arm64: zynqmp: Add reset-controller support in serdes driver
[oweals/u-boot.git] / arch / arm / dts / armada-xp-mv78460.dtsi
1 /*
2  * Device Tree Include file for Marvell Armada XP family SoC
3  *
4  * Copyright (C) 2012 Marvell
5  *
6  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
7  *
8  * This file is dual-licensed: you can use it either under the terms
9  * of the GPL or the X11 license, at your option. Note that this dual
10  * licensing only applies to this file, and not this project as a
11  * whole.
12  *
13  *  a) This file is free software; you can redistribute it and/or
14  *     modify it under the terms of the GNU General Public License as
15  *     published by the Free Software Foundation; either version 2 of the
16  *     License, or (at your option) any later version.
17  *
18  *     This file is distributed in the hope that it will be useful
19  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
20  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  *     GNU General Public License for more details.
22  *
23  * Or, alternatively
24  *
25  *  b) Permission is hereby granted, free of charge, to any person
26  *     obtaining a copy of this software and associated documentation
27  *     files (the "Software"), to deal in the Software without
28  *     restriction, including without limitation the rights to use
29  *     copy, modify, merge, publish, distribute, sublicense, and/or
30  *     sell copies of the Software, and to permit persons to whom the
31  *     Software is furnished to do so, subject to the following
32  *     conditions:
33  *
34  *     The above copyright notice and this permission notice shall be
35  *     included in all copies or substantial portions of the Software.
36  *
37  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
38  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
39  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
40  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
41  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
42  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
43  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
44  *     OTHER DEALINGS IN THE SOFTWARE.
45  *
46  * Contains definitions specific to the Armada XP MV78460 SoC that are not
47  * common to all Armada XP SoCs.
48  */
49
50 #include "armada-xp.dtsi"
51
52 / {
53         model = "Marvell Armada XP MV78460 SoC";
54         compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
55
56         aliases {
57                 gpio0 = &gpio0;
58                 gpio1 = &gpio1;
59                 gpio2 = &gpio2;
60         };
61
62
63         cpus {
64                 #address-cells = <1>;
65                 #size-cells = <0>;
66                 enable-method = "marvell,armada-xp-smp";
67
68                 cpu@0 {
69                         device_type = "cpu";
70                         compatible = "marvell,sheeva-v7";
71                         reg = <0>;
72                         clocks = <&cpuclk 0>;
73                         clock-latency = <1000000>;
74                 };
75
76                 cpu@1 {
77                         device_type = "cpu";
78                         compatible = "marvell,sheeva-v7";
79                         reg = <1>;
80                         clocks = <&cpuclk 1>;
81                         clock-latency = <1000000>;
82                 };
83
84                 cpu@2 {
85                         device_type = "cpu";
86                         compatible = "marvell,sheeva-v7";
87                         reg = <2>;
88                         clocks = <&cpuclk 2>;
89                         clock-latency = <1000000>;
90                 };
91
92                 cpu@3 {
93                         device_type = "cpu";
94                         compatible = "marvell,sheeva-v7";
95                         reg = <3>;
96                         clocks = <&cpuclk 3>;
97                         clock-latency = <1000000>;
98                 };
99         };
100
101         soc {
102                 /*
103                  * MV78460 has 4 PCIe units Gen2.0: Two units can be
104                  * configured as x4 or quad x1 lanes. Two units are
105                  * x4/x1.
106                  */
107                 pcie-controller {
108                         compatible = "marvell,armada-xp-pcie";
109                         status = "disabled";
110                         device_type = "pci";
111
112                         #address-cells = <3>;
113                         #size-cells = <2>;
114
115                         msi-parent = <&mpic>;
116                         bus-range = <0x00 0xff>;
117
118                         ranges =
119                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
120                                 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
121                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
122                                 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
123                                 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
124                                 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
125                                 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
126                                 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
127                                 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
128                                 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
129                                 0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
130                                 0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
131                                 0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
132                                 0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
133                                 0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
134                                 0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
135                                 0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
136                                 0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
137
138                                 0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
139                                 0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
140                                 0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
141                                 0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
142                                 0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
143                                 0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
144                                 0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
145                                 0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
146
147                                 0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
148                                 0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
149
150                                 0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
151                                 0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
152
153                         pcie@1,0 {
154                                 device_type = "pci";
155                                 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
156                                 reg = <0x0800 0 0 0 0>;
157                                 #address-cells = <3>;
158                                 #size-cells = <2>;
159                                 #interrupt-cells = <1>;
160                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
161                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
162                                 interrupt-map-mask = <0 0 0 0>;
163                                 interrupt-map = <0 0 0 0 &mpic 58>;
164                                 marvell,pcie-port = <0>;
165                                 marvell,pcie-lane = <0>;
166                                 clocks = <&gateclk 5>;
167                                 status = "disabled";
168                         };
169
170                         pcie@2,0 {
171                                 device_type = "pci";
172                                 assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
173                                 reg = <0x1000 0 0 0 0>;
174                                 #address-cells = <3>;
175                                 #size-cells = <2>;
176                                 #interrupt-cells = <1>;
177                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
178                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
179                                 interrupt-map-mask = <0 0 0 0>;
180                                 interrupt-map = <0 0 0 0 &mpic 59>;
181                                 marvell,pcie-port = <0>;
182                                 marvell,pcie-lane = <1>;
183                                 clocks = <&gateclk 6>;
184                                 status = "disabled";
185                         };
186
187                         pcie@3,0 {
188                                 device_type = "pci";
189                                 assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
190                                 reg = <0x1800 0 0 0 0>;
191                                 #address-cells = <3>;
192                                 #size-cells = <2>;
193                                 #interrupt-cells = <1>;
194                                 ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
195                                           0x81000000 0 0 0x81000000 0x3 0 1 0>;
196                                 interrupt-map-mask = <0 0 0 0>;
197                                 interrupt-map = <0 0 0 0 &mpic 60>;
198                                 marvell,pcie-port = <0>;
199                                 marvell,pcie-lane = <2>;
200                                 clocks = <&gateclk 7>;
201                                 status = "disabled";
202                         };
203
204                         pcie@4,0 {
205                                 device_type = "pci";
206                                 assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
207                                 reg = <0x2000 0 0 0 0>;
208                                 #address-cells = <3>;
209                                 #size-cells = <2>;
210                                 #interrupt-cells = <1>;
211                                 ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
212                                           0x81000000 0 0 0x81000000 0x4 0 1 0>;
213                                 interrupt-map-mask = <0 0 0 0>;
214                                 interrupt-map = <0 0 0 0 &mpic 61>;
215                                 marvell,pcie-port = <0>;
216                                 marvell,pcie-lane = <3>;
217                                 clocks = <&gateclk 8>;
218                                 status = "disabled";
219                         };
220
221                         pcie@5,0 {
222                                 device_type = "pci";
223                                 assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
224                                 reg = <0x2800 0 0 0 0>;
225                                 #address-cells = <3>;
226                                 #size-cells = <2>;
227                                 #interrupt-cells = <1>;
228                                 ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
229                                           0x81000000 0 0 0x81000000 0x5 0 1 0>;
230                                 interrupt-map-mask = <0 0 0 0>;
231                                 interrupt-map = <0 0 0 0 &mpic 62>;
232                                 marvell,pcie-port = <1>;
233                                 marvell,pcie-lane = <0>;
234                                 clocks = <&gateclk 9>;
235                                 status = "disabled";
236                         };
237
238                         pcie@6,0 {
239                                 device_type = "pci";
240                                 assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
241                                 reg = <0x3000 0 0 0 0>;
242                                 #address-cells = <3>;
243                                 #size-cells = <2>;
244                                 #interrupt-cells = <1>;
245                                 ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
246                                           0x81000000 0 0 0x81000000 0x6 0 1 0>;
247                                 interrupt-map-mask = <0 0 0 0>;
248                                 interrupt-map = <0 0 0 0 &mpic 63>;
249                                 marvell,pcie-port = <1>;
250                                 marvell,pcie-lane = <1>;
251                                 clocks = <&gateclk 10>;
252                                 status = "disabled";
253                         };
254
255                         pcie@7,0 {
256                                 device_type = "pci";
257                                 assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
258                                 reg = <0x3800 0 0 0 0>;
259                                 #address-cells = <3>;
260                                 #size-cells = <2>;
261                                 #interrupt-cells = <1>;
262                                 ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
263                                           0x81000000 0 0 0x81000000 0x7 0 1 0>;
264                                 interrupt-map-mask = <0 0 0 0>;
265                                 interrupt-map = <0 0 0 0 &mpic 64>;
266                                 marvell,pcie-port = <1>;
267                                 marvell,pcie-lane = <2>;
268                                 clocks = <&gateclk 11>;
269                                 status = "disabled";
270                         };
271
272                         pcie@8,0 {
273                                 device_type = "pci";
274                                 assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
275                                 reg = <0x4000 0 0 0 0>;
276                                 #address-cells = <3>;
277                                 #size-cells = <2>;
278                                 #interrupt-cells = <1>;
279                                 ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
280                                           0x81000000 0 0 0x81000000 0x8 0 1 0>;
281                                 interrupt-map-mask = <0 0 0 0>;
282                                 interrupt-map = <0 0 0 0 &mpic 65>;
283                                 marvell,pcie-port = <1>;
284                                 marvell,pcie-lane = <3>;
285                                 clocks = <&gateclk 12>;
286                                 status = "disabled";
287                         };
288
289                         pcie@9,0 {
290                                 device_type = "pci";
291                                 assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
292                                 reg = <0x4800 0 0 0 0>;
293                                 #address-cells = <3>;
294                                 #size-cells = <2>;
295                                 #interrupt-cells = <1>;
296                                 ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
297                                           0x81000000 0 0 0x81000000 0x9 0 1 0>;
298                                 interrupt-map-mask = <0 0 0 0>;
299                                 interrupt-map = <0 0 0 0 &mpic 99>;
300                                 marvell,pcie-port = <2>;
301                                 marvell,pcie-lane = <0>;
302                                 clocks = <&gateclk 26>;
303                                 status = "disabled";
304                         };
305
306                         pcie@10,0 {
307                                 device_type = "pci";
308                                 assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
309                                 reg = <0x5000 0 0 0 0>;
310                                 #address-cells = <3>;
311                                 #size-cells = <2>;
312                                 #interrupt-cells = <1>;
313                                 ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
314                                           0x81000000 0 0 0x81000000 0xa 0 1 0>;
315                                 interrupt-map-mask = <0 0 0 0>;
316                                 interrupt-map = <0 0 0 0 &mpic 103>;
317                                 marvell,pcie-port = <3>;
318                                 marvell,pcie-lane = <0>;
319                                 clocks = <&gateclk 27>;
320                                 status = "disabled";
321                         };
322                 };
323
324                 internal-regs {
325                         gpio0: gpio@18100 {
326                                 compatible = "marvell,orion-gpio";
327                                 reg = <0x18100 0x40>;
328                                 ngpios = <32>;
329                                 gpio-controller;
330                                 #gpio-cells = <2>;
331                                 interrupt-controller;
332                                 #interrupt-cells = <2>;
333                                 interrupts = <82>, <83>, <84>, <85>;
334                         };
335
336                         gpio1: gpio@18140 {
337                                 compatible = "marvell,orion-gpio";
338                                 reg = <0x18140 0x40>;
339                                 ngpios = <32>;
340                                 gpio-controller;
341                                 #gpio-cells = <2>;
342                                 interrupt-controller;
343                                 #interrupt-cells = <2>;
344                                 interrupts = <87>, <88>, <89>, <90>;
345                         };
346
347                         gpio2: gpio@18180 {
348                                 compatible = "marvell,orion-gpio";
349                                 reg = <0x18180 0x40>;
350                                 ngpios = <3>;
351                                 gpio-controller;
352                                 #gpio-cells = <2>;
353                                 interrupt-controller;
354                                 #interrupt-cells = <2>;
355                                 interrupts = <91>;
356                         };
357
358                         eth3: ethernet@34000 {
359                                 compatible = "marvell,armada-xp-neta";
360                                 reg = <0x34000 0x4000>;
361                                 interrupts = <14>;
362                                 clocks = <&gateclk 1>;
363                                 status = "disabled";
364                         };
365                 };
366         };
367 };
368
369 &pinctrl {
370         compatible = "marvell,mv78460-pinctrl";
371 };