ARM: dts: rmobile: Add soc label to Gen3
[oweals/u-boot.git] / arch / arm / dts / imx6ul-geam.dts
1 /*
2  * Copyright (C) 2016 Amarula Solutions B.V.
3  * Copyright (C) 2016 Engicam S.r.l.
4  *
5  * This file is dual-licensed: you can use it either under the terms
6  * of the GPL or the X11 license, at your option. Note that this dual
7  * licensing only applies to this file, and not this project as a
8  * whole.
9  *
10  *  a) This file is free software; you can redistribute it and/or
11  *     modify it under the terms of the GNU General Public License
12  *     version 2 as published by the Free Software Foundation.
13  *
14  *     This file is distributed in the hope that it will be useful
15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *     GNU General Public License for more details.
18  *
19  * Or, alternatively
20  *
21  *  b) Permission is hereby granted, free of charge, to any person
22  *     obtaining a copy of this software and associated documentation
23  *     files (the "Software"), to deal in the Software without
24  *     restriction, including without limitation the rights to use
25  *     copy, modify, merge, publish, distribute, sublicense, and/or
26  *     sell copies of the Software, and to permit persons to whom the
27  *     Software is furnished to do so, subject to the following
28  *     conditions:
29  *
30  *     The above copyright notice and this permission notice shall be
31  *     included in all copies or substantial portions of the Software.
32  *
33  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40  *     OTHER DEALINGS IN THE SOFTWARE.
41  */
42
43 /dts-v1/;
44
45 #include <dt-bindings/gpio/gpio.h>
46 #include <dt-bindings/input/input.h>
47 #include "imx6ul.dtsi"
48
49 / {
50         model = "Engicam GEAM6UL";
51         compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
52
53         memory {
54                 reg = <0x80000000 0x08000000>;
55         };
56
57         chosen {
58                 stdout-path = &uart1;
59         };
60 };
61
62 &fec1 {
63         pinctrl-names = "default";
64         pinctrl-0 = <&pinctrl_enet1>;
65         phy-mode = "rmii";
66         status = "okay";
67 };
68
69 &i2c1 {
70         clock-frequency = <100000>;
71         pinctrl-names = "default";
72         pinctrl-0 = <&pinctrl_i2c1>;
73         status = "okay";
74 };
75
76 &i2c2 {
77         clock_frequency = <100000>;
78         pinctrl-names = "default";
79         pinctrl-0 = <&pinctrl_i2c2>;
80         status = "okay";
81 };
82
83 &uart1 {
84         pinctrl-names = "default";
85         pinctrl-0 = <&pinctrl_uart1>;
86         status = "okay";
87 };
88
89 &usdhc1 {
90         pinctrl-names = "default", "state_100mhz", "state_200mhz";
91         pinctrl-0 = <&pinctrl_usdhc1>;
92         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
93         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
94         bus-width = <4>;
95         cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
96         no-1-8-v;
97         status = "okay";
98 };
99
100 &iomuxc {
101         pinctrl_enet1: enet1grp {
102                 fsl,pins = <
103                         MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
104                         MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
105                         MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
106                         MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
107                         MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
108                         MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
109                         MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
110                         MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
111                         MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b031
112                 >;
113         };
114
115         pinctrl_i2c1: i2c1grp {
116                 fsl,pins = <
117                         MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
118                         MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
119                 >;
120         };
121
122         pinctrl_i2c2: i2c2grp {
123                         fsl,pins = <
124                         MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
125                         MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
126                 >;
127         };
128
129         pinctrl_uart1: uart1grp {
130                 fsl,pins = <
131                         MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
132                         MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
133                 >;
134         };
135
136         pinctrl_usdhc1: usdhc1grp {
137                 fsl,pins = <
138                         MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
139                         MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
140                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
141                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
142                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
143                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
144                 >;
145         };
146
147         pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
148                 fsl,pins = <
149                         MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
150                         MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
151                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
152                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
153                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
154                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
155                 >;
156         };
157
158         pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
159                 fsl,pins = <
160                         MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
161                         MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
162                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
163                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
164                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
165                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
166                 >;
167         };
168 };