2 * Samsung's Exynos4210 based Universal C210 board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * SPDX-License-Identifier: GPL-2.0+
11 #include "exynos4210.dtsi"
14 model = "Samsung Universal C210 based on Exynos4210 rev0";
15 compatible = "samsung,universal_c210", "samsung,exynos4210";
18 serial0 = "/serial@13800000";
19 console = "/serial@13820000";
23 compatible = "spi-gpio";
24 cs-gpios = <&gpy4 3 0>;
25 gpio-sck = <&gpy3 1 0>;
26 gpio-mosi = <&gpy3 3 0>;
27 gpio-miso = <&gpy3 0 0>;
36 compatible = "samsung,exynos-fimd";
37 reg = <0x11c00000 0xa4>;
39 samsung,vl-freq = <60>;
40 samsung,vl-col = <480>;
41 samsung,vl-row = <800>;
42 samsung,vl-width = <480>;
43 samsung,vl-height = <800>;
45 samsung,vl-clkp = <0>;
50 samsung,vl-bpix = <4>;
52 samsung,vl-hspw = <2>;
53 samsung,vl-hbpd = <16>;
54 samsung,vl-hfpd = <16>;
55 samsung,vl-vspw = <2>;
56 samsung,vl-vbpd = <8>;
57 samsung,vl-vfpd = <8>;
58 samsung,vl-cmd-allow-len = <0xf>;
60 samsung,pclk_name = <1>;
61 samsung,sclk_div = <1>;
64 samsung,power-on-delay = <10000>;
65 samsung,interface-mode = <1>;
66 samsung,mipi-enabled = <0>;
68 samsung,dual-lcd-enabled;
70 samsung,logo-on = <1>;
71 samsung,resolution = <0>;
72 samsung,rgb-mode = <0>;
77 clock-frequency = <100000>;
81 compatible = "maxim,max8998";
85 regulator-name = "VALIVE_1.2V";
86 regulator-min-microvolt = <1200000>;
87 regulator-max-microvolt = <1200000>;
92 regulator-name = "VUSB+MIPI_1.1V";
93 regulator-min-microvolt = <1100000>;
94 regulator-max-microvolt = <1100000>;
99 regulator-name = "VADC_3.3V";
100 regulator-min-microvolt = <3300000>;
101 regulator-max-microvolt = <3300000>;
105 regulator-name = "VTF_2.8V";
106 regulator-min-microvolt = <2800000>;
107 regulator-max-microvolt = <2800000>;
111 regulator-name = "LDO6";
112 regulator-min-microvolt = <2000000>;
113 regulator-max-microvolt = <2000000>;
117 regulator-name = "VLCD+VMIPI_1.8V";
118 regulator-min-microvolt = <1800000>;
119 regulator-max-microvolt = <1800000>;
123 regulator-name = "VUSB+VDAC_3.3V";
124 regulator-min-microvolt = <3300000>;
125 regulator-max-microvolt = <3300000>;
130 regulator-name = "VCC_2.8V";
131 regulator-min-microvolt = <2800000>;
132 regulator-max-microvolt = <2800000>;
137 regulator-name = "VPLL_1.1V";
138 regulator-min-microvolt = <1100000>;
139 regulator-max-microvolt = <1100000>;
145 regulator-name = "CAM_AF_3.3V";
146 regulator-min-microvolt = <3300000>;
147 regulator-max-microvolt = <3300000>;
151 regulator-name = "PS_2.8V";
152 regulator-min-microvolt = <2800000>;
153 regulator-max-microvolt = <2800000>;
157 regulator-name = "VHIC_1.2V";
158 regulator-min-microvolt = <1200000>;
159 regulator-max-microvolt = <1200000>;
163 regulator-name = "CAM_I_HOST_1.8V";
164 regulator-min-microvolt = <1800000>;
165 regulator-max-microvolt = <1800000>;
169 regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
170 regulator-min-microvolt = <1200000>;
171 regulator-max-microvolt = <1200000>;
175 regulator-name = "CAM_S_ANA_2.8V";
176 regulator-min-microvolt = <2800000>;
177 regulator-max-microvolt = <2800000>;
181 regulator-name = "VCC_3.0V_LCD";
182 regulator-min-microvolt = <3000000>;
183 regulator-max-microvolt = <3000000>;
187 regulator-name = "VINT_1.1V";
188 regulator-min-microvolt = <750000>;
189 regulator-max-microvolt = <1500000>;
195 regulator-name = "VG3D_1.1V";
196 regulator-min-microvolt = <750000>;
197 regulator-max-microvolt = <1500000>;
202 regulator-name = "VCC_1.8V";
203 regulator-min-microvolt = <1800000>;
204 regulator-max-microvolt = <1800000>;
209 regulator-name = "VMEM_1.2V";
210 regulator-min-microvolt = <1200000>;
211 regulator-max-microvolt = <1200000>;
215 ap32khz_reg: EN32KHz-AP {
216 regulator-name = "32KHz AP";
220 cp32khz_reg: EN32KHz-CP {
221 regulator-name = "32KHz CP";
225 regulator-name = "VICHG";
228 safeout1_reg: ESAFEOUT1 {
229 regulator-name = "SAFEOUT1";
232 safeout2_reg: ESAFEOUT2 {
233 regulator-name = "SAFEOUT2";
241 samsung,bus-width = <8>;
242 samsung,timing = <1 3 3>;
243 pwr-gpios = <&gpk0 2 0>;
248 samsung,bus-width = <4>;
249 samsung,timing = <1 2 3>;
250 cd-gpios = <&gpx3 4 0>;