arch/arm/dts/dra7-evm.dts

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "dra74x.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12
  13 / {
  14         model = "TI DRA742";
  15         compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
  16
  17         chosen {
  18                 stdout-path = &uart1;
  19                 tick-timer = &timer2;
  20         };
  21
  22         memory {
  23                 device_type = "memory";
  24                 reg = <0x80000000 0x60000000>; /* 1536 MB */
  25         };
  26
  27         mmc2_3v3: fixedregulator-mmc2 {
  28                 compatible = "regulator-fixed";
  29                 regulator-name = "mmc2_3v3";
  30                 regulator-min-microvolt = <3300000>;
  31                 regulator-max-microvolt = <3300000>;
  32         };
  33
  34         extcon_usb1: extcon_usb1 {
  35                 compatible = "linux,extcon-usb-gpio";
  36                 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
  37         };
  38
  39         extcon_usb2: extcon_usb2 {
  40                 compatible = "linux,extcon-usb-gpio";
  41                 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
  42         };
  43
  44         vtt_fixed: fixedregulator-vtt {
  45                 compatible = "regulator-fixed";
  46                 regulator-name = "vtt_fixed";
  47                 regulator-min-microvolt = <1350000>;
  48                 regulator-max-microvolt = <1350000>;
  49                 regulator-always-on;
  50                 regulator-boot-on;
  51                 enable-active-high;
  52                 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
  53         };
  54 };
  55
  56 &dra7_pmx_core {
  57         pinctrl-names = "default";
  58         pinctrl-0 = <&vtt_pin>;
  59
  60         vtt_pin: pinmux_vtt_pin {
  61                 pinctrl-single,pins = <
  62                         0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
  63                 >;
  64         };
  65
  66         i2c1_pins: pinmux_i2c1_pins {
  67                 pinctrl-single,pins = <
  68                         0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
  69                         0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
  70                 >;
  71         };
  72
  73         i2c2_pins: pinmux_i2c2_pins {
  74                 pinctrl-single,pins = <
  75                         0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
  76                         0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
  77                 >;
  78         };
  79
  80         i2c3_pins: pinmux_i2c3_pins {
  81                 pinctrl-single,pins = <
  82                         0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
  83                         0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
  84                 >;
  85         };
  86
  87         mcspi1_pins: pinmux_mcspi1_pins {
  88                 pinctrl-single,pins = <
  89                         0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
  90                         0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
  91                         0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
  92                         0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
  93                         0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
  94                         0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
  95                 >;
  96         };
  97
  98         mcspi2_pins: pinmux_mcspi2_pins {
  99                 pinctrl-single,pins = <
 100                         0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
 101                         0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
 102                         0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
 103                         0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
 104                 >;
 105         };
 106
 107         uart1_pins: pinmux_uart1_pins {
 108                 pinctrl-single,pins = <
 109                         0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
 110                         0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
 111                         0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
 112                         0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
 113                 >;
 114         };
 115
 116         uart2_pins: pinmux_uart2_pins {
 117                 pinctrl-single,pins = <
 118                         0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
 119                         0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
 120                         0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
 121                         0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
 122                 >;
 123         };
 124
 125         uart3_pins: pinmux_uart3_pins {
 126                 pinctrl-single,pins = <
 127                         0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
 128                         0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
 129                 >;
 130         };
 131
 132         qspi1_pins: pinmux_qspi1_pins {
 133                 pinctrl-single,pins = <
 134                         0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
 135                         0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
 136                         0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
 137                         0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
 138                         0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
 139                         0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
 140                         0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
 141                         0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
 142                         0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
 143                         0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
 144                 >;
 145         };
 146
 147         usb1_pins: pinmux_usb1_pins {
 148                 pinctrl-single,pins = <
 149                         0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 150                 >;
 151         };
 152
 153         usb2_pins: pinmux_usb2_pins {
 154                 pinctrl-single,pins = <
 155                         0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
 156                 >;
 157         };
 158
 159         nand_flash_x16: nand_flash_x16 {
 160                 /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
 161                  * So NAND flash requires following switch settings:
 162                  * SW5.9 (GPMC_WPN) = LOW
 163                  * SW5.1 (NAND_BOOTn) = HIGH */
 164                 pinctrl-single,pins = <
 165                         0x0     (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad0     */
 166                         0x4     (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad1     */
 167                         0x8     (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad2     */
 168                         0xc     (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad3     */
 169                         0x10    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad4     */
 170                         0x14    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad5     */
 171                         0x18    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad6     */
 172                         0x1c    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad7     */
 173                         0x20    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad8     */
 174                         0x24    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad9     */
 175                         0x28    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad10    */
 176                         0x2c    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad11    */
 177                         0x30    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad12    */
 178                         0x34    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad13    */
 179                         0x38    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad14    */
 180                         0x3c    (PIN_INPUT  | MUX_MODE0)        /* gpmc_ad15    */
 181                         0xd8    (PIN_INPUT_PULLUP  | MUX_MODE0) /* gpmc_wait0   */
 182                         0xcc    (PIN_OUTPUT | MUX_MODE0)        /* gpmc_wen     */
 183                         0xb4    (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0    */
 184                         0xc4    (PIN_OUTPUT | MUX_MODE0)        /* gpmc_advn_ale */
 185                         0xc8    (PIN_OUTPUT | MUX_MODE0)        /* gpmc_oen_ren  */
 186                         0xd0    (PIN_OUTPUT | MUX_MODE0)        /* gpmc_be0n_cle */
 187                 >;
 188         };
 189
 190         cpsw_default: cpsw_default {
 191                 pinctrl-single,pins = <
 192                         /* Slave 1 */
 193                         0x250 (PIN_OUTPUT | MUX_MODE0)  /* rgmii0_txc.rgmii0_txc */
 194                         0x254 (PIN_OUTPUT | MUX_MODE0)  /* rgmii0_txctl.rgmii0_txctl */
 195                         0x258 (PIN_OUTPUT | MUX_MODE0)  /* rgmii0_td3.rgmii0_txd3 */
 196                         0x25c (PIN_OUTPUT | MUX_MODE0)  /* rgmii0_txd2.rgmii0_txd2 */
 197                         0x260 (PIN_OUTPUT | MUX_MODE0)  /* rgmii0_txd1.rgmii0_txd1 */
 198                         0x264 (PIN_OUTPUT | MUX_MODE0)  /* rgmii0_txd0.rgmii0_txd0 */
 199                         0x268 (PIN_INPUT | MUX_MODE0)   /* rgmii0_rxc.rgmii0_rxc */
 200                         0x26c (PIN_INPUT | MUX_MODE0)   /* rgmii0_rxctl.rgmii0_rxctl */
 201                         0x270 (PIN_INPUT | MUX_MODE0)   /* rgmii0_rxd3.rgmii0_rxd3 */
 202                         0x274 (PIN_INPUT | MUX_MODE0)   /* rgmii0_rxd2.rgmii0_rxd2 */
 203                         0x278 (PIN_INPUT | MUX_MODE0)   /* rgmii0_rxd1.rgmii0_rxd1 */
 204                         0x27c (PIN_INPUT | MUX_MODE0)   /* rgmii0_rxd0.rgmii0_rxd0 */
 205
 206                         /* Slave 2 */
 207                         0x198 (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d12.rgmii1_txc */
 208                         0x19c (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d13.rgmii1_tctl */
 209                         0x1a0 (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d14.rgmii1_td3 */
 210                         0x1a4 (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d15.rgmii1_td2 */
 211                         0x1a8 (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d16.rgmii1_td1 */
 212                         0x1ac (PIN_OUTPUT | MUX_MODE3)  /* vin2a_d17.rgmii1_td0 */
 213                         0x1b0 (PIN_INPUT | MUX_MODE3)   /* vin2a_d18.rgmii1_rclk */
 214                         0x1b4 (PIN_INPUT | MUX_MODE3)   /* vin2a_d19.rgmii1_rctl */
 215                         0x1b8 (PIN_INPUT | MUX_MODE3)   /* vin2a_d20.rgmii1_rd3 */
 216                         0x1bc (PIN_INPUT | MUX_MODE3)   /* vin2a_d21.rgmii1_rd2 */
 217                         0x1c0 (PIN_INPUT | MUX_MODE3)   /* vin2a_d22.rgmii1_rd1 */
 218                         0x1c4 (PIN_INPUT | MUX_MODE3)   /* vin2a_d23.rgmii1_rd0 */
 219                 >;
 220
 221         };
 222
 223         cpsw_sleep: cpsw_sleep {
 224                 pinctrl-single,pins = <
 225                         /* Slave 1 */
 226                         0x250 (MUX_MODE15)
 227                         0x254 (MUX_MODE15)
 228                         0x258 (MUX_MODE15)
 229                         0x25c (MUX_MODE15)
 230                         0x260 (MUX_MODE15)
 231                         0x264 (MUX_MODE15)
 232                         0x268 (MUX_MODE15)
 233                         0x26c (MUX_MODE15)
 234                         0x270 (MUX_MODE15)
 235                         0x274 (MUX_MODE15)
 236                         0x278 (MUX_MODE15)
 237                         0x27c (MUX_MODE15)
 238
 239                         /* Slave 2 */
 240                         0x198 (MUX_MODE15)
 241                         0x19c (MUX_MODE15)
 242                         0x1a0 (MUX_MODE15)
 243                         0x1a4 (MUX_MODE15)
 244                         0x1a8 (MUX_MODE15)
 245                         0x1ac (MUX_MODE15)
 246                         0x1b0 (MUX_MODE15)
 247                         0x1b4 (MUX_MODE15)
 248                         0x1b8 (MUX_MODE15)
 249                         0x1bc (MUX_MODE15)
 250                         0x1c0 (MUX_MODE15)
 251                         0x1c4 (MUX_MODE15)
 252                 >;
 253         };
 254
 255         davinci_mdio_default: davinci_mdio_default {
 256                 pinctrl-single,pins = <
 257                         0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* mdio_d.mdio_d */
 258                         0x240 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mdio_clk.mdio_clk */
 259                 >;
 260         };
 261
 262         davinci_mdio_sleep: davinci_mdio_sleep {
 263                 pinctrl-single,pins = <
 264                         0x23c (MUX_MODE15)
 265                         0x240 (MUX_MODE15)
 266                 >;
 267         };
 268
 269         dcan1_pins_default: dcan1_pins_default {
 270                 pinctrl-single,pins = <
 271                         0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
 272                         0x418   (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 273                 >;
 274         };
 275
 276         dcan1_pins_sleep: dcan1_pins_sleep {
 277                 pinctrl-single,pins = <
 278                         0x3d0   (MUX_MODE15 | PULL_UP)  /* dcan1_tx.off */
 279                         0x418   (MUX_MODE15 | PULL_UP)  /* wakeup0.off */
 280                 >;
 281         };
 282 };
 283
 284 &i2c1 {
 285         status = "okay";
 286         pinctrl-names = "default";
 287         pinctrl-0 = <&i2c1_pins>;
 288         clock-frequency = <400000>;
 289
 290         tps659038: tps659038@58 {
 291                 compatible = "ti,tps659038";
 292                 reg = <0x58>;
 293
 294                 tps659038_pmic {
 295                         compatible = "ti,tps659038-pmic";
 296
 297                         regulators {
 298                                 smps123_reg: smps123 {
 299                                         /* VDD_MPU */
 300                                         regulator-name = "smps123";
 301                                         regulator-min-microvolt = < 850000>;
 302                                         regulator-max-microvolt = <1250000>;
 303                                         regulator-always-on;
 304                                         regulator-boot-on;
 305                                 };
 306
 307                                 smps45_reg: smps45 {
 308                                         /* VDD_DSPEVE */
 309                                         regulator-name = "smps45";
 310                                         regulator-min-microvolt = < 850000>;
 311                                         regulator-max-microvolt = <1150000>;
 312                                         regulator-always-on;
 313                                         regulator-boot-on;
 314                                 };
 315
 316                                 smps6_reg: smps6 {
 317                                         /* VDD_GPU - over VDD_SMPS6 */
 318                                         regulator-name = "smps6";
 319                                         regulator-min-microvolt = <850000>;
 320                                         regulator-max-microvolt = <1250000>;
 321                                         regulator-always-on;
 322                                         regulator-boot-on;
 323                                 };
 324
 325                                 smps7_reg: smps7 {
 326                                         /* CORE_VDD */
 327                                         regulator-name = "smps7";
 328                                         regulator-min-microvolt = <850000>;
 329                                         regulator-max-microvolt = <1060000>;
 330                                         regulator-always-on;
 331                                         regulator-boot-on;
 332                                 };
 333
 334                                 smps8_reg: smps8 {
 335                                         /* VDD_IVAHD */
 336                                         regulator-name = "smps8";
 337                                         regulator-min-microvolt = < 850000>;
 338                                         regulator-max-microvolt = <1250000>;
 339                                         regulator-always-on;
 340                                         regulator-boot-on;
 341                                 };
 342
 343                                 smps9_reg: smps9 {
 344                                         /* VDDS1V8 */
 345                                         regulator-name = "smps9";
 346                                         regulator-min-microvolt = <1800000>;
 347                                         regulator-max-microvolt = <1800000>;
 348                                         regulator-always-on;
 349                                         regulator-boot-on;
 350                                 };
 351
 352                                 ldo1_reg: ldo1 {
 353                                         /* LDO1_OUT --> SDIO  */
 354                                         regulator-name = "ldo1";
 355                                         regulator-min-microvolt = <1800000>;
 356                                         regulator-max-microvolt = <3300000>;
 357                                         regulator-boot-on;
 358                                 };
 359
 360                                 ldo2_reg: ldo2 {
 361                                         /* VDD_RTCIO */
 362                                         /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
 363                                         regulator-name = "ldo2";
 364                                         regulator-min-microvolt = <3300000>;
 365                                         regulator-max-microvolt = <3300000>;
 366                                         regulator-always-on;
 367                                         regulator-boot-on;
 368                                 };
 369
 370                                 ldo3_reg: ldo3 {
 371                                         /* VDDA_1V8_PHY */
 372                                         regulator-name = "ldo3";
 373                                         regulator-min-microvolt = <1800000>;
 374                                         regulator-max-microvolt = <1800000>;
 375                                         regulator-always-on;
 376                                         regulator-boot-on;
 377                                 };
 378
 379                                 ldo9_reg: ldo9 {
 380                                         /* VDD_RTC */
 381                                         regulator-name = "ldo9";
 382                                         regulator-min-microvolt = <1050000>;
 383                                         regulator-max-microvolt = <1050000>;
 384                                         regulator-always-on;
 385                                         regulator-boot-on;
 386                                 };
 387
 388                                 ldoln_reg: ldoln {
 389                                         /* VDDA_1V8_PLL */
 390                                         regulator-name = "ldoln";
 391                                         regulator-min-microvolt = <1800000>;
 392                                         regulator-max-microvolt = <1800000>;
 393                                         regulator-always-on;
 394                                         regulator-boot-on;
 395                                 };
 396
 397                                 ldousb_reg: ldousb {
 398                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 399                                         regulator-name = "ldousb";
 400                                         regulator-min-microvolt = <3300000>;
 401                                         regulator-max-microvolt = <3300000>;
 402                                         regulator-boot-on;
 403                                 };
 404                         };
 405                 };
 406         };
 407
 408         pcf_gpio_21: gpio@21 {
 409                 compatible = "ti,pcf8575";
 410                 reg = <0x21>;
 411                 lines-initial-states = <0x1408>;
 412                 gpio-controller;
 413                 #gpio-cells = <2>;
 414                 interrupt-parent = <&gpio6>;
 415                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 416                 interrupt-controller;
 417                 #interrupt-cells = <2>;
 418         };
 419
 420 };
 421
 422 &i2c2 {
 423         status = "okay";
 424         pinctrl-names = "default";
 425         pinctrl-0 = <&i2c2_pins>;
 426         clock-frequency = <400000>;
 427 };
 428
 429 &i2c3 {
 430         status = "okay";
 431         pinctrl-names = "default";
 432         pinctrl-0 = <&i2c3_pins>;
 433         clock-frequency = <400000>;
 434 };
 435
 436 &mcspi1 {
 437         status = "okay";
 438         pinctrl-names = "default";
 439         pinctrl-0 = <&mcspi1_pins>;
 440 };
 441
 442 &mcspi2 {
 443         status = "okay";
 444         pinctrl-names = "default";
 445         pinctrl-0 = <&mcspi2_pins>;
 446 };
 447
 448 &uart1 {
 449         status = "okay";
 450         pinctrl-names = "default";
 451         pinctrl-0 = <&uart1_pins>;
 452         interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 453                               <&dra7_pmx_core 0x3e0>;
 454 };
 455
 456 &uart2 {
 457         status = "okay";
 458         pinctrl-names = "default";
 459         pinctrl-0 = <&uart2_pins>;
 460 };
 461
 462 &uart3 {
 463         status = "okay";
 464         pinctrl-names = "default";
 465         pinctrl-0 = <&uart3_pins>;
 466 };
 467
 468 &mmc1 {
 469         status = "okay";
 470         vmmc-supply = <&ldo1_reg>;
 471         bus-width = <4>;
 472         /*
 473          * SDCD signal is not being used here - using the fact that GPIO mode
 474          * is always hardwired.
 475          */
 476         cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 477 };
 478
 479 &mmc2 {
 480         status = "okay";
 481         vmmc-supply = <&mmc2_3v3>;
 482         bus-width = <8>;
 483 };
 484
 485 &cpu0 {
 486         cpu0-supply = <&smps123_reg>;
 487 };
 488
 489 &qspi {
 490         status = "okay";
 491         pinctrl-names = "default";
 492         pinctrl-0 = <&qspi1_pins>;
 493
 494         spi-max-frequency = <48000000>;
 495         m25p80@0 {
 496                 compatible = "s25fl256s1","spi-flash";
 497                 spi-max-frequency = <48000000>;
 498                 reg = <0>;
 499                 spi-tx-bus-width = <1>;
 500                 spi-rx-bus-width = <4>;
 501                 spi-cpol;
 502                 spi-cpha;
 503                 #address-cells = <1>;
 504                 #size-cells = <1>;
 505
 506                 /* MTD partition table.
 507                  * The ROM checks the first four physical blocks
 508                  * for a valid file to boot and the flash here is
 509                  * 64KiB block size.
 510                  */
 511                 partition@0 {
 512                         label = "QSPI.SPL";
 513                         reg = <0x00000000 0x000010000>;
 514                 };
 515                 partition@1 {
 516                         label = "QSPI.SPL.backup1";
 517                         reg = <0x00010000 0x00010000>;
 518                 };
 519                 partition@2 {
 520                         label = "QSPI.SPL.backup2";
 521                         reg = <0x00020000 0x00010000>;
 522                 };
 523                 partition@3 {
 524                         label = "QSPI.SPL.backup3";
 525                         reg = <0x00030000 0x00010000>;
 526                 };
 527                 partition@4 {
 528                         label = "QSPI.u-boot";
 529                         reg = <0x00040000 0x00100000>;
 530                 };
 531                 partition@5 {
 532                         label = "QSPI.u-boot-spl-os";
 533                         reg = <0x00140000 0x00080000>;
 534                 };
 535                 partition@6 {
 536                         label = "QSPI.u-boot-env";
 537                         reg = <0x001c0000 0x00010000>;
 538                 };
 539                 partition@7 {
 540                         label = "QSPI.u-boot-env.backup1";
 541                         reg = <0x001d0000 0x0010000>;
 542                 };
 543                 partition@8 {
 544                         label = "QSPI.kernel";
 545                         reg = <0x001e0000 0x0800000>;
 546                 };
 547                 partition@9 {
 548                         label = "QSPI.file-system";
 549                         reg = <0x009e0000 0x01620000>;
 550                 };
 551         };
 552 };
 553
 554 &omap_dwc3_1 {
 555         extcon = <&extcon_usb1>;
 556 };
 557
 558 &omap_dwc3_2 {
 559         extcon = <&extcon_usb2>;
 560 };
 561
 562 &usb1 {
 563         dr_mode = "peripheral";
 564         pinctrl-names = "default";
 565         pinctrl-0 = <&usb1_pins>;
 566 };
 567
 568 &usb2 {
 569         dr_mode = "host";
 570         pinctrl-names = "default";
 571         pinctrl-0 = <&usb2_pins>;
 572 };
 573
 574 &elm {
 575         status = "okay";
 576 };
 577
 578 &gpmc {
 579         status = "okay";
 580         pinctrl-names = "default";
 581         pinctrl-0 = <&nand_flash_x16>;
 582         ranges = <0 0 0 0x01000000>;    /* minimum GPMC partition = 16MB */
 583         nand@0,0 {
 584                 reg = <0 0 4>;          /* device IO registers */
 585                 ti,nand-ecc-opt = "bch8";
 586                 ti,elm-id = <&elm>;
 587                 nand-bus-width = <16>;
 588                 gpmc,device-width = <2>;
 589                 gpmc,sync-clk-ps = <0>;
 590                 gpmc,cs-on-ns = <0>;
 591                 gpmc,cs-rd-off-ns = <80>;
 592                 gpmc,cs-wr-off-ns = <80>;
 593                 gpmc,adv-on-ns = <0>;
 594                 gpmc,adv-rd-off-ns = <60>;
 595                 gpmc,adv-wr-off-ns = <60>;
 596                 gpmc,we-on-ns = <10>;
 597                 gpmc,we-off-ns = <50>;
 598                 gpmc,oe-on-ns = <4>;
 599                 gpmc,oe-off-ns = <40>;
 600                 gpmc,access-ns = <40>;
 601                 gpmc,wr-access-ns = <80>;
 602                 gpmc,rd-cycle-ns = <80>;
 603                 gpmc,wr-cycle-ns = <80>;
 604                 gpmc,bus-turnaround-ns = <0>;
 605                 gpmc,cycle2cycle-delay-ns = <0>;
 606                 gpmc,clk-activation-ns = <0>;
 607                 gpmc,wait-monitoring-ns = <0>;
 608                 gpmc,wr-data-mux-bus-ns = <0>;
 609                 /* MTD partition table */
 610                 /* All SPL-* partitions are sized to minimal length
 611                  * which can be independently programmable. For
 612                  * NAND flash this is equal to size of erase-block */
 613                 #address-cells = <1>;
 614                 #size-cells = <1>;
 615                 partition@0 {
 616                         label = "NAND.SPL";
 617                         reg = <0x00000000 0x000020000>;
 618                 };
 619                 partition@1 {
 620                         label = "NAND.SPL.backup1";
 621                         reg = <0x00020000 0x00020000>;
 622                 };
 623                 partition@2 {
 624                         label = "NAND.SPL.backup2";
 625                         reg = <0x00040000 0x00020000>;
 626                 };
 627                 partition@3 {
 628                         label = "NAND.SPL.backup3";
 629                         reg = <0x00060000 0x00020000>;
 630                 };
 631                 partition@4 {
 632                         label = "NAND.u-boot-spl-os";
 633                         reg = <0x00080000 0x00040000>;
 634                 };
 635                 partition@5 {
 636                         label = "NAND.u-boot";
 637                         reg = <0x000c0000 0x00100000>;
 638                 };
 639                 partition@6 {
 640                         label = "NAND.u-boot-env";
 641                         reg = <0x001c0000 0x00020000>;
 642                 };
 643                 partition@7 {
 644                         label = "NAND.u-boot-env.backup1";
 645                         reg = <0x001e0000 0x00020000>;
 646                 };
 647                 partition@8 {
 648                         label = "NAND.kernel";
 649                         reg = <0x00200000 0x00800000>;
 650                 };
 651                 partition@9 {
 652                         label = "NAND.file-system";
 653                         reg = <0x00a00000 0x0f600000>;
 654                 };
 655         };
 656 };
 657
 658 &usb2_phy1 {
 659         phy-supply = <&ldousb_reg>;
 660 };
 661
 662 &usb2_phy2 {
 663         phy-supply = <&ldousb_reg>;
 664 };
 665
 666 &gpio7 {
 667         ti,no-reset-on-init;
 668         ti,no-idle-on-init;
 669 };
 670
 671 &mac {
 672         status = "okay";
 673         pinctrl-names = "default", "sleep";
 674         pinctrl-0 = <&cpsw_default>;
 675         pinctrl-1 = <&cpsw_sleep>;
 676         dual_emac;
 677 };
 678
 679 &cpsw_emac0 {
 680         phy_id = <&davinci_mdio>, <2>;
 681         phy-mode = "rgmii";
 682         dual_emac_res_vlan = <1>;
 683 };
 684
 685 &cpsw_emac1 {
 686         phy_id = <&davinci_mdio>, <3>;
 687         phy-mode = "rgmii";
 688         dual_emac_res_vlan = <2>;
 689 };
 690
 691 &davinci_mdio {
 692         pinctrl-names = "default", "sleep";
 693         pinctrl-0 = <&davinci_mdio_default>;
 694         pinctrl-1 = <&davinci_mdio_sleep>;
 695 };
 696
 697 &dcan1 {
 698         status = "ok";
 699         pinctrl-names = "default", "sleep", "active";
 700         pinctrl-0 = <&dcan1_pins_sleep>;
 701         pinctrl-1 = <&dcan1_pins_sleep>;
 702         pinctrl-2 = <&dcan1_pins_default>;
 703 };