2 * Copyright (c) 2016 Andreas Färber
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This library is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This library is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
43 #include <dt-bindings/gpio/gpio.h>
44 #include <dt-bindings/interrupt-controller/irq.h>
45 #include <dt-bindings/interrupt-controller/arm-gic.h>
48 compatible = "amlogic,meson-gxbb";
49 interrupt-parent = <&gic>;
54 #address-cells = <0x2>;
59 compatible = "arm,cortex-a53", "arm,armv8";
61 enable-method = "psci";
66 compatible = "arm,cortex-a53", "arm,armv8";
68 enable-method = "psci";
73 compatible = "arm,cortex-a53", "arm,armv8";
75 enable-method = "psci";
80 compatible = "arm,cortex-a53", "arm,armv8";
82 enable-method = "psci";
87 compatible = "arm,cortex-a53-pmu";
88 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
89 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
90 <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
91 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
92 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
96 compatible = "arm,psci-0.2";
101 compatible = "arm,armv8-timer";
102 interrupts = <GIC_PPI 13
103 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
105 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
107 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
109 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
113 compatible = "fixed-clock";
114 clock-frequency = <24000000>;
115 clock-output-names = "xtal";
120 compatible = "simple-bus";
121 #address-cells = <2>;
125 cbus: cbus@c1100000 {
126 compatible = "simple-bus";
127 reg = <0x0 0xc1100000 0x0 0x100000>;
128 #address-cells = <2>;
130 ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
132 uart_A: serial@84c0 {
133 compatible = "amlogic,meson-uart";
134 reg = <0x0 0x084c0 0x0 0x14>;
135 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
141 gic: interrupt-controller@c4301000 {
142 compatible = "arm,gic-400";
143 reg = <0x0 0xc4301000 0 0x1000>,
144 <0x0 0xc4302000 0 0x2000>,
145 <0x0 0xc4304000 0 0x2000>,
146 <0x0 0xc4306000 0 0x2000>;
147 interrupt-controller;
148 interrupts = <GIC_PPI 9
149 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
150 #interrupt-cells = <3>;
151 #address-cells = <0>;
154 aobus: aobus@c8100000 {
155 compatible = "simple-bus";
156 reg = <0x0 0xc8100000 0x0 0x100000>;
157 #address-cells = <2>;
159 ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
161 uart_AO: serial@4c0 {
162 compatible = "amlogic,meson-uart";
163 reg = <0x0 0x004c0 0x0 0x14>;
164 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
171 compatible = "simple-bus";
172 reg = <0x0 0xd0000000 0x0 0x200000>;
173 #address-cells = <2>;
175 ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;