arch/arm/dts/imx53-m53menlo.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (C) 2019 Marek Vasut <marex@denx.de>
   4  */
   5
   6 /dts-v1/;
   7 #include "imx53-m53.dtsi"
   8 #include "imx53-m53menlo-u-boot.dtsi"
   9
  10 / {
  11         model = "MENLO M53 EMBEDDED DEVICE";
  12         compatible = "menlo,m53menlo", "fsl,imx53";
  13
  14         leds {
  15                 compatible = "gpio-leds";
  16                 pinctrl-names = "default";
  17                 pinctrl-0 = <&pinctrl_led>;
  18
  19                 user1 {
  20                         label = "TestLed601";
  21                         gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
  22                         linux,default-trigger = "mmc0";
  23                 };
  24
  25                 user2 {
  26                         label = "TestLed602";
  27                         gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
  28                         linux,default-trigger = "heartbeat";
  29                 };
  30
  31                 eth {
  32                         label = "EthLedYe";
  33                         gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
  34                         linux,default-trigger = "none";
  35                 };
  36         };
  37
  38         panel {
  39                 compatible = "edt,etm070080dh6";
  40                 enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
  41
  42                 port {
  43                         panel_in: endpoint {
  44                                 remote-endpoint = <&lvds0_out>;
  45                         };
  46                 };
  47         };
  48
  49         reg_usbh1_vbus: regulator-usbh1-vbus {
  50                 compatible = "regulator-fixed";
  51                 regulator-name = "vbus";
  52                 regulator-min-microvolt = <5000000>;
  53                 regulator-max-microvolt = <5000000>;
  54                 gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
  55         };
  56 };
  57
  58 &can1 {
  59         pinctrl-names = "default";
  60         pinctrl-0 = <&pinctrl_can1>;
  61         status = "okay";
  62 };
  63
  64 &can2 {
  65         pinctrl-names = "default";
  66         pinctrl-0 = <&pinctrl_can2>;
  67         status = "okay";
  68 };
  69
  70 &clks {
  71         assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
  72                           <&clks IMX5_CLK_CKO1_PODF>,
  73                           <&clks IMX5_CLK_CKO1>;
  74         assigned-clock-parents = <&clks IMX5_CLK_AHB>;
  75         assigned-clock-rates = <133333334>, <33333334>, <33333334>;
  76 };
  77
  78 &esdhc1 {
  79         pinctrl-names = "default";
  80         pinctrl-0 = <&pinctrl_esdhc1>;
  81         cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  82         wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
  83         status = "okay";
  84 };
  85
  86 &fec {
  87         pinctrl-names = "default";
  88         pinctrl-0 = <&pinctrl_fec>;
  89         phy-mode = "rmii";
  90         status = "okay";
  91 };
  92
  93 &i2c1 {
  94         pinctrl-names = "default";
  95         pinctrl-0 = <&pinctrl_i2c1>;
  96         status = "okay";
  97
  98         touchscreen@38 {
  99                 compatible = "edt,edt-ft5x06";
 100                 reg = <0x38>;
 101                 pinctrl-names = "default";
 102                 pinctrl-0 = <&pinctrl_edt_ft5x06>;
 103                 interrupt-parent = <&gpio6>;
 104                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 105                 reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
 106                 wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 107         };
 108
 109         eeprom@50 {
 110                 compatible = "atmel,24c64";
 111                 reg = <0x50>;
 112                 pagesize = <32>;
 113         };
 114
 115         dac@60 {
 116                 compatible = "microchip,mcp4725";
 117                 reg = <0x60>;
 118         };
 119 };
 120
 121 &i2c2 {
 122         touchscreen@41 {
 123                 status = "disabled";
 124         };
 125 };
 126
 127 &i2c3 {
 128         pinctrl-names = "default";
 129         pinctrl-0 = <&pinctrl_i2c3>;
 130         status = "okay";
 131 };
 132
 133 &iomuxc {
 134         pinctrl-names = "default";
 135         pinctrl-0 = <&pinctrl_hog>;
 136
 137         imx53-m53evk {
 138                 hoggrp {
 139                         fsl,pins = <
 140                                 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK       0x1c4
 141                                 MX53_PAD_EIM_EB3__GPIO2_31              0x1d5
 142                                 MX53_PAD_PATA_DA_0__GPIO7_6             0x1d5
 143                                 MX53_PAD_GPIO_19__CCM_CLKO              0x1d5
 144                                 MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK       0x1d5
 145                                 MX53_PAD_CSI0_DAT4__GPIO5_22            0x1d5
 146                                 MX53_PAD_CSI0_DAT5__GPIO5_23            0x1d5
 147                                 MX53_PAD_CSI0_DAT6__GPIO5_24            0x1d5
 148                                 MX53_PAD_CSI0_DAT7__GPIO5_25            0x1d5
 149                                 MX53_PAD_CSI0_DAT8__GPIO5_26            0x1d5
 150                                 MX53_PAD_CSI0_DAT9__GPIO5_27            0x1d5
 151                                 MX53_PAD_CSI0_DAT10__GPIO5_28           0x1d5
 152                                 MX53_PAD_CSI0_DAT11__GPIO5_29           0x1d5
 153                                 MX53_PAD_CSI0_DAT14__GPIO6_0            0x1d5
 154                         >;
 155                 };
 156
 157                 pinctrl_led: ledgrp {
 158                         fsl,pins = <
 159                                 MX53_PAD_CSI0_DAT15__GPIO6_1            0x1d5
 160                                 MX53_PAD_CSI0_DAT16__GPIO6_2            0x1d5
 161                         >;
 162                 };
 163
 164                 pinctrl_can1: can1grp {
 165                         fsl,pins = <
 166                                 MX53_PAD_GPIO_7__CAN1_TXCAN             0x1c4
 167                                 MX53_PAD_GPIO_8__CAN1_RXCAN             0x1c4
 168                         >;
 169                 };
 170
 171                 pinctrl_can2: can2grp {
 172                         fsl,pins = <
 173                                 MX53_PAD_KEY_COL4__CAN2_TXCAN           0x1c4
 174                                 MX53_PAD_KEY_ROW4__CAN2_RXCAN           0x1c4
 175                         >;
 176                 };
 177
 178                 pinctrl_display_gpio: display-gpiogrp {
 179                         fsl,pins = <
 180                                 MX53_PAD_CSI0_DAT12__GPIO5_30           0x1d5 /* Reset */
 181                                 MX53_PAD_CSI0_DAT13__GPIO5_31           0x1d5 /* Interrupt */
 182                         >;
 183                 };
 184
 185                 pinctrl_edt_ft5x06: edt-ft5x06grp {
 186                         fsl,pins = <
 187                                 MX53_PAD_PATA_DATA9__GPIO2_9            0x1d5 /* Reset */
 188                                 MX53_PAD_CSI0_DAT19__GPIO6_5            0x1d5 /* Interrupt */
 189                                 MX53_PAD_PATA_DATA10__GPIO2_10          0x1d5 /* Wake */
 190                         >;
 191                 };
 192
 193                 pinctrl_esdhc1: esdhc1grp {
 194                         fsl,pins = <
 195                                 MX53_PAD_SD1_DATA0__ESDHC1_DAT0         0x1d5
 196                                 MX53_PAD_SD1_DATA1__ESDHC1_DAT1         0x1d5
 197                                 MX53_PAD_SD1_DATA2__ESDHC1_DAT2         0x1d5
 198                                 MX53_PAD_SD1_DATA3__ESDHC1_DAT3         0x1d5
 199                                 MX53_PAD_SD1_CMD__ESDHC1_CMD            0x1d5
 200                                 MX53_PAD_SD1_CLK__ESDHC1_CLK            0x1d5
 201                         >;
 202                 };
 203
 204                 pinctrl_fec: fecgrp {
 205                         fsl,pins = <
 206                                 MX53_PAD_FEC_MDC__FEC_MDC               0x4
 207                                 MX53_PAD_FEC_MDIO__FEC_MDIO             0x1fc
 208                                 MX53_PAD_FEC_REF_CLK__FEC_TX_CLK        0x180
 209                                 MX53_PAD_FEC_RX_ER__FEC_RX_ER           0x180
 210                                 MX53_PAD_FEC_CRS_DV__FEC_RX_DV          0x180
 211                                 MX53_PAD_FEC_RXD1__FEC_RDATA_1          0x180
 212                                 MX53_PAD_FEC_RXD0__FEC_RDATA_0          0x180
 213                                 MX53_PAD_FEC_TX_EN__FEC_TX_EN           0x4
 214                                 MX53_PAD_FEC_TXD1__FEC_TDATA_1          0x4
 215                                 MX53_PAD_FEC_TXD0__FEC_TDATA_0          0x4
 216                         >;
 217                 };
 218
 219                 pinctrl_i2c1: i2c1grp {
 220                         fsl,pins = <
 221                                 MX53_PAD_EIM_D21__I2C1_SCL              0x400001e4
 222                                 MX53_PAD_EIM_D28__I2C1_SDA              0x400001e4
 223                         >;
 224                 };
 225
 226                 pinctrl_i2c3: i2c3grp {
 227                         fsl,pins = <
 228                                 MX53_PAD_GPIO_6__I2C3_SDA               0x400001e4
 229                                 MX53_PAD_GPIO_5__I2C3_SCL               0x400001e4
 230                         >;
 231                 };
 232
 233                 pinctrl_lvds0: lvds0grp {
 234                         /* LVDS pins only have pin mux configuration */
 235                         fsl,pins = <
 236                                 MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK     0x80000000
 237                                 MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0     0x80000000
 238                                 MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1     0x80000000
 239                                 MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2     0x80000000
 240                                 MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3     0x80000000
 241                         >;
 242                 };
 243
 244                 pinctrl_uart1: uart1grp {
 245                         fsl,pins = <
 246                                 MX53_PAD_PATA_DIOW__UART1_TXD_MUX       0x1e4
 247                                 MX53_PAD_PATA_DMACK__UART1_RXD_MUX      0x1e4
 248                         >;
 249                 };
 250
 251                 pinctrl_uart2: uart2grp {
 252                         fsl,pins = <
 253                                 MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX  0x1e4
 254                                 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX      0x1e4
 255                         >;
 256                 };
 257
 258                 pinctrl_usb: usbgrp {
 259                         fsl,pins = <
 260                                 MX53_PAD_GPIO_2__GPIO1_2                0x1d5
 261                                 MX53_PAD_GPIO_3__USBOH3_USBH1_OC        0x1d5
 262                         >;
 263                 };
 264         };
 265 };
 266
 267 &ldb {
 268         pinctrl-names = "default";
 269         pinctrl-0 = <&pinctrl_lvds0>;
 270         status = "okay";
 271
 272         lvds0: lvds-channel@0 {
 273                 reg = <0>;
 274                 fsl,data-mapping = "spwg";
 275                 fsl,data-width = <18>;
 276                 status = "okay";
 277
 278                 port@2 {
 279                         reg = <2>;
 280
 281                         lvds0_out: endpoint {
 282                                 remote-endpoint = <&panel_in>;
 283                         };
 284                 };
 285         };
 286 };
 287
 288 &uart1 {
 289         pinctrl-names = "default";
 290         pinctrl-0 = <&pinctrl_uart1>;
 291         status = "okay";
 292 };
 293
 294 &uart2 {
 295         pinctrl-names = "default";
 296         pinctrl-0 = <&pinctrl_uart2>;
 297         status = "okay";
 298 };
 299
 300 &usbh1 {
 301         pinctrl-names = "default";
 302         pinctrl-0 = <&pinctrl_usb>;
 303         vbus-supply = <&reg_usbh1_vbus>;
 304         phy_type = "utmi";
 305         dr_mode = "peripheral";
 306         status = "okay";
 307 };
 308
 309 &usbotg {
 310         dr_mode = "peripheral";
 311         status = "okay";
 312 };