1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
26 default y if ARM64 && !POSITION_INDEPENDENT
28 config DMA_ADDR_T_64BIT
38 # Used for compatibility with asm files copied from the kernel
39 config ARM_ASM_UNIFIED
43 # Used for compatibility with asm files copied from the kernel
47 # If set, the workarounds for these ARM errata are applied early during U-Boot
48 # startup. Note that in general these options force the workarounds to be
49 # applied; no CPU-type/version detection exists, unlike the similar options in
50 # the Linux kernel. Do not set these options unless they apply! Also note that
51 # the following can be machine specific errata. These do have ability to
52 # provide rudimentary version and machine specific checks, but expect no
54 # CONFIG_ARM_ERRATA_430973
55 # CONFIG_ARM_ERRATA_454179
56 # CONFIG_ARM_ERRATA_621766
57 # CONFIG_ARM_ERRATA_798870
58 # CONFIG_ARM_ERRATA_801819
59 config ARM_ERRATA_430973
62 config ARM_ERRATA_454179
65 config ARM_ERRATA_621766
68 config ARM_ERRATA_716044
71 config ARM_ERRATA_725233
74 config ARM_ERRATA_742230
77 config ARM_ERRATA_743622
80 config ARM_ERRATA_751472
83 config ARM_ERRATA_761320
86 config ARM_ERRATA_773022
89 config ARM_ERRATA_774769
92 config ARM_ERRATA_794072
95 config ARM_ERRATA_798870
98 config ARM_ERRATA_801819
101 config ARM_ERRATA_826974
104 config ARM_ERRATA_828024
107 config ARM_ERRATA_829520
110 config ARM_ERRATA_833069
113 config ARM_ERRATA_833471
116 config ARM_ERRATA_845369
119 config ARM_ERRATA_852421
122 config ARM_ERRATA_852423
127 select SYS_CACHE_SHIFT_5
131 select SYS_CACHE_SHIFT_5
135 select SYS_CACHE_SHIFT_5
139 select SYS_CACHE_SHIFT_5
143 select SYS_CACHE_SHIFT_5
148 select SYS_CACHE_SHIFT_5
154 select SYS_CACHE_SHIFT_6
160 select SYS_CACHE_SHIFT_5
164 select SYS_CACHE_SHIFT_5
168 select SYS_CACHE_SHIFT_5
171 default "arm720t" if CPU_ARM720T
172 default "arm920t" if CPU_ARM920T
173 default "arm926ejs" if CPU_ARM926EJS
174 default "arm946es" if CPU_ARM946ES
175 default "arm1136" if CPU_ARM1136
176 default "arm1176" if CPU_ARM1176
177 default "armv7" if CPU_V7
178 default "armv7m" if CPU_V7M
179 default "pxa" if CPU_PXA
180 default "sa1100" if CPU_SA1100
181 default "armv8" if ARM64
185 default 4 if CPU_ARM720T
186 default 4 if CPU_ARM920T
187 default 5 if CPU_ARM926EJS
188 default 5 if CPU_ARM946ES
189 default 6 if CPU_ARM1136
190 default 6 if CPU_ARM1176
194 default 4 if CPU_SA1100
197 config SYS_CACHE_SHIFT_5
200 config SYS_CACHE_SHIFT_6
203 config SYS_CACHE_SHIFT_7
206 config SYS_CACHELINE_SIZE
208 default 128 if SYS_CACHE_SHIFT_7
209 default 64 if SYS_CACHE_SHIFT_6
210 default 32 if SYS_CACHE_SHIFT_5
213 bool "Support for ARM SMC Calling Convention (SMCCC)"
214 depends on CPU_V7 || ARM64
217 Say Y here if you want to enable ARM SMC Calling Convention.
218 This should be enabled if U-Boot needs to communicate with system
219 firmware (for example, PSCI) according to SMCCC.
222 bool "support boot from semihosting"
224 In emulated environments, semihosting is a way for
225 the hosted environment to call out to the emulator to
226 retrieve files from the host machine.
228 config SYS_THUMB_BUILD
229 bool "Build U-Boot using the Thumb instruction set"
232 Use this flag to build U-Boot using the Thumb instruction set for
233 ARM architectures. Thumb instruction set provides better code
234 density. For ARM architectures that support Thumb2 this flag will
235 result in Thumb2 code generated by GCC.
237 config SPL_SYS_THUMB_BUILD
238 bool "Build SPL using the Thumb instruction set"
239 default y if SYS_THUMB_BUILD
242 Use this flag to build SPL using the Thumb instruction set for
243 ARM architectures. Thumb instruction set provides better code
244 density. For ARM architectures that support Thumb2 this flag will
245 result in Thumb2 code generated by GCC.
247 config SYS_L2CACHE_OFF
250 If SoC does not support L2CACHE or one do not want to enable
251 L2CACHE, choose this option.
253 config ENABLE_ARM_SOC_BOOT0_HOOK
254 bool "prepare BOOT0 header"
256 If the SoC's BOOT0 requires a header area filled with (magic)
257 values, then choose this option, and create a define called
258 ARM_SOC_BOOT0_HOOK which contains the required assembler
261 config ARM_CORTEX_CPU_IS_UP
265 config USE_ARCH_MEMCPY
266 bool "Use an assembly optimized implementation of memcpy"
270 Enable the generation of an optimized version of memcpy.
271 Such implementation may be faster under some conditions
272 but may increase the binary size.
274 config SPL_USE_ARCH_MEMCPY
275 bool "Use an assembly optimized implementation of memcpy for SPL"
276 default y if USE_ARCH_MEMCPY
279 Enable the generation of an optimized version of memcpy.
280 Such implementation may be faster under some conditions
281 but may increase the binary size.
283 config USE_ARCH_MEMSET
284 bool "Use an assembly optimized implementation of memset"
288 Enable the generation of an optimized version of memset.
289 Such implementation may be faster under some conditions
290 but may increase the binary size.
292 config SPL_USE_ARCH_MEMSET
293 bool "Use an assembly optimized implementation of memset for SPL"
294 default y if USE_ARCH_MEMSET
297 Enable the generation of an optimized version of memset.
298 Such implementation may be faster under some conditions
299 but may increase the binary size.
301 config ARM64_SUPPORT_AARCH32
302 bool "ARM64 system support AArch32 execution state"
303 default y if ARM64 && !TARGET_THUNDERX_88XX
305 This ARM64 system supports AArch32 execution state.
308 prompt "Target select"
313 select SPL_BOARD_INIT if SPL
315 config TARGET_EDB93XX
316 bool "Support edb93xx"
319 config TARGET_ASPENITE
320 bool "Support aspenite"
324 bool "Support gplugd"
332 Support for TI's DaVinci platform.
335 bool "Marvell Kirkwood"
337 select BOARD_EARLY_INIT_F
338 select ARCH_MISC_INIT
341 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
350 config TARGET_DEVKIT3250
351 bool "Support devkit3250"
355 config TARGET_WORK_92105
356 bool "Support work_92105"
365 config TARGET_APX4DEVKIT
366 bool "Support apx4devkit"
376 bool "Support m28evk"
380 config TARGET_MX23EVK
381 bool "Support mx23evk"
384 select BOARD_EARLY_INIT_F
386 config TARGET_MX28EVK
387 bool "Support mx28evk"
390 select BOARD_EARLY_INIT_F
392 config TARGET_MX23_OLINUXINO
393 bool "Support mx23_olinuxino"
396 select BOARD_EARLY_INIT_F
399 bool "Support bg0900"
403 config TARGET_SANSA_FUZE_PLUS
404 bool "Support sansa_fuze_plus"
408 config TARGET_SC_SPS_1
409 bool "Support sc_sps_1"
417 config TARGET_SPEAR300
418 bool "Support spear300"
420 select BOARD_EARLY_INIT_F
423 config TARGET_SPEAR310
424 bool "Support spear310"
426 select BOARD_EARLY_INIT_F
429 config TARGET_SPEAR320
430 bool "Support spear320"
432 select BOARD_EARLY_INIT_F
435 config TARGET_SPEAR600
436 bool "Support spear600"
438 select BOARD_EARLY_INIT_F
441 config TARGET_STV0991
442 bool "Support stv0991"
452 select BOARD_LATE_INIT
456 config TARGET_IMX31_PHYCORE
457 bool "Support imx31_phycore_eet"
459 select BOARD_EARLY_INIT_F
461 config TARGET_IMX31_PHYCORE_EET
462 bool "Support imx31_phycore_eet"
463 select BOARD_LATE_INIT
465 select BOARD_EARLY_INIT_F
467 config TARGET_MX31ADS
468 bool "Support mx31ads"
470 select BOARD_EARLY_INIT_F
472 config TARGET_MX31PDK
473 bool "Support mx31pdk"
474 select BOARD_LATE_INIT
477 select BOARD_EARLY_INIT_F
479 config TARGET_WOODBURN
480 bool "Support woodburn"
483 config TARGET_WOODBURN_SD
484 bool "Support woodburn_sd"
492 config TARGET_MX35PDK
493 bool "Support mx35pdk"
494 select BOARD_LATE_INIT
498 bool "Broadcom BCM283X family"
505 config TARGET_VEXPRESS_CA15_TC2
506 bool "Support vexpress_ca15_tc2"
508 select CPU_V7_HAS_NONSEC
509 select CPU_V7_HAS_VIRT
511 config TARGET_VEXPRESS_CA5X2
512 bool "Support vexpress_ca5x2"
515 config TARGET_VEXPRESS_CA9X4
516 bool "Support vexpress_ca9x4"
519 config TARGET_BCM23550_W1D
520 bool "Support bcm23550_w1d"
525 config TARGET_BCM28155_AP
526 bool "Support bcm28155_ap"
531 config TARGET_BCMCYGNUS
532 bool "Support bcmcygnus"
540 imply BCM_SF2_ETH_GMAC
543 bool "Support bcmnsp"
547 bool "Support Broadcom Northstar2"
550 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
551 ARMv8 Cortex-A57 processors targeting a broad range of networking
555 bool "Samsung EXYNOS"
566 bool "Samsung S5PC1XX"
574 bool "Calxeda Highbank"
577 config ARCH_INTEGRATOR
578 bool "ARM Ltd. Integrator family"
586 select SYS_THUMB_BUILD
592 config ARCH_OMAP2PLUS
595 select SPL_BOARD_INIT if SPL
596 select SPL_STACK_R if SPL
603 Support for the Meson SoC family developed by Amlogic Inc.,
604 targeted at media players and tablet computers. We currently
605 support the S905 (GXBaby) 64-bit SoC.
614 select ROM_UNIFIED_SECTIONS
619 select SYS_FSL_HAS_SEC if SECURE_BOOT
620 select SYS_FSL_SEC_COMPAT_4
621 select SYS_FSL_SEC_LE
622 select BOARD_EARLY_INIT_F
623 select ARCH_MISC_INIT
628 select SYS_FSL_HAS_SEC if SECURE_BOOT
629 select SYS_FSL_SEC_COMPAT_4
630 select SYS_FSL_SEC_LE
631 select SYS_THUMB_BUILD if SPL
635 default "arch/arm/mach-omap2/u-boot-spl.lds"
641 select BOARD_EARLY_INIT_F
644 bool "QEMU Virtual Platform"
646 select ARCH_SUPPORT_PSCI
652 bool "Renesas ARM SoCs"
655 select BOARD_EARLY_INIT_F
657 imply SYS_THUMB_BUILD
659 config TARGET_S32V234EVB
660 bool "Support s32v234evb"
662 select SYS_FSL_ERRATUM_ESDHC111
664 config ARCH_SNAPDRAGON
665 bool "Qualcomm Snapdragon SoCs"
675 bool "Altera SOCFPGA family"
679 select SPL_OF_CONTROL
683 select ENABLE_ARM_SOC_BOOT0_HOOK
684 select ARCH_EARLY_INIT_R
685 select ARCH_MISC_INIT
686 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
687 select SYS_THUMB_BUILD
693 bool "Support sunxi (Allwinner) SoCs"
696 select CMD_MMC if MMC
697 select CMD_USB if DISTRO_DEFAULTS
703 select DM_USB if DISTRO_DEFAULTS
704 select OF_BOARD_SETUP
707 select SPL_STACK_R if SPL
708 select SPL_SYS_MALLOC_SIMPLE if SPL
710 select SPL_SYS_THUMB_BUILD if !ARM64
711 select SYS_THUMB_BUILD if !ARM64
712 select USB if DISTRO_DEFAULTS
713 select USB_STORAGE if DISTRO_DEFAULTS
714 select USB_KEYBOARD if DISTRO_DEFAULTS
715 select USE_TINY_PRINTF
718 imply PRE_CONSOLE_BUFFER
719 imply SPL_GPIO_SUPPORT
720 imply SPL_LIBCOMMON_SUPPORT
721 imply SPL_LIBDISK_SUPPORT
722 imply SPL_LIBGENERIC_SUPPORT
723 imply SPL_MMC_SUPPORT if MMC
724 imply SPL_POWER_SUPPORT
725 imply SPL_SERIAL_SUPPORT
729 bool "Support TS4600"
734 bool "Freescale Vybrid"
736 select SYS_FSL_ERRATUM_ESDHC111
741 bool "Xilinx Zynq based platform"
742 select BOARD_LATE_INIT
746 select SPL_BOARD_INIT if SPL
747 select SPL_OF_CONTROL if SPL
756 select SPL_SEPARATE_BSS if SPL
767 bool "Xilinx ZynqMP based platform"
769 select BOARD_LATE_INIT
775 select SPL_BOARD_INIT if SPL
784 config TARGET_VEXPRESS64_AEMV8A
785 bool "Support vexpress_aemv8a"
788 config TARGET_VEXPRESS64_BASE_FVP
789 bool "Support Versatile Express ARMv8a FVP BASE model"
793 config TARGET_VEXPRESS64_BASE_FVP_DRAM
794 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
797 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
798 the default config to allow the user to load the images directly into
799 DRAM using model parameters rather than by using semi-hosting to load
800 the files from the host filesystem.
802 config TARGET_VEXPRESS64_JUNO
803 bool "Support Versatile Express Juno Development Platform"
806 config TARGET_LS2080A_EMU
807 bool "Support ls2080a_emu"
810 select ARMV8_MULTIENTRY
811 select ARCH_MISC_INIT
813 Support for Freescale LS2080A_EMU platform
814 The LS2080A Development System (EMULATOR) is a pre silicon
815 development platform that supports the QorIQ LS2080A
816 Layerscape Architecture processor.
818 config TARGET_LS2080A_SIMU
819 bool "Support ls2080a_simu"
822 select ARMV8_MULTIENTRY
823 select ARCH_MISC_INIT
825 Support for Freescale LS2080A_SIMU platform
826 The LS2080A Development System (QDS) is a pre silicon
827 development platform that supports the QorIQ LS2080A
828 Layerscape Architecture processor.
830 config TARGET_LS1088AQDS
831 bool "Support ls1088aqds"
834 select ARMV8_MULTIENTRY
835 select ARCH_MISC_INIT
836 select BOARD_LATE_INIT
839 Support for NXP LS1088AQDS platform
840 The LS1088A Development System (QDS) is a high-performance
841 development platform that supports the QorIQ LS1088A
842 Layerscape Architecture processor.
844 config TARGET_LS2080AQDS
845 bool "Support ls2080aqds"
848 select ARMV8_MULTIENTRY
849 select BOARD_LATE_INIT
851 select ARCH_MISC_INIT
854 Support for Freescale LS2080AQDS platform
855 The LS2080A Development System (QDS) is a high-performance
856 development platform that supports the QorIQ LS2080A
857 Layerscape Architecture processor.
859 config TARGET_LS2080ARDB
860 bool "Support ls2080ardb"
863 select ARMV8_MULTIENTRY
864 select BOARD_LATE_INIT
866 select ARCH_MISC_INIT
869 Support for Freescale LS2080ARDB platform.
870 The LS2080A Reference design board (RDB) is a high-performance
871 development platform that supports the QorIQ LS2080A
872 Layerscape Architecture processor.
874 config TARGET_LS2081ARDB
875 bool "Support ls2081ardb"
878 select ARMV8_MULTIENTRY
879 select BOARD_LATE_INIT
881 select ARCH_MISC_INIT
883 Support for Freescale LS2081ARDB platform.
884 The LS2081A Reference design board (RDB) is a high-performance
885 development platform that supports the QorIQ LS2081A/LS2041A
886 Layerscape Architecture processor.
889 bool "Support HiKey 96boards Consumer Edition Platform"
896 Support for HiKey 96boards platform. It features a HI6220
897 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
900 bool "Support Poplar 96boards Enterprise Edition Platform"
907 Support for Poplar 96boards EE platform. It features a HI3798cv200
908 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
909 making it capable of running any commercial set-top solution based on
912 config TARGET_LS1012AQDS
913 bool "Support ls1012aqds"
916 select BOARD_LATE_INIT
918 Support for Freescale LS1012AQDS platform.
919 The LS1012A Development System (QDS) is a high-performance
920 development platform that supports the QorIQ LS1012A
921 Layerscape Architecture processor.
923 config TARGET_LS1012ARDB
924 bool "Support ls1012ardb"
927 select BOARD_LATE_INIT
930 Support for Freescale LS1012ARDB platform.
931 The LS1012A Reference design board (RDB) is a high-performance
932 development platform that supports the QorIQ LS1012A
933 Layerscape Architecture processor.
935 config TARGET_LS1012AFRDM
936 bool "Support ls1012afrdm"
940 Support for Freescale LS1012AFRDM platform.
941 The LS1012A Freedom board (FRDM) is a high-performance
942 development platform that supports the QorIQ LS1012A
943 Layerscape Architecture processor.
945 config TARGET_LS1088ARDB
946 bool "Support ls1088ardb"
949 select ARMV8_MULTIENTRY
950 select ARCH_MISC_INIT
951 select BOARD_LATE_INIT
954 Support for NXP LS1088ARDB platform.
955 The LS1088A Reference design board (RDB) is a high-performance
956 development platform that supports the QorIQ LS1088A
957 Layerscape Architecture processor.
959 config TARGET_LS1021AQDS
960 bool "Support ls1021aqds"
961 select BOARD_LATE_INIT
963 select CPU_V7_HAS_NONSEC
964 select CPU_V7_HAS_VIRT
967 select ARCH_SUPPORT_PSCI
968 select LS1_DEEP_SLEEP
970 select BOARD_EARLY_INIT_F
973 config TARGET_LS1021ATWR
974 bool "Support ls1021atwr"
975 select BOARD_LATE_INIT
977 select CPU_V7_HAS_NONSEC
978 select CPU_V7_HAS_VIRT
981 select ARCH_SUPPORT_PSCI
982 select LS1_DEEP_SLEEP
983 select BOARD_EARLY_INIT_F
986 config TARGET_LS1021AIOT
987 bool "Support ls1021aiot"
988 select BOARD_LATE_INIT
990 select CPU_V7_HAS_NONSEC
991 select CPU_V7_HAS_VIRT
994 select ARCH_SUPPORT_PSCI
997 Support for Freescale LS1021AIOT platform.
998 The LS1021A Freescale board (IOT) is a high-performance
999 development platform that supports the QorIQ LS1021A
1000 Layerscape Architecture processor.
1002 config TARGET_LS1043AQDS
1003 bool "Support ls1043aqds"
1006 select ARMV8_MULTIENTRY
1007 select BOARD_LATE_INIT
1009 select BOARD_EARLY_INIT_F
1012 Support for Freescale LS1043AQDS platform.
1014 config TARGET_LS1043ARDB
1015 bool "Support ls1043ardb"
1018 select ARMV8_MULTIENTRY
1019 select BOARD_LATE_INIT
1021 select BOARD_EARLY_INIT_F
1024 Support for Freescale LS1043ARDB platform.
1026 config TARGET_LS1046AQDS
1027 bool "Support ls1046aqds"
1030 select ARMV8_MULTIENTRY
1031 select BOARD_LATE_INIT
1033 select DM_SPI_FLASH if DM_SPI
1034 select BOARD_EARLY_INIT_F
1037 Support for Freescale LS1046AQDS platform.
1038 The LS1046A Development System (QDS) is a high-performance
1039 development platform that supports the QorIQ LS1046A
1040 Layerscape Architecture processor.
1042 config TARGET_LS1046ARDB
1043 bool "Support ls1046ardb"
1046 select ARMV8_MULTIENTRY
1047 select BOARD_LATE_INIT
1049 select DM_SPI_FLASH if DM_SPI
1050 select POWER_MC34VR500
1051 select BOARD_EARLY_INIT_F
1054 Support for Freescale LS1046ARDB platform.
1055 The LS1046A Reference Design Board (RDB) is a high-performance
1056 development platform that supports the QorIQ LS1046A
1057 Layerscape Architecture processor.
1060 bool "Support h2200"
1063 config TARGET_ZIPITZ2
1064 bool "Support zipitz2"
1067 config TARGET_COLIBRI_PXA270
1068 bool "Support colibri_pxa270"
1071 config ARCH_UNIPHIER
1072 bool "Socionext UniPhier SoCs"
1073 select BOARD_LATE_INIT
1084 select SPL_BOARD_INIT if SPL
1085 select SPL_DM if SPL
1086 select SPL_LIBCOMMON_SUPPORT if SPL
1087 select SPL_LIBGENERIC_SUPPORT if SPL
1088 select SPL_OF_CONTROL if SPL
1089 select SPL_PINCTRL if SPL
1093 Support for UniPhier SoC family developed by Socionext Inc.
1094 (formerly, System LSI Business Division of Panasonic Corporation)
1097 bool "Support STM32"
1101 select SYS_THUMB_BUILD
1104 bool "Support STMicrolectronics SoCs"
1112 Support for STMicroelectronics STiH407/10 SoC family.
1113 This SoC is used on Linaro 96Board STiH410-B2260
1115 config ARCH_ROCKCHIP
1116 bool "Support Rockchip SoCs"
1120 select SPL_DM if SPL
1122 select SYS_THUMB_BUILD if !ARM64
1123 select SPL_SYS_MALLOC_SIMPLE if SPL
1130 select DM_USB if USB
1133 select ENABLE_ARM_SOC_BOOT0_HOOK
1137 imply USB_FUNCTION_FASTBOOT
1141 imply SARADC_ROCKCHIP
1143 config TARGET_THUNDERX_88XX
1144 bool "Support ThunderX 88xx"
1147 select SYS_CACHE_SHIFT_7
1150 bool "Support Aspeed SoCs"
1156 source "arch/arm/mach-aspeed/Kconfig"
1158 source "arch/arm/mach-at91/Kconfig"
1160 source "arch/arm/mach-bcm283x/Kconfig"
1162 source "arch/arm/mach-davinci/Kconfig"
1164 source "arch/arm/mach-exynos/Kconfig"
1166 source "arch/arm/mach-highbank/Kconfig"
1168 source "arch/arm/mach-integrator/Kconfig"
1170 source "arch/arm/mach-keystone/Kconfig"
1172 source "arch/arm/mach-kirkwood/Kconfig"
1174 source "arch/arm/mach-mvebu/Kconfig"
1176 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1178 source "arch/arm/mach-imx/mx2/Kconfig"
1180 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1182 source "arch/arm/mach-imx/mx7/Kconfig"
1184 source "arch/arm/mach-imx/mx6/Kconfig"
1186 source "arch/arm/mach-imx/mx5/Kconfig"
1188 source "arch/arm/mach-omap2/Kconfig"
1190 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1192 source "arch/arm/mach-orion5x/Kconfig"
1194 source "arch/arm/mach-rmobile/Kconfig"
1196 source "arch/arm/mach-meson/Kconfig"
1198 source "arch/arm/mach-qemu/Kconfig"
1200 source "arch/arm/mach-rockchip/Kconfig"
1202 source "arch/arm/mach-s5pc1xx/Kconfig"
1204 source "arch/arm/mach-snapdragon/Kconfig"
1206 source "arch/arm/mach-socfpga/Kconfig"
1208 source "arch/arm/mach-sti/Kconfig"
1210 source "arch/arm/mach-stm32/Kconfig"
1212 source "arch/arm/mach-sunxi/Kconfig"
1214 source "arch/arm/mach-tegra/Kconfig"
1216 source "arch/arm/mach-uniphier/Kconfig"
1218 source "arch/arm/cpu/armv7/vf610/Kconfig"
1220 source "arch/arm/mach-zynq/Kconfig"
1222 source "arch/arm/cpu/armv7/Kconfig"
1224 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1226 source "arch/arm/cpu/armv8/Kconfig"
1228 source "arch/arm/mach-imx/Kconfig"
1230 source "board/aries/m28evk/Kconfig"
1231 source "board/bosch/shc/Kconfig"
1232 source "board/CarMediaLab/flea3/Kconfig"
1233 source "board/Marvell/aspenite/Kconfig"
1234 source "board/Marvell/gplugd/Kconfig"
1235 source "board/armadeus/apf27/Kconfig"
1236 source "board/armltd/vexpress/Kconfig"
1237 source "board/armltd/vexpress64/Kconfig"
1238 source "board/bluegiga/apx4devkit/Kconfig"
1239 source "board/broadcom/bcm23550_w1d/Kconfig"
1240 source "board/broadcom/bcm28155_ap/Kconfig"
1241 source "board/broadcom/bcmcygnus/Kconfig"
1242 source "board/broadcom/bcmnsp/Kconfig"
1243 source "board/broadcom/bcmns2/Kconfig"
1244 source "board/cavium/thunderx/Kconfig"
1245 source "board/cirrus/edb93xx/Kconfig"
1246 source "board/creative/xfi3/Kconfig"
1247 source "board/freescale/ls2080a/Kconfig"
1248 source "board/freescale/ls2080aqds/Kconfig"
1249 source "board/freescale/ls2080ardb/Kconfig"
1250 source "board/freescale/ls1088a/Kconfig"
1251 source "board/freescale/ls1021aqds/Kconfig"
1252 source "board/freescale/ls1043aqds/Kconfig"
1253 source "board/freescale/ls1021atwr/Kconfig"
1254 source "board/freescale/ls1021aiot/Kconfig"
1255 source "board/freescale/ls1046aqds/Kconfig"
1256 source "board/freescale/ls1043ardb/Kconfig"
1257 source "board/freescale/ls1046ardb/Kconfig"
1258 source "board/freescale/ls1012aqds/Kconfig"
1259 source "board/freescale/ls1012ardb/Kconfig"
1260 source "board/freescale/ls1012afrdm/Kconfig"
1261 source "board/freescale/mx23evk/Kconfig"
1262 source "board/freescale/mx28evk/Kconfig"
1263 source "board/freescale/mx31ads/Kconfig"
1264 source "board/freescale/mx31pdk/Kconfig"
1265 source "board/freescale/mx35pdk/Kconfig"
1266 source "board/freescale/s32v234evb/Kconfig"
1267 source "board/gdsys/a38x/Kconfig"
1268 source "board/grinn/chiliboard/Kconfig"
1269 source "board/gumstix/pepper/Kconfig"
1270 source "board/h2200/Kconfig"
1271 source "board/hisilicon/hikey/Kconfig"
1272 source "board/hisilicon/poplar/Kconfig"
1273 source "board/imx31_phycore/Kconfig"
1274 source "board/isee/igep003x/Kconfig"
1275 source "board/olimex/mx23_olinuxino/Kconfig"
1276 source "board/phytec/pcm051/Kconfig"
1277 source "board/ppcag/bg0900/Kconfig"
1278 source "board/sandisk/sansa_fuze_plus/Kconfig"
1279 source "board/schulercontrol/sc_sps_1/Kconfig"
1280 source "board/silica/pengwyn/Kconfig"
1281 source "board/spear/spear300/Kconfig"
1282 source "board/spear/spear310/Kconfig"
1283 source "board/spear/spear320/Kconfig"
1284 source "board/spear/spear600/Kconfig"
1285 source "board/spear/x600/Kconfig"
1286 source "board/st/stv0991/Kconfig"
1287 source "board/tcl/sl50/Kconfig"
1288 source "board/birdland/bav335x/Kconfig"
1289 source "board/timll/devkit3250/Kconfig"
1290 source "board/toradex/colibri_pxa270/Kconfig"
1291 source "board/technologic/ts4600/Kconfig"
1292 source "board/vscom/baltos/Kconfig"
1293 source "board/woodburn/Kconfig"
1294 source "board/work-microwave/work_92105/Kconfig"
1295 source "board/zipitz2/Kconfig"
1297 source "arch/arm/Kconfig.debug"
1302 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
1303 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1304 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64