1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
23 config SYS_INIT_SP_BSS_OFFSET
26 U-Boot typically uses a hard-coded value for the stack pointer
27 before relocation. Define this option to instead calculate the
28 initial SP at run-time. This is useful to avoid hard-coding addresses
29 into U-Boot, so that can be loaded and executed at arbitrary
30 addresses and thus avoid using arbitrary addresses at runtime. This
31 option's value is the offset added to &_bss_start in order to
32 calculate the stack pointer. This offset should be large enough so
33 that the early malloc region, global data (gd), and early stack usage
34 do not overlap any appended DTB.
36 config LINUX_KERNEL_IMAGE_HEADER
39 Place a Linux kernel image header at the start of the U-Boot binary.
40 The format of the header is described in the Linux kernel source at
41 Documentation/arm64/booting.txt. This feature is useful since the
42 image header reports the amount of memory (BSS and similar) that
43 U-Boot needs to use, but which isn't part of the binary.
45 if LINUX_KERNEL_IMAGE_HEADER
46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50 TEXT_OFFSET value written in to the Linux kernel image header.
56 default y if ARM64 && !POSITION_INDEPENDENT
58 config DMA_ADDR_T_64BIT
68 # Used for compatibility with asm files copied from the kernel
69 config ARM_ASM_UNIFIED
73 # Used for compatibility with asm files copied from the kernel
77 # If set, the workarounds for these ARM errata are applied early during U-Boot
78 # startup. Note that in general these options force the workarounds to be
79 # applied; no CPU-type/version detection exists, unlike the similar options in
80 # the Linux kernel. Do not set these options unless they apply! Also note that
81 # the following can be machine specific errata. These do have ability to
82 # provide rudimentary version and machine specific checks, but expect no
84 # CONFIG_ARM_ERRATA_430973
85 # CONFIG_ARM_ERRATA_454179
86 # CONFIG_ARM_ERRATA_621766
87 # CONFIG_ARM_ERRATA_798870
88 # CONFIG_ARM_ERRATA_801819
89 config ARM_ERRATA_430973
92 config ARM_ERRATA_454179
95 config ARM_ERRATA_621766
98 config ARM_ERRATA_716044
101 config ARM_ERRATA_725233
104 config ARM_ERRATA_742230
107 config ARM_ERRATA_743622
110 config ARM_ERRATA_751472
113 config ARM_ERRATA_761320
116 config ARM_ERRATA_773022
119 config ARM_ERRATA_774769
122 config ARM_ERRATA_794072
125 config ARM_ERRATA_798870
128 config ARM_ERRATA_801819
131 config ARM_ERRATA_826974
134 config ARM_ERRATA_828024
137 config ARM_ERRATA_829520
140 config ARM_ERRATA_833069
143 config ARM_ERRATA_833471
146 config ARM_ERRATA_845369
149 config ARM_ERRATA_852421
152 config ARM_ERRATA_852423
155 config ARM_ERRATA_855873
160 select SYS_CACHE_SHIFT_5
164 select SYS_CACHE_SHIFT_5
168 select SYS_CACHE_SHIFT_5
172 select SYS_CACHE_SHIFT_5
176 select SYS_CACHE_SHIFT_5
181 select SYS_CACHE_SHIFT_5
187 select SYS_CACHE_SHIFT_6
193 select SYS_CACHE_SHIFT_5
197 select SYS_CACHE_SHIFT_5
201 select SYS_CACHE_SHIFT_5
204 default "arm720t" if CPU_ARM720T
205 default "arm920t" if CPU_ARM920T
206 default "arm926ejs" if CPU_ARM926EJS
207 default "arm946es" if CPU_ARM946ES
208 default "arm1136" if CPU_ARM1136
209 default "arm1176" if CPU_ARM1176
210 default "armv7" if CPU_V7
211 default "armv7m" if CPU_V7M
212 default "pxa" if CPU_PXA
213 default "sa1100" if CPU_SA1100
214 default "armv8" if ARM64
218 default 4 if CPU_ARM720T
219 default 4 if CPU_ARM920T
220 default 5 if CPU_ARM926EJS
221 default 5 if CPU_ARM946ES
222 default 6 if CPU_ARM1136
223 default 6 if CPU_ARM1176
227 default 4 if CPU_SA1100
230 config SYS_CACHE_SHIFT_5
233 config SYS_CACHE_SHIFT_6
236 config SYS_CACHE_SHIFT_7
239 config SYS_CACHELINE_SIZE
241 default 128 if SYS_CACHE_SHIFT_7
242 default 64 if SYS_CACHE_SHIFT_6
243 default 32 if SYS_CACHE_SHIFT_5
246 bool "Support for ARM SMC Calling Convention (SMCCC)"
247 depends on CPU_V7 || ARM64
250 Say Y here if you want to enable ARM SMC Calling Convention.
251 This should be enabled if U-Boot needs to communicate with system
252 firmware (for example, PSCI) according to SMCCC.
255 bool "support boot from semihosting"
257 In emulated environments, semihosting is a way for
258 the hosted environment to call out to the emulator to
259 retrieve files from the host machine.
261 config SYS_THUMB_BUILD
262 bool "Build U-Boot using the Thumb instruction set"
265 Use this flag to build U-Boot using the Thumb instruction set for
266 ARM architectures. Thumb instruction set provides better code
267 density. For ARM architectures that support Thumb2 this flag will
268 result in Thumb2 code generated by GCC.
270 config SPL_SYS_THUMB_BUILD
271 bool "Build SPL using the Thumb instruction set"
272 default y if SYS_THUMB_BUILD
275 Use this flag to build SPL using the Thumb instruction set for
276 ARM architectures. Thumb instruction set provides better code
277 density. For ARM architectures that support Thumb2 this flag will
278 result in Thumb2 code generated by GCC.
280 config SYS_L2CACHE_OFF
283 If SoC does not support L2CACHE or one do not want to enable
284 L2CACHE, choose this option.
286 config ENABLE_ARM_SOC_BOOT0_HOOK
287 bool "prepare BOOT0 header"
289 If the SoC's BOOT0 requires a header area filled with (magic)
290 values, then choose this option, and create a define called
291 ARM_SOC_BOOT0_HOOK which contains the required assembler
294 config ARM_CORTEX_CPU_IS_UP
298 config USE_ARCH_MEMCPY
299 bool "Use an assembly optimized implementation of memcpy"
303 Enable the generation of an optimized version of memcpy.
304 Such implementation may be faster under some conditions
305 but may increase the binary size.
307 config SPL_USE_ARCH_MEMCPY
308 bool "Use an assembly optimized implementation of memcpy for SPL"
309 default y if USE_ARCH_MEMCPY
312 Enable the generation of an optimized version of memcpy.
313 Such implementation may be faster under some conditions
314 but may increase the binary size.
316 config USE_ARCH_MEMSET
317 bool "Use an assembly optimized implementation of memset"
321 Enable the generation of an optimized version of memset.
322 Such implementation may be faster under some conditions
323 but may increase the binary size.
325 config SPL_USE_ARCH_MEMSET
326 bool "Use an assembly optimized implementation of memset for SPL"
327 default y if USE_ARCH_MEMSET
330 Enable the generation of an optimized version of memset.
331 Such implementation may be faster under some conditions
332 but may increase the binary size.
334 config ARM64_SUPPORT_AARCH32
335 bool "ARM64 system support AArch32 execution state"
336 default y if ARM64 && !TARGET_THUNDERX_88XX
338 This ARM64 system supports AArch32 execution state.
341 prompt "Target select"
346 select SPL_BOARD_INIT if SPL
348 config TARGET_EDB93XX
349 bool "Support edb93xx"
353 config TARGET_ASPENITE
354 bool "Support aspenite"
358 bool "Support gplugd"
366 Support for TI's DaVinci platform.
369 bool "Marvell Kirkwood"
371 select BOARD_EARLY_INIT_F
372 select ARCH_MISC_INIT
375 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
384 config TARGET_DEVKIT3250
385 bool "Support devkit3250"
389 config TARGET_WORK_92105
390 bool "Support work_92105"
399 config TARGET_APX4DEVKIT
400 bool "Support apx4devkit"
406 bool "Support m28evk"
411 config TARGET_MX28EVK
412 bool "Support mx28evk"
415 select BOARD_EARLY_INIT_F
419 bool "Support bg0900"
424 config TARGET_SC_SPS_1
425 bool "Support sc_sps_1"
434 config TARGET_SPEAR300
435 bool "Support spear300"
437 select BOARD_EARLY_INIT_F
441 config TARGET_SPEAR310
442 bool "Support spear310"
444 select BOARD_EARLY_INIT_F
448 config TARGET_SPEAR320
449 bool "Support spear320"
451 select BOARD_EARLY_INIT_F
455 config TARGET_SPEAR600
456 bool "Support spear600"
458 select BOARD_EARLY_INIT_F
462 config TARGET_STV0991
463 bool "Support stv0991"
474 select BOARD_LATE_INIT
479 config TARGET_IMX31_PHYCORE
480 bool "Support imx31_phycore_eet"
482 select BOARD_EARLY_INIT_F
484 config TARGET_IMX31_PHYCORE_EET
485 bool "Support imx31_phycore_eet"
486 select BOARD_LATE_INIT
488 select BOARD_EARLY_INIT_F
490 config TARGET_MX31ADS
491 bool "Support mx31ads"
493 select BOARD_EARLY_INIT_F
495 config TARGET_MX31PDK
496 bool "Support mx31pdk"
497 select BOARD_LATE_INIT
500 select BOARD_EARLY_INIT_F
502 config TARGET_WOODBURN
503 bool "Support woodburn"
506 config TARGET_WOODBURN_SD
507 bool "Support woodburn_sd"
515 config TARGET_MX35PDK
516 bool "Support mx35pdk"
517 select BOARD_LATE_INIT
521 bool "Broadcom BCM283X family"
527 select SERIAL_SEARCH_ALL
530 config TARGET_VEXPRESS_CA15_TC2
531 bool "Support vexpress_ca15_tc2"
533 select CPU_V7_HAS_NONSEC
534 select CPU_V7_HAS_VIRT
537 config TARGET_VEXPRESS_CA5X2
538 bool "Support vexpress_ca5x2"
542 config TARGET_VEXPRESS_CA9X4
543 bool "Support vexpress_ca9x4"
547 config TARGET_BCM23550_W1D
548 bool "Support bcm23550_w1d"
553 config TARGET_BCM28155_AP
554 bool "Support bcm28155_ap"
559 config TARGET_BCMCYGNUS
560 bool "Support bcmcygnus"
568 imply BCM_SF2_ETH_GMAC
571 bool "Support bcmnsp"
575 bool "Support Broadcom Northstar2"
578 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
579 ARMv8 Cortex-A57 processors targeting a broad range of networking
583 bool "Samsung EXYNOS"
594 bool "Samsung S5PC1XX"
602 bool "Calxeda Highbank"
606 config ARCH_INTEGRATOR
607 bool "ARM Ltd. Integrator family"
616 select SYS_THUMB_BUILD
622 config ARCH_OMAP2PLUS
625 select SPL_BOARD_INIT if SPL
626 select SPL_STACK_R if SPL
633 Support for the Meson SoC family developed by Amlogic Inc.,
634 targeted at media players and tablet computers. We currently
635 support the S905 (GXBaby) 64-bit SoC.
638 bool "NXP i.MX8M platform"
644 bool "NXP i.MX23 family"
657 select ROM_UNIFIED_SECTIONS
663 select SYS_FSL_HAS_SEC if SECURE_BOOT
664 select SYS_FSL_SEC_COMPAT_4
665 select SYS_FSL_SEC_LE
666 select BOARD_EARLY_INIT_F
667 select ARCH_MISC_INIT
673 select SYS_FSL_HAS_SEC if SECURE_BOOT
674 select SYS_FSL_SEC_COMPAT_4
675 select SYS_FSL_SEC_LE
676 select SYS_THUMB_BUILD if SPL
681 default "arch/arm/mach-omap2/u-boot-spl.lds"
687 select BOARD_EARLY_INIT_F
691 bool "QEMU Virtual Platform"
698 bool "Renesas ARM SoCs"
701 select BOARD_EARLY_INIT_F
703 imply SYS_THUMB_BUILD
705 config TARGET_S32V234EVB
706 bool "Support s32v234evb"
708 select SYS_FSL_ERRATUM_ESDHC111
710 config ARCH_SNAPDRAGON
711 bool "Qualcomm Snapdragon SoCs"
721 bool "Altera SOCFPGA family"
725 select SPL_OF_CONTROL
729 select ENABLE_ARM_SOC_BOOT0_HOOK
730 select ARCH_EARLY_INIT_R
731 select ARCH_MISC_INIT
732 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
733 select SYS_THUMB_BUILD
739 bool "Support sunxi (Allwinner) SoCs"
742 select CMD_MMC if MMC
743 select CMD_USB if DISTRO_DEFAULTS
749 select DM_USB if DISTRO_DEFAULTS
750 select OF_BOARD_SETUP
753 select SPL_STACK_R if SPL
754 select SPL_SYS_MALLOC_SIMPLE if SPL
756 select SPL_SYS_THUMB_BUILD if !ARM64
757 select SYS_THUMB_BUILD if !ARM64
758 select USB if DISTRO_DEFAULTS
759 select USB_STORAGE if DISTRO_DEFAULTS
760 select USB_KEYBOARD if DISTRO_DEFAULTS
761 select USE_TINY_PRINTF
764 imply OF_LIBFDT_OVERLAY
765 imply PRE_CONSOLE_BUFFER
766 imply SPL_GPIO_SUPPORT
767 imply SPL_LIBCOMMON_SUPPORT
768 imply SPL_LIBDISK_SUPPORT
769 imply SPL_LIBGENERIC_SUPPORT
770 imply SPL_MMC_SUPPORT if MMC
771 imply SPL_POWER_SUPPORT
772 imply SPL_SERIAL_SUPPORT
776 bool "Support TS4600"
782 bool "Freescale Vybrid"
784 select SYS_FSL_ERRATUM_ESDHC111
789 bool "Xilinx Zynq based platform"
790 select BOARD_LATE_INIT
794 select SPL_BOARD_INIT if SPL
795 select SPL_OF_CONTROL if SPL
803 select SPL_SEPARATE_BSS if SPL
806 select SPL_CLK if SPL
813 bool "Xilinx ZynqMP based platform"
815 select BOARD_LATE_INIT
821 select SPL_BOARD_INIT if SPL
822 select SPL_CLK if SPL
830 config TARGET_VEXPRESS64_AEMV8A
831 bool "Support vexpress_aemv8a"
835 config TARGET_VEXPRESS64_BASE_FVP
836 bool "Support Versatile Express ARMv8a FVP BASE model"
841 config TARGET_VEXPRESS64_BASE_FVP_DRAM
842 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
846 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
847 the default config to allow the user to load the images directly into
848 DRAM using model parameters rather than by using semi-hosting to load
849 the files from the host filesystem.
851 config TARGET_VEXPRESS64_JUNO
852 bool "Support Versatile Express Juno Development Platform"
856 config TARGET_LS2080A_EMU
857 bool "Support ls2080a_emu"
860 select ARMV8_MULTIENTRY
861 select ARCH_MISC_INIT
863 Support for Freescale LS2080A_EMU platform
864 The LS2080A Development System (EMULATOR) is a pre silicon
865 development platform that supports the QorIQ LS2080A
866 Layerscape Architecture processor.
868 config TARGET_LS2080A_SIMU
869 bool "Support ls2080a_simu"
872 select ARMV8_MULTIENTRY
873 select ARCH_MISC_INIT
875 Support for Freescale LS2080A_SIMU platform
876 The LS2080A Development System (QDS) is a pre silicon
877 development platform that supports the QorIQ LS2080A
878 Layerscape Architecture processor.
880 config TARGET_LS1088AQDS
881 bool "Support ls1088aqds"
884 select ARMV8_MULTIENTRY
885 select ARCH_MISC_INIT
886 select BOARD_LATE_INIT
889 Support for NXP LS1088AQDS platform
890 The LS1088A Development System (QDS) is a high-performance
891 development platform that supports the QorIQ LS1088A
892 Layerscape Architecture processor.
894 config TARGET_LS2080AQDS
895 bool "Support ls2080aqds"
898 select ARMV8_MULTIENTRY
899 select BOARD_LATE_INIT
901 select ARCH_MISC_INIT
905 Support for Freescale LS2080AQDS platform
906 The LS2080A Development System (QDS) is a high-performance
907 development platform that supports the QorIQ LS2080A
908 Layerscape Architecture processor.
910 config TARGET_LS2080ARDB
911 bool "Support ls2080ardb"
914 select ARMV8_MULTIENTRY
915 select BOARD_LATE_INIT
917 select ARCH_MISC_INIT
921 Support for Freescale LS2080ARDB platform.
922 The LS2080A Reference design board (RDB) is a high-performance
923 development platform that supports the QorIQ LS2080A
924 Layerscape Architecture processor.
926 config TARGET_LS2081ARDB
927 bool "Support ls2081ardb"
930 select ARMV8_MULTIENTRY
931 select BOARD_LATE_INIT
933 select ARCH_MISC_INIT
935 Support for Freescale LS2081ARDB platform.
936 The LS2081A Reference design board (RDB) is a high-performance
937 development platform that supports the QorIQ LS2081A/LS2041A
938 Layerscape Architecture processor.
941 bool "Support HiKey 96boards Consumer Edition Platform"
949 Support for HiKey 96boards platform. It features a HI6220
950 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
953 bool "Support Poplar 96boards Enterprise Edition Platform"
961 Support for Poplar 96boards EE platform. It features a HI3798cv200
962 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
963 making it capable of running any commercial set-top solution based on
966 config TARGET_LS1012AQDS
967 bool "Support ls1012aqds"
970 select BOARD_LATE_INIT
972 Support for Freescale LS1012AQDS platform.
973 The LS1012A Development System (QDS) is a high-performance
974 development platform that supports the QorIQ LS1012A
975 Layerscape Architecture processor.
977 config TARGET_LS1012ARDB
978 bool "Support ls1012ardb"
981 select BOARD_LATE_INIT
985 Support for Freescale LS1012ARDB platform.
986 The LS1012A Reference design board (RDB) is a high-performance
987 development platform that supports the QorIQ LS1012A
988 Layerscape Architecture processor.
990 config TARGET_LS1012A2G5RDB
991 bool "Support ls1012a2g5rdb"
994 select BOARD_LATE_INIT
997 Support for Freescale LS1012A2G5RDB platform.
998 The LS1012A 2G5 Reference design board (RDB) is a high-performance
999 development platform that supports the QorIQ LS1012A
1000 Layerscape Architecture processor.
1002 config TARGET_LS1012AFRDM
1003 bool "Support ls1012afrdm"
1007 Support for Freescale LS1012AFRDM platform.
1008 The LS1012A Freedom board (FRDM) is a high-performance
1009 development platform that supports the QorIQ LS1012A
1010 Layerscape Architecture processor.
1012 config TARGET_LS1088ARDB
1013 bool "Support ls1088ardb"
1016 select ARMV8_MULTIENTRY
1017 select ARCH_MISC_INIT
1018 select BOARD_LATE_INIT
1021 Support for NXP LS1088ARDB platform.
1022 The LS1088A Reference design board (RDB) is a high-performance
1023 development platform that supports the QorIQ LS1088A
1024 Layerscape Architecture processor.
1026 config TARGET_LS1021AQDS
1027 bool "Support ls1021aqds"
1028 select BOARD_LATE_INIT
1030 select CPU_V7_HAS_NONSEC
1031 select CPU_V7_HAS_VIRT
1034 select ARCH_SUPPORT_PSCI
1035 select LS1_DEEP_SLEEP
1037 select BOARD_EARLY_INIT_F
1040 config TARGET_LS1021ATWR
1041 bool "Support ls1021atwr"
1042 select BOARD_LATE_INIT
1044 select CPU_V7_HAS_NONSEC
1045 select CPU_V7_HAS_VIRT
1048 select ARCH_SUPPORT_PSCI
1049 select LS1_DEEP_SLEEP
1050 select BOARD_EARLY_INIT_F
1053 config TARGET_LS1021AIOT
1054 bool "Support ls1021aiot"
1055 select BOARD_LATE_INIT
1057 select CPU_V7_HAS_NONSEC
1058 select CPU_V7_HAS_VIRT
1061 select ARCH_SUPPORT_PSCI
1064 Support for Freescale LS1021AIOT platform.
1065 The LS1021A Freescale board (IOT) is a high-performance
1066 development platform that supports the QorIQ LS1021A
1067 Layerscape Architecture processor.
1069 config TARGET_LS1043AQDS
1070 bool "Support ls1043aqds"
1073 select ARMV8_MULTIENTRY
1074 select BOARD_LATE_INIT
1076 select BOARD_EARLY_INIT_F
1079 Support for Freescale LS1043AQDS platform.
1081 config TARGET_LS1043ARDB
1082 bool "Support ls1043ardb"
1085 select ARMV8_MULTIENTRY
1086 select BOARD_LATE_INIT
1088 select BOARD_EARLY_INIT_F
1091 Support for Freescale LS1043ARDB platform.
1093 config TARGET_LS1046AQDS
1094 bool "Support ls1046aqds"
1097 select ARMV8_MULTIENTRY
1098 select BOARD_LATE_INIT
1100 select DM_SPI_FLASH if DM_SPI
1101 select BOARD_EARLY_INIT_F
1104 Support for Freescale LS1046AQDS platform.
1105 The LS1046A Development System (QDS) is a high-performance
1106 development platform that supports the QorIQ LS1046A
1107 Layerscape Architecture processor.
1109 config TARGET_LS1046ARDB
1110 bool "Support ls1046ardb"
1113 select ARMV8_MULTIENTRY
1114 select BOARD_LATE_INIT
1116 select DM_SPI_FLASH if DM_SPI
1117 select POWER_MC34VR500
1118 select BOARD_EARLY_INIT_F
1121 Support for Freescale LS1046ARDB platform.
1122 The LS1046A Reference Design Board (RDB) is a high-performance
1123 development platform that supports the QorIQ LS1046A
1124 Layerscape Architecture processor.
1127 bool "Support h2200"
1130 config TARGET_ZIPITZ2
1131 bool "Support zipitz2"
1134 config TARGET_COLIBRI_PXA270
1135 bool "Support colibri_pxa270"
1138 config ARCH_UNIPHIER
1139 bool "Socionext UniPhier SoCs"
1140 select BOARD_LATE_INIT
1151 select SPL_BOARD_INIT if SPL
1152 select SPL_DM if SPL
1153 select SPL_LIBCOMMON_SUPPORT if SPL
1154 select SPL_LIBGENERIC_SUPPORT if SPL
1155 select SPL_OF_CONTROL if SPL
1156 select SPL_PINCTRL if SPL
1160 Support for UniPhier SoC family developed by Socionext Inc.
1161 (formerly, System LSI Business Division of Panasonic Corporation)
1164 bool "Support STM32"
1168 select SYS_THUMB_BUILD
1171 bool "Support STMicrolectronics SoCs"
1179 Support for STMicroelectronics STiH407/10 SoC family.
1180 This SoC is used on Linaro 96Board STiH410-B2260
1182 config ARCH_ROCKCHIP
1183 bool "Support Rockchip SoCs"
1187 select SPL_DM if SPL
1189 select SYS_THUMB_BUILD if !ARM64
1190 select SPL_SYS_MALLOC_SIMPLE if SPL
1197 select DM_USB if USB
1200 select ENABLE_ARM_SOC_BOOT0_HOOK
1204 imply USB_FUNCTION_FASTBOOT
1208 imply SARADC_ROCKCHIP
1210 config TARGET_THUNDERX_88XX
1211 bool "Support ThunderX 88xx"
1214 select SYS_CACHE_SHIFT_7
1218 bool "Support Aspeed SoCs"
1224 source "arch/arm/mach-aspeed/Kconfig"
1226 source "arch/arm/mach-at91/Kconfig"
1228 source "arch/arm/mach-bcm283x/Kconfig"
1230 source "arch/arm/mach-davinci/Kconfig"
1232 source "arch/arm/mach-exynos/Kconfig"
1234 source "arch/arm/mach-highbank/Kconfig"
1236 source "arch/arm/mach-integrator/Kconfig"
1238 source "arch/arm/mach-keystone/Kconfig"
1240 source "arch/arm/mach-kirkwood/Kconfig"
1242 source "arch/arm/mach-mvebu/Kconfig"
1244 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1246 source "arch/arm/mach-imx/mx2/Kconfig"
1248 source "arch/arm/mach-imx/mx5/Kconfig"
1250 source "arch/arm/mach-imx/mx6/Kconfig"
1252 source "arch/arm/mach-imx/mx7/Kconfig"
1254 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1256 source "arch/arm/mach-imx/mx8m/Kconfig"
1258 source "arch/arm/mach-imx/mxs/Kconfig"
1260 source "arch/arm/mach-omap2/Kconfig"
1262 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1264 source "arch/arm/mach-orion5x/Kconfig"
1266 source "arch/arm/mach-rmobile/Kconfig"
1268 source "arch/arm/mach-meson/Kconfig"
1270 source "arch/arm/mach-qemu/Kconfig"
1272 source "arch/arm/mach-rockchip/Kconfig"
1274 source "arch/arm/mach-s5pc1xx/Kconfig"
1276 source "arch/arm/mach-snapdragon/Kconfig"
1278 source "arch/arm/mach-socfpga/Kconfig"
1280 source "arch/arm/mach-sti/Kconfig"
1282 source "arch/arm/mach-stm32/Kconfig"
1284 source "arch/arm/mach-sunxi/Kconfig"
1286 source "arch/arm/mach-tegra/Kconfig"
1288 source "arch/arm/mach-uniphier/Kconfig"
1290 source "arch/arm/cpu/armv7/vf610/Kconfig"
1292 source "arch/arm/mach-zynq/Kconfig"
1294 source "arch/arm/cpu/armv7/Kconfig"
1296 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1298 source "arch/arm/cpu/armv8/Kconfig"
1300 source "arch/arm/mach-imx/Kconfig"
1302 source "board/aries/m28evk/Kconfig"
1303 source "board/bosch/shc/Kconfig"
1304 source "board/CarMediaLab/flea3/Kconfig"
1305 source "board/Marvell/aspenite/Kconfig"
1306 source "board/Marvell/gplugd/Kconfig"
1307 source "board/armadeus/apf27/Kconfig"
1308 source "board/armltd/vexpress/Kconfig"
1309 source "board/armltd/vexpress64/Kconfig"
1310 source "board/bluegiga/apx4devkit/Kconfig"
1311 source "board/broadcom/bcm23550_w1d/Kconfig"
1312 source "board/broadcom/bcm28155_ap/Kconfig"
1313 source "board/broadcom/bcmcygnus/Kconfig"
1314 source "board/broadcom/bcmnsp/Kconfig"
1315 source "board/broadcom/bcmns2/Kconfig"
1316 source "board/cavium/thunderx/Kconfig"
1317 source "board/cirrus/edb93xx/Kconfig"
1318 source "board/eets/pdu001/Kconfig"
1319 source "board/freescale/ls2080a/Kconfig"
1320 source "board/freescale/ls2080aqds/Kconfig"
1321 source "board/freescale/ls2080ardb/Kconfig"
1322 source "board/freescale/ls1088a/Kconfig"
1323 source "board/freescale/ls1021aqds/Kconfig"
1324 source "board/freescale/ls1043aqds/Kconfig"
1325 source "board/freescale/ls1021atwr/Kconfig"
1326 source "board/freescale/ls1021aiot/Kconfig"
1327 source "board/freescale/ls1046aqds/Kconfig"
1328 source "board/freescale/ls1043ardb/Kconfig"
1329 source "board/freescale/ls1046ardb/Kconfig"
1330 source "board/freescale/ls1012aqds/Kconfig"
1331 source "board/freescale/ls1012ardb/Kconfig"
1332 source "board/freescale/ls1012afrdm/Kconfig"
1333 source "board/freescale/mx28evk/Kconfig"
1334 source "board/freescale/mx31ads/Kconfig"
1335 source "board/freescale/mx31pdk/Kconfig"
1336 source "board/freescale/mx35pdk/Kconfig"
1337 source "board/freescale/s32v234evb/Kconfig"
1338 source "board/gdsys/a38x/Kconfig"
1339 source "board/grinn/chiliboard/Kconfig"
1340 source "board/gumstix/pepper/Kconfig"
1341 source "board/h2200/Kconfig"
1342 source "board/hisilicon/hikey/Kconfig"
1343 source "board/hisilicon/poplar/Kconfig"
1344 source "board/imx31_phycore/Kconfig"
1345 source "board/isee/igep003x/Kconfig"
1346 source "board/phytec/pcm051/Kconfig"
1347 source "board/ppcag/bg0900/Kconfig"
1348 source "board/schulercontrol/sc_sps_1/Kconfig"
1349 source "board/silica/pengwyn/Kconfig"
1350 source "board/spear/spear300/Kconfig"
1351 source "board/spear/spear310/Kconfig"
1352 source "board/spear/spear320/Kconfig"
1353 source "board/spear/spear600/Kconfig"
1354 source "board/spear/x600/Kconfig"
1355 source "board/st/stv0991/Kconfig"
1356 source "board/tcl/sl50/Kconfig"
1357 source "board/birdland/bav335x/Kconfig"
1358 source "board/timll/devkit3250/Kconfig"
1359 source "board/toradex/colibri_pxa270/Kconfig"
1360 source "board/technologic/ts4600/Kconfig"
1361 source "board/vscom/baltos/Kconfig"
1362 source "board/woodburn/Kconfig"
1363 source "board/work-microwave/work_92105/Kconfig"
1364 source "board/zipitz2/Kconfig"
1366 source "arch/arm/Kconfig.debug"
1371 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
1372 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1373 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64