1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
23 config SYS_INIT_SP_BSS_OFFSET
26 U-Boot typically uses a hard-coded value for the stack pointer
27 before relocation. Define this option to instead calculate the
28 initial SP at run-time. This is useful to avoid hard-coding addresses
29 into U-Boot, so that can be loaded and executed at arbitrary
30 addresses and thus avoid using arbitrary addresses at runtime. This
31 option's value is the offset added to &_bss_start in order to
32 calculate the stack pointer. This offset should be large enough so
33 that the early malloc region, global data (gd), and early stack usage
34 do not overlap any appended DTB.
36 config LINUX_KERNEL_IMAGE_HEADER
39 Place a Linux kernel image header at the start of the U-Boot binary.
40 The format of the header is described in the Linux kernel source at
41 Documentation/arm64/booting.txt. This feature is useful since the
42 image header reports the amount of memory (BSS and similar) that
43 U-Boot needs to use, but which isn't part of the binary.
45 if LINUX_KERNEL_IMAGE_HEADER
46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50 TEXT_OFFSET value written in to the Linux kernel image header.
56 default y if ARM64 && !POSITION_INDEPENDENT
58 config DMA_ADDR_T_64BIT
68 # Used for compatibility with asm files copied from the kernel
69 config ARM_ASM_UNIFIED
73 # Used for compatibility with asm files copied from the kernel
77 config SYS_ARM_CACHE_CP15
78 bool "CP15 based cache enabling support"
80 Select this if your processor suports enabling caches by using
84 bool "MMU-based Paged Memory Management Support"
85 select SYS_ARM_CACHE_CP15
87 Select if you want MMU-based virtualised addressing space
88 support by paged memory management.
91 bool 'Use the ARM v7 PMSA Compliant MPU'
93 Some ARM systems without an MMU have instead a Memory Protection
94 Unit (MPU) that defines the type and permissions for regions of
96 If your CPU has an MPU then you should choose 'y' here unless you
97 know that you do not want to use the MPU.
99 # If set, the workarounds for these ARM errata are applied early during U-Boot
100 # startup. Note that in general these options force the workarounds to be
101 # applied; no CPU-type/version detection exists, unlike the similar options in
102 # the Linux kernel. Do not set these options unless they apply! Also note that
103 # the following can be machine specific errata. These do have ability to
104 # provide rudimentary version and machine specific checks, but expect no
106 # CONFIG_ARM_ERRATA_430973
107 # CONFIG_ARM_ERRATA_454179
108 # CONFIG_ARM_ERRATA_621766
109 # CONFIG_ARM_ERRATA_798870
110 # CONFIG_ARM_ERRATA_801819
111 # CONFIG_ARM_CORTEX_A8_CVE_2017_5715
112 # CONFIG_ARM_CORTEX_A15_CVE_2017_5715
114 config ARM_ERRATA_430973
117 config ARM_ERRATA_454179
120 config ARM_ERRATA_621766
123 config ARM_ERRATA_716044
126 config ARM_ERRATA_725233
129 config ARM_ERRATA_742230
132 config ARM_ERRATA_743622
135 config ARM_ERRATA_751472
138 config ARM_ERRATA_761320
141 config ARM_ERRATA_773022
144 config ARM_ERRATA_774769
147 config ARM_ERRATA_794072
150 config ARM_ERRATA_798870
153 config ARM_ERRATA_801819
156 config ARM_ERRATA_826974
159 config ARM_ERRATA_828024
162 config ARM_ERRATA_829520
165 config ARM_ERRATA_833069
168 config ARM_ERRATA_833471
171 config ARM_ERRATA_845369
174 config ARM_ERRATA_852421
177 config ARM_ERRATA_852423
180 config ARM_ERRATA_855873
183 config ARM_CORTEX_A8_CVE_2017_5715
186 config ARM_CORTEX_A15_CVE_2017_5715
191 select SYS_CACHE_SHIFT_5
196 select SYS_CACHE_SHIFT_5
201 select SYS_CACHE_SHIFT_5
206 select SYS_CACHE_SHIFT_5
211 select SYS_CACHE_SHIFT_5
217 select SYS_CACHE_SHIFT_5
224 select SYS_CACHE_SHIFT_6
231 select SYS_CACHE_SHIFT_5
232 select SYS_THUMB_BUILD
238 select SYS_ARM_CACHE_CP15
240 select SYS_CACHE_SHIFT_6
244 select SYS_CACHE_SHIFT_5
249 select SYS_CACHE_SHIFT_5
253 default "arm720t" if CPU_ARM720T
254 default "arm920t" if CPU_ARM920T
255 default "arm926ejs" if CPU_ARM926EJS
256 default "arm946es" if CPU_ARM946ES
257 default "arm1136" if CPU_ARM1136
258 default "arm1176" if CPU_ARM1176
259 default "armv7" if CPU_V7A
260 default "armv7" if CPU_V7R
261 default "armv7m" if CPU_V7M
262 default "pxa" if CPU_PXA
263 default "sa1100" if CPU_SA1100
264 default "armv8" if ARM64
268 default 4 if CPU_ARM720T
269 default 4 if CPU_ARM920T
270 default 5 if CPU_ARM926EJS
271 default 5 if CPU_ARM946ES
272 default 6 if CPU_ARM1136
273 default 6 if CPU_ARM1176
278 default 4 if CPU_SA1100
281 config SYS_CACHE_SHIFT_5
284 config SYS_CACHE_SHIFT_6
287 config SYS_CACHE_SHIFT_7
290 config SYS_CACHELINE_SIZE
292 default 128 if SYS_CACHE_SHIFT_7
293 default 64 if SYS_CACHE_SHIFT_6
294 default 32 if SYS_CACHE_SHIFT_5
296 config SYS_ARCH_TIMER
297 bool "ARM Generic Timer support"
298 depends on CPU_V7A || ARM64
301 The ARM Generic Timer (aka arch-timer) provides an architected
302 interface to a timer source on an SoC.
303 It is mandantory for ARMv8 implementation and widely available
307 bool "Support for ARM SMC Calling Convention (SMCCC)"
308 depends on CPU_V7A || ARM64
311 Say Y here if you want to enable ARM SMC Calling Convention.
312 This should be enabled if U-Boot needs to communicate with system
313 firmware (for example, PSCI) according to SMCCC.
316 bool "support boot from semihosting"
318 In emulated environments, semihosting is a way for
319 the hosted environment to call out to the emulator to
320 retrieve files from the host machine.
322 config SYS_THUMB_BUILD
323 bool "Build U-Boot using the Thumb instruction set"
326 Use this flag to build U-Boot using the Thumb instruction set for
327 ARM architectures. Thumb instruction set provides better code
328 density. For ARM architectures that support Thumb2 this flag will
329 result in Thumb2 code generated by GCC.
331 config SPL_SYS_THUMB_BUILD
332 bool "Build SPL using the Thumb instruction set"
333 default y if SYS_THUMB_BUILD
336 Use this flag to build SPL using the Thumb instruction set for
337 ARM architectures. Thumb instruction set provides better code
338 density. For ARM architectures that support Thumb2 this flag will
339 result in Thumb2 code generated by GCC.
341 config SYS_L2CACHE_OFF
344 If SoC does not support L2CACHE or one do not want to enable
345 L2CACHE, choose this option.
347 config ENABLE_ARM_SOC_BOOT0_HOOK
348 bool "prepare BOOT0 header"
350 If the SoC's BOOT0 requires a header area filled with (magic)
351 values, then choose this option, and create a file included as
352 <asm/arch/boot0.h> which contains the required assembler code.
354 config ARM_CORTEX_CPU_IS_UP
358 config USE_ARCH_MEMCPY
359 bool "Use an assembly optimized implementation of memcpy"
363 Enable the generation of an optimized version of memcpy.
364 Such implementation may be faster under some conditions
365 but may increase the binary size.
367 config SPL_USE_ARCH_MEMCPY
368 bool "Use an assembly optimized implementation of memcpy for SPL"
369 default y if USE_ARCH_MEMCPY
372 Enable the generation of an optimized version of memcpy.
373 Such implementation may be faster under some conditions
374 but may increase the binary size.
376 config USE_ARCH_MEMSET
377 bool "Use an assembly optimized implementation of memset"
381 Enable the generation of an optimized version of memset.
382 Such implementation may be faster under some conditions
383 but may increase the binary size.
385 config SPL_USE_ARCH_MEMSET
386 bool "Use an assembly optimized implementation of memset for SPL"
387 default y if USE_ARCH_MEMSET
390 Enable the generation of an optimized version of memset.
391 Such implementation may be faster under some conditions
392 but may increase the binary size.
394 config ARM64_SUPPORT_AARCH32
395 bool "ARM64 system support AArch32 execution state"
396 default y if ARM64 && !TARGET_THUNDERX_88XX
398 This ARM64 system supports AArch32 execution state.
401 prompt "Target select"
406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
408 config TARGET_EDB93XX
409 bool "Support edb93xx"
413 config TARGET_ASPENITE
414 bool "Support aspenite"
418 bool "Support gplugd"
426 Support for TI's DaVinci platform.
429 bool "Marvell Kirkwood"
430 select ARCH_MISC_INIT
431 select BOARD_EARLY_INIT_F
435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
455 config TARGET_SPEAR300
456 bool "Support spear300"
457 select BOARD_EARLY_INIT_F
462 config TARGET_SPEAR310
463 bool "Support spear310"
464 select BOARD_EARLY_INIT_F
469 config TARGET_SPEAR320
470 bool "Support spear320"
471 select BOARD_EARLY_INIT_F
476 config TARGET_SPEAR600
477 bool "Support spear600"
478 select BOARD_EARLY_INIT_F
483 config TARGET_STV0991
484 bool "Support stv0991"
497 select BOARD_LATE_INIT
502 config TARGET_WOODBURN
503 bool "Support woodburn"
506 config TARGET_WOODBURN_SD
507 bool "Support woodburn_sd"
515 config TARGET_MX35PDK
516 bool "Support mx35pdk"
517 select BOARD_LATE_INIT
521 bool "Broadcom BCM283X family"
527 select SERIAL_SEARCH_ALL
532 bool "Broadcom BCM6858 family"
537 config TARGET_VEXPRESS_CA15_TC2
538 bool "Support vexpress_ca15_tc2"
540 select CPU_V7_HAS_NONSEC
541 select CPU_V7_HAS_VIRT
545 bool "Broadcom BCM7XXX family"
549 select OF_PRIOR_STAGE
552 This enables support for Broadcom ARM-based set-top box
553 chipsets, including the 7445 family of chips.
555 config TARGET_VEXPRESS_CA5X2
556 bool "Support vexpress_ca5x2"
560 config TARGET_VEXPRESS_CA9X4
561 bool "Support vexpress_ca9x4"
565 config TARGET_BCM23550_W1D
566 bool "Support bcm23550_w1d"
571 config TARGET_BCM28155_AP
572 bool "Support bcm28155_ap"
577 config TARGET_BCMCYGNUS
578 bool "Support bcmcygnus"
581 imply BCM_SF2_ETH_GMAC
589 bool "Support bcmnsp"
593 bool "Support Broadcom Northstar2"
596 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
597 ARMv8 Cortex-A57 processors targeting a broad range of networking
601 bool "Samsung EXYNOS"
610 imply SYS_THUMB_BUILD
615 bool "Samsung S5PC1XX"
624 bool "Calxeda Highbank"
628 config ARCH_INTEGRATOR
629 bool "ARM Ltd. Integrator family"
640 select SYS_ARCH_TIMER
641 select SYS_THUMB_BUILD
647 bool "Texas Instruments' K3 Architecture"
652 config ARCH_OMAP2PLUS
655 select SPL_BOARD_INIT if SPL
656 select SPL_STACK_R if SPL
662 imply DISTRO_DEFAULTS
664 Support for the Meson SoC family developed by Amlogic Inc.,
665 targeted at media players and tablet computers. We currently
666 support the S905 (GXBaby) 64-bit SoC.
674 select SPL_LIBCOMMON_SUPPORT if SPL
675 select SPL_LIBGENERIC_SUPPORT if SPL
676 select SPL_OF_CONTROL if SPL
679 Support for the MediaTek SoCs family developed by MediaTek Inc.
680 Please refer to doc/README.mediatek for more information.
683 bool "NXP LPC32xx platform"
693 bool "NXP i.MX8 platform"
699 bool "NXP i.MX8M platform"
706 bool "NXP i.MX23 family"
717 bool "NXP i.MX28 family"
723 bool "NXP i.MX31 family"
729 select ROM_UNIFIED_SECTIONS
734 select ARCH_MISC_INIT
735 select BOARD_EARLY_INIT_F
737 select SYS_FSL_HAS_SEC if SECURE_BOOT
738 select SYS_FSL_SEC_COMPAT_4
739 select SYS_FSL_SEC_LE
745 select SYS_FSL_HAS_SEC if SECURE_BOOT
746 select SYS_FSL_SEC_COMPAT_4
747 select SYS_FSL_SEC_LE
748 select SYS_THUMB_BUILD if SPL
753 default "arch/arm/mach-omap2/u-boot-spl.lds"
758 select BOARD_EARLY_INIT_F
763 bool "Actions Semi OWL SoCs"
771 bool "QEMU Virtual Platform"
781 bool "Renesas ARM SoCs"
782 select BOARD_EARLY_INIT_F
787 imply SYS_THUMB_BUILD
788 imply ARCH_MISC_INIT if DISPLAY_CPUINFO
790 config TARGET_S32V234EVB
791 bool "Support s32v234evb"
793 select SYS_FSL_ERRATUM_ESDHC111
795 config ARCH_SNAPDRAGON
796 bool "Qualcomm Snapdragon SoCs"
809 bool "Altera SOCFPGA family"
810 select ARCH_EARLY_INIT_R
811 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10
812 select ARM64 if TARGET_SOCFPGA_STRATIX10
813 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
816 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
818 select SPL_DM_RESET if DM_RESET
820 select SPL_LIBCOMMON_SUPPORT
821 select SPL_LIBGENERIC_SUPPORT
822 select SPL_NAND_SUPPORT if SPL_NAND_DENALI
823 select SPL_OF_CONTROL
824 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
825 select SPL_SERIAL_SUPPORT
826 select SPL_WATCHDOG_SUPPORT
829 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
836 imply SPL_LIBDISK_SUPPORT
837 imply SPL_MMC_SUPPORT
838 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
839 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
840 imply SPL_SPI_FLASH_SUPPORT
841 imply SPL_SPI_SUPPORT
844 bool "Support sunxi (Allwinner) SoCs"
847 select CMD_MMC if MMC
848 select CMD_USB if DISTRO_DEFAULTS
854 select DM_USB if DISTRO_DEFAULTS
855 select OF_BOARD_SETUP
858 select SPECIFY_CONSOLE_INDEX
859 select SPL_STACK_R if SPL
860 select SPL_SYS_MALLOC_SIMPLE if SPL
861 select SPL_SYS_THUMB_BUILD if !ARM64
863 select SYS_THUMB_BUILD if !ARM64
864 select USB if DISTRO_DEFAULTS
865 select USB_KEYBOARD if DISTRO_DEFAULTS
866 select USB_STORAGE if DISTRO_DEFAULTS
867 select USE_TINY_PRINTF
870 imply CMD_UBI if NAND
871 imply DISTRO_DEFAULTS
874 imply OF_LIBFDT_OVERLAY
875 imply PRE_CONSOLE_BUFFER
876 imply SPL_GPIO_SUPPORT
877 imply SPL_LIBCOMMON_SUPPORT
878 imply SPL_LIBDISK_SUPPORT
879 imply SPL_LIBGENERIC_SUPPORT
880 imply SPL_MMC_SUPPORT if MMC
881 imply SPL_POWER_SUPPORT
882 imply SPL_SERIAL_SUPPORT
886 bool "Support Xilinx Versal Platform"
894 bool "Freescale Vybrid"
896 select SYS_FSL_ERRATUM_ESDHC111
901 bool "Xilinx Zynq based platform"
902 select BOARD_EARLY_INIT_F if WDT
915 select SPL_BOARD_INIT if SPL
916 select SPL_CLK if SPL
918 select SPL_OF_CONTROL if SPL
919 select SPL_SEPARATE_BSS if SPL
921 imply ARCH_EARLY_INIT_R
922 imply BOARD_LATE_INIT
928 config ARCH_ZYNQMP_R5
929 bool "Xilinx ZynqMP R5 based platform"
939 bool "Xilinx ZynqMP based platform"
946 select SPL_BOARD_INIT if SPL
947 select SPL_CLK if SPL
948 select SPL_SEPARATE_BSS if SPL
950 imply BOARD_LATE_INIT
958 imply DISTRO_DEFAULTS
961 config TARGET_VEXPRESS64_AEMV8A
962 bool "Support vexpress_aemv8a"
966 config TARGET_VEXPRESS64_BASE_FVP
967 bool "Support Versatile Express ARMv8a FVP BASE model"
972 config TARGET_VEXPRESS64_BASE_FVP_DRAM
973 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
977 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
978 the default config to allow the user to load the images directly into
979 DRAM using model parameters rather than by using semi-hosting to load
980 the files from the host filesystem.
982 config TARGET_VEXPRESS64_JUNO
983 bool "Support Versatile Express Juno Development Platform"
987 config TARGET_LS2080A_EMU
988 bool "Support ls2080a_emu"
990 select ARCH_MISC_INIT
992 select ARMV8_MULTIENTRY
994 Support for Freescale LS2080A_EMU platform
995 The LS2080A Development System (EMULATOR) is a pre silicon
996 development platform that supports the QorIQ LS2080A
997 Layerscape Architecture processor.
999 config TARGET_LS2080A_SIMU
1000 bool "Support ls2080a_simu"
1002 select ARCH_MISC_INIT
1004 select ARMV8_MULTIENTRY
1006 Support for Freescale LS2080A_SIMU platform
1007 The LS2080A Development System (QDS) is a pre silicon
1008 development platform that supports the QorIQ LS2080A
1009 Layerscape Architecture processor.
1011 config TARGET_LS1088AQDS
1012 bool "Support ls1088aqds"
1014 select ARCH_MISC_INIT
1016 select ARMV8_MULTIENTRY
1017 select BOARD_LATE_INIT
1020 Support for NXP LS1088AQDS platform
1021 The LS1088A Development System (QDS) is a high-performance
1022 development platform that supports the QorIQ LS1088A
1023 Layerscape Architecture processor.
1025 config TARGET_LS2080AQDS
1026 bool "Support ls2080aqds"
1028 select ARCH_MISC_INIT
1030 select ARMV8_MULTIENTRY
1031 select BOARD_LATE_INIT
1036 Support for Freescale LS2080AQDS platform
1037 The LS2080A Development System (QDS) is a high-performance
1038 development platform that supports the QorIQ LS2080A
1039 Layerscape Architecture processor.
1041 config TARGET_LS2080ARDB
1042 bool "Support ls2080ardb"
1044 select ARCH_MISC_INIT
1046 select ARMV8_MULTIENTRY
1047 select BOARD_LATE_INIT
1052 Support for Freescale LS2080ARDB platform.
1053 The LS2080A Reference design board (RDB) is a high-performance
1054 development platform that supports the QorIQ LS2080A
1055 Layerscape Architecture processor.
1057 config TARGET_LS2081ARDB
1058 bool "Support ls2081ardb"
1060 select ARCH_MISC_INIT
1062 select ARMV8_MULTIENTRY
1063 select BOARD_LATE_INIT
1066 Support for Freescale LS2081ARDB platform.
1067 The LS2081A Reference design board (RDB) is a high-performance
1068 development platform that supports the QorIQ LS2081A/LS2041A
1069 Layerscape Architecture processor.
1072 bool "Support HiKey 96boards Consumer Edition Platform"
1079 select SPECIFY_CONSOLE_INDEX
1082 Support for HiKey 96boards platform. It features a HI6220
1083 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
1085 config TARGET_POPLAR
1086 bool "Support Poplar 96boards Enterprise Edition Platform"
1095 Support for Poplar 96boards EE platform. It features a HI3798cv200
1096 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
1097 making it capable of running any commercial set-top solution based on
1100 config TARGET_LS1012AQDS
1101 bool "Support ls1012aqds"
1104 select BOARD_LATE_INIT
1106 Support for Freescale LS1012AQDS platform.
1107 The LS1012A Development System (QDS) is a high-performance
1108 development platform that supports the QorIQ LS1012A
1109 Layerscape Architecture processor.
1111 config TARGET_LS1012ARDB
1112 bool "Support ls1012ardb"
1115 select BOARD_LATE_INIT
1119 Support for Freescale LS1012ARDB platform.
1120 The LS1012A Reference design board (RDB) is a high-performance
1121 development platform that supports the QorIQ LS1012A
1122 Layerscape Architecture processor.
1124 config TARGET_LS1012A2G5RDB
1125 bool "Support ls1012a2g5rdb"
1128 select BOARD_LATE_INIT
1131 Support for Freescale LS1012A2G5RDB platform.
1132 The LS1012A 2G5 Reference design board (RDB) is a high-performance
1133 development platform that supports the QorIQ LS1012A
1134 Layerscape Architecture processor.
1136 config TARGET_LS1012AFRWY
1137 bool "Support ls1012afrwy"
1140 select BOARD_LATE_INIT
1144 Support for Freescale LS1012AFRWY platform.
1145 The LS1012A FRWY board (FRWY) is a high-performance
1146 development platform that supports the QorIQ LS1012A
1147 Layerscape Architecture processor.
1149 config TARGET_LS1012AFRDM
1150 bool "Support ls1012afrdm"
1154 Support for Freescale LS1012AFRDM platform.
1155 The LS1012A Freedom board (FRDM) is a high-performance
1156 development platform that supports the QorIQ LS1012A
1157 Layerscape Architecture processor.
1159 config TARGET_LS1088ARDB
1160 bool "Support ls1088ardb"
1162 select ARCH_MISC_INIT
1164 select ARMV8_MULTIENTRY
1165 select BOARD_LATE_INIT
1168 Support for NXP LS1088ARDB platform.
1169 The LS1088A Reference design board (RDB) is a high-performance
1170 development platform that supports the QorIQ LS1088A
1171 Layerscape Architecture processor.
1173 config TARGET_LS1021AQDS
1174 bool "Support ls1021aqds"
1176 select ARCH_SUPPORT_PSCI
1177 select BOARD_EARLY_INIT_F
1178 select BOARD_LATE_INIT
1180 select CPU_V7_HAS_NONSEC
1181 select CPU_V7_HAS_VIRT
1182 select LS1_DEEP_SLEEP
1187 config TARGET_LS1021ATWR
1188 bool "Support ls1021atwr"
1190 select ARCH_SUPPORT_PSCI
1191 select BOARD_EARLY_INIT_F
1192 select BOARD_LATE_INIT
1194 select CPU_V7_HAS_NONSEC
1195 select CPU_V7_HAS_VIRT
1196 select LS1_DEEP_SLEEP
1200 config TARGET_LS1021AIOT
1201 bool "Support ls1021aiot"
1203 select ARCH_SUPPORT_PSCI
1204 select BOARD_LATE_INIT
1206 select CPU_V7_HAS_NONSEC
1207 select CPU_V7_HAS_VIRT
1211 Support for Freescale LS1021AIOT platform.
1212 The LS1021A Freescale board (IOT) is a high-performance
1213 development platform that supports the QorIQ LS1021A
1214 Layerscape Architecture processor.
1216 config TARGET_LS1043AQDS
1217 bool "Support ls1043aqds"
1220 select ARMV8_MULTIENTRY
1221 select BOARD_EARLY_INIT_F
1222 select BOARD_LATE_INIT
1226 Support for Freescale LS1043AQDS platform.
1228 config TARGET_LS1043ARDB
1229 bool "Support ls1043ardb"
1232 select ARMV8_MULTIENTRY
1233 select BOARD_EARLY_INIT_F
1234 select BOARD_LATE_INIT
1238 Support for Freescale LS1043ARDB platform.
1240 config TARGET_LS1046AQDS
1241 bool "Support ls1046aqds"
1244 select ARMV8_MULTIENTRY
1245 select BOARD_EARLY_INIT_F
1246 select BOARD_LATE_INIT
1247 select DM_SPI_FLASH if DM_SPI
1251 Support for Freescale LS1046AQDS platform.
1252 The LS1046A Development System (QDS) is a high-performance
1253 development platform that supports the QorIQ LS1046A
1254 Layerscape Architecture processor.
1256 config TARGET_LS1046ARDB
1257 bool "Support ls1046ardb"
1260 select ARMV8_MULTIENTRY
1261 select BOARD_EARLY_INIT_F
1262 select BOARD_LATE_INIT
1263 select DM_SPI_FLASH if DM_SPI
1264 select POWER_MC34VR500
1268 Support for Freescale LS1046ARDB platform.
1269 The LS1046A Reference Design Board (RDB) is a high-performance
1270 development platform that supports the QorIQ LS1046A
1271 Layerscape Architecture processor.
1274 bool "Support h2200"
1277 config TARGET_ZIPITZ2
1278 bool "Support zipitz2"
1281 config TARGET_COLIBRI_PXA270
1282 bool "Support colibri_pxa270"
1285 config ARCH_UNIPHIER
1286 bool "Socionext UniPhier SoCs"
1287 select BOARD_LATE_INIT
1295 select OF_BOARD_SETUP
1299 select SPL_BOARD_INIT if SPL
1300 select SPL_DM if SPL
1301 select SPL_LIBCOMMON_SUPPORT if SPL
1302 select SPL_LIBGENERIC_SUPPORT if SPL
1303 select SPL_OF_CONTROL if SPL
1304 select SPL_PINCTRL if SPL
1307 imply DISTRO_DEFAULTS
1310 Support for UniPhier SoC family developed by Socionext Inc.
1311 (formerly, System LSI Business Division of Panasonic Corporation)
1314 bool "Support STMicroelectronics STM32 MCU with cortex M"
1321 bool "Support STMicrolectronics SoCs"
1330 Support for STMicroelectronics STiH407/10 SoC family.
1331 This SoC is used on Linaro 96Board STiH410-B2260
1334 bool "Support STMicroelectronics STM32MP Socs with cortex A"
1335 select ARCH_MISC_INIT
1336 select BOARD_LATE_INIT
1350 select SYS_THUMB_BUILD
1353 Support for STM32MP SoC family developed by STMicroelectronics,
1354 MPUs based on ARM cortex A core
1355 U-BOOT is running in DDR and SPL support is the unsecure First Stage
1358 config ARCH_ROCKCHIP
1359 bool "Support Rockchip SoCs"
1370 select DM_USB if USB
1371 select ENABLE_ARM_SOC_BOOT0_HOOK
1374 select SPL_DM if SPL
1375 select SPL_SYS_MALLOC_SIMPLE if SPL
1377 select SYS_THUMB_BUILD if !ARM64
1380 imply DISTRO_DEFAULTS
1382 imply SARADC_ROCKCHIP
1386 imply USB_FUNCTION_FASTBOOT
1388 config TARGET_THUNDERX_88XX
1389 bool "Support ThunderX 88xx"
1393 select SYS_CACHE_SHIFT_7
1396 bool "Support Aspeed SoCs"
1403 config TI_SECURE_DEVICE
1404 bool "HS Device Type Support"
1405 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
1407 If a high secure (HS) device type is being used, this config
1408 must be set. This option impacts various aspects of the
1409 build system (to create signed boot images that can be
1410 authenticated) and the code. See the doc/README.ti-secure
1411 file for further details.
1413 source "arch/arm/mach-aspeed/Kconfig"
1415 source "arch/arm/mach-at91/Kconfig"
1417 source "arch/arm/mach-bcm283x/Kconfig"
1419 source "arch/arm/mach-bcmstb/Kconfig"
1421 source "arch/arm/mach-davinci/Kconfig"
1423 source "arch/arm/mach-exynos/Kconfig"
1425 source "arch/arm/mach-highbank/Kconfig"
1427 source "arch/arm/mach-integrator/Kconfig"
1429 source "arch/arm/mach-k3/Kconfig"
1431 source "arch/arm/mach-keystone/Kconfig"
1433 source "arch/arm/mach-kirkwood/Kconfig"
1435 source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig"
1437 source "arch/arm/mach-mvebu/Kconfig"
1439 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1441 source "arch/arm/mach-imx/mx2/Kconfig"
1443 source "arch/arm/mach-imx/mx3/Kconfig"
1445 source "arch/arm/mach-imx/mx5/Kconfig"
1447 source "arch/arm/mach-imx/mx6/Kconfig"
1449 source "arch/arm/mach-imx/mx7/Kconfig"
1451 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1453 source "arch/arm/mach-imx/imx8/Kconfig"
1455 source "arch/arm/mach-imx/mx8m/Kconfig"
1457 source "arch/arm/mach-imx/mxs/Kconfig"
1459 source "arch/arm/mach-omap2/Kconfig"
1461 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1463 source "arch/arm/mach-orion5x/Kconfig"
1465 source "arch/arm/mach-owl/Kconfig"
1467 source "arch/arm/mach-rmobile/Kconfig"
1469 source "arch/arm/mach-meson/Kconfig"
1471 source "arch/arm/mach-mediatek/Kconfig"
1473 source "arch/arm/mach-qemu/Kconfig"
1475 source "arch/arm/mach-rockchip/Kconfig"
1477 source "arch/arm/mach-s5pc1xx/Kconfig"
1479 source "arch/arm/mach-snapdragon/Kconfig"
1481 source "arch/arm/mach-socfpga/Kconfig"
1483 source "arch/arm/mach-sti/Kconfig"
1485 source "arch/arm/mach-stm32/Kconfig"
1487 source "arch/arm/mach-stm32mp/Kconfig"
1489 source "arch/arm/mach-sunxi/Kconfig"
1491 source "arch/arm/mach-tegra/Kconfig"
1493 source "arch/arm/mach-uniphier/Kconfig"
1495 source "arch/arm/cpu/armv7/vf610/Kconfig"
1497 source "arch/arm/mach-zynq/Kconfig"
1499 source "arch/arm/mach-versal/Kconfig"
1501 source "arch/arm/mach-zynqmp-r5/Kconfig"
1503 source "arch/arm/cpu/armv7/Kconfig"
1505 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1507 source "arch/arm/cpu/armv8/Kconfig"
1509 source "arch/arm/mach-imx/Kconfig"
1511 source "board/bosch/shc/Kconfig"
1512 source "board/CarMediaLab/flea3/Kconfig"
1513 source "board/Marvell/aspenite/Kconfig"
1514 source "board/Marvell/gplugd/Kconfig"
1515 source "board/armadeus/apf27/Kconfig"
1516 source "board/armltd/vexpress/Kconfig"
1517 source "board/armltd/vexpress64/Kconfig"
1518 source "board/broadcom/bcm23550_w1d/Kconfig"
1519 source "board/broadcom/bcm28155_ap/Kconfig"
1520 source "board/broadcom/bcm968580xref/Kconfig"
1521 source "board/broadcom/bcmcygnus/Kconfig"
1522 source "board/broadcom/bcmnsp/Kconfig"
1523 source "board/broadcom/bcmns2/Kconfig"
1524 source "board/cavium/thunderx/Kconfig"
1525 source "board/cirrus/edb93xx/Kconfig"
1526 source "board/eets/pdu001/Kconfig"
1527 source "board/emulation/qemu-arm/Kconfig"
1528 source "board/freescale/ls2080a/Kconfig"
1529 source "board/freescale/ls2080aqds/Kconfig"
1530 source "board/freescale/ls2080ardb/Kconfig"
1531 source "board/freescale/ls1088a/Kconfig"
1532 source "board/freescale/ls1021aqds/Kconfig"
1533 source "board/freescale/ls1043aqds/Kconfig"
1534 source "board/freescale/ls1021atwr/Kconfig"
1535 source "board/freescale/ls1021aiot/Kconfig"
1536 source "board/freescale/ls1046aqds/Kconfig"
1537 source "board/freescale/ls1043ardb/Kconfig"
1538 source "board/freescale/ls1046ardb/Kconfig"
1539 source "board/freescale/ls1012aqds/Kconfig"
1540 source "board/freescale/ls1012ardb/Kconfig"
1541 source "board/freescale/ls1012afrdm/Kconfig"
1542 source "board/freescale/mx35pdk/Kconfig"
1543 source "board/freescale/s32v234evb/Kconfig"
1544 source "board/grinn/chiliboard/Kconfig"
1545 source "board/gumstix/pepper/Kconfig"
1546 source "board/h2200/Kconfig"
1547 source "board/hisilicon/hikey/Kconfig"
1548 source "board/hisilicon/poplar/Kconfig"
1549 source "board/isee/igep003x/Kconfig"
1550 source "board/phytec/pcm051/Kconfig"
1551 source "board/silica/pengwyn/Kconfig"
1552 source "board/spear/spear300/Kconfig"
1553 source "board/spear/spear310/Kconfig"
1554 source "board/spear/spear320/Kconfig"
1555 source "board/spear/spear600/Kconfig"
1556 source "board/spear/x600/Kconfig"
1557 source "board/st/stv0991/Kconfig"
1558 source "board/tcl/sl50/Kconfig"
1559 source "board/ucRobotics/bubblegum_96/Kconfig"
1560 source "board/birdland/bav335x/Kconfig"
1561 source "board/toradex/colibri_pxa270/Kconfig"
1562 source "board/vscom/baltos/Kconfig"
1563 source "board/woodburn/Kconfig"
1564 source "board/xilinx/Kconfig"
1565 source "board/xilinx/zynq/Kconfig"
1566 source "board/xilinx/zynqmp/Kconfig"
1567 source "board/zipitz2/Kconfig"
1569 source "arch/arm/Kconfig.debug"
1574 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
1575 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1576 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64