5 Changes between 0.9.6b and 0.9.6c [XX xxx XXXX]
9 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
11 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
12 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
13 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
14 PRNG state recovery was possible based on the output of
15 one PRNG request appropriately sized to gain knowledge on
16 'md' followed by enough consecutive 1-byte PRNG requests
17 to traverse all of 'state'.
19 1. When updating 'md_local' (the current thread's copy of 'md')
20 during PRNG output generation, hash all of the previous
21 'md_local' value, not just the half used for PRNG output.
23 2. Make the number of bytes from 'state' included into the hash
24 independent from the number of PRNG bytes requested.
26 The first measure alone would be sufficient to avoid
27 Markku-Juhani's attack. (Actually it had never occurred
28 to me that the half of 'md_local' used for chaining was the
29 half from which PRNG output bytes were taken -- I had always
30 assumed that the secret half would be used.) The second
31 measure makes sure that additional data from 'state' is never
32 mixed into 'md_local' in small portions; this heuristically
33 further strengthens the PRNG.
36 *) Fix crypto/bn/asm/mips3.s.
39 *) When only the key is given to "enc", the IV is undefined. Print out
40 an error message in this case.
43 *) Handle special case when X509_NAME is empty in X509 printing routines.
46 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
47 positive and less than q.
50 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
51 used: it isn't thread safe and the add_lock_callback should handle
53 [Paul Rose <Paul.Rose@bridge.com>]
55 *) Verify that incoming data obeys the block size in
56 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
60 [Ulf Möller, Bodo Möller]
62 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
63 RSA encryption was accidentily removed in s3_srvr.c in OpenSSL 0.9.5
64 when fixing the server behaviour for backwards-compatible 'client
65 hello' messages. (Note that the attack is impractical against
66 SSL 3.0 and TLS 1.0 anyway because length and version checking
67 means that the probability of guessing a valid ciphertext is
68 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
71 Before 0.9.5, the countermeasure (hide the error by generating a
72 random 'decryption result') did not work properly because
73 ERR_clear_error() was missing, meaning that SSL_get_error() would
74 detect the supposedly ignored error.
76 Both problems are now fixed.
79 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
80 (previously it was 1024).
83 *) Fix for compatibility mode trust settings: ignore trust settings
84 unless some valid trust or reject settings are present.
87 *) Fix for blowfish EVP: its a variable length cipher.
90 *) Fix various bugs related to DSA S/MIME verification. Handle missing
91 parameters in DSA public key structures and return an error in the
92 DSA routines if parameters are absent.
95 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
96 in the current directory if neither $RANDFILE nor $HOME was set.
97 RAND_file_name() in 0.9.6a returned NULL in this case. This has
98 caused some confusion to Windows users who haven't defined $HOME.
99 Thus RAND_file_name() is changed again: e_os.h can define a
100 DEFAULT_HOME, which will be used if $HOME is not set.
101 For Windows, we use "C:"; on other platforms, we still require
102 environment variables.
104 *) Move 'if (!initialized) RAND_poll()' into regions protected by
105 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
106 having multiple threads call RAND_poll() concurrently.
109 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
110 combination of a flag and a thread ID variable.
111 Otherwise while one thread is in ssleay_rand_bytes (which sets the
112 flag), *other* threads can enter ssleay_add_bytes without obeying
113 the CRYPTO_LOCK_RAND lock (and may even illegaly release the lock
114 that they do not hold after the first thread unsets add_do_not_lock).
117 *) Change bctest again: '-x' expressions are not available in all
121 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
123 *) Fix a couple of memory leaks in PKCS7_dataDecode()
124 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
126 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
127 the default extension for executables, if any. Also, make the perl
128 scripts that use symlink() to test if it really exists and use "cp"
129 if it doesn't. All this made OpenSSL compilable and installable in
133 *) Fix for asn1_GetSequence() for indefinite length constructed data.
134 If SEQUENCE is length is indefinite just set c->slen to the total
135 amount of data available.
136 [Steve Henson, reported by shige@FreeBSD.org]
137 [This change does not apply to 0.9.7.]
139 *) Change bctest to avoid here-documents inside command substitution
140 (workaround for FreeBSD /bin/sh bug).
141 For compatibility with Ultrix, avoid shell functions (introduced
142 in the bctest version that searches along $PATH).
145 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
146 with des_encrypt() defined on some operating systems, like Solaris
150 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
151 On the Importance of Eliminating Errors in Cryptographic
152 Computations, J. Cryptology 14 (2001) 2, 101-119,
153 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
156 *) MIPS assembler BIGNUM division bug fix.
159 *) Disabled incorrect Alpha assembler code.
162 *) Fix PKCS#7 decode routines so they correctly update the length
163 after reading an EOC for the EXPLICIT tag.
165 [This change does not apply to 0.9.7.]
167 *) Fix bug in PKCS#12 key generation routines. This was triggered
168 if a 3DES key was generated with a 0 initial byte. Include
169 PKCS12_BROKEN_KEYGEN compilation option to retain the old
170 (but broken) behaviour.
173 *) Enhance bctest to search for a working bc along $PATH and print
175 [Tim Rice <tim@multitalents.net> via Richard Levitte]
177 *) Fix memory leaks in err.c: free err_data string if necessary;
178 don't write to the wrong index in ERR_set_error_data.
181 *) Implement ssl23_peek (analogous to ssl23_read), which previously
185 *) Replace rdtsc with _emit statements for VC++ version 5.
186 [Jeremy Cooper <jeremy@baymoo.org>]
188 *) Make it possible to reuse SSLv2 sessions.
191 *) In copy_email() check for >= 0 as a return value for
192 X509_NAME_get_index_by_NID() since 0 is a valid index.
193 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
195 *) Avoid coredump with unsupported or invalid public keys by checking if
196 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
197 PKCS7_verify() fails with non detached data.
200 *) Don't use getenv in library functions when run as setuid/setgid.
201 New function OPENSSL_issetugid().
204 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
205 due to incorrect handling of multi-threading:
207 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
209 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
211 3. Count how many times MemCheck_off() has been called so that
212 nested use can be treated correctly. This also avoids
213 inband-signalling in the previous code (which relied on the
214 assumption that thread ID 0 is impossible).
217 *) Add "-rand" option also to s_client and s_server.
220 *) Fix CPU detection on Irix 6.x.
221 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
222 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
224 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
227 [This change does not apply to 0.9.7.]
229 *) Use the cached encoding of an X509_NAME structure rather than
230 copying it. This is apparently the reason for the libsafe "errors"
231 but the code is actually correct.
234 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
235 Bleichenbacher's DSA attack.
236 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
237 to be set and top=0 forces the highest bit to be set; top=-1 is new
238 and leaves the highest bit random.
239 [Ulf Moeller, Bodo Moeller]
241 *) In the NCONF_...-based implementations for CONF_... queries
242 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
243 a temporary CONF structure with the data component set to NULL
244 (which gives segmentation faults in lh_retrieve).
245 Instead, use NULL for the CONF pointer in CONF_get_string and
246 CONF_get_number (which may use environment variables) and directly
247 return NULL from CONF_get_section.
250 *) Fix potential buffer overrun for EBCDIC.
253 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
254 keyUsage if basicConstraints absent for a CA.
257 *) Make SMIME_write_PKCS7() write mail header values with a format that
258 is more generally accepted (no spaces before the semicolon), since
259 some programs can't parse those values properly otherwise. Also make
260 sure BIO's that break lines after each write do not create invalid
264 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
265 macros previously used would not encode an empty SEQUENCE OF
266 and break the signature.
268 [This change does not apply to 0.9.7.]
270 *) Zero the premaster secret after deriving the master secret in
274 *) Add some EVP_add_digest_alias registrations (as found in
275 OpenSSL_add_all_digests()) to SSL_library_init()
276 aka OpenSSL_add_ssl_algorithms(). This provides improved
277 compatibility with peers using X.509 certificates
278 with unconventional AlgorithmIdentifier OIDs.
281 *) Fix for Irix with NO_ASM.
282 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
284 *) ./config script fixes.
285 [Ulf Moeller, Richard Levitte]
287 *) Fix 'openssl passwd -1'.
290 *) Change PKCS12_key_gen_asc() so it can cope with non null
291 terminated strings whose length is passed in the passlen
292 parameter, for example from PEM callbacks. This was done
293 by adding an extra length parameter to asc2uni().
294 [Steve Henson, reported by <oddissey@samsung.co.kr>]
296 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
297 call failed, free the DSA structure.
300 *) Fix to uni2asc() to cope with zero length Unicode strings.
301 These are present in some PKCS#12 files.
304 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
305 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
306 when writing a 32767 byte record.
307 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
309 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
310 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
312 (RSA objects have a reference count access to which is protected
313 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
314 so they are meant to be shared between threads.)
315 [Bodo Moeller, Geoff Thorpe; original patch submitted by
316 "Reddie, Steven" <Steven.Reddie@ca.com>]
318 *) Fix a deadlock in CRYPTO_mem_leaks().
321 *) Use better test patterns in bntest.
324 *) rand_win.c fix for Borland C.
327 *) BN_rshift bugfix for n == 0.
330 *) Add a 'bctest' script that checks for some known 'bc' bugs
331 so that 'make test' does not abort just because 'bc' is broken.
334 *) Store verify_result within SSL_SESSION also for client side to
335 avoid potential security hole. (Re-used sessions on the client side
336 always resulted in verify_result==X509_V_OK, not using the original
337 result of the server certificate verification.)
340 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
341 SSL3_RT_APPLICATION_DATA, return 0.
342 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
346 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
347 releases, have been re-implemented by renaming the previous
348 implementations of ssl2_read and ssl3_read to ssl2_read_internal
349 and ssl3_read_internal, respectively, and adding 'peek' parameters
350 to them. The new ssl[23]_{read,peek} functions are calls to
351 ssl[23]_read_internal with the 'peek' flag set appropriately.
352 A 'peek' parameter has also been added to ssl3_read_bytes, which
353 does the actual work for ssl3_read_internal.
356 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
357 the method-specific "init()" handler. Also clean up ex_data after
358 calling the method-specific "finish()" handler. Previously, this was
359 happening the other way round.
362 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
363 The previous value, 12, was not always sufficient for BN_mod_exp().
366 *) Make sure that shared libraries get the internal name engine with
367 the full version number and not just 0. This should mark the
368 shared libraries as not backward compatible. Of course, this should
369 be changed again when we can guarantee backward binary compatibility.
372 *) Fix typo in get_cert_by_subject() in by_dir.c
373 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
375 *) Rework the system to generate shared libraries:
377 - Make note of the expected extension for the shared libraries and
378 if there is a need for symbolic links from for example libcrypto.so.0
379 to libcrypto.so.0.9.7. There is extended info in Configure for
382 - Make as few rebuilds of the shared libraries as possible.
384 - Still avoid linking the OpenSSL programs with the shared libraries.
386 - When installing, install the shared libraries separately from the
390 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
392 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
393 and not in SSL_clear because the latter is also used by the
394 accept/connect functions; previously, the settings made by
395 SSL_set_read_ahead would be lost during the handshake.
396 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
398 *) Correct util/mkdef.pl to be selective about disabled algorithms.
399 Previously, it would create entries for disableed algorithms no
403 *) Added several new manual pages for SSL_* function.
406 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
408 *) In ssl23_get_client_hello, generate an error message when faced
409 with an initial SSL 3.0/TLS record that is too small to contain the
410 first two bytes of the ClientHello message, i.e. client_version.
411 (Note that this is a pathologic case that probably has never happened
412 in real life.) The previous approach was to use the version number
413 from the record header as a substitute; but our protocol choice
414 should not depend on that one because it is not authenticated
415 by the Finished messages.
418 *) More robust randomness gathering functions for Windows.
419 [Jeffrey Altman <jaltman@columbia.edu>]
421 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
422 not set then we don't setup the error code for issuer check errors
423 to avoid possibly overwriting other errors which the callback does
424 handle. If an application does set the flag then we assume it knows
425 what it is doing and can handle the new informational codes
429 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
430 a general "ANY" type, as such it should be able to decode anything
431 including tagged types. However it didn't check the class so it would
432 wrongly interpret tagged types in the same way as their universal
433 counterpart and unknown types were just rejected. Changed so that the
434 tagged and unknown types are handled in the same way as a SEQUENCE:
435 that is the encoding is stored intact. There is also a new type
436 "V_ASN1_OTHER" which is used when the class is not universal, in this
437 case we have no idea what the actual type is so we just lump them all
441 *) On VMS, stdout may very well lead to a file that is written to
442 in a record-oriented fashion. That means that every write() will
443 write a separate record, which will be read separately by the
444 programs trying to read from it. This can be very confusing.
446 The solution is to put a BIO filter in the way that will buffer
447 text until a linefeed is reached, and then write everything a
448 line at a time, so every record written will be an actual line,
449 not chunks of lines and not (usually doesn't happen, but I've
450 seen it once) several lines in one record. BIO_f_linebuffer() is
453 Currently, it's a VMS-only method, because that's where it has
454 been tested well enough.
457 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
458 it can return incorrect results.
459 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
460 but it was in 0.9.6-beta[12].)
463 *) Disable the check for content being present when verifying detached
464 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
465 include zero length content when signing messages.
468 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
469 BIO_ctrl (for BIO pairs).
472 *) Add DSO method for VMS.
475 *) Bug fix: Montgomery multiplication could produce results with the
479 *) Add RPM specification openssl.spec and modify it to build three
480 packages. The default package contains applications, application
481 documentation and run-time libraries. The devel package contains
482 include files, static libraries and function documentation. The
483 doc package contains the contents of the doc directory. The original
484 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
487 *) Add a large number of documentation files for many SSL routines.
488 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
490 *) Add a configuration entry for Sony News 4.
491 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
493 *) Don't set the two most significant bits to one when generating a
494 random number < q in the DSA library.
497 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
498 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
499 the underlying transport is blocking) if a handshake took place.
500 (The default behaviour is needed by applications such as s_client
501 and s_server that use select() to determine when to use SSL_read;
502 but for applications that know in advance when to expect data, it
503 just makes things more complicated.)
506 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
510 *) Add a few more EBCDIC conditionals that make `req' and `x509'
511 work better on such systems.
512 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
514 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
515 Update PKCS12_parse() so it copies the friendlyName and the
516 keyid to the certificates aux info.
519 *) Fix bug in PKCS7_verify() which caused an infinite loop
520 if there was more than one signature.
521 [Sven Uszpelkat <su@celocom.de>]
523 *) Major change in util/mkdef.pl to include extra information
524 about each symbol, as well as presentig variables as well
525 as functions. This change means that there's n more need
526 to rebuild the .num files when some algorithms are excluded.
529 *) Allow the verify time to be set by an application,
530 rather than always using the current time.
533 *) Phase 2 verify code reorganisation. The certificate
534 verify code now looks up an issuer certificate by a
535 number of criteria: subject name, authority key id
536 and key usage. It also verifies self signed certificates
537 by the same criteria. The main comparison function is
538 X509_check_issued() which performs these checks.
540 Lot of changes were necessary in order to support this
541 without completely rewriting the lookup code.
543 Authority and subject key identifier are now cached.
545 The LHASH 'certs' is X509_STORE has now been replaced
546 by a STACK_OF(X509_OBJECT). This is mainly because an
547 LHASH can't store or retrieve multiple objects with
550 As a result various functions (which were all internal
551 use only) have changed to handle the new X509_STORE
552 structure. This will break anything that messed round
553 with X509_STORE internally.
555 The functions X509_STORE_add_cert() now checks for an
556 exact match, rather than just subject name.
558 The X509_STORE API doesn't directly support the retrieval
559 of multiple certificates matching a given criteria, however
560 this can be worked round by performing a lookup first
561 (which will fill the cache with candidate certificates)
562 and then examining the cache for matches. This is probably
563 the best we can do without throwing out X509_LOOKUP
564 entirely (maybe later...).
566 The X509_VERIFY_CTX structure has been enhanced considerably.
568 All certificate lookup operations now go via a get_issuer()
569 callback. Although this currently uses an X509_STORE it
570 can be replaced by custom lookups. This is a simple way
571 to bypass the X509_STORE hackery necessary to make this
572 work and makes it possible to use more efficient techniques
573 in future. A very simple version which uses a simple
574 STACK for its trusted certificate store is also provided
575 using X509_STORE_CTX_trusted_stack().
577 The verify_cb() and verify() callbacks now have equivalents
578 in the X509_STORE_CTX structure.
580 X509_STORE_CTX also has a 'flags' field which can be used
581 to customise the verify behaviour.
584 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
585 excludes S/MIME capabilities.
588 *) When a certificate request is read in keep a copy of the
589 original encoding of the signed data and use it when outputing
590 again. Signatures then use the original encoding rather than
591 a decoded, encoded version which may cause problems if the
592 request is improperly encoded.
595 *) For consistency with other BIO_puts implementations, call
596 buffer_write(b, ...) directly in buffer_puts instead of calling
599 In BIO_puts, increment b->num_write as in BIO_write.
600 [Peter.Sylvester@EdelWeb.fr]
602 *) Fix BN_mul_word for the case where the word is 0. (We have to use
603 BN_zero, we may not return a BIGNUM with an array consisting of
607 *) Avoid calling abort() from within the library when problems are
608 detected, except if preprocessor symbols have been defined
609 (such as REF_CHECK, BN_DEBUG etc.).
612 *) New openssl application 'rsautl'. This utility can be
613 used for low level RSA operations. DER public key
614 BIO/fp routines also added.
617 *) New Configure entry and patches for compiling on QNX 4.
618 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
620 *) A demo state-machine implementation was sponsored by
621 Nuron (http://www.nuron.com/) and is now available in
625 *) New options added to the 'dgst' utility for signature
626 generation and verification.
629 *) Unrecognized PKCS#7 content types are now handled via a
630 catch all ASN1_TYPE structure. This allows unsupported
631 types to be stored as a "blob" and an application can
632 encode and decode it manually.
635 *) Fix various signed/unsigned issues to make a_strex.c
637 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
639 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
640 length if passed a buffer. ASN1_INTEGER_to_BN failed
641 if passed a NULL BN and its argument was negative.
642 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
644 *) Modification to PKCS#7 encoding routines to output definite
645 length encoding. Since currently the whole structures are in
646 memory there's not real point in using indefinite length
647 constructed encoding. However if OpenSSL is compiled with
648 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
651 *) Added BIO_vprintf() and BIO_vsnprintf().
654 *) Added more prefixes to parse for in the the strings written
655 through a logging bio, to cover all the levels that are available
656 through syslog. The prefixes are now:
658 PANIC, EMERG, EMR => LOG_EMERG
659 ALERT, ALR => LOG_ALERT
660 CRIT, CRI => LOG_CRIT
661 ERROR, ERR => LOG_ERR
662 WARNING, WARN, WAR => LOG_WARNING
663 NOTICE, NOTE, NOT => LOG_NOTICE
664 INFO, INF => LOG_INFO
665 DEBUG, DBG => LOG_DEBUG
667 and as before, if none of those prefixes are present at the
668 beginning of the string, LOG_ERR is chosen.
670 On Win32, the LOG_* levels are mapped according to this:
672 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
673 LOG_WARNING => EVENTLOG_WARNING_TYPE
674 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
678 *) Made it possible to reconfigure with just the configuration
679 argument "reconf" or "reconfigure". The command line arguments
680 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
681 and are retrieved from there when reconfiguring.
685 [Assar Westerlund <assar@sics.se>, Richard Levitte]
687 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
690 *) The obj_dat.pl script was messing up the sorting of object
691 names. The reason was that it compared the quoted version
692 of strings as a result "OCSP" > "OCSP Signing" because
693 " > SPACE. Changed script to store unquoted versions of
694 names and add quotes on output. It was also omitting some
695 names from the lookup table if they were given a default
696 value (that is if SN is missing it is given the same
697 value as LN and vice versa), these are now added on the
698 grounds that if an object has a name we should be able to
699 look it up. Finally added warning output when duplicate
700 short or long names are found.
703 *) Changes needed for Tandem NSK.
704 [Scott Uroff <scott@xypro.com>]
706 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
707 RSA_padding_check_SSLv23(), special padding was never detected
708 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
709 version rollback attacks was not effective.
711 In s23_clnt.c, don't use special rollback-attack detection padding
712 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
713 client; similarly, in s23_srvr.c, don't do the rollback check if
714 SSL 2.0 is the only protocol enabled in the server.
717 *) Make it possible to get hexdumps of unprintable data with 'openssl
718 asn1parse'. By implication, the functions ASN1_parse_dump() and
719 BIO_dump_indent() are added.
722 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
723 these print out strings and name structures based on various
724 flags including RFC2253 support and proper handling of
725 multibyte characters. Added options to the 'x509' utility
726 to allow the various flags to be set.
729 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
730 Also change the functions X509_cmp_current_time() and
731 X509_gmtime_adj() work with an ASN1_TIME structure,
732 this will enable certificates using GeneralizedTime in validity
736 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
737 negative public key encodings) on by default,
738 NO_NEG_PUBKEY_BUG can be set to disable it.
741 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
742 content octets. An i2c_ASN1_OBJECT is unnecessary because
743 the encoding can be trivially obtained from the structure.
746 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
747 not read locks (CRYPTO_r_[un]lock).
750 *) A first attempt at creating official support for shared
751 libraries through configuration. I've kept it so the
752 default is static libraries only, and the OpenSSL programs
753 are always statically linked for now, but there are
754 preparations for dynamic linking in place.
755 This has been tested on Linux and True64.
758 *) Randomness polling function for Win9x, as described in:
759 Peter Gutmann, Software Generation of Practically Strong
763 *) Fix so PRNG is seeded in req if using an already existing
767 *) New options to smime application. -inform and -outform
768 allow alternative formats for the S/MIME message including
769 PEM and DER. The -content option allows the content to be
770 specified separately. This should allow things like Netscape
771 form signing output easier to verify.
774 *) Fix the ASN1 encoding of tags using the 'long form'.
777 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
778 STRING types. These convert content octets to and from the
779 underlying type. The actual tag and length octets are
780 already assumed to have been read in and checked. These
781 are needed because all other string types have virtually
782 identical handling apart from the tag. By having versions
783 of the ASN1 functions that just operate on content octets
784 IMPLICIT tagging can be handled properly. It also allows
785 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
786 and ASN1_INTEGER are identical apart from the tag.
789 *) Change the handling of OID objects as follows:
791 - New object identifiers are inserted in objects.txt, following
792 the syntax given in objects.README.
793 - objects.pl is used to process obj_mac.num and create a new
795 - obj_dat.pl is used to create a new obj_dat.h, using the data in
798 This is currently kind of a hack, and the perl code in objects.pl
799 isn't very elegant, but it works as I intended. The simplest way
800 to check that it worked correctly is to look in obj_dat.h and
801 check the array nid_objs and make sure the objects haven't moved
802 around (this is important!). Additions are OK, as well as
803 consistent name changes.
806 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
809 *) Addition of the command line parameter '-rand file' to 'openssl req'.
810 The given file adds to whatever has already been seeded into the
811 random pool through the RANDFILE configuration file option or
812 environment variable, or the default random state file.
815 *) mkstack.pl now sorts each macro group into lexical order.
816 Previously the output order depended on the order the files
817 appeared in the directory, resulting in needless rewriting
821 *) Patches to make OpenSSL compile under Win32 again. Mostly
822 work arounds for the VC++ problem that it treats func() as
823 func(void). Also stripped out the parts of mkdef.pl that
824 added extra typesafe functions: these no longer exist.
827 *) Reorganisation of the stack code. The macros are now all
828 collected in safestack.h . Each macro is defined in terms of
829 a "stack macro" of the form SKM_<name>(type, a, b). The
830 DEBUG_SAFESTACK is now handled in terms of function casts,
831 this has the advantage of retaining type safety without the
832 use of additional functions. If DEBUG_SAFESTACK is not defined
833 then the non typesafe macros are used instead. Also modified the
834 mkstack.pl script to handle the new form. Needs testing to see
835 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
836 the default if no major problems. Similar behaviour for ASN1_SET_OF
840 *) When some versions of IIS use the 'NET' form of private key the
841 key derivation algorithm is different. Normally MD5(password) is
842 used as a 128 bit RC4 key. In the modified case
843 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
844 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
845 as the old Netscape_RSA functions except they have an additional
846 'sgckey' parameter which uses the modified algorithm. Also added
847 an -sgckey command line option to the rsa utility. Thanks to
848 Adrian Peck <bertie@ncipher.com> for posting details of the modified
849 algorithm to openssl-dev.
852 *) The evp_local.h macros were using 'c.##kname' which resulted in
853 invalid expansion on some systems (SCO 5.0.5 for example).
854 Corrected to 'c.kname'.
855 [Phillip Porch <root@theporch.com>]
857 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
858 a STACK of email addresses from a certificate or request, these look
859 in the subject name and the subject alternative name extensions and
860 omit any duplicate addresses.
863 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
864 This makes DSA verification about 2 % faster.
867 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
868 (meaning that now 2^5 values will be precomputed, which is only 4 KB
869 plus overhead for 1024 bit moduli).
870 This makes exponentiations about 0.5 % faster for 1024 bit
871 exponents (as measured by "openssl speed rsa2048").
874 *) Rename memory handling macros to avoid conflicts with other
876 Malloc => OPENSSL_malloc
877 Malloc_locked => OPENSSL_malloc_locked
878 Realloc => OPENSSL_realloc
882 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
883 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
887 [John Jarvie <jjarvie@newsguy.com>]
889 *) The type-safe stack code has been rejigged. It is now only compiled
890 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
891 by default all type-specific stack functions are "#define"d back to
892 standard stack functions. This results in more streamlined output
893 but retains the type-safety checking possibilities of the original
897 *) The STACK code has been cleaned up, and certain type declarations
898 that didn't make a lot of sense have been brought in line. This has
899 also involved a cleanup of sorts in safestack.h to more correctly
900 map type-safe stack functions onto their plain stack counterparts.
901 This work has also resulted in a variety of "const"ifications of
902 lots of the code, especially "_cmp" operations which should normally
903 be prototyped with "const" parameters anyway.
906 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
907 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
908 (The PRNG state consists of two parts, the large pool 'state' and 'md',
909 where all of 'md' is used each time the PRNG is used, but 'state'
910 is used only indexed by a cyclic counter. As entropy may not be
911 well distributed from the beginning, 'md' is important as a
912 chaining variable. However, the output function chains only half
913 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
914 all of 'md', and seeding with STATE_SIZE dummy bytes will result
915 in all of 'state' being rewritten, with the new values depending
916 on virtually all of 'md'. This overcomes the 80 bit limitation.)
919 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
920 the handshake is continued after ssl_verify_cert_chain();
921 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
922 can lead to 'unexplainable' connection aborts later.
923 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
925 *) Major EVP API cipher revision.
926 Add hooks for extra EVP features. This allows various cipher
927 parameters to be set in the EVP interface. Support added for variable
928 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
929 setting of RC2 and RC5 parameters.
931 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
934 Remove lots of duplicated code from the EVP library. For example *every*
935 cipher init() function handles the 'iv' in the same way according to the
936 cipher mode. They also all do nothing if the 'key' parameter is NULL and
937 for CFB and OFB modes they zero ctx->num.
939 New functionality allows removal of S/MIME code RC2 hack.
941 Most of the routines have the same form and so can be declared in terms
944 By shifting this to the top level EVP_CipherInit() it can be removed from
945 all individual ciphers. If the cipher wants to handle IVs or keys
946 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
949 Change lots of functions like EVP_EncryptUpdate() to now return a
950 value: although software versions of the algorithms cannot fail
951 any installed hardware versions can.
954 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
955 this option is set, tolerate broken clients that send the negotiated
956 protocol version number instead of the requested protocol version
960 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
961 i.e. non-zero for export ciphersuites, zero otherwise.
962 Previous versions had this flag inverted, inconsistent with
963 rsa_tmp_cb (..._TMP_RSA_CB).
964 [Bodo Moeller; problem reported by Amit Chopra]
966 *) Add missing DSA library text string. Work around for some IIS
967 key files with invalid SEQUENCE encoding.
970 *) Add a document (doc/standards.txt) that list all kinds of standards
971 and so on that are implemented in OpenSSL.
974 *) Enhance c_rehash script. Old version would mishandle certificates
975 with the same subject name hash and wouldn't handle CRLs at all.
976 Added -fingerprint option to crl utility, to support new c_rehash
980 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
983 *) Fix for SSL server purpose checking. Server checking was
984 rejecting certificates which had extended key usage present
985 but no ssl client purpose.
986 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
988 *) Make PKCS#12 code work with no password. The PKCS#12 spec
989 is a little unclear about how a blank password is handled.
990 Since the password in encoded as a BMPString with terminating
991 double NULL a zero length password would end up as just the
992 double NULL. However no password at all is different and is
993 handled differently in the PKCS#12 key generation code. NS
994 treats a blank password as zero length. MSIE treats it as no
995 password on export: but it will try both on import. We now do
996 the same: PKCS12_parse() tries zero length and no password if
997 the password is set to "" or NULL (NULL is now a valid password:
998 it wasn't before) as does the pkcs12 application.
1001 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
1002 perror when PEM_read_bio_X509_REQ fails, the error message must
1003 be obtained from the error queue.
1006 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
1007 it in ERR_remove_state if appropriate, and change ERR_get_state
1008 accordingly to avoid race conditions (this is necessary because
1009 thread_hash is no longer constant once set).
1012 *) Bugfix for linux-elf makefile.one.
1015 *) RSA_get_default_method() will now cause a default
1016 RSA_METHOD to be chosen if one doesn't exist already.
1017 Previously this was only set during a call to RSA_new()
1018 or RSA_new_method(NULL) meaning it was possible for
1019 RSA_get_default_method() to return NULL.
1022 *) Added native name translation to the existing DSO code
1023 that will convert (if the flag to do so is set) filenames
1024 that are sufficiently small and have no path information
1025 into a canonical native form. Eg. "blah" converted to
1026 "libblah.so" or "blah.dll" etc.
1029 *) New function ERR_error_string_n(e, buf, len) which is like
1030 ERR_error_string(e, buf), but writes at most 'len' bytes
1031 including the 0 terminator. For ERR_error_string_n, 'buf'
1033 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
1035 *) CONF library reworked to become more general. A new CONF
1036 configuration file reader "class" is implemented as well as a
1037 new functions (NCONF_*, for "New CONF") to handle it. The now
1038 old CONF_* functions are still there, but are reimplemented to
1039 work in terms of the new functions. Also, a set of functions
1040 to handle the internal storage of the configuration data is
1041 provided to make it easier to write new configuration file
1042 reader "classes" (I can definitely see something reading a
1043 configuration file in XML format, for example), called _CONF_*,
1044 or "the configuration storage API"...
1046 The new configuration file reading functions are:
1048 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
1049 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
1051 NCONF_default, NCONF_WIN32
1053 NCONF_dump_fp, NCONF_dump_bio
1055 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
1056 NCONF_new creates a new CONF object. This works in the same way
1057 as other interfaces in OpenSSL, like the BIO interface.
1058 NCONF_dump_* dump the internal storage of the configuration file,
1059 which is useful for debugging. All other functions take the same
1060 arguments as the old CONF_* functions wth the exception of the
1061 first that must be a `CONF *' instead of a `LHASH *'.
1063 To make it easer to use the new classes with the old CONF_* functions,
1064 the function CONF_set_default_method is provided.
1067 *) Add '-tls1' option to 'openssl ciphers', which was already
1068 mentioned in the documentation but had not been implemented.
1069 (This option is not yet really useful because even the additional
1070 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
1073 *) Initial DSO code added into libcrypto for letting OpenSSL (and
1074 OpenSSL-based applications) load shared libraries and bind to
1075 them in a portable way.
1076 [Geoff Thorpe, with contributions from Richard Levitte]
1078 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
1080 *) Make sure _lrotl and _lrotr are only used with MSVC.
1082 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
1083 (the default implementation of RAND_status).
1085 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
1086 to '-clrext' (= clear extensions), as intended and documented.
1087 [Bodo Moeller; inconsistency pointed out by Michael Attili
1090 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
1091 was larger than the MD block size.
1092 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
1094 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
1095 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
1096 using the passed key: if the passed key was a private key the result
1097 of X509_print(), for example, would be to print out all the private key
1101 *) des_quad_cksum() byte order bug fix.
1102 [Ulf Möller, using the problem description in krb4-0.9.7, where
1103 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
1105 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
1107 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
1109 *) For easily testing in shell scripts whether some command
1110 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
1111 returns with exit code 0 iff no command of the given name is available.
1112 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
1113 the output goes to stdout and nothing is printed to stderr.
1114 Additional arguments are always ignored.
1116 Since for each cipher there is a command of the same name,
1117 the 'no-cipher' compilation switches can be tested this way.
1119 ('openssl no-XXX' is not able to detect pseudo-commands such
1120 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
1123 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
1126 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
1127 is set; it will be thrown away anyway because each handshake creates
1129 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
1130 to parameters -- in previous versions (since OpenSSL 0.9.3) the
1131 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
1132 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
1135 *) New s_client option -ign_eof: EOF at stdin is ignored, and
1136 'Q' and 'R' lose their special meanings (quit/renegotiate).
1137 This is part of what -quiet does; unlike -quiet, -ign_eof
1138 does not suppress any output.
1141 *) Add compatibility options to the purpose and trust code. The
1142 purpose X509_PURPOSE_ANY is "any purpose" which automatically
1143 accepts a certificate or CA, this was the previous behaviour,
1144 with all the associated security issues.
1146 X509_TRUST_COMPAT is the old trust behaviour: only and
1147 automatically trust self signed roots in certificate store. A
1148 new trust setting X509_TRUST_DEFAULT is used to specify that
1149 a purpose has no associated trust setting and it should instead
1150 use the value in the default purpose.
1153 *) Fix the PKCS#8 DSA private key code so it decodes keys again
1154 and fix a memory leak.
1157 *) In util/mkerr.pl (which implements 'make errors'), preserve
1158 reason strings from the previous version of the .c file, as
1159 the default to have only downcase letters (and digits) in
1160 automatically generated reasons codes is not always appropriate.
1163 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
1164 using strerror. Previously, ERR_reason_error_string() returned
1165 library names as reason strings for SYSerr; but SYSerr is a special
1166 case where small numbers are errno values, not library numbers.
1169 *) Add '-dsaparam' option to 'openssl dhparam' application. This
1170 converts DSA parameters into DH parameters. (When creating parameters,
1171 DSA_generate_parameters is used.)
1174 *) Include 'length' (recommended exponent length) in C code generated
1175 by 'openssl dhparam -C'.
1178 *) The second argument to set_label in perlasm was already being used
1179 so couldn't be used as a "file scope" flag. Moved to third argument
1183 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
1184 instead of RAND_bytes for encryption IVs and salts.
1187 *) Include RAND_status() into RAND_METHOD instead of implementing
1188 it only for md_rand.c Otherwise replacing the PRNG by calling
1189 RAND_set_rand_method would be impossible.
1192 *) Don't let DSA_generate_key() enter an infinite loop if the random
1193 number generation fails.
1196 *) New 'rand' application for creating pseudo-random output.
1199 *) Added configuration support for Linux/IA64
1200 [Rolf Haberrecker <rolf@suse.de>]
1202 *) Assembler module support for Mingw32.
1205 *) Shared library support for HPUX (in shlib/).
1206 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
1208 *) Shared library support for Solaris gcc.
1209 [Lutz Behnke <behnke@trustcenter.de>]
1211 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
1213 *) PKCS7_encrypt() was adding text MIME headers twice because they
1214 were added manually and by SMIME_crlf_copy().
1217 *) In bntest.c don't call BN_rand with zero bits argument.
1218 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
1220 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
1221 case was implemented. This caused BN_div_recp() to fail occasionally.
1224 *) Add an optional second argument to the set_label() in the perl
1225 assembly language builder. If this argument exists and is set
1226 to 1 it signals that the assembler should use a symbol whose
1227 scope is the entire file, not just the current function. This
1228 is needed with MASM which uses the format label:: for this scope.
1229 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
1231 *) Change the ASN1 types so they are typedefs by default. Before
1232 almost all types were #define'd to ASN1_STRING which was causing
1233 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
1237 *) Change names of new functions to the new get1/get0 naming
1238 convention: After 'get1', the caller owns a reference count
1239 and has to call ..._free; 'get0' returns a pointer to some
1240 data structure without incrementing reference counters.
1241 (Some of the existing 'get' functions increment a reference
1242 counter, some don't.)
1243 Similarly, 'set1' and 'add1' functions increase reference
1244 counters or duplicate objects.
1247 *) Allow for the possibility of temp RSA key generation failure:
1248 the code used to assume it always worked and crashed on failure.
1251 *) Fix potential buffer overrun problem in BIO_printf().
1252 [Ulf Möller, using public domain code by Patrick Powell; problem
1253 pointed out by David Sacerdote <das33@cornell.edu>]
1255 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
1256 RAND_egd() and RAND_status(). In the command line application,
1257 the EGD socket can be specified like a seed file using RANDFILE
1261 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
1262 Some CAs (e.g. Verisign) distribute certificates in this form.
1265 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
1266 list to exclude them. This means that no special compilation option
1267 is needed to use anonymous DH: it just needs to be included in the
1271 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
1272 EVP_MD_type. The old functionality is available in a new macro called
1273 EVP_MD_md(). Change code that uses it and update docs.
1276 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
1277 where the 'void *' argument is replaced by a function pointer argument.
1278 Previously 'void *' was abused to point to functions, which works on
1279 many platforms, but is not correct. As these functions are usually
1280 called by macros defined in OpenSSL header files, most source code
1281 should work without changes.
1284 *) <openssl/opensslconf.h> (which is created by Configure) now contains
1285 sections with information on -D... compiler switches used for
1286 compiling the library so that applications can see them. To enable
1287 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
1288 must be defined. E.g.,
1289 #define OPENSSL_ALGORITHM_DEFINES
1290 #include <openssl/opensslconf.h>
1291 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
1292 [Richard Levitte, Ulf and Bodo Möller]
1294 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
1298 *) Change the 'other' type in certificate aux info to a STACK_OF
1299 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
1300 the required ASN1 format: arbitrary types determined by an OID.
1303 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
1304 argument to 'req'. This is not because the function is newer or
1305 better than others it just uses the work 'NEW' in the certificate
1306 request header lines. Some software needs this.
1309 *) Reorganise password command line arguments: now passwords can be
1310 obtained from various sources. Delete the PEM_cb function and make
1311 it the default behaviour: i.e. if the callback is NULL and the
1312 usrdata argument is not NULL interpret it as a null terminated pass
1313 phrase. If usrdata and the callback are NULL then the pass phrase
1314 is prompted for as usual.
1317 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
1318 the support is automatically enabled. The resulting binaries will
1319 autodetect the card and use it if present.
1320 [Ben Laurie and Compaq Inc.]
1322 *) Work around for Netscape hang bug. This sends certificate request
1323 and server done in one record. Since this is perfectly legal in the
1324 SSL/TLS protocol it isn't a "bug" option and is on by default. See
1325 the bugs/SSLv3 entry for more info.
1328 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
1331 *) Add -rand argument to smime and pkcs12 applications and read/write
1335 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
1338 *) Add command line password options to the remaining applications.
1341 *) Bug fix for BN_div_recp() for numerators with an even number of
1345 *) More tests in bntest.c, and changed test_bn output.
1348 *) ./config recognizes MacOS X now.
1351 *) Bug fix for BN_div() when the first words of num and divsor are
1352 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
1355 *) Add support for various broken PKCS#8 formats, and command line
1356 options to produce them.
1359 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
1360 get temporary BIGNUMs from a BN_CTX.
1363 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
1367 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
1368 include a #define from the old name to the new. The original intent
1369 was that statically linked binaries could for example just call
1370 SSLeay_add_all_ciphers() to just add ciphers to the table and not
1371 link with digests. This never worked becayse SSLeay_add_all_digests()
1372 and SSLeay_add_all_ciphers() were in the same source file so calling
1373 one would link with the other. They are now in separate source files.
1376 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
1379 *) Use a less unusual form of the Miller-Rabin primality test (it used
1380 a binary algorithm for exponentiation integrated into the Miller-Rabin
1381 loop, our standard modexp algorithms are faster).
1384 *) Support for the EBCDIC character set completed.
1385 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
1387 *) Source code cleanups: use const where appropriate, eliminate casts,
1388 use void * instead of char * in lhash.
1391 *) Bugfix: ssl3_send_server_key_exchange was not restartable
1392 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
1393 this the server could overwrite ephemeral keys that the client
1397 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
1398 using 50 iterations of the Rabin-Miller test.
1400 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
1401 iterations of the Rabin-Miller test as required by the appendix
1402 to FIPS PUB 186[-1]) instead of DSA_is_prime.
1403 As BN_is_prime_fasttest includes trial division, DSA parameter
1404 generation becomes much faster.
1406 This implies a change for the callback functions in DSA_is_prime
1407 and DSA_generate_parameters: The callback function is called once
1408 for each positive witness in the Rabin-Miller test, not just
1409 occasionally in the inner loop; and the parameters to the
1410 callback function now provide an iteration count for the outer
1411 loop rather than for the current invocation of the inner loop.
1412 DSA_generate_parameters additionally can call the callback
1413 function with an 'iteration count' of -1, meaning that a
1414 candidate has passed the trial division test (when q is generated
1415 from an application-provided seed, trial division is skipped).
1418 *) New function BN_is_prime_fasttest that optionally does trial
1419 division before starting the Rabin-Miller test and has
1420 an additional BN_CTX * argument (whereas BN_is_prime always
1421 has to allocate at least one BN_CTX).
1422 'callback(1, -1, cb_arg)' is called when a number has passed the
1423 trial division stage.
1426 *) Fix for bug in CRL encoding. The validity dates weren't being handled
1430 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
1433 *) New function BN_pseudo_rand().
1436 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
1437 bignum version of BN_from_montgomery() with the working code from
1438 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
1442 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
1443 made it impossible to use the same SSL_SESSION data structure in
1444 SSL2 clients in multiple threads.
1447 *) The return value of RAND_load_file() no longer counts bytes obtained
1448 by stat(). RAND_load_file(..., -1) is new and uses the complete file
1449 to seed the PRNG (previously an explicit byte count was required).
1450 [Ulf Möller, Bodo Möller]
1452 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
1453 used (char *) instead of (void *) and had casts all over the place.
1456 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
1459 *) Retain source code compatibility for BN_prime_checks macro:
1460 BN_is_prime(..., BN_prime_checks, ...) now uses
1461 BN_prime_checks_for_size to determine the appropriate number of
1462 Rabin-Miller iterations.
1465 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
1466 DH_CHECK_P_NOT_SAFE_PRIME.
1467 (Check if this is true? OpenPGP calls them "strong".)
1470 *) Merge the functionality of "dh" and "gendh" programs into a new program
1471 "dhparam". The old programs are retained for now but will handle DH keys
1472 (instead of parameters) in future.
1475 *) Make the ciphers, s_server and s_client programs check the return values
1476 when a new cipher list is set.
1479 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
1480 ciphers. Before when the 56bit ciphers were enabled the sorting was
1483 The syntax for the cipher sorting has been extended to support sorting by
1484 cipher-strength (using the strength_bits hard coded in the tables).
1485 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
1487 Fix a bug in the cipher-command parser: when supplying a cipher command
1488 string with an "undefined" symbol (neither command nor alphanumeric
1489 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
1490 an error is flagged.
1492 Due to the strength-sorting extension, the code of the
1493 ssl_create_cipher_list() function was completely rearranged. I hope that
1494 the readability was also increased :-)
1495 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
1497 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
1498 for the first serial number and places 2 in the serial number file. This
1499 avoids problems when the root CA is created with serial number zero and
1500 the first user certificate has the same issuer name and serial number
1504 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
1505 the new code. Add documentation for this stuff.
1508 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
1509 X509_*() to X509at_*() on the grounds that they don't handle X509
1510 structures and behave in an analagous way to the X509v3 functions:
1511 they shouldn't be called directly but wrapper functions should be used
1514 So we also now have some wrapper functions that call the X509at functions
1515 when passed certificate requests. (TO DO: similar things can be done with
1516 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
1517 things. Some of these need some d2i or i2d and print functionality
1518 because they handle more complex structures.)
1521 *) Add missing #ifndefs that caused missing symbols when building libssl
1522 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
1523 NO_RSA in ssl/s2*.c.
1524 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
1526 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
1527 has a return value which indicates the quality of the random data
1528 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
1529 error queue. New function RAND_pseudo_bytes() generates output that is
1530 guaranteed to be unique but not unpredictable. RAND_add is like
1531 RAND_seed, but takes an extra argument for an entropy estimate
1532 (RAND_seed always assumes full entropy).
1535 *) Do more iterations of Rabin-Miller probable prime test (specifically,
1536 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
1537 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
1538 in crypto/bn/bn_prime.c for the complete table). This guarantees a
1539 false-positive rate of at most 2^-80 for random input.
1542 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
1545 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
1546 in the 0.9.5 release), this returns the chain
1547 from an X509_CTX structure with a dup of the stack and all
1548 the X509 reference counts upped: so the stack will exist
1549 after X509_CTX_cleanup() has been called. Modify pkcs12.c
1552 Also make SSL_SESSION_print() print out the verify return
1556 *) Add manpage for the pkcs12 command. Also change the default
1557 behaviour so MAC iteration counts are used unless the new
1558 -nomaciter option is used. This improves file security and
1559 only older versions of MSIE (4.0 for example) need it.
1562 *) Honor the no-xxx Configure options when creating .DEF files.
1565 *) Add PKCS#10 attributes to field table: challengePassword,
1566 unstructuredName and unstructuredAddress. These are taken from
1567 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
1568 international characters are used.
1570 More changes to X509_ATTRIBUTE code: allow the setting of types
1571 based on strings. Remove the 'loc' parameter when adding
1572 attributes because these will be a SET OF encoding which is sorted
1576 *) Initial changes to the 'req' utility to allow request generation
1577 automation. This will allow an application to just generate a template
1578 file containing all the field values and have req construct the
1581 Initial support for X509_ATTRIBUTE handling. Stacks of these are
1582 used all over the place including certificate requests and PKCS#7
1583 structures. They are currently handled manually where necessary with
1584 some primitive wrappers for PKCS#7. The new functions behave in a
1585 manner analogous to the X509 extension functions: they allow
1586 attributes to be looked up by NID and added.
1588 Later something similar to the X509V3 code would be desirable to
1589 automatically handle the encoding, decoding and printing of the
1590 more complex types. The string types like challengePassword can
1591 be handled by the string table functions.
1593 Also modified the multi byte string table handling. Now there is
1594 a 'global mask' which masks out certain types. The table itself
1595 can use the flag STABLE_NO_MASK to ignore the mask setting: this
1596 is useful when for example there is only one permissible type
1597 (as in countryName) and using the mask might result in no valid
1601 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
1602 SSL_get_peer_finished to allow applications to obtain the latest
1603 Finished messages sent to the peer or expected from the peer,
1604 respectively. (SSL_get_peer_finished is usually the Finished message
1605 actually received from the peer, otherwise the protocol will be aborted.)
1607 As the Finished message are message digests of the complete handshake
1608 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
1609 be used for external authentication procedures when the authentication
1610 provided by SSL/TLS is not desired or is not enough.
1613 *) Enhanced support for Alpha Linux is added. Now ./config checks if
1614 the host supports BWX extension and if Compaq C is present on the
1615 $PATH. Just exploiting of the BWX extension results in 20-30%
1616 performance kick for some algorithms, e.g. DES and RC4 to mention
1617 a couple. Compaq C in turn generates ~20% faster code for MD5 and
1621 *) Add support for MS "fast SGC". This is arguably a violation of the
1622 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
1623 weak crypto and after checking the certificate is SGC a second one
1624 with strong crypto. MS SGC stops the first handshake after receiving
1625 the server certificate message and sends a second client hello. Since
1626 a server will typically do all the time consuming operations before
1627 expecting any further messages from the client (server key exchange
1628 is the most expensive) there is little difference between the two.
1630 To get OpenSSL to support MS SGC we have to permit a second client
1631 hello message after we have sent server done. In addition we have to
1632 reset the MAC if we do get this second client hello.
1635 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
1636 if a DER encoded private key is RSA or DSA traditional format. Changed
1637 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
1638 format DER encoded private key. Newer code should use PKCS#8 format which
1639 has the key type encoded in the ASN1 structure. Added DER private key
1640 support to pkcs8 application.
1643 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
1644 ciphersuites has been selected (as required by the SSL 3/TLS 1
1645 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
1646 is set, we interpret this as a request to violate the specification
1647 (the worst that can happen is a handshake failure, and 'correct'
1648 behaviour would result in a handshake failure anyway).
1651 *) In SSL_CTX_add_session, take into account that there might be multiple
1652 SSL_SESSION structures with the same session ID (e.g. when two threads
1653 concurrently obtain them from an external cache).
1654 The internal cache can handle only one SSL_SESSION with a given ID,
1655 so if there's a conflict, we now throw out the old one to achieve
1659 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
1660 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
1661 some routines that use cipher OIDs: some ciphers do not have OIDs
1662 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
1666 *) Simplify the trust setting structure and code. Now we just have
1667 two sequences of OIDs for trusted and rejected settings. These will
1668 typically have values the same as the extended key usage extension
1669 and any application specific purposes.
1671 The trust checking code now has a default behaviour: it will just
1672 check for an object with the same NID as the passed id. Functions can
1673 be provided to override either the default behaviour or the behaviour
1674 for a given id. SSL client, server and email already have functions
1675 in place for compatibility: they check the NID and also return "trusted"
1676 if the certificate is self signed.
1679 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
1680 traditional format into an EVP_PKEY structure.
1683 *) Add a password callback function PEM_cb() which either prompts for
1684 a password if usr_data is NULL or otherwise assumes it is a null
1685 terminated password. Allow passwords to be passed on command line
1686 environment or config files in a few more utilities.
1689 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
1690 keys. Add some short names for PKCS#8 PBE algorithms and allow them
1691 to be specified on the command line for the pkcs8 and pkcs12 utilities.
1692 Update documentation.
1695 *) Support for ASN1 "NULL" type. This could be handled before by using
1696 ASN1_TYPE but there wasn't any function that would try to read a NULL
1697 and produce an error if it couldn't. For compatibility we also have
1698 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
1699 don't allocate anything because they don't need to.
1702 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
1704 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
1706 *) Rebuild of the memory allocation routines used by OpenSSL code and
1707 possibly others as well. The purpose is to make an interface that
1708 provide hooks so anyone can build a separate set of allocation and
1709 deallocation routines to be used by OpenSSL, for example memory
1710 pool implementations, or something else, which was previously hard
1711 since Malloc(), Realloc() and Free() were defined as macros having
1712 the values malloc, realloc and free, respectively (except for Win32
1713 compilations). The same is provided for memory debugging code.
1714 OpenSSL already comes with functionality to find memory leaks, but
1715 this gives people a chance to debug other memory problems.
1717 With these changes, a new set of functions and macros have appeared:
1719 CRYPTO_set_mem_debug_functions() [F]
1720 CRYPTO_get_mem_debug_functions() [F]
1721 CRYPTO_dbg_set_options() [F]
1722 CRYPTO_dbg_get_options() [F]
1723 CRYPTO_malloc_debug_init() [M]
1725 The memory debug functions are NULL by default, unless the library
1726 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
1727 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
1728 gives the standard debugging functions that come with OpenSSL) or
1729 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
1730 provided by the library user) must be used. When the standard
1731 debugging functions are used, CRYPTO_dbg_set_options can be used to
1732 request additional information:
1733 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
1734 the CRYPTO_MDEBUG_xxx macro when compiling the library.
1736 Also, things like CRYPTO_set_mem_functions will always give the
1737 expected result (the new set of functions is used for allocation
1738 and deallocation) at all times, regardless of platform and compiler
1741 To finish it up, some functions that were never use in any other
1742 way than through macros have a new API and new semantic:
1745 CRYPTO_dbg_realloc()
1748 All macros of value have retained their old syntax.
1749 [Richard Levitte and Bodo Moeller]
1751 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
1752 ordering of SMIMECapabilities wasn't in "strength order" and there
1753 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
1757 *) Some ASN1 types with illegal zero length encoding (INTEGER,
1758 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
1759 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
1761 *) Merge in my S/MIME library for OpenSSL. This provides a simple
1762 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
1763 functionality to handle multipart/signed properly) and a utility
1764 called 'smime' to call all this stuff. This is based on code I
1765 originally wrote for Celo who have kindly allowed it to be
1766 included in OpenSSL.
1769 *) Add variants des_set_key_checked and des_set_key_unchecked of
1770 des_set_key (aka des_key_sched). Global variable des_check_key
1771 decides which of these is called by des_set_key; this way
1772 des_check_key behaves as it always did, but applications and
1773 the library itself, which was buggy for des_check_key == 1,
1774 have a cleaner way to pick the version they need.
1777 *) New function PKCS12_newpass() which changes the password of a
1781 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
1782 dynamic mix. In both cases the ids can be used as an index into the
1783 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
1784 functions so they accept a list of the field values and the
1785 application doesn't need to directly manipulate the X509_TRUST
1789 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
1793 *) Modify the way the V3 extension code looks up extensions. This now
1794 works in a similar way to the object code: we have some "standard"
1795 extensions in a static table which is searched with OBJ_bsearch()
1796 and the application can add dynamic ones if needed. The file
1797 crypto/x509v3/ext_dat.h now has the info: this file needs to be
1798 updated whenever a new extension is added to the core code and kept
1799 in ext_nid order. There is a simple program 'tabtest.c' which checks
1800 this. New extensions are not added too often so this file can readily
1801 be maintained manually.
1803 There are two big advantages in doing things this way. The extensions
1804 can be looked up immediately and no longer need to be "added" using
1805 X509V3_add_standard_extensions(): this function now does nothing.
1806 [Side note: I get *lots* of email saying the extension code doesn't
1807 work because people forget to call this function]
1808 Also no dynamic allocation is done unless new extensions are added:
1809 so if we don't add custom extensions there is no need to call
1810 X509V3_EXT_cleanup().
1813 *) Modify enc utility's salting as follows: make salting the default. Add a
1814 magic header, so unsalted files fail gracefully instead of just decrypting
1815 to garbage. This is because not salting is a big security hole, so people
1816 should be discouraged from doing it.
1819 *) Fixes and enhancements to the 'x509' utility. It allowed a message
1820 digest to be passed on the command line but it only used this
1821 parameter when signing a certificate. Modified so all relevant
1822 operations are affected by the digest parameter including the
1823 -fingerprint and -x509toreq options. Also -x509toreq choked if a
1824 DSA key was used because it didn't fix the digest.
1827 *) Initial certificate chain verify code. Currently tests the untrusted
1828 certificates for consistency with the verify purpose (which is set
1829 when the X509_STORE_CTX structure is set up) and checks the pathlength.
1831 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
1832 this is because it will reject chains with invalid extensions whereas
1833 every previous version of OpenSSL and SSLeay made no checks at all.
1835 Trust code: checks the root CA for the relevant trust settings. Trust
1836 settings have an initial value consistent with the verify purpose: e.g.
1837 if the verify purpose is for SSL client use it expects the CA to be
1838 trusted for SSL client use. However the default value can be changed to
1839 permit custom trust settings: one example of this would be to only trust
1840 certificates from a specific "secure" set of CAs.
1842 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
1843 which should be used for version portability: especially since the
1844 verify structure is likely to change more often now.
1846 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
1847 to set them. If not set then assume SSL clients will verify SSL servers
1850 Two new options to the verify program: -untrusted allows a set of
1851 untrusted certificates to be passed in and -purpose which sets the
1852 intended purpose of the certificate. If a purpose is set then the
1853 new chain verify code is used to check extension consistency.
1856 *) Support for the authority information access extension.
1859 *) Modify RSA and DSA PEM read routines to transparently handle
1860 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
1861 public keys in a format compatible with certificate
1862 SubjectPublicKeyInfo structures. Unfortunately there were already
1863 functions called *_PublicKey_* which used various odd formats so
1864 these are retained for compatibility: however the DSA variants were
1865 never in a public release so they have been deleted. Changed dsa/rsa
1866 utilities to handle the new format: note no releases ever handled public
1867 keys so we should be OK.
1869 The primary motivation for this change is to avoid the same fiasco
1870 that dogs private keys: there are several incompatible private key
1871 formats some of which are standard and some OpenSSL specific and
1872 require various evil hacks to allow partial transparent handling and
1873 even then it doesn't work with DER formats. Given the option anything
1874 other than PKCS#8 should be dumped: but the other formats have to
1875 stay in the name of compatibility.
1877 With public keys and the benefit of hindsight one standard format
1878 is used which works with EVP_PKEY, RSA or DSA structures: though
1879 it clearly returns an error if you try to read the wrong kind of key.
1881 Added a -pubkey option to the 'x509' utility to output the public key.
1882 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
1883 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
1884 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
1885 that do the same as the EVP_PKEY_assign_*() except they up the
1886 reference count of the added key (they don't "swallow" the
1890 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
1891 CRLs would fail if the file contained no certificates or no CRLs:
1892 added a new function to read in both types and return the number
1893 read: this means that if none are read it will be an error. The
1894 DER versions of the certificate and CRL reader would always fail
1895 because it isn't possible to mix certificates and CRLs in DER format
1896 without choking one or the other routine. Changed this to just read
1897 a certificate: this is the best we can do. Also modified the code
1898 in apps/verify.c to take notice of return codes: it was previously
1899 attempting to read in certificates from NULL pointers and ignoring
1900 any errors: this is one reason why the cert and CRL reader seemed
1901 to work. It doesn't check return codes from the default certificate
1902 routines: these may well fail if the certificates aren't installed.
1905 *) Code to support otherName option in GeneralName.
1908 *) First update to verify code. Change the verify utility
1909 so it warns if it is passed a self signed certificate:
1910 for consistency with the normal behaviour. X509_verify
1911 has been modified to it will now verify a self signed
1912 certificate if *exactly* the same certificate appears
1913 in the store: it was previously impossible to trust a
1914 single self signed certificate. This means that:
1915 openssl verify ss.pem
1916 now gives a warning about a self signed certificate but
1917 openssl verify -CAfile ss.pem ss.pem
1921 *) For servers, store verify_result in SSL_SESSION data structure
1922 (and add it to external session representation).
1923 This is needed when client certificate verifications fails,
1924 but an application-provided verification callback (set by
1925 SSL_CTX_set_cert_verify_callback) allows accepting the session
1926 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
1927 but returns 1): When the session is reused, we have to set
1928 ssl->verify_result to the appropriate error code to avoid
1930 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
1932 *) Fix a bug in the new PKCS#7 code: it didn't consider the
1933 case in PKCS7_dataInit() where the signed PKCS7 structure
1934 didn't contain any existing data because it was being created.
1935 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
1937 *) Add a salt to the key derivation routines in enc.c. This
1938 forms the first 8 bytes of the encrypted file. Also add a
1939 -S option to allow a salt to be input on the command line.
1942 *) New function X509_cmp(). Oddly enough there wasn't a function
1943 to compare two certificates. We do this by working out the SHA1
1944 hash and comparing that. X509_cmp() will be needed by the trust
1948 *) SSL_get1_session() is like SSL_get_session(), but increments
1949 the reference count in the SSL_SESSION returned.
1950 [Geoff Thorpe <geoff@eu.c2.net>]
1952 *) Fix for 'req': it was adding a null to request attributes.
1953 Also change the X509_LOOKUP and X509_INFO code to handle
1954 certificate auxiliary information.
1957 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
1961 *) Add the possibility to add extra information to the memory leak
1962 detecting output, to form tracebacks, showing from where each
1963 allocation was originated: CRYPTO_push_info("constant string") adds
1964 the string plus current file name and line number to a per-thread
1965 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
1966 is like calling CYRPTO_pop_info() until the stack is empty.
1967 Also updated memory leak detection code to be multi-thread-safe.
1970 *) Add options -text and -noout to pkcs7 utility and delete the
1971 encryption options which never did anything. Update docs.
1974 *) Add options to some of the utilities to allow the pass phrase
1975 to be included on either the command line (not recommended on
1976 OSes like Unix) or read from the environment. Update the
1977 manpages and fix a few bugs.
1980 *) Add a few manpages for some of the openssl commands.
1983 *) Fix the -revoke option in ca. It was freeing up memory twice,
1984 leaking and not finding already revoked certificates.
1987 *) Extensive changes to support certificate auxiliary information.
1988 This involves the use of X509_CERT_AUX structure and X509_AUX
1989 functions. An X509_AUX function such as PEM_read_X509_AUX()
1990 can still read in a certificate file in the usual way but it
1991 will also read in any additional "auxiliary information". By
1992 doing things this way a fair degree of compatibility can be
1993 retained: existing certificates can have this information added
1994 using the new 'x509' options.
1996 Current auxiliary information includes an "alias" and some trust
1997 settings. The trust settings will ultimately be used in enhanced
1998 certificate chain verification routines: currently a certificate
1999 can only be trusted if it is self signed and then it is trusted
2003 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
2004 The problem was that one of the replacement routines had not been working
2005 since SSLeay releases. For now the offending routine has been replaced
2006 with non-optimised assembler. Even so, this now gives around 95%
2007 performance improvement for 1024 bit RSA signs.
2010 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
2011 handling. Most clients have the effective key size in bits equal to
2012 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
2013 A few however don't do this and instead use the size of the decrypted key
2014 to determine the RC2 key length and the AlgorithmIdentifier to determine
2015 the effective key length. In this case the effective key length can still
2016 be 40 bits but the key length can be 168 bits for example. This is fixed
2017 by manually forcing an RC2 key into the EVP_PKEY structure because the
2018 EVP code can't currently handle unusual RC2 key sizes: it always assumes
2019 the key length and effective key length are equal.
2022 *) Add a bunch of functions that should simplify the creation of
2023 X509_NAME structures. Now you should be able to do:
2024 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
2025 and have it automatically work out the correct field type and fill in
2026 the structures. The more adventurous can try:
2027 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
2028 and it will (hopefully) work out the correct multibyte encoding.
2031 *) Change the 'req' utility to use the new field handling and multibyte
2032 copy routines. Before the DN field creation was handled in an ad hoc
2033 way in req, ca, and x509 which was rather broken and didn't support
2034 BMPStrings or UTF8Strings. Since some software doesn't implement
2035 BMPStrings or UTF8Strings yet, they can be enabled using the config file
2036 using the dirstring_type option. See the new comment in the default
2037 openssl.cnf for more info.
2040 *) Make crypto/rand/md_rand.c more robust:
2041 - Assure unique random numbers after fork().
2042 - Make sure that concurrent threads access the global counter and
2043 md serializably so that we never lose entropy in them
2044 or use exactly the same state in multiple threads.
2045 Access to the large state is not always serializable because
2046 the additional locking could be a performance killer, and
2047 md should be large enough anyway.
2050 *) New file apps/app_rand.c with commonly needed functionality
2051 for handling the random seed file.
2053 Use the random seed file in some applications that previously did not:
2055 dsaparam -genkey (which also ignored its '-rand' option),
2058 x509 (when signing).
2059 Except on systems with /dev/urandom, it is crucial to have a random
2060 seed file at least for key creation, DSA signing, and for DH exchanges;
2061 for RSA signatures we could do without one.
2063 gendh and gendsa (unlike genrsa) used to read only the first byte
2064 of each file listed in the '-rand' option. The function as previously
2065 found in genrsa is now in app_rand.c and is used by all programs
2066 that support '-rand'.
2069 *) In RAND_write_file, use mode 0600 for creating files;
2070 don't just chmod when it may be too late.
2073 *) Report an error from X509_STORE_load_locations
2074 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
2077 *) New function ASN1_mbstring_copy() this copies a string in either
2078 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
2079 into an ASN1_STRING type. A mask of permissible types is passed
2080 and it chooses the "minimal" type to use or an error if not type
2084 *) Add function equivalents to the various macros in asn1.h. The old
2085 macros are retained with an M_ prefix. Code inside the library can
2086 use the M_ macros. External code (including the openssl utility)
2087 should *NOT* in order to be "shared library friendly".
2090 *) Add various functions that can check a certificate's extensions
2091 to see if it usable for various purposes such as SSL client,
2092 server or S/MIME and CAs of these types. This is currently
2093 VERY EXPERIMENTAL but will ultimately be used for certificate chain
2094 verification. Also added a -purpose flag to x509 utility to
2095 print out all the purposes.
2098 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
2102 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
2103 for, obtain and decode and extension and obtain its critical flag.
2104 This allows all the necessary extension code to be handled in a
2105 single function call.
2108 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
2109 platforms. See crypto/rc4/rc4_enc.c for further details.
2112 *) New -noout option to asn1parse. This causes no output to be produced
2113 its main use is when combined with -strparse and -out to extract data
2114 from a file (which may not be in ASN.1 format).
2117 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
2118 when producing the local key id.
2119 [Richard Levitte <levitte@stacken.kth.se>]
2121 *) New option -dhparam in s_server. This allows a DH parameter file to be
2122 stated explicitly. If it is not stated then it tries the first server
2123 certificate file. The previous behaviour hard coded the filename
2127 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
2128 a public key to be input or output. For example:
2129 openssl rsa -in key.pem -pubout -out pubkey.pem
2130 Also added necessary DSA public key functions to handle this.
2133 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
2134 in the message. This was handled by allowing
2135 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
2136 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
2138 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
2139 to the end of the strings whereas this didn't. This would cause problems
2140 if strings read with d2i_ASN1_bytes() were later modified.
2141 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
2143 *) Fix for base64 decode bug. When a base64 bio reads only one line of
2144 data and it contains EOF it will end up returning an error. This is
2145 caused by input 46 bytes long. The cause is due to the way base64
2146 BIOs find the start of base64 encoded data. They do this by trying a
2147 trial decode on each line until they find one that works. When they
2148 do a flag is set and it starts again knowing it can pass all the
2149 data directly through the decoder. Unfortunately it doesn't reset
2150 the context it uses. This means that if EOF is reached an attempt
2151 is made to pass two EOFs through the context and this causes the
2152 resulting error. This can also cause other problems as well. As is
2153 usual with these problems it takes *ages* to find and the fix is
2154 trivial: move one line.
2155 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
2157 *) Ugly workaround to get s_client and s_server working under Windows. The
2158 old code wouldn't work because it needed to select() on sockets and the
2159 tty (for keypresses and to see if data could be written). Win32 only
2160 supports select() on sockets so we select() with a 1s timeout on the
2161 sockets and then see if any characters are waiting to be read, if none
2162 are present then we retry, we also assume we can always write data to
2163 the tty. This isn't nice because the code then blocks until we've
2164 received a complete line of data and it is effectively polling the
2165 keyboard at 1s intervals: however it's quite a bit better than not
2166 working at all :-) A dedicated Windows application might handle this
2167 with an event loop for example.
2170 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
2171 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
2172 will be called when RSA_sign() and RSA_verify() are used. This is useful
2173 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
2174 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
2175 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
2176 This necessitated the support of an extra signature type NID_md5_sha1
2177 for SSL signatures and modifications to the SSL library to use it instead
2178 of calling RSA_public_decrypt() and RSA_private_encrypt().
2181 *) Add new -verify -CAfile and -CApath options to the crl program, these
2182 will lookup a CRL issuers certificate and verify the signature in a
2183 similar way to the verify program. Tidy up the crl program so it
2184 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
2185 less strict. It will now permit CRL extensions even if it is not
2186 a V2 CRL: this will allow it to tolerate some broken CRLs.
2189 *) Initialize all non-automatic variables each time one of the openssl
2190 sub-programs is started (this is necessary as they may be started
2191 multiple times from the "OpenSSL>" prompt).
2192 [Lennart Bang, Bodo Moeller]
2194 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
2195 removing all other RSA functionality (this is what NO_RSA does). This
2196 is so (for example) those in the US can disable those operations covered
2197 by the RSA patent while allowing storage and parsing of RSA keys and RSA
2201 *) Non-copying interface to BIO pairs.
2202 (still largely untested)
2205 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
2206 ASCII string. This was handled independently in various places before.
2209 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
2210 UTF8 strings a character at a time.
2213 *) Use client_version from client hello to select the protocol
2214 (s23_srvr.c) and for RSA client key exchange verification
2215 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
2218 *) Add various utility functions to handle SPKACs, these were previously
2219 handled by poking round in the structure internals. Added new function
2220 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
2221 print, verify and generate SPKACs. Based on an original idea from
2222 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
2225 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
2228 *) Allow the config file extension section to be overwritten on the
2229 command line. Based on an original idea from Massimiliano Pala
2230 <madwolf@comune.modena.it>. The new option is called -extensions
2231 and can be applied to ca, req and x509. Also -reqexts to override
2232 the request extensions in req and -crlexts to override the crl extensions
2236 *) Add new feature to the SPKAC handling in ca. Now you can include
2237 the same field multiple times by preceding it by "XXXX." for example:
2240 this is the same syntax as used in the req config file.
2243 *) Allow certificate extensions to be added to certificate requests. These
2244 are specified in a 'req_extensions' option of the req section of the
2245 config file. They can be printed out with the -text option to req but
2246 are otherwise ignored at present.
2249 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
2250 data read consists of only the final block it would not decrypted because
2251 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
2252 A misplaced 'break' also meant the decrypted final block might not be
2253 copied until the next read.
2256 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
2257 a few extra parameters to the DH structure: these will be useful if
2258 for example we want the value of 'q' or implement X9.42 DH.
2261 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
2262 provides hooks that allow the default DSA functions or functions on a
2263 "per key" basis to be replaced. This allows hardware acceleration and
2264 hardware key storage to be handled without major modification to the
2265 library. Also added low level modexp hooks and CRYPTO_EX structure and
2266 associated functions.
2269 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
2270 as "read only": it can't be written to and the buffer it points to will
2271 not be freed. Reading from a read only BIO is much more efficient than
2272 a normal memory BIO. This was added because there are several times when
2273 an area of memory needs to be read from a BIO. The previous method was
2274 to create a memory BIO and write the data to it, this results in two
2275 copies of the data and an O(n^2) reading algorithm. There is a new
2276 function BIO_new_mem_buf() which creates a read only memory BIO from
2277 an area of memory. Also modified the PKCS#7 routines to use read only
2281 *) Bugfix: ssl23_get_client_hello did not work properly when called in
2282 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
2283 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
2284 but a retry condition occured while trying to read the rest.
2287 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
2288 NID_pkcs7_encrypted by default: this was wrong since this should almost
2289 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
2290 the encrypted data type: this is a more sensible place to put it and it
2291 allows the PKCS#12 code to be tidied up that duplicated this
2295 *) Changed obj_dat.pl script so it takes its input and output files on
2296 the command line. This should avoid shell escape redirection problems
2300 *) Initial support for certificate extension requests, these are included
2301 in things like Xenroll certificate requests. Included functions to allow
2302 extensions to be obtained and added.
2305 *) -crlf option to s_client and s_server for sending newlines as
2306 CRLF (as required by many protocols).
2309 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
2311 *) Install libRSAglue.a when OpenSSL is built with RSAref.
2312 [Ralf S. Engelschall]
2314 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
2315 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
2317 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
2321 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
2322 DH parameters/keys (q is lost during that conversion, but the resulting
2323 DH parameters contain its length).
2325 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
2326 much faster than DH_generate_parameters (which creates parameters
2327 where p = 2*q + 1), and also the smaller q makes DH computations
2328 much more efficient (160-bit exponentiation instead of 1024-bit
2329 exponentiation); so this provides a convenient way to support DHE
2330 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
2331 utter importance to use
2332 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
2334 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
2335 when such DH parameters are used, because otherwise small subgroup
2336 attacks may become possible!
2339 *) Avoid memory leak in i2d_DHparams.
2342 *) Allow the -k option to be used more than once in the enc program:
2343 this allows the same encrypted message to be read by multiple recipients.
2346 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
2347 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
2348 it will always use the numerical form of the OID, even if it has a short
2352 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
2353 method only got called if p,q,dmp1,dmq1,iqmp components were present,
2354 otherwise bn_mod_exp was called. In the case of hardware keys for example
2355 no private key components need be present and it might store extra data
2356 in the RSA structure, which cannot be accessed from bn_mod_exp.
2357 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
2358 private key operations.
2361 *) Added support for SPARC Linux.
2364 *) pem_password_cb function type incompatibly changed from
2365 typedef int pem_password_cb(char *buf, int size, int rwflag);
2367 ....(char *buf, int size, int rwflag, void *userdata);
2368 so that applications can pass data to their callbacks:
2369 The PEM[_ASN1]_{read,write}... functions and macros now take an
2370 additional void * argument, which is just handed through whenever
2371 the password callback is called.
2372 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
2374 New function SSL_CTX_set_default_passwd_cb_userdata.
2376 Compatibility note: As many C implementations push function arguments
2377 onto the stack in reverse order, the new library version is likely to
2378 interoperate with programs that have been compiled with the old
2379 pem_password_cb definition (PEM_whatever takes some data that
2380 happens to be on the stack as its last argument, and the callback
2381 just ignores this garbage); but there is no guarantee whatsoever that
2384 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
2385 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
2386 problems not only on Windows, but also on some Unix platforms.
2387 To avoid problematic command lines, these definitions are now in an
2388 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
2389 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
2392 *) MIPS III/IV assembler module is reimplemented.
2395 *) More DES library cleanups: remove references to srand/rand and
2396 delete an unused file.
2399 *) Add support for the the free Netwide assembler (NASM) under Win32,
2400 since not many people have MASM (ml) and it can be hard to obtain.
2401 This is currently experimental but it seems to work OK and pass all
2402 the tests. Check out INSTALL.W32 for info.
2405 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
2406 without temporary keys kept an extra copy of the server key,
2407 and connections with temporary keys did not free everything in case
2411 *) New function RSA_check_key and new openssl rsa option -check
2412 for verifying the consistency of RSA keys.
2413 [Ulf Moeller, Bodo Moeller]
2415 *) Various changes to make Win32 compile work:
2416 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
2417 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
2418 comparison" warnings.
2419 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
2422 *) Add a debugging option to PKCS#5 v2 key generation function: when
2423 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
2424 derived keys are printed to stderr.
2427 *) Copy the flags in ASN1_STRING_dup().
2428 [Roman E. Pavlov <pre@mo.msk.ru>]
2430 *) The x509 application mishandled signing requests containing DSA
2431 keys when the signing key was also DSA and the parameters didn't match.
2433 It was supposed to omit the parameters when they matched the signing key:
2434 the verifying software was then supposed to automatically use the CA's
2435 parameters if they were absent from the end user certificate.
2437 Omitting parameters is no longer recommended. The test was also
2438 the wrong way round! This was probably due to unusual behaviour in
2439 EVP_cmp_parameters() which returns 1 if the parameters match.
2440 This meant that parameters were omitted when they *didn't* match and
2441 the certificate was useless. Certificates signed with 'ca' didn't have
2443 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
2445 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
2446 The interface is as follows:
2447 Applications can use
2448 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
2449 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
2450 "off" is now the default.
2451 The library internally uses
2452 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
2453 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
2454 to disable memory-checking temporarily.
2456 Some inconsistent states that previously were possible (and were
2457 even the default) are now avoided.
2459 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
2460 with each memory chunk allocated; this is occasionally more helpful
2461 than just having a counter.
2463 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
2465 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
2469 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
2470 which largely parallels "options", but is for changing API behaviour,
2471 whereas "options" are about protocol behaviour.
2472 Initial "mode" flags are:
2474 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
2475 a single record has been written.
2476 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
2477 retries use the same buffer location.
2478 (But all of the contents must be
2482 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
2485 *) Fix problems with no-hmac etc.
2486 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
2488 *) New functions RSA_get_default_method(), RSA_set_method() and
2489 RSA_get_method(). These allows replacement of RSA_METHODs without having
2490 to mess around with the internals of an RSA structure.
2493 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
2494 Also really enable memory leak checks in openssl.c and in some
2496 [Chad C. Mulligan, Bodo Moeller]
2498 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
2499 up the length of negative integers. This has now been simplified to just
2500 store the length when it is first determined and use it later, rather
2501 than trying to keep track of where data is copied and updating it to
2503 [Steve Henson, reported by Brien Wheeler
2504 <bwheeler@authentica-security.com>]
2506 *) Add a new function PKCS7_signatureVerify. This allows the verification
2507 of a PKCS#7 signature but with the signing certificate passed to the
2508 function itself. This contrasts with PKCS7_dataVerify which assumes the
2509 certificate is present in the PKCS#7 structure. This isn't always the
2510 case: certificates can be omitted from a PKCS#7 structure and be
2511 distributed by "out of band" means (such as a certificate database).
2514 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
2515 function prototypes in pem.h, also change util/mkdef.pl to add the
2516 necessary function names.
2519 *) mk1mf.pl (used by Windows builds) did not properly read the
2520 options set by Configure in the top level Makefile, and Configure
2521 was not even able to write more than one option correctly.
2522 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
2525 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
2526 file to be loaded from a BIO or FILE pointer. The BIO version will
2527 for example allow memory BIOs to contain config info.
2530 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
2531 Whoever hopes to achieve shared-library compatibility across versions
2532 must use this, not the compile-time macro.
2533 (Exercise 0.9.4: Which is the minimum library version required by
2535 Note: All this applies only to multi-threaded programs, others don't
2539 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
2540 through a BIO pair triggered the default case, i.e.
2541 SSLerr(...,SSL_R_UNKNOWN_STATE).
2544 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
2545 can use the SSL library even if none of the specific BIOs is
2549 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
2550 for the encoded length.
2551 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
2553 *) Add initial documentation of the X509V3 functions.
2556 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
2557 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
2558 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
2559 secure PKCS#8 private key format with a high iteration count.
2562 *) Fix determination of Perl interpreter: A perl or perl5
2563 _directory_ in $PATH was also accepted as the interpreter.
2564 [Ralf S. Engelschall]
2566 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
2567 wrong with it but it was very old and did things like calling
2568 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
2572 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
2573 to use the new extension code.
2576 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
2577 with macros. This should make it easier to change their form, add extra
2578 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
2582 *) Add to configuration table a new entry that can specify an alternative
2583 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
2584 according to Mark Crispin <MRC@Panda.COM>.
2588 *) DES CBC did not update the IV. Weird.
2591 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
2592 Changing the behaviour of the former might break existing programs --
2593 where IV updating is needed, des_ncbc_encrypt can be used.
2596 *) When bntest is run from "make test" it drives bc to check its
2597 calculations, as well as internally checking them. If an internal check
2598 fails, it needs to cause bc to give a non-zero result or make test carries
2599 on without noticing the failure. Fixed.
2602 *) DES library cleanups.
2605 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
2606 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
2607 ciphers. NOTE: although the key derivation function has been verified
2608 against some published test vectors it has not been extensively tested
2609 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
2613 *) Instead of "mkdir -p", which is not fully portable, use new
2614 Perl script "util/mkdir-p.pl".
2617 *) Rewrite the way password based encryption (PBE) is handled. It used to
2618 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
2619 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
2620 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
2621 the 'parameter' field of the AlgorithmIdentifier is passed to the
2622 underlying key generation function so it must do its own ASN1 parsing.
2623 This has also changed the EVP_PBE_CipherInit() function which now has a
2624 'parameter' argument instead of literal salt and iteration count values
2625 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
2628 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
2629 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
2630 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
2631 KEY" because this clashed with PKCS#8 unencrypted string. Since this
2632 value was just used as a "magic string" and not used directly its
2633 value doesn't matter.
2636 *) Introduce some semblance of const correctness to BN. Shame C doesn't
2640 *) "linux-sparc64" configuration (ultrapenguin).
2641 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
2642 "linux-sparc" configuration.
2643 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
2645 *) config now generates no-xxx options for missing ciphers.
2648 *) Support the EBCDIC character set (work in progress).
2649 File ebcdic.c not yet included because it has a different license.
2650 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
2652 *) Support BS2000/OSD-POSIX.
2653 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
2655 *) Make callbacks for key generation use void * instead of char *.
2658 *) Make S/MIME samples compile (not yet tested).
2661 *) Additional typesafe stacks.
2664 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
2668 Changes between 0.9.3 and 0.9.3a [29 May 1999]
2670 *) New configuration variant "sco5-gcc".
2672 *) Updated some demos.
2673 [Sean O Riordain, Wade Scholine]
2675 *) Add missing BIO_free at exit of pkcs12 application.
2678 *) Fix memory leak in conf.c.
2681 *) Updates for Win32 to assembler version of MD5.
2684 *) Set #! path to perl in apps/der_chop to where we found it
2685 instead of using a fixed path.
2688 *) SHA library changes for irix64-mips4-cc.
2691 *) Improvements for VMS support.
2695 Changes between 0.9.2b and 0.9.3 [24 May 1999]
2697 *) Bignum library bug fix. IRIX 6 passes "make test" now!
2698 This also avoids the problems with SC4.2 and unpatched SC5.
2699 [Andy Polyakov <appro@fy.chalmers.se>]
2701 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
2702 These are required because of the typesafe stack would otherwise break
2703 existing code. If old code used a structure member which used to be STACK
2704 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
2705 sk_num or sk_value it would produce an error because the num, data members
2706 are not present in STACK_OF. Now it just produces a warning. sk_set
2707 replaces the old method of assigning a value to sk_value
2708 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
2709 that does this will no longer work (and should use sk_set instead) but
2710 this could be regarded as a "questionable" behaviour anyway.
2713 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
2714 correctly handle encrypted S/MIME data.
2717 *) Change type of various DES function arguments from des_cblock
2718 (which means, in function argument declarations, pointer to char)
2719 to des_cblock * (meaning pointer to array with 8 char elements),
2720 which allows the compiler to do more typechecking; it was like
2721 that back in SSLeay, but with lots of ugly casts.
2723 Introduce new type const_des_cblock.
2726 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
2727 problems: find RecipientInfo structure that matches recipient certificate
2728 and initialise the ASN1 structures properly based on passed cipher.
2731 *) Belatedly make the BN tests actually check the results.
2734 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
2735 to and from BNs: it was completely broken. New compilation option
2736 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
2737 key elements as negative integers.
2740 *) Reorganize and speed up MD5.
2741 [Andy Polyakov <appro@fy.chalmers.se>]
2744 [Richard Levitte <richard@levitte.org>]
2746 *) New option -out to asn1parse to allow the parsed structure to be
2747 output to a file. This is most useful when combined with the -strparse
2748 option to examine the output of things like OCTET STRINGS.
2751 *) Make SSL library a little more fool-proof by not requiring any longer
2752 that SSL_set_{accept,connect}_state be called before
2753 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
2754 in many applications because usually everything *appeared* to work as
2755 intended anyway -- now it really works as intended).
2758 *) Move openssl.cnf out of lib/.
2761 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
2762 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
2763 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
2764 [Ralf S. Engelschall]
2766 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
2767 handle PKCS#7 enveloped data properly.
2768 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
2770 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
2771 copying pointers. The cert_st handling is changed by this in
2772 various ways (and thus what used to be known as ctx->default_cert
2773 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
2774 any longer when s->cert does not give us what we need).
2775 ssl_cert_instantiate becomes obsolete by this change.
2776 As soon as we've got the new code right (possibly it already is?),
2777 we have solved a couple of bugs of the earlier code where s->cert
2778 was used as if it could not have been shared with other SSL structures.
2780 Note that using the SSL API in certain dirty ways now will result
2781 in different behaviour than observed with earlier library versions:
2782 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
2783 does not influence s as it used to.
2785 In order to clean up things more thoroughly, inside SSL_SESSION
2786 we don't use CERT any longer, but a new structure SESS_CERT
2787 that holds per-session data (if available); currently, this is
2788 the peer's certificate chain and, for clients, the server's certificate
2789 and temporary key. CERT holds only those values that can have
2790 meaningful defaults in an SSL_CTX.
2793 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
2794 from the internal representation. Various PKCS#7 fixes: remove some
2795 evil casts and set the enc_dig_alg field properly based on the signing
2799 *) Allow PKCS#12 password to be set from the command line or the
2800 environment. Let 'ca' get its config file name from the environment
2801 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
2805 *) Allow certificate policies extension to use an IA5STRING for the
2806 organization field. This is contrary to the PKIX definition but
2807 VeriSign uses it and IE5 only recognises this form. Document 'x509'
2811 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
2812 without disallowing inline assembler and the like for non-pedantic builds.
2815 *) Support Borland C++ builder.
2816 [Janez Jere <jj@void.si>, modified by Ulf Möller]
2821 *) SHA-1 cleanups and performance enhancements.
2822 [Andy Polyakov <appro@fy.chalmers.se>]
2824 *) Sparc v8plus assembler for the bignum library.
2825 [Andy Polyakov <appro@fy.chalmers.se>]
2827 *) Accept any -xxx and +xxx compiler options in Configure.
2830 *) Update HPUX configuration.
2833 *) Add missing sk_<type>_unshift() function to safestack.h
2834 [Ralf S. Engelschall]
2836 *) New function SSL_CTX_use_certificate_chain_file that sets the
2837 "extra_cert"s in addition to the certificate. (This makes sense
2838 only for "PEM" format files, as chains as a whole are not
2842 *) Support verify_depth from the SSL API.
2843 x509_vfy.c had what can be considered an off-by-one-error:
2844 Its depth (which was not part of the external interface)
2845 was actually counting the number of certificates in a chain;
2846 now it really counts the depth.
2849 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
2850 instead of X509err, which often resulted in confusing error
2851 messages since the error codes are not globally unique
2852 (e.g. an alleged error in ssl3_accept when a certificate
2853 didn't match the private key).
2855 *) New function SSL_CTX_set_session_id_context that allows to set a default
2856 value (so that you don't need SSL_set_session_id_context for each
2857 connection using the SSL_CTX).
2860 *) OAEP decoding bug fix.
2863 *) Support INSTALL_PREFIX for package builders, as proposed by
2867 *) New Configure options "threads" and "no-threads". For systems
2868 where the proper compiler options are known (currently Solaris
2869 and Linux), "threads" is the default.
2872 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
2875 *) Install various scripts to $(OPENSSLDIR)/misc, not to
2876 $(INSTALLTOP)/bin -- they shouldn't clutter directories
2877 such as /usr/local/bin.
2880 *) "make linux-shared" to build shared libraries.
2881 [Niels Poppe <niels@netbox.org>]
2883 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
2886 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
2887 extension adding in x509 utility.
2890 *) Remove NOPROTO sections and error code comments.
2893 *) Partial rewrite of the DEF file generator to now parse the ANSI
2897 *) New Configure options --prefix=DIR and --openssldir=DIR.
2900 *) Complete rewrite of the error code script(s). It is all now handled
2901 by one script at the top level which handles error code gathering,
2902 header rewriting and C source file generation. It should be much better
2903 than the old method: it now uses a modified version of Ulf's parser to
2904 read the ANSI prototypes in all header files (thus the old K&R definitions
2905 aren't needed for error creation any more) and do a better job of
2906 translating function codes into names. The old 'ASN1 error code imbedded
2907 in a comment' is no longer necessary and it doesn't use .err files which
2908 have now been deleted. Also the error code call doesn't have to appear all
2909 on one line (which resulted in some large lines...).
2912 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
2915 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
2916 0 (which usually indicates a closed connection), but continue reading.
2919 *) Fix some race conditions.
2922 *) Add support for CRL distribution points extension. Add Certificate
2923 Policies and CRL distribution points documentation.
2926 *) Move the autogenerated header file parts to crypto/opensslconf.h.
2929 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
2930 8 of keying material. Merlin has also confirmed interop with this fix
2931 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
2932 [Merlin Hughes <merlin@baltimore.ie>]
2934 *) Fix lots of warnings.
2935 [Richard Levitte <levitte@stacken.kth.se>]
2937 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
2938 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
2939 [Richard Levitte <levitte@stacken.kth.se>]
2941 *) Fix problems with sizeof(long) == 8.
2942 [Andy Polyakov <appro@fy.chalmers.se>]
2944 *) Change functions to ANSI C.
2947 *) Fix typos in error codes.
2948 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
2950 *) Remove defunct assembler files from Configure.
2953 *) SPARC v8 assembler BIGNUM implementation.
2954 [Andy Polyakov <appro@fy.chalmers.se>]
2956 *) Support for Certificate Policies extension: both print and set.
2957 Various additions to support the r2i method this uses.
2960 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
2961 return a const string when you are expecting an allocated buffer.
2964 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
2965 types DirectoryString and DisplayText.
2968 *) Add code to allow r2i extensions to access the configuration database,
2969 add an LHASH database driver and add several ctx helper functions.
2972 *) Fix an evil bug in bn_expand2() which caused various BN functions to
2973 fail when they extended the size of a BIGNUM.
2976 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
2977 support typesafe stack.
2980 *) Fix typo in SSL_[gs]et_options().
2981 [Nils Frostberg <nils@medcom.se>]
2983 *) Delete various functions and files that belonged to the (now obsolete)
2984 old X509V3 handling code.
2987 *) New Configure option "rsaref".
2990 *) Don't auto-generate pem.h.
2993 *) Introduce type-safe ASN.1 SETs.
2996 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
2997 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
2999 *) Introduce type-safe STACKs. This will almost certainly break lots of code
3000 that links with OpenSSL (well at least cause lots of warnings), but fear
3001 not: the conversion is trivial, and it eliminates loads of evil casts. A
3002 few STACKed things have been converted already. Feel free to convert more.
3003 In the fullness of time, I'll do away with the STACK type altogether.
3006 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
3007 specified in <certfile> by updating the entry in the index.txt file.
3008 This way one no longer has to edit the index.txt file manually for
3009 revoking a certificate. The -revoke option does the gory details now.
3010 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
3012 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
3013 `-text' option at all and this way the `-noout -text' combination was
3014 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
3015 [Ralf S. Engelschall]
3017 *) Make sure a corresponding plain text error message exists for the
3018 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
3019 verify callback function determined that a certificate was revoked.
3020 [Ralf S. Engelschall]
3022 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
3023 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
3024 all available cipers including rc5, which was forgotten until now.
3025 In order to let the testing shell script know which algorithms
3026 are available, a new (up to now undocumented) command
3027 "openssl list-cipher-commands" is used.
3030 *) Bugfix: s_client occasionally would sleep in select() when
3031 it should have checked SSL_pending() first.
3034 *) New functions DSA_do_sign and DSA_do_verify to provide access to
3035 the raw DSA values prior to ASN.1 encoding.
3038 *) Tweaks to Configure
3039 [Niels Poppe <niels@netbox.org>]
3041 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
3045 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
3048 *) New config option to avoid instructions that are illegal on the 80386.
3049 The default code is faster, but requires at least a 486.
3052 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
3053 SSL2_SERVER_VERSION (not used at all) macros, which are now the
3054 same as SSL2_VERSION anyway.
3057 *) New "-showcerts" option for s_client.
3060 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
3061 application. Various cleanups and fixes.
3064 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
3065 modify error routines to work internally. Add error codes and PBE init
3066 to library startup routines.
3069 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
3070 packing functions to asn1 and evp. Changed function names and error
3071 codes along the way.
3074 *) PKCS12 integration: and so it begins... First of several patches to
3075 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
3076 objects to objects.h
3079 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
3080 and display support for Thawte strong extranet extension.
3083 *) Add LinuxPPC support.
3084 [Jeff Dubrule <igor@pobox.org>]
3086 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
3087 bn_div_words in alpha.s.
3088 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
3090 *) Make sure the RSA OAEP test is skipped under -DRSAref because
3091 OAEP isn't supported when OpenSSL is built with RSAref.
3092 [Ulf Moeller <ulf@fitug.de>]
3094 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
3095 so they no longer are missing under -DNOPROTO.
3096 [Soren S. Jorvang <soren@t.dk>]
3099 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
3101 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
3102 doesn't work when the session is reused. Coming soon!
3105 *) Fix a security hole, that allows sessions to be reused in the wrong
3106 context thus bypassing client cert protection! All software that uses
3107 client certs and session caches in multiple contexts NEEDS PATCHING to
3108 allow session reuse! A fuller solution is in the works.
3109 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
3111 *) Some more source tree cleanups (removed obsolete files
3112 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
3113 permission on "config" script to be executable) and a fix for the INSTALL
3115 [Ulf Moeller <ulf@fitug.de>]
3117 *) Remove some legacy and erroneous uses of malloc, free instead of
3119 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
3121 *) Make rsa_oaep_test return non-zero on error.
3122 [Ulf Moeller <ulf@fitug.de>]
3124 *) Add support for native Solaris shared libraries. Configure
3125 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
3126 if someone would make that last step automatic.
3127 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
3129 *) ctx_size was not built with the right compiler during "make links". Fixed.
3132 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
3133 except NULL ciphers". This means the default cipher list will no longer
3134 enable NULL ciphers. They need to be specifically enabled e.g. with
3135 the string "DEFAULT:eNULL".
3138 *) Fix to RSA private encryption routines: if p < q then it would
3139 occasionally produce an invalid result. This will only happen with
3140 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
3143 *) Be less restrictive and allow also `perl util/perlpath.pl
3144 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
3145 because this way one can also use an interpreter named `perl5' (which is
3146 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
3147 installed as `perl').
3148 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
3150 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
3151 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
3153 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
3154 advapi32.lib to Win32 build and change the pem test comparision
3155 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
3156 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
3157 and crypto/des/ede_cbcm_enc.c.
3160 *) DES quad checksum was broken on big-endian architectures. Fixed.
3163 *) Comment out two functions in bio.h that aren't implemented. Fix up the
3164 Win32 test batch file so it (might) work again. The Win32 test batch file
3165 is horrible: I feel ill....
3168 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
3169 in e_os.h. Audit of header files to check ANSI and non ANSI
3170 sections: 10 functions were absent from non ANSI section and not exported
3171 from Windows DLLs. Fixed up libeay.num for new functions.
3174 *) Make `openssl version' output lines consistent.
3175 [Ralf S. Engelschall]
3177 *) Fix Win32 symbol export lists for BIO functions: Added
3178 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
3179 to ms/libeay{16,32}.def.
3180 [Ralf S. Engelschall]
3182 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
3183 fine under Unix and passes some trivial tests I've now added. But the
3184 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
3185 added to make sure no one expects that this stuff really works in the
3186 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
3187 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
3189 [Ralf S. Engelschall]
3191 *) Fix the generation of two part addresses in perl.
3192 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
3194 *) Add config entry for Linux on MIPS.
3195 [John Tobey <jtobey@channel1.com>]
3197 *) Make links whenever Configure is run, unless we are on Windoze.
3200 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
3201 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
3205 *) Add a useful kludge to allow package maintainers to specify compiler and
3206 other platforms details on the command line without having to patch the
3207 Configure script everytime: One now can use ``perl Configure
3208 <id>:<details>'', i.e. platform ids are allowed to have details appended
3209 to them (seperated by colons). This is treated as there would be a static
3210 pre-configured entry in Configure's %table under key <id> with value
3211 <details> and ``perl Configure <id>'' is called. So, when you want to
3212 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
3213 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
3214 now, which overrides the FreeBSD-elf entry on-the-fly.
3215 [Ralf S. Engelschall]
3217 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
3220 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
3221 on the `perl Configure ...' command line. This way one can compile
3222 OpenSSL libraries with Position Independent Code (PIC) which is needed
3223 for linking it into DSOs.
3224 [Ralf S. Engelschall]
3226 *) Remarkably, export ciphers were totally broken and no-one had noticed!
3230 *) Cleaned up the LICENSE document: The official contact for any license
3231 questions now is the OpenSSL core team under openssl-core@openssl.org.
3232 And add a paragraph about the dual-license situation to make sure people
3233 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
3234 to the OpenSSL toolkit.
3235 [Ralf S. Engelschall]
3237 *) General source tree makefile cleanups: Made `making xxx in yyy...'
3238 display consistent in the source tree and replaced `/bin/rm' by `rm'.
3239 Additonally cleaned up the `make links' target: Remove unnecessary
3240 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
3241 to speed processing and no longer clutter the display with confusing
3242 stuff. Instead only the actually done links are displayed.
3243 [Ralf S. Engelschall]
3245 *) Permit null encryption ciphersuites, used for authentication only. It used
3246 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
3247 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
3251 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
3252 signed attributes when verifying signatures (this would break them),
3253 the detached data encoding was wrong and public keys obtained using
3254 X509_get_pubkey() weren't freed.
3257 *) Add text documentation for the BUFFER functions. Also added a work around
3258 to a Win95 console bug. This was triggered by the password read stuff: the
3259 last character typed gets carried over to the next fread(). If you were
3260 generating a new cert request using 'req' for example then the last
3261 character of the passphrase would be CR which would then enter the first
3265 *) Added the new `Includes OpenSSL Cryptography Software' button as
3266 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
3267 button and can be used by applications based on OpenSSL to show the
3268 relationship to the OpenSSL project.
3269 [Ralf S. Engelschall]
3271 *) Remove confusing variables in function signatures in files
3272 ssl/ssl_lib.c and ssl/ssl.h.
3273 [Lennart Bong <lob@kulthea.stacken.kth.se>]
3275 *) Don't install bss_file.c under PREFIX/include/
3276 [Lennart Bong <lob@kulthea.stacken.kth.se>]
3278 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
3279 functions that return function pointers and has support for NT specific
3280 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
3281 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
3282 unsigned to signed types: this was killing the Win32 compile.
3285 *) Add new certificate file to stack functions,
3286 SSL_add_dir_cert_subjects_to_stack() and
3287 SSL_add_file_cert_subjects_to_stack(). These largely supplant
3288 SSL_load_client_CA_file(), and can be used to add multiple certs easily
3289 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
3290 This means that Apache-SSL and similar packages don't have to mess around
3291 to add as many CAs as they want to the preferred list.
3294 *) Experiment with doxygen documentation. Currently only partially applied to
3296 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
3297 openssl.doxy as the configuration file.
3300 *) Get rid of remaining C++-style comments which strict C compilers hate.
3301 [Ralf S. Engelschall, pointed out by Carlos Amengual]
3303 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
3304 compiled in by default: it has problems with large keys.
3307 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
3308 DH private keys and/or callback functions which directly correspond to
3309 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
3310 is needed for applications which have to configure certificates on a
3311 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
3313 For the RSA certificate situation is makes no difference, but
3314 for the DSA certificate situation this fixes the "no shared cipher"
3315 problem where the OpenSSL cipher selection procedure failed because the
3316 temporary keys were not overtaken from the context and the API provided
3317 no way to reconfigure them.
3318 The new functions now let applications reconfigure the stuff and they
3319 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
3320 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
3321 non-public-API function ssl_cert_instantiate() is used as a helper
3322 function and also to reduce code redundancy inside ssl_rsa.c.
3323 [Ralf S. Engelschall]
3325 *) Move s_server -dcert and -dkey options out of the undocumented feature
3326 area because they are useful for the DSA situation and should be
3327 recognized by the users.
3328 [Ralf S. Engelschall]
3330 *) Fix the cipher decision scheme for export ciphers: the export bits are
3331 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
3332 SSL_EXP_MASK. So, the original variable has to be used instead of the
3333 already masked variable.
3334 [Richard Levitte <levitte@stacken.kth.se>]
3336 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
3337 [Richard Levitte <levitte@stacken.kth.se>]
3339 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
3340 from `int' to `unsigned int' because it's a length and initialized by
3341 EVP_DigestFinal() which expects an `unsigned int *'.
3342 [Richard Levitte <levitte@stacken.kth.se>]
3344 *) Don't hard-code path to Perl interpreter on shebang line of Configure
3345 script. Instead use the usual Shell->Perl transition trick.
3346 [Ralf S. Engelschall]
3348 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
3349 (in addition to RSA certificates) to match the behaviour of `openssl dsa
3350 -noout -modulus' as it's already the case for `openssl rsa -noout
3351 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
3352 currently the public key is printed (a decision which was already done by
3353 `openssl dsa -modulus' in the past) which serves a similar purpose.
3354 Additionally the NO_RSA no longer completely removes the whole -modulus
3355 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
3357 [Ralf S. Engelschall]
3359 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
3360 BIO. See the source (crypto/evp/bio_ok.c) for more info.
3361 [Arne Ansper <arne@ats.cyber.ee>]
3363 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
3364 to be added. Now both 'req' and 'ca' can use new objects defined in the
3368 *) Add cool BIO that does syslog (or event log on NT).
3369 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
3371 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
3372 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
3373 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
3374 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
3377 *) Add preliminary config info for new extension code.
3380 *) Make RSA_NO_PADDING really use no padding.
3381 [Ulf Moeller <ulf@fitug.de>]
3383 *) Generate errors when private/public key check is done.
3386 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
3387 for some CRL extensions and new objects added.
3390 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
3391 key usage extension and fuller support for authority key id.
3394 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
3395 padding method for RSA, which is recommended for new applications in PKCS
3396 #1 v2.0 (RFC 2437, October 1998).
3397 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
3398 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
3399 against Bleichbacher's attack on RSA.
3400 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
3403 *) Updates to the new SSL compression code
3404 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
3406 *) Fix so that the version number in the master secret, when passed
3407 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
3408 (because the server will not accept higher), that the version number
3409 is 0x03,0x01, not 0x03,0x00
3410 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
3412 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
3413 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
3414 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
3417 *) Support for RAW extensions where an arbitrary extension can be
3418 created by including its DER encoding. See apps/openssl.cnf for
3422 *) Make sure latest Perl versions don't interpret some generated C array
3423 code as Perl array code in the crypto/err/err_genc.pl script.
3424 [Lars Weber <3weber@informatik.uni-hamburg.de>]
3426 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
3427 not many people have the assembler. Various Win32 compilation fixes and
3428 update to the INSTALL.W32 file with (hopefully) more accurate Win32
3432 *) Modify configure script 'Configure' to automatically create crypto/date.h
3433 file under Win32 and also build pem.h from pem.org. New script
3434 util/mkfiles.pl to create the MINFO file on environments that can't do a
3435 'make files': perl util/mkfiles.pl >MINFO should work.
3438 *) Major rework of DES function declarations, in the pursuit of correctness
3439 and purity. As a result, many evil casts evaporated, and some weirdness,
3440 too. You may find this causes warnings in your code. Zapping your evil
3441 casts will probably fix them. Mostly.
3444 *) Fix for a typo in asn1.h. Bug fix to object creation script
3445 obj_dat.pl. It considered a zero in an object definition to mean
3446 "end of object": none of the objects in objects.h have any zeros
3447 so it wasn't spotted.
3448 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
3450 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
3451 Masking (CBCM). In the absence of test vectors, the best I have been able
3452 to do is check that the decrypt undoes the encrypt, so far. Send me test
3453 vectors if you have them.
3456 *) Correct calculation of key length for export ciphers (too much space was
3457 allocated for null ciphers). This has not been tested!
3460 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
3461 message is now correct (it understands "crypto" and "ssl" on its
3462 command line). There is also now an "update" option. This will update
3463 the util/ssleay.num and util/libeay.num files with any new functions.
3465 perl util/mkdef.pl crypto ssl update
3466 it will update them.
3469 *) Overhauled the Perl interface (perl/*):
3470 - ported BN stuff to OpenSSL's different BN library
3471 - made the perl/ source tree CVS-aware
3472 - renamed the package from SSLeay to OpenSSL (the files still contain
3473 their history because I've copied them in the repository)
3474 - removed obsolete files (the test scripts will be replaced
3475 by better Test::Harness variants in the future)
3476 [Ralf S. Engelschall]
3478 *) First cut for a very conservative source tree cleanup:
3479 1. merge various obsolete readme texts into doc/ssleay.txt
3480 where we collect the old documents and readme texts.
3481 2. remove the first part of files where I'm already sure that we no
3482 longer need them because of three reasons: either they are just temporary
3483 files which were left by Eric or they are preserved original files where
3484 I've verified that the diff is also available in the CVS via "cvs diff
3485 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
3486 the crypto/md/ stuff).
3487 [Ralf S. Engelschall]
3489 *) More extension code. Incomplete support for subject and issuer alt
3490 name, issuer and authority key id. Change the i2v function parameters
3491 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
3492 what that's for :-) Fix to ASN1 macro which messed up
3493 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
3496 *) Preliminary support for ENUMERATED type. This is largely copied from the
3500 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
3501 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
3503 *) Make sure `make rehash' target really finds the `openssl' program.
3504 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
3506 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
3507 like to hear about it if this slows down other processors.
3510 *) Add CygWin32 platform information to Configure script.
3511 [Alan Batie <batie@aahz.jf.intel.com>]
3513 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
3514 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
3516 *) New program nseq to manipulate netscape certificate sequences
3519 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
3523 *) Fixes to BN code. Previously the default was to define BN_RECURSION
3524 but the BN code had some problems that would cause failures when
3525 doing certificate verification and some other functions.
3526 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
3528 *) Add ASN1 and PEM code to support netscape certificate sequences.
3531 *) Add ASN1 and PEM code to support netscape certificate sequences.
3534 *) Add several PKIX and private extended key usage OIDs.
3537 *) Modify the 'ca' program to handle the new extension code. Modify
3538 openssl.cnf for new extension format, add comments.
3541 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
3542 and add a sample to openssl.cnf so req -x509 now adds appropriate
3546 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
3547 error code, add initial support to X509_print() and x509 application.
3550 *) Takes a deep breath and start addding X509 V3 extension support code. Add
3551 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
3552 stuff is currently isolated and isn't even compiled yet.
3555 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
3556 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
3557 Removed the versions check from X509 routines when loading extensions:
3558 this allows certain broken certificates that don't set the version
3559 properly to be processed.
3562 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
3563 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
3564 can still be regenerated with "make depend".
3567 *) Spelling mistake in C version of CAST-128.
3568 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
3570 *) Changes to the error generation code. The perl script err-code.pl
3571 now reads in the old error codes and retains the old numbers, only
3572 adding new ones if necessary. It also only changes the .err files if new
3573 codes are added. The makefiles have been modified to only insert errors
3574 when needed (to avoid needlessly modifying header files). This is done
3575 by only inserting errors if the .err file is newer than the auto generated
3576 C file. To rebuild all the error codes from scratch (the old behaviour)
3577 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
3578 or delete all the .err files.
3581 *) CAST-128 was incorrectly implemented for short keys. The C version has
3582 been fixed, but is untested. The assembler versions are also fixed, but
3583 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
3584 to regenerate it if needed.
3585 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
3586 Hagino <itojun@kame.net>]
3588 *) File was opened incorrectly in randfile.c.
3589 [Ulf Möller <ulf@fitug.de>]
3591 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
3592 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
3593 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
3594 al: it's just almost always a UTCTime. Note this patch adds new error
3595 codes so do a "make errors" if there are problems.
3598 *) Correct Linux 1 recognition in config.
3599 [Ulf Möller <ulf@fitug.de>]
3601 *) Remove pointless MD5 hash when using DSA keys in ca.
3602 [Anonymous <nobody@replay.com>]
3604 *) Generate an error if given an empty string as a cert directory. Also
3605 generate an error if handed NULL (previously returned 0 to indicate an
3606 error, but didn't set one).
3607 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
3609 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
3612 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
3613 parameters. This was causing a warning which killed off the Win32 compile.
3616 *) Remove C++ style comments from crypto/bn/bn_local.h.
3617 [Neil Costigan <neil.costigan@celocom.com>]
3619 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
3620 based on a text string, looking up short and long names and finally
3621 "dot" format. The "dot" format stuff didn't work. Added new function
3622 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
3623 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
3624 OID is not part of the table.
3627 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
3628 X509_LOOKUP_by_alias().
3631 *) Sort openssl functions by name.
3634 *) Get the gendsa program working (hopefully) and add it to app list. Remove
3635 encryption from sample DSA keys (in case anyone is interested the password
3639 *) Make _all_ *_free functions accept a NULL pointer.
3640 [Frans Heymans <fheymans@isaserver.be>]
3642 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
3644 [Anonymous <nobody@replay.com>]
3646 *) s_server should send the CAfile as acceptable CAs, not its own cert.
3647 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
3649 *) Don't blow it for numeric -newkey arguments to apps/req.
3650 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
3652 *) Temp key "for export" tests were wrong in s3_srvr.c.
3653 [Anonymous <nobody@replay.com>]
3655 *) Add prototype for temp key callback functions
3656 SSL_CTX_set_tmp_{rsa,dh}_callback().
3659 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
3660 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
3663 *) X509_name_add_entry() freed the wrong thing after an error.
3664 [Arne Ansper <arne@ats.cyber.ee>]
3666 *) rsa_eay.c would attempt to free a NULL context.
3667 [Arne Ansper <arne@ats.cyber.ee>]
3669 *) BIO_s_socket() had a broken should_retry() on Windoze.
3670 [Arne Ansper <arne@ats.cyber.ee>]
3672 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
3673 [Arne Ansper <arne@ats.cyber.ee>]
3675 *) Make sure the already existing X509_STORE->depth variable is initialized
3676 in X509_STORE_new(), but document the fact that this variable is still
3677 unused in the certificate verification process.
3678 [Ralf S. Engelschall]
3680 *) Fix the various library and apps files to free up pkeys obtained from
3681 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
3684 *) Fix reference counting in X509_PUBKEY_get(). This makes
3685 demos/maurice/example2.c work, amongst others, probably.
3686 [Steve Henson and Ben Laurie]
3688 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
3689 `openssl' and second, the shortcut symlinks for the `openssl <command>'
3690 are no longer created. This way we have a single and consistent command
3691 line interface `openssl <command>', similar to `cvs <command>'.
3692 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
3694 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
3695 BIT STRING wrapper always have zero unused bits.
3698 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
3701 *) Make the top-level INSTALL documentation easier to understand.
3704 *) Makefiles updated to exit if an error occurs in a sub-directory
3705 make (including if user presses ^C) [Paul Sutton]
3707 *) Make Montgomery context stuff explicit in RSA data structure.
3710 *) Fix build order of pem and err to allow for generated pem.h.
3713 *) Fix renumbering bug in X509_NAME_delete_entry().
3716 *) Enhanced the err-ins.pl script so it makes the error library number
3717 global and can add a library name. This is needed for external ASN1 and
3718 other error libraries.
3721 *) Fixed sk_insert which never worked properly.
3724 *) Fix ASN1 macros so they can handle indefinite length construted
3725 EXPLICIT tags. Some non standard certificates use these: they can now
3729 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
3730 into a single doc/ssleay.txt bundle. This way the information is still
3731 preserved but no longer messes up this directory. Now it's new room for
3732 the new set of documenation files.
3733 [Ralf S. Engelschall]
3735 *) SETs were incorrectly DER encoded. This was a major pain, because they
3736 shared code with SEQUENCEs, which aren't coded the same. This means that
3737 almost everything to do with SETs or SEQUENCEs has either changed name or
3738 number of arguments.
3739 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
3741 *) Fix test data to work with the above.
3744 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
3745 was already fixed by Eric for 0.9.1 it seems.
3746 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
3748 *) Autodetect FreeBSD3.
3751 *) Fix various bugs in Configure. This affects the following platforms:
3755 unixware-2.0-pentium
3759 *) Eliminate generated files from CVS. Reorder tests to regenerate files
3760 before they are needed.
3763 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
3767 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
3769 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
3770 changed SSLeay to OpenSSL in version strings.
3771 [Ralf S. Engelschall]
3773 *) Some fixups to the top-level documents.
3776 *) Fixed the nasty bug where rsaref.h was not found under compile-time
3777 because the symlink to include/ was missing.
3778 [Ralf S. Engelschall]
3780 *) Incorporated the popular no-RSA/DSA-only patches
3781 which allow to compile a RSA-free SSLeay.
3782 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
3784 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
3785 when "ssleay" is still not found.
3786 [Ralf S. Engelschall]
3788 *) Added more platforms to Configure: Cray T3E, HPUX 11,
3789 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
3791 *) Updated the README file.
3792 [Ralf S. Engelschall]
3794 *) Added various .cvsignore files in the CVS repository subdirs
3795 to make a "cvs update" really silent.
3796 [Ralf S. Engelschall]
3798 *) Recompiled the error-definition header files and added
3799 missing symbols to the Win32 linker tables.
3800 [Ralf S. Engelschall]
3802 *) Cleaned up the top-level documents;
3803 o new files: CHANGES and LICENSE
3804 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
3805 o merged COPYRIGHT into LICENSE
3806 o removed obsolete TODO file
3807 o renamed MICROSOFT to INSTALL.W32
3808 [Ralf S. Engelschall]
3810 *) Removed dummy files from the 0.9.1b source tree:
3811 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
3812 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
3813 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
3814 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
3815 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
3816 [Ralf S. Engelschall]
3818 *) Added various platform portability fixes.
3821 *) The Genesis of the OpenSSL rpject:
3822 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
3823 Young and Tim J. Hudson created while they were working for C2Net until
3825 [The OpenSSL Project]
3828 Changes between 0.9.0b and 0.9.1b [not released]
3830 *) Updated a few CA certificates under certs/
3833 *) Changed some BIGNUM api stuff.
3836 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
3837 DGUX x86, Linux Alpha, etc.
3840 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
3841 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
3845 *) Add -strparse option to asn1pars program which parses nested
3847 [Dr Stephen Henson <shenson@bigfoot.com>]
3849 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
3852 *) DSA fix for "ca" program.
3855 *) Added "-genkey" option to "dsaparam" program.
3858 *) Added RIPE MD160 (rmd160) message digest.
3861 *) Added -a (all) option to "ssleay version" command.
3864 *) Added PLATFORM define which is the id given to Configure.
3867 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
3870 *) Extended the ASN.1 parser routines.
3873 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
3876 *) Added a BN_CTX to the BN library.
3879 *) Fixed the weak key values in DES library
3882 *) Changed API in EVP library for cipher aliases.
3885 *) Added support for RC2/64bit cipher.
3888 *) Converted the lhash library to the crypto/mem.c functions.
3891 *) Added more recognized ASN.1 object ids.
3894 *) Added more RSA padding checks for SSL/TLS.
3897 *) Added BIO proxy/filter functionality.
3900 *) Added extra_certs to SSL_CTX which can be used
3901 send extra CA certificates to the client in the CA cert chain sending
3902 process. It can be configured with SSL_CTX_add_extra_chain_cert().
3905 *) Now Fortezza is denied in the authentication phase because
3906 this is key exchange mechanism is not supported by SSLeay at all.
3909 *) Additional PKCS1 checks.
3912 *) Support the string "TLSv1" for all TLS v1 ciphers.
3915 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
3916 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
3919 *) Fixed a few memory leaks.
3922 *) Fixed various code and comment typos.
3925 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
3926 bytes sent in the client random.
3927 [Edward Bishop <ebishop@spyglass.com>]