arch/arm/dts/at91sam9g25ek.dts

   1 /*
   2  * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
   3  *
   4  *  Copyright (C) 2012 Atmel,
   5  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
   6  *
   7  * Licensed under GPLv2 or later.
   8  */
   9 /dts-v1/;
  10 #include "at91sam9g25.dtsi"
  11 #include "at91sam9x5ek.dtsi"
  12
  13 / {
  14         model = "Atmel AT91SAM9G25-EK";
  15         compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
  16
  17         ahb {
  18                 apb {
  19                         spi0: spi@f0000000 {
  20                                 status = "disabled";
  21                         };
  22
  23                         mmc1: mmc@f000c000 {
  24                                 status = "disabled";
  25                         };
  26
  27                         i2c0: i2c@f8010000 {
  28                                 ov2640: camera@0x30 {
  29                                         compatible = "ovti,ov2640";
  30                                         reg = <0x30>;
  31                                         pinctrl-names = "default";
  32                                         pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
  33                                         resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
  34                                         pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
  35                                         clocks = <&pck0>;
  36                                         clock-names = "xvclk";
  37                                         assigned-clocks = <&pck0>;
  38                                         assigned-clock-rates = <25000000>;
  39                                         status = "okay";
  40
  41                                         port {
  42                                                 ov2640_0: endpoint {
  43                                                         remote-endpoint = <&isi_0>;
  44                                                         bus-width = <8>;
  45                                                 };
  46                                         };
  47                                 };
  48                         };
  49
  50                         macb0: ethernet@f802c000 {
  51                                 phy-mode = "rmii";
  52                                 status = "okay";
  53                         };
  54
  55                         isi: isi@f8048000 {
  56                                 status = "okay";
  57                                 port {
  58                                         isi_0: endpoint@0 {
  59                                                 reg = <0>;
  60                                                 remote-endpoint = <&ov2640_0>;
  61                                                 bus-width = <8>;
  62                                                 vsync-active = <1>;
  63                                                 hsync-active = <1>;
  64                                         };
  65                                 };
  66                         };
  67                 };
  68         };
  69 };