5 Changes between 1.0.1 and 1.1.0 [xx XXX xxxx]
7 *) Add server support for TLS v1.2 signature algorithms extension. Switch
8 to new signature format when needed using client digest preference.
9 All server ciphersuites should now work correctly in TLS v1.2. No client
10 support yet and no support for client certificates.
13 *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
14 to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
15 ciphersuites. At present only RSA key exchange ciphersuites work with
16 TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
17 SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
21 *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
22 with this defined it will not be affected by any changes to ssl internal
23 structures. Add several utility functions to allow openssl application
24 to work with OPENSSL_NO_SSL_INTERN defined.
27 *) Minor change to DRBG entropy callback semantics. In some cases
28 there is no mutiple of the block length between min_len and
29 max_len. Allow the callback to return more than max_len bytes
30 of entropy but discard any extra: it is the callback's responsibility
31 to ensure that the extra data discarded does not impact the
32 requested amount of entropy.
35 *) Add PRNG security strength checks to RSA, DSA and ECDSA using
36 information in FIPS186-3, SP800-57 and SP800-131A.
39 *) CCM support via EVP. Interface is very similar to GCM case except we
40 must supply all data in one chunk (i.e. no update, final) and the
41 message length must be supplied if AAD is used. Add algorithm test
45 *) Initial version of POST overhaul. Add POST callback to allow the status
46 of POST to be monitored and/or failures induced. Modify fips_test_suite
47 to use callback. Always run all selftests even if one fails.
50 *) XTS support including algorithm test driver in the fips_gcmtest program.
51 Note: this does increase the maximum key length from 32 to 64 bytes but
52 there should be no binary compatibility issues as existing applications
53 will never use XTS mode.
56 *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
57 to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
58 performs algorithm blocking for unapproved PRNG types. Also do not
59 set PRNG type in FIPS_mode_set(): leave this to the application.
60 Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
61 the standard OpenSSL PRNG: set additional data to a date time vector.
64 *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
65 This shouldn't present any incompatibility problems because applications
66 shouldn't be using these directly and any that are will need to rethink
67 anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
70 *) Extensive self tests and health checking required by SP800-90 DRBG.
71 Remove strength parameter from FIPS_drbg_instantiate and always
72 instantiate at maximum supported strength.
76 [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
78 *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
81 *) New algorithm test program fips_dhvs to handle DH primitives only testing.
84 *) New function DH_compute_key_padded() to compute a DH key and pad with
85 leading zeroes if needed: this complies with SP800-56A et al.
88 *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
89 anything, incomplete, subject to change and largely untested at present.
92 *) Modify fipscanisteronly build option to only build the necessary object
93 files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
96 *) Add experimental option FIPSSYMS to give all symbols in
97 fipscanister.o and FIPS or fips prefix. This will avoid
98 conflicts with future versions of OpenSSL. Add perl script
99 util/fipsas.pl to preprocess assembly language source files
100 and rename any affected symbols.
103 *) Add selftest checks and algorithm block of non-fips algorithms in
104 FIPS mode. Remove DES2 from selftests.
107 *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
108 return internal method without any ENGINE dependencies. Add new
109 tiny fips sign and verify functions.
112 *) New build option no-ec2m to disable characteristic 2 code.
115 *) New build option "fipscanisteronly". This only builds fipscanister.o
116 and (currently) associated fips utilities. Uses the file Makefile.fips
117 instead of Makefile.org as the prototype.
120 *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
121 Update fips_gcmtest to use IV generator.
124 *) Initial, experimental EVP support for AES-GCM. AAD can be input by
125 setting output buffer to NULL. The *Final function must be
126 called although it will not retrieve any additional data. The tag
127 can be set or retrieved with a ctrl. The IV length is by default 12
128 bytes (96 bits) but can be set to an alternative value. If the IV
129 length exceeds the maximum IV length (currently 16 bytes) it cannot be
133 *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
134 underlying do_cipher function handles all cipher semantics itself
135 including padding and finalisation. This is useful if (for example)
136 an ENGINE cipher handles block padding itself. The behaviour of
137 do_cipher is subtly changed if this flag is set: the return value
138 is the number of characters written to the output buffer (zero is
139 no longer an error code) or a negative error code. Also if the
140 input buffer is NULL and length 0 finalisation should be performed.
143 *) If a candidate issuer certificate is already part of the constructed
144 path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
147 *) Improve forward-security support: add functions
149 void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
150 void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
152 for use by SSL/TLS servers; the callback function will be called whenever a
153 new session is created, and gets to decide whether the session may be
154 cached to make it resumable (return 0) or not (return 1). (As by the
155 SSL/TLS protocol specifications, the session_id sent by the server will be
156 empty to indicate that the session is not resumable; also, the server will
157 not generate RFC 4507 (RFC 5077) session tickets.)
159 A simple reasonable callback implementation is to return is_forward_secure.
160 This parameter will be set to 1 or 0 depending on the ciphersuite selected
161 by the SSL/TLS server library, indicating whether it can provide forward
163 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
165 *) Add Next Protocol Negotiation,
166 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
167 disabled with a no-npn flag to config or Configure. Code donated
169 [Adam Langley <agl@google.com> and Ben Laurie]
171 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
172 all platforms. Move ssize_t definition from e_os.h to the public
173 header file e_os2.h as it now appears in public header file cms.h
176 *) New function OPENSSL_gmtime_diff to find the difference in days
177 and seconds between two tm structures. This will be used to provide
178 additional functionality for ASN1_TIME.
181 *) New -sigopt option to the ca, req and x509 utilities. Additional
182 signature parameters can be passed using this option and in
186 *) Add RSA PSS signing function. This will generate and set the
187 appropriate AlgorithmIdentifiers for PSS based on those in the
188 corresponding EVP_MD_CTX structure. No application support yet.
191 *) Support for companion algorithm specific ASN1 signing routines.
192 New function ASN1_item_sign_ctx() signs a pre-initialised
193 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
194 the appropriate parameters.
197 *) Add new algorithm specific ASN1 verification initialisation function
198 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
199 handling will be the same no matter what EVP_PKEY_METHOD is used.
200 Add a PSS handler to support verification of PSS signatures: checked
201 against a number of sample certificates.
204 *) Add signature printing for PSS. Add PSS OIDs.
205 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
207 *) Add algorithm specific signature printing. An individual ASN1 method
208 can now print out signatures instead of the standard hex dump.
210 More complex signatures (e.g. PSS) can print out more meaningful
211 information. Include DSA version that prints out the signature
215 *) Add -trusted_first option which attempts to find certificates in the
216 trusted store even if an untrusted chain is also supplied.
219 *) Initial experimental support for explicitly trusted non-root CAs.
220 OpenSSL still tries to build a complete chain to a root but if an
221 intermediate CA has a trust setting included that is used. The first
222 setting is used: whether to trust or reject.
225 *) New -verify_name option in command line utilities to set verification
229 *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
230 Add CMAC pkey methods.
233 *) Experiemental regnegotiation in s_server -www mode. If the client
234 browses /reneg connection is renegotiated. If /renegcert it is
235 renegotiated requesting a certificate.
238 *) Add an "external" session cache for debugging purposes to s_server. This
239 should help trace issues which normally are only apparent in deployed
240 multi-process servers.
243 *) Experiemental password based recipient info support for CMS library:
244 implementing RFC3211.
247 *) Split password based encryption into PBES2 and PBKDF2 functions. This
248 neatly separates the code into cipher and PBE sections and is required
249 for some algorithms that split PBES2 into separate pieces (such as
253 *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
254 return value is ignored. NB. The functions RAND_add(), RAND_seed(),
255 BIO_set_cipher() and some obscure PEM functions were changed so they
256 can now return an error. The RAND changes required a change to the
257 RAND_METHOD structure.
260 *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
261 a gcc attribute to warn if the result of a function is ignored. This
262 is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
263 whose return value is often ignored.
266 Changes between 1.0.0d and 1.0.1 [xx XXX xxxx]
268 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
271 *) Add EC_GFp_nistp224_method(), a 64-bit optimized implementation for
272 elliptic curve NIST-P224 with constant-time single point multiplication on
273 typical inputs. EC_GROUP_new_by_curve_name() will automatically use this
274 (while EC_GROUP_new_curve_GFp() currently won't and prefers the more
275 flexible implementations).
277 The implementation requires support for the nonstandard type __uint128_t,
278 and so is disabled by default. To include this in your build of OpenSSL,
279 use -DEC_NISTP224_64_GCC_128 on the Configure (or config) command line,
280 and run "make depend" (or "make update").
281 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
283 *) Permit abbreviated handshakes when renegotiating using the function
284 SSL_renegotiate_abbreviated().
285 [Robin Seggelmann <seggelmann@fh-muenster.de>]
287 *) Add call to ENGINE_register_all_complete() to
288 ENGINE_load_builtin_engines(), so some implementations get used
289 automatically instead of needing explicit application support.
292 *) Add support for TLS key exporter as described in RFC5705.
293 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
295 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
296 a few changes are required:
298 Add SSL_OP_NO_TLSv1_1 flag.
300 Update version checking logic to handle version 1.1.
301 Add explicit IV handling (ported from DTLS code).
302 Add command line options to s_client/s_server.
305 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
307 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
308 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
310 *) Fix bug in string printing code: if *any* escaping is enabled we must
311 escape the escape character (backslash) or the resulting string is
315 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
317 *) Disable code workaround for ancient and obsolete Netscape browsers
318 and servers: an attacker can use it in a ciphersuite downgrade attack.
319 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
322 *) Fixed J-PAKE implementation error, originally discovered by
323 Sebastien Martini, further info and confirmation from Stefan
324 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
327 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
329 *) Fix extension code to avoid race conditions which can result in a buffer
330 overrun vulnerability: resumed sessions must not be modified as they can
331 be shared by multiple threads. CVE-2010-3864
334 *) Fix WIN32 build system to correctly link an ENGINE directory into
338 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
340 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
342 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
344 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
346 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
347 context. The operation can be customised via the ctrl mechanism in
348 case ENGINEs want to include additional functionality.
351 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
354 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
355 output hashes compatible with older versions of OpenSSL.
356 [Willy Weisz <weisz@vcpc.univie.ac.at>]
358 *) Fix compression algorithm handling: if resuming a session use the
359 compression algorithm of the resumed session instead of determining
360 it from client hello again. Don't allow server to change algorithm.
363 *) Add load_crls() function to apps tidying load_certs() too. Add option
364 to verify utility to allow additional CRLs to be included.
367 *) Update OCSP request code to permit adding custom headers to the request:
368 some responders need this.
371 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
373 [Julia Lawall <julia@diku.dk>]
375 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
376 needlessly dereferenced structures, used obsolete functions and
377 didn't handle all updated verify codes correctly.
380 *) Disable MD2 in the default configuration.
383 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
384 indicate the initial BIO being pushed or popped. This makes it possible
385 to determine whether the BIO is the one explicitly called or as a result
386 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
387 it handles reference counts correctly and doesn't zero out the I/O bio
388 when it is not being explicitly popped. WARNING: applications which
389 included workarounds for the old buggy behaviour will need to be modified
390 or they could free up already freed BIOs.
393 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
394 renaming to all platforms (within the 0.9.8 branch, this was
395 done conditionally on Netware platforms to avoid a name clash).
396 [Guenter <lists@gknw.net>]
398 *) Add ECDHE and PSK support to DTLS.
399 [Michael Tuexen <tuexen@fh-muenster.de>]
401 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
405 *) Add "missing" function EVP_MD_flags() (without this the only way to
406 retrieve a digest flags is by accessing the structure directly. Update
407 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
408 or cipher is registered as in the "from" argument. Print out all
409 registered digests in the dgst usage message instead of manually
410 attempting to work them out.
413 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
414 this allows the use of compression and extensions. Change default cipher
415 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
416 by default unless an application cipher string requests it.
419 *) Alter match criteria in PKCS12_parse(). It used to try to use local
420 key ids to find matching certificates and keys but some PKCS#12 files
421 don't follow the (somewhat unwritten) rules and this strategy fails.
422 Now just gather all certificates together and the first private key
423 then look for the first certificate that matches the key.
426 *) Support use of registered digest and cipher names for dgst and cipher
427 commands instead of having to add each one as a special case. So now
434 openssl dgst -sha256 foo
436 and this works for ENGINE based algorithms too.
440 *) Update Gost ENGINE to support parameter files.
441 [Victor B. Wagner <vitus@cryptocom.ru>]
443 *) Support GeneralizedTime in ca utility.
444 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
446 *) Enhance the hash format used for certificate directory links. The new
447 form uses the canonical encoding (meaning equivalent names will work
448 even if they aren't identical) and uses SHA1 instead of MD5. This form
449 is incompatible with the older format and as a result c_rehash should
450 be used to rebuild symbolic links.
453 *) Make PKCS#8 the default write format for private keys, replacing the
454 traditional format. This form is standardised, more secure and doesn't
455 include an implicit MD5 dependency.
458 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
459 committed to OpenSSL should pass this lot as a minimum.
462 *) Add session ticket override functionality for use by EAP-FAST.
463 [Jouni Malinen <j@w1.fi>]
465 *) Modify HMAC functions to return a value. Since these can be implemented
466 in an ENGINE errors can occur.
469 *) Type-checked OBJ_bsearch_ex.
472 *) Type-checked OBJ_bsearch. Also some constification necessitated
473 by type-checking. Still to come: TXT_DB, bsearch(?),
474 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
478 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
479 seconds to a tm structure directly, instead of going through OS
480 specific date routines. This avoids any issues with OS routines such
481 as the year 2038 bug. New *_adj() functions for ASN1 time structures
482 and X509_time_adj_ex() to cover the extended range. The existing
483 X509_time_adj() is still usable and will no longer have any date issues.
486 *) Delta CRL support. New use deltas option which will attempt to locate
487 and search any appropriate delta CRLs available.
489 This work was sponsored by Google.
492 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
493 code and add additional score elements. Validate alternate CRL paths
494 as part of the CRL checking and indicate a new error "CRL path validation
495 error" in this case. Applications wanting additional details can use
496 the verify callback and check the new "parent" field. If this is not
497 NULL CRL path validation is taking place. Existing applications wont
498 see this because it requires extended CRL support which is off by
501 This work was sponsored by Google.
504 *) Support for freshest CRL extension.
506 This work was sponsored by Google.
509 *) Initial indirect CRL support. Currently only supported in the CRLs
510 passed directly and not via lookup. Process certificate issuer
511 CRL entry extension and lookup CRL entries by bother issuer name
512 and serial number. Check and process CRL issuer entry in IDP extension.
514 This work was sponsored by Google.
517 *) Add support for distinct certificate and CRL paths. The CRL issuer
518 certificate is validated separately in this case. Only enabled if
519 an extended CRL support flag is set: this flag will enable additional
520 CRL functionality in future.
522 This work was sponsored by Google.
525 *) Add support for policy mappings extension.
527 This work was sponsored by Google.
530 *) Fixes to pathlength constraint, self issued certificate handling,
531 policy processing to align with RFC3280 and PKITS tests.
533 This work was sponsored by Google.
536 *) Support for name constraints certificate extension. DN, email, DNS
537 and URI types are currently supported.
539 This work was sponsored by Google.
542 *) To cater for systems that provide a pointer-based thread ID rather
543 than numeric, deprecate the current numeric thread ID mechanism and
544 replace it with a structure and associated callback type. This
545 mechanism allows a numeric "hash" to be extracted from a thread ID in
546 either case, and on platforms where pointers are larger than 'long',
547 mixing is done to help ensure the numeric 'hash' is usable even if it
548 can't be guaranteed unique. The default mechanism is to use "&errno"
549 as a pointer-based thread ID to distinguish between threads.
551 Applications that want to provide their own thread IDs should now use
552 CRYPTO_THREADID_set_callback() to register a callback that will call
553 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
555 Note that ERR_remove_state() is now deprecated, because it is tied
556 to the assumption that thread IDs are numeric. ERR_remove_state(0)
557 to free the current thread's error state should be replaced by
558 ERR_remove_thread_state(NULL).
560 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
561 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
562 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
563 application was previously providing a numeric thread callback that
564 was inappropriate for distinguishing threads, then uniqueness might
565 have been obtained with &errno that happened immediately in the
566 intermediate development versions of OpenSSL; this is no longer the
567 case, the numeric thread callback will now override the automatic use
569 [Geoff Thorpe, with help from Bodo Moeller]
571 *) Initial support for different CRL issuing certificates. This covers a
572 simple case where the self issued certificates in the chain exist and
573 the real CRL issuer is higher in the existing chain.
575 This work was sponsored by Google.
578 *) Removed effectively defunct crypto/store from the build.
581 *) Revamp of STACK to provide stronger type-checking. Still to come:
582 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
583 ASN1_STRING, CONF_VALUE.
586 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
587 RAM on SSL connections. This option can save about 34k per idle SSL.
590 *) Revamp of LHASH to provide stronger type-checking. Still to come:
591 STACK, TXT_DB, bsearch, qsort.
594 *) Initial support for Cryptographic Message Syntax (aka CMS) based
595 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
596 support for data, signedData, compressedData, digestedData and
597 encryptedData, envelopedData types included. Scripts to check against
598 RFC4134 examples draft and interop and consistency checks of many
599 content types and variants.
602 *) Add options to enc utility to support use of zlib compression BIO.
605 *) Extend mk1mf to support importing of options and assembly language
606 files from Configure script, currently only included in VC-WIN32.
607 The assembly language rules can now optionally generate the source
608 files from the associated perl scripts.
611 *) Implement remaining functionality needed to support GOST ciphersuites.
612 Interop testing has been performed using CryptoPro implementations.
613 [Victor B. Wagner <vitus@cryptocom.ru>]
615 *) s390x assembler pack.
618 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
622 *) Implement Opaque PRF Input TLS extension as specified in
623 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
624 official specification yet and no extension type assignment by
625 IANA exists, this extension (for now) will have to be explicitly
626 enabled when building OpenSSL by providing the extension number
627 to use. For example, specify an option
629 -DTLSEXT_TYPE_opaque_prf_input=0x9527
631 to the "config" or "Configure" script to enable the extension,
632 assuming extension number 0x9527 (which is a completely arbitrary
633 and unofficial assignment based on the MD5 hash of the Internet
634 Draft). Note that by doing so, you potentially lose
635 interoperability with other TLS implementations since these might
636 be using the same extension number for other purposes.
638 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
639 opaque PRF input value to use in the handshake. This will create
640 an interal copy of the length-'len' string at 'src', and will
641 return non-zero for success.
643 To get more control and flexibility, provide a callback function
646 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
647 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
651 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
654 Callback function 'cb' will be called in handshakes, and is
655 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
656 Argument 'arg' is for application purposes (the value as given to
657 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
658 be provided to the callback function). The callback function
659 has to return non-zero to report success: usually 1 to use opaque
660 PRF input just if possible, or 2 to enforce use of the opaque PRF
661 input. In the latter case, the library will abort the handshake
662 if opaque PRF input is not successfully negotiated.
664 Arguments 'peerinput' and 'len' given to the callback function
665 will always be NULL and 0 in the case of a client. A server will
666 see the client's opaque PRF input through these variables if
667 available (NULL and 0 otherwise). Note that if the server
668 provides an opaque PRF input, the length must be the same as the
669 length of the client's opaque PRF input.
671 Note that the callback function will only be called when creating
672 a new session (session resumption can resume whatever was
673 previously negotiated), and will not be called in SSL 2.0
674 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
675 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
676 for applications that need to enforce opaque PRF input.
680 *) Update ssl code to support digests other than SHA1+MD5 for handshake
683 [Victor B. Wagner <vitus@cryptocom.ru>]
685 *) Add RFC4507 support to OpenSSL. This includes the corrections in
686 RFC4507bis. The encrypted ticket format is an encrypted encoded
687 SSL_SESSION structure, that way new session features are automatically
690 If a client application caches session in an SSL_SESSION structure
691 support is transparent because tickets are now stored in the encoded
694 The SSL_CTX structure automatically generates keys for ticket
695 protection in servers so again support should be possible
696 with no application modification.
698 If a client or server wishes to disable RFC4507 support then the option
699 SSL_OP_NO_TICKET can be set.
701 Add a TLS extension debugging callback to allow the contents of any client
702 or server extensions to be examined.
704 This work was sponsored by Google.
707 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
708 OpenSSL should now compile cleanly on gcc 4.2
709 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
711 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
712 support including streaming MAC support: this is required for GOST
714 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
716 *) Add option -stream to use PKCS#7 streaming in smime utility. New
717 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
718 to output in BER and PEM format.
721 *) Experimental support for use of HMAC via EVP_PKEY interface. This
722 allows HMAC to be handled via the EVP_DigestSign*() interface. The
723 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
724 ENGINE support for HMAC keys which are unextractable. New -mac and
725 -macopt options to dgst utility.
728 *) New option -sigopt to dgst utility. Update dgst to use
729 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
730 alternative signing paramaters such as X9.31 or PSS in the dgst
734 *) Change ssl_cipher_apply_rule(), the internal function that does
735 the work each time a ciphersuite string requests enabling
736 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
737 removing ("!foo+bar") a class of ciphersuites: Now it maintains
738 the order of disabled ciphersuites such that those ciphersuites
739 that most recently went from enabled to disabled not only stay
740 in order with respect to each other, but also have higher priority
741 than other disabled ciphersuites the next time ciphersuites are
744 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
745 the same ciphersuites as with "HIGH" alone, but in a specific
746 order where the PSK ciphersuites come first (since they are the
747 most recently disabled ciphersuites when "HIGH" is parsed).
749 Also, change ssl_create_cipher_list() (using this new
750 funcionality) such that between otherwise identical
751 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
755 *) Change ssl_create_cipher_list() so that it automatically
756 arranges the ciphersuites in reasonable order before starting
757 to process the rule string. Thus, the definition for "DEFAULT"
758 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
759 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
760 This makes it much easier to arrive at a reasonable default order
761 in applications for which anonymous ciphers are OK (meaning
762 that you can't actually use DEFAULT).
763 [Bodo Moeller; suggested by Victor Duchovni]
765 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
766 processing) into multiple integers instead of setting
767 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
768 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
769 (These masks as well as the individual bit definitions are hidden
770 away into the non-exported interface ssl/ssl_locl.h, so this
771 change to the definition of the SSL_CIPHER structure shouldn't
772 affect applications.) This give us more bits for each of these
773 categories, so there is no longer a need to coagulate AES128 and
774 AES256 into a single algorithm bit, and to coagulate Camellia128
775 and Camellia256 into a single algorithm bit, which has led to all
778 Thus, among other things, the kludge introduced in 0.9.7m and
779 0.9.8e for masking out AES256 independently of AES128 or masking
780 out Camellia256 independently of AES256 is not needed here in 0.9.9.
782 With the change, we also introduce new ciphersuite aliases that
783 so far were missing: "AES128", "AES256", "CAMELLIA128", and
787 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
788 Use the leftmost N bytes of the signature input if the input is
789 larger than the prime q (with N being the size in bytes of q).
792 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
793 it yet and it is largely untested.
796 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
799 *) Initial incomplete changes to avoid need for function casts in OpenSSL
800 some compilers (gcc 4.2 and later) reject their use. Safestack is
801 reimplemented. Update ASN1 to avoid use of legacy functions.
804 *) Win32/64 targets are linked with Winsock2.
807 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
808 to external functions. This can be used to increase CRL handling
809 efficiency especially when CRLs are very large by (for example) storing
810 the CRL revoked certificates in a database.
813 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
814 new CRLs added to a directory can be used. New command line option
815 -verify_return_error to s_client and s_server. This causes real errors
816 to be returned by the verify callback instead of carrying on no matter
817 what. This reflects the way a "real world" verify callback would behave.
820 *) GOST engine, supporting several GOST algorithms and public key formats.
821 Kindly donated by Cryptocom.
824 *) Partial support for Issuing Distribution Point CRL extension. CRLs
825 partitioned by DP are handled but no indirect CRL or reason partitioning
826 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
827 selected via a scoring technique which handles IDP and AKID in CRLs.
830 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
831 will ultimately be used for all verify operations: this will remove the
832 X509_STORE dependency on certificate verification and allow alternative
833 lookup methods. X509_STORE based implementations of these two callbacks.
836 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
837 Modify get_crl() to find a valid (unexpired) CRL if possible.
840 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
841 this would be called X509_CRL_cmp() but that name is already used by
842 a function that just compares CRL issuer names. Cache several CRL
843 extensions in X509_CRL structure and cache CRLDP in X509.
846 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
847 this maps equivalent X509_NAME structures into a consistent structure.
848 Name comparison can then be performed rapidly using memcmp().
851 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
855 *) Allow digests to supply their own micalg string for S/MIME type using
856 the ctrl EVP_MD_CTRL_MICALG.
859 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
860 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
861 ctrl. It can then customise the structure before and/or after signing
865 *) New function OBJ_add_sigid() to allow application defined signature OIDs
866 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
867 to free up any added signature OIDs.
870 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
871 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
872 digest and cipher tables. New options added to openssl utility:
873 list-message-digest-algorithms and list-cipher-algorithms.
876 *) Change the array representation of binary polynomials: the list
877 of degrees of non-zero coefficients is now terminated with -1.
878 Previously it was terminated with 0, which was also part of the
879 value; thus, the array representation was not applicable to
880 polynomials where t^0 has coefficient zero. This change makes
881 the array representation useful in a more general context.
884 *) Various modifications and fixes to SSL/TLS cipher string
885 handling. For ECC, the code now distinguishes between fixed ECDH
886 with RSA certificates on the one hand and with ECDSA certificates
887 on the other hand, since these are separate ciphersuites. The
888 unused code for Fortezza ciphersuites has been removed.
890 For consistency with EDH, ephemeral ECDH is now called "EECDH"
891 (not "ECDHE"). For consistency with the code for DH
892 certificates, use of ECDH certificates is now considered ECDH
893 authentication, not RSA or ECDSA authentication (the latter is
894 merely the CA's signing algorithm and not actively used in the
897 The temporary ciphersuite alias "ECCdraft" is no longer
898 available, and ECC ciphersuites are no longer excluded from "ALL"
899 and "DEFAULT". The following aliases now exist for RFC 4492
900 ciphersuites, most of these by analogy with the DH case:
902 kECDHr - ECDH cert, signed with RSA
903 kECDHe - ECDH cert, signed with ECDSA
904 kECDH - ECDH cert (signed with either RSA or ECDSA)
905 kEECDH - ephemeral ECDH
906 ECDH - ECDH cert or ephemeral ECDH
912 AECDH - anonymous ECDH
913 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
917 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
918 Use correct micalg parameters depending on digest(s) in signed message.
921 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
922 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
925 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
926 an engine to register a method. Add ENGINE lookups for methods and
927 functional reference processing.
930 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
931 EVP_{Sign,Verify}* which allow an application to customise the signature
935 *) New -resign option to smime utility. This adds one or more signers
936 to an existing PKCS#7 signedData structure. Also -md option to use an
937 alternative message digest algorithm for signing.
940 *) Tidy up PKCS#7 routines and add new functions to make it easier to
941 create PKCS7 structures containing multiple signers. Update smime
942 application to support multiple signers.
945 *) New -macalg option to pkcs12 utility to allow setting of an alternative
949 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
950 Reorganize PBE internals to lookup from a static table using NIDs,
951 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
952 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
953 PRF which will be automatically used with PBES2.
956 *) Replace the algorithm specific calls to generate keys in "req" with the
960 *) Update PKCS#7 enveloped data routines to use new API. This is now
961 supported by any public key method supporting the encrypt operation. A
962 ctrl is added to allow the public key algorithm to examine or modify
963 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
967 *) Add a ctrl to asn1 method to allow a public key algorithm to express
968 a default digest type to use. In most cases this will be SHA1 but some
969 algorithms (such as GOST) need to specify an alternative digest. The
970 return value indicates how strong the prefernce is 1 means optional and
971 2 is mandatory (that is it is the only supported type). Modify
972 ASN1_item_sign() to accept a NULL digest argument to indicate it should
973 use the default md. Update openssl utilities to use the default digest
974 type for signing if it is not explicitly indicated.
977 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
978 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
979 signing method from the key type. This effectively removes the link
980 between digests and public key types.
983 *) Add an OID cross reference table and utility functions. Its purpose is to
984 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
985 rsaEncryption. This will allow some of the algorithm specific hackery
986 needed to use the correct OID to be removed.
989 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
990 structures for PKCS7_sign(). They are now set up by the relevant public
994 *) Add provisional EC pkey method with support for ECDSA and ECDH.
997 *) Add support for key derivation (agreement) in the API, DH method and
1001 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
1002 public and private key formats. As a side effect these add additional
1003 command line functionality not previously available: DSA signatures can be
1004 generated and verified using pkeyutl and DH key support and generation in
1009 [Oliver Tappe <zooey@hirschkaefer.de>]
1011 *) New make target "install_html_docs" installs HTML renditions of the
1013 [Oliver Tappe <zooey@hirschkaefer.de>]
1015 *) New utility "genpkey" this is analagous to "genrsa" etc except it can
1016 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
1017 support key and parameter generation and add initial key generation
1018 functionality for RSA.
1021 *) Add functions for main EVP_PKEY_method operations. The undocumented
1022 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
1023 EVP_PKEY_{encrypt,decrypt}_old.
1026 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
1027 key API, doesn't do much yet.
1030 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
1031 public key algorithms. New option to openssl utility:
1032 "list-public-key-algorithms" to print out info.
1035 *) Implement the Supported Elliptic Curves Extension for
1036 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1039 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
1040 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
1043 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
1044 utilities such as rsa, dsa, dsaparam etc except they process any key
1048 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
1049 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
1050 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
1054 *) Initial support for pluggable public key ASN1.
1055 De-spaghettify the public key ASN1 handling. Move public and private
1056 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
1057 algorithm specific handling to a single module within the relevant
1058 algorithm directory. Add functions to allow (near) opaque processing
1059 of public and private key structures.
1062 *) Implement the Supported Point Formats Extension for
1063 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1066 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
1067 for the psk identity [hint] and the psk callback functions to the
1068 SSL_SESSION, SSL and SSL_CTX structure.
1071 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
1075 SSL_CTX_use_psk_identity_hint
1076 SSL_get_psk_identity_hint
1077 SSL_get_psk_identity
1078 SSL_use_psk_identity_hint
1080 [Mika Kousa and Pasi Eronen of Nokia Corporation]
1082 *) Add RFC 3161 compliant time stamp request creation, response generation
1083 and response verification functionality.
1084 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
1086 *) Add initial support for TLS extensions, specifically for the server_name
1087 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1088 have new members for a host name. The SSL data structure has an
1089 additional member SSL_CTX *initial_ctx so that new sessions can be
1090 stored in that context to allow for session resumption, even after the
1091 SSL has been switched to a new SSL_CTX in reaction to a client's
1092 server_name extension.
1094 New functions (subject to change):
1096 SSL_get_servername()
1097 SSL_get_servername_type()
1100 New CTRL codes and macros (subject to change):
1102 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1103 - SSL_CTX_set_tlsext_servername_callback()
1104 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1105 - SSL_CTX_set_tlsext_servername_arg()
1106 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1108 openssl s_client has a new '-servername ...' option.
1110 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1111 '-key2 ...', '-servername_fatal' (subject to change). This allows
1112 testing the HostName extension for a specific single host name ('-cert'
1113 and '-key' remain fallbacks for handshakes without HostName
1114 negotiation). If the unrecogninzed_name alert has to be sent, this by
1115 default is a warning; it becomes fatal with the '-servername_fatal'
1118 [Peter Sylvester, Remy Allais, Christophe Renou]
1120 *) Whirlpool hash implementation is added.
1123 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
1124 bn(64,32). Because of instruction set limitations it doesn't have
1125 any negative impact on performance. This was done mostly in order
1126 to make it possible to share assembler modules, such as bn_mul_mont
1127 implementations, between 32- and 64-bit builds without hassle.
1130 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
1131 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
1135 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
1136 dedicated Montgomery multiplication procedure, is introduced.
1137 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
1138 "64-bit" performance on certain 32-bit targets.
1141 *) New option SSL_OP_NO_COMP to disable use of compression selectively
1142 in SSL structures. New SSL ctrl to set maximum send fragment size.
1143 Save memory by seeting the I/O buffer sizes dynamically instead of
1144 using the maximum available value.
1147 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
1148 in addition to the text details.
1151 *) Very, very preliminary EXPERIMENTAL support for printing of general
1152 ASN1 structures. This currently produces rather ugly output and doesn't
1153 handle several customised structures at all.
1156 *) Integrated support for PVK file format and some related formats such
1157 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
1158 these in the 'rsa' and 'dsa' utilities.
1161 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
1164 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
1165 place for the (very old) "NETSCAPE" format certificates which are now
1166 handled using new ASN1 code equivalents.
1169 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
1170 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
1171 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
1174 *) Modify CRL distribution points extension code to print out previously
1175 unsupported fields. Enhance extension setting code to allow setting of
1179 *) Add print and set support for Issuing Distribution Point CRL extension.
1182 *) Change 'Configure' script to enable Camellia by default.
1185 Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
1187 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
1188 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
1190 *) Fix bug in string printing code: if *any* escaping is enabled we must
1191 escape the escape character (backslash) or the resulting string is
1195 Changes between 0.9.8p and 0.9.8q [2 Dec 2010]
1197 *) Disable code workaround for ancient and obsolete Netscape browsers
1198 and servers: an attacker can use it in a ciphersuite downgrade attack.
1199 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
1202 *) Fixed J-PAKE implementation error, originally discovered by
1203 Sebastien Martini, further info and confirmation from Stefan
1204 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
1207 Changes between 0.9.8o and 0.9.8p [16 Nov 2010]
1209 *) Fix extension code to avoid race conditions which can result in a buffer
1210 overrun vulnerability: resumed sessions must not be modified as they can
1211 be shared by multiple threads. CVE-2010-3864
1214 *) Fix for double free bug in ssl/s3_clnt.c CVE-2010-2939
1217 *) Don't reencode certificate when calculating signature: cache and use
1218 the original encoding instead. This makes signature verification of
1219 some broken encodings work correctly.
1222 *) ec2_GF2m_simple_mul bugfix: compute correct result if the output EC_POINT
1223 is also one of the inputs.
1224 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
1226 *) Don't repeatedly append PBE algorithms to table if they already exist.
1227 Sort table on each new add. This effectively makes the table read only
1228 after all algorithms are added and subsequent calls to PKCS12_pbe_add
1232 Changes between 0.9.8n and 0.9.8o [01 Jun 2010]
1234 [NB: OpenSSL 0.9.8o and later 0.9.8 patch levels were released after
1237 *) Correct a typo in the CMS ASN1 module which can result in invalid memory
1238 access or freeing data twice (CVE-2010-0742)
1239 [Steve Henson, Ronald Moesbergen <intercommit@gmail.com>]
1241 *) Add SHA2 algorithms to SSL_library_init(). SHA2 is becoming far more
1242 common in certificates and some applications which only call
1243 SSL_library_init and not OpenSSL_add_all_algorithms() will fail.
1247 Reduce copying into .apps and .test in makevms.com
1248 Don't try to use blank CA certificate in CA.com
1249 Allow use of C files from original directories in maketests.com
1250 [Steven M. Schweda" <sms@antinode.info>]
1252 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
1254 *) When rejecting SSL/TLS records due to an incorrect version number, never
1255 update s->server with a new major version number. As of
1256 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
1257 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
1258 the previous behavior could result in a read attempt at NULL when
1259 receiving specific incorrect SSL/TLS records once record payload
1260 protection is active. (CVE-2010-0740)
1261 [Bodo Moeller, Adam Langley <agl@chromium.org>]
1263 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
1264 could be crashed if the relevant tables were not present (e.g. chrooted).
1265 [Tomas Hoger <thoger@redhat.com>]
1267 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
1269 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
1270 [Martin Olsson, Neel Mehta]
1272 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
1273 accommodate for stack sorting, always a write lock!).
1276 *) On some versions of WIN32 Heap32Next is very slow. This can cause
1277 excessive delays in the RAND_poll(): over a minute. As a workaround
1278 include a time check in the inner Heap32Next loop too.
1281 *) The code that handled flushing of data in SSL/TLS originally used the
1282 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
1283 the problem outlined in PR#1949. The fix suggested there however can
1284 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
1285 of Apache). So instead simplify the code to flush unconditionally.
1286 This should be fine since flushing with no data to flush is a no op.
1289 *) Handle TLS versions 2.0 and later properly and correctly use the
1290 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
1291 off ancient servers have a habit of sticking around for a while...
1294 *) Modify compression code so it frees up structures without using the
1295 ex_data callbacks. This works around a problem where some applications
1296 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
1297 restarting) then use compression (e.g. SSL with compression) later.
1298 This results in significant per-connection memory leaks and
1299 has caused some security issues including CVE-2008-1678 and
1303 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
1304 change when encrypting or decrypting.
1307 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
1308 connect and renegotiate with servers which do not support RI.
1309 Until RI is more widely deployed this option is enabled by default.
1312 *) Add "missing" ssl ctrls to clear options and mode.
1315 *) If client attempts to renegotiate and doesn't support RI respond with
1316 a no_renegotiation alert as required by RFC5746. Some renegotiating
1317 TLS clients will continue a connection gracefully when they receive
1318 the alert. Unfortunately OpenSSL mishandled this alert and would hang
1319 waiting for a server hello which it will never receive. Now we treat a
1320 received no_renegotiation alert as a fatal error. This is because
1321 applications requesting a renegotiation might well expect it to succeed
1322 and would have no code in place to handle the server denying it so the
1323 only safe thing to do is to terminate the connection.
1326 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
1327 peer supports secure renegotiation and 0 otherwise. Print out peer
1328 renegotiation support in s_client/s_server.
1331 *) Replace the highly broken and deprecated SPKAC certification method with
1332 the updated NID creation version. This should correctly handle UTF8.
1335 *) Implement RFC5746. Re-enable renegotiation but require the extension
1336 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
1337 turns out to be a bad idea. It has been replaced by
1338 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
1339 SSL_CTX_set_options(). This is really not recommended unless you
1340 know what you are doing.
1341 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
1343 *) Fixes to stateless session resumption handling. Use initial_ctx when
1344 issuing and attempting to decrypt tickets in case it has changed during
1345 servername handling. Use a non-zero length session ID when attempting
1346 stateless session resumption: this makes it possible to determine if
1347 a resumption has occurred immediately after receiving server hello
1348 (several places in OpenSSL subtly assume this) instead of later in
1352 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
1353 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
1354 fixes for a few places where the return code is not checked
1356 [Julia Lawall <julia@diku.dk>]
1358 *) Add --strict-warnings option to Configure script to include devteam
1359 warnings in other configurations.
1362 *) Add support for --libdir option and LIBDIR variable in makefiles. This
1363 makes it possible to install openssl libraries in locations which
1364 have names other than "lib", for example "/usr/lib64" which some
1366 [Steve Henson, based on patch from Jeremy Utley]
1368 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
1369 X690 8.9.12 and can produce some misleading textual output of OIDs.
1370 [Steve Henson, reported by Dan Kaminsky]
1372 *) Delete MD2 from algorithm tables. This follows the recommendation in
1373 several standards that it is not used in new applications due to
1374 several cryptographic weaknesses. For binary compatibility reasons
1375 the MD2 API is still compiled in by default.
1378 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
1382 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
1383 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
1385 [Guenter <lists@gknw.net>]
1387 *) Fix the server certificate chain building code to use X509_verify_cert(),
1388 it used to have an ad-hoc builder which was unable to cope with anything
1389 other than a simple chain.
1390 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
1392 *) Don't check self signed certificate signatures in X509_verify_cert()
1393 by default (a flag can override this): it just wastes time without
1394 adding any security. As a useful side effect self signed root CAs
1395 with non-FIPS digests are now usable in FIPS mode.
1398 *) In dtls1_process_out_of_seq_message() the check if the current message
1399 is already buffered was missing. For every new message was memory
1400 allocated, allowing an attacker to perform an denial of service attack
1401 with sending out of seq handshake messages until there is no memory
1402 left. Additionally every future messege was buffered, even if the
1403 sequence number made no sense and would be part of another handshake.
1404 So only messages with sequence numbers less than 10 in advance will be
1405 buffered. (CVE-2009-1378)
1406 [Robin Seggelmann, discovered by Daniel Mentz]
1408 *) Records are buffered if they arrive with a future epoch to be
1409 processed after finishing the corresponding handshake. There is
1410 currently no limitation to this buffer allowing an attacker to perform
1411 a DOS attack with sending records with future epochs until there is no
1412 memory left. This patch adds the pqueue_size() function to detemine
1413 the size of a buffer and limits the record buffer to 100 entries.
1415 [Robin Seggelmann, discovered by Daniel Mentz]
1417 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
1418 parent structure is freed. (CVE-2009-1379)
1421 *) Handle non-blocking I/O properly in SSL_shutdown() call.
1422 [Darryl Miles <darryl-mailinglists@netbauds.net>]
1425 [Ilya O. <vrghost@gmail.com>]
1427 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
1429 *) Disable renegotiation completely - this fixes a severe security
1430 problem (CVE-2009-3555) at the cost of breaking all
1431 renegotiation. Renegotiation can be re-enabled by setting
1432 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
1433 run-time. This is really not recommended unless you know what
1437 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
1439 *) Don't set val to NULL when freeing up structures, it is freed up by
1440 underlying code. If sizeof(void *) > sizeof(long) this can result in
1441 zeroing past the valid field. (CVE-2009-0789)
1442 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
1444 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
1445 checked correctly. This would allow some invalid signed attributes to
1446 appear to verify correctly. (CVE-2009-0591)
1447 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1449 *) Reject UniversalString and BMPString types with invalid lengths. This
1450 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
1451 a legal length. (CVE-2009-0590)
1454 *) Set S/MIME signing as the default purpose rather than setting it
1455 unconditionally. This allows applications to override it at the store
1459 *) Permit restricted recursion of ASN1 strings. This is needed in practice
1460 to handle some structures.
1463 *) Improve efficiency of mem_gets: don't search whole buffer each time
1465 [Jeremy Shapiro <jnshapir@us.ibm.com>]
1467 *) New -hex option for openssl rand.
1470 *) Print out UTF8String and NumericString when parsing ASN1.
1473 *) Support NumericString type for name components.
1476 *) Allow CC in the environment to override the automatically chosen
1477 compiler. Note that nothing is done to ensure flags work with the
1481 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
1483 *) Properly check EVP_VerifyFinal() and similar return values
1485 [Ben Laurie, Bodo Moeller, Google Security Team]
1487 *) Enable TLS extensions by default.
1490 *) Allow the CHIL engine to be loaded, whether the application is
1491 multithreaded or not. (This does not release the developer from the
1492 obligation to set up the dynamic locking callbacks.)
1493 [Sander Temme <sander@temme.net>]
1495 *) Use correct exit code if there is an error in dgst command.
1496 [Steve Henson; problem pointed out by Roland Dirlewanger]
1498 *) Tweak Configure so that you need to say "experimental-jpake" to enable
1499 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
1502 *) Add experimental JPAKE support, including demo authentication in
1503 s_client and s_server.
1506 *) Set the comparison function in v3_addr_canonize().
1507 [Rob Austein <sra@hactrn.net>]
1509 *) Add support for XMPP STARTTLS in s_client.
1510 [Philip Paeps <philip@freebsd.org>]
1512 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
1513 to ensure that even with this option, only ciphersuites in the
1514 server's preference list will be accepted. (Note that the option
1515 applies only when resuming a session, so the earlier behavior was
1516 just about the algorithm choice for symmetric cryptography.)
1519 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
1521 *) Fix NULL pointer dereference if a DTLS server received
1522 ChangeCipherSpec as first record (CVE-2009-1386).
1525 *) Fix a state transitition in s3_srvr.c and d1_srvr.c
1526 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
1529 *) The fix in 0.9.8c that supposedly got rid of unsafe
1530 double-checked locking was incomplete for RSA blinding,
1531 addressing just one layer of what turns out to have been
1532 doubly unsafe triple-checked locking.
1534 So now fix this for real by retiring the MONT_HELPER macro
1535 in crypto/rsa/rsa_eay.c.
1537 [Bodo Moeller; problem pointed out by Marius Schilder]
1539 *) Various precautionary measures:
1541 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
1543 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
1544 (NB: This would require knowledge of the secret session ticket key
1545 to exploit, in which case you'd be SOL either way.)
1547 - Change bn_nist.c so that it will properly handle input BIGNUMs
1548 outside the expected range.
1550 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
1553 [Neel Mehta, Bodo Moeller]
1555 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
1556 the load fails. Useful for distros.
1557 [Ben Laurie and the FreeBSD team]
1559 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
1562 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
1565 *) Expand ENGINE to support engine supplied SSL client certificate functions.
1567 This work was sponsored by Logica.
1570 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
1571 keystores. Support for SSL/TLS client authentication too.
1572 Not compiled unless enable-capieng specified to Configure.
1574 This work was sponsored by Logica.
1577 *) Fix bug in X509_ATTRIBUTE creation: dont set attribute using
1578 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
1579 attribute creation routines such as certifcate requests and PKCS#12
1583 Changes between 0.9.8g and 0.9.8h [28 May 2008]
1585 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
1586 handshake which could lead to a cilent crash as found using the
1587 Codenomicon TLS test suite (CVE-2008-1672)
1588 [Steve Henson, Mark Cox]
1590 *) Fix double free in TLS server name extensions which could lead to
1591 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
1594 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
1596 Clear the error queue to ensure that error entries left from
1597 older function calls do not interfere with the correct operation.
1598 [Lutz Jaenicke, Erik de Castro Lopo]
1600 *) Remove root CA certificates of commercial CAs:
1602 The OpenSSL project does not recommend any specific CA and does not
1603 have any policy with respect to including or excluding any CA.
1604 Therefore it does not make any sense to ship an arbitrary selection
1605 of root CA certificates with the OpenSSL software.
1608 *) RSA OAEP patches to fix two separate invalid memory reads.
1609 The first one involves inputs when 'lzero' is greater than
1610 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
1611 before the beginning of from). The second one involves inputs where
1612 the 'db' section contains nothing but zeroes (there is a one-byte
1613 invalid read after the end of 'db').
1614 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1616 *) Partial backport from 0.9.9-dev:
1618 Introduce bn_mul_mont (dedicated Montgomery multiplication
1619 procedure) as a candidate for BIGNUM assembler implementation.
1620 While 0.9.9-dev uses assembler for various architectures, only
1621 x86_64 is available by default here in the 0.9.8 branch, and
1622 32-bit x86 is available through a compile-time setting.
1624 To try the 32-bit x86 assembler implementation, use Configure
1625 option "enable-montasm" (which exists only for this backport).
1627 As "enable-montasm" for 32-bit x86 disclaims code stability
1628 anyway, in this constellation we activate additional code
1629 backported from 0.9.9-dev for further performance improvements,
1630 namely BN_from_montgomery_word. (To enable this otherwise,
1631 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
1633 [Andy Polyakov (backport partially by Bodo Moeller)]
1635 *) Add TLS session ticket callback. This allows an application to set
1636 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
1637 values. This is useful for key rollover for example where several key
1638 sets may exist with different names.
1641 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
1642 This was broken until now in 0.9.8 releases, such that the only way
1643 a registered ENGINE could be used (assuming it initialises
1644 successfully on the host) was to explicitly set it as the default
1645 for the relevant algorithms. This is in contradiction with 0.9.7
1646 behaviour and the documentation. With this fix, when an ENGINE is
1647 registered into a given algorithm's table of implementations, the
1648 'uptodate' flag is reset so that auto-discovery will be used next
1649 time a new context for that algorithm attempts to select an
1651 [Ian Lister (tweaked by Geoff Thorpe)]
1653 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
1654 implemention in the following ways:
1656 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
1659 Lack of BER streaming support means one pass streaming processing is
1660 only supported if data is detached: setting the streaming flag is
1661 ignored for embedded content.
1663 CMS support is disabled by default and must be explicitly enabled
1664 with the enable-cms configuration option.
1667 *) Update the GMP engine glue to do direct copies between BIGNUM and
1668 mpz_t when openssl and GMP use the same limb size. Otherwise the
1669 existing "conversion via a text string export" trick is still used.
1670 [Paul Sheer <paulsheer@gmail.com>]
1672 *) Zlib compression BIO. This is a filter BIO which compressed and
1673 uncompresses any data passed through it.
1676 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
1677 RFC3394 compatible AES key wrapping.
1680 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
1681 sets string data without copying. X509_ALGOR_set0() and
1682 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
1683 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
1684 from an X509_ATTRIBUTE structure optionally checking it occurs only
1685 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
1689 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
1690 to get the expected BN_FLG_CONSTTIME behavior.
1691 [Bodo Moeller (Google)]
1695 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
1696 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
1697 - added some more tests to do_tests.pl
1698 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
1699 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
1700 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
1701 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
1702 - various changes to netware.pl to enable gcc-cross builds on Win32
1704 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
1705 - various changes to fix missing prototype warnings
1706 - fixed x86nasm.pl to create correct asm files for NASM COFF output
1707 - added AES, WHIRLPOOL and CPUID assembler code to build files
1708 - added missing AES assembler make rules to mk1mf.pl
1709 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
1710 [Guenter Knauf <eflash@gmx.net>]
1712 *) Implement certificate status request TLS extension defined in RFC3546.
1713 A client can set the appropriate parameters and receive the encoded
1714 OCSP response via a callback. A server can query the supplied parameters
1715 and set the encoded OCSP response in the callback. Add simplified examples
1716 to s_client and s_server.
1719 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
1721 *) Fix various bugs:
1722 + Binary incompatibility of ssl_ctx_st structure
1723 + DTLS interoperation with non-compliant servers
1724 + Don't call get_session_cb() without proposed session
1725 + Fix ia64 assembler code
1726 [Andy Polyakov, Steve Henson]
1728 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
1730 *) DTLS Handshake overhaul. There were longstanding issues with
1731 OpenSSL DTLS implementation, which were making it impossible for
1732 RFC 4347 compliant client to communicate with OpenSSL server.
1733 Unfortunately just fixing these incompatibilities would "cut off"
1734 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
1735 server keeps tolerating non RFC compliant syntax. The opposite is
1736 not true, 0.9.8f client can not communicate with earlier server.
1737 This update even addresses CVE-2007-4995.
1740 *) Changes to avoid need for function casts in OpenSSL: some compilers
1741 (gcc 4.2 and later) reject their use.
1742 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
1745 *) Add RFC4507 support to OpenSSL. This includes the corrections in
1746 RFC4507bis. The encrypted ticket format is an encrypted encoded
1747 SSL_SESSION structure, that way new session features are automatically
1750 If a client application caches session in an SSL_SESSION structure
1751 support is transparent because tickets are now stored in the encoded
1754 The SSL_CTX structure automatically generates keys for ticket
1755 protection in servers so again support should be possible
1756 with no application modification.
1758 If a client or server wishes to disable RFC4507 support then the option
1759 SSL_OP_NO_TICKET can be set.
1761 Add a TLS extension debugging callback to allow the contents of any client
1762 or server extensions to be examined.
1764 This work was sponsored by Google.
1767 *) Add initial support for TLS extensions, specifically for the server_name
1768 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1769 have new members for a host name. The SSL data structure has an
1770 additional member SSL_CTX *initial_ctx so that new sessions can be
1771 stored in that context to allow for session resumption, even after the
1772 SSL has been switched to a new SSL_CTX in reaction to a client's
1773 server_name extension.
1775 New functions (subject to change):
1777 SSL_get_servername()
1778 SSL_get_servername_type()
1781 New CTRL codes and macros (subject to change):
1783 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1784 - SSL_CTX_set_tlsext_servername_callback()
1785 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1786 - SSL_CTX_set_tlsext_servername_arg()
1787 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1789 openssl s_client has a new '-servername ...' option.
1791 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1792 '-key2 ...', '-servername_fatal' (subject to change). This allows
1793 testing the HostName extension for a specific single host name ('-cert'
1794 and '-key' remain fallbacks for handshakes without HostName
1795 negotiation). If the unrecogninzed_name alert has to be sent, this by
1796 default is a warning; it becomes fatal with the '-servername_fatal'
1799 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
1801 *) Add AES and SSE2 assembly language support to VC++ build.
1804 *) Mitigate attack on final subtraction in Montgomery reduction.
1807 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
1808 (which previously caused an internal error).
1811 *) Squeeze another 10% out of IGE mode when in != out.
1814 *) AES IGE mode speedup.
1815 [Dean Gaudet (Google)]
1817 *) Add the Korean symmetric 128-bit cipher SEED (see
1818 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
1819 add SEED ciphersuites from RFC 4162:
1821 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
1822 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
1823 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
1824 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
1826 To minimize changes between patchlevels in the OpenSSL 0.9.8
1827 series, SEED remains excluded from compilation unless OpenSSL
1828 is configured with 'enable-seed'.
1829 [KISA, Bodo Moeller]
1831 *) Mitigate branch prediction attacks, which can be practical if a
1832 single processor is shared, allowing a spy process to extract
1833 information. For detailed background information, see
1834 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
1835 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
1836 and Necessary Software Countermeasures"). The core of the change
1837 are new versions BN_div_no_branch() and
1838 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
1839 respectively, which are slower, but avoid the security-relevant
1840 conditional branches. These are automatically called by BN_div()
1841 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
1842 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
1843 remove a conditional branch.
1845 BN_FLG_CONSTTIME is the new name for the previous
1846 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
1847 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
1848 in the exponent causes BN_mod_exp_mont() to use the alternative
1849 implementation in BN_mod_exp_mont_consttime().) The old name
1850 remains as a deprecated alias.
1852 Similary, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
1853 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
1854 constant-time implementations for more than just exponentiation.
1855 Here too the old name is kept as a deprecated alias.
1857 BN_BLINDING_new() will now use BN_dup() for the modulus so that
1858 the BN_BLINDING structure gets an independent copy of the
1859 modulus. This means that the previous "BIGNUM *m" argument to
1860 BN_BLINDING_new() and to BN_BLINDING_create_param() now
1861 essentially becomes "const BIGNUM *m", although we can't actually
1862 change this in the header file before 0.9.9. It allows
1863 RSA_setup_blinding() to use BN_with_flags() on the modulus to
1864 enable BN_FLG_CONSTTIME.
1866 [Matthew D Wood (Intel Corp)]
1868 *) In the SSL/TLS server implementation, be strict about session ID
1869 context matching (which matters if an application uses a single
1870 external cache for different purposes). Previously,
1871 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
1872 set. This did ensure strict client verification, but meant that,
1873 with applications using a single external cache for quite
1874 different requirements, clients could circumvent ciphersuite
1875 restrictions for a given session ID context by starting a session
1876 in a different context.
1879 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
1880 a ciphersuite string such as "DEFAULT:RSA" cannot enable
1881 authentication-only ciphersuites.
1884 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
1885 not complete and could lead to a possible single byte overflow
1886 (CVE-2007-5135) [Ben Laurie]
1888 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
1890 *) Since AES128 and AES256 (and similarly Camellia128 and
1891 Camellia256) share a single mask bit in the logic of
1892 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
1893 kludge to work properly if AES128 is available and AES256 isn't
1894 (or if Camellia128 is available and Camellia256 isn't).
1897 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
1898 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
1899 When a point or a seed is encoded in a BIT STRING, we need to
1900 prevent the removal of trailing zero bits to get the proper DER
1901 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
1902 of a NamedBitList, for which trailing 0 bits need to be removed.)
1905 *) Have SSL/TLS server implementation tolerate "mismatched" record
1906 protocol version while receiving ClientHello even if the
1907 ClientHello is fragmented. (The server can't insist on the
1908 particular protocol version it has chosen before the ServerHello
1909 message has informed the client about his choice.)
1912 *) Add RFC 3779 support.
1913 [Rob Austein for ARIN, Ben Laurie]
1915 *) Load error codes if they are not already present instead of using a
1916 static variable. This allows them to be cleanly unloaded and reloaded.
1917 Improve header file function name parsing.
1920 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
1921 or CAPABILITY handshake as required by RFCs.
1924 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
1926 *) Introduce limits to prevent malicious keys being able to
1927 cause a denial of service. (CVE-2006-2940)
1928 [Steve Henson, Bodo Moeller]
1930 *) Fix ASN.1 parsing of certain invalid structures that can result
1931 in a denial of service. (CVE-2006-2937) [Steve Henson]
1933 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
1934 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
1936 *) Fix SSL client code which could crash if connecting to a
1937 malicious SSLv2 server. (CVE-2006-4343)
1938 [Tavis Ormandy and Will Drewry, Google Security Team]
1940 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
1941 match only those. Before that, "AES256-SHA" would be interpreted
1942 as a pattern and match "AES128-SHA" too (since AES128-SHA got
1943 the same strength classification in 0.9.7h) as we currently only
1944 have a single AES bit in the ciphersuite description bitmap.
1945 That change, however, also applied to ciphersuite strings such as
1946 "RC4-MD5" that intentionally matched multiple ciphersuites --
1947 namely, SSL 2.0 ciphersuites in addition to the more common ones
1948 from SSL 3.0/TLS 1.0.
1950 So we change the selection algorithm again: Naming an explicit
1951 ciphersuite selects this one ciphersuite, and any other similar
1952 ciphersuite (same bitmap) from *other* protocol versions.
1953 Thus, "RC4-MD5" again will properly select both the SSL 2.0
1954 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
1956 Since SSL 2.0 does not have any ciphersuites for which the
1957 128/256 bit distinction would be relevant, this works for now.
1958 The proper fix will be to use different bits for AES128 and
1959 AES256, which would have avoided the problems from the beginning;
1960 however, bits are scarce, so we can only do this in a new release
1961 (not just a patchlevel) when we can change the SSL_CIPHER
1962 definition to split the single 'unsigned long mask' bitmap into
1963 multiple values to extend the available space.
1967 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
1969 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
1970 (CVE-2006-4339) [Ben Laurie and Google Security Team]
1972 *) Add AES IGE and biIGE modes.
1975 *) Change the Unix randomness entropy gathering to use poll() when
1976 possible instead of select(), since the latter has some
1977 undesirable limitations.
1978 [Darryl Miles via Richard Levitte and Bodo Moeller]
1980 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
1981 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
1982 cannot be implicitly activated as part of, e.g., the "AES" alias.
1983 However, please upgrade to OpenSSL 0.9.9[-dev] for
1984 non-experimental use of the ECC ciphersuites to get TLS extension
1985 support, which is required for curve and point format negotiation
1986 to avoid potential handshake problems.
1989 *) Disable rogue ciphersuites:
1991 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
1992 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
1993 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
1995 The latter two were purportedly from
1996 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
1999 Also deactivate the remaining ciphersuites from
2000 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
2001 unofficial, and the ID has long expired.
2004 *) Fix RSA blinding Heisenbug (problems sometimes occured on
2005 dual-core machines) and other potential thread-safety issues.
2008 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
2009 versions), which is now available for royalty-free use
2010 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
2011 Also, add Camellia TLS ciphersuites from RFC 4132.
2013 To minimize changes between patchlevels in the OpenSSL 0.9.8
2014 series, Camellia remains excluded from compilation unless OpenSSL
2015 is configured with 'enable-camellia'.
2018 *) Disable the padding bug check when compression is in use. The padding
2019 bug check assumes the first packet is of even length, this is not
2020 necessarily true if compresssion is enabled and can result in false
2021 positives causing handshake failure. The actual bug test is ancient
2022 code so it is hoped that implementations will either have fixed it by
2023 now or any which still have the bug do not support compression.
2026 Changes between 0.9.8a and 0.9.8b [04 May 2006]
2028 *) When applying a cipher rule check to see if string match is an explicit
2029 cipher suite and only match that one cipher suite if it is.
2032 *) Link in manifests for VC++ if needed.
2033 [Austin Ziegler <halostatue@gmail.com>]
2035 *) Update support for ECC-based TLS ciphersuites according to
2036 draft-ietf-tls-ecc-12.txt with proposed changes (but without
2037 TLS extensions, which are supported starting with the 0.9.9
2038 branch, not in the OpenSSL 0.9.8 branch).
2041 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
2042 opaque EVP_CIPHER_CTX handling.
2045 *) Fixes and enhancements to zlib compression code. We now only use
2046 "zlib1.dll" and use the default __cdecl calling convention on Win32
2047 to conform with the standards mentioned here:
2048 http://www.zlib.net/DLL_FAQ.txt
2049 Static zlib linking now works on Windows and the new --with-zlib-include
2050 --with-zlib-lib options to Configure can be used to supply the location
2051 of the headers and library. Gracefully handle case where zlib library
2055 *) Several fixes and enhancements to the OID generation code. The old code
2056 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
2057 handle numbers larger than ULONG_MAX, truncated printing and had a
2058 non standard OBJ_obj2txt() behaviour.
2061 *) Add support for building of engines under engine/ as shared libraries
2062 under VC++ build system.
2065 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
2066 Hopefully, we will not see any false combination of paths any more.
2069 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
2071 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
2072 (part of SSL_OP_ALL). This option used to disable the
2073 countermeasure against man-in-the-middle protocol-version
2074 rollback in the SSL 2.0 server implementation, which is a bad
2075 idea. (CVE-2005-2969)
2077 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
2078 for Information Security, National Institute of Advanced Industrial
2079 Science and Technology [AIST], Japan)]
2081 *) Add two function to clear and return the verify parameter flags.
2084 *) Keep cipherlists sorted in the source instead of sorting them at
2085 runtime, thus removing the need for a lock.
2088 *) Avoid some small subgroup attacks in Diffie-Hellman.
2089 [Nick Mathewson and Ben Laurie]
2091 *) Add functions for well-known primes.
2094 *) Extended Windows CE support.
2095 [Satoshi Nakamura and Andy Polyakov]
2097 *) Initialize SSL_METHOD structures at compile time instead of during
2098 runtime, thus removing the need for a lock.
2101 *) Make PKCS7_decrypt() work even if no certificate is supplied by
2102 attempting to decrypt each encrypted key in turn. Add support to
2106 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
2108 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
2111 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
2114 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
2115 key into the same file any more.
2118 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
2121 *) Add -utf8 command line and config file option to 'ca'.
2122 [Stefan <stf@udoma.org]
2124 *) Removed the macro des_crypt(), as it seems to conflict with some
2125 libraries. Use DES_crypt().
2128 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
2129 involves renaming the source and generated shared-libs for
2130 both. The engines will accept the corrected or legacy ids
2131 ('ncipher' and '4758_cca' respectively) when binding. NB,
2132 this only applies when building 'shared'.
2133 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
2135 *) Add attribute functions to EVP_PKEY structure. Modify
2136 PKCS12_create() to recognize a CSP name attribute and
2137 use it. Make -CSP option work again in pkcs12 utility.
2140 *) Add new functionality to the bn blinding code:
2141 - automatic re-creation of the BN_BLINDING parameters after
2142 a fixed number of uses (currently 32)
2143 - add new function for parameter creation
2144 - introduce flags to control the update behaviour of the
2145 BN_BLINDING parameters
2146 - hide BN_BLINDING structure
2147 Add a second BN_BLINDING slot to the RSA structure to improve
2148 performance when a single RSA object is shared among several
2152 *) Add support for DTLS.
2153 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
2155 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
2156 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
2159 *) Remove buggy and incompletet DH cert support from
2160 ssl/ssl_rsa.c and ssl/s3_both.c
2163 *) Use SHA-1 instead of MD5 as the default digest algorithm for
2164 the apps/openssl applications.
2167 *) Compile clean with "-Wall -Wmissing-prototypes
2168 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
2169 DEBUG_SAFESTACK must also be set.
2172 *) Change ./Configure so that certain algorithms can be disabled by default.
2173 The new counterpiece to "no-xxx" is "enable-xxx".
2175 The patented RC5 and MDC2 algorithms will now be disabled unless
2176 "enable-rc5" and "enable-mdc2", respectively, are specified.
2178 (IDEA remains enabled despite being patented. This is because IDEA
2179 is frequently required for interoperability, and there is no license
2180 fee for non-commercial use. As before, "no-idea" can be used to
2181 avoid this algorithm.)
2185 *) Add processing of proxy certificates (see RFC 3820). This work was
2186 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
2187 EGEE (Enabling Grids for E-science in Europe).
2190 *) RC4 performance overhaul on modern architectures/implementations, such
2191 as Intel P4, IA-64 and AMD64.
2194 *) New utility extract-section.pl. This can be used specify an alternative
2195 section number in a pod file instead of having to treat each file as
2196 a separate case in Makefile. This can be done by adding two lines to the
2199 =for comment openssl_section:XXX
2201 The blank line is mandatory.
2205 *) New arguments -certform, -keyform and -pass for s_client and s_server
2206 to allow alternative format key and certificate files and passphrase
2210 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
2211 update associated structures and add various utility functions.
2213 Add new policy related verify parameters, include policy checking in
2214 standard verify code. Enhance 'smime' application with extra parameters
2215 to support policy checking and print out.
2218 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
2219 Nehemiah processors. These extensions support AES encryption in hardware
2220 as well as RNG (though RNG support is currently disabled).
2221 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
2223 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
2226 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
2227 [Andy Polyakov and a number of other people]
2229 *) Improved PowerPC platform support. Most notably BIGNUM assembler
2230 implementation contributed by IBM.
2231 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
2233 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
2234 exponent rather than 'unsigned long'. There is a corresponding change to
2235 the new 'rsa_keygen' element of the RSA_METHOD structure.
2236 [Jelte Jansen, Geoff Thorpe]
2238 *) Functionality for creating the initial serial number file is now
2239 moved from CA.pl to the 'ca' utility with a new option -create_serial.
2241 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
2242 number file to 1, which is bound to cause problems. To avoid
2243 the problems while respecting compatibility between different 0.9.7
2244 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
2245 CA.pl for serial number initialization. With the new release 0.9.8,
2246 we can fix the problem directly in the 'ca' utility.)
2249 *) Reduced header interdepencies by declaring more opaque objects in
2250 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
2251 give fewer recursive includes, which could break lazy source code - so
2252 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
2253 developers should define this symbol when building and using openssl to
2254 ensure they track the recommended behaviour, interfaces, [etc], but
2255 backwards-compatible behaviour prevails when this isn't defined.
2258 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
2261 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
2262 This will generate a random key of the appropriate length based on the
2263 cipher context. The EVP_CIPHER can provide its own random key generation
2264 routine to support keys of a specific form. This is used in the des and
2265 3des routines to generate a key of the correct parity. Update S/MIME
2266 code to use new functions and hence generate correct parity DES keys.
2267 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
2268 valid (weak or incorrect parity).
2271 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
2272 as looking them up. This is useful when the verified structure may contain
2273 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
2274 present unless the new PKCS7_NO_CRL flag is asserted.
2277 *) Extend ASN1 oid configuration module. It now additionally accepts the
2280 shortName = some long name, 1.2.3.4
2283 *) Reimplemented the BN_CTX implementation. There is now no more static
2284 limitation on the number of variables it can handle nor the depth of the
2285 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
2286 information can now expand as required, and rather than having a single
2287 static array of bignums, BN_CTX now uses a linked-list of such arrays
2288 allowing it to expand on demand whilst maintaining the usefulness of
2289 BN_CTX's "bundling".
2292 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
2293 to allow all RSA operations to function using a single BN_CTX.
2296 *) Preliminary support for certificate policy evaluation and checking. This
2297 is initially intended to pass the tests outlined in "Conformance Testing
2298 of Relying Party Client Certificate Path Processing Logic" v1.07.
2301 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
2302 remained unused and not that useful. A variety of other little bignum
2303 tweaks and fixes have also been made continuing on from the audit (see
2307 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
2308 associated ASN1, EVP and SSL functions and old ASN1 macros.
2311 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
2312 and this should never fail. So the return value from the use of
2313 BN_set_word() (which can fail due to needless expansion) is now deprecated;
2314 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
2317 *) BN_CTX_get() should return zero-valued bignums, providing the same
2318 initialised value as BN_new().
2319 [Geoff Thorpe, suggested by Ulf Möller]
2321 *) Support for inhibitAnyPolicy certificate extension.
2324 *) An audit of the BIGNUM code is underway, for which debugging code is
2325 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
2326 is considered valid when processing BIGNUMs, and causes execution to
2327 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
2328 further steps are taken to deliberately pollute unused data in BIGNUM
2329 structures to try and expose faulty code further on. For now, openssl will
2330 (in its default mode of operation) continue to tolerate the inconsistent
2331 forms that it has tolerated in the past, but authors and packagers should
2332 consider trying openssl and their own applications when compiled with
2333 these debugging symbols defined. It will help highlight potential bugs in
2334 their own code, and will improve the test coverage for OpenSSL itself. At
2335 some point, these tighter rules will become openssl's default to improve
2336 maintainability, though the assert()s and other overheads will remain only
2337 in debugging configurations. See bn.h for more details.
2338 [Geoff Thorpe, Nils Larsch, Ulf Möller]
2340 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
2341 that can only be obtained through BN_CTX_new() (which implicitly
2342 initialises it). The presence of this function only made it possible
2343 to overwrite an existing structure (and cause memory leaks).
2346 *) Because of the callback-based approach for implementing LHASH as a
2347 template type, lh_insert() adds opaque objects to hash-tables and
2348 lh_doall() or lh_doall_arg() are typically used with a destructor callback
2349 to clean up those corresponding objects before destroying the hash table
2350 (and losing the object pointers). So some over-zealous constifications in
2351 LHASH have been relaxed so that lh_insert() does not take (nor store) the
2352 objects as "const" and the lh_doall[_arg] callback wrappers are not
2353 prototyped to have "const" restrictions on the object pointers they are
2354 given (and so aren't required to cast them away any more).
2357 *) The tmdiff.h API was so ugly and minimal that our own timing utility
2358 (speed) prefers to use its own implementation. The two implementations
2359 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
2360 its object type properly exposed (MS_TM) instead of casting to/from "char
2361 *". This may still change yet if someone realises MS_TM and "ms_time_***"
2362 aren't necessarily the greatest nomenclatures - but this is what was used
2363 internally to the implementation so I've used that for now.
2366 *) Ensure that deprecated functions do not get compiled when
2367 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
2368 the self-tests were still using deprecated key-generation functions so
2369 these have been updated also.
2372 *) Reorganise PKCS#7 code to separate the digest location functionality
2373 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
2374 New function PKCS7_set_digest() to set the digest type for PKCS#7
2375 digestedData type. Add additional code to correctly generate the
2376 digestedData type and add support for this type in PKCS7 initialization
2380 *) New function PKCS7_set0_type_other() this initializes a PKCS7
2381 structure of type "other".
2384 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
2385 sure the loop does correctly stop and breaking ("division by zero")
2386 modulus operations are not performed. The (pre-generated) prime
2387 table crypto/bn/bn_prime.h was already correct, but it could not be
2388 re-generated on some platforms because of the "division by zero"
2389 situation in the script.
2390 [Ralf S. Engelschall]
2392 *) Update support for ECC-based TLS ciphersuites according to
2393 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
2394 SHA-1 now is only used for "small" curves (where the
2395 representation of a field element takes up to 24 bytes); for
2396 larger curves, the field element resulting from ECDH is directly
2397 used as premaster secret.
2398 [Douglas Stebila (Sun Microsystems Laboratories)]
2400 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
2401 curve secp160r1 to the tests.
2402 [Douglas Stebila (Sun Microsystems Laboratories)]
2404 *) Add the possibility to load symbols globally with DSO.
2405 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
2407 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
2408 control of the error stack.
2411 *) Add support for STORE in ENGINE.
2414 *) Add the STORE type. The intention is to provide a common interface
2415 to certificate and key stores, be they simple file-based stores, or
2416 HSM-type store, or LDAP stores, or...
2417 NOTE: The code is currently UNTESTED and isn't really used anywhere.
2420 *) Add a generic structure called OPENSSL_ITEM. This can be used to
2421 pass a list of arguments to any function as well as provide a way
2422 for a function to pass data back to the caller.
2425 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
2426 works like BUF_strdup() but can be used to duplicate a portion of
2427 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
2431 *) Add the function sk_find_ex() which works like sk_find(), but will
2432 return an index to an element even if an exact match couldn't be
2433 found. The index is guaranteed to point at the element where the
2434 searched-for key would be inserted to preserve sorting order.
2437 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
2438 takes an extra flags argument for optional functionality. Currently,
2439 the following flags are defined:
2441 OBJ_BSEARCH_VALUE_ON_NOMATCH
2442 This one gets OBJ_bsearch_ex() to return a pointer to the first
2443 element where the comparing function returns a negative or zero
2446 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
2447 This one gets OBJ_bsearch_ex() to return a pointer to the first
2448 element where the comparing function returns zero. This is useful
2449 if there are more than one element where the comparing function
2453 *) Make it possible to create self-signed certificates with 'openssl ca'
2454 in such a way that the self-signed certificate becomes part of the
2455 CA database and uses the same mechanisms for serial number generation
2456 as all other certificate signing. The new flag '-selfsign' enables
2457 this functionality. Adapt CA.sh and CA.pl.in.
2460 *) Add functionality to check the public key of a certificate request
2461 against a given private. This is useful to check that a certificate
2462 request can be signed by that key (self-signing).
2465 *) Make it possible to have multiple active certificates with the same
2466 subject in the CA index file. This is done only if the keyword
2467 'unique_subject' is set to 'no' in the main CA section (default
2468 if 'CA_default') of the configuration file. The value is saved
2469 with the database itself in a separate index attribute file,
2470 named like the index file with '.attr' appended to the name.
2473 *) Generate muti valued AVAs using '+' notation in config files for
2477 *) Support for nameConstraints certificate extension.
2480 *) Support for policyConstraints certificate extension.
2483 *) Support for policyMappings certificate extension.
2486 *) Make sure the default DSA_METHOD implementation only uses its
2487 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
2488 and change its own handlers to be NULL so as to remove unnecessary
2489 indirection. This lets alternative implementations fallback to the
2490 default implementation more easily.
2493 *) Support for directoryName in GeneralName related extensions
2497 *) Make it possible to link applications using Makefile.shared.
2498 Make that possible even when linking against static libraries!
2501 *) Support for single pass processing for S/MIME signing. This now
2502 means that S/MIME signing can be done from a pipe, in addition
2503 cleartext signing (multipart/signed type) is effectively streaming
2504 and the signed data does not need to be all held in memory.
2506 This is done with a new flag PKCS7_STREAM. When this flag is set
2507 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
2508 is done after the data is output (and digests calculated) in
2509 SMIME_write_PKCS7().
2512 *) Add full support for -rpath/-R, both in shared libraries and
2513 applications, at least on the platforms where it's known how
2517 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
2518 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
2519 will now compute a table of multiples of the generator that
2520 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
2521 faster (notably in the case of a single point multiplication,
2522 scalar * generator).
2523 [Nils Larsch, Bodo Moeller]
2525 *) IPv6 support for certificate extensions. The various extensions
2526 which use the IP:a.b.c.d can now take IPv6 addresses using the
2527 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
2531 *) Added an ENGINE that implements RSA by performing private key
2532 exponentiations with the GMP library. The conversions to and from
2533 GMP's mpz_t format aren't optimised nor are any montgomery forms
2534 cached, and on x86 it appears OpenSSL's own performance has caught up.
2535 However there are likely to be other architectures where GMP could
2536 provide a boost. This ENGINE is not built in by default, but it can be
2537 specified at Configure time and should be accompanied by the necessary
2538 linker additions, eg;
2539 ./config -DOPENSSL_USE_GMP -lgmp
2542 *) "openssl engine" will not display ENGINE/DSO load failure errors when
2543 testing availability of engines with "-t" - the old behaviour is
2544 produced by increasing the feature's verbosity with "-tt".
2547 *) ECDSA routines: under certain error conditions uninitialized BN objects
2548 could be freed. Solution: make sure initialization is performed early
2549 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
2553 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
2554 and DH_METHOD (eg. by ENGINE implementations) to override the normal
2555 software implementations. For DSA and DH, parameter generation can
2556 also be overriden by providing the appropriate method callbacks.
2559 *) Change the "progress" mechanism used in key-generation and
2560 primality testing to functions that take a new BN_GENCB pointer in
2561 place of callback/argument pairs. The new API functions have "_ex"
2562 postfixes and the older functions are reimplemented as wrappers for
2563 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
2564 declarations of the old functions to help (graceful) attempts to
2565 migrate to the new functions. Also, the new key-generation API
2566 functions operate on a caller-supplied key-structure and return
2567 success/failure rather than returning a key or NULL - this is to
2568 help make "keygen" another member function of RSA_METHOD etc.
2570 Example for using the new callback interface:
2572 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
2576 BN_GENCB_set(&my_cb, my_callback, my_arg);
2578 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
2579 /* For the meaning of a, b in calls to my_callback(), see the
2580 * documentation of the function that calls the callback.
2581 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
2582 * my_callback should return 1 if it wants BN_is_prime_ex()
2583 * to continue, or 0 to stop.
2588 *) Change the ZLIB compression method to be stateful, and make it
2589 available to TLS with the number defined in
2590 draft-ietf-tls-compression-04.txt.
2593 *) Add the ASN.1 structures and functions for CertificatePair, which
2594 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
2596 CertificatePair ::= SEQUENCE {
2597 forward [0] Certificate OPTIONAL,
2598 reverse [1] Certificate OPTIONAL,
2599 -- at least one of the pair shall be present -- }
2601 Also implement the PEM functions to read and write certificate
2602 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
2604 This needed to be defined, mostly for the sake of the LDAP
2605 attribute crossCertificatePair, but may prove useful elsewhere as
2609 *) Make it possible to inhibit symlinking of shared libraries in
2610 Makefile.shared, for Cygwin's sake.
2613 *) Extend the BIGNUM API by creating a function
2614 void BN_set_negative(BIGNUM *a, int neg);
2615 and a macro that behave like
2616 int BN_is_negative(const BIGNUM *a);
2618 to avoid the need to access 'a->neg' directly in applications.
2621 *) Implement fast modular reduction for pseudo-Mersenne primes
2622 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
2623 EC_GROUP_new_curve_GFp() will now automatically use this
2625 [Nils Larsch <nla@trustcenter.de>]
2627 *) Add new lock type (CRYPTO_LOCK_BN).
2630 *) Change the ENGINE framework to automatically load engines
2631 dynamically from specific directories unless they could be
2632 found to already be built in or loaded. Move all the
2633 current engines except for the cryptodev one to a new
2635 The engines in engines/ are built as shared libraries if
2636 the "shared" options was given to ./Configure or ./config.
2637 Otherwise, they are inserted in libcrypto.a.
2638 /usr/local/ssl/engines is the default directory for dynamic
2639 engines, but that can be overriden at configure time through
2640 the usual use of --prefix and/or --openssldir, and at run
2641 time with the environment variable OPENSSL_ENGINES.
2642 [Geoff Thorpe and Richard Levitte]
2644 *) Add Makefile.shared, a helper makefile to build shared
2645 libraries. Addapt Makefile.org.
2648 *) Add version info to Win32 DLLs.
2649 [Peter 'Luna' Runestig" <peter@runestig.com>]
2651 *) Add new 'medium level' PKCS#12 API. Certificates and keys
2652 can be added using this API to created arbitrary PKCS#12
2653 files while avoiding the low level API.
2655 New options to PKCS12_create(), key or cert can be NULL and
2656 will then be omitted from the output file. The encryption
2657 algorithm NIDs can be set to -1 for no encryption, the mac
2658 iteration count can be set to 0 to omit the mac.
2660 Enhance pkcs12 utility by making the -nokeys and -nocerts
2661 options work when creating a PKCS#12 file. New option -nomac
2662 to omit the mac, NONE can be set for an encryption algorithm.
2663 New code is modified to use the enhanced PKCS12_create()
2664 instead of the low level API.
2667 *) Extend ASN1 encoder to support indefinite length constructed
2668 encoding. This can output sequences tags and octet strings in
2669 this form. Modify pk7_asn1.c to support indefinite length
2670 encoding. This is experimental and needs additional code to
2671 be useful, such as an ASN1 bio and some enhanced streaming
2674 Extend template encode functionality so that tagging is passed
2675 down to the template encoder.
2678 *) Let 'openssl req' fail if an argument to '-newkey' is not
2679 recognized instead of using RSA as a default.
2682 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
2683 As these are not official, they are not included in "ALL";
2684 the "ECCdraft" ciphersuite group alias can be used to select them.
2685 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
2687 *) Add ECDH engine support.
2688 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
2690 *) Add ECDH in new directory crypto/ecdh/.
2691 [Douglas Stebila (Sun Microsystems Laboratories)]
2693 *) Let BN_rand_range() abort with an error after 100 iterations
2694 without success (which indicates a broken PRNG).
2697 *) Change BN_mod_sqrt() so that it verifies that the input value
2698 is really the square of the return value. (Previously,
2699 BN_mod_sqrt would show GIGO behaviour.)
2702 *) Add named elliptic curves over binary fields from X9.62, SECG,
2703 and WAP/WTLS; add OIDs that were still missing.
2705 [Sheueling Chang Shantz and Douglas Stebila
2706 (Sun Microsystems Laboratories)]
2708 *) Extend the EC library for elliptic curves over binary fields
2709 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
2712 EC_GF2m_simple_method
2716 EC_GROUP_new_curve_GF2m
2717 EC_GROUP_set_curve_GF2m
2718 EC_GROUP_get_curve_GF2m
2719 EC_POINT_set_affine_coordinates_GF2m
2720 EC_POINT_get_affine_coordinates_GF2m
2721 EC_POINT_set_compressed_coordinates_GF2m
2723 Point compression for binary fields is disabled by default for
2724 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
2727 As binary polynomials are represented as BIGNUMs, various members
2728 of the EC_GROUP and EC_POINT data structures can be shared
2729 between the implementations for prime fields and binary fields;
2730 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
2731 are essentially identical to their ..._GFp counterparts.
2732 (For simplicity, the '..._GFp' prefix has been dropped from
2733 various internal method names.)
2735 An internal 'field_div' method (similar to 'field_mul' and
2736 'field_sqr') has been added; this is used only for binary fields.
2738 [Sheueling Chang Shantz and Douglas Stebila
2739 (Sun Microsystems Laboratories)]
2741 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
2742 through methods ('mul', 'precompute_mult').
2744 The generic implementations (now internally called 'ec_wNAF_mul'
2745 and 'ec_wNAF_precomputed_mult') remain the default if these
2746 methods are undefined.
2748 [Sheueling Chang Shantz and Douglas Stebila
2749 (Sun Microsystems Laboratories)]
2751 *) New function EC_GROUP_get_degree, which is defined through
2752 EC_METHOD. For curves over prime fields, this returns the bit
2753 length of the modulus.
2755 [Sheueling Chang Shantz and Douglas Stebila
2756 (Sun Microsystems Laboratories)]
2758 *) New functions EC_GROUP_dup, EC_POINT_dup.
2759 (These simply call ..._new and ..._copy).
2761 [Sheueling Chang Shantz and Douglas Stebila
2762 (Sun Microsystems Laboratories)]
2764 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
2765 Polynomials are represented as BIGNUMs (where the sign bit is not
2766 used) in the following functions [macros]:
2769 BN_GF2m_sub [= BN_GF2m_add]
2770 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
2771 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
2772 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
2774 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
2775 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
2776 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
2777 BN_GF2m_cmp [= BN_ucmp]
2779 (Note that only the 'mod' functions are actually for fields GF(2^m).
2780 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
2782 For some functions, an the irreducible polynomial defining a
2783 field can be given as an 'unsigned int[]' with strictly
2784 decreasing elements giving the indices of those bits that are set;
2785 i.e., p[] represents the polynomial
2786 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
2788 p[0] > p[1] > ... > p[k] = 0.
2789 This applies to the following functions:
2794 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
2795 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
2797 BN_GF2m_mod_sqrt_arr
2798 BN_GF2m_mod_solve_quad_arr
2802 Conversion can be performed by the following functions:
2807 bntest.c has additional tests for binary polynomial arithmetic.
2809 Two implementations for BN_GF2m_mod_div() are available.
2810 The default algorithm simply uses BN_GF2m_mod_inv() and
2811 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
2812 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
2813 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
2815 [Sheueling Chang Shantz and Douglas Stebila
2816 (Sun Microsystems Laboratories)]
2818 *) Add new error code 'ERR_R_DISABLED' that can be used when some
2819 functionality is disabled at compile-time.
2820 [Douglas Stebila <douglas.stebila@sun.com>]
2822 *) Change default behaviour of 'openssl asn1parse' so that more
2823 information is visible when viewing, e.g., a certificate:
2825 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
2826 mode the content of non-printable OCTET STRINGs is output in a
2827 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
2828 avoid the appearance of a printable string.
2829 [Nils Larsch <nla@trustcenter.de>]
2831 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
2833 EC_GROUP_set_asn1_flag()
2834 EC_GROUP_get_asn1_flag()
2835 EC_GROUP_set_point_conversion_form()
2836 EC_GROUP_get_point_conversion_form()
2837 These control ASN1 encoding details:
2838 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
2839 has been set to OPENSSL_EC_NAMED_CURVE.
2840 - Points are encoded in uncompressed form by default; options for
2841 asn1_for are as for point2oct, namely
2842 POINT_CONVERSION_COMPRESSED
2843 POINT_CONVERSION_UNCOMPRESSED
2844 POINT_CONVERSION_HYBRID
2846 Also add 'seed' and 'seed_len' members to EC_GROUP with access
2849 EC_GROUP_get0_seed()
2850 EC_GROUP_get_seed_len()
2851 This is used only for ASN1 purposes (so far).
2852 [Nils Larsch <nla@trustcenter.de>]
2854 *) Add 'field_type' member to EC_METHOD, which holds the NID
2855 of the appropriate field type OID. The new function
2856 EC_METHOD_get_field_type() returns this value.
2857 [Nils Larsch <nla@trustcenter.de>]
2862 EC_POINT_point2hex()
2863 EC_POINT_hex2point()
2864 providing useful interfaces to EC_POINT_point2oct() and
2865 EC_POINT_oct2point().
2866 [Nils Larsch <nla@trustcenter.de>]
2868 *) Change internals of the EC library so that the functions
2869 EC_GROUP_set_generator()
2870 EC_GROUP_get_generator()
2871 EC_GROUP_get_order()
2872 EC_GROUP_get_cofactor()
2873 are implemented directly in crypto/ec/ec_lib.c and not dispatched
2874 to methods, which would lead to unnecessary code duplication when
2875 adding different types of curves.
2876 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
2878 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
2879 arithmetic, and such that modified wNAFs are generated
2880 (which avoid length expansion in many cases).
2883 *) Add a function EC_GROUP_check_discriminant() (defined via
2884 EC_METHOD) that verifies that the curve discriminant is non-zero.
2886 Add a function EC_GROUP_check() that makes some sanity tests
2887 on a EC_GROUP, its generator and order. This includes
2888 EC_GROUP_check_discriminant().
2889 [Nils Larsch <nla@trustcenter.de>]
2891 *) Add ECDSA in new directory crypto/ecdsa/.
2893 Add applications 'openssl ecparam' and 'openssl ecdsa'
2894 (these are based on 'openssl dsaparam' and 'openssl dsa').
2896 ECDSA support is also included in various other files across the
2897 library. Most notably,
2898 - 'openssl req' now has a '-newkey ecdsa:file' option;
2899 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
2900 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
2901 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
2902 them suitable for ECDSA where domain parameters must be
2903 extracted before the specific public key;
2904 - ECDSA engine support has been added.
2905 [Nils Larsch <nla@trustcenter.de>]
2907 *) Include some named elliptic curves, and add OIDs from X9.62,
2908 SECG, and WAP/WTLS. Each curve can be obtained from the new
2910 EC_GROUP_new_by_curve_name(),
2911 and the list of available named curves can be obtained with
2912 EC_get_builtin_curves().
2913 Also add a 'curve_name' member to EC_GROUP objects, which can be
2915 EC_GROUP_set_curve_name()
2916 EC_GROUP_get_curve_name()
2917 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
2919 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
2920 was actually never needed) and in BN_mul(). The removal in BN_mul()
2921 required a small change in bn_mul_part_recursive() and the addition
2922 of the functions bn_cmp_part_words(), bn_sub_part_words() and
2923 bn_add_part_words(), which do the same thing as bn_cmp_words(),
2924 bn_sub_words() and bn_add_words() except they take arrays with
2928 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
2930 *) Cleanse PEM buffers before freeing them since they may contain
2932 [Benjamin Bennett <ben@psc.edu>]
2934 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
2935 a ciphersuite string such as "DEFAULT:RSA" cannot enable
2936 authentication-only ciphersuites.
2939 *) Since AES128 and AES256 share a single mask bit in the logic of
2940 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
2941 kludge to work properly if AES128 is available and AES256 isn't.
2944 *) Expand security boundary to match 1.1.1 module.
2947 *) Remove redundant features: hash file source, editing of test vectors
2948 modify fipsld to use external fips_premain.c signature.
2951 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
2952 run algorithm test programs.
2955 *) Make algorithm test programs more tolerant of whitespace.
2958 *) Have SSL/TLS server implementation tolerate "mismatched" record
2959 protocol version while receiving ClientHello even if the
2960 ClientHello is fragmented. (The server can't insist on the
2961 particular protocol version it has chosen before the ServerHello
2962 message has informed the client about his choice.)
2965 *) Load error codes if they are not already present instead of using a
2966 static variable. This allows them to be cleanly unloaded and reloaded.
2969 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
2971 *) Introduce limits to prevent malicious keys being able to
2972 cause a denial of service. (CVE-2006-2940)
2973 [Steve Henson, Bodo Moeller]
2975 *) Fix ASN.1 parsing of certain invalid structures that can result
2976 in a denial of service. (CVE-2006-2937) [Steve Henson]
2978 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
2979 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
2981 *) Fix SSL client code which could crash if connecting to a
2982 malicious SSLv2 server. (CVE-2006-4343)
2983 [Tavis Ormandy and Will Drewry, Google Security Team]
2985 *) Change ciphersuite string processing so that an explicit
2986 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
2987 will no longer include "AES128-SHA"), and any other similar
2988 ciphersuite (same bitmap) from *other* protocol versions (so that
2989 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
2990 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
2991 changes from 0.9.8b and 0.9.8d.
2994 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
2996 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
2997 (CVE-2006-4339) [Ben Laurie and Google Security Team]
2999 *) Change the Unix randomness entropy gathering to use poll() when
3000 possible instead of select(), since the latter has some
3001 undesirable limitations.
3002 [Darryl Miles via Richard Levitte and Bodo Moeller]
3004 *) Disable rogue ciphersuites:
3006 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
3007 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
3008 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
3010 The latter two were purportedly from
3011 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
3014 Also deactive the remaining ciphersuites from
3015 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
3016 unofficial, and the ID has long expired.
3019 *) Fix RSA blinding Heisenbug (problems sometimes occured on
3020 dual-core machines) and other potential thread-safety issues.
3023 Changes between 0.9.7i and 0.9.7j [04 May 2006]
3025 *) Adapt fipsld and the build system to link against the validated FIPS
3026 module in FIPS mode.
3029 *) Fixes for VC++ 2005 build under Windows.
3032 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
3033 from a Windows bash shell such as MSYS. It is autodetected from the
3034 "config" script when run from a VC++ environment. Modify standard VC++
3035 build to use fipscanister.o from the GNU make build.
3038 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
3040 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
3041 The value now differs depending on if you build for FIPS or not.
3042 BEWARE! A program linked with a shared FIPSed libcrypto can't be
3043 safely run with a non-FIPSed libcrypto, as it may crash because of
3044 the difference induced by this change.
3047 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
3049 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
3050 (part of SSL_OP_ALL). This option used to disable the
3051 countermeasure against man-in-the-middle protocol-version
3052 rollback in the SSL 2.0 server implementation, which is a bad
3053 idea. (CVE-2005-2969)
3055 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
3056 for Information Security, National Institute of Advanced Industrial
3057 Science and Technology [AIST], Japan)]
3059 *) Minimal support for X9.31 signatures and PSS padding modes. This is
3060 mainly for FIPS compliance and not fully integrated at this stage.
3063 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
3064 the exponentiation using a fixed-length exponent. (Otherwise,
3065 the information leaked through timing could expose the secret key
3066 after many signatures; cf. Bleichenbacher's attack on DSA with
3070 *) Make a new fixed-window mod_exp implementation the default for
3071 RSA, DSA, and DH private-key operations so that the sequence of
3072 squares and multiplies and the memory access pattern are
3073 independent of the particular secret key. This will mitigate
3074 cache-timing and potential related attacks.
3076 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
3077 and this is automatically used by BN_mod_exp_mont() if the new flag
3078 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
3079 will use this BN flag for private exponents unless the flag
3080 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
3081 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
3083 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
3085 *) Change the client implementation for SSLv23_method() and
3086 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
3087 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
3088 (Previously, the SSL 2.0 backwards compatible Client Hello
3089 message format would be used even with SSL_OP_NO_SSLv2.)
3092 *) Add support for smime-type MIME parameter in S/MIME messages which some
3096 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
3097 a threadsafe manner. Modify rsa code to use new function and add calls
3098 to dsa and dh code (which had race conditions before).
3101 *) Include the fixed error library code in the C error file definitions
3102 instead of fixing them up at runtime. This keeps the error code
3103 structures constant.
3106 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
3108 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
3111 *) Fixes for newer kerberos headers. NB: the casts are needed because
3112 the 'length' field is signed on one version and unsigned on another
3113 with no (?) obvious way to tell the difference, without these VC++
3114 complains. Also the "definition" of FAR (blank) is no longer included
3115 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
3116 some needed definitions.
3119 *) Undo Cygwin change.
3122 *) Added support for proxy certificates according to RFC 3820.
3123 Because they may be a security thread to unaware applications,
3124 they must be explicitely allowed in run-time. See
3125 docs/HOWTO/proxy_certificates.txt for further information.
3128 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
3130 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
3131 server and client random values. Previously
3132 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
3133 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
3135 This change has negligible security impact because:
3137 1. Server and client random values still have 24 bytes of pseudo random
3140 2. Server and client random values are sent in the clear in the initial
3143 3. The master secret is derived using the premaster secret (48 bytes in
3144 size for static RSA ciphersuites) as well as client server and random
3147 The OpenSSL team would like to thank the UK NISCC for bringing this issue
3150 [Stephen Henson, reported by UK NISCC]
3152 *) Use Windows randomness collection on Cygwin.
3155 *) Fix hang in EGD/PRNGD query when communication socket is closed
3156 prematurely by EGD/PRNGD.
3157 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
3159 *) Prompt for pass phrases when appropriate for PKCS12 input format.
3162 *) Back-port of selected performance improvements from development
3163 branch, as well as improved support for PowerPC platforms.
3166 *) Add lots of checks for memory allocation failure, error codes to indicate
3167 failure and freeing up memory if a failure occurs.
3168 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
3170 *) Add new -passin argument to dgst.
3173 *) Perform some character comparisons of different types in X509_NAME_cmp:
3174 this is needed for some certificates that reencode DNs into UTF8Strings
3175 (in violation of RFC3280) and can't or wont issue name rollover
3179 *) Make an explicit check during certificate validation to see that
3180 the CA setting in each certificate on the chain is correct. As a
3181 side effect always do the following basic checks on extensions,
3182 not just when there's an associated purpose to the check:
3184 - if there is an unhandled critical extension (unless the user
3185 has chosen to ignore this fault)
3186 - if the path length has been exceeded (if one is set at all)
3187 - that certain extensions fit the associated purpose (if one has
3191 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
3193 *) Avoid a race condition when CRLs are checked in a multi threaded
3194 environment. This would happen due to the reordering of the revoked
3195 entries during signature checking and serial number lookup. Now the
3196 encoding is cached and the serial number sort performed under a lock.
3197 Add new STACK function sk_is_sorted().
3200 *) Add Delta CRL to the extension code.
3203 *) Various fixes to s3_pkt.c so alerts are sent properly.
3204 [David Holmes <d.holmes@f5.com>]
3206 *) Reduce the chances of duplicate issuer name and serial numbers (in
3207 violation of RFC3280) using the OpenSSL certificate creation utilities.
3208 This is done by creating a random 64 bit value for the initial serial
3209 number when a serial number file is created or when a self signed
3210 certificate is created using 'openssl req -x509'. The initial serial
3211 number file is created using 'openssl x509 -next_serial' in CA.pl
3212 rather than being initialized to 1.
3215 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
3217 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3218 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3219 [Joe Orton, Steve Henson]
3221 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
3223 [Joe Orton, Steve Henson]
3225 *) Make it possible to have multiple active certificates with the same
3226 subject in the CA index file. This is done only if the keyword
3227 'unique_subject' is set to 'no' in the main CA section (default
3228 if 'CA_default') of the configuration file. The value is saved
3229 with the database itself in a separate index attribute file,
3230 named like the index file with '.attr' appended to the name.
3233 *) X509 verify fixes. Disable broken certificate workarounds when
3234 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
3235 keyUsage extension present. Don't accept CRLs with unhandled critical
3236 extensions: since verify currently doesn't process CRL extensions this
3237 rejects a CRL with *any* critical extensions. Add new verify error codes
3241 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
3242 A clarification of RFC2560 will require the use of OCTET STRINGs and
3243 some implementations cannot handle the current raw format. Since OpenSSL
3244 copies and compares OCSP nonces as opaque blobs without any attempt at
3245 parsing them this should not create any compatibility issues.
3248 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
3249 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
3250 this HMAC (and other) operations are several times slower than OpenSSL
3254 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
3255 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
3257 *) Use the correct content when signing type "other".
3260 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
3262 *) Fix various bugs revealed by running the NISCC test suite:
3264 Stop out of bounds reads in the ASN1 code when presented with
3265 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3267 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
3269 If verify callback ignores invalid public key errors don't try to check
3270 certificate signature with the NULL public key.
3274 *) New -ignore_err option in ocsp application to stop the server
3275 exiting on the first error in a request.
3278 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3279 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3283 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3284 extra data after the compression methods not only for TLS 1.0
3285 but also for SSL 3.0 (as required by the specification).
3286 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3288 *) Change X509_certificate_type() to mark the key as exported/exportable
3289 when it's 512 *bits* long, not 512 bytes.
3292 *) Change AES_cbc_encrypt() so it outputs exact multiple of
3293 blocks during encryption.
3296 *) Various fixes to base64 BIO and non blocking I/O. On write
3297 flushes were not handled properly if the BIO retried. On read
3298 data was not being buffered properly and had various logic bugs.
3299 This also affects blocking I/O when the data being decoded is a
3303 *) Various S/MIME bugfixes and compatibility changes:
3304 output correct application/pkcs7 MIME type if
3305 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
3306 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
3307 of files as .eml work). Correctly handle very long lines in MIME
3311 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
3313 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3314 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3315 a protocol version number mismatch like a decryption error
3316 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3319 *) Turn on RSA blinding by default in the default implementation
3320 to avoid a timing attack. Applications that don't want it can call
3321 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3322 They would be ill-advised to do so in most cases.
3323 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3325 *) Change RSA blinding code so that it works when the PRNG is not
3326 seeded (in this case, the secret RSA exponent is abused as
3327 an unpredictable seed -- if it is not unpredictable, there
3328 is no point in blinding anyway). Make RSA blinding thread-safe
3329 by remembering the creator's thread ID in rsa->blinding and
3330 having all other threads use local one-time blinding factors
3331 (this requires more computation than sharing rsa->blinding, but
3332 avoids excessive locking; and if an RSA object is not shared
3333 between threads, blinding will still be very fast).
3336 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
3337 ENGINE as defaults for all supported algorithms irrespective of
3338 the 'flags' parameter. 'flags' is now honoured, so applications
3339 should make sure they are passing it correctly.
3342 *) Target "mingw" now allows native Windows code to be generated in
3343 the Cygwin environment as well as with the MinGW compiler.
3346 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
3348 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3349 via timing by performing a MAC computation even if incorrrect
3350 block cipher padding has been found. This is a countermeasure
3351 against active attacks where the attacker has to distinguish
3352 between bad padding and a MAC verification error. (CVE-2003-0078)
3354 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3355 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3356 Martin Vuagnoux (EPFL, Ilion)]
3358 *) Make the no-err option work as intended. The intention with no-err
3359 is not to have the whole error stack handling routines removed from
3360 libcrypto, it's only intended to remove all the function name and
3361 reason texts, thereby removing some of the footprint that may not
3362 be interesting if those errors aren't displayed anyway.
3364 NOTE: it's still possible for any application or module to have it's
3365 own set of error texts inserted. The routines are there, just not
3366 used by default when no-err is given.
3369 *) Add support for FreeBSD on IA64.
3370 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
3372 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
3373 Kerberos function mit_des_cbc_cksum(). Before this change,
3374 the value returned by DES_cbc_cksum() was like the one from
3375 mit_des_cbc_cksum(), except the bytes were swapped.
3376 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
3378 *) Allow an application to disable the automatic SSL chain building.
3379 Before this a rather primitive chain build was always performed in
3380 ssl3_output_cert_chain(): an application had no way to send the
3381 correct chain if the automatic operation produced an incorrect result.
3383 Now the chain builder is disabled if either:
3385 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
3387 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
3389 The reasoning behind this is that an application would not want the
3390 auto chain building to take place if extra chain certificates are
3391 present and it might also want a means of sending no additional
3392 certificates (for example the chain has two certificates and the
3396 *) Add the possibility to build without the ENGINE framework.
3397 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3399 *) Under Win32 gmtime() can return NULL: check return value in
3400 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
3403 *) DSA routines: under certain error conditions uninitialized BN objects
3404 could be freed. Solution: make sure initialization is performed early
3405 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
3406 Nils Larsch <nla@trustcenter.de> via PR#459)
3409 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
3410 checked on reconnect on the client side, therefore session resumption
3411 could still fail with a "ssl session id is different" error. This
3412 behaviour is masked when SSL_OP_ALL is used due to
3413 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
3414 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3415 followup to PR #377.
3418 *) IA-32 assembler support enhancements: unified ELF targets, support
3419 for SCO/Caldera platforms, fix for Cygwin shared build.
3422 *) Add support for FreeBSD on sparc64. As a consequence, support for
3423 FreeBSD on non-x86 processors is separate from x86 processors on
3424 the config script, much like the NetBSD support.
3425 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
3427 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
3429 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
3432 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
3433 code (06) was taken as the first octet of the session ID and the last
3434 octet was ignored consequently. As a result SSLv2 client side session
3435 caching could not have worked due to the session ID mismatch between
3437 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3441 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
3442 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
3446 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
3447 seems that in spite of existing for more than a year, many application
3448 author have done nothing to provide the necessary callbacks, which
3449 means that this particular engine will not work properly anywhere.
3450 This is a very unfortunate situation which forces us, in the name
3451 of usability, to give the hw_ncipher.c a static lock, which is part
3453 NOTE: This is for the 0.9.7 series ONLY. This hack will never
3454 appear in 0.9.8 or later. We EXPECT application authors to have
3455 dealt properly with this when 0.9.8 is released (unless we actually
3456 make such changes in the libcrypto locking code that changes will
3457 have to be made anyway).
3460 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
3461 octets have been read, EOF or an error occurs. Without this change
3462 some truncated ASN1 structures will not produce an error.
3465 *) Disable Heimdal support, since it hasn't been fully implemented.
3466 Still give the possibility to force the use of Heimdal, but with
3467 warnings and a request that patches get sent to openssl-dev.
3470 *) Add the VC-CE target, introduce the WINCE sysname, and add
3471 INSTALL.WCE and appropriate conditionals to make it build.
3472 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3474 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
3475 cygssl-x.y.z.dll, where x, y and z are the major, minor and
3476 edit numbers of the version.
3477 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3479 *) Introduce safe string copy and catenation functions
3480 (BUF_strlcpy() and BUF_strlcat()).
3481 [Ben Laurie (CHATS) and Richard Levitte]
3483 *) Avoid using fixed-size buffers for one-line DNs.
3484 [Ben Laurie (CHATS)]
3486 *) Add BUF_MEM_grow_clean() to avoid information leakage when
3487 resizing buffers containing secrets, and use where appropriate.
3488 [Ben Laurie (CHATS)]
3490 *) Avoid using fixed size buffers for configuration file location.
3491 [Ben Laurie (CHATS)]
3493 *) Avoid filename truncation for various CA files.
3494 [Ben Laurie (CHATS)]
3496 *) Use sizeof in preference to magic numbers.
3497 [Ben Laurie (CHATS)]
3499 *) Avoid filename truncation in cert requests.
3500 [Ben Laurie (CHATS)]
3502 *) Add assertions to check for (supposedly impossible) buffer
3504 [Ben Laurie (CHATS)]
3506 *) Don't cache truncated DNS entries in the local cache (this could
3507 potentially lead to a spoofing attack).
3508 [Ben Laurie (CHATS)]
3510 *) Fix various buffers to be large enough for hex/decimal
3511 representations in a platform independent manner.
3512 [Ben Laurie (CHATS)]
3514 *) Add CRYPTO_realloc_clean() to avoid information leakage when
3515 resizing buffers containing secrets, and use where appropriate.
3516 [Ben Laurie (CHATS)]
3518 *) Add BIO_indent() to avoid much slightly worrying code to do
3520 [Ben Laurie (CHATS)]
3522 *) Convert sprintf()/BIO_puts() to BIO_printf().
3523 [Ben Laurie (CHATS)]
3525 *) buffer_gets() could terminate with the buffer only half
3527 [Ben Laurie (CHATS)]
3529 *) Add assertions to prevent user-supplied crypto functions from
3530 overflowing internal buffers by having large block sizes, etc.
3531 [Ben Laurie (CHATS)]
3533 *) New OPENSSL_assert() macro (similar to assert(), but enabled
3535 [Ben Laurie (CHATS)]
3537 *) Eliminate unused copy of key in RC4.
3538 [Ben Laurie (CHATS)]
3540 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
3541 [Ben Laurie (CHATS)]
3543 *) Fix off-by-one error in EGD path.
3544 [Ben Laurie (CHATS)]
3546 *) If RANDFILE path is too long, ignore instead of truncating.
3547 [Ben Laurie (CHATS)]
3549 *) Eliminate unused and incorrectly sized X.509 structure
3551 [Ben Laurie (CHATS)]
3553 *) Eliminate unused and dangerous function knumber().
3554 [Ben Laurie (CHATS)]
3556 *) Eliminate unused and dangerous structure, KSSL_ERR.
3557 [Ben Laurie (CHATS)]
3559 *) Protect against overlong session ID context length in an encoded
3560 session object. Since these are local, this does not appear to be
3562 [Ben Laurie (CHATS)]
3564 *) Change from security patch (see 0.9.6e below) that did not affect
3565 the 0.9.6 release series:
3567 Remote buffer overflow in SSL3 protocol - an attacker could
3568 supply an oversized master key in Kerberos-enabled versions.
3570 [Ben Laurie (CHATS)]
3572 *) Change the SSL kerb5 codes to match RFC 2712.
3575 *) Make -nameopt work fully for req and add -reqopt switch.
3576 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
3578 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
3579 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
3581 *) Make sure tests can be performed even if the corresponding algorithms
3582 have been removed entirely. This was also the last step to make
3583 OpenSSL compilable with DJGPP under all reasonable conditions.
3584 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
3586 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
3587 to allow version independent disabling of normally unselected ciphers,
3588 which may be activated as a side-effect of selecting a single cipher.
3590 (E.g., cipher list string "RSA" enables ciphersuites that are left
3591 out of "ALL" because they do not provide symmetric encryption.
3592 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
3593 [Lutz Jaenicke, Bodo Moeller]
3595 *) Add appropriate support for separate platform-dependent build
3596 directories. The recommended way to make a platform-dependent
3597 build directory is the following (tested on Linux), maybe with
3600 # Place yourself outside of the OpenSSL source tree. In
3601 # this example, the environment variable OPENSSL_SOURCE
3602 # is assumed to contain the absolute OpenSSL source directory.
3603 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
3604 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
3605 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
3606 mkdir -p `dirname $F`
3607 ln -s $OPENSSL_SOURCE/$F $F
3610 To be absolutely sure not to disturb the source tree, a "make clean"
3611 is a good thing. If it isn't successfull, don't worry about it,
3612 it probably means the source directory is very clean.
3615 *) Make sure any ENGINE control commands make local copies of string
3616 pointers passed to them whenever necessary. Otherwise it is possible
3617 the caller may have overwritten (or deallocated) the original string
3618 data when a later ENGINE operation tries to use the stored values.
3619 [Götz Babin-Ebell <babinebell@trustcenter.de>]
3621 *) Improve diagnostics in file reading and command-line digests.
3622 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
3624 *) Add AES modes CFB and OFB to the object database. Correct an
3625 error in AES-CFB decryption.
3628 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
3629 allows existing EVP_CIPHER_CTX structures to be reused after
3630 calling EVP_*Final(). This behaviour is used by encryption
3631 BIOs and some applications. This has the side effect that
3632 applications must explicitly clean up cipher contexts with
3633 EVP_CIPHER_CTX_cleanup() or they will leak memory.
3636 *) Check the values of dna and dnb in bn_mul_recursive before calling
3637 bn_mul_comba (a non zero value means the a or b arrays do not contain
3638 n2 elements) and fallback to bn_mul_normal if either is not zero.
3641 *) Fix escaping of non-ASCII characters when using the -subj option
3642 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
3645 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
3646 form for "surname", serialNumber has no short form.
3647 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
3648 therefore remove "mail" short name for "internet 7".
3649 The OID for unique identifiers in X509 certificates is
3650 x500UniqueIdentifier, not uniqueIdentifier.
3651 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
3654 *) Add an "init" command to the ENGINE config module and auto initialize
3655 ENGINEs. Without any "init" command the ENGINE will be initialized
3656 after all ctrl commands have been executed on it. If init=1 the
3657 ENGINE is initailized at that point (ctrls before that point are run
3658 on the uninitialized ENGINE and after on the initialized one). If
3659 init=0 then the ENGINE will not be iniatialized at all.
3662 *) Fix the 'app_verify_callback' interface so that the user-defined
3663 argument is actually passed to the callback: In the
3664 SSL_CTX_set_cert_verify_callback() prototype, the callback
3665 declaration has been changed from
3668 int (*cb)(X509_STORE_CTX *,void *);
3669 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
3670 i=s->ctx->app_verify_callback(&ctx)
3671 has been changed into
3672 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
3674 To update applications using SSL_CTX_set_cert_verify_callback(),
3675 a dummy argument can be added to their callback functions.
3676 [D. K. Smetters <smetters@parc.xerox.com>]
3678 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
3679 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
3681 *) Add and OPENSSL_LOAD_CONF define which will cause
3682 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
3683 This allows older applications to transparently support certain
3684 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
3685 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
3686 load the config file and OPENSSL_add_all_algorithms_conf() which will
3687 always load it have also been added.
3690 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
3691 Adjust NIDs and EVP layer.
3692 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
3694 *) Config modules support in openssl utility.
3696 Most commands now load modules from the config file,
3697 though in a few (such as version) this isn't done
3698 because it couldn't be used for anything.
3700 In the case of ca and req the config file used is
3701 the same as the utility itself: that is the -config
3702 command line option can be used to specify an
3706 *) Move default behaviour from OPENSSL_config(). If appname is NULL
3707 use "openssl_conf" if filename is NULL use default openssl config file.
3710 *) Add an argument to OPENSSL_config() to allow the use of an alternative
3711 config section name. Add a new flag to tolerate a missing config file
3712 and move code to CONF_modules_load_file().
3715 *) Support for crypto accelerator cards from Accelerated Encryption
3716 Processing, www.aep.ie. (Use engine 'aep')
3717 The support was copied from 0.9.6c [engine] and adapted/corrected
3718 to work with the new engine framework.
3719 [AEP Inc. and Richard Levitte]
3721 *) Support for SureWare crypto accelerator cards from Baltimore
3722 Technologies. (Use engine 'sureware')
3723 The support was copied from 0.9.6c [engine] and adapted
3724 to work with the new engine framework.
3727 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
3728 make the newer ENGINE framework commands for the CHIL engine work.
3729 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
3731 *) Make it possible to produce shared libraries on ReliantUNIX.
3732 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
3734 *) Add the configuration target debug-linux-ppro.
3735 Make 'openssl rsa' use the general key loading routines
3736 implemented in apps.c, and make those routines able to
3737 handle the key format FORMAT_NETSCAPE and the variant
3739 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3741 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3742 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3744 *) Add -keyform to rsautl, and document -engine.
3745 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
3747 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
3748 BIO_R_NO_SUCH_FILE error code rather than the generic
3749 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
3752 *) Add new functions
3754 ERR_peek_last_error_line
3755 ERR_peek_last_error_line_data.
3756 These are similar to
3759 ERR_peek_error_line_data,
3760 but report on the latest error recorded rather than the first one
3761 still in the error queue.
3762 [Ben Laurie, Bodo Moeller]
3764 *) default_algorithms option in ENGINE config module. This allows things
3766 default_algorithms = ALL
3767 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
3770 *) Prelminary ENGINE config module.
3773 *) New experimental application configuration code.
3776 *) Change the AES code to follow the same name structure as all other
3777 symmetric ciphers, and behave the same way. Move everything to
3778 the directory crypto/aes, thereby obsoleting crypto/rijndael.
3779 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
3781 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
3782 [Ben Laurie and Theo de Raadt]
3784 *) Add option to output public keys in req command.
3785 [Massimiliano Pala madwolf@openca.org]
3787 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
3788 (up to about 10% better than before for P-192 and P-224).
3791 *) New functions/macros
3793 SSL_CTX_set_msg_callback(ctx, cb)
3794 SSL_CTX_set_msg_callback_arg(ctx, arg)
3795 SSL_set_msg_callback(ssl, cb)
3796 SSL_set_msg_callback_arg(ssl, arg)
3798 to request calling a callback function
3800 void cb(int write_p, int version, int content_type,
3801 const void *buf, size_t len, SSL *ssl, void *arg)
3803 whenever a protocol message has been completely received
3804 (write_p == 0) or sent (write_p == 1). Here 'version' is the
3805 protocol version according to which the SSL library interprets
3806 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
3807 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
3808 the content type as defined in the SSL 3.0/TLS 1.0 protocol
3809 specification (change_cipher_spec(20), alert(21), handshake(22)).
3810 'buf' and 'len' point to the actual message, 'ssl' to the
3811 SSL object, and 'arg' is the application-defined value set by
3812 SSL[_CTX]_set_msg_callback_arg().
3814 'openssl s_client' and 'openssl s_server' have new '-msg' options
3815 to enable a callback that displays all protocol messages.
3818 *) Change the shared library support so shared libraries are built as
3819 soon as the corresponding static library is finished, and thereby get
3820 openssl and the test programs linked against the shared library.
3821 This still only happens when the keyword "shard" has been given to
3822 the configuration scripts.
3824 NOTE: shared library support is still an experimental thing, and
3825 backward binary compatibility is still not guaranteed.
3826 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
3828 *) Add support for Subject Information Access extension.
3829 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
3831 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
3832 additional bytes when new memory had to be allocated, not just
3833 when reusing an existing buffer.
3836 *) New command line and configuration option 'utf8' for the req command.
3837 This allows field values to be specified as UTF8 strings.
3840 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
3841 runs for the former and machine-readable output for the latter.
3844 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
3845 of the e-mail address in the DN (i.e., it will go into a certificate
3846 extension only). The new configuration file option 'email_in_dn = no'
3847 has the same effect.
3848 [Massimiliano Pala madwolf@openca.org]
3850 *) Change all functions with names starting with des_ to be starting
3851 with DES_ instead. Add wrappers that are compatible with libdes,
3852 but are named _ossl_old_des_*. Finally, add macros that map the
3853 des_* symbols to the corresponding _ossl_old_des_* if libdes
3854 compatibility is desired. If OpenSSL 0.9.6c compatibility is
3855 desired, the des_* symbols will be mapped to DES_*, with one
3858 Since we provide two compatibility mappings, the user needs to
3859 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
3860 compatibility is desired. The default (i.e., when that macro
3861 isn't defined) is OpenSSL 0.9.6c compatibility.
3863 There are also macros that enable and disable the support of old
3864 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
3865 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
3866 are defined, the default will apply: to support the old des routines.
3868 In either case, one must include openssl/des.h to get the correct
3869 definitions. Do not try to just include openssl/des_old.h, that
3872 NOTE: This is a major break of an old API into a new one. Software
3873 authors are encouraged to switch to the DES_ style functions. Some
3874 time in the future, des_old.h and the libdes compatibility functions
3875 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
3876 default), and then completely removed.
3879 *) Test for certificates which contain unsupported critical extensions.
3880 If such a certificate is found during a verify operation it is
3881 rejected by default: this behaviour can be overridden by either
3882 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
3883 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
3884 X509_supported_extension() has also been added which returns 1 if a
3885 particular extension is supported.
3888 *) Modify the behaviour of EVP cipher functions in similar way to digests
3889 to retain compatibility with existing code.
3892 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
3893 compatibility with existing code. In particular the 'ctx' parameter does
3894 not have to be to be initialized before the call to EVP_DigestInit() and
3895 it is tidied up after a call to EVP_DigestFinal(). New function
3896 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
3897 EVP_MD_CTX_copy() changed to not require the destination to be
3898 initialized valid and new function EVP_MD_CTX_copy_ex() added which
3899 requires the destination to be valid.
3901 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
3902 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
3905 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
3906 so that complete 'Handshake' protocol structures are kept in memory
3907 instead of overwriting 'msg_type' and 'length' with 'body' data.
3910 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
3911 [Massimo Santin via Richard Levitte]
3913 *) Major restructuring to the underlying ENGINE code. This includes
3914 reduction of linker bloat, separation of pure "ENGINE" manipulation
3915 (initialisation, etc) from functionality dealing with implementations
3916 of specific crypto iterfaces. This change also introduces integrated
3917 support for symmetric ciphers and digest implementations - so ENGINEs
3918 can now accelerate these by providing EVP_CIPHER and EVP_MD
3919 implementations of their own. This is detailed in crypto/engine/README
3920 as it couldn't be adequately described here. However, there are a few
3921 API changes worth noting - some RSA, DSA, DH, and RAND functions that
3922 were changed in the original introduction of ENGINE code have now
3923 reverted back - the hooking from this code to ENGINE is now a good
3924 deal more passive and at run-time, operations deal directly with
3925 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
3926 dereferencing through an ENGINE pointer any more. Also, the ENGINE
3927 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
3928 they were not being used by the framework as there is no concept of a
3929 BIGNUM_METHOD and they could not be generalised to the new
3930 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
3931 ENGINE_cpy() has been removed as it cannot be consistently defined in
3935 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
3938 *) Change mkdef.pl to sort symbols that get the same entry number,
3939 and make sure the automatically generated functions ERR_load_*
3940 become part of libeay.num as well.
3943 *) New function SSL_renegotiate_pending(). This returns true once
3944 renegotiation has been requested (either SSL_renegotiate() call
3945 or HelloRequest/ClientHello receveived from the peer) and becomes
3946 false once a handshake has been completed.
3947 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
3948 sends a HelloRequest, but does not ensure that a handshake takes
3949 place. SSL_renegotiate_pending() is useful for checking if the
3950 client has followed the request.)
3953 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
3954 By default, clients may request session resumption even during
3955 renegotiation (if session ID contexts permit); with this option,
3956 session resumption is possible only in the first handshake.
3958 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
3959 more bits available for options that should not be part of
3960 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
3963 *) Add some demos for certificate and certificate request creation.
3966 *) Make maximum certificate chain size accepted from the peer application
3967 settable (SSL*_get/set_max_cert_list()), as proposed by
3968 "Douglas E. Engert" <deengert@anl.gov>.
3971 *) Add support for shared libraries for Unixware-7
3972 (Boyd Lynn Gerber <gerberb@zenez.com>).
3975 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
3976 be done prior to destruction. Use this to unload error strings from
3977 ENGINEs that load their own error strings. NB: This adds two new API
3978 functions to "get" and "set" this destroy handler in an ENGINE.
3981 *) Alter all existing ENGINE implementations (except "openssl" and
3982 "openbsd") to dynamically instantiate their own error strings. This
3983 makes them more flexible to be built both as statically-linked ENGINEs
3984 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
3985 Also, add stub code to each that makes building them as self-contained
3986 shared-libraries easier (see README.ENGINE).
3989 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
3990 implementations into applications that are completely implemented in
3991 self-contained shared-libraries. The "dynamic" ENGINE exposes control
3992 commands that can be used to configure what shared-library to load and
3993 to control aspects of the way it is handled. Also, made an update to
3994 the README.ENGINE file that brings its information up-to-date and
3995 provides some information and instructions on the "dynamic" ENGINE
3996 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
3999 *) Make it possible to unload ranges of ERR strings with a new
4000 "ERR_unload_strings" function.
4003 *) Add a copy() function to EVP_MD.
4006 *) Make EVP_MD routines take a context pointer instead of just the
4007 md_data void pointer.
4010 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
4011 that the digest can only process a single chunk of data
4012 (typically because it is provided by a piece of
4013 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
4014 is only going to provide a single chunk of data, and hence the
4015 framework needn't accumulate the data for oneshot drivers.
4018 *) As with "ERR", make it possible to replace the underlying "ex_data"
4019 functions. This change also alters the storage and management of global
4020 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
4021 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
4022 index counters. The API functions that use this state have been changed
4023 to take a "class_index" rather than pointers to the class's local STACK
4024 and counter, and there is now an API function to dynamically create new
4025 classes. This centralisation allows us to (a) plug a lot of the
4026 thread-safety problems that existed, and (b) makes it possible to clean
4027 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
4028 such data would previously have always leaked in application code and
4029 workarounds were in place to make the memory debugging turn a blind eye
4030 to it. Application code that doesn't use this new function will still
4031 leak as before, but their memory debugging output will announce it now
4032 rather than letting it slide.
4034 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
4035 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
4036 has a return value to indicate success or failure.
4039 *) Make it possible to replace the underlying "ERR" functions such that the
4040 global state (2 LHASH tables and 2 locks) is only used by the "default"
4041 implementation. This change also adds two functions to "get" and "set"
4042 the implementation prior to it being automatically set the first time
4043 any other ERR function takes place. Ie. an application can call "get",
4044 pass the return value to a module it has just loaded, and that module
4045 can call its own "set" function using that value. This means the
4046 module's "ERR" operations will use (and modify) the error state in the
4047 application and not in its own statically linked copy of OpenSSL code.
4050 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
4051 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
4052 the operation, and provides a more encapsulated way for external code
4053 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
4054 to use these functions rather than manually incrementing the counts.
4056 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
4059 *) Add EVP test program.
4062 *) Add symmetric cipher support to ENGINE. Expect the API to change!
4065 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
4066 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
4067 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
4068 These allow a CRL to be built without having to access X509_CRL fields
4069 directly. Modify 'ca' application to use new functions.
4072 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
4073 bug workarounds. Rollback attack detection is a security feature.
4074 The problem will only arise on OpenSSL servers when TLSv1 is not
4075 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
4076 Software authors not wanting to support TLSv1 will have special reasons
4077 for their choice and can explicitly enable this option.
4078 [Bodo Moeller, Lutz Jaenicke]
4080 *) Rationalise EVP so it can be extended: don't include a union of
4081 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
4082 (similar to those existing for EVP_CIPHER_CTX).
4087 EVP_MD_CTX_init(&md); /* new function call */
4088 EVP_DigestInit(&md, EVP_sha1());
4089 EVP_DigestUpdate(&md, in, len);
4090 EVP_DigestFinal(&md, out, NULL);
4091 EVP_MD_CTX_cleanup(&md); /* new function call */
4095 *) Make DES key schedule conform to the usual scheme, as well as
4096 correcting its structure. This means that calls to DES functions
4097 now have to pass a pointer to a des_key_schedule instead of a
4098 plain des_key_schedule (which was actually always a pointer
4101 des_key_schedule ks;
4103 des_set_key_checked(..., &ks);
4104 des_ncbc_encrypt(..., &ks, ...);
4106 (Note that a later change renames 'des_...' into 'DES_...'.)
4109 *) Initial reduction of linker bloat: the use of some functions, such as
4110 PEM causes large amounts of unused functions to be linked in due to
4111 poor organisation. For example pem_all.c contains every PEM function
4112 which has a knock on effect of linking in large amounts of (unused)
4113 ASN1 code. Grouping together similar functions and splitting unrelated
4114 functions prevents this.
4117 *) Cleanup of EVP macros.
4120 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
4121 correct _ecb suffix.
4124 *) Add initial OCSP responder support to ocsp application. The
4125 revocation information is handled using the text based index
4126 use by the ca application. The responder can either handle
4127 requests generated internally, supplied in files (for example
4128 via a CGI script) or using an internal minimal server.
4131 *) Add configuration choices to get zlib compression for TLS.
4134 *) Changes to Kerberos SSL for RFC 2712 compliance:
4135 1. Implemented real KerberosWrapper, instead of just using
4136 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
4137 2. Implemented optional authenticator field of KerberosWrapper.
4139 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
4140 and authenticator structs; see crypto/krb5/.
4142 Generalized Kerberos calls to support multiple Kerberos libraries.
4143 [Vern Staats <staatsvr@asc.hpc.mil>,
4144 Jeffrey Altman <jaltman@columbia.edu>
4145 via Richard Levitte]
4147 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
4148 already does with RSA. testdsa.h now has 'priv_key/pub_key'
4149 values for each of the key sizes rather than having just
4150 parameters (and 'speed' generating keys each time).
4153 *) Speed up EVP routines.
4156 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
4157 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
4158 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
4159 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
4161 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
4162 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
4163 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
4166 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
4168 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
4171 *) Added the OS2-EMX target.
4172 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
4174 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
4175 to support NCONF routines in extension code. New function CONF_set_nconf()
4176 to allow functions which take an NCONF to also handle the old LHASH
4177 structure: this means that the old CONF compatible routines can be
4178 retained (in particular wrt extensions) without having to duplicate the
4179 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
4182 *) Enhance the general user interface with mechanisms for inner control
4183 and with possibilities to have yes/no kind of prompts.
4186 *) Change all calls to low level digest routines in the library and
4187 applications to use EVP. Add missing calls to HMAC_cleanup() and
4188 don't assume HMAC_CTX can be copied using memcpy().
4189 [Verdon Walker <VWalker@novell.com>, Steve Henson]
4191 *) Add the possibility to control engines through control names but with
4192 arbitrary arguments instead of just a string.
4193 Change the key loaders to take a UI_METHOD instead of a callback
4194 function pointer. NOTE: this breaks binary compatibility with earlier
4195 versions of OpenSSL [engine].
4196 Adapt the nCipher code for these new conditions and add a card insertion
4200 *) Enhance the general user interface with mechanisms to better support
4201 dialog box interfaces, application-defined prompts, the possibility
4202 to use defaults (for example default passwords from somewhere else)
4203 and interrupts/cancellations.
4206 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
4207 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
4210 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
4211 tidy up some unnecessarily weird code in 'sk_new()').
4212 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
4214 *) Change the key loading routines for ENGINEs to use the same kind
4215 callback (pem_password_cb) as all other routines that need this
4219 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
4220 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
4221 than this minimum value is recommended.
4224 *) New random seeder for OpenVMS, using the system process statistics
4225 that are easily reachable.
4228 *) Windows apparently can't transparently handle global
4229 variables defined in DLLs. Initialisations such as:
4231 const ASN1_ITEM *it = &ASN1_INTEGER_it;
4233 wont compile. This is used by the any applications that need to
4234 declare their own ASN1 modules. This was fixed by adding the option
4235 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
4236 needed for static libraries under Win32.
4239 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
4240 setting of purpose and trust fields. New X509_STORE trust and
4241 purpose functions and tidy up setting in other SSL functions.
4244 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
4245 structure. These are inherited by X509_STORE_CTX when it is
4246 initialised. This allows various defaults to be set in the
4247 X509_STORE structure (such as flags for CRL checking and custom
4248 purpose or trust settings) for functions which only use X509_STORE_CTX
4249 internally such as S/MIME.
4251 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
4252 trust settings if they are not set in X509_STORE. This allows X509_STORE
4253 purposes and trust (in S/MIME for example) to override any set by default.
4255 Add command line options for CRL checking to smime, s_client and s_server
4259 *) Initial CRL based revocation checking. If the CRL checking flag(s)
4260 are set then the CRL is looked up in the X509_STORE structure and
4261 its validity and signature checked, then if the certificate is found
4262 in the CRL the verify fails with a revoked error.
4264 Various new CRL related callbacks added to X509_STORE_CTX structure.
4266 Command line options added to 'verify' application to support this.
4268 This needs some additional work, such as being able to handle multiple
4269 CRLs with different times, extension based lookup (rather than just
4270 by subject name) and ultimately more complete V2 CRL extension
4274 *) Add a general user interface API (crypto/ui/). This is designed
4275 to replace things like des_read_password and friends (backward
4276 compatibility functions using this new API are provided).
4277 The purpose is to remove prompting functions from the DES code
4278 section as well as provide for prompting through dialog boxes in
4279 a window system and the like.
4282 *) Add "ex_data" support to ENGINE so implementations can add state at a
4283 per-structure level rather than having to store it globally.
4286 *) Make it possible for ENGINE structures to be copied when retrieved by
4287 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
4288 This causes the "original" ENGINE structure to act like a template,
4289 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
4290 operational state can be localised to each ENGINE structure, despite the
4291 fact they all share the same "methods". New ENGINE structures returned in
4292 this case have no functional references and the return value is the single
4293 structural reference. This matches the single structural reference returned
4294 by ENGINE_by_id() normally, when it is incremented on the pre-existing
4298 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
4299 needs to match any other type at all we need to manually clear the
4303 *) Changes to the "openssl engine" utility to include;
4304 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
4305 about an ENGINE's available control commands.
4306 - executing control commands from command line arguments using the
4307 '-pre' and '-post' switches. '-post' is only used if '-t' is
4308 specified and the ENGINE is successfully initialised. The syntax for
4309 the individual commands are colon-separated, for example;
4310 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
4313 *) New dynamic control command support for ENGINEs. ENGINEs can now
4314 declare their own commands (numbers), names (strings), descriptions,
4315 and input types for run-time discovery by calling applications. A
4316 subset of these commands are implicitly classed as "executable"
4317 depending on their input type, and only these can be invoked through
4318 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
4319 can be based on user input, config files, etc). The distinction is
4320 that "executable" commands cannot return anything other than a boolean
4321 result and can only support numeric or string input, whereas some
4322 discoverable commands may only be for direct use through
4323 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
4324 pointers, or other custom uses. The "executable" commands are to
4325 support parameterisations of ENGINE behaviour that can be
4326 unambiguously defined by ENGINEs and used consistently across any
4327 OpenSSL-based application. Commands have been added to all the
4328 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
4329 control over shared-library paths without source code alterations.
4332 *) Changed all ENGINE implementations to dynamically allocate their
4333 ENGINEs rather than declaring them statically. Apart from this being
4334 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
4335 this also allows the implementations to compile without using the
4336 internal engine_int.h header.
4339 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
4340 'const' value. Any code that should be able to modify a RAND_METHOD
4341 should already have non-const pointers to it (ie. they should only
4342 modify their own ones).
4345 *) Made a variety of little tweaks to the ENGINE code.
4346 - "atalla" and "ubsec" string definitions were moved from header files
4347 to C code. "nuron" string definitions were placed in variables
4348 rather than hard-coded - allowing parameterisation of these values
4349 later on via ctrl() commands.
4350 - Removed unused "#if 0"'d code.
4351 - Fixed engine list iteration code so it uses ENGINE_free() to release
4352 structural references.
4353 - Constified the RAND_METHOD element of ENGINE structures.
4354 - Constified various get/set functions as appropriate and added
4355 missing functions (including a catch-all ENGINE_cpy that duplicates
4356 all ENGINE values onto a new ENGINE except reference counts/state).
4357 - Removed NULL parameter checks in get/set functions. Setting a method
4358 or function to NULL is a way of cancelling out a previously set
4359 value. Passing a NULL ENGINE parameter is just plain stupid anyway
4360 and doesn't justify the extra error symbols and code.
4361 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
4362 flags from engine_int.h to engine.h.
4363 - Changed prototypes for ENGINE handler functions (init(), finish(),
4364 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
4367 *) Implement binary inversion algorithm for BN_mod_inverse in addition
4368 to the algorithm using long division. The binary algorithm can be
4369 used only if the modulus is odd. On 32-bit systems, it is faster
4370 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
4371 roughly 5-15% for 256-bit moduli), so we use it only for moduli
4372 up to 450 bits. In 64-bit environments, the binary algorithm
4373 appears to be advantageous for much longer moduli; here we use it
4374 for moduli up to 2048 bits.
4377 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
4378 could not support the combine flag in choice fields.
4381 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
4382 extensions from a certificate request to the certificate.
4385 *) Allow multiple 'certopt' and 'nameopt' options to be separated
4386 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
4387 file: this allows the display of the certificate about to be
4388 signed to be customised, to allow certain fields to be included
4389 or excluded and extension details. The old system didn't display
4390 multicharacter strings properly, omitted fields not in the policy
4391 and couldn't display additional details such as extensions.
4394 *) Function EC_POINTs_mul for multiple scalar multiplication
4395 of an arbitrary number of elliptic curve points
4396 \sum scalars[i]*points[i],
4397 optionally including the generator defined for the EC_GROUP:
4398 scalar*generator + \sum scalars[i]*points[i].
4400 EC_POINT_mul is a simple wrapper function for the typical case
4401 that the point list has just one item (besides the optional
4405 *) First EC_METHODs for curves over GF(p):
4407 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
4408 operations and provides various method functions that can also
4409 operate with faster implementations of modular arithmetic.
4411 EC_GFp_mont_method() reuses most functions that are part of
4412 EC_GFp_simple_method, but uses Montgomery arithmetic.
4414 [Bodo Moeller; point addition and point doubling
4415 implementation directly derived from source code provided by
4416 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
4418 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
4419 crypto/ec/ec_lib.c):
4421 Curves are EC_GROUP objects (with an optional group generator)
4422 based on EC_METHODs that are built into the library.
4424 Points are EC_POINT objects based on EC_GROUP objects.
4426 Most of the framework would be able to handle curves over arbitrary
4427 finite fields, but as there are no obvious types for fields other
4428 than GF(p), some functions are limited to that for now.
4431 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
4432 that the file contains a complete HTTP response.
4435 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
4436 change the def and num file printf format specifier from "%-40sXXX"
4437 to "%-39s XXX". The latter will always guarantee a space after the
4438 field while the former will cause them to run together if the field
4439 is 40 of more characters long.
4442 *) Constify the cipher and digest 'method' functions and structures
4443 and modify related functions to take constant EVP_MD and EVP_CIPHER
4447 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
4448 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
4451 *) Modify EVP_Digest*() routines so they now return values. Although the
4452 internal software routines can never fail additional hardware versions
4456 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
4458 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
4459 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
4462 ERR_R_NESTED_ASN1_ERROR
4464 ERR_R_MISSING_ASN1_EOS
4465 were 4 .. 9, conflicting with
4466 ERR_LIB_RSA (= ERR_R_RSA_LIB)
4468 ERR_LIB_PEM (= ERR_R_PEM_LIB).
4469 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
4471 Add new error code 'ERR_R_INTERNAL_ERROR'.
4474 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
4478 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
4479 sets the subject name for a new request or supersedes the
4480 subject name in a given request. Formats that can be parsed are
4481 'CN=Some Name, OU=myOU, C=IT'
4483 'CN=Some Name/OU=myOU/C=IT'.
4485 Add options '-batch' and '-verbose' to 'openssl req'.
4486 [Massimiliano Pala <madwolf@hackmasters.net>]
4488 *) Introduce the possibility to access global variables through
4489 functions on platform were that's the best way to handle exporting
4490 global variables in shared libraries. To enable this functionality,
4491 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
4492 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
4493 is normally done by Configure or something similar).
4495 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
4496 in the source file (foo.c) like this:
4498 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
4499 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
4501 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
4502 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
4504 OPENSSL_DECLARE_GLOBAL(int,foo);
4505 #define foo OPENSSL_GLOBAL_REF(foo)
4506 OPENSSL_DECLARE_GLOBAL(double,bar);
4507 #define bar OPENSSL_GLOBAL_REF(bar)
4509 The #defines are very important, and therefore so is including the
4510 header file everywhere where the defined globals are used.
4512 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
4513 of ASN.1 items, but that structure is a bit different.
4515 The largest change is in util/mkdef.pl which has been enhanced with
4516 better and easier to understand logic to choose which symbols should
4517 go into the Windows .def files as well as a number of fixes and code
4518 cleanup (among others, algorithm keywords are now sorted
4519 lexicographically to avoid constant rewrites).
4522 *) In BN_div() keep a copy of the sign of 'num' before writing the
4523 result to 'rm' because if rm==num the value will be overwritten
4524 and produce the wrong result if 'num' is negative: this caused
4525 problems with BN_mod() and BN_nnmod().
4528 *) Function OCSP_request_verify(). This checks the signature on an
4529 OCSP request and verifies the signer certificate. The signer
4530 certificate is just checked for a generic purpose and OCSP request
4534 *) Add OCSP_check_validity() function to check the validity of OCSP
4535 responses. OCSP responses are prepared in real time and may only
4536 be a few seconds old. Simply checking that the current time lies
4537 between thisUpdate and nextUpdate max reject otherwise valid responses
4538 caused by either OCSP responder or client clock inaccuracy. Instead
4539 we allow thisUpdate and nextUpdate to fall within a certain period of
4540 the current time. The age of the response can also optionally be
4541 checked. Two new options -validity_period and -status_age added to
4545 *) If signature or public key algorithm is unrecognized print out its
4546 OID rather that just UNKNOWN.
4549 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
4550 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
4551 ID to be generated from the issuer certificate alone which can then be
4552 passed to OCSP_id_issuer_cmp().
4555 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
4556 ASN1 modules to export functions returning ASN1_ITEM pointers
4557 instead of the ASN1_ITEM structures themselves. This adds several
4558 new macros which allow the underlying ASN1 function/structure to
4559 be accessed transparently. As a result code should not use ASN1_ITEM
4560 references directly (such as &X509_it) but instead use the relevant
4561 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
4562 use of the new ASN1 code on platforms where exporting structures
4563 is problematical (for example in shared libraries) but exporting
4564 functions returning pointers to structures is not.
4567 *) Add support for overriding the generation of SSL/TLS session IDs.
4568 These callbacks can be registered either in an SSL_CTX or per SSL.
4569 The purpose of this is to allow applications to control, if they wish,
4570 the arbitrary values chosen for use as session IDs, particularly as it
4571 can be useful for session caching in multiple-server environments. A
4572 command-line switch for testing this (and any client code that wishes
4573 to use such a feature) has been added to "s_server".
4574 [Geoff Thorpe, Lutz Jaenicke]
4576 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
4577 of the form '#if defined(...) || defined(...) || ...' and
4578 '#if !defined(...) && !defined(...) && ...'. This also avoids
4579 the growing number of special cases it was previously handling.
4582 *) Make all configuration macros available for application by making
4583 sure they are available in opensslconf.h, by giving them names starting
4584 with "OPENSSL_" to avoid conflicts with other packages and by making
4585 sure e_os2.h will cover all platform-specific cases together with
4587 Additionally, it is now possible to define configuration/platform-
4588 specific names (called "system identities"). In the C code, these
4589 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
4590 macro with the name beginning with "OPENSSL_SYS_", which is determined
4591 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
4595 *) New option -set_serial to 'req' and 'x509' this allows the serial
4596 number to use to be specified on the command line. Previously self
4597 signed certificates were hard coded with serial number 0 and the
4598 CA options of 'x509' had to use a serial number in a file which was
4602 *) New options to 'ca' utility to support V2 CRL entry extensions.
4603 Currently CRL reason, invalidity date and hold instruction are
4604 supported. Add new CRL extensions to V3 code and some new objects.
4607 *) New function EVP_CIPHER_CTX_set_padding() this is used to
4608 disable standard block padding (aka PKCS#5 padding) in the EVP
4609 API, which was previously mandatory. This means that the data is
4610 not padded in any way and so the total length much be a multiple
4611 of the block size, otherwise an error occurs.
4614 *) Initial (incomplete) OCSP SSL support.
4617 *) New function OCSP_parse_url(). This splits up a URL into its host,
4618 port and path components: primarily to parse OCSP URLs. New -url
4619 option to ocsp utility.
4622 *) New nonce behavior. The return value of OCSP_check_nonce() now
4623 reflects the various checks performed. Applications can decide
4624 whether to tolerate certain situations such as an absent nonce
4625 in a response when one was present in a request: the ocsp application
4626 just prints out a warning. New function OCSP_add1_basic_nonce()
4627 this is to allow responders to include a nonce in a response even if
4628 the request is nonce-less.
4631 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
4632 skipped when using openssl x509 multiple times on a single input file,
4633 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
4636 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
4637 set string type: to handle setting ASN1_TIME structures. Fix ca
4638 utility to correctly initialize revocation date of CRLs.
4641 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
4642 the clients preferred ciphersuites and rather use its own preferences.
4643 Should help to work around M$ SGC (Server Gated Cryptography) bug in
4644 Internet Explorer by ensuring unchanged hash method during stepup.
4645 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
4648 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
4649 to aes and add a new 'exist' option to print out symbols that don't
4653 *) Additional options to ocsp utility to allow flags to be set and
4654 additional certificates supplied.
4657 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
4658 OCSP client a number of certificate to only verify the response
4662 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
4663 handle the new API. Currently only ECB, CBC modes supported. Add new
4666 Add TLS AES ciphersuites as described in RFC3268, "Advanced
4667 Encryption Standard (AES) Ciphersuites for Transport Layer
4668 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
4669 not enabled by default and were not part of the "ALL" ciphersuite
4670 alias because they were not yet official; they could be
4671 explicitly requested by specifying the "AESdraft" ciphersuite
4672 group alias. In the final release of OpenSSL 0.9.7, the group
4673 alias is called "AES" and is part of "ALL".)
4674 [Ben Laurie, Steve Henson, Bodo Moeller]
4676 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
4677 request to response.
4680 *) Functions for OCSP responders. OCSP_request_onereq_count(),
4681 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
4682 extract information from a certificate request. OCSP_response_create()
4683 creates a response and optionally adds a basic response structure.
4684 OCSP_basic_add1_status() adds a complete single response to a basic
4685 response and returns the OCSP_SINGLERESP structure just added (to allow
4686 extensions to be included for example). OCSP_basic_add1_cert() adds a
4687 certificate to a basic response and OCSP_basic_sign() signs a basic
4688 response with various flags. New helper functions ASN1_TIME_check()
4689 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
4690 (converts ASN1_TIME to GeneralizedTime).
4693 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
4694 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
4695 structure from a certificate. X509_pubkey_digest() digests the public_key
4696 contents: this is used in various key identifiers.
4699 *) Make sk_sort() tolerate a NULL argument.
4700 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
4702 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
4703 passed by the function are trusted implicitly. If any of them signed the
4704 response then it is assumed to be valid and is not verified.
4707 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
4708 to data. This was previously part of the PKCS7 ASN1 code. This
4709 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
4710 [Steve Henson, reported by Kenneth R. Robinette
4711 <support@securenetterm.com>]
4713 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
4714 routines: without these tracing memory leaks is very painful.
4715 Fix leaks in PKCS12 and PKCS7 routines.
4718 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
4719 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
4720 effectively meant GeneralizedTime would never be used. Now it
4721 is initialised to -1 but X509_time_adj() now has to check the value
4722 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
4723 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
4724 [Steve Henson, reported by Kenneth R. Robinette
4725 <support@securenetterm.com>]
4727 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
4728 result in a zero length in the ASN1_INTEGER structure which was
4729 not consistent with the structure when d2i_ASN1_INTEGER() was used
4730 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
4731 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
4732 where it did not print out a minus for negative ASN1_INTEGER.
4735 *) Add summary printout to ocsp utility. The various functions which
4736 convert status values to strings have been renamed to:
4737 OCSP_response_status_str(), OCSP_cert_status_str() and
4738 OCSP_crl_reason_str() and are no longer static. New options
4739 to verify nonce values and to disable verification. OCSP response
4740 printout format cleaned up.
4743 *) Add additional OCSP certificate checks. These are those specified
4744 in RFC2560. This consists of two separate checks: the CA of the
4745 certificate being checked must either be the OCSP signer certificate
4746 or the issuer of the OCSP signer certificate. In the latter case the
4747 OCSP signer certificate must contain the OCSP signing extended key
4748 usage. This check is performed by attempting to match the OCSP
4749 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
4750 in the OCSP_CERTID structures of the response.
4753 *) Initial OCSP certificate verification added to OCSP_basic_verify()
4754 and related routines. This uses the standard OpenSSL certificate
4755 verify routines to perform initial checks (just CA validity) and
4756 to obtain the certificate chain. Then additional checks will be
4757 performed on the chain. Currently the root CA is checked to see
4758 if it is explicitly trusted for OCSP signing. This is used to set
4759 a root CA as a global signing root: that is any certificate that
4760 chains to that CA is an acceptable OCSP signing certificate.
4763 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
4764 extensions from a separate configuration file.
4765 As when reading extensions from the main configuration file,
4766 the '-extensions ...' option may be used for specifying the
4768 [Massimiliano Pala <madwolf@comune.modena.it>]
4770 *) New OCSP utility. Allows OCSP requests to be generated or
4771 read. The request can be sent to a responder and the output
4772 parsed, outputed or printed in text form. Not complete yet:
4773 still needs to check the OCSP response validity.
4776 *) New subcommands for 'openssl ca':
4777 'openssl ca -status <serial>' prints the status of the cert with
4778 the given serial number (according to the index file).
4779 'openssl ca -updatedb' updates the expiry status of certificates
4781 [Massimiliano Pala <madwolf@comune.modena.it>]
4783 *) New '-newreq-nodes' command option to CA.pl. This is like
4784 '-newreq', but calls 'openssl req' with the '-nodes' option
4785 so that the resulting key is not encrypted.
4786 [Damien Miller <djm@mindrot.org>]
4788 *) New configuration for the GNU Hurd.
4789 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
4791 *) Initial code to implement OCSP basic response verify. This
4792 is currently incomplete. Currently just finds the signer's
4793 certificate and verifies the signature on the response.
4796 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
4797 value of OPENSSLDIR. This is available via the new '-d' option
4798 to 'openssl version', and is also included in 'openssl version -a'.
4801 *) Allowing defining memory allocation callbacks that will be given
4802 file name and line number information in additional arguments
4803 (a const char* and an int). The basic functionality remains, as
4804 well as the original possibility to just replace malloc(),
4805 realloc() and free() by functions that do not know about these
4806 additional arguments. To register and find out the current
4807 settings for extended allocation functions, the following
4808 functions are provided:
4810 CRYPTO_set_mem_ex_functions
4811 CRYPTO_set_locked_mem_ex_functions
4812 CRYPTO_get_mem_ex_functions
4813 CRYPTO_get_locked_mem_ex_functions
4815 These work the same way as CRYPTO_set_mem_functions and friends.
4816 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
4817 extended allocation function is enabled.
4818 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
4819 a conventional allocation function is enabled.
4820 [Richard Levitte, Bodo Moeller]
4822 *) Finish off removing the remaining LHASH function pointer casts.
4823 There should no longer be any prototype-casting required when using
4824 the LHASH abstraction, and any casts that remain are "bugs". See
4825 the callback types and macros at the head of lhash.h for details
4826 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
4829 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
4830 If /dev/[u]random devices are not available or do not return enough
4831 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
4833 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
4834 /etc/entropy will be queried once each in this sequence, quering stops
4835 when enough entropy was collected without querying more sockets.
4838 *) Change the Unix RAND_poll() variant to be able to poll several
4839 random devices, as specified by DEVRANDOM, until a sufficient amount
4840 of data has been collected. We spend at most 10 ms on each file
4841 (select timeout) and read in non-blocking mode. DEVRANDOM now
4842 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
4843 (previously it was just the string "/dev/urandom"), so on typical
4844 platforms the 10 ms delay will never occur.
4845 Also separate out the Unix variant to its own file, rand_unix.c.
4846 For VMS, there's a currently-empty rand_vms.c.
4849 *) Move OCSP client related routines to ocsp_cl.c. These
4850 provide utility functions which an application needing
4851 to issue a request to an OCSP responder and analyse the
4852 response will typically need: as opposed to those which an
4853 OCSP responder itself would need which will be added later.
4855 OCSP_request_sign() signs an OCSP request with an API similar
4856 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
4857 response. OCSP_response_get1_basic() extracts basic response
4858 from response. OCSP_resp_find_status(): finds and extracts status
4859 information from an OCSP_CERTID structure (which will be created
4860 when the request structure is built). These are built from lower
4861 level functions which work on OCSP_SINGLERESP structures but
4862 wont normally be used unless the application wishes to examine
4863 extensions in the OCSP response for example.
4865 Replace nonce routines with a pair of functions.
4866 OCSP_request_add1_nonce() adds a nonce value and optionally
4867 generates a random value. OCSP_check_nonce() checks the
4868 validity of the nonce in an OCSP response.
4871 *) Change function OCSP_request_add() to OCSP_request_add0_id().
4872 This doesn't copy the supplied OCSP_CERTID and avoids the
4873 need to free up the newly created id. Change return type
4874 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
4875 This can then be used to add extensions to the request.
4876 Deleted OCSP_request_new(), since most of its functionality
4877 is now in OCSP_REQUEST_new() (and the case insensitive name
4878 clash) apart from the ability to set the request name which
4879 will be added elsewhere.
4882 *) Update OCSP API. Remove obsolete extensions argument from
4883 various functions. Extensions are now handled using the new
4884 OCSP extension code. New simple OCSP HTTP function which
4885 can be used to send requests and parse the response.
4888 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
4889 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
4890 uses the special reorder version of SET OF to sort the attributes
4891 and reorder them to match the encoded order. This resolves a long
4892 standing problem: a verify on a PKCS7 structure just after signing
4893 it used to fail because the attribute order did not match the
4894 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
4895 it uses the received order. This is necessary to tolerate some broken
4896 software that does not order SET OF. This is handled by encoding
4897 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
4898 to produce the required SET OF.
4901 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
4902 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
4903 files to get correct declarations of the ASN.1 item variables.
4906 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
4907 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
4908 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
4909 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
4910 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
4911 ASN1_ITEM and no wrapper functions.
4914 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
4915 replace the old function pointer based I/O routines. Change most of
4916 the *_d2i_bio() and *_d2i_fp() functions to use these.
4919 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
4920 lines, recognice more "algorithms" that can be deselected, and make
4921 it complain about algorithm deselection that isn't recognised.
4924 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
4925 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
4926 to use new functions. Add NO_ASN1_OLD which can be set to remove
4927 some old style ASN1 functions: this can be used to determine if old
4928 code will still work when these eventually go away.
4931 *) New extension functions for OCSP structures, these follow the
4932 same conventions as certificates and CRLs.
4935 *) New function X509V3_add1_i2d(). This automatically encodes and
4936 adds an extension. Its behaviour can be customised with various
4937 flags to append, replace or delete. Various wrappers added for
4938 certifcates and CRLs.
4941 *) Fix to avoid calling the underlying ASN1 print routine when
4942 an extension cannot be parsed. Correct a typo in the
4943 OCSP_SERVICELOC extension. Tidy up print OCSP format.
4946 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
4947 entries for variables.
4950 *) Add functionality to apps/openssl.c for detecting locking
4951 problems: As the program is single-threaded, all we have
4952 to do is register a locking callback using an array for
4953 storing which locks are currently held by the program.
4956 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
4957 SSL_get_ex_data_X509_STORE_idx(), which is used in
4958 ssl_verify_cert_chain() and thus can be called at any time
4959 during TLS/SSL handshakes so that thread-safety is essential.
4960 Unfortunately, the ex_data design is not at all suited
4961 for multi-threaded use, so it probably should be abolished.
4964 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
4965 [Broadcom, tweaked and integrated by Geoff Thorpe]
4967 *) Move common extension printing code to new function
4968 X509V3_print_extensions(). Reorganise OCSP print routines and
4969 implement some needed OCSP ASN1 functions. Add OCSP extensions.
4972 *) New function X509_signature_print() to remove duplication in some
4976 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
4977 set (this was treated exactly the same as SET OF previously). This
4978 is used to reorder the STACK representing the structure to match the
4979 encoding. This will be used to get round a problem where a PKCS7
4980 structure which was signed could not be verified because the STACK
4981 order did not reflect the encoded order.
4984 *) Reimplement the OCSP ASN1 module using the new code.
4987 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
4988 for its ASN1 operations. The old style function pointers still exist
4989 for now but they will eventually go away.
4992 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
4993 completely replaces the old ASN1 functionality with a table driven
4994 encoder and decoder which interprets an ASN1_ITEM structure describing
4995 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
4996 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
4997 has also been converted to the new form.
5000 *) Change BN_mod_exp_recp so that negative moduli are tolerated
5001 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
5002 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
5003 for negative moduli.
5006 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
5007 of not touching the result's sign bit.
5010 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
5014 *) Changed the LHASH code to use prototypes for callbacks, and created
5015 macros to declare and implement thin (optionally static) functions
5016 that provide type-safety and avoid function pointer casting for the
5017 type-specific callbacks.
5020 *) Added Kerberos Cipher Suites to be used with TLS, as written in
5022 [Veers Staats <staatsvr@asc.hpc.mil>,
5023 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
5025 *) Reformat the FAQ so the different questions and answers can be divided
5026 in sections depending on the subject.
5029 *) Have the zlib compression code load ZLIB.DLL dynamically under
5033 *) New function BN_mod_sqrt for computing square roots modulo a prime
5034 (using the probabilistic Tonelli-Shanks algorithm unless
5035 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
5036 be handled deterministically).
5037 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5039 *) Make BN_mod_inverse faster by explicitly handling small quotients
5040 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
5041 512 bits], about 30% for larger ones [1024 or 2048 bits].)
5044 *) New function BN_kronecker.
5047 *) Fix BN_gcd so that it works on negative inputs; the result is
5048 positive unless both parameters are zero.
5049 Previously something reasonably close to an infinite loop was
5050 possible because numbers could be growing instead of shrinking
5051 in the implementation of Euclid's algorithm.
5054 *) Fix BN_is_word() and BN_is_one() macros to take into account the
5055 sign of the number in question.
5057 Fix BN_is_word(a,w) to work correctly for w == 0.
5059 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
5060 because its test if the absolute value of 'a' equals 'w'.
5061 Note that BN_abs_is_word does *not* handle w == 0 reliably;
5062 it exists mostly for use in the implementations of BN_is_zero(),
5063 BN_is_one(), and BN_is_word().
5066 *) New function BN_swap.
5069 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
5070 the exponentiation functions are more likely to produce reasonable
5071 results on negative inputs.
5074 *) Change BN_mod_mul so that the result is always non-negative.
5075 Previously, it could be negative if one of the factors was negative;
5076 I don't think anyone really wanted that behaviour.
5079 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
5080 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
5081 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
5082 and add new functions:
5091 BN_mod_lshift1_quick
5095 These functions always generate non-negative results.
5097 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
5098 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
5100 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
5101 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
5102 be reduced modulo m.
5103 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5106 The following entry accidentily appeared in the CHANGES file
5107 distributed with OpenSSL 0.9.7. The modifications described in
5108 it do *not* apply to OpenSSL 0.9.7.
5110 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
5111 was actually never needed) and in BN_mul(). The removal in BN_mul()
5112 required a small change in bn_mul_part_recursive() and the addition
5113 of the functions bn_cmp_part_words(), bn_sub_part_words() and
5114 bn_add_part_words(), which do the same thing as bn_cmp_words(),
5115 bn_sub_words() and bn_add_words() except they take arrays with
5120 *) In 'openssl passwd', verify passwords read from the terminal
5121 unless the '-salt' option is used (which usually means that
5122 verification would just waste user's time since the resulting
5123 hash is going to be compared with some given password hash)
5124 or the new '-noverify' option is used.
5126 This is an incompatible change, but it does not affect
5127 non-interactive use of 'openssl passwd' (passwords on the command
5128 line, '-stdin' option, '-in ...' option) and thus should not
5132 *) Remove all references to RSAref, since there's no more need for it.
5135 *) Make DSO load along a path given through an environment variable
5136 (SHLIB_PATH) with shl_load().
5139 *) Constify the ENGINE code as a result of BIGNUM constification.
5140 Also constify the RSA code and most things related to it. In a
5141 few places, most notable in the depth of the ASN.1 code, ugly
5142 casts back to non-const were required (to be solved at a later
5146 *) Make it so the openssl application has all engines loaded by default.
5149 *) Constify the BIGNUM routines a little more.
5152 *) Add the following functions:
5154 ENGINE_load_cswift()
5156 ENGINE_load_atalla()
5158 ENGINE_load_builtin_engines()
5160 That way, an application can itself choose if external engines that
5161 are built-in in OpenSSL shall ever be used or not. The benefit is
5162 that applications won't have to be linked with libdl or other dso
5163 libraries unless it's really needed.
5165 Changed 'openssl engine' to load all engines on demand.
5166 Changed the engine header files to avoid the duplication of some
5167 declarations (they differed!).
5170 *) 'openssl engine' can now list capabilities.
5173 *) Better error reporting in 'openssl engine'.
5176 *) Never call load_dh_param(NULL) in s_server.
5179 *) Add engine application. It can currently list engines by name and
5180 identity, and test if they are actually available.
5183 *) Improve RPM specification file by forcing symbolic linking and making
5184 sure the installed documentation is also owned by root.root.
5185 [Damien Miller <djm@mindrot.org>]
5187 *) Give the OpenSSL applications more possibilities to make use of
5188 keys (public as well as private) handled by engines.
5191 *) Add OCSP code that comes from CertCo.
5194 *) Add VMS support for the Rijndael code.
5197 *) Added untested support for Nuron crypto accelerator.
5200 *) Add support for external cryptographic devices. This code was
5201 previously distributed separately as the "engine" branch.
5202 [Geoff Thorpe, Richard Levitte]
5204 *) Rework the filename-translation in the DSO code. It is now possible to
5205 have far greater control over how a "name" is turned into a filename
5206 depending on the operating environment and any oddities about the
5207 different shared library filenames on each system.
5210 *) Support threads on FreeBSD-elf in Configure.
5213 *) Fix for SHA1 assembly problem with MASM: it produces
5214 warnings about corrupt line number information when assembling
5215 with debugging information. This is caused by the overlapping
5217 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
5220 NCONF_get_number() has no error checking at all. As a replacement,
5221 NCONF_get_number_e() is defined (_e for "error checking") and is
5222 promoted strongly. The old NCONF_get_number is kept around for
5223 binary backward compatibility.
5224 Make it possible for methods to load from something other than a BIO,
5225 by providing a function pointer that is given a name instead of a BIO.
5226 For example, this could be used to load configuration data from an
5230 *) Fix for non blocking accept BIOs. Added new I/O special reason
5231 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
5232 with non blocking I/O was not possible because no retry code was
5233 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
5237 *) Added the beginnings of Rijndael support.
5240 *) Fix for bug in DirectoryString mask setting. Add support for
5241 X509_NAME_print_ex() in 'req' and X509_print_ex() function
5242 to allow certificate printing to more controllable, additional
5243 'certopt' option to 'x509' to allow new printing options to be
5247 *) Clean old EAY MD5 hack from e_os.h.
5250 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
5252 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
5253 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
5254 [Joe Orton, Steve Henson]
5256 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
5258 *) Fix additional bug revealed by the NISCC test suite:
5260 Stop bug triggering large recursion when presented with
5261 certain ASN.1 tags (CVE-2003-0851)
5264 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
5266 *) Fix various bugs revealed by running the NISCC test suite:
5268 Stop out of bounds reads in the ASN1 code when presented with
5269 invalid tags (CVE-2003-0543 and CVE-2003-0544).
5271 If verify callback ignores invalid public key errors don't try to check
5272 certificate signature with the NULL public key.
5276 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
5277 if the server requested one: as stated in TLS 1.0 and SSL 3.0
5281 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
5282 extra data after the compression methods not only for TLS 1.0
5283 but also for SSL 3.0 (as required by the specification).
5284 [Bodo Moeller; problem pointed out by Matthias Loepfe]
5286 *) Change X509_certificate_type() to mark the key as exported/exportable
5287 when it's 512 *bits* long, not 512 bytes.
5290 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
5292 *) Countermeasure against the Klima-Pokorny-Rosa extension of
5293 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
5294 a protocol version number mismatch like a decryption error
5295 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
5298 *) Turn on RSA blinding by default in the default implementation
5299 to avoid a timing attack. Applications that don't want it can call
5300 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
5301 They would be ill-advised to do so in most cases.
5302 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
5304 *) Change RSA blinding code so that it works when the PRNG is not
5305 seeded (in this case, the secret RSA exponent is abused as
5306 an unpredictable seed -- if it is not unpredictable, there
5307 is no point in blinding anyway). Make RSA blinding thread-safe
5308 by remembering the creator's thread ID in rsa->blinding and
5309 having all other threads use local one-time blinding factors
5310 (this requires more computation than sharing rsa->blinding, but
5311 avoids excessive locking; and if an RSA object is not shared
5312 between threads, blinding will still be very fast).
5315 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
5317 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
5318 via timing by performing a MAC computation even if incorrrect
5319 block cipher padding has been found. This is a countermeasure
5320 against active attacks where the attacker has to distinguish
5321 between bad padding and a MAC verification error. (CVE-2003-0078)
5323 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
5324 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
5325 Martin Vuagnoux (EPFL, Ilion)]
5327 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
5329 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
5330 memory from it's contents. This is done with a counter that will
5331 place alternating values in each byte. This can be used to solve
5332 two issues: 1) the removal of calls to memset() by highly optimizing
5333 compilers, and 2) cleansing with other values than 0, since those can
5334 be read through on certain media, for example a swap space on disk.
5337 *) Bugfix: client side session caching did not work with external caching,
5338 because the session->cipher setting was not restored when reloading
5339 from the external cache. This problem was masked, when
5340 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
5341 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
5344 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
5345 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
5346 [Zeev Lieber <zeev-l@yahoo.com>]
5348 *) Undo an undocumented change introduced in 0.9.6e which caused
5349 repeated calls to OpenSSL_add_all_ciphers() and
5350 OpenSSL_add_all_digests() to be ignored, even after calling
5354 *) Change the default configuration reader to deal with last line not
5355 being properly terminated.
5358 *) Change X509_NAME_cmp() so it applies the special rules on handling
5359 DN values that are of type PrintableString, as well as RDNs of type
5360 emailAddress where the value has the type ia5String.
5361 [stefank@valicert.com via Richard Levitte]
5363 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
5364 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
5365 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
5366 the bitwise-OR of the two for use by the majority of applications
5367 wanting this behaviour, and update the docs. The documented
5368 behaviour and actual behaviour were inconsistent and had been
5369 changing anyway, so this is more a bug-fix than a behavioural
5371 [Geoff Thorpe, diagnosed by Nadav Har'El]
5373 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
5374 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
5377 *) Fix initialization code race conditions in
5378 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
5379 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
5380 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
5381 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
5382 ssl2_get_cipher_by_char(),
5383 ssl3_get_cipher_by_char().
5384 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
5386 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
5387 the cached sessions are flushed, as the remove_cb() might use ex_data
5388 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
5389 (see [openssl.org #212]).
5390 [Geoff Thorpe, Lutz Jaenicke]
5392 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
5393 length, instead of the encoding length to d2i_ASN1_OBJECT.
5396 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
5398 *) [In 0.9.6g-engine release:]
5399 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
5400 [Lynn Gazis <lgazis@rainbow.com>]
5402 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
5404 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
5405 and get fix the header length calculation.
5406 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
5407 Alon Kantor <alonk@checkpoint.com> (and others),
5410 *) Use proper error handling instead of 'assertions' in buffer
5411 overflow checks added in 0.9.6e. This prevents DoS (the
5412 assertions could call abort()).
5413 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
5415 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
5417 *) Add various sanity checks to asn1_get_length() to reject
5418 the ASN1 length bytes if they exceed sizeof(long), will appear
5419 negative or the content length exceeds the length of the
5421 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5423 *) Fix cipher selection routines: ciphers without encryption had no flags
5424 for the cipher strength set and where therefore not handled correctly
5425 by the selection routines (PR #130).
5428 *) Fix EVP_dsa_sha macro.
5432 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
5433 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
5434 that was added in OpenSSL 0.9.6d.
5436 As the countermeasure turned out to be incompatible with some
5437 broken SSL implementations, the new option is part of SSL_OP_ALL.
5438 SSL_OP_ALL is usually employed when compatibility with weird SSL
5439 implementations is desired (e.g. '-bugs' option to 's_client' and
5440 's_server'), so the new option is automatically set in many
5444 *) Changes in security patch:
5446 Changes marked "(CHATS)" were sponsored by the Defense Advanced
5447 Research Projects Agency (DARPA) and Air Force Research Laboratory,
5448 Air Force Materiel Command, USAF, under agreement number
5451 *) Add various sanity checks to asn1_get_length() to reject
5452 the ASN1 length bytes if they exceed sizeof(long), will appear
5453 negative or the content length exceeds the length of the
5454 supplied buffer. (CVE-2002-0659)
5455 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5457 *) Assertions for various potential buffer overflows, not known to
5459 [Ben Laurie (CHATS)]
5461 *) Various temporary buffers to hold ASCII versions of integers were
5462 too small for 64 bit platforms. (CVE-2002-0655)
5463 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
5465 *) Remote buffer overflow in SSL3 protocol - an attacker could
5466 supply an oversized session ID to a client. (CVE-2002-0656)
5467 [Ben Laurie (CHATS)]
5469 *) Remote buffer overflow in SSL2 protocol - an attacker could
5470 supply an oversized client master key. (CVE-2002-0656)
5471 [Ben Laurie (CHATS)]
5473 Changes between 0.9.6c and 0.9.6d [9 May 2002]
5475 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
5476 encoded as NULL) with id-dsa-with-sha1.
5477 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
5479 *) Check various X509_...() return values in apps/req.c.
5480 [Nils Larsch <nla@trustcenter.de>]
5482 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
5483 an end-of-file condition would erronously be flagged, when the CRLF
5484 was just at the end of a processed block. The bug was discovered when
5485 processing data through a buffering memory BIO handing the data to a
5486 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
5487 <ptsekov@syntrex.com> and Nedelcho Stanev.
5490 *) Implement a countermeasure against a vulnerability recently found
5491 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
5492 before application data chunks to avoid the use of known IVs
5493 with data potentially chosen by the attacker.
5496 *) Fix length checks in ssl3_get_client_hello().
5499 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
5500 to prevent ssl3_read_internal() from incorrectly assuming that
5501 ssl3_read_bytes() found application data while handshake
5502 processing was enabled when in fact s->s3->in_read_app_data was
5503 merely automatically cleared during the initial handshake.
5504 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
5506 *) Fix object definitions for Private and Enterprise: they were not
5507 recognized in their shortname (=lowercase) representation. Extend
5508 obj_dat.pl to issue an error when using undefined keywords instead
5509 of silently ignoring the problem (Svenning Sorensen
5510 <sss@sss.dnsalias.net>).
5513 *) Fix DH_generate_parameters() so that it works for 'non-standard'
5514 generators, i.e. generators other than 2 and 5. (Previously, the
5515 code did not properly initialise the 'add' and 'rem' values to
5516 BN_generate_prime().)
5518 In the new general case, we do not insist that 'generator' is
5519 actually a primitive root: This requirement is rather pointless;
5520 a generator of the order-q subgroup is just as good, if not
5524 *) Map new X509 verification errors to alerts. Discovered and submitted by
5525 Tom Wu <tom@arcot.com>.
5528 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
5529 returning non-zero before the data has been completely received
5530 when using non-blocking I/O.
5531 [Bodo Moeller; problem pointed out by John Hughes]
5533 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
5534 [Ben Laurie, Lutz Jaenicke]
5536 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
5537 Yoram Zahavi <YoramZ@gilian.com>).
5540 *) Add information about CygWin 1.3 and on, and preserve proper
5541 configuration for the versions before that.
5542 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
5544 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
5545 check whether we deal with a copy of a session and do not delete from
5546 the cache in this case. Problem reported by "Izhar Shoshani Levi"
5547 <izhar@checkpoint.com>.
5550 *) Do not store session data into the internal session cache, if it
5551 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
5552 flag is set). Proposed by Aslam <aslam@funk.com>.
5555 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
5559 *) [In 0.9.6d-engine release:]
5560 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
5561 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
5563 *) Add the configuration target linux-s390x.
5564 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
5566 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
5567 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
5568 variable as an indication that a ClientHello message has been
5569 received. As the flag value will be lost between multiple
5570 invocations of ssl3_accept when using non-blocking I/O, the
5571 function may not be aware that a handshake has actually taken
5572 place, thus preventing a new session from being added to the
5575 To avoid this problem, we now set s->new_session to 2 instead of
5576 using a local variable.
5577 [Lutz Jaenicke, Bodo Moeller]
5579 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
5580 if the SSL_R_LENGTH_MISMATCH error is detected.
5581 [Geoff Thorpe, Bodo Moeller]
5583 *) New 'shared_ldflag' column in Configure platform table.
5586 *) Fix EVP_CIPHER_mode macro.
5587 ["Dan S. Camper" <dan@bti.net>]
5589 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
5590 type, we must throw them away by setting rr->length to 0.
5591 [D P Chang <dpc@qualys.com>]
5593 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
5595 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
5596 <Dominikus.Scherkl@biodata.com>. (The previous implementation
5597 worked incorrectly for those cases where range = 10..._2 and
5598 3*range is two bits longer than range.)
5601 *) Only add signing time to PKCS7 structures if it is not already
5605 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
5606 OBJ_ld_ce should be OBJ_id_ce.
5607 Also some ip-pda OIDs in crypto/objects/objects.txt were
5608 incorrect (cf. RFC 3039).
5609 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
5611 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
5612 returns early because it has nothing to do.
5613 [Andy Schneider <andy.schneider@bjss.co.uk>]
5615 *) [In 0.9.6c-engine release:]
5616 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
5617 [Andy Schneider <andy.schneider@bjss.co.uk>]
5619 *) [In 0.9.6c-engine release:]
5620 Add support for Cryptographic Appliance's keyserver technology.
5621 (Use engine 'keyclient')
5622 [Cryptographic Appliances and Geoff Thorpe]
5624 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
5625 is called via tools/c89.sh because arguments have to be
5626 rearranged (all '-L' options must appear before the first object
5628 [Richard Shapiro <rshapiro@abinitio.com>]
5630 *) [In 0.9.6c-engine release:]
5631 Add support for Broadcom crypto accelerator cards, backported
5633 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
5635 *) [In 0.9.6c-engine release:]
5636 Add support for SureWare crypto accelerator cards from
5637 Baltimore Technologies. (Use engine 'sureware')
5638 [Baltimore Technologies and Mark Cox]
5640 *) [In 0.9.6c-engine release:]
5641 Add support for crypto accelerator cards from Accelerated
5642 Encryption Processing, www.aep.ie. (Use engine 'aep')
5643 [AEP Inc. and Mark Cox]
5645 *) Add a configuration entry for gcc on UnixWare.
5646 [Gary Benson <gbenson@redhat.com>]
5648 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
5649 messages are stored in a single piece (fixed-length part and
5650 variable-length part combined) and fix various bugs found on the way.
5653 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
5654 instead. BIO_gethostbyname() does not know what timeouts are
5655 appropriate, so entries would stay in cache even when they have
5657 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
5659 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
5660 faced with a pathologically small ClientHello fragment that does
5661 not contain client_version: Instead of aborting with an error,
5662 simply choose the highest available protocol version (i.e.,
5663 TLS 1.0 unless it is disabled). In practice, ClientHello
5664 messages are never sent like this, but this change gives us
5665 strictly correct behaviour at least for TLS.
5668 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
5669 never resets s->method to s->ctx->method when called from within
5670 one of the SSL handshake functions.
5671 [Bodo Moeller; problem pointed out by Niko Baric]
5673 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
5674 (sent using the client's version number) if client_version is
5675 smaller than the protocol version in use. Also change
5676 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
5677 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
5678 the client will at least see that alert.
5681 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
5685 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
5686 client receives HelloRequest while in a handshake.
5687 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
5689 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
5690 should end in 'break', not 'goto end' which circuments various
5691 cleanups done in state SSL_ST_OK. But session related stuff
5692 must be disabled for SSL_ST_OK in the case that we just sent a
5695 Also avoid some overhead by not calling ssl_init_wbio_buffer()
5696 before just sending a HelloRequest.
5697 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
5699 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
5700 reveal whether illegal block cipher padding was found or a MAC
5701 verification error occured. (Neither SSLerr() codes nor alerts
5702 are directly visible to potential attackers, but the information
5703 may leak via logfiles.)
5705 Similar changes are not required for the SSL 2.0 implementation
5706 because the number of padding bytes is sent in clear for SSL 2.0,
5707 and the extra bytes are just ignored. However ssl/s2_pkt.c
5708 failed to verify that the purported number of padding bytes is in
5712 *) Add OpenUNIX-8 support including shared libraries
5713 (Boyd Lynn Gerber <gerberb@zenez.com>).
5716 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
5717 'wristwatch attack' using huge encoding parameters (cf.
5718 James H. Manger's CRYPTO 2001 paper). Note that the
5719 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
5720 encoding parameters and hence was not vulnerable.
5723 *) BN_sqr() bug fix.
5724 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
5726 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
5727 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
5728 followed by modular reduction.
5729 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
5731 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
5732 equivalent based on BN_pseudo_rand() instead of BN_rand().
5735 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
5736 This function was broken, as the check for a new client hello message
5737 to handle SGC did not allow these large messages.
5738 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
5741 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
5744 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
5745 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
5748 *) Rework the configuration and shared library support for Tru64 Unix.
5749 The configuration part makes use of modern compiler features and
5750 still retains old compiler behavior for those that run older versions
5751 of the OS. The shared library support part includes a variant that
5752 uses the RPATH feature, and is available through the special
5753 configuration target "alpha-cc-rpath", which will never be selected
5755 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
5757 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
5758 with the same message size as in ssl3_get_certificate_request().
5759 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
5760 messages might inadvertently be reject as too long.
5761 [Petr Lampa <lampa@fee.vutbr.cz>]
5763 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
5766 *) Modified SSL library such that the verify_callback that has been set
5767 specificly for an SSL object with SSL_set_verify() is actually being
5768 used. Before the change, a verify_callback set with this function was
5769 ignored and the verify_callback() set in the SSL_CTX at the time of
5770 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
5771 to allow the necessary settings.
5774 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
5775 explicitly to NULL, as at least on Solaris 8 this seems not always to be
5776 done automatically (in contradiction to the requirements of the C
5777 standard). This made problems when used from OpenSSH.
5780 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
5781 dh->length and always used
5783 BN_rand_range(priv_key, dh->p).
5785 BN_rand_range() is not necessary for Diffie-Hellman, and this
5786 specific range makes Diffie-Hellman unnecessarily inefficient if
5787 dh->length (recommended exponent length) is much smaller than the
5788 length of dh->p. We could use BN_rand_range() if the order of
5789 the subgroup was stored in the DH structure, but we only have
5794 BN_rand(priv_key, l, ...)
5796 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
5802 RSA_eay_public_encrypt
5803 RSA_eay_private_decrypt
5804 RSA_eay_private_encrypt (signing)
5805 RSA_eay_public_decrypt (signature verification)
5807 (default implementations for RSA_public_encrypt,
5808 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
5809 always reject numbers >= n.
5812 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
5813 to synchronize access to 'locking_thread'. This is necessary on
5814 systems where access to 'locking_thread' (an 'unsigned long'
5815 variable) is not atomic.
5818 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
5819 *before* setting the 'crypto_lock_rand' flag. The previous code had
5820 a race condition if 0 is a valid thread ID.
5821 [Travis Vitek <vitek@roguewave.com>]
5823 *) Add support for shared libraries under Irix.
5824 [Albert Chin-A-Young <china@thewrittenword.com>]
5826 *) Add configuration option to build on Linux on both big-endian and
5828 [Ralf Baechle <ralf@uni-koblenz.de>]
5830 *) Add the possibility to create shared libraries on HP-UX.
5833 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
5835 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
5836 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
5837 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
5838 PRNG state recovery was possible based on the output of
5839 one PRNG request appropriately sized to gain knowledge on
5840 'md' followed by enough consecutive 1-byte PRNG requests
5841 to traverse all of 'state'.
5843 1. When updating 'md_local' (the current thread's copy of 'md')
5844 during PRNG output generation, hash all of the previous
5845 'md_local' value, not just the half used for PRNG output.
5847 2. Make the number of bytes from 'state' included into the hash
5848 independent from the number of PRNG bytes requested.
5850 The first measure alone would be sufficient to avoid
5851 Markku-Juhani's attack. (Actually it had never occurred
5852 to me that the half of 'md_local' used for chaining was the
5853 half from which PRNG output bytes were taken -- I had always
5854 assumed that the secret half would be used.) The second
5855 measure makes sure that additional data from 'state' is never
5856 mixed into 'md_local' in small portions; this heuristically
5857 further strengthens the PRNG.
5860 *) Fix crypto/bn/asm/mips3.s.
5863 *) When only the key is given to "enc", the IV is undefined. Print out
5864 an error message in this case.
5867 *) Handle special case when X509_NAME is empty in X509 printing routines.
5870 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
5871 positive and less than q.
5874 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
5875 used: it isn't thread safe and the add_lock_callback should handle
5877 [Paul Rose <Paul.Rose@bridge.com>]
5879 *) Verify that incoming data obeys the block size in
5880 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
5884 [Ulf Möller, Bodo Möller]
5886 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
5887 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
5888 when fixing the server behaviour for backwards-compatible 'client
5889 hello' messages. (Note that the attack is impractical against
5890 SSL 3.0 and TLS 1.0 anyway because length and version checking
5891 means that the probability of guessing a valid ciphertext is
5892 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
5895 Before 0.9.5, the countermeasure (hide the error by generating a
5896 random 'decryption result') did not work properly because
5897 ERR_clear_error() was missing, meaning that SSL_get_error() would
5898 detect the supposedly ignored error.
5900 Both problems are now fixed.
5903 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
5904 (previously it was 1024).
5907 *) Fix for compatibility mode trust settings: ignore trust settings
5908 unless some valid trust or reject settings are present.
5911 *) Fix for blowfish EVP: its a variable length cipher.
5914 *) Fix various bugs related to DSA S/MIME verification. Handle missing
5915 parameters in DSA public key structures and return an error in the
5916 DSA routines if parameters are absent.
5919 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
5920 in the current directory if neither $RANDFILE nor $HOME was set.
5921 RAND_file_name() in 0.9.6a returned NULL in this case. This has
5922 caused some confusion to Windows users who haven't defined $HOME.
5923 Thus RAND_file_name() is changed again: e_os.h can define a
5924 DEFAULT_HOME, which will be used if $HOME is not set.
5925 For Windows, we use "C:"; on other platforms, we still require
5926 environment variables.
5928 *) Move 'if (!initialized) RAND_poll()' into regions protected by
5929 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
5930 having multiple threads call RAND_poll() concurrently.
5933 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
5934 combination of a flag and a thread ID variable.
5935 Otherwise while one thread is in ssleay_rand_bytes (which sets the
5936 flag), *other* threads can enter ssleay_add_bytes without obeying
5937 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
5938 that they do not hold after the first thread unsets add_do_not_lock).
5941 *) Change bctest again: '-x' expressions are not available in all
5945 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
5947 *) Fix a couple of memory leaks in PKCS7_dataDecode()
5948 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
5950 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
5951 the default extension for executables, if any. Also, make the perl
5952 scripts that use symlink() to test if it really exists and use "cp"
5953 if it doesn't. All this made OpenSSL compilable and installable in
5957 *) Fix for asn1_GetSequence() for indefinite length constructed data.
5958 If SEQUENCE is length is indefinite just set c->slen to the total
5959 amount of data available.
5960 [Steve Henson, reported by shige@FreeBSD.org]
5961 [This change does not apply to 0.9.7.]
5963 *) Change bctest to avoid here-documents inside command substitution
5964 (workaround for FreeBSD /bin/sh bug).
5965 For compatibility with Ultrix, avoid shell functions (introduced
5966 in the bctest version that searches along $PATH).
5969 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
5970 with des_encrypt() defined on some operating systems, like Solaris
5974 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
5975 On the Importance of Eliminating Errors in Cryptographic
5976 Computations, J. Cryptology 14 (2001) 2, 101-119,
5977 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
5980 *) MIPS assembler BIGNUM division bug fix.
5983 *) Disabled incorrect Alpha assembler code.
5986 *) Fix PKCS#7 decode routines so they correctly update the length
5987 after reading an EOC for the EXPLICIT tag.
5989 [This change does not apply to 0.9.7.]
5991 *) Fix bug in PKCS#12 key generation routines. This was triggered
5992 if a 3DES key was generated with a 0 initial byte. Include
5993 PKCS12_BROKEN_KEYGEN compilation option to retain the old
5994 (but broken) behaviour.
5997 *) Enhance bctest to search for a working bc along $PATH and print
5999 [Tim Rice <tim@multitalents.net> via Richard Levitte]
6001 *) Fix memory leaks in err.c: free err_data string if necessary;
6002 don't write to the wrong index in ERR_set_error_data.
6005 *) Implement ssl23_peek (analogous to ssl23_read), which previously
6009 *) Replace rdtsc with _emit statements for VC++ version 5.
6010 [Jeremy Cooper <jeremy@baymoo.org>]
6012 *) Make it possible to reuse SSLv2 sessions.
6015 *) In copy_email() check for >= 0 as a return value for
6016 X509_NAME_get_index_by_NID() since 0 is a valid index.
6017 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
6019 *) Avoid coredump with unsupported or invalid public keys by checking if
6020 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
6021 PKCS7_verify() fails with non detached data.
6024 *) Don't use getenv in library functions when run as setuid/setgid.
6025 New function OPENSSL_issetugid().
6028 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
6029 due to incorrect handling of multi-threading:
6031 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
6033 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
6035 3. Count how many times MemCheck_off() has been called so that
6036 nested use can be treated correctly. This also avoids
6037 inband-signalling in the previous code (which relied on the
6038 assumption that thread ID 0 is impossible).
6041 *) Add "-rand" option also to s_client and s_server.
6044 *) Fix CPU detection on Irix 6.x.
6045 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
6046 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6048 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
6051 [This change does not apply to 0.9.7.]
6053 *) Use the cached encoding of an X509_NAME structure rather than
6054 copying it. This is apparently the reason for the libsafe "errors"
6055 but the code is actually correct.
6058 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
6059 Bleichenbacher's DSA attack.
6060 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
6061 to be set and top=0 forces the highest bit to be set; top=-1 is new
6062 and leaves the highest bit random.
6063 [Ulf Moeller, Bodo Moeller]
6065 *) In the NCONF_...-based implementations for CONF_... queries
6066 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
6067 a temporary CONF structure with the data component set to NULL
6068 (which gives segmentation faults in lh_retrieve).
6069 Instead, use NULL for the CONF pointer in CONF_get_string and
6070 CONF_get_number (which may use environment variables) and directly
6071 return NULL from CONF_get_section.
6074 *) Fix potential buffer overrun for EBCDIC.
6077 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
6078 keyUsage if basicConstraints absent for a CA.
6081 *) Make SMIME_write_PKCS7() write mail header values with a format that
6082 is more generally accepted (no spaces before the semicolon), since
6083 some programs can't parse those values properly otherwise. Also make
6084 sure BIO's that break lines after each write do not create invalid
6088 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
6089 macros previously used would not encode an empty SEQUENCE OF
6090 and break the signature.
6092 [This change does not apply to 0.9.7.]
6094 *) Zero the premaster secret after deriving the master secret in
6098 *) Add some EVP_add_digest_alias registrations (as found in
6099 OpenSSL_add_all_digests()) to SSL_library_init()
6100 aka OpenSSL_add_ssl_algorithms(). This provides improved
6101 compatibility with peers using X.509 certificates
6102 with unconventional AlgorithmIdentifier OIDs.
6105 *) Fix for Irix with NO_ASM.
6106 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6108 *) ./config script fixes.
6109 [Ulf Moeller, Richard Levitte]
6111 *) Fix 'openssl passwd -1'.
6114 *) Change PKCS12_key_gen_asc() so it can cope with non null
6115 terminated strings whose length is passed in the passlen
6116 parameter, for example from PEM callbacks. This was done
6117 by adding an extra length parameter to asc2uni().
6118 [Steve Henson, reported by <oddissey@samsung.co.kr>]
6120 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
6121 call failed, free the DSA structure.
6124 *) Fix to uni2asc() to cope with zero length Unicode strings.
6125 These are present in some PKCS#12 files.
6128 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
6129 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
6130 when writing a 32767 byte record.
6131 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
6133 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
6134 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
6136 (RSA objects have a reference count access to which is protected
6137 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
6138 so they are meant to be shared between threads.)
6139 [Bodo Moeller, Geoff Thorpe; original patch submitted by
6140 "Reddie, Steven" <Steven.Reddie@ca.com>]
6142 *) Fix a deadlock in CRYPTO_mem_leaks().
6145 *) Use better test patterns in bntest.
6148 *) rand_win.c fix for Borland C.
6151 *) BN_rshift bugfix for n == 0.
6154 *) Add a 'bctest' script that checks for some known 'bc' bugs
6155 so that 'make test' does not abort just because 'bc' is broken.
6158 *) Store verify_result within SSL_SESSION also for client side to
6159 avoid potential security hole. (Re-used sessions on the client side
6160 always resulted in verify_result==X509_V_OK, not using the original
6161 result of the server certificate verification.)
6164 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
6165 SSL3_RT_APPLICATION_DATA, return 0.
6166 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
6170 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
6171 releases, have been re-implemented by renaming the previous
6172 implementations of ssl2_read and ssl3_read to ssl2_read_internal
6173 and ssl3_read_internal, respectively, and adding 'peek' parameters
6174 to them. The new ssl[23]_{read,peek} functions are calls to
6175 ssl[23]_read_internal with the 'peek' flag set appropriately.
6176 A 'peek' parameter has also been added to ssl3_read_bytes, which
6177 does the actual work for ssl3_read_internal.
6180 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
6181 the method-specific "init()" handler. Also clean up ex_data after
6182 calling the method-specific "finish()" handler. Previously, this was
6183 happening the other way round.
6186 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
6187 The previous value, 12, was not always sufficient for BN_mod_exp().
6190 *) Make sure that shared libraries get the internal name engine with
6191 the full version number and not just 0. This should mark the
6192 shared libraries as not backward compatible. Of course, this should
6193 be changed again when we can guarantee backward binary compatibility.
6196 *) Fix typo in get_cert_by_subject() in by_dir.c
6197 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
6199 *) Rework the system to generate shared libraries:
6201 - Make note of the expected extension for the shared libraries and
6202 if there is a need for symbolic links from for example libcrypto.so.0
6203 to libcrypto.so.0.9.7. There is extended info in Configure for
6206 - Make as few rebuilds of the shared libraries as possible.
6208 - Still avoid linking the OpenSSL programs with the shared libraries.
6210 - When installing, install the shared libraries separately from the
6214 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
6216 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
6217 and not in SSL_clear because the latter is also used by the
6218 accept/connect functions; previously, the settings made by
6219 SSL_set_read_ahead would be lost during the handshake.
6220 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
6222 *) Correct util/mkdef.pl to be selective about disabled algorithms.
6223 Previously, it would create entries for disableed algorithms no
6227 *) Added several new manual pages for SSL_* function.
6230 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
6232 *) In ssl23_get_client_hello, generate an error message when faced
6233 with an initial SSL 3.0/TLS record that is too small to contain the
6234 first two bytes of the ClientHello message, i.e. client_version.
6235 (Note that this is a pathologic case that probably has never happened
6236 in real life.) The previous approach was to use the version number
6237 from the record header as a substitute; but our protocol choice
6238 should not depend on that one because it is not authenticated
6239 by the Finished messages.
6242 *) More robust randomness gathering functions for Windows.
6243 [Jeffrey Altman <jaltman@columbia.edu>]
6245 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
6246 not set then we don't setup the error code for issuer check errors
6247 to avoid possibly overwriting other errors which the callback does
6248 handle. If an application does set the flag then we assume it knows
6249 what it is doing and can handle the new informational codes
6253 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
6254 a general "ANY" type, as such it should be able to decode anything
6255 including tagged types. However it didn't check the class so it would
6256 wrongly interpret tagged types in the same way as their universal
6257 counterpart and unknown types were just rejected. Changed so that the
6258 tagged and unknown types are handled in the same way as a SEQUENCE:
6259 that is the encoding is stored intact. There is also a new type
6260 "V_ASN1_OTHER" which is used when the class is not universal, in this
6261 case we have no idea what the actual type is so we just lump them all
6265 *) On VMS, stdout may very well lead to a file that is written to
6266 in a record-oriented fashion. That means that every write() will
6267 write a separate record, which will be read separately by the
6268 programs trying to read from it. This can be very confusing.
6270 The solution is to put a BIO filter in the way that will buffer
6271 text until a linefeed is reached, and then write everything a
6272 line at a time, so every record written will be an actual line,
6273 not chunks of lines and not (usually doesn't happen, but I've
6274 seen it once) several lines in one record. BIO_f_linebuffer() is
6277 Currently, it's a VMS-only method, because that's where it has
6278 been tested well enough.
6281 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
6282 it can return incorrect results.
6283 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
6284 but it was in 0.9.6-beta[12].)
6287 *) Disable the check for content being present when verifying detached
6288 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
6289 include zero length content when signing messages.
6292 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
6293 BIO_ctrl (for BIO pairs).
6296 *) Add DSO method for VMS.
6299 *) Bug fix: Montgomery multiplication could produce results with the
6303 *) Add RPM specification openssl.spec and modify it to build three
6304 packages. The default package contains applications, application
6305 documentation and run-time libraries. The devel package contains
6306 include files, static libraries and function documentation. The
6307 doc package contains the contents of the doc directory. The original
6308 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
6311 *) Add a large number of documentation files for many SSL routines.
6312 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
6314 *) Add a configuration entry for Sony News 4.
6315 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
6317 *) Don't set the two most significant bits to one when generating a
6318 random number < q in the DSA library.
6321 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
6322 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
6323 the underlying transport is blocking) if a handshake took place.
6324 (The default behaviour is needed by applications such as s_client
6325 and s_server that use select() to determine when to use SSL_read;
6326 but for applications that know in advance when to expect data, it
6327 just makes things more complicated.)
6330 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
6334 *) Add a few more EBCDIC conditionals that make `req' and `x509'
6335 work better on such systems.
6336 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6338 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
6339 Update PKCS12_parse() so it copies the friendlyName and the
6340 keyid to the certificates aux info.
6343 *) Fix bug in PKCS7_verify() which caused an infinite loop
6344 if there was more than one signature.
6345 [Sven Uszpelkat <su@celocom.de>]
6347 *) Major change in util/mkdef.pl to include extra information
6348 about each symbol, as well as presentig variables as well
6349 as functions. This change means that there's n more need
6350 to rebuild the .num files when some algorithms are excluded.
6353 *) Allow the verify time to be set by an application,
6354 rather than always using the current time.
6357 *) Phase 2 verify code reorganisation. The certificate
6358 verify code now looks up an issuer certificate by a
6359 number of criteria: subject name, authority key id
6360 and key usage. It also verifies self signed certificates
6361 by the same criteria. The main comparison function is
6362 X509_check_issued() which performs these checks.
6364 Lot of changes were necessary in order to support this
6365 without completely rewriting the lookup code.
6367 Authority and subject key identifier are now cached.
6369 The LHASH 'certs' is X509_STORE has now been replaced
6370 by a STACK_OF(X509_OBJECT). This is mainly because an
6371 LHASH can't store or retrieve multiple objects with
6372 the same hash value.
6374 As a result various functions (which were all internal
6375 use only) have changed to handle the new X509_STORE
6376 structure. This will break anything that messed round
6377 with X509_STORE internally.
6379 The functions X509_STORE_add_cert() now checks for an
6380 exact match, rather than just subject name.
6382 The X509_STORE API doesn't directly support the retrieval
6383 of multiple certificates matching a given criteria, however
6384 this can be worked round by performing a lookup first
6385 (which will fill the cache with candidate certificates)
6386 and then examining the cache for matches. This is probably
6387 the best we can do without throwing out X509_LOOKUP
6388 entirely (maybe later...).
6390 The X509_VERIFY_CTX structure has been enhanced considerably.
6392 All certificate lookup operations now go via a get_issuer()
6393 callback. Although this currently uses an X509_STORE it
6394 can be replaced by custom lookups. This is a simple way
6395 to bypass the X509_STORE hackery necessary to make this
6396 work and makes it possible to use more efficient techniques
6397 in future. A very simple version which uses a simple
6398 STACK for its trusted certificate store is also provided
6399 using X509_STORE_CTX_trusted_stack().
6401 The verify_cb() and verify() callbacks now have equivalents
6402 in the X509_STORE_CTX structure.
6404 X509_STORE_CTX also has a 'flags' field which can be used
6405 to customise the verify behaviour.
6408 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
6409 excludes S/MIME capabilities.
6412 *) When a certificate request is read in keep a copy of the
6413 original encoding of the signed data and use it when outputing
6414 again. Signatures then use the original encoding rather than
6415 a decoded, encoded version which may cause problems if the
6416 request is improperly encoded.
6419 *) For consistency with other BIO_puts implementations, call
6420 buffer_write(b, ...) directly in buffer_puts instead of calling
6423 In BIO_puts, increment b->num_write as in BIO_write.
6424 [Peter.Sylvester@EdelWeb.fr]
6426 *) Fix BN_mul_word for the case where the word is 0. (We have to use
6427 BN_zero, we may not return a BIGNUM with an array consisting of
6431 *) Avoid calling abort() from within the library when problems are
6432 detected, except if preprocessor symbols have been defined
6433 (such as REF_CHECK, BN_DEBUG etc.).
6436 *) New openssl application 'rsautl'. This utility can be
6437 used for low level RSA operations. DER public key
6438 BIO/fp routines also added.
6441 *) New Configure entry and patches for compiling on QNX 4.
6442 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
6444 *) A demo state-machine implementation was sponsored by
6445 Nuron (http://www.nuron.com/) and is now available in
6446 demos/state_machine.
6449 *) New options added to the 'dgst' utility for signature
6450 generation and verification.
6453 *) Unrecognized PKCS#7 content types are now handled via a
6454 catch all ASN1_TYPE structure. This allows unsupported
6455 types to be stored as a "blob" and an application can
6456 encode and decode it manually.
6459 *) Fix various signed/unsigned issues to make a_strex.c
6461 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
6463 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
6464 length if passed a buffer. ASN1_INTEGER_to_BN failed
6465 if passed a NULL BN and its argument was negative.
6466 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
6468 *) Modification to PKCS#7 encoding routines to output definite
6469 length encoding. Since currently the whole structures are in
6470 memory there's not real point in using indefinite length
6471 constructed encoding. However if OpenSSL is compiled with
6472 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
6475 *) Added BIO_vprintf() and BIO_vsnprintf().
6478 *) Added more prefixes to parse for in the the strings written
6479 through a logging bio, to cover all the levels that are available
6480 through syslog. The prefixes are now:
6482 PANIC, EMERG, EMR => LOG_EMERG
6483 ALERT, ALR => LOG_ALERT
6484 CRIT, CRI => LOG_CRIT
6485 ERROR, ERR => LOG_ERR
6486 WARNING, WARN, WAR => LOG_WARNING
6487 NOTICE, NOTE, NOT => LOG_NOTICE
6488 INFO, INF => LOG_INFO
6489 DEBUG, DBG => LOG_DEBUG
6491 and as before, if none of those prefixes are present at the
6492 beginning of the string, LOG_ERR is chosen.
6494 On Win32, the LOG_* levels are mapped according to this:
6496 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
6497 LOG_WARNING => EVENTLOG_WARNING_TYPE
6498 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
6502 *) Made it possible to reconfigure with just the configuration
6503 argument "reconf" or "reconfigure". The command line arguments
6504 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
6505 and are retrieved from there when reconfiguring.
6509 [Assar Westerlund <assar@sics.se>, Richard Levitte]
6511 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
6514 *) The obj_dat.pl script was messing up the sorting of object
6515 names. The reason was that it compared the quoted version
6516 of strings as a result "OCSP" > "OCSP Signing" because
6517 " > SPACE. Changed script to store unquoted versions of
6518 names and add quotes on output. It was also omitting some
6519 names from the lookup table if they were given a default
6520 value (that is if SN is missing it is given the same
6521 value as LN and vice versa), these are now added on the
6522 grounds that if an object has a name we should be able to
6523 look it up. Finally added warning output when duplicate
6524 short or long names are found.
6527 *) Changes needed for Tandem NSK.
6528 [Scott Uroff <scott@xypro.com>]
6530 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
6531 RSA_padding_check_SSLv23(), special padding was never detected
6532 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
6533 version rollback attacks was not effective.
6535 In s23_clnt.c, don't use special rollback-attack detection padding
6536 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
6537 client; similarly, in s23_srvr.c, don't do the rollback check if
6538 SSL 2.0 is the only protocol enabled in the server.
6541 *) Make it possible to get hexdumps of unprintable data with 'openssl
6542 asn1parse'. By implication, the functions ASN1_parse_dump() and
6543 BIO_dump_indent() are added.
6546 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
6547 these print out strings and name structures based on various
6548 flags including RFC2253 support and proper handling of
6549 multibyte characters. Added options to the 'x509' utility
6550 to allow the various flags to be set.
6553 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
6554 Also change the functions X509_cmp_current_time() and
6555 X509_gmtime_adj() work with an ASN1_TIME structure,
6556 this will enable certificates using GeneralizedTime in validity
6557 dates to be checked.
6560 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
6561 negative public key encodings) on by default,
6562 NO_NEG_PUBKEY_BUG can be set to disable it.
6565 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
6566 content octets. An i2c_ASN1_OBJECT is unnecessary because
6567 the encoding can be trivially obtained from the structure.
6570 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
6571 not read locks (CRYPTO_r_[un]lock).
6574 *) A first attempt at creating official support for shared
6575 libraries through configuration. I've kept it so the
6576 default is static libraries only, and the OpenSSL programs
6577 are always statically linked for now, but there are
6578 preparations for dynamic linking in place.
6579 This has been tested on Linux and Tru64.
6582 *) Randomness polling function for Win9x, as described in:
6583 Peter Gutmann, Software Generation of Practically Strong
6587 *) Fix so PRNG is seeded in req if using an already existing
6591 *) New options to smime application. -inform and -outform
6592 allow alternative formats for the S/MIME message including
6593 PEM and DER. The -content option allows the content to be
6594 specified separately. This should allow things like Netscape
6595 form signing output easier to verify.
6598 *) Fix the ASN1 encoding of tags using the 'long form'.
6601 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
6602 STRING types. These convert content octets to and from the
6603 underlying type. The actual tag and length octets are
6604 already assumed to have been read in and checked. These
6605 are needed because all other string types have virtually
6606 identical handling apart from the tag. By having versions
6607 of the ASN1 functions that just operate on content octets
6608 IMPLICIT tagging can be handled properly. It also allows
6609 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
6610 and ASN1_INTEGER are identical apart from the tag.
6613 *) Change the handling of OID objects as follows:
6615 - New object identifiers are inserted in objects.txt, following
6616 the syntax given in objects.README.
6617 - objects.pl is used to process obj_mac.num and create a new
6619 - obj_dat.pl is used to create a new obj_dat.h, using the data in
6622 This is currently kind of a hack, and the perl code in objects.pl
6623 isn't very elegant, but it works as I intended. The simplest way
6624 to check that it worked correctly is to look in obj_dat.h and
6625 check the array nid_objs and make sure the objects haven't moved
6626 around (this is important!). Additions are OK, as well as
6627 consistent name changes.
6630 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
6633 *) Addition of the command line parameter '-rand file' to 'openssl req'.
6634 The given file adds to whatever has already been seeded into the
6635 random pool through the RANDFILE configuration file option or
6636 environment variable, or the default random state file.
6639 *) mkstack.pl now sorts each macro group into lexical order.
6640 Previously the output order depended on the order the files
6641 appeared in the directory, resulting in needless rewriting
6645 *) Patches to make OpenSSL compile under Win32 again. Mostly
6646 work arounds for the VC++ problem that it treats func() as
6647 func(void). Also stripped out the parts of mkdef.pl that
6648 added extra typesafe functions: these no longer exist.
6651 *) Reorganisation of the stack code. The macros are now all
6652 collected in safestack.h . Each macro is defined in terms of
6653 a "stack macro" of the form SKM_<name>(type, a, b). The
6654 DEBUG_SAFESTACK is now handled in terms of function casts,
6655 this has the advantage of retaining type safety without the
6656 use of additional functions. If DEBUG_SAFESTACK is not defined
6657 then the non typesafe macros are used instead. Also modified the
6658 mkstack.pl script to handle the new form. Needs testing to see
6659 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
6660 the default if no major problems. Similar behaviour for ASN1_SET_OF
6661 and PKCS12_STACK_OF.
6664 *) When some versions of IIS use the 'NET' form of private key the
6665 key derivation algorithm is different. Normally MD5(password) is
6666 used as a 128 bit RC4 key. In the modified case
6667 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
6668 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
6669 as the old Netscape_RSA functions except they have an additional
6670 'sgckey' parameter which uses the modified algorithm. Also added
6671 an -sgckey command line option to the rsa utility. Thanks to
6672 Adrian Peck <bertie@ncipher.com> for posting details of the modified
6673 algorithm to openssl-dev.
6676 *) The evp_local.h macros were using 'c.##kname' which resulted in
6677 invalid expansion on some systems (SCO 5.0.5 for example).
6678 Corrected to 'c.kname'.
6679 [Phillip Porch <root@theporch.com>]
6681 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
6682 a STACK of email addresses from a certificate or request, these look
6683 in the subject name and the subject alternative name extensions and
6684 omit any duplicate addresses.
6687 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
6688 This makes DSA verification about 2 % faster.
6691 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
6692 (meaning that now 2^5 values will be precomputed, which is only 4 KB
6693 plus overhead for 1024 bit moduli).
6694 This makes exponentiations about 0.5 % faster for 1024 bit
6695 exponents (as measured by "openssl speed rsa2048").
6698 *) Rename memory handling macros to avoid conflicts with other
6700 Malloc => OPENSSL_malloc
6701 Malloc_locked => OPENSSL_malloc_locked
6702 Realloc => OPENSSL_realloc
6703 Free => OPENSSL_free
6706 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
6707 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
6710 *) CygWin32 support.
6711 [John Jarvie <jjarvie@newsguy.com>]
6713 *) The type-safe stack code has been rejigged. It is now only compiled
6714 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
6715 by default all type-specific stack functions are "#define"d back to
6716 standard stack functions. This results in more streamlined output
6717 but retains the type-safety checking possibilities of the original
6721 *) The STACK code has been cleaned up, and certain type declarations
6722 that didn't make a lot of sense have been brought in line. This has
6723 also involved a cleanup of sorts in safestack.h to more correctly
6724 map type-safe stack functions onto their plain stack counterparts.
6725 This work has also resulted in a variety of "const"ifications of
6726 lots of the code, especially "_cmp" operations which should normally
6727 be prototyped with "const" parameters anyway.
6730 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
6731 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
6732 (The PRNG state consists of two parts, the large pool 'state' and 'md',
6733 where all of 'md' is used each time the PRNG is used, but 'state'
6734 is used only indexed by a cyclic counter. As entropy may not be
6735 well distributed from the beginning, 'md' is important as a
6736 chaining variable. However, the output function chains only half
6737 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
6738 all of 'md', and seeding with STATE_SIZE dummy bytes will result
6739 in all of 'state' being rewritten, with the new values depending
6740 on virtually all of 'md'. This overcomes the 80 bit limitation.)
6743 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
6744 the handshake is continued after ssl_verify_cert_chain();
6745 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
6746 can lead to 'unexplainable' connection aborts later.
6747 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
6749 *) Major EVP API cipher revision.
6750 Add hooks for extra EVP features. This allows various cipher
6751 parameters to be set in the EVP interface. Support added for variable
6752 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
6753 setting of RC2 and RC5 parameters.
6755 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
6758 Remove lots of duplicated code from the EVP library. For example *every*
6759 cipher init() function handles the 'iv' in the same way according to the
6760 cipher mode. They also all do nothing if the 'key' parameter is NULL and
6761 for CFB and OFB modes they zero ctx->num.
6763 New functionality allows removal of S/MIME code RC2 hack.
6765 Most of the routines have the same form and so can be declared in terms
6768 By shifting this to the top level EVP_CipherInit() it can be removed from
6769 all individual ciphers. If the cipher wants to handle IVs or keys
6770 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
6773 Change lots of functions like EVP_EncryptUpdate() to now return a
6774 value: although software versions of the algorithms cannot fail
6775 any installed hardware versions can.
6778 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
6779 this option is set, tolerate broken clients that send the negotiated
6780 protocol version number instead of the requested protocol version
6784 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
6785 i.e. non-zero for export ciphersuites, zero otherwise.
6786 Previous versions had this flag inverted, inconsistent with
6787 rsa_tmp_cb (..._TMP_RSA_CB).
6788 [Bodo Moeller; problem reported by Amit Chopra]
6790 *) Add missing DSA library text string. Work around for some IIS
6791 key files with invalid SEQUENCE encoding.
6794 *) Add a document (doc/standards.txt) that list all kinds of standards
6795 and so on that are implemented in OpenSSL.
6798 *) Enhance c_rehash script. Old version would mishandle certificates
6799 with the same subject name hash and wouldn't handle CRLs at all.
6800 Added -fingerprint option to crl utility, to support new c_rehash
6804 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
6807 *) Fix for SSL server purpose checking. Server checking was
6808 rejecting certificates which had extended key usage present
6809 but no ssl client purpose.
6810 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
6812 *) Make PKCS#12 code work with no password. The PKCS#12 spec
6813 is a little unclear about how a blank password is handled.
6814 Since the password in encoded as a BMPString with terminating
6815 double NULL a zero length password would end up as just the
6816 double NULL. However no password at all is different and is
6817 handled differently in the PKCS#12 key generation code. NS
6818 treats a blank password as zero length. MSIE treats it as no
6819 password on export: but it will try both on import. We now do
6820 the same: PKCS12_parse() tries zero length and no password if
6821 the password is set to "" or NULL (NULL is now a valid password:
6822 it wasn't before) as does the pkcs12 application.
6825 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
6826 perror when PEM_read_bio_X509_REQ fails, the error message must
6827 be obtained from the error queue.
6830 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
6831 it in ERR_remove_state if appropriate, and change ERR_get_state
6832 accordingly to avoid race conditions (this is necessary because
6833 thread_hash is no longer constant once set).
6836 *) Bugfix for linux-elf makefile.one.
6839 *) RSA_get_default_method() will now cause a default
6840 RSA_METHOD to be chosen if one doesn't exist already.
6841 Previously this was only set during a call to RSA_new()
6842 or RSA_new_method(NULL) meaning it was possible for
6843 RSA_get_default_method() to return NULL.
6846 *) Added native name translation to the existing DSO code
6847 that will convert (if the flag to do so is set) filenames
6848 that are sufficiently small and have no path information
6849 into a canonical native form. Eg. "blah" converted to
6850 "libblah.so" or "blah.dll" etc.
6853 *) New function ERR_error_string_n(e, buf, len) which is like
6854 ERR_error_string(e, buf), but writes at most 'len' bytes
6855 including the 0 terminator. For ERR_error_string_n, 'buf'
6857 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
6859 *) CONF library reworked to become more general. A new CONF
6860 configuration file reader "class" is implemented as well as a
6861 new functions (NCONF_*, for "New CONF") to handle it. The now
6862 old CONF_* functions are still there, but are reimplemented to
6863 work in terms of the new functions. Also, a set of functions
6864 to handle the internal storage of the configuration data is
6865 provided to make it easier to write new configuration file
6866 reader "classes" (I can definitely see something reading a
6867 configuration file in XML format, for example), called _CONF_*,
6868 or "the configuration storage API"...
6870 The new configuration file reading functions are:
6872 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
6873 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
6875 NCONF_default, NCONF_WIN32
6877 NCONF_dump_fp, NCONF_dump_bio
6879 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
6880 NCONF_new creates a new CONF object. This works in the same way
6881 as other interfaces in OpenSSL, like the BIO interface.
6882 NCONF_dump_* dump the internal storage of the configuration file,
6883 which is useful for debugging. All other functions take the same
6884 arguments as the old CONF_* functions wth the exception of the
6885 first that must be a `CONF *' instead of a `LHASH *'.
6887 To make it easer to use the new classes with the old CONF_* functions,
6888 the function CONF_set_default_method is provided.
6891 *) Add '-tls1' option to 'openssl ciphers', which was already
6892 mentioned in the documentation but had not been implemented.
6893 (This option is not yet really useful because even the additional
6894 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
6897 *) Initial DSO code added into libcrypto for letting OpenSSL (and
6898 OpenSSL-based applications) load shared libraries and bind to
6899 them in a portable way.
6900 [Geoff Thorpe, with contributions from Richard Levitte]
6902 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
6904 *) Make sure _lrotl and _lrotr are only used with MSVC.
6906 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
6907 (the default implementation of RAND_status).
6909 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
6910 to '-clrext' (= clear extensions), as intended and documented.
6911 [Bodo Moeller; inconsistency pointed out by Michael Attili
6914 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
6915 was larger than the MD block size.
6916 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
6918 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
6919 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
6920 using the passed key: if the passed key was a private key the result
6921 of X509_print(), for example, would be to print out all the private key
6925 *) des_quad_cksum() byte order bug fix.
6926 [Ulf Möller, using the problem description in krb4-0.9.7, where
6927 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
6929 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
6931 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
6933 *) For easily testing in shell scripts whether some command
6934 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
6935 returns with exit code 0 iff no command of the given name is available.
6936 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
6937 the output goes to stdout and nothing is printed to stderr.
6938 Additional arguments are always ignored.
6940 Since for each cipher there is a command of the same name,
6941 the 'no-cipher' compilation switches can be tested this way.
6943 ('openssl no-XXX' is not able to detect pseudo-commands such
6944 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
6947 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
6950 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
6951 is set; it will be thrown away anyway because each handshake creates
6953 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
6954 to parameters -- in previous versions (since OpenSSL 0.9.3) the
6955 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
6956 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
6959 *) New s_client option -ign_eof: EOF at stdin is ignored, and
6960 'Q' and 'R' lose their special meanings (quit/renegotiate).
6961 This is part of what -quiet does; unlike -quiet, -ign_eof
6962 does not suppress any output.
6965 *) Add compatibility options to the purpose and trust code. The
6966 purpose X509_PURPOSE_ANY is "any purpose" which automatically
6967 accepts a certificate or CA, this was the previous behaviour,
6968 with all the associated security issues.
6970 X509_TRUST_COMPAT is the old trust behaviour: only and
6971 automatically trust self signed roots in certificate store. A
6972 new trust setting X509_TRUST_DEFAULT is used to specify that
6973 a purpose has no associated trust setting and it should instead
6974 use the value in the default purpose.
6977 *) Fix the PKCS#8 DSA private key code so it decodes keys again
6978 and fix a memory leak.
6981 *) In util/mkerr.pl (which implements 'make errors'), preserve
6982 reason strings from the previous version of the .c file, as
6983 the default to have only downcase letters (and digits) in
6984 automatically generated reasons codes is not always appropriate.
6987 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
6988 using strerror. Previously, ERR_reason_error_string() returned
6989 library names as reason strings for SYSerr; but SYSerr is a special
6990 case where small numbers are errno values, not library numbers.
6993 *) Add '-dsaparam' option to 'openssl dhparam' application. This
6994 converts DSA parameters into DH parameters. (When creating parameters,
6995 DSA_generate_parameters is used.)
6998 *) Include 'length' (recommended exponent length) in C code generated
6999 by 'openssl dhparam -C'.
7002 *) The second argument to set_label in perlasm was already being used
7003 so couldn't be used as a "file scope" flag. Moved to third argument
7007 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
7008 instead of RAND_bytes for encryption IVs and salts.
7011 *) Include RAND_status() into RAND_METHOD instead of implementing
7012 it only for md_rand.c Otherwise replacing the PRNG by calling
7013 RAND_set_rand_method would be impossible.
7016 *) Don't let DSA_generate_key() enter an infinite loop if the random
7017 number generation fails.
7020 *) New 'rand' application for creating pseudo-random output.
7023 *) Added configuration support for Linux/IA64
7024 [Rolf Haberrecker <rolf@suse.de>]
7026 *) Assembler module support for Mingw32.
7029 *) Shared library support for HPUX (in shlib/).
7030 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
7032 *) Shared library support for Solaris gcc.
7033 [Lutz Behnke <behnke@trustcenter.de>]
7035 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
7037 *) PKCS7_encrypt() was adding text MIME headers twice because they
7038 were added manually and by SMIME_crlf_copy().
7041 *) In bntest.c don't call BN_rand with zero bits argument.
7042 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
7044 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
7045 case was implemented. This caused BN_div_recp() to fail occasionally.
7048 *) Add an optional second argument to the set_label() in the perl
7049 assembly language builder. If this argument exists and is set
7050 to 1 it signals that the assembler should use a symbol whose
7051 scope is the entire file, not just the current function. This
7052 is needed with MASM which uses the format label:: for this scope.
7053 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
7055 *) Change the ASN1 types so they are typedefs by default. Before
7056 almost all types were #define'd to ASN1_STRING which was causing
7057 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
7061 *) Change names of new functions to the new get1/get0 naming
7062 convention: After 'get1', the caller owns a reference count
7063 and has to call ..._free; 'get0' returns a pointer to some
7064 data structure without incrementing reference counters.
7065 (Some of the existing 'get' functions increment a reference
7066 counter, some don't.)
7067 Similarly, 'set1' and 'add1' functions increase reference
7068 counters or duplicate objects.
7071 *) Allow for the possibility of temp RSA key generation failure:
7072 the code used to assume it always worked and crashed on failure.
7075 *) Fix potential buffer overrun problem in BIO_printf().
7076 [Ulf Möller, using public domain code by Patrick Powell; problem
7077 pointed out by David Sacerdote <das33@cornell.edu>]
7079 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
7080 RAND_egd() and RAND_status(). In the command line application,
7081 the EGD socket can be specified like a seed file using RANDFILE
7085 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
7086 Some CAs (e.g. Verisign) distribute certificates in this form.
7089 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
7090 list to exclude them. This means that no special compilation option
7091 is needed to use anonymous DH: it just needs to be included in the
7095 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
7096 EVP_MD_type. The old functionality is available in a new macro called
7097 EVP_MD_md(). Change code that uses it and update docs.
7100 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
7101 where the 'void *' argument is replaced by a function pointer argument.
7102 Previously 'void *' was abused to point to functions, which works on
7103 many platforms, but is not correct. As these functions are usually
7104 called by macros defined in OpenSSL header files, most source code
7105 should work without changes.
7108 *) <openssl/opensslconf.h> (which is created by Configure) now contains
7109 sections with information on -D... compiler switches used for
7110 compiling the library so that applications can see them. To enable
7111 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
7112 must be defined. E.g.,
7113 #define OPENSSL_ALGORITHM_DEFINES
7114 #include <openssl/opensslconf.h>
7115 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
7116 [Richard Levitte, Ulf and Bodo Möller]
7118 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
7122 *) Change the 'other' type in certificate aux info to a STACK_OF
7123 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
7124 the required ASN1 format: arbitrary types determined by an OID.
7127 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
7128 argument to 'req'. This is not because the function is newer or
7129 better than others it just uses the work 'NEW' in the certificate
7130 request header lines. Some software needs this.
7133 *) Reorganise password command line arguments: now passwords can be
7134 obtained from various sources. Delete the PEM_cb function and make
7135 it the default behaviour: i.e. if the callback is NULL and the
7136 usrdata argument is not NULL interpret it as a null terminated pass
7137 phrase. If usrdata and the callback are NULL then the pass phrase
7138 is prompted for as usual.
7141 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
7142 the support is automatically enabled. The resulting binaries will
7143 autodetect the card and use it if present.
7144 [Ben Laurie and Compaq Inc.]
7146 *) Work around for Netscape hang bug. This sends certificate request
7147 and server done in one record. Since this is perfectly legal in the
7148 SSL/TLS protocol it isn't a "bug" option and is on by default. See
7149 the bugs/SSLv3 entry for more info.
7152 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
7155 *) Add -rand argument to smime and pkcs12 applications and read/write
7159 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
7162 *) Add command line password options to the remaining applications.
7165 *) Bug fix for BN_div_recp() for numerators with an even number of
7169 *) More tests in bntest.c, and changed test_bn output.
7172 *) ./config recognizes MacOS X now.
7175 *) Bug fix for BN_div() when the first words of num and divsor are
7176 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
7179 *) Add support for various broken PKCS#8 formats, and command line
7180 options to produce them.
7183 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
7184 get temporary BIGNUMs from a BN_CTX.
7187 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
7191 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
7192 include a #define from the old name to the new. The original intent
7193 was that statically linked binaries could for example just call
7194 SSLeay_add_all_ciphers() to just add ciphers to the table and not
7195 link with digests. This never worked becayse SSLeay_add_all_digests()
7196 and SSLeay_add_all_ciphers() were in the same source file so calling
7197 one would link with the other. They are now in separate source files.
7200 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
7203 *) Use a less unusual form of the Miller-Rabin primality test (it used
7204 a binary algorithm for exponentiation integrated into the Miller-Rabin
7205 loop, our standard modexp algorithms are faster).
7208 *) Support for the EBCDIC character set completed.
7209 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
7211 *) Source code cleanups: use const where appropriate, eliminate casts,
7212 use void * instead of char * in lhash.
7215 *) Bugfix: ssl3_send_server_key_exchange was not restartable
7216 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
7217 this the server could overwrite ephemeral keys that the client
7221 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
7222 using 50 iterations of the Rabin-Miller test.
7224 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
7225 iterations of the Rabin-Miller test as required by the appendix
7226 to FIPS PUB 186[-1]) instead of DSA_is_prime.
7227 As BN_is_prime_fasttest includes trial division, DSA parameter
7228 generation becomes much faster.
7230 This implies a change for the callback functions in DSA_is_prime
7231 and DSA_generate_parameters: The callback function is called once
7232 for each positive witness in the Rabin-Miller test, not just
7233 occasionally in the inner loop; and the parameters to the
7234 callback function now provide an iteration count for the outer
7235 loop rather than for the current invocation of the inner loop.
7236 DSA_generate_parameters additionally can call the callback
7237 function with an 'iteration count' of -1, meaning that a
7238 candidate has passed the trial division test (when q is generated
7239 from an application-provided seed, trial division is skipped).
7242 *) New function BN_is_prime_fasttest that optionally does trial
7243 division before starting the Rabin-Miller test and has
7244 an additional BN_CTX * argument (whereas BN_is_prime always
7245 has to allocate at least one BN_CTX).
7246 'callback(1, -1, cb_arg)' is called when a number has passed the
7247 trial division stage.
7250 *) Fix for bug in CRL encoding. The validity dates weren't being handled
7254 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
7257 *) New function BN_pseudo_rand().
7260 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
7261 bignum version of BN_from_montgomery() with the working code from
7262 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
7266 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
7267 made it impossible to use the same SSL_SESSION data structure in
7268 SSL2 clients in multiple threads.
7271 *) The return value of RAND_load_file() no longer counts bytes obtained
7272 by stat(). RAND_load_file(..., -1) is new and uses the complete file
7273 to seed the PRNG (previously an explicit byte count was required).
7274 [Ulf Möller, Bodo Möller]
7276 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
7277 used (char *) instead of (void *) and had casts all over the place.
7280 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
7283 *) Retain source code compatibility for BN_prime_checks macro:
7284 BN_is_prime(..., BN_prime_checks, ...) now uses
7285 BN_prime_checks_for_size to determine the appropriate number of
7286 Rabin-Miller iterations.
7289 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
7290 DH_CHECK_P_NOT_SAFE_PRIME.
7291 (Check if this is true? OpenPGP calls them "strong".)
7294 *) Merge the functionality of "dh" and "gendh" programs into a new program
7295 "dhparam". The old programs are retained for now but will handle DH keys
7296 (instead of parameters) in future.
7299 *) Make the ciphers, s_server and s_client programs check the return values
7300 when a new cipher list is set.
7303 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
7304 ciphers. Before when the 56bit ciphers were enabled the sorting was
7307 The syntax for the cipher sorting has been extended to support sorting by
7308 cipher-strength (using the strength_bits hard coded in the tables).
7309 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
7311 Fix a bug in the cipher-command parser: when supplying a cipher command
7312 string with an "undefined" symbol (neither command nor alphanumeric
7313 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
7314 an error is flagged.
7316 Due to the strength-sorting extension, the code of the
7317 ssl_create_cipher_list() function was completely rearranged. I hope that
7318 the readability was also increased :-)
7319 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
7321 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
7322 for the first serial number and places 2 in the serial number file. This
7323 avoids problems when the root CA is created with serial number zero and
7324 the first user certificate has the same issuer name and serial number
7328 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
7329 the new code. Add documentation for this stuff.
7332 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
7333 X509_*() to X509at_*() on the grounds that they don't handle X509
7334 structures and behave in an analagous way to the X509v3 functions:
7335 they shouldn't be called directly but wrapper functions should be used
7338 So we also now have some wrapper functions that call the X509at functions
7339 when passed certificate requests. (TO DO: similar things can be done with
7340 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
7341 things. Some of these need some d2i or i2d and print functionality
7342 because they handle more complex structures.)
7345 *) Add missing #ifndefs that caused missing symbols when building libssl
7346 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
7347 NO_RSA in ssl/s2*.c.
7348 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
7350 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
7351 has a return value which indicates the quality of the random data
7352 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
7353 error queue. New function RAND_pseudo_bytes() generates output that is
7354 guaranteed to be unique but not unpredictable. RAND_add is like
7355 RAND_seed, but takes an extra argument for an entropy estimate
7356 (RAND_seed always assumes full entropy).
7359 *) Do more iterations of Rabin-Miller probable prime test (specifically,
7360 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
7361 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
7362 in crypto/bn/bn_prime.c for the complete table). This guarantees a
7363 false-positive rate of at most 2^-80 for random input.
7366 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
7369 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
7370 in the 0.9.5 release), this returns the chain
7371 from an X509_CTX structure with a dup of the stack and all
7372 the X509 reference counts upped: so the stack will exist
7373 after X509_CTX_cleanup() has been called. Modify pkcs12.c
7376 Also make SSL_SESSION_print() print out the verify return
7380 *) Add manpage for the pkcs12 command. Also change the default
7381 behaviour so MAC iteration counts are used unless the new
7382 -nomaciter option is used. This improves file security and
7383 only older versions of MSIE (4.0 for example) need it.
7386 *) Honor the no-xxx Configure options when creating .DEF files.
7389 *) Add PKCS#10 attributes to field table: challengePassword,
7390 unstructuredName and unstructuredAddress. These are taken from
7391 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
7392 international characters are used.
7394 More changes to X509_ATTRIBUTE code: allow the setting of types
7395 based on strings. Remove the 'loc' parameter when adding
7396 attributes because these will be a SET OF encoding which is sorted
7400 *) Initial changes to the 'req' utility to allow request generation
7401 automation. This will allow an application to just generate a template
7402 file containing all the field values and have req construct the
7405 Initial support for X509_ATTRIBUTE handling. Stacks of these are
7406 used all over the place including certificate requests and PKCS#7
7407 structures. They are currently handled manually where necessary with
7408 some primitive wrappers for PKCS#7. The new functions behave in a
7409 manner analogous to the X509 extension functions: they allow
7410 attributes to be looked up by NID and added.
7412 Later something similar to the X509V3 code would be desirable to
7413 automatically handle the encoding, decoding and printing of the
7414 more complex types. The string types like challengePassword can
7415 be handled by the string table functions.
7417 Also modified the multi byte string table handling. Now there is
7418 a 'global mask' which masks out certain types. The table itself
7419 can use the flag STABLE_NO_MASK to ignore the mask setting: this
7420 is useful when for example there is only one permissible type
7421 (as in countryName) and using the mask might result in no valid
7425 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
7426 SSL_get_peer_finished to allow applications to obtain the latest
7427 Finished messages sent to the peer or expected from the peer,
7428 respectively. (SSL_get_peer_finished is usually the Finished message
7429 actually received from the peer, otherwise the protocol will be aborted.)
7431 As the Finished message are message digests of the complete handshake
7432 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
7433 be used for external authentication procedures when the authentication
7434 provided by SSL/TLS is not desired or is not enough.
7437 *) Enhanced support for Alpha Linux is added. Now ./config checks if
7438 the host supports BWX extension and if Compaq C is present on the
7439 $PATH. Just exploiting of the BWX extension results in 20-30%
7440 performance kick for some algorithms, e.g. DES and RC4 to mention
7441 a couple. Compaq C in turn generates ~20% faster code for MD5 and
7445 *) Add support for MS "fast SGC". This is arguably a violation of the
7446 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
7447 weak crypto and after checking the certificate is SGC a second one
7448 with strong crypto. MS SGC stops the first handshake after receiving
7449 the server certificate message and sends a second client hello. Since
7450 a server will typically do all the time consuming operations before
7451 expecting any further messages from the client (server key exchange
7452 is the most expensive) there is little difference between the two.
7454 To get OpenSSL to support MS SGC we have to permit a second client
7455 hello message after we have sent server done. In addition we have to
7456 reset the MAC if we do get this second client hello.
7459 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
7460 if a DER encoded private key is RSA or DSA traditional format. Changed
7461 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
7462 format DER encoded private key. Newer code should use PKCS#8 format which
7463 has the key type encoded in the ASN1 structure. Added DER private key
7464 support to pkcs8 application.
7467 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
7468 ciphersuites has been selected (as required by the SSL 3/TLS 1
7469 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
7470 is set, we interpret this as a request to violate the specification
7471 (the worst that can happen is a handshake failure, and 'correct'
7472 behaviour would result in a handshake failure anyway).
7475 *) In SSL_CTX_add_session, take into account that there might be multiple
7476 SSL_SESSION structures with the same session ID (e.g. when two threads
7477 concurrently obtain them from an external cache).
7478 The internal cache can handle only one SSL_SESSION with a given ID,
7479 so if there's a conflict, we now throw out the old one to achieve
7483 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
7484 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
7485 some routines that use cipher OIDs: some ciphers do not have OIDs
7486 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
7490 *) Simplify the trust setting structure and code. Now we just have
7491 two sequences of OIDs for trusted and rejected settings. These will
7492 typically have values the same as the extended key usage extension
7493 and any application specific purposes.
7495 The trust checking code now has a default behaviour: it will just
7496 check for an object with the same NID as the passed id. Functions can
7497 be provided to override either the default behaviour or the behaviour
7498 for a given id. SSL client, server and email already have functions
7499 in place for compatibility: they check the NID and also return "trusted"
7500 if the certificate is self signed.
7503 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
7504 traditional format into an EVP_PKEY structure.
7507 *) Add a password callback function PEM_cb() which either prompts for
7508 a password if usr_data is NULL or otherwise assumes it is a null
7509 terminated password. Allow passwords to be passed on command line
7510 environment or config files in a few more utilities.
7513 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
7514 keys. Add some short names for PKCS#8 PBE algorithms and allow them
7515 to be specified on the command line for the pkcs8 and pkcs12 utilities.
7516 Update documentation.
7519 *) Support for ASN1 "NULL" type. This could be handled before by using
7520 ASN1_TYPE but there wasn't any function that would try to read a NULL
7521 and produce an error if it couldn't. For compatibility we also have
7522 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
7523 don't allocate anything because they don't need to.
7526 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
7528 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
7530 *) Rebuild of the memory allocation routines used by OpenSSL code and
7531 possibly others as well. The purpose is to make an interface that
7532 provide hooks so anyone can build a separate set of allocation and
7533 deallocation routines to be used by OpenSSL, for example memory
7534 pool implementations, or something else, which was previously hard
7535 since Malloc(), Realloc() and Free() were defined as macros having
7536 the values malloc, realloc and free, respectively (except for Win32
7537 compilations). The same is provided for memory debugging code.
7538 OpenSSL already comes with functionality to find memory leaks, but
7539 this gives people a chance to debug other memory problems.
7541 With these changes, a new set of functions and macros have appeared:
7543 CRYPTO_set_mem_debug_functions() [F]
7544 CRYPTO_get_mem_debug_functions() [F]
7545 CRYPTO_dbg_set_options() [F]
7546 CRYPTO_dbg_get_options() [F]
7547 CRYPTO_malloc_debug_init() [M]
7549 The memory debug functions are NULL by default, unless the library
7550 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
7551 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
7552 gives the standard debugging functions that come with OpenSSL) or
7553 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
7554 provided by the library user) must be used. When the standard
7555 debugging functions are used, CRYPTO_dbg_set_options can be used to
7556 request additional information:
7557 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
7558 the CRYPTO_MDEBUG_xxx macro when compiling the library.
7560 Also, things like CRYPTO_set_mem_functions will always give the
7561 expected result (the new set of functions is used for allocation
7562 and deallocation) at all times, regardless of platform and compiler
7565 To finish it up, some functions that were never use in any other
7566 way than through macros have a new API and new semantic:
7569 CRYPTO_dbg_realloc()
7572 All macros of value have retained their old syntax.
7573 [Richard Levitte and Bodo Moeller]
7575 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
7576 ordering of SMIMECapabilities wasn't in "strength order" and there
7577 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
7581 *) Some ASN1 types with illegal zero length encoding (INTEGER,
7582 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
7583 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
7585 *) Merge in my S/MIME library for OpenSSL. This provides a simple
7586 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
7587 functionality to handle multipart/signed properly) and a utility
7588 called 'smime' to call all this stuff. This is based on code I
7589 originally wrote for Celo who have kindly allowed it to be
7590 included in OpenSSL.
7593 *) Add variants des_set_key_checked and des_set_key_unchecked of
7594 des_set_key (aka des_key_sched). Global variable des_check_key
7595 decides which of these is called by des_set_key; this way
7596 des_check_key behaves as it always did, but applications and
7597 the library itself, which was buggy for des_check_key == 1,
7598 have a cleaner way to pick the version they need.
7601 *) New function PKCS12_newpass() which changes the password of a
7605 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
7606 dynamic mix. In both cases the ids can be used as an index into the
7607 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
7608 functions so they accept a list of the field values and the
7609 application doesn't need to directly manipulate the X509_TRUST
7613 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
7617 *) Modify the way the V3 extension code looks up extensions. This now
7618 works in a similar way to the object code: we have some "standard"
7619 extensions in a static table which is searched with OBJ_bsearch()
7620 and the application can add dynamic ones if needed. The file
7621 crypto/x509v3/ext_dat.h now has the info: this file needs to be
7622 updated whenever a new extension is added to the core code and kept
7623 in ext_nid order. There is a simple program 'tabtest.c' which checks
7624 this. New extensions are not added too often so this file can readily
7625 be maintained manually.
7627 There are two big advantages in doing things this way. The extensions
7628 can be looked up immediately and no longer need to be "added" using
7629 X509V3_add_standard_extensions(): this function now does nothing.
7630 [Side note: I get *lots* of email saying the extension code doesn't
7631 work because people forget to call this function]
7632 Also no dynamic allocation is done unless new extensions are added:
7633 so if we don't add custom extensions there is no need to call
7634 X509V3_EXT_cleanup().
7637 *) Modify enc utility's salting as follows: make salting the default. Add a
7638 magic header, so unsalted files fail gracefully instead of just decrypting
7639 to garbage. This is because not salting is a big security hole, so people
7640 should be discouraged from doing it.
7643 *) Fixes and enhancements to the 'x509' utility. It allowed a message
7644 digest to be passed on the command line but it only used this
7645 parameter when signing a certificate. Modified so all relevant
7646 operations are affected by the digest parameter including the
7647 -fingerprint and -x509toreq options. Also -x509toreq choked if a
7648 DSA key was used because it didn't fix the digest.
7651 *) Initial certificate chain verify code. Currently tests the untrusted
7652 certificates for consistency with the verify purpose (which is set
7653 when the X509_STORE_CTX structure is set up) and checks the pathlength.
7655 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
7656 this is because it will reject chains with invalid extensions whereas
7657 every previous version of OpenSSL and SSLeay made no checks at all.
7659 Trust code: checks the root CA for the relevant trust settings. Trust
7660 settings have an initial value consistent with the verify purpose: e.g.
7661 if the verify purpose is for SSL client use it expects the CA to be
7662 trusted for SSL client use. However the default value can be changed to
7663 permit custom trust settings: one example of this would be to only trust
7664 certificates from a specific "secure" set of CAs.
7666 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
7667 which should be used for version portability: especially since the
7668 verify structure is likely to change more often now.
7670 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
7671 to set them. If not set then assume SSL clients will verify SSL servers
7674 Two new options to the verify program: -untrusted allows a set of
7675 untrusted certificates to be passed in and -purpose which sets the
7676 intended purpose of the certificate. If a purpose is set then the
7677 new chain verify code is used to check extension consistency.
7680 *) Support for the authority information access extension.
7683 *) Modify RSA and DSA PEM read routines to transparently handle
7684 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
7685 public keys in a format compatible with certificate
7686 SubjectPublicKeyInfo structures. Unfortunately there were already
7687 functions called *_PublicKey_* which used various odd formats so
7688 these are retained for compatibility: however the DSA variants were
7689 never in a public release so they have been deleted. Changed dsa/rsa
7690 utilities to handle the new format: note no releases ever handled public
7691 keys so we should be OK.
7693 The primary motivation for this change is to avoid the same fiasco
7694 that dogs private keys: there are several incompatible private key
7695 formats some of which are standard and some OpenSSL specific and
7696 require various evil hacks to allow partial transparent handling and
7697 even then it doesn't work with DER formats. Given the option anything
7698 other than PKCS#8 should be dumped: but the other formats have to
7699 stay in the name of compatibility.
7701 With public keys and the benefit of hindsight one standard format
7702 is used which works with EVP_PKEY, RSA or DSA structures: though
7703 it clearly returns an error if you try to read the wrong kind of key.
7705 Added a -pubkey option to the 'x509' utility to output the public key.
7706 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
7707 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
7708 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
7709 that do the same as the EVP_PKEY_assign_*() except they up the
7710 reference count of the added key (they don't "swallow" the
7714 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
7715 CRLs would fail if the file contained no certificates or no CRLs:
7716 added a new function to read in both types and return the number
7717 read: this means that if none are read it will be an error. The
7718 DER versions of the certificate and CRL reader would always fail
7719 because it isn't possible to mix certificates and CRLs in DER format
7720 without choking one or the other routine. Changed this to just read
7721 a certificate: this is the best we can do. Also modified the code
7722 in apps/verify.c to take notice of return codes: it was previously
7723 attempting to read in certificates from NULL pointers and ignoring
7724 any errors: this is one reason why the cert and CRL reader seemed
7725 to work. It doesn't check return codes from the default certificate
7726 routines: these may well fail if the certificates aren't installed.
7729 *) Code to support otherName option in GeneralName.
7732 *) First update to verify code. Change the verify utility
7733 so it warns if it is passed a self signed certificate:
7734 for consistency with the normal behaviour. X509_verify
7735 has been modified to it will now verify a self signed
7736 certificate if *exactly* the same certificate appears
7737 in the store: it was previously impossible to trust a
7738 single self signed certificate. This means that:
7739 openssl verify ss.pem
7740 now gives a warning about a self signed certificate but
7741 openssl verify -CAfile ss.pem ss.pem
7745 *) For servers, store verify_result in SSL_SESSION data structure
7746 (and add it to external session representation).
7747 This is needed when client certificate verifications fails,
7748 but an application-provided verification callback (set by
7749 SSL_CTX_set_cert_verify_callback) allows accepting the session
7750 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
7751 but returns 1): When the session is reused, we have to set
7752 ssl->verify_result to the appropriate error code to avoid
7754 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
7756 *) Fix a bug in the new PKCS#7 code: it didn't consider the
7757 case in PKCS7_dataInit() where the signed PKCS7 structure
7758 didn't contain any existing data because it was being created.
7759 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
7761 *) Add a salt to the key derivation routines in enc.c. This
7762 forms the first 8 bytes of the encrypted file. Also add a
7763 -S option to allow a salt to be input on the command line.
7766 *) New function X509_cmp(). Oddly enough there wasn't a function
7767 to compare two certificates. We do this by working out the SHA1
7768 hash and comparing that. X509_cmp() will be needed by the trust
7772 *) SSL_get1_session() is like SSL_get_session(), but increments
7773 the reference count in the SSL_SESSION returned.
7774 [Geoff Thorpe <geoff@eu.c2.net>]
7776 *) Fix for 'req': it was adding a null to request attributes.
7777 Also change the X509_LOOKUP and X509_INFO code to handle
7778 certificate auxiliary information.
7781 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
7785 *) Add the possibility to add extra information to the memory leak
7786 detecting output, to form tracebacks, showing from where each
7787 allocation was originated: CRYPTO_push_info("constant string") adds
7788 the string plus current file name and line number to a per-thread
7789 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
7790 is like calling CYRPTO_pop_info() until the stack is empty.
7791 Also updated memory leak detection code to be multi-thread-safe.
7794 *) Add options -text and -noout to pkcs7 utility and delete the
7795 encryption options which never did anything. Update docs.
7798 *) Add options to some of the utilities to allow the pass phrase
7799 to be included on either the command line (not recommended on
7800 OSes like Unix) or read from the environment. Update the
7801 manpages and fix a few bugs.
7804 *) Add a few manpages for some of the openssl commands.
7807 *) Fix the -revoke option in ca. It was freeing up memory twice,
7808 leaking and not finding already revoked certificates.
7811 *) Extensive changes to support certificate auxiliary information.
7812 This involves the use of X509_CERT_AUX structure and X509_AUX
7813 functions. An X509_AUX function such as PEM_read_X509_AUX()
7814 can still read in a certificate file in the usual way but it
7815 will also read in any additional "auxiliary information". By
7816 doing things this way a fair degree of compatibility can be
7817 retained: existing certificates can have this information added
7818 using the new 'x509' options.
7820 Current auxiliary information includes an "alias" and some trust
7821 settings. The trust settings will ultimately be used in enhanced
7822 certificate chain verification routines: currently a certificate
7823 can only be trusted if it is self signed and then it is trusted
7827 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
7828 The problem was that one of the replacement routines had not been working
7829 since SSLeay releases. For now the offending routine has been replaced
7830 with non-optimised assembler. Even so, this now gives around 95%
7831 performance improvement for 1024 bit RSA signs.
7834 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
7835 handling. Most clients have the effective key size in bits equal to
7836 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
7837 A few however don't do this and instead use the size of the decrypted key
7838 to determine the RC2 key length and the AlgorithmIdentifier to determine
7839 the effective key length. In this case the effective key length can still
7840 be 40 bits but the key length can be 168 bits for example. This is fixed
7841 by manually forcing an RC2 key into the EVP_PKEY structure because the
7842 EVP code can't currently handle unusual RC2 key sizes: it always assumes
7843 the key length and effective key length are equal.
7846 *) Add a bunch of functions that should simplify the creation of
7847 X509_NAME structures. Now you should be able to do:
7848 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
7849 and have it automatically work out the correct field type and fill in
7850 the structures. The more adventurous can try:
7851 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
7852 and it will (hopefully) work out the correct multibyte encoding.
7855 *) Change the 'req' utility to use the new field handling and multibyte
7856 copy routines. Before the DN field creation was handled in an ad hoc
7857 way in req, ca, and x509 which was rather broken and didn't support
7858 BMPStrings or UTF8Strings. Since some software doesn't implement
7859 BMPStrings or UTF8Strings yet, they can be enabled using the config file
7860 using the dirstring_type option. See the new comment in the default
7861 openssl.cnf for more info.
7864 *) Make crypto/rand/md_rand.c more robust:
7865 - Assure unique random numbers after fork().
7866 - Make sure that concurrent threads access the global counter and
7867 md serializably so that we never lose entropy in them
7868 or use exactly the same state in multiple threads.
7869 Access to the large state is not always serializable because
7870 the additional locking could be a performance killer, and
7871 md should be large enough anyway.
7874 *) New file apps/app_rand.c with commonly needed functionality
7875 for handling the random seed file.
7877 Use the random seed file in some applications that previously did not:
7879 dsaparam -genkey (which also ignored its '-rand' option),
7882 x509 (when signing).
7883 Except on systems with /dev/urandom, it is crucial to have a random
7884 seed file at least for key creation, DSA signing, and for DH exchanges;
7885 for RSA signatures we could do without one.
7887 gendh and gendsa (unlike genrsa) used to read only the first byte
7888 of each file listed in the '-rand' option. The function as previously
7889 found in genrsa is now in app_rand.c and is used by all programs
7890 that support '-rand'.
7893 *) In RAND_write_file, use mode 0600 for creating files;
7894 don't just chmod when it may be too late.
7897 *) Report an error from X509_STORE_load_locations
7898 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
7901 *) New function ASN1_mbstring_copy() this copies a string in either
7902 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
7903 into an ASN1_STRING type. A mask of permissible types is passed
7904 and it chooses the "minimal" type to use or an error if not type
7908 *) Add function equivalents to the various macros in asn1.h. The old
7909 macros are retained with an M_ prefix. Code inside the library can
7910 use the M_ macros. External code (including the openssl utility)
7911 should *NOT* in order to be "shared library friendly".
7914 *) Add various functions that can check a certificate's extensions
7915 to see if it usable for various purposes such as SSL client,
7916 server or S/MIME and CAs of these types. This is currently
7917 VERY EXPERIMENTAL but will ultimately be used for certificate chain
7918 verification. Also added a -purpose flag to x509 utility to
7919 print out all the purposes.
7922 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
7926 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
7927 for, obtain and decode and extension and obtain its critical flag.
7928 This allows all the necessary extension code to be handled in a
7929 single function call.
7932 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
7933 platforms. See crypto/rc4/rc4_enc.c for further details.
7936 *) New -noout option to asn1parse. This causes no output to be produced
7937 its main use is when combined with -strparse and -out to extract data
7938 from a file (which may not be in ASN.1 format).
7941 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
7942 when producing the local key id.
7943 [Richard Levitte <levitte@stacken.kth.se>]
7945 *) New option -dhparam in s_server. This allows a DH parameter file to be
7946 stated explicitly. If it is not stated then it tries the first server
7947 certificate file. The previous behaviour hard coded the filename
7951 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
7952 a public key to be input or output. For example:
7953 openssl rsa -in key.pem -pubout -out pubkey.pem
7954 Also added necessary DSA public key functions to handle this.
7957 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
7958 in the message. This was handled by allowing
7959 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
7960 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
7962 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
7963 to the end of the strings whereas this didn't. This would cause problems
7964 if strings read with d2i_ASN1_bytes() were later modified.
7965 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
7967 *) Fix for base64 decode bug. When a base64 bio reads only one line of
7968 data and it contains EOF it will end up returning an error. This is
7969 caused by input 46 bytes long. The cause is due to the way base64
7970 BIOs find the start of base64 encoded data. They do this by trying a
7971 trial decode on each line until they find one that works. When they
7972 do a flag is set and it starts again knowing it can pass all the
7973 data directly through the decoder. Unfortunately it doesn't reset
7974 the context it uses. This means that if EOF is reached an attempt
7975 is made to pass two EOFs through the context and this causes the
7976 resulting error. This can also cause other problems as well. As is
7977 usual with these problems it takes *ages* to find and the fix is
7978 trivial: move one line.
7979 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
7981 *) Ugly workaround to get s_client and s_server working under Windows. The
7982 old code wouldn't work because it needed to select() on sockets and the
7983 tty (for keypresses and to see if data could be written). Win32 only
7984 supports select() on sockets so we select() with a 1s timeout on the
7985 sockets and then see if any characters are waiting to be read, if none
7986 are present then we retry, we also assume we can always write data to
7987 the tty. This isn't nice because the code then blocks until we've
7988 received a complete line of data and it is effectively polling the
7989 keyboard at 1s intervals: however it's quite a bit better than not
7990 working at all :-) A dedicated Windows application might handle this
7991 with an event loop for example.
7994 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
7995 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
7996 will be called when RSA_sign() and RSA_verify() are used. This is useful
7997 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
7998 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
7999 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
8000 This necessitated the support of an extra signature type NID_md5_sha1
8001 for SSL signatures and modifications to the SSL library to use it instead
8002 of calling RSA_public_decrypt() and RSA_private_encrypt().
8005 *) Add new -verify -CAfile and -CApath options to the crl program, these
8006 will lookup a CRL issuers certificate and verify the signature in a
8007 similar way to the verify program. Tidy up the crl program so it
8008 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
8009 less strict. It will now permit CRL extensions even if it is not
8010 a V2 CRL: this will allow it to tolerate some broken CRLs.
8013 *) Initialize all non-automatic variables each time one of the openssl
8014 sub-programs is started (this is necessary as they may be started
8015 multiple times from the "OpenSSL>" prompt).
8016 [Lennart Bang, Bodo Moeller]
8018 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
8019 removing all other RSA functionality (this is what NO_RSA does). This
8020 is so (for example) those in the US can disable those operations covered
8021 by the RSA patent while allowing storage and parsing of RSA keys and RSA
8025 *) Non-copying interface to BIO pairs.
8026 (still largely untested)
8029 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
8030 ASCII string. This was handled independently in various places before.
8033 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
8034 UTF8 strings a character at a time.
8037 *) Use client_version from client hello to select the protocol
8038 (s23_srvr.c) and for RSA client key exchange verification
8039 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
8042 *) Add various utility functions to handle SPKACs, these were previously
8043 handled by poking round in the structure internals. Added new function
8044 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
8045 print, verify and generate SPKACs. Based on an original idea from
8046 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
8049 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
8052 *) Allow the config file extension section to be overwritten on the
8053 command line. Based on an original idea from Massimiliano Pala
8054 <madwolf@comune.modena.it>. The new option is called -extensions
8055 and can be applied to ca, req and x509. Also -reqexts to override
8056 the request extensions in req and -crlexts to override the crl extensions
8060 *) Add new feature to the SPKAC handling in ca. Now you can include
8061 the same field multiple times by preceding it by "XXXX." for example:
8064 this is the same syntax as used in the req config file.
8067 *) Allow certificate extensions to be added to certificate requests. These
8068 are specified in a 'req_extensions' option of the req section of the
8069 config file. They can be printed out with the -text option to req but
8070 are otherwise ignored at present.
8073 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
8074 data read consists of only the final block it would not decrypted because
8075 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
8076 A misplaced 'break' also meant the decrypted final block might not be
8077 copied until the next read.
8080 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
8081 a few extra parameters to the DH structure: these will be useful if
8082 for example we want the value of 'q' or implement X9.42 DH.
8085 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
8086 provides hooks that allow the default DSA functions or functions on a
8087 "per key" basis to be replaced. This allows hardware acceleration and
8088 hardware key storage to be handled without major modification to the
8089 library. Also added low level modexp hooks and CRYPTO_EX structure and
8090 associated functions.
8093 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
8094 as "read only": it can't be written to and the buffer it points to will
8095 not be freed. Reading from a read only BIO is much more efficient than
8096 a normal memory BIO. This was added because there are several times when
8097 an area of memory needs to be read from a BIO. The previous method was
8098 to create a memory BIO and write the data to it, this results in two
8099 copies of the data and an O(n^2) reading algorithm. There is a new
8100 function BIO_new_mem_buf() which creates a read only memory BIO from
8101 an area of memory. Also modified the PKCS#7 routines to use read only
8105 *) Bugfix: ssl23_get_client_hello did not work properly when called in
8106 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
8107 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
8108 but a retry condition occured while trying to read the rest.
8111 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
8112 NID_pkcs7_encrypted by default: this was wrong since this should almost
8113 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
8114 the encrypted data type: this is a more sensible place to put it and it
8115 allows the PKCS#12 code to be tidied up that duplicated this
8119 *) Changed obj_dat.pl script so it takes its input and output files on
8120 the command line. This should avoid shell escape redirection problems
8124 *) Initial support for certificate extension requests, these are included
8125 in things like Xenroll certificate requests. Included functions to allow
8126 extensions to be obtained and added.
8129 *) -crlf option to s_client and s_server for sending newlines as
8130 CRLF (as required by many protocols).
8133 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
8135 *) Install libRSAglue.a when OpenSSL is built with RSAref.
8136 [Ralf S. Engelschall]
8138 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
8139 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
8141 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
8145 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
8146 DH parameters/keys (q is lost during that conversion, but the resulting
8147 DH parameters contain its length).
8149 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
8150 much faster than DH_generate_parameters (which creates parameters
8151 where p = 2*q + 1), and also the smaller q makes DH computations
8152 much more efficient (160-bit exponentiation instead of 1024-bit
8153 exponentiation); so this provides a convenient way to support DHE
8154 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
8155 utter importance to use
8156 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8158 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8159 when such DH parameters are used, because otherwise small subgroup
8160 attacks may become possible!
8163 *) Avoid memory leak in i2d_DHparams.
8166 *) Allow the -k option to be used more than once in the enc program:
8167 this allows the same encrypted message to be read by multiple recipients.
8170 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
8171 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
8172 it will always use the numerical form of the OID, even if it has a short
8176 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
8177 method only got called if p,q,dmp1,dmq1,iqmp components were present,
8178 otherwise bn_mod_exp was called. In the case of hardware keys for example
8179 no private key components need be present and it might store extra data
8180 in the RSA structure, which cannot be accessed from bn_mod_exp.
8181 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
8182 private key operations.
8185 *) Added support for SPARC Linux.
8188 *) pem_password_cb function type incompatibly changed from
8189 typedef int pem_password_cb(char *buf, int size, int rwflag);
8191 ....(char *buf, int size, int rwflag, void *userdata);
8192 so that applications can pass data to their callbacks:
8193 The PEM[_ASN1]_{read,write}... functions and macros now take an
8194 additional void * argument, which is just handed through whenever
8195 the password callback is called.
8196 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
8198 New function SSL_CTX_set_default_passwd_cb_userdata.
8200 Compatibility note: As many C implementations push function arguments
8201 onto the stack in reverse order, the new library version is likely to
8202 interoperate with programs that have been compiled with the old
8203 pem_password_cb definition (PEM_whatever takes some data that
8204 happens to be on the stack as its last argument, and the callback
8205 just ignores this garbage); but there is no guarantee whatsoever that
8208 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
8209 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
8210 problems not only on Windows, but also on some Unix platforms.
8211 To avoid problematic command lines, these definitions are now in an
8212 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
8213 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
8216 *) MIPS III/IV assembler module is reimplemented.
8219 *) More DES library cleanups: remove references to srand/rand and
8220 delete an unused file.
8223 *) Add support for the the free Netwide assembler (NASM) under Win32,
8224 since not many people have MASM (ml) and it can be hard to obtain.
8225 This is currently experimental but it seems to work OK and pass all
8226 the tests. Check out INSTALL.W32 for info.
8229 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
8230 without temporary keys kept an extra copy of the server key,
8231 and connections with temporary keys did not free everything in case
8235 *) New function RSA_check_key and new openssl rsa option -check
8236 for verifying the consistency of RSA keys.
8237 [Ulf Moeller, Bodo Moeller]
8239 *) Various changes to make Win32 compile work:
8240 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
8241 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
8242 comparison" warnings.
8243 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
8246 *) Add a debugging option to PKCS#5 v2 key generation function: when
8247 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
8248 derived keys are printed to stderr.
8251 *) Copy the flags in ASN1_STRING_dup().
8252 [Roman E. Pavlov <pre@mo.msk.ru>]
8254 *) The x509 application mishandled signing requests containing DSA
8255 keys when the signing key was also DSA and the parameters didn't match.
8257 It was supposed to omit the parameters when they matched the signing key:
8258 the verifying software was then supposed to automatically use the CA's
8259 parameters if they were absent from the end user certificate.
8261 Omitting parameters is no longer recommended. The test was also
8262 the wrong way round! This was probably due to unusual behaviour in
8263 EVP_cmp_parameters() which returns 1 if the parameters match.
8264 This meant that parameters were omitted when they *didn't* match and
8265 the certificate was useless. Certificates signed with 'ca' didn't have
8267 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
8269 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
8270 The interface is as follows:
8271 Applications can use
8272 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
8273 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
8274 "off" is now the default.
8275 The library internally uses
8276 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
8277 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
8278 to disable memory-checking temporarily.
8280 Some inconsistent states that previously were possible (and were
8281 even the default) are now avoided.
8283 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
8284 with each memory chunk allocated; this is occasionally more helpful
8285 than just having a counter.
8287 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
8289 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
8293 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
8294 which largely parallels "options", but is for changing API behaviour,
8295 whereas "options" are about protocol behaviour.
8296 Initial "mode" flags are:
8298 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
8299 a single record has been written.
8300 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
8301 retries use the same buffer location.
8302 (But all of the contents must be
8306 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
8309 *) Fix problems with no-hmac etc.
8310 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
8312 *) New functions RSA_get_default_method(), RSA_set_method() and
8313 RSA_get_method(). These allows replacement of RSA_METHODs without having
8314 to mess around with the internals of an RSA structure.
8317 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
8318 Also really enable memory leak checks in openssl.c and in some
8320 [Chad C. Mulligan, Bodo Moeller]
8322 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
8323 up the length of negative integers. This has now been simplified to just
8324 store the length when it is first determined and use it later, rather
8325 than trying to keep track of where data is copied and updating it to
8327 [Steve Henson, reported by Brien Wheeler
8328 <bwheeler@authentica-security.com>]
8330 *) Add a new function PKCS7_signatureVerify. This allows the verification
8331 of a PKCS#7 signature but with the signing certificate passed to the
8332 function itself. This contrasts with PKCS7_dataVerify which assumes the
8333 certificate is present in the PKCS#7 structure. This isn't always the
8334 case: certificates can be omitted from a PKCS#7 structure and be
8335 distributed by "out of band" means (such as a certificate database).
8338 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
8339 function prototypes in pem.h, also change util/mkdef.pl to add the
8340 necessary function names.
8343 *) mk1mf.pl (used by Windows builds) did not properly read the
8344 options set by Configure in the top level Makefile, and Configure
8345 was not even able to write more than one option correctly.
8346 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
8349 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
8350 file to be loaded from a BIO or FILE pointer. The BIO version will
8351 for example allow memory BIOs to contain config info.
8354 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
8355 Whoever hopes to achieve shared-library compatibility across versions
8356 must use this, not the compile-time macro.
8357 (Exercise 0.9.4: Which is the minimum library version required by
8359 Note: All this applies only to multi-threaded programs, others don't
8363 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
8364 through a BIO pair triggered the default case, i.e.
8365 SSLerr(...,SSL_R_UNKNOWN_STATE).
8368 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
8369 can use the SSL library even if none of the specific BIOs is
8373 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
8374 for the encoded length.
8375 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
8377 *) Add initial documentation of the X509V3 functions.
8380 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
8381 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
8382 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
8383 secure PKCS#8 private key format with a high iteration count.
8386 *) Fix determination of Perl interpreter: A perl or perl5
8387 _directory_ in $PATH was also accepted as the interpreter.
8388 [Ralf S. Engelschall]
8390 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
8391 wrong with it but it was very old and did things like calling
8392 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
8396 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
8397 to use the new extension code.
8400 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
8401 with macros. This should make it easier to change their form, add extra
8402 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
8406 *) Add to configuration table a new entry that can specify an alternative
8407 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
8408 according to Mark Crispin <MRC@Panda.COM>.
8412 *) DES CBC did not update the IV. Weird.
8415 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
8416 Changing the behaviour of the former might break existing programs --
8417 where IV updating is needed, des_ncbc_encrypt can be used.
8420 *) When bntest is run from "make test" it drives bc to check its
8421 calculations, as well as internally checking them. If an internal check
8422 fails, it needs to cause bc to give a non-zero result or make test carries
8423 on without noticing the failure. Fixed.
8426 *) DES library cleanups.
8429 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
8430 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
8431 ciphers. NOTE: although the key derivation function has been verified
8432 against some published test vectors it has not been extensively tested
8433 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
8437 *) Instead of "mkdir -p", which is not fully portable, use new
8438 Perl script "util/mkdir-p.pl".
8441 *) Rewrite the way password based encryption (PBE) is handled. It used to
8442 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
8443 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
8444 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
8445 the 'parameter' field of the AlgorithmIdentifier is passed to the
8446 underlying key generation function so it must do its own ASN1 parsing.
8447 This has also changed the EVP_PBE_CipherInit() function which now has a
8448 'parameter' argument instead of literal salt and iteration count values
8449 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
8452 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
8453 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
8454 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
8455 KEY" because this clashed with PKCS#8 unencrypted string. Since this
8456 value was just used as a "magic string" and not used directly its
8457 value doesn't matter.
8460 *) Introduce some semblance of const correctness to BN. Shame C doesn't
8464 *) "linux-sparc64" configuration (ultrapenguin).
8465 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
8466 "linux-sparc" configuration.
8467 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
8469 *) config now generates no-xxx options for missing ciphers.
8472 *) Support the EBCDIC character set (work in progress).
8473 File ebcdic.c not yet included because it has a different license.
8474 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8476 *) Support BS2000/OSD-POSIX.
8477 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8479 *) Make callbacks for key generation use void * instead of char *.
8482 *) Make S/MIME samples compile (not yet tested).
8485 *) Additional typesafe stacks.
8488 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
8492 Changes between 0.9.3 and 0.9.3a [29 May 1999]
8494 *) New configuration variant "sco5-gcc".
8496 *) Updated some demos.
8497 [Sean O Riordain, Wade Scholine]
8499 *) Add missing BIO_free at exit of pkcs12 application.
8502 *) Fix memory leak in conf.c.
8505 *) Updates for Win32 to assembler version of MD5.
8508 *) Set #! path to perl in apps/der_chop to where we found it
8509 instead of using a fixed path.
8512 *) SHA library changes for irix64-mips4-cc.
8515 *) Improvements for VMS support.
8519 Changes between 0.9.2b and 0.9.3 [24 May 1999]
8521 *) Bignum library bug fix. IRIX 6 passes "make test" now!
8522 This also avoids the problems with SC4.2 and unpatched SC5.
8523 [Andy Polyakov <appro@fy.chalmers.se>]
8525 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
8526 These are required because of the typesafe stack would otherwise break
8527 existing code. If old code used a structure member which used to be STACK
8528 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
8529 sk_num or sk_value it would produce an error because the num, data members
8530 are not present in STACK_OF. Now it just produces a warning. sk_set
8531 replaces the old method of assigning a value to sk_value
8532 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
8533 that does this will no longer work (and should use sk_set instead) but
8534 this could be regarded as a "questionable" behaviour anyway.
8537 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
8538 correctly handle encrypted S/MIME data.
8541 *) Change type of various DES function arguments from des_cblock
8542 (which means, in function argument declarations, pointer to char)
8543 to des_cblock * (meaning pointer to array with 8 char elements),
8544 which allows the compiler to do more typechecking; it was like
8545 that back in SSLeay, but with lots of ugly casts.
8547 Introduce new type const_des_cblock.
8550 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
8551 problems: find RecipientInfo structure that matches recipient certificate
8552 and initialise the ASN1 structures properly based on passed cipher.
8555 *) Belatedly make the BN tests actually check the results.
8558 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
8559 to and from BNs: it was completely broken. New compilation option
8560 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
8561 key elements as negative integers.
8564 *) Reorganize and speed up MD5.
8565 [Andy Polyakov <appro@fy.chalmers.se>]
8568 [Richard Levitte <richard@levitte.org>]
8570 *) New option -out to asn1parse to allow the parsed structure to be
8571 output to a file. This is most useful when combined with the -strparse
8572 option to examine the output of things like OCTET STRINGS.
8575 *) Make SSL library a little more fool-proof by not requiring any longer
8576 that SSL_set_{accept,connect}_state be called before
8577 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
8578 in many applications because usually everything *appeared* to work as
8579 intended anyway -- now it really works as intended).
8582 *) Move openssl.cnf out of lib/.
8585 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
8586 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
8587 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
8588 [Ralf S. Engelschall]
8590 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
8591 handle PKCS#7 enveloped data properly.
8592 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
8594 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
8595 copying pointers. The cert_st handling is changed by this in
8596 various ways (and thus what used to be known as ctx->default_cert
8597 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
8598 any longer when s->cert does not give us what we need).
8599 ssl_cert_instantiate becomes obsolete by this change.
8600 As soon as we've got the new code right (possibly it already is?),
8601 we have solved a couple of bugs of the earlier code where s->cert
8602 was used as if it could not have been shared with other SSL structures.
8604 Note that using the SSL API in certain dirty ways now will result
8605 in different behaviour than observed with earlier library versions:
8606 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
8607 does not influence s as it used to.
8609 In order to clean up things more thoroughly, inside SSL_SESSION
8610 we don't use CERT any longer, but a new structure SESS_CERT
8611 that holds per-session data (if available); currently, this is
8612 the peer's certificate chain and, for clients, the server's certificate
8613 and temporary key. CERT holds only those values that can have
8614 meaningful defaults in an SSL_CTX.
8617 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
8618 from the internal representation. Various PKCS#7 fixes: remove some
8619 evil casts and set the enc_dig_alg field properly based on the signing
8623 *) Allow PKCS#12 password to be set from the command line or the
8624 environment. Let 'ca' get its config file name from the environment
8625 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
8629 *) Allow certificate policies extension to use an IA5STRING for the
8630 organization field. This is contrary to the PKIX definition but
8631 VeriSign uses it and IE5 only recognises this form. Document 'x509'
8635 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
8636 without disallowing inline assembler and the like for non-pedantic builds.
8639 *) Support Borland C++ builder.
8640 [Janez Jere <jj@void.si>, modified by Ulf Möller]
8645 *) SHA-1 cleanups and performance enhancements.
8646 [Andy Polyakov <appro@fy.chalmers.se>]
8648 *) Sparc v8plus assembler for the bignum library.
8649 [Andy Polyakov <appro@fy.chalmers.se>]
8651 *) Accept any -xxx and +xxx compiler options in Configure.
8654 *) Update HPUX configuration.
8657 *) Add missing sk_<type>_unshift() function to safestack.h
8658 [Ralf S. Engelschall]
8660 *) New function SSL_CTX_use_certificate_chain_file that sets the
8661 "extra_cert"s in addition to the certificate. (This makes sense
8662 only for "PEM" format files, as chains as a whole are not
8666 *) Support verify_depth from the SSL API.
8667 x509_vfy.c had what can be considered an off-by-one-error:
8668 Its depth (which was not part of the external interface)
8669 was actually counting the number of certificates in a chain;
8670 now it really counts the depth.
8673 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
8674 instead of X509err, which often resulted in confusing error
8675 messages since the error codes are not globally unique
8676 (e.g. an alleged error in ssl3_accept when a certificate
8677 didn't match the private key).
8679 *) New function SSL_CTX_set_session_id_context that allows to set a default
8680 value (so that you don't need SSL_set_session_id_context for each
8681 connection using the SSL_CTX).
8684 *) OAEP decoding bug fix.
8687 *) Support INSTALL_PREFIX for package builders, as proposed by
8691 *) New Configure options "threads" and "no-threads". For systems
8692 where the proper compiler options are known (currently Solaris
8693 and Linux), "threads" is the default.
8696 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
8699 *) Install various scripts to $(OPENSSLDIR)/misc, not to
8700 $(INSTALLTOP)/bin -- they shouldn't clutter directories
8701 such as /usr/local/bin.
8704 *) "make linux-shared" to build shared libraries.
8705 [Niels Poppe <niels@netbox.org>]
8707 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
8710 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
8711 extension adding in x509 utility.
8714 *) Remove NOPROTO sections and error code comments.
8717 *) Partial rewrite of the DEF file generator to now parse the ANSI
8721 *) New Configure options --prefix=DIR and --openssldir=DIR.
8724 *) Complete rewrite of the error code script(s). It is all now handled
8725 by one script at the top level which handles error code gathering,
8726 header rewriting and C source file generation. It should be much better
8727 than the old method: it now uses a modified version of Ulf's parser to
8728 read the ANSI prototypes in all header files (thus the old K&R definitions
8729 aren't needed for error creation any more) and do a better job of
8730 translating function codes into names. The old 'ASN1 error code imbedded
8731 in a comment' is no longer necessary and it doesn't use .err files which
8732 have now been deleted. Also the error code call doesn't have to appear all
8733 on one line (which resulted in some large lines...).
8736 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
8739 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
8740 0 (which usually indicates a closed connection), but continue reading.
8743 *) Fix some race conditions.
8746 *) Add support for CRL distribution points extension. Add Certificate
8747 Policies and CRL distribution points documentation.
8750 *) Move the autogenerated header file parts to crypto/opensslconf.h.
8753 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
8754 8 of keying material. Merlin has also confirmed interop with this fix
8755 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
8756 [Merlin Hughes <merlin@baltimore.ie>]
8758 *) Fix lots of warnings.
8759 [Richard Levitte <levitte@stacken.kth.se>]
8761 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
8762 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
8763 [Richard Levitte <levitte@stacken.kth.se>]
8765 *) Fix problems with sizeof(long) == 8.
8766 [Andy Polyakov <appro@fy.chalmers.se>]
8768 *) Change functions to ANSI C.
8771 *) Fix typos in error codes.
8772 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
8774 *) Remove defunct assembler files from Configure.
8777 *) SPARC v8 assembler BIGNUM implementation.
8778 [Andy Polyakov <appro@fy.chalmers.se>]
8780 *) Support for Certificate Policies extension: both print and set.
8781 Various additions to support the r2i method this uses.
8784 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
8785 return a const string when you are expecting an allocated buffer.
8788 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
8789 types DirectoryString and DisplayText.
8792 *) Add code to allow r2i extensions to access the configuration database,
8793 add an LHASH database driver and add several ctx helper functions.
8796 *) Fix an evil bug in bn_expand2() which caused various BN functions to
8797 fail when they extended the size of a BIGNUM.
8800 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
8801 support typesafe stack.
8804 *) Fix typo in SSL_[gs]et_options().
8805 [Nils Frostberg <nils@medcom.se>]
8807 *) Delete various functions and files that belonged to the (now obsolete)
8808 old X509V3 handling code.
8811 *) New Configure option "rsaref".
8814 *) Don't auto-generate pem.h.
8817 *) Introduce type-safe ASN.1 SETs.
8820 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
8821 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
8823 *) Introduce type-safe STACKs. This will almost certainly break lots of code
8824 that links with OpenSSL (well at least cause lots of warnings), but fear
8825 not: the conversion is trivial, and it eliminates loads of evil casts. A
8826 few STACKed things have been converted already. Feel free to convert more.
8827 In the fullness of time, I'll do away with the STACK type altogether.
8830 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
8831 specified in <certfile> by updating the entry in the index.txt file.
8832 This way one no longer has to edit the index.txt file manually for
8833 revoking a certificate. The -revoke option does the gory details now.
8834 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
8836 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
8837 `-text' option at all and this way the `-noout -text' combination was
8838 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
8839 [Ralf S. Engelschall]
8841 *) Make sure a corresponding plain text error message exists for the
8842 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
8843 verify callback function determined that a certificate was revoked.
8844 [Ralf S. Engelschall]
8846 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
8847 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
8848 all available cipers including rc5, which was forgotten until now.
8849 In order to let the testing shell script know which algorithms
8850 are available, a new (up to now undocumented) command
8851 "openssl list-cipher-commands" is used.
8854 *) Bugfix: s_client occasionally would sleep in select() when
8855 it should have checked SSL_pending() first.
8858 *) New functions DSA_do_sign and DSA_do_verify to provide access to
8859 the raw DSA values prior to ASN.1 encoding.
8862 *) Tweaks to Configure
8863 [Niels Poppe <niels@netbox.org>]
8865 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
8869 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
8872 *) New config option to avoid instructions that are illegal on the 80386.
8873 The default code is faster, but requires at least a 486.
8876 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
8877 SSL2_SERVER_VERSION (not used at all) macros, which are now the
8878 same as SSL2_VERSION anyway.
8881 *) New "-showcerts" option for s_client.
8884 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
8885 application. Various cleanups and fixes.
8888 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
8889 modify error routines to work internally. Add error codes and PBE init
8890 to library startup routines.
8893 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
8894 packing functions to asn1 and evp. Changed function names and error
8895 codes along the way.
8898 *) PKCS12 integration: and so it begins... First of several patches to
8899 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
8900 objects to objects.h
8903 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
8904 and display support for Thawte strong extranet extension.
8907 *) Add LinuxPPC support.
8908 [Jeff Dubrule <igor@pobox.org>]
8910 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
8911 bn_div_words in alpha.s.
8912 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
8914 *) Make sure the RSA OAEP test is skipped under -DRSAref because
8915 OAEP isn't supported when OpenSSL is built with RSAref.
8916 [Ulf Moeller <ulf@fitug.de>]
8918 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
8919 so they no longer are missing under -DNOPROTO.
8920 [Soren S. Jorvang <soren@t.dk>]
8923 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
8925 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
8926 doesn't work when the session is reused. Coming soon!
8929 *) Fix a security hole, that allows sessions to be reused in the wrong
8930 context thus bypassing client cert protection! All software that uses
8931 client certs and session caches in multiple contexts NEEDS PATCHING to
8932 allow session reuse! A fuller solution is in the works.
8933 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
8935 *) Some more source tree cleanups (removed obsolete files
8936 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
8937 permission on "config" script to be executable) and a fix for the INSTALL
8939 [Ulf Moeller <ulf@fitug.de>]
8941 *) Remove some legacy and erroneous uses of malloc, free instead of
8943 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
8945 *) Make rsa_oaep_test return non-zero on error.
8946 [Ulf Moeller <ulf@fitug.de>]
8948 *) Add support for native Solaris shared libraries. Configure
8949 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
8950 if someone would make that last step automatic.
8951 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
8953 *) ctx_size was not built with the right compiler during "make links". Fixed.
8956 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
8957 except NULL ciphers". This means the default cipher list will no longer
8958 enable NULL ciphers. They need to be specifically enabled e.g. with
8959 the string "DEFAULT:eNULL".
8962 *) Fix to RSA private encryption routines: if p < q then it would
8963 occasionally produce an invalid result. This will only happen with
8964 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
8967 *) Be less restrictive and allow also `perl util/perlpath.pl
8968 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
8969 because this way one can also use an interpreter named `perl5' (which is
8970 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
8971 installed as `perl').
8972 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
8974 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
8975 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
8977 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
8978 advapi32.lib to Win32 build and change the pem test comparision
8979 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
8980 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
8981 and crypto/des/ede_cbcm_enc.c.
8984 *) DES quad checksum was broken on big-endian architectures. Fixed.
8987 *) Comment out two functions in bio.h that aren't implemented. Fix up the
8988 Win32 test batch file so it (might) work again. The Win32 test batch file
8989 is horrible: I feel ill....
8992 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
8993 in e_os.h. Audit of header files to check ANSI and non ANSI
8994 sections: 10 functions were absent from non ANSI section and not exported
8995 from Windows DLLs. Fixed up libeay.num for new functions.
8998 *) Make `openssl version' output lines consistent.
8999 [Ralf S. Engelschall]
9001 *) Fix Win32 symbol export lists for BIO functions: Added
9002 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
9003 to ms/libeay{16,32}.def.
9004 [Ralf S. Engelschall]
9006 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
9007 fine under Unix and passes some trivial tests I've now added. But the
9008 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
9009 added to make sure no one expects that this stuff really works in the
9010 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
9011 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
9013 [Ralf S. Engelschall]
9015 *) Fix the generation of two part addresses in perl.
9016 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
9018 *) Add config entry for Linux on MIPS.
9019 [John Tobey <jtobey@channel1.com>]
9021 *) Make links whenever Configure is run, unless we are on Windoze.
9024 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
9025 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
9029 *) Add a useful kludge to allow package maintainers to specify compiler and
9030 other platforms details on the command line without having to patch the
9031 Configure script everytime: One now can use ``perl Configure
9032 <id>:<details>'', i.e. platform ids are allowed to have details appended
9033 to them (seperated by colons). This is treated as there would be a static
9034 pre-configured entry in Configure's %table under key <id> with value
9035 <details> and ``perl Configure <id>'' is called. So, when you want to
9036 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
9037 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
9038 now, which overrides the FreeBSD-elf entry on-the-fly.
9039 [Ralf S. Engelschall]
9041 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
9044 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
9045 on the `perl Configure ...' command line. This way one can compile
9046 OpenSSL libraries with Position Independent Code (PIC) which is needed
9047 for linking it into DSOs.
9048 [Ralf S. Engelschall]
9050 *) Remarkably, export ciphers were totally broken and no-one had noticed!
9054 *) Cleaned up the LICENSE document: The official contact for any license
9055 questions now is the OpenSSL core team under openssl-core@openssl.org.
9056 And add a paragraph about the dual-license situation to make sure people
9057 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
9058 to the OpenSSL toolkit.
9059 [Ralf S. Engelschall]
9061 *) General source tree makefile cleanups: Made `making xxx in yyy...'
9062 display consistent in the source tree and replaced `/bin/rm' by `rm'.
9063 Additonally cleaned up the `make links' target: Remove unnecessary
9064 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
9065 to speed processing and no longer clutter the display with confusing
9066 stuff. Instead only the actually done links are displayed.
9067 [Ralf S. Engelschall]
9069 *) Permit null encryption ciphersuites, used for authentication only. It used
9070 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
9071 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
9075 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
9076 signed attributes when verifying signatures (this would break them),
9077 the detached data encoding was wrong and public keys obtained using
9078 X509_get_pubkey() weren't freed.
9081 *) Add text documentation for the BUFFER functions. Also added a work around
9082 to a Win95 console bug. This was triggered by the password read stuff: the
9083 last character typed gets carried over to the next fread(). If you were
9084 generating a new cert request using 'req' for example then the last
9085 character of the passphrase would be CR which would then enter the first
9089 *) Added the new `Includes OpenSSL Cryptography Software' button as
9090 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
9091 button and can be used by applications based on OpenSSL to show the
9092 relationship to the OpenSSL project.
9093 [Ralf S. Engelschall]
9095 *) Remove confusing variables in function signatures in files
9096 ssl/ssl_lib.c and ssl/ssl.h.
9097 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9099 *) Don't install bss_file.c under PREFIX/include/
9100 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9102 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
9103 functions that return function pointers and has support for NT specific
9104 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
9105 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
9106 unsigned to signed types: this was killing the Win32 compile.
9109 *) Add new certificate file to stack functions,
9110 SSL_add_dir_cert_subjects_to_stack() and
9111 SSL_add_file_cert_subjects_to_stack(). These largely supplant
9112 SSL_load_client_CA_file(), and can be used to add multiple certs easily
9113 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
9114 This means that Apache-SSL and similar packages don't have to mess around
9115 to add as many CAs as they want to the preferred list.
9118 *) Experiment with doxygen documentation. Currently only partially applied to
9120 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
9121 openssl.doxy as the configuration file.
9124 *) Get rid of remaining C++-style comments which strict C compilers hate.
9125 [Ralf S. Engelschall, pointed out by Carlos Amengual]
9127 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
9128 compiled in by default: it has problems with large keys.
9131 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
9132 DH private keys and/or callback functions which directly correspond to
9133 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
9134 is needed for applications which have to configure certificates on a
9135 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
9137 For the RSA certificate situation is makes no difference, but
9138 for the DSA certificate situation this fixes the "no shared cipher"
9139 problem where the OpenSSL cipher selection procedure failed because the
9140 temporary keys were not overtaken from the context and the API provided
9141 no way to reconfigure them.
9142 The new functions now let applications reconfigure the stuff and they
9143 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
9144 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
9145 non-public-API function ssl_cert_instantiate() is used as a helper
9146 function and also to reduce code redundancy inside ssl_rsa.c.
9147 [Ralf S. Engelschall]
9149 *) Move s_server -dcert and -dkey options out of the undocumented feature
9150 area because they are useful for the DSA situation and should be
9151 recognized by the users.
9152 [Ralf S. Engelschall]
9154 *) Fix the cipher decision scheme for export ciphers: the export bits are
9155 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
9156 SSL_EXP_MASK. So, the original variable has to be used instead of the
9157 already masked variable.
9158 [Richard Levitte <levitte@stacken.kth.se>]
9160 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
9161 [Richard Levitte <levitte@stacken.kth.se>]
9163 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
9164 from `int' to `unsigned int' because it's a length and initialized by
9165 EVP_DigestFinal() which expects an `unsigned int *'.
9166 [Richard Levitte <levitte@stacken.kth.se>]
9168 *) Don't hard-code path to Perl interpreter on shebang line of Configure
9169 script. Instead use the usual Shell->Perl transition trick.
9170 [Ralf S. Engelschall]
9172 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
9173 (in addition to RSA certificates) to match the behaviour of `openssl dsa
9174 -noout -modulus' as it's already the case for `openssl rsa -noout
9175 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
9176 currently the public key is printed (a decision which was already done by
9177 `openssl dsa -modulus' in the past) which serves a similar purpose.
9178 Additionally the NO_RSA no longer completely removes the whole -modulus
9179 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
9181 [Ralf S. Engelschall]
9183 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
9184 BIO. See the source (crypto/evp/bio_ok.c) for more info.
9185 [Arne Ansper <arne@ats.cyber.ee>]
9187 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
9188 to be added. Now both 'req' and 'ca' can use new objects defined in the
9192 *) Add cool BIO that does syslog (or event log on NT).
9193 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
9195 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
9196 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
9197 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
9198 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
9201 *) Add preliminary config info for new extension code.
9204 *) Make RSA_NO_PADDING really use no padding.
9205 [Ulf Moeller <ulf@fitug.de>]
9207 *) Generate errors when private/public key check is done.
9210 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
9211 for some CRL extensions and new objects added.
9214 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
9215 key usage extension and fuller support for authority key id.
9218 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
9219 padding method for RSA, which is recommended for new applications in PKCS
9220 #1 v2.0 (RFC 2437, October 1998).
9221 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
9222 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
9223 against Bleichbacher's attack on RSA.
9224 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
9227 *) Updates to the new SSL compression code
9228 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9230 *) Fix so that the version number in the master secret, when passed
9231 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
9232 (because the server will not accept higher), that the version number
9233 is 0x03,0x01, not 0x03,0x00
9234 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9236 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
9237 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
9238 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
9241 *) Support for RAW extensions where an arbitrary extension can be
9242 created by including its DER encoding. See apps/openssl.cnf for
9246 *) Make sure latest Perl versions don't interpret some generated C array
9247 code as Perl array code in the crypto/err/err_genc.pl script.
9248 [Lars Weber <3weber@informatik.uni-hamburg.de>]
9250 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
9251 not many people have the assembler. Various Win32 compilation fixes and
9252 update to the INSTALL.W32 file with (hopefully) more accurate Win32
9256 *) Modify configure script 'Configure' to automatically create crypto/date.h
9257 file under Win32 and also build pem.h from pem.org. New script
9258 util/mkfiles.pl to create the MINFO file on environments that can't do a
9259 'make files': perl util/mkfiles.pl >MINFO should work.
9262 *) Major rework of DES function declarations, in the pursuit of correctness
9263 and purity. As a result, many evil casts evaporated, and some weirdness,
9264 too. You may find this causes warnings in your code. Zapping your evil
9265 casts will probably fix them. Mostly.
9268 *) Fix for a typo in asn1.h. Bug fix to object creation script
9269 obj_dat.pl. It considered a zero in an object definition to mean
9270 "end of object": none of the objects in objects.h have any zeros
9271 so it wasn't spotted.
9272 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
9274 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
9275 Masking (CBCM). In the absence of test vectors, the best I have been able
9276 to do is check that the decrypt undoes the encrypt, so far. Send me test
9277 vectors if you have them.
9280 *) Correct calculation of key length for export ciphers (too much space was
9281 allocated for null ciphers). This has not been tested!
9284 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
9285 message is now correct (it understands "crypto" and "ssl" on its
9286 command line). There is also now an "update" option. This will update
9287 the util/ssleay.num and util/libeay.num files with any new functions.
9289 perl util/mkdef.pl crypto ssl update
9290 it will update them.
9293 *) Overhauled the Perl interface (perl/*):
9294 - ported BN stuff to OpenSSL's different BN library
9295 - made the perl/ source tree CVS-aware
9296 - renamed the package from SSLeay to OpenSSL (the files still contain
9297 their history because I've copied them in the repository)
9298 - removed obsolete files (the test scripts will be replaced
9299 by better Test::Harness variants in the future)
9300 [Ralf S. Engelschall]
9302 *) First cut for a very conservative source tree cleanup:
9303 1. merge various obsolete readme texts into doc/ssleay.txt
9304 where we collect the old documents and readme texts.
9305 2. remove the first part of files where I'm already sure that we no
9306 longer need them because of three reasons: either they are just temporary
9307 files which were left by Eric or they are preserved original files where
9308 I've verified that the diff is also available in the CVS via "cvs diff
9309 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
9310 the crypto/md/ stuff).
9311 [Ralf S. Engelschall]
9313 *) More extension code. Incomplete support for subject and issuer alt
9314 name, issuer and authority key id. Change the i2v function parameters
9315 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
9316 what that's for :-) Fix to ASN1 macro which messed up
9317 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
9320 *) Preliminary support for ENUMERATED type. This is largely copied from the
9324 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
9325 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9327 *) Make sure `make rehash' target really finds the `openssl' program.
9328 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
9330 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
9331 like to hear about it if this slows down other processors.
9334 *) Add CygWin32 platform information to Configure script.
9335 [Alan Batie <batie@aahz.jf.intel.com>]
9337 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
9338 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
9340 *) New program nseq to manipulate netscape certificate sequences
9343 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
9347 *) Fixes to BN code. Previously the default was to define BN_RECURSION
9348 but the BN code had some problems that would cause failures when
9349 doing certificate verification and some other functions.
9350 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9352 *) Add ASN1 and PEM code to support netscape certificate sequences.
9355 *) Add ASN1 and PEM code to support netscape certificate sequences.
9358 *) Add several PKIX and private extended key usage OIDs.
9361 *) Modify the 'ca' program to handle the new extension code. Modify
9362 openssl.cnf for new extension format, add comments.
9365 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
9366 and add a sample to openssl.cnf so req -x509 now adds appropriate
9370 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
9371 error code, add initial support to X509_print() and x509 application.
9374 *) Takes a deep breath and start addding X509 V3 extension support code. Add
9375 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
9376 stuff is currently isolated and isn't even compiled yet.
9379 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
9380 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
9381 Removed the versions check from X509 routines when loading extensions:
9382 this allows certain broken certificates that don't set the version
9383 properly to be processed.
9386 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
9387 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
9388 can still be regenerated with "make depend".
9391 *) Spelling mistake in C version of CAST-128.
9392 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
9394 *) Changes to the error generation code. The perl script err-code.pl
9395 now reads in the old error codes and retains the old numbers, only
9396 adding new ones if necessary. It also only changes the .err files if new
9397 codes are added. The makefiles have been modified to only insert errors
9398 when needed (to avoid needlessly modifying header files). This is done
9399 by only inserting errors if the .err file is newer than the auto generated
9400 C file. To rebuild all the error codes from scratch (the old behaviour)
9401 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
9402 or delete all the .err files.
9405 *) CAST-128 was incorrectly implemented for short keys. The C version has
9406 been fixed, but is untested. The assembler versions are also fixed, but
9407 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
9408 to regenerate it if needed.
9409 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
9410 Hagino <itojun@kame.net>]
9412 *) File was opened incorrectly in randfile.c.
9413 [Ulf Möller <ulf@fitug.de>]
9415 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
9416 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
9417 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
9418 al: it's just almost always a UTCTime. Note this patch adds new error
9419 codes so do a "make errors" if there are problems.
9422 *) Correct Linux 1 recognition in config.
9423 [Ulf Möller <ulf@fitug.de>]
9425 *) Remove pointless MD5 hash when using DSA keys in ca.
9426 [Anonymous <nobody@replay.com>]
9428 *) Generate an error if given an empty string as a cert directory. Also
9429 generate an error if handed NULL (previously returned 0 to indicate an
9430 error, but didn't set one).
9431 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
9433 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
9436 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
9437 parameters. This was causing a warning which killed off the Win32 compile.
9440 *) Remove C++ style comments from crypto/bn/bn_local.h.
9441 [Neil Costigan <neil.costigan@celocom.com>]
9443 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
9444 based on a text string, looking up short and long names and finally
9445 "dot" format. The "dot" format stuff didn't work. Added new function
9446 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
9447 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
9448 OID is not part of the table.
9451 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
9452 X509_LOOKUP_by_alias().
9455 *) Sort openssl functions by name.
9458 *) Get the gendsa program working (hopefully) and add it to app list. Remove
9459 encryption from sample DSA keys (in case anyone is interested the password
9463 *) Make _all_ *_free functions accept a NULL pointer.
9464 [Frans Heymans <fheymans@isaserver.be>]
9466 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
9468 [Anonymous <nobody@replay.com>]
9470 *) s_server should send the CAfile as acceptable CAs, not its own cert.
9471 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9473 *) Don't blow it for numeric -newkey arguments to apps/req.
9474 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9476 *) Temp key "for export" tests were wrong in s3_srvr.c.
9477 [Anonymous <nobody@replay.com>]
9479 *) Add prototype for temp key callback functions
9480 SSL_CTX_set_tmp_{rsa,dh}_callback().
9483 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
9484 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
9487 *) X509_name_add_entry() freed the wrong thing after an error.
9488 [Arne Ansper <arne@ats.cyber.ee>]
9490 *) rsa_eay.c would attempt to free a NULL context.
9491 [Arne Ansper <arne@ats.cyber.ee>]
9493 *) BIO_s_socket() had a broken should_retry() on Windoze.
9494 [Arne Ansper <arne@ats.cyber.ee>]
9496 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
9497 [Arne Ansper <arne@ats.cyber.ee>]
9499 *) Make sure the already existing X509_STORE->depth variable is initialized
9500 in X509_STORE_new(), but document the fact that this variable is still
9501 unused in the certificate verification process.
9502 [Ralf S. Engelschall]
9504 *) Fix the various library and apps files to free up pkeys obtained from
9505 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
9508 *) Fix reference counting in X509_PUBKEY_get(). This makes
9509 demos/maurice/example2.c work, amongst others, probably.
9510 [Steve Henson and Ben Laurie]
9512 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
9513 `openssl' and second, the shortcut symlinks for the `openssl <command>'
9514 are no longer created. This way we have a single and consistent command
9515 line interface `openssl <command>', similar to `cvs <command>'.
9516 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
9518 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
9519 BIT STRING wrapper always have zero unused bits.
9522 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
9525 *) Make the top-level INSTALL documentation easier to understand.
9528 *) Makefiles updated to exit if an error occurs in a sub-directory
9529 make (including if user presses ^C) [Paul Sutton]
9531 *) Make Montgomery context stuff explicit in RSA data structure.
9534 *) Fix build order of pem and err to allow for generated pem.h.
9537 *) Fix renumbering bug in X509_NAME_delete_entry().
9540 *) Enhanced the err-ins.pl script so it makes the error library number
9541 global and can add a library name. This is needed for external ASN1 and
9542 other error libraries.
9545 *) Fixed sk_insert which never worked properly.
9548 *) Fix ASN1 macros so they can handle indefinite length construted
9549 EXPLICIT tags. Some non standard certificates use these: they can now
9553 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
9554 into a single doc/ssleay.txt bundle. This way the information is still
9555 preserved but no longer messes up this directory. Now it's new room for
9556 the new set of documenation files.
9557 [Ralf S. Engelschall]
9559 *) SETs were incorrectly DER encoded. This was a major pain, because they
9560 shared code with SEQUENCEs, which aren't coded the same. This means that
9561 almost everything to do with SETs or SEQUENCEs has either changed name or
9562 number of arguments.
9563 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
9565 *) Fix test data to work with the above.
9568 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
9569 was already fixed by Eric for 0.9.1 it seems.
9570 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
9572 *) Autodetect FreeBSD3.
9575 *) Fix various bugs in Configure. This affects the following platforms:
9579 unixware-2.0-pentium
9583 *) Eliminate generated files from CVS. Reorder tests to regenerate files
9584 before they are needed.
9587 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
9591 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
9593 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
9594 changed SSLeay to OpenSSL in version strings.
9595 [Ralf S. Engelschall]
9597 *) Some fixups to the top-level documents.
9600 *) Fixed the nasty bug where rsaref.h was not found under compile-time
9601 because the symlink to include/ was missing.
9602 [Ralf S. Engelschall]
9604 *) Incorporated the popular no-RSA/DSA-only patches
9605 which allow to compile a RSA-free SSLeay.
9606 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
9608 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
9609 when "ssleay" is still not found.
9610 [Ralf S. Engelschall]
9612 *) Added more platforms to Configure: Cray T3E, HPUX 11,
9613 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
9615 *) Updated the README file.
9616 [Ralf S. Engelschall]
9618 *) Added various .cvsignore files in the CVS repository subdirs
9619 to make a "cvs update" really silent.
9620 [Ralf S. Engelschall]
9622 *) Recompiled the error-definition header files and added
9623 missing symbols to the Win32 linker tables.
9624 [Ralf S. Engelschall]
9626 *) Cleaned up the top-level documents;
9627 o new files: CHANGES and LICENSE
9628 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
9629 o merged COPYRIGHT into LICENSE
9630 o removed obsolete TODO file
9631 o renamed MICROSOFT to INSTALL.W32
9632 [Ralf S. Engelschall]
9634 *) Removed dummy files from the 0.9.1b source tree:
9635 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
9636 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
9637 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
9638 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
9639 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
9640 [Ralf S. Engelschall]
9642 *) Added various platform portability fixes.
9645 *) The Genesis of the OpenSSL rpject:
9646 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
9647 Young and Tim J. Hudson created while they were working for C2Net until
9649 [The OpenSSL Project]
9652 Changes between 0.9.0b and 0.9.1b [not released]
9654 *) Updated a few CA certificates under certs/
9657 *) Changed some BIGNUM api stuff.
9660 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
9661 DGUX x86, Linux Alpha, etc.
9664 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
9665 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
9669 *) Add -strparse option to asn1pars program which parses nested
9671 [Dr Stephen Henson <shenson@bigfoot.com>]
9673 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
9676 *) DSA fix for "ca" program.
9679 *) Added "-genkey" option to "dsaparam" program.
9682 *) Added RIPE MD160 (rmd160) message digest.
9685 *) Added -a (all) option to "ssleay version" command.
9688 *) Added PLATFORM define which is the id given to Configure.
9691 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
9694 *) Extended the ASN.1 parser routines.
9697 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
9700 *) Added a BN_CTX to the BN library.
9703 *) Fixed the weak key values in DES library
9706 *) Changed API in EVP library for cipher aliases.
9709 *) Added support for RC2/64bit cipher.
9712 *) Converted the lhash library to the crypto/mem.c functions.
9715 *) Added more recognized ASN.1 object ids.
9718 *) Added more RSA padding checks for SSL/TLS.
9721 *) Added BIO proxy/filter functionality.
9724 *) Added extra_certs to SSL_CTX which can be used
9725 send extra CA certificates to the client in the CA cert chain sending
9726 process. It can be configured with SSL_CTX_add_extra_chain_cert().
9729 *) Now Fortezza is denied in the authentication phase because
9730 this is key exchange mechanism is not supported by SSLeay at all.
9733 *) Additional PKCS1 checks.
9736 *) Support the string "TLSv1" for all TLS v1 ciphers.
9739 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
9740 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
9743 *) Fixed a few memory leaks.
9746 *) Fixed various code and comment typos.
9749 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
9750 bytes sent in the client random.
9751 [Edward Bishop <ebishop@spyglass.com>]