Documentation/devicetree/bindings/clock/ti/davinci/psc.txt

   1 Binding for TI DaVinci Power Sleep Controller (PSC)
   2
   3 The PSC provides power management, clock gating and reset functionality. It is
   4 primarily used for clocking.
   5
   6 Required properties:
   7 - compatible: shall be one of:
   8         - "ti,da850-psc0" for PSC0 on DA850/OMAP-L138/AM18XX
   9         - "ti,da850-psc1" for PSC1 on DA850/OMAP-L138/AM18XX
  10 - reg: physical base address and size of the controller's register area
  11 - #clock-cells: from common clock binding; shall be set to 1
  12 - #power-domain-cells: from generic power domain binding; shall be set to 1.
  13 - clocks: phandles to clocks corresponding to the clock-names property
  14 - clock-names: list of parent clock names - depends on compatible value
  15         - for "ti,da850-psc0", shall be "pll0_sysclk1", "pll0_sysclk2",
  16           "pll0_sysclk4", "pll0_sysclk6", "async1"
  17         - for "ti,da850-psc1", shall be "pll0_sysclk2", "pll0_sysclk4", "async3"
  18
  19 Optional properties:
  20 - #reset-cells: from reset binding; shall be set to 1 - only applicable when
  21   at least one local domain provides a local reset.
  22
  23 Consumers:
  24
  25         Clock, power domain and reset consumers shall use the local power domain
  26         module ID (LPSC) as the index corresponding to the clock cell. Refer to
  27         the device-specific datasheet to find these numbers. NB: Most local
  28         domains only provide a clock/power domain and not a reset.
  29
  30 Examples:
  31
  32         psc0: clock-controller@10000 {
  33                 compatible = "ti,da850-psc0";
  34                 reg = <0x10000 0x1000>;
  35                 #clock-cells = <1>;
  36                 #power-domain-cells = <1>;
  37                 #reset-cells = <1>;
  38                 clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
  39                          <&pll0_sysclk 4>, <&pll0_sysclk 6>, <&async1_clk>;
  40                 clock_names = "pll0_sysclk1", "pll0_sysclk2",
  41                               "pll0_sysclk4", "pll0_sysclk6", "async1";
  42         };
  43         psc1: clock-controller@227000 {
  44                 compatible = "ti,da850-psc1";
  45                 reg = <0x227000 0x1000>;
  46                 #clock-cells = <1>;
  47                 #power-domain-cells = <1>;
  48                 clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, <&async3_clk>;
  49                 clock_names = "pll0_sysclk2", "pll0_sysclk4", "async3";
  50         };
  51
  52         /* consumer */
  53         dsp: dsp@11800000 {
  54                 compatible = "ti,da850-dsp";
  55                 reg = <0x11800000 0x40000>,
  56                       <0x11e00000 0x8000>,
  57                       <0x11f00000 0x8000>,
  58                       <0x01c14044 0x4>,
  59                       <0x01c14174 0x8>;
  60                 reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
  61                 interrupt-parent = <&intc>;
  62                 interrupts = <28>;
  63                 clocks = <&psc0 15>;
  64                 power-domains = <&psc0 15>;
  65                 resets = <&psc0 15>;
  66         };
  67
  68 Also see:
  69 - Documentation/devicetree/bindings/clock/clock-bindings.txt
  70 - Documentation/devicetree/bindings/power/power_domain.txt
  71 - Documentation/devicetree/bindings/reset/reset.txt