arch/arm/dts/imx6sll.dtsi

   1 /*
   2  * Copyright 2016 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 #include <dt-bindings/clock/imx6sll-clock.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/interrupt-controller/arm-gic.h>
  12 #include "imx6sll-pinfunc.h"
  13 #include "skeleton.dtsi"
  14
  15 / {
  16         aliases {
  17                 gpio0 = &gpio1;
  18                 gpio1 = &gpio2;
  19                 gpio2 = &gpio3;
  20                 gpio3 = &gpio4;
  21                 gpio4 = &gpio5;
  22                 gpio5 = &gpio6;
  23                 i2c0 = &i2c1;
  24                 i2c1 = &i2c2;
  25                 i2c2 = &i2c3;
  26                 mmc0 = &usdhc1;
  27                 mmc1 = &usdhc2;
  28                 mmc2 = &usdhc3;
  29                 serial0 = &uart1;
  30                 serial1 = &uart2;
  31                 serial2 = &uart3;
  32                 serial3 = &uart4;
  33                 serial4 = &uart5;
  34                 spi0 = &ecspi1;
  35                 spi1 = &ecspi2;
  36                 spi3 = &ecspi3;
  37                 spi4 = &ecspi4;
  38                 usbphy0 = &usbphy1;
  39                 usbphy1 = &usbphy2;
  40         };
  41
  42         cpus {
  43                 #address-cells = <1>;
  44                 #size-cells = <0>;
  45
  46                 cpu0: cpu@0 {
  47                         compatible = "arm,cortex-a9";
  48                         device_type = "cpu";
  49                         reg = <0>;
  50                         next-level-cache = <&L2>;
  51                         operating-points = <
  52                                 /* kHz    uV */
  53                                 996000  1225000
  54                                 792000  1175000
  55                                 396000  1075000
  56                                 198000  975000
  57                         >;
  58                         fsl,soc-operating-points = <
  59                                 /* ARM kHz      SOC-PU uV */
  60                                 996000          1225000
  61                                 792000          1175000
  62                                 396000          1175000
  63                                 198000          1175000
  64                         >;
  65                         clock-latency = <61036>; /* two CLK32 periods */
  66                         fsl,low-power-run;
  67                         clocks = <&clks IMX6SLL_CLK_ARM>,
  68                                  <&clks IMX6SLL_CLK_PLL2_PFD2>,
  69                                  <&clks IMX6SLL_CLK_STEP>,
  70                                  <&clks IMX6SLL_CLK_PLL1_SW>,
  71                                  <&clks IMX6SLL_CLK_PLL1_SYS>,
  72                                  <&clks IMX6SLL_CLK_PLL1>,
  73                                  <&clks IMX6SLL_PLL1_BYPASS>,
  74                                  <&clks IMX6SLL_PLL1_BYPASS_SRC>;
  75                         clock-names = "arm", "pll2_pfd2_396m", "step",
  76                                       "pll1_sw", "pll1_sys", "pll1", "pll1_bypass",
  77                                       "pll1_bypass_src";
  78                 };
  79         };
  80
  81         intc: interrupt-controller@00a01000 {
  82                 compatible = "arm,cortex-a9-gic";
  83                 #interrupt-cells = <3>;
  84                 interrupt-controller;
  85                 reg = <0x00a01000 0x1000>,
  86                       <0x00a00100 0x100>;
  87                 interrupt-parent = <&intc>;
  88         };
  89
  90         clocks {
  91                 #address-cells = <1>;
  92                 #size-cells = <0>;
  93
  94                 ckil: clock@0 {
  95                         compatible = "fixed-clock";
  96                         reg = <0>;
  97                         #clock-cells = <0>;
  98                         clock-frequency = <32768>;
  99                         clock-output-names = "ckil";
 100                 };
 101
 102                 osc: clock@1 {
 103                         compatible = "fixed-clock";
 104                         reg = <1>;
 105                         #clock-cells = <0>;
 106                         clock-frequency = <24000000>;
 107                         clock-output-names = "osc";
 108                 };
 109
 110                 ipp_di0: clock@2 {
 111                         compatible = "fixed-clock";
 112                         reg = <2>;
 113                         #clock-cells = <0>;
 114                         clock-frequency = <0>;
 115                         clock-output-names = "ipp_di0";
 116                 };
 117
 118                 ipp_di1: clock@3 {
 119                         compatible = "fixed-clock";
 120                         reg = <3>;
 121                         #clock-cells = <0>;
 122                         clock-frequency = <0>;
 123                         clock-output-names = "ipp_di1";
 124                 };
 125         };
 126
 127         soc {
 128                 #address-cells = <1>;
 129                 #size-cells = <1>;
 130                 compatible = "simple-bus";
 131                 interrupt-parent = <&gpc>;
 132                 ranges;
 133
 134                 busfreq {
 135                         compatible = "fsl,imx_busfreq";
 136                         clocks = <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_PLL2_198M>,
 137                                  <&clks IMX6SLL_CLK_PLL2_BUS>, <&clks IMX6SLL_CLK_ARM>,
 138                                  <&clks IMX6SLL_CLK_PLL3_USB_OTG>, <&clks IMX6SLL_CLK_PERIPH>,
 139                                  <&clks IMX6SLL_CLK_PERIPH_PRE>, <&clks IMX6SLL_CLK_PERIPH_CLK2>,
 140                                  <&clks IMX6SLL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6SLL_CLK_OSC>,
 141                                  <&clks IMX6SLL_CLK_AHB>, <&clks IMX6SLL_CLK_AXI_PODF>,
 142                                  <&clks IMX6SLL_CLK_PERIPH2>, <&clks IMX6SLL_CLK_PERIPH2_PRE>,
 143                                  <&clks IMX6SLL_CLK_PERIPH2_CLK2>, <&clks IMX6SLL_CLK_PERIPH2_CLK2_SEL>,
 144                                  <&clks IMX6SLL_CLK_STEP>, <&clks IMX6SLL_CLK_MMDC_P0_FAST>, <&clks IMX6SLL_PLL1_BYPASS_SRC>,
 145                                  <&clks IMX6SLL_PLL1_BYPASS>, <&clks IMX6SLL_CLK_PLL1_SYS>, <&clks IMX6SLL_CLK_PLL1_SW>,
 146                                  <&clks IMX6SLL_CLK_PLL1>;
 147                         clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
 148                                       "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
 149                                       "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
 150                                       "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
 151                         fsl,max_ddr_freq = <400000000>;
 152                 };
 153
 154                 ocrams: sram@00900000 {
 155                         compatible = "fsl,lpm-sram";
 156                         reg = <0x00900000 0x4000>;
 157                 };
 158
 159                 ocrams_ddr: sram@00904000 {
 160                         compatible = "fsl,ddr-lpm-sram";
 161                         reg = <0x00904000 0x1000>;
 162                 };
 163
 164                 ocram: sram@00905000 {
 165                         compatible = "mmio-sram";
 166                         reg = <0x00905000 0x1B000>;
 167                 };
 168
 169                 L2: l2-cache@00a02000 {
 170                         compatible = "arm,pl310-cache";
 171                         reg = <0x00a02000 0x1000>;
 172                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 173                         cache-unified;
 174                         cache-level = <2>;
 175                         arm,tag-latency = <4 2 3>;
 176                         arm,data-latency = <4 2 3>;
 177                 };
 178
 179                 aips1: aips-bus@02000000 {
 180                         compatible = "fsl,aips-bus", "simple-bus";
 181                         #address-cells = <1>;
 182                         #size-cells = <1>;
 183                         reg = <0x02000000 0x100000>;
 184                         ranges;
 185
 186                         spba: spba-bus@02000000 {
 187                                 compatible = "fsl,spba-bus", "simple-bus";
 188                                 #address-cells = <1>;
 189                                 #size-cells = <1>;
 190                                 reg = <0x02000000 0x40000>;
 191                                 ranges;
 192
 193                                 spdif: spdif@02004000 {
 194                                         compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
 195                                         reg = <0x02004000 0x4000>;
 196                                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 197                                         dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
 198                                         dma-names = "rx", "tx";
 199                                         clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
 200                                                  <&clks IMX6SLL_CLK_OSC>,
 201                                                  <&clks IMX6SLL_CLK_SPDIF>,
 202                                                  <&clks IMX6SLL_CLK_DUMMY>,
 203                                                  <&clks IMX6SLL_CLK_DUMMY>,
 204                                                  <&clks IMX6SLL_CLK_DUMMY>,
 205                                                  <&clks IMX6SLL_CLK_IPG>,
 206                                                  <&clks IMX6SLL_CLK_DUMMY>,
 207                                                  <&clks IMX6SLL_CLK_DUMMY>,
 208                                                  <&clks IMX6SLL_CLK_SPBA>;
 209                                         clock-names = "core", "rxtx0",
 210                                                       "rxtx1", "rxtx2",
 211                                                       "rxtx3", "rxtx4",
 212                                                       "rxtx5", "rxtx6",
 213                                                       "rxtx7", "dma";
 214                                         status = "disabled";
 215                                 };
 216
 217                                 ecspi1: ecspi@02008000 {
 218                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 219                                         reg = <0x02008000 0x4000>;
 220                                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 221                                         dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 222                                         dma-names = "rx", "tx";
 223                                         clocks = <&clks IMX6SLL_CLK_ECSPI1>,
 224                                                  <&clks IMX6SLL_CLK_ECSPI1>;
 225                                         clock-names = "ipg", "per";
 226                                         status = "disabled";
 227                                 };
 228
 229                                 ecspi2: ecspi@0200c000 {
 230                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 231                                         reg = <0x0200c000 0x4000>;
 232                                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 233                                         dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 234                                         dma-names = "rx", "tx";
 235                                         clocks = <&clks IMX6SLL_CLK_ECSPI2>,
 236                                                  <&clks IMX6SLL_CLK_ECSPI2>;
 237                                         clock-names = "ipg", "per";
 238                                         status = "disabled";
 239                                 };
 240
 241                                 ecspi3: ecspi@02010000 {
 242                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 243                                         reg = <0x02010000 0x4000>;
 244                                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 245                                         dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 246                                         dma-names = "rx", "tx";
 247                                         clocks = <&clks IMX6SLL_CLK_ECSPI3>,
 248                                                  <&clks IMX6SLL_CLK_ECSPI3>;
 249                                         clock-names = "ipg", "per";
 250                                         status = "disabled";
 251                                 };
 252
 253                                 ecspi4: ecspi@02014000 {
 254                                         compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
 255                                         reg = <0x02014000 0x4000>;
 256                                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 257                                         dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 258                                         dma-names = "rx", "tx";
 259                                         clocks = <&clks IMX6SLL_CLK_ECSPI4>,
 260                                                  <&clks IMX6SLL_CLK_ECSPI4>;
 261                                         clock-names = "ipg", "per";
 262                                         status = "disabled";
 263                                 };
 264
 265                                 uart4: serial@02018000 {
 266                                         compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
 267                                         reg = <0x02018000 0x4000>;
 268                                         interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 269                                         dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
 270                                         dma-names = "rx", "tx";
 271                                         clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
 272                                                  <&clks IMX6SLL_CLK_UART4_SERIAL>;
 273                                         clock-names = "ipg", "per";
 274                                         status = "disabled";
 275                                 };
 276
 277                                 uart1: serial@02020000 {
 278                                         compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
 279                                         reg = <0x02020000 0x4000>;
 280                                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 281                                         dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 282                                         dma-names = "rx", "tx";
 283                                         clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
 284                                                  <&clks IMX6SLL_CLK_UART1_SERIAL>;
 285                                         clock-names = "ipg", "per";
 286                                         status = "disabled";
 287                                 };
 288
 289                                 uart2: serial@02024000 {
 290                                         compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
 291                                         reg = <0x02024000 0x4000>;
 292                                         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 293                                         dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
 294                                         dma-names = "rx", "tx";
 295                                         clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
 296                                                  <&clks IMX6SLL_CLK_UART2_SERIAL>;
 297                                         clock-names = "ipg", "per";
 298                                         status = "disabled";
 299                                 };
 300
 301                                 ssi1: ssi@02028000 {
 302                                         compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
 303                                         reg = <0x02028000 0x4000>;
 304                                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 305                                         dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
 306                                         dma-names = "rx", "tx";
 307                                         fsl,fifo-depth = <15>;
 308                                         clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
 309                                                  <&clks IMX6SLL_CLK_SSI1>;
 310                                         clock-names = "ipg", "baud";
 311                                         status = "disabled";
 312                                 };
 313
 314                                 ssi2: ssi2@0202c000 {
 315                                         compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
 316                                         reg = <0x0202c000 0x4000>;
 317                                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 318                                         dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
 319                                         dma-names = "rx", "tx";
 320                                         fsl,fifo-depth = <15>;
 321                                         clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
 322                                                  <&clks IMX6SLL_CLK_SSI2>;
 323                                         clock-names = "ipg", "baud";
 324                                         status = "disabled";
 325                                 };
 326
 327                                 ssi3: ssi@02030000 {
 328                                         compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
 329                                         reg = <0x02030000 0x4000>;
 330                                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 331                                         dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
 332                                         dma-names = "rx", "tx";
 333                                         fsl,fifo-depth = <15>;
 334                                         clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
 335                                                  <&clks IMX6SLL_CLK_SSI3>;
 336                                         clock-names = "ipg", "baud";
 337                                         status = "disabled";
 338                                 };
 339
 340                                 uart3: serial@02034000 {
 341                                         compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
 342                                         reg = <0x02034000 0x4000>;
 343                                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 344                                         dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
 345                                         dma-name = "rx", "tx";
 346                                         clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
 347                                                  <&clks IMX6SLL_CLK_UART3_SERIAL>;
 348                                         clock-names = "ipg", "per";
 349                                         status = "disabled";
 350                                 };
 351                         };
 352
 353                         pwm1: pwm@02080000 {
 354                                 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
 355                                 reg = <0x02080000 0x4000>;
 356                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 357                                 clocks = <&clks IMX6SLL_CLK_PWM1>,
 358                                          <&clks IMX6SLL_CLK_PWM1>;
 359                                 clock-names = "ipg", "per";
 360                                 #pwm-cells = <2>;
 361                         };
 362
 363                         pwm2: pwm@02084000 {
 364                                 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
 365                                 reg = <0x02084000 0x4000>;
 366                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 367                                 clocks = <&clks IMX6SLL_CLK_PWM2>,
 368                                          <&clks IMX6SLL_CLK_PWM2>;
 369                                 clock-names = "ipg", "per";
 370                                 #pwm-cells = <2>;
 371                         };
 372
 373                         pwm3: pwm@02088000 {
 374                                 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
 375                                 reg = <0x02088000 0x4000>;
 376                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 377                                 clocks = <&clks IMX6SLL_CLK_PWM3>,
 378                                          <&clks IMX6SLL_CLK_PWM3>;
 379                                 clock-names = "ipg", "per";
 380                                 #pwm-cells = <2>;
 381                         };
 382
 383                         pwm4: pwm@0208c000 {
 384                                 compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
 385                                 reg = <0x0208c000 0x4000>;
 386                                 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 387                                 clocks = <&clks IMX6SLL_CLK_PWM4>,
 388                                          <&clks IMX6SLL_CLK_PWM4>;
 389                                 clock-names = "ipg", "per";
 390                                 #pwm-cells = <2>;
 391                         };
 392
 393                         gpt1: gpt@02098000 {
 394                                 compatible = "fsl,imx6sll-gpt";
 395                                 reg = <0x02098000 0x4000>;
 396                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 397                                 clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
 398                                          <&clks IMX6SLL_CLK_GPT_SERIAL>;
 399                                 clock-names = "ipg", "per";
 400                         };
 401
 402                         gpio1: gpio@0209c000 {
 403                                 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
 404                                 reg = <0x0209c000 0x4000>;
 405                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 406                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 407                                 gpio-controller;
 408                                 #gpio-cells = <2>;
 409                                 interrupt-controller;
 410                                 #interrupt-cells = <2>;
 411                         };
 412
 413                         gpio2: gpio@020a0000 {
 414                                 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
 415                                 reg = <0x020a0000 0x4000>;
 416                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 417                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 418                                 gpio-controller;
 419                                 #gpio-cells = <2>;
 420                                 interrupt-controller;
 421                                 #interrupt-cells = <2>;
 422                         };
 423
 424                         gpio3: gpio@020a4000 {
 425                                 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
 426                                 reg = <0x020a4000 0x4000>;
 427                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 428                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 429                                 gpio-controller;
 430                                 #gpio-cells = <2>;
 431                                 interrupt-controller;
 432                                 #interrupt-cells = <2>;
 433                         };
 434
 435                         gpio4: gpio@020a8000 {
 436                                 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
 437                                 reg = <0x020a8000 0x4000>;
 438                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 439                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 440                                 gpio-controller;
 441                                 #gpio-cells = <2>;
 442                                 interrupt-controller;
 443                                 #interrupt-cells = <2>;
 444                         };
 445
 446                         gpio5: gpio@020ac000 {
 447                                 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
 448                                 reg = <0x020ac000 0x4000>;
 449                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 450                                              <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 451                                 gpio-controller;
 452                                 #gpio-cells = <2>;
 453                                 interrupt-controller;
 454                                 #interrupt-cells = <2>;
 455                         };
 456
 457                         gpio6: gpio@020b0000 {
 458                                 compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
 459                                 reg = <0x020b0000 0x4000>;
 460                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 461                                              <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 462                                 gpio-controller;
 463                                 #gpio-cells = <2>;
 464                                 interrupt-controller;
 465                                 #interrupt-cells = <2>;
 466                         };
 467
 468                         kpp: kpp@020b8000 {
 469                                 compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
 470                                 reg = <0x020b8000 0x4000>;
 471                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 472                                 clocks = <&clks IMX6SLL_CLK_KPP>;
 473                                 status = "disabled";
 474                         };
 475
 476                         wdog1: wdog@020bc000 {
 477                                 compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
 478                                 reg = <0x020bc000 0x4000>;
 479                                 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 480                                 clocks = <&clks IMX6SLL_CLK_WDOG1>;
 481                         };
 482
 483                         wdog2: wdog@020c0000 {
 484                                 compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
 485                                 reg = <0x020c0000 0x4000>;
 486                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 487                                 clocks = <&clks IMX6SLL_CLK_WDOG2>;
 488                                 status = "disabled";
 489                         };
 490
 491                         clks: ccm@020c4000 {
 492                                 compatible = "fsl,imx6sll-ccm";
 493                                 reg = <0x020c4000 0x4000>;
 494                                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
 495                                              <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 496                                 #clock-cells = <1>;
 497                                 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
 498                                 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
 499                         };
 500
 501                         anatop: anatop@020c8000 {
 502                                 compatible = "fsl,imx6sll-anatop",
 503                                              "fsl,imx6q-anatop",
 504                                              "syscon", "simple-bus";
 505                                 reg = <0x020c8000 0x4000>;
 506                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 507                                              <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 508                                              <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 509
 510                                 reg_3p0: regulator-3p0@120 {
 511                                         compatible = "fsl,anatop-regulator";
 512                                         regulator-name = "vdd3p0";
 513                                         regulator-min-microvolt = <2625000>;
 514                                         regulator-max-microvolt = <3400000>;
 515                                         anatop-reg-offset = <0x120>;
 516                                         anatop-vol-bit-shift = <8>;
 517                                         anatop-vol-bit-width = <5>;
 518                                         anatop-min-bit-val = <0>;
 519                                         anatop-min-voltage = <2625000>;
 520                                         anatop-max-voltage = <3400000>;
 521                                         anatop-enable-bit = <0>;
 522                                 };
 523                         };
 524
 525                         tempmon: tempmon {
 526                                 compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
 527                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 528                                 fsl,tempmon = <&anatop>;
 529                                 fsl,tempmon-data = <&ocotp>;
 530                                 clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
 531                                 status = "disabled";
 532                         };
 533
 534                         usbphy1: usbphy@020c9000 {
 535                                 compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
 536                                                 "fsl,imx23-usbphy";
 537                                 reg = <0x020c9000 0x1000>;
 538                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 539                                 clocks = <&clks IMX6SLL_CLK_USBPHY1>;
 540                                 phy-3p0-supply = <&reg_3p0>;
 541                                 fsl,anatop = <&anatop>;
 542                         };
 543
 544                         usbphy2: usbphy@020ca000 {
 545                                 compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
 546                                                 "fsl,imx23-usbphy";
 547                                 reg = <0x020ca000 0x1000>;
 548                                 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 549                                 clocks = <&clks IMX6SLL_CLK_USBPHY2>;
 550                                 phy-reg_3p0-supply = <&reg_3p0>;
 551                                 fsl,anatop = <&anatop>;
 552                         };
 553
 554                         snvs: snvs@020cc000 {
 555                                 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
 556                                 reg = <0x020cc000 0x4000>;
 557
 558                                 snvs_rtc: snvs-rtc-lp {
 559                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 560                                         regmap = <&snvs>;
 561                                         offset = <0x34>;
 562                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 563                                 };
 564
 565                                 snvs_poweroff: snvs-poweroff {
 566                                         compatible = "syscon-poweroff";
 567                                         regmap = <&snvs>;
 568                                         offset = <0x38>;
 569                                         mask = <0x61>;
 570                                 };
 571
 572                                 snvs_pwrkey: snvs-powerkey {
 573                                         compatible = "fsl,sec-v4.0-pwrkey";
 574                                         regmap = <&snvs>;
 575                                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 576                                         linux,keycode = <KEY_POWER>;
 577                                         wakeup;
 578                                 };
 579                         };
 580
 581                         epit1: epit@020d0000 {
 582                                 reg = <0x020d0000 0x4000>;
 583                                 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 584                         };
 585
 586                         epit2: epit@020d4000 {
 587                                 reg = <0x020d4000 0x4000>;
 588                                 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 589                         };
 590
 591                         src: src@020d8000 {
 592                                 compatible = "fsl,imx6sll-src", "fsl,imx51-src";
 593                                 reg = <0x020d8000 0x4000>;
 594                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
 595                                              <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 596                                 #reset-cells = <1>;
 597                         };
 598
 599                         gpc: gpc@020dc000 {
 600                                 compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
 601                                 reg = <0x020dc000 0x4000>;
 602                                 interrupt-controller;
 603                                 #interrupt-cells = <3>;
 604                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 605                                 interrupt-parent = <&intc>;
 606                                 fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
 607                         };
 608
 609                         iomuxc: iomuxc@020e0000 {
 610                                 compatible = "fsl,imx6sll-iomuxc";
 611                                 reg = <0x020e0000 0x4000>;
 612                         };
 613
 614                         gpr: iomuxc-gpr@020e4000 {
 615                                 compatible = "fsl,imx6sll-iomuxc-gpr",
 616                                              "fsl,imx6q-iomuxc-gpr", "syscon";
 617                                 reg = <0x020e4000 0x4000>;
 618                         };
 619
 620                         csi: csi@020e8000 {
 621                                 compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
 622                                 reg = <0x020e8000 0x4000>;
 623                                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 624                                 clocks = <&clks IMX6SLL_CLK_DUMMY>,
 625                                          <&clks IMX6SLL_CLK_CSI>,
 626                                          <&clks IMX6SLL_CLK_DUMMY>;
 627                                 clock-names = "disp-axi", "csi_mclk", "disp_dcic";
 628                                 status = "disabled";
 629                         };
 630
 631                         sdma: sdma@020ec000 {
 632                                 compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
 633                                 reg = <0x020ec000 0x4000>;
 634                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 635                                 clocks = <&clks IMX6SLL_CLK_SDMA>,
 636                                          <&clks IMX6SLL_CLK_SDMA>;
 637                                 clock-names = "ipg", "ahb";
 638                                 #dma-cells = <3>;
 639                                 iram = <&ocram>;
 640                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 641                         };
 642
 643                         pxp: pxp@020f0000 {
 644                                 compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
 645                                 reg = <0x020f0000 0x4000>;
 646                                 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
 647                                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 648                                 clocks = <&clks IMX6SLL_CLK_DUMMY>,
 649                                          <&clks IMX6SLL_CLK_PXP>;
 650                                 clock-names = "pxp_ipg", "pxp_axi";
 651                                 status = "disabled";
 652                         };
 653
 654                         epdc: epdc@020f4000 {
 655                                 compatible = "fsl,imx6sll-epdc", "fsl,imx7d-epdc";
 656                                 reg = <0x020f4000 0x4000>;
 657                                 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 658                                 clocks = <&clks IMX6SLL_CLK_EPDC_AXI>, <&clks IMX6SLL_CLK_EPDC_PIX>;
 659                                 clock-names = "epdc_axi", "epdc_pix";
 660                                 status = "disabled";
 661                         };
 662
 663                         lcdif: lcdif@020f8000 {
 664                                 compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
 665                                 reg = <0x020f8000 0x4000>;
 666                                 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 667                                 clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
 668                                          <&clks IMX6SLL_CLK_LCDIF_APB>,
 669                                          <&clks IMX6SLL_CLK_DUMMY>;
 670                                 clock-names = "pix", "axi", "disp_axi";
 671                                 status = "disabled";
 672                         };
 673
 674                         dcp: dcp@020fc000 {
 675                                 compatible = "fsl,imx6sl-dcp";
 676                                 reg = <0x020fc000 0x4000>;
 677                                 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
 678                                              <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
 679                                              <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 680                                 clocks = <&clks IMX6SLL_CLK_DCP>;
 681                                 clock-names = "dcp";
 682                         };
 683                 };
 684
 685                 aips2: aips-bus@02100000 {
 686                         compatible = "fsl,aips-bus", "simple-bus";
 687                         #address-cells = <1>;
 688                         #size-cells = <1>;
 689                         reg = <0x02100000 0x100000>;
 690                         ranges;
 691
 692                         usbotg1: usb@02184000 {
 693                                 compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
 694                                                 "fsl,imx27-usb";
 695                                 reg = <0x02184000 0x200>;
 696                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 697                                 clocks = <&clks IMX6SLL_CLK_USBOH3>;
 698                                 fsl,usbphy = <&usbphy1>;
 699                                 fsl,usbmisc = <&usbmisc 0>;
 700                                 fsl,anatop = <&anatop>;
 701                                 ahb-burst-config = <0x0>;
 702                                 tx-burst-size-dword = <0x10>;
 703                                 rx-burst-size-dword = <0x10>;
 704                                 status = "disabled";
 705                         };
 706
 707                         usbotg2: usb@02184200 {
 708                                 compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
 709                                                 "fsl,imx27-usb";
 710                                 reg = <0x02184200 0x200>;
 711                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 712                                 clocks = <&clks IMX6SLL_CLK_USBOH3>;
 713                                 fsl,usbphy = <&usbphy2>;
 714                                 fsl,usbmisc = <&usbmisc 1>;
 715                                 ahb-burst-config = <0x0>;
 716                                 tx-burst-size-dword = <0x10>;
 717                                 rx-burst-size-dword = <0x10>;
 718                                 status = "disabled";
 719                         };
 720
 721                         usbmisc: usbmisc@02184800 {
 722                                 #index-cells = <1>;
 723                                 compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
 724                                                 "fsl,imx6q-usbmisc";
 725                                 reg = <0x02184800 0x200>;
 726                         };
 727
 728                         usdhc1: usdhc@02190000 {
 729                                 compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
 730                                 reg = <0x02190000 0x4000>;
 731                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 732                                 clocks = <&clks IMX6SLL_CLK_USDHC1>,
 733                                          <&clks IMX6SLL_CLK_USDHC1>,
 734                                          <&clks IMX6SLL_CLK_USDHC1>;
 735                                 clock-names = "ipg", "ahb", "per";
 736                                 bus-width = <4>;
 737                                 fsl,tuning-step = <2>;
 738                                 fsl,tuning-start-tap = <20>;
 739                                 status = "disabled";
 740                         };
 741
 742                         usdhc2: usdhc@02194000 {
 743                                 compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
 744                                 reg = <0x02194000 0x4000>;
 745                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 746                                 clocks = <&clks IMX6SLL_CLK_USDHC2>,
 747                                          <&clks IMX6SLL_CLK_USDHC2>,
 748                                          <&clks IMX6SLL_CLK_USDHC2>;
 749                                 clock-names = "ipg", "ahb", "per";
 750                                 bus-width = <4>;
 751                                 fsl,tuning-step = <2>;
 752                                 fsl,tuning-start-tap = <20>;
 753                                 status = "disabled";
 754                         };
 755
 756                         usdhc3: usdhc@02198000 {
 757                                 compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
 758                                 reg = <0x02198000 0x4000>;
 759                                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 760                                 clocks = <&clks IMX6SLL_CLK_USDHC3>,
 761                                          <&clks IMX6SLL_CLK_USDHC3>,
 762                                          <&clks IMX6SLL_CLK_USDHC3>;
 763                                 clock-names = "ipg", "ahb", "per";
 764                                 bus-width = <4>;
 765                                 fsl,tuning-step = <2>;
 766                                 fsl,tuning-start-tap = <20>;
 767                                 status = "disabled";
 768                         };
 769
 770                         i2c1: i2c@021a0000 {
 771                                 #address-cells = <1>;
 772                                 #size-cells = <0>;
 773                                 compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
 774                                 reg = <0x021a0000 0x4000>;
 775                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 776                                 clocks = <&clks IMX6SLL_CLK_I2C1>;
 777                                 status = "disabled";
 778                         };
 779
 780                         i2c2: i2c@021a4000 {
 781                                 #address-cells = <1>;
 782                                 #size-cells = <0>;
 783                                 compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
 784                                 reg = <0x021a4000 0x4000>;
 785                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 786                                 clocks = <&clks IMX6SLL_CLK_I2C2>;
 787                                 status = "disabled";
 788                         };
 789
 790                         i2c3: i2c@021a8000 {
 791                                 #address-cells = <1>;
 792                                 #size-cells = <0>;
 793                                 compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
 794                                 reg = <0x021a8000 0x4000>;
 795                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 796                                 clocks = <&clks IMX6SLL_CLK_I2C3>;
 797                                 status = "disabled";
 798                         };
 799
 800                         romcp@021ac000 {
 801                                 compatible = "fsl,imx6sll-romcp", "syscon";
 802                                 reg = <0x021ac000 0x4000>;
 803                         };
 804
 805                         mmdc: mmdc@021b0000 {
 806                                 compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
 807                                 reg = <0x021b0000 0x4000>;
 808                         };
 809
 810                         rngb: rngb@021b4000 {
 811                                 compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng";
 812                                 reg = <0x021b4000 0x4000>;
 813                                 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 814                                 clocks =  <&clks IMX6SLL_CLK_DUMMY>;
 815                         };
 816
 817                         ocotp: ocotp-ctrl@021bc000 {
 818                                 compatible = "fsl,imx6sll-ocotp", "syscon";
 819                                 reg = <0x021bc000 0x4000>;
 820                                 clocks = <&clks IMX6SLL_CLK_OCOTP>;
 821                         };
 822
 823                         csu: csu@021c0000 {
 824                                 compatible = "fsl,imx6sll-csu";
 825                                 reg = <0x021c0000 0x4000>;
 826                                 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 827                                 status = "disabled";
 828                         };
 829
 830                         snvs_gpr: snvs-gpr@0x021c4000 {
 831                                 compatible = "fsl, imx6sll-snvs-gpr";
 832                                 reg = <0x021c4000 0x10000>;
 833                         };
 834
 835                         iomuxc_snvs: iomuxc-snvs@021c8000 {
 836                                 compatible = "fsl,imx6sll-iomuxc-snvs";
 837                                 reg = <0x021c80000 0x10000>;
 838                         };
 839
 840                         audmux: audmux@021d8000 {
 841                                 compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
 842                                 reg = <0x021d8000 0x4000>;
 843                                 status = "disabled";
 844                         };
 845
 846                         uart5: serial@021f4000 {
 847                                 compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
 848                                 reg = <0x021f4000 0x4000>;
 849                                 interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 850                                 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
 851                                 dma-names = "rx", "tx";
 852                                 clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
 853                                          <&clks IMX6SLL_CLK_UART5_SERIAL>;
 854                                 clock-names = "ipg", "per";
 855                                 status = "disabled";
 856                         };
 857                 };
 858         };
 859 };