arch/arm/dts/fsl-ls1088a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR X11
   2 /*
   3  * NXP ls1088a SOC common device tree source
   4  *
   5  * Copyright 2017 NXP
   6  */
   7
   8 / {
   9         compatible = "fsl,ls1088a";
  10         interrupt-parent = <&gic>;
  11         #address-cells = <2>;
  12         #size-cells = <2>;
  13
  14         memory@80000000 {
  15                 device_type = "memory";
  16                 reg = <0x00000000 0x80000000 0 0x80000000>;
  17                       /* DRAM space - 1, size : 2 GB DRAM */
  18         };
  19
  20         gic: interrupt-controller@6000000 {
  21                 compatible = "arm,gic-v3";
  22                 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
  23                       <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
  24                 #interrupt-cells = <3>;
  25                 interrupt-controller;
  26                 interrupts = <1 9 0x4>;
  27         };
  28
  29         timer {
  30                 compatible = "arm,armv8-timer";
  31                 interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
  32                              <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
  33                              <1 11 0x8>, /* Virtual PPI, active-low */
  34                              <1 10 0x8>; /* Hypervisor PPI, active-low */
  35         };
  36
  37         i2c0: i2c@2000000 {
  38                 compatible = "fsl,vf610-i2c";
  39                 #address-cells = <1>;
  40                 #size-cells = <0>;
  41                 reg = <0x0 0x2000000 0x0 0x10000>;
  42                 interrupts = <0 34 4>;
  43         };
  44
  45         i2c1: i2c@2010000 {
  46                 compatible = "fsl,vf610-i2c";
  47                 #address-cells = <1>;
  48                 #size-cells = <0>;
  49                 reg = <0x0 0x2010000 0x0 0x10000>;
  50                 interrupts = <0 34 4>;
  51         };
  52
  53         i2c2: i2c@2020000 {
  54                 compatible = "fsl,vf610-i2c";
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57                 reg = <0x0 0x2020000 0x0 0x10000>;
  58                 interrupts = <0 35 4>;
  59         };
  60
  61         i2c3: i2c@2030000 {
  62                 compatible = "fsl,vf610-i2c";
  63                 #address-cells = <1>;
  64                 #size-cells = <0>;
  65                 reg = <0x0 0x2030000 0x0 0x10000>;
  66                 interrupts = <0 35 4>;
  67         };
  68
  69         serial0: serial@21c0500 {
  70                 device_type = "serial";
  71                 compatible = "fsl,ns16550", "ns16550a";
  72                 reg = <0x0 0x21c0500 0x0 0x100>;
  73                 clock-frequency = <0>;  /* Updated by bootloader */
  74                 interrupts = <0 32 0x1>; /* edge triggered */
  75         };
  76
  77         serial1: serial@21c0600 {
  78                 device_type = "serial";
  79                 compatible = "fsl,ns16550", "ns16550a";
  80                 reg = <0x0 0x21c0600 0x0 0x100>;
  81                 clock-frequency = <0>;  /* Updated by bootloader */
  82                 interrupts = <0 32 0x1>; /* edge triggered */
  83         };
  84
  85         fsl_mc: fsl-mc@80c000000 {
  86                 compatible = "fsl,qoriq-mc";
  87                 reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
  88                       <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
  89         };
  90
  91         dspi: dspi@2100000 {
  92                 compatible = "fsl,vf610-dspi";
  93                 #address-cells = <1>;
  94                 #size-cells = <0>;
  95                 reg = <0x0 0x2100000 0x0 0x10000>;
  96                 interrupts = <0 26 0x4>; /* Level high type */
  97                 num-cs = <6>;
  98         };
  99
 100         qspi: quadspi@1550000 {
 101                 compatible = "fsl,vf610-qspi";
 102                 #address-cells = <1>;
 103                 #size-cells = <0>;
 104                 reg = <0x0 0x20c0000 0x0 0x10000>,
 105                         <0x0 0x20000000 0x0 0x10000000>;
 106                 reg-names = "QuadSPI", "QuadSPI-memory";
 107                 num-cs = <4>;
 108         };
 109
 110         esdhc: esdhc@2140000 {
 111                 compatible = "fsl,esdhc";
 112                 reg = <0x0 0x2140000 0x0 0x10000>;
 113                 interrupts = <0 28 0x4>; /* Level high type */
 114                 little-endian;
 115                 bus-width = <4>;
 116         };
 117
 118         ifc: ifc@1530000 {
 119                 compatible = "fsl,ifc", "simple-bus";
 120                 reg = <0x0 0x2240000 0x0 0x20000>;
 121                 interrupts = <0 21 0x4>; /* Level high type */
 122         };
 123
 124         usb0: usb3@3100000 {
 125                 compatible = "fsl,layerscape-dwc3";
 126                 reg = <0x0 0x3100000 0x0 0x10000>;
 127                 interrupts = <0 80 0x4>; /* Level high type */
 128                 dr_mode = "host";
 129         };
 130
 131         usb1: usb3@3110000 {
 132                 compatible = "fsl,layerscape-dwc3";
 133                 reg = <0x0 0x3110000 0x0 0x10000>;
 134                 interrupts = <0 81 0x4>; /* Level high type */
 135                 dr_mode = "host";
 136         };
 137
 138         pcie@3400000 {
 139                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 140                 reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
 141                        0x00 0x03480000 0x0 0x80000   /* lut registers */
 142                        0x00 0x034c0000 0x0 0x40000   /* pf controls registers */
 143                        0x20 0x00000000 0x0 0x20000>; /* configuration space */
 144                 reg-names = "dbi", "lut", "ctrl", "config";
 145                 #address-cells = <3>;
 146                 #size-cells = <2>;
 147                 device_type = "pci";
 148                 num-lanes = <4>;
 149                 bus-range = <0x0 0xff>;
 150                 ranges = <0x81000000 0x0 0x00000000 0x20 0x00020000 0x0 0x00010000   /* downstream I/O */
 151                           0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 152         };
 153
 154         pcie@3500000 {
 155                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 156                 reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
 157                        0x00 0x03580000 0x0 0x80000   /* lut registers */
 158                        0x00 0x035c0000 0x0 0x40000   /* pf controls registers */
 159                        0x28 0x00000000 0x0 0x20000>; /* configuration space */
 160                 reg-names = "dbi", "lut", "ctrl", "config";
 161                 #address-cells = <3>;
 162                 #size-cells = <2>;
 163                 device_type = "pci";
 164                 num-lanes = <4>;
 165                 bus-range = <0x0 0xff>;
 166                 ranges = <0x81000000 0x0 0x00000000 0x28 0x00020000 0x0 0x00010000   /* downstream I/O */
 167                           0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 168         };
 169
 170         pcie@3600000 {
 171                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 172                 reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
 173                        0x00 0x03680000 0x0 0x80000   /* lut registers */
 174                        0x00 0x036c0000 0x0 0x40000   /* pf controls registers */
 175                        0x30 0x00000000 0x0 0x20000>; /* configuration space */
 176                 reg-names = "dbi", "lut", "ctrl", "config";
 177                 #address-cells = <3>;
 178                 #size-cells = <2>;
 179                 device_type = "pci";
 180                 num-lanes = <8>;
 181                 bus-range = <0x0 0xff>;
 182                 ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0 0x00010000   /* downstream I/O */
 183                           0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 184         };
 185
 186         sata: sata@3200000 {
 187                 compatible = "fsl,ls1088a-ahci";
 188                 reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
 189                        0x7 0x100520  0x0 0x4>;   /* ecc sata addr*/
 190                 reg-names = "sata-base", "ecc-addr";
 191                 interrupts = <0 133 4>;
 192                 status = "disabled";
 193         };
 194
 195 };