1 // SPDX-License-Identifier: GPL-2.0-only
3 * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
5 * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
8 #include "omap36xx.dtsi"
25 device_type = "memory";
26 reg = <0x80000000 0x40000000>; /* 1 GB */
29 vemmc: fixedregulator0 {
30 compatible = "regulator-fixed";
31 regulator-name = "VEMMC";
32 regulator-min-microvolt = <2900000>;
33 regulator-max-microvolt = <2900000>;
34 gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
35 startup-delay-us = <150>;
39 vwlan_fixed: fixedregulator2 {
40 compatible = "regulator-fixed";
41 regulator-name = "VWLAN";
42 gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
47 compatible = "gpio-leds";
50 label = "debug::sleep";
51 gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; /* gpio92 */
52 linux,default-trigger = "default-on";
53 pinctrl-names = "default";
54 pinctrl-0 = <&debug_leds>;
58 /* controlled (enabled/disabled) directly by wl1271 */
60 compatible = "fixed-clock";
62 clock-frequency = <38400000>;
67 accelerator_pins: pinmux_accelerator_pins {
68 pinctrl-single,pins = <
69 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */
70 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
74 debug_leds: pinmux_debug_led_pins {
75 pinctrl-single,pins = <
76 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */
80 mmc2_pins: pinmux_mmc2_pins {
81 pinctrl-single,pins = <
82 OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
83 OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
84 OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
85 OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
86 OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
87 OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
91 wlan_pins: pinmux_wlan_pins {
92 pinctrl-single,pins = <
93 OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
94 OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
98 ssi_pins: pinmux_ssi_pins {
99 pinctrl-single,pins = <
100 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
101 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
102 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
103 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
104 OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
105 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
106 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
107 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
111 ssi_pins_idle: pinmux_ssi_pins_idle {
112 pinctrl-single,pins = <
113 OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */
114 OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */
115 OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */
116 OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
117 OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */
118 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */
119 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */
120 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */
124 modem_pins1: pinmux_modem_core1_pins {
125 pinctrl-single,pins = <
126 OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
127 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */
128 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */
132 uart2_pins: pinmux_uart2_pins {
133 pinctrl-single,pins = <
134 OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
135 OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts */
136 OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
137 OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
143 modem_pins2: pinmux_modem_core2_pins {
144 pinctrl-single,pins = <
145 OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */
151 clock-frequency = <2900000>;
155 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
156 interrupt-parent = <&intc>;
160 /include/ "twl4030.dtsi"
163 compatible = "ti,twl5031";
166 compatible = "ti,twl4030-power";
172 ti,pullups = <0x000001>; /* BIT(0) */
173 ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
177 regulator-name = "vdac";
178 regulator-min-microvolt = <1800000>;
179 regulator-max-microvolt = <1800000>;
183 regulator-name = "vpll1";
184 regulator-min-microvolt = <1800000>;
185 regulator-max-microvolt = <1800000>;
189 regulator-name = "vpll2";
190 regulator-min-microvolt = <1800000>;
191 regulator-max-microvolt = <1800000>;
195 regulator-name = "vaux1";
196 regulator-min-microvolt = <2800000>;
197 regulator-max-microvolt = <2800000>;
202 regulator-name = "vaux2";
203 regulator-min-microvolt = <1800000>;
204 regulator-max-microvolt = <1800000>;
209 regulator-name = "vaux3";
210 regulator-min-microvolt = <2800000>;
211 regulator-max-microvolt = <2800000>;
215 regulator-name = "vaux4";
216 regulator-min-microvolt = <2800000>;
217 regulator-max-microvolt = <2800000>;
221 regulator-name = "vmmc1";
222 regulator-min-microvolt = <1850000>;
223 regulator-max-microvolt = <3150000>;
227 regulator-name = "vmmc2";
228 regulator-min-microvolt = <3000000>;
229 regulator-max-microvolt = <3000000>;
233 regulator-name = "vintana1";
234 regulator-min-microvolt = <1500000>;
235 regulator-max-microvolt = <1500000>;
239 regulator-name = "vintana2";
240 regulator-min-microvolt = <2750000>;
241 regulator-max-microvolt = <2750000>;
245 regulator-name = "vintdig";
246 regulator-min-microvolt = <1500000>;
247 regulator-max-microvolt = <1500000>;
251 regulator-name = "vsim";
252 regulator-min-microvolt = <1800000>;
253 regulator-max-microvolt = <1800000>;
257 regulator-name = "vio";
258 regulator-min-microvolt = <1800000>;
259 regulator-max-microvolt = <1800000>;
263 clock-frequency = <400000>;
266 #address-cells = <1>;
269 compatible = "ams,as3645a";
270 as3645a_flash: flash@0 {
272 flash-timeout-us = <150000>;
273 flash-max-microamp = <320000>;
274 led-max-microamp = <60000>;
275 ams,input-max-microamp = <1750000>;
277 as3645a_indicator: indicator@1 {
279 led-max-microamp = <10000>;
285 clock-frequency = <400000>;
288 compatible = "st,lis3lv02d";
291 Vdd-supply = <&vaux1>;
292 Vdd_IO-supply = <&vio>;
294 pinctrl-names = "default";
295 pinctrl-0 = <&accelerator_pins>;
297 interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
304 /* Limits are 0.5g * value */
305 st,click-threshold-x = <8>;
306 st,click-threshold-y = <8>;
307 st,click-threshold-z = <10>;
309 /* Click must be longer than time limit */
310 st,click-time-limit = <9>;
312 /* Kind of debounce filter */
313 st,click-latency = <50>;
317 st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
320 st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
322 st,highpass-cutoff-hz = <2>;
324 /* Interrupt line 1 for thresholds */
327 /* Interrupt line 2 for click detection */
330 st,wu-duration-1 = <8>;
331 st,wu-duration-2 = <8>;
340 pinctrl-names = "default";
341 pinctrl-0 = <&mmc2_pins>;
342 vmmc-supply = <&vemmc>;
352 interface-type = <0>;
353 usb-phy = <&usb2_phy>;
355 phy-names = "usb2-phy";
361 ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
364 #address-cells = <1>;
366 compatible = "ti,omap2-onenand";
367 reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
370 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
371 * bootloader set values when booted with v4.19 using both N950
372 * and N9 devices (OneNAND Manufacturer: Samsung):
374 * gpmc cs0 before gpmc_cs_program_settings:
375 * cs0 GPMC_CS_CONFIG1: 0xfd001202
376 * cs0 GPMC_CS_CONFIG2: 0x00181800
377 * cs0 GPMC_CS_CONFIG3: 0x00030300
378 * cs0 GPMC_CS_CONFIG4: 0x18001804
379 * cs0 GPMC_CS_CONFIG5: 0x03171d1d
380 * cs0 GPMC_CS_CONFIG6: 0x97080000
384 gpmc,burst-length = <16>;
388 gpmc,device-width = <2>;
389 gpmc,mux-add-data = <2>;
391 gpmc,cs-rd-off-ns = <122>;
392 gpmc,cs-wr-off-ns = <122>;
393 gpmc,adv-on-ns = <0>;
394 gpmc,adv-rd-off-ns = <15>;
395 gpmc,adv-wr-off-ns = <15>;
396 gpmc,oe-on-ns = <20>;
397 gpmc,oe-off-ns = <122>;
399 gpmc,we-off-ns = <122>;
400 gpmc,rd-cycle-ns = <148>;
401 gpmc,wr-cycle-ns = <148>;
402 gpmc,access-ns = <117>;
403 gpmc,page-burst-access-ns = <15>;
404 gpmc,bus-turnaround-ns = <0>;
405 gpmc,cycle2cycle-delay-ns = <0>;
406 gpmc,wait-monitoring-ns = <0>;
407 gpmc,clk-activation-ns = <10>;
408 gpmc,wr-data-mux-bus-ns = <40>;
409 gpmc,wr-access-ns = <117>;
411 gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */
414 * MTD partition table corresponding to Nokia's MeeGo 1.2
418 label = "bootloader";
419 reg = <0x00000000 0x00100000>;
423 reg = <0x00100000 0x002c0000>;
427 reg = <0x003c0000 0x01000000>;
431 reg = <0x013c0000 0x00200000>;
435 reg = <0x015c0000 0x1ca40000>;
439 reg = <0x1e000000 0x02000000>;
442 label = "omap2-onenand";
443 reg = <0x00000000 0x20000000>;
449 pinctrl-names = "default", "idle";
450 pinctrl-0 = <&ssi_pins>;
451 pinctrl-1 = <&ssi_pins_idle>;
453 ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
456 pinctrl-names = "default";
457 pinctrl-0 = <&modem_pins1 &modem_pins2>;
459 hsi-channel-ids = <0>, <1>, <2>, <3>;
460 hsi-channel-names = "mcsaab-control",
464 hsi-speed-kbps = <96000>;
466 hsi-flow = "synchronized";
467 hsi-arb-mode = "round-robin";
469 interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */
471 gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */
472 <&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */
473 <&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */
474 gpio-names = "cmt_apeslpx",
485 pinctrl-names = "default";
486 pinctrl-0 = <&uart2_pins>;
489 compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
491 reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */
492 host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
493 bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
496 clock-names = "sysclk";