arch/arm/dts/at91sam9x5.dtsi

   1 /*
   2  * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
   3  *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
   4  *                   AT91SAM9X25, AT91SAM9X35 SoC
   5  *
   6  *  Copyright (C) 2012 Atmel,
   7  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
   8  *
   9  * Licensed under GPLv2 or later.
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include <dt-bindings/dma/at91.h>
  14 #include <dt-bindings/pinctrl/at91.h>
  15 #include <dt-bindings/interrupt-controller/irq.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/clock/at91.h>
  18
  19 / {
  20         model = "Atmel AT91SAM9x5 family SoC";
  21         compatible = "atmel,at91sam9x5";
  22         interrupt-parent = <&aic>;
  23
  24         aliases {
  25                 serial0 = &dbgu;
  26                 serial1 = &usart0;
  27                 serial2 = &usart1;
  28                 serial3 = &usart2;
  29                 gpio0 = &pioA;
  30                 gpio1 = &pioB;
  31                 gpio2 = &pioC;
  32                 gpio3 = &pioD;
  33                 tcb0 = &tcb0;
  34                 tcb1 = &tcb1;
  35                 i2c0 = &i2c0;
  36                 i2c1 = &i2c1;
  37                 i2c2 = &i2c2;
  38                 ssc0 = &ssc0;
  39                 pwm0 = &pwm0;
  40                 spi0 = &spi0;
  41         };
  42
  43         cpus {
  44                 #address-cells = <0>;
  45                 #size-cells = <0>;
  46
  47                 cpu {
  48                         compatible = "arm,arm926ej-s";
  49                         device_type = "cpu";
  50                 };
  51         };
  52
  53         memory {
  54                 reg = <0x20000000 0x10000000>;
  55         };
  56
  57         clocks {
  58                 slow_xtal: slow_xtal {
  59                         compatible = "fixed-clock";
  60                         #clock-cells = <0>;
  61                         clock-frequency = <0>;
  62                 };
  63
  64                 main_xtal: main_xtal {
  65                         compatible = "fixed-clock";
  66                         #clock-cells = <0>;
  67                         clock-frequency = <0>;
  68                 };
  69
  70                 adc_op_clk: adc_op_clk{
  71                         compatible = "fixed-clock";
  72                         #clock-cells = <0>;
  73                         clock-frequency = <1000000>;
  74                 };
  75         };
  76
  77         sram: sram@00300000 {
  78                 compatible = "mmio-sram";
  79                 reg = <0x00300000 0x8000>;
  80         };
  81
  82         ahb {
  83                 compatible = "simple-bus";
  84                 #address-cells = <1>;
  85                 #size-cells = <1>;
  86                 ranges;
  87                 u-boot,dm-pre-reloc;
  88
  89                 apb {
  90                         compatible = "simple-bus";
  91                         #address-cells = <1>;
  92                         #size-cells = <1>;
  93                         ranges;
  94                         u-boot,dm-pre-reloc;
  95
  96                         aic: interrupt-controller@fffff000 {
  97                                 #interrupt-cells = <3>;
  98                                 compatible = "atmel,at91rm9200-aic";
  99                                 interrupt-controller;
 100                                 reg = <0xfffff000 0x200>;
 101                                 atmel,external-irqs = <31>;
 102                         };
 103
 104                         ramc0: ramc@ffffe800 {
 105                                 compatible = "atmel,at91sam9g45-ddramc";
 106                                 reg = <0xffffe800 0x200>;
 107                                 clocks = <&ddrck>;
 108                                 clock-names = "ddrck";
 109                         };
 110
 111                         pmc: pmc@fffffc00 {
 112                                 compatible = "atmel,at91sam9x5-pmc", "syscon";
 113                                 reg = <0xfffffc00 0x200>;
 114                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 115                                 interrupt-controller;
 116                                 #address-cells = <1>;
 117                                 #size-cells = <0>;
 118                                 #interrupt-cells = <1>;
 119                                 u-boot,dm-pre-reloc;
 120
 121                                 main_rc_osc: main_rc_osc {
 122                                         compatible = "atmel,at91sam9x5-clk-main-rc-osc";
 123                                         #clock-cells = <0>;
 124                                         interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
 125                                         clock-frequency = <12000000>;
 126                                         clock-accuracy = <50000000>;
 127                                 };
 128
 129                                 main_osc: main_osc {
 130                                         compatible = "atmel,at91rm9200-clk-main-osc";
 131                                         #clock-cells = <0>;
 132                                         interrupts-extended = <&pmc AT91_PMC_MOSCS>;
 133                                         clocks = <&main_xtal>;
 134                                 };
 135
 136                                 main: mainck {
 137                                         compatible = "atmel,at91sam9x5-clk-main";
 138                                         #clock-cells = <0>;
 139                                         interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
 140                                         clocks = <&main_rc_osc>, <&main_osc>;
 141                                 };
 142
 143                                 plla: pllack@0 {
 144                                         compatible = "atmel,at91rm9200-clk-pll";
 145                                         #clock-cells = <0>;
 146                                         interrupts-extended = <&pmc AT91_PMC_LOCKA>;
 147                                         clocks = <&main>;
 148                                         reg = <0>;
 149                                         atmel,clk-input-range = <2000000 32000000>;
 150                                         #atmel,pll-clk-output-range-cells = <4>;
 151                                         atmel,pll-clk-output-ranges = <745000000 800000000 0 0
 152                                                                        695000000 750000000 1 0
 153                                                                        645000000 700000000 2 0
 154                                                                        595000000 650000000 3 0
 155                                                                        545000000 600000000 0 1
 156                                                                        495000000 555000000 1 1
 157                                                                        445000000 500000000 2 1
 158                                                                        400000000 450000000 3 1>;
 159                                 };
 160
 161                                 plladiv: plladivck {
 162                                         compatible = "atmel,at91sam9x5-clk-plldiv";
 163                                         #clock-cells = <0>;
 164                                         clocks = <&plla>;
 165                                 };
 166
 167                                 utmi: utmick {
 168                                         compatible = "atmel,at91sam9x5-clk-utmi";
 169                                         #clock-cells = <0>;
 170                                         interrupts-extended = <&pmc AT91_PMC_LOCKU>;
 171                                         clocks = <&main>;
 172                                 };
 173
 174                                 mck: masterck {
 175                                         compatible = "atmel,at91sam9x5-clk-master";
 176                                         #clock-cells = <0>;
 177                                         interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
 178                                         clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
 179                                         atmel,clk-output-range = <0 133333333>;
 180                                         atmel,clk-divisors = <1 2 4 3>;
 181                                         atmel,master-clk-have-div3-pres;
 182                                         u-boot,dm-pre-reloc;
 183
 184                                 };
 185
 186                                 usb: usbck {
 187                                         compatible = "atmel,at91sam9x5-clk-usb";
 188                                         #clock-cells = <0>;
 189                                         clocks = <&plladiv>, <&utmi>;
 190                                 };
 191
 192                                 prog: progck {
 193                                         compatible = "atmel,at91sam9x5-clk-programmable";
 194                                         #address-cells = <1>;
 195                                         #size-cells = <0>;
 196                                         interrupt-parent = <&pmc>;
 197                                         clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
 198
 199                                         prog0: prog@0 {
 200                                                 #clock-cells = <0>;
 201                                                 reg = <0>;
 202                                                 interrupts = <AT91_PMC_PCKRDY(0)>;
 203                                         };
 204
 205                                         prog1: prog@1 {
 206                                                 #clock-cells = <0>;
 207                                                 reg = <1>;
 208                                                 interrupts = <AT91_PMC_PCKRDY(1)>;
 209                                         };
 210                                 };
 211
 212                                 smd: smdclk {
 213                                         compatible = "atmel,at91sam9x5-clk-smd";
 214                                         #clock-cells = <0>;
 215                                         clocks = <&plladiv>, <&utmi>;
 216                                 };
 217
 218                                 systemck {
 219                                         compatible = "atmel,at91rm9200-clk-system";
 220                                         #address-cells = <1>;
 221                                         #size-cells = <0>;
 222
 223                                         ddrck: ddrck@2 {
 224                                                 #clock-cells = <0>;
 225                                                 reg = <2>;
 226                                                 clocks = <&mck>;
 227                                         };
 228
 229                                         smdck: smdck@4 {
 230                                                 #clock-cells = <0>;
 231                                                 reg = <4>;
 232                                                 clocks = <&smd>;
 233                                         };
 234
 235                                         uhpck: uhpck@6 {
 236                                                 #clock-cells = <0>;
 237                                                 reg = <6>;
 238                                                 clocks = <&usb>;
 239                                         };
 240
 241                                         udpck: udpck@7 {
 242                                                 #clock-cells = <0>;
 243                                                 reg = <7>;
 244                                                 clocks = <&usb>;
 245                                         };
 246
 247                                         pck0: pck0@8 {
 248                                                 #clock-cells = <0>;
 249                                                 reg = <8>;
 250                                                 clocks = <&prog0>;
 251                                         };
 252
 253                                         pck1: pck1@9 {
 254                                                 #clock-cells = <0>;
 255                                                 reg = <9>;
 256                                                 clocks = <&prog1>;
 257                                         };
 258                                 };
 259
 260                                 periphck {
 261                                         compatible = "atmel,at91sam9x5-clk-peripheral";
 262                                         #address-cells = <1>;
 263                                         #size-cells = <0>;
 264                                         clocks = <&mck>;
 265                                         u-boot,dm-pre-reloc;
 266
 267
 268                                         pioAB_clk: pioAB_clk@2 {
 269                                                 #clock-cells = <0>;
 270                                                 reg = <2>;
 271                                         };
 272
 273                                         pioCD_clk: pioCD_clk@3 {
 274                                                 #clock-cells = <0>;
 275                                                 reg = <3>;
 276                                         };
 277
 278                                         smd_clk: smd_clk@4 {
 279                                                 #clock-cells = <0>;
 280                                                 reg = <4>;
 281                                         };
 282
 283                                         usart0_clk: usart0_clk@5 {
 284                                                 #clock-cells = <0>;
 285                                                 reg = <5>;
 286                                         };
 287
 288                                         usart1_clk: usart1_clk@6 {
 289                                                 #clock-cells = <0>;
 290                                                 reg = <6>;
 291                                         };
 292
 293                                         usart2_clk: usart2_clk@7 {
 294                                                 #clock-cells = <0>;
 295                                                 reg = <7>;
 296                                         };
 297
 298                                         twi0_clk: twi0_clk@9 {
 299                                                 reg = <9>;
 300                                                 #clock-cells = <0>;
 301                                         };
 302
 303                                         twi1_clk: twi1_clk@10 {
 304                                                 #clock-cells = <0>;
 305                                                 reg = <10>;
 306                                         };
 307
 308                                         twi2_clk: twi2_clk@11 {
 309                                                 #clock-cells = <0>;
 310                                                 reg = <11>;
 311                                         };
 312
 313                                         mci0_clk: mci0_clk@12 {
 314                                                 #clock-cells = <0>;
 315                                                 reg = <12>;
 316                                         };
 317
 318                                         spi0_clk: spi0_clk@13 {
 319                                                 #clock-cells = <0>;
 320                                                 reg = <13>;
 321                                         };
 322
 323                                         spi1_clk: spi1_clk@14 {
 324                                                 #clock-cells = <0>;
 325                                                 reg = <14>;
 326                                         };
 327
 328                                         uart0_clk: uart0_clk@15 {
 329                                                 #clock-cells = <0>;
 330                                                 reg = <15>;
 331                                         };
 332
 333                                         uart1_clk: uart1_clk@16 {
 334                                                 #clock-cells = <0>;
 335                                                 reg = <16>;
 336                                         };
 337
 338                                         tcb0_clk: tcb0_clk@17 {
 339                                                 #clock-cells = <0>;
 340                                                 reg = <17>;
 341                                         };
 342
 343                                         pwm_clk: pwm_clk@18 {
 344                                                 #clock-cells = <0>;
 345                                                 reg = <18>;
 346                                         };
 347
 348                                         adc_clk: adc_clk@19 {
 349                                                 #clock-cells = <0>;
 350                                                 reg = <19>;
 351                                         };
 352
 353                                         dma0_clk: dma0_clk@20 {
 354                                                 #clock-cells = <0>;
 355                                                 reg = <20>;
 356                                         };
 357
 358                                         dma1_clk: dma1_clk@21 {
 359                                                 #clock-cells = <0>;
 360                                                 reg = <21>;
 361                                         };
 362
 363                                         uhphs_clk: uhphs_clk@22 {
 364                                                 #clock-cells = <0>;
 365                                                 reg = <22>;
 366                                         };
 367
 368                                         udphs_clk: udphs_clk@23 {
 369                                                 #clock-cells = <0>;
 370                                                 reg = <23>;
 371                                         };
 372
 373                                         mci1_clk: mci1_clk@26 {
 374                                                 #clock-cells = <0>;
 375                                                 reg = <26>;
 376                                         };
 377
 378                                         ssc0_clk: ssc0_clk@28 {
 379                                                 #clock-cells = <0>;
 380                                                 reg = <28>;
 381                                         };
 382                                 };
 383                         };
 384
 385                         rstc@fffffe00 {
 386                                 compatible = "atmel,at91sam9g45-rstc";
 387                                 reg = <0xfffffe00 0x10>;
 388                                 clocks = <&clk32k>;
 389                         };
 390
 391                         shdwc@fffffe10 {
 392                                 compatible = "atmel,at91sam9x5-shdwc";
 393                                 reg = <0xfffffe10 0x10>;
 394                                 clocks = <&clk32k>;
 395                         };
 396
 397                         pit: timer@fffffe30 {
 398                                 compatible = "atmel,at91sam9260-pit";
 399                                 reg = <0xfffffe30 0xf>;
 400                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 401                                 clocks = <&mck>;
 402                         };
 403
 404                         sckc@fffffe50 {
 405                                 compatible = "atmel,at91sam9x5-sckc";
 406                                 reg = <0xfffffe50 0x4>;
 407
 408                                 slow_osc: slow_osc {
 409                                         compatible = "atmel,at91sam9x5-clk-slow-osc";
 410                                         #clock-cells = <0>;
 411                                         clocks = <&slow_xtal>;
 412                                 };
 413
 414                                 slow_rc_osc: slow_rc_osc {
 415                                         compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
 416                                         #clock-cells = <0>;
 417                                         clock-frequency = <32768>;
 418                                         clock-accuracy = <50000000>;
 419                                 };
 420
 421                                 clk32k: slck {
 422                                         compatible = "atmel,at91sam9x5-clk-slow";
 423                                         #clock-cells = <0>;
 424                                         clocks = <&slow_rc_osc>, <&slow_osc>;
 425                                 };
 426                         };
 427
 428                         tcb0: timer@f8008000 {
 429                                 compatible = "atmel,at91sam9x5-tcb";
 430                                 reg = <0xf8008000 0x100>;
 431                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 432                                 clocks = <&tcb0_clk>, <&clk32k>;
 433                                 clock-names = "t0_clk", "slow_clk";
 434                         };
 435
 436                         tcb1: timer@f800c000 {
 437                                 compatible = "atmel,at91sam9x5-tcb";
 438                                 reg = <0xf800c000 0x100>;
 439                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
 440                                 clocks = <&tcb0_clk>, <&clk32k>;
 441                                 clock-names = "t0_clk", "slow_clk";
 442                         };
 443
 444                         dma0: dma-controller@ffffec00 {
 445                                 compatible = "atmel,at91sam9g45-dma";
 446                                 reg = <0xffffec00 0x200>;
 447                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 448                                 #dma-cells = <2>;
 449                                 clocks = <&dma0_clk>;
 450                                 clock-names = "dma_clk";
 451                         };
 452
 453                         dma1: dma-controller@ffffee00 {
 454                                 compatible = "atmel,at91sam9g45-dma";
 455                                 reg = <0xffffee00 0x200>;
 456                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 457                                 #dma-cells = <2>;
 458                                 clocks = <&dma1_clk>;
 459                                 clock-names = "dma_clk";
 460                         };
 461
 462                         pinctrl@fffff400 {
 463                                 #address-cells = <1>;
 464                                 #size-cells = <1>;
 465                                 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 466                                 ranges = <0xfffff400 0xfffff400 0x800>;
 467                                 reg = <0xfffff400 0x200         /* pioA */
 468                                        0xfffff600 0x200         /* pioB */
 469                                        0xfffff800 0x200         /* pioC */
 470                                        0xfffffa00 0x200         /* pioD */
 471                                        >;
 472                                 u-boot,dm-pre-reloc;
 473
 474
 475                                 /* shared pinctrl settings */
 476                                 dbgu {
 477                                         u-boot,dm-pre-reloc;
 478                                         pinctrl_dbgu: dbgu-0 {
 479                                                 atmel,pins =
 480                                                         <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 481                                                          AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 482                                         };
 483                                 };
 484
 485                                 usart0 {
 486                                         pinctrl_usart0: usart0-0 {
 487                                                 atmel,pins =
 488                                                         <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA0 periph A with pullup */
 489                                                          AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA1 periph A */
 490                                         };
 491
 492                                         pinctrl_usart0_rts: usart0_rts-0 {
 493                                                 atmel,pins =
 494                                                         <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA2 periph A */
 495                                         };
 496
 497                                         pinctrl_usart0_cts: usart0_cts-0 {
 498                                                 atmel,pins =
 499                                                         <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA3 periph A */
 500                                         };
 501
 502                                         pinctrl_usart0_sck: usart0_sck-0 {
 503                                                 atmel,pins =
 504                                                         <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA4 periph A */
 505                                         };
 506                                 };
 507
 508                                 usart1 {
 509                                         pinctrl_usart1: usart1-0 {
 510                                                 atmel,pins =
 511                                                         <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA5 periph A with pullup */
 512                                                          AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA6 periph A */
 513                                         };
 514
 515                                         pinctrl_usart1_rts: usart1_rts-0 {
 516                                                 atmel,pins =
 517                                                         <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */
 518                                         };
 519
 520                                         pinctrl_usart1_cts: usart1_cts-0 {
 521                                                 atmel,pins =
 522                                                         <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */
 523                                         };
 524
 525                                         pinctrl_usart1_sck: usart1_sck-0 {
 526                                                 atmel,pins =
 527                                                         <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */
 528                                         };
 529                                 };
 530
 531                                 usart2 {
 532                                         pinctrl_usart2: usart2-0 {
 533                                                 atmel,pins =
 534                                                         <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
 535                                                          AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA8 periph A */
 536                                         };
 537
 538                                         pinctrl_usart2_rts: usart2_rts-0 {
 539                                                 atmel,pins =
 540                                                         <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB0 periph B */
 541                                         };
 542
 543                                         pinctrl_usart2_cts: usart2_cts-0 {
 544                                                 atmel,pins =
 545                                                         <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB1 periph B */
 546                                         };
 547
 548                                         pinctrl_usart2_sck: usart2_sck-0 {
 549                                                 atmel,pins =
 550                                                         <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB2 periph B */
 551                                         };
 552                                 };
 553
 554                                 uart0 {
 555                                         pinctrl_uart0: uart0-0 {
 556                                                 atmel,pins =
 557                                                         <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC8 periph C */
 558                                                          AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;       /* PC9 periph C with pullup */
 559                                         };
 560                                 };
 561
 562                                 uart1 {
 563                                         pinctrl_uart1: uart1-0 {
 564                                                 atmel,pins =
 565                                                         <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE   /* PC16 periph C */
 566                                                          AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;      /* PC17 periph C with pullup */
 567                                         };
 568                                 };
 569
 570                                 nand {
 571                                         pinctrl_nand: nand-0 {
 572                                                 atmel,pins =
 573                                                         <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD0 periph A Read Enable */
 574                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD1 periph A Write Enable */
 575                                                          AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD2 periph A Address Latch Enable */
 576                                                          AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD3 periph A Command Latch Enable */
 577                                                          AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PD4 gpio Chip Enable pin pull_up */
 578                                                          AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PD5 gpio RDY/BUSY pin pull_up */
 579                                                          AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD6 periph A Data bit 0 */
 580                                                          AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD7 periph A Data bit 1 */
 581                                                          AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD8 periph A Data bit 2 */
 582                                                          AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD9 periph A Data bit 3 */
 583                                                          AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD10 periph A Data bit 4 */
 584                                                          AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD11 periph A Data bit 5 */
 585                                                          AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD12 periph A Data bit 6 */
 586                                                          AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD13 periph A Data bit 7 */
 587                                         };
 588
 589                                         pinctrl_nand_16bits: nand_16bits-0 {
 590                                                 atmel,pins =
 591                                                         <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD14 periph A Data bit 8 */
 592                                                          AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD15 periph A Data bit 9 */
 593                                                          AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD16 periph A Data bit 10 */
 594                                                          AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD17 periph A Data bit 11 */
 595                                                          AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD18 periph A Data bit 12 */
 596                                                          AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD19 periph A Data bit 13 */
 597                                                          AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD20 periph A Data bit 14 */
 598                                                          AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD21 periph A Data bit 15 */
 599                                         };
 600                                 };
 601
 602                                 mmc0 {
 603                                         pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 604                                                 atmel,pins =
 605                                                         <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
 606                                                          AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA16 periph A with pullup */
 607                                                          AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA15 periph A with pullup */
 608                                         };
 609
 610                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 611                                                 atmel,pins =
 612                                                         <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA18 periph A with pullup */
 613                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA19 periph A with pullup */
 614                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA20 periph A with pullup */
 615                                         };
 616                                 };
 617
 618                                 mmc1 {
 619                                         pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
 620                                                 atmel,pins =
 621                                                         <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA13 periph B */
 622                                                          AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PA12 periph B with pullup */
 623                                                          AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* PA11 periph B with pullup */
 624                                         };
 625
 626                                         pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
 627                                                 atmel,pins =
 628                                                         <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */
 629                                                          AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */
 630                                                          AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA4 periph B with pullup */
 631                                         };
 632                                 };
 633
 634                                 ssc0 {
 635                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 636                                                 atmel,pins =
 637                                                         <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA24 periph B */
 638                                                          AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
 639                                                          AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */
 640                                         };
 641
 642                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 643                                                 atmel,pins =
 644                                                         <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 645                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 646                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
 647                                         };
 648                                 };
 649
 650                                 spi0 {
 651                                         pinctrl_spi0: spi0-0 {
 652                                                 atmel,pins =
 653                                                         <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA11 periph A SPI0_MISO pin */
 654                                                          AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A SPI0_MOSI pin */
 655                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */
 656                                         };
 657                                 };
 658
 659                                 spi1 {
 660                                         pinctrl_spi1: spi1-0 {
 661                                                 atmel,pins =
 662                                                         <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA21 periph B SPI1_MISO pin */
 663                                                          AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B SPI1_MOSI pin */
 664                                                          AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */
 665                                         };
 666                                 };
 667
 668                                 i2c0 {
 669                                         pinctrl_i2c0: i2c0-0 {
 670                                                 atmel,pins =
 671                                                         <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA30 periph A I2C0 data */
 672                                                          AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */
 673                                         };
 674                                 };
 675
 676                                 i2c1 {
 677                                         pinctrl_i2c1: i2c1-0 {
 678                                                 atmel,pins =
 679                                                         <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE    /* PC0 periph C I2C1 data */
 680                                                          AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;  /* PC1 periph C I2C1 clock */
 681                                         };
 682                                 };
 683
 684                                 i2c2 {
 685                                         pinctrl_i2c2: i2c2-0 {
 686                                                 atmel,pins =
 687                                                         <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PB4 periph B I2C2 data */
 688                                                          AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PB5 periph B I2C2 clock */
 689                                         };
 690                                 };
 691
 692                                 i2c_gpio0 {
 693                                         pinctrl_i2c_gpio0: i2c_gpio0-0 {
 694                                                 atmel,pins =
 695                                                         <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */
 696                                                          AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;       /* PA31 gpio multidrive I2C0 clock */
 697                                         };
 698                                 };
 699
 700                                 i2c_gpio1 {
 701                                         pinctrl_i2c_gpio1: i2c_gpio1-0 {
 702                                                 atmel,pins =
 703                                                         <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PC0 gpio multidrive I2C1 data */
 704                                                          AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PC1 gpio multidrive I2C1 clock */
 705                                         };
 706                                 };
 707
 708                                 i2c_gpio2 {
 709                                         pinctrl_i2c_gpio2: i2c_gpio2-0 {
 710                                                 atmel,pins =
 711                                                         <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE  /* PB4 gpio multidrive I2C2 data */
 712                                                          AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;        /* PB5 gpio multidrive I2C2 clock */
 713                                         };
 714                                 };
 715
 716                                 pwm0 {
 717                                         pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
 718                                                 atmel,pins =
 719                                                         <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 720                                         };
 721                                         pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
 722                                                 atmel,pins =
 723                                                         <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 724                                         };
 725                                         pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
 726                                                 atmel,pins =
 727                                                         <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 728                                         };
 729
 730                                         pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
 731                                                 atmel,pins =
 732                                                         <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 733                                         };
 734                                         pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
 735                                                 atmel,pins =
 736                                                         <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 737                                         };
 738                                         pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
 739                                                 atmel,pins =
 740                                                         <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 741                                         };
 742
 743                                         pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
 744                                                 atmel,pins =
 745                                                         <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 746                                         };
 747                                         pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
 748                                                 atmel,pins =
 749                                                         <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 750                                         };
 751
 752                                         pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
 753                                                 atmel,pins =
 754                                                         <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 755                                         };
 756                                         pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
 757                                                 atmel,pins =
 758                                                         <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 759                                         };
 760                                 };
 761
 762                                 tcb0 {
 763                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 764                                                 atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 765                                         };
 766
 767                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
 768                                                 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 769                                         };
 770
 771                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
 772                                                 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 773                                         };
 774
 775                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
 776                                                 atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 777                                         };
 778
 779                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
 780                                                 atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 781                                         };
 782
 783                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
 784                                                 atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 785                                         };
 786
 787                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
 788                                                 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 789                                         };
 790
 791                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
 792                                                 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 793                                         };
 794
 795                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 796                                                 atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 797                                         };
 798                                 };
 799
 800                                 tcb1 {
 801                                         pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
 802                                                 atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 803                                         };
 804
 805                                         pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
 806                                                 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 807                                         };
 808
 809                                         pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
 810                                                 atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 811                                         };
 812
 813                                         pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
 814                                                 atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 815                                         };
 816
 817                                         pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
 818                                                 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 819                                         };
 820
 821                                         pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
 822                                                 atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 823                                         };
 824
 825                                         pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
 826                                                 atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 827                                         };
 828
 829                                         pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
 830                                                 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 831                                         };
 832
 833                                         pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
 834                                                 atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;
 835                                         };
 836                                 };
 837                         };
 838
 839                         pioA: gpio@fffff400 {
 840                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 841                                 reg = <0xfffff400 0x200>;
 842                                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 843                                 #gpio-cells = <2>;
 844                                 gpio-controller;
 845                                 interrupt-controller;
 846                                 #interrupt-cells = <2>;
 847                                 clocks = <&pioAB_clk>;
 848                         };
 849
 850                         pioB: gpio@fffff600 {
 851                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 852                                 reg = <0xfffff600 0x200>;
 853                                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 854                                 #gpio-cells = <2>;
 855                                 gpio-controller;
 856                                 #gpio-lines = <19>;
 857                                 interrupt-controller;
 858                                 #interrupt-cells = <2>;
 859                                 clocks = <&pioAB_clk>;
 860                         };
 861
 862                         pioC: gpio@fffff800 {
 863                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 864                                 reg = <0xfffff800 0x200>;
 865                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 866                                 #gpio-cells = <2>;
 867                                 gpio-controller;
 868                                 interrupt-controller;
 869                                 #interrupt-cells = <2>;
 870                                 clocks = <&pioCD_clk>;
 871                         };
 872
 873                         pioD: gpio@fffffa00 {
 874                                 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 875                                 reg = <0xfffffa00 0x200>;
 876                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 877                                 #gpio-cells = <2>;
 878                                 gpio-controller;
 879                                 #gpio-lines = <22>;
 880                                 interrupt-controller;
 881                                 #interrupt-cells = <2>;
 882                                 clocks = <&pioCD_clk>;
 883                         };
 884
 885                         ssc0: ssc@f0010000 {
 886                                 compatible = "atmel,at91sam9g45-ssc";
 887                                 reg = <0xf0010000 0x4000>;
 888                                 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 889                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
 890                                        <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
 891                                 dma-names = "tx", "rx";
 892                                 pinctrl-names = "default";
 893                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 894                                 clocks = <&ssc0_clk>;
 895                                 clock-names = "pclk";
 896                                 status = "disabled";
 897                         };
 898
 899                         mmc0: mmc@f0008000 {
 900                                 compatible = "atmel,hsmci";
 901                                 reg = <0xf0008000 0x600>;
 902                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 903                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 904                                 dma-names = "rxtx";
 905                                 pinctrl-names = "default";
 906                                 clocks = <&mci0_clk>;
 907                                 clock-names = "mci_clk";
 908                                 #address-cells = <1>;
 909                                 #size-cells = <0>;
 910                                 status = "disabled";
 911                         };
 912
 913                         mmc1: mmc@f000c000 {
 914                                 compatible = "atmel,hsmci";
 915                                 reg = <0xf000c000 0x600>;
 916                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 917                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 918                                 dma-names = "rxtx";
 919                                 pinctrl-names = "default";
 920                                 clocks = <&mci1_clk>;
 921                                 clock-names = "mci_clk";
 922                                 #address-cells = <1>;
 923                                 #size-cells = <0>;
 924                                 status = "disabled";
 925                         };
 926
 927                         dbgu: serial@fffff200 {
 928                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 929                                 reg = <0xfffff200 0x200>;
 930                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 931                                 pinctrl-names = "default";
 932                                 pinctrl-0 = <&pinctrl_dbgu>;
 933                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
 934                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 935                                 dma-names = "tx", "rx";
 936                                 clocks = <&mck>;
 937                                 clock-names = "usart";
 938                                 status = "disabled";
 939                         };
 940
 941                         usart0: serial@f801c000 {
 942                                 compatible = "atmel,at91sam9260-usart";
 943                                 reg = <0xf801c000 0x200>;
 944                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 945                                 pinctrl-names = "default";
 946                                 pinctrl-0 = <&pinctrl_usart0>;
 947                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
 948                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 949                                 dma-names = "tx", "rx";
 950                                 clocks = <&usart0_clk>;
 951                                 clock-names = "usart";
 952                                 status = "disabled";
 953                         };
 954
 955                         usart1: serial@f8020000 {
 956                                 compatible = "atmel,at91sam9260-usart";
 957                                 reg = <0xf8020000 0x200>;
 958                                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 959                                 pinctrl-names = "default";
 960                                 pinctrl-0 = <&pinctrl_usart1>;
 961                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
 962                                        <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 963                                 dma-names = "tx", "rx";
 964                                 clocks = <&usart1_clk>;
 965                                 clock-names = "usart";
 966                                 status = "disabled";
 967                         };
 968
 969                         usart2: serial@f8024000 {
 970                                 compatible = "atmel,at91sam9260-usart";
 971                                 reg = <0xf8024000 0x200>;
 972                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 973                                 pinctrl-names = "default";
 974                                 pinctrl-0 = <&pinctrl_usart2>;
 975                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
 976                                        <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 977                                 dma-names = "tx", "rx";
 978                                 clocks = <&usart2_clk>;
 979                                 clock-names = "usart";
 980                                 status = "disabled";
 981                         };
 982
 983                         i2c0: i2c@f8010000 {
 984                                 compatible = "atmel,at91sam9x5-i2c";
 985                                 reg = <0xf8010000 0x100>;
 986                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>;
 987                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>,
 988                                        <&dma0 1 AT91_DMA_CFG_PER_ID(8)>;
 989                                 dma-names = "tx", "rx";
 990                                 #address-cells = <1>;
 991                                 #size-cells = <0>;
 992                                 pinctrl-names = "default";
 993                                 pinctrl-0 = <&pinctrl_i2c0>;
 994                                 clocks = <&twi0_clk>;
 995                                 status = "disabled";
 996                         };
 997
 998                         i2c1: i2c@f8014000 {
 999                                 compatible = "atmel,at91sam9x5-i2c";
1000                                 reg = <0xf8014000 0x100>;
1001                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>;
1002                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>,
1003                                        <&dma1 1 AT91_DMA_CFG_PER_ID(6)>;
1004                                 dma-names = "tx", "rx";
1005                                 #address-cells = <1>;
1006                                 #size-cells = <0>;
1007                                 pinctrl-names = "default";
1008                                 pinctrl-0 = <&pinctrl_i2c1>;
1009                                 clocks = <&twi1_clk>;
1010                                 status = "disabled";
1011                         };
1012
1013                         i2c2: i2c@f8018000 {
1014                                 compatible = "atmel,at91sam9x5-i2c";
1015                                 reg = <0xf8018000 0x100>;
1016                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
1017                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>,
1018                                        <&dma0 1 AT91_DMA_CFG_PER_ID(10)>;
1019                                 dma-names = "tx", "rx";
1020                                 #address-cells = <1>;
1021                                 #size-cells = <0>;
1022                                 pinctrl-names = "default";
1023                                 pinctrl-0 = <&pinctrl_i2c2>;
1024                                 clocks = <&twi2_clk>;
1025                                 status = "disabled";
1026                         };
1027
1028                         uart0: serial@f8040000 {
1029                                 compatible = "atmel,at91sam9260-usart";
1030                                 reg = <0xf8040000 0x200>;
1031                                 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
1032                                 pinctrl-names = "default";
1033                                 pinctrl-0 = <&pinctrl_uart0>;
1034                                 clocks = <&uart0_clk>;
1035                                 clock-names = "usart";
1036                                 status = "disabled";
1037                         };
1038
1039                         uart1: serial@f8044000 {
1040                                 compatible = "atmel,at91sam9260-usart";
1041                                 reg = <0xf8044000 0x200>;
1042                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
1043                                 pinctrl-names = "default";
1044                                 pinctrl-0 = <&pinctrl_uart1>;
1045                                 clocks = <&uart1_clk>;
1046                                 clock-names = "usart";
1047                                 status = "disabled";
1048                         };
1049
1050                         adc0: adc@f804c000 {
1051                                 #address-cells = <1>;
1052                                 #size-cells = <0>;
1053                                 compatible = "atmel,at91sam9x5-adc";
1054                                 reg = <0xf804c000 0x100>;
1055                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
1056                                 clocks = <&adc_clk>,
1057                                          <&adc_op_clk>;
1058                                 clock-names = "adc_clk", "adc_op_clk";
1059                                 atmel,adc-use-external-triggers;
1060                                 atmel,adc-channels-used = <0xffff>;
1061                                 atmel,adc-vref = <3300>;
1062                                 atmel,adc-startup-time = <40>;
1063                                 atmel,adc-sample-hold-time = <11>;
1064                                 atmel,adc-res = <8 10>;
1065                                 atmel,adc-res-names = "lowres", "highres";
1066                                 atmel,adc-use-res = "highres";
1067
1068                                 trigger0 {
1069                                         trigger-name = "external-rising";
1070                                         trigger-value = <0x1>;
1071                                         trigger-external;
1072                                 };
1073
1074                                 trigger1 {
1075                                         trigger-name = "external-falling";
1076                                         trigger-value = <0x2>;
1077                                         trigger-external;
1078                                 };
1079
1080                                 trigger2 {
1081                                         trigger-name = "external-any";
1082                                         trigger-value = <0x3>;
1083                                         trigger-external;
1084                                 };
1085
1086                                 trigger3 {
1087                                         trigger-name = "continuous";
1088                                         trigger-value = <0x6>;
1089                                 };
1090                         };
1091
1092                         spi0: spi@f0000000 {
1093                                 #address-cells = <1>;
1094                                 #size-cells = <0>;
1095                                 compatible = "atmel,at91rm9200-spi";
1096                                 reg = <0xf0000000 0x100>;
1097                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
1098                                 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>,
1099                                        <&dma0 1 AT91_DMA_CFG_PER_ID(2)>;
1100                                 dma-names = "tx", "rx";
1101                                 pinctrl-names = "default";
1102                                 pinctrl-0 = <&pinctrl_spi0>;
1103                                 clocks = <&spi0_clk>;
1104                                 clock-names = "spi_clk";
1105                                 status = "disabled";
1106                         };
1107
1108                         spi1: spi@f0004000 {
1109                                 #address-cells = <1>;
1110                                 #size-cells = <0>;
1111                                 compatible = "atmel,at91rm9200-spi";
1112                                 reg = <0xf0004000 0x100>;
1113                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
1114                                 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>,
1115                                        <&dma1 1 AT91_DMA_CFG_PER_ID(2)>;
1116                                 dma-names = "tx", "rx";
1117                                 pinctrl-names = "default";
1118                                 pinctrl-0 = <&pinctrl_spi1>;
1119                                 clocks = <&spi1_clk>;
1120                                 clock-names = "spi_clk";
1121                                 status = "disabled";
1122                         };
1123
1124                         usb2: gadget@f803c000 {
1125                                 #address-cells = <1>;
1126                                 #size-cells = <0>;
1127                                 compatible = "atmel,at91sam9g45-udc";
1128                                 reg = <0x00500000 0x80000
1129                                        0xf803c000 0x400>;
1130                                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
1131                                 clocks = <&utmi>, <&udphs_clk>;
1132                                 clock-names = "hclk", "pclk";
1133                                 status = "disabled";
1134
1135                                 ep@0 {
1136                                         reg = <0>;
1137                                         atmel,fifo-size = <64>;
1138                                         atmel,nb-banks = <1>;
1139                                 };
1140
1141                                 ep@1 {
1142                                         reg = <1>;
1143                                         atmel,fifo-size = <1024>;
1144                                         atmel,nb-banks = <2>;
1145                                         atmel,can-dma;
1146                                         atmel,can-isoc;
1147                                 };
1148
1149                                 ep@2 {
1150                                         reg = <2>;
1151                                         atmel,fifo-size = <1024>;
1152                                         atmel,nb-banks = <2>;
1153                                         atmel,can-dma;
1154                                         atmel,can-isoc;
1155                                 };
1156
1157                                 ep@3 {
1158                                         reg = <3>;
1159                                         atmel,fifo-size = <1024>;
1160                                         atmel,nb-banks = <3>;
1161                                         atmel,can-dma;
1162                                 };
1163
1164                                 ep@4 {
1165                                         reg = <4>;
1166                                         atmel,fifo-size = <1024>;
1167                                         atmel,nb-banks = <3>;
1168                                         atmel,can-dma;
1169                                 };
1170
1171                                 ep@5 {
1172                                         reg = <5>;
1173                                         atmel,fifo-size = <1024>;
1174                                         atmel,nb-banks = <3>;
1175                                         atmel,can-dma;
1176                                         atmel,can-isoc;
1177                                 };
1178
1179                                 ep@6 {
1180                                         reg = <6>;
1181                                         atmel,fifo-size = <1024>;
1182                                         atmel,nb-banks = <3>;
1183                                         atmel,can-dma;
1184                                         atmel,can-isoc;
1185                                 };
1186                         };
1187
1188                         watchdog@fffffe40 {
1189                                 compatible = "atmel,at91sam9260-wdt";
1190                                 reg = <0xfffffe40 0x10>;
1191                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1192                                 clocks = <&clk32k>;
1193                                 atmel,watchdog-type = "hardware";
1194                                 atmel,reset-type = "all";
1195                                 atmel,dbg-halt;
1196                                 status = "disabled";
1197                         };
1198
1199                         rtc@fffffeb0 {
1200                                 compatible = "atmel,at91sam9x5-rtc";
1201                                 reg = <0xfffffeb0 0x40>;
1202                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1203                                 clocks = <&clk32k>;
1204                                 status = "disabled";
1205                         };
1206
1207                         pwm0: pwm@f8034000 {
1208                                 compatible = "atmel,at91sam9rl-pwm";
1209                                 reg = <0xf8034000 0x300>;
1210                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
1211                                 clocks = <&pwm_clk>;
1212                                 #pwm-cells = <3>;
1213                                 status = "disabled";
1214                         };
1215                 };
1216
1217                 nand0: nand@40000000 {
1218                         compatible = "atmel,at91rm9200-nand";
1219                         #address-cells = <1>;
1220                         #size-cells = <1>;
1221                         reg = <0x40000000 0x10000000
1222                                0xffffe000 0x600         /* PMECC Registers */
1223                                0xffffe600 0x200         /* PMECC Error Location Registers */
1224                                0x00108000 0x18000       /* PMECC looup table in ROM code  */
1225                               >;
1226                         atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
1227                         atmel,nand-addr-offset = <21>;
1228                         atmel,nand-cmd-offset = <22>;
1229                         atmel,nand-has-dma;
1230                         pinctrl-names = "default";
1231                         pinctrl-0 = <&pinctrl_nand>;
1232                         gpios = <&pioD 5 GPIO_ACTIVE_HIGH
1233                                  &pioD 4 GPIO_ACTIVE_HIGH
1234                                  0
1235                                 >;
1236                         status = "disabled";
1237                 };
1238
1239                 usb0: ohci@00600000 {
1240                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1241                         reg = <0x00600000 0x100000>;
1242                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
1243                         clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
1244                         clock-names = "ohci_clk", "hclk", "uhpck";
1245                         status = "disabled";
1246                 };
1247
1248                 usb1: ehci@00700000 {
1249                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
1250                         reg = <0x00700000 0x100000>;
1251                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
1252                         clocks = <&utmi>, <&uhphs_clk>;
1253                         clock-names = "usb_clk", "ehci_clk";
1254                         status = "disabled";
1255                 };
1256         };
1257
1258         i2c-gpio-0 {
1259                 compatible = "i2c-gpio";
1260                 gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
1261                          &pioA 31 GPIO_ACTIVE_HIGH /* scl */
1262                         >;
1263                 i2c-gpio,sda-open-drain;
1264                 i2c-gpio,scl-open-drain;
1265                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1266                 #address-cells = <1>;
1267                 #size-cells = <0>;
1268                 pinctrl-names = "default";
1269                 pinctrl-0 = <&pinctrl_i2c_gpio0>;
1270                 status = "disabled";
1271         };
1272
1273         i2c-gpio-1 {
1274                 compatible = "i2c-gpio";
1275                 gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
1276                          &pioC 1 GPIO_ACTIVE_HIGH /* scl */
1277                         >;
1278                 i2c-gpio,sda-open-drain;
1279                 i2c-gpio,scl-open-drain;
1280                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1281                 #address-cells = <1>;
1282                 #size-cells = <0>;
1283                 pinctrl-names = "default";
1284                 pinctrl-0 = <&pinctrl_i2c_gpio1>;
1285                 status = "disabled";
1286         };
1287
1288         i2c-gpio-2 {
1289                 compatible = "i2c-gpio";
1290                 gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
1291                          &pioB 5 GPIO_ACTIVE_HIGH /* scl */
1292                         >;
1293                 i2c-gpio,sda-open-drain;
1294                 i2c-gpio,scl-open-drain;
1295                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1296                 #address-cells = <1>;
1297                 #size-cells = <0>;
1298                 pinctrl-names = "default";
1299                 pinctrl-0 = <&pinctrl_i2c_gpio2>;
1300                 status = "disabled";
1301         };
1302 };