1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
23 config SYS_INIT_SP_BSS_OFFSET
26 U-Boot typically uses a hard-coded value for the stack pointer
27 before relocation. Define this option to instead calculate the
28 initial SP at run-time. This is useful to avoid hard-coding addresses
29 into U-Boot, so that can be loaded and executed at arbitrary
30 addresses and thus avoid using arbitrary addresses at runtime. This
31 option's value is the offset added to &_bss_start in order to
32 calculate the stack pointer. This offset should be large enough so
33 that the early malloc region, global data (gd), and early stack usage
34 do not overlap any appended DTB.
36 config LINUX_KERNEL_IMAGE_HEADER
39 Place a Linux kernel image header at the start of the U-Boot binary.
40 The format of the header is described in the Linux kernel source at
41 Documentation/arm64/booting.txt. This feature is useful since the
42 image header reports the amount of memory (BSS and similar) that
43 U-Boot needs to use, but which isn't part of the binary.
45 if LINUX_KERNEL_IMAGE_HEADER
46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50 TEXT_OFFSET value written in to the Linux kernel image header.
56 default y if ARM64 && !POSITION_INDEPENDENT
58 config DMA_ADDR_T_64BIT
68 # Used for compatibility with asm files copied from the kernel
69 config ARM_ASM_UNIFIED
73 # Used for compatibility with asm files copied from the kernel
77 config SYS_ARM_CACHE_CP15
78 bool "CP15 based cache enabling support"
80 Select this if your processor suports enabling caches by using
84 bool "MMU-based Paged Memory Management Support"
85 select SYS_ARM_CACHE_CP15
87 Select if you want MMU-based virtualised addressing space
88 support by paged memory management.
91 bool 'Use the ARM v7 PMSA Compliant MPU'
93 Some ARM systems without an MMU have instead a Memory Protection
94 Unit (MPU) that defines the type and permissions for regions of
96 If your CPU has an MPU then you should choose 'y' here unless you
97 know that you do not want to use the MPU.
99 # If set, the workarounds for these ARM errata are applied early during U-Boot
100 # startup. Note that in general these options force the workarounds to be
101 # applied; no CPU-type/version detection exists, unlike the similar options in
102 # the Linux kernel. Do not set these options unless they apply! Also note that
103 # the following can be machine specific errata. These do have ability to
104 # provide rudimentary version and machine specific checks, but expect no
106 # CONFIG_ARM_ERRATA_430973
107 # CONFIG_ARM_ERRATA_454179
108 # CONFIG_ARM_ERRATA_621766
109 # CONFIG_ARM_ERRATA_798870
110 # CONFIG_ARM_ERRATA_801819
111 # CONFIG_ARM_CORTEX_A8_CVE_2017_5715
112 # CONFIG_ARM_CORTEX_A15_CVE_2017_5715
114 config ARM_ERRATA_430973
117 config ARM_ERRATA_454179
120 config ARM_ERRATA_621766
123 config ARM_ERRATA_716044
126 config ARM_ERRATA_725233
129 config ARM_ERRATA_742230
132 config ARM_ERRATA_743622
135 config ARM_ERRATA_751472
138 config ARM_ERRATA_761320
141 config ARM_ERRATA_773022
144 config ARM_ERRATA_774769
147 config ARM_ERRATA_794072
150 config ARM_ERRATA_798870
153 config ARM_ERRATA_801819
156 config ARM_ERRATA_826974
159 config ARM_ERRATA_828024
162 config ARM_ERRATA_829520
165 config ARM_ERRATA_833069
168 config ARM_ERRATA_833471
171 config ARM_ERRATA_845369
174 config ARM_ERRATA_852421
177 config ARM_ERRATA_852423
180 config ARM_ERRATA_855873
183 config ARM_CORTEX_A8_CVE_2017_5715
186 config ARM_CORTEX_A15_CVE_2017_5715
191 select SYS_CACHE_SHIFT_5
196 select SYS_CACHE_SHIFT_5
201 select SYS_CACHE_SHIFT_5
206 select SYS_CACHE_SHIFT_5
211 select SYS_CACHE_SHIFT_5
217 select SYS_CACHE_SHIFT_5
224 select SYS_CACHE_SHIFT_6
231 select SYS_CACHE_SHIFT_5
232 select SYS_THUMB_BUILD
238 select SYS_ARM_CACHE_CP15
240 select SYS_CACHE_SHIFT_6
244 select SYS_CACHE_SHIFT_5
249 select SYS_CACHE_SHIFT_5
253 default "arm720t" if CPU_ARM720T
254 default "arm920t" if CPU_ARM920T
255 default "arm926ejs" if CPU_ARM926EJS
256 default "arm946es" if CPU_ARM946ES
257 default "arm1136" if CPU_ARM1136
258 default "arm1176" if CPU_ARM1176
259 default "armv7" if CPU_V7A
260 default "armv7" if CPU_V7R
261 default "armv7m" if CPU_V7M
262 default "pxa" if CPU_PXA
263 default "sa1100" if CPU_SA1100
264 default "armv8" if ARM64
268 default 4 if CPU_ARM720T
269 default 4 if CPU_ARM920T
270 default 5 if CPU_ARM926EJS
271 default 5 if CPU_ARM946ES
272 default 6 if CPU_ARM1136
273 default 6 if CPU_ARM1176
278 default 4 if CPU_SA1100
281 config SYS_CACHE_SHIFT_5
284 config SYS_CACHE_SHIFT_6
287 config SYS_CACHE_SHIFT_7
290 config SYS_CACHELINE_SIZE
292 default 128 if SYS_CACHE_SHIFT_7
293 default 64 if SYS_CACHE_SHIFT_6
294 default 32 if SYS_CACHE_SHIFT_5
296 config SYS_ARCH_TIMER
297 bool "ARM Generic Timer support"
298 depends on CPU_V7A || ARM64
301 The ARM Generic Timer (aka arch-timer) provides an architected
302 interface to a timer source on an SoC.
303 It is mandantory for ARMv8 implementation and widely available
307 bool "Support for ARM SMC Calling Convention (SMCCC)"
308 depends on CPU_V7A || ARM64
311 Say Y here if you want to enable ARM SMC Calling Convention.
312 This should be enabled if U-Boot needs to communicate with system
313 firmware (for example, PSCI) according to SMCCC.
316 bool "support boot from semihosting"
318 In emulated environments, semihosting is a way for
319 the hosted environment to call out to the emulator to
320 retrieve files from the host machine.
322 config SYS_THUMB_BUILD
323 bool "Build U-Boot using the Thumb instruction set"
326 Use this flag to build U-Boot using the Thumb instruction set for
327 ARM architectures. Thumb instruction set provides better code
328 density. For ARM architectures that support Thumb2 this flag will
329 result in Thumb2 code generated by GCC.
331 config SPL_SYS_THUMB_BUILD
332 bool "Build SPL using the Thumb instruction set"
333 default y if SYS_THUMB_BUILD
336 Use this flag to build SPL using the Thumb instruction set for
337 ARM architectures. Thumb instruction set provides better code
338 density. For ARM architectures that support Thumb2 this flag will
339 result in Thumb2 code generated by GCC.
341 config SYS_L2CACHE_OFF
344 If SoC does not support L2CACHE or one do not want to enable
345 L2CACHE, choose this option.
347 config ENABLE_ARM_SOC_BOOT0_HOOK
348 bool "prepare BOOT0 header"
350 If the SoC's BOOT0 requires a header area filled with (magic)
351 values, then choose this option, and create a file included as
352 <asm/arch/boot0.h> which contains the required assembler code.
354 config ARM_CORTEX_CPU_IS_UP
358 config USE_ARCH_MEMCPY
359 bool "Use an assembly optimized implementation of memcpy"
363 Enable the generation of an optimized version of memcpy.
364 Such implementation may be faster under some conditions
365 but may increase the binary size.
367 config SPL_USE_ARCH_MEMCPY
368 bool "Use an assembly optimized implementation of memcpy for SPL"
369 default y if USE_ARCH_MEMCPY
372 Enable the generation of an optimized version of memcpy.
373 Such implementation may be faster under some conditions
374 but may increase the binary size.
376 config USE_ARCH_MEMSET
377 bool "Use an assembly optimized implementation of memset"
381 Enable the generation of an optimized version of memset.
382 Such implementation may be faster under some conditions
383 but may increase the binary size.
385 config SPL_USE_ARCH_MEMSET
386 bool "Use an assembly optimized implementation of memset for SPL"
387 default y if USE_ARCH_MEMSET
390 Enable the generation of an optimized version of memset.
391 Such implementation may be faster under some conditions
392 but may increase the binary size.
394 config ARM64_SUPPORT_AARCH32
395 bool "ARM64 system support AArch32 execution state"
396 default y if ARM64 && !TARGET_THUNDERX_88XX
398 This ARM64 system supports AArch32 execution state.
401 prompt "Target select"
406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB
408 config TARGET_EDB93XX
409 bool "Support edb93xx"
413 config TARGET_ASPENITE
414 bool "Support aspenite"
418 bool "Support gplugd"
426 Support for TI's DaVinci platform.
429 bool "Marvell Kirkwood"
430 select ARCH_MISC_INIT
431 select BOARD_EARLY_INIT_F
435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
446 config TARGET_DEVKIT3250
447 bool "Support devkit3250"
451 config TARGET_WORK_92105
452 bool "Support work_92105"
465 config TARGET_SPEAR300
466 bool "Support spear300"
467 select BOARD_EARLY_INIT_F
472 config TARGET_SPEAR310
473 bool "Support spear310"
474 select BOARD_EARLY_INIT_F
479 config TARGET_SPEAR320
480 bool "Support spear320"
481 select BOARD_EARLY_INIT_F
486 config TARGET_SPEAR600
487 bool "Support spear600"
488 select BOARD_EARLY_INIT_F
493 config TARGET_STV0991
494 bool "Support stv0991"
507 select BOARD_LATE_INIT
512 config TARGET_WOODBURN
513 bool "Support woodburn"
516 config TARGET_WOODBURN_SD
517 bool "Support woodburn_sd"
525 config TARGET_MX35PDK
526 bool "Support mx35pdk"
527 select BOARD_LATE_INIT
531 bool "Broadcom BCM283X family"
537 select SERIAL_SEARCH_ALL
541 config TARGET_VEXPRESS_CA15_TC2
542 bool "Support vexpress_ca15_tc2"
544 select CPU_V7_HAS_NONSEC
545 select CPU_V7_HAS_VIRT
549 bool "Broadcom BCM7XXX family"
553 select OF_PRIOR_STAGE
556 This enables support for Broadcom ARM-based set-top box
557 chipsets, including the 7445 family of chips.
559 config TARGET_VEXPRESS_CA5X2
560 bool "Support vexpress_ca5x2"
564 config TARGET_VEXPRESS_CA9X4
565 bool "Support vexpress_ca9x4"
569 config TARGET_BCM23550_W1D
570 bool "Support bcm23550_w1d"
575 config TARGET_BCM28155_AP
576 bool "Support bcm28155_ap"
581 config TARGET_BCMCYGNUS
582 bool "Support bcmcygnus"
585 imply BCM_SF2_ETH_GMAC
593 bool "Support bcmnsp"
597 bool "Support Broadcom Northstar2"
600 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
601 ARMv8 Cortex-A57 processors targeting a broad range of networking
605 bool "Samsung EXYNOS"
618 bool "Samsung S5PC1XX"
627 bool "Calxeda Highbank"
631 config ARCH_INTEGRATOR
632 bool "ARM Ltd. Integrator family"
643 select SYS_ARCH_TIMER
644 select SYS_THUMB_BUILD
649 config ARCH_OMAP2PLUS
652 select SPL_BOARD_INIT if SPL
653 select SPL_STACK_R if SPL
659 imply DISTRO_DEFAULTS
661 Support for the Meson SoC family developed by Amlogic Inc.,
662 targeted at media players and tablet computers. We currently
663 support the S905 (GXBaby) 64-bit SoC.
666 bool "NXP i.MX8M platform"
673 bool "NXP i.MX23 family"
684 bool "NXP i.MX28 family"
690 bool "NXP i.MX31 family"
696 select ROM_UNIFIED_SECTIONS
701 select ARCH_MISC_INIT
702 select BOARD_EARLY_INIT_F
704 select SYS_FSL_HAS_SEC if SECURE_BOOT
705 select SYS_FSL_SEC_COMPAT_4
706 select SYS_FSL_SEC_LE
712 select SYS_FSL_HAS_SEC if SECURE_BOOT
713 select SYS_FSL_SEC_COMPAT_4
714 select SYS_FSL_SEC_LE
715 select SYS_THUMB_BUILD if SPL
720 default "arch/arm/mach-omap2/u-boot-spl.lds"
725 select BOARD_EARLY_INIT_F
730 bool "Actions Semi OWL SoCs"
738 bool "QEMU Virtual Platform"
746 bool "Renesas ARM SoCs"
747 select BOARD_EARLY_INIT_F
752 imply SYS_THUMB_BUILD
754 config TARGET_S32V234EVB
755 bool "Support s32v234evb"
757 select SYS_FSL_ERRATUM_ESDHC111
759 config ARCH_SNAPDRAGON
760 bool "Qualcomm Snapdragon SoCs"
773 bool "Altera SOCFPGA family"
774 select ARCH_EARLY_INIT_R
775 select ARCH_MISC_INIT
776 select ARM64 if TARGET_SOCFPGA_STRATIX10
777 select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
780 select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
782 select SPL_DM_RESET if DM_RESET
784 select SPL_LIBCOMMON_SUPPORT
785 select SPL_LIBDISK_SUPPORT
786 select SPL_LIBGENERIC_SUPPORT
787 select SPL_MMC_SUPPORT if DM_MMC
788 select SPL_NAND_SUPPORT if SPL_NAND_DENALI
789 select SPL_OF_CONTROL
790 select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
791 select SPL_SERIAL_SUPPORT
792 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
793 select SPL_SPI_SUPPORT if DM_SPI
794 select SPL_WATCHDOG_SUPPORT
796 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
798 select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
805 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
808 bool "Support sunxi (Allwinner) SoCs"
811 select CMD_MMC if MMC
812 select CMD_USB if DISTRO_DEFAULTS
818 select DM_USB if DISTRO_DEFAULTS
819 select OF_BOARD_SETUP
822 select SPECIFY_CONSOLE_INDEX
823 select SPL_STACK_R if SPL
824 select SPL_SYS_MALLOC_SIMPLE if SPL
825 select SPL_SYS_THUMB_BUILD if !ARM64
827 select SYS_THUMB_BUILD if !ARM64
828 select USB if DISTRO_DEFAULTS
829 select USB_KEYBOARD if DISTRO_DEFAULTS
830 select USB_STORAGE if DISTRO_DEFAULTS
831 select USE_TINY_PRINTF
834 imply DISTRO_DEFAULTS
836 imply OF_LIBFDT_OVERLAY
837 imply PRE_CONSOLE_BUFFER
838 imply SPL_GPIO_SUPPORT
839 imply SPL_LIBCOMMON_SUPPORT
840 imply SPL_LIBDISK_SUPPORT
841 imply SPL_LIBGENERIC_SUPPORT
842 imply SPL_MMC_SUPPORT if MMC
843 imply SPL_POWER_SUPPORT
844 imply SPL_SERIAL_SUPPORT
848 bool "Freescale Vybrid"
850 select SYS_FSL_ERRATUM_ESDHC111
855 bool "Xilinx Zynq based platform"
856 select BOARD_EARLY_INIT_F if WDT
857 select BOARD_LATE_INIT
870 select SPL_BOARD_INIT if SPL
871 select SPL_CLK if SPL
873 select SPL_OF_CONTROL if SPL
874 select SPL_SEPARATE_BSS if SPL
876 imply ARCH_EARLY_INIT_R
882 config ARCH_ZYNQMP_R5
883 bool "Xilinx ZynqMP R5 based platform"
892 bool "Xilinx ZynqMP based platform"
894 select BOARD_LATE_INIT
900 select SPL_BOARD_INIT if SPL
901 select SPL_CLK if SPL
908 imply DISTRO_DEFAULTS
911 config TARGET_VEXPRESS64_AEMV8A
912 bool "Support vexpress_aemv8a"
916 config TARGET_VEXPRESS64_BASE_FVP
917 bool "Support Versatile Express ARMv8a FVP BASE model"
922 config TARGET_VEXPRESS64_BASE_FVP_DRAM
923 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
927 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
928 the default config to allow the user to load the images directly into
929 DRAM using model parameters rather than by using semi-hosting to load
930 the files from the host filesystem.
932 config TARGET_VEXPRESS64_JUNO
933 bool "Support Versatile Express Juno Development Platform"
937 config TARGET_LS2080A_EMU
938 bool "Support ls2080a_emu"
940 select ARCH_MISC_INIT
942 select ARMV8_MULTIENTRY
944 Support for Freescale LS2080A_EMU platform
945 The LS2080A Development System (EMULATOR) is a pre silicon
946 development platform that supports the QorIQ LS2080A
947 Layerscape Architecture processor.
949 config TARGET_LS2080A_SIMU
950 bool "Support ls2080a_simu"
952 select ARCH_MISC_INIT
954 select ARMV8_MULTIENTRY
956 Support for Freescale LS2080A_SIMU platform
957 The LS2080A Development System (QDS) is a pre silicon
958 development platform that supports the QorIQ LS2080A
959 Layerscape Architecture processor.
961 config TARGET_LS1088AQDS
962 bool "Support ls1088aqds"
964 select ARCH_MISC_INIT
966 select ARMV8_MULTIENTRY
967 select BOARD_LATE_INIT
970 Support for NXP LS1088AQDS platform
971 The LS1088A Development System (QDS) is a high-performance
972 development platform that supports the QorIQ LS1088A
973 Layerscape Architecture processor.
975 config TARGET_LS2080AQDS
976 bool "Support ls2080aqds"
978 select ARCH_MISC_INIT
980 select ARMV8_MULTIENTRY
981 select BOARD_LATE_INIT
986 Support for Freescale LS2080AQDS platform
987 The LS2080A Development System (QDS) is a high-performance
988 development platform that supports the QorIQ LS2080A
989 Layerscape Architecture processor.
991 config TARGET_LS2080ARDB
992 bool "Support ls2080ardb"
994 select ARCH_MISC_INIT
996 select ARMV8_MULTIENTRY
997 select BOARD_LATE_INIT
1002 Support for Freescale LS2080ARDB platform.
1003 The LS2080A Reference design board (RDB) is a high-performance
1004 development platform that supports the QorIQ LS2080A
1005 Layerscape Architecture processor.
1007 config TARGET_LS2081ARDB
1008 bool "Support ls2081ardb"
1010 select ARCH_MISC_INIT
1012 select ARMV8_MULTIENTRY
1013 select BOARD_LATE_INIT
1016 Support for Freescale LS2081ARDB platform.
1017 The LS2081A Reference design board (RDB) is a high-performance
1018 development platform that supports the QorIQ LS2081A/LS2041A
1019 Layerscape Architecture processor.
1022 bool "Support HiKey 96boards Consumer Edition Platform"
1029 select SPECIFY_CONSOLE_INDEX
1032 Support for HiKey 96boards platform. It features a HI6220
1033 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
1035 config TARGET_POPLAR
1036 bool "Support Poplar 96boards Enterprise Edition Platform"
1045 Support for Poplar 96boards EE platform. It features a HI3798cv200
1046 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
1047 making it capable of running any commercial set-top solution based on
1050 config TARGET_LS1012AQDS
1051 bool "Support ls1012aqds"
1054 select BOARD_LATE_INIT
1056 Support for Freescale LS1012AQDS platform.
1057 The LS1012A Development System (QDS) is a high-performance
1058 development platform that supports the QorIQ LS1012A
1059 Layerscape Architecture processor.
1061 config TARGET_LS1012ARDB
1062 bool "Support ls1012ardb"
1065 select BOARD_LATE_INIT
1069 Support for Freescale LS1012ARDB platform.
1070 The LS1012A Reference design board (RDB) is a high-performance
1071 development platform that supports the QorIQ LS1012A
1072 Layerscape Architecture processor.
1074 config TARGET_LS1012A2G5RDB
1075 bool "Support ls1012a2g5rdb"
1078 select BOARD_LATE_INIT
1081 Support for Freescale LS1012A2G5RDB platform.
1082 The LS1012A 2G5 Reference design board (RDB) is a high-performance
1083 development platform that supports the QorIQ LS1012A
1084 Layerscape Architecture processor.
1086 config TARGET_LS1012AFRWY
1087 bool "Support ls1012afrwy"
1090 select BOARD_LATE_INIT
1094 Support for Freescale LS1012AFRWY platform.
1095 The LS1012A FRWY board (FRWY) is a high-performance
1096 development platform that supports the QorIQ LS1012A
1097 Layerscape Architecture processor.
1099 config TARGET_LS1012AFRDM
1100 bool "Support ls1012afrdm"
1104 Support for Freescale LS1012AFRDM platform.
1105 The LS1012A Freedom board (FRDM) is a high-performance
1106 development platform that supports the QorIQ LS1012A
1107 Layerscape Architecture processor.
1109 config TARGET_LS1088ARDB
1110 bool "Support ls1088ardb"
1112 select ARCH_MISC_INIT
1114 select ARMV8_MULTIENTRY
1115 select BOARD_LATE_INIT
1118 Support for NXP LS1088ARDB platform.
1119 The LS1088A Reference design board (RDB) is a high-performance
1120 development platform that supports the QorIQ LS1088A
1121 Layerscape Architecture processor.
1123 config TARGET_LS1021AQDS
1124 bool "Support ls1021aqds"
1126 select ARCH_SUPPORT_PSCI
1127 select BOARD_EARLY_INIT_F
1128 select BOARD_LATE_INIT
1130 select CPU_V7_HAS_NONSEC
1131 select CPU_V7_HAS_VIRT
1132 select LS1_DEEP_SLEEP
1137 config TARGET_LS1021ATWR
1138 bool "Support ls1021atwr"
1140 select ARCH_SUPPORT_PSCI
1141 select BOARD_EARLY_INIT_F
1142 select BOARD_LATE_INIT
1144 select CPU_V7_HAS_NONSEC
1145 select CPU_V7_HAS_VIRT
1146 select LS1_DEEP_SLEEP
1150 config TARGET_LS1021AIOT
1151 bool "Support ls1021aiot"
1153 select ARCH_SUPPORT_PSCI
1154 select BOARD_LATE_INIT
1156 select CPU_V7_HAS_NONSEC
1157 select CPU_V7_HAS_VIRT
1161 Support for Freescale LS1021AIOT platform.
1162 The LS1021A Freescale board (IOT) is a high-performance
1163 development platform that supports the QorIQ LS1021A
1164 Layerscape Architecture processor.
1166 config TARGET_LS1043AQDS
1167 bool "Support ls1043aqds"
1170 select ARMV8_MULTIENTRY
1171 select BOARD_EARLY_INIT_F
1172 select BOARD_LATE_INIT
1176 Support for Freescale LS1043AQDS platform.
1178 config TARGET_LS1043ARDB
1179 bool "Support ls1043ardb"
1182 select ARMV8_MULTIENTRY
1183 select BOARD_EARLY_INIT_F
1184 select BOARD_LATE_INIT
1188 Support for Freescale LS1043ARDB platform.
1190 config TARGET_LS1046AQDS
1191 bool "Support ls1046aqds"
1194 select ARMV8_MULTIENTRY
1195 select BOARD_EARLY_INIT_F
1196 select BOARD_LATE_INIT
1197 select DM_SPI_FLASH if DM_SPI
1201 Support for Freescale LS1046AQDS platform.
1202 The LS1046A Development System (QDS) is a high-performance
1203 development platform that supports the QorIQ LS1046A
1204 Layerscape Architecture processor.
1206 config TARGET_LS1046ARDB
1207 bool "Support ls1046ardb"
1210 select ARMV8_MULTIENTRY
1211 select BOARD_EARLY_INIT_F
1212 select BOARD_LATE_INIT
1213 select DM_SPI_FLASH if DM_SPI
1214 select POWER_MC34VR500
1218 Support for Freescale LS1046ARDB platform.
1219 The LS1046A Reference Design Board (RDB) is a high-performance
1220 development platform that supports the QorIQ LS1046A
1221 Layerscape Architecture processor.
1224 bool "Support h2200"
1227 config TARGET_ZIPITZ2
1228 bool "Support zipitz2"
1231 config TARGET_COLIBRI_PXA270
1232 bool "Support colibri_pxa270"
1235 config ARCH_UNIPHIER
1236 bool "Socionext UniPhier SoCs"
1237 select BOARD_LATE_INIT
1245 select OF_BOARD_SETUP
1249 select SPL_BOARD_INIT if SPL
1250 select SPL_DM if SPL
1251 select SPL_LIBCOMMON_SUPPORT if SPL
1252 select SPL_LIBGENERIC_SUPPORT if SPL
1253 select SPL_OF_CONTROL if SPL
1254 select SPL_PINCTRL if SPL
1257 imply DISTRO_DEFAULTS
1260 Support for UniPhier SoC family developed by Socionext Inc.
1261 (formerly, System LSI Business Division of Panasonic Corporation)
1264 bool "Support STMicroelectronics STM32 MCU with cortex M"
1268 select SYS_THUMB_BUILD
1272 bool "Support STMicrolectronics SoCs"
1281 Support for STMicroelectronics STiH407/10 SoC family.
1282 This SoC is used on Linaro 96Board STiH410-B2260
1285 bool "Support STMicroelectronics STM32MP Socs with cortex A"
1286 select ARCH_MISC_INIT
1287 select BOARD_LATE_INIT
1301 select SYS_THUMB_BUILD
1304 Support for STM32MP SoC family developed by STMicroelectronics,
1305 MPUs based on ARM cortex A core
1306 U-BOOT is running in DDR and SPL support is the unsecure First Stage
1309 config ARCH_ROCKCHIP
1310 bool "Support Rockchip SoCs"
1321 select DM_USB if USB
1322 select ENABLE_ARM_SOC_BOOT0_HOOK
1325 select SPL_DM if SPL
1326 select SPL_SYS_MALLOC_SIMPLE if SPL
1328 select SYS_THUMB_BUILD if !ARM64
1331 imply DISTRO_DEFAULTS
1333 imply SARADC_ROCKCHIP
1337 imply USB_FUNCTION_FASTBOOT
1339 config TARGET_THUNDERX_88XX
1340 bool "Support ThunderX 88xx"
1344 select SYS_CACHE_SHIFT_7
1347 bool "Support Aspeed SoCs"
1354 config TI_SECURE_DEVICE
1355 bool "HS Device Type Support"
1356 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
1358 If a high secure (HS) device type is being used, this config
1359 must be set. This option impacts various aspects of the
1360 build system (to create signed boot images that can be
1361 authenticated) and the code. See the doc/README.ti-secure
1362 file for further details.
1364 source "arch/arm/mach-aspeed/Kconfig"
1366 source "arch/arm/mach-at91/Kconfig"
1368 source "arch/arm/mach-bcm283x/Kconfig"
1370 source "arch/arm/mach-bcmstb/Kconfig"
1372 source "arch/arm/mach-davinci/Kconfig"
1374 source "arch/arm/mach-exynos/Kconfig"
1376 source "arch/arm/mach-highbank/Kconfig"
1378 source "arch/arm/mach-integrator/Kconfig"
1380 source "arch/arm/mach-keystone/Kconfig"
1382 source "arch/arm/mach-kirkwood/Kconfig"
1384 source "arch/arm/mach-mvebu/Kconfig"
1386 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1388 source "arch/arm/mach-imx/mx2/Kconfig"
1390 source "arch/arm/mach-imx/mx3/Kconfig"
1392 source "arch/arm/mach-imx/mx5/Kconfig"
1394 source "arch/arm/mach-imx/mx6/Kconfig"
1396 source "arch/arm/mach-imx/mx7/Kconfig"
1398 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1400 source "arch/arm/mach-imx/mx8m/Kconfig"
1402 source "arch/arm/mach-imx/mxs/Kconfig"
1404 source "arch/arm/mach-omap2/Kconfig"
1406 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1408 source "arch/arm/mach-orion5x/Kconfig"
1410 source "arch/arm/mach-owl/Kconfig"
1412 source "arch/arm/mach-rmobile/Kconfig"
1414 source "arch/arm/mach-meson/Kconfig"
1416 source "arch/arm/mach-qemu/Kconfig"
1418 source "arch/arm/mach-rockchip/Kconfig"
1420 source "arch/arm/mach-s5pc1xx/Kconfig"
1422 source "arch/arm/mach-snapdragon/Kconfig"
1424 source "arch/arm/mach-socfpga/Kconfig"
1426 source "arch/arm/mach-sti/Kconfig"
1428 source "arch/arm/mach-stm32/Kconfig"
1430 source "arch/arm/mach-stm32mp/Kconfig"
1432 source "arch/arm/mach-sunxi/Kconfig"
1434 source "arch/arm/mach-tegra/Kconfig"
1436 source "arch/arm/mach-uniphier/Kconfig"
1438 source "arch/arm/cpu/armv7/vf610/Kconfig"
1440 source "arch/arm/mach-zynq/Kconfig"
1442 source "arch/arm/mach-zynqmp-r5/Kconfig"
1444 source "arch/arm/cpu/armv7/Kconfig"
1446 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1448 source "arch/arm/cpu/armv8/Kconfig"
1450 source "arch/arm/mach-imx/Kconfig"
1452 source "board/bosch/shc/Kconfig"
1453 source "board/CarMediaLab/flea3/Kconfig"
1454 source "board/Marvell/aspenite/Kconfig"
1455 source "board/Marvell/gplugd/Kconfig"
1456 source "board/armadeus/apf27/Kconfig"
1457 source "board/armltd/vexpress/Kconfig"
1458 source "board/armltd/vexpress64/Kconfig"
1459 source "board/broadcom/bcm23550_w1d/Kconfig"
1460 source "board/broadcom/bcm28155_ap/Kconfig"
1461 source "board/broadcom/bcmcygnus/Kconfig"
1462 source "board/broadcom/bcmnsp/Kconfig"
1463 source "board/broadcom/bcmns2/Kconfig"
1464 source "board/cavium/thunderx/Kconfig"
1465 source "board/cirrus/edb93xx/Kconfig"
1466 source "board/eets/pdu001/Kconfig"
1467 source "board/freescale/ls2080a/Kconfig"
1468 source "board/freescale/ls2080aqds/Kconfig"
1469 source "board/freescale/ls2080ardb/Kconfig"
1470 source "board/freescale/ls1088a/Kconfig"
1471 source "board/freescale/ls1021aqds/Kconfig"
1472 source "board/freescale/ls1043aqds/Kconfig"
1473 source "board/freescale/ls1021atwr/Kconfig"
1474 source "board/freescale/ls1021aiot/Kconfig"
1475 source "board/freescale/ls1046aqds/Kconfig"
1476 source "board/freescale/ls1043ardb/Kconfig"
1477 source "board/freescale/ls1046ardb/Kconfig"
1478 source "board/freescale/ls1012aqds/Kconfig"
1479 source "board/freescale/ls1012ardb/Kconfig"
1480 source "board/freescale/ls1012afrdm/Kconfig"
1481 source "board/freescale/mx35pdk/Kconfig"
1482 source "board/freescale/s32v234evb/Kconfig"
1483 source "board/grinn/chiliboard/Kconfig"
1484 source "board/gumstix/pepper/Kconfig"
1485 source "board/h2200/Kconfig"
1486 source "board/hisilicon/hikey/Kconfig"
1487 source "board/hisilicon/poplar/Kconfig"
1488 source "board/isee/igep003x/Kconfig"
1489 source "board/phytec/pcm051/Kconfig"
1490 source "board/silica/pengwyn/Kconfig"
1491 source "board/spear/spear300/Kconfig"
1492 source "board/spear/spear310/Kconfig"
1493 source "board/spear/spear320/Kconfig"
1494 source "board/spear/spear600/Kconfig"
1495 source "board/spear/x600/Kconfig"
1496 source "board/st/stv0991/Kconfig"
1497 source "board/tcl/sl50/Kconfig"
1498 source "board/ucRobotics/bubblegum_96/Kconfig"
1499 source "board/birdland/bav335x/Kconfig"
1500 source "board/timll/devkit3250/Kconfig"
1501 source "board/toradex/colibri_pxa270/Kconfig"
1502 source "board/vscom/baltos/Kconfig"
1503 source "board/woodburn/Kconfig"
1504 source "board/work-microwave/work_92105/Kconfig"
1505 source "board/xilinx/Kconfig"
1506 source "board/xilinx/zynq/Kconfig"
1507 source "board/xilinx/zynqmp/Kconfig"
1508 source "board/zipitz2/Kconfig"
1510 source "arch/arm/Kconfig.debug"
1515 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
1516 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1517 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64