1 # Copyright (C) 2006-2010 OpenWrt.org
3 # This is free software, licensed under the GNU General Public License v2.
4 # See /LICENSE for more information.
7 mainmenu "OpenWrt Configuration"
13 source "target/Config.in"
17 menuconfig TARGET_ROOTFS_INITRAMFS
19 default y if USES_INITRAMFS
21 Embed the rootfs into the kernel (initramfs)
25 default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
26 default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
27 default TARGET_INITRAMFS_COMPRESSION_NONE
28 depends TARGET_ROOTFS_INITRAMFS
30 Select ramdisk compression.
32 config TARGET_INITRAMFS_COMPRESSION_NONE
35 config TARGET_INITRAMFS_COMPRESSION_GZIP
38 config TARGET_INITRAMFS_COMPRESSION_BZIP2
41 config TARGET_INITRAMFS_COMPRESSION_LZMA
44 config TARGET_INITRAMFS_COMPRESSION_LZO
47 config TARGET_INITRAMFS_COMPRESSION_XZ
53 prompt "Use external cpio" if TARGET_ROOTFS_INITRAMFS
56 Kernel uses specified external cpio as INITRAMFS_SOURCE
58 comment "Root filesystem archives"
60 config TARGET_ROOTFS_CPIOGZ
62 default y if USES_CPIOGZ
64 Build a compressed cpio archive of the the root filesystem
66 config TARGET_ROOTFS_TARGZ
68 default y if USES_TARGZ
70 Build a compressed tar archive of the the root filesystem
72 comment "Root filesystem images"
74 config TARGET_ROOTFS_EXT4FS
76 default y if USES_EXT4
77 depends !TARGET_ROOTFS_INITRAMFS
79 Ext4 file system with some free space for uml images
81 config TARGET_ROOTFS_ISO
84 depends TARGET_ROOTFS_INITRAMFS && TARGET_x86
86 Create some bootable ISO image
88 config TARGET_ROOTFS_JFFS2
90 default y if USES_JFFS2
91 depends !TARGET_ROOTFS_INITRAMFS
93 Build a jffs2 root filesystem
95 config TARGET_ROOTFS_SQUASHFS
97 default y if USES_SQUASHFS
98 depends !TARGET_ROOTFS_INITRAMFS
100 Build a squashfs-lzma root filesystem
102 config TARGET_ROOTFS_UBIFS
104 default y if USES_UBIFS
105 depends !TARGET_ROOTFS_INITRAMFS && USES_UBIFS
107 Build a ubifs root filesystem
109 comment "Image Options"
111 source "target/linux/*/image/Config.in"
113 config TARGET_ROOTFS_PARTSIZE
114 int "Root filesystem partition size (in MB)"
115 depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532
118 Allows you to change the root filesystem partition size
120 config TARGET_ROOTFS_MAXINODE
121 int "Maximum number of inodes in root filesystem"
122 depends TARGET_ROOTFS_EXT4FS
125 Allows you to change the maximum number of inodes in the root filesystem
129 menu "Global build settings"
132 bool "Select all packages by default"
135 comment "General build options"
137 config DISPLAY_SUPPORT
138 bool "Show packages that require graphics support (local or remote)"
141 config BUILD_PATENTED
143 bool "Compile with support for patented functionality"
145 When this option is disabled, software which provides patented functionality will not be built.
146 In case software provides optional support for patented functionality,
147 this optional support will get disabled for this package.
151 bool "Compile with full language support"
153 When this option is enabled, packages are built with the full versions of iconv and GNU gettext
154 instead of the default OpenWrt stubs. If uClibc is used, it is also built with locale support.
156 config BUILD_STATIC_TOOLS
158 bool "Attempt to link host utilities statically"
160 Linking host utilities like sed or firmware-utils statically increases the portability of the
161 generated ImageBuilder and SDK tarballs, however it may fail on some Linux distributions.
163 config SHADOW_PASSWORDS
165 prompt "Enable shadow password support"
168 Enable shadow password support.
172 prompt "Remove ipkg/opkg status data files in final images"
175 This removes all ipkg/opkg status data files from the target directory before building the root fs
177 config COLLECT_KERNEL_DEBUG
179 prompt "Collect kernel debug information"
180 select KERNEL_DEBUG_INFO
183 This collects debugging symbols from the kernel and all compiled modules.
184 Useful for release builds, so that kernel issues can be debugged offline later.
186 comment "Kernel build options"
188 config KERNEL_DEBUG_FS
189 bool "Compile the kernel with Debug FileSystem enabled"
192 debugfs is a virtual file system that kernel developers use to put
193 debugging files into. Enable this option to be able to read and
194 write to these files.
196 config KERNEL_PROFILING
197 bool "Compile the kernel with profiling enabled"
200 Enable the extended profiling support mechanisms used by profilers such
203 config KERNEL_KALLSYMS
204 bool "Compile the kernel with symbol table information"
207 This will give you more information in stack traces from kernel oopses
210 bool "Compile the kernel with tracing support"
213 config KERNEL_ENABLE_DEFAULT_TRACERS
214 bool "Trace process context switches and events"
215 depends on KERNEL_FTRACE
218 config KERNEL_DEBUG_KERNEL
222 config KERNEL_DEBUG_INFO
223 bool "Compile the kernel with debug information"
225 select KERNEL_DEBUG_KERNEL
227 This will compile your kernel and modules with debug information.
229 config KERNEL_DEBUG_LL_UART_NONE
234 config KERNEL_DEBUG_LL
238 select KERNEL_DEBUG_LL_UART_NONE
240 ARM low level debugging
242 config KERNEL_EARLY_PRINTK
243 bool "Compile the kernel with early printk"
246 select KERNEL_DEBUG_KERNEL
247 select KERNEL_DEBUG_LL if arm
249 Compile the kernel with early printk support.
250 This is only useful for debugging purposes to send messages
251 over the serial console in early boot.
252 Enable this to debug early boot problems.
255 bool "Compile the kernel with asynchronous IO support"
258 config KERNEL_MAGIC_SYSRQ
259 bool "Compile the kernel with SysRq support"
262 config KERNEL_ELF_CORE
263 bool "Enable process core dump support"
266 config KERNEL_PROVE_LOCKING
267 bool "Enable kernel lock checking"
268 select KERNEL_DEBUG_KERNEL
271 config KERNEL_PRINTK_TIME
272 bool "Enable printk timestamps"
275 comment "Package build options"
279 prompt "Compile packages with debugging info"
282 Adds -g3 to the CFLAGS
286 prompt "Enable IPv6 support in packages"
289 Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts).
291 config PKG_BUILD_PARALLEL
293 prompt "Compile certain packages parallelized"
296 This adds a -jX option to certain packages that are known to
297 behave well for parallel build.
299 Note that this may overcommit CPU resources depending on the
300 -j level of the main make process, the number of package
301 submake jobs selected below and the number of actual CPUs present.
302 Example: If the main make is passed a -j4 and the submake -j
303 is also set to 4, we may end up with 16 parallel make processes
306 You get maximum build performance, if you set the package build
307 jobs to the number of CPUs (cores) available and also start the main
308 make process with -jX, where X is the number of CPUs (cores).
309 However, make sure you have enough RAM available for
310 NR_CPUS to the power of two (NR_CPUS^2) make jobs.
312 If you are unsure, select N.
314 config PKG_BUILD_JOBS
316 prompt "Number of package submake jobs (2-512)"
319 depends on PKG_BUILD_PARALLEL
321 The number of jobs (-jX) to pass to packages submake.
323 config PKG_DEFAULT_PARALLEL
325 prompt "Parallelize the default package build rule (May break build)"
326 depends on PKG_BUILD_PARALLEL
330 Always set the default package build rules to parallel build.
332 WARNING: This may break build or kill your cat, as it builds
333 packages with multiple jobs that are probably not tested in
334 a parallel build environment.
336 Only say Y, if you don't mind fixing broken packages.
337 Before reporting build bugs, set this to N and re-run the build.
339 config TOOLCHAIN_PARALLEL
341 prompt "Parallelize the toolchain build (May break build)"
342 depends on PKG_BUILD_PARALLEL
346 Build the toolchain with parallel make jobs.
347 This speeds up the toolchain build on SMP machines, but may
348 break the build for certain toolchain versions.
350 If you say Y, toolchain build might break.
351 Before reporting build bugs, set this to N and re-run the build.
353 comment "Stripping options"
356 prompt "Binary stripping method"
357 default USE_STRIP if EXTERNAL_TOOLCHAIN
358 default USE_STRIP if USE_GLIBC || USE_EGLIBC
361 Select the binary stripping method you wish to use.
366 This will install unstripped binaries (useful for native compiling/debugging)
371 This will install binaries stripped using strip from binutils
380 This will install binaries stripped using sstrip
385 prompt "Strip arguments"
387 default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG
388 default "--strip-all"
390 Specifies arguments passed to the strip command when stripping binaries
392 config STRIP_KERNEL_EXPORTS
393 bool "Strip unnecessary exports from the kernel image"
395 Reduces kernel size by stripping unused kernel exports from the kernel image
396 Note that this might make the kernel incompatible with any kernel modules that
397 were not selected at the time the kernel image was created
400 bool "Strip unnecessary functions from libraries"
402 Reduces libraries to only those functions that are necessary for using all
403 selected packages (including those selected as <M>)
404 Note that this will make the system libraries incompatible with most of the packages
405 that are not selected during the build process
408 prompt "Preferred standard C++ library"
409 default USE_LIBSTDCXX if USE_EGLIBC
412 Select the preferred standard C++ library for all packages that support this.
425 bool "Advanced configuration options (for developers)"
429 bool "Show broken platforms / packages" if DEVEL
432 config DOWNLOAD_FOLDER
433 string "Download folder" if DEVEL
437 string "Local mirror for source packages" if DEVEL
441 bool "Automatic rebuild of packages" if DEVEL
444 Automatically rebuild packages when their files change
447 string "Build suffix to append to the BUILD_DIR variable" if DEVEL
450 Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix
452 config TARGET_ROOTFS_DIR
453 string "Override the default TARGET_ROOTFS_DIR variable" if DEVEL
456 Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path.
457 Use this option to re-define the location of the target root file system directory.
460 bool "Use ccache" if DEVEL
463 Compiler cache; see http://ccache.samba.org/
465 config EXTERNAL_KERNEL_TREE
466 string "Use external kernel tree" if DEVEL
469 config KERNEL_GIT_CLONE_URI
470 string "Enter git repository to clone" if DEVEL
473 Enter the full git repository path i.e.:
474 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
475 This will create a git clone of the kernel in your build
478 config KERNEL_GIT_LOCAL_REPOSITORY
479 string "Enter path to local reference repository" if DEVEL
482 Enter a full pathname to a local reference git repository.
483 In this instance, the --refererence option of git clone will
484 be used thus creating a quick local clone of your repo.
487 bool "Enable log files during build process" if DEVEL
489 If enabled log files will be written to the ./log directory
491 config SRC_TREE_OVERRIDE
492 bool "Enable package source tree override" if DEVEL
494 If enabled, you can force a package to use a git tree as source
495 code instead of the normal tarball. Create a symlink 'git-src'
496 in the package directory, pointing to the .git tree that you want
497 to pull the source code from
499 menuconfig TARGET_OPTIONS
500 bool "Target Options" if DEVEL
502 config TARGET_OPTIMIZATION
503 string "Target Optimizations" if TARGET_OPTIONS
504 default DEFAULT_TARGET_OPTIMIZATION
506 Optimizations to use when building for the target host.
509 bool "Use software floating point by default" if TARGET_OPTIONS
511 depends on (arm || armeb || powerpc || mipsel || mips) && !HAS_FPU
513 If your target CPU does not have a Floating Point Unit (FPU) or a
514 kernel FPU emulator, but you still wish to support floating point
515 functions, then everything will need to be compiled with soft floating
516 point support (-msoft-float).
518 Most people will answer N.
520 source "toolchain/Config.in"
522 source "target/imagebuilder/Config.in"
523 source "target/sdk/Config.in"
524 source "target/toolchain/Config.in"
526 source "tmp/.config-package.in"