5 Changes between 0.9.4 and 0.9.5 [xx XXX 1999]
7 *) Fix for 'req': it was adding a null to request attributes.
8 Also change the X509_LOOKUP and X509_INFO code to handle
9 certificate auxiliary information.
12 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
16 *) Add the possibility to add extra information to the memory leak
17 detecting output, to form tracebacks, showing from where each
18 allocation was originated. Also updated sid code to be multi-
22 *) Add options -text and -noout to pkcs7 utility and delete the
23 encryption options which never did anything. Update docs.
26 *) Add options to some of the utilities to allow the pass phrase
27 to be included on either the command line (not recommended on
28 OSes like Unix) or read from the environment. Update the
29 manpages and fix a few bugs.
32 *) Add a few manpages for some of the openssl commands.
35 *) Fix the -revoke option in ca. It was freeing up memory twice,
36 leaking and not finding already revoked certificates.
39 *) Extensive changes to support certificate auxiliary information.
40 This involves the use of X509_CERT_AUX structure and X509_AUX
41 functions. An X509_AUX function such as PEM_read_X509_AUX()
42 can still read in a certificate file in the usual way but it
43 will also read in any additional "auxiliary information". By
44 doing things this way a fair degree of compatability can be
45 retained: existing certificates can have this information added
46 using the new 'x509' options.
48 Current auxiliary information includes an "alias" and some trust
49 settings. The trust settings will ultimately be used in enhanced
50 certificate chain verification routines: currently a certificate
51 can only be trusted if it is self signed and then it is trusted
55 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD). The
56 problem was that one of the replacement routines had not been working since
57 SSLeay releases. For now the offending routine has been replaced with
58 non-optimised assembler. Even so, this now gives around 95% performance
59 improvement for 1024 bit RSA signs.
62 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
63 handling. Most clients have the effective key size in bits equal to
64 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
65 A few however don't do this and instead use the size of the decrypted key
66 to determine the RC2 key length and the AlgorithmIdentifier to determine
67 the effective key length. In this case the effective key lenth can still
68 be 40 bits but the key length can be 168 bits for example. This is fixed
69 by manually forcing an RC2 key into the EVP_PKEY structure because the
70 EVP code can't currently handle unusual RC2 key sizes: it always assumes
71 the key length and effective key length are equal.
74 *) Add a bunch of functions that should simplify the creation of
75 X509_NAME structures. Now you should be able to do:
76 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
77 and have it automatically work out the correct field type and fill in
78 the structures. The more adventurous can try:
79 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
80 and it will (hopefully) work out the correct multibyte encoding.
83 *) Change the 'req' utility to use the new field handling and multibyte
84 copy routines. Before the DN field creation was handled in an ad hoc
85 way in req, ca, and x509 which was rather broken and didn't support
86 BMPStrings or UTF8Strings. Since some software doesn't implement
87 BMPStrings or UTF8Strings yet, they can be enabled using the config file
88 using the dirstring_type option. See the new comment in the default
89 openssl.cnf for more info.
92 *) Make crypto/rand/md_rand.c more robust:
93 - Assure unique random numbers after fork().
94 - Make sure that concurrent threads access the global counter and
95 md serializably so that we never lose entropy in them
96 or use exactly the same state in multiple threads.
97 Access to the large state is not always serializable because
98 the additional locking could be a performance killer, and
99 md should be large enough anyway.
102 *) New file apps/app_rand.c with commonly needed functionality
103 for handling the random seed file.
105 Use the random seed file in some applications that previously did not:
107 dsaparam -genkey (which also ignored its `-rand' option),
111 Except on systems with /dev/urandom, it is crucial to have a random
112 seed file at least for key creation, DSA signing, and for DH exchanges;
113 for RSA signatures we could do without one.
115 gendh and gendsa (unlike genrsa) used to read only the first byte
116 of each file listed in the `-rand' option. The function as previously
117 found in genrsa is now in app_rand.c and is used by all programs
118 that support `-rand'.
121 *) In RAND_write_file, use mode 0600 for creating files;
122 don't just chmod when it may be too late.
125 *) Report an error from X509_STORE_load_locations
126 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
129 *) New function ASN1_mbstring_copy() this copies a string in either
130 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
131 into an ASN1_STRING type. A mask of permissible types is passed
132 and it chooses the "minimal" type to use or an error if not type
136 *) Add function equivalents to the various macros in asn1.h. The old
137 macros are retained with an M_ prefix. Code inside the library can
138 use the M_ macros. External code (including the openssl utility)
139 should *NOT* in order to be "shared library friendly".
142 *) Add various functions that can check a certificate's extensions
143 to see if it usable for various purposes such as SSL client,
144 server or S/MIME and CAs of these types. This is currently
145 VERY EXPERIMENTAL but will ultimately be used for certificate chain
146 verification. Also added a -purpose flag to x509 utility to
147 print out all the purposes.
150 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
154 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
155 for, obtain and decode and extension and obtain its critical flag.
156 This allows all the necessary extension code to be handled in a
157 single function call.
160 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
161 platforms. See crypto/rc4/rc4_enc.c for further details.
164 *) New -noout option to asn1parse. This causes no output to be produced
165 its main use is when combined with -strparse and -out to extract data
166 from a file (which may not be in ASN.1 format).
169 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
170 when producing the local key id.
171 [Richard Levitte <levitte@stacken.kth.se>]
173 *) New option -dhparam in s_server. This allows a DH parameter file to be
174 stated explicitly. If it is not stated then it tries the first server
175 certificate file. The previous behaviour hard coded the filename
179 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
180 a public key to be input or output. For example:
181 openssl rsa -in key.pem -pubout -out pubkey.pem
182 Also added necessary DSA public key functions to handle this.
185 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
186 in the message. This was handled by allowing
187 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
188 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
190 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
191 to the end of the strings whereas this didn't. This would cause problems
192 if strings read with d2i_ASN1_bytes() were later modified.
193 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
195 *) Fix for base64 decode bug. When a base64 bio reads only one line of
196 data and it contains EOF it will end up returning an error. This is
197 caused by input 46 bytes long. The cause is due to the way base64
198 BIOs find the start of base64 encoded data. They do this by trying a
199 trial decode on each line until they find one that works. When they
200 do a flag is set and it starts again knowing it can pass all the
201 data directly through the decoder. Unfortunately it doesn't reset
202 the context it uses. This means that if EOF is reached an attempt
203 is made to pass two EOFs through the context and this causes the
204 resulting error. This can also cause other problems as well. As is
205 usual with these problems it takes *ages* to find and the fix is
206 trivial: move one line.
207 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
209 *) Ugly workaround to get s_client and s_server working under Windows. The
210 old code wouldn't work because it needed to select() on sockets and the
211 tty (for keypresses and to see if data could be written). Win32 only
212 supports select() on sockets so we select() with a 1s timeout on the
213 sockets and then see if any characters are waiting to be read, if none
214 are present then we retry, we also assume we can always write data to
215 the tty. This isn't nice because the code then blocks until we've
216 received a complete line of data and it is effectively polling the
217 keyboard at 1s intervals: however it's quite a bit better than not
218 working at all :-) A dedicated Windows application might handle this
219 with an event loop for example.
222 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
223 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
224 will be called when RSA_sign() and RSA_verify() are used. This is useful
225 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
226 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
227 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
228 This necessitated the support of an extra signature type NID_md5_sha1
229 for SSL signatures and modifications to the SSL library to use it instead
230 of calling RSA_public_decrypt() and RSA_private_encrypt().
233 *) Add new -verify -CAfile and -CApath options to the crl program, these
234 will lookup a CRL issuers certificate and verify the signature in a
235 similar way to the verify program. Tidy up the crl program so it
236 no longer acesses structures directly. Make the ASN1 CRL parsing a bit
237 less strict. It will now permit CRL extensions even if it is not
238 a V2 CRL: this will allow it to tolerate some broken CRLs.
241 *) Initialize all non-automatic variables each time one of the openssl
242 sub-programs is started (this is necessary as they may be started
243 multiple times from the "OpenSSL>" prompt).
244 [Lennart Bang, Bodo Moeller]
246 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
247 removing all other RSA functionality (this is what NO_RSA does). This
248 is so (for example) those in the US can disable those operations covered
249 by the RSA patent while allowing storage and parsing of RSA keys and RSA
253 *) Non-copying interface to BIO pairs.
254 (still largely untested)
257 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
258 ASCII string. This was handled independently in various places before.
261 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
262 UTF8 strings a character at a time.
265 *) Use client_version from client hello to select the protocol
266 (s23_srvr.c) and for RSA client key exchange verification
267 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
270 *) Add various utility functions to handle SPKACs, these were previously
271 handled by poking round in the structure internals. Added new function
272 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
273 print, verify and generate SPKACs. Based on an original idea from
274 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
277 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
280 *) Allow the config file extension section to be overwritten on the
281 command line. Based on an original idea from Massimiliano Pala
282 <madwolf@comune.modena.it>. The new option is called -extensions
283 and can be applied to ca, req and x509. Also -reqexts to override
284 the request extensions in req and -crlexts to override the crl extensions
288 *) Add new feature to the SPKAC handling in ca. Now you can include
289 the same field multiple times by preceding it by "XXXX." for example:
292 this is the same syntax as used in the req config file.
295 *) Allow certificate extensions to be added to certificate requests. These
296 are specified in a 'req_extensions' option of the req section of the
297 config file. They can be printed out with the -text option to req but
298 are otherwise ignored at present.
301 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
302 data read consists of only the final block it would not decrypted because
303 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
304 A misplaced 'break' also meant the decrypted final block might not be
305 copied until the next read.
308 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
309 a few extra parameters to the DH structure: these will be useful if
310 for example we want the value of 'q' or implement X9.42 DH.
313 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
314 provides hooks that allow the default DSA functions or functions on a
315 "per key" basis to be replaced. This allows hardware acceleration and
316 hardware key storage to be handled without major modification to the
317 library. Also added low level modexp hooks and CRYPTO_EX structure and
318 associated functions.
321 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
322 as "read only": it can't be written to and the buffer it points to will
323 not be freed. Reading from a read only BIO is much more efficient than
324 a normal memory BIO. This was added because there are several times when
325 an area of memory needs to be read from a BIO. The previous method was
326 to create a memory BIO and write the data to it, this results in two
327 copies of the data and an O(n^2) reading algorithm. There is a new
328 function BIO_new_mem_buf() which creates a read only memory BIO from
329 an area of memory. Also modified the PKCS#7 routines to use read only
333 *) Bugfix: ssl23_get_client_hello did not work properly when called in
334 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
335 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
336 but a retry condition occured while trying to read the rest.
339 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
340 NID_pkcs7_encrypted by default: this was wrong since this should almost
341 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
342 the encrypted data type: this is a more sensible place to put it and it
343 allows the PKCS#12 code to be tidied up that duplicated this
347 *) Changed obj_dat.pl script so it takes its input and output files on
348 the command line. This should avoid shell escape redirection problems
352 *) Initial support for certificate extension requests, these are included
353 in things like Xenroll certificate requests. Included functions to allow
354 extensions to be obtained and added.
357 *) -crlf option to s_client and s_server for sending newlines as
358 CRLF (as required by many protocols).
361 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
363 *) Install libRSAglue.a when OpenSSL is built with RSAref.
364 [Ralf S. Engelschall]
366 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
367 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
369 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
373 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
374 DH parameters/keys (q is lost during that conversion, but the resulting
375 DH parameters contain its length).
377 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
378 much faster than DH_generate_parameters (which creates parameters
379 where p = 2*q + 1), and also the smaller q makes DH computations
380 much more efficient (160-bit exponentiation instead of 1024-bit
381 exponentiation); so this provides a convenient way to support DHE
382 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
383 utter importance to use
384 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
386 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
387 when such DH parameters are used, because otherwise small subgroup
388 attacks may become possible!
391 *) Avoid memory leak in i2d_DHparams.
394 *) Allow the -k option to be used more than once in the enc program:
395 this allows the same encrypted message to be read by multiple recipients.
398 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
399 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
400 it will always use the numerical form of the OID, even if it has a short
404 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
405 method only got called if p,q,dmp1,dmq1,iqmp components were present,
406 otherwise bn_mod_exp was called. In the case of hardware keys for example
407 no private key components need be present and it might store extra data
408 in the RSA structure, which cannot be accessed from bn_mod_exp.
409 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
410 private key operations.
413 *) Added support for SPARC Linux.
416 *) pem_password_cb function type incompatibly changed from
417 typedef int pem_password_cb(char *buf, int size, int rwflag);
419 ....(char *buf, int size, int rwflag, void *userdata);
420 so that applications can pass data to their callbacks:
421 The PEM[_ASN1]_{read,write}... functions and macros now take an
422 additional void * argument, which is just handed through whenever
423 the password callback is called.
424 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
426 New function SSL_CTX_set_default_passwd_cb_userdata.
428 Compatibility note: As many C implementations push function arguments
429 onto the stack in reverse order, the new library version is likely to
430 interoperate with programs that have been compiled with the old
431 pem_password_cb definition (PEM_whatever takes some data that
432 happens to be on the stack as its last argument, and the callback
433 just ignores this garbage); but there is no guarantee whatsoever that
436 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
437 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
438 problems not only on Windows, but also on some Unix platforms.
439 To avoid problematic command lines, these definitions are now in an
440 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
441 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
444 *) MIPS III/IV assembler module is reimplemented.
447 *) More DES library cleanups: remove references to srand/rand and
448 delete an unused file.
451 *) Add support for the the free Netwide assembler (NASM) under Win32,
452 since not many people have MASM (ml) and it can be hard to obtain.
453 This is currently experimental but it seems to work OK and pass all
454 the tests. Check out INSTALL.W32 for info.
457 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
458 without temporary keys kept an extra copy of the server key,
459 and connections with temporary keys did not free everything in case
463 *) New function RSA_check_key and new openssl rsa option -check
464 for verifying the consistency of RSA keys.
465 [Ulf Moeller, Bodo Moeller]
467 *) Various changes to make Win32 compile work:
468 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
469 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
470 comparison" warnings.
471 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
474 *) Add a debugging option to PKCS#5 v2 key generation function: when
475 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
476 derived keys are printed to stderr.
479 *) Copy the flags in ASN1_STRING_dup().
480 [Roman E. Pavlov <pre@mo.msk.ru>]
482 *) The x509 application mishandled signing requests containing DSA
483 keys when the signing key was also DSA and the parameters didn't match.
485 It was supposed to omit the parameters when they matched the signing key:
486 the verifying software was then supposed to automatically use the CA's
487 parameters if they were absent from the end user certificate.
489 Omitting parameters is no longer recommended. The test was also
490 the wrong way round! This was probably due to unusual behaviour in
491 EVP_cmp_parameters() which returns 1 if the parameters match.
492 This meant that parameters were omitted when they *didn't* match and
493 the certificate was useless. Certificates signed with 'ca' didn't have
495 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
497 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
498 The interface is as follows:
500 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
501 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
502 "off" is now the default.
503 The library internally uses
504 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
505 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
506 to disable memory-checking temporarily.
508 Some inconsistent states that previously were possible (and were
509 even the default) are now avoided.
511 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
512 with each memory chunk allocated; this is occasionally more helpful
513 than just having a counter.
515 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
517 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
521 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
522 which largely parallels "options", but is for changing API behaviour,
523 whereas "options" are about protocol behaviour.
524 Initial "mode" flags are:
526 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
527 a single record has been written.
528 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
529 retries use the same buffer location.
530 (But all of the contents must be
534 *) Bugfix: SSL_set_mode ignored its parameter, only SSL_CTX_set_mode
537 *) Fix problems with no-hmac etc.
538 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
540 *) New functions RSA_get_default_method(), RSA_set_method() and
541 RSA_get_method(). These allows replacement of RSA_METHODs without having
542 to mess around with the internals of an RSA structure.
545 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
546 Also really enable memory leak checks in openssl.c and in some
548 [Chad C. Mulligan, Bodo Moeller]
550 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
551 up the length of negative integers. This has now been simplified to just
552 store the length when it is first determined and use it later, rather
553 than trying to keep track of where data is copied and updating it to
555 [Steve Henson, reported by Brien Wheeler
556 <bwheeler@authentica-security.com>]
558 *) Add a new function PKCS7_signatureVerify. This allows the verification
559 of a PKCS#7 signature but with the signing certificate passed to the
560 function itself. This contrasts with PKCS7_dataVerify which assumes the
561 certificate is present in the PKCS#7 structure. This isn't always the
562 case: certificates can be omitted from a PKCS#7 structure and be
563 distributed by "out of band" means (such as a certificate database).
566 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
567 function prototypes in pem.h, also change util/mkdef.pl to add the
568 necessary function names.
571 *) mk1mf.pl (used by Windows builds) did not properly read the
572 options set by Configure in the top level Makefile, and Configure
573 was not even able to write more than one option correctly.
574 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
577 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
578 file to be loaded from a BIO or FILE pointer. The BIO version will
579 for example allow memory BIOs to contain config info.
582 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
583 Whoever hopes to achieve shared-library compatibility across versions
584 must use this, not the compile-time macro.
585 (Exercise 0.9.4: Which is the minimum library version required by
587 Note: All this applies only to multi-threaded programs, others don't
591 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
592 through a BIO pair triggered the default case, i.e.
593 SSLerr(...,SSL_R_UNKNOWN_STATE).
596 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
597 can use the SSL library even if none of the specific BIOs is
601 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
602 for the encoded length.
603 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
605 *) Add initial documentation of the X509V3 functions.
608 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
609 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
610 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
611 secure PKCS#8 private key format with a high iteration count.
614 *) Fix determination of Perl interpreter: A perl or perl5
615 _directory_ in $PATH was also accepted as the interpreter.
616 [Ralf S. Engelschall]
618 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
619 wrong with it but it was very old and did things like calling
620 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
624 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
625 to use the new extension code.
628 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
629 with macros. This should make it easier to change their form, add extra
630 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
634 *) Add to configuration table a new entry that can specify an alternative
635 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
636 according to Mark Crispin <MRC@Panda.COM>.
640 *) DES CBC did not update the IV. Weird.
643 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
644 Changing the behaviour of the former might break existing programs --
645 where IV updating is needed, des_ncbc_encrypt can be used.
648 *) When bntest is run from "make test" it drives bc to check its
649 calculations, as well as internally checking them. If an internal check
650 fails, it needs to cause bc to give a non-zero result or make test carries
651 on without noticing the failure. Fixed.
654 *) DES library cleanups.
657 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
658 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
659 ciphers. NOTE: although the key derivation function has been verified
660 against some published test vectors it has not been extensively tested
661 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
665 *) Instead of "mkdir -p", which is not fully portable, use new
666 Perl script "util/mkdir-p.pl".
669 *) Rewrite the way password based encryption (PBE) is handled. It used to
670 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
671 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
672 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
673 the 'parameter' field of the AlgorithmIdentifier is passed to the
674 underlying key generation function so it must do its own ASN1 parsing.
675 This has also changed the EVP_PBE_CipherInit() function which now has a
676 'parameter' argument instead of literal salt and iteration count values
677 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
680 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
681 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
682 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
683 KEY" because this clashed with PKCS#8 unencrypted string. Since this
684 value was just used as a "magic string" and not used directly its
685 value doesn't matter.
688 *) Introduce some semblance of const correctness to BN. Shame C doesn't
692 *) "linux-sparc64" configuration (ultrapenguin).
693 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
694 "linux-sparc" configuration.
695 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
697 *) config now generates no-xxx options for missing ciphers.
700 *) Support the EBCDIC character set (work in progress).
701 File ebcdic.c not yet included because it has a different license.
702 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
704 *) Support BS2000/OSD-POSIX.
705 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
707 *) Make callbacks for key generation use void * instead of char *.
710 *) Make S/MIME samples compile (not yet tested).
713 *) Additional typesafe stacks.
716 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
720 Changes between 0.9.3 and 0.9.3a [29 May 1999]
722 *) New configuration variant "sco5-gcc".
724 *) Updated some demos.
725 [Sean O Riordain, Wade Scholine]
727 *) Add missing BIO_free at exit of pkcs12 application.
730 *) Fix memory leak in conf.c.
733 *) Updates for Win32 to assembler version of MD5.
736 *) Set #! path to perl in apps/der_chop to where we found it
737 instead of using a fixed path.
740 *) SHA library changes for irix64-mips4-cc.
743 *) Improvements for VMS support.
747 Changes between 0.9.2b and 0.9.3 [24 May 1999]
749 *) Bignum library bug fix. IRIX 6 passes "make test" now!
750 This also avoids the problems with SC4.2 and unpatched SC5.
751 [Andy Polyakov <appro@fy.chalmers.se>]
753 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
754 These are required because of the typesafe stack would otherwise break
755 existing code. If old code used a structure member which used to be STACK
756 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
757 sk_num or sk_value it would produce an error because the num, data members
758 are not present in STACK_OF. Now it just produces a warning. sk_set
759 replaces the old method of assigning a value to sk_value
760 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
761 that does this will no longer work (and should use sk_set instead) but
762 this could be regarded as a "questionable" behaviour anyway.
765 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
766 correctly handle encrypted S/MIME data.
769 *) Change type of various DES function arguments from des_cblock
770 (which means, in function argument declarations, pointer to char)
771 to des_cblock * (meaning pointer to array with 8 char elements),
772 which allows the compiler to do more typechecking; it was like
773 that back in SSLeay, but with lots of ugly casts.
775 Introduce new type const_des_cblock.
778 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
779 problems: find RecipientInfo structure that matches recipient certificate
780 and initialise the ASN1 structures properly based on passed cipher.
783 *) Belatedly make the BN tests actually check the results.
786 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
787 to and from BNs: it was completely broken. New compilation option
788 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
789 key elements as negative integers.
792 *) Reorganize and speed up MD5.
793 [Andy Polyakov <appro@fy.chalmers.se>]
796 [Richard Levitte <richard@levitte.org>]
798 *) New option -out to asn1parse to allow the parsed structure to be
799 output to a file. This is most useful when combined with the -strparse
800 option to examine the output of things like OCTET STRINGS.
803 *) Make SSL library a little more fool-proof by not requiring any longer
804 that SSL_set_{accept,connect}_state be called before
805 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
806 in many applications because usually everything *appeared* to work as
807 intended anyway -- now it really works as intended).
810 *) Move openssl.cnf out of lib/.
813 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
814 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
815 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
816 [Ralf S. Engelschall]
818 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
819 handle PKCS#7 enveloped data properly.
820 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
822 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
823 copying pointers. The cert_st handling is changed by this in
824 various ways (and thus what used to be known as ctx->default_cert
825 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
826 any longer when s->cert does not give us what we need).
827 ssl_cert_instantiate becomes obsolete by this change.
828 As soon as we've got the new code right (possibly it already is?),
829 we have solved a couple of bugs of the earlier code where s->cert
830 was used as if it could not have been shared with other SSL structures.
832 Note that using the SSL API in certain dirty ways now will result
833 in different behaviour than observed with earlier library versions:
834 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
835 does not influence s as it used to.
837 In order to clean up things more thoroughly, inside SSL_SESSION
838 we don't use CERT any longer, but a new structure SESS_CERT
839 that holds per-session data (if available); currently, this is
840 the peer's certificate chain and, for clients, the server's certificate
841 and temporary key. CERT holds only those values that can have
842 meaningful defaults in an SSL_CTX.
845 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
846 from the internal representation. Various PKCS#7 fixes: remove some
847 evil casts and set the enc_dig_alg field properly based on the signing
851 *) Allow PKCS#12 password to be set from the command line or the
852 environment. Let 'ca' get its config file name from the environment
853 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
857 *) Allow certificate policies extension to use an IA5STRING for the
858 organization field. This is contrary to the PKIX definition but
859 VeriSign uses it and IE5 only recognises this form. Document 'x509'
863 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
864 without disallowing inline assembler and the like for non-pedantic builds.
867 *) Support Borland C++ builder.
868 [Janez Jere <jj@void.si>, modified by Ulf Möller]
873 *) SHA-1 cleanups and performance enhancements.
874 [Andy Polyakov <appro@fy.chalmers.se>]
876 *) Sparc v8plus assembler for the bignum library.
877 [Andy Polyakov <appro@fy.chalmers.se>]
879 *) Accept any -xxx and +xxx compiler options in Configure.
882 *) Update HPUX configuration.
885 *) Add missing sk_<type>_unshift() function to safestack.h
886 [Ralf S. Engelschall]
888 *) New function SSL_CTX_use_certificate_chain_file that sets the
889 "extra_cert"s in addition to the certificate. (This makes sense
890 only for "PEM" format files, as chains as a whole are not
894 *) Support verify_depth from the SSL API.
895 x509_vfy.c had what can be considered an off-by-one-error:
896 Its depth (which was not part of the external interface)
897 was actually counting the number of certificates in a chain;
898 now it really counts the depth.
901 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
902 instead of X509err, which often resulted in confusing error
903 messages since the error codes are not globally unique
904 (e.g. an alleged error in ssl3_accept when a certificate
905 didn't match the private key).
907 *) New function SSL_CTX_set_session_id_context that allows to set a default
908 value (so that you don't need SSL_set_session_id_context for each
909 connection using the SSL_CTX).
912 *) OAEP decoding bug fix.
915 *) Support INSTALL_PREFIX for package builders, as proposed by
919 *) New Configure options "threads" and "no-threads". For systems
920 where the proper compiler options are known (currently Solaris
921 and Linux), "threads" is the default.
924 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
927 *) Install various scripts to $(OPENSSLDIR)/misc, not to
928 $(INSTALLTOP)/bin -- they shouldn't clutter directories
929 such as /usr/local/bin.
932 *) "make linux-shared" to build shared libraries.
933 [Niels Poppe <niels@netbox.org>]
935 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
938 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
939 extension adding in x509 utility.
942 *) Remove NOPROTO sections and error code comments.
945 *) Partial rewrite of the DEF file generator to now parse the ANSI
949 *) New Configure options --prefix=DIR and --openssldir=DIR.
952 *) Complete rewrite of the error code script(s). It is all now handled
953 by one script at the top level which handles error code gathering,
954 header rewriting and C source file generation. It should be much better
955 than the old method: it now uses a modified version of Ulf's parser to
956 read the ANSI prototypes in all header files (thus the old K&R definitions
957 aren't needed for error creation any more) and do a better job of
958 translating function codes into names. The old 'ASN1 error code imbedded
959 in a comment' is no longer necessary and it doesn't use .err files which
960 have now been deleted. Also the error code call doesn't have to appear all
961 on one line (which resulted in some large lines...).
964 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
967 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
968 0 (which usually indicates a closed connection), but continue reading.
971 *) Fix some race conditions.
974 *) Add support for CRL distribution points extension. Add Certificate
975 Policies and CRL distribution points documentation.
978 *) Move the autogenerated header file parts to crypto/opensslconf.h.
981 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
982 8 of keying material. Merlin has also confirmed interop with this fix
983 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
984 [Merlin Hughes <merlin@baltimore.ie>]
986 *) Fix lots of warnings.
987 [Richard Levitte <levitte@stacken.kth.se>]
989 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
990 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
991 [Richard Levitte <levitte@stacken.kth.se>]
993 *) Fix problems with sizeof(long) == 8.
994 [Andy Polyakov <appro@fy.chalmers.se>]
996 *) Change functions to ANSI C.
999 *) Fix typos in error codes.
1000 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
1002 *) Remove defunct assembler files from Configure.
1005 *) SPARC v8 assembler BIGNUM implementation.
1006 [Andy Polyakov <appro@fy.chalmers.se>]
1008 *) Support for Certificate Policies extension: both print and set.
1009 Various additions to support the r2i method this uses.
1012 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
1013 return a const string when you are expecting an allocated buffer.
1016 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
1017 types DirectoryString and DisplayText.
1020 *) Add code to allow r2i extensions to access the configuration database,
1021 add an LHASH database driver and add several ctx helper functions.
1024 *) Fix an evil bug in bn_expand2() which caused various BN functions to
1025 fail when they extended the size of a BIGNUM.
1028 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
1029 support typesafe stack.
1032 *) Fix typo in SSL_[gs]et_options().
1033 [Nils Frostberg <nils@medcom.se>]
1035 *) Delete various functions and files that belonged to the (now obsolete)
1036 old X509V3 handling code.
1039 *) New Configure option "rsaref".
1042 *) Don't auto-generate pem.h.
1045 *) Introduce type-safe ASN.1 SETs.
1048 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
1049 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
1051 *) Introduce type-safe STACKs. This will almost certainly break lots of code
1052 that links with OpenSSL (well at least cause lots of warnings), but fear
1053 not: the conversion is trivial, and it eliminates loads of evil casts. A
1054 few STACKed things have been converted already. Feel free to convert more.
1055 In the fullness of time, I'll do away with the STACK type altogether.
1058 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
1059 specified in <certfile> by updating the entry in the index.txt file.
1060 This way one no longer has to edit the index.txt file manually for
1061 revoking a certificate. The -revoke option does the gory details now.
1062 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
1064 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
1065 `-text' option at all and this way the `-noout -text' combination was
1066 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
1067 [Ralf S. Engelschall]
1069 *) Make sure a corresponding plain text error message exists for the
1070 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
1071 verify callback function determined that a certificate was revoked.
1072 [Ralf S. Engelschall]
1074 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
1075 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
1076 all available cipers including rc5, which was forgotten until now.
1077 In order to let the testing shell script know which algorithms
1078 are available, a new (up to now undocumented) command
1079 "openssl list-cipher-commands" is used.
1082 *) Bugfix: s_client occasionally would sleep in select() when
1083 it should have checked SSL_pending() first.
1086 *) New functions DSA_do_sign and DSA_do_verify to provide access to
1087 the raw DSA values prior to ASN.1 encoding.
1090 *) Tweaks to Configure
1091 [Niels Poppe <niels@netbox.org>]
1093 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
1097 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
1100 *) New config option to avoid instructions that are illegal on the 80386.
1101 The default code is faster, but requires at least a 486.
1104 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
1105 SSL2_SERVER_VERSION (not used at all) macros, which are now the
1106 same as SSL2_VERSION anyway.
1109 *) New "-showcerts" option for s_client.
1112 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
1113 application. Various cleanups and fixes.
1116 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
1117 modify error routines to work internally. Add error codes and PBE init
1118 to library startup routines.
1121 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
1122 packing functions to asn1 and evp. Changed function names and error
1123 codes along the way.
1126 *) PKCS12 integration: and so it begins... First of several patches to
1127 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
1128 objects to objects.h
1131 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
1132 and display support for Thawte strong extranet extension.
1135 *) Add LinuxPPC support.
1136 [Jeff Dubrule <igor@pobox.org>]
1138 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
1139 bn_div_words in alpha.s.
1140 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
1142 *) Make sure the RSA OAEP test is skipped under -DRSAref because
1143 OAEP isn't supported when OpenSSL is built with RSAref.
1144 [Ulf Moeller <ulf@fitug.de>]
1146 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
1147 so they no longer are missing under -DNOPROTO.
1148 [Soren S. Jorvang <soren@t.dk>]
1151 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
1153 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
1154 doesn't work when the session is reused. Coming soon!
1157 *) Fix a security hole, that allows sessions to be reused in the wrong
1158 context thus bypassing client cert protection! All software that uses
1159 client certs and session caches in multiple contexts NEEDS PATCHING to
1160 allow session reuse! A fuller solution is in the works.
1161 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
1163 *) Some more source tree cleanups (removed obsolete files
1164 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
1165 permission on "config" script to be executable) and a fix for the INSTALL
1167 [Ulf Moeller <ulf@fitug.de>]
1169 *) Remove some legacy and erroneous uses of malloc, free instead of
1171 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
1173 *) Make rsa_oaep_test return non-zero on error.
1174 [Ulf Moeller <ulf@fitug.de>]
1176 *) Add support for native Solaris shared libraries. Configure
1177 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
1178 if someone would make that last step automatic.
1179 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
1181 *) ctx_size was not built with the right compiler during "make links". Fixed.
1184 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
1185 except NULL ciphers". This means the default cipher list will no longer
1186 enable NULL ciphers. They need to be specifically enabled e.g. with
1187 the string "DEFAULT:eNULL".
1190 *) Fix to RSA private encryption routines: if p < q then it would
1191 occasionally produce an invalid result. This will only happen with
1192 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
1195 *) Be less restrictive and allow also `perl util/perlpath.pl
1196 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
1197 because this way one can also use an interpreter named `perl5' (which is
1198 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
1199 installed as `perl').
1200 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1202 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
1203 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1205 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
1206 advapi32.lib to Win32 build and change the pem test comparision
1207 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
1208 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
1209 and crypto/des/ede_cbcm_enc.c.
1212 *) DES quad checksum was broken on big-endian architectures. Fixed.
1215 *) Comment out two functions in bio.h that aren't implemented. Fix up the
1216 Win32 test batch file so it (might) work again. The Win32 test batch file
1217 is horrible: I feel ill....
1220 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
1221 in e_os.h. Audit of header files to check ANSI and non ANSI
1222 sections: 10 functions were absent from non ANSI section and not exported
1223 from Windows DLLs. Fixed up libeay.num for new functions.
1226 *) Make `openssl version' output lines consistent.
1227 [Ralf S. Engelschall]
1229 *) Fix Win32 symbol export lists for BIO functions: Added
1230 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
1231 to ms/libeay{16,32}.def.
1232 [Ralf S. Engelschall]
1234 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
1235 fine under Unix and passes some trivial tests I've now added. But the
1236 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
1237 added to make sure no one expects that this stuff really works in the
1238 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
1239 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
1241 [Ralf S. Engelschall]
1243 *) Fix the generation of two part addresses in perl.
1244 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
1246 *) Add config entry for Linux on MIPS.
1247 [John Tobey <jtobey@channel1.com>]
1249 *) Make links whenever Configure is run, unless we are on Windoze.
1252 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
1253 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
1257 *) Add a useful kludge to allow package maintainers to specify compiler and
1258 other platforms details on the command line without having to patch the
1259 Configure script everytime: One now can use ``perl Configure
1260 <id>:<details>'', i.e. platform ids are allowed to have details appended
1261 to them (seperated by colons). This is treated as there would be a static
1262 pre-configured entry in Configure's %table under key <id> with value
1263 <details> and ``perl Configure <id>'' is called. So, when you want to
1264 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
1265 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
1266 now, which overrides the FreeBSD-elf entry on-the-fly.
1267 [Ralf S. Engelschall]
1269 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
1272 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
1273 on the `perl Configure ...' command line. This way one can compile
1274 OpenSSL libraries with Position Independent Code (PIC) which is needed
1275 for linking it into DSOs.
1276 [Ralf S. Engelschall]
1278 *) Remarkably, export ciphers were totally broken and no-one had noticed!
1282 *) Cleaned up the LICENSE document: The official contact for any license
1283 questions now is the OpenSSL core team under openssl-core@openssl.org.
1284 And add a paragraph about the dual-license situation to make sure people
1285 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
1286 to the OpenSSL toolkit.
1287 [Ralf S. Engelschall]
1289 *) General source tree makefile cleanups: Made `making xxx in yyy...'
1290 display consistent in the source tree and replaced `/bin/rm' by `rm'.
1291 Additonally cleaned up the `make links' target: Remove unnecessary
1292 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
1293 to speed processing and no longer clutter the display with confusing
1294 stuff. Instead only the actually done links are displayed.
1295 [Ralf S. Engelschall]
1297 *) Permit null encryption ciphersuites, used for authentication only. It used
1298 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
1299 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
1303 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
1304 signed attributes when verifying signatures (this would break them),
1305 the detached data encoding was wrong and public keys obtained using
1306 X509_get_pubkey() weren't freed.
1309 *) Add text documentation for the BUFFER functions. Also added a work around
1310 to a Win95 console bug. This was triggered by the password read stuff: the
1311 last character typed gets carried over to the next fread(). If you were
1312 generating a new cert request using 'req' for example then the last
1313 character of the passphrase would be CR which would then enter the first
1317 *) Added the new `Includes OpenSSL Cryptography Software' button as
1318 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
1319 button and can be used by applications based on OpenSSL to show the
1320 relationship to the OpenSSL project.
1321 [Ralf S. Engelschall]
1323 *) Remove confusing variables in function signatures in files
1324 ssl/ssl_lib.c and ssl/ssl.h.
1325 [Lennart Bong <lob@kulthea.stacken.kth.se>]
1327 *) Don't install bss_file.c under PREFIX/include/
1328 [Lennart Bong <lob@kulthea.stacken.kth.se>]
1330 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
1331 functions that return function pointers and has support for NT specific
1332 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
1333 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
1334 unsigned to signed types: this was killing the Win32 compile.
1337 *) Add new certificate file to stack functions,
1338 SSL_add_dir_cert_subjects_to_stack() and
1339 SSL_add_file_cert_subjects_to_stack(). These largely supplant
1340 SSL_load_client_CA_file(), and can be used to add multiple certs easily
1341 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
1342 This means that Apache-SSL and similar packages don't have to mess around
1343 to add as many CAs as they want to the preferred list.
1346 *) Experiment with doxygen documentation. Currently only partially applied to
1348 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
1349 openssl.doxy as the configuration file.
1352 *) Get rid of remaining C++-style comments which strict C compilers hate.
1353 [Ralf S. Engelschall, pointed out by Carlos Amengual]
1355 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
1356 compiled in by default: it has problems with large keys.
1359 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
1360 DH private keys and/or callback functions which directly correspond to
1361 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
1362 is needed for applications which have to configure certificates on a
1363 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
1365 For the RSA certificate situation is makes no difference, but
1366 for the DSA certificate situation this fixes the "no shared cipher"
1367 problem where the OpenSSL cipher selection procedure failed because the
1368 temporary keys were not overtaken from the context and the API provided
1369 no way to reconfigure them.
1370 The new functions now let applications reconfigure the stuff and they
1371 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
1372 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
1373 non-public-API function ssl_cert_instantiate() is used as a helper
1374 function and also to reduce code redundancy inside ssl_rsa.c.
1375 [Ralf S. Engelschall]
1377 *) Move s_server -dcert and -dkey options out of the undocumented feature
1378 area because they are useful for the DSA situation and should be
1379 recognized by the users.
1380 [Ralf S. Engelschall]
1382 *) Fix the cipher decision scheme for export ciphers: the export bits are
1383 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
1384 SSL_EXP_MASK. So, the original variable has to be used instead of the
1385 already masked variable.
1386 [Richard Levitte <levitte@stacken.kth.se>]
1388 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
1389 [Richard Levitte <levitte@stacken.kth.se>]
1391 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
1392 from `int' to `unsigned int' because it's a length and initialized by
1393 EVP_DigestFinal() which expects an `unsigned int *'.
1394 [Richard Levitte <levitte@stacken.kth.se>]
1396 *) Don't hard-code path to Perl interpreter on shebang line of Configure
1397 script. Instead use the usual Shell->Perl transition trick.
1398 [Ralf S. Engelschall]
1400 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
1401 (in addition to RSA certificates) to match the behaviour of `openssl dsa
1402 -noout -modulus' as it's already the case for `openssl rsa -noout
1403 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
1404 currently the public key is printed (a decision which was already done by
1405 `openssl dsa -modulus' in the past) which serves a similar purpose.
1406 Additionally the NO_RSA no longer completely removes the whole -modulus
1407 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
1409 [Ralf S. Engelschall]
1411 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
1412 BIO. See the source (crypto/evp/bio_ok.c) for more info.
1413 [Arne Ansper <arne@ats.cyber.ee>]
1415 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
1416 to be added. Now both 'req' and 'ca' can use new objects defined in the
1420 *) Add cool BIO that does syslog (or event log on NT).
1421 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
1423 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
1424 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
1425 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
1426 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
1429 *) Add preliminary config info for new extension code.
1432 *) Make RSA_NO_PADDING really use no padding.
1433 [Ulf Moeller <ulf@fitug.de>]
1435 *) Generate errors when private/public key check is done.
1438 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
1439 for some CRL extensions and new objects added.
1442 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
1443 key usage extension and fuller support for authority key id.
1446 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
1447 padding method for RSA, which is recommended for new applications in PKCS
1448 #1 v2.0 (RFC 2437, October 1998).
1449 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
1450 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
1451 against Bleichbacher's attack on RSA.
1452 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
1455 *) Updates to the new SSL compression code
1456 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1458 *) Fix so that the version number in the master secret, when passed
1459 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
1460 (because the server will not accept higher), that the version number
1461 is 0x03,0x01, not 0x03,0x00
1462 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1464 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
1465 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
1466 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
1469 *) Support for RAW extensions where an arbitrary extension can be
1470 created by including its DER encoding. See apps/openssl.cnf for
1474 *) Make sure latest Perl versions don't interpret some generated C array
1475 code as Perl array code in the crypto/err/err_genc.pl script.
1476 [Lars Weber <3weber@informatik.uni-hamburg.de>]
1478 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
1479 not many people have the assembler. Various Win32 compilation fixes and
1480 update to the INSTALL.W32 file with (hopefully) more accurate Win32
1484 *) Modify configure script 'Configure' to automatically create crypto/date.h
1485 file under Win32 and also build pem.h from pem.org. New script
1486 util/mkfiles.pl to create the MINFO file on environments that can't do a
1487 'make files': perl util/mkfiles.pl >MINFO should work.
1490 *) Major rework of DES function declarations, in the pursuit of correctness
1491 and purity. As a result, many evil casts evaporated, and some weirdness,
1492 too. You may find this causes warnings in your code. Zapping your evil
1493 casts will probably fix them. Mostly.
1496 *) Fix for a typo in asn1.h. Bug fix to object creation script
1497 obj_dat.pl. It considered a zero in an object definition to mean
1498 "end of object": none of the objects in objects.h have any zeros
1499 so it wasn't spotted.
1500 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
1502 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
1503 Masking (CBCM). In the absence of test vectors, the best I have been able
1504 to do is check that the decrypt undoes the encrypt, so far. Send me test
1505 vectors if you have them.
1508 *) Correct calculation of key length for export ciphers (too much space was
1509 allocated for null ciphers). This has not been tested!
1512 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
1513 message is now correct (it understands "crypto" and "ssl" on its
1514 command line). There is also now an "update" option. This will update
1515 the util/ssleay.num and util/libeay.num files with any new functions.
1517 perl util/mkdef.pl crypto ssl update
1518 it will update them.
1521 *) Overhauled the Perl interface (perl/*):
1522 - ported BN stuff to OpenSSL's different BN library
1523 - made the perl/ source tree CVS-aware
1524 - renamed the package from SSLeay to OpenSSL (the files still contain
1525 their history because I've copied them in the repository)
1526 - removed obsolete files (the test scripts will be replaced
1527 by better Test::Harness variants in the future)
1528 [Ralf S. Engelschall]
1530 *) First cut for a very conservative source tree cleanup:
1531 1. merge various obsolete readme texts into doc/ssleay.txt
1532 where we collect the old documents and readme texts.
1533 2. remove the first part of files where I'm already sure that we no
1534 longer need them because of three reasons: either they are just temporary
1535 files which were left by Eric or they are preserved original files where
1536 I've verified that the diff is also available in the CVS via "cvs diff
1537 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
1538 the crypto/md/ stuff).
1539 [Ralf S. Engelschall]
1541 *) More extension code. Incomplete support for subject and issuer alt
1542 name, issuer and authority key id. Change the i2v function parameters
1543 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
1544 what that's for :-) Fix to ASN1 macro which messed up
1545 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
1548 *) Preliminary support for ENUMERATED type. This is largely copied from the
1552 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
1553 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1555 *) Make sure `make rehash' target really finds the `openssl' program.
1556 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
1558 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
1559 like to hear about it if this slows down other processors.
1562 *) Add CygWin32 platform information to Configure script.
1563 [Alan Batie <batie@aahz.jf.intel.com>]
1565 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
1566 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
1568 *) New program nseq to manipulate netscape certificate sequences
1571 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
1575 *) Fixes to BN code. Previously the default was to define BN_RECURSION
1576 but the BN code had some problems that would cause failures when
1577 doing certificate verification and some other functions.
1578 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
1580 *) Add ASN1 and PEM code to support netscape certificate sequences.
1583 *) Add ASN1 and PEM code to support netscape certificate sequences.
1586 *) Add several PKIX and private extended key usage OIDs.
1589 *) Modify the 'ca' program to handle the new extension code. Modify
1590 openssl.cnf for new extension format, add comments.
1593 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
1594 and add a sample to openssl.cnf so req -x509 now adds appropriate
1598 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
1599 error code, add initial support to X509_print() and x509 application.
1602 *) Takes a deep breath and start addding X509 V3 extension support code. Add
1603 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
1604 stuff is currently isolated and isn't even compiled yet.
1607 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
1608 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
1609 Removed the versions check from X509 routines when loading extensions:
1610 this allows certain broken certificates that don't set the version
1611 properly to be processed.
1614 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
1615 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
1616 can still be regenerated with "make depend".
1619 *) Spelling mistake in C version of CAST-128.
1620 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
1622 *) Changes to the error generation code. The perl script err-code.pl
1623 now reads in the old error codes and retains the old numbers, only
1624 adding new ones if necessary. It also only changes the .err files if new
1625 codes are added. The makefiles have been modified to only insert errors
1626 when needed (to avoid needlessly modifying header files). This is done
1627 by only inserting errors if the .err file is newer than the auto generated
1628 C file. To rebuild all the error codes from scratch (the old behaviour)
1629 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
1630 or delete all the .err files.
1633 *) CAST-128 was incorrectly implemented for short keys. The C version has
1634 been fixed, but is untested. The assembler versions are also fixed, but
1635 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
1636 to regenerate it if needed.
1637 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
1638 Hagino <itojun@kame.net>]
1640 *) File was opened incorrectly in randfile.c.
1641 [Ulf Möller <ulf@fitug.de>]
1643 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
1644 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
1645 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
1646 al: it's just almost always a UTCTime. Note this patch adds new error
1647 codes so do a "make errors" if there are problems.
1650 *) Correct Linux 1 recognition in config.
1651 [Ulf Möller <ulf@fitug.de>]
1653 *) Remove pointless MD5 hash when using DSA keys in ca.
1654 [Anonymous <nobody@replay.com>]
1656 *) Generate an error if given an empty string as a cert directory. Also
1657 generate an error if handed NULL (previously returned 0 to indicate an
1658 error, but didn't set one).
1659 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
1661 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
1664 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
1665 parameters. This was causing a warning which killed off the Win32 compile.
1668 *) Remove C++ style comments from crypto/bn/bn_local.h.
1669 [Neil Costigan <neil.costigan@celocom.com>]
1671 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
1672 based on a text string, looking up short and long names and finally
1673 "dot" format. The "dot" format stuff didn't work. Added new function
1674 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
1675 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
1676 OID is not part of the table.
1679 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
1680 X509_LOOKUP_by_alias().
1683 *) Sort openssl functions by name.
1686 *) Get the gendsa program working (hopefully) and add it to app list. Remove
1687 encryption from sample DSA keys (in case anyone is interested the password
1691 *) Make _all_ *_free functions accept a NULL pointer.
1692 [Frans Heymans <fheymans@isaserver.be>]
1694 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
1696 [Anonymous <nobody@replay.com>]
1698 *) s_server should send the CAfile as acceptable CAs, not its own cert.
1699 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1701 *) Don't blow it for numeric -newkey arguments to apps/req.
1702 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
1704 *) Temp key "for export" tests were wrong in s3_srvr.c.
1705 [Anonymous <nobody@replay.com>]
1707 *) Add prototype for temp key callback functions
1708 SSL_CTX_set_tmp_{rsa,dh}_callback().
1711 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
1712 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
1715 *) X509_name_add_entry() freed the wrong thing after an error.
1716 [Arne Ansper <arne@ats.cyber.ee>]
1718 *) rsa_eay.c would attempt to free a NULL context.
1719 [Arne Ansper <arne@ats.cyber.ee>]
1721 *) BIO_s_socket() had a broken should_retry() on Windoze.
1722 [Arne Ansper <arne@ats.cyber.ee>]
1724 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
1725 [Arne Ansper <arne@ats.cyber.ee>]
1727 *) Make sure the already existing X509_STORE->depth variable is initialized
1728 in X509_STORE_new(), but document the fact that this variable is still
1729 unused in the certificate verification process.
1730 [Ralf S. Engelschall]
1732 *) Fix the various library and apps files to free up pkeys obtained from
1733 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
1736 *) Fix reference counting in X509_PUBKEY_get(). This makes
1737 demos/maurice/example2.c work, amongst others, probably.
1738 [Steve Henson and Ben Laurie]
1740 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
1741 `openssl' and second, the shortcut symlinks for the `openssl <command>'
1742 are no longer created. This way we have a single and consistent command
1743 line interface `openssl <command>', similar to `cvs <command>'.
1744 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
1746 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
1747 BIT STRING wrapper always have zero unused bits.
1750 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
1753 *) Make the top-level INSTALL documentation easier to understand.
1756 *) Makefiles updated to exit if an error occurs in a sub-directory
1757 make (including if user presses ^C) [Paul Sutton]
1759 *) Make Montgomery context stuff explicit in RSA data structure.
1762 *) Fix build order of pem and err to allow for generated pem.h.
1765 *) Fix renumbering bug in X509_NAME_delete_entry().
1768 *) Enhanced the err-ins.pl script so it makes the error library number
1769 global and can add a library name. This is needed for external ASN1 and
1770 other error libraries.
1773 *) Fixed sk_insert which never worked properly.
1776 *) Fix ASN1 macros so they can handle indefinite length construted
1777 EXPLICIT tags. Some non standard certificates use these: they can now
1781 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
1782 into a single doc/ssleay.txt bundle. This way the information is still
1783 preserved but no longer messes up this directory. Now it's new room for
1784 the new set of documenation files.
1785 [Ralf S. Engelschall]
1787 *) SETs were incorrectly DER encoded. This was a major pain, because they
1788 shared code with SEQUENCEs, which aren't coded the same. This means that
1789 almost everything to do with SETs or SEQUENCEs has either changed name or
1790 number of arguments.
1791 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
1793 *) Fix test data to work with the above.
1796 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
1797 was already fixed by Eric for 0.9.1 it seems.
1798 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
1800 *) Autodetect FreeBSD3.
1803 *) Fix various bugs in Configure. This affects the following platforms:
1807 unixware-2.0-pentium
1811 *) Eliminate generated files from CVS. Reorder tests to regenerate files
1812 before they are needed.
1815 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
1819 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
1821 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
1822 changed SSLeay to OpenSSL in version strings.
1823 [Ralf S. Engelschall]
1825 *) Some fixups to the top-level documents.
1828 *) Fixed the nasty bug where rsaref.h was not found under compile-time
1829 because the symlink to include/ was missing.
1830 [Ralf S. Engelschall]
1832 *) Incorporated the popular no-RSA/DSA-only patches
1833 which allow to compile a RSA-free SSLeay.
1834 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
1836 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
1837 when "ssleay" is still not found.
1838 [Ralf S. Engelschall]
1840 *) Added more platforms to Configure: Cray T3E, HPUX 11,
1841 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
1843 *) Updated the README file.
1844 [Ralf S. Engelschall]
1846 *) Added various .cvsignore files in the CVS repository subdirs
1847 to make a "cvs update" really silent.
1848 [Ralf S. Engelschall]
1850 *) Recompiled the error-definition header files and added
1851 missing symbols to the Win32 linker tables.
1852 [Ralf S. Engelschall]
1854 *) Cleaned up the top-level documents;
1855 o new files: CHANGES and LICENSE
1856 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
1857 o merged COPYRIGHT into LICENSE
1858 o removed obsolete TODO file
1859 o renamed MICROSOFT to INSTALL.W32
1860 [Ralf S. Engelschall]
1862 *) Removed dummy files from the 0.9.1b source tree:
1863 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
1864 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
1865 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
1866 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
1867 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
1868 [Ralf S. Engelschall]
1870 *) Added various platform portability fixes.
1873 *) The Genesis of the OpenSSL rpject:
1874 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
1875 Young and Tim J. Hudson created while they were working for C2Net until
1877 [The OpenSSL Project]
1880 Changes between 0.9.0b and 0.9.1b [not released]
1882 *) Updated a few CA certificates under certs/
1885 *) Changed some BIGNUM api stuff.
1888 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
1889 DGUX x86, Linux Alpha, etc.
1892 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
1893 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
1897 *) Add -strparse option to asn1pars program which parses nested
1899 [Dr Stephen Henson <shenson@bigfoot.com>]
1901 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
1904 *) DSA fix for "ca" program.
1907 *) Added "-genkey" option to "dsaparam" program.
1910 *) Added RIPE MD160 (rmd160) message digest.
1913 *) Added -a (all) option to "ssleay version" command.
1916 *) Added PLATFORM define which is the id given to Configure.
1919 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
1922 *) Extended the ASN.1 parser routines.
1925 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
1928 *) Added a BN_CTX to the BN library.
1931 *) Fixed the weak key values in DES library
1934 *) Changed API in EVP library for cipher aliases.
1937 *) Added support for RC2/64bit cipher.
1940 *) Converted the lhash library to the crypto/mem.c functions.
1943 *) Added more recognized ASN.1 object ids.
1946 *) Added more RSA padding checks for SSL/TLS.
1949 *) Added BIO proxy/filter functionality.
1952 *) Added extra_certs to SSL_CTX which can be used
1953 send extra CA certificates to the client in the CA cert chain sending
1954 process. It can be configured with SSL_CTX_add_extra_chain_cert().
1957 *) Now Fortezza is denied in the authentication phase because
1958 this is key exchange mechanism is not supported by SSLeay at all.
1961 *) Additional PKCS1 checks.
1964 *) Support the string "TLSv1" for all TLS v1 ciphers.
1967 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
1968 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
1971 *) Fixed a few memory leaks.
1974 *) Fixed various code and comment typos.
1977 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
1978 bytes sent in the client random.
1979 [Edward Bishop <ebishop@spyglass.com>]