arch/arm/dts/armada-3720-turris-mox.dts

   1 // SPDX-License-Identifier: GPL-2.0+ or X11
   2 /*
   3  * Device Tree file for CZ.NIC Turris Mox Board
   4  * 2018 by Marek Behun <marek.behun@nic.cz>
   5  *
   6  * Based on armada-3720-espressobin.dts by:
   7  *   Gregory CLEMENT <gregory.clement@free-electrons.com>
   8  *   Konstantin Porotchkin <kostap@marvell.com>
   9  */
  10
  11 /dts-v1/;
  12
  13 #include <dt-bindings/gpio/gpio.h>
  14 #include "armada-372x.dtsi"
  15
  16 / {
  17         model = "CZ.NIC Turris Mox Board";
  18         compatible = "cznic,turris-mox", "marvell,armada3720",
  19                      "marvell,armada3710";
  20
  21         chosen {
  22                 stdout-path = "serial0:115200n8";
  23         };
  24
  25         aliases {
  26                 ethernet0 = &eth0;
  27                 ethernet1 = &eth1;
  28                 i2c0 = &i2c0;
  29                 spi0 = &spi0;
  30         };
  31
  32         memory {
  33                 device_type = "memory";
  34                 reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
  35         };
  36
  37         reg_usb3_vbus: usb3_vbus@0 {
  38                 compatible = "regulator-fixed";
  39                 regulator-name = "usb3-vbus";
  40                 regulator-min-microvolt = <5000000>;
  41                 regulator-max-microvolt = <5000000>;
  42                 startup-delay-us = <2000000>;
  43                 shutdown-delay-us = <1000000>;
  44                 gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
  45                 enable-active-high;
  46                 regulator-boot-on;
  47         };
  48
  49         vsdc_reg: vsdc-reg {
  50                 compatible = "regulator-gpio";
  51                 regulator-name = "vsdc";
  52                 regulator-min-microvolt = <1800000>;
  53                 regulator-max-microvolt = <3300000>;
  54                 regulator-boot-on;
  55
  56                 gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
  57                 gpios-states = <0>;
  58                 states = <1800000 0x1
  59                           3300000 0x0>;
  60                 enable-active-high;
  61         };
  62
  63         mdio {
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66
  67                 eth_phy1: ethernet-phy@1 {
  68                         reg = <1>;
  69                 };
  70         };
  71 };
  72
  73 &comphy {
  74         max-lanes = <3>;
  75         phy0 {
  76                 phy-type = <PHY_TYPE_SGMII1>;
  77                 phy-speed = <PHY_SPEED_3_125G>;
  78         };
  79
  80         phy1 {
  81                 phy-type = <PHY_TYPE_PEX0>;
  82                 phy-speed = <PHY_SPEED_5G>;
  83         };
  84
  85         phy2 {
  86                 phy-type = <PHY_TYPE_USB3_HOST0>;
  87                 phy-speed = <PHY_SPEED_5G>;
  88         };
  89 };
  90
  91 &eth0 {
  92         status = "okay";
  93         pinctrl-names = "default";
  94         pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
  95         phy-mode = "rgmii";
  96         phy = <&eth_phy1>;
  97 };
  98
  99 &i2c0 {
 100         pinctrl-names = "default";
 101         pinctrl-0 = <&i2c1_pins>;
 102         status = "okay";
 103
 104         rtc@6f {
 105                 compatible = "microchip,mcp7941x";
 106                 reg = <0x6f>;
 107         };
 108 };
 109
 110 &sdhci1 {
 111         wp-inverted;
 112         bus-width = <4>;
 113         cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
 114         vqmmc-supply = <&vsdc_reg>;
 115         marvell,pad-type = "sd";
 116         status = "okay";
 117 };
 118
 119 &pinctrl_nb {
 120         spi_cs1_pins: spi-cs1-pins {
 121                 groups = "spi_cs1";
 122                 function = "spi";
 123         };
 124 };
 125
 126 &spi0 {
 127         status = "okay";
 128         pinctrl-names = "default";
 129         pinctrl-0 = <&spi_cs1_pins>;
 130         assigned-clocks = <&nb_periph_clk 7>;
 131         assigned-clock-parents = <&tbg 1>;
 132         assigned-clock-rates = <20000000>;
 133
 134         spi-flash@0 {
 135                 #address-cells = <1>;
 136                 #size-cells = <1>;
 137                 compatible = "st,s25fl064l", "jedec,spi-nor";
 138                 reg = <0>;
 139                 spi-max-frequency = <20000000>;
 140                 m25p,fast-read;
 141         };
 142
 143         moxtet@1 {
 144                 #address-cells = <1>;
 145                 #size-cells = <0>;
 146                 compatible = "cznic,moxtet";
 147                 reg = <1>;
 148                 reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
 149                 spi-max-frequency = <1000000>;
 150                 spi-cpol;
 151                 spi-cpha;
 152         };
 153 };
 154
 155 &uart0 {
 156         pinctrl-names = "default";
 157         pinctrl-0 = <&uart1_pins>;
 158         status = "okay";
 159 };
 160
 161 &usb2 {
 162         status = "okay";
 163 };
 164
 165 &usb3 {
 166         vbus-supply = <&reg_usb3_vbus>;
 167         status = "okay";
 168 };
 169
 170 &pcie0 {
 171         pinctrl-names = "default";
 172         pinctrl-0 = <&pcie_pins>;
 173         reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
 174         status = "disabled";
 175 };