arch/arm/dts/at91sam9260.dtsi

   1 /*
   2  * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
   3  *
   4  *  Copyright (C) 2011 Atmel,
   5  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
   6  *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
   7  *
   8  * Licensed under GPLv2 or later.
   9  */
  10
  11 #include "skeleton.dtsi"
  12 #include <dt-bindings/pinctrl/at91.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/clock/at91.h>
  16
  17 / {
  18         model = "Atmel AT91SAM9260 family SoC";
  19         compatible = "atmel,at91sam9260";
  20         interrupt-parent = <&aic>;
  21
  22         aliases {
  23                 serial0 = &dbgu;
  24                 serial1 = &usart0;
  25                 serial2 = &usart1;
  26                 serial3 = &usart2;
  27                 serial4 = &usart3;
  28                 serial5 = &uart0;
  29                 serial6 = &uart1;
  30                 gpio0 = &pioA;
  31                 gpio1 = &pioB;
  32                 gpio2 = &pioC;
  33                 tcb0 = &tcb0;
  34                 tcb1 = &tcb1;
  35                 i2c0 = &i2c0;
  36                 ssc0 = &ssc0;
  37                 spi0 = &spi0;
  38         };
  39         cpus {
  40                 #address-cells = <0>;
  41                 #size-cells = <0>;
  42
  43                 cpu {
  44                         compatible = "arm,arm926ej-s";
  45                         device_type = "cpu";
  46                 };
  47         };
  48
  49         memory {
  50                 reg = <0x20000000 0x04000000>;
  51         };
  52
  53         clocks {
  54                 slow_xtal: slow_xtal {
  55                         compatible = "fixed-clock";
  56                         #clock-cells = <0>;
  57                         clock-frequency = <0>;
  58                 };
  59
  60                 main_xtal: main_xtal {
  61                         compatible = "fixed-clock";
  62                         #clock-cells = <0>;
  63                         clock-frequency = <0>;
  64                 };
  65
  66                 adc_op_clk: adc_op_clk{
  67                         compatible = "fixed-clock";
  68                         #clock-cells = <0>;
  69                         clock-frequency = <5000000>;
  70                 };
  71         };
  72
  73         sram0: sram@002ff000 {
  74                 compatible = "mmio-sram";
  75                 reg = <0x002ff000 0x2000>;
  76         };
  77
  78         ahb {
  79                 compatible = "simple-bus";
  80                 #address-cells = <1>;
  81                 #size-cells = <1>;
  82                 ranges;
  83                 u-boot,dm-pre-reloc;
  84
  85                 apb {
  86                         compatible = "simple-bus";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89                         ranges;
  90                         u-boot,dm-pre-reloc;
  91
  92                         aic: interrupt-controller@fffff000 {
  93                                 #interrupt-cells = <3>;
  94                                 compatible = "atmel,at91rm9200-aic";
  95                                 interrupt-controller;
  96                                 reg = <0xfffff000 0x200>;
  97                                 atmel,external-irqs = <29 30 31>;
  98                         };
  99
 100                         ramc0: ramc@ffffea00 {
 101                                 compatible = "atmel,at91sam9260-sdramc";
 102                                 reg = <0xffffea00 0x200>;
 103                         };
 104
 105                         pmc: pmc@fffffc00 {
 106                                 compatible = "atmel,at91sam9260-pmc", "syscon";
 107                                 reg = <0xfffffc00 0x100>;
 108                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 109                                 interrupt-controller;
 110                                 #address-cells = <1>;
 111                                 #size-cells = <0>;
 112                                 #interrupt-cells = <1>;
 113                                 u-boot,dm-pre-reloc;
 114
 115                                 main_osc: main_osc {
 116                                         compatible = "atmel,at91rm9200-clk-main-osc";
 117                                         #clock-cells = <0>;
 118                                         interrupts-extended = <&pmc AT91_PMC_MOSCS>;
 119                                         clocks = <&main_xtal>;
 120                                 };
 121
 122                                 main: mainck {
 123                                         compatible = "atmel,at91rm9200-clk-main";
 124                                         #clock-cells = <0>;
 125                                         clocks = <&main_osc>;
 126                                 };
 127
 128                                 slow_rc_osc: slow_rc_osc {
 129                                         compatible = "fixed-clock";
 130                                         #clock-cells = <0>;
 131                                         clock-frequency = <32768>;
 132                                         clock-accuracy = <50000000>;
 133                                 };
 134
 135                                 clk32k: slck {
 136                                         compatible = "atmel,at91sam9260-clk-slow";
 137                                         #clock-cells = <0>;
 138                                         clocks = <&slow_rc_osc>, <&slow_xtal>;
 139                                 };
 140
 141                                 plla: pllack@0 {
 142                                         compatible = "atmel,at91rm9200-clk-pll";
 143                                         #clock-cells = <0>;
 144                                         interrupts-extended = <&pmc AT91_PMC_LOCKA>;
 145                                         clocks = <&main>;
 146                                         reg = <0>;
 147                                         atmel,clk-input-range = <1000000 32000000>;
 148                                         #atmel,pll-clk-output-range-cells = <4>;
 149                                         atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
 150                                                                 <150000000 240000000 2 1>;
 151                                 };
 152
 153                                 pllb: pllbck@1 {
 154                                         compatible = "atmel,at91rm9200-clk-pll";
 155                                         #clock-cells = <0>;
 156                                         interrupts-extended = <&pmc AT91_PMC_LOCKB>;
 157                                         clocks = <&main>;
 158                                         reg = <1>;
 159                                         atmel,clk-input-range = <1000000 5000000>;
 160                                         #atmel,pll-clk-output-range-cells = <4>;
 161                                         atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
 162                                 };
 163
 164                                 mck: masterck {
 165                                         compatible = "atmel,at91rm9200-clk-master";
 166                                         #clock-cells = <0>;
 167                                         interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
 168                                         clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
 169                                         atmel,clk-output-range = <0 105000000>;
 170                                         atmel,clk-divisors = <1 2 4 0>;
 171                                         u-boot,dm-pre-reloc;
 172                                 };
 173
 174                                 usb: usbck {
 175                                         compatible = "atmel,at91rm9200-clk-usb";
 176                                         #clock-cells = <0>;
 177                                         atmel,clk-divisors = <1 2 4 0>;
 178                                         clocks = <&pllb>;
 179                                 };
 180
 181                                 prog: progck {
 182                                         compatible = "atmel,at91rm9200-clk-programmable";
 183                                         #address-cells = <1>;
 184                                         #size-cells = <0>;
 185                                         interrupt-parent = <&pmc>;
 186                                         clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
 187
 188                                         prog0: prog@0 {
 189                                                 #clock-cells = <0>;
 190                                                 reg = <0>;
 191                                                 interrupts = <AT91_PMC_PCKRDY(0)>;
 192                                         };
 193
 194                                         prog1: prog@1 {
 195                                                 #clock-cells = <0>;
 196                                                 reg = <1>;
 197                                                 interrupts = <AT91_PMC_PCKRDY(1)>;
 198                                         };
 199                                 };
 200
 201                                 systemck {
 202                                         compatible = "atmel,at91rm9200-clk-system";
 203                                         #address-cells = <1>;
 204                                         #size-cells = <0>;
 205
 206                                         uhpck: uhpck@6 {
 207                                                 #clock-cells = <0>;
 208                                                 reg = <6>;
 209                                                 clocks = <&usb>;
 210                                         };
 211
 212                                         udpck: udpck@7 {
 213                                                 #clock-cells = <0>;
 214                                                 reg = <7>;
 215                                                 clocks = <&usb>;
 216                                         };
 217
 218                                         pck0: pck0@8 {
 219                                                 #clock-cells = <0>;
 220                                                 reg = <8>;
 221                                                 clocks = <&prog0>;
 222                                         };
 223
 224                                         pck1: pck1@9 {
 225                                                 #clock-cells = <0>;
 226                                                 reg = <9>;
 227                                                 clocks = <&prog1>;
 228                                         };
 229                                 };
 230
 231                                 periphck {
 232                                         compatible = "atmel,at91rm9200-clk-peripheral";
 233                                         #address-cells = <1>;
 234                                         #size-cells = <0>;
 235                                         clocks = <&mck>;
 236                                         u-boot,dm-pre-reloc;
 237
 238                                         pioA_clk: pioA_clk@2 {
 239                                                 #clock-cells = <0>;
 240                                                 reg = <2>;
 241                                                 u-boot,dm-pre-reloc;
 242                                         };
 243
 244                                         pioB_clk: pioB_clk@3 {
 245                                                 #clock-cells = <0>;
 246                                                 reg = <3>;
 247                                                 u-boot,dm-pre-reloc;
 248                                         };
 249
 250                                         pioC_clk: pioC_clk@4 {
 251                                                 #clock-cells = <0>;
 252                                                 reg = <4>;
 253                                                 u-boot,dm-pre-reloc;
 254                                         };
 255
 256                                         adc_clk: adc_clk@5 {
 257                                                 #clock-cells = <0>;
 258                                                 reg = <5>;
 259                                         };
 260
 261                                         usart0_clk: usart0_clk@6 {
 262                                                 #clock-cells = <0>;
 263                                                 reg = <6>;
 264                                         };
 265
 266                                         usart1_clk: usart1_clk@7 {
 267                                                 #clock-cells = <0>;
 268                                                 reg = <7>;
 269                                         };
 270
 271                                         usart2_clk: usart2_clk@8 {
 272                                                 #clock-cells = <0>;
 273                                                 reg = <8>;
 274                                         };
 275
 276                                         mci0_clk: mci0_clk@9 {
 277                                                 #clock-cells = <0>;
 278                                                 reg = <9>;
 279                                         };
 280
 281                                         udc_clk: udc_clk@10 {
 282                                                 #clock-cells = <0>;
 283                                                 reg = <10>;
 284                                         };
 285
 286                                         twi0_clk: twi0_clk@11 {
 287                                                 reg = <11>;
 288                                                 #clock-cells = <0>;
 289                                         };
 290
 291                                         spi0_clk: spi0_clk@12 {
 292                                                 #clock-cells = <0>;
 293                                                 reg = <12>;
 294                                         };
 295
 296                                         spi1_clk: spi1_clk@13 {
 297                                                 #clock-cells = <0>;
 298                                                 reg = <13>;
 299                                         };
 300
 301                                         ssc0_clk: ssc0_clk@14 {
 302                                                 #clock-cells = <0>;
 303                                                 reg = <14>;
 304                                         };
 305
 306                                         tc0_clk: tc0_clk@17 {
 307                                                 #clock-cells = <0>;
 308                                                 reg = <17>;
 309                                         };
 310
 311                                         tc1_clk: tc1_clk@18 {
 312                                                 #clock-cells = <0>;
 313                                                 reg = <18>;
 314                                         };
 315
 316                                         tc2_clk: tc2_clk@19 {
 317                                                 #clock-cells = <0>;
 318                                                 reg = <19>;
 319                                         };
 320
 321                                         ohci_clk: ohci_clk@20 {
 322                                                 #clock-cells = <0>;
 323                                                 reg = <20>;
 324                                         };
 325
 326                                         macb0_clk: macb0_clk@21 {
 327                                                 #clock-cells = <0>;
 328                                                 reg = <21>;
 329                                         };
 330
 331                                         isi_clk: isi_clk@22 {
 332                                                 #clock-cells = <0>;
 333                                                 reg = <22>;
 334                                         };
 335
 336                                         usart3_clk: usart3_clk@23 {
 337                                                 #clock-cells = <0>;
 338                                                 reg = <23>;
 339                                         };
 340
 341                                         uart0_clk: uart0_clk@24 {
 342                                                 #clock-cells = <0>;
 343                                                 reg = <24>;
 344                                         };
 345
 346                                         uart1_clk: uart1_clk@25 {
 347                                                 #clock-cells = <0>;
 348                                                 reg = <25>;
 349                                         };
 350
 351                                         tc3_clk: tc3_clk@26 {
 352                                                 #clock-cells = <0>;
 353                                                 reg = <26>;
 354                                         };
 355
 356                                         tc4_clk: tc4_clk@27 {
 357                                                 #clock-cells = <0>;
 358                                                 reg = <27>;
 359                                         };
 360
 361                                         tc5_clk: tc5_clk@28 {
 362                                                 #clock-cells = <0>;
 363                                                 reg = <28>;
 364                                         };
 365                                 };
 366                         };
 367
 368                         rstc@fffffd00 {
 369                                 compatible = "atmel,at91sam9260-rstc";
 370                                 reg = <0xfffffd00 0x10>;
 371                                 clocks = <&clk32k>;
 372                         };
 373
 374                         shdwc@fffffd10 {
 375                                 compatible = "atmel,at91sam9260-shdwc";
 376                                 reg = <0xfffffd10 0x10>;
 377                                 clocks = <&clk32k>;
 378                         };
 379
 380                         pit: timer@fffffd30 {
 381                                 compatible = "atmel,at91sam9260-pit";
 382                                 reg = <0xfffffd30 0xf>;
 383                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 384                                 clocks = <&mck>;
 385                         };
 386
 387                         tcb0: timer@fffa0000 {
 388                                 compatible = "atmel,at91rm9200-tcb";
 389                                 reg = <0xfffa0000 0x100>;
 390                                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 391                                               18 IRQ_TYPE_LEVEL_HIGH 0
 392                                               19 IRQ_TYPE_LEVEL_HIGH 0>;
 393                                 clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>;
 394                                 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 395                         };
 396
 397                         tcb1: timer@fffdc000 {
 398                                 compatible = "atmel,at91rm9200-tcb";
 399                                 reg = <0xfffdc000 0x100>;
 400                                 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
 401                                               27 IRQ_TYPE_LEVEL_HIGH 0
 402                                               28 IRQ_TYPE_LEVEL_HIGH 0>;
 403                                 clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>;
 404                                 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 405                         };
 406
 407                         pioA: gpio@fffff400 {
 408                                 compatible = "atmel,at91rm9200-gpio";
 409                                 reg = <0xfffff400 0x200>;
 410                                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
 411                                 #gpio-cells = <2>;
 412                                 gpio-controller;
 413                                 interrupt-controller;
 414                                 #interrupt-cells = <2>;
 415                                 clocks = <&pioA_clk>;
 416                                 u-boot,dm-pre-reloc;
 417                         };
 418
 419                         pioB: gpio@fffff600 {
 420                                 compatible = "atmel,at91rm9200-gpio";
 421                                 reg = <0xfffff600 0x200>;
 422                                 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
 423                                 #gpio-cells = <2>;
 424                                 gpio-controller;
 425                                 interrupt-controller;
 426                                 #interrupt-cells = <2>;
 427                                 clocks = <&pioB_clk>;
 428                                 u-boot,dm-pre-reloc;
 429                         };
 430
 431                         pioC: gpio@fffff800 {
 432                                 compatible = "atmel,at91rm9200-gpio";
 433                                 reg = <0xfffff800 0x200>;
 434                                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
 435                                 #gpio-cells = <2>;
 436                                 gpio-controller;
 437                                 interrupt-controller;
 438                                 #interrupt-cells = <2>;
 439                                 clocks = <&pioC_clk>;
 440                                 u-boot,dm-pre-reloc;
 441                         };
 442
 443                         pinctrl@fffff400 {
 444                                 #address-cells = <1>;
 445                                 #size-cells = <1>;
 446                                 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
 447                                 ranges = <0xfffff400 0xfffff400 0x600>;
 448                                 reg = <0xfffff400 0x200         /* pioA */
 449                                        0xfffff600 0x200         /* pioB */
 450                                        0xfffff800 0x200         /* pioC */
 451                                       >;
 452
 453                                 atmel,mux-mask = <
 454                                       /*    A         B     */
 455                                        0xffffffff 0xffc00c3b  /* pioA */
 456                                        0xffffffff 0x7fff3ccf  /* pioB */
 457                                        0xffffffff 0x007fffff  /* pioC */
 458                                       >;
 459                                 u-boot,dm-pre-reloc;
 460
 461                                 /* shared pinctrl settings */
 462                                 dbgu {
 463                                         u-boot,dm-pre-reloc;
 464                                         pinctrl_dbgu: dbgu-0 {
 465                                                 atmel,pins =
 466                                                         <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB14 periph A */
 467                                                          AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PB15 periph with pullup */
 468                                         };
 469                                 };
 470
 471                                 usart0 {
 472                                         pinctrl_usart0: usart0-0 {
 473                                                 atmel,pins =
 474                                                         <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB4 periph A */
 475                                                          AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB5 periph A */
 476                                         };
 477
 478                                         pinctrl_usart0_rts: usart0_rts-0 {
 479                                                 atmel,pins =
 480                                                         <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB26 periph A */
 481                                         };
 482
 483                                         pinctrl_usart0_cts: usart0_cts-0 {
 484                                                 atmel,pins =
 485                                                         <AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB27 periph A */
 486                                         };
 487
 488                                         pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
 489                                                 atmel,pins =
 490                                                         <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB24 periph A */
 491                                                          AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB22 periph A */
 492                                         };
 493
 494                                         pinctrl_usart0_dcd: usart0_dcd-0 {
 495                                                 atmel,pins =
 496                                                         <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB23 periph A */
 497                                         };
 498
 499                                         pinctrl_usart0_ri: usart0_ri-0 {
 500                                                 atmel,pins =
 501                                                         <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB25 periph A */
 502                                         };
 503                                 };
 504
 505                                 usart1 {
 506                                         pinctrl_usart1: usart1-0 {
 507                                                 atmel,pins =
 508                                                         <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */
 509                                                          AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB7 periph A */
 510                                         };
 511
 512                                         pinctrl_usart1_rts: usart1_rts-0 {
 513                                                 atmel,pins =
 514                                                         <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB28 periph A */
 515                                         };
 516
 517                                         pinctrl_usart1_cts: usart1_cts-0 {
 518                                                 atmel,pins =
 519                                                         <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB29 periph A */
 520                                         };
 521                                 };
 522
 523                                 usart2 {
 524                                         pinctrl_usart2: usart2-0 {
 525                                                 atmel,pins =
 526                                                         <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB8 periph A with pullup */
 527                                                          AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB9 periph A */
 528                                         };
 529
 530                                         pinctrl_usart2_rts: usart2_rts-0 {
 531                                                 atmel,pins =
 532                                                         <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA4 periph A */
 533                                         };
 534
 535                                         pinctrl_usart2_cts: usart2_cts-0 {
 536                                                 atmel,pins =
 537                                                         <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA5 periph A */
 538                                         };
 539                                 };
 540
 541                                 usart3 {
 542                                         pinctrl_usart3: usart3-0 {
 543                                                 atmel,pins =
 544                                                         <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB10 periph A with pullup */
 545                                                          AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB11 periph A */
 546                                         };
 547
 548                                         pinctrl_usart3_rts: usart3_rts-0 {
 549                                                 atmel,pins =
 550                                                         <AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 551                                         };
 552
 553                                         pinctrl_usart3_cts: usart3_cts-0 {
 554                                                 atmel,pins =
 555                                                         <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 556                                         };
 557                                 };
 558
 559                                 uart0 {
 560                                         pinctrl_uart0: uart0-0 {
 561                                                 atmel,pins =
 562                                                         <AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PA31 periph B with pullup */
 563                                                          AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */
 564                                         };
 565                                 };
 566
 567                                 uart1 {
 568                                         pinctrl_uart1: uart1-0 {
 569                                                 atmel,pins =
 570                                                         <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB12 periph A with pullup */
 571                                                          AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */
 572                                         };
 573                                 };
 574
 575                                 nand {
 576                                         pinctrl_nand: nand-0 {
 577                                                 atmel,pins =
 578                                                         <AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP     /* PC13 gpio RDY pin pull_up */
 579                                                          AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PC14 gpio enable pin pull_up */
 580                                         };
 581                                 };
 582
 583                                 macb {
 584                                         pinctrl_macb_rmii: macb_rmii-0 {
 585                                                 atmel,pins =
 586                                                         <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A */
 587                                                          AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA13 periph A */
 588                                                          AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA14 periph A */
 589                                                          AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA15 periph A */
 590                                                          AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA16 periph A */
 591                                                          AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
 592                                                          AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA18 periph A */
 593                                                          AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA19 periph A */
 594                                                          AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA20 periph A */
 595                                                          AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */
 596                                         };
 597
 598                                         pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
 599                                                 atmel,pins =
 600                                                         <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B */
 601                                                          AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA23 periph B */
 602                                                          AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA24 periph B */
 603                                                          AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
 604                                                          AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA26 periph B */
 605                                                          AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 606                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 607                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
 608                                         };
 609
 610                                         pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
 611                                                 atmel,pins =
 612                                                         <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA10 periph B */
 613                                                          AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA11 periph B */
 614                                                          AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA22 periph B */
 615                                                          AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA25 periph B */
 616                                                          AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA26 periph B */
 617                                                          AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
 618                                                          AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
 619                                                          AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */
 620                                         };
 621                                 };
 622
 623                                 mmc0 {
 624                                         pinctrl_mmc0_clk: mmc0_clk-0 {
 625                                                 atmel,pins =
 626                                                         <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA8 periph A */
 627                                         };
 628
 629                                         pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
 630                                                 atmel,pins =
 631                                                         <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
 632                                                          AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA6 periph A with pullup */
 633                                         };
 634
 635                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 636                                                 atmel,pins =
 637                                                         <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA9 periph A with pullup */
 638                                                          AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA10 periph A with pullup */
 639                                                          AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA11 periph A with pullup */
 640                                         };
 641
 642                                         pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
 643                                                 atmel,pins =
 644                                                         <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA1 periph B with pullup */
 645                                                          AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA0 periph B with pullup */
 646                                         };
 647
 648                                         pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
 649                                                 atmel,pins =
 650                                                         <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA5 periph B with pullup */
 651                                                          AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA4 periph B with pullup */
 652                                                          AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;       /* PA3 periph B with pullup */
 653                                         };
 654                                 };
 655
 656                                 ssc0 {
 657                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 658                                                 atmel,pins =
 659                                                         <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB16 periph A */
 660                                                          AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB17 periph A */
 661                                                          AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */
 662                                         };
 663
 664                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 665                                                 atmel,pins =
 666                                                         <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB19 periph A */
 667                                                          AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB20 periph A */
 668                                                          AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB21 periph A */
 669                                         };
 670                                 };
 671
 672                                 spi0 {
 673                                         pinctrl_spi0: spi0-0 {
 674                                                 atmel,pins =
 675                                                         <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PA0 periph A SPI0_MISO pin */
 676                                                          AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PA1 periph A SPI0_MOSI pin */
 677                                                          AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PA2 periph A SPI0_SPCK pin */
 678                                         };
 679                                 };
 680
 681                                 spi1 {
 682                                         pinctrl_spi1: spi1-0 {
 683                                                 atmel,pins =
 684                                                         <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB0 periph A SPI1_MISO pin */
 685                                                          AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB1 periph A SPI1_MOSI pin */
 686                                                          AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB2 periph A SPI1_SPCK pin */
 687                                         };
 688                                 };
 689
 690                                 i2c_gpio0 {
 691                                         pinctrl_i2c_gpio0: i2c_gpio0-0 {
 692                                                 atmel,pins =
 693                                                         <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE
 694                                                          AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
 695                                         };
 696                                 };
 697
 698                                 tcb0 {
 699                                         pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 700                                                 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 701                                         };
 702
 703                                         pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
 704                                                 atmel,pins = <AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 705                                         };
 706
 707                                         pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
 708                                                 atmel,pins = <AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 709                                         };
 710
 711                                         pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
 712                                                 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 713                                         };
 714
 715                                         pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
 716                                                 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 717                                         };
 718
 719                                         pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
 720                                                 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 721                                         };
 722
 723                                         pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
 724                                                 atmel,pins = <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 725                                         };
 726
 727                                         pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
 728                                                 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 729                                         };
 730
 731                                         pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
 732                                                 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 733                                         };
 734                                 };
 735
 736                                 tcb1 {
 737                                         pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
 738                                                 atmel,pins = <AT91_PIOB 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 739                                         };
 740
 741                                         pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
 742                                                 atmel,pins = <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 743                                         };
 744
 745                                         pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
 746                                                 atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 747                                         };
 748
 749                                         pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
 750                                                 atmel,pins = <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 751                                         };
 752
 753                                         pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
 754                                                 atmel,pins = <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 755                                         };
 756
 757                                         pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
 758                                                 atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 759                                         };
 760
 761                                         pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
 762                                                 atmel,pins = <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 763                                         };
 764
 765                                         pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
 766                                                 atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 767                                         };
 768
 769                                         pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
 770                                                 atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 771                                         };
 772                                 };
 773                         };
 774
 775                         dbgu: serial@fffff200 {
 776                                 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 777                                 reg = <0xfffff200 0x200>;
 778                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 779                                 pinctrl-names = "default";
 780                                 pinctrl-0 = <&pinctrl_dbgu>;
 781                                 clocks = <&mck>;
 782                                 clock-names = "usart";
 783                                 status = "disabled";
 784                         };
 785
 786                         usart0: serial@fffb0000 {
 787                                 compatible = "atmel,at91sam9260-usart";
 788                                 reg = <0xfffb0000 0x200>;
 789                                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 790                                 atmel,use-dma-rx;
 791                                 atmel,use-dma-tx;
 792                                 pinctrl-names = "default";
 793                                 pinctrl-0 = <&pinctrl_usart0>;
 794                                 clocks = <&usart0_clk>;
 795                                 clock-names = "usart";
 796                                 status = "disabled";
 797                         };
 798
 799                         usart1: serial@fffb4000 {
 800                                 compatible = "atmel,at91sam9260-usart";
 801                                 reg = <0xfffb4000 0x200>;
 802                                 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 803                                 atmel,use-dma-rx;
 804                                 atmel,use-dma-tx;
 805                                 pinctrl-names = "default";
 806                                 pinctrl-0 = <&pinctrl_usart1>;
 807                                 clocks = <&usart1_clk>;
 808                                 clock-names = "usart";
 809                                 status = "disabled";
 810                         };
 811
 812                         usart2: serial@fffb8000 {
 813                                 compatible = "atmel,at91sam9260-usart";
 814                                 reg = <0xfffb8000 0x200>;
 815                                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 816                                 atmel,use-dma-rx;
 817                                 atmel,use-dma-tx;
 818                                 pinctrl-names = "default";
 819                                 pinctrl-0 = <&pinctrl_usart2>;
 820                                 clocks = <&usart2_clk>;
 821                                 clock-names = "usart";
 822                                 status = "disabled";
 823                         };
 824
 825                         usart3: serial@fffd0000 {
 826                                 compatible = "atmel,at91sam9260-usart";
 827                                 reg = <0xfffd0000 0x200>;
 828                                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 829                                 atmel,use-dma-rx;
 830                                 atmel,use-dma-tx;
 831                                 pinctrl-names = "default";
 832                                 pinctrl-0 = <&pinctrl_usart3>;
 833                                 clocks = <&usart3_clk>;
 834                                 clock-names = "usart";
 835                                 status = "disabled";
 836                         };
 837
 838                         uart0: serial@fffd4000 {
 839                                 compatible = "atmel,at91sam9260-usart";
 840                                 reg = <0xfffd4000 0x200>;
 841                                 interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
 842                                 atmel,use-dma-rx;
 843                                 atmel,use-dma-tx;
 844                                 pinctrl-names = "default";
 845                                 pinctrl-0 = <&pinctrl_uart0>;
 846                                 clocks = <&uart0_clk>;
 847                                 clock-names = "usart";
 848                                 status = "disabled";
 849                         };
 850
 851                         uart1: serial@fffd8000 {
 852                                 compatible = "atmel,at91sam9260-usart";
 853                                 reg = <0xfffd8000 0x200>;
 854                                 interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 855                                 atmel,use-dma-rx;
 856                                 atmel,use-dma-tx;
 857                                 pinctrl-names = "default";
 858                                 pinctrl-0 = <&pinctrl_uart1>;
 859                                 clocks = <&uart1_clk>;
 860                                 clock-names = "usart";
 861                                 status = "disabled";
 862                         };
 863
 864                         macb0: ethernet@fffc4000 {
 865                                 compatible = "cdns,at91sam9260-macb", "cdns,macb";
 866                                 reg = <0xfffc4000 0x100>;
 867                                 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 868                                 pinctrl-names = "default";
 869                                 pinctrl-0 = <&pinctrl_macb_rmii>;
 870                                 clocks = <&macb0_clk>, <&macb0_clk>;
 871                                 clock-names = "hclk", "pclk";
 872                                 status = "disabled";
 873                         };
 874
 875                         usb1: gadget@fffa4000 {
 876                                 compatible = "atmel,at91sam9260-udc";
 877                                 reg = <0xfffa4000 0x4000>;
 878                                 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
 879                                 clocks = <&udc_clk>, <&udpck>;
 880                                 clock-names = "pclk", "hclk";
 881                                 status = "disabled";
 882                         };
 883
 884                         i2c0: i2c@fffac000 {
 885                                 compatible = "atmel,at91sam9260-i2c";
 886                                 reg = <0xfffac000 0x100>;
 887                                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 888                                 #address-cells = <1>;
 889                                 #size-cells = <0>;
 890                                 clocks = <&twi0_clk>;
 891                                 status = "disabled";
 892                         };
 893
 894                         mmc0: mmc@fffa8000 {
 895                                 compatible = "atmel,hsmci";
 896                                 reg = <0xfffa8000 0x600>;
 897                                 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
 898                                 #address-cells = <1>;
 899                                 #size-cells = <0>;
 900                                 pinctrl-names = "default";
 901                                 clocks = <&mci0_clk>;
 902                                 clock-names = "mci_clk";
 903                                 status = "disabled";
 904                         };
 905
 906                         ssc0: ssc@fffbc000 {
 907                                 compatible = "atmel,at91rm9200-ssc";
 908                                 reg = <0xfffbc000 0x4000>;
 909                                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 910                                 pinctrl-names = "default";
 911                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 912                                 clocks = <&ssc0_clk>;
 913                                 clock-names = "pclk";
 914                                 status = "disabled";
 915                         };
 916
 917                         spi0: spi@fffc8000 {
 918                                 #address-cells = <1>;
 919                                 #size-cells = <0>;
 920                                 compatible = "atmel,at91rm9200-spi";
 921                                 reg = <0xfffc8000 0x200>;
 922                                 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
 923                                 pinctrl-names = "default";
 924                                 pinctrl-0 = <&pinctrl_spi0>;
 925                                 clocks = <&spi0_clk>;
 926                                 clock-names = "spi_clk";
 927                                 status = "disabled";
 928                         };
 929
 930                         spi1: spi@fffcc000 {
 931                                 #address-cells = <1>;
 932                                 #size-cells = <0>;
 933                                 compatible = "atmel,at91rm9200-spi";
 934                                 reg = <0xfffcc000 0x200>;
 935                                 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 936                                 pinctrl-names = "default";
 937                                 pinctrl-0 = <&pinctrl_spi1>;
 938                                 clocks = <&spi1_clk>;
 939                                 clock-names = "spi_clk";
 940                                 status = "disabled";
 941                         };
 942
 943                         adc0: adc@fffe0000 {
 944                                 #address-cells = <1>;
 945                                 #size-cells = <0>;
 946                                 compatible = "atmel,at91sam9260-adc";
 947                                 reg = <0xfffe0000 0x100>;
 948                                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
 949                                 clocks = <&adc_clk>, <&adc_op_clk>;
 950                                 clock-names = "adc_clk", "adc_op_clk";
 951                                 atmel,adc-use-external-triggers;
 952                                 atmel,adc-channels-used = <0xf>;
 953                                 atmel,adc-vref = <3300>;
 954                                 atmel,adc-startup-time = <15>;
 955                                 atmel,adc-res = <8 10>;
 956                                 atmel,adc-res-names = "lowres", "highres";
 957                                 atmel,adc-use-res = "highres";
 958
 959                                 trigger@0 {
 960                                         reg = <0>;
 961                                         trigger-name = "timer-counter-0";
 962                                         trigger-value = <0x1>;
 963                                 };
 964                                 trigger@1 {
 965                                         reg = <1>;
 966                                         trigger-name = "timer-counter-1";
 967                                         trigger-value = <0x3>;
 968                                 };
 969
 970                                 trigger@2 {
 971                                         reg = <2>;
 972                                         trigger-name = "timer-counter-2";
 973                                         trigger-value = <0x5>;
 974                                 };
 975
 976                                 trigger@3 {
 977                                         reg = <3>;
 978                                         trigger-name = "external";
 979                                         trigger-value = <0xd>;
 980                                         trigger-external;
 981                                 };
 982                         };
 983
 984                         rtc@fffffd20 {
 985                                 compatible = "atmel,at91sam9260-rtt";
 986                                 reg = <0xfffffd20 0x10>;
 987                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 988                                 clocks = <&clk32k>;
 989                                 status = "disabled";
 990                         };
 991
 992                         watchdog@fffffd40 {
 993                                 compatible = "atmel,at91sam9260-wdt";
 994                                 reg = <0xfffffd40 0x10>;
 995                                 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 996                                 clocks = <&clk32k>;
 997                                 atmel,watchdog-type = "hardware";
 998                                 atmel,reset-type = "all";
 999                                 atmel,dbg-halt;
1000                                 status = "disabled";
1001                         };
1002
1003                         gpbr: syscon@fffffd50 {
1004                                 compatible = "atmel,at91sam9260-gpbr", "syscon";
1005                                 reg = <0xfffffd50 0x10>;
1006                                 status = "disabled";
1007                         };
1008                 };
1009
1010                 nand0: nand@40000000 {
1011                         compatible = "atmel,at91rm9200-nand";
1012                         #address-cells = <1>;
1013                         #size-cells = <1>;
1014                         reg = <0x40000000 0x10000000
1015                                0xffffe800 0x200
1016                               >;
1017                         atmel,nand-addr-offset = <21>;
1018                         atmel,nand-cmd-offset = <22>;
1019                         pinctrl-names = "default";
1020                         pinctrl-0 = <&pinctrl_nand>;
1021                         gpios = <&pioC 13 GPIO_ACTIVE_HIGH
1022                                  &pioC 14 GPIO_ACTIVE_HIGH
1023                                  0
1024                                 >;
1025                         status = "disabled";
1026                 };
1027
1028                 usb0: ohci@00500000 {
1029                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1030                         reg = <0x00500000 0x100000>;
1031                         interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
1032                         clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
1033                         clock-names = "ohci_clk", "hclk", "uhpck";
1034                         status = "disabled";
1035                 };
1036         };
1037
1038         i2c@0 {
1039                 compatible = "i2c-gpio";
1040                 gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
1041                          &pioA 24 GPIO_ACTIVE_HIGH /* scl */
1042                         >;
1043                 i2c-gpio,sda-open-drain;
1044                 i2c-gpio,scl-open-drain;
1045                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
1046                 #address-cells = <1>;
1047                 #size-cells = <0>;
1048                 pinctrl-names = "default";
1049                 pinctrl-0 = <&pinctrl_i2c_gpio0>;
1050                 status = "disabled";
1051         };
1052 };