8 # To see a list of typical targets execute "make help"
9 # More info can be located in ./README
10 # Comments in this file are targeted only to the developer, do not
11 # expect to learn how to build the kernel reading this file.
13 # Do not print "Entering directory ..."
14 MAKEFLAGS += --no-print-directory
16 # We are using a recursive build, so we need to do a little thinking
17 # to get the ordering right.
19 # Most importantly: sub-Makefiles should only ever modify files in
20 # their own directory. If in some directory we have a dependency on
21 # a file in another dir (which doesn't happen often, but it's often
22 # unavoidable when linking the built-in.o targets which finally
23 # turn into busybox), we will call a sub make in that other dir, and
24 # after that we are sure that everything which is in that other dir
27 # The only cases where we need to modify files which have global
28 # effects are thus separated out and done before the recursive
29 # descending is started. They are now explicitly listed as the
32 # To put more focus on warnings, be less verbose as default
33 # Use 'make V=1' to see the full commands
36 ifeq ("$(origin V)", "command line")
44 # Call sparse as part of compilation of C files
45 # Use 'make C=1' to enable sparse checking
48 ifeq ("$(origin C)", "command line")
49 KBUILD_CHECKSRC = $(C)
52 ifndef KBUILD_CHECKSRC
56 # Use make M=dir to specify directory of external module to build
57 # Old syntax make ... SUBDIRS=$PWD is still supported
58 # Setting the environment variable KBUILD_EXTMOD take precedence
60 KBUILD_EXTMOD ?= $(SUBDIRS)
63 ifeq ("$(origin M)", "command line")
69 # kbuild supports saving output files in a separate directory.
70 # To locate output files in a separate directory two syntaxes are supported.
71 # In both cases the working directory must be the root of the kernel src.
73 # Use "make O=dir/to/store/output/files/"
75 # 2) Set KBUILD_OUTPUT
76 # Set the environment variable KBUILD_OUTPUT to point to the directory
77 # where the output files shall be placed.
78 # export KBUILD_OUTPUT=dir/to/store/output/files/
81 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
85 # KBUILD_SRC is set on invocation of make in OBJ directory
86 # KBUILD_SRC is not intended to be used by the regular user (for now)
89 # OK, Make called in directory where kernel src resides
90 # Do we want to locate output files in a separate directory?
92 ifeq ("$(origin O)", "command line")
97 # That's our default target when none is given on the command line
101 ifneq ($(KBUILD_OUTPUT),)
102 # Invoke a second make in the output directory, passing relevant variables
103 # check that the output directory actually exists
104 saved-output := $(KBUILD_OUTPUT)
105 KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
106 $(if $(KBUILD_OUTPUT),, \
107 $(error output directory "$(saved-output)" does not exist))
109 PHONY += $(MAKECMDGOALS)
111 $(filter-out _all,$(MAKECMDGOALS)) _all:
112 $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
113 KBUILD_SRC=$(CURDIR) \
114 KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
116 # Leave processing to above invocation of make
118 endif # ifneq ($(KBUILD_OUTPUT),)
119 endif # ifeq ($(KBUILD_SRC),)
121 # We process the rest of the Makefile if this is the final invocation of make
122 ifeq ($(skip-makefile),)
124 # If building an external module we do not care about the all: rule
125 # but instead _all depend on modules
127 ifeq ($(KBUILD_EXTMOD),)
133 srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
135 # FIXME - TOPDIR is obsolete, use srctree/objtree
140 VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
142 export srctree objtree VPATH TOPDIR
145 # Cross compiling and selecting different set of gcc/bin-utils
146 # ---------------------------------------------------------------------------
148 # When performing cross compilation for other architectures ARCH shall be set
149 # to the target architecture. (See arch/* for the possibilities).
150 # ARCH can be set during invocation of make:
152 # Another way is to have ARCH set in the environment.
153 # The default ARCH is the host where make is executed.
155 # CROSS_COMPILE specify the prefix used for all executables used
156 # during compilation. Only gcc and related bin-utils executables
157 # are prefixed with $(CROSS_COMPILE).
158 # CROSS_COMPILE can be set on the command line
159 # make CROSS_COMPILE=ia64-linux-
160 # Alternatively CROSS_COMPILE can be set in the environment.
161 # Default value for CROSS_COMPILE is not to prefix executables
162 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
165 # bbox: we may have CONFIG_CROSS_COMPILER_PREFIX in .config,
166 # and it has not been included yet... thus using an awkward syntax.
167 ifeq ($(CROSS_COMPILE),)
168 CROSS_COMPILE := $(shell grep ^CONFIG_CROSS_COMPILER_PREFIX .config 2>/dev/null)
169 CROSS_COMPILE := $(subst CONFIG_CROSS_COMPILER_PREFIX=,,$(CROSS_COMPILE))
170 CROSS_COMPILE := $(subst ",,$(CROSS_COMPILE))
174 # SUBARCH tells the usermode build what the underlying arch is. That is set
175 # first, and if a usermode build is happening, the "ARCH=um" on the command
176 # line overrides the setting of ARCH below. If a native build is happening,
177 # then ARCH is assigned, getting whatever value it gets normally, and
178 # SUBARCH is subsequently ignored.
180 ifneq ($(CROSS_COMPILE),)
181 SUBARCH := $(shell echo $(CROSS_COMPILE) | cut -d- -f1)
183 SUBARCH := $(shell uname -m)
185 SUBARCH := $(shell echo $(SUBARCH) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
186 -e s/arm.*/arm/ -e s/sa110/arm/ \
187 -e s/s390x/s390/ -e s/parisc64/parisc/ \
188 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
192 # Architecture as present in compile.h
193 UTS_MACHINE := $(ARCH)
195 # SHELL used by kbuild
196 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
197 else if [ -x /bin/bash ]; then echo /bin/bash; \
198 else echo sh; fi ; fi)
200 # Decide whether to build built-in, modular, or both.
201 # Normally, just do built-in.
206 # If we have only "make modules", don't compile built-in objects.
207 # When we're building modules with modversions, we need to consider
208 # the built-in objects during the descend as well, in order to
209 # make sure the checksums are uptodate before we record them.
211 ifeq ($(MAKECMDGOALS),modules)
212 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
215 # If we have "make <whatever> modules", compile modules
216 # in addition to whatever we do anyway.
217 # Just "make" or "make all" shall build modules as well
219 ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
223 ifeq ($(MAKECMDGOALS),)
227 export KBUILD_MODULES KBUILD_BUILTIN
228 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
231 # ---------------------------------------------------------------------------
233 # Normally, we echo the whole command before executing it. By making
234 # that echo $($(quiet)$(cmd)), we now have the possibility to set
235 # $(quiet) to choose other forms of output instead, e.g.
237 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
238 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
240 # If $(quiet) is empty, the whole command will be printed.
241 # If it is set to "quiet_", only the short version will be printed.
242 # If it is set to "silent_", nothing wil be printed at all, since
243 # the variable $(silent_cmd_cc_o_c) doesn't exist.
245 # A simple variant is to prefix commands with $(Q) - that's useful
246 # for commands that shall be hidden in non-verbose mode.
250 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
251 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
253 ifeq ($(KBUILD_VERBOSE),1)
261 # If the user is running make -s (silent mode), suppress echoing of
264 ifneq ($(findstring s,$(MAKEFLAGS)),)
268 export quiet Q KBUILD_VERBOSE
271 # Look for make include files relative to root of kernel src
272 MAKEFLAGS += --include-dir=$(srctree)
278 # We need some generic definitions
279 include $(srctree)/scripts/Kbuild.include
281 HOSTCFLAGS += $(call hostcc-option,-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer,)
284 # For maximum performance (+ possibly random breakage, uncomment
289 # Make variables (CC, etc...)
291 AS = $(CROSS_COMPILE)as
292 CC = $(CROSS_COMPILE)gcc
295 AR = $(CROSS_COMPILE)ar
296 NM = $(CROSS_COMPILE)nm
297 STRIP = $(CROSS_COMPILE)strip
298 OBJCOPY = $(CROSS_COMPILE)objcopy
299 OBJDUMP = $(CROSS_COMPILE)objdump
300 PKG_CONFIG ?= $(CROSS_COMPILE)pkg-config
302 GENKSYMS = scripts/genksyms/genksyms
303 DEPMOD = /sbin/depmod
304 KALLSYMS = scripts/kallsyms
308 CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF)
310 CFLAGS_MODULE = $(MODFLAGS)
311 AFLAGS_MODULE = $(MODFLAGS)
317 # Use LINUXINCLUDE when you must reference the include/ directory.
318 # Needed to be compatible with the O= option
320 # Added only to final link stage of busybox binary
321 CFLAGS_busybox := $(CFLAGS_busybox)
322 CPPFLAGS := $(CPPFLAGS)
324 LDFLAGS := $(LDFLAGS)
327 # Read KERNELRELEASE from .kernelrelease (if it exists)
328 KERNELRELEASE = $(shell cat .kernelrelease 2> /dev/null)
329 KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
331 export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION \
332 ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
333 CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
334 HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
336 export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
337 export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
338 export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
341 # When compiling out-of-tree modules, put MODVERDIR in the module
342 # tree rather than in the kernel tree. The kernel tree might
344 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
346 # Files to ignore in find ... statements
348 RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
349 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
351 # ===========================================================================
352 # Rules shared between *config targets and build targets
354 # Basic helpers built in scripts/
355 PHONY += scripts_basic
357 $(Q)$(MAKE) $(build)=scripts/basic
359 # To avoid any implicit rule to kick in, define an empty command.
360 scripts/basic/%: scripts_basic ;
362 # This target generates Kbuild's and Config.in's from *.c files
363 PHONY += gen_build_files
364 gen_build_files: $(wildcard $(srctree)/*/*.c) $(wildcard $(srctree)/*/*/*.c)
365 $(Q)$(srctree)/scripts/gen_build_files.sh $(srctree) $(objtree)
367 # bbox: we have helpers in applets/
368 # we depend on scripts_basic, since scripts/basic/fixdep
369 # must be built before any other host prog
371 applets_dir: scripts_basic gen_build_files
372 $(Q)$(MAKE) $(build)=applets
374 applets/%: applets_dir ;
376 PHONY += outputmakefile
377 # outputmakefile generates a Makefile in the output directory, if using a
378 # separate output directory. This allows convenient use of make in the
381 ifneq ($(KBUILD_SRC),)
382 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
383 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
386 # To make sure we do not include .config for any of the *config targets
387 # catch them early, and hand them over to scripts/kconfig/Makefile
388 # It is allowed to specify more targets when calling make, including
389 # mixing *config targets and build targets.
390 # For example 'make oldconfig all'.
391 # Detect when mixed targets is specified, and make a second invocation
392 # of make so .config is not included in this case either (for *config).
394 no-dot-config-targets := clean mrproper distclean \
395 cscope TAGS tags help %docs
396 #bbox# check% is removed from above
402 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
403 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
408 ifeq ($(KBUILD_EXTMOD),)
409 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
411 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
417 ifeq ($(mixed-targets),1)
418 # ===========================================================================
419 # We're called with mixed targets (*config and build targets).
420 # Handle them one by one.
423 $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
426 ifeq ($(config-targets),1)
427 # ===========================================================================
428 # *config targets only - make sure prerequisites are updated, and descend
429 # in scripts/kconfig to make the *config target
431 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
432 # KBUILD_DEFCONFIG may point out an alternative default configuration
433 # used for 'make defconfig'
434 -include $(srctree)/arch/$(ARCH)/Makefile
435 export KBUILD_DEFCONFIG
437 config: scripts_basic outputmakefile gen_build_files FORCE
439 $(Q)$(MAKE) $(build)=scripts/kconfig $@
440 $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
442 %config: scripts_basic outputmakefile gen_build_files FORCE
444 $(Q)$(MAKE) $(build)=scripts/kconfig $@
445 $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
448 # ===========================================================================
449 # Build targets only - this includes busybox, arch specific targets, clean
450 # targets and others. In general all targets except *config targets.
452 ifeq ($(KBUILD_EXTMOD),)
453 # Additional helpers built in scripts/
454 # Carefully list dependencies so we do not try to build scripts twice
457 scripts: gen_build_files scripts_basic include/config/MARKER
458 $(Q)$(MAKE) $(build)=$(@)
460 scripts_basic: include/autoconf.h
462 # Objects we will link into busybox / subdirs we need to visit
468 archival/libarchive/ \
471 coreutils/libcoreutils/ \
484 networking/libiproute/ \
493 util-linux/volume_id/ \
495 endif # KBUILD_EXTMOD
497 ifeq ($(dot-config),1)
498 # In this section, we need .config
500 # Read in dependencies to all Kconfig* files, make sure to run
501 # oldconfig if changes are detected.
506 # If .config needs to be updated, it will be done via the dependency
507 # that autoconf has on .config.
508 # To avoid any implicit rule to kick in, define an empty command
509 .config .kconfig.d: ;
511 # Now we can define CFLAGS etc according to .config
512 include $(srctree)/Makefile.flags
514 # If .config is newer than include/autoconf.h, someone tinkered
515 # with it and forgot to run make oldconfig.
516 # If kconfig.d is missing then we are probarly in a cleaned tree so
517 # we execute the config step to be sure to catch updated Kconfig files
518 include/autoconf.h: .kconfig.d .config $(wildcard $(srctree)/*/*.c) $(wildcard $(srctree)/*/*/*.c) | gen_build_files
519 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
521 include/usage.h: gen_build_files
524 # Dummy target needed, because used as prerequisite
525 include/autoconf.h: ;
528 # The all: target is the default when no target is given on the
530 # This allow a user to issue only 'make' to build a kernel including modules
531 # Defaults busybox but it is usually overridden in the arch makefile
534 -include $(srctree)/arch/$(ARCH)/Makefile
536 # arch Makefile may override CC so keep this after arch Makefile is included
537 #bbox# NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
538 CHECKFLAGS += $(NOSTDINC_FLAGS)
540 # Default kernel image to build when no specific target is given.
541 # KBUILD_IMAGE may be overruled on the commandline or
542 # set in the environment
543 # Also any assignments in arch/$(ARCH)/Makefile take precedence over
545 export KBUILD_IMAGE ?= busybox
548 # INSTALL_PATH specifies where to place the updated kernel and system map
549 # images. Default is /boot, but you can set it to other values
550 export INSTALL_PATH ?= /boot
553 # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
554 # relocations required by build roots. This is not defined in the
555 # makefile but the argument can be passed to make if needed.
558 MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
562 ifeq ($(KBUILD_EXTMOD),)
563 busybox-dirs := $(patsubst %/,%,$(filter %/, $(core-y) $(core-m) $(libs-y) $(libs-m)))
565 busybox-alldirs := $(sort $(busybox-dirs) $(patsubst %/,%,$(filter %/, \
566 $(core-n) $(core-) $(libs-n) $(libs-) \
569 core-y := $(patsubst %/, %/built-in.o, $(core-y))
570 libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
571 libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
572 libs-y := $(libs-y1) $(libs-y2)
575 # ---------------------------------------------------------------------------
576 # busybox is build from the objects selected by $(busybox-init) and
577 # $(busybox-main). Most are built-in.o files from top-level directories
578 # in the kernel tree, others are specified in arch/$(ARCH)Makefile.
579 # Ordering when linking is important, and $(busybox-init) must be first.
584 # +-< $(busybox-init)
585 # | +--< init/version.o + more
587 # +--< $(busybox-main)
588 # | +--< driver/built-in.o mm/built-in.o + more
590 # +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
592 # busybox version (uname -v) cannot be updated during normal
593 # descending-into-subdirs phase since we do not yet know if we need to
595 # Therefore this step is delayed until just before final link of busybox -
596 # except in the kallsyms case where it is done just before adding the
597 # symbols to the kernel.
599 # System.map is generated to document addresses of all kernel symbols
601 busybox-all := $(core-y) $(libs-y)
603 # Rule to link busybox - also used during CONFIG_KALLSYMS
604 # May be overridden by arch/$(ARCH)/Makefile
605 quiet_cmd_busybox__ ?= LINK $@
606 cmd_busybox__ ?= $(srctree)/scripts/trylink \
609 "$(CFLAGS) $(CFLAGS_busybox)" \
610 "$(LDFLAGS) $(EXTRA_LDFLAGS)" \
614 && $(srctree)/scripts/generate_BUFSIZ.sh --post include/common_bufsiz.h
616 # Generate System.map
617 quiet_cmd_sysmap = SYSMAP
618 cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
621 # If CONFIG_KALLSYMS is set .version is already updated
622 # Generate System.map and verify that the content is consistent
623 # Use + in front of the busybox_version rule to silent warning with make -j2
624 # First command is ':' to allow us to use + in front of the rule
625 define rule_busybox__
627 $(call cmd,busybox__)
628 $(Q)echo 'cmd_$@ := $(cmd_busybox__)' > $(@D)/.$(@F).cmd
632 ifdef CONFIG_KALLSYMS
633 # Generate section listing all symbols and add it into busybox $(kallsyms.o)
634 # It's a three stage process:
635 # o .tmp_busybox1 has all symbols and sections, but __kallsyms is
637 # Running kallsyms on that gives us .tmp_kallsyms1.o with
638 # the right size - busybox version (uname -v) is updated during this step
639 # o .tmp_busybox2 now has a __kallsyms section of the right size,
640 # but due to the added section, some addresses have shifted.
641 # From here, we generate a correct .tmp_kallsyms2.o
642 # o The correct .tmp_kallsyms2.o is linked into the final busybox.
643 # o Verify that the System.map from busybox matches the map from
644 # .tmp_busybox2, just in case we did not generate kallsyms correctly.
645 # o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
646 # .tmp_busybox3 and .tmp_kallsyms3.o. This is only meant as a
647 # temporary bypass to allow the kernel to be built while the
648 # maintainers work out what went wrong with kallsyms.
650 ifdef CONFIG_KALLSYMS_EXTRA_PASS
656 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
658 define verify_kallsyms
659 $(Q)$(if $($(quiet)cmd_sysmap), \
660 echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
661 $(cmd_sysmap) .tmp_busybox$(last_kallsyms) .tmp_System.map
662 $(Q)cmp -s System.map .tmp_System.map || \
663 (echo Inconsistent kallsyms data; \
664 echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
665 rm .tmp_kallsyms* ; /bin/false )
668 # Update busybox version before link
669 # Use + in front of this rule to silent warning about make -j1
670 # First command is ':' to allow us to use + in front of this rule
671 cmd_ksym_ld = $(cmd_busybox__)
674 +$(call cmd,busybox_version)
675 $(call cmd,busybox__)
676 $(Q)echo 'cmd_$@ := $(cmd_busybox__)' > $(@D)/.$(@F).cmd
679 # Generate .S file with all kernel symbols
680 quiet_cmd_kallsyms = KSYM $@
681 cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
682 $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
684 .tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
685 $(call if_changed_dep,as_o_S)
687 .tmp_kallsyms%.S: .tmp_busybox% $(KALLSYMS)
690 # .tmp_busybox1 must be complete except kallsyms, so update busybox version
691 .tmp_busybox1: $(busybox-lds) $(busybox-all) FORCE
692 $(call if_changed_rule,ksym_ld)
694 .tmp_busybox2: $(busybox-lds) $(busybox-all) .tmp_kallsyms1.o FORCE
695 $(call if_changed,busybox__)
697 .tmp_busybox3: $(busybox-lds) $(busybox-all) .tmp_kallsyms2.o FORCE
698 $(call if_changed,busybox__)
700 # Needs to visit scripts/ before $(KALLSYMS) can be used.
701 $(KALLSYMS): scripts ;
703 # Generate some data for debugging strange kallsyms problems
704 debug_kallsyms: .tmp_map$(last_kallsyms)
706 .tmp_map%: .tmp_busybox% FORCE
707 ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
713 endif # ifdef CONFIG_KALLSYMS
715 # busybox image - including updated kernel symbols
716 busybox_unstripped: $(busybox-all) FORCE
717 $(call if_changed_rule,busybox__)
718 $(Q)rm -f .old_version
720 busybox: busybox_unstripped
721 ifeq ($(SKIP_STRIP),y)
724 $(Q)$(STRIP) -s --remove-section=.note --remove-section=.comment \
725 busybox_unstripped -o $@
726 # strip is confused by PIE executable and does not set exec bits
730 # The actual objects are generated when descending,
731 # make sure no implicit rule kicks in
732 $(sort $(busybox-all)): $(busybox-dirs) ;
734 # Handle descending into subdirectories listed in $(busybox-dirs)
735 # Preset locale variables to speed up the build process. Limit locale
736 # tweaks to this spot to avoid wrong language settings when running
737 # make menuconfig etc.
738 # Error messages still appears in the original language
740 PHONY += $(busybox-dirs)
741 $(busybox-dirs): prepare scripts
742 $(Q)$(MAKE) $(build)=$@
744 # Build the kernel release string
745 # The KERNELRELEASE is stored in a file named .kernelrelease
746 # to be used when executing for example make install or make modules_install
748 # Take the contents of any files called localversion* and the config
749 # variable CONFIG_LOCALVERSION and append them to KERNELRELEASE.
750 # LOCALVERSION from the command line override all of this
753 space := $(nullstring) # end of line
755 ___localver = $(objtree)/localversion* $(srctree)/localversion*
756 __localver = $(sort $(wildcard $(___localver)))
757 # skip backup files (containing '~')
758 _localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f)))
760 localver = $(subst $(space),, \
761 $(shell cat /dev/null $(_localver)) \
762 $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
764 # If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
765 # and if the SCM is know a tag from the SCM is appended.
766 # The appended tag is determinded by the SCM used.
768 # Currently, only git is supported.
769 # Other SCMs can edit scripts/setlocalversion and add the appropriate
771 ifdef _BB_DISABLED_CONFIG_LOCALVERSION_AUTO
772 _localver-auto = $(shell $(CONFIG_SHELL) \
773 $(srctree)/scripts/setlocalversion $(srctree))
774 localver-auto = $(LOCALVERSION)$(_localver-auto)
777 localver-full = $(localver)$(localver-auto)
779 # Store (new) KERNELRELASE string in .kernelrelease
780 kernelrelease = $(KERNELVERSION)$(localver-full)
781 .kernelrelease: FORCE
783 $(Q)echo $(kernelrelease) > $@
786 # Things we need to do before we recursively start building the kernel
787 # or the modules are listed in "prepare".
788 # A multi level approach is used. prepareN is processed before prepareN-1.
789 # archprepare is used in arch Makefiles and when processed asm symlink,
790 # version.h and scripts_basic is processed / created.
792 # Listed in dependency order
793 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
795 # prepare-all is deprecated, use prepare as valid replacement
798 # prepare3 is used to check if we are building in a separate output directory,
800 # 1) Check that make has not been executed in the kernel src $(srctree)
801 # 2) Create the include2 directory, used for the second asm symlink
802 prepare3: .kernelrelease
803 ifneq ($(KBUILD_SRC),)
804 @echo ' Using $(srctree) as source for busybox'
805 $(Q)if [ -f $(srctree)/.config ]; then \
806 echo " $(srctree) is not clean, please run 'make mrproper'";\
807 echo " in the '$(srctree)' directory.";\
810 $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
811 $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
814 # prepare2 creates a makefile if using a separate output directory
815 prepare2: prepare3 outputmakefile
817 prepare1: prepare2 include/config/MARKER
818 ifneq ($(KBUILD_MODULES),)
819 $(Q)mkdir -p $(MODVERDIR)
820 $(Q)rm -f $(MODVERDIR)/*
823 archprepare: prepare1 scripts_basic applets_dir
825 prepare0: archprepare FORCE
826 $(Q)$(MAKE) $(build)=.
828 # All the preparing..
829 prepare prepare-all: prepare0
831 # Leave this as default for preprocessing busybox.lds.S, which is now
832 # done in arch/$(ARCH)/kernel/Makefile
834 export CPPFLAGS_busybox.lds += -P -C -U$(ARCH)
836 # FIXME: The asm symlink changes when $(ARCH) changes. That's
837 # hard to detect, but I suppose "make mrproper" is a good idea
838 # before switching between archs anyway.
841 #bbox# @echo ' SYMLINK $@ -> include/asm-$(ARCH)'
842 #bbox# $(Q)if [ ! -d include ]; then mkdir -p include; fi;
843 #bbox# @ln -fsn asm-$(ARCH) $@
845 # Split autoconf.h into include/linux/config/*
846 quiet_cmd_gen_bbconfigopts = GEN include/bbconfigopts.h
847 cmd_gen_bbconfigopts = $(srctree)/scripts/mkconfigs include/bbconfigopts.h include/bbconfigopts_bz2.h
848 quiet_cmd_gen_common_bufsiz = GEN include/common_bufsiz.h
849 cmd_gen_common_bufsiz = $(srctree)/scripts/generate_BUFSIZ.sh include/common_bufsiz.h
850 quiet_cmd_split_autoconf = SPLIT include/autoconf.h -> include/config/*
851 cmd_split_autoconf = scripts/basic/split-include include/autoconf.h include/config
852 #bbox# piggybacked generation of few .h files
853 include/config/MARKER: scripts/basic/split-include include/autoconf.h
854 $(call cmd,split_autoconf)
855 $(call cmd,gen_bbconfigopts)
856 $(call cmd,gen_common_bufsiz)
859 # Generate some files
860 # ---------------------------------------------------------------------------
862 # KERNELRELEASE can change from a few different places, meaning version.h
863 # needs to be updated, so this check is forced on all builds
867 define filechk_version.h
868 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
869 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
872 (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
873 echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
874 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
878 # ---------------------------------------------------------------------------
882 @echo '*** Warning: make $@ is unnecessary now.'
884 # ---------------------------------------------------------------------------
887 ifdef _BB_DISABLED_CONFIG_MODULES
889 # By default, build modules as well
896 modules: $(busybox-dirs) $(if $(KBUILD_BUILTIN),busybox)
897 @echo ' Building modules, stage 2.';
898 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
901 # Target to prepare building external modules
902 PHONY += modules_prepare
903 modules_prepare: prepare scripts
905 # Target to install modules
906 PHONY += modules_install
907 modules_install: _modinst_ _modinst_post
911 @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
912 echo "Warning: you may need to install module-init-tools"; \
913 echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
916 @rm -rf $(MODLIB)/kernel
917 @rm -f $(MODLIB)/source
918 @mkdir -p $(MODLIB)/kernel
919 @ln -s $(srctree) $(MODLIB)/source
920 @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
921 rm -f $(MODLIB)/build ; \
922 ln -s $(objtree) $(MODLIB)/build ; \
924 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
926 # If System.map exists, run depmod. This deliberately does not have a
927 # dependency on System.map since that would run the dependency tree on
928 # busybox. This depmod is only for convenience to give the initial
929 # boot a modules.dep even before / is mounted read-write. However the
930 # boot script depmod is the master version.
931 ifeq "$(strip $(INSTALL_MOD_PATH))" ""
934 depmod_opts := -b $(INSTALL_MOD_PATH) -r
936 PHONY += _modinst_post
937 _modinst_post: _modinst_
938 if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
940 else # CONFIG_MODULES
942 # Modules not configured
943 # ---------------------------------------------------------------------------
945 modules modules_install: FORCE
947 @echo "The present busybox configuration has modules disabled."
948 @echo "Type 'make config' and enable loadable module support."
949 @echo "Then build a kernel with module support enabled."
953 endif # CONFIG_MODULES
956 # Cleaning is done on three levels.
957 # make clean Delete most generated files
958 # Leave enough to build external modules
959 # make mrproper Delete the current configuration, and all generated files
960 # make distclean Remove editor backup files, patch leftover files and the like
962 # Directories & files removed with 'make clean'
963 CLEAN_DIRS += $(MODVERDIR) _install 0_lib
964 CLEAN_FILES += busybox busybox_unstripped* busybox.links \
965 System.map .kernelrelease \
966 .tmp_kallsyms* .tmp_version .tmp_busybox* .tmp_System.map
968 # Directories & files removed with 'make mrproper'
969 MRPROPER_DIRS += include/config include2
970 MRPROPER_FILES += .config .config.old include/asm .version .old_version \
971 include/NUM_APPLETS.h \
972 include/common_bufsiz.h \
974 include/bbconfigopts.h \
975 include/bbconfigopts_bz2.h \
976 include/usage_compressed.h \
977 include/applet_tables.h \
981 .kernelrelease Module.symvers tags TAGS cscope* \
984 # clean - Delete most, but leave enough to build external modules
986 clean: rm-dirs := $(CLEAN_DIRS)
987 clean: rm-files := $(CLEAN_FILES)
988 clean-dirs := $(addprefix _clean_,$(srctree) $(busybox-alldirs))
990 PHONY += $(clean-dirs) clean archclean
992 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
994 clean: archclean $(clean-dirs)
997 @find . $(RCS_FIND_IGNORE) \
998 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
999 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
1000 -type f -print | xargs rm -f
1003 doc-clean: rm-files := docs/busybox.pod \
1004 docs/BusyBox.html docs/busybox.1 docs/BusyBox.txt
1008 # mrproper - Delete all generated files, including .config
1010 mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1011 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1012 mrproper-dirs := $(addprefix _mrproper_,scripts)
1014 PHONY += $(mrproper-dirs) mrproper archmrproper
1016 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1018 mrproper: clean archmrproper $(mrproper-dirs)
1021 @find . -name Config.src | sed 's/.src$$/.in/' | xargs -r rm -f
1022 @find . -name Kbuild.src | sed 's/.src$$//' | xargs -r rm -f
1029 @find $(srctree) $(RCS_FIND_IGNORE) \
1030 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1031 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1032 -o -name '.*.rej' -o -name '*.tmp' -o -size 0 \
1033 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
1034 -type f -print | xargs rm -f
1037 # Packaging of the kernel to various formats
1038 # ---------------------------------------------------------------------------
1039 # rpm target kept for backward compatibility
1040 package-dir := $(srctree)/scripts/package
1043 $(Q)$(MAKE) $(build)=$(package-dir) $@
1045 $(Q)$(MAKE) $(build)=$(package-dir) $@
1048 # Brief documentation of the typical targets used
1049 # ---------------------------------------------------------------------------
1051 boards := $(wildcard $(srctree)/configs/*_defconfig)
1052 boards := $(notdir $(boards))
1054 -include $(srctree)/Makefile.help
1056 # Documentation targets
1057 # ---------------------------------------------------------------------------
1058 %docs: scripts_basic FORCE
1059 $(Q)$(MAKE) $(build)=Documentation/DocBook $@
1061 else # KBUILD_EXTMOD
1064 # External module support.
1065 # When building external modules the kernel used as basis is considered
1066 # read-only, and no consistency checks are made and the make
1067 # system is not used on the basis kernel. If updates are required
1068 # in the basis kernel ordinary make commands (without M=...) must
1071 # The following are the only valid targets when building external
1073 # make M=dir clean Delete all automatically generated files
1074 # make M=dir modules Make all modules in specified dir
1075 # make M=dir Same as 'make M=dir modules'
1076 # make M=dir modules_install
1077 # Install the modules build in the module directory
1078 # Assumes install directory is already created
1080 # We are always building modules
1082 PHONY += crmodverdir
1084 $(Q)mkdir -p $(MODVERDIR)
1085 $(Q)rm -f $(MODVERDIR)/*
1087 PHONY += $(objtree)/Module.symvers
1088 $(objtree)/Module.symvers:
1089 @test -e $(objtree)/Module.symvers || ( \
1091 echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1092 echo " is missing; modules will have no dependencies and modversions."; \
1095 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1096 PHONY += $(module-dirs) modules
1097 $(module-dirs): crmodverdir $(objtree)/Module.symvers
1098 $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1100 modules: $(module-dirs)
1101 @echo ' Building modules, stage 2.';
1102 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
1104 PHONY += modules_install
1105 modules_install: _emodinst_ _emodinst_post
1107 install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1110 $(Q)mkdir -p $(MODLIB)/$(install-dir)
1111 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
1113 # Run depmod only is we have System.map and depmod is executable
1114 quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
1115 cmd_depmod = if [ -r System.map -a -x $(DEPMOD) ]; then \
1116 $(DEPMOD) -ae -F System.map \
1117 $(if $(strip $(INSTALL_MOD_PATH)), \
1118 -b $(INSTALL_MOD_PATH) -r) \
1122 PHONY += _emodinst_post
1123 _emodinst_post: _emodinst_
1126 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1128 PHONY += $(clean-dirs) clean
1130 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1132 clean: rm-dirs := $(MODVERDIR)
1133 clean: $(clean-dirs)
1135 @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
1136 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1137 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
1138 -type f -print | xargs rm -f
1141 PHONY += prepare scripts
1144 endif # KBUILD_EXTMOD
1146 # Generate tags for editors
1147 # ---------------------------------------------------------------------------
1149 #We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
1150 #(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
1151 #Adding $(srctree) adds about 20M on i386 to the size of the output file!
1153 ifeq ($(src),$(obj))
1156 __srctree = $(srctree)/
1159 ifeq ($(ALLSOURCE_ARCHS),)
1161 ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
1163 ALLINCLUDE_ARCHS := $(ARCH)
1166 #Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
1167 ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
1170 ALLSOURCE_ARCHS := $(ARCH)
1173 ( find -regex '.*\.[ch]$$' )
1176 quiet_cmd_cscope-file = FILELST cscope.files
1177 cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
1179 quiet_cmd_cscope = MAKE cscope.out
1180 cmd_cscope = cscope -b
1183 $(call cmd,cscope-file)
1186 quiet_cmd_TAGS = MAKE $@
1189 ETAGSF=`etags --version | grep -i exuberant >/dev/null && \
1190 echo "-I __initdata,__exitdata,__acquires,__releases \
1191 -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
1192 --extra=+f --c-kinds=+px"`; \
1193 $(all-sources) | xargs etags $$ETAGSF -a
1200 quiet_cmd_tags = MAKE $@
1203 CTAGSF=`ctags --version | grep -i exuberant >/dev/null && \
1204 echo "-I __initdata,__exitdata,__acquires,__releases \
1205 -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
1206 --extra=+f --c-kinds=+px"`; \
1207 $(all-sources) | xargs ctags $$CTAGSF -a
1214 # Scripts to check various things for consistency
1215 # ---------------------------------------------------------------------------
1218 find * $(RCS_FIND_IGNORE) \
1219 -name '*.[hcS]' -type f -print | sort \
1220 | xargs $(PERL) -w scripts/checkincludes.pl
1223 find * $(RCS_FIND_IGNORE) \
1224 -name '*.[hcS]' -type f -print | sort \
1225 | xargs $(PERL) -w scripts/checkversion.pl
1228 $(PERL) $(srctree)/scripts/namespace.pl
1230 endif #ifeq ($(config-targets),1)
1231 endif #ifeq ($(mixed-targets),1)
1235 $(OBJDUMP) -d busybox $$(find . -name '*.ko') | \
1236 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1239 $(if $(wildcard .kernelrelease), $(Q)echo $(KERNELRELEASE), \
1240 $(error kernelrelease not valid - run 'make *config' to update it))
1242 @echo $(KERNELVERSION)
1245 # ---------------------------------------------------------------------------
1246 # Single targets are compatible with:
1247 # - build whith mixed source and output
1248 # - build with separate output dir 'make O=...'
1249 # - external modules
1251 # target-dir => where to store outputfile
1252 # build-dir => directory in kernel source tree to use
1254 ifeq ($(KBUILD_EXTMOD),)
1255 build-dir = $(patsubst %/,%,$(dir $@))
1256 target-dir = $(dir $@)
1258 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1259 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1260 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1263 %.s: %.c prepare scripts FORCE
1264 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1265 %.i: %.c prepare scripts FORCE
1266 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1267 %.o: %.c prepare scripts FORCE
1268 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1269 %.lst: %.c prepare scripts FORCE
1270 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1271 %.s: %.S prepare scripts FORCE
1272 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1273 %.o: %.S prepare scripts FORCE
1274 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1277 %/: prepare scripts FORCE
1278 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1279 $(build)=$(build-dir)
1280 /: prepare scripts FORCE
1281 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1282 $(build)=$(build-dir)
1284 %.ko: prepare scripts FORCE
1285 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1286 $(build)=$(build-dir) $(@:.ko=.o)
1287 $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
1289 # FIXME Should go into a make.lib or something
1290 # ===========================================================================
1292 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1293 cmd_rmdirs = rm -rf $(rm-dirs)
1295 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1296 cmd_rmfiles = rm -f $(rm-files)
1299 a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
1300 $(NOSTDINC_FLAGS) $(CPPFLAGS) \
1301 $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
1303 quiet_cmd_as_o_S = AS $@
1304 cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
1306 # read all saved command lines
1308 targets := $(wildcard $(sort $(targets)))
1309 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1311 ifneq ($(cmd_files),)
1312 $(cmd_files): ; # Do not try to update included dependency files
1313 include $(cmd_files)
1316 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1318 # $(Q)$(MAKE) $(clean)=dir
1319 clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1321 endif # skip-makefile
1326 -include $(srctree)/Makefile.custom
1328 # Declare the contents of the .PHONY variable as phony. We keep that
1329 # information in a variable se we can use it in if_changed and friends.