arm: zynq: Add board support for cc108
[oweals/u-boot.git] / arch / arm / dts / imx7ulp-evk.dts
1 /*
2  * Copyright 2016 Freescale Semiconductor, Inc.
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8
9 /dts-v1/;
10
11 #include "imx7ulp.dtsi"
12
13 / {
14         model = "NXP i.MX7ULP EVK";
15         compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp", "Generic DT based system";
16
17         chosen {
18                 bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x402D0010,115200";
19                 stdout-path = &lpuart4;
20         };
21
22         bcmdhd_wlan_0: bcmdhd_wlan@0 {
23                 compatible = "android,bcmdhd_wlan";
24                 wlreg_on-supply = <&wlreg_on>;
25                 bcmdhd_fw = "/lib/firmware/bcm/1DX_BCM4343W/fw_bcmdhd.bin";
26                 bcmdhd_nv = "/lib/firmware/bcm/1DX_BCM4343W/bcmdhd.1DX.SDIO.cal";
27         };
28
29         memory {
30                 device_type = "memory";
31                 reg = <0x60000000 0x40000000>;
32         };
33
34         backlight {
35                 compatible = "gpio-backlight";
36                 pinctrl-names = "default";
37                 pinctrl-0 = <&pinctrl_backlight>;
38                 gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
39                 default-on;
40                 status = "okay";
41         };
42
43         mipi_dsi_reset: mipi-dsi-reset {
44                 compatible = "gpio-reset";
45                 reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
46                 reset-delay-us = <1000>;
47                 #reset-cells = <0>;
48         };
49
50         regulators {
51                 compatible = "simple-bus";
52                 #address-cells = <1>;
53                 #size-cells = <0>;
54
55                 wlreg_on: fixedregulator@100 {
56                         compatible = "regulator-fixed";
57                         regulator-min-microvolt = <5000000>;
58                         regulator-max-microvolt = <5000000>;
59                         regulator-name = "wlreg_on";
60                         gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
61                         startup-delay-us = <100>;
62                         enable-active-high;
63                 };
64
65                 reg_usb_otg1_vbus: regulator@0 {
66                         compatible = "regulator-fixed";
67                         reg = <0>;
68                         pinctrl-names = "default";
69                         pinctrl-0 = <&pinctrl_usb_otg1>;
70                         regulator-name = "usb_otg1_vbus";
71                         regulator-min-microvolt = <5000000>;
72                         regulator-max-microvolt = <5000000>;
73                         gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
74                         enable-active-high;
75                 };
76
77                 reg_vsd_3v3: regulator@1 {
78                         compatible = "regulator-fixed";
79                         reg = <1>;
80                         regulator-name = "VSD_3V3";
81                         regulator-min-microvolt = <3300000>;
82                         regulator-max-microvolt = <3300000>;
83                         gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
84                         enable-active-high;
85                 };
86
87                 reg_vsd_3v3b: regulator@2 {
88                         compatible = "regulator-fixed";
89                         reg = <2>;
90                         regulator-name = "VSD_3V3B";
91                         regulator-min-microvolt = <3300000>;
92                         regulator-max-microvolt = <3300000>;
93                         gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
94                         enable-active-high;
95                 };
96         };
97
98         extcon_usb1: extcon_usb1 {
99                 compatible = "linux,extcon-usb-gpio";
100                 id-gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
101                 pinctrl-names = "default";
102                 pinctrl-0 = <&pinctrl_extcon_usb1>;
103         };
104
105         pf1550-rpmsg {
106                 compatible = "fsl,pf1550-rpmsg";
107                 sw1_reg: SW1 {
108                                 regulator-name = "SW1";
109                                 regulator-min-microvolt = <600000>;
110                                 regulator-max-microvolt = <1387500>;
111                                 regulator-boot-on;
112                                 regulator-always-on;
113                 };
114
115                 sw2_reg: SW2 {
116                                 regulator-name = "SW2";
117                                 regulator-min-microvolt = <600000>;
118                                 regulator-max-microvolt = <1387500>;
119                                 regulator-boot-on;
120                                 regulator-always-on;
121                 };
122
123                 sw3_reg: SW3 {
124                                 regulator-name = "SW3";
125                                 regulator-min-microvolt = <1800000>;
126                                 regulator-max-microvolt = <3300000>;
127                                 regulator-boot-on;
128                                 regulator-always-on;
129                 };
130
131                 vref_reg: VREFDDR {
132                                 regulator-name = "VREFDDR";
133                                 regulator-min-microvolt = <1200000>;
134                                 regulator-max-microvolt = <1200000>;
135                                 regulator-boot-on;
136                                 regulator-always-on;
137                 };
138
139                 vldo1_reg: LDO1 {
140                                 regulator-name = "LDO1";
141                                 regulator-min-microvolt = <750000>;
142                                 regulator-max-microvolt = <3300000>;
143                                 regulator-always-on;
144                 };
145
146                 vldo2_reg: LDO2 {
147                                 regulator-name = "LDO2";
148                                 regulator-min-microvolt = <1800000>;
149                                 regulator-max-microvolt = <3300000>;
150                                 regulator-always-on;
151                 };
152
153                 vldo3_reg: LDO3 {
154                                 regulator-name = "LDO3";
155                                 regulator-min-microvolt = <750000>;
156                                 regulator-max-microvolt = <3300000>;
157                                 regulator-always-on;
158                 };
159         };
160 };
161
162 &iomuxc1 {
163         pinctrl-names = "default";
164         pinctrl-0 = <&pinctrl_hog_1>;
165
166         imx7ulp-evk {
167                 pinctrl_hog_1: hoggrp-1 {
168                         fsl,pins = <
169                                 ULP1_PAD_PTC10__PTC10           0x30100         /* USDHC0 CD */
170                                 ULP1_PAD_PTC1__PTC1             0x20100
171                                 ULP1_PAD_PTD0__PTD0             0x30100         /* USDHC0 RST */
172                                 ULP1_PAD_PTE13__PTE13           0x30103         /* USDHC1 CD */
173                                 ULP1_PAD_PTE12__PTE12           0x30103         /* USDHC1 WP */
174                                 ULP1_PAD_PTE14__SDHC1_VS        0x843           /* USDHC1 VSEL */
175                         >;
176                 };
177
178                 pinctrl_backlight: backlight_grp {
179                         fsl,pins = <
180                                 ULP1_PAD_PTF2__PTF2             0x20100
181                         >;
182                 };
183
184                 pinctrl_lpi2c5: lpi2c5grp {
185                         fsl,pins = <
186                                 ULP1_PAD_PTC4__LPI2C5_SCL       0x527
187                                 ULP1_PAD_PTC5__LPI2C5_SDA       0x527
188                         >;
189                 };
190
191                 pinctrl_mipi_dsi_reset: mipi_dsi_reset_grp {
192                         fsl,pins = <
193                                 ULP1_PAD_PTC19__PTC19           0x20103
194                         >;
195                 };
196
197                 pinctrl_lpuart4: lpuart4grp {
198                         fsl,pins = <
199                                 ULP1_PAD_PTC3__LPUART4_RX       0x400
200                                 ULP1_PAD_PTC2__LPUART4_TX       0x400
201                         >;
202                 };
203
204                 pinctrl_lpuart6: lpuart6grp {
205                         fsl,pins = <
206                                 ULP1_PAD_PTE10__LPUART6_TX      0x400
207                                 ULP1_PAD_PTE11__LPUART6_RX      0x400
208                                 ULP1_PAD_PTE9__LPUART6_RTS_B    0x400
209                                 ULP1_PAD_PTE8__LPUART6_CTS_B    0x400
210                                 ULP1_PAD_PTE7__PTE7             0x00 /* BT_REG_ON */
211                         >;
212                 };
213
214                 pinctrl_lpuart7: lpuart7grp {
215                         fsl,pins = <
216                                 ULP1_PAD_PTF14__LPUART7_TX      0x400
217                                 ULP1_PAD_PTF15__LPUART7_RX      0x400
218                                 ULP1_PAD_PTF13__LPUART7_RTS_B   0x400
219                                 ULP1_PAD_PTF12__LPUART7_CTS_B   0x400
220                         >;
221                 };
222
223                 pinctrl_usdhc0: usdhc0grp {
224                         fsl,pins = <
225                                 ULP1_PAD_PTD1__SDHC0_CMD        0x843
226                                 ULP1_PAD_PTD2__SDHC0_CLK        0x10843
227                                 ULP1_PAD_PTD7__SDHC0_D3         0x843
228                                 ULP1_PAD_PTD8__SDHC0_D2         0x843
229                                 ULP1_PAD_PTD9__SDHC0_D1         0x843
230                                 ULP1_PAD_PTD10__SDHC0_D0        0x843
231                         >;
232                 };
233
234                 pinctrl_usdhc0_8bit: usdhc0grp_8bit {
235                         fsl,pins = <
236                                 ULP1_PAD_PTD1__SDHC0_CMD        0x843
237                                 ULP1_PAD_PTD2__SDHC0_CLK        0x843
238                                 ULP1_PAD_PTD3__SDHC0_D7         0x843
239                                 ULP1_PAD_PTD4__SDHC0_D6         0x843
240                                 ULP1_PAD_PTD5__SDHC0_D5         0x843
241                                 ULP1_PAD_PTD6__SDHC0_D4         0x843
242                                 ULP1_PAD_PTD7__SDHC0_D3         0x843
243                                 ULP1_PAD_PTD8__SDHC0_D2         0x843
244                                 ULP1_PAD_PTD9__SDHC0_D1         0x843
245                                 ULP1_PAD_PTD10__SDHC0_D0        0x843
246                         >;
247                 };
248
249                 pinctrl_lpi2c7: lpi2c7grp {
250                         fsl,pins = <
251                                 ULP1_PAD_PTF12__LPI2C7_SCL      0x527
252                                 ULP1_PAD_PTF13__LPI2C7_SDA      0x527
253                         >;
254                 };
255
256                 pinctrl_lpspi3: lpspi3grp {
257                         fsl,pins = <
258                                 ULP1_PAD_PTF16__LPSPI3_SIN      0x300
259                                 ULP1_PAD_PTF17__LPSPI3_SOUT     0x300
260                                 ULP1_PAD_PTF18__LPSPI3_SCK      0x300
261                                 ULP1_PAD_PTF19__LPSPI3_PCS0     0x300
262                         >;
263                 };
264
265                 pinctrl_usb_otg1: usbotg1grp {
266                         fsl,pins = <
267                                 ULP1_PAD_PTC0__PTC0             0x30100
268                         >;
269                 };
270
271                 pinctrl_extcon_usb1: extcon1grp {
272                         fsl,pins = <
273                                 ULP1_PAD_PTC8__PTC8             0x30103
274                         >;
275                 };
276
277                 pinctrl_usdhc1: usdhc1grp {
278                         fsl,pins = <
279                                 ULP1_PAD_PTE3__SDHC1_CMD        0x843
280                                 ULP1_PAD_PTE2__SDHC1_CLK        0x843
281                                 ULP1_PAD_PTE1__SDHC1_D0         0x843
282                                 ULP1_PAD_PTE0__SDHC1_D1         0x843
283                                 ULP1_PAD_PTE5__SDHC1_D2         0x843
284                                 ULP1_PAD_PTE4__SDHC1_D3         0x843
285                         >;
286                 };
287
288                 pinctrl_usdhc1_rst: usdhc1grp_rst {
289                         fsl,pins = <
290                                 ULP1_PAD_PTE11__PTE11                   0x30100 /* USDHC1 RST */
291                         >;
292                 };
293
294                 pinctrl_wifi: wifigrp {
295                         fsl,pins = <
296                                 ULP1_PAD_PTE6__PTE6             0x43 /* WL_REG_ON */
297                         >;
298                 };
299         };
300 };
301
302 &lcdif {
303         status = "okay";
304         disp-dev = "mipi_dsi_northwest";
305         display = <&display0>;
306
307         display0: display {
308                 bits-per-pixel = <16>;
309                 bus-width = <24>;
310
311                 display-timings {
312                         native-mode = <&timing0>;
313                         timing0: timing0 {
314                         clock-frequency = <9200000>;
315                         hactive = <480>;
316                         vactive = <272>;
317                         hfront-porch = <8>;
318                         hback-porch = <4>;
319                         hsync-len = <41>;
320                         vback-porch = <2>;
321                         vfront-porch = <4>;
322                         vsync-len = <10>;
323
324                         hsync-active = <0>;
325                         vsync-active = <0>;
326                         de-active = <1>;
327                         pixelclk-active = <0>;
328                         };
329                 };
330         };
331 };
332
333 &lpi2c7 {
334         #address-cells = <1>;
335         #size-cells = <0>;
336         pinctrl-names = "default";
337         pinctrl-0 = <&pinctrl_lpi2c7>;
338 };
339
340 &lpi2c5 {
341         #address-cells = <1>;
342         #size-cells = <0>;
343         pinctrl-names = "default";
344         pinctrl-0 = <&pinctrl_lpi2c5>;
345         status = "okay";
346
347         fxas2100x@20 {
348                 compatible = "fsl,fxas2100x";
349                 reg = <0x20>;
350         };
351
352         fxos8700@1e {
353                 compatible = "fsl,fxos8700";
354                 reg = <0x1e>;
355         };
356
357         mpl3115@60 {
358                 compatible = "fsl,mpl3115";
359                 reg = <0x60>;
360         };
361 };
362
363 &lpspi3 {
364         #address-cells = <1>;
365         #size-cells = <0>;
366         pinctrl-names = "default";
367         pinctrl-0 = <&pinctrl_lpspi3>;
368         status = "okay";
369
370         spidev0: spi@0 {
371                 reg = <0>;
372                 compatible = "rohm,dh2228fv";
373                 spi-max-frequency = <1000000>;
374         };
375 };
376
377 &mipi_dsi {
378         pinctrl-names = "default";
379         pinctrl-0 = <&pinctrl_mipi_dsi_reset>;
380         lcd_panel = "TRULY-WVGA-TFT3P5581E";
381         resets = <&mipi_dsi_reset>;
382         status = "okay";
383 };
384
385 &lpuart4 { /* console */
386         pinctrl-names = "default";
387         pinctrl-0 = <&pinctrl_lpuart4>;
388         status = "okay";
389 };
390
391 &lpuart6 { /* BT */
392         pinctrl-names = "default";
393         pinctrl-0 = <&pinctrl_lpuart6>;
394         status = "okay";
395 };
396
397 &lpuart7 { /* Uart test */
398         pinctrl-names = "default";
399         pinctrl-0 = <&pinctrl_lpuart7>;
400         status = "disabled";
401 };
402
403 &rpmsg{
404         status = "okay";
405 };
406
407 &usbotg1 {
408         vbus-supply = <&reg_usb_otg1_vbus>;
409         extcon = <0>, <&extcon_usb1>;
410         srp-disable;
411         hnp-disable;
412         adp-disable;
413         status = "okay";
414 };
415
416 &usdhc0 {
417         pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
418         pinctrl-0 = <&pinctrl_usdhc0>;
419         pinctrl-1 = <&pinctrl_usdhc0>;
420         pinctrl-2 = <&pinctrl_usdhc0>;
421         pinctrl-3 = <&pinctrl_usdhc0>;
422         cd-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
423         vmmc-supply = <&reg_vsd_3v3>;
424         vqmmc-supply = <&vldo2_reg>;
425         status = "okay";
426 };