arch/arm/boot/dts/imx6sx-softing-vining-2000.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/input.h>
  10 #include "imx6sx.dtsi"
  11
  12 / {
  13         model = "Softing VIN|ING 2000";
  14         compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
  15
  16         chosen {
  17                 stdout-path = &uart1;
  18         };
  19
  20         memory@80000000 {
  21                 device_type = "memory";
  22                 reg = <0x80000000 0x40000000>;
  23         };
  24
  25         reg_usb_otg1_vbus: regulator-usb_otg1_vbus {
  26                 compatible = "regulator-fixed";
  27                 regulator-name = "usb_otg1_vbus";
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&pinctrl_usb_otg1>;
  30                 regulator-min-microvolt = <5000000>;
  31                 regulator-max-microvolt = <5000000>;
  32                 gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
  33                 enable-active-high;
  34         };
  35
  36         reg_peri_3v3: regulator-peri_3v3 {
  37                 compatible = "regulator-fixed";
  38                 regulator-name = "peri_3v3";
  39                 regulator-min-microvolt = <3300000>;
  40                 regulator-max-microvolt = <3300000>;
  41         };
  42
  43         pwmleds {
  44                 compatible = "pwm-leds";
  45
  46                 red {
  47                         label = "red";
  48                         max-brightness = <255>;
  49                         pwms = <&pwm6 0 50000>;
  50                 };
  51
  52                 green {
  53                         label = "green";
  54                         max-brightness = <255>;
  55                         pwms = <&pwm2 0 50000>;
  56                 };
  57
  58                 blue {
  59                         label = "blue";
  60                         max-brightness = <255>;
  61                         pwms = <&pwm1 0 50000>;
  62                 };
  63         };
  64 };
  65
  66 &adc1 {
  67         vref-supply = <&reg_peri_3v3>;
  68         status = "okay";
  69 };
  70
  71 &cpu0 {
  72         /*
  73          * This board has a shared rail of reg_arm and reg_soc (supplied by
  74          * sw1a_reg) which is modeled below, but still this module behaves
  75          * unstable without higher voltages. Hence, set higher voltages here.
  76          */
  77         operating-points = <
  78                 /* kHz    uV */
  79                 996000  1250000
  80                 792000  1175000
  81                 396000  1175000
  82                 198000  1175000
  83                 >;
  84         fsl,soc-operating-points = <
  85                 /* ARM kHz  SOC uV */
  86                 996000  1250000
  87                 792000  1175000
  88                 396000  1175000
  89                 198000  1175000
  90         >;
  91 };
  92
  93 &ecspi4 {
  94         pinctrl-names = "default";
  95         pinctrl-0 = <&pinctrl_ecspi4>;
  96         cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
  97         status = "okay";
  98 };
  99
 100 &fec1 {
 101         pinctrl-names = "default";
 102         pinctrl-0 = <&pinctrl_enet1>;
 103         phy-supply = <&reg_peri_3v3>;
 104         phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 105         phy-reset-duration = <5>;
 106         phy-mode = "rmii";
 107         phy-handle = <&ethphy0>;
 108         status = "okay";
 109
 110         mdio {
 111                 #address-cells = <1>;
 112                 #size-cells = <0>;
 113
 114                 ethphy0: ethernet0-phy@0 {
 115                         reg = <0>;
 116                         max-speed = <100>;
 117                         interrupt-parent = <&gpio2>;
 118                         interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 119                 };
 120         };
 121 };
 122
 123 &fec2 {
 124         pinctrl-names = "default";
 125         pinctrl-0 = <&pinctrl_enet2>;
 126         phy-supply = <&reg_peri_3v3>;
 127         phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
 128         phy-reset-duration = <5>;
 129         phy-mode = "rmii";
 130         phy-handle = <&ethphy1>;
 131         status = "okay";
 132
 133         mdio {
 134                 #address-cells = <1>;
 135                 #size-cells = <0>;
 136
 137                 ethphy1: ethernet1-phy@0 {
 138                         reg = <0>;
 139                         max-speed = <100>;
 140                         interrupt-parent = <&gpio2>;
 141                         interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 142                 };
 143         };
 144 };
 145
 146 &flexcan1 {
 147         pinctrl-names = "default";
 148         pinctrl-0 = <&pinctrl_flexcan1>;
 149         status = "okay";
 150 };
 151
 152 &flexcan2 {
 153         pinctrl-names = "default";
 154         pinctrl-0 = <&pinctrl_flexcan2>;
 155         status = "okay";
 156 };
 157
 158 &i2c1 {
 159         clock-frequency = <100000>;
 160         pinctrl-names = "default";
 161         pinctrl-0 = <&pinctrl_i2c1>;
 162         status = "okay";
 163
 164         proximity: sx9500@28 {
 165                 compatible = "semtech,sx9500";
 166                 reg = <0x28>;
 167                 pinctrl-names = "default";
 168                 pinctrl-0 = <&pinctrl_sx9500>;
 169                 interrupt-parent = <&gpio2>;
 170                 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 171                 reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 172         };
 173
 174         pmic: pfuze100@8 {
 175                 compatible = "fsl,pfuze200";
 176                 reg = <0x08>;
 177
 178                 regulators {
 179                         sw1a_reg: sw1ab {
 180                                 regulator-min-microvolt = <300000>;
 181                                 regulator-max-microvolt = <1875000>;
 182                                 regulator-boot-on;
 183                                 regulator-always-on;
 184                                 regulator-ramp-delay = <6250>;
 185                         };
 186
 187                         sw2_reg: sw2 {
 188                                 regulator-min-microvolt = <800000>;
 189                                 regulator-max-microvolt = <3300000>;
 190                                 regulator-boot-on;
 191                                 regulator-always-on;
 192                         };
 193
 194                         sw3a_reg: sw3a {
 195                                 regulator-min-microvolt = <400000>;
 196                                 regulator-max-microvolt = <1975000>;
 197                                 regulator-boot-on;
 198                                 regulator-always-on;
 199                         };
 200
 201                         sw3b_reg: sw3b {
 202                                 regulator-min-microvolt = <400000>;
 203                                 regulator-max-microvolt = <1975000>;
 204                                 regulator-boot-on;
 205                                 regulator-always-on;
 206                         };
 207
 208                         snvs_reg: vsnvs {
 209                                 regulator-min-microvolt = <1000000>;
 210                                 regulator-max-microvolt = <3000000>;
 211                                 regulator-boot-on;
 212                                 regulator-always-on;
 213                         };
 214
 215                         vref_reg: vrefddr {
 216                                 regulator-boot-on;
 217                                 regulator-always-on;
 218                         };
 219
 220                         vgen1_reg: vgen1 {
 221                                 regulator-min-microvolt = <800000>;
 222                                 regulator-max-microvolt = <1550000>;
 223                                 regulator-always-on;
 224                         };
 225
 226                         vgen2_reg: vgen2 {
 227                                 regulator-min-microvolt = <800000>;
 228                                 regulator-max-microvolt = <1550000>;
 229                         };
 230
 231                         vgen3_reg: vgen3 {
 232                                 regulator-min-microvolt = <1800000>;
 233                                 regulator-max-microvolt = <3300000>;
 234                                 regulator-always-on;
 235                         };
 236
 237                         vgen4_reg: vgen4 {
 238                                 regulator-min-microvolt = <1800000>;
 239                                 regulator-max-microvolt = <3300000>;
 240                                 regulator-always-on;
 241                         };
 242
 243                         vgen5_reg: vgen5 {
 244                                 regulator-min-microvolt = <1800000>;
 245                                 regulator-max-microvolt = <3300000>;
 246                                 regulator-always-on;
 247                         };
 248
 249                         vgen6_reg: vgen6 {
 250                                 regulator-min-microvolt = <1800000>;
 251                                 regulator-max-microvolt = <3300000>;
 252                                 regulator-always-on;
 253                         };
 254                 };
 255         };
 256 };
 257
 258 &i2c3 {
 259         clock-frequency = <100000>;
 260         pinctrl-names = "default";
 261         pinctrl-0 = <&pinctrl_i2c3>;
 262         status = "okay";
 263 };
 264
 265 &iomuxc {
 266         pinctrl-names = "default";
 267         pinctrl-0 = <&pinctrl_gpios>;
 268
 269         pinctrl_ecspi4: ecspi4grp {
 270                 fsl,pins = <
 271                         MX6SX_PAD_SD3_CLK__ECSPI4_SCLK          0x130b1
 272                         MX6SX_PAD_SD3_DATA3__ECSPI4_MISO        0x130b1
 273                         MX6SX_PAD_SD3_CMD__ECSPI4_MOSI          0x130b1
 274                         MX6SX_PAD_SD3_DATA2__GPIO7_IO_4         0x30b0
 275                 >;
 276         };
 277
 278         pinctrl_enet1: enet1grp {
 279                 fsl,pins = <
 280                         MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0   0x30c1
 281                         MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1   0x30c1
 282                         MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0   0xa0f9
 283                         MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1   0xa0f9
 284                         MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN    0x30c1
 285                         MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN    0xa0f9
 286                         MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4000a038
 287                         /* LAN8720 PHY Reset */
 288                         MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9        0x10b0
 289                         /* MDIO */
 290                         MX6SX_PAD_ENET1_MDC__ENET1_MDC          0xa0f9
 291                         MX6SX_PAD_ENET1_MDIO__ENET1_MDIO        0xa0f9
 292                         /* IRQ from PHY */
 293                         MX6SX_PAD_KEY_ROW2__GPIO2_IO_17         0x10b0
 294                 >;
 295         };
 296
 297         pinctrl_enet2: enet2grp {
 298                 fsl,pins = <
 299                         MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0   0x1b0b0
 300                         MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1   0x1b0b0
 301                         MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0   0x1b0b0
 302                         MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1   0x1b0b0
 303                         MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN    0x1b0b0
 304                         MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN    0x1b0b0
 305                         MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4000a038
 306                         /* LAN8720 PHY Reset */
 307                         MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21       0x10b0
 308                         /* MDIO */
 309                         MX6SX_PAD_ENET1_COL__ENET2_MDC          0xa0f9
 310                         MX6SX_PAD_ENET1_CRS__ENET2_MDIO         0xa0f9
 311                         /* IRQ from PHY */
 312                         MX6SX_PAD_KEY_ROW4__GPIO2_IO_19         0x10b0
 313                 >;
 314         };
 315
 316         pinctrl_flexcan1: flexcan1grp {
 317                 fsl,pins = <
 318                         MX6SX_PAD_QSPI1B_DQS__CAN1_TX           0x1b0b0
 319                         MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX         0x1b0b0
 320                 >;
 321         };
 322
 323         pinctrl_flexcan2: flexcan2grp {
 324                 fsl,pins = <
 325                         MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX         0x1b0b0
 326                         MX6SX_PAD_QSPI1A_DQS__CAN2_TX           0x1b0b0
 327                 >;
 328         };
 329
 330         pinctrl_gpios: gpiosgrp {
 331                 fsl,pins = <
 332                         /* reset external uC */
 333                         MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19     0x10b0
 334                         /* IRQ from external uC */
 335                         MX6SX_PAD_KEY_ROW0__GPIO2_IO_15         0x10b0
 336                         /* overcurrent detection */
 337                         MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8        0x10b0
 338                 >;
 339         };
 340
 341         pinctrl_i2c1: i2c1grp {
 342                 fsl,pins = <
 343                         MX6SX_PAD_GPIO1_IO01__I2C1_SDA          0x4001b8b1
 344                         MX6SX_PAD_GPIO1_IO00__I2C1_SCL          0x4001b8b1
 345                 >;
 346         };
 347
 348         pinctrl_i2c3: i2c3grp {
 349                 fsl,pins = <
 350                         MX6SX_PAD_NAND_ALE__I2C3_SDA            0x4001b8b1
 351                         MX6SX_PAD_NAND_CLE__I2C3_SCL            0x4001b8b1
 352                 >;
 353         };
 354
 355         pinctrl_pwm1: pwm1grp-1 {
 356                 fsl,pins = <
 357                         /* blue LED */
 358                         MX6SX_PAD_RGMII2_RD3__PWM1_OUT          0x1b0b1
 359                 >;
 360         };
 361
 362         pinctrl_pwm2: pwm2grp-1 {
 363                 fsl,pins = <
 364                         /* green LED */
 365                         MX6SX_PAD_RGMII2_RD2__PWM2_OUT          0x1b0b1
 366                 >;
 367         };
 368
 369         pinctrl_pwm6: pwm6grp-1 {
 370                 fsl,pins = <
 371                         /* red LED */
 372                         MX6SX_PAD_RGMII2_TD2__PWM6_OUT          0x1b0b1
 373                 >;
 374         };
 375
 376         pinctrl_sx9500: sx9500grp {
 377                 fsl,pins = <
 378                         /* Reset */
 379                         MX6SX_PAD_KEY_COL0__GPIO2_IO_10         0x838
 380                         /* IRQ */
 381                         MX6SX_PAD_KEY_ROW1__GPIO2_IO_16         0x70e0
 382                 >;
 383         };
 384
 385         pinctrl_uart1: uart1grp {
 386                 fsl,pins = <
 387                         MX6SX_PAD_GPIO1_IO04__UART1_TX          0x1b0b1
 388                         MX6SX_PAD_GPIO1_IO05__UART1_RX          0x1b0b1
 389                 >;
 390         };
 391
 392         pinctrl_uart2: uart2grp {
 393                 fsl,pins = <
 394                         MX6SX_PAD_GPIO1_IO06__UART2_TX          0x1b0b1
 395                         MX6SX_PAD_GPIO1_IO07__UART2_RX          0x1b0b1
 396                 >;
 397         };
 398
 399         pinctrl_usb_otg1: usbotg1grp {
 400                 fsl,pins = <
 401                         MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0
 402                 >;
 403         };
 404
 405         pinctrl_usb_otg1_id: usbotg1idgrp {
 406                 fsl,pins = <
 407                         MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059
 408                 >;
 409         };
 410
 411         pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
 412                 fsl,pins = <
 413                         MX6SX_PAD_SD2_CLK__USDHC2_CLK           0x10059
 414                         MX6SX_PAD_SD2_CMD__USDHC2_CMD           0x17059
 415                         MX6SX_PAD_SD2_DATA0__USDHC2_DATA0       0x17059
 416                         MX6SX_PAD_SD2_DATA1__USDHC2_DATA1       0x17059
 417                         MX6SX_PAD_SD2_DATA2__USDHC2_DATA2       0x17059
 418                         MX6SX_PAD_SD2_DATA3__USDHC2_DATA3       0x17059
 419                         MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28       0x1b000
 420                         MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26       0x10b0
 421                 >;
 422         };
 423
 424         pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
 425                 fsl,pins = <
 426                         MX6SX_PAD_SD2_CLK__USDHC2_CLK           0x100b9
 427                         MX6SX_PAD_SD2_CMD__USDHC2_CMD           0x170b9
 428                         MX6SX_PAD_SD2_DATA0__USDHC2_DATA0       0x170b9
 429                         MX6SX_PAD_SD2_DATA1__USDHC2_DATA1       0x170b9
 430                         MX6SX_PAD_SD2_DATA2__USDHC2_DATA2       0x170b9
 431                         MX6SX_PAD_SD2_DATA3__USDHC2_DATA3       0x170b9
 432                 >;
 433         };
 434
 435         pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
 436                 fsl,pins = <
 437                         MX6SX_PAD_SD2_CLK__USDHC2_CLK           0x100f9
 438                         MX6SX_PAD_SD2_CMD__USDHC2_CMD           0x170f9
 439                         MX6SX_PAD_SD2_DATA0__USDHC2_DATA0       0x170f9
 440                         MX6SX_PAD_SD2_DATA1__USDHC2_DATA1       0x170f9
 441                         MX6SX_PAD_SD2_DATA2__USDHC2_DATA2       0x170f9
 442                         MX6SX_PAD_SD2_DATA3__USDHC2_DATA3       0x170f9
 443                 >;
 444         };
 445
 446         pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
 447                 fsl,pins = <
 448                         MX6SX_PAD_SD4_CLK__USDHC4_CLK           0x10059
 449                         MX6SX_PAD_SD4_CMD__USDHC4_CMD           0x17059
 450                         MX6SX_PAD_SD4_DATA0__USDHC4_DATA0       0x17059
 451                         MX6SX_PAD_SD4_DATA1__USDHC4_DATA1       0x17059
 452                         MX6SX_PAD_SD4_DATA2__USDHC4_DATA2       0x17059
 453                         MX6SX_PAD_SD4_DATA3__USDHC4_DATA3       0x17059
 454                         MX6SX_PAD_SD4_DATA4__USDHC4_DATA4       0x17059
 455                         MX6SX_PAD_SD4_DATA5__USDHC4_DATA5       0x17059
 456                         MX6SX_PAD_SD4_DATA6__USDHC4_DATA6       0x17059
 457                         MX6SX_PAD_SD4_DATA7__USDHC4_DATA7       0x17059
 458                         MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B   0x17068
 459                 >;
 460         };
 461
 462         pinctrl_usdhc4_100mhz: usdhc4-100mhz {
 463                 fsl,pins = <
 464                         MX6SX_PAD_SD4_CLK__USDHC4_CLK           0x100b9
 465                         MX6SX_PAD_SD4_CMD__USDHC4_CMD           0x170b9
 466                         MX6SX_PAD_SD4_DATA0__USDHC4_DATA0       0x170b9
 467                         MX6SX_PAD_SD4_DATA1__USDHC4_DATA1       0x170b9
 468                         MX6SX_PAD_SD4_DATA2__USDHC4_DATA2       0x170b9
 469                         MX6SX_PAD_SD4_DATA3__USDHC4_DATA3       0x170b9
 470                         MX6SX_PAD_SD4_DATA4__USDHC4_DATA4       0x170b9
 471                         MX6SX_PAD_SD4_DATA5__USDHC4_DATA5       0x170b9
 472                         MX6SX_PAD_SD4_DATA6__USDHC4_DATA6       0x170b9
 473                         MX6SX_PAD_SD4_DATA7__USDHC4_DATA7       0x170b9
 474                 >;
 475         };
 476
 477         pinctrl_usdhc4_200mhz: usdhc4-200mhz {
 478                 fsl,pins = <
 479                         MX6SX_PAD_SD4_CLK__USDHC4_CLK           0x100f9
 480                         MX6SX_PAD_SD4_CMD__USDHC4_CMD           0x170f9
 481                         MX6SX_PAD_SD4_DATA0__USDHC4_DATA0       0x170f9
 482                         MX6SX_PAD_SD4_DATA1__USDHC4_DATA1       0x170f9
 483                         MX6SX_PAD_SD4_DATA2__USDHC4_DATA2       0x170f9
 484                         MX6SX_PAD_SD4_DATA3__USDHC4_DATA3       0x170f9
 485                         MX6SX_PAD_SD4_DATA4__USDHC4_DATA4       0x170f9
 486                         MX6SX_PAD_SD4_DATA5__USDHC4_DATA5       0x170f9
 487                         MX6SX_PAD_SD4_DATA6__USDHC4_DATA6       0x170f9
 488                         MX6SX_PAD_SD4_DATA7__USDHC4_DATA7       0x170f9
 489                 >;
 490         };
 491 };
 492
 493 &pwm1 {
 494         pinctrl-names = "default";
 495         pinctrl-0 = <&pinctrl_pwm1>;
 496         status = "okay";
 497 };
 498
 499 &pwm2 {
 500         pinctrl-names = "default";
 501         pinctrl-0 = <&pinctrl_pwm2>;
 502         status = "okay";
 503 };
 504
 505 &pwm6 {
 506         pinctrl-names = "default";
 507         pinctrl-0 = <&pinctrl_pwm6>;
 508         status = "okay";
 509 };
 510
 511 &reg_arm {
 512         vin-supply = <&sw1a_reg>;
 513 };
 514
 515 &reg_soc {
 516         vin-supply = <&sw1a_reg>;
 517 };
 518
 519 &snvs_poweroff {
 520         status = "okay";
 521 };
 522
 523 &uart1 {
 524         pinctrl-names = "default";
 525         pinctrl-0 = <&pinctrl_uart1>;
 526         status = "okay";
 527 };
 528
 529 &uart2 {
 530         pinctrl-names = "default";
 531         pinctrl-0 = <&pinctrl_uart2>;
 532         status = "okay";
 533 };
 534
 535 &usbotg1 {
 536         vbus-supply = <&reg_usb_otg1_vbus>;
 537         pinctrl-names = "default";
 538         pinctrl-0 = <&pinctrl_usb_otg1_id>;
 539         status = "okay";
 540 };
 541
 542 &usbotg2 {
 543         dr_mode = "host";
 544         status = "okay";
 545 };
 546
 547 &usdhc2 {
 548         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 549         pinctrl-0 = <&pinctrl_usdhc2_50mhz>;
 550         pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
 551         pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 552         cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
 553         keep-power-in-suspend;
 554         status = "okay";
 555 };
 556
 557 &usdhc4 {
 558         /* hs200-mode is currently unsupported because Vccq is on 3.1V, but
 559          * not on necessary 1.8V.
 560          */
 561         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 562         pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
 563         pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
 564         pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
 565         bus-width = <8>;
 566         keep-power-in-suspend;
 567         non-removable;
 568         cap-mmc-hw-reset;
 569         status = "okay";
 570 };