2 # For a description of the syntax of this configuration file,
3 # see scripts/kbuild/config-language.txt.
6 mainmenu "BusyBox Configuration"
12 menu "Busybox Settings"
14 menu "General Configuration"
17 bool "See lots more (probably unnecessary) configuration options."
20 Some BusyBox applets have more configuration options than anyone
21 will ever care about. To avoid drowining people in complexity, most
22 of the applet features that can be set to a sane default value are
23 hidden, unless you hit the above switch.
25 This is better than to telling people to edit the busybox source
26 code, but not by much.
28 See http://en.wikipedia.org/wiki/Fibber_McGee_and_Molly#The_Closet
33 prompt "Buffer allocation policy"
34 default CONFIG_FEATURE_BUFFERS_USE_MALLOC
35 depends on CONFIG_NITPICK
37 There are 3 ways BusyBox can handle buffer allocations:
38 - Use malloc. This costs code size for the call to xmalloc.
39 - Put them on stack. For some very small machines with limited stack
40 space, this can be deadly. For most folks, this works just fine.
41 - Put them in BSS. This works beautifully for computers with a real
42 MMU (and OS support), but wastes runtime RAM for uCLinux. This
43 behavior was the only one available for BusyBox versions 0.48 and
46 config CONFIG_FEATURE_BUFFERS_USE_MALLOC
47 bool "Allocate with Malloc"
49 config CONFIG_FEATURE_BUFFERS_GO_ON_STACK
50 bool "Allocate on the Stack"
52 config CONFIG_FEATURE_BUFFERS_GO_IN_BSS
53 bool "Allocate in the .bss section"
57 config CONFIG_SHOW_USAGE
58 bool "Show terse applet usage messages"
61 All BusyBox applets will show help messages when invoked with
62 wrong arguments. You can turn off printing these terse usage
63 messages if you say no here.
64 This will save you up to 7k.
66 config CONFIG_FEATURE_VERBOSE_USAGE
67 bool "Show verbose applet usage messages"
69 select CONFIG_SHOW_USAGE
71 All BusyBox applets will show more verbose help messages when
72 busybox is invoked with --help. This will add a lot of text to the
73 busybox binary. In the default configuration, this will add about
74 13k, but it can add much more depending on your configuration.
76 config CONFIG_FEATURE_COMPRESS_USAGE
77 bool "Store applet usage messages in compressed form"
79 depends on CONFIG_SHOW_USAGE && CONFIG_NITPICK
81 Store usage messages in compressed form, uncompress them on-the-fly
82 when <applet> --help is called.
84 If you have a really tiny busybox with few applets enabled (and
85 bunzip2 isn't one of them), the overhead of the decompressor might
86 be noticeable. Also, if you run executables directly from ROM
87 and have very little memory, this might not be a win. Otherwise,
88 you probably want this.
90 config CONFIG_FEATURE_INSTALLER
91 bool "Support --install [-s] to install applet links at runtime"
94 Enable 'busybox --install [-s]' support. This will allow you to use
95 busybox at runtime to create hard links or symlinks for all the
96 applets that are compiled into busybox. This feature requires the
99 config CONFIG_LOCALE_SUPPORT
100 bool "Enable locale support (system needs locale for this to work)"
103 Enable this if your system has locale support and you would like
104 busybox to support locale settings.
106 config CONFIG_GETOPT_LONG
109 # bool "Enable support for --long-options"
112 # Enable this if you want busybox applets to use the gnu --long-option
113 # style, in addition to single character -a -b -c style options.
115 config CONFIG_FEATURE_DEVPTS
116 bool "Use the devpts filesystem for Unix98 PTYs"
119 Enable if you want BusyBox to use Unix98 PTY support. If enabled,
120 busybox will use /dev/ptmx for the master side of the pseudoterminal
121 and /dev/pts/<number> for the slave side. Otherwise, BSD style
122 /dev/ttyp<number> will be used. To use this option, you should have
125 config CONFIG_FEATURE_CLEAN_UP
126 bool "Clean up all memory before exiting (usually not needed)"
128 depends on CONFIG_NITPICK
130 As a size optimization, busybox normally exits without explicitly
131 freeing dynamically allocated memory or closing files. This saves
132 space since the OS will clean up for us, but it can confuse debuggers
133 like valgrind, which report tons of memory and resource leaks.
135 Don't enable this unless you have a really good reason to clean
138 config CONFIG_FEATURE_SUID
139 bool "Support for SUID/SGID handling"
142 With this option you can install the busybox binary belonging
143 to root with the suid bit set, and it'll and it'll automatically drop
144 priviledges for applets that don't need root access.
146 If you're really paranoid and don't want to do this, build two
147 busybox binaries with different applets in them (and the appropriate
148 symlinks pointing to each binary), and only set the suid bit on the
149 one that needs it. The applets currently marked to need the suid bit
150 are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs,
153 config CONFIG_FEATURE_SUID_CONFIG
154 bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
155 default n if CONFIG_FEATURE_SUID
156 depends on CONFIG_FEATURE_SUID
158 Allow the SUID / SGID state of an applet to be determined at runtime
159 by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
160 The format of this file is as follows:
162 <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
164 An example might help:
167 su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
168 su = ssx # exactly the same
170 mount = sx- root.disk # applet mount can be run by root and members of group disk
171 # and runs with euid=0
173 cp = --- # disable applet cp for everyone
175 The file has to be owned by user root, group root and has to be
176 writeable only by root:
177 (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
178 The busybox executable has to be owned by user root, group
179 root and has to be setuid root for this to work:
180 (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
182 Robert 'sandman' Griebl has more information here:
183 <url: http://www.softforge.de/bb/suid.html >.
185 config CONFIG_FEATURE_SUID_CONFIG_QUIET
186 bool "Suppress warning message if /etc/busybox.conf is not readable"
188 depends on CONFIG_FEATURE_SUID_CONFIG
190 /etc/busybox.conf should be readable by the user needing the SUID, check
191 this option to avoid users to be notified about missing permissions.
193 config CONFIG_SELINUX
194 bool "Support NSA Security Enhanced Linux"
197 Enable support for SELinux in applets ls, ps, and id. Also provide
198 the option of compiling in SELinux applets.
200 If you do not have a complete SELinux userland installed, this stuff
201 will not compile. Go visit
202 http://www.nsa.gov/selinux/index.html
203 to download the necessary stuff to allow busybox to compile with
204 this option enabled. Specifially, libselinux 1.28 or better is
205 directly required by busybox. If the installation is located in a
206 non-standard directory, provide it by invoking make as follows:
207 CFLAGS=-I<libselinux-include-path> \
208 LDFLAGS=-L<libselinux-lib-path> \
211 Most people will leave this set to 'N'.
213 config CONFIG_BUSYBOX_EXEC_PATH
214 string "Path to BusyBox executable"
215 default "/proc/self/exe"
217 When Busybox applets need to run other busybox applets, BusyBox
218 sometimes needs to exec() itself. When the /proc filesystem is
219 mounted, /proc/self/exe always points to the currently running
220 executable. If you haven't got /proc, set this to wherever you
221 want to run BusyBox from.
228 bool "Build BusyBox as a static binary (no shared libs)"
231 If you want to build a static BusyBox binary, which does not
232 use or require any shared libraries, then enable this option.
233 This can cause BusyBox to be considerably larger, so you should
234 leave this option false unless you have a good reason (i.e.
235 your target platform does not support shared libraries, or
236 you are building an initrd which doesn't need anything but
239 Most people will leave this set to 'N'.
241 config CONFIG_BUILD_LIBBUSYBOX
242 bool "Build shared libbusybox"
245 Build a shared library libbusybox.so which contains all
246 libraries used inside busybox.
248 This is an experimental feature intended to support the upcoming
249 "make standalone" mode. Enabling it against the one big busybox
250 binary serves no purpose (and increases the size). You should
251 almost certainly say "no" to this right now.
253 config CONFIG_FEATURE_FULL_LIBBUSYBOX
254 bool "Feature-complete libbusybox"
255 default n if !CONFIG_FEATURE_SHARED_BUSYBOX
256 depends on CONFIG_BUILD_LIBBUSYBOX
258 Build a libbusybox with the complete feature-set, disregarding
259 the actually selected config.
261 Normally, libbusybox will only contain the features which are
262 used by busybox itself. If you plan to write a separate
263 standalone application which uses libbusybox say 'Y'.
265 Note: libbusybox is GPL, not LGPL, and exports no stable API that
266 might act as a copyright barrier. We can and will modify the
267 exported function set between releases (even minor version number
268 changes), and happily break out-of-tree features.
272 config CONFIG_FEATURE_SHARED_BUSYBOX
273 bool "Use shared libbusybox for busybox"
274 default y if CONFIG_BUILD_LIBBUSYBOX
275 depends on !CONFIG_STATIC && CONFIG_BUILD_LIBBUSYBOX
277 Use libbusybox.so also for busybox itself.
278 You need to have a working dynamic linker to use this variant.
281 bool "Build with Large File Support (for accessing files > 2 GB)"
283 select FDISK_SUPPORT_LARGE_DISKS
285 If you want to build BusyBox with large file support, then enable
286 this option. This will have no effect if your kernel or your C
287 library lacks large file support for large files. Some of the
288 programs that can benefit from large file support include dd, gzip,
289 cp, mount, tar, and many others. If you want to access files larger
290 than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
292 config CONFIG_BUILD_AT_ONCE
293 bool "Compile all sources at once"
296 Normally each source-file is compiled with one invocation of
298 If you set this option, all sources are compiled at once.
299 This gives the compiler more opportunities to optimize which can
300 result in smaller and/or faster binaries.
302 Setting this option will consume alot of memory, e.g. if you
303 enable all applets with all features, gcc uses more than 300MB
304 RAM during compilation of busybox.
306 This option is most likely only beneficial for newer compilers
307 such as gcc-4.1 and above.
309 Say 'N' unless you know what you are doing.
313 menu 'Debugging Options'
316 bool "Build BusyBox with extra Debugging symbols"
319 Say Y here if you wish to examine BusyBox internals while applets are
320 running. This increases the size of the binary considerably, and
321 should only be used when doing development. If you are doing
322 development and want to debug BusyBox, answer Y.
324 Most people should answer N.
326 config CONFIG_DEBUG_PESSIMIZE
327 bool "Disable compiler optimizations."
329 depends on CONFIG_DEBUG
331 The compiler's optimization of source code can eliminate and reorder
332 code, resulting in an executable that's hard to understand when
333 stepping through it with a debugger. This switches it off, resulting
334 in a much bigger executable that more closely matches the source
338 prompt "Additional debugging library"
339 default CONFIG_NO_DEBUG_LIB
340 depends on CONFIG_DEBUG
342 Using an additional debugging library will make BusyBox become
343 considerable larger and will cause it to run more slowly. You
344 should always leave this option disabled for production use.
348 This enables compiling with dmalloc ( http://dmalloc.com/ )
349 which is an excellent public domain mem leak and malloc problem
350 detector. To enable dmalloc, before running busybox you will
351 want to properly set your environment, for example:
352 export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
353 The 'debug=' value is generated using the following command
354 dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
355 -p check-fence -p check-heap -p check-lists -p check-blank \
356 -p check-funcs -p realloc-copy -p allow-free-null
358 Electric-fence support:
359 -----------------------
360 This enables compiling with Electric-fence support. Electric
361 fence is another very useful malloc debugging library which uses
362 your computer's virtual memory hardware to detect illegal memory
363 accesses. This support will make BusyBox be considerable larger
364 and run slower, so you should leave this option disabled unless
365 you are hunting a hard to find memory problem.
368 config CONFIG_NO_DEBUG_LIB
371 config CONFIG_DMALLOC
375 bool "Electric-fence"
379 config CONFIG_DEBUG_YANK_SUSv2
380 bool "Disable obsolete features removed before SUSv3?"
383 This option will disable backwards compatibility with SuSv2,
384 specifically, old-style numeric options ('command -1 <file>')
385 will not be supported in head, tail, and fold. (Note: should
386 yank from renice too.)
390 menu 'Installation Options'
392 config CONFIG_INSTALL_NO_USR
393 bool "Don't use /usr"
396 Disable use of /usr. Don't activate this option if you don't know
397 that you really want this behaviour.
400 prompt "Applets links"
401 default CONFIG_INSTALL_APPLET_SYMLINKS
403 Choose how you install applets links.
405 config CONFIG_INSTALL_APPLET_SYMLINKS
408 Install applets as soft-links to the busybox binary. This needs some
409 free inodes on the filesystem, but might help with filesystem
410 generators that can't cope with hard-links.
412 config CONFIG_INSTALL_APPLET_HARDLINKS
415 Install applets as hard-links to the busybox binary. This might count
416 on a filesystem with few inodes.
418 config CONFIG_INSTALL_APPLET_DONT
420 prompt "not installed"
421 depends on CONFIG_FEATURE_INSTALLER || CONFIG_FEATURE_SH_STANDALONE_SHELL
423 Do not install applets links. Usefull when using the -install feature
424 or a standalone shell for rescue pruposes.
429 string "BusyBox installation prefix"
432 Define your directory to install BusyBox files/subdirs in.
436 source libbb/Config.in
442 source archival/Config.in
443 source coreutils/Config.in
444 source console-tools/Config.in
445 source debianutils/Config.in
446 source editors/Config.in
447 source findutils/Config.in
448 source init/Config.in
449 source loginutils/Config.in
450 source e2fsprogs/Config.in
451 source modutils/Config.in
452 source util-linux/Config.in
453 source miscutils/Config.in
454 source networking/Config.in
455 source procps/Config.in
456 source shell/Config.in
457 source sysklogd/Config.in