2 LuCI - Lua Configuration Interface
4 Copyright 2010 Jo-Philipp Wich <xm@subsignal.org>
6 Licensed under the Apache License, Version 2.0 (the "License");
7 you may not use this file except in compliance with the License.
8 You may obtain a copy of the License at
10 http://www.apache.org/licenses/LICENSE-2.0
16 local util = require "luci.util"
17 local ip = require "luci.ip"
19 function write_float(self, section, value)
20 local n = tonumber(value)
22 return Value.write(self, section, "%.1f" % n)
26 m = Map("olsrd", translate("OLSR Daemon - Interface"),
27 translate("The OLSR daemon is an implementation of the Optimized Link State Routing protocol. "..
28 "As such it allows mesh routing for any network equipment. "..
29 "It runs on any wifi card that supports ad-hoc mode and of course on any ethernet device. "..
30 "Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and documentation."))
32 m.redirect = luci.dispatcher.build_url("admin/services/olsrd")
34 if not arg[1] or m.uci:get("olsrd", arg[1]) ~= "Interface" then
35 luci.http.redirect(m.redirect)
39 i = m:section(NamedSection, arg[1], "Interface", translate("Interface"))
43 i:tab("general", translate("General Settings"))
44 i:tab("addrs", translate("IP Addresses"))
45 i:tab("timing", translate("Timing and Validity"))
47 ign = i:taboption("general", Flag, "ignore", translate("Enable"),
48 translate("Enable this interface."))
52 function ign.cfgvalue(self, section)
53 return Flag.cfgvalue(self, section) or "0"
56 network = i:taboption("general", Value, "interface", translate("Network"),
57 translate("The interface OLSRd should serve."))
59 network.template = "cbi/network_netlist"
60 network.widget = "radio"
61 network.nocreate = true
63 mode = i:taboption("general", ListValue, "Mode", translate("Mode"),
64 translate("Interface Mode is used to prevent unnecessary packet forwarding on switched ethernet interfaces. "..
65 "valid Modes are \"mesh\" and \"ether\". Default is \"mesh\"."))
72 weight = i:taboption("general", Value, "Weight", translate("Weight"),
73 translate("When multiple links exist between hosts the weight of interface is used to determine the link to use. "..
74 "Normally the weight is automatically calculated by olsrd based on the characteristics of the interface, "..
75 "but here you can specify a fixed value. Olsrd will choose links with the lowest value.<br />"..
76 "<b>Note:</b> Interface weight is used only when LinkQualityLevel is set to 0. "..
77 "For any other value of LinkQualityLevel, the interface ETX value is used instead."))
78 weight.optional = true
79 weight.datatype = "uinteger"
80 weight.placeholder = "0"
82 lqmult = i:taboption("general", DynamicList, "LinkQualityMult", translate("LinkQuality Multiplicator"),
83 translate("Multiply routes with the factor given here. Allowed values are between 0.01 and 1.0. "..
84 "It is only used when LQ-Level is greater than 0. Examples:<br />"..
85 "reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />"..
86 "reduce LQ to all nodes on this interface by 20%: default 0.8"))
87 lqmult.optional = true
90 lqmult.placeholder = "default 1.0"
92 function lqmult.validate(self, value)
93 for _, v in pairs(value) do
95 local val = util.split(v, " ")
98 if not host or not mult then
99 return nil, translate("LQMult requires two values (IP address or 'default' and multiplicator) seperated by space.")
101 if not (host == "default" or ip.IPv4(host) or ip.IPv6(host)) then
102 return nil, translate("Can only be a valid IPv4 or IPv6 address or 'default'")
104 if not tonumber(mult) or tonumber(mult) > 1 or tonumber(mult) < 0.01 then
105 return nil, translate("Invalid Value for LQMult-Value. Must be between 0.01 and 1.0.")
107 if not mult:match("[0-1]%.[0-9]+") then
108 return nil, translate("Invalid Value for LQMult-Value. You must use a decimal number between 0.01 and 1.0 here.")
115 ip4b = i:taboption("addrs", Value, "Ip4Broadcast", translate("IPv4 broadcast"),
116 translate("IPv4 broadcast address for outgoing OLSR packets. One useful example would be 255.255.255.255. "..
117 "Default is \"0.0.0.0\", which triggers the usage of the interface broadcast IP."))
119 ip4b.datatype = "ip4addr"
120 ip4b.placeholder = "0.0.0.0"
122 ip6m = i:taboption("addrs", Value, "IPv6Multicast", translate("IPv6 multicast"),
123 translate("IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal multicast."))
125 ip6m.datatype = "ip6addr"
126 ip6m.placeholder = "FF02::6D"
128 ip4s = i:taboption("addrs", Value, "IPv4Src", translate("IPv4 source"),
129 translate("IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which triggers usage of the interface IP."))
131 ip4s.datatype = "ip4addr"
132 ip4s.placeholder = "0.0.0.0"
134 ip6s = i:taboption("addrs", Value, "IPv6Src", translate("IPv6 source"),
135 translate("IPv6 src prefix. OLSRd will choose one of the interface IPs which matches the prefix of this parameter. "..
136 "Default is \"0::/0\", which triggers the usage of a not-linklocal interface IP."))
138 ip6s.datatype = "ip6addr"
139 ip6s.placeholder = "0::/0"
141 hi = i:taboption("timing", Value, "HelloInterval", translate("Hello interval"))
143 hi.datatype = "ufloat"
144 hi.placeholder = "5.0"
145 hi.write = write_float
147 hv = i:taboption("timing", Value, "HelloValidityTime", translate("Hello validity time"))
149 hv.datatype = "ufloat"
150 hv.placeholder = "40.0"
151 hv.write = write_float
153 ti = i:taboption("timing", Value, "TcInterval", translate("TC interval"))
155 ti.datatype = "ufloat"
156 ti.placeholder = "2.0"
157 ti.write = write_float
159 tv = i:taboption("timing", Value, "TcValidityTime", translate("TC validity time"))
161 tv.datatype = "ufloat"
162 tv.placeholder = "256.0"
163 tv.write = write_float
165 mi = i:taboption("timing", Value, "MidInterval", translate("MID interval"))
167 mi.datatype = "ufloat"
168 mi.placeholder = "18.0"
169 mi.write = write_float
171 mv = i:taboption("timing", Value, "MidValidityTime", translate("MID validity time"))
173 mv.datatype = "ufloat"
174 mv.placeholder = "324.0"
175 mv.write = write_float
177 ai = i:taboption("timing", Value, "HnaInterval", translate("HNA interval"))
179 ai.datatype = "ufloat"
180 ai.placeholder = "18.0"
181 ai.write = write_float
183 av = i:taboption("timing", Value, "HnaValidityTime", translate("HNA validity time"))
185 av.datatype = "ufloat"
186 av.placeholder = "108.0"
187 av.write = write_float