1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
23 config SYS_INIT_SP_BSS_OFFSET
26 U-Boot typically uses a hard-coded value for the stack pointer
27 before relocation. Define this option to instead calculate the
28 initial SP at run-time. This is useful to avoid hard-coding addresses
29 into U-Boot, so that can be loaded and executed at arbitrary
30 addresses and thus avoid using arbitrary addresses at runtime. This
31 option's value is the offset added to &_bss_start in order to
32 calculate the stack pointer. This offset should be large enough so
33 that the early malloc region, global data (gd), and early stack usage
34 do not overlap any appended DTB.
36 config LINUX_KERNEL_IMAGE_HEADER
39 Place a Linux kernel image header at the start of the U-Boot binary.
40 The format of the header is described in the Linux kernel source at
41 Documentation/arm64/booting.txt. This feature is useful since the
42 image header reports the amount of memory (BSS and similar) that
43 U-Boot needs to use, but which isn't part of the binary.
45 if LINUX_KERNEL_IMAGE_HEADER
46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50 TEXT_OFFSET value written in to the Linux kernel image header.
56 default y if ARM64 && !POSITION_INDEPENDENT
58 config DMA_ADDR_T_64BIT
68 # Used for compatibility with asm files copied from the kernel
69 config ARM_ASM_UNIFIED
73 # Used for compatibility with asm files copied from the kernel
77 # If set, the workarounds for these ARM errata are applied early during U-Boot
78 # startup. Note that in general these options force the workarounds to be
79 # applied; no CPU-type/version detection exists, unlike the similar options in
80 # the Linux kernel. Do not set these options unless they apply! Also note that
81 # the following can be machine specific errata. These do have ability to
82 # provide rudimentary version and machine specific checks, but expect no
84 # CONFIG_ARM_ERRATA_430973
85 # CONFIG_ARM_ERRATA_454179
86 # CONFIG_ARM_ERRATA_621766
87 # CONFIG_ARM_ERRATA_798870
88 # CONFIG_ARM_ERRATA_801819
89 config ARM_ERRATA_430973
92 config ARM_ERRATA_454179
95 config ARM_ERRATA_621766
98 config ARM_ERRATA_716044
101 config ARM_ERRATA_725233
104 config ARM_ERRATA_742230
107 config ARM_ERRATA_743622
110 config ARM_ERRATA_751472
113 config ARM_ERRATA_761320
116 config ARM_ERRATA_773022
119 config ARM_ERRATA_774769
122 config ARM_ERRATA_794072
125 config ARM_ERRATA_798870
128 config ARM_ERRATA_801819
131 config ARM_ERRATA_826974
134 config ARM_ERRATA_828024
137 config ARM_ERRATA_829520
140 config ARM_ERRATA_833069
143 config ARM_ERRATA_833471
146 config ARM_ERRATA_845369
149 config ARM_ERRATA_852421
152 config ARM_ERRATA_852423
155 config ARM_ERRATA_855873
160 select SYS_CACHE_SHIFT_5
164 select SYS_CACHE_SHIFT_5
168 select SYS_CACHE_SHIFT_5
172 select SYS_CACHE_SHIFT_5
176 select SYS_CACHE_SHIFT_5
181 select SYS_CACHE_SHIFT_5
187 select SYS_CACHE_SHIFT_6
193 select SYS_CACHE_SHIFT_5
197 select SYS_CACHE_SHIFT_5
201 select SYS_CACHE_SHIFT_5
204 default "arm720t" if CPU_ARM720T
205 default "arm920t" if CPU_ARM920T
206 default "arm926ejs" if CPU_ARM926EJS
207 default "arm946es" if CPU_ARM946ES
208 default "arm1136" if CPU_ARM1136
209 default "arm1176" if CPU_ARM1176
210 default "armv7" if CPU_V7
211 default "armv7m" if CPU_V7M
212 default "pxa" if CPU_PXA
213 default "sa1100" if CPU_SA1100
214 default "armv8" if ARM64
218 default 4 if CPU_ARM720T
219 default 4 if CPU_ARM920T
220 default 5 if CPU_ARM926EJS
221 default 5 if CPU_ARM946ES
222 default 6 if CPU_ARM1136
223 default 6 if CPU_ARM1176
227 default 4 if CPU_SA1100
230 config SYS_CACHE_SHIFT_5
233 config SYS_CACHE_SHIFT_6
236 config SYS_CACHE_SHIFT_7
239 config SYS_CACHELINE_SIZE
241 default 128 if SYS_CACHE_SHIFT_7
242 default 64 if SYS_CACHE_SHIFT_6
243 default 32 if SYS_CACHE_SHIFT_5
246 bool "Support for ARM SMC Calling Convention (SMCCC)"
247 depends on CPU_V7 || ARM64
250 Say Y here if you want to enable ARM SMC Calling Convention.
251 This should be enabled if U-Boot needs to communicate with system
252 firmware (for example, PSCI) according to SMCCC.
255 bool "support boot from semihosting"
257 In emulated environments, semihosting is a way for
258 the hosted environment to call out to the emulator to
259 retrieve files from the host machine.
261 config SYS_THUMB_BUILD
262 bool "Build U-Boot using the Thumb instruction set"
265 Use this flag to build U-Boot using the Thumb instruction set for
266 ARM architectures. Thumb instruction set provides better code
267 density. For ARM architectures that support Thumb2 this flag will
268 result in Thumb2 code generated by GCC.
270 config SPL_SYS_THUMB_BUILD
271 bool "Build SPL using the Thumb instruction set"
272 default y if SYS_THUMB_BUILD
275 Use this flag to build SPL using the Thumb instruction set for
276 ARM architectures. Thumb instruction set provides better code
277 density. For ARM architectures that support Thumb2 this flag will
278 result in Thumb2 code generated by GCC.
280 config SYS_L2CACHE_OFF
283 If SoC does not support L2CACHE or one do not want to enable
284 L2CACHE, choose this option.
286 config ENABLE_ARM_SOC_BOOT0_HOOK
287 bool "prepare BOOT0 header"
289 If the SoC's BOOT0 requires a header area filled with (magic)
290 values, then choose this option, and create a define called
291 ARM_SOC_BOOT0_HOOK which contains the required assembler
294 config ARM_CORTEX_CPU_IS_UP
298 config USE_ARCH_MEMCPY
299 bool "Use an assembly optimized implementation of memcpy"
303 Enable the generation of an optimized version of memcpy.
304 Such implementation may be faster under some conditions
305 but may increase the binary size.
307 config SPL_USE_ARCH_MEMCPY
308 bool "Use an assembly optimized implementation of memcpy for SPL"
309 default y if USE_ARCH_MEMCPY
312 Enable the generation of an optimized version of memcpy.
313 Such implementation may be faster under some conditions
314 but may increase the binary size.
316 config USE_ARCH_MEMSET
317 bool "Use an assembly optimized implementation of memset"
321 Enable the generation of an optimized version of memset.
322 Such implementation may be faster under some conditions
323 but may increase the binary size.
325 config SPL_USE_ARCH_MEMSET
326 bool "Use an assembly optimized implementation of memset for SPL"
327 default y if USE_ARCH_MEMSET
330 Enable the generation of an optimized version of memset.
331 Such implementation may be faster under some conditions
332 but may increase the binary size.
334 config ARM64_SUPPORT_AARCH32
335 bool "ARM64 system support AArch32 execution state"
336 default y if ARM64 && !TARGET_THUNDERX_88XX
338 This ARM64 system supports AArch32 execution state.
341 prompt "Target select"
346 select SPL_BOARD_INIT if SPL
348 config TARGET_EDB93XX
349 bool "Support edb93xx"
353 config TARGET_ASPENITE
354 bool "Support aspenite"
358 bool "Support gplugd"
366 Support for TI's DaVinci platform.
369 bool "Marvell Kirkwood"
371 select BOARD_EARLY_INIT_F
372 select ARCH_MISC_INIT
375 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
384 config TARGET_DEVKIT3250
385 bool "Support devkit3250"
389 config TARGET_WORK_92105
390 bool "Support work_92105"
403 config TARGET_SPEAR300
404 bool "Support spear300"
406 select BOARD_EARLY_INIT_F
410 config TARGET_SPEAR310
411 bool "Support spear310"
413 select BOARD_EARLY_INIT_F
417 config TARGET_SPEAR320
418 bool "Support spear320"
420 select BOARD_EARLY_INIT_F
424 config TARGET_SPEAR600
425 bool "Support spear600"
427 select BOARD_EARLY_INIT_F
431 config TARGET_STV0991
432 bool "Support stv0991"
443 select BOARD_LATE_INIT
448 config TARGET_IMX31_PHYCORE
449 bool "Support imx31_phycore_eet"
451 select BOARD_EARLY_INIT_F
453 config TARGET_IMX31_PHYCORE_EET
454 bool "Support imx31_phycore_eet"
455 select BOARD_LATE_INIT
457 select BOARD_EARLY_INIT_F
459 config TARGET_MX31ADS
460 bool "Support mx31ads"
462 select BOARD_EARLY_INIT_F
464 config TARGET_MX31PDK
465 bool "Support mx31pdk"
466 select BOARD_LATE_INIT
469 select BOARD_EARLY_INIT_F
471 config TARGET_WOODBURN
472 bool "Support woodburn"
475 config TARGET_WOODBURN_SD
476 bool "Support woodburn_sd"
484 config TARGET_MX35PDK
485 bool "Support mx35pdk"
486 select BOARD_LATE_INIT
490 bool "Broadcom BCM283X family"
496 select SERIAL_SEARCH_ALL
499 config TARGET_VEXPRESS_CA15_TC2
500 bool "Support vexpress_ca15_tc2"
502 select CPU_V7_HAS_NONSEC
503 select CPU_V7_HAS_VIRT
506 config TARGET_VEXPRESS_CA5X2
507 bool "Support vexpress_ca5x2"
511 config TARGET_VEXPRESS_CA9X4
512 bool "Support vexpress_ca9x4"
516 config TARGET_BCM23550_W1D
517 bool "Support bcm23550_w1d"
522 config TARGET_BCM28155_AP
523 bool "Support bcm28155_ap"
528 config TARGET_BCMCYGNUS
529 bool "Support bcmcygnus"
537 imply BCM_SF2_ETH_GMAC
540 bool "Support bcmnsp"
544 bool "Support Broadcom Northstar2"
547 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
548 ARMv8 Cortex-A57 processors targeting a broad range of networking
552 bool "Samsung EXYNOS"
563 bool "Samsung S5PC1XX"
571 bool "Calxeda Highbank"
575 config ARCH_INTEGRATOR
576 bool "ARM Ltd. Integrator family"
585 select SYS_THUMB_BUILD
591 config ARCH_OMAP2PLUS
594 select SPL_BOARD_INIT if SPL
595 select SPL_STACK_R if SPL
602 Support for the Meson SoC family developed by Amlogic Inc.,
603 targeted at media players and tablet computers. We currently
604 support the S905 (GXBaby) 64-bit SoC.
607 bool "NXP i.MX8M platform"
613 bool "NXP i.MX23 family"
624 bool "NXP i.MX28 family"
632 select ROM_UNIFIED_SECTIONS
638 select SYS_FSL_HAS_SEC if SECURE_BOOT
639 select SYS_FSL_SEC_COMPAT_4
640 select SYS_FSL_SEC_LE
641 select BOARD_EARLY_INIT_F
642 select ARCH_MISC_INIT
648 select SYS_FSL_HAS_SEC if SECURE_BOOT
649 select SYS_FSL_SEC_COMPAT_4
650 select SYS_FSL_SEC_LE
651 select SYS_THUMB_BUILD if SPL
656 default "arch/arm/mach-omap2/u-boot-spl.lds"
662 select BOARD_EARLY_INIT_F
666 bool "QEMU Virtual Platform"
673 bool "Renesas ARM SoCs"
676 select BOARD_EARLY_INIT_F
678 imply SYS_THUMB_BUILD
680 config TARGET_S32V234EVB
681 bool "Support s32v234evb"
683 select SYS_FSL_ERRATUM_ESDHC111
685 config ARCH_SNAPDRAGON
686 bool "Qualcomm Snapdragon SoCs"
696 bool "Altera SOCFPGA family"
700 select SPL_OF_CONTROL
704 select ENABLE_ARM_SOC_BOOT0_HOOK
705 select ARCH_EARLY_INIT_R
706 select ARCH_MISC_INIT
707 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
708 select SYS_THUMB_BUILD
714 bool "Support sunxi (Allwinner) SoCs"
717 select CMD_MMC if MMC
718 select CMD_USB if DISTRO_DEFAULTS
724 select DM_USB if DISTRO_DEFAULTS
725 select OF_BOARD_SETUP
728 select SPL_STACK_R if SPL
729 select SPL_SYS_MALLOC_SIMPLE if SPL
731 select SPL_SYS_THUMB_BUILD if !ARM64
732 select SYS_THUMB_BUILD if !ARM64
733 select USB if DISTRO_DEFAULTS
734 select USB_STORAGE if DISTRO_DEFAULTS
735 select USB_KEYBOARD if DISTRO_DEFAULTS
736 select USE_TINY_PRINTF
739 imply OF_LIBFDT_OVERLAY
740 imply PRE_CONSOLE_BUFFER
741 imply SPL_GPIO_SUPPORT
742 imply SPL_LIBCOMMON_SUPPORT
743 imply SPL_LIBDISK_SUPPORT
744 imply SPL_LIBGENERIC_SUPPORT
745 imply SPL_MMC_SUPPORT if MMC
746 imply SPL_POWER_SUPPORT
747 imply SPL_SERIAL_SUPPORT
751 bool "Freescale Vybrid"
753 select SYS_FSL_ERRATUM_ESDHC111
758 bool "Xilinx Zynq based platform"
759 select BOARD_LATE_INIT
763 select SPL_BOARD_INIT if SPL
764 select SPL_OF_CONTROL if SPL
772 select SPL_SEPARATE_BSS if SPL
775 select SPL_CLK if SPL
782 bool "Xilinx ZynqMP based platform"
784 select BOARD_LATE_INIT
790 select SPL_BOARD_INIT if SPL
791 select SPL_CLK if SPL
799 config TARGET_VEXPRESS64_AEMV8A
800 bool "Support vexpress_aemv8a"
804 config TARGET_VEXPRESS64_BASE_FVP
805 bool "Support Versatile Express ARMv8a FVP BASE model"
810 config TARGET_VEXPRESS64_BASE_FVP_DRAM
811 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
815 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
816 the default config to allow the user to load the images directly into
817 DRAM using model parameters rather than by using semi-hosting to load
818 the files from the host filesystem.
820 config TARGET_VEXPRESS64_JUNO
821 bool "Support Versatile Express Juno Development Platform"
825 config TARGET_LS2080A_EMU
826 bool "Support ls2080a_emu"
829 select ARMV8_MULTIENTRY
830 select ARCH_MISC_INIT
832 Support for Freescale LS2080A_EMU platform
833 The LS2080A Development System (EMULATOR) is a pre silicon
834 development platform that supports the QorIQ LS2080A
835 Layerscape Architecture processor.
837 config TARGET_LS2080A_SIMU
838 bool "Support ls2080a_simu"
841 select ARMV8_MULTIENTRY
842 select ARCH_MISC_INIT
844 Support for Freescale LS2080A_SIMU platform
845 The LS2080A Development System (QDS) is a pre silicon
846 development platform that supports the QorIQ LS2080A
847 Layerscape Architecture processor.
849 config TARGET_LS1088AQDS
850 bool "Support ls1088aqds"
853 select ARMV8_MULTIENTRY
854 select ARCH_MISC_INIT
855 select BOARD_LATE_INIT
858 Support for NXP LS1088AQDS platform
859 The LS1088A Development System (QDS) is a high-performance
860 development platform that supports the QorIQ LS1088A
861 Layerscape Architecture processor.
863 config TARGET_LS2080AQDS
864 bool "Support ls2080aqds"
867 select ARMV8_MULTIENTRY
868 select BOARD_LATE_INIT
870 select ARCH_MISC_INIT
874 Support for Freescale LS2080AQDS platform
875 The LS2080A Development System (QDS) is a high-performance
876 development platform that supports the QorIQ LS2080A
877 Layerscape Architecture processor.
879 config TARGET_LS2080ARDB
880 bool "Support ls2080ardb"
883 select ARMV8_MULTIENTRY
884 select BOARD_LATE_INIT
886 select ARCH_MISC_INIT
890 Support for Freescale LS2080ARDB platform.
891 The LS2080A Reference design board (RDB) is a high-performance
892 development platform that supports the QorIQ LS2080A
893 Layerscape Architecture processor.
895 config TARGET_LS2081ARDB
896 bool "Support ls2081ardb"
899 select ARMV8_MULTIENTRY
900 select BOARD_LATE_INIT
902 select ARCH_MISC_INIT
904 Support for Freescale LS2081ARDB platform.
905 The LS2081A Reference design board (RDB) is a high-performance
906 development platform that supports the QorIQ LS2081A/LS2041A
907 Layerscape Architecture processor.
910 bool "Support HiKey 96boards Consumer Edition Platform"
918 Support for HiKey 96boards platform. It features a HI6220
919 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
922 bool "Support Poplar 96boards Enterprise Edition Platform"
930 Support for Poplar 96boards EE platform. It features a HI3798cv200
931 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
932 making it capable of running any commercial set-top solution based on
935 config TARGET_LS1012AQDS
936 bool "Support ls1012aqds"
939 select BOARD_LATE_INIT
941 Support for Freescale LS1012AQDS platform.
942 The LS1012A Development System (QDS) is a high-performance
943 development platform that supports the QorIQ LS1012A
944 Layerscape Architecture processor.
946 config TARGET_LS1012ARDB
947 bool "Support ls1012ardb"
950 select BOARD_LATE_INIT
954 Support for Freescale LS1012ARDB platform.
955 The LS1012A Reference design board (RDB) is a high-performance
956 development platform that supports the QorIQ LS1012A
957 Layerscape Architecture processor.
959 config TARGET_LS1012A2G5RDB
960 bool "Support ls1012a2g5rdb"
963 select BOARD_LATE_INIT
966 Support for Freescale LS1012A2G5RDB platform.
967 The LS1012A 2G5 Reference design board (RDB) is a high-performance
968 development platform that supports the QorIQ LS1012A
969 Layerscape Architecture processor.
971 config TARGET_LS1012AFRDM
972 bool "Support ls1012afrdm"
976 Support for Freescale LS1012AFRDM platform.
977 The LS1012A Freedom board (FRDM) is a high-performance
978 development platform that supports the QorIQ LS1012A
979 Layerscape Architecture processor.
981 config TARGET_LS1088ARDB
982 bool "Support ls1088ardb"
985 select ARMV8_MULTIENTRY
986 select ARCH_MISC_INIT
987 select BOARD_LATE_INIT
990 Support for NXP LS1088ARDB platform.
991 The LS1088A Reference design board (RDB) is a high-performance
992 development platform that supports the QorIQ LS1088A
993 Layerscape Architecture processor.
995 config TARGET_LS1021AQDS
996 bool "Support ls1021aqds"
997 select BOARD_LATE_INIT
999 select CPU_V7_HAS_NONSEC
1000 select CPU_V7_HAS_VIRT
1003 select ARCH_SUPPORT_PSCI
1004 select LS1_DEEP_SLEEP
1006 select BOARD_EARLY_INIT_F
1009 config TARGET_LS1021ATWR
1010 bool "Support ls1021atwr"
1011 select BOARD_LATE_INIT
1013 select CPU_V7_HAS_NONSEC
1014 select CPU_V7_HAS_VIRT
1017 select ARCH_SUPPORT_PSCI
1018 select LS1_DEEP_SLEEP
1019 select BOARD_EARLY_INIT_F
1022 config TARGET_LS1021AIOT
1023 bool "Support ls1021aiot"
1024 select BOARD_LATE_INIT
1026 select CPU_V7_HAS_NONSEC
1027 select CPU_V7_HAS_VIRT
1030 select ARCH_SUPPORT_PSCI
1033 Support for Freescale LS1021AIOT platform.
1034 The LS1021A Freescale board (IOT) is a high-performance
1035 development platform that supports the QorIQ LS1021A
1036 Layerscape Architecture processor.
1038 config TARGET_LS1043AQDS
1039 bool "Support ls1043aqds"
1042 select ARMV8_MULTIENTRY
1043 select BOARD_LATE_INIT
1045 select BOARD_EARLY_INIT_F
1048 Support for Freescale LS1043AQDS platform.
1050 config TARGET_LS1043ARDB
1051 bool "Support ls1043ardb"
1054 select ARMV8_MULTIENTRY
1055 select BOARD_LATE_INIT
1057 select BOARD_EARLY_INIT_F
1060 Support for Freescale LS1043ARDB platform.
1062 config TARGET_LS1046AQDS
1063 bool "Support ls1046aqds"
1066 select ARMV8_MULTIENTRY
1067 select BOARD_LATE_INIT
1069 select DM_SPI_FLASH if DM_SPI
1070 select BOARD_EARLY_INIT_F
1073 Support for Freescale LS1046AQDS platform.
1074 The LS1046A Development System (QDS) is a high-performance
1075 development platform that supports the QorIQ LS1046A
1076 Layerscape Architecture processor.
1078 config TARGET_LS1046ARDB
1079 bool "Support ls1046ardb"
1082 select ARMV8_MULTIENTRY
1083 select BOARD_LATE_INIT
1085 select DM_SPI_FLASH if DM_SPI
1086 select POWER_MC34VR500
1087 select BOARD_EARLY_INIT_F
1090 Support for Freescale LS1046ARDB platform.
1091 The LS1046A Reference Design Board (RDB) is a high-performance
1092 development platform that supports the QorIQ LS1046A
1093 Layerscape Architecture processor.
1096 bool "Support h2200"
1099 config TARGET_ZIPITZ2
1100 bool "Support zipitz2"
1103 config TARGET_COLIBRI_PXA270
1104 bool "Support colibri_pxa270"
1107 config ARCH_UNIPHIER
1108 bool "Socionext UniPhier SoCs"
1109 select BOARD_LATE_INIT
1120 select SPL_BOARD_INIT if SPL
1121 select SPL_DM if SPL
1122 select SPL_LIBCOMMON_SUPPORT if SPL
1123 select SPL_LIBGENERIC_SUPPORT if SPL
1124 select SPL_OF_CONTROL if SPL
1125 select SPL_PINCTRL if SPL
1129 Support for UniPhier SoC family developed by Socionext Inc.
1130 (formerly, System LSI Business Division of Panasonic Corporation)
1133 bool "Support STM32"
1137 select SYS_THUMB_BUILD
1140 bool "Support STMicrolectronics SoCs"
1148 Support for STMicroelectronics STiH407/10 SoC family.
1149 This SoC is used on Linaro 96Board STiH410-B2260
1151 config ARCH_ROCKCHIP
1152 bool "Support Rockchip SoCs"
1156 select SPL_DM if SPL
1158 select SYS_THUMB_BUILD if !ARM64
1159 select SPL_SYS_MALLOC_SIMPLE if SPL
1166 select DM_USB if USB
1169 select ENABLE_ARM_SOC_BOOT0_HOOK
1173 imply USB_FUNCTION_FASTBOOT
1177 imply SARADC_ROCKCHIP
1179 config TARGET_THUNDERX_88XX
1180 bool "Support ThunderX 88xx"
1183 select SYS_CACHE_SHIFT_7
1187 bool "Support Aspeed SoCs"
1193 source "arch/arm/mach-aspeed/Kconfig"
1195 source "arch/arm/mach-at91/Kconfig"
1197 source "arch/arm/mach-bcm283x/Kconfig"
1199 source "arch/arm/mach-davinci/Kconfig"
1201 source "arch/arm/mach-exynos/Kconfig"
1203 source "arch/arm/mach-highbank/Kconfig"
1205 source "arch/arm/mach-integrator/Kconfig"
1207 source "arch/arm/mach-keystone/Kconfig"
1209 source "arch/arm/mach-kirkwood/Kconfig"
1211 source "arch/arm/mach-mvebu/Kconfig"
1213 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1215 source "arch/arm/mach-imx/mx2/Kconfig"
1217 source "arch/arm/mach-imx/mx5/Kconfig"
1219 source "arch/arm/mach-imx/mx6/Kconfig"
1221 source "arch/arm/mach-imx/mx7/Kconfig"
1223 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1225 source "arch/arm/mach-imx/mx8m/Kconfig"
1227 source "arch/arm/mach-imx/mxs/Kconfig"
1229 source "arch/arm/mach-omap2/Kconfig"
1231 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1233 source "arch/arm/mach-orion5x/Kconfig"
1235 source "arch/arm/mach-rmobile/Kconfig"
1237 source "arch/arm/mach-meson/Kconfig"
1239 source "arch/arm/mach-qemu/Kconfig"
1241 source "arch/arm/mach-rockchip/Kconfig"
1243 source "arch/arm/mach-s5pc1xx/Kconfig"
1245 source "arch/arm/mach-snapdragon/Kconfig"
1247 source "arch/arm/mach-socfpga/Kconfig"
1249 source "arch/arm/mach-sti/Kconfig"
1251 source "arch/arm/mach-stm32/Kconfig"
1253 source "arch/arm/mach-sunxi/Kconfig"
1255 source "arch/arm/mach-tegra/Kconfig"
1257 source "arch/arm/mach-uniphier/Kconfig"
1259 source "arch/arm/cpu/armv7/vf610/Kconfig"
1261 source "arch/arm/mach-zynq/Kconfig"
1263 source "arch/arm/cpu/armv7/Kconfig"
1265 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1267 source "arch/arm/cpu/armv8/Kconfig"
1269 source "arch/arm/mach-imx/Kconfig"
1271 source "board/bosch/shc/Kconfig"
1272 source "board/CarMediaLab/flea3/Kconfig"
1273 source "board/Marvell/aspenite/Kconfig"
1274 source "board/Marvell/gplugd/Kconfig"
1275 source "board/armadeus/apf27/Kconfig"
1276 source "board/armltd/vexpress/Kconfig"
1277 source "board/armltd/vexpress64/Kconfig"
1278 source "board/broadcom/bcm23550_w1d/Kconfig"
1279 source "board/broadcom/bcm28155_ap/Kconfig"
1280 source "board/broadcom/bcmcygnus/Kconfig"
1281 source "board/broadcom/bcmnsp/Kconfig"
1282 source "board/broadcom/bcmns2/Kconfig"
1283 source "board/cavium/thunderx/Kconfig"
1284 source "board/cirrus/edb93xx/Kconfig"
1285 source "board/eets/pdu001/Kconfig"
1286 source "board/freescale/ls2080a/Kconfig"
1287 source "board/freescale/ls2080aqds/Kconfig"
1288 source "board/freescale/ls2080ardb/Kconfig"
1289 source "board/freescale/ls1088a/Kconfig"
1290 source "board/freescale/ls1021aqds/Kconfig"
1291 source "board/freescale/ls1043aqds/Kconfig"
1292 source "board/freescale/ls1021atwr/Kconfig"
1293 source "board/freescale/ls1021aiot/Kconfig"
1294 source "board/freescale/ls1046aqds/Kconfig"
1295 source "board/freescale/ls1043ardb/Kconfig"
1296 source "board/freescale/ls1046ardb/Kconfig"
1297 source "board/freescale/ls1012aqds/Kconfig"
1298 source "board/freescale/ls1012ardb/Kconfig"
1299 source "board/freescale/ls1012afrdm/Kconfig"
1300 source "board/freescale/mx31ads/Kconfig"
1301 source "board/freescale/mx31pdk/Kconfig"
1302 source "board/freescale/mx35pdk/Kconfig"
1303 source "board/freescale/s32v234evb/Kconfig"
1304 source "board/gdsys/a38x/Kconfig"
1305 source "board/grinn/chiliboard/Kconfig"
1306 source "board/gumstix/pepper/Kconfig"
1307 source "board/h2200/Kconfig"
1308 source "board/hisilicon/hikey/Kconfig"
1309 source "board/hisilicon/poplar/Kconfig"
1310 source "board/imx31_phycore/Kconfig"
1311 source "board/isee/igep003x/Kconfig"
1312 source "board/phytec/pcm051/Kconfig"
1313 source "board/silica/pengwyn/Kconfig"
1314 source "board/spear/spear300/Kconfig"
1315 source "board/spear/spear310/Kconfig"
1316 source "board/spear/spear320/Kconfig"
1317 source "board/spear/spear600/Kconfig"
1318 source "board/spear/x600/Kconfig"
1319 source "board/st/stv0991/Kconfig"
1320 source "board/tcl/sl50/Kconfig"
1321 source "board/birdland/bav335x/Kconfig"
1322 source "board/timll/devkit3250/Kconfig"
1323 source "board/toradex/colibri_pxa270/Kconfig"
1324 source "board/vscom/baltos/Kconfig"
1325 source "board/woodburn/Kconfig"
1326 source "board/work-microwave/work_92105/Kconfig"
1327 source "board/zipitz2/Kconfig"
1329 source "arch/arm/Kconfig.debug"
1334 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
1335 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1336 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64