5 Changes between 0.9.3a and 0.9.4
7 *) More DES library cleanups: remove references to srand/rand and
11 *) Add support for the the free Netwide assembler (NASM) under Win32,
12 since not many people have MASM (ml) and it can be hard to obtain.
13 This is currently experimental but it seems to work OK and pass all
14 the tests. Check out INSTALL.W32 for info.
17 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
18 without temporary keys kept an extra copy of the server key,
19 and connections with temporary keys did not free everything in case
23 *) New function RSA_check_key and new openssl rsa option -check
24 for verifying the consistency of RSA keys.
25 [Ulf Moeller, Bodo Moeller]
27 *) Various changes to make Win32 compile work:
28 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
29 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
31 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
34 *) Add a debugging option to PKCS#5 v2 key generation function: when
35 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
36 derived keys are printed to stderr.
39 *) Copy the flags in ASN1_STRING_dup().
40 [Roman E. Pavlov <pre@mo.msk.ru>]
42 *) The x509 application mishandled signing requests containing DSA
43 keys when the signing key was also DSA and the parameters didn't match.
45 It was supposed to omit the parameters when they matched the signing key:
46 the verifying software was then supposed to automatically use the CA's
47 parameters if they were absent from the end user certificate.
49 Omitting parameters is no longer recommended. The test was also
50 the wrong way round! This was probably due to unusual behaviour in
51 EVP_cmp_parameters() which returns 1 if the parameters match.
52 This meant that parameters were omitted when they *didn't* match and
53 the certificate was useless. Certificates signed with 'ca' didn't have
55 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
57 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
58 The interface is as follows:
60 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
61 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
62 "off" is now the default.
63 The library internally uses
64 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
65 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
66 to disable memory-checking temporarily.
68 Some inconsistent states that previously were possible (and were
69 even the default) are now avoided.
71 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
72 with each memory chunk allocated; this is occasionally more helpful
73 than just having a counter.
75 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
77 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
81 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
82 which largely parallels "options", but is for changing API behaviour,
83 whereas "options" are about protocol behaviour.
84 Initial "mode" flags are:
86 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
87 a single record has been written.
88 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
89 retries use the same buffer location.
90 (But all of the contents must be
94 *) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
97 *) Fix problems with no-hmac etc.
98 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
100 *) New functions RSA_get_default_method(), RSA_set_method() and
101 RSA_get_method(). These allows replacement of RSA_METHODs without having
102 to mess around with the internals of an RSA structure.
105 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
106 Also really enable memory leak checks in openssl.c and in some
108 [Chad C. Mulligan, Bodo Moeller]
110 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
111 up the length of negative integers. This has now been simplified to just
112 store the length when it is first determined and use it later, rather
113 than trying to keep track of where data is copied and updating it to
115 [Steve Henson, reported by Brien Wheeler
116 <bwheeler@authentica-security.com>]
118 *) Add a new function PKCS7_signatureVerify. This allows the verification
119 of a PKCS#7 signature but with the signing certificate passed to the
120 function itself. This contrasts with PKCS7_dataVerify which assumes the
121 certificate is present in the PKCS#7 structure. This isn't always the
122 case: certificates can be omitted from a PKCS#7 structure and be
123 distributed by "out of band" means (such as a certificate database).
126 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
127 function prototypes in pem.h, also change util/mkdef.pl to add the
128 necessary function names.
131 *) mk1mf.pl (used by Windows builds) did not properly read the
132 options set by Configure in the top level Makefile, and Configure
133 was not even able to write more than one option correctly.
134 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
137 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
138 file to be loaded from a BIO or FILE pointer. The BIO version will
139 for example allow memory BIOs to contain config info.
142 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
143 Whoever hopes to achieve shared-library compatibility across versions
144 must use this, not the compile-time macro.
145 (Exercise 0.9.4: Which is the minimum library version required by
147 Note: All this applies only to multi-threaded programs, others don't
151 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
152 through a BIO pair triggered the default case, i.e.
153 SSLerr(...,SSL_R_UNKNOWN_STATE).
156 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
157 can use the SSL library even if none of the specific BIOs is
161 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
162 for the encoded length.
163 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
165 *) Add initial documentation of the X509V3 functions.
168 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
169 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
170 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
171 secure PKCS#8 private key format with a high iteration count.
174 *) Fix determination of Perl interpreter: A perl or perl5
175 _directory_ in $PATH was also accepted as the interpreter.
176 [Ralf S. Engelschall]
178 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
179 wrong with it but it was very old and did things like calling
180 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
184 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
185 to use the new extension code.
188 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
189 with macros. This should make it easier to change their form, add extra
190 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
194 *) Add to configuration table a new entry that can specify an alternative
195 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
196 according to Mark Crispin <MRC@Panda.COM>.
200 *) DES CBC did not update the IV. Weird.
203 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
204 Changing the behaviour of the former might break existing programs --
205 where IV updating is needed, des_ncbc_encrypt can be used.
208 *) When bntest is run from "make test" it drives bc to check its
209 calculations, as well as internally checking them. If an internal check
210 fails, it needs to cause bc to give a non-zero result or make test carries
211 on without noticing the failure. Fixed.
214 *) DES library cleanups.
217 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
218 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
219 ciphers. NOTE: although the key derivation function has been verified
220 against some published test vectors it has not been extensively tested
221 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
225 *) Instead of "mkdir -p", which is not fully portable, use new
226 Perl script "util/mkdir-p.pl".
229 *) Rewrite the way password based encryption (PBE) is handled. It used to
230 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
231 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
232 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
233 the 'parameter' field of the AlgorithmIdentifier is passed to the
234 underlying key generation function so it must do its own ASN1 parsing.
235 This has also changed the EVP_PBE_CipherInit() function which now has a
236 'parameter' argument instead of literal salt and iteration count values
237 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
240 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
241 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
242 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
243 KEY" because this clashed with PKCS#8 unencrypted string. Since this
244 value was just used as a "magic string" and not used directly its
245 value doesn't matter.
248 *) Introduce some semblance of const correctness to BN. Shame C doesn't
252 *) "linux-sparc64" configuration (ultrapenguin).
253 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
254 "linux-sparc" configuration.
255 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
257 *) config now generates no-xxx options for missing ciphers.
260 *) Support the EBCDIC character set (work in progress).
261 File ebcdic.c not yet included because it has a different license.
262 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
264 *) Support BS2000/OSD-POSIX.
265 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
267 *) Make callbacks for key generation use void * instead of char *.
270 *) Make S/MIME samples compile (not yet tested).
273 *) Additional typesafe stacks.
276 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
280 Changes between 0.9.3 and 0.9.3a [29 May 1999]
282 *) New configuration variant "sco5-gcc".
284 *) Updated some demos.
285 [Sean O Riordain, Wade Scholine]
287 *) Add missing BIO_free at exit of pkcs12 application.
290 *) Fix memory leak in conf.c.
293 *) Updates for Win32 to assembler version of MD5.
296 *) Set #! path to perl in apps/der_chop to where we found it
297 instead of using a fixed path.
300 *) SHA library changes for irix64-mips4-cc.
303 *) Improvements for VMS support.
307 Changes between 0.9.2b and 0.9.3 [24 May 1999]
309 *) Bignum library bug fix. IRIX 6 passes "make test" now!
310 This also avoids the problems with SC4.2 and unpatched SC5.
311 [Andy Polyakov <appro@fy.chalmers.se>]
313 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
314 These are required because of the typesafe stack would otherwise break
315 existing code. If old code used a structure member which used to be STACK
316 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
317 sk_num or sk_value it would produce an error because the num, data members
318 are not present in STACK_OF. Now it just produces a warning. sk_set
319 replaces the old method of assigning a value to sk_value
320 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
321 that does this will no longer work (and should use sk_set instead) but
322 this could be regarded as a "questionable" behaviour anyway.
325 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
326 correctly handle encrypted S/MIME data.
329 *) Change type of various DES function arguments from des_cblock
330 (which means, in function argument declarations, pointer to char)
331 to des_cblock * (meaning pointer to array with 8 char elements),
332 which allows the compiler to do more typechecking; it was like
333 that back in SSLeay, but with lots of ugly casts.
335 Introduce new type const_des_cblock.
338 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
339 problems: find RecipientInfo structure that matches recipient certificate
340 and initialise the ASN1 structures properly based on passed cipher.
343 *) Belatedly make the BN tests actually check the results.
346 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
347 to and from BNs: it was completely broken. New compilation option
348 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
349 key elements as negative integers.
352 *) Reorganize and speed up MD5.
353 [Andy Polyakov <appro@fy.chalmers.se>]
356 [Richard Levitte <richard@levitte.org>]
358 *) New option -out to asn1parse to allow the parsed structure to be
359 output to a file. This is most useful when combined with the -strparse
360 option to examine the output of things like OCTET STRINGS.
363 *) Make SSL library a little more fool-proof by not requiring any longer
364 that SSL_set_{accept,connect}_state be called before
365 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
366 in many applications because usually everything *appeared* to work as
367 intended anyway -- now it really works as intended).
370 *) Move openssl.cnf out of lib/.
373 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
374 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
375 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
376 [Ralf S. Engelschall]
378 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
379 handle PKCS#7 enveloped data properly.
380 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
382 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
383 copying pointers. The cert_st handling is changed by this in
384 various ways (and thus what used to be known as ctx->default_cert
385 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
386 any longer when s->cert does not give us what we need).
387 ssl_cert_instantiate becomes obsolete by this change.
388 As soon as we've got the new code right (possibly it already is?),
389 we have solved a couple of bugs of the earlier code where s->cert
390 was used as if it could not have been shared with other SSL structures.
392 Note that using the SSL API in certain dirty ways now will result
393 in different behaviour than observed with earlier library versions:
394 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
395 does not influence s as it used to.
397 In order to clean up things more thoroughly, inside SSL_SESSION
398 we don't use CERT any longer, but a new structure SESS_CERT
399 that holds per-session data (if available); currently, this is
400 the peer's certificate chain and, for clients, the server's certificate
401 and temporary key. CERT holds only those values that can have
402 meaningful defaults in an SSL_CTX.
405 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
406 from the internal representation. Various PKCS#7 fixes: remove some
407 evil casts and set the enc_dig_alg field properly based on the signing
411 *) Allow PKCS#12 password to be set from the command line or the
412 environment. Let 'ca' get its config file name from the environment
413 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
417 *) Allow certificate policies extension to use an IA5STRING for the
418 organization field. This is contrary to the PKIX definition but
419 VeriSign uses it and IE5 only recognises this form. Document 'x509'
423 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
424 without disallowing inline assembler and the like for non-pedantic builds.
427 *) Support Borland C++ builder.
428 [Janez Jere <jj@void.si>, modified by Ulf Möller]
433 *) SHA-1 cleanups and performance enhancements.
434 [Andy Polyakov <appro@fy.chalmers.se>]
436 *) Sparc v8plus assembler for the bignum library.
437 [Andy Polyakov <appro@fy.chalmers.se>]
439 *) Accept any -xxx and +xxx compiler options in Configure.
442 *) Update HPUX configuration.
445 *) Add missing sk_<type>_unshift() function to safestack.h
446 [Ralf S. Engelschall]
448 *) New function SSL_CTX_use_certificate_chain_file that sets the
449 "extra_cert"s in addition to the certificate. (This makes sense
450 only for "PEM" format files, as chains as a whole are not
454 *) Support verify_depth from the SSL API.
455 x509_vfy.c had what can be considered an off-by-one-error:
456 Its depth (which was not part of the external interface)
457 was actually counting the number of certificates in a chain;
458 now it really counts the depth.
461 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
462 instead of X509err, which often resulted in confusing error
463 messages since the error codes are not globally unique
464 (e.g. an alleged error in ssl3_accept when a certificate
465 didn't match the private key).
467 *) New function SSL_CTX_set_session_id_context that allows to set a default
468 value (so that you don't need SSL_set_session_id_context for each
469 connection using the SSL_CTX).
472 *) OAEP decoding bug fix.
475 *) Support INSTALL_PREFIX for package builders, as proposed by
479 *) New Configure options "threads" and "no-threads". For systems
480 where the proper compiler options are known (currently Solaris
481 and Linux), "threads" is the default.
484 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
487 *) Install various scripts to $(OPENSSLDIR)/misc, not to
488 $(INSTALLTOP)/bin -- they shouldn't clutter directories
489 such as /usr/local/bin.
492 *) "make linux-shared" to build shared libraries.
493 [Niels Poppe <niels@netbox.org>]
495 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
498 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
499 extension adding in x509 utility.
502 *) Remove NOPROTO sections and error code comments.
505 *) Partial rewrite of the DEF file generator to now parse the ANSI
509 *) New Configure options --prefix=DIR and --openssldir=DIR.
512 *) Complete rewrite of the error code script(s). It is all now handled
513 by one script at the top level which handles error code gathering,
514 header rewriting and C source file generation. It should be much better
515 than the old method: it now uses a modified version of Ulf's parser to
516 read the ANSI prototypes in all header files (thus the old K&R definitions
517 aren't needed for error creation any more) and do a better job of
518 translating function codes into names. The old 'ASN1 error code imbedded
519 in a comment' is no longer necessary and it doesn't use .err files which
520 have now been deleted. Also the error code call doesn't have to appear all
521 on one line (which resulted in some large lines...).
524 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
527 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
528 0 (which usually indicates a closed connection), but continue reading.
531 *) Fix some race conditions.
534 *) Add support for CRL distribution points extension. Add Certificate
535 Policies and CRL distribution points documentation.
538 *) Move the autogenerated header file parts to crypto/opensslconf.h.
541 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
542 8 of keying material. Merlin has also confirmed interop with this fix
543 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
544 [Merlin Hughes <merlin@baltimore.ie>]
546 *) Fix lots of warnings.
547 [Richard Levitte <levitte@stacken.kth.se>]
549 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
550 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
551 [Richard Levitte <levitte@stacken.kth.se>]
553 *) Fix problems with sizeof(long) == 8.
554 [Andy Polyakov <appro@fy.chalmers.se>]
556 *) Change functions to ANSI C.
559 *) Fix typos in error codes.
560 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
562 *) Remove defunct assembler files from Configure.
565 *) SPARC v8 assembler BIGNUM implementation.
566 [Andy Polyakov <appro@fy.chalmers.se>]
568 *) Support for Certificate Policies extension: both print and set.
569 Various additions to support the r2i method this uses.
572 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
573 return a const string when you are expecting an allocated buffer.
576 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
577 types DirectoryString and DisplayText.
580 *) Add code to allow r2i extensions to access the configuration database,
581 add an LHASH database driver and add several ctx helper functions.
584 *) Fix an evil bug in bn_expand2() which caused various BN functions to
585 fail when they extended the size of a BIGNUM.
588 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
589 support typesafe stack.
592 *) Fix typo in SSL_[gs]et_options().
593 [Nils Frostberg <nils@medcom.se>]
595 *) Delete various functions and files that belonged to the (now obsolete)
596 old X509V3 handling code.
599 *) New Configure option "rsaref".
602 *) Don't auto-generate pem.h.
605 *) Introduce type-safe ASN.1 SETs.
608 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
609 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
611 *) Introduce type-safe STACKs. This will almost certainly break lots of code
612 that links with OpenSSL (well at least cause lots of warnings), but fear
613 not: the conversion is trivial, and it eliminates loads of evil casts. A
614 few STACKed things have been converted already. Feel free to convert more.
615 In the fullness of time, I'll do away with the STACK type altogether.
618 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
619 specified in <certfile> by updating the entry in the index.txt file.
620 This way one no longer has to edit the index.txt file manually for
621 revoking a certificate. The -revoke option does the gory details now.
622 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
624 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
625 `-text' option at all and this way the `-noout -text' combination was
626 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
627 [Ralf S. Engelschall]
629 *) Make sure a corresponding plain text error message exists for the
630 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
631 verify callback function determined that a certificate was revoked.
632 [Ralf S. Engelschall]
634 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
635 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
636 all available cipers including rc5, which was forgotten until now.
637 In order to let the testing shell script know which algorithms
638 are available, a new (up to now undocumented) command
639 "openssl list-cipher-commands" is used.
642 *) Bugfix: s_client occasionally would sleep in select() when
643 it should have checked SSL_pending() first.
646 *) New functions DSA_do_sign and DSA_do_verify to provide access to
647 the raw DSA values prior to ASN.1 encoding.
650 *) Tweaks to Configure
651 [Niels Poppe <niels@netbox.org>]
653 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
657 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
660 *) New config option to avoid instructions that are illegal on the 80386.
661 The default code is faster, but requires at least a 486.
664 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
665 SSL2_SERVER_VERSION (not used at all) macros, which are now the
666 same as SSL2_VERSION anyway.
669 *) New "-showcerts" option for s_client.
672 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
673 application. Various cleanups and fixes.
676 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
677 modify error routines to work internally. Add error codes and PBE init
678 to library startup routines.
681 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
682 packing functions to asn1 and evp. Changed function names and error
686 *) PKCS12 integration: and so it begins... First of several patches to
687 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
691 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
692 and display support for Thawte strong extranet extension.
695 *) Add LinuxPPC support.
696 [Jeff Dubrule <igor@pobox.org>]
698 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
699 bn_div_words in alpha.s.
700 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
702 *) Make sure the RSA OAEP test is skipped under -DRSAref because
703 OAEP isn't supported when OpenSSL is built with RSAref.
704 [Ulf Moeller <ulf@fitug.de>]
706 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
707 so they no longer are missing under -DNOPROTO.
708 [Soren S. Jorvang <soren@t.dk>]
711 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
713 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
714 doesn't work when the session is reused. Coming soon!
717 *) Fix a security hole, that allows sessions to be reused in the wrong
718 context thus bypassing client cert protection! All software that uses
719 client certs and session caches in multiple contexts NEEDS PATCHING to
720 allow session reuse! A fuller solution is in the works.
721 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
723 *) Some more source tree cleanups (removed obsolete files
724 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
725 permission on "config" script to be executable) and a fix for the INSTALL
727 [Ulf Moeller <ulf@fitug.de>]
729 *) Remove some legacy and erroneous uses of malloc, free instead of
731 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
733 *) Make rsa_oaep_test return non-zero on error.
734 [Ulf Moeller <ulf@fitug.de>]
736 *) Add support for native Solaris shared libraries. Configure
737 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
738 if someone would make that last step automatic.
739 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
741 *) ctx_size was not built with the right compiler during "make links". Fixed.
744 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
745 except NULL ciphers". This means the default cipher list will no longer
746 enable NULL ciphers. They need to be specifically enabled e.g. with
747 the string "DEFAULT:eNULL".
750 *) Fix to RSA private encryption routines: if p < q then it would
751 occasionally produce an invalid result. This will only happen with
752 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
755 *) Be less restrictive and allow also `perl util/perlpath.pl
756 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
757 because this way one can also use an interpreter named `perl5' (which is
758 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
759 installed as `perl').
760 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
762 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
763 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
765 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
766 advapi32.lib to Win32 build and change the pem test comparision
767 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
768 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
769 and crypto/des/ede_cbcm_enc.c.
772 *) DES quad checksum was broken on big-endian architectures. Fixed.
775 *) Comment out two functions in bio.h that aren't implemented. Fix up the
776 Win32 test batch file so it (might) work again. The Win32 test batch file
777 is horrible: I feel ill....
780 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
781 in e_os.h. Audit of header files to check ANSI and non ANSI
782 sections: 10 functions were absent from non ANSI section and not exported
783 from Windows DLLs. Fixed up libeay.num for new functions.
786 *) Make `openssl version' output lines consistent.
787 [Ralf S. Engelschall]
789 *) Fix Win32 symbol export lists for BIO functions: Added
790 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
791 to ms/libeay{16,32}.def.
792 [Ralf S. Engelschall]
794 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
795 fine under Unix and passes some trivial tests I've now added. But the
796 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
797 added to make sure no one expects that this stuff really works in the
798 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
799 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
801 [Ralf S. Engelschall]
803 *) Fix the generation of two part addresses in perl.
804 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
806 *) Add config entry for Linux on MIPS.
807 [John Tobey <jtobey@channel1.com>]
809 *) Make links whenever Configure is run, unless we are on Windoze.
812 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
813 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
817 *) Add a useful kludge to allow package maintainers to specify compiler and
818 other platforms details on the command line without having to patch the
819 Configure script everytime: One now can use ``perl Configure
820 <id>:<details>'', i.e. platform ids are allowed to have details appended
821 to them (seperated by colons). This is treated as there would be a static
822 pre-configured entry in Configure's %table under key <id> with value
823 <details> and ``perl Configure <id>'' is called. So, when you want to
824 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
825 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
826 now, which overrides the FreeBSD-elf entry on-the-fly.
827 [Ralf S. Engelschall]
829 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
832 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
833 on the `perl Configure ...' command line. This way one can compile
834 OpenSSL libraries with Position Independent Code (PIC) which is needed
835 for linking it into DSOs.
836 [Ralf S. Engelschall]
838 *) Remarkably, export ciphers were totally broken and no-one had noticed!
842 *) Cleaned up the LICENSE document: The official contact for any license
843 questions now is the OpenSSL core team under openssl-core@openssl.org.
844 And add a paragraph about the dual-license situation to make sure people
845 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
846 to the OpenSSL toolkit.
847 [Ralf S. Engelschall]
849 *) General source tree makefile cleanups: Made `making xxx in yyy...'
850 display consistent in the source tree and replaced `/bin/rm' by `rm'.
851 Additonally cleaned up the `make links' target: Remove unnecessary
852 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
853 to speed processing and no longer clutter the display with confusing
854 stuff. Instead only the actually done links are displayed.
855 [Ralf S. Engelschall]
857 *) Permit null encryption ciphersuites, used for authentication only. It used
858 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
859 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
863 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
864 signed attributes when verifying signatures (this would break them),
865 the detached data encoding was wrong and public keys obtained using
866 X509_get_pubkey() weren't freed.
869 *) Add text documentation for the BUFFER functions. Also added a work around
870 to a Win95 console bug. This was triggered by the password read stuff: the
871 last character typed gets carried over to the next fread(). If you were
872 generating a new cert request using 'req' for example then the last
873 character of the passphrase would be CR which would then enter the first
877 *) Added the new `Includes OpenSSL Cryptography Software' button as
878 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
879 button and can be used by applications based on OpenSSL to show the
880 relationship to the OpenSSL project.
881 [Ralf S. Engelschall]
883 *) Remove confusing variables in function signatures in files
884 ssl/ssl_lib.c and ssl/ssl.h.
885 [Lennart Bong <lob@kulthea.stacken.kth.se>]
887 *) Don't install bss_file.c under PREFIX/include/
888 [Lennart Bong <lob@kulthea.stacken.kth.se>]
890 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
891 functions that return function pointers and has support for NT specific
892 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
893 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
894 unsigned to signed types: this was killing the Win32 compile.
897 *) Add new certificate file to stack functions,
898 SSL_add_dir_cert_subjects_to_stack() and
899 SSL_add_file_cert_subjects_to_stack(). These largely supplant
900 SSL_load_client_CA_file(), and can be used to add multiple certs easily
901 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
902 This means that Apache-SSL and similar packages don't have to mess around
903 to add as many CAs as they want to the preferred list.
906 *) Experiment with doxygen documentation. Currently only partially applied to
908 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
909 openssl.doxy as the configuration file.
912 *) Get rid of remaining C++-style comments which strict C compilers hate.
913 [Ralf S. Engelschall, pointed out by Carlos Amengual]
915 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
916 compiled in by default: it has problems with large keys.
919 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
920 DH private keys and/or callback functions which directly correspond to
921 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
922 is needed for applications which have to configure certificates on a
923 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
925 For the RSA certificate situation is makes no difference, but
926 for the DSA certificate situation this fixes the "no shared cipher"
927 problem where the OpenSSL cipher selection procedure failed because the
928 temporary keys were not overtaken from the context and the API provided
929 no way to reconfigure them.
930 The new functions now let applications reconfigure the stuff and they
931 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
932 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
933 non-public-API function ssl_cert_instantiate() is used as a helper
934 function and also to reduce code redundancy inside ssl_rsa.c.
935 [Ralf S. Engelschall]
937 *) Move s_server -dcert and -dkey options out of the undocumented feature
938 area because they are useful for the DSA situation and should be
939 recognized by the users.
940 [Ralf S. Engelschall]
942 *) Fix the cipher decision scheme for export ciphers: the export bits are
943 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
944 SSL_EXP_MASK. So, the original variable has to be used instead of the
945 already masked variable.
946 [Richard Levitte <levitte@stacken.kth.se>]
948 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
949 [Richard Levitte <levitte@stacken.kth.se>]
951 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
952 from `int' to `unsigned int' because it's a length and initialized by
953 EVP_DigestFinal() which expects an `unsigned int *'.
954 [Richard Levitte <levitte@stacken.kth.se>]
956 *) Don't hard-code path to Perl interpreter on shebang line of Configure
957 script. Instead use the usual Shell->Perl transition trick.
958 [Ralf S. Engelschall]
960 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
961 (in addition to RSA certificates) to match the behaviour of `openssl dsa
962 -noout -modulus' as it's already the case for `openssl rsa -noout
963 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
964 currently the public key is printed (a decision which was already done by
965 `openssl dsa -modulus' in the past) which serves a similar purpose.
966 Additionally the NO_RSA no longer completely removes the whole -modulus
967 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
969 [Ralf S. Engelschall]
971 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
972 BIO. See the source (crypto/evp/bio_ok.c) for more info.
973 [Arne Ansper <arne@ats.cyber.ee>]
975 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
976 to be added. Now both 'req' and 'ca' can use new objects defined in the
980 *) Add cool BIO that does syslog (or event log on NT).
981 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
983 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
984 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
985 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
986 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
989 *) Add preliminary config info for new extension code.
992 *) Make RSA_NO_PADDING really use no padding.
993 [Ulf Moeller <ulf@fitug.de>]
995 *) Generate errors when private/public key check is done.
998 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
999 for some CRL extensions and new objects added.
1002 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
1003 key usage extension and fuller support for authority key id.
1006 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
1007 padding method for RSA, which is recommended for new applications in PKCS
1008 #1 v2.0 (RFC 2437, October 1998).
1009 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
1010 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
1011 against Bleichbacher's attack on RSA.
1012 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
1015 *) Updates to the new SSL compression code
1016 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1018 *) Fix so that the version number in the master secret, when passed
1019 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
1020 (because the server will not accept higher), that the version number
1021 is 0x03,0x01, not 0x03,0x00
1022 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1024 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
1025 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
1026 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
1029 *) Support for RAW extensions where an arbitrary extension can be
1030 created by including its DER encoding. See apps/openssl.cnf for
1034 *) Make sure latest Perl versions don't interpret some generated C array
1035 code as Perl array code in the crypto/err/err_genc.pl script.
1036 [Lars Weber <3weber@informatik.uni-hamburg.de>]
1038 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
1039 not many people have the assembler. Various Win32 compilation fixes and
1040 update to the INSTALL.W32 file with (hopefully) more accurate Win32
1044 *) Modify configure script 'Configure' to automatically create crypto/date.h
1045 file under Win32 and also build pem.h from pem.org. New script
1046 util/mkfiles.pl to create the MINFO file on environments that can't do a
1047 'make files': perl util/mkfiles.pl >MINFO should work.
1050 *) Major rework of DES function declarations, in the pursuit of correctness
1051 and purity. As a result, many evil casts evaporated, and some weirdness,
1052 too. You may find this causes warnings in your code. Zapping your evil
1053 casts will probably fix them. Mostly.
1056 *) Fix for a typo in asn1.h. Bug fix to object creation script
1057 obj_dat.pl. It considered a zero in an object definition to mean
1058 "end of object": none of the objects in objects.h have any zeros
1059 so it wasn't spotted.
1060 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
1062 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
1063 Masking (CBCM). In the absence of test vectors, the best I have been able
1064 to do is check that the decrypt undoes the encrypt, so far. Send me test
1065 vectors if you have them.
1068 *) Correct calculation of key length for export ciphers (too much space was
1069 allocated for null ciphers). This has not been tested!
1072 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
1073 message is now correct (it understands "crypto" and "ssl" on its
1074 command line). There is also now an "update" option. This will update
1075 the util/ssleay.num and util/libeay.num files with any new functions.
1077 perl util/mkdef.pl crypto ssl update
1078 it will update them.
1081 *) Overhauled the Perl interface (perl/*):
1082 - ported BN stuff to OpenSSL's different BN library
1083 - made the perl/ source tree CVS-aware
1084 - renamed the package from SSLeay to OpenSSL (the files still contain
1085 their history because I've copied them in the repository)
1086 - removed obsolete files (the test scripts will be replaced
1087 by better Test::Harness variants in the future)
1088 [Ralf S. Engelschall]
1090 *) First cut for a very conservative source tree cleanup:
1091 1. merge various obsolete readme texts into doc/ssleay.txt
1092 where we collect the old documents and readme texts.
1093 2. remove the first part of files where I'm already sure that we no
1094 longer need them because of three reasons: either they are just temporary
1095 files which were left by Eric or they are preserved original files where
1096 I've verified that the diff is also available in the CVS via "cvs diff
1097 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
1098 the crypto/md/ stuff).
1099 [Ralf S. Engelschall]
1101 *) More extension code. Incomplete support for subject and issuer alt
1102 name, issuer and authority key id. Change the i2v function parameters
1103 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
1104 what that's for :-) Fix to ASN1 macro which messed up
1105 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
1108 *) Preliminary support for ENUMERATED type. This is largely copied from the
1112 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
1113 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1115 *) Make sure `make rehash' target really finds the `openssl' program.
1116 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1118 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
1119 like to hear about it if this slows down other processors.
1122 *) Add CygWin32 platform information to Configure script.
1123 [Alan Batie <batie@aahz.jf.intel.com>]
1125 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
1126 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
1128 *) New program nseq to manipulate netscape certificate sequences
1131 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
1135 *) Fixes to BN code. Previously the default was to define BN_RECURSION
1136 but the BN code had some problems that would cause failures when
1137 doing certificate verification and some other functions.
1138 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1140 *) Add ASN1 and PEM code to support netscape certificate sequences.
1143 *) Add ASN1 and PEM code to support netscape certificate sequences.
1146 *) Add several PKIX and private extended key usage OIDs.
1149 *) Modify the 'ca' program to handle the new extension code. Modify
1150 openssl.cnf for new extension format, add comments.
1153 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
1154 and add a sample to openssl.cnf so req -x509 now adds appropriate
1158 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
1159 error code, add initial support to X509_print() and x509 application.
1162 *) Takes a deep breath and start addding X509 V3 extension support code. Add
1163 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
1164 stuff is currently isolated and isn't even compiled yet.
1167 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
1168 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
1169 Removed the versions check from X509 routines when loading extensions:
1170 this allows certain broken certificates that don't set the version
1171 properly to be processed.
1174 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
1175 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
1176 can still be regenerated with "make depend".
1179 *) Spelling mistake in C version of CAST-128.
1180 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
1182 *) Changes to the error generation code. The perl script err-code.pl
1183 now reads in the old error codes and retains the old numbers, only
1184 adding new ones if necessary. It also only changes the .err files if new
1185 codes are added. The makefiles have been modified to only insert errors
1186 when needed (to avoid needlessly modifying header files). This is done
1187 by only inserting errors if the .err file is newer than the auto generated
1188 C file. To rebuild all the error codes from scratch (the old behaviour)
1189 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
1190 or delete all the .err files.
1193 *) CAST-128 was incorrectly implemented for short keys. The C version has
1194 been fixed, but is untested. The assembler versions are also fixed, but
1195 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
1196 to regenerate it if needed.
1197 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
1198 Hagino <itojun@kame.net>]
1200 *) File was opened incorrectly in randfile.c.
1201 [Ulf Möller <ulf@fitug.de>]
1203 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
1204 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
1205 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
1206 al: it's just almost always a UTCTime. Note this patch adds new error
1207 codes so do a "make errors" if there are problems.
1210 *) Correct Linux 1 recognition in config.
1211 [Ulf Möller <ulf@fitug.de>]
1213 *) Remove pointless MD5 hash when using DSA keys in ca.
1214 [Anonymous <nobody@replay.com>]
1216 *) Generate an error if given an empty string as a cert directory. Also
1217 generate an error if handed NULL (previously returned 0 to indicate an
1218 error, but didn't set one).
1219 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
1221 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
1224 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
1225 parameters. This was causing a warning which killed off the Win32 compile.
1228 *) Remove C++ style comments from crypto/bn/bn_local.h.
1229 [Neil Costigan <neil.costigan@celocom.com>]
1231 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
1232 based on a text string, looking up short and long names and finally
1233 "dot" format. The "dot" format stuff didn't work. Added new function
1234 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
1235 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
1236 OID is not part of the table.
1239 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
1240 X509_LOOKUP_by_alias().
1243 *) Sort openssl functions by name.
1246 *) Get the gendsa program working (hopefully) and add it to app list. Remove
1247 encryption from sample DSA keys (in case anyone is interested the password
1251 *) Make _all_ *_free functions accept a NULL pointer.
1252 [Frans Heymans <fheymans@isaserver.be>]
1254 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
1256 [Anonymous <nobody@replay.com>]
1258 *) s_server should send the CAfile as acceptable CAs, not its own cert.
1259 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1261 *) Don't blow it for numeric -newkey arguments to apps/req.
1262 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1264 *) Temp key "for export" tests were wrong in s3_srvr.c.
1265 [Anonymous <nobody@replay.com>]
1267 *) Add prototype for temp key callback functions
1268 SSL_CTX_set_tmp_{rsa,dh}_callback().
1271 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
1272 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
1275 *) X509_name_add_entry() freed the wrong thing after an error.
1276 [Arne Ansper <arne@ats.cyber.ee>]
1278 *) rsa_eay.c would attempt to free a NULL context.
1279 [Arne Ansper <arne@ats.cyber.ee>]
1281 *) BIO_s_socket() had a broken should_retry() on Windoze.
1282 [Arne Ansper <arne@ats.cyber.ee>]
1284 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
1285 [Arne Ansper <arne@ats.cyber.ee>]
1287 *) Make sure the already existing X509_STORE->depth variable is initialized
1288 in X509_STORE_new(), but document the fact that this variable is still
1289 unused in the certificate verification process.
1290 [Ralf S. Engelschall]
1292 *) Fix the various library and apps files to free up pkeys obtained from
1293 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
1296 *) Fix reference counting in X509_PUBKEY_get(). This makes
1297 demos/maurice/example2.c work, amongst others, probably.
1298 [Steve Henson and Ben Laurie]
1300 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
1301 `openssl' and second, the shortcut symlinks for the `openssl <command>'
1302 are no longer created. This way we have a single and consistent command
1303 line interface `openssl <command>', similar to `cvs <command>'.
1304 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
1306 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
1307 BIT STRING wrapper always have zero unused bits.
1310 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
1313 *) Make the top-level INSTALL documentation easier to understand.
1316 *) Makefiles updated to exit if an error occurs in a sub-directory
1317 make (including if user presses ^C) [Paul Sutton]
1319 *) Make Montgomery context stuff explicit in RSA data structure.
1322 *) Fix build order of pem and err to allow for generated pem.h.
1325 *) Fix renumbering bug in X509_NAME_delete_entry().
1328 *) Enhanced the err-ins.pl script so it makes the error library number
1329 global and can add a library name. This is needed for external ASN1 and
1330 other error libraries.
1333 *) Fixed sk_insert which never worked properly.
1336 *) Fix ASN1 macros so they can handle indefinite length construted
1337 EXPLICIT tags. Some non standard certificates use these: they can now
1341 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
1342 into a single doc/ssleay.txt bundle. This way the information is still
1343 preserved but no longer messes up this directory. Now it's new room for
1344 the new set of documenation files.
1345 [Ralf S. Engelschall]
1347 *) SETs were incorrectly DER encoded. This was a major pain, because they
1348 shared code with SEQUENCEs, which aren't coded the same. This means that
1349 almost everything to do with SETs or SEQUENCEs has either changed name or
1350 number of arguments.
1351 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
1353 *) Fix test data to work with the above.
1356 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
1357 was already fixed by Eric for 0.9.1 it seems.
1358 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
1360 *) Autodetect FreeBSD3.
1363 *) Fix various bugs in Configure. This affects the following platforms:
1367 unixware-2.0-pentium
1371 *) Eliminate generated files from CVS. Reorder tests to regenerate files
1372 before they are needed.
1375 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
1379 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
1381 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
1382 changed SSLeay to OpenSSL in version strings.
1383 [Ralf S. Engelschall]
1385 *) Some fixups to the top-level documents.
1388 *) Fixed the nasty bug where rsaref.h was not found under compile-time
1389 because the symlink to include/ was missing.
1390 [Ralf S. Engelschall]
1392 *) Incorporated the popular no-RSA/DSA-only patches
1393 which allow to compile a RSA-free SSLeay.
1394 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
1396 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
1397 when "ssleay" is still not found.
1398 [Ralf S. Engelschall]
1400 *) Added more platforms to Configure: Cray T3E, HPUX 11,
1401 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
1403 *) Updated the README file.
1404 [Ralf S. Engelschall]
1406 *) Added various .cvsignore files in the CVS repository subdirs
1407 to make a "cvs update" really silent.
1408 [Ralf S. Engelschall]
1410 *) Recompiled the error-definition header files and added
1411 missing symbols to the Win32 linker tables.
1412 [Ralf S. Engelschall]
1414 *) Cleaned up the top-level documents;
1415 o new files: CHANGES and LICENSE
1416 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
1417 o merged COPYRIGHT into LICENSE
1418 o removed obsolete TODO file
1419 o renamed MICROSOFT to INSTALL.W32
1420 [Ralf S. Engelschall]
1422 *) Removed dummy files from the 0.9.1b source tree:
1423 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
1424 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
1425 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
1426 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
1427 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
1428 [Ralf S. Engelschall]
1430 *) Added various platform portability fixes.
1433 *) The Genesis of the OpenSSL rpject:
1434 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
1435 Young and Tim J. Hudson created while they were working for C2Net until
1437 [The OpenSSL Project]
1440 Changes between 0.9.0b and 0.9.1b [not released]
1442 *) Updated a few CA certificates under certs/
1445 *) Changed some BIGNUM api stuff.
1448 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
1449 DGUX x86, Linux Alpha, etc.
1452 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
1453 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
1457 *) Add -strparse option to asn1pars program which parses nested
1459 [Dr Stephen Henson <shenson@bigfoot.com>]
1461 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
1464 *) DSA fix for "ca" program.
1467 *) Added "-genkey" option to "dsaparam" program.
1470 *) Added RIPE MD160 (rmd160) message digest.
1473 *) Added -a (all) option to "ssleay version" command.
1476 *) Added PLATFORM define which is the id given to Configure.
1479 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
1482 *) Extended the ASN.1 parser routines.
1485 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
1488 *) Added a BN_CTX to the BN library.
1491 *) Fixed the weak key values in DES library
1494 *) Changed API in EVP library for cipher aliases.
1497 *) Added support for RC2/64bit cipher.
1500 *) Converted the lhash library to the crypto/mem.c functions.
1503 *) Added more recognized ASN.1 object ids.
1506 *) Added more RSA padding checks for SSL/TLS.
1509 *) Added BIO proxy/filter functionality.
1512 *) Added extra_certs to SSL_CTX which can be used
1513 send extra CA certificates to the client in the CA cert chain sending
1514 process. It can be configured with SSL_CTX_add_extra_chain_cert().
1517 *) Now Fortezza is denied in the authentication phase because
1518 this is key exchange mechanism is not supported by SSLeay at all.
1521 *) Additional PKCS1 checks.
1524 *) Support the string "TLSv1" for all TLS v1 ciphers.
1527 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
1528 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
1531 *) Fixed a few memory leaks.
1534 *) Fixed various code and comment typos.
1537 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
1538 bytes sent in the client random.
1539 [Edward Bishop <ebishop@spyglass.com>]