2 * SAMSUNG Snow board device tree source
4 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
13 #include "exynos5250.dtsi"
16 model = "Google Snow";
17 compatible = "google,snow", "samsung,exynos5250";
20 i2c0 = "/i2c@12c60000";
21 i2c1 = "/i2c@12c70000";
22 i2c2 = "/i2c@12c80000";
23 i2c3 = "/i2c@12c90000";
24 i2c4 = "/i2c@12ca0000";
25 i2c5 = "/i2c@12cb0000";
26 i2c6 = "/i2c@12cc0000";
27 i2c7 = "/i2c@12cd0000";
28 spi0 = "/spi@12d20000";
29 spi1 = "/spi@12d30000";
30 spi2 = "/spi@12d40000";
31 spi3 = "/spi@131a0000";
32 spi4 = "/spi@131b0000";
33 mmc0 = "/mmc@12200000";
34 mmc1 = "/mmc@12210000";
35 mmc2 = "/mmc@12220000";
36 mmc3 = "/mmc@12230000";
37 serial0 = "/serial@12C30000";
38 console = "/serial@12C30000";
39 i2s = "/sound@3830000";
45 compatible = "google,cros-ec-i2c";
46 i2c-max-frequency = <100000>;
47 u-boot,i2c-offset-len = <0>;
48 ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
52 compatible = "ti,tps65090";
58 spi-max-frequency = <50000000>;
59 firmware_storage_spi: flash@0 {
60 compatible = "spi-flash";
66 spi-max-frequency = <1000000>;
67 spi-deactivate-delay = <100>;
70 compatible = "google,cros-ec-i2c";
72 spi-max-frequency = <5000000>;
73 ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
80 samsung,codec-type = "max98095";
81 codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>;
91 compatible = "maxim,max98095-codec";
95 compatible = "nxp,ptn3460";
98 * TODO(sjg@chromium.org): Use GPIOs here
99 * powerdown-gpio = <&gpy2 5 0>;
100 * reset-gpio = <&gpx1 5 0>;
101 * edid-emulation = <5>;
102 * pinctrl-names = "default";
103 * pinctrl-0 = <&ptn3460_gpios>;
111 compatible = "maxim,max77686_pmic";
116 samsung,bus-width = <8>;
117 samsung,timing = <1 3 3>;
118 samsung,removable = <0>;
126 samsung,bus-width = <4>;
127 samsung,timing = <1 2 3>;
128 samsung,removable = <1>;
136 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
141 samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
145 samsung,min-temp = <25>;
146 samsung,max-temp = <125>;
147 samsung,start-warning = <95>;
148 samsung,start-tripping = <105>;
149 samsung,hw-tripping = <110>;
150 samsung,efuse-min-value = <40>;
151 samsung,efuse-value = <55>;
152 samsung,efuse-max-value = <100>;
153 samsung,slope = <274761730>;
154 samsung,dc-value = <25>;
158 samsung,vl-freq = <60>;
159 samsung,vl-col = <1366>;
160 samsung,vl-row = <768>;
161 samsung,vl-width = <1366>;
162 samsung,vl-height = <768>;
169 samsung,vl-bpix = <4>;
171 samsung,vl-hspw = <32>;
172 samsung,vl-hbpd = <80>;
173 samsung,vl-hfpd = <48>;
174 samsung,vl-vspw = <5>;
175 samsung,vl-vbpd = <14>;
176 samsung,vl-vfpd = <3>;
177 samsung,vl-cmd-allow-len = <0xf>;
180 samsung,interface-mode = <1>;
181 samsung,dp-enabled = <1>;
182 samsung,dual-lcd-enabled = <0>;
186 samsung,lt-status = <0>;
188 samsung,master-mode = <0>;
189 samsung,bist-mode = <0>;
190 samsung,bist-pattern = <0>;
191 samsung,h-sync-polarity = <0>;
192 samsung,v-sync-polarity = <0>;
193 samsung,interlaced = <0>;
194 samsung,color-space = <0>;
195 samsung,dynamic-range = <0>;
196 samsung,ycbcr-coeff = <0>;
197 samsung,color-depth = <1>;
202 #include "cros-ec-keyboard.dtsi"