5 Changes between 1.0.1 and 1.1.0 [xx XXX xxxx]
7 *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
11 *) Add TLS v1.2 client side support for client authentication. Keep cache
12 of handshake records longer as we don't know the hash algorithm to use
13 until after the certificate request message is received.
16 *) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
17 FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implmeneted
18 outside the validated module in the FIPS capable OpenSSL.
21 *) Initial TLS v1.2 client support. Add a default signature algorithms
22 extension including all the algorithms we support. Parse new signature
23 format in client key exchange. Relax some ECC signing restrictions for
24 TLS v1.2 as indicated in RFC5246.
27 *) Add server support for TLS v1.2 signature algorithms extension. Switch
28 to new signature format when needed using client digest preference.
29 All server ciphersuites should now work correctly in TLS v1.2. No client
30 support yet and no support for client certificates.
33 *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
34 to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
35 ciphersuites. At present only RSA key exchange ciphersuites work with
36 TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
37 SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
41 *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
42 with this defined it will not be affected by any changes to ssl internal
43 structures. Add several utility functions to allow openssl application
44 to work with OPENSSL_NO_SSL_INTERN defined.
47 *) Minor change to DRBG entropy callback semantics. In some cases
48 there is no mutiple of the block length between min_len and
49 max_len. Allow the callback to return more than max_len bytes
50 of entropy but discard any extra: it is the callback's responsibility
51 to ensure that the extra data discarded does not impact the
52 requested amount of entropy.
55 *) Add PRNG security strength checks to RSA, DSA and ECDSA using
56 information in FIPS186-3, SP800-57 and SP800-131A.
59 *) CCM support via EVP. Interface is very similar to GCM case except we
60 must supply all data in one chunk (i.e. no update, final) and the
61 message length must be supplied if AAD is used. Add algorithm test
65 *) Initial version of POST overhaul. Add POST callback to allow the status
66 of POST to be monitored and/or failures induced. Modify fips_test_suite
67 to use callback. Always run all selftests even if one fails.
70 *) XTS support including algorithm test driver in the fips_gcmtest program.
71 Note: this does increase the maximum key length from 32 to 64 bytes but
72 there should be no binary compatibility issues as existing applications
73 will never use XTS mode.
76 *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
77 to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
78 performs algorithm blocking for unapproved PRNG types. Also do not
79 set PRNG type in FIPS_mode_set(): leave this to the application.
80 Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
81 the standard OpenSSL PRNG: set additional data to a date time vector.
84 *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
85 This shouldn't present any incompatibility problems because applications
86 shouldn't be using these directly and any that are will need to rethink
87 anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
90 *) Extensive self tests and health checking required by SP800-90 DRBG.
91 Remove strength parameter from FIPS_drbg_instantiate and always
92 instantiate at maximum supported strength.
96 [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
98 *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
101 *) New algorithm test program fips_dhvs to handle DH primitives only testing.
104 *) New function DH_compute_key_padded() to compute a DH key and pad with
105 leading zeroes if needed: this complies with SP800-56A et al.
108 *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
109 anything, incomplete, subject to change and largely untested at present.
112 *) Modify fipscanisteronly build option to only build the necessary object
113 files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
116 *) Add experimental option FIPSSYMS to give all symbols in
117 fipscanister.o and FIPS or fips prefix. This will avoid
118 conflicts with future versions of OpenSSL. Add perl script
119 util/fipsas.pl to preprocess assembly language source files
120 and rename any affected symbols.
123 *) Add selftest checks and algorithm block of non-fips algorithms in
124 FIPS mode. Remove DES2 from selftests.
127 *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
128 return internal method without any ENGINE dependencies. Add new
129 tiny fips sign and verify functions.
132 *) New build option no-ec2m to disable characteristic 2 code.
135 *) New build option "fipscanisteronly". This only builds fipscanister.o
136 and (currently) associated fips utilities. Uses the file Makefile.fips
137 instead of Makefile.org as the prototype.
140 *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
141 Update fips_gcmtest to use IV generator.
144 *) Initial, experimental EVP support for AES-GCM. AAD can be input by
145 setting output buffer to NULL. The *Final function must be
146 called although it will not retrieve any additional data. The tag
147 can be set or retrieved with a ctrl. The IV length is by default 12
148 bytes (96 bits) but can be set to an alternative value. If the IV
149 length exceeds the maximum IV length (currently 16 bytes) it cannot be
153 *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
154 underlying do_cipher function handles all cipher semantics itself
155 including padding and finalisation. This is useful if (for example)
156 an ENGINE cipher handles block padding itself. The behaviour of
157 do_cipher is subtly changed if this flag is set: the return value
158 is the number of characters written to the output buffer (zero is
159 no longer an error code) or a negative error code. Also if the
160 input buffer is NULL and length 0 finalisation should be performed.
163 *) If a candidate issuer certificate is already part of the constructed
164 path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
167 *) Improve forward-security support: add functions
169 void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
170 void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
172 for use by SSL/TLS servers; the callback function will be called whenever a
173 new session is created, and gets to decide whether the session may be
174 cached to make it resumable (return 0) or not (return 1). (As by the
175 SSL/TLS protocol specifications, the session_id sent by the server will be
176 empty to indicate that the session is not resumable; also, the server will
177 not generate RFC 4507 (RFC 5077) session tickets.)
179 A simple reasonable callback implementation is to return is_forward_secure.
180 This parameter will be set to 1 or 0 depending on the ciphersuite selected
181 by the SSL/TLS server library, indicating whether it can provide forward
183 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
185 *) Add Next Protocol Negotiation,
186 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
187 disabled with a no-npn flag to config or Configure. Code donated
189 [Adam Langley <agl@google.com> and Ben Laurie]
191 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
192 all platforms. Move ssize_t definition from e_os.h to the public
193 header file e_os2.h as it now appears in public header file cms.h
196 *) New function OPENSSL_gmtime_diff to find the difference in days
197 and seconds between two tm structures. This will be used to provide
198 additional functionality for ASN1_TIME.
201 *) New -sigopt option to the ca, req and x509 utilities. Additional
202 signature parameters can be passed using this option and in
206 *) Add RSA PSS signing function. This will generate and set the
207 appropriate AlgorithmIdentifiers for PSS based on those in the
208 corresponding EVP_MD_CTX structure. No application support yet.
211 *) Support for companion algorithm specific ASN1 signing routines.
212 New function ASN1_item_sign_ctx() signs a pre-initialised
213 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
214 the appropriate parameters.
217 *) Add new algorithm specific ASN1 verification initialisation function
218 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
219 handling will be the same no matter what EVP_PKEY_METHOD is used.
220 Add a PSS handler to support verification of PSS signatures: checked
221 against a number of sample certificates.
224 *) Add signature printing for PSS. Add PSS OIDs.
225 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
227 *) Add algorithm specific signature printing. An individual ASN1 method
228 can now print out signatures instead of the standard hex dump.
230 More complex signatures (e.g. PSS) can print out more meaningful
231 information. Include DSA version that prints out the signature
235 *) Add -trusted_first option which attempts to find certificates in the
236 trusted store even if an untrusted chain is also supplied.
239 *) Initial experimental support for explicitly trusted non-root CAs.
240 OpenSSL still tries to build a complete chain to a root but if an
241 intermediate CA has a trust setting included that is used. The first
242 setting is used: whether to trust or reject.
245 *) New -verify_name option in command line utilities to set verification
249 *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
250 Add CMAC pkey methods.
253 *) Experiemental regnegotiation in s_server -www mode. If the client
254 browses /reneg connection is renegotiated. If /renegcert it is
255 renegotiated requesting a certificate.
258 *) Add an "external" session cache for debugging purposes to s_server. This
259 should help trace issues which normally are only apparent in deployed
260 multi-process servers.
263 *) Experiemental password based recipient info support for CMS library:
264 implementing RFC3211.
267 *) Split password based encryption into PBES2 and PBKDF2 functions. This
268 neatly separates the code into cipher and PBE sections and is required
269 for some algorithms that split PBES2 into separate pieces (such as
273 *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
274 return value is ignored. NB. The functions RAND_add(), RAND_seed(),
275 BIO_set_cipher() and some obscure PEM functions were changed so they
276 can now return an error. The RAND changes required a change to the
277 RAND_METHOD structure.
280 *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
281 a gcc attribute to warn if the result of a function is ignored. This
282 is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
283 whose return value is often ignored.
286 Changes between 1.0.0d and 1.0.1 [xx XXX xxxx]
288 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
291 *) Add EC_GFp_nistp224_method(), a 64-bit optimized implementation for
292 elliptic curve NIST-P224 with constant-time single point multiplication on
293 typical inputs. EC_GROUP_new_by_curve_name() will automatically use this
294 (while EC_GROUP_new_curve_GFp() currently won't and prefers the more
295 flexible implementations).
297 The implementation requires support for the nonstandard type __uint128_t,
298 and so is disabled by default. To include this in your build of OpenSSL,
299 use -DEC_NISTP224_64_GCC_128 on the Configure (or config) command line,
300 and run "make depend" (or "make update").
301 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
303 *) Permit abbreviated handshakes when renegotiating using the function
304 SSL_renegotiate_abbreviated().
305 [Robin Seggelmann <seggelmann@fh-muenster.de>]
307 *) Add call to ENGINE_register_all_complete() to
308 ENGINE_load_builtin_engines(), so some implementations get used
309 automatically instead of needing explicit application support.
312 *) Add support for TLS key exporter as described in RFC5705.
313 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
315 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
316 a few changes are required:
318 Add SSL_OP_NO_TLSv1_1 flag.
320 Update version checking logic to handle version 1.1.
321 Add explicit IV handling (ported from DTLS code).
322 Add command line options to s_client/s_server.
325 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
327 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
328 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
330 *) Fix bug in string printing code: if *any* escaping is enabled we must
331 escape the escape character (backslash) or the resulting string is
335 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
337 *) Disable code workaround for ancient and obsolete Netscape browsers
338 and servers: an attacker can use it in a ciphersuite downgrade attack.
339 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
342 *) Fixed J-PAKE implementation error, originally discovered by
343 Sebastien Martini, further info and confirmation from Stefan
344 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
347 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
349 *) Fix extension code to avoid race conditions which can result in a buffer
350 overrun vulnerability: resumed sessions must not be modified as they can
351 be shared by multiple threads. CVE-2010-3864
354 *) Fix WIN32 build system to correctly link an ENGINE directory into
358 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
360 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
362 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
364 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
366 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
367 context. The operation can be customised via the ctrl mechanism in
368 case ENGINEs want to include additional functionality.
371 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
374 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
375 output hashes compatible with older versions of OpenSSL.
376 [Willy Weisz <weisz@vcpc.univie.ac.at>]
378 *) Fix compression algorithm handling: if resuming a session use the
379 compression algorithm of the resumed session instead of determining
380 it from client hello again. Don't allow server to change algorithm.
383 *) Add load_crls() function to apps tidying load_certs() too. Add option
384 to verify utility to allow additional CRLs to be included.
387 *) Update OCSP request code to permit adding custom headers to the request:
388 some responders need this.
391 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
393 [Julia Lawall <julia@diku.dk>]
395 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
396 needlessly dereferenced structures, used obsolete functions and
397 didn't handle all updated verify codes correctly.
400 *) Disable MD2 in the default configuration.
403 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
404 indicate the initial BIO being pushed or popped. This makes it possible
405 to determine whether the BIO is the one explicitly called or as a result
406 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
407 it handles reference counts correctly and doesn't zero out the I/O bio
408 when it is not being explicitly popped. WARNING: applications which
409 included workarounds for the old buggy behaviour will need to be modified
410 or they could free up already freed BIOs.
413 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
414 renaming to all platforms (within the 0.9.8 branch, this was
415 done conditionally on Netware platforms to avoid a name clash).
416 [Guenter <lists@gknw.net>]
418 *) Add ECDHE and PSK support to DTLS.
419 [Michael Tuexen <tuexen@fh-muenster.de>]
421 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
425 *) Add "missing" function EVP_MD_flags() (without this the only way to
426 retrieve a digest flags is by accessing the structure directly. Update
427 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
428 or cipher is registered as in the "from" argument. Print out all
429 registered digests in the dgst usage message instead of manually
430 attempting to work them out.
433 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
434 this allows the use of compression and extensions. Change default cipher
435 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
436 by default unless an application cipher string requests it.
439 *) Alter match criteria in PKCS12_parse(). It used to try to use local
440 key ids to find matching certificates and keys but some PKCS#12 files
441 don't follow the (somewhat unwritten) rules and this strategy fails.
442 Now just gather all certificates together and the first private key
443 then look for the first certificate that matches the key.
446 *) Support use of registered digest and cipher names for dgst and cipher
447 commands instead of having to add each one as a special case. So now
454 openssl dgst -sha256 foo
456 and this works for ENGINE based algorithms too.
460 *) Update Gost ENGINE to support parameter files.
461 [Victor B. Wagner <vitus@cryptocom.ru>]
463 *) Support GeneralizedTime in ca utility.
464 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
466 *) Enhance the hash format used for certificate directory links. The new
467 form uses the canonical encoding (meaning equivalent names will work
468 even if they aren't identical) and uses SHA1 instead of MD5. This form
469 is incompatible with the older format and as a result c_rehash should
470 be used to rebuild symbolic links.
473 *) Make PKCS#8 the default write format for private keys, replacing the
474 traditional format. This form is standardised, more secure and doesn't
475 include an implicit MD5 dependency.
478 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
479 committed to OpenSSL should pass this lot as a minimum.
482 *) Add session ticket override functionality for use by EAP-FAST.
483 [Jouni Malinen <j@w1.fi>]
485 *) Modify HMAC functions to return a value. Since these can be implemented
486 in an ENGINE errors can occur.
489 *) Type-checked OBJ_bsearch_ex.
492 *) Type-checked OBJ_bsearch. Also some constification necessitated
493 by type-checking. Still to come: TXT_DB, bsearch(?),
494 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
498 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
499 seconds to a tm structure directly, instead of going through OS
500 specific date routines. This avoids any issues with OS routines such
501 as the year 2038 bug. New *_adj() functions for ASN1 time structures
502 and X509_time_adj_ex() to cover the extended range. The existing
503 X509_time_adj() is still usable and will no longer have any date issues.
506 *) Delta CRL support. New use deltas option which will attempt to locate
507 and search any appropriate delta CRLs available.
509 This work was sponsored by Google.
512 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
513 code and add additional score elements. Validate alternate CRL paths
514 as part of the CRL checking and indicate a new error "CRL path validation
515 error" in this case. Applications wanting additional details can use
516 the verify callback and check the new "parent" field. If this is not
517 NULL CRL path validation is taking place. Existing applications wont
518 see this because it requires extended CRL support which is off by
521 This work was sponsored by Google.
524 *) Support for freshest CRL extension.
526 This work was sponsored by Google.
529 *) Initial indirect CRL support. Currently only supported in the CRLs
530 passed directly and not via lookup. Process certificate issuer
531 CRL entry extension and lookup CRL entries by bother issuer name
532 and serial number. Check and process CRL issuer entry in IDP extension.
534 This work was sponsored by Google.
537 *) Add support for distinct certificate and CRL paths. The CRL issuer
538 certificate is validated separately in this case. Only enabled if
539 an extended CRL support flag is set: this flag will enable additional
540 CRL functionality in future.
542 This work was sponsored by Google.
545 *) Add support for policy mappings extension.
547 This work was sponsored by Google.
550 *) Fixes to pathlength constraint, self issued certificate handling,
551 policy processing to align with RFC3280 and PKITS tests.
553 This work was sponsored by Google.
556 *) Support for name constraints certificate extension. DN, email, DNS
557 and URI types are currently supported.
559 This work was sponsored by Google.
562 *) To cater for systems that provide a pointer-based thread ID rather
563 than numeric, deprecate the current numeric thread ID mechanism and
564 replace it with a structure and associated callback type. This
565 mechanism allows a numeric "hash" to be extracted from a thread ID in
566 either case, and on platforms where pointers are larger than 'long',
567 mixing is done to help ensure the numeric 'hash' is usable even if it
568 can't be guaranteed unique. The default mechanism is to use "&errno"
569 as a pointer-based thread ID to distinguish between threads.
571 Applications that want to provide their own thread IDs should now use
572 CRYPTO_THREADID_set_callback() to register a callback that will call
573 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
575 Note that ERR_remove_state() is now deprecated, because it is tied
576 to the assumption that thread IDs are numeric. ERR_remove_state(0)
577 to free the current thread's error state should be replaced by
578 ERR_remove_thread_state(NULL).
580 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
581 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
582 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
583 application was previously providing a numeric thread callback that
584 was inappropriate for distinguishing threads, then uniqueness might
585 have been obtained with &errno that happened immediately in the
586 intermediate development versions of OpenSSL; this is no longer the
587 case, the numeric thread callback will now override the automatic use
589 [Geoff Thorpe, with help from Bodo Moeller]
591 *) Initial support for different CRL issuing certificates. This covers a
592 simple case where the self issued certificates in the chain exist and
593 the real CRL issuer is higher in the existing chain.
595 This work was sponsored by Google.
598 *) Removed effectively defunct crypto/store from the build.
601 *) Revamp of STACK to provide stronger type-checking. Still to come:
602 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
603 ASN1_STRING, CONF_VALUE.
606 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
607 RAM on SSL connections. This option can save about 34k per idle SSL.
610 *) Revamp of LHASH to provide stronger type-checking. Still to come:
611 STACK, TXT_DB, bsearch, qsort.
614 *) Initial support for Cryptographic Message Syntax (aka CMS) based
615 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
616 support for data, signedData, compressedData, digestedData and
617 encryptedData, envelopedData types included. Scripts to check against
618 RFC4134 examples draft and interop and consistency checks of many
619 content types and variants.
622 *) Add options to enc utility to support use of zlib compression BIO.
625 *) Extend mk1mf to support importing of options and assembly language
626 files from Configure script, currently only included in VC-WIN32.
627 The assembly language rules can now optionally generate the source
628 files from the associated perl scripts.
631 *) Implement remaining functionality needed to support GOST ciphersuites.
632 Interop testing has been performed using CryptoPro implementations.
633 [Victor B. Wagner <vitus@cryptocom.ru>]
635 *) s390x assembler pack.
638 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
642 *) Implement Opaque PRF Input TLS extension as specified in
643 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
644 official specification yet and no extension type assignment by
645 IANA exists, this extension (for now) will have to be explicitly
646 enabled when building OpenSSL by providing the extension number
647 to use. For example, specify an option
649 -DTLSEXT_TYPE_opaque_prf_input=0x9527
651 to the "config" or "Configure" script to enable the extension,
652 assuming extension number 0x9527 (which is a completely arbitrary
653 and unofficial assignment based on the MD5 hash of the Internet
654 Draft). Note that by doing so, you potentially lose
655 interoperability with other TLS implementations since these might
656 be using the same extension number for other purposes.
658 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
659 opaque PRF input value to use in the handshake. This will create
660 an interal copy of the length-'len' string at 'src', and will
661 return non-zero for success.
663 To get more control and flexibility, provide a callback function
666 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
667 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
671 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
674 Callback function 'cb' will be called in handshakes, and is
675 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
676 Argument 'arg' is for application purposes (the value as given to
677 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
678 be provided to the callback function). The callback function
679 has to return non-zero to report success: usually 1 to use opaque
680 PRF input just if possible, or 2 to enforce use of the opaque PRF
681 input. In the latter case, the library will abort the handshake
682 if opaque PRF input is not successfully negotiated.
684 Arguments 'peerinput' and 'len' given to the callback function
685 will always be NULL and 0 in the case of a client. A server will
686 see the client's opaque PRF input through these variables if
687 available (NULL and 0 otherwise). Note that if the server
688 provides an opaque PRF input, the length must be the same as the
689 length of the client's opaque PRF input.
691 Note that the callback function will only be called when creating
692 a new session (session resumption can resume whatever was
693 previously negotiated), and will not be called in SSL 2.0
694 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
695 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
696 for applications that need to enforce opaque PRF input.
700 *) Update ssl code to support digests other than SHA1+MD5 for handshake
703 [Victor B. Wagner <vitus@cryptocom.ru>]
705 *) Add RFC4507 support to OpenSSL. This includes the corrections in
706 RFC4507bis. The encrypted ticket format is an encrypted encoded
707 SSL_SESSION structure, that way new session features are automatically
710 If a client application caches session in an SSL_SESSION structure
711 support is transparent because tickets are now stored in the encoded
714 The SSL_CTX structure automatically generates keys for ticket
715 protection in servers so again support should be possible
716 with no application modification.
718 If a client or server wishes to disable RFC4507 support then the option
719 SSL_OP_NO_TICKET can be set.
721 Add a TLS extension debugging callback to allow the contents of any client
722 or server extensions to be examined.
724 This work was sponsored by Google.
727 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
728 OpenSSL should now compile cleanly on gcc 4.2
729 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
731 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
732 support including streaming MAC support: this is required for GOST
734 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
736 *) Add option -stream to use PKCS#7 streaming in smime utility. New
737 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
738 to output in BER and PEM format.
741 *) Experimental support for use of HMAC via EVP_PKEY interface. This
742 allows HMAC to be handled via the EVP_DigestSign*() interface. The
743 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
744 ENGINE support for HMAC keys which are unextractable. New -mac and
745 -macopt options to dgst utility.
748 *) New option -sigopt to dgst utility. Update dgst to use
749 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
750 alternative signing paramaters such as X9.31 or PSS in the dgst
754 *) Change ssl_cipher_apply_rule(), the internal function that does
755 the work each time a ciphersuite string requests enabling
756 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
757 removing ("!foo+bar") a class of ciphersuites: Now it maintains
758 the order of disabled ciphersuites such that those ciphersuites
759 that most recently went from enabled to disabled not only stay
760 in order with respect to each other, but also have higher priority
761 than other disabled ciphersuites the next time ciphersuites are
764 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
765 the same ciphersuites as with "HIGH" alone, but in a specific
766 order where the PSK ciphersuites come first (since they are the
767 most recently disabled ciphersuites when "HIGH" is parsed).
769 Also, change ssl_create_cipher_list() (using this new
770 funcionality) such that between otherwise identical
771 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
775 *) Change ssl_create_cipher_list() so that it automatically
776 arranges the ciphersuites in reasonable order before starting
777 to process the rule string. Thus, the definition for "DEFAULT"
778 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
779 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
780 This makes it much easier to arrive at a reasonable default order
781 in applications for which anonymous ciphers are OK (meaning
782 that you can't actually use DEFAULT).
783 [Bodo Moeller; suggested by Victor Duchovni]
785 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
786 processing) into multiple integers instead of setting
787 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
788 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
789 (These masks as well as the individual bit definitions are hidden
790 away into the non-exported interface ssl/ssl_locl.h, so this
791 change to the definition of the SSL_CIPHER structure shouldn't
792 affect applications.) This give us more bits for each of these
793 categories, so there is no longer a need to coagulate AES128 and
794 AES256 into a single algorithm bit, and to coagulate Camellia128
795 and Camellia256 into a single algorithm bit, which has led to all
798 Thus, among other things, the kludge introduced in 0.9.7m and
799 0.9.8e for masking out AES256 independently of AES128 or masking
800 out Camellia256 independently of AES256 is not needed here in 0.9.9.
802 With the change, we also introduce new ciphersuite aliases that
803 so far were missing: "AES128", "AES256", "CAMELLIA128", and
807 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
808 Use the leftmost N bytes of the signature input if the input is
809 larger than the prime q (with N being the size in bytes of q).
812 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
813 it yet and it is largely untested.
816 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
819 *) Initial incomplete changes to avoid need for function casts in OpenSSL
820 some compilers (gcc 4.2 and later) reject their use. Safestack is
821 reimplemented. Update ASN1 to avoid use of legacy functions.
824 *) Win32/64 targets are linked with Winsock2.
827 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
828 to external functions. This can be used to increase CRL handling
829 efficiency especially when CRLs are very large by (for example) storing
830 the CRL revoked certificates in a database.
833 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
834 new CRLs added to a directory can be used. New command line option
835 -verify_return_error to s_client and s_server. This causes real errors
836 to be returned by the verify callback instead of carrying on no matter
837 what. This reflects the way a "real world" verify callback would behave.
840 *) GOST engine, supporting several GOST algorithms and public key formats.
841 Kindly donated by Cryptocom.
844 *) Partial support for Issuing Distribution Point CRL extension. CRLs
845 partitioned by DP are handled but no indirect CRL or reason partitioning
846 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
847 selected via a scoring technique which handles IDP and AKID in CRLs.
850 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
851 will ultimately be used for all verify operations: this will remove the
852 X509_STORE dependency on certificate verification and allow alternative
853 lookup methods. X509_STORE based implementations of these two callbacks.
856 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
857 Modify get_crl() to find a valid (unexpired) CRL if possible.
860 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
861 this would be called X509_CRL_cmp() but that name is already used by
862 a function that just compares CRL issuer names. Cache several CRL
863 extensions in X509_CRL structure and cache CRLDP in X509.
866 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
867 this maps equivalent X509_NAME structures into a consistent structure.
868 Name comparison can then be performed rapidly using memcmp().
871 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
875 *) Allow digests to supply their own micalg string for S/MIME type using
876 the ctrl EVP_MD_CTRL_MICALG.
879 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
880 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
881 ctrl. It can then customise the structure before and/or after signing
885 *) New function OBJ_add_sigid() to allow application defined signature OIDs
886 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
887 to free up any added signature OIDs.
890 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
891 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
892 digest and cipher tables. New options added to openssl utility:
893 list-message-digest-algorithms and list-cipher-algorithms.
896 *) Change the array representation of binary polynomials: the list
897 of degrees of non-zero coefficients is now terminated with -1.
898 Previously it was terminated with 0, which was also part of the
899 value; thus, the array representation was not applicable to
900 polynomials where t^0 has coefficient zero. This change makes
901 the array representation useful in a more general context.
904 *) Various modifications and fixes to SSL/TLS cipher string
905 handling. For ECC, the code now distinguishes between fixed ECDH
906 with RSA certificates on the one hand and with ECDSA certificates
907 on the other hand, since these are separate ciphersuites. The
908 unused code for Fortezza ciphersuites has been removed.
910 For consistency with EDH, ephemeral ECDH is now called "EECDH"
911 (not "ECDHE"). For consistency with the code for DH
912 certificates, use of ECDH certificates is now considered ECDH
913 authentication, not RSA or ECDSA authentication (the latter is
914 merely the CA's signing algorithm and not actively used in the
917 The temporary ciphersuite alias "ECCdraft" is no longer
918 available, and ECC ciphersuites are no longer excluded from "ALL"
919 and "DEFAULT". The following aliases now exist for RFC 4492
920 ciphersuites, most of these by analogy with the DH case:
922 kECDHr - ECDH cert, signed with RSA
923 kECDHe - ECDH cert, signed with ECDSA
924 kECDH - ECDH cert (signed with either RSA or ECDSA)
925 kEECDH - ephemeral ECDH
926 ECDH - ECDH cert or ephemeral ECDH
932 AECDH - anonymous ECDH
933 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
937 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
938 Use correct micalg parameters depending on digest(s) in signed message.
941 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
942 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
945 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
946 an engine to register a method. Add ENGINE lookups for methods and
947 functional reference processing.
950 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
951 EVP_{Sign,Verify}* which allow an application to customise the signature
955 *) New -resign option to smime utility. This adds one or more signers
956 to an existing PKCS#7 signedData structure. Also -md option to use an
957 alternative message digest algorithm for signing.
960 *) Tidy up PKCS#7 routines and add new functions to make it easier to
961 create PKCS7 structures containing multiple signers. Update smime
962 application to support multiple signers.
965 *) New -macalg option to pkcs12 utility to allow setting of an alternative
969 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
970 Reorganize PBE internals to lookup from a static table using NIDs,
971 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
972 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
973 PRF which will be automatically used with PBES2.
976 *) Replace the algorithm specific calls to generate keys in "req" with the
980 *) Update PKCS#7 enveloped data routines to use new API. This is now
981 supported by any public key method supporting the encrypt operation. A
982 ctrl is added to allow the public key algorithm to examine or modify
983 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
987 *) Add a ctrl to asn1 method to allow a public key algorithm to express
988 a default digest type to use. In most cases this will be SHA1 but some
989 algorithms (such as GOST) need to specify an alternative digest. The
990 return value indicates how strong the prefernce is 1 means optional and
991 2 is mandatory (that is it is the only supported type). Modify
992 ASN1_item_sign() to accept a NULL digest argument to indicate it should
993 use the default md. Update openssl utilities to use the default digest
994 type for signing if it is not explicitly indicated.
997 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
998 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
999 signing method from the key type. This effectively removes the link
1000 between digests and public key types.
1003 *) Add an OID cross reference table and utility functions. Its purpose is to
1004 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
1005 rsaEncryption. This will allow some of the algorithm specific hackery
1006 needed to use the correct OID to be removed.
1009 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
1010 structures for PKCS7_sign(). They are now set up by the relevant public
1014 *) Add provisional EC pkey method with support for ECDSA and ECDH.
1017 *) Add support for key derivation (agreement) in the API, DH method and
1021 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
1022 public and private key formats. As a side effect these add additional
1023 command line functionality not previously available: DSA signatures can be
1024 generated and verified using pkeyutl and DH key support and generation in
1029 [Oliver Tappe <zooey@hirschkaefer.de>]
1031 *) New make target "install_html_docs" installs HTML renditions of the
1033 [Oliver Tappe <zooey@hirschkaefer.de>]
1035 *) New utility "genpkey" this is analagous to "genrsa" etc except it can
1036 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
1037 support key and parameter generation and add initial key generation
1038 functionality for RSA.
1041 *) Add functions for main EVP_PKEY_method operations. The undocumented
1042 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
1043 EVP_PKEY_{encrypt,decrypt}_old.
1046 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
1047 key API, doesn't do much yet.
1050 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
1051 public key algorithms. New option to openssl utility:
1052 "list-public-key-algorithms" to print out info.
1055 *) Implement the Supported Elliptic Curves Extension for
1056 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1059 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
1060 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
1063 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
1064 utilities such as rsa, dsa, dsaparam etc except they process any key
1068 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
1069 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
1070 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
1074 *) Initial support for pluggable public key ASN1.
1075 De-spaghettify the public key ASN1 handling. Move public and private
1076 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
1077 algorithm specific handling to a single module within the relevant
1078 algorithm directory. Add functions to allow (near) opaque processing
1079 of public and private key structures.
1082 *) Implement the Supported Point Formats Extension for
1083 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
1086 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
1087 for the psk identity [hint] and the psk callback functions to the
1088 SSL_SESSION, SSL and SSL_CTX structure.
1091 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
1095 SSL_CTX_use_psk_identity_hint
1096 SSL_get_psk_identity_hint
1097 SSL_get_psk_identity
1098 SSL_use_psk_identity_hint
1100 [Mika Kousa and Pasi Eronen of Nokia Corporation]
1102 *) Add RFC 3161 compliant time stamp request creation, response generation
1103 and response verification functionality.
1104 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
1106 *) Add initial support for TLS extensions, specifically for the server_name
1107 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1108 have new members for a host name. The SSL data structure has an
1109 additional member SSL_CTX *initial_ctx so that new sessions can be
1110 stored in that context to allow for session resumption, even after the
1111 SSL has been switched to a new SSL_CTX in reaction to a client's
1112 server_name extension.
1114 New functions (subject to change):
1116 SSL_get_servername()
1117 SSL_get_servername_type()
1120 New CTRL codes and macros (subject to change):
1122 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1123 - SSL_CTX_set_tlsext_servername_callback()
1124 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1125 - SSL_CTX_set_tlsext_servername_arg()
1126 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1128 openssl s_client has a new '-servername ...' option.
1130 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1131 '-key2 ...', '-servername_fatal' (subject to change). This allows
1132 testing the HostName extension for a specific single host name ('-cert'
1133 and '-key' remain fallbacks for handshakes without HostName
1134 negotiation). If the unrecogninzed_name alert has to be sent, this by
1135 default is a warning; it becomes fatal with the '-servername_fatal'
1138 [Peter Sylvester, Remy Allais, Christophe Renou]
1140 *) Whirlpool hash implementation is added.
1143 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
1144 bn(64,32). Because of instruction set limitations it doesn't have
1145 any negative impact on performance. This was done mostly in order
1146 to make it possible to share assembler modules, such as bn_mul_mont
1147 implementations, between 32- and 64-bit builds without hassle.
1150 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
1151 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
1155 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
1156 dedicated Montgomery multiplication procedure, is introduced.
1157 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
1158 "64-bit" performance on certain 32-bit targets.
1161 *) New option SSL_OP_NO_COMP to disable use of compression selectively
1162 in SSL structures. New SSL ctrl to set maximum send fragment size.
1163 Save memory by seeting the I/O buffer sizes dynamically instead of
1164 using the maximum available value.
1167 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
1168 in addition to the text details.
1171 *) Very, very preliminary EXPERIMENTAL support for printing of general
1172 ASN1 structures. This currently produces rather ugly output and doesn't
1173 handle several customised structures at all.
1176 *) Integrated support for PVK file format and some related formats such
1177 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
1178 these in the 'rsa' and 'dsa' utilities.
1181 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
1184 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
1185 place for the (very old) "NETSCAPE" format certificates which are now
1186 handled using new ASN1 code equivalents.
1189 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
1190 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
1191 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
1194 *) Modify CRL distribution points extension code to print out previously
1195 unsupported fields. Enhance extension setting code to allow setting of
1199 *) Add print and set support for Issuing Distribution Point CRL extension.
1202 *) Change 'Configure' script to enable Camellia by default.
1205 Changes between 0.9.8q and 0.9.8r [8 Feb 2011]
1207 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
1208 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
1210 *) Fix bug in string printing code: if *any* escaping is enabled we must
1211 escape the escape character (backslash) or the resulting string is
1215 Changes between 0.9.8p and 0.9.8q [2 Dec 2010]
1217 *) Disable code workaround for ancient and obsolete Netscape browsers
1218 and servers: an attacker can use it in a ciphersuite downgrade attack.
1219 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
1222 *) Fixed J-PAKE implementation error, originally discovered by
1223 Sebastien Martini, further info and confirmation from Stefan
1224 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
1227 Changes between 0.9.8o and 0.9.8p [16 Nov 2010]
1229 *) Fix extension code to avoid race conditions which can result in a buffer
1230 overrun vulnerability: resumed sessions must not be modified as they can
1231 be shared by multiple threads. CVE-2010-3864
1234 *) Fix for double free bug in ssl/s3_clnt.c CVE-2010-2939
1237 *) Don't reencode certificate when calculating signature: cache and use
1238 the original encoding instead. This makes signature verification of
1239 some broken encodings work correctly.
1242 *) ec2_GF2m_simple_mul bugfix: compute correct result if the output EC_POINT
1243 is also one of the inputs.
1244 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
1246 *) Don't repeatedly append PBE algorithms to table if they already exist.
1247 Sort table on each new add. This effectively makes the table read only
1248 after all algorithms are added and subsequent calls to PKCS12_pbe_add
1252 Changes between 0.9.8n and 0.9.8o [01 Jun 2010]
1254 [NB: OpenSSL 0.9.8o and later 0.9.8 patch levels were released after
1257 *) Correct a typo in the CMS ASN1 module which can result in invalid memory
1258 access or freeing data twice (CVE-2010-0742)
1259 [Steve Henson, Ronald Moesbergen <intercommit@gmail.com>]
1261 *) Add SHA2 algorithms to SSL_library_init(). SHA2 is becoming far more
1262 common in certificates and some applications which only call
1263 SSL_library_init and not OpenSSL_add_all_algorithms() will fail.
1267 Reduce copying into .apps and .test in makevms.com
1268 Don't try to use blank CA certificate in CA.com
1269 Allow use of C files from original directories in maketests.com
1270 [Steven M. Schweda" <sms@antinode.info>]
1272 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
1274 *) When rejecting SSL/TLS records due to an incorrect version number, never
1275 update s->server with a new major version number. As of
1276 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
1277 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
1278 the previous behavior could result in a read attempt at NULL when
1279 receiving specific incorrect SSL/TLS records once record payload
1280 protection is active. (CVE-2010-0740)
1281 [Bodo Moeller, Adam Langley <agl@chromium.org>]
1283 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
1284 could be crashed if the relevant tables were not present (e.g. chrooted).
1285 [Tomas Hoger <thoger@redhat.com>]
1287 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
1289 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
1290 [Martin Olsson, Neel Mehta]
1292 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
1293 accommodate for stack sorting, always a write lock!).
1296 *) On some versions of WIN32 Heap32Next is very slow. This can cause
1297 excessive delays in the RAND_poll(): over a minute. As a workaround
1298 include a time check in the inner Heap32Next loop too.
1301 *) The code that handled flushing of data in SSL/TLS originally used the
1302 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
1303 the problem outlined in PR#1949. The fix suggested there however can
1304 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
1305 of Apache). So instead simplify the code to flush unconditionally.
1306 This should be fine since flushing with no data to flush is a no op.
1309 *) Handle TLS versions 2.0 and later properly and correctly use the
1310 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
1311 off ancient servers have a habit of sticking around for a while...
1314 *) Modify compression code so it frees up structures without using the
1315 ex_data callbacks. This works around a problem where some applications
1316 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
1317 restarting) then use compression (e.g. SSL with compression) later.
1318 This results in significant per-connection memory leaks and
1319 has caused some security issues including CVE-2008-1678 and
1323 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
1324 change when encrypting or decrypting.
1327 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
1328 connect and renegotiate with servers which do not support RI.
1329 Until RI is more widely deployed this option is enabled by default.
1332 *) Add "missing" ssl ctrls to clear options and mode.
1335 *) If client attempts to renegotiate and doesn't support RI respond with
1336 a no_renegotiation alert as required by RFC5746. Some renegotiating
1337 TLS clients will continue a connection gracefully when they receive
1338 the alert. Unfortunately OpenSSL mishandled this alert and would hang
1339 waiting for a server hello which it will never receive. Now we treat a
1340 received no_renegotiation alert as a fatal error. This is because
1341 applications requesting a renegotiation might well expect it to succeed
1342 and would have no code in place to handle the server denying it so the
1343 only safe thing to do is to terminate the connection.
1346 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
1347 peer supports secure renegotiation and 0 otherwise. Print out peer
1348 renegotiation support in s_client/s_server.
1351 *) Replace the highly broken and deprecated SPKAC certification method with
1352 the updated NID creation version. This should correctly handle UTF8.
1355 *) Implement RFC5746. Re-enable renegotiation but require the extension
1356 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
1357 turns out to be a bad idea. It has been replaced by
1358 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
1359 SSL_CTX_set_options(). This is really not recommended unless you
1360 know what you are doing.
1361 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
1363 *) Fixes to stateless session resumption handling. Use initial_ctx when
1364 issuing and attempting to decrypt tickets in case it has changed during
1365 servername handling. Use a non-zero length session ID when attempting
1366 stateless session resumption: this makes it possible to determine if
1367 a resumption has occurred immediately after receiving server hello
1368 (several places in OpenSSL subtly assume this) instead of later in
1372 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
1373 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
1374 fixes for a few places where the return code is not checked
1376 [Julia Lawall <julia@diku.dk>]
1378 *) Add --strict-warnings option to Configure script to include devteam
1379 warnings in other configurations.
1382 *) Add support for --libdir option and LIBDIR variable in makefiles. This
1383 makes it possible to install openssl libraries in locations which
1384 have names other than "lib", for example "/usr/lib64" which some
1386 [Steve Henson, based on patch from Jeremy Utley]
1388 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
1389 X690 8.9.12 and can produce some misleading textual output of OIDs.
1390 [Steve Henson, reported by Dan Kaminsky]
1392 *) Delete MD2 from algorithm tables. This follows the recommendation in
1393 several standards that it is not used in new applications due to
1394 several cryptographic weaknesses. For binary compatibility reasons
1395 the MD2 API is still compiled in by default.
1398 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
1402 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
1403 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
1405 [Guenter <lists@gknw.net>]
1407 *) Fix the server certificate chain building code to use X509_verify_cert(),
1408 it used to have an ad-hoc builder which was unable to cope with anything
1409 other than a simple chain.
1410 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
1412 *) Don't check self signed certificate signatures in X509_verify_cert()
1413 by default (a flag can override this): it just wastes time without
1414 adding any security. As a useful side effect self signed root CAs
1415 with non-FIPS digests are now usable in FIPS mode.
1418 *) In dtls1_process_out_of_seq_message() the check if the current message
1419 is already buffered was missing. For every new message was memory
1420 allocated, allowing an attacker to perform an denial of service attack
1421 with sending out of seq handshake messages until there is no memory
1422 left. Additionally every future messege was buffered, even if the
1423 sequence number made no sense and would be part of another handshake.
1424 So only messages with sequence numbers less than 10 in advance will be
1425 buffered. (CVE-2009-1378)
1426 [Robin Seggelmann, discovered by Daniel Mentz]
1428 *) Records are buffered if they arrive with a future epoch to be
1429 processed after finishing the corresponding handshake. There is
1430 currently no limitation to this buffer allowing an attacker to perform
1431 a DOS attack with sending records with future epochs until there is no
1432 memory left. This patch adds the pqueue_size() function to detemine
1433 the size of a buffer and limits the record buffer to 100 entries.
1435 [Robin Seggelmann, discovered by Daniel Mentz]
1437 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
1438 parent structure is freed. (CVE-2009-1379)
1441 *) Handle non-blocking I/O properly in SSL_shutdown() call.
1442 [Darryl Miles <darryl-mailinglists@netbauds.net>]
1445 [Ilya O. <vrghost@gmail.com>]
1447 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
1449 *) Disable renegotiation completely - this fixes a severe security
1450 problem (CVE-2009-3555) at the cost of breaking all
1451 renegotiation. Renegotiation can be re-enabled by setting
1452 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
1453 run-time. This is really not recommended unless you know what
1457 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
1459 *) Don't set val to NULL when freeing up structures, it is freed up by
1460 underlying code. If sizeof(void *) > sizeof(long) this can result in
1461 zeroing past the valid field. (CVE-2009-0789)
1462 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
1464 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
1465 checked correctly. This would allow some invalid signed attributes to
1466 appear to verify correctly. (CVE-2009-0591)
1467 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1469 *) Reject UniversalString and BMPString types with invalid lengths. This
1470 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
1471 a legal length. (CVE-2009-0590)
1474 *) Set S/MIME signing as the default purpose rather than setting it
1475 unconditionally. This allows applications to override it at the store
1479 *) Permit restricted recursion of ASN1 strings. This is needed in practice
1480 to handle some structures.
1483 *) Improve efficiency of mem_gets: don't search whole buffer each time
1485 [Jeremy Shapiro <jnshapir@us.ibm.com>]
1487 *) New -hex option for openssl rand.
1490 *) Print out UTF8String and NumericString when parsing ASN1.
1493 *) Support NumericString type for name components.
1496 *) Allow CC in the environment to override the automatically chosen
1497 compiler. Note that nothing is done to ensure flags work with the
1501 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
1503 *) Properly check EVP_VerifyFinal() and similar return values
1505 [Ben Laurie, Bodo Moeller, Google Security Team]
1507 *) Enable TLS extensions by default.
1510 *) Allow the CHIL engine to be loaded, whether the application is
1511 multithreaded or not. (This does not release the developer from the
1512 obligation to set up the dynamic locking callbacks.)
1513 [Sander Temme <sander@temme.net>]
1515 *) Use correct exit code if there is an error in dgst command.
1516 [Steve Henson; problem pointed out by Roland Dirlewanger]
1518 *) Tweak Configure so that you need to say "experimental-jpake" to enable
1519 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
1522 *) Add experimental JPAKE support, including demo authentication in
1523 s_client and s_server.
1526 *) Set the comparison function in v3_addr_canonize().
1527 [Rob Austein <sra@hactrn.net>]
1529 *) Add support for XMPP STARTTLS in s_client.
1530 [Philip Paeps <philip@freebsd.org>]
1532 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
1533 to ensure that even with this option, only ciphersuites in the
1534 server's preference list will be accepted. (Note that the option
1535 applies only when resuming a session, so the earlier behavior was
1536 just about the algorithm choice for symmetric cryptography.)
1539 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
1541 *) Fix NULL pointer dereference if a DTLS server received
1542 ChangeCipherSpec as first record (CVE-2009-1386).
1545 *) Fix a state transitition in s3_srvr.c and d1_srvr.c
1546 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
1549 *) The fix in 0.9.8c that supposedly got rid of unsafe
1550 double-checked locking was incomplete for RSA blinding,
1551 addressing just one layer of what turns out to have been
1552 doubly unsafe triple-checked locking.
1554 So now fix this for real by retiring the MONT_HELPER macro
1555 in crypto/rsa/rsa_eay.c.
1557 [Bodo Moeller; problem pointed out by Marius Schilder]
1559 *) Various precautionary measures:
1561 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
1563 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
1564 (NB: This would require knowledge of the secret session ticket key
1565 to exploit, in which case you'd be SOL either way.)
1567 - Change bn_nist.c so that it will properly handle input BIGNUMs
1568 outside the expected range.
1570 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
1573 [Neel Mehta, Bodo Moeller]
1575 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
1576 the load fails. Useful for distros.
1577 [Ben Laurie and the FreeBSD team]
1579 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
1582 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
1585 *) Expand ENGINE to support engine supplied SSL client certificate functions.
1587 This work was sponsored by Logica.
1590 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
1591 keystores. Support for SSL/TLS client authentication too.
1592 Not compiled unless enable-capieng specified to Configure.
1594 This work was sponsored by Logica.
1597 *) Fix bug in X509_ATTRIBUTE creation: dont set attribute using
1598 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
1599 attribute creation routines such as certifcate requests and PKCS#12
1603 Changes between 0.9.8g and 0.9.8h [28 May 2008]
1605 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
1606 handshake which could lead to a cilent crash as found using the
1607 Codenomicon TLS test suite (CVE-2008-1672)
1608 [Steve Henson, Mark Cox]
1610 *) Fix double free in TLS server name extensions which could lead to
1611 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
1614 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
1616 Clear the error queue to ensure that error entries left from
1617 older function calls do not interfere with the correct operation.
1618 [Lutz Jaenicke, Erik de Castro Lopo]
1620 *) Remove root CA certificates of commercial CAs:
1622 The OpenSSL project does not recommend any specific CA and does not
1623 have any policy with respect to including or excluding any CA.
1624 Therefore it does not make any sense to ship an arbitrary selection
1625 of root CA certificates with the OpenSSL software.
1628 *) RSA OAEP patches to fix two separate invalid memory reads.
1629 The first one involves inputs when 'lzero' is greater than
1630 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
1631 before the beginning of from). The second one involves inputs where
1632 the 'db' section contains nothing but zeroes (there is a one-byte
1633 invalid read after the end of 'db').
1634 [Ivan Nestlerode <inestlerode@us.ibm.com>]
1636 *) Partial backport from 0.9.9-dev:
1638 Introduce bn_mul_mont (dedicated Montgomery multiplication
1639 procedure) as a candidate for BIGNUM assembler implementation.
1640 While 0.9.9-dev uses assembler for various architectures, only
1641 x86_64 is available by default here in the 0.9.8 branch, and
1642 32-bit x86 is available through a compile-time setting.
1644 To try the 32-bit x86 assembler implementation, use Configure
1645 option "enable-montasm" (which exists only for this backport).
1647 As "enable-montasm" for 32-bit x86 disclaims code stability
1648 anyway, in this constellation we activate additional code
1649 backported from 0.9.9-dev for further performance improvements,
1650 namely BN_from_montgomery_word. (To enable this otherwise,
1651 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
1653 [Andy Polyakov (backport partially by Bodo Moeller)]
1655 *) Add TLS session ticket callback. This allows an application to set
1656 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
1657 values. This is useful for key rollover for example where several key
1658 sets may exist with different names.
1661 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
1662 This was broken until now in 0.9.8 releases, such that the only way
1663 a registered ENGINE could be used (assuming it initialises
1664 successfully on the host) was to explicitly set it as the default
1665 for the relevant algorithms. This is in contradiction with 0.9.7
1666 behaviour and the documentation. With this fix, when an ENGINE is
1667 registered into a given algorithm's table of implementations, the
1668 'uptodate' flag is reset so that auto-discovery will be used next
1669 time a new context for that algorithm attempts to select an
1671 [Ian Lister (tweaked by Geoff Thorpe)]
1673 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
1674 implemention in the following ways:
1676 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
1679 Lack of BER streaming support means one pass streaming processing is
1680 only supported if data is detached: setting the streaming flag is
1681 ignored for embedded content.
1683 CMS support is disabled by default and must be explicitly enabled
1684 with the enable-cms configuration option.
1687 *) Update the GMP engine glue to do direct copies between BIGNUM and
1688 mpz_t when openssl and GMP use the same limb size. Otherwise the
1689 existing "conversion via a text string export" trick is still used.
1690 [Paul Sheer <paulsheer@gmail.com>]
1692 *) Zlib compression BIO. This is a filter BIO which compressed and
1693 uncompresses any data passed through it.
1696 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
1697 RFC3394 compatible AES key wrapping.
1700 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
1701 sets string data without copying. X509_ALGOR_set0() and
1702 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
1703 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
1704 from an X509_ATTRIBUTE structure optionally checking it occurs only
1705 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
1709 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
1710 to get the expected BN_FLG_CONSTTIME behavior.
1711 [Bodo Moeller (Google)]
1715 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
1716 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
1717 - added some more tests to do_tests.pl
1718 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
1719 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
1720 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
1721 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
1722 - various changes to netware.pl to enable gcc-cross builds on Win32
1724 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
1725 - various changes to fix missing prototype warnings
1726 - fixed x86nasm.pl to create correct asm files for NASM COFF output
1727 - added AES, WHIRLPOOL and CPUID assembler code to build files
1728 - added missing AES assembler make rules to mk1mf.pl
1729 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
1730 [Guenter Knauf <eflash@gmx.net>]
1732 *) Implement certificate status request TLS extension defined in RFC3546.
1733 A client can set the appropriate parameters and receive the encoded
1734 OCSP response via a callback. A server can query the supplied parameters
1735 and set the encoded OCSP response in the callback. Add simplified examples
1736 to s_client and s_server.
1739 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
1741 *) Fix various bugs:
1742 + Binary incompatibility of ssl_ctx_st structure
1743 + DTLS interoperation with non-compliant servers
1744 + Don't call get_session_cb() without proposed session
1745 + Fix ia64 assembler code
1746 [Andy Polyakov, Steve Henson]
1748 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
1750 *) DTLS Handshake overhaul. There were longstanding issues with
1751 OpenSSL DTLS implementation, which were making it impossible for
1752 RFC 4347 compliant client to communicate with OpenSSL server.
1753 Unfortunately just fixing these incompatibilities would "cut off"
1754 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
1755 server keeps tolerating non RFC compliant syntax. The opposite is
1756 not true, 0.9.8f client can not communicate with earlier server.
1757 This update even addresses CVE-2007-4995.
1760 *) Changes to avoid need for function casts in OpenSSL: some compilers
1761 (gcc 4.2 and later) reject their use.
1762 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
1765 *) Add RFC4507 support to OpenSSL. This includes the corrections in
1766 RFC4507bis. The encrypted ticket format is an encrypted encoded
1767 SSL_SESSION structure, that way new session features are automatically
1770 If a client application caches session in an SSL_SESSION structure
1771 support is transparent because tickets are now stored in the encoded
1774 The SSL_CTX structure automatically generates keys for ticket
1775 protection in servers so again support should be possible
1776 with no application modification.
1778 If a client or server wishes to disable RFC4507 support then the option
1779 SSL_OP_NO_TICKET can be set.
1781 Add a TLS extension debugging callback to allow the contents of any client
1782 or server extensions to be examined.
1784 This work was sponsored by Google.
1787 *) Add initial support for TLS extensions, specifically for the server_name
1788 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
1789 have new members for a host name. The SSL data structure has an
1790 additional member SSL_CTX *initial_ctx so that new sessions can be
1791 stored in that context to allow for session resumption, even after the
1792 SSL has been switched to a new SSL_CTX in reaction to a client's
1793 server_name extension.
1795 New functions (subject to change):
1797 SSL_get_servername()
1798 SSL_get_servername_type()
1801 New CTRL codes and macros (subject to change):
1803 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
1804 - SSL_CTX_set_tlsext_servername_callback()
1805 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
1806 - SSL_CTX_set_tlsext_servername_arg()
1807 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
1809 openssl s_client has a new '-servername ...' option.
1811 openssl s_server has new options '-servername_host ...', '-cert2 ...',
1812 '-key2 ...', '-servername_fatal' (subject to change). This allows
1813 testing the HostName extension for a specific single host name ('-cert'
1814 and '-key' remain fallbacks for handshakes without HostName
1815 negotiation). If the unrecogninzed_name alert has to be sent, this by
1816 default is a warning; it becomes fatal with the '-servername_fatal'
1819 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
1821 *) Add AES and SSE2 assembly language support to VC++ build.
1824 *) Mitigate attack on final subtraction in Montgomery reduction.
1827 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
1828 (which previously caused an internal error).
1831 *) Squeeze another 10% out of IGE mode when in != out.
1834 *) AES IGE mode speedup.
1835 [Dean Gaudet (Google)]
1837 *) Add the Korean symmetric 128-bit cipher SEED (see
1838 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
1839 add SEED ciphersuites from RFC 4162:
1841 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
1842 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
1843 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
1844 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
1846 To minimize changes between patchlevels in the OpenSSL 0.9.8
1847 series, SEED remains excluded from compilation unless OpenSSL
1848 is configured with 'enable-seed'.
1849 [KISA, Bodo Moeller]
1851 *) Mitigate branch prediction attacks, which can be practical if a
1852 single processor is shared, allowing a spy process to extract
1853 information. For detailed background information, see
1854 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
1855 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
1856 and Necessary Software Countermeasures"). The core of the change
1857 are new versions BN_div_no_branch() and
1858 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
1859 respectively, which are slower, but avoid the security-relevant
1860 conditional branches. These are automatically called by BN_div()
1861 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
1862 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
1863 remove a conditional branch.
1865 BN_FLG_CONSTTIME is the new name for the previous
1866 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
1867 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
1868 in the exponent causes BN_mod_exp_mont() to use the alternative
1869 implementation in BN_mod_exp_mont_consttime().) The old name
1870 remains as a deprecated alias.
1872 Similary, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
1873 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
1874 constant-time implementations for more than just exponentiation.
1875 Here too the old name is kept as a deprecated alias.
1877 BN_BLINDING_new() will now use BN_dup() for the modulus so that
1878 the BN_BLINDING structure gets an independent copy of the
1879 modulus. This means that the previous "BIGNUM *m" argument to
1880 BN_BLINDING_new() and to BN_BLINDING_create_param() now
1881 essentially becomes "const BIGNUM *m", although we can't actually
1882 change this in the header file before 0.9.9. It allows
1883 RSA_setup_blinding() to use BN_with_flags() on the modulus to
1884 enable BN_FLG_CONSTTIME.
1886 [Matthew D Wood (Intel Corp)]
1888 *) In the SSL/TLS server implementation, be strict about session ID
1889 context matching (which matters if an application uses a single
1890 external cache for different purposes). Previously,
1891 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
1892 set. This did ensure strict client verification, but meant that,
1893 with applications using a single external cache for quite
1894 different requirements, clients could circumvent ciphersuite
1895 restrictions for a given session ID context by starting a session
1896 in a different context.
1899 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
1900 a ciphersuite string such as "DEFAULT:RSA" cannot enable
1901 authentication-only ciphersuites.
1904 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
1905 not complete and could lead to a possible single byte overflow
1906 (CVE-2007-5135) [Ben Laurie]
1908 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
1910 *) Since AES128 and AES256 (and similarly Camellia128 and
1911 Camellia256) share a single mask bit in the logic of
1912 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
1913 kludge to work properly if AES128 is available and AES256 isn't
1914 (or if Camellia128 is available and Camellia256 isn't).
1917 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
1918 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
1919 When a point or a seed is encoded in a BIT STRING, we need to
1920 prevent the removal of trailing zero bits to get the proper DER
1921 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
1922 of a NamedBitList, for which trailing 0 bits need to be removed.)
1925 *) Have SSL/TLS server implementation tolerate "mismatched" record
1926 protocol version while receiving ClientHello even if the
1927 ClientHello is fragmented. (The server can't insist on the
1928 particular protocol version it has chosen before the ServerHello
1929 message has informed the client about his choice.)
1932 *) Add RFC 3779 support.
1933 [Rob Austein for ARIN, Ben Laurie]
1935 *) Load error codes if they are not already present instead of using a
1936 static variable. This allows them to be cleanly unloaded and reloaded.
1937 Improve header file function name parsing.
1940 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
1941 or CAPABILITY handshake as required by RFCs.
1944 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
1946 *) Introduce limits to prevent malicious keys being able to
1947 cause a denial of service. (CVE-2006-2940)
1948 [Steve Henson, Bodo Moeller]
1950 *) Fix ASN.1 parsing of certain invalid structures that can result
1951 in a denial of service. (CVE-2006-2937) [Steve Henson]
1953 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
1954 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
1956 *) Fix SSL client code which could crash if connecting to a
1957 malicious SSLv2 server. (CVE-2006-4343)
1958 [Tavis Ormandy and Will Drewry, Google Security Team]
1960 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
1961 match only those. Before that, "AES256-SHA" would be interpreted
1962 as a pattern and match "AES128-SHA" too (since AES128-SHA got
1963 the same strength classification in 0.9.7h) as we currently only
1964 have a single AES bit in the ciphersuite description bitmap.
1965 That change, however, also applied to ciphersuite strings such as
1966 "RC4-MD5" that intentionally matched multiple ciphersuites --
1967 namely, SSL 2.0 ciphersuites in addition to the more common ones
1968 from SSL 3.0/TLS 1.0.
1970 So we change the selection algorithm again: Naming an explicit
1971 ciphersuite selects this one ciphersuite, and any other similar
1972 ciphersuite (same bitmap) from *other* protocol versions.
1973 Thus, "RC4-MD5" again will properly select both the SSL 2.0
1974 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
1976 Since SSL 2.0 does not have any ciphersuites for which the
1977 128/256 bit distinction would be relevant, this works for now.
1978 The proper fix will be to use different bits for AES128 and
1979 AES256, which would have avoided the problems from the beginning;
1980 however, bits are scarce, so we can only do this in a new release
1981 (not just a patchlevel) when we can change the SSL_CIPHER
1982 definition to split the single 'unsigned long mask' bitmap into
1983 multiple values to extend the available space.
1987 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
1989 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
1990 (CVE-2006-4339) [Ben Laurie and Google Security Team]
1992 *) Add AES IGE and biIGE modes.
1995 *) Change the Unix randomness entropy gathering to use poll() when
1996 possible instead of select(), since the latter has some
1997 undesirable limitations.
1998 [Darryl Miles via Richard Levitte and Bodo Moeller]
2000 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
2001 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
2002 cannot be implicitly activated as part of, e.g., the "AES" alias.
2003 However, please upgrade to OpenSSL 0.9.9[-dev] for
2004 non-experimental use of the ECC ciphersuites to get TLS extension
2005 support, which is required for curve and point format negotiation
2006 to avoid potential handshake problems.
2009 *) Disable rogue ciphersuites:
2011 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
2012 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
2013 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
2015 The latter two were purportedly from
2016 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
2019 Also deactivate the remaining ciphersuites from
2020 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
2021 unofficial, and the ID has long expired.
2024 *) Fix RSA blinding Heisenbug (problems sometimes occured on
2025 dual-core machines) and other potential thread-safety issues.
2028 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
2029 versions), which is now available for royalty-free use
2030 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
2031 Also, add Camellia TLS ciphersuites from RFC 4132.
2033 To minimize changes between patchlevels in the OpenSSL 0.9.8
2034 series, Camellia remains excluded from compilation unless OpenSSL
2035 is configured with 'enable-camellia'.
2038 *) Disable the padding bug check when compression is in use. The padding
2039 bug check assumes the first packet is of even length, this is not
2040 necessarily true if compresssion is enabled and can result in false
2041 positives causing handshake failure. The actual bug test is ancient
2042 code so it is hoped that implementations will either have fixed it by
2043 now or any which still have the bug do not support compression.
2046 Changes between 0.9.8a and 0.9.8b [04 May 2006]
2048 *) When applying a cipher rule check to see if string match is an explicit
2049 cipher suite and only match that one cipher suite if it is.
2052 *) Link in manifests for VC++ if needed.
2053 [Austin Ziegler <halostatue@gmail.com>]
2055 *) Update support for ECC-based TLS ciphersuites according to
2056 draft-ietf-tls-ecc-12.txt with proposed changes (but without
2057 TLS extensions, which are supported starting with the 0.9.9
2058 branch, not in the OpenSSL 0.9.8 branch).
2061 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
2062 opaque EVP_CIPHER_CTX handling.
2065 *) Fixes and enhancements to zlib compression code. We now only use
2066 "zlib1.dll" and use the default __cdecl calling convention on Win32
2067 to conform with the standards mentioned here:
2068 http://www.zlib.net/DLL_FAQ.txt
2069 Static zlib linking now works on Windows and the new --with-zlib-include
2070 --with-zlib-lib options to Configure can be used to supply the location
2071 of the headers and library. Gracefully handle case where zlib library
2075 *) Several fixes and enhancements to the OID generation code. The old code
2076 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
2077 handle numbers larger than ULONG_MAX, truncated printing and had a
2078 non standard OBJ_obj2txt() behaviour.
2081 *) Add support for building of engines under engine/ as shared libraries
2082 under VC++ build system.
2085 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
2086 Hopefully, we will not see any false combination of paths any more.
2089 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
2091 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
2092 (part of SSL_OP_ALL). This option used to disable the
2093 countermeasure against man-in-the-middle protocol-version
2094 rollback in the SSL 2.0 server implementation, which is a bad
2095 idea. (CVE-2005-2969)
2097 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
2098 for Information Security, National Institute of Advanced Industrial
2099 Science and Technology [AIST], Japan)]
2101 *) Add two function to clear and return the verify parameter flags.
2104 *) Keep cipherlists sorted in the source instead of sorting them at
2105 runtime, thus removing the need for a lock.
2108 *) Avoid some small subgroup attacks in Diffie-Hellman.
2109 [Nick Mathewson and Ben Laurie]
2111 *) Add functions for well-known primes.
2114 *) Extended Windows CE support.
2115 [Satoshi Nakamura and Andy Polyakov]
2117 *) Initialize SSL_METHOD structures at compile time instead of during
2118 runtime, thus removing the need for a lock.
2121 *) Make PKCS7_decrypt() work even if no certificate is supplied by
2122 attempting to decrypt each encrypted key in turn. Add support to
2126 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
2128 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
2131 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
2134 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
2135 key into the same file any more.
2138 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
2141 *) Add -utf8 command line and config file option to 'ca'.
2142 [Stefan <stf@udoma.org]
2144 *) Removed the macro des_crypt(), as it seems to conflict with some
2145 libraries. Use DES_crypt().
2148 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
2149 involves renaming the source and generated shared-libs for
2150 both. The engines will accept the corrected or legacy ids
2151 ('ncipher' and '4758_cca' respectively) when binding. NB,
2152 this only applies when building 'shared'.
2153 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
2155 *) Add attribute functions to EVP_PKEY structure. Modify
2156 PKCS12_create() to recognize a CSP name attribute and
2157 use it. Make -CSP option work again in pkcs12 utility.
2160 *) Add new functionality to the bn blinding code:
2161 - automatic re-creation of the BN_BLINDING parameters after
2162 a fixed number of uses (currently 32)
2163 - add new function for parameter creation
2164 - introduce flags to control the update behaviour of the
2165 BN_BLINDING parameters
2166 - hide BN_BLINDING structure
2167 Add a second BN_BLINDING slot to the RSA structure to improve
2168 performance when a single RSA object is shared among several
2172 *) Add support for DTLS.
2173 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
2175 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
2176 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
2179 *) Remove buggy and incompletet DH cert support from
2180 ssl/ssl_rsa.c and ssl/s3_both.c
2183 *) Use SHA-1 instead of MD5 as the default digest algorithm for
2184 the apps/openssl applications.
2187 *) Compile clean with "-Wall -Wmissing-prototypes
2188 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
2189 DEBUG_SAFESTACK must also be set.
2192 *) Change ./Configure so that certain algorithms can be disabled by default.
2193 The new counterpiece to "no-xxx" is "enable-xxx".
2195 The patented RC5 and MDC2 algorithms will now be disabled unless
2196 "enable-rc5" and "enable-mdc2", respectively, are specified.
2198 (IDEA remains enabled despite being patented. This is because IDEA
2199 is frequently required for interoperability, and there is no license
2200 fee for non-commercial use. As before, "no-idea" can be used to
2201 avoid this algorithm.)
2205 *) Add processing of proxy certificates (see RFC 3820). This work was
2206 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
2207 EGEE (Enabling Grids for E-science in Europe).
2210 *) RC4 performance overhaul on modern architectures/implementations, such
2211 as Intel P4, IA-64 and AMD64.
2214 *) New utility extract-section.pl. This can be used specify an alternative
2215 section number in a pod file instead of having to treat each file as
2216 a separate case in Makefile. This can be done by adding two lines to the
2219 =for comment openssl_section:XXX
2221 The blank line is mandatory.
2225 *) New arguments -certform, -keyform and -pass for s_client and s_server
2226 to allow alternative format key and certificate files and passphrase
2230 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
2231 update associated structures and add various utility functions.
2233 Add new policy related verify parameters, include policy checking in
2234 standard verify code. Enhance 'smime' application with extra parameters
2235 to support policy checking and print out.
2238 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
2239 Nehemiah processors. These extensions support AES encryption in hardware
2240 as well as RNG (though RNG support is currently disabled).
2241 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
2243 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
2246 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
2247 [Andy Polyakov and a number of other people]
2249 *) Improved PowerPC platform support. Most notably BIGNUM assembler
2250 implementation contributed by IBM.
2251 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
2253 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
2254 exponent rather than 'unsigned long'. There is a corresponding change to
2255 the new 'rsa_keygen' element of the RSA_METHOD structure.
2256 [Jelte Jansen, Geoff Thorpe]
2258 *) Functionality for creating the initial serial number file is now
2259 moved from CA.pl to the 'ca' utility with a new option -create_serial.
2261 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
2262 number file to 1, which is bound to cause problems. To avoid
2263 the problems while respecting compatibility between different 0.9.7
2264 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
2265 CA.pl for serial number initialization. With the new release 0.9.8,
2266 we can fix the problem directly in the 'ca' utility.)
2269 *) Reduced header interdepencies by declaring more opaque objects in
2270 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
2271 give fewer recursive includes, which could break lazy source code - so
2272 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
2273 developers should define this symbol when building and using openssl to
2274 ensure they track the recommended behaviour, interfaces, [etc], but
2275 backwards-compatible behaviour prevails when this isn't defined.
2278 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
2281 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
2282 This will generate a random key of the appropriate length based on the
2283 cipher context. The EVP_CIPHER can provide its own random key generation
2284 routine to support keys of a specific form. This is used in the des and
2285 3des routines to generate a key of the correct parity. Update S/MIME
2286 code to use new functions and hence generate correct parity DES keys.
2287 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
2288 valid (weak or incorrect parity).
2291 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
2292 as looking them up. This is useful when the verified structure may contain
2293 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
2294 present unless the new PKCS7_NO_CRL flag is asserted.
2297 *) Extend ASN1 oid configuration module. It now additionally accepts the
2300 shortName = some long name, 1.2.3.4
2303 *) Reimplemented the BN_CTX implementation. There is now no more static
2304 limitation on the number of variables it can handle nor the depth of the
2305 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
2306 information can now expand as required, and rather than having a single
2307 static array of bignums, BN_CTX now uses a linked-list of such arrays
2308 allowing it to expand on demand whilst maintaining the usefulness of
2309 BN_CTX's "bundling".
2312 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
2313 to allow all RSA operations to function using a single BN_CTX.
2316 *) Preliminary support for certificate policy evaluation and checking. This
2317 is initially intended to pass the tests outlined in "Conformance Testing
2318 of Relying Party Client Certificate Path Processing Logic" v1.07.
2321 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
2322 remained unused and not that useful. A variety of other little bignum
2323 tweaks and fixes have also been made continuing on from the audit (see
2327 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
2328 associated ASN1, EVP and SSL functions and old ASN1 macros.
2331 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
2332 and this should never fail. So the return value from the use of
2333 BN_set_word() (which can fail due to needless expansion) is now deprecated;
2334 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
2337 *) BN_CTX_get() should return zero-valued bignums, providing the same
2338 initialised value as BN_new().
2339 [Geoff Thorpe, suggested by Ulf Möller]
2341 *) Support for inhibitAnyPolicy certificate extension.
2344 *) An audit of the BIGNUM code is underway, for which debugging code is
2345 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
2346 is considered valid when processing BIGNUMs, and causes execution to
2347 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
2348 further steps are taken to deliberately pollute unused data in BIGNUM
2349 structures to try and expose faulty code further on. For now, openssl will
2350 (in its default mode of operation) continue to tolerate the inconsistent
2351 forms that it has tolerated in the past, but authors and packagers should
2352 consider trying openssl and their own applications when compiled with
2353 these debugging symbols defined. It will help highlight potential bugs in
2354 their own code, and will improve the test coverage for OpenSSL itself. At
2355 some point, these tighter rules will become openssl's default to improve
2356 maintainability, though the assert()s and other overheads will remain only
2357 in debugging configurations. See bn.h for more details.
2358 [Geoff Thorpe, Nils Larsch, Ulf Möller]
2360 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
2361 that can only be obtained through BN_CTX_new() (which implicitly
2362 initialises it). The presence of this function only made it possible
2363 to overwrite an existing structure (and cause memory leaks).
2366 *) Because of the callback-based approach for implementing LHASH as a
2367 template type, lh_insert() adds opaque objects to hash-tables and
2368 lh_doall() or lh_doall_arg() are typically used with a destructor callback
2369 to clean up those corresponding objects before destroying the hash table
2370 (and losing the object pointers). So some over-zealous constifications in
2371 LHASH have been relaxed so that lh_insert() does not take (nor store) the
2372 objects as "const" and the lh_doall[_arg] callback wrappers are not
2373 prototyped to have "const" restrictions on the object pointers they are
2374 given (and so aren't required to cast them away any more).
2377 *) The tmdiff.h API was so ugly and minimal that our own timing utility
2378 (speed) prefers to use its own implementation. The two implementations
2379 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
2380 its object type properly exposed (MS_TM) instead of casting to/from "char
2381 *". This may still change yet if someone realises MS_TM and "ms_time_***"
2382 aren't necessarily the greatest nomenclatures - but this is what was used
2383 internally to the implementation so I've used that for now.
2386 *) Ensure that deprecated functions do not get compiled when
2387 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
2388 the self-tests were still using deprecated key-generation functions so
2389 these have been updated also.
2392 *) Reorganise PKCS#7 code to separate the digest location functionality
2393 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
2394 New function PKCS7_set_digest() to set the digest type for PKCS#7
2395 digestedData type. Add additional code to correctly generate the
2396 digestedData type and add support for this type in PKCS7 initialization
2400 *) New function PKCS7_set0_type_other() this initializes a PKCS7
2401 structure of type "other".
2404 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
2405 sure the loop does correctly stop and breaking ("division by zero")
2406 modulus operations are not performed. The (pre-generated) prime
2407 table crypto/bn/bn_prime.h was already correct, but it could not be
2408 re-generated on some platforms because of the "division by zero"
2409 situation in the script.
2410 [Ralf S. Engelschall]
2412 *) Update support for ECC-based TLS ciphersuites according to
2413 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
2414 SHA-1 now is only used for "small" curves (where the
2415 representation of a field element takes up to 24 bytes); for
2416 larger curves, the field element resulting from ECDH is directly
2417 used as premaster secret.
2418 [Douglas Stebila (Sun Microsystems Laboratories)]
2420 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
2421 curve secp160r1 to the tests.
2422 [Douglas Stebila (Sun Microsystems Laboratories)]
2424 *) Add the possibility to load symbols globally with DSO.
2425 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
2427 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
2428 control of the error stack.
2431 *) Add support for STORE in ENGINE.
2434 *) Add the STORE type. The intention is to provide a common interface
2435 to certificate and key stores, be they simple file-based stores, or
2436 HSM-type store, or LDAP stores, or...
2437 NOTE: The code is currently UNTESTED and isn't really used anywhere.
2440 *) Add a generic structure called OPENSSL_ITEM. This can be used to
2441 pass a list of arguments to any function as well as provide a way
2442 for a function to pass data back to the caller.
2445 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
2446 works like BUF_strdup() but can be used to duplicate a portion of
2447 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
2451 *) Add the function sk_find_ex() which works like sk_find(), but will
2452 return an index to an element even if an exact match couldn't be
2453 found. The index is guaranteed to point at the element where the
2454 searched-for key would be inserted to preserve sorting order.
2457 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
2458 takes an extra flags argument for optional functionality. Currently,
2459 the following flags are defined:
2461 OBJ_BSEARCH_VALUE_ON_NOMATCH
2462 This one gets OBJ_bsearch_ex() to return a pointer to the first
2463 element where the comparing function returns a negative or zero
2466 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
2467 This one gets OBJ_bsearch_ex() to return a pointer to the first
2468 element where the comparing function returns zero. This is useful
2469 if there are more than one element where the comparing function
2473 *) Make it possible to create self-signed certificates with 'openssl ca'
2474 in such a way that the self-signed certificate becomes part of the
2475 CA database and uses the same mechanisms for serial number generation
2476 as all other certificate signing. The new flag '-selfsign' enables
2477 this functionality. Adapt CA.sh and CA.pl.in.
2480 *) Add functionality to check the public key of a certificate request
2481 against a given private. This is useful to check that a certificate
2482 request can be signed by that key (self-signing).
2485 *) Make it possible to have multiple active certificates with the same
2486 subject in the CA index file. This is done only if the keyword
2487 'unique_subject' is set to 'no' in the main CA section (default
2488 if 'CA_default') of the configuration file. The value is saved
2489 with the database itself in a separate index attribute file,
2490 named like the index file with '.attr' appended to the name.
2493 *) Generate muti valued AVAs using '+' notation in config files for
2497 *) Support for nameConstraints certificate extension.
2500 *) Support for policyConstraints certificate extension.
2503 *) Support for policyMappings certificate extension.
2506 *) Make sure the default DSA_METHOD implementation only uses its
2507 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
2508 and change its own handlers to be NULL so as to remove unnecessary
2509 indirection. This lets alternative implementations fallback to the
2510 default implementation more easily.
2513 *) Support for directoryName in GeneralName related extensions
2517 *) Make it possible to link applications using Makefile.shared.
2518 Make that possible even when linking against static libraries!
2521 *) Support for single pass processing for S/MIME signing. This now
2522 means that S/MIME signing can be done from a pipe, in addition
2523 cleartext signing (multipart/signed type) is effectively streaming
2524 and the signed data does not need to be all held in memory.
2526 This is done with a new flag PKCS7_STREAM. When this flag is set
2527 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
2528 is done after the data is output (and digests calculated) in
2529 SMIME_write_PKCS7().
2532 *) Add full support for -rpath/-R, both in shared libraries and
2533 applications, at least on the platforms where it's known how
2537 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
2538 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
2539 will now compute a table of multiples of the generator that
2540 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
2541 faster (notably in the case of a single point multiplication,
2542 scalar * generator).
2543 [Nils Larsch, Bodo Moeller]
2545 *) IPv6 support for certificate extensions. The various extensions
2546 which use the IP:a.b.c.d can now take IPv6 addresses using the
2547 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
2551 *) Added an ENGINE that implements RSA by performing private key
2552 exponentiations with the GMP library. The conversions to and from
2553 GMP's mpz_t format aren't optimised nor are any montgomery forms
2554 cached, and on x86 it appears OpenSSL's own performance has caught up.
2555 However there are likely to be other architectures where GMP could
2556 provide a boost. This ENGINE is not built in by default, but it can be
2557 specified at Configure time and should be accompanied by the necessary
2558 linker additions, eg;
2559 ./config -DOPENSSL_USE_GMP -lgmp
2562 *) "openssl engine" will not display ENGINE/DSO load failure errors when
2563 testing availability of engines with "-t" - the old behaviour is
2564 produced by increasing the feature's verbosity with "-tt".
2567 *) ECDSA routines: under certain error conditions uninitialized BN objects
2568 could be freed. Solution: make sure initialization is performed early
2569 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
2573 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
2574 and DH_METHOD (eg. by ENGINE implementations) to override the normal
2575 software implementations. For DSA and DH, parameter generation can
2576 also be overriden by providing the appropriate method callbacks.
2579 *) Change the "progress" mechanism used in key-generation and
2580 primality testing to functions that take a new BN_GENCB pointer in
2581 place of callback/argument pairs. The new API functions have "_ex"
2582 postfixes and the older functions are reimplemented as wrappers for
2583 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
2584 declarations of the old functions to help (graceful) attempts to
2585 migrate to the new functions. Also, the new key-generation API
2586 functions operate on a caller-supplied key-structure and return
2587 success/failure rather than returning a key or NULL - this is to
2588 help make "keygen" another member function of RSA_METHOD etc.
2590 Example for using the new callback interface:
2592 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
2596 BN_GENCB_set(&my_cb, my_callback, my_arg);
2598 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
2599 /* For the meaning of a, b in calls to my_callback(), see the
2600 * documentation of the function that calls the callback.
2601 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
2602 * my_callback should return 1 if it wants BN_is_prime_ex()
2603 * to continue, or 0 to stop.
2608 *) Change the ZLIB compression method to be stateful, and make it
2609 available to TLS with the number defined in
2610 draft-ietf-tls-compression-04.txt.
2613 *) Add the ASN.1 structures and functions for CertificatePair, which
2614 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
2616 CertificatePair ::= SEQUENCE {
2617 forward [0] Certificate OPTIONAL,
2618 reverse [1] Certificate OPTIONAL,
2619 -- at least one of the pair shall be present -- }
2621 Also implement the PEM functions to read and write certificate
2622 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
2624 This needed to be defined, mostly for the sake of the LDAP
2625 attribute crossCertificatePair, but may prove useful elsewhere as
2629 *) Make it possible to inhibit symlinking of shared libraries in
2630 Makefile.shared, for Cygwin's sake.
2633 *) Extend the BIGNUM API by creating a function
2634 void BN_set_negative(BIGNUM *a, int neg);
2635 and a macro that behave like
2636 int BN_is_negative(const BIGNUM *a);
2638 to avoid the need to access 'a->neg' directly in applications.
2641 *) Implement fast modular reduction for pseudo-Mersenne primes
2642 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
2643 EC_GROUP_new_curve_GFp() will now automatically use this
2645 [Nils Larsch <nla@trustcenter.de>]
2647 *) Add new lock type (CRYPTO_LOCK_BN).
2650 *) Change the ENGINE framework to automatically load engines
2651 dynamically from specific directories unless they could be
2652 found to already be built in or loaded. Move all the
2653 current engines except for the cryptodev one to a new
2655 The engines in engines/ are built as shared libraries if
2656 the "shared" options was given to ./Configure or ./config.
2657 Otherwise, they are inserted in libcrypto.a.
2658 /usr/local/ssl/engines is the default directory for dynamic
2659 engines, but that can be overriden at configure time through
2660 the usual use of --prefix and/or --openssldir, and at run
2661 time with the environment variable OPENSSL_ENGINES.
2662 [Geoff Thorpe and Richard Levitte]
2664 *) Add Makefile.shared, a helper makefile to build shared
2665 libraries. Addapt Makefile.org.
2668 *) Add version info to Win32 DLLs.
2669 [Peter 'Luna' Runestig" <peter@runestig.com>]
2671 *) Add new 'medium level' PKCS#12 API. Certificates and keys
2672 can be added using this API to created arbitrary PKCS#12
2673 files while avoiding the low level API.
2675 New options to PKCS12_create(), key or cert can be NULL and
2676 will then be omitted from the output file. The encryption
2677 algorithm NIDs can be set to -1 for no encryption, the mac
2678 iteration count can be set to 0 to omit the mac.
2680 Enhance pkcs12 utility by making the -nokeys and -nocerts
2681 options work when creating a PKCS#12 file. New option -nomac
2682 to omit the mac, NONE can be set for an encryption algorithm.
2683 New code is modified to use the enhanced PKCS12_create()
2684 instead of the low level API.
2687 *) Extend ASN1 encoder to support indefinite length constructed
2688 encoding. This can output sequences tags and octet strings in
2689 this form. Modify pk7_asn1.c to support indefinite length
2690 encoding. This is experimental and needs additional code to
2691 be useful, such as an ASN1 bio and some enhanced streaming
2694 Extend template encode functionality so that tagging is passed
2695 down to the template encoder.
2698 *) Let 'openssl req' fail if an argument to '-newkey' is not
2699 recognized instead of using RSA as a default.
2702 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
2703 As these are not official, they are not included in "ALL";
2704 the "ECCdraft" ciphersuite group alias can be used to select them.
2705 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
2707 *) Add ECDH engine support.
2708 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
2710 *) Add ECDH in new directory crypto/ecdh/.
2711 [Douglas Stebila (Sun Microsystems Laboratories)]
2713 *) Let BN_rand_range() abort with an error after 100 iterations
2714 without success (which indicates a broken PRNG).
2717 *) Change BN_mod_sqrt() so that it verifies that the input value
2718 is really the square of the return value. (Previously,
2719 BN_mod_sqrt would show GIGO behaviour.)
2722 *) Add named elliptic curves over binary fields from X9.62, SECG,
2723 and WAP/WTLS; add OIDs that were still missing.
2725 [Sheueling Chang Shantz and Douglas Stebila
2726 (Sun Microsystems Laboratories)]
2728 *) Extend the EC library for elliptic curves over binary fields
2729 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
2732 EC_GF2m_simple_method
2736 EC_GROUP_new_curve_GF2m
2737 EC_GROUP_set_curve_GF2m
2738 EC_GROUP_get_curve_GF2m
2739 EC_POINT_set_affine_coordinates_GF2m
2740 EC_POINT_get_affine_coordinates_GF2m
2741 EC_POINT_set_compressed_coordinates_GF2m
2743 Point compression for binary fields is disabled by default for
2744 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
2747 As binary polynomials are represented as BIGNUMs, various members
2748 of the EC_GROUP and EC_POINT data structures can be shared
2749 between the implementations for prime fields and binary fields;
2750 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
2751 are essentially identical to their ..._GFp counterparts.
2752 (For simplicity, the '..._GFp' prefix has been dropped from
2753 various internal method names.)
2755 An internal 'field_div' method (similar to 'field_mul' and
2756 'field_sqr') has been added; this is used only for binary fields.
2758 [Sheueling Chang Shantz and Douglas Stebila
2759 (Sun Microsystems Laboratories)]
2761 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
2762 through methods ('mul', 'precompute_mult').
2764 The generic implementations (now internally called 'ec_wNAF_mul'
2765 and 'ec_wNAF_precomputed_mult') remain the default if these
2766 methods are undefined.
2768 [Sheueling Chang Shantz and Douglas Stebila
2769 (Sun Microsystems Laboratories)]
2771 *) New function EC_GROUP_get_degree, which is defined through
2772 EC_METHOD. For curves over prime fields, this returns the bit
2773 length of the modulus.
2775 [Sheueling Chang Shantz and Douglas Stebila
2776 (Sun Microsystems Laboratories)]
2778 *) New functions EC_GROUP_dup, EC_POINT_dup.
2779 (These simply call ..._new and ..._copy).
2781 [Sheueling Chang Shantz and Douglas Stebila
2782 (Sun Microsystems Laboratories)]
2784 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
2785 Polynomials are represented as BIGNUMs (where the sign bit is not
2786 used) in the following functions [macros]:
2789 BN_GF2m_sub [= BN_GF2m_add]
2790 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
2791 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
2792 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
2794 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
2795 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
2796 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
2797 BN_GF2m_cmp [= BN_ucmp]
2799 (Note that only the 'mod' functions are actually for fields GF(2^m).
2800 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
2802 For some functions, an the irreducible polynomial defining a
2803 field can be given as an 'unsigned int[]' with strictly
2804 decreasing elements giving the indices of those bits that are set;
2805 i.e., p[] represents the polynomial
2806 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
2808 p[0] > p[1] > ... > p[k] = 0.
2809 This applies to the following functions:
2814 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
2815 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
2817 BN_GF2m_mod_sqrt_arr
2818 BN_GF2m_mod_solve_quad_arr
2822 Conversion can be performed by the following functions:
2827 bntest.c has additional tests for binary polynomial arithmetic.
2829 Two implementations for BN_GF2m_mod_div() are available.
2830 The default algorithm simply uses BN_GF2m_mod_inv() and
2831 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
2832 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
2833 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
2835 [Sheueling Chang Shantz and Douglas Stebila
2836 (Sun Microsystems Laboratories)]
2838 *) Add new error code 'ERR_R_DISABLED' that can be used when some
2839 functionality is disabled at compile-time.
2840 [Douglas Stebila <douglas.stebila@sun.com>]
2842 *) Change default behaviour of 'openssl asn1parse' so that more
2843 information is visible when viewing, e.g., a certificate:
2845 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
2846 mode the content of non-printable OCTET STRINGs is output in a
2847 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
2848 avoid the appearance of a printable string.
2849 [Nils Larsch <nla@trustcenter.de>]
2851 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
2853 EC_GROUP_set_asn1_flag()
2854 EC_GROUP_get_asn1_flag()
2855 EC_GROUP_set_point_conversion_form()
2856 EC_GROUP_get_point_conversion_form()
2857 These control ASN1 encoding details:
2858 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
2859 has been set to OPENSSL_EC_NAMED_CURVE.
2860 - Points are encoded in uncompressed form by default; options for
2861 asn1_for are as for point2oct, namely
2862 POINT_CONVERSION_COMPRESSED
2863 POINT_CONVERSION_UNCOMPRESSED
2864 POINT_CONVERSION_HYBRID
2866 Also add 'seed' and 'seed_len' members to EC_GROUP with access
2869 EC_GROUP_get0_seed()
2870 EC_GROUP_get_seed_len()
2871 This is used only for ASN1 purposes (so far).
2872 [Nils Larsch <nla@trustcenter.de>]
2874 *) Add 'field_type' member to EC_METHOD, which holds the NID
2875 of the appropriate field type OID. The new function
2876 EC_METHOD_get_field_type() returns this value.
2877 [Nils Larsch <nla@trustcenter.de>]
2882 EC_POINT_point2hex()
2883 EC_POINT_hex2point()
2884 providing useful interfaces to EC_POINT_point2oct() and
2885 EC_POINT_oct2point().
2886 [Nils Larsch <nla@trustcenter.de>]
2888 *) Change internals of the EC library so that the functions
2889 EC_GROUP_set_generator()
2890 EC_GROUP_get_generator()
2891 EC_GROUP_get_order()
2892 EC_GROUP_get_cofactor()
2893 are implemented directly in crypto/ec/ec_lib.c and not dispatched
2894 to methods, which would lead to unnecessary code duplication when
2895 adding different types of curves.
2896 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
2898 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
2899 arithmetic, and such that modified wNAFs are generated
2900 (which avoid length expansion in many cases).
2903 *) Add a function EC_GROUP_check_discriminant() (defined via
2904 EC_METHOD) that verifies that the curve discriminant is non-zero.
2906 Add a function EC_GROUP_check() that makes some sanity tests
2907 on a EC_GROUP, its generator and order. This includes
2908 EC_GROUP_check_discriminant().
2909 [Nils Larsch <nla@trustcenter.de>]
2911 *) Add ECDSA in new directory crypto/ecdsa/.
2913 Add applications 'openssl ecparam' and 'openssl ecdsa'
2914 (these are based on 'openssl dsaparam' and 'openssl dsa').
2916 ECDSA support is also included in various other files across the
2917 library. Most notably,
2918 - 'openssl req' now has a '-newkey ecdsa:file' option;
2919 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
2920 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
2921 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
2922 them suitable for ECDSA where domain parameters must be
2923 extracted before the specific public key;
2924 - ECDSA engine support has been added.
2925 [Nils Larsch <nla@trustcenter.de>]
2927 *) Include some named elliptic curves, and add OIDs from X9.62,
2928 SECG, and WAP/WTLS. Each curve can be obtained from the new
2930 EC_GROUP_new_by_curve_name(),
2931 and the list of available named curves can be obtained with
2932 EC_get_builtin_curves().
2933 Also add a 'curve_name' member to EC_GROUP objects, which can be
2935 EC_GROUP_set_curve_name()
2936 EC_GROUP_get_curve_name()
2937 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
2939 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
2940 was actually never needed) and in BN_mul(). The removal in BN_mul()
2941 required a small change in bn_mul_part_recursive() and the addition
2942 of the functions bn_cmp_part_words(), bn_sub_part_words() and
2943 bn_add_part_words(), which do the same thing as bn_cmp_words(),
2944 bn_sub_words() and bn_add_words() except they take arrays with
2948 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
2950 *) Cleanse PEM buffers before freeing them since they may contain
2952 [Benjamin Bennett <ben@psc.edu>]
2954 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
2955 a ciphersuite string such as "DEFAULT:RSA" cannot enable
2956 authentication-only ciphersuites.
2959 *) Since AES128 and AES256 share a single mask bit in the logic of
2960 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
2961 kludge to work properly if AES128 is available and AES256 isn't.
2964 *) Expand security boundary to match 1.1.1 module.
2967 *) Remove redundant features: hash file source, editing of test vectors
2968 modify fipsld to use external fips_premain.c signature.
2971 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
2972 run algorithm test programs.
2975 *) Make algorithm test programs more tolerant of whitespace.
2978 *) Have SSL/TLS server implementation tolerate "mismatched" record
2979 protocol version while receiving ClientHello even if the
2980 ClientHello is fragmented. (The server can't insist on the
2981 particular protocol version it has chosen before the ServerHello
2982 message has informed the client about his choice.)
2985 *) Load error codes if they are not already present instead of using a
2986 static variable. This allows them to be cleanly unloaded and reloaded.
2989 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
2991 *) Introduce limits to prevent malicious keys being able to
2992 cause a denial of service. (CVE-2006-2940)
2993 [Steve Henson, Bodo Moeller]
2995 *) Fix ASN.1 parsing of certain invalid structures that can result
2996 in a denial of service. (CVE-2006-2937) [Steve Henson]
2998 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
2999 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
3001 *) Fix SSL client code which could crash if connecting to a
3002 malicious SSLv2 server. (CVE-2006-4343)
3003 [Tavis Ormandy and Will Drewry, Google Security Team]
3005 *) Change ciphersuite string processing so that an explicit
3006 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
3007 will no longer include "AES128-SHA"), and any other similar
3008 ciphersuite (same bitmap) from *other* protocol versions (so that
3009 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
3010 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
3011 changes from 0.9.8b and 0.9.8d.
3014 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
3016 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
3017 (CVE-2006-4339) [Ben Laurie and Google Security Team]
3019 *) Change the Unix randomness entropy gathering to use poll() when
3020 possible instead of select(), since the latter has some
3021 undesirable limitations.
3022 [Darryl Miles via Richard Levitte and Bodo Moeller]
3024 *) Disable rogue ciphersuites:
3026 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
3027 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
3028 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
3030 The latter two were purportedly from
3031 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
3034 Also deactive the remaining ciphersuites from
3035 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
3036 unofficial, and the ID has long expired.
3039 *) Fix RSA blinding Heisenbug (problems sometimes occured on
3040 dual-core machines) and other potential thread-safety issues.
3043 Changes between 0.9.7i and 0.9.7j [04 May 2006]
3045 *) Adapt fipsld and the build system to link against the validated FIPS
3046 module in FIPS mode.
3049 *) Fixes for VC++ 2005 build under Windows.
3052 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
3053 from a Windows bash shell such as MSYS. It is autodetected from the
3054 "config" script when run from a VC++ environment. Modify standard VC++
3055 build to use fipscanister.o from the GNU make build.
3058 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
3060 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
3061 The value now differs depending on if you build for FIPS or not.
3062 BEWARE! A program linked with a shared FIPSed libcrypto can't be
3063 safely run with a non-FIPSed libcrypto, as it may crash because of
3064 the difference induced by this change.
3067 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
3069 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
3070 (part of SSL_OP_ALL). This option used to disable the
3071 countermeasure against man-in-the-middle protocol-version
3072 rollback in the SSL 2.0 server implementation, which is a bad
3073 idea. (CVE-2005-2969)
3075 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
3076 for Information Security, National Institute of Advanced Industrial
3077 Science and Technology [AIST], Japan)]
3079 *) Minimal support for X9.31 signatures and PSS padding modes. This is
3080 mainly for FIPS compliance and not fully integrated at this stage.
3083 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
3084 the exponentiation using a fixed-length exponent. (Otherwise,
3085 the information leaked through timing could expose the secret key
3086 after many signatures; cf. Bleichenbacher's attack on DSA with
3090 *) Make a new fixed-window mod_exp implementation the default for
3091 RSA, DSA, and DH private-key operations so that the sequence of
3092 squares and multiplies and the memory access pattern are
3093 independent of the particular secret key. This will mitigate
3094 cache-timing and potential related attacks.
3096 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
3097 and this is automatically used by BN_mod_exp_mont() if the new flag
3098 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
3099 will use this BN flag for private exponents unless the flag
3100 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
3101 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
3103 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
3105 *) Change the client implementation for SSLv23_method() and
3106 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
3107 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
3108 (Previously, the SSL 2.0 backwards compatible Client Hello
3109 message format would be used even with SSL_OP_NO_SSLv2.)
3112 *) Add support for smime-type MIME parameter in S/MIME messages which some
3116 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
3117 a threadsafe manner. Modify rsa code to use new function and add calls
3118 to dsa and dh code (which had race conditions before).
3121 *) Include the fixed error library code in the C error file definitions
3122 instead of fixing them up at runtime. This keeps the error code
3123 structures constant.
3126 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
3128 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
3131 *) Fixes for newer kerberos headers. NB: the casts are needed because
3132 the 'length' field is signed on one version and unsigned on another
3133 with no (?) obvious way to tell the difference, without these VC++
3134 complains. Also the "definition" of FAR (blank) is no longer included
3135 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
3136 some needed definitions.
3139 *) Undo Cygwin change.
3142 *) Added support for proxy certificates according to RFC 3820.
3143 Because they may be a security thread to unaware applications,
3144 they must be explicitely allowed in run-time. See
3145 docs/HOWTO/proxy_certificates.txt for further information.
3148 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
3150 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
3151 server and client random values. Previously
3152 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
3153 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
3155 This change has negligible security impact because:
3157 1. Server and client random values still have 24 bytes of pseudo random
3160 2. Server and client random values are sent in the clear in the initial
3163 3. The master secret is derived using the premaster secret (48 bytes in
3164 size for static RSA ciphersuites) as well as client server and random
3167 The OpenSSL team would like to thank the UK NISCC for bringing this issue
3170 [Stephen Henson, reported by UK NISCC]
3172 *) Use Windows randomness collection on Cygwin.
3175 *) Fix hang in EGD/PRNGD query when communication socket is closed
3176 prematurely by EGD/PRNGD.
3177 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
3179 *) Prompt for pass phrases when appropriate for PKCS12 input format.
3182 *) Back-port of selected performance improvements from development
3183 branch, as well as improved support for PowerPC platforms.
3186 *) Add lots of checks for memory allocation failure, error codes to indicate
3187 failure and freeing up memory if a failure occurs.
3188 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
3190 *) Add new -passin argument to dgst.
3193 *) Perform some character comparisons of different types in X509_NAME_cmp:
3194 this is needed for some certificates that reencode DNs into UTF8Strings
3195 (in violation of RFC3280) and can't or wont issue name rollover
3199 *) Make an explicit check during certificate validation to see that
3200 the CA setting in each certificate on the chain is correct. As a
3201 side effect always do the following basic checks on extensions,
3202 not just when there's an associated purpose to the check:
3204 - if there is an unhandled critical extension (unless the user
3205 has chosen to ignore this fault)
3206 - if the path length has been exceeded (if one is set at all)
3207 - that certain extensions fit the associated purpose (if one has
3211 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
3213 *) Avoid a race condition when CRLs are checked in a multi threaded
3214 environment. This would happen due to the reordering of the revoked
3215 entries during signature checking and serial number lookup. Now the
3216 encoding is cached and the serial number sort performed under a lock.
3217 Add new STACK function sk_is_sorted().
3220 *) Add Delta CRL to the extension code.
3223 *) Various fixes to s3_pkt.c so alerts are sent properly.
3224 [David Holmes <d.holmes@f5.com>]
3226 *) Reduce the chances of duplicate issuer name and serial numbers (in
3227 violation of RFC3280) using the OpenSSL certificate creation utilities.
3228 This is done by creating a random 64 bit value for the initial serial
3229 number when a serial number file is created or when a self signed
3230 certificate is created using 'openssl req -x509'. The initial serial
3231 number file is created using 'openssl x509 -next_serial' in CA.pl
3232 rather than being initialized to 1.
3235 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
3237 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3238 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3239 [Joe Orton, Steve Henson]
3241 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
3243 [Joe Orton, Steve Henson]
3245 *) Make it possible to have multiple active certificates with the same
3246 subject in the CA index file. This is done only if the keyword
3247 'unique_subject' is set to 'no' in the main CA section (default
3248 if 'CA_default') of the configuration file. The value is saved
3249 with the database itself in a separate index attribute file,
3250 named like the index file with '.attr' appended to the name.
3253 *) X509 verify fixes. Disable broken certificate workarounds when
3254 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
3255 keyUsage extension present. Don't accept CRLs with unhandled critical
3256 extensions: since verify currently doesn't process CRL extensions this
3257 rejects a CRL with *any* critical extensions. Add new verify error codes
3261 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
3262 A clarification of RFC2560 will require the use of OCTET STRINGs and
3263 some implementations cannot handle the current raw format. Since OpenSSL
3264 copies and compares OCSP nonces as opaque blobs without any attempt at
3265 parsing them this should not create any compatibility issues.
3268 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
3269 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
3270 this HMAC (and other) operations are several times slower than OpenSSL
3274 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
3275 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
3277 *) Use the correct content when signing type "other".
3280 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
3282 *) Fix various bugs revealed by running the NISCC test suite:
3284 Stop out of bounds reads in the ASN1 code when presented with
3285 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3287 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
3289 If verify callback ignores invalid public key errors don't try to check
3290 certificate signature with the NULL public key.
3294 *) New -ignore_err option in ocsp application to stop the server
3295 exiting on the first error in a request.
3298 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3299 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3303 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3304 extra data after the compression methods not only for TLS 1.0
3305 but also for SSL 3.0 (as required by the specification).
3306 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3308 *) Change X509_certificate_type() to mark the key as exported/exportable
3309 when it's 512 *bits* long, not 512 bytes.
3312 *) Change AES_cbc_encrypt() so it outputs exact multiple of
3313 blocks during encryption.
3316 *) Various fixes to base64 BIO and non blocking I/O. On write
3317 flushes were not handled properly if the BIO retried. On read
3318 data was not being buffered properly and had various logic bugs.
3319 This also affects blocking I/O when the data being decoded is a
3323 *) Various S/MIME bugfixes and compatibility changes:
3324 output correct application/pkcs7 MIME type if
3325 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
3326 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
3327 of files as .eml work). Correctly handle very long lines in MIME
3331 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
3333 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3334 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3335 a protocol version number mismatch like a decryption error
3336 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3339 *) Turn on RSA blinding by default in the default implementation
3340 to avoid a timing attack. Applications that don't want it can call
3341 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3342 They would be ill-advised to do so in most cases.
3343 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3345 *) Change RSA blinding code so that it works when the PRNG is not
3346 seeded (in this case, the secret RSA exponent is abused as
3347 an unpredictable seed -- if it is not unpredictable, there
3348 is no point in blinding anyway). Make RSA blinding thread-safe
3349 by remembering the creator's thread ID in rsa->blinding and
3350 having all other threads use local one-time blinding factors
3351 (this requires more computation than sharing rsa->blinding, but
3352 avoids excessive locking; and if an RSA object is not shared
3353 between threads, blinding will still be very fast).
3356 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
3357 ENGINE as defaults for all supported algorithms irrespective of
3358 the 'flags' parameter. 'flags' is now honoured, so applications
3359 should make sure they are passing it correctly.
3362 *) Target "mingw" now allows native Windows code to be generated in
3363 the Cygwin environment as well as with the MinGW compiler.
3366 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
3368 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3369 via timing by performing a MAC computation even if incorrrect
3370 block cipher padding has been found. This is a countermeasure
3371 against active attacks where the attacker has to distinguish
3372 between bad padding and a MAC verification error. (CVE-2003-0078)
3374 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3375 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3376 Martin Vuagnoux (EPFL, Ilion)]
3378 *) Make the no-err option work as intended. The intention with no-err
3379 is not to have the whole error stack handling routines removed from
3380 libcrypto, it's only intended to remove all the function name and
3381 reason texts, thereby removing some of the footprint that may not
3382 be interesting if those errors aren't displayed anyway.
3384 NOTE: it's still possible for any application or module to have it's
3385 own set of error texts inserted. The routines are there, just not
3386 used by default when no-err is given.
3389 *) Add support for FreeBSD on IA64.
3390 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
3392 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
3393 Kerberos function mit_des_cbc_cksum(). Before this change,
3394 the value returned by DES_cbc_cksum() was like the one from
3395 mit_des_cbc_cksum(), except the bytes were swapped.
3396 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
3398 *) Allow an application to disable the automatic SSL chain building.
3399 Before this a rather primitive chain build was always performed in
3400 ssl3_output_cert_chain(): an application had no way to send the
3401 correct chain if the automatic operation produced an incorrect result.
3403 Now the chain builder is disabled if either:
3405 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
3407 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
3409 The reasoning behind this is that an application would not want the
3410 auto chain building to take place if extra chain certificates are
3411 present and it might also want a means of sending no additional
3412 certificates (for example the chain has two certificates and the
3416 *) Add the possibility to build without the ENGINE framework.
3417 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3419 *) Under Win32 gmtime() can return NULL: check return value in
3420 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
3423 *) DSA routines: under certain error conditions uninitialized BN objects
3424 could be freed. Solution: make sure initialization is performed early
3425 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
3426 Nils Larsch <nla@trustcenter.de> via PR#459)
3429 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
3430 checked on reconnect on the client side, therefore session resumption
3431 could still fail with a "ssl session id is different" error. This
3432 behaviour is masked when SSL_OP_ALL is used due to
3433 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
3434 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3435 followup to PR #377.
3438 *) IA-32 assembler support enhancements: unified ELF targets, support
3439 for SCO/Caldera platforms, fix for Cygwin shared build.
3442 *) Add support for FreeBSD on sparc64. As a consequence, support for
3443 FreeBSD on non-x86 processors is separate from x86 processors on
3444 the config script, much like the NetBSD support.
3445 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
3447 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
3449 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
3452 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
3453 code (06) was taken as the first octet of the session ID and the last
3454 octet was ignored consequently. As a result SSLv2 client side session
3455 caching could not have worked due to the session ID mismatch between
3457 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
3461 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
3462 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
3466 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
3467 seems that in spite of existing for more than a year, many application
3468 author have done nothing to provide the necessary callbacks, which
3469 means that this particular engine will not work properly anywhere.
3470 This is a very unfortunate situation which forces us, in the name
3471 of usability, to give the hw_ncipher.c a static lock, which is part
3473 NOTE: This is for the 0.9.7 series ONLY. This hack will never
3474 appear in 0.9.8 or later. We EXPECT application authors to have
3475 dealt properly with this when 0.9.8 is released (unless we actually
3476 make such changes in the libcrypto locking code that changes will
3477 have to be made anyway).
3480 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
3481 octets have been read, EOF or an error occurs. Without this change
3482 some truncated ASN1 structures will not produce an error.
3485 *) Disable Heimdal support, since it hasn't been fully implemented.
3486 Still give the possibility to force the use of Heimdal, but with
3487 warnings and a request that patches get sent to openssl-dev.
3490 *) Add the VC-CE target, introduce the WINCE sysname, and add
3491 INSTALL.WCE and appropriate conditionals to make it build.
3492 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
3494 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
3495 cygssl-x.y.z.dll, where x, y and z are the major, minor and
3496 edit numbers of the version.
3497 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3499 *) Introduce safe string copy and catenation functions
3500 (BUF_strlcpy() and BUF_strlcat()).
3501 [Ben Laurie (CHATS) and Richard Levitte]
3503 *) Avoid using fixed-size buffers for one-line DNs.
3504 [Ben Laurie (CHATS)]
3506 *) Add BUF_MEM_grow_clean() to avoid information leakage when
3507 resizing buffers containing secrets, and use where appropriate.
3508 [Ben Laurie (CHATS)]
3510 *) Avoid using fixed size buffers for configuration file location.
3511 [Ben Laurie (CHATS)]
3513 *) Avoid filename truncation for various CA files.
3514 [Ben Laurie (CHATS)]
3516 *) Use sizeof in preference to magic numbers.
3517 [Ben Laurie (CHATS)]
3519 *) Avoid filename truncation in cert requests.
3520 [Ben Laurie (CHATS)]
3522 *) Add assertions to check for (supposedly impossible) buffer
3524 [Ben Laurie (CHATS)]
3526 *) Don't cache truncated DNS entries in the local cache (this could
3527 potentially lead to a spoofing attack).
3528 [Ben Laurie (CHATS)]
3530 *) Fix various buffers to be large enough for hex/decimal
3531 representations in a platform independent manner.
3532 [Ben Laurie (CHATS)]
3534 *) Add CRYPTO_realloc_clean() to avoid information leakage when
3535 resizing buffers containing secrets, and use where appropriate.
3536 [Ben Laurie (CHATS)]
3538 *) Add BIO_indent() to avoid much slightly worrying code to do
3540 [Ben Laurie (CHATS)]
3542 *) Convert sprintf()/BIO_puts() to BIO_printf().
3543 [Ben Laurie (CHATS)]
3545 *) buffer_gets() could terminate with the buffer only half
3547 [Ben Laurie (CHATS)]
3549 *) Add assertions to prevent user-supplied crypto functions from
3550 overflowing internal buffers by having large block sizes, etc.
3551 [Ben Laurie (CHATS)]
3553 *) New OPENSSL_assert() macro (similar to assert(), but enabled
3555 [Ben Laurie (CHATS)]
3557 *) Eliminate unused copy of key in RC4.
3558 [Ben Laurie (CHATS)]
3560 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
3561 [Ben Laurie (CHATS)]
3563 *) Fix off-by-one error in EGD path.
3564 [Ben Laurie (CHATS)]
3566 *) If RANDFILE path is too long, ignore instead of truncating.
3567 [Ben Laurie (CHATS)]
3569 *) Eliminate unused and incorrectly sized X.509 structure
3571 [Ben Laurie (CHATS)]
3573 *) Eliminate unused and dangerous function knumber().
3574 [Ben Laurie (CHATS)]
3576 *) Eliminate unused and dangerous structure, KSSL_ERR.
3577 [Ben Laurie (CHATS)]
3579 *) Protect against overlong session ID context length in an encoded
3580 session object. Since these are local, this does not appear to be
3582 [Ben Laurie (CHATS)]
3584 *) Change from security patch (see 0.9.6e below) that did not affect
3585 the 0.9.6 release series:
3587 Remote buffer overflow in SSL3 protocol - an attacker could
3588 supply an oversized master key in Kerberos-enabled versions.
3590 [Ben Laurie (CHATS)]
3592 *) Change the SSL kerb5 codes to match RFC 2712.
3595 *) Make -nameopt work fully for req and add -reqopt switch.
3596 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
3598 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
3599 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
3601 *) Make sure tests can be performed even if the corresponding algorithms
3602 have been removed entirely. This was also the last step to make
3603 OpenSSL compilable with DJGPP under all reasonable conditions.
3604 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
3606 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
3607 to allow version independent disabling of normally unselected ciphers,
3608 which may be activated as a side-effect of selecting a single cipher.
3610 (E.g., cipher list string "RSA" enables ciphersuites that are left
3611 out of "ALL" because they do not provide symmetric encryption.
3612 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
3613 [Lutz Jaenicke, Bodo Moeller]
3615 *) Add appropriate support for separate platform-dependent build
3616 directories. The recommended way to make a platform-dependent
3617 build directory is the following (tested on Linux), maybe with
3620 # Place yourself outside of the OpenSSL source tree. In
3621 # this example, the environment variable OPENSSL_SOURCE
3622 # is assumed to contain the absolute OpenSSL source directory.
3623 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
3624 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
3625 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
3626 mkdir -p `dirname $F`
3627 ln -s $OPENSSL_SOURCE/$F $F
3630 To be absolutely sure not to disturb the source tree, a "make clean"
3631 is a good thing. If it isn't successfull, don't worry about it,
3632 it probably means the source directory is very clean.
3635 *) Make sure any ENGINE control commands make local copies of string
3636 pointers passed to them whenever necessary. Otherwise it is possible
3637 the caller may have overwritten (or deallocated) the original string
3638 data when a later ENGINE operation tries to use the stored values.
3639 [Götz Babin-Ebell <babinebell@trustcenter.de>]
3641 *) Improve diagnostics in file reading and command-line digests.
3642 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
3644 *) Add AES modes CFB and OFB to the object database. Correct an
3645 error in AES-CFB decryption.
3648 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
3649 allows existing EVP_CIPHER_CTX structures to be reused after
3650 calling EVP_*Final(). This behaviour is used by encryption
3651 BIOs and some applications. This has the side effect that
3652 applications must explicitly clean up cipher contexts with
3653 EVP_CIPHER_CTX_cleanup() or they will leak memory.
3656 *) Check the values of dna and dnb in bn_mul_recursive before calling
3657 bn_mul_comba (a non zero value means the a or b arrays do not contain
3658 n2 elements) and fallback to bn_mul_normal if either is not zero.
3661 *) Fix escaping of non-ASCII characters when using the -subj option
3662 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
3665 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
3666 form for "surname", serialNumber has no short form.
3667 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
3668 therefore remove "mail" short name for "internet 7".
3669 The OID for unique identifiers in X509 certificates is
3670 x500UniqueIdentifier, not uniqueIdentifier.
3671 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
3674 *) Add an "init" command to the ENGINE config module and auto initialize
3675 ENGINEs. Without any "init" command the ENGINE will be initialized
3676 after all ctrl commands have been executed on it. If init=1 the
3677 ENGINE is initailized at that point (ctrls before that point are run
3678 on the uninitialized ENGINE and after on the initialized one). If
3679 init=0 then the ENGINE will not be iniatialized at all.
3682 *) Fix the 'app_verify_callback' interface so that the user-defined
3683 argument is actually passed to the callback: In the
3684 SSL_CTX_set_cert_verify_callback() prototype, the callback
3685 declaration has been changed from
3688 int (*cb)(X509_STORE_CTX *,void *);
3689 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
3690 i=s->ctx->app_verify_callback(&ctx)
3691 has been changed into
3692 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
3694 To update applications using SSL_CTX_set_cert_verify_callback(),
3695 a dummy argument can be added to their callback functions.
3696 [D. K. Smetters <smetters@parc.xerox.com>]
3698 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
3699 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
3701 *) Add and OPENSSL_LOAD_CONF define which will cause
3702 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
3703 This allows older applications to transparently support certain
3704 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
3705 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
3706 load the config file and OPENSSL_add_all_algorithms_conf() which will
3707 always load it have also been added.
3710 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
3711 Adjust NIDs and EVP layer.
3712 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
3714 *) Config modules support in openssl utility.
3716 Most commands now load modules from the config file,
3717 though in a few (such as version) this isn't done
3718 because it couldn't be used for anything.
3720 In the case of ca and req the config file used is
3721 the same as the utility itself: that is the -config
3722 command line option can be used to specify an
3726 *) Move default behaviour from OPENSSL_config(). If appname is NULL
3727 use "openssl_conf" if filename is NULL use default openssl config file.
3730 *) Add an argument to OPENSSL_config() to allow the use of an alternative
3731 config section name. Add a new flag to tolerate a missing config file
3732 and move code to CONF_modules_load_file().
3735 *) Support for crypto accelerator cards from Accelerated Encryption
3736 Processing, www.aep.ie. (Use engine 'aep')
3737 The support was copied from 0.9.6c [engine] and adapted/corrected
3738 to work with the new engine framework.
3739 [AEP Inc. and Richard Levitte]
3741 *) Support for SureWare crypto accelerator cards from Baltimore
3742 Technologies. (Use engine 'sureware')
3743 The support was copied from 0.9.6c [engine] and adapted
3744 to work with the new engine framework.
3747 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
3748 make the newer ENGINE framework commands for the CHIL engine work.
3749 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
3751 *) Make it possible to produce shared libraries on ReliantUNIX.
3752 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
3754 *) Add the configuration target debug-linux-ppro.
3755 Make 'openssl rsa' use the general key loading routines
3756 implemented in apps.c, and make those routines able to
3757 handle the key format FORMAT_NETSCAPE and the variant
3759 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3761 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3762 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3764 *) Add -keyform to rsautl, and document -engine.
3765 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
3767 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
3768 BIO_R_NO_SUCH_FILE error code rather than the generic
3769 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
3772 *) Add new functions
3774 ERR_peek_last_error_line
3775 ERR_peek_last_error_line_data.
3776 These are similar to
3779 ERR_peek_error_line_data,
3780 but report on the latest error recorded rather than the first one
3781 still in the error queue.
3782 [Ben Laurie, Bodo Moeller]
3784 *) default_algorithms option in ENGINE config module. This allows things
3786 default_algorithms = ALL
3787 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
3790 *) Prelminary ENGINE config module.
3793 *) New experimental application configuration code.
3796 *) Change the AES code to follow the same name structure as all other
3797 symmetric ciphers, and behave the same way. Move everything to
3798 the directory crypto/aes, thereby obsoleting crypto/rijndael.
3799 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
3801 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
3802 [Ben Laurie and Theo de Raadt]
3804 *) Add option to output public keys in req command.
3805 [Massimiliano Pala madwolf@openca.org]
3807 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
3808 (up to about 10% better than before for P-192 and P-224).
3811 *) New functions/macros
3813 SSL_CTX_set_msg_callback(ctx, cb)
3814 SSL_CTX_set_msg_callback_arg(ctx, arg)
3815 SSL_set_msg_callback(ssl, cb)
3816 SSL_set_msg_callback_arg(ssl, arg)
3818 to request calling a callback function
3820 void cb(int write_p, int version, int content_type,
3821 const void *buf, size_t len, SSL *ssl, void *arg)
3823 whenever a protocol message has been completely received
3824 (write_p == 0) or sent (write_p == 1). Here 'version' is the
3825 protocol version according to which the SSL library interprets
3826 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
3827 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
3828 the content type as defined in the SSL 3.0/TLS 1.0 protocol
3829 specification (change_cipher_spec(20), alert(21), handshake(22)).
3830 'buf' and 'len' point to the actual message, 'ssl' to the
3831 SSL object, and 'arg' is the application-defined value set by
3832 SSL[_CTX]_set_msg_callback_arg().
3834 'openssl s_client' and 'openssl s_server' have new '-msg' options
3835 to enable a callback that displays all protocol messages.
3838 *) Change the shared library support so shared libraries are built as
3839 soon as the corresponding static library is finished, and thereby get
3840 openssl and the test programs linked against the shared library.
3841 This still only happens when the keyword "shard" has been given to
3842 the configuration scripts.
3844 NOTE: shared library support is still an experimental thing, and
3845 backward binary compatibility is still not guaranteed.
3846 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
3848 *) Add support for Subject Information Access extension.
3849 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
3851 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
3852 additional bytes when new memory had to be allocated, not just
3853 when reusing an existing buffer.
3856 *) New command line and configuration option 'utf8' for the req command.
3857 This allows field values to be specified as UTF8 strings.
3860 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
3861 runs for the former and machine-readable output for the latter.
3864 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
3865 of the e-mail address in the DN (i.e., it will go into a certificate
3866 extension only). The new configuration file option 'email_in_dn = no'
3867 has the same effect.
3868 [Massimiliano Pala madwolf@openca.org]
3870 *) Change all functions with names starting with des_ to be starting
3871 with DES_ instead. Add wrappers that are compatible with libdes,
3872 but are named _ossl_old_des_*. Finally, add macros that map the
3873 des_* symbols to the corresponding _ossl_old_des_* if libdes
3874 compatibility is desired. If OpenSSL 0.9.6c compatibility is
3875 desired, the des_* symbols will be mapped to DES_*, with one
3878 Since we provide two compatibility mappings, the user needs to
3879 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
3880 compatibility is desired. The default (i.e., when that macro
3881 isn't defined) is OpenSSL 0.9.6c compatibility.
3883 There are also macros that enable and disable the support of old
3884 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
3885 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
3886 are defined, the default will apply: to support the old des routines.
3888 In either case, one must include openssl/des.h to get the correct
3889 definitions. Do not try to just include openssl/des_old.h, that
3892 NOTE: This is a major break of an old API into a new one. Software
3893 authors are encouraged to switch to the DES_ style functions. Some
3894 time in the future, des_old.h and the libdes compatibility functions
3895 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
3896 default), and then completely removed.
3899 *) Test for certificates which contain unsupported critical extensions.
3900 If such a certificate is found during a verify operation it is
3901 rejected by default: this behaviour can be overridden by either
3902 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
3903 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
3904 X509_supported_extension() has also been added which returns 1 if a
3905 particular extension is supported.
3908 *) Modify the behaviour of EVP cipher functions in similar way to digests
3909 to retain compatibility with existing code.
3912 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
3913 compatibility with existing code. In particular the 'ctx' parameter does
3914 not have to be to be initialized before the call to EVP_DigestInit() and
3915 it is tidied up after a call to EVP_DigestFinal(). New function
3916 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
3917 EVP_MD_CTX_copy() changed to not require the destination to be
3918 initialized valid and new function EVP_MD_CTX_copy_ex() added which
3919 requires the destination to be valid.
3921 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
3922 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
3925 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
3926 so that complete 'Handshake' protocol structures are kept in memory
3927 instead of overwriting 'msg_type' and 'length' with 'body' data.
3930 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
3931 [Massimo Santin via Richard Levitte]
3933 *) Major restructuring to the underlying ENGINE code. This includes
3934 reduction of linker bloat, separation of pure "ENGINE" manipulation
3935 (initialisation, etc) from functionality dealing with implementations
3936 of specific crypto iterfaces. This change also introduces integrated
3937 support for symmetric ciphers and digest implementations - so ENGINEs
3938 can now accelerate these by providing EVP_CIPHER and EVP_MD
3939 implementations of their own. This is detailed in crypto/engine/README
3940 as it couldn't be adequately described here. However, there are a few
3941 API changes worth noting - some RSA, DSA, DH, and RAND functions that
3942 were changed in the original introduction of ENGINE code have now
3943 reverted back - the hooking from this code to ENGINE is now a good
3944 deal more passive and at run-time, operations deal directly with
3945 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
3946 dereferencing through an ENGINE pointer any more. Also, the ENGINE
3947 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
3948 they were not being used by the framework as there is no concept of a
3949 BIGNUM_METHOD and they could not be generalised to the new
3950 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
3951 ENGINE_cpy() has been removed as it cannot be consistently defined in
3955 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
3958 *) Change mkdef.pl to sort symbols that get the same entry number,
3959 and make sure the automatically generated functions ERR_load_*
3960 become part of libeay.num as well.
3963 *) New function SSL_renegotiate_pending(). This returns true once
3964 renegotiation has been requested (either SSL_renegotiate() call
3965 or HelloRequest/ClientHello receveived from the peer) and becomes
3966 false once a handshake has been completed.
3967 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
3968 sends a HelloRequest, but does not ensure that a handshake takes
3969 place. SSL_renegotiate_pending() is useful for checking if the
3970 client has followed the request.)
3973 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
3974 By default, clients may request session resumption even during
3975 renegotiation (if session ID contexts permit); with this option,
3976 session resumption is possible only in the first handshake.
3978 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
3979 more bits available for options that should not be part of
3980 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
3983 *) Add some demos for certificate and certificate request creation.
3986 *) Make maximum certificate chain size accepted from the peer application
3987 settable (SSL*_get/set_max_cert_list()), as proposed by
3988 "Douglas E. Engert" <deengert@anl.gov>.
3991 *) Add support for shared libraries for Unixware-7
3992 (Boyd Lynn Gerber <gerberb@zenez.com>).
3995 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
3996 be done prior to destruction. Use this to unload error strings from
3997 ENGINEs that load their own error strings. NB: This adds two new API
3998 functions to "get" and "set" this destroy handler in an ENGINE.
4001 *) Alter all existing ENGINE implementations (except "openssl" and
4002 "openbsd") to dynamically instantiate their own error strings. This
4003 makes them more flexible to be built both as statically-linked ENGINEs
4004 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
4005 Also, add stub code to each that makes building them as self-contained
4006 shared-libraries easier (see README.ENGINE).
4009 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
4010 implementations into applications that are completely implemented in
4011 self-contained shared-libraries. The "dynamic" ENGINE exposes control
4012 commands that can be used to configure what shared-library to load and
4013 to control aspects of the way it is handled. Also, made an update to
4014 the README.ENGINE file that brings its information up-to-date and
4015 provides some information and instructions on the "dynamic" ENGINE
4016 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
4019 *) Make it possible to unload ranges of ERR strings with a new
4020 "ERR_unload_strings" function.
4023 *) Add a copy() function to EVP_MD.
4026 *) Make EVP_MD routines take a context pointer instead of just the
4027 md_data void pointer.
4030 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
4031 that the digest can only process a single chunk of data
4032 (typically because it is provided by a piece of
4033 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
4034 is only going to provide a single chunk of data, and hence the
4035 framework needn't accumulate the data for oneshot drivers.
4038 *) As with "ERR", make it possible to replace the underlying "ex_data"
4039 functions. This change also alters the storage and management of global
4040 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
4041 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
4042 index counters. The API functions that use this state have been changed
4043 to take a "class_index" rather than pointers to the class's local STACK
4044 and counter, and there is now an API function to dynamically create new
4045 classes. This centralisation allows us to (a) plug a lot of the
4046 thread-safety problems that existed, and (b) makes it possible to clean
4047 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
4048 such data would previously have always leaked in application code and
4049 workarounds were in place to make the memory debugging turn a blind eye
4050 to it. Application code that doesn't use this new function will still
4051 leak as before, but their memory debugging output will announce it now
4052 rather than letting it slide.
4054 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
4055 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
4056 has a return value to indicate success or failure.
4059 *) Make it possible to replace the underlying "ERR" functions such that the
4060 global state (2 LHASH tables and 2 locks) is only used by the "default"
4061 implementation. This change also adds two functions to "get" and "set"
4062 the implementation prior to it being automatically set the first time
4063 any other ERR function takes place. Ie. an application can call "get",
4064 pass the return value to a module it has just loaded, and that module
4065 can call its own "set" function using that value. This means the
4066 module's "ERR" operations will use (and modify) the error state in the
4067 application and not in its own statically linked copy of OpenSSL code.
4070 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
4071 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
4072 the operation, and provides a more encapsulated way for external code
4073 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
4074 to use these functions rather than manually incrementing the counts.
4076 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
4079 *) Add EVP test program.
4082 *) Add symmetric cipher support to ENGINE. Expect the API to change!
4085 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
4086 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
4087 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
4088 These allow a CRL to be built without having to access X509_CRL fields
4089 directly. Modify 'ca' application to use new functions.
4092 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
4093 bug workarounds. Rollback attack detection is a security feature.
4094 The problem will only arise on OpenSSL servers when TLSv1 is not
4095 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
4096 Software authors not wanting to support TLSv1 will have special reasons
4097 for their choice and can explicitly enable this option.
4098 [Bodo Moeller, Lutz Jaenicke]
4100 *) Rationalise EVP so it can be extended: don't include a union of
4101 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
4102 (similar to those existing for EVP_CIPHER_CTX).
4107 EVP_MD_CTX_init(&md); /* new function call */
4108 EVP_DigestInit(&md, EVP_sha1());
4109 EVP_DigestUpdate(&md, in, len);
4110 EVP_DigestFinal(&md, out, NULL);
4111 EVP_MD_CTX_cleanup(&md); /* new function call */
4115 *) Make DES key schedule conform to the usual scheme, as well as
4116 correcting its structure. This means that calls to DES functions
4117 now have to pass a pointer to a des_key_schedule instead of a
4118 plain des_key_schedule (which was actually always a pointer
4121 des_key_schedule ks;
4123 des_set_key_checked(..., &ks);
4124 des_ncbc_encrypt(..., &ks, ...);
4126 (Note that a later change renames 'des_...' into 'DES_...'.)
4129 *) Initial reduction of linker bloat: the use of some functions, such as
4130 PEM causes large amounts of unused functions to be linked in due to
4131 poor organisation. For example pem_all.c contains every PEM function
4132 which has a knock on effect of linking in large amounts of (unused)
4133 ASN1 code. Grouping together similar functions and splitting unrelated
4134 functions prevents this.
4137 *) Cleanup of EVP macros.
4140 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
4141 correct _ecb suffix.
4144 *) Add initial OCSP responder support to ocsp application. The
4145 revocation information is handled using the text based index
4146 use by the ca application. The responder can either handle
4147 requests generated internally, supplied in files (for example
4148 via a CGI script) or using an internal minimal server.
4151 *) Add configuration choices to get zlib compression for TLS.
4154 *) Changes to Kerberos SSL for RFC 2712 compliance:
4155 1. Implemented real KerberosWrapper, instead of just using
4156 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
4157 2. Implemented optional authenticator field of KerberosWrapper.
4159 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
4160 and authenticator structs; see crypto/krb5/.
4162 Generalized Kerberos calls to support multiple Kerberos libraries.
4163 [Vern Staats <staatsvr@asc.hpc.mil>,
4164 Jeffrey Altman <jaltman@columbia.edu>
4165 via Richard Levitte]
4167 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
4168 already does with RSA. testdsa.h now has 'priv_key/pub_key'
4169 values for each of the key sizes rather than having just
4170 parameters (and 'speed' generating keys each time).
4173 *) Speed up EVP routines.
4176 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
4177 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
4178 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
4179 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
4181 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
4182 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
4183 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
4186 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
4188 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
4191 *) Added the OS2-EMX target.
4192 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
4194 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
4195 to support NCONF routines in extension code. New function CONF_set_nconf()
4196 to allow functions which take an NCONF to also handle the old LHASH
4197 structure: this means that the old CONF compatible routines can be
4198 retained (in particular wrt extensions) without having to duplicate the
4199 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
4202 *) Enhance the general user interface with mechanisms for inner control
4203 and with possibilities to have yes/no kind of prompts.
4206 *) Change all calls to low level digest routines in the library and
4207 applications to use EVP. Add missing calls to HMAC_cleanup() and
4208 don't assume HMAC_CTX can be copied using memcpy().
4209 [Verdon Walker <VWalker@novell.com>, Steve Henson]
4211 *) Add the possibility to control engines through control names but with
4212 arbitrary arguments instead of just a string.
4213 Change the key loaders to take a UI_METHOD instead of a callback
4214 function pointer. NOTE: this breaks binary compatibility with earlier
4215 versions of OpenSSL [engine].
4216 Adapt the nCipher code for these new conditions and add a card insertion
4220 *) Enhance the general user interface with mechanisms to better support
4221 dialog box interfaces, application-defined prompts, the possibility
4222 to use defaults (for example default passwords from somewhere else)
4223 and interrupts/cancellations.
4226 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
4227 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
4230 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
4231 tidy up some unnecessarily weird code in 'sk_new()').
4232 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
4234 *) Change the key loading routines for ENGINEs to use the same kind
4235 callback (pem_password_cb) as all other routines that need this
4239 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
4240 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
4241 than this minimum value is recommended.
4244 *) New random seeder for OpenVMS, using the system process statistics
4245 that are easily reachable.
4248 *) Windows apparently can't transparently handle global
4249 variables defined in DLLs. Initialisations such as:
4251 const ASN1_ITEM *it = &ASN1_INTEGER_it;
4253 wont compile. This is used by the any applications that need to
4254 declare their own ASN1 modules. This was fixed by adding the option
4255 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
4256 needed for static libraries under Win32.
4259 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
4260 setting of purpose and trust fields. New X509_STORE trust and
4261 purpose functions and tidy up setting in other SSL functions.
4264 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
4265 structure. These are inherited by X509_STORE_CTX when it is
4266 initialised. This allows various defaults to be set in the
4267 X509_STORE structure (such as flags for CRL checking and custom
4268 purpose or trust settings) for functions which only use X509_STORE_CTX
4269 internally such as S/MIME.
4271 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
4272 trust settings if they are not set in X509_STORE. This allows X509_STORE
4273 purposes and trust (in S/MIME for example) to override any set by default.
4275 Add command line options for CRL checking to smime, s_client and s_server
4279 *) Initial CRL based revocation checking. If the CRL checking flag(s)
4280 are set then the CRL is looked up in the X509_STORE structure and
4281 its validity and signature checked, then if the certificate is found
4282 in the CRL the verify fails with a revoked error.
4284 Various new CRL related callbacks added to X509_STORE_CTX structure.
4286 Command line options added to 'verify' application to support this.
4288 This needs some additional work, such as being able to handle multiple
4289 CRLs with different times, extension based lookup (rather than just
4290 by subject name) and ultimately more complete V2 CRL extension
4294 *) Add a general user interface API (crypto/ui/). This is designed
4295 to replace things like des_read_password and friends (backward
4296 compatibility functions using this new API are provided).
4297 The purpose is to remove prompting functions from the DES code
4298 section as well as provide for prompting through dialog boxes in
4299 a window system and the like.
4302 *) Add "ex_data" support to ENGINE so implementations can add state at a
4303 per-structure level rather than having to store it globally.
4306 *) Make it possible for ENGINE structures to be copied when retrieved by
4307 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
4308 This causes the "original" ENGINE structure to act like a template,
4309 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
4310 operational state can be localised to each ENGINE structure, despite the
4311 fact they all share the same "methods". New ENGINE structures returned in
4312 this case have no functional references and the return value is the single
4313 structural reference. This matches the single structural reference returned
4314 by ENGINE_by_id() normally, when it is incremented on the pre-existing
4318 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
4319 needs to match any other type at all we need to manually clear the
4323 *) Changes to the "openssl engine" utility to include;
4324 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
4325 about an ENGINE's available control commands.
4326 - executing control commands from command line arguments using the
4327 '-pre' and '-post' switches. '-post' is only used if '-t' is
4328 specified and the ENGINE is successfully initialised. The syntax for
4329 the individual commands are colon-separated, for example;
4330 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
4333 *) New dynamic control command support for ENGINEs. ENGINEs can now
4334 declare their own commands (numbers), names (strings), descriptions,
4335 and input types for run-time discovery by calling applications. A
4336 subset of these commands are implicitly classed as "executable"
4337 depending on their input type, and only these can be invoked through
4338 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
4339 can be based on user input, config files, etc). The distinction is
4340 that "executable" commands cannot return anything other than a boolean
4341 result and can only support numeric or string input, whereas some
4342 discoverable commands may only be for direct use through
4343 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
4344 pointers, or other custom uses. The "executable" commands are to
4345 support parameterisations of ENGINE behaviour that can be
4346 unambiguously defined by ENGINEs and used consistently across any
4347 OpenSSL-based application. Commands have been added to all the
4348 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
4349 control over shared-library paths without source code alterations.
4352 *) Changed all ENGINE implementations to dynamically allocate their
4353 ENGINEs rather than declaring them statically. Apart from this being
4354 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
4355 this also allows the implementations to compile without using the
4356 internal engine_int.h header.
4359 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
4360 'const' value. Any code that should be able to modify a RAND_METHOD
4361 should already have non-const pointers to it (ie. they should only
4362 modify their own ones).
4365 *) Made a variety of little tweaks to the ENGINE code.
4366 - "atalla" and "ubsec" string definitions were moved from header files
4367 to C code. "nuron" string definitions were placed in variables
4368 rather than hard-coded - allowing parameterisation of these values
4369 later on via ctrl() commands.
4370 - Removed unused "#if 0"'d code.
4371 - Fixed engine list iteration code so it uses ENGINE_free() to release
4372 structural references.
4373 - Constified the RAND_METHOD element of ENGINE structures.
4374 - Constified various get/set functions as appropriate and added
4375 missing functions (including a catch-all ENGINE_cpy that duplicates
4376 all ENGINE values onto a new ENGINE except reference counts/state).
4377 - Removed NULL parameter checks in get/set functions. Setting a method
4378 or function to NULL is a way of cancelling out a previously set
4379 value. Passing a NULL ENGINE parameter is just plain stupid anyway
4380 and doesn't justify the extra error symbols and code.
4381 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
4382 flags from engine_int.h to engine.h.
4383 - Changed prototypes for ENGINE handler functions (init(), finish(),
4384 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
4387 *) Implement binary inversion algorithm for BN_mod_inverse in addition
4388 to the algorithm using long division. The binary algorithm can be
4389 used only if the modulus is odd. On 32-bit systems, it is faster
4390 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
4391 roughly 5-15% for 256-bit moduli), so we use it only for moduli
4392 up to 450 bits. In 64-bit environments, the binary algorithm
4393 appears to be advantageous for much longer moduli; here we use it
4394 for moduli up to 2048 bits.
4397 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
4398 could not support the combine flag in choice fields.
4401 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
4402 extensions from a certificate request to the certificate.
4405 *) Allow multiple 'certopt' and 'nameopt' options to be separated
4406 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
4407 file: this allows the display of the certificate about to be
4408 signed to be customised, to allow certain fields to be included
4409 or excluded and extension details. The old system didn't display
4410 multicharacter strings properly, omitted fields not in the policy
4411 and couldn't display additional details such as extensions.
4414 *) Function EC_POINTs_mul for multiple scalar multiplication
4415 of an arbitrary number of elliptic curve points
4416 \sum scalars[i]*points[i],
4417 optionally including the generator defined for the EC_GROUP:
4418 scalar*generator + \sum scalars[i]*points[i].
4420 EC_POINT_mul is a simple wrapper function for the typical case
4421 that the point list has just one item (besides the optional
4425 *) First EC_METHODs for curves over GF(p):
4427 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
4428 operations and provides various method functions that can also
4429 operate with faster implementations of modular arithmetic.
4431 EC_GFp_mont_method() reuses most functions that are part of
4432 EC_GFp_simple_method, but uses Montgomery arithmetic.
4434 [Bodo Moeller; point addition and point doubling
4435 implementation directly derived from source code provided by
4436 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
4438 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
4439 crypto/ec/ec_lib.c):
4441 Curves are EC_GROUP objects (with an optional group generator)
4442 based on EC_METHODs that are built into the library.
4444 Points are EC_POINT objects based on EC_GROUP objects.
4446 Most of the framework would be able to handle curves over arbitrary
4447 finite fields, but as there are no obvious types for fields other
4448 than GF(p), some functions are limited to that for now.
4451 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
4452 that the file contains a complete HTTP response.
4455 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
4456 change the def and num file printf format specifier from "%-40sXXX"
4457 to "%-39s XXX". The latter will always guarantee a space after the
4458 field while the former will cause them to run together if the field
4459 is 40 of more characters long.
4462 *) Constify the cipher and digest 'method' functions and structures
4463 and modify related functions to take constant EVP_MD and EVP_CIPHER
4467 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
4468 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
4471 *) Modify EVP_Digest*() routines so they now return values. Although the
4472 internal software routines can never fail additional hardware versions
4476 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
4478 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
4479 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
4482 ERR_R_NESTED_ASN1_ERROR
4484 ERR_R_MISSING_ASN1_EOS
4485 were 4 .. 9, conflicting with
4486 ERR_LIB_RSA (= ERR_R_RSA_LIB)
4488 ERR_LIB_PEM (= ERR_R_PEM_LIB).
4489 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
4491 Add new error code 'ERR_R_INTERNAL_ERROR'.
4494 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
4498 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
4499 sets the subject name for a new request or supersedes the
4500 subject name in a given request. Formats that can be parsed are
4501 'CN=Some Name, OU=myOU, C=IT'
4503 'CN=Some Name/OU=myOU/C=IT'.
4505 Add options '-batch' and '-verbose' to 'openssl req'.
4506 [Massimiliano Pala <madwolf@hackmasters.net>]
4508 *) Introduce the possibility to access global variables through
4509 functions on platform were that's the best way to handle exporting
4510 global variables in shared libraries. To enable this functionality,
4511 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
4512 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
4513 is normally done by Configure or something similar).
4515 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
4516 in the source file (foo.c) like this:
4518 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
4519 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
4521 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
4522 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
4524 OPENSSL_DECLARE_GLOBAL(int,foo);
4525 #define foo OPENSSL_GLOBAL_REF(foo)
4526 OPENSSL_DECLARE_GLOBAL(double,bar);
4527 #define bar OPENSSL_GLOBAL_REF(bar)
4529 The #defines are very important, and therefore so is including the
4530 header file everywhere where the defined globals are used.
4532 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
4533 of ASN.1 items, but that structure is a bit different.
4535 The largest change is in util/mkdef.pl which has been enhanced with
4536 better and easier to understand logic to choose which symbols should
4537 go into the Windows .def files as well as a number of fixes and code
4538 cleanup (among others, algorithm keywords are now sorted
4539 lexicographically to avoid constant rewrites).
4542 *) In BN_div() keep a copy of the sign of 'num' before writing the
4543 result to 'rm' because if rm==num the value will be overwritten
4544 and produce the wrong result if 'num' is negative: this caused
4545 problems with BN_mod() and BN_nnmod().
4548 *) Function OCSP_request_verify(). This checks the signature on an
4549 OCSP request and verifies the signer certificate. The signer
4550 certificate is just checked for a generic purpose and OCSP request
4554 *) Add OCSP_check_validity() function to check the validity of OCSP
4555 responses. OCSP responses are prepared in real time and may only
4556 be a few seconds old. Simply checking that the current time lies
4557 between thisUpdate and nextUpdate max reject otherwise valid responses
4558 caused by either OCSP responder or client clock inaccuracy. Instead
4559 we allow thisUpdate and nextUpdate to fall within a certain period of
4560 the current time. The age of the response can also optionally be
4561 checked. Two new options -validity_period and -status_age added to
4565 *) If signature or public key algorithm is unrecognized print out its
4566 OID rather that just UNKNOWN.
4569 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
4570 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
4571 ID to be generated from the issuer certificate alone which can then be
4572 passed to OCSP_id_issuer_cmp().
4575 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
4576 ASN1 modules to export functions returning ASN1_ITEM pointers
4577 instead of the ASN1_ITEM structures themselves. This adds several
4578 new macros which allow the underlying ASN1 function/structure to
4579 be accessed transparently. As a result code should not use ASN1_ITEM
4580 references directly (such as &X509_it) but instead use the relevant
4581 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
4582 use of the new ASN1 code on platforms where exporting structures
4583 is problematical (for example in shared libraries) but exporting
4584 functions returning pointers to structures is not.
4587 *) Add support for overriding the generation of SSL/TLS session IDs.
4588 These callbacks can be registered either in an SSL_CTX or per SSL.
4589 The purpose of this is to allow applications to control, if they wish,
4590 the arbitrary values chosen for use as session IDs, particularly as it
4591 can be useful for session caching in multiple-server environments. A
4592 command-line switch for testing this (and any client code that wishes
4593 to use such a feature) has been added to "s_server".
4594 [Geoff Thorpe, Lutz Jaenicke]
4596 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
4597 of the form '#if defined(...) || defined(...) || ...' and
4598 '#if !defined(...) && !defined(...) && ...'. This also avoids
4599 the growing number of special cases it was previously handling.
4602 *) Make all configuration macros available for application by making
4603 sure they are available in opensslconf.h, by giving them names starting
4604 with "OPENSSL_" to avoid conflicts with other packages and by making
4605 sure e_os2.h will cover all platform-specific cases together with
4607 Additionally, it is now possible to define configuration/platform-
4608 specific names (called "system identities"). In the C code, these
4609 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
4610 macro with the name beginning with "OPENSSL_SYS_", which is determined
4611 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
4615 *) New option -set_serial to 'req' and 'x509' this allows the serial
4616 number to use to be specified on the command line. Previously self
4617 signed certificates were hard coded with serial number 0 and the
4618 CA options of 'x509' had to use a serial number in a file which was
4622 *) New options to 'ca' utility to support V2 CRL entry extensions.
4623 Currently CRL reason, invalidity date and hold instruction are
4624 supported. Add new CRL extensions to V3 code and some new objects.
4627 *) New function EVP_CIPHER_CTX_set_padding() this is used to
4628 disable standard block padding (aka PKCS#5 padding) in the EVP
4629 API, which was previously mandatory. This means that the data is
4630 not padded in any way and so the total length much be a multiple
4631 of the block size, otherwise an error occurs.
4634 *) Initial (incomplete) OCSP SSL support.
4637 *) New function OCSP_parse_url(). This splits up a URL into its host,
4638 port and path components: primarily to parse OCSP URLs. New -url
4639 option to ocsp utility.
4642 *) New nonce behavior. The return value of OCSP_check_nonce() now
4643 reflects the various checks performed. Applications can decide
4644 whether to tolerate certain situations such as an absent nonce
4645 in a response when one was present in a request: the ocsp application
4646 just prints out a warning. New function OCSP_add1_basic_nonce()
4647 this is to allow responders to include a nonce in a response even if
4648 the request is nonce-less.
4651 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
4652 skipped when using openssl x509 multiple times on a single input file,
4653 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
4656 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
4657 set string type: to handle setting ASN1_TIME structures. Fix ca
4658 utility to correctly initialize revocation date of CRLs.
4661 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
4662 the clients preferred ciphersuites and rather use its own preferences.
4663 Should help to work around M$ SGC (Server Gated Cryptography) bug in
4664 Internet Explorer by ensuring unchanged hash method during stepup.
4665 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
4668 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
4669 to aes and add a new 'exist' option to print out symbols that don't
4673 *) Additional options to ocsp utility to allow flags to be set and
4674 additional certificates supplied.
4677 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
4678 OCSP client a number of certificate to only verify the response
4682 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
4683 handle the new API. Currently only ECB, CBC modes supported. Add new
4686 Add TLS AES ciphersuites as described in RFC3268, "Advanced
4687 Encryption Standard (AES) Ciphersuites for Transport Layer
4688 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
4689 not enabled by default and were not part of the "ALL" ciphersuite
4690 alias because they were not yet official; they could be
4691 explicitly requested by specifying the "AESdraft" ciphersuite
4692 group alias. In the final release of OpenSSL 0.9.7, the group
4693 alias is called "AES" and is part of "ALL".)
4694 [Ben Laurie, Steve Henson, Bodo Moeller]
4696 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
4697 request to response.
4700 *) Functions for OCSP responders. OCSP_request_onereq_count(),
4701 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
4702 extract information from a certificate request. OCSP_response_create()
4703 creates a response and optionally adds a basic response structure.
4704 OCSP_basic_add1_status() adds a complete single response to a basic
4705 response and returns the OCSP_SINGLERESP structure just added (to allow
4706 extensions to be included for example). OCSP_basic_add1_cert() adds a
4707 certificate to a basic response and OCSP_basic_sign() signs a basic
4708 response with various flags. New helper functions ASN1_TIME_check()
4709 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
4710 (converts ASN1_TIME to GeneralizedTime).
4713 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
4714 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
4715 structure from a certificate. X509_pubkey_digest() digests the public_key
4716 contents: this is used in various key identifiers.
4719 *) Make sk_sort() tolerate a NULL argument.
4720 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
4722 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
4723 passed by the function are trusted implicitly. If any of them signed the
4724 response then it is assumed to be valid and is not verified.
4727 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
4728 to data. This was previously part of the PKCS7 ASN1 code. This
4729 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
4730 [Steve Henson, reported by Kenneth R. Robinette
4731 <support@securenetterm.com>]
4733 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
4734 routines: without these tracing memory leaks is very painful.
4735 Fix leaks in PKCS12 and PKCS7 routines.
4738 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
4739 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
4740 effectively meant GeneralizedTime would never be used. Now it
4741 is initialised to -1 but X509_time_adj() now has to check the value
4742 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
4743 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
4744 [Steve Henson, reported by Kenneth R. Robinette
4745 <support@securenetterm.com>]
4747 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
4748 result in a zero length in the ASN1_INTEGER structure which was
4749 not consistent with the structure when d2i_ASN1_INTEGER() was used
4750 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
4751 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
4752 where it did not print out a minus for negative ASN1_INTEGER.
4755 *) Add summary printout to ocsp utility. The various functions which
4756 convert status values to strings have been renamed to:
4757 OCSP_response_status_str(), OCSP_cert_status_str() and
4758 OCSP_crl_reason_str() and are no longer static. New options
4759 to verify nonce values and to disable verification. OCSP response
4760 printout format cleaned up.
4763 *) Add additional OCSP certificate checks. These are those specified
4764 in RFC2560. This consists of two separate checks: the CA of the
4765 certificate being checked must either be the OCSP signer certificate
4766 or the issuer of the OCSP signer certificate. In the latter case the
4767 OCSP signer certificate must contain the OCSP signing extended key
4768 usage. This check is performed by attempting to match the OCSP
4769 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
4770 in the OCSP_CERTID structures of the response.
4773 *) Initial OCSP certificate verification added to OCSP_basic_verify()
4774 and related routines. This uses the standard OpenSSL certificate
4775 verify routines to perform initial checks (just CA validity) and
4776 to obtain the certificate chain. Then additional checks will be
4777 performed on the chain. Currently the root CA is checked to see
4778 if it is explicitly trusted for OCSP signing. This is used to set
4779 a root CA as a global signing root: that is any certificate that
4780 chains to that CA is an acceptable OCSP signing certificate.
4783 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
4784 extensions from a separate configuration file.
4785 As when reading extensions from the main configuration file,
4786 the '-extensions ...' option may be used for specifying the
4788 [Massimiliano Pala <madwolf@comune.modena.it>]
4790 *) New OCSP utility. Allows OCSP requests to be generated or
4791 read. The request can be sent to a responder and the output
4792 parsed, outputed or printed in text form. Not complete yet:
4793 still needs to check the OCSP response validity.
4796 *) New subcommands for 'openssl ca':
4797 'openssl ca -status <serial>' prints the status of the cert with
4798 the given serial number (according to the index file).
4799 'openssl ca -updatedb' updates the expiry status of certificates
4801 [Massimiliano Pala <madwolf@comune.modena.it>]
4803 *) New '-newreq-nodes' command option to CA.pl. This is like
4804 '-newreq', but calls 'openssl req' with the '-nodes' option
4805 so that the resulting key is not encrypted.
4806 [Damien Miller <djm@mindrot.org>]
4808 *) New configuration for the GNU Hurd.
4809 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
4811 *) Initial code to implement OCSP basic response verify. This
4812 is currently incomplete. Currently just finds the signer's
4813 certificate and verifies the signature on the response.
4816 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
4817 value of OPENSSLDIR. This is available via the new '-d' option
4818 to 'openssl version', and is also included in 'openssl version -a'.
4821 *) Allowing defining memory allocation callbacks that will be given
4822 file name and line number information in additional arguments
4823 (a const char* and an int). The basic functionality remains, as
4824 well as the original possibility to just replace malloc(),
4825 realloc() and free() by functions that do not know about these
4826 additional arguments. To register and find out the current
4827 settings for extended allocation functions, the following
4828 functions are provided:
4830 CRYPTO_set_mem_ex_functions
4831 CRYPTO_set_locked_mem_ex_functions
4832 CRYPTO_get_mem_ex_functions
4833 CRYPTO_get_locked_mem_ex_functions
4835 These work the same way as CRYPTO_set_mem_functions and friends.
4836 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
4837 extended allocation function is enabled.
4838 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
4839 a conventional allocation function is enabled.
4840 [Richard Levitte, Bodo Moeller]
4842 *) Finish off removing the remaining LHASH function pointer casts.
4843 There should no longer be any prototype-casting required when using
4844 the LHASH abstraction, and any casts that remain are "bugs". See
4845 the callback types and macros at the head of lhash.h for details
4846 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
4849 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
4850 If /dev/[u]random devices are not available or do not return enough
4851 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
4853 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
4854 /etc/entropy will be queried once each in this sequence, quering stops
4855 when enough entropy was collected without querying more sockets.
4858 *) Change the Unix RAND_poll() variant to be able to poll several
4859 random devices, as specified by DEVRANDOM, until a sufficient amount
4860 of data has been collected. We spend at most 10 ms on each file
4861 (select timeout) and read in non-blocking mode. DEVRANDOM now
4862 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
4863 (previously it was just the string "/dev/urandom"), so on typical
4864 platforms the 10 ms delay will never occur.
4865 Also separate out the Unix variant to its own file, rand_unix.c.
4866 For VMS, there's a currently-empty rand_vms.c.
4869 *) Move OCSP client related routines to ocsp_cl.c. These
4870 provide utility functions which an application needing
4871 to issue a request to an OCSP responder and analyse the
4872 response will typically need: as opposed to those which an
4873 OCSP responder itself would need which will be added later.
4875 OCSP_request_sign() signs an OCSP request with an API similar
4876 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
4877 response. OCSP_response_get1_basic() extracts basic response
4878 from response. OCSP_resp_find_status(): finds and extracts status
4879 information from an OCSP_CERTID structure (which will be created
4880 when the request structure is built). These are built from lower
4881 level functions which work on OCSP_SINGLERESP structures but
4882 wont normally be used unless the application wishes to examine
4883 extensions in the OCSP response for example.
4885 Replace nonce routines with a pair of functions.
4886 OCSP_request_add1_nonce() adds a nonce value and optionally
4887 generates a random value. OCSP_check_nonce() checks the
4888 validity of the nonce in an OCSP response.
4891 *) Change function OCSP_request_add() to OCSP_request_add0_id().
4892 This doesn't copy the supplied OCSP_CERTID and avoids the
4893 need to free up the newly created id. Change return type
4894 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
4895 This can then be used to add extensions to the request.
4896 Deleted OCSP_request_new(), since most of its functionality
4897 is now in OCSP_REQUEST_new() (and the case insensitive name
4898 clash) apart from the ability to set the request name which
4899 will be added elsewhere.
4902 *) Update OCSP API. Remove obsolete extensions argument from
4903 various functions. Extensions are now handled using the new
4904 OCSP extension code. New simple OCSP HTTP function which
4905 can be used to send requests and parse the response.
4908 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
4909 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
4910 uses the special reorder version of SET OF to sort the attributes
4911 and reorder them to match the encoded order. This resolves a long
4912 standing problem: a verify on a PKCS7 structure just after signing
4913 it used to fail because the attribute order did not match the
4914 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
4915 it uses the received order. This is necessary to tolerate some broken
4916 software that does not order SET OF. This is handled by encoding
4917 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
4918 to produce the required SET OF.
4921 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
4922 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
4923 files to get correct declarations of the ASN.1 item variables.
4926 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
4927 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
4928 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
4929 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
4930 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
4931 ASN1_ITEM and no wrapper functions.
4934 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
4935 replace the old function pointer based I/O routines. Change most of
4936 the *_d2i_bio() and *_d2i_fp() functions to use these.
4939 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
4940 lines, recognice more "algorithms" that can be deselected, and make
4941 it complain about algorithm deselection that isn't recognised.
4944 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
4945 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
4946 to use new functions. Add NO_ASN1_OLD which can be set to remove
4947 some old style ASN1 functions: this can be used to determine if old
4948 code will still work when these eventually go away.
4951 *) New extension functions for OCSP structures, these follow the
4952 same conventions as certificates and CRLs.
4955 *) New function X509V3_add1_i2d(). This automatically encodes and
4956 adds an extension. Its behaviour can be customised with various
4957 flags to append, replace or delete. Various wrappers added for
4958 certifcates and CRLs.
4961 *) Fix to avoid calling the underlying ASN1 print routine when
4962 an extension cannot be parsed. Correct a typo in the
4963 OCSP_SERVICELOC extension. Tidy up print OCSP format.
4966 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
4967 entries for variables.
4970 *) Add functionality to apps/openssl.c for detecting locking
4971 problems: As the program is single-threaded, all we have
4972 to do is register a locking callback using an array for
4973 storing which locks are currently held by the program.
4976 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
4977 SSL_get_ex_data_X509_STORE_idx(), which is used in
4978 ssl_verify_cert_chain() and thus can be called at any time
4979 during TLS/SSL handshakes so that thread-safety is essential.
4980 Unfortunately, the ex_data design is not at all suited
4981 for multi-threaded use, so it probably should be abolished.
4984 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
4985 [Broadcom, tweaked and integrated by Geoff Thorpe]
4987 *) Move common extension printing code to new function
4988 X509V3_print_extensions(). Reorganise OCSP print routines and
4989 implement some needed OCSP ASN1 functions. Add OCSP extensions.
4992 *) New function X509_signature_print() to remove duplication in some
4996 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
4997 set (this was treated exactly the same as SET OF previously). This
4998 is used to reorder the STACK representing the structure to match the
4999 encoding. This will be used to get round a problem where a PKCS7
5000 structure which was signed could not be verified because the STACK
5001 order did not reflect the encoded order.
5004 *) Reimplement the OCSP ASN1 module using the new code.
5007 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
5008 for its ASN1 operations. The old style function pointers still exist
5009 for now but they will eventually go away.
5012 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
5013 completely replaces the old ASN1 functionality with a table driven
5014 encoder and decoder which interprets an ASN1_ITEM structure describing
5015 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
5016 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
5017 has also been converted to the new form.
5020 *) Change BN_mod_exp_recp so that negative moduli are tolerated
5021 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
5022 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
5023 for negative moduli.
5026 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
5027 of not touching the result's sign bit.
5030 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
5034 *) Changed the LHASH code to use prototypes for callbacks, and created
5035 macros to declare and implement thin (optionally static) functions
5036 that provide type-safety and avoid function pointer casting for the
5037 type-specific callbacks.
5040 *) Added Kerberos Cipher Suites to be used with TLS, as written in
5042 [Veers Staats <staatsvr@asc.hpc.mil>,
5043 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
5045 *) Reformat the FAQ so the different questions and answers can be divided
5046 in sections depending on the subject.
5049 *) Have the zlib compression code load ZLIB.DLL dynamically under
5053 *) New function BN_mod_sqrt for computing square roots modulo a prime
5054 (using the probabilistic Tonelli-Shanks algorithm unless
5055 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
5056 be handled deterministically).
5057 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5059 *) Make BN_mod_inverse faster by explicitly handling small quotients
5060 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
5061 512 bits], about 30% for larger ones [1024 or 2048 bits].)
5064 *) New function BN_kronecker.
5067 *) Fix BN_gcd so that it works on negative inputs; the result is
5068 positive unless both parameters are zero.
5069 Previously something reasonably close to an infinite loop was
5070 possible because numbers could be growing instead of shrinking
5071 in the implementation of Euclid's algorithm.
5074 *) Fix BN_is_word() and BN_is_one() macros to take into account the
5075 sign of the number in question.
5077 Fix BN_is_word(a,w) to work correctly for w == 0.
5079 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
5080 because its test if the absolute value of 'a' equals 'w'.
5081 Note that BN_abs_is_word does *not* handle w == 0 reliably;
5082 it exists mostly for use in the implementations of BN_is_zero(),
5083 BN_is_one(), and BN_is_word().
5086 *) New function BN_swap.
5089 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
5090 the exponentiation functions are more likely to produce reasonable
5091 results on negative inputs.
5094 *) Change BN_mod_mul so that the result is always non-negative.
5095 Previously, it could be negative if one of the factors was negative;
5096 I don't think anyone really wanted that behaviour.
5099 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
5100 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
5101 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
5102 and add new functions:
5111 BN_mod_lshift1_quick
5115 These functions always generate non-negative results.
5117 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
5118 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
5120 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
5121 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
5122 be reduced modulo m.
5123 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
5126 The following entry accidentily appeared in the CHANGES file
5127 distributed with OpenSSL 0.9.7. The modifications described in
5128 it do *not* apply to OpenSSL 0.9.7.
5130 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
5131 was actually never needed) and in BN_mul(). The removal in BN_mul()
5132 required a small change in bn_mul_part_recursive() and the addition
5133 of the functions bn_cmp_part_words(), bn_sub_part_words() and
5134 bn_add_part_words(), which do the same thing as bn_cmp_words(),
5135 bn_sub_words() and bn_add_words() except they take arrays with
5140 *) In 'openssl passwd', verify passwords read from the terminal
5141 unless the '-salt' option is used (which usually means that
5142 verification would just waste user's time since the resulting
5143 hash is going to be compared with some given password hash)
5144 or the new '-noverify' option is used.
5146 This is an incompatible change, but it does not affect
5147 non-interactive use of 'openssl passwd' (passwords on the command
5148 line, '-stdin' option, '-in ...' option) and thus should not
5152 *) Remove all references to RSAref, since there's no more need for it.
5155 *) Make DSO load along a path given through an environment variable
5156 (SHLIB_PATH) with shl_load().
5159 *) Constify the ENGINE code as a result of BIGNUM constification.
5160 Also constify the RSA code and most things related to it. In a
5161 few places, most notable in the depth of the ASN.1 code, ugly
5162 casts back to non-const were required (to be solved at a later
5166 *) Make it so the openssl application has all engines loaded by default.
5169 *) Constify the BIGNUM routines a little more.
5172 *) Add the following functions:
5174 ENGINE_load_cswift()
5176 ENGINE_load_atalla()
5178 ENGINE_load_builtin_engines()
5180 That way, an application can itself choose if external engines that
5181 are built-in in OpenSSL shall ever be used or not. The benefit is
5182 that applications won't have to be linked with libdl or other dso
5183 libraries unless it's really needed.
5185 Changed 'openssl engine' to load all engines on demand.
5186 Changed the engine header files to avoid the duplication of some
5187 declarations (they differed!).
5190 *) 'openssl engine' can now list capabilities.
5193 *) Better error reporting in 'openssl engine'.
5196 *) Never call load_dh_param(NULL) in s_server.
5199 *) Add engine application. It can currently list engines by name and
5200 identity, and test if they are actually available.
5203 *) Improve RPM specification file by forcing symbolic linking and making
5204 sure the installed documentation is also owned by root.root.
5205 [Damien Miller <djm@mindrot.org>]
5207 *) Give the OpenSSL applications more possibilities to make use of
5208 keys (public as well as private) handled by engines.
5211 *) Add OCSP code that comes from CertCo.
5214 *) Add VMS support for the Rijndael code.
5217 *) Added untested support for Nuron crypto accelerator.
5220 *) Add support for external cryptographic devices. This code was
5221 previously distributed separately as the "engine" branch.
5222 [Geoff Thorpe, Richard Levitte]
5224 *) Rework the filename-translation in the DSO code. It is now possible to
5225 have far greater control over how a "name" is turned into a filename
5226 depending on the operating environment and any oddities about the
5227 different shared library filenames on each system.
5230 *) Support threads on FreeBSD-elf in Configure.
5233 *) Fix for SHA1 assembly problem with MASM: it produces
5234 warnings about corrupt line number information when assembling
5235 with debugging information. This is caused by the overlapping
5237 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
5240 NCONF_get_number() has no error checking at all. As a replacement,
5241 NCONF_get_number_e() is defined (_e for "error checking") and is
5242 promoted strongly. The old NCONF_get_number is kept around for
5243 binary backward compatibility.
5244 Make it possible for methods to load from something other than a BIO,
5245 by providing a function pointer that is given a name instead of a BIO.
5246 For example, this could be used to load configuration data from an
5250 *) Fix for non blocking accept BIOs. Added new I/O special reason
5251 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
5252 with non blocking I/O was not possible because no retry code was
5253 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
5257 *) Added the beginnings of Rijndael support.
5260 *) Fix for bug in DirectoryString mask setting. Add support for
5261 X509_NAME_print_ex() in 'req' and X509_print_ex() function
5262 to allow certificate printing to more controllable, additional
5263 'certopt' option to 'x509' to allow new printing options to be
5267 *) Clean old EAY MD5 hack from e_os.h.
5270 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
5272 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
5273 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
5274 [Joe Orton, Steve Henson]
5276 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
5278 *) Fix additional bug revealed by the NISCC test suite:
5280 Stop bug triggering large recursion when presented with
5281 certain ASN.1 tags (CVE-2003-0851)
5284 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
5286 *) Fix various bugs revealed by running the NISCC test suite:
5288 Stop out of bounds reads in the ASN1 code when presented with
5289 invalid tags (CVE-2003-0543 and CVE-2003-0544).
5291 If verify callback ignores invalid public key errors don't try to check
5292 certificate signature with the NULL public key.
5296 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
5297 if the server requested one: as stated in TLS 1.0 and SSL 3.0
5301 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
5302 extra data after the compression methods not only for TLS 1.0
5303 but also for SSL 3.0 (as required by the specification).
5304 [Bodo Moeller; problem pointed out by Matthias Loepfe]
5306 *) Change X509_certificate_type() to mark the key as exported/exportable
5307 when it's 512 *bits* long, not 512 bytes.
5310 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
5312 *) Countermeasure against the Klima-Pokorny-Rosa extension of
5313 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
5314 a protocol version number mismatch like a decryption error
5315 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
5318 *) Turn on RSA blinding by default in the default implementation
5319 to avoid a timing attack. Applications that don't want it can call
5320 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
5321 They would be ill-advised to do so in most cases.
5322 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
5324 *) Change RSA blinding code so that it works when the PRNG is not
5325 seeded (in this case, the secret RSA exponent is abused as
5326 an unpredictable seed -- if it is not unpredictable, there
5327 is no point in blinding anyway). Make RSA blinding thread-safe
5328 by remembering the creator's thread ID in rsa->blinding and
5329 having all other threads use local one-time blinding factors
5330 (this requires more computation than sharing rsa->blinding, but
5331 avoids excessive locking; and if an RSA object is not shared
5332 between threads, blinding will still be very fast).
5335 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
5337 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
5338 via timing by performing a MAC computation even if incorrrect
5339 block cipher padding has been found. This is a countermeasure
5340 against active attacks where the attacker has to distinguish
5341 between bad padding and a MAC verification error. (CVE-2003-0078)
5343 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
5344 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
5345 Martin Vuagnoux (EPFL, Ilion)]
5347 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
5349 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
5350 memory from it's contents. This is done with a counter that will
5351 place alternating values in each byte. This can be used to solve
5352 two issues: 1) the removal of calls to memset() by highly optimizing
5353 compilers, and 2) cleansing with other values than 0, since those can
5354 be read through on certain media, for example a swap space on disk.
5357 *) Bugfix: client side session caching did not work with external caching,
5358 because the session->cipher setting was not restored when reloading
5359 from the external cache. This problem was masked, when
5360 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
5361 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
5364 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
5365 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
5366 [Zeev Lieber <zeev-l@yahoo.com>]
5368 *) Undo an undocumented change introduced in 0.9.6e which caused
5369 repeated calls to OpenSSL_add_all_ciphers() and
5370 OpenSSL_add_all_digests() to be ignored, even after calling
5374 *) Change the default configuration reader to deal with last line not
5375 being properly terminated.
5378 *) Change X509_NAME_cmp() so it applies the special rules on handling
5379 DN values that are of type PrintableString, as well as RDNs of type
5380 emailAddress where the value has the type ia5String.
5381 [stefank@valicert.com via Richard Levitte]
5383 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
5384 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
5385 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
5386 the bitwise-OR of the two for use by the majority of applications
5387 wanting this behaviour, and update the docs. The documented
5388 behaviour and actual behaviour were inconsistent and had been
5389 changing anyway, so this is more a bug-fix than a behavioural
5391 [Geoff Thorpe, diagnosed by Nadav Har'El]
5393 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
5394 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
5397 *) Fix initialization code race conditions in
5398 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
5399 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
5400 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
5401 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
5402 ssl2_get_cipher_by_char(),
5403 ssl3_get_cipher_by_char().
5404 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
5406 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
5407 the cached sessions are flushed, as the remove_cb() might use ex_data
5408 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
5409 (see [openssl.org #212]).
5410 [Geoff Thorpe, Lutz Jaenicke]
5412 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
5413 length, instead of the encoding length to d2i_ASN1_OBJECT.
5416 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
5418 *) [In 0.9.6g-engine release:]
5419 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
5420 [Lynn Gazis <lgazis@rainbow.com>]
5422 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
5424 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
5425 and get fix the header length calculation.
5426 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
5427 Alon Kantor <alonk@checkpoint.com> (and others),
5430 *) Use proper error handling instead of 'assertions' in buffer
5431 overflow checks added in 0.9.6e. This prevents DoS (the
5432 assertions could call abort()).
5433 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
5435 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
5437 *) Add various sanity checks to asn1_get_length() to reject
5438 the ASN1 length bytes if they exceed sizeof(long), will appear
5439 negative or the content length exceeds the length of the
5441 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5443 *) Fix cipher selection routines: ciphers without encryption had no flags
5444 for the cipher strength set and where therefore not handled correctly
5445 by the selection routines (PR #130).
5448 *) Fix EVP_dsa_sha macro.
5452 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
5453 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
5454 that was added in OpenSSL 0.9.6d.
5456 As the countermeasure turned out to be incompatible with some
5457 broken SSL implementations, the new option is part of SSL_OP_ALL.
5458 SSL_OP_ALL is usually employed when compatibility with weird SSL
5459 implementations is desired (e.g. '-bugs' option to 's_client' and
5460 's_server'), so the new option is automatically set in many
5464 *) Changes in security patch:
5466 Changes marked "(CHATS)" were sponsored by the Defense Advanced
5467 Research Projects Agency (DARPA) and Air Force Research Laboratory,
5468 Air Force Materiel Command, USAF, under agreement number
5471 *) Add various sanity checks to asn1_get_length() to reject
5472 the ASN1 length bytes if they exceed sizeof(long), will appear
5473 negative or the content length exceeds the length of the
5474 supplied buffer. (CVE-2002-0659)
5475 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
5477 *) Assertions for various potential buffer overflows, not known to
5479 [Ben Laurie (CHATS)]
5481 *) Various temporary buffers to hold ASCII versions of integers were
5482 too small for 64 bit platforms. (CVE-2002-0655)
5483 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
5485 *) Remote buffer overflow in SSL3 protocol - an attacker could
5486 supply an oversized session ID to a client. (CVE-2002-0656)
5487 [Ben Laurie (CHATS)]
5489 *) Remote buffer overflow in SSL2 protocol - an attacker could
5490 supply an oversized client master key. (CVE-2002-0656)
5491 [Ben Laurie (CHATS)]
5493 Changes between 0.9.6c and 0.9.6d [9 May 2002]
5495 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
5496 encoded as NULL) with id-dsa-with-sha1.
5497 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
5499 *) Check various X509_...() return values in apps/req.c.
5500 [Nils Larsch <nla@trustcenter.de>]
5502 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
5503 an end-of-file condition would erronously be flagged, when the CRLF
5504 was just at the end of a processed block. The bug was discovered when
5505 processing data through a buffering memory BIO handing the data to a
5506 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
5507 <ptsekov@syntrex.com> and Nedelcho Stanev.
5510 *) Implement a countermeasure against a vulnerability recently found
5511 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
5512 before application data chunks to avoid the use of known IVs
5513 with data potentially chosen by the attacker.
5516 *) Fix length checks in ssl3_get_client_hello().
5519 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
5520 to prevent ssl3_read_internal() from incorrectly assuming that
5521 ssl3_read_bytes() found application data while handshake
5522 processing was enabled when in fact s->s3->in_read_app_data was
5523 merely automatically cleared during the initial handshake.
5524 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
5526 *) Fix object definitions for Private and Enterprise: they were not
5527 recognized in their shortname (=lowercase) representation. Extend
5528 obj_dat.pl to issue an error when using undefined keywords instead
5529 of silently ignoring the problem (Svenning Sorensen
5530 <sss@sss.dnsalias.net>).
5533 *) Fix DH_generate_parameters() so that it works for 'non-standard'
5534 generators, i.e. generators other than 2 and 5. (Previously, the
5535 code did not properly initialise the 'add' and 'rem' values to
5536 BN_generate_prime().)
5538 In the new general case, we do not insist that 'generator' is
5539 actually a primitive root: This requirement is rather pointless;
5540 a generator of the order-q subgroup is just as good, if not
5544 *) Map new X509 verification errors to alerts. Discovered and submitted by
5545 Tom Wu <tom@arcot.com>.
5548 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
5549 returning non-zero before the data has been completely received
5550 when using non-blocking I/O.
5551 [Bodo Moeller; problem pointed out by John Hughes]
5553 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
5554 [Ben Laurie, Lutz Jaenicke]
5556 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
5557 Yoram Zahavi <YoramZ@gilian.com>).
5560 *) Add information about CygWin 1.3 and on, and preserve proper
5561 configuration for the versions before that.
5562 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
5564 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
5565 check whether we deal with a copy of a session and do not delete from
5566 the cache in this case. Problem reported by "Izhar Shoshani Levi"
5567 <izhar@checkpoint.com>.
5570 *) Do not store session data into the internal session cache, if it
5571 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
5572 flag is set). Proposed by Aslam <aslam@funk.com>.
5575 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
5579 *) [In 0.9.6d-engine release:]
5580 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
5581 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
5583 *) Add the configuration target linux-s390x.
5584 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
5586 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
5587 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
5588 variable as an indication that a ClientHello message has been
5589 received. As the flag value will be lost between multiple
5590 invocations of ssl3_accept when using non-blocking I/O, the
5591 function may not be aware that a handshake has actually taken
5592 place, thus preventing a new session from being added to the
5595 To avoid this problem, we now set s->new_session to 2 instead of
5596 using a local variable.
5597 [Lutz Jaenicke, Bodo Moeller]
5599 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
5600 if the SSL_R_LENGTH_MISMATCH error is detected.
5601 [Geoff Thorpe, Bodo Moeller]
5603 *) New 'shared_ldflag' column in Configure platform table.
5606 *) Fix EVP_CIPHER_mode macro.
5607 ["Dan S. Camper" <dan@bti.net>]
5609 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
5610 type, we must throw them away by setting rr->length to 0.
5611 [D P Chang <dpc@qualys.com>]
5613 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
5615 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
5616 <Dominikus.Scherkl@biodata.com>. (The previous implementation
5617 worked incorrectly for those cases where range = 10..._2 and
5618 3*range is two bits longer than range.)
5621 *) Only add signing time to PKCS7 structures if it is not already
5625 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
5626 OBJ_ld_ce should be OBJ_id_ce.
5627 Also some ip-pda OIDs in crypto/objects/objects.txt were
5628 incorrect (cf. RFC 3039).
5629 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
5631 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
5632 returns early because it has nothing to do.
5633 [Andy Schneider <andy.schneider@bjss.co.uk>]
5635 *) [In 0.9.6c-engine release:]
5636 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
5637 [Andy Schneider <andy.schneider@bjss.co.uk>]
5639 *) [In 0.9.6c-engine release:]
5640 Add support for Cryptographic Appliance's keyserver technology.
5641 (Use engine 'keyclient')
5642 [Cryptographic Appliances and Geoff Thorpe]
5644 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
5645 is called via tools/c89.sh because arguments have to be
5646 rearranged (all '-L' options must appear before the first object
5648 [Richard Shapiro <rshapiro@abinitio.com>]
5650 *) [In 0.9.6c-engine release:]
5651 Add support for Broadcom crypto accelerator cards, backported
5653 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
5655 *) [In 0.9.6c-engine release:]
5656 Add support for SureWare crypto accelerator cards from
5657 Baltimore Technologies. (Use engine 'sureware')
5658 [Baltimore Technologies and Mark Cox]
5660 *) [In 0.9.6c-engine release:]
5661 Add support for crypto accelerator cards from Accelerated
5662 Encryption Processing, www.aep.ie. (Use engine 'aep')
5663 [AEP Inc. and Mark Cox]
5665 *) Add a configuration entry for gcc on UnixWare.
5666 [Gary Benson <gbenson@redhat.com>]
5668 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
5669 messages are stored in a single piece (fixed-length part and
5670 variable-length part combined) and fix various bugs found on the way.
5673 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
5674 instead. BIO_gethostbyname() does not know what timeouts are
5675 appropriate, so entries would stay in cache even when they have
5677 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
5679 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
5680 faced with a pathologically small ClientHello fragment that does
5681 not contain client_version: Instead of aborting with an error,
5682 simply choose the highest available protocol version (i.e.,
5683 TLS 1.0 unless it is disabled). In practice, ClientHello
5684 messages are never sent like this, but this change gives us
5685 strictly correct behaviour at least for TLS.
5688 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
5689 never resets s->method to s->ctx->method when called from within
5690 one of the SSL handshake functions.
5691 [Bodo Moeller; problem pointed out by Niko Baric]
5693 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
5694 (sent using the client's version number) if client_version is
5695 smaller than the protocol version in use. Also change
5696 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
5697 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
5698 the client will at least see that alert.
5701 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
5705 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
5706 client receives HelloRequest while in a handshake.
5707 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
5709 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
5710 should end in 'break', not 'goto end' which circuments various
5711 cleanups done in state SSL_ST_OK. But session related stuff
5712 must be disabled for SSL_ST_OK in the case that we just sent a
5715 Also avoid some overhead by not calling ssl_init_wbio_buffer()
5716 before just sending a HelloRequest.
5717 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
5719 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
5720 reveal whether illegal block cipher padding was found or a MAC
5721 verification error occured. (Neither SSLerr() codes nor alerts
5722 are directly visible to potential attackers, but the information
5723 may leak via logfiles.)
5725 Similar changes are not required for the SSL 2.0 implementation
5726 because the number of padding bytes is sent in clear for SSL 2.0,
5727 and the extra bytes are just ignored. However ssl/s2_pkt.c
5728 failed to verify that the purported number of padding bytes is in
5732 *) Add OpenUNIX-8 support including shared libraries
5733 (Boyd Lynn Gerber <gerberb@zenez.com>).
5736 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
5737 'wristwatch attack' using huge encoding parameters (cf.
5738 James H. Manger's CRYPTO 2001 paper). Note that the
5739 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
5740 encoding parameters and hence was not vulnerable.
5743 *) BN_sqr() bug fix.
5744 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
5746 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
5747 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
5748 followed by modular reduction.
5749 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
5751 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
5752 equivalent based on BN_pseudo_rand() instead of BN_rand().
5755 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
5756 This function was broken, as the check for a new client hello message
5757 to handle SGC did not allow these large messages.
5758 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
5761 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
5764 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
5765 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
5768 *) Rework the configuration and shared library support for Tru64 Unix.
5769 The configuration part makes use of modern compiler features and
5770 still retains old compiler behavior for those that run older versions
5771 of the OS. The shared library support part includes a variant that
5772 uses the RPATH feature, and is available through the special
5773 configuration target "alpha-cc-rpath", which will never be selected
5775 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
5777 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
5778 with the same message size as in ssl3_get_certificate_request().
5779 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
5780 messages might inadvertently be reject as too long.
5781 [Petr Lampa <lampa@fee.vutbr.cz>]
5783 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
5786 *) Modified SSL library such that the verify_callback that has been set
5787 specificly for an SSL object with SSL_set_verify() is actually being
5788 used. Before the change, a verify_callback set with this function was
5789 ignored and the verify_callback() set in the SSL_CTX at the time of
5790 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
5791 to allow the necessary settings.
5794 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
5795 explicitly to NULL, as at least on Solaris 8 this seems not always to be
5796 done automatically (in contradiction to the requirements of the C
5797 standard). This made problems when used from OpenSSH.
5800 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
5801 dh->length and always used
5803 BN_rand_range(priv_key, dh->p).
5805 BN_rand_range() is not necessary for Diffie-Hellman, and this
5806 specific range makes Diffie-Hellman unnecessarily inefficient if
5807 dh->length (recommended exponent length) is much smaller than the
5808 length of dh->p. We could use BN_rand_range() if the order of
5809 the subgroup was stored in the DH structure, but we only have
5814 BN_rand(priv_key, l, ...)
5816 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
5822 RSA_eay_public_encrypt
5823 RSA_eay_private_decrypt
5824 RSA_eay_private_encrypt (signing)
5825 RSA_eay_public_decrypt (signature verification)
5827 (default implementations for RSA_public_encrypt,
5828 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
5829 always reject numbers >= n.
5832 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
5833 to synchronize access to 'locking_thread'. This is necessary on
5834 systems where access to 'locking_thread' (an 'unsigned long'
5835 variable) is not atomic.
5838 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
5839 *before* setting the 'crypto_lock_rand' flag. The previous code had
5840 a race condition if 0 is a valid thread ID.
5841 [Travis Vitek <vitek@roguewave.com>]
5843 *) Add support for shared libraries under Irix.
5844 [Albert Chin-A-Young <china@thewrittenword.com>]
5846 *) Add configuration option to build on Linux on both big-endian and
5848 [Ralf Baechle <ralf@uni-koblenz.de>]
5850 *) Add the possibility to create shared libraries on HP-UX.
5853 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
5855 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
5856 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
5857 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
5858 PRNG state recovery was possible based on the output of
5859 one PRNG request appropriately sized to gain knowledge on
5860 'md' followed by enough consecutive 1-byte PRNG requests
5861 to traverse all of 'state'.
5863 1. When updating 'md_local' (the current thread's copy of 'md')
5864 during PRNG output generation, hash all of the previous
5865 'md_local' value, not just the half used for PRNG output.
5867 2. Make the number of bytes from 'state' included into the hash
5868 independent from the number of PRNG bytes requested.
5870 The first measure alone would be sufficient to avoid
5871 Markku-Juhani's attack. (Actually it had never occurred
5872 to me that the half of 'md_local' used for chaining was the
5873 half from which PRNG output bytes were taken -- I had always
5874 assumed that the secret half would be used.) The second
5875 measure makes sure that additional data from 'state' is never
5876 mixed into 'md_local' in small portions; this heuristically
5877 further strengthens the PRNG.
5880 *) Fix crypto/bn/asm/mips3.s.
5883 *) When only the key is given to "enc", the IV is undefined. Print out
5884 an error message in this case.
5887 *) Handle special case when X509_NAME is empty in X509 printing routines.
5890 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
5891 positive and less than q.
5894 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
5895 used: it isn't thread safe and the add_lock_callback should handle
5897 [Paul Rose <Paul.Rose@bridge.com>]
5899 *) Verify that incoming data obeys the block size in
5900 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
5904 [Ulf Möller, Bodo Möller]
5906 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
5907 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
5908 when fixing the server behaviour for backwards-compatible 'client
5909 hello' messages. (Note that the attack is impractical against
5910 SSL 3.0 and TLS 1.0 anyway because length and version checking
5911 means that the probability of guessing a valid ciphertext is
5912 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
5915 Before 0.9.5, the countermeasure (hide the error by generating a
5916 random 'decryption result') did not work properly because
5917 ERR_clear_error() was missing, meaning that SSL_get_error() would
5918 detect the supposedly ignored error.
5920 Both problems are now fixed.
5923 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
5924 (previously it was 1024).
5927 *) Fix for compatibility mode trust settings: ignore trust settings
5928 unless some valid trust or reject settings are present.
5931 *) Fix for blowfish EVP: its a variable length cipher.
5934 *) Fix various bugs related to DSA S/MIME verification. Handle missing
5935 parameters in DSA public key structures and return an error in the
5936 DSA routines if parameters are absent.
5939 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
5940 in the current directory if neither $RANDFILE nor $HOME was set.
5941 RAND_file_name() in 0.9.6a returned NULL in this case. This has
5942 caused some confusion to Windows users who haven't defined $HOME.
5943 Thus RAND_file_name() is changed again: e_os.h can define a
5944 DEFAULT_HOME, which will be used if $HOME is not set.
5945 For Windows, we use "C:"; on other platforms, we still require
5946 environment variables.
5948 *) Move 'if (!initialized) RAND_poll()' into regions protected by
5949 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
5950 having multiple threads call RAND_poll() concurrently.
5953 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
5954 combination of a flag and a thread ID variable.
5955 Otherwise while one thread is in ssleay_rand_bytes (which sets the
5956 flag), *other* threads can enter ssleay_add_bytes without obeying
5957 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
5958 that they do not hold after the first thread unsets add_do_not_lock).
5961 *) Change bctest again: '-x' expressions are not available in all
5965 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
5967 *) Fix a couple of memory leaks in PKCS7_dataDecode()
5968 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
5970 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
5971 the default extension for executables, if any. Also, make the perl
5972 scripts that use symlink() to test if it really exists and use "cp"
5973 if it doesn't. All this made OpenSSL compilable and installable in
5977 *) Fix for asn1_GetSequence() for indefinite length constructed data.
5978 If SEQUENCE is length is indefinite just set c->slen to the total
5979 amount of data available.
5980 [Steve Henson, reported by shige@FreeBSD.org]
5981 [This change does not apply to 0.9.7.]
5983 *) Change bctest to avoid here-documents inside command substitution
5984 (workaround for FreeBSD /bin/sh bug).
5985 For compatibility with Ultrix, avoid shell functions (introduced
5986 in the bctest version that searches along $PATH).
5989 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
5990 with des_encrypt() defined on some operating systems, like Solaris
5994 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
5995 On the Importance of Eliminating Errors in Cryptographic
5996 Computations, J. Cryptology 14 (2001) 2, 101-119,
5997 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
6000 *) MIPS assembler BIGNUM division bug fix.
6003 *) Disabled incorrect Alpha assembler code.
6006 *) Fix PKCS#7 decode routines so they correctly update the length
6007 after reading an EOC for the EXPLICIT tag.
6009 [This change does not apply to 0.9.7.]
6011 *) Fix bug in PKCS#12 key generation routines. This was triggered
6012 if a 3DES key was generated with a 0 initial byte. Include
6013 PKCS12_BROKEN_KEYGEN compilation option to retain the old
6014 (but broken) behaviour.
6017 *) Enhance bctest to search for a working bc along $PATH and print
6019 [Tim Rice <tim@multitalents.net> via Richard Levitte]
6021 *) Fix memory leaks in err.c: free err_data string if necessary;
6022 don't write to the wrong index in ERR_set_error_data.
6025 *) Implement ssl23_peek (analogous to ssl23_read), which previously
6029 *) Replace rdtsc with _emit statements for VC++ version 5.
6030 [Jeremy Cooper <jeremy@baymoo.org>]
6032 *) Make it possible to reuse SSLv2 sessions.
6035 *) In copy_email() check for >= 0 as a return value for
6036 X509_NAME_get_index_by_NID() since 0 is a valid index.
6037 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
6039 *) Avoid coredump with unsupported or invalid public keys by checking if
6040 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
6041 PKCS7_verify() fails with non detached data.
6044 *) Don't use getenv in library functions when run as setuid/setgid.
6045 New function OPENSSL_issetugid().
6048 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
6049 due to incorrect handling of multi-threading:
6051 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
6053 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
6055 3. Count how many times MemCheck_off() has been called so that
6056 nested use can be treated correctly. This also avoids
6057 inband-signalling in the previous code (which relied on the
6058 assumption that thread ID 0 is impossible).
6061 *) Add "-rand" option also to s_client and s_server.
6064 *) Fix CPU detection on Irix 6.x.
6065 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
6066 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6068 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
6071 [This change does not apply to 0.9.7.]
6073 *) Use the cached encoding of an X509_NAME structure rather than
6074 copying it. This is apparently the reason for the libsafe "errors"
6075 but the code is actually correct.
6078 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
6079 Bleichenbacher's DSA attack.
6080 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
6081 to be set and top=0 forces the highest bit to be set; top=-1 is new
6082 and leaves the highest bit random.
6083 [Ulf Moeller, Bodo Moeller]
6085 *) In the NCONF_...-based implementations for CONF_... queries
6086 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
6087 a temporary CONF structure with the data component set to NULL
6088 (which gives segmentation faults in lh_retrieve).
6089 Instead, use NULL for the CONF pointer in CONF_get_string and
6090 CONF_get_number (which may use environment variables) and directly
6091 return NULL from CONF_get_section.
6094 *) Fix potential buffer overrun for EBCDIC.
6097 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
6098 keyUsage if basicConstraints absent for a CA.
6101 *) Make SMIME_write_PKCS7() write mail header values with a format that
6102 is more generally accepted (no spaces before the semicolon), since
6103 some programs can't parse those values properly otherwise. Also make
6104 sure BIO's that break lines after each write do not create invalid
6108 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
6109 macros previously used would not encode an empty SEQUENCE OF
6110 and break the signature.
6112 [This change does not apply to 0.9.7.]
6114 *) Zero the premaster secret after deriving the master secret in
6118 *) Add some EVP_add_digest_alias registrations (as found in
6119 OpenSSL_add_all_digests()) to SSL_library_init()
6120 aka OpenSSL_add_ssl_algorithms(). This provides improved
6121 compatibility with peers using X.509 certificates
6122 with unconventional AlgorithmIdentifier OIDs.
6125 *) Fix for Irix with NO_ASM.
6126 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
6128 *) ./config script fixes.
6129 [Ulf Moeller, Richard Levitte]
6131 *) Fix 'openssl passwd -1'.
6134 *) Change PKCS12_key_gen_asc() so it can cope with non null
6135 terminated strings whose length is passed in the passlen
6136 parameter, for example from PEM callbacks. This was done
6137 by adding an extra length parameter to asc2uni().
6138 [Steve Henson, reported by <oddissey@samsung.co.kr>]
6140 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
6141 call failed, free the DSA structure.
6144 *) Fix to uni2asc() to cope with zero length Unicode strings.
6145 These are present in some PKCS#12 files.
6148 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
6149 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
6150 when writing a 32767 byte record.
6151 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
6153 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
6154 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
6156 (RSA objects have a reference count access to which is protected
6157 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
6158 so they are meant to be shared between threads.)
6159 [Bodo Moeller, Geoff Thorpe; original patch submitted by
6160 "Reddie, Steven" <Steven.Reddie@ca.com>]
6162 *) Fix a deadlock in CRYPTO_mem_leaks().
6165 *) Use better test patterns in bntest.
6168 *) rand_win.c fix for Borland C.
6171 *) BN_rshift bugfix for n == 0.
6174 *) Add a 'bctest' script that checks for some known 'bc' bugs
6175 so that 'make test' does not abort just because 'bc' is broken.
6178 *) Store verify_result within SSL_SESSION also for client side to
6179 avoid potential security hole. (Re-used sessions on the client side
6180 always resulted in verify_result==X509_V_OK, not using the original
6181 result of the server certificate verification.)
6184 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
6185 SSL3_RT_APPLICATION_DATA, return 0.
6186 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
6190 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
6191 releases, have been re-implemented by renaming the previous
6192 implementations of ssl2_read and ssl3_read to ssl2_read_internal
6193 and ssl3_read_internal, respectively, and adding 'peek' parameters
6194 to them. The new ssl[23]_{read,peek} functions are calls to
6195 ssl[23]_read_internal with the 'peek' flag set appropriately.
6196 A 'peek' parameter has also been added to ssl3_read_bytes, which
6197 does the actual work for ssl3_read_internal.
6200 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
6201 the method-specific "init()" handler. Also clean up ex_data after
6202 calling the method-specific "finish()" handler. Previously, this was
6203 happening the other way round.
6206 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
6207 The previous value, 12, was not always sufficient for BN_mod_exp().
6210 *) Make sure that shared libraries get the internal name engine with
6211 the full version number and not just 0. This should mark the
6212 shared libraries as not backward compatible. Of course, this should
6213 be changed again when we can guarantee backward binary compatibility.
6216 *) Fix typo in get_cert_by_subject() in by_dir.c
6217 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
6219 *) Rework the system to generate shared libraries:
6221 - Make note of the expected extension for the shared libraries and
6222 if there is a need for symbolic links from for example libcrypto.so.0
6223 to libcrypto.so.0.9.7. There is extended info in Configure for
6226 - Make as few rebuilds of the shared libraries as possible.
6228 - Still avoid linking the OpenSSL programs with the shared libraries.
6230 - When installing, install the shared libraries separately from the
6234 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
6236 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
6237 and not in SSL_clear because the latter is also used by the
6238 accept/connect functions; previously, the settings made by
6239 SSL_set_read_ahead would be lost during the handshake.
6240 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
6242 *) Correct util/mkdef.pl to be selective about disabled algorithms.
6243 Previously, it would create entries for disableed algorithms no
6247 *) Added several new manual pages for SSL_* function.
6250 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
6252 *) In ssl23_get_client_hello, generate an error message when faced
6253 with an initial SSL 3.0/TLS record that is too small to contain the
6254 first two bytes of the ClientHello message, i.e. client_version.
6255 (Note that this is a pathologic case that probably has never happened
6256 in real life.) The previous approach was to use the version number
6257 from the record header as a substitute; but our protocol choice
6258 should not depend on that one because it is not authenticated
6259 by the Finished messages.
6262 *) More robust randomness gathering functions for Windows.
6263 [Jeffrey Altman <jaltman@columbia.edu>]
6265 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
6266 not set then we don't setup the error code for issuer check errors
6267 to avoid possibly overwriting other errors which the callback does
6268 handle. If an application does set the flag then we assume it knows
6269 what it is doing and can handle the new informational codes
6273 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
6274 a general "ANY" type, as such it should be able to decode anything
6275 including tagged types. However it didn't check the class so it would
6276 wrongly interpret tagged types in the same way as their universal
6277 counterpart and unknown types were just rejected. Changed so that the
6278 tagged and unknown types are handled in the same way as a SEQUENCE:
6279 that is the encoding is stored intact. There is also a new type
6280 "V_ASN1_OTHER" which is used when the class is not universal, in this
6281 case we have no idea what the actual type is so we just lump them all
6285 *) On VMS, stdout may very well lead to a file that is written to
6286 in a record-oriented fashion. That means that every write() will
6287 write a separate record, which will be read separately by the
6288 programs trying to read from it. This can be very confusing.
6290 The solution is to put a BIO filter in the way that will buffer
6291 text until a linefeed is reached, and then write everything a
6292 line at a time, so every record written will be an actual line,
6293 not chunks of lines and not (usually doesn't happen, but I've
6294 seen it once) several lines in one record. BIO_f_linebuffer() is
6297 Currently, it's a VMS-only method, because that's where it has
6298 been tested well enough.
6301 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
6302 it can return incorrect results.
6303 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
6304 but it was in 0.9.6-beta[12].)
6307 *) Disable the check for content being present when verifying detached
6308 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
6309 include zero length content when signing messages.
6312 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
6313 BIO_ctrl (for BIO pairs).
6316 *) Add DSO method for VMS.
6319 *) Bug fix: Montgomery multiplication could produce results with the
6323 *) Add RPM specification openssl.spec and modify it to build three
6324 packages. The default package contains applications, application
6325 documentation and run-time libraries. The devel package contains
6326 include files, static libraries and function documentation. The
6327 doc package contains the contents of the doc directory. The original
6328 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
6331 *) Add a large number of documentation files for many SSL routines.
6332 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
6334 *) Add a configuration entry for Sony News 4.
6335 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
6337 *) Don't set the two most significant bits to one when generating a
6338 random number < q in the DSA library.
6341 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
6342 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
6343 the underlying transport is blocking) if a handshake took place.
6344 (The default behaviour is needed by applications such as s_client
6345 and s_server that use select() to determine when to use SSL_read;
6346 but for applications that know in advance when to expect data, it
6347 just makes things more complicated.)
6350 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
6354 *) Add a few more EBCDIC conditionals that make `req' and `x509'
6355 work better on such systems.
6356 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6358 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
6359 Update PKCS12_parse() so it copies the friendlyName and the
6360 keyid to the certificates aux info.
6363 *) Fix bug in PKCS7_verify() which caused an infinite loop
6364 if there was more than one signature.
6365 [Sven Uszpelkat <su@celocom.de>]
6367 *) Major change in util/mkdef.pl to include extra information
6368 about each symbol, as well as presentig variables as well
6369 as functions. This change means that there's n more need
6370 to rebuild the .num files when some algorithms are excluded.
6373 *) Allow the verify time to be set by an application,
6374 rather than always using the current time.
6377 *) Phase 2 verify code reorganisation. The certificate
6378 verify code now looks up an issuer certificate by a
6379 number of criteria: subject name, authority key id
6380 and key usage. It also verifies self signed certificates
6381 by the same criteria. The main comparison function is
6382 X509_check_issued() which performs these checks.
6384 Lot of changes were necessary in order to support this
6385 without completely rewriting the lookup code.
6387 Authority and subject key identifier are now cached.
6389 The LHASH 'certs' is X509_STORE has now been replaced
6390 by a STACK_OF(X509_OBJECT). This is mainly because an
6391 LHASH can't store or retrieve multiple objects with
6392 the same hash value.
6394 As a result various functions (which were all internal
6395 use only) have changed to handle the new X509_STORE
6396 structure. This will break anything that messed round
6397 with X509_STORE internally.
6399 The functions X509_STORE_add_cert() now checks for an
6400 exact match, rather than just subject name.
6402 The X509_STORE API doesn't directly support the retrieval
6403 of multiple certificates matching a given criteria, however
6404 this can be worked round by performing a lookup first
6405 (which will fill the cache with candidate certificates)
6406 and then examining the cache for matches. This is probably
6407 the best we can do without throwing out X509_LOOKUP
6408 entirely (maybe later...).
6410 The X509_VERIFY_CTX structure has been enhanced considerably.
6412 All certificate lookup operations now go via a get_issuer()
6413 callback. Although this currently uses an X509_STORE it
6414 can be replaced by custom lookups. This is a simple way
6415 to bypass the X509_STORE hackery necessary to make this
6416 work and makes it possible to use more efficient techniques
6417 in future. A very simple version which uses a simple
6418 STACK for its trusted certificate store is also provided
6419 using X509_STORE_CTX_trusted_stack().
6421 The verify_cb() and verify() callbacks now have equivalents
6422 in the X509_STORE_CTX structure.
6424 X509_STORE_CTX also has a 'flags' field which can be used
6425 to customise the verify behaviour.
6428 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
6429 excludes S/MIME capabilities.
6432 *) When a certificate request is read in keep a copy of the
6433 original encoding of the signed data and use it when outputing
6434 again. Signatures then use the original encoding rather than
6435 a decoded, encoded version which may cause problems if the
6436 request is improperly encoded.
6439 *) For consistency with other BIO_puts implementations, call
6440 buffer_write(b, ...) directly in buffer_puts instead of calling
6443 In BIO_puts, increment b->num_write as in BIO_write.
6444 [Peter.Sylvester@EdelWeb.fr]
6446 *) Fix BN_mul_word for the case where the word is 0. (We have to use
6447 BN_zero, we may not return a BIGNUM with an array consisting of
6451 *) Avoid calling abort() from within the library when problems are
6452 detected, except if preprocessor symbols have been defined
6453 (such as REF_CHECK, BN_DEBUG etc.).
6456 *) New openssl application 'rsautl'. This utility can be
6457 used for low level RSA operations. DER public key
6458 BIO/fp routines also added.
6461 *) New Configure entry and patches for compiling on QNX 4.
6462 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
6464 *) A demo state-machine implementation was sponsored by
6465 Nuron (http://www.nuron.com/) and is now available in
6466 demos/state_machine.
6469 *) New options added to the 'dgst' utility for signature
6470 generation and verification.
6473 *) Unrecognized PKCS#7 content types are now handled via a
6474 catch all ASN1_TYPE structure. This allows unsupported
6475 types to be stored as a "blob" and an application can
6476 encode and decode it manually.
6479 *) Fix various signed/unsigned issues to make a_strex.c
6481 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
6483 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
6484 length if passed a buffer. ASN1_INTEGER_to_BN failed
6485 if passed a NULL BN and its argument was negative.
6486 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
6488 *) Modification to PKCS#7 encoding routines to output definite
6489 length encoding. Since currently the whole structures are in
6490 memory there's not real point in using indefinite length
6491 constructed encoding. However if OpenSSL is compiled with
6492 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
6495 *) Added BIO_vprintf() and BIO_vsnprintf().
6498 *) Added more prefixes to parse for in the the strings written
6499 through a logging bio, to cover all the levels that are available
6500 through syslog. The prefixes are now:
6502 PANIC, EMERG, EMR => LOG_EMERG
6503 ALERT, ALR => LOG_ALERT
6504 CRIT, CRI => LOG_CRIT
6505 ERROR, ERR => LOG_ERR
6506 WARNING, WARN, WAR => LOG_WARNING
6507 NOTICE, NOTE, NOT => LOG_NOTICE
6508 INFO, INF => LOG_INFO
6509 DEBUG, DBG => LOG_DEBUG
6511 and as before, if none of those prefixes are present at the
6512 beginning of the string, LOG_ERR is chosen.
6514 On Win32, the LOG_* levels are mapped according to this:
6516 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
6517 LOG_WARNING => EVENTLOG_WARNING_TYPE
6518 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
6522 *) Made it possible to reconfigure with just the configuration
6523 argument "reconf" or "reconfigure". The command line arguments
6524 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
6525 and are retrieved from there when reconfiguring.
6529 [Assar Westerlund <assar@sics.se>, Richard Levitte]
6531 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
6534 *) The obj_dat.pl script was messing up the sorting of object
6535 names. The reason was that it compared the quoted version
6536 of strings as a result "OCSP" > "OCSP Signing" because
6537 " > SPACE. Changed script to store unquoted versions of
6538 names and add quotes on output. It was also omitting some
6539 names from the lookup table if they were given a default
6540 value (that is if SN is missing it is given the same
6541 value as LN and vice versa), these are now added on the
6542 grounds that if an object has a name we should be able to
6543 look it up. Finally added warning output when duplicate
6544 short or long names are found.
6547 *) Changes needed for Tandem NSK.
6548 [Scott Uroff <scott@xypro.com>]
6550 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
6551 RSA_padding_check_SSLv23(), special padding was never detected
6552 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
6553 version rollback attacks was not effective.
6555 In s23_clnt.c, don't use special rollback-attack detection padding
6556 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
6557 client; similarly, in s23_srvr.c, don't do the rollback check if
6558 SSL 2.0 is the only protocol enabled in the server.
6561 *) Make it possible to get hexdumps of unprintable data with 'openssl
6562 asn1parse'. By implication, the functions ASN1_parse_dump() and
6563 BIO_dump_indent() are added.
6566 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
6567 these print out strings and name structures based on various
6568 flags including RFC2253 support and proper handling of
6569 multibyte characters. Added options to the 'x509' utility
6570 to allow the various flags to be set.
6573 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
6574 Also change the functions X509_cmp_current_time() and
6575 X509_gmtime_adj() work with an ASN1_TIME structure,
6576 this will enable certificates using GeneralizedTime in validity
6577 dates to be checked.
6580 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
6581 negative public key encodings) on by default,
6582 NO_NEG_PUBKEY_BUG can be set to disable it.
6585 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
6586 content octets. An i2c_ASN1_OBJECT is unnecessary because
6587 the encoding can be trivially obtained from the structure.
6590 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
6591 not read locks (CRYPTO_r_[un]lock).
6594 *) A first attempt at creating official support for shared
6595 libraries through configuration. I've kept it so the
6596 default is static libraries only, and the OpenSSL programs
6597 are always statically linked for now, but there are
6598 preparations for dynamic linking in place.
6599 This has been tested on Linux and Tru64.
6602 *) Randomness polling function for Win9x, as described in:
6603 Peter Gutmann, Software Generation of Practically Strong
6607 *) Fix so PRNG is seeded in req if using an already existing
6611 *) New options to smime application. -inform and -outform
6612 allow alternative formats for the S/MIME message including
6613 PEM and DER. The -content option allows the content to be
6614 specified separately. This should allow things like Netscape
6615 form signing output easier to verify.
6618 *) Fix the ASN1 encoding of tags using the 'long form'.
6621 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
6622 STRING types. These convert content octets to and from the
6623 underlying type. The actual tag and length octets are
6624 already assumed to have been read in and checked. These
6625 are needed because all other string types have virtually
6626 identical handling apart from the tag. By having versions
6627 of the ASN1 functions that just operate on content octets
6628 IMPLICIT tagging can be handled properly. It also allows
6629 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
6630 and ASN1_INTEGER are identical apart from the tag.
6633 *) Change the handling of OID objects as follows:
6635 - New object identifiers are inserted in objects.txt, following
6636 the syntax given in objects.README.
6637 - objects.pl is used to process obj_mac.num and create a new
6639 - obj_dat.pl is used to create a new obj_dat.h, using the data in
6642 This is currently kind of a hack, and the perl code in objects.pl
6643 isn't very elegant, but it works as I intended. The simplest way
6644 to check that it worked correctly is to look in obj_dat.h and
6645 check the array nid_objs and make sure the objects haven't moved
6646 around (this is important!). Additions are OK, as well as
6647 consistent name changes.
6650 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
6653 *) Addition of the command line parameter '-rand file' to 'openssl req'.
6654 The given file adds to whatever has already been seeded into the
6655 random pool through the RANDFILE configuration file option or
6656 environment variable, or the default random state file.
6659 *) mkstack.pl now sorts each macro group into lexical order.
6660 Previously the output order depended on the order the files
6661 appeared in the directory, resulting in needless rewriting
6665 *) Patches to make OpenSSL compile under Win32 again. Mostly
6666 work arounds for the VC++ problem that it treats func() as
6667 func(void). Also stripped out the parts of mkdef.pl that
6668 added extra typesafe functions: these no longer exist.
6671 *) Reorganisation of the stack code. The macros are now all
6672 collected in safestack.h . Each macro is defined in terms of
6673 a "stack macro" of the form SKM_<name>(type, a, b). The
6674 DEBUG_SAFESTACK is now handled in terms of function casts,
6675 this has the advantage of retaining type safety without the
6676 use of additional functions. If DEBUG_SAFESTACK is not defined
6677 then the non typesafe macros are used instead. Also modified the
6678 mkstack.pl script to handle the new form. Needs testing to see
6679 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
6680 the default if no major problems. Similar behaviour for ASN1_SET_OF
6681 and PKCS12_STACK_OF.
6684 *) When some versions of IIS use the 'NET' form of private key the
6685 key derivation algorithm is different. Normally MD5(password) is
6686 used as a 128 bit RC4 key. In the modified case
6687 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
6688 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
6689 as the old Netscape_RSA functions except they have an additional
6690 'sgckey' parameter which uses the modified algorithm. Also added
6691 an -sgckey command line option to the rsa utility. Thanks to
6692 Adrian Peck <bertie@ncipher.com> for posting details of the modified
6693 algorithm to openssl-dev.
6696 *) The evp_local.h macros were using 'c.##kname' which resulted in
6697 invalid expansion on some systems (SCO 5.0.5 for example).
6698 Corrected to 'c.kname'.
6699 [Phillip Porch <root@theporch.com>]
6701 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
6702 a STACK of email addresses from a certificate or request, these look
6703 in the subject name and the subject alternative name extensions and
6704 omit any duplicate addresses.
6707 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
6708 This makes DSA verification about 2 % faster.
6711 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
6712 (meaning that now 2^5 values will be precomputed, which is only 4 KB
6713 plus overhead for 1024 bit moduli).
6714 This makes exponentiations about 0.5 % faster for 1024 bit
6715 exponents (as measured by "openssl speed rsa2048").
6718 *) Rename memory handling macros to avoid conflicts with other
6720 Malloc => OPENSSL_malloc
6721 Malloc_locked => OPENSSL_malloc_locked
6722 Realloc => OPENSSL_realloc
6723 Free => OPENSSL_free
6726 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
6727 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
6730 *) CygWin32 support.
6731 [John Jarvie <jjarvie@newsguy.com>]
6733 *) The type-safe stack code has been rejigged. It is now only compiled
6734 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
6735 by default all type-specific stack functions are "#define"d back to
6736 standard stack functions. This results in more streamlined output
6737 but retains the type-safety checking possibilities of the original
6741 *) The STACK code has been cleaned up, and certain type declarations
6742 that didn't make a lot of sense have been brought in line. This has
6743 also involved a cleanup of sorts in safestack.h to more correctly
6744 map type-safe stack functions onto their plain stack counterparts.
6745 This work has also resulted in a variety of "const"ifications of
6746 lots of the code, especially "_cmp" operations which should normally
6747 be prototyped with "const" parameters anyway.
6750 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
6751 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
6752 (The PRNG state consists of two parts, the large pool 'state' and 'md',
6753 where all of 'md' is used each time the PRNG is used, but 'state'
6754 is used only indexed by a cyclic counter. As entropy may not be
6755 well distributed from the beginning, 'md' is important as a
6756 chaining variable. However, the output function chains only half
6757 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
6758 all of 'md', and seeding with STATE_SIZE dummy bytes will result
6759 in all of 'state' being rewritten, with the new values depending
6760 on virtually all of 'md'. This overcomes the 80 bit limitation.)
6763 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
6764 the handshake is continued after ssl_verify_cert_chain();
6765 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
6766 can lead to 'unexplainable' connection aborts later.
6767 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
6769 *) Major EVP API cipher revision.
6770 Add hooks for extra EVP features. This allows various cipher
6771 parameters to be set in the EVP interface. Support added for variable
6772 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
6773 setting of RC2 and RC5 parameters.
6775 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
6778 Remove lots of duplicated code from the EVP library. For example *every*
6779 cipher init() function handles the 'iv' in the same way according to the
6780 cipher mode. They also all do nothing if the 'key' parameter is NULL and
6781 for CFB and OFB modes they zero ctx->num.
6783 New functionality allows removal of S/MIME code RC2 hack.
6785 Most of the routines have the same form and so can be declared in terms
6788 By shifting this to the top level EVP_CipherInit() it can be removed from
6789 all individual ciphers. If the cipher wants to handle IVs or keys
6790 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
6793 Change lots of functions like EVP_EncryptUpdate() to now return a
6794 value: although software versions of the algorithms cannot fail
6795 any installed hardware versions can.
6798 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
6799 this option is set, tolerate broken clients that send the negotiated
6800 protocol version number instead of the requested protocol version
6804 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
6805 i.e. non-zero for export ciphersuites, zero otherwise.
6806 Previous versions had this flag inverted, inconsistent with
6807 rsa_tmp_cb (..._TMP_RSA_CB).
6808 [Bodo Moeller; problem reported by Amit Chopra]
6810 *) Add missing DSA library text string. Work around for some IIS
6811 key files with invalid SEQUENCE encoding.
6814 *) Add a document (doc/standards.txt) that list all kinds of standards
6815 and so on that are implemented in OpenSSL.
6818 *) Enhance c_rehash script. Old version would mishandle certificates
6819 with the same subject name hash and wouldn't handle CRLs at all.
6820 Added -fingerprint option to crl utility, to support new c_rehash
6824 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
6827 *) Fix for SSL server purpose checking. Server checking was
6828 rejecting certificates which had extended key usage present
6829 but no ssl client purpose.
6830 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
6832 *) Make PKCS#12 code work with no password. The PKCS#12 spec
6833 is a little unclear about how a blank password is handled.
6834 Since the password in encoded as a BMPString with terminating
6835 double NULL a zero length password would end up as just the
6836 double NULL. However no password at all is different and is
6837 handled differently in the PKCS#12 key generation code. NS
6838 treats a blank password as zero length. MSIE treats it as no
6839 password on export: but it will try both on import. We now do
6840 the same: PKCS12_parse() tries zero length and no password if
6841 the password is set to "" or NULL (NULL is now a valid password:
6842 it wasn't before) as does the pkcs12 application.
6845 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
6846 perror when PEM_read_bio_X509_REQ fails, the error message must
6847 be obtained from the error queue.
6850 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
6851 it in ERR_remove_state if appropriate, and change ERR_get_state
6852 accordingly to avoid race conditions (this is necessary because
6853 thread_hash is no longer constant once set).
6856 *) Bugfix for linux-elf makefile.one.
6859 *) RSA_get_default_method() will now cause a default
6860 RSA_METHOD to be chosen if one doesn't exist already.
6861 Previously this was only set during a call to RSA_new()
6862 or RSA_new_method(NULL) meaning it was possible for
6863 RSA_get_default_method() to return NULL.
6866 *) Added native name translation to the existing DSO code
6867 that will convert (if the flag to do so is set) filenames
6868 that are sufficiently small and have no path information
6869 into a canonical native form. Eg. "blah" converted to
6870 "libblah.so" or "blah.dll" etc.
6873 *) New function ERR_error_string_n(e, buf, len) which is like
6874 ERR_error_string(e, buf), but writes at most 'len' bytes
6875 including the 0 terminator. For ERR_error_string_n, 'buf'
6877 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
6879 *) CONF library reworked to become more general. A new CONF
6880 configuration file reader "class" is implemented as well as a
6881 new functions (NCONF_*, for "New CONF") to handle it. The now
6882 old CONF_* functions are still there, but are reimplemented to
6883 work in terms of the new functions. Also, a set of functions
6884 to handle the internal storage of the configuration data is
6885 provided to make it easier to write new configuration file
6886 reader "classes" (I can definitely see something reading a
6887 configuration file in XML format, for example), called _CONF_*,
6888 or "the configuration storage API"...
6890 The new configuration file reading functions are:
6892 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
6893 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
6895 NCONF_default, NCONF_WIN32
6897 NCONF_dump_fp, NCONF_dump_bio
6899 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
6900 NCONF_new creates a new CONF object. This works in the same way
6901 as other interfaces in OpenSSL, like the BIO interface.
6902 NCONF_dump_* dump the internal storage of the configuration file,
6903 which is useful for debugging. All other functions take the same
6904 arguments as the old CONF_* functions wth the exception of the
6905 first that must be a `CONF *' instead of a `LHASH *'.
6907 To make it easer to use the new classes with the old CONF_* functions,
6908 the function CONF_set_default_method is provided.
6911 *) Add '-tls1' option to 'openssl ciphers', which was already
6912 mentioned in the documentation but had not been implemented.
6913 (This option is not yet really useful because even the additional
6914 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
6917 *) Initial DSO code added into libcrypto for letting OpenSSL (and
6918 OpenSSL-based applications) load shared libraries and bind to
6919 them in a portable way.
6920 [Geoff Thorpe, with contributions from Richard Levitte]
6922 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
6924 *) Make sure _lrotl and _lrotr are only used with MSVC.
6926 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
6927 (the default implementation of RAND_status).
6929 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
6930 to '-clrext' (= clear extensions), as intended and documented.
6931 [Bodo Moeller; inconsistency pointed out by Michael Attili
6934 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
6935 was larger than the MD block size.
6936 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
6938 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
6939 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
6940 using the passed key: if the passed key was a private key the result
6941 of X509_print(), for example, would be to print out all the private key
6945 *) des_quad_cksum() byte order bug fix.
6946 [Ulf Möller, using the problem description in krb4-0.9.7, where
6947 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
6949 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
6951 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
6953 *) For easily testing in shell scripts whether some command
6954 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
6955 returns with exit code 0 iff no command of the given name is available.
6956 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
6957 the output goes to stdout and nothing is printed to stderr.
6958 Additional arguments are always ignored.
6960 Since for each cipher there is a command of the same name,
6961 the 'no-cipher' compilation switches can be tested this way.
6963 ('openssl no-XXX' is not able to detect pseudo-commands such
6964 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
6967 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
6970 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
6971 is set; it will be thrown away anyway because each handshake creates
6973 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
6974 to parameters -- in previous versions (since OpenSSL 0.9.3) the
6975 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
6976 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
6979 *) New s_client option -ign_eof: EOF at stdin is ignored, and
6980 'Q' and 'R' lose their special meanings (quit/renegotiate).
6981 This is part of what -quiet does; unlike -quiet, -ign_eof
6982 does not suppress any output.
6985 *) Add compatibility options to the purpose and trust code. The
6986 purpose X509_PURPOSE_ANY is "any purpose" which automatically
6987 accepts a certificate or CA, this was the previous behaviour,
6988 with all the associated security issues.
6990 X509_TRUST_COMPAT is the old trust behaviour: only and
6991 automatically trust self signed roots in certificate store. A
6992 new trust setting X509_TRUST_DEFAULT is used to specify that
6993 a purpose has no associated trust setting and it should instead
6994 use the value in the default purpose.
6997 *) Fix the PKCS#8 DSA private key code so it decodes keys again
6998 and fix a memory leak.
7001 *) In util/mkerr.pl (which implements 'make errors'), preserve
7002 reason strings from the previous version of the .c file, as
7003 the default to have only downcase letters (and digits) in
7004 automatically generated reasons codes is not always appropriate.
7007 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
7008 using strerror. Previously, ERR_reason_error_string() returned
7009 library names as reason strings for SYSerr; but SYSerr is a special
7010 case where small numbers are errno values, not library numbers.
7013 *) Add '-dsaparam' option to 'openssl dhparam' application. This
7014 converts DSA parameters into DH parameters. (When creating parameters,
7015 DSA_generate_parameters is used.)
7018 *) Include 'length' (recommended exponent length) in C code generated
7019 by 'openssl dhparam -C'.
7022 *) The second argument to set_label in perlasm was already being used
7023 so couldn't be used as a "file scope" flag. Moved to third argument
7027 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
7028 instead of RAND_bytes for encryption IVs and salts.
7031 *) Include RAND_status() into RAND_METHOD instead of implementing
7032 it only for md_rand.c Otherwise replacing the PRNG by calling
7033 RAND_set_rand_method would be impossible.
7036 *) Don't let DSA_generate_key() enter an infinite loop if the random
7037 number generation fails.
7040 *) New 'rand' application for creating pseudo-random output.
7043 *) Added configuration support for Linux/IA64
7044 [Rolf Haberrecker <rolf@suse.de>]
7046 *) Assembler module support for Mingw32.
7049 *) Shared library support for HPUX (in shlib/).
7050 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
7052 *) Shared library support for Solaris gcc.
7053 [Lutz Behnke <behnke@trustcenter.de>]
7055 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
7057 *) PKCS7_encrypt() was adding text MIME headers twice because they
7058 were added manually and by SMIME_crlf_copy().
7061 *) In bntest.c don't call BN_rand with zero bits argument.
7062 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
7064 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
7065 case was implemented. This caused BN_div_recp() to fail occasionally.
7068 *) Add an optional second argument to the set_label() in the perl
7069 assembly language builder. If this argument exists and is set
7070 to 1 it signals that the assembler should use a symbol whose
7071 scope is the entire file, not just the current function. This
7072 is needed with MASM which uses the format label:: for this scope.
7073 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
7075 *) Change the ASN1 types so they are typedefs by default. Before
7076 almost all types were #define'd to ASN1_STRING which was causing
7077 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
7081 *) Change names of new functions to the new get1/get0 naming
7082 convention: After 'get1', the caller owns a reference count
7083 and has to call ..._free; 'get0' returns a pointer to some
7084 data structure without incrementing reference counters.
7085 (Some of the existing 'get' functions increment a reference
7086 counter, some don't.)
7087 Similarly, 'set1' and 'add1' functions increase reference
7088 counters or duplicate objects.
7091 *) Allow for the possibility of temp RSA key generation failure:
7092 the code used to assume it always worked and crashed on failure.
7095 *) Fix potential buffer overrun problem in BIO_printf().
7096 [Ulf Möller, using public domain code by Patrick Powell; problem
7097 pointed out by David Sacerdote <das33@cornell.edu>]
7099 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
7100 RAND_egd() and RAND_status(). In the command line application,
7101 the EGD socket can be specified like a seed file using RANDFILE
7105 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
7106 Some CAs (e.g. Verisign) distribute certificates in this form.
7109 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
7110 list to exclude them. This means that no special compilation option
7111 is needed to use anonymous DH: it just needs to be included in the
7115 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
7116 EVP_MD_type. The old functionality is available in a new macro called
7117 EVP_MD_md(). Change code that uses it and update docs.
7120 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
7121 where the 'void *' argument is replaced by a function pointer argument.
7122 Previously 'void *' was abused to point to functions, which works on
7123 many platforms, but is not correct. As these functions are usually
7124 called by macros defined in OpenSSL header files, most source code
7125 should work without changes.
7128 *) <openssl/opensslconf.h> (which is created by Configure) now contains
7129 sections with information on -D... compiler switches used for
7130 compiling the library so that applications can see them. To enable
7131 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
7132 must be defined. E.g.,
7133 #define OPENSSL_ALGORITHM_DEFINES
7134 #include <openssl/opensslconf.h>
7135 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
7136 [Richard Levitte, Ulf and Bodo Möller]
7138 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
7142 *) Change the 'other' type in certificate aux info to a STACK_OF
7143 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
7144 the required ASN1 format: arbitrary types determined by an OID.
7147 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
7148 argument to 'req'. This is not because the function is newer or
7149 better than others it just uses the work 'NEW' in the certificate
7150 request header lines. Some software needs this.
7153 *) Reorganise password command line arguments: now passwords can be
7154 obtained from various sources. Delete the PEM_cb function and make
7155 it the default behaviour: i.e. if the callback is NULL and the
7156 usrdata argument is not NULL interpret it as a null terminated pass
7157 phrase. If usrdata and the callback are NULL then the pass phrase
7158 is prompted for as usual.
7161 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
7162 the support is automatically enabled. The resulting binaries will
7163 autodetect the card and use it if present.
7164 [Ben Laurie and Compaq Inc.]
7166 *) Work around for Netscape hang bug. This sends certificate request
7167 and server done in one record. Since this is perfectly legal in the
7168 SSL/TLS protocol it isn't a "bug" option and is on by default. See
7169 the bugs/SSLv3 entry for more info.
7172 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
7175 *) Add -rand argument to smime and pkcs12 applications and read/write
7179 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
7182 *) Add command line password options to the remaining applications.
7185 *) Bug fix for BN_div_recp() for numerators with an even number of
7189 *) More tests in bntest.c, and changed test_bn output.
7192 *) ./config recognizes MacOS X now.
7195 *) Bug fix for BN_div() when the first words of num and divsor are
7196 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
7199 *) Add support for various broken PKCS#8 formats, and command line
7200 options to produce them.
7203 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
7204 get temporary BIGNUMs from a BN_CTX.
7207 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
7211 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
7212 include a #define from the old name to the new. The original intent
7213 was that statically linked binaries could for example just call
7214 SSLeay_add_all_ciphers() to just add ciphers to the table and not
7215 link with digests. This never worked becayse SSLeay_add_all_digests()
7216 and SSLeay_add_all_ciphers() were in the same source file so calling
7217 one would link with the other. They are now in separate source files.
7220 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
7223 *) Use a less unusual form of the Miller-Rabin primality test (it used
7224 a binary algorithm for exponentiation integrated into the Miller-Rabin
7225 loop, our standard modexp algorithms are faster).
7228 *) Support for the EBCDIC character set completed.
7229 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
7231 *) Source code cleanups: use const where appropriate, eliminate casts,
7232 use void * instead of char * in lhash.
7235 *) Bugfix: ssl3_send_server_key_exchange was not restartable
7236 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
7237 this the server could overwrite ephemeral keys that the client
7241 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
7242 using 50 iterations of the Rabin-Miller test.
7244 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
7245 iterations of the Rabin-Miller test as required by the appendix
7246 to FIPS PUB 186[-1]) instead of DSA_is_prime.
7247 As BN_is_prime_fasttest includes trial division, DSA parameter
7248 generation becomes much faster.
7250 This implies a change for the callback functions in DSA_is_prime
7251 and DSA_generate_parameters: The callback function is called once
7252 for each positive witness in the Rabin-Miller test, not just
7253 occasionally in the inner loop; and the parameters to the
7254 callback function now provide an iteration count for the outer
7255 loop rather than for the current invocation of the inner loop.
7256 DSA_generate_parameters additionally can call the callback
7257 function with an 'iteration count' of -1, meaning that a
7258 candidate has passed the trial division test (when q is generated
7259 from an application-provided seed, trial division is skipped).
7262 *) New function BN_is_prime_fasttest that optionally does trial
7263 division before starting the Rabin-Miller test and has
7264 an additional BN_CTX * argument (whereas BN_is_prime always
7265 has to allocate at least one BN_CTX).
7266 'callback(1, -1, cb_arg)' is called when a number has passed the
7267 trial division stage.
7270 *) Fix for bug in CRL encoding. The validity dates weren't being handled
7274 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
7277 *) New function BN_pseudo_rand().
7280 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
7281 bignum version of BN_from_montgomery() with the working code from
7282 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
7286 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
7287 made it impossible to use the same SSL_SESSION data structure in
7288 SSL2 clients in multiple threads.
7291 *) The return value of RAND_load_file() no longer counts bytes obtained
7292 by stat(). RAND_load_file(..., -1) is new and uses the complete file
7293 to seed the PRNG (previously an explicit byte count was required).
7294 [Ulf Möller, Bodo Möller]
7296 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
7297 used (char *) instead of (void *) and had casts all over the place.
7300 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
7303 *) Retain source code compatibility for BN_prime_checks macro:
7304 BN_is_prime(..., BN_prime_checks, ...) now uses
7305 BN_prime_checks_for_size to determine the appropriate number of
7306 Rabin-Miller iterations.
7309 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
7310 DH_CHECK_P_NOT_SAFE_PRIME.
7311 (Check if this is true? OpenPGP calls them "strong".)
7314 *) Merge the functionality of "dh" and "gendh" programs into a new program
7315 "dhparam". The old programs are retained for now but will handle DH keys
7316 (instead of parameters) in future.
7319 *) Make the ciphers, s_server and s_client programs check the return values
7320 when a new cipher list is set.
7323 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
7324 ciphers. Before when the 56bit ciphers were enabled the sorting was
7327 The syntax for the cipher sorting has been extended to support sorting by
7328 cipher-strength (using the strength_bits hard coded in the tables).
7329 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
7331 Fix a bug in the cipher-command parser: when supplying a cipher command
7332 string with an "undefined" symbol (neither command nor alphanumeric
7333 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
7334 an error is flagged.
7336 Due to the strength-sorting extension, the code of the
7337 ssl_create_cipher_list() function was completely rearranged. I hope that
7338 the readability was also increased :-)
7339 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
7341 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
7342 for the first serial number and places 2 in the serial number file. This
7343 avoids problems when the root CA is created with serial number zero and
7344 the first user certificate has the same issuer name and serial number
7348 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
7349 the new code. Add documentation for this stuff.
7352 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
7353 X509_*() to X509at_*() on the grounds that they don't handle X509
7354 structures and behave in an analagous way to the X509v3 functions:
7355 they shouldn't be called directly but wrapper functions should be used
7358 So we also now have some wrapper functions that call the X509at functions
7359 when passed certificate requests. (TO DO: similar things can be done with
7360 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
7361 things. Some of these need some d2i or i2d and print functionality
7362 because they handle more complex structures.)
7365 *) Add missing #ifndefs that caused missing symbols when building libssl
7366 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
7367 NO_RSA in ssl/s2*.c.
7368 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
7370 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
7371 has a return value which indicates the quality of the random data
7372 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
7373 error queue. New function RAND_pseudo_bytes() generates output that is
7374 guaranteed to be unique but not unpredictable. RAND_add is like
7375 RAND_seed, but takes an extra argument for an entropy estimate
7376 (RAND_seed always assumes full entropy).
7379 *) Do more iterations of Rabin-Miller probable prime test (specifically,
7380 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
7381 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
7382 in crypto/bn/bn_prime.c for the complete table). This guarantees a
7383 false-positive rate of at most 2^-80 for random input.
7386 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
7389 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
7390 in the 0.9.5 release), this returns the chain
7391 from an X509_CTX structure with a dup of the stack and all
7392 the X509 reference counts upped: so the stack will exist
7393 after X509_CTX_cleanup() has been called. Modify pkcs12.c
7396 Also make SSL_SESSION_print() print out the verify return
7400 *) Add manpage for the pkcs12 command. Also change the default
7401 behaviour so MAC iteration counts are used unless the new
7402 -nomaciter option is used. This improves file security and
7403 only older versions of MSIE (4.0 for example) need it.
7406 *) Honor the no-xxx Configure options when creating .DEF files.
7409 *) Add PKCS#10 attributes to field table: challengePassword,
7410 unstructuredName and unstructuredAddress. These are taken from
7411 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
7412 international characters are used.
7414 More changes to X509_ATTRIBUTE code: allow the setting of types
7415 based on strings. Remove the 'loc' parameter when adding
7416 attributes because these will be a SET OF encoding which is sorted
7420 *) Initial changes to the 'req' utility to allow request generation
7421 automation. This will allow an application to just generate a template
7422 file containing all the field values and have req construct the
7425 Initial support for X509_ATTRIBUTE handling. Stacks of these are
7426 used all over the place including certificate requests and PKCS#7
7427 structures. They are currently handled manually where necessary with
7428 some primitive wrappers for PKCS#7. The new functions behave in a
7429 manner analogous to the X509 extension functions: they allow
7430 attributes to be looked up by NID and added.
7432 Later something similar to the X509V3 code would be desirable to
7433 automatically handle the encoding, decoding and printing of the
7434 more complex types. The string types like challengePassword can
7435 be handled by the string table functions.
7437 Also modified the multi byte string table handling. Now there is
7438 a 'global mask' which masks out certain types. The table itself
7439 can use the flag STABLE_NO_MASK to ignore the mask setting: this
7440 is useful when for example there is only one permissible type
7441 (as in countryName) and using the mask might result in no valid
7445 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
7446 SSL_get_peer_finished to allow applications to obtain the latest
7447 Finished messages sent to the peer or expected from the peer,
7448 respectively. (SSL_get_peer_finished is usually the Finished message
7449 actually received from the peer, otherwise the protocol will be aborted.)
7451 As the Finished message are message digests of the complete handshake
7452 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
7453 be used for external authentication procedures when the authentication
7454 provided by SSL/TLS is not desired or is not enough.
7457 *) Enhanced support for Alpha Linux is added. Now ./config checks if
7458 the host supports BWX extension and if Compaq C is present on the
7459 $PATH. Just exploiting of the BWX extension results in 20-30%
7460 performance kick for some algorithms, e.g. DES and RC4 to mention
7461 a couple. Compaq C in turn generates ~20% faster code for MD5 and
7465 *) Add support for MS "fast SGC". This is arguably a violation of the
7466 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
7467 weak crypto and after checking the certificate is SGC a second one
7468 with strong crypto. MS SGC stops the first handshake after receiving
7469 the server certificate message and sends a second client hello. Since
7470 a server will typically do all the time consuming operations before
7471 expecting any further messages from the client (server key exchange
7472 is the most expensive) there is little difference between the two.
7474 To get OpenSSL to support MS SGC we have to permit a second client
7475 hello message after we have sent server done. In addition we have to
7476 reset the MAC if we do get this second client hello.
7479 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
7480 if a DER encoded private key is RSA or DSA traditional format. Changed
7481 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
7482 format DER encoded private key. Newer code should use PKCS#8 format which
7483 has the key type encoded in the ASN1 structure. Added DER private key
7484 support to pkcs8 application.
7487 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
7488 ciphersuites has been selected (as required by the SSL 3/TLS 1
7489 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
7490 is set, we interpret this as a request to violate the specification
7491 (the worst that can happen is a handshake failure, and 'correct'
7492 behaviour would result in a handshake failure anyway).
7495 *) In SSL_CTX_add_session, take into account that there might be multiple
7496 SSL_SESSION structures with the same session ID (e.g. when two threads
7497 concurrently obtain them from an external cache).
7498 The internal cache can handle only one SSL_SESSION with a given ID,
7499 so if there's a conflict, we now throw out the old one to achieve
7503 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
7504 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
7505 some routines that use cipher OIDs: some ciphers do not have OIDs
7506 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
7510 *) Simplify the trust setting structure and code. Now we just have
7511 two sequences of OIDs for trusted and rejected settings. These will
7512 typically have values the same as the extended key usage extension
7513 and any application specific purposes.
7515 The trust checking code now has a default behaviour: it will just
7516 check for an object with the same NID as the passed id. Functions can
7517 be provided to override either the default behaviour or the behaviour
7518 for a given id. SSL client, server and email already have functions
7519 in place for compatibility: they check the NID and also return "trusted"
7520 if the certificate is self signed.
7523 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
7524 traditional format into an EVP_PKEY structure.
7527 *) Add a password callback function PEM_cb() which either prompts for
7528 a password if usr_data is NULL or otherwise assumes it is a null
7529 terminated password. Allow passwords to be passed on command line
7530 environment or config files in a few more utilities.
7533 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
7534 keys. Add some short names for PKCS#8 PBE algorithms and allow them
7535 to be specified on the command line for the pkcs8 and pkcs12 utilities.
7536 Update documentation.
7539 *) Support for ASN1 "NULL" type. This could be handled before by using
7540 ASN1_TYPE but there wasn't any function that would try to read a NULL
7541 and produce an error if it couldn't. For compatibility we also have
7542 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
7543 don't allocate anything because they don't need to.
7546 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
7548 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
7550 *) Rebuild of the memory allocation routines used by OpenSSL code and
7551 possibly others as well. The purpose is to make an interface that
7552 provide hooks so anyone can build a separate set of allocation and
7553 deallocation routines to be used by OpenSSL, for example memory
7554 pool implementations, or something else, which was previously hard
7555 since Malloc(), Realloc() and Free() were defined as macros having
7556 the values malloc, realloc and free, respectively (except for Win32
7557 compilations). The same is provided for memory debugging code.
7558 OpenSSL already comes with functionality to find memory leaks, but
7559 this gives people a chance to debug other memory problems.
7561 With these changes, a new set of functions and macros have appeared:
7563 CRYPTO_set_mem_debug_functions() [F]
7564 CRYPTO_get_mem_debug_functions() [F]
7565 CRYPTO_dbg_set_options() [F]
7566 CRYPTO_dbg_get_options() [F]
7567 CRYPTO_malloc_debug_init() [M]
7569 The memory debug functions are NULL by default, unless the library
7570 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
7571 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
7572 gives the standard debugging functions that come with OpenSSL) or
7573 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
7574 provided by the library user) must be used. When the standard
7575 debugging functions are used, CRYPTO_dbg_set_options can be used to
7576 request additional information:
7577 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
7578 the CRYPTO_MDEBUG_xxx macro when compiling the library.
7580 Also, things like CRYPTO_set_mem_functions will always give the
7581 expected result (the new set of functions is used for allocation
7582 and deallocation) at all times, regardless of platform and compiler
7585 To finish it up, some functions that were never use in any other
7586 way than through macros have a new API and new semantic:
7589 CRYPTO_dbg_realloc()
7592 All macros of value have retained their old syntax.
7593 [Richard Levitte and Bodo Moeller]
7595 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
7596 ordering of SMIMECapabilities wasn't in "strength order" and there
7597 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
7601 *) Some ASN1 types with illegal zero length encoding (INTEGER,
7602 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
7603 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
7605 *) Merge in my S/MIME library for OpenSSL. This provides a simple
7606 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
7607 functionality to handle multipart/signed properly) and a utility
7608 called 'smime' to call all this stuff. This is based on code I
7609 originally wrote for Celo who have kindly allowed it to be
7610 included in OpenSSL.
7613 *) Add variants des_set_key_checked and des_set_key_unchecked of
7614 des_set_key (aka des_key_sched). Global variable des_check_key
7615 decides which of these is called by des_set_key; this way
7616 des_check_key behaves as it always did, but applications and
7617 the library itself, which was buggy for des_check_key == 1,
7618 have a cleaner way to pick the version they need.
7621 *) New function PKCS12_newpass() which changes the password of a
7625 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
7626 dynamic mix. In both cases the ids can be used as an index into the
7627 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
7628 functions so they accept a list of the field values and the
7629 application doesn't need to directly manipulate the X509_TRUST
7633 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
7637 *) Modify the way the V3 extension code looks up extensions. This now
7638 works in a similar way to the object code: we have some "standard"
7639 extensions in a static table which is searched with OBJ_bsearch()
7640 and the application can add dynamic ones if needed. The file
7641 crypto/x509v3/ext_dat.h now has the info: this file needs to be
7642 updated whenever a new extension is added to the core code and kept
7643 in ext_nid order. There is a simple program 'tabtest.c' which checks
7644 this. New extensions are not added too often so this file can readily
7645 be maintained manually.
7647 There are two big advantages in doing things this way. The extensions
7648 can be looked up immediately and no longer need to be "added" using
7649 X509V3_add_standard_extensions(): this function now does nothing.
7650 [Side note: I get *lots* of email saying the extension code doesn't
7651 work because people forget to call this function]
7652 Also no dynamic allocation is done unless new extensions are added:
7653 so if we don't add custom extensions there is no need to call
7654 X509V3_EXT_cleanup().
7657 *) Modify enc utility's salting as follows: make salting the default. Add a
7658 magic header, so unsalted files fail gracefully instead of just decrypting
7659 to garbage. This is because not salting is a big security hole, so people
7660 should be discouraged from doing it.
7663 *) Fixes and enhancements to the 'x509' utility. It allowed a message
7664 digest to be passed on the command line but it only used this
7665 parameter when signing a certificate. Modified so all relevant
7666 operations are affected by the digest parameter including the
7667 -fingerprint and -x509toreq options. Also -x509toreq choked if a
7668 DSA key was used because it didn't fix the digest.
7671 *) Initial certificate chain verify code. Currently tests the untrusted
7672 certificates for consistency with the verify purpose (which is set
7673 when the X509_STORE_CTX structure is set up) and checks the pathlength.
7675 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
7676 this is because it will reject chains with invalid extensions whereas
7677 every previous version of OpenSSL and SSLeay made no checks at all.
7679 Trust code: checks the root CA for the relevant trust settings. Trust
7680 settings have an initial value consistent with the verify purpose: e.g.
7681 if the verify purpose is for SSL client use it expects the CA to be
7682 trusted for SSL client use. However the default value can be changed to
7683 permit custom trust settings: one example of this would be to only trust
7684 certificates from a specific "secure" set of CAs.
7686 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
7687 which should be used for version portability: especially since the
7688 verify structure is likely to change more often now.
7690 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
7691 to set them. If not set then assume SSL clients will verify SSL servers
7694 Two new options to the verify program: -untrusted allows a set of
7695 untrusted certificates to be passed in and -purpose which sets the
7696 intended purpose of the certificate. If a purpose is set then the
7697 new chain verify code is used to check extension consistency.
7700 *) Support for the authority information access extension.
7703 *) Modify RSA and DSA PEM read routines to transparently handle
7704 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
7705 public keys in a format compatible with certificate
7706 SubjectPublicKeyInfo structures. Unfortunately there were already
7707 functions called *_PublicKey_* which used various odd formats so
7708 these are retained for compatibility: however the DSA variants were
7709 never in a public release so they have been deleted. Changed dsa/rsa
7710 utilities to handle the new format: note no releases ever handled public
7711 keys so we should be OK.
7713 The primary motivation for this change is to avoid the same fiasco
7714 that dogs private keys: there are several incompatible private key
7715 formats some of which are standard and some OpenSSL specific and
7716 require various evil hacks to allow partial transparent handling and
7717 even then it doesn't work with DER formats. Given the option anything
7718 other than PKCS#8 should be dumped: but the other formats have to
7719 stay in the name of compatibility.
7721 With public keys and the benefit of hindsight one standard format
7722 is used which works with EVP_PKEY, RSA or DSA structures: though
7723 it clearly returns an error if you try to read the wrong kind of key.
7725 Added a -pubkey option to the 'x509' utility to output the public key.
7726 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
7727 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
7728 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
7729 that do the same as the EVP_PKEY_assign_*() except they up the
7730 reference count of the added key (they don't "swallow" the
7734 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
7735 CRLs would fail if the file contained no certificates or no CRLs:
7736 added a new function to read in both types and return the number
7737 read: this means that if none are read it will be an error. The
7738 DER versions of the certificate and CRL reader would always fail
7739 because it isn't possible to mix certificates and CRLs in DER format
7740 without choking one or the other routine. Changed this to just read
7741 a certificate: this is the best we can do. Also modified the code
7742 in apps/verify.c to take notice of return codes: it was previously
7743 attempting to read in certificates from NULL pointers and ignoring
7744 any errors: this is one reason why the cert and CRL reader seemed
7745 to work. It doesn't check return codes from the default certificate
7746 routines: these may well fail if the certificates aren't installed.
7749 *) Code to support otherName option in GeneralName.
7752 *) First update to verify code. Change the verify utility
7753 so it warns if it is passed a self signed certificate:
7754 for consistency with the normal behaviour. X509_verify
7755 has been modified to it will now verify a self signed
7756 certificate if *exactly* the same certificate appears
7757 in the store: it was previously impossible to trust a
7758 single self signed certificate. This means that:
7759 openssl verify ss.pem
7760 now gives a warning about a self signed certificate but
7761 openssl verify -CAfile ss.pem ss.pem
7765 *) For servers, store verify_result in SSL_SESSION data structure
7766 (and add it to external session representation).
7767 This is needed when client certificate verifications fails,
7768 but an application-provided verification callback (set by
7769 SSL_CTX_set_cert_verify_callback) allows accepting the session
7770 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
7771 but returns 1): When the session is reused, we have to set
7772 ssl->verify_result to the appropriate error code to avoid
7774 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
7776 *) Fix a bug in the new PKCS#7 code: it didn't consider the
7777 case in PKCS7_dataInit() where the signed PKCS7 structure
7778 didn't contain any existing data because it was being created.
7779 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
7781 *) Add a salt to the key derivation routines in enc.c. This
7782 forms the first 8 bytes of the encrypted file. Also add a
7783 -S option to allow a salt to be input on the command line.
7786 *) New function X509_cmp(). Oddly enough there wasn't a function
7787 to compare two certificates. We do this by working out the SHA1
7788 hash and comparing that. X509_cmp() will be needed by the trust
7792 *) SSL_get1_session() is like SSL_get_session(), but increments
7793 the reference count in the SSL_SESSION returned.
7794 [Geoff Thorpe <geoff@eu.c2.net>]
7796 *) Fix for 'req': it was adding a null to request attributes.
7797 Also change the X509_LOOKUP and X509_INFO code to handle
7798 certificate auxiliary information.
7801 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
7805 *) Add the possibility to add extra information to the memory leak
7806 detecting output, to form tracebacks, showing from where each
7807 allocation was originated: CRYPTO_push_info("constant string") adds
7808 the string plus current file name and line number to a per-thread
7809 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
7810 is like calling CYRPTO_pop_info() until the stack is empty.
7811 Also updated memory leak detection code to be multi-thread-safe.
7814 *) Add options -text and -noout to pkcs7 utility and delete the
7815 encryption options which never did anything. Update docs.
7818 *) Add options to some of the utilities to allow the pass phrase
7819 to be included on either the command line (not recommended on
7820 OSes like Unix) or read from the environment. Update the
7821 manpages and fix a few bugs.
7824 *) Add a few manpages for some of the openssl commands.
7827 *) Fix the -revoke option in ca. It was freeing up memory twice,
7828 leaking and not finding already revoked certificates.
7831 *) Extensive changes to support certificate auxiliary information.
7832 This involves the use of X509_CERT_AUX structure and X509_AUX
7833 functions. An X509_AUX function such as PEM_read_X509_AUX()
7834 can still read in a certificate file in the usual way but it
7835 will also read in any additional "auxiliary information". By
7836 doing things this way a fair degree of compatibility can be
7837 retained: existing certificates can have this information added
7838 using the new 'x509' options.
7840 Current auxiliary information includes an "alias" and some trust
7841 settings. The trust settings will ultimately be used in enhanced
7842 certificate chain verification routines: currently a certificate
7843 can only be trusted if it is self signed and then it is trusted
7847 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
7848 The problem was that one of the replacement routines had not been working
7849 since SSLeay releases. For now the offending routine has been replaced
7850 with non-optimised assembler. Even so, this now gives around 95%
7851 performance improvement for 1024 bit RSA signs.
7854 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
7855 handling. Most clients have the effective key size in bits equal to
7856 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
7857 A few however don't do this and instead use the size of the decrypted key
7858 to determine the RC2 key length and the AlgorithmIdentifier to determine
7859 the effective key length. In this case the effective key length can still
7860 be 40 bits but the key length can be 168 bits for example. This is fixed
7861 by manually forcing an RC2 key into the EVP_PKEY structure because the
7862 EVP code can't currently handle unusual RC2 key sizes: it always assumes
7863 the key length and effective key length are equal.
7866 *) Add a bunch of functions that should simplify the creation of
7867 X509_NAME structures. Now you should be able to do:
7868 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
7869 and have it automatically work out the correct field type and fill in
7870 the structures. The more adventurous can try:
7871 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
7872 and it will (hopefully) work out the correct multibyte encoding.
7875 *) Change the 'req' utility to use the new field handling and multibyte
7876 copy routines. Before the DN field creation was handled in an ad hoc
7877 way in req, ca, and x509 which was rather broken and didn't support
7878 BMPStrings or UTF8Strings. Since some software doesn't implement
7879 BMPStrings or UTF8Strings yet, they can be enabled using the config file
7880 using the dirstring_type option. See the new comment in the default
7881 openssl.cnf for more info.
7884 *) Make crypto/rand/md_rand.c more robust:
7885 - Assure unique random numbers after fork().
7886 - Make sure that concurrent threads access the global counter and
7887 md serializably so that we never lose entropy in them
7888 or use exactly the same state in multiple threads.
7889 Access to the large state is not always serializable because
7890 the additional locking could be a performance killer, and
7891 md should be large enough anyway.
7894 *) New file apps/app_rand.c with commonly needed functionality
7895 for handling the random seed file.
7897 Use the random seed file in some applications that previously did not:
7899 dsaparam -genkey (which also ignored its '-rand' option),
7902 x509 (when signing).
7903 Except on systems with /dev/urandom, it is crucial to have a random
7904 seed file at least for key creation, DSA signing, and for DH exchanges;
7905 for RSA signatures we could do without one.
7907 gendh and gendsa (unlike genrsa) used to read only the first byte
7908 of each file listed in the '-rand' option. The function as previously
7909 found in genrsa is now in app_rand.c and is used by all programs
7910 that support '-rand'.
7913 *) In RAND_write_file, use mode 0600 for creating files;
7914 don't just chmod when it may be too late.
7917 *) Report an error from X509_STORE_load_locations
7918 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
7921 *) New function ASN1_mbstring_copy() this copies a string in either
7922 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
7923 into an ASN1_STRING type. A mask of permissible types is passed
7924 and it chooses the "minimal" type to use or an error if not type
7928 *) Add function equivalents to the various macros in asn1.h. The old
7929 macros are retained with an M_ prefix. Code inside the library can
7930 use the M_ macros. External code (including the openssl utility)
7931 should *NOT* in order to be "shared library friendly".
7934 *) Add various functions that can check a certificate's extensions
7935 to see if it usable for various purposes such as SSL client,
7936 server or S/MIME and CAs of these types. This is currently
7937 VERY EXPERIMENTAL but will ultimately be used for certificate chain
7938 verification. Also added a -purpose flag to x509 utility to
7939 print out all the purposes.
7942 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
7946 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
7947 for, obtain and decode and extension and obtain its critical flag.
7948 This allows all the necessary extension code to be handled in a
7949 single function call.
7952 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
7953 platforms. See crypto/rc4/rc4_enc.c for further details.
7956 *) New -noout option to asn1parse. This causes no output to be produced
7957 its main use is when combined with -strparse and -out to extract data
7958 from a file (which may not be in ASN.1 format).
7961 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
7962 when producing the local key id.
7963 [Richard Levitte <levitte@stacken.kth.se>]
7965 *) New option -dhparam in s_server. This allows a DH parameter file to be
7966 stated explicitly. If it is not stated then it tries the first server
7967 certificate file. The previous behaviour hard coded the filename
7971 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
7972 a public key to be input or output. For example:
7973 openssl rsa -in key.pem -pubout -out pubkey.pem
7974 Also added necessary DSA public key functions to handle this.
7977 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
7978 in the message. This was handled by allowing
7979 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
7980 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
7982 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
7983 to the end of the strings whereas this didn't. This would cause problems
7984 if strings read with d2i_ASN1_bytes() were later modified.
7985 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
7987 *) Fix for base64 decode bug. When a base64 bio reads only one line of
7988 data and it contains EOF it will end up returning an error. This is
7989 caused by input 46 bytes long. The cause is due to the way base64
7990 BIOs find the start of base64 encoded data. They do this by trying a
7991 trial decode on each line until they find one that works. When they
7992 do a flag is set and it starts again knowing it can pass all the
7993 data directly through the decoder. Unfortunately it doesn't reset
7994 the context it uses. This means that if EOF is reached an attempt
7995 is made to pass two EOFs through the context and this causes the
7996 resulting error. This can also cause other problems as well. As is
7997 usual with these problems it takes *ages* to find and the fix is
7998 trivial: move one line.
7999 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
8001 *) Ugly workaround to get s_client and s_server working under Windows. The
8002 old code wouldn't work because it needed to select() on sockets and the
8003 tty (for keypresses and to see if data could be written). Win32 only
8004 supports select() on sockets so we select() with a 1s timeout on the
8005 sockets and then see if any characters are waiting to be read, if none
8006 are present then we retry, we also assume we can always write data to
8007 the tty. This isn't nice because the code then blocks until we've
8008 received a complete line of data and it is effectively polling the
8009 keyboard at 1s intervals: however it's quite a bit better than not
8010 working at all :-) A dedicated Windows application might handle this
8011 with an event loop for example.
8014 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
8015 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
8016 will be called when RSA_sign() and RSA_verify() are used. This is useful
8017 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
8018 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
8019 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
8020 This necessitated the support of an extra signature type NID_md5_sha1
8021 for SSL signatures and modifications to the SSL library to use it instead
8022 of calling RSA_public_decrypt() and RSA_private_encrypt().
8025 *) Add new -verify -CAfile and -CApath options to the crl program, these
8026 will lookup a CRL issuers certificate and verify the signature in a
8027 similar way to the verify program. Tidy up the crl program so it
8028 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
8029 less strict. It will now permit CRL extensions even if it is not
8030 a V2 CRL: this will allow it to tolerate some broken CRLs.
8033 *) Initialize all non-automatic variables each time one of the openssl
8034 sub-programs is started (this is necessary as they may be started
8035 multiple times from the "OpenSSL>" prompt).
8036 [Lennart Bang, Bodo Moeller]
8038 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
8039 removing all other RSA functionality (this is what NO_RSA does). This
8040 is so (for example) those in the US can disable those operations covered
8041 by the RSA patent while allowing storage and parsing of RSA keys and RSA
8045 *) Non-copying interface to BIO pairs.
8046 (still largely untested)
8049 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
8050 ASCII string. This was handled independently in various places before.
8053 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
8054 UTF8 strings a character at a time.
8057 *) Use client_version from client hello to select the protocol
8058 (s23_srvr.c) and for RSA client key exchange verification
8059 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
8062 *) Add various utility functions to handle SPKACs, these were previously
8063 handled by poking round in the structure internals. Added new function
8064 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
8065 print, verify and generate SPKACs. Based on an original idea from
8066 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
8069 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
8072 *) Allow the config file extension section to be overwritten on the
8073 command line. Based on an original idea from Massimiliano Pala
8074 <madwolf@comune.modena.it>. The new option is called -extensions
8075 and can be applied to ca, req and x509. Also -reqexts to override
8076 the request extensions in req and -crlexts to override the crl extensions
8080 *) Add new feature to the SPKAC handling in ca. Now you can include
8081 the same field multiple times by preceding it by "XXXX." for example:
8084 this is the same syntax as used in the req config file.
8087 *) Allow certificate extensions to be added to certificate requests. These
8088 are specified in a 'req_extensions' option of the req section of the
8089 config file. They can be printed out with the -text option to req but
8090 are otherwise ignored at present.
8093 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
8094 data read consists of only the final block it would not decrypted because
8095 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
8096 A misplaced 'break' also meant the decrypted final block might not be
8097 copied until the next read.
8100 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
8101 a few extra parameters to the DH structure: these will be useful if
8102 for example we want the value of 'q' or implement X9.42 DH.
8105 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
8106 provides hooks that allow the default DSA functions or functions on a
8107 "per key" basis to be replaced. This allows hardware acceleration and
8108 hardware key storage to be handled without major modification to the
8109 library. Also added low level modexp hooks and CRYPTO_EX structure and
8110 associated functions.
8113 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
8114 as "read only": it can't be written to and the buffer it points to will
8115 not be freed. Reading from a read only BIO is much more efficient than
8116 a normal memory BIO. This was added because there are several times when
8117 an area of memory needs to be read from a BIO. The previous method was
8118 to create a memory BIO and write the data to it, this results in two
8119 copies of the data and an O(n^2) reading algorithm. There is a new
8120 function BIO_new_mem_buf() which creates a read only memory BIO from
8121 an area of memory. Also modified the PKCS#7 routines to use read only
8125 *) Bugfix: ssl23_get_client_hello did not work properly when called in
8126 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
8127 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
8128 but a retry condition occured while trying to read the rest.
8131 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
8132 NID_pkcs7_encrypted by default: this was wrong since this should almost
8133 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
8134 the encrypted data type: this is a more sensible place to put it and it
8135 allows the PKCS#12 code to be tidied up that duplicated this
8139 *) Changed obj_dat.pl script so it takes its input and output files on
8140 the command line. This should avoid shell escape redirection problems
8144 *) Initial support for certificate extension requests, these are included
8145 in things like Xenroll certificate requests. Included functions to allow
8146 extensions to be obtained and added.
8149 *) -crlf option to s_client and s_server for sending newlines as
8150 CRLF (as required by many protocols).
8153 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
8155 *) Install libRSAglue.a when OpenSSL is built with RSAref.
8156 [Ralf S. Engelschall]
8158 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
8159 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
8161 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
8165 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
8166 DH parameters/keys (q is lost during that conversion, but the resulting
8167 DH parameters contain its length).
8169 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
8170 much faster than DH_generate_parameters (which creates parameters
8171 where p = 2*q + 1), and also the smaller q makes DH computations
8172 much more efficient (160-bit exponentiation instead of 1024-bit
8173 exponentiation); so this provides a convenient way to support DHE
8174 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
8175 utter importance to use
8176 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8178 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
8179 when such DH parameters are used, because otherwise small subgroup
8180 attacks may become possible!
8183 *) Avoid memory leak in i2d_DHparams.
8186 *) Allow the -k option to be used more than once in the enc program:
8187 this allows the same encrypted message to be read by multiple recipients.
8190 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
8191 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
8192 it will always use the numerical form of the OID, even if it has a short
8196 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
8197 method only got called if p,q,dmp1,dmq1,iqmp components were present,
8198 otherwise bn_mod_exp was called. In the case of hardware keys for example
8199 no private key components need be present and it might store extra data
8200 in the RSA structure, which cannot be accessed from bn_mod_exp.
8201 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
8202 private key operations.
8205 *) Added support for SPARC Linux.
8208 *) pem_password_cb function type incompatibly changed from
8209 typedef int pem_password_cb(char *buf, int size, int rwflag);
8211 ....(char *buf, int size, int rwflag, void *userdata);
8212 so that applications can pass data to their callbacks:
8213 The PEM[_ASN1]_{read,write}... functions and macros now take an
8214 additional void * argument, which is just handed through whenever
8215 the password callback is called.
8216 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
8218 New function SSL_CTX_set_default_passwd_cb_userdata.
8220 Compatibility note: As many C implementations push function arguments
8221 onto the stack in reverse order, the new library version is likely to
8222 interoperate with programs that have been compiled with the old
8223 pem_password_cb definition (PEM_whatever takes some data that
8224 happens to be on the stack as its last argument, and the callback
8225 just ignores this garbage); but there is no guarantee whatsoever that
8228 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
8229 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
8230 problems not only on Windows, but also on some Unix platforms.
8231 To avoid problematic command lines, these definitions are now in an
8232 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
8233 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
8236 *) MIPS III/IV assembler module is reimplemented.
8239 *) More DES library cleanups: remove references to srand/rand and
8240 delete an unused file.
8243 *) Add support for the the free Netwide assembler (NASM) under Win32,
8244 since not many people have MASM (ml) and it can be hard to obtain.
8245 This is currently experimental but it seems to work OK and pass all
8246 the tests. Check out INSTALL.W32 for info.
8249 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
8250 without temporary keys kept an extra copy of the server key,
8251 and connections with temporary keys did not free everything in case
8255 *) New function RSA_check_key and new openssl rsa option -check
8256 for verifying the consistency of RSA keys.
8257 [Ulf Moeller, Bodo Moeller]
8259 *) Various changes to make Win32 compile work:
8260 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
8261 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
8262 comparison" warnings.
8263 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
8266 *) Add a debugging option to PKCS#5 v2 key generation function: when
8267 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
8268 derived keys are printed to stderr.
8271 *) Copy the flags in ASN1_STRING_dup().
8272 [Roman E. Pavlov <pre@mo.msk.ru>]
8274 *) The x509 application mishandled signing requests containing DSA
8275 keys when the signing key was also DSA and the parameters didn't match.
8277 It was supposed to omit the parameters when they matched the signing key:
8278 the verifying software was then supposed to automatically use the CA's
8279 parameters if they were absent from the end user certificate.
8281 Omitting parameters is no longer recommended. The test was also
8282 the wrong way round! This was probably due to unusual behaviour in
8283 EVP_cmp_parameters() which returns 1 if the parameters match.
8284 This meant that parameters were omitted when they *didn't* match and
8285 the certificate was useless. Certificates signed with 'ca' didn't have
8287 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
8289 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
8290 The interface is as follows:
8291 Applications can use
8292 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
8293 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
8294 "off" is now the default.
8295 The library internally uses
8296 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
8297 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
8298 to disable memory-checking temporarily.
8300 Some inconsistent states that previously were possible (and were
8301 even the default) are now avoided.
8303 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
8304 with each memory chunk allocated; this is occasionally more helpful
8305 than just having a counter.
8307 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
8309 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
8313 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
8314 which largely parallels "options", but is for changing API behaviour,
8315 whereas "options" are about protocol behaviour.
8316 Initial "mode" flags are:
8318 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
8319 a single record has been written.
8320 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
8321 retries use the same buffer location.
8322 (But all of the contents must be
8326 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
8329 *) Fix problems with no-hmac etc.
8330 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
8332 *) New functions RSA_get_default_method(), RSA_set_method() and
8333 RSA_get_method(). These allows replacement of RSA_METHODs without having
8334 to mess around with the internals of an RSA structure.
8337 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
8338 Also really enable memory leak checks in openssl.c and in some
8340 [Chad C. Mulligan, Bodo Moeller]
8342 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
8343 up the length of negative integers. This has now been simplified to just
8344 store the length when it is first determined and use it later, rather
8345 than trying to keep track of where data is copied and updating it to
8347 [Steve Henson, reported by Brien Wheeler
8348 <bwheeler@authentica-security.com>]
8350 *) Add a new function PKCS7_signatureVerify. This allows the verification
8351 of a PKCS#7 signature but with the signing certificate passed to the
8352 function itself. This contrasts with PKCS7_dataVerify which assumes the
8353 certificate is present in the PKCS#7 structure. This isn't always the
8354 case: certificates can be omitted from a PKCS#7 structure and be
8355 distributed by "out of band" means (such as a certificate database).
8358 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
8359 function prototypes in pem.h, also change util/mkdef.pl to add the
8360 necessary function names.
8363 *) mk1mf.pl (used by Windows builds) did not properly read the
8364 options set by Configure in the top level Makefile, and Configure
8365 was not even able to write more than one option correctly.
8366 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
8369 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
8370 file to be loaded from a BIO or FILE pointer. The BIO version will
8371 for example allow memory BIOs to contain config info.
8374 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
8375 Whoever hopes to achieve shared-library compatibility across versions
8376 must use this, not the compile-time macro.
8377 (Exercise 0.9.4: Which is the minimum library version required by
8379 Note: All this applies only to multi-threaded programs, others don't
8383 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
8384 through a BIO pair triggered the default case, i.e.
8385 SSLerr(...,SSL_R_UNKNOWN_STATE).
8388 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
8389 can use the SSL library even if none of the specific BIOs is
8393 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
8394 for the encoded length.
8395 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
8397 *) Add initial documentation of the X509V3 functions.
8400 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
8401 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
8402 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
8403 secure PKCS#8 private key format with a high iteration count.
8406 *) Fix determination of Perl interpreter: A perl or perl5
8407 _directory_ in $PATH was also accepted as the interpreter.
8408 [Ralf S. Engelschall]
8410 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
8411 wrong with it but it was very old and did things like calling
8412 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
8416 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
8417 to use the new extension code.
8420 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
8421 with macros. This should make it easier to change their form, add extra
8422 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
8426 *) Add to configuration table a new entry that can specify an alternative
8427 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
8428 according to Mark Crispin <MRC@Panda.COM>.
8432 *) DES CBC did not update the IV. Weird.
8435 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
8436 Changing the behaviour of the former might break existing programs --
8437 where IV updating is needed, des_ncbc_encrypt can be used.
8440 *) When bntest is run from "make test" it drives bc to check its
8441 calculations, as well as internally checking them. If an internal check
8442 fails, it needs to cause bc to give a non-zero result or make test carries
8443 on without noticing the failure. Fixed.
8446 *) DES library cleanups.
8449 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
8450 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
8451 ciphers. NOTE: although the key derivation function has been verified
8452 against some published test vectors it has not been extensively tested
8453 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
8457 *) Instead of "mkdir -p", which is not fully portable, use new
8458 Perl script "util/mkdir-p.pl".
8461 *) Rewrite the way password based encryption (PBE) is handled. It used to
8462 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
8463 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
8464 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
8465 the 'parameter' field of the AlgorithmIdentifier is passed to the
8466 underlying key generation function so it must do its own ASN1 parsing.
8467 This has also changed the EVP_PBE_CipherInit() function which now has a
8468 'parameter' argument instead of literal salt and iteration count values
8469 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
8472 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
8473 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
8474 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
8475 KEY" because this clashed with PKCS#8 unencrypted string. Since this
8476 value was just used as a "magic string" and not used directly its
8477 value doesn't matter.
8480 *) Introduce some semblance of const correctness to BN. Shame C doesn't
8484 *) "linux-sparc64" configuration (ultrapenguin).
8485 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
8486 "linux-sparc" configuration.
8487 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
8489 *) config now generates no-xxx options for missing ciphers.
8492 *) Support the EBCDIC character set (work in progress).
8493 File ebcdic.c not yet included because it has a different license.
8494 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8496 *) Support BS2000/OSD-POSIX.
8497 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8499 *) Make callbacks for key generation use void * instead of char *.
8502 *) Make S/MIME samples compile (not yet tested).
8505 *) Additional typesafe stacks.
8508 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
8512 Changes between 0.9.3 and 0.9.3a [29 May 1999]
8514 *) New configuration variant "sco5-gcc".
8516 *) Updated some demos.
8517 [Sean O Riordain, Wade Scholine]
8519 *) Add missing BIO_free at exit of pkcs12 application.
8522 *) Fix memory leak in conf.c.
8525 *) Updates for Win32 to assembler version of MD5.
8528 *) Set #! path to perl in apps/der_chop to where we found it
8529 instead of using a fixed path.
8532 *) SHA library changes for irix64-mips4-cc.
8535 *) Improvements for VMS support.
8539 Changes between 0.9.2b and 0.9.3 [24 May 1999]
8541 *) Bignum library bug fix. IRIX 6 passes "make test" now!
8542 This also avoids the problems with SC4.2 and unpatched SC5.
8543 [Andy Polyakov <appro@fy.chalmers.se>]
8545 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
8546 These are required because of the typesafe stack would otherwise break
8547 existing code. If old code used a structure member which used to be STACK
8548 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
8549 sk_num or sk_value it would produce an error because the num, data members
8550 are not present in STACK_OF. Now it just produces a warning. sk_set
8551 replaces the old method of assigning a value to sk_value
8552 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
8553 that does this will no longer work (and should use sk_set instead) but
8554 this could be regarded as a "questionable" behaviour anyway.
8557 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
8558 correctly handle encrypted S/MIME data.
8561 *) Change type of various DES function arguments from des_cblock
8562 (which means, in function argument declarations, pointer to char)
8563 to des_cblock * (meaning pointer to array with 8 char elements),
8564 which allows the compiler to do more typechecking; it was like
8565 that back in SSLeay, but with lots of ugly casts.
8567 Introduce new type const_des_cblock.
8570 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
8571 problems: find RecipientInfo structure that matches recipient certificate
8572 and initialise the ASN1 structures properly based on passed cipher.
8575 *) Belatedly make the BN tests actually check the results.
8578 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
8579 to and from BNs: it was completely broken. New compilation option
8580 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
8581 key elements as negative integers.
8584 *) Reorganize and speed up MD5.
8585 [Andy Polyakov <appro@fy.chalmers.se>]
8588 [Richard Levitte <richard@levitte.org>]
8590 *) New option -out to asn1parse to allow the parsed structure to be
8591 output to a file. This is most useful when combined with the -strparse
8592 option to examine the output of things like OCTET STRINGS.
8595 *) Make SSL library a little more fool-proof by not requiring any longer
8596 that SSL_set_{accept,connect}_state be called before
8597 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
8598 in many applications because usually everything *appeared* to work as
8599 intended anyway -- now it really works as intended).
8602 *) Move openssl.cnf out of lib/.
8605 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
8606 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
8607 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
8608 [Ralf S. Engelschall]
8610 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
8611 handle PKCS#7 enveloped data properly.
8612 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
8614 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
8615 copying pointers. The cert_st handling is changed by this in
8616 various ways (and thus what used to be known as ctx->default_cert
8617 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
8618 any longer when s->cert does not give us what we need).
8619 ssl_cert_instantiate becomes obsolete by this change.
8620 As soon as we've got the new code right (possibly it already is?),
8621 we have solved a couple of bugs of the earlier code where s->cert
8622 was used as if it could not have been shared with other SSL structures.
8624 Note that using the SSL API in certain dirty ways now will result
8625 in different behaviour than observed with earlier library versions:
8626 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
8627 does not influence s as it used to.
8629 In order to clean up things more thoroughly, inside SSL_SESSION
8630 we don't use CERT any longer, but a new structure SESS_CERT
8631 that holds per-session data (if available); currently, this is
8632 the peer's certificate chain and, for clients, the server's certificate
8633 and temporary key. CERT holds only those values that can have
8634 meaningful defaults in an SSL_CTX.
8637 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
8638 from the internal representation. Various PKCS#7 fixes: remove some
8639 evil casts and set the enc_dig_alg field properly based on the signing
8643 *) Allow PKCS#12 password to be set from the command line or the
8644 environment. Let 'ca' get its config file name from the environment
8645 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
8649 *) Allow certificate policies extension to use an IA5STRING for the
8650 organization field. This is contrary to the PKIX definition but
8651 VeriSign uses it and IE5 only recognises this form. Document 'x509'
8655 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
8656 without disallowing inline assembler and the like for non-pedantic builds.
8659 *) Support Borland C++ builder.
8660 [Janez Jere <jj@void.si>, modified by Ulf Möller]
8665 *) SHA-1 cleanups and performance enhancements.
8666 [Andy Polyakov <appro@fy.chalmers.se>]
8668 *) Sparc v8plus assembler for the bignum library.
8669 [Andy Polyakov <appro@fy.chalmers.se>]
8671 *) Accept any -xxx and +xxx compiler options in Configure.
8674 *) Update HPUX configuration.
8677 *) Add missing sk_<type>_unshift() function to safestack.h
8678 [Ralf S. Engelschall]
8680 *) New function SSL_CTX_use_certificate_chain_file that sets the
8681 "extra_cert"s in addition to the certificate. (This makes sense
8682 only for "PEM" format files, as chains as a whole are not
8686 *) Support verify_depth from the SSL API.
8687 x509_vfy.c had what can be considered an off-by-one-error:
8688 Its depth (which was not part of the external interface)
8689 was actually counting the number of certificates in a chain;
8690 now it really counts the depth.
8693 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
8694 instead of X509err, which often resulted in confusing error
8695 messages since the error codes are not globally unique
8696 (e.g. an alleged error in ssl3_accept when a certificate
8697 didn't match the private key).
8699 *) New function SSL_CTX_set_session_id_context that allows to set a default
8700 value (so that you don't need SSL_set_session_id_context for each
8701 connection using the SSL_CTX).
8704 *) OAEP decoding bug fix.
8707 *) Support INSTALL_PREFIX for package builders, as proposed by
8711 *) New Configure options "threads" and "no-threads". For systems
8712 where the proper compiler options are known (currently Solaris
8713 and Linux), "threads" is the default.
8716 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
8719 *) Install various scripts to $(OPENSSLDIR)/misc, not to
8720 $(INSTALLTOP)/bin -- they shouldn't clutter directories
8721 such as /usr/local/bin.
8724 *) "make linux-shared" to build shared libraries.
8725 [Niels Poppe <niels@netbox.org>]
8727 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
8730 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
8731 extension adding in x509 utility.
8734 *) Remove NOPROTO sections and error code comments.
8737 *) Partial rewrite of the DEF file generator to now parse the ANSI
8741 *) New Configure options --prefix=DIR and --openssldir=DIR.
8744 *) Complete rewrite of the error code script(s). It is all now handled
8745 by one script at the top level which handles error code gathering,
8746 header rewriting and C source file generation. It should be much better
8747 than the old method: it now uses a modified version of Ulf's parser to
8748 read the ANSI prototypes in all header files (thus the old K&R definitions
8749 aren't needed for error creation any more) and do a better job of
8750 translating function codes into names. The old 'ASN1 error code imbedded
8751 in a comment' is no longer necessary and it doesn't use .err files which
8752 have now been deleted. Also the error code call doesn't have to appear all
8753 on one line (which resulted in some large lines...).
8756 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
8759 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
8760 0 (which usually indicates a closed connection), but continue reading.
8763 *) Fix some race conditions.
8766 *) Add support for CRL distribution points extension. Add Certificate
8767 Policies and CRL distribution points documentation.
8770 *) Move the autogenerated header file parts to crypto/opensslconf.h.
8773 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
8774 8 of keying material. Merlin has also confirmed interop with this fix
8775 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
8776 [Merlin Hughes <merlin@baltimore.ie>]
8778 *) Fix lots of warnings.
8779 [Richard Levitte <levitte@stacken.kth.se>]
8781 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
8782 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
8783 [Richard Levitte <levitte@stacken.kth.se>]
8785 *) Fix problems with sizeof(long) == 8.
8786 [Andy Polyakov <appro@fy.chalmers.se>]
8788 *) Change functions to ANSI C.
8791 *) Fix typos in error codes.
8792 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
8794 *) Remove defunct assembler files from Configure.
8797 *) SPARC v8 assembler BIGNUM implementation.
8798 [Andy Polyakov <appro@fy.chalmers.se>]
8800 *) Support for Certificate Policies extension: both print and set.
8801 Various additions to support the r2i method this uses.
8804 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
8805 return a const string when you are expecting an allocated buffer.
8808 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
8809 types DirectoryString and DisplayText.
8812 *) Add code to allow r2i extensions to access the configuration database,
8813 add an LHASH database driver and add several ctx helper functions.
8816 *) Fix an evil bug in bn_expand2() which caused various BN functions to
8817 fail when they extended the size of a BIGNUM.
8820 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
8821 support typesafe stack.
8824 *) Fix typo in SSL_[gs]et_options().
8825 [Nils Frostberg <nils@medcom.se>]
8827 *) Delete various functions and files that belonged to the (now obsolete)
8828 old X509V3 handling code.
8831 *) New Configure option "rsaref".
8834 *) Don't auto-generate pem.h.
8837 *) Introduce type-safe ASN.1 SETs.
8840 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
8841 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
8843 *) Introduce type-safe STACKs. This will almost certainly break lots of code
8844 that links with OpenSSL (well at least cause lots of warnings), but fear
8845 not: the conversion is trivial, and it eliminates loads of evil casts. A
8846 few STACKed things have been converted already. Feel free to convert more.
8847 In the fullness of time, I'll do away with the STACK type altogether.
8850 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
8851 specified in <certfile> by updating the entry in the index.txt file.
8852 This way one no longer has to edit the index.txt file manually for
8853 revoking a certificate. The -revoke option does the gory details now.
8854 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
8856 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
8857 `-text' option at all and this way the `-noout -text' combination was
8858 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
8859 [Ralf S. Engelschall]
8861 *) Make sure a corresponding plain text error message exists for the
8862 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
8863 verify callback function determined that a certificate was revoked.
8864 [Ralf S. Engelschall]
8866 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
8867 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
8868 all available cipers including rc5, which was forgotten until now.
8869 In order to let the testing shell script know which algorithms
8870 are available, a new (up to now undocumented) command
8871 "openssl list-cipher-commands" is used.
8874 *) Bugfix: s_client occasionally would sleep in select() when
8875 it should have checked SSL_pending() first.
8878 *) New functions DSA_do_sign and DSA_do_verify to provide access to
8879 the raw DSA values prior to ASN.1 encoding.
8882 *) Tweaks to Configure
8883 [Niels Poppe <niels@netbox.org>]
8885 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
8889 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
8892 *) New config option to avoid instructions that are illegal on the 80386.
8893 The default code is faster, but requires at least a 486.
8896 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
8897 SSL2_SERVER_VERSION (not used at all) macros, which are now the
8898 same as SSL2_VERSION anyway.
8901 *) New "-showcerts" option for s_client.
8904 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
8905 application. Various cleanups and fixes.
8908 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
8909 modify error routines to work internally. Add error codes and PBE init
8910 to library startup routines.
8913 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
8914 packing functions to asn1 and evp. Changed function names and error
8915 codes along the way.
8918 *) PKCS12 integration: and so it begins... First of several patches to
8919 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
8920 objects to objects.h
8923 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
8924 and display support for Thawte strong extranet extension.
8927 *) Add LinuxPPC support.
8928 [Jeff Dubrule <igor@pobox.org>]
8930 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
8931 bn_div_words in alpha.s.
8932 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
8934 *) Make sure the RSA OAEP test is skipped under -DRSAref because
8935 OAEP isn't supported when OpenSSL is built with RSAref.
8936 [Ulf Moeller <ulf@fitug.de>]
8938 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
8939 so they no longer are missing under -DNOPROTO.
8940 [Soren S. Jorvang <soren@t.dk>]
8943 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
8945 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
8946 doesn't work when the session is reused. Coming soon!
8949 *) Fix a security hole, that allows sessions to be reused in the wrong
8950 context thus bypassing client cert protection! All software that uses
8951 client certs and session caches in multiple contexts NEEDS PATCHING to
8952 allow session reuse! A fuller solution is in the works.
8953 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
8955 *) Some more source tree cleanups (removed obsolete files
8956 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
8957 permission on "config" script to be executable) and a fix for the INSTALL
8959 [Ulf Moeller <ulf@fitug.de>]
8961 *) Remove some legacy and erroneous uses of malloc, free instead of
8963 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
8965 *) Make rsa_oaep_test return non-zero on error.
8966 [Ulf Moeller <ulf@fitug.de>]
8968 *) Add support for native Solaris shared libraries. Configure
8969 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
8970 if someone would make that last step automatic.
8971 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
8973 *) ctx_size was not built with the right compiler during "make links". Fixed.
8976 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
8977 except NULL ciphers". This means the default cipher list will no longer
8978 enable NULL ciphers. They need to be specifically enabled e.g. with
8979 the string "DEFAULT:eNULL".
8982 *) Fix to RSA private encryption routines: if p < q then it would
8983 occasionally produce an invalid result. This will only happen with
8984 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
8987 *) Be less restrictive and allow also `perl util/perlpath.pl
8988 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
8989 because this way one can also use an interpreter named `perl5' (which is
8990 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
8991 installed as `perl').
8992 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
8994 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
8995 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
8997 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
8998 advapi32.lib to Win32 build and change the pem test comparision
8999 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
9000 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
9001 and crypto/des/ede_cbcm_enc.c.
9004 *) DES quad checksum was broken on big-endian architectures. Fixed.
9007 *) Comment out two functions in bio.h that aren't implemented. Fix up the
9008 Win32 test batch file so it (might) work again. The Win32 test batch file
9009 is horrible: I feel ill....
9012 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
9013 in e_os.h. Audit of header files to check ANSI and non ANSI
9014 sections: 10 functions were absent from non ANSI section and not exported
9015 from Windows DLLs. Fixed up libeay.num for new functions.
9018 *) Make `openssl version' output lines consistent.
9019 [Ralf S. Engelschall]
9021 *) Fix Win32 symbol export lists for BIO functions: Added
9022 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
9023 to ms/libeay{16,32}.def.
9024 [Ralf S. Engelschall]
9026 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
9027 fine under Unix and passes some trivial tests I've now added. But the
9028 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
9029 added to make sure no one expects that this stuff really works in the
9030 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
9031 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
9033 [Ralf S. Engelschall]
9035 *) Fix the generation of two part addresses in perl.
9036 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
9038 *) Add config entry for Linux on MIPS.
9039 [John Tobey <jtobey@channel1.com>]
9041 *) Make links whenever Configure is run, unless we are on Windoze.
9044 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
9045 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
9049 *) Add a useful kludge to allow package maintainers to specify compiler and
9050 other platforms details on the command line without having to patch the
9051 Configure script everytime: One now can use ``perl Configure
9052 <id>:<details>'', i.e. platform ids are allowed to have details appended
9053 to them (seperated by colons). This is treated as there would be a static
9054 pre-configured entry in Configure's %table under key <id> with value
9055 <details> and ``perl Configure <id>'' is called. So, when you want to
9056 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
9057 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
9058 now, which overrides the FreeBSD-elf entry on-the-fly.
9059 [Ralf S. Engelschall]
9061 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
9064 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
9065 on the `perl Configure ...' command line. This way one can compile
9066 OpenSSL libraries with Position Independent Code (PIC) which is needed
9067 for linking it into DSOs.
9068 [Ralf S. Engelschall]
9070 *) Remarkably, export ciphers were totally broken and no-one had noticed!
9074 *) Cleaned up the LICENSE document: The official contact for any license
9075 questions now is the OpenSSL core team under openssl-core@openssl.org.
9076 And add a paragraph about the dual-license situation to make sure people
9077 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
9078 to the OpenSSL toolkit.
9079 [Ralf S. Engelschall]
9081 *) General source tree makefile cleanups: Made `making xxx in yyy...'
9082 display consistent in the source tree and replaced `/bin/rm' by `rm'.
9083 Additonally cleaned up the `make links' target: Remove unnecessary
9084 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
9085 to speed processing and no longer clutter the display with confusing
9086 stuff. Instead only the actually done links are displayed.
9087 [Ralf S. Engelschall]
9089 *) Permit null encryption ciphersuites, used for authentication only. It used
9090 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
9091 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
9095 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
9096 signed attributes when verifying signatures (this would break them),
9097 the detached data encoding was wrong and public keys obtained using
9098 X509_get_pubkey() weren't freed.
9101 *) Add text documentation for the BUFFER functions. Also added a work around
9102 to a Win95 console bug. This was triggered by the password read stuff: the
9103 last character typed gets carried over to the next fread(). If you were
9104 generating a new cert request using 'req' for example then the last
9105 character of the passphrase would be CR which would then enter the first
9109 *) Added the new `Includes OpenSSL Cryptography Software' button as
9110 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
9111 button and can be used by applications based on OpenSSL to show the
9112 relationship to the OpenSSL project.
9113 [Ralf S. Engelschall]
9115 *) Remove confusing variables in function signatures in files
9116 ssl/ssl_lib.c and ssl/ssl.h.
9117 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9119 *) Don't install bss_file.c under PREFIX/include/
9120 [Lennart Bong <lob@kulthea.stacken.kth.se>]
9122 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
9123 functions that return function pointers and has support for NT specific
9124 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
9125 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
9126 unsigned to signed types: this was killing the Win32 compile.
9129 *) Add new certificate file to stack functions,
9130 SSL_add_dir_cert_subjects_to_stack() and
9131 SSL_add_file_cert_subjects_to_stack(). These largely supplant
9132 SSL_load_client_CA_file(), and can be used to add multiple certs easily
9133 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
9134 This means that Apache-SSL and similar packages don't have to mess around
9135 to add as many CAs as they want to the preferred list.
9138 *) Experiment with doxygen documentation. Currently only partially applied to
9140 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
9141 openssl.doxy as the configuration file.
9144 *) Get rid of remaining C++-style comments which strict C compilers hate.
9145 [Ralf S. Engelschall, pointed out by Carlos Amengual]
9147 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
9148 compiled in by default: it has problems with large keys.
9151 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
9152 DH private keys and/or callback functions which directly correspond to
9153 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
9154 is needed for applications which have to configure certificates on a
9155 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
9157 For the RSA certificate situation is makes no difference, but
9158 for the DSA certificate situation this fixes the "no shared cipher"
9159 problem where the OpenSSL cipher selection procedure failed because the
9160 temporary keys were not overtaken from the context and the API provided
9161 no way to reconfigure them.
9162 The new functions now let applications reconfigure the stuff and they
9163 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
9164 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
9165 non-public-API function ssl_cert_instantiate() is used as a helper
9166 function and also to reduce code redundancy inside ssl_rsa.c.
9167 [Ralf S. Engelschall]
9169 *) Move s_server -dcert and -dkey options out of the undocumented feature
9170 area because they are useful for the DSA situation and should be
9171 recognized by the users.
9172 [Ralf S. Engelschall]
9174 *) Fix the cipher decision scheme for export ciphers: the export bits are
9175 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
9176 SSL_EXP_MASK. So, the original variable has to be used instead of the
9177 already masked variable.
9178 [Richard Levitte <levitte@stacken.kth.se>]
9180 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
9181 [Richard Levitte <levitte@stacken.kth.se>]
9183 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
9184 from `int' to `unsigned int' because it's a length and initialized by
9185 EVP_DigestFinal() which expects an `unsigned int *'.
9186 [Richard Levitte <levitte@stacken.kth.se>]
9188 *) Don't hard-code path to Perl interpreter on shebang line of Configure
9189 script. Instead use the usual Shell->Perl transition trick.
9190 [Ralf S. Engelschall]
9192 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
9193 (in addition to RSA certificates) to match the behaviour of `openssl dsa
9194 -noout -modulus' as it's already the case for `openssl rsa -noout
9195 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
9196 currently the public key is printed (a decision which was already done by
9197 `openssl dsa -modulus' in the past) which serves a similar purpose.
9198 Additionally the NO_RSA no longer completely removes the whole -modulus
9199 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
9201 [Ralf S. Engelschall]
9203 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
9204 BIO. See the source (crypto/evp/bio_ok.c) for more info.
9205 [Arne Ansper <arne@ats.cyber.ee>]
9207 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
9208 to be added. Now both 'req' and 'ca' can use new objects defined in the
9212 *) Add cool BIO that does syslog (or event log on NT).
9213 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
9215 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
9216 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
9217 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
9218 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
9221 *) Add preliminary config info for new extension code.
9224 *) Make RSA_NO_PADDING really use no padding.
9225 [Ulf Moeller <ulf@fitug.de>]
9227 *) Generate errors when private/public key check is done.
9230 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
9231 for some CRL extensions and new objects added.
9234 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
9235 key usage extension and fuller support for authority key id.
9238 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
9239 padding method for RSA, which is recommended for new applications in PKCS
9240 #1 v2.0 (RFC 2437, October 1998).
9241 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
9242 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
9243 against Bleichbacher's attack on RSA.
9244 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
9247 *) Updates to the new SSL compression code
9248 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9250 *) Fix so that the version number in the master secret, when passed
9251 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
9252 (because the server will not accept higher), that the version number
9253 is 0x03,0x01, not 0x03,0x00
9254 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9256 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
9257 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
9258 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
9261 *) Support for RAW extensions where an arbitrary extension can be
9262 created by including its DER encoding. See apps/openssl.cnf for
9266 *) Make sure latest Perl versions don't interpret some generated C array
9267 code as Perl array code in the crypto/err/err_genc.pl script.
9268 [Lars Weber <3weber@informatik.uni-hamburg.de>]
9270 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
9271 not many people have the assembler. Various Win32 compilation fixes and
9272 update to the INSTALL.W32 file with (hopefully) more accurate Win32
9276 *) Modify configure script 'Configure' to automatically create crypto/date.h
9277 file under Win32 and also build pem.h from pem.org. New script
9278 util/mkfiles.pl to create the MINFO file on environments that can't do a
9279 'make files': perl util/mkfiles.pl >MINFO should work.
9282 *) Major rework of DES function declarations, in the pursuit of correctness
9283 and purity. As a result, many evil casts evaporated, and some weirdness,
9284 too. You may find this causes warnings in your code. Zapping your evil
9285 casts will probably fix them. Mostly.
9288 *) Fix for a typo in asn1.h. Bug fix to object creation script
9289 obj_dat.pl. It considered a zero in an object definition to mean
9290 "end of object": none of the objects in objects.h have any zeros
9291 so it wasn't spotted.
9292 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
9294 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
9295 Masking (CBCM). In the absence of test vectors, the best I have been able
9296 to do is check that the decrypt undoes the encrypt, so far. Send me test
9297 vectors if you have them.
9300 *) Correct calculation of key length for export ciphers (too much space was
9301 allocated for null ciphers). This has not been tested!
9304 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
9305 message is now correct (it understands "crypto" and "ssl" on its
9306 command line). There is also now an "update" option. This will update
9307 the util/ssleay.num and util/libeay.num files with any new functions.
9309 perl util/mkdef.pl crypto ssl update
9310 it will update them.
9313 *) Overhauled the Perl interface (perl/*):
9314 - ported BN stuff to OpenSSL's different BN library
9315 - made the perl/ source tree CVS-aware
9316 - renamed the package from SSLeay to OpenSSL (the files still contain
9317 their history because I've copied them in the repository)
9318 - removed obsolete files (the test scripts will be replaced
9319 by better Test::Harness variants in the future)
9320 [Ralf S. Engelschall]
9322 *) First cut for a very conservative source tree cleanup:
9323 1. merge various obsolete readme texts into doc/ssleay.txt
9324 where we collect the old documents and readme texts.
9325 2. remove the first part of files where I'm already sure that we no
9326 longer need them because of three reasons: either they are just temporary
9327 files which were left by Eric or they are preserved original files where
9328 I've verified that the diff is also available in the CVS via "cvs diff
9329 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
9330 the crypto/md/ stuff).
9331 [Ralf S. Engelschall]
9333 *) More extension code. Incomplete support for subject and issuer alt
9334 name, issuer and authority key id. Change the i2v function parameters
9335 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
9336 what that's for :-) Fix to ASN1 macro which messed up
9337 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
9340 *) Preliminary support for ENUMERATED type. This is largely copied from the
9344 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
9345 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9347 *) Make sure `make rehash' target really finds the `openssl' program.
9348 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
9350 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
9351 like to hear about it if this slows down other processors.
9354 *) Add CygWin32 platform information to Configure script.
9355 [Alan Batie <batie@aahz.jf.intel.com>]
9357 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
9358 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
9360 *) New program nseq to manipulate netscape certificate sequences
9363 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
9367 *) Fixes to BN code. Previously the default was to define BN_RECURSION
9368 but the BN code had some problems that would cause failures when
9369 doing certificate verification and some other functions.
9370 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
9372 *) Add ASN1 and PEM code to support netscape certificate sequences.
9375 *) Add ASN1 and PEM code to support netscape certificate sequences.
9378 *) Add several PKIX and private extended key usage OIDs.
9381 *) Modify the 'ca' program to handle the new extension code. Modify
9382 openssl.cnf for new extension format, add comments.
9385 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
9386 and add a sample to openssl.cnf so req -x509 now adds appropriate
9390 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
9391 error code, add initial support to X509_print() and x509 application.
9394 *) Takes a deep breath and start addding X509 V3 extension support code. Add
9395 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
9396 stuff is currently isolated and isn't even compiled yet.
9399 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
9400 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
9401 Removed the versions check from X509 routines when loading extensions:
9402 this allows certain broken certificates that don't set the version
9403 properly to be processed.
9406 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
9407 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
9408 can still be regenerated with "make depend".
9411 *) Spelling mistake in C version of CAST-128.
9412 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
9414 *) Changes to the error generation code. The perl script err-code.pl
9415 now reads in the old error codes and retains the old numbers, only
9416 adding new ones if necessary. It also only changes the .err files if new
9417 codes are added. The makefiles have been modified to only insert errors
9418 when needed (to avoid needlessly modifying header files). This is done
9419 by only inserting errors if the .err file is newer than the auto generated
9420 C file. To rebuild all the error codes from scratch (the old behaviour)
9421 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
9422 or delete all the .err files.
9425 *) CAST-128 was incorrectly implemented for short keys. The C version has
9426 been fixed, but is untested. The assembler versions are also fixed, but
9427 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
9428 to regenerate it if needed.
9429 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
9430 Hagino <itojun@kame.net>]
9432 *) File was opened incorrectly in randfile.c.
9433 [Ulf Möller <ulf@fitug.de>]
9435 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
9436 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
9437 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
9438 al: it's just almost always a UTCTime. Note this patch adds new error
9439 codes so do a "make errors" if there are problems.
9442 *) Correct Linux 1 recognition in config.
9443 [Ulf Möller <ulf@fitug.de>]
9445 *) Remove pointless MD5 hash when using DSA keys in ca.
9446 [Anonymous <nobody@replay.com>]
9448 *) Generate an error if given an empty string as a cert directory. Also
9449 generate an error if handed NULL (previously returned 0 to indicate an
9450 error, but didn't set one).
9451 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
9453 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
9456 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
9457 parameters. This was causing a warning which killed off the Win32 compile.
9460 *) Remove C++ style comments from crypto/bn/bn_local.h.
9461 [Neil Costigan <neil.costigan@celocom.com>]
9463 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
9464 based on a text string, looking up short and long names and finally
9465 "dot" format. The "dot" format stuff didn't work. Added new function
9466 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
9467 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
9468 OID is not part of the table.
9471 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
9472 X509_LOOKUP_by_alias().
9475 *) Sort openssl functions by name.
9478 *) Get the gendsa program working (hopefully) and add it to app list. Remove
9479 encryption from sample DSA keys (in case anyone is interested the password
9483 *) Make _all_ *_free functions accept a NULL pointer.
9484 [Frans Heymans <fheymans@isaserver.be>]
9486 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
9488 [Anonymous <nobody@replay.com>]
9490 *) s_server should send the CAfile as acceptable CAs, not its own cert.
9491 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9493 *) Don't blow it for numeric -newkey arguments to apps/req.
9494 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
9496 *) Temp key "for export" tests were wrong in s3_srvr.c.
9497 [Anonymous <nobody@replay.com>]
9499 *) Add prototype for temp key callback functions
9500 SSL_CTX_set_tmp_{rsa,dh}_callback().
9503 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
9504 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
9507 *) X509_name_add_entry() freed the wrong thing after an error.
9508 [Arne Ansper <arne@ats.cyber.ee>]
9510 *) rsa_eay.c would attempt to free a NULL context.
9511 [Arne Ansper <arne@ats.cyber.ee>]
9513 *) BIO_s_socket() had a broken should_retry() on Windoze.
9514 [Arne Ansper <arne@ats.cyber.ee>]
9516 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
9517 [Arne Ansper <arne@ats.cyber.ee>]
9519 *) Make sure the already existing X509_STORE->depth variable is initialized
9520 in X509_STORE_new(), but document the fact that this variable is still
9521 unused in the certificate verification process.
9522 [Ralf S. Engelschall]
9524 *) Fix the various library and apps files to free up pkeys obtained from
9525 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
9528 *) Fix reference counting in X509_PUBKEY_get(). This makes
9529 demos/maurice/example2.c work, amongst others, probably.
9530 [Steve Henson and Ben Laurie]
9532 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
9533 `openssl' and second, the shortcut symlinks for the `openssl <command>'
9534 are no longer created. This way we have a single and consistent command
9535 line interface `openssl <command>', similar to `cvs <command>'.
9536 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
9538 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
9539 BIT STRING wrapper always have zero unused bits.
9542 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
9545 *) Make the top-level INSTALL documentation easier to understand.
9548 *) Makefiles updated to exit if an error occurs in a sub-directory
9549 make (including if user presses ^C) [Paul Sutton]
9551 *) Make Montgomery context stuff explicit in RSA data structure.
9554 *) Fix build order of pem and err to allow for generated pem.h.
9557 *) Fix renumbering bug in X509_NAME_delete_entry().
9560 *) Enhanced the err-ins.pl script so it makes the error library number
9561 global and can add a library name. This is needed for external ASN1 and
9562 other error libraries.
9565 *) Fixed sk_insert which never worked properly.
9568 *) Fix ASN1 macros so they can handle indefinite length construted
9569 EXPLICIT tags. Some non standard certificates use these: they can now
9573 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
9574 into a single doc/ssleay.txt bundle. This way the information is still
9575 preserved but no longer messes up this directory. Now it's new room for
9576 the new set of documenation files.
9577 [Ralf S. Engelschall]
9579 *) SETs were incorrectly DER encoded. This was a major pain, because they
9580 shared code with SEQUENCEs, which aren't coded the same. This means that
9581 almost everything to do with SETs or SEQUENCEs has either changed name or
9582 number of arguments.
9583 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
9585 *) Fix test data to work with the above.
9588 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
9589 was already fixed by Eric for 0.9.1 it seems.
9590 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
9592 *) Autodetect FreeBSD3.
9595 *) Fix various bugs in Configure. This affects the following platforms:
9599 unixware-2.0-pentium
9603 *) Eliminate generated files from CVS. Reorder tests to regenerate files
9604 before they are needed.
9607 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
9611 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
9613 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
9614 changed SSLeay to OpenSSL in version strings.
9615 [Ralf S. Engelschall]
9617 *) Some fixups to the top-level documents.
9620 *) Fixed the nasty bug where rsaref.h was not found under compile-time
9621 because the symlink to include/ was missing.
9622 [Ralf S. Engelschall]
9624 *) Incorporated the popular no-RSA/DSA-only patches
9625 which allow to compile a RSA-free SSLeay.
9626 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
9628 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
9629 when "ssleay" is still not found.
9630 [Ralf S. Engelschall]
9632 *) Added more platforms to Configure: Cray T3E, HPUX 11,
9633 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
9635 *) Updated the README file.
9636 [Ralf S. Engelschall]
9638 *) Added various .cvsignore files in the CVS repository subdirs
9639 to make a "cvs update" really silent.
9640 [Ralf S. Engelschall]
9642 *) Recompiled the error-definition header files and added
9643 missing symbols to the Win32 linker tables.
9644 [Ralf S. Engelschall]
9646 *) Cleaned up the top-level documents;
9647 o new files: CHANGES and LICENSE
9648 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
9649 o merged COPYRIGHT into LICENSE
9650 o removed obsolete TODO file
9651 o renamed MICROSOFT to INSTALL.W32
9652 [Ralf S. Engelschall]
9654 *) Removed dummy files from the 0.9.1b source tree:
9655 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
9656 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
9657 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
9658 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
9659 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
9660 [Ralf S. Engelschall]
9662 *) Added various platform portability fixes.
9665 *) The Genesis of the OpenSSL rpject:
9666 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
9667 Young and Tim J. Hudson created while they were working for C2Net until
9669 [The OpenSSL Project]
9672 Changes between 0.9.0b and 0.9.1b [not released]
9674 *) Updated a few CA certificates under certs/
9677 *) Changed some BIGNUM api stuff.
9680 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
9681 DGUX x86, Linux Alpha, etc.
9684 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
9685 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
9689 *) Add -strparse option to asn1pars program which parses nested
9691 [Dr Stephen Henson <shenson@bigfoot.com>]
9693 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
9696 *) DSA fix for "ca" program.
9699 *) Added "-genkey" option to "dsaparam" program.
9702 *) Added RIPE MD160 (rmd160) message digest.
9705 *) Added -a (all) option to "ssleay version" command.
9708 *) Added PLATFORM define which is the id given to Configure.
9711 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
9714 *) Extended the ASN.1 parser routines.
9717 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
9720 *) Added a BN_CTX to the BN library.
9723 *) Fixed the weak key values in DES library
9726 *) Changed API in EVP library for cipher aliases.
9729 *) Added support for RC2/64bit cipher.
9732 *) Converted the lhash library to the crypto/mem.c functions.
9735 *) Added more recognized ASN.1 object ids.
9738 *) Added more RSA padding checks for SSL/TLS.
9741 *) Added BIO proxy/filter functionality.
9744 *) Added extra_certs to SSL_CTX which can be used
9745 send extra CA certificates to the client in the CA cert chain sending
9746 process. It can be configured with SSL_CTX_add_extra_chain_cert().
9749 *) Now Fortezza is denied in the authentication phase because
9750 this is key exchange mechanism is not supported by SSLeay at all.
9753 *) Additional PKCS1 checks.
9756 *) Support the string "TLSv1" for all TLS v1 ciphers.
9759 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
9760 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
9763 *) Fixed a few memory leaks.
9766 *) Fixed various code and comment typos.
9769 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
9770 bytes sent in the client random.
9771 [Edward Bishop <ebishop@spyglass.com>]