arch/arm/dts/am335x-rut.dts

   1 /*
   2  * Copyright (C) 2014 DENX Software Engineering GmbH
   3  * Heiko Schocher <hs@denx.de>
   4  *
   5  * Based on:
   6  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12 /dts-v1/;
  13
  14 #include "am33xx.dtsi"
  15 #include <dt-bindings/input/input.h>
  16
  17 / {
  18         model = "RUT";
  19         compatible = "ti,am335x-evm", "ti,am33xx";
  20
  21         buzzer {
  22                 compatible = "pwm-beeper";
  23                 pwms = <&ecap0 0 16000 0>;
  24         };
  25
  26         chosen {
  27                 stdout-path = &uart0;
  28                 tick-timer = &timer2;
  29         };
  30
  31         cpus {
  32                 cpu@0 {
  33                         cpu0-supply = <&dcdc2_reg>;
  34                 };
  35         };
  36
  37         gpio_keys: powerfail-keys {
  38                 compatible = "gpio-keys";
  39                 autorepeat;
  40
  41                 pwr-fail0 {
  42                         label = "power-fail";
  43                         linux,code = <KEY_POWER>;
  44                         gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
  45                         gpio-key,wakeup;
  46                 };
  47
  48                 pwr-fail1 {
  49                         label = "power-fail-redundant";
  50                         linux,code = <KEY_POWER>;
  51                         gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
  52                         gpio-key,wakeup;
  53                 };
  54         };
  55
  56         leds {
  57                 compatible = "gpio-leds";
  58
  59                 led_green {
  60                         label = "rut:green:debug:run_mode";
  61                         gpios = <&gpio3 20 1>;
  62                         /* activelow = 1, default trigger heartbeat */
  63                 };
  64                 led_yellow {
  65                         label = "rut:debug:yellow:osc_ch1";
  66                         gpios = <&gpio0 17 1>;
  67                         /* activelow = 1, default trigger mmc0 */
  68                 };
  69                 led_red {
  70                         label = "rut:debug:red:osc_ch2";
  71                         gpios = <&gpio0 16 1>;
  72                         /* activelow = 1, default trigger debug_osc_ch2 */
  73                 };
  74                 /* optional */
  75                 led_alive {
  76                         label = "rut:alive";
  77                         gpios = <&gpio0 15 1>;
  78                         linux,default-trigger = "heartbeat";
  79                         /* activelow = 1, default trigger heartbeat */
  80                 };
  81
  82         };
  83
  84         memory {
  85                 device_type = "memory";
  86                 reg = <0x80000000 0x10000000>; /* 256 MB */
  87         };
  88
  89         panel {
  90                 compatible = "ti,tilcdc,panel";
  91                 pinctrl-names = "default";
  92                 pinctrl-0 = <&lcd_pins_s0>;
  93                 status = "okay";
  94
  95                 /* FORMIKE_KWH043ST20_F01 */
  96                 panel-info {
  97                         ac-bias           = <255>;
  98                         ac-bias-intrpt    = <0>;
  99                         dma-burst-sz      = <16>;
 100                         bpp               = <16>;
 101                         fdd               = <0x80>;
 102                         sync-edge         = <0>;
 103                         sync-ctrl         = <1>;
 104                         raster-order      = <0>;
 105                         fifo-th           = <0>;
 106                         tft-alt-mode      = <0>;
 107                         invert-pxl-clk    = <1>;
 108                 };
 109
 110                 display-timings {
 111                         native-mode = <&timing1>;
 112                         timing1: 480x800p60 {
 113                                 clock-frequency = <29925000>;
 114                                 hactive = <480>;
 115                                 vactive = <800>;
 116                                 hfront-porch = <50>;
 117                                 hback-porch = <50>;
 118                                 hsync-len = <50>;
 119                                 vback-porch = <50>;
 120                                 vfront-porch = <50>;
 121                                 vsync-len = <50>;
 122                                 hsync-active = <1>;
 123                                 vsync-active = <1>;
 124                         };
 125                 };
 126         };
 127
 128         vmmc: fixedregulator3 {
 129                 compatible = "regulator-fixed";
 130                 regulator-name = "vmmc";
 131                 regulator-min-microvolt = <3300000>;
 132                 regulator-max-microvolt = <3300000>;
 133         };
 134
 135         watchdog {
 136                 compatible = "linux,wdt-gpio";
 137                 gpios = <&gpio0 14 0>;
 138                 hw_algo = "level";
 139                 hw_margin_ms = <30000>;
 140         };
 141 };
 142
 143 &aes {
 144         status = "okay";
 145 };
 146
 147 &cppi41dma  {
 148         status = "okay";
 149 };
 150
 151 &cpsw_emac0 {
 152         phy-mode = "rmii";
 153         phy-handle = <&ethernet_phy>;
 154 };
 155
 156 &davinci_mdio {
 157         pinctrl-names = "default", "sleep";
 158         pinctrl-0 = <&davinci_mdio_default>;
 159         pinctrl-1 = <&davinci_mdio_sleep>;
 160         status = "okay";
 161         gpios = <&gpio2 18 0>;
 162
 163         ethernet_phy: ethernet-phy@1 {
 164                 compatible = "ethernet-phy-id2000.5ce1";
 165                 reg = <1>;
 166                 natsemi,master_mode_fixup;
 167         };
 168 };
 169
 170 &elm {
 171         status = "okay";
 172 };
 173
 174 &epwmss0 {
 175         status = "okay";
 176
 177         ecap0: ecap@48300100 {
 178                 status = "okay";
 179                 pinctrl-names = "default";
 180                 pinctrl-0 = <&ecap0_pins>;
 181         };
 182 };
 183
 184 &epwmss1 {
 185         status = "okay";
 186         pinctrl-names = "default";
 187         pinctrl-0 = <&epwmss1_pins>;
 188 };
 189
 190 &gpmc {
 191         pinctrl-names = "default";
 192         pinctrl-0 = <&nandflash_pins>;
 193         status = "okay";
 194
 195         ranges = <0 0 0x08000000 0x10000000>;   /* CS0: NAND */
 196
 197         nand@0,0 {
 198                 reg = <0 0 0>; /* CS0, offset 0 */
 199                 nand-bus-width = <8>;
 200                 ti,nand-ecc-opt = "bch8";
 201                 gpmc,device-nand = "true";
 202                 gpmc,device-width = <1>;
 203                 gpmc,sync-clk-ps = <0>;
 204                 gpmc,cs-on-ns = <0>;
 205                 gpmc,cs-rd-off-ns = <57>;
 206                 gpmc,cs-wr-off-ns = <57>;
 207                 gpmc,adv-on-ns = <0>;
 208                 gpmc,adv-rd-off-ns = <57>;
 209                 gpmc,adv-wr-off-ns = <57>;
 210                 gpmc,we-on-ns = <0>;
 211                 gpmc,we-off-ns = <48>;
 212                 gpmc,oe-on-ns = <0>;
 213                 gpmc,oe-off-ns = <57>;
 214                 gpmc,access-ns = <38>;
 215                 gpmc,rd-cycle-ns = <67>;
 216                 gpmc,wr-cycle-ns = <67>;
 217                 gpmc,wait-on-read = "true";
 218                 gpmc,wait-on-write = "true";
 219                 gpmc,bus-turnaround-ns = <0>;
 220                 gpmc,cycle2cycle-delay-ns = <0>;
 221                 gpmc,clk-activation-ns = <0>;
 222                 gpmc,wait-monitoring-ns = <0>;
 223                 gpmc,wr-access-ns = <96>;
 224                 gpmc,wr-data-mux-bus-ns = <0>;
 225
 226                 #address-cells = <1>;
 227                 #size-cells = <1>;
 228                 elm_id = <&elm>;
 229         };
 230 };
 231
 232 &i2c0 {
 233         pinctrl-names = "default";
 234         pinctrl-0 = <&i2c0_pins>;
 235         clock-frequency = <400000>;
 236         status = "okay";
 237
 238         eeprom: eeprom@50 {
 239                 compatible = "atmel,24c128";
 240                 reg = <0x50>;
 241                 pagesize = <32>;
 242         };
 243
 244         tps: tps@24 {
 245                 reg = <0x24>;
 246         };
 247 };
 248
 249 &i2c1 {
 250         pinctrl-names = "default";
 251         pinctrl-0 = <&i2c1_pins>;
 252         clock-frequency = <100000>;
 253         status = "okay";
 254
 255         atmel: atmel_mxt_ts@4a {
 256                 compatible = "atmel,maxtouch";
 257                 reg = <0x4a>;
 258                 interrupt-parent = <&gpio1>;
 259                 interrupts = <28 8>;
 260                 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
 261         };
 262
 263         temp@48 {
 264                 compatible = "st,ds75";
 265                 reg = <0x4c>;
 266         };
 267 };
 268
 269 &lcdc {
 270         status = "okay";
 271 };
 272
 273 &mac {
 274         pinctrl-names = "default", "sleep";
 275         pinctrl-0 = <&cpsw_default>;
 276         pinctrl-1 = <&cpsw_sleep>;
 277         status = "okay";
 278 };
 279
 280 &mmc1 {
 281         vmmc-supply = <&vmmc>;
 282         pinctrl-names = "default";
 283         pinctrl-0 = <&mmc1_pins>;
 284         status = "okay";
 285 };
 286
 287 &phy_sel {
 288         rmii-clock-ext;
 289 };
 290
 291 &sham {
 292         status = "okay";
 293 };
 294
 295 &spi0 {
 296         pinctrl-names = "default";
 297         pinctrl-0 = <&spi0_pins>;
 298         status = "okay";
 299         spi-flash@0 {
 300                 #address-cells = <1>;
 301                 #size-cells = <1>;
 302                 compatible = "mx25l25635e";
 303                 reg = <0>; /* Chip select 0 */
 304                 spi-max-frequency = <24000000>;
 305
 306                 partition@0 {
 307                         label = "dummy";
 308                         reg = <0x0000000 0x8000>;
 309                 };
 310         };
 311 };
 312
 313 &spi1 {
 314         pinctrl-names = "default";
 315         pinctrl-0 = <&spi1_pins>;
 316         status = "okay";
 317
 318         lcd_init: lcd@0 {
 319                 compatible = "formike,kwh043st20";
 320                 reg = <0>;
 321                 reset-gpios = <&gpio3 19 0>;
 322                 spi-max-frequency = <1200000>;
 323                 spi-cpol;
 324                 spi-cpha;
 325                 power-on-delay = <10>;
 326                 reset-delay = <10>;
 327         };
 328 };
 329
 330 /include/ "tps65217.dtsi"
 331
 332 &tps {
 333         backlight0: backlight {
 334                 isel = <1>;  /* 1 - ISET1, 2 ISET2 */
 335                 fdim = <1000>; /* TPS65217_BL_FDIM_100HZ */
 336                 default-brightness = <80>;
 337         };
 338
 339         regulators {
 340                 dcdc1_reg: regulator@0 {
 341                         regulator-always-on;
 342                 };
 343
 344                 dcdc2_reg: regulator@1 {
 345                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 346                         regulator-name = "vdd_mpu";
 347                         regulator-min-microvolt = <925000>;
 348                         regulator-max-microvolt = <1325000>;
 349                         regulator-boot-on;
 350                         regulator-always-on;
 351                 };
 352
 353                 dcdc3_reg: regulator@2 {
 354                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 355                         regulator-name = "vdd_core";
 356                         regulator-min-microvolt = <925000>;
 357                         regulator-max-microvolt = <1150000>;
 358                         regulator-boot-on;
 359                         regulator-always-on;
 360                 };
 361
 362                 ldo1_reg: regulator@3 {
 363                         regulator-always-on;
 364                 };
 365
 366                 ldo2_reg: regulator@4 {
 367                         regulator-always-on;
 368                 };
 369
 370                 ldo3_reg: regulator@5 {
 371                         regulator-always-on;
 372                 };
 373
 374                 ldo4_reg: regulator@6 {
 375                         regulator-always-on;
 376                 };
 377         };
 378 };
 379
 380 &tscadc {
 381         status = "okay";
 382         adc {
 383                 ti,adc-channels = <4 5 6 7>;
 384         };
 385 };
 386
 387 &uart0 {
 388         pinctrl-names = "default";
 389         pinctrl-0 = <&uart0_pins>;
 390
 391         status = "okay";
 392 };
 393
 394 &usb {
 395         status = "okay";
 396 };
 397
 398 &usb_ctrl_mod {
 399         status = "okay";
 400 };
 401
 402 &usb0 {
 403         dr_mode = "device";
 404         status = "okay";
 405 };
 406
 407 &usb0_phy {
 408         status = "okay";
 409 };
 410
 411 &am33xx_pinmux {
 412         pinctrl-names = "default";
 413         pinctrl-0 = <&clkout2_pin &gpio_pin>;
 414
 415         clkout2_pin: pinmux_clkout2_pin {
 416                 pinctrl-single,pins = <
 417                         0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
 418                 >;
 419         };
 420
 421         cpsw_default: cpsw_default {
 422                 pinctrl-single,pins = <
 423                         /* Slave 1 */
 424                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
 425                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.mii1_rxerr */
 426                         0x114 (MUX_MODE1)       /* mii1_txen.mii1_txen */
 427                         0x124 (MUX_MODE1)       /* mii1_txd1.mii1_txd1 */
 428                         0x128 (MUX_MODE1)       /* mii1_txd0.mii1_txd0 */
 429                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_rxd1.mii1_rxd1 */
 430                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_rxd0.mii1_rxd0 */
 431                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
 432                 >;
 433         };
 434
 435         cpsw_sleep: cpsw_sleep {
 436                 pinctrl-single,pins = <
 437                         /* Slave 1 reset value */
 438                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 439                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 440                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 441                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 442                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 443                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 444                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 445                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 446                 >;
 447         };
 448
 449         davinci_mdio_default: davinci_mdio_default {
 450                 pinctrl-single,pins = <
 451                         /* MDIO */
 452                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 453                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 454                 >;
 455         };
 456
 457         davinci_mdio_sleep: davinci_mdio_sleep {
 458                 pinctrl-single,pins = <
 459                         /* MDIO reset value */
 460                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 461                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 462                 >;
 463         };
 464
 465         ecap0_pins: ecap_pins {
 466                 pinctrl-single,pins = <
 467                         0x164 (MUX_MODE0)       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 buzzer frequency: ecap.0 */
 468                 >;
 469         };
 470
 471         epwmss1_pins: epwmss_pins {
 472                 pinctrl-single,pins = <
 473                         0x48 (PIN_INPUT | MUX_MODE7)    /* gpmc_a2.gpio1_18 buzzer frequency: ehrpwm1A high-Z due to connected to ecap0 by R0469 */
 474                         0x4c (MUX_MODE6)        /* gpmc_a3.ehrpwm1B buzzer volume pwm */
 475                 >;
 476         };
 477
 478         gpio_pin: gpio_pin {
 479                 pinctrl-single,pins = <
 480                         0x6c (PIN_INPUT | MUX_MODE7)            /* gpmc_a11.gpio1_27 PWR_FAIL_GPIO_SPARE */
 481                         0x78 (PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7) /* gpmc_be1n.gpio1_28 TOUCH_CHANGE_N */
 482                         0x88 (PIN_OUTPUT_PULLUP | INPUT_EN | MUX_MODE7)         /* gpmc_csn3.gpio2_0 RUT_GPIO0_GPIO */
 483                         0x118 (PIN_INPUT | MUX_MODE7)           /* gmii1_rxdv.gpio3_4 PWR_FAIL_GPIO */
 484                         0x11c (MUX_MODE7)                       /* mii1_txd3.gpio0_16 DEBUG_OSC_CH2_GPIO */
 485                         0x120 (MUX_MODE7)                       /* mii1_txd2.gpio0_17 DEBUG_OSC_CH1_GPIO */
 486                         0x134 (MUX_MODE7)                       /* gmii1_rxd3.gpio2_18 PHY_RSTn_GPIO */
 487                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)  /* gmii1_rxd2.gpio2_19 PHY_INT_GPIO */
 488                         0x180 (MUX_MODE7)                       /* uart1_rxd.gpio0_14 WATCHDOG_TRIGGER_GPIO */
 489                         0x184 (MUX_MODE7)                       /* uart1_txd.gpio0_15 ALIVE_LED_N_GPIO */
 490                         0x1a0 (MUX_MODE7)                       /* mcasp0_aclkr.gpio3_18 MAXTOUCH_RESET_GPIO */
 491                         0x1a4 (MUX_MODE7)                       /* mcasp0_fsr.gpio3_19 DISPLAY_RESET_GPIO */
 492                         0x1a8 (MUX_MODE7)                       /* mcasp0_axr1.gpio3_20 DEBUG_RUN_MODE_GPIO */
 493                         0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)  /* mcasp0_ahclkx.gpio3_21 NORFLASH_WP_GPIO */
 494                         0x1b0 (PIN_OUTPUT | MUX_MODE3)          /* xdma_event_intr0.clkout1 */
 495                 >;
 496         };
 497
 498         i2c0_pins: pinmux_i2c0_pins {
 499                 pinctrl-single,pins = <
 500                         0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
 501                         0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
 502                 >;
 503         };
 504
 505         i2c1_pins: pinmux_i2c1_pins {
 506                 pinctrl-single,pins = <
 507                         0x168 (PIN_INPUT | MUX_MODE3)   /* uart0_ctsn.i2c1_sda */
 508                         0x16c (PIN_INPUT | MUX_MODE3)   /* uart0.rtsn.i2c1_scl */
 509                 >;
 510         };
 511
 512         lcd_pins_s0: lcd_pins_s0 {
 513                 pinctrl-single,pins = <
 514                         0x20 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)  /* gpmc_ad8.lcd_data23 */
 515                         0x24 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)  /* gpmc_ad9.lcd_data22 */
 516                         0x28 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)  /* gpmc_ad10.lcd_data21 */
 517                         0x2c (PIN_OUTPUT_PULLDOWN | MUX_MODE1)  /* gpmc_ad11.lcd_data20 */
 518                         0x30 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)  /* gpmc_ad12.lcd_data19 */
 519                         0x34 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)  /* gpmc_ad13.lcd_data18 */
 520                         0x38 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)  /* gpmc_ad14.lcd_data17 */
 521                         0x3c (PIN_OUTPUT_PULLDOWN | MUX_MODE1)  /* gpmc_ad15.lcd_data16 */
 522                         0xa0 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data0.lcd_data0 */
 523                         0xa4 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data1.lcd_data1 */
 524                         0xa8 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data2.lcd_data2 */
 525                         0xac (PIN_OUTPUT | MUX_MODE0)           /* lcd_data3.lcd_data3 */
 526                         0xb0 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data4.lcd_data4 */
 527                         0xb4 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data5.lcd_data5 */
 528                         0xb8 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data6.lcd_data6 */
 529                         0xbc (PIN_OUTPUT | MUX_MODE0)           /* lcd_data7.lcd_data7 */
 530                         0xc0 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data8.lcd_data8 */
 531                         0xc4 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data9.lcd_data9 */
 532                         0xc8 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data10.lcd_data10 */
 533                         0xcc (PIN_OUTPUT | MUX_MODE0)           /* lcd_data11.lcd_data11 */
 534                         0xd0 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data12.lcd_data12 */
 535                         0xd4 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data13.lcd_data13 */
 536                         0xd8 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data14.lcd_data14 */
 537                         0xdc (PIN_OUTPUT | MUX_MODE0)           /* lcd_data15.lcd_data15 */
 538                         0xe0 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)  /* lcd_vsync.lcd_vsync */
 539                         0xe4 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)  /* lcd_hsync.lcd_hsync */
 540                         0xe8 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)  /* lcd_pclk.lcd_pclk */
 541                         0xec (PIN_OUTPUT_PULLDOWN | MUX_MODE0)  /* lcd_ac_bias_en.lcd_ac_bias_en */
 542                 >;
 543         };
 544
 545         mmc1_pins: mmc1_pins {
 546                 pinctrl-single,pins = <
 547                         0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)     /* mmc0_dat0.mmc0_dat0 */
 548                         0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)     /* mmc0_dat1.mmc0_dat1 */
 549                         0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)     /* mmc0_dat2.mmc0_dat2 */
 550                         0xfc (PIN_INPUT_PULLUP | MUX_MODE0)     /* mmc0_dat3.mmc0_dat3 */
 551                         0x100 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_clk.mmc0_clk */
 552                         0x104 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_cmd.mmc0_cmd */
 553                 >;
 554         };
 555
 556         nandflash_pins: pinmux_nandflash_pins {
 557                 pinctrl-single,pins = <
 558                         0x0 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad0.gpmc_ad0 */
 559                         0x4 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad1.gpmc_ad1 */
 560                         0x8 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad2.gpmc_ad2 */
 561                         0xc (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad3.gpmc_ad3 */
 562                         0x10 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad4.gpmc_ad4 */
 563                         0x14 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad5.gpmc_ad5 */
 564                         0x18 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad6.gpmc_ad6 */
 565                         0x1c (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad7.gpmc_ad7 */
 566                         0x70 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_wait0.gpmc_wait0 */
 567                         0x74 (PIN_INPUT_PULLUP | MUX_MODE7)     /* gpmc_wpn.gpio0_30 */
 568                         0x7c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_csn0.gpmc_csn0 */
 569                         0x90 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_advn_ale.gpmc_advn_ale */
 570                         0x94 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_oen_ren.gpmc_oen_ren */
 571                         0x98 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_wen.gpmc_wen */
 572                         0x9c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_be0n_cle.gpmc_be0n_cle */
 573                 >;
 574         };
 575
 576         spi0_pins: pinmux_spi0_pins {
 577                 pinctrl-single,pins = <
 578                         0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* spi0_sclk.spi0_sclk */
 579                         0x154 (PIN_INPUT_PULLUP | MUX_MODE0)    /* spi0_d0.spi0_d0 */
 580                         0x158 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* spi0_d1.spi0_d1 */
 581                         0x15c (PIN_INPUT_PULLUP | MUX_MODE0)    /* spi0_CS0.spi0_CS0 */
 582                 >;
 583         };
 584
 585         spi1_pins: pinmux_spi1_pins {
 586                 pinctrl-single,pins = <
 587                         0x190 (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* mcasp0_aclkx.spi1_sclk */
 588                         0x194 (PIN_INPUT_PULLUP | MUX_MODE3)    /* mcasp0_fsx.spi1_d0 */
 589                         0x198 (PIN_INPUT_PULLDOWN | MUX_MODE3)  /* mcasp0_axr0.spi1_d1 */
 590                         0x19c (PIN_INPUT_PULLUP | MUX_MODE3)    /* mcasp0_ahclkr.spi1_cs0 */
 591                 >;
 592         };
 593
 594         uart0_pins: pinmux_uart0_pins {
 595                 pinctrl-single,pins = <
 596                         0x170 (PIN_INPUT | MUX_MODE0)   /* uart0_rxd.uart0_rxd */
 597                         0x174 (PIN_OUTPUT | MUX_MODE0)  /* uart0_txd.uart0_txd */
 598                 >;
 599         };
 600 };