Merge git://git.denx.de/u-boot-video
[oweals/u-boot.git] / arch / arm / dts / exynos5800-peach-pi.dts
1 /*
2  * SAMSUNG/GOOGLE Peach-Pit board device tree source
3  *
4  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 /dts-v1/;
11 #include "exynos54xx.dtsi"
12
13 / {
14         model = "Samsung/Google Peach Pi board based on Exynos5800";
15         cpu-model = "Exynos5800";
16
17         compatible = "google,pit-rev#", "google,pit",
18                 "google,peach", "samsung,exynos5800", "samsung,exynos5";
19
20         config {
21                 google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
22                 hwid = "PIT TEST A-A 7848";
23                 lazy-init = <1>;
24         };
25
26         aliases {
27                 serial0 = "/serial@12C30000";
28                 console = "/serial@12C30000";
29                 pmic = "/i2c@12CA0000";
30                 i2c104 = &i2c_tunnel;
31         };
32
33         backlight: backlight {
34                 compatible = "pwm-backlight";
35                 pwms = <&pwm 0 1000000 0>;
36                 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
37                 default-brightness-level = <7>;
38                 enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
39                 power-supply = <&tps65090_fet1>;
40         };
41
42         panel: panel {
43                 compatible = "auo,b133htn01";
44                 power-supply = <&tps65090_fet6>;
45                 backlight = <&backlight>;
46
47                 port {
48                         panel_in: endpoint {
49                                 remote-endpoint = <&dp_out>;
50                         };
51                 };
52         };
53
54         dmc {
55                 mem-manuf = "samsung";
56                 mem-type = "ddr3";
57                 clock-frequency = <800000000>;
58                 arm-frequency = <900000000>;
59         };
60
61         tmu@10060000 {
62                 samsung,min-temp        = <25>;
63                 samsung,max-temp        = <125>;
64                 samsung,start-warning   = <95>;
65                 samsung,start-tripping  = <105>;
66                 samsung,hw-tripping     = <110>;
67                 samsung,efuse-min-value = <40>;
68                 samsung,efuse-value     = <55>;
69                 samsung,efuse-max-value = <100>;
70                 samsung,slope           = <274761730>;
71                 samsung,dc-value        = <25>;
72         };
73
74         /* MAX77802 is on i2c bus 4 */
75         i2c@12CA0000 {
76                 clock-frequency = <400000>;
77                 power-regulator@9 {
78                         compatible = "maxim,max77802-pmic";
79                         reg = <0x9>;
80                 };
81         };
82
83         i2c@12CD0000 { /* i2c7 */
84                 clock-frequency = <100000>;
85                soundcodec@20 {
86                       reg = <0x20>;
87                       compatible = "maxim,max98090-codec";
88                };
89         };
90
91         sound@3830000 {
92                 samsung,codec-type = "max98090";
93         };
94
95         i2c@12E10000 { /* i2c9 */
96                 clock-frequency = <400000>;
97                 tpm@20 {
98                         compatible = "infineon,slb9645tt";
99                         reg = <0x20>;
100                 };
101         };
102
103         spi@12d30000 { /* spi1 */
104                 spi-max-frequency = <50000000>;
105                 firmware_storage_spi: flash@0 {
106                         reg = <0>;
107
108                         /*
109                          * A region for the kernel to store a panic event
110                          * which the firmware will add to the log.
111                         */
112                         elog-panic-event-offset = <0x01e00000 0x100000>;
113
114                         elog-shrink-size = <0x400>;
115                         elog-full-threshold = <0xc00>;
116                 };
117         };
118
119         xhci@12000000 {
120                 samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
121         };
122
123         xhci@12400000 {
124                 samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
125         };
126
127         fimd@14400000 {
128                 samsung,vl-freq = <60>;
129                 samsung,vl-col = <1920>;
130                 samsung,vl-row = <1080>;
131                 samsung,vl-width = <1920>;
132                 samsung,vl-height = <1080>;
133
134                 samsung,vl-clkp;
135                 samsung,vl-dp;
136                 samsung,vl-bpix = <4>;
137
138                 samsung,vl-hspw = <80>;
139                 samsung,vl-hbpd = <172>;
140                 samsung,vl-hfpd = <60>;
141                 samsung,vl-vspw = <10>;
142                 samsung,vl-vbpd = <25>;
143                 samsung,vl-vfpd = <10>;
144                 samsung,vl-cmd-allow-len = <0xf>;
145
146                 samsung,power-on-delay = <30000>;
147                 samsung,winid = <3>;
148                 samsung,interface-mode = <1>;
149                 samsung,dp-enabled = <1>;
150                 samsung,dual-lcd-enabled = <0>;
151
152                 samsung,bl-en-gpio = <&gpx2 2 GPIO_ACTIVE_HIGH>;
153         };
154 };
155
156 &dp {
157         status = "okay";
158         samsung,color-space = <0>;
159         samsung,dynamic-range = <0>;
160         samsung,ycbcr-coeff = <0>;
161         samsung,color-depth = <1>;
162         samsung,link-rate = <0x0a>;
163         samsung,lane-count = <2>;
164         samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
165
166         ports {
167                 port {
168                         dp_out: endpoint {
169                                 remote-endpoint = <&panel_in>;
170                         };
171                 };
172         };
173 };
174
175 &spi_2 {
176         spi-max-frequency = <3125000>;
177         spi-deactivate-delay = <200>;
178         status = "okay";
179         num-cs = <1>;
180         samsung,spi-src-clk = <0>;
181         cs-gpios = <&gpb1 2 0>;
182
183         cros_ec: cros-ec@0 {
184                 compatible = "google,cros-ec-spi";
185                 interrupt-parent = <&gpx1>;
186                 interrupts = <5 0>;
187                 reg = <0>;
188                 spi-half-duplex;
189                 spi-max-timeout-ms = <1100>;
190                 ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
191
192                 /*
193                  * This describes the flash memory within the EC. Note
194                  * that the STM32L flash erases to 0, not 0xff.
195                  */
196                 #address-cells = <1>;
197                 #size-cells = <1>;
198                 flash@8000000 {
199                         reg = <0x08000000 0x20000>;
200                         erase-value = <0>;
201                 };
202
203                 controller-data {
204                         samsung,spi-feedback-delay = <1>;
205                 };
206
207                 i2c_tunnel: i2c-tunnel {
208                         compatible = "google,cros-ec-i2c-tunnel";
209                         #address-cells = <1>;
210                         #size-cells = <0>;
211                         google,remote-bus = <0>;
212
213                         battery: sbs-battery@b {
214                                 compatible = "sbs,sbs-battery";
215                                 reg = <0xb>;
216                                 sbs,poll-retry-count = <1>;
217                                 sbs,i2c-retry-count = <2>;
218                         };
219
220                         power-regulator@48 {
221                                 compatible = "ti,tps65090";
222                                 reg = <0x48>;
223
224                                 regulators {
225                                         tps65090_dcdc1: dcdc1 {
226                                                 ti,enable-ext-control;
227                                         };
228                                         tps65090_dcdc2: dcdc2 {
229                                                 ti,enable-ext-control;
230                                         };
231                                         tps65090_dcdc3: dcdc3 {
232                                                 ti,enable-ext-control;
233                                         };
234                                         tps65090_fet1: fet1 {
235                                                 regulator-name = "vcd_led";
236                                         };
237                                         tps65090_fet2: fet2 {
238                                                 regulator-name = "video_mid";
239                                                 regulator-always-on;
240                                         };
241                                         tps65090_fet3: fet3 {
242                                                 regulator-name = "wwan_r";
243                                                 regulator-always-on;
244                                         };
245                                         tps65090_fet4: fet4 {
246                                                 regulator-name = "sdcard";
247                                                 regulator-always-on;
248                                         };
249                                         tps65090_fet5: fet5 {
250                                                 regulator-name = "camout";
251                                                 regulator-always-on;
252                                         };
253                                         tps65090_fet6: fet6 {
254                                                 regulator-name = "lcd_vdd";
255                                         };
256                                         tps65090_fet7: fet7 {
257                                                 regulator-name = "video_mid_1a";
258                                                 regulator-always-on;
259                                         };
260                                         tps65090_ldo1: ldo1 {
261                                         };
262                                         tps65090_ldo2: ldo2 {
263                                         };
264                                 };
265
266                                 charger {
267                                         compatible = "ti,tps65090-charger";
268                                 };
269                         };
270                 };
271         };
272 };
273
274 #include "cros-ec-keyboard.dtsi"