2 What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
4 Contact: Marek Lindner <lindner_marek@yahoo.de>
6 Indicates whether the batman protocol messages of the
7 mesh <mesh_iface> shall be aggregated or not.
9 What: /sys/class/net/<mesh_iface>/mesh/ap_isolation
11 Contact: Antonio Quartulli <ordex@autistici.org>
13 Indicates whether the data traffic going from a
14 wireless client to another wireless client will be
17 What: /sys/class/net/<mesh_iface>/mesh/bonding
19 Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
21 Indicates whether the data traffic going through the
22 mesh will be sent using multiple interfaces at the
23 same time (if available).
25 What: /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
27 Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
29 Indicates whether the bridge loop avoidance feature
30 is enabled. This feature detects and avoids loops
31 between the mesh and devices bridged with the soft
32 interface <mesh_iface>.
34 What: /sys/class/net/<mesh_iface>/mesh/fragmentation
36 Contact: Andreas Langer <an.langer@gmx.de>
38 Indicates whether the data traffic going through the
39 mesh will be fragmented or silently discarded if the
40 packet size exceeds the outgoing interface MTU.
42 What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
44 Contact: Marek Lindner <lindner_marek@yahoo.de>
46 Defines the bandwidth which is propagated by this
47 node if gw_mode was set to 'server'.
49 What: /sys/class/net/<mesh_iface>/mesh/gw_mode
51 Contact: Marek Lindner <lindner_marek@yahoo.de>
53 Defines the state of the gateway features. Can be
54 either 'off', 'client' or 'server'.
56 What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class
58 Contact: Marek Lindner <lindner_marek@yahoo.de>
60 Defines the selection criteria this node will use
61 to choose a gateway if gw_mode was set to 'client'.
63 What: /sys/class/net/<mesh_iface>/mesh/hop_penalty
65 Contact: Linus Lüssing <linus.luessing@web.de>
67 Defines the penalty which will be applied to an
68 originator message's tq-field on every hop.
70 What: /sys/class/net/<mesh_iface>/mesh/network_coding
72 Contact: Martin Hundeboll <martin@hundeboll.net>
74 Controls whether Network Coding (using some magic
75 to send fewer wifi packets but still the same
76 content) is enabled or not.
78 What: /sys/class/net/<mesh_iface>/mesh/orig_interval
80 Contact: Marek Lindner <lindner_marek@yahoo.de>
82 Defines the interval in milliseconds in which batman
83 sends its protocol messages.
85 What: /sys/class/net/<mesh_iface>/mesh/routing_algo
87 Contact: Marek Lindner <lindner_marek@yahoo.de>
89 Defines the routing procotol this mesh instance
90 uses to find the optimal paths through the mesh.
92 What: /sys/class/net/<mesh_iface>/mesh/vis_mode
94 Contact: Marek Lindner <lindner_marek@yahoo.de>
96 Each batman node only maintains information about its
97 own local neighborhood, therefore generating graphs
98 showing the topology of the entire mesh is not easily
99 feasible without having a central instance to collect
100 the local topologies from all nodes. This file allows
101 to activate the collecting (server) mode.