5 Changes between 0.9.7c and 0.9.8 [xx XXX xxxx]
7 *) Because of the callback-based approach for implementing LHASH as a
8 template type, lh_insert() adds opaque objects to hash-tables and
9 lh_doall() or lh_doall_arg() are typically used with a destructor callback
10 to clean up those corresponding objects before destroying the hash table
11 (and losing the object pointers). So some over-zealous constifications in
12 LHASH have been relaxed so that lh_insert() does not take (nor store) the
13 objects as "const" and the lh_doall[_arg] callback wrappers are not
14 prototyped to have "const" restrictions on the object pointers they are
15 given (and so aren't required to cast them away any more).
18 *) The tmdiff.h API was so ugly and minimal that our own timing utility
19 (speed) prefers to use its own implementation. The two implementations
20 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
21 its object type properly exposed (MS_TM) instead of casting to/from "char
22 *". This may still change yet if someone realises MS_TM and "ms_time_***"
23 aren't necessarily the greatest nomenclatures - but this is what was used
24 internally to the implementation so I've used that for now.
27 *) Ensure that deprecated functions do not get compiled when
28 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
29 the self-tests were still using deprecated key-generation functions so
30 these have been updated also.
33 *) Reorganise PKCS#7 code to separate the digest location functionality
34 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
35 New function PKCS7_set_digest() to set the digest type for PKCS#7
36 digestedData type. Add additional code to correctly generate the
37 digestedData type and add support for this type in PKCS7 initialization
41 *) New function PKCS7_set0_type_other() this initializes a PKCS7
42 structure of type "other".
45 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
46 sure the loop does correctly stop and breaking ("division by zero")
47 modulus operations are not performed. The (pre-generated) prime
48 table crypto/bn/bn_prime.h was already correct, but it could not be
49 re-generated on some platforms because of the "division by zero"
50 situation in the script.
53 *) Update support for ECC-based TLS ciphersuites according to
54 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
55 SHA-1 now is only used for "small" curves (where the
56 representation of a field element takes up to 24 bytes); for
57 larger curves, the field element resulting from ECDH is directly
58 used as premaster secret.
59 [Douglas Stebila (Sun Microsystems Laboratories)]
61 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
62 curve secp160r1 to the tests.
63 [Douglas Stebila (Sun Microsystems Laboratories)]
65 *) Add the possibility to load symbols globally with DSO.
66 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
68 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
69 control of the error stack.
72 *) Add support for STORE in ENGINE.
75 *) Add the STORE type. The intention is to provide a common interface
76 to certificate and key stores, be they simple file-based stores, or
77 HSM-type store, or LDAP stores, or...
78 NOTE: The code is currently UNTESTED and isn't really used anywhere.
81 *) Add a generic structure called OPENSSL_ITEM. This can be used to
82 pass a list of arguments to any function as well as provide a way
83 for a function to pass data back to the caller.
86 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
87 works like BUF_strdup() but can be used to duplicate a portion of
88 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
92 *) Add the function sk_find_ex() which works like sk_find(), but will
93 return an index to an element even if an exact match couldn't be
94 found. The index is guaranteed to point at the element where the
95 searched-for key would be inserted to preserve sorting order.
98 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
99 takes an extra flags argument for optional functionality. Currently,
100 the following flags are defined:
102 OBJ_BSEARCH_VALUE_ON_NOMATCH
103 This one gets OBJ_bsearch_ex() to return a pointer to the first
104 element where the comparing function returns a negative or zero
107 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
108 This one gets OBJ_bsearch_ex() to return a pointer to the first
109 element where the comparing function returns zero. This is useful
110 if there are more than one element where the comparing function
114 *) Make it possible to create self-signed certificates with 'openssl ca'
115 in such a way that the self-signed certificate becomes part of the
116 CA database and uses the same mechanisms for serial number generation
117 as all other certificate signing. The new flag '-selfsign' enables
118 this functionality. Adapt CA.sh and CA.pl.in.
121 *) Add functionality to check the public key of a certificate request
122 against a given private. This is useful to check that a certificate
123 request can be signed by that key (self-signing).
126 *) Make it possible to have multiple active certificates with the same
127 subject in the CA index file. This is done only if the keyword
128 'unique_subject' is set to 'no' in the main CA section (default
129 if 'CA_default') of the configuration file. The value is saved
130 with the database itself in a separate index attribute file,
131 named like the index file with '.attr' appended to the name.
134 *) Generate muti valued AVAs using '+' notation in config files for
138 *) Support for nameConstraints certificate extension.
141 *) Support for policyConstraints certificate extension.
144 *) Support for policyMappings certificate extension.
147 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
148 ENGINE as defaults for all supported algorithms irrespective of
149 the 'flags' parameter. 'flags' is now honoured, so applications
150 should make sure they are passing it correctly.
153 *) Make sure the default DSA_METHOD implementation only uses its
154 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
155 and change its own handlers to be NULL so as to remove unnecessary
156 indirection. This lets alternative implementations fallback to the
157 default implementation more easily.
160 *) Support for directoryName in GeneralName related extensions
164 *) Make it possible to link applications using Makefile.shared.
165 Make that possible even when linking against static libraries!
168 *) Support for single pass processing for S/MIME signing. This now
169 means that S/MIME signing can be done from a pipe, in addition
170 cleartext signing (multipart/signed type) is effectively streaming
171 and the signed data does not need to be all held in memory.
173 This is done with a new flag PKCS7_STREAM. When this flag is set
174 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
175 is done after the data is output (and digests calculated) in
179 *) Add full support for -rpath/-R, both in shared libraries and
180 applications, at least on the platforms where it's known how
184 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
185 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
186 will now compute a table of multiples of the generator that
187 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
188 faster (notably in the case of a single point multiplication,
190 [Nils Larsch, Bodo Moeller]
192 *) IPv6 support for certificate extensions. The various extensions
193 which use the IP:a.b.c.d can now take IPv6 addresses using the
194 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
198 *) Added an ENGINE that implements RSA by performing private key
199 exponentiations with the GMP library. The conversions to and from
200 GMP's mpz_t format aren't optimised nor are any montgomery forms
201 cached, and on x86 it appears OpenSSL's own performance has caught up.
202 However there are likely to be other architectures where GMP could
203 provide a boost. This ENGINE is not built in by default, but it can be
204 specified at Configure time and should be accompanied by the necessary
205 linker additions, eg;
206 ./config -DOPENSSL_USE_GMP -lgmp
209 *) "openssl engine" will not display ENGINE/DSO load failure errors when
210 testing availability of engines with "-t" - the old behaviour is
211 produced by increasing the feature's verbosity with "-tt".
214 *) ECDSA routines: under certain error conditions uninitialized BN objects
215 could be freed. Solution: make sure initialization is performed early
216 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
220 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
221 and DH_METHOD (eg. by ENGINE implementations) to override the normal
222 software implementations. For DSA and DH, parameter generation can
223 also be overriden by providing the appropriate method callbacks.
226 *) Change the "progress" mechanism used in key-generation and
227 primality testing to functions that take a new BN_GENCB pointer in
228 place of callback/argument pairs. The new API functions have "_ex"
229 postfixes and the older functions are reimplemented as wrappers for
230 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
231 declarations of the old functions to help (graceful) attempts to
232 migrate to the new functions. Also, the new key-generation API
233 functions operate on a caller-supplied key-structure and return
234 success/failure rather than returning a key or NULL - this is to
235 help make "keygen" another member function of RSA_METHOD etc.
237 Example for using the new callback interface:
239 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
243 BN_GENCB_set(&my_cb, my_callback, my_arg);
245 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
246 /* For the meaning of a, b in calls to my_callback(), see the
247 * documentation of the function that calls the callback.
248 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
249 * my_callback should return 1 if it wants BN_is_prime_ex()
250 * to continue, or 0 to stop.
255 *) Change the ZLIB compression method to be stateful, and make it
256 available to TLS with the number defined in
257 draft-ietf-tls-compression-04.txt.
260 *) Add the ASN.1 structures and functions for CertificatePair, which
261 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
263 CertificatePair ::= SEQUENCE {
264 forward [0] Certificate OPTIONAL,
265 reverse [1] Certificate OPTIONAL,
266 -- at least one of the pair shall be present -- }
268 Also implement the PEM functions to read and write certificate
269 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
271 This needed to be defined, mostly for the sake of the LDAP
272 attribute crossCertificatePair, but may prove useful elsewhere as
276 *) Make it possible to inhibit symlinking of shared libraries in
277 Makefile.shared, for Cygwin's sake.
280 *) Extend the BIGNUM API by creating new macros that behave like
283 void BN_set_sign(BIGNUM *a, int neg);
284 int BN_get_sign(const BIGNUM *a);
286 and avoid the need to access 'a->neg' directly in applications.
287 [Nils Larsch <nla@trustcenter.de>]
289 *) Implement fast modular reduction for pseudo-Mersenne primes
290 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
291 EC_GROUP_new_curve_GFp() will now automatically use this
293 [Nils Larsch <nla@trustcenter.de>]
295 *) Add new lock type (CRYPTO_LOCK_BN).
298 *) Change the ENGINE framework to automatically load engines
299 dynamically from specific directories unless they could be
300 found to already be built in or loaded. Move all the
301 current engines except for the cryptodev one to a new
303 The engines in engines/ are built as shared libraries if
304 the "shared" options was given to ./Configure or ./config.
305 Otherwise, they are inserted in libcrypto.a.
306 /usr/local/ssl/engines is the default directory for dynamic
307 engines, but that can be overriden at configure time through
308 the usual use of --prefix and/or --openssldir, and at run
309 time with the environment variable OPENSSL_ENGINES.
310 [Geoff Thorpe and Richard Levitte]
312 *) Add Makefile.shared, a helper makefile to build shared
313 libraries. Addapt Makefile.org.
316 *) Add version info to Win32 DLLs.
317 [Peter 'Luna' Runestig" <peter@runestig.com>]
319 *) Add new 'medium level' PKCS#12 API. Certificates and keys
320 can be added using this API to created arbitrary PKCS#12
321 files while avoiding the low level API.
323 New options to PKCS12_create(), key or cert can be NULL and
324 will then be omitted from the output file. The encryption
325 algorithm NIDs can be set to -1 for no encryption, the mac
326 iteration count can be set to 0 to omit the mac.
328 Enhance pkcs12 utility by making the -nokeys and -nocerts
329 options work when creating a PKCS#12 file. New option -nomac
330 to omit the mac, NONE can be set for an encryption algorithm.
331 New code is modified to use the enhanced PKCS12_create()
332 instead of the low level API.
335 *) Extend ASN1 encoder to support indefinite length constructed
336 encoding. This can output sequences tags and octet strings in
337 this form. Modify pk7_asn1.c to support indefinite length
338 encoding. This is experimental and needs additional code to
339 be useful, such as an ASN1 bio and some enhanced streaming
342 Extend template encode functionality so that tagging is passed
343 down to the template encoder.
346 *) Let 'openssl req' fail if an argument to '-newkey' is not
347 recognized instead of using RSA as a default.
350 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
351 As these are not official, they are not included in "ALL";
352 the "ECCdraft" ciphersuite group alias can be used to select them.
353 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
355 *) Add ECDH engine support.
356 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
358 *) Add ECDH in new directory crypto/ecdh/.
359 [Douglas Stebila (Sun Microsystems Laboratories)]
361 *) Let BN_rand_range() abort with an error after 100 iterations
362 without success (which indicates a broken PRNG).
365 *) Change BN_mod_sqrt() so that it verifies that the input value
366 is really the square of the return value. (Previously,
367 BN_mod_sqrt would show GIGO behaviour.)
370 *) Add named elliptic curves over binary fields from X9.62, SECG,
371 and WAP/WTLS; add OIDs that were still missing.
373 [Sheueling Chang Shantz and Douglas Stebila
374 (Sun Microsystems Laboratories)]
376 *) Extend the EC library for elliptic curves over binary fields
377 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
380 EC_GF2m_simple_method
384 EC_GROUP_new_curve_GF2m
385 EC_GROUP_set_curve_GF2m
386 EC_GROUP_get_curve_GF2m
387 EC_POINT_set_affine_coordinates_GF2m
388 EC_POINT_get_affine_coordinates_GF2m
389 EC_POINT_set_compressed_coordinates_GF2m
391 Point compression for binary fields is disabled by default for
392 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
395 As binary polynomials are represented as BIGNUMs, various members
396 of the EC_GROUP and EC_POINT data structures can be shared
397 between the implementations for prime fields and binary fields;
398 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
399 are essentially identical to their ..._GFp counterparts.
400 (For simplicity, the '..._GFp' prefix has been dropped from
401 various internal method names.)
403 An internal 'field_div' method (similar to 'field_mul' and
404 'field_sqr') has been added; this is used only for binary fields.
406 [Sheueling Chang Shantz and Douglas Stebila
407 (Sun Microsystems Laboratories)]
409 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
410 through methods ('mul', 'precompute_mult').
412 The generic implementations (now internally called 'ec_wNAF_mul'
413 and 'ec_wNAF_precomputed_mult') remain the default if these
414 methods are undefined.
416 [Sheueling Chang Shantz and Douglas Stebila
417 (Sun Microsystems Laboratories)]
419 *) New function EC_GROUP_get_degree, which is defined through
420 EC_METHOD. For curves over prime fields, this returns the bit
421 length of the modulus.
423 [Sheueling Chang Shantz and Douglas Stebila
424 (Sun Microsystems Laboratories)]
426 *) New functions EC_GROUP_dup, EC_POINT_dup.
427 (These simply call ..._new and ..._copy).
429 [Sheueling Chang Shantz and Douglas Stebila
430 (Sun Microsystems Laboratories)]
432 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
433 Polynomials are represented as BIGNUMs (where the sign bit is not
434 used) in the following functions [macros]:
437 BN_GF2m_sub [= BN_GF2m_add]
438 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
439 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
440 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
442 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
443 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
444 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
445 BN_GF2m_cmp [= BN_ucmp]
447 (Note that only the 'mod' functions are actually for fields GF(2^m).
448 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
450 For some functions, an the irreducible polynomial defining a
451 field can be given as an 'unsigned int[]' with strictly
452 decreasing elements giving the indices of those bits that are set;
453 i.e., p[] represents the polynomial
454 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
456 p[0] > p[1] > ... > p[k] = 0.
457 This applies to the following functions:
462 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
463 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
466 BN_GF2m_mod_solve_quad_arr
470 Conversion can be performed by the following functions:
475 bntest.c has additional tests for binary polynomial arithmetic.
477 Two implementations for BN_GF2m_mod_div() are available.
478 The default algorithm simply uses BN_GF2m_mod_inv() and
479 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
480 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
481 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
483 [Sheueling Chang Shantz and Douglas Stebila
484 (Sun Microsystems Laboratories)]
486 *) Add new error code 'ERR_R_DISABLED' that can be used when some
487 functionality is disabled at compile-time.
488 [Douglas Stebila <douglas.stebila@sun.com>]
490 *) Change default behaviour of 'openssl asn1parse' so that more
491 information is visible when viewing, e.g., a certificate:
493 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
494 mode the content of non-printable OCTET STRINGs is output in a
495 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
496 avoid the appearance of a printable string.
497 [Nils Larsch <nla@trustcenter.de>]
499 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
501 EC_GROUP_set_asn1_flag()
502 EC_GROUP_get_asn1_flag()
503 EC_GROUP_set_point_conversion_form()
504 EC_GROUP_get_point_conversion_form()
505 These control ASN1 encoding details:
506 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
507 has been set to OPENSSL_EC_NAMED_CURVE.
508 - Points are encoded in uncompressed form by default; options for
509 asn1_for are as for point2oct, namely
510 POINT_CONVERSION_COMPRESSED
511 POINT_CONVERSION_UNCOMPRESSED
512 POINT_CONVERSION_HYBRID
514 Also add 'seed' and 'seed_len' members to EC_GROUP with access
518 EC_GROUP_get_seed_len()
519 This is used only for ASN1 purposes (so far).
520 [Nils Larsch <nla@trustcenter.de>]
522 *) Add 'field_type' member to EC_METHOD, which holds the NID
523 of the appropriate field type OID. The new function
524 EC_METHOD_get_field_type() returns this value.
525 [Nils Larsch <nla@trustcenter.de>]
532 providing useful interfaces to EC_POINT_point2oct() and
533 EC_POINT_oct2point().
534 [Nils Larsch <nla@trustcenter.de>]
536 *) Change internals of the EC library so that the functions
537 EC_GROUP_set_generator()
538 EC_GROUP_get_generator()
540 EC_GROUP_get_cofactor()
541 are implemented directly in crypto/ec/ec_lib.c and not dispatched
542 to methods, which would lead to unnecessary code duplication when
543 adding different types of curves.
544 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
546 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
547 arithmetic, and such that modified wNAFs are generated
548 (which avoid length expansion in many cases).
551 *) Add a function EC_GROUP_check_discriminant() (defined via
552 EC_METHOD) that verifies that the curve discriminant is non-zero.
554 Add a function EC_GROUP_check() that makes some sanity tests
555 on a EC_GROUP, its generator and order. This includes
556 EC_GROUP_check_discriminant().
557 [Nils Larsch <nla@trustcenter.de>]
559 *) Add ECDSA in new directory crypto/ecdsa/.
561 Add applications 'openssl ecparam' and 'openssl ecdsa'
562 (these are based on 'openssl dsaparam' and 'openssl dsa').
564 ECDSA support is also included in various other files across the
565 library. Most notably,
566 - 'openssl req' now has a '-newkey ecdsa:file' option;
567 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
568 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
569 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
570 them suitable for ECDSA where domain parameters must be
571 extracted before the specific public key;
572 - ECDSA engine support has been added.
573 [Nils Larsch <nla@trustcenter.de>]
575 *) Include some named elliptic curves, and add OIDs from X9.62,
576 SECG, and WAP/WTLS. Each curve can be obtained from the new
578 EC_GROUP_new_by_nid(),
579 and the list of available named curves can be obtained with
580 EC_get_builtin_curves().
581 Also add a 'curve_name' member to EC_GROUP objects, which can be
585 [Nils Larsch <nla@trustcenter.de, Bodo Moeller]
587 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
588 was actually never needed) and in BN_mul(). The removal in BN_mul()
589 required a small change in bn_mul_part_recursive() and the addition
590 of the functions bn_cmp_part_words(), bn_sub_part_words() and
591 bn_add_part_words(), which do the same thing as bn_cmp_words(),
592 bn_sub_words() and bn_add_words() except they take arrays with
596 Changes between 0.9.7c and 0.9.7d [xx XXX XXXX]
597 *) Use the correct content when signing type "other".
600 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
602 *) Fix various bugs revealed by running the NISCC test suite:
604 Stop out of bounds reads in the ASN1 code when presented with
605 invalid tags (CAN-2003-0543 and CAN-2003-0544).
607 Free up ASN1_TYPE correctly if ANY type is invalid (CAN-2003-0545).
609 If verify callback ignores invalid public key errors don't try to check
610 certificate signature with the NULL public key.
614 *) New -ignore_err option in ocsp application to stop the server
615 exiting on the first error in a request.
618 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
619 if the server requested one: as stated in TLS 1.0 and SSL 3.0
623 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
624 extra data after the compression methods not only for TLS 1.0
625 but also for SSL 3.0 (as required by the specification).
626 [Bodo Moeller; problem pointed out by Matthias Loepfe]
628 *) Change X509_certificate_type() to mark the key as exported/exportable
629 when it's 512 *bits* long, not 512 bytes.
632 *) Change AES_cbc_encrypt() so it outputs exact multiple of
633 blocks during encryption.
636 *) Various fixes to base64 BIO and non blocking I/O. On write
637 flushes were not handled properly if the BIO retried. On read
638 data was not being buffered properly and had various logic bugs.
639 This also affects blocking I/O when the data being decoded is a
643 *) Various S/MIME bugfixes and compatibility changes:
644 output correct application/pkcs7 MIME type if
645 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
646 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
647 of files as .eml work). Correctly handle very long lines in MIME
651 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
653 *) Countermeasure against the Klima-Pokorny-Rosa extension of
654 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
655 a protocol version number mismatch like a decryption error
656 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
659 *) Turn on RSA blinding by default in the default implementation
660 to avoid a timing attack. Applications that don't want it can call
661 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
662 They would be ill-advised to do so in most cases.
663 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
665 *) Change RSA blinding code so that it works when the PRNG is not
666 seeded (in this case, the secret RSA exponent is abused as
667 an unpredictable seed -- if it is not unpredictable, there
668 is no point in blinding anyway). Make RSA blinding thread-safe
669 by remembering the creator's thread ID in rsa->blinding and
670 having all other threads use local one-time blinding factors
671 (this requires more computation than sharing rsa->blinding, but
672 avoids excessive locking; and if an RSA object is not shared
673 between threads, blinding will still be very fast).
676 yet to be integrated into this CVS branch:
677 - Geoff's ENGINE_set_default() fix
679 *) Target "mingw" now allows native Windows code to be generated in
680 the Cygwin environment as well as with the MinGW compiler.
683 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
685 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
686 via timing by performing a MAC computation even if incorrrect
687 block cipher padding has been found. This is a countermeasure
688 against active attacks where the attacker has to distinguish
689 between bad padding and a MAC verification error. (CAN-2003-0078)
691 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
692 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
693 Martin Vuagnoux (EPFL, Ilion)]
695 *) Make the no-err option work as intended. The intention with no-err
696 is not to have the whole error stack handling routines removed from
697 libcrypto, it's only intended to remove all the function name and
698 reason texts, thereby removing some of the footprint that may not
699 be interesting if those errors aren't displayed anyway.
701 NOTE: it's still possible for any application or module to have it's
702 own set of error texts inserted. The routines are there, just not
703 used by default when no-err is given.
706 *) Add support for FreeBSD on IA64.
707 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
709 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
710 Kerberos function mit_des_cbc_cksum(). Before this change,
711 the value returned by DES_cbc_cksum() was like the one from
712 mit_des_cbc_cksum(), except the bytes were swapped.
713 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
715 *) Allow an application to disable the automatic SSL chain building.
716 Before this a rather primitive chain build was always performed in
717 ssl3_output_cert_chain(): an application had no way to send the
718 correct chain if the automatic operation produced an incorrect result.
720 Now the chain builder is disabled if either:
722 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
724 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
726 The reasoning behind this is that an application would not want the
727 auto chain building to take place if extra chain certificates are
728 present and it might also want a means of sending no additional
729 certificates (for example the chain has two certificates and the
733 *) Add the possibility to build without the ENGINE framework.
734 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
736 *) Under Win32 gmtime() can return NULL: check return value in
737 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
740 *) DSA routines: under certain error conditions uninitialized BN objects
741 could be freed. Solution: make sure initialization is performed early
742 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
743 Nils Larsch <nla@trustcenter.de> via PR#459)
746 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
747 checked on reconnect on the client side, therefore session resumption
748 could still fail with a "ssl session id is different" error. This
749 behaviour is masked when SSL_OP_ALL is used due to
750 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
751 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
755 *) IA-32 assembler support enhancements: unified ELF targets, support
756 for SCO/Caldera platforms, fix for Cygwin shared build.
759 *) Add support for FreeBSD on sparc64. As a consequence, support for
760 FreeBSD on non-x86 processors is separate from x86 processors on
761 the config script, much like the NetBSD support.
762 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
764 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
766 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
769 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
770 code (06) was taken as the first octet of the session ID and the last
771 octet was ignored consequently. As a result SSLv2 client side session
772 caching could not have worked due to the session ID mismatch between
774 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
778 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
779 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
783 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
784 seems that in spite of existing for more than a year, many application
785 author have done nothing to provide the necessary callbacks, which
786 means that this particular engine will not work properly anywhere.
787 This is a very unfortunate situation which forces us, in the name
788 of usability, to give the hw_ncipher.c a static lock, which is part
790 NOTE: This is for the 0.9.7 series ONLY. This hack will never
791 appear in 0.9.8 or later. We EXPECT application authors to have
792 dealt properly with this when 0.9.8 is released (unless we actually
793 make such changes in the libcrypto locking code that changes will
794 have to be made anyway).
797 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
798 octets have been read, EOF or an error occurs. Without this change
799 some truncated ASN1 structures will not produce an error.
802 *) Disable Heimdal support, since it hasn't been fully implemented.
803 Still give the possibility to force the use of Heimdal, but with
804 warnings and a request that patches get sent to openssl-dev.
807 *) Add the VC-CE target, introduce the WINCE sysname, and add
808 INSTALL.WCE and appropriate conditionals to make it build.
809 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
811 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
812 cygssl-x.y.z.dll, where x, y and z are the major, minor and
813 edit numbers of the version.
814 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
816 *) Introduce safe string copy and catenation functions
817 (BUF_strlcpy() and BUF_strlcat()).
818 [Ben Laurie (CHATS) and Richard Levitte]
820 *) Avoid using fixed-size buffers for one-line DNs.
823 *) Add BUF_MEM_grow_clean() to avoid information leakage when
824 resizing buffers containing secrets, and use where appropriate.
827 *) Avoid using fixed size buffers for configuration file location.
830 *) Avoid filename truncation for various CA files.
833 *) Use sizeof in preference to magic numbers.
836 *) Avoid filename truncation in cert requests.
839 *) Add assertions to check for (supposedly impossible) buffer
843 *) Don't cache truncated DNS entries in the local cache (this could
844 potentially lead to a spoofing attack).
847 *) Fix various buffers to be large enough for hex/decimal
848 representations in a platform independent manner.
851 *) Add CRYPTO_realloc_clean() to avoid information leakage when
852 resizing buffers containing secrets, and use where appropriate.
855 *) Add BIO_indent() to avoid much slightly worrying code to do
859 *) Convert sprintf()/BIO_puts() to BIO_printf().
862 *) buffer_gets() could terminate with the buffer only half
866 *) Add assertions to prevent user-supplied crypto functions from
867 overflowing internal buffers by having large block sizes, etc.
870 *) New OPENSSL_assert() macro (similar to assert(), but enabled
874 *) Eliminate unused copy of key in RC4.
877 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
880 *) Fix off-by-one error in EGD path.
883 *) If RANDFILE path is too long, ignore instead of truncating.
886 *) Eliminate unused and incorrectly sized X.509 structure
890 *) Eliminate unused and dangerous function knumber().
893 *) Eliminate unused and dangerous structure, KSSL_ERR.
896 *) Protect against overlong session ID context length in an encoded
897 session object. Since these are local, this does not appear to be
901 *) Change from security patch (see 0.9.6e below) that did not affect
902 the 0.9.6 release series:
904 Remote buffer overflow in SSL3 protocol - an attacker could
905 supply an oversized master key in Kerberos-enabled versions.
909 *) Change the SSL kerb5 codes to match RFC 2712.
912 *) Make -nameopt work fully for req and add -reqopt switch.
913 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
915 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
916 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
918 *) Make sure tests can be performed even if the corresponding algorithms
919 have been removed entirely. This was also the last step to make
920 OpenSSL compilable with DJGPP under all reasonable conditions.
921 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
923 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
924 to allow version independent disabling of normally unselected ciphers,
925 which may be activated as a side-effect of selecting a single cipher.
927 (E.g., cipher list string "RSA" enables ciphersuites that are left
928 out of "ALL" because they do not provide symmetric encryption.
929 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
930 [Lutz Jaenicke, Bodo Moeller]
932 *) Add appropriate support for separate platform-dependent build
933 directories. The recommended way to make a platform-dependent
934 build directory is the following (tested on Linux), maybe with
937 # Place yourself outside of the OpenSSL source tree. In
938 # this example, the environment variable OPENSSL_SOURCE
939 # is assumed to contain the absolute OpenSSL source directory.
940 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
941 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
942 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
943 mkdir -p `dirname $F`
944 ln -s $OPENSSL_SOURCE/$F $F
947 To be absolutely sure not to disturb the source tree, a "make clean"
948 is a good thing. If it isn't successfull, don't worry about it,
949 it probably means the source directory is very clean.
952 *) Make sure any ENGINE control commands make local copies of string
953 pointers passed to them whenever necessary. Otherwise it is possible
954 the caller may have overwritten (or deallocated) the original string
955 data when a later ENGINE operation tries to use the stored values.
956 [Götz Babin-Ebell <babinebell@trustcenter.de>]
958 *) Improve diagnostics in file reading and command-line digests.
959 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
961 *) Add AES modes CFB and OFB to the object database. Correct an
962 error in AES-CFB decryption.
965 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
966 allows existing EVP_CIPHER_CTX structures to be reused after
967 calling EVP_*Final(). This behaviour is used by encryption
968 BIOs and some applications. This has the side effect that
969 applications must explicitly clean up cipher contexts with
970 EVP_CIPHER_CTX_cleanup() or they will leak memory.
973 *) Check the values of dna and dnb in bn_mul_recursive before calling
974 bn_mul_comba (a non zero value means the a or b arrays do not contain
975 n2 elements) and fallback to bn_mul_normal if either is not zero.
978 *) Fix escaping of non-ASCII characters when using the -subj option
979 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
982 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
983 form for "surname", serialNumber has no short form.
984 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
985 therefore remove "mail" short name for "internet 7".
986 The OID for unique identifiers in X509 certificates is
987 x500UniqueIdentifier, not uniqueIdentifier.
988 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
991 *) Add an "init" command to the ENGINE config module and auto initialize
992 ENGINEs. Without any "init" command the ENGINE will be initialized
993 after all ctrl commands have been executed on it. If init=1 the
994 ENGINE is initailized at that point (ctrls before that point are run
995 on the uninitialized ENGINE and after on the initialized one). If
996 init=0 then the ENGINE will not be iniatialized at all.
999 *) Fix the 'app_verify_callback' interface so that the user-defined
1000 argument is actually passed to the callback: In the
1001 SSL_CTX_set_cert_verify_callback() prototype, the callback
1002 declaration has been changed from
1005 int (*cb)(X509_STORE_CTX *,void *);
1006 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
1007 i=s->ctx->app_verify_callback(&ctx)
1008 has been changed into
1009 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
1011 To update applications using SSL_CTX_set_cert_verify_callback(),
1012 a dummy argument can be added to their callback functions.
1013 [D. K. Smetters <smetters@parc.xerox.com>]
1015 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
1016 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
1018 *) Add and OPENSSL_LOAD_CONF define which will cause
1019 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
1020 This allows older applications to transparently support certain
1021 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
1022 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
1023 load the config file and OPENSSL_add_all_algorithms_conf() which will
1024 always load it have also been added.
1027 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
1028 Adjust NIDs and EVP layer.
1029 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1031 *) Config modules support in openssl utility.
1033 Most commands now load modules from the config file,
1034 though in a few (such as version) this isn't done
1035 because it couldn't be used for anything.
1037 In the case of ca and req the config file used is
1038 the same as the utility itself: that is the -config
1039 command line option can be used to specify an
1043 *) Move default behaviour from OPENSSL_config(). If appname is NULL
1044 use "openssl_conf" if filename is NULL use default openssl config file.
1047 *) Add an argument to OPENSSL_config() to allow the use of an alternative
1048 config section name. Add a new flag to tolerate a missing config file
1049 and move code to CONF_modules_load_file().
1052 *) Support for crypto accelerator cards from Accelerated Encryption
1053 Processing, www.aep.ie. (Use engine 'aep')
1054 The support was copied from 0.9.6c [engine] and adapted/corrected
1055 to work with the new engine framework.
1056 [AEP Inc. and Richard Levitte]
1058 *) Support for SureWare crypto accelerator cards from Baltimore
1059 Technologies. (Use engine 'sureware')
1060 The support was copied from 0.9.6c [engine] and adapted
1061 to work with the new engine framework.
1064 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
1065 make the newer ENGINE framework commands for the CHIL engine work.
1066 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
1068 *) Make it possible to produce shared libraries on ReliantUNIX.
1069 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
1071 *) Add the configuration target debug-linux-ppro.
1072 Make 'openssl rsa' use the general key loading routines
1073 implemented in apps.c, and make those routines able to
1074 handle the key format FORMAT_NETSCAPE and the variant
1076 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1078 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
1079 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1081 *) Add -keyform to rsautl, and document -engine.
1082 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
1084 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
1085 BIO_R_NO_SUCH_FILE error code rather than the generic
1086 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
1089 *) Add new functions
1091 ERR_peek_last_error_line
1092 ERR_peek_last_error_line_data.
1093 These are similar to
1096 ERR_peek_error_line_data,
1097 but report on the latest error recorded rather than the first one
1098 still in the error queue.
1099 [Ben Laurie, Bodo Moeller]
1101 *) default_algorithms option in ENGINE config module. This allows things
1103 default_algorithms = ALL
1104 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
1107 *) Prelminary ENGINE config module.
1110 *) New experimental application configuration code.
1113 *) Change the AES code to follow the same name structure as all other
1114 symmetric ciphers, and behave the same way. Move everything to
1115 the directory crypto/aes, thereby obsoleting crypto/rijndael.
1116 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1118 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
1119 [Ben Laurie and Theo de Raadt]
1121 *) Add option to output public keys in req command.
1122 [Massimiliano Pala madwolf@openca.org]
1124 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
1125 (up to about 10% better than before for P-192 and P-224).
1128 *) New functions/macros
1130 SSL_CTX_set_msg_callback(ctx, cb)
1131 SSL_CTX_set_msg_callback_arg(ctx, arg)
1132 SSL_set_msg_callback(ssl, cb)
1133 SSL_set_msg_callback_arg(ssl, arg)
1135 to request calling a callback function
1137 void cb(int write_p, int version, int content_type,
1138 const void *buf, size_t len, SSL *ssl, void *arg)
1140 whenever a protocol message has been completely received
1141 (write_p == 0) or sent (write_p == 1). Here 'version' is the
1142 protocol version according to which the SSL library interprets
1143 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
1144 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
1145 the content type as defined in the SSL 3.0/TLS 1.0 protocol
1146 specification (change_cipher_spec(20), alert(21), handshake(22)).
1147 'buf' and 'len' point to the actual message, 'ssl' to the
1148 SSL object, and 'arg' is the application-defined value set by
1149 SSL[_CTX]_set_msg_callback_arg().
1151 'openssl s_client' and 'openssl s_server' have new '-msg' options
1152 to enable a callback that displays all protocol messages.
1155 *) Change the shared library support so shared libraries are built as
1156 soon as the corresponding static library is finished, and thereby get
1157 openssl and the test programs linked against the shared library.
1158 This still only happens when the keyword "shard" has been given to
1159 the configuration scripts.
1161 NOTE: shared library support is still an experimental thing, and
1162 backward binary compatibility is still not guaranteed.
1163 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
1165 *) Add support for Subject Information Access extension.
1166 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1168 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
1169 additional bytes when new memory had to be allocated, not just
1170 when reusing an existing buffer.
1173 *) New command line and configuration option 'utf8' for the req command.
1174 This allows field values to be specified as UTF8 strings.
1177 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
1178 runs for the former and machine-readable output for the latter.
1181 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
1182 of the e-mail address in the DN (i.e., it will go into a certificate
1183 extension only). The new configuration file option 'email_in_dn = no'
1184 has the same effect.
1185 [Massimiliano Pala madwolf@openca.org]
1187 *) Change all functions with names starting with des_ to be starting
1188 with DES_ instead. Add wrappers that are compatible with libdes,
1189 but are named _ossl_old_des_*. Finally, add macros that map the
1190 des_* symbols to the corresponding _ossl_old_des_* if libdes
1191 compatibility is desired. If OpenSSL 0.9.6c compatibility is
1192 desired, the des_* symbols will be mapped to DES_*, with one
1195 Since we provide two compatibility mappings, the user needs to
1196 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
1197 compatibility is desired. The default (i.e., when that macro
1198 isn't defined) is OpenSSL 0.9.6c compatibility.
1200 There are also macros that enable and disable the support of old
1201 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
1202 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
1203 are defined, the default will apply: to support the old des routines.
1205 In either case, one must include openssl/des.h to get the correct
1206 definitions. Do not try to just include openssl/des_old.h, that
1209 NOTE: This is a major break of an old API into a new one. Software
1210 authors are encouraged to switch to the DES_ style functions. Some
1211 time in the future, des_old.h and the libdes compatibility functions
1212 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
1213 default), and then completely removed.
1216 *) Test for certificates which contain unsupported critical extensions.
1217 If such a certificate is found during a verify operation it is
1218 rejected by default: this behaviour can be overridden by either
1219 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
1220 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
1221 X509_supported_extension() has also been added which returns 1 if a
1222 particular extension is supported.
1225 *) Modify the behaviour of EVP cipher functions in similar way to digests
1226 to retain compatibility with existing code.
1229 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
1230 compatibility with existing code. In particular the 'ctx' parameter does
1231 not have to be to be initialized before the call to EVP_DigestInit() and
1232 it is tidied up after a call to EVP_DigestFinal(). New function
1233 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
1234 EVP_MD_CTX_copy() changed to not require the destination to be
1235 initialized valid and new function EVP_MD_CTX_copy_ex() added which
1236 requires the destination to be valid.
1238 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
1239 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
1242 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
1243 so that complete 'Handshake' protocol structures are kept in memory
1244 instead of overwriting 'msg_type' and 'length' with 'body' data.
1247 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
1248 [Massimo Santin via Richard Levitte]
1250 *) Major restructuring to the underlying ENGINE code. This includes
1251 reduction of linker bloat, separation of pure "ENGINE" manipulation
1252 (initialisation, etc) from functionality dealing with implementations
1253 of specific crypto iterfaces. This change also introduces integrated
1254 support for symmetric ciphers and digest implementations - so ENGINEs
1255 can now accelerate these by providing EVP_CIPHER and EVP_MD
1256 implementations of their own. This is detailed in crypto/engine/README
1257 as it couldn't be adequately described here. However, there are a few
1258 API changes worth noting - some RSA, DSA, DH, and RAND functions that
1259 were changed in the original introduction of ENGINE code have now
1260 reverted back - the hooking from this code to ENGINE is now a good
1261 deal more passive and at run-time, operations deal directly with
1262 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
1263 dereferencing through an ENGINE pointer any more. Also, the ENGINE
1264 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
1265 they were not being used by the framework as there is no concept of a
1266 BIGNUM_METHOD and they could not be generalised to the new
1267 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
1268 ENGINE_cpy() has been removed as it cannot be consistently defined in
1272 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
1275 *) Change mkdef.pl to sort symbols that get the same entry number,
1276 and make sure the automatically generated functions ERR_load_*
1277 become part of libeay.num as well.
1280 *) New function SSL_renegotiate_pending(). This returns true once
1281 renegotiation has been requested (either SSL_renegotiate() call
1282 or HelloRequest/ClientHello receveived from the peer) and becomes
1283 false once a handshake has been completed.
1284 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
1285 sends a HelloRequest, but does not ensure that a handshake takes
1286 place. SSL_renegotiate_pending() is useful for checking if the
1287 client has followed the request.)
1290 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
1291 By default, clients may request session resumption even during
1292 renegotiation (if session ID contexts permit); with this option,
1293 session resumption is possible only in the first handshake.
1295 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
1296 more bits available for options that should not be part of
1297 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
1300 *) Add some demos for certificate and certificate request creation.
1303 *) Make maximum certificate chain size accepted from the peer application
1304 settable (SSL*_get/set_max_cert_list()), as proposed by
1305 "Douglas E. Engert" <deengert@anl.gov>.
1308 *) Add support for shared libraries for Unixware-7
1309 (Boyd Lynn Gerber <gerberb@zenez.com>).
1312 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
1313 be done prior to destruction. Use this to unload error strings from
1314 ENGINEs that load their own error strings. NB: This adds two new API
1315 functions to "get" and "set" this destroy handler in an ENGINE.
1318 *) Alter all existing ENGINE implementations (except "openssl" and
1319 "openbsd") to dynamically instantiate their own error strings. This
1320 makes them more flexible to be built both as statically-linked ENGINEs
1321 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
1322 Also, add stub code to each that makes building them as self-contained
1323 shared-libraries easier (see README.ENGINE).
1326 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
1327 implementations into applications that are completely implemented in
1328 self-contained shared-libraries. The "dynamic" ENGINE exposes control
1329 commands that can be used to configure what shared-library to load and
1330 to control aspects of the way it is handled. Also, made an update to
1331 the README.ENGINE file that brings its information up-to-date and
1332 provides some information and instructions on the "dynamic" ENGINE
1333 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
1336 *) Make it possible to unload ranges of ERR strings with a new
1337 "ERR_unload_strings" function.
1340 *) Add a copy() function to EVP_MD.
1343 *) Make EVP_MD routines take a context pointer instead of just the
1344 md_data void pointer.
1347 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
1348 that the digest can only process a single chunk of data
1349 (typically because it is provided by a piece of
1350 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
1351 is only going to provide a single chunk of data, and hence the
1352 framework needn't accumulate the data for oneshot drivers.
1355 *) As with "ERR", make it possible to replace the underlying "ex_data"
1356 functions. This change also alters the storage and management of global
1357 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
1358 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
1359 index counters. The API functions that use this state have been changed
1360 to take a "class_index" rather than pointers to the class's local STACK
1361 and counter, and there is now an API function to dynamically create new
1362 classes. This centralisation allows us to (a) plug a lot of the
1363 thread-safety problems that existed, and (b) makes it possible to clean
1364 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
1365 such data would previously have always leaked in application code and
1366 workarounds were in place to make the memory debugging turn a blind eye
1367 to it. Application code that doesn't use this new function will still
1368 leak as before, but their memory debugging output will announce it now
1369 rather than letting it slide.
1371 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
1372 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
1373 has a return value to indicate success or failure.
1376 *) Make it possible to replace the underlying "ERR" functions such that the
1377 global state (2 LHASH tables and 2 locks) is only used by the "default"
1378 implementation. This change also adds two functions to "get" and "set"
1379 the implementation prior to it being automatically set the first time
1380 any other ERR function takes place. Ie. an application can call "get",
1381 pass the return value to a module it has just loaded, and that module
1382 can call its own "set" function using that value. This means the
1383 module's "ERR" operations will use (and modify) the error state in the
1384 application and not in its own statically linked copy of OpenSSL code.
1387 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
1388 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
1389 the operation, and provides a more encapsulated way for external code
1390 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
1391 to use these functions rather than manually incrementing the counts.
1393 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
1396 *) Add EVP test program.
1399 *) Add symmetric cipher support to ENGINE. Expect the API to change!
1402 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
1403 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
1404 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
1405 These allow a CRL to be built without having to access X509_CRL fields
1406 directly. Modify 'ca' application to use new functions.
1409 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
1410 bug workarounds. Rollback attack detection is a security feature.
1411 The problem will only arise on OpenSSL servers when TLSv1 is not
1412 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
1413 Software authors not wanting to support TLSv1 will have special reasons
1414 for their choice and can explicitly enable this option.
1415 [Bodo Moeller, Lutz Jaenicke]
1417 *) Rationalise EVP so it can be extended: don't include a union of
1418 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
1419 (similar to those existing for EVP_CIPHER_CTX).
1424 EVP_MD_CTX_init(&md); /* new function call */
1425 EVP_DigestInit(&md, EVP_sha1());
1426 EVP_DigestUpdate(&md, in, len);
1427 EVP_DigestFinal(&md, out, NULL);
1428 EVP_MD_CTX_cleanup(&md); /* new function call */
1432 *) Make DES key schedule conform to the usual scheme, as well as
1433 correcting its structure. This means that calls to DES functions
1434 now have to pass a pointer to a des_key_schedule instead of a
1435 plain des_key_schedule (which was actually always a pointer
1438 des_key_schedule ks;
1440 des_set_key_checked(..., &ks);
1441 des_ncbc_encrypt(..., &ks, ...);
1443 (Note that a later change renames 'des_...' into 'DES_...'.)
1446 *) Initial reduction of linker bloat: the use of some functions, such as
1447 PEM causes large amounts of unused functions to be linked in due to
1448 poor organisation. For example pem_all.c contains every PEM function
1449 which has a knock on effect of linking in large amounts of (unused)
1450 ASN1 code. Grouping together similar functions and splitting unrelated
1451 functions prevents this.
1454 *) Cleanup of EVP macros.
1457 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
1458 correct _ecb suffix.
1461 *) Add initial OCSP responder support to ocsp application. The
1462 revocation information is handled using the text based index
1463 use by the ca application. The responder can either handle
1464 requests generated internally, supplied in files (for example
1465 via a CGI script) or using an internal minimal server.
1468 *) Add configuration choices to get zlib compression for TLS.
1471 *) Changes to Kerberos SSL for RFC 2712 compliance:
1472 1. Implemented real KerberosWrapper, instead of just using
1473 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
1474 2. Implemented optional authenticator field of KerberosWrapper.
1476 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
1477 and authenticator structs; see crypto/krb5/.
1479 Generalized Kerberos calls to support multiple Kerberos libraries.
1480 [Vern Staats <staatsvr@asc.hpc.mil>,
1481 Jeffrey Altman <jaltman@columbia.edu>
1482 via Richard Levitte]
1484 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
1485 already does with RSA. testdsa.h now has 'priv_key/pub_key'
1486 values for each of the key sizes rather than having just
1487 parameters (and 'speed' generating keys each time).
1490 *) Speed up EVP routines.
1493 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
1494 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
1495 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
1496 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
1498 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
1499 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
1500 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
1503 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
1505 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
1508 *) Added the OS2-EMX target.
1509 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
1511 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
1512 to support NCONF routines in extension code. New function CONF_set_nconf()
1513 to allow functions which take an NCONF to also handle the old LHASH
1514 structure: this means that the old CONF compatible routines can be
1515 retained (in particular wrt extensions) without having to duplicate the
1516 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
1519 *) Enhance the general user interface with mechanisms for inner control
1520 and with possibilities to have yes/no kind of prompts.
1523 *) Change all calls to low level digest routines in the library and
1524 applications to use EVP. Add missing calls to HMAC_cleanup() and
1525 don't assume HMAC_CTX can be copied using memcpy().
1526 [Verdon Walker <VWalker@novell.com>, Steve Henson]
1528 *) Add the possibility to control engines through control names but with
1529 arbitrary arguments instead of just a string.
1530 Change the key loaders to take a UI_METHOD instead of a callback
1531 function pointer. NOTE: this breaks binary compatibility with earlier
1532 versions of OpenSSL [engine].
1533 Adapt the nCipher code for these new conditions and add a card insertion
1537 *) Enhance the general user interface with mechanisms to better support
1538 dialog box interfaces, application-defined prompts, the possibility
1539 to use defaults (for example default passwords from somewhere else)
1540 and interrupts/cancellations.
1543 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
1544 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
1547 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
1548 tidy up some unnecessarily weird code in 'sk_new()').
1549 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
1551 *) Change the key loading routines for ENGINEs to use the same kind
1552 callback (pem_password_cb) as all other routines that need this
1556 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
1557 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
1558 than this minimum value is recommended.
1561 *) New random seeder for OpenVMS, using the system process statistics
1562 that are easily reachable.
1565 *) Windows apparently can't transparently handle global
1566 variables defined in DLLs. Initialisations such as:
1568 const ASN1_ITEM *it = &ASN1_INTEGER_it;
1570 wont compile. This is used by the any applications that need to
1571 declare their own ASN1 modules. This was fixed by adding the option
1572 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
1573 needed for static libraries under Win32.
1576 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
1577 setting of purpose and trust fields. New X509_STORE trust and
1578 purpose functions and tidy up setting in other SSL functions.
1581 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
1582 structure. These are inherited by X509_STORE_CTX when it is
1583 initialised. This allows various defaults to be set in the
1584 X509_STORE structure (such as flags for CRL checking and custom
1585 purpose or trust settings) for functions which only use X509_STORE_CTX
1586 internally such as S/MIME.
1588 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
1589 trust settings if they are not set in X509_STORE. This allows X509_STORE
1590 purposes and trust (in S/MIME for example) to override any set by default.
1592 Add command line options for CRL checking to smime, s_client and s_server
1596 *) Initial CRL based revocation checking. If the CRL checking flag(s)
1597 are set then the CRL is looked up in the X509_STORE structure and
1598 its validity and signature checked, then if the certificate is found
1599 in the CRL the verify fails with a revoked error.
1601 Various new CRL related callbacks added to X509_STORE_CTX structure.
1603 Command line options added to 'verify' application to support this.
1605 This needs some additional work, such as being able to handle multiple
1606 CRLs with different times, extension based lookup (rather than just
1607 by subject name) and ultimately more complete V2 CRL extension
1611 *) Add a general user interface API (crypto/ui/). This is designed
1612 to replace things like des_read_password and friends (backward
1613 compatibility functions using this new API are provided).
1614 The purpose is to remove prompting functions from the DES code
1615 section as well as provide for prompting through dialog boxes in
1616 a window system and the like.
1619 *) Add "ex_data" support to ENGINE so implementations can add state at a
1620 per-structure level rather than having to store it globally.
1623 *) Make it possible for ENGINE structures to be copied when retrieved by
1624 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
1625 This causes the "original" ENGINE structure to act like a template,
1626 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
1627 operational state can be localised to each ENGINE structure, despite the
1628 fact they all share the same "methods". New ENGINE structures returned in
1629 this case have no functional references and the return value is the single
1630 structural reference. This matches the single structural reference returned
1631 by ENGINE_by_id() normally, when it is incremented on the pre-existing
1635 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
1636 needs to match any other type at all we need to manually clear the
1640 *) Changes to the "openssl engine" utility to include;
1641 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
1642 about an ENGINE's available control commands.
1643 - executing control commands from command line arguments using the
1644 '-pre' and '-post' switches. '-post' is only used if '-t' is
1645 specified and the ENGINE is successfully initialised. The syntax for
1646 the individual commands are colon-separated, for example;
1647 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
1650 *) New dynamic control command support for ENGINEs. ENGINEs can now
1651 declare their own commands (numbers), names (strings), descriptions,
1652 and input types for run-time discovery by calling applications. A
1653 subset of these commands are implicitly classed as "executable"
1654 depending on their input type, and only these can be invoked through
1655 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
1656 can be based on user input, config files, etc). The distinction is
1657 that "executable" commands cannot return anything other than a boolean
1658 result and can only support numeric or string input, whereas some
1659 discoverable commands may only be for direct use through
1660 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
1661 pointers, or other custom uses. The "executable" commands are to
1662 support parameterisations of ENGINE behaviour that can be
1663 unambiguously defined by ENGINEs and used consistently across any
1664 OpenSSL-based application. Commands have been added to all the
1665 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
1666 control over shared-library paths without source code alterations.
1669 *) Changed all ENGINE implementations to dynamically allocate their
1670 ENGINEs rather than declaring them statically. Apart from this being
1671 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
1672 this also allows the implementations to compile without using the
1673 internal engine_int.h header.
1676 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
1677 'const' value. Any code that should be able to modify a RAND_METHOD
1678 should already have non-const pointers to it (ie. they should only
1679 modify their own ones).
1682 *) Made a variety of little tweaks to the ENGINE code.
1683 - "atalla" and "ubsec" string definitions were moved from header files
1684 to C code. "nuron" string definitions were placed in variables
1685 rather than hard-coded - allowing parameterisation of these values
1686 later on via ctrl() commands.
1687 - Removed unused "#if 0"'d code.
1688 - Fixed engine list iteration code so it uses ENGINE_free() to release
1689 structural references.
1690 - Constified the RAND_METHOD element of ENGINE structures.
1691 - Constified various get/set functions as appropriate and added
1692 missing functions (including a catch-all ENGINE_cpy that duplicates
1693 all ENGINE values onto a new ENGINE except reference counts/state).
1694 - Removed NULL parameter checks in get/set functions. Setting a method
1695 or function to NULL is a way of cancelling out a previously set
1696 value. Passing a NULL ENGINE parameter is just plain stupid anyway
1697 and doesn't justify the extra error symbols and code.
1698 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
1699 flags from engine_int.h to engine.h.
1700 - Changed prototypes for ENGINE handler functions (init(), finish(),
1701 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
1704 *) Implement binary inversion algorithm for BN_mod_inverse in addition
1705 to the algorithm using long division. The binary algorithm can be
1706 used only if the modulus is odd. On 32-bit systems, it is faster
1707 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
1708 roughly 5-15% for 256-bit moduli), so we use it only for moduli
1709 up to 450 bits. In 64-bit environments, the binary algorithm
1710 appears to be advantageous for much longer moduli; here we use it
1711 for moduli up to 2048 bits.
1714 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
1715 could not support the combine flag in choice fields.
1718 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
1719 extensions from a certificate request to the certificate.
1722 *) Allow multiple 'certopt' and 'nameopt' options to be separated
1723 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
1724 file: this allows the display of the certificate about to be
1725 signed to be customised, to allow certain fields to be included
1726 or excluded and extension details. The old system didn't display
1727 multicharacter strings properly, omitted fields not in the policy
1728 and couldn't display additional details such as extensions.
1731 *) Function EC_POINTs_mul for multiple scalar multiplication
1732 of an arbitrary number of elliptic curve points
1733 \sum scalars[i]*points[i],
1734 optionally including the generator defined for the EC_GROUP:
1735 scalar*generator + \sum scalars[i]*points[i].
1737 EC_POINT_mul is a simple wrapper function for the typical case
1738 that the point list has just one item (besides the optional
1742 *) First EC_METHODs for curves over GF(p):
1744 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
1745 operations and provides various method functions that can also
1746 operate with faster implementations of modular arithmetic.
1748 EC_GFp_mont_method() reuses most functions that are part of
1749 EC_GFp_simple_method, but uses Montgomery arithmetic.
1751 [Bodo Moeller; point addition and point doubling
1752 implementation directly derived from source code provided by
1753 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
1755 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
1756 crypto/ec/ec_lib.c):
1758 Curves are EC_GROUP objects (with an optional group generator)
1759 based on EC_METHODs that are built into the library.
1761 Points are EC_POINT objects based on EC_GROUP objects.
1763 Most of the framework would be able to handle curves over arbitrary
1764 finite fields, but as there are no obvious types for fields other
1765 than GF(p), some functions are limited to that for now.
1768 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
1769 that the file contains a complete HTTP response.
1772 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
1773 change the def and num file printf format specifier from "%-40sXXX"
1774 to "%-39s XXX". The latter will always guarantee a space after the
1775 field while the former will cause them to run together if the field
1776 is 40 of more characters long.
1779 *) Constify the cipher and digest 'method' functions and structures
1780 and modify related functions to take constant EVP_MD and EVP_CIPHER
1784 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
1785 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
1788 *) Modify EVP_Digest*() routines so they now return values. Although the
1789 internal software routines can never fail additional hardware versions
1793 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
1795 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
1796 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
1799 ERR_R_NESTED_ASN1_ERROR
1801 ERR_R_MISSING_ASN1_EOS
1802 were 4 .. 9, conflicting with
1803 ERR_LIB_RSA (= ERR_R_RSA_LIB)
1805 ERR_LIB_PEM (= ERR_R_PEM_LIB).
1806 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
1808 Add new error code 'ERR_R_INTERNAL_ERROR'.
1811 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
1815 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
1816 sets the subject name for a new request or supersedes the
1817 subject name in a given request. Formats that can be parsed are
1818 'CN=Some Name, OU=myOU, C=IT'
1820 'CN=Some Name/OU=myOU/C=IT'.
1822 Add options '-batch' and '-verbose' to 'openssl req'.
1823 [Massimiliano Pala <madwolf@hackmasters.net>]
1825 *) Introduce the possibility to access global variables through
1826 functions on platform were that's the best way to handle exporting
1827 global variables in shared libraries. To enable this functionality,
1828 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
1829 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
1830 is normally done by Configure or something similar).
1832 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
1833 in the source file (foo.c) like this:
1835 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
1836 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
1838 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
1839 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
1841 OPENSSL_DECLARE_GLOBAL(int,foo);
1842 #define foo OPENSSL_GLOBAL_REF(foo)
1843 OPENSSL_DECLARE_GLOBAL(double,bar);
1844 #define bar OPENSSL_GLOBAL_REF(bar)
1846 The #defines are very important, and therefore so is including the
1847 header file everywhere where the defined globals are used.
1849 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
1850 of ASN.1 items, but that structure is a bit different.
1852 The largest change is in util/mkdef.pl which has been enhanced with
1853 better and easier to understand logic to choose which symbols should
1854 go into the Windows .def files as well as a number of fixes and code
1855 cleanup (among others, algorithm keywords are now sorted
1856 lexicographically to avoid constant rewrites).
1859 *) In BN_div() keep a copy of the sign of 'num' before writing the
1860 result to 'rm' because if rm==num the value will be overwritten
1861 and produce the wrong result if 'num' is negative: this caused
1862 problems with BN_mod() and BN_nnmod().
1865 *) Function OCSP_request_verify(). This checks the signature on an
1866 OCSP request and verifies the signer certificate. The signer
1867 certificate is just checked for a generic purpose and OCSP request
1871 *) Add OCSP_check_validity() function to check the validity of OCSP
1872 responses. OCSP responses are prepared in real time and may only
1873 be a few seconds old. Simply checking that the current time lies
1874 between thisUpdate and nextUpdate max reject otherwise valid responses
1875 caused by either OCSP responder or client clock inaccuracy. Instead
1876 we allow thisUpdate and nextUpdate to fall within a certain period of
1877 the current time. The age of the response can also optionally be
1878 checked. Two new options -validity_period and -status_age added to
1882 *) If signature or public key algorithm is unrecognized print out its
1883 OID rather that just UNKNOWN.
1886 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
1887 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
1888 ID to be generated from the issuer certificate alone which can then be
1889 passed to OCSP_id_issuer_cmp().
1892 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
1893 ASN1 modules to export functions returning ASN1_ITEM pointers
1894 instead of the ASN1_ITEM structures themselves. This adds several
1895 new macros which allow the underlying ASN1 function/structure to
1896 be accessed transparently. As a result code should not use ASN1_ITEM
1897 references directly (such as &X509_it) but instead use the relevant
1898 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
1899 use of the new ASN1 code on platforms where exporting structures
1900 is problematical (for example in shared libraries) but exporting
1901 functions returning pointers to structures is not.
1904 *) Add support for overriding the generation of SSL/TLS session IDs.
1905 These callbacks can be registered either in an SSL_CTX or per SSL.
1906 The purpose of this is to allow applications to control, if they wish,
1907 the arbitrary values chosen for use as session IDs, particularly as it
1908 can be useful for session caching in multiple-server environments. A
1909 command-line switch for testing this (and any client code that wishes
1910 to use such a feature) has been added to "s_server".
1911 [Geoff Thorpe, Lutz Jaenicke]
1913 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
1914 of the form '#if defined(...) || defined(...) || ...' and
1915 '#if !defined(...) && !defined(...) && ...'. This also avoids
1916 the growing number of special cases it was previously handling.
1919 *) Make all configuration macros available for application by making
1920 sure they are available in opensslconf.h, by giving them names starting
1921 with "OPENSSL_" to avoid conflicts with other packages and by making
1922 sure e_os2.h will cover all platform-specific cases together with
1924 Additionally, it is now possible to define configuration/platform-
1925 specific names (called "system identities"). In the C code, these
1926 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
1927 macro with the name beginning with "OPENSSL_SYS_", which is determined
1928 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
1932 *) New option -set_serial to 'req' and 'x509' this allows the serial
1933 number to use to be specified on the command line. Previously self
1934 signed certificates were hard coded with serial number 0 and the
1935 CA options of 'x509' had to use a serial number in a file which was
1939 *) New options to 'ca' utility to support V2 CRL entry extensions.
1940 Currently CRL reason, invalidity date and hold instruction are
1941 supported. Add new CRL extensions to V3 code and some new objects.
1944 *) New function EVP_CIPHER_CTX_set_padding() this is used to
1945 disable standard block padding (aka PKCS#5 padding) in the EVP
1946 API, which was previously mandatory. This means that the data is
1947 not padded in any way and so the total length much be a multiple
1948 of the block size, otherwise an error occurs.
1951 *) Initial (incomplete) OCSP SSL support.
1954 *) New function OCSP_parse_url(). This splits up a URL into its host,
1955 port and path components: primarily to parse OCSP URLs. New -url
1956 option to ocsp utility.
1959 *) New nonce behavior. The return value of OCSP_check_nonce() now
1960 reflects the various checks performed. Applications can decide
1961 whether to tolerate certain situations such as an absent nonce
1962 in a response when one was present in a request: the ocsp application
1963 just prints out a warning. New function OCSP_add1_basic_nonce()
1964 this is to allow responders to include a nonce in a response even if
1965 the request is nonce-less.
1968 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
1969 skipped when using openssl x509 multiple times on a single input file,
1970 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
1973 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
1974 set string type: to handle setting ASN1_TIME structures. Fix ca
1975 utility to correctly initialize revocation date of CRLs.
1978 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
1979 the clients preferred ciphersuites and rather use its own preferences.
1980 Should help to work around M$ SGC (Server Gated Cryptography) bug in
1981 Internet Explorer by ensuring unchanged hash method during stepup.
1982 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
1985 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
1986 to aes and add a new 'exist' option to print out symbols that don't
1990 *) Additional options to ocsp utility to allow flags to be set and
1991 additional certificates supplied.
1994 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
1995 OCSP client a number of certificate to only verify the response
1999 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
2000 handle the new API. Currently only ECB, CBC modes supported. Add new
2003 Add TLS AES ciphersuites as described in RFC3268, "Advanced
2004 Encryption Standard (AES) Ciphersuites for Transport Layer
2005 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
2006 not enabled by default and were not part of the "ALL" ciphersuite
2007 alias because they were not yet official; they could be
2008 explicitly requested by specifying the "AESdraft" ciphersuite
2009 group alias. In the final release of OpenSSL 0.9.7, the group
2010 alias is called "AES" and is part of "ALL".)
2011 [Ben Laurie, Steve Henson, Bodo Moeller]
2013 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
2014 request to response.
2017 *) Functions for OCSP responders. OCSP_request_onereq_count(),
2018 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
2019 extract information from a certificate request. OCSP_response_create()
2020 creates a response and optionally adds a basic response structure.
2021 OCSP_basic_add1_status() adds a complete single response to a basic
2022 response and returns the OCSP_SINGLERESP structure just added (to allow
2023 extensions to be included for example). OCSP_basic_add1_cert() adds a
2024 certificate to a basic response and OCSP_basic_sign() signs a basic
2025 response with various flags. New helper functions ASN1_TIME_check()
2026 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
2027 (converts ASN1_TIME to GeneralizedTime).
2030 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
2031 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
2032 structure from a certificate. X509_pubkey_digest() digests the public_key
2033 contents: this is used in various key identifiers.
2036 *) Make sk_sort() tolerate a NULL argument.
2037 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
2039 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
2040 passed by the function are trusted implicitly. If any of them signed the
2041 response then it is assumed to be valid and is not verified.
2044 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
2045 to data. This was previously part of the PKCS7 ASN1 code. This
2046 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
2047 [Steve Henson, reported by Kenneth R. Robinette
2048 <support@securenetterm.com>]
2050 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
2051 routines: without these tracing memory leaks is very painful.
2052 Fix leaks in PKCS12 and PKCS7 routines.
2055 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
2056 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
2057 effectively meant GeneralizedTime would never be used. Now it
2058 is initialised to -1 but X509_time_adj() now has to check the value
2059 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
2060 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
2061 [Steve Henson, reported by Kenneth R. Robinette
2062 <support@securenetterm.com>]
2064 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
2065 result in a zero length in the ASN1_INTEGER structure which was
2066 not consistent with the structure when d2i_ASN1_INTEGER() was used
2067 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
2068 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
2069 where it did not print out a minus for negative ASN1_INTEGER.
2072 *) Add summary printout to ocsp utility. The various functions which
2073 convert status values to strings have been renamed to:
2074 OCSP_response_status_str(), OCSP_cert_status_str() and
2075 OCSP_crl_reason_str() and are no longer static. New options
2076 to verify nonce values and to disable verification. OCSP response
2077 printout format cleaned up.
2080 *) Add additional OCSP certificate checks. These are those specified
2081 in RFC2560. This consists of two separate checks: the CA of the
2082 certificate being checked must either be the OCSP signer certificate
2083 or the issuer of the OCSP signer certificate. In the latter case the
2084 OCSP signer certificate must contain the OCSP signing extended key
2085 usage. This check is performed by attempting to match the OCSP
2086 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
2087 in the OCSP_CERTID structures of the response.
2090 *) Initial OCSP certificate verification added to OCSP_basic_verify()
2091 and related routines. This uses the standard OpenSSL certificate
2092 verify routines to perform initial checks (just CA validity) and
2093 to obtain the certificate chain. Then additional checks will be
2094 performed on the chain. Currently the root CA is checked to see
2095 if it is explicitly trusted for OCSP signing. This is used to set
2096 a root CA as a global signing root: that is any certificate that
2097 chains to that CA is an acceptable OCSP signing certificate.
2100 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
2101 extensions from a separate configuration file.
2102 As when reading extensions from the main configuration file,
2103 the '-extensions ...' option may be used for specifying the
2105 [Massimiliano Pala <madwolf@comune.modena.it>]
2107 *) New OCSP utility. Allows OCSP requests to be generated or
2108 read. The request can be sent to a responder and the output
2109 parsed, outputed or printed in text form. Not complete yet:
2110 still needs to check the OCSP response validity.
2113 *) New subcommands for 'openssl ca':
2114 'openssl ca -status <serial>' prints the status of the cert with
2115 the given serial number (according to the index file).
2116 'openssl ca -updatedb' updates the expiry status of certificates
2118 [Massimiliano Pala <madwolf@comune.modena.it>]
2120 *) New '-newreq-nodes' command option to CA.pl. This is like
2121 '-newreq', but calls 'openssl req' with the '-nodes' option
2122 so that the resulting key is not encrypted.
2123 [Damien Miller <djm@mindrot.org>]
2125 *) New configuration for the GNU Hurd.
2126 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
2128 *) Initial code to implement OCSP basic response verify. This
2129 is currently incomplete. Currently just finds the signer's
2130 certificate and verifies the signature on the response.
2133 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
2134 value of OPENSSLDIR. This is available via the new '-d' option
2135 to 'openssl version', and is also included in 'openssl version -a'.
2138 *) Allowing defining memory allocation callbacks that will be given
2139 file name and line number information in additional arguments
2140 (a const char* and an int). The basic functionality remains, as
2141 well as the original possibility to just replace malloc(),
2142 realloc() and free() by functions that do not know about these
2143 additional arguments. To register and find out the current
2144 settings for extended allocation functions, the following
2145 functions are provided:
2147 CRYPTO_set_mem_ex_functions
2148 CRYPTO_set_locked_mem_ex_functions
2149 CRYPTO_get_mem_ex_functions
2150 CRYPTO_get_locked_mem_ex_functions
2152 These work the same way as CRYPTO_set_mem_functions and friends.
2153 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
2154 extended allocation function is enabled.
2155 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
2156 a conventional allocation function is enabled.
2157 [Richard Levitte, Bodo Moeller]
2159 *) Finish off removing the remaining LHASH function pointer casts.
2160 There should no longer be any prototype-casting required when using
2161 the LHASH abstraction, and any casts that remain are "bugs". See
2162 the callback types and macros at the head of lhash.h for details
2163 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
2166 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
2167 If /dev/[u]random devices are not available or do not return enough
2168 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
2170 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
2171 /etc/entropy will be queried once each in this sequence, quering stops
2172 when enough entropy was collected without querying more sockets.
2175 *) Change the Unix RAND_poll() variant to be able to poll several
2176 random devices, as specified by DEVRANDOM, until a sufficient amount
2177 of data has been collected. We spend at most 10 ms on each file
2178 (select timeout) and read in non-blocking mode. DEVRANDOM now
2179 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
2180 (previously it was just the string "/dev/urandom"), so on typical
2181 platforms the 10 ms delay will never occur.
2182 Also separate out the Unix variant to its own file, rand_unix.c.
2183 For VMS, there's a currently-empty rand_vms.c.
2186 *) Move OCSP client related routines to ocsp_cl.c. These
2187 provide utility functions which an application needing
2188 to issue a request to an OCSP responder and analyse the
2189 response will typically need: as opposed to those which an
2190 OCSP responder itself would need which will be added later.
2192 OCSP_request_sign() signs an OCSP request with an API similar
2193 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
2194 response. OCSP_response_get1_basic() extracts basic response
2195 from response. OCSP_resp_find_status(): finds and extracts status
2196 information from an OCSP_CERTID structure (which will be created
2197 when the request structure is built). These are built from lower
2198 level functions which work on OCSP_SINGLERESP structures but
2199 wont normally be used unless the application wishes to examine
2200 extensions in the OCSP response for example.
2202 Replace nonce routines with a pair of functions.
2203 OCSP_request_add1_nonce() adds a nonce value and optionally
2204 generates a random value. OCSP_check_nonce() checks the
2205 validity of the nonce in an OCSP response.
2208 *) Change function OCSP_request_add() to OCSP_request_add0_id().
2209 This doesn't copy the supplied OCSP_CERTID and avoids the
2210 need to free up the newly created id. Change return type
2211 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
2212 This can then be used to add extensions to the request.
2213 Deleted OCSP_request_new(), since most of its functionality
2214 is now in OCSP_REQUEST_new() (and the case insensitive name
2215 clash) apart from the ability to set the request name which
2216 will be added elsewhere.
2219 *) Update OCSP API. Remove obsolete extensions argument from
2220 various functions. Extensions are now handled using the new
2221 OCSP extension code. New simple OCSP HTTP function which
2222 can be used to send requests and parse the response.
2225 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
2226 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
2227 uses the special reorder version of SET OF to sort the attributes
2228 and reorder them to match the encoded order. This resolves a long
2229 standing problem: a verify on a PKCS7 structure just after signing
2230 it used to fail because the attribute order did not match the
2231 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
2232 it uses the received order. This is necessary to tolerate some broken
2233 software that does not order SET OF. This is handled by encoding
2234 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
2235 to produce the required SET OF.
2238 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
2239 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
2240 files to get correct declarations of the ASN.1 item variables.
2243 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
2244 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
2245 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
2246 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
2247 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
2248 ASN1_ITEM and no wrapper functions.
2251 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
2252 replace the old function pointer based I/O routines. Change most of
2253 the *_d2i_bio() and *_d2i_fp() functions to use these.
2256 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
2257 lines, recognice more "algorithms" that can be deselected, and make
2258 it complain about algorithm deselection that isn't recognised.
2261 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
2262 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
2263 to use new functions. Add NO_ASN1_OLD which can be set to remove
2264 some old style ASN1 functions: this can be used to determine if old
2265 code will still work when these eventually go away.
2268 *) New extension functions for OCSP structures, these follow the
2269 same conventions as certificates and CRLs.
2272 *) New function X509V3_add1_i2d(). This automatically encodes and
2273 adds an extension. Its behaviour can be customised with various
2274 flags to append, replace or delete. Various wrappers added for
2275 certifcates and CRLs.
2278 *) Fix to avoid calling the underlying ASN1 print routine when
2279 an extension cannot be parsed. Correct a typo in the
2280 OCSP_SERVICELOC extension. Tidy up print OCSP format.
2283 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
2284 entries for variables.
2287 *) Add functionality to apps/openssl.c for detecting locking
2288 problems: As the program is single-threaded, all we have
2289 to do is register a locking callback using an array for
2290 storing which locks are currently held by the program.
2293 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
2294 SSL_get_ex_data_X509_STORE_idx(), which is used in
2295 ssl_verify_cert_chain() and thus can be called at any time
2296 during TLS/SSL handshakes so that thread-safety is essential.
2297 Unfortunately, the ex_data design is not at all suited
2298 for multi-threaded use, so it probably should be abolished.
2301 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
2302 [Broadcom, tweaked and integrated by Geoff Thorpe]
2304 *) Move common extension printing code to new function
2305 X509V3_print_extensions(). Reorganise OCSP print routines and
2306 implement some needed OCSP ASN1 functions. Add OCSP extensions.
2309 *) New function X509_signature_print() to remove duplication in some
2313 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
2314 set (this was treated exactly the same as SET OF previously). This
2315 is used to reorder the STACK representing the structure to match the
2316 encoding. This will be used to get round a problem where a PKCS7
2317 structure which was signed could not be verified because the STACK
2318 order did not reflect the encoded order.
2321 *) Reimplement the OCSP ASN1 module using the new code.
2324 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
2325 for its ASN1 operations. The old style function pointers still exist
2326 for now but they will eventually go away.
2329 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
2330 completely replaces the old ASN1 functionality with a table driven
2331 encoder and decoder which interprets an ASN1_ITEM structure describing
2332 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
2333 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
2334 has also been converted to the new form.
2337 *) Change BN_mod_exp_recp so that negative moduli are tolerated
2338 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
2339 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
2340 for negative moduli.
2343 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
2344 of not touching the result's sign bit.
2347 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
2351 *) Changed the LHASH code to use prototypes for callbacks, and created
2352 macros to declare and implement thin (optionally static) functions
2353 that provide type-safety and avoid function pointer casting for the
2354 type-specific callbacks.
2357 *) Added Kerberos Cipher Suites to be used with TLS, as written in
2359 [Veers Staats <staatsvr@asc.hpc.mil>,
2360 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
2362 *) Reformat the FAQ so the different questions and answers can be divided
2363 in sections depending on the subject.
2366 *) Have the zlib compression code load ZLIB.DLL dynamically under
2370 *) New function BN_mod_sqrt for computing square roots modulo a prime
2371 (using the probabilistic Tonelli-Shanks algorithm unless
2372 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
2373 be handled deterministically).
2374 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
2376 *) Make BN_mod_inverse faster by explicitly handling small quotients
2377 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
2378 512 bits], about 30% for larger ones [1024 or 2048 bits].)
2381 *) New function BN_kronecker.
2384 *) Fix BN_gcd so that it works on negative inputs; the result is
2385 positive unless both parameters are zero.
2386 Previously something reasonably close to an infinite loop was
2387 possible because numbers could be growing instead of shrinking
2388 in the implementation of Euclid's algorithm.
2391 *) Fix BN_is_word() and BN_is_one() macros to take into account the
2392 sign of the number in question.
2394 Fix BN_is_word(a,w) to work correctly for w == 0.
2396 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
2397 because its test if the absolute value of 'a' equals 'w'.
2398 Note that BN_abs_is_word does *not* handle w == 0 reliably;
2399 it exists mostly for use in the implementations of BN_is_zero(),
2400 BN_is_one(), and BN_is_word().
2403 *) New function BN_swap.
2406 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
2407 the exponentiation functions are more likely to produce reasonable
2408 results on negative inputs.
2411 *) Change BN_mod_mul so that the result is always non-negative.
2412 Previously, it could be negative if one of the factors was negative;
2413 I don't think anyone really wanted that behaviour.
2416 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
2417 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
2418 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
2419 and add new functions:
2428 BN_mod_lshift1_quick
2432 These functions always generate non-negative results.
2434 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
2435 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
2437 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
2438 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
2439 be reduced modulo m.
2440 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
2443 The following entry accidentily appeared in the CHANGES file
2444 distributed with OpenSSL 0.9.7. The modifications described in
2445 it do *not* apply to OpenSSL 0.9.7.
2447 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
2448 was actually never needed) and in BN_mul(). The removal in BN_mul()
2449 required a small change in bn_mul_part_recursive() and the addition
2450 of the functions bn_cmp_part_words(), bn_sub_part_words() and
2451 bn_add_part_words(), which do the same thing as bn_cmp_words(),
2452 bn_sub_words() and bn_add_words() except they take arrays with
2457 *) In 'openssl passwd', verify passwords read from the terminal
2458 unless the '-salt' option is used (which usually means that
2459 verification would just waste user's time since the resulting
2460 hash is going to be compared with some given password hash)
2461 or the new '-noverify' option is used.
2463 This is an incompatible change, but it does not affect
2464 non-interactive use of 'openssl passwd' (passwords on the command
2465 line, '-stdin' option, '-in ...' option) and thus should not
2469 *) Remove all references to RSAref, since there's no more need for it.
2472 *) Make DSO load along a path given through an environment variable
2473 (SHLIB_PATH) with shl_load().
2476 *) Constify the ENGINE code as a result of BIGNUM constification.
2477 Also constify the RSA code and most things related to it. In a
2478 few places, most notable in the depth of the ASN.1 code, ugly
2479 casts back to non-const were required (to be solved at a later
2483 *) Make it so the openssl application has all engines loaded by default.
2486 *) Constify the BIGNUM routines a little more.
2489 *) Add the following functions:
2491 ENGINE_load_cswift()
2493 ENGINE_load_atalla()
2495 ENGINE_load_builtin_engines()
2497 That way, an application can itself choose if external engines that
2498 are built-in in OpenSSL shall ever be used or not. The benefit is
2499 that applications won't have to be linked with libdl or other dso
2500 libraries unless it's really needed.
2502 Changed 'openssl engine' to load all engines on demand.
2503 Changed the engine header files to avoid the duplication of some
2504 declarations (they differed!).
2507 *) 'openssl engine' can now list capabilities.
2510 *) Better error reporting in 'openssl engine'.
2513 *) Never call load_dh_param(NULL) in s_server.
2516 *) Add engine application. It can currently list engines by name and
2517 identity, and test if they are actually available.
2520 *) Improve RPM specification file by forcing symbolic linking and making
2521 sure the installed documentation is also owned by root.root.
2522 [Damien Miller <djm@mindrot.org>]
2524 *) Give the OpenSSL applications more possibilities to make use of
2525 keys (public as well as private) handled by engines.
2528 *) Add OCSP code that comes from CertCo.
2531 *) Add VMS support for the Rijndael code.
2534 *) Added untested support for Nuron crypto accelerator.
2537 *) Add support for external cryptographic devices. This code was
2538 previously distributed separately as the "engine" branch.
2539 [Geoff Thorpe, Richard Levitte]
2541 *) Rework the filename-translation in the DSO code. It is now possible to
2542 have far greater control over how a "name" is turned into a filename
2543 depending on the operating environment and any oddities about the
2544 different shared library filenames on each system.
2547 *) Support threads on FreeBSD-elf in Configure.
2550 *) Fix for SHA1 assembly problem with MASM: it produces
2551 warnings about corrupt line number information when assembling
2552 with debugging information. This is caused by the overlapping
2554 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
2557 NCONF_get_number() has no error checking at all. As a replacement,
2558 NCONF_get_number_e() is defined (_e for "error checking") and is
2559 promoted strongly. The old NCONF_get_number is kept around for
2560 binary backward compatibility.
2561 Make it possible for methods to load from something other than a BIO,
2562 by providing a function pointer that is given a name instead of a BIO.
2563 For example, this could be used to load configuration data from an
2567 *) Fix for non blocking accept BIOs. Added new I/O special reason
2568 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
2569 with non blocking I/O was not possible because no retry code was
2570 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
2574 *) Added the beginnings of Rijndael support.
2577 *) Fix for bug in DirectoryString mask setting. Add support for
2578 X509_NAME_print_ex() in 'req' and X509_print_ex() function
2579 to allow certificate printing to more controllable, additional
2580 'certopt' option to 'x509' to allow new printing options to be
2584 *) Clean old EAY MD5 hack from e_os.h.
2587 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
2589 *) Fix various bugs revealed by running the NISCC test suite:
2591 Stop out of bounds reads in the ASN1 code when presented with
2592 invalid tags (CAN-2003-0543 and CAN-2003-0544).
2594 If verify callback ignores invalid public key errors don't try to check
2595 certificate signature with the NULL public key.
2599 *) Fix various bugs revealed by running the NISCC test suite:
2601 Stop out of bounds reads in the ASN1 code when presented with
2602 invalid tags (CAN-2003-0543 and CAN-2003-0544).
2604 If verify callback ignores invalid public key errors don't try to check
2605 certificate signature with the NULL public key.
2609 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
2610 if the server requested one: as stated in TLS 1.0 and SSL 3.0
2614 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
2615 extra data after the compression methods not only for TLS 1.0
2616 but also for SSL 3.0 (as required by the specification).
2617 [Bodo Moeller; problem pointed out by Matthias Loepfe]
2619 *) Change X509_certificate_type() to mark the key as exported/exportable
2620 when it's 512 *bits* long, not 512 bytes.
2623 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
2625 *) Countermeasure against the Klima-Pokorny-Rosa extension of
2626 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
2627 a protocol version number mismatch like a decryption error
2628 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
2631 *) Turn on RSA blinding by default in the default implementation
2632 to avoid a timing attack. Applications that don't want it can call
2633 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
2634 They would be ill-advised to do so in most cases.
2635 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
2637 *) Change RSA blinding code so that it works when the PRNG is not
2638 seeded (in this case, the secret RSA exponent is abused as
2639 an unpredictable seed -- if it is not unpredictable, there
2640 is no point in blinding anyway). Make RSA blinding thread-safe
2641 by remembering the creator's thread ID in rsa->blinding and
2642 having all other threads use local one-time blinding factors
2643 (this requires more computation than sharing rsa->blinding, but
2644 avoids excessive locking; and if an RSA object is not shared
2645 between threads, blinding will still be very fast).
2648 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
2650 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
2651 via timing by performing a MAC computation even if incorrrect
2652 block cipher padding has been found. This is a countermeasure
2653 against active attacks where the attacker has to distinguish
2654 between bad padding and a MAC verification error. (CAN-2003-0078)
2656 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
2657 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
2658 Martin Vuagnoux (EPFL, Ilion)]
2660 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
2662 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
2663 memory from it's contents. This is done with a counter that will
2664 place alternating values in each byte. This can be used to solve
2665 two issues: 1) the removal of calls to memset() by highly optimizing
2666 compilers, and 2) cleansing with other values than 0, since those can
2667 be read through on certain media, for example a swap space on disk.
2670 *) Bugfix: client side session caching did not work with external caching,
2671 because the session->cipher setting was not restored when reloading
2672 from the external cache. This problem was masked, when
2673 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
2674 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
2677 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
2678 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
2679 [Zeev Lieber <zeev-l@yahoo.com>]
2681 *) Undo an undocumented change introduced in 0.9.6e which caused
2682 repeated calls to OpenSSL_add_all_ciphers() and
2683 OpenSSL_add_all_digests() to be ignored, even after calling
2687 *) Change the default configuration reader to deal with last line not
2688 being properly terminated.
2691 *) Change X509_NAME_cmp() so it applies the special rules on handling
2692 DN values that are of type PrintableString, as well as RDNs of type
2693 emailAddress where the value has the type ia5String.
2694 [stefank@valicert.com via Richard Levitte]
2696 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
2697 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
2698 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
2699 the bitwise-OR of the two for use by the majority of applications
2700 wanting this behaviour, and update the docs. The documented
2701 behaviour and actual behaviour were inconsistent and had been
2702 changing anyway, so this is more a bug-fix than a behavioural
2704 [Geoff Thorpe, diagnosed by Nadav Har'El]
2706 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
2707 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
2710 *) Fix initialization code race conditions in
2711 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
2712 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
2713 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
2714 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
2715 ssl2_get_cipher_by_char(),
2716 ssl3_get_cipher_by_char().
2717 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
2719 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
2720 the cached sessions are flushed, as the remove_cb() might use ex_data
2721 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
2722 (see [openssl.org #212]).
2723 [Geoff Thorpe, Lutz Jaenicke]
2725 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
2726 length, instead of the encoding length to d2i_ASN1_OBJECT.
2729 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
2731 *) [In 0.9.6g-engine release:]
2732 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
2733 [Lynn Gazis <lgazis@rainbow.com>]
2735 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
2737 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
2738 and get fix the header length calculation.
2739 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
2740 Alon Kantor <alonk@checkpoint.com> (and others),
2743 *) Use proper error handling instead of 'assertions' in buffer
2744 overflow checks added in 0.9.6e. This prevents DoS (the
2745 assertions could call abort()).
2746 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
2748 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
2750 *) Add various sanity checks to asn1_get_length() to reject
2751 the ASN1 length bytes if they exceed sizeof(long), will appear
2752 negative or the content length exceeds the length of the
2754 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
2756 *) Fix cipher selection routines: ciphers without encryption had no flags
2757 for the cipher strength set and where therefore not handled correctly
2758 by the selection routines (PR #130).
2761 *) Fix EVP_dsa_sha macro.
2765 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
2766 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
2767 that was added in OpenSSL 0.9.6d.
2769 As the countermeasure turned out to be incompatible with some
2770 broken SSL implementations, the new option is part of SSL_OP_ALL.
2771 SSL_OP_ALL is usually employed when compatibility with weird SSL
2772 implementations is desired (e.g. '-bugs' option to 's_client' and
2773 's_server'), so the new option is automatically set in many
2777 *) Changes in security patch:
2779 Changes marked "(CHATS)" were sponsored by the Defense Advanced
2780 Research Projects Agency (DARPA) and Air Force Research Laboratory,
2781 Air Force Materiel Command, USAF, under agreement number
2784 *) Add various sanity checks to asn1_get_length() to reject
2785 the ASN1 length bytes if they exceed sizeof(long), will appear
2786 negative or the content length exceeds the length of the
2787 supplied buffer. (CAN-2002-0659)
2788 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
2790 *) Assertions for various potential buffer overflows, not known to
2792 [Ben Laurie (CHATS)]
2794 *) Various temporary buffers to hold ASCII versions of integers were
2795 too small for 64 bit platforms. (CAN-2002-0655)
2796 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
2798 *) Remote buffer overflow in SSL3 protocol - an attacker could
2799 supply an oversized session ID to a client. (CAN-2002-0656)
2800 [Ben Laurie (CHATS)]
2802 *) Remote buffer overflow in SSL2 protocol - an attacker could
2803 supply an oversized client master key. (CAN-2002-0656)
2804 [Ben Laurie (CHATS)]
2806 Changes between 0.9.6c and 0.9.6d [9 May 2002]
2808 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
2809 encoded as NULL) with id-dsa-with-sha1.
2810 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
2812 *) Check various X509_...() return values in apps/req.c.
2813 [Nils Larsch <nla@trustcenter.de>]
2815 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
2816 an end-of-file condition would erronously be flagged, when the CRLF
2817 was just at the end of a processed block. The bug was discovered when
2818 processing data through a buffering memory BIO handing the data to a
2819 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
2820 <ptsekov@syntrex.com> and Nedelcho Stanev.
2823 *) Implement a countermeasure against a vulnerability recently found
2824 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
2825 before application data chunks to avoid the use of known IVs
2826 with data potentially chosen by the attacker.
2829 *) Fix length checks in ssl3_get_client_hello().
2832 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
2833 to prevent ssl3_read_internal() from incorrectly assuming that
2834 ssl3_read_bytes() found application data while handshake
2835 processing was enabled when in fact s->s3->in_read_app_data was
2836 merely automatically cleared during the initial handshake.
2837 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
2839 *) Fix object definitions for Private and Enterprise: they were not
2840 recognized in their shortname (=lowercase) representation. Extend
2841 obj_dat.pl to issue an error when using undefined keywords instead
2842 of silently ignoring the problem (Svenning Sorensen
2843 <sss@sss.dnsalias.net>).
2846 *) Fix DH_generate_parameters() so that it works for 'non-standard'
2847 generators, i.e. generators other than 2 and 5. (Previously, the
2848 code did not properly initialise the 'add' and 'rem' values to
2849 BN_generate_prime().)
2851 In the new general case, we do not insist that 'generator' is
2852 actually a primitive root: This requirement is rather pointless;
2853 a generator of the order-q subgroup is just as good, if not
2857 *) Map new X509 verification errors to alerts. Discovered and submitted by
2858 Tom Wu <tom@arcot.com>.
2861 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
2862 returning non-zero before the data has been completely received
2863 when using non-blocking I/O.
2864 [Bodo Moeller; problem pointed out by John Hughes]
2866 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
2867 [Ben Laurie, Lutz Jaenicke]
2869 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
2870 Yoram Zahavi <YoramZ@gilian.com>).
2873 *) Add information about CygWin 1.3 and on, and preserve proper
2874 configuration for the versions before that.
2875 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
2877 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
2878 check whether we deal with a copy of a session and do not delete from
2879 the cache in this case. Problem reported by "Izhar Shoshani Levi"
2880 <izhar@checkpoint.com>.
2883 *) Do not store session data into the internal session cache, if it
2884 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
2885 flag is set). Proposed by Aslam <aslam@funk.com>.
2888 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
2892 *) [In 0.9.6d-engine release:]
2893 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
2894 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
2896 *) Add the configuration target linux-s390x.
2897 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
2899 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
2900 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
2901 variable as an indication that a ClientHello message has been
2902 received. As the flag value will be lost between multiple
2903 invocations of ssl3_accept when using non-blocking I/O, the
2904 function may not be aware that a handshake has actually taken
2905 place, thus preventing a new session from being added to the
2908 To avoid this problem, we now set s->new_session to 2 instead of
2909 using a local variable.
2910 [Lutz Jaenicke, Bodo Moeller]
2912 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
2913 if the SSL_R_LENGTH_MISMATCH error is detected.
2914 [Geoff Thorpe, Bodo Moeller]
2916 *) New 'shared_ldflag' column in Configure platform table.
2919 *) Fix EVP_CIPHER_mode macro.
2920 ["Dan S. Camper" <dan@bti.net>]
2922 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
2923 type, we must throw them away by setting rr->length to 0.
2924 [D P Chang <dpc@qualys.com>]
2926 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
2928 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
2929 <Dominikus.Scherkl@biodata.com>. (The previous implementation
2930 worked incorrectly for those cases where range = 10..._2 and
2931 3*range is two bits longer than range.)
2934 *) Only add signing time to PKCS7 structures if it is not already
2938 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
2939 OBJ_ld_ce should be OBJ_id_ce.
2940 Also some ip-pda OIDs in crypto/objects/objects.txt were
2941 incorrect (cf. RFC 3039).
2942 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
2944 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
2945 returns early because it has nothing to do.
2946 [Andy Schneider <andy.schneider@bjss.co.uk>]
2948 *) [In 0.9.6c-engine release:]
2949 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
2950 [Andy Schneider <andy.schneider@bjss.co.uk>]
2952 *) [In 0.9.6c-engine release:]
2953 Add support for Cryptographic Appliance's keyserver technology.
2954 (Use engine 'keyclient')
2955 [Cryptographic Appliances and Geoff Thorpe]
2957 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
2958 is called via tools/c89.sh because arguments have to be
2959 rearranged (all '-L' options must appear before the first object
2961 [Richard Shapiro <rshapiro@abinitio.com>]
2963 *) [In 0.9.6c-engine release:]
2964 Add support for Broadcom crypto accelerator cards, backported
2966 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
2968 *) [In 0.9.6c-engine release:]
2969 Add support for SureWare crypto accelerator cards from
2970 Baltimore Technologies. (Use engine 'sureware')
2971 [Baltimore Technologies and Mark Cox]
2973 *) [In 0.9.6c-engine release:]
2974 Add support for crypto accelerator cards from Accelerated
2975 Encryption Processing, www.aep.ie. (Use engine 'aep')
2976 [AEP Inc. and Mark Cox]
2978 *) Add a configuration entry for gcc on UnixWare.
2979 [Gary Benson <gbenson@redhat.com>]
2981 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
2982 messages are stored in a single piece (fixed-length part and
2983 variable-length part combined) and fix various bugs found on the way.
2986 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
2987 instead. BIO_gethostbyname() does not know what timeouts are
2988 appropriate, so entries would stay in cache even when they have
2990 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
2992 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
2993 faced with a pathologically small ClientHello fragment that does
2994 not contain client_version: Instead of aborting with an error,
2995 simply choose the highest available protocol version (i.e.,
2996 TLS 1.0 unless it is disabled). In practice, ClientHello
2997 messages are never sent like this, but this change gives us
2998 strictly correct behaviour at least for TLS.
3001 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
3002 never resets s->method to s->ctx->method when called from within
3003 one of the SSL handshake functions.
3004 [Bodo Moeller; problem pointed out by Niko Baric]
3006 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
3007 (sent using the client's version number) if client_version is
3008 smaller than the protocol version in use. Also change
3009 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
3010 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
3011 the client will at least see that alert.
3014 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
3018 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
3019 client receives HelloRequest while in a handshake.
3020 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
3022 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
3023 should end in 'break', not 'goto end' which circuments various
3024 cleanups done in state SSL_ST_OK. But session related stuff
3025 must be disabled for SSL_ST_OK in the case that we just sent a
3028 Also avoid some overhead by not calling ssl_init_wbio_buffer()
3029 before just sending a HelloRequest.
3030 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
3032 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
3033 reveal whether illegal block cipher padding was found or a MAC
3034 verification error occured. (Neither SSLerr() codes nor alerts
3035 are directly visible to potential attackers, but the information
3036 may leak via logfiles.)
3038 Similar changes are not required for the SSL 2.0 implementation
3039 because the number of padding bytes is sent in clear for SSL 2.0,
3040 and the extra bytes are just ignored. However ssl/s2_pkt.c
3041 failed to verify that the purported number of padding bytes is in
3045 *) Add OpenUNIX-8 support including shared libraries
3046 (Boyd Lynn Gerber <gerberb@zenez.com>).
3049 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
3050 'wristwatch attack' using huge encoding parameters (cf.
3051 James H. Manger's CRYPTO 2001 paper). Note that the
3052 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
3053 encoding parameters and hence was not vulnerable.
3056 *) BN_sqr() bug fix.
3057 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
3059 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
3060 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
3061 followed by modular reduction.
3062 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
3064 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
3065 equivalent based on BN_pseudo_rand() instead of BN_rand().
3068 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
3069 This function was broken, as the check for a new client hello message
3070 to handle SGC did not allow these large messages.
3071 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
3074 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
3077 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
3078 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
3081 *) Rework the configuration and shared library support for Tru64 Unix.
3082 The configuration part makes use of modern compiler features and
3083 still retains old compiler behavior for those that run older versions
3084 of the OS. The shared library support part includes a variant that
3085 uses the RPATH feature, and is available through the special
3086 configuration target "alpha-cc-rpath", which will never be selected
3088 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
3090 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
3091 with the same message size as in ssl3_get_certificate_request().
3092 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
3093 messages might inadvertently be reject as too long.
3094 [Petr Lampa <lampa@fee.vutbr.cz>]
3096 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
3099 *) Modified SSL library such that the verify_callback that has been set
3100 specificly for an SSL object with SSL_set_verify() is actually being
3101 used. Before the change, a verify_callback set with this function was
3102 ignored and the verify_callback() set in the SSL_CTX at the time of
3103 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
3104 to allow the necessary settings.
3107 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
3108 explicitly to NULL, as at least on Solaris 8 this seems not always to be
3109 done automatically (in contradiction to the requirements of the C
3110 standard). This made problems when used from OpenSSH.
3113 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
3114 dh->length and always used
3116 BN_rand_range(priv_key, dh->p).
3118 BN_rand_range() is not necessary for Diffie-Hellman, and this
3119 specific range makes Diffie-Hellman unnecessarily inefficient if
3120 dh->length (recommended exponent length) is much smaller than the
3121 length of dh->p. We could use BN_rand_range() if the order of
3122 the subgroup was stored in the DH structure, but we only have
3127 BN_rand(priv_key, l, ...)
3129 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
3135 RSA_eay_public_encrypt
3136 RSA_eay_private_decrypt
3137 RSA_eay_private_encrypt (signing)
3138 RSA_eay_public_decrypt (signature verification)
3140 (default implementations for RSA_public_encrypt,
3141 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
3142 always reject numbers >= n.
3145 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
3146 to synchronize access to 'locking_thread'. This is necessary on
3147 systems where access to 'locking_thread' (an 'unsigned long'
3148 variable) is not atomic.
3151 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
3152 *before* setting the 'crypto_lock_rand' flag. The previous code had
3153 a race condition if 0 is a valid thread ID.
3154 [Travis Vitek <vitek@roguewave.com>]
3156 *) Add support for shared libraries under Irix.
3157 [Albert Chin-A-Young <china@thewrittenword.com>]
3159 *) Add configuration option to build on Linux on both big-endian and
3161 [Ralf Baechle <ralf@uni-koblenz.de>]
3163 *) Add the possibility to create shared libraries on HP-UX.
3166 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
3168 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
3169 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
3170 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
3171 PRNG state recovery was possible based on the output of
3172 one PRNG request appropriately sized to gain knowledge on
3173 'md' followed by enough consecutive 1-byte PRNG requests
3174 to traverse all of 'state'.
3176 1. When updating 'md_local' (the current thread's copy of 'md')
3177 during PRNG output generation, hash all of the previous
3178 'md_local' value, not just the half used for PRNG output.
3180 2. Make the number of bytes from 'state' included into the hash
3181 independent from the number of PRNG bytes requested.
3183 The first measure alone would be sufficient to avoid
3184 Markku-Juhani's attack. (Actually it had never occurred
3185 to me that the half of 'md_local' used for chaining was the
3186 half from which PRNG output bytes were taken -- I had always
3187 assumed that the secret half would be used.) The second
3188 measure makes sure that additional data from 'state' is never
3189 mixed into 'md_local' in small portions; this heuristically
3190 further strengthens the PRNG.
3193 *) Fix crypto/bn/asm/mips3.s.
3196 *) When only the key is given to "enc", the IV is undefined. Print out
3197 an error message in this case.
3200 *) Handle special case when X509_NAME is empty in X509 printing routines.
3203 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
3204 positive and less than q.
3207 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
3208 used: it isn't thread safe and the add_lock_callback should handle
3210 [Paul Rose <Paul.Rose@bridge.com>]
3212 *) Verify that incoming data obeys the block size in
3213 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
3217 [Ulf Möller, Bodo Möller]
3219 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
3220 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
3221 when fixing the server behaviour for backwards-compatible 'client
3222 hello' messages. (Note that the attack is impractical against
3223 SSL 3.0 and TLS 1.0 anyway because length and version checking
3224 means that the probability of guessing a valid ciphertext is
3225 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
3228 Before 0.9.5, the countermeasure (hide the error by generating a
3229 random 'decryption result') did not work properly because
3230 ERR_clear_error() was missing, meaning that SSL_get_error() would
3231 detect the supposedly ignored error.
3233 Both problems are now fixed.
3236 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
3237 (previously it was 1024).
3240 *) Fix for compatibility mode trust settings: ignore trust settings
3241 unless some valid trust or reject settings are present.
3244 *) Fix for blowfish EVP: its a variable length cipher.
3247 *) Fix various bugs related to DSA S/MIME verification. Handle missing
3248 parameters in DSA public key structures and return an error in the
3249 DSA routines if parameters are absent.
3252 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
3253 in the current directory if neither $RANDFILE nor $HOME was set.
3254 RAND_file_name() in 0.9.6a returned NULL in this case. This has
3255 caused some confusion to Windows users who haven't defined $HOME.
3256 Thus RAND_file_name() is changed again: e_os.h can define a
3257 DEFAULT_HOME, which will be used if $HOME is not set.
3258 For Windows, we use "C:"; on other platforms, we still require
3259 environment variables.
3261 *) Move 'if (!initialized) RAND_poll()' into regions protected by
3262 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
3263 having multiple threads call RAND_poll() concurrently.
3266 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
3267 combination of a flag and a thread ID variable.
3268 Otherwise while one thread is in ssleay_rand_bytes (which sets the
3269 flag), *other* threads can enter ssleay_add_bytes without obeying
3270 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
3271 that they do not hold after the first thread unsets add_do_not_lock).
3274 *) Change bctest again: '-x' expressions are not available in all
3278 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
3280 *) Fix a couple of memory leaks in PKCS7_dataDecode()
3281 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
3283 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
3284 the default extension for executables, if any. Also, make the perl
3285 scripts that use symlink() to test if it really exists and use "cp"
3286 if it doesn't. All this made OpenSSL compilable and installable in
3290 *) Fix for asn1_GetSequence() for indefinite length constructed data.
3291 If SEQUENCE is length is indefinite just set c->slen to the total
3292 amount of data available.
3293 [Steve Henson, reported by shige@FreeBSD.org]
3294 [This change does not apply to 0.9.7.]
3296 *) Change bctest to avoid here-documents inside command substitution
3297 (workaround for FreeBSD /bin/sh bug).
3298 For compatibility with Ultrix, avoid shell functions (introduced
3299 in the bctest version that searches along $PATH).
3302 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
3303 with des_encrypt() defined on some operating systems, like Solaris
3307 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
3308 On the Importance of Eliminating Errors in Cryptographic
3309 Computations, J. Cryptology 14 (2001) 2, 101-119,
3310 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
3313 *) MIPS assembler BIGNUM division bug fix.
3316 *) Disabled incorrect Alpha assembler code.
3319 *) Fix PKCS#7 decode routines so they correctly update the length
3320 after reading an EOC for the EXPLICIT tag.
3322 [This change does not apply to 0.9.7.]
3324 *) Fix bug in PKCS#12 key generation routines. This was triggered
3325 if a 3DES key was generated with a 0 initial byte. Include
3326 PKCS12_BROKEN_KEYGEN compilation option to retain the old
3327 (but broken) behaviour.
3330 *) Enhance bctest to search for a working bc along $PATH and print
3332 [Tim Rice <tim@multitalents.net> via Richard Levitte]
3334 *) Fix memory leaks in err.c: free err_data string if necessary;
3335 don't write to the wrong index in ERR_set_error_data.
3338 *) Implement ssl23_peek (analogous to ssl23_read), which previously
3342 *) Replace rdtsc with _emit statements for VC++ version 5.
3343 [Jeremy Cooper <jeremy@baymoo.org>]
3345 *) Make it possible to reuse SSLv2 sessions.
3348 *) In copy_email() check for >= 0 as a return value for
3349 X509_NAME_get_index_by_NID() since 0 is a valid index.
3350 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
3352 *) Avoid coredump with unsupported or invalid public keys by checking if
3353 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
3354 PKCS7_verify() fails with non detached data.
3357 *) Don't use getenv in library functions when run as setuid/setgid.
3358 New function OPENSSL_issetugid().
3361 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
3362 due to incorrect handling of multi-threading:
3364 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
3366 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
3368 3. Count how many times MemCheck_off() has been called so that
3369 nested use can be treated correctly. This also avoids
3370 inband-signalling in the previous code (which relied on the
3371 assumption that thread ID 0 is impossible).
3374 *) Add "-rand" option also to s_client and s_server.
3377 *) Fix CPU detection on Irix 6.x.
3378 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
3379 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
3381 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
3384 [This change does not apply to 0.9.7.]
3386 *) Use the cached encoding of an X509_NAME structure rather than
3387 copying it. This is apparently the reason for the libsafe "errors"
3388 but the code is actually correct.
3391 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
3392 Bleichenbacher's DSA attack.
3393 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
3394 to be set and top=0 forces the highest bit to be set; top=-1 is new
3395 and leaves the highest bit random.
3396 [Ulf Moeller, Bodo Moeller]
3398 *) In the NCONF_...-based implementations for CONF_... queries
3399 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
3400 a temporary CONF structure with the data component set to NULL
3401 (which gives segmentation faults in lh_retrieve).
3402 Instead, use NULL for the CONF pointer in CONF_get_string and
3403 CONF_get_number (which may use environment variables) and directly
3404 return NULL from CONF_get_section.
3407 *) Fix potential buffer overrun for EBCDIC.
3410 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
3411 keyUsage if basicConstraints absent for a CA.
3414 *) Make SMIME_write_PKCS7() write mail header values with a format that
3415 is more generally accepted (no spaces before the semicolon), since
3416 some programs can't parse those values properly otherwise. Also make
3417 sure BIO's that break lines after each write do not create invalid
3421 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
3422 macros previously used would not encode an empty SEQUENCE OF
3423 and break the signature.
3425 [This change does not apply to 0.9.7.]
3427 *) Zero the premaster secret after deriving the master secret in
3431 *) Add some EVP_add_digest_alias registrations (as found in
3432 OpenSSL_add_all_digests()) to SSL_library_init()
3433 aka OpenSSL_add_ssl_algorithms(). This provides improved
3434 compatibility with peers using X.509 certificates
3435 with unconventional AlgorithmIdentifier OIDs.
3438 *) Fix for Irix with NO_ASM.
3439 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
3441 *) ./config script fixes.
3442 [Ulf Moeller, Richard Levitte]
3444 *) Fix 'openssl passwd -1'.
3447 *) Change PKCS12_key_gen_asc() so it can cope with non null
3448 terminated strings whose length is passed in the passlen
3449 parameter, for example from PEM callbacks. This was done
3450 by adding an extra length parameter to asc2uni().
3451 [Steve Henson, reported by <oddissey@samsung.co.kr>]
3453 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
3454 call failed, free the DSA structure.
3457 *) Fix to uni2asc() to cope with zero length Unicode strings.
3458 These are present in some PKCS#12 files.
3461 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
3462 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
3463 when writing a 32767 byte record.
3464 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
3466 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
3467 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
3469 (RSA objects have a reference count access to which is protected
3470 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
3471 so they are meant to be shared between threads.)
3472 [Bodo Moeller, Geoff Thorpe; original patch submitted by
3473 "Reddie, Steven" <Steven.Reddie@ca.com>]
3475 *) Fix a deadlock in CRYPTO_mem_leaks().
3478 *) Use better test patterns in bntest.
3481 *) rand_win.c fix for Borland C.
3484 *) BN_rshift bugfix for n == 0.
3487 *) Add a 'bctest' script that checks for some known 'bc' bugs
3488 so that 'make test' does not abort just because 'bc' is broken.
3491 *) Store verify_result within SSL_SESSION also for client side to
3492 avoid potential security hole. (Re-used sessions on the client side
3493 always resulted in verify_result==X509_V_OK, not using the original
3494 result of the server certificate verification.)
3497 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
3498 SSL3_RT_APPLICATION_DATA, return 0.
3499 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
3503 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
3504 releases, have been re-implemented by renaming the previous
3505 implementations of ssl2_read and ssl3_read to ssl2_read_internal
3506 and ssl3_read_internal, respectively, and adding 'peek' parameters
3507 to them. The new ssl[23]_{read,peek} functions are calls to
3508 ssl[23]_read_internal with the 'peek' flag set appropriately.
3509 A 'peek' parameter has also been added to ssl3_read_bytes, which
3510 does the actual work for ssl3_read_internal.
3513 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
3514 the method-specific "init()" handler. Also clean up ex_data after
3515 calling the method-specific "finish()" handler. Previously, this was
3516 happening the other way round.
3519 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
3520 The previous value, 12, was not always sufficient for BN_mod_exp().
3523 *) Make sure that shared libraries get the internal name engine with
3524 the full version number and not just 0. This should mark the
3525 shared libraries as not backward compatible. Of course, this should
3526 be changed again when we can guarantee backward binary compatibility.
3529 *) Fix typo in get_cert_by_subject() in by_dir.c
3530 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
3532 *) Rework the system to generate shared libraries:
3534 - Make note of the expected extension for the shared libraries and
3535 if there is a need for symbolic links from for example libcrypto.so.0
3536 to libcrypto.so.0.9.7. There is extended info in Configure for
3539 - Make as few rebuilds of the shared libraries as possible.
3541 - Still avoid linking the OpenSSL programs with the shared libraries.
3543 - When installing, install the shared libraries separately from the
3547 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
3549 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
3550 and not in SSL_clear because the latter is also used by the
3551 accept/connect functions; previously, the settings made by
3552 SSL_set_read_ahead would be lost during the handshake.
3553 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
3555 *) Correct util/mkdef.pl to be selective about disabled algorithms.
3556 Previously, it would create entries for disableed algorithms no
3560 *) Added several new manual pages for SSL_* function.
3563 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
3565 *) In ssl23_get_client_hello, generate an error message when faced
3566 with an initial SSL 3.0/TLS record that is too small to contain the
3567 first two bytes of the ClientHello message, i.e. client_version.
3568 (Note that this is a pathologic case that probably has never happened
3569 in real life.) The previous approach was to use the version number
3570 from the record header as a substitute; but our protocol choice
3571 should not depend on that one because it is not authenticated
3572 by the Finished messages.
3575 *) More robust randomness gathering functions for Windows.
3576 [Jeffrey Altman <jaltman@columbia.edu>]
3578 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
3579 not set then we don't setup the error code for issuer check errors
3580 to avoid possibly overwriting other errors which the callback does
3581 handle. If an application does set the flag then we assume it knows
3582 what it is doing and can handle the new informational codes
3586 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
3587 a general "ANY" type, as such it should be able to decode anything
3588 including tagged types. However it didn't check the class so it would
3589 wrongly interpret tagged types in the same way as their universal
3590 counterpart and unknown types were just rejected. Changed so that the
3591 tagged and unknown types are handled in the same way as a SEQUENCE:
3592 that is the encoding is stored intact. There is also a new type
3593 "V_ASN1_OTHER" which is used when the class is not universal, in this
3594 case we have no idea what the actual type is so we just lump them all
3598 *) On VMS, stdout may very well lead to a file that is written to
3599 in a record-oriented fashion. That means that every write() will
3600 write a separate record, which will be read separately by the
3601 programs trying to read from it. This can be very confusing.
3603 The solution is to put a BIO filter in the way that will buffer
3604 text until a linefeed is reached, and then write everything a
3605 line at a time, so every record written will be an actual line,
3606 not chunks of lines and not (usually doesn't happen, but I've
3607 seen it once) several lines in one record. BIO_f_linebuffer() is
3610 Currently, it's a VMS-only method, because that's where it has
3611 been tested well enough.
3614 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
3615 it can return incorrect results.
3616 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
3617 but it was in 0.9.6-beta[12].)
3620 *) Disable the check for content being present when verifying detached
3621 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
3622 include zero length content when signing messages.
3625 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
3626 BIO_ctrl (for BIO pairs).
3629 *) Add DSO method for VMS.
3632 *) Bug fix: Montgomery multiplication could produce results with the
3636 *) Add RPM specification openssl.spec and modify it to build three
3637 packages. The default package contains applications, application
3638 documentation and run-time libraries. The devel package contains
3639 include files, static libraries and function documentation. The
3640 doc package contains the contents of the doc directory. The original
3641 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
3644 *) Add a large number of documentation files for many SSL routines.
3645 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
3647 *) Add a configuration entry for Sony News 4.
3648 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
3650 *) Don't set the two most significant bits to one when generating a
3651 random number < q in the DSA library.
3654 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
3655 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
3656 the underlying transport is blocking) if a handshake took place.
3657 (The default behaviour is needed by applications such as s_client
3658 and s_server that use select() to determine when to use SSL_read;
3659 but for applications that know in advance when to expect data, it
3660 just makes things more complicated.)
3663 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
3667 *) Add a few more EBCDIC conditionals that make `req' and `x509'
3668 work better on such systems.
3669 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
3671 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
3672 Update PKCS12_parse() so it copies the friendlyName and the
3673 keyid to the certificates aux info.
3676 *) Fix bug in PKCS7_verify() which caused an infinite loop
3677 if there was more than one signature.
3678 [Sven Uszpelkat <su@celocom.de>]
3680 *) Major change in util/mkdef.pl to include extra information
3681 about each symbol, as well as presentig variables as well
3682 as functions. This change means that there's n more need
3683 to rebuild the .num files when some algorithms are excluded.
3686 *) Allow the verify time to be set by an application,
3687 rather than always using the current time.
3690 *) Phase 2 verify code reorganisation. The certificate
3691 verify code now looks up an issuer certificate by a
3692 number of criteria: subject name, authority key id
3693 and key usage. It also verifies self signed certificates
3694 by the same criteria. The main comparison function is
3695 X509_check_issued() which performs these checks.
3697 Lot of changes were necessary in order to support this
3698 without completely rewriting the lookup code.
3700 Authority and subject key identifier are now cached.
3702 The LHASH 'certs' is X509_STORE has now been replaced
3703 by a STACK_OF(X509_OBJECT). This is mainly because an
3704 LHASH can't store or retrieve multiple objects with
3705 the same hash value.
3707 As a result various functions (which were all internal
3708 use only) have changed to handle the new X509_STORE
3709 structure. This will break anything that messed round
3710 with X509_STORE internally.
3712 The functions X509_STORE_add_cert() now checks for an
3713 exact match, rather than just subject name.
3715 The X509_STORE API doesn't directly support the retrieval
3716 of multiple certificates matching a given criteria, however
3717 this can be worked round by performing a lookup first
3718 (which will fill the cache with candidate certificates)
3719 and then examining the cache for matches. This is probably
3720 the best we can do without throwing out X509_LOOKUP
3721 entirely (maybe later...).
3723 The X509_VERIFY_CTX structure has been enhanced considerably.
3725 All certificate lookup operations now go via a get_issuer()
3726 callback. Although this currently uses an X509_STORE it
3727 can be replaced by custom lookups. This is a simple way
3728 to bypass the X509_STORE hackery necessary to make this
3729 work and makes it possible to use more efficient techniques
3730 in future. A very simple version which uses a simple
3731 STACK for its trusted certificate store is also provided
3732 using X509_STORE_CTX_trusted_stack().
3734 The verify_cb() and verify() callbacks now have equivalents
3735 in the X509_STORE_CTX structure.
3737 X509_STORE_CTX also has a 'flags' field which can be used
3738 to customise the verify behaviour.
3741 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
3742 excludes S/MIME capabilities.
3745 *) When a certificate request is read in keep a copy of the
3746 original encoding of the signed data and use it when outputing
3747 again. Signatures then use the original encoding rather than
3748 a decoded, encoded version which may cause problems if the
3749 request is improperly encoded.
3752 *) For consistency with other BIO_puts implementations, call
3753 buffer_write(b, ...) directly in buffer_puts instead of calling
3756 In BIO_puts, increment b->num_write as in BIO_write.
3757 [Peter.Sylvester@EdelWeb.fr]
3759 *) Fix BN_mul_word for the case where the word is 0. (We have to use
3760 BN_zero, we may not return a BIGNUM with an array consisting of
3764 *) Avoid calling abort() from within the library when problems are
3765 detected, except if preprocessor symbols have been defined
3766 (such as REF_CHECK, BN_DEBUG etc.).
3769 *) New openssl application 'rsautl'. This utility can be
3770 used for low level RSA operations. DER public key
3771 BIO/fp routines also added.
3774 *) New Configure entry and patches for compiling on QNX 4.
3775 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
3777 *) A demo state-machine implementation was sponsored by
3778 Nuron (http://www.nuron.com/) and is now available in
3779 demos/state_machine.
3782 *) New options added to the 'dgst' utility for signature
3783 generation and verification.
3786 *) Unrecognized PKCS#7 content types are now handled via a
3787 catch all ASN1_TYPE structure. This allows unsupported
3788 types to be stored as a "blob" and an application can
3789 encode and decode it manually.
3792 *) Fix various signed/unsigned issues to make a_strex.c
3794 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
3796 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
3797 length if passed a buffer. ASN1_INTEGER_to_BN failed
3798 if passed a NULL BN and its argument was negative.
3799 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
3801 *) Modification to PKCS#7 encoding routines to output definite
3802 length encoding. Since currently the whole structures are in
3803 memory there's not real point in using indefinite length
3804 constructed encoding. However if OpenSSL is compiled with
3805 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
3808 *) Added BIO_vprintf() and BIO_vsnprintf().
3811 *) Added more prefixes to parse for in the the strings written
3812 through a logging bio, to cover all the levels that are available
3813 through syslog. The prefixes are now:
3815 PANIC, EMERG, EMR => LOG_EMERG
3816 ALERT, ALR => LOG_ALERT
3817 CRIT, CRI => LOG_CRIT
3818 ERROR, ERR => LOG_ERR
3819 WARNING, WARN, WAR => LOG_WARNING
3820 NOTICE, NOTE, NOT => LOG_NOTICE
3821 INFO, INF => LOG_INFO
3822 DEBUG, DBG => LOG_DEBUG
3824 and as before, if none of those prefixes are present at the
3825 beginning of the string, LOG_ERR is chosen.
3827 On Win32, the LOG_* levels are mapped according to this:
3829 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
3830 LOG_WARNING => EVENTLOG_WARNING_TYPE
3831 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
3835 *) Made it possible to reconfigure with just the configuration
3836 argument "reconf" or "reconfigure". The command line arguments
3837 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
3838 and are retrieved from there when reconfiguring.
3842 [Assar Westerlund <assar@sics.se>, Richard Levitte]
3844 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
3847 *) The obj_dat.pl script was messing up the sorting of object
3848 names. The reason was that it compared the quoted version
3849 of strings as a result "OCSP" > "OCSP Signing" because
3850 " > SPACE. Changed script to store unquoted versions of
3851 names and add quotes on output. It was also omitting some
3852 names from the lookup table if they were given a default
3853 value (that is if SN is missing it is given the same
3854 value as LN and vice versa), these are now added on the
3855 grounds that if an object has a name we should be able to
3856 look it up. Finally added warning output when duplicate
3857 short or long names are found.
3860 *) Changes needed for Tandem NSK.
3861 [Scott Uroff <scott@xypro.com>]
3863 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
3864 RSA_padding_check_SSLv23(), special padding was never detected
3865 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
3866 version rollback attacks was not effective.
3868 In s23_clnt.c, don't use special rollback-attack detection padding
3869 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
3870 client; similarly, in s23_srvr.c, don't do the rollback check if
3871 SSL 2.0 is the only protocol enabled in the server.
3874 *) Make it possible to get hexdumps of unprintable data with 'openssl
3875 asn1parse'. By implication, the functions ASN1_parse_dump() and
3876 BIO_dump_indent() are added.
3879 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
3880 these print out strings and name structures based on various
3881 flags including RFC2253 support and proper handling of
3882 multibyte characters. Added options to the 'x509' utility
3883 to allow the various flags to be set.
3886 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
3887 Also change the functions X509_cmp_current_time() and
3888 X509_gmtime_adj() work with an ASN1_TIME structure,
3889 this will enable certificates using GeneralizedTime in validity
3890 dates to be checked.
3893 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
3894 negative public key encodings) on by default,
3895 NO_NEG_PUBKEY_BUG can be set to disable it.
3898 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
3899 content octets. An i2c_ASN1_OBJECT is unnecessary because
3900 the encoding can be trivially obtained from the structure.
3903 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
3904 not read locks (CRYPTO_r_[un]lock).
3907 *) A first attempt at creating official support for shared
3908 libraries through configuration. I've kept it so the
3909 default is static libraries only, and the OpenSSL programs
3910 are always statically linked for now, but there are
3911 preparations for dynamic linking in place.
3912 This has been tested on Linux and Tru64.
3915 *) Randomness polling function for Win9x, as described in:
3916 Peter Gutmann, Software Generation of Practically Strong
3920 *) Fix so PRNG is seeded in req if using an already existing
3924 *) New options to smime application. -inform and -outform
3925 allow alternative formats for the S/MIME message including
3926 PEM and DER. The -content option allows the content to be
3927 specified separately. This should allow things like Netscape
3928 form signing output easier to verify.
3931 *) Fix the ASN1 encoding of tags using the 'long form'.
3934 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
3935 STRING types. These convert content octets to and from the
3936 underlying type. The actual tag and length octets are
3937 already assumed to have been read in and checked. These
3938 are needed because all other string types have virtually
3939 identical handling apart from the tag. By having versions
3940 of the ASN1 functions that just operate on content octets
3941 IMPLICIT tagging can be handled properly. It also allows
3942 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
3943 and ASN1_INTEGER are identical apart from the tag.
3946 *) Change the handling of OID objects as follows:
3948 - New object identifiers are inserted in objects.txt, following
3949 the syntax given in objects.README.
3950 - objects.pl is used to process obj_mac.num and create a new
3952 - obj_dat.pl is used to create a new obj_dat.h, using the data in
3955 This is currently kind of a hack, and the perl code in objects.pl
3956 isn't very elegant, but it works as I intended. The simplest way
3957 to check that it worked correctly is to look in obj_dat.h and
3958 check the array nid_objs and make sure the objects haven't moved
3959 around (this is important!). Additions are OK, as well as
3960 consistent name changes.
3963 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
3966 *) Addition of the command line parameter '-rand file' to 'openssl req'.
3967 The given file adds to whatever has already been seeded into the
3968 random pool through the RANDFILE configuration file option or
3969 environment variable, or the default random state file.
3972 *) mkstack.pl now sorts each macro group into lexical order.
3973 Previously the output order depended on the order the files
3974 appeared in the directory, resulting in needless rewriting
3978 *) Patches to make OpenSSL compile under Win32 again. Mostly
3979 work arounds for the VC++ problem that it treats func() as
3980 func(void). Also stripped out the parts of mkdef.pl that
3981 added extra typesafe functions: these no longer exist.
3984 *) Reorganisation of the stack code. The macros are now all
3985 collected in safestack.h . Each macro is defined in terms of
3986 a "stack macro" of the form SKM_<name>(type, a, b). The
3987 DEBUG_SAFESTACK is now handled in terms of function casts,
3988 this has the advantage of retaining type safety without the
3989 use of additional functions. If DEBUG_SAFESTACK is not defined
3990 then the non typesafe macros are used instead. Also modified the
3991 mkstack.pl script to handle the new form. Needs testing to see
3992 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
3993 the default if no major problems. Similar behaviour for ASN1_SET_OF
3994 and PKCS12_STACK_OF.
3997 *) When some versions of IIS use the 'NET' form of private key the
3998 key derivation algorithm is different. Normally MD5(password) is
3999 used as a 128 bit RC4 key. In the modified case
4000 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
4001 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
4002 as the old Netscape_RSA functions except they have an additional
4003 'sgckey' parameter which uses the modified algorithm. Also added
4004 an -sgckey command line option to the rsa utility. Thanks to
4005 Adrian Peck <bertie@ncipher.com> for posting details of the modified
4006 algorithm to openssl-dev.
4009 *) The evp_local.h macros were using 'c.##kname' which resulted in
4010 invalid expansion on some systems (SCO 5.0.5 for example).
4011 Corrected to 'c.kname'.
4012 [Phillip Porch <root@theporch.com>]
4014 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
4015 a STACK of email addresses from a certificate or request, these look
4016 in the subject name and the subject alternative name extensions and
4017 omit any duplicate addresses.
4020 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
4021 This makes DSA verification about 2 % faster.
4024 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
4025 (meaning that now 2^5 values will be precomputed, which is only 4 KB
4026 plus overhead for 1024 bit moduli).
4027 This makes exponentiations about 0.5 % faster for 1024 bit
4028 exponents (as measured by "openssl speed rsa2048").
4031 *) Rename memory handling macros to avoid conflicts with other
4033 Malloc => OPENSSL_malloc
4034 Malloc_locked => OPENSSL_malloc_locked
4035 Realloc => OPENSSL_realloc
4036 Free => OPENSSL_free
4039 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
4040 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
4043 *) CygWin32 support.
4044 [John Jarvie <jjarvie@newsguy.com>]
4046 *) The type-safe stack code has been rejigged. It is now only compiled
4047 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
4048 by default all type-specific stack functions are "#define"d back to
4049 standard stack functions. This results in more streamlined output
4050 but retains the type-safety checking possibilities of the original
4054 *) The STACK code has been cleaned up, and certain type declarations
4055 that didn't make a lot of sense have been brought in line. This has
4056 also involved a cleanup of sorts in safestack.h to more correctly
4057 map type-safe stack functions onto their plain stack counterparts.
4058 This work has also resulted in a variety of "const"ifications of
4059 lots of the code, especially "_cmp" operations which should normally
4060 be prototyped with "const" parameters anyway.
4063 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
4064 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
4065 (The PRNG state consists of two parts, the large pool 'state' and 'md',
4066 where all of 'md' is used each time the PRNG is used, but 'state'
4067 is used only indexed by a cyclic counter. As entropy may not be
4068 well distributed from the beginning, 'md' is important as a
4069 chaining variable. However, the output function chains only half
4070 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
4071 all of 'md', and seeding with STATE_SIZE dummy bytes will result
4072 in all of 'state' being rewritten, with the new values depending
4073 on virtually all of 'md'. This overcomes the 80 bit limitation.)
4076 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
4077 the handshake is continued after ssl_verify_cert_chain();
4078 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
4079 can lead to 'unexplainable' connection aborts later.
4080 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
4082 *) Major EVP API cipher revision.
4083 Add hooks for extra EVP features. This allows various cipher
4084 parameters to be set in the EVP interface. Support added for variable
4085 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
4086 setting of RC2 and RC5 parameters.
4088 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
4091 Remove lots of duplicated code from the EVP library. For example *every*
4092 cipher init() function handles the 'iv' in the same way according to the
4093 cipher mode. They also all do nothing if the 'key' parameter is NULL and
4094 for CFB and OFB modes they zero ctx->num.
4096 New functionality allows removal of S/MIME code RC2 hack.
4098 Most of the routines have the same form and so can be declared in terms
4101 By shifting this to the top level EVP_CipherInit() it can be removed from
4102 all individual ciphers. If the cipher wants to handle IVs or keys
4103 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
4106 Change lots of functions like EVP_EncryptUpdate() to now return a
4107 value: although software versions of the algorithms cannot fail
4108 any installed hardware versions can.
4111 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
4112 this option is set, tolerate broken clients that send the negotiated
4113 protocol version number instead of the requested protocol version
4117 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
4118 i.e. non-zero for export ciphersuites, zero otherwise.
4119 Previous versions had this flag inverted, inconsistent with
4120 rsa_tmp_cb (..._TMP_RSA_CB).
4121 [Bodo Moeller; problem reported by Amit Chopra]
4123 *) Add missing DSA library text string. Work around for some IIS
4124 key files with invalid SEQUENCE encoding.
4127 *) Add a document (doc/standards.txt) that list all kinds of standards
4128 and so on that are implemented in OpenSSL.
4131 *) Enhance c_rehash script. Old version would mishandle certificates
4132 with the same subject name hash and wouldn't handle CRLs at all.
4133 Added -fingerprint option to crl utility, to support new c_rehash
4137 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
4140 *) Fix for SSL server purpose checking. Server checking was
4141 rejecting certificates which had extended key usage present
4142 but no ssl client purpose.
4143 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
4145 *) Make PKCS#12 code work with no password. The PKCS#12 spec
4146 is a little unclear about how a blank password is handled.
4147 Since the password in encoded as a BMPString with terminating
4148 double NULL a zero length password would end up as just the
4149 double NULL. However no password at all is different and is
4150 handled differently in the PKCS#12 key generation code. NS
4151 treats a blank password as zero length. MSIE treats it as no
4152 password on export: but it will try both on import. We now do
4153 the same: PKCS12_parse() tries zero length and no password if
4154 the password is set to "" or NULL (NULL is now a valid password:
4155 it wasn't before) as does the pkcs12 application.
4158 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
4159 perror when PEM_read_bio_X509_REQ fails, the error message must
4160 be obtained from the error queue.
4163 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
4164 it in ERR_remove_state if appropriate, and change ERR_get_state
4165 accordingly to avoid race conditions (this is necessary because
4166 thread_hash is no longer constant once set).
4169 *) Bugfix for linux-elf makefile.one.
4172 *) RSA_get_default_method() will now cause a default
4173 RSA_METHOD to be chosen if one doesn't exist already.
4174 Previously this was only set during a call to RSA_new()
4175 or RSA_new_method(NULL) meaning it was possible for
4176 RSA_get_default_method() to return NULL.
4179 *) Added native name translation to the existing DSO code
4180 that will convert (if the flag to do so is set) filenames
4181 that are sufficiently small and have no path information
4182 into a canonical native form. Eg. "blah" converted to
4183 "libblah.so" or "blah.dll" etc.
4186 *) New function ERR_error_string_n(e, buf, len) which is like
4187 ERR_error_string(e, buf), but writes at most 'len' bytes
4188 including the 0 terminator. For ERR_error_string_n, 'buf'
4190 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
4192 *) CONF library reworked to become more general. A new CONF
4193 configuration file reader "class" is implemented as well as a
4194 new functions (NCONF_*, for "New CONF") to handle it. The now
4195 old CONF_* functions are still there, but are reimplemented to
4196 work in terms of the new functions. Also, a set of functions
4197 to handle the internal storage of the configuration data is
4198 provided to make it easier to write new configuration file
4199 reader "classes" (I can definitely see something reading a
4200 configuration file in XML format, for example), called _CONF_*,
4201 or "the configuration storage API"...
4203 The new configuration file reading functions are:
4205 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
4206 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
4208 NCONF_default, NCONF_WIN32
4210 NCONF_dump_fp, NCONF_dump_bio
4212 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
4213 NCONF_new creates a new CONF object. This works in the same way
4214 as other interfaces in OpenSSL, like the BIO interface.
4215 NCONF_dump_* dump the internal storage of the configuration file,
4216 which is useful for debugging. All other functions take the same
4217 arguments as the old CONF_* functions wth the exception of the
4218 first that must be a `CONF *' instead of a `LHASH *'.
4220 To make it easer to use the new classes with the old CONF_* functions,
4221 the function CONF_set_default_method is provided.
4224 *) Add '-tls1' option to 'openssl ciphers', which was already
4225 mentioned in the documentation but had not been implemented.
4226 (This option is not yet really useful because even the additional
4227 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
4230 *) Initial DSO code added into libcrypto for letting OpenSSL (and
4231 OpenSSL-based applications) load shared libraries and bind to
4232 them in a portable way.
4233 [Geoff Thorpe, with contributions from Richard Levitte]
4235 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
4237 *) Make sure _lrotl and _lrotr are only used with MSVC.
4239 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
4240 (the default implementation of RAND_status).
4242 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
4243 to '-clrext' (= clear extensions), as intended and documented.
4244 [Bodo Moeller; inconsistency pointed out by Michael Attili
4247 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
4248 was larger than the MD block size.
4249 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
4251 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
4252 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
4253 using the passed key: if the passed key was a private key the result
4254 of X509_print(), for example, would be to print out all the private key
4258 *) des_quad_cksum() byte order bug fix.
4259 [Ulf Möller, using the problem description in krb4-0.9.7, where
4260 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
4262 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
4264 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
4266 *) For easily testing in shell scripts whether some command
4267 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
4268 returns with exit code 0 iff no command of the given name is available.
4269 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
4270 the output goes to stdout and nothing is printed to stderr.
4271 Additional arguments are always ignored.
4273 Since for each cipher there is a command of the same name,
4274 the 'no-cipher' compilation switches can be tested this way.
4276 ('openssl no-XXX' is not able to detect pseudo-commands such
4277 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
4280 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
4283 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
4284 is set; it will be thrown away anyway because each handshake creates
4286 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
4287 to parameters -- in previous versions (since OpenSSL 0.9.3) the
4288 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
4289 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
4292 *) New s_client option -ign_eof: EOF at stdin is ignored, and
4293 'Q' and 'R' lose their special meanings (quit/renegotiate).
4294 This is part of what -quiet does; unlike -quiet, -ign_eof
4295 does not suppress any output.
4298 *) Add compatibility options to the purpose and trust code. The
4299 purpose X509_PURPOSE_ANY is "any purpose" which automatically
4300 accepts a certificate or CA, this was the previous behaviour,
4301 with all the associated security issues.
4303 X509_TRUST_COMPAT is the old trust behaviour: only and
4304 automatically trust self signed roots in certificate store. A
4305 new trust setting X509_TRUST_DEFAULT is used to specify that
4306 a purpose has no associated trust setting and it should instead
4307 use the value in the default purpose.
4310 *) Fix the PKCS#8 DSA private key code so it decodes keys again
4311 and fix a memory leak.
4314 *) In util/mkerr.pl (which implements 'make errors'), preserve
4315 reason strings from the previous version of the .c file, as
4316 the default to have only downcase letters (and digits) in
4317 automatically generated reasons codes is not always appropriate.
4320 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
4321 using strerror. Previously, ERR_reason_error_string() returned
4322 library names as reason strings for SYSerr; but SYSerr is a special
4323 case where small numbers are errno values, not library numbers.
4326 *) Add '-dsaparam' option to 'openssl dhparam' application. This
4327 converts DSA parameters into DH parameters. (When creating parameters,
4328 DSA_generate_parameters is used.)
4331 *) Include 'length' (recommended exponent length) in C code generated
4332 by 'openssl dhparam -C'.
4335 *) The second argument to set_label in perlasm was already being used
4336 so couldn't be used as a "file scope" flag. Moved to third argument
4340 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
4341 instead of RAND_bytes for encryption IVs and salts.
4344 *) Include RAND_status() into RAND_METHOD instead of implementing
4345 it only for md_rand.c Otherwise replacing the PRNG by calling
4346 RAND_set_rand_method would be impossible.
4349 *) Don't let DSA_generate_key() enter an infinite loop if the random
4350 number generation fails.
4353 *) New 'rand' application for creating pseudo-random output.
4356 *) Added configuration support for Linux/IA64
4357 [Rolf Haberrecker <rolf@suse.de>]
4359 *) Assembler module support for Mingw32.
4362 *) Shared library support for HPUX (in shlib/).
4363 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
4365 *) Shared library support for Solaris gcc.
4366 [Lutz Behnke <behnke@trustcenter.de>]
4368 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
4370 *) PKCS7_encrypt() was adding text MIME headers twice because they
4371 were added manually and by SMIME_crlf_copy().
4374 *) In bntest.c don't call BN_rand with zero bits argument.
4375 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
4377 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
4378 case was implemented. This caused BN_div_recp() to fail occasionally.
4381 *) Add an optional second argument to the set_label() in the perl
4382 assembly language builder. If this argument exists and is set
4383 to 1 it signals that the assembler should use a symbol whose
4384 scope is the entire file, not just the current function. This
4385 is needed with MASM which uses the format label:: for this scope.
4386 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
4388 *) Change the ASN1 types so they are typedefs by default. Before
4389 almost all types were #define'd to ASN1_STRING which was causing
4390 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
4394 *) Change names of new functions to the new get1/get0 naming
4395 convention: After 'get1', the caller owns a reference count
4396 and has to call ..._free; 'get0' returns a pointer to some
4397 data structure without incrementing reference counters.
4398 (Some of the existing 'get' functions increment a reference
4399 counter, some don't.)
4400 Similarly, 'set1' and 'add1' functions increase reference
4401 counters or duplicate objects.
4404 *) Allow for the possibility of temp RSA key generation failure:
4405 the code used to assume it always worked and crashed on failure.
4408 *) Fix potential buffer overrun problem in BIO_printf().
4409 [Ulf Möller, using public domain code by Patrick Powell; problem
4410 pointed out by David Sacerdote <das33@cornell.edu>]
4412 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
4413 RAND_egd() and RAND_status(). In the command line application,
4414 the EGD socket can be specified like a seed file using RANDFILE
4418 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
4419 Some CAs (e.g. Verisign) distribute certificates in this form.
4422 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
4423 list to exclude them. This means that no special compilation option
4424 is needed to use anonymous DH: it just needs to be included in the
4428 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
4429 EVP_MD_type. The old functionality is available in a new macro called
4430 EVP_MD_md(). Change code that uses it and update docs.
4433 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
4434 where the 'void *' argument is replaced by a function pointer argument.
4435 Previously 'void *' was abused to point to functions, which works on
4436 many platforms, but is not correct. As these functions are usually
4437 called by macros defined in OpenSSL header files, most source code
4438 should work without changes.
4441 *) <openssl/opensslconf.h> (which is created by Configure) now contains
4442 sections with information on -D... compiler switches used for
4443 compiling the library so that applications can see them. To enable
4444 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
4445 must be defined. E.g.,
4446 #define OPENSSL_ALGORITHM_DEFINES
4447 #include <openssl/opensslconf.h>
4448 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
4449 [Richard Levitte, Ulf and Bodo Möller]
4451 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
4455 *) Change the 'other' type in certificate aux info to a STACK_OF
4456 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
4457 the required ASN1 format: arbitrary types determined by an OID.
4460 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
4461 argument to 'req'. This is not because the function is newer or
4462 better than others it just uses the work 'NEW' in the certificate
4463 request header lines. Some software needs this.
4466 *) Reorganise password command line arguments: now passwords can be
4467 obtained from various sources. Delete the PEM_cb function and make
4468 it the default behaviour: i.e. if the callback is NULL and the
4469 usrdata argument is not NULL interpret it as a null terminated pass
4470 phrase. If usrdata and the callback are NULL then the pass phrase
4471 is prompted for as usual.
4474 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
4475 the support is automatically enabled. The resulting binaries will
4476 autodetect the card and use it if present.
4477 [Ben Laurie and Compaq Inc.]
4479 *) Work around for Netscape hang bug. This sends certificate request
4480 and server done in one record. Since this is perfectly legal in the
4481 SSL/TLS protocol it isn't a "bug" option and is on by default. See
4482 the bugs/SSLv3 entry for more info.
4485 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
4488 *) Add -rand argument to smime and pkcs12 applications and read/write
4492 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
4495 *) Add command line password options to the remaining applications.
4498 *) Bug fix for BN_div_recp() for numerators with an even number of
4502 *) More tests in bntest.c, and changed test_bn output.
4505 *) ./config recognizes MacOS X now.
4508 *) Bug fix for BN_div() when the first words of num and divsor are
4509 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
4512 *) Add support for various broken PKCS#8 formats, and command line
4513 options to produce them.
4516 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
4517 get temporary BIGNUMs from a BN_CTX.
4520 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
4524 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
4525 include a #define from the old name to the new. The original intent
4526 was that statically linked binaries could for example just call
4527 SSLeay_add_all_ciphers() to just add ciphers to the table and not
4528 link with digests. This never worked becayse SSLeay_add_all_digests()
4529 and SSLeay_add_all_ciphers() were in the same source file so calling
4530 one would link with the other. They are now in separate source files.
4533 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
4536 *) Use a less unusual form of the Miller-Rabin primality test (it used
4537 a binary algorithm for exponentiation integrated into the Miller-Rabin
4538 loop, our standard modexp algorithms are faster).
4541 *) Support for the EBCDIC character set completed.
4542 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
4544 *) Source code cleanups: use const where appropriate, eliminate casts,
4545 use void * instead of char * in lhash.
4548 *) Bugfix: ssl3_send_server_key_exchange was not restartable
4549 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
4550 this the server could overwrite ephemeral keys that the client
4554 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
4555 using 50 iterations of the Rabin-Miller test.
4557 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
4558 iterations of the Rabin-Miller test as required by the appendix
4559 to FIPS PUB 186[-1]) instead of DSA_is_prime.
4560 As BN_is_prime_fasttest includes trial division, DSA parameter
4561 generation becomes much faster.
4563 This implies a change for the callback functions in DSA_is_prime
4564 and DSA_generate_parameters: The callback function is called once
4565 for each positive witness in the Rabin-Miller test, not just
4566 occasionally in the inner loop; and the parameters to the
4567 callback function now provide an iteration count for the outer
4568 loop rather than for the current invocation of the inner loop.
4569 DSA_generate_parameters additionally can call the callback
4570 function with an 'iteration count' of -1, meaning that a
4571 candidate has passed the trial division test (when q is generated
4572 from an application-provided seed, trial division is skipped).
4575 *) New function BN_is_prime_fasttest that optionally does trial
4576 division before starting the Rabin-Miller test and has
4577 an additional BN_CTX * argument (whereas BN_is_prime always
4578 has to allocate at least one BN_CTX).
4579 'callback(1, -1, cb_arg)' is called when a number has passed the
4580 trial division stage.
4583 *) Fix for bug in CRL encoding. The validity dates weren't being handled
4587 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
4590 *) New function BN_pseudo_rand().
4593 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
4594 bignum version of BN_from_montgomery() with the working code from
4595 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
4599 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
4600 made it impossible to use the same SSL_SESSION data structure in
4601 SSL2 clients in multiple threads.
4604 *) The return value of RAND_load_file() no longer counts bytes obtained
4605 by stat(). RAND_load_file(..., -1) is new and uses the complete file
4606 to seed the PRNG (previously an explicit byte count was required).
4607 [Ulf Möller, Bodo Möller]
4609 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
4610 used (char *) instead of (void *) and had casts all over the place.
4613 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
4616 *) Retain source code compatibility for BN_prime_checks macro:
4617 BN_is_prime(..., BN_prime_checks, ...) now uses
4618 BN_prime_checks_for_size to determine the appropriate number of
4619 Rabin-Miller iterations.
4622 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
4623 DH_CHECK_P_NOT_SAFE_PRIME.
4624 (Check if this is true? OpenPGP calls them "strong".)
4627 *) Merge the functionality of "dh" and "gendh" programs into a new program
4628 "dhparam". The old programs are retained for now but will handle DH keys
4629 (instead of parameters) in future.
4632 *) Make the ciphers, s_server and s_client programs check the return values
4633 when a new cipher list is set.
4636 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
4637 ciphers. Before when the 56bit ciphers were enabled the sorting was
4640 The syntax for the cipher sorting has been extended to support sorting by
4641 cipher-strength (using the strength_bits hard coded in the tables).
4642 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
4644 Fix a bug in the cipher-command parser: when supplying a cipher command
4645 string with an "undefined" symbol (neither command nor alphanumeric
4646 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
4647 an error is flagged.
4649 Due to the strength-sorting extension, the code of the
4650 ssl_create_cipher_list() function was completely rearranged. I hope that
4651 the readability was also increased :-)
4652 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
4654 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
4655 for the first serial number and places 2 in the serial number file. This
4656 avoids problems when the root CA is created with serial number zero and
4657 the first user certificate has the same issuer name and serial number
4661 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
4662 the new code. Add documentation for this stuff.
4665 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
4666 X509_*() to X509at_*() on the grounds that they don't handle X509
4667 structures and behave in an analagous way to the X509v3 functions:
4668 they shouldn't be called directly but wrapper functions should be used
4671 So we also now have some wrapper functions that call the X509at functions
4672 when passed certificate requests. (TO DO: similar things can be done with
4673 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
4674 things. Some of these need some d2i or i2d and print functionality
4675 because they handle more complex structures.)
4678 *) Add missing #ifndefs that caused missing symbols when building libssl
4679 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
4680 NO_RSA in ssl/s2*.c.
4681 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
4683 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
4684 has a return value which indicates the quality of the random data
4685 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
4686 error queue. New function RAND_pseudo_bytes() generates output that is
4687 guaranteed to be unique but not unpredictable. RAND_add is like
4688 RAND_seed, but takes an extra argument for an entropy estimate
4689 (RAND_seed always assumes full entropy).
4692 *) Do more iterations of Rabin-Miller probable prime test (specifically,
4693 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
4694 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
4695 in crypto/bn/bn_prime.c for the complete table). This guarantees a
4696 false-positive rate of at most 2^-80 for random input.
4699 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
4702 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
4703 in the 0.9.5 release), this returns the chain
4704 from an X509_CTX structure with a dup of the stack and all
4705 the X509 reference counts upped: so the stack will exist
4706 after X509_CTX_cleanup() has been called. Modify pkcs12.c
4709 Also make SSL_SESSION_print() print out the verify return
4713 *) Add manpage for the pkcs12 command. Also change the default
4714 behaviour so MAC iteration counts are used unless the new
4715 -nomaciter option is used. This improves file security and
4716 only older versions of MSIE (4.0 for example) need it.
4719 *) Honor the no-xxx Configure options when creating .DEF files.
4722 *) Add PKCS#10 attributes to field table: challengePassword,
4723 unstructuredName and unstructuredAddress. These are taken from
4724 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
4725 international characters are used.
4727 More changes to X509_ATTRIBUTE code: allow the setting of types
4728 based on strings. Remove the 'loc' parameter when adding
4729 attributes because these will be a SET OF encoding which is sorted
4733 *) Initial changes to the 'req' utility to allow request generation
4734 automation. This will allow an application to just generate a template
4735 file containing all the field values and have req construct the
4738 Initial support for X509_ATTRIBUTE handling. Stacks of these are
4739 used all over the place including certificate requests and PKCS#7
4740 structures. They are currently handled manually where necessary with
4741 some primitive wrappers for PKCS#7. The new functions behave in a
4742 manner analogous to the X509 extension functions: they allow
4743 attributes to be looked up by NID and added.
4745 Later something similar to the X509V3 code would be desirable to
4746 automatically handle the encoding, decoding and printing of the
4747 more complex types. The string types like challengePassword can
4748 be handled by the string table functions.
4750 Also modified the multi byte string table handling. Now there is
4751 a 'global mask' which masks out certain types. The table itself
4752 can use the flag STABLE_NO_MASK to ignore the mask setting: this
4753 is useful when for example there is only one permissible type
4754 (as in countryName) and using the mask might result in no valid
4758 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
4759 SSL_get_peer_finished to allow applications to obtain the latest
4760 Finished messages sent to the peer or expected from the peer,
4761 respectively. (SSL_get_peer_finished is usually the Finished message
4762 actually received from the peer, otherwise the protocol will be aborted.)
4764 As the Finished message are message digests of the complete handshake
4765 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
4766 be used for external authentication procedures when the authentication
4767 provided by SSL/TLS is not desired or is not enough.
4770 *) Enhanced support for Alpha Linux is added. Now ./config checks if
4771 the host supports BWX extension and if Compaq C is present on the
4772 $PATH. Just exploiting of the BWX extension results in 20-30%
4773 performance kick for some algorithms, e.g. DES and RC4 to mention
4774 a couple. Compaq C in turn generates ~20% faster code for MD5 and
4778 *) Add support for MS "fast SGC". This is arguably a violation of the
4779 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
4780 weak crypto and after checking the certificate is SGC a second one
4781 with strong crypto. MS SGC stops the first handshake after receiving
4782 the server certificate message and sends a second client hello. Since
4783 a server will typically do all the time consuming operations before
4784 expecting any further messages from the client (server key exchange
4785 is the most expensive) there is little difference between the two.
4787 To get OpenSSL to support MS SGC we have to permit a second client
4788 hello message after we have sent server done. In addition we have to
4789 reset the MAC if we do get this second client hello.
4792 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
4793 if a DER encoded private key is RSA or DSA traditional format. Changed
4794 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
4795 format DER encoded private key. Newer code should use PKCS#8 format which
4796 has the key type encoded in the ASN1 structure. Added DER private key
4797 support to pkcs8 application.
4800 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
4801 ciphersuites has been selected (as required by the SSL 3/TLS 1
4802 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
4803 is set, we interpret this as a request to violate the specification
4804 (the worst that can happen is a handshake failure, and 'correct'
4805 behaviour would result in a handshake failure anyway).
4808 *) In SSL_CTX_add_session, take into account that there might be multiple
4809 SSL_SESSION structures with the same session ID (e.g. when two threads
4810 concurrently obtain them from an external cache).
4811 The internal cache can handle only one SSL_SESSION with a given ID,
4812 so if there's a conflict, we now throw out the old one to achieve
4816 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
4817 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
4818 some routines that use cipher OIDs: some ciphers do not have OIDs
4819 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
4823 *) Simplify the trust setting structure and code. Now we just have
4824 two sequences of OIDs for trusted and rejected settings. These will
4825 typically have values the same as the extended key usage extension
4826 and any application specific purposes.
4828 The trust checking code now has a default behaviour: it will just
4829 check for an object with the same NID as the passed id. Functions can
4830 be provided to override either the default behaviour or the behaviour
4831 for a given id. SSL client, server and email already have functions
4832 in place for compatibility: they check the NID and also return "trusted"
4833 if the certificate is self signed.
4836 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
4837 traditional format into an EVP_PKEY structure.
4840 *) Add a password callback function PEM_cb() which either prompts for
4841 a password if usr_data is NULL or otherwise assumes it is a null
4842 terminated password. Allow passwords to be passed on command line
4843 environment or config files in a few more utilities.
4846 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
4847 keys. Add some short names for PKCS#8 PBE algorithms and allow them
4848 to be specified on the command line for the pkcs8 and pkcs12 utilities.
4849 Update documentation.
4852 *) Support for ASN1 "NULL" type. This could be handled before by using
4853 ASN1_TYPE but there wasn't any function that would try to read a NULL
4854 and produce an error if it couldn't. For compatibility we also have
4855 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
4856 don't allocate anything because they don't need to.
4859 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
4861 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
4863 *) Rebuild of the memory allocation routines used by OpenSSL code and
4864 possibly others as well. The purpose is to make an interface that
4865 provide hooks so anyone can build a separate set of allocation and
4866 deallocation routines to be used by OpenSSL, for example memory
4867 pool implementations, or something else, which was previously hard
4868 since Malloc(), Realloc() and Free() were defined as macros having
4869 the values malloc, realloc and free, respectively (except for Win32
4870 compilations). The same is provided for memory debugging code.
4871 OpenSSL already comes with functionality to find memory leaks, but
4872 this gives people a chance to debug other memory problems.
4874 With these changes, a new set of functions and macros have appeared:
4876 CRYPTO_set_mem_debug_functions() [F]
4877 CRYPTO_get_mem_debug_functions() [F]
4878 CRYPTO_dbg_set_options() [F]
4879 CRYPTO_dbg_get_options() [F]
4880 CRYPTO_malloc_debug_init() [M]
4882 The memory debug functions are NULL by default, unless the library
4883 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
4884 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
4885 gives the standard debugging functions that come with OpenSSL) or
4886 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
4887 provided by the library user) must be used. When the standard
4888 debugging functions are used, CRYPTO_dbg_set_options can be used to
4889 request additional information:
4890 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
4891 the CRYPTO_MDEBUG_xxx macro when compiling the library.
4893 Also, things like CRYPTO_set_mem_functions will always give the
4894 expected result (the new set of functions is used for allocation
4895 and deallocation) at all times, regardless of platform and compiler
4898 To finish it up, some functions that were never use in any other
4899 way than through macros have a new API and new semantic:
4902 CRYPTO_dbg_realloc()
4905 All macros of value have retained their old syntax.
4906 [Richard Levitte and Bodo Moeller]
4908 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
4909 ordering of SMIMECapabilities wasn't in "strength order" and there
4910 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
4914 *) Some ASN1 types with illegal zero length encoding (INTEGER,
4915 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
4916 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
4918 *) Merge in my S/MIME library for OpenSSL. This provides a simple
4919 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
4920 functionality to handle multipart/signed properly) and a utility
4921 called 'smime' to call all this stuff. This is based on code I
4922 originally wrote for Celo who have kindly allowed it to be
4923 included in OpenSSL.
4926 *) Add variants des_set_key_checked and des_set_key_unchecked of
4927 des_set_key (aka des_key_sched). Global variable des_check_key
4928 decides which of these is called by des_set_key; this way
4929 des_check_key behaves as it always did, but applications and
4930 the library itself, which was buggy for des_check_key == 1,
4931 have a cleaner way to pick the version they need.
4934 *) New function PKCS12_newpass() which changes the password of a
4938 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
4939 dynamic mix. In both cases the ids can be used as an index into the
4940 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
4941 functions so they accept a list of the field values and the
4942 application doesn't need to directly manipulate the X509_TRUST
4946 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
4950 *) Modify the way the V3 extension code looks up extensions. This now
4951 works in a similar way to the object code: we have some "standard"
4952 extensions in a static table which is searched with OBJ_bsearch()
4953 and the application can add dynamic ones if needed. The file
4954 crypto/x509v3/ext_dat.h now has the info: this file needs to be
4955 updated whenever a new extension is added to the core code and kept
4956 in ext_nid order. There is a simple program 'tabtest.c' which checks
4957 this. New extensions are not added too often so this file can readily
4958 be maintained manually.
4960 There are two big advantages in doing things this way. The extensions
4961 can be looked up immediately and no longer need to be "added" using
4962 X509V3_add_standard_extensions(): this function now does nothing.
4963 [Side note: I get *lots* of email saying the extension code doesn't
4964 work because people forget to call this function]
4965 Also no dynamic allocation is done unless new extensions are added:
4966 so if we don't add custom extensions there is no need to call
4967 X509V3_EXT_cleanup().
4970 *) Modify enc utility's salting as follows: make salting the default. Add a
4971 magic header, so unsalted files fail gracefully instead of just decrypting
4972 to garbage. This is because not salting is a big security hole, so people
4973 should be discouraged from doing it.
4976 *) Fixes and enhancements to the 'x509' utility. It allowed a message
4977 digest to be passed on the command line but it only used this
4978 parameter when signing a certificate. Modified so all relevant
4979 operations are affected by the digest parameter including the
4980 -fingerprint and -x509toreq options. Also -x509toreq choked if a
4981 DSA key was used because it didn't fix the digest.
4984 *) Initial certificate chain verify code. Currently tests the untrusted
4985 certificates for consistency with the verify purpose (which is set
4986 when the X509_STORE_CTX structure is set up) and checks the pathlength.
4988 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
4989 this is because it will reject chains with invalid extensions whereas
4990 every previous version of OpenSSL and SSLeay made no checks at all.
4992 Trust code: checks the root CA for the relevant trust settings. Trust
4993 settings have an initial value consistent with the verify purpose: e.g.
4994 if the verify purpose is for SSL client use it expects the CA to be
4995 trusted for SSL client use. However the default value can be changed to
4996 permit custom trust settings: one example of this would be to only trust
4997 certificates from a specific "secure" set of CAs.
4999 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
5000 which should be used for version portability: especially since the
5001 verify structure is likely to change more often now.
5003 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
5004 to set them. If not set then assume SSL clients will verify SSL servers
5007 Two new options to the verify program: -untrusted allows a set of
5008 untrusted certificates to be passed in and -purpose which sets the
5009 intended purpose of the certificate. If a purpose is set then the
5010 new chain verify code is used to check extension consistency.
5013 *) Support for the authority information access extension.
5016 *) Modify RSA and DSA PEM read routines to transparently handle
5017 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
5018 public keys in a format compatible with certificate
5019 SubjectPublicKeyInfo structures. Unfortunately there were already
5020 functions called *_PublicKey_* which used various odd formats so
5021 these are retained for compatibility: however the DSA variants were
5022 never in a public release so they have been deleted. Changed dsa/rsa
5023 utilities to handle the new format: note no releases ever handled public
5024 keys so we should be OK.
5026 The primary motivation for this change is to avoid the same fiasco
5027 that dogs private keys: there are several incompatible private key
5028 formats some of which are standard and some OpenSSL specific and
5029 require various evil hacks to allow partial transparent handling and
5030 even then it doesn't work with DER formats. Given the option anything
5031 other than PKCS#8 should be dumped: but the other formats have to
5032 stay in the name of compatibility.
5034 With public keys and the benefit of hindsight one standard format
5035 is used which works with EVP_PKEY, RSA or DSA structures: though
5036 it clearly returns an error if you try to read the wrong kind of key.
5038 Added a -pubkey option to the 'x509' utility to output the public key.
5039 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
5040 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
5041 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
5042 that do the same as the EVP_PKEY_assign_*() except they up the
5043 reference count of the added key (they don't "swallow" the
5047 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
5048 CRLs would fail if the file contained no certificates or no CRLs:
5049 added a new function to read in both types and return the number
5050 read: this means that if none are read it will be an error. The
5051 DER versions of the certificate and CRL reader would always fail
5052 because it isn't possible to mix certificates and CRLs in DER format
5053 without choking one or the other routine. Changed this to just read
5054 a certificate: this is the best we can do. Also modified the code
5055 in apps/verify.c to take notice of return codes: it was previously
5056 attempting to read in certificates from NULL pointers and ignoring
5057 any errors: this is one reason why the cert and CRL reader seemed
5058 to work. It doesn't check return codes from the default certificate
5059 routines: these may well fail if the certificates aren't installed.
5062 *) Code to support otherName option in GeneralName.
5065 *) First update to verify code. Change the verify utility
5066 so it warns if it is passed a self signed certificate:
5067 for consistency with the normal behaviour. X509_verify
5068 has been modified to it will now verify a self signed
5069 certificate if *exactly* the same certificate appears
5070 in the store: it was previously impossible to trust a
5071 single self signed certificate. This means that:
5072 openssl verify ss.pem
5073 now gives a warning about a self signed certificate but
5074 openssl verify -CAfile ss.pem ss.pem
5078 *) For servers, store verify_result in SSL_SESSION data structure
5079 (and add it to external session representation).
5080 This is needed when client certificate verifications fails,
5081 but an application-provided verification callback (set by
5082 SSL_CTX_set_cert_verify_callback) allows accepting the session
5083 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
5084 but returns 1): When the session is reused, we have to set
5085 ssl->verify_result to the appropriate error code to avoid
5087 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
5089 *) Fix a bug in the new PKCS#7 code: it didn't consider the
5090 case in PKCS7_dataInit() where the signed PKCS7 structure
5091 didn't contain any existing data because it was being created.
5092 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
5094 *) Add a salt to the key derivation routines in enc.c. This
5095 forms the first 8 bytes of the encrypted file. Also add a
5096 -S option to allow a salt to be input on the command line.
5099 *) New function X509_cmp(). Oddly enough there wasn't a function
5100 to compare two certificates. We do this by working out the SHA1
5101 hash and comparing that. X509_cmp() will be needed by the trust
5105 *) SSL_get1_session() is like SSL_get_session(), but increments
5106 the reference count in the SSL_SESSION returned.
5107 [Geoff Thorpe <geoff@eu.c2.net>]
5109 *) Fix for 'req': it was adding a null to request attributes.
5110 Also change the X509_LOOKUP and X509_INFO code to handle
5111 certificate auxiliary information.
5114 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
5118 *) Add the possibility to add extra information to the memory leak
5119 detecting output, to form tracebacks, showing from where each
5120 allocation was originated: CRYPTO_push_info("constant string") adds
5121 the string plus current file name and line number to a per-thread
5122 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
5123 is like calling CYRPTO_pop_info() until the stack is empty.
5124 Also updated memory leak detection code to be multi-thread-safe.
5127 *) Add options -text and -noout to pkcs7 utility and delete the
5128 encryption options which never did anything. Update docs.
5131 *) Add options to some of the utilities to allow the pass phrase
5132 to be included on either the command line (not recommended on
5133 OSes like Unix) or read from the environment. Update the
5134 manpages and fix a few bugs.
5137 *) Add a few manpages for some of the openssl commands.
5140 *) Fix the -revoke option in ca. It was freeing up memory twice,
5141 leaking and not finding already revoked certificates.
5144 *) Extensive changes to support certificate auxiliary information.
5145 This involves the use of X509_CERT_AUX structure and X509_AUX
5146 functions. An X509_AUX function such as PEM_read_X509_AUX()
5147 can still read in a certificate file in the usual way but it
5148 will also read in any additional "auxiliary information". By
5149 doing things this way a fair degree of compatibility can be
5150 retained: existing certificates can have this information added
5151 using the new 'x509' options.
5153 Current auxiliary information includes an "alias" and some trust
5154 settings. The trust settings will ultimately be used in enhanced
5155 certificate chain verification routines: currently a certificate
5156 can only be trusted if it is self signed and then it is trusted
5160 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
5161 The problem was that one of the replacement routines had not been working
5162 since SSLeay releases. For now the offending routine has been replaced
5163 with non-optimised assembler. Even so, this now gives around 95%
5164 performance improvement for 1024 bit RSA signs.
5167 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
5168 handling. Most clients have the effective key size in bits equal to
5169 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
5170 A few however don't do this and instead use the size of the decrypted key
5171 to determine the RC2 key length and the AlgorithmIdentifier to determine
5172 the effective key length. In this case the effective key length can still
5173 be 40 bits but the key length can be 168 bits for example. This is fixed
5174 by manually forcing an RC2 key into the EVP_PKEY structure because the
5175 EVP code can't currently handle unusual RC2 key sizes: it always assumes
5176 the key length and effective key length are equal.
5179 *) Add a bunch of functions that should simplify the creation of
5180 X509_NAME structures. Now you should be able to do:
5181 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
5182 and have it automatically work out the correct field type and fill in
5183 the structures. The more adventurous can try:
5184 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
5185 and it will (hopefully) work out the correct multibyte encoding.
5188 *) Change the 'req' utility to use the new field handling and multibyte
5189 copy routines. Before the DN field creation was handled in an ad hoc
5190 way in req, ca, and x509 which was rather broken and didn't support
5191 BMPStrings or UTF8Strings. Since some software doesn't implement
5192 BMPStrings or UTF8Strings yet, they can be enabled using the config file
5193 using the dirstring_type option. See the new comment in the default
5194 openssl.cnf for more info.
5197 *) Make crypto/rand/md_rand.c more robust:
5198 - Assure unique random numbers after fork().
5199 - Make sure that concurrent threads access the global counter and
5200 md serializably so that we never lose entropy in them
5201 or use exactly the same state in multiple threads.
5202 Access to the large state is not always serializable because
5203 the additional locking could be a performance killer, and
5204 md should be large enough anyway.
5207 *) New file apps/app_rand.c with commonly needed functionality
5208 for handling the random seed file.
5210 Use the random seed file in some applications that previously did not:
5212 dsaparam -genkey (which also ignored its '-rand' option),
5215 x509 (when signing).
5216 Except on systems with /dev/urandom, it is crucial to have a random
5217 seed file at least for key creation, DSA signing, and for DH exchanges;
5218 for RSA signatures we could do without one.
5220 gendh and gendsa (unlike genrsa) used to read only the first byte
5221 of each file listed in the '-rand' option. The function as previously
5222 found in genrsa is now in app_rand.c and is used by all programs
5223 that support '-rand'.
5226 *) In RAND_write_file, use mode 0600 for creating files;
5227 don't just chmod when it may be too late.
5230 *) Report an error from X509_STORE_load_locations
5231 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
5234 *) New function ASN1_mbstring_copy() this copies a string in either
5235 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
5236 into an ASN1_STRING type. A mask of permissible types is passed
5237 and it chooses the "minimal" type to use or an error if not type
5241 *) Add function equivalents to the various macros in asn1.h. The old
5242 macros are retained with an M_ prefix. Code inside the library can
5243 use the M_ macros. External code (including the openssl utility)
5244 should *NOT* in order to be "shared library friendly".
5247 *) Add various functions that can check a certificate's extensions
5248 to see if it usable for various purposes such as SSL client,
5249 server or S/MIME and CAs of these types. This is currently
5250 VERY EXPERIMENTAL but will ultimately be used for certificate chain
5251 verification. Also added a -purpose flag to x509 utility to
5252 print out all the purposes.
5255 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
5259 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
5260 for, obtain and decode and extension and obtain its critical flag.
5261 This allows all the necessary extension code to be handled in a
5262 single function call.
5265 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
5266 platforms. See crypto/rc4/rc4_enc.c for further details.
5269 *) New -noout option to asn1parse. This causes no output to be produced
5270 its main use is when combined with -strparse and -out to extract data
5271 from a file (which may not be in ASN.1 format).
5274 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
5275 when producing the local key id.
5276 [Richard Levitte <levitte@stacken.kth.se>]
5278 *) New option -dhparam in s_server. This allows a DH parameter file to be
5279 stated explicitly. If it is not stated then it tries the first server
5280 certificate file. The previous behaviour hard coded the filename
5284 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
5285 a public key to be input or output. For example:
5286 openssl rsa -in key.pem -pubout -out pubkey.pem
5287 Also added necessary DSA public key functions to handle this.
5290 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
5291 in the message. This was handled by allowing
5292 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
5293 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
5295 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
5296 to the end of the strings whereas this didn't. This would cause problems
5297 if strings read with d2i_ASN1_bytes() were later modified.
5298 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
5300 *) Fix for base64 decode bug. When a base64 bio reads only one line of
5301 data and it contains EOF it will end up returning an error. This is
5302 caused by input 46 bytes long. The cause is due to the way base64
5303 BIOs find the start of base64 encoded data. They do this by trying a
5304 trial decode on each line until they find one that works. When they
5305 do a flag is set and it starts again knowing it can pass all the
5306 data directly through the decoder. Unfortunately it doesn't reset
5307 the context it uses. This means that if EOF is reached an attempt
5308 is made to pass two EOFs through the context and this causes the
5309 resulting error. This can also cause other problems as well. As is
5310 usual with these problems it takes *ages* to find and the fix is
5311 trivial: move one line.
5312 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
5314 *) Ugly workaround to get s_client and s_server working under Windows. The
5315 old code wouldn't work because it needed to select() on sockets and the
5316 tty (for keypresses and to see if data could be written). Win32 only
5317 supports select() on sockets so we select() with a 1s timeout on the
5318 sockets and then see if any characters are waiting to be read, if none
5319 are present then we retry, we also assume we can always write data to
5320 the tty. This isn't nice because the code then blocks until we've
5321 received a complete line of data and it is effectively polling the
5322 keyboard at 1s intervals: however it's quite a bit better than not
5323 working at all :-) A dedicated Windows application might handle this
5324 with an event loop for example.
5327 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
5328 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
5329 will be called when RSA_sign() and RSA_verify() are used. This is useful
5330 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
5331 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
5332 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
5333 This necessitated the support of an extra signature type NID_md5_sha1
5334 for SSL signatures and modifications to the SSL library to use it instead
5335 of calling RSA_public_decrypt() and RSA_private_encrypt().
5338 *) Add new -verify -CAfile and -CApath options to the crl program, these
5339 will lookup a CRL issuers certificate and verify the signature in a
5340 similar way to the verify program. Tidy up the crl program so it
5341 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
5342 less strict. It will now permit CRL extensions even if it is not
5343 a V2 CRL: this will allow it to tolerate some broken CRLs.
5346 *) Initialize all non-automatic variables each time one of the openssl
5347 sub-programs is started (this is necessary as they may be started
5348 multiple times from the "OpenSSL>" prompt).
5349 [Lennart Bang, Bodo Moeller]
5351 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
5352 removing all other RSA functionality (this is what NO_RSA does). This
5353 is so (for example) those in the US can disable those operations covered
5354 by the RSA patent while allowing storage and parsing of RSA keys and RSA
5358 *) Non-copying interface to BIO pairs.
5359 (still largely untested)
5362 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
5363 ASCII string. This was handled independently in various places before.
5366 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
5367 UTF8 strings a character at a time.
5370 *) Use client_version from client hello to select the protocol
5371 (s23_srvr.c) and for RSA client key exchange verification
5372 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
5375 *) Add various utility functions to handle SPKACs, these were previously
5376 handled by poking round in the structure internals. Added new function
5377 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
5378 print, verify and generate SPKACs. Based on an original idea from
5379 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
5382 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
5385 *) Allow the config file extension section to be overwritten on the
5386 command line. Based on an original idea from Massimiliano Pala
5387 <madwolf@comune.modena.it>. The new option is called -extensions
5388 and can be applied to ca, req and x509. Also -reqexts to override
5389 the request extensions in req and -crlexts to override the crl extensions
5393 *) Add new feature to the SPKAC handling in ca. Now you can include
5394 the same field multiple times by preceding it by "XXXX." for example:
5397 this is the same syntax as used in the req config file.
5400 *) Allow certificate extensions to be added to certificate requests. These
5401 are specified in a 'req_extensions' option of the req section of the
5402 config file. They can be printed out with the -text option to req but
5403 are otherwise ignored at present.
5406 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
5407 data read consists of only the final block it would not decrypted because
5408 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
5409 A misplaced 'break' also meant the decrypted final block might not be
5410 copied until the next read.
5413 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
5414 a few extra parameters to the DH structure: these will be useful if
5415 for example we want the value of 'q' or implement X9.42 DH.
5418 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
5419 provides hooks that allow the default DSA functions or functions on a
5420 "per key" basis to be replaced. This allows hardware acceleration and
5421 hardware key storage to be handled without major modification to the
5422 library. Also added low level modexp hooks and CRYPTO_EX structure and
5423 associated functions.
5426 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
5427 as "read only": it can't be written to and the buffer it points to will
5428 not be freed. Reading from a read only BIO is much more efficient than
5429 a normal memory BIO. This was added because there are several times when
5430 an area of memory needs to be read from a BIO. The previous method was
5431 to create a memory BIO and write the data to it, this results in two
5432 copies of the data and an O(n^2) reading algorithm. There is a new
5433 function BIO_new_mem_buf() which creates a read only memory BIO from
5434 an area of memory. Also modified the PKCS#7 routines to use read only
5438 *) Bugfix: ssl23_get_client_hello did not work properly when called in
5439 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
5440 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
5441 but a retry condition occured while trying to read the rest.
5444 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
5445 NID_pkcs7_encrypted by default: this was wrong since this should almost
5446 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
5447 the encrypted data type: this is a more sensible place to put it and it
5448 allows the PKCS#12 code to be tidied up that duplicated this
5452 *) Changed obj_dat.pl script so it takes its input and output files on
5453 the command line. This should avoid shell escape redirection problems
5457 *) Initial support for certificate extension requests, these are included
5458 in things like Xenroll certificate requests. Included functions to allow
5459 extensions to be obtained and added.
5462 *) -crlf option to s_client and s_server for sending newlines as
5463 CRLF (as required by many protocols).
5466 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
5468 *) Install libRSAglue.a when OpenSSL is built with RSAref.
5469 [Ralf S. Engelschall]
5471 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
5472 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
5474 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
5478 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
5479 DH parameters/keys (q is lost during that conversion, but the resulting
5480 DH parameters contain its length).
5482 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
5483 much faster than DH_generate_parameters (which creates parameters
5484 where p = 2*q + 1), and also the smaller q makes DH computations
5485 much more efficient (160-bit exponentiation instead of 1024-bit
5486 exponentiation); so this provides a convenient way to support DHE
5487 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
5488 utter importance to use
5489 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
5491 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
5492 when such DH parameters are used, because otherwise small subgroup
5493 attacks may become possible!
5496 *) Avoid memory leak in i2d_DHparams.
5499 *) Allow the -k option to be used more than once in the enc program:
5500 this allows the same encrypted message to be read by multiple recipients.
5503 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
5504 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
5505 it will always use the numerical form of the OID, even if it has a short
5509 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
5510 method only got called if p,q,dmp1,dmq1,iqmp components were present,
5511 otherwise bn_mod_exp was called. In the case of hardware keys for example
5512 no private key components need be present and it might store extra data
5513 in the RSA structure, which cannot be accessed from bn_mod_exp.
5514 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
5515 private key operations.
5518 *) Added support for SPARC Linux.
5521 *) pem_password_cb function type incompatibly changed from
5522 typedef int pem_password_cb(char *buf, int size, int rwflag);
5524 ....(char *buf, int size, int rwflag, void *userdata);
5525 so that applications can pass data to their callbacks:
5526 The PEM[_ASN1]_{read,write}... functions and macros now take an
5527 additional void * argument, which is just handed through whenever
5528 the password callback is called.
5529 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
5531 New function SSL_CTX_set_default_passwd_cb_userdata.
5533 Compatibility note: As many C implementations push function arguments
5534 onto the stack in reverse order, the new library version is likely to
5535 interoperate with programs that have been compiled with the old
5536 pem_password_cb definition (PEM_whatever takes some data that
5537 happens to be on the stack as its last argument, and the callback
5538 just ignores this garbage); but there is no guarantee whatsoever that
5541 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
5542 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
5543 problems not only on Windows, but also on some Unix platforms.
5544 To avoid problematic command lines, these definitions are now in an
5545 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
5546 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
5549 *) MIPS III/IV assembler module is reimplemented.
5552 *) More DES library cleanups: remove references to srand/rand and
5553 delete an unused file.
5556 *) Add support for the the free Netwide assembler (NASM) under Win32,
5557 since not many people have MASM (ml) and it can be hard to obtain.
5558 This is currently experimental but it seems to work OK and pass all
5559 the tests. Check out INSTALL.W32 for info.
5562 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
5563 without temporary keys kept an extra copy of the server key,
5564 and connections with temporary keys did not free everything in case
5568 *) New function RSA_check_key and new openssl rsa option -check
5569 for verifying the consistency of RSA keys.
5570 [Ulf Moeller, Bodo Moeller]
5572 *) Various changes to make Win32 compile work:
5573 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
5574 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
5575 comparison" warnings.
5576 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
5579 *) Add a debugging option to PKCS#5 v2 key generation function: when
5580 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
5581 derived keys are printed to stderr.
5584 *) Copy the flags in ASN1_STRING_dup().
5585 [Roman E. Pavlov <pre@mo.msk.ru>]
5587 *) The x509 application mishandled signing requests containing DSA
5588 keys when the signing key was also DSA and the parameters didn't match.
5590 It was supposed to omit the parameters when they matched the signing key:
5591 the verifying software was then supposed to automatically use the CA's
5592 parameters if they were absent from the end user certificate.
5594 Omitting parameters is no longer recommended. The test was also
5595 the wrong way round! This was probably due to unusual behaviour in
5596 EVP_cmp_parameters() which returns 1 if the parameters match.
5597 This meant that parameters were omitted when they *didn't* match and
5598 the certificate was useless. Certificates signed with 'ca' didn't have
5600 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
5602 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
5603 The interface is as follows:
5604 Applications can use
5605 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
5606 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
5607 "off" is now the default.
5608 The library internally uses
5609 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
5610 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
5611 to disable memory-checking temporarily.
5613 Some inconsistent states that previously were possible (and were
5614 even the default) are now avoided.
5616 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
5617 with each memory chunk allocated; this is occasionally more helpful
5618 than just having a counter.
5620 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
5622 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
5626 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
5627 which largely parallels "options", but is for changing API behaviour,
5628 whereas "options" are about protocol behaviour.
5629 Initial "mode" flags are:
5631 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
5632 a single record has been written.
5633 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
5634 retries use the same buffer location.
5635 (But all of the contents must be
5639 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
5642 *) Fix problems with no-hmac etc.
5643 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
5645 *) New functions RSA_get_default_method(), RSA_set_method() and
5646 RSA_get_method(). These allows replacement of RSA_METHODs without having
5647 to mess around with the internals of an RSA structure.
5650 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
5651 Also really enable memory leak checks in openssl.c and in some
5653 [Chad C. Mulligan, Bodo Moeller]
5655 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
5656 up the length of negative integers. This has now been simplified to just
5657 store the length when it is first determined and use it later, rather
5658 than trying to keep track of where data is copied and updating it to
5660 [Steve Henson, reported by Brien Wheeler
5661 <bwheeler@authentica-security.com>]
5663 *) Add a new function PKCS7_signatureVerify. This allows the verification
5664 of a PKCS#7 signature but with the signing certificate passed to the
5665 function itself. This contrasts with PKCS7_dataVerify which assumes the
5666 certificate is present in the PKCS#7 structure. This isn't always the
5667 case: certificates can be omitted from a PKCS#7 structure and be
5668 distributed by "out of band" means (such as a certificate database).
5671 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
5672 function prototypes in pem.h, also change util/mkdef.pl to add the
5673 necessary function names.
5676 *) mk1mf.pl (used by Windows builds) did not properly read the
5677 options set by Configure in the top level Makefile, and Configure
5678 was not even able to write more than one option correctly.
5679 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
5682 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
5683 file to be loaded from a BIO or FILE pointer. The BIO version will
5684 for example allow memory BIOs to contain config info.
5687 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
5688 Whoever hopes to achieve shared-library compatibility across versions
5689 must use this, not the compile-time macro.
5690 (Exercise 0.9.4: Which is the minimum library version required by
5692 Note: All this applies only to multi-threaded programs, others don't
5696 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
5697 through a BIO pair triggered the default case, i.e.
5698 SSLerr(...,SSL_R_UNKNOWN_STATE).
5701 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
5702 can use the SSL library even if none of the specific BIOs is
5706 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
5707 for the encoded length.
5708 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
5710 *) Add initial documentation of the X509V3 functions.
5713 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
5714 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
5715 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
5716 secure PKCS#8 private key format with a high iteration count.
5719 *) Fix determination of Perl interpreter: A perl or perl5
5720 _directory_ in $PATH was also accepted as the interpreter.
5721 [Ralf S. Engelschall]
5723 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
5724 wrong with it but it was very old and did things like calling
5725 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
5729 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
5730 to use the new extension code.
5733 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
5734 with macros. This should make it easier to change their form, add extra
5735 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
5739 *) Add to configuration table a new entry that can specify an alternative
5740 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
5741 according to Mark Crispin <MRC@Panda.COM>.
5745 *) DES CBC did not update the IV. Weird.
5748 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
5749 Changing the behaviour of the former might break existing programs --
5750 where IV updating is needed, des_ncbc_encrypt can be used.
5753 *) When bntest is run from "make test" it drives bc to check its
5754 calculations, as well as internally checking them. If an internal check
5755 fails, it needs to cause bc to give a non-zero result or make test carries
5756 on without noticing the failure. Fixed.
5759 *) DES library cleanups.
5762 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
5763 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
5764 ciphers. NOTE: although the key derivation function has been verified
5765 against some published test vectors it has not been extensively tested
5766 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
5770 *) Instead of "mkdir -p", which is not fully portable, use new
5771 Perl script "util/mkdir-p.pl".
5774 *) Rewrite the way password based encryption (PBE) is handled. It used to
5775 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
5776 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
5777 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
5778 the 'parameter' field of the AlgorithmIdentifier is passed to the
5779 underlying key generation function so it must do its own ASN1 parsing.
5780 This has also changed the EVP_PBE_CipherInit() function which now has a
5781 'parameter' argument instead of literal salt and iteration count values
5782 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
5785 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
5786 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
5787 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
5788 KEY" because this clashed with PKCS#8 unencrypted string. Since this
5789 value was just used as a "magic string" and not used directly its
5790 value doesn't matter.
5793 *) Introduce some semblance of const correctness to BN. Shame C doesn't
5797 *) "linux-sparc64" configuration (ultrapenguin).
5798 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
5799 "linux-sparc" configuration.
5800 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
5802 *) config now generates no-xxx options for missing ciphers.
5805 *) Support the EBCDIC character set (work in progress).
5806 File ebcdic.c not yet included because it has a different license.
5807 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
5809 *) Support BS2000/OSD-POSIX.
5810 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
5812 *) Make callbacks for key generation use void * instead of char *.
5815 *) Make S/MIME samples compile (not yet tested).
5818 *) Additional typesafe stacks.
5821 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
5825 Changes between 0.9.3 and 0.9.3a [29 May 1999]
5827 *) New configuration variant "sco5-gcc".
5829 *) Updated some demos.
5830 [Sean O Riordain, Wade Scholine]
5832 *) Add missing BIO_free at exit of pkcs12 application.
5835 *) Fix memory leak in conf.c.
5838 *) Updates for Win32 to assembler version of MD5.
5841 *) Set #! path to perl in apps/der_chop to where we found it
5842 instead of using a fixed path.
5845 *) SHA library changes for irix64-mips4-cc.
5848 *) Improvements for VMS support.
5852 Changes between 0.9.2b and 0.9.3 [24 May 1999]
5854 *) Bignum library bug fix. IRIX 6 passes "make test" now!
5855 This also avoids the problems with SC4.2 and unpatched SC5.
5856 [Andy Polyakov <appro@fy.chalmers.se>]
5858 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
5859 These are required because of the typesafe stack would otherwise break
5860 existing code. If old code used a structure member which used to be STACK
5861 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
5862 sk_num or sk_value it would produce an error because the num, data members
5863 are not present in STACK_OF. Now it just produces a warning. sk_set
5864 replaces the old method of assigning a value to sk_value
5865 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
5866 that does this will no longer work (and should use sk_set instead) but
5867 this could be regarded as a "questionable" behaviour anyway.
5870 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
5871 correctly handle encrypted S/MIME data.
5874 *) Change type of various DES function arguments from des_cblock
5875 (which means, in function argument declarations, pointer to char)
5876 to des_cblock * (meaning pointer to array with 8 char elements),
5877 which allows the compiler to do more typechecking; it was like
5878 that back in SSLeay, but with lots of ugly casts.
5880 Introduce new type const_des_cblock.
5883 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
5884 problems: find RecipientInfo structure that matches recipient certificate
5885 and initialise the ASN1 structures properly based on passed cipher.
5888 *) Belatedly make the BN tests actually check the results.
5891 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
5892 to and from BNs: it was completely broken. New compilation option
5893 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
5894 key elements as negative integers.
5897 *) Reorganize and speed up MD5.
5898 [Andy Polyakov <appro@fy.chalmers.se>]
5901 [Richard Levitte <richard@levitte.org>]
5903 *) New option -out to asn1parse to allow the parsed structure to be
5904 output to a file. This is most useful when combined with the -strparse
5905 option to examine the output of things like OCTET STRINGS.
5908 *) Make SSL library a little more fool-proof by not requiring any longer
5909 that SSL_set_{accept,connect}_state be called before
5910 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
5911 in many applications because usually everything *appeared* to work as
5912 intended anyway -- now it really works as intended).
5915 *) Move openssl.cnf out of lib/.
5918 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
5919 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
5920 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
5921 [Ralf S. Engelschall]
5923 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
5924 handle PKCS#7 enveloped data properly.
5925 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
5927 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
5928 copying pointers. The cert_st handling is changed by this in
5929 various ways (and thus what used to be known as ctx->default_cert
5930 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
5931 any longer when s->cert does not give us what we need).
5932 ssl_cert_instantiate becomes obsolete by this change.
5933 As soon as we've got the new code right (possibly it already is?),
5934 we have solved a couple of bugs of the earlier code where s->cert
5935 was used as if it could not have been shared with other SSL structures.
5937 Note that using the SSL API in certain dirty ways now will result
5938 in different behaviour than observed with earlier library versions:
5939 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
5940 does not influence s as it used to.
5942 In order to clean up things more thoroughly, inside SSL_SESSION
5943 we don't use CERT any longer, but a new structure SESS_CERT
5944 that holds per-session data (if available); currently, this is
5945 the peer's certificate chain and, for clients, the server's certificate
5946 and temporary key. CERT holds only those values that can have
5947 meaningful defaults in an SSL_CTX.
5950 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
5951 from the internal representation. Various PKCS#7 fixes: remove some
5952 evil casts and set the enc_dig_alg field properly based on the signing
5956 *) Allow PKCS#12 password to be set from the command line or the
5957 environment. Let 'ca' get its config file name from the environment
5958 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
5962 *) Allow certificate policies extension to use an IA5STRING for the
5963 organization field. This is contrary to the PKIX definition but
5964 VeriSign uses it and IE5 only recognises this form. Document 'x509'
5968 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
5969 without disallowing inline assembler and the like for non-pedantic builds.
5972 *) Support Borland C++ builder.
5973 [Janez Jere <jj@void.si>, modified by Ulf Möller]
5978 *) SHA-1 cleanups and performance enhancements.
5979 [Andy Polyakov <appro@fy.chalmers.se>]
5981 *) Sparc v8plus assembler for the bignum library.
5982 [Andy Polyakov <appro@fy.chalmers.se>]
5984 *) Accept any -xxx and +xxx compiler options in Configure.
5987 *) Update HPUX configuration.
5990 *) Add missing sk_<type>_unshift() function to safestack.h
5991 [Ralf S. Engelschall]
5993 *) New function SSL_CTX_use_certificate_chain_file that sets the
5994 "extra_cert"s in addition to the certificate. (This makes sense
5995 only for "PEM" format files, as chains as a whole are not
5999 *) Support verify_depth from the SSL API.
6000 x509_vfy.c had what can be considered an off-by-one-error:
6001 Its depth (which was not part of the external interface)
6002 was actually counting the number of certificates in a chain;
6003 now it really counts the depth.
6006 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
6007 instead of X509err, which often resulted in confusing error
6008 messages since the error codes are not globally unique
6009 (e.g. an alleged error in ssl3_accept when a certificate
6010 didn't match the private key).
6012 *) New function SSL_CTX_set_session_id_context that allows to set a default
6013 value (so that you don't need SSL_set_session_id_context for each
6014 connection using the SSL_CTX).
6017 *) OAEP decoding bug fix.
6020 *) Support INSTALL_PREFIX for package builders, as proposed by
6024 *) New Configure options "threads" and "no-threads". For systems
6025 where the proper compiler options are known (currently Solaris
6026 and Linux), "threads" is the default.
6029 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
6032 *) Install various scripts to $(OPENSSLDIR)/misc, not to
6033 $(INSTALLTOP)/bin -- they shouldn't clutter directories
6034 such as /usr/local/bin.
6037 *) "make linux-shared" to build shared libraries.
6038 [Niels Poppe <niels@netbox.org>]
6040 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
6043 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
6044 extension adding in x509 utility.
6047 *) Remove NOPROTO sections and error code comments.
6050 *) Partial rewrite of the DEF file generator to now parse the ANSI
6054 *) New Configure options --prefix=DIR and --openssldir=DIR.
6057 *) Complete rewrite of the error code script(s). It is all now handled
6058 by one script at the top level which handles error code gathering,
6059 header rewriting and C source file generation. It should be much better
6060 than the old method: it now uses a modified version of Ulf's parser to
6061 read the ANSI prototypes in all header files (thus the old K&R definitions
6062 aren't needed for error creation any more) and do a better job of
6063 translating function codes into names. The old 'ASN1 error code imbedded
6064 in a comment' is no longer necessary and it doesn't use .err files which
6065 have now been deleted. Also the error code call doesn't have to appear all
6066 on one line (which resulted in some large lines...).
6069 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
6072 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
6073 0 (which usually indicates a closed connection), but continue reading.
6076 *) Fix some race conditions.
6079 *) Add support for CRL distribution points extension. Add Certificate
6080 Policies and CRL distribution points documentation.
6083 *) Move the autogenerated header file parts to crypto/opensslconf.h.
6086 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
6087 8 of keying material. Merlin has also confirmed interop with this fix
6088 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
6089 [Merlin Hughes <merlin@baltimore.ie>]
6091 *) Fix lots of warnings.
6092 [Richard Levitte <levitte@stacken.kth.se>]
6094 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
6095 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
6096 [Richard Levitte <levitte@stacken.kth.se>]
6098 *) Fix problems with sizeof(long) == 8.
6099 [Andy Polyakov <appro@fy.chalmers.se>]
6101 *) Change functions to ANSI C.
6104 *) Fix typos in error codes.
6105 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
6107 *) Remove defunct assembler files from Configure.
6110 *) SPARC v8 assembler BIGNUM implementation.
6111 [Andy Polyakov <appro@fy.chalmers.se>]
6113 *) Support for Certificate Policies extension: both print and set.
6114 Various additions to support the r2i method this uses.
6117 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
6118 return a const string when you are expecting an allocated buffer.
6121 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
6122 types DirectoryString and DisplayText.
6125 *) Add code to allow r2i extensions to access the configuration database,
6126 add an LHASH database driver and add several ctx helper functions.
6129 *) Fix an evil bug in bn_expand2() which caused various BN functions to
6130 fail when they extended the size of a BIGNUM.
6133 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
6134 support typesafe stack.
6137 *) Fix typo in SSL_[gs]et_options().
6138 [Nils Frostberg <nils@medcom.se>]
6140 *) Delete various functions and files that belonged to the (now obsolete)
6141 old X509V3 handling code.
6144 *) New Configure option "rsaref".
6147 *) Don't auto-generate pem.h.
6150 *) Introduce type-safe ASN.1 SETs.
6153 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
6154 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
6156 *) Introduce type-safe STACKs. This will almost certainly break lots of code
6157 that links with OpenSSL (well at least cause lots of warnings), but fear
6158 not: the conversion is trivial, and it eliminates loads of evil casts. A
6159 few STACKed things have been converted already. Feel free to convert more.
6160 In the fullness of time, I'll do away with the STACK type altogether.
6163 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
6164 specified in <certfile> by updating the entry in the index.txt file.
6165 This way one no longer has to edit the index.txt file manually for
6166 revoking a certificate. The -revoke option does the gory details now.
6167 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
6169 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
6170 `-text' option at all and this way the `-noout -text' combination was
6171 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
6172 [Ralf S. Engelschall]
6174 *) Make sure a corresponding plain text error message exists for the
6175 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
6176 verify callback function determined that a certificate was revoked.
6177 [Ralf S. Engelschall]
6179 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
6180 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
6181 all available cipers including rc5, which was forgotten until now.
6182 In order to let the testing shell script know which algorithms
6183 are available, a new (up to now undocumented) command
6184 "openssl list-cipher-commands" is used.
6187 *) Bugfix: s_client occasionally would sleep in select() when
6188 it should have checked SSL_pending() first.
6191 *) New functions DSA_do_sign and DSA_do_verify to provide access to
6192 the raw DSA values prior to ASN.1 encoding.
6195 *) Tweaks to Configure
6196 [Niels Poppe <niels@netbox.org>]
6198 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
6202 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
6205 *) New config option to avoid instructions that are illegal on the 80386.
6206 The default code is faster, but requires at least a 486.
6209 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
6210 SSL2_SERVER_VERSION (not used at all) macros, which are now the
6211 same as SSL2_VERSION anyway.
6214 *) New "-showcerts" option for s_client.
6217 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
6218 application. Various cleanups and fixes.
6221 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
6222 modify error routines to work internally. Add error codes and PBE init
6223 to library startup routines.
6226 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
6227 packing functions to asn1 and evp. Changed function names and error
6228 codes along the way.
6231 *) PKCS12 integration: and so it begins... First of several patches to
6232 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
6233 objects to objects.h
6236 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
6237 and display support for Thawte strong extranet extension.
6240 *) Add LinuxPPC support.
6241 [Jeff Dubrule <igor@pobox.org>]
6243 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
6244 bn_div_words in alpha.s.
6245 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
6247 *) Make sure the RSA OAEP test is skipped under -DRSAref because
6248 OAEP isn't supported when OpenSSL is built with RSAref.
6249 [Ulf Moeller <ulf@fitug.de>]
6251 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
6252 so they no longer are missing under -DNOPROTO.
6253 [Soren S. Jorvang <soren@t.dk>]
6256 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
6258 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
6259 doesn't work when the session is reused. Coming soon!
6262 *) Fix a security hole, that allows sessions to be reused in the wrong
6263 context thus bypassing client cert protection! All software that uses
6264 client certs and session caches in multiple contexts NEEDS PATCHING to
6265 allow session reuse! A fuller solution is in the works.
6266 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
6268 *) Some more source tree cleanups (removed obsolete files
6269 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
6270 permission on "config" script to be executable) and a fix for the INSTALL
6272 [Ulf Moeller <ulf@fitug.de>]
6274 *) Remove some legacy and erroneous uses of malloc, free instead of
6276 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
6278 *) Make rsa_oaep_test return non-zero on error.
6279 [Ulf Moeller <ulf@fitug.de>]
6281 *) Add support for native Solaris shared libraries. Configure
6282 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
6283 if someone would make that last step automatic.
6284 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
6286 *) ctx_size was not built with the right compiler during "make links". Fixed.
6289 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
6290 except NULL ciphers". This means the default cipher list will no longer
6291 enable NULL ciphers. They need to be specifically enabled e.g. with
6292 the string "DEFAULT:eNULL".
6295 *) Fix to RSA private encryption routines: if p < q then it would
6296 occasionally produce an invalid result. This will only happen with
6297 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
6300 *) Be less restrictive and allow also `perl util/perlpath.pl
6301 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
6302 because this way one can also use an interpreter named `perl5' (which is
6303 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
6304 installed as `perl').
6305 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6307 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
6308 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6310 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
6311 advapi32.lib to Win32 build and change the pem test comparision
6312 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
6313 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
6314 and crypto/des/ede_cbcm_enc.c.
6317 *) DES quad checksum was broken on big-endian architectures. Fixed.
6320 *) Comment out two functions in bio.h that aren't implemented. Fix up the
6321 Win32 test batch file so it (might) work again. The Win32 test batch file
6322 is horrible: I feel ill....
6325 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
6326 in e_os.h. Audit of header files to check ANSI and non ANSI
6327 sections: 10 functions were absent from non ANSI section and not exported
6328 from Windows DLLs. Fixed up libeay.num for new functions.
6331 *) Make `openssl version' output lines consistent.
6332 [Ralf S. Engelschall]
6334 *) Fix Win32 symbol export lists for BIO functions: Added
6335 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
6336 to ms/libeay{16,32}.def.
6337 [Ralf S. Engelschall]
6339 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
6340 fine under Unix and passes some trivial tests I've now added. But the
6341 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
6342 added to make sure no one expects that this stuff really works in the
6343 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
6344 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
6346 [Ralf S. Engelschall]
6348 *) Fix the generation of two part addresses in perl.
6349 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
6351 *) Add config entry for Linux on MIPS.
6352 [John Tobey <jtobey@channel1.com>]
6354 *) Make links whenever Configure is run, unless we are on Windoze.
6357 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
6358 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
6362 *) Add a useful kludge to allow package maintainers to specify compiler and
6363 other platforms details on the command line without having to patch the
6364 Configure script everytime: One now can use ``perl Configure
6365 <id>:<details>'', i.e. platform ids are allowed to have details appended
6366 to them (seperated by colons). This is treated as there would be a static
6367 pre-configured entry in Configure's %table under key <id> with value
6368 <details> and ``perl Configure <id>'' is called. So, when you want to
6369 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
6370 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
6371 now, which overrides the FreeBSD-elf entry on-the-fly.
6372 [Ralf S. Engelschall]
6374 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
6377 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
6378 on the `perl Configure ...' command line. This way one can compile
6379 OpenSSL libraries with Position Independent Code (PIC) which is needed
6380 for linking it into DSOs.
6381 [Ralf S. Engelschall]
6383 *) Remarkably, export ciphers were totally broken and no-one had noticed!
6387 *) Cleaned up the LICENSE document: The official contact for any license
6388 questions now is the OpenSSL core team under openssl-core@openssl.org.
6389 And add a paragraph about the dual-license situation to make sure people
6390 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
6391 to the OpenSSL toolkit.
6392 [Ralf S. Engelschall]
6394 *) General source tree makefile cleanups: Made `making xxx in yyy...'
6395 display consistent in the source tree and replaced `/bin/rm' by `rm'.
6396 Additonally cleaned up the `make links' target: Remove unnecessary
6397 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
6398 to speed processing and no longer clutter the display with confusing
6399 stuff. Instead only the actually done links are displayed.
6400 [Ralf S. Engelschall]
6402 *) Permit null encryption ciphersuites, used for authentication only. It used
6403 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
6404 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
6408 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
6409 signed attributes when verifying signatures (this would break them),
6410 the detached data encoding was wrong and public keys obtained using
6411 X509_get_pubkey() weren't freed.
6414 *) Add text documentation for the BUFFER functions. Also added a work around
6415 to a Win95 console bug. This was triggered by the password read stuff: the
6416 last character typed gets carried over to the next fread(). If you were
6417 generating a new cert request using 'req' for example then the last
6418 character of the passphrase would be CR which would then enter the first
6422 *) Added the new `Includes OpenSSL Cryptography Software' button as
6423 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
6424 button and can be used by applications based on OpenSSL to show the
6425 relationship to the OpenSSL project.
6426 [Ralf S. Engelschall]
6428 *) Remove confusing variables in function signatures in files
6429 ssl/ssl_lib.c and ssl/ssl.h.
6430 [Lennart Bong <lob@kulthea.stacken.kth.se>]
6432 *) Don't install bss_file.c under PREFIX/include/
6433 [Lennart Bong <lob@kulthea.stacken.kth.se>]
6435 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
6436 functions that return function pointers and has support for NT specific
6437 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
6438 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
6439 unsigned to signed types: this was killing the Win32 compile.
6442 *) Add new certificate file to stack functions,
6443 SSL_add_dir_cert_subjects_to_stack() and
6444 SSL_add_file_cert_subjects_to_stack(). These largely supplant
6445 SSL_load_client_CA_file(), and can be used to add multiple certs easily
6446 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
6447 This means that Apache-SSL and similar packages don't have to mess around
6448 to add as many CAs as they want to the preferred list.
6451 *) Experiment with doxygen documentation. Currently only partially applied to
6453 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
6454 openssl.doxy as the configuration file.
6457 *) Get rid of remaining C++-style comments which strict C compilers hate.
6458 [Ralf S. Engelschall, pointed out by Carlos Amengual]
6460 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
6461 compiled in by default: it has problems with large keys.
6464 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
6465 DH private keys and/or callback functions which directly correspond to
6466 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
6467 is needed for applications which have to configure certificates on a
6468 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
6470 For the RSA certificate situation is makes no difference, but
6471 for the DSA certificate situation this fixes the "no shared cipher"
6472 problem where the OpenSSL cipher selection procedure failed because the
6473 temporary keys were not overtaken from the context and the API provided
6474 no way to reconfigure them.
6475 The new functions now let applications reconfigure the stuff and they
6476 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
6477 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
6478 non-public-API function ssl_cert_instantiate() is used as a helper
6479 function and also to reduce code redundancy inside ssl_rsa.c.
6480 [Ralf S. Engelschall]
6482 *) Move s_server -dcert and -dkey options out of the undocumented feature
6483 area because they are useful for the DSA situation and should be
6484 recognized by the users.
6485 [Ralf S. Engelschall]
6487 *) Fix the cipher decision scheme for export ciphers: the export bits are
6488 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
6489 SSL_EXP_MASK. So, the original variable has to be used instead of the
6490 already masked variable.
6491 [Richard Levitte <levitte@stacken.kth.se>]
6493 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
6494 [Richard Levitte <levitte@stacken.kth.se>]
6496 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
6497 from `int' to `unsigned int' because it's a length and initialized by
6498 EVP_DigestFinal() which expects an `unsigned int *'.
6499 [Richard Levitte <levitte@stacken.kth.se>]
6501 *) Don't hard-code path to Perl interpreter on shebang line of Configure
6502 script. Instead use the usual Shell->Perl transition trick.
6503 [Ralf S. Engelschall]
6505 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
6506 (in addition to RSA certificates) to match the behaviour of `openssl dsa
6507 -noout -modulus' as it's already the case for `openssl rsa -noout
6508 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
6509 currently the public key is printed (a decision which was already done by
6510 `openssl dsa -modulus' in the past) which serves a similar purpose.
6511 Additionally the NO_RSA no longer completely removes the whole -modulus
6512 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
6514 [Ralf S. Engelschall]
6516 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
6517 BIO. See the source (crypto/evp/bio_ok.c) for more info.
6518 [Arne Ansper <arne@ats.cyber.ee>]
6520 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
6521 to be added. Now both 'req' and 'ca' can use new objects defined in the
6525 *) Add cool BIO that does syslog (or event log on NT).
6526 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
6528 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
6529 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
6530 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
6531 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
6534 *) Add preliminary config info for new extension code.
6537 *) Make RSA_NO_PADDING really use no padding.
6538 [Ulf Moeller <ulf@fitug.de>]
6540 *) Generate errors when private/public key check is done.
6543 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
6544 for some CRL extensions and new objects added.
6547 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
6548 key usage extension and fuller support for authority key id.
6551 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
6552 padding method for RSA, which is recommended for new applications in PKCS
6553 #1 v2.0 (RFC 2437, October 1998).
6554 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
6555 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
6556 against Bleichbacher's attack on RSA.
6557 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
6560 *) Updates to the new SSL compression code
6561 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
6563 *) Fix so that the version number in the master secret, when passed
6564 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
6565 (because the server will not accept higher), that the version number
6566 is 0x03,0x01, not 0x03,0x00
6567 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
6569 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
6570 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
6571 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
6574 *) Support for RAW extensions where an arbitrary extension can be
6575 created by including its DER encoding. See apps/openssl.cnf for
6579 *) Make sure latest Perl versions don't interpret some generated C array
6580 code as Perl array code in the crypto/err/err_genc.pl script.
6581 [Lars Weber <3weber@informatik.uni-hamburg.de>]
6583 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
6584 not many people have the assembler. Various Win32 compilation fixes and
6585 update to the INSTALL.W32 file with (hopefully) more accurate Win32
6589 *) Modify configure script 'Configure' to automatically create crypto/date.h
6590 file under Win32 and also build pem.h from pem.org. New script
6591 util/mkfiles.pl to create the MINFO file on environments that can't do a
6592 'make files': perl util/mkfiles.pl >MINFO should work.
6595 *) Major rework of DES function declarations, in the pursuit of correctness
6596 and purity. As a result, many evil casts evaporated, and some weirdness,
6597 too. You may find this causes warnings in your code. Zapping your evil
6598 casts will probably fix them. Mostly.
6601 *) Fix for a typo in asn1.h. Bug fix to object creation script
6602 obj_dat.pl. It considered a zero in an object definition to mean
6603 "end of object": none of the objects in objects.h have any zeros
6604 so it wasn't spotted.
6605 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
6607 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
6608 Masking (CBCM). In the absence of test vectors, the best I have been able
6609 to do is check that the decrypt undoes the encrypt, so far. Send me test
6610 vectors if you have them.
6613 *) Correct calculation of key length for export ciphers (too much space was
6614 allocated for null ciphers). This has not been tested!
6617 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
6618 message is now correct (it understands "crypto" and "ssl" on its
6619 command line). There is also now an "update" option. This will update
6620 the util/ssleay.num and util/libeay.num files with any new functions.
6622 perl util/mkdef.pl crypto ssl update
6623 it will update them.
6626 *) Overhauled the Perl interface (perl/*):
6627 - ported BN stuff to OpenSSL's different BN library
6628 - made the perl/ source tree CVS-aware
6629 - renamed the package from SSLeay to OpenSSL (the files still contain
6630 their history because I've copied them in the repository)
6631 - removed obsolete files (the test scripts will be replaced
6632 by better Test::Harness variants in the future)
6633 [Ralf S. Engelschall]
6635 *) First cut for a very conservative source tree cleanup:
6636 1. merge various obsolete readme texts into doc/ssleay.txt
6637 where we collect the old documents and readme texts.
6638 2. remove the first part of files where I'm already sure that we no
6639 longer need them because of three reasons: either they are just temporary
6640 files which were left by Eric or they are preserved original files where
6641 I've verified that the diff is also available in the CVS via "cvs diff
6642 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
6643 the crypto/md/ stuff).
6644 [Ralf S. Engelschall]
6646 *) More extension code. Incomplete support for subject and issuer alt
6647 name, issuer and authority key id. Change the i2v function parameters
6648 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
6649 what that's for :-) Fix to ASN1 macro which messed up
6650 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
6653 *) Preliminary support for ENUMERATED type. This is largely copied from the
6657 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
6658 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
6660 *) Make sure `make rehash' target really finds the `openssl' program.
6661 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6663 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
6664 like to hear about it if this slows down other processors.
6667 *) Add CygWin32 platform information to Configure script.
6668 [Alan Batie <batie@aahz.jf.intel.com>]
6670 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
6671 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
6673 *) New program nseq to manipulate netscape certificate sequences
6676 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
6680 *) Fixes to BN code. Previously the default was to define BN_RECURSION
6681 but the BN code had some problems that would cause failures when
6682 doing certificate verification and some other functions.
6683 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
6685 *) Add ASN1 and PEM code to support netscape certificate sequences.
6688 *) Add ASN1 and PEM code to support netscape certificate sequences.
6691 *) Add several PKIX and private extended key usage OIDs.
6694 *) Modify the 'ca' program to handle the new extension code. Modify
6695 openssl.cnf for new extension format, add comments.
6698 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
6699 and add a sample to openssl.cnf so req -x509 now adds appropriate
6703 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
6704 error code, add initial support to X509_print() and x509 application.
6707 *) Takes a deep breath and start addding X509 V3 extension support code. Add
6708 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
6709 stuff is currently isolated and isn't even compiled yet.
6712 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
6713 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
6714 Removed the versions check from X509 routines when loading extensions:
6715 this allows certain broken certificates that don't set the version
6716 properly to be processed.
6719 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
6720 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
6721 can still be regenerated with "make depend".
6724 *) Spelling mistake in C version of CAST-128.
6725 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
6727 *) Changes to the error generation code. The perl script err-code.pl
6728 now reads in the old error codes and retains the old numbers, only
6729 adding new ones if necessary. It also only changes the .err files if new
6730 codes are added. The makefiles have been modified to only insert errors
6731 when needed (to avoid needlessly modifying header files). This is done
6732 by only inserting errors if the .err file is newer than the auto generated
6733 C file. To rebuild all the error codes from scratch (the old behaviour)
6734 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
6735 or delete all the .err files.
6738 *) CAST-128 was incorrectly implemented for short keys. The C version has
6739 been fixed, but is untested. The assembler versions are also fixed, but
6740 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
6741 to regenerate it if needed.
6742 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
6743 Hagino <itojun@kame.net>]
6745 *) File was opened incorrectly in randfile.c.
6746 [Ulf Möller <ulf@fitug.de>]
6748 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
6749 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
6750 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
6751 al: it's just almost always a UTCTime. Note this patch adds new error
6752 codes so do a "make errors" if there are problems.
6755 *) Correct Linux 1 recognition in config.
6756 [Ulf Möller <ulf@fitug.de>]
6758 *) Remove pointless MD5 hash when using DSA keys in ca.
6759 [Anonymous <nobody@replay.com>]
6761 *) Generate an error if given an empty string as a cert directory. Also
6762 generate an error if handed NULL (previously returned 0 to indicate an
6763 error, but didn't set one).
6764 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
6766 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
6769 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
6770 parameters. This was causing a warning which killed off the Win32 compile.
6773 *) Remove C++ style comments from crypto/bn/bn_local.h.
6774 [Neil Costigan <neil.costigan@celocom.com>]
6776 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
6777 based on a text string, looking up short and long names and finally
6778 "dot" format. The "dot" format stuff didn't work. Added new function
6779 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
6780 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
6781 OID is not part of the table.
6784 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
6785 X509_LOOKUP_by_alias().
6788 *) Sort openssl functions by name.
6791 *) Get the gendsa program working (hopefully) and add it to app list. Remove
6792 encryption from sample DSA keys (in case anyone is interested the password
6796 *) Make _all_ *_free functions accept a NULL pointer.
6797 [Frans Heymans <fheymans@isaserver.be>]
6799 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
6801 [Anonymous <nobody@replay.com>]
6803 *) s_server should send the CAfile as acceptable CAs, not its own cert.
6804 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
6806 *) Don't blow it for numeric -newkey arguments to apps/req.
6807 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
6809 *) Temp key "for export" tests were wrong in s3_srvr.c.
6810 [Anonymous <nobody@replay.com>]
6812 *) Add prototype for temp key callback functions
6813 SSL_CTX_set_tmp_{rsa,dh}_callback().
6816 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
6817 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
6820 *) X509_name_add_entry() freed the wrong thing after an error.
6821 [Arne Ansper <arne@ats.cyber.ee>]
6823 *) rsa_eay.c would attempt to free a NULL context.
6824 [Arne Ansper <arne@ats.cyber.ee>]
6826 *) BIO_s_socket() had a broken should_retry() on Windoze.
6827 [Arne Ansper <arne@ats.cyber.ee>]
6829 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
6830 [Arne Ansper <arne@ats.cyber.ee>]
6832 *) Make sure the already existing X509_STORE->depth variable is initialized
6833 in X509_STORE_new(), but document the fact that this variable is still
6834 unused in the certificate verification process.
6835 [Ralf S. Engelschall]
6837 *) Fix the various library and apps files to free up pkeys obtained from
6838 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
6841 *) Fix reference counting in X509_PUBKEY_get(). This makes
6842 demos/maurice/example2.c work, amongst others, probably.
6843 [Steve Henson and Ben Laurie]
6845 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
6846 `openssl' and second, the shortcut symlinks for the `openssl <command>'
6847 are no longer created. This way we have a single and consistent command
6848 line interface `openssl <command>', similar to `cvs <command>'.
6849 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
6851 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
6852 BIT STRING wrapper always have zero unused bits.
6855 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
6858 *) Make the top-level INSTALL documentation easier to understand.
6861 *) Makefiles updated to exit if an error occurs in a sub-directory
6862 make (including if user presses ^C) [Paul Sutton]
6864 *) Make Montgomery context stuff explicit in RSA data structure.
6867 *) Fix build order of pem and err to allow for generated pem.h.
6870 *) Fix renumbering bug in X509_NAME_delete_entry().
6873 *) Enhanced the err-ins.pl script so it makes the error library number
6874 global and can add a library name. This is needed for external ASN1 and
6875 other error libraries.
6878 *) Fixed sk_insert which never worked properly.
6881 *) Fix ASN1 macros so they can handle indefinite length construted
6882 EXPLICIT tags. Some non standard certificates use these: they can now
6886 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
6887 into a single doc/ssleay.txt bundle. This way the information is still
6888 preserved but no longer messes up this directory. Now it's new room for
6889 the new set of documenation files.
6890 [Ralf S. Engelschall]
6892 *) SETs were incorrectly DER encoded. This was a major pain, because they
6893 shared code with SEQUENCEs, which aren't coded the same. This means that
6894 almost everything to do with SETs or SEQUENCEs has either changed name or
6895 number of arguments.
6896 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
6898 *) Fix test data to work with the above.
6901 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
6902 was already fixed by Eric for 0.9.1 it seems.
6903 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
6905 *) Autodetect FreeBSD3.
6908 *) Fix various bugs in Configure. This affects the following platforms:
6912 unixware-2.0-pentium
6916 *) Eliminate generated files from CVS. Reorder tests to regenerate files
6917 before they are needed.
6920 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
6924 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
6926 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
6927 changed SSLeay to OpenSSL in version strings.
6928 [Ralf S. Engelschall]
6930 *) Some fixups to the top-level documents.
6933 *) Fixed the nasty bug where rsaref.h was not found under compile-time
6934 because the symlink to include/ was missing.
6935 [Ralf S. Engelschall]
6937 *) Incorporated the popular no-RSA/DSA-only patches
6938 which allow to compile a RSA-free SSLeay.
6939 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
6941 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
6942 when "ssleay" is still not found.
6943 [Ralf S. Engelschall]
6945 *) Added more platforms to Configure: Cray T3E, HPUX 11,
6946 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
6948 *) Updated the README file.
6949 [Ralf S. Engelschall]
6951 *) Added various .cvsignore files in the CVS repository subdirs
6952 to make a "cvs update" really silent.
6953 [Ralf S. Engelschall]
6955 *) Recompiled the error-definition header files and added
6956 missing symbols to the Win32 linker tables.
6957 [Ralf S. Engelschall]
6959 *) Cleaned up the top-level documents;
6960 o new files: CHANGES and LICENSE
6961 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
6962 o merged COPYRIGHT into LICENSE
6963 o removed obsolete TODO file
6964 o renamed MICROSOFT to INSTALL.W32
6965 [Ralf S. Engelschall]
6967 *) Removed dummy files from the 0.9.1b source tree:
6968 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
6969 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
6970 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
6971 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
6972 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
6973 [Ralf S. Engelschall]
6975 *) Added various platform portability fixes.
6978 *) The Genesis of the OpenSSL rpject:
6979 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
6980 Young and Tim J. Hudson created while they were working for C2Net until
6982 [The OpenSSL Project]
6985 Changes between 0.9.0b and 0.9.1b [not released]
6987 *) Updated a few CA certificates under certs/
6990 *) Changed some BIGNUM api stuff.
6993 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
6994 DGUX x86, Linux Alpha, etc.
6997 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
6998 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
7002 *) Add -strparse option to asn1pars program which parses nested
7004 [Dr Stephen Henson <shenson@bigfoot.com>]
7006 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
7009 *) DSA fix for "ca" program.
7012 *) Added "-genkey" option to "dsaparam" program.
7015 *) Added RIPE MD160 (rmd160) message digest.
7018 *) Added -a (all) option to "ssleay version" command.
7021 *) Added PLATFORM define which is the id given to Configure.
7024 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
7027 *) Extended the ASN.1 parser routines.
7030 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
7033 *) Added a BN_CTX to the BN library.
7036 *) Fixed the weak key values in DES library
7039 *) Changed API in EVP library for cipher aliases.
7042 *) Added support for RC2/64bit cipher.
7045 *) Converted the lhash library to the crypto/mem.c functions.
7048 *) Added more recognized ASN.1 object ids.
7051 *) Added more RSA padding checks for SSL/TLS.
7054 *) Added BIO proxy/filter functionality.
7057 *) Added extra_certs to SSL_CTX which can be used
7058 send extra CA certificates to the client in the CA cert chain sending
7059 process. It can be configured with SSL_CTX_add_extra_chain_cert().
7062 *) Now Fortezza is denied in the authentication phase because
7063 this is key exchange mechanism is not supported by SSLeay at all.
7066 *) Additional PKCS1 checks.
7069 *) Support the string "TLSv1" for all TLS v1 ciphers.
7072 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
7073 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
7076 *) Fixed a few memory leaks.
7079 *) Fixed various code and comment typos.
7082 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
7083 bytes sent in the client random.
7084 [Edward Bishop <ebishop@spyglass.com>]