arch/arm/dts/imx6ul.dtsi

   1 /*
   2  * Copyright 2015 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 #include <dt-bindings/clock/imx6ul-clock.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/input/input.h>
  12 #include <dt-bindings/interrupt-controller/arm-gic.h>
  13 #include "imx6ul-pinfunc.h"
  14 #include "skeleton.dtsi"
  15
  16 / {
  17         aliases {
  18                 ethernet0 = &fec1;
  19                 ethernet1 = &fec2;
  20                 gpio0 = &gpio1;
  21                 gpio1 = &gpio2;
  22                 gpio2 = &gpio3;
  23                 gpio3 = &gpio4;
  24                 gpio4 = &gpio5;
  25                 i2c0 = &i2c1;
  26                 i2c1 = &i2c2;
  27                 i2c2 = &i2c3;
  28                 i2c3 = &i2c4;
  29                 mmc0 = &usdhc1;
  30                 mmc1 = &usdhc2;
  31                 serial0 = &uart1;
  32                 serial1 = &uart2;
  33                 serial2 = &uart3;
  34                 serial3 = &uart4;
  35                 serial4 = &uart5;
  36                 serial5 = &uart6;
  37                 serial6 = &uart7;
  38                 serial7 = &uart8;
  39                 sai1 = &sai1;
  40                 sai2 = &sai2;
  41                 sai3 = &sai3;
  42                 spi0 = &ecspi1;
  43                 spi1 = &ecspi2;
  44                 spi2 = &ecspi3;
  45                 spi3 = &ecspi4;
  46                 usbotg0 = &usbotg1;
  47                 usbotg1 = &usbotg2;
  48                 usbphy0 = &usbphy1;
  49                 usbphy1 = &usbphy2;
  50         };
  51
  52         cpus {
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55
  56                 cpu0: cpu@0 {
  57                         compatible = "arm,cortex-a7";
  58                         device_type = "cpu";
  59                         reg = <0>;
  60                         clock-latency = <61036>; /* two CLK32 periods */
  61                         operating-points = <
  62                                 /* kHz  uV */
  63                                 528000  1175000
  64                                 396000  1025000
  65                                 198000  950000
  66                         >;
  67                         fsl,soc-operating-points = <
  68                                 /* KHz  uV */
  69                                 528000  1175000
  70                                 396000  1175000
  71                                 198000  1175000
  72                         >;
  73                         clocks = <&clks IMX6UL_CLK_ARM>,
  74                                  <&clks IMX6UL_CLK_PLL2_BUS>,
  75                                  <&clks IMX6UL_CLK_PLL2_PFD2>,
  76                                  <&clks IMX6UL_CA7_SECONDARY_SEL>,
  77                                  <&clks IMX6UL_CLK_STEP>,
  78                                  <&clks IMX6UL_CLK_PLL1_SW>,
  79                                  <&clks IMX6UL_CLK_PLL1_SYS>,
  80                                  <&clks IMX6UL_PLL1_BYPASS>,
  81                                  <&clks IMX6UL_CLK_PLL1>,
  82                                  <&clks IMX6UL_PLL1_BYPASS_SRC>,
  83                                  <&clks IMX6UL_CLK_OSC>;
  84                         clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
  85                                       "secondary_sel", "step", "pll1_sw",
  86                                       "pll1_sys", "pll1_bypass", "pll1",
  87                                       "pll1_bypass_src", "osc";
  88                         arm-supply = <&reg_arm>;
  89                         soc-supply = <&reg_soc>;
  90                 };
  91         };
  92
  93         intc: interrupt-controller@00a01000 {
  94                 compatible = "arm,cortex-a7-gic";
  95                 #interrupt-cells = <3>;
  96                 interrupt-controller;
  97                 reg = <0x00a01000 0x1000>,
  98                       <0x00a02000 0x1000>,
  99                       <0x00a04000 0x2000>,
 100                       <0x00a06000 0x2000>;
 101         };
 102
 103         ckil: clock-cli {
 104                 compatible = "fixed-clock";
 105                 #clock-cells = <0>;
 106                 clock-frequency = <32768>;
 107                 clock-output-names = "ckil";
 108         };
 109
 110         osc: clock-osc {
 111                 compatible = "fixed-clock";
 112                 #clock-cells = <0>;
 113                 clock-frequency = <24000000>;
 114                 clock-output-names = "osc";
 115         };
 116
 117         ipp_di0: clock-di0 {
 118                 compatible = "fixed-clock";
 119                 #clock-cells = <0>;
 120                 clock-frequency = <0>;
 121                 clock-output-names = "ipp_di0";
 122         };
 123
 124         ipp_di1: clock-di1 {
 125                 compatible = "fixed-clock";
 126                 #clock-cells = <0>;
 127                 clock-frequency = <0>;
 128                 clock-output-names = "ipp_di1";
 129         };
 130
 131         soc {
 132                 #address-cells = <1>;
 133                 #size-cells = <1>;
 134                 compatible = "simple-bus";
 135                 interrupt-parent = <&gpc>;
 136                 ranges;
 137
 138                 pmu {
 139                         compatible = "arm,cortex-a7-pmu";
 140                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 141                         status = "disabled";
 142                 };
 143
 144                 ocram: sram@00900000 {
 145                         compatible = "mmio-sram";
 146                         reg = <0x00900000 0x20000>;
 147                 };
 148
 149                 dma_apbh: dma-apbh@01804000 {
 150                         compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 151                         reg = <0x01804000 0x2000>;
 152                         interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
 153                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
 154                                      <0 13 IRQ_TYPE_LEVEL_HIGH>,
 155                                      <0 13 IRQ_TYPE_LEVEL_HIGH>;
 156                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 157                         #dma-cells = <1>;
 158                         dma-channels = <4>;
 159                         clocks = <&clks IMX6UL_CLK_APBHDMA>;
 160                 };
 161
 162                 gpmi: gpmi-nand@01806000         {
 163                         compatible = "fsl,imx6q-gpmi-nand";
 164                         #address-cells = <1>;
 165                         #size-cells = <1>;
 166                         reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
 167                         reg-names = "gpmi-nand", "bch";
 168                         interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
 169                         interrupt-names = "bch";
 170                         clocks = <&clks IMX6UL_CLK_GPMI_IO>,
 171                                  <&clks IMX6UL_CLK_GPMI_APB>,
 172                                  <&clks IMX6UL_CLK_GPMI_BCH>,
 173                                  <&clks IMX6UL_CLK_GPMI_BCH_APB>,
 174                                  <&clks IMX6UL_CLK_PER_BCH>;
 175                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 176                                       "gpmi_bch_apb", "per1_bch";
 177                         dmas = <&dma_apbh 0>;
 178                         dma-names = "rx-tx";
 179                         status = "disabled";
 180                 };
 181
 182                 aips1: aips-bus@02000000 {
 183                         compatible = "fsl,aips-bus", "simple-bus";
 184                         #address-cells = <1>;
 185                         #size-cells = <1>;
 186                         reg = <0x02000000 0x100000>;
 187                         ranges;
 188
 189                         spba-bus@02000000 {
 190                                 compatible = "fsl,spba-bus", "simple-bus";
 191                                 #address-cells = <1>;
 192                                 #size-cells = <1>;
 193                                 reg = <0x02000000 0x40000>;
 194                                 ranges;
 195                                 u-boot,dm-spl;
 196
 197                                 ecspi1: ecspi@02008000 {
 198                                         #address-cells = <1>;
 199                                         #size-cells = <0>;
 200                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 201                                         reg = <0x02008000 0x4000>;
 202                                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 203                                         clocks = <&clks IMX6UL_CLK_ECSPI1>,
 204                                                  <&clks IMX6UL_CLK_ECSPI1>;
 205                                         clock-names = "ipg", "per";
 206                                         status = "disabled";
 207                                 };
 208
 209                                 ecspi2: ecspi@0200c000 {
 210                                         #address-cells = <1>;
 211                                         #size-cells = <0>;
 212                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 213                                         reg = <0x0200c000 0x4000>;
 214                                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 215                                         clocks = <&clks IMX6UL_CLK_ECSPI2>,
 216                                                  <&clks IMX6UL_CLK_ECSPI2>;
 217                                         clock-names = "ipg", "per";
 218                                         status = "disabled";
 219                                 };
 220
 221                                 ecspi3: ecspi@02010000 {
 222                                         #address-cells = <1>;
 223                                         #size-cells = <0>;
 224                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 225                                         reg = <0x02010000 0x4000>;
 226                                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 227                                         clocks = <&clks IMX6UL_CLK_ECSPI3>,
 228                                                  <&clks IMX6UL_CLK_ECSPI3>;
 229                                         clock-names = "ipg", "per";
 230                                         status = "disabled";
 231                                 };
 232
 233                                 ecspi4: ecspi@02014000 {
 234                                         #address-cells = <1>;
 235                                         #size-cells = <0>;
 236                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 237                                         reg = <0x02014000 0x4000>;
 238                                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 239                                         clocks = <&clks IMX6UL_CLK_ECSPI4>,
 240                                                  <&clks IMX6UL_CLK_ECSPI4>;
 241                                         clock-names = "ipg", "per";
 242                                         status = "disabled";
 243                                 };
 244
 245                                 uart7: serial@02018000 {
 246                                         compatible = "fsl,imx6ul-uart",
 247                                                      "fsl,imx6q-uart";
 248                                         reg = <0x02018000 0x4000>;
 249                                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 250                                         clocks = <&clks IMX6UL_CLK_UART7_IPG>,
 251                                                  <&clks IMX6UL_CLK_UART7_SERIAL>;
 252                                         clock-names = "ipg", "per";
 253                                         status = "disabled";
 254                                 };
 255
 256                                 uart1: serial@02020000 {
 257                                         compatible = "fsl,imx6ul-uart",
 258                                                      "fsl,imx6q-uart";
 259                                         reg = <0x02020000 0x4000>;
 260                                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 261                                         clocks = <&clks IMX6UL_CLK_UART1_IPG>,
 262                                                  <&clks IMX6UL_CLK_UART1_SERIAL>;
 263                                         clock-names = "ipg", "per";
 264                                         status = "disabled";
 265                                 };
 266
 267                                 uart8: serial@02024000 {
 268                                         compatible = "fsl,imx6ul-uart",
 269                                                      "fsl,imx6q-uart";
 270                                         reg = <0x02024000 0x4000>;
 271                                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 272                                         clocks = <&clks IMX6UL_CLK_UART8_IPG>,
 273                                                  <&clks IMX6UL_CLK_UART8_SERIAL>;
 274                                         clock-names = "ipg", "per";
 275                                         status = "disabled";
 276                                 };
 277
 278                                 sai1: sai@02028000 {
 279                                         #sound-dai-cells = <0>;
 280                                         compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 281                                         reg = <0x02028000 0x4000>;
 282                                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 283                                         clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
 284                                                  <&clks IMX6UL_CLK_SAI1>,
 285                                                  <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
 286                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 287                                         dmas = <&sdma 35 24 0>,
 288                                                <&sdma 36 24 0>;
 289                                         dma-names = "rx", "tx";
 290                                         status = "disabled";
 291                                 };
 292
 293                                 sai2: sai@0202c000 {
 294                                         #sound-dai-cells = <0>;
 295                                         compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 296                                         reg = <0x0202c000 0x4000>;
 297                                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 298                                         clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
 299                                                  <&clks IMX6UL_CLK_SAI2>,
 300                                                  <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
 301                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 302                                         dmas = <&sdma 37 24 0>,
 303                                                <&sdma 38 24 0>;
 304                                         dma-names = "rx", "tx";
 305                                         status = "disabled";
 306                                 };
 307
 308                                 sai3: sai@02030000 {
 309                                         #sound-dai-cells = <0>;
 310                                         compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
 311                                         reg = <0x02030000 0x4000>;
 312                                         interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 313                                         clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
 314                                                  <&clks IMX6UL_CLK_SAI3>,
 315                                                  <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
 316                                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 317                                         dmas = <&sdma 39 24 0>,
 318                                                <&sdma 40 24 0>;
 319                                         dma-names = "rx", "tx";
 320                                         status = "disabled";
 321                                 };
 322                         };
 323
 324                         tsc: tsc@02040000 {
 325                                 compatible = "fsl,imx6ul-tsc";
 326                                 reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
 327                                 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
 328                                              <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 329                                 clocks = <&clks IMX6UL_CLK_IPG>,
 330                                          <&clks IMX6UL_CLK_ADC2>;
 331                                 clock-names = "tsc", "adc";
 332                                 status = "disabled";
 333                         };
 334
 335                         pwm1: pwm@02080000 {
 336                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 337                                 reg = <0x02080000 0x4000>;
 338                                 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 339                                 clocks = <&clks IMX6UL_CLK_PWM1>,
 340                                          <&clks IMX6UL_CLK_PWM1>;
 341                                 clock-names = "ipg", "per";
 342                                 #pwm-cells = <2>;
 343                                 status = "disabled";
 344                         };
 345
 346                         pwm2: pwm@02084000 {
 347                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 348                                 reg = <0x02084000 0x4000>;
 349                                 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 350                                 clocks = <&clks IMX6UL_CLK_PWM2>,
 351                                          <&clks IMX6UL_CLK_PWM2>;
 352                                 clock-names = "ipg", "per";
 353                                 #pwm-cells = <2>;
 354                                 status = "disabled";
 355                         };
 356
 357                         pwm3: pwm@02088000 {
 358                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 359                                 reg = <0x02088000 0x4000>;
 360                                 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 361                                 clocks = <&clks IMX6UL_CLK_PWM3>,
 362                                          <&clks IMX6UL_CLK_PWM3>;
 363                                 clock-names = "ipg", "per";
 364                                 #pwm-cells = <2>;
 365                                 status = "disabled";
 366                         };
 367
 368                         pwm4: pwm@0208c000 {
 369                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 370                                 reg = <0x0208c000 0x4000>;
 371                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 372                                 clocks = <&clks IMX6UL_CLK_PWM4>,
 373                                          <&clks IMX6UL_CLK_PWM4>;
 374                                 clock-names = "ipg", "per";
 375                                 #pwm-cells = <2>;
 376                                 status = "disabled";
 377                         };
 378
 379                         can1: flexcan@02090000 {
 380                                 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
 381                                 reg = <0x02090000 0x4000>;
 382                                 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 383                                 clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
 384                                          <&clks IMX6UL_CLK_CAN1_SERIAL>;
 385                                 clock-names = "ipg", "per";
 386                                 status = "disabled";
 387                         };
 388
 389                         can2: flexcan@02094000 {
 390                                 compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
 391                                 reg = <0x02094000 0x4000>;
 392                                 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 393                                 clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
 394                                          <&clks IMX6UL_CLK_CAN2_SERIAL>;
 395                                 clock-names = "ipg", "per";
 396                                 status = "disabled";
 397                         };
 398
 399                         gpt1: gpt@02098000 {
 400                                 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 401                                 reg = <0x02098000 0x4000>;
 402                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 403                                 clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
 404                                          <&clks IMX6UL_CLK_GPT1_SERIAL>;
 405                                 clock-names = "ipg", "per";
 406                         };
 407
 408                         gpio1: gpio@0209c000 {
 409                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 410                                 reg = <0x0209c000 0x4000>;
 411                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 412                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 413                                 gpio-controller;
 414                                 #gpio-cells = <2>;
 415                                 interrupt-controller;
 416                                 #interrupt-cells = <2>;
 417                                 gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
 418                                               <&iomuxc 16 33 16>;
 419                         };
 420
 421                         gpio2: gpio@020a0000 {
 422                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 423                                 reg = <0x020a0000 0x4000>;
 424                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 425                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 426                                 gpio-controller;
 427                                 #gpio-cells = <2>;
 428                                 interrupt-controller;
 429                                 #interrupt-cells = <2>;
 430                                 gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
 431                         };
 432
 433                         gpio3: gpio@020a4000 {
 434                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 435                                 reg = <0x020a4000 0x4000>;
 436                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 437                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 438                                 gpio-controller;
 439                                 #gpio-cells = <2>;
 440                                 interrupt-controller;
 441                                 #interrupt-cells = <2>;
 442                                 gpio-ranges = <&iomuxc 0 65 29>;
 443                         };
 444
 445                         gpio4: gpio@020a8000 {
 446                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 447                                 reg = <0x020a8000 0x4000>;
 448                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 449                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 450                                 gpio-controller;
 451                                 #gpio-cells = <2>;
 452                                 interrupt-controller;
 453                                 #interrupt-cells = <2>;
 454                                 gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
 455                         };
 456
 457                         gpio5: gpio@020ac000 {
 458                                 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
 459                                 reg = <0x020ac000 0x4000>;
 460                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 461                                              <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 462                                 gpio-controller;
 463                                 #gpio-cells = <2>;
 464                                 interrupt-controller;
 465                                 #interrupt-cells = <2>;
 466                                 gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
 467                         };
 468
 469                         fec2: ethernet@020b4000 {
 470                                 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
 471                                 reg = <0x020b4000 0x4000>;
 472                                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 473                                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 474                                 clocks = <&clks IMX6UL_CLK_ENET>,
 475                                          <&clks IMX6UL_CLK_ENET_AHB>,
 476                                          <&clks IMX6UL_CLK_ENET_PTP>,
 477                                          <&clks IMX6UL_CLK_ENET2_REF_125M>,
 478                                          <&clks IMX6UL_CLK_ENET2_REF_125M>;
 479                                 clock-names = "ipg", "ahb", "ptp",
 480                                               "enet_clk_ref", "enet_out";
 481                                 fsl,num-tx-queues=<1>;
 482                                 fsl,num-rx-queues=<1>;
 483                                 status = "disabled";
 484                         };
 485
 486                         kpp: kpp@020b8000 {
 487                                 compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
 488                                 reg = <0x020b8000 0x4000>;
 489                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 490                                 clocks = <&clks IMX6UL_CLK_KPP>;
 491                                 status = "disabled";
 492                         };
 493
 494                         wdog1: wdog@020bc000 {
 495                                 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 496                                 reg = <0x020bc000 0x4000>;
 497                                 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 498                                 clocks = <&clks IMX6UL_CLK_WDOG1>;
 499                         };
 500
 501                         wdog2: wdog@020c0000 {
 502                                 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 503                                 reg = <0x020c0000 0x4000>;
 504                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 505                                 clocks = <&clks IMX6UL_CLK_WDOG2>;
 506                                 status = "disabled";
 507                         };
 508
 509                         clks: ccm@020c4000 {
 510                                 compatible = "fsl,imx6ul-ccm";
 511                                 reg = <0x020c4000 0x4000>;
 512                                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
 513                                              <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 514                                 #clock-cells = <1>;
 515                                 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
 516                                 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
 517                         };
 518
 519                         anatop: anatop@020c8000 {
 520                                 compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
 521                                              "syscon", "simple-bus";
 522                                 reg = <0x020c8000 0x1000>;
 523                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 524                                              <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 525                                              <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 526
 527                                 reg_3p0: regulator-3p0 {
 528                                         compatible = "fsl,anatop-regulator";
 529                                         regulator-name = "vdd3p0";
 530                                         regulator-min-microvolt = <2625000>;
 531                                         regulator-max-microvolt = <3400000>;
 532                                         anatop-reg-offset = <0x120>;
 533                                         anatop-vol-bit-shift = <8>;
 534                                         anatop-vol-bit-width = <5>;
 535                                         anatop-min-bit-val = <0>;
 536                                         anatop-min-voltage = <2625000>;
 537                                         anatop-max-voltage = <3400000>;
 538                                         anatop-enable-bit = <0>;
 539                                 };
 540
 541                                 reg_arm: regulator-vddcore {
 542                                         compatible = "fsl,anatop-regulator";
 543                                         regulator-name = "cpu";
 544                                         regulator-min-microvolt = <725000>;
 545                                         regulator-max-microvolt = <1450000>;
 546                                         regulator-always-on;
 547                                         anatop-reg-offset = <0x140>;
 548                                         anatop-vol-bit-shift = <0>;
 549                                         anatop-vol-bit-width = <5>;
 550                                         anatop-delay-reg-offset = <0x170>;
 551                                         anatop-delay-bit-shift = <24>;
 552                                         anatop-delay-bit-width = <2>;
 553                                         anatop-min-bit-val = <1>;
 554                                         anatop-min-voltage = <725000>;
 555                                         anatop-max-voltage = <1450000>;
 556                                 };
 557
 558                                 reg_soc: regulator-vddsoc {
 559                                         compatible = "fsl,anatop-regulator";
 560                                         regulator-name = "vddsoc";
 561                                         regulator-min-microvolt = <725000>;
 562                                         regulator-max-microvolt = <1450000>;
 563                                         regulator-always-on;
 564                                         anatop-reg-offset = <0x140>;
 565                                         anatop-vol-bit-shift = <18>;
 566                                         anatop-vol-bit-width = <5>;
 567                                         anatop-delay-reg-offset = <0x170>;
 568                                         anatop-delay-bit-shift = <28>;
 569                                         anatop-delay-bit-width = <2>;
 570                                         anatop-min-bit-val = <1>;
 571                                         anatop-min-voltage = <725000>;
 572                                         anatop-max-voltage = <1450000>;
 573                                 };
 574                         };
 575
 576                         usbphy1: usbphy@020c9000 {
 577                                 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
 578                                 reg = <0x020c9000 0x1000>;
 579                                 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 580                                 clocks = <&clks IMX6UL_CLK_USBPHY1>;
 581                                 phy-3p0-supply = <&reg_3p0>;
 582                                 fsl,anatop = <&anatop>;
 583                         };
 584
 585                         usbphy2: usbphy@020ca000 {
 586                                 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
 587                                 reg = <0x020ca000 0x1000>;
 588                                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 589                                 clocks = <&clks IMX6UL_CLK_USBPHY2>;
 590                                 phy-3p0-supply = <&reg_3p0>;
 591                                 fsl,anatop = <&anatop>;
 592                         };
 593
 594                         snvs: snvs@020cc000 {
 595                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 596                                 reg = <0x020cc000 0x4000>;
 597
 598                                 snvs_rtc: snvs-rtc-lp {
 599                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 600                                         regmap = <&snvs>;
 601                                         offset = <0x34>;
 602                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 603                                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 604                                 };
 605
 606                                 snvs_poweroff: snvs-poweroff {
 607                                         compatible = "syscon-poweroff";
 608                                         regmap = <&snvs>;
 609                                         offset = <0x38>;
 610                                         mask = <0x60>;
 611                                         status = "disabled";
 612                                 };
 613
 614                                 snvs_pwrkey: snvs-powerkey {
 615                                         compatible = "fsl,sec-v4.0-pwrkey";
 616                                         regmap = <&snvs>;
 617                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 618                                         linux,keycode = <KEY_POWER>;
 619                                         wakeup-source;
 620                                 };
 621                         };
 622
 623                         epit1: epit@020d0000 {
 624                                 reg = <0x020d0000 0x4000>;
 625                                 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 626                         };
 627
 628                         epit2: epit@020d4000 {
 629                                 reg = <0x020d4000 0x4000>;
 630                                 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 631                         };
 632
 633                         src: src@020d8000 {
 634                                 compatible = "fsl,imx6ul-src", "fsl,imx51-src";
 635                                 reg = <0x020d8000 0x4000>;
 636                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
 637                                              <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 638                                 #reset-cells = <1>;
 639                         };
 640
 641                         gpc: gpc@020dc000 {
 642                                 compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
 643                                 reg = <0x020dc000 0x4000>;
 644                                 interrupt-controller;
 645                                 #interrupt-cells = <3>;
 646                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 647                                 interrupt-parent = <&intc>;
 648                         };
 649
 650                         iomuxc: iomuxc@020e0000 {
 651                                 compatible = "fsl,imx6ul-iomuxc";
 652                                 reg = <0x020e0000 0x4000>;
 653                         };
 654
 655                         gpr: iomuxc-gpr@020e4000 {
 656                                 compatible = "fsl,imx6ul-iomuxc-gpr",
 657                                              "fsl,imx6q-iomuxc-gpr", "syscon";
 658                                 reg = <0x020e4000 0x4000>;
 659                         };
 660
 661                         gpt2: gpt@020e8000 {
 662                                 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 663                                 reg = <0x020e8000 0x4000>;
 664                                 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 665                                 clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
 666                                          <&clks IMX6UL_CLK_GPT2_SERIAL>;
 667                                 clock-names = "ipg", "per";
 668                         };
 669
 670                         sdma: sdma@020ec000 {
 671                                 compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
 672                                              "fsl,imx35-sdma";
 673                                 reg = <0x020ec000 0x4000>;
 674                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 675                                 clocks = <&clks IMX6UL_CLK_SDMA>,
 676                                          <&clks IMX6UL_CLK_SDMA>;
 677                                 clock-names = "ipg", "ahb";
 678                                 #dma-cells = <3>;
 679                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 680                         };
 681
 682                         pwm5: pwm@020f0000 {
 683                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 684                                 reg = <0x020f0000 0x4000>;
 685                                 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 686                                 clocks = <&clks IMX6UL_CLK_PWM5>,
 687                                          <&clks IMX6UL_CLK_PWM5>;
 688                                 clock-names = "ipg", "per";
 689                                 #pwm-cells = <2>;
 690                                 status = "disabled";
 691                         };
 692
 693                         pwm6: pwm@020f4000 {
 694                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 695                                 reg = <0x020f4000 0x4000>;
 696                                 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 697                                 clocks = <&clks IMX6UL_CLK_PWM6>,
 698                                          <&clks IMX6UL_CLK_PWM6>;
 699                                 clock-names = "ipg", "per";
 700                                 #pwm-cells = <2>;
 701                                 status = "disabled";
 702                         };
 703
 704                         pwm7: pwm@020f8000 {
 705                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 706                                 reg = <0x020f8000 0x4000>;
 707                                 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 708                                 clocks = <&clks IMX6UL_CLK_PWM7>,
 709                                          <&clks IMX6UL_CLK_PWM7>;
 710                                 clock-names = "ipg", "per";
 711                                 #pwm-cells = <2>;
 712                                 status = "disabled";
 713                         };
 714
 715                         pwm8: pwm@020fc000 {
 716                                 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 717                                 reg = <0x020fc000 0x4000>;
 718                                 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 719                                 clocks = <&clks IMX6UL_CLK_PWM8>,
 720                                          <&clks IMX6UL_CLK_PWM8>;
 721                                 clock-names = "ipg", "per";
 722                                 #pwm-cells = <2>;
 723                                 status = "disabled";
 724                         };
 725                 };
 726
 727                 aips2: aips-bus@02100000 {
 728                         compatible = "fsl,aips-bus", "simple-bus";
 729                         #address-cells = <1>;
 730                         #size-cells = <1>;
 731                         reg = <0x02100000 0x100000>;
 732                         ranges;
 733
 734                         usbotg1: usb@02184000 {
 735                                 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
 736                                 reg = <0x02184000 0x200>;
 737                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 738                                 clocks = <&clks IMX6UL_CLK_USBOH3>;
 739                                 fsl,usbphy = <&usbphy1>;
 740                                 fsl,usbmisc = <&usbmisc 0>;
 741                                 fsl,anatop = <&anatop>;
 742                                 ahb-burst-config = <0x0>;
 743                                 tx-burst-size-dword = <0x10>;
 744                                 rx-burst-size-dword = <0x10>;
 745                                 status = "disabled";
 746                         };
 747
 748                         usbotg2: usb@02184200 {
 749                                 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
 750                                 reg = <0x02184200 0x200>;
 751                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 752                                 clocks = <&clks IMX6UL_CLK_USBOH3>;
 753                                 fsl,usbphy = <&usbphy2>;
 754                                 fsl,usbmisc = <&usbmisc 1>;
 755                                 ahb-burst-config = <0x0>;
 756                                 tx-burst-size-dword = <0x10>;
 757                                 rx-burst-size-dword = <0x10>;
 758                                 status = "disabled";
 759                         };
 760
 761                         usbmisc: usbmisc@02184800 {
 762                                 #index-cells = <1>;
 763                                 compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
 764                                 reg = <0x02184800 0x200>;
 765                         };
 766
 767                         fec1: ethernet@02188000 {
 768                                 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
 769                                 reg = <0x02188000 0x4000>;
 770                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 771                                              <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 772                                 clocks = <&clks IMX6UL_CLK_ENET>,
 773                                          <&clks IMX6UL_CLK_ENET_AHB>,
 774                                          <&clks IMX6UL_CLK_ENET_PTP>,
 775                                          <&clks IMX6UL_CLK_ENET_REF>,
 776                                          <&clks IMX6UL_CLK_ENET_REF>;
 777                                 clock-names = "ipg", "ahb", "ptp",
 778                                               "enet_clk_ref", "enet_out";
 779                                 fsl,num-tx-queues=<1>;
 780                                 fsl,num-rx-queues=<1>;
 781                                 status = "disabled";
 782                         };
 783
 784                         usdhc1: usdhc@02190000 {
 785                                 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 786                                 reg = <0x02190000 0x4000>;
 787                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 788                                 clocks = <&clks IMX6UL_CLK_USDHC1>,
 789                                          <&clks IMX6UL_CLK_USDHC1>,
 790                                          <&clks IMX6UL_CLK_USDHC1>;
 791                                 clock-names = "ipg", "ahb", "per";
 792                                 bus-width = <4>;
 793                                 status = "disabled";
 794                         };
 795
 796                         usdhc2: usdhc@02194000 {
 797                                 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 798                                 reg = <0x02194000 0x4000>;
 799                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 800                                 clocks = <&clks IMX6UL_CLK_USDHC2>,
 801                                          <&clks IMX6UL_CLK_USDHC2>,
 802                                          <&clks IMX6UL_CLK_USDHC2>;
 803                                 clock-names = "ipg", "ahb", "per";
 804                                 bus-width = <4>;
 805                                 status = "disabled";
 806                         };
 807
 808                         adc1: adc@02198000 {
 809                                 compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
 810                                 reg = <0x02198000 0x4000>;
 811                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 812                                 clocks = <&clks IMX6UL_CLK_ADC1>;
 813                                 num-channels = <2>;
 814                                 clock-names = "adc";
 815                                 fsl,adck-max-frequency = <30000000>, <40000000>,
 816                                                          <20000000>;
 817                                 status = "disabled";
 818                         };
 819
 820                         i2c1: i2c@021a0000 {
 821                                 #address-cells = <1>;
 822                                 #size-cells = <0>;
 823                                 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
 824                                 reg = <0x021a0000 0x4000>;
 825                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 826                                 clocks = <&clks IMX6UL_CLK_I2C1>;
 827                                 status = "disabled";
 828                         };
 829
 830                         i2c2: i2c@021a4000 {
 831                                 #address-cells = <1>;
 832                                 #size-cells = <0>;
 833                                 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
 834                                 reg = <0x021a4000 0x4000>;
 835                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 836                                 clocks = <&clks IMX6UL_CLK_I2C2>;
 837                                 status = "disabled";
 838                         };
 839
 840                         i2c3: i2c@021a8000 {
 841                                 #address-cells = <1>;
 842                                 #size-cells = <0>;
 843                                 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
 844                                 reg = <0x021a8000 0x4000>;
 845                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 846                                 clocks = <&clks IMX6UL_CLK_I2C3>;
 847                                 status = "disabled";
 848                         };
 849
 850                         mmdc: mmdc@021b0000 {
 851                                 compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
 852                                 reg = <0x021b0000 0x4000>;
 853                         };
 854
 855                         lcdif: lcdif@021c8000 {
 856                                 compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
 857                                 reg = <0x021c8000 0x4000>;
 858                                 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 859                                 clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
 860                                          <&clks IMX6UL_CLK_LCDIF_APB>,
 861                                          <&clks IMX6UL_CLK_DUMMY>;
 862                                 clock-names = "pix", "axi", "disp_axi";
 863                                 status = "disabled";
 864                         };
 865
 866                         qspi: qspi@021e0000 {
 867                                 #address-cells = <1>;
 868                                 #size-cells = <0>;
 869                                 compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
 870                                 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 871                                 reg-names = "QuadSPI", "QuadSPI-memory";
 872                                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 873                                 clocks = <&clks IMX6UL_CLK_QSPI>,
 874                                          <&clks IMX6UL_CLK_QSPI>;
 875                                 clock-names = "qspi_en", "qspi";
 876                                 status = "disabled";
 877                         };
 878
 879                         wdog3: wdog@021e4000 {
 880                                 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 881                                 reg = <0x021e4000 0x4000>;
 882                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 883                                 clocks = <&clks IMX6UL_CLK_WDOG3>;
 884                                 status = "disabled";
 885                         };
 886
 887                         uart2: serial@021e8000 {
 888                                 compatible = "fsl,imx6ul-uart",
 889                                              "fsl,imx6q-uart";
 890                                 reg = <0x021e8000 0x4000>;
 891                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 892                                 clocks = <&clks IMX6UL_CLK_UART2_IPG>,
 893                                          <&clks IMX6UL_CLK_UART2_SERIAL>;
 894                                 clock-names = "ipg", "per";
 895                                 status = "disabled";
 896                         };
 897
 898                         uart3: serial@021ec000 {
 899                                 compatible = "fsl,imx6ul-uart",
 900                                              "fsl,imx6q-uart";
 901                                 reg = <0x021ec000 0x4000>;
 902                                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 903                                 clocks = <&clks IMX6UL_CLK_UART3_IPG>,
 904                                          <&clks IMX6UL_CLK_UART3_SERIAL>;
 905                                 clock-names = "ipg", "per";
 906                                 status = "disabled";
 907                         };
 908
 909                         uart4: serial@021f0000 {
 910                                 compatible = "fsl,imx6ul-uart",
 911                                              "fsl,imx6q-uart";
 912                                 reg = <0x021f0000 0x4000>;
 913                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 914                                 clocks = <&clks IMX6UL_CLK_UART4_IPG>,
 915                                          <&clks IMX6UL_CLK_UART4_SERIAL>;
 916                                 clock-names = "ipg", "per";
 917                                 status = "disabled";
 918                         };
 919
 920                         uart5: serial@021f4000 {
 921                                 compatible = "fsl,imx6ul-uart",
 922                                              "fsl,imx6q-uart";
 923                                 reg = <0x021f4000 0x4000>;
 924                                 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 925                                 clocks = <&clks IMX6UL_CLK_UART5_IPG>,
 926                                          <&clks IMX6UL_CLK_UART5_SERIAL>;
 927                                 clock-names = "ipg", "per";
 928                                 status = "disabled";
 929                         };
 930
 931                         i2c4: i2c@021f8000 {
 932                                 #address-cells = <1>;
 933                                 #size-cells = <0>;
 934                                 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
 935                                 reg = <0x021f8000 0x4000>;
 936                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 937                                 clocks = <&clks IMX6UL_CLK_I2C4>;
 938                                 status = "disabled";
 939                         };
 940
 941                         uart6: serial@021fc000 {
 942                                 compatible = "fsl,imx6ul-uart",
 943                                              "fsl,imx6q-uart";
 944                                 reg = <0x021fc000 0x4000>;
 945                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 946                                 clocks = <&clks IMX6UL_CLK_UART6_IPG>,
 947                                          <&clks IMX6UL_CLK_UART6_SERIAL>;
 948                                 clock-names = "ipg", "per";
 949                                 status = "disabled";
 950                         };
 951                 };
 952         };
 953 };