1 // SPDX-License-Identifier: GPL-2.0+ OR X11
3 * Copyright 2015 Timesys Corporation.
4 * Copyright 2015 General Electric Company
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License
13 * version 2 as published by the Free Software Foundation.
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "imx6q-bx50v3.dtsi"
49 model = "General Electric B850v3";
50 compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
58 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
59 <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
60 <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
61 <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
62 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
63 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
64 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
65 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
72 lvds0: lvds-channel@0 {
73 fsl,data-mapping = "spwg";
74 fsl,data-width = <24>;
81 remote-endpoint = <&stdp4028_in>;
89 compatible = "nxp,pca9547";
101 #address-cells = <1>;
107 #address-cells = <1>;
113 #address-cells = <1>;
119 #address-cells = <1>;
125 #address-cells = <1>;
131 #address-cells = <1>;
137 #address-cells = <1>;
145 ddc-i2c-bus = <&mux2_i2c1>;
150 compatible = "ti,ads7830";
156 clock-frequency = <100000>;
159 compatible = "megachips,stdp2690-ge-b850v3-fw";
163 #address-cells = <1>;
169 stdp2690_in: endpoint {
170 remote-endpoint = <&stdp4028_out>;
177 stdp2690_out: endpoint {
178 /* Connector for external display */
185 compatible = "megachips,stdp4028-ge-b850v3-fw";
187 interrupt-parent = <&gpio2>;
188 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
191 #address-cells = <1>;
197 stdp4028_in: endpoint {
198 remote-endpoint = <&lvds0_out>;
205 stdp4028_out: endpoint {
206 remote-endpoint = <&stdp2690_in>;
218 line-name = "PCA9539-P10";
225 line-name = "PCA9539-P11";
230 /* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */
232 compatible = "pci10b5,8605";
233 reg = <0x00010000 0 0 0 0>;
235 #address-cells = <3>;
237 #interrupt-cells = <1>;
240 compatible = "pci10b5,8605";
241 reg = <0x00020800 0 0 0 0>;
243 #address-cells = <3>;
245 #interrupt-cells = <1>;
247 /* Intel Corporation I210 Gigabit Network Connection */
249 compatible = "pci8086,1533";
250 reg = <0x00030000 0 0 0 0>;
255 compatible = "pci10b5,8605";
256 reg = <0x00021000 0 0 0 0>;
258 #address-cells = <3>;
260 #interrupt-cells = <1>;
262 /* Intel Corporation I210 Gigabit Network Connection */
263 switch_nic: ethernet@4,0 {
264 compatible = "pci8086,1533";
265 reg = <0x00040000 0 0 0 0>;
275 phy-handle = <&switchphy0>;
281 phy-handle = <&switchphy1>;
287 phy-handle = <&switchphy2>;
293 phy-handle = <&switchphy3>;
299 ethernet = <&switch_nic>;
300 phy-handle = <&switchphy4>;
304 #include "imx6q-bx50v3-uboot.dtsi"