5 Changes between 0.9.8a and 0.9.9 [xx XXX xxxx]
7 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
8 utilities such as rsa, dsa, dsaparam etc except they processes any key
12 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
13 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
14 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
18 *) Initial support for pluggable public key ASN1.
19 De-spaghettify the public key ASN1 handling. Move public and private
20 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
21 algorithm specific handling to a single module within the relevant
22 algorithm directory. Add functions to allow (near) opaque processing
23 of public and private key structures.
26 *) Implement the Supported Point Formats Extension for
27 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
30 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
31 for the psk identity [hint] and the psk callback functions to the
32 SSL_SESSION, SSL and SSL_CTX structure.
35 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
39 SSL_CTX_use_psk_identity_hint
40 SSL_get_psk_identity_hint
42 SSL_use_psk_identity_hint
44 [Mika Kousa and Pasi Eronen of Nokia Corporation]
46 *) Add RFC 3161 compliant time stamp request creation, response generation
47 and response verification functionality.
48 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
50 *) Add initial support for TLS extensions, specifically for the server_name
51 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
52 have new members for a host name. The SSL data structure has an
53 additional member SSL_CTX *initial_ctx so that new sessions can be
54 stored in that context to allow for session resumption, even after the
55 SSL has been switched to a new SSL_CTX in reaction to a client's
56 server_name extension.
58 New functions (subject to change):
61 SSL_get_servername_type()
64 New CTRL codes and macros (subject to change):
66 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
67 - SSL_CTX_set_tlsext_servername_callback()
68 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
69 - SSL_CTX_set_tlsext_servername_arg()
70 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_hostname()
72 openssl s_client has a new '-servername ...' option.
74 openssl s_server has new options '-servername_host ...', '-cert2 ...',
75 '-key2 ...', '-servername_fatal' (subject to change). This allows
76 testing the HostName extension for a specific single host name ('-cert'
77 and '-key' remain fallbacks for handshakes without HostName
78 negotiation). If the unrecogninzed_name alert has to be sent, this by
79 default is a warning; it becomes fatal with the '-servername_fatal'
82 [Peter Sylvester, Remy Allais, Christophe Renou]
84 *) Whirlpool hash implementation is added.
87 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
88 bn(64,32). Because of instruction set limitations it doesn't have
89 any negative impact on performance. This was done mostly in order
90 to make it possible to share assembler modules, such as bn_mul_mont
91 implementations, between 32- and 64-bit builds without hassle.
94 *) Disable rogue ciphersuites:
96 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
97 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
98 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
100 The latter two were purportedly from
101 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
104 Other ciphersuites from draft-ietf-tls-56-bit-ciphersuites-01.txt
105 remain enabled for now, but are just as unofficial, and the ID
106 has long expired; these will probably disappear soon.
109 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
110 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
114 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
115 dedicated Montgomery multiplication procedure, is introduced.
116 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
117 "64-bit" performance on certain 32-bit targets.
120 *) New option SSL_OP_NO_COMP to disable use of compression selectively
121 in SSL structures. New SSL ctrl to set maximum send fragment size.
122 Save memory by seeting the I/O buffer sizes dynamically instead of
123 using the maximum available value.
126 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
127 in addition to the text details.
130 *) Very, very preliminary EXPERIMENTAL support for printing of general
131 ASN1 structures. This currently produces rather ugly output and doesn't
132 handle several customised structures at all.
135 *) Integrated support for PVK file format and some related formats such
136 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
137 these in the 'rsa' and 'dsa' utilities.
140 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
143 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
144 place for the (very old) "NETSCAPE" format certificates which are now
145 handled using new ASN1 code equivalents.
148 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
149 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
150 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
153 *) Modify CRL distribution points extension code to print out previously
154 unsupported fields. Enhance extension setting code to allow setting of
158 *) Add print and set support for Issuing Distribution Point CRL extension.
161 Changes between 0.9.8a and 0.9.8b [XX xxx XXXX]
163 *) Link in manifests for VC++ if needed.
164 [Austin Ziegler <halostatue@gmail.com>]
166 *) Update support for ECC-based TLS ciphersuites according to
167 draft-ietf-tls-ecc-12.txt with proposed changes (but without
168 TLS extensions, which are supported starting with the 0.9.9
169 branch, not in the OpenSSL 0.9.8 branch).
172 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
173 opaque EVP_CIPHER_CTX handling.
176 *) Fixes and enhancements to zlib compression code. We now only use
177 "zlib1.dll" and use the default __cdecl calling convention on Win32
178 to conform with the standards mentioned here:
179 http://www.zlib.net/DLL_FAQ.txt
180 Static zlib linking now works on Windows and the new --with-zlib-include
181 --with-zlib-lib options to Configure can be used to supply the location
182 of the headers and library. Gracefully handle case where zlib library
186 *) Several fixes and enhancements to the OID generation code. The old code
187 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
188 handle numbers larger than ULONG_MAX, truncated printing and had a
189 non standard OBJ_obj2txt() behaviour.
192 *) Add support for building of engines under engine/ as shared libraries
193 under VC++ build system.
196 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
197 Hopefully, we will not see any false combination of paths any more.
200 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
202 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
203 (part of SSL_OP_ALL). This option used to disable the
204 countermeasure against man-in-the-middle protocol-version
205 rollback in the SSL 2.0 server implementation, which is a bad
206 idea. (CVE-2005-2969)
208 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
209 for Information Security, National Institute of Advanced Industrial
210 Science and Technology [AIST], Japan)]
212 *) Add two function to clear and return the verify parameter flags.
215 *) Keep cipherlists sorted in the source instead of sorting them at
216 runtime, thus removing the need for a lock.
219 *) Avoid some small subgroup attacks in Diffie-Hellman.
220 [Nick Mathewson and Ben Laurie]
222 *) Add functions for well-known primes.
225 *) Extended Windows CE support.
226 [Satoshi Nakamura and Andy Polyakov]
228 *) Initialize SSL_METHOD structures at compile time instead of during
229 runtime, thus removing the need for a lock.
232 *) Make PKCS7_decrypt() work even if no certificate is supplied by
233 attempting to decrypt each encrypted key in turn. Add support to
237 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
239 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
242 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
243 key into the same file any more.
246 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
249 *) Add -utf8 command line and config file option to 'ca'.
250 [Stefan <stf@udoma.org]
252 *) Removed the macro des_crypt(), as it seems to conflict with some
253 libraries. Use DES_crypt().
256 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
257 involves renaming the source and generated shared-libs for
258 both. The engines will accept the corrected or legacy ids
259 ('ncipher' and '4758_cca' respectively) when binding. NB,
260 this only applies when building 'shared'.
261 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
263 *) Add attribute functions to EVP_PKEY structure. Modify
264 PKCS12_create() to recognize a CSP name attribute and
265 use it. Make -CSP option work again in pkcs12 utility.
268 *) Add new functionality to the bn blinding code:
269 - automatic re-creation of the BN_BLINDING parameters after
270 a fixed number of uses (currently 32)
271 - add new function for parameter creation
272 - introduce flags to control the update behaviour of the
273 BN_BLINDING parameters
274 - hide BN_BLINDING structure
275 Add a second BN_BLINDING slot to the RSA structure to improve
276 performance when a single RSA object is shared among several
280 *) Add support for DTLS.
281 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
283 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
284 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
287 *) Remove buggy and incompletet DH cert support from
288 ssl/ssl_rsa.c and ssl/s3_both.c
291 *) Use SHA-1 instead of MD5 as the default digest algorithm for
292 the apps/openssl applications.
295 *) Compile clean with "-Wall -Wmissing-prototypes
296 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
297 DEBUG_SAFESTACK must also be set.
300 *) Change ./Configure so that certain algorithms can be disabled by default.
301 The new counterpiece to "no-xxx" is "enable-xxx".
303 The patented RC5 and MDC2 algorithms will now be disabled unless
304 "enable-rc5" and "enable-mdc2", respectively, are specified.
306 (IDEA remains enabled despite being patented. This is because IDEA
307 is frequently required for interoperability, and there is no license
308 fee for non-commercial use. As before, "no-idea" can be used to
309 avoid this algorithm.)
313 *) Add processing of proxy certificates (see RFC 3820). This work was
314 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
315 EGEE (Enabling Grids for E-science in Europe).
318 *) RC4 performance overhaul on modern architectures/implementations, such
319 as Intel P4, IA-64 and AMD64.
322 *) New utility extract-section.pl. This can be used specify an alternative
323 section number in a pod file instead of having to treat each file as
324 a separate case in Makefile. This can be done by adding two lines to the
327 =for comment openssl_section:XXX
329 The blank line is mandatory.
333 *) New arguments -certform, -keyform and -pass for s_client and s_server
334 to allow alternative format key and certificate files and passphrase
338 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
339 update associated structures and add various utility functions.
341 Add new policy related verify parameters, include policy checking in
342 standard verify code. Enhance 'smime' application with extra parameters
343 to support policy checking and print out.
346 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
347 Nehemiah processors. These extensions support AES encryption in hardware
348 as well as RNG (though RNG support is currently disabled).
349 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
351 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
354 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
355 [Andy Polyakov and a number of other people]
357 *) Improved PowerPC platform support. Most notably BIGNUM assembler
358 implementation contributed by IBM.
359 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
361 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
362 exponent rather than 'unsigned long'. There is a corresponding change to
363 the new 'rsa_keygen' element of the RSA_METHOD structure.
364 [Jelte Jansen, Geoff Thorpe]
366 *) Functionality for creating the initial serial number file is now
367 moved from CA.pl to the 'ca' utility with a new option -create_serial.
369 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
370 number file to 1, which is bound to cause problems. To avoid
371 the problems while respecting compatibility between different 0.9.7
372 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
373 CA.pl for serial number initialization. With the new release 0.9.8,
374 we can fix the problem directly in the 'ca' utility.)
377 *) Reduced header interdepencies by declaring more opaque objects in
378 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
379 give fewer recursive includes, which could break lazy source code - so
380 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
381 developers should define this symbol when building and using openssl to
382 ensure they track the recommended behaviour, interfaces, [etc], but
383 backwards-compatible behaviour prevails when this isn't defined.
386 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
389 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
390 This will generate a random key of the appropriate length based on the
391 cipher context. The EVP_CIPHER can provide its own random key generation
392 routine to support keys of a specific form. This is used in the des and
393 3des routines to generate a key of the correct parity. Update S/MIME
394 code to use new functions and hence generate correct parity DES keys.
395 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
396 valid (weak or incorrect parity).
399 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
400 as looking them up. This is useful when the verified structure may contain
401 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
402 present unless the new PKCS7_NO_CRL flag is asserted.
405 *) Extend ASN1 oid configuration module. It now additionally accepts the
408 shortName = some long name, 1.2.3.4
411 *) Reimplemented the BN_CTX implementation. There is now no more static
412 limitation on the number of variables it can handle nor the depth of the
413 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
414 information can now expand as required, and rather than having a single
415 static array of bignums, BN_CTX now uses a linked-list of such arrays
416 allowing it to expand on demand whilst maintaining the usefulness of
420 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
421 to allow all RSA operations to function using a single BN_CTX.
424 *) Preliminary support for certificate policy evaluation and checking. This
425 is initially intended to pass the tests outlined in "Conformance Testing
426 of Relying Party Client Certificate Path Processing Logic" v1.07.
429 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
430 remained unused and not that useful. A variety of other little bignum
431 tweaks and fixes have also been made continuing on from the audit (see
435 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
436 associated ASN1, EVP and SSL functions and old ASN1 macros.
439 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
440 and this should never fail. So the return value from the use of
441 BN_set_word() (which can fail due to needless expansion) is now deprecated;
442 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
445 *) BN_CTX_get() should return zero-valued bignums, providing the same
446 initialised value as BN_new().
447 [Geoff Thorpe, suggested by Ulf Möller]
449 *) Support for inhibitAnyPolicy certificate extension.
452 *) An audit of the BIGNUM code is underway, for which debugging code is
453 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
454 is considered valid when processing BIGNUMs, and causes execution to
455 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
456 further steps are taken to deliberately pollute unused data in BIGNUM
457 structures to try and expose faulty code further on. For now, openssl will
458 (in its default mode of operation) continue to tolerate the inconsistent
459 forms that it has tolerated in the past, but authors and packagers should
460 consider trying openssl and their own applications when compiled with
461 these debugging symbols defined. It will help highlight potential bugs in
462 their own code, and will improve the test coverage for OpenSSL itself. At
463 some point, these tighter rules will become openssl's default to improve
464 maintainability, though the assert()s and other overheads will remain only
465 in debugging configurations. See bn.h for more details.
466 [Geoff Thorpe, Nils Larsch, Ulf Möller]
468 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
469 that can only be obtained through BN_CTX_new() (which implicitly
470 initialises it). The presence of this function only made it possible
471 to overwrite an existing structure (and cause memory leaks).
474 *) Because of the callback-based approach for implementing LHASH as a
475 template type, lh_insert() adds opaque objects to hash-tables and
476 lh_doall() or lh_doall_arg() are typically used with a destructor callback
477 to clean up those corresponding objects before destroying the hash table
478 (and losing the object pointers). So some over-zealous constifications in
479 LHASH have been relaxed so that lh_insert() does not take (nor store) the
480 objects as "const" and the lh_doall[_arg] callback wrappers are not
481 prototyped to have "const" restrictions on the object pointers they are
482 given (and so aren't required to cast them away any more).
485 *) The tmdiff.h API was so ugly and minimal that our own timing utility
486 (speed) prefers to use its own implementation. The two implementations
487 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
488 its object type properly exposed (MS_TM) instead of casting to/from "char
489 *". This may still change yet if someone realises MS_TM and "ms_time_***"
490 aren't necessarily the greatest nomenclatures - but this is what was used
491 internally to the implementation so I've used that for now.
494 *) Ensure that deprecated functions do not get compiled when
495 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
496 the self-tests were still using deprecated key-generation functions so
497 these have been updated also.
500 *) Reorganise PKCS#7 code to separate the digest location functionality
501 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
502 New function PKCS7_set_digest() to set the digest type for PKCS#7
503 digestedData type. Add additional code to correctly generate the
504 digestedData type and add support for this type in PKCS7 initialization
508 *) New function PKCS7_set0_type_other() this initializes a PKCS7
509 structure of type "other".
512 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
513 sure the loop does correctly stop and breaking ("division by zero")
514 modulus operations are not performed. The (pre-generated) prime
515 table crypto/bn/bn_prime.h was already correct, but it could not be
516 re-generated on some platforms because of the "division by zero"
517 situation in the script.
518 [Ralf S. Engelschall]
520 *) Update support for ECC-based TLS ciphersuites according to
521 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
522 SHA-1 now is only used for "small" curves (where the
523 representation of a field element takes up to 24 bytes); for
524 larger curves, the field element resulting from ECDH is directly
525 used as premaster secret.
526 [Douglas Stebila (Sun Microsystems Laboratories)]
528 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
529 curve secp160r1 to the tests.
530 [Douglas Stebila (Sun Microsystems Laboratories)]
532 *) Add the possibility to load symbols globally with DSO.
533 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
535 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
536 control of the error stack.
539 *) Add support for STORE in ENGINE.
542 *) Add the STORE type. The intention is to provide a common interface
543 to certificate and key stores, be they simple file-based stores, or
544 HSM-type store, or LDAP stores, or...
545 NOTE: The code is currently UNTESTED and isn't really used anywhere.
548 *) Add a generic structure called OPENSSL_ITEM. This can be used to
549 pass a list of arguments to any function as well as provide a way
550 for a function to pass data back to the caller.
553 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
554 works like BUF_strdup() but can be used to duplicate a portion of
555 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
559 *) Add the function sk_find_ex() which works like sk_find(), but will
560 return an index to an element even if an exact match couldn't be
561 found. The index is guaranteed to point at the element where the
562 searched-for key would be inserted to preserve sorting order.
565 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
566 takes an extra flags argument for optional functionality. Currently,
567 the following flags are defined:
569 OBJ_BSEARCH_VALUE_ON_NOMATCH
570 This one gets OBJ_bsearch_ex() to return a pointer to the first
571 element where the comparing function returns a negative or zero
574 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
575 This one gets OBJ_bsearch_ex() to return a pointer to the first
576 element where the comparing function returns zero. This is useful
577 if there are more than one element where the comparing function
581 *) Make it possible to create self-signed certificates with 'openssl ca'
582 in such a way that the self-signed certificate becomes part of the
583 CA database and uses the same mechanisms for serial number generation
584 as all other certificate signing. The new flag '-selfsign' enables
585 this functionality. Adapt CA.sh and CA.pl.in.
588 *) Add functionality to check the public key of a certificate request
589 against a given private. This is useful to check that a certificate
590 request can be signed by that key (self-signing).
593 *) Make it possible to have multiple active certificates with the same
594 subject in the CA index file. This is done only if the keyword
595 'unique_subject' is set to 'no' in the main CA section (default
596 if 'CA_default') of the configuration file. The value is saved
597 with the database itself in a separate index attribute file,
598 named like the index file with '.attr' appended to the name.
601 *) Generate muti valued AVAs using '+' notation in config files for
605 *) Support for nameConstraints certificate extension.
608 *) Support for policyConstraints certificate extension.
611 *) Support for policyMappings certificate extension.
614 *) Make sure the default DSA_METHOD implementation only uses its
615 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
616 and change its own handlers to be NULL so as to remove unnecessary
617 indirection. This lets alternative implementations fallback to the
618 default implementation more easily.
621 *) Support for directoryName in GeneralName related extensions
625 *) Make it possible to link applications using Makefile.shared.
626 Make that possible even when linking against static libraries!
629 *) Support for single pass processing for S/MIME signing. This now
630 means that S/MIME signing can be done from a pipe, in addition
631 cleartext signing (multipart/signed type) is effectively streaming
632 and the signed data does not need to be all held in memory.
634 This is done with a new flag PKCS7_STREAM. When this flag is set
635 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
636 is done after the data is output (and digests calculated) in
640 *) Add full support for -rpath/-R, both in shared libraries and
641 applications, at least on the platforms where it's known how
645 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
646 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
647 will now compute a table of multiples of the generator that
648 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
649 faster (notably in the case of a single point multiplication,
651 [Nils Larsch, Bodo Moeller]
653 *) IPv6 support for certificate extensions. The various extensions
654 which use the IP:a.b.c.d can now take IPv6 addresses using the
655 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
659 *) Added an ENGINE that implements RSA by performing private key
660 exponentiations with the GMP library. The conversions to and from
661 GMP's mpz_t format aren't optimised nor are any montgomery forms
662 cached, and on x86 it appears OpenSSL's own performance has caught up.
663 However there are likely to be other architectures where GMP could
664 provide a boost. This ENGINE is not built in by default, but it can be
665 specified at Configure time and should be accompanied by the necessary
666 linker additions, eg;
667 ./config -DOPENSSL_USE_GMP -lgmp
670 *) "openssl engine" will not display ENGINE/DSO load failure errors when
671 testing availability of engines with "-t" - the old behaviour is
672 produced by increasing the feature's verbosity with "-tt".
675 *) ECDSA routines: under certain error conditions uninitialized BN objects
676 could be freed. Solution: make sure initialization is performed early
677 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
681 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
682 and DH_METHOD (eg. by ENGINE implementations) to override the normal
683 software implementations. For DSA and DH, parameter generation can
684 also be overriden by providing the appropriate method callbacks.
687 *) Change the "progress" mechanism used in key-generation and
688 primality testing to functions that take a new BN_GENCB pointer in
689 place of callback/argument pairs. The new API functions have "_ex"
690 postfixes and the older functions are reimplemented as wrappers for
691 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
692 declarations of the old functions to help (graceful) attempts to
693 migrate to the new functions. Also, the new key-generation API
694 functions operate on a caller-supplied key-structure and return
695 success/failure rather than returning a key or NULL - this is to
696 help make "keygen" another member function of RSA_METHOD etc.
698 Example for using the new callback interface:
700 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
704 BN_GENCB_set(&my_cb, my_callback, my_arg);
706 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
707 /* For the meaning of a, b in calls to my_callback(), see the
708 * documentation of the function that calls the callback.
709 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
710 * my_callback should return 1 if it wants BN_is_prime_ex()
711 * to continue, or 0 to stop.
716 *) Change the ZLIB compression method to be stateful, and make it
717 available to TLS with the number defined in
718 draft-ietf-tls-compression-04.txt.
721 *) Add the ASN.1 structures and functions for CertificatePair, which
722 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
724 CertificatePair ::= SEQUENCE {
725 forward [0] Certificate OPTIONAL,
726 reverse [1] Certificate OPTIONAL,
727 -- at least one of the pair shall be present -- }
729 Also implement the PEM functions to read and write certificate
730 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
732 This needed to be defined, mostly for the sake of the LDAP
733 attribute crossCertificatePair, but may prove useful elsewhere as
737 *) Make it possible to inhibit symlinking of shared libraries in
738 Makefile.shared, for Cygwin's sake.
741 *) Extend the BIGNUM API by creating a function
742 void BN_set_negative(BIGNUM *a, int neg);
743 and a macro that behave like
744 int BN_is_negative(const BIGNUM *a);
746 to avoid the need to access 'a->neg' directly in applications.
749 *) Implement fast modular reduction for pseudo-Mersenne primes
750 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
751 EC_GROUP_new_curve_GFp() will now automatically use this
753 [Nils Larsch <nla@trustcenter.de>]
755 *) Add new lock type (CRYPTO_LOCK_BN).
758 *) Change the ENGINE framework to automatically load engines
759 dynamically from specific directories unless they could be
760 found to already be built in or loaded. Move all the
761 current engines except for the cryptodev one to a new
763 The engines in engines/ are built as shared libraries if
764 the "shared" options was given to ./Configure or ./config.
765 Otherwise, they are inserted in libcrypto.a.
766 /usr/local/ssl/engines is the default directory for dynamic
767 engines, but that can be overriden at configure time through
768 the usual use of --prefix and/or --openssldir, and at run
769 time with the environment variable OPENSSL_ENGINES.
770 [Geoff Thorpe and Richard Levitte]
772 *) Add Makefile.shared, a helper makefile to build shared
773 libraries. Addapt Makefile.org.
776 *) Add version info to Win32 DLLs.
777 [Peter 'Luna' Runestig" <peter@runestig.com>]
779 *) Add new 'medium level' PKCS#12 API. Certificates and keys
780 can be added using this API to created arbitrary PKCS#12
781 files while avoiding the low level API.
783 New options to PKCS12_create(), key or cert can be NULL and
784 will then be omitted from the output file. The encryption
785 algorithm NIDs can be set to -1 for no encryption, the mac
786 iteration count can be set to 0 to omit the mac.
788 Enhance pkcs12 utility by making the -nokeys and -nocerts
789 options work when creating a PKCS#12 file. New option -nomac
790 to omit the mac, NONE can be set for an encryption algorithm.
791 New code is modified to use the enhanced PKCS12_create()
792 instead of the low level API.
795 *) Extend ASN1 encoder to support indefinite length constructed
796 encoding. This can output sequences tags and octet strings in
797 this form. Modify pk7_asn1.c to support indefinite length
798 encoding. This is experimental and needs additional code to
799 be useful, such as an ASN1 bio and some enhanced streaming
802 Extend template encode functionality so that tagging is passed
803 down to the template encoder.
806 *) Let 'openssl req' fail if an argument to '-newkey' is not
807 recognized instead of using RSA as a default.
810 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
811 As these are not official, they are not included in "ALL";
812 the "ECCdraft" ciphersuite group alias can be used to select them.
813 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
815 *) Add ECDH engine support.
816 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
818 *) Add ECDH in new directory crypto/ecdh/.
819 [Douglas Stebila (Sun Microsystems Laboratories)]
821 *) Let BN_rand_range() abort with an error after 100 iterations
822 without success (which indicates a broken PRNG).
825 *) Change BN_mod_sqrt() so that it verifies that the input value
826 is really the square of the return value. (Previously,
827 BN_mod_sqrt would show GIGO behaviour.)
830 *) Add named elliptic curves over binary fields from X9.62, SECG,
831 and WAP/WTLS; add OIDs that were still missing.
833 [Sheueling Chang Shantz and Douglas Stebila
834 (Sun Microsystems Laboratories)]
836 *) Extend the EC library for elliptic curves over binary fields
837 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
840 EC_GF2m_simple_method
844 EC_GROUP_new_curve_GF2m
845 EC_GROUP_set_curve_GF2m
846 EC_GROUP_get_curve_GF2m
847 EC_POINT_set_affine_coordinates_GF2m
848 EC_POINT_get_affine_coordinates_GF2m
849 EC_POINT_set_compressed_coordinates_GF2m
851 Point compression for binary fields is disabled by default for
852 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
855 As binary polynomials are represented as BIGNUMs, various members
856 of the EC_GROUP and EC_POINT data structures can be shared
857 between the implementations for prime fields and binary fields;
858 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
859 are essentially identical to their ..._GFp counterparts.
860 (For simplicity, the '..._GFp' prefix has been dropped from
861 various internal method names.)
863 An internal 'field_div' method (similar to 'field_mul' and
864 'field_sqr') has been added; this is used only for binary fields.
866 [Sheueling Chang Shantz and Douglas Stebila
867 (Sun Microsystems Laboratories)]
869 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
870 through methods ('mul', 'precompute_mult').
872 The generic implementations (now internally called 'ec_wNAF_mul'
873 and 'ec_wNAF_precomputed_mult') remain the default if these
874 methods are undefined.
876 [Sheueling Chang Shantz and Douglas Stebila
877 (Sun Microsystems Laboratories)]
879 *) New function EC_GROUP_get_degree, which is defined through
880 EC_METHOD. For curves over prime fields, this returns the bit
881 length of the modulus.
883 [Sheueling Chang Shantz and Douglas Stebila
884 (Sun Microsystems Laboratories)]
886 *) New functions EC_GROUP_dup, EC_POINT_dup.
887 (These simply call ..._new and ..._copy).
889 [Sheueling Chang Shantz and Douglas Stebila
890 (Sun Microsystems Laboratories)]
892 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
893 Polynomials are represented as BIGNUMs (where the sign bit is not
894 used) in the following functions [macros]:
897 BN_GF2m_sub [= BN_GF2m_add]
898 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
899 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
900 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
902 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
903 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
904 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
905 BN_GF2m_cmp [= BN_ucmp]
907 (Note that only the 'mod' functions are actually for fields GF(2^m).
908 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
910 For some functions, an the irreducible polynomial defining a
911 field can be given as an 'unsigned int[]' with strictly
912 decreasing elements giving the indices of those bits that are set;
913 i.e., p[] represents the polynomial
914 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
916 p[0] > p[1] > ... > p[k] = 0.
917 This applies to the following functions:
922 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
923 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
926 BN_GF2m_mod_solve_quad_arr
930 Conversion can be performed by the following functions:
935 bntest.c has additional tests for binary polynomial arithmetic.
937 Two implementations for BN_GF2m_mod_div() are available.
938 The default algorithm simply uses BN_GF2m_mod_inv() and
939 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
940 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
941 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
943 [Sheueling Chang Shantz and Douglas Stebila
944 (Sun Microsystems Laboratories)]
946 *) Add new error code 'ERR_R_DISABLED' that can be used when some
947 functionality is disabled at compile-time.
948 [Douglas Stebila <douglas.stebila@sun.com>]
950 *) Change default behaviour of 'openssl asn1parse' so that more
951 information is visible when viewing, e.g., a certificate:
953 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
954 mode the content of non-printable OCTET STRINGs is output in a
955 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
956 avoid the appearance of a printable string.
957 [Nils Larsch <nla@trustcenter.de>]
959 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
961 EC_GROUP_set_asn1_flag()
962 EC_GROUP_get_asn1_flag()
963 EC_GROUP_set_point_conversion_form()
964 EC_GROUP_get_point_conversion_form()
965 These control ASN1 encoding details:
966 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
967 has been set to OPENSSL_EC_NAMED_CURVE.
968 - Points are encoded in uncompressed form by default; options for
969 asn1_for are as for point2oct, namely
970 POINT_CONVERSION_COMPRESSED
971 POINT_CONVERSION_UNCOMPRESSED
972 POINT_CONVERSION_HYBRID
974 Also add 'seed' and 'seed_len' members to EC_GROUP with access
978 EC_GROUP_get_seed_len()
979 This is used only for ASN1 purposes (so far).
980 [Nils Larsch <nla@trustcenter.de>]
982 *) Add 'field_type' member to EC_METHOD, which holds the NID
983 of the appropriate field type OID. The new function
984 EC_METHOD_get_field_type() returns this value.
985 [Nils Larsch <nla@trustcenter.de>]
992 providing useful interfaces to EC_POINT_point2oct() and
993 EC_POINT_oct2point().
994 [Nils Larsch <nla@trustcenter.de>]
996 *) Change internals of the EC library so that the functions
997 EC_GROUP_set_generator()
998 EC_GROUP_get_generator()
1000 EC_GROUP_get_cofactor()
1001 are implemented directly in crypto/ec/ec_lib.c and not dispatched
1002 to methods, which would lead to unnecessary code duplication when
1003 adding different types of curves.
1004 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
1006 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
1007 arithmetic, and such that modified wNAFs are generated
1008 (which avoid length expansion in many cases).
1011 *) Add a function EC_GROUP_check_discriminant() (defined via
1012 EC_METHOD) that verifies that the curve discriminant is non-zero.
1014 Add a function EC_GROUP_check() that makes some sanity tests
1015 on a EC_GROUP, its generator and order. This includes
1016 EC_GROUP_check_discriminant().
1017 [Nils Larsch <nla@trustcenter.de>]
1019 *) Add ECDSA in new directory crypto/ecdsa/.
1021 Add applications 'openssl ecparam' and 'openssl ecdsa'
1022 (these are based on 'openssl dsaparam' and 'openssl dsa').
1024 ECDSA support is also included in various other files across the
1025 library. Most notably,
1026 - 'openssl req' now has a '-newkey ecdsa:file' option;
1027 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
1028 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
1029 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
1030 them suitable for ECDSA where domain parameters must be
1031 extracted before the specific public key;
1032 - ECDSA engine support has been added.
1033 [Nils Larsch <nla@trustcenter.de>]
1035 *) Include some named elliptic curves, and add OIDs from X9.62,
1036 SECG, and WAP/WTLS. Each curve can be obtained from the new
1038 EC_GROUP_new_by_curve_name(),
1039 and the list of available named curves can be obtained with
1040 EC_get_builtin_curves().
1041 Also add a 'curve_name' member to EC_GROUP objects, which can be
1043 EC_GROUP_set_curve_name()
1044 EC_GROUP_get_curve_name()
1045 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
1047 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
1048 was actually never needed) and in BN_mul(). The removal in BN_mul()
1049 required a small change in bn_mul_part_recursive() and the addition
1050 of the functions bn_cmp_part_words(), bn_sub_part_words() and
1051 bn_add_part_words(), which do the same thing as bn_cmp_words(),
1052 bn_sub_words() and bn_add_words() except they take arrays with
1056 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
1058 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
1059 The value now differs depending on if you build for FIPS or not.
1060 BEWARE! A program linked with a shared FIPSed libcrypto can't be
1061 safely run with a non-FIPSed libcrypto, as it may crash because of
1062 the difference induced by this change.
1065 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
1067 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
1068 (part of SSL_OP_ALL). This option used to disable the
1069 countermeasure against man-in-the-middle protocol-version
1070 rollback in the SSL 2.0 server implementation, which is a bad
1071 idea. (CVE-2005-2969)
1073 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
1074 for Information Security, National Institute of Advanced Industrial
1075 Science and Technology [AIST], Japan)]
1077 *) Minimal support for X9.31 signatures and PSS padding modes. This is
1078 mainly for FIPS compliance and not fully integrated at this stage.
1081 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
1082 the exponentiation using a fixed-length exponent. (Otherwise,
1083 the information leaked through timing could expose the secret key
1084 after many signatures; cf. Bleichenbacher's attack on DSA with
1088 *) Make a new fixed-window mod_exp implementation the default for
1089 RSA, DSA, and DH private-key operations so that the sequence of
1090 squares and multiplies and the memory access pattern are
1091 independent of the particular secret key. This will mitigate
1092 cache-timing and potential related attacks.
1094 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
1095 and this is automatically used by BN_mod_exp_mont() if the new flag
1096 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
1097 will use this BN flag for private exponents unless the flag
1098 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
1099 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
1101 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
1103 *) Change the client implementation for SSLv23_method() and
1104 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
1105 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
1106 (Previously, the SSL 2.0 backwards compatible Client Hello
1107 message format would be used even with SSL_OP_NO_SSLv2.)
1110 *) Add support for smime-type MIME parameter in S/MIME messages which some
1114 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
1115 a threadsafe manner. Modify rsa code to use new function and add calls
1116 to dsa and dh code (which had race conditions before).
1119 *) Include the fixed error library code in the C error file definitions
1120 instead of fixing them up at runtime. This keeps the error code
1121 structures constant.
1124 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
1126 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
1129 *) Fixes for newer kerberos headers. NB: the casts are needed because
1130 the 'length' field is signed on one version and unsigned on another
1131 with no (?) obvious way to tell the difference, without these VC++
1132 complains. Also the "definition" of FAR (blank) is no longer included
1133 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
1134 some needed definitions.
1137 *) Undo Cygwin change.
1140 *) Added support for proxy certificates according to RFC 3820.
1141 Because they may be a security thread to unaware applications,
1142 they must be explicitely allowed in run-time. See
1143 docs/HOWTO/proxy_certificates.txt for further information.
1146 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
1148 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
1149 server and client random values. Previously
1150 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
1151 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
1153 This change has negligible security impact because:
1155 1. Server and client random values still have 24 bytes of pseudo random
1158 2. Server and client random values are sent in the clear in the initial
1161 3. The master secret is derived using the premaster secret (48 bytes in
1162 size for static RSA ciphersuites) as well as client server and random
1165 The OpenSSL team would like to thank the UK NISCC for bringing this issue
1168 [Stephen Henson, reported by UK NISCC]
1170 *) Use Windows randomness collection on Cygwin.
1173 *) Fix hang in EGD/PRNGD query when communication socket is closed
1174 prematurely by EGD/PRNGD.
1175 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
1177 *) Prompt for pass phrases when appropriate for PKCS12 input format.
1180 *) Back-port of selected performance improvements from development
1181 branch, as well as improved support for PowerPC platforms.
1184 *) Add lots of checks for memory allocation failure, error codes to indicate
1185 failure and freeing up memory if a failure occurs.
1186 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
1188 *) Add new -passin argument to dgst.
1191 *) Perform some character comparisons of different types in X509_NAME_cmp:
1192 this is needed for some certificates that reencode DNs into UTF8Strings
1193 (in violation of RFC3280) and can't or wont issue name rollover
1197 *) Make an explicit check during certificate validation to see that
1198 the CA setting in each certificate on the chain is correct. As a
1199 side effect always do the following basic checks on extensions,
1200 not just when there's an associated purpose to the check:
1202 - if there is an unhandled critical extension (unless the user
1203 has chosen to ignore this fault)
1204 - if the path length has been exceeded (if one is set at all)
1205 - that certain extensions fit the associated purpose (if one has
1209 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
1211 *) Avoid a race condition when CRLs are checked in a multi threaded
1212 environment. This would happen due to the reordering of the revoked
1213 entries during signature checking and serial number lookup. Now the
1214 encoding is cached and the serial number sort performed under a lock.
1215 Add new STACK function sk_is_sorted().
1218 *) Add Delta CRL to the extension code.
1221 *) Various fixes to s3_pkt.c so alerts are sent properly.
1222 [David Holmes <d.holmes@f5.com>]
1224 *) Reduce the chances of duplicate issuer name and serial numbers (in
1225 violation of RFC3280) using the OpenSSL certificate creation utilities.
1226 This is done by creating a random 64 bit value for the initial serial
1227 number when a serial number file is created or when a self signed
1228 certificate is created using 'openssl req -x509'. The initial serial
1229 number file is created using 'openssl x509 -next_serial' in CA.pl
1230 rather than being initialized to 1.
1233 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
1235 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
1236 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
1237 [Joe Orton, Steve Henson]
1239 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
1241 [Joe Orton, Steve Henson]
1243 *) Make it possible to have multiple active certificates with the same
1244 subject in the CA index file. This is done only if the keyword
1245 'unique_subject' is set to 'no' in the main CA section (default
1246 if 'CA_default') of the configuration file. The value is saved
1247 with the database itself in a separate index attribute file,
1248 named like the index file with '.attr' appended to the name.
1251 *) X509 verify fixes. Disable broken certificate workarounds when
1252 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
1253 keyUsage extension present. Don't accept CRLs with unhandled critical
1254 extensions: since verify currently doesn't process CRL extensions this
1255 rejects a CRL with *any* critical extensions. Add new verify error codes
1259 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
1260 A clarification of RFC2560 will require the use of OCTET STRINGs and
1261 some implementations cannot handle the current raw format. Since OpenSSL
1262 copies and compares OCSP nonces as opaque blobs without any attempt at
1263 parsing them this should not create any compatibility issues.
1266 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
1267 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
1268 this HMAC (and other) operations are several times slower than OpenSSL
1272 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
1273 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1275 *) Use the correct content when signing type "other".
1278 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
1280 *) Fix various bugs revealed by running the NISCC test suite:
1282 Stop out of bounds reads in the ASN1 code when presented with
1283 invalid tags (CVE-2003-0543 and CVE-2003-0544).
1285 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
1287 If verify callback ignores invalid public key errors don't try to check
1288 certificate signature with the NULL public key.
1292 *) New -ignore_err option in ocsp application to stop the server
1293 exiting on the first error in a request.
1296 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
1297 if the server requested one: as stated in TLS 1.0 and SSL 3.0
1301 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
1302 extra data after the compression methods not only for TLS 1.0
1303 but also for SSL 3.0 (as required by the specification).
1304 [Bodo Moeller; problem pointed out by Matthias Loepfe]
1306 *) Change X509_certificate_type() to mark the key as exported/exportable
1307 when it's 512 *bits* long, not 512 bytes.
1310 *) Change AES_cbc_encrypt() so it outputs exact multiple of
1311 blocks during encryption.
1314 *) Various fixes to base64 BIO and non blocking I/O. On write
1315 flushes were not handled properly if the BIO retried. On read
1316 data was not being buffered properly and had various logic bugs.
1317 This also affects blocking I/O when the data being decoded is a
1321 *) Various S/MIME bugfixes and compatibility changes:
1322 output correct application/pkcs7 MIME type if
1323 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
1324 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
1325 of files as .eml work). Correctly handle very long lines in MIME
1329 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
1331 *) Countermeasure against the Klima-Pokorny-Rosa extension of
1332 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
1333 a protocol version number mismatch like a decryption error
1334 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
1337 *) Turn on RSA blinding by default in the default implementation
1338 to avoid a timing attack. Applications that don't want it can call
1339 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
1340 They would be ill-advised to do so in most cases.
1341 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
1343 *) Change RSA blinding code so that it works when the PRNG is not
1344 seeded (in this case, the secret RSA exponent is abused as
1345 an unpredictable seed -- if it is not unpredictable, there
1346 is no point in blinding anyway). Make RSA blinding thread-safe
1347 by remembering the creator's thread ID in rsa->blinding and
1348 having all other threads use local one-time blinding factors
1349 (this requires more computation than sharing rsa->blinding, but
1350 avoids excessive locking; and if an RSA object is not shared
1351 between threads, blinding will still be very fast).
1354 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
1355 ENGINE as defaults for all supported algorithms irrespective of
1356 the 'flags' parameter. 'flags' is now honoured, so applications
1357 should make sure they are passing it correctly.
1360 *) Target "mingw" now allows native Windows code to be generated in
1361 the Cygwin environment as well as with the MinGW compiler.
1364 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
1366 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
1367 via timing by performing a MAC computation even if incorrrect
1368 block cipher padding has been found. This is a countermeasure
1369 against active attacks where the attacker has to distinguish
1370 between bad padding and a MAC verification error. (CVE-2003-0078)
1372 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
1373 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
1374 Martin Vuagnoux (EPFL, Ilion)]
1376 *) Make the no-err option work as intended. The intention with no-err
1377 is not to have the whole error stack handling routines removed from
1378 libcrypto, it's only intended to remove all the function name and
1379 reason texts, thereby removing some of the footprint that may not
1380 be interesting if those errors aren't displayed anyway.
1382 NOTE: it's still possible for any application or module to have it's
1383 own set of error texts inserted. The routines are there, just not
1384 used by default when no-err is given.
1387 *) Add support for FreeBSD on IA64.
1388 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
1390 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
1391 Kerberos function mit_des_cbc_cksum(). Before this change,
1392 the value returned by DES_cbc_cksum() was like the one from
1393 mit_des_cbc_cksum(), except the bytes were swapped.
1394 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
1396 *) Allow an application to disable the automatic SSL chain building.
1397 Before this a rather primitive chain build was always performed in
1398 ssl3_output_cert_chain(): an application had no way to send the
1399 correct chain if the automatic operation produced an incorrect result.
1401 Now the chain builder is disabled if either:
1403 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
1405 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
1407 The reasoning behind this is that an application would not want the
1408 auto chain building to take place if extra chain certificates are
1409 present and it might also want a means of sending no additional
1410 certificates (for example the chain has two certificates and the
1414 *) Add the possibility to build without the ENGINE framework.
1415 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1417 *) Under Win32 gmtime() can return NULL: check return value in
1418 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
1421 *) DSA routines: under certain error conditions uninitialized BN objects
1422 could be freed. Solution: make sure initialization is performed early
1423 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
1424 Nils Larsch <nla@trustcenter.de> via PR#459)
1427 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
1428 checked on reconnect on the client side, therefore session resumption
1429 could still fail with a "ssl session id is different" error. This
1430 behaviour is masked when SSL_OP_ALL is used due to
1431 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
1432 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1433 followup to PR #377.
1436 *) IA-32 assembler support enhancements: unified ELF targets, support
1437 for SCO/Caldera platforms, fix for Cygwin shared build.
1440 *) Add support for FreeBSD on sparc64. As a consequence, support for
1441 FreeBSD on non-x86 processors is separate from x86 processors on
1442 the config script, much like the NetBSD support.
1443 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
1445 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
1447 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
1450 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
1451 code (06) was taken as the first octet of the session ID and the last
1452 octet was ignored consequently. As a result SSLv2 client side session
1453 caching could not have worked due to the session ID mismatch between
1455 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1459 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
1460 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
1464 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
1465 seems that in spite of existing for more than a year, many application
1466 author have done nothing to provide the necessary callbacks, which
1467 means that this particular engine will not work properly anywhere.
1468 This is a very unfortunate situation which forces us, in the name
1469 of usability, to give the hw_ncipher.c a static lock, which is part
1471 NOTE: This is for the 0.9.7 series ONLY. This hack will never
1472 appear in 0.9.8 or later. We EXPECT application authors to have
1473 dealt properly with this when 0.9.8 is released (unless we actually
1474 make such changes in the libcrypto locking code that changes will
1475 have to be made anyway).
1478 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
1479 octets have been read, EOF or an error occurs. Without this change
1480 some truncated ASN1 structures will not produce an error.
1483 *) Disable Heimdal support, since it hasn't been fully implemented.
1484 Still give the possibility to force the use of Heimdal, but with
1485 warnings and a request that patches get sent to openssl-dev.
1488 *) Add the VC-CE target, introduce the WINCE sysname, and add
1489 INSTALL.WCE and appropriate conditionals to make it build.
1490 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1492 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
1493 cygssl-x.y.z.dll, where x, y and z are the major, minor and
1494 edit numbers of the version.
1495 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
1497 *) Introduce safe string copy and catenation functions
1498 (BUF_strlcpy() and BUF_strlcat()).
1499 [Ben Laurie (CHATS) and Richard Levitte]
1501 *) Avoid using fixed-size buffers for one-line DNs.
1502 [Ben Laurie (CHATS)]
1504 *) Add BUF_MEM_grow_clean() to avoid information leakage when
1505 resizing buffers containing secrets, and use where appropriate.
1506 [Ben Laurie (CHATS)]
1508 *) Avoid using fixed size buffers for configuration file location.
1509 [Ben Laurie (CHATS)]
1511 *) Avoid filename truncation for various CA files.
1512 [Ben Laurie (CHATS)]
1514 *) Use sizeof in preference to magic numbers.
1515 [Ben Laurie (CHATS)]
1517 *) Avoid filename truncation in cert requests.
1518 [Ben Laurie (CHATS)]
1520 *) Add assertions to check for (supposedly impossible) buffer
1522 [Ben Laurie (CHATS)]
1524 *) Don't cache truncated DNS entries in the local cache (this could
1525 potentially lead to a spoofing attack).
1526 [Ben Laurie (CHATS)]
1528 *) Fix various buffers to be large enough for hex/decimal
1529 representations in a platform independent manner.
1530 [Ben Laurie (CHATS)]
1532 *) Add CRYPTO_realloc_clean() to avoid information leakage when
1533 resizing buffers containing secrets, and use where appropriate.
1534 [Ben Laurie (CHATS)]
1536 *) Add BIO_indent() to avoid much slightly worrying code to do
1538 [Ben Laurie (CHATS)]
1540 *) Convert sprintf()/BIO_puts() to BIO_printf().
1541 [Ben Laurie (CHATS)]
1543 *) buffer_gets() could terminate with the buffer only half
1545 [Ben Laurie (CHATS)]
1547 *) Add assertions to prevent user-supplied crypto functions from
1548 overflowing internal buffers by having large block sizes, etc.
1549 [Ben Laurie (CHATS)]
1551 *) New OPENSSL_assert() macro (similar to assert(), but enabled
1553 [Ben Laurie (CHATS)]
1555 *) Eliminate unused copy of key in RC4.
1556 [Ben Laurie (CHATS)]
1558 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
1559 [Ben Laurie (CHATS)]
1561 *) Fix off-by-one error in EGD path.
1562 [Ben Laurie (CHATS)]
1564 *) If RANDFILE path is too long, ignore instead of truncating.
1565 [Ben Laurie (CHATS)]
1567 *) Eliminate unused and incorrectly sized X.509 structure
1569 [Ben Laurie (CHATS)]
1571 *) Eliminate unused and dangerous function knumber().
1572 [Ben Laurie (CHATS)]
1574 *) Eliminate unused and dangerous structure, KSSL_ERR.
1575 [Ben Laurie (CHATS)]
1577 *) Protect against overlong session ID context length in an encoded
1578 session object. Since these are local, this does not appear to be
1580 [Ben Laurie (CHATS)]
1582 *) Change from security patch (see 0.9.6e below) that did not affect
1583 the 0.9.6 release series:
1585 Remote buffer overflow in SSL3 protocol - an attacker could
1586 supply an oversized master key in Kerberos-enabled versions.
1588 [Ben Laurie (CHATS)]
1590 *) Change the SSL kerb5 codes to match RFC 2712.
1593 *) Make -nameopt work fully for req and add -reqopt switch.
1594 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
1596 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
1597 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
1599 *) Make sure tests can be performed even if the corresponding algorithms
1600 have been removed entirely. This was also the last step to make
1601 OpenSSL compilable with DJGPP under all reasonable conditions.
1602 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
1604 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
1605 to allow version independent disabling of normally unselected ciphers,
1606 which may be activated as a side-effect of selecting a single cipher.
1608 (E.g., cipher list string "RSA" enables ciphersuites that are left
1609 out of "ALL" because they do not provide symmetric encryption.
1610 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
1611 [Lutz Jaenicke, Bodo Moeller]
1613 *) Add appropriate support for separate platform-dependent build
1614 directories. The recommended way to make a platform-dependent
1615 build directory is the following (tested on Linux), maybe with
1618 # Place yourself outside of the OpenSSL source tree. In
1619 # this example, the environment variable OPENSSL_SOURCE
1620 # is assumed to contain the absolute OpenSSL source directory.
1621 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
1622 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
1623 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
1624 mkdir -p `dirname $F`
1625 ln -s $OPENSSL_SOURCE/$F $F
1628 To be absolutely sure not to disturb the source tree, a "make clean"
1629 is a good thing. If it isn't successfull, don't worry about it,
1630 it probably means the source directory is very clean.
1633 *) Make sure any ENGINE control commands make local copies of string
1634 pointers passed to them whenever necessary. Otherwise it is possible
1635 the caller may have overwritten (or deallocated) the original string
1636 data when a later ENGINE operation tries to use the stored values.
1637 [Götz Babin-Ebell <babinebell@trustcenter.de>]
1639 *) Improve diagnostics in file reading and command-line digests.
1640 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
1642 *) Add AES modes CFB and OFB to the object database. Correct an
1643 error in AES-CFB decryption.
1646 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
1647 allows existing EVP_CIPHER_CTX structures to be reused after
1648 calling EVP_*Final(). This behaviour is used by encryption
1649 BIOs and some applications. This has the side effect that
1650 applications must explicitly clean up cipher contexts with
1651 EVP_CIPHER_CTX_cleanup() or they will leak memory.
1654 *) Check the values of dna and dnb in bn_mul_recursive before calling
1655 bn_mul_comba (a non zero value means the a or b arrays do not contain
1656 n2 elements) and fallback to bn_mul_normal if either is not zero.
1659 *) Fix escaping of non-ASCII characters when using the -subj option
1660 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
1663 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
1664 form for "surname", serialNumber has no short form.
1665 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
1666 therefore remove "mail" short name for "internet 7".
1667 The OID for unique identifiers in X509 certificates is
1668 x500UniqueIdentifier, not uniqueIdentifier.
1669 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
1672 *) Add an "init" command to the ENGINE config module and auto initialize
1673 ENGINEs. Without any "init" command the ENGINE will be initialized
1674 after all ctrl commands have been executed on it. If init=1 the
1675 ENGINE is initailized at that point (ctrls before that point are run
1676 on the uninitialized ENGINE and after on the initialized one). If
1677 init=0 then the ENGINE will not be iniatialized at all.
1680 *) Fix the 'app_verify_callback' interface so that the user-defined
1681 argument is actually passed to the callback: In the
1682 SSL_CTX_set_cert_verify_callback() prototype, the callback
1683 declaration has been changed from
1686 int (*cb)(X509_STORE_CTX *,void *);
1687 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
1688 i=s->ctx->app_verify_callback(&ctx)
1689 has been changed into
1690 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
1692 To update applications using SSL_CTX_set_cert_verify_callback(),
1693 a dummy argument can be added to their callback functions.
1694 [D. K. Smetters <smetters@parc.xerox.com>]
1696 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
1697 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
1699 *) Add and OPENSSL_LOAD_CONF define which will cause
1700 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
1701 This allows older applications to transparently support certain
1702 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
1703 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
1704 load the config file and OPENSSL_add_all_algorithms_conf() which will
1705 always load it have also been added.
1708 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
1709 Adjust NIDs and EVP layer.
1710 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1712 *) Config modules support in openssl utility.
1714 Most commands now load modules from the config file,
1715 though in a few (such as version) this isn't done
1716 because it couldn't be used for anything.
1718 In the case of ca and req the config file used is
1719 the same as the utility itself: that is the -config
1720 command line option can be used to specify an
1724 *) Move default behaviour from OPENSSL_config(). If appname is NULL
1725 use "openssl_conf" if filename is NULL use default openssl config file.
1728 *) Add an argument to OPENSSL_config() to allow the use of an alternative
1729 config section name. Add a new flag to tolerate a missing config file
1730 and move code to CONF_modules_load_file().
1733 *) Support for crypto accelerator cards from Accelerated Encryption
1734 Processing, www.aep.ie. (Use engine 'aep')
1735 The support was copied from 0.9.6c [engine] and adapted/corrected
1736 to work with the new engine framework.
1737 [AEP Inc. and Richard Levitte]
1739 *) Support for SureWare crypto accelerator cards from Baltimore
1740 Technologies. (Use engine 'sureware')
1741 The support was copied from 0.9.6c [engine] and adapted
1742 to work with the new engine framework.
1745 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
1746 make the newer ENGINE framework commands for the CHIL engine work.
1747 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
1749 *) Make it possible to produce shared libraries on ReliantUNIX.
1750 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
1752 *) Add the configuration target debug-linux-ppro.
1753 Make 'openssl rsa' use the general key loading routines
1754 implemented in apps.c, and make those routines able to
1755 handle the key format FORMAT_NETSCAPE and the variant
1757 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1759 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
1760 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1762 *) Add -keyform to rsautl, and document -engine.
1763 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
1765 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
1766 BIO_R_NO_SUCH_FILE error code rather than the generic
1767 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
1770 *) Add new functions
1772 ERR_peek_last_error_line
1773 ERR_peek_last_error_line_data.
1774 These are similar to
1777 ERR_peek_error_line_data,
1778 but report on the latest error recorded rather than the first one
1779 still in the error queue.
1780 [Ben Laurie, Bodo Moeller]
1782 *) default_algorithms option in ENGINE config module. This allows things
1784 default_algorithms = ALL
1785 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
1788 *) Prelminary ENGINE config module.
1791 *) New experimental application configuration code.
1794 *) Change the AES code to follow the same name structure as all other
1795 symmetric ciphers, and behave the same way. Move everything to
1796 the directory crypto/aes, thereby obsoleting crypto/rijndael.
1797 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1799 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
1800 [Ben Laurie and Theo de Raadt]
1802 *) Add option to output public keys in req command.
1803 [Massimiliano Pala madwolf@openca.org]
1805 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
1806 (up to about 10% better than before for P-192 and P-224).
1809 *) New functions/macros
1811 SSL_CTX_set_msg_callback(ctx, cb)
1812 SSL_CTX_set_msg_callback_arg(ctx, arg)
1813 SSL_set_msg_callback(ssl, cb)
1814 SSL_set_msg_callback_arg(ssl, arg)
1816 to request calling a callback function
1818 void cb(int write_p, int version, int content_type,
1819 const void *buf, size_t len, SSL *ssl, void *arg)
1821 whenever a protocol message has been completely received
1822 (write_p == 0) or sent (write_p == 1). Here 'version' is the
1823 protocol version according to which the SSL library interprets
1824 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
1825 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
1826 the content type as defined in the SSL 3.0/TLS 1.0 protocol
1827 specification (change_cipher_spec(20), alert(21), handshake(22)).
1828 'buf' and 'len' point to the actual message, 'ssl' to the
1829 SSL object, and 'arg' is the application-defined value set by
1830 SSL[_CTX]_set_msg_callback_arg().
1832 'openssl s_client' and 'openssl s_server' have new '-msg' options
1833 to enable a callback that displays all protocol messages.
1836 *) Change the shared library support so shared libraries are built as
1837 soon as the corresponding static library is finished, and thereby get
1838 openssl and the test programs linked against the shared library.
1839 This still only happens when the keyword "shard" has been given to
1840 the configuration scripts.
1842 NOTE: shared library support is still an experimental thing, and
1843 backward binary compatibility is still not guaranteed.
1844 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
1846 *) Add support for Subject Information Access extension.
1847 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1849 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
1850 additional bytes when new memory had to be allocated, not just
1851 when reusing an existing buffer.
1854 *) New command line and configuration option 'utf8' for the req command.
1855 This allows field values to be specified as UTF8 strings.
1858 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
1859 runs for the former and machine-readable output for the latter.
1862 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
1863 of the e-mail address in the DN (i.e., it will go into a certificate
1864 extension only). The new configuration file option 'email_in_dn = no'
1865 has the same effect.
1866 [Massimiliano Pala madwolf@openca.org]
1868 *) Change all functions with names starting with des_ to be starting
1869 with DES_ instead. Add wrappers that are compatible with libdes,
1870 but are named _ossl_old_des_*. Finally, add macros that map the
1871 des_* symbols to the corresponding _ossl_old_des_* if libdes
1872 compatibility is desired. If OpenSSL 0.9.6c compatibility is
1873 desired, the des_* symbols will be mapped to DES_*, with one
1876 Since we provide two compatibility mappings, the user needs to
1877 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
1878 compatibility is desired. The default (i.e., when that macro
1879 isn't defined) is OpenSSL 0.9.6c compatibility.
1881 There are also macros that enable and disable the support of old
1882 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
1883 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
1884 are defined, the default will apply: to support the old des routines.
1886 In either case, one must include openssl/des.h to get the correct
1887 definitions. Do not try to just include openssl/des_old.h, that
1890 NOTE: This is a major break of an old API into a new one. Software
1891 authors are encouraged to switch to the DES_ style functions. Some
1892 time in the future, des_old.h and the libdes compatibility functions
1893 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
1894 default), and then completely removed.
1897 *) Test for certificates which contain unsupported critical extensions.
1898 If such a certificate is found during a verify operation it is
1899 rejected by default: this behaviour can be overridden by either
1900 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
1901 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
1902 X509_supported_extension() has also been added which returns 1 if a
1903 particular extension is supported.
1906 *) Modify the behaviour of EVP cipher functions in similar way to digests
1907 to retain compatibility with existing code.
1910 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
1911 compatibility with existing code. In particular the 'ctx' parameter does
1912 not have to be to be initialized before the call to EVP_DigestInit() and
1913 it is tidied up after a call to EVP_DigestFinal(). New function
1914 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
1915 EVP_MD_CTX_copy() changed to not require the destination to be
1916 initialized valid and new function EVP_MD_CTX_copy_ex() added which
1917 requires the destination to be valid.
1919 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
1920 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
1923 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
1924 so that complete 'Handshake' protocol structures are kept in memory
1925 instead of overwriting 'msg_type' and 'length' with 'body' data.
1928 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
1929 [Massimo Santin via Richard Levitte]
1931 *) Major restructuring to the underlying ENGINE code. This includes
1932 reduction of linker bloat, separation of pure "ENGINE" manipulation
1933 (initialisation, etc) from functionality dealing with implementations
1934 of specific crypto iterfaces. This change also introduces integrated
1935 support for symmetric ciphers and digest implementations - so ENGINEs
1936 can now accelerate these by providing EVP_CIPHER and EVP_MD
1937 implementations of their own. This is detailed in crypto/engine/README
1938 as it couldn't be adequately described here. However, there are a few
1939 API changes worth noting - some RSA, DSA, DH, and RAND functions that
1940 were changed in the original introduction of ENGINE code have now
1941 reverted back - the hooking from this code to ENGINE is now a good
1942 deal more passive and at run-time, operations deal directly with
1943 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
1944 dereferencing through an ENGINE pointer any more. Also, the ENGINE
1945 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
1946 they were not being used by the framework as there is no concept of a
1947 BIGNUM_METHOD and they could not be generalised to the new
1948 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
1949 ENGINE_cpy() has been removed as it cannot be consistently defined in
1953 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
1956 *) Change mkdef.pl to sort symbols that get the same entry number,
1957 and make sure the automatically generated functions ERR_load_*
1958 become part of libeay.num as well.
1961 *) New function SSL_renegotiate_pending(). This returns true once
1962 renegotiation has been requested (either SSL_renegotiate() call
1963 or HelloRequest/ClientHello receveived from the peer) and becomes
1964 false once a handshake has been completed.
1965 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
1966 sends a HelloRequest, but does not ensure that a handshake takes
1967 place. SSL_renegotiate_pending() is useful for checking if the
1968 client has followed the request.)
1971 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
1972 By default, clients may request session resumption even during
1973 renegotiation (if session ID contexts permit); with this option,
1974 session resumption is possible only in the first handshake.
1976 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
1977 more bits available for options that should not be part of
1978 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
1981 *) Add some demos for certificate and certificate request creation.
1984 *) Make maximum certificate chain size accepted from the peer application
1985 settable (SSL*_get/set_max_cert_list()), as proposed by
1986 "Douglas E. Engert" <deengert@anl.gov>.
1989 *) Add support for shared libraries for Unixware-7
1990 (Boyd Lynn Gerber <gerberb@zenez.com>).
1993 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
1994 be done prior to destruction. Use this to unload error strings from
1995 ENGINEs that load their own error strings. NB: This adds two new API
1996 functions to "get" and "set" this destroy handler in an ENGINE.
1999 *) Alter all existing ENGINE implementations (except "openssl" and
2000 "openbsd") to dynamically instantiate their own error strings. This
2001 makes them more flexible to be built both as statically-linked ENGINEs
2002 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
2003 Also, add stub code to each that makes building them as self-contained
2004 shared-libraries easier (see README.ENGINE).
2007 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
2008 implementations into applications that are completely implemented in
2009 self-contained shared-libraries. The "dynamic" ENGINE exposes control
2010 commands that can be used to configure what shared-library to load and
2011 to control aspects of the way it is handled. Also, made an update to
2012 the README.ENGINE file that brings its information up-to-date and
2013 provides some information and instructions on the "dynamic" ENGINE
2014 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
2017 *) Make it possible to unload ranges of ERR strings with a new
2018 "ERR_unload_strings" function.
2021 *) Add a copy() function to EVP_MD.
2024 *) Make EVP_MD routines take a context pointer instead of just the
2025 md_data void pointer.
2028 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
2029 that the digest can only process a single chunk of data
2030 (typically because it is provided by a piece of
2031 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
2032 is only going to provide a single chunk of data, and hence the
2033 framework needn't accumulate the data for oneshot drivers.
2036 *) As with "ERR", make it possible to replace the underlying "ex_data"
2037 functions. This change also alters the storage and management of global
2038 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
2039 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
2040 index counters. The API functions that use this state have been changed
2041 to take a "class_index" rather than pointers to the class's local STACK
2042 and counter, and there is now an API function to dynamically create new
2043 classes. This centralisation allows us to (a) plug a lot of the
2044 thread-safety problems that existed, and (b) makes it possible to clean
2045 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
2046 such data would previously have always leaked in application code and
2047 workarounds were in place to make the memory debugging turn a blind eye
2048 to it. Application code that doesn't use this new function will still
2049 leak as before, but their memory debugging output will announce it now
2050 rather than letting it slide.
2052 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
2053 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
2054 has a return value to indicate success or failure.
2057 *) Make it possible to replace the underlying "ERR" functions such that the
2058 global state (2 LHASH tables and 2 locks) is only used by the "default"
2059 implementation. This change also adds two functions to "get" and "set"
2060 the implementation prior to it being automatically set the first time
2061 any other ERR function takes place. Ie. an application can call "get",
2062 pass the return value to a module it has just loaded, and that module
2063 can call its own "set" function using that value. This means the
2064 module's "ERR" operations will use (and modify) the error state in the
2065 application and not in its own statically linked copy of OpenSSL code.
2068 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
2069 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
2070 the operation, and provides a more encapsulated way for external code
2071 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
2072 to use these functions rather than manually incrementing the counts.
2074 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
2077 *) Add EVP test program.
2080 *) Add symmetric cipher support to ENGINE. Expect the API to change!
2083 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
2084 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
2085 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
2086 These allow a CRL to be built without having to access X509_CRL fields
2087 directly. Modify 'ca' application to use new functions.
2090 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
2091 bug workarounds. Rollback attack detection is a security feature.
2092 The problem will only arise on OpenSSL servers when TLSv1 is not
2093 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
2094 Software authors not wanting to support TLSv1 will have special reasons
2095 for their choice and can explicitly enable this option.
2096 [Bodo Moeller, Lutz Jaenicke]
2098 *) Rationalise EVP so it can be extended: don't include a union of
2099 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
2100 (similar to those existing for EVP_CIPHER_CTX).
2105 EVP_MD_CTX_init(&md); /* new function call */
2106 EVP_DigestInit(&md, EVP_sha1());
2107 EVP_DigestUpdate(&md, in, len);
2108 EVP_DigestFinal(&md, out, NULL);
2109 EVP_MD_CTX_cleanup(&md); /* new function call */
2113 *) Make DES key schedule conform to the usual scheme, as well as
2114 correcting its structure. This means that calls to DES functions
2115 now have to pass a pointer to a des_key_schedule instead of a
2116 plain des_key_schedule (which was actually always a pointer
2119 des_key_schedule ks;
2121 des_set_key_checked(..., &ks);
2122 des_ncbc_encrypt(..., &ks, ...);
2124 (Note that a later change renames 'des_...' into 'DES_...'.)
2127 *) Initial reduction of linker bloat: the use of some functions, such as
2128 PEM causes large amounts of unused functions to be linked in due to
2129 poor organisation. For example pem_all.c contains every PEM function
2130 which has a knock on effect of linking in large amounts of (unused)
2131 ASN1 code. Grouping together similar functions and splitting unrelated
2132 functions prevents this.
2135 *) Cleanup of EVP macros.
2138 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
2139 correct _ecb suffix.
2142 *) Add initial OCSP responder support to ocsp application. The
2143 revocation information is handled using the text based index
2144 use by the ca application. The responder can either handle
2145 requests generated internally, supplied in files (for example
2146 via a CGI script) or using an internal minimal server.
2149 *) Add configuration choices to get zlib compression for TLS.
2152 *) Changes to Kerberos SSL for RFC 2712 compliance:
2153 1. Implemented real KerberosWrapper, instead of just using
2154 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
2155 2. Implemented optional authenticator field of KerberosWrapper.
2157 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
2158 and authenticator structs; see crypto/krb5/.
2160 Generalized Kerberos calls to support multiple Kerberos libraries.
2161 [Vern Staats <staatsvr@asc.hpc.mil>,
2162 Jeffrey Altman <jaltman@columbia.edu>
2163 via Richard Levitte]
2165 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
2166 already does with RSA. testdsa.h now has 'priv_key/pub_key'
2167 values for each of the key sizes rather than having just
2168 parameters (and 'speed' generating keys each time).
2171 *) Speed up EVP routines.
2174 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
2175 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
2176 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
2177 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
2179 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
2180 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
2181 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
2184 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
2186 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
2189 *) Added the OS2-EMX target.
2190 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
2192 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
2193 to support NCONF routines in extension code. New function CONF_set_nconf()
2194 to allow functions which take an NCONF to also handle the old LHASH
2195 structure: this means that the old CONF compatible routines can be
2196 retained (in particular wrt extensions) without having to duplicate the
2197 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
2200 *) Enhance the general user interface with mechanisms for inner control
2201 and with possibilities to have yes/no kind of prompts.
2204 *) Change all calls to low level digest routines in the library and
2205 applications to use EVP. Add missing calls to HMAC_cleanup() and
2206 don't assume HMAC_CTX can be copied using memcpy().
2207 [Verdon Walker <VWalker@novell.com>, Steve Henson]
2209 *) Add the possibility to control engines through control names but with
2210 arbitrary arguments instead of just a string.
2211 Change the key loaders to take a UI_METHOD instead of a callback
2212 function pointer. NOTE: this breaks binary compatibility with earlier
2213 versions of OpenSSL [engine].
2214 Adapt the nCipher code for these new conditions and add a card insertion
2218 *) Enhance the general user interface with mechanisms to better support
2219 dialog box interfaces, application-defined prompts, the possibility
2220 to use defaults (for example default passwords from somewhere else)
2221 and interrupts/cancellations.
2224 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
2225 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
2228 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
2229 tidy up some unnecessarily weird code in 'sk_new()').
2230 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
2232 *) Change the key loading routines for ENGINEs to use the same kind
2233 callback (pem_password_cb) as all other routines that need this
2237 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
2238 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
2239 than this minimum value is recommended.
2242 *) New random seeder for OpenVMS, using the system process statistics
2243 that are easily reachable.
2246 *) Windows apparently can't transparently handle global
2247 variables defined in DLLs. Initialisations such as:
2249 const ASN1_ITEM *it = &ASN1_INTEGER_it;
2251 wont compile. This is used by the any applications that need to
2252 declare their own ASN1 modules. This was fixed by adding the option
2253 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
2254 needed for static libraries under Win32.
2257 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
2258 setting of purpose and trust fields. New X509_STORE trust and
2259 purpose functions and tidy up setting in other SSL functions.
2262 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
2263 structure. These are inherited by X509_STORE_CTX when it is
2264 initialised. This allows various defaults to be set in the
2265 X509_STORE structure (such as flags for CRL checking and custom
2266 purpose or trust settings) for functions which only use X509_STORE_CTX
2267 internally such as S/MIME.
2269 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
2270 trust settings if they are not set in X509_STORE. This allows X509_STORE
2271 purposes and trust (in S/MIME for example) to override any set by default.
2273 Add command line options for CRL checking to smime, s_client and s_server
2277 *) Initial CRL based revocation checking. If the CRL checking flag(s)
2278 are set then the CRL is looked up in the X509_STORE structure and
2279 its validity and signature checked, then if the certificate is found
2280 in the CRL the verify fails with a revoked error.
2282 Various new CRL related callbacks added to X509_STORE_CTX structure.
2284 Command line options added to 'verify' application to support this.
2286 This needs some additional work, such as being able to handle multiple
2287 CRLs with different times, extension based lookup (rather than just
2288 by subject name) and ultimately more complete V2 CRL extension
2292 *) Add a general user interface API (crypto/ui/). This is designed
2293 to replace things like des_read_password and friends (backward
2294 compatibility functions using this new API are provided).
2295 The purpose is to remove prompting functions from the DES code
2296 section as well as provide for prompting through dialog boxes in
2297 a window system and the like.
2300 *) Add "ex_data" support to ENGINE so implementations can add state at a
2301 per-structure level rather than having to store it globally.
2304 *) Make it possible for ENGINE structures to be copied when retrieved by
2305 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
2306 This causes the "original" ENGINE structure to act like a template,
2307 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
2308 operational state can be localised to each ENGINE structure, despite the
2309 fact they all share the same "methods". New ENGINE structures returned in
2310 this case have no functional references and the return value is the single
2311 structural reference. This matches the single structural reference returned
2312 by ENGINE_by_id() normally, when it is incremented on the pre-existing
2316 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
2317 needs to match any other type at all we need to manually clear the
2321 *) Changes to the "openssl engine" utility to include;
2322 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
2323 about an ENGINE's available control commands.
2324 - executing control commands from command line arguments using the
2325 '-pre' and '-post' switches. '-post' is only used if '-t' is
2326 specified and the ENGINE is successfully initialised. The syntax for
2327 the individual commands are colon-separated, for example;
2328 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
2331 *) New dynamic control command support for ENGINEs. ENGINEs can now
2332 declare their own commands (numbers), names (strings), descriptions,
2333 and input types for run-time discovery by calling applications. A
2334 subset of these commands are implicitly classed as "executable"
2335 depending on their input type, and only these can be invoked through
2336 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
2337 can be based on user input, config files, etc). The distinction is
2338 that "executable" commands cannot return anything other than a boolean
2339 result and can only support numeric or string input, whereas some
2340 discoverable commands may only be for direct use through
2341 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
2342 pointers, or other custom uses. The "executable" commands are to
2343 support parameterisations of ENGINE behaviour that can be
2344 unambiguously defined by ENGINEs and used consistently across any
2345 OpenSSL-based application. Commands have been added to all the
2346 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
2347 control over shared-library paths without source code alterations.
2350 *) Changed all ENGINE implementations to dynamically allocate their
2351 ENGINEs rather than declaring them statically. Apart from this being
2352 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
2353 this also allows the implementations to compile without using the
2354 internal engine_int.h header.
2357 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
2358 'const' value. Any code that should be able to modify a RAND_METHOD
2359 should already have non-const pointers to it (ie. they should only
2360 modify their own ones).
2363 *) Made a variety of little tweaks to the ENGINE code.
2364 - "atalla" and "ubsec" string definitions were moved from header files
2365 to C code. "nuron" string definitions were placed in variables
2366 rather than hard-coded - allowing parameterisation of these values
2367 later on via ctrl() commands.
2368 - Removed unused "#if 0"'d code.
2369 - Fixed engine list iteration code so it uses ENGINE_free() to release
2370 structural references.
2371 - Constified the RAND_METHOD element of ENGINE structures.
2372 - Constified various get/set functions as appropriate and added
2373 missing functions (including a catch-all ENGINE_cpy that duplicates
2374 all ENGINE values onto a new ENGINE except reference counts/state).
2375 - Removed NULL parameter checks in get/set functions. Setting a method
2376 or function to NULL is a way of cancelling out a previously set
2377 value. Passing a NULL ENGINE parameter is just plain stupid anyway
2378 and doesn't justify the extra error symbols and code.
2379 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
2380 flags from engine_int.h to engine.h.
2381 - Changed prototypes for ENGINE handler functions (init(), finish(),
2382 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
2385 *) Implement binary inversion algorithm for BN_mod_inverse in addition
2386 to the algorithm using long division. The binary algorithm can be
2387 used only if the modulus is odd. On 32-bit systems, it is faster
2388 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
2389 roughly 5-15% for 256-bit moduli), so we use it only for moduli
2390 up to 450 bits. In 64-bit environments, the binary algorithm
2391 appears to be advantageous for much longer moduli; here we use it
2392 for moduli up to 2048 bits.
2395 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
2396 could not support the combine flag in choice fields.
2399 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
2400 extensions from a certificate request to the certificate.
2403 *) Allow multiple 'certopt' and 'nameopt' options to be separated
2404 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
2405 file: this allows the display of the certificate about to be
2406 signed to be customised, to allow certain fields to be included
2407 or excluded and extension details. The old system didn't display
2408 multicharacter strings properly, omitted fields not in the policy
2409 and couldn't display additional details such as extensions.
2412 *) Function EC_POINTs_mul for multiple scalar multiplication
2413 of an arbitrary number of elliptic curve points
2414 \sum scalars[i]*points[i],
2415 optionally including the generator defined for the EC_GROUP:
2416 scalar*generator + \sum scalars[i]*points[i].
2418 EC_POINT_mul is a simple wrapper function for the typical case
2419 that the point list has just one item (besides the optional
2423 *) First EC_METHODs for curves over GF(p):
2425 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
2426 operations and provides various method functions that can also
2427 operate with faster implementations of modular arithmetic.
2429 EC_GFp_mont_method() reuses most functions that are part of
2430 EC_GFp_simple_method, but uses Montgomery arithmetic.
2432 [Bodo Moeller; point addition and point doubling
2433 implementation directly derived from source code provided by
2434 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
2436 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
2437 crypto/ec/ec_lib.c):
2439 Curves are EC_GROUP objects (with an optional group generator)
2440 based on EC_METHODs that are built into the library.
2442 Points are EC_POINT objects based on EC_GROUP objects.
2444 Most of the framework would be able to handle curves over arbitrary
2445 finite fields, but as there are no obvious types for fields other
2446 than GF(p), some functions are limited to that for now.
2449 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
2450 that the file contains a complete HTTP response.
2453 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
2454 change the def and num file printf format specifier from "%-40sXXX"
2455 to "%-39s XXX". The latter will always guarantee a space after the
2456 field while the former will cause them to run together if the field
2457 is 40 of more characters long.
2460 *) Constify the cipher and digest 'method' functions and structures
2461 and modify related functions to take constant EVP_MD and EVP_CIPHER
2465 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
2466 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
2469 *) Modify EVP_Digest*() routines so they now return values. Although the
2470 internal software routines can never fail additional hardware versions
2474 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
2476 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
2477 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
2480 ERR_R_NESTED_ASN1_ERROR
2482 ERR_R_MISSING_ASN1_EOS
2483 were 4 .. 9, conflicting with
2484 ERR_LIB_RSA (= ERR_R_RSA_LIB)
2486 ERR_LIB_PEM (= ERR_R_PEM_LIB).
2487 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
2489 Add new error code 'ERR_R_INTERNAL_ERROR'.
2492 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
2496 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
2497 sets the subject name for a new request or supersedes the
2498 subject name in a given request. Formats that can be parsed are
2499 'CN=Some Name, OU=myOU, C=IT'
2501 'CN=Some Name/OU=myOU/C=IT'.
2503 Add options '-batch' and '-verbose' to 'openssl req'.
2504 [Massimiliano Pala <madwolf@hackmasters.net>]
2506 *) Introduce the possibility to access global variables through
2507 functions on platform were that's the best way to handle exporting
2508 global variables in shared libraries. To enable this functionality,
2509 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
2510 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
2511 is normally done by Configure or something similar).
2513 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
2514 in the source file (foo.c) like this:
2516 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
2517 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
2519 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
2520 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
2522 OPENSSL_DECLARE_GLOBAL(int,foo);
2523 #define foo OPENSSL_GLOBAL_REF(foo)
2524 OPENSSL_DECLARE_GLOBAL(double,bar);
2525 #define bar OPENSSL_GLOBAL_REF(bar)
2527 The #defines are very important, and therefore so is including the
2528 header file everywhere where the defined globals are used.
2530 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
2531 of ASN.1 items, but that structure is a bit different.
2533 The largest change is in util/mkdef.pl which has been enhanced with
2534 better and easier to understand logic to choose which symbols should
2535 go into the Windows .def files as well as a number of fixes and code
2536 cleanup (among others, algorithm keywords are now sorted
2537 lexicographically to avoid constant rewrites).
2540 *) In BN_div() keep a copy of the sign of 'num' before writing the
2541 result to 'rm' because if rm==num the value will be overwritten
2542 and produce the wrong result if 'num' is negative: this caused
2543 problems with BN_mod() and BN_nnmod().
2546 *) Function OCSP_request_verify(). This checks the signature on an
2547 OCSP request and verifies the signer certificate. The signer
2548 certificate is just checked for a generic purpose and OCSP request
2552 *) Add OCSP_check_validity() function to check the validity of OCSP
2553 responses. OCSP responses are prepared in real time and may only
2554 be a few seconds old. Simply checking that the current time lies
2555 between thisUpdate and nextUpdate max reject otherwise valid responses
2556 caused by either OCSP responder or client clock inaccuracy. Instead
2557 we allow thisUpdate and nextUpdate to fall within a certain period of
2558 the current time. The age of the response can also optionally be
2559 checked. Two new options -validity_period and -status_age added to
2563 *) If signature or public key algorithm is unrecognized print out its
2564 OID rather that just UNKNOWN.
2567 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
2568 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
2569 ID to be generated from the issuer certificate alone which can then be
2570 passed to OCSP_id_issuer_cmp().
2573 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
2574 ASN1 modules to export functions returning ASN1_ITEM pointers
2575 instead of the ASN1_ITEM structures themselves. This adds several
2576 new macros which allow the underlying ASN1 function/structure to
2577 be accessed transparently. As a result code should not use ASN1_ITEM
2578 references directly (such as &X509_it) but instead use the relevant
2579 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
2580 use of the new ASN1 code on platforms where exporting structures
2581 is problematical (for example in shared libraries) but exporting
2582 functions returning pointers to structures is not.
2585 *) Add support for overriding the generation of SSL/TLS session IDs.
2586 These callbacks can be registered either in an SSL_CTX or per SSL.
2587 The purpose of this is to allow applications to control, if they wish,
2588 the arbitrary values chosen for use as session IDs, particularly as it
2589 can be useful for session caching in multiple-server environments. A
2590 command-line switch for testing this (and any client code that wishes
2591 to use such a feature) has been added to "s_server".
2592 [Geoff Thorpe, Lutz Jaenicke]
2594 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
2595 of the form '#if defined(...) || defined(...) || ...' and
2596 '#if !defined(...) && !defined(...) && ...'. This also avoids
2597 the growing number of special cases it was previously handling.
2600 *) Make all configuration macros available for application by making
2601 sure they are available in opensslconf.h, by giving them names starting
2602 with "OPENSSL_" to avoid conflicts with other packages and by making
2603 sure e_os2.h will cover all platform-specific cases together with
2605 Additionally, it is now possible to define configuration/platform-
2606 specific names (called "system identities"). In the C code, these
2607 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
2608 macro with the name beginning with "OPENSSL_SYS_", which is determined
2609 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
2613 *) New option -set_serial to 'req' and 'x509' this allows the serial
2614 number to use to be specified on the command line. Previously self
2615 signed certificates were hard coded with serial number 0 and the
2616 CA options of 'x509' had to use a serial number in a file which was
2620 *) New options to 'ca' utility to support V2 CRL entry extensions.
2621 Currently CRL reason, invalidity date and hold instruction are
2622 supported. Add new CRL extensions to V3 code and some new objects.
2625 *) New function EVP_CIPHER_CTX_set_padding() this is used to
2626 disable standard block padding (aka PKCS#5 padding) in the EVP
2627 API, which was previously mandatory. This means that the data is
2628 not padded in any way and so the total length much be a multiple
2629 of the block size, otherwise an error occurs.
2632 *) Initial (incomplete) OCSP SSL support.
2635 *) New function OCSP_parse_url(). This splits up a URL into its host,
2636 port and path components: primarily to parse OCSP URLs. New -url
2637 option to ocsp utility.
2640 *) New nonce behavior. The return value of OCSP_check_nonce() now
2641 reflects the various checks performed. Applications can decide
2642 whether to tolerate certain situations such as an absent nonce
2643 in a response when one was present in a request: the ocsp application
2644 just prints out a warning. New function OCSP_add1_basic_nonce()
2645 this is to allow responders to include a nonce in a response even if
2646 the request is nonce-less.
2649 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
2650 skipped when using openssl x509 multiple times on a single input file,
2651 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
2654 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
2655 set string type: to handle setting ASN1_TIME structures. Fix ca
2656 utility to correctly initialize revocation date of CRLs.
2659 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
2660 the clients preferred ciphersuites and rather use its own preferences.
2661 Should help to work around M$ SGC (Server Gated Cryptography) bug in
2662 Internet Explorer by ensuring unchanged hash method during stepup.
2663 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
2666 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
2667 to aes and add a new 'exist' option to print out symbols that don't
2671 *) Additional options to ocsp utility to allow flags to be set and
2672 additional certificates supplied.
2675 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
2676 OCSP client a number of certificate to only verify the response
2680 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
2681 handle the new API. Currently only ECB, CBC modes supported. Add new
2684 Add TLS AES ciphersuites as described in RFC3268, "Advanced
2685 Encryption Standard (AES) Ciphersuites for Transport Layer
2686 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
2687 not enabled by default and were not part of the "ALL" ciphersuite
2688 alias because they were not yet official; they could be
2689 explicitly requested by specifying the "AESdraft" ciphersuite
2690 group alias. In the final release of OpenSSL 0.9.7, the group
2691 alias is called "AES" and is part of "ALL".)
2692 [Ben Laurie, Steve Henson, Bodo Moeller]
2694 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
2695 request to response.
2698 *) Functions for OCSP responders. OCSP_request_onereq_count(),
2699 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
2700 extract information from a certificate request. OCSP_response_create()
2701 creates a response and optionally adds a basic response structure.
2702 OCSP_basic_add1_status() adds a complete single response to a basic
2703 response and returns the OCSP_SINGLERESP structure just added (to allow
2704 extensions to be included for example). OCSP_basic_add1_cert() adds a
2705 certificate to a basic response and OCSP_basic_sign() signs a basic
2706 response with various flags. New helper functions ASN1_TIME_check()
2707 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
2708 (converts ASN1_TIME to GeneralizedTime).
2711 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
2712 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
2713 structure from a certificate. X509_pubkey_digest() digests the public_key
2714 contents: this is used in various key identifiers.
2717 *) Make sk_sort() tolerate a NULL argument.
2718 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
2720 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
2721 passed by the function are trusted implicitly. If any of them signed the
2722 response then it is assumed to be valid and is not verified.
2725 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
2726 to data. This was previously part of the PKCS7 ASN1 code. This
2727 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
2728 [Steve Henson, reported by Kenneth R. Robinette
2729 <support@securenetterm.com>]
2731 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
2732 routines: without these tracing memory leaks is very painful.
2733 Fix leaks in PKCS12 and PKCS7 routines.
2736 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
2737 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
2738 effectively meant GeneralizedTime would never be used. Now it
2739 is initialised to -1 but X509_time_adj() now has to check the value
2740 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
2741 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
2742 [Steve Henson, reported by Kenneth R. Robinette
2743 <support@securenetterm.com>]
2745 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
2746 result in a zero length in the ASN1_INTEGER structure which was
2747 not consistent with the structure when d2i_ASN1_INTEGER() was used
2748 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
2749 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
2750 where it did not print out a minus for negative ASN1_INTEGER.
2753 *) Add summary printout to ocsp utility. The various functions which
2754 convert status values to strings have been renamed to:
2755 OCSP_response_status_str(), OCSP_cert_status_str() and
2756 OCSP_crl_reason_str() and are no longer static. New options
2757 to verify nonce values and to disable verification. OCSP response
2758 printout format cleaned up.
2761 *) Add additional OCSP certificate checks. These are those specified
2762 in RFC2560. This consists of two separate checks: the CA of the
2763 certificate being checked must either be the OCSP signer certificate
2764 or the issuer of the OCSP signer certificate. In the latter case the
2765 OCSP signer certificate must contain the OCSP signing extended key
2766 usage. This check is performed by attempting to match the OCSP
2767 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
2768 in the OCSP_CERTID structures of the response.
2771 *) Initial OCSP certificate verification added to OCSP_basic_verify()
2772 and related routines. This uses the standard OpenSSL certificate
2773 verify routines to perform initial checks (just CA validity) and
2774 to obtain the certificate chain. Then additional checks will be
2775 performed on the chain. Currently the root CA is checked to see
2776 if it is explicitly trusted for OCSP signing. This is used to set
2777 a root CA as a global signing root: that is any certificate that
2778 chains to that CA is an acceptable OCSP signing certificate.
2781 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
2782 extensions from a separate configuration file.
2783 As when reading extensions from the main configuration file,
2784 the '-extensions ...' option may be used for specifying the
2786 [Massimiliano Pala <madwolf@comune.modena.it>]
2788 *) New OCSP utility. Allows OCSP requests to be generated or
2789 read. The request can be sent to a responder and the output
2790 parsed, outputed or printed in text form. Not complete yet:
2791 still needs to check the OCSP response validity.
2794 *) New subcommands for 'openssl ca':
2795 'openssl ca -status <serial>' prints the status of the cert with
2796 the given serial number (according to the index file).
2797 'openssl ca -updatedb' updates the expiry status of certificates
2799 [Massimiliano Pala <madwolf@comune.modena.it>]
2801 *) New '-newreq-nodes' command option to CA.pl. This is like
2802 '-newreq', but calls 'openssl req' with the '-nodes' option
2803 so that the resulting key is not encrypted.
2804 [Damien Miller <djm@mindrot.org>]
2806 *) New configuration for the GNU Hurd.
2807 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
2809 *) Initial code to implement OCSP basic response verify. This
2810 is currently incomplete. Currently just finds the signer's
2811 certificate and verifies the signature on the response.
2814 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
2815 value of OPENSSLDIR. This is available via the new '-d' option
2816 to 'openssl version', and is also included in 'openssl version -a'.
2819 *) Allowing defining memory allocation callbacks that will be given
2820 file name and line number information in additional arguments
2821 (a const char* and an int). The basic functionality remains, as
2822 well as the original possibility to just replace malloc(),
2823 realloc() and free() by functions that do not know about these
2824 additional arguments. To register and find out the current
2825 settings for extended allocation functions, the following
2826 functions are provided:
2828 CRYPTO_set_mem_ex_functions
2829 CRYPTO_set_locked_mem_ex_functions
2830 CRYPTO_get_mem_ex_functions
2831 CRYPTO_get_locked_mem_ex_functions
2833 These work the same way as CRYPTO_set_mem_functions and friends.
2834 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
2835 extended allocation function is enabled.
2836 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
2837 a conventional allocation function is enabled.
2838 [Richard Levitte, Bodo Moeller]
2840 *) Finish off removing the remaining LHASH function pointer casts.
2841 There should no longer be any prototype-casting required when using
2842 the LHASH abstraction, and any casts that remain are "bugs". See
2843 the callback types and macros at the head of lhash.h for details
2844 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
2847 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
2848 If /dev/[u]random devices are not available or do not return enough
2849 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
2851 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
2852 /etc/entropy will be queried once each in this sequence, quering stops
2853 when enough entropy was collected without querying more sockets.
2856 *) Change the Unix RAND_poll() variant to be able to poll several
2857 random devices, as specified by DEVRANDOM, until a sufficient amount
2858 of data has been collected. We spend at most 10 ms on each file
2859 (select timeout) and read in non-blocking mode. DEVRANDOM now
2860 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
2861 (previously it was just the string "/dev/urandom"), so on typical
2862 platforms the 10 ms delay will never occur.
2863 Also separate out the Unix variant to its own file, rand_unix.c.
2864 For VMS, there's a currently-empty rand_vms.c.
2867 *) Move OCSP client related routines to ocsp_cl.c. These
2868 provide utility functions which an application needing
2869 to issue a request to an OCSP responder and analyse the
2870 response will typically need: as opposed to those which an
2871 OCSP responder itself would need which will be added later.
2873 OCSP_request_sign() signs an OCSP request with an API similar
2874 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
2875 response. OCSP_response_get1_basic() extracts basic response
2876 from response. OCSP_resp_find_status(): finds and extracts status
2877 information from an OCSP_CERTID structure (which will be created
2878 when the request structure is built). These are built from lower
2879 level functions which work on OCSP_SINGLERESP structures but
2880 wont normally be used unless the application wishes to examine
2881 extensions in the OCSP response for example.
2883 Replace nonce routines with a pair of functions.
2884 OCSP_request_add1_nonce() adds a nonce value and optionally
2885 generates a random value. OCSP_check_nonce() checks the
2886 validity of the nonce in an OCSP response.
2889 *) Change function OCSP_request_add() to OCSP_request_add0_id().
2890 This doesn't copy the supplied OCSP_CERTID and avoids the
2891 need to free up the newly created id. Change return type
2892 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
2893 This can then be used to add extensions to the request.
2894 Deleted OCSP_request_new(), since most of its functionality
2895 is now in OCSP_REQUEST_new() (and the case insensitive name
2896 clash) apart from the ability to set the request name which
2897 will be added elsewhere.
2900 *) Update OCSP API. Remove obsolete extensions argument from
2901 various functions. Extensions are now handled using the new
2902 OCSP extension code. New simple OCSP HTTP function which
2903 can be used to send requests and parse the response.
2906 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
2907 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
2908 uses the special reorder version of SET OF to sort the attributes
2909 and reorder them to match the encoded order. This resolves a long
2910 standing problem: a verify on a PKCS7 structure just after signing
2911 it used to fail because the attribute order did not match the
2912 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
2913 it uses the received order. This is necessary to tolerate some broken
2914 software that does not order SET OF. This is handled by encoding
2915 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
2916 to produce the required SET OF.
2919 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
2920 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
2921 files to get correct declarations of the ASN.1 item variables.
2924 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
2925 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
2926 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
2927 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
2928 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
2929 ASN1_ITEM and no wrapper functions.
2932 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
2933 replace the old function pointer based I/O routines. Change most of
2934 the *_d2i_bio() and *_d2i_fp() functions to use these.
2937 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
2938 lines, recognice more "algorithms" that can be deselected, and make
2939 it complain about algorithm deselection that isn't recognised.
2942 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
2943 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
2944 to use new functions. Add NO_ASN1_OLD which can be set to remove
2945 some old style ASN1 functions: this can be used to determine if old
2946 code will still work when these eventually go away.
2949 *) New extension functions for OCSP structures, these follow the
2950 same conventions as certificates and CRLs.
2953 *) New function X509V3_add1_i2d(). This automatically encodes and
2954 adds an extension. Its behaviour can be customised with various
2955 flags to append, replace or delete. Various wrappers added for
2956 certifcates and CRLs.
2959 *) Fix to avoid calling the underlying ASN1 print routine when
2960 an extension cannot be parsed. Correct a typo in the
2961 OCSP_SERVICELOC extension. Tidy up print OCSP format.
2964 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
2965 entries for variables.
2968 *) Add functionality to apps/openssl.c for detecting locking
2969 problems: As the program is single-threaded, all we have
2970 to do is register a locking callback using an array for
2971 storing which locks are currently held by the program.
2974 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
2975 SSL_get_ex_data_X509_STORE_idx(), which is used in
2976 ssl_verify_cert_chain() and thus can be called at any time
2977 during TLS/SSL handshakes so that thread-safety is essential.
2978 Unfortunately, the ex_data design is not at all suited
2979 for multi-threaded use, so it probably should be abolished.
2982 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
2983 [Broadcom, tweaked and integrated by Geoff Thorpe]
2985 *) Move common extension printing code to new function
2986 X509V3_print_extensions(). Reorganise OCSP print routines and
2987 implement some needed OCSP ASN1 functions. Add OCSP extensions.
2990 *) New function X509_signature_print() to remove duplication in some
2994 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
2995 set (this was treated exactly the same as SET OF previously). This
2996 is used to reorder the STACK representing the structure to match the
2997 encoding. This will be used to get round a problem where a PKCS7
2998 structure which was signed could not be verified because the STACK
2999 order did not reflect the encoded order.
3002 *) Reimplement the OCSP ASN1 module using the new code.
3005 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
3006 for its ASN1 operations. The old style function pointers still exist
3007 for now but they will eventually go away.
3010 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
3011 completely replaces the old ASN1 functionality with a table driven
3012 encoder and decoder which interprets an ASN1_ITEM structure describing
3013 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
3014 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
3015 has also been converted to the new form.
3018 *) Change BN_mod_exp_recp so that negative moduli are tolerated
3019 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
3020 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
3021 for negative moduli.
3024 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
3025 of not touching the result's sign bit.
3028 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
3032 *) Changed the LHASH code to use prototypes for callbacks, and created
3033 macros to declare and implement thin (optionally static) functions
3034 that provide type-safety and avoid function pointer casting for the
3035 type-specific callbacks.
3038 *) Added Kerberos Cipher Suites to be used with TLS, as written in
3040 [Veers Staats <staatsvr@asc.hpc.mil>,
3041 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
3043 *) Reformat the FAQ so the different questions and answers can be divided
3044 in sections depending on the subject.
3047 *) Have the zlib compression code load ZLIB.DLL dynamically under
3051 *) New function BN_mod_sqrt for computing square roots modulo a prime
3052 (using the probabilistic Tonelli-Shanks algorithm unless
3053 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
3054 be handled deterministically).
3055 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3057 *) Make BN_mod_inverse faster by explicitly handling small quotients
3058 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
3059 512 bits], about 30% for larger ones [1024 or 2048 bits].)
3062 *) New function BN_kronecker.
3065 *) Fix BN_gcd so that it works on negative inputs; the result is
3066 positive unless both parameters are zero.
3067 Previously something reasonably close to an infinite loop was
3068 possible because numbers could be growing instead of shrinking
3069 in the implementation of Euclid's algorithm.
3072 *) Fix BN_is_word() and BN_is_one() macros to take into account the
3073 sign of the number in question.
3075 Fix BN_is_word(a,w) to work correctly for w == 0.
3077 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
3078 because its test if the absolute value of 'a' equals 'w'.
3079 Note that BN_abs_is_word does *not* handle w == 0 reliably;
3080 it exists mostly for use in the implementations of BN_is_zero(),
3081 BN_is_one(), and BN_is_word().
3084 *) New function BN_swap.
3087 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
3088 the exponentiation functions are more likely to produce reasonable
3089 results on negative inputs.
3092 *) Change BN_mod_mul so that the result is always non-negative.
3093 Previously, it could be negative if one of the factors was negative;
3094 I don't think anyone really wanted that behaviour.
3097 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
3098 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
3099 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
3100 and add new functions:
3109 BN_mod_lshift1_quick
3113 These functions always generate non-negative results.
3115 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
3116 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
3118 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
3119 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
3120 be reduced modulo m.
3121 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3124 The following entry accidentily appeared in the CHANGES file
3125 distributed with OpenSSL 0.9.7. The modifications described in
3126 it do *not* apply to OpenSSL 0.9.7.
3128 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
3129 was actually never needed) and in BN_mul(). The removal in BN_mul()
3130 required a small change in bn_mul_part_recursive() and the addition
3131 of the functions bn_cmp_part_words(), bn_sub_part_words() and
3132 bn_add_part_words(), which do the same thing as bn_cmp_words(),
3133 bn_sub_words() and bn_add_words() except they take arrays with
3138 *) In 'openssl passwd', verify passwords read from the terminal
3139 unless the '-salt' option is used (which usually means that
3140 verification would just waste user's time since the resulting
3141 hash is going to be compared with some given password hash)
3142 or the new '-noverify' option is used.
3144 This is an incompatible change, but it does not affect
3145 non-interactive use of 'openssl passwd' (passwords on the command
3146 line, '-stdin' option, '-in ...' option) and thus should not
3150 *) Remove all references to RSAref, since there's no more need for it.
3153 *) Make DSO load along a path given through an environment variable
3154 (SHLIB_PATH) with shl_load().
3157 *) Constify the ENGINE code as a result of BIGNUM constification.
3158 Also constify the RSA code and most things related to it. In a
3159 few places, most notable in the depth of the ASN.1 code, ugly
3160 casts back to non-const were required (to be solved at a later
3164 *) Make it so the openssl application has all engines loaded by default.
3167 *) Constify the BIGNUM routines a little more.
3170 *) Add the following functions:
3172 ENGINE_load_cswift()
3174 ENGINE_load_atalla()
3176 ENGINE_load_builtin_engines()
3178 That way, an application can itself choose if external engines that
3179 are built-in in OpenSSL shall ever be used or not. The benefit is
3180 that applications won't have to be linked with libdl or other dso
3181 libraries unless it's really needed.
3183 Changed 'openssl engine' to load all engines on demand.
3184 Changed the engine header files to avoid the duplication of some
3185 declarations (they differed!).
3188 *) 'openssl engine' can now list capabilities.
3191 *) Better error reporting in 'openssl engine'.
3194 *) Never call load_dh_param(NULL) in s_server.
3197 *) Add engine application. It can currently list engines by name and
3198 identity, and test if they are actually available.
3201 *) Improve RPM specification file by forcing symbolic linking and making
3202 sure the installed documentation is also owned by root.root.
3203 [Damien Miller <djm@mindrot.org>]
3205 *) Give the OpenSSL applications more possibilities to make use of
3206 keys (public as well as private) handled by engines.
3209 *) Add OCSP code that comes from CertCo.
3212 *) Add VMS support for the Rijndael code.
3215 *) Added untested support for Nuron crypto accelerator.
3218 *) Add support for external cryptographic devices. This code was
3219 previously distributed separately as the "engine" branch.
3220 [Geoff Thorpe, Richard Levitte]
3222 *) Rework the filename-translation in the DSO code. It is now possible to
3223 have far greater control over how a "name" is turned into a filename
3224 depending on the operating environment and any oddities about the
3225 different shared library filenames on each system.
3228 *) Support threads on FreeBSD-elf in Configure.
3231 *) Fix for SHA1 assembly problem with MASM: it produces
3232 warnings about corrupt line number information when assembling
3233 with debugging information. This is caused by the overlapping
3235 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
3238 NCONF_get_number() has no error checking at all. As a replacement,
3239 NCONF_get_number_e() is defined (_e for "error checking") and is
3240 promoted strongly. The old NCONF_get_number is kept around for
3241 binary backward compatibility.
3242 Make it possible for methods to load from something other than a BIO,
3243 by providing a function pointer that is given a name instead of a BIO.
3244 For example, this could be used to load configuration data from an
3248 *) Fix for non blocking accept BIOs. Added new I/O special reason
3249 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
3250 with non blocking I/O was not possible because no retry code was
3251 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
3255 *) Added the beginnings of Rijndael support.
3258 *) Fix for bug in DirectoryString mask setting. Add support for
3259 X509_NAME_print_ex() in 'req' and X509_print_ex() function
3260 to allow certificate printing to more controllable, additional
3261 'certopt' option to 'x509' to allow new printing options to be
3265 *) Clean old EAY MD5 hack from e_os.h.
3268 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
3270 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3271 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3272 [Joe Orton, Steve Henson]
3274 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
3276 *) Fix additional bug revealed by the NISCC test suite:
3278 Stop bug triggering large recursion when presented with
3279 certain ASN.1 tags (CVE-2003-0851)
3282 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
3284 *) Fix various bugs revealed by running the NISCC test suite:
3286 Stop out of bounds reads in the ASN1 code when presented with
3287 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3289 If verify callback ignores invalid public key errors don't try to check
3290 certificate signature with the NULL public key.
3294 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3295 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3299 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3300 extra data after the compression methods not only for TLS 1.0
3301 but also for SSL 3.0 (as required by the specification).
3302 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3304 *) Change X509_certificate_type() to mark the key as exported/exportable
3305 when it's 512 *bits* long, not 512 bytes.
3308 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
3310 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3311 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3312 a protocol version number mismatch like a decryption error
3313 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3316 *) Turn on RSA blinding by default in the default implementation
3317 to avoid a timing attack. Applications that don't want it can call
3318 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3319 They would be ill-advised to do so in most cases.
3320 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3322 *) Change RSA blinding code so that it works when the PRNG is not
3323 seeded (in this case, the secret RSA exponent is abused as
3324 an unpredictable seed -- if it is not unpredictable, there
3325 is no point in blinding anyway). Make RSA blinding thread-safe
3326 by remembering the creator's thread ID in rsa->blinding and
3327 having all other threads use local one-time blinding factors
3328 (this requires more computation than sharing rsa->blinding, but
3329 avoids excessive locking; and if an RSA object is not shared
3330 between threads, blinding will still be very fast).
3333 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
3335 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3336 via timing by performing a MAC computation even if incorrrect
3337 block cipher padding has been found. This is a countermeasure
3338 against active attacks where the attacker has to distinguish
3339 between bad padding and a MAC verification error. (CVE-2003-0078)
3341 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3342 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3343 Martin Vuagnoux (EPFL, Ilion)]
3345 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
3347 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
3348 memory from it's contents. This is done with a counter that will
3349 place alternating values in each byte. This can be used to solve
3350 two issues: 1) the removal of calls to memset() by highly optimizing
3351 compilers, and 2) cleansing with other values than 0, since those can
3352 be read through on certain media, for example a swap space on disk.
3355 *) Bugfix: client side session caching did not work with external caching,
3356 because the session->cipher setting was not restored when reloading
3357 from the external cache. This problem was masked, when
3358 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
3359 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
3362 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
3363 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
3364 [Zeev Lieber <zeev-l@yahoo.com>]
3366 *) Undo an undocumented change introduced in 0.9.6e which caused
3367 repeated calls to OpenSSL_add_all_ciphers() and
3368 OpenSSL_add_all_digests() to be ignored, even after calling
3372 *) Change the default configuration reader to deal with last line not
3373 being properly terminated.
3376 *) Change X509_NAME_cmp() so it applies the special rules on handling
3377 DN values that are of type PrintableString, as well as RDNs of type
3378 emailAddress where the value has the type ia5String.
3379 [stefank@valicert.com via Richard Levitte]
3381 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
3382 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
3383 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
3384 the bitwise-OR of the two for use by the majority of applications
3385 wanting this behaviour, and update the docs. The documented
3386 behaviour and actual behaviour were inconsistent and had been
3387 changing anyway, so this is more a bug-fix than a behavioural
3389 [Geoff Thorpe, diagnosed by Nadav Har'El]
3391 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
3392 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
3395 *) Fix initialization code race conditions in
3396 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
3397 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
3398 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
3399 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
3400 ssl2_get_cipher_by_char(),
3401 ssl3_get_cipher_by_char().
3402 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
3404 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
3405 the cached sessions are flushed, as the remove_cb() might use ex_data
3406 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
3407 (see [openssl.org #212]).
3408 [Geoff Thorpe, Lutz Jaenicke]
3410 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
3411 length, instead of the encoding length to d2i_ASN1_OBJECT.
3414 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
3416 *) [In 0.9.6g-engine release:]
3417 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
3418 [Lynn Gazis <lgazis@rainbow.com>]
3420 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
3422 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
3423 and get fix the header length calculation.
3424 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
3425 Alon Kantor <alonk@checkpoint.com> (and others),
3428 *) Use proper error handling instead of 'assertions' in buffer
3429 overflow checks added in 0.9.6e. This prevents DoS (the
3430 assertions could call abort()).
3431 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
3433 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
3435 *) Add various sanity checks to asn1_get_length() to reject
3436 the ASN1 length bytes if they exceed sizeof(long), will appear
3437 negative or the content length exceeds the length of the
3439 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3441 *) Fix cipher selection routines: ciphers without encryption had no flags
3442 for the cipher strength set and where therefore not handled correctly
3443 by the selection routines (PR #130).
3446 *) Fix EVP_dsa_sha macro.
3450 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
3451 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
3452 that was added in OpenSSL 0.9.6d.
3454 As the countermeasure turned out to be incompatible with some
3455 broken SSL implementations, the new option is part of SSL_OP_ALL.
3456 SSL_OP_ALL is usually employed when compatibility with weird SSL
3457 implementations is desired (e.g. '-bugs' option to 's_client' and
3458 's_server'), so the new option is automatically set in many
3462 *) Changes in security patch:
3464 Changes marked "(CHATS)" were sponsored by the Defense Advanced
3465 Research Projects Agency (DARPA) and Air Force Research Laboratory,
3466 Air Force Materiel Command, USAF, under agreement number
3469 *) Add various sanity checks to asn1_get_length() to reject
3470 the ASN1 length bytes if they exceed sizeof(long), will appear
3471 negative or the content length exceeds the length of the
3472 supplied buffer. (CVE-2002-0659)
3473 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3475 *) Assertions for various potential buffer overflows, not known to
3477 [Ben Laurie (CHATS)]
3479 *) Various temporary buffers to hold ASCII versions of integers were
3480 too small for 64 bit platforms. (CVE-2002-0655)
3481 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
3483 *) Remote buffer overflow in SSL3 protocol - an attacker could
3484 supply an oversized session ID to a client. (CVE-2002-0656)
3485 [Ben Laurie (CHATS)]
3487 *) Remote buffer overflow in SSL2 protocol - an attacker could
3488 supply an oversized client master key. (CVE-2002-0656)
3489 [Ben Laurie (CHATS)]
3491 Changes between 0.9.6c and 0.9.6d [9 May 2002]
3493 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
3494 encoded as NULL) with id-dsa-with-sha1.
3495 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
3497 *) Check various X509_...() return values in apps/req.c.
3498 [Nils Larsch <nla@trustcenter.de>]
3500 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
3501 an end-of-file condition would erronously be flagged, when the CRLF
3502 was just at the end of a processed block. The bug was discovered when
3503 processing data through a buffering memory BIO handing the data to a
3504 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
3505 <ptsekov@syntrex.com> and Nedelcho Stanev.
3508 *) Implement a countermeasure against a vulnerability recently found
3509 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
3510 before application data chunks to avoid the use of known IVs
3511 with data potentially chosen by the attacker.
3514 *) Fix length checks in ssl3_get_client_hello().
3517 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
3518 to prevent ssl3_read_internal() from incorrectly assuming that
3519 ssl3_read_bytes() found application data while handshake
3520 processing was enabled when in fact s->s3->in_read_app_data was
3521 merely automatically cleared during the initial handshake.
3522 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
3524 *) Fix object definitions for Private and Enterprise: they were not
3525 recognized in their shortname (=lowercase) representation. Extend
3526 obj_dat.pl to issue an error when using undefined keywords instead
3527 of silently ignoring the problem (Svenning Sorensen
3528 <sss@sss.dnsalias.net>).
3531 *) Fix DH_generate_parameters() so that it works for 'non-standard'
3532 generators, i.e. generators other than 2 and 5. (Previously, the
3533 code did not properly initialise the 'add' and 'rem' values to
3534 BN_generate_prime().)
3536 In the new general case, we do not insist that 'generator' is
3537 actually a primitive root: This requirement is rather pointless;
3538 a generator of the order-q subgroup is just as good, if not
3542 *) Map new X509 verification errors to alerts. Discovered and submitted by
3543 Tom Wu <tom@arcot.com>.
3546 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
3547 returning non-zero before the data has been completely received
3548 when using non-blocking I/O.
3549 [Bodo Moeller; problem pointed out by John Hughes]
3551 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
3552 [Ben Laurie, Lutz Jaenicke]
3554 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
3555 Yoram Zahavi <YoramZ@gilian.com>).
3558 *) Add information about CygWin 1.3 and on, and preserve proper
3559 configuration for the versions before that.
3560 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3562 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
3563 check whether we deal with a copy of a session and do not delete from
3564 the cache in this case. Problem reported by "Izhar Shoshani Levi"
3565 <izhar@checkpoint.com>.
3568 *) Do not store session data into the internal session cache, if it
3569 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
3570 flag is set). Proposed by Aslam <aslam@funk.com>.
3573 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
3577 *) [In 0.9.6d-engine release:]
3578 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3579 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3581 *) Add the configuration target linux-s390x.
3582 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
3584 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
3585 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
3586 variable as an indication that a ClientHello message has been
3587 received. As the flag value will be lost between multiple
3588 invocations of ssl3_accept when using non-blocking I/O, the
3589 function may not be aware that a handshake has actually taken
3590 place, thus preventing a new session from being added to the
3593 To avoid this problem, we now set s->new_session to 2 instead of
3594 using a local variable.
3595 [Lutz Jaenicke, Bodo Moeller]
3597 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
3598 if the SSL_R_LENGTH_MISMATCH error is detected.
3599 [Geoff Thorpe, Bodo Moeller]
3601 *) New 'shared_ldflag' column in Configure platform table.
3604 *) Fix EVP_CIPHER_mode macro.
3605 ["Dan S. Camper" <dan@bti.net>]
3607 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
3608 type, we must throw them away by setting rr->length to 0.
3609 [D P Chang <dpc@qualys.com>]
3611 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
3613 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
3614 <Dominikus.Scherkl@biodata.com>. (The previous implementation
3615 worked incorrectly for those cases where range = 10..._2 and
3616 3*range is two bits longer than range.)
3619 *) Only add signing time to PKCS7 structures if it is not already
3623 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
3624 OBJ_ld_ce should be OBJ_id_ce.
3625 Also some ip-pda OIDs in crypto/objects/objects.txt were
3626 incorrect (cf. RFC 3039).
3627 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
3629 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
3630 returns early because it has nothing to do.
3631 [Andy Schneider <andy.schneider@bjss.co.uk>]
3633 *) [In 0.9.6c-engine release:]
3634 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
3635 [Andy Schneider <andy.schneider@bjss.co.uk>]
3637 *) [In 0.9.6c-engine release:]
3638 Add support for Cryptographic Appliance's keyserver technology.
3639 (Use engine 'keyclient')
3640 [Cryptographic Appliances and Geoff Thorpe]
3642 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
3643 is called via tools/c89.sh because arguments have to be
3644 rearranged (all '-L' options must appear before the first object
3646 [Richard Shapiro <rshapiro@abinitio.com>]
3648 *) [In 0.9.6c-engine release:]
3649 Add support for Broadcom crypto accelerator cards, backported
3651 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
3653 *) [In 0.9.6c-engine release:]
3654 Add support for SureWare crypto accelerator cards from
3655 Baltimore Technologies. (Use engine 'sureware')
3656 [Baltimore Technologies and Mark Cox]
3658 *) [In 0.9.6c-engine release:]
3659 Add support for crypto accelerator cards from Accelerated
3660 Encryption Processing, www.aep.ie. (Use engine 'aep')
3661 [AEP Inc. and Mark Cox]
3663 *) Add a configuration entry for gcc on UnixWare.
3664 [Gary Benson <gbenson@redhat.com>]
3666 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
3667 messages are stored in a single piece (fixed-length part and
3668 variable-length part combined) and fix various bugs found on the way.
3671 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
3672 instead. BIO_gethostbyname() does not know what timeouts are
3673 appropriate, so entries would stay in cache even when they have
3675 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
3677 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
3678 faced with a pathologically small ClientHello fragment that does
3679 not contain client_version: Instead of aborting with an error,
3680 simply choose the highest available protocol version (i.e.,
3681 TLS 1.0 unless it is disabled). In practice, ClientHello
3682 messages are never sent like this, but this change gives us
3683 strictly correct behaviour at least for TLS.
3686 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
3687 never resets s->method to s->ctx->method when called from within
3688 one of the SSL handshake functions.
3689 [Bodo Moeller; problem pointed out by Niko Baric]
3691 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
3692 (sent using the client's version number) if client_version is
3693 smaller than the protocol version in use. Also change
3694 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
3695 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
3696 the client will at least see that alert.
3699 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
3703 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
3704 client receives HelloRequest while in a handshake.
3705 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
3707 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
3708 should end in 'break', not 'goto end' which circuments various
3709 cleanups done in state SSL_ST_OK. But session related stuff
3710 must be disabled for SSL_ST_OK in the case that we just sent a
3713 Also avoid some overhead by not calling ssl_init_wbio_buffer()
3714 before just sending a HelloRequest.
3715 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
3717 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
3718 reveal whether illegal block cipher padding was found or a MAC
3719 verification error occured. (Neither SSLerr() codes nor alerts
3720 are directly visible to potential attackers, but the information
3721 may leak via logfiles.)
3723 Similar changes are not required for the SSL 2.0 implementation
3724 because the number of padding bytes is sent in clear for SSL 2.0,
3725 and the extra bytes are just ignored. However ssl/s2_pkt.c
3726 failed to verify that the purported number of padding bytes is in
3730 *) Add OpenUNIX-8 support including shared libraries
3731 (Boyd Lynn Gerber <gerberb@zenez.com>).
3734 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
3735 'wristwatch attack' using huge encoding parameters (cf.
3736 James H. Manger's CRYPTO 2001 paper). Note that the
3737 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
3738 encoding parameters and hence was not vulnerable.
3741 *) BN_sqr() bug fix.
3742 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
3744 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
3745 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
3746 followed by modular reduction.
3747 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
3749 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
3750 equivalent based on BN_pseudo_rand() instead of BN_rand().
3753 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
3754 This function was broken, as the check for a new client hello message
3755 to handle SGC did not allow these large messages.
3756 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
3759 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
3762 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
3763 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
3766 *) Rework the configuration and shared library support for Tru64 Unix.
3767 The configuration part makes use of modern compiler features and
3768 still retains old compiler behavior for those that run older versions
3769 of the OS. The shared library support part includes a variant that
3770 uses the RPATH feature, and is available through the special
3771 configuration target "alpha-cc-rpath", which will never be selected
3773 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
3775 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
3776 with the same message size as in ssl3_get_certificate_request().
3777 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
3778 messages might inadvertently be reject as too long.
3779 [Petr Lampa <lampa@fee.vutbr.cz>]
3781 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
3784 *) Modified SSL library such that the verify_callback that has been set
3785 specificly for an SSL object with SSL_set_verify() is actually being
3786 used. Before the change, a verify_callback set with this function was
3787 ignored and the verify_callback() set in the SSL_CTX at the time of
3788 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
3789 to allow the necessary settings.
3792 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
3793 explicitly to NULL, as at least on Solaris 8 this seems not always to be
3794 done automatically (in contradiction to the requirements of the C
3795 standard). This made problems when used from OpenSSH.
3798 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
3799 dh->length and always used
3801 BN_rand_range(priv_key, dh->p).
3803 BN_rand_range() is not necessary for Diffie-Hellman, and this
3804 specific range makes Diffie-Hellman unnecessarily inefficient if
3805 dh->length (recommended exponent length) is much smaller than the
3806 length of dh->p. We could use BN_rand_range() if the order of
3807 the subgroup was stored in the DH structure, but we only have
3812 BN_rand(priv_key, l, ...)
3814 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
3820 RSA_eay_public_encrypt
3821 RSA_eay_private_decrypt
3822 RSA_eay_private_encrypt (signing)
3823 RSA_eay_public_decrypt (signature verification)
3825 (default implementations for RSA_public_encrypt,
3826 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
3827 always reject numbers >= n.
3830 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
3831 to synchronize access to 'locking_thread'. This is necessary on
3832 systems where access to 'locking_thread' (an 'unsigned long'
3833 variable) is not atomic.
3836 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
3837 *before* setting the 'crypto_lock_rand' flag. The previous code had
3838 a race condition if 0 is a valid thread ID.
3839 [Travis Vitek <vitek@roguewave.com>]
3841 *) Add support for shared libraries under Irix.
3842 [Albert Chin-A-Young <china@thewrittenword.com>]
3844 *) Add configuration option to build on Linux on both big-endian and
3846 [Ralf Baechle <ralf@uni-koblenz.de>]
3848 *) Add the possibility to create shared libraries on HP-UX.
3851 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
3853 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
3854 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
3855 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
3856 PRNG state recovery was possible based on the output of
3857 one PRNG request appropriately sized to gain knowledge on
3858 'md' followed by enough consecutive 1-byte PRNG requests
3859 to traverse all of 'state'.
3861 1. When updating 'md_local' (the current thread's copy of 'md')
3862 during PRNG output generation, hash all of the previous
3863 'md_local' value, not just the half used for PRNG output.
3865 2. Make the number of bytes from 'state' included into the hash
3866 independent from the number of PRNG bytes requested.
3868 The first measure alone would be sufficient to avoid
3869 Markku-Juhani's attack. (Actually it had never occurred
3870 to me that the half of 'md_local' used for chaining was the
3871 half from which PRNG output bytes were taken -- I had always
3872 assumed that the secret half would be used.) The second
3873 measure makes sure that additional data from 'state' is never
3874 mixed into 'md_local' in small portions; this heuristically
3875 further strengthens the PRNG.
3878 *) Fix crypto/bn/asm/mips3.s.
3881 *) When only the key is given to "enc", the IV is undefined. Print out
3882 an error message in this case.
3885 *) Handle special case when X509_NAME is empty in X509 printing routines.
3888 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
3889 positive and less than q.
3892 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
3893 used: it isn't thread safe and the add_lock_callback should handle
3895 [Paul Rose <Paul.Rose@bridge.com>]
3897 *) Verify that incoming data obeys the block size in
3898 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
3902 [Ulf Möller, Bodo Möller]
3904 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
3905 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
3906 when fixing the server behaviour for backwards-compatible 'client
3907 hello' messages. (Note that the attack is impractical against
3908 SSL 3.0 and TLS 1.0 anyway because length and version checking
3909 means that the probability of guessing a valid ciphertext is
3910 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
3913 Before 0.9.5, the countermeasure (hide the error by generating a
3914 random 'decryption result') did not work properly because
3915 ERR_clear_error() was missing, meaning that SSL_get_error() would
3916 detect the supposedly ignored error.
3918 Both problems are now fixed.
3921 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
3922 (previously it was 1024).
3925 *) Fix for compatibility mode trust settings: ignore trust settings
3926 unless some valid trust or reject settings are present.
3929 *) Fix for blowfish EVP: its a variable length cipher.
3932 *) Fix various bugs related to DSA S/MIME verification. Handle missing
3933 parameters in DSA public key structures and return an error in the
3934 DSA routines if parameters are absent.
3937 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
3938 in the current directory if neither $RANDFILE nor $HOME was set.
3939 RAND_file_name() in 0.9.6a returned NULL in this case. This has
3940 caused some confusion to Windows users who haven't defined $HOME.
3941 Thus RAND_file_name() is changed again: e_os.h can define a
3942 DEFAULT_HOME, which will be used if $HOME is not set.
3943 For Windows, we use "C:"; on other platforms, we still require
3944 environment variables.
3946 *) Move 'if (!initialized) RAND_poll()' into regions protected by
3947 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
3948 having multiple threads call RAND_poll() concurrently.
3951 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
3952 combination of a flag and a thread ID variable.
3953 Otherwise while one thread is in ssleay_rand_bytes (which sets the
3954 flag), *other* threads can enter ssleay_add_bytes without obeying
3955 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
3956 that they do not hold after the first thread unsets add_do_not_lock).
3959 *) Change bctest again: '-x' expressions are not available in all
3963 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
3965 *) Fix a couple of memory leaks in PKCS7_dataDecode()
3966 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
3968 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
3969 the default extension for executables, if any. Also, make the perl
3970 scripts that use symlink() to test if it really exists and use "cp"
3971 if it doesn't. All this made OpenSSL compilable and installable in
3975 *) Fix for asn1_GetSequence() for indefinite length constructed data.
3976 If SEQUENCE is length is indefinite just set c->slen to the total
3977 amount of data available.
3978 [Steve Henson, reported by shige@FreeBSD.org]
3979 [This change does not apply to 0.9.7.]
3981 *) Change bctest to avoid here-documents inside command substitution
3982 (workaround for FreeBSD /bin/sh bug).
3983 For compatibility with Ultrix, avoid shell functions (introduced
3984 in the bctest version that searches along $PATH).
3987 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
3988 with des_encrypt() defined on some operating systems, like Solaris
3992 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
3993 On the Importance of Eliminating Errors in Cryptographic
3994 Computations, J. Cryptology 14 (2001) 2, 101-119,
3995 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
3998 *) MIPS assembler BIGNUM division bug fix.
4001 *) Disabled incorrect Alpha assembler code.
4004 *) Fix PKCS#7 decode routines so they correctly update the length
4005 after reading an EOC for the EXPLICIT tag.
4007 [This change does not apply to 0.9.7.]
4009 *) Fix bug in PKCS#12 key generation routines. This was triggered
4010 if a 3DES key was generated with a 0 initial byte. Include
4011 PKCS12_BROKEN_KEYGEN compilation option to retain the old
4012 (but broken) behaviour.
4015 *) Enhance bctest to search for a working bc along $PATH and print
4017 [Tim Rice <tim@multitalents.net> via Richard Levitte]
4019 *) Fix memory leaks in err.c: free err_data string if necessary;
4020 don't write to the wrong index in ERR_set_error_data.
4023 *) Implement ssl23_peek (analogous to ssl23_read), which previously
4027 *) Replace rdtsc with _emit statements for VC++ version 5.
4028 [Jeremy Cooper <jeremy@baymoo.org>]
4030 *) Make it possible to reuse SSLv2 sessions.
4033 *) In copy_email() check for >= 0 as a return value for
4034 X509_NAME_get_index_by_NID() since 0 is a valid index.
4035 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
4037 *) Avoid coredump with unsupported or invalid public keys by checking if
4038 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
4039 PKCS7_verify() fails with non detached data.
4042 *) Don't use getenv in library functions when run as setuid/setgid.
4043 New function OPENSSL_issetugid().
4046 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
4047 due to incorrect handling of multi-threading:
4049 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
4051 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
4053 3. Count how many times MemCheck_off() has been called so that
4054 nested use can be treated correctly. This also avoids
4055 inband-signalling in the previous code (which relied on the
4056 assumption that thread ID 0 is impossible).
4059 *) Add "-rand" option also to s_client and s_server.
4062 *) Fix CPU detection on Irix 6.x.
4063 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
4064 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4066 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
4069 [This change does not apply to 0.9.7.]
4071 *) Use the cached encoding of an X509_NAME structure rather than
4072 copying it. This is apparently the reason for the libsafe "errors"
4073 but the code is actually correct.
4076 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
4077 Bleichenbacher's DSA attack.
4078 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
4079 to be set and top=0 forces the highest bit to be set; top=-1 is new
4080 and leaves the highest bit random.
4081 [Ulf Moeller, Bodo Moeller]
4083 *) In the NCONF_...-based implementations for CONF_... queries
4084 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
4085 a temporary CONF structure with the data component set to NULL
4086 (which gives segmentation faults in lh_retrieve).
4087 Instead, use NULL for the CONF pointer in CONF_get_string and
4088 CONF_get_number (which may use environment variables) and directly
4089 return NULL from CONF_get_section.
4092 *) Fix potential buffer overrun for EBCDIC.
4095 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
4096 keyUsage if basicConstraints absent for a CA.
4099 *) Make SMIME_write_PKCS7() write mail header values with a format that
4100 is more generally accepted (no spaces before the semicolon), since
4101 some programs can't parse those values properly otherwise. Also make
4102 sure BIO's that break lines after each write do not create invalid
4106 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
4107 macros previously used would not encode an empty SEQUENCE OF
4108 and break the signature.
4110 [This change does not apply to 0.9.7.]
4112 *) Zero the premaster secret after deriving the master secret in
4116 *) Add some EVP_add_digest_alias registrations (as found in
4117 OpenSSL_add_all_digests()) to SSL_library_init()
4118 aka OpenSSL_add_ssl_algorithms(). This provides improved
4119 compatibility with peers using X.509 certificates
4120 with unconventional AlgorithmIdentifier OIDs.
4123 *) Fix for Irix with NO_ASM.
4124 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4126 *) ./config script fixes.
4127 [Ulf Moeller, Richard Levitte]
4129 *) Fix 'openssl passwd -1'.
4132 *) Change PKCS12_key_gen_asc() so it can cope with non null
4133 terminated strings whose length is passed in the passlen
4134 parameter, for example from PEM callbacks. This was done
4135 by adding an extra length parameter to asc2uni().
4136 [Steve Henson, reported by <oddissey@samsung.co.kr>]
4138 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
4139 call failed, free the DSA structure.
4142 *) Fix to uni2asc() to cope with zero length Unicode strings.
4143 These are present in some PKCS#12 files.
4146 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
4147 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
4148 when writing a 32767 byte record.
4149 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
4151 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
4152 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
4154 (RSA objects have a reference count access to which is protected
4155 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
4156 so they are meant to be shared between threads.)
4157 [Bodo Moeller, Geoff Thorpe; original patch submitted by
4158 "Reddie, Steven" <Steven.Reddie@ca.com>]
4160 *) Fix a deadlock in CRYPTO_mem_leaks().
4163 *) Use better test patterns in bntest.
4166 *) rand_win.c fix for Borland C.
4169 *) BN_rshift bugfix for n == 0.
4172 *) Add a 'bctest' script that checks for some known 'bc' bugs
4173 so that 'make test' does not abort just because 'bc' is broken.
4176 *) Store verify_result within SSL_SESSION also for client side to
4177 avoid potential security hole. (Re-used sessions on the client side
4178 always resulted in verify_result==X509_V_OK, not using the original
4179 result of the server certificate verification.)
4182 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
4183 SSL3_RT_APPLICATION_DATA, return 0.
4184 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
4188 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
4189 releases, have been re-implemented by renaming the previous
4190 implementations of ssl2_read and ssl3_read to ssl2_read_internal
4191 and ssl3_read_internal, respectively, and adding 'peek' parameters
4192 to them. The new ssl[23]_{read,peek} functions are calls to
4193 ssl[23]_read_internal with the 'peek' flag set appropriately.
4194 A 'peek' parameter has also been added to ssl3_read_bytes, which
4195 does the actual work for ssl3_read_internal.
4198 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
4199 the method-specific "init()" handler. Also clean up ex_data after
4200 calling the method-specific "finish()" handler. Previously, this was
4201 happening the other way round.
4204 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
4205 The previous value, 12, was not always sufficient for BN_mod_exp().
4208 *) Make sure that shared libraries get the internal name engine with
4209 the full version number and not just 0. This should mark the
4210 shared libraries as not backward compatible. Of course, this should
4211 be changed again when we can guarantee backward binary compatibility.
4214 *) Fix typo in get_cert_by_subject() in by_dir.c
4215 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
4217 *) Rework the system to generate shared libraries:
4219 - Make note of the expected extension for the shared libraries and
4220 if there is a need for symbolic links from for example libcrypto.so.0
4221 to libcrypto.so.0.9.7. There is extended info in Configure for
4224 - Make as few rebuilds of the shared libraries as possible.
4226 - Still avoid linking the OpenSSL programs with the shared libraries.
4228 - When installing, install the shared libraries separately from the
4232 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
4234 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
4235 and not in SSL_clear because the latter is also used by the
4236 accept/connect functions; previously, the settings made by
4237 SSL_set_read_ahead would be lost during the handshake.
4238 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
4240 *) Correct util/mkdef.pl to be selective about disabled algorithms.
4241 Previously, it would create entries for disableed algorithms no
4245 *) Added several new manual pages for SSL_* function.
4248 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
4250 *) In ssl23_get_client_hello, generate an error message when faced
4251 with an initial SSL 3.0/TLS record that is too small to contain the
4252 first two bytes of the ClientHello message, i.e. client_version.
4253 (Note that this is a pathologic case that probably has never happened
4254 in real life.) The previous approach was to use the version number
4255 from the record header as a substitute; but our protocol choice
4256 should not depend on that one because it is not authenticated
4257 by the Finished messages.
4260 *) More robust randomness gathering functions for Windows.
4261 [Jeffrey Altman <jaltman@columbia.edu>]
4263 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
4264 not set then we don't setup the error code for issuer check errors
4265 to avoid possibly overwriting other errors which the callback does
4266 handle. If an application does set the flag then we assume it knows
4267 what it is doing and can handle the new informational codes
4271 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
4272 a general "ANY" type, as such it should be able to decode anything
4273 including tagged types. However it didn't check the class so it would
4274 wrongly interpret tagged types in the same way as their universal
4275 counterpart and unknown types were just rejected. Changed so that the
4276 tagged and unknown types are handled in the same way as a SEQUENCE:
4277 that is the encoding is stored intact. There is also a new type
4278 "V_ASN1_OTHER" which is used when the class is not universal, in this
4279 case we have no idea what the actual type is so we just lump them all
4283 *) On VMS, stdout may very well lead to a file that is written to
4284 in a record-oriented fashion. That means that every write() will
4285 write a separate record, which will be read separately by the
4286 programs trying to read from it. This can be very confusing.
4288 The solution is to put a BIO filter in the way that will buffer
4289 text until a linefeed is reached, and then write everything a
4290 line at a time, so every record written will be an actual line,
4291 not chunks of lines and not (usually doesn't happen, but I've
4292 seen it once) several lines in one record. BIO_f_linebuffer() is
4295 Currently, it's a VMS-only method, because that's where it has
4296 been tested well enough.
4299 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
4300 it can return incorrect results.
4301 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
4302 but it was in 0.9.6-beta[12].)
4305 *) Disable the check for content being present when verifying detached
4306 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
4307 include zero length content when signing messages.
4310 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
4311 BIO_ctrl (for BIO pairs).
4314 *) Add DSO method for VMS.
4317 *) Bug fix: Montgomery multiplication could produce results with the
4321 *) Add RPM specification openssl.spec and modify it to build three
4322 packages. The default package contains applications, application
4323 documentation and run-time libraries. The devel package contains
4324 include files, static libraries and function documentation. The
4325 doc package contains the contents of the doc directory. The original
4326 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
4329 *) Add a large number of documentation files for many SSL routines.
4330 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
4332 *) Add a configuration entry for Sony News 4.
4333 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
4335 *) Don't set the two most significant bits to one when generating a
4336 random number < q in the DSA library.
4339 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
4340 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
4341 the underlying transport is blocking) if a handshake took place.
4342 (The default behaviour is needed by applications such as s_client
4343 and s_server that use select() to determine when to use SSL_read;
4344 but for applications that know in advance when to expect data, it
4345 just makes things more complicated.)
4348 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
4352 *) Add a few more EBCDIC conditionals that make `req' and `x509'
4353 work better on such systems.
4354 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
4356 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
4357 Update PKCS12_parse() so it copies the friendlyName and the
4358 keyid to the certificates aux info.
4361 *) Fix bug in PKCS7_verify() which caused an infinite loop
4362 if there was more than one signature.
4363 [Sven Uszpelkat <su@celocom.de>]
4365 *) Major change in util/mkdef.pl to include extra information
4366 about each symbol, as well as presentig variables as well
4367 as functions. This change means that there's n more need
4368 to rebuild the .num files when some algorithms are excluded.
4371 *) Allow the verify time to be set by an application,
4372 rather than always using the current time.
4375 *) Phase 2 verify code reorganisation. The certificate
4376 verify code now looks up an issuer certificate by a
4377 number of criteria: subject name, authority key id
4378 and key usage. It also verifies self signed certificates
4379 by the same criteria. The main comparison function is
4380 X509_check_issued() which performs these checks.
4382 Lot of changes were necessary in order to support this
4383 without completely rewriting the lookup code.
4385 Authority and subject key identifier are now cached.
4387 The LHASH 'certs' is X509_STORE has now been replaced
4388 by a STACK_OF(X509_OBJECT). This is mainly because an
4389 LHASH can't store or retrieve multiple objects with
4390 the same hash value.
4392 As a result various functions (which were all internal
4393 use only) have changed to handle the new X509_STORE
4394 structure. This will break anything that messed round
4395 with X509_STORE internally.
4397 The functions X509_STORE_add_cert() now checks for an
4398 exact match, rather than just subject name.
4400 The X509_STORE API doesn't directly support the retrieval
4401 of multiple certificates matching a given criteria, however
4402 this can be worked round by performing a lookup first
4403 (which will fill the cache with candidate certificates)
4404 and then examining the cache for matches. This is probably
4405 the best we can do without throwing out X509_LOOKUP
4406 entirely (maybe later...).
4408 The X509_VERIFY_CTX structure has been enhanced considerably.
4410 All certificate lookup operations now go via a get_issuer()
4411 callback. Although this currently uses an X509_STORE it
4412 can be replaced by custom lookups. This is a simple way
4413 to bypass the X509_STORE hackery necessary to make this
4414 work and makes it possible to use more efficient techniques
4415 in future. A very simple version which uses a simple
4416 STACK for its trusted certificate store is also provided
4417 using X509_STORE_CTX_trusted_stack().
4419 The verify_cb() and verify() callbacks now have equivalents
4420 in the X509_STORE_CTX structure.
4422 X509_STORE_CTX also has a 'flags' field which can be used
4423 to customise the verify behaviour.
4426 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
4427 excludes S/MIME capabilities.
4430 *) When a certificate request is read in keep a copy of the
4431 original encoding of the signed data and use it when outputing
4432 again. Signatures then use the original encoding rather than
4433 a decoded, encoded version which may cause problems if the
4434 request is improperly encoded.
4437 *) For consistency with other BIO_puts implementations, call
4438 buffer_write(b, ...) directly in buffer_puts instead of calling
4441 In BIO_puts, increment b->num_write as in BIO_write.
4442 [Peter.Sylvester@EdelWeb.fr]
4444 *) Fix BN_mul_word for the case where the word is 0. (We have to use
4445 BN_zero, we may not return a BIGNUM with an array consisting of
4449 *) Avoid calling abort() from within the library when problems are
4450 detected, except if preprocessor symbols have been defined
4451 (such as REF_CHECK, BN_DEBUG etc.).
4454 *) New openssl application 'rsautl'. This utility can be
4455 used for low level RSA operations. DER public key
4456 BIO/fp routines also added.
4459 *) New Configure entry and patches for compiling on QNX 4.
4460 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
4462 *) A demo state-machine implementation was sponsored by
4463 Nuron (http://www.nuron.com/) and is now available in
4464 demos/state_machine.
4467 *) New options added to the 'dgst' utility for signature
4468 generation and verification.
4471 *) Unrecognized PKCS#7 content types are now handled via a
4472 catch all ASN1_TYPE structure. This allows unsupported
4473 types to be stored as a "blob" and an application can
4474 encode and decode it manually.
4477 *) Fix various signed/unsigned issues to make a_strex.c
4479 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
4481 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
4482 length if passed a buffer. ASN1_INTEGER_to_BN failed
4483 if passed a NULL BN and its argument was negative.
4484 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
4486 *) Modification to PKCS#7 encoding routines to output definite
4487 length encoding. Since currently the whole structures are in
4488 memory there's not real point in using indefinite length
4489 constructed encoding. However if OpenSSL is compiled with
4490 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
4493 *) Added BIO_vprintf() and BIO_vsnprintf().
4496 *) Added more prefixes to parse for in the the strings written
4497 through a logging bio, to cover all the levels that are available
4498 through syslog. The prefixes are now:
4500 PANIC, EMERG, EMR => LOG_EMERG
4501 ALERT, ALR => LOG_ALERT
4502 CRIT, CRI => LOG_CRIT
4503 ERROR, ERR => LOG_ERR
4504 WARNING, WARN, WAR => LOG_WARNING
4505 NOTICE, NOTE, NOT => LOG_NOTICE
4506 INFO, INF => LOG_INFO
4507 DEBUG, DBG => LOG_DEBUG
4509 and as before, if none of those prefixes are present at the
4510 beginning of the string, LOG_ERR is chosen.
4512 On Win32, the LOG_* levels are mapped according to this:
4514 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
4515 LOG_WARNING => EVENTLOG_WARNING_TYPE
4516 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
4520 *) Made it possible to reconfigure with just the configuration
4521 argument "reconf" or "reconfigure". The command line arguments
4522 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
4523 and are retrieved from there when reconfiguring.
4527 [Assar Westerlund <assar@sics.se>, Richard Levitte]
4529 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
4532 *) The obj_dat.pl script was messing up the sorting of object
4533 names. The reason was that it compared the quoted version
4534 of strings as a result "OCSP" > "OCSP Signing" because
4535 " > SPACE. Changed script to store unquoted versions of
4536 names and add quotes on output. It was also omitting some
4537 names from the lookup table if they were given a default
4538 value (that is if SN is missing it is given the same
4539 value as LN and vice versa), these are now added on the
4540 grounds that if an object has a name we should be able to
4541 look it up. Finally added warning output when duplicate
4542 short or long names are found.
4545 *) Changes needed for Tandem NSK.
4546 [Scott Uroff <scott@xypro.com>]
4548 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
4549 RSA_padding_check_SSLv23(), special padding was never detected
4550 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
4551 version rollback attacks was not effective.
4553 In s23_clnt.c, don't use special rollback-attack detection padding
4554 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
4555 client; similarly, in s23_srvr.c, don't do the rollback check if
4556 SSL 2.0 is the only protocol enabled in the server.
4559 *) Make it possible to get hexdumps of unprintable data with 'openssl
4560 asn1parse'. By implication, the functions ASN1_parse_dump() and
4561 BIO_dump_indent() are added.
4564 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
4565 these print out strings and name structures based on various
4566 flags including RFC2253 support and proper handling of
4567 multibyte characters. Added options to the 'x509' utility
4568 to allow the various flags to be set.
4571 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
4572 Also change the functions X509_cmp_current_time() and
4573 X509_gmtime_adj() work with an ASN1_TIME structure,
4574 this will enable certificates using GeneralizedTime in validity
4575 dates to be checked.
4578 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
4579 negative public key encodings) on by default,
4580 NO_NEG_PUBKEY_BUG can be set to disable it.
4583 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
4584 content octets. An i2c_ASN1_OBJECT is unnecessary because
4585 the encoding can be trivially obtained from the structure.
4588 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
4589 not read locks (CRYPTO_r_[un]lock).
4592 *) A first attempt at creating official support for shared
4593 libraries through configuration. I've kept it so the
4594 default is static libraries only, and the OpenSSL programs
4595 are always statically linked for now, but there are
4596 preparations for dynamic linking in place.
4597 This has been tested on Linux and Tru64.
4600 *) Randomness polling function for Win9x, as described in:
4601 Peter Gutmann, Software Generation of Practically Strong
4605 *) Fix so PRNG is seeded in req if using an already existing
4609 *) New options to smime application. -inform and -outform
4610 allow alternative formats for the S/MIME message including
4611 PEM and DER. The -content option allows the content to be
4612 specified separately. This should allow things like Netscape
4613 form signing output easier to verify.
4616 *) Fix the ASN1 encoding of tags using the 'long form'.
4619 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
4620 STRING types. These convert content octets to and from the
4621 underlying type. The actual tag and length octets are
4622 already assumed to have been read in and checked. These
4623 are needed because all other string types have virtually
4624 identical handling apart from the tag. By having versions
4625 of the ASN1 functions that just operate on content octets
4626 IMPLICIT tagging can be handled properly. It also allows
4627 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
4628 and ASN1_INTEGER are identical apart from the tag.
4631 *) Change the handling of OID objects as follows:
4633 - New object identifiers are inserted in objects.txt, following
4634 the syntax given in objects.README.
4635 - objects.pl is used to process obj_mac.num and create a new
4637 - obj_dat.pl is used to create a new obj_dat.h, using the data in
4640 This is currently kind of a hack, and the perl code in objects.pl
4641 isn't very elegant, but it works as I intended. The simplest way
4642 to check that it worked correctly is to look in obj_dat.h and
4643 check the array nid_objs and make sure the objects haven't moved
4644 around (this is important!). Additions are OK, as well as
4645 consistent name changes.
4648 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
4651 *) Addition of the command line parameter '-rand file' to 'openssl req'.
4652 The given file adds to whatever has already been seeded into the
4653 random pool through the RANDFILE configuration file option or
4654 environment variable, or the default random state file.
4657 *) mkstack.pl now sorts each macro group into lexical order.
4658 Previously the output order depended on the order the files
4659 appeared in the directory, resulting in needless rewriting
4663 *) Patches to make OpenSSL compile under Win32 again. Mostly
4664 work arounds for the VC++ problem that it treats func() as
4665 func(void). Also stripped out the parts of mkdef.pl that
4666 added extra typesafe functions: these no longer exist.
4669 *) Reorganisation of the stack code. The macros are now all
4670 collected in safestack.h . Each macro is defined in terms of
4671 a "stack macro" of the form SKM_<name>(type, a, b). The
4672 DEBUG_SAFESTACK is now handled in terms of function casts,
4673 this has the advantage of retaining type safety without the
4674 use of additional functions. If DEBUG_SAFESTACK is not defined
4675 then the non typesafe macros are used instead. Also modified the
4676 mkstack.pl script to handle the new form. Needs testing to see
4677 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
4678 the default if no major problems. Similar behaviour for ASN1_SET_OF
4679 and PKCS12_STACK_OF.
4682 *) When some versions of IIS use the 'NET' form of private key the
4683 key derivation algorithm is different. Normally MD5(password) is
4684 used as a 128 bit RC4 key. In the modified case
4685 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
4686 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
4687 as the old Netscape_RSA functions except they have an additional
4688 'sgckey' parameter which uses the modified algorithm. Also added
4689 an -sgckey command line option to the rsa utility. Thanks to
4690 Adrian Peck <bertie@ncipher.com> for posting details of the modified
4691 algorithm to openssl-dev.
4694 *) The evp_local.h macros were using 'c.##kname' which resulted in
4695 invalid expansion on some systems (SCO 5.0.5 for example).
4696 Corrected to 'c.kname'.
4697 [Phillip Porch <root@theporch.com>]
4699 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
4700 a STACK of email addresses from a certificate or request, these look
4701 in the subject name and the subject alternative name extensions and
4702 omit any duplicate addresses.
4705 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
4706 This makes DSA verification about 2 % faster.
4709 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
4710 (meaning that now 2^5 values will be precomputed, which is only 4 KB
4711 plus overhead for 1024 bit moduli).
4712 This makes exponentiations about 0.5 % faster for 1024 bit
4713 exponents (as measured by "openssl speed rsa2048").
4716 *) Rename memory handling macros to avoid conflicts with other
4718 Malloc => OPENSSL_malloc
4719 Malloc_locked => OPENSSL_malloc_locked
4720 Realloc => OPENSSL_realloc
4721 Free => OPENSSL_free
4724 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
4725 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
4728 *) CygWin32 support.
4729 [John Jarvie <jjarvie@newsguy.com>]
4731 *) The type-safe stack code has been rejigged. It is now only compiled
4732 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
4733 by default all type-specific stack functions are "#define"d back to
4734 standard stack functions. This results in more streamlined output
4735 but retains the type-safety checking possibilities of the original
4739 *) The STACK code has been cleaned up, and certain type declarations
4740 that didn't make a lot of sense have been brought in line. This has
4741 also involved a cleanup of sorts in safestack.h to more correctly
4742 map type-safe stack functions onto their plain stack counterparts.
4743 This work has also resulted in a variety of "const"ifications of
4744 lots of the code, especially "_cmp" operations which should normally
4745 be prototyped with "const" parameters anyway.
4748 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
4749 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
4750 (The PRNG state consists of two parts, the large pool 'state' and 'md',
4751 where all of 'md' is used each time the PRNG is used, but 'state'
4752 is used only indexed by a cyclic counter. As entropy may not be
4753 well distributed from the beginning, 'md' is important as a
4754 chaining variable. However, the output function chains only half
4755 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
4756 all of 'md', and seeding with STATE_SIZE dummy bytes will result
4757 in all of 'state' being rewritten, with the new values depending
4758 on virtually all of 'md'. This overcomes the 80 bit limitation.)
4761 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
4762 the handshake is continued after ssl_verify_cert_chain();
4763 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
4764 can lead to 'unexplainable' connection aborts later.
4765 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
4767 *) Major EVP API cipher revision.
4768 Add hooks for extra EVP features. This allows various cipher
4769 parameters to be set in the EVP interface. Support added for variable
4770 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
4771 setting of RC2 and RC5 parameters.
4773 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
4776 Remove lots of duplicated code from the EVP library. For example *every*
4777 cipher init() function handles the 'iv' in the same way according to the
4778 cipher mode. They also all do nothing if the 'key' parameter is NULL and
4779 for CFB and OFB modes they zero ctx->num.
4781 New functionality allows removal of S/MIME code RC2 hack.
4783 Most of the routines have the same form and so can be declared in terms
4786 By shifting this to the top level EVP_CipherInit() it can be removed from
4787 all individual ciphers. If the cipher wants to handle IVs or keys
4788 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
4791 Change lots of functions like EVP_EncryptUpdate() to now return a
4792 value: although software versions of the algorithms cannot fail
4793 any installed hardware versions can.
4796 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
4797 this option is set, tolerate broken clients that send the negotiated
4798 protocol version number instead of the requested protocol version
4802 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
4803 i.e. non-zero for export ciphersuites, zero otherwise.
4804 Previous versions had this flag inverted, inconsistent with
4805 rsa_tmp_cb (..._TMP_RSA_CB).
4806 [Bodo Moeller; problem reported by Amit Chopra]
4808 *) Add missing DSA library text string. Work around for some IIS
4809 key files with invalid SEQUENCE encoding.
4812 *) Add a document (doc/standards.txt) that list all kinds of standards
4813 and so on that are implemented in OpenSSL.
4816 *) Enhance c_rehash script. Old version would mishandle certificates
4817 with the same subject name hash and wouldn't handle CRLs at all.
4818 Added -fingerprint option to crl utility, to support new c_rehash
4822 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
4825 *) Fix for SSL server purpose checking. Server checking was
4826 rejecting certificates which had extended key usage present
4827 but no ssl client purpose.
4828 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
4830 *) Make PKCS#12 code work with no password. The PKCS#12 spec
4831 is a little unclear about how a blank password is handled.
4832 Since the password in encoded as a BMPString with terminating
4833 double NULL a zero length password would end up as just the
4834 double NULL. However no password at all is different and is
4835 handled differently in the PKCS#12 key generation code. NS
4836 treats a blank password as zero length. MSIE treats it as no
4837 password on export: but it will try both on import. We now do
4838 the same: PKCS12_parse() tries zero length and no password if
4839 the password is set to "" or NULL (NULL is now a valid password:
4840 it wasn't before) as does the pkcs12 application.
4843 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
4844 perror when PEM_read_bio_X509_REQ fails, the error message must
4845 be obtained from the error queue.
4848 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
4849 it in ERR_remove_state if appropriate, and change ERR_get_state
4850 accordingly to avoid race conditions (this is necessary because
4851 thread_hash is no longer constant once set).
4854 *) Bugfix for linux-elf makefile.one.
4857 *) RSA_get_default_method() will now cause a default
4858 RSA_METHOD to be chosen if one doesn't exist already.
4859 Previously this was only set during a call to RSA_new()
4860 or RSA_new_method(NULL) meaning it was possible for
4861 RSA_get_default_method() to return NULL.
4864 *) Added native name translation to the existing DSO code
4865 that will convert (if the flag to do so is set) filenames
4866 that are sufficiently small and have no path information
4867 into a canonical native form. Eg. "blah" converted to
4868 "libblah.so" or "blah.dll" etc.
4871 *) New function ERR_error_string_n(e, buf, len) which is like
4872 ERR_error_string(e, buf), but writes at most 'len' bytes
4873 including the 0 terminator. For ERR_error_string_n, 'buf'
4875 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
4877 *) CONF library reworked to become more general. A new CONF
4878 configuration file reader "class" is implemented as well as a
4879 new functions (NCONF_*, for "New CONF") to handle it. The now
4880 old CONF_* functions are still there, but are reimplemented to
4881 work in terms of the new functions. Also, a set of functions
4882 to handle the internal storage of the configuration data is
4883 provided to make it easier to write new configuration file
4884 reader "classes" (I can definitely see something reading a
4885 configuration file in XML format, for example), called _CONF_*,
4886 or "the configuration storage API"...
4888 The new configuration file reading functions are:
4890 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
4891 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
4893 NCONF_default, NCONF_WIN32
4895 NCONF_dump_fp, NCONF_dump_bio
4897 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
4898 NCONF_new creates a new CONF object. This works in the same way
4899 as other interfaces in OpenSSL, like the BIO interface.
4900 NCONF_dump_* dump the internal storage of the configuration file,
4901 which is useful for debugging. All other functions take the same
4902 arguments as the old CONF_* functions wth the exception of the
4903 first that must be a `CONF *' instead of a `LHASH *'.
4905 To make it easer to use the new classes with the old CONF_* functions,
4906 the function CONF_set_default_method is provided.
4909 *) Add '-tls1' option to 'openssl ciphers', which was already
4910 mentioned in the documentation but had not been implemented.
4911 (This option is not yet really useful because even the additional
4912 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
4915 *) Initial DSO code added into libcrypto for letting OpenSSL (and
4916 OpenSSL-based applications) load shared libraries and bind to
4917 them in a portable way.
4918 [Geoff Thorpe, with contributions from Richard Levitte]
4920 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
4922 *) Make sure _lrotl and _lrotr are only used with MSVC.
4924 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
4925 (the default implementation of RAND_status).
4927 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
4928 to '-clrext' (= clear extensions), as intended and documented.
4929 [Bodo Moeller; inconsistency pointed out by Michael Attili
4932 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
4933 was larger than the MD block size.
4934 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
4936 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
4937 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
4938 using the passed key: if the passed key was a private key the result
4939 of X509_print(), for example, would be to print out all the private key
4943 *) des_quad_cksum() byte order bug fix.
4944 [Ulf Möller, using the problem description in krb4-0.9.7, where
4945 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
4947 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
4949 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
4951 *) For easily testing in shell scripts whether some command
4952 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
4953 returns with exit code 0 iff no command of the given name is available.
4954 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
4955 the output goes to stdout and nothing is printed to stderr.
4956 Additional arguments are always ignored.
4958 Since for each cipher there is a command of the same name,
4959 the 'no-cipher' compilation switches can be tested this way.
4961 ('openssl no-XXX' is not able to detect pseudo-commands such
4962 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
4965 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
4968 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
4969 is set; it will be thrown away anyway because each handshake creates
4971 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
4972 to parameters -- in previous versions (since OpenSSL 0.9.3) the
4973 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
4974 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
4977 *) New s_client option -ign_eof: EOF at stdin is ignored, and
4978 'Q' and 'R' lose their special meanings (quit/renegotiate).
4979 This is part of what -quiet does; unlike -quiet, -ign_eof
4980 does not suppress any output.
4983 *) Add compatibility options to the purpose and trust code. The
4984 purpose X509_PURPOSE_ANY is "any purpose" which automatically
4985 accepts a certificate or CA, this was the previous behaviour,
4986 with all the associated security issues.
4988 X509_TRUST_COMPAT is the old trust behaviour: only and
4989 automatically trust self signed roots in certificate store. A
4990 new trust setting X509_TRUST_DEFAULT is used to specify that
4991 a purpose has no associated trust setting and it should instead
4992 use the value in the default purpose.
4995 *) Fix the PKCS#8 DSA private key code so it decodes keys again
4996 and fix a memory leak.
4999 *) In util/mkerr.pl (which implements 'make errors'), preserve
5000 reason strings from the previous version of the .c file, as
5001 the default to have only downcase letters (and digits) in
5002 automatically generated reasons codes is not always appropriate.
5005 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
5006 using strerror. Previously, ERR_reason_error_string() returned
5007 library names as reason strings for SYSerr; but SYSerr is a special
5008 case where small numbers are errno values, not library numbers.
5011 *) Add '-dsaparam' option to 'openssl dhparam' application. This
5012 converts DSA parameters into DH parameters. (When creating parameters,
5013 DSA_generate_parameters is used.)
5016 *) Include 'length' (recommended exponent length) in C code generated
5017 by 'openssl dhparam -C'.
5020 *) The second argument to set_label in perlasm was already being used
5021 so couldn't be used as a "file scope" flag. Moved to third argument
5025 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
5026 instead of RAND_bytes for encryption IVs and salts.
5029 *) Include RAND_status() into RAND_METHOD instead of implementing
5030 it only for md_rand.c Otherwise replacing the PRNG by calling
5031 RAND_set_rand_method would be impossible.
5034 *) Don't let DSA_generate_key() enter an infinite loop if the random
5035 number generation fails.
5038 *) New 'rand' application for creating pseudo-random output.
5041 *) Added configuration support for Linux/IA64
5042 [Rolf Haberrecker <rolf@suse.de>]
5044 *) Assembler module support for Mingw32.
5047 *) Shared library support for HPUX (in shlib/).
5048 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
5050 *) Shared library support for Solaris gcc.
5051 [Lutz Behnke <behnke@trustcenter.de>]
5053 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
5055 *) PKCS7_encrypt() was adding text MIME headers twice because they
5056 were added manually and by SMIME_crlf_copy().
5059 *) In bntest.c don't call BN_rand with zero bits argument.
5060 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
5062 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
5063 case was implemented. This caused BN_div_recp() to fail occasionally.
5066 *) Add an optional second argument to the set_label() in the perl
5067 assembly language builder. If this argument exists and is set
5068 to 1 it signals that the assembler should use a symbol whose
5069 scope is the entire file, not just the current function. This
5070 is needed with MASM which uses the format label:: for this scope.
5071 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
5073 *) Change the ASN1 types so they are typedefs by default. Before
5074 almost all types were #define'd to ASN1_STRING which was causing
5075 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
5079 *) Change names of new functions to the new get1/get0 naming
5080 convention: After 'get1', the caller owns a reference count
5081 and has to call ..._free; 'get0' returns a pointer to some
5082 data structure without incrementing reference counters.
5083 (Some of the existing 'get' functions increment a reference
5084 counter, some don't.)
5085 Similarly, 'set1' and 'add1' functions increase reference
5086 counters or duplicate objects.
5089 *) Allow for the possibility of temp RSA key generation failure:
5090 the code used to assume it always worked and crashed on failure.
5093 *) Fix potential buffer overrun problem in BIO_printf().
5094 [Ulf Möller, using public domain code by Patrick Powell; problem
5095 pointed out by David Sacerdote <das33@cornell.edu>]
5097 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
5098 RAND_egd() and RAND_status(). In the command line application,
5099 the EGD socket can be specified like a seed file using RANDFILE
5103 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
5104 Some CAs (e.g. Verisign) distribute certificates in this form.
5107 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
5108 list to exclude them. This means that no special compilation option
5109 is needed to use anonymous DH: it just needs to be included in the
5113 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
5114 EVP_MD_type. The old functionality is available in a new macro called
5115 EVP_MD_md(). Change code that uses it and update docs.
5118 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
5119 where the 'void *' argument is replaced by a function pointer argument.
5120 Previously 'void *' was abused to point to functions, which works on
5121 many platforms, but is not correct. As these functions are usually
5122 called by macros defined in OpenSSL header files, most source code
5123 should work without changes.
5126 *) <openssl/opensslconf.h> (which is created by Configure) now contains
5127 sections with information on -D... compiler switches used for
5128 compiling the library so that applications can see them. To enable
5129 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
5130 must be defined. E.g.,
5131 #define OPENSSL_ALGORITHM_DEFINES
5132 #include <openssl/opensslconf.h>
5133 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
5134 [Richard Levitte, Ulf and Bodo Möller]
5136 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
5140 *) Change the 'other' type in certificate aux info to a STACK_OF
5141 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
5142 the required ASN1 format: arbitrary types determined by an OID.
5145 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
5146 argument to 'req'. This is not because the function is newer or
5147 better than others it just uses the work 'NEW' in the certificate
5148 request header lines. Some software needs this.
5151 *) Reorganise password command line arguments: now passwords can be
5152 obtained from various sources. Delete the PEM_cb function and make
5153 it the default behaviour: i.e. if the callback is NULL and the
5154 usrdata argument is not NULL interpret it as a null terminated pass
5155 phrase. If usrdata and the callback are NULL then the pass phrase
5156 is prompted for as usual.
5159 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
5160 the support is automatically enabled. The resulting binaries will
5161 autodetect the card and use it if present.
5162 [Ben Laurie and Compaq Inc.]
5164 *) Work around for Netscape hang bug. This sends certificate request
5165 and server done in one record. Since this is perfectly legal in the
5166 SSL/TLS protocol it isn't a "bug" option and is on by default. See
5167 the bugs/SSLv3 entry for more info.
5170 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
5173 *) Add -rand argument to smime and pkcs12 applications and read/write
5177 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
5180 *) Add command line password options to the remaining applications.
5183 *) Bug fix for BN_div_recp() for numerators with an even number of
5187 *) More tests in bntest.c, and changed test_bn output.
5190 *) ./config recognizes MacOS X now.
5193 *) Bug fix for BN_div() when the first words of num and divsor are
5194 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
5197 *) Add support for various broken PKCS#8 formats, and command line
5198 options to produce them.
5201 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
5202 get temporary BIGNUMs from a BN_CTX.
5205 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
5209 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
5210 include a #define from the old name to the new. The original intent
5211 was that statically linked binaries could for example just call
5212 SSLeay_add_all_ciphers() to just add ciphers to the table and not
5213 link with digests. This never worked becayse SSLeay_add_all_digests()
5214 and SSLeay_add_all_ciphers() were in the same source file so calling
5215 one would link with the other. They are now in separate source files.
5218 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
5221 *) Use a less unusual form of the Miller-Rabin primality test (it used
5222 a binary algorithm for exponentiation integrated into the Miller-Rabin
5223 loop, our standard modexp algorithms are faster).
5226 *) Support for the EBCDIC character set completed.
5227 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
5229 *) Source code cleanups: use const where appropriate, eliminate casts,
5230 use void * instead of char * in lhash.
5233 *) Bugfix: ssl3_send_server_key_exchange was not restartable
5234 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
5235 this the server could overwrite ephemeral keys that the client
5239 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
5240 using 50 iterations of the Rabin-Miller test.
5242 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
5243 iterations of the Rabin-Miller test as required by the appendix
5244 to FIPS PUB 186[-1]) instead of DSA_is_prime.
5245 As BN_is_prime_fasttest includes trial division, DSA parameter
5246 generation becomes much faster.
5248 This implies a change for the callback functions in DSA_is_prime
5249 and DSA_generate_parameters: The callback function is called once
5250 for each positive witness in the Rabin-Miller test, not just
5251 occasionally in the inner loop; and the parameters to the
5252 callback function now provide an iteration count for the outer
5253 loop rather than for the current invocation of the inner loop.
5254 DSA_generate_parameters additionally can call the callback
5255 function with an 'iteration count' of -1, meaning that a
5256 candidate has passed the trial division test (when q is generated
5257 from an application-provided seed, trial division is skipped).
5260 *) New function BN_is_prime_fasttest that optionally does trial
5261 division before starting the Rabin-Miller test and has
5262 an additional BN_CTX * argument (whereas BN_is_prime always
5263 has to allocate at least one BN_CTX).
5264 'callback(1, -1, cb_arg)' is called when a number has passed the
5265 trial division stage.
5268 *) Fix for bug in CRL encoding. The validity dates weren't being handled
5272 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
5275 *) New function BN_pseudo_rand().
5278 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
5279 bignum version of BN_from_montgomery() with the working code from
5280 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
5284 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
5285 made it impossible to use the same SSL_SESSION data structure in
5286 SSL2 clients in multiple threads.
5289 *) The return value of RAND_load_file() no longer counts bytes obtained
5290 by stat(). RAND_load_file(..., -1) is new and uses the complete file
5291 to seed the PRNG (previously an explicit byte count was required).
5292 [Ulf Möller, Bodo Möller]
5294 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
5295 used (char *) instead of (void *) and had casts all over the place.
5298 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
5301 *) Retain source code compatibility for BN_prime_checks macro:
5302 BN_is_prime(..., BN_prime_checks, ...) now uses
5303 BN_prime_checks_for_size to determine the appropriate number of
5304 Rabin-Miller iterations.
5307 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
5308 DH_CHECK_P_NOT_SAFE_PRIME.
5309 (Check if this is true? OpenPGP calls them "strong".)
5312 *) Merge the functionality of "dh" and "gendh" programs into a new program
5313 "dhparam". The old programs are retained for now but will handle DH keys
5314 (instead of parameters) in future.
5317 *) Make the ciphers, s_server and s_client programs check the return values
5318 when a new cipher list is set.
5321 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
5322 ciphers. Before when the 56bit ciphers were enabled the sorting was
5325 The syntax for the cipher sorting has been extended to support sorting by
5326 cipher-strength (using the strength_bits hard coded in the tables).
5327 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
5329 Fix a bug in the cipher-command parser: when supplying a cipher command
5330 string with an "undefined" symbol (neither command nor alphanumeric
5331 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
5332 an error is flagged.
5334 Due to the strength-sorting extension, the code of the
5335 ssl_create_cipher_list() function was completely rearranged. I hope that
5336 the readability was also increased :-)
5337 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
5339 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
5340 for the first serial number and places 2 in the serial number file. This
5341 avoids problems when the root CA is created with serial number zero and
5342 the first user certificate has the same issuer name and serial number
5346 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
5347 the new code. Add documentation for this stuff.
5350 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
5351 X509_*() to X509at_*() on the grounds that they don't handle X509
5352 structures and behave in an analagous way to the X509v3 functions:
5353 they shouldn't be called directly but wrapper functions should be used
5356 So we also now have some wrapper functions that call the X509at functions
5357 when passed certificate requests. (TO DO: similar things can be done with
5358 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
5359 things. Some of these need some d2i or i2d and print functionality
5360 because they handle more complex structures.)
5363 *) Add missing #ifndefs that caused missing symbols when building libssl
5364 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
5365 NO_RSA in ssl/s2*.c.
5366 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
5368 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
5369 has a return value which indicates the quality of the random data
5370 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
5371 error queue. New function RAND_pseudo_bytes() generates output that is
5372 guaranteed to be unique but not unpredictable. RAND_add is like
5373 RAND_seed, but takes an extra argument for an entropy estimate
5374 (RAND_seed always assumes full entropy).
5377 *) Do more iterations of Rabin-Miller probable prime test (specifically,
5378 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
5379 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
5380 in crypto/bn/bn_prime.c for the complete table). This guarantees a
5381 false-positive rate of at most 2^-80 for random input.
5384 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
5387 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
5388 in the 0.9.5 release), this returns the chain
5389 from an X509_CTX structure with a dup of the stack and all
5390 the X509 reference counts upped: so the stack will exist
5391 after X509_CTX_cleanup() has been called. Modify pkcs12.c
5394 Also make SSL_SESSION_print() print out the verify return
5398 *) Add manpage for the pkcs12 command. Also change the default
5399 behaviour so MAC iteration counts are used unless the new
5400 -nomaciter option is used. This improves file security and
5401 only older versions of MSIE (4.0 for example) need it.
5404 *) Honor the no-xxx Configure options when creating .DEF files.
5407 *) Add PKCS#10 attributes to field table: challengePassword,
5408 unstructuredName and unstructuredAddress. These are taken from
5409 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
5410 international characters are used.
5412 More changes to X509_ATTRIBUTE code: allow the setting of types
5413 based on strings. Remove the 'loc' parameter when adding
5414 attributes because these will be a SET OF encoding which is sorted
5418 *) Initial changes to the 'req' utility to allow request generation
5419 automation. This will allow an application to just generate a template
5420 file containing all the field values and have req construct the
5423 Initial support for X509_ATTRIBUTE handling. Stacks of these are
5424 used all over the place including certificate requests and PKCS#7
5425 structures. They are currently handled manually where necessary with
5426 some primitive wrappers for PKCS#7. The new functions behave in a
5427 manner analogous to the X509 extension functions: they allow
5428 attributes to be looked up by NID and added.
5430 Later something similar to the X509V3 code would be desirable to
5431 automatically handle the encoding, decoding and printing of the
5432 more complex types. The string types like challengePassword can
5433 be handled by the string table functions.
5435 Also modified the multi byte string table handling. Now there is
5436 a 'global mask' which masks out certain types. The table itself
5437 can use the flag STABLE_NO_MASK to ignore the mask setting: this
5438 is useful when for example there is only one permissible type
5439 (as in countryName) and using the mask might result in no valid
5443 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
5444 SSL_get_peer_finished to allow applications to obtain the latest
5445 Finished messages sent to the peer or expected from the peer,
5446 respectively. (SSL_get_peer_finished is usually the Finished message
5447 actually received from the peer, otherwise the protocol will be aborted.)
5449 As the Finished message are message digests of the complete handshake
5450 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
5451 be used for external authentication procedures when the authentication
5452 provided by SSL/TLS is not desired or is not enough.
5455 *) Enhanced support for Alpha Linux is added. Now ./config checks if
5456 the host supports BWX extension and if Compaq C is present on the
5457 $PATH. Just exploiting of the BWX extension results in 20-30%
5458 performance kick for some algorithms, e.g. DES and RC4 to mention
5459 a couple. Compaq C in turn generates ~20% faster code for MD5 and
5463 *) Add support for MS "fast SGC". This is arguably a violation of the
5464 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
5465 weak crypto and after checking the certificate is SGC a second one
5466 with strong crypto. MS SGC stops the first handshake after receiving
5467 the server certificate message and sends a second client hello. Since
5468 a server will typically do all the time consuming operations before
5469 expecting any further messages from the client (server key exchange
5470 is the most expensive) there is little difference between the two.
5472 To get OpenSSL to support MS SGC we have to permit a second client
5473 hello message after we have sent server done. In addition we have to
5474 reset the MAC if we do get this second client hello.
5477 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
5478 if a DER encoded private key is RSA or DSA traditional format. Changed
5479 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
5480 format DER encoded private key. Newer code should use PKCS#8 format which
5481 has the key type encoded in the ASN1 structure. Added DER private key
5482 support to pkcs8 application.
5485 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
5486 ciphersuites has been selected (as required by the SSL 3/TLS 1
5487 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
5488 is set, we interpret this as a request to violate the specification
5489 (the worst that can happen is a handshake failure, and 'correct'
5490 behaviour would result in a handshake failure anyway).
5493 *) In SSL_CTX_add_session, take into account that there might be multiple
5494 SSL_SESSION structures with the same session ID (e.g. when two threads
5495 concurrently obtain them from an external cache).
5496 The internal cache can handle only one SSL_SESSION with a given ID,
5497 so if there's a conflict, we now throw out the old one to achieve
5501 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
5502 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
5503 some routines that use cipher OIDs: some ciphers do not have OIDs
5504 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
5508 *) Simplify the trust setting structure and code. Now we just have
5509 two sequences of OIDs for trusted and rejected settings. These will
5510 typically have values the same as the extended key usage extension
5511 and any application specific purposes.
5513 The trust checking code now has a default behaviour: it will just
5514 check for an object with the same NID as the passed id. Functions can
5515 be provided to override either the default behaviour or the behaviour
5516 for a given id. SSL client, server and email already have functions
5517 in place for compatibility: they check the NID and also return "trusted"
5518 if the certificate is self signed.
5521 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
5522 traditional format into an EVP_PKEY structure.
5525 *) Add a password callback function PEM_cb() which either prompts for
5526 a password if usr_data is NULL or otherwise assumes it is a null
5527 terminated password. Allow passwords to be passed on command line
5528 environment or config files in a few more utilities.
5531 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
5532 keys. Add some short names for PKCS#8 PBE algorithms and allow them
5533 to be specified on the command line for the pkcs8 and pkcs12 utilities.
5534 Update documentation.
5537 *) Support for ASN1 "NULL" type. This could be handled before by using
5538 ASN1_TYPE but there wasn't any function that would try to read a NULL
5539 and produce an error if it couldn't. For compatibility we also have
5540 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
5541 don't allocate anything because they don't need to.
5544 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
5546 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
5548 *) Rebuild of the memory allocation routines used by OpenSSL code and
5549 possibly others as well. The purpose is to make an interface that
5550 provide hooks so anyone can build a separate set of allocation and
5551 deallocation routines to be used by OpenSSL, for example memory
5552 pool implementations, or something else, which was previously hard
5553 since Malloc(), Realloc() and Free() were defined as macros having
5554 the values malloc, realloc and free, respectively (except for Win32
5555 compilations). The same is provided for memory debugging code.
5556 OpenSSL already comes with functionality to find memory leaks, but
5557 this gives people a chance to debug other memory problems.
5559 With these changes, a new set of functions and macros have appeared:
5561 CRYPTO_set_mem_debug_functions() [F]
5562 CRYPTO_get_mem_debug_functions() [F]
5563 CRYPTO_dbg_set_options() [F]
5564 CRYPTO_dbg_get_options() [F]
5565 CRYPTO_malloc_debug_init() [M]
5567 The memory debug functions are NULL by default, unless the library
5568 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
5569 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
5570 gives the standard debugging functions that come with OpenSSL) or
5571 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
5572 provided by the library user) must be used. When the standard
5573 debugging functions are used, CRYPTO_dbg_set_options can be used to
5574 request additional information:
5575 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
5576 the CRYPTO_MDEBUG_xxx macro when compiling the library.
5578 Also, things like CRYPTO_set_mem_functions will always give the
5579 expected result (the new set of functions is used for allocation
5580 and deallocation) at all times, regardless of platform and compiler
5583 To finish it up, some functions that were never use in any other
5584 way than through macros have a new API and new semantic:
5587 CRYPTO_dbg_realloc()
5590 All macros of value have retained their old syntax.
5591 [Richard Levitte and Bodo Moeller]
5593 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
5594 ordering of SMIMECapabilities wasn't in "strength order" and there
5595 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
5599 *) Some ASN1 types with illegal zero length encoding (INTEGER,
5600 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
5601 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
5603 *) Merge in my S/MIME library for OpenSSL. This provides a simple
5604 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
5605 functionality to handle multipart/signed properly) and a utility
5606 called 'smime' to call all this stuff. This is based on code I
5607 originally wrote for Celo who have kindly allowed it to be
5608 included in OpenSSL.
5611 *) Add variants des_set_key_checked and des_set_key_unchecked of
5612 des_set_key (aka des_key_sched). Global variable des_check_key
5613 decides which of these is called by des_set_key; this way
5614 des_check_key behaves as it always did, but applications and
5615 the library itself, which was buggy for des_check_key == 1,
5616 have a cleaner way to pick the version they need.
5619 *) New function PKCS12_newpass() which changes the password of a
5623 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
5624 dynamic mix. In both cases the ids can be used as an index into the
5625 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
5626 functions so they accept a list of the field values and the
5627 application doesn't need to directly manipulate the X509_TRUST
5631 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
5635 *) Modify the way the V3 extension code looks up extensions. This now
5636 works in a similar way to the object code: we have some "standard"
5637 extensions in a static table which is searched with OBJ_bsearch()
5638 and the application can add dynamic ones if needed. The file
5639 crypto/x509v3/ext_dat.h now has the info: this file needs to be
5640 updated whenever a new extension is added to the core code and kept
5641 in ext_nid order. There is a simple program 'tabtest.c' which checks
5642 this. New extensions are not added too often so this file can readily
5643 be maintained manually.
5645 There are two big advantages in doing things this way. The extensions
5646 can be looked up immediately and no longer need to be "added" using
5647 X509V3_add_standard_extensions(): this function now does nothing.
5648 [Side note: I get *lots* of email saying the extension code doesn't
5649 work because people forget to call this function]
5650 Also no dynamic allocation is done unless new extensions are added:
5651 so if we don't add custom extensions there is no need to call
5652 X509V3_EXT_cleanup().
5655 *) Modify enc utility's salting as follows: make salting the default. Add a
5656 magic header, so unsalted files fail gracefully instead of just decrypting
5657 to garbage. This is because not salting is a big security hole, so people
5658 should be discouraged from doing it.
5661 *) Fixes and enhancements to the 'x509' utility. It allowed a message
5662 digest to be passed on the command line but it only used this
5663 parameter when signing a certificate. Modified so all relevant
5664 operations are affected by the digest parameter including the
5665 -fingerprint and -x509toreq options. Also -x509toreq choked if a
5666 DSA key was used because it didn't fix the digest.
5669 *) Initial certificate chain verify code. Currently tests the untrusted
5670 certificates for consistency with the verify purpose (which is set
5671 when the X509_STORE_CTX structure is set up) and checks the pathlength.
5673 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
5674 this is because it will reject chains with invalid extensions whereas
5675 every previous version of OpenSSL and SSLeay made no checks at all.
5677 Trust code: checks the root CA for the relevant trust settings. Trust
5678 settings have an initial value consistent with the verify purpose: e.g.
5679 if the verify purpose is for SSL client use it expects the CA to be
5680 trusted for SSL client use. However the default value can be changed to
5681 permit custom trust settings: one example of this would be to only trust
5682 certificates from a specific "secure" set of CAs.
5684 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
5685 which should be used for version portability: especially since the
5686 verify structure is likely to change more often now.
5688 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
5689 to set them. If not set then assume SSL clients will verify SSL servers
5692 Two new options to the verify program: -untrusted allows a set of
5693 untrusted certificates to be passed in and -purpose which sets the
5694 intended purpose of the certificate. If a purpose is set then the
5695 new chain verify code is used to check extension consistency.
5698 *) Support for the authority information access extension.
5701 *) Modify RSA and DSA PEM read routines to transparently handle
5702 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
5703 public keys in a format compatible with certificate
5704 SubjectPublicKeyInfo structures. Unfortunately there were already
5705 functions called *_PublicKey_* which used various odd formats so
5706 these are retained for compatibility: however the DSA variants were
5707 never in a public release so they have been deleted. Changed dsa/rsa
5708 utilities to handle the new format: note no releases ever handled public
5709 keys so we should be OK.
5711 The primary motivation for this change is to avoid the same fiasco
5712 that dogs private keys: there are several incompatible private key
5713 formats some of which are standard and some OpenSSL specific and
5714 require various evil hacks to allow partial transparent handling and
5715 even then it doesn't work with DER formats. Given the option anything
5716 other than PKCS#8 should be dumped: but the other formats have to
5717 stay in the name of compatibility.
5719 With public keys and the benefit of hindsight one standard format
5720 is used which works with EVP_PKEY, RSA or DSA structures: though
5721 it clearly returns an error if you try to read the wrong kind of key.
5723 Added a -pubkey option to the 'x509' utility to output the public key.
5724 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
5725 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
5726 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
5727 that do the same as the EVP_PKEY_assign_*() except they up the
5728 reference count of the added key (they don't "swallow" the
5732 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
5733 CRLs would fail if the file contained no certificates or no CRLs:
5734 added a new function to read in both types and return the number
5735 read: this means that if none are read it will be an error. The
5736 DER versions of the certificate and CRL reader would always fail
5737 because it isn't possible to mix certificates and CRLs in DER format
5738 without choking one or the other routine. Changed this to just read
5739 a certificate: this is the best we can do. Also modified the code
5740 in apps/verify.c to take notice of return codes: it was previously
5741 attempting to read in certificates from NULL pointers and ignoring
5742 any errors: this is one reason why the cert and CRL reader seemed
5743 to work. It doesn't check return codes from the default certificate
5744 routines: these may well fail if the certificates aren't installed.
5747 *) Code to support otherName option in GeneralName.
5750 *) First update to verify code. Change the verify utility
5751 so it warns if it is passed a self signed certificate:
5752 for consistency with the normal behaviour. X509_verify
5753 has been modified to it will now verify a self signed
5754 certificate if *exactly* the same certificate appears
5755 in the store: it was previously impossible to trust a
5756 single self signed certificate. This means that:
5757 openssl verify ss.pem
5758 now gives a warning about a self signed certificate but
5759 openssl verify -CAfile ss.pem ss.pem
5763 *) For servers, store verify_result in SSL_SESSION data structure
5764 (and add it to external session representation).
5765 This is needed when client certificate verifications fails,
5766 but an application-provided verification callback (set by
5767 SSL_CTX_set_cert_verify_callback) allows accepting the session
5768 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
5769 but returns 1): When the session is reused, we have to set
5770 ssl->verify_result to the appropriate error code to avoid
5772 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
5774 *) Fix a bug in the new PKCS#7 code: it didn't consider the
5775 case in PKCS7_dataInit() where the signed PKCS7 structure
5776 didn't contain any existing data because it was being created.
5777 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
5779 *) Add a salt to the key derivation routines in enc.c. This
5780 forms the first 8 bytes of the encrypted file. Also add a
5781 -S option to allow a salt to be input on the command line.
5784 *) New function X509_cmp(). Oddly enough there wasn't a function
5785 to compare two certificates. We do this by working out the SHA1
5786 hash and comparing that. X509_cmp() will be needed by the trust
5790 *) SSL_get1_session() is like SSL_get_session(), but increments
5791 the reference count in the SSL_SESSION returned.
5792 [Geoff Thorpe <geoff@eu.c2.net>]
5794 *) Fix for 'req': it was adding a null to request attributes.
5795 Also change the X509_LOOKUP and X509_INFO code to handle
5796 certificate auxiliary information.
5799 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
5803 *) Add the possibility to add extra information to the memory leak
5804 detecting output, to form tracebacks, showing from where each
5805 allocation was originated: CRYPTO_push_info("constant string") adds
5806 the string plus current file name and line number to a per-thread
5807 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
5808 is like calling CYRPTO_pop_info() until the stack is empty.
5809 Also updated memory leak detection code to be multi-thread-safe.
5812 *) Add options -text and -noout to pkcs7 utility and delete the
5813 encryption options which never did anything. Update docs.
5816 *) Add options to some of the utilities to allow the pass phrase
5817 to be included on either the command line (not recommended on
5818 OSes like Unix) or read from the environment. Update the
5819 manpages and fix a few bugs.
5822 *) Add a few manpages for some of the openssl commands.
5825 *) Fix the -revoke option in ca. It was freeing up memory twice,
5826 leaking and not finding already revoked certificates.
5829 *) Extensive changes to support certificate auxiliary information.
5830 This involves the use of X509_CERT_AUX structure and X509_AUX
5831 functions. An X509_AUX function such as PEM_read_X509_AUX()
5832 can still read in a certificate file in the usual way but it
5833 will also read in any additional "auxiliary information". By
5834 doing things this way a fair degree of compatibility can be
5835 retained: existing certificates can have this information added
5836 using the new 'x509' options.
5838 Current auxiliary information includes an "alias" and some trust
5839 settings. The trust settings will ultimately be used in enhanced
5840 certificate chain verification routines: currently a certificate
5841 can only be trusted if it is self signed and then it is trusted
5845 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
5846 The problem was that one of the replacement routines had not been working
5847 since SSLeay releases. For now the offending routine has been replaced
5848 with non-optimised assembler. Even so, this now gives around 95%
5849 performance improvement for 1024 bit RSA signs.
5852 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
5853 handling. Most clients have the effective key size in bits equal to
5854 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
5855 A few however don't do this and instead use the size of the decrypted key
5856 to determine the RC2 key length and the AlgorithmIdentifier to determine
5857 the effective key length. In this case the effective key length can still
5858 be 40 bits but the key length can be 168 bits for example. This is fixed
5859 by manually forcing an RC2 key into the EVP_PKEY structure because the
5860 EVP code can't currently handle unusual RC2 key sizes: it always assumes
5861 the key length and effective key length are equal.
5864 *) Add a bunch of functions that should simplify the creation of
5865 X509_NAME structures. Now you should be able to do:
5866 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
5867 and have it automatically work out the correct field type and fill in
5868 the structures. The more adventurous can try:
5869 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
5870 and it will (hopefully) work out the correct multibyte encoding.
5873 *) Change the 'req' utility to use the new field handling and multibyte
5874 copy routines. Before the DN field creation was handled in an ad hoc
5875 way in req, ca, and x509 which was rather broken and didn't support
5876 BMPStrings or UTF8Strings. Since some software doesn't implement
5877 BMPStrings or UTF8Strings yet, they can be enabled using the config file
5878 using the dirstring_type option. See the new comment in the default
5879 openssl.cnf for more info.
5882 *) Make crypto/rand/md_rand.c more robust:
5883 - Assure unique random numbers after fork().
5884 - Make sure that concurrent threads access the global counter and
5885 md serializably so that we never lose entropy in them
5886 or use exactly the same state in multiple threads.
5887 Access to the large state is not always serializable because
5888 the additional locking could be a performance killer, and
5889 md should be large enough anyway.
5892 *) New file apps/app_rand.c with commonly needed functionality
5893 for handling the random seed file.
5895 Use the random seed file in some applications that previously did not:
5897 dsaparam -genkey (which also ignored its '-rand' option),
5900 x509 (when signing).
5901 Except on systems with /dev/urandom, it is crucial to have a random
5902 seed file at least for key creation, DSA signing, and for DH exchanges;
5903 for RSA signatures we could do without one.
5905 gendh and gendsa (unlike genrsa) used to read only the first byte
5906 of each file listed in the '-rand' option. The function as previously
5907 found in genrsa is now in app_rand.c and is used by all programs
5908 that support '-rand'.
5911 *) In RAND_write_file, use mode 0600 for creating files;
5912 don't just chmod when it may be too late.
5915 *) Report an error from X509_STORE_load_locations
5916 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
5919 *) New function ASN1_mbstring_copy() this copies a string in either
5920 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
5921 into an ASN1_STRING type. A mask of permissible types is passed
5922 and it chooses the "minimal" type to use or an error if not type
5926 *) Add function equivalents to the various macros in asn1.h. The old
5927 macros are retained with an M_ prefix. Code inside the library can
5928 use the M_ macros. External code (including the openssl utility)
5929 should *NOT* in order to be "shared library friendly".
5932 *) Add various functions that can check a certificate's extensions
5933 to see if it usable for various purposes such as SSL client,
5934 server or S/MIME and CAs of these types. This is currently
5935 VERY EXPERIMENTAL but will ultimately be used for certificate chain
5936 verification. Also added a -purpose flag to x509 utility to
5937 print out all the purposes.
5940 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
5944 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
5945 for, obtain and decode and extension and obtain its critical flag.
5946 This allows all the necessary extension code to be handled in a
5947 single function call.
5950 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
5951 platforms. See crypto/rc4/rc4_enc.c for further details.
5954 *) New -noout option to asn1parse. This causes no output to be produced
5955 its main use is when combined with -strparse and -out to extract data
5956 from a file (which may not be in ASN.1 format).
5959 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
5960 when producing the local key id.
5961 [Richard Levitte <levitte@stacken.kth.se>]
5963 *) New option -dhparam in s_server. This allows a DH parameter file to be
5964 stated explicitly. If it is not stated then it tries the first server
5965 certificate file. The previous behaviour hard coded the filename
5969 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
5970 a public key to be input or output. For example:
5971 openssl rsa -in key.pem -pubout -out pubkey.pem
5972 Also added necessary DSA public key functions to handle this.
5975 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
5976 in the message. This was handled by allowing
5977 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
5978 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
5980 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
5981 to the end of the strings whereas this didn't. This would cause problems
5982 if strings read with d2i_ASN1_bytes() were later modified.
5983 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
5985 *) Fix for base64 decode bug. When a base64 bio reads only one line of
5986 data and it contains EOF it will end up returning an error. This is
5987 caused by input 46 bytes long. The cause is due to the way base64
5988 BIOs find the start of base64 encoded data. They do this by trying a
5989 trial decode on each line until they find one that works. When they
5990 do a flag is set and it starts again knowing it can pass all the
5991 data directly through the decoder. Unfortunately it doesn't reset
5992 the context it uses. This means that if EOF is reached an attempt
5993 is made to pass two EOFs through the context and this causes the
5994 resulting error. This can also cause other problems as well. As is
5995 usual with these problems it takes *ages* to find and the fix is
5996 trivial: move one line.
5997 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
5999 *) Ugly workaround to get s_client and s_server working under Windows. The
6000 old code wouldn't work because it needed to select() on sockets and the
6001 tty (for keypresses and to see if data could be written). Win32 only
6002 supports select() on sockets so we select() with a 1s timeout on the
6003 sockets and then see if any characters are waiting to be read, if none
6004 are present then we retry, we also assume we can always write data to
6005 the tty. This isn't nice because the code then blocks until we've
6006 received a complete line of data and it is effectively polling the
6007 keyboard at 1s intervals: however it's quite a bit better than not
6008 working at all :-) A dedicated Windows application might handle this
6009 with an event loop for example.
6012 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
6013 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
6014 will be called when RSA_sign() and RSA_verify() are used. This is useful
6015 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
6016 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
6017 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
6018 This necessitated the support of an extra signature type NID_md5_sha1
6019 for SSL signatures and modifications to the SSL library to use it instead
6020 of calling RSA_public_decrypt() and RSA_private_encrypt().
6023 *) Add new -verify -CAfile and -CApath options to the crl program, these
6024 will lookup a CRL issuers certificate and verify the signature in a
6025 similar way to the verify program. Tidy up the crl program so it
6026 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
6027 less strict. It will now permit CRL extensions even if it is not
6028 a V2 CRL: this will allow it to tolerate some broken CRLs.
6031 *) Initialize all non-automatic variables each time one of the openssl
6032 sub-programs is started (this is necessary as they may be started
6033 multiple times from the "OpenSSL>" prompt).
6034 [Lennart Bang, Bodo Moeller]
6036 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
6037 removing all other RSA functionality (this is what NO_RSA does). This
6038 is so (for example) those in the US can disable those operations covered
6039 by the RSA patent while allowing storage and parsing of RSA keys and RSA
6043 *) Non-copying interface to BIO pairs.
6044 (still largely untested)
6047 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
6048 ASCII string. This was handled independently in various places before.
6051 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
6052 UTF8 strings a character at a time.
6055 *) Use client_version from client hello to select the protocol
6056 (s23_srvr.c) and for RSA client key exchange verification
6057 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
6060 *) Add various utility functions to handle SPKACs, these were previously
6061 handled by poking round in the structure internals. Added new function
6062 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
6063 print, verify and generate SPKACs. Based on an original idea from
6064 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
6067 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
6070 *) Allow the config file extension section to be overwritten on the
6071 command line. Based on an original idea from Massimiliano Pala
6072 <madwolf@comune.modena.it>. The new option is called -extensions
6073 and can be applied to ca, req and x509. Also -reqexts to override
6074 the request extensions in req and -crlexts to override the crl extensions
6078 *) Add new feature to the SPKAC handling in ca. Now you can include
6079 the same field multiple times by preceding it by "XXXX." for example:
6082 this is the same syntax as used in the req config file.
6085 *) Allow certificate extensions to be added to certificate requests. These
6086 are specified in a 'req_extensions' option of the req section of the
6087 config file. They can be printed out with the -text option to req but
6088 are otherwise ignored at present.
6091 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
6092 data read consists of only the final block it would not decrypted because
6093 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
6094 A misplaced 'break' also meant the decrypted final block might not be
6095 copied until the next read.
6098 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
6099 a few extra parameters to the DH structure: these will be useful if
6100 for example we want the value of 'q' or implement X9.42 DH.
6103 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
6104 provides hooks that allow the default DSA functions or functions on a
6105 "per key" basis to be replaced. This allows hardware acceleration and
6106 hardware key storage to be handled without major modification to the
6107 library. Also added low level modexp hooks and CRYPTO_EX structure and
6108 associated functions.
6111 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
6112 as "read only": it can't be written to and the buffer it points to will
6113 not be freed. Reading from a read only BIO is much more efficient than
6114 a normal memory BIO. This was added because there are several times when
6115 an area of memory needs to be read from a BIO. The previous method was
6116 to create a memory BIO and write the data to it, this results in two
6117 copies of the data and an O(n^2) reading algorithm. There is a new
6118 function BIO_new_mem_buf() which creates a read only memory BIO from
6119 an area of memory. Also modified the PKCS#7 routines to use read only
6123 *) Bugfix: ssl23_get_client_hello did not work properly when called in
6124 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
6125 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
6126 but a retry condition occured while trying to read the rest.
6129 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
6130 NID_pkcs7_encrypted by default: this was wrong since this should almost
6131 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
6132 the encrypted data type: this is a more sensible place to put it and it
6133 allows the PKCS#12 code to be tidied up that duplicated this
6137 *) Changed obj_dat.pl script so it takes its input and output files on
6138 the command line. This should avoid shell escape redirection problems
6142 *) Initial support for certificate extension requests, these are included
6143 in things like Xenroll certificate requests. Included functions to allow
6144 extensions to be obtained and added.
6147 *) -crlf option to s_client and s_server for sending newlines as
6148 CRLF (as required by many protocols).
6151 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
6153 *) Install libRSAglue.a when OpenSSL is built with RSAref.
6154 [Ralf S. Engelschall]
6156 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
6157 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
6159 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
6163 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
6164 DH parameters/keys (q is lost during that conversion, but the resulting
6165 DH parameters contain its length).
6167 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
6168 much faster than DH_generate_parameters (which creates parameters
6169 where p = 2*q + 1), and also the smaller q makes DH computations
6170 much more efficient (160-bit exponentiation instead of 1024-bit
6171 exponentiation); so this provides a convenient way to support DHE
6172 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
6173 utter importance to use
6174 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6176 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6177 when such DH parameters are used, because otherwise small subgroup
6178 attacks may become possible!
6181 *) Avoid memory leak in i2d_DHparams.
6184 *) Allow the -k option to be used more than once in the enc program:
6185 this allows the same encrypted message to be read by multiple recipients.
6188 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
6189 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
6190 it will always use the numerical form of the OID, even if it has a short
6194 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
6195 method only got called if p,q,dmp1,dmq1,iqmp components were present,
6196 otherwise bn_mod_exp was called. In the case of hardware keys for example
6197 no private key components need be present and it might store extra data
6198 in the RSA structure, which cannot be accessed from bn_mod_exp.
6199 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
6200 private key operations.
6203 *) Added support for SPARC Linux.
6206 *) pem_password_cb function type incompatibly changed from
6207 typedef int pem_password_cb(char *buf, int size, int rwflag);
6209 ....(char *buf, int size, int rwflag, void *userdata);
6210 so that applications can pass data to their callbacks:
6211 The PEM[_ASN1]_{read,write}... functions and macros now take an
6212 additional void * argument, which is just handed through whenever
6213 the password callback is called.
6214 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
6216 New function SSL_CTX_set_default_passwd_cb_userdata.
6218 Compatibility note: As many C implementations push function arguments
6219 onto the stack in reverse order, the new library version is likely to
6220 interoperate with programs that have been compiled with the old
6221 pem_password_cb definition (PEM_whatever takes some data that
6222 happens to be on the stack as its last argument, and the callback
6223 just ignores this garbage); but there is no guarantee whatsoever that
6226 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
6227 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
6228 problems not only on Windows, but also on some Unix platforms.
6229 To avoid problematic command lines, these definitions are now in an
6230 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
6231 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
6234 *) MIPS III/IV assembler module is reimplemented.
6237 *) More DES library cleanups: remove references to srand/rand and
6238 delete an unused file.
6241 *) Add support for the the free Netwide assembler (NASM) under Win32,
6242 since not many people have MASM (ml) and it can be hard to obtain.
6243 This is currently experimental but it seems to work OK and pass all
6244 the tests. Check out INSTALL.W32 for info.
6247 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
6248 without temporary keys kept an extra copy of the server key,
6249 and connections with temporary keys did not free everything in case
6253 *) New function RSA_check_key and new openssl rsa option -check
6254 for verifying the consistency of RSA keys.
6255 [Ulf Moeller, Bodo Moeller]
6257 *) Various changes to make Win32 compile work:
6258 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
6259 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
6260 comparison" warnings.
6261 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
6264 *) Add a debugging option to PKCS#5 v2 key generation function: when
6265 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
6266 derived keys are printed to stderr.
6269 *) Copy the flags in ASN1_STRING_dup().
6270 [Roman E. Pavlov <pre@mo.msk.ru>]
6272 *) The x509 application mishandled signing requests containing DSA
6273 keys when the signing key was also DSA and the parameters didn't match.
6275 It was supposed to omit the parameters when they matched the signing key:
6276 the verifying software was then supposed to automatically use the CA's
6277 parameters if they were absent from the end user certificate.
6279 Omitting parameters is no longer recommended. The test was also
6280 the wrong way round! This was probably due to unusual behaviour in
6281 EVP_cmp_parameters() which returns 1 if the parameters match.
6282 This meant that parameters were omitted when they *didn't* match and
6283 the certificate was useless. Certificates signed with 'ca' didn't have
6285 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
6287 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
6288 The interface is as follows:
6289 Applications can use
6290 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
6291 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
6292 "off" is now the default.
6293 The library internally uses
6294 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
6295 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
6296 to disable memory-checking temporarily.
6298 Some inconsistent states that previously were possible (and were
6299 even the default) are now avoided.
6301 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
6302 with each memory chunk allocated; this is occasionally more helpful
6303 than just having a counter.
6305 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
6307 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
6311 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
6312 which largely parallels "options", but is for changing API behaviour,
6313 whereas "options" are about protocol behaviour.
6314 Initial "mode" flags are:
6316 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
6317 a single record has been written.
6318 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
6319 retries use the same buffer location.
6320 (But all of the contents must be
6324 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
6327 *) Fix problems with no-hmac etc.
6328 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
6330 *) New functions RSA_get_default_method(), RSA_set_method() and
6331 RSA_get_method(). These allows replacement of RSA_METHODs without having
6332 to mess around with the internals of an RSA structure.
6335 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
6336 Also really enable memory leak checks in openssl.c and in some
6338 [Chad C. Mulligan, Bodo Moeller]
6340 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
6341 up the length of negative integers. This has now been simplified to just
6342 store the length when it is first determined and use it later, rather
6343 than trying to keep track of where data is copied and updating it to
6345 [Steve Henson, reported by Brien Wheeler
6346 <bwheeler@authentica-security.com>]
6348 *) Add a new function PKCS7_signatureVerify. This allows the verification
6349 of a PKCS#7 signature but with the signing certificate passed to the
6350 function itself. This contrasts with PKCS7_dataVerify which assumes the
6351 certificate is present in the PKCS#7 structure. This isn't always the
6352 case: certificates can be omitted from a PKCS#7 structure and be
6353 distributed by "out of band" means (such as a certificate database).
6356 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
6357 function prototypes in pem.h, also change util/mkdef.pl to add the
6358 necessary function names.
6361 *) mk1mf.pl (used by Windows builds) did not properly read the
6362 options set by Configure in the top level Makefile, and Configure
6363 was not even able to write more than one option correctly.
6364 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
6367 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
6368 file to be loaded from a BIO or FILE pointer. The BIO version will
6369 for example allow memory BIOs to contain config info.
6372 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
6373 Whoever hopes to achieve shared-library compatibility across versions
6374 must use this, not the compile-time macro.
6375 (Exercise 0.9.4: Which is the minimum library version required by
6377 Note: All this applies only to multi-threaded programs, others don't
6381 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
6382 through a BIO pair triggered the default case, i.e.
6383 SSLerr(...,SSL_R_UNKNOWN_STATE).
6386 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
6387 can use the SSL library even if none of the specific BIOs is
6391 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
6392 for the encoded length.
6393 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
6395 *) Add initial documentation of the X509V3 functions.
6398 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
6399 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
6400 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
6401 secure PKCS#8 private key format with a high iteration count.
6404 *) Fix determination of Perl interpreter: A perl or perl5
6405 _directory_ in $PATH was also accepted as the interpreter.
6406 [Ralf S. Engelschall]
6408 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
6409 wrong with it but it was very old and did things like calling
6410 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
6414 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
6415 to use the new extension code.
6418 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
6419 with macros. This should make it easier to change their form, add extra
6420 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
6424 *) Add to configuration table a new entry that can specify an alternative
6425 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
6426 according to Mark Crispin <MRC@Panda.COM>.
6430 *) DES CBC did not update the IV. Weird.
6433 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
6434 Changing the behaviour of the former might break existing programs --
6435 where IV updating is needed, des_ncbc_encrypt can be used.
6438 *) When bntest is run from "make test" it drives bc to check its
6439 calculations, as well as internally checking them. If an internal check
6440 fails, it needs to cause bc to give a non-zero result or make test carries
6441 on without noticing the failure. Fixed.
6444 *) DES library cleanups.
6447 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
6448 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
6449 ciphers. NOTE: although the key derivation function has been verified
6450 against some published test vectors it has not been extensively tested
6451 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
6455 *) Instead of "mkdir -p", which is not fully portable, use new
6456 Perl script "util/mkdir-p.pl".
6459 *) Rewrite the way password based encryption (PBE) is handled. It used to
6460 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
6461 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
6462 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
6463 the 'parameter' field of the AlgorithmIdentifier is passed to the
6464 underlying key generation function so it must do its own ASN1 parsing.
6465 This has also changed the EVP_PBE_CipherInit() function which now has a
6466 'parameter' argument instead of literal salt and iteration count values
6467 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
6470 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
6471 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
6472 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
6473 KEY" because this clashed with PKCS#8 unencrypted string. Since this
6474 value was just used as a "magic string" and not used directly its
6475 value doesn't matter.
6478 *) Introduce some semblance of const correctness to BN. Shame C doesn't
6482 *) "linux-sparc64" configuration (ultrapenguin).
6483 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
6484 "linux-sparc" configuration.
6485 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
6487 *) config now generates no-xxx options for missing ciphers.
6490 *) Support the EBCDIC character set (work in progress).
6491 File ebcdic.c not yet included because it has a different license.
6492 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6494 *) Support BS2000/OSD-POSIX.
6495 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6497 *) Make callbacks for key generation use void * instead of char *.
6500 *) Make S/MIME samples compile (not yet tested).
6503 *) Additional typesafe stacks.
6506 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
6510 Changes between 0.9.3 and 0.9.3a [29 May 1999]
6512 *) New configuration variant "sco5-gcc".
6514 *) Updated some demos.
6515 [Sean O Riordain, Wade Scholine]
6517 *) Add missing BIO_free at exit of pkcs12 application.
6520 *) Fix memory leak in conf.c.
6523 *) Updates for Win32 to assembler version of MD5.
6526 *) Set #! path to perl in apps/der_chop to where we found it
6527 instead of using a fixed path.
6530 *) SHA library changes for irix64-mips4-cc.
6533 *) Improvements for VMS support.
6537 Changes between 0.9.2b and 0.9.3 [24 May 1999]
6539 *) Bignum library bug fix. IRIX 6 passes "make test" now!
6540 This also avoids the problems with SC4.2 and unpatched SC5.
6541 [Andy Polyakov <appro@fy.chalmers.se>]
6543 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
6544 These are required because of the typesafe stack would otherwise break
6545 existing code. If old code used a structure member which used to be STACK
6546 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
6547 sk_num or sk_value it would produce an error because the num, data members
6548 are not present in STACK_OF. Now it just produces a warning. sk_set
6549 replaces the old method of assigning a value to sk_value
6550 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
6551 that does this will no longer work (and should use sk_set instead) but
6552 this could be regarded as a "questionable" behaviour anyway.
6555 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
6556 correctly handle encrypted S/MIME data.
6559 *) Change type of various DES function arguments from des_cblock
6560 (which means, in function argument declarations, pointer to char)
6561 to des_cblock * (meaning pointer to array with 8 char elements),
6562 which allows the compiler to do more typechecking; it was like
6563 that back in SSLeay, but with lots of ugly casts.
6565 Introduce new type const_des_cblock.
6568 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
6569 problems: find RecipientInfo structure that matches recipient certificate
6570 and initialise the ASN1 structures properly based on passed cipher.
6573 *) Belatedly make the BN tests actually check the results.
6576 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
6577 to and from BNs: it was completely broken. New compilation option
6578 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
6579 key elements as negative integers.
6582 *) Reorganize and speed up MD5.
6583 [Andy Polyakov <appro@fy.chalmers.se>]
6586 [Richard Levitte <richard@levitte.org>]
6588 *) New option -out to asn1parse to allow the parsed structure to be
6589 output to a file. This is most useful when combined with the -strparse
6590 option to examine the output of things like OCTET STRINGS.
6593 *) Make SSL library a little more fool-proof by not requiring any longer
6594 that SSL_set_{accept,connect}_state be called before
6595 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
6596 in many applications because usually everything *appeared* to work as
6597 intended anyway -- now it really works as intended).
6600 *) Move openssl.cnf out of lib/.
6603 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
6604 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
6605 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
6606 [Ralf S. Engelschall]
6608 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
6609 handle PKCS#7 enveloped data properly.
6610 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
6612 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
6613 copying pointers. The cert_st handling is changed by this in
6614 various ways (and thus what used to be known as ctx->default_cert
6615 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
6616 any longer when s->cert does not give us what we need).
6617 ssl_cert_instantiate becomes obsolete by this change.
6618 As soon as we've got the new code right (possibly it already is?),
6619 we have solved a couple of bugs of the earlier code where s->cert
6620 was used as if it could not have been shared with other SSL structures.
6622 Note that using the SSL API in certain dirty ways now will result
6623 in different behaviour than observed with earlier library versions:
6624 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
6625 does not influence s as it used to.
6627 In order to clean up things more thoroughly, inside SSL_SESSION
6628 we don't use CERT any longer, but a new structure SESS_CERT
6629 that holds per-session data (if available); currently, this is
6630 the peer's certificate chain and, for clients, the server's certificate
6631 and temporary key. CERT holds only those values that can have
6632 meaningful defaults in an SSL_CTX.
6635 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
6636 from the internal representation. Various PKCS#7 fixes: remove some
6637 evil casts and set the enc_dig_alg field properly based on the signing
6641 *) Allow PKCS#12 password to be set from the command line or the
6642 environment. Let 'ca' get its config file name from the environment
6643 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
6647 *) Allow certificate policies extension to use an IA5STRING for the
6648 organization field. This is contrary to the PKIX definition but
6649 VeriSign uses it and IE5 only recognises this form. Document 'x509'
6653 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
6654 without disallowing inline assembler and the like for non-pedantic builds.
6657 *) Support Borland C++ builder.
6658 [Janez Jere <jj@void.si>, modified by Ulf Möller]
6663 *) SHA-1 cleanups and performance enhancements.
6664 [Andy Polyakov <appro@fy.chalmers.se>]
6666 *) Sparc v8plus assembler for the bignum library.
6667 [Andy Polyakov <appro@fy.chalmers.se>]
6669 *) Accept any -xxx and +xxx compiler options in Configure.
6672 *) Update HPUX configuration.
6675 *) Add missing sk_<type>_unshift() function to safestack.h
6676 [Ralf S. Engelschall]
6678 *) New function SSL_CTX_use_certificate_chain_file that sets the
6679 "extra_cert"s in addition to the certificate. (This makes sense
6680 only for "PEM" format files, as chains as a whole are not
6684 *) Support verify_depth from the SSL API.
6685 x509_vfy.c had what can be considered an off-by-one-error:
6686 Its depth (which was not part of the external interface)
6687 was actually counting the number of certificates in a chain;
6688 now it really counts the depth.
6691 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
6692 instead of X509err, which often resulted in confusing error
6693 messages since the error codes are not globally unique
6694 (e.g. an alleged error in ssl3_accept when a certificate
6695 didn't match the private key).
6697 *) New function SSL_CTX_set_session_id_context that allows to set a default
6698 value (so that you don't need SSL_set_session_id_context for each
6699 connection using the SSL_CTX).
6702 *) OAEP decoding bug fix.
6705 *) Support INSTALL_PREFIX for package builders, as proposed by
6709 *) New Configure options "threads" and "no-threads". For systems
6710 where the proper compiler options are known (currently Solaris
6711 and Linux), "threads" is the default.
6714 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
6717 *) Install various scripts to $(OPENSSLDIR)/misc, not to
6718 $(INSTALLTOP)/bin -- they shouldn't clutter directories
6719 such as /usr/local/bin.
6722 *) "make linux-shared" to build shared libraries.
6723 [Niels Poppe <niels@netbox.org>]
6725 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
6728 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
6729 extension adding in x509 utility.
6732 *) Remove NOPROTO sections and error code comments.
6735 *) Partial rewrite of the DEF file generator to now parse the ANSI
6739 *) New Configure options --prefix=DIR and --openssldir=DIR.
6742 *) Complete rewrite of the error code script(s). It is all now handled
6743 by one script at the top level which handles error code gathering,
6744 header rewriting and C source file generation. It should be much better
6745 than the old method: it now uses a modified version of Ulf's parser to
6746 read the ANSI prototypes in all header files (thus the old K&R definitions
6747 aren't needed for error creation any more) and do a better job of
6748 translating function codes into names. The old 'ASN1 error code imbedded
6749 in a comment' is no longer necessary and it doesn't use .err files which
6750 have now been deleted. Also the error code call doesn't have to appear all
6751 on one line (which resulted in some large lines...).
6754 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
6757 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
6758 0 (which usually indicates a closed connection), but continue reading.
6761 *) Fix some race conditions.
6764 *) Add support for CRL distribution points extension. Add Certificate
6765 Policies and CRL distribution points documentation.
6768 *) Move the autogenerated header file parts to crypto/opensslconf.h.
6771 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
6772 8 of keying material. Merlin has also confirmed interop with this fix
6773 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
6774 [Merlin Hughes <merlin@baltimore.ie>]
6776 *) Fix lots of warnings.
6777 [Richard Levitte <levitte@stacken.kth.se>]
6779 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
6780 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
6781 [Richard Levitte <levitte@stacken.kth.se>]
6783 *) Fix problems with sizeof(long) == 8.
6784 [Andy Polyakov <appro@fy.chalmers.se>]
6786 *) Change functions to ANSI C.
6789 *) Fix typos in error codes.
6790 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
6792 *) Remove defunct assembler files from Configure.
6795 *) SPARC v8 assembler BIGNUM implementation.
6796 [Andy Polyakov <appro@fy.chalmers.se>]
6798 *) Support for Certificate Policies extension: both print and set.
6799 Various additions to support the r2i method this uses.
6802 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
6803 return a const string when you are expecting an allocated buffer.
6806 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
6807 types DirectoryString and DisplayText.
6810 *) Add code to allow r2i extensions to access the configuration database,
6811 add an LHASH database driver and add several ctx helper functions.
6814 *) Fix an evil bug in bn_expand2() which caused various BN functions to
6815 fail when they extended the size of a BIGNUM.
6818 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
6819 support typesafe stack.
6822 *) Fix typo in SSL_[gs]et_options().
6823 [Nils Frostberg <nils@medcom.se>]
6825 *) Delete various functions and files that belonged to the (now obsolete)
6826 old X509V3 handling code.
6829 *) New Configure option "rsaref".
6832 *) Don't auto-generate pem.h.
6835 *) Introduce type-safe ASN.1 SETs.
6838 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
6839 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
6841 *) Introduce type-safe STACKs. This will almost certainly break lots of code
6842 that links with OpenSSL (well at least cause lots of warnings), but fear
6843 not: the conversion is trivial, and it eliminates loads of evil casts. A
6844 few STACKed things have been converted already. Feel free to convert more.
6845 In the fullness of time, I'll do away with the STACK type altogether.
6848 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
6849 specified in <certfile> by updating the entry in the index.txt file.
6850 This way one no longer has to edit the index.txt file manually for
6851 revoking a certificate. The -revoke option does the gory details now.
6852 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
6854 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
6855 `-text' option at all and this way the `-noout -text' combination was
6856 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
6857 [Ralf S. Engelschall]
6859 *) Make sure a corresponding plain text error message exists for the
6860 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
6861 verify callback function determined that a certificate was revoked.
6862 [Ralf S. Engelschall]
6864 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
6865 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
6866 all available cipers including rc5, which was forgotten until now.
6867 In order to let the testing shell script know which algorithms
6868 are available, a new (up to now undocumented) command
6869 "openssl list-cipher-commands" is used.
6872 *) Bugfix: s_client occasionally would sleep in select() when
6873 it should have checked SSL_pending() first.
6876 *) New functions DSA_do_sign and DSA_do_verify to provide access to
6877 the raw DSA values prior to ASN.1 encoding.
6880 *) Tweaks to Configure
6881 [Niels Poppe <niels@netbox.org>]
6883 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
6887 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
6890 *) New config option to avoid instructions that are illegal on the 80386.
6891 The default code is faster, but requires at least a 486.
6894 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
6895 SSL2_SERVER_VERSION (not used at all) macros, which are now the
6896 same as SSL2_VERSION anyway.
6899 *) New "-showcerts" option for s_client.
6902 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
6903 application. Various cleanups and fixes.
6906 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
6907 modify error routines to work internally. Add error codes and PBE init
6908 to library startup routines.
6911 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
6912 packing functions to asn1 and evp. Changed function names and error
6913 codes along the way.
6916 *) PKCS12 integration: and so it begins... First of several patches to
6917 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
6918 objects to objects.h
6921 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
6922 and display support for Thawte strong extranet extension.
6925 *) Add LinuxPPC support.
6926 [Jeff Dubrule <igor@pobox.org>]
6928 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
6929 bn_div_words in alpha.s.
6930 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
6932 *) Make sure the RSA OAEP test is skipped under -DRSAref because
6933 OAEP isn't supported when OpenSSL is built with RSAref.
6934 [Ulf Moeller <ulf@fitug.de>]
6936 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
6937 so they no longer are missing under -DNOPROTO.
6938 [Soren S. Jorvang <soren@t.dk>]
6941 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
6943 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
6944 doesn't work when the session is reused. Coming soon!
6947 *) Fix a security hole, that allows sessions to be reused in the wrong
6948 context thus bypassing client cert protection! All software that uses
6949 client certs and session caches in multiple contexts NEEDS PATCHING to
6950 allow session reuse! A fuller solution is in the works.
6951 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
6953 *) Some more source tree cleanups (removed obsolete files
6954 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
6955 permission on "config" script to be executable) and a fix for the INSTALL
6957 [Ulf Moeller <ulf@fitug.de>]
6959 *) Remove some legacy and erroneous uses of malloc, free instead of
6961 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
6963 *) Make rsa_oaep_test return non-zero on error.
6964 [Ulf Moeller <ulf@fitug.de>]
6966 *) Add support for native Solaris shared libraries. Configure
6967 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
6968 if someone would make that last step automatic.
6969 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
6971 *) ctx_size was not built with the right compiler during "make links". Fixed.
6974 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
6975 except NULL ciphers". This means the default cipher list will no longer
6976 enable NULL ciphers. They need to be specifically enabled e.g. with
6977 the string "DEFAULT:eNULL".
6980 *) Fix to RSA private encryption routines: if p < q then it would
6981 occasionally produce an invalid result. This will only happen with
6982 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
6985 *) Be less restrictive and allow also `perl util/perlpath.pl
6986 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
6987 because this way one can also use an interpreter named `perl5' (which is
6988 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
6989 installed as `perl').
6990 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6992 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
6993 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
6995 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
6996 advapi32.lib to Win32 build and change the pem test comparision
6997 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
6998 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
6999 and crypto/des/ede_cbcm_enc.c.
7002 *) DES quad checksum was broken on big-endian architectures. Fixed.
7005 *) Comment out two functions in bio.h that aren't implemented. Fix up the
7006 Win32 test batch file so it (might) work again. The Win32 test batch file
7007 is horrible: I feel ill....
7010 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
7011 in e_os.h. Audit of header files to check ANSI and non ANSI
7012 sections: 10 functions were absent from non ANSI section and not exported
7013 from Windows DLLs. Fixed up libeay.num for new functions.
7016 *) Make `openssl version' output lines consistent.
7017 [Ralf S. Engelschall]
7019 *) Fix Win32 symbol export lists for BIO functions: Added
7020 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
7021 to ms/libeay{16,32}.def.
7022 [Ralf S. Engelschall]
7024 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
7025 fine under Unix and passes some trivial tests I've now added. But the
7026 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
7027 added to make sure no one expects that this stuff really works in the
7028 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
7029 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
7031 [Ralf S. Engelschall]
7033 *) Fix the generation of two part addresses in perl.
7034 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
7036 *) Add config entry for Linux on MIPS.
7037 [John Tobey <jtobey@channel1.com>]
7039 *) Make links whenever Configure is run, unless we are on Windoze.
7042 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
7043 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
7047 *) Add a useful kludge to allow package maintainers to specify compiler and
7048 other platforms details on the command line without having to patch the
7049 Configure script everytime: One now can use ``perl Configure
7050 <id>:<details>'', i.e. platform ids are allowed to have details appended
7051 to them (seperated by colons). This is treated as there would be a static
7052 pre-configured entry in Configure's %table under key <id> with value
7053 <details> and ``perl Configure <id>'' is called. So, when you want to
7054 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
7055 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
7056 now, which overrides the FreeBSD-elf entry on-the-fly.
7057 [Ralf S. Engelschall]
7059 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
7062 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
7063 on the `perl Configure ...' command line. This way one can compile
7064 OpenSSL libraries with Position Independent Code (PIC) which is needed
7065 for linking it into DSOs.
7066 [Ralf S. Engelschall]
7068 *) Remarkably, export ciphers were totally broken and no-one had noticed!
7072 *) Cleaned up the LICENSE document: The official contact for any license
7073 questions now is the OpenSSL core team under openssl-core@openssl.org.
7074 And add a paragraph about the dual-license situation to make sure people
7075 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
7076 to the OpenSSL toolkit.
7077 [Ralf S. Engelschall]
7079 *) General source tree makefile cleanups: Made `making xxx in yyy...'
7080 display consistent in the source tree and replaced `/bin/rm' by `rm'.
7081 Additonally cleaned up the `make links' target: Remove unnecessary
7082 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
7083 to speed processing and no longer clutter the display with confusing
7084 stuff. Instead only the actually done links are displayed.
7085 [Ralf S. Engelschall]
7087 *) Permit null encryption ciphersuites, used for authentication only. It used
7088 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
7089 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
7093 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
7094 signed attributes when verifying signatures (this would break them),
7095 the detached data encoding was wrong and public keys obtained using
7096 X509_get_pubkey() weren't freed.
7099 *) Add text documentation for the BUFFER functions. Also added a work around
7100 to a Win95 console bug. This was triggered by the password read stuff: the
7101 last character typed gets carried over to the next fread(). If you were
7102 generating a new cert request using 'req' for example then the last
7103 character of the passphrase would be CR which would then enter the first
7107 *) Added the new `Includes OpenSSL Cryptography Software' button as
7108 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
7109 button and can be used by applications based on OpenSSL to show the
7110 relationship to the OpenSSL project.
7111 [Ralf S. Engelschall]
7113 *) Remove confusing variables in function signatures in files
7114 ssl/ssl_lib.c and ssl/ssl.h.
7115 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7117 *) Don't install bss_file.c under PREFIX/include/
7118 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7120 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
7121 functions that return function pointers and has support for NT specific
7122 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
7123 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
7124 unsigned to signed types: this was killing the Win32 compile.
7127 *) Add new certificate file to stack functions,
7128 SSL_add_dir_cert_subjects_to_stack() and
7129 SSL_add_file_cert_subjects_to_stack(). These largely supplant
7130 SSL_load_client_CA_file(), and can be used to add multiple certs easily
7131 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
7132 This means that Apache-SSL and similar packages don't have to mess around
7133 to add as many CAs as they want to the preferred list.
7136 *) Experiment with doxygen documentation. Currently only partially applied to
7138 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
7139 openssl.doxy as the configuration file.
7142 *) Get rid of remaining C++-style comments which strict C compilers hate.
7143 [Ralf S. Engelschall, pointed out by Carlos Amengual]
7145 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
7146 compiled in by default: it has problems with large keys.
7149 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
7150 DH private keys and/or callback functions which directly correspond to
7151 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
7152 is needed for applications which have to configure certificates on a
7153 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
7155 For the RSA certificate situation is makes no difference, but
7156 for the DSA certificate situation this fixes the "no shared cipher"
7157 problem where the OpenSSL cipher selection procedure failed because the
7158 temporary keys were not overtaken from the context and the API provided
7159 no way to reconfigure them.
7160 The new functions now let applications reconfigure the stuff and they
7161 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
7162 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
7163 non-public-API function ssl_cert_instantiate() is used as a helper
7164 function and also to reduce code redundancy inside ssl_rsa.c.
7165 [Ralf S. Engelschall]
7167 *) Move s_server -dcert and -dkey options out of the undocumented feature
7168 area because they are useful for the DSA situation and should be
7169 recognized by the users.
7170 [Ralf S. Engelschall]
7172 *) Fix the cipher decision scheme for export ciphers: the export bits are
7173 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
7174 SSL_EXP_MASK. So, the original variable has to be used instead of the
7175 already masked variable.
7176 [Richard Levitte <levitte@stacken.kth.se>]
7178 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
7179 [Richard Levitte <levitte@stacken.kth.se>]
7181 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
7182 from `int' to `unsigned int' because it's a length and initialized by
7183 EVP_DigestFinal() which expects an `unsigned int *'.
7184 [Richard Levitte <levitte@stacken.kth.se>]
7186 *) Don't hard-code path to Perl interpreter on shebang line of Configure
7187 script. Instead use the usual Shell->Perl transition trick.
7188 [Ralf S. Engelschall]
7190 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
7191 (in addition to RSA certificates) to match the behaviour of `openssl dsa
7192 -noout -modulus' as it's already the case for `openssl rsa -noout
7193 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
7194 currently the public key is printed (a decision which was already done by
7195 `openssl dsa -modulus' in the past) which serves a similar purpose.
7196 Additionally the NO_RSA no longer completely removes the whole -modulus
7197 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
7199 [Ralf S. Engelschall]
7201 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
7202 BIO. See the source (crypto/evp/bio_ok.c) for more info.
7203 [Arne Ansper <arne@ats.cyber.ee>]
7205 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
7206 to be added. Now both 'req' and 'ca' can use new objects defined in the
7210 *) Add cool BIO that does syslog (or event log on NT).
7211 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
7213 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
7214 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
7215 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
7216 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
7219 *) Add preliminary config info for new extension code.
7222 *) Make RSA_NO_PADDING really use no padding.
7223 [Ulf Moeller <ulf@fitug.de>]
7225 *) Generate errors when private/public key check is done.
7228 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
7229 for some CRL extensions and new objects added.
7232 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
7233 key usage extension and fuller support for authority key id.
7236 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
7237 padding method for RSA, which is recommended for new applications in PKCS
7238 #1 v2.0 (RFC 2437, October 1998).
7239 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
7240 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
7241 against Bleichbacher's attack on RSA.
7242 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
7245 *) Updates to the new SSL compression code
7246 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7248 *) Fix so that the version number in the master secret, when passed
7249 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
7250 (because the server will not accept higher), that the version number
7251 is 0x03,0x01, not 0x03,0x00
7252 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7254 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
7255 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
7256 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
7259 *) Support for RAW extensions where an arbitrary extension can be
7260 created by including its DER encoding. See apps/openssl.cnf for
7264 *) Make sure latest Perl versions don't interpret some generated C array
7265 code as Perl array code in the crypto/err/err_genc.pl script.
7266 [Lars Weber <3weber@informatik.uni-hamburg.de>]
7268 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
7269 not many people have the assembler. Various Win32 compilation fixes and
7270 update to the INSTALL.W32 file with (hopefully) more accurate Win32
7274 *) Modify configure script 'Configure' to automatically create crypto/date.h
7275 file under Win32 and also build pem.h from pem.org. New script
7276 util/mkfiles.pl to create the MINFO file on environments that can't do a
7277 'make files': perl util/mkfiles.pl >MINFO should work.
7280 *) Major rework of DES function declarations, in the pursuit of correctness
7281 and purity. As a result, many evil casts evaporated, and some weirdness,
7282 too. You may find this causes warnings in your code. Zapping your evil
7283 casts will probably fix them. Mostly.
7286 *) Fix for a typo in asn1.h. Bug fix to object creation script
7287 obj_dat.pl. It considered a zero in an object definition to mean
7288 "end of object": none of the objects in objects.h have any zeros
7289 so it wasn't spotted.
7290 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
7292 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
7293 Masking (CBCM). In the absence of test vectors, the best I have been able
7294 to do is check that the decrypt undoes the encrypt, so far. Send me test
7295 vectors if you have them.
7298 *) Correct calculation of key length for export ciphers (too much space was
7299 allocated for null ciphers). This has not been tested!
7302 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
7303 message is now correct (it understands "crypto" and "ssl" on its
7304 command line). There is also now an "update" option. This will update
7305 the util/ssleay.num and util/libeay.num files with any new functions.
7307 perl util/mkdef.pl crypto ssl update
7308 it will update them.
7311 *) Overhauled the Perl interface (perl/*):
7312 - ported BN stuff to OpenSSL's different BN library
7313 - made the perl/ source tree CVS-aware
7314 - renamed the package from SSLeay to OpenSSL (the files still contain
7315 their history because I've copied them in the repository)
7316 - removed obsolete files (the test scripts will be replaced
7317 by better Test::Harness variants in the future)
7318 [Ralf S. Engelschall]
7320 *) First cut for a very conservative source tree cleanup:
7321 1. merge various obsolete readme texts into doc/ssleay.txt
7322 where we collect the old documents and readme texts.
7323 2. remove the first part of files where I'm already sure that we no
7324 longer need them because of three reasons: either they are just temporary
7325 files which were left by Eric or they are preserved original files where
7326 I've verified that the diff is also available in the CVS via "cvs diff
7327 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
7328 the crypto/md/ stuff).
7329 [Ralf S. Engelschall]
7331 *) More extension code. Incomplete support for subject and issuer alt
7332 name, issuer and authority key id. Change the i2v function parameters
7333 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
7334 what that's for :-) Fix to ASN1 macro which messed up
7335 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
7338 *) Preliminary support for ENUMERATED type. This is largely copied from the
7342 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
7343 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7345 *) Make sure `make rehash' target really finds the `openssl' program.
7346 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7348 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
7349 like to hear about it if this slows down other processors.
7352 *) Add CygWin32 platform information to Configure script.
7353 [Alan Batie <batie@aahz.jf.intel.com>]
7355 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
7356 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
7358 *) New program nseq to manipulate netscape certificate sequences
7361 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
7365 *) Fixes to BN code. Previously the default was to define BN_RECURSION
7366 but the BN code had some problems that would cause failures when
7367 doing certificate verification and some other functions.
7368 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7370 *) Add ASN1 and PEM code to support netscape certificate sequences.
7373 *) Add ASN1 and PEM code to support netscape certificate sequences.
7376 *) Add several PKIX and private extended key usage OIDs.
7379 *) Modify the 'ca' program to handle the new extension code. Modify
7380 openssl.cnf for new extension format, add comments.
7383 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
7384 and add a sample to openssl.cnf so req -x509 now adds appropriate
7388 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
7389 error code, add initial support to X509_print() and x509 application.
7392 *) Takes a deep breath and start addding X509 V3 extension support code. Add
7393 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
7394 stuff is currently isolated and isn't even compiled yet.
7397 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
7398 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
7399 Removed the versions check from X509 routines when loading extensions:
7400 this allows certain broken certificates that don't set the version
7401 properly to be processed.
7404 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
7405 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
7406 can still be regenerated with "make depend".
7409 *) Spelling mistake in C version of CAST-128.
7410 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
7412 *) Changes to the error generation code. The perl script err-code.pl
7413 now reads in the old error codes and retains the old numbers, only
7414 adding new ones if necessary. It also only changes the .err files if new
7415 codes are added. The makefiles have been modified to only insert errors
7416 when needed (to avoid needlessly modifying header files). This is done
7417 by only inserting errors if the .err file is newer than the auto generated
7418 C file. To rebuild all the error codes from scratch (the old behaviour)
7419 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
7420 or delete all the .err files.
7423 *) CAST-128 was incorrectly implemented for short keys. The C version has
7424 been fixed, but is untested. The assembler versions are also fixed, but
7425 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
7426 to regenerate it if needed.
7427 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
7428 Hagino <itojun@kame.net>]
7430 *) File was opened incorrectly in randfile.c.
7431 [Ulf Möller <ulf@fitug.de>]
7433 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
7434 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
7435 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
7436 al: it's just almost always a UTCTime. Note this patch adds new error
7437 codes so do a "make errors" if there are problems.
7440 *) Correct Linux 1 recognition in config.
7441 [Ulf Möller <ulf@fitug.de>]
7443 *) Remove pointless MD5 hash when using DSA keys in ca.
7444 [Anonymous <nobody@replay.com>]
7446 *) Generate an error if given an empty string as a cert directory. Also
7447 generate an error if handed NULL (previously returned 0 to indicate an
7448 error, but didn't set one).
7449 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
7451 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
7454 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
7455 parameters. This was causing a warning which killed off the Win32 compile.
7458 *) Remove C++ style comments from crypto/bn/bn_local.h.
7459 [Neil Costigan <neil.costigan@celocom.com>]
7461 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
7462 based on a text string, looking up short and long names and finally
7463 "dot" format. The "dot" format stuff didn't work. Added new function
7464 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
7465 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
7466 OID is not part of the table.
7469 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
7470 X509_LOOKUP_by_alias().
7473 *) Sort openssl functions by name.
7476 *) Get the gendsa program working (hopefully) and add it to app list. Remove
7477 encryption from sample DSA keys (in case anyone is interested the password
7481 *) Make _all_ *_free functions accept a NULL pointer.
7482 [Frans Heymans <fheymans@isaserver.be>]
7484 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
7486 [Anonymous <nobody@replay.com>]
7488 *) s_server should send the CAfile as acceptable CAs, not its own cert.
7489 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7491 *) Don't blow it for numeric -newkey arguments to apps/req.
7492 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7494 *) Temp key "for export" tests were wrong in s3_srvr.c.
7495 [Anonymous <nobody@replay.com>]
7497 *) Add prototype for temp key callback functions
7498 SSL_CTX_set_tmp_{rsa,dh}_callback().
7501 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
7502 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
7505 *) X509_name_add_entry() freed the wrong thing after an error.
7506 [Arne Ansper <arne@ats.cyber.ee>]
7508 *) rsa_eay.c would attempt to free a NULL context.
7509 [Arne Ansper <arne@ats.cyber.ee>]
7511 *) BIO_s_socket() had a broken should_retry() on Windoze.
7512 [Arne Ansper <arne@ats.cyber.ee>]
7514 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
7515 [Arne Ansper <arne@ats.cyber.ee>]
7517 *) Make sure the already existing X509_STORE->depth variable is initialized
7518 in X509_STORE_new(), but document the fact that this variable is still
7519 unused in the certificate verification process.
7520 [Ralf S. Engelschall]
7522 *) Fix the various library and apps files to free up pkeys obtained from
7523 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
7526 *) Fix reference counting in X509_PUBKEY_get(). This makes
7527 demos/maurice/example2.c work, amongst others, probably.
7528 [Steve Henson and Ben Laurie]
7530 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
7531 `openssl' and second, the shortcut symlinks for the `openssl <command>'
7532 are no longer created. This way we have a single and consistent command
7533 line interface `openssl <command>', similar to `cvs <command>'.
7534 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
7536 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
7537 BIT STRING wrapper always have zero unused bits.
7540 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
7543 *) Make the top-level INSTALL documentation easier to understand.
7546 *) Makefiles updated to exit if an error occurs in a sub-directory
7547 make (including if user presses ^C) [Paul Sutton]
7549 *) Make Montgomery context stuff explicit in RSA data structure.
7552 *) Fix build order of pem and err to allow for generated pem.h.
7555 *) Fix renumbering bug in X509_NAME_delete_entry().
7558 *) Enhanced the err-ins.pl script so it makes the error library number
7559 global and can add a library name. This is needed for external ASN1 and
7560 other error libraries.
7563 *) Fixed sk_insert which never worked properly.
7566 *) Fix ASN1 macros so they can handle indefinite length construted
7567 EXPLICIT tags. Some non standard certificates use these: they can now
7571 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
7572 into a single doc/ssleay.txt bundle. This way the information is still
7573 preserved but no longer messes up this directory. Now it's new room for
7574 the new set of documenation files.
7575 [Ralf S. Engelschall]
7577 *) SETs were incorrectly DER encoded. This was a major pain, because they
7578 shared code with SEQUENCEs, which aren't coded the same. This means that
7579 almost everything to do with SETs or SEQUENCEs has either changed name or
7580 number of arguments.
7581 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
7583 *) Fix test data to work with the above.
7586 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
7587 was already fixed by Eric for 0.9.1 it seems.
7588 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
7590 *) Autodetect FreeBSD3.
7593 *) Fix various bugs in Configure. This affects the following platforms:
7597 unixware-2.0-pentium
7601 *) Eliminate generated files from CVS. Reorder tests to regenerate files
7602 before they are needed.
7605 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
7609 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
7611 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
7612 changed SSLeay to OpenSSL in version strings.
7613 [Ralf S. Engelschall]
7615 *) Some fixups to the top-level documents.
7618 *) Fixed the nasty bug where rsaref.h was not found under compile-time
7619 because the symlink to include/ was missing.
7620 [Ralf S. Engelschall]
7622 *) Incorporated the popular no-RSA/DSA-only patches
7623 which allow to compile a RSA-free SSLeay.
7624 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
7626 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
7627 when "ssleay" is still not found.
7628 [Ralf S. Engelschall]
7630 *) Added more platforms to Configure: Cray T3E, HPUX 11,
7631 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
7633 *) Updated the README file.
7634 [Ralf S. Engelschall]
7636 *) Added various .cvsignore files in the CVS repository subdirs
7637 to make a "cvs update" really silent.
7638 [Ralf S. Engelschall]
7640 *) Recompiled the error-definition header files and added
7641 missing symbols to the Win32 linker tables.
7642 [Ralf S. Engelschall]
7644 *) Cleaned up the top-level documents;
7645 o new files: CHANGES and LICENSE
7646 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
7647 o merged COPYRIGHT into LICENSE
7648 o removed obsolete TODO file
7649 o renamed MICROSOFT to INSTALL.W32
7650 [Ralf S. Engelschall]
7652 *) Removed dummy files from the 0.9.1b source tree:
7653 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
7654 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
7655 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
7656 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
7657 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
7658 [Ralf S. Engelschall]
7660 *) Added various platform portability fixes.
7663 *) The Genesis of the OpenSSL rpject:
7664 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
7665 Young and Tim J. Hudson created while they were working for C2Net until
7667 [The OpenSSL Project]
7670 Changes between 0.9.0b and 0.9.1b [not released]
7672 *) Updated a few CA certificates under certs/
7675 *) Changed some BIGNUM api stuff.
7678 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
7679 DGUX x86, Linux Alpha, etc.
7682 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
7683 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
7687 *) Add -strparse option to asn1pars program which parses nested
7689 [Dr Stephen Henson <shenson@bigfoot.com>]
7691 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
7694 *) DSA fix for "ca" program.
7697 *) Added "-genkey" option to "dsaparam" program.
7700 *) Added RIPE MD160 (rmd160) message digest.
7703 *) Added -a (all) option to "ssleay version" command.
7706 *) Added PLATFORM define which is the id given to Configure.
7709 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
7712 *) Extended the ASN.1 parser routines.
7715 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
7718 *) Added a BN_CTX to the BN library.
7721 *) Fixed the weak key values in DES library
7724 *) Changed API in EVP library for cipher aliases.
7727 *) Added support for RC2/64bit cipher.
7730 *) Converted the lhash library to the crypto/mem.c functions.
7733 *) Added more recognized ASN.1 object ids.
7736 *) Added more RSA padding checks for SSL/TLS.
7739 *) Added BIO proxy/filter functionality.
7742 *) Added extra_certs to SSL_CTX which can be used
7743 send extra CA certificates to the client in the CA cert chain sending
7744 process. It can be configured with SSL_CTX_add_extra_chain_cert().
7747 *) Now Fortezza is denied in the authentication phase because
7748 this is key exchange mechanism is not supported by SSLeay at all.
7751 *) Additional PKCS1 checks.
7754 *) Support the string "TLSv1" for all TLS v1 ciphers.
7757 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
7758 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
7761 *) Fixed a few memory leaks.
7764 *) Fixed various code and comment typos.
7767 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
7768 bytes sent in the client random.
7769 [Edward Bishop <ebishop@spyglass.com>]