5 Changes between 0.9.8b and 0.9.8c [xx XXX xxxx]
7 *) Change the Unix randomness entropy gathering to use poll() when
8 possible instead of select(), since the latter has some
9 undesirable limitations.
10 [Darryl Miles via Richard Levitte and Bodo Moeller]
12 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
13 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
14 cannot be implicitly activated as part of, e.g., the "AES" alias.
15 However, please upgrade to OpenSSL 0.9.9[-dev] for
16 non-experimental use of the ECC ciphersuites to get TLS extension
17 support, which is required for curve and point format negotiation
18 to avoid potential handshake problems.
21 *) Disable rogue ciphersuites:
23 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
24 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
25 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
27 The latter two were purportedly from
28 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
31 Also deactive the remaining ciphersuites from
32 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
33 unofficial, and the ID has long expired.
36 *) Fix RSA blinding Heisenbug (problems sometimes occured on
37 dual-core machines) and other potential thread-safety issues.
40 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
41 versions), which is now available for royalty-free use
42 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
43 Also, add Camellia TLS ciphersuites from RFC 4132.
45 To minimize changes between patchlevels in the OpenSSL 0.9.8
46 series, Camellia remains excluded from compilation unless OpenSSL
47 is configured with 'enable-camellia'.
50 *) Disable the padding bug check when compression is in use. The padding
51 bug check assumes the first packet is of even length, this is not
52 necessarily true if compresssion is enabled and can result in false
53 positives causing handshake failure. The actual bug test is ancient
54 code so it is hoped that implementations will either have fixed it by
55 now or any which still have the bug do not support compression.
58 Changes between 0.9.8a and 0.9.8b [04 May 2006]
60 *) When applying a cipher rule check to see if string match is an explicit
61 cipher suite and only match that one cipher suite if it is.
64 *) Link in manifests for VC++ if needed.
65 [Austin Ziegler <halostatue@gmail.com>]
67 *) Update support for ECC-based TLS ciphersuites according to
68 draft-ietf-tls-ecc-12.txt with proposed changes (but without
69 TLS extensions, which are supported starting with the 0.9.9
70 branch, not in the OpenSSL 0.9.8 branch).
73 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
74 opaque EVP_CIPHER_CTX handling.
77 *) Fixes and enhancements to zlib compression code. We now only use
78 "zlib1.dll" and use the default __cdecl calling convention on Win32
79 to conform with the standards mentioned here:
80 http://www.zlib.net/DLL_FAQ.txt
81 Static zlib linking now works on Windows and the new --with-zlib-include
82 --with-zlib-lib options to Configure can be used to supply the location
83 of the headers and library. Gracefully handle case where zlib library
87 *) Several fixes and enhancements to the OID generation code. The old code
88 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
89 handle numbers larger than ULONG_MAX, truncated printing and had a
90 non standard OBJ_obj2txt() behaviour.
93 *) Add support for building of engines under engine/ as shared libraries
94 under VC++ build system.
97 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
98 Hopefully, we will not see any false combination of paths any more.
101 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
103 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
104 (part of SSL_OP_ALL). This option used to disable the
105 countermeasure against man-in-the-middle protocol-version
106 rollback in the SSL 2.0 server implementation, which is a bad
107 idea. (CVE-2005-2969)
109 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
110 for Information Security, National Institute of Advanced Industrial
111 Science and Technology [AIST], Japan)]
113 *) Add two function to clear and return the verify parameter flags.
116 *) Keep cipherlists sorted in the source instead of sorting them at
117 runtime, thus removing the need for a lock.
120 *) Avoid some small subgroup attacks in Diffie-Hellman.
121 [Nick Mathewson and Ben Laurie]
123 *) Add functions for well-known primes.
126 *) Extended Windows CE support.
127 [Satoshi Nakamura and Andy Polyakov]
129 *) Initialize SSL_METHOD structures at compile time instead of during
130 runtime, thus removing the need for a lock.
133 *) Make PKCS7_decrypt() work even if no certificate is supplied by
134 attempting to decrypt each encrypted key in turn. Add support to
138 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
140 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
143 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
146 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
147 key into the same file any more.
150 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
153 *) Add -utf8 command line and config file option to 'ca'.
154 [Stefan <stf@udoma.org]
156 *) Removed the macro des_crypt(), as it seems to conflict with some
157 libraries. Use DES_crypt().
160 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
161 involves renaming the source and generated shared-libs for
162 both. The engines will accept the corrected or legacy ids
163 ('ncipher' and '4758_cca' respectively) when binding. NB,
164 this only applies when building 'shared'.
165 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
167 *) Add attribute functions to EVP_PKEY structure. Modify
168 PKCS12_create() to recognize a CSP name attribute and
169 use it. Make -CSP option work again in pkcs12 utility.
172 *) Add new functionality to the bn blinding code:
173 - automatic re-creation of the BN_BLINDING parameters after
174 a fixed number of uses (currently 32)
175 - add new function for parameter creation
176 - introduce flags to control the update behaviour of the
177 BN_BLINDING parameters
178 - hide BN_BLINDING structure
179 Add a second BN_BLINDING slot to the RSA structure to improve
180 performance when a single RSA object is shared among several
184 *) Add support for DTLS.
185 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
187 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
188 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
191 *) Remove buggy and incompletet DH cert support from
192 ssl/ssl_rsa.c and ssl/s3_both.c
195 *) Use SHA-1 instead of MD5 as the default digest algorithm for
196 the apps/openssl applications.
199 *) Compile clean with "-Wall -Wmissing-prototypes
200 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
201 DEBUG_SAFESTACK must also be set.
204 *) Change ./Configure so that certain algorithms can be disabled by default.
205 The new counterpiece to "no-xxx" is "enable-xxx".
207 The patented RC5 and MDC2 algorithms will now be disabled unless
208 "enable-rc5" and "enable-mdc2", respectively, are specified.
210 (IDEA remains enabled despite being patented. This is because IDEA
211 is frequently required for interoperability, and there is no license
212 fee for non-commercial use. As before, "no-idea" can be used to
213 avoid this algorithm.)
217 *) Add processing of proxy certificates (see RFC 3820). This work was
218 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
219 EGEE (Enabling Grids for E-science in Europe).
222 *) RC4 performance overhaul on modern architectures/implementations, such
223 as Intel P4, IA-64 and AMD64.
226 *) New utility extract-section.pl. This can be used specify an alternative
227 section number in a pod file instead of having to treat each file as
228 a separate case in Makefile. This can be done by adding two lines to the
231 =for comment openssl_section:XXX
233 The blank line is mandatory.
237 *) New arguments -certform, -keyform and -pass for s_client and s_server
238 to allow alternative format key and certificate files and passphrase
242 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
243 update associated structures and add various utility functions.
245 Add new policy related verify parameters, include policy checking in
246 standard verify code. Enhance 'smime' application with extra parameters
247 to support policy checking and print out.
250 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
251 Nehemiah processors. These extensions support AES encryption in hardware
252 as well as RNG (though RNG support is currently disabled).
253 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
255 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
258 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
259 [Andy Polyakov and a number of other people]
261 *) Improved PowerPC platform support. Most notably BIGNUM assembler
262 implementation contributed by IBM.
263 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
265 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
266 exponent rather than 'unsigned long'. There is a corresponding change to
267 the new 'rsa_keygen' element of the RSA_METHOD structure.
268 [Jelte Jansen, Geoff Thorpe]
270 *) Functionality for creating the initial serial number file is now
271 moved from CA.pl to the 'ca' utility with a new option -create_serial.
273 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
274 number file to 1, which is bound to cause problems. To avoid
275 the problems while respecting compatibility between different 0.9.7
276 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
277 CA.pl for serial number initialization. With the new release 0.9.8,
278 we can fix the problem directly in the 'ca' utility.)
281 *) Reduced header interdepencies by declaring more opaque objects in
282 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
283 give fewer recursive includes, which could break lazy source code - so
284 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
285 developers should define this symbol when building and using openssl to
286 ensure they track the recommended behaviour, interfaces, [etc], but
287 backwards-compatible behaviour prevails when this isn't defined.
290 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
293 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
294 This will generate a random key of the appropriate length based on the
295 cipher context. The EVP_CIPHER can provide its own random key generation
296 routine to support keys of a specific form. This is used in the des and
297 3des routines to generate a key of the correct parity. Update S/MIME
298 code to use new functions and hence generate correct parity DES keys.
299 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
300 valid (weak or incorrect parity).
303 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
304 as looking them up. This is useful when the verified structure may contain
305 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
306 present unless the new PKCS7_NO_CRL flag is asserted.
309 *) Extend ASN1 oid configuration module. It now additionally accepts the
312 shortName = some long name, 1.2.3.4
315 *) Reimplemented the BN_CTX implementation. There is now no more static
316 limitation on the number of variables it can handle nor the depth of the
317 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
318 information can now expand as required, and rather than having a single
319 static array of bignums, BN_CTX now uses a linked-list of such arrays
320 allowing it to expand on demand whilst maintaining the usefulness of
324 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
325 to allow all RSA operations to function using a single BN_CTX.
328 *) Preliminary support for certificate policy evaluation and checking. This
329 is initially intended to pass the tests outlined in "Conformance Testing
330 of Relying Party Client Certificate Path Processing Logic" v1.07.
333 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
334 remained unused and not that useful. A variety of other little bignum
335 tweaks and fixes have also been made continuing on from the audit (see
339 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
340 associated ASN1, EVP and SSL functions and old ASN1 macros.
343 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
344 and this should never fail. So the return value from the use of
345 BN_set_word() (which can fail due to needless expansion) is now deprecated;
346 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
349 *) BN_CTX_get() should return zero-valued bignums, providing the same
350 initialised value as BN_new().
351 [Geoff Thorpe, suggested by Ulf Möller]
353 *) Support for inhibitAnyPolicy certificate extension.
356 *) An audit of the BIGNUM code is underway, for which debugging code is
357 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
358 is considered valid when processing BIGNUMs, and causes execution to
359 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
360 further steps are taken to deliberately pollute unused data in BIGNUM
361 structures to try and expose faulty code further on. For now, openssl will
362 (in its default mode of operation) continue to tolerate the inconsistent
363 forms that it has tolerated in the past, but authors and packagers should
364 consider trying openssl and their own applications when compiled with
365 these debugging symbols defined. It will help highlight potential bugs in
366 their own code, and will improve the test coverage for OpenSSL itself. At
367 some point, these tighter rules will become openssl's default to improve
368 maintainability, though the assert()s and other overheads will remain only
369 in debugging configurations. See bn.h for more details.
370 [Geoff Thorpe, Nils Larsch, Ulf Möller]
372 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
373 that can only be obtained through BN_CTX_new() (which implicitly
374 initialises it). The presence of this function only made it possible
375 to overwrite an existing structure (and cause memory leaks).
378 *) Because of the callback-based approach for implementing LHASH as a
379 template type, lh_insert() adds opaque objects to hash-tables and
380 lh_doall() or lh_doall_arg() are typically used with a destructor callback
381 to clean up those corresponding objects before destroying the hash table
382 (and losing the object pointers). So some over-zealous constifications in
383 LHASH have been relaxed so that lh_insert() does not take (nor store) the
384 objects as "const" and the lh_doall[_arg] callback wrappers are not
385 prototyped to have "const" restrictions on the object pointers they are
386 given (and so aren't required to cast them away any more).
389 *) The tmdiff.h API was so ugly and minimal that our own timing utility
390 (speed) prefers to use its own implementation. The two implementations
391 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
392 its object type properly exposed (MS_TM) instead of casting to/from "char
393 *". This may still change yet if someone realises MS_TM and "ms_time_***"
394 aren't necessarily the greatest nomenclatures - but this is what was used
395 internally to the implementation so I've used that for now.
398 *) Ensure that deprecated functions do not get compiled when
399 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
400 the self-tests were still using deprecated key-generation functions so
401 these have been updated also.
404 *) Reorganise PKCS#7 code to separate the digest location functionality
405 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
406 New function PKCS7_set_digest() to set the digest type for PKCS#7
407 digestedData type. Add additional code to correctly generate the
408 digestedData type and add support for this type in PKCS7 initialization
412 *) New function PKCS7_set0_type_other() this initializes a PKCS7
413 structure of type "other".
416 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
417 sure the loop does correctly stop and breaking ("division by zero")
418 modulus operations are not performed. The (pre-generated) prime
419 table crypto/bn/bn_prime.h was already correct, but it could not be
420 re-generated on some platforms because of the "division by zero"
421 situation in the script.
422 [Ralf S. Engelschall]
424 *) Update support for ECC-based TLS ciphersuites according to
425 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
426 SHA-1 now is only used for "small" curves (where the
427 representation of a field element takes up to 24 bytes); for
428 larger curves, the field element resulting from ECDH is directly
429 used as premaster secret.
430 [Douglas Stebila (Sun Microsystems Laboratories)]
432 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
433 curve secp160r1 to the tests.
434 [Douglas Stebila (Sun Microsystems Laboratories)]
436 *) Add the possibility to load symbols globally with DSO.
437 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
439 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
440 control of the error stack.
443 *) Add support for STORE in ENGINE.
446 *) Add the STORE type. The intention is to provide a common interface
447 to certificate and key stores, be they simple file-based stores, or
448 HSM-type store, or LDAP stores, or...
449 NOTE: The code is currently UNTESTED and isn't really used anywhere.
452 *) Add a generic structure called OPENSSL_ITEM. This can be used to
453 pass a list of arguments to any function as well as provide a way
454 for a function to pass data back to the caller.
457 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
458 works like BUF_strdup() but can be used to duplicate a portion of
459 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
463 *) Add the function sk_find_ex() which works like sk_find(), but will
464 return an index to an element even if an exact match couldn't be
465 found. The index is guaranteed to point at the element where the
466 searched-for key would be inserted to preserve sorting order.
469 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
470 takes an extra flags argument for optional functionality. Currently,
471 the following flags are defined:
473 OBJ_BSEARCH_VALUE_ON_NOMATCH
474 This one gets OBJ_bsearch_ex() to return a pointer to the first
475 element where the comparing function returns a negative or zero
478 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
479 This one gets OBJ_bsearch_ex() to return a pointer to the first
480 element where the comparing function returns zero. This is useful
481 if there are more than one element where the comparing function
485 *) Make it possible to create self-signed certificates with 'openssl ca'
486 in such a way that the self-signed certificate becomes part of the
487 CA database and uses the same mechanisms for serial number generation
488 as all other certificate signing. The new flag '-selfsign' enables
489 this functionality. Adapt CA.sh and CA.pl.in.
492 *) Add functionality to check the public key of a certificate request
493 against a given private. This is useful to check that a certificate
494 request can be signed by that key (self-signing).
497 *) Make it possible to have multiple active certificates with the same
498 subject in the CA index file. This is done only if the keyword
499 'unique_subject' is set to 'no' in the main CA section (default
500 if 'CA_default') of the configuration file. The value is saved
501 with the database itself in a separate index attribute file,
502 named like the index file with '.attr' appended to the name.
505 *) Generate muti valued AVAs using '+' notation in config files for
509 *) Support for nameConstraints certificate extension.
512 *) Support for policyConstraints certificate extension.
515 *) Support for policyMappings certificate extension.
518 *) Make sure the default DSA_METHOD implementation only uses its
519 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
520 and change its own handlers to be NULL so as to remove unnecessary
521 indirection. This lets alternative implementations fallback to the
522 default implementation more easily.
525 *) Support for directoryName in GeneralName related extensions
529 *) Make it possible to link applications using Makefile.shared.
530 Make that possible even when linking against static libraries!
533 *) Support for single pass processing for S/MIME signing. This now
534 means that S/MIME signing can be done from a pipe, in addition
535 cleartext signing (multipart/signed type) is effectively streaming
536 and the signed data does not need to be all held in memory.
538 This is done with a new flag PKCS7_STREAM. When this flag is set
539 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
540 is done after the data is output (and digests calculated) in
544 *) Add full support for -rpath/-R, both in shared libraries and
545 applications, at least on the platforms where it's known how
549 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
550 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
551 will now compute a table of multiples of the generator that
552 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
553 faster (notably in the case of a single point multiplication,
555 [Nils Larsch, Bodo Moeller]
557 *) IPv6 support for certificate extensions. The various extensions
558 which use the IP:a.b.c.d can now take IPv6 addresses using the
559 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
563 *) Added an ENGINE that implements RSA by performing private key
564 exponentiations with the GMP library. The conversions to and from
565 GMP's mpz_t format aren't optimised nor are any montgomery forms
566 cached, and on x86 it appears OpenSSL's own performance has caught up.
567 However there are likely to be other architectures where GMP could
568 provide a boost. This ENGINE is not built in by default, but it can be
569 specified at Configure time and should be accompanied by the necessary
570 linker additions, eg;
571 ./config -DOPENSSL_USE_GMP -lgmp
574 *) "openssl engine" will not display ENGINE/DSO load failure errors when
575 testing availability of engines with "-t" - the old behaviour is
576 produced by increasing the feature's verbosity with "-tt".
579 *) ECDSA routines: under certain error conditions uninitialized BN objects
580 could be freed. Solution: make sure initialization is performed early
581 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
585 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
586 and DH_METHOD (eg. by ENGINE implementations) to override the normal
587 software implementations. For DSA and DH, parameter generation can
588 also be overriden by providing the appropriate method callbacks.
591 *) Change the "progress" mechanism used in key-generation and
592 primality testing to functions that take a new BN_GENCB pointer in
593 place of callback/argument pairs. The new API functions have "_ex"
594 postfixes and the older functions are reimplemented as wrappers for
595 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
596 declarations of the old functions to help (graceful) attempts to
597 migrate to the new functions. Also, the new key-generation API
598 functions operate on a caller-supplied key-structure and return
599 success/failure rather than returning a key or NULL - this is to
600 help make "keygen" another member function of RSA_METHOD etc.
602 Example for using the new callback interface:
604 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
608 BN_GENCB_set(&my_cb, my_callback, my_arg);
610 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
611 /* For the meaning of a, b in calls to my_callback(), see the
612 * documentation of the function that calls the callback.
613 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
614 * my_callback should return 1 if it wants BN_is_prime_ex()
615 * to continue, or 0 to stop.
620 *) Change the ZLIB compression method to be stateful, and make it
621 available to TLS with the number defined in
622 draft-ietf-tls-compression-04.txt.
625 *) Add the ASN.1 structures and functions for CertificatePair, which
626 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
628 CertificatePair ::= SEQUENCE {
629 forward [0] Certificate OPTIONAL,
630 reverse [1] Certificate OPTIONAL,
631 -- at least one of the pair shall be present -- }
633 Also implement the PEM functions to read and write certificate
634 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
636 This needed to be defined, mostly for the sake of the LDAP
637 attribute crossCertificatePair, but may prove useful elsewhere as
641 *) Make it possible to inhibit symlinking of shared libraries in
642 Makefile.shared, for Cygwin's sake.
645 *) Extend the BIGNUM API by creating a function
646 void BN_set_negative(BIGNUM *a, int neg);
647 and a macro that behave like
648 int BN_is_negative(const BIGNUM *a);
650 to avoid the need to access 'a->neg' directly in applications.
653 *) Implement fast modular reduction for pseudo-Mersenne primes
654 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
655 EC_GROUP_new_curve_GFp() will now automatically use this
657 [Nils Larsch <nla@trustcenter.de>]
659 *) Add new lock type (CRYPTO_LOCK_BN).
662 *) Change the ENGINE framework to automatically load engines
663 dynamically from specific directories unless they could be
664 found to already be built in or loaded. Move all the
665 current engines except for the cryptodev one to a new
667 The engines in engines/ are built as shared libraries if
668 the "shared" options was given to ./Configure or ./config.
669 Otherwise, they are inserted in libcrypto.a.
670 /usr/local/ssl/engines is the default directory for dynamic
671 engines, but that can be overriden at configure time through
672 the usual use of --prefix and/or --openssldir, and at run
673 time with the environment variable OPENSSL_ENGINES.
674 [Geoff Thorpe and Richard Levitte]
676 *) Add Makefile.shared, a helper makefile to build shared
677 libraries. Addapt Makefile.org.
680 *) Add version info to Win32 DLLs.
681 [Peter 'Luna' Runestig" <peter@runestig.com>]
683 *) Add new 'medium level' PKCS#12 API. Certificates and keys
684 can be added using this API to created arbitrary PKCS#12
685 files while avoiding the low level API.
687 New options to PKCS12_create(), key or cert can be NULL and
688 will then be omitted from the output file. The encryption
689 algorithm NIDs can be set to -1 for no encryption, the mac
690 iteration count can be set to 0 to omit the mac.
692 Enhance pkcs12 utility by making the -nokeys and -nocerts
693 options work when creating a PKCS#12 file. New option -nomac
694 to omit the mac, NONE can be set for an encryption algorithm.
695 New code is modified to use the enhanced PKCS12_create()
696 instead of the low level API.
699 *) Extend ASN1 encoder to support indefinite length constructed
700 encoding. This can output sequences tags and octet strings in
701 this form. Modify pk7_asn1.c to support indefinite length
702 encoding. This is experimental and needs additional code to
703 be useful, such as an ASN1 bio and some enhanced streaming
706 Extend template encode functionality so that tagging is passed
707 down to the template encoder.
710 *) Let 'openssl req' fail if an argument to '-newkey' is not
711 recognized instead of using RSA as a default.
714 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
715 As these are not official, they are not included in "ALL";
716 the "ECCdraft" ciphersuite group alias can be used to select them.
717 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
719 *) Add ECDH engine support.
720 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
722 *) Add ECDH in new directory crypto/ecdh/.
723 [Douglas Stebila (Sun Microsystems Laboratories)]
725 *) Let BN_rand_range() abort with an error after 100 iterations
726 without success (which indicates a broken PRNG).
729 *) Change BN_mod_sqrt() so that it verifies that the input value
730 is really the square of the return value. (Previously,
731 BN_mod_sqrt would show GIGO behaviour.)
734 *) Add named elliptic curves over binary fields from X9.62, SECG,
735 and WAP/WTLS; add OIDs that were still missing.
737 [Sheueling Chang Shantz and Douglas Stebila
738 (Sun Microsystems Laboratories)]
740 *) Extend the EC library for elliptic curves over binary fields
741 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
744 EC_GF2m_simple_method
748 EC_GROUP_new_curve_GF2m
749 EC_GROUP_set_curve_GF2m
750 EC_GROUP_get_curve_GF2m
751 EC_POINT_set_affine_coordinates_GF2m
752 EC_POINT_get_affine_coordinates_GF2m
753 EC_POINT_set_compressed_coordinates_GF2m
755 Point compression for binary fields is disabled by default for
756 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
759 As binary polynomials are represented as BIGNUMs, various members
760 of the EC_GROUP and EC_POINT data structures can be shared
761 between the implementations for prime fields and binary fields;
762 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
763 are essentially identical to their ..._GFp counterparts.
764 (For simplicity, the '..._GFp' prefix has been dropped from
765 various internal method names.)
767 An internal 'field_div' method (similar to 'field_mul' and
768 'field_sqr') has been added; this is used only for binary fields.
770 [Sheueling Chang Shantz and Douglas Stebila
771 (Sun Microsystems Laboratories)]
773 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
774 through methods ('mul', 'precompute_mult').
776 The generic implementations (now internally called 'ec_wNAF_mul'
777 and 'ec_wNAF_precomputed_mult') remain the default if these
778 methods are undefined.
780 [Sheueling Chang Shantz and Douglas Stebila
781 (Sun Microsystems Laboratories)]
783 *) New function EC_GROUP_get_degree, which is defined through
784 EC_METHOD. For curves over prime fields, this returns the bit
785 length of the modulus.
787 [Sheueling Chang Shantz and Douglas Stebila
788 (Sun Microsystems Laboratories)]
790 *) New functions EC_GROUP_dup, EC_POINT_dup.
791 (These simply call ..._new and ..._copy).
793 [Sheueling Chang Shantz and Douglas Stebila
794 (Sun Microsystems Laboratories)]
796 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
797 Polynomials are represented as BIGNUMs (where the sign bit is not
798 used) in the following functions [macros]:
801 BN_GF2m_sub [= BN_GF2m_add]
802 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
803 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
804 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
806 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
807 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
808 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
809 BN_GF2m_cmp [= BN_ucmp]
811 (Note that only the 'mod' functions are actually for fields GF(2^m).
812 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
814 For some functions, an the irreducible polynomial defining a
815 field can be given as an 'unsigned int[]' with strictly
816 decreasing elements giving the indices of those bits that are set;
817 i.e., p[] represents the polynomial
818 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
820 p[0] > p[1] > ... > p[k] = 0.
821 This applies to the following functions:
826 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
827 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
830 BN_GF2m_mod_solve_quad_arr
834 Conversion can be performed by the following functions:
839 bntest.c has additional tests for binary polynomial arithmetic.
841 Two implementations for BN_GF2m_mod_div() are available.
842 The default algorithm simply uses BN_GF2m_mod_inv() and
843 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
844 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
845 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
847 [Sheueling Chang Shantz and Douglas Stebila
848 (Sun Microsystems Laboratories)]
850 *) Add new error code 'ERR_R_DISABLED' that can be used when some
851 functionality is disabled at compile-time.
852 [Douglas Stebila <douglas.stebila@sun.com>]
854 *) Change default behaviour of 'openssl asn1parse' so that more
855 information is visible when viewing, e.g., a certificate:
857 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
858 mode the content of non-printable OCTET STRINGs is output in a
859 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
860 avoid the appearance of a printable string.
861 [Nils Larsch <nla@trustcenter.de>]
863 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
865 EC_GROUP_set_asn1_flag()
866 EC_GROUP_get_asn1_flag()
867 EC_GROUP_set_point_conversion_form()
868 EC_GROUP_get_point_conversion_form()
869 These control ASN1 encoding details:
870 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
871 has been set to OPENSSL_EC_NAMED_CURVE.
872 - Points are encoded in uncompressed form by default; options for
873 asn1_for are as for point2oct, namely
874 POINT_CONVERSION_COMPRESSED
875 POINT_CONVERSION_UNCOMPRESSED
876 POINT_CONVERSION_HYBRID
878 Also add 'seed' and 'seed_len' members to EC_GROUP with access
882 EC_GROUP_get_seed_len()
883 This is used only for ASN1 purposes (so far).
884 [Nils Larsch <nla@trustcenter.de>]
886 *) Add 'field_type' member to EC_METHOD, which holds the NID
887 of the appropriate field type OID. The new function
888 EC_METHOD_get_field_type() returns this value.
889 [Nils Larsch <nla@trustcenter.de>]
896 providing useful interfaces to EC_POINT_point2oct() and
897 EC_POINT_oct2point().
898 [Nils Larsch <nla@trustcenter.de>]
900 *) Change internals of the EC library so that the functions
901 EC_GROUP_set_generator()
902 EC_GROUP_get_generator()
904 EC_GROUP_get_cofactor()
905 are implemented directly in crypto/ec/ec_lib.c and not dispatched
906 to methods, which would lead to unnecessary code duplication when
907 adding different types of curves.
908 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
910 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
911 arithmetic, and such that modified wNAFs are generated
912 (which avoid length expansion in many cases).
915 *) Add a function EC_GROUP_check_discriminant() (defined via
916 EC_METHOD) that verifies that the curve discriminant is non-zero.
918 Add a function EC_GROUP_check() that makes some sanity tests
919 on a EC_GROUP, its generator and order. This includes
920 EC_GROUP_check_discriminant().
921 [Nils Larsch <nla@trustcenter.de>]
923 *) Add ECDSA in new directory crypto/ecdsa/.
925 Add applications 'openssl ecparam' and 'openssl ecdsa'
926 (these are based on 'openssl dsaparam' and 'openssl dsa').
928 ECDSA support is also included in various other files across the
929 library. Most notably,
930 - 'openssl req' now has a '-newkey ecdsa:file' option;
931 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
932 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
933 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
934 them suitable for ECDSA where domain parameters must be
935 extracted before the specific public key;
936 - ECDSA engine support has been added.
937 [Nils Larsch <nla@trustcenter.de>]
939 *) Include some named elliptic curves, and add OIDs from X9.62,
940 SECG, and WAP/WTLS. Each curve can be obtained from the new
942 EC_GROUP_new_by_curve_name(),
943 and the list of available named curves can be obtained with
944 EC_get_builtin_curves().
945 Also add a 'curve_name' member to EC_GROUP objects, which can be
947 EC_GROUP_set_curve_name()
948 EC_GROUP_get_curve_name()
949 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
951 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
952 was actually never needed) and in BN_mul(). The removal in BN_mul()
953 required a small change in bn_mul_part_recursive() and the addition
954 of the functions bn_cmp_part_words(), bn_sub_part_words() and
955 bn_add_part_words(), which do the same thing as bn_cmp_words(),
956 bn_sub_words() and bn_add_words() except they take arrays with
960 Changes between 0.9.7j and 0.9.7k [xx XXX xxxx]
962 *) Change the Unix randomness entropy gathering to use poll() when
963 possible instead of select(), since the latter has some
964 undesirable limitations.
965 [Darryl Miles via Richard Levitte and Bodo Moeller]
967 *) Disable rogue ciphersuites:
969 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
970 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
971 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
973 The latter two were purportedly from
974 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
977 Also deactive the remaining ciphersuites from
978 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
979 unofficial, and the ID has long expired.
982 *) Fix RSA blinding Heisenbug (problems sometimes occured on
983 dual-core machines) and other potential thread-safety issues.
986 Changes between 0.9.7i and 0.9.7j [04 May 2006]
988 *) Adapt fipsld and the build system to link against the validated FIPS
992 *) Fixes for VC++ 2005 build under Windows.
995 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
996 from a Windows bash shell such as MSYS. It is autodetected from the
997 "config" script when run from a VC++ environment. Modify standard VC++
998 build to use fipscanister.o from the GNU make build.
1001 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
1003 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
1004 The value now differs depending on if you build for FIPS or not.
1005 BEWARE! A program linked with a shared FIPSed libcrypto can't be
1006 safely run with a non-FIPSed libcrypto, as it may crash because of
1007 the difference induced by this change.
1010 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
1012 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
1013 (part of SSL_OP_ALL). This option used to disable the
1014 countermeasure against man-in-the-middle protocol-version
1015 rollback in the SSL 2.0 server implementation, which is a bad
1016 idea. (CVE-2005-2969)
1018 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
1019 for Information Security, National Institute of Advanced Industrial
1020 Science and Technology [AIST], Japan)]
1022 *) Minimal support for X9.31 signatures and PSS padding modes. This is
1023 mainly for FIPS compliance and not fully integrated at this stage.
1026 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
1027 the exponentiation using a fixed-length exponent. (Otherwise,
1028 the information leaked through timing could expose the secret key
1029 after many signatures; cf. Bleichenbacher's attack on DSA with
1033 *) Make a new fixed-window mod_exp implementation the default for
1034 RSA, DSA, and DH private-key operations so that the sequence of
1035 squares and multiplies and the memory access pattern are
1036 independent of the particular secret key. This will mitigate
1037 cache-timing and potential related attacks.
1039 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
1040 and this is automatically used by BN_mod_exp_mont() if the new flag
1041 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
1042 will use this BN flag for private exponents unless the flag
1043 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
1044 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
1046 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
1048 *) Change the client implementation for SSLv23_method() and
1049 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
1050 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
1051 (Previously, the SSL 2.0 backwards compatible Client Hello
1052 message format would be used even with SSL_OP_NO_SSLv2.)
1055 *) Add support for smime-type MIME parameter in S/MIME messages which some
1059 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
1060 a threadsafe manner. Modify rsa code to use new function and add calls
1061 to dsa and dh code (which had race conditions before).
1064 *) Include the fixed error library code in the C error file definitions
1065 instead of fixing them up at runtime. This keeps the error code
1066 structures constant.
1069 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
1071 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
1074 *) Fixes for newer kerberos headers. NB: the casts are needed because
1075 the 'length' field is signed on one version and unsigned on another
1076 with no (?) obvious way to tell the difference, without these VC++
1077 complains. Also the "definition" of FAR (blank) is no longer included
1078 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
1079 some needed definitions.
1082 *) Undo Cygwin change.
1085 *) Added support for proxy certificates according to RFC 3820.
1086 Because they may be a security thread to unaware applications,
1087 they must be explicitely allowed in run-time. See
1088 docs/HOWTO/proxy_certificates.txt for further information.
1091 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
1093 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
1094 server and client random values. Previously
1095 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
1096 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
1098 This change has negligible security impact because:
1100 1. Server and client random values still have 24 bytes of pseudo random
1103 2. Server and client random values are sent in the clear in the initial
1106 3. The master secret is derived using the premaster secret (48 bytes in
1107 size for static RSA ciphersuites) as well as client server and random
1110 The OpenSSL team would like to thank the UK NISCC for bringing this issue
1113 [Stephen Henson, reported by UK NISCC]
1115 *) Use Windows randomness collection on Cygwin.
1118 *) Fix hang in EGD/PRNGD query when communication socket is closed
1119 prematurely by EGD/PRNGD.
1120 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
1122 *) Prompt for pass phrases when appropriate for PKCS12 input format.
1125 *) Back-port of selected performance improvements from development
1126 branch, as well as improved support for PowerPC platforms.
1129 *) Add lots of checks for memory allocation failure, error codes to indicate
1130 failure and freeing up memory if a failure occurs.
1131 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
1133 *) Add new -passin argument to dgst.
1136 *) Perform some character comparisons of different types in X509_NAME_cmp:
1137 this is needed for some certificates that reencode DNs into UTF8Strings
1138 (in violation of RFC3280) and can't or wont issue name rollover
1142 *) Make an explicit check during certificate validation to see that
1143 the CA setting in each certificate on the chain is correct. As a
1144 side effect always do the following basic checks on extensions,
1145 not just when there's an associated purpose to the check:
1147 - if there is an unhandled critical extension (unless the user
1148 has chosen to ignore this fault)
1149 - if the path length has been exceeded (if one is set at all)
1150 - that certain extensions fit the associated purpose (if one has
1154 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
1156 *) Avoid a race condition when CRLs are checked in a multi threaded
1157 environment. This would happen due to the reordering of the revoked
1158 entries during signature checking and serial number lookup. Now the
1159 encoding is cached and the serial number sort performed under a lock.
1160 Add new STACK function sk_is_sorted().
1163 *) Add Delta CRL to the extension code.
1166 *) Various fixes to s3_pkt.c so alerts are sent properly.
1167 [David Holmes <d.holmes@f5.com>]
1169 *) Reduce the chances of duplicate issuer name and serial numbers (in
1170 violation of RFC3280) using the OpenSSL certificate creation utilities.
1171 This is done by creating a random 64 bit value for the initial serial
1172 number when a serial number file is created or when a self signed
1173 certificate is created using 'openssl req -x509'. The initial serial
1174 number file is created using 'openssl x509 -next_serial' in CA.pl
1175 rather than being initialized to 1.
1178 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
1180 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
1181 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
1182 [Joe Orton, Steve Henson]
1184 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
1186 [Joe Orton, Steve Henson]
1188 *) Make it possible to have multiple active certificates with the same
1189 subject in the CA index file. This is done only if the keyword
1190 'unique_subject' is set to 'no' in the main CA section (default
1191 if 'CA_default') of the configuration file. The value is saved
1192 with the database itself in a separate index attribute file,
1193 named like the index file with '.attr' appended to the name.
1196 *) X509 verify fixes. Disable broken certificate workarounds when
1197 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
1198 keyUsage extension present. Don't accept CRLs with unhandled critical
1199 extensions: since verify currently doesn't process CRL extensions this
1200 rejects a CRL with *any* critical extensions. Add new verify error codes
1204 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
1205 A clarification of RFC2560 will require the use of OCTET STRINGs and
1206 some implementations cannot handle the current raw format. Since OpenSSL
1207 copies and compares OCSP nonces as opaque blobs without any attempt at
1208 parsing them this should not create any compatibility issues.
1211 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
1212 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
1213 this HMAC (and other) operations are several times slower than OpenSSL
1217 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
1218 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1220 *) Use the correct content when signing type "other".
1223 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
1225 *) Fix various bugs revealed by running the NISCC test suite:
1227 Stop out of bounds reads in the ASN1 code when presented with
1228 invalid tags (CVE-2003-0543 and CVE-2003-0544).
1230 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
1232 If verify callback ignores invalid public key errors don't try to check
1233 certificate signature with the NULL public key.
1237 *) New -ignore_err option in ocsp application to stop the server
1238 exiting on the first error in a request.
1241 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
1242 if the server requested one: as stated in TLS 1.0 and SSL 3.0
1246 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
1247 extra data after the compression methods not only for TLS 1.0
1248 but also for SSL 3.0 (as required by the specification).
1249 [Bodo Moeller; problem pointed out by Matthias Loepfe]
1251 *) Change X509_certificate_type() to mark the key as exported/exportable
1252 when it's 512 *bits* long, not 512 bytes.
1255 *) Change AES_cbc_encrypt() so it outputs exact multiple of
1256 blocks during encryption.
1259 *) Various fixes to base64 BIO and non blocking I/O. On write
1260 flushes were not handled properly if the BIO retried. On read
1261 data was not being buffered properly and had various logic bugs.
1262 This also affects blocking I/O when the data being decoded is a
1266 *) Various S/MIME bugfixes and compatibility changes:
1267 output correct application/pkcs7 MIME type if
1268 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
1269 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
1270 of files as .eml work). Correctly handle very long lines in MIME
1274 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
1276 *) Countermeasure against the Klima-Pokorny-Rosa extension of
1277 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
1278 a protocol version number mismatch like a decryption error
1279 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
1282 *) Turn on RSA blinding by default in the default implementation
1283 to avoid a timing attack. Applications that don't want it can call
1284 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
1285 They would be ill-advised to do so in most cases.
1286 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
1288 *) Change RSA blinding code so that it works when the PRNG is not
1289 seeded (in this case, the secret RSA exponent is abused as
1290 an unpredictable seed -- if it is not unpredictable, there
1291 is no point in blinding anyway). Make RSA blinding thread-safe
1292 by remembering the creator's thread ID in rsa->blinding and
1293 having all other threads use local one-time blinding factors
1294 (this requires more computation than sharing rsa->blinding, but
1295 avoids excessive locking; and if an RSA object is not shared
1296 between threads, blinding will still be very fast).
1299 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
1300 ENGINE as defaults for all supported algorithms irrespective of
1301 the 'flags' parameter. 'flags' is now honoured, so applications
1302 should make sure they are passing it correctly.
1305 *) Target "mingw" now allows native Windows code to be generated in
1306 the Cygwin environment as well as with the MinGW compiler.
1309 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
1311 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
1312 via timing by performing a MAC computation even if incorrrect
1313 block cipher padding has been found. This is a countermeasure
1314 against active attacks where the attacker has to distinguish
1315 between bad padding and a MAC verification error. (CVE-2003-0078)
1317 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
1318 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
1319 Martin Vuagnoux (EPFL, Ilion)]
1321 *) Make the no-err option work as intended. The intention with no-err
1322 is not to have the whole error stack handling routines removed from
1323 libcrypto, it's only intended to remove all the function name and
1324 reason texts, thereby removing some of the footprint that may not
1325 be interesting if those errors aren't displayed anyway.
1327 NOTE: it's still possible for any application or module to have it's
1328 own set of error texts inserted. The routines are there, just not
1329 used by default when no-err is given.
1332 *) Add support for FreeBSD on IA64.
1333 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
1335 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
1336 Kerberos function mit_des_cbc_cksum(). Before this change,
1337 the value returned by DES_cbc_cksum() was like the one from
1338 mit_des_cbc_cksum(), except the bytes were swapped.
1339 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
1341 *) Allow an application to disable the automatic SSL chain building.
1342 Before this a rather primitive chain build was always performed in
1343 ssl3_output_cert_chain(): an application had no way to send the
1344 correct chain if the automatic operation produced an incorrect result.
1346 Now the chain builder is disabled if either:
1348 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
1350 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
1352 The reasoning behind this is that an application would not want the
1353 auto chain building to take place if extra chain certificates are
1354 present and it might also want a means of sending no additional
1355 certificates (for example the chain has two certificates and the
1359 *) Add the possibility to build without the ENGINE framework.
1360 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1362 *) Under Win32 gmtime() can return NULL: check return value in
1363 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
1366 *) DSA routines: under certain error conditions uninitialized BN objects
1367 could be freed. Solution: make sure initialization is performed early
1368 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
1369 Nils Larsch <nla@trustcenter.de> via PR#459)
1372 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
1373 checked on reconnect on the client side, therefore session resumption
1374 could still fail with a "ssl session id is different" error. This
1375 behaviour is masked when SSL_OP_ALL is used due to
1376 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
1377 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1378 followup to PR #377.
1381 *) IA-32 assembler support enhancements: unified ELF targets, support
1382 for SCO/Caldera platforms, fix for Cygwin shared build.
1385 *) Add support for FreeBSD on sparc64. As a consequence, support for
1386 FreeBSD on non-x86 processors is separate from x86 processors on
1387 the config script, much like the NetBSD support.
1388 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
1390 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
1392 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
1395 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
1396 code (06) was taken as the first octet of the session ID and the last
1397 octet was ignored consequently. As a result SSLv2 client side session
1398 caching could not have worked due to the session ID mismatch between
1400 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1404 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
1405 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
1409 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
1410 seems that in spite of existing for more than a year, many application
1411 author have done nothing to provide the necessary callbacks, which
1412 means that this particular engine will not work properly anywhere.
1413 This is a very unfortunate situation which forces us, in the name
1414 of usability, to give the hw_ncipher.c a static lock, which is part
1416 NOTE: This is for the 0.9.7 series ONLY. This hack will never
1417 appear in 0.9.8 or later. We EXPECT application authors to have
1418 dealt properly with this when 0.9.8 is released (unless we actually
1419 make such changes in the libcrypto locking code that changes will
1420 have to be made anyway).
1423 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
1424 octets have been read, EOF or an error occurs. Without this change
1425 some truncated ASN1 structures will not produce an error.
1428 *) Disable Heimdal support, since it hasn't been fully implemented.
1429 Still give the possibility to force the use of Heimdal, but with
1430 warnings and a request that patches get sent to openssl-dev.
1433 *) Add the VC-CE target, introduce the WINCE sysname, and add
1434 INSTALL.WCE and appropriate conditionals to make it build.
1435 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1437 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
1438 cygssl-x.y.z.dll, where x, y and z are the major, minor and
1439 edit numbers of the version.
1440 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
1442 *) Introduce safe string copy and catenation functions
1443 (BUF_strlcpy() and BUF_strlcat()).
1444 [Ben Laurie (CHATS) and Richard Levitte]
1446 *) Avoid using fixed-size buffers for one-line DNs.
1447 [Ben Laurie (CHATS)]
1449 *) Add BUF_MEM_grow_clean() to avoid information leakage when
1450 resizing buffers containing secrets, and use where appropriate.
1451 [Ben Laurie (CHATS)]
1453 *) Avoid using fixed size buffers for configuration file location.
1454 [Ben Laurie (CHATS)]
1456 *) Avoid filename truncation for various CA files.
1457 [Ben Laurie (CHATS)]
1459 *) Use sizeof in preference to magic numbers.
1460 [Ben Laurie (CHATS)]
1462 *) Avoid filename truncation in cert requests.
1463 [Ben Laurie (CHATS)]
1465 *) Add assertions to check for (supposedly impossible) buffer
1467 [Ben Laurie (CHATS)]
1469 *) Don't cache truncated DNS entries in the local cache (this could
1470 potentially lead to a spoofing attack).
1471 [Ben Laurie (CHATS)]
1473 *) Fix various buffers to be large enough for hex/decimal
1474 representations in a platform independent manner.
1475 [Ben Laurie (CHATS)]
1477 *) Add CRYPTO_realloc_clean() to avoid information leakage when
1478 resizing buffers containing secrets, and use where appropriate.
1479 [Ben Laurie (CHATS)]
1481 *) Add BIO_indent() to avoid much slightly worrying code to do
1483 [Ben Laurie (CHATS)]
1485 *) Convert sprintf()/BIO_puts() to BIO_printf().
1486 [Ben Laurie (CHATS)]
1488 *) buffer_gets() could terminate with the buffer only half
1490 [Ben Laurie (CHATS)]
1492 *) Add assertions to prevent user-supplied crypto functions from
1493 overflowing internal buffers by having large block sizes, etc.
1494 [Ben Laurie (CHATS)]
1496 *) New OPENSSL_assert() macro (similar to assert(), but enabled
1498 [Ben Laurie (CHATS)]
1500 *) Eliminate unused copy of key in RC4.
1501 [Ben Laurie (CHATS)]
1503 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
1504 [Ben Laurie (CHATS)]
1506 *) Fix off-by-one error in EGD path.
1507 [Ben Laurie (CHATS)]
1509 *) If RANDFILE path is too long, ignore instead of truncating.
1510 [Ben Laurie (CHATS)]
1512 *) Eliminate unused and incorrectly sized X.509 structure
1514 [Ben Laurie (CHATS)]
1516 *) Eliminate unused and dangerous function knumber().
1517 [Ben Laurie (CHATS)]
1519 *) Eliminate unused and dangerous structure, KSSL_ERR.
1520 [Ben Laurie (CHATS)]
1522 *) Protect against overlong session ID context length in an encoded
1523 session object. Since these are local, this does not appear to be
1525 [Ben Laurie (CHATS)]
1527 *) Change from security patch (see 0.9.6e below) that did not affect
1528 the 0.9.6 release series:
1530 Remote buffer overflow in SSL3 protocol - an attacker could
1531 supply an oversized master key in Kerberos-enabled versions.
1533 [Ben Laurie (CHATS)]
1535 *) Change the SSL kerb5 codes to match RFC 2712.
1538 *) Make -nameopt work fully for req and add -reqopt switch.
1539 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
1541 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
1542 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
1544 *) Make sure tests can be performed even if the corresponding algorithms
1545 have been removed entirely. This was also the last step to make
1546 OpenSSL compilable with DJGPP under all reasonable conditions.
1547 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
1549 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
1550 to allow version independent disabling of normally unselected ciphers,
1551 which may be activated as a side-effect of selecting a single cipher.
1553 (E.g., cipher list string "RSA" enables ciphersuites that are left
1554 out of "ALL" because they do not provide symmetric encryption.
1555 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
1556 [Lutz Jaenicke, Bodo Moeller]
1558 *) Add appropriate support for separate platform-dependent build
1559 directories. The recommended way to make a platform-dependent
1560 build directory is the following (tested on Linux), maybe with
1563 # Place yourself outside of the OpenSSL source tree. In
1564 # this example, the environment variable OPENSSL_SOURCE
1565 # is assumed to contain the absolute OpenSSL source directory.
1566 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
1567 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
1568 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
1569 mkdir -p `dirname $F`
1570 ln -s $OPENSSL_SOURCE/$F $F
1573 To be absolutely sure not to disturb the source tree, a "make clean"
1574 is a good thing. If it isn't successfull, don't worry about it,
1575 it probably means the source directory is very clean.
1578 *) Make sure any ENGINE control commands make local copies of string
1579 pointers passed to them whenever necessary. Otherwise it is possible
1580 the caller may have overwritten (or deallocated) the original string
1581 data when a later ENGINE operation tries to use the stored values.
1582 [Götz Babin-Ebell <babinebell@trustcenter.de>]
1584 *) Improve diagnostics in file reading and command-line digests.
1585 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
1587 *) Add AES modes CFB and OFB to the object database. Correct an
1588 error in AES-CFB decryption.
1591 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
1592 allows existing EVP_CIPHER_CTX structures to be reused after
1593 calling EVP_*Final(). This behaviour is used by encryption
1594 BIOs and some applications. This has the side effect that
1595 applications must explicitly clean up cipher contexts with
1596 EVP_CIPHER_CTX_cleanup() or they will leak memory.
1599 *) Check the values of dna and dnb in bn_mul_recursive before calling
1600 bn_mul_comba (a non zero value means the a or b arrays do not contain
1601 n2 elements) and fallback to bn_mul_normal if either is not zero.
1604 *) Fix escaping of non-ASCII characters when using the -subj option
1605 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
1608 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
1609 form for "surname", serialNumber has no short form.
1610 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
1611 therefore remove "mail" short name for "internet 7".
1612 The OID for unique identifiers in X509 certificates is
1613 x500UniqueIdentifier, not uniqueIdentifier.
1614 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
1617 *) Add an "init" command to the ENGINE config module and auto initialize
1618 ENGINEs. Without any "init" command the ENGINE will be initialized
1619 after all ctrl commands have been executed on it. If init=1 the
1620 ENGINE is initailized at that point (ctrls before that point are run
1621 on the uninitialized ENGINE and after on the initialized one). If
1622 init=0 then the ENGINE will not be iniatialized at all.
1625 *) Fix the 'app_verify_callback' interface so that the user-defined
1626 argument is actually passed to the callback: In the
1627 SSL_CTX_set_cert_verify_callback() prototype, the callback
1628 declaration has been changed from
1631 int (*cb)(X509_STORE_CTX *,void *);
1632 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
1633 i=s->ctx->app_verify_callback(&ctx)
1634 has been changed into
1635 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
1637 To update applications using SSL_CTX_set_cert_verify_callback(),
1638 a dummy argument can be added to their callback functions.
1639 [D. K. Smetters <smetters@parc.xerox.com>]
1641 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
1642 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
1644 *) Add and OPENSSL_LOAD_CONF define which will cause
1645 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
1646 This allows older applications to transparently support certain
1647 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
1648 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
1649 load the config file and OPENSSL_add_all_algorithms_conf() which will
1650 always load it have also been added.
1653 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
1654 Adjust NIDs and EVP layer.
1655 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1657 *) Config modules support in openssl utility.
1659 Most commands now load modules from the config file,
1660 though in a few (such as version) this isn't done
1661 because it couldn't be used for anything.
1663 In the case of ca and req the config file used is
1664 the same as the utility itself: that is the -config
1665 command line option can be used to specify an
1669 *) Move default behaviour from OPENSSL_config(). If appname is NULL
1670 use "openssl_conf" if filename is NULL use default openssl config file.
1673 *) Add an argument to OPENSSL_config() to allow the use of an alternative
1674 config section name. Add a new flag to tolerate a missing config file
1675 and move code to CONF_modules_load_file().
1678 *) Support for crypto accelerator cards from Accelerated Encryption
1679 Processing, www.aep.ie. (Use engine 'aep')
1680 The support was copied from 0.9.6c [engine] and adapted/corrected
1681 to work with the new engine framework.
1682 [AEP Inc. and Richard Levitte]
1684 *) Support for SureWare crypto accelerator cards from Baltimore
1685 Technologies. (Use engine 'sureware')
1686 The support was copied from 0.9.6c [engine] and adapted
1687 to work with the new engine framework.
1690 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
1691 make the newer ENGINE framework commands for the CHIL engine work.
1692 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
1694 *) Make it possible to produce shared libraries on ReliantUNIX.
1695 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
1697 *) Add the configuration target debug-linux-ppro.
1698 Make 'openssl rsa' use the general key loading routines
1699 implemented in apps.c, and make those routines able to
1700 handle the key format FORMAT_NETSCAPE and the variant
1702 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1704 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
1705 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1707 *) Add -keyform to rsautl, and document -engine.
1708 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
1710 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
1711 BIO_R_NO_SUCH_FILE error code rather than the generic
1712 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
1715 *) Add new functions
1717 ERR_peek_last_error_line
1718 ERR_peek_last_error_line_data.
1719 These are similar to
1722 ERR_peek_error_line_data,
1723 but report on the latest error recorded rather than the first one
1724 still in the error queue.
1725 [Ben Laurie, Bodo Moeller]
1727 *) default_algorithms option in ENGINE config module. This allows things
1729 default_algorithms = ALL
1730 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
1733 *) Prelminary ENGINE config module.
1736 *) New experimental application configuration code.
1739 *) Change the AES code to follow the same name structure as all other
1740 symmetric ciphers, and behave the same way. Move everything to
1741 the directory crypto/aes, thereby obsoleting crypto/rijndael.
1742 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1744 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
1745 [Ben Laurie and Theo de Raadt]
1747 *) Add option to output public keys in req command.
1748 [Massimiliano Pala madwolf@openca.org]
1750 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
1751 (up to about 10% better than before for P-192 and P-224).
1754 *) New functions/macros
1756 SSL_CTX_set_msg_callback(ctx, cb)
1757 SSL_CTX_set_msg_callback_arg(ctx, arg)
1758 SSL_set_msg_callback(ssl, cb)
1759 SSL_set_msg_callback_arg(ssl, arg)
1761 to request calling a callback function
1763 void cb(int write_p, int version, int content_type,
1764 const void *buf, size_t len, SSL *ssl, void *arg)
1766 whenever a protocol message has been completely received
1767 (write_p == 0) or sent (write_p == 1). Here 'version' is the
1768 protocol version according to which the SSL library interprets
1769 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
1770 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
1771 the content type as defined in the SSL 3.0/TLS 1.0 protocol
1772 specification (change_cipher_spec(20), alert(21), handshake(22)).
1773 'buf' and 'len' point to the actual message, 'ssl' to the
1774 SSL object, and 'arg' is the application-defined value set by
1775 SSL[_CTX]_set_msg_callback_arg().
1777 'openssl s_client' and 'openssl s_server' have new '-msg' options
1778 to enable a callback that displays all protocol messages.
1781 *) Change the shared library support so shared libraries are built as
1782 soon as the corresponding static library is finished, and thereby get
1783 openssl and the test programs linked against the shared library.
1784 This still only happens when the keyword "shard" has been given to
1785 the configuration scripts.
1787 NOTE: shared library support is still an experimental thing, and
1788 backward binary compatibility is still not guaranteed.
1789 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
1791 *) Add support for Subject Information Access extension.
1792 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1794 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
1795 additional bytes when new memory had to be allocated, not just
1796 when reusing an existing buffer.
1799 *) New command line and configuration option 'utf8' for the req command.
1800 This allows field values to be specified as UTF8 strings.
1803 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
1804 runs for the former and machine-readable output for the latter.
1807 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
1808 of the e-mail address in the DN (i.e., it will go into a certificate
1809 extension only). The new configuration file option 'email_in_dn = no'
1810 has the same effect.
1811 [Massimiliano Pala madwolf@openca.org]
1813 *) Change all functions with names starting with des_ to be starting
1814 with DES_ instead. Add wrappers that are compatible with libdes,
1815 but are named _ossl_old_des_*. Finally, add macros that map the
1816 des_* symbols to the corresponding _ossl_old_des_* if libdes
1817 compatibility is desired. If OpenSSL 0.9.6c compatibility is
1818 desired, the des_* symbols will be mapped to DES_*, with one
1821 Since we provide two compatibility mappings, the user needs to
1822 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
1823 compatibility is desired. The default (i.e., when that macro
1824 isn't defined) is OpenSSL 0.9.6c compatibility.
1826 There are also macros that enable and disable the support of old
1827 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
1828 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
1829 are defined, the default will apply: to support the old des routines.
1831 In either case, one must include openssl/des.h to get the correct
1832 definitions. Do not try to just include openssl/des_old.h, that
1835 NOTE: This is a major break of an old API into a new one. Software
1836 authors are encouraged to switch to the DES_ style functions. Some
1837 time in the future, des_old.h and the libdes compatibility functions
1838 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
1839 default), and then completely removed.
1842 *) Test for certificates which contain unsupported critical extensions.
1843 If such a certificate is found during a verify operation it is
1844 rejected by default: this behaviour can be overridden by either
1845 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
1846 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
1847 X509_supported_extension() has also been added which returns 1 if a
1848 particular extension is supported.
1851 *) Modify the behaviour of EVP cipher functions in similar way to digests
1852 to retain compatibility with existing code.
1855 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
1856 compatibility with existing code. In particular the 'ctx' parameter does
1857 not have to be to be initialized before the call to EVP_DigestInit() and
1858 it is tidied up after a call to EVP_DigestFinal(). New function
1859 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
1860 EVP_MD_CTX_copy() changed to not require the destination to be
1861 initialized valid and new function EVP_MD_CTX_copy_ex() added which
1862 requires the destination to be valid.
1864 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
1865 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
1868 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
1869 so that complete 'Handshake' protocol structures are kept in memory
1870 instead of overwriting 'msg_type' and 'length' with 'body' data.
1873 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
1874 [Massimo Santin via Richard Levitte]
1876 *) Major restructuring to the underlying ENGINE code. This includes
1877 reduction of linker bloat, separation of pure "ENGINE" manipulation
1878 (initialisation, etc) from functionality dealing with implementations
1879 of specific crypto iterfaces. This change also introduces integrated
1880 support for symmetric ciphers and digest implementations - so ENGINEs
1881 can now accelerate these by providing EVP_CIPHER and EVP_MD
1882 implementations of their own. This is detailed in crypto/engine/README
1883 as it couldn't be adequately described here. However, there are a few
1884 API changes worth noting - some RSA, DSA, DH, and RAND functions that
1885 were changed in the original introduction of ENGINE code have now
1886 reverted back - the hooking from this code to ENGINE is now a good
1887 deal more passive and at run-time, operations deal directly with
1888 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
1889 dereferencing through an ENGINE pointer any more. Also, the ENGINE
1890 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
1891 they were not being used by the framework as there is no concept of a
1892 BIGNUM_METHOD and they could not be generalised to the new
1893 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
1894 ENGINE_cpy() has been removed as it cannot be consistently defined in
1898 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
1901 *) Change mkdef.pl to sort symbols that get the same entry number,
1902 and make sure the automatically generated functions ERR_load_*
1903 become part of libeay.num as well.
1906 *) New function SSL_renegotiate_pending(). This returns true once
1907 renegotiation has been requested (either SSL_renegotiate() call
1908 or HelloRequest/ClientHello receveived from the peer) and becomes
1909 false once a handshake has been completed.
1910 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
1911 sends a HelloRequest, but does not ensure that a handshake takes
1912 place. SSL_renegotiate_pending() is useful for checking if the
1913 client has followed the request.)
1916 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
1917 By default, clients may request session resumption even during
1918 renegotiation (if session ID contexts permit); with this option,
1919 session resumption is possible only in the first handshake.
1921 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
1922 more bits available for options that should not be part of
1923 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
1926 *) Add some demos for certificate and certificate request creation.
1929 *) Make maximum certificate chain size accepted from the peer application
1930 settable (SSL*_get/set_max_cert_list()), as proposed by
1931 "Douglas E. Engert" <deengert@anl.gov>.
1934 *) Add support for shared libraries for Unixware-7
1935 (Boyd Lynn Gerber <gerberb@zenez.com>).
1938 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
1939 be done prior to destruction. Use this to unload error strings from
1940 ENGINEs that load their own error strings. NB: This adds two new API
1941 functions to "get" and "set" this destroy handler in an ENGINE.
1944 *) Alter all existing ENGINE implementations (except "openssl" and
1945 "openbsd") to dynamically instantiate their own error strings. This
1946 makes them more flexible to be built both as statically-linked ENGINEs
1947 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
1948 Also, add stub code to each that makes building them as self-contained
1949 shared-libraries easier (see README.ENGINE).
1952 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
1953 implementations into applications that are completely implemented in
1954 self-contained shared-libraries. The "dynamic" ENGINE exposes control
1955 commands that can be used to configure what shared-library to load and
1956 to control aspects of the way it is handled. Also, made an update to
1957 the README.ENGINE file that brings its information up-to-date and
1958 provides some information and instructions on the "dynamic" ENGINE
1959 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
1962 *) Make it possible to unload ranges of ERR strings with a new
1963 "ERR_unload_strings" function.
1966 *) Add a copy() function to EVP_MD.
1969 *) Make EVP_MD routines take a context pointer instead of just the
1970 md_data void pointer.
1973 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
1974 that the digest can only process a single chunk of data
1975 (typically because it is provided by a piece of
1976 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
1977 is only going to provide a single chunk of data, and hence the
1978 framework needn't accumulate the data for oneshot drivers.
1981 *) As with "ERR", make it possible to replace the underlying "ex_data"
1982 functions. This change also alters the storage and management of global
1983 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
1984 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
1985 index counters. The API functions that use this state have been changed
1986 to take a "class_index" rather than pointers to the class's local STACK
1987 and counter, and there is now an API function to dynamically create new
1988 classes. This centralisation allows us to (a) plug a lot of the
1989 thread-safety problems that existed, and (b) makes it possible to clean
1990 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
1991 such data would previously have always leaked in application code and
1992 workarounds were in place to make the memory debugging turn a blind eye
1993 to it. Application code that doesn't use this new function will still
1994 leak as before, but their memory debugging output will announce it now
1995 rather than letting it slide.
1997 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
1998 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
1999 has a return value to indicate success or failure.
2002 *) Make it possible to replace the underlying "ERR" functions such that the
2003 global state (2 LHASH tables and 2 locks) is only used by the "default"
2004 implementation. This change also adds two functions to "get" and "set"
2005 the implementation prior to it being automatically set the first time
2006 any other ERR function takes place. Ie. an application can call "get",
2007 pass the return value to a module it has just loaded, and that module
2008 can call its own "set" function using that value. This means the
2009 module's "ERR" operations will use (and modify) the error state in the
2010 application and not in its own statically linked copy of OpenSSL code.
2013 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
2014 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
2015 the operation, and provides a more encapsulated way for external code
2016 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
2017 to use these functions rather than manually incrementing the counts.
2019 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
2022 *) Add EVP test program.
2025 *) Add symmetric cipher support to ENGINE. Expect the API to change!
2028 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
2029 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
2030 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
2031 These allow a CRL to be built without having to access X509_CRL fields
2032 directly. Modify 'ca' application to use new functions.
2035 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
2036 bug workarounds. Rollback attack detection is a security feature.
2037 The problem will only arise on OpenSSL servers when TLSv1 is not
2038 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
2039 Software authors not wanting to support TLSv1 will have special reasons
2040 for their choice and can explicitly enable this option.
2041 [Bodo Moeller, Lutz Jaenicke]
2043 *) Rationalise EVP so it can be extended: don't include a union of
2044 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
2045 (similar to those existing for EVP_CIPHER_CTX).
2050 EVP_MD_CTX_init(&md); /* new function call */
2051 EVP_DigestInit(&md, EVP_sha1());
2052 EVP_DigestUpdate(&md, in, len);
2053 EVP_DigestFinal(&md, out, NULL);
2054 EVP_MD_CTX_cleanup(&md); /* new function call */
2058 *) Make DES key schedule conform to the usual scheme, as well as
2059 correcting its structure. This means that calls to DES functions
2060 now have to pass a pointer to a des_key_schedule instead of a
2061 plain des_key_schedule (which was actually always a pointer
2064 des_key_schedule ks;
2066 des_set_key_checked(..., &ks);
2067 des_ncbc_encrypt(..., &ks, ...);
2069 (Note that a later change renames 'des_...' into 'DES_...'.)
2072 *) Initial reduction of linker bloat: the use of some functions, such as
2073 PEM causes large amounts of unused functions to be linked in due to
2074 poor organisation. For example pem_all.c contains every PEM function
2075 which has a knock on effect of linking in large amounts of (unused)
2076 ASN1 code. Grouping together similar functions and splitting unrelated
2077 functions prevents this.
2080 *) Cleanup of EVP macros.
2083 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
2084 correct _ecb suffix.
2087 *) Add initial OCSP responder support to ocsp application. The
2088 revocation information is handled using the text based index
2089 use by the ca application. The responder can either handle
2090 requests generated internally, supplied in files (for example
2091 via a CGI script) or using an internal minimal server.
2094 *) Add configuration choices to get zlib compression for TLS.
2097 *) Changes to Kerberos SSL for RFC 2712 compliance:
2098 1. Implemented real KerberosWrapper, instead of just using
2099 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
2100 2. Implemented optional authenticator field of KerberosWrapper.
2102 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
2103 and authenticator structs; see crypto/krb5/.
2105 Generalized Kerberos calls to support multiple Kerberos libraries.
2106 [Vern Staats <staatsvr@asc.hpc.mil>,
2107 Jeffrey Altman <jaltman@columbia.edu>
2108 via Richard Levitte]
2110 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
2111 already does with RSA. testdsa.h now has 'priv_key/pub_key'
2112 values for each of the key sizes rather than having just
2113 parameters (and 'speed' generating keys each time).
2116 *) Speed up EVP routines.
2119 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
2120 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
2121 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
2122 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
2124 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
2125 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
2126 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
2129 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
2131 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
2134 *) Added the OS2-EMX target.
2135 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
2137 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
2138 to support NCONF routines in extension code. New function CONF_set_nconf()
2139 to allow functions which take an NCONF to also handle the old LHASH
2140 structure: this means that the old CONF compatible routines can be
2141 retained (in particular wrt extensions) without having to duplicate the
2142 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
2145 *) Enhance the general user interface with mechanisms for inner control
2146 and with possibilities to have yes/no kind of prompts.
2149 *) Change all calls to low level digest routines in the library and
2150 applications to use EVP. Add missing calls to HMAC_cleanup() and
2151 don't assume HMAC_CTX can be copied using memcpy().
2152 [Verdon Walker <VWalker@novell.com>, Steve Henson]
2154 *) Add the possibility to control engines through control names but with
2155 arbitrary arguments instead of just a string.
2156 Change the key loaders to take a UI_METHOD instead of a callback
2157 function pointer. NOTE: this breaks binary compatibility with earlier
2158 versions of OpenSSL [engine].
2159 Adapt the nCipher code for these new conditions and add a card insertion
2163 *) Enhance the general user interface with mechanisms to better support
2164 dialog box interfaces, application-defined prompts, the possibility
2165 to use defaults (for example default passwords from somewhere else)
2166 and interrupts/cancellations.
2169 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
2170 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
2173 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
2174 tidy up some unnecessarily weird code in 'sk_new()').
2175 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
2177 *) Change the key loading routines for ENGINEs to use the same kind
2178 callback (pem_password_cb) as all other routines that need this
2182 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
2183 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
2184 than this minimum value is recommended.
2187 *) New random seeder for OpenVMS, using the system process statistics
2188 that are easily reachable.
2191 *) Windows apparently can't transparently handle global
2192 variables defined in DLLs. Initialisations such as:
2194 const ASN1_ITEM *it = &ASN1_INTEGER_it;
2196 wont compile. This is used by the any applications that need to
2197 declare their own ASN1 modules. This was fixed by adding the option
2198 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
2199 needed for static libraries under Win32.
2202 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
2203 setting of purpose and trust fields. New X509_STORE trust and
2204 purpose functions and tidy up setting in other SSL functions.
2207 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
2208 structure. These are inherited by X509_STORE_CTX when it is
2209 initialised. This allows various defaults to be set in the
2210 X509_STORE structure (such as flags for CRL checking and custom
2211 purpose or trust settings) for functions which only use X509_STORE_CTX
2212 internally such as S/MIME.
2214 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
2215 trust settings if they are not set in X509_STORE. This allows X509_STORE
2216 purposes and trust (in S/MIME for example) to override any set by default.
2218 Add command line options for CRL checking to smime, s_client and s_server
2222 *) Initial CRL based revocation checking. If the CRL checking flag(s)
2223 are set then the CRL is looked up in the X509_STORE structure and
2224 its validity and signature checked, then if the certificate is found
2225 in the CRL the verify fails with a revoked error.
2227 Various new CRL related callbacks added to X509_STORE_CTX structure.
2229 Command line options added to 'verify' application to support this.
2231 This needs some additional work, such as being able to handle multiple
2232 CRLs with different times, extension based lookup (rather than just
2233 by subject name) and ultimately more complete V2 CRL extension
2237 *) Add a general user interface API (crypto/ui/). This is designed
2238 to replace things like des_read_password and friends (backward
2239 compatibility functions using this new API are provided).
2240 The purpose is to remove prompting functions from the DES code
2241 section as well as provide for prompting through dialog boxes in
2242 a window system and the like.
2245 *) Add "ex_data" support to ENGINE so implementations can add state at a
2246 per-structure level rather than having to store it globally.
2249 *) Make it possible for ENGINE structures to be copied when retrieved by
2250 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
2251 This causes the "original" ENGINE structure to act like a template,
2252 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
2253 operational state can be localised to each ENGINE structure, despite the
2254 fact they all share the same "methods". New ENGINE structures returned in
2255 this case have no functional references and the return value is the single
2256 structural reference. This matches the single structural reference returned
2257 by ENGINE_by_id() normally, when it is incremented on the pre-existing
2261 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
2262 needs to match any other type at all we need to manually clear the
2266 *) Changes to the "openssl engine" utility to include;
2267 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
2268 about an ENGINE's available control commands.
2269 - executing control commands from command line arguments using the
2270 '-pre' and '-post' switches. '-post' is only used if '-t' is
2271 specified and the ENGINE is successfully initialised. The syntax for
2272 the individual commands are colon-separated, for example;
2273 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
2276 *) New dynamic control command support for ENGINEs. ENGINEs can now
2277 declare their own commands (numbers), names (strings), descriptions,
2278 and input types for run-time discovery by calling applications. A
2279 subset of these commands are implicitly classed as "executable"
2280 depending on their input type, and only these can be invoked through
2281 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
2282 can be based on user input, config files, etc). The distinction is
2283 that "executable" commands cannot return anything other than a boolean
2284 result and can only support numeric or string input, whereas some
2285 discoverable commands may only be for direct use through
2286 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
2287 pointers, or other custom uses. The "executable" commands are to
2288 support parameterisations of ENGINE behaviour that can be
2289 unambiguously defined by ENGINEs and used consistently across any
2290 OpenSSL-based application. Commands have been added to all the
2291 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
2292 control over shared-library paths without source code alterations.
2295 *) Changed all ENGINE implementations to dynamically allocate their
2296 ENGINEs rather than declaring them statically. Apart from this being
2297 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
2298 this also allows the implementations to compile without using the
2299 internal engine_int.h header.
2302 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
2303 'const' value. Any code that should be able to modify a RAND_METHOD
2304 should already have non-const pointers to it (ie. they should only
2305 modify their own ones).
2308 *) Made a variety of little tweaks to the ENGINE code.
2309 - "atalla" and "ubsec" string definitions were moved from header files
2310 to C code. "nuron" string definitions were placed in variables
2311 rather than hard-coded - allowing parameterisation of these values
2312 later on via ctrl() commands.
2313 - Removed unused "#if 0"'d code.
2314 - Fixed engine list iteration code so it uses ENGINE_free() to release
2315 structural references.
2316 - Constified the RAND_METHOD element of ENGINE structures.
2317 - Constified various get/set functions as appropriate and added
2318 missing functions (including a catch-all ENGINE_cpy that duplicates
2319 all ENGINE values onto a new ENGINE except reference counts/state).
2320 - Removed NULL parameter checks in get/set functions. Setting a method
2321 or function to NULL is a way of cancelling out a previously set
2322 value. Passing a NULL ENGINE parameter is just plain stupid anyway
2323 and doesn't justify the extra error symbols and code.
2324 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
2325 flags from engine_int.h to engine.h.
2326 - Changed prototypes for ENGINE handler functions (init(), finish(),
2327 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
2330 *) Implement binary inversion algorithm for BN_mod_inverse in addition
2331 to the algorithm using long division. The binary algorithm can be
2332 used only if the modulus is odd. On 32-bit systems, it is faster
2333 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
2334 roughly 5-15% for 256-bit moduli), so we use it only for moduli
2335 up to 450 bits. In 64-bit environments, the binary algorithm
2336 appears to be advantageous for much longer moduli; here we use it
2337 for moduli up to 2048 bits.
2340 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
2341 could not support the combine flag in choice fields.
2344 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
2345 extensions from a certificate request to the certificate.
2348 *) Allow multiple 'certopt' and 'nameopt' options to be separated
2349 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
2350 file: this allows the display of the certificate about to be
2351 signed to be customised, to allow certain fields to be included
2352 or excluded and extension details. The old system didn't display
2353 multicharacter strings properly, omitted fields not in the policy
2354 and couldn't display additional details such as extensions.
2357 *) Function EC_POINTs_mul for multiple scalar multiplication
2358 of an arbitrary number of elliptic curve points
2359 \sum scalars[i]*points[i],
2360 optionally including the generator defined for the EC_GROUP:
2361 scalar*generator + \sum scalars[i]*points[i].
2363 EC_POINT_mul is a simple wrapper function for the typical case
2364 that the point list has just one item (besides the optional
2368 *) First EC_METHODs for curves over GF(p):
2370 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
2371 operations and provides various method functions that can also
2372 operate with faster implementations of modular arithmetic.
2374 EC_GFp_mont_method() reuses most functions that are part of
2375 EC_GFp_simple_method, but uses Montgomery arithmetic.
2377 [Bodo Moeller; point addition and point doubling
2378 implementation directly derived from source code provided by
2379 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
2381 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
2382 crypto/ec/ec_lib.c):
2384 Curves are EC_GROUP objects (with an optional group generator)
2385 based on EC_METHODs that are built into the library.
2387 Points are EC_POINT objects based on EC_GROUP objects.
2389 Most of the framework would be able to handle curves over arbitrary
2390 finite fields, but as there are no obvious types for fields other
2391 than GF(p), some functions are limited to that for now.
2394 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
2395 that the file contains a complete HTTP response.
2398 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
2399 change the def and num file printf format specifier from "%-40sXXX"
2400 to "%-39s XXX". The latter will always guarantee a space after the
2401 field while the former will cause them to run together if the field
2402 is 40 of more characters long.
2405 *) Constify the cipher and digest 'method' functions and structures
2406 and modify related functions to take constant EVP_MD and EVP_CIPHER
2410 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
2411 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
2414 *) Modify EVP_Digest*() routines so they now return values. Although the
2415 internal software routines can never fail additional hardware versions
2419 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
2421 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
2422 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
2425 ERR_R_NESTED_ASN1_ERROR
2427 ERR_R_MISSING_ASN1_EOS
2428 were 4 .. 9, conflicting with
2429 ERR_LIB_RSA (= ERR_R_RSA_LIB)
2431 ERR_LIB_PEM (= ERR_R_PEM_LIB).
2432 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
2434 Add new error code 'ERR_R_INTERNAL_ERROR'.
2437 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
2441 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
2442 sets the subject name for a new request or supersedes the
2443 subject name in a given request. Formats that can be parsed are
2444 'CN=Some Name, OU=myOU, C=IT'
2446 'CN=Some Name/OU=myOU/C=IT'.
2448 Add options '-batch' and '-verbose' to 'openssl req'.
2449 [Massimiliano Pala <madwolf@hackmasters.net>]
2451 *) Introduce the possibility to access global variables through
2452 functions on platform were that's the best way to handle exporting
2453 global variables in shared libraries. To enable this functionality,
2454 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
2455 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
2456 is normally done by Configure or something similar).
2458 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
2459 in the source file (foo.c) like this:
2461 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
2462 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
2464 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
2465 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
2467 OPENSSL_DECLARE_GLOBAL(int,foo);
2468 #define foo OPENSSL_GLOBAL_REF(foo)
2469 OPENSSL_DECLARE_GLOBAL(double,bar);
2470 #define bar OPENSSL_GLOBAL_REF(bar)
2472 The #defines are very important, and therefore so is including the
2473 header file everywhere where the defined globals are used.
2475 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
2476 of ASN.1 items, but that structure is a bit different.
2478 The largest change is in util/mkdef.pl which has been enhanced with
2479 better and easier to understand logic to choose which symbols should
2480 go into the Windows .def files as well as a number of fixes and code
2481 cleanup (among others, algorithm keywords are now sorted
2482 lexicographically to avoid constant rewrites).
2485 *) In BN_div() keep a copy of the sign of 'num' before writing the
2486 result to 'rm' because if rm==num the value will be overwritten
2487 and produce the wrong result if 'num' is negative: this caused
2488 problems with BN_mod() and BN_nnmod().
2491 *) Function OCSP_request_verify(). This checks the signature on an
2492 OCSP request and verifies the signer certificate. The signer
2493 certificate is just checked for a generic purpose and OCSP request
2497 *) Add OCSP_check_validity() function to check the validity of OCSP
2498 responses. OCSP responses are prepared in real time and may only
2499 be a few seconds old. Simply checking that the current time lies
2500 between thisUpdate and nextUpdate max reject otherwise valid responses
2501 caused by either OCSP responder or client clock inaccuracy. Instead
2502 we allow thisUpdate and nextUpdate to fall within a certain period of
2503 the current time. The age of the response can also optionally be
2504 checked. Two new options -validity_period and -status_age added to
2508 *) If signature or public key algorithm is unrecognized print out its
2509 OID rather that just UNKNOWN.
2512 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
2513 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
2514 ID to be generated from the issuer certificate alone which can then be
2515 passed to OCSP_id_issuer_cmp().
2518 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
2519 ASN1 modules to export functions returning ASN1_ITEM pointers
2520 instead of the ASN1_ITEM structures themselves. This adds several
2521 new macros which allow the underlying ASN1 function/structure to
2522 be accessed transparently. As a result code should not use ASN1_ITEM
2523 references directly (such as &X509_it) but instead use the relevant
2524 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
2525 use of the new ASN1 code on platforms where exporting structures
2526 is problematical (for example in shared libraries) but exporting
2527 functions returning pointers to structures is not.
2530 *) Add support for overriding the generation of SSL/TLS session IDs.
2531 These callbacks can be registered either in an SSL_CTX or per SSL.
2532 The purpose of this is to allow applications to control, if they wish,
2533 the arbitrary values chosen for use as session IDs, particularly as it
2534 can be useful for session caching in multiple-server environments. A
2535 command-line switch for testing this (and any client code that wishes
2536 to use such a feature) has been added to "s_server".
2537 [Geoff Thorpe, Lutz Jaenicke]
2539 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
2540 of the form '#if defined(...) || defined(...) || ...' and
2541 '#if !defined(...) && !defined(...) && ...'. This also avoids
2542 the growing number of special cases it was previously handling.
2545 *) Make all configuration macros available for application by making
2546 sure they are available in opensslconf.h, by giving them names starting
2547 with "OPENSSL_" to avoid conflicts with other packages and by making
2548 sure e_os2.h will cover all platform-specific cases together with
2550 Additionally, it is now possible to define configuration/platform-
2551 specific names (called "system identities"). In the C code, these
2552 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
2553 macro with the name beginning with "OPENSSL_SYS_", which is determined
2554 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
2558 *) New option -set_serial to 'req' and 'x509' this allows the serial
2559 number to use to be specified on the command line. Previously self
2560 signed certificates were hard coded with serial number 0 and the
2561 CA options of 'x509' had to use a serial number in a file which was
2565 *) New options to 'ca' utility to support V2 CRL entry extensions.
2566 Currently CRL reason, invalidity date and hold instruction are
2567 supported. Add new CRL extensions to V3 code and some new objects.
2570 *) New function EVP_CIPHER_CTX_set_padding() this is used to
2571 disable standard block padding (aka PKCS#5 padding) in the EVP
2572 API, which was previously mandatory. This means that the data is
2573 not padded in any way and so the total length much be a multiple
2574 of the block size, otherwise an error occurs.
2577 *) Initial (incomplete) OCSP SSL support.
2580 *) New function OCSP_parse_url(). This splits up a URL into its host,
2581 port and path components: primarily to parse OCSP URLs. New -url
2582 option to ocsp utility.
2585 *) New nonce behavior. The return value of OCSP_check_nonce() now
2586 reflects the various checks performed. Applications can decide
2587 whether to tolerate certain situations such as an absent nonce
2588 in a response when one was present in a request: the ocsp application
2589 just prints out a warning. New function OCSP_add1_basic_nonce()
2590 this is to allow responders to include a nonce in a response even if
2591 the request is nonce-less.
2594 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
2595 skipped when using openssl x509 multiple times on a single input file,
2596 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
2599 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
2600 set string type: to handle setting ASN1_TIME structures. Fix ca
2601 utility to correctly initialize revocation date of CRLs.
2604 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
2605 the clients preferred ciphersuites and rather use its own preferences.
2606 Should help to work around M$ SGC (Server Gated Cryptography) bug in
2607 Internet Explorer by ensuring unchanged hash method during stepup.
2608 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
2611 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
2612 to aes and add a new 'exist' option to print out symbols that don't
2616 *) Additional options to ocsp utility to allow flags to be set and
2617 additional certificates supplied.
2620 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
2621 OCSP client a number of certificate to only verify the response
2625 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
2626 handle the new API. Currently only ECB, CBC modes supported. Add new
2629 Add TLS AES ciphersuites as described in RFC3268, "Advanced
2630 Encryption Standard (AES) Ciphersuites for Transport Layer
2631 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
2632 not enabled by default and were not part of the "ALL" ciphersuite
2633 alias because they were not yet official; they could be
2634 explicitly requested by specifying the "AESdraft" ciphersuite
2635 group alias. In the final release of OpenSSL 0.9.7, the group
2636 alias is called "AES" and is part of "ALL".)
2637 [Ben Laurie, Steve Henson, Bodo Moeller]
2639 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
2640 request to response.
2643 *) Functions for OCSP responders. OCSP_request_onereq_count(),
2644 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
2645 extract information from a certificate request. OCSP_response_create()
2646 creates a response and optionally adds a basic response structure.
2647 OCSP_basic_add1_status() adds a complete single response to a basic
2648 response and returns the OCSP_SINGLERESP structure just added (to allow
2649 extensions to be included for example). OCSP_basic_add1_cert() adds a
2650 certificate to a basic response and OCSP_basic_sign() signs a basic
2651 response with various flags. New helper functions ASN1_TIME_check()
2652 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
2653 (converts ASN1_TIME to GeneralizedTime).
2656 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
2657 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
2658 structure from a certificate. X509_pubkey_digest() digests the public_key
2659 contents: this is used in various key identifiers.
2662 *) Make sk_sort() tolerate a NULL argument.
2663 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
2665 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
2666 passed by the function are trusted implicitly. If any of them signed the
2667 response then it is assumed to be valid and is not verified.
2670 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
2671 to data. This was previously part of the PKCS7 ASN1 code. This
2672 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
2673 [Steve Henson, reported by Kenneth R. Robinette
2674 <support@securenetterm.com>]
2676 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
2677 routines: without these tracing memory leaks is very painful.
2678 Fix leaks in PKCS12 and PKCS7 routines.
2681 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
2682 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
2683 effectively meant GeneralizedTime would never be used. Now it
2684 is initialised to -1 but X509_time_adj() now has to check the value
2685 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
2686 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
2687 [Steve Henson, reported by Kenneth R. Robinette
2688 <support@securenetterm.com>]
2690 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
2691 result in a zero length in the ASN1_INTEGER structure which was
2692 not consistent with the structure when d2i_ASN1_INTEGER() was used
2693 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
2694 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
2695 where it did not print out a minus for negative ASN1_INTEGER.
2698 *) Add summary printout to ocsp utility. The various functions which
2699 convert status values to strings have been renamed to:
2700 OCSP_response_status_str(), OCSP_cert_status_str() and
2701 OCSP_crl_reason_str() and are no longer static. New options
2702 to verify nonce values and to disable verification. OCSP response
2703 printout format cleaned up.
2706 *) Add additional OCSP certificate checks. These are those specified
2707 in RFC2560. This consists of two separate checks: the CA of the
2708 certificate being checked must either be the OCSP signer certificate
2709 or the issuer of the OCSP signer certificate. In the latter case the
2710 OCSP signer certificate must contain the OCSP signing extended key
2711 usage. This check is performed by attempting to match the OCSP
2712 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
2713 in the OCSP_CERTID structures of the response.
2716 *) Initial OCSP certificate verification added to OCSP_basic_verify()
2717 and related routines. This uses the standard OpenSSL certificate
2718 verify routines to perform initial checks (just CA validity) and
2719 to obtain the certificate chain. Then additional checks will be
2720 performed on the chain. Currently the root CA is checked to see
2721 if it is explicitly trusted for OCSP signing. This is used to set
2722 a root CA as a global signing root: that is any certificate that
2723 chains to that CA is an acceptable OCSP signing certificate.
2726 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
2727 extensions from a separate configuration file.
2728 As when reading extensions from the main configuration file,
2729 the '-extensions ...' option may be used for specifying the
2731 [Massimiliano Pala <madwolf@comune.modena.it>]
2733 *) New OCSP utility. Allows OCSP requests to be generated or
2734 read. The request can be sent to a responder and the output
2735 parsed, outputed or printed in text form. Not complete yet:
2736 still needs to check the OCSP response validity.
2739 *) New subcommands for 'openssl ca':
2740 'openssl ca -status <serial>' prints the status of the cert with
2741 the given serial number (according to the index file).
2742 'openssl ca -updatedb' updates the expiry status of certificates
2744 [Massimiliano Pala <madwolf@comune.modena.it>]
2746 *) New '-newreq-nodes' command option to CA.pl. This is like
2747 '-newreq', but calls 'openssl req' with the '-nodes' option
2748 so that the resulting key is not encrypted.
2749 [Damien Miller <djm@mindrot.org>]
2751 *) New configuration for the GNU Hurd.
2752 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
2754 *) Initial code to implement OCSP basic response verify. This
2755 is currently incomplete. Currently just finds the signer's
2756 certificate and verifies the signature on the response.
2759 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
2760 value of OPENSSLDIR. This is available via the new '-d' option
2761 to 'openssl version', and is also included in 'openssl version -a'.
2764 *) Allowing defining memory allocation callbacks that will be given
2765 file name and line number information in additional arguments
2766 (a const char* and an int). The basic functionality remains, as
2767 well as the original possibility to just replace malloc(),
2768 realloc() and free() by functions that do not know about these
2769 additional arguments. To register and find out the current
2770 settings for extended allocation functions, the following
2771 functions are provided:
2773 CRYPTO_set_mem_ex_functions
2774 CRYPTO_set_locked_mem_ex_functions
2775 CRYPTO_get_mem_ex_functions
2776 CRYPTO_get_locked_mem_ex_functions
2778 These work the same way as CRYPTO_set_mem_functions and friends.
2779 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
2780 extended allocation function is enabled.
2781 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
2782 a conventional allocation function is enabled.
2783 [Richard Levitte, Bodo Moeller]
2785 *) Finish off removing the remaining LHASH function pointer casts.
2786 There should no longer be any prototype-casting required when using
2787 the LHASH abstraction, and any casts that remain are "bugs". See
2788 the callback types and macros at the head of lhash.h for details
2789 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
2792 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
2793 If /dev/[u]random devices are not available or do not return enough
2794 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
2796 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
2797 /etc/entropy will be queried once each in this sequence, quering stops
2798 when enough entropy was collected without querying more sockets.
2801 *) Change the Unix RAND_poll() variant to be able to poll several
2802 random devices, as specified by DEVRANDOM, until a sufficient amount
2803 of data has been collected. We spend at most 10 ms on each file
2804 (select timeout) and read in non-blocking mode. DEVRANDOM now
2805 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
2806 (previously it was just the string "/dev/urandom"), so on typical
2807 platforms the 10 ms delay will never occur.
2808 Also separate out the Unix variant to its own file, rand_unix.c.
2809 For VMS, there's a currently-empty rand_vms.c.
2812 *) Move OCSP client related routines to ocsp_cl.c. These
2813 provide utility functions which an application needing
2814 to issue a request to an OCSP responder and analyse the
2815 response will typically need: as opposed to those which an
2816 OCSP responder itself would need which will be added later.
2818 OCSP_request_sign() signs an OCSP request with an API similar
2819 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
2820 response. OCSP_response_get1_basic() extracts basic response
2821 from response. OCSP_resp_find_status(): finds and extracts status
2822 information from an OCSP_CERTID structure (which will be created
2823 when the request structure is built). These are built from lower
2824 level functions which work on OCSP_SINGLERESP structures but
2825 wont normally be used unless the application wishes to examine
2826 extensions in the OCSP response for example.
2828 Replace nonce routines with a pair of functions.
2829 OCSP_request_add1_nonce() adds a nonce value and optionally
2830 generates a random value. OCSP_check_nonce() checks the
2831 validity of the nonce in an OCSP response.
2834 *) Change function OCSP_request_add() to OCSP_request_add0_id().
2835 This doesn't copy the supplied OCSP_CERTID and avoids the
2836 need to free up the newly created id. Change return type
2837 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
2838 This can then be used to add extensions to the request.
2839 Deleted OCSP_request_new(), since most of its functionality
2840 is now in OCSP_REQUEST_new() (and the case insensitive name
2841 clash) apart from the ability to set the request name which
2842 will be added elsewhere.
2845 *) Update OCSP API. Remove obsolete extensions argument from
2846 various functions. Extensions are now handled using the new
2847 OCSP extension code. New simple OCSP HTTP function which
2848 can be used to send requests and parse the response.
2851 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
2852 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
2853 uses the special reorder version of SET OF to sort the attributes
2854 and reorder them to match the encoded order. This resolves a long
2855 standing problem: a verify on a PKCS7 structure just after signing
2856 it used to fail because the attribute order did not match the
2857 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
2858 it uses the received order. This is necessary to tolerate some broken
2859 software that does not order SET OF. This is handled by encoding
2860 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
2861 to produce the required SET OF.
2864 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
2865 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
2866 files to get correct declarations of the ASN.1 item variables.
2869 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
2870 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
2871 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
2872 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
2873 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
2874 ASN1_ITEM and no wrapper functions.
2877 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
2878 replace the old function pointer based I/O routines. Change most of
2879 the *_d2i_bio() and *_d2i_fp() functions to use these.
2882 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
2883 lines, recognice more "algorithms" that can be deselected, and make
2884 it complain about algorithm deselection that isn't recognised.
2887 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
2888 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
2889 to use new functions. Add NO_ASN1_OLD which can be set to remove
2890 some old style ASN1 functions: this can be used to determine if old
2891 code will still work when these eventually go away.
2894 *) New extension functions for OCSP structures, these follow the
2895 same conventions as certificates and CRLs.
2898 *) New function X509V3_add1_i2d(). This automatically encodes and
2899 adds an extension. Its behaviour can be customised with various
2900 flags to append, replace or delete. Various wrappers added for
2901 certifcates and CRLs.
2904 *) Fix to avoid calling the underlying ASN1 print routine when
2905 an extension cannot be parsed. Correct a typo in the
2906 OCSP_SERVICELOC extension. Tidy up print OCSP format.
2909 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
2910 entries for variables.
2913 *) Add functionality to apps/openssl.c for detecting locking
2914 problems: As the program is single-threaded, all we have
2915 to do is register a locking callback using an array for
2916 storing which locks are currently held by the program.
2919 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
2920 SSL_get_ex_data_X509_STORE_idx(), which is used in
2921 ssl_verify_cert_chain() and thus can be called at any time
2922 during TLS/SSL handshakes so that thread-safety is essential.
2923 Unfortunately, the ex_data design is not at all suited
2924 for multi-threaded use, so it probably should be abolished.
2927 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
2928 [Broadcom, tweaked and integrated by Geoff Thorpe]
2930 *) Move common extension printing code to new function
2931 X509V3_print_extensions(). Reorganise OCSP print routines and
2932 implement some needed OCSP ASN1 functions. Add OCSP extensions.
2935 *) New function X509_signature_print() to remove duplication in some
2939 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
2940 set (this was treated exactly the same as SET OF previously). This
2941 is used to reorder the STACK representing the structure to match the
2942 encoding. This will be used to get round a problem where a PKCS7
2943 structure which was signed could not be verified because the STACK
2944 order did not reflect the encoded order.
2947 *) Reimplement the OCSP ASN1 module using the new code.
2950 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
2951 for its ASN1 operations. The old style function pointers still exist
2952 for now but they will eventually go away.
2955 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
2956 completely replaces the old ASN1 functionality with a table driven
2957 encoder and decoder which interprets an ASN1_ITEM structure describing
2958 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
2959 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
2960 has also been converted to the new form.
2963 *) Change BN_mod_exp_recp so that negative moduli are tolerated
2964 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
2965 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
2966 for negative moduli.
2969 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
2970 of not touching the result's sign bit.
2973 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
2977 *) Changed the LHASH code to use prototypes for callbacks, and created
2978 macros to declare and implement thin (optionally static) functions
2979 that provide type-safety and avoid function pointer casting for the
2980 type-specific callbacks.
2983 *) Added Kerberos Cipher Suites to be used with TLS, as written in
2985 [Veers Staats <staatsvr@asc.hpc.mil>,
2986 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
2988 *) Reformat the FAQ so the different questions and answers can be divided
2989 in sections depending on the subject.
2992 *) Have the zlib compression code load ZLIB.DLL dynamically under
2996 *) New function BN_mod_sqrt for computing square roots modulo a prime
2997 (using the probabilistic Tonelli-Shanks algorithm unless
2998 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
2999 be handled deterministically).
3000 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3002 *) Make BN_mod_inverse faster by explicitly handling small quotients
3003 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
3004 512 bits], about 30% for larger ones [1024 or 2048 bits].)
3007 *) New function BN_kronecker.
3010 *) Fix BN_gcd so that it works on negative inputs; the result is
3011 positive unless both parameters are zero.
3012 Previously something reasonably close to an infinite loop was
3013 possible because numbers could be growing instead of shrinking
3014 in the implementation of Euclid's algorithm.
3017 *) Fix BN_is_word() and BN_is_one() macros to take into account the
3018 sign of the number in question.
3020 Fix BN_is_word(a,w) to work correctly for w == 0.
3022 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
3023 because its test if the absolute value of 'a' equals 'w'.
3024 Note that BN_abs_is_word does *not* handle w == 0 reliably;
3025 it exists mostly for use in the implementations of BN_is_zero(),
3026 BN_is_one(), and BN_is_word().
3029 *) New function BN_swap.
3032 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
3033 the exponentiation functions are more likely to produce reasonable
3034 results on negative inputs.
3037 *) Change BN_mod_mul so that the result is always non-negative.
3038 Previously, it could be negative if one of the factors was negative;
3039 I don't think anyone really wanted that behaviour.
3042 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
3043 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
3044 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
3045 and add new functions:
3054 BN_mod_lshift1_quick
3058 These functions always generate non-negative results.
3060 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
3061 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
3063 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
3064 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
3065 be reduced modulo m.
3066 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3069 The following entry accidentily appeared in the CHANGES file
3070 distributed with OpenSSL 0.9.7. The modifications described in
3071 it do *not* apply to OpenSSL 0.9.7.
3073 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
3074 was actually never needed) and in BN_mul(). The removal in BN_mul()
3075 required a small change in bn_mul_part_recursive() and the addition
3076 of the functions bn_cmp_part_words(), bn_sub_part_words() and
3077 bn_add_part_words(), which do the same thing as bn_cmp_words(),
3078 bn_sub_words() and bn_add_words() except they take arrays with
3083 *) In 'openssl passwd', verify passwords read from the terminal
3084 unless the '-salt' option is used (which usually means that
3085 verification would just waste user's time since the resulting
3086 hash is going to be compared with some given password hash)
3087 or the new '-noverify' option is used.
3089 This is an incompatible change, but it does not affect
3090 non-interactive use of 'openssl passwd' (passwords on the command
3091 line, '-stdin' option, '-in ...' option) and thus should not
3095 *) Remove all references to RSAref, since there's no more need for it.
3098 *) Make DSO load along a path given through an environment variable
3099 (SHLIB_PATH) with shl_load().
3102 *) Constify the ENGINE code as a result of BIGNUM constification.
3103 Also constify the RSA code and most things related to it. In a
3104 few places, most notable in the depth of the ASN.1 code, ugly
3105 casts back to non-const were required (to be solved at a later
3109 *) Make it so the openssl application has all engines loaded by default.
3112 *) Constify the BIGNUM routines a little more.
3115 *) Add the following functions:
3117 ENGINE_load_cswift()
3119 ENGINE_load_atalla()
3121 ENGINE_load_builtin_engines()
3123 That way, an application can itself choose if external engines that
3124 are built-in in OpenSSL shall ever be used or not. The benefit is
3125 that applications won't have to be linked with libdl or other dso
3126 libraries unless it's really needed.
3128 Changed 'openssl engine' to load all engines on demand.
3129 Changed the engine header files to avoid the duplication of some
3130 declarations (they differed!).
3133 *) 'openssl engine' can now list capabilities.
3136 *) Better error reporting in 'openssl engine'.
3139 *) Never call load_dh_param(NULL) in s_server.
3142 *) Add engine application. It can currently list engines by name and
3143 identity, and test if they are actually available.
3146 *) Improve RPM specification file by forcing symbolic linking and making
3147 sure the installed documentation is also owned by root.root.
3148 [Damien Miller <djm@mindrot.org>]
3150 *) Give the OpenSSL applications more possibilities to make use of
3151 keys (public as well as private) handled by engines.
3154 *) Add OCSP code that comes from CertCo.
3157 *) Add VMS support for the Rijndael code.
3160 *) Added untested support for Nuron crypto accelerator.
3163 *) Add support for external cryptographic devices. This code was
3164 previously distributed separately as the "engine" branch.
3165 [Geoff Thorpe, Richard Levitte]
3167 *) Rework the filename-translation in the DSO code. It is now possible to
3168 have far greater control over how a "name" is turned into a filename
3169 depending on the operating environment and any oddities about the
3170 different shared library filenames on each system.
3173 *) Support threads on FreeBSD-elf in Configure.
3176 *) Fix for SHA1 assembly problem with MASM: it produces
3177 warnings about corrupt line number information when assembling
3178 with debugging information. This is caused by the overlapping
3180 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
3183 NCONF_get_number() has no error checking at all. As a replacement,
3184 NCONF_get_number_e() is defined (_e for "error checking") and is
3185 promoted strongly. The old NCONF_get_number is kept around for
3186 binary backward compatibility.
3187 Make it possible for methods to load from something other than a BIO,
3188 by providing a function pointer that is given a name instead of a BIO.
3189 For example, this could be used to load configuration data from an
3193 *) Fix for non blocking accept BIOs. Added new I/O special reason
3194 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
3195 with non blocking I/O was not possible because no retry code was
3196 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
3200 *) Added the beginnings of Rijndael support.
3203 *) Fix for bug in DirectoryString mask setting. Add support for
3204 X509_NAME_print_ex() in 'req' and X509_print_ex() function
3205 to allow certificate printing to more controllable, additional
3206 'certopt' option to 'x509' to allow new printing options to be
3210 *) Clean old EAY MD5 hack from e_os.h.
3213 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
3215 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3216 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3217 [Joe Orton, Steve Henson]
3219 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
3221 *) Fix additional bug revealed by the NISCC test suite:
3223 Stop bug triggering large recursion when presented with
3224 certain ASN.1 tags (CVE-2003-0851)
3227 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
3229 *) Fix various bugs revealed by running the NISCC test suite:
3231 Stop out of bounds reads in the ASN1 code when presented with
3232 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3234 If verify callback ignores invalid public key errors don't try to check
3235 certificate signature with the NULL public key.
3239 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3240 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3244 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3245 extra data after the compression methods not only for TLS 1.0
3246 but also for SSL 3.0 (as required by the specification).
3247 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3249 *) Change X509_certificate_type() to mark the key as exported/exportable
3250 when it's 512 *bits* long, not 512 bytes.
3253 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
3255 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3256 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3257 a protocol version number mismatch like a decryption error
3258 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3261 *) Turn on RSA blinding by default in the default implementation
3262 to avoid a timing attack. Applications that don't want it can call
3263 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3264 They would be ill-advised to do so in most cases.
3265 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3267 *) Change RSA blinding code so that it works when the PRNG is not
3268 seeded (in this case, the secret RSA exponent is abused as
3269 an unpredictable seed -- if it is not unpredictable, there
3270 is no point in blinding anyway). Make RSA blinding thread-safe
3271 by remembering the creator's thread ID in rsa->blinding and
3272 having all other threads use local one-time blinding factors
3273 (this requires more computation than sharing rsa->blinding, but
3274 avoids excessive locking; and if an RSA object is not shared
3275 between threads, blinding will still be very fast).
3278 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
3280 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3281 via timing by performing a MAC computation even if incorrrect
3282 block cipher padding has been found. This is a countermeasure
3283 against active attacks where the attacker has to distinguish
3284 between bad padding and a MAC verification error. (CVE-2003-0078)
3286 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3287 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3288 Martin Vuagnoux (EPFL, Ilion)]
3290 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
3292 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
3293 memory from it's contents. This is done with a counter that will
3294 place alternating values in each byte. This can be used to solve
3295 two issues: 1) the removal of calls to memset() by highly optimizing
3296 compilers, and 2) cleansing with other values than 0, since those can
3297 be read through on certain media, for example a swap space on disk.
3300 *) Bugfix: client side session caching did not work with external caching,
3301 because the session->cipher setting was not restored when reloading
3302 from the external cache. This problem was masked, when
3303 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
3304 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
3307 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
3308 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
3309 [Zeev Lieber <zeev-l@yahoo.com>]
3311 *) Undo an undocumented change introduced in 0.9.6e which caused
3312 repeated calls to OpenSSL_add_all_ciphers() and
3313 OpenSSL_add_all_digests() to be ignored, even after calling
3317 *) Change the default configuration reader to deal with last line not
3318 being properly terminated.
3321 *) Change X509_NAME_cmp() so it applies the special rules on handling
3322 DN values that are of type PrintableString, as well as RDNs of type
3323 emailAddress where the value has the type ia5String.
3324 [stefank@valicert.com via Richard Levitte]
3326 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
3327 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
3328 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
3329 the bitwise-OR of the two for use by the majority of applications
3330 wanting this behaviour, and update the docs. The documented
3331 behaviour and actual behaviour were inconsistent and had been
3332 changing anyway, so this is more a bug-fix than a behavioural
3334 [Geoff Thorpe, diagnosed by Nadav Har'El]
3336 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
3337 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
3340 *) Fix initialization code race conditions in
3341 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
3342 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
3343 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
3344 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
3345 ssl2_get_cipher_by_char(),
3346 ssl3_get_cipher_by_char().
3347 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
3349 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
3350 the cached sessions are flushed, as the remove_cb() might use ex_data
3351 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
3352 (see [openssl.org #212]).
3353 [Geoff Thorpe, Lutz Jaenicke]
3355 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
3356 length, instead of the encoding length to d2i_ASN1_OBJECT.
3359 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
3361 *) [In 0.9.6g-engine release:]
3362 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
3363 [Lynn Gazis <lgazis@rainbow.com>]
3365 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
3367 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
3368 and get fix the header length calculation.
3369 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
3370 Alon Kantor <alonk@checkpoint.com> (and others),
3373 *) Use proper error handling instead of 'assertions' in buffer
3374 overflow checks added in 0.9.6e. This prevents DoS (the
3375 assertions could call abort()).
3376 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
3378 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
3380 *) Add various sanity checks to asn1_get_length() to reject
3381 the ASN1 length bytes if they exceed sizeof(long), will appear
3382 negative or the content length exceeds the length of the
3384 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3386 *) Fix cipher selection routines: ciphers without encryption had no flags
3387 for the cipher strength set and where therefore not handled correctly
3388 by the selection routines (PR #130).
3391 *) Fix EVP_dsa_sha macro.
3395 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
3396 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
3397 that was added in OpenSSL 0.9.6d.
3399 As the countermeasure turned out to be incompatible with some
3400 broken SSL implementations, the new option is part of SSL_OP_ALL.
3401 SSL_OP_ALL is usually employed when compatibility with weird SSL
3402 implementations is desired (e.g. '-bugs' option to 's_client' and
3403 's_server'), so the new option is automatically set in many
3407 *) Changes in security patch:
3409 Changes marked "(CHATS)" were sponsored by the Defense Advanced
3410 Research Projects Agency (DARPA) and Air Force Research Laboratory,
3411 Air Force Materiel Command, USAF, under agreement number
3414 *) Add various sanity checks to asn1_get_length() to reject
3415 the ASN1 length bytes if they exceed sizeof(long), will appear
3416 negative or the content length exceeds the length of the
3417 supplied buffer. (CVE-2002-0659)
3418 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3420 *) Assertions for various potential buffer overflows, not known to
3422 [Ben Laurie (CHATS)]
3424 *) Various temporary buffers to hold ASCII versions of integers were
3425 too small for 64 bit platforms. (CVE-2002-0655)
3426 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
3428 *) Remote buffer overflow in SSL3 protocol - an attacker could
3429 supply an oversized session ID to a client. (CVE-2002-0656)
3430 [Ben Laurie (CHATS)]
3432 *) Remote buffer overflow in SSL2 protocol - an attacker could
3433 supply an oversized client master key. (CVE-2002-0656)
3434 [Ben Laurie (CHATS)]
3436 Changes between 0.9.6c and 0.9.6d [9 May 2002]
3438 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
3439 encoded as NULL) with id-dsa-with-sha1.
3440 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
3442 *) Check various X509_...() return values in apps/req.c.
3443 [Nils Larsch <nla@trustcenter.de>]
3445 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
3446 an end-of-file condition would erronously be flagged, when the CRLF
3447 was just at the end of a processed block. The bug was discovered when
3448 processing data through a buffering memory BIO handing the data to a
3449 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
3450 <ptsekov@syntrex.com> and Nedelcho Stanev.
3453 *) Implement a countermeasure against a vulnerability recently found
3454 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
3455 before application data chunks to avoid the use of known IVs
3456 with data potentially chosen by the attacker.
3459 *) Fix length checks in ssl3_get_client_hello().
3462 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
3463 to prevent ssl3_read_internal() from incorrectly assuming that
3464 ssl3_read_bytes() found application data while handshake
3465 processing was enabled when in fact s->s3->in_read_app_data was
3466 merely automatically cleared during the initial handshake.
3467 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
3469 *) Fix object definitions for Private and Enterprise: they were not
3470 recognized in their shortname (=lowercase) representation. Extend
3471 obj_dat.pl to issue an error when using undefined keywords instead
3472 of silently ignoring the problem (Svenning Sorensen
3473 <sss@sss.dnsalias.net>).
3476 *) Fix DH_generate_parameters() so that it works for 'non-standard'
3477 generators, i.e. generators other than 2 and 5. (Previously, the
3478 code did not properly initialise the 'add' and 'rem' values to
3479 BN_generate_prime().)
3481 In the new general case, we do not insist that 'generator' is
3482 actually a primitive root: This requirement is rather pointless;
3483 a generator of the order-q subgroup is just as good, if not
3487 *) Map new X509 verification errors to alerts. Discovered and submitted by
3488 Tom Wu <tom@arcot.com>.
3491 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
3492 returning non-zero before the data has been completely received
3493 when using non-blocking I/O.
3494 [Bodo Moeller; problem pointed out by John Hughes]
3496 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
3497 [Ben Laurie, Lutz Jaenicke]
3499 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
3500 Yoram Zahavi <YoramZ@gilian.com>).
3503 *) Add information about CygWin 1.3 and on, and preserve proper
3504 configuration for the versions before that.
3505 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3507 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
3508 check whether we deal with a copy of a session and do not delete from
3509 the cache in this case. Problem reported by "Izhar Shoshani Levi"
3510 <izhar@checkpoint.com>.
3513 *) Do not store session data into the internal session cache, if it
3514 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
3515 flag is set). Proposed by Aslam <aslam@funk.com>.
3518 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
3522 *) [In 0.9.6d-engine release:]
3523 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3524 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3526 *) Add the configuration target linux-s390x.
3527 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
3529 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
3530 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
3531 variable as an indication that a ClientHello message has been
3532 received. As the flag value will be lost between multiple
3533 invocations of ssl3_accept when using non-blocking I/O, the
3534 function may not be aware that a handshake has actually taken
3535 place, thus preventing a new session from being added to the
3538 To avoid this problem, we now set s->new_session to 2 instead of
3539 using a local variable.
3540 [Lutz Jaenicke, Bodo Moeller]
3542 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
3543 if the SSL_R_LENGTH_MISMATCH error is detected.
3544 [Geoff Thorpe, Bodo Moeller]
3546 *) New 'shared_ldflag' column in Configure platform table.
3549 *) Fix EVP_CIPHER_mode macro.
3550 ["Dan S. Camper" <dan@bti.net>]
3552 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
3553 type, we must throw them away by setting rr->length to 0.
3554 [D P Chang <dpc@qualys.com>]
3556 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
3558 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
3559 <Dominikus.Scherkl@biodata.com>. (The previous implementation
3560 worked incorrectly for those cases where range = 10..._2 and
3561 3*range is two bits longer than range.)
3564 *) Only add signing time to PKCS7 structures if it is not already
3568 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
3569 OBJ_ld_ce should be OBJ_id_ce.
3570 Also some ip-pda OIDs in crypto/objects/objects.txt were
3571 incorrect (cf. RFC 3039).
3572 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
3574 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
3575 returns early because it has nothing to do.
3576 [Andy Schneider <andy.schneider@bjss.co.uk>]
3578 *) [In 0.9.6c-engine release:]
3579 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
3580 [Andy Schneider <andy.schneider@bjss.co.uk>]
3582 *) [In 0.9.6c-engine release:]
3583 Add support for Cryptographic Appliance's keyserver technology.
3584 (Use engine 'keyclient')
3585 [Cryptographic Appliances and Geoff Thorpe]
3587 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
3588 is called via tools/c89.sh because arguments have to be
3589 rearranged (all '-L' options must appear before the first object
3591 [Richard Shapiro <rshapiro@abinitio.com>]
3593 *) [In 0.9.6c-engine release:]
3594 Add support for Broadcom crypto accelerator cards, backported
3596 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
3598 *) [In 0.9.6c-engine release:]
3599 Add support for SureWare crypto accelerator cards from
3600 Baltimore Technologies. (Use engine 'sureware')
3601 [Baltimore Technologies and Mark Cox]
3603 *) [In 0.9.6c-engine release:]
3604 Add support for crypto accelerator cards from Accelerated
3605 Encryption Processing, www.aep.ie. (Use engine 'aep')
3606 [AEP Inc. and Mark Cox]
3608 *) Add a configuration entry for gcc on UnixWare.
3609 [Gary Benson <gbenson@redhat.com>]
3611 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
3612 messages are stored in a single piece (fixed-length part and
3613 variable-length part combined) and fix various bugs found on the way.
3616 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
3617 instead. BIO_gethostbyname() does not know what timeouts are
3618 appropriate, so entries would stay in cache even when they have
3620 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
3622 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
3623 faced with a pathologically small ClientHello fragment that does
3624 not contain client_version: Instead of aborting with an error,
3625 simply choose the highest available protocol version (i.e.,
3626 TLS 1.0 unless it is disabled). In practice, ClientHello
3627 messages are never sent like this, but this change gives us
3628 strictly correct behaviour at least for TLS.
3631 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
3632 never resets s->method to s->ctx->method when called from within
3633 one of the SSL handshake functions.
3634 [Bodo Moeller; problem pointed out by Niko Baric]
3636 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
3637 (sent using the client's version number) if client_version is
3638 smaller than the protocol version in use. Also change
3639 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
3640 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
3641 the client will at least see that alert.
3644 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
3648 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
3649 client receives HelloRequest while in a handshake.
3650 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
3652 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
3653 should end in 'break', not 'goto end' which circuments various
3654 cleanups done in state SSL_ST_OK. But session related stuff
3655 must be disabled for SSL_ST_OK in the case that we just sent a
3658 Also avoid some overhead by not calling ssl_init_wbio_buffer()
3659 before just sending a HelloRequest.
3660 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
3662 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
3663 reveal whether illegal block cipher padding was found or a MAC
3664 verification error occured. (Neither SSLerr() codes nor alerts
3665 are directly visible to potential attackers, but the information
3666 may leak via logfiles.)
3668 Similar changes are not required for the SSL 2.0 implementation
3669 because the number of padding bytes is sent in clear for SSL 2.0,
3670 and the extra bytes are just ignored. However ssl/s2_pkt.c
3671 failed to verify that the purported number of padding bytes is in
3675 *) Add OpenUNIX-8 support including shared libraries
3676 (Boyd Lynn Gerber <gerberb@zenez.com>).
3679 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
3680 'wristwatch attack' using huge encoding parameters (cf.
3681 James H. Manger's CRYPTO 2001 paper). Note that the
3682 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
3683 encoding parameters and hence was not vulnerable.
3686 *) BN_sqr() bug fix.
3687 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
3689 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
3690 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
3691 followed by modular reduction.
3692 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
3694 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
3695 equivalent based on BN_pseudo_rand() instead of BN_rand().
3698 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
3699 This function was broken, as the check for a new client hello message
3700 to handle SGC did not allow these large messages.
3701 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
3704 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
3707 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
3708 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
3711 *) Rework the configuration and shared library support for Tru64 Unix.
3712 The configuration part makes use of modern compiler features and
3713 still retains old compiler behavior for those that run older versions
3714 of the OS. The shared library support part includes a variant that
3715 uses the RPATH feature, and is available through the special
3716 configuration target "alpha-cc-rpath", which will never be selected
3718 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
3720 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
3721 with the same message size as in ssl3_get_certificate_request().
3722 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
3723 messages might inadvertently be reject as too long.
3724 [Petr Lampa <lampa@fee.vutbr.cz>]
3726 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
3729 *) Modified SSL library such that the verify_callback that has been set
3730 specificly for an SSL object with SSL_set_verify() is actually being
3731 used. Before the change, a verify_callback set with this function was
3732 ignored and the verify_callback() set in the SSL_CTX at the time of
3733 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
3734 to allow the necessary settings.
3737 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
3738 explicitly to NULL, as at least on Solaris 8 this seems not always to be
3739 done automatically (in contradiction to the requirements of the C
3740 standard). This made problems when used from OpenSSH.
3743 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
3744 dh->length and always used
3746 BN_rand_range(priv_key, dh->p).
3748 BN_rand_range() is not necessary for Diffie-Hellman, and this
3749 specific range makes Diffie-Hellman unnecessarily inefficient if
3750 dh->length (recommended exponent length) is much smaller than the
3751 length of dh->p. We could use BN_rand_range() if the order of
3752 the subgroup was stored in the DH structure, but we only have
3757 BN_rand(priv_key, l, ...)
3759 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
3765 RSA_eay_public_encrypt
3766 RSA_eay_private_decrypt
3767 RSA_eay_private_encrypt (signing)
3768 RSA_eay_public_decrypt (signature verification)
3770 (default implementations for RSA_public_encrypt,
3771 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
3772 always reject numbers >= n.
3775 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
3776 to synchronize access to 'locking_thread'. This is necessary on
3777 systems where access to 'locking_thread' (an 'unsigned long'
3778 variable) is not atomic.
3781 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
3782 *before* setting the 'crypto_lock_rand' flag. The previous code had
3783 a race condition if 0 is a valid thread ID.
3784 [Travis Vitek <vitek@roguewave.com>]
3786 *) Add support for shared libraries under Irix.
3787 [Albert Chin-A-Young <china@thewrittenword.com>]
3789 *) Add configuration option to build on Linux on both big-endian and
3791 [Ralf Baechle <ralf@uni-koblenz.de>]
3793 *) Add the possibility to create shared libraries on HP-UX.
3796 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
3798 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
3799 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
3800 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
3801 PRNG state recovery was possible based on the output of
3802 one PRNG request appropriately sized to gain knowledge on
3803 'md' followed by enough consecutive 1-byte PRNG requests
3804 to traverse all of 'state'.
3806 1. When updating 'md_local' (the current thread's copy of 'md')
3807 during PRNG output generation, hash all of the previous
3808 'md_local' value, not just the half used for PRNG output.
3810 2. Make the number of bytes from 'state' included into the hash
3811 independent from the number of PRNG bytes requested.
3813 The first measure alone would be sufficient to avoid
3814 Markku-Juhani's attack. (Actually it had never occurred
3815 to me that the half of 'md_local' used for chaining was the
3816 half from which PRNG output bytes were taken -- I had always
3817 assumed that the secret half would be used.) The second
3818 measure makes sure that additional data from 'state' is never
3819 mixed into 'md_local' in small portions; this heuristically
3820 further strengthens the PRNG.
3823 *) Fix crypto/bn/asm/mips3.s.
3826 *) When only the key is given to "enc", the IV is undefined. Print out
3827 an error message in this case.
3830 *) Handle special case when X509_NAME is empty in X509 printing routines.
3833 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
3834 positive and less than q.
3837 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
3838 used: it isn't thread safe and the add_lock_callback should handle
3840 [Paul Rose <Paul.Rose@bridge.com>]
3842 *) Verify that incoming data obeys the block size in
3843 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
3847 [Ulf Möller, Bodo Möller]
3849 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
3850 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
3851 when fixing the server behaviour for backwards-compatible 'client
3852 hello' messages. (Note that the attack is impractical against
3853 SSL 3.0 and TLS 1.0 anyway because length and version checking
3854 means that the probability of guessing a valid ciphertext is
3855 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
3858 Before 0.9.5, the countermeasure (hide the error by generating a
3859 random 'decryption result') did not work properly because
3860 ERR_clear_error() was missing, meaning that SSL_get_error() would
3861 detect the supposedly ignored error.
3863 Both problems are now fixed.
3866 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
3867 (previously it was 1024).
3870 *) Fix for compatibility mode trust settings: ignore trust settings
3871 unless some valid trust or reject settings are present.
3874 *) Fix for blowfish EVP: its a variable length cipher.
3877 *) Fix various bugs related to DSA S/MIME verification. Handle missing
3878 parameters in DSA public key structures and return an error in the
3879 DSA routines if parameters are absent.
3882 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
3883 in the current directory if neither $RANDFILE nor $HOME was set.
3884 RAND_file_name() in 0.9.6a returned NULL in this case. This has
3885 caused some confusion to Windows users who haven't defined $HOME.
3886 Thus RAND_file_name() is changed again: e_os.h can define a
3887 DEFAULT_HOME, which will be used if $HOME is not set.
3888 For Windows, we use "C:"; on other platforms, we still require
3889 environment variables.
3891 *) Move 'if (!initialized) RAND_poll()' into regions protected by
3892 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
3893 having multiple threads call RAND_poll() concurrently.
3896 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
3897 combination of a flag and a thread ID variable.
3898 Otherwise while one thread is in ssleay_rand_bytes (which sets the
3899 flag), *other* threads can enter ssleay_add_bytes without obeying
3900 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
3901 that they do not hold after the first thread unsets add_do_not_lock).
3904 *) Change bctest again: '-x' expressions are not available in all
3908 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
3910 *) Fix a couple of memory leaks in PKCS7_dataDecode()
3911 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
3913 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
3914 the default extension for executables, if any. Also, make the perl
3915 scripts that use symlink() to test if it really exists and use "cp"
3916 if it doesn't. All this made OpenSSL compilable and installable in
3920 *) Fix for asn1_GetSequence() for indefinite length constructed data.
3921 If SEQUENCE is length is indefinite just set c->slen to the total
3922 amount of data available.
3923 [Steve Henson, reported by shige@FreeBSD.org]
3924 [This change does not apply to 0.9.7.]
3926 *) Change bctest to avoid here-documents inside command substitution
3927 (workaround for FreeBSD /bin/sh bug).
3928 For compatibility with Ultrix, avoid shell functions (introduced
3929 in the bctest version that searches along $PATH).
3932 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
3933 with des_encrypt() defined on some operating systems, like Solaris
3937 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
3938 On the Importance of Eliminating Errors in Cryptographic
3939 Computations, J. Cryptology 14 (2001) 2, 101-119,
3940 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
3943 *) MIPS assembler BIGNUM division bug fix.
3946 *) Disabled incorrect Alpha assembler code.
3949 *) Fix PKCS#7 decode routines so they correctly update the length
3950 after reading an EOC for the EXPLICIT tag.
3952 [This change does not apply to 0.9.7.]
3954 *) Fix bug in PKCS#12 key generation routines. This was triggered
3955 if a 3DES key was generated with a 0 initial byte. Include
3956 PKCS12_BROKEN_KEYGEN compilation option to retain the old
3957 (but broken) behaviour.
3960 *) Enhance bctest to search for a working bc along $PATH and print
3962 [Tim Rice <tim@multitalents.net> via Richard Levitte]
3964 *) Fix memory leaks in err.c: free err_data string if necessary;
3965 don't write to the wrong index in ERR_set_error_data.
3968 *) Implement ssl23_peek (analogous to ssl23_read), which previously
3972 *) Replace rdtsc with _emit statements for VC++ version 5.
3973 [Jeremy Cooper <jeremy@baymoo.org>]
3975 *) Make it possible to reuse SSLv2 sessions.
3978 *) In copy_email() check for >= 0 as a return value for
3979 X509_NAME_get_index_by_NID() since 0 is a valid index.
3980 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
3982 *) Avoid coredump with unsupported or invalid public keys by checking if
3983 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
3984 PKCS7_verify() fails with non detached data.
3987 *) Don't use getenv in library functions when run as setuid/setgid.
3988 New function OPENSSL_issetugid().
3991 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
3992 due to incorrect handling of multi-threading:
3994 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
3996 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
3998 3. Count how many times MemCheck_off() has been called so that
3999 nested use can be treated correctly. This also avoids
4000 inband-signalling in the previous code (which relied on the
4001 assumption that thread ID 0 is impossible).
4004 *) Add "-rand" option also to s_client and s_server.
4007 *) Fix CPU detection on Irix 6.x.
4008 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
4009 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4011 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
4014 [This change does not apply to 0.9.7.]
4016 *) Use the cached encoding of an X509_NAME structure rather than
4017 copying it. This is apparently the reason for the libsafe "errors"
4018 but the code is actually correct.
4021 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
4022 Bleichenbacher's DSA attack.
4023 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
4024 to be set and top=0 forces the highest bit to be set; top=-1 is new
4025 and leaves the highest bit random.
4026 [Ulf Moeller, Bodo Moeller]
4028 *) In the NCONF_...-based implementations for CONF_... queries
4029 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
4030 a temporary CONF structure with the data component set to NULL
4031 (which gives segmentation faults in lh_retrieve).
4032 Instead, use NULL for the CONF pointer in CONF_get_string and
4033 CONF_get_number (which may use environment variables) and directly
4034 return NULL from CONF_get_section.
4037 *) Fix potential buffer overrun for EBCDIC.
4040 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
4041 keyUsage if basicConstraints absent for a CA.
4044 *) Make SMIME_write_PKCS7() write mail header values with a format that
4045 is more generally accepted (no spaces before the semicolon), since
4046 some programs can't parse those values properly otherwise. Also make
4047 sure BIO's that break lines after each write do not create invalid
4051 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
4052 macros previously used would not encode an empty SEQUENCE OF
4053 and break the signature.
4055 [This change does not apply to 0.9.7.]
4057 *) Zero the premaster secret after deriving the master secret in
4061 *) Add some EVP_add_digest_alias registrations (as found in
4062 OpenSSL_add_all_digests()) to SSL_library_init()
4063 aka OpenSSL_add_ssl_algorithms(). This provides improved
4064 compatibility with peers using X.509 certificates
4065 with unconventional AlgorithmIdentifier OIDs.
4068 *) Fix for Irix with NO_ASM.
4069 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4071 *) ./config script fixes.
4072 [Ulf Moeller, Richard Levitte]
4074 *) Fix 'openssl passwd -1'.
4077 *) Change PKCS12_key_gen_asc() so it can cope with non null
4078 terminated strings whose length is passed in the passlen
4079 parameter, for example from PEM callbacks. This was done
4080 by adding an extra length parameter to asc2uni().
4081 [Steve Henson, reported by <oddissey@samsung.co.kr>]
4083 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
4084 call failed, free the DSA structure.
4087 *) Fix to uni2asc() to cope with zero length Unicode strings.
4088 These are present in some PKCS#12 files.
4091 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
4092 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
4093 when writing a 32767 byte record.
4094 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
4096 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
4097 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
4099 (RSA objects have a reference count access to which is protected
4100 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
4101 so they are meant to be shared between threads.)
4102 [Bodo Moeller, Geoff Thorpe; original patch submitted by
4103 "Reddie, Steven" <Steven.Reddie@ca.com>]
4105 *) Fix a deadlock in CRYPTO_mem_leaks().
4108 *) Use better test patterns in bntest.
4111 *) rand_win.c fix for Borland C.
4114 *) BN_rshift bugfix for n == 0.
4117 *) Add a 'bctest' script that checks for some known 'bc' bugs
4118 so that 'make test' does not abort just because 'bc' is broken.
4121 *) Store verify_result within SSL_SESSION also for client side to
4122 avoid potential security hole. (Re-used sessions on the client side
4123 always resulted in verify_result==X509_V_OK, not using the original
4124 result of the server certificate verification.)
4127 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
4128 SSL3_RT_APPLICATION_DATA, return 0.
4129 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
4133 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
4134 releases, have been re-implemented by renaming the previous
4135 implementations of ssl2_read and ssl3_read to ssl2_read_internal
4136 and ssl3_read_internal, respectively, and adding 'peek' parameters
4137 to them. The new ssl[23]_{read,peek} functions are calls to
4138 ssl[23]_read_internal with the 'peek' flag set appropriately.
4139 A 'peek' parameter has also been added to ssl3_read_bytes, which
4140 does the actual work for ssl3_read_internal.
4143 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
4144 the method-specific "init()" handler. Also clean up ex_data after
4145 calling the method-specific "finish()" handler. Previously, this was
4146 happening the other way round.
4149 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
4150 The previous value, 12, was not always sufficient for BN_mod_exp().
4153 *) Make sure that shared libraries get the internal name engine with
4154 the full version number and not just 0. This should mark the
4155 shared libraries as not backward compatible. Of course, this should
4156 be changed again when we can guarantee backward binary compatibility.
4159 *) Fix typo in get_cert_by_subject() in by_dir.c
4160 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
4162 *) Rework the system to generate shared libraries:
4164 - Make note of the expected extension for the shared libraries and
4165 if there is a need for symbolic links from for example libcrypto.so.0
4166 to libcrypto.so.0.9.7. There is extended info in Configure for
4169 - Make as few rebuilds of the shared libraries as possible.
4171 - Still avoid linking the OpenSSL programs with the shared libraries.
4173 - When installing, install the shared libraries separately from the
4177 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
4179 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
4180 and not in SSL_clear because the latter is also used by the
4181 accept/connect functions; previously, the settings made by
4182 SSL_set_read_ahead would be lost during the handshake.
4183 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
4185 *) Correct util/mkdef.pl to be selective about disabled algorithms.
4186 Previously, it would create entries for disableed algorithms no
4190 *) Added several new manual pages for SSL_* function.
4193 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
4195 *) In ssl23_get_client_hello, generate an error message when faced
4196 with an initial SSL 3.0/TLS record that is too small to contain the
4197 first two bytes of the ClientHello message, i.e. client_version.
4198 (Note that this is a pathologic case that probably has never happened
4199 in real life.) The previous approach was to use the version number
4200 from the record header as a substitute; but our protocol choice
4201 should not depend on that one because it is not authenticated
4202 by the Finished messages.
4205 *) More robust randomness gathering functions for Windows.
4206 [Jeffrey Altman <jaltman@columbia.edu>]
4208 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
4209 not set then we don't setup the error code for issuer check errors
4210 to avoid possibly overwriting other errors which the callback does
4211 handle. If an application does set the flag then we assume it knows
4212 what it is doing and can handle the new informational codes
4216 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
4217 a general "ANY" type, as such it should be able to decode anything
4218 including tagged types. However it didn't check the class so it would
4219 wrongly interpret tagged types in the same way as their universal
4220 counterpart and unknown types were just rejected. Changed so that the
4221 tagged and unknown types are handled in the same way as a SEQUENCE:
4222 that is the encoding is stored intact. There is also a new type
4223 "V_ASN1_OTHER" which is used when the class is not universal, in this
4224 case we have no idea what the actual type is so we just lump them all
4228 *) On VMS, stdout may very well lead to a file that is written to
4229 in a record-oriented fashion. That means that every write() will
4230 write a separate record, which will be read separately by the
4231 programs trying to read from it. This can be very confusing.
4233 The solution is to put a BIO filter in the way that will buffer
4234 text until a linefeed is reached, and then write everything a
4235 line at a time, so every record written will be an actual line,
4236 not chunks of lines and not (usually doesn't happen, but I've
4237 seen it once) several lines in one record. BIO_f_linebuffer() is
4240 Currently, it's a VMS-only method, because that's where it has
4241 been tested well enough.
4244 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
4245 it can return incorrect results.
4246 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
4247 but it was in 0.9.6-beta[12].)
4250 *) Disable the check for content being present when verifying detached
4251 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
4252 include zero length content when signing messages.
4255 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
4256 BIO_ctrl (for BIO pairs).
4259 *) Add DSO method for VMS.
4262 *) Bug fix: Montgomery multiplication could produce results with the
4266 *) Add RPM specification openssl.spec and modify it to build three
4267 packages. The default package contains applications, application
4268 documentation and run-time libraries. The devel package contains
4269 include files, static libraries and function documentation. The
4270 doc package contains the contents of the doc directory. The original
4271 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
4274 *) Add a large number of documentation files for many SSL routines.
4275 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
4277 *) Add a configuration entry for Sony News 4.
4278 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
4280 *) Don't set the two most significant bits to one when generating a
4281 random number < q in the DSA library.
4284 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
4285 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
4286 the underlying transport is blocking) if a handshake took place.
4287 (The default behaviour is needed by applications such as s_client
4288 and s_server that use select() to determine when to use SSL_read;
4289 but for applications that know in advance when to expect data, it
4290 just makes things more complicated.)
4293 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
4297 *) Add a few more EBCDIC conditionals that make `req' and `x509'
4298 work better on such systems.
4299 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
4301 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
4302 Update PKCS12_parse() so it copies the friendlyName and the
4303 keyid to the certificates aux info.
4306 *) Fix bug in PKCS7_verify() which caused an infinite loop
4307 if there was more than one signature.
4308 [Sven Uszpelkat <su@celocom.de>]
4310 *) Major change in util/mkdef.pl to include extra information
4311 about each symbol, as well as presentig variables as well
4312 as functions. This change means that there's n more need
4313 to rebuild the .num files when some algorithms are excluded.
4316 *) Allow the verify time to be set by an application,
4317 rather than always using the current time.
4320 *) Phase 2 verify code reorganisation. The certificate
4321 verify code now looks up an issuer certificate by a
4322 number of criteria: subject name, authority key id
4323 and key usage. It also verifies self signed certificates
4324 by the same criteria. The main comparison function is
4325 X509_check_issued() which performs these checks.
4327 Lot of changes were necessary in order to support this
4328 without completely rewriting the lookup code.
4330 Authority and subject key identifier are now cached.
4332 The LHASH 'certs' is X509_STORE has now been replaced
4333 by a STACK_OF(X509_OBJECT). This is mainly because an
4334 LHASH can't store or retrieve multiple objects with
4335 the same hash value.
4337 As a result various functions (which were all internal
4338 use only) have changed to handle the new X509_STORE
4339 structure. This will break anything that messed round
4340 with X509_STORE internally.
4342 The functions X509_STORE_add_cert() now checks for an
4343 exact match, rather than just subject name.
4345 The X509_STORE API doesn't directly support the retrieval
4346 of multiple certificates matching a given criteria, however
4347 this can be worked round by performing a lookup first
4348 (which will fill the cache with candidate certificates)
4349 and then examining the cache for matches. This is probably
4350 the best we can do without throwing out X509_LOOKUP
4351 entirely (maybe later...).
4353 The X509_VERIFY_CTX structure has been enhanced considerably.
4355 All certificate lookup operations now go via a get_issuer()
4356 callback. Although this currently uses an X509_STORE it
4357 can be replaced by custom lookups. This is a simple way
4358 to bypass the X509_STORE hackery necessary to make this
4359 work and makes it possible to use more efficient techniques
4360 in future. A very simple version which uses a simple
4361 STACK for its trusted certificate store is also provided
4362 using X509_STORE_CTX_trusted_stack().
4364 The verify_cb() and verify() callbacks now have equivalents
4365 in the X509_STORE_CTX structure.
4367 X509_STORE_CTX also has a 'flags' field which can be used
4368 to customise the verify behaviour.
4371 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
4372 excludes S/MIME capabilities.
4375 *) When a certificate request is read in keep a copy of the
4376 original encoding of the signed data and use it when outputing
4377 again. Signatures then use the original encoding rather than
4378 a decoded, encoded version which may cause problems if the
4379 request is improperly encoded.
4382 *) For consistency with other BIO_puts implementations, call
4383 buffer_write(b, ...) directly in buffer_puts instead of calling
4386 In BIO_puts, increment b->num_write as in BIO_write.
4387 [Peter.Sylvester@EdelWeb.fr]
4389 *) Fix BN_mul_word for the case where the word is 0. (We have to use
4390 BN_zero, we may not return a BIGNUM with an array consisting of
4394 *) Avoid calling abort() from within the library when problems are
4395 detected, except if preprocessor symbols have been defined
4396 (such as REF_CHECK, BN_DEBUG etc.).
4399 *) New openssl application 'rsautl'. This utility can be
4400 used for low level RSA operations. DER public key
4401 BIO/fp routines also added.
4404 *) New Configure entry and patches for compiling on QNX 4.
4405 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
4407 *) A demo state-machine implementation was sponsored by
4408 Nuron (http://www.nuron.com/) and is now available in
4409 demos/state_machine.
4412 *) New options added to the 'dgst' utility for signature
4413 generation and verification.
4416 *) Unrecognized PKCS#7 content types are now handled via a
4417 catch all ASN1_TYPE structure. This allows unsupported
4418 types to be stored as a "blob" and an application can
4419 encode and decode it manually.
4422 *) Fix various signed/unsigned issues to make a_strex.c
4424 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
4426 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
4427 length if passed a buffer. ASN1_INTEGER_to_BN failed
4428 if passed a NULL BN and its argument was negative.
4429 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
4431 *) Modification to PKCS#7 encoding routines to output definite
4432 length encoding. Since currently the whole structures are in
4433 memory there's not real point in using indefinite length
4434 constructed encoding. However if OpenSSL is compiled with
4435 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
4438 *) Added BIO_vprintf() and BIO_vsnprintf().
4441 *) Added more prefixes to parse for in the the strings written
4442 through a logging bio, to cover all the levels that are available
4443 through syslog. The prefixes are now:
4445 PANIC, EMERG, EMR => LOG_EMERG
4446 ALERT, ALR => LOG_ALERT
4447 CRIT, CRI => LOG_CRIT
4448 ERROR, ERR => LOG_ERR
4449 WARNING, WARN, WAR => LOG_WARNING
4450 NOTICE, NOTE, NOT => LOG_NOTICE
4451 INFO, INF => LOG_INFO
4452 DEBUG, DBG => LOG_DEBUG
4454 and as before, if none of those prefixes are present at the
4455 beginning of the string, LOG_ERR is chosen.
4457 On Win32, the LOG_* levels are mapped according to this:
4459 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
4460 LOG_WARNING => EVENTLOG_WARNING_TYPE
4461 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
4465 *) Made it possible to reconfigure with just the configuration
4466 argument "reconf" or "reconfigure". The command line arguments
4467 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
4468 and are retrieved from there when reconfiguring.
4472 [Assar Westerlund <assar@sics.se>, Richard Levitte]
4474 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
4477 *) The obj_dat.pl script was messing up the sorting of object
4478 names. The reason was that it compared the quoted version
4479 of strings as a result "OCSP" > "OCSP Signing" because
4480 " > SPACE. Changed script to store unquoted versions of
4481 names and add quotes on output. It was also omitting some
4482 names from the lookup table if they were given a default
4483 value (that is if SN is missing it is given the same
4484 value as LN and vice versa), these are now added on the
4485 grounds that if an object has a name we should be able to
4486 look it up. Finally added warning output when duplicate
4487 short or long names are found.
4490 *) Changes needed for Tandem NSK.
4491 [Scott Uroff <scott@xypro.com>]
4493 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
4494 RSA_padding_check_SSLv23(), special padding was never detected
4495 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
4496 version rollback attacks was not effective.
4498 In s23_clnt.c, don't use special rollback-attack detection padding
4499 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
4500 client; similarly, in s23_srvr.c, don't do the rollback check if
4501 SSL 2.0 is the only protocol enabled in the server.
4504 *) Make it possible to get hexdumps of unprintable data with 'openssl
4505 asn1parse'. By implication, the functions ASN1_parse_dump() and
4506 BIO_dump_indent() are added.
4509 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
4510 these print out strings and name structures based on various
4511 flags including RFC2253 support and proper handling of
4512 multibyte characters. Added options to the 'x509' utility
4513 to allow the various flags to be set.
4516 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
4517 Also change the functions X509_cmp_current_time() and
4518 X509_gmtime_adj() work with an ASN1_TIME structure,
4519 this will enable certificates using GeneralizedTime in validity
4520 dates to be checked.
4523 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
4524 negative public key encodings) on by default,
4525 NO_NEG_PUBKEY_BUG can be set to disable it.
4528 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
4529 content octets. An i2c_ASN1_OBJECT is unnecessary because
4530 the encoding can be trivially obtained from the structure.
4533 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
4534 not read locks (CRYPTO_r_[un]lock).
4537 *) A first attempt at creating official support for shared
4538 libraries through configuration. I've kept it so the
4539 default is static libraries only, and the OpenSSL programs
4540 are always statically linked for now, but there are
4541 preparations for dynamic linking in place.
4542 This has been tested on Linux and Tru64.
4545 *) Randomness polling function for Win9x, as described in:
4546 Peter Gutmann, Software Generation of Practically Strong
4550 *) Fix so PRNG is seeded in req if using an already existing
4554 *) New options to smime application. -inform and -outform
4555 allow alternative formats for the S/MIME message including
4556 PEM and DER. The -content option allows the content to be
4557 specified separately. This should allow things like Netscape
4558 form signing output easier to verify.
4561 *) Fix the ASN1 encoding of tags using the 'long form'.
4564 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
4565 STRING types. These convert content octets to and from the
4566 underlying type. The actual tag and length octets are
4567 already assumed to have been read in and checked. These
4568 are needed because all other string types have virtually
4569 identical handling apart from the tag. By having versions
4570 of the ASN1 functions that just operate on content octets
4571 IMPLICIT tagging can be handled properly. It also allows
4572 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
4573 and ASN1_INTEGER are identical apart from the tag.
4576 *) Change the handling of OID objects as follows:
4578 - New object identifiers are inserted in objects.txt, following
4579 the syntax given in objects.README.
4580 - objects.pl is used to process obj_mac.num and create a new
4582 - obj_dat.pl is used to create a new obj_dat.h, using the data in
4585 This is currently kind of a hack, and the perl code in objects.pl
4586 isn't very elegant, but it works as I intended. The simplest way
4587 to check that it worked correctly is to look in obj_dat.h and
4588 check the array nid_objs and make sure the objects haven't moved
4589 around (this is important!). Additions are OK, as well as
4590 consistent name changes.
4593 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
4596 *) Addition of the command line parameter '-rand file' to 'openssl req'.
4597 The given file adds to whatever has already been seeded into the
4598 random pool through the RANDFILE configuration file option or
4599 environment variable, or the default random state file.
4602 *) mkstack.pl now sorts each macro group into lexical order.
4603 Previously the output order depended on the order the files
4604 appeared in the directory, resulting in needless rewriting
4608 *) Patches to make OpenSSL compile under Win32 again. Mostly
4609 work arounds for the VC++ problem that it treats func() as
4610 func(void). Also stripped out the parts of mkdef.pl that
4611 added extra typesafe functions: these no longer exist.
4614 *) Reorganisation of the stack code. The macros are now all
4615 collected in safestack.h . Each macro is defined in terms of
4616 a "stack macro" of the form SKM_<name>(type, a, b). The
4617 DEBUG_SAFESTACK is now handled in terms of function casts,
4618 this has the advantage of retaining type safety without the
4619 use of additional functions. If DEBUG_SAFESTACK is not defined
4620 then the non typesafe macros are used instead. Also modified the
4621 mkstack.pl script to handle the new form. Needs testing to see
4622 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
4623 the default if no major problems. Similar behaviour for ASN1_SET_OF
4624 and PKCS12_STACK_OF.
4627 *) When some versions of IIS use the 'NET' form of private key the
4628 key derivation algorithm is different. Normally MD5(password) is
4629 used as a 128 bit RC4 key. In the modified case
4630 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
4631 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
4632 as the old Netscape_RSA functions except they have an additional
4633 'sgckey' parameter which uses the modified algorithm. Also added
4634 an -sgckey command line option to the rsa utility. Thanks to
4635 Adrian Peck <bertie@ncipher.com> for posting details of the modified
4636 algorithm to openssl-dev.
4639 *) The evp_local.h macros were using 'c.##kname' which resulted in
4640 invalid expansion on some systems (SCO 5.0.5 for example).
4641 Corrected to 'c.kname'.
4642 [Phillip Porch <root@theporch.com>]
4644 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
4645 a STACK of email addresses from a certificate or request, these look
4646 in the subject name and the subject alternative name extensions and
4647 omit any duplicate addresses.
4650 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
4651 This makes DSA verification about 2 % faster.
4654 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
4655 (meaning that now 2^5 values will be precomputed, which is only 4 KB
4656 plus overhead for 1024 bit moduli).
4657 This makes exponentiations about 0.5 % faster for 1024 bit
4658 exponents (as measured by "openssl speed rsa2048").
4661 *) Rename memory handling macros to avoid conflicts with other
4663 Malloc => OPENSSL_malloc
4664 Malloc_locked => OPENSSL_malloc_locked
4665 Realloc => OPENSSL_realloc
4666 Free => OPENSSL_free
4669 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
4670 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
4673 *) CygWin32 support.
4674 [John Jarvie <jjarvie@newsguy.com>]
4676 *) The type-safe stack code has been rejigged. It is now only compiled
4677 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
4678 by default all type-specific stack functions are "#define"d back to
4679 standard stack functions. This results in more streamlined output
4680 but retains the type-safety checking possibilities of the original
4684 *) The STACK code has been cleaned up, and certain type declarations
4685 that didn't make a lot of sense have been brought in line. This has
4686 also involved a cleanup of sorts in safestack.h to more correctly
4687 map type-safe stack functions onto their plain stack counterparts.
4688 This work has also resulted in a variety of "const"ifications of
4689 lots of the code, especially "_cmp" operations which should normally
4690 be prototyped with "const" parameters anyway.
4693 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
4694 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
4695 (The PRNG state consists of two parts, the large pool 'state' and 'md',
4696 where all of 'md' is used each time the PRNG is used, but 'state'
4697 is used only indexed by a cyclic counter. As entropy may not be
4698 well distributed from the beginning, 'md' is important as a
4699 chaining variable. However, the output function chains only half
4700 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
4701 all of 'md', and seeding with STATE_SIZE dummy bytes will result
4702 in all of 'state' being rewritten, with the new values depending
4703 on virtually all of 'md'. This overcomes the 80 bit limitation.)
4706 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
4707 the handshake is continued after ssl_verify_cert_chain();
4708 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
4709 can lead to 'unexplainable' connection aborts later.
4710 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
4712 *) Major EVP API cipher revision.
4713 Add hooks for extra EVP features. This allows various cipher
4714 parameters to be set in the EVP interface. Support added for variable
4715 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
4716 setting of RC2 and RC5 parameters.
4718 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
4721 Remove lots of duplicated code from the EVP library. For example *every*
4722 cipher init() function handles the 'iv' in the same way according to the
4723 cipher mode. They also all do nothing if the 'key' parameter is NULL and
4724 for CFB and OFB modes they zero ctx->num.
4726 New functionality allows removal of S/MIME code RC2 hack.
4728 Most of the routines have the same form and so can be declared in terms
4731 By shifting this to the top level EVP_CipherInit() it can be removed from
4732 all individual ciphers. If the cipher wants to handle IVs or keys
4733 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
4736 Change lots of functions like EVP_EncryptUpdate() to now return a
4737 value: although software versions of the algorithms cannot fail
4738 any installed hardware versions can.
4741 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
4742 this option is set, tolerate broken clients that send the negotiated
4743 protocol version number instead of the requested protocol version
4747 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
4748 i.e. non-zero for export ciphersuites, zero otherwise.
4749 Previous versions had this flag inverted, inconsistent with
4750 rsa_tmp_cb (..._TMP_RSA_CB).
4751 [Bodo Moeller; problem reported by Amit Chopra]
4753 *) Add missing DSA library text string. Work around for some IIS
4754 key files with invalid SEQUENCE encoding.
4757 *) Add a document (doc/standards.txt) that list all kinds of standards
4758 and so on that are implemented in OpenSSL.
4761 *) Enhance c_rehash script. Old version would mishandle certificates
4762 with the same subject name hash and wouldn't handle CRLs at all.
4763 Added -fingerprint option to crl utility, to support new c_rehash
4767 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
4770 *) Fix for SSL server purpose checking. Server checking was
4771 rejecting certificates which had extended key usage present
4772 but no ssl client purpose.
4773 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
4775 *) Make PKCS#12 code work with no password. The PKCS#12 spec
4776 is a little unclear about how a blank password is handled.
4777 Since the password in encoded as a BMPString with terminating
4778 double NULL a zero length password would end up as just the
4779 double NULL. However no password at all is different and is
4780 handled differently in the PKCS#12 key generation code. NS
4781 treats a blank password as zero length. MSIE treats it as no
4782 password on export: but it will try both on import. We now do
4783 the same: PKCS12_parse() tries zero length and no password if
4784 the password is set to "" or NULL (NULL is now a valid password:
4785 it wasn't before) as does the pkcs12 application.
4788 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
4789 perror when PEM_read_bio_X509_REQ fails, the error message must
4790 be obtained from the error queue.
4793 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
4794 it in ERR_remove_state if appropriate, and change ERR_get_state
4795 accordingly to avoid race conditions (this is necessary because
4796 thread_hash is no longer constant once set).
4799 *) Bugfix for linux-elf makefile.one.
4802 *) RSA_get_default_method() will now cause a default
4803 RSA_METHOD to be chosen if one doesn't exist already.
4804 Previously this was only set during a call to RSA_new()
4805 or RSA_new_method(NULL) meaning it was possible for
4806 RSA_get_default_method() to return NULL.
4809 *) Added native name translation to the existing DSO code
4810 that will convert (if the flag to do so is set) filenames
4811 that are sufficiently small and have no path information
4812 into a canonical native form. Eg. "blah" converted to
4813 "libblah.so" or "blah.dll" etc.
4816 *) New function ERR_error_string_n(e, buf, len) which is like
4817 ERR_error_string(e, buf), but writes at most 'len' bytes
4818 including the 0 terminator. For ERR_error_string_n, 'buf'
4820 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
4822 *) CONF library reworked to become more general. A new CONF
4823 configuration file reader "class" is implemented as well as a
4824 new functions (NCONF_*, for "New CONF") to handle it. The now
4825 old CONF_* functions are still there, but are reimplemented to
4826 work in terms of the new functions. Also, a set of functions
4827 to handle the internal storage of the configuration data is
4828 provided to make it easier to write new configuration file
4829 reader "classes" (I can definitely see something reading a
4830 configuration file in XML format, for example), called _CONF_*,
4831 or "the configuration storage API"...
4833 The new configuration file reading functions are:
4835 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
4836 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
4838 NCONF_default, NCONF_WIN32
4840 NCONF_dump_fp, NCONF_dump_bio
4842 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
4843 NCONF_new creates a new CONF object. This works in the same way
4844 as other interfaces in OpenSSL, like the BIO interface.
4845 NCONF_dump_* dump the internal storage of the configuration file,
4846 which is useful for debugging. All other functions take the same
4847 arguments as the old CONF_* functions wth the exception of the
4848 first that must be a `CONF *' instead of a `LHASH *'.
4850 To make it easer to use the new classes with the old CONF_* functions,
4851 the function CONF_set_default_method is provided.
4854 *) Add '-tls1' option to 'openssl ciphers', which was already
4855 mentioned in the documentation but had not been implemented.
4856 (This option is not yet really useful because even the additional
4857 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
4860 *) Initial DSO code added into libcrypto for letting OpenSSL (and
4861 OpenSSL-based applications) load shared libraries and bind to
4862 them in a portable way.
4863 [Geoff Thorpe, with contributions from Richard Levitte]
4865 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
4867 *) Make sure _lrotl and _lrotr are only used with MSVC.
4869 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
4870 (the default implementation of RAND_status).
4872 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
4873 to '-clrext' (= clear extensions), as intended and documented.
4874 [Bodo Moeller; inconsistency pointed out by Michael Attili
4877 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
4878 was larger than the MD block size.
4879 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
4881 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
4882 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
4883 using the passed key: if the passed key was a private key the result
4884 of X509_print(), for example, would be to print out all the private key
4888 *) des_quad_cksum() byte order bug fix.
4889 [Ulf Möller, using the problem description in krb4-0.9.7, where
4890 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
4892 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
4894 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
4896 *) For easily testing in shell scripts whether some command
4897 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
4898 returns with exit code 0 iff no command of the given name is available.
4899 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
4900 the output goes to stdout and nothing is printed to stderr.
4901 Additional arguments are always ignored.
4903 Since for each cipher there is a command of the same name,
4904 the 'no-cipher' compilation switches can be tested this way.
4906 ('openssl no-XXX' is not able to detect pseudo-commands such
4907 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
4910 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
4913 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
4914 is set; it will be thrown away anyway because each handshake creates
4916 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
4917 to parameters -- in previous versions (since OpenSSL 0.9.3) the
4918 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
4919 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
4922 *) New s_client option -ign_eof: EOF at stdin is ignored, and
4923 'Q' and 'R' lose their special meanings (quit/renegotiate).
4924 This is part of what -quiet does; unlike -quiet, -ign_eof
4925 does not suppress any output.
4928 *) Add compatibility options to the purpose and trust code. The
4929 purpose X509_PURPOSE_ANY is "any purpose" which automatically
4930 accepts a certificate or CA, this was the previous behaviour,
4931 with all the associated security issues.
4933 X509_TRUST_COMPAT is the old trust behaviour: only and
4934 automatically trust self signed roots in certificate store. A
4935 new trust setting X509_TRUST_DEFAULT is used to specify that
4936 a purpose has no associated trust setting and it should instead
4937 use the value in the default purpose.
4940 *) Fix the PKCS#8 DSA private key code so it decodes keys again
4941 and fix a memory leak.
4944 *) In util/mkerr.pl (which implements 'make errors'), preserve
4945 reason strings from the previous version of the .c file, as
4946 the default to have only downcase letters (and digits) in
4947 automatically generated reasons codes is not always appropriate.
4950 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
4951 using strerror. Previously, ERR_reason_error_string() returned
4952 library names as reason strings for SYSerr; but SYSerr is a special
4953 case where small numbers are errno values, not library numbers.
4956 *) Add '-dsaparam' option to 'openssl dhparam' application. This
4957 converts DSA parameters into DH parameters. (When creating parameters,
4958 DSA_generate_parameters is used.)
4961 *) Include 'length' (recommended exponent length) in C code generated
4962 by 'openssl dhparam -C'.
4965 *) The second argument to set_label in perlasm was already being used
4966 so couldn't be used as a "file scope" flag. Moved to third argument
4970 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
4971 instead of RAND_bytes for encryption IVs and salts.
4974 *) Include RAND_status() into RAND_METHOD instead of implementing
4975 it only for md_rand.c Otherwise replacing the PRNG by calling
4976 RAND_set_rand_method would be impossible.
4979 *) Don't let DSA_generate_key() enter an infinite loop if the random
4980 number generation fails.
4983 *) New 'rand' application for creating pseudo-random output.
4986 *) Added configuration support for Linux/IA64
4987 [Rolf Haberrecker <rolf@suse.de>]
4989 *) Assembler module support for Mingw32.
4992 *) Shared library support for HPUX (in shlib/).
4993 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
4995 *) Shared library support for Solaris gcc.
4996 [Lutz Behnke <behnke@trustcenter.de>]
4998 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
5000 *) PKCS7_encrypt() was adding text MIME headers twice because they
5001 were added manually and by SMIME_crlf_copy().
5004 *) In bntest.c don't call BN_rand with zero bits argument.
5005 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
5007 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
5008 case was implemented. This caused BN_div_recp() to fail occasionally.
5011 *) Add an optional second argument to the set_label() in the perl
5012 assembly language builder. If this argument exists and is set
5013 to 1 it signals that the assembler should use a symbol whose
5014 scope is the entire file, not just the current function. This
5015 is needed with MASM which uses the format label:: for this scope.
5016 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
5018 *) Change the ASN1 types so they are typedefs by default. Before
5019 almost all types were #define'd to ASN1_STRING which was causing
5020 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
5024 *) Change names of new functions to the new get1/get0 naming
5025 convention: After 'get1', the caller owns a reference count
5026 and has to call ..._free; 'get0' returns a pointer to some
5027 data structure without incrementing reference counters.
5028 (Some of the existing 'get' functions increment a reference
5029 counter, some don't.)
5030 Similarly, 'set1' and 'add1' functions increase reference
5031 counters or duplicate objects.
5034 *) Allow for the possibility of temp RSA key generation failure:
5035 the code used to assume it always worked and crashed on failure.
5038 *) Fix potential buffer overrun problem in BIO_printf().
5039 [Ulf Möller, using public domain code by Patrick Powell; problem
5040 pointed out by David Sacerdote <das33@cornell.edu>]
5042 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
5043 RAND_egd() and RAND_status(). In the command line application,
5044 the EGD socket can be specified like a seed file using RANDFILE
5048 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
5049 Some CAs (e.g. Verisign) distribute certificates in this form.
5052 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
5053 list to exclude them. This means that no special compilation option
5054 is needed to use anonymous DH: it just needs to be included in the
5058 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
5059 EVP_MD_type. The old functionality is available in a new macro called
5060 EVP_MD_md(). Change code that uses it and update docs.
5063 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
5064 where the 'void *' argument is replaced by a function pointer argument.
5065 Previously 'void *' was abused to point to functions, which works on
5066 many platforms, but is not correct. As these functions are usually
5067 called by macros defined in OpenSSL header files, most source code
5068 should work without changes.
5071 *) <openssl/opensslconf.h> (which is created by Configure) now contains
5072 sections with information on -D... compiler switches used for
5073 compiling the library so that applications can see them. To enable
5074 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
5075 must be defined. E.g.,
5076 #define OPENSSL_ALGORITHM_DEFINES
5077 #include <openssl/opensslconf.h>
5078 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
5079 [Richard Levitte, Ulf and Bodo Möller]
5081 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
5085 *) Change the 'other' type in certificate aux info to a STACK_OF
5086 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
5087 the required ASN1 format: arbitrary types determined by an OID.
5090 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
5091 argument to 'req'. This is not because the function is newer or
5092 better than others it just uses the work 'NEW' in the certificate
5093 request header lines. Some software needs this.
5096 *) Reorganise password command line arguments: now passwords can be
5097 obtained from various sources. Delete the PEM_cb function and make
5098 it the default behaviour: i.e. if the callback is NULL and the
5099 usrdata argument is not NULL interpret it as a null terminated pass
5100 phrase. If usrdata and the callback are NULL then the pass phrase
5101 is prompted for as usual.
5104 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
5105 the support is automatically enabled. The resulting binaries will
5106 autodetect the card and use it if present.
5107 [Ben Laurie and Compaq Inc.]
5109 *) Work around for Netscape hang bug. This sends certificate request
5110 and server done in one record. Since this is perfectly legal in the
5111 SSL/TLS protocol it isn't a "bug" option and is on by default. See
5112 the bugs/SSLv3 entry for more info.
5115 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
5118 *) Add -rand argument to smime and pkcs12 applications and read/write
5122 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
5125 *) Add command line password options to the remaining applications.
5128 *) Bug fix for BN_div_recp() for numerators with an even number of
5132 *) More tests in bntest.c, and changed test_bn output.
5135 *) ./config recognizes MacOS X now.
5138 *) Bug fix for BN_div() when the first words of num and divsor are
5139 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
5142 *) Add support for various broken PKCS#8 formats, and command line
5143 options to produce them.
5146 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
5147 get temporary BIGNUMs from a BN_CTX.
5150 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
5154 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
5155 include a #define from the old name to the new. The original intent
5156 was that statically linked binaries could for example just call
5157 SSLeay_add_all_ciphers() to just add ciphers to the table and not
5158 link with digests. This never worked becayse SSLeay_add_all_digests()
5159 and SSLeay_add_all_ciphers() were in the same source file so calling
5160 one would link with the other. They are now in separate source files.
5163 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
5166 *) Use a less unusual form of the Miller-Rabin primality test (it used
5167 a binary algorithm for exponentiation integrated into the Miller-Rabin
5168 loop, our standard modexp algorithms are faster).
5171 *) Support for the EBCDIC character set completed.
5172 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
5174 *) Source code cleanups: use const where appropriate, eliminate casts,
5175 use void * instead of char * in lhash.
5178 *) Bugfix: ssl3_send_server_key_exchange was not restartable
5179 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
5180 this the server could overwrite ephemeral keys that the client
5184 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
5185 using 50 iterations of the Rabin-Miller test.
5187 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
5188 iterations of the Rabin-Miller test as required by the appendix
5189 to FIPS PUB 186[-1]) instead of DSA_is_prime.
5190 As BN_is_prime_fasttest includes trial division, DSA parameter
5191 generation becomes much faster.
5193 This implies a change for the callback functions in DSA_is_prime
5194 and DSA_generate_parameters: The callback function is called once
5195 for each positive witness in the Rabin-Miller test, not just
5196 occasionally in the inner loop; and the parameters to the
5197 callback function now provide an iteration count for the outer
5198 loop rather than for the current invocation of the inner loop.
5199 DSA_generate_parameters additionally can call the callback
5200 function with an 'iteration count' of -1, meaning that a
5201 candidate has passed the trial division test (when q is generated
5202 from an application-provided seed, trial division is skipped).
5205 *) New function BN_is_prime_fasttest that optionally does trial
5206 division before starting the Rabin-Miller test and has
5207 an additional BN_CTX * argument (whereas BN_is_prime always
5208 has to allocate at least one BN_CTX).
5209 'callback(1, -1, cb_arg)' is called when a number has passed the
5210 trial division stage.
5213 *) Fix for bug in CRL encoding. The validity dates weren't being handled
5217 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
5220 *) New function BN_pseudo_rand().
5223 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
5224 bignum version of BN_from_montgomery() with the working code from
5225 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
5229 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
5230 made it impossible to use the same SSL_SESSION data structure in
5231 SSL2 clients in multiple threads.
5234 *) The return value of RAND_load_file() no longer counts bytes obtained
5235 by stat(). RAND_load_file(..., -1) is new and uses the complete file
5236 to seed the PRNG (previously an explicit byte count was required).
5237 [Ulf Möller, Bodo Möller]
5239 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
5240 used (char *) instead of (void *) and had casts all over the place.
5243 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
5246 *) Retain source code compatibility for BN_prime_checks macro:
5247 BN_is_prime(..., BN_prime_checks, ...) now uses
5248 BN_prime_checks_for_size to determine the appropriate number of
5249 Rabin-Miller iterations.
5252 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
5253 DH_CHECK_P_NOT_SAFE_PRIME.
5254 (Check if this is true? OpenPGP calls them "strong".)
5257 *) Merge the functionality of "dh" and "gendh" programs into a new program
5258 "dhparam". The old programs are retained for now but will handle DH keys
5259 (instead of parameters) in future.
5262 *) Make the ciphers, s_server and s_client programs check the return values
5263 when a new cipher list is set.
5266 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
5267 ciphers. Before when the 56bit ciphers were enabled the sorting was
5270 The syntax for the cipher sorting has been extended to support sorting by
5271 cipher-strength (using the strength_bits hard coded in the tables).
5272 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
5274 Fix a bug in the cipher-command parser: when supplying a cipher command
5275 string with an "undefined" symbol (neither command nor alphanumeric
5276 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
5277 an error is flagged.
5279 Due to the strength-sorting extension, the code of the
5280 ssl_create_cipher_list() function was completely rearranged. I hope that
5281 the readability was also increased :-)
5282 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
5284 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
5285 for the first serial number and places 2 in the serial number file. This
5286 avoids problems when the root CA is created with serial number zero and
5287 the first user certificate has the same issuer name and serial number
5291 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
5292 the new code. Add documentation for this stuff.
5295 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
5296 X509_*() to X509at_*() on the grounds that they don't handle X509
5297 structures and behave in an analagous way to the X509v3 functions:
5298 they shouldn't be called directly but wrapper functions should be used
5301 So we also now have some wrapper functions that call the X509at functions
5302 when passed certificate requests. (TO DO: similar things can be done with
5303 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
5304 things. Some of these need some d2i or i2d and print functionality
5305 because they handle more complex structures.)
5308 *) Add missing #ifndefs that caused missing symbols when building libssl
5309 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
5310 NO_RSA in ssl/s2*.c.
5311 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
5313 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
5314 has a return value which indicates the quality of the random data
5315 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
5316 error queue. New function RAND_pseudo_bytes() generates output that is
5317 guaranteed to be unique but not unpredictable. RAND_add is like
5318 RAND_seed, but takes an extra argument for an entropy estimate
5319 (RAND_seed always assumes full entropy).
5322 *) Do more iterations of Rabin-Miller probable prime test (specifically,
5323 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
5324 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
5325 in crypto/bn/bn_prime.c for the complete table). This guarantees a
5326 false-positive rate of at most 2^-80 for random input.
5329 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
5332 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
5333 in the 0.9.5 release), this returns the chain
5334 from an X509_CTX structure with a dup of the stack and all
5335 the X509 reference counts upped: so the stack will exist
5336 after X509_CTX_cleanup() has been called. Modify pkcs12.c
5339 Also make SSL_SESSION_print() print out the verify return
5343 *) Add manpage for the pkcs12 command. Also change the default
5344 behaviour so MAC iteration counts are used unless the new
5345 -nomaciter option is used. This improves file security and
5346 only older versions of MSIE (4.0 for example) need it.
5349 *) Honor the no-xxx Configure options when creating .DEF files.
5352 *) Add PKCS#10 attributes to field table: challengePassword,
5353 unstructuredName and unstructuredAddress. These are taken from
5354 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
5355 international characters are used.
5357 More changes to X509_ATTRIBUTE code: allow the setting of types
5358 based on strings. Remove the 'loc' parameter when adding
5359 attributes because these will be a SET OF encoding which is sorted
5363 *) Initial changes to the 'req' utility to allow request generation
5364 automation. This will allow an application to just generate a template
5365 file containing all the field values and have req construct the
5368 Initial support for X509_ATTRIBUTE handling. Stacks of these are
5369 used all over the place including certificate requests and PKCS#7
5370 structures. They are currently handled manually where necessary with
5371 some primitive wrappers for PKCS#7. The new functions behave in a
5372 manner analogous to the X509 extension functions: they allow
5373 attributes to be looked up by NID and added.
5375 Later something similar to the X509V3 code would be desirable to
5376 automatically handle the encoding, decoding and printing of the
5377 more complex types. The string types like challengePassword can
5378 be handled by the string table functions.
5380 Also modified the multi byte string table handling. Now there is
5381 a 'global mask' which masks out certain types. The table itself
5382 can use the flag STABLE_NO_MASK to ignore the mask setting: this
5383 is useful when for example there is only one permissible type
5384 (as in countryName) and using the mask might result in no valid
5388 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
5389 SSL_get_peer_finished to allow applications to obtain the latest
5390 Finished messages sent to the peer or expected from the peer,
5391 respectively. (SSL_get_peer_finished is usually the Finished message
5392 actually received from the peer, otherwise the protocol will be aborted.)
5394 As the Finished message are message digests of the complete handshake
5395 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
5396 be used for external authentication procedures when the authentication
5397 provided by SSL/TLS is not desired or is not enough.
5400 *) Enhanced support for Alpha Linux is added. Now ./config checks if
5401 the host supports BWX extension and if Compaq C is present on the
5402 $PATH. Just exploiting of the BWX extension results in 20-30%
5403 performance kick for some algorithms, e.g. DES and RC4 to mention
5404 a couple. Compaq C in turn generates ~20% faster code for MD5 and
5408 *) Add support for MS "fast SGC". This is arguably a violation of the
5409 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
5410 weak crypto and after checking the certificate is SGC a second one
5411 with strong crypto. MS SGC stops the first handshake after receiving
5412 the server certificate message and sends a second client hello. Since
5413 a server will typically do all the time consuming operations before
5414 expecting any further messages from the client (server key exchange
5415 is the most expensive) there is little difference between the two.
5417 To get OpenSSL to support MS SGC we have to permit a second client
5418 hello message after we have sent server done. In addition we have to
5419 reset the MAC if we do get this second client hello.
5422 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
5423 if a DER encoded private key is RSA or DSA traditional format. Changed
5424 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
5425 format DER encoded private key. Newer code should use PKCS#8 format which
5426 has the key type encoded in the ASN1 structure. Added DER private key
5427 support to pkcs8 application.
5430 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
5431 ciphersuites has been selected (as required by the SSL 3/TLS 1
5432 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
5433 is set, we interpret this as a request to violate the specification
5434 (the worst that can happen is a handshake failure, and 'correct'
5435 behaviour would result in a handshake failure anyway).
5438 *) In SSL_CTX_add_session, take into account that there might be multiple
5439 SSL_SESSION structures with the same session ID (e.g. when two threads
5440 concurrently obtain them from an external cache).
5441 The internal cache can handle only one SSL_SESSION with a given ID,
5442 so if there's a conflict, we now throw out the old one to achieve
5446 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
5447 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
5448 some routines that use cipher OIDs: some ciphers do not have OIDs
5449 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
5453 *) Simplify the trust setting structure and code. Now we just have
5454 two sequences of OIDs for trusted and rejected settings. These will
5455 typically have values the same as the extended key usage extension
5456 and any application specific purposes.
5458 The trust checking code now has a default behaviour: it will just
5459 check for an object with the same NID as the passed id. Functions can
5460 be provided to override either the default behaviour or the behaviour
5461 for a given id. SSL client, server and email already have functions
5462 in place for compatibility: they check the NID and also return "trusted"
5463 if the certificate is self signed.
5466 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
5467 traditional format into an EVP_PKEY structure.
5470 *) Add a password callback function PEM_cb() which either prompts for
5471 a password if usr_data is NULL or otherwise assumes it is a null
5472 terminated password. Allow passwords to be passed on command line
5473 environment or config files in a few more utilities.
5476 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
5477 keys. Add some short names for PKCS#8 PBE algorithms and allow them
5478 to be specified on the command line for the pkcs8 and pkcs12 utilities.
5479 Update documentation.
5482 *) Support for ASN1 "NULL" type. This could be handled before by using
5483 ASN1_TYPE but there wasn't any function that would try to read a NULL
5484 and produce an error if it couldn't. For compatibility we also have
5485 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
5486 don't allocate anything because they don't need to.
5489 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
5491 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
5493 *) Rebuild of the memory allocation routines used by OpenSSL code and
5494 possibly others as well. The purpose is to make an interface that
5495 provide hooks so anyone can build a separate set of allocation and
5496 deallocation routines to be used by OpenSSL, for example memory
5497 pool implementations, or something else, which was previously hard
5498 since Malloc(), Realloc() and Free() were defined as macros having
5499 the values malloc, realloc and free, respectively (except for Win32
5500 compilations). The same is provided for memory debugging code.
5501 OpenSSL already comes with functionality to find memory leaks, but
5502 this gives people a chance to debug other memory problems.
5504 With these changes, a new set of functions and macros have appeared:
5506 CRYPTO_set_mem_debug_functions() [F]
5507 CRYPTO_get_mem_debug_functions() [F]
5508 CRYPTO_dbg_set_options() [F]
5509 CRYPTO_dbg_get_options() [F]
5510 CRYPTO_malloc_debug_init() [M]
5512 The memory debug functions are NULL by default, unless the library
5513 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
5514 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
5515 gives the standard debugging functions that come with OpenSSL) or
5516 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
5517 provided by the library user) must be used. When the standard
5518 debugging functions are used, CRYPTO_dbg_set_options can be used to
5519 request additional information:
5520 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
5521 the CRYPTO_MDEBUG_xxx macro when compiling the library.
5523 Also, things like CRYPTO_set_mem_functions will always give the
5524 expected result (the new set of functions is used for allocation
5525 and deallocation) at all times, regardless of platform and compiler
5528 To finish it up, some functions that were never use in any other
5529 way than through macros have a new API and new semantic:
5532 CRYPTO_dbg_realloc()
5535 All macros of value have retained their old syntax.
5536 [Richard Levitte and Bodo Moeller]
5538 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
5539 ordering of SMIMECapabilities wasn't in "strength order" and there
5540 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
5544 *) Some ASN1 types with illegal zero length encoding (INTEGER,
5545 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
5546 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
5548 *) Merge in my S/MIME library for OpenSSL. This provides a simple
5549 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
5550 functionality to handle multipart/signed properly) and a utility
5551 called 'smime' to call all this stuff. This is based on code I
5552 originally wrote for Celo who have kindly allowed it to be
5553 included in OpenSSL.
5556 *) Add variants des_set_key_checked and des_set_key_unchecked of
5557 des_set_key (aka des_key_sched). Global variable des_check_key
5558 decides which of these is called by des_set_key; this way
5559 des_check_key behaves as it always did, but applications and
5560 the library itself, which was buggy for des_check_key == 1,
5561 have a cleaner way to pick the version they need.
5564 *) New function PKCS12_newpass() which changes the password of a
5568 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
5569 dynamic mix. In both cases the ids can be used as an index into the
5570 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
5571 functions so they accept a list of the field values and the
5572 application doesn't need to directly manipulate the X509_TRUST
5576 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
5580 *) Modify the way the V3 extension code looks up extensions. This now
5581 works in a similar way to the object code: we have some "standard"
5582 extensions in a static table which is searched with OBJ_bsearch()
5583 and the application can add dynamic ones if needed. The file
5584 crypto/x509v3/ext_dat.h now has the info: this file needs to be
5585 updated whenever a new extension is added to the core code and kept
5586 in ext_nid order. There is a simple program 'tabtest.c' which checks
5587 this. New extensions are not added too often so this file can readily
5588 be maintained manually.
5590 There are two big advantages in doing things this way. The extensions
5591 can be looked up immediately and no longer need to be "added" using
5592 X509V3_add_standard_extensions(): this function now does nothing.
5593 [Side note: I get *lots* of email saying the extension code doesn't
5594 work because people forget to call this function]
5595 Also no dynamic allocation is done unless new extensions are added:
5596 so if we don't add custom extensions there is no need to call
5597 X509V3_EXT_cleanup().
5600 *) Modify enc utility's salting as follows: make salting the default. Add a
5601 magic header, so unsalted files fail gracefully instead of just decrypting
5602 to garbage. This is because not salting is a big security hole, so people
5603 should be discouraged from doing it.
5606 *) Fixes and enhancements to the 'x509' utility. It allowed a message
5607 digest to be passed on the command line but it only used this
5608 parameter when signing a certificate. Modified so all relevant
5609 operations are affected by the digest parameter including the
5610 -fingerprint and -x509toreq options. Also -x509toreq choked if a
5611 DSA key was used because it didn't fix the digest.
5614 *) Initial certificate chain verify code. Currently tests the untrusted
5615 certificates for consistency with the verify purpose (which is set
5616 when the X509_STORE_CTX structure is set up) and checks the pathlength.
5618 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
5619 this is because it will reject chains with invalid extensions whereas
5620 every previous version of OpenSSL and SSLeay made no checks at all.
5622 Trust code: checks the root CA for the relevant trust settings. Trust
5623 settings have an initial value consistent with the verify purpose: e.g.
5624 if the verify purpose is for SSL client use it expects the CA to be
5625 trusted for SSL client use. However the default value can be changed to
5626 permit custom trust settings: one example of this would be to only trust
5627 certificates from a specific "secure" set of CAs.
5629 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
5630 which should be used for version portability: especially since the
5631 verify structure is likely to change more often now.
5633 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
5634 to set them. If not set then assume SSL clients will verify SSL servers
5637 Two new options to the verify program: -untrusted allows a set of
5638 untrusted certificates to be passed in and -purpose which sets the
5639 intended purpose of the certificate. If a purpose is set then the
5640 new chain verify code is used to check extension consistency.
5643 *) Support for the authority information access extension.
5646 *) Modify RSA and DSA PEM read routines to transparently handle
5647 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
5648 public keys in a format compatible with certificate
5649 SubjectPublicKeyInfo structures. Unfortunately there were already
5650 functions called *_PublicKey_* which used various odd formats so
5651 these are retained for compatibility: however the DSA variants were
5652 never in a public release so they have been deleted. Changed dsa/rsa
5653 utilities to handle the new format: note no releases ever handled public
5654 keys so we should be OK.
5656 The primary motivation for this change is to avoid the same fiasco
5657 that dogs private keys: there are several incompatible private key
5658 formats some of which are standard and some OpenSSL specific and
5659 require various evil hacks to allow partial transparent handling and
5660 even then it doesn't work with DER formats. Given the option anything
5661 other than PKCS#8 should be dumped: but the other formats have to
5662 stay in the name of compatibility.
5664 With public keys and the benefit of hindsight one standard format
5665 is used which works with EVP_PKEY, RSA or DSA structures: though
5666 it clearly returns an error if you try to read the wrong kind of key.
5668 Added a -pubkey option to the 'x509' utility to output the public key.
5669 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
5670 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
5671 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
5672 that do the same as the EVP_PKEY_assign_*() except they up the
5673 reference count of the added key (they don't "swallow" the
5677 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
5678 CRLs would fail if the file contained no certificates or no CRLs:
5679 added a new function to read in both types and return the number
5680 read: this means that if none are read it will be an error. The
5681 DER versions of the certificate and CRL reader would always fail
5682 because it isn't possible to mix certificates and CRLs in DER format
5683 without choking one or the other routine. Changed this to just read
5684 a certificate: this is the best we can do. Also modified the code
5685 in apps/verify.c to take notice of return codes: it was previously
5686 attempting to read in certificates from NULL pointers and ignoring
5687 any errors: this is one reason why the cert and CRL reader seemed
5688 to work. It doesn't check return codes from the default certificate
5689 routines: these may well fail if the certificates aren't installed.
5692 *) Code to support otherName option in GeneralName.
5695 *) First update to verify code. Change the verify utility
5696 so it warns if it is passed a self signed certificate:
5697 for consistency with the normal behaviour. X509_verify
5698 has been modified to it will now verify a self signed
5699 certificate if *exactly* the same certificate appears
5700 in the store: it was previously impossible to trust a
5701 single self signed certificate. This means that:
5702 openssl verify ss.pem
5703 now gives a warning about a self signed certificate but
5704 openssl verify -CAfile ss.pem ss.pem
5708 *) For servers, store verify_result in SSL_SESSION data structure
5709 (and add it to external session representation).
5710 This is needed when client certificate verifications fails,
5711 but an application-provided verification callback (set by
5712 SSL_CTX_set_cert_verify_callback) allows accepting the session
5713 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
5714 but returns 1): When the session is reused, we have to set
5715 ssl->verify_result to the appropriate error code to avoid
5717 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
5719 *) Fix a bug in the new PKCS#7 code: it didn't consider the
5720 case in PKCS7_dataInit() where the signed PKCS7 structure
5721 didn't contain any existing data because it was being created.
5722 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
5724 *) Add a salt to the key derivation routines in enc.c. This
5725 forms the first 8 bytes of the encrypted file. Also add a
5726 -S option to allow a salt to be input on the command line.
5729 *) New function X509_cmp(). Oddly enough there wasn't a function
5730 to compare two certificates. We do this by working out the SHA1
5731 hash and comparing that. X509_cmp() will be needed by the trust
5735 *) SSL_get1_session() is like SSL_get_session(), but increments
5736 the reference count in the SSL_SESSION returned.
5737 [Geoff Thorpe <geoff@eu.c2.net>]
5739 *) Fix for 'req': it was adding a null to request attributes.
5740 Also change the X509_LOOKUP and X509_INFO code to handle
5741 certificate auxiliary information.
5744 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
5748 *) Add the possibility to add extra information to the memory leak
5749 detecting output, to form tracebacks, showing from where each
5750 allocation was originated: CRYPTO_push_info("constant string") adds
5751 the string plus current file name and line number to a per-thread
5752 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
5753 is like calling CYRPTO_pop_info() until the stack is empty.
5754 Also updated memory leak detection code to be multi-thread-safe.
5757 *) Add options -text and -noout to pkcs7 utility and delete the
5758 encryption options which never did anything. Update docs.
5761 *) Add options to some of the utilities to allow the pass phrase
5762 to be included on either the command line (not recommended on
5763 OSes like Unix) or read from the environment. Update the
5764 manpages and fix a few bugs.
5767 *) Add a few manpages for some of the openssl commands.
5770 *) Fix the -revoke option in ca. It was freeing up memory twice,
5771 leaking and not finding already revoked certificates.
5774 *) Extensive changes to support certificate auxiliary information.
5775 This involves the use of X509_CERT_AUX structure and X509_AUX
5776 functions. An X509_AUX function such as PEM_read_X509_AUX()
5777 can still read in a certificate file in the usual way but it
5778 will also read in any additional "auxiliary information". By
5779 doing things this way a fair degree of compatibility can be
5780 retained: existing certificates can have this information added
5781 using the new 'x509' options.
5783 Current auxiliary information includes an "alias" and some trust
5784 settings. The trust settings will ultimately be used in enhanced
5785 certificate chain verification routines: currently a certificate
5786 can only be trusted if it is self signed and then it is trusted
5790 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
5791 The problem was that one of the replacement routines had not been working
5792 since SSLeay releases. For now the offending routine has been replaced
5793 with non-optimised assembler. Even so, this now gives around 95%
5794 performance improvement for 1024 bit RSA signs.
5797 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
5798 handling. Most clients have the effective key size in bits equal to
5799 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
5800 A few however don't do this and instead use the size of the decrypted key
5801 to determine the RC2 key length and the AlgorithmIdentifier to determine
5802 the effective key length. In this case the effective key length can still
5803 be 40 bits but the key length can be 168 bits for example. This is fixed
5804 by manually forcing an RC2 key into the EVP_PKEY structure because the
5805 EVP code can't currently handle unusual RC2 key sizes: it always assumes
5806 the key length and effective key length are equal.
5809 *) Add a bunch of functions that should simplify the creation of
5810 X509_NAME structures. Now you should be able to do:
5811 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
5812 and have it automatically work out the correct field type and fill in
5813 the structures. The more adventurous can try:
5814 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
5815 and it will (hopefully) work out the correct multibyte encoding.
5818 *) Change the 'req' utility to use the new field handling and multibyte
5819 copy routines. Before the DN field creation was handled in an ad hoc
5820 way in req, ca, and x509 which was rather broken and didn't support
5821 BMPStrings or UTF8Strings. Since some software doesn't implement
5822 BMPStrings or UTF8Strings yet, they can be enabled using the config file
5823 using the dirstring_type option. See the new comment in the default
5824 openssl.cnf for more info.
5827 *) Make crypto/rand/md_rand.c more robust:
5828 - Assure unique random numbers after fork().
5829 - Make sure that concurrent threads access the global counter and
5830 md serializably so that we never lose entropy in them
5831 or use exactly the same state in multiple threads.
5832 Access to the large state is not always serializable because
5833 the additional locking could be a performance killer, and
5834 md should be large enough anyway.
5837 *) New file apps/app_rand.c with commonly needed functionality
5838 for handling the random seed file.
5840 Use the random seed file in some applications that previously did not:
5842 dsaparam -genkey (which also ignored its '-rand' option),
5845 x509 (when signing).
5846 Except on systems with /dev/urandom, it is crucial to have a random
5847 seed file at least for key creation, DSA signing, and for DH exchanges;
5848 for RSA signatures we could do without one.
5850 gendh and gendsa (unlike genrsa) used to read only the first byte
5851 of each file listed in the '-rand' option. The function as previously
5852 found in genrsa is now in app_rand.c and is used by all programs
5853 that support '-rand'.
5856 *) In RAND_write_file, use mode 0600 for creating files;
5857 don't just chmod when it may be too late.
5860 *) Report an error from X509_STORE_load_locations
5861 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
5864 *) New function ASN1_mbstring_copy() this copies a string in either
5865 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
5866 into an ASN1_STRING type. A mask of permissible types is passed
5867 and it chooses the "minimal" type to use or an error if not type
5871 *) Add function equivalents to the various macros in asn1.h. The old
5872 macros are retained with an M_ prefix. Code inside the library can
5873 use the M_ macros. External code (including the openssl utility)
5874 should *NOT* in order to be "shared library friendly".
5877 *) Add various functions that can check a certificate's extensions
5878 to see if it usable for various purposes such as SSL client,
5879 server or S/MIME and CAs of these types. This is currently
5880 VERY EXPERIMENTAL but will ultimately be used for certificate chain
5881 verification. Also added a -purpose flag to x509 utility to
5882 print out all the purposes.
5885 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
5889 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
5890 for, obtain and decode and extension and obtain its critical flag.
5891 This allows all the necessary extension code to be handled in a
5892 single function call.
5895 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
5896 platforms. See crypto/rc4/rc4_enc.c for further details.
5899 *) New -noout option to asn1parse. This causes no output to be produced
5900 its main use is when combined with -strparse and -out to extract data
5901 from a file (which may not be in ASN.1 format).
5904 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
5905 when producing the local key id.
5906 [Richard Levitte <levitte@stacken.kth.se>]
5908 *) New option -dhparam in s_server. This allows a DH parameter file to be
5909 stated explicitly. If it is not stated then it tries the first server
5910 certificate file. The previous behaviour hard coded the filename
5914 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
5915 a public key to be input or output. For example:
5916 openssl rsa -in key.pem -pubout -out pubkey.pem
5917 Also added necessary DSA public key functions to handle this.
5920 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
5921 in the message. This was handled by allowing
5922 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
5923 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
5925 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
5926 to the end of the strings whereas this didn't. This would cause problems
5927 if strings read with d2i_ASN1_bytes() were later modified.
5928 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
5930 *) Fix for base64 decode bug. When a base64 bio reads only one line of
5931 data and it contains EOF it will end up returning an error. This is
5932 caused by input 46 bytes long. The cause is due to the way base64
5933 BIOs find the start of base64 encoded data. They do this by trying a
5934 trial decode on each line until they find one that works. When they
5935 do a flag is set and it starts again knowing it can pass all the
5936 data directly through the decoder. Unfortunately it doesn't reset
5937 the context it uses. This means that if EOF is reached an attempt
5938 is made to pass two EOFs through the context and this causes the
5939 resulting error. This can also cause other problems as well. As is
5940 usual with these problems it takes *ages* to find and the fix is
5941 trivial: move one line.
5942 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
5944 *) Ugly workaround to get s_client and s_server working under Windows. The
5945 old code wouldn't work because it needed to select() on sockets and the
5946 tty (for keypresses and to see if data could be written). Win32 only
5947 supports select() on sockets so we select() with a 1s timeout on the
5948 sockets and then see if any characters are waiting to be read, if none
5949 are present then we retry, we also assume we can always write data to
5950 the tty. This isn't nice because the code then blocks until we've
5951 received a complete line of data and it is effectively polling the
5952 keyboard at 1s intervals: however it's quite a bit better than not
5953 working at all :-) A dedicated Windows application might handle this
5954 with an event loop for example.
5957 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
5958 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
5959 will be called when RSA_sign() and RSA_verify() are used. This is useful
5960 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
5961 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
5962 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
5963 This necessitated the support of an extra signature type NID_md5_sha1
5964 for SSL signatures and modifications to the SSL library to use it instead
5965 of calling RSA_public_decrypt() and RSA_private_encrypt().
5968 *) Add new -verify -CAfile and -CApath options to the crl program, these
5969 will lookup a CRL issuers certificate and verify the signature in a
5970 similar way to the verify program. Tidy up the crl program so it
5971 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
5972 less strict. It will now permit CRL extensions even if it is not
5973 a V2 CRL: this will allow it to tolerate some broken CRLs.
5976 *) Initialize all non-automatic variables each time one of the openssl
5977 sub-programs is started (this is necessary as they may be started
5978 multiple times from the "OpenSSL>" prompt).
5979 [Lennart Bang, Bodo Moeller]
5981 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
5982 removing all other RSA functionality (this is what NO_RSA does). This
5983 is so (for example) those in the US can disable those operations covered
5984 by the RSA patent while allowing storage and parsing of RSA keys and RSA
5988 *) Non-copying interface to BIO pairs.
5989 (still largely untested)
5992 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
5993 ASCII string. This was handled independently in various places before.
5996 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
5997 UTF8 strings a character at a time.
6000 *) Use client_version from client hello to select the protocol
6001 (s23_srvr.c) and for RSA client key exchange verification
6002 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
6005 *) Add various utility functions to handle SPKACs, these were previously
6006 handled by poking round in the structure internals. Added new function
6007 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
6008 print, verify and generate SPKACs. Based on an original idea from
6009 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
6012 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
6015 *) Allow the config file extension section to be overwritten on the
6016 command line. Based on an original idea from Massimiliano Pala
6017 <madwolf@comune.modena.it>. The new option is called -extensions
6018 and can be applied to ca, req and x509. Also -reqexts to override
6019 the request extensions in req and -crlexts to override the crl extensions
6023 *) Add new feature to the SPKAC handling in ca. Now you can include
6024 the same field multiple times by preceding it by "XXXX." for example:
6027 this is the same syntax as used in the req config file.
6030 *) Allow certificate extensions to be added to certificate requests. These
6031 are specified in a 'req_extensions' option of the req section of the
6032 config file. They can be printed out with the -text option to req but
6033 are otherwise ignored at present.
6036 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
6037 data read consists of only the final block it would not decrypted because
6038 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
6039 A misplaced 'break' also meant the decrypted final block might not be
6040 copied until the next read.
6043 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
6044 a few extra parameters to the DH structure: these will be useful if
6045 for example we want the value of 'q' or implement X9.42 DH.
6048 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
6049 provides hooks that allow the default DSA functions or functions on a
6050 "per key" basis to be replaced. This allows hardware acceleration and
6051 hardware key storage to be handled without major modification to the
6052 library. Also added low level modexp hooks and CRYPTO_EX structure and
6053 associated functions.
6056 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
6057 as "read only": it can't be written to and the buffer it points to will
6058 not be freed. Reading from a read only BIO is much more efficient than
6059 a normal memory BIO. This was added because there are several times when
6060 an area of memory needs to be read from a BIO. The previous method was
6061 to create a memory BIO and write the data to it, this results in two
6062 copies of the data and an O(n^2) reading algorithm. There is a new
6063 function BIO_new_mem_buf() which creates a read only memory BIO from
6064 an area of memory. Also modified the PKCS#7 routines to use read only
6068 *) Bugfix: ssl23_get_client_hello did not work properly when called in
6069 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
6070 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
6071 but a retry condition occured while trying to read the rest.
6074 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
6075 NID_pkcs7_encrypted by default: this was wrong since this should almost
6076 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
6077 the encrypted data type: this is a more sensible place to put it and it
6078 allows the PKCS#12 code to be tidied up that duplicated this
6082 *) Changed obj_dat.pl script so it takes its input and output files on
6083 the command line. This should avoid shell escape redirection problems
6087 *) Initial support for certificate extension requests, these are included
6088 in things like Xenroll certificate requests. Included functions to allow
6089 extensions to be obtained and added.
6092 *) -crlf option to s_client and s_server for sending newlines as
6093 CRLF (as required by many protocols).
6096 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
6098 *) Install libRSAglue.a when OpenSSL is built with RSAref.
6099 [Ralf S. Engelschall]
6101 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
6102 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
6104 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
6108 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
6109 DH parameters/keys (q is lost during that conversion, but the resulting
6110 DH parameters contain its length).
6112 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
6113 much faster than DH_generate_parameters (which creates parameters
6114 where p = 2*q + 1), and also the smaller q makes DH computations
6115 much more efficient (160-bit exponentiation instead of 1024-bit
6116 exponentiation); so this provides a convenient way to support DHE
6117 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
6118 utter importance to use
6119 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6121 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6122 when such DH parameters are used, because otherwise small subgroup
6123 attacks may become possible!
6126 *) Avoid memory leak in i2d_DHparams.
6129 *) Allow the -k option to be used more than once in the enc program:
6130 this allows the same encrypted message to be read by multiple recipients.
6133 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
6134 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
6135 it will always use the numerical form of the OID, even if it has a short
6139 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
6140 method only got called if p,q,dmp1,dmq1,iqmp components were present,
6141 otherwise bn_mod_exp was called. In the case of hardware keys for example
6142 no private key components need be present and it might store extra data
6143 in the RSA structure, which cannot be accessed from bn_mod_exp.
6144 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
6145 private key operations.
6148 *) Added support for SPARC Linux.
6151 *) pem_password_cb function type incompatibly changed from
6152 typedef int pem_password_cb(char *buf, int size, int rwflag);
6154 ....(char *buf, int size, int rwflag, void *userdata);
6155 so that applications can pass data to their callbacks:
6156 The PEM[_ASN1]_{read,write}... functions and macros now take an
6157 additional void * argument, which is just handed through whenever
6158 the password callback is called.
6159 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
6161 New function SSL_CTX_set_default_passwd_cb_userdata.
6163 Compatibility note: As many C implementations push function arguments
6164 onto the stack in reverse order, the new library version is likely to
6165 interoperate with programs that have been compiled with the old
6166 pem_password_cb definition (PEM_whatever takes some data that
6167 happens to be on the stack as its last argument, and the callback
6168 just ignores this garbage); but there is no guarantee whatsoever that
6171 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
6172 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
6173 problems not only on Windows, but also on some Unix platforms.
6174 To avoid problematic command lines, these definitions are now in an
6175 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
6176 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
6179 *) MIPS III/IV assembler module is reimplemented.
6182 *) More DES library cleanups: remove references to srand/rand and
6183 delete an unused file.
6186 *) Add support for the the free Netwide assembler (NASM) under Win32,
6187 since not many people have MASM (ml) and it can be hard to obtain.
6188 This is currently experimental but it seems to work OK and pass all
6189 the tests. Check out INSTALL.W32 for info.
6192 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
6193 without temporary keys kept an extra copy of the server key,
6194 and connections with temporary keys did not free everything in case
6198 *) New function RSA_check_key and new openssl rsa option -check
6199 for verifying the consistency of RSA keys.
6200 [Ulf Moeller, Bodo Moeller]
6202 *) Various changes to make Win32 compile work:
6203 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
6204 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
6205 comparison" warnings.
6206 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
6209 *) Add a debugging option to PKCS#5 v2 key generation function: when
6210 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
6211 derived keys are printed to stderr.
6214 *) Copy the flags in ASN1_STRING_dup().
6215 [Roman E. Pavlov <pre@mo.msk.ru>]
6217 *) The x509 application mishandled signing requests containing DSA
6218 keys when the signing key was also DSA and the parameters didn't match.
6220 It was supposed to omit the parameters when they matched the signing key:
6221 the verifying software was then supposed to automatically use the CA's
6222 parameters if they were absent from the end user certificate.
6224 Omitting parameters is no longer recommended. The test was also
6225 the wrong way round! This was probably due to unusual behaviour in
6226 EVP_cmp_parameters() which returns 1 if the parameters match.
6227 This meant that parameters were omitted when they *didn't* match and
6228 the certificate was useless. Certificates signed with 'ca' didn't have
6230 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
6232 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
6233 The interface is as follows:
6234 Applications can use
6235 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
6236 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
6237 "off" is now the default.
6238 The library internally uses
6239 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
6240 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
6241 to disable memory-checking temporarily.
6243 Some inconsistent states that previously were possible (and were
6244 even the default) are now avoided.
6246 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
6247 with each memory chunk allocated; this is occasionally more helpful
6248 than just having a counter.
6250 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
6252 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
6256 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
6257 which largely parallels "options", but is for changing API behaviour,
6258 whereas "options" are about protocol behaviour.
6259 Initial "mode" flags are:
6261 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
6262 a single record has been written.
6263 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
6264 retries use the same buffer location.
6265 (But all of the contents must be
6269 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
6272 *) Fix problems with no-hmac etc.
6273 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
6275 *) New functions RSA_get_default_method(), RSA_set_method() and
6276 RSA_get_method(). These allows replacement of RSA_METHODs without having
6277 to mess around with the internals of an RSA structure.
6280 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
6281 Also really enable memory leak checks in openssl.c and in some
6283 [Chad C. Mulligan, Bodo Moeller]
6285 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
6286 up the length of negative integers. This has now been simplified to just
6287 store the length when it is first determined and use it later, rather
6288 than trying to keep track of where data is copied and updating it to
6290 [Steve Henson, reported by Brien Wheeler
6291 <bwheeler@authentica-security.com>]
6293 *) Add a new function PKCS7_signatureVerify. This allows the verification
6294 of a PKCS#7 signature but with the signing certificate passed to the
6295 function itself. This contrasts with PKCS7_dataVerify which assumes the
6296 certificate is present in the PKCS#7 structure. This isn't always the
6297 case: certificates can be omitted from a PKCS#7 structure and be
6298 distributed by "out of band" means (such as a certificate database).
6301 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
6302 function prototypes in pem.h, also change util/mkdef.pl to add the
6303 necessary function names.
6306 *) mk1mf.pl (used by Windows builds) did not properly read the
6307 options set by Configure in the top level Makefile, and Configure
6308 was not even able to write more than one option correctly.
6309 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
6312 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
6313 file to be loaded from a BIO or FILE pointer. The BIO version will
6314 for example allow memory BIOs to contain config info.
6317 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
6318 Whoever hopes to achieve shared-library compatibility across versions
6319 must use this, not the compile-time macro.
6320 (Exercise 0.9.4: Which is the minimum library version required by
6322 Note: All this applies only to multi-threaded programs, others don't
6326 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
6327 through a BIO pair triggered the default case, i.e.
6328 SSLerr(...,SSL_R_UNKNOWN_STATE).
6331 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
6332 can use the SSL library even if none of the specific BIOs is
6336 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
6337 for the encoded length.
6338 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
6340 *) Add initial documentation of the X509V3 functions.
6343 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
6344 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
6345 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
6346 secure PKCS#8 private key format with a high iteration count.
6349 *) Fix determination of Perl interpreter: A perl or perl5
6350 _directory_ in $PATH was also accepted as the interpreter.
6351 [Ralf S. Engelschall]
6353 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
6354 wrong with it but it was very old and did things like calling
6355 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
6359 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
6360 to use the new extension code.
6363 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
6364 with macros. This should make it easier to change their form, add extra
6365 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
6369 *) Add to configuration table a new entry that can specify an alternative
6370 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
6371 according to Mark Crispin <MRC@Panda.COM>.
6375 *) DES CBC did not update the IV. Weird.
6378 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
6379 Changing the behaviour of the former might break existing programs --
6380 where IV updating is needed, des_ncbc_encrypt can be used.
6383 *) When bntest is run from "make test" it drives bc to check its
6384 calculations, as well as internally checking them. If an internal check
6385 fails, it needs to cause bc to give a non-zero result or make test carries
6386 on without noticing the failure. Fixed.
6389 *) DES library cleanups.
6392 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
6393 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
6394 ciphers. NOTE: although the key derivation function has been verified
6395 against some published test vectors it has not been extensively tested
6396 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
6400 *) Instead of "mkdir -p", which is not fully portable, use new
6401 Perl script "util/mkdir-p.pl".
6404 *) Rewrite the way password based encryption (PBE) is handled. It used to
6405 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
6406 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
6407 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
6408 the 'parameter' field of the AlgorithmIdentifier is passed to the
6409 underlying key generation function so it must do its own ASN1 parsing.
6410 This has also changed the EVP_PBE_CipherInit() function which now has a
6411 'parameter' argument instead of literal salt and iteration count values
6412 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
6415 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
6416 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
6417 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
6418 KEY" because this clashed with PKCS#8 unencrypted string. Since this
6419 value was just used as a "magic string" and not used directly its
6420 value doesn't matter.
6423 *) Introduce some semblance of const correctness to BN. Shame C doesn't
6427 *) "linux-sparc64" configuration (ultrapenguin).
6428 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
6429 "linux-sparc" configuration.
6430 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
6432 *) config now generates no-xxx options for missing ciphers.
6435 *) Support the EBCDIC character set (work in progress).
6436 File ebcdic.c not yet included because it has a different license.
6437 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6439 *) Support BS2000/OSD-POSIX.
6440 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6442 *) Make callbacks for key generation use void * instead of char *.
6445 *) Make S/MIME samples compile (not yet tested).
6448 *) Additional typesafe stacks.
6451 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
6455 Changes between 0.9.3 and 0.9.3a [29 May 1999]
6457 *) New configuration variant "sco5-gcc".
6459 *) Updated some demos.
6460 [Sean O Riordain, Wade Scholine]
6462 *) Add missing BIO_free at exit of pkcs12 application.
6465 *) Fix memory leak in conf.c.
6468 *) Updates for Win32 to assembler version of MD5.
6471 *) Set #! path to perl in apps/der_chop to where we found it
6472 instead of using a fixed path.
6475 *) SHA library changes for irix64-mips4-cc.
6478 *) Improvements for VMS support.
6482 Changes between 0.9.2b and 0.9.3 [24 May 1999]
6484 *) Bignum library bug fix. IRIX 6 passes "make test" now!
6485 This also avoids the problems with SC4.2 and unpatched SC5.
6486 [Andy Polyakov <appro@fy.chalmers.se>]
6488 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
6489 These are required because of the typesafe stack would otherwise break
6490 existing code. If old code used a structure member which used to be STACK
6491 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
6492 sk_num or sk_value it would produce an error because the num, data members
6493 are not present in STACK_OF. Now it just produces a warning. sk_set
6494 replaces the old method of assigning a value to sk_value
6495 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
6496 that does this will no longer work (and should use sk_set instead) but
6497 this could be regarded as a "questionable" behaviour anyway.
6500 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
6501 correctly handle encrypted S/MIME data.
6504 *) Change type of various DES function arguments from des_cblock
6505 (which means, in function argument declarations, pointer to char)
6506 to des_cblock * (meaning pointer to array with 8 char elements),
6507 which allows the compiler to do more typechecking; it was like
6508 that back in SSLeay, but with lots of ugly casts.
6510 Introduce new type const_des_cblock.
6513 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
6514 problems: find RecipientInfo structure that matches recipient certificate
6515 and initialise the ASN1 structures properly based on passed cipher.
6518 *) Belatedly make the BN tests actually check the results.
6521 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
6522 to and from BNs: it was completely broken. New compilation option
6523 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
6524 key elements as negative integers.
6527 *) Reorganize and speed up MD5.
6528 [Andy Polyakov <appro@fy.chalmers.se>]
6531 [Richard Levitte <richard@levitte.org>]
6533 *) New option -out to asn1parse to allow the parsed structure to be
6534 output to a file. This is most useful when combined with the -strparse
6535 option to examine the output of things like OCTET STRINGS.
6538 *) Make SSL library a little more fool-proof by not requiring any longer
6539 that SSL_set_{accept,connect}_state be called before
6540 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
6541 in many applications because usually everything *appeared* to work as
6542 intended anyway -- now it really works as intended).
6545 *) Move openssl.cnf out of lib/.
6548 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
6549 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
6550 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
6551 [Ralf S. Engelschall]
6553 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
6554 handle PKCS#7 enveloped data properly.
6555 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
6557 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
6558 copying pointers. The cert_st handling is changed by this in
6559 various ways (and thus what used to be known as ctx->default_cert
6560 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
6561 any longer when s->cert does not give us what we need).
6562 ssl_cert_instantiate becomes obsolete by this change.
6563 As soon as we've got the new code right (possibly it already is?),
6564 we have solved a couple of bugs of the earlier code where s->cert
6565 was used as if it could not have been shared with other SSL structures.
6567 Note that using the SSL API in certain dirty ways now will result
6568 in different behaviour than observed with earlier library versions:
6569 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
6570 does not influence s as it used to.
6572 In order to clean up things more thoroughly, inside SSL_SESSION
6573 we don't use CERT any longer, but a new structure SESS_CERT
6574 that holds per-session data (if available); currently, this is
6575 the peer's certificate chain and, for clients, the server's certificate
6576 and temporary key. CERT holds only those values that can have
6577 meaningful defaults in an SSL_CTX.
6580 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
6581 from the internal representation. Various PKCS#7 fixes: remove some
6582 evil casts and set the enc_dig_alg field properly based on the signing
6586 *) Allow PKCS#12 password to be set from the command line or the
6587 environment. Let 'ca' get its config file name from the environment
6588 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
6592 *) Allow certificate policies extension to use an IA5STRING for the
6593 organization field. This is contrary to the PKIX definition but
6594 VeriSign uses it and IE5 only recognises this form. Document 'x509'
6598 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
6599 without disallowing inline assembler and the like for non-pedantic builds.
6602 *) Support Borland C++ builder.
6603 [Janez Jere <jj@void.si>, modified by Ulf Möller]
6608 *) SHA-1 cleanups and performance enhancements.
6609 [Andy Polyakov <appro@fy.chalmers.se>]
6611 *) Sparc v8plus assembler for the bignum library.
6612 [Andy Polyakov <appro@fy.chalmers.se>]
6614 *) Accept any -xxx and +xxx compiler options in Configure.
6617 *) Update HPUX configuration.
6620 *) Add missing sk_<type>_unshift() function to safestack.h
6621 [Ralf S. Engelschall]
6623 *) New function SSL_CTX_use_certificate_chain_file that sets the
6624 "extra_cert"s in addition to the certificate. (This makes sense
6625 only for "PEM" format files, as chains as a whole are not
6629 *) Support verify_depth from the SSL API.
6630 x509_vfy.c had what can be considered an off-by-one-error:
6631 Its depth (which was not part of the external interface)
6632 was actually counting the number of certificates in a chain;
6633 now it really counts the depth.
6636 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
6637 instead of X509err, which often resulted in confusing error
6638 messages since the error codes are not globally unique
6639 (e.g. an alleged error in ssl3_accept when a certificate
6640 didn't match the private key).
6642 *) New function SSL_CTX_set_session_id_context that allows to set a default
6643 value (so that you don't need SSL_set_session_id_context for each
6644 connection using the SSL_CTX).
6647 *) OAEP decoding bug fix.
6650 *) Support INSTALL_PREFIX for package builders, as proposed by
6654 *) New Configure options "threads" and "no-threads". For systems
6655 where the proper compiler options are known (currently Solaris
6656 and Linux), "threads" is the default.
6659 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
6662 *) Install various scripts to $(OPENSSLDIR)/misc, not to
6663 $(INSTALLTOP)/bin -- they shouldn't clutter directories
6664 such as /usr/local/bin.
6667 *) "make linux-shared" to build shared libraries.
6668 [Niels Poppe <niels@netbox.org>]
6670 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
6673 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
6674 extension adding in x509 utility.
6677 *) Remove NOPROTO sections and error code comments.
6680 *) Partial rewrite of the DEF file generator to now parse the ANSI
6684 *) New Configure options --prefix=DIR and --openssldir=DIR.
6687 *) Complete rewrite of the error code script(s). It is all now handled
6688 by one script at the top level which handles error code gathering,
6689 header rewriting and C source file generation. It should be much better
6690 than the old method: it now uses a modified version of Ulf's parser to
6691 read the ANSI prototypes in all header files (thus the old K&R definitions
6692 aren't needed for error creation any more) and do a better job of
6693 translating function codes into names. The old 'ASN1 error code imbedded
6694 in a comment' is no longer necessary and it doesn't use .err files which
6695 have now been deleted. Also the error code call doesn't have to appear all
6696 on one line (which resulted in some large lines...).
6699 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
6702 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
6703 0 (which usually indicates a closed connection), but continue reading.
6706 *) Fix some race conditions.
6709 *) Add support for CRL distribution points extension. Add Certificate
6710 Policies and CRL distribution points documentation.
6713 *) Move the autogenerated header file parts to crypto/opensslconf.h.
6716 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
6717 8 of keying material. Merlin has also confirmed interop with this fix
6718 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
6719 [Merlin Hughes <merlin@baltimore.ie>]
6721 *) Fix lots of warnings.
6722 [Richard Levitte <levitte@stacken.kth.se>]
6724 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
6725 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
6726 [Richard Levitte <levitte@stacken.kth.se>]
6728 *) Fix problems with sizeof(long) == 8.
6729 [Andy Polyakov <appro@fy.chalmers.se>]
6731 *) Change functions to ANSI C.
6734 *) Fix typos in error codes.
6735 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
6737 *) Remove defunct assembler files from Configure.
6740 *) SPARC v8 assembler BIGNUM implementation.
6741 [Andy Polyakov <appro@fy.chalmers.se>]
6743 *) Support for Certificate Policies extension: both print and set.
6744 Various additions to support the r2i method this uses.
6747 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
6748 return a const string when you are expecting an allocated buffer.
6751 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
6752 types DirectoryString and DisplayText.
6755 *) Add code to allow r2i extensions to access the configuration database,
6756 add an LHASH database driver and add several ctx helper functions.
6759 *) Fix an evil bug in bn_expand2() which caused various BN functions to
6760 fail when they extended the size of a BIGNUM.
6763 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
6764 support typesafe stack.
6767 *) Fix typo in SSL_[gs]et_options().
6768 [Nils Frostberg <nils@medcom.se>]
6770 *) Delete various functions and files that belonged to the (now obsolete)
6771 old X509V3 handling code.
6774 *) New Configure option "rsaref".
6777 *) Don't auto-generate pem.h.
6780 *) Introduce type-safe ASN.1 SETs.
6783 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
6784 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
6786 *) Introduce type-safe STACKs. This will almost certainly break lots of code
6787 that links with OpenSSL (well at least cause lots of warnings), but fear
6788 not: the conversion is trivial, and it eliminates loads of evil casts. A
6789 few STACKed things have been converted already. Feel free to convert more.
6790 In the fullness of time, I'll do away with the STACK type altogether.
6793 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
6794 specified in <certfile> by updating the entry in the index.txt file.
6795 This way one no longer has to edit the index.txt file manually for
6796 revoking a certificate. The -revoke option does the gory details now.
6797 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
6799 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
6800 `-text' option at all and this way the `-noout -text' combination was
6801 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
6802 [Ralf S. Engelschall]
6804 *) Make sure a corresponding plain text error message exists for the
6805 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
6806 verify callback function determined that a certificate was revoked.
6807 [Ralf S. Engelschall]
6809 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
6810 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
6811 all available cipers including rc5, which was forgotten until now.
6812 In order to let the testing shell script know which algorithms
6813 are available, a new (up to now undocumented) command
6814 "openssl list-cipher-commands" is used.
6817 *) Bugfix: s_client occasionally would sleep in select() when
6818 it should have checked SSL_pending() first.
6821 *) New functions DSA_do_sign and DSA_do_verify to provide access to
6822 the raw DSA values prior to ASN.1 encoding.
6825 *) Tweaks to Configure
6826 [Niels Poppe <niels@netbox.org>]
6828 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
6832 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
6835 *) New config option to avoid instructions that are illegal on the 80386.
6836 The default code is faster, but requires at least a 486.
6839 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
6840 SSL2_SERVER_VERSION (not used at all) macros, which are now the
6841 same as SSL2_VERSION anyway.
6844 *) New "-showcerts" option for s_client.
6847 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
6848 application. Various cleanups and fixes.
6851 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
6852 modify error routines to work internally. Add error codes and PBE init
6853 to library startup routines.
6856 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
6857 packing functions to asn1 and evp. Changed function names and error
6858 codes along the way.
6861 *) PKCS12 integration: and so it begins... First of several patches to
6862 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
6863 objects to objects.h
6866 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
6867 and display support for Thawte strong extranet extension.
6870 *) Add LinuxPPC support.
6871 [Jeff Dubrule <igor@pobox.org>]
6873 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
6874 bn_div_words in alpha.s.
6875 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
6877 *) Make sure the RSA OAEP test is skipped under -DRSAref because
6878 OAEP isn't supported when OpenSSL is built with RSAref.
6879 [Ulf Moeller <ulf@fitug.de>]
6881 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
6882 so they no longer are missing under -DNOPROTO.
6883 [Soren S. Jorvang <soren@t.dk>]
6886 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
6888 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
6889 doesn't work when the session is reused. Coming soon!
6892 *) Fix a security hole, that allows sessions to be reused in the wrong
6893 context thus bypassing client cert protection! All software that uses
6894 client certs and session caches in multiple contexts NEEDS PATCHING to
6895 allow session reuse! A fuller solution is in the works.
6896 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
6898 *) Some more source tree cleanups (removed obsolete files
6899 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
6900 permission on "config" script to be executable) and a fix for the INSTALL
6902 [Ulf Moeller <ulf@fitug.de>]
6904 *) Remove some legacy and erroneous uses of malloc, free instead of
6906 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
6908 *) Make rsa_oaep_test return non-zero on error.
6909 [Ulf Moeller <ulf@fitug.de>]
6911 *) Add support for native Solaris shared libraries. Configure
6912 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
6913 if someone would make that last step automatic.
6914 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
6916 *) ctx_size was not built with the right compiler during "make links". Fixed.
6919 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
6920 except NULL ciphers". This means the default cipher list will no longer
6921 enable NULL ciphers. They need to be specifically enabled e.g. with
6922 the string "DEFAULT:eNULL".
6925 *) Fix to RSA private encryption routines: if p < q then it would
6926 occasionally produce an invalid result. This will only happen with
6927 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
6930 *) Be less restrictive and allow also `perl util/perlpath.pl
6931 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
6932 because this way one can also use an interpreter named `perl5' (which is
6933 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
6934 installed as `perl').
6935 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6937 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
6938 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6940 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
6941 advapi32.lib to Win32 build and change the pem test comparision
6942 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
6943 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
6944 and crypto/des/ede_cbcm_enc.c.
6947 *) DES quad checksum was broken on big-endian architectures. Fixed.
6950 *) Comment out two functions in bio.h that aren't implemented. Fix up the
6951 Win32 test batch file so it (might) work again. The Win32 test batch file
6952 is horrible: I feel ill....
6955 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
6956 in e_os.h. Audit of header files to check ANSI and non ANSI
6957 sections: 10 functions were absent from non ANSI section and not exported
6958 from Windows DLLs. Fixed up libeay.num for new functions.
6961 *) Make `openssl version' output lines consistent.
6962 [Ralf S. Engelschall]
6964 *) Fix Win32 symbol export lists for BIO functions: Added
6965 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
6966 to ms/libeay{16,32}.def.
6967 [Ralf S. Engelschall]
6969 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
6970 fine under Unix and passes some trivial tests I've now added. But the
6971 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
6972 added to make sure no one expects that this stuff really works in the
6973 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
6974 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
6976 [Ralf S. Engelschall]
6978 *) Fix the generation of two part addresses in perl.
6979 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
6981 *) Add config entry for Linux on MIPS.
6982 [John Tobey <jtobey@channel1.com>]
6984 *) Make links whenever Configure is run, unless we are on Windoze.
6987 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
6988 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
6992 *) Add a useful kludge to allow package maintainers to specify compiler and
6993 other platforms details on the command line without having to patch the
6994 Configure script everytime: One now can use ``perl Configure
6995 <id>:<details>'', i.e. platform ids are allowed to have details appended
6996 to them (seperated by colons). This is treated as there would be a static
6997 pre-configured entry in Configure's %table under key <id> with value
6998 <details> and ``perl Configure <id>'' is called. So, when you want to
6999 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
7000 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
7001 now, which overrides the FreeBSD-elf entry on-the-fly.
7002 [Ralf S. Engelschall]
7004 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
7007 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
7008 on the `perl Configure ...' command line. This way one can compile
7009 OpenSSL libraries with Position Independent Code (PIC) which is needed
7010 for linking it into DSOs.
7011 [Ralf S. Engelschall]
7013 *) Remarkably, export ciphers were totally broken and no-one had noticed!
7017 *) Cleaned up the LICENSE document: The official contact for any license
7018 questions now is the OpenSSL core team under openssl-core@openssl.org.
7019 And add a paragraph about the dual-license situation to make sure people
7020 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
7021 to the OpenSSL toolkit.
7022 [Ralf S. Engelschall]
7024 *) General source tree makefile cleanups: Made `making xxx in yyy...'
7025 display consistent in the source tree and replaced `/bin/rm' by `rm'.
7026 Additonally cleaned up the `make links' target: Remove unnecessary
7027 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
7028 to speed processing and no longer clutter the display with confusing
7029 stuff. Instead only the actually done links are displayed.
7030 [Ralf S. Engelschall]
7032 *) Permit null encryption ciphersuites, used for authentication only. It used
7033 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
7034 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
7038 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
7039 signed attributes when verifying signatures (this would break them),
7040 the detached data encoding was wrong and public keys obtained using
7041 X509_get_pubkey() weren't freed.
7044 *) Add text documentation for the BUFFER functions. Also added a work around
7045 to a Win95 console bug. This was triggered by the password read stuff: the
7046 last character typed gets carried over to the next fread(). If you were
7047 generating a new cert request using 'req' for example then the last
7048 character of the passphrase would be CR which would then enter the first
7052 *) Added the new `Includes OpenSSL Cryptography Software' button as
7053 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
7054 button and can be used by applications based on OpenSSL to show the
7055 relationship to the OpenSSL project.
7056 [Ralf S. Engelschall]
7058 *) Remove confusing variables in function signatures in files
7059 ssl/ssl_lib.c and ssl/ssl.h.
7060 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7062 *) Don't install bss_file.c under PREFIX/include/
7063 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7065 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
7066 functions that return function pointers and has support for NT specific
7067 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
7068 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
7069 unsigned to signed types: this was killing the Win32 compile.
7072 *) Add new certificate file to stack functions,
7073 SSL_add_dir_cert_subjects_to_stack() and
7074 SSL_add_file_cert_subjects_to_stack(). These largely supplant
7075 SSL_load_client_CA_file(), and can be used to add multiple certs easily
7076 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
7077 This means that Apache-SSL and similar packages don't have to mess around
7078 to add as many CAs as they want to the preferred list.
7081 *) Experiment with doxygen documentation. Currently only partially applied to
7083 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
7084 openssl.doxy as the configuration file.
7087 *) Get rid of remaining C++-style comments which strict C compilers hate.
7088 [Ralf S. Engelschall, pointed out by Carlos Amengual]
7090 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
7091 compiled in by default: it has problems with large keys.
7094 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
7095 DH private keys and/or callback functions which directly correspond to
7096 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
7097 is needed for applications which have to configure certificates on a
7098 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
7100 For the RSA certificate situation is makes no difference, but
7101 for the DSA certificate situation this fixes the "no shared cipher"
7102 problem where the OpenSSL cipher selection procedure failed because the
7103 temporary keys were not overtaken from the context and the API provided
7104 no way to reconfigure them.
7105 The new functions now let applications reconfigure the stuff and they
7106 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
7107 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
7108 non-public-API function ssl_cert_instantiate() is used as a helper
7109 function and also to reduce code redundancy inside ssl_rsa.c.
7110 [Ralf S. Engelschall]
7112 *) Move s_server -dcert and -dkey options out of the undocumented feature
7113 area because they are useful for the DSA situation and should be
7114 recognized by the users.
7115 [Ralf S. Engelschall]
7117 *) Fix the cipher decision scheme for export ciphers: the export bits are
7118 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
7119 SSL_EXP_MASK. So, the original variable has to be used instead of the
7120 already masked variable.
7121 [Richard Levitte <levitte@stacken.kth.se>]
7123 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
7124 [Richard Levitte <levitte@stacken.kth.se>]
7126 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
7127 from `int' to `unsigned int' because it's a length and initialized by
7128 EVP_DigestFinal() which expects an `unsigned int *'.
7129 [Richard Levitte <levitte@stacken.kth.se>]
7131 *) Don't hard-code path to Perl interpreter on shebang line of Configure
7132 script. Instead use the usual Shell->Perl transition trick.
7133 [Ralf S. Engelschall]
7135 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
7136 (in addition to RSA certificates) to match the behaviour of `openssl dsa
7137 -noout -modulus' as it's already the case for `openssl rsa -noout
7138 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
7139 currently the public key is printed (a decision which was already done by
7140 `openssl dsa -modulus' in the past) which serves a similar purpose.
7141 Additionally the NO_RSA no longer completely removes the whole -modulus
7142 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
7144 [Ralf S. Engelschall]
7146 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
7147 BIO. See the source (crypto/evp/bio_ok.c) for more info.
7148 [Arne Ansper <arne@ats.cyber.ee>]
7150 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
7151 to be added. Now both 'req' and 'ca' can use new objects defined in the
7155 *) Add cool BIO that does syslog (or event log on NT).
7156 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
7158 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
7159 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
7160 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
7161 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
7164 *) Add preliminary config info for new extension code.
7167 *) Make RSA_NO_PADDING really use no padding.
7168 [Ulf Moeller <ulf@fitug.de>]
7170 *) Generate errors when private/public key check is done.
7173 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
7174 for some CRL extensions and new objects added.
7177 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
7178 key usage extension and fuller support for authority key id.
7181 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
7182 padding method for RSA, which is recommended for new applications in PKCS
7183 #1 v2.0 (RFC 2437, October 1998).
7184 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
7185 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
7186 against Bleichbacher's attack on RSA.
7187 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
7190 *) Updates to the new SSL compression code
7191 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7193 *) Fix so that the version number in the master secret, when passed
7194 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
7195 (because the server will not accept higher), that the version number
7196 is 0x03,0x01, not 0x03,0x00
7197 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7199 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
7200 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
7201 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
7204 *) Support for RAW extensions where an arbitrary extension can be
7205 created by including its DER encoding. See apps/openssl.cnf for
7209 *) Make sure latest Perl versions don't interpret some generated C array
7210 code as Perl array code in the crypto/err/err_genc.pl script.
7211 [Lars Weber <3weber@informatik.uni-hamburg.de>]
7213 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
7214 not many people have the assembler. Various Win32 compilation fixes and
7215 update to the INSTALL.W32 file with (hopefully) more accurate Win32
7219 *) Modify configure script 'Configure' to automatically create crypto/date.h
7220 file under Win32 and also build pem.h from pem.org. New script
7221 util/mkfiles.pl to create the MINFO file on environments that can't do a
7222 'make files': perl util/mkfiles.pl >MINFO should work.
7225 *) Major rework of DES function declarations, in the pursuit of correctness
7226 and purity. As a result, many evil casts evaporated, and some weirdness,
7227 too. You may find this causes warnings in your code. Zapping your evil
7228 casts will probably fix them. Mostly.
7231 *) Fix for a typo in asn1.h. Bug fix to object creation script
7232 obj_dat.pl. It considered a zero in an object definition to mean
7233 "end of object": none of the objects in objects.h have any zeros
7234 so it wasn't spotted.
7235 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
7237 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
7238 Masking (CBCM). In the absence of test vectors, the best I have been able
7239 to do is check that the decrypt undoes the encrypt, so far. Send me test
7240 vectors if you have them.
7243 *) Correct calculation of key length for export ciphers (too much space was
7244 allocated for null ciphers). This has not been tested!
7247 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
7248 message is now correct (it understands "crypto" and "ssl" on its
7249 command line). There is also now an "update" option. This will update
7250 the util/ssleay.num and util/libeay.num files with any new functions.
7252 perl util/mkdef.pl crypto ssl update
7253 it will update them.
7256 *) Overhauled the Perl interface (perl/*):
7257 - ported BN stuff to OpenSSL's different BN library
7258 - made the perl/ source tree CVS-aware
7259 - renamed the package from SSLeay to OpenSSL (the files still contain
7260 their history because I've copied them in the repository)
7261 - removed obsolete files (the test scripts will be replaced
7262 by better Test::Harness variants in the future)
7263 [Ralf S. Engelschall]
7265 *) First cut for a very conservative source tree cleanup:
7266 1. merge various obsolete readme texts into doc/ssleay.txt
7267 where we collect the old documents and readme texts.
7268 2. remove the first part of files where I'm already sure that we no
7269 longer need them because of three reasons: either they are just temporary
7270 files which were left by Eric or they are preserved original files where
7271 I've verified that the diff is also available in the CVS via "cvs diff
7272 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
7273 the crypto/md/ stuff).
7274 [Ralf S. Engelschall]
7276 *) More extension code. Incomplete support for subject and issuer alt
7277 name, issuer and authority key id. Change the i2v function parameters
7278 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
7279 what that's for :-) Fix to ASN1 macro which messed up
7280 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
7283 *) Preliminary support for ENUMERATED type. This is largely copied from the
7287 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
7288 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7290 *) Make sure `make rehash' target really finds the `openssl' program.
7291 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7293 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
7294 like to hear about it if this slows down other processors.
7297 *) Add CygWin32 platform information to Configure script.
7298 [Alan Batie <batie@aahz.jf.intel.com>]
7300 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
7301 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
7303 *) New program nseq to manipulate netscape certificate sequences
7306 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
7310 *) Fixes to BN code. Previously the default was to define BN_RECURSION
7311 but the BN code had some problems that would cause failures when
7312 doing certificate verification and some other functions.
7313 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7315 *) Add ASN1 and PEM code to support netscape certificate sequences.
7318 *) Add ASN1 and PEM code to support netscape certificate sequences.
7321 *) Add several PKIX and private extended key usage OIDs.
7324 *) Modify the 'ca' program to handle the new extension code. Modify
7325 openssl.cnf for new extension format, add comments.
7328 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
7329 and add a sample to openssl.cnf so req -x509 now adds appropriate
7333 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
7334 error code, add initial support to X509_print() and x509 application.
7337 *) Takes a deep breath and start addding X509 V3 extension support code. Add
7338 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
7339 stuff is currently isolated and isn't even compiled yet.
7342 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
7343 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
7344 Removed the versions check from X509 routines when loading extensions:
7345 this allows certain broken certificates that don't set the version
7346 properly to be processed.
7349 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
7350 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
7351 can still be regenerated with "make depend".
7354 *) Spelling mistake in C version of CAST-128.
7355 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
7357 *) Changes to the error generation code. The perl script err-code.pl
7358 now reads in the old error codes and retains the old numbers, only
7359 adding new ones if necessary. It also only changes the .err files if new
7360 codes are added. The makefiles have been modified to only insert errors
7361 when needed (to avoid needlessly modifying header files). This is done
7362 by only inserting errors if the .err file is newer than the auto generated
7363 C file. To rebuild all the error codes from scratch (the old behaviour)
7364 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
7365 or delete all the .err files.
7368 *) CAST-128 was incorrectly implemented for short keys. The C version has
7369 been fixed, but is untested. The assembler versions are also fixed, but
7370 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
7371 to regenerate it if needed.
7372 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
7373 Hagino <itojun@kame.net>]
7375 *) File was opened incorrectly in randfile.c.
7376 [Ulf Möller <ulf@fitug.de>]
7378 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
7379 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
7380 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
7381 al: it's just almost always a UTCTime. Note this patch adds new error
7382 codes so do a "make errors" if there are problems.
7385 *) Correct Linux 1 recognition in config.
7386 [Ulf Möller <ulf@fitug.de>]
7388 *) Remove pointless MD5 hash when using DSA keys in ca.
7389 [Anonymous <nobody@replay.com>]
7391 *) Generate an error if given an empty string as a cert directory. Also
7392 generate an error if handed NULL (previously returned 0 to indicate an
7393 error, but didn't set one).
7394 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
7396 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
7399 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
7400 parameters. This was causing a warning which killed off the Win32 compile.
7403 *) Remove C++ style comments from crypto/bn/bn_local.h.
7404 [Neil Costigan <neil.costigan@celocom.com>]
7406 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
7407 based on a text string, looking up short and long names and finally
7408 "dot" format. The "dot" format stuff didn't work. Added new function
7409 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
7410 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
7411 OID is not part of the table.
7414 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
7415 X509_LOOKUP_by_alias().
7418 *) Sort openssl functions by name.
7421 *) Get the gendsa program working (hopefully) and add it to app list. Remove
7422 encryption from sample DSA keys (in case anyone is interested the password
7426 *) Make _all_ *_free functions accept a NULL pointer.
7427 [Frans Heymans <fheymans@isaserver.be>]
7429 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
7431 [Anonymous <nobody@replay.com>]
7433 *) s_server should send the CAfile as acceptable CAs, not its own cert.
7434 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7436 *) Don't blow it for numeric -newkey arguments to apps/req.
7437 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7439 *) Temp key "for export" tests were wrong in s3_srvr.c.
7440 [Anonymous <nobody@replay.com>]
7442 *) Add prototype for temp key callback functions
7443 SSL_CTX_set_tmp_{rsa,dh}_callback().
7446 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
7447 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
7450 *) X509_name_add_entry() freed the wrong thing after an error.
7451 [Arne Ansper <arne@ats.cyber.ee>]
7453 *) rsa_eay.c would attempt to free a NULL context.
7454 [Arne Ansper <arne@ats.cyber.ee>]
7456 *) BIO_s_socket() had a broken should_retry() on Windoze.
7457 [Arne Ansper <arne@ats.cyber.ee>]
7459 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
7460 [Arne Ansper <arne@ats.cyber.ee>]
7462 *) Make sure the already existing X509_STORE->depth variable is initialized
7463 in X509_STORE_new(), but document the fact that this variable is still
7464 unused in the certificate verification process.
7465 [Ralf S. Engelschall]
7467 *) Fix the various library and apps files to free up pkeys obtained from
7468 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
7471 *) Fix reference counting in X509_PUBKEY_get(). This makes
7472 demos/maurice/example2.c work, amongst others, probably.
7473 [Steve Henson and Ben Laurie]
7475 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
7476 `openssl' and second, the shortcut symlinks for the `openssl <command>'
7477 are no longer created. This way we have a single and consistent command
7478 line interface `openssl <command>', similar to `cvs <command>'.
7479 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
7481 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
7482 BIT STRING wrapper always have zero unused bits.
7485 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
7488 *) Make the top-level INSTALL documentation easier to understand.
7491 *) Makefiles updated to exit if an error occurs in a sub-directory
7492 make (including if user presses ^C) [Paul Sutton]
7494 *) Make Montgomery context stuff explicit in RSA data structure.
7497 *) Fix build order of pem and err to allow for generated pem.h.
7500 *) Fix renumbering bug in X509_NAME_delete_entry().
7503 *) Enhanced the err-ins.pl script so it makes the error library number
7504 global and can add a library name. This is needed for external ASN1 and
7505 other error libraries.
7508 *) Fixed sk_insert which never worked properly.
7511 *) Fix ASN1 macros so they can handle indefinite length construted
7512 EXPLICIT tags. Some non standard certificates use these: they can now
7516 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
7517 into a single doc/ssleay.txt bundle. This way the information is still
7518 preserved but no longer messes up this directory. Now it's new room for
7519 the new set of documenation files.
7520 [Ralf S. Engelschall]
7522 *) SETs were incorrectly DER encoded. This was a major pain, because they
7523 shared code with SEQUENCEs, which aren't coded the same. This means that
7524 almost everything to do with SETs or SEQUENCEs has either changed name or
7525 number of arguments.
7526 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
7528 *) Fix test data to work with the above.
7531 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
7532 was already fixed by Eric for 0.9.1 it seems.
7533 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
7535 *) Autodetect FreeBSD3.
7538 *) Fix various bugs in Configure. This affects the following platforms:
7542 unixware-2.0-pentium
7546 *) Eliminate generated files from CVS. Reorder tests to regenerate files
7547 before they are needed.
7550 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
7554 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
7556 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
7557 changed SSLeay to OpenSSL in version strings.
7558 [Ralf S. Engelschall]
7560 *) Some fixups to the top-level documents.
7563 *) Fixed the nasty bug where rsaref.h was not found under compile-time
7564 because the symlink to include/ was missing.
7565 [Ralf S. Engelschall]
7567 *) Incorporated the popular no-RSA/DSA-only patches
7568 which allow to compile a RSA-free SSLeay.
7569 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
7571 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
7572 when "ssleay" is still not found.
7573 [Ralf S. Engelschall]
7575 *) Added more platforms to Configure: Cray T3E, HPUX 11,
7576 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
7578 *) Updated the README file.
7579 [Ralf S. Engelschall]
7581 *) Added various .cvsignore files in the CVS repository subdirs
7582 to make a "cvs update" really silent.
7583 [Ralf S. Engelschall]
7585 *) Recompiled the error-definition header files and added
7586 missing symbols to the Win32 linker tables.
7587 [Ralf S. Engelschall]
7589 *) Cleaned up the top-level documents;
7590 o new files: CHANGES and LICENSE
7591 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
7592 o merged COPYRIGHT into LICENSE
7593 o removed obsolete TODO file
7594 o renamed MICROSOFT to INSTALL.W32
7595 [Ralf S. Engelschall]
7597 *) Removed dummy files from the 0.9.1b source tree:
7598 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
7599 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
7600 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
7601 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
7602 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
7603 [Ralf S. Engelschall]
7605 *) Added various platform portability fixes.
7608 *) The Genesis of the OpenSSL rpject:
7609 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
7610 Young and Tim J. Hudson created while they were working for C2Net until
7612 [The OpenSSL Project]
7615 Changes between 0.9.0b and 0.9.1b [not released]
7617 *) Updated a few CA certificates under certs/
7620 *) Changed some BIGNUM api stuff.
7623 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
7624 DGUX x86, Linux Alpha, etc.
7627 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
7628 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
7632 *) Add -strparse option to asn1pars program which parses nested
7634 [Dr Stephen Henson <shenson@bigfoot.com>]
7636 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
7639 *) DSA fix for "ca" program.
7642 *) Added "-genkey" option to "dsaparam" program.
7645 *) Added RIPE MD160 (rmd160) message digest.
7648 *) Added -a (all) option to "ssleay version" command.
7651 *) Added PLATFORM define which is the id given to Configure.
7654 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
7657 *) Extended the ASN.1 parser routines.
7660 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
7663 *) Added a BN_CTX to the BN library.
7666 *) Fixed the weak key values in DES library
7669 *) Changed API in EVP library for cipher aliases.
7672 *) Added support for RC2/64bit cipher.
7675 *) Converted the lhash library to the crypto/mem.c functions.
7678 *) Added more recognized ASN.1 object ids.
7681 *) Added more RSA padding checks for SSL/TLS.
7684 *) Added BIO proxy/filter functionality.
7687 *) Added extra_certs to SSL_CTX which can be used
7688 send extra CA certificates to the client in the CA cert chain sending
7689 process. It can be configured with SSL_CTX_add_extra_chain_cert().
7692 *) Now Fortezza is denied in the authentication phase because
7693 this is key exchange mechanism is not supported by SSLeay at all.
7696 *) Additional PKCS1 checks.
7699 *) Support the string "TLSv1" for all TLS v1 ciphers.
7702 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
7703 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
7706 *) Fixed a few memory leaks.
7709 *) Fixed various code and comment typos.
7712 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
7713 bytes sent in the client random.
7714 [Edward Bishop <ebishop@spyglass.com>]
projects / oweals / openssl.git / blob