arch/arm/dts/at91sam9x5.dtsi

   1 /*
   2  * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
   3  *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
   4  *                   AT91SAM9X25, AT91SAM9X35 SoC
   5  *
   6  *  Copyright (C) 2012 Atmel,
   7  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
   8  *
   9  * Licensed under GPLv2 or later.
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include <dt-bindings/dma/at91.h>
  14 #include <dt-bindings/pinctrl/at91.h>
  15 #include <dt-bindings/interrupt-controller/irq.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/clock/at91.h>
  18
  19 / {
  20         model = "Atmel AT91SAM9x5 family SoC";
  21         compatible = "atmel,at91sam9x5";
  22         interrupt-parent = <&aic>;
  23
  24         aliases {
  25                 serial0 = &dbgu;
  26                 serial1 = &usart0;
  27                 serial2 = &usart1;
  28                 serial3 = &usart2;
  29                 gpio0 = &pioA;
  30                 gpio1 = &pioB;
  31                 gpio2 = &pioC;
  32                 gpio3 = &pioD;
  33                 tcb0 = &tcb0;
  34                 tcb1 = &tcb1;
  35                 i2c0 = &i2c0;
  36                 i2c1 = &i2c1;
  37                 i2c2 = &i2c2;
  38                 ssc0 = &ssc0;
  39                 pwm0 = &pwm0;
  40                 spi0 = &spi0;
  41         };
  42
  43         cpus {
  44                 cpu {
  45                         compatible = "arm,arm926ej-s";
  46                         device_type = "cpu";
  47                 };
  48         };
  49
  50         memory {
  51                 reg = <0x20000000 0x10000000>;
  52         };
  53
  54         clocks {
  55                 slow_xtal: slow_xtal {
  56                         compatible = "fixed-clock";
  57                         #clock-cells = <0>;
  58                         clock-frequency = <0>;
  59                 };
  60
  61                 main_xtal: main_xtal {
  62                         compatible = "fixed-clock";
  63                         #clock-cells = <0>;
  64                         clock-frequency = <0>;
  65                 };
  66
  67                 adc_op_clk: adc_op_clk{
  68                         compatible = "fixed-clock";
  69                         #clock-cells = <0>;
  70                         clock-frequency = <1000000>;
  71                 };
  72         };
  73
  74         sram: sram@00300000 {
  75                 compatible = "mmio-sram";
  76                 reg = <0x00300000 0x8000>;
  77         };
  78
  79         ahb {
  80                 compatible = "simple-bus";
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 ranges;
  84                 u-boot,dm-pre-reloc;
  85
  86                 apb {
  87                         compatible = "simple-bus";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90                         ranges;
  91                         u-boot,dm-pre-reloc;
  92
  93                         aic: interrupt-controller@fffff000 {
  94                                 #interrupt-cells = <3>;
  95                                 compatible = "atmel,at91rm9200-aic";
  96                                 interrupt-controller;
  97                                 reg = <0xfffff000 0x200>;
  98                                 atmel,external-irqs = <31>;
  99                         };
 100
 101                         ramc0: ramc@ffffe800 {
 102                                 compatible = "atmel,at91sam9g45-ddramc";
 103                                 reg = <0xffffe800 0x200>;
 104                                 clocks = <&ddrck>;
 105                                 clock-names = "ddrck";
 106                         };
 107
 108                         pmc: pmc@fffffc00 {
 109                                 compatible = "atmel,at91sam9x5-pmc", "syscon";
 110                                 reg = <0xfffffc00 0x200>;
 111                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 112                                 interrupt-controller;
 113                                 #address-cells = <1>;
 114                                 #size-cells = <0>;
 115                                 #interrupt-cells = <1>;
 116                                 u-boot,dm-pre-reloc;
 117
 118                                 main_rc_osc: main_rc_osc {
 119                                         compatible = "atmel,at91sam9x5-clk-main-rc-osc";
 120                                         #clock-cells = <0>;
 121                                         interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
 122                                         clock-frequency = <12000000>;
 123                                         clock-accuracy = <50000000>;
 124                                 };
 125
 126                                 main_osc: main_osc {
 127                                         compatible = "atmel,at91rm9200-clk-main-osc";
 128                                         #clock-cells = <0>;
 129                                         interrupts-extended = <&pmc AT91_PMC_MOSCS>;
 130                                         clocks = <&main_xtal>;
 131                                 };
 132
 133                                 main: mainck {
 134                                         compatible = "atmel,at91sam9x5-clk-main";
 135                                         #clock-cells = <0>;
 136                                         interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
 137                                         clocks = <&main_rc_osc>, <&main_osc>;
 138                                 };
 139
 140                                 plla: pllack@0 {
 141                                         compatible = "atmel,at91rm9200-clk-pll";
 142                                         #clock-cells = <0>;
 143                                         interrupts-extended = <&pmc AT91_PMC_LOCKA>;
 144                                         clocks = <&main>;
 145                                         reg = <0>;
 146                                         atmel,clk-input-range = <2000000 32000000>;
 147                                         #atmel,pll-clk-output-range-cells = <4>;
 148                                         atmel,pll-clk-output-ranges = <745000000 800000000 0 0
 149                                                                        695000000 750000000 1 0
 150                                                                        645000000 700000000 2 0
 151                                                                        595000000 650000000 3 0
 152                                                                        545000000 600000000 0 1
 153                                                                        495000000 555000000 1 1
 154                                                                        445000000 500000000 2 1
 155                                                                        400000000 450000000 3 1>;
 156                                 };
 157
 158                                 plladiv: plladivck {
 159                                         compatible = "atmel,at91sam9x5-clk-plldiv";
 160                                         #clock-cells = <0>;
 161                                         clocks = <&plla>;
 162                                 };
 163
 164                                 utmi: utmick {
 165                                         compatible = "atmel,at91sam9x5-clk-utmi";
 166                                         #clock-cells = <0>;
 167                                         interrupts-extended = <&pmc AT91_PMC_LOCKU>;
 168                                         clocks = <&main>;
 169                                 };
 170
 171                                 mck: masterck {
 172                                         compatible = "atmel,at91sam9x5-clk-master";
 173                                         #clock-cells = <0>;
 174                                         interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
 175                                         clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
 176                                         atmel,clk-output-range = <0 133333333>;
 177                                         atmel,clk-divisors = <1 2 4 3>;
 178                                         atmel,master-clk-have-div3-pres;
 179                                         u-boot,dm-pre-reloc;
 180
 181                                 };
 182
 183                                 usb: usbck {
 184                                         compatible = "atmel,at91sam9x5-clk-usb";
 185                                         #clock-cells = <0>;
 186                                         clocks = <&plladiv>, <&utmi>;
 187                                 };
 188
 189                                 prog: progck {
 190                                         compatible = "atmel,at91sam9x5-clk-programmable";
 191                                         #address-cells = <1>;
 192                                         #size-cells = <0>;
 193                                         interrupt-parent = <&pmc>;
 194                                         clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
 195
 196                                         prog0: prog@0 {
 197                                                 #clock-cells = <0>;
 198                                                 reg = <0>;
 199                                                 interrupts = <AT91_PMC_PCKRDY(0)>;
 200                                         };
 201
 202                                         prog1: prog@1 {
 203                                                 #clock-cells = <0>;
 204                                                 reg = <1>;
 205                                                 interrupts = <AT91_PMC_PCKRDY(1)>;
 206                                         };
 207                                 };
 208
 209                                 smd: smdclk {
 210                                         compatible = "atmel,at91sam9x5-clk-smd";
 211                                         #clock-cells = <0>;
 212                                         clocks = <&plladiv>, <&utmi>;
 213                                 };
 214
 215                                 systemck {
 216                                         compatible = "atmel,at91rm9200-clk-system";
 217                                         #address-cells = <1>;
 218                                         #size-cells = <0>;
 219
 220                                         ddrck: ddrck@2 {
 221                                                 #clock-cells = <0>;
 222                                                 reg = <2>;
 223                                                 clocks = <&mck>;
 224                                         };
 225
 226                                         smdck: smdck@4 {
 227                                                 #clock-cells = <0>;
 228                                                 reg = <4>;
 229                                                 clocks = <&smd>;
 230                                         };
 231
 232                                         uhpck: uhpck@6 {
 233                                                 #clock-cells = <0>;
 234                                                 reg = <6>;
 235                                                 clocks = <&usb>;
 236                                         };
 237
 238                                         udpck: udpck@7 {
 239                                                 #clock-cells = <0>;
 240                                                 reg = <7>;
 241                                                 clocks = <&usb>;
 242                                         };
 243
 244                                         pck0: pck0@8 {
 245                                                 #clock-cells = <0>;
 246                                                 reg = <8>;
 247                                                 clocks = <&prog0>;
 248                                         };
 249
 250                                         pck1: pck1@9 {
 251                                                 #clock-cells = <0>;
 252                                                 reg = <9>;
 253                                                 clocks = <&prog1>;
 254                                         };
 255                                 };
 256
 257                                 periphck {
 258                                         compatible = "atmel,at91sam9x5-clk-peripheral";
 259                                         #address-cells = <1>;
 260                                         #size-cells = <0>;
 261                                         clocks = <&mck>;
 262                                         u-boot,dm-pre-reloc;
 263
 264
 265                                         pioAB_clk: pioAB_clk@2 {
 266                                                 #clock-cells = <0>;
 267                                                 reg = <2>;
 268                                         };
 269
 270                                         pioCD_clk: pioCD_clk@3 {
 271                                                 #clock-cells = <0>;
 272                                                 reg = <3>;
 273                                         };
 274
 275                                         smd_clk: smd_clk@4 {
 276                                                 #clock-cells = <0>;
 277                                                 reg = <4>;
 278                                         };
 279
 280                                         usart0_clk: usart0_clk@5 {
 281                                                 #clock-cells = <0>;
 282                                                 reg = <5>;
 283                                         };
 284
 285                                         usart1_clk: usart1_clk@6 {
 286                                                 #clock-cells = <0>;
 287                                                 reg = <6>;
 288                                         };
 289
 290                                         usart2_clk: usart2_clk@7 {
 291                                                 #clock-cells = <0>;
 292                                                 reg = <7>;
 293                                         };
 294
 295                                         twi0_clk: twi0_clk@9 {
 296                                                 reg = <9>;
 297                                                 #clock-cells = <0>;
 298                                         };
 299
 300                                         twi1_clk: twi1_clk@10 {
 301                                                 #clock-cells = <0>;
 302                                                 reg = <10>;
 303                                         };
 304
 305                                         twi2_clk: twi2_clk@11 {
 306                                                 #clock-cells = <0>;
 307                                                 reg = <11>;
 308                                         };
 309
 310                                         mci0_clk: mci0_clk@12 {
 311                                                 #clock-cells = <0>;
 312                                                 reg = <12>;
 313                                         };
 314
 315                                         spi0_clk: spi0_clk@13 {
 316                                                 #clock-cells = <0>;
 317                                                 reg = <13>;
 318                                         };
 319
 320                                         spi1_clk: spi1_clk@14 {
 321                                                 #clock-cells = <0>;
 322                                                 reg = <14>;
 323                                         };
 324
 325                                         uart0_clk: uart0_clk@15 {
 326                                                 #clock-cells = <0>;
 327                                                 reg = <15>;
 328                                         };
 329
 330                                         uart1_clk: uart1_clk@16 {
 331                                                 #clock-cells = <0>;
 332                                                 reg = <16>;
 333                                         };
 334
 335                                         tcb0_clk: tcb0_clk@17 {
 336                                                 #clock-cells = <0>;
 337                                                 reg = <17>;
 338                                         };
 339
 340                                         pwm_clk: pwm_clk@18 {
 341                                                 #clock-cells = <0>;
 342                                                 reg = <18>;
 343                                         };
 344
 345                                         adc_clk: adc_clk@19 {
 346                                                 #clock-cells = <0>;
 347                                                 reg = <19>;
 348                                         };
 349
 350                                         dma0_clk: dma0_clk@20 {
 351                                                 #clock-cells = <0>;
 352                                                 reg = <20>;
 353                                         };
 354
 355                                         dma1_clk: dma1_clk@21 {
 356                                                 #clock-cells = <0>;
 357                                                 reg = <21>;
 358                                         };
 359
 360                                         uhphs_clk: uhphs_clk@22 {
 361                                                 #clock-cells = <0>;
 362                                                 reg = <22>;
 363                                         };
 364
 365                                         udphs_clk: udphs_clk@23 {
 366                                                 #clock-cells = <0>;
 367                                                 reg = <23>;
 368                                         };
 369
 370                                         mci1_clk: mci1_clk@26 {
 371                                                 #clock-cells = <0>;
 372                                                 reg = <26>;
 373                                         };
 374
 375                                         ssc0_clk: ssc0_clk@28 {
 376                                                 #clock-cells = <0>;
 377                                                 reg = <28>;
 378                                         };
 379                                 };
 380                         };
 381
 382                         rstc@fffffe00 {
 383                                 compatible = "atmel,at91sam9g45-rstc";
 384                                 reg = <0xfffffe00 0x10>;
 385                                 clocks = <&clk32k>;
 386                         };
 387
 388                         shdwc@fffffe10 {
 389                                 compatible = "atmel,at91sam9x5-shdwc";
 390                                 reg = <0xfffffe10 0x10>;
 391                                 clocks = <&clk32k>;
 392                         };
 393
 394                         pit: timer@fffffe30 {
 395                                 compatible = "atmel,at91sam9260-pit";
 396                                 reg = <0xfffffe30 0xf>;
 397                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 398                                 clocks = <&mck>;
 399                         };
 400
 401                         sckc@fffffe50 {
 402                                 compatible = "atmel,at91sam9x5-sckc";
 403                                 reg = <0xfffffe50 0x4>;
 404
 405                                 slow_osc: slow_osc {
 406                                         compatible = "atmel,at91sam9x5-clk-slow-osc";
 407                                         #clock-cells = <0>;
 408                                         clocks = <&slow_xtal>;
 409                                 };
 410
 411                                 slow_rc_osc: slow_rc_osc {
 412                                         compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
 413                                         #clock-cells = <0>;
 414                                         clock-frequency = <32768>;
 415                                         clock-accuracy = <50000000>;
 416                                 };
 417
 418                                 clk32k: slck {
 419                                         compatible = "atmel,at91sam9x5-clk-slow";
 420                                         #clock-cells = <0>;
 421                                         clocks = <&slow_rc_osc>, <&slow_osc>;
 422                                 };
 423                         };
 424
 425                         tcb0: timer@f8008000 {
 426                                 compatible = "atmel,at91sam9x5-tcb";
 427                                 reg = <0xf8008000 0x100>;
 428                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 429                                 clocks = <&tcb0_clk>, <&clk32k>;
 430                                 clock-names = "t0_clk", "slow_clk";
 431                         };
 432
 433                         tcb1: timer@f800c000 {
 434                                 compatible = "atmel,at91sam9x5-tcb";
 435                                 reg = <0xf800c000 0x100>;
 436                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 437                                 clocks = <&tcb0_clk>, <&clk32k>;
 438                                 clock-names = "t0_clk", "slow_clk";
 439                         };
 440
 441                         dma0: dma-controller@ffffec00 {
 442                                 compatible = "atmel,at91sam9g45-dma";
 443                                 reg = <0xffffec00 0x200>;
 444                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 445                                 #dma-cells = <2>;
 446                                 clocks = <&dma0_clk>;
 447                                 clock-names = "dma_clk";
 448                         };
 449
 450                         dma1: dma-controller@ffffee00 {
 451                                 compatible = "atmel,at91sam9g45-dma";
 452                                 reg = <0xffffee00 0x200>;
 453                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 454                                 #dma-cells = <2>;
 455                                 clocks = <&dma1_clk>;
 456                                 clock-names = "dma_clk";
 457                         };
 458
 459                         pinctrl@fffff400 {
 460                                 #address-cells = <1>;
 461                                 #size-cells = <1>;
 462                                 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 463                                 ranges = <0xfffff400 0xfffff400 0x800>;
 464                                 reg = <0xfffff400 0x200         /* pioA */
 465                                        0xfffff600 0x200         /* pioB */
 466                                        0xfffff800 0x200         /* pioC */
 467                                        0xfffffa00 0x200         /* pioD */
 468                                        >;
 469                                 u-boot,dm-pre-reloc;
 470
 471
 472                                 /* shared pinctrl settings */
 473                                 dbgu {
 474                                         u-boot,dm-pre-reloc;
 475                                         pinctrl_dbgu: dbgu-0 {
 476                                                 atmel,pins =
 477                                                         <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 478                                                          AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 479                                         };
 480                                 };
 481
 482                                 usart0 {
 483                                         pinctrl_usart0: usart0-0 {
 484                                                 atmel,pins =
 485                                                         <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */
 486                                                          AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA1 periph A */
 487                                         };
 488
 489                                         pinctrl_usart0_rts: usart0_rts-0 {
 490                                                 atmel,pins =
 491                                                         <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA2 periph A */
 492                                         };
 493
 494                                         pinctrl_usart0_cts: usart0_cts-0 {
 495                                                 atmel,pins =
 496                                                         <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA3 periph A */
 497                                         };
 498
 499                                         pinctrl_usart0_sck: usart0_sck-0 {
 500                                                 atmel,pins =
 501                                                         <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA4 periph A */
 502                                         };
 503                                 };
 504
 505                                 usart1 {
 506                                         pinctrl_usart1: usart1-0 {
 507                                                 atmel,pins =
 508                                                         <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */
 509                                                          AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA6 periph A */
 510                                         };
 511
 512                                         pinctrl_usart1_rts: usart1_rts-0 {
 513                                                 atmel,pins =
 514                                                         <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */
 515                                         };
 516
 517                                         pinctrl_usart1_cts: usart1_cts-0 {
 518                                                 atmel,pins =
 519                                                         <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */
 520                                         };
 521
 522                                         pinctrl_usart1_sck: usart1_sck-0 {
 523                                                 atmel,pins =
 524                                                         <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
 525                                         };
 526                                 };
 527
 528                                 usart2 {
 529                                         pinctrl_usart2: usart2-0 {
 530                                                 atmel,pins =
 531                                                         <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
 532                                                          AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA8 periph A */
 533                                         };
 534
 535                                         pinctrl_usart2_rts: usart2_rts-0 {
 536                                                 atmel,pins =
 537                                                         <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB0 periph B */
 538                                         };
 539
 540                                         pinctrl_usart2_cts: usart2_cts-0 {
 541                                                 atmel,pins =
 542                                                         <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB1 periph B */
 543                                         };
 544
 545                                         pinctrl_usart2_sck: usart2_sck-0 {
 546                                                 atmel,pins =
 547                                                         <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB2 periph B */
 548                                         };
 549                                 };
 550
 551                                 uart0 {
 552                                         pinctrl_uart0: uart0-0 {
 553                                                 atmel,pins =
 554                                                         <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC8 periph C */
 555                                                          AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;       /* PC9 periph C with pullup */
 556                                         };
 557                                 };
 558
 559                                 uart1 {
 560                                         pinctrl_uart1: uart1-0 {
 561                                                 atmel,pins =
 562                                                         <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC16 periph C */
 563                                                          AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;      /* PC17 periph C with pullup */
 564                                         };
 565                                 };
 566
 567                                 nand {
 568                                         pinctrl_nand: nand-0 {
 569                                                 atmel,pins =
 570                                                         <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD0 periph A Read Enable */
 571                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD1 periph A Write Enable */
 572                                                          AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD2 periph A Address Latch Enable */
 573                                                          AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD3 periph A Command Latch Enable */
 574                                                          AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PD4 gpio Chip Enable pin pull_up */
 575                                                          AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PD5 gpio RDY/BUSY pin pull_up */
 576                                                          AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD6 periph A Data bit 0 */
 577                                                          AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD7 periph A Data bit 1 */
 578                                                          AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD8 periph A Data bit 2 */
 579                                                          AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD9 periph A Data bit 3 */
 580                                                          AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD10 periph A Data bit 4 */
 581                                                          AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD11 periph A Data bit 5 */
 582                                                          AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD12 periph A Data bit 6 */
 583                                                          AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */
 584                                         };
 585
 586                                         pinctrl_nand_16bits: nand_16bits-0 {
 587                                                 atmel,pins =
 588                                                         <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD14 periph A Data bit 8 */
 589                                                          AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD15 periph A Data bit 9 */
 590                                                          AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD16 periph A Data bit 10 */
 591                                                          AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD17 periph A Data bit 11 */
 592                                                          AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD18 periph A Data bit 12 */
 593                                                          AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD19 periph A Data bit 13 */
 594                                                          AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD20 periph A Data bit 14 */
 595                                                          AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */
 596                                         };
 597                                 };
 598
 599                                 mmc0 {
 600                                         pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 601                                                 atmel,pins =
 602                                                         <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
 603                                                          AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA16 periph A with pullup */
 604                                                          AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA15 periph A with pullup */
 605                                         };
 606
 607                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 608                                                 atmel,pins =
 609                                                         <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA18 periph A with pullup */
 610                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA19 periph A with pullup */
 611                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA20 periph A with pullup */
 612                                         };
 613                                 };
 614
 615                                 mmc1 {
 616                                         pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
 617                                                 atmel,pins =
 618                                                         <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA13 periph B */
 619                                                          AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PA12 periph B with pullup */
 620                                                          AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* PA11 periph B with pullup */
 621                                         };
 622
 623                                         pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
 624                                                 atmel,pins =
 625                                                         <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */
 626                                                          AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */
 627                                                          AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA4 periph B with pullup */
 628                                         };
 629                                 };
 630
 631                                 ssc0 {
 632                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 633                                                 atmel,pins =
 634                                                         <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA24 periph B */
 635                                                          AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
 636                                                          AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */
 637                                         };
 638
 639                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 640                                                 atmel,pins =
 641                                                         <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 642                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 643                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
 644                                         };
 645                                 };
 646
 647                                 spi0 {
 648                                         pinctrl_spi0: spi0-0 {
 649                                                 atmel,pins =
 650                                                         <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA11 periph A SPI0_MISO pin */
 651                                                          AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A SPI0_MOSI pin */
 652                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */
 653                                         };
 654                                 };
 655
 656                                 spi1 {
 657                                         pinctrl_spi1: spi1-0 {
 658                                                 atmel,pins =
 659                                                         <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA21 periph B SPI1_MISO pin */
 660                                                          AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B SPI1_MOSI pin */
 661                                                          AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */
 662                                         };
 663                                 };
 664
 665                                 i2c0 {
 666                                         pinctrl_i2c0: i2c0-0 {
 667                                                 atmel,pins =
 668                                                         <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA30 periph A I2C0 data */
 669                                                          AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */
 670                                         };
 671                                 };
 672
 673                                 i2c1 {
 674                                         pinctrl_i2c1: i2c1-0 {
 675                                                 atmel,pins =
 676                                                         <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC0 periph C I2C1 data */
 677                                                          AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* PC1 periph C I2C1 clock */
 678                                         };
 679                                 };
 680
 681                                 i2c2 {
 682                                         pinctrl_i2c2: i2c2-0 {
 683                                                 atmel,pins =
 684                                                         <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB4 periph B I2C2 data */
 685                                                          AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB5 periph B I2C2 clock */
 686                                         };
 687                                 };
 688
 689                                 i2c_gpio0 {
 690                                         pinctrl_i2c_gpio0: i2c_gpio0-0 {
 691                                                 atmel,pins =
 692                                                         <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */
 693                                                          AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;       /* PA31 gpio multidrive I2C0 clock */
 694                                         };
 695                                 };
 696
 697                                 i2c_gpio1 {
 698                                         pinctrl_i2c_gpio1: i2c_gpio1-0 {
 699                                                 atmel,pins =
 700                                                         <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PC0 gpio multidrive I2C1 data */
 701                                                          AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PC1 gpio multidrive I2C1 clock */
 702                                         };
 703                                 };
 704
 705                                 i2c_gpio2 {
 706                                         pinctrl_i2c_gpio2: i2c_gpio2-0 {
 707                                                 atmel,pins =
 708                                                         <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PB4 gpio multidrive I2C2 data */
 709                                                          AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PB5 gpio multidrive I2C2 clock */
 710                                         };
 711                                 };
 712
 713                                 pwm0 {
 714                                         pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
 715                                                 atmel,pins =
 716                                                         <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 717                                         };
 718                                         pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
 719                                                 atmel,pins =
 720                                                         <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 721                                         };
 722                                         pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
 723                                                 atmel,pins =
 724                                                         <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 725                                         };
 726
 727                                         pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
 728                                                 atmel,pins =
 729                                                         <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 730                                         };
 731                                         pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
 732                                                 atmel,pins =
 733                                                         <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 734                                         };
 735                                         pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
 736                                                 atmel,pins =
 737                                                         <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 738                                         };
 739
 740                                         pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
 741                                                 atmel,pins =
 742                                                         <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 743                                         };
 744                                         pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
 745                                                 atmel,pins =
 746                                                         <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 747                                         };
 748
 749                                         pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
 750                                                 atmel,pins =
 751                                                         <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 752                                         };
 753                                         pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
 754                                                 atmel,pins =
 755                                                         <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 756                                         };
 757                                 };
 758
 759                                 tcb0 {
 760                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 761                                                 atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 762                                         };
 763
 764                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
 765                                                 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 766                                         };
 767
 768                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
 769                                                 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 770                                         };
 771
 772                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
 773                                                 atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 774                                         };
 775
 776                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
 777                                                 atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 778                                         };
 779
 780                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
 781                                                 atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 782                                         };
 783
 784                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
 785                                                 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 786                                         };
 787
 788                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
 789                                                 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 790                                         };
 791
 792                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 793                                                 atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 794                                         };
 795                                 };
 796
 797                                 tcb1 {
 798                                         pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
 799                                                 atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 800                                         };
 801
 802                                         pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
 803                                                 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 804                                         };
 805
 806                                         pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
 807                                                 atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 808                                         };
 809
 810                                         pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
 811                                                 atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 812                                         };
 813
 814                                         pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
 815                                                 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 816                                         };
 817
 818                                         pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
 819                                                 atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 820                                         };
 821
 822                                         pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
 823                                                 atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 824                                         };
 825
 826                                         pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
 827                                                 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 828                                         };
 829
 830                                         pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
 831                                                 atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 832                                         };
 833                                 };
 834                         };
 835
 836                         pioA: gpio@fffff400 {
 837                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 838                                 reg = <0xfffff400 0x200>;
 839                                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 840                                 #gpio-cells = <2>;
 841                                 gpio-controller;
 842                                 interrupt-controller;
 843                                 #interrupt-cells = <2>;
 844                                 clocks = <&pioAB_clk>;
 845                         };
 846
 847                         pioB: gpio@fffff600 {
 848                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 849                                 reg = <0xfffff600 0x200>;
 850                                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 851                                 #gpio-cells = <2>;
 852                                 gpio-controller;
 853                                 #gpio-lines = <19>;
 854                                 interrupt-controller;
 855                                 #interrupt-cells = <2>;
 856                                 clocks = <&pioAB_clk>;
 857                         };
 858
 859                         pioC: gpio@fffff800 {
 860                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 861                                 reg = <0xfffff800 0x200>;
 862                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 863                                 #gpio-cells = <2>;
 864                                 gpio-controller;
 865                                 interrupt-controller;
 866                                 #interrupt-cells = <2>;
 867                                 clocks = <&pioCD_clk>;
 868                         };
 869
 870                         pioD: gpio@fffffa00 {
 871                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 872                                 reg = <0xfffffa00 0x200>;
 873                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 874                                 #gpio-cells = <2>;
 875                                 gpio-controller;
 876                                 #gpio-lines = <22>;
 877                                 interrupt-controller;
 878                                 #interrupt-cells = <2>;
 879                                 clocks = <&pioCD_clk>;
 880                         };
 881
 882                         ssc0: ssc@f0010000 {
 883                                 compatible = "atmel,at91sam9g45-ssc";
 884                                 reg = <0xf0010000 0x4000>;
 885                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 886                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
 887                                        <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
 888                                 dma-names = "tx", "rx";
 889                                 pinctrl-names = "default";
 890                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 891                                 clocks = <&ssc0_clk>;
 892                                 clock-names = "pclk";
 893                                 status = "disabled";
 894                         };
 895
 896                         mmc0: mmc@f0008000 {
 897                                 compatible = "atmel,hsmci";
 898                                 reg = <0xf0008000 0x600>;
 899                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 900                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 901                                 dma-names = "rxtx";
 902                                 pinctrl-names = "default";
 903                                 clocks = <&mci0_clk>;
 904                                 clock-names = "mci_clk";
 905                                 #address-cells = <1>;
 906                                 #size-cells = <0>;
 907                                 status = "disabled";
 908                         };
 909
 910                         mmc1: mmc@f000c000 {
 911                                 compatible = "atmel,hsmci";
 912                                 reg = <0xf000c000 0x600>;
 913                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 914                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 915                                 dma-names = "rxtx";
 916                                 pinctrl-names = "default";
 917                                 clocks = <&mci1_clk>;
 918                                 clock-names = "mci_clk";
 919                                 #address-cells = <1>;
 920                                 #size-cells = <0>;
 921                                 status = "disabled";
 922                         };
 923
 924                         dbgu: serial@fffff200 {
 925                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 926                                 reg = <0xfffff200 0x200>;
 927                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 928                                 pinctrl-names = "default";
 929                                 pinctrl-0 = <&pinctrl_dbgu>;
 930                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
 931                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 932                                 dma-names = "tx", "rx";
 933                                 clocks = <&mck>;
 934                                 clock-names = "usart";
 935                                 status = "disabled";
 936                         };
 937
 938                         usart0: serial@f801c000 {
 939                                 compatible = "atmel,at91sam9260-usart";
 940                                 reg = <0xf801c000 0x200>;
 941                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 942                                 pinctrl-names = "default";
 943                                 pinctrl-0 = <&pinctrl_usart0>;
 944                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
 945                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 946                                 dma-names = "tx", "rx";
 947                                 clocks = <&usart0_clk>;
 948                                 clock-names = "usart";
 949                                 status = "disabled";
 950                         };
 951
 952                         usart1: serial@f8020000 {
 953                                 compatible = "atmel,at91sam9260-usart";
 954                                 reg = <0xf8020000 0x200>;
 955                                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 956                                 pinctrl-names = "default";
 957                                 pinctrl-0 = <&pinctrl_usart1>;
 958                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
 959                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 960                                 dma-names = "tx", "rx";
 961                                 clocks = <&usart1_clk>;
 962                                 clock-names = "usart";
 963                                 status = "disabled";
 964                         };
 965
 966                         usart2: serial@f8024000 {
 967                                 compatible = "atmel,at91sam9260-usart";
 968                                 reg = <0xf8024000 0x200>;
 969                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 970                                 pinctrl-names = "default";
 971                                 pinctrl-0 = <&pinctrl_usart2>;
 972                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
 973                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 974                                 dma-names = "tx", "rx";
 975                                 clocks = <&usart2_clk>;
 976                                 clock-names = "usart";
 977                                 status = "disabled";
 978                         };
 979
 980                         i2c0: i2c@f8010000 {
 981                                 compatible = "atmel,at91sam9x5-i2c";
 982                                 reg = <0xf8010000 0x100>;
 983                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
 984                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
 985                                        <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
 986                                 dma-names = "tx", "rx";
 987                                 #address-cells = <1>;
 988                                 #size-cells = <0>;
 989                                 pinctrl-names = "default";
 990                                 pinctrl-0 = <&pinctrl_i2c0>;
 991                                 clocks = <&twi0_clk>;
 992                                 status = "disabled";
 993                         };
 994
 995                         i2c1: i2c@f8014000 {
 996                                 compatible = "atmel,at91sam9x5-i2c";
 997                                 reg = <0xf8014000 0x100>;
 998                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
 999                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
1000                                        <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
1001                                 dma-names = "tx", "rx";
1002                                 #address-cells = <1>;
1003                                 #size-cells = <0>;
1004                                 pinctrl-names = "default";
1005                                 pinctrl-0 = <&pinctrl_i2c1>;
1006                                 clocks = <&twi1_clk>;
1007                                 status = "disabled";
1008                         };
1009
1010                         i2c2: i2c@f8018000 {
1011                                 compatible = "atmel,at91sam9x5-i2c";
1012                                 reg = <0xf8018000 0x100>;
1013                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
1014                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
1015                                        <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
1016                                 dma-names = "tx", "rx";
1017                                 #address-cells = <1>;
1018                                 #size-cells = <0>;
1019                                 pinctrl-names = "default";
1020                                 pinctrl-0 = <&pinctrl_i2c2>;
1021                                 clocks = <&twi2_clk>;
1022                                 status = "disabled";
1023                         };
1024
1025                         uart0: serial@f8040000 {
1026                                 compatible = "atmel,at91sam9260-usart";
1027                                 reg = <0xf8040000 0x200>;
1028                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
1029                                 pinctrl-names = "default";
1030                                 pinctrl-0 = <&pinctrl_uart0>;
1031                                 clocks = <&uart0_clk>;
1032                                 clock-names = "usart";
1033                                 status = "disabled";
1034                         };
1035
1036                         uart1: serial@f8044000 {
1037                                 compatible = "atmel,at91sam9260-usart";
1038                                 reg = <0xf8044000 0x200>;
1039                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
1040                                 pinctrl-names = "default";
1041                                 pinctrl-0 = <&pinctrl_uart1>;
1042                                 clocks = <&uart1_clk>;
1043                                 clock-names = "usart";
1044                                 status = "disabled";
1045                         };
1046
1047                         adc0: adc@f804c000 {
1048                                 compatible = "atmel,at91sam9x5-adc";
1049                                 reg = <0xf804c000 0x100>;
1050                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
1051                                 clocks = <&adc_clk>,
1052                                          <&adc_op_clk>;
1053                                 clock-names = "adc_clk", "adc_op_clk";
1054                                 atmel,adc-use-external-triggers;
1055                                 atmel,adc-channels-used = <0xffff>;
1056                                 atmel,adc-vref = <3300>;
1057                                 atmel,adc-startup-time = <40>;
1058                                 atmel,adc-sample-hold-time = <11>;
1059                                 atmel,adc-res = <8 10>;
1060                                 atmel,adc-res-names = "lowres", "highres";
1061                                 atmel,adc-use-res = "highres";
1062
1063                                 trigger0 {
1064                                         trigger-name = "external-rising";
1065                                         trigger-value = <0x1>;
1066                                         trigger-external;
1067                                 };
1068
1069                                 trigger1 {
1070                                         trigger-name = "external-falling";
1071                                         trigger-value = <0x2>;
1072                                         trigger-external;
1073                                 };
1074
1075                                 trigger2 {
1076                                         trigger-name = "external-any";
1077                                         trigger-value = <0x3>;
1078                                         trigger-external;
1079                                 };
1080
1081                                 trigger3 {
1082                                         trigger-name = "continuous";
1083                                         trigger-value = <0x6>;
1084                                 };
1085                         };
1086
1087                         spi0: spi@f0000000 {
1088                                 #address-cells = <1>;
1089                                 #size-cells = <0>;
1090                                 compatible = "atmel,at91rm9200-spi";
1091                                 reg = <0xf0000000 0x100>;
1092                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
1093                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
1094                                        <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
1095                                 dma-names = "tx", "rx";
1096                                 pinctrl-names = "default";
1097                                 pinctrl-0 = <&pinctrl_spi0>;
1098                                 clocks = <&spi0_clk>;
1099                                 clock-names = "spi_clk";
1100                                 status = "disabled";
1101                         };
1102
1103                         spi1: spi@f0004000 {
1104                                 #address-cells = <1>;
1105                                 #size-cells = <0>;
1106                                 compatible = "atmel,at91rm9200-spi";
1107                                 reg = <0xf0004000 0x100>;
1108                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
1109                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
1110                                        <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
1111                                 dma-names = "tx", "rx";
1112                                 pinctrl-names = "default";
1113                                 pinctrl-0 = <&pinctrl_spi1>;
1114                                 clocks = <&spi1_clk>;
1115                                 clock-names = "spi_clk";
1116                                 status = "disabled";
1117                         };
1118
1119                         usb2: gadget@f803c000 {
1120                                 #address-cells = <1>;
1121                                 #size-cells = <0>;
1122                                 compatible = "atmel,at91sam9g45-udc";
1123                                 reg = <0x00500000 0x80000
1124                                        0xf803c000 0x400>;
1125                                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
1126                                 clocks = <&utmi>, <&udphs_clk>;
1127                                 clock-names = "hclk", "pclk";
1128                                 status = "disabled";
1129
1130                                 ep@0 {
1131                                         reg = <0>;
1132                                         atmel,fifo-size = <64>;
1133                                         atmel,nb-banks = <1>;
1134                                 };
1135
1136                                 ep@1 {
1137                                         reg = <1>;
1138                                         atmel,fifo-size = <1024>;
1139                                         atmel,nb-banks = <2>;
1140                                         atmel,can-dma;
1141                                         atmel,can-isoc;
1142                                 };
1143
1144                                 ep@2 {
1145                                         reg = <2>;
1146                                         atmel,fifo-size = <1024>;
1147                                         atmel,nb-banks = <2>;
1148                                         atmel,can-dma;
1149                                         atmel,can-isoc;
1150                                 };
1151
1152                                 ep@3 {
1153                                         reg = <3>;
1154                                         atmel,fifo-size = <1024>;
1155                                         atmel,nb-banks = <3>;
1156                                         atmel,can-dma;
1157                                 };
1158
1159                                 ep@4 {
1160                                         reg = <4>;
1161                                         atmel,fifo-size = <1024>;
1162                                         atmel,nb-banks = <3>;
1163                                         atmel,can-dma;
1164                                 };
1165
1166                                 ep@5 {
1167                                         reg = <5>;
1168                                         atmel,fifo-size = <1024>;
1169                                         atmel,nb-banks = <3>;
1170                                         atmel,can-dma;
1171                                         atmel,can-isoc;
1172                                 };
1173
1174                                 ep@6 {
1175                                         reg = <6>;
1176                                         atmel,fifo-size = <1024>;
1177                                         atmel,nb-banks = <3>;
1178                                         atmel,can-dma;
1179                                         atmel,can-isoc;
1180                                 };
1181                         };
1182
1183                         watchdog: watchdog@fffffe40 {
1184                                 compatible = "atmel,at91sam9260-wdt";
1185                                 reg = <0xfffffe40 0x10>;
1186                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1187                                 clocks = <&clk32k>;
1188                                 atmel,watchdog-type = "hardware";
1189                                 atmel,reset-type = "all";
1190                                 atmel,dbg-halt;
1191                                 status = "disabled";
1192                         };
1193
1194                         rtc@fffffeb0 {
1195                                 compatible = "atmel,at91sam9x5-rtc";
1196                                 reg = <0xfffffeb0 0x40>;
1197                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1198                                 clocks = <&clk32k>;
1199                                 status = "disabled";
1200                         };
1201
1202                         pwm0: pwm@f8034000 {
1203                                 compatible = "atmel,at91sam9rl-pwm";
1204                                 reg = <0xf8034000 0x300>;
1205                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
1206                                 clocks = <&pwm_clk>;
1207                                 #pwm-cells = <3>;
1208                                 status = "disabled";
1209                         };
1210                 };
1211
1212                 nand0: nand@40000000 {
1213                         compatible = "atmel,at91rm9200-nand";
1214                         #address-cells = <1>;
1215                         #size-cells = <1>;
1216                         reg = <0x40000000 0x10000000
1217                                0xffffe000 0x600         /* PMECC Registers */
1218                                0xffffe600 0x200         /* PMECC Error Location Registers */
1219                                0x00108000 0x18000       /* PMECC looup table in ROM code  */
1220                               >;
1221                         atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
1222                         atmel,nand-addr-offset = <21>;
1223                         atmel,nand-cmd-offset = <22>;
1224                         atmel,nand-has-dma;
1225                         pinctrl-names = "default";
1226                         pinctrl-0 = <&pinctrl_nand>;
1227                         gpios = <&pioD 5 GPIO_ACTIVE_HIGH
1228                                  &pioD 4 GPIO_ACTIVE_HIGH
1229                                  0
1230                                 >;
1231                         status = "disabled";
1232                 };
1233
1234                 usb0: ohci@00600000 {
1235                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1236                         reg = <0x00600000 0x100000>;
1237                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
1238                         clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
1239                         clock-names = "ohci_clk", "hclk", "uhpck";
1240                         status = "disabled";
1241                 };
1242
1243                 usb1: ehci@00700000 {
1244                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
1245                         reg = <0x00700000 0x100000>;
1246                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
1247                         clocks = <&utmi>, <&uhphs_clk>;
1248                         clock-names = "usb_clk", "ehci_clk";
1249                         status = "disabled";
1250                 };
1251         };
1252
1253         i2c-gpio-0 {
1254                 compatible = "i2c-gpio";
1255                 gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
1256                          &pioA 31 GPIO_ACTIVE_HIGH /* scl */
1257                         >;
1258                 i2c-gpio,sda-open-drain;
1259                 i2c-gpio,scl-open-drain;
1260                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1261                 #address-cells = <1>;
1262                 #size-cells = <0>;
1263                 pinctrl-names = "default";
1264                 pinctrl-0 = <&pinctrl_i2c_gpio0>;
1265                 status = "disabled";
1266         };
1267
1268         i2c-gpio-1 {
1269                 compatible = "i2c-gpio";
1270                 gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
1271                          &pioC 1 GPIO_ACTIVE_HIGH /* scl */
1272                         >;
1273                 i2c-gpio,sda-open-drain;
1274                 i2c-gpio,scl-open-drain;
1275                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1276                 #address-cells = <1>;
1277                 #size-cells = <0>;
1278                 pinctrl-names = "default";
1279                 pinctrl-0 = <&pinctrl_i2c_gpio1>;
1280                 status = "disabled";
1281         };
1282
1283         i2c-gpio-2 {
1284                 compatible = "i2c-gpio";
1285                 gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
1286                          &pioB 5 GPIO_ACTIVE_HIGH /* scl */
1287                         >;
1288                 i2c-gpio,sda-open-drain;
1289                 i2c-gpio,scl-open-drain;
1290                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1291                 #address-cells = <1>;
1292                 #size-cells = <0>;
1293                 pinctrl-names = "default";
1294                 pinctrl-0 = <&pinctrl_i2c_gpio2>;
1295                 status = "disabled";
1296         };
1297 };