2 # Tool mainly for U-Boot Quality Assurance: build one or more board
3 # configurations with minimal verbosity, showing only warnings and
6 # SPDX-License-Identifier: GPL-2.0+
10 # if exiting with 0, write to stdout, else write to stderr
12 [ "${ret}" -eq 1 ] && exec 1>&2
14 Usage: MAKEALL [options] [--] [boards-to-build]
17 -a ARCH, --arch ARCH Build all boards with arch ARCH
18 -c CPU, --cpu CPU Build all boards with cpu CPU
19 -v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR
20 -s SOC, --soc SOC Build all boards with soc SOC
21 -b BOARD, --board BOARD Build all boards with board name BOARD
22 -l, --list List all targets to be built
23 -m, --maintainers List all targets and maintainer email
24 -M, --mails List all targets and all affilated emails
25 -C, --check Enable build checking
26 -n, --continue Continue (skip boards already built)
27 -r, --rebuild-errors Rebuild any boards that errored
28 -h, --help This help output
30 Selections by these options are logically ANDed; if the same option
31 is used repeatedly, such selections are ORed. So "-v FOO -v BAR"
32 will select all configurations where the vendor is either FOO or
33 BAR. Any additional arguments specified on the command line are
34 always build additionally. See the boards.cfg file for more info.
36 If no boards are specified, then the default is "powerpc".
38 Environment variables:
39 BUILD_NCPUS number of parallel make jobs (default: auto)
40 CROSS_COMPILE cross-compiler toolchain prefix (default: "")
41 CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
42 architecture "ARCH". Substitute "ARCH" for any
43 supported architecture (default: "")
44 MAKEALL_LOGDIR output all logs to here (default: ./LOG/)
45 BUILD_DIR output build directory (default: ./)
46 BUILD_NBUILDS number of parallel targets (default: 1)
49 - build all Power Architecture boards:
51 MAKEALL --arch powerpc
53 - build all PowerPC boards manufactured by vendor "esd":
54 MAKEALL -a powerpc -v esd
55 - build all PowerPC boards manufactured either by "keymile" or "siemens":
56 MAKEALL -a powerpc -v keymile -v siemens
57 - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
58 MAKEALL -c mpc83xx -v freescale 4xx
63 SHORT_OPTS="ha:c:v:s:b:lmMCnr"
64 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
66 # Option processing based on util-linux-2.13/getopt-parse.bash
68 # Note that we use `"$@"' to let each command-line parameter expand to a
69 # separate word. The quotes around `$@' are essential!
70 # We need TEMP as the `eval set --' would nuke the return value of
72 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
75 [ $? != 0 ] && usage 1
77 # Note the quotes around `$TEMP': they are essential!
90 # echo "Option ARCH: argument \`$2'"
91 if [ "$opt_a" ] ; then
92 opt_a="${opt_a%)} || \$2 == \"$2\")"
94 opt_a="(\$2 == \"$2\")"
99 # echo "Option CPU: argument \`$2'"
100 if [ "$opt_c" ] ; then
101 opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
103 opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
108 # echo "Option SoC: argument \`$2'"
109 if [ "$opt_s" ] ; then
110 opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
112 opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
117 # echo "Option VENDOR: argument \`$2'"
118 if [ "$opt_v" ] ; then
119 opt_v="${opt_v%)} || \$5 == \"$2\")"
121 opt_v="(\$5 == \"$2\")"
126 # echo "Option BOARD: argument \`$2'"
127 if [ "$opt_b" ] ; then
128 opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
130 # We need to check the 7th field too
131 # for boards whose 6th field is "-"
132 opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
162 echo "Internal error!" >&2 ; exit 1 ;;
165 # echo "Remaining arguments:"
166 # for arg do echo '--> '"\`$arg'" ; done
169 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
170 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
171 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
172 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
173 [ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
175 if [ "$SELECTED" ] ; then
176 SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
178 # Make sure some boards from boards.cfg are actually found
179 if [ -z "$SELECTED" ] ; then
180 echo "Error: No boards selected, invalid arguments"
185 #########################################################################
187 # Print statistics when we exit
191 # Determine number of CPU cores if no default was set
192 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
194 if [ "$BUILD_NCPUS" -gt 1 ]
196 JOBS="-j $((BUILD_NCPUS + 1))"
201 if [ "${MAKEALL_LOGDIR}" ] ; then
202 LOG_DIR=${MAKEALL_LOGDIR}
207 : ${BUILD_NBUILDS:=1}
210 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
212 : ${BUILD_DIR:=./build}
213 mkdir -p "${BUILD_DIR}/ERR"
214 find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
219 OUTPUT_PREFIX="${BUILD_DIR}"
221 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
222 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
223 find "${LOG_DIR}/" -type f -exec rm -f {} +
228 # Keep track of the number of builds and errors
239 # Helper funcs for parsing boards.cfg
245 awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
249 targets_by_arch() { targets_by_field 2 "$@" ; }
250 targets_by_cpu() { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
251 targets_by_soc() { targets_by_field 4 "$@" ; }
253 #########################################################################
255 #########################################################################
257 LIST_5xx="$(targets_by_cpu mpc5xx)"
259 #########################################################################
261 #########################################################################
263 LIST_5xxx="$(targets_by_cpu mpc5xxx)"
265 #########################################################################
267 #########################################################################
269 LIST_512x="$(targets_by_cpu mpc512x)"
271 #########################################################################
273 #########################################################################
275 LIST_8xx="$(targets_by_cpu mpc8xx)"
277 #########################################################################
279 #########################################################################
281 LIST_4xx="$(targets_by_cpu ppc4xx)"
283 #########################################################################
285 #########################################################################
287 LIST_824x="$(targets_by_cpu mpc824x)"
289 #########################################################################
290 ## MPC8260 Systems (includes 8250, 8255 etc.)
291 #########################################################################
293 LIST_8260="$(targets_by_cpu mpc8260)"
295 #########################################################################
296 ## MPC83xx Systems (includes 8349, etc.)
297 #########################################################################
299 LIST_83xx="$(targets_by_cpu mpc83xx)"
301 #########################################################################
302 ## MPC85xx Systems (includes 8540, 8560 etc.)
303 #########################################################################
305 LIST_85xx="$(targets_by_cpu mpc85xx)"
307 #########################################################################
309 #########################################################################
311 LIST_86xx="$(targets_by_cpu mpc86xx)"
313 #########################################################################
315 #########################################################################
317 LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)"
319 #########################################################################
321 #########################################################################
343 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
344 # still using "ppc" instead of "powerpc"
349 #########################################################################
351 #########################################################################
353 LIST_SA="$(targets_by_cpu sa1100)"
355 #########################################################################
357 #########################################################################
359 LIST_ARM7="$(targets_by_cpu arm720t)"
361 #########################################################################
363 #########################################################################
365 LIST_ARM9="$(targets_by_cpu arm920t) \
366 $(targets_by_cpu arm926ejs) \
367 $(targets_by_cpu arm946es) \
370 #########################################################################
372 #########################################################################
373 LIST_ARM11="$(targets_by_cpu arm1136) \
374 $(targets_by_cpu arm1176) \
377 #########################################################################
379 #########################################################################
381 LIST_ARMV7="$(targets_by_cpu armv7)"
383 #########################################################################
385 #########################################################################
387 LIST_ARMV8="$(targets_by_cpu armv8)"
389 #########################################################################
391 #########################################################################
393 LIST_at91="$(targets_by_soc at91)"
395 #########################################################################
397 #########################################################################
399 LIST_pxa="$(targets_by_cpu pxa)"
401 #########################################################################
403 #########################################################################
405 LIST_spear="$(targets_by_soc spear)"
407 #########################################################################
409 #########################################################################
411 LIST_arm="$(targets_by_arch arm | \
412 for ARMV8_TARGET in $LIST_ARMV8; \
413 do sed "/$ARMV8_TARGET/d"; \
417 #########################################################################
418 ## MIPS Systems (default = big endian)
419 #########################################################################
425 vct_platinum_onenand \
426 vct_platinum_onenand_small \
428 vct_platinumavc_small \
429 vct_platinumavc_onenand \
430 vct_platinumavc_onenand_small \
433 vct_premium_onenand \
434 vct_premium_onenand_small \
450 #########################################################################
451 ## MIPS Systems (little endian)
452 #########################################################################
461 #########################################################################
463 #########################################################################
465 LIST_openrisc="$(targets_by_arch openrisc)"
467 #########################################################################
469 #########################################################################
471 LIST_x86="$(targets_by_arch x86)"
473 #########################################################################
475 #########################################################################
477 LIST_nios2="$(targets_by_arch nios2)"
479 #########################################################################
480 ## MicroBlaze Systems
481 #########################################################################
483 LIST_microblaze="$(targets_by_arch microblaze)"
485 #########################################################################
487 #########################################################################
489 LIST_m68k="$(targets_by_arch m68k)"
490 LIST_coldfire=${LIST_m68k}
492 #########################################################################
494 #########################################################################
496 LIST_avr32="$(targets_by_arch avr32)"
498 #########################################################################
500 #########################################################################
502 LIST_blackfin="$(targets_by_arch blackfin)"
504 #########################################################################
506 #########################################################################
508 LIST_sh2="$(targets_by_cpu sh2)"
509 LIST_sh3="$(targets_by_cpu sh3)"
510 LIST_sh4="$(targets_by_cpu sh4)"
512 LIST_sh="$(targets_by_arch sh)"
514 #########################################################################
516 #########################################################################
518 LIST_sparc="$(targets_by_arch sparc)"
520 #########################################################################
522 #########################################################################
524 LIST_nds32="$(targets_by_arch nds32)"
526 #########################################################################
528 #########################################################################
530 LIST_arc="$(targets_by_arch arc)"
532 #-----------------------------------------------------------------------
534 get_target_location() {
542 local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
543 if [ -z "${line}" ] ; then echo "" ; return ; fi
547 CONFIG_NAME="${7%_config}"
549 [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
551 if [ $# -gt 5 ]; then
552 if [ "$6" = "-" ] ; then
559 [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
560 [ $# -gt 6 ] && [ "$8" != "-" ] && {
567 # Assign board directory to BOARDIR variable
568 if [ "${vendor}" == "-" ] ; then
571 BOARDDIR=${vendor}/${board}
574 echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
577 get_target_maintainers() {
578 local name=`echo $1 | cut -d : -f 3`
580 local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
581 if [ -z "${line}" ]; then
586 local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
587 [ "$mails" == "-" ] && mails=""
595 local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
597 if [ -z "${line}" ] ; then echo "" ; return ; fi
604 if [ "$PRINT_MAINTS" != 'y' ] ; then
611 local loc=`get_target_location $1`
613 if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
615 local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
617 if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
619 local dir=`echo ${loc} | cut -d ":" -f 2`
620 local cfg=`echo ${loc} | cut -d ":" -f 1`
621 local git_result=`git log --format=%aE board/${dir} \
622 include/configs/${cfg}.h | grep "@"`
623 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
625 local git_result_top=`echo ${git_result} | tr " " "\n" | \
626 sort | uniq -c | sort -nr | head -n 3 | \
627 sed "s/^ \+[0-9]\+ \+//"`
629 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
630 sort -u | tr "\n" " " | sed "s/ $//" ;
632 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
639 # Each finished build will have a file called ${donep}${n},
640 # where n is the index of the build. Each build
641 # we've already noted as finished will have ${skipp}${n}.
642 # The code managing the build process will use this information
643 # to ensure that only BUILD_NBUILDS builds are in flight at once
644 donep="${LOG_DIR}/._done_"
645 skipp="${LOG_DIR}/._skip_"
647 build_target_killed() {
648 echo "Aborted $target build."
649 # Remove the logs for this board since it was aborted
650 rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
658 if [ "$ONLY_LIST" == 'y' ] ; then
659 list_target ${target}
663 if [ $BUILD_MANY == 1 ] ; then
664 output_dir="${OUTPUT_PREFIX}/${target}"
665 mkdir -p "${output_dir}"
666 trap build_target_killed TERM
668 output_dir="${OUTPUT_PREFIX}"
671 target_arch=$(get_target_arch ${target})
672 eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
673 if [ "${cross_toolchain}" ] ; then
674 MAKE="make CROSS_COMPILE=${cross_toolchain}"
675 elif [ "${CROSS_COMPILE}" ] ; then
676 MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
681 if [ "${output_dir}" != "." ] ; then
682 MAKE="${MAKE} O=${output_dir}"
685 ${MAKE} distclean >/dev/null
686 ${MAKE} -s ${target}_config
688 ${MAKE} ${JOBS} ${CHECK} all \
689 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
691 # Check for 'make' errors
692 if [ ${PIPESTATUS[0]} -ne 0 ] ; then
696 if [ $BUILD_MANY == 1 ] ; then
701 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
702 cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
704 rm ${LOG_DIR}/${target}.ERR
707 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
708 if grep -iw error ${LOG_DIR}/${target}.ERR ; then
709 : $(( ERR_CNT += 1 ))
710 ERR_LIST="${ERR_LIST} $target"
712 : $(( WRN_CNT += 1 ))
713 WRN_LIST="${WRN_LIST} $target"
716 rm ${LOG_DIR}/${target}.ERR
720 OBJS=${output_dir}/u-boot
721 if [ -e ${output_dir}/spl/u-boot-spl ]; then
722 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
725 ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
727 [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
729 touch "${donep}${build_idx}"
733 search_idx=${OLDEST_IDX}
734 if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
737 if [ -e "${donep}${search_idx}" ] ; then
738 : $(( CURRENT_CNT-- ))
739 [ ${OLDEST_IDX} -eq ${search_idx} ] &&
740 : $(( OLDEST_IDX++ ))
742 # Only want to count it once
743 rm -f "${donep}${search_idx}"
744 touch "${skipp}${search_idx}"
745 elif [ -e "${skipp}${search_idx}" ] ; then
746 [ ${OLDEST_IDX} -eq ${search_idx} ] &&
747 : $(( OLDEST_IDX++ ))
749 : $(( search_idx++ ))
750 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
751 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
752 search_idx=${OLDEST_IDX}
763 # If a LIST_xxx var exists, use it. But avoid variable
764 # expansion in the eval when a board name contains certain
765 # characters that the shell interprets.
768 *) list=$(eval echo '${LIST_'$t'}') ;;
770 if [ -n "${list}" ] ; then
771 build_targets ${list}
773 : $((TOTAL_CNT += 1))
774 : $((CURRENT_CNT += 1))
775 rm -f "${donep}${TOTAL_CNT}"
776 rm -f "${skipp}${TOTAL_CNT}"
777 if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
779 touch "${donep}${TOTAL_CNT}"
780 elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
782 touch "${donep}${TOTAL_CNT}"
784 if [ $BUILD_MANY == 1 ] ; then
785 build_target ${t} ${TOTAL_CNT} &
788 build_target ${t} ${TOTAL_CNT}
794 # We maintain a running count of all the builds we have done.
795 # Each finished build will have a file called ${donep}${n},
796 # where n is the index of the build. Each build
797 # we've already noted as finished will have ${skipp}${n}.
798 # We track the current index via TOTAL_CNT, and the oldest
799 # index. When we exceed the maximum number of parallel builds,
800 # We look from oldest to current for builds that have completed,
801 # and update the current count and oldest index as appropriate.
802 # If we've gone through the entire list, wait a second, and
803 # reprocess the entire list until we find a build that has
805 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
811 #-----------------------------------------------------------------------
818 # Mac OS X is known to have BSD style ps
819 local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
820 children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
823 # everything else tries the GNU style
824 local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
825 children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
829 kill $children 2> /dev/null
830 wait $children 2> /dev/null
836 if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
838 # Only count boards that completed
839 : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
841 rm -f ${donep}* ${skipp}*
843 if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
844 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
845 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
846 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
847 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
848 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
849 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
851 # Remove the logs for any board that was interrupted
852 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
855 : $((TOTAL_CNT -= ${SKIP_CNT}))
857 echo "--------------------- SUMMARY ----------------------------"
858 if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
859 echo "Boards skipped: ${SKIP_CNT}"
861 echo "Boards compiled: ${TOTAL_CNT}"
862 if [ ${ERR_CNT} -gt 0 ] ; then
863 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
865 if [ ${WRN_CNT} -gt 0 ] ; then
866 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
868 echo "----------------------------------------------------------"
870 if [ $BUILD_MANY == 1 ] ; then
877 #-----------------------------------------------------------------------
879 # Build target groups selected by options, plus any command line args
880 set -- ${SELECTED} "$@"
881 # run PowerPC by default
882 [ $# = 0 ] && set -- powerpc