arch/arm/dts/at91sam9g45.dtsi

   1 /*
   2  * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
   3  *                    applies to AT91SAM9G45, AT91SAM9M10,
   4  *                    AT91SAM9G46, AT91SAM9M11 SoC
   5  *
   6  *  Copyright (C) 2011 Atmel,
   7  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
   8  *
   9  * Licensed under GPLv2 or later.
  10  */
  11
  12 #include "skeleton.dtsi"
  13 #include <dt-bindings/dma/at91.h>
  14 #include <dt-bindings/pinctrl/at91.h>
  15 #include <dt-bindings/interrupt-controller/irq.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/clock/at91.h>
  18
  19 / {
  20         model = "Atmel AT91SAM9G45 family SoC";
  21         compatible = "atmel,at91sam9g45";
  22         interrupt-parent = <&aic>;
  23
  24         aliases {
  25                 serial0 = &dbgu;
  26                 serial1 = &usart0;
  27                 serial2 = &usart1;
  28                 serial3 = &usart2;
  29                 serial4 = &usart3;
  30                 gpio0 = &pioA;
  31                 gpio1 = &pioB;
  32                 gpio2 = &pioC;
  33                 gpio3 = &pioD;
  34                 gpio4 = &pioE;
  35                 tcb0 = &tcb0;
  36                 tcb1 = &tcb1;
  37                 i2c0 = &i2c0;
  38                 i2c1 = &i2c1;
  39                 ssc0 = &ssc0;
  40                 ssc1 = &ssc1;
  41                 pwm0 = &pwm0;
  42         };
  43         cpus {
  44                 cpu {
  45                         compatible = "arm,arm926ej-s";
  46                         device_type = "cpu";
  47                 };
  48         };
  49
  50         memory {
  51                 reg = <0x70000000 0x10000000>;
  52         };
  53
  54         clocks {
  55                 slow_xtal: slow_xtal {
  56                         compatible = "fixed-clock";
  57                         #clock-cells = <0>;
  58                         clock-frequency = <0>;
  59                 };
  60
  61                 main_xtal: main_xtal {
  62                         compatible = "fixed-clock";
  63                         #clock-cells = <0>;
  64                         clock-frequency = <0>;
  65                 };
  66
  67                 adc_op_clk: adc_op_clk{
  68                         compatible = "fixed-clock";
  69                         #clock-cells = <0>;
  70                         clock-frequency = <300000>;
  71                 };
  72         };
  73
  74         sram: sram@00300000 {
  75                 compatible = "mmio-sram";
  76                 reg = <0x00300000 0x10000>;
  77         };
  78
  79         ahb {
  80                 compatible = "simple-bus";
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 ranges;
  84                 u-boot,dm-pre-reloc;
  85
  86                 apb {
  87                         compatible = "simple-bus";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90                         ranges;
  91                         u-boot,dm-pre-reloc;
  92
  93                         aic: interrupt-controller@fffff000 {
  94                                 #interrupt-cells = <3>;
  95                                 compatible = "atmel,at91rm9200-aic";
  96                                 interrupt-controller;
  97                                 reg = <0xfffff000 0x200>;
  98                                 atmel,external-irqs = <31>;
  99                         };
 100
 101                         ramc0: ramc@ffffe400 {
 102                                 compatible = "atmel,at91sam9g45-ddramc";
 103                                 reg = <0xffffe400 0x200>;
 104                                 clocks = <&ddrck>;
 105                                 clock-names = "ddrck";
 106                         };
 107
 108                         ramc1: ramc@ffffe600 {
 109                                 compatible = "atmel,at91sam9g45-ddramc";
 110                                 reg = <0xffffe600 0x200>;
 111                                 clocks = <&ddrck>;
 112                                 clock-names = "ddrck";
 113                         };
 114
 115                         pmc: pmc@fffffc00 {
 116                                 compatible = "atmel,at91sam9g45-pmc", "syscon";
 117                                 reg = <0xfffffc00 0x100>;
 118                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 119                                 interrupt-controller;
 120                                 #address-cells = <1>;
 121                                 #size-cells = <0>;
 122                                 #interrupt-cells = <1>;
 123                                 u-boot,dm-pre-reloc;
 124
 125                                 main_osc: main_osc {
 126                                         compatible = "atmel,at91rm9200-clk-main-osc";
 127                                         #clock-cells = <0>;
 128                                         interrupts-extended = <&pmc AT91_PMC_MOSCS>;
 129                                         clocks = <&main_xtal>;
 130                                 };
 131
 132                                 main: mainck {
 133                                         compatible = "atmel,at91rm9200-clk-main";
 134                                         #clock-cells = <0>;
 135                                         clocks = <&main_osc>;
 136                                 };
 137
 138                                 plla: pllack@0 {
 139                                         compatible = "atmel,at91rm9200-clk-pll";
 140                                         #clock-cells = <0>;
 141                                         interrupts-extended = <&pmc AT91_PMC_LOCKA>;
 142                                         clocks = <&main>;
 143                                         reg = <0>;
 144                                         atmel,clk-input-range = <2000000 32000000>;
 145                                         #atmel,pll-clk-output-range-cells = <4>;
 146                                         atmel,pll-clk-output-ranges = <745000000 800000000 0 0
 147                                                                        695000000 750000000 1 0
 148                                                                        645000000 700000000 2 0
 149                                                                        595000000 650000000 3 0
 150                                                                        545000000 600000000 0 1
 151                                                                        495000000 555000000 1 1
 152                                                                        445000000 500000000 2 1
 153                                                                        400000000 450000000 3 1>;
 154                                 };
 155
 156                                 plladiv: plladivck {
 157                                         compatible = "atmel,at91sam9x5-clk-plldiv";
 158                                         #clock-cells = <0>;
 159                                         clocks = <&plla>;
 160                                 };
 161
 162                                 utmi: utmick {
 163                                         compatible = "atmel,at91sam9x5-clk-utmi";
 164                                         #clock-cells = <0>;
 165                                         interrupts-extended = <&pmc AT91_PMC_LOCKU>;
 166                                         clocks = <&main>;
 167                                 };
 168
 169                                 mck: masterck {
 170                                         compatible = "atmel,at91rm9200-clk-master";
 171                                         #clock-cells = <0>;
 172                                         interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
 173                                         clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
 174                                         atmel,clk-output-range = <0 133333333>;
 175                                         atmel,clk-divisors = <1 2 4 3>;
 176                                         u-boot,dm-pre-reloc;
 177                                 };
 178
 179                                 usb: usbck {
 180                                         compatible = "atmel,at91sam9x5-clk-usb";
 181                                         #clock-cells = <0>;
 182                                         clocks = <&plladiv>, <&utmi>;
 183                                 };
 184
 185                                 prog: progck {
 186                                         compatible = "atmel,at91sam9g45-clk-programmable";
 187                                         #address-cells = <1>;
 188                                         #size-cells = <0>;
 189                                         interrupt-parent = <&pmc>;
 190                                         clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
 191
 192                                         prog0: prog@0 {
 193                                                 #clock-cells = <0>;
 194                                                 reg = <0>;
 195                                                 interrupts = <AT91_PMC_PCKRDY(0)>;
 196                                         };
 197
 198                                         prog1: prog@1 {
 199                                                 #clock-cells = <0>;
 200                                                 reg = <1>;
 201                                                 interrupts = <AT91_PMC_PCKRDY(1)>;
 202                                         };
 203                                 };
 204
 205                                 systemck {
 206                                         compatible = "atmel,at91rm9200-clk-system";
 207                                         #address-cells = <1>;
 208                                         #size-cells = <0>;
 209
 210                                         ddrck: ddrck@2 {
 211                                                 #clock-cells = <0>;
 212                                                 reg = <2>;
 213                                                 clocks = <&mck>;
 214                                         };
 215
 216                                         uhpck: uhpck@6 {
 217                                                 #clock-cells = <0>;
 218                                                 reg = <6>;
 219                                                 clocks = <&usb>;
 220                                         };
 221
 222                                         pck0: pck0@8 {
 223                                                 #clock-cells = <0>;
 224                                                 reg = <8>;
 225                                                 clocks = <&prog0>;
 226                                         };
 227
 228                                         pck1: pck1@9 {
 229                                                 #clock-cells = <0>;
 230                                                 reg = <9>;
 231                                                 clocks = <&prog1>;
 232                                         };
 233                                 };
 234
 235                                 periphck {
 236                                         compatible = "atmel,at91rm9200-clk-peripheral";
 237                                         #address-cells = <1>;
 238                                         #size-cells = <0>;
 239                                         clocks = <&mck>;
 240
 241                                         pioA_clk: pioA_clk@2 {
 242                                                 #clock-cells = <0>;
 243                                                 reg = <2>;
 244                                         };
 245
 246                                         pioB_clk: pioB_clk@3 {
 247                                                 #clock-cells = <0>;
 248                                                 reg = <3>;
 249                                         };
 250
 251                                         pioC_clk: pioC_clk@4 {
 252                                                 #clock-cells = <0>;
 253                                                 reg = <4>;
 254                                         };
 255
 256                                         pioDE_clk: pioDE_clk@5 {
 257                                                 #clock-cells = <0>;
 258                                                 reg = <5>;
 259                                         };
 260
 261                                         trng_clk: trng_clk@6 {
 262                                                 #clock-cells = <0>;
 263                                                 reg = <6>;
 264                                         };
 265
 266                                         usart0_clk: usart0_clk@7 {
 267                                                 #clock-cells = <0>;
 268                                                 reg = <7>;
 269                                         };
 270
 271                                         usart1_clk: usart1_clk@8 {
 272                                                 #clock-cells = <0>;
 273                                                 reg = <8>;
 274                                         };
 275
 276                                         usart2_clk: usart2_clk@9 {
 277                                                 #clock-cells = <0>;
 278                                                 reg = <9>;
 279                                         };
 280
 281                                         usart3_clk: usart3_clk@10 {
 282                                                 #clock-cells = <0>;
 283                                                 reg = <10>;
 284                                         };
 285
 286                                         mci0_clk: mci0_clk@11 {
 287                                                 #clock-cells = <0>;
 288                                                 reg = <11>;
 289                                         };
 290
 291                                         twi0_clk: twi0_clk@12 {
 292                                                 #clock-cells = <0>;
 293                                                 reg = <12>;
 294                                         };
 295
 296                                         twi1_clk: twi1_clk@13 {
 297                                                 #clock-cells = <0>;
 298                                                 reg = <13>;
 299                                         };
 300
 301                                         spi0_clk: spi0_clk@14 {
 302                                                 #clock-cells = <0>;
 303                                                 reg = <14>;
 304                                         };
 305
 306                                         spi1_clk: spi1_clk@15 {
 307                                                 #clock-cells = <0>;
 308                                                 reg = <15>;
 309                                         };
 310
 311                                         ssc0_clk: ssc0_clk@16 {
 312                                                 #clock-cells = <0>;
 313                                                 reg = <16>;
 314                                         };
 315
 316                                         ssc1_clk: ssc1_clk@17 {
 317                                                 #clock-cells = <0>;
 318                                                 reg = <17>;
 319                                         };
 320
 321                                         tcb0_clk: tcb0_clk@18 {
 322                                                 #clock-cells = <0>;
 323                                                 reg = <18>;
 324                                         };
 325
 326                                         pwm_clk: pwm_clk@19 {
 327                                                 #clock-cells = <0>;
 328                                                 reg = <19>;
 329                                         };
 330
 331                                         adc_clk: adc_clk@20 {
 332                                                 #clock-cells = <0>;
 333                                                 reg = <20>;
 334                                         };
 335
 336                                         dma0_clk: dma0_clk@21 {
 337                                                 #clock-cells = <0>;
 338                                                 reg = <21>;
 339                                         };
 340
 341                                         uhphs_clk: uhphs_clk@22 {
 342                                                 #clock-cells = <0>;
 343                                                 reg = <22>;
 344                                         };
 345
 346                                         lcd_clk: lcd_clk@23 {
 347                                                 #clock-cells = <0>;
 348                                                 reg = <23>;
 349                                         };
 350
 351                                         ac97_clk: ac97_clk@24 {
 352                                                 #clock-cells = <0>;
 353                                                 reg = <24>;
 354                                         };
 355
 356                                         macb0_clk: macb0_clk@25 {
 357                                                 #clock-cells = <0>;
 358                                                 reg = <25>;
 359                                         };
 360
 361                                         isi_clk: isi_clk@26 {
 362                                                 #clock-cells = <0>;
 363                                                 reg = <26>;
 364                                         };
 365
 366                                         udphs_clk: udphs_clk@27 {
 367                                                 #clock-cells = <0>;
 368                                                 reg = <27>;
 369                                         };
 370
 371                                         aestdessha_clk: aestdessha_clk@28 {
 372                                                 #clock-cells = <0>;
 373                                                 reg = <28>;
 374                                         };
 375
 376                                         mci1_clk: mci1_clk@29 {
 377                                                 #clock-cells = <0>;
 378                                                 reg = <29>;
 379                                         };
 380
 381                                         vdec_clk: vdec_clk@30 {
 382                                                 #clock-cells = <0>;
 383                                                 reg = <30>;
 384                                         };
 385                                 };
 386                         };
 387
 388                         rstc@fffffd00 {
 389                                 compatible = "atmel,at91sam9g45-rstc";
 390                                 reg = <0xfffffd00 0x10>;
 391                                 clocks = <&clk32k>;
 392                         };
 393
 394                         pit: timer@fffffd30 {
 395                                 compatible = "atmel,at91sam9260-pit";
 396                                 reg = <0xfffffd30 0xf>;
 397                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 398                                 clocks = <&mck>;
 399                         };
 400
 401
 402                         shdwc@fffffd10 {
 403                                 compatible = "atmel,at91sam9rl-shdwc";
 404                                 reg = <0xfffffd10 0x10>;
 405                                 clocks = <&clk32k>;
 406                         };
 407
 408                         tcb0: timer@fff7c000 {
 409                                 compatible = "atmel,at91rm9200-tcb";
 410                                 reg = <0xfff7c000 0x100>;
 411                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
 412                                 clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
 413                                 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 414                         };
 415
 416                         tcb1: timer@fffd4000 {
 417                                 compatible = "atmel,at91rm9200-tcb";
 418                                 reg = <0xfffd4000 0x100>;
 419                                 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
 420                                 clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
 421                                 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 422                         };
 423
 424                         dma: dma-controller@ffffec00 {
 425                                 compatible = "atmel,at91sam9g45-dma";
 426                                 reg = <0xffffec00 0x200>;
 427                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 428                                 #dma-cells = <2>;
 429                                 clocks = <&dma0_clk>;
 430                                 clock-names = "dma_clk";
 431                         };
 432
 433                         pinctrl@fffff200 {
 434                                 #address-cells = <1>;
 435                                 #size-cells = <1>;
 436                                 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
 437                                 ranges = <0xfffff200 0xfffff200 0xa00>;
 438                                 reg = <0xfffff200 0x200
 439                                        0xfffff400 0x200
 440                                        0xfffff600 0x200
 441                                        0xfffff800 0x200
 442                                        0xfffffa00 0x200
 443                                       >;
 444                                 u-boot,dm-pre-reloc;
 445
 446                                 atmel,mux-mask = <
 447                                       /*    A         B     */
 448                                        0xffffffff 0xffc003ff  /* pioA */
 449                                        0xffffffff 0x800f8f00  /* pioB */
 450                                        0xffffffff 0x00000e00  /* pioC */
 451                                        0xffffffff 0xff0c1381  /* pioD */
 452                                        0xffffffff 0x81ffff81  /* pioE */
 453                                       >;
 454
 455                                 /* shared pinctrl settings */
 456                                 adc0 {
 457                                         pinctrl_adc0_adtrg: adc0_adtrg {
 458                                                 atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 459                                         };
 460                                         pinctrl_adc0_ad0: adc0_ad0 {
 461                                                 atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 462                                         };
 463                                         pinctrl_adc0_ad1: adc0_ad1 {
 464                                                 atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 465                                         };
 466                                         pinctrl_adc0_ad2: adc0_ad2 {
 467                                                 atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 468                                         };
 469                                         pinctrl_adc0_ad3: adc0_ad3 {
 470                                                 atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 471                                         };
 472                                         pinctrl_adc0_ad4: adc0_ad4 {
 473                                                 atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 474                                         };
 475                                         pinctrl_adc0_ad5: adc0_ad5 {
 476                                                 atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 477                                         };
 478                                         pinctrl_adc0_ad6: adc0_ad6 {
 479                                                 atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 480                                         };
 481                                         pinctrl_adc0_ad7: adc0_ad7 {
 482                                                 atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 483                                         };
 484                                 };
 485
 486                                 dbgu {
 487                                         u-boot,dm-pre-reloc;
 488                                         pinctrl_dbgu: dbgu-0 {
 489                                                 atmel,pins =
 490                                                         <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 491                                                          AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 492                                         };
 493                                 };
 494
 495                                 i2c0 {
 496                                         pinctrl_i2c0: i2c0-0 {
 497                                                 atmel,pins =
 498                                                         <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA21 periph A TWCK0 */
 499                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A TWD0 */
 500                                         };
 501                                 };
 502
 503                                 i2c1 {
 504                                         pinctrl_i2c1: i2c1-0 {
 505                                                 atmel,pins =
 506                                                         <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB11 periph A TWCK1 */
 507                                                          AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A TWD1 */
 508                                         };
 509                                 };
 510
 511                                 isi {
 512                                         pinctrl_isi_data_0_7: isi-0-data-0-7 {
 513                                                 atmel,pins =
 514                                                         <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
 515                                                         AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
 516                                                         AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
 517                                                         AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
 518                                                         AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
 519                                                         AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
 520                                                         AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
 521                                                         AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
 522                                                         AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
 523                                                         AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
 524                                                         AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
 525                                         };
 526
 527                                         pinctrl_isi_data_8_9: isi-0-data-8-9 {
 528                                                 atmel,pins =
 529                                                         <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
 530                                                         AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
 531                                         };
 532
 533                                         pinctrl_isi_data_10_11: isi-0-data-10-11 {
 534                                                 atmel,pins =
 535                                                         <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
 536                                                         AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
 537                                         };
 538                                 };
 539
 540                                 usart0 {
 541                                         pinctrl_usart0: usart0-0 {
 542                                                 atmel,pins =
 543                                                         <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB19 periph A with pullup */
 544                                                          AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */
 545                                         };
 546
 547                                         pinctrl_usart0_rts: usart0_rts-0 {
 548                                                 atmel,pins =
 549                                                         <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB17 periph B */
 550                                         };
 551
 552                                         pinctrl_usart0_cts: usart0_cts-0 {
 553                                                 atmel,pins =
 554                                                         <AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B */
 555                                         };
 556                                 };
 557
 558                                 uart1 {
 559                                         pinctrl_usart1: usart1-0 {
 560                                                 atmel,pins =
 561                                                         <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */
 562                                                          AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB5 periph A */
 563                                         };
 564
 565                                         pinctrl_usart1_rts: usart1_rts-0 {
 566                                                 atmel,pins =
 567                                                         <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A */
 568                                         };
 569
 570                                         pinctrl_usart1_cts: usart1_cts-0 {
 571                                                 atmel,pins =
 572                                                         <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD17 periph A */
 573                                         };
 574                                 };
 575
 576                                 usart2 {
 577                                         pinctrl_usart2: usart2-0 {
 578                                                 atmel,pins =
 579                                                         <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */
 580                                                          AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB7 periph A */
 581                                         };
 582
 583                                         pinctrl_usart2_rts: usart2_rts-0 {
 584                                                 atmel,pins =
 585                                                         <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PC9 periph B */
 586                                         };
 587
 588                                         pinctrl_usart2_cts: usart2_cts-0 {
 589                                                 atmel,pins =
 590                                                         <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC11 periph B */
 591                                         };
 592                                 };
 593
 594                                 usart3 {
 595                                         pinctrl_usart3: usart3-0 {
 596                                                 atmel,pins =
 597                                                         <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */
 598                                                          AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB8 periph A */
 599                                         };
 600
 601                                         pinctrl_usart3_rts: usart3_rts-0 {
 602                                                 atmel,pins =
 603                                                         <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B */
 604                                         };
 605
 606                                         pinctrl_usart3_cts: usart3_cts-0 {
 607                                                 atmel,pins =
 608                                                         <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA24 periph B */
 609                                         };
 610                                 };
 611
 612                                 nand {
 613                                         pinctrl_nand: nand-0 {
 614                                                 atmel,pins =
 615                                                         <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PC8 gpio RDY pin pull_up*/
 616                                                          AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PC14 gpio enable pin pull_up */
 617                                         };
 618                                 };
 619
 620                                 macb {
 621                                         pinctrl_macb_rmii: macb_rmii-0 {
 622                                                 atmel,pins =
 623                                                         <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA10 periph A */
 624                                                          AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA11 periph A */
 625                                                          AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A */
 626                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA13 periph A */
 627                                                          AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA14 periph A */
 628                                                          AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA15 periph A */
 629                                                          AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA16 periph A */
 630                                                          AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
 631                                                          AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA18 periph A */
 632                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA19 periph A */
 633                                         };
 634
 635                                         pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
 636                                                 atmel,pins =
 637                                                         <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA6 periph B */
 638                                                          AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA7 periph B */
 639                                                          AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA8 periph B */
 640                                                          AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA9 periph B */
 641                                                          AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 642                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 643                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA29 periph B */
 644                                                          AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */
 645                                         };
 646                                 };
 647
 648                                 mmc0 {
 649                                         pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 650                                                 atmel,pins =
 651                                                         <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PA0 periph A */
 652                                                          AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
 653                                                          AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA2 periph A with pullup */
 654                                         };
 655
 656                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 657                                                 atmel,pins =
 658                                                         <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */
 659                                                          AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */
 660                                                          AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA5 periph A with pullup */
 661                                         };
 662
 663                                         pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
 664                                                 atmel,pins =
 665                                                         <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */
 666                                                          AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
 667                                                          AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */
 668                                                          AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA9 periph A with pullup */
 669                                         };
 670                                 };
 671
 672                                 mmc1 {
 673                                         pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
 674                                                 atmel,pins =
 675                                                         <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA31 periph A */
 676                                                          AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA22 periph A with pullup */
 677                                                          AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA23 periph A with pullup */
 678                                         };
 679
 680                                         pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
 681                                                 atmel,pins =
 682                                                         <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA24 periph A with pullup */
 683                                                          AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA25 periph A with pullup */
 684                                                          AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA26 periph A with pullup */
 685                                         };
 686
 687                                         pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
 688                                                 atmel,pins =
 689                                                         <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA27 periph A with pullup */
 690                                                          AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA28 periph A with pullup */
 691                                                          AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA29 periph A with pullup */
 692                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA30 periph A with pullup */
 693                                         };
 694                                 };
 695
 696                                 ssc0 {
 697                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 698                                                 atmel,pins =
 699                                                         <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD0 periph A */
 700                                                          AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD1 periph A */
 701                                                          AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PD2 periph A */
 702                                         };
 703
 704                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 705                                                 atmel,pins =
 706                                                         <AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD3 periph A */
 707                                                          AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD4 periph A */
 708                                                          AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PD5 periph A */
 709                                         };
 710                                 };
 711
 712                                 ssc1 {
 713                                         pinctrl_ssc1_tx: ssc1_tx-0 {
 714                                                 atmel,pins =
 715                                                         <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD10 periph A */
 716                                                          AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD11 periph A */
 717                                                          AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A */
 718                                         };
 719
 720                                         pinctrl_ssc1_rx: ssc1_rx-0 {
 721                                                 atmel,pins =
 722                                                         <AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD13 periph A */
 723                                                          AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD14 periph A */
 724                                                          AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD15 periph A */
 725                                         };
 726                                 };
 727
 728                                 spi0 {
 729                                         pinctrl_spi0: spi0-0 {
 730                                                 atmel,pins =
 731                                                         <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB0 periph A SPI0_MISO pin */
 732                                                          AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB1 periph A SPI0_MOSI pin */
 733                                                          AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB2 periph A SPI0_SPCK pin */
 734                                         };
 735                                 };
 736
 737                                 spi1 {
 738                                         pinctrl_spi1: spi1-0 {
 739                                                 atmel,pins =
 740                                                         <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB14 periph A SPI1_MISO pin */
 741                                                          AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB15 periph A SPI1_MOSI pin */
 742                                                          AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB16 periph A SPI1_SPCK pin */
 743                                         };
 744                                 };
 745
 746                                 tcb0 {
 747                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 748                                                 atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 749                                         };
 750
 751                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
 752                                                 atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 753                                         };
 754
 755                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
 756                                                 atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 757                                         };
 758
 759                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
 760                                                 atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 761                                         };
 762
 763                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
 764                                                 atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 765                                         };
 766
 767                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
 768                                                 atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 769                                         };
 770
 771                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
 772                                                 atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 773                                         };
 774
 775                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
 776                                                 atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 777                                         };
 778
 779                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 780                                                 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 781                                         };
 782                                 };
 783
 784                                 tcb1 {
 785                                         pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
 786                                                 atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 787                                         };
 788
 789                                         pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
 790                                                 atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 791                                         };
 792
 793                                         pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
 794                                                 atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 795                                         };
 796
 797                                         pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
 798                                                 atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 799                                         };
 800
 801                                         pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
 802                                                 atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 803                                         };
 804
 805                                         pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
 806                                                 atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 807                                         };
 808
 809                                         pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
 810                                                 atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 811                                         };
 812
 813                                         pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
 814                                                 atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 815                                         };
 816
 817                                         pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
 818                                                 atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 819                                         };
 820                                 };
 821
 822                                 fb {
 823                                         pinctrl_fb: fb-0 {
 824                                                 atmel,pins =
 825                                                         <AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE0 periph A */
 826                                                          AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE2 periph A */
 827                                                          AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE3 periph A */
 828                                                          AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE4 periph A */
 829                                                          AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE5 periph A */
 830                                                          AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE6 periph A */
 831                                                          AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE7 periph A */
 832                                                          AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE8 periph A */
 833                                                          AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE9 periph A */
 834                                                          AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE10 periph A */
 835                                                          AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE11 periph A */
 836                                                          AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE12 periph A */
 837                                                          AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE13 periph A */
 838                                                          AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE14 periph A */
 839                                                          AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE15 periph A */
 840                                                          AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE16 periph A */
 841                                                          AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE17 periph A */
 842                                                          AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE18 periph A */
 843                                                          AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE19 periph A */
 844                                                          AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE20 periph A */
 845                                                          AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE21 periph A */
 846                                                          AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE22 periph A */
 847                                                          AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE23 periph A */
 848                                                          AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE24 periph A */
 849                                                          AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE25 periph A */
 850                                                          AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE26 periph A */
 851                                                          AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE27 periph A */
 852                                                          AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE28 periph A */
 853                                                          AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE29 periph A */
 854                                                          AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */
 855                                         };
 856                                 };
 857                         };
 858
 859                         pioA: gpio@fffff200 {
 860                                 compatible = "atmel,at91rm9200-gpio";
 861                                 reg = <0xfffff200 0x200>;
 862                                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 863                                 #gpio-cells = <2>;
 864                                 gpio-controller;
 865                                 interrupt-controller;
 866                                 #interrupt-cells = <2>;
 867                                 clocks = <&pioA_clk>;
 868                         };
 869
 870                         pioB: gpio@fffff400 {
 871                                 compatible = "atmel,at91rm9200-gpio";
 872                                 reg = <0xfffff400 0x200>;
 873                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 874                                 #gpio-cells = <2>;
 875                                 gpio-controller;
 876                                 interrupt-controller;
 877                                 #interrupt-cells = <2>;
 878                                 clocks = <&pioB_clk>;
 879                         };
 880
 881                         pioC: gpio@fffff600 {
 882                                 compatible = "atmel,at91rm9200-gpio";
 883                                 reg = <0xfffff600 0x200>;
 884                                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 885                                 #gpio-cells = <2>;
 886                                 gpio-controller;
 887                                 interrupt-controller;
 888                                 #interrupt-cells = <2>;
 889                                 clocks = <&pioC_clk>;
 890                         };
 891
 892                         pioD: gpio@fffff800 {
 893                                 compatible = "atmel,at91rm9200-gpio";
 894                                 reg = <0xfffff800 0x200>;
 895                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
 896                                 #gpio-cells = <2>;
 897                                 gpio-controller;
 898                                 interrupt-controller;
 899                                 #interrupt-cells = <2>;
 900                                 clocks = <&pioDE_clk>;
 901                         };
 902
 903                         pioE: gpio@fffffa00 {
 904                                 compatible = "atmel,at91rm9200-gpio";
 905                                 reg = <0xfffffa00 0x200>;
 906                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
 907                                 #gpio-cells = <2>;
 908                                 gpio-controller;
 909                                 interrupt-controller;
 910                                 #interrupt-cells = <2>;
 911                                 clocks = <&pioDE_clk>;
 912                         };
 913
 914                         dbgu: serial@ffffee00 {
 915                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 916                                 reg = <0xffffee00 0x200>;
 917                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 918                                 pinctrl-names = "default";
 919                                 pinctrl-0 = <&pinctrl_dbgu>;
 920                                 clocks = <&mck>;
 921                                 clock-names = "usart";
 922                                 status = "disabled";
 923                         };
 924
 925                         usart0: serial@fff8c000 {
 926                                 compatible = "atmel,at91sam9260-usart";
 927                                 reg = <0xfff8c000 0x200>;
 928                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 929                                 atmel,use-dma-rx;
 930                                 atmel,use-dma-tx;
 931                                 pinctrl-names = "default";
 932                                 pinctrl-0 = <&pinctrl_usart0>;
 933                                 clocks = <&usart0_clk>;
 934                                 clock-names = "usart";
 935                                 status = "disabled";
 936                         };
 937
 938                         usart1: serial@fff90000 {
 939                                 compatible = "atmel,at91sam9260-usart";
 940                                 reg = <0xfff90000 0x200>;
 941                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 942                                 atmel,use-dma-rx;
 943                                 atmel,use-dma-tx;
 944                                 pinctrl-names = "default";
 945                                 pinctrl-0 = <&pinctrl_usart1>;
 946                                 clocks = <&usart1_clk>;
 947                                 clock-names = "usart";
 948                                 status = "disabled";
 949                         };
 950
 951                         usart2: serial@fff94000 {
 952                                 compatible = "atmel,at91sam9260-usart";
 953                                 reg = <0xfff94000 0x200>;
 954                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 955                                 atmel,use-dma-rx;
 956                                 atmel,use-dma-tx;
 957                                 pinctrl-names = "default";
 958                                 pinctrl-0 = <&pinctrl_usart2>;
 959                                 clocks = <&usart2_clk>;
 960                                 clock-names = "usart";
 961                                 status = "disabled";
 962                         };
 963
 964                         usart3: serial@fff98000 {
 965                                 compatible = "atmel,at91sam9260-usart";
 966                                 reg = <0xfff98000 0x200>;
 967                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
 968                                 atmel,use-dma-rx;
 969                                 atmel,use-dma-tx;
 970                                 pinctrl-names = "default";
 971                                 pinctrl-0 = <&pinctrl_usart3>;
 972                                 clocks = <&usart3_clk>;
 973                                 clock-names = "usart";
 974                                 status = "disabled";
 975                         };
 976
 977                         macb0: ethernet@fffbc000 {
 978                                 compatible = "cdns,at91sam9260-macb", "cdns,macb";
 979                                 reg = <0xfffbc000 0x100>;
 980                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
 981                                 pinctrl-names = "default";
 982                                 pinctrl-0 = <&pinctrl_macb_rmii>;
 983                                 clocks = <&macb0_clk>, <&macb0_clk>;
 984                                 clock-names = "hclk", "pclk";
 985                                 status = "disabled";
 986                         };
 987
 988                         trng@fffcc000 {
 989                                 compatible = "atmel,at91sam9g45-trng";
 990                                 reg = <0xfffcc000 0x100>;
 991                                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
 992                                 clocks = <&trng_clk>;
 993                         };
 994
 995                         i2c0: i2c@fff84000 {
 996                                 compatible = "atmel,at91sam9g10-i2c";
 997                                 reg = <0xfff84000 0x100>;
 998                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
 999                                 pinctrl-names = "default";
1000                                 pinctrl-0 = <&pinctrl_i2c0>;
1001                                 #address-cells = <1>;
1002                                 #size-cells = <0>;
1003                                 clocks = <&twi0_clk>;
1004                                 status = "disabled";
1005                         };
1006
1007                         i2c1: i2c@fff88000 {
1008                                 compatible = "atmel,at91sam9g10-i2c";
1009                                 reg = <0xfff88000 0x100>;
1010                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
1011                                 pinctrl-names = "default";
1012                                 pinctrl-0 = <&pinctrl_i2c1>;
1013                                 #address-cells = <1>;
1014                                 #size-cells = <0>;
1015                                 clocks = <&twi1_clk>;
1016                                 status = "disabled";
1017                         };
1018
1019                         ssc0: ssc@fff9c000 {
1020                                 compatible = "atmel,at91sam9g45-ssc";
1021                                 reg = <0xfff9c000 0x4000>;
1022                                 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
1023                                 pinctrl-names = "default";
1024                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
1025                                 clocks = <&ssc0_clk>;
1026                                 clock-names = "pclk";
1027                                 status = "disabled";
1028                         };
1029
1030                         ssc1: ssc@fffa0000 {
1031                                 compatible = "atmel,at91sam9g45-ssc";
1032                                 reg = <0xfffa0000 0x4000>;
1033                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
1034                                 pinctrl-names = "default";
1035                                 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
1036                                 clocks = <&ssc1_clk>;
1037                                 clock-names = "pclk";
1038                                 status = "disabled";
1039                         };
1040
1041                         adc0: adc@fffb0000 {
1042                                 compatible = "atmel,at91sam9g45-adc";
1043                                 reg = <0xfffb0000 0x100>;
1044                                 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
1045                                 clocks = <&adc_clk>, <&adc_op_clk>;
1046                                 clock-names = "adc_clk", "adc_op_clk";
1047                                 atmel,adc-channels-used = <0xff>;
1048                                 atmel,adc-vref = <3300>;
1049                                 atmel,adc-startup-time = <40>;
1050                                 atmel,adc-res = <8 10>;
1051                                 atmel,adc-res-names = "lowres", "highres";
1052                                 atmel,adc-use-res = "highres";
1053
1054                                 trigger0 {
1055                                         trigger-name = "external-rising";
1056                                         trigger-value = <0x1>;
1057                                         trigger-external;
1058                                 };
1059                                 trigger1 {
1060                                         trigger-name = "external-falling";
1061                                         trigger-value = <0x2>;
1062                                         trigger-external;
1063                                 };
1064
1065                                 trigger2 {
1066                                         trigger-name = "external-any";
1067                                         trigger-value = <0x3>;
1068                                         trigger-external;
1069                                 };
1070
1071                                 trigger3 {
1072                                         trigger-name = "continuous";
1073                                         trigger-value = <0x6>;
1074                                 };
1075                         };
1076
1077                         isi@fffb4000 {
1078                                 compatible = "atmel,at91sam9g45-isi";
1079                                 reg = <0xfffb4000 0x4000>;
1080                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
1081                                 clocks = <&isi_clk>;
1082                                 clock-names = "isi_clk";
1083                                 status = "disabled";
1084                         };
1085
1086                         pwm0: pwm@fffb8000 {
1087                                 compatible = "atmel,at91sam9rl-pwm";
1088                                 reg = <0xfffb8000 0x300>;
1089                                 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
1090                                 #pwm-cells = <3>;
1091                                 clocks = <&pwm_clk>;
1092                                 status = "disabled";
1093                         };
1094
1095                         mmc0: mmc@fff80000 {
1096                                 compatible = "atmel,hsmci";
1097                                 reg = <0xfff80000 0x600>;
1098                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
1099                                 pinctrl-names = "default";
1100                                 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
1101                                 dma-names = "rxtx";
1102                                 #address-cells = <1>;
1103                                 #size-cells = <0>;
1104                                 clocks = <&mci0_clk>;
1105                                 clock-names = "mci_clk";
1106                                 status = "disabled";
1107                         };
1108
1109                         mmc1: mmc@fffd0000 {
1110                                 compatible = "atmel,hsmci";
1111                                 reg = <0xfffd0000 0x600>;
1112                                 interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
1113                                 pinctrl-names = "default";
1114                                 dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
1115                                 dma-names = "rxtx";
1116                                 #address-cells = <1>;
1117                                 #size-cells = <0>;
1118                                 clocks = <&mci1_clk>;
1119                                 clock-names = "mci_clk";
1120                                 status = "disabled";
1121                         };
1122
1123                         watchdog@fffffd40 {
1124                                 compatible = "atmel,at91sam9260-wdt";
1125                                 reg = <0xfffffd40 0x10>;
1126                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1127                                 clocks = <&clk32k>;
1128                                 atmel,watchdog-type = "hardware";
1129                                 atmel,reset-type = "all";
1130                                 atmel,dbg-halt;
1131                                 status = "disabled";
1132                         };
1133
1134                         spi0: spi@fffa4000 {
1135                                 #address-cells = <1>;
1136                                 #size-cells = <0>;
1137                                 compatible = "atmel,at91rm9200-spi";
1138                                 reg = <0xfffa4000 0x200>;
1139                                 interrupts = <14 4 3>;
1140                                 pinctrl-names = "default";
1141                                 pinctrl-0 = <&pinctrl_spi0>;
1142                                 clocks = <&spi0_clk>;
1143                                 clock-names = "spi_clk";
1144                                 status = "disabled";
1145                         };
1146
1147                         spi1: spi@fffa8000 {
1148                                 #address-cells = <1>;
1149                                 #size-cells = <0>;
1150                                 compatible = "atmel,at91rm9200-spi";
1151                                 reg = <0xfffa8000 0x200>;
1152                                 interrupts = <15 4 3>;
1153                                 pinctrl-names = "default";
1154                                 pinctrl-0 = <&pinctrl_spi1>;
1155                                 clocks = <&spi1_clk>;
1156                                 clock-names = "spi_clk";
1157                                 status = "disabled";
1158                         };
1159
1160                         usb2: gadget@fff78000 {
1161                                 #address-cells = <1>;
1162                                 #size-cells = <0>;
1163                                 compatible = "atmel,at91sam9g45-udc";
1164                                 reg = <0x00600000 0x80000
1165                                        0xfff78000 0x400>;
1166                                 interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
1167                                 clocks = <&udphs_clk>, <&utmi>;
1168                                 clock-names = "pclk", "hclk";
1169                                 status = "disabled";
1170
1171                                 ep@0 {
1172                                         reg = <0>;
1173                                         atmel,fifo-size = <64>;
1174                                         atmel,nb-banks = <1>;
1175                                 };
1176
1177                                 ep@1 {
1178                                         reg = <1>;
1179                                         atmel,fifo-size = <1024>;
1180                                         atmel,nb-banks = <2>;
1181                                         atmel,can-dma;
1182                                         atmel,can-isoc;
1183                                 };
1184
1185                                 ep@2 {
1186                                         reg = <2>;
1187                                         atmel,fifo-size = <1024>;
1188                                         atmel,nb-banks = <2>;
1189                                         atmel,can-dma;
1190                                         atmel,can-isoc;
1191                                 };
1192
1193                                 ep@3 {
1194                                         reg = <3>;
1195                                         atmel,fifo-size = <1024>;
1196                                         atmel,nb-banks = <3>;
1197                                         atmel,can-dma;
1198                                 };
1199
1200                                 ep@4 {
1201                                         reg = <4>;
1202                                         atmel,fifo-size = <1024>;
1203                                         atmel,nb-banks = <3>;
1204                                         atmel,can-dma;
1205                                 };
1206
1207                                 ep@5 {
1208                                         reg = <5>;
1209                                         atmel,fifo-size = <1024>;
1210                                         atmel,nb-banks = <3>;
1211                                         atmel,can-dma;
1212                                         atmel,can-isoc;
1213                                 };
1214
1215                                 ep@6 {
1216                                         reg = <6>;
1217                                         atmel,fifo-size = <1024>;
1218                                         atmel,nb-banks = <3>;
1219                                         atmel,can-dma;
1220                                         atmel,can-isoc;
1221                                 };
1222                         };
1223
1224                         sckc@fffffd50 {
1225                                 compatible = "atmel,at91sam9x5-sckc";
1226                                 reg = <0xfffffd50 0x4>;
1227
1228                                 slow_osc: slow_osc {
1229                                         compatible = "atmel,at91sam9x5-clk-slow-osc";
1230                                         #clock-cells = <0>;
1231                                         atmel,startup-time-usec = <1200000>;
1232                                         clocks = <&slow_xtal>;
1233                                 };
1234
1235                                 slow_rc_osc: slow_rc_osc {
1236                                         compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
1237                                         #clock-cells = <0>;
1238                                         atmel,startup-time-usec = <75>;
1239                                         clock-frequency = <32768>;
1240                                         clock-accuracy = <50000000>;
1241                                 };
1242
1243                                 clk32k: slck {
1244                                         compatible = "atmel,at91sam9x5-clk-slow";
1245                                         #clock-cells = <0>;
1246                                         clocks = <&slow_rc_osc &slow_osc>;
1247                                 };
1248                         };
1249
1250                         rtc@fffffd20 {
1251                                 compatible = "atmel,at91sam9260-rtt";
1252                                 reg = <0xfffffd20 0x10>;
1253                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1254                                 clocks = <&clk32k>;
1255                                 status = "disabled";
1256                         };
1257
1258                         rtc@fffffdb0 {
1259                                 compatible = "atmel,at91rm9200-rtc";
1260                                 reg = <0xfffffdb0 0x30>;
1261                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1262                                 clocks = <&clk32k>;
1263                                 status = "disabled";
1264                         };
1265
1266                         gpbr: syscon@fffffd60 {
1267                                 compatible = "atmel,at91sam9260-gpbr", "syscon";
1268                                 reg = <0xfffffd60 0x10>;
1269                                 status = "disabled";
1270                         };
1271                 };
1272
1273                 fb0: fb@0x00500000 {
1274                         compatible = "atmel,at91sam9g45-lcdc";
1275                         reg = <0x00500000 0x1000>;
1276                         interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
1277                         pinctrl-names = "default";
1278                         pinctrl-0 = <&pinctrl_fb>;
1279                         clocks = <&lcd_clk>, <&lcd_clk>;
1280                         clock-names = "hclk", "lcdc_clk";
1281                         status = "disabled";
1282                 };
1283
1284                 nand0: nand@40000000 {
1285                         compatible = "atmel,at91rm9200-nand";
1286                         #address-cells = <1>;
1287                         #size-cells = <1>;
1288                         reg = <0x40000000 0x10000000
1289                                0xffffe200 0x200
1290                               >;
1291                         atmel,nand-addr-offset = <21>;
1292                         atmel,nand-cmd-offset = <22>;
1293                         atmel,nand-has-dma;
1294                         pinctrl-names = "default";
1295                         pinctrl-0 = <&pinctrl_nand>;
1296                         gpios = <&pioC 8 GPIO_ACTIVE_HIGH
1297                                  &pioC 14 GPIO_ACTIVE_HIGH
1298                                  0
1299                                 >;
1300                         status = "disabled";
1301                 };
1302
1303                 usb0: ohci@00700000 {
1304                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1305                         reg = <0x00700000 0x100000>;
1306                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
1307                         clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
1308                         clock-names = "ohci_clk", "hclk", "uhpck";
1309                         status = "disabled";
1310                 };
1311
1312                 usb1: ehci@00800000 {
1313                         compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
1314                         reg = <0x00800000 0x100000>;
1315                         interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
1316                         clocks = <&utmi>, <&uhphs_clk>;
1317                         clock-names = "usb_clk", "ehci_clk";
1318                         status = "disabled";
1319                 };
1320         };
1321
1322         i2c-gpio-0 {
1323                 compatible = "i2c-gpio";
1324                 gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
1325                          &pioA 21 GPIO_ACTIVE_HIGH /* scl */
1326                         >;
1327                 i2c-gpio,sda-open-drain;
1328                 i2c-gpio,scl-open-drain;
1329                 i2c-gpio,delay-us = <5>;        /* ~100 kHz */
1330                 #address-cells = <1>;
1331                 #size-cells = <0>;
1332                 status = "disabled";
1333         };
1334 };