1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
23 config SYS_INIT_SP_BSS_OFFSET
26 U-Boot typically uses a hard-coded value for the stack pointer
27 before relocation. Define this option to instead calculate the
28 initial SP at run-time. This is useful to avoid hard-coding addresses
29 into U-Boot, so that can be loaded and executed at arbitrary
30 addresses and thus avoid using arbitrary addresses at runtime. This
31 option's value is the offset added to &_bss_start in order to
32 calculate the stack pointer. This offset should be large enough so
33 that the early malloc region, global data (gd), and early stack usage
34 do not overlap any appended DTB.
36 config LINUX_KERNEL_IMAGE_HEADER
39 Place a Linux kernel image header at the start of the U-Boot binary.
40 The format of the header is described in the Linux kernel source at
41 Documentation/arm64/booting.txt. This feature is useful since the
42 image header reports the amount of memory (BSS and similar) that
43 U-Boot needs to use, but which isn't part of the binary.
45 if LINUX_KERNEL_IMAGE_HEADER
46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50 TEXT_OFFSET value written in to the Linux kernel image header.
56 default y if ARM64 && !POSITION_INDEPENDENT
58 config DMA_ADDR_T_64BIT
68 # Used for compatibility with asm files copied from the kernel
69 config ARM_ASM_UNIFIED
73 # Used for compatibility with asm files copied from the kernel
77 config SYS_ARM_CACHE_CP15
78 bool "CP15 based cache enabling support"
80 Select this if your processor suports enabling caches by using
84 bool "MMU-based Paged Memory Management Support"
85 select SYS_ARM_CACHE_CP15
87 Select if you want MMU-based virtualised addressing space
88 support by paged memory management.
91 bool 'Use the ARM v7 PMSA Compliant MPU'
93 Some ARM systems without an MMU have instead a Memory Protection
94 Unit (MPU) that defines the type and permissions for regions of
96 If your CPU has an MPU then you should choose 'y' here unless you
97 know that you do not want to use the MPU.
99 # If set, the workarounds for these ARM errata are applied early during U-Boot
100 # startup. Note that in general these options force the workarounds to be
101 # applied; no CPU-type/version detection exists, unlike the similar options in
102 # the Linux kernel. Do not set these options unless they apply! Also note that
103 # the following can be machine specific errata. These do have ability to
104 # provide rudimentary version and machine specific checks, but expect no
106 # CONFIG_ARM_ERRATA_430973
107 # CONFIG_ARM_ERRATA_454179
108 # CONFIG_ARM_ERRATA_621766
109 # CONFIG_ARM_ERRATA_798870
110 # CONFIG_ARM_ERRATA_801819
111 # CONFIG_ARM_CORTEX_A8_CVE_2017_5715
112 # CONFIG_ARM_CORTEX_A15_CVE_2017_5715
114 config ARM_ERRATA_430973
117 config ARM_ERRATA_454179
120 config ARM_ERRATA_621766
123 config ARM_ERRATA_716044
126 config ARM_ERRATA_725233
129 config ARM_ERRATA_742230
132 config ARM_ERRATA_743622
135 config ARM_ERRATA_751472
138 config ARM_ERRATA_761320
141 config ARM_ERRATA_773022
144 config ARM_ERRATA_774769
147 config ARM_ERRATA_794072
150 config ARM_ERRATA_798870
153 config ARM_ERRATA_801819
156 config ARM_ERRATA_826974
159 config ARM_ERRATA_828024
162 config ARM_ERRATA_829520
165 config ARM_ERRATA_833069
168 config ARM_ERRATA_833471
171 config ARM_ERRATA_845369
174 config ARM_ERRATA_852421
177 config ARM_ERRATA_852423
180 config ARM_ERRATA_855873
183 config ARM_CORTEX_A8_CVE_2017_5715
186 config ARM_CORTEX_A15_CVE_2017_5715
191 select SYS_CACHE_SHIFT_5
196 select SYS_CACHE_SHIFT_5
201 select SYS_CACHE_SHIFT_5
206 select SYS_CACHE_SHIFT_5
211 select SYS_CACHE_SHIFT_5
217 select SYS_CACHE_SHIFT_5
224 select SYS_CACHE_SHIFT_6
231 select SYS_CACHE_SHIFT_5
232 select SYS_THUMB_BUILD
238 select SYS_ARM_CACHE_CP15
240 select SYS_CACHE_SHIFT_6
244 select SYS_CACHE_SHIFT_5
249 select SYS_CACHE_SHIFT_5
253 default "arm720t" if CPU_ARM720T
254 default "arm920t" if CPU_ARM920T
255 default "arm926ejs" if CPU_ARM926EJS
256 default "arm946es" if CPU_ARM946ES
257 default "arm1136" if CPU_ARM1136
258 default "arm1176" if CPU_ARM1176
259 default "armv7" if CPU_V7A
260 default "armv7" if CPU_V7R
261 default "armv7m" if CPU_V7M
262 default "pxa" if CPU_PXA
263 default "sa1100" if CPU_SA1100
264 default "armv8" if ARM64
268 default 4 if CPU_ARM720T
269 default 4 if CPU_ARM920T
270 default 5 if CPU_ARM926EJS
271 default 5 if CPU_ARM946ES
272 default 6 if CPU_ARM1136
273 default 6 if CPU_ARM1176
278 default 4 if CPU_SA1100
281 config SYS_CACHE_SHIFT_5
284 config SYS_CACHE_SHIFT_6
287 config SYS_CACHE_SHIFT_7
290 config SYS_CACHELINE_SIZE
292 default 128 if SYS_CACHE_SHIFT_7
293 default 64 if SYS_CACHE_SHIFT_6
294 default 32 if SYS_CACHE_SHIFT_5
296 config SYS_ARCH_TIMER
297 bool "ARM Generic Timer support"
298 depends on CPU_V7A || ARM64
301 The ARM Generic Timer (aka arch-timer) provides an architected
302 interface to a timer source on an SoC.
303 It is mandantory for ARMv8 implementation and widely available
307 bool "Support for ARM SMC Calling Convention (SMCCC)"
308 depends on CPU_V7A || ARM64
311 Say Y here if you want to enable ARM SMC Calling Convention.
312 This should be enabled if U-Boot needs to communicate with system
313 firmware (for example, PSCI) according to SMCCC.
316 bool "support boot from semihosting"
318 In emulated environments, semihosting is a way for
319 the hosted environment to call out to the emulator to
320 retrieve files from the host machine.
322 config SYS_THUMB_BUILD
323 bool "Build U-Boot using the Thumb instruction set"
326 Use this flag to build U-Boot using the Thumb instruction set for
327 ARM architectures. Thumb instruction set provides better code
328 density. For ARM architectures that support Thumb2 this flag will
329 result in Thumb2 code generated by GCC.
331 config SPL_SYS_THUMB_BUILD
332 bool "Build SPL using the Thumb instruction set"
333 default y if SYS_THUMB_BUILD
336 Use this flag to build SPL using the Thumb instruction set for
337 ARM architectures. Thumb instruction set provides better code
338 density. For ARM architectures that support Thumb2 this flag will
339 result in Thumb2 code generated by GCC.
341 config SYS_L2CACHE_OFF
344 If SoC does not support L2CACHE or one do not want to enable
345 L2CACHE, choose this option.
347 config ENABLE_ARM_SOC_BOOT0_HOOK
348 bool "prepare BOOT0 header"
350 If the SoC's BOOT0 requires a header area filled with (magic)
351 values, then choose this option, and create a file included as
352 <asm/arch/boot0.h> which contains the required assembler code.
354 config ARM_CORTEX_CPU_IS_UP
358 config USE_ARCH_MEMCPY
359 bool "Use an assembly optimized implementation of memcpy"
363 Enable the generation of an optimized version of memcpy.
364 Such implementation may be faster under some conditions
365 but may increase the binary size.
367 config SPL_USE_ARCH_MEMCPY
368 bool "Use an assembly optimized implementation of memcpy for SPL"
369 default y if USE_ARCH_MEMCPY
372 Enable the generation of an optimized version of memcpy.
373 Such implementation may be faster under some conditions
374 but may increase the binary size.
376 config USE_ARCH_MEMSET
377 bool "Use an assembly optimized implementation of memset"
381 Enable the generation of an optimized version of memset.
382 Such implementation may be faster under some conditions
383 but may increase the binary size.
385 config SPL_USE_ARCH_MEMSET
386 bool "Use an assembly optimized implementation of memset for SPL"
387 default y if USE_ARCH_MEMSET
390 Enable the generation of an optimized version of memset.
391 Such implementation may be faster under some conditions
392 but may increase the binary size.
394 config ARM64_SUPPORT_AARCH32
395 bool "ARM64 system support AArch32 execution state"
396 default y if ARM64 && !TARGET_THUNDERX_88XX
398 This ARM64 system supports AArch32 execution state.
401 prompt "Target select"
406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
408 config TARGET_EDB93XX
409 bool "Support edb93xx"
413 config TARGET_ASPENITE
414 bool "Support aspenite"
418 bool "Support gplugd"
426 Support for TI's DaVinci platform.
429 bool "Marvell Kirkwood"
430 select ARCH_MISC_INIT
431 select BOARD_EARLY_INIT_F
435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
455 config TARGET_SPEAR300
456 bool "Support spear300"
457 select BOARD_EARLY_INIT_F
462 config TARGET_SPEAR310
463 bool "Support spear310"
464 select BOARD_EARLY_INIT_F
469 config TARGET_SPEAR320
470 bool "Support spear320"
471 select BOARD_EARLY_INIT_F
476 config TARGET_SPEAR600
477 bool "Support spear600"
478 select BOARD_EARLY_INIT_F
483 config TARGET_STV0991
484 bool "Support stv0991"
497 select BOARD_LATE_INIT
502 config TARGET_WOODBURN
503 bool "Support woodburn"
506 config TARGET_WOODBURN_SD
507 bool "Support woodburn_sd"
515 config TARGET_MX35PDK
516 bool "Support mx35pdk"
517 select BOARD_LATE_INIT
521 bool "Broadcom BCM283X family"
527 select SERIAL_SEARCH_ALL
532 bool "Broadcom BCM63158 family"
538 bool "Broadcom BCM6858 family"
543 config TARGET_VEXPRESS_CA15_TC2
544 bool "Support vexpress_ca15_tc2"
546 select CPU_V7_HAS_NONSEC
547 select CPU_V7_HAS_VIRT
551 bool "Broadcom BCM7XXX family"
555 select OF_PRIOR_STAGE
558 This enables support for Broadcom ARM-based set-top box
559 chipsets, including the 7445 family of chips.
561 config TARGET_VEXPRESS_CA5X2
562 bool "Support vexpress_ca5x2"
566 config TARGET_VEXPRESS_CA9X4
567 bool "Support vexpress_ca9x4"
571 config TARGET_BCM23550_W1D
572 bool "Support bcm23550_w1d"
577 config TARGET_BCM28155_AP
578 bool "Support bcm28155_ap"
583 config TARGET_BCMCYGNUS
584 bool "Support bcmcygnus"
587 imply BCM_SF2_ETH_GMAC
595 bool "Support bcmnsp"
599 bool "Support Broadcom Northstar2"
602 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
603 ARMv8 Cortex-A57 processors targeting a broad range of networking
607 bool "Samsung EXYNOS"
616 imply SYS_THUMB_BUILD
621 bool "Samsung S5PC1XX"
630 bool "Calxeda Highbank"
634 config ARCH_INTEGRATOR
635 bool "ARM Ltd. Integrator family"
646 select SYS_ARCH_TIMER
647 select SYS_THUMB_BUILD
653 bool "Texas Instruments' K3 Architecture"
658 config ARCH_OMAP2PLUS
661 select SPL_BOARD_INIT if SPL
662 select SPL_STACK_R if SPL
668 imply DISTRO_DEFAULTS
670 Support for the Meson SoC family developed by Amlogic Inc.,
671 targeted at media players and tablet computers. We currently
672 support the S905 (GXBaby) 64-bit SoC.
680 select SPL_LIBCOMMON_SUPPORT if SPL
681 select SPL_LIBGENERIC_SUPPORT if SPL
682 select SPL_OF_CONTROL if SPL
685 Support for the MediaTek SoCs family developed by MediaTek Inc.
686 Please refer to doc/README.mediatek for more information.
689 bool "NXP LPC32xx platform"
699 bool "NXP i.MX8 platform"
705 bool "NXP i.MX8M platform"
712 bool "NXP i.MX23 family"
723 bool "NXP i.MX28 family"
729 bool "NXP i.MX31 family"
735 select ROM_UNIFIED_SECTIONS
740 select ARCH_MISC_INIT
741 select BOARD_EARLY_INIT_F
743 select SYS_FSL_HAS_SEC if SECURE_BOOT
744 select SYS_FSL_SEC_COMPAT_4
745 select SYS_FSL_SEC_LE
751 select SYS_FSL_HAS_SEC if SECURE_BOOT
752 select SYS_FSL_SEC_COMPAT_4
753 select SYS_FSL_SEC_LE
754 select SYS_THUMB_BUILD if SPL
759 default "arch/arm/mach-omap2/u-boot-spl.lds"
764 select BOARD_EARLY_INIT_F
769 bool "Actions Semi OWL SoCs"
777 bool "QEMU Virtual Platform"
787 bool "Renesas ARM SoCs"
788 select BOARD_EARLY_INIT_F
793 imply SYS_THUMB_BUILD
794 imply ARCH_MISC_INIT if DISPLAY_CPUINFO
796 config TARGET_S32V234EVB
797 bool "Support s32v234evb"
799 select SYS_FSL_ERRATUM_ESDHC111
801 config ARCH_SNAPDRAGON
802 bool "Qualcomm Snapdragon SoCs"
815 bool "Altera SOCFPGA family"
816 select ARCH_EARLY_INIT_R
817 select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10
818 select ARM64 if TARGET_SOCFPGA_STRATIX10
819 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
822 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
824 select SPL_DM_RESET if DM_RESET
826 select SPL_LIBCOMMON_SUPPORT
827 select SPL_LIBGENERIC_SUPPORT
828 select SPL_NAND_SUPPORT if SPL_NAND_DENALI
829 select SPL_OF_CONTROL
830 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
831 select SPL_SERIAL_SUPPORT
832 select SPL_WATCHDOG_SUPPORT
835 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
842 imply SPL_LIBDISK_SUPPORT
843 imply SPL_MMC_SUPPORT
844 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
845 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
846 imply SPL_SPI_FLASH_SUPPORT
847 imply SPL_SPI_SUPPORT
850 bool "Support sunxi (Allwinner) SoCs"
853 select CMD_MMC if MMC
854 select CMD_USB if DISTRO_DEFAULTS
861 select DM_SCSI if SCSI
863 select DM_USB if DISTRO_DEFAULTS
864 select OF_BOARD_SETUP
867 select SPECIFY_CONSOLE_INDEX
868 select SPL_STACK_R if SPL
869 select SPL_SYS_MALLOC_SIMPLE if SPL
870 select SPL_SYS_THUMB_BUILD if !ARM64
872 select SYS_THUMB_BUILD if !ARM64
873 select USB if DISTRO_DEFAULTS
874 select USB_KEYBOARD if DISTRO_DEFAULTS
875 select USB_STORAGE if DISTRO_DEFAULTS
876 select USE_TINY_PRINTF
879 imply CMD_UBI if NAND
880 imply DISTRO_DEFAULTS
883 imply OF_LIBFDT_OVERLAY
884 imply PRE_CONSOLE_BUFFER
885 imply SPL_GPIO_SUPPORT
886 imply SPL_LIBCOMMON_SUPPORT
887 imply SPL_LIBGENERIC_SUPPORT
888 imply SPL_MMC_SUPPORT if MMC
889 imply SPL_POWER_SUPPORT
890 imply SPL_SERIAL_SUPPORT
894 bool "Support Xilinx Versal Platform"
904 bool "Freescale Vybrid"
906 select SYS_FSL_ERRATUM_ESDHC111
911 bool "Xilinx Zynq based platform"
912 select BOARD_EARLY_INIT_F if WDT
925 select SPL_BOARD_INIT if SPL
926 select SPL_CLK if SPL
928 select SPL_OF_CONTROL if SPL
929 select SPL_SEPARATE_BSS if SPL
931 imply ARCH_EARLY_INIT_R
932 imply BOARD_LATE_INIT
938 config ARCH_ZYNQMP_R5
939 bool "Xilinx ZynqMP R5 based platform"
951 bool "Xilinx ZynqMP based platform"
959 select DM_SPI_FLASH if DM_SPI
962 select SPL_BOARD_INIT if SPL
963 select SPL_CLK if SPL
964 select SPL_SEPARATE_BSS if SPL
966 imply BOARD_LATE_INIT
974 imply DISTRO_DEFAULTS
977 config TARGET_VEXPRESS64_AEMV8A
978 bool "Support vexpress_aemv8a"
982 config TARGET_VEXPRESS64_BASE_FVP
983 bool "Support Versatile Express ARMv8a FVP BASE model"
988 config TARGET_VEXPRESS64_BASE_FVP_DRAM
989 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
993 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
994 the default config to allow the user to load the images directly into
995 DRAM using model parameters rather than by using semi-hosting to load
996 the files from the host filesystem.
998 config TARGET_VEXPRESS64_JUNO
999 bool "Support Versatile Express Juno Development Platform"
1003 config TARGET_LS2080A_EMU
1004 bool "Support ls2080a_emu"
1006 select ARCH_MISC_INIT
1008 select ARMV8_MULTIENTRY
1009 select FSL_DDR_SYNC_REFRESH
1011 Support for Freescale LS2080A_EMU platform
1012 The LS2080A Development System (EMULATOR) is a pre silicon
1013 development platform that supports the QorIQ LS2080A
1014 Layerscape Architecture processor.
1016 config TARGET_LS2080A_SIMU
1017 bool "Support ls2080a_simu"
1019 select ARCH_MISC_INIT
1021 select ARMV8_MULTIENTRY
1023 Support for Freescale LS2080A_SIMU platform
1024 The LS2080A Development System (QDS) is a pre silicon
1025 development platform that supports the QorIQ LS2080A
1026 Layerscape Architecture processor.
1028 config TARGET_LS1088AQDS
1029 bool "Support ls1088aqds"
1031 select ARCH_MISC_INIT
1033 select ARMV8_MULTIENTRY
1034 select BOARD_LATE_INIT
1036 select FSL_DDR_INTERACTIVE if !SD_BOOT
1038 Support for NXP LS1088AQDS platform
1039 The LS1088A Development System (QDS) is a high-performance
1040 development platform that supports the QorIQ LS1088A
1041 Layerscape Architecture processor.
1043 config TARGET_LS2080AQDS
1044 bool "Support ls2080aqds"
1046 select ARCH_MISC_INIT
1048 select ARMV8_MULTIENTRY
1049 select BOARD_LATE_INIT
1054 select FSL_DDR_INTERACTIVE if !SPL
1056 Support for Freescale LS2080AQDS platform
1057 The LS2080A Development System (QDS) is a high-performance
1058 development platform that supports the QorIQ LS2080A
1059 Layerscape Architecture processor.
1061 config TARGET_LS2080ARDB
1062 bool "Support ls2080ardb"
1064 select ARCH_MISC_INIT
1066 select ARMV8_MULTIENTRY
1067 select BOARD_LATE_INIT
1070 select FSL_DDR_INTERACTIVE if !SPL
1074 Support for Freescale LS2080ARDB platform.
1075 The LS2080A Reference design board (RDB) is a high-performance
1076 development platform that supports the QorIQ LS2080A
1077 Layerscape Architecture processor.
1079 config TARGET_LS2081ARDB
1080 bool "Support ls2081ardb"
1082 select ARCH_MISC_INIT
1084 select ARMV8_MULTIENTRY
1085 select BOARD_LATE_INIT
1088 Support for Freescale LS2081ARDB platform.
1089 The LS2081A Reference design board (RDB) is a high-performance
1090 development platform that supports the QorIQ LS2081A/LS2041A
1091 Layerscape Architecture processor.
1093 config TARGET_LX2160ARDB
1094 bool "Support lx2160ardb"
1096 select ARCH_MISC_INIT
1098 select ARMV8_MULTIENTRY
1099 select BOARD_LATE_INIT
1101 Support for NXP LX2160ARDB platform.
1102 The lx2160ardb (LX2160A Reference design board (RDB)
1103 is a high-performance development platform that supports the
1104 QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
1106 config TARGET_LX2160AQDS
1107 bool "Support lx2160aqds"
1109 select ARCH_MISC_INIT
1111 select ARMV8_MULTIENTRY
1112 select BOARD_LATE_INIT
1114 Support for NXP LX2160AQDS platform.
1115 The lx2160aqds (LX2160A QorIQ Development System (QDS)
1116 is a high-performance development platform that supports the
1117 QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
1120 bool "Support HiKey 96boards Consumer Edition Platform"
1127 select SPECIFY_CONSOLE_INDEX
1130 Support for HiKey 96boards platform. It features a HI6220
1131 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
1133 config TARGET_POPLAR
1134 bool "Support Poplar 96boards Enterprise Edition Platform"
1143 Support for Poplar 96boards EE platform. It features a HI3798cv200
1144 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
1145 making it capable of running any commercial set-top solution based on
1148 config TARGET_LS1012AQDS
1149 bool "Support ls1012aqds"
1152 select BOARD_LATE_INIT
1154 Support for Freescale LS1012AQDS platform.
1155 The LS1012A Development System (QDS) is a high-performance
1156 development platform that supports the QorIQ LS1012A
1157 Layerscape Architecture processor.
1159 config TARGET_LS1012ARDB
1160 bool "Support ls1012ardb"
1163 select BOARD_LATE_INIT
1167 Support for Freescale LS1012ARDB platform.
1168 The LS1012A Reference design board (RDB) is a high-performance
1169 development platform that supports the QorIQ LS1012A
1170 Layerscape Architecture processor.
1172 config TARGET_LS1012A2G5RDB
1173 bool "Support ls1012a2g5rdb"
1176 select BOARD_LATE_INIT
1179 Support for Freescale LS1012A2G5RDB platform.
1180 The LS1012A 2G5 Reference design board (RDB) is a high-performance
1181 development platform that supports the QorIQ LS1012A
1182 Layerscape Architecture processor.
1184 config TARGET_LS1012AFRWY
1185 bool "Support ls1012afrwy"
1188 select BOARD_LATE_INIT
1192 Support for Freescale LS1012AFRWY platform.
1193 The LS1012A FRWY board (FRWY) is a high-performance
1194 development platform that supports the QorIQ LS1012A
1195 Layerscape Architecture processor.
1197 config TARGET_LS1012AFRDM
1198 bool "Support ls1012afrdm"
1202 Support for Freescale LS1012AFRDM platform.
1203 The LS1012A Freedom board (FRDM) is a high-performance
1204 development platform that supports the QorIQ LS1012A
1205 Layerscape Architecture processor.
1207 config TARGET_LS1088ARDB
1208 bool "Support ls1088ardb"
1210 select ARCH_MISC_INIT
1212 select ARMV8_MULTIENTRY
1213 select BOARD_LATE_INIT
1215 select FSL_DDR_INTERACTIVE if !SD_BOOT
1217 Support for NXP LS1088ARDB platform.
1218 The LS1088A Reference design board (RDB) is a high-performance
1219 development platform that supports the QorIQ LS1088A
1220 Layerscape Architecture processor.
1222 config TARGET_LS1021AQDS
1223 bool "Support ls1021aqds"
1225 select ARCH_SUPPORT_PSCI
1226 select BOARD_EARLY_INIT_F
1227 select BOARD_LATE_INIT
1229 select CPU_V7_HAS_NONSEC
1230 select CPU_V7_HAS_VIRT
1231 select LS1_DEEP_SLEEP
1234 select FSL_DDR_INTERACTIVE
1237 config TARGET_LS1021ATWR
1238 bool "Support ls1021atwr"
1240 select ARCH_SUPPORT_PSCI
1241 select BOARD_EARLY_INIT_F
1242 select BOARD_LATE_INIT
1244 select CPU_V7_HAS_NONSEC
1245 select CPU_V7_HAS_VIRT
1246 select LS1_DEEP_SLEEP
1250 config TARGET_LS1021AIOT
1251 bool "Support ls1021aiot"
1253 select ARCH_SUPPORT_PSCI
1254 select BOARD_LATE_INIT
1256 select CPU_V7_HAS_NONSEC
1257 select CPU_V7_HAS_VIRT
1261 Support for Freescale LS1021AIOT platform.
1262 The LS1021A Freescale board (IOT) is a high-performance
1263 development platform that supports the QorIQ LS1021A
1264 Layerscape Architecture processor.
1266 config TARGET_LS1043AQDS
1267 bool "Support ls1043aqds"
1270 select ARMV8_MULTIENTRY
1271 select BOARD_EARLY_INIT_F
1272 select BOARD_LATE_INIT
1274 select FSL_DDR_INTERACTIVE if !SPL
1278 Support for Freescale LS1043AQDS platform.
1280 config TARGET_LS1043ARDB
1281 bool "Support ls1043ardb"
1284 select ARMV8_MULTIENTRY
1285 select BOARD_EARLY_INIT_F
1286 select BOARD_LATE_INIT
1289 Support for Freescale LS1043ARDB platform.
1291 config TARGET_LS1046AQDS
1292 bool "Support ls1046aqds"
1295 select ARMV8_MULTIENTRY
1296 select BOARD_EARLY_INIT_F
1297 select BOARD_LATE_INIT
1298 select DM_SPI_FLASH if DM_SPI
1300 select FSL_DDR_BIST if !SPL
1301 select FSL_DDR_INTERACTIVE if !SPL
1302 select FSL_DDR_INTERACTIVE if !SPL
1305 Support for Freescale LS1046AQDS platform.
1306 The LS1046A Development System (QDS) is a high-performance
1307 development platform that supports the QorIQ LS1046A
1308 Layerscape Architecture processor.
1310 config TARGET_LS1046ARDB
1311 bool "Support ls1046ardb"
1314 select ARMV8_MULTIENTRY
1315 select BOARD_EARLY_INIT_F
1316 select BOARD_LATE_INIT
1317 select DM_SPI_FLASH if DM_SPI
1318 select POWER_MC34VR500
1321 select FSL_DDR_INTERACTIVE if !SPL
1324 Support for Freescale LS1046ARDB platform.
1325 The LS1046A Reference Design Board (RDB) is a high-performance
1326 development platform that supports the QorIQ LS1046A
1327 Layerscape Architecture processor.
1330 bool "Support h2200"
1333 config TARGET_ZIPITZ2
1334 bool "Support zipitz2"
1337 config TARGET_COLIBRI_PXA270
1338 bool "Support colibri_pxa270"
1341 config ARCH_UNIPHIER
1342 bool "Socionext UniPhier SoCs"
1343 select BOARD_LATE_INIT
1351 select OF_BOARD_SETUP
1355 select SPL_BOARD_INIT if SPL
1356 select SPL_DM if SPL
1357 select SPL_LIBCOMMON_SUPPORT if SPL
1358 select SPL_LIBGENERIC_SUPPORT if SPL
1359 select SPL_OF_CONTROL if SPL
1360 select SPL_PINCTRL if SPL
1363 imply DISTRO_DEFAULTS
1366 Support for UniPhier SoC family developed by Socionext Inc.
1367 (formerly, System LSI Business Division of Panasonic Corporation)
1370 bool "Support STMicroelectronics STM32 MCU with cortex M"
1377 bool "Support STMicrolectronics SoCs"
1386 Support for STMicroelectronics STiH407/10 SoC family.
1387 This SoC is used on Linaro 96Board STiH410-B2260
1390 bool "Support STMicroelectronics STM32MP Socs with cortex A"
1391 select ARCH_MISC_INIT
1392 select BOARD_LATE_INIT
1406 select SYS_THUMB_BUILD
1409 imply ENV_VARS_UBOOT_RUNTIME_CONFIG
1411 Support for STM32MP SoC family developed by STMicroelectronics,
1412 MPUs based on ARM cortex A core
1413 U-BOOT is running in DDR, loaded by the First Stage BootLoader (FSBL).
1414 FSBL can be TF-A: Trusted Firmware for Cortex A, for trusted boot
1416 SPL is the unsecure FSBL for the basic boot chain.
1418 config ARCH_ROCKCHIP
1419 bool "Support Rockchip SoCs"
1430 select DM_USB if USB
1431 select ENABLE_ARM_SOC_BOOT0_HOOK
1434 select SPL_DM if SPL
1435 select SPL_SYS_MALLOC_SIMPLE if SPL
1437 select SYS_THUMB_BUILD if !ARM64
1440 imply DISTRO_DEFAULTS
1442 imply SARADC_ROCKCHIP
1446 imply USB_FUNCTION_FASTBOOT
1448 config TARGET_THUNDERX_88XX
1449 bool "Support ThunderX 88xx"
1453 select SYS_CACHE_SHIFT_7
1456 bool "Support Aspeed SoCs"
1463 config TI_SECURE_DEVICE
1464 bool "HS Device Type Support"
1465 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
1467 If a high secure (HS) device type is being used, this config
1468 must be set. This option impacts various aspects of the
1469 build system (to create signed boot images that can be
1470 authenticated) and the code. See the doc/README.ti-secure
1471 file for further details.
1473 if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE
1474 config ISW_ENTRY_ADDR
1475 hex "Address in memory or XIP address of bootloader entry point"
1476 default 0x402F4000 if AM43XX
1477 default 0x402F0400 if AM33XX
1478 default 0x40301350 if OMAP54XX
1480 After any reset, the boot ROM searches the boot media for a valid
1481 boot image. For non-XIP devices, the ROM then copies the image into
1482 internal memory. For all boot modes, after the ROM processes the
1483 boot image it eventually computes the entry point address depending
1484 on the device type (secure/non-secure), boot media (xip/non-xip) and
1488 source "arch/arm/mach-aspeed/Kconfig"
1490 source "arch/arm/mach-at91/Kconfig"
1492 source "arch/arm/mach-bcm283x/Kconfig"
1494 source "arch/arm/mach-bcmstb/Kconfig"
1496 source "arch/arm/mach-davinci/Kconfig"
1498 source "arch/arm/mach-exynos/Kconfig"
1500 source "arch/arm/mach-highbank/Kconfig"
1502 source "arch/arm/mach-integrator/Kconfig"
1504 source "arch/arm/mach-k3/Kconfig"
1506 source "arch/arm/mach-keystone/Kconfig"
1508 source "arch/arm/mach-kirkwood/Kconfig"
1510 source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig"
1512 source "arch/arm/mach-mvebu/Kconfig"
1514 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1516 source "arch/arm/mach-imx/mx2/Kconfig"
1518 source "arch/arm/mach-imx/mx3/Kconfig"
1520 source "arch/arm/mach-imx/mx5/Kconfig"
1522 source "arch/arm/mach-imx/mx6/Kconfig"
1524 source "arch/arm/mach-imx/mx7/Kconfig"
1526 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1528 source "arch/arm/mach-imx/imx8/Kconfig"
1530 source "arch/arm/mach-imx/imx8m/Kconfig"
1532 source "arch/arm/mach-imx/mxs/Kconfig"
1534 source "arch/arm/mach-omap2/Kconfig"
1536 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1538 source "arch/arm/mach-orion5x/Kconfig"
1540 source "arch/arm/mach-owl/Kconfig"
1542 source "arch/arm/mach-rmobile/Kconfig"
1544 source "arch/arm/mach-meson/Kconfig"
1546 source "arch/arm/mach-mediatek/Kconfig"
1548 source "arch/arm/mach-qemu/Kconfig"
1550 source "arch/arm/mach-rockchip/Kconfig"
1552 source "arch/arm/mach-s5pc1xx/Kconfig"
1554 source "arch/arm/mach-snapdragon/Kconfig"
1556 source "arch/arm/mach-socfpga/Kconfig"
1558 source "arch/arm/mach-sti/Kconfig"
1560 source "arch/arm/mach-stm32/Kconfig"
1562 source "arch/arm/mach-stm32mp/Kconfig"
1564 source "arch/arm/mach-sunxi/Kconfig"
1566 source "arch/arm/mach-tegra/Kconfig"
1568 source "arch/arm/mach-uniphier/Kconfig"
1570 source "arch/arm/cpu/armv7/vf610/Kconfig"
1572 source "arch/arm/mach-zynq/Kconfig"
1574 source "arch/arm/mach-zynqmp/Kconfig"
1576 source "arch/arm/mach-versal/Kconfig"
1578 source "arch/arm/mach-zynqmp-r5/Kconfig"
1580 source "arch/arm/cpu/armv7/Kconfig"
1582 source "arch/arm/cpu/armv8/Kconfig"
1584 source "arch/arm/mach-imx/Kconfig"
1586 source "board/bosch/shc/Kconfig"
1587 source "board/bosch/guardian/Kconfig"
1588 source "board/CarMediaLab/flea3/Kconfig"
1589 source "board/Marvell/aspenite/Kconfig"
1590 source "board/Marvell/gplugd/Kconfig"
1591 source "board/armadeus/apf27/Kconfig"
1592 source "board/armltd/vexpress/Kconfig"
1593 source "board/armltd/vexpress64/Kconfig"
1594 source "board/broadcom/bcm23550_w1d/Kconfig"
1595 source "board/broadcom/bcm28155_ap/Kconfig"
1596 source "board/broadcom/bcm963158/Kconfig"
1597 source "board/broadcom/bcm968580xref/Kconfig"
1598 source "board/broadcom/bcmcygnus/Kconfig"
1599 source "board/broadcom/bcmnsp/Kconfig"
1600 source "board/broadcom/bcmns2/Kconfig"
1601 source "board/cavium/thunderx/Kconfig"
1602 source "board/cirrus/edb93xx/Kconfig"
1603 source "board/eets/pdu001/Kconfig"
1604 source "board/emulation/qemu-arm/Kconfig"
1605 source "board/freescale/ls2080a/Kconfig"
1606 source "board/freescale/ls2080aqds/Kconfig"
1607 source "board/freescale/ls2080ardb/Kconfig"
1608 source "board/freescale/ls1088a/Kconfig"
1609 source "board/freescale/ls1021aqds/Kconfig"
1610 source "board/freescale/ls1043aqds/Kconfig"
1611 source "board/freescale/ls1021atwr/Kconfig"
1612 source "board/freescale/ls1021aiot/Kconfig"
1613 source "board/freescale/ls1046aqds/Kconfig"
1614 source "board/freescale/ls1043ardb/Kconfig"
1615 source "board/freescale/ls1046ardb/Kconfig"
1616 source "board/freescale/ls1012aqds/Kconfig"
1617 source "board/freescale/ls1012ardb/Kconfig"
1618 source "board/freescale/ls1012afrdm/Kconfig"
1619 source "board/freescale/lx2160a/Kconfig"
1620 source "board/freescale/mx35pdk/Kconfig"
1621 source "board/freescale/s32v234evb/Kconfig"
1622 source "board/grinn/chiliboard/Kconfig"
1623 source "board/gumstix/pepper/Kconfig"
1624 source "board/h2200/Kconfig"
1625 source "board/hisilicon/hikey/Kconfig"
1626 source "board/hisilicon/poplar/Kconfig"
1627 source "board/isee/igep003x/Kconfig"
1628 source "board/phytec/pcm051/Kconfig"
1629 source "board/silica/pengwyn/Kconfig"
1630 source "board/spear/spear300/Kconfig"
1631 source "board/spear/spear310/Kconfig"
1632 source "board/spear/spear320/Kconfig"
1633 source "board/spear/spear600/Kconfig"
1634 source "board/spear/x600/Kconfig"
1635 source "board/st/stv0991/Kconfig"
1636 source "board/tcl/sl50/Kconfig"
1637 source "board/ucRobotics/bubblegum_96/Kconfig"
1638 source "board/birdland/bav335x/Kconfig"
1639 source "board/toradex/colibri_pxa270/Kconfig"
1640 source "board/vscom/baltos/Kconfig"
1641 source "board/woodburn/Kconfig"
1642 source "board/xilinx/Kconfig"
1643 source "board/xilinx/zynq/Kconfig"
1644 source "board/xilinx/zynqmp/Kconfig"
1645 source "board/zipitz2/Kconfig"
1647 source "arch/arm/Kconfig.debug"
1652 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
1653 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1654 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64