6 config SPL_LIBCOMMON_SUPPORT
9 config SPL_LIBDISK_SUPPORT
12 config SPL_LIBGENERIC_SUPPORT
15 config SPL_MMC_SUPPORT
16 default y if MMC_SDHCI_ZYNQ
18 config SPL_SERIAL_SUPPORT
21 config SPL_SPI_FLASH_SUPPORT
22 default y if ZYNQ_QSPI
24 config SPL_SPI_SUPPORT
25 default y if ZYNQ_QSPI
37 config SYS_CONFIG_NAME
38 string "Board configuration name"
39 default "xilinx_zynqmp"
41 This option contains information about board configuration name.
42 Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
43 will be used for board configuration.
45 config SYS_MEM_RSVD_FOR_MMU
46 bool "Reserve memory for MMU Table"
48 If defined this option is used to setup different space for
49 MMU table than the one which will be allocated during
53 string "boot.bin init register filename"
57 Add register writes to boot.bin format (max 256 pairs).
58 Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
60 config PMUFW_INIT_FILE
65 Include external PMUFW (Platform Management Unit FirmWare) to
66 a Xilinx bootable image (boot.bin).
69 bool "Configure ZynqMP USB"
71 config SYS_MALLOC_F_LEN
74 config DEFINE_TCM_OCM_MMAP
75 bool "Define TCM and OCM memory in MMU Table"
78 This option if enabled defines the TCM and OCM memory and its
79 memory attributes in MMU table entry.
81 config ZYNQMP_PSU_INIT_ENABLED
82 bool "Include psu_init"
84 Include psu_init to full u-boot. SPL include psu_init by default.
86 config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
87 bool "Overwrite SPL bootmode"
90 Overwrite bootmode selected via boot mode pins to tell SPL what should
91 be the next boot device.
93 config SPL_ZYNQMP_ALT_BOOTMODE
95 default 0x0 if JTAG_MODE
96 default 0x1 if QSPI_MODE_24BIT
97 default 0x2 if QSPI_MODE_32BIT
98 default 0x3 if SD_MODE
99 default 0x4 if NAND_MODE
100 default 0x5 if SD_MODE1
101 default 0x6 if EMMC_MODE
102 default 0x7 if USB_MODE
103 default 0xa if SW_USBHOST_MODE
104 default 0xb if SW_SATA_MODE
108 depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
114 config QSPI_MODE_24BIT
115 bool "QSPI_MODE_24BIT"
117 config QSPI_MODE_32BIT
118 bool "QSPI_MODE_32BIT"
135 config SW_USBHOST_MODE
136 bool "SW USBHOST_MODE"