5 Changes between 1.1.0b and 1.1.0c [xx XXX xxxx]
9 *) Removed automatic addition of RPATH in shared libraries and executables,
10 as this was a remainder from OpenSSL 1.0.x and isn't needed any more.
13 Changes between 1.1.0a and 1.1.0b [26 Sep 2016]
15 *) Fix Use After Free for large message sizes
17 The patch applied to address CVE-2016-6307 resulted in an issue where if a
18 message larger than approx 16k is received then the underlying buffer to
19 store the incoming message is reallocated and moved. Unfortunately a
20 dangling pointer to the old location is left which results in an attempt to
21 write to the previously freed location. This is likely to result in a
22 crash, however it could potentially lead to execution of arbitrary code.
24 This issue only affects OpenSSL 1.1.0a.
26 This issue was reported to OpenSSL by Robert Święcki.
30 Changes between 1.1.0 and 1.1.0a [22 Sep 2016]
32 *) OCSP Status Request extension unbounded memory growth
34 A malicious client can send an excessively large OCSP Status Request
35 extension. If that client continually requests renegotiation, sending a
36 large OCSP Status Request extension each time, then there will be unbounded
37 memory growth on the server. This will eventually lead to a Denial Of
38 Service attack through memory exhaustion. Servers with a default
39 configuration are vulnerable even if they do not support OCSP. Builds using
40 the "no-ocsp" build time option are not affected.
42 This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
46 *) SSL_peek() hang on empty record
48 OpenSSL 1.1.0 SSL/TLS will hang during a call to SSL_peek() if the peer
49 sends an empty record. This could be exploited by a malicious peer in a
50 Denial Of Service attack.
52 This issue was reported to OpenSSL by Alex Gaynor.
56 *) Excessive allocation of memory in tls_get_message_header() and
57 dtls1_preprocess_fragment()
59 A (D)TLS message includes 3 bytes for its length in the header for the
60 message. This would allow for messages up to 16Mb in length. Messages of
61 this length are excessive and OpenSSL includes a check to ensure that a
62 peer is sending reasonably sized messages in order to avoid too much memory
63 being consumed to service a connection. A flaw in the logic of version
64 1.1.0 means that memory for the message is allocated too early, prior to
65 the excessive message length check. Due to way memory is allocated in
66 OpenSSL this could mean an attacker could force up to 21Mb to be allocated
67 to service a connection. This could lead to a Denial of Service through
68 memory exhaustion. However, the excessive message length check still takes
69 place, and this would cause the connection to immediately fail. Assuming
70 that the application calls SSL_free() on the failed conneciton in a timely
71 manner then the 21Mb of allocated memory will then be immediately freed
72 again. Therefore the excessive memory allocation will be transitory in
73 nature. This then means that there is only a security impact if:
75 1) The application does not call SSL_free() in a timely manner in the event
76 that the connection fails
78 2) The application is working in a constrained environment where there is
79 very little free memory
81 3) The attacker initiates multiple connection attempts such that there are
82 multiple connections in a state where memory has been allocated for the
83 connection; SSL_free() has not yet been called; and there is insufficient
84 memory to service the multiple requests.
86 Except in the instance of (1) above any Denial Of Service is likely to be
87 transitory because as soon as the connection fails the memory is
88 subsequently freed again in the SSL_free() call. However there is an
89 increased risk during this period of application crashes due to the lack of
90 memory - which would then mean a more serious Denial of Service.
92 This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
93 (CVE-2016-6307 and CVE-2016-6308)
96 *) solaris-x86-cc, i.e. 32-bit configuration with vendor compiler,
97 had to be removed. Primary reason is that vendor assembler can't
98 assemble our modules with -KPIC flag. As result it, assembly
99 support, was not even available as option. But its lack means
100 lack of side-channel resistant code, which is incompatible with
101 security by todays standards. Fortunately gcc is readily available
102 prepackaged option, which we firmly point at...
105 Changes between 1.0.2h and 1.1.0 [25 Aug 2016]
107 *) Windows command-line tool supports UTF-8 opt-in option for arguments
108 and console input. Setting OPENSSL_WIN32_UTF8 environment variable
109 (to any value) allows Windows user to access PKCS#12 file generated
110 with Windows CryptoAPI and protected with non-ASCII password, as well
111 as files generated under UTF-8 locale on Linux also protected with
115 *) To mitigate the SWEET32 attack (CVE-2016-2183), 3DES cipher suites
116 have been disabled by default and removed from DEFAULT, just like RC4.
117 See the RC4 item below to re-enable both.
120 *) The method for finding the storage location for the Windows RAND seed file
121 has changed. First we check %RANDFILE%. If that is not set then we check
122 the directories %HOME%, %USERPROFILE% and %SYSTEMROOT% in that order. If
123 all else fails we fall back to C:\.
126 *) The EVP_EncryptUpdate() function has had its return type changed from void
127 to int. A return of 0 indicates and error while a return of 1 indicates
131 *) The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
132 DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
133 off the constant time implementation for RSA, DSA and DH have been made
134 no-ops and deprecated.
137 *) Windows RAND implementation was simplified to only get entropy by
138 calling CryptGenRandom(). Various other RAND-related tickets
140 [Joseph Wylie Yandle, Rich Salz]
142 *) The stack and lhash API's were renamed to start with OPENSSL_SK_
143 and OPENSSL_LH_, respectively. The old names are available
144 with API compatibility. They new names are now completely documented.
147 *) Unify TYPE_up_ref(obj) methods signature.
148 SSL_CTX_up_ref(), SSL_up_ref(), X509_up_ref(), EVP_PKEY_up_ref(),
149 X509_CRL_up_ref(), X509_OBJECT_up_ref_count() methods are now returning an
150 int (instead of void) like all others TYPE_up_ref() methods.
151 So now these methods also check the return value of CRYPTO_atomic_add(),
152 and the validity of object reference counter.
153 [fdasilvayy@gmail.com]
155 *) With Windows Visual Studio builds, the .pdb files are installed
156 alongside the installed libraries and executables. For a static
157 library installation, ossl_static.pdb is the associate compiler
158 generated .pdb file to be used when linking programs.
161 *) Remove openssl.spec. Packaging files belong with the packagers.
164 *) Automatic Darwin/OSX configuration has had a refresh, it will now
165 recognise x86_64 architectures automatically. You can still decide
166 to build for a different bitness with the environment variable
167 KERNEL_BITS (can be 32 or 64), for example:
169 KERNEL_BITS=32 ./config
173 *) Change default algorithms in pkcs8 utility to use PKCS#5 v2.0,
174 256 bit AES and HMAC with SHA256.
177 *) Remove support for MIPS o32 ABI on IRIX (and IRIX only).
180 *) Triple-DES ciphers have been moved from HIGH to MEDIUM.
183 *) To enable users to have their own config files and build file templates,
184 Configure looks in the directory indicated by the environment variable
185 OPENSSL_LOCAL_CONFIG_DIR as well as the in-source Configurations/
186 directory. On VMS, OPENSSL_LOCAL_CONFIG_DIR is expected to be a logical
187 name and is used as is.
190 *) The following datatypes were made opaque: X509_OBJECT, X509_STORE_CTX,
191 X509_STORE, X509_LOOKUP, and X509_LOOKUP_METHOD. The unused type
192 X509_CERT_FILE_CTX was removed.
195 *) "shared" builds are now the default. To create only static libraries use
196 the "no-shared" Configure option.
199 *) Remove the no-aes, no-hmac, no-rsa, no-sha and no-md5 Configure options.
200 All of these option have not worked for some while and are fundamental
204 *) Make various cleanup routines no-ops and mark them as deprecated. Most
205 global cleanup functions are no longer required because they are handled
206 via auto-deinit (see OPENSSL_init_crypto and OPENSSL_init_ssl man pages).
207 Explicitly de-initing can cause problems (e.g. where a library that uses
208 OpenSSL de-inits, but an application is still using it). The affected
209 functions are CONF_modules_free(), ENGINE_cleanup(), OBJ_cleanup(),
210 EVP_cleanup(), BIO_sock_cleanup(), CRYPTO_cleanup_all_ex_data(),
211 RAND_cleanup(), SSL_COMP_free_compression_methods(), ERR_free_strings() and
215 *) --strict-warnings no longer enables runtime debugging options
216 such as REF_DEBUG. Instead, debug options are automatically
217 enabled with '--debug' builds.
218 [Andy Polyakov, Emilia Käsper]
220 *) Made DH and DH_METHOD opaque. The structures for managing DH objects
221 have been moved out of the public header files. New functions for managing
222 these have been added.
225 *) Made RSA and RSA_METHOD opaque. The structures for managing RSA
226 objects have been moved out of the public header files. New
227 functions for managing these have been added.
230 *) Made DSA and DSA_METHOD opaque. The structures for managing DSA objects
231 have been moved out of the public header files. New functions for managing
232 these have been added.
235 *) Made BIO and BIO_METHOD opaque. The structures for managing BIOs have been
236 moved out of the public header files. New functions for managing these
240 *) Removed no-rijndael as a config option. Rijndael is an old name for AES.
243 *) Removed the mk1mf build scripts.
246 *) Headers are now wrapped, if necessary, with OPENSSL_NO_xxx, so
247 it is always safe to #include a header now.
250 *) Removed the aged BC-32 config and all its supporting scripts
253 *) Removed support for Ultrix, Netware, and OS/2.
256 *) Add support for HKDF.
259 *) Add support for blake2b and blake2s
262 *) Added support for "pipelining". Ciphers that have the
263 EVP_CIPH_FLAG_PIPELINE flag set have a capability to process multiple
264 encryptions/decryptions simultaneously. There are currently no built-in
265 ciphers with this property but the expectation is that engines will be able
266 to offer it to significantly improve throughput. Support has been extended
267 into libssl so that multiple records for a single connection can be
268 processed in one go (for >=TLS 1.1).
271 *) Added the AFALG engine. This is an async capable engine which is able to
272 offload work to the Linux kernel. In this initial version it only supports
273 AES128-CBC. The kernel must be version 4.1.0 or greater.
276 *) OpenSSL now uses a new threading API. It is no longer necessary to
277 set locking callbacks to use OpenSSL in a multi-threaded environment. There
278 are two supported threading models: pthreads and windows threads. It is
279 also possible to configure OpenSSL at compile time for "no-threads". The
280 old threading API should no longer be used. The functions have been
281 replaced with "no-op" compatibility macros.
282 [Alessandro Ghedini, Matt Caswell]
284 *) Modify behavior of ALPN to invoke callback after SNI/servername
285 callback, such that updates to the SSL_CTX affect ALPN.
288 *) Add SSL_CIPHER queries for authentication and key-exchange.
291 *) Changes to the DEFAULT cipherlist:
292 - Prefer (EC)DHE handshakes over plain RSA.
293 - Prefer AEAD ciphers over legacy ciphers.
294 - Prefer ECDSA over RSA when both certificates are available.
295 - Prefer TLSv1.2 ciphers/PRF.
296 - Remove DSS, SEED, IDEA, CAMELLIA, and AES-CCM from the
300 *) Change the ECC default curve list to be this, in order: x25519,
301 secp256r1, secp521r1, secp384r1.
304 *) RC4 based libssl ciphersuites are now classed as "weak" ciphers and are
305 disabled by default. They can be re-enabled using the
306 enable-weak-ssl-ciphers option to Configure.
309 *) If the server has ALPN configured, but supports no protocols that the
310 client advertises, send a fatal "no_application_protocol" alert.
311 This behaviour is SHALL in RFC 7301, though it isn't universally
312 implemented by other servers.
315 *) Add X25519 support.
316 Add ASN.1 and EVP_PKEY methods for X25519. This includes support
317 for public and private key encoding using the format documented in
318 draft-ietf-curdle-pkix-02. The coresponding EVP_PKEY method supports
319 key generation and key derivation.
321 TLS support complies with draft-ietf-tls-rfc4492bis-08 and uses
325 *) Deprecate SRP_VBASE_get_by_user.
326 SRP_VBASE_get_by_user had inconsistent memory management behaviour.
327 In order to fix an unavoidable memory leak (CVE-2016-0798),
328 SRP_VBASE_get_by_user was changed to ignore the "fake user" SRP
329 seed, even if the seed is configured.
331 Users should use SRP_VBASE_get1_by_user instead. Note that in
332 SRP_VBASE_get1_by_user, caller must free the returned value. Note
333 also that even though configuring the SRP seed attempts to hide
334 invalid usernames by continuing the handshake with fake
335 credentials, this behaviour is not constant time and no strong
336 guarantees are made that the handshake is indistinguishable from
337 that of a valid user.
340 *) Configuration change; it's now possible to build dynamic engines
341 without having to build shared libraries and vice versa. This
342 only applies to the engines in engines/, those in crypto/engine/
343 will always be built into libcrypto (i.e. "static").
345 Building dynamic engines is enabled by default; to disable, use
346 the configuration option "disable-dynamic-engine".
348 The only requirements for building dynamic engines are the
349 presence of the DSO module and building with position independent
350 code, so they will also automatically be disabled if configuring
351 with "disable-dso" or "disable-pic".
353 The macros OPENSSL_NO_STATIC_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE
354 are also taken away from openssl/opensslconf.h, as they are
358 *) Configuration change; if there is a known flag to compile
359 position independent code, it will always be applied on the
360 libcrypto and libssl object files, and never on the application
361 object files. This means other libraries that use routines from
362 libcrypto / libssl can be made into shared libraries regardless
363 of how OpenSSL was configured.
365 If this isn't desirable, the configuration options "disable-pic"
366 or "no-pic" can be used to disable the use of PIC. This will
367 also disable building shared libraries and dynamic engines.
370 *) Removed JPAKE code. It was experimental and has no wide use.
373 *) The INSTALL_PREFIX Makefile variable has been renamed to
374 DESTDIR. That makes for less confusion on what this variable
375 is for. Also, the configuration option --install_prefix is
379 *) Heartbeat for TLS has been removed and is disabled by default
380 for DTLS; configure with enable-heartbeats. Code that uses the
381 old #define's might need to be updated.
382 [Emilia Käsper, Rich Salz]
384 *) Rename REF_CHECK to REF_DEBUG.
387 *) New "unified" build system
389 The "unified" build system is aimed to be a common system for all
390 platforms we support. With it comes new support for VMS.
392 This system builds supports building in a different directory tree
393 than the source tree. It produces one Makefile (for unix family
394 or lookalikes), or one descrip.mms (for VMS).
396 The source of information to make the Makefile / descrip.mms is
397 small files called 'build.info', holding the necessary
398 information for each directory with source to compile, and a
399 template in Configurations, like unix-Makefile.tmpl or
402 With this change, the library names were also renamed on Windows
403 and on VMS. They now have names that are closer to the standard
404 on Unix, and include the major version number, and in certain
405 cases, the architecture they are built for. See "Notes on shared
406 libraries" in INSTALL.
408 We rely heavily on the perl module Text::Template.
411 *) Added support for auto-initialisation and de-initialisation of the library.
412 OpenSSL no longer requires explicit init or deinit routines to be called,
413 except in certain circumstances. See the OPENSSL_init_crypto() and
414 OPENSSL_init_ssl() man pages for further information.
417 *) The arguments to the DTLSv1_listen function have changed. Specifically the
418 "peer" argument is now expected to be a BIO_ADDR object.
420 *) Rewrite of BIO networking library. The BIO library lacked consistent
421 support of IPv6, and adding it required some more extensive
422 modifications. This introduces the BIO_ADDR and BIO_ADDRINFO types,
423 which hold all types of addresses and chains of address information.
424 It also introduces a new API, with functions like BIO_socket,
425 BIO_connect, BIO_listen, BIO_lookup and a rewrite of BIO_accept.
426 The source/sink BIOs BIO_s_connect, BIO_s_accept and BIO_s_datagram
427 have been adapted accordingly.
430 *) RSA_padding_check_PKCS1_type_1 now accepts inputs with and without
434 *) CRIME protection: disable compression by default, even if OpenSSL is
435 compiled with zlib enabled. Applications can still enable compression
436 by calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by
437 using the SSL_CONF library to configure compression.
440 *) The signature of the session callback configured with
441 SSL_CTX_sess_set_get_cb was changed. The read-only input buffer
442 was explicitly marked as 'const unsigned char*' instead of
446 *) Always DPURIFY. Remove the use of uninitialized memory in the
447 RNG, and other conditional uses of DPURIFY. This makes -DPURIFY a no-op.
450 *) Removed many obsolete configuration items, including
451 DES_PTR, DES_RISC1, DES_RISC2, DES_INT
452 MD2_CHAR, MD2_INT, MD2_LONG
454 IDEA_SHORT, IDEA_LONG
455 RC2_SHORT, RC2_LONG, RC4_LONG, RC4_CHUNK, RC4_INDEX
456 [Rich Salz, with advice from Andy Polyakov]
458 *) Many BN internals have been moved to an internal header file.
459 [Rich Salz with help from Andy Polyakov]
461 *) Configuration and writing out the results from it has changed.
462 Files such as Makefile include/openssl/opensslconf.h and are now
463 produced through general templates, such as Makefile.in and
464 crypto/opensslconf.h.in and some help from the perl module
467 Also, the center of configuration information is no longer
468 Makefile. Instead, Configure produces a perl module in
469 configdata.pm which holds most of the config data (in the hash
470 table %config), the target data that comes from the target
471 configuration in one of the Configurations/*.conf files (in
475 *) To clarify their intended purposes, the Configure options
476 --prefix and --openssldir change their semantics, and become more
477 straightforward and less interdependent.
479 --prefix shall be used exclusively to give the location INSTALLTOP
480 where programs, scripts, libraries, include files and manuals are
481 going to be installed. The default is now /usr/local.
483 --openssldir shall be used exclusively to give the default
484 location OPENSSLDIR where certificates, private keys, CRLs are
485 managed. This is also where the default openssl.cnf gets
487 If the directory given with this option is a relative path, the
488 values of both the --prefix value and the --openssldir value will
489 be combined to become OPENSSLDIR.
490 The default for --openssldir is INSTALLTOP/ssl.
492 Anyone who uses --openssldir to specify where OpenSSL is to be
493 installed MUST change to use --prefix instead.
496 *) The GOST engine was out of date and therefore it has been removed. An up
497 to date GOST engine is now being maintained in an external repository.
498 See: https://wiki.openssl.org/index.php/Binaries. Libssl still retains
499 support for GOST ciphersuites (these are only activated if a GOST engine
503 *) EGD is no longer supported by default; use enable-egd when
505 [Ben Kaduk and Rich Salz]
507 *) The distribution now has Makefile.in files, which are used to
508 create Makefile's when Configure is run. *Configure must be run
509 before trying to build now.*
512 *) The return value for SSL_CIPHER_description() for error conditions
516 *) Support for RFC6698/RFC7671 DANE TLSA peer authentication.
518 Obtaining and performing DNSSEC validation of TLSA records is
519 the application's responsibility. The application provides
520 the TLSA records of its choice to OpenSSL, and these are then
521 used to authenticate the peer.
523 The TLSA records need not even come from DNS. They can, for
524 example, be used to implement local end-entity certificate or
525 trust-anchor "pinning", where the "pin" data takes the form
526 of TLSA records, which can augment or replace verification
527 based on the usual WebPKI public certification authorities.
530 *) Revert default OPENSSL_NO_DEPRECATED setting. Instead OpenSSL
531 continues to support deprecated interfaces in default builds.
532 However, applications are strongly advised to compile their
533 source files with -DOPENSSL_API_COMPAT=0x10100000L, which hides
534 the declarations of all interfaces deprecated in 0.9.8, 1.0.0
535 or the 1.1.0 releases.
537 In environments in which all applications have been ported to
538 not use any deprecated interfaces OpenSSL's Configure script
539 should be used with the --api=1.1.0 option to entirely remove
540 support for the deprecated features from the library and
541 unconditionally disable them in the installed headers.
542 Essentially the same effect can be achieved with the "no-deprecated"
543 argument to Configure, except that this will always restrict
544 the build to just the latest API, rather than a fixed API
547 As applications are ported to future revisions of the API,
548 they should update their compile-time OPENSSL_API_COMPAT define
549 accordingly, but in most cases should be able to continue to
550 compile with later releases.
552 The OPENSSL_API_COMPAT versions for 1.0.0, and 0.9.8 are
553 0x10000000L and 0x00908000L, respectively. However those
554 versions did not support the OPENSSL_API_COMPAT feature, and
555 so applications are not typically tested for explicit support
556 of just the undeprecated features of either release.
559 *) Add support for setting the minimum and maximum supported protocol.
560 It can bet set via the SSL_set_min_proto_version() and
561 SSL_set_max_proto_version(), or via the SSL_CONF's MinProtocol and
562 MaxProtcol. It's recommended to use the new APIs to disable
563 protocols instead of disabling individual protocols using
564 SSL_set_options() or SSL_CONF's Protocol. This change also
565 removes support for disabling TLS 1.2 in the OpenSSL TLS
566 client at compile time by defining OPENSSL_NO_TLS1_2_CLIENT.
569 *) Support for ChaCha20 and Poly1305 added to libcrypto and libssl.
572 *) New EC_KEY_METHOD, this replaces the older ECDSA_METHOD and ECDH_METHOD
573 and integrates ECDSA and ECDH functionality into EC. Implementations can
574 now redirect key generation and no longer need to convert to or from
577 Note: the ecdsa.h and ecdh.h headers are now no longer needed and just
578 include the ec.h header file instead.
581 *) Remove support for all 40 and 56 bit ciphers. This includes all the export
582 ciphers who are no longer supported and drops support the ephemeral RSA key
583 exchange. The LOW ciphers currently doesn't have any ciphers in it.
586 *) Made EVP_MD_CTX, EVP_MD, EVP_CIPHER_CTX, EVP_CIPHER and HMAC_CTX
587 opaque. For HMAC_CTX, the following constructors and destructors
590 HMAC_CTX *HMAC_CTX_new(void);
591 void HMAC_CTX_free(HMAC_CTX *ctx);
593 For EVP_MD and EVP_CIPHER, complete APIs to create, fill and
594 destroy such methods has been added. See EVP_MD_meth_new(3) and
595 EVP_CIPHER_meth_new(3) for documentation.
598 1) EVP_MD_CTX_cleanup(), EVP_CIPHER_CTX_cleanup() and
599 HMAC_CTX_cleanup() were removed. HMAC_CTX_reset() and
600 EVP_MD_CTX_reset() should be called instead to reinitialise
601 an already created structure.
602 2) For consistency with the majority of our object creators and
603 destructors, EVP_MD_CTX_(create|destroy) were renamed to
604 EVP_MD_CTX_(new|free). The old names are retained as macros
605 for deprecated builds.
608 *) Added ASYNC support. Libcrypto now includes the async sub-library to enable
609 cryptographic operations to be performed asynchronously as long as an
610 asynchronous capable engine is used. See the ASYNC_start_job() man page for
611 further details. Libssl has also had this capability integrated with the
612 introduction of the new mode SSL_MODE_ASYNC and associated error
613 SSL_ERROR_WANT_ASYNC. See the SSL_CTX_set_mode() and SSL_get_error() man
614 pages. This work was developed in partnership with Intel Corp.
617 *) SSL_{CTX_}set_ecdh_auto() has been removed and ECDH is support is
618 always enabled now. If you want to disable the support you should
619 exclude it using the list of supported ciphers. This also means that the
620 "-no_ecdhe" option has been removed from s_server.
623 *) SSL_{CTX}_set_tmp_ecdh() which can set 1 EC curve now internally calls
624 SSL_{CTX_}set1_curves() which can set a list.
627 *) Remove support for SSL_{CTX_}set_tmp_ecdh_callback(). You should set the
628 curve you want to support using SSL_{CTX_}set1_curves().
631 *) State machine rewrite. The state machine code has been significantly
632 refactored in order to remove much duplication of code and solve issues
633 with the old code (see ssl/statem/README for further details). This change
634 does have some associated API changes. Notably the SSL_state() function
635 has been removed and replaced by SSL_get_state which now returns an
636 "OSSL_HANDSHAKE_STATE" instead of an int. SSL_set_state() has been removed
637 altogether. The previous handshake states defined in ssl.h and ssl3.h have
641 *) All instances of the string "ssleay" in the public API were replaced
642 with OpenSSL (case-matching; e.g., OPENSSL_VERSION for #define's)
643 Some error codes related to internal RSA_eay API's were renamed.
646 *) The demo files in crypto/threads were moved to demo/threads.
649 *) Removed obsolete engines: 4758cca, aep, atalla, cswift, nuron, gmp,
651 [Matt Caswell, Rich Salz]
653 *) New ASN.1 embed macro.
655 New ASN.1 macro ASN1_EMBED. This is the same as ASN1_SIMPLE except the
656 structure is not allocated: it is part of the parent. That is instead of
664 This reduces memory fragmentation and make it impossible to accidentally
665 set a mandatory field to NULL.
667 This currently only works for some fields specifically a SEQUENCE, CHOICE,
668 or ASN1_STRING type which is part of a parent SEQUENCE. Since it is
669 equivalent to ASN1_SIMPLE it cannot be tagged, OPTIONAL, SET OF or
673 *) Remove EVP_CHECK_DES_KEY, a compile-time option that never compiled.
676 *) Removed DES and RC4 ciphersuites from DEFAULT. Also removed RC2 although
677 in 1.0.2 EXPORT was already removed and the only RC2 ciphersuite is also
678 an EXPORT one. COMPLEMENTOFDEFAULT has been updated accordingly to add
679 DES and RC4 ciphersuites.
682 *) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
683 This changes the decoding behaviour for some invalid messages,
684 though the change is mostly in the more lenient direction, and
685 legacy behaviour is preserved as much as possible.
688 *) Fix no-stdio build.
689 [ David Woodhouse <David.Woodhouse@intel.com> and also
690 Ivan Nestlerode <ivan.nestlerode@sonos.com> ]
692 *) New testing framework
693 The testing framework has been largely rewritten and is now using
694 perl and the perl modules Test::Harness and an extended variant of
695 Test::More called OpenSSL::Test to do its work. All test scripts in
696 test/ have been rewritten into test recipes, and all direct calls to
697 executables in test/Makefile have become individual recipes using the
698 simplified testing OpenSSL::Test::Simple.
700 For documentation on our testing modules, do:
702 perldoc test/testlib/OpenSSL/Test/Simple.pm
703 perldoc test/testlib/OpenSSL/Test.pm
707 *) Revamped memory debug; only -DCRYPTO_MDEBUG and -DCRYPTO_MDEBUG_ABORT
708 are used; the latter aborts on memory leaks (usually checked on exit).
709 Some undocumented "set malloc, etc., hooks" functions were removed
710 and others were changed. All are now documented.
713 *) In DSA_generate_parameters_ex, if the provided seed is too short,
715 [Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
717 *) Rewrite PSK to support ECDHE_PSK, DHE_PSK and RSA_PSK. Add ciphersuites
718 from RFC4279, RFC4785, RFC5487, RFC5489.
720 Thanks to Christian J. Dietrich and Giuseppe D'Angelo for the
721 original RSA_PSK patch.
724 *) Dropped support for the SSL3_FLAGS_DELAY_CLIENT_FINISHED flag. This SSLeay
725 era flag was never set throughout the codebase (only read). Also removed
726 SSL3_FLAGS_POP_BUFFER which was only used if
727 SSL3_FLAGS_DELAY_CLIENT_FINISHED was also set.
730 *) Changed the default name options in the "ca", "crl", "req" and "x509"
731 to be "oneline" instead of "compat".
734 *) Remove SSL_OP_TLS_BLOCK_PADDING_BUG. This is SSLeay legacy, we're
735 not aware of clients that still exhibit this bug, and the workaround
736 hasn't been working properly for a while.
739 *) The return type of BIO_number_read() and BIO_number_written() as well as
740 the corresponding num_read and num_write members in the BIO structure has
741 changed from unsigned long to uint64_t. On platforms where an unsigned
742 long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is
746 *) Given the pervasive nature of TLS extensions it is inadvisable to run
747 OpenSSL without support for them. It also means that maintaining
748 the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
749 not well tested). Therefore the OPENSSL_NO_TLSEXT option has been removed.
752 *) Removed support for the two export grade static DH ciphersuites
753 EXP-DH-RSA-DES-CBC-SHA and EXP-DH-DSS-DES-CBC-SHA. These two ciphersuites
754 were newly added (along with a number of other static DH ciphersuites) to
755 1.0.2. However the two export ones have *never* worked since they were
756 introduced. It seems strange in any case to be adding new export
757 ciphersuites, and given "logjam" it also does not seem correct to fix them.
760 *) Version negotiation has been rewritten. In particular SSLv23_method(),
761 SSLv23_client_method() and SSLv23_server_method() have been deprecated,
762 and turned into macros which simply call the new preferred function names
763 TLS_method(), TLS_client_method() and TLS_server_method(). All new code
764 should use the new names instead. Also as part of this change the ssl23.h
765 header file has been removed.
768 *) Support for Kerberos ciphersuites in TLS (RFC2712) has been removed. This
769 code and the associated standard is no longer considered fit-for-purpose.
772 *) RT2547 was closed. When generating a private key, try to make the
773 output file readable only by the owner. This behavior change might
774 be noticeable when interacting with other software.
776 *) Documented all exdata functions. Added CRYPTO_free_ex_index.
780 *) Added HTTP GET support to the ocsp command.
783 *) Changed default digest for the dgst and enc commands from MD5 to
787 *) RAND_pseudo_bytes has been deprecated. Users should use RAND_bytes instead.
790 *) Added support for TLS extended master secret from
791 draft-ietf-tls-session-hash-03.txt. Thanks for Alfredo Pironti for an
792 initial patch which was a great help during development.
795 *) All libssl internal structures have been removed from the public header
796 files, and the OPENSSL_NO_SSL_INTERN option has been removed (since it is
797 now redundant). Users should not attempt to access internal structures
798 directly. Instead they should use the provided API functions.
801 *) config has been changed so that by default OPENSSL_NO_DEPRECATED is used.
802 Access to deprecated functions can be re-enabled by running config with
803 "enable-deprecated". In addition applications wishing to use deprecated
804 functions must define OPENSSL_USE_DEPRECATED. Note that this new behaviour
805 will, by default, disable some transitive includes that previously existed
806 in the header files (e.g. ec.h will no longer, by default, include bn.h)
809 *) Added support for OCB mode. OpenSSL has been granted a patent license
810 compatible with the OpenSSL license for use of OCB. Details are available
811 at https://www.openssl.org/source/OCB-patent-grant-OpenSSL.pdf. Support
812 for OCB can be removed by calling config with no-ocb.
815 *) SSLv2 support has been removed. It still supports receiving a SSLv2
816 compatible client hello.
819 *) Increased the minimal RSA keysize from 256 to 512 bits [Rich Salz],
820 done while fixing the error code for the key-too-small case.
821 [Annie Yousar <a.yousar@informatik.hu-berlin.de>]
823 *) CA.sh has been removmed; use CA.pl instead.
826 *) Removed old DES API.
829 *) Remove various unsupported platforms:
835 Sinix/ReliantUNIX RM400
840 16-bit platforms such as WIN16
843 *) Clean up OPENSSL_NO_xxx #define's
844 Use setbuf() and remove OPENSSL_NO_SETVBUF_IONBF
845 Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
846 OPENSSL_NO_EC{DH,DSA} merged into OPENSSL_NO_EC
847 OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
848 OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
849 Remove OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
850 OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
851 OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
852 OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY
853 Remove MS_STATIC; it's a relic from platforms <32 bits.
856 *) Cleaned up dead code
857 Remove all but one '#ifdef undef' which is to be looked at.
860 *) Clean up calling of xxx_free routines.
861 Just like free(), fix most of the xxx_free routines to accept
862 NULL. Remove the non-null checks from callers. Save much code.
865 *) Add secure heap for storage of private keys (when possible).
866 Add BIO_s_secmem(), CBIGNUM, etc.
867 Contributed by Akamai Technologies under our Corporate CLA.
870 *) Experimental support for a new, fast, unbiased prime candidate generator,
871 bn_probable_prime_dh_coprime(). Not currently used by any prime generator.
872 [Felix Laurie von Massenbach <felix@erbridge.co.uk>]
874 *) New output format NSS in the sess_id command line tool. This allows
875 exporting the session id and the master key in NSS keylog format.
876 [Martin Kaiser <martin@kaiser.cx>]
878 *) Harmonize version and its documentation. -f flag is used to display
880 [mancha <mancha1@zoho.com>]
882 *) Fix eckey_priv_encode so it immediately returns an error upon a failure
883 in i2d_ECPrivateKey. Thanks to Ted Unangst for feedback on this issue.
884 [mancha <mancha1@zoho.com>]
886 *) Fix some double frees. These are not thought to be exploitable.
887 [mancha <mancha1@zoho.com>]
889 *) A missing bounds check in the handling of the TLS heartbeat extension
890 can be used to reveal up to 64k of memory to a connected client or
893 Thanks for Neel Mehta of Google Security for discovering this bug and to
894 Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
895 preparing the fix (CVE-2014-0160)
896 [Adam Langley, Bodo Moeller]
898 *) Fix for the attack described in the paper "Recovering OpenSSL
899 ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
900 by Yuval Yarom and Naomi Benger. Details can be obtained from:
901 http://eprint.iacr.org/2014/140
903 Thanks to Yuval Yarom and Naomi Benger for discovering this
904 flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
905 [Yuval Yarom and Naomi Benger]
907 *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
908 this fixes a limitation in previous versions of OpenSSL.
911 *) Experimental encrypt-then-mac support.
913 Experimental support for encrypt then mac from
914 draft-gutmann-tls-encrypt-then-mac-02.txt
916 To enable it set the appropriate extension number (0x42 for the test
917 server) using e.g. -DTLSEXT_TYPE_encrypt_then_mac=0x42
919 For non-compliant peers (i.e. just about everything) this should have no
922 WARNING: EXPERIMENTAL, SUBJECT TO CHANGE.
926 *) Add EVP support for key wrapping algorithms, to avoid problems with
927 existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
928 the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
929 algorithms and include tests cases.
932 *) Extend CMS code to support RSA-PSS signatures and RSA-OAEP for
936 *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
937 MGF1 digest and OAEP label.
940 *) Make openssl verify return errors.
941 [Chris Palmer <palmer@google.com> and Ben Laurie]
943 *) New function ASN1_TIME_diff to calculate the difference between two
944 ASN1_TIME structures or one structure and the current time.
947 *) Update fips_test_suite to support multiple command line options. New
948 test to induce all self test errors in sequence and check expected
952 *) Add FIPS_{rsa,dsa,ecdsa}_{sign,verify} functions which digest and
953 sign or verify all in one operation.
956 *) Add fips_algvs: a multicall fips utility incorporating all the algorithm
957 test programs and fips_test_suite. Includes functionality to parse
958 the minimal script output of fipsalgest.pl directly.
961 *) Add authorisation parameter to FIPS_module_mode_set().
964 *) Add FIPS selftest for ECDH algorithm using P-224 and B-233 curves.
967 *) Use separate DRBG fields for internal and external flags. New function
968 FIPS_drbg_health_check() to perform on demand health checking. Add
969 generation tests to fips_test_suite with reduced health check interval to
970 demonstrate periodic health checking. Add "nodh" option to
971 fips_test_suite to skip very slow DH test.
974 *) New function FIPS_get_cipherbynid() to lookup FIPS supported ciphers
978 *) More extensive health check for DRBG checking many more failure modes.
979 New function FIPS_selftest_drbg_all() to handle every possible DRBG
980 combination: call this in fips_test_suite.
983 *) Add support for canonical generation of DSA parameter 'g'. See
986 *) Add support for HMAC DRBG from SP800-90. Update DRBG algorithm test and
987 POST to handle HMAC cases.
990 *) Add functions FIPS_module_version() and FIPS_module_version_text()
991 to return numerical and string versions of the FIPS module number.
994 *) Rename FIPS_mode_set and FIPS_mode to FIPS_module_mode_set and
995 FIPS_module_mode. FIPS_mode and FIPS_mode_set will be implemented
996 outside the validated module in the FIPS capable OpenSSL.
999 *) Minor change to DRBG entropy callback semantics. In some cases
1000 there is no multiple of the block length between min_len and
1001 max_len. Allow the callback to return more than max_len bytes
1002 of entropy but discard any extra: it is the callback's responsibility
1003 to ensure that the extra data discarded does not impact the
1004 requested amount of entropy.
1007 *) Add PRNG security strength checks to RSA, DSA and ECDSA using
1008 information in FIPS186-3, SP800-57 and SP800-131A.
1011 *) CCM support via EVP. Interface is very similar to GCM case except we
1012 must supply all data in one chunk (i.e. no update, final) and the
1013 message length must be supplied if AAD is used. Add algorithm test
1017 *) Initial version of POST overhaul. Add POST callback to allow the status
1018 of POST to be monitored and/or failures induced. Modify fips_test_suite
1019 to use callback. Always run all selftests even if one fails.
1022 *) XTS support including algorithm test driver in the fips_gcmtest program.
1023 Note: this does increase the maximum key length from 32 to 64 bytes but
1024 there should be no binary compatibility issues as existing applications
1025 will never use XTS mode.
1028 *) Extensive reorganisation of FIPS PRNG behaviour. Remove all dependencies
1029 to OpenSSL RAND code and replace with a tiny FIPS RAND API which also
1030 performs algorithm blocking for unapproved PRNG types. Also do not
1031 set PRNG type in FIPS_mode_set(): leave this to the application.
1032 Add default OpenSSL DRBG handling: sets up FIPS PRNG and seeds with
1033 the standard OpenSSL PRNG: set additional data to a date time vector.
1036 *) Rename old X9.31 PRNG functions of the form FIPS_rand* to FIPS_x931*.
1037 This shouldn't present any incompatibility problems because applications
1038 shouldn't be using these directly and any that are will need to rethink
1039 anyway as the X9.31 PRNG is now deprecated by FIPS 140-2
1042 *) Extensive self tests and health checking required by SP800-90 DRBG.
1043 Remove strength parameter from FIPS_drbg_instantiate and always
1044 instantiate at maximum supported strength.
1047 *) Add ECDH code to fips module and fips_ecdhvs for primitives only testing.
1050 *) New algorithm test program fips_dhvs to handle DH primitives only testing.
1053 *) New function DH_compute_key_padded() to compute a DH key and pad with
1054 leading zeroes if needed: this complies with SP800-56A et al.
1057 *) Initial implementation of SP800-90 DRBGs for Hash and CTR. Not used by
1058 anything, incomplete, subject to change and largely untested at present.
1061 *) Modify fipscanisteronly build option to only build the necessary object
1062 files by filtering FIPS_EX_OBJ through a perl script in crypto/Makefile.
1065 *) Add experimental option FIPSSYMS to give all symbols in
1066 fipscanister.o and FIPS or fips prefix. This will avoid
1067 conflicts with future versions of OpenSSL. Add perl script
1068 util/fipsas.pl to preprocess assembly language source files
1069 and rename any affected symbols.
1072 *) Add selftest checks and algorithm block of non-fips algorithms in
1073 FIPS mode. Remove DES2 from selftests.
1076 *) Add ECDSA code to fips module. Add tiny fips_ecdsa_check to just
1077 return internal method without any ENGINE dependencies. Add new
1078 tiny fips sign and verify functions.
1081 *) New build option no-ec2m to disable characteristic 2 code.
1084 *) New build option "fipscanisteronly". This only builds fipscanister.o
1085 and (currently) associated fips utilities. Uses the file Makefile.fips
1086 instead of Makefile.org as the prototype.
1089 *) Add some FIPS mode restrictions to GCM. Add internal IV generator.
1090 Update fips_gcmtest to use IV generator.
1093 *) Initial, experimental EVP support for AES-GCM. AAD can be input by
1094 setting output buffer to NULL. The *Final function must be
1095 called although it will not retrieve any additional data. The tag
1096 can be set or retrieved with a ctrl. The IV length is by default 12
1097 bytes (96 bits) but can be set to an alternative value. If the IV
1098 length exceeds the maximum IV length (currently 16 bytes) it cannot be
1102 *) New flag in ciphers: EVP_CIPH_FLAG_CUSTOM_CIPHER. This means the
1103 underlying do_cipher function handles all cipher semantics itself
1104 including padding and finalisation. This is useful if (for example)
1105 an ENGINE cipher handles block padding itself. The behaviour of
1106 do_cipher is subtly changed if this flag is set: the return value
1107 is the number of characters written to the output buffer (zero is
1108 no longer an error code) or a negative error code. Also if the
1109 input buffer is NULL and length 0 finalisation should be performed.
1112 *) If a candidate issuer certificate is already part of the constructed
1113 path ignore it: new debug notification X509_V_ERR_PATH_LOOP for this case.
1116 *) Improve forward-security support: add functions
1118 void SSL_CTX_set_not_resumable_session_callback(SSL_CTX *ctx, int (*cb)(SSL *ssl, int is_forward_secure))
1119 void SSL_set_not_resumable_session_callback(SSL *ssl, int (*cb)(SSL *ssl, int is_forward_secure))
1121 for use by SSL/TLS servers; the callback function will be called whenever a
1122 new session is created, and gets to decide whether the session may be
1123 cached to make it resumable (return 0) or not (return 1). (As by the
1124 SSL/TLS protocol specifications, the session_id sent by the server will be
1125 empty to indicate that the session is not resumable; also, the server will
1126 not generate RFC 4507 (RFC 5077) session tickets.)
1128 A simple reasonable callback implementation is to return is_forward_secure.
1129 This parameter will be set to 1 or 0 depending on the ciphersuite selected
1130 by the SSL/TLS server library, indicating whether it can provide forward
1132 [Emilia Käsper <emilia.kasper@esat.kuleuven.be> (Google)]
1134 *) New -verify_name option in command line utilities to set verification
1138 *) Initial CMAC implementation. WARNING: EXPERIMENTAL, API MAY CHANGE.
1139 Add CMAC pkey methods.
1142 *) Experimental renegotiation in s_server -www mode. If the client
1143 browses /reneg connection is renegotiated. If /renegcert it is
1144 renegotiated requesting a certificate.
1147 *) Add an "external" session cache for debugging purposes to s_server. This
1148 should help trace issues which normally are only apparent in deployed
1149 multi-process servers.
1152 *) Extensive audit of libcrypto with DEBUG_UNUSED. Fix many cases where
1153 return value is ignored. NB. The functions RAND_add(), RAND_seed(),
1154 BIO_set_cipher() and some obscure PEM functions were changed so they
1155 can now return an error. The RAND changes required a change to the
1156 RAND_METHOD structure.
1159 *) New macro __owur for "OpenSSL Warn Unused Result". This makes use of
1160 a gcc attribute to warn if the result of a function is ignored. This
1161 is enable if DEBUG_UNUSED is set. Add to several functions in evp.h
1162 whose return value is often ignored.
1165 *) New -noct, -requestct, -requirect and -ctlogfile options for s_client.
1166 These allow SCTs (signed certificate timestamps) to be requested and
1167 validated when establishing a connection.
1168 [Rob Percival <robpercival@google.com>]
1170 Changes between 1.0.2g and 1.0.2h [3 May 2016]
1172 *) Prevent padding oracle in AES-NI CBC MAC check
1174 A MITM attacker can use a padding oracle attack to decrypt traffic
1175 when the connection uses an AES CBC cipher and the server support
1178 This issue was introduced as part of the fix for Lucky 13 padding
1179 attack (CVE-2013-0169). The padding check was rewritten to be in
1180 constant time by making sure that always the same bytes are read and
1181 compared against either the MAC or padding bytes. But it no longer
1182 checked that there was enough data to have both the MAC and padding
1185 This issue was reported by Juraj Somorovsky using TLS-Attacker.
1189 *) Fix EVP_EncodeUpdate overflow
1191 An overflow can occur in the EVP_EncodeUpdate() function which is used for
1192 Base64 encoding of binary data. If an attacker is able to supply very large
1193 amounts of input data then a length check can overflow resulting in a heap
1196 Internally to OpenSSL the EVP_EncodeUpdate() function is primarily used by
1197 the PEM_write_bio* family of functions. These are mainly used within the
1198 OpenSSL command line applications, so any application which processes data
1199 from an untrusted source and outputs it as a PEM file should be considered
1200 vulnerable to this issue. User applications that call these APIs directly
1201 with large amounts of untrusted data may also be vulnerable.
1203 This issue was reported by Guido Vranken.
1207 *) Fix EVP_EncryptUpdate overflow
1209 An overflow can occur in the EVP_EncryptUpdate() function. If an attacker
1210 is able to supply very large amounts of input data after a previous call to
1211 EVP_EncryptUpdate() with a partial block then a length check can overflow
1212 resulting in a heap corruption. Following an analysis of all OpenSSL
1213 internal usage of the EVP_EncryptUpdate() function all usage is one of two
1214 forms. The first form is where the EVP_EncryptUpdate() call is known to be
1215 the first called function after an EVP_EncryptInit(), and therefore that
1216 specific call must be safe. The second form is where the length passed to
1217 EVP_EncryptUpdate() can be seen from the code to be some small value and
1218 therefore there is no possibility of an overflow. Since all instances are
1219 one of these two forms, it is believed that there can be no overflows in
1220 internal code due to this problem. It should be noted that
1221 EVP_DecryptUpdate() can call EVP_EncryptUpdate() in certain code paths.
1222 Also EVP_CipherUpdate() is a synonym for EVP_EncryptUpdate(). All instances
1223 of these calls have also been analysed too and it is believed there are no
1224 instances in internal usage where an overflow could occur.
1226 This issue was reported by Guido Vranken.
1230 *) Prevent ASN.1 BIO excessive memory allocation
1232 When ASN.1 data is read from a BIO using functions such as d2i_CMS_bio()
1233 a short invalid encoding can cause allocation of large amounts of memory
1234 potentially consuming excessive resources or exhausting memory.
1236 Any application parsing untrusted data through d2i BIO functions is
1237 affected. The memory based functions such as d2i_X509() are *not* affected.
1238 Since the memory based functions are used by the TLS library, TLS
1239 applications are not affected.
1241 This issue was reported by Brian Carpenter.
1247 ASN1 Strings that are over 1024 bytes can cause an overread in applications
1248 using the X509_NAME_oneline() function on EBCDIC systems. This could result
1249 in arbitrary stack data being returned in the buffer.
1251 This issue was reported by Guido Vranken.
1255 *) Modify behavior of ALPN to invoke callback after SNI/servername
1256 callback, such that updates to the SSL_CTX affect ALPN.
1259 *) Remove LOW from the DEFAULT cipher list. This removes singles DES from the
1263 *) Only remove the SSLv2 methods with the no-ssl2-method option. When the
1264 methods are enabled and ssl2 is disabled the methods return NULL.
1267 Changes between 1.0.2f and 1.0.2g [1 Mar 2016]
1269 * Disable weak ciphers in SSLv3 and up in default builds of OpenSSL.
1270 Builds that are not configured with "enable-weak-ssl-ciphers" will not
1271 provide any "EXPORT" or "LOW" strength ciphers.
1274 * Disable SSLv2 default build, default negotiation and weak ciphers. SSLv2
1275 is by default disabled at build-time. Builds that are not configured with
1276 "enable-ssl2" will not support SSLv2. Even if "enable-ssl2" is used,
1277 users who want to negotiate SSLv2 via the version-flexible SSLv23_method()
1278 will need to explicitly call either of:
1280 SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2);
1282 SSL_clear_options(ssl, SSL_OP_NO_SSLv2);
1284 as appropriate. Even if either of those is used, or the application
1285 explicitly uses the version-specific SSLv2_method() or its client and
1286 server variants, SSLv2 ciphers vulnerable to exhaustive search key
1287 recovery have been removed. Specifically, the SSLv2 40-bit EXPORT
1288 ciphers, and SSLv2 56-bit DES are no longer available.
1292 *) Fix a double-free in DSA code
1294 A double free bug was discovered when OpenSSL parses malformed DSA private
1295 keys and could lead to a DoS attack or memory corruption for applications
1296 that receive DSA private keys from untrusted sources. This scenario is
1299 This issue was reported to OpenSSL by Adam Langley(Google/BoringSSL) using
1304 *) Disable SRP fake user seed to address a server memory leak.
1306 Add a new method SRP_VBASE_get1_by_user that handles the seed properly.
1308 SRP_VBASE_get_by_user had inconsistent memory management behaviour.
1309 In order to fix an unavoidable memory leak, SRP_VBASE_get_by_user
1310 was changed to ignore the "fake user" SRP seed, even if the seed
1313 Users should use SRP_VBASE_get1_by_user instead. Note that in
1314 SRP_VBASE_get1_by_user, caller must free the returned value. Note
1315 also that even though configuring the SRP seed attempts to hide
1316 invalid usernames by continuing the handshake with fake
1317 credentials, this behaviour is not constant time and no strong
1318 guarantees are made that the handshake is indistinguishable from
1319 that of a valid user.
1323 *) Fix BN_hex2bn/BN_dec2bn NULL pointer deref/heap corruption
1325 In the BN_hex2bn function the number of hex digits is calculated using an
1326 int value |i|. Later |bn_expand| is called with a value of |i * 4|. For
1327 large values of |i| this can result in |bn_expand| not allocating any
1328 memory because |i * 4| is negative. This can leave the internal BIGNUM data
1329 field as NULL leading to a subsequent NULL ptr deref. For very large values
1330 of |i|, the calculation |i * 4| could be a positive value smaller than |i|.
1331 In this case memory is allocated to the internal BIGNUM data field, but it
1332 is insufficiently sized leading to heap corruption. A similar issue exists
1333 in BN_dec2bn. This could have security consequences if BN_hex2bn/BN_dec2bn
1334 is ever called by user applications with very large untrusted hex/dec data.
1335 This is anticipated to be a rare occurrence.
1337 All OpenSSL internal usage of these functions use data that is not expected
1338 to be untrusted, e.g. config file data or application command line
1339 arguments. If user developed applications generate config file data based
1340 on untrusted data then it is possible that this could also lead to security
1341 consequences. This is also anticipated to be rare.
1343 This issue was reported to OpenSSL by Guido Vranken.
1347 *) Fix memory issues in BIO_*printf functions
1349 The internal |fmtstr| function used in processing a "%s" format string in
1350 the BIO_*printf functions could overflow while calculating the length of a
1351 string and cause an OOB read when printing very long strings.
1353 Additionally the internal |doapr_outch| function can attempt to write to an
1354 OOB memory location (at an offset from the NULL pointer) in the event of a
1355 memory allocation failure. In 1.0.2 and below this could be caused where
1356 the size of a buffer to be allocated is greater than INT_MAX. E.g. this
1357 could be in processing a very long "%s" format string. Memory leaks can
1360 The first issue may mask the second issue dependent on compiler behaviour.
1361 These problems could enable attacks where large amounts of untrusted data
1362 is passed to the BIO_*printf functions. If applications use these functions
1363 in this way then they could be vulnerable. OpenSSL itself uses these
1364 functions when printing out human-readable dumps of ASN.1 data. Therefore
1365 applications that print this data could be vulnerable if the data is from
1366 untrusted sources. OpenSSL command line applications could also be
1367 vulnerable where they print out ASN.1 data, or if untrusted data is passed
1368 as command line arguments.
1370 Libssl is not considered directly vulnerable. Additionally certificates etc
1371 received via remote connections via libssl are also unlikely to be able to
1372 trigger these issues because of message size limits enforced within libssl.
1374 This issue was reported to OpenSSL Guido Vranken.
1378 *) Side channel attack on modular exponentiation
1380 A side-channel attack was found which makes use of cache-bank conflicts on
1381 the Intel Sandy-Bridge microarchitecture which could lead to the recovery
1382 of RSA keys. The ability to exploit this issue is limited as it relies on
1383 an attacker who has control of code in a thread running on the same
1384 hyper-threaded core as the victim thread which is performing decryptions.
1386 This issue was reported to OpenSSL by Yuval Yarom, The University of
1387 Adelaide and NICTA, Daniel Genkin, Technion and Tel Aviv University, and
1388 Nadia Heninger, University of Pennsylvania with more information at
1389 http://cachebleed.info.
1393 *) Change the req app to generate a 2048-bit RSA/DSA key by default,
1394 if no keysize is specified with default_bits. This fixes an
1395 omission in an earlier change that changed all RSA/DSA key generation
1396 apps to use 2048 bits by default.
1399 Changes between 1.0.2e and 1.0.2f [28 Jan 2016]
1400 *) DH small subgroups
1402 Historically OpenSSL only ever generated DH parameters based on "safe"
1403 primes. More recently (in version 1.0.2) support was provided for
1404 generating X9.42 style parameter files such as those required for RFC 5114
1405 support. The primes used in such files may not be "safe". Where an
1406 application is using DH configured with parameters based on primes that are
1407 not "safe" then an attacker could use this fact to find a peer's private
1408 DH exponent. This attack requires that the attacker complete multiple
1409 handshakes in which the peer uses the same private DH exponent. For example
1410 this could be used to discover a TLS server's private DH exponent if it's
1411 reusing the private DH exponent or it's using a static DH ciphersuite.
1413 OpenSSL provides the option SSL_OP_SINGLE_DH_USE for ephemeral DH (DHE) in
1414 TLS. It is not on by default. If the option is not set then the server
1415 reuses the same private DH exponent for the life of the server process and
1416 would be vulnerable to this attack. It is believed that many popular
1417 applications do set this option and would therefore not be at risk.
1419 The fix for this issue adds an additional check where a "q" parameter is
1420 available (as is the case in X9.42 based parameters). This detects the
1421 only known attack, and is the only possible defense for static DH
1422 ciphersuites. This could have some performance impact.
1424 Additionally the SSL_OP_SINGLE_DH_USE option has been switched on by
1425 default and cannot be disabled. This could have some performance impact.
1427 This issue was reported to OpenSSL by Antonio Sanso (Adobe).
1431 *) SSLv2 doesn't block disabled ciphers
1433 A malicious client can negotiate SSLv2 ciphers that have been disabled on
1434 the server and complete SSLv2 handshakes even if all SSLv2 ciphers have
1435 been disabled, provided that the SSLv2 protocol was not also disabled via
1438 This issue was reported to OpenSSL on 26th December 2015 by Nimrod Aviram
1439 and Sebastian Schinzel.
1443 Changes between 1.0.2d and 1.0.2e [3 Dec 2015]
1445 *) BN_mod_exp may produce incorrect results on x86_64
1447 There is a carry propagating bug in the x86_64 Montgomery squaring
1448 procedure. No EC algorithms are affected. Analysis suggests that attacks
1449 against RSA and DSA as a result of this defect would be very difficult to
1450 perform and are not believed likely. Attacks against DH are considered just
1451 feasible (although very difficult) because most of the work necessary to
1452 deduce information about a private key may be performed offline. The amount
1453 of resources required for such an attack would be very significant and
1454 likely only accessible to a limited number of attackers. An attacker would
1455 additionally need online access to an unpatched system using the target
1456 private key in a scenario with persistent DH parameters and a private
1457 key that is shared between multiple clients. For example this can occur by
1458 default in OpenSSL DHE based SSL/TLS ciphersuites.
1460 This issue was reported to OpenSSL by Hanno Böck.
1464 *) Certificate verify crash with missing PSS parameter
1466 The signature verification routines will crash with a NULL pointer
1467 dereference if presented with an ASN.1 signature using the RSA PSS
1468 algorithm and absent mask generation function parameter. Since these
1469 routines are used to verify certificate signature algorithms this can be
1470 used to crash any certificate verification operation and exploited in a
1471 DoS attack. Any application which performs certificate verification is
1472 vulnerable including OpenSSL clients and servers which enable client
1475 This issue was reported to OpenSSL by Loïc Jonas Etienne (Qnective AG).
1479 *) X509_ATTRIBUTE memory leak
1481 When presented with a malformed X509_ATTRIBUTE structure OpenSSL will leak
1482 memory. This structure is used by the PKCS#7 and CMS routines so any
1483 application which reads PKCS#7 or CMS data from untrusted sources is
1484 affected. SSL/TLS is not affected.
1486 This issue was reported to OpenSSL by Adam Langley (Google/BoringSSL) using
1491 *) Rewrite EVP_DecodeUpdate (base64 decoding) to fix several bugs.
1492 This changes the decoding behaviour for some invalid messages,
1493 though the change is mostly in the more lenient direction, and
1494 legacy behaviour is preserved as much as possible.
1497 *) In DSA_generate_parameters_ex, if the provided seed is too short,
1499 [Rich Salz and Ismo Puustinen <ismo.puustinen@intel.com>]
1501 Changes between 1.0.2c and 1.0.2d [9 Jul 2015]
1503 *) Alternate chains certificate forgery
1505 During certificate verification, OpenSSL will attempt to find an
1506 alternative certificate chain if the first attempt to build such a chain
1507 fails. An error in the implementation of this logic can mean that an
1508 attacker could cause certain checks on untrusted certificates to be
1509 bypassed, such as the CA flag, enabling them to use a valid leaf
1510 certificate to act as a CA and "issue" an invalid certificate.
1512 This issue was reported to OpenSSL by Adam Langley/David Benjamin
1516 Changes between 1.0.2b and 1.0.2c [12 Jun 2015]
1518 *) Fix HMAC ABI incompatibility. The previous version introduced an ABI
1519 incompatibility in the handling of HMAC. The previous ABI has now been
1523 Changes between 1.0.2a and 1.0.2b [11 Jun 2015]
1525 *) Malformed ECParameters causes infinite loop
1527 When processing an ECParameters structure OpenSSL enters an infinite loop
1528 if the curve specified is over a specially malformed binary polynomial
1531 This can be used to perform denial of service against any
1532 system which processes public keys, certificate requests or
1533 certificates. This includes TLS clients and TLS servers with
1534 client authentication enabled.
1536 This issue was reported to OpenSSL by Joseph Barr-Pixton.
1540 *) Exploitable out-of-bounds read in X509_cmp_time
1542 X509_cmp_time does not properly check the length of the ASN1_TIME
1543 string and can read a few bytes out of bounds. In addition,
1544 X509_cmp_time accepts an arbitrary number of fractional seconds in the
1547 An attacker can use this to craft malformed certificates and CRLs of
1548 various sizes and potentially cause a segmentation fault, resulting in
1549 a DoS on applications that verify certificates or CRLs. TLS clients
1550 that verify CRLs are affected. TLS clients and servers with client
1551 authentication enabled may be affected if they use custom verification
1554 This issue was reported to OpenSSL by Robert Swiecki (Google), and
1555 independently by Hanno Böck.
1559 *) PKCS7 crash with missing EnvelopedContent
1561 The PKCS#7 parsing code does not handle missing inner EncryptedContent
1562 correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs
1563 with missing content and trigger a NULL pointer dereference on parsing.
1565 Applications that decrypt PKCS#7 data or otherwise parse PKCS#7
1566 structures from untrusted sources are affected. OpenSSL clients and
1567 servers are not affected.
1569 This issue was reported to OpenSSL by Michal Zalewski (Google).
1573 *) CMS verify infinite loop with unknown hash function
1575 When verifying a signedData message the CMS code can enter an infinite loop
1576 if presented with an unknown hash function OID. This can be used to perform
1577 denial of service against any system which verifies signedData messages using
1579 This issue was reported to OpenSSL by Johannes Bauer.
1583 *) Race condition handling NewSessionTicket
1585 If a NewSessionTicket is received by a multi-threaded client when attempting to
1586 reuse a previous ticket then a race condition can occur potentially leading to
1587 a double free of the ticket data.
1591 *) Only support 256-bit or stronger elliptic curves with the
1592 'ecdh_auto' setting (server) or by default (client). Of supported
1593 curves, prefer P-256 (both).
1596 Changes between 1.0.2 and 1.0.2a [19 Mar 2015]
1598 *) ClientHello sigalgs DoS fix
1600 If a client connects to an OpenSSL 1.0.2 server and renegotiates with an
1601 invalid signature algorithms extension a NULL pointer dereference will
1602 occur. This can be exploited in a DoS attack against the server.
1604 This issue was was reported to OpenSSL by David Ramos of Stanford
1607 [Stephen Henson and Matt Caswell]
1609 *) Multiblock corrupted pointer fix
1611 OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This
1612 feature only applies on 64 bit x86 architecture platforms that support AES
1613 NI instructions. A defect in the implementation of "multiblock" can cause
1614 OpenSSL's internal write buffer to become incorrectly set to NULL when
1615 using non-blocking IO. Typically, when the user application is using a
1616 socket BIO for writing, this will only result in a failed connection.
1617 However if some other BIO is used then it is likely that a segmentation
1618 fault will be triggered, thus enabling a potential DoS attack.
1620 This issue was reported to OpenSSL by Daniel Danner and Rainer Mueller.
1624 *) Segmentation fault in DTLSv1_listen fix
1626 The DTLSv1_listen function is intended to be stateless and processes the
1627 initial ClientHello from many peers. It is common for user code to loop
1628 over the call to DTLSv1_listen until a valid ClientHello is received with
1629 an associated cookie. A defect in the implementation of DTLSv1_listen means
1630 that state is preserved in the SSL object from one invocation to the next
1631 that can lead to a segmentation fault. Errors processing the initial
1632 ClientHello can trigger this scenario. An example of such an error could be
1633 that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only
1636 This issue was reported to OpenSSL by Per Allansson.
1640 *) Segmentation fault in ASN1_TYPE_cmp fix
1642 The function ASN1_TYPE_cmp will crash with an invalid read if an attempt is
1643 made to compare ASN.1 boolean types. Since ASN1_TYPE_cmp is used to check
1644 certificate signature algorithm consistency this can be used to crash any
1645 certificate verification operation and exploited in a DoS attack. Any
1646 application which performs certificate verification is vulnerable including
1647 OpenSSL clients and servers which enable client authentication.
1651 *) Segmentation fault for invalid PSS parameters fix
1653 The signature verification routines will crash with a NULL pointer
1654 dereference if presented with an ASN.1 signature using the RSA PSS
1655 algorithm and invalid parameters. Since these routines are used to verify
1656 certificate signature algorithms this can be used to crash any
1657 certificate verification operation and exploited in a DoS attack. Any
1658 application which performs certificate verification is vulnerable including
1659 OpenSSL clients and servers which enable client authentication.
1661 This issue was was reported to OpenSSL by Brian Carpenter.
1665 *) ASN.1 structure reuse memory corruption fix
1667 Reusing a structure in ASN.1 parsing may allow an attacker to cause
1668 memory corruption via an invalid write. Such reuse is and has been
1669 strongly discouraged and is believed to be rare.
1671 Applications that parse structures containing CHOICE or ANY DEFINED BY
1672 components may be affected. Certificate parsing (d2i_X509 and related
1673 functions) are however not affected. OpenSSL clients and servers are
1678 *) PKCS7 NULL pointer dereferences fix
1680 The PKCS#7 parsing code does not handle missing outer ContentInfo
1681 correctly. An attacker can craft malformed ASN.1-encoded PKCS#7 blobs with
1682 missing content and trigger a NULL pointer dereference on parsing.
1684 Applications that verify PKCS#7 signatures, decrypt PKCS#7 data or
1685 otherwise parse PKCS#7 structures from untrusted sources are
1686 affected. OpenSSL clients and servers are not affected.
1688 This issue was reported to OpenSSL by Michal Zalewski (Google).
1692 *) DoS via reachable assert in SSLv2 servers fix
1694 A malicious client can trigger an OPENSSL_assert (i.e., an abort) in
1695 servers that both support SSLv2 and enable export cipher suites by sending
1696 a specially crafted SSLv2 CLIENT-MASTER-KEY message.
1698 This issue was discovered by Sean Burford (Google) and Emilia Käsper
1699 (OpenSSL development team).
1703 *) Empty CKE with client auth and DHE fix
1705 If client auth is used then a server can seg fault in the event of a DHE
1706 ciphersuite being selected and a zero length ClientKeyExchange message
1707 being sent by the client. This could be exploited in a DoS attack.
1711 *) Handshake with unseeded PRNG fix
1713 Under certain conditions an OpenSSL 1.0.2 client can complete a handshake
1714 with an unseeded PRNG. The conditions are:
1715 - The client is on a platform where the PRNG has not been seeded
1716 automatically, and the user has not seeded manually
1717 - A protocol specific client method version has been used (i.e. not
1718 SSL_client_methodv23)
1719 - A ciphersuite is used that does not require additional random data from
1720 the PRNG beyond the initial ClientHello client random (e.g. PSK-RC4-SHA).
1722 If the handshake succeeds then the client random that has been used will
1723 have been generated from a PRNG with insufficient entropy and therefore the
1724 output may be predictable.
1726 For example using the following command with an unseeded openssl will
1727 succeed on an unpatched platform:
1729 openssl s_client -psk 1a2b3c4d -tls1_2 -cipher PSK-RC4-SHA
1733 *) Use After Free following d2i_ECPrivatekey error fix
1735 A malformed EC private key file consumed via the d2i_ECPrivateKey function
1736 could cause a use after free condition. This, in turn, could cause a double
1737 free in several private key parsing functions (such as d2i_PrivateKey
1738 or EVP_PKCS82PKEY) and could lead to a DoS attack or memory corruption
1739 for applications that receive EC private keys from untrusted
1740 sources. This scenario is considered rare.
1742 This issue was discovered by the BoringSSL project and fixed in their
1747 *) X509_to_X509_REQ NULL pointer deref fix
1749 The function X509_to_X509_REQ will crash with a NULL pointer dereference if
1750 the certificate key is invalid. This function is rarely used in practice.
1752 This issue was discovered by Brian Carpenter.
1756 *) Removed the export ciphers from the DEFAULT ciphers
1759 Changes between 1.0.1l and 1.0.2 [22 Jan 2015]
1761 *) Facilitate "universal" ARM builds targeting range of ARM ISAs, e.g.
1762 ARMv5 through ARMv8, as opposite to "locking" it to single one.
1763 So far those who have to target multiple platforms would compromise
1764 and argue that binary targeting say ARMv5 would still execute on
1765 ARMv8. "Universal" build resolves this compromise by providing
1766 near-optimal performance even on newer platforms.
1769 *) Accelerated NIST P-256 elliptic curve implementation for x86_64
1770 (other platforms pending).
1771 [Shay Gueron & Vlad Krasnov (Intel Corp), Andy Polyakov]
1773 *) Add support for the SignedCertificateTimestampList certificate and
1774 OCSP response extensions from RFC6962.
1777 *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
1778 for corner cases. (Certain input points at infinity could lead to
1779 bogus results, with non-infinity inputs mapped to infinity too.)
1782 *) Initial support for PowerISA 2.0.7, first implemented in POWER8.
1783 This covers AES, SHA256/512 and GHASH. "Initial" means that most
1784 common cases are optimized and there still is room for further
1785 improvements. Vector Permutation AES for Altivec is also added.
1788 *) Add support for little-endian ppc64 Linux target.
1789 [Marcelo Cerri (IBM)]
1791 *) Initial support for AMRv8 ISA crypto extensions. This covers AES,
1792 SHA1, SHA256 and GHASH. "Initial" means that most common cases
1793 are optimized and there still is room for further improvements.
1794 Both 32- and 64-bit modes are supported.
1795 [Andy Polyakov, Ard Biesheuvel (Linaro)]
1797 *) Improved ARMv7 NEON support.
1800 *) Support for SPARC Architecture 2011 crypto extensions, first
1801 implemented in SPARC T4. This covers AES, DES, Camellia, SHA1,
1802 SHA256/512, MD5, GHASH and modular exponentiation.
1803 [Andy Polyakov, David Miller]
1805 *) Accelerated modular exponentiation for Intel processors, a.k.a.
1807 [Shay Gueron & Vlad Krasnov (Intel Corp)]
1809 *) Support for new and upcoming Intel processors, including AVX2,
1810 BMI and SHA ISA extensions. This includes additional "stitched"
1811 implementations, AESNI-SHA256 and GCM, and multi-buffer support
1814 This work was sponsored by Intel Corp.
1817 *) Support for DTLS 1.2. This adds two sets of DTLS methods: DTLS_*_method()
1818 supports both DTLS 1.2 and 1.0 and should use whatever version the peer
1819 supports and DTLSv1_2_*_method() which supports DTLS 1.2 only.
1822 *) Use algorithm specific chains in SSL_CTX_use_certificate_chain_file():
1823 this fixes a limitation in previous versions of OpenSSL.
1826 *) Extended RSA OAEP support via EVP_PKEY API. Options to specify digest,
1827 MGF1 digest and OAEP label.
1830 *) Add EVP support for key wrapping algorithms, to avoid problems with
1831 existing code the flag EVP_CIPHER_CTX_WRAP_ALLOW has to be set in
1832 the EVP_CIPHER_CTX or an error is returned. Add AES and DES3 wrap
1833 algorithms and include tests cases.
1836 *) Add functions to allocate and set the fields of an ECDSA_METHOD
1838 [Douglas E. Engert, Steve Henson]
1840 *) New functions OPENSSL_gmtime_diff and ASN1_TIME_diff to find the
1841 difference in days and seconds between two tm or ASN1_TIME structures.
1844 *) Add -rev test option to s_server to just reverse order of characters
1845 received by client and send back to server. Also prints an abbreviated
1846 summary of the connection parameters.
1849 *) New option -brief for s_client and s_server to print out a brief summary
1850 of connection parameters.
1853 *) Add callbacks for arbitrary TLS extensions.
1854 [Trevor Perrin <trevp@trevp.net> and Ben Laurie]
1856 *) New option -crl_download in several openssl utilities to download CRLs
1857 from CRLDP extension in certificates.
1860 *) New options -CRL and -CRLform for s_client and s_server for CRLs.
1863 *) New function X509_CRL_diff to generate a delta CRL from the difference
1864 of two full CRLs. Add support to "crl" utility.
1867 *) New functions to set lookup_crls function and to retrieve
1868 X509_STORE from X509_STORE_CTX.
1871 *) Print out deprecated issuer and subject unique ID fields in
1875 *) Extend OCSP I/O functions so they can be used for simple general purpose
1876 HTTP as well as OCSP. New wrapper function which can be used to download
1877 CRLs using the OCSP API.
1880 *) Delegate command line handling in s_client/s_server to SSL_CONF APIs.
1883 *) SSL_CONF* functions. These provide a common framework for application
1884 configuration using configuration files or command lines.
1887 *) SSL/TLS tracing code. This parses out SSL/TLS records using the
1888 message callback and prints the results. Needs compile time option
1889 "enable-ssl-trace". New options to s_client and s_server to enable
1893 *) New ctrl and macro to retrieve supported points extensions.
1894 Print out extension in s_server and s_client.
1897 *) New functions to retrieve certificate signature and signature
1901 *) Add functions to retrieve and manipulate the raw cipherlist sent by a
1905 *) New Suite B modes for TLS code. These use and enforce the requirements
1906 of RFC6460: restrict ciphersuites, only permit Suite B algorithms and
1907 only use Suite B curves. The Suite B modes can be set by using the
1908 strings "SUITEB128", "SUITEB192" or "SUITEB128ONLY" for the cipherstring.
1911 *) New chain verification flags for Suite B levels of security. Check
1912 algorithms are acceptable when flags are set in X509_verify_cert.
1915 *) Make tls1_check_chain return a set of flags indicating checks passed
1916 by a certificate chain. Add additional tests to handle client
1917 certificates: checks for matching certificate type and issuer name
1921 *) If an attempt is made to use a signature algorithm not in the peer
1922 preference list abort the handshake. If client has no suitable
1923 signature algorithms in response to a certificate request do not
1924 use the certificate.
1927 *) If server EC tmp key is not in client preference list abort handshake.
1930 *) Add support for certificate stores in CERT structure. This makes it
1931 possible to have different stores per SSL structure or one store in
1932 the parent SSL_CTX. Include distinct stores for certificate chain
1933 verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
1934 to build and store a certificate chain in CERT structure: returning
1935 an error if the chain cannot be built: this will allow applications
1936 to test if a chain is correctly configured.
1938 Note: if the CERT based stores are not set then the parent SSL_CTX
1939 store is used to retain compatibility with existing behaviour.
1943 *) New function ssl_set_client_disabled to set a ciphersuite disabled
1944 mask based on the current session, check mask when sending client
1945 hello and checking the requested ciphersuite.
1948 *) New ctrls to retrieve and set certificate types in a certificate
1949 request message. Print out received values in s_client. If certificate
1950 types is not set with custom values set sensible values based on
1951 supported signature algorithms.
1954 *) Support for distinct client and server supported signature algorithms.
1957 *) Add certificate callback. If set this is called whenever a certificate
1958 is required by client or server. An application can decide which
1959 certificate chain to present based on arbitrary criteria: for example
1960 supported signature algorithms. Add very simple example to s_server.
1961 This fixes many of the problems and restrictions of the existing client
1962 certificate callback: for example you can now clear an existing
1963 certificate and specify the whole chain.
1966 *) Add new "valid_flags" field to CERT_PKEY structure which determines what
1967 the certificate can be used for (if anything). Set valid_flags field
1968 in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
1969 to have similar checks in it.
1971 Add new "cert_flags" field to CERT structure and include a "strict mode".
1972 This enforces some TLS certificate requirements (such as only permitting
1973 certificate signature algorithms contained in the supported algorithms
1974 extension) which some implementations ignore: this option should be used
1975 with caution as it could cause interoperability issues.
1978 *) Update and tidy signature algorithm extension processing. Work out
1979 shared signature algorithms based on preferences and peer algorithms
1980 and print them out in s_client and s_server. Abort handshake if no
1981 shared signature algorithms.
1984 *) Add new functions to allow customised supported signature algorithms
1985 for SSL and SSL_CTX structures. Add options to s_client and s_server
1989 *) New function SSL_certs_clear() to delete all references to certificates
1990 from an SSL structure. Before this once a certificate had been added
1991 it couldn't be removed.
1994 *) Integrate hostname, email address and IP address checking with certificate
1995 verification. New verify options supporting checking in openssl utility.
1998 *) Fixes and wildcard matching support to hostname and email checking
1999 functions. Add manual page.
2000 [Florian Weimer (Red Hat Product Security Team)]
2002 *) New functions to check a hostname email or IP address against a
2003 certificate. Add options x509 utility to print results of checks against
2007 *) Fix OCSP checking.
2008 [Rob Stradling <rob.stradling@comodo.com> and Ben Laurie]
2010 *) Initial experimental support for explicitly trusted non-root CAs.
2011 OpenSSL still tries to build a complete chain to a root but if an
2012 intermediate CA has a trust setting included that is used. The first
2013 setting is used: whether to trust (e.g., -addtrust option to the x509
2017 *) Add -trusted_first option which attempts to find certificates in the
2018 trusted store even if an untrusted chain is also supplied.
2021 *) MIPS assembly pack updates: support for MIPS32r2 and SmartMIPS ASE,
2022 platform support for Linux and Android.
2025 *) Support for linux-x32, ILP32 environment in x86_64 framework.
2028 *) Experimental multi-implementation support for FIPS capable OpenSSL.
2029 When in FIPS mode the approved implementations are used as normal,
2030 when not in FIPS mode the internal unapproved versions are used instead.
2031 This means that the FIPS capable OpenSSL isn't forced to use the
2032 (often lower performance) FIPS implementations outside FIPS mode.
2035 *) Transparently support X9.42 DH parameters when calling
2036 PEM_read_bio_DHparameters. This means existing applications can handle
2037 the new parameter format automatically.
2040 *) Initial experimental support for X9.42 DH parameter format: mainly
2041 to support use of 'q' parameter for RFC5114 parameters.
2044 *) Add DH parameters from RFC5114 including test data to dhtest.
2047 *) Support for automatic EC temporary key parameter selection. If enabled
2048 the most preferred EC parameters are automatically used instead of
2049 hardcoded fixed parameters. Now a server just has to call:
2050 SSL_CTX_set_ecdh_auto(ctx, 1) and the server will automatically
2051 support ECDH and use the most appropriate parameters.
2054 *) Enhance and tidy EC curve and point format TLS extension code. Use
2055 static structures instead of allocation if default values are used.
2056 New ctrls to set curves we wish to support and to retrieve shared curves.
2057 Print out shared curves in s_server. New options to s_server and s_client
2058 to set list of supported curves.
2061 *) New ctrls to retrieve supported signature algorithms and
2062 supported curve values as an array of NIDs. Extend openssl utility
2063 to print out received values.
2066 *) Add new APIs EC_curve_nist2nid and EC_curve_nid2nist which convert
2067 between NIDs and the more common NIST names such as "P-256". Enhance
2068 ecparam utility and ECC method to recognise the NIST names for curves.
2071 *) Enhance SSL/TLS certificate chain handling to support different
2072 chains for each certificate instead of one chain in the parent SSL_CTX.
2075 *) Support for fixed DH ciphersuite client authentication: where both
2076 server and client use DH certificates with common parameters.
2079 *) Support for fixed DH ciphersuites: those requiring DH server
2083 *) New function i2d_re_X509_tbs for re-encoding the TBS portion of
2085 Note: Related 1.0.2-beta specific macros X509_get_cert_info,
2086 X509_CINF_set_modified, X509_CINF_get_issuer, X509_CINF_get_extensions and
2087 X509_CINF_get_signature were reverted post internal team review.
2089 Changes between 1.0.1k and 1.0.1l [15 Jan 2015]
2091 *) Build fixes for the Windows and OpenVMS platforms
2092 [Matt Caswell and Richard Levitte]
2094 Changes between 1.0.1j and 1.0.1k [8 Jan 2015]
2096 *) Fix DTLS segmentation fault in dtls1_get_record. A carefully crafted DTLS
2097 message can cause a segmentation fault in OpenSSL due to a NULL pointer
2098 dereference. This could lead to a Denial Of Service attack. Thanks to
2099 Markus Stenberg of Cisco Systems, Inc. for reporting this issue.
2103 *) Fix DTLS memory leak in dtls1_buffer_record. A memory leak can occur in the
2104 dtls1_buffer_record function under certain conditions. In particular this
2105 could occur if an attacker sent repeated DTLS records with the same
2106 sequence number but for the next epoch. The memory leak could be exploited
2107 by an attacker in a Denial of Service attack through memory exhaustion.
2108 Thanks to Chris Mueller for reporting this issue.
2112 *) Fix issue where no-ssl3 configuration sets method to NULL. When openssl is
2113 built with the no-ssl3 option and a SSL v3 ClientHello is received the ssl
2114 method would be set to NULL which could later result in a NULL pointer
2115 dereference. Thanks to Frank Schmirler for reporting this issue.
2119 *) Abort handshake if server key exchange message is omitted for ephemeral
2122 Thanks to Karthikeyan Bhargavan of the PROSECCO team at INRIA for
2123 reporting this issue.
2127 *) Remove non-export ephemeral RSA code on client and server. This code
2128 violated the TLS standard by allowing the use of temporary RSA keys in
2129 non-export ciphersuites and could be used by a server to effectively
2130 downgrade the RSA key length used to a value smaller than the server
2131 certificate. Thanks for Karthikeyan Bhargavan of the PROSECCO team at
2132 INRIA or reporting this issue.
2136 *) Fixed issue where DH client certificates are accepted without verification.
2137 An OpenSSL server will accept a DH certificate for client authentication
2138 without the certificate verify message. This effectively allows a client to
2139 authenticate without the use of a private key. This only affects servers
2140 which trust a client certificate authority which issues certificates
2141 containing DH keys: these are extremely rare and hardly ever encountered.
2142 Thanks for Karthikeyan Bhargavan of the PROSECCO team at INRIA or reporting
2147 *) Ensure that the session ID context of an SSL is updated when its
2148 SSL_CTX is updated via SSL_set_SSL_CTX.
2150 The session ID context is typically set from the parent SSL_CTX,
2151 and can vary with the CTX.
2154 *) Fix various certificate fingerprint issues.
2156 By using non-DER or invalid encodings outside the signed portion of a
2157 certificate the fingerprint can be changed without breaking the signature.
2158 Although no details of the signed portion of the certificate can be changed
2159 this can cause problems with some applications: e.g. those using the
2160 certificate fingerprint for blacklists.
2162 1. Reject signatures with non zero unused bits.
2164 If the BIT STRING containing the signature has non zero unused bits reject
2165 the signature. All current signature algorithms require zero unused bits.
2167 2. Check certificate algorithm consistency.
2169 Check the AlgorithmIdentifier inside TBS matches the one in the
2170 certificate signature. NB: this will result in signature failure
2171 errors for some broken certificates.
2173 Thanks to Konrad Kraszewski from Google for reporting this issue.
2175 3. Check DSA/ECDSA signatures use DER.
2177 Re-encode DSA/ECDSA signatures and compare with the original received
2178 signature. Return an error if there is a mismatch.
2180 This will reject various cases including garbage after signature
2181 (thanks to Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS
2182 program for discovering this case) and use of BER or invalid ASN.1 INTEGERs
2183 (negative or with leading zeroes).
2185 Further analysis was conducted and fixes were developed by Stephen Henson
2186 of the OpenSSL core team.
2191 *) Correct Bignum squaring. Bignum squaring (BN_sqr) may produce incorrect
2192 results on some platforms, including x86_64. This bug occurs at random
2193 with a very low probability, and is not known to be exploitable in any
2194 way, though its exact impact is difficult to determine. Thanks to Pieter
2195 Wuille (Blockstream) who reported this issue and also suggested an initial
2196 fix. Further analysis was conducted by the OpenSSL development team and
2197 Adam Langley of Google. The final fix was developed by Andy Polyakov of
2198 the OpenSSL core team.
2202 *) Do not resume sessions on the server if the negotiated protocol
2203 version does not match the session's version. Resuming with a different
2204 version, while not strictly forbidden by the RFC, is of questionable
2205 sanity and breaks all known clients.
2206 [David Benjamin, Emilia Käsper]
2208 *) Tighten handling of the ChangeCipherSpec (CCS) message: reject
2209 early CCS messages during renegotiation. (Note that because
2210 renegotiation is encrypted, this early CCS was not exploitable.)
2213 *) Tighten client-side session ticket handling during renegotiation:
2214 ensure that the client only accepts a session ticket if the server sends
2215 the extension anew in the ServerHello. Previously, a TLS client would
2216 reuse the old extension state and thus accept a session ticket if one was
2217 announced in the initial ServerHello.
2219 Similarly, ensure that the client requires a session ticket if one
2220 was advertised in the ServerHello. Previously, a TLS client would
2221 ignore a missing NewSessionTicket message.
2224 Changes between 1.0.1i and 1.0.1j [15 Oct 2014]
2226 *) SRTP Memory Leak.
2228 A flaw in the DTLS SRTP extension parsing code allows an attacker, who
2229 sends a carefully crafted handshake message, to cause OpenSSL to fail
2230 to free up to 64k of memory causing a memory leak. This could be
2231 exploited in a Denial Of Service attack. This issue affects OpenSSL
2232 1.0.1 server implementations for both SSL/TLS and DTLS regardless of
2233 whether SRTP is used or configured. Implementations of OpenSSL that
2234 have been compiled with OPENSSL_NO_SRTP defined are not affected.
2236 The fix was developed by the OpenSSL team.
2240 *) Session Ticket Memory Leak.
2242 When an OpenSSL SSL/TLS/DTLS server receives a session ticket the
2243 integrity of that ticket is first verified. In the event of a session
2244 ticket integrity check failing, OpenSSL will fail to free memory
2245 causing a memory leak. By sending a large number of invalid session
2246 tickets an attacker could exploit this issue in a Denial Of Service
2251 *) Build option no-ssl3 is incomplete.
2253 When OpenSSL is configured with "no-ssl3" as a build option, servers
2254 could accept and complete a SSL 3.0 handshake, and clients could be
2255 configured to send them.
2257 [Akamai and the OpenSSL team]
2259 *) Add support for TLS_FALLBACK_SCSV.
2260 Client applications doing fallback retries should call
2261 SSL_set_mode(s, SSL_MODE_SEND_FALLBACK_SCSV).
2263 [Adam Langley, Bodo Moeller]
2265 *) Add additional DigestInfo checks.
2267 Re-encode DigestInto in DER and check against the original when
2268 verifying RSA signature: this will reject any improperly encoded
2269 DigestInfo structures.
2271 Note: this is a precautionary measure and no attacks are currently known.
2275 Changes between 1.0.1h and 1.0.1i [6 Aug 2014]
2277 *) Fix SRP buffer overrun vulnerability. Invalid parameters passed to the
2278 SRP code can be overrun an internal buffer. Add sanity check that
2279 g, A, B < N to SRP code.
2281 Thanks to Sean Devlin and Watson Ladd of Cryptography Services, NCC
2282 Group for discovering this issue.
2286 *) A flaw in the OpenSSL SSL/TLS server code causes the server to negotiate
2287 TLS 1.0 instead of higher protocol versions when the ClientHello message
2288 is badly fragmented. This allows a man-in-the-middle attacker to force a
2289 downgrade to TLS 1.0 even if both the server and the client support a
2290 higher protocol version, by modifying the client's TLS records.
2292 Thanks to David Benjamin and Adam Langley (Google) for discovering and
2293 researching this issue.
2297 *) OpenSSL DTLS clients enabling anonymous (EC)DH ciphersuites are subject
2298 to a denial of service attack. A malicious server can crash the client
2299 with a null pointer dereference (read) by specifying an anonymous (EC)DH
2300 ciphersuite and sending carefully crafted handshake messages.
2302 Thanks to Felix Gröbert (Google) for discovering and researching this
2307 *) By sending carefully crafted DTLS packets an attacker could cause openssl
2308 to leak memory. This can be exploited through a Denial of Service attack.
2309 Thanks to Adam Langley for discovering and researching this issue.
2313 *) An attacker can force openssl to consume large amounts of memory whilst
2314 processing DTLS handshake messages. This can be exploited through a
2315 Denial of Service attack.
2316 Thanks to Adam Langley for discovering and researching this issue.
2320 *) An attacker can force an error condition which causes openssl to crash
2321 whilst processing DTLS packets due to memory being freed twice. This
2322 can be exploited through a Denial of Service attack.
2323 Thanks to Adam Langley and Wan-Teh Chang for discovering and researching
2328 *) If a multithreaded client connects to a malicious server using a resumed
2329 session and the server sends an ec point format extension it could write
2330 up to 255 bytes to freed memory.
2332 Thanks to Gabor Tyukasz (LogMeIn Inc) for discovering and researching this
2337 *) A malicious server can crash an OpenSSL client with a null pointer
2338 dereference (read) by specifying an SRP ciphersuite even though it was not
2339 properly negotiated with the client. This can be exploited through a
2340 Denial of Service attack.
2342 Thanks to Joonas Kuorilehto and Riku Hietamäki (Codenomicon) for
2343 discovering and researching this issue.
2347 *) A flaw in OBJ_obj2txt may cause pretty printing functions such as
2348 X509_name_oneline, X509_name_print_ex et al. to leak some information
2349 from the stack. Applications may be affected if they echo pretty printing
2350 output to the attacker.
2352 Thanks to Ivan Fratric (Google) for discovering this issue.
2354 [Emilia Käsper, and Steve Henson]
2356 *) Fix ec_GFp_simple_points_make_affine (thus, EC_POINTs_mul etc.)
2357 for corner cases. (Certain input points at infinity could lead to
2358 bogus results, with non-infinity inputs mapped to infinity too.)
2361 Changes between 1.0.1g and 1.0.1h [5 Jun 2014]
2363 *) Fix for SSL/TLS MITM flaw. An attacker using a carefully crafted
2364 handshake can force the use of weak keying material in OpenSSL
2365 SSL/TLS clients and servers.
2367 Thanks to KIKUCHI Masashi (Lepidum Co. Ltd.) for discovering and
2368 researching this issue. (CVE-2014-0224)
2369 [KIKUCHI Masashi, Steve Henson]
2371 *) Fix DTLS recursion flaw. By sending an invalid DTLS handshake to an
2372 OpenSSL DTLS client the code can be made to recurse eventually crashing
2375 Thanks to Imre Rad (Search-Lab Ltd.) for discovering this issue.
2377 [Imre Rad, Steve Henson]
2379 *) Fix DTLS invalid fragment vulnerability. A buffer overrun attack can
2380 be triggered by sending invalid DTLS fragments to an OpenSSL DTLS
2381 client or server. This is potentially exploitable to run arbitrary
2382 code on a vulnerable client or server.
2384 Thanks to Jüri Aedla for reporting this issue. (CVE-2014-0195)
2385 [Jüri Aedla, Steve Henson]
2387 *) Fix bug in TLS code where clients enable anonymous ECDH ciphersuites
2388 are subject to a denial of service attack.
2390 Thanks to Felix Gröbert and Ivan Fratric at Google for discovering
2391 this issue. (CVE-2014-3470)
2392 [Felix Gröbert, Ivan Fratric, Steve Henson]
2394 *) Harmonize version and its documentation. -f flag is used to display
2396 [mancha <mancha1@zoho.com>]
2398 *) Fix eckey_priv_encode so it immediately returns an error upon a failure
2399 in i2d_ECPrivateKey.
2400 [mancha <mancha1@zoho.com>]
2402 *) Fix some double frees. These are not thought to be exploitable.
2403 [mancha <mancha1@zoho.com>]
2405 Changes between 1.0.1f and 1.0.1g [7 Apr 2014]
2407 *) A missing bounds check in the handling of the TLS heartbeat extension
2408 can be used to reveal up to 64k of memory to a connected client or
2411 Thanks for Neel Mehta of Google Security for discovering this bug and to
2412 Adam Langley <agl@chromium.org> and Bodo Moeller <bmoeller@acm.org> for
2413 preparing the fix (CVE-2014-0160)
2414 [Adam Langley, Bodo Moeller]
2416 *) Fix for the attack described in the paper "Recovering OpenSSL
2417 ECDSA Nonces Using the FLUSH+RELOAD Cache Side-channel Attack"
2418 by Yuval Yarom and Naomi Benger. Details can be obtained from:
2419 http://eprint.iacr.org/2014/140
2421 Thanks to Yuval Yarom and Naomi Benger for discovering this
2422 flaw and to Yuval Yarom for supplying a fix (CVE-2014-0076)
2423 [Yuval Yarom and Naomi Benger]
2425 *) TLS pad extension: draft-agl-tls-padding-03
2427 Workaround for the "TLS hang bug" (see FAQ and PR#2771): if the
2428 TLS client Hello record length value would otherwise be > 255 and
2429 less that 512 pad with a dummy extension containing zeroes so it
2430 is at least 512 bytes long.
2432 [Adam Langley, Steve Henson]
2434 Changes between 1.0.1e and 1.0.1f [6 Jan 2014]
2436 *) Fix for TLS record tampering bug. A carefully crafted invalid
2437 handshake could crash OpenSSL with a NULL pointer exception.
2438 Thanks to Anton Johansson for reporting this issues.
2441 *) Keep original DTLS digest and encryption contexts in retransmission
2442 structures so we can use the previous session parameters if they need
2443 to be resent. (CVE-2013-6450)
2446 *) Add option SSL_OP_SAFARI_ECDHE_ECDSA_BUG (part of SSL_OP_ALL) which
2447 avoids preferring ECDHE-ECDSA ciphers when the client appears to be
2448 Safari on OS X. Safari on OS X 10.8..10.8.3 advertises support for
2449 several ECDHE-ECDSA ciphers, but fails to negotiate them. The bug
2450 is fixed in OS X 10.8.4, but Apple have ruled out both hot fixing
2451 10.8..10.8.3 and forcing users to upgrade to 10.8.4 or newer.
2452 [Rob Stradling, Adam Langley]
2454 Changes between 1.0.1d and 1.0.1e [11 Feb 2013]
2456 *) Correct fix for CVE-2013-0169. The original didn't work on AES-NI
2457 supporting platforms or when small records were transferred.
2458 [Andy Polyakov, Steve Henson]
2460 Changes between 1.0.1c and 1.0.1d [5 Feb 2013]
2462 *) Make the decoding of SSLv3, TLS and DTLS CBC records constant time.
2464 This addresses the flaw in CBC record processing discovered by
2465 Nadhem Alfardan and Kenny Paterson. Details of this attack can be found
2466 at: http://www.isg.rhul.ac.uk/tls/
2468 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
2469 Security Group at Royal Holloway, University of London
2470 (www.isg.rhul.ac.uk) for discovering this flaw and Adam Langley and
2471 Emilia Käsper for the initial patch.
2473 [Emilia Käsper, Adam Langley, Ben Laurie, Andy Polyakov, Steve Henson]
2475 *) Fix flaw in AESNI handling of TLS 1.2 and 1.1 records for CBC mode
2476 ciphersuites which can be exploited in a denial of service attack.
2477 Thanks go to and to Adam Langley <agl@chromium.org> for discovering
2478 and detecting this bug and to Wolfgang Ettlinger
2479 <wolfgang.ettlinger@gmail.com> for independently discovering this issue.
2483 *) Return an error when checking OCSP signatures when key is NULL.
2484 This fixes a DoS attack. (CVE-2013-0166)
2487 *) Make openssl verify return errors.
2488 [Chris Palmer <palmer@google.com> and Ben Laurie]
2490 *) Call OCSP Stapling callback after ciphersuite has been chosen, so
2491 the right response is stapled. Also change SSL_get_certificate()
2492 so it returns the certificate actually sent.
2493 See http://rt.openssl.org/Ticket/Display.html?id=2836.
2494 [Rob Stradling <rob.stradling@comodo.com>]
2496 *) Fix possible deadlock when decoding public keys.
2499 *) Don't use TLS 1.0 record version number in initial client hello
2503 Changes between 1.0.1b and 1.0.1c [10 May 2012]
2505 *) Sanity check record length before skipping explicit IV in TLS
2506 1.2, 1.1 and DTLS to fix DoS attack.
2508 Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
2509 fuzzing as a service testing platform.
2513 *) Initialise tkeylen properly when encrypting CMS messages.
2514 Thanks to Solar Designer of Openwall for reporting this issue.
2517 *) In FIPS mode don't try to use composite ciphers as they are not
2521 Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
2523 *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
2524 1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
2525 mean any application compiled against OpenSSL 1.0.0 headers setting
2526 SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
2527 TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
2528 0x10000000L Any application which was previously compiled against
2529 OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
2530 will need to be recompiled as a result. Letting be results in
2531 inability to disable specifically TLS 1.1 and in client context,
2532 in unlike event, limit maximum offered version to TLS 1.0 [see below].
2535 *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
2536 disable just protocol X, but all protocols above X *if* there are
2537 protocols *below* X still enabled. In more practical terms it means
2538 that if application wants to disable TLS1.0 in favor of TLS1.1 and
2539 above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
2540 SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
2544 Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
2546 *) Check for potentially exploitable overflows in asn1_d2i_read_bio
2547 BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
2548 in CRYPTO_realloc_clean.
2550 Thanks to Tavis Ormandy, Google Security Team, for discovering this
2551 issue and to Adam Langley <agl@chromium.org> for fixing it.
2553 [Adam Langley (Google), Tavis Ormandy, Google Security Team]
2555 *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
2558 *) Workarounds for some broken servers that "hang" if a client hello
2559 record length exceeds 255 bytes.
2561 1. Do not use record version number > TLS 1.0 in initial client
2562 hello: some (but not all) hanging servers will now work.
2563 2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
2564 the number of ciphers sent in the client hello. This should be
2565 set to an even number, such as 50, for example by passing:
2566 -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
2567 Most broken servers should now work.
2568 3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
2569 TLS 1.2 client support entirely.
2572 *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
2575 Changes between 1.0.0h and 1.0.1 [14 Mar 2012]
2577 *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
2578 STRING form instead of a DigestInfo.
2581 *) The format used for MDC2 RSA signatures is inconsistent between EVP
2582 and the RSA_sign/RSA_verify functions. This was made more apparent when
2583 OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
2584 those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect
2585 the correct format in RSA_verify so both forms transparently work.
2588 *) Some servers which support TLS 1.0 can choke if we initially indicate
2589 support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
2590 encrypted premaster secret. As a workaround use the maximum permitted
2591 client version in client hello, this should keep such servers happy
2592 and still work with previous versions of OpenSSL.
2595 *) Add support for TLS/DTLS heartbeats.
2596 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2598 *) Add support for SCTP.
2599 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2601 *) Improved PRNG seeding for VOS.
2602 [Paul Green <Paul.Green@stratus.com>]
2604 *) Extensive assembler packs updates, most notably:
2606 - x86[_64]: AES-NI, PCLMULQDQ, RDRAND support;
2607 - x86[_64]: SSSE3 support (SHA1, vector-permutation AES);
2608 - x86_64: bit-sliced AES implementation;
2609 - ARM: NEON support, contemporary platforms optimizations;
2610 - s390x: z196 support;
2611 - *: GHASH and GF(2^m) multiplication implementations;
2615 *) Make TLS-SRP code conformant with RFC 5054 API cleanup
2616 (removal of unnecessary code)
2617 [Peter Sylvester <peter.sylvester@edelweb.fr>]
2619 *) Add TLS key material exporter from RFC 5705.
2622 *) Add DTLS-SRTP negotiation from RFC 5764.
2625 *) Add Next Protocol Negotiation,
2626 http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
2627 disabled with a no-npn flag to config or Configure. Code donated
2629 [Adam Langley <agl@google.com> and Ben Laurie]
2631 *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
2632 NIST-P256, NIST-P521, with constant-time single point multiplication on
2633 typical inputs. Compiler support for the nonstandard type __uint128_t is
2634 required to use this (present in gcc 4.4 and later, for 64-bit builds).
2635 Code made available under Apache License version 2.0.
2637 Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
2638 line to include this in your build of OpenSSL, and run "make depend" (or
2639 "make update"). This enables the following EC_METHODs:
2641 EC_GFp_nistp224_method()
2642 EC_GFp_nistp256_method()
2643 EC_GFp_nistp521_method()
2645 EC_GROUP_new_by_curve_name() will automatically use these (while
2646 EC_GROUP_new_curve_GFp() currently prefers the more flexible
2648 [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
2650 *) Use type ossl_ssize_t instad of ssize_t which isn't available on
2651 all platforms. Move ssize_t definition from e_os.h to the public
2652 header file e_os2.h as it now appears in public header file cms.h
2655 *) New -sigopt option to the ca, req and x509 utilities. Additional
2656 signature parameters can be passed using this option and in
2660 *) Add RSA PSS signing function. This will generate and set the
2661 appropriate AlgorithmIdentifiers for PSS based on those in the
2662 corresponding EVP_MD_CTX structure. No application support yet.
2665 *) Support for companion algorithm specific ASN1 signing routines.
2666 New function ASN1_item_sign_ctx() signs a pre-initialised
2667 EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
2668 the appropriate parameters.
2671 *) Add new algorithm specific ASN1 verification initialisation function
2672 to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
2673 handling will be the same no matter what EVP_PKEY_METHOD is used.
2674 Add a PSS handler to support verification of PSS signatures: checked
2675 against a number of sample certificates.
2678 *) Add signature printing for PSS. Add PSS OIDs.
2679 [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
2681 *) Add algorithm specific signature printing. An individual ASN1 method
2682 can now print out signatures instead of the standard hex dump.
2684 More complex signatures (e.g. PSS) can print out more meaningful
2685 information. Include DSA version that prints out the signature
2689 *) Password based recipient info support for CMS library: implementing
2693 *) Split password based encryption into PBES2 and PBKDF2 functions. This
2694 neatly separates the code into cipher and PBE sections and is required
2695 for some algorithms that split PBES2 into separate pieces (such as
2696 password based CMS).
2699 *) Session-handling fixes:
2700 - Fix handling of connections that are resuming with a session ID,
2701 but also support Session Tickets.
2702 - Fix a bug that suppressed issuing of a new ticket if the client
2703 presented a ticket with an expired session.
2704 - Try to set the ticket lifetime hint to something reasonable.
2705 - Make tickets shorter by excluding irrelevant information.
2706 - On the client side, don't ignore renewed tickets.
2707 [Adam Langley, Bodo Moeller (Google)]
2709 *) Fix PSK session representation.
2712 *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
2714 This work was sponsored by Intel.
2717 *) Add GCM support to TLS library. Some custom code is needed to split
2718 the IV between the fixed (from PRF) and explicit (from TLS record)
2719 portions. This adds all GCM ciphersuites supported by RFC5288 and
2720 RFC5289. Generalise some AES* cipherstrings to include GCM and
2721 add a special AESGCM string for GCM only.
2724 *) Expand range of ctrls for AES GCM. Permit setting invocation
2725 field on decrypt and retrieval of invocation field only on encrypt.
2728 *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
2729 As required by RFC5289 these ciphersuites cannot be used if for
2730 versions of TLS earlier than 1.2.
2733 *) For FIPS capable OpenSSL interpret a NULL default public key method
2734 as unset and return the appropriate default but do *not* set the default.
2735 This means we can return the appropriate method in applications that
2736 switch between FIPS and non-FIPS modes.
2739 *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
2740 ENGINE is used then we cannot handle that in the FIPS module so we
2741 keep original code iff non-FIPS operations are allowed.
2744 *) Add -attime option to openssl utilities.
2745 [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
2747 *) Redirect DSA and DH operations to FIPS module in FIPS mode.
2750 *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
2751 FIPS EC methods unconditionally for now.
2754 *) New build option no-ec2m to disable characteristic 2 code.
2757 *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
2758 all cases can be covered as some introduce binary incompatibilities.
2761 *) Redirect RSA operations to FIPS module including keygen,
2762 encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
2765 *) Add similar low level API blocking to ciphers.
2768 *) Low level digest APIs are not approved in FIPS mode: any attempt
2769 to use these will cause a fatal error. Applications that *really* want
2770 to use them can use the private_* version instead.
2773 *) Redirect cipher operations to FIPS module for FIPS builds.
2776 *) Redirect digest operations to FIPS module for FIPS builds.
2779 *) Update build system to add "fips" flag which will link in fipscanister.o
2780 for static and shared library builds embedding a signature if needed.
2783 *) Output TLS supported curves in preference order instead of numerical
2784 order. This is currently hardcoded for the highest order curves first.
2785 This should be configurable so applications can judge speed vs strength.
2788 *) Add TLS v1.2 server support for client authentication.
2791 *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
2795 *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
2796 FIPS modules versions.
2799 *) Add TLS v1.2 client side support for client authentication. Keep cache
2800 of handshake records longer as we don't know the hash algorithm to use
2801 until after the certificate request message is received.
2804 *) Initial TLS v1.2 client support. Add a default signature algorithms
2805 extension including all the algorithms we support. Parse new signature
2806 format in client key exchange. Relax some ECC signing restrictions for
2807 TLS v1.2 as indicated in RFC5246.
2810 *) Add server support for TLS v1.2 signature algorithms extension. Switch
2811 to new signature format when needed using client digest preference.
2812 All server ciphersuites should now work correctly in TLS v1.2. No client
2813 support yet and no support for client certificates.
2816 *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
2817 to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
2818 ciphersuites. At present only RSA key exchange ciphersuites work with
2819 TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
2820 SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
2821 and version checking.
2824 *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
2825 with this defined it will not be affected by any changes to ssl internal
2826 structures. Add several utility functions to allow openssl application
2827 to work with OPENSSL_NO_SSL_INTERN defined.
2831 [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
2833 *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
2836 *) Permit abbreviated handshakes when renegotiating using the function
2837 SSL_renegotiate_abbreviated().
2838 [Robin Seggelmann <seggelmann@fh-muenster.de>]
2840 *) Add call to ENGINE_register_all_complete() to
2841 ENGINE_load_builtin_engines(), so some implementations get used
2842 automatically instead of needing explicit application support.
2845 *) Add support for TLS key exporter as described in RFC5705.
2846 [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
2848 *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
2849 a few changes are required:
2851 Add SSL_OP_NO_TLSv1_1 flag.
2852 Add TLSv1_1 methods.
2853 Update version checking logic to handle version 1.1.
2854 Add explicit IV handling (ported from DTLS code).
2855 Add command line options to s_client/s_server.
2858 Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
2860 *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
2861 in CMS and PKCS7 code. When RSA decryption fails use a random key for
2862 content decryption and always return the same error. Note: this attack
2863 needs on average 2^20 messages so it only affects automated senders. The
2864 old behaviour can be re-enabled in the CMS code by setting the
2865 CMS_DEBUG_DECRYPT flag: this is useful for debugging and testing where
2866 an MMA defence is not necessary.
2867 Thanks to Ivan Nestlerode <inestlerode@us.ibm.com> for discovering
2868 this issue. (CVE-2012-0884)
2871 *) Fix CVE-2011-4619: make sure we really are receiving a
2872 client hello before rejecting multiple SGC restarts. Thanks to
2873 Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
2876 Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
2878 *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
2879 Thanks to Antonio Martin, Enterprise Secure Access Research and
2880 Development, Cisco Systems, Inc. for discovering this bug and
2881 preparing a fix. (CVE-2012-0050)
2884 Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
2886 *) Nadhem Alfardan and Kenny Paterson have discovered an extension
2887 of the Vaudenay padding oracle attack on CBC mode encryption
2888 which enables an efficient plaintext recovery attack against
2889 the OpenSSL implementation of DTLS. Their attack exploits timing
2890 differences arising during decryption processing. A research
2891 paper describing this attack can be found at:
2892 http://www.isg.rhul.ac.uk/~kp/dtls.pdf
2893 Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
2894 Security Group at Royal Holloway, University of London
2895 (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
2896 <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
2897 for preparing the fix. (CVE-2011-4108)
2898 [Robin Seggelmann, Michael Tuexen]
2900 *) Clear bytes used for block padding of SSL 3.0 records.
2902 [Adam Langley (Google)]
2904 *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
2905 Kadianakis <desnacked@gmail.com> for discovering this issue and
2906 Adam Langley for preparing the fix. (CVE-2011-4619)
2907 [Adam Langley (Google)]
2909 *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
2910 [Andrey Kulikov <amdeich@gmail.com>]
2912 *) Prevent malformed RFC3779 data triggering an assertion failure.
2913 Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
2914 and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
2915 [Rob Austein <sra@hactrn.net>]
2917 *) Improved PRNG seeding for VOS.
2918 [Paul Green <Paul.Green@stratus.com>]
2920 *) Fix ssl_ciph.c set-up race.
2921 [Adam Langley (Google)]
2923 *) Fix spurious failures in ecdsatest.c.
2924 [Emilia Käsper (Google)]
2926 *) Fix the BIO_f_buffer() implementation (which was mixing different
2927 interpretations of the '..._len' fields).
2928 [Adam Langley (Google)]
2930 *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
2931 BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
2932 threads won't reuse the same blinding coefficients.
2934 This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
2935 lock to call BN_BLINDING_invert_ex, and avoids one use of
2936 BN_BLINDING_update for each BN_BLINDING structure (previously,
2937 the last update always remained unused).
2938 [Emilia Käsper (Google)]
2940 *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
2941 [Bob Buckholz (Google)]
2943 Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
2945 *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
2946 by initialising X509_STORE_CTX properly. (CVE-2011-3207)
2947 [Kaspar Brand <ossl@velox.ch>]
2949 *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
2950 for multi-threaded use of ECDH. (CVE-2011-3210)
2951 [Adam Langley (Google)]
2953 *) Fix x509_name_ex_d2i memory leak on bad inputs.
2956 *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
2957 signature public key algorithm by using OID xref utilities instead.
2958 Before this you could only use some ECC ciphersuites with SHA1 only.
2961 *) Add protection against ECDSA timing attacks as mentioned in the paper
2962 by Billy Bob Brumley and Nicola Tuveri, see:
2964 http://eprint.iacr.org/2011/232.pdf
2966 [Billy Bob Brumley and Nicola Tuveri]
2968 Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
2970 *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
2971 [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
2973 *) Fix bug in string printing code: if *any* escaping is enabled we must
2974 escape the escape character (backslash) or the resulting string is
2978 Changes between 1.0.0b and 1.0.0c [2 Dec 2010]
2980 *) Disable code workaround for ancient and obsolete Netscape browsers
2981 and servers: an attacker can use it in a ciphersuite downgrade attack.
2982 Thanks to Martin Rex for discovering this bug. CVE-2010-4180
2985 *) Fixed J-PAKE implementation error, originally discovered by
2986 Sebastien Martini, further info and confirmation from Stefan
2987 Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
2990 Changes between 1.0.0a and 1.0.0b [16 Nov 2010]
2992 *) Fix extension code to avoid race conditions which can result in a buffer
2993 overrun vulnerability: resumed sessions must not be modified as they can
2994 be shared by multiple threads. CVE-2010-3864
2997 *) Fix WIN32 build system to correctly link an ENGINE directory into
3001 Changes between 1.0.0 and 1.0.0a [01 Jun 2010]
3003 *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover
3005 [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
3007 Changes between 0.9.8n and 1.0.0 [29 Mar 2010]
3009 *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
3010 context. The operation can be customised via the ctrl mechanism in
3011 case ENGINEs want to include additional functionality.
3014 *) Tolerate yet another broken PKCS#8 key format: private key value negative.
3017 *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
3018 output hashes compatible with older versions of OpenSSL.
3019 [Willy Weisz <weisz@vcpc.univie.ac.at>]
3021 *) Fix compression algorithm handling: if resuming a session use the
3022 compression algorithm of the resumed session instead of determining
3023 it from client hello again. Don't allow server to change algorithm.
3026 *) Add load_crls() function to apps tidying load_certs() too. Add option
3027 to verify utility to allow additional CRLs to be included.
3030 *) Update OCSP request code to permit adding custom headers to the request:
3031 some responders need this.
3034 *) The function EVP_PKEY_sign() returns <=0 on error: check return code
3036 [Julia Lawall <julia@diku.dk>]
3038 *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
3039 needlessly dereferenced structures, used obsolete functions and
3040 didn't handle all updated verify codes correctly.
3043 *) Disable MD2 in the default configuration.
3046 *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
3047 indicate the initial BIO being pushed or popped. This makes it possible
3048 to determine whether the BIO is the one explicitly called or as a result
3049 of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
3050 it handles reference counts correctly and doesn't zero out the I/O bio
3051 when it is not being explicitly popped. WARNING: applications which
3052 included workarounds for the old buggy behaviour will need to be modified
3053 or they could free up already freed BIOs.
3056 *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
3057 renaming to all platforms (within the 0.9.8 branch, this was
3058 done conditionally on Netware platforms to avoid a name clash).
3059 [Guenter <lists@gknw.net>]
3061 *) Add ECDHE and PSK support to DTLS.
3062 [Michael Tuexen <tuexen@fh-muenster.de>]
3064 *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
3068 *) Add "missing" function EVP_MD_flags() (without this the only way to
3069 retrieve a digest flags is by accessing the structure directly. Update
3070 EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
3071 or cipher is registered as in the "from" argument. Print out all
3072 registered digests in the dgst usage message instead of manually
3073 attempting to work them out.
3076 *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
3077 this allows the use of compression and extensions. Change default cipher
3078 string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
3079 by default unless an application cipher string requests it.
3082 *) Alter match criteria in PKCS12_parse(). It used to try to use local
3083 key ids to find matching certificates and keys but some PKCS#12 files
3084 don't follow the (somewhat unwritten) rules and this strategy fails.
3085 Now just gather all certificates together and the first private key
3086 then look for the first certificate that matches the key.
3089 *) Support use of registered digest and cipher names for dgst and cipher
3090 commands instead of having to add each one as a special case. So now
3097 openssl dgst -sha256 foo
3099 and this works for ENGINE based algorithms too.
3103 *) Update Gost ENGINE to support parameter files.
3104 [Victor B. Wagner <vitus@cryptocom.ru>]
3106 *) Support GeneralizedTime in ca utility.
3107 [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
3109 *) Enhance the hash format used for certificate directory links. The new
3110 form uses the canonical encoding (meaning equivalent names will work
3111 even if they aren't identical) and uses SHA1 instead of MD5. This form
3112 is incompatible with the older format and as a result c_rehash should
3113 be used to rebuild symbolic links.
3116 *) Make PKCS#8 the default write format for private keys, replacing the
3117 traditional format. This form is standardised, more secure and doesn't
3118 include an implicit MD5 dependency.
3121 *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
3122 committed to OpenSSL should pass this lot as a minimum.
3125 *) Add session ticket override functionality for use by EAP-FAST.
3126 [Jouni Malinen <j@w1.fi>]
3128 *) Modify HMAC functions to return a value. Since these can be implemented
3129 in an ENGINE errors can occur.
3132 *) Type-checked OBJ_bsearch_ex.
3135 *) Type-checked OBJ_bsearch. Also some constification necessitated
3136 by type-checking. Still to come: TXT_DB, bsearch(?),
3137 OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
3141 *) New function OPENSSL_gmtime_adj() to add a specific number of days and
3142 seconds to a tm structure directly, instead of going through OS
3143 specific date routines. This avoids any issues with OS routines such
3144 as the year 2038 bug. New *_adj() functions for ASN1 time structures
3145 and X509_time_adj_ex() to cover the extended range. The existing
3146 X509_time_adj() is still usable and will no longer have any date issues.
3149 *) Delta CRL support. New use deltas option which will attempt to locate
3150 and search any appropriate delta CRLs available.
3152 This work was sponsored by Google.
3155 *) Support for CRLs partitioned by reason code. Reorganise CRL processing
3156 code and add additional score elements. Validate alternate CRL paths
3157 as part of the CRL checking and indicate a new error "CRL path validation
3158 error" in this case. Applications wanting additional details can use
3159 the verify callback and check the new "parent" field. If this is not
3160 NULL CRL path validation is taking place. Existing applications won't
3161 see this because it requires extended CRL support which is off by
3164 This work was sponsored by Google.
3167 *) Support for freshest CRL extension.
3169 This work was sponsored by Google.
3172 *) Initial indirect CRL support. Currently only supported in the CRLs
3173 passed directly and not via lookup. Process certificate issuer
3174 CRL entry extension and lookup CRL entries by bother issuer name
3175 and serial number. Check and process CRL issuer entry in IDP extension.
3177 This work was sponsored by Google.
3180 *) Add support for distinct certificate and CRL paths. The CRL issuer
3181 certificate is validated separately in this case. Only enabled if
3182 an extended CRL support flag is set: this flag will enable additional
3183 CRL functionality in future.
3185 This work was sponsored by Google.
3188 *) Add support for policy mappings extension.
3190 This work was sponsored by Google.
3193 *) Fixes to pathlength constraint, self issued certificate handling,
3194 policy processing to align with RFC3280 and PKITS tests.
3196 This work was sponsored by Google.
3199 *) Support for name constraints certificate extension. DN, email, DNS
3200 and URI types are currently supported.
3202 This work was sponsored by Google.
3205 *) To cater for systems that provide a pointer-based thread ID rather
3206 than numeric, deprecate the current numeric thread ID mechanism and
3207 replace it with a structure and associated callback type. This
3208 mechanism allows a numeric "hash" to be extracted from a thread ID in
3209 either case, and on platforms where pointers are larger than 'long',
3210 mixing is done to help ensure the numeric 'hash' is usable even if it
3211 can't be guaranteed unique. The default mechanism is to use "&errno"
3212 as a pointer-based thread ID to distinguish between threads.
3214 Applications that want to provide their own thread IDs should now use
3215 CRYPTO_THREADID_set_callback() to register a callback that will call
3216 either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
3218 Note that ERR_remove_state() is now deprecated, because it is tied
3219 to the assumption that thread IDs are numeric. ERR_remove_state(0)
3220 to free the current thread's error state should be replaced by
3221 ERR_remove_thread_state(NULL).
3223 (This new approach replaces the functions CRYPTO_set_idptr_callback(),
3224 CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
3225 OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
3226 application was previously providing a numeric thread callback that
3227 was inappropriate for distinguishing threads, then uniqueness might
3228 have been obtained with &errno that happened immediately in the
3229 intermediate development versions of OpenSSL; this is no longer the
3230 case, the numeric thread callback will now override the automatic use
3232 [Geoff Thorpe, with help from Bodo Moeller]
3234 *) Initial support for different CRL issuing certificates. This covers a
3235 simple case where the self issued certificates in the chain exist and
3236 the real CRL issuer is higher in the existing chain.
3238 This work was sponsored by Google.
3241 *) Removed effectively defunct crypto/store from the build.
3244 *) Revamp of STACK to provide stronger type-checking. Still to come:
3245 TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
3246 ASN1_STRING, CONF_VALUE.
3249 *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
3250 RAM on SSL connections. This option can save about 34k per idle SSL.
3253 *) Revamp of LHASH to provide stronger type-checking. Still to come:
3254 STACK, TXT_DB, bsearch, qsort.
3257 *) Initial support for Cryptographic Message Syntax (aka CMS) based
3258 on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
3259 support for data, signedData, compressedData, digestedData and
3260 encryptedData, envelopedData types included. Scripts to check against
3261 RFC4134 examples draft and interop and consistency checks of many
3262 content types and variants.
3265 *) Add options to enc utility to support use of zlib compression BIO.
3268 *) Extend mk1mf to support importing of options and assembly language
3269 files from Configure script, currently only included in VC-WIN32.
3270 The assembly language rules can now optionally generate the source
3271 files from the associated perl scripts.
3274 *) Implement remaining functionality needed to support GOST ciphersuites.
3275 Interop testing has been performed using CryptoPro implementations.
3276 [Victor B. Wagner <vitus@cryptocom.ru>]
3278 *) s390x assembler pack.
3281 *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
3285 *) Implement Opaque PRF Input TLS extension as specified in
3286 draft-rescorla-tls-opaque-prf-input-00.txt. Since this is not an
3287 official specification yet and no extension type assignment by
3288 IANA exists, this extension (for now) will have to be explicitly
3289 enabled when building OpenSSL by providing the extension number
3290 to use. For example, specify an option
3292 -DTLSEXT_TYPE_opaque_prf_input=0x9527
3294 to the "config" or "Configure" script to enable the extension,
3295 assuming extension number 0x9527 (which is a completely arbitrary
3296 and unofficial assignment based on the MD5 hash of the Internet
3297 Draft). Note that by doing so, you potentially lose
3298 interoperability with other TLS implementations since these might
3299 be using the same extension number for other purposes.
3301 SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
3302 opaque PRF input value to use in the handshake. This will create
3303 an interal copy of the length-'len' string at 'src', and will
3304 return non-zero for success.
3306 To get more control and flexibility, provide a callback function
3309 SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
3310 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
3314 int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
3317 Callback function 'cb' will be called in handshakes, and is
3318 expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
3319 Argument 'arg' is for application purposes (the value as given to
3320 SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
3321 be provided to the callback function). The callback function
3322 has to return non-zero to report success: usually 1 to use opaque
3323 PRF input just if possible, or 2 to enforce use of the opaque PRF
3324 input. In the latter case, the library will abort the handshake
3325 if opaque PRF input is not successfully negotiated.
3327 Arguments 'peerinput' and 'len' given to the callback function
3328 will always be NULL and 0 in the case of a client. A server will
3329 see the client's opaque PRF input through these variables if
3330 available (NULL and 0 otherwise). Note that if the server
3331 provides an opaque PRF input, the length must be the same as the
3332 length of the client's opaque PRF input.
3334 Note that the callback function will only be called when creating
3335 a new session (session resumption can resume whatever was
3336 previously negotiated), and will not be called in SSL 2.0
3337 handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
3338 SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
3339 for applications that need to enforce opaque PRF input.
3343 *) Update ssl code to support digests other than SHA1+MD5 for handshake
3346 [Victor B. Wagner <vitus@cryptocom.ru>]
3348 *) Add RFC4507 support to OpenSSL. This includes the corrections in
3349 RFC4507bis. The encrypted ticket format is an encrypted encoded
3350 SSL_SESSION structure, that way new session features are automatically
3353 If a client application caches session in an SSL_SESSION structure
3354 support is transparent because tickets are now stored in the encoded
3357 The SSL_CTX structure automatically generates keys for ticket
3358 protection in servers so again support should be possible
3359 with no application modification.
3361 If a client or server wishes to disable RFC4507 support then the option
3362 SSL_OP_NO_TICKET can be set.
3364 Add a TLS extension debugging callback to allow the contents of any client
3365 or server extensions to be examined.
3367 This work was sponsored by Google.
3370 *) Final changes to avoid use of pointer pointer casts in OpenSSL.
3371 OpenSSL should now compile cleanly on gcc 4.2
3372 [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
3374 *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
3375 support including streaming MAC support: this is required for GOST
3376 ciphersuite support.
3377 [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
3379 *) Add option -stream to use PKCS#7 streaming in smime utility. New
3380 function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
3381 to output in BER and PEM format.
3384 *) Experimental support for use of HMAC via EVP_PKEY interface. This
3385 allows HMAC to be handled via the EVP_DigestSign*() interface. The
3386 EVP_PKEY "key" in this case is the HMAC key, potentially allowing
3387 ENGINE support for HMAC keys which are unextractable. New -mac and
3388 -macopt options to dgst utility.
3391 *) New option -sigopt to dgst utility. Update dgst to use
3392 EVP_Digest{Sign,Verify}*. These two changes make it possible to use
3393 alternative signing parameters such as X9.31 or PSS in the dgst
3397 *) Change ssl_cipher_apply_rule(), the internal function that does
3398 the work each time a ciphersuite string requests enabling
3399 ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
3400 removing ("!foo+bar") a class of ciphersuites: Now it maintains
3401 the order of disabled ciphersuites such that those ciphersuites
3402 that most recently went from enabled to disabled not only stay
3403 in order with respect to each other, but also have higher priority
3404 than other disabled ciphersuites the next time ciphersuites are
3407 This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
3408 the same ciphersuites as with "HIGH" alone, but in a specific
3409 order where the PSK ciphersuites come first (since they are the
3410 most recently disabled ciphersuites when "HIGH" is parsed).
3412 Also, change ssl_create_cipher_list() (using this new
3413 funcionality) such that between otherwise identical
3414 cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
3418 *) Change ssl_create_cipher_list() so that it automatically
3419 arranges the ciphersuites in reasonable order before starting
3420 to process the rule string. Thus, the definition for "DEFAULT"
3421 (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
3422 remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
3423 This makes it much easier to arrive at a reasonable default order
3424 in applications for which anonymous ciphers are OK (meaning
3425 that you can't actually use DEFAULT).
3426 [Bodo Moeller; suggested by Victor Duchovni]
3428 *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
3429 processing) into multiple integers instead of setting
3430 "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
3431 "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
3432 (These masks as well as the individual bit definitions are hidden
3433 away into the non-exported interface ssl/ssl_locl.h, so this
3434 change to the definition of the SSL_CIPHER structure shouldn't
3435 affect applications.) This give us more bits for each of these
3436 categories, so there is no longer a need to coagulate AES128 and
3437 AES256 into a single algorithm bit, and to coagulate Camellia128
3438 and Camellia256 into a single algorithm bit, which has led to all
3441 Thus, among other things, the kludge introduced in 0.9.7m and
3442 0.9.8e for masking out AES256 independently of AES128 or masking
3443 out Camellia256 independently of AES256 is not needed here in 0.9.9.
3445 With the change, we also introduce new ciphersuite aliases that
3446 so far were missing: "AES128", "AES256", "CAMELLIA128", and
3450 *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
3451 Use the leftmost N bytes of the signature input if the input is
3452 larger than the prime q (with N being the size in bytes of q).
3455 *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
3456 it yet and it is largely untested.
3459 *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
3462 *) Initial incomplete changes to avoid need for function casts in OpenSSL
3463 some compilers (gcc 4.2 and later) reject their use. Safestack is
3464 reimplemented. Update ASN1 to avoid use of legacy functions.
3467 *) Win32/64 targets are linked with Winsock2.
3470 *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
3471 to external functions. This can be used to increase CRL handling
3472 efficiency especially when CRLs are very large by (for example) storing
3473 the CRL revoked certificates in a database.
3476 *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
3477 new CRLs added to a directory can be used. New command line option
3478 -verify_return_error to s_client and s_server. This causes real errors
3479 to be returned by the verify callback instead of carrying on no matter
3480 what. This reflects the way a "real world" verify callback would behave.
3483 *) GOST engine, supporting several GOST algorithms and public key formats.
3484 Kindly donated by Cryptocom.
3487 *) Partial support for Issuing Distribution Point CRL extension. CRLs
3488 partitioned by DP are handled but no indirect CRL or reason partitioning
3489 (yet). Complete overhaul of CRL handling: now the most suitable CRL is
3490 selected via a scoring technique which handles IDP and AKID in CRLs.
3493 *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
3494 will ultimately be used for all verify operations: this will remove the
3495 X509_STORE dependency on certificate verification and allow alternative
3496 lookup methods. X509_STORE based implementations of these two callbacks.
3499 *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
3500 Modify get_crl() to find a valid (unexpired) CRL if possible.
3503 *) New function X509_CRL_match() to check if two CRLs are identical. Normally
3504 this would be called X509_CRL_cmp() but that name is already used by
3505 a function that just compares CRL issuer names. Cache several CRL
3506 extensions in X509_CRL structure and cache CRLDP in X509.
3509 *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
3510 this maps equivalent X509_NAME structures into a consistent structure.
3511 Name comparison can then be performed rapidly using memcmp().
3514 *) Non-blocking OCSP request processing. Add -timeout option to ocsp
3518 *) Allow digests to supply their own micalg string for S/MIME type using
3519 the ctrl EVP_MD_CTRL_MICALG.
3522 *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
3523 EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
3524 ctrl. It can then customise the structure before and/or after signing
3528 *) New function OBJ_add_sigid() to allow application defined signature OIDs
3529 to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
3530 to free up any added signature OIDs.
3533 *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
3534 EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
3535 digest and cipher tables. New options added to openssl utility:
3536 list-message-digest-algorithms and list-cipher-algorithms.
3539 *) Change the array representation of binary polynomials: the list
3540 of degrees of non-zero coefficients is now terminated with -1.
3541 Previously it was terminated with 0, which was also part of the
3542 value; thus, the array representation was not applicable to
3543 polynomials where t^0 has coefficient zero. This change makes
3544 the array representation useful in a more general context.
3547 *) Various modifications and fixes to SSL/TLS cipher string
3548 handling. For ECC, the code now distinguishes between fixed ECDH
3549 with RSA certificates on the one hand and with ECDSA certificates
3550 on the other hand, since these are separate ciphersuites. The
3551 unused code for Fortezza ciphersuites has been removed.
3553 For consistency with EDH, ephemeral ECDH is now called "EECDH"
3554 (not "ECDHE"). For consistency with the code for DH
3555 certificates, use of ECDH certificates is now considered ECDH
3556 authentication, not RSA or ECDSA authentication (the latter is
3557 merely the CA's signing algorithm and not actively used in the
3560 The temporary ciphersuite alias "ECCdraft" is no longer
3561 available, and ECC ciphersuites are no longer excluded from "ALL"
3562 and "DEFAULT". The following aliases now exist for RFC 4492
3563 ciphersuites, most of these by analogy with the DH case:
3565 kECDHr - ECDH cert, signed with RSA
3566 kECDHe - ECDH cert, signed with ECDSA
3567 kECDH - ECDH cert (signed with either RSA or ECDSA)
3568 kEECDH - ephemeral ECDH
3569 ECDH - ECDH cert or ephemeral ECDH
3575 AECDH - anonymous ECDH
3576 EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
3580 *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
3581 Use correct micalg parameters depending on digest(s) in signed message.
3584 *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
3585 an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
3588 *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
3589 an engine to register a method. Add ENGINE lookups for methods and
3590 functional reference processing.
3593 *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
3594 EVP_{Sign,Verify}* which allow an application to customise the signature
3598 *) New -resign option to smime utility. This adds one or more signers
3599 to an existing PKCS#7 signedData structure. Also -md option to use an
3600 alternative message digest algorithm for signing.
3603 *) Tidy up PKCS#7 routines and add new functions to make it easier to
3604 create PKCS7 structures containing multiple signers. Update smime
3605 application to support multiple signers.
3608 *) New -macalg option to pkcs12 utility to allow setting of an alternative
3612 *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
3613 Reorganize PBE internals to lookup from a static table using NIDs,
3614 add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
3615 EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
3616 PRF which will be automatically used with PBES2.
3619 *) Replace the algorithm specific calls to generate keys in "req" with the
3623 *) Update PKCS#7 enveloped data routines to use new API. This is now
3624 supported by any public key method supporting the encrypt operation. A
3625 ctrl is added to allow the public key algorithm to examine or modify
3626 the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
3630 *) Add a ctrl to asn1 method to allow a public key algorithm to express
3631 a default digest type to use. In most cases this will be SHA1 but some
3632 algorithms (such as GOST) need to specify an alternative digest. The
3633 return value indicates how strong the preference is 1 means optional and
3634 2 is mandatory (that is it is the only supported type). Modify
3635 ASN1_item_sign() to accept a NULL digest argument to indicate it should
3636 use the default md. Update openssl utilities to use the default digest
3637 type for signing if it is not explicitly indicated.
3640 *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
3641 EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
3642 signing method from the key type. This effectively removes the link
3643 between digests and public key types.
3646 *) Add an OID cross reference table and utility functions. Its purpose is to
3647 translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
3648 rsaEncryption. This will allow some of the algorithm specific hackery
3649 needed to use the correct OID to be removed.
3652 *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
3653 structures for PKCS7_sign(). They are now set up by the relevant public
3657 *) Add provisional EC pkey method with support for ECDSA and ECDH.
3660 *) Add support for key derivation (agreement) in the API, DH method and
3664 *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
3665 public and private key formats. As a side effect these add additional
3666 command line functionality not previously available: DSA signatures can be
3667 generated and verified using pkeyutl and DH key support and generation in
3672 [Oliver Tappe <zooey@hirschkaefer.de>]
3674 *) New make target "install_html_docs" installs HTML renditions of the
3676 [Oliver Tappe <zooey@hirschkaefer.de>]
3678 *) New utility "genpkey" this is analogous to "genrsa" etc except it can
3679 generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
3680 support key and parameter generation and add initial key generation
3681 functionality for RSA.
3684 *) Add functions for main EVP_PKEY_method operations. The undocumented
3685 functions EVP_PKEY_{encrypt,decrypt} have been renamed to
3686 EVP_PKEY_{encrypt,decrypt}_old.
3689 *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
3690 key API, doesn't do much yet.
3693 *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
3694 public key algorithms. New option to openssl utility:
3695 "list-public-key-algorithms" to print out info.
3698 *) Implement the Supported Elliptic Curves Extension for
3699 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
3702 *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
3703 EVP_CIPHER structures to avoid later problems in EVP_cleanup().
3706 *) New utilities pkey and pkeyparam. These are similar to algorithm specific
3707 utilities such as rsa, dsa, dsaparam etc except they process any key
3711 *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
3712 functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
3713 EVP_PKEY_print_param() to print public key data from an EVP_PKEY
3717 *) Initial support for pluggable public key ASN1.
3718 De-spaghettify the public key ASN1 handling. Move public and private
3719 key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
3720 algorithm specific handling to a single module within the relevant
3721 algorithm directory. Add functions to allow (near) opaque processing
3722 of public and private key structures.
3725 *) Implement the Supported Point Formats Extension for
3726 ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
3729 *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
3730 for the psk identity [hint] and the psk callback functions to the
3731 SSL_SESSION, SSL and SSL_CTX structure.
3734 PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
3738 SSL_CTX_use_psk_identity_hint
3739 SSL_get_psk_identity_hint
3740 SSL_get_psk_identity
3741 SSL_use_psk_identity_hint
3743 [Mika Kousa and Pasi Eronen of Nokia Corporation]
3745 *) Add RFC 3161 compliant time stamp request creation, response generation
3746 and response verification functionality.
3747 [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
3749 *) Add initial support for TLS extensions, specifically for the server_name
3750 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
3751 have new members for a host name. The SSL data structure has an
3752 additional member SSL_CTX *initial_ctx so that new sessions can be
3753 stored in that context to allow for session resumption, even after the
3754 SSL has been switched to a new SSL_CTX in reaction to a client's
3755 server_name extension.
3757 New functions (subject to change):
3759 SSL_get_servername()
3760 SSL_get_servername_type()
3763 New CTRL codes and macros (subject to change):
3765 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
3766 - SSL_CTX_set_tlsext_servername_callback()
3767 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
3768 - SSL_CTX_set_tlsext_servername_arg()
3769 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
3771 openssl s_client has a new '-servername ...' option.
3773 openssl s_server has new options '-servername_host ...', '-cert2 ...',
3774 '-key2 ...', '-servername_fatal' (subject to change). This allows
3775 testing the HostName extension for a specific single host name ('-cert'
3776 and '-key' remain fallbacks for handshakes without HostName
3777 negotiation). If the unrecognized_name alert has to be sent, this by
3778 default is a warning; it becomes fatal with the '-servername_fatal'
3781 [Peter Sylvester, Remy Allais, Christophe Renou]
3783 *) Whirlpool hash implementation is added.
3786 *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
3787 bn(64,32). Because of instruction set limitations it doesn't have
3788 any negative impact on performance. This was done mostly in order
3789 to make it possible to share assembler modules, such as bn_mul_mont
3790 implementations, between 32- and 64-bit builds without hassle.
3793 *) Move code previously exiled into file crypto/ec/ec2_smpt.c
3794 to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
3798 *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
3799 dedicated Montgomery multiplication procedure, is introduced.
3800 BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
3801 "64-bit" performance on certain 32-bit targets.
3804 *) New option SSL_OP_NO_COMP to disable use of compression selectively
3805 in SSL structures. New SSL ctrl to set maximum send fragment size.
3806 Save memory by seeting the I/O buffer sizes dynamically instead of
3807 using the maximum available value.
3810 *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
3811 in addition to the text details.
3814 *) Very, very preliminary EXPERIMENTAL support for printing of general
3815 ASN1 structures. This currently produces rather ugly output and doesn't
3816 handle several customised structures at all.
3819 *) Integrated support for PVK file format and some related formats such
3820 as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
3821 these in the 'rsa' and 'dsa' utilities.
3824 *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
3827 *) Remove the ancient ASN1_METHOD code. This was only ever used in one
3828 place for the (very old) "NETSCAPE" format certificates which are now
3829 handled using new ASN1 code equivalents.
3832 *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
3833 pointer and make the SSL_METHOD parameter in SSL_CTX_new,
3834 SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
3837 *) Modify CRL distribution points extension code to print out previously
3838 unsupported fields. Enhance extension setting code to allow setting of
3842 *) Add print and set support for Issuing Distribution Point CRL extension.
3845 *) Change 'Configure' script to enable Camellia by default.
3848 Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
3850 *) When rejecting SSL/TLS records due to an incorrect version number, never
3851 update s->server with a new major version number. As of
3852 - OpenSSL 0.9.8m if 'short' is a 16-bit type,
3853 - OpenSSL 0.9.8f if 'short' is longer than 16 bits,
3854 the previous behavior could result in a read attempt at NULL when
3855 receiving specific incorrect SSL/TLS records once record payload
3856 protection is active. (CVE-2010-0740)
3857 [Bodo Moeller, Adam Langley <agl@chromium.org>]
3859 *) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
3860 could be crashed if the relevant tables were not present (e.g. chrooted).
3861 [Tomas Hoger <thoger@redhat.com>]
3863 Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
3865 *) Always check bn_wexpend() return values for failure. (CVE-2009-3245)
3866 [Martin Olsson, Neel Mehta]
3868 *) Fix X509_STORE locking: Every 'objs' access requires a lock (to
3869 accommodate for stack sorting, always a write lock!).
3872 *) On some versions of WIN32 Heap32Next is very slow. This can cause
3873 excessive delays in the RAND_poll(): over a minute. As a workaround
3874 include a time check in the inner Heap32Next loop too.
3877 *) The code that handled flushing of data in SSL/TLS originally used the
3878 BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
3879 the problem outlined in PR#1949. The fix suggested there however can
3880 trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
3881 of Apache). So instead simplify the code to flush unconditionally.
3882 This should be fine since flushing with no data to flush is a no op.
3885 *) Handle TLS versions 2.0 and later properly and correctly use the
3886 highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
3887 off ancient servers have a habit of sticking around for a while...
3890 *) Modify compression code so it frees up structures without using the
3891 ex_data callbacks. This works around a problem where some applications
3892 call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
3893 restarting) then use compression (e.g. SSL with compression) later.
3894 This results in significant per-connection memory leaks and
3895 has caused some security issues including CVE-2008-1678 and
3899 *) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
3900 change when encrypting or decrypting.
3903 *) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
3904 connect and renegotiate with servers which do not support RI.
3905 Until RI is more widely deployed this option is enabled by default.
3908 *) Add "missing" ssl ctrls to clear options and mode.
3911 *) If client attempts to renegotiate and doesn't support RI respond with
3912 a no_renegotiation alert as required by RFC5746. Some renegotiating
3913 TLS clients will continue a connection gracefully when they receive
3914 the alert. Unfortunately OpenSSL mishandled this alert and would hang
3915 waiting for a server hello which it will never receive. Now we treat a
3916 received no_renegotiation alert as a fatal error. This is because
3917 applications requesting a renegotiation might well expect it to succeed
3918 and would have no code in place to handle the server denying it so the
3919 only safe thing to do is to terminate the connection.
3922 *) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
3923 peer supports secure renegotiation and 0 otherwise. Print out peer
3924 renegotiation support in s_client/s_server.
3927 *) Replace the highly broken and deprecated SPKAC certification method with
3928 the updated NID creation version. This should correctly handle UTF8.
3931 *) Implement RFC5746. Re-enable renegotiation but require the extension
3932 as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
3933 turns out to be a bad idea. It has been replaced by
3934 SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
3935 SSL_CTX_set_options(). This is really not recommended unless you
3936 know what you are doing.
3937 [Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
3939 *) Fixes to stateless session resumption handling. Use initial_ctx when
3940 issuing and attempting to decrypt tickets in case it has changed during
3941 servername handling. Use a non-zero length session ID when attempting
3942 stateless session resumption: this makes it possible to determine if
3943 a resumption has occurred immediately after receiving server hello
3944 (several places in OpenSSL subtly assume this) instead of later in
3948 *) The functions ENGINE_ctrl(), OPENSSL_isservice(),
3949 CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
3950 fixes for a few places where the return code is not checked
3952 [Julia Lawall <julia@diku.dk>]
3954 *) Add --strict-warnings option to Configure script to include devteam
3955 warnings in other configurations.
3958 *) Add support for --libdir option and LIBDIR variable in makefiles. This
3959 makes it possible to install openssl libraries in locations which
3960 have names other than "lib", for example "/usr/lib64" which some
3962 [Steve Henson, based on patch from Jeremy Utley]
3964 *) Don't allow the use of leading 0x80 in OIDs. This is a violation of
3965 X690 8.9.12 and can produce some misleading textual output of OIDs.
3966 [Steve Henson, reported by Dan Kaminsky]
3968 *) Delete MD2 from algorithm tables. This follows the recommendation in
3969 several standards that it is not used in new applications due to
3970 several cryptographic weaknesses. For binary compatibility reasons
3971 the MD2 API is still compiled in by default.
3974 *) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
3978 *) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
3979 OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
3981 [Guenter <lists@gknw.net>]
3983 *) Fix the server certificate chain building code to use X509_verify_cert(),
3984 it used to have an ad-hoc builder which was unable to cope with anything
3985 other than a simple chain.
3986 [David Woodhouse <dwmw2@infradead.org>, Steve Henson]
3988 *) Don't check self signed certificate signatures in X509_verify_cert()
3989 by default (a flag can override this): it just wastes time without
3990 adding any security. As a useful side effect self signed root CAs
3991 with non-FIPS digests are now usable in FIPS mode.
3994 *) In dtls1_process_out_of_seq_message() the check if the current message
3995 is already buffered was missing. For every new message was memory
3996 allocated, allowing an attacker to perform an denial of service attack
3997 with sending out of seq handshake messages until there is no memory
3998 left. Additionally every future messege was buffered, even if the
3999 sequence number made no sense and would be part of another handshake.
4000 So only messages with sequence numbers less than 10 in advance will be
4001 buffered. (CVE-2009-1378)
4002 [Robin Seggelmann, discovered by Daniel Mentz]
4004 *) Records are buffered if they arrive with a future epoch to be
4005 processed after finishing the corresponding handshake. There is
4006 currently no limitation to this buffer allowing an attacker to perform
4007 a DOS attack with sending records with future epochs until there is no
4008 memory left. This patch adds the pqueue_size() function to determine
4009 the size of a buffer and limits the record buffer to 100 entries.
4011 [Robin Seggelmann, discovered by Daniel Mentz]
4013 *) Keep a copy of frag->msg_header.frag_len so it can be used after the
4014 parent structure is freed. (CVE-2009-1379)
4017 *) Handle non-blocking I/O properly in SSL_shutdown() call.
4018 [Darryl Miles <darryl-mailinglists@netbauds.net>]
4021 [Ilya O. <vrghost@gmail.com>]
4023 Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
4025 *) Disable renegotiation completely - this fixes a severe security
4026 problem (CVE-2009-3555) at the cost of breaking all
4027 renegotiation. Renegotiation can be re-enabled by setting
4028 SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
4029 run-time. This is really not recommended unless you know what
4033 Changes between 0.9.8j and 0.9.8k [25 Mar 2009]
4035 *) Don't set val to NULL when freeing up structures, it is freed up by
4036 underlying code. If sizeof(void *) > sizeof(long) this can result in
4037 zeroing past the valid field. (CVE-2009-0789)
4038 [Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
4040 *) Fix bug where return value of CMS_SignerInfo_verify_content() was not
4041 checked correctly. This would allow some invalid signed attributes to
4042 appear to verify correctly. (CVE-2009-0591)
4043 [Ivan Nestlerode <inestlerode@us.ibm.com>]
4045 *) Reject UniversalString and BMPString types with invalid lengths. This
4046 prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
4047 a legal length. (CVE-2009-0590)
4050 *) Set S/MIME signing as the default purpose rather than setting it
4051 unconditionally. This allows applications to override it at the store
4055 *) Permit restricted recursion of ASN1 strings. This is needed in practice
4056 to handle some structures.
4059 *) Improve efficiency of mem_gets: don't search whole buffer each time
4061 [Jeremy Shapiro <jnshapir@us.ibm.com>]
4063 *) New -hex option for openssl rand.
4066 *) Print out UTF8String and NumericString when parsing ASN1.
4069 *) Support NumericString type for name components.
4072 *) Allow CC in the environment to override the automatically chosen
4073 compiler. Note that nothing is done to ensure flags work with the
4077 Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
4079 *) Properly check EVP_VerifyFinal() and similar return values
4081 [Ben Laurie, Bodo Moeller, Google Security Team]
4083 *) Enable TLS extensions by default.
4086 *) Allow the CHIL engine to be loaded, whether the application is
4087 multithreaded or not. (This does not release the developer from the
4088 obligation to set up the dynamic locking callbacks.)
4089 [Sander Temme <sander@temme.net>]
4091 *) Use correct exit code if there is an error in dgst command.
4092 [Steve Henson; problem pointed out by Roland Dirlewanger]
4094 *) Tweak Configure so that you need to say "experimental-jpake" to enable
4095 JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
4098 *) Add experimental JPAKE support, including demo authentication in
4099 s_client and s_server.
4102 *) Set the comparison function in v3_addr_canonize().
4103 [Rob Austein <sra@hactrn.net>]
4105 *) Add support for XMPP STARTTLS in s_client.
4106 [Philip Paeps <philip@freebsd.org>]
4108 *) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
4109 to ensure that even with this option, only ciphersuites in the
4110 server's preference list will be accepted. (Note that the option
4111 applies only when resuming a session, so the earlier behavior was
4112 just about the algorithm choice for symmetric cryptography.)
4115 Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
4117 *) Fix NULL pointer dereference if a DTLS server received
4118 ChangeCipherSpec as first record (CVE-2009-1386).
4121 *) Fix a state transition in s3_srvr.c and d1_srvr.c
4122 (was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
4125 *) The fix in 0.9.8c that supposedly got rid of unsafe
4126 double-checked locking was incomplete for RSA blinding,
4127 addressing just one layer of what turns out to have been
4128 doubly unsafe triple-checked locking.
4130 So now fix this for real by retiring the MONT_HELPER macro
4131 in crypto/rsa/rsa_eay.c.
4133 [Bodo Moeller; problem pointed out by Marius Schilder]
4135 *) Various precautionary measures:
4137 - Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
4139 - Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
4140 (NB: This would require knowledge of the secret session ticket key
4141 to exploit, in which case you'd be SOL either way.)
4143 - Change bn_nist.c so that it will properly handle input BIGNUMs
4144 outside the expected range.
4146 - Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
4149 [Neel Mehta, Bodo Moeller]
4151 *) Allow engines to be "soft loaded" - i.e. optionally don't die if
4152 the load fails. Useful for distros.
4153 [Ben Laurie and the FreeBSD team]
4155 *) Add support for Local Machine Keyset attribute in PKCS#12 files.
4158 *) Fix BN_GF2m_mod_arr() top-bit cleanup code.
4161 *) Expand ENGINE to support engine supplied SSL client certificate functions.
4163 This work was sponsored by Logica.
4166 *) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
4167 keystores. Support for SSL/TLS client authentication too.
4168 Not compiled unless enable-capieng specified to Configure.
4170 This work was sponsored by Logica.
4173 *) Fix bug in X509_ATTRIBUTE creation: don't set attribute using
4174 ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
4175 attribute creation routines such as certificate requests and PKCS#12
4179 Changes between 0.9.8g and 0.9.8h [28 May 2008]
4181 *) Fix flaw if 'Server Key exchange message' is omitted from a TLS
4182 handshake which could lead to a cilent crash as found using the
4183 Codenomicon TLS test suite (CVE-2008-1672)
4184 [Steve Henson, Mark Cox]
4186 *) Fix double free in TLS server name extensions which could lead to
4187 a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
4190 *) Clear error queue in SSL_CTX_use_certificate_chain_file()
4192 Clear the error queue to ensure that error entries left from
4193 older function calls do not interfere with the correct operation.
4194 [Lutz Jaenicke, Erik de Castro Lopo]
4196 *) Remove root CA certificates of commercial CAs:
4198 The OpenSSL project does not recommend any specific CA and does not
4199 have any policy with respect to including or excluding any CA.
4200 Therefore it does not make any sense to ship an arbitrary selection
4201 of root CA certificates with the OpenSSL software.
4204 *) RSA OAEP patches to fix two separate invalid memory reads.
4205 The first one involves inputs when 'lzero' is greater than
4206 'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
4207 before the beginning of from). The second one involves inputs where
4208 the 'db' section contains nothing but zeroes (there is a one-byte
4209 invalid read after the end of 'db').
4210 [Ivan Nestlerode <inestlerode@us.ibm.com>]
4212 *) Partial backport from 0.9.9-dev:
4214 Introduce bn_mul_mont (dedicated Montgomery multiplication
4215 procedure) as a candidate for BIGNUM assembler implementation.
4216 While 0.9.9-dev uses assembler for various architectures, only
4217 x86_64 is available by default here in the 0.9.8 branch, and
4218 32-bit x86 is available through a compile-time setting.
4220 To try the 32-bit x86 assembler implementation, use Configure
4221 option "enable-montasm" (which exists only for this backport).
4223 As "enable-montasm" for 32-bit x86 disclaims code stability
4224 anyway, in this constellation we activate additional code
4225 backported from 0.9.9-dev for further performance improvements,
4226 namely BN_from_montgomery_word. (To enable this otherwise,
4227 e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
4229 [Andy Polyakov (backport partially by Bodo Moeller)]
4231 *) Add TLS session ticket callback. This allows an application to set
4232 TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
4233 values. This is useful for key rollover for example where several key
4234 sets may exist with different names.
4237 *) Reverse ENGINE-internal logic for caching default ENGINE handles.
4238 This was broken until now in 0.9.8 releases, such that the only way
4239 a registered ENGINE could be used (assuming it initialises
4240 successfully on the host) was to explicitly set it as the default
4241 for the relevant algorithms. This is in contradiction with 0.9.7
4242 behaviour and the documentation. With this fix, when an ENGINE is
4243 registered into a given algorithm's table of implementations, the
4244 'uptodate' flag is reset so that auto-discovery will be used next
4245 time a new context for that algorithm attempts to select an
4247 [Ian Lister (tweaked by Geoff Thorpe)]
4249 *) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
4250 implementation in the following ways:
4252 Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
4255 Lack of BER streaming support means one pass streaming processing is
4256 only supported if data is detached: setting the streaming flag is
4257 ignored for embedded content.
4259 CMS support is disabled by default and must be explicitly enabled
4260 with the enable-cms configuration option.
4263 *) Update the GMP engine glue to do direct copies between BIGNUM and
4264 mpz_t when openssl and GMP use the same limb size. Otherwise the
4265 existing "conversion via a text string export" trick is still used.
4266 [Paul Sheer <paulsheer@gmail.com>]
4268 *) Zlib compression BIO. This is a filter BIO which compressed and
4269 uncompresses any data passed through it.
4272 *) Add AES_wrap_key() and AES_unwrap_key() functions to implement
4273 RFC3394 compatible AES key wrapping.
4276 *) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
4277 sets string data without copying. X509_ALGOR_set0() and
4278 X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
4279 data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
4280 from an X509_ATTRIBUTE structure optionally checking it occurs only
4281 once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
4285 *) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
4286 to get the expected BN_FLG_CONSTTIME behavior.
4287 [Bodo Moeller (Google)]
4291 - fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
4292 - fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
4293 - added some more tests to do_tests.pl
4294 - fixed RunningProcess usage so that it works with newer LIBC NDKs too
4295 - removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
4296 - added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
4297 netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
4298 - various changes to netware.pl to enable gcc-cross builds on Win32
4300 - changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
4301 - various changes to fix missing prototype warnings
4302 - fixed x86nasm.pl to create correct asm files for NASM COFF output
4303 - added AES, WHIRLPOOL and CPUID assembler code to build files
4304 - added missing AES assembler make rules to mk1mf.pl
4305 - fixed order of includes in apps/ocsp.c so that e_os.h settings apply
4306 [Guenter Knauf <eflash@gmx.net>]
4308 *) Implement certificate status request TLS extension defined in RFC3546.
4309 A client can set the appropriate parameters and receive the encoded
4310 OCSP response via a callback. A server can query the supplied parameters
4311 and set the encoded OCSP response in the callback. Add simplified examples
4312 to s_client and s_server.
4315 Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
4317 *) Fix various bugs:
4318 + Binary incompatibility of ssl_ctx_st structure
4319 + DTLS interoperation with non-compliant servers
4320 + Don't call get_session_cb() without proposed session
4321 + Fix ia64 assembler code
4322 [Andy Polyakov, Steve Henson]
4324 Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
4326 *) DTLS Handshake overhaul. There were longstanding issues with
4327 OpenSSL DTLS implementation, which were making it impossible for
4328 RFC 4347 compliant client to communicate with OpenSSL server.
4329 Unfortunately just fixing these incompatibilities would "cut off"
4330 pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
4331 server keeps tolerating non RFC compliant syntax. The opposite is
4332 not true, 0.9.8f client can not communicate with earlier server.
4333 This update even addresses CVE-2007-4995.
4336 *) Changes to avoid need for function casts in OpenSSL: some compilers
4337 (gcc 4.2 and later) reject their use.
4338 [Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
4341 *) Add RFC4507 support to OpenSSL. This includes the corrections in
4342 RFC4507bis. The encrypted ticket format is an encrypted encoded
4343 SSL_SESSION structure, that way new session features are automatically
4346 If a client application caches session in an SSL_SESSION structure
4347 support is transparent because tickets are now stored in the encoded
4350 The SSL_CTX structure automatically generates keys for ticket
4351 protection in servers so again support should be possible
4352 with no application modification.
4354 If a client or server wishes to disable RFC4507 support then the option
4355 SSL_OP_NO_TICKET can be set.
4357 Add a TLS extension debugging callback to allow the contents of any client
4358 or server extensions to be examined.
4360 This work was sponsored by Google.
4363 *) Add initial support for TLS extensions, specifically for the server_name
4364 extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
4365 have new members for a host name. The SSL data structure has an
4366 additional member SSL_CTX *initial_ctx so that new sessions can be
4367 stored in that context to allow for session resumption, even after the
4368 SSL has been switched to a new SSL_CTX in reaction to a client's
4369 server_name extension.
4371 New functions (subject to change):
4373 SSL_get_servername()
4374 SSL_get_servername_type()
4377 New CTRL codes and macros (subject to change):
4379 SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
4380 - SSL_CTX_set_tlsext_servername_callback()
4381 SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
4382 - SSL_CTX_set_tlsext_servername_arg()
4383 SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
4385 openssl s_client has a new '-servername ...' option.
4387 openssl s_server has new options '-servername_host ...', '-cert2 ...',
4388 '-key2 ...', '-servername_fatal' (subject to change). This allows
4389 testing the HostName extension for a specific single host name ('-cert'
4390 and '-key' remain fallbacks for handshakes without HostName
4391 negotiation). If the unrecognized_name alert has to be sent, this by
4392 default is a warning; it becomes fatal with the '-servername_fatal'
4395 [Peter Sylvester, Remy Allais, Christophe Renou, Steve Henson]
4397 *) Add AES and SSE2 assembly language support to VC++ build.
4400 *) Mitigate attack on final subtraction in Montgomery reduction.
4403 *) Fix crypto/ec/ec_mult.c to work properly with scalars of value 0
4404 (which previously caused an internal error).
4407 *) Squeeze another 10% out of IGE mode when in != out.
4410 *) AES IGE mode speedup.
4411 [Dean Gaudet (Google)]
4413 *) Add the Korean symmetric 128-bit cipher SEED (see
4414 http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp) and
4415 add SEED ciphersuites from RFC 4162:
4417 TLS_RSA_WITH_SEED_CBC_SHA = "SEED-SHA"
4418 TLS_DHE_DSS_WITH_SEED_CBC_SHA = "DHE-DSS-SEED-SHA"
4419 TLS_DHE_RSA_WITH_SEED_CBC_SHA = "DHE-RSA-SEED-SHA"
4420 TLS_DH_anon_WITH_SEED_CBC_SHA = "ADH-SEED-SHA"
4422 To minimize changes between patchlevels in the OpenSSL 0.9.8
4423 series, SEED remains excluded from compilation unless OpenSSL
4424 is configured with 'enable-seed'.
4425 [KISA, Bodo Moeller]
4427 *) Mitigate branch prediction attacks, which can be practical if a
4428 single processor is shared, allowing a spy process to extract
4429 information. For detailed background information, see
4430 http://eprint.iacr.org/2007/039 (O. Aciicmez, S. Gueron,
4431 J.-P. Seifert, "New Branch Prediction Vulnerabilities in OpenSSL
4432 and Necessary Software Countermeasures"). The core of the change
4433 are new versions BN_div_no_branch() and
4434 BN_mod_inverse_no_branch() of BN_div() and BN_mod_inverse(),
4435 respectively, which are slower, but avoid the security-relevant
4436 conditional branches. These are automatically called by BN_div()
4437 and BN_mod_inverse() if the flag BN_FLG_CONSTTIME is set for one
4438 of the input BIGNUMs. Also, BN_is_bit_set() has been changed to
4439 remove a conditional branch.
4441 BN_FLG_CONSTTIME is the new name for the previous
4442 BN_FLG_EXP_CONSTTIME flag, since it now affects more than just
4443 modular exponentiation. (Since OpenSSL 0.9.7h, setting this flag
4444 in the exponent causes BN_mod_exp_mont() to use the alternative
4445 implementation in BN_mod_exp_mont_consttime().) The old name
4446 remains as a deprecated alias.
4448 Similarly, RSA_FLAG_NO_EXP_CONSTTIME is replaced by a more general
4449 RSA_FLAG_NO_CONSTTIME flag since the RSA implementation now uses
4450 constant-time implementations for more than just exponentiation.
4451 Here too the old name is kept as a deprecated alias.
4453 BN_BLINDING_new() will now use BN_dup() for the modulus so that
4454 the BN_BLINDING structure gets an independent copy of the
4455 modulus. This means that the previous "BIGNUM *m" argument to
4456 BN_BLINDING_new() and to BN_BLINDING_create_param() now
4457 essentially becomes "const BIGNUM *m", although we can't actually
4458 change this in the header file before 0.9.9. It allows
4459 RSA_setup_blinding() to use BN_with_flags() on the modulus to
4460 enable BN_FLG_CONSTTIME.
4462 [Matthew D Wood (Intel Corp)]
4464 *) In the SSL/TLS server implementation, be strict about session ID
4465 context matching (which matters if an application uses a single
4466 external cache for different purposes). Previously,
4467 out-of-context reuse was forbidden only if SSL_VERIFY_PEER was
4468 set. This did ensure strict client verification, but meant that,
4469 with applications using a single external cache for quite
4470 different requirements, clients could circumvent ciphersuite
4471 restrictions for a given session ID context by starting a session
4472 in a different context.
4475 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
4476 a ciphersuite string such as "DEFAULT:RSA" cannot enable
4477 authentication-only ciphersuites.
4480 *) Update the SSL_get_shared_ciphers() fix CVE-2006-3738 which was
4481 not complete and could lead to a possible single byte overflow
4482 (CVE-2007-5135) [Ben Laurie]
4484 Changes between 0.9.8d and 0.9.8e [23 Feb 2007]
4486 *) Since AES128 and AES256 (and similarly Camellia128 and
4487 Camellia256) share a single mask bit in the logic of
4488 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
4489 kludge to work properly if AES128 is available and AES256 isn't
4490 (or if Camellia128 is available and Camellia256 isn't).
4493 *) Fix the BIT STRING encoding generated by crypto/ec/ec_asn1.c
4494 (within i2d_ECPrivateKey, i2d_ECPKParameters, i2d_ECParameters):
4495 When a point or a seed is encoded in a BIT STRING, we need to
4496 prevent the removal of trailing zero bits to get the proper DER
4497 encoding. (By default, crypto/asn1/a_bitstr.c assumes the case
4498 of a NamedBitList, for which trailing 0 bits need to be removed.)
4501 *) Have SSL/TLS server implementation tolerate "mismatched" record
4502 protocol version while receiving ClientHello even if the
4503 ClientHello is fragmented. (The server can't insist on the
4504 particular protocol version it has chosen before the ServerHello
4505 message has informed the client about his choice.)
4508 *) Add RFC 3779 support.
4509 [Rob Austein for ARIN, Ben Laurie]
4511 *) Load error codes if they are not already present instead of using a
4512 static variable. This allows them to be cleanly unloaded and reloaded.
4513 Improve header file function name parsing.
4516 *) extend SMTP and IMAP protocol emulation in s_client to use EHLO
4517 or CAPABILITY handshake as required by RFCs.
4520 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
4522 *) Introduce limits to prevent malicious keys being able to
4523 cause a denial of service. (CVE-2006-2940)
4524 [Steve Henson, Bodo Moeller]
4526 *) Fix ASN.1 parsing of certain invalid structures that can result
4527 in a denial of service. (CVE-2006-2937) [Steve Henson]
4529 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
4530 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
4532 *) Fix SSL client code which could crash if connecting to a
4533 malicious SSLv2 server. (CVE-2006-4343)
4534 [Tavis Ormandy and Will Drewry, Google Security Team]
4536 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
4537 match only those. Before that, "AES256-SHA" would be interpreted
4538 as a pattern and match "AES128-SHA" too (since AES128-SHA got
4539 the same strength classification in 0.9.7h) as we currently only
4540 have a single AES bit in the ciphersuite description bitmap.
4541 That change, however, also applied to ciphersuite strings such as
4542 "RC4-MD5" that intentionally matched multiple ciphersuites --
4543 namely, SSL 2.0 ciphersuites in addition to the more common ones
4544 from SSL 3.0/TLS 1.0.
4546 So we change the selection algorithm again: Naming an explicit
4547 ciphersuite selects this one ciphersuite, and any other similar
4548 ciphersuite (same bitmap) from *other* protocol versions.
4549 Thus, "RC4-MD5" again will properly select both the SSL 2.0
4550 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
4552 Since SSL 2.0 does not have any ciphersuites for which the
4553 128/256 bit distinction would be relevant, this works for now.
4554 The proper fix will be to use different bits for AES128 and
4555 AES256, which would have avoided the problems from the beginning;
4556 however, bits are scarce, so we can only do this in a new release
4557 (not just a patchlevel) when we can change the SSL_CIPHER
4558 definition to split the single 'unsigned long mask' bitmap into
4559 multiple values to extend the available space.
4563 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
4565 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
4566 (CVE-2006-4339) [Ben Laurie and Google Security Team]
4568 *) Add AES IGE and biIGE modes.
4571 *) Change the Unix randomness entropy gathering to use poll() when
4572 possible instead of select(), since the latter has some
4573 undesirable limitations.
4574 [Darryl Miles via Richard Levitte and Bodo Moeller]
4576 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
4577 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
4578 cannot be implicitly activated as part of, e.g., the "AES" alias.
4579 However, please upgrade to OpenSSL 0.9.9[-dev] for
4580 non-experimental use of the ECC ciphersuites to get TLS extension
4581 support, which is required for curve and point format negotiation
4582 to avoid potential handshake problems.
4585 *) Disable rogue ciphersuites:
4587 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
4588 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
4589 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
4591 The latter two were purportedly from
4592 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
4595 Also deactivate the remaining ciphersuites from
4596 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
4597 unofficial, and the ID has long expired.
4600 *) Fix RSA blinding Heisenbug (problems sometimes occurred on
4601 dual-core machines) and other potential thread-safety issues.
4604 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
4605 versions), which is now available for royalty-free use
4606 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
4607 Also, add Camellia TLS ciphersuites from RFC 4132.
4609 To minimize changes between patchlevels in the OpenSSL 0.9.8
4610 series, Camellia remains excluded from compilation unless OpenSSL
4611 is configured with 'enable-camellia'.
4614 *) Disable the padding bug check when compression is in use. The padding
4615 bug check assumes the first packet is of even length, this is not
4616 necessarily true if compresssion is enabled and can result in false
4617 positives causing handshake failure. The actual bug test is ancient
4618 code so it is hoped that implementations will either have fixed it by
4619 now or any which still have the bug do not support compression.
4622 Changes between 0.9.8a and 0.9.8b [04 May 2006]
4624 *) When applying a cipher rule check to see if string match is an explicit
4625 cipher suite and only match that one cipher suite if it is.
4628 *) Link in manifests for VC++ if needed.
4629 [Austin Ziegler <halostatue@gmail.com>]
4631 *) Update support for ECC-based TLS ciphersuites according to
4632 draft-ietf-tls-ecc-12.txt with proposed changes (but without
4633 TLS extensions, which are supported starting with the 0.9.9
4634 branch, not in the OpenSSL 0.9.8 branch).
4637 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
4638 opaque EVP_CIPHER_CTX handling.
4641 *) Fixes and enhancements to zlib compression code. We now only use
4642 "zlib1.dll" and use the default __cdecl calling convention on Win32
4643 to conform with the standards mentioned here:
4644 http://www.zlib.net/DLL_FAQ.txt
4645 Static zlib linking now works on Windows and the new --with-zlib-include
4646 --with-zlib-lib options to Configure can be used to supply the location
4647 of the headers and library. Gracefully handle case where zlib library
4651 *) Several fixes and enhancements to the OID generation code. The old code
4652 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
4653 handle numbers larger than ULONG_MAX, truncated printing and had a
4654 non standard OBJ_obj2txt() behaviour.
4657 *) Add support for building of engines under engine/ as shared libraries
4658 under VC++ build system.
4661 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
4662 Hopefully, we will not see any false combination of paths any more.
4665 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
4667 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
4668 (part of SSL_OP_ALL). This option used to disable the
4669 countermeasure against man-in-the-middle protocol-version
4670 rollback in the SSL 2.0 server implementation, which is a bad
4671 idea. (CVE-2005-2969)
4673 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
4674 for Information Security, National Institute of Advanced Industrial
4675 Science and Technology [AIST], Japan)]
4677 *) Add two function to clear and return the verify parameter flags.
4680 *) Keep cipherlists sorted in the source instead of sorting them at
4681 runtime, thus removing the need for a lock.
4684 *) Avoid some small subgroup attacks in Diffie-Hellman.
4685 [Nick Mathewson and Ben Laurie]
4687 *) Add functions for well-known primes.
4690 *) Extended Windows CE support.
4691 [Satoshi Nakamura and Andy Polyakov]
4693 *) Initialize SSL_METHOD structures at compile time instead of during
4694 runtime, thus removing the need for a lock.
4697 *) Make PKCS7_decrypt() work even if no certificate is supplied by
4698 attempting to decrypt each encrypted key in turn. Add support to
4702 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
4704 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
4707 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
4710 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
4711 key into the same file any more.
4714 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
4717 *) Add -utf8 command line and config file option to 'ca'.
4718 [Stefan <stf@udoma.org]
4720 *) Removed the macro des_crypt(), as it seems to conflict with some
4721 libraries. Use DES_crypt().
4724 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
4725 involves renaming the source and generated shared-libs for
4726 both. The engines will accept the corrected or legacy ids
4727 ('ncipher' and '4758_cca' respectively) when binding. NB,
4728 this only applies when building 'shared'.
4729 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
4731 *) Add attribute functions to EVP_PKEY structure. Modify
4732 PKCS12_create() to recognize a CSP name attribute and
4733 use it. Make -CSP option work again in pkcs12 utility.
4736 *) Add new functionality to the bn blinding code:
4737 - automatic re-creation of the BN_BLINDING parameters after
4738 a fixed number of uses (currently 32)
4739 - add new function for parameter creation
4740 - introduce flags to control the update behaviour of the
4741 BN_BLINDING parameters
4742 - hide BN_BLINDING structure
4743 Add a second BN_BLINDING slot to the RSA structure to improve
4744 performance when a single RSA object is shared among several
4748 *) Add support for DTLS.
4749 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
4751 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
4752 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
4755 *) Remove buggy and incomplete DH cert support from
4756 ssl/ssl_rsa.c and ssl/s3_both.c
4759 *) Use SHA-1 instead of MD5 as the default digest algorithm for
4760 the apps/openssl applications.
4763 *) Compile clean with "-Wall -Wmissing-prototypes
4764 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
4765 DEBUG_SAFESTACK must also be set.
4768 *) Change ./Configure so that certain algorithms can be disabled by default.
4769 The new counterpiece to "no-xxx" is "enable-xxx".
4771 The patented RC5 and MDC2 algorithms will now be disabled unless
4772 "enable-rc5" and "enable-mdc2", respectively, are specified.
4774 (IDEA remains enabled despite being patented. This is because IDEA
4775 is frequently required for interoperability, and there is no license
4776 fee for non-commercial use. As before, "no-idea" can be used to
4777 avoid this algorithm.)
4781 *) Add processing of proxy certificates (see RFC 3820). This work was
4782 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
4783 EGEE (Enabling Grids for E-science in Europe).
4786 *) RC4 performance overhaul on modern architectures/implementations, such
4787 as Intel P4, IA-64 and AMD64.
4790 *) New utility extract-section.pl. This can be used specify an alternative
4791 section number in a pod file instead of having to treat each file as
4792 a separate case in Makefile. This can be done by adding two lines to the
4795 =for comment openssl_section:XXX
4797 The blank line is mandatory.
4801 *) New arguments -certform, -keyform and -pass for s_client and s_server
4802 to allow alternative format key and certificate files and passphrase
4806 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
4807 update associated structures and add various utility functions.
4809 Add new policy related verify parameters, include policy checking in
4810 standard verify code. Enhance 'smime' application with extra parameters
4811 to support policy checking and print out.
4814 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
4815 Nehemiah processors. These extensions support AES encryption in hardware
4816 as well as RNG (though RNG support is currently disabled).
4817 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
4819 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
4822 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
4823 [Andy Polyakov and a number of other people]
4825 *) Improved PowerPC platform support. Most notably BIGNUM assembler
4826 implementation contributed by IBM.
4827 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
4829 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
4830 exponent rather than 'unsigned long'. There is a corresponding change to
4831 the new 'rsa_keygen' element of the RSA_METHOD structure.
4832 [Jelte Jansen, Geoff Thorpe]
4834 *) Functionality for creating the initial serial number file is now
4835 moved from CA.pl to the 'ca' utility with a new option -create_serial.
4837 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
4838 number file to 1, which is bound to cause problems. To avoid
4839 the problems while respecting compatibility between different 0.9.7
4840 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
4841 CA.pl for serial number initialization. With the new release 0.9.8,
4842 we can fix the problem directly in the 'ca' utility.)
4845 *) Reduced header interdepencies by declaring more opaque objects in
4846 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
4847 give fewer recursive includes, which could break lazy source code - so
4848 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
4849 developers should define this symbol when building and using openssl to
4850 ensure they track the recommended behaviour, interfaces, [etc], but
4851 backwards-compatible behaviour prevails when this isn't defined.
4854 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
4857 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
4858 This will generate a random key of the appropriate length based on the
4859 cipher context. The EVP_CIPHER can provide its own random key generation
4860 routine to support keys of a specific form. This is used in the des and
4861 3des routines to generate a key of the correct parity. Update S/MIME
4862 code to use new functions and hence generate correct parity DES keys.
4863 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
4864 valid (weak or incorrect parity).
4867 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
4868 as looking them up. This is useful when the verified structure may contain
4869 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
4870 present unless the new PKCS7_NO_CRL flag is asserted.
4873 *) Extend ASN1 oid configuration module. It now additionally accepts the
4876 shortName = some long name, 1.2.3.4
4879 *) Reimplemented the BN_CTX implementation. There is now no more static
4880 limitation on the number of variables it can handle nor the depth of the
4881 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
4882 information can now expand as required, and rather than having a single
4883 static array of bignums, BN_CTX now uses a linked-list of such arrays
4884 allowing it to expand on demand whilst maintaining the usefulness of
4885 BN_CTX's "bundling".
4888 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
4889 to allow all RSA operations to function using a single BN_CTX.
4892 *) Preliminary support for certificate policy evaluation and checking. This
4893 is initially intended to pass the tests outlined in "Conformance Testing
4894 of Relying Party Client Certificate Path Processing Logic" v1.07.
4897 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
4898 remained unused and not that useful. A variety of other little bignum
4899 tweaks and fixes have also been made continuing on from the audit (see
4903 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
4904 associated ASN1, EVP and SSL functions and old ASN1 macros.
4907 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
4908 and this should never fail. So the return value from the use of
4909 BN_set_word() (which can fail due to needless expansion) is now deprecated;
4910 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
4913 *) BN_CTX_get() should return zero-valued bignums, providing the same
4914 initialised value as BN_new().
4915 [Geoff Thorpe, suggested by Ulf Möller]
4917 *) Support for inhibitAnyPolicy certificate extension.
4920 *) An audit of the BIGNUM code is underway, for which debugging code is
4921 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
4922 is considered valid when processing BIGNUMs, and causes execution to
4923 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
4924 further steps are taken to deliberately pollute unused data in BIGNUM
4925 structures to try and expose faulty code further on. For now, openssl will
4926 (in its default mode of operation) continue to tolerate the inconsistent
4927 forms that it has tolerated in the past, but authors and packagers should
4928 consider trying openssl and their own applications when compiled with
4929 these debugging symbols defined. It will help highlight potential bugs in
4930 their own code, and will improve the test coverage for OpenSSL itself. At
4931 some point, these tighter rules will become openssl's default to improve
4932 maintainability, though the assert()s and other overheads will remain only
4933 in debugging configurations. See bn.h for more details.
4934 [Geoff Thorpe, Nils Larsch, Ulf Möller]
4936 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
4937 that can only be obtained through BN_CTX_new() (which implicitly
4938 initialises it). The presence of this function only made it possible
4939 to overwrite an existing structure (and cause memory leaks).
4942 *) Because of the callback-based approach for implementing LHASH as a
4943 template type, lh_insert() adds opaque objects to hash-tables and
4944 lh_doall() or lh_doall_arg() are typically used with a destructor callback
4945 to clean up those corresponding objects before destroying the hash table
4946 (and losing the object pointers). So some over-zealous constifications in
4947 LHASH have been relaxed so that lh_insert() does not take (nor store) the
4948 objects as "const" and the lh_doall[_arg] callback wrappers are not
4949 prototyped to have "const" restrictions on the object pointers they are
4950 given (and so aren't required to cast them away any more).
4953 *) The tmdiff.h API was so ugly and minimal that our own timing utility
4954 (speed) prefers to use its own implementation. The two implementations
4955 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
4956 its object type properly exposed (MS_TM) instead of casting to/from "char
4957 *". This may still change yet if someone realises MS_TM and "ms_time_***"
4958 aren't necessarily the greatest nomenclatures - but this is what was used
4959 internally to the implementation so I've used that for now.
4962 *) Ensure that deprecated functions do not get compiled when
4963 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
4964 the self-tests were still using deprecated key-generation functions so
4965 these have been updated also.
4968 *) Reorganise PKCS#7 code to separate the digest location functionality
4969 into PKCS7_find_digest(), digest addition into PKCS7_bio_add_digest().
4970 New function PKCS7_set_digest() to set the digest type for PKCS#7
4971 digestedData type. Add additional code to correctly generate the
4972 digestedData type and add support for this type in PKCS7 initialization
4976 *) New function PKCS7_set0_type_other() this initializes a PKCS7
4977 structure of type "other".
4980 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
4981 sure the loop does correctly stop and breaking ("division by zero")
4982 modulus operations are not performed. The (pre-generated) prime
4983 table crypto/bn/bn_prime.h was already correct, but it could not be
4984 re-generated on some platforms because of the "division by zero"
4985 situation in the script.
4986 [Ralf S. Engelschall]
4988 *) Update support for ECC-based TLS ciphersuites according to
4989 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
4990 SHA-1 now is only used for "small" curves (where the
4991 representation of a field element takes up to 24 bytes); for
4992 larger curves, the field element resulting from ECDH is directly
4993 used as premaster secret.
4994 [Douglas Stebila (Sun Microsystems Laboratories)]
4996 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
4997 curve secp160r1 to the tests.
4998 [Douglas Stebila (Sun Microsystems Laboratories)]
5000 *) Add the possibility to load symbols globally with DSO.
5001 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
5003 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
5004 control of the error stack.
5007 *) Add support for STORE in ENGINE.
5010 *) Add the STORE type. The intention is to provide a common interface
5011 to certificate and key stores, be they simple file-based stores, or
5012 HSM-type store, or LDAP stores, or...
5013 NOTE: The code is currently UNTESTED and isn't really used anywhere.
5016 *) Add a generic structure called OPENSSL_ITEM. This can be used to
5017 pass a list of arguments to any function as well as provide a way
5018 for a function to pass data back to the caller.
5021 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
5022 works like BUF_strdup() but can be used to duplicate a portion of
5023 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
5027 *) Add the function sk_find_ex() which works like sk_find(), but will
5028 return an index to an element even if an exact match couldn't be
5029 found. The index is guaranteed to point at the element where the
5030 searched-for key would be inserted to preserve sorting order.
5033 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
5034 takes an extra flags argument for optional functionality. Currently,
5035 the following flags are defined:
5037 OBJ_BSEARCH_VALUE_ON_NOMATCH
5038 This one gets OBJ_bsearch_ex() to return a pointer to the first
5039 element where the comparing function returns a negative or zero
5042 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
5043 This one gets OBJ_bsearch_ex() to return a pointer to the first
5044 element where the comparing function returns zero. This is useful
5045 if there are more than one element where the comparing function
5049 *) Make it possible to create self-signed certificates with 'openssl ca'
5050 in such a way that the self-signed certificate becomes part of the
5051 CA database and uses the same mechanisms for serial number generation
5052 as all other certificate signing. The new flag '-selfsign' enables
5053 this functionality. Adapt CA.sh and CA.pl.in.
5056 *) Add functionality to check the public key of a certificate request
5057 against a given private. This is useful to check that a certificate
5058 request can be signed by that key (self-signing).
5061 *) Make it possible to have multiple active certificates with the same
5062 subject in the CA index file. This is done only if the keyword
5063 'unique_subject' is set to 'no' in the main CA section (default
5064 if 'CA_default') of the configuration file. The value is saved
5065 with the database itself in a separate index attribute file,
5066 named like the index file with '.attr' appended to the name.
5069 *) Generate muti valued AVAs using '+' notation in config files for
5073 *) Support for nameConstraints certificate extension.
5076 *) Support for policyConstraints certificate extension.
5079 *) Support for policyMappings certificate extension.
5082 *) Make sure the default DSA_METHOD implementation only uses its
5083 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
5084 and change its own handlers to be NULL so as to remove unnecessary
5085 indirection. This lets alternative implementations fallback to the
5086 default implementation more easily.
5089 *) Support for directoryName in GeneralName related extensions
5093 *) Make it possible to link applications using Makefile.shared.
5094 Make that possible even when linking against static libraries!
5097 *) Support for single pass processing for S/MIME signing. This now
5098 means that S/MIME signing can be done from a pipe, in addition
5099 cleartext signing (multipart/signed type) is effectively streaming
5100 and the signed data does not need to be all held in memory.
5102 This is done with a new flag PKCS7_STREAM. When this flag is set
5103 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
5104 is done after the data is output (and digests calculated) in
5105 SMIME_write_PKCS7().
5108 *) Add full support for -rpath/-R, both in shared libraries and
5109 applications, at least on the platforms where it's known how
5113 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
5114 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
5115 will now compute a table of multiples of the generator that
5116 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
5117 faster (notably in the case of a single point multiplication,
5118 scalar * generator).
5119 [Nils Larsch, Bodo Moeller]
5121 *) IPv6 support for certificate extensions. The various extensions
5122 which use the IP:a.b.c.d can now take IPv6 addresses using the
5123 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
5127 *) Added an ENGINE that implements RSA by performing private key
5128 exponentiations with the GMP library. The conversions to and from
5129 GMP's mpz_t format aren't optimised nor are any montgomery forms
5130 cached, and on x86 it appears OpenSSL's own performance has caught up.
5131 However there are likely to be other architectures where GMP could
5132 provide a boost. This ENGINE is not built in by default, but it can be
5133 specified at Configure time and should be accompanied by the necessary
5134 linker additions, eg;
5135 ./config -DOPENSSL_USE_GMP -lgmp
5138 *) "openssl engine" will not display ENGINE/DSO load failure errors when
5139 testing availability of engines with "-t" - the old behaviour is
5140 produced by increasing the feature's verbosity with "-tt".
5143 *) ECDSA routines: under certain error conditions uninitialized BN objects
5144 could be freed. Solution: make sure initialization is performed early
5145 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
5149 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
5150 and DH_METHOD (eg. by ENGINE implementations) to override the normal
5151 software implementations. For DSA and DH, parameter generation can
5152 also be overridden by providing the appropriate method callbacks.
5155 *) Change the "progress" mechanism used in key-generation and
5156 primality testing to functions that take a new BN_GENCB pointer in
5157 place of callback/argument pairs. The new API functions have "_ex"
5158 postfixes and the older functions are reimplemented as wrappers for
5159 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
5160 declarations of the old functions to help (graceful) attempts to
5161 migrate to the new functions. Also, the new key-generation API
5162 functions operate on a caller-supplied key-structure and return
5163 success/failure rather than returning a key or NULL - this is to
5164 help make "keygen" another member function of RSA_METHOD etc.
5166 Example for using the new callback interface:
5168 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
5172 BN_GENCB_set(&my_cb, my_callback, my_arg);
5174 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
5175 /* For the meaning of a, b in calls to my_callback(), see the
5176 * documentation of the function that calls the callback.
5177 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
5178 * my_callback should return 1 if it wants BN_is_prime_ex()
5179 * to continue, or 0 to stop.
5184 *) Change the ZLIB compression method to be stateful, and make it
5185 available to TLS with the number defined in
5186 draft-ietf-tls-compression-04.txt.
5189 *) Add the ASN.1 structures and functions for CertificatePair, which
5190 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
5192 CertificatePair ::= SEQUENCE {
5193 forward [0] Certificate OPTIONAL,
5194 reverse [1] Certificate OPTIONAL,
5195 -- at least one of the pair shall be present -- }
5197 Also implement the PEM functions to read and write certificate
5198 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
5200 This needed to be defined, mostly for the sake of the LDAP
5201 attribute crossCertificatePair, but may prove useful elsewhere as
5205 *) Make it possible to inhibit symlinking of shared libraries in
5206 Makefile.shared, for Cygwin's sake.
5209 *) Extend the BIGNUM API by creating a function
5210 void BN_set_negative(BIGNUM *a, int neg);
5211 and a macro that behave like
5212 int BN_is_negative(const BIGNUM *a);
5214 to avoid the need to access 'a->neg' directly in applications.
5217 *) Implement fast modular reduction for pseudo-Mersenne primes
5218 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
5219 EC_GROUP_new_curve_GFp() will now automatically use this
5221 [Nils Larsch <nla@trustcenter.de>]
5223 *) Add new lock type (CRYPTO_LOCK_BN).
5226 *) Change the ENGINE framework to automatically load engines
5227 dynamically from specific directories unless they could be
5228 found to already be built in or loaded. Move all the
5229 current engines except for the cryptodev one to a new
5231 The engines in engines/ are built as shared libraries if
5232 the "shared" options was given to ./Configure or ./config.
5233 Otherwise, they are inserted in libcrypto.a.
5234 /usr/local/ssl/engines is the default directory for dynamic
5235 engines, but that can be overridden at configure time through
5236 the usual use of --prefix and/or --openssldir, and at run
5237 time with the environment variable OPENSSL_ENGINES.
5238 [Geoff Thorpe and Richard Levitte]
5240 *) Add Makefile.shared, a helper makefile to build shared
5241 libraries. Adapt Makefile.org.
5244 *) Add version info to Win32 DLLs.
5245 [Peter 'Luna' Runestig" <peter@runestig.com>]
5247 *) Add new 'medium level' PKCS#12 API. Certificates and keys
5248 can be added using this API to created arbitrary PKCS#12
5249 files while avoiding the low level API.
5251 New options to PKCS12_create(), key or cert can be NULL and
5252 will then be omitted from the output file. The encryption
5253 algorithm NIDs can be set to -1 for no encryption, the mac
5254 iteration count can be set to 0 to omit the mac.
5256 Enhance pkcs12 utility by making the -nokeys and -nocerts
5257 options work when creating a PKCS#12 file. New option -nomac
5258 to omit the mac, NONE can be set for an encryption algorithm.
5259 New code is modified to use the enhanced PKCS12_create()
5260 instead of the low level API.
5263 *) Extend ASN1 encoder to support indefinite length constructed
5264 encoding. This can output sequences tags and octet strings in
5265 this form. Modify pk7_asn1.c to support indefinite length
5266 encoding. This is experimental and needs additional code to
5267 be useful, such as an ASN1 bio and some enhanced streaming
5270 Extend template encode functionality so that tagging is passed
5271 down to the template encoder.
5274 *) Let 'openssl req' fail if an argument to '-newkey' is not
5275 recognized instead of using RSA as a default.
5278 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
5279 As these are not official, they are not included in "ALL";
5280 the "ECCdraft" ciphersuite group alias can be used to select them.
5281 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
5283 *) Add ECDH engine support.
5284 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
5286 *) Add ECDH in new directory crypto/ecdh/.
5287 [Douglas Stebila (Sun Microsystems Laboratories)]
5289 *) Let BN_rand_range() abort with an error after 100 iterations
5290 without success (which indicates a broken PRNG).
5293 *) Change BN_mod_sqrt() so that it verifies that the input value
5294 is really the square of the return value. (Previously,
5295 BN_mod_sqrt would show GIGO behaviour.)
5298 *) Add named elliptic curves over binary fields from X9.62, SECG,
5299 and WAP/WTLS; add OIDs that were still missing.
5301 [Sheueling Chang Shantz and Douglas Stebila
5302 (Sun Microsystems Laboratories)]
5304 *) Extend the EC library for elliptic curves over binary fields
5305 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
5308 EC_GF2m_simple_method
5312 EC_GROUP_new_curve_GF2m
5313 EC_GROUP_set_curve_GF2m
5314 EC_GROUP_get_curve_GF2m
5315 EC_POINT_set_affine_coordinates_GF2m
5316 EC_POINT_get_affine_coordinates_GF2m
5317 EC_POINT_set_compressed_coordinates_GF2m
5319 Point compression for binary fields is disabled by default for
5320 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
5323 As binary polynomials are represented as BIGNUMs, various members
5324 of the EC_GROUP and EC_POINT data structures can be shared
5325 between the implementations for prime fields and binary fields;
5326 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
5327 are essentially identical to their ..._GFp counterparts.
5328 (For simplicity, the '..._GFp' prefix has been dropped from
5329 various internal method names.)
5331 An internal 'field_div' method (similar to 'field_mul' and
5332 'field_sqr') has been added; this is used only for binary fields.
5334 [Sheueling Chang Shantz and Douglas Stebila
5335 (Sun Microsystems Laboratories)]
5337 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
5338 through methods ('mul', 'precompute_mult').
5340 The generic implementations (now internally called 'ec_wNAF_mul'
5341 and 'ec_wNAF_precomputed_mult') remain the default if these
5342 methods are undefined.
5344 [Sheueling Chang Shantz and Douglas Stebila
5345 (Sun Microsystems Laboratories)]
5347 *) New function EC_GROUP_get_degree, which is defined through
5348 EC_METHOD. For curves over prime fields, this returns the bit
5349 length of the modulus.
5351 [Sheueling Chang Shantz and Douglas Stebila
5352 (Sun Microsystems Laboratories)]
5354 *) New functions EC_GROUP_dup, EC_POINT_dup.
5355 (These simply call ..._new and ..._copy).
5357 [Sheueling Chang Shantz and Douglas Stebila
5358 (Sun Microsystems Laboratories)]
5360 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
5361 Polynomials are represented as BIGNUMs (where the sign bit is not
5362 used) in the following functions [macros]:
5365 BN_GF2m_sub [= BN_GF2m_add]
5366 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
5367 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
5368 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
5370 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
5371 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
5372 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
5373 BN_GF2m_cmp [= BN_ucmp]
5375 (Note that only the 'mod' functions are actually for fields GF(2^m).
5376 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
5378 For some functions, an the irreducible polynomial defining a
5379 field can be given as an 'unsigned int[]' with strictly
5380 decreasing elements giving the indices of those bits that are set;
5381 i.e., p[] represents the polynomial
5382 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
5384 p[0] > p[1] > ... > p[k] = 0.
5385 This applies to the following functions:
5390 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
5391 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
5393 BN_GF2m_mod_sqrt_arr
5394 BN_GF2m_mod_solve_quad_arr
5398 Conversion can be performed by the following functions:
5403 bntest.c has additional tests for binary polynomial arithmetic.
5405 Two implementations for BN_GF2m_mod_div() are available.
5406 The default algorithm simply uses BN_GF2m_mod_inv() and
5407 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
5408 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
5409 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
5411 [Sheueling Chang Shantz and Douglas Stebila
5412 (Sun Microsystems Laboratories)]
5414 *) Add new error code 'ERR_R_DISABLED' that can be used when some
5415 functionality is disabled at compile-time.
5416 [Douglas Stebila <douglas.stebila@sun.com>]
5418 *) Change default behaviour of 'openssl asn1parse' so that more
5419 information is visible when viewing, e.g., a certificate:
5421 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
5422 mode the content of non-printable OCTET STRINGs is output in a
5423 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
5424 avoid the appearance of a printable string.
5425 [Nils Larsch <nla@trustcenter.de>]
5427 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
5429 EC_GROUP_set_asn1_flag()
5430 EC_GROUP_get_asn1_flag()
5431 EC_GROUP_set_point_conversion_form()
5432 EC_GROUP_get_point_conversion_form()
5433 These control ASN1 encoding details:
5434 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
5435 has been set to OPENSSL_EC_NAMED_CURVE.
5436 - Points are encoded in uncompressed form by default; options for
5437 asn1_for are as for point2oct, namely
5438 POINT_CONVERSION_COMPRESSED
5439 POINT_CONVERSION_UNCOMPRESSED
5440 POINT_CONVERSION_HYBRID
5442 Also add 'seed' and 'seed_len' members to EC_GROUP with access
5445 EC_GROUP_get0_seed()
5446 EC_GROUP_get_seed_len()
5447 This is used only for ASN1 purposes (so far).
5448 [Nils Larsch <nla@trustcenter.de>]
5450 *) Add 'field_type' member to EC_METHOD, which holds the NID
5451 of the appropriate field type OID. The new function
5452 EC_METHOD_get_field_type() returns this value.
5453 [Nils Larsch <nla@trustcenter.de>]
5458 EC_POINT_point2hex()
5459 EC_POINT_hex2point()
5460 providing useful interfaces to EC_POINT_point2oct() and
5461 EC_POINT_oct2point().
5462 [Nils Larsch <nla@trustcenter.de>]
5464 *) Change internals of the EC library so that the functions
5465 EC_GROUP_set_generator()
5466 EC_GROUP_get_generator()
5467 EC_GROUP_get_order()
5468 EC_GROUP_get_cofactor()
5469 are implemented directly in crypto/ec/ec_lib.c and not dispatched
5470 to methods, which would lead to unnecessary code duplication when
5471 adding different types of curves.
5472 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
5474 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
5475 arithmetic, and such that modified wNAFs are generated
5476 (which avoid length expansion in many cases).
5479 *) Add a function EC_GROUP_check_discriminant() (defined via
5480 EC_METHOD) that verifies that the curve discriminant is non-zero.
5482 Add a function EC_GROUP_check() that makes some sanity tests
5483 on a EC_GROUP, its generator and order. This includes
5484 EC_GROUP_check_discriminant().
5485 [Nils Larsch <nla@trustcenter.de>]
5487 *) Add ECDSA in new directory crypto/ecdsa/.
5489 Add applications 'openssl ecparam' and 'openssl ecdsa'
5490 (these are based on 'openssl dsaparam' and 'openssl dsa').
5492 ECDSA support is also included in various other files across the
5493 library. Most notably,
5494 - 'openssl req' now has a '-newkey ecdsa:file' option;
5495 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
5496 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
5497 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
5498 them suitable for ECDSA where domain parameters must be
5499 extracted before the specific public key;
5500 - ECDSA engine support has been added.
5501 [Nils Larsch <nla@trustcenter.de>]
5503 *) Include some named elliptic curves, and add OIDs from X9.62,
5504 SECG, and WAP/WTLS. Each curve can be obtained from the new
5506 EC_GROUP_new_by_curve_name(),
5507 and the list of available named curves can be obtained with
5508 EC_get_builtin_curves().
5509 Also add a 'curve_name' member to EC_GROUP objects, which can be
5511 EC_GROUP_set_curve_name()
5512 EC_GROUP_get_curve_name()
5513 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
5515 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
5516 was actually never needed) and in BN_mul(). The removal in BN_mul()
5517 required a small change in bn_mul_part_recursive() and the addition
5518 of the functions bn_cmp_part_words(), bn_sub_part_words() and
5519 bn_add_part_words(), which do the same thing as bn_cmp_words(),
5520 bn_sub_words() and bn_add_words() except they take arrays with
5524 Changes between 0.9.7l and 0.9.7m [23 Feb 2007]
5526 *) Cleanse PEM buffers before freeing them since they may contain
5528 [Benjamin Bennett <ben@psc.edu>]
5530 *) Include "!eNULL" in SSL_DEFAULT_CIPHER_LIST to make sure that
5531 a ciphersuite string such as "DEFAULT:RSA" cannot enable
5532 authentication-only ciphersuites.
5535 *) Since AES128 and AES256 share a single mask bit in the logic of
5536 ssl/ssl_ciph.c, the code for masking out disabled ciphers needs a
5537 kludge to work properly if AES128 is available and AES256 isn't.
5540 *) Expand security boundary to match 1.1.1 module.
5543 *) Remove redundant features: hash file source, editing of test vectors
5544 modify fipsld to use external fips_premain.c signature.
5547 *) New perl script mkfipsscr.pl to create shell scripts or batch files to
5548 run algorithm test programs.
5551 *) Make algorithm test programs more tolerant of whitespace.
5554 *) Have SSL/TLS server implementation tolerate "mismatched" record
5555 protocol version while receiving ClientHello even if the
5556 ClientHello is fragmented. (The server can't insist on the
5557 particular protocol version it has chosen before the ServerHello
5558 message has informed the client about his choice.)
5561 *) Load error codes if they are not already present instead of using a
5562 static variable. This allows them to be cleanly unloaded and reloaded.
5565 Changes between 0.9.7k and 0.9.7l [28 Sep 2006]
5567 *) Introduce limits to prevent malicious keys being able to
5568 cause a denial of service. (CVE-2006-2940)
5569 [Steve Henson, Bodo Moeller]
5571 *) Fix ASN.1 parsing of certain invalid structures that can result
5572 in a denial of service. (CVE-2006-2937) [Steve Henson]
5574 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
5575 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
5577 *) Fix SSL client code which could crash if connecting to a
5578 malicious SSLv2 server. (CVE-2006-4343)
5579 [Tavis Ormandy and Will Drewry, Google Security Team]
5581 *) Change ciphersuite string processing so that an explicit
5582 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
5583 will no longer include "AES128-SHA"), and any other similar
5584 ciphersuite (same bitmap) from *other* protocol versions (so that
5585 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
5586 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
5587 changes from 0.9.8b and 0.9.8d.
5590 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
5592 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
5593 (CVE-2006-4339) [Ben Laurie and Google Security Team]
5595 *) Change the Unix randomness entropy gathering to use poll() when
5596 possible instead of select(), since the latter has some
5597 undesirable limitations.
5598 [Darryl Miles via Richard Levitte and Bodo Moeller]
5600 *) Disable rogue ciphersuites:
5602 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
5603 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
5604 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
5606 The latter two were purportedly from
5607 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
5610 Also deactive the remaining ciphersuites from
5611 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
5612 unofficial, and the ID has long expired.
5615 *) Fix RSA blinding Heisenbug (problems sometimes occurred on
5616 dual-core machines) and other potential thread-safety issues.
5619 Changes between 0.9.7i and 0.9.7j [04 May 2006]
5621 *) Adapt fipsld and the build system to link against the validated FIPS
5622 module in FIPS mode.
5625 *) Fixes for VC++ 2005 build under Windows.
5628 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
5629 from a Windows bash shell such as MSYS. It is autodetected from the
5630 "config" script when run from a VC++ environment. Modify standard VC++
5631 build to use fipscanister.o from the GNU make build.
5634 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
5636 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
5637 The value now differs depending on if you build for FIPS or not.
5638 BEWARE! A program linked with a shared FIPSed libcrypto can't be
5639 safely run with a non-FIPSed libcrypto, as it may crash because of
5640 the difference induced by this change.
5643 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
5645 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
5646 (part of SSL_OP_ALL). This option used to disable the
5647 countermeasure against man-in-the-middle protocol-version
5648 rollback in the SSL 2.0 server implementation, which is a bad
5649 idea. (CVE-2005-2969)
5651 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
5652 for Information Security, National Institute of Advanced Industrial
5653 Science and Technology [AIST], Japan)]
5655 *) Minimal support for X9.31 signatures and PSS padding modes. This is
5656 mainly for FIPS compliance and not fully integrated at this stage.
5659 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
5660 the exponentiation using a fixed-length exponent. (Otherwise,
5661 the information leaked through timing could expose the secret key
5662 after many signatures; cf. Bleichenbacher's attack on DSA with
5666 *) Make a new fixed-window mod_exp implementation the default for
5667 RSA, DSA, and DH private-key operations so that the sequence of
5668 squares and multiplies and the memory access pattern are
5669 independent of the particular secret key. This will mitigate
5670 cache-timing and potential related attacks.
5672 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
5673 and this is automatically used by BN_mod_exp_mont() if the new flag
5674 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
5675 will use this BN flag for private exponents unless the flag
5676 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
5677 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
5679 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
5681 *) Change the client implementation for SSLv23_method() and
5682 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
5683 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
5684 (Previously, the SSL 2.0 backwards compatible Client Hello
5685 message format would be used even with SSL_OP_NO_SSLv2.)
5688 *) Add support for smime-type MIME parameter in S/MIME messages which some
5692 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
5693 a threadsafe manner. Modify rsa code to use new function and add calls
5694 to dsa and dh code (which had race conditions before).
5697 *) Include the fixed error library code in the C error file definitions
5698 instead of fixing them up at runtime. This keeps the error code
5699 structures constant.
5702 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
5704 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
5707 *) Fixes for newer kerberos headers. NB: the casts are needed because
5708 the 'length' field is signed on one version and unsigned on another
5709 with no (?) obvious way to tell the difference, without these VC++
5710 complains. Also the "definition" of FAR (blank) is no longer included
5711 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
5712 some needed definitions.
5715 *) Undo Cygwin change.
5718 *) Added support for proxy certificates according to RFC 3820.
5719 Because they may be a security thread to unaware applications,
5720 they must be explicitly allowed in run-time. See
5721 docs/HOWTO/proxy_certificates.txt for further information.
5724 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
5726 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
5727 server and client random values. Previously
5728 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
5729 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
5731 This change has negligible security impact because:
5733 1. Server and client random values still have 24 bytes of pseudo random
5736 2. Server and client random values are sent in the clear in the initial
5739 3. The master secret is derived using the premaster secret (48 bytes in
5740 size for static RSA ciphersuites) as well as client server and random
5743 The OpenSSL team would like to thank the UK NISCC for bringing this issue
5746 [Stephen Henson, reported by UK NISCC]
5748 *) Use Windows randomness collection on Cygwin.
5751 *) Fix hang in EGD/PRNGD query when communication socket is closed
5752 prematurely by EGD/PRNGD.
5753 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
5755 *) Prompt for pass phrases when appropriate for PKCS12 input format.
5758 *) Back-port of selected performance improvements from development
5759 branch, as well as improved support for PowerPC platforms.
5762 *) Add lots of checks for memory allocation failure, error codes to indicate
5763 failure and freeing up memory if a failure occurs.
5764 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
5766 *) Add new -passin argument to dgst.
5769 *) Perform some character comparisons of different types in X509_NAME_cmp:
5770 this is needed for some certificates that re-encode DNs into UTF8Strings
5771 (in violation of RFC3280) and can't or won't issue name rollover
5775 *) Make an explicit check during certificate validation to see that
5776 the CA setting in each certificate on the chain is correct. As a
5777 side effect always do the following basic checks on extensions,
5778 not just when there's an associated purpose to the check:
5780 - if there is an unhandled critical extension (unless the user
5781 has chosen to ignore this fault)
5782 - if the path length has been exceeded (if one is set at all)
5783 - that certain extensions fit the associated purpose (if one has
5787 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
5789 *) Avoid a race condition when CRLs are checked in a multi threaded
5790 environment. This would happen due to the reordering of the revoked
5791 entries during signature checking and serial number lookup. Now the
5792 encoding is cached and the serial number sort performed under a lock.
5793 Add new STACK function sk_is_sorted().
5796 *) Add Delta CRL to the extension code.
5799 *) Various fixes to s3_pkt.c so alerts are sent properly.
5800 [David Holmes <d.holmes@f5.com>]
5802 *) Reduce the chances of duplicate issuer name and serial numbers (in
5803 violation of RFC3280) using the OpenSSL certificate creation utilities.
5804 This is done by creating a random 64 bit value for the initial serial
5805 number when a serial number file is created or when a self signed
5806 certificate is created using 'openssl req -x509'. The initial serial
5807 number file is created using 'openssl x509 -next_serial' in CA.pl
5808 rather than being initialized to 1.
5811 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
5813 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
5814 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
5815 [Joe Orton, Steve Henson]
5817 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
5819 [Joe Orton, Steve Henson]
5821 *) Make it possible to have multiple active certificates with the same
5822 subject in the CA index file. This is done only if the keyword
5823 'unique_subject' is set to 'no' in the main CA section (default
5824 if 'CA_default') of the configuration file. The value is saved
5825 with the database itself in a separate index attribute file,
5826 named like the index file with '.attr' appended to the name.
5829 *) X509 verify fixes. Disable broken certificate workarounds when
5830 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
5831 keyUsage extension present. Don't accept CRLs with unhandled critical
5832 extensions: since verify currently doesn't process CRL extensions this
5833 rejects a CRL with *any* critical extensions. Add new verify error codes
5837 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
5838 A clarification of RFC2560 will require the use of OCTET STRINGs and
5839 some implementations cannot handle the current raw format. Since OpenSSL
5840 copies and compares OCSP nonces as opaque blobs without any attempt at
5841 parsing them this should not create any compatibility issues.
5844 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
5845 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
5846 this HMAC (and other) operations are several times slower than OpenSSL
5850 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
5851 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
5853 *) Use the correct content when signing type "other".
5856 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
5858 *) Fix various bugs revealed by running the NISCC test suite:
5860 Stop out of bounds reads in the ASN1 code when presented with
5861 invalid tags (CVE-2003-0543 and CVE-2003-0544).
5863 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
5865 If verify callback ignores invalid public key errors don't try to check
5866 certificate signature with the NULL public key.
5870 *) New -ignore_err option in ocsp application to stop the server
5871 exiting on the first error in a request.
5874 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
5875 if the server requested one: as stated in TLS 1.0 and SSL 3.0
5879 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
5880 extra data after the compression methods not only for TLS 1.0
5881 but also for SSL 3.0 (as required by the specification).
5882 [Bodo Moeller; problem pointed out by Matthias Loepfe]
5884 *) Change X509_certificate_type() to mark the key as exported/exportable
5885 when it's 512 *bits* long, not 512 bytes.
5888 *) Change AES_cbc_encrypt() so it outputs exact multiple of
5889 blocks during encryption.
5892 *) Various fixes to base64 BIO and non blocking I/O. On write
5893 flushes were not handled properly if the BIO retried. On read
5894 data was not being buffered properly and had various logic bugs.
5895 This also affects blocking I/O when the data being decoded is a
5899 *) Various S/MIME bugfixes and compatibility changes:
5900 output correct application/pkcs7 MIME type if
5901 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
5902 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
5903 of files as .eml work). Correctly handle very long lines in MIME
5907 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
5909 *) Countermeasure against the Klima-Pokorny-Rosa extension of
5910 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
5911 a protocol version number mismatch like a decryption error
5912 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
5915 *) Turn on RSA blinding by default in the default implementation
5916 to avoid a timing attack. Applications that don't want it can call
5917 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
5918 They would be ill-advised to do so in most cases.
5919 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
5921 *) Change RSA blinding code so that it works when the PRNG is not
5922 seeded (in this case, the secret RSA exponent is abused as
5923 an unpredictable seed -- if it is not unpredictable, there
5924 is no point in blinding anyway). Make RSA blinding thread-safe
5925 by remembering the creator's thread ID in rsa->blinding and
5926 having all other threads use local one-time blinding factors
5927 (this requires more computation than sharing rsa->blinding, but
5928 avoids excessive locking; and if an RSA object is not shared
5929 between threads, blinding will still be very fast).
5932 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
5933 ENGINE as defaults for all supported algorithms irrespective of
5934 the 'flags' parameter. 'flags' is now honoured, so applications
5935 should make sure they are passing it correctly.
5938 *) Target "mingw" now allows native Windows code to be generated in
5939 the Cygwin environment as well as with the MinGW compiler.
5942 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
5944 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
5945 via timing by performing a MAC computation even if incorrect
5946 block cipher padding has been found. This is a countermeasure
5947 against active attacks where the attacker has to distinguish
5948 between bad padding and a MAC verification error. (CVE-2003-0078)
5950 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
5951 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
5952 Martin Vuagnoux (EPFL, Ilion)]
5954 *) Make the no-err option work as intended. The intention with no-err
5955 is not to have the whole error stack handling routines removed from
5956 libcrypto, it's only intended to remove all the function name and
5957 reason texts, thereby removing some of the footprint that may not
5958 be interesting if those errors aren't displayed anyway.
5960 NOTE: it's still possible for any application or module to have it's
5961 own set of error texts inserted. The routines are there, just not
5962 used by default when no-err is given.
5965 *) Add support for FreeBSD on IA64.
5966 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
5968 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
5969 Kerberos function mit_des_cbc_cksum(). Before this change,
5970 the value returned by DES_cbc_cksum() was like the one from
5971 mit_des_cbc_cksum(), except the bytes were swapped.
5972 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
5974 *) Allow an application to disable the automatic SSL chain building.
5975 Before this a rather primitive chain build was always performed in
5976 ssl3_output_cert_chain(): an application had no way to send the
5977 correct chain if the automatic operation produced an incorrect result.
5979 Now the chain builder is disabled if either:
5981 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
5983 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
5985 The reasoning behind this is that an application would not want the
5986 auto chain building to take place if extra chain certificates are
5987 present and it might also want a means of sending no additional
5988 certificates (for example the chain has two certificates and the
5992 *) Add the possibility to build without the ENGINE framework.
5993 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
5995 *) Under Win32 gmtime() can return NULL: check return value in
5996 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
5999 *) DSA routines: under certain error conditions uninitialized BN objects
6000 could be freed. Solution: make sure initialization is performed early
6001 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
6002 Nils Larsch <nla@trustcenter.de> via PR#459)
6005 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
6006 checked on reconnect on the client side, therefore session resumption
6007 could still fail with a "ssl session id is different" error. This
6008 behaviour is masked when SSL_OP_ALL is used due to
6009 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
6010 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
6011 followup to PR #377.
6014 *) IA-32 assembler support enhancements: unified ELF targets, support
6015 for SCO/Caldera platforms, fix for Cygwin shared build.
6018 *) Add support for FreeBSD on sparc64. As a consequence, support for
6019 FreeBSD on non-x86 processors is separate from x86 processors on
6020 the config script, much like the NetBSD support.
6021 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
6023 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
6025 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
6028 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
6029 code (06) was taken as the first octet of the session ID and the last
6030 octet was ignored consequently. As a result SSLv2 client side session
6031 caching could not have worked due to the session ID mismatch between
6033 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
6037 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
6038 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
6042 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
6043 seems that in spite of existing for more than a year, many application
6044 author have done nothing to provide the necessary callbacks, which
6045 means that this particular engine will not work properly anywhere.
6046 This is a very unfortunate situation which forces us, in the name
6047 of usability, to give the hw_ncipher.c a static lock, which is part
6049 NOTE: This is for the 0.9.7 series ONLY. This hack will never
6050 appear in 0.9.8 or later. We EXPECT application authors to have
6051 dealt properly with this when 0.9.8 is released (unless we actually
6052 make such changes in the libcrypto locking code that changes will
6053 have to be made anyway).
6056 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
6057 octets have been read, EOF or an error occurs. Without this change
6058 some truncated ASN1 structures will not produce an error.
6061 *) Disable Heimdal support, since it hasn't been fully implemented.
6062 Still give the possibility to force the use of Heimdal, but with
6063 warnings and a request that patches get sent to openssl-dev.
6066 *) Add the VC-CE target, introduce the WINCE sysname, and add
6067 INSTALL.WCE and appropriate conditionals to make it build.
6068 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
6070 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
6071 cygssl-x.y.z.dll, where x, y and z are the major, minor and
6072 edit numbers of the version.
6073 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
6075 *) Introduce safe string copy and catenation functions
6076 (BUF_strlcpy() and BUF_strlcat()).
6077 [Ben Laurie (CHATS) and Richard Levitte]
6079 *) Avoid using fixed-size buffers for one-line DNs.
6080 [Ben Laurie (CHATS)]
6082 *) Add BUF_MEM_grow_clean() to avoid information leakage when
6083 resizing buffers containing secrets, and use where appropriate.
6084 [Ben Laurie (CHATS)]
6086 *) Avoid using fixed size buffers for configuration file location.
6087 [Ben Laurie (CHATS)]
6089 *) Avoid filename truncation for various CA files.
6090 [Ben Laurie (CHATS)]
6092 *) Use sizeof in preference to magic numbers.
6093 [Ben Laurie (CHATS)]
6095 *) Avoid filename truncation in cert requests.
6096 [Ben Laurie (CHATS)]
6098 *) Add assertions to check for (supposedly impossible) buffer
6100 [Ben Laurie (CHATS)]
6102 *) Don't cache truncated DNS entries in the local cache (this could
6103 potentially lead to a spoofing attack).
6104 [Ben Laurie (CHATS)]
6106 *) Fix various buffers to be large enough for hex/decimal
6107 representations in a platform independent manner.
6108 [Ben Laurie (CHATS)]
6110 *) Add CRYPTO_realloc_clean() to avoid information leakage when
6111 resizing buffers containing secrets, and use where appropriate.
6112 [Ben Laurie (CHATS)]
6114 *) Add BIO_indent() to avoid much slightly worrying code to do
6116 [Ben Laurie (CHATS)]
6118 *) Convert sprintf()/BIO_puts() to BIO_printf().
6119 [Ben Laurie (CHATS)]
6121 *) buffer_gets() could terminate with the buffer only half
6123 [Ben Laurie (CHATS)]
6125 *) Add assertions to prevent user-supplied crypto functions from
6126 overflowing internal buffers by having large block sizes, etc.
6127 [Ben Laurie (CHATS)]
6129 *) New OPENSSL_assert() macro (similar to assert(), but enabled
6131 [Ben Laurie (CHATS)]
6133 *) Eliminate unused copy of key in RC4.
6134 [Ben Laurie (CHATS)]
6136 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
6137 [Ben Laurie (CHATS)]
6139 *) Fix off-by-one error in EGD path.
6140 [Ben Laurie (CHATS)]
6142 *) If RANDFILE path is too long, ignore instead of truncating.
6143 [Ben Laurie (CHATS)]
6145 *) Eliminate unused and incorrectly sized X.509 structure
6147 [Ben Laurie (CHATS)]
6149 *) Eliminate unused and dangerous function knumber().
6150 [Ben Laurie (CHATS)]
6152 *) Eliminate unused and dangerous structure, KSSL_ERR.
6153 [Ben Laurie (CHATS)]
6155 *) Protect against overlong session ID context length in an encoded
6156 session object. Since these are local, this does not appear to be
6158 [Ben Laurie (CHATS)]
6160 *) Change from security patch (see 0.9.6e below) that did not affect
6161 the 0.9.6 release series:
6163 Remote buffer overflow in SSL3 protocol - an attacker could
6164 supply an oversized master key in Kerberos-enabled versions.
6166 [Ben Laurie (CHATS)]
6168 *) Change the SSL kerb5 codes to match RFC 2712.
6171 *) Make -nameopt work fully for req and add -reqopt switch.
6172 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
6174 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
6175 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
6177 *) Make sure tests can be performed even if the corresponding algorithms
6178 have been removed entirely. This was also the last step to make
6179 OpenSSL compilable with DJGPP under all reasonable conditions.
6180 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
6182 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
6183 to allow version independent disabling of normally unselected ciphers,
6184 which may be activated as a side-effect of selecting a single cipher.
6186 (E.g., cipher list string "RSA" enables ciphersuites that are left
6187 out of "ALL" because they do not provide symmetric encryption.
6188 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
6189 [Lutz Jaenicke, Bodo Moeller]
6191 *) Add appropriate support for separate platform-dependent build
6192 directories. The recommended way to make a platform-dependent
6193 build directory is the following (tested on Linux), maybe with
6196 # Place yourself outside of the OpenSSL source tree. In
6197 # this example, the environment variable OPENSSL_SOURCE
6198 # is assumed to contain the absolute OpenSSL source directory.
6199 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
6200 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
6201 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
6202 mkdir -p `dirname $F`
6203 ln -s $OPENSSL_SOURCE/$F $F
6206 To be absolutely sure not to disturb the source tree, a "make clean"
6207 is a good thing. If it isn't successful, don't worry about it,
6208 it probably means the source directory is very clean.
6211 *) Make sure any ENGINE control commands make local copies of string
6212 pointers passed to them whenever necessary. Otherwise it is possible
6213 the caller may have overwritten (or deallocated) the original string
6214 data when a later ENGINE operation tries to use the stored values.
6215 [Götz Babin-Ebell <babinebell@trustcenter.de>]
6217 *) Improve diagnostics in file reading and command-line digests.
6218 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
6220 *) Add AES modes CFB and OFB to the object database. Correct an
6221 error in AES-CFB decryption.
6224 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
6225 allows existing EVP_CIPHER_CTX structures to be reused after
6226 calling EVP_*Final(). This behaviour is used by encryption
6227 BIOs and some applications. This has the side effect that
6228 applications must explicitly clean up cipher contexts with
6229 EVP_CIPHER_CTX_cleanup() or they will leak memory.
6232 *) Check the values of dna and dnb in bn_mul_recursive before calling
6233 bn_mul_comba (a non zero value means the a or b arrays do not contain
6234 n2 elements) and fallback to bn_mul_normal if either is not zero.
6237 *) Fix escaping of non-ASCII characters when using the -subj option
6238 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
6241 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
6242 form for "surname", serialNumber has no short form.
6243 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
6244 therefore remove "mail" short name for "internet 7".
6245 The OID for unique identifiers in X509 certificates is
6246 x500UniqueIdentifier, not uniqueIdentifier.
6247 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
6250 *) Add an "init" command to the ENGINE config module and auto initialize
6251 ENGINEs. Without any "init" command the ENGINE will be initialized
6252 after all ctrl commands have been executed on it. If init=1 the
6253 ENGINE is initailized at that point (ctrls before that point are run
6254 on the uninitialized ENGINE and after on the initialized one). If
6255 init=0 then the ENGINE will not be iniatialized at all.
6258 *) Fix the 'app_verify_callback' interface so that the user-defined
6259 argument is actually passed to the callback: In the
6260 SSL_CTX_set_cert_verify_callback() prototype, the callback
6261 declaration has been changed from
6264 int (*cb)(X509_STORE_CTX *,void *);
6265 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
6266 i=s->ctx->app_verify_callback(&ctx)
6267 has been changed into
6268 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
6270 To update applications using SSL_CTX_set_cert_verify_callback(),
6271 a dummy argument can be added to their callback functions.
6272 [D. K. Smetters <smetters@parc.xerox.com>]
6274 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
6275 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
6277 *) Add and OPENSSL_LOAD_CONF define which will cause
6278 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
6279 This allows older applications to transparently support certain
6280 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
6281 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
6282 load the config file and OPENSSL_add_all_algorithms_conf() which will
6283 always load it have also been added.
6286 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
6287 Adjust NIDs and EVP layer.
6288 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
6290 *) Config modules support in openssl utility.
6292 Most commands now load modules from the config file,
6293 though in a few (such as version) this isn't done
6294 because it couldn't be used for anything.
6296 In the case of ca and req the config file used is
6297 the same as the utility itself: that is the -config
6298 command line option can be used to specify an
6302 *) Move default behaviour from OPENSSL_config(). If appname is NULL
6303 use "openssl_conf" if filename is NULL use default openssl config file.
6306 *) Add an argument to OPENSSL_config() to allow the use of an alternative
6307 config section name. Add a new flag to tolerate a missing config file
6308 and move code to CONF_modules_load_file().
6311 *) Support for crypto accelerator cards from Accelerated Encryption
6312 Processing, www.aep.ie. (Use engine 'aep')
6313 The support was copied from 0.9.6c [engine] and adapted/corrected
6314 to work with the new engine framework.
6315 [AEP Inc. and Richard Levitte]
6317 *) Support for SureWare crypto accelerator cards from Baltimore
6318 Technologies. (Use engine 'sureware')
6319 The support was copied from 0.9.6c [engine] and adapted
6320 to work with the new engine framework.
6323 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
6324 make the newer ENGINE framework commands for the CHIL engine work.
6325 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
6327 *) Make it possible to produce shared libraries on ReliantUNIX.
6328 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
6330 *) Add the configuration target debug-linux-ppro.
6331 Make 'openssl rsa' use the general key loading routines
6332 implemented in apps.c, and make those routines able to
6333 handle the key format FORMAT_NETSCAPE and the variant
6335 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
6337 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
6338 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
6340 *) Add -keyform to rsautl, and document -engine.
6341 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
6343 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
6344 BIO_R_NO_SUCH_FILE error code rather than the generic
6345 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
6348 *) Add new functions
6350 ERR_peek_last_error_line
6351 ERR_peek_last_error_line_data.
6352 These are similar to
6355 ERR_peek_error_line_data,
6356 but report on the latest error recorded rather than the first one
6357 still in the error queue.
6358 [Ben Laurie, Bodo Moeller]
6360 *) default_algorithms option in ENGINE config module. This allows things
6362 default_algorithms = ALL
6363 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
6366 *) Preliminary ENGINE config module.
6369 *) New experimental application configuration code.
6372 *) Change the AES code to follow the same name structure as all other
6373 symmetric ciphers, and behave the same way. Move everything to
6374 the directory crypto/aes, thereby obsoleting crypto/rijndael.
6375 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
6377 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
6378 [Ben Laurie and Theo de Raadt]
6380 *) Add option to output public keys in req command.
6381 [Massimiliano Pala madwolf@openca.org]
6383 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
6384 (up to about 10% better than before for P-192 and P-224).
6387 *) New functions/macros
6389 SSL_CTX_set_msg_callback(ctx, cb)
6390 SSL_CTX_set_msg_callback_arg(ctx, arg)
6391 SSL_set_msg_callback(ssl, cb)
6392 SSL_set_msg_callback_arg(ssl, arg)
6394 to request calling a callback function
6396 void cb(int write_p, int version, int content_type,
6397 const void *buf, size_t len, SSL *ssl, void *arg)
6399 whenever a protocol message has been completely received
6400 (write_p == 0) or sent (write_p == 1). Here 'version' is the
6401 protocol version according to which the SSL library interprets
6402 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
6403 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
6404 the content type as defined in the SSL 3.0/TLS 1.0 protocol
6405 specification (change_cipher_spec(20), alert(21), handshake(22)).
6406 'buf' and 'len' point to the actual message, 'ssl' to the
6407 SSL object, and 'arg' is the application-defined value set by
6408 SSL[_CTX]_set_msg_callback_arg().
6410 'openssl s_client' and 'openssl s_server' have new '-msg' options
6411 to enable a callback that displays all protocol messages.
6414 *) Change the shared library support so shared libraries are built as
6415 soon as the corresponding static library is finished, and thereby get
6416 openssl and the test programs linked against the shared library.
6417 This still only happens when the keyword "shard" has been given to
6418 the configuration scripts.
6420 NOTE: shared library support is still an experimental thing, and
6421 backward binary compatibility is still not guaranteed.
6422 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
6424 *) Add support for Subject Information Access extension.
6425 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
6427 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
6428 additional bytes when new memory had to be allocated, not just
6429 when reusing an existing buffer.
6432 *) New command line and configuration option 'utf8' for the req command.
6433 This allows field values to be specified as UTF8 strings.
6436 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
6437 runs for the former and machine-readable output for the latter.
6440 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
6441 of the e-mail address in the DN (i.e., it will go into a certificate
6442 extension only). The new configuration file option 'email_in_dn = no'
6443 has the same effect.
6444 [Massimiliano Pala madwolf@openca.org]
6446 *) Change all functions with names starting with des_ to be starting
6447 with DES_ instead. Add wrappers that are compatible with libdes,
6448 but are named _ossl_old_des_*. Finally, add macros that map the
6449 des_* symbols to the corresponding _ossl_old_des_* if libdes
6450 compatibility is desired. If OpenSSL 0.9.6c compatibility is
6451 desired, the des_* symbols will be mapped to DES_*, with one
6454 Since we provide two compatibility mappings, the user needs to
6455 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
6456 compatibility is desired. The default (i.e., when that macro
6457 isn't defined) is OpenSSL 0.9.6c compatibility.
6459 There are also macros that enable and disable the support of old
6460 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
6461 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
6462 are defined, the default will apply: to support the old des routines.
6464 In either case, one must include openssl/des.h to get the correct
6465 definitions. Do not try to just include openssl/des_old.h, that
6468 NOTE: This is a major break of an old API into a new one. Software
6469 authors are encouraged to switch to the DES_ style functions. Some
6470 time in the future, des_old.h and the libdes compatibility functions
6471 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
6472 default), and then completely removed.
6475 *) Test for certificates which contain unsupported critical extensions.
6476 If such a certificate is found during a verify operation it is
6477 rejected by default: this behaviour can be overridden by either
6478 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
6479 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
6480 X509_supported_extension() has also been added which returns 1 if a
6481 particular extension is supported.
6484 *) Modify the behaviour of EVP cipher functions in similar way to digests
6485 to retain compatibility with existing code.
6488 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
6489 compatibility with existing code. In particular the 'ctx' parameter does
6490 not have to be to be initialized before the call to EVP_DigestInit() and
6491 it is tidied up after a call to EVP_DigestFinal(). New function
6492 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
6493 EVP_MD_CTX_copy() changed to not require the destination to be
6494 initialized valid and new function EVP_MD_CTX_copy_ex() added which
6495 requires the destination to be valid.
6497 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
6498 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
6501 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
6502 so that complete 'Handshake' protocol structures are kept in memory
6503 instead of overwriting 'msg_type' and 'length' with 'body' data.
6506 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
6507 [Massimo Santin via Richard Levitte]
6509 *) Major restructuring to the underlying ENGINE code. This includes
6510 reduction of linker bloat, separation of pure "ENGINE" manipulation
6511 (initialisation, etc) from functionality dealing with implementations
6512 of specific crypto iterfaces. This change also introduces integrated
6513 support for symmetric ciphers and digest implementations - so ENGINEs
6514 can now accelerate these by providing EVP_CIPHER and EVP_MD
6515 implementations of their own. This is detailed in crypto/engine/README
6516 as it couldn't be adequately described here. However, there are a few
6517 API changes worth noting - some RSA, DSA, DH, and RAND functions that
6518 were changed in the original introduction of ENGINE code have now
6519 reverted back - the hooking from this code to ENGINE is now a good
6520 deal more passive and at run-time, operations deal directly with
6521 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
6522 dereferencing through an ENGINE pointer any more. Also, the ENGINE
6523 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
6524 they were not being used by the framework as there is no concept of a
6525 BIGNUM_METHOD and they could not be generalised to the new
6526 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
6527 ENGINE_cpy() has been removed as it cannot be consistently defined in
6531 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
6534 *) Change mkdef.pl to sort symbols that get the same entry number,
6535 and make sure the automatically generated functions ERR_load_*
6536 become part of libeay.num as well.
6539 *) New function SSL_renegotiate_pending(). This returns true once
6540 renegotiation has been requested (either SSL_renegotiate() call
6541 or HelloRequest/ClientHello received from the peer) and becomes
6542 false once a handshake has been completed.
6543 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
6544 sends a HelloRequest, but does not ensure that a handshake takes
6545 place. SSL_renegotiate_pending() is useful for checking if the
6546 client has followed the request.)
6549 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
6550 By default, clients may request session resumption even during
6551 renegotiation (if session ID contexts permit); with this option,
6552 session resumption is possible only in the first handshake.
6554 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
6555 more bits available for options that should not be part of
6556 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
6559 *) Add some demos for certificate and certificate request creation.
6562 *) Make maximum certificate chain size accepted from the peer application
6563 settable (SSL*_get/set_max_cert_list()), as proposed by
6564 "Douglas E. Engert" <deengert@anl.gov>.
6567 *) Add support for shared libraries for Unixware-7
6568 (Boyd Lynn Gerber <gerberb@zenez.com>).
6571 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
6572 be done prior to destruction. Use this to unload error strings from
6573 ENGINEs that load their own error strings. NB: This adds two new API
6574 functions to "get" and "set" this destroy handler in an ENGINE.
6577 *) Alter all existing ENGINE implementations (except "openssl" and
6578 "openbsd") to dynamically instantiate their own error strings. This
6579 makes them more flexible to be built both as statically-linked ENGINEs
6580 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
6581 Also, add stub code to each that makes building them as self-contained
6582 shared-libraries easier (see README.ENGINE).
6585 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
6586 implementations into applications that are completely implemented in
6587 self-contained shared-libraries. The "dynamic" ENGINE exposes control
6588 commands that can be used to configure what shared-library to load and
6589 to control aspects of the way it is handled. Also, made an update to
6590 the README.ENGINE file that brings its information up-to-date and
6591 provides some information and instructions on the "dynamic" ENGINE
6592 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
6595 *) Make it possible to unload ranges of ERR strings with a new
6596 "ERR_unload_strings" function.
6599 *) Add a copy() function to EVP_MD.
6602 *) Make EVP_MD routines take a context pointer instead of just the
6603 md_data void pointer.
6606 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
6607 that the digest can only process a single chunk of data
6608 (typically because it is provided by a piece of
6609 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
6610 is only going to provide a single chunk of data, and hence the
6611 framework needn't accumulate the data for oneshot drivers.
6614 *) As with "ERR", make it possible to replace the underlying "ex_data"
6615 functions. This change also alters the storage and management of global
6616 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
6617 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
6618 index counters. The API functions that use this state have been changed
6619 to take a "class_index" rather than pointers to the class's local STACK
6620 and counter, and there is now an API function to dynamically create new
6621 classes. This centralisation allows us to (a) plug a lot of the
6622 thread-safety problems that existed, and (b) makes it possible to clean
6623 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
6624 such data would previously have always leaked in application code and
6625 workarounds were in place to make the memory debugging turn a blind eye
6626 to it. Application code that doesn't use this new function will still
6627 leak as before, but their memory debugging output will announce it now
6628 rather than letting it slide.
6630 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
6631 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
6632 has a return value to indicate success or failure.
6635 *) Make it possible to replace the underlying "ERR" functions such that the
6636 global state (2 LHASH tables and 2 locks) is only used by the "default"
6637 implementation. This change also adds two functions to "get" and "set"
6638 the implementation prior to it being automatically set the first time
6639 any other ERR function takes place. Ie. an application can call "get",
6640 pass the return value to a module it has just loaded, and that module
6641 can call its own "set" function using that value. This means the
6642 module's "ERR" operations will use (and modify) the error state in the
6643 application and not in its own statically linked copy of OpenSSL code.
6646 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
6647 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
6648 the operation, and provides a more encapsulated way for external code
6649 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
6650 to use these functions rather than manually incrementing the counts.
6652 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
6655 *) Add EVP test program.
6658 *) Add symmetric cipher support to ENGINE. Expect the API to change!
6661 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
6662 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
6663 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
6664 These allow a CRL to be built without having to access X509_CRL fields
6665 directly. Modify 'ca' application to use new functions.
6668 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
6669 bug workarounds. Rollback attack detection is a security feature.
6670 The problem will only arise on OpenSSL servers when TLSv1 is not
6671 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
6672 Software authors not wanting to support TLSv1 will have special reasons
6673 for their choice and can explicitly enable this option.
6674 [Bodo Moeller, Lutz Jaenicke]
6676 *) Rationalise EVP so it can be extended: don't include a union of
6677 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
6678 (similar to those existing for EVP_CIPHER_CTX).
6683 EVP_MD_CTX_init(&md); /* new function call */
6684 EVP_DigestInit(&md, EVP_sha1());
6685 EVP_DigestUpdate(&md, in, len);
6686 EVP_DigestFinal(&md, out, NULL);
6687 EVP_MD_CTX_cleanup(&md); /* new function call */
6691 *) Make DES key schedule conform to the usual scheme, as well as
6692 correcting its structure. This means that calls to DES functions
6693 now have to pass a pointer to a des_key_schedule instead of a
6694 plain des_key_schedule (which was actually always a pointer
6697 des_key_schedule ks;
6699 des_set_key_checked(..., &ks);
6700 des_ncbc_encrypt(..., &ks, ...);
6702 (Note that a later change renames 'des_...' into 'DES_...'.)
6705 *) Initial reduction of linker bloat: the use of some functions, such as
6706 PEM causes large amounts of unused functions to be linked in due to
6707 poor organisation. For example pem_all.c contains every PEM function
6708 which has a knock on effect of linking in large amounts of (unused)
6709 ASN1 code. Grouping together similar functions and splitting unrelated
6710 functions prevents this.
6713 *) Cleanup of EVP macros.
6716 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
6717 correct _ecb suffix.
6720 *) Add initial OCSP responder support to ocsp application. The
6721 revocation information is handled using the text based index
6722 use by the ca application. The responder can either handle
6723 requests generated internally, supplied in files (for example
6724 via a CGI script) or using an internal minimal server.
6727 *) Add configuration choices to get zlib compression for TLS.
6730 *) Changes to Kerberos SSL for RFC 2712 compliance:
6731 1. Implemented real KerberosWrapper, instead of just using
6732 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
6733 2. Implemented optional authenticator field of KerberosWrapper.
6735 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
6736 and authenticator structs; see crypto/krb5/.
6738 Generalized Kerberos calls to support multiple Kerberos libraries.
6739 [Vern Staats <staatsvr@asc.hpc.mil>,
6740 Jeffrey Altman <jaltman@columbia.edu>
6741 via Richard Levitte]
6743 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
6744 already does with RSA. testdsa.h now has 'priv_key/pub_key'
6745 values for each of the key sizes rather than having just
6746 parameters (and 'speed' generating keys each time).
6749 *) Speed up EVP routines.
6752 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
6753 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
6754 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
6755 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
6757 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
6758 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
6759 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
6762 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
6764 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
6767 *) Added the OS2-EMX target.
6768 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
6770 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
6771 to support NCONF routines in extension code. New function CONF_set_nconf()
6772 to allow functions which take an NCONF to also handle the old LHASH
6773 structure: this means that the old CONF compatible routines can be
6774 retained (in particular wrt extensions) without having to duplicate the
6775 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
6778 *) Enhance the general user interface with mechanisms for inner control
6779 and with possibilities to have yes/no kind of prompts.
6782 *) Change all calls to low level digest routines in the library and
6783 applications to use EVP. Add missing calls to HMAC_cleanup() and
6784 don't assume HMAC_CTX can be copied using memcpy().
6785 [Verdon Walker <VWalker@novell.com>, Steve Henson]
6787 *) Add the possibility to control engines through control names but with
6788 arbitrary arguments instead of just a string.
6789 Change the key loaders to take a UI_METHOD instead of a callback
6790 function pointer. NOTE: this breaks binary compatibility with earlier
6791 versions of OpenSSL [engine].
6792 Adapt the nCipher code for these new conditions and add a card insertion
6796 *) Enhance the general user interface with mechanisms to better support
6797 dialog box interfaces, application-defined prompts, the possibility
6798 to use defaults (for example default passwords from somewhere else)
6799 and interrupts/cancellations.
6802 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
6803 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
6806 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
6807 tidy up some unnecessarily weird code in 'sk_new()').
6808 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
6810 *) Change the key loading routines for ENGINEs to use the same kind
6811 callback (pem_password_cb) as all other routines that need this
6815 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
6816 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
6817 than this minimum value is recommended.
6820 *) New random seeder for OpenVMS, using the system process statistics
6821 that are easily reachable.
6824 *) Windows apparently can't transparently handle global
6825 variables defined in DLLs. Initialisations such as:
6827 const ASN1_ITEM *it = &ASN1_INTEGER_it;
6829 won't compile. This is used by the any applications that need to
6830 declare their own ASN1 modules. This was fixed by adding the option
6831 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
6832 needed for static libraries under Win32.
6835 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
6836 setting of purpose and trust fields. New X509_STORE trust and
6837 purpose functions and tidy up setting in other SSL functions.
6840 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
6841 structure. These are inherited by X509_STORE_CTX when it is
6842 initialised. This allows various defaults to be set in the
6843 X509_STORE structure (such as flags for CRL checking and custom
6844 purpose or trust settings) for functions which only use X509_STORE_CTX
6845 internally such as S/MIME.
6847 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
6848 trust settings if they are not set in X509_STORE. This allows X509_STORE
6849 purposes and trust (in S/MIME for example) to override any set by default.
6851 Add command line options for CRL checking to smime, s_client and s_server
6855 *) Initial CRL based revocation checking. If the CRL checking flag(s)
6856 are set then the CRL is looked up in the X509_STORE structure and
6857 its validity and signature checked, then if the certificate is found
6858 in the CRL the verify fails with a revoked error.
6860 Various new CRL related callbacks added to X509_STORE_CTX structure.
6862 Command line options added to 'verify' application to support this.
6864 This needs some additional work, such as being able to handle multiple
6865 CRLs with different times, extension based lookup (rather than just
6866 by subject name) and ultimately more complete V2 CRL extension
6870 *) Add a general user interface API (crypto/ui/). This is designed
6871 to replace things like des_read_password and friends (backward
6872 compatibility functions using this new API are provided).
6873 The purpose is to remove prompting functions from the DES code
6874 section as well as provide for prompting through dialog boxes in
6875 a window system and the like.
6878 *) Add "ex_data" support to ENGINE so implementations can add state at a
6879 per-structure level rather than having to store it globally.
6882 *) Make it possible for ENGINE structures to be copied when retrieved by
6883 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
6884 This causes the "original" ENGINE structure to act like a template,
6885 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
6886 operational state can be localised to each ENGINE structure, despite the
6887 fact they all share the same "methods". New ENGINE structures returned in
6888 this case have no functional references and the return value is the single
6889 structural reference. This matches the single structural reference returned
6890 by ENGINE_by_id() normally, when it is incremented on the pre-existing
6894 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
6895 needs to match any other type at all we need to manually clear the
6899 *) Changes to the "openssl engine" utility to include;
6900 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
6901 about an ENGINE's available control commands.
6902 - executing control commands from command line arguments using the
6903 '-pre' and '-post' switches. '-post' is only used if '-t' is
6904 specified and the ENGINE is successfully initialised. The syntax for
6905 the individual commands are colon-separated, for example;
6906 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
6909 *) New dynamic control command support for ENGINEs. ENGINEs can now
6910 declare their own commands (numbers), names (strings), descriptions,
6911 and input types for run-time discovery by calling applications. A
6912 subset of these commands are implicitly classed as "executable"
6913 depending on their input type, and only these can be invoked through
6914 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
6915 can be based on user input, config files, etc). The distinction is
6916 that "executable" commands cannot return anything other than a boolean
6917 result and can only support numeric or string input, whereas some
6918 discoverable commands may only be for direct use through
6919 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
6920 pointers, or other custom uses. The "executable" commands are to
6921 support parameterisations of ENGINE behaviour that can be
6922 unambiguously defined by ENGINEs and used consistently across any
6923 OpenSSL-based application. Commands have been added to all the
6924 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
6925 control over shared-library paths without source code alterations.
6928 *) Changed all ENGINE implementations to dynamically allocate their
6929 ENGINEs rather than declaring them statically. Apart from this being
6930 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
6931 this also allows the implementations to compile without using the
6932 internal engine_int.h header.
6935 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
6936 'const' value. Any code that should be able to modify a RAND_METHOD
6937 should already have non-const pointers to it (ie. they should only
6938 modify their own ones).
6941 *) Made a variety of little tweaks to the ENGINE code.
6942 - "atalla" and "ubsec" string definitions were moved from header files
6943 to C code. "nuron" string definitions were placed in variables
6944 rather than hard-coded - allowing parameterisation of these values
6945 later on via ctrl() commands.
6946 - Removed unused "#if 0"'d code.
6947 - Fixed engine list iteration code so it uses ENGINE_free() to release
6948 structural references.
6949 - Constified the RAND_METHOD element of ENGINE structures.
6950 - Constified various get/set functions as appropriate and added
6951 missing functions (including a catch-all ENGINE_cpy that duplicates
6952 all ENGINE values onto a new ENGINE except reference counts/state).
6953 - Removed NULL parameter checks in get/set functions. Setting a method
6954 or function to NULL is a way of cancelling out a previously set
6955 value. Passing a NULL ENGINE parameter is just plain stupid anyway
6956 and doesn't justify the extra error symbols and code.
6957 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
6958 flags from engine_int.h to engine.h.
6959 - Changed prototypes for ENGINE handler functions (init(), finish(),
6960 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
6963 *) Implement binary inversion algorithm for BN_mod_inverse in addition
6964 to the algorithm using long division. The binary algorithm can be
6965 used only if the modulus is odd. On 32-bit systems, it is faster
6966 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
6967 roughly 5-15% for 256-bit moduli), so we use it only for moduli
6968 up to 450 bits. In 64-bit environments, the binary algorithm
6969 appears to be advantageous for much longer moduli; here we use it
6970 for moduli up to 2048 bits.
6973 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
6974 could not support the combine flag in choice fields.
6977 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
6978 extensions from a certificate request to the certificate.
6981 *) Allow multiple 'certopt' and 'nameopt' options to be separated
6982 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
6983 file: this allows the display of the certificate about to be
6984 signed to be customised, to allow certain fields to be included
6985 or excluded and extension details. The old system didn't display
6986 multicharacter strings properly, omitted fields not in the policy
6987 and couldn't display additional details such as extensions.
6990 *) Function EC_POINTs_mul for multiple scalar multiplication
6991 of an arbitrary number of elliptic curve points
6992 \sum scalars[i]*points[i],
6993 optionally including the generator defined for the EC_GROUP:
6994 scalar*generator + \sum scalars[i]*points[i].
6996 EC_POINT_mul is a simple wrapper function for the typical case
6997 that the point list has just one item (besides the optional
7001 *) First EC_METHODs for curves over GF(p):
7003 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
7004 operations and provides various method functions that can also
7005 operate with faster implementations of modular arithmetic.
7007 EC_GFp_mont_method() reuses most functions that are part of
7008 EC_GFp_simple_method, but uses Montgomery arithmetic.
7010 [Bodo Moeller; point addition and point doubling
7011 implementation directly derived from source code provided by
7012 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
7014 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
7015 crypto/ec/ec_lib.c):
7017 Curves are EC_GROUP objects (with an optional group generator)
7018 based on EC_METHODs that are built into the library.
7020 Points are EC_POINT objects based on EC_GROUP objects.
7022 Most of the framework would be able to handle curves over arbitrary
7023 finite fields, but as there are no obvious types for fields other
7024 than GF(p), some functions are limited to that for now.
7027 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
7028 that the file contains a complete HTTP response.
7031 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
7032 change the def and num file printf format specifier from "%-40sXXX"
7033 to "%-39s XXX". The latter will always guarantee a space after the
7034 field while the former will cause them to run together if the field
7035 is 40 of more characters long.
7038 *) Constify the cipher and digest 'method' functions and structures
7039 and modify related functions to take constant EVP_MD and EVP_CIPHER
7043 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
7044 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
7047 *) Modify EVP_Digest*() routines so they now return values. Although the
7048 internal software routines can never fail additional hardware versions
7052 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
7054 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
7055 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
7058 ERR_R_NESTED_ASN1_ERROR
7060 ERR_R_MISSING_ASN1_EOS
7061 were 4 .. 9, conflicting with
7062 ERR_LIB_RSA (= ERR_R_RSA_LIB)
7064 ERR_LIB_PEM (= ERR_R_PEM_LIB).
7065 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
7067 Add new error code 'ERR_R_INTERNAL_ERROR'.
7070 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
7074 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
7075 sets the subject name for a new request or supersedes the
7076 subject name in a given request. Formats that can be parsed are
7077 'CN=Some Name, OU=myOU, C=IT'
7079 'CN=Some Name/OU=myOU/C=IT'.
7081 Add options '-batch' and '-verbose' to 'openssl req'.
7082 [Massimiliano Pala <madwolf@hackmasters.net>]
7084 *) Introduce the possibility to access global variables through
7085 functions on platform were that's the best way to handle exporting
7086 global variables in shared libraries. To enable this functionality,
7087 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
7088 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
7089 is normally done by Configure or something similar).
7091 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
7092 in the source file (foo.c) like this:
7094 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
7095 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
7097 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
7098 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
7100 OPENSSL_DECLARE_GLOBAL(int,foo);
7101 #define foo OPENSSL_GLOBAL_REF(foo)
7102 OPENSSL_DECLARE_GLOBAL(double,bar);
7103 #define bar OPENSSL_GLOBAL_REF(bar)
7105 The #defines are very important, and therefore so is including the
7106 header file everywhere where the defined globals are used.
7108 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
7109 of ASN.1 items, but that structure is a bit different.
7111 The largest change is in util/mkdef.pl which has been enhanced with
7112 better and easier to understand logic to choose which symbols should
7113 go into the Windows .def files as well as a number of fixes and code
7114 cleanup (among others, algorithm keywords are now sorted
7115 lexicographically to avoid constant rewrites).
7118 *) In BN_div() keep a copy of the sign of 'num' before writing the
7119 result to 'rm' because if rm==num the value will be overwritten
7120 and produce the wrong result if 'num' is negative: this caused
7121 problems with BN_mod() and BN_nnmod().
7124 *) Function OCSP_request_verify(). This checks the signature on an
7125 OCSP request and verifies the signer certificate. The signer
7126 certificate is just checked for a generic purpose and OCSP request
7130 *) Add OCSP_check_validity() function to check the validity of OCSP
7131 responses. OCSP responses are prepared in real time and may only
7132 be a few seconds old. Simply checking that the current time lies
7133 between thisUpdate and nextUpdate max reject otherwise valid responses
7134 caused by either OCSP responder or client clock inaccuracy. Instead
7135 we allow thisUpdate and nextUpdate to fall within a certain period of
7136 the current time. The age of the response can also optionally be
7137 checked. Two new options -validity_period and -status_age added to
7141 *) If signature or public key algorithm is unrecognized print out its
7142 OID rather that just UNKNOWN.
7145 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
7146 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
7147 ID to be generated from the issuer certificate alone which can then be
7148 passed to OCSP_id_issuer_cmp().
7151 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
7152 ASN1 modules to export functions returning ASN1_ITEM pointers
7153 instead of the ASN1_ITEM structures themselves. This adds several
7154 new macros which allow the underlying ASN1 function/structure to
7155 be accessed transparently. As a result code should not use ASN1_ITEM
7156 references directly (such as &X509_it) but instead use the relevant
7157 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
7158 use of the new ASN1 code on platforms where exporting structures
7159 is problematical (for example in shared libraries) but exporting
7160 functions returning pointers to structures is not.
7163 *) Add support for overriding the generation of SSL/TLS session IDs.
7164 These callbacks can be registered either in an SSL_CTX or per SSL.
7165 The purpose of this is to allow applications to control, if they wish,
7166 the arbitrary values chosen for use as session IDs, particularly as it
7167 can be useful for session caching in multiple-server environments. A
7168 command-line switch for testing this (and any client code that wishes
7169 to use such a feature) has been added to "s_server".
7170 [Geoff Thorpe, Lutz Jaenicke]
7172 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
7173 of the form '#if defined(...) || defined(...) || ...' and
7174 '#if !defined(...) && !defined(...) && ...'. This also avoids
7175 the growing number of special cases it was previously handling.
7178 *) Make all configuration macros available for application by making
7179 sure they are available in opensslconf.h, by giving them names starting
7180 with "OPENSSL_" to avoid conflicts with other packages and by making
7181 sure e_os2.h will cover all platform-specific cases together with
7183 Additionally, it is now possible to define configuration/platform-
7184 specific names (called "system identities"). In the C code, these
7185 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
7186 macro with the name beginning with "OPENSSL_SYS_", which is determined
7187 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
7191 *) New option -set_serial to 'req' and 'x509' this allows the serial
7192 number to use to be specified on the command line. Previously self
7193 signed certificates were hard coded with serial number 0 and the
7194 CA options of 'x509' had to use a serial number in a file which was
7198 *) New options to 'ca' utility to support V2 CRL entry extensions.
7199 Currently CRL reason, invalidity date and hold instruction are
7200 supported. Add new CRL extensions to V3 code and some new objects.
7203 *) New function EVP_CIPHER_CTX_set_padding() this is used to
7204 disable standard block padding (aka PKCS#5 padding) in the EVP
7205 API, which was previously mandatory. This means that the data is
7206 not padded in any way and so the total length much be a multiple
7207 of the block size, otherwise an error occurs.
7210 *) Initial (incomplete) OCSP SSL support.
7213 *) New function OCSP_parse_url(). This splits up a URL into its host,
7214 port and path components: primarily to parse OCSP URLs. New -url
7215 option to ocsp utility.
7218 *) New nonce behavior. The return value of OCSP_check_nonce() now
7219 reflects the various checks performed. Applications can decide
7220 whether to tolerate certain situations such as an absent nonce
7221 in a response when one was present in a request: the ocsp application
7222 just prints out a warning. New function OCSP_add1_basic_nonce()
7223 this is to allow responders to include a nonce in a response even if
7224 the request is nonce-less.
7227 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
7228 skipped when using openssl x509 multiple times on a single input file,
7229 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
7232 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
7233 set string type: to handle setting ASN1_TIME structures. Fix ca
7234 utility to correctly initialize revocation date of CRLs.
7237 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
7238 the clients preferred ciphersuites and rather use its own preferences.
7239 Should help to work around M$ SGC (Server Gated Cryptography) bug in
7240 Internet Explorer by ensuring unchanged hash method during stepup.
7241 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
7244 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
7245 to aes and add a new 'exist' option to print out symbols that don't
7249 *) Additional options to ocsp utility to allow flags to be set and
7250 additional certificates supplied.
7253 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
7254 OCSP client a number of certificate to only verify the response
7258 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
7259 handle the new API. Currently only ECB, CBC modes supported. Add new
7262 Add TLS AES ciphersuites as described in RFC3268, "Advanced
7263 Encryption Standard (AES) Ciphersuites for Transport Layer
7264 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
7265 not enabled by default and were not part of the "ALL" ciphersuite
7266 alias because they were not yet official; they could be
7267 explicitly requested by specifying the "AESdraft" ciphersuite
7268 group alias. In the final release of OpenSSL 0.9.7, the group
7269 alias is called "AES" and is part of "ALL".)
7270 [Ben Laurie, Steve Henson, Bodo Moeller]
7272 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
7273 request to response.
7276 *) Functions for OCSP responders. OCSP_request_onereq_count(),
7277 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
7278 extract information from a certificate request. OCSP_response_create()
7279 creates a response and optionally adds a basic response structure.
7280 OCSP_basic_add1_status() adds a complete single response to a basic
7281 response and returns the OCSP_SINGLERESP structure just added (to allow
7282 extensions to be included for example). OCSP_basic_add1_cert() adds a
7283 certificate to a basic response and OCSP_basic_sign() signs a basic
7284 response with various flags. New helper functions ASN1_TIME_check()
7285 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
7286 (converts ASN1_TIME to GeneralizedTime).
7289 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
7290 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
7291 structure from a certificate. X509_pubkey_digest() digests the public_key
7292 contents: this is used in various key identifiers.
7295 *) Make sk_sort() tolerate a NULL argument.
7296 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
7298 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
7299 passed by the function are trusted implicitly. If any of them signed the
7300 response then it is assumed to be valid and is not verified.
7303 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
7304 to data. This was previously part of the PKCS7 ASN1 code. This
7305 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
7306 [Steve Henson, reported by Kenneth R. Robinette
7307 <support@securenetterm.com>]
7309 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
7310 routines: without these tracing memory leaks is very painful.
7311 Fix leaks in PKCS12 and PKCS7 routines.
7314 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
7315 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
7316 effectively meant GeneralizedTime would never be used. Now it
7317 is initialised to -1 but X509_time_adj() now has to check the value
7318 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
7319 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
7320 [Steve Henson, reported by Kenneth R. Robinette
7321 <support@securenetterm.com>]
7323 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
7324 result in a zero length in the ASN1_INTEGER structure which was
7325 not consistent with the structure when d2i_ASN1_INTEGER() was used
7326 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
7327 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
7328 where it did not print out a minus for negative ASN1_INTEGER.
7331 *) Add summary printout to ocsp utility. The various functions which
7332 convert status values to strings have been renamed to:
7333 OCSP_response_status_str(), OCSP_cert_status_str() and
7334 OCSP_crl_reason_str() and are no longer static. New options
7335 to verify nonce values and to disable verification. OCSP response
7336 printout format cleaned up.
7339 *) Add additional OCSP certificate checks. These are those specified
7340 in RFC2560. This consists of two separate checks: the CA of the
7341 certificate being checked must either be the OCSP signer certificate
7342 or the issuer of the OCSP signer certificate. In the latter case the
7343 OCSP signer certificate must contain the OCSP signing extended key
7344 usage. This check is performed by attempting to match the OCSP
7345 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
7346 in the OCSP_CERTID structures of the response.
7349 *) Initial OCSP certificate verification added to OCSP_basic_verify()
7350 and related routines. This uses the standard OpenSSL certificate
7351 verify routines to perform initial checks (just CA validity) and
7352 to obtain the certificate chain. Then additional checks will be
7353 performed on the chain. Currently the root CA is checked to see
7354 if it is explicitly trusted for OCSP signing. This is used to set
7355 a root CA as a global signing root: that is any certificate that
7356 chains to that CA is an acceptable OCSP signing certificate.
7359 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
7360 extensions from a separate configuration file.
7361 As when reading extensions from the main configuration file,
7362 the '-extensions ...' option may be used for specifying the
7364 [Massimiliano Pala <madwolf@comune.modena.it>]
7366 *) New OCSP utility. Allows OCSP requests to be generated or
7367 read. The request can be sent to a responder and the output
7368 parsed, outputed or printed in text form. Not complete yet:
7369 still needs to check the OCSP response validity.
7372 *) New subcommands for 'openssl ca':
7373 'openssl ca -status <serial>' prints the status of the cert with
7374 the given serial number (according to the index file).
7375 'openssl ca -updatedb' updates the expiry status of certificates
7377 [Massimiliano Pala <madwolf@comune.modena.it>]
7379 *) New '-newreq-nodes' command option to CA.pl. This is like
7380 '-newreq', but calls 'openssl req' with the '-nodes' option
7381 so that the resulting key is not encrypted.
7382 [Damien Miller <djm@mindrot.org>]
7384 *) New configuration for the GNU Hurd.
7385 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
7387 *) Initial code to implement OCSP basic response verify. This
7388 is currently incomplete. Currently just finds the signer's
7389 certificate and verifies the signature on the response.
7392 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
7393 value of OPENSSLDIR. This is available via the new '-d' option
7394 to 'openssl version', and is also included in 'openssl version -a'.
7397 *) Allowing defining memory allocation callbacks that will be given
7398 file name and line number information in additional arguments
7399 (a const char* and an int). The basic functionality remains, as
7400 well as the original possibility to just replace malloc(),
7401 realloc() and free() by functions that do not know about these
7402 additional arguments. To register and find out the current
7403 settings for extended allocation functions, the following
7404 functions are provided:
7406 CRYPTO_set_mem_ex_functions
7407 CRYPTO_set_locked_mem_ex_functions
7408 CRYPTO_get_mem_ex_functions
7409 CRYPTO_get_locked_mem_ex_functions
7411 These work the same way as CRYPTO_set_mem_functions and friends.
7412 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
7413 extended allocation function is enabled.
7414 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
7415 a conventional allocation function is enabled.
7416 [Richard Levitte, Bodo Moeller]
7418 *) Finish off removing the remaining LHASH function pointer casts.
7419 There should no longer be any prototype-casting required when using
7420 the LHASH abstraction, and any casts that remain are "bugs". See
7421 the callback types and macros at the head of lhash.h for details
7422 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
7425 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
7426 If /dev/[u]random devices are not available or do not return enough
7427 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
7429 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
7430 /etc/entropy will be queried once each in this sequence, querying stops
7431 when enough entropy was collected without querying more sockets.
7434 *) Change the Unix RAND_poll() variant to be able to poll several
7435 random devices, as specified by DEVRANDOM, until a sufficient amount
7436 of data has been collected. We spend at most 10 ms on each file
7437 (select timeout) and read in non-blocking mode. DEVRANDOM now
7438 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
7439 (previously it was just the string "/dev/urandom"), so on typical
7440 platforms the 10 ms delay will never occur.
7441 Also separate out the Unix variant to its own file, rand_unix.c.
7442 For VMS, there's a currently-empty rand_vms.c.
7445 *) Move OCSP client related routines to ocsp_cl.c. These
7446 provide utility functions which an application needing
7447 to issue a request to an OCSP responder and analyse the
7448 response will typically need: as opposed to those which an
7449 OCSP responder itself would need which will be added later.
7451 OCSP_request_sign() signs an OCSP request with an API similar
7452 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
7453 response. OCSP_response_get1_basic() extracts basic response
7454 from response. OCSP_resp_find_status(): finds and extracts status
7455 information from an OCSP_CERTID structure (which will be created
7456 when the request structure is built). These are built from lower
7457 level functions which work on OCSP_SINGLERESP structures but
7458 won't normally be used unless the application wishes to examine
7459 extensions in the OCSP response for example.
7461 Replace nonce routines with a pair of functions.
7462 OCSP_request_add1_nonce() adds a nonce value and optionally
7463 generates a random value. OCSP_check_nonce() checks the
7464 validity of the nonce in an OCSP response.
7467 *) Change function OCSP_request_add() to OCSP_request_add0_id().
7468 This doesn't copy the supplied OCSP_CERTID and avoids the
7469 need to free up the newly created id. Change return type
7470 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
7471 This can then be used to add extensions to the request.
7472 Deleted OCSP_request_new(), since most of its functionality
7473 is now in OCSP_REQUEST_new() (and the case insensitive name
7474 clash) apart from the ability to set the request name which
7475 will be added elsewhere.
7478 *) Update OCSP API. Remove obsolete extensions argument from
7479 various functions. Extensions are now handled using the new
7480 OCSP extension code. New simple OCSP HTTP function which
7481 can be used to send requests and parse the response.
7484 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
7485 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
7486 uses the special reorder version of SET OF to sort the attributes
7487 and reorder them to match the encoded order. This resolves a long
7488 standing problem: a verify on a PKCS7 structure just after signing
7489 it used to fail because the attribute order did not match the
7490 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
7491 it uses the received order. This is necessary to tolerate some broken
7492 software that does not order SET OF. This is handled by encoding
7493 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
7494 to produce the required SET OF.
7497 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
7498 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
7499 files to get correct declarations of the ASN.1 item variables.
7502 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
7503 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
7504 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
7505 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
7506 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
7507 ASN1_ITEM and no wrapper functions.
7510 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
7511 replace the old function pointer based I/O routines. Change most of
7512 the *_d2i_bio() and *_d2i_fp() functions to use these.
7515 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
7516 lines, recognice more "algorithms" that can be deselected, and make
7517 it complain about algorithm deselection that isn't recognised.
7520 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
7521 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
7522 to use new functions. Add NO_ASN1_OLD which can be set to remove
7523 some old style ASN1 functions: this can be used to determine if old
7524 code will still work when these eventually go away.
7527 *) New extension functions for OCSP structures, these follow the
7528 same conventions as certificates and CRLs.
7531 *) New function X509V3_add1_i2d(). This automatically encodes and
7532 adds an extension. Its behaviour can be customised with various
7533 flags to append, replace or delete. Various wrappers added for
7534 certificates and CRLs.
7537 *) Fix to avoid calling the underlying ASN1 print routine when
7538 an extension cannot be parsed. Correct a typo in the
7539 OCSP_SERVICELOC extension. Tidy up print OCSP format.
7542 *) Make mkdef.pl parse some of the ASN1 macros and add appropriate
7543 entries for variables.
7546 *) Add functionality to apps/openssl.c for detecting locking
7547 problems: As the program is single-threaded, all we have
7548 to do is register a locking callback using an array for
7549 storing which locks are currently held by the program.
7552 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
7553 SSL_get_ex_data_X509_STORE_idx(), which is used in
7554 ssl_verify_cert_chain() and thus can be called at any time
7555 during TLS/SSL handshakes so that thread-safety is essential.
7556 Unfortunately, the ex_data design is not at all suited
7557 for multi-threaded use, so it probably should be abolished.
7560 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
7561 [Broadcom, tweaked and integrated by Geoff Thorpe]
7563 *) Move common extension printing code to new function
7564 X509V3_print_extensions(). Reorganise OCSP print routines and
7565 implement some needed OCSP ASN1 functions. Add OCSP extensions.
7568 *) New function X509_signature_print() to remove duplication in some
7572 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
7573 set (this was treated exactly the same as SET OF previously). This
7574 is used to reorder the STACK representing the structure to match the
7575 encoding. This will be used to get round a problem where a PKCS7
7576 structure which was signed could not be verified because the STACK
7577 order did not reflect the encoded order.
7580 *) Reimplement the OCSP ASN1 module using the new code.
7583 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
7584 for its ASN1 operations. The old style function pointers still exist
7585 for now but they will eventually go away.
7588 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
7589 completely replaces the old ASN1 functionality with a table driven
7590 encoder and decoder which interprets an ASN1_ITEM structure describing
7591 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
7592 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
7593 has also been converted to the new form.
7596 *) Change BN_mod_exp_recp so that negative moduli are tolerated
7597 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
7598 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
7599 for negative moduli.
7602 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
7603 of not touching the result's sign bit.
7606 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
7610 *) Changed the LHASH code to use prototypes for callbacks, and created
7611 macros to declare and implement thin (optionally static) functions
7612 that provide type-safety and avoid function pointer casting for the
7613 type-specific callbacks.
7616 *) Added Kerberos Cipher Suites to be used with TLS, as written in
7618 [Veers Staats <staatsvr@asc.hpc.mil>,
7619 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
7621 *) Reformat the FAQ so the different questions and answers can be divided
7622 in sections depending on the subject.
7625 *) Have the zlib compression code load ZLIB.DLL dynamically under
7629 *) New function BN_mod_sqrt for computing square roots modulo a prime
7630 (using the probabilistic Tonelli-Shanks algorithm unless
7631 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
7632 be handled deterministically).
7633 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
7635 *) Make BN_mod_inverse faster by explicitly handling small quotients
7636 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
7637 512 bits], about 30% for larger ones [1024 or 2048 bits].)
7640 *) New function BN_kronecker.
7643 *) Fix BN_gcd so that it works on negative inputs; the result is
7644 positive unless both parameters are zero.
7645 Previously something reasonably close to an infinite loop was
7646 possible because numbers could be growing instead of shrinking
7647 in the implementation of Euclid's algorithm.
7650 *) Fix BN_is_word() and BN_is_one() macros to take into account the
7651 sign of the number in question.
7653 Fix BN_is_word(a,w) to work correctly for w == 0.
7655 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
7656 because its test if the absolute value of 'a' equals 'w'.
7657 Note that BN_abs_is_word does *not* handle w == 0 reliably;
7658 it exists mostly for use in the implementations of BN_is_zero(),
7659 BN_is_one(), and BN_is_word().
7662 *) New function BN_swap.
7665 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
7666 the exponentiation functions are more likely to produce reasonable
7667 results on negative inputs.
7670 *) Change BN_mod_mul so that the result is always non-negative.
7671 Previously, it could be negative if one of the factors was negative;
7672 I don't think anyone really wanted that behaviour.
7675 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
7676 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
7677 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
7678 and add new functions:
7687 BN_mod_lshift1_quick
7691 These functions always generate non-negative results.
7693 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
7694 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
7696 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
7697 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
7698 be reduced modulo m.
7699 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
7702 The following entry accidentally appeared in the CHANGES file
7703 distributed with OpenSSL 0.9.7. The modifications described in
7704 it do *not* apply to OpenSSL 0.9.7.
7706 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
7707 was actually never needed) and in BN_mul(). The removal in BN_mul()
7708 required a small change in bn_mul_part_recursive() and the addition
7709 of the functions bn_cmp_part_words(), bn_sub_part_words() and
7710 bn_add_part_words(), which do the same thing as bn_cmp_words(),
7711 bn_sub_words() and bn_add_words() except they take arrays with
7716 *) In 'openssl passwd', verify passwords read from the terminal
7717 unless the '-salt' option is used (which usually means that
7718 verification would just waste user's time since the resulting
7719 hash is going to be compared with some given password hash)
7720 or the new '-noverify' option is used.
7722 This is an incompatible change, but it does not affect
7723 non-interactive use of 'openssl passwd' (passwords on the command
7724 line, '-stdin' option, '-in ...' option) and thus should not
7728 *) Remove all references to RSAref, since there's no more need for it.
7731 *) Make DSO load along a path given through an environment variable
7732 (SHLIB_PATH) with shl_load().
7735 *) Constify the ENGINE code as a result of BIGNUM constification.
7736 Also constify the RSA code and most things related to it. In a
7737 few places, most notable in the depth of the ASN.1 code, ugly
7738 casts back to non-const were required (to be solved at a later
7742 *) Make it so the openssl application has all engines loaded by default.
7745 *) Constify the BIGNUM routines a little more.
7748 *) Add the following functions:
7750 ENGINE_load_cswift()
7752 ENGINE_load_atalla()
7754 ENGINE_load_builtin_engines()
7756 That way, an application can itself choose if external engines that
7757 are built-in in OpenSSL shall ever be used or not. The benefit is
7758 that applications won't have to be linked with libdl or other dso
7759 libraries unless it's really needed.
7761 Changed 'openssl engine' to load all engines on demand.
7762 Changed the engine header files to avoid the duplication of some
7763 declarations (they differed!).
7766 *) 'openssl engine' can now list capabilities.
7769 *) Better error reporting in 'openssl engine'.
7772 *) Never call load_dh_param(NULL) in s_server.
7775 *) Add engine application. It can currently list engines by name and
7776 identity, and test if they are actually available.
7779 *) Improve RPM specification file by forcing symbolic linking and making
7780 sure the installed documentation is also owned by root.root.
7781 [Damien Miller <djm@mindrot.org>]
7783 *) Give the OpenSSL applications more possibilities to make use of
7784 keys (public as well as private) handled by engines.
7787 *) Add OCSP code that comes from CertCo.
7790 *) Add VMS support for the Rijndael code.
7793 *) Added untested support for Nuron crypto accelerator.
7796 *) Add support for external cryptographic devices. This code was
7797 previously distributed separately as the "engine" branch.
7798 [Geoff Thorpe, Richard Levitte]
7800 *) Rework the filename-translation in the DSO code. It is now possible to
7801 have far greater control over how a "name" is turned into a filename
7802 depending on the operating environment and any oddities about the
7803 different shared library filenames on each system.
7806 *) Support threads on FreeBSD-elf in Configure.
7809 *) Fix for SHA1 assembly problem with MASM: it produces
7810 warnings about corrupt line number information when assembling
7811 with debugging information. This is caused by the overlapping
7813 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
7816 NCONF_get_number() has no error checking at all. As a replacement,
7817 NCONF_get_number_e() is defined (_e for "error checking") and is
7818 promoted strongly. The old NCONF_get_number is kept around for
7819 binary backward compatibility.
7820 Make it possible for methods to load from something other than a BIO,
7821 by providing a function pointer that is given a name instead of a BIO.
7822 For example, this could be used to load configuration data from an
7826 *) Fix for non blocking accept BIOs. Added new I/O special reason
7827 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
7828 with non blocking I/O was not possible because no retry code was
7829 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
7833 *) Added the beginnings of Rijndael support.
7836 *) Fix for bug in DirectoryString mask setting. Add support for
7837 X509_NAME_print_ex() in 'req' and X509_print_ex() function
7838 to allow certificate printing to more controllable, additional
7839 'certopt' option to 'x509' to allow new printing options to be
7843 *) Clean old EAY MD5 hack from e_os.h.
7846 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
7848 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
7849 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
7850 [Joe Orton, Steve Henson]
7852 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
7854 *) Fix additional bug revealed by the NISCC test suite:
7856 Stop bug triggering large recursion when presented with
7857 certain ASN.1 tags (CVE-2003-0851)
7860 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
7862 *) Fix various bugs revealed by running the NISCC test suite:
7864 Stop out of bounds reads in the ASN1 code when presented with
7865 invalid tags (CVE-2003-0543 and CVE-2003-0544).
7867 If verify callback ignores invalid public key errors don't try to check
7868 certificate signature with the NULL public key.
7872 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
7873 if the server requested one: as stated in TLS 1.0 and SSL 3.0
7877 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
7878 extra data after the compression methods not only for TLS 1.0
7879 but also for SSL 3.0 (as required by the specification).
7880 [Bodo Moeller; problem pointed out by Matthias Loepfe]
7882 *) Change X509_certificate_type() to mark the key as exported/exportable
7883 when it's 512 *bits* long, not 512 bytes.
7886 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
7888 *) Countermeasure against the Klima-Pokorny-Rosa extension of
7889 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
7890 a protocol version number mismatch like a decryption error
7891 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
7894 *) Turn on RSA blinding by default in the default implementation
7895 to avoid a timing attack. Applications that don't want it can call
7896 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
7897 They would be ill-advised to do so in most cases.
7898 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
7900 *) Change RSA blinding code so that it works when the PRNG is not
7901 seeded (in this case, the secret RSA exponent is abused as
7902 an unpredictable seed -- if it is not unpredictable, there
7903 is no point in blinding anyway). Make RSA blinding thread-safe
7904 by remembering the creator's thread ID in rsa->blinding and
7905 having all other threads use local one-time blinding factors
7906 (this requires more computation than sharing rsa->blinding, but
7907 avoids excessive locking; and if an RSA object is not shared
7908 between threads, blinding will still be very fast).
7911 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
7913 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
7914 via timing by performing a MAC computation even if incorrrect
7915 block cipher padding has been found. This is a countermeasure
7916 against active attacks where the attacker has to distinguish
7917 between bad padding and a MAC verification error. (CVE-2003-0078)
7919 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
7920 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
7921 Martin Vuagnoux (EPFL, Ilion)]
7923 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
7925 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
7926 memory from it's contents. This is done with a counter that will
7927 place alternating values in each byte. This can be used to solve
7928 two issues: 1) the removal of calls to memset() by highly optimizing
7929 compilers, and 2) cleansing with other values than 0, since those can
7930 be read through on certain media, for example a swap space on disk.
7933 *) Bugfix: client side session caching did not work with external caching,
7934 because the session->cipher setting was not restored when reloading
7935 from the external cache. This problem was masked, when
7936 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
7937 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
7940 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
7941 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
7942 [Zeev Lieber <zeev-l@yahoo.com>]
7944 *) Undo an undocumented change introduced in 0.9.6e which caused
7945 repeated calls to OpenSSL_add_all_ciphers() and
7946 OpenSSL_add_all_digests() to be ignored, even after calling
7950 *) Change the default configuration reader to deal with last line not
7951 being properly terminated.
7954 *) Change X509_NAME_cmp() so it applies the special rules on handling
7955 DN values that are of type PrintableString, as well as RDNs of type
7956 emailAddress where the value has the type ia5String.
7957 [stefank@valicert.com via Richard Levitte]
7959 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
7960 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
7961 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
7962 the bitwise-OR of the two for use by the majority of applications
7963 wanting this behaviour, and update the docs. The documented
7964 behaviour and actual behaviour were inconsistent and had been
7965 changing anyway, so this is more a bug-fix than a behavioural
7967 [Geoff Thorpe, diagnosed by Nadav Har'El]
7969 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
7970 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
7973 *) Fix initialization code race conditions in
7974 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
7975 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
7976 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
7977 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
7978 ssl2_get_cipher_by_char(),
7979 ssl3_get_cipher_by_char().
7980 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
7982 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
7983 the cached sessions are flushed, as the remove_cb() might use ex_data
7984 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
7985 (see [openssl.org #212]).
7986 [Geoff Thorpe, Lutz Jaenicke]
7988 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
7989 length, instead of the encoding length to d2i_ASN1_OBJECT.
7992 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
7994 *) [In 0.9.6g-engine release:]
7995 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
7996 [Lynn Gazis <lgazis@rainbow.com>]
7998 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
8000 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
8001 and get fix the header length calculation.
8002 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
8003 Alon Kantor <alonk@checkpoint.com> (and others),
8006 *) Use proper error handling instead of 'assertions' in buffer
8007 overflow checks added in 0.9.6e. This prevents DoS (the
8008 assertions could call abort()).
8009 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
8011 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
8013 *) Add various sanity checks to asn1_get_length() to reject
8014 the ASN1 length bytes if they exceed sizeof(long), will appear
8015 negative or the content length exceeds the length of the
8017 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
8019 *) Fix cipher selection routines: ciphers without encryption had no flags
8020 for the cipher strength set and where therefore not handled correctly
8021 by the selection routines (PR #130).
8024 *) Fix EVP_dsa_sha macro.
8028 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
8029 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
8030 that was added in OpenSSL 0.9.6d.
8032 As the countermeasure turned out to be incompatible with some
8033 broken SSL implementations, the new option is part of SSL_OP_ALL.
8034 SSL_OP_ALL is usually employed when compatibility with weird SSL
8035 implementations is desired (e.g. '-bugs' option to 's_client' and
8036 's_server'), so the new option is automatically set in many
8040 *) Changes in security patch:
8042 Changes marked "(CHATS)" were sponsored by the Defense Advanced
8043 Research Projects Agency (DARPA) and Air Force Research Laboratory,
8044 Air Force Materiel Command, USAF, under agreement number
8047 *) Add various sanity checks to asn1_get_length() to reject
8048 the ASN1 length bytes if they exceed sizeof(long), will appear
8049 negative or the content length exceeds the length of the
8050 supplied buffer. (CVE-2002-0659)
8051 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
8053 *) Assertions for various potential buffer overflows, not known to
8055 [Ben Laurie (CHATS)]
8057 *) Various temporary buffers to hold ASCII versions of integers were
8058 too small for 64 bit platforms. (CVE-2002-0655)
8059 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
8061 *) Remote buffer overflow in SSL3 protocol - an attacker could
8062 supply an oversized session ID to a client. (CVE-2002-0656)
8063 [Ben Laurie (CHATS)]
8065 *) Remote buffer overflow in SSL2 protocol - an attacker could
8066 supply an oversized client master key. (CVE-2002-0656)
8067 [Ben Laurie (CHATS)]
8069 Changes between 0.9.6c and 0.9.6d [9 May 2002]
8071 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
8072 encoded as NULL) with id-dsa-with-sha1.
8073 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
8075 *) Check various X509_...() return values in apps/req.c.
8076 [Nils Larsch <nla@trustcenter.de>]
8078 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
8079 an end-of-file condition would erroneously be flagged, when the CRLF
8080 was just at the end of a processed block. The bug was discovered when
8081 processing data through a buffering memory BIO handing the data to a
8082 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
8083 <ptsekov@syntrex.com> and Nedelcho Stanev.
8086 *) Implement a countermeasure against a vulnerability recently found
8087 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
8088 before application data chunks to avoid the use of known IVs
8089 with data potentially chosen by the attacker.
8092 *) Fix length checks in ssl3_get_client_hello().
8095 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
8096 to prevent ssl3_read_internal() from incorrectly assuming that
8097 ssl3_read_bytes() found application data while handshake
8098 processing was enabled when in fact s->s3->in_read_app_data was
8099 merely automatically cleared during the initial handshake.
8100 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
8102 *) Fix object definitions for Private and Enterprise: they were not
8103 recognized in their shortname (=lowercase) representation. Extend
8104 obj_dat.pl to issue an error when using undefined keywords instead
8105 of silently ignoring the problem (Svenning Sorensen
8106 <sss@sss.dnsalias.net>).
8109 *) Fix DH_generate_parameters() so that it works for 'non-standard'
8110 generators, i.e. generators other than 2 and 5. (Previously, the
8111 code did not properly initialise the 'add' and 'rem' values to
8112 BN_generate_prime().)
8114 In the new general case, we do not insist that 'generator' is
8115 actually a primitive root: This requirement is rather pointless;
8116 a generator of the order-q subgroup is just as good, if not
8120 *) Map new X509 verification errors to alerts. Discovered and submitted by
8121 Tom Wu <tom@arcot.com>.
8124 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
8125 returning non-zero before the data has been completely received
8126 when using non-blocking I/O.
8127 [Bodo Moeller; problem pointed out by John Hughes]
8129 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
8130 [Ben Laurie, Lutz Jaenicke]
8132 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
8133 Yoram Zahavi <YoramZ@gilian.com>).
8136 *) Add information about CygWin 1.3 and on, and preserve proper
8137 configuration for the versions before that.
8138 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
8140 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
8141 check whether we deal with a copy of a session and do not delete from
8142 the cache in this case. Problem reported by "Izhar Shoshani Levi"
8143 <izhar@checkpoint.com>.
8146 *) Do not store session data into the internal session cache, if it
8147 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
8148 flag is set). Proposed by Aslam <aslam@funk.com>.
8151 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
8155 *) [In 0.9.6d-engine release:]
8156 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
8157 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
8159 *) Add the configuration target linux-s390x.
8160 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
8162 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
8163 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
8164 variable as an indication that a ClientHello message has been
8165 received. As the flag value will be lost between multiple
8166 invocations of ssl3_accept when using non-blocking I/O, the
8167 function may not be aware that a handshake has actually taken
8168 place, thus preventing a new session from being added to the
8171 To avoid this problem, we now set s->new_session to 2 instead of
8172 using a local variable.
8173 [Lutz Jaenicke, Bodo Moeller]
8175 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
8176 if the SSL_R_LENGTH_MISMATCH error is detected.
8177 [Geoff Thorpe, Bodo Moeller]
8179 *) New 'shared_ldflag' column in Configure platform table.
8182 *) Fix EVP_CIPHER_mode macro.
8183 ["Dan S. Camper" <dan@bti.net>]
8185 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
8186 type, we must throw them away by setting rr->length to 0.
8187 [D P Chang <dpc@qualys.com>]
8189 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
8191 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
8192 <Dominikus.Scherkl@biodata.com>. (The previous implementation
8193 worked incorrectly for those cases where range = 10..._2 and
8194 3*range is two bits longer than range.)
8197 *) Only add signing time to PKCS7 structures if it is not already
8201 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
8202 OBJ_ld_ce should be OBJ_id_ce.
8203 Also some ip-pda OIDs in crypto/objects/objects.txt were
8204 incorrect (cf. RFC 3039).
8205 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
8207 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
8208 returns early because it has nothing to do.
8209 [Andy Schneider <andy.schneider@bjss.co.uk>]
8211 *) [In 0.9.6c-engine release:]
8212 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
8213 [Andy Schneider <andy.schneider@bjss.co.uk>]
8215 *) [In 0.9.6c-engine release:]
8216 Add support for Cryptographic Appliance's keyserver technology.
8217 (Use engine 'keyclient')
8218 [Cryptographic Appliances and Geoff Thorpe]
8220 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
8221 is called via tools/c89.sh because arguments have to be
8222 rearranged (all '-L' options must appear before the first object
8224 [Richard Shapiro <rshapiro@abinitio.com>]
8226 *) [In 0.9.6c-engine release:]
8227 Add support for Broadcom crypto accelerator cards, backported
8229 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
8231 *) [In 0.9.6c-engine release:]
8232 Add support for SureWare crypto accelerator cards from
8233 Baltimore Technologies. (Use engine 'sureware')
8234 [Baltimore Technologies and Mark Cox]
8236 *) [In 0.9.6c-engine release:]
8237 Add support for crypto accelerator cards from Accelerated
8238 Encryption Processing, www.aep.ie. (Use engine 'aep')
8239 [AEP Inc. and Mark Cox]
8241 *) Add a configuration entry for gcc on UnixWare.
8242 [Gary Benson <gbenson@redhat.com>]
8244 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
8245 messages are stored in a single piece (fixed-length part and
8246 variable-length part combined) and fix various bugs found on the way.
8249 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
8250 instead. BIO_gethostbyname() does not know what timeouts are
8251 appropriate, so entries would stay in cache even when they have
8253 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
8255 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
8256 faced with a pathologically small ClientHello fragment that does
8257 not contain client_version: Instead of aborting with an error,
8258 simply choose the highest available protocol version (i.e.,
8259 TLS 1.0 unless it is disabled). In practice, ClientHello
8260 messages are never sent like this, but this change gives us
8261 strictly correct behaviour at least for TLS.
8264 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
8265 never resets s->method to s->ctx->method when called from within
8266 one of the SSL handshake functions.
8267 [Bodo Moeller; problem pointed out by Niko Baric]
8269 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
8270 (sent using the client's version number) if client_version is
8271 smaller than the protocol version in use. Also change
8272 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
8273 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
8274 the client will at least see that alert.
8277 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
8281 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
8282 client receives HelloRequest while in a handshake.
8283 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
8285 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
8286 should end in 'break', not 'goto end' which circumvents various
8287 cleanups done in state SSL_ST_OK. But session related stuff
8288 must be disabled for SSL_ST_OK in the case that we just sent a
8291 Also avoid some overhead by not calling ssl_init_wbio_buffer()
8292 before just sending a HelloRequest.
8293 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
8295 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
8296 reveal whether illegal block cipher padding was found or a MAC
8297 verification error occurred. (Neither SSLerr() codes nor alerts
8298 are directly visible to potential attackers, but the information
8299 may leak via logfiles.)
8301 Similar changes are not required for the SSL 2.0 implementation
8302 because the number of padding bytes is sent in clear for SSL 2.0,
8303 and the extra bytes are just ignored. However ssl/s2_pkt.c
8304 failed to verify that the purported number of padding bytes is in
8308 *) Add OpenUNIX-8 support including shared libraries
8309 (Boyd Lynn Gerber <gerberb@zenez.com>).
8312 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
8313 'wristwatch attack' using huge encoding parameters (cf.
8314 James H. Manger's CRYPTO 2001 paper). Note that the
8315 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
8316 encoding parameters and hence was not vulnerable.
8319 *) BN_sqr() bug fix.
8320 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
8322 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
8323 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
8324 followed by modular reduction.
8325 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
8327 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
8328 equivalent based on BN_pseudo_rand() instead of BN_rand().
8331 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
8332 This function was broken, as the check for a new client hello message
8333 to handle SGC did not allow these large messages.
8334 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
8337 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
8340 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
8341 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
8344 *) Rework the configuration and shared library support for Tru64 Unix.
8345 The configuration part makes use of modern compiler features and
8346 still retains old compiler behavior for those that run older versions
8347 of the OS. The shared library support part includes a variant that
8348 uses the RPATH feature, and is available through the special
8349 configuration target "alpha-cc-rpath", which will never be selected
8351 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
8353 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
8354 with the same message size as in ssl3_get_certificate_request().
8355 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
8356 messages might inadvertently be reject as too long.
8357 [Petr Lampa <lampa@fee.vutbr.cz>]
8359 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
8362 *) Modified SSL library such that the verify_callback that has been set
8363 specificly for an SSL object with SSL_set_verify() is actually being
8364 used. Before the change, a verify_callback set with this function was
8365 ignored and the verify_callback() set in the SSL_CTX at the time of
8366 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
8367 to allow the necessary settings.
8370 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
8371 explicitly to NULL, as at least on Solaris 8 this seems not always to be
8372 done automatically (in contradiction to the requirements of the C
8373 standard). This made problems when used from OpenSSH.
8376 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
8377 dh->length and always used
8379 BN_rand_range(priv_key, dh->p).
8381 BN_rand_range() is not necessary for Diffie-Hellman, and this
8382 specific range makes Diffie-Hellman unnecessarily inefficient if
8383 dh->length (recommended exponent length) is much smaller than the
8384 length of dh->p. We could use BN_rand_range() if the order of
8385 the subgroup was stored in the DH structure, but we only have
8390 BN_rand(priv_key, l, ...)
8392 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
8398 RSA_eay_public_encrypt
8399 RSA_eay_private_decrypt
8400 RSA_eay_private_encrypt (signing)
8401 RSA_eay_public_decrypt (signature verification)
8403 (default implementations for RSA_public_encrypt,
8404 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
8405 always reject numbers >= n.
8408 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
8409 to synchronize access to 'locking_thread'. This is necessary on
8410 systems where access to 'locking_thread' (an 'unsigned long'
8411 variable) is not atomic.
8414 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
8415 *before* setting the 'crypto_lock_rand' flag. The previous code had
8416 a race condition if 0 is a valid thread ID.
8417 [Travis Vitek <vitek@roguewave.com>]
8419 *) Add support for shared libraries under Irix.
8420 [Albert Chin-A-Young <china@thewrittenword.com>]
8422 *) Add configuration option to build on Linux on both big-endian and
8424 [Ralf Baechle <ralf@uni-koblenz.de>]
8426 *) Add the possibility to create shared libraries on HP-UX.
8429 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
8431 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
8432 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
8433 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
8434 PRNG state recovery was possible based on the output of
8435 one PRNG request appropriately sized to gain knowledge on
8436 'md' followed by enough consecutive 1-byte PRNG requests
8437 to traverse all of 'state'.
8439 1. When updating 'md_local' (the current thread's copy of 'md')
8440 during PRNG output generation, hash all of the previous
8441 'md_local' value, not just the half used for PRNG output.
8443 2. Make the number of bytes from 'state' included into the hash
8444 independent from the number of PRNG bytes requested.
8446 The first measure alone would be sufficient to avoid
8447 Markku-Juhani's attack. (Actually it had never occurred
8448 to me that the half of 'md_local' used for chaining was the
8449 half from which PRNG output bytes were taken -- I had always
8450 assumed that the secret half would be used.) The second
8451 measure makes sure that additional data from 'state' is never
8452 mixed into 'md_local' in small portions; this heuristically
8453 further strengthens the PRNG.
8456 *) Fix crypto/bn/asm/mips3.s.
8459 *) When only the key is given to "enc", the IV is undefined. Print out
8460 an error message in this case.
8463 *) Handle special case when X509_NAME is empty in X509 printing routines.
8466 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
8467 positive and less than q.
8470 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
8471 used: it isn't thread safe and the add_lock_callback should handle
8473 [Paul Rose <Paul.Rose@bridge.com>]
8475 *) Verify that incoming data obeys the block size in
8476 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
8480 [Ulf Möller, Bodo Möller]
8482 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
8483 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
8484 when fixing the server behaviour for backwards-compatible 'client
8485 hello' messages. (Note that the attack is impractical against
8486 SSL 3.0 and TLS 1.0 anyway because length and version checking
8487 means that the probability of guessing a valid ciphertext is
8488 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
8491 Before 0.9.5, the countermeasure (hide the error by generating a
8492 random 'decryption result') did not work properly because
8493 ERR_clear_error() was missing, meaning that SSL_get_error() would
8494 detect the supposedly ignored error.
8496 Both problems are now fixed.
8499 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
8500 (previously it was 1024).
8503 *) Fix for compatibility mode trust settings: ignore trust settings
8504 unless some valid trust or reject settings are present.
8507 *) Fix for blowfish EVP: its a variable length cipher.
8510 *) Fix various bugs related to DSA S/MIME verification. Handle missing
8511 parameters in DSA public key structures and return an error in the
8512 DSA routines if parameters are absent.
8515 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
8516 in the current directory if neither $RANDFILE nor $HOME was set.
8517 RAND_file_name() in 0.9.6a returned NULL in this case. This has
8518 caused some confusion to Windows users who haven't defined $HOME.
8519 Thus RAND_file_name() is changed again: e_os.h can define a
8520 DEFAULT_HOME, which will be used if $HOME is not set.
8521 For Windows, we use "C:"; on other platforms, we still require
8522 environment variables.
8524 *) Move 'if (!initialized) RAND_poll()' into regions protected by
8525 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
8526 having multiple threads call RAND_poll() concurrently.
8529 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
8530 combination of a flag and a thread ID variable.
8531 Otherwise while one thread is in ssleay_rand_bytes (which sets the
8532 flag), *other* threads can enter ssleay_add_bytes without obeying
8533 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
8534 that they do not hold after the first thread unsets add_do_not_lock).
8537 *) Change bctest again: '-x' expressions are not available in all
8541 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
8543 *) Fix a couple of memory leaks in PKCS7_dataDecode()
8544 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
8546 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
8547 the default extension for executables, if any. Also, make the perl
8548 scripts that use symlink() to test if it really exists and use "cp"
8549 if it doesn't. All this made OpenSSL compilable and installable in
8553 *) Fix for asn1_GetSequence() for indefinite length constructed data.
8554 If SEQUENCE is length is indefinite just set c->slen to the total
8555 amount of data available.
8556 [Steve Henson, reported by shige@FreeBSD.org]
8557 [This change does not apply to 0.9.7.]
8559 *) Change bctest to avoid here-documents inside command substitution
8560 (workaround for FreeBSD /bin/sh bug).
8561 For compatibility with Ultrix, avoid shell functions (introduced
8562 in the bctest version that searches along $PATH).
8565 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
8566 with des_encrypt() defined on some operating systems, like Solaris
8570 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
8571 On the Importance of Eliminating Errors in Cryptographic
8572 Computations, J. Cryptology 14 (2001) 2, 101-119,
8573 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
8576 *) MIPS assembler BIGNUM division bug fix.
8579 *) Disabled incorrect Alpha assembler code.
8582 *) Fix PKCS#7 decode routines so they correctly update the length
8583 after reading an EOC for the EXPLICIT tag.
8585 [This change does not apply to 0.9.7.]
8587 *) Fix bug in PKCS#12 key generation routines. This was triggered
8588 if a 3DES key was generated with a 0 initial byte. Include
8589 PKCS12_BROKEN_KEYGEN compilation option to retain the old
8590 (but broken) behaviour.
8593 *) Enhance bctest to search for a working bc along $PATH and print
8595 [Tim Rice <tim@multitalents.net> via Richard Levitte]
8597 *) Fix memory leaks in err.c: free err_data string if necessary;
8598 don't write to the wrong index in ERR_set_error_data.
8601 *) Implement ssl23_peek (analogous to ssl23_read), which previously
8605 *) Replace rdtsc with _emit statements for VC++ version 5.
8606 [Jeremy Cooper <jeremy@baymoo.org>]
8608 *) Make it possible to reuse SSLv2 sessions.
8611 *) In copy_email() check for >= 0 as a return value for
8612 X509_NAME_get_index_by_NID() since 0 is a valid index.
8613 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
8615 *) Avoid coredump with unsupported or invalid public keys by checking if
8616 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
8617 PKCS7_verify() fails with non detached data.
8620 *) Don't use getenv in library functions when run as setuid/setgid.
8621 New function OPENSSL_issetugid().
8624 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
8625 due to incorrect handling of multi-threading:
8627 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
8629 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
8631 3. Count how many times MemCheck_off() has been called so that
8632 nested use can be treated correctly. This also avoids
8633 inband-signalling in the previous code (which relied on the
8634 assumption that thread ID 0 is impossible).
8637 *) Add "-rand" option also to s_client and s_server.
8640 *) Fix CPU detection on Irix 6.x.
8641 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
8642 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
8644 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
8647 [This change does not apply to 0.9.7.]
8649 *) Use the cached encoding of an X509_NAME structure rather than
8650 copying it. This is apparently the reason for the libsafe "errors"
8651 but the code is actually correct.
8654 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
8655 Bleichenbacher's DSA attack.
8656 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
8657 to be set and top=0 forces the highest bit to be set; top=-1 is new
8658 and leaves the highest bit random.
8659 [Ulf Moeller, Bodo Moeller]
8661 *) In the NCONF_...-based implementations for CONF_... queries
8662 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
8663 a temporary CONF structure with the data component set to NULL
8664 (which gives segmentation faults in lh_retrieve).
8665 Instead, use NULL for the CONF pointer in CONF_get_string and
8666 CONF_get_number (which may use environment variables) and directly
8667 return NULL from CONF_get_section.
8670 *) Fix potential buffer overrun for EBCDIC.
8673 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
8674 keyUsage if basicConstraints absent for a CA.
8677 *) Make SMIME_write_PKCS7() write mail header values with a format that
8678 is more generally accepted (no spaces before the semicolon), since
8679 some programs can't parse those values properly otherwise. Also make
8680 sure BIO's that break lines after each write do not create invalid
8684 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
8685 macros previously used would not encode an empty SEQUENCE OF
8686 and break the signature.
8688 [This change does not apply to 0.9.7.]
8690 *) Zero the premaster secret after deriving the master secret in
8694 *) Add some EVP_add_digest_alias registrations (as found in
8695 OpenSSL_add_all_digests()) to SSL_library_init()
8696 aka OpenSSL_add_ssl_algorithms(). This provides improved
8697 compatibility with peers using X.509 certificates
8698 with unconventional AlgorithmIdentifier OIDs.
8701 *) Fix for Irix with NO_ASM.
8702 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
8704 *) ./config script fixes.
8705 [Ulf Moeller, Richard Levitte]
8707 *) Fix 'openssl passwd -1'.
8710 *) Change PKCS12_key_gen_asc() so it can cope with non null
8711 terminated strings whose length is passed in the passlen
8712 parameter, for example from PEM callbacks. This was done
8713 by adding an extra length parameter to asc2uni().
8714 [Steve Henson, reported by <oddissey@samsung.co.kr>]
8716 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
8717 call failed, free the DSA structure.
8720 *) Fix to uni2asc() to cope with zero length Unicode strings.
8721 These are present in some PKCS#12 files.
8724 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
8725 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
8726 when writing a 32767 byte record.
8727 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
8729 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
8730 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
8732 (RSA objects have a reference count access to which is protected
8733 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
8734 so they are meant to be shared between threads.)
8735 [Bodo Moeller, Geoff Thorpe; original patch submitted by
8736 "Reddie, Steven" <Steven.Reddie@ca.com>]
8738 *) Fix a deadlock in CRYPTO_mem_leaks().
8741 *) Use better test patterns in bntest.
8744 *) rand_win.c fix for Borland C.
8747 *) BN_rshift bugfix for n == 0.
8750 *) Add a 'bctest' script that checks for some known 'bc' bugs
8751 so that 'make test' does not abort just because 'bc' is broken.
8754 *) Store verify_result within SSL_SESSION also for client side to
8755 avoid potential security hole. (Re-used sessions on the client side
8756 always resulted in verify_result==X509_V_OK, not using the original
8757 result of the server certificate verification.)
8760 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
8761 SSL3_RT_APPLICATION_DATA, return 0.
8762 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
8766 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
8767 releases, have been re-implemented by renaming the previous
8768 implementations of ssl2_read and ssl3_read to ssl2_read_internal
8769 and ssl3_read_internal, respectively, and adding 'peek' parameters
8770 to them. The new ssl[23]_{read,peek} functions are calls to
8771 ssl[23]_read_internal with the 'peek' flag set appropriately.
8772 A 'peek' parameter has also been added to ssl3_read_bytes, which
8773 does the actual work for ssl3_read_internal.
8776 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
8777 the method-specific "init()" handler. Also clean up ex_data after
8778 calling the method-specific "finish()" handler. Previously, this was
8779 happening the other way round.
8782 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
8783 The previous value, 12, was not always sufficient for BN_mod_exp().
8786 *) Make sure that shared libraries get the internal name engine with
8787 the full version number and not just 0. This should mark the
8788 shared libraries as not backward compatible. Of course, this should
8789 be changed again when we can guarantee backward binary compatibility.
8792 *) Fix typo in get_cert_by_subject() in by_dir.c
8793 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
8795 *) Rework the system to generate shared libraries:
8797 - Make note of the expected extension for the shared libraries and
8798 if there is a need for symbolic links from for example libcrypto.so.0
8799 to libcrypto.so.0.9.7. There is extended info in Configure for
8802 - Make as few rebuilds of the shared libraries as possible.
8804 - Still avoid linking the OpenSSL programs with the shared libraries.
8806 - When installing, install the shared libraries separately from the
8810 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
8812 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
8813 and not in SSL_clear because the latter is also used by the
8814 accept/connect functions; previously, the settings made by
8815 SSL_set_read_ahead would be lost during the handshake.
8816 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
8818 *) Correct util/mkdef.pl to be selective about disabled algorithms.
8819 Previously, it would create entries for disabled algorithms no
8823 *) Added several new manual pages for SSL_* function.
8826 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
8828 *) In ssl23_get_client_hello, generate an error message when faced
8829 with an initial SSL 3.0/TLS record that is too small to contain the
8830 first two bytes of the ClientHello message, i.e. client_version.
8831 (Note that this is a pathologic case that probably has never happened
8832 in real life.) The previous approach was to use the version number
8833 from the record header as a substitute; but our protocol choice
8834 should not depend on that one because it is not authenticated
8835 by the Finished messages.
8838 *) More robust randomness gathering functions for Windows.
8839 [Jeffrey Altman <jaltman@columbia.edu>]
8841 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
8842 not set then we don't setup the error code for issuer check errors
8843 to avoid possibly overwriting other errors which the callback does
8844 handle. If an application does set the flag then we assume it knows
8845 what it is doing and can handle the new informational codes
8849 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
8850 a general "ANY" type, as such it should be able to decode anything
8851 including tagged types. However it didn't check the class so it would
8852 wrongly interpret tagged types in the same way as their universal
8853 counterpart and unknown types were just rejected. Changed so that the
8854 tagged and unknown types are handled in the same way as a SEQUENCE:
8855 that is the encoding is stored intact. There is also a new type
8856 "V_ASN1_OTHER" which is used when the class is not universal, in this
8857 case we have no idea what the actual type is so we just lump them all
8861 *) On VMS, stdout may very well lead to a file that is written to
8862 in a record-oriented fashion. That means that every write() will
8863 write a separate record, which will be read separately by the
8864 programs trying to read from it. This can be very confusing.
8866 The solution is to put a BIO filter in the way that will buffer
8867 text until a linefeed is reached, and then write everything a
8868 line at a time, so every record written will be an actual line,
8869 not chunks of lines and not (usually doesn't happen, but I've
8870 seen it once) several lines in one record. BIO_f_linebuffer() is
8873 Currently, it's a VMS-only method, because that's where it has
8874 been tested well enough.
8877 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
8878 it can return incorrect results.
8879 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
8880 but it was in 0.9.6-beta[12].)
8883 *) Disable the check for content being present when verifying detached
8884 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
8885 include zero length content when signing messages.
8888 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
8889 BIO_ctrl (for BIO pairs).
8892 *) Add DSO method for VMS.
8895 *) Bug fix: Montgomery multiplication could produce results with the
8899 *) Add RPM specification openssl.spec and modify it to build three
8900 packages. The default package contains applications, application
8901 documentation and run-time libraries. The devel package contains
8902 include files, static libraries and function documentation. The
8903 doc package contains the contents of the doc directory. The original
8904 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
8907 *) Add a large number of documentation files for many SSL routines.
8908 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
8910 *) Add a configuration entry for Sony News 4.
8911 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
8913 *) Don't set the two most significant bits to one when generating a
8914 random number < q in the DSA library.
8917 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
8918 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
8919 the underlying transport is blocking) if a handshake took place.
8920 (The default behaviour is needed by applications such as s_client
8921 and s_server that use select() to determine when to use SSL_read;
8922 but for applications that know in advance when to expect data, it
8923 just makes things more complicated.)
8926 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
8930 *) Add a few more EBCDIC conditionals that make `req' and `x509'
8931 work better on such systems.
8932 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
8934 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
8935 Update PKCS12_parse() so it copies the friendlyName and the
8936 keyid to the certificates aux info.
8939 *) Fix bug in PKCS7_verify() which caused an infinite loop
8940 if there was more than one signature.
8941 [Sven Uszpelkat <su@celocom.de>]
8943 *) Major change in util/mkdef.pl to include extra information
8944 about each symbol, as well as presenting variables as well
8945 as functions. This change means that there's n more need
8946 to rebuild the .num files when some algorithms are excluded.
8949 *) Allow the verify time to be set by an application,
8950 rather than always using the current time.
8953 *) Phase 2 verify code reorganisation. The certificate
8954 verify code now looks up an issuer certificate by a
8955 number of criteria: subject name, authority key id
8956 and key usage. It also verifies self signed certificates
8957 by the same criteria. The main comparison function is
8958 X509_check_issued() which performs these checks.
8960 Lot of changes were necessary in order to support this
8961 without completely rewriting the lookup code.
8963 Authority and subject key identifier are now cached.
8965 The LHASH 'certs' is X509_STORE has now been replaced
8966 by a STACK_OF(X509_OBJECT). This is mainly because an
8967 LHASH can't store or retrieve multiple objects with
8968 the same hash value.
8970 As a result various functions (which were all internal
8971 use only) have changed to handle the new X509_STORE
8972 structure. This will break anything that messed round
8973 with X509_STORE internally.
8975 The functions X509_STORE_add_cert() now checks for an
8976 exact match, rather than just subject name.
8978 The X509_STORE API doesn't directly support the retrieval
8979 of multiple certificates matching a given criteria, however
8980 this can be worked round by performing a lookup first
8981 (which will fill the cache with candidate certificates)
8982 and then examining the cache for matches. This is probably
8983 the best we can do without throwing out X509_LOOKUP
8984 entirely (maybe later...).
8986 The X509_VERIFY_CTX structure has been enhanced considerably.
8988 All certificate lookup operations now go via a get_issuer()
8989 callback. Although this currently uses an X509_STORE it
8990 can be replaced by custom lookups. This is a simple way
8991 to bypass the X509_STORE hackery necessary to make this
8992 work and makes it possible to use more efficient techniques
8993 in future. A very simple version which uses a simple
8994 STACK for its trusted certificate store is also provided
8995 using X509_STORE_CTX_trusted_stack().
8997 The verify_cb() and verify() callbacks now have equivalents
8998 in the X509_STORE_CTX structure.
9000 X509_STORE_CTX also has a 'flags' field which can be used
9001 to customise the verify behaviour.
9004 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
9005 excludes S/MIME capabilities.
9008 *) When a certificate request is read in keep a copy of the
9009 original encoding of the signed data and use it when outputting
9010 again. Signatures then use the original encoding rather than
9011 a decoded, encoded version which may cause problems if the
9012 request is improperly encoded.
9015 *) For consistency with other BIO_puts implementations, call
9016 buffer_write(b, ...) directly in buffer_puts instead of calling
9019 In BIO_puts, increment b->num_write as in BIO_write.
9020 [Peter.Sylvester@EdelWeb.fr]
9022 *) Fix BN_mul_word for the case where the word is 0. (We have to use
9023 BN_zero, we may not return a BIGNUM with an array consisting of
9027 *) Avoid calling abort() from within the library when problems are
9028 detected, except if preprocessor symbols have been defined
9029 (such as REF_CHECK, BN_DEBUG etc.).
9032 *) New openssl application 'rsautl'. This utility can be
9033 used for low level RSA operations. DER public key
9034 BIO/fp routines also added.
9037 *) New Configure entry and patches for compiling on QNX 4.
9038 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
9040 *) A demo state-machine implementation was sponsored by
9041 Nuron (http://www.nuron.com/) and is now available in
9042 demos/state_machine.
9045 *) New options added to the 'dgst' utility for signature
9046 generation and verification.
9049 *) Unrecognized PKCS#7 content types are now handled via a
9050 catch all ASN1_TYPE structure. This allows unsupported
9051 types to be stored as a "blob" and an application can
9052 encode and decode it manually.
9055 *) Fix various signed/unsigned issues to make a_strex.c
9057 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
9059 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
9060 length if passed a buffer. ASN1_INTEGER_to_BN failed
9061 if passed a NULL BN and its argument was negative.
9062 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
9064 *) Modification to PKCS#7 encoding routines to output definite
9065 length encoding. Since currently the whole structures are in
9066 memory there's not real point in using indefinite length
9067 constructed encoding. However if OpenSSL is compiled with
9068 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
9071 *) Added BIO_vprintf() and BIO_vsnprintf().
9074 *) Added more prefixes to parse for in the the strings written
9075 through a logging bio, to cover all the levels that are available
9076 through syslog. The prefixes are now:
9078 PANIC, EMERG, EMR => LOG_EMERG
9079 ALERT, ALR => LOG_ALERT
9080 CRIT, CRI => LOG_CRIT
9081 ERROR, ERR => LOG_ERR
9082 WARNING, WARN, WAR => LOG_WARNING
9083 NOTICE, NOTE, NOT => LOG_NOTICE
9084 INFO, INF => LOG_INFO
9085 DEBUG, DBG => LOG_DEBUG
9087 and as before, if none of those prefixes are present at the
9088 beginning of the string, LOG_ERR is chosen.
9090 On Win32, the LOG_* levels are mapped according to this:
9092 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
9093 LOG_WARNING => EVENTLOG_WARNING_TYPE
9094 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
9098 *) Made it possible to reconfigure with just the configuration
9099 argument "reconf" or "reconfigure". The command line arguments
9100 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
9101 and are retrieved from there when reconfiguring.
9105 [Assar Westerlund <assar@sics.se>, Richard Levitte]
9107 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
9110 *) The obj_dat.pl script was messing up the sorting of object
9111 names. The reason was that it compared the quoted version
9112 of strings as a result "OCSP" > "OCSP Signing" because
9113 " > SPACE. Changed script to store unquoted versions of
9114 names and add quotes on output. It was also omitting some
9115 names from the lookup table if they were given a default
9116 value (that is if SN is missing it is given the same
9117 value as LN and vice versa), these are now added on the
9118 grounds that if an object has a name we should be able to
9119 look it up. Finally added warning output when duplicate
9120 short or long names are found.
9123 *) Changes needed for Tandem NSK.
9124 [Scott Uroff <scott@xypro.com>]
9126 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
9127 RSA_padding_check_SSLv23(), special padding was never detected
9128 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
9129 version rollback attacks was not effective.
9131 In s23_clnt.c, don't use special rollback-attack detection padding
9132 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
9133 client; similarly, in s23_srvr.c, don't do the rollback check if
9134 SSL 2.0 is the only protocol enabled in the server.
9137 *) Make it possible to get hexdumps of unprintable data with 'openssl
9138 asn1parse'. By implication, the functions ASN1_parse_dump() and
9139 BIO_dump_indent() are added.
9142 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
9143 these print out strings and name structures based on various
9144 flags including RFC2253 support and proper handling of
9145 multibyte characters. Added options to the 'x509' utility
9146 to allow the various flags to be set.
9149 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
9150 Also change the functions X509_cmp_current_time() and
9151 X509_gmtime_adj() work with an ASN1_TIME structure,
9152 this will enable certificates using GeneralizedTime in validity
9153 dates to be checked.
9156 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
9157 negative public key encodings) on by default,
9158 NO_NEG_PUBKEY_BUG can be set to disable it.
9161 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
9162 content octets. An i2c_ASN1_OBJECT is unnecessary because
9163 the encoding can be trivially obtained from the structure.
9166 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
9167 not read locks (CRYPTO_r_[un]lock).
9170 *) A first attempt at creating official support for shared
9171 libraries through configuration. I've kept it so the
9172 default is static libraries only, and the OpenSSL programs
9173 are always statically linked for now, but there are
9174 preparations for dynamic linking in place.
9175 This has been tested on Linux and Tru64.
9178 *) Randomness polling function for Win9x, as described in:
9179 Peter Gutmann, Software Generation of Practically Strong
9183 *) Fix so PRNG is seeded in req if using an already existing
9187 *) New options to smime application. -inform and -outform
9188 allow alternative formats for the S/MIME message including
9189 PEM and DER. The -content option allows the content to be
9190 specified separately. This should allow things like Netscape
9191 form signing output easier to verify.
9194 *) Fix the ASN1 encoding of tags using the 'long form'.
9197 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
9198 STRING types. These convert content octets to and from the
9199 underlying type. The actual tag and length octets are
9200 already assumed to have been read in and checked. These
9201 are needed because all other string types have virtually
9202 identical handling apart from the tag. By having versions
9203 of the ASN1 functions that just operate on content octets
9204 IMPLICIT tagging can be handled properly. It also allows
9205 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
9206 and ASN1_INTEGER are identical apart from the tag.
9209 *) Change the handling of OID objects as follows:
9211 - New object identifiers are inserted in objects.txt, following
9212 the syntax given in objects.README.
9213 - objects.pl is used to process obj_mac.num and create a new
9215 - obj_dat.pl is used to create a new obj_dat.h, using the data in
9218 This is currently kind of a hack, and the perl code in objects.pl
9219 isn't very elegant, but it works as I intended. The simplest way
9220 to check that it worked correctly is to look in obj_dat.h and
9221 check the array nid_objs and make sure the objects haven't moved
9222 around (this is important!). Additions are OK, as well as
9223 consistent name changes.
9226 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
9229 *) Addition of the command line parameter '-rand file' to 'openssl req'.
9230 The given file adds to whatever has already been seeded into the
9231 random pool through the RANDFILE configuration file option or
9232 environment variable, or the default random state file.
9235 *) mkstack.pl now sorts each macro group into lexical order.
9236 Previously the output order depended on the order the files
9237 appeared in the directory, resulting in needless rewriting
9241 *) Patches to make OpenSSL compile under Win32 again. Mostly
9242 work arounds for the VC++ problem that it treats func() as
9243 func(void). Also stripped out the parts of mkdef.pl that
9244 added extra typesafe functions: these no longer exist.
9247 *) Reorganisation of the stack code. The macros are now all
9248 collected in safestack.h . Each macro is defined in terms of
9249 a "stack macro" of the form SKM_<name>(type, a, b). The
9250 DEBUG_SAFESTACK is now handled in terms of function casts,
9251 this has the advantage of retaining type safety without the
9252 use of additional functions. If DEBUG_SAFESTACK is not defined
9253 then the non typesafe macros are used instead. Also modified the
9254 mkstack.pl script to handle the new form. Needs testing to see
9255 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
9256 the default if no major problems. Similar behaviour for ASN1_SET_OF
9257 and PKCS12_STACK_OF.
9260 *) When some versions of IIS use the 'NET' form of private key the
9261 key derivation algorithm is different. Normally MD5(password) is
9262 used as a 128 bit RC4 key. In the modified case
9263 MD5(MD5(password) + "SGCKEYSALT") is used instead. Added some
9264 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
9265 as the old Netscape_RSA functions except they have an additional
9266 'sgckey' parameter which uses the modified algorithm. Also added
9267 an -sgckey command line option to the rsa utility. Thanks to
9268 Adrian Peck <bertie@ncipher.com> for posting details of the modified
9269 algorithm to openssl-dev.
9272 *) The evp_local.h macros were using 'c.##kname' which resulted in
9273 invalid expansion on some systems (SCO 5.0.5 for example).
9274 Corrected to 'c.kname'.
9275 [Phillip Porch <root@theporch.com>]
9277 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
9278 a STACK of email addresses from a certificate or request, these look
9279 in the subject name and the subject alternative name extensions and
9280 omit any duplicate addresses.
9283 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
9284 This makes DSA verification about 2 % faster.
9287 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
9288 (meaning that now 2^5 values will be precomputed, which is only 4 KB
9289 plus overhead for 1024 bit moduli).
9290 This makes exponentiations about 0.5 % faster for 1024 bit
9291 exponents (as measured by "openssl speed rsa2048").
9294 *) Rename memory handling macros to avoid conflicts with other
9296 Malloc => OPENSSL_malloc
9297 Malloc_locked => OPENSSL_malloc_locked
9298 Realloc => OPENSSL_realloc
9299 Free => OPENSSL_free
9302 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
9303 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
9306 *) CygWin32 support.
9307 [John Jarvie <jjarvie@newsguy.com>]
9309 *) The type-safe stack code has been rejigged. It is now only compiled
9310 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
9311 by default all type-specific stack functions are "#define"d back to
9312 standard stack functions. This results in more streamlined output
9313 but retains the type-safety checking possibilities of the original
9317 *) The STACK code has been cleaned up, and certain type declarations
9318 that didn't make a lot of sense have been brought in line. This has
9319 also involved a cleanup of sorts in safestack.h to more correctly
9320 map type-safe stack functions onto their plain stack counterparts.
9321 This work has also resulted in a variety of "const"ifications of
9322 lots of the code, especially "_cmp" operations which should normally
9323 be prototyped with "const" parameters anyway.
9326 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
9327 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
9328 (The PRNG state consists of two parts, the large pool 'state' and 'md',
9329 where all of 'md' is used each time the PRNG is used, but 'state'
9330 is used only indexed by a cyclic counter. As entropy may not be
9331 well distributed from the beginning, 'md' is important as a
9332 chaining variable. However, the output function chains only half
9333 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
9334 all of 'md', and seeding with STATE_SIZE dummy bytes will result
9335 in all of 'state' being rewritten, with the new values depending
9336 on virtually all of 'md'. This overcomes the 80 bit limitation.)
9339 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
9340 the handshake is continued after ssl_verify_cert_chain();
9341 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
9342 can lead to 'unexplainable' connection aborts later.
9343 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
9345 *) Major EVP API cipher revision.
9346 Add hooks for extra EVP features. This allows various cipher
9347 parameters to be set in the EVP interface. Support added for variable
9348 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
9349 setting of RC2 and RC5 parameters.
9351 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
9354 Remove lots of duplicated code from the EVP library. For example *every*
9355 cipher init() function handles the 'iv' in the same way according to the
9356 cipher mode. They also all do nothing if the 'key' parameter is NULL and
9357 for CFB and OFB modes they zero ctx->num.
9359 New functionality allows removal of S/MIME code RC2 hack.
9361 Most of the routines have the same form and so can be declared in terms
9364 By shifting this to the top level EVP_CipherInit() it can be removed from
9365 all individual ciphers. If the cipher wants to handle IVs or keys
9366 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
9369 Change lots of functions like EVP_EncryptUpdate() to now return a
9370 value: although software versions of the algorithms cannot fail
9371 any installed hardware versions can.
9374 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
9375 this option is set, tolerate broken clients that send the negotiated
9376 protocol version number instead of the requested protocol version
9380 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
9381 i.e. non-zero for export ciphersuites, zero otherwise.
9382 Previous versions had this flag inverted, inconsistent with
9383 rsa_tmp_cb (..._TMP_RSA_CB).
9384 [Bodo Moeller; problem reported by Amit Chopra]
9386 *) Add missing DSA library text string. Work around for some IIS
9387 key files with invalid SEQUENCE encoding.
9390 *) Add a document (doc/standards.txt) that list all kinds of standards
9391 and so on that are implemented in OpenSSL.
9394 *) Enhance c_rehash script. Old version would mishandle certificates
9395 with the same subject name hash and wouldn't handle CRLs at all.
9396 Added -fingerprint option to crl utility, to support new c_rehash
9400 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
9403 *) Fix for SSL server purpose checking. Server checking was
9404 rejecting certificates which had extended key usage present
9405 but no ssl client purpose.
9406 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
9408 *) Make PKCS#12 code work with no password. The PKCS#12 spec
9409 is a little unclear about how a blank password is handled.
9410 Since the password in encoded as a BMPString with terminating
9411 double NULL a zero length password would end up as just the
9412 double NULL. However no password at all is different and is
9413 handled differently in the PKCS#12 key generation code. NS
9414 treats a blank password as zero length. MSIE treats it as no
9415 password on export: but it will try both on import. We now do
9416 the same: PKCS12_parse() tries zero length and no password if
9417 the password is set to "" or NULL (NULL is now a valid password:
9418 it wasn't before) as does the pkcs12 application.
9421 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
9422 perror when PEM_read_bio_X509_REQ fails, the error message must
9423 be obtained from the error queue.
9426 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
9427 it in ERR_remove_state if appropriate, and change ERR_get_state
9428 accordingly to avoid race conditions (this is necessary because
9429 thread_hash is no longer constant once set).
9432 *) Bugfix for linux-elf makefile.one.
9435 *) RSA_get_default_method() will now cause a default
9436 RSA_METHOD to be chosen if one doesn't exist already.
9437 Previously this was only set during a call to RSA_new()
9438 or RSA_new_method(NULL) meaning it was possible for
9439 RSA_get_default_method() to return NULL.
9442 *) Added native name translation to the existing DSO code
9443 that will convert (if the flag to do so is set) filenames
9444 that are sufficiently small and have no path information
9445 into a canonical native form. Eg. "blah" converted to
9446 "libblah.so" or "blah.dll" etc.
9449 *) New function ERR_error_string_n(e, buf, len) which is like
9450 ERR_error_string(e, buf), but writes at most 'len' bytes
9451 including the 0 terminator. For ERR_error_string_n, 'buf'
9453 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
9455 *) CONF library reworked to become more general. A new CONF
9456 configuration file reader "class" is implemented as well as a
9457 new functions (NCONF_*, for "New CONF") to handle it. The now
9458 old CONF_* functions are still there, but are reimplemented to
9459 work in terms of the new functions. Also, a set of functions
9460 to handle the internal storage of the configuration data is
9461 provided to make it easier to write new configuration file
9462 reader "classes" (I can definitely see something reading a
9463 configuration file in XML format, for example), called _CONF_*,
9464 or "the configuration storage API"...
9466 The new configuration file reading functions are:
9468 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
9469 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
9471 NCONF_default, NCONF_WIN32
9473 NCONF_dump_fp, NCONF_dump_bio
9475 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
9476 NCONF_new creates a new CONF object. This works in the same way
9477 as other interfaces in OpenSSL, like the BIO interface.
9478 NCONF_dump_* dump the internal storage of the configuration file,
9479 which is useful for debugging. All other functions take the same
9480 arguments as the old CONF_* functions wth the exception of the
9481 first that must be a `CONF *' instead of a `LHASH *'.
9483 To make it easer to use the new classes with the old CONF_* functions,
9484 the function CONF_set_default_method is provided.
9487 *) Add '-tls1' option to 'openssl ciphers', which was already
9488 mentioned in the documentation but had not been implemented.
9489 (This option is not yet really useful because even the additional
9490 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
9493 *) Initial DSO code added into libcrypto for letting OpenSSL (and
9494 OpenSSL-based applications) load shared libraries and bind to
9495 them in a portable way.
9496 [Geoff Thorpe, with contributions from Richard Levitte]
9498 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
9500 *) Make sure _lrotl and _lrotr are only used with MSVC.
9502 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
9503 (the default implementation of RAND_status).
9505 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
9506 to '-clrext' (= clear extensions), as intended and documented.
9507 [Bodo Moeller; inconsistency pointed out by Michael Attili
9510 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
9511 was larger than the MD block size.
9512 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
9514 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
9515 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
9516 using the passed key: if the passed key was a private key the result
9517 of X509_print(), for example, would be to print out all the private key
9521 *) des_quad_cksum() byte order bug fix.
9522 [Ulf Möller, using the problem description in krb4-0.9.7, where
9523 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
9525 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
9527 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
9529 *) For easily testing in shell scripts whether some command
9530 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
9531 returns with exit code 0 iff no command of the given name is available.
9532 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
9533 the output goes to stdout and nothing is printed to stderr.
9534 Additional arguments are always ignored.
9536 Since for each cipher there is a command of the same name,
9537 the 'no-cipher' compilation switches can be tested this way.
9539 ('openssl no-XXX' is not able to detect pseudo-commands such
9540 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
9543 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
9546 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
9547 is set; it will be thrown away anyway because each handshake creates
9549 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
9550 to parameters -- in previous versions (since OpenSSL 0.9.3) the
9551 'default key' from SSL_CTX_set_tmp_dh would always be lost, meaning
9552 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
9555 *) New s_client option -ign_eof: EOF at stdin is ignored, and
9556 'Q' and 'R' lose their special meanings (quit/renegotiate).
9557 This is part of what -quiet does; unlike -quiet, -ign_eof
9558 does not suppress any output.
9561 *) Add compatibility options to the purpose and trust code. The
9562 purpose X509_PURPOSE_ANY is "any purpose" which automatically
9563 accepts a certificate or CA, this was the previous behaviour,
9564 with all the associated security issues.
9566 X509_TRUST_COMPAT is the old trust behaviour: only and
9567 automatically trust self signed roots in certificate store. A
9568 new trust setting X509_TRUST_DEFAULT is used to specify that
9569 a purpose has no associated trust setting and it should instead
9570 use the value in the default purpose.
9573 *) Fix the PKCS#8 DSA private key code so it decodes keys again
9574 and fix a memory leak.
9577 *) In util/mkerr.pl (which implements 'make errors'), preserve
9578 reason strings from the previous version of the .c file, as
9579 the default to have only downcase letters (and digits) in
9580 automatically generated reasons codes is not always appropriate.
9583 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
9584 using strerror. Previously, ERR_reason_error_string() returned
9585 library names as reason strings for SYSerr; but SYSerr is a special
9586 case where small numbers are errno values, not library numbers.
9589 *) Add '-dsaparam' option to 'openssl dhparam' application. This
9590 converts DSA parameters into DH parameters. (When creating parameters,
9591 DSA_generate_parameters is used.)
9594 *) Include 'length' (recommended exponent length) in C code generated
9595 by 'openssl dhparam -C'.
9598 *) The second argument to set_label in perlasm was already being used
9599 so couldn't be used as a "file scope" flag. Moved to third argument
9603 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
9604 instead of RAND_bytes for encryption IVs and salts.
9607 *) Include RAND_status() into RAND_METHOD instead of implementing
9608 it only for md_rand.c Otherwise replacing the PRNG by calling
9609 RAND_set_rand_method would be impossible.
9612 *) Don't let DSA_generate_key() enter an infinite loop if the random
9613 number generation fails.
9616 *) New 'rand' application for creating pseudo-random output.
9619 *) Added configuration support for Linux/IA64
9620 [Rolf Haberrecker <rolf@suse.de>]
9622 *) Assembler module support for Mingw32.
9625 *) Shared library support for HPUX (in shlib/).
9626 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
9628 *) Shared library support for Solaris gcc.
9629 [Lutz Behnke <behnke@trustcenter.de>]
9631 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
9633 *) PKCS7_encrypt() was adding text MIME headers twice because they
9634 were added manually and by SMIME_crlf_copy().
9637 *) In bntest.c don't call BN_rand with zero bits argument.
9638 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
9640 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
9641 case was implemented. This caused BN_div_recp() to fail occasionally.
9644 *) Add an optional second argument to the set_label() in the perl
9645 assembly language builder. If this argument exists and is set
9646 to 1 it signals that the assembler should use a symbol whose
9647 scope is the entire file, not just the current function. This
9648 is needed with MASM which uses the format label:: for this scope.
9649 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
9651 *) Change the ASN1 types so they are typedefs by default. Before
9652 almost all types were #define'd to ASN1_STRING which was causing
9653 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
9657 *) Change names of new functions to the new get1/get0 naming
9658 convention: After 'get1', the caller owns a reference count
9659 and has to call ..._free; 'get0' returns a pointer to some
9660 data structure without incrementing reference counters.
9661 (Some of the existing 'get' functions increment a reference
9662 counter, some don't.)
9663 Similarly, 'set1' and 'add1' functions increase reference
9664 counters or duplicate objects.
9667 *) Allow for the possibility of temp RSA key generation failure:
9668 the code used to assume it always worked and crashed on failure.
9671 *) Fix potential buffer overrun problem in BIO_printf().
9672 [Ulf Möller, using public domain code by Patrick Powell; problem
9673 pointed out by David Sacerdote <das33@cornell.edu>]
9675 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
9676 RAND_egd() and RAND_status(). In the command line application,
9677 the EGD socket can be specified like a seed file using RANDFILE
9681 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
9682 Some CAs (e.g. Verisign) distribute certificates in this form.
9685 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
9686 list to exclude them. This means that no special compilation option
9687 is needed to use anonymous DH: it just needs to be included in the
9691 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
9692 EVP_MD_type. The old functionality is available in a new macro called
9693 EVP_MD_md(). Change code that uses it and update docs.
9696 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
9697 where the 'void *' argument is replaced by a function pointer argument.
9698 Previously 'void *' was abused to point to functions, which works on
9699 many platforms, but is not correct. As these functions are usually
9700 called by macros defined in OpenSSL header files, most source code
9701 should work without changes.
9704 *) <openssl/opensslconf.h> (which is created by Configure) now contains
9705 sections with information on -D... compiler switches used for
9706 compiling the library so that applications can see them. To enable
9707 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
9708 must be defined. E.g.,
9709 #define OPENSSL_ALGORITHM_DEFINES
9710 #include <openssl/opensslconf.h>
9711 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
9712 [Richard Levitte, Ulf and Bodo Möller]
9714 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
9718 *) Change the 'other' type in certificate aux info to a STACK_OF
9719 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
9720 the required ASN1 format: arbitrary types determined by an OID.
9723 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
9724 argument to 'req'. This is not because the function is newer or
9725 better than others it just uses the work 'NEW' in the certificate
9726 request header lines. Some software needs this.
9729 *) Reorganise password command line arguments: now passwords can be
9730 obtained from various sources. Delete the PEM_cb function and make
9731 it the default behaviour: i.e. if the callback is NULL and the
9732 usrdata argument is not NULL interpret it as a null terminated pass
9733 phrase. If usrdata and the callback are NULL then the pass phrase
9734 is prompted for as usual.
9737 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
9738 the support is automatically enabled. The resulting binaries will
9739 autodetect the card and use it if present.
9740 [Ben Laurie and Compaq Inc.]
9742 *) Work around for Netscape hang bug. This sends certificate request
9743 and server done in one record. Since this is perfectly legal in the
9744 SSL/TLS protocol it isn't a "bug" option and is on by default. See
9745 the bugs/SSLv3 entry for more info.
9748 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
9751 *) Add -rand argument to smime and pkcs12 applications and read/write
9755 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
9758 *) Add command line password options to the remaining applications.
9761 *) Bug fix for BN_div_recp() for numerators with an even number of
9765 *) More tests in bntest.c, and changed test_bn output.
9768 *) ./config recognizes MacOS X now.
9771 *) Bug fix for BN_div() when the first words of num and divsor are
9772 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
9775 *) Add support for various broken PKCS#8 formats, and command line
9776 options to produce them.
9779 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
9780 get temporary BIGNUMs from a BN_CTX.
9783 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
9787 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
9788 include a #define from the old name to the new. The original intent
9789 was that statically linked binaries could for example just call
9790 SSLeay_add_all_ciphers() to just add ciphers to the table and not
9791 link with digests. This never worked because SSLeay_add_all_digests()
9792 and SSLeay_add_all_ciphers() were in the same source file so calling
9793 one would link with the other. They are now in separate source files.
9796 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
9799 *) Use a less unusual form of the Miller-Rabin primality test (it used
9800 a binary algorithm for exponentiation integrated into the Miller-Rabin
9801 loop, our standard modexp algorithms are faster).
9804 *) Support for the EBCDIC character set completed.
9805 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
9807 *) Source code cleanups: use const where appropriate, eliminate casts,
9808 use void * instead of char * in lhash.
9811 *) Bugfix: ssl3_send_server_key_exchange was not restartable
9812 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
9813 this the server could overwrite ephemeral keys that the client
9817 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
9818 using 50 iterations of the Rabin-Miller test.
9820 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
9821 iterations of the Rabin-Miller test as required by the appendix
9822 to FIPS PUB 186[-1]) instead of DSA_is_prime.
9823 As BN_is_prime_fasttest includes trial division, DSA parameter
9824 generation becomes much faster.
9826 This implies a change for the callback functions in DSA_is_prime
9827 and DSA_generate_parameters: The callback function is called once
9828 for each positive witness in the Rabin-Miller test, not just
9829 occasionally in the inner loop; and the parameters to the
9830 callback function now provide an iteration count for the outer
9831 loop rather than for the current invocation of the inner loop.
9832 DSA_generate_parameters additionally can call the callback
9833 function with an 'iteration count' of -1, meaning that a
9834 candidate has passed the trial division test (when q is generated
9835 from an application-provided seed, trial division is skipped).
9838 *) New function BN_is_prime_fasttest that optionally does trial
9839 division before starting the Rabin-Miller test and has
9840 an additional BN_CTX * argument (whereas BN_is_prime always
9841 has to allocate at least one BN_CTX).
9842 'callback(1, -1, cb_arg)' is called when a number has passed the
9843 trial division stage.
9846 *) Fix for bug in CRL encoding. The validity dates weren't being handled
9850 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
9853 *) New function BN_pseudo_rand().
9856 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
9857 bignum version of BN_from_montgomery() with the working code from
9858 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
9862 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
9863 made it impossible to use the same SSL_SESSION data structure in
9864 SSL2 clients in multiple threads.
9867 *) The return value of RAND_load_file() no longer counts bytes obtained
9868 by stat(). RAND_load_file(..., -1) is new and uses the complete file
9869 to seed the PRNG (previously an explicit byte count was required).
9870 [Ulf Möller, Bodo Möller]
9872 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
9873 used (char *) instead of (void *) and had casts all over the place.
9876 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
9879 *) Retain source code compatibility for BN_prime_checks macro:
9880 BN_is_prime(..., BN_prime_checks, ...) now uses
9881 BN_prime_checks_for_size to determine the appropriate number of
9882 Rabin-Miller iterations.
9885 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
9886 DH_CHECK_P_NOT_SAFE_PRIME.
9887 (Check if this is true? OpenPGP calls them "strong".)
9890 *) Merge the functionality of "dh" and "gendh" programs into a new program
9891 "dhparam". The old programs are retained for now but will handle DH keys
9892 (instead of parameters) in future.
9895 *) Make the ciphers, s_server and s_client programs check the return values
9896 when a new cipher list is set.
9899 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
9900 ciphers. Before when the 56bit ciphers were enabled the sorting was
9903 The syntax for the cipher sorting has been extended to support sorting by
9904 cipher-strength (using the strength_bits hard coded in the tables).
9905 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
9907 Fix a bug in the cipher-command parser: when supplying a cipher command
9908 string with an "undefined" symbol (neither command nor alphanumeric
9909 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
9910 an error is flagged.
9912 Due to the strength-sorting extension, the code of the
9913 ssl_create_cipher_list() function was completely rearranged. I hope that
9914 the readability was also increased :-)
9915 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
9917 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
9918 for the first serial number and places 2 in the serial number file. This
9919 avoids problems when the root CA is created with serial number zero and
9920 the first user certificate has the same issuer name and serial number
9924 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
9925 the new code. Add documentation for this stuff.
9928 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
9929 X509_*() to X509at_*() on the grounds that they don't handle X509
9930 structures and behave in an analogous way to the X509v3 functions:
9931 they shouldn't be called directly but wrapper functions should be used
9934 So we also now have some wrapper functions that call the X509at functions
9935 when passed certificate requests. (TO DO: similar things can be done with
9936 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
9937 things. Some of these need some d2i or i2d and print functionality
9938 because they handle more complex structures.)
9941 *) Add missing #ifndefs that caused missing symbols when building libssl
9942 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
9943 NO_RSA in ssl/s2*.c.
9944 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
9946 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
9947 has a return value which indicates the quality of the random data
9948 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
9949 error queue. New function RAND_pseudo_bytes() generates output that is
9950 guaranteed to be unique but not unpredictable. RAND_add is like
9951 RAND_seed, but takes an extra argument for an entropy estimate
9952 (RAND_seed always assumes full entropy).
9955 *) Do more iterations of Rabin-Miller probable prime test (specifically,
9956 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
9957 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
9958 in crypto/bn/bn_prime.c for the complete table). This guarantees a
9959 false-positive rate of at most 2^-80 for random input.
9962 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
9965 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
9966 in the 0.9.5 release), this returns the chain
9967 from an X509_CTX structure with a dup of the stack and all
9968 the X509 reference counts upped: so the stack will exist
9969 after X509_CTX_cleanup() has been called. Modify pkcs12.c
9972 Also make SSL_SESSION_print() print out the verify return
9976 *) Add manpage for the pkcs12 command. Also change the default
9977 behaviour so MAC iteration counts are used unless the new
9978 -nomaciter option is used. This improves file security and
9979 only older versions of MSIE (4.0 for example) need it.
9982 *) Honor the no-xxx Configure options when creating .DEF files.
9985 *) Add PKCS#10 attributes to field table: challengePassword,
9986 unstructuredName and unstructuredAddress. These are taken from
9987 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
9988 international characters are used.
9990 More changes to X509_ATTRIBUTE code: allow the setting of types
9991 based on strings. Remove the 'loc' parameter when adding
9992 attributes because these will be a SET OF encoding which is sorted
9996 *) Initial changes to the 'req' utility to allow request generation
9997 automation. This will allow an application to just generate a template
9998 file containing all the field values and have req construct the
10001 Initial support for X509_ATTRIBUTE handling. Stacks of these are
10002 used all over the place including certificate requests and PKCS#7
10003 structures. They are currently handled manually where necessary with
10004 some primitive wrappers for PKCS#7. The new functions behave in a
10005 manner analogous to the X509 extension functions: they allow
10006 attributes to be looked up by NID and added.
10008 Later something similar to the X509V3 code would be desirable to
10009 automatically handle the encoding, decoding and printing of the
10010 more complex types. The string types like challengePassword can
10011 be handled by the string table functions.
10013 Also modified the multi byte string table handling. Now there is
10014 a 'global mask' which masks out certain types. The table itself
10015 can use the flag STABLE_NO_MASK to ignore the mask setting: this
10016 is useful when for example there is only one permissible type
10017 (as in countryName) and using the mask might result in no valid
10021 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
10022 SSL_get_peer_finished to allow applications to obtain the latest
10023 Finished messages sent to the peer or expected from the peer,
10024 respectively. (SSL_get_peer_finished is usually the Finished message
10025 actually received from the peer, otherwise the protocol will be aborted.)
10027 As the Finished message are message digests of the complete handshake
10028 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
10029 be used for external authentication procedures when the authentication
10030 provided by SSL/TLS is not desired or is not enough.
10033 *) Enhanced support for Alpha Linux is added. Now ./config checks if
10034 the host supports BWX extension and if Compaq C is present on the
10035 $PATH. Just exploiting of the BWX extension results in 20-30%
10036 performance kick for some algorithms, e.g. DES and RC4 to mention
10037 a couple. Compaq C in turn generates ~20% faster code for MD5 and
10041 *) Add support for MS "fast SGC". This is arguably a violation of the
10042 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
10043 weak crypto and after checking the certificate is SGC a second one
10044 with strong crypto. MS SGC stops the first handshake after receiving
10045 the server certificate message and sends a second client hello. Since
10046 a server will typically do all the time consuming operations before
10047 expecting any further messages from the client (server key exchange
10048 is the most expensive) there is little difference between the two.
10050 To get OpenSSL to support MS SGC we have to permit a second client
10051 hello message after we have sent server done. In addition we have to
10052 reset the MAC if we do get this second client hello.
10055 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
10056 if a DER encoded private key is RSA or DSA traditional format. Changed
10057 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
10058 format DER encoded private key. Newer code should use PKCS#8 format which
10059 has the key type encoded in the ASN1 structure. Added DER private key
10060 support to pkcs8 application.
10063 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
10064 ciphersuites has been selected (as required by the SSL 3/TLS 1
10065 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
10066 is set, we interpret this as a request to violate the specification
10067 (the worst that can happen is a handshake failure, and 'correct'
10068 behaviour would result in a handshake failure anyway).
10071 *) In SSL_CTX_add_session, take into account that there might be multiple
10072 SSL_SESSION structures with the same session ID (e.g. when two threads
10073 concurrently obtain them from an external cache).
10074 The internal cache can handle only one SSL_SESSION with a given ID,
10075 so if there's a conflict, we now throw out the old one to achieve
10079 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
10080 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
10081 some routines that use cipher OIDs: some ciphers do not have OIDs
10082 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
10086 *) Simplify the trust setting structure and code. Now we just have
10087 two sequences of OIDs for trusted and rejected settings. These will
10088 typically have values the same as the extended key usage extension
10089 and any application specific purposes.
10091 The trust checking code now has a default behaviour: it will just
10092 check for an object with the same NID as the passed id. Functions can
10093 be provided to override either the default behaviour or the behaviour
10094 for a given id. SSL client, server and email already have functions
10095 in place for compatibility: they check the NID and also return "trusted"
10096 if the certificate is self signed.
10099 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
10100 traditional format into an EVP_PKEY structure.
10103 *) Add a password callback function PEM_cb() which either prompts for
10104 a password if usr_data is NULL or otherwise assumes it is a null
10105 terminated password. Allow passwords to be passed on command line
10106 environment or config files in a few more utilities.
10109 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
10110 keys. Add some short names for PKCS#8 PBE algorithms and allow them
10111 to be specified on the command line for the pkcs8 and pkcs12 utilities.
10112 Update documentation.
10115 *) Support for ASN1 "NULL" type. This could be handled before by using
10116 ASN1_TYPE but there wasn't any function that would try to read a NULL
10117 and produce an error if it couldn't. For compatibility we also have
10118 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
10119 don't allocate anything because they don't need to.
10122 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
10124 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
10126 *) Rebuild of the memory allocation routines used by OpenSSL code and
10127 possibly others as well. The purpose is to make an interface that
10128 provide hooks so anyone can build a separate set of allocation and
10129 deallocation routines to be used by OpenSSL, for example memory
10130 pool implementations, or something else, which was previously hard
10131 since Malloc(), Realloc() and Free() were defined as macros having
10132 the values malloc, realloc and free, respectively (except for Win32
10133 compilations). The same is provided for memory debugging code.
10134 OpenSSL already comes with functionality to find memory leaks, but
10135 this gives people a chance to debug other memory problems.
10137 With these changes, a new set of functions and macros have appeared:
10139 CRYPTO_set_mem_debug_functions() [F]
10140 CRYPTO_get_mem_debug_functions() [F]
10141 CRYPTO_dbg_set_options() [F]
10142 CRYPTO_dbg_get_options() [F]
10143 CRYPTO_malloc_debug_init() [M]
10145 The memory debug functions are NULL by default, unless the library
10146 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
10147 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
10148 gives the standard debugging functions that come with OpenSSL) or
10149 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
10150 provided by the library user) must be used. When the standard
10151 debugging functions are used, CRYPTO_dbg_set_options can be used to
10152 request additional information:
10153 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
10154 the CRYPTO_MDEBUG_xxx macro when compiling the library.
10156 Also, things like CRYPTO_set_mem_functions will always give the
10157 expected result (the new set of functions is used for allocation
10158 and deallocation) at all times, regardless of platform and compiler
10161 To finish it up, some functions that were never use in any other
10162 way than through macros have a new API and new semantic:
10164 CRYPTO_dbg_malloc()
10165 CRYPTO_dbg_realloc()
10168 All macros of value have retained their old syntax.
10169 [Richard Levitte and Bodo Moeller]
10171 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
10172 ordering of SMIMECapabilities wasn't in "strength order" and there
10173 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
10177 *) Some ASN1 types with illegal zero length encoding (INTEGER,
10178 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
10179 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
10181 *) Merge in my S/MIME library for OpenSSL. This provides a simple
10182 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
10183 functionality to handle multipart/signed properly) and a utility
10184 called 'smime' to call all this stuff. This is based on code I
10185 originally wrote for Celo who have kindly allowed it to be
10186 included in OpenSSL.
10189 *) Add variants des_set_key_checked and des_set_key_unchecked of
10190 des_set_key (aka des_key_sched). Global variable des_check_key
10191 decides which of these is called by des_set_key; this way
10192 des_check_key behaves as it always did, but applications and
10193 the library itself, which was buggy for des_check_key == 1,
10194 have a cleaner way to pick the version they need.
10197 *) New function PKCS12_newpass() which changes the password of a
10201 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
10202 dynamic mix. In both cases the ids can be used as an index into the
10203 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
10204 functions so they accept a list of the field values and the
10205 application doesn't need to directly manipulate the X509_TRUST
10209 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
10213 *) Modify the way the V3 extension code looks up extensions. This now
10214 works in a similar way to the object code: we have some "standard"
10215 extensions in a static table which is searched with OBJ_bsearch()
10216 and the application can add dynamic ones if needed. The file
10217 crypto/x509v3/ext_dat.h now has the info: this file needs to be
10218 updated whenever a new extension is added to the core code and kept
10219 in ext_nid order. There is a simple program 'tabtest.c' which checks
10220 this. New extensions are not added too often so this file can readily
10221 be maintained manually.
10223 There are two big advantages in doing things this way. The extensions
10224 can be looked up immediately and no longer need to be "added" using
10225 X509V3_add_standard_extensions(): this function now does nothing.
10226 [Side note: I get *lots* of email saying the extension code doesn't
10227 work because people forget to call this function]
10228 Also no dynamic allocation is done unless new extensions are added:
10229 so if we don't add custom extensions there is no need to call
10230 X509V3_EXT_cleanup().
10233 *) Modify enc utility's salting as follows: make salting the default. Add a
10234 magic header, so unsalted files fail gracefully instead of just decrypting
10235 to garbage. This is because not salting is a big security hole, so people
10236 should be discouraged from doing it.
10239 *) Fixes and enhancements to the 'x509' utility. It allowed a message
10240 digest to be passed on the command line but it only used this
10241 parameter when signing a certificate. Modified so all relevant
10242 operations are affected by the digest parameter including the
10243 -fingerprint and -x509toreq options. Also -x509toreq choked if a
10244 DSA key was used because it didn't fix the digest.
10247 *) Initial certificate chain verify code. Currently tests the untrusted
10248 certificates for consistency with the verify purpose (which is set
10249 when the X509_STORE_CTX structure is set up) and checks the pathlength.
10251 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
10252 this is because it will reject chains with invalid extensions whereas
10253 every previous version of OpenSSL and SSLeay made no checks at all.
10255 Trust code: checks the root CA for the relevant trust settings. Trust
10256 settings have an initial value consistent with the verify purpose: e.g.
10257 if the verify purpose is for SSL client use it expects the CA to be
10258 trusted for SSL client use. However the default value can be changed to
10259 permit custom trust settings: one example of this would be to only trust
10260 certificates from a specific "secure" set of CAs.
10262 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
10263 which should be used for version portability: especially since the
10264 verify structure is likely to change more often now.
10266 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
10267 to set them. If not set then assume SSL clients will verify SSL servers
10270 Two new options to the verify program: -untrusted allows a set of
10271 untrusted certificates to be passed in and -purpose which sets the
10272 intended purpose of the certificate. If a purpose is set then the
10273 new chain verify code is used to check extension consistency.
10276 *) Support for the authority information access extension.
10279 *) Modify RSA and DSA PEM read routines to transparently handle
10280 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
10281 public keys in a format compatible with certificate
10282 SubjectPublicKeyInfo structures. Unfortunately there were already
10283 functions called *_PublicKey_* which used various odd formats so
10284 these are retained for compatibility: however the DSA variants were
10285 never in a public release so they have been deleted. Changed dsa/rsa
10286 utilities to handle the new format: note no releases ever handled public
10287 keys so we should be OK.
10289 The primary motivation for this change is to avoid the same fiasco
10290 that dogs private keys: there are several incompatible private key
10291 formats some of which are standard and some OpenSSL specific and
10292 require various evil hacks to allow partial transparent handling and
10293 even then it doesn't work with DER formats. Given the option anything
10294 other than PKCS#8 should be dumped: but the other formats have to
10295 stay in the name of compatibility.
10297 With public keys and the benefit of hindsight one standard format
10298 is used which works with EVP_PKEY, RSA or DSA structures: though
10299 it clearly returns an error if you try to read the wrong kind of key.
10301 Added a -pubkey option to the 'x509' utility to output the public key.
10302 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
10303 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
10304 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
10305 that do the same as the EVP_PKEY_assign_*() except they up the
10306 reference count of the added key (they don't "swallow" the
10310 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
10311 CRLs would fail if the file contained no certificates or no CRLs:
10312 added a new function to read in both types and return the number
10313 read: this means that if none are read it will be an error. The
10314 DER versions of the certificate and CRL reader would always fail
10315 because it isn't possible to mix certificates and CRLs in DER format
10316 without choking one or the other routine. Changed this to just read
10317 a certificate: this is the best we can do. Also modified the code
10318 in apps/verify.c to take notice of return codes: it was previously
10319 attempting to read in certificates from NULL pointers and ignoring
10320 any errors: this is one reason why the cert and CRL reader seemed
10321 to work. It doesn't check return codes from the default certificate
10322 routines: these may well fail if the certificates aren't installed.
10325 *) Code to support otherName option in GeneralName.
10328 *) First update to verify code. Change the verify utility
10329 so it warns if it is passed a self signed certificate:
10330 for consistency with the normal behaviour. X509_verify
10331 has been modified to it will now verify a self signed
10332 certificate if *exactly* the same certificate appears
10333 in the store: it was previously impossible to trust a
10334 single self signed certificate. This means that:
10335 openssl verify ss.pem
10336 now gives a warning about a self signed certificate but
10337 openssl verify -CAfile ss.pem ss.pem
10341 *) For servers, store verify_result in SSL_SESSION data structure
10342 (and add it to external session representation).
10343 This is needed when client certificate verifications fails,
10344 but an application-provided verification callback (set by
10345 SSL_CTX_set_cert_verify_callback) allows accepting the session
10346 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
10347 but returns 1): When the session is reused, we have to set
10348 ssl->verify_result to the appropriate error code to avoid
10350 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
10352 *) Fix a bug in the new PKCS#7 code: it didn't consider the
10353 case in PKCS7_dataInit() where the signed PKCS7 structure
10354 didn't contain any existing data because it was being created.
10355 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
10357 *) Add a salt to the key derivation routines in enc.c. This
10358 forms the first 8 bytes of the encrypted file. Also add a
10359 -S option to allow a salt to be input on the command line.
10362 *) New function X509_cmp(). Oddly enough there wasn't a function
10363 to compare two certificates. We do this by working out the SHA1
10364 hash and comparing that. X509_cmp() will be needed by the trust
10368 *) SSL_get1_session() is like SSL_get_session(), but increments
10369 the reference count in the SSL_SESSION returned.
10370 [Geoff Thorpe <geoff@eu.c2.net>]
10372 *) Fix for 'req': it was adding a null to request attributes.
10373 Also change the X509_LOOKUP and X509_INFO code to handle
10374 certificate auxiliary information.
10377 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
10381 *) Add the possibility to add extra information to the memory leak
10382 detecting output, to form tracebacks, showing from where each
10383 allocation was originated: CRYPTO_push_info("constant string") adds
10384 the string plus current file name and line number to a per-thread
10385 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
10386 is like calling CYRPTO_pop_info() until the stack is empty.
10387 Also updated memory leak detection code to be multi-thread-safe.
10390 *) Add options -text and -noout to pkcs7 utility and delete the
10391 encryption options which never did anything. Update docs.
10394 *) Add options to some of the utilities to allow the pass phrase
10395 to be included on either the command line (not recommended on
10396 OSes like Unix) or read from the environment. Update the
10397 manpages and fix a few bugs.
10400 *) Add a few manpages for some of the openssl commands.
10403 *) Fix the -revoke option in ca. It was freeing up memory twice,
10404 leaking and not finding already revoked certificates.
10407 *) Extensive changes to support certificate auxiliary information.
10408 This involves the use of X509_CERT_AUX structure and X509_AUX
10409 functions. An X509_AUX function such as PEM_read_X509_AUX()
10410 can still read in a certificate file in the usual way but it
10411 will also read in any additional "auxiliary information". By
10412 doing things this way a fair degree of compatibility can be
10413 retained: existing certificates can have this information added
10414 using the new 'x509' options.
10416 Current auxiliary information includes an "alias" and some trust
10417 settings. The trust settings will ultimately be used in enhanced
10418 certificate chain verification routines: currently a certificate
10419 can only be trusted if it is self signed and then it is trusted
10423 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
10424 The problem was that one of the replacement routines had not been working
10425 since SSLeay releases. For now the offending routine has been replaced
10426 with non-optimised assembler. Even so, this now gives around 95%
10427 performance improvement for 1024 bit RSA signs.
10430 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
10431 handling. Most clients have the effective key size in bits equal to
10432 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
10433 A few however don't do this and instead use the size of the decrypted key
10434 to determine the RC2 key length and the AlgorithmIdentifier to determine
10435 the effective key length. In this case the effective key length can still
10436 be 40 bits but the key length can be 168 bits for example. This is fixed
10437 by manually forcing an RC2 key into the EVP_PKEY structure because the
10438 EVP code can't currently handle unusual RC2 key sizes: it always assumes
10439 the key length and effective key length are equal.
10442 *) Add a bunch of functions that should simplify the creation of
10443 X509_NAME structures. Now you should be able to do:
10444 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
10445 and have it automatically work out the correct field type and fill in
10446 the structures. The more adventurous can try:
10447 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
10448 and it will (hopefully) work out the correct multibyte encoding.
10451 *) Change the 'req' utility to use the new field handling and multibyte
10452 copy routines. Before the DN field creation was handled in an ad hoc
10453 way in req, ca, and x509 which was rather broken and didn't support
10454 BMPStrings or UTF8Strings. Since some software doesn't implement
10455 BMPStrings or UTF8Strings yet, they can be enabled using the config file
10456 using the dirstring_type option. See the new comment in the default
10457 openssl.cnf for more info.
10460 *) Make crypto/rand/md_rand.c more robust:
10461 - Assure unique random numbers after fork().
10462 - Make sure that concurrent threads access the global counter and
10463 md serializably so that we never lose entropy in them
10464 or use exactly the same state in multiple threads.
10465 Access to the large state is not always serializable because
10466 the additional locking could be a performance killer, and
10467 md should be large enough anyway.
10470 *) New file apps/app_rand.c with commonly needed functionality
10471 for handling the random seed file.
10473 Use the random seed file in some applications that previously did not:
10475 dsaparam -genkey (which also ignored its '-rand' option),
10478 x509 (when signing).
10479 Except on systems with /dev/urandom, it is crucial to have a random
10480 seed file at least for key creation, DSA signing, and for DH exchanges;
10481 for RSA signatures we could do without one.
10483 gendh and gendsa (unlike genrsa) used to read only the first byte
10484 of each file listed in the '-rand' option. The function as previously
10485 found in genrsa is now in app_rand.c and is used by all programs
10486 that support '-rand'.
10489 *) In RAND_write_file, use mode 0600 for creating files;
10490 don't just chmod when it may be too late.
10493 *) Report an error from X509_STORE_load_locations
10494 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
10497 *) New function ASN1_mbstring_copy() this copies a string in either
10498 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
10499 into an ASN1_STRING type. A mask of permissible types is passed
10500 and it chooses the "minimal" type to use or an error if not type
10504 *) Add function equivalents to the various macros in asn1.h. The old
10505 macros are retained with an M_ prefix. Code inside the library can
10506 use the M_ macros. External code (including the openssl utility)
10507 should *NOT* in order to be "shared library friendly".
10510 *) Add various functions that can check a certificate's extensions
10511 to see if it usable for various purposes such as SSL client,
10512 server or S/MIME and CAs of these types. This is currently
10513 VERY EXPERIMENTAL but will ultimately be used for certificate chain
10514 verification. Also added a -purpose flag to x509 utility to
10515 print out all the purposes.
10518 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
10522 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
10523 for, obtain and decode and extension and obtain its critical flag.
10524 This allows all the necessary extension code to be handled in a
10525 single function call.
10528 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
10529 platforms. See crypto/rc4/rc4_enc.c for further details.
10532 *) New -noout option to asn1parse. This causes no output to be produced
10533 its main use is when combined with -strparse and -out to extract data
10534 from a file (which may not be in ASN.1 format).
10537 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
10538 when producing the local key id.
10539 [Richard Levitte <levitte@stacken.kth.se>]
10541 *) New option -dhparam in s_server. This allows a DH parameter file to be
10542 stated explicitly. If it is not stated then it tries the first server
10543 certificate file. The previous behaviour hard coded the filename
10547 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
10548 a public key to be input or output. For example:
10549 openssl rsa -in key.pem -pubout -out pubkey.pem
10550 Also added necessary DSA public key functions to handle this.
10553 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
10554 in the message. This was handled by allowing
10555 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
10556 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
10558 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
10559 to the end of the strings whereas this didn't. This would cause problems
10560 if strings read with d2i_ASN1_bytes() were later modified.
10561 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
10563 *) Fix for base64 decode bug. When a base64 bio reads only one line of
10564 data and it contains EOF it will end up returning an error. This is
10565 caused by input 46 bytes long. The cause is due to the way base64
10566 BIOs find the start of base64 encoded data. They do this by trying a
10567 trial decode on each line until they find one that works. When they
10568 do a flag is set and it starts again knowing it can pass all the
10569 data directly through the decoder. Unfortunately it doesn't reset
10570 the context it uses. This means that if EOF is reached an attempt
10571 is made to pass two EOFs through the context and this causes the
10572 resulting error. This can also cause other problems as well. As is
10573 usual with these problems it takes *ages* to find and the fix is
10574 trivial: move one line.
10575 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
10577 *) Ugly workaround to get s_client and s_server working under Windows. The
10578 old code wouldn't work because it needed to select() on sockets and the
10579 tty (for keypresses and to see if data could be written). Win32 only
10580 supports select() on sockets so we select() with a 1s timeout on the
10581 sockets and then see if any characters are waiting to be read, if none
10582 are present then we retry, we also assume we can always write data to
10583 the tty. This isn't nice because the code then blocks until we've
10584 received a complete line of data and it is effectively polling the
10585 keyboard at 1s intervals: however it's quite a bit better than not
10586 working at all :-) A dedicated Windows application might handle this
10587 with an event loop for example.
10590 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
10591 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
10592 will be called when RSA_sign() and RSA_verify() are used. This is useful
10593 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
10594 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
10595 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
10596 This necessitated the support of an extra signature type NID_md5_sha1
10597 for SSL signatures and modifications to the SSL library to use it instead
10598 of calling RSA_public_decrypt() and RSA_private_encrypt().
10601 *) Add new -verify -CAfile and -CApath options to the crl program, these
10602 will lookup a CRL issuers certificate and verify the signature in a
10603 similar way to the verify program. Tidy up the crl program so it
10604 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
10605 less strict. It will now permit CRL extensions even if it is not
10606 a V2 CRL: this will allow it to tolerate some broken CRLs.
10609 *) Initialize all non-automatic variables each time one of the openssl
10610 sub-programs is started (this is necessary as they may be started
10611 multiple times from the "OpenSSL>" prompt).
10612 [Lennart Bang, Bodo Moeller]
10614 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
10615 removing all other RSA functionality (this is what NO_RSA does). This
10616 is so (for example) those in the US can disable those operations covered
10617 by the RSA patent while allowing storage and parsing of RSA keys and RSA
10621 *) Non-copying interface to BIO pairs.
10622 (still largely untested)
10625 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
10626 ASCII string. This was handled independently in various places before.
10629 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
10630 UTF8 strings a character at a time.
10633 *) Use client_version from client hello to select the protocol
10634 (s23_srvr.c) and for RSA client key exchange verification
10635 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
10638 *) Add various utility functions to handle SPKACs, these were previously
10639 handled by poking round in the structure internals. Added new function
10640 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
10641 print, verify and generate SPKACs. Based on an original idea from
10642 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
10645 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
10648 *) Allow the config file extension section to be overwritten on the
10649 command line. Based on an original idea from Massimiliano Pala
10650 <madwolf@comune.modena.it>. The new option is called -extensions
10651 and can be applied to ca, req and x509. Also -reqexts to override
10652 the request extensions in req and -crlexts to override the crl extensions
10656 *) Add new feature to the SPKAC handling in ca. Now you can include
10657 the same field multiple times by preceding it by "XXXX." for example:
10660 this is the same syntax as used in the req config file.
10663 *) Allow certificate extensions to be added to certificate requests. These
10664 are specified in a 'req_extensions' option of the req section of the
10665 config file. They can be printed out with the -text option to req but
10666 are otherwise ignored at present.
10669 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
10670 data read consists of only the final block it would not decrypted because
10671 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
10672 A misplaced 'break' also meant the decrypted final block might not be
10673 copied until the next read.
10676 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
10677 a few extra parameters to the DH structure: these will be useful if
10678 for example we want the value of 'q' or implement X9.42 DH.
10681 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
10682 provides hooks that allow the default DSA functions or functions on a
10683 "per key" basis to be replaced. This allows hardware acceleration and
10684 hardware key storage to be handled without major modification to the
10685 library. Also added low level modexp hooks and CRYPTO_EX structure and
10686 associated functions.
10689 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
10690 as "read only": it can't be written to and the buffer it points to will
10691 not be freed. Reading from a read only BIO is much more efficient than
10692 a normal memory BIO. This was added because there are several times when
10693 an area of memory needs to be read from a BIO. The previous method was
10694 to create a memory BIO and write the data to it, this results in two
10695 copies of the data and an O(n^2) reading algorithm. There is a new
10696 function BIO_new_mem_buf() which creates a read only memory BIO from
10697 an area of memory. Also modified the PKCS#7 routines to use read only
10701 *) Bugfix: ssl23_get_client_hello did not work properly when called in
10702 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
10703 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
10704 but a retry condition occurred while trying to read the rest.
10707 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
10708 NID_pkcs7_encrypted by default: this was wrong since this should almost
10709 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
10710 the encrypted data type: this is a more sensible place to put it and it
10711 allows the PKCS#12 code to be tidied up that duplicated this
10715 *) Changed obj_dat.pl script so it takes its input and output files on
10716 the command line. This should avoid shell escape redirection problems
10720 *) Initial support for certificate extension requests, these are included
10721 in things like Xenroll certificate requests. Included functions to allow
10722 extensions to be obtained and added.
10725 *) -crlf option to s_client and s_server for sending newlines as
10726 CRLF (as required by many protocols).
10729 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
10731 *) Install libRSAglue.a when OpenSSL is built with RSAref.
10732 [Ralf S. Engelschall]
10734 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
10735 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
10737 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
10741 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
10742 DH parameters/keys (q is lost during that conversion, but the resulting
10743 DH parameters contain its length).
10745 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
10746 much faster than DH_generate_parameters (which creates parameters
10747 where p = 2*q + 1), and also the smaller q makes DH computations
10748 much more efficient (160-bit exponentiation instead of 1024-bit
10749 exponentiation); so this provides a convenient way to support DHE
10750 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
10751 utter importance to use
10752 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
10754 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
10755 when such DH parameters are used, because otherwise small subgroup
10756 attacks may become possible!
10759 *) Avoid memory leak in i2d_DHparams.
10762 *) Allow the -k option to be used more than once in the enc program:
10763 this allows the same encrypted message to be read by multiple recipients.
10766 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
10767 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
10768 it will always use the numerical form of the OID, even if it has a short
10772 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
10773 method only got called if p,q,dmp1,dmq1,iqmp components were present,
10774 otherwise bn_mod_exp was called. In the case of hardware keys for example
10775 no private key components need be present and it might store extra data
10776 in the RSA structure, which cannot be accessed from bn_mod_exp.
10777 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
10778 private key operations.
10781 *) Added support for SPARC Linux.
10784 *) pem_password_cb function type incompatibly changed from
10785 typedef int pem_password_cb(char *buf, int size, int rwflag);
10787 ....(char *buf, int size, int rwflag, void *userdata);
10788 so that applications can pass data to their callbacks:
10789 The PEM[_ASN1]_{read,write}... functions and macros now take an
10790 additional void * argument, which is just handed through whenever
10791 the password callback is called.
10792 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
10794 New function SSL_CTX_set_default_passwd_cb_userdata.
10796 Compatibility note: As many C implementations push function arguments
10797 onto the stack in reverse order, the new library version is likely to
10798 interoperate with programs that have been compiled with the old
10799 pem_password_cb definition (PEM_whatever takes some data that
10800 happens to be on the stack as its last argument, and the callback
10801 just ignores this garbage); but there is no guarantee whatsoever that
10804 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
10805 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
10806 problems not only on Windows, but also on some Unix platforms.
10807 To avoid problematic command lines, these definitions are now in an
10808 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
10809 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
10812 *) MIPS III/IV assembler module is reimplemented.
10815 *) More DES library cleanups: remove references to srand/rand and
10816 delete an unused file.
10819 *) Add support for the the free Netwide assembler (NASM) under Win32,
10820 since not many people have MASM (ml) and it can be hard to obtain.
10821 This is currently experimental but it seems to work OK and pass all
10822 the tests. Check out INSTALL.W32 for info.
10825 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
10826 without temporary keys kept an extra copy of the server key,
10827 and connections with temporary keys did not free everything in case
10831 *) New function RSA_check_key and new openssl rsa option -check
10832 for verifying the consistency of RSA keys.
10833 [Ulf Moeller, Bodo Moeller]
10835 *) Various changes to make Win32 compile work:
10836 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
10837 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
10838 comparison" warnings.
10839 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
10842 *) Add a debugging option to PKCS#5 v2 key generation function: when
10843 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
10844 derived keys are printed to stderr.
10847 *) Copy the flags in ASN1_STRING_dup().
10848 [Roman E. Pavlov <pre@mo.msk.ru>]
10850 *) The x509 application mishandled signing requests containing DSA
10851 keys when the signing key was also DSA and the parameters didn't match.
10853 It was supposed to omit the parameters when they matched the signing key:
10854 the verifying software was then supposed to automatically use the CA's
10855 parameters if they were absent from the end user certificate.
10857 Omitting parameters is no longer recommended. The test was also
10858 the wrong way round! This was probably due to unusual behaviour in
10859 EVP_cmp_parameters() which returns 1 if the parameters match.
10860 This meant that parameters were omitted when they *didn't* match and
10861 the certificate was useless. Certificates signed with 'ca' didn't have
10863 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
10865 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
10866 The interface is as follows:
10867 Applications can use
10868 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
10869 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
10870 "off" is now the default.
10871 The library internally uses
10872 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
10873 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
10874 to disable memory-checking temporarily.
10876 Some inconsistent states that previously were possible (and were
10877 even the default) are now avoided.
10879 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
10880 with each memory chunk allocated; this is occasionally more helpful
10881 than just having a counter.
10883 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
10885 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
10889 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
10890 which largely parallels "options", but is for changing API behaviour,
10891 whereas "options" are about protocol behaviour.
10892 Initial "mode" flags are:
10894 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
10895 a single record has been written.
10896 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
10897 retries use the same buffer location.
10898 (But all of the contents must be
10902 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
10905 *) Fix problems with no-hmac etc.
10906 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
10908 *) New functions RSA_get_default_method(), RSA_set_method() and
10909 RSA_get_method(). These allows replacement of RSA_METHODs without having
10910 to mess around with the internals of an RSA structure.
10913 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
10914 Also really enable memory leak checks in openssl.c and in some
10916 [Chad C. Mulligan, Bodo Moeller]
10918 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
10919 up the length of negative integers. This has now been simplified to just
10920 store the length when it is first determined and use it later, rather
10921 than trying to keep track of where data is copied and updating it to
10923 [Steve Henson, reported by Brien Wheeler
10924 <bwheeler@authentica-security.com>]
10926 *) Add a new function PKCS7_signatureVerify. This allows the verification
10927 of a PKCS#7 signature but with the signing certificate passed to the
10928 function itself. This contrasts with PKCS7_dataVerify which assumes the
10929 certificate is present in the PKCS#7 structure. This isn't always the
10930 case: certificates can be omitted from a PKCS#7 structure and be
10931 distributed by "out of band" means (such as a certificate database).
10934 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
10935 function prototypes in pem.h, also change util/mkdef.pl to add the
10936 necessary function names.
10939 *) mk1mf.pl (used by Windows builds) did not properly read the
10940 options set by Configure in the top level Makefile, and Configure
10941 was not even able to write more than one option correctly.
10942 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
10945 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
10946 file to be loaded from a BIO or FILE pointer. The BIO version will
10947 for example allow memory BIOs to contain config info.
10950 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
10951 Whoever hopes to achieve shared-library compatibility across versions
10952 must use this, not the compile-time macro.
10953 (Exercise 0.9.4: Which is the minimum library version required by
10955 Note: All this applies only to multi-threaded programs, others don't
10959 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
10960 through a BIO pair triggered the default case, i.e.
10961 SSLerr(...,SSL_R_UNKNOWN_STATE).
10964 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
10965 can use the SSL library even if none of the specific BIOs is
10969 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
10970 for the encoded length.
10971 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
10973 *) Add initial documentation of the X509V3 functions.
10976 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
10977 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
10978 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
10979 secure PKCS#8 private key format with a high iteration count.
10982 *) Fix determination of Perl interpreter: A perl or perl5
10983 _directory_ in $PATH was also accepted as the interpreter.
10984 [Ralf S. Engelschall]
10986 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
10987 wrong with it but it was very old and did things like calling
10988 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
10989 unusual formatting.
10992 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
10993 to use the new extension code.
10996 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
10997 with macros. This should make it easier to change their form, add extra
10998 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
11002 *) Add to configuration table a new entry that can specify an alternative
11003 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
11004 according to Mark Crispin <MRC@Panda.COM>.
11008 *) DES CBC did not update the IV. Weird.
11011 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
11012 Changing the behaviour of the former might break existing programs --
11013 where IV updating is needed, des_ncbc_encrypt can be used.
11016 *) When bntest is run from "make test" it drives bc to check its
11017 calculations, as well as internally checking them. If an internal check
11018 fails, it needs to cause bc to give a non-zero result or make test carries
11019 on without noticing the failure. Fixed.
11022 *) DES library cleanups.
11025 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
11026 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
11027 ciphers. NOTE: although the key derivation function has been verified
11028 against some published test vectors it has not been extensively tested
11029 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
11033 *) Instead of "mkdir -p", which is not fully portable, use new
11034 Perl script "util/mkdir-p.pl".
11037 *) Rewrite the way password based encryption (PBE) is handled. It used to
11038 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
11039 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
11040 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
11041 the 'parameter' field of the AlgorithmIdentifier is passed to the
11042 underlying key generation function so it must do its own ASN1 parsing.
11043 This has also changed the EVP_PBE_CipherInit() function which now has a
11044 'parameter' argument instead of literal salt and iteration count values
11045 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
11048 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
11049 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
11050 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
11051 KEY" because this clashed with PKCS#8 unencrypted string. Since this
11052 value was just used as a "magic string" and not used directly its
11053 value doesn't matter.
11056 *) Introduce some semblance of const correctness to BN. Shame C doesn't
11060 *) "linux-sparc64" configuration (ultrapenguin).
11061 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
11062 "linux-sparc" configuration.
11063 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
11065 *) config now generates no-xxx options for missing ciphers.
11068 *) Support the EBCDIC character set (work in progress).
11069 File ebcdic.c not yet included because it has a different license.
11070 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
11072 *) Support BS2000/OSD-POSIX.
11073 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
11075 *) Make callbacks for key generation use void * instead of char *.
11078 *) Make S/MIME samples compile (not yet tested).
11081 *) Additional typesafe stacks.
11084 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
11088 Changes between 0.9.3 and 0.9.3a [29 May 1999]
11090 *) New configuration variant "sco5-gcc".
11092 *) Updated some demos.
11093 [Sean O Riordain, Wade Scholine]
11095 *) Add missing BIO_free at exit of pkcs12 application.
11098 *) Fix memory leak in conf.c.
11101 *) Updates for Win32 to assembler version of MD5.
11104 *) Set #! path to perl in apps/der_chop to where we found it
11105 instead of using a fixed path.
11108 *) SHA library changes for irix64-mips4-cc.
11111 *) Improvements for VMS support.
11115 Changes between 0.9.2b and 0.9.3 [24 May 1999]
11117 *) Bignum library bug fix. IRIX 6 passes "make test" now!
11118 This also avoids the problems with SC4.2 and unpatched SC5.
11119 [Andy Polyakov <appro@fy.chalmers.se>]
11121 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
11122 These are required because of the typesafe stack would otherwise break
11123 existing code. If old code used a structure member which used to be STACK
11124 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
11125 sk_num or sk_value it would produce an error because the num, data members
11126 are not present in STACK_OF. Now it just produces a warning. sk_set
11127 replaces the old method of assigning a value to sk_value
11128 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
11129 that does this will no longer work (and should use sk_set instead) but
11130 this could be regarded as a "questionable" behaviour anyway.
11133 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
11134 correctly handle encrypted S/MIME data.
11137 *) Change type of various DES function arguments from des_cblock
11138 (which means, in function argument declarations, pointer to char)
11139 to des_cblock * (meaning pointer to array with 8 char elements),
11140 which allows the compiler to do more typechecking; it was like
11141 that back in SSLeay, but with lots of ugly casts.
11143 Introduce new type const_des_cblock.
11146 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
11147 problems: find RecipientInfo structure that matches recipient certificate
11148 and initialise the ASN1 structures properly based on passed cipher.
11151 *) Belatedly make the BN tests actually check the results.
11154 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
11155 to and from BNs: it was completely broken. New compilation option
11156 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
11157 key elements as negative integers.
11160 *) Reorganize and speed up MD5.
11161 [Andy Polyakov <appro@fy.chalmers.se>]
11164 [Richard Levitte <richard@levitte.org>]
11166 *) New option -out to asn1parse to allow the parsed structure to be
11167 output to a file. This is most useful when combined with the -strparse
11168 option to examine the output of things like OCTET STRINGS.
11171 *) Make SSL library a little more fool-proof by not requiring any longer
11172 that SSL_set_{accept,connect}_state be called before
11173 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
11174 in many applications because usually everything *appeared* to work as
11175 intended anyway -- now it really works as intended).
11178 *) Move openssl.cnf out of lib/.
11181 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
11182 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
11183 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
11184 [Ralf S. Engelschall]
11186 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
11187 handle PKCS#7 enveloped data properly.
11188 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
11190 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
11191 copying pointers. The cert_st handling is changed by this in
11192 various ways (and thus what used to be known as ctx->default_cert
11193 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
11194 any longer when s->cert does not give us what we need).
11195 ssl_cert_instantiate becomes obsolete by this change.
11196 As soon as we've got the new code right (possibly it already is?),
11197 we have solved a couple of bugs of the earlier code where s->cert
11198 was used as if it could not have been shared with other SSL structures.
11200 Note that using the SSL API in certain dirty ways now will result
11201 in different behaviour than observed with earlier library versions:
11202 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
11203 does not influence s as it used to.
11205 In order to clean up things more thoroughly, inside SSL_SESSION
11206 we don't use CERT any longer, but a new structure SESS_CERT
11207 that holds per-session data (if available); currently, this is
11208 the peer's certificate chain and, for clients, the server's certificate
11209 and temporary key. CERT holds only those values that can have
11210 meaningful defaults in an SSL_CTX.
11213 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
11214 from the internal representation. Various PKCS#7 fixes: remove some
11215 evil casts and set the enc_dig_alg field properly based on the signing
11219 *) Allow PKCS#12 password to be set from the command line or the
11220 environment. Let 'ca' get its config file name from the environment
11221 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
11225 *) Allow certificate policies extension to use an IA5STRING for the
11226 organization field. This is contrary to the PKIX definition but
11227 VeriSign uses it and IE5 only recognises this form. Document 'x509'
11231 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
11232 without disallowing inline assembler and the like for non-pedantic builds.
11235 *) Support Borland C++ builder.
11236 [Janez Jere <jj@void.si>, modified by Ulf Möller]
11238 *) Support Mingw32.
11241 *) SHA-1 cleanups and performance enhancements.
11242 [Andy Polyakov <appro@fy.chalmers.se>]
11244 *) Sparc v8plus assembler for the bignum library.
11245 [Andy Polyakov <appro@fy.chalmers.se>]
11247 *) Accept any -xxx and +xxx compiler options in Configure.
11250 *) Update HPUX configuration.
11253 *) Add missing sk_<type>_unshift() function to safestack.h
11254 [Ralf S. Engelschall]
11256 *) New function SSL_CTX_use_certificate_chain_file that sets the
11257 "extra_cert"s in addition to the certificate. (This makes sense
11258 only for "PEM" format files, as chains as a whole are not
11262 *) Support verify_depth from the SSL API.
11263 x509_vfy.c had what can be considered an off-by-one-error:
11264 Its depth (which was not part of the external interface)
11265 was actually counting the number of certificates in a chain;
11266 now it really counts the depth.
11269 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
11270 instead of X509err, which often resulted in confusing error
11271 messages since the error codes are not globally unique
11272 (e.g. an alleged error in ssl3_accept when a certificate
11273 didn't match the private key).
11275 *) New function SSL_CTX_set_session_id_context that allows to set a default
11276 value (so that you don't need SSL_set_session_id_context for each
11277 connection using the SSL_CTX).
11280 *) OAEP decoding bug fix.
11283 *) Support INSTALL_PREFIX for package builders, as proposed by
11287 *) New Configure options "threads" and "no-threads". For systems
11288 where the proper compiler options are known (currently Solaris
11289 and Linux), "threads" is the default.
11292 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
11295 *) Install various scripts to $(OPENSSLDIR)/misc, not to
11296 $(INSTALLTOP)/bin -- they shouldn't clutter directories
11297 such as /usr/local/bin.
11300 *) "make linux-shared" to build shared libraries.
11301 [Niels Poppe <niels@netbox.org>]
11303 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
11306 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
11307 extension adding in x509 utility.
11310 *) Remove NOPROTO sections and error code comments.
11313 *) Partial rewrite of the DEF file generator to now parse the ANSI
11317 *) New Configure options --prefix=DIR and --openssldir=DIR.
11320 *) Complete rewrite of the error code script(s). It is all now handled
11321 by one script at the top level which handles error code gathering,
11322 header rewriting and C source file generation. It should be much better
11323 than the old method: it now uses a modified version of Ulf's parser to
11324 read the ANSI prototypes in all header files (thus the old K&R definitions
11325 aren't needed for error creation any more) and do a better job of
11326 translating function codes into names. The old 'ASN1 error code imbedded
11327 in a comment' is no longer necessary and it doesn't use .err files which
11328 have now been deleted. Also the error code call doesn't have to appear all
11329 on one line (which resulted in some large lines...).
11332 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
11335 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
11336 0 (which usually indicates a closed connection), but continue reading.
11339 *) Fix some race conditions.
11342 *) Add support for CRL distribution points extension. Add Certificate
11343 Policies and CRL distribution points documentation.
11346 *) Move the autogenerated header file parts to crypto/opensslconf.h.
11349 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
11350 8 of keying material. Merlin has also confirmed interop with this fix
11351 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
11352 [Merlin Hughes <merlin@baltimore.ie>]
11354 *) Fix lots of warnings.
11355 [Richard Levitte <levitte@stacken.kth.se>]
11357 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
11358 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
11359 [Richard Levitte <levitte@stacken.kth.se>]
11361 *) Fix problems with sizeof(long) == 8.
11362 [Andy Polyakov <appro@fy.chalmers.se>]
11364 *) Change functions to ANSI C.
11367 *) Fix typos in error codes.
11368 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
11370 *) Remove defunct assembler files from Configure.
11373 *) SPARC v8 assembler BIGNUM implementation.
11374 [Andy Polyakov <appro@fy.chalmers.se>]
11376 *) Support for Certificate Policies extension: both print and set.
11377 Various additions to support the r2i method this uses.
11380 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
11381 return a const string when you are expecting an allocated buffer.
11384 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
11385 types DirectoryString and DisplayText.
11388 *) Add code to allow r2i extensions to access the configuration database,
11389 add an LHASH database driver and add several ctx helper functions.
11392 *) Fix an evil bug in bn_expand2() which caused various BN functions to
11393 fail when they extended the size of a BIGNUM.
11396 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
11397 support typesafe stack.
11400 *) Fix typo in SSL_[gs]et_options().
11401 [Nils Frostberg <nils@medcom.se>]
11403 *) Delete various functions and files that belonged to the (now obsolete)
11404 old X509V3 handling code.
11407 *) New Configure option "rsaref".
11410 *) Don't auto-generate pem.h.
11413 *) Introduce type-safe ASN.1 SETs.
11416 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
11417 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
11419 *) Introduce type-safe STACKs. This will almost certainly break lots of code
11420 that links with OpenSSL (well at least cause lots of warnings), but fear
11421 not: the conversion is trivial, and it eliminates loads of evil casts. A
11422 few STACKed things have been converted already. Feel free to convert more.
11423 In the fullness of time, I'll do away with the STACK type altogether.
11426 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
11427 specified in <certfile> by updating the entry in the index.txt file.
11428 This way one no longer has to edit the index.txt file manually for
11429 revoking a certificate. The -revoke option does the gory details now.
11430 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
11432 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
11433 `-text' option at all and this way the `-noout -text' combination was
11434 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
11435 [Ralf S. Engelschall]
11437 *) Make sure a corresponding plain text error message exists for the
11438 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
11439 verify callback function determined that a certificate was revoked.
11440 [Ralf S. Engelschall]
11442 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
11443 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
11444 all available cipers including rc5, which was forgotten until now.
11445 In order to let the testing shell script know which algorithms
11446 are available, a new (up to now undocumented) command
11447 "openssl list-cipher-commands" is used.
11450 *) Bugfix: s_client occasionally would sleep in select() when
11451 it should have checked SSL_pending() first.
11454 *) New functions DSA_do_sign and DSA_do_verify to provide access to
11455 the raw DSA values prior to ASN.1 encoding.
11458 *) Tweaks to Configure
11459 [Niels Poppe <niels@netbox.org>]
11461 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
11465 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
11468 *) New config option to avoid instructions that are illegal on the 80386.
11469 The default code is faster, but requires at least a 486.
11472 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
11473 SSL2_SERVER_VERSION (not used at all) macros, which are now the
11474 same as SSL2_VERSION anyway.
11477 *) New "-showcerts" option for s_client.
11480 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
11481 application. Various cleanups and fixes.
11484 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
11485 modify error routines to work internally. Add error codes and PBE init
11486 to library startup routines.
11489 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
11490 packing functions to asn1 and evp. Changed function names and error
11491 codes along the way.
11494 *) PKCS12 integration: and so it begins... First of several patches to
11495 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
11496 objects to objects.h
11499 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
11500 and display support for Thawte strong extranet extension.
11503 *) Add LinuxPPC support.
11504 [Jeff Dubrule <igor@pobox.org>]
11506 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
11507 bn_div_words in alpha.s.
11508 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
11510 *) Make sure the RSA OAEP test is skipped under -DRSAref because
11511 OAEP isn't supported when OpenSSL is built with RSAref.
11512 [Ulf Moeller <ulf@fitug.de>]
11514 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
11515 so they no longer are missing under -DNOPROTO.
11516 [Soren S. Jorvang <soren@t.dk>]
11519 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
11521 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
11522 doesn't work when the session is reused. Coming soon!
11525 *) Fix a security hole, that allows sessions to be reused in the wrong
11526 context thus bypassing client cert protection! All software that uses
11527 client certs and session caches in multiple contexts NEEDS PATCHING to
11528 allow session reuse! A fuller solution is in the works.
11529 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
11531 *) Some more source tree cleanups (removed obsolete files
11532 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
11533 permission on "config" script to be executable) and a fix for the INSTALL
11535 [Ulf Moeller <ulf@fitug.de>]
11537 *) Remove some legacy and erroneous uses of malloc, free instead of
11539 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
11541 *) Make rsa_oaep_test return non-zero on error.
11542 [Ulf Moeller <ulf@fitug.de>]
11544 *) Add support for native Solaris shared libraries. Configure
11545 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
11546 if someone would make that last step automatic.
11547 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
11549 *) ctx_size was not built with the right compiler during "make links". Fixed.
11552 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
11553 except NULL ciphers". This means the default cipher list will no longer
11554 enable NULL ciphers. They need to be specifically enabled e.g. with
11555 the string "DEFAULT:eNULL".
11558 *) Fix to RSA private encryption routines: if p < q then it would
11559 occasionally produce an invalid result. This will only happen with
11560 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
11563 *) Be less restrictive and allow also `perl util/perlpath.pl
11564 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
11565 because this way one can also use an interpreter named `perl5' (which is
11566 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
11567 installed as `perl').
11568 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11570 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
11571 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11573 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
11574 advapi32.lib to Win32 build and change the pem test comparison
11575 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
11576 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
11577 and crypto/des/ede_cbcm_enc.c.
11580 *) DES quad checksum was broken on big-endian architectures. Fixed.
11583 *) Comment out two functions in bio.h that aren't implemented. Fix up the
11584 Win32 test batch file so it (might) work again. The Win32 test batch file
11585 is horrible: I feel ill....
11588 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
11589 in e_os.h. Audit of header files to check ANSI and non ANSI
11590 sections: 10 functions were absent from non ANSI section and not exported
11591 from Windows DLLs. Fixed up libeay.num for new functions.
11594 *) Make `openssl version' output lines consistent.
11595 [Ralf S. Engelschall]
11597 *) Fix Win32 symbol export lists for BIO functions: Added
11598 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
11599 to ms/libeay{16,32}.def.
11600 [Ralf S. Engelschall]
11602 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
11603 fine under Unix and passes some trivial tests I've now added. But the
11604 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
11605 added to make sure no one expects that this stuff really works in the
11606 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
11607 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
11609 [Ralf S. Engelschall]
11611 *) Fix the generation of two part addresses in perl.
11612 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
11614 *) Add config entry for Linux on MIPS.
11615 [John Tobey <jtobey@channel1.com>]
11617 *) Make links whenever Configure is run, unless we are on Windoze.
11620 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
11621 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
11625 *) Add a useful kludge to allow package maintainers to specify compiler and
11626 other platforms details on the command line without having to patch the
11627 Configure script everytime: One now can use ``perl Configure
11628 <id>:<details>'', i.e. platform ids are allowed to have details appended
11629 to them (separated by colons). This is treated as there would be a static
11630 pre-configured entry in Configure's %table under key <id> with value
11631 <details> and ``perl Configure <id>'' is called. So, when you want to
11632 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
11633 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
11634 now, which overrides the FreeBSD-elf entry on-the-fly.
11635 [Ralf S. Engelschall]
11637 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
11640 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
11641 on the `perl Configure ...' command line. This way one can compile
11642 OpenSSL libraries with Position Independent Code (PIC) which is needed
11643 for linking it into DSOs.
11644 [Ralf S. Engelschall]
11646 *) Remarkably, export ciphers were totally broken and no-one had noticed!
11650 *) Cleaned up the LICENSE document: The official contact for any license
11651 questions now is the OpenSSL core team under openssl-core@openssl.org.
11652 And add a paragraph about the dual-license situation to make sure people
11653 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
11654 to the OpenSSL toolkit.
11655 [Ralf S. Engelschall]
11657 *) General source tree makefile cleanups: Made `making xxx in yyy...'
11658 display consistent in the source tree and replaced `/bin/rm' by `rm'.
11659 Additionally cleaned up the `make links' target: Remove unnecessary
11660 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
11661 to speed processing and no longer clutter the display with confusing
11662 stuff. Instead only the actually done links are displayed.
11663 [Ralf S. Engelschall]
11665 *) Permit null encryption ciphersuites, used for authentication only. It used
11666 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
11667 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
11671 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
11672 signed attributes when verifying signatures (this would break them),
11673 the detached data encoding was wrong and public keys obtained using
11674 X509_get_pubkey() weren't freed.
11677 *) Add text documentation for the BUFFER functions. Also added a work around
11678 to a Win95 console bug. This was triggered by the password read stuff: the
11679 last character typed gets carried over to the next fread(). If you were
11680 generating a new cert request using 'req' for example then the last
11681 character of the passphrase would be CR which would then enter the first
11685 *) Added the new `Includes OpenSSL Cryptography Software' button as
11686 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
11687 button and can be used by applications based on OpenSSL to show the
11688 relationship to the OpenSSL project.
11689 [Ralf S. Engelschall]
11691 *) Remove confusing variables in function signatures in files
11692 ssl/ssl_lib.c and ssl/ssl.h.
11693 [Lennart Bong <lob@kulthea.stacken.kth.se>]
11695 *) Don't install bss_file.c under PREFIX/include/
11696 [Lennart Bong <lob@kulthea.stacken.kth.se>]
11698 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
11699 functions that return function pointers and has support for NT specific
11700 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
11701 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
11702 unsigned to signed types: this was killing the Win32 compile.
11705 *) Add new certificate file to stack functions,
11706 SSL_add_dir_cert_subjects_to_stack() and
11707 SSL_add_file_cert_subjects_to_stack(). These largely supplant
11708 SSL_load_client_CA_file(), and can be used to add multiple certs easily
11709 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
11710 This means that Apache-SSL and similar packages don't have to mess around
11711 to add as many CAs as they want to the preferred list.
11714 *) Experiment with doxygen documentation. Currently only partially applied to
11716 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
11717 openssl.doxy as the configuration file.
11720 *) Get rid of remaining C++-style comments which strict C compilers hate.
11721 [Ralf S. Engelschall, pointed out by Carlos Amengual]
11723 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
11724 compiled in by default: it has problems with large keys.
11727 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
11728 DH private keys and/or callback functions which directly correspond to
11729 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
11730 is needed for applications which have to configure certificates on a
11731 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
11733 For the RSA certificate situation is makes no difference, but
11734 for the DSA certificate situation this fixes the "no shared cipher"
11735 problem where the OpenSSL cipher selection procedure failed because the
11736 temporary keys were not overtaken from the context and the API provided
11737 no way to reconfigure them.
11738 The new functions now let applications reconfigure the stuff and they
11739 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
11740 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
11741 non-public-API function ssl_cert_instantiate() is used as a helper
11742 function and also to reduce code redundancy inside ssl_rsa.c.
11743 [Ralf S. Engelschall]
11745 *) Move s_server -dcert and -dkey options out of the undocumented feature
11746 area because they are useful for the DSA situation and should be
11747 recognized by the users.
11748 [Ralf S. Engelschall]
11750 *) Fix the cipher decision scheme for export ciphers: the export bits are
11751 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
11752 SSL_EXP_MASK. So, the original variable has to be used instead of the
11753 already masked variable.
11754 [Richard Levitte <levitte@stacken.kth.se>]
11756 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
11757 [Richard Levitte <levitte@stacken.kth.se>]
11759 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
11760 from `int' to `unsigned int' because it's a length and initialized by
11761 EVP_DigestFinal() which expects an `unsigned int *'.
11762 [Richard Levitte <levitte@stacken.kth.se>]
11764 *) Don't hard-code path to Perl interpreter on shebang line of Configure
11765 script. Instead use the usual Shell->Perl transition trick.
11766 [Ralf S. Engelschall]
11768 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
11769 (in addition to RSA certificates) to match the behaviour of `openssl dsa
11770 -noout -modulus' as it's already the case for `openssl rsa -noout
11771 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
11772 currently the public key is printed (a decision which was already done by
11773 `openssl dsa -modulus' in the past) which serves a similar purpose.
11774 Additionally the NO_RSA no longer completely removes the whole -modulus
11775 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
11777 [Ralf S. Engelschall]
11779 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
11780 BIO. See the source (crypto/evp/bio_ok.c) for more info.
11781 [Arne Ansper <arne@ats.cyber.ee>]
11783 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
11784 to be added. Now both 'req' and 'ca' can use new objects defined in the
11788 *) Add cool BIO that does syslog (or event log on NT).
11789 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
11791 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
11792 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
11793 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
11794 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
11797 *) Add preliminary config info for new extension code.
11800 *) Make RSA_NO_PADDING really use no padding.
11801 [Ulf Moeller <ulf@fitug.de>]
11803 *) Generate errors when private/public key check is done.
11806 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
11807 for some CRL extensions and new objects added.
11810 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
11811 key usage extension and fuller support for authority key id.
11814 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
11815 padding method for RSA, which is recommended for new applications in PKCS
11816 #1 v2.0 (RFC 2437, October 1998).
11817 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
11818 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
11819 against Bleichbacher's attack on RSA.
11820 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
11823 *) Updates to the new SSL compression code
11824 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11826 *) Fix so that the version number in the master secret, when passed
11827 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
11828 (because the server will not accept higher), that the version number
11829 is 0x03,0x01, not 0x03,0x00
11830 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11832 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
11833 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
11834 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
11837 *) Support for RAW extensions where an arbitrary extension can be
11838 created by including its DER encoding. See apps/openssl.cnf for
11842 *) Make sure latest Perl versions don't interpret some generated C array
11843 code as Perl array code in the crypto/err/err_genc.pl script.
11844 [Lars Weber <3weber@informatik.uni-hamburg.de>]
11846 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
11847 not many people have the assembler. Various Win32 compilation fixes and
11848 update to the INSTALL.W32 file with (hopefully) more accurate Win32
11849 build instructions.
11852 *) Modify configure script 'Configure' to automatically create crypto/date.h
11853 file under Win32 and also build pem.h from pem.org. New script
11854 util/mkfiles.pl to create the MINFO file on environments that can't do a
11855 'make files': perl util/mkfiles.pl >MINFO should work.
11858 *) Major rework of DES function declarations, in the pursuit of correctness
11859 and purity. As a result, many evil casts evaporated, and some weirdness,
11860 too. You may find this causes warnings in your code. Zapping your evil
11861 casts will probably fix them. Mostly.
11864 *) Fix for a typo in asn1.h. Bug fix to object creation script
11865 obj_dat.pl. It considered a zero in an object definition to mean
11866 "end of object": none of the objects in objects.h have any zeros
11867 so it wasn't spotted.
11868 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
11870 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
11871 Masking (CBCM). In the absence of test vectors, the best I have been able
11872 to do is check that the decrypt undoes the encrypt, so far. Send me test
11873 vectors if you have them.
11876 *) Correct calculation of key length for export ciphers (too much space was
11877 allocated for null ciphers). This has not been tested!
11880 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
11881 message is now correct (it understands "crypto" and "ssl" on its
11882 command line). There is also now an "update" option. This will update
11883 the util/ssleay.num and util/libeay.num files with any new functions.
11885 perl util/mkdef.pl crypto ssl update
11886 it will update them.
11889 *) Overhauled the Perl interface (perl/*):
11890 - ported BN stuff to OpenSSL's different BN library
11891 - made the perl/ source tree CVS-aware
11892 - renamed the package from SSLeay to OpenSSL (the files still contain
11893 their history because I've copied them in the repository)
11894 - removed obsolete files (the test scripts will be replaced
11895 by better Test::Harness variants in the future)
11896 [Ralf S. Engelschall]
11898 *) First cut for a very conservative source tree cleanup:
11899 1. merge various obsolete readme texts into doc/ssleay.txt
11900 where we collect the old documents and readme texts.
11901 2. remove the first part of files where I'm already sure that we no
11902 longer need them because of three reasons: either they are just temporary
11903 files which were left by Eric or they are preserved original files where
11904 I've verified that the diff is also available in the CVS via "cvs diff
11905 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
11906 the crypto/md/ stuff).
11907 [Ralf S. Engelschall]
11909 *) More extension code. Incomplete support for subject and issuer alt
11910 name, issuer and authority key id. Change the i2v function parameters
11911 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
11912 what that's for :-) Fix to ASN1 macro which messed up
11913 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
11916 *) Preliminary support for ENUMERATED type. This is largely copied from the
11920 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
11921 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11923 *) Make sure `make rehash' target really finds the `openssl' program.
11924 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
11926 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
11927 like to hear about it if this slows down other processors.
11930 *) Add CygWin32 platform information to Configure script.
11931 [Alan Batie <batie@aahz.jf.intel.com>]
11933 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
11934 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
11936 *) New program nseq to manipulate netscape certificate sequences
11939 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
11943 *) Fixes to BN code. Previously the default was to define BN_RECURSION
11944 but the BN code had some problems that would cause failures when
11945 doing certificate verification and some other functions.
11946 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
11948 *) Add ASN1 and PEM code to support netscape certificate sequences.
11951 *) Add ASN1 and PEM code to support netscape certificate sequences.
11954 *) Add several PKIX and private extended key usage OIDs.
11957 *) Modify the 'ca' program to handle the new extension code. Modify
11958 openssl.cnf for new extension format, add comments.
11961 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
11962 and add a sample to openssl.cnf so req -x509 now adds appropriate
11966 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
11967 error code, add initial support to X509_print() and x509 application.
11970 *) Takes a deep breath and start adding X509 V3 extension support code. Add
11971 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
11972 stuff is currently isolated and isn't even compiled yet.
11975 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
11976 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
11977 Removed the versions check from X509 routines when loading extensions:
11978 this allows certain broken certificates that don't set the version
11979 properly to be processed.
11982 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
11983 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
11984 can still be regenerated with "make depend".
11987 *) Spelling mistake in C version of CAST-128.
11988 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
11990 *) Changes to the error generation code. The perl script err-code.pl
11991 now reads in the old error codes and retains the old numbers, only
11992 adding new ones if necessary. It also only changes the .err files if new
11993 codes are added. The makefiles have been modified to only insert errors
11994 when needed (to avoid needlessly modifying header files). This is done
11995 by only inserting errors if the .err file is newer than the auto generated
11996 C file. To rebuild all the error codes from scratch (the old behaviour)
11997 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
11998 or delete all the .err files.
12001 *) CAST-128 was incorrectly implemented for short keys. The C version has
12002 been fixed, but is untested. The assembler versions are also fixed, but
12003 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
12004 to regenerate it if needed.
12005 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
12006 Hagino <itojun@kame.net>]
12008 *) File was opened incorrectly in randfile.c.
12009 [Ulf Möller <ulf@fitug.de>]
12011 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
12012 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
12013 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
12014 al: it's just almost always a UTCTime. Note this patch adds new error
12015 codes so do a "make errors" if there are problems.
12018 *) Correct Linux 1 recognition in config.
12019 [Ulf Möller <ulf@fitug.de>]
12021 *) Remove pointless MD5 hash when using DSA keys in ca.
12022 [Anonymous <nobody@replay.com>]
12024 *) Generate an error if given an empty string as a cert directory. Also
12025 generate an error if handed NULL (previously returned 0 to indicate an
12026 error, but didn't set one).
12027 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
12029 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
12032 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
12033 parameters. This was causing a warning which killed off the Win32 compile.
12036 *) Remove C++ style comments from crypto/bn/bn_local.h.
12037 [Neil Costigan <neil.costigan@celocom.com>]
12039 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
12040 based on a text string, looking up short and long names and finally
12041 "dot" format. The "dot" format stuff didn't work. Added new function
12042 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
12043 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
12044 OID is not part of the table.
12047 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
12048 X509_LOOKUP_by_alias().
12051 *) Sort openssl functions by name.
12054 *) Get the gendsa program working (hopefully) and add it to app list. Remove
12055 encryption from sample DSA keys (in case anyone is interested the password
12059 *) Make _all_ *_free functions accept a NULL pointer.
12060 [Frans Heymans <fheymans@isaserver.be>]
12062 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
12064 [Anonymous <nobody@replay.com>]
12066 *) s_server should send the CAfile as acceptable CAs, not its own cert.
12067 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
12069 *) Don't blow it for numeric -newkey arguments to apps/req.
12070 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
12072 *) Temp key "for export" tests were wrong in s3_srvr.c.
12073 [Anonymous <nobody@replay.com>]
12075 *) Add prototype for temp key callback functions
12076 SSL_CTX_set_tmp_{rsa,dh}_callback().
12079 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
12080 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
12083 *) X509_name_add_entry() freed the wrong thing after an error.
12084 [Arne Ansper <arne@ats.cyber.ee>]
12086 *) rsa_eay.c would attempt to free a NULL context.
12087 [Arne Ansper <arne@ats.cyber.ee>]
12089 *) BIO_s_socket() had a broken should_retry() on Windoze.
12090 [Arne Ansper <arne@ats.cyber.ee>]
12092 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
12093 [Arne Ansper <arne@ats.cyber.ee>]
12095 *) Make sure the already existing X509_STORE->depth variable is initialized
12096 in X509_STORE_new(), but document the fact that this variable is still
12097 unused in the certificate verification process.
12098 [Ralf S. Engelschall]
12100 *) Fix the various library and apps files to free up pkeys obtained from
12101 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
12104 *) Fix reference counting in X509_PUBKEY_get(). This makes
12105 demos/maurice/example2.c work, amongst others, probably.
12106 [Steve Henson and Ben Laurie]
12108 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
12109 `openssl' and second, the shortcut symlinks for the `openssl <command>'
12110 are no longer created. This way we have a single and consistent command
12111 line interface `openssl <command>', similar to `cvs <command>'.
12112 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
12114 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
12115 BIT STRING wrapper always have zero unused bits.
12118 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
12121 *) Make the top-level INSTALL documentation easier to understand.
12124 *) Makefiles updated to exit if an error occurs in a sub-directory
12125 make (including if user presses ^C) [Paul Sutton]
12127 *) Make Montgomery context stuff explicit in RSA data structure.
12130 *) Fix build order of pem and err to allow for generated pem.h.
12133 *) Fix renumbering bug in X509_NAME_delete_entry().
12136 *) Enhanced the err-ins.pl script so it makes the error library number
12137 global and can add a library name. This is needed for external ASN1 and
12138 other error libraries.
12141 *) Fixed sk_insert which never worked properly.
12144 *) Fix ASN1 macros so they can handle indefinite length constructed
12145 EXPLICIT tags. Some non standard certificates use these: they can now
12149 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
12150 into a single doc/ssleay.txt bundle. This way the information is still
12151 preserved but no longer messes up this directory. Now it's new room for
12152 the new set of documentation files.
12153 [Ralf S. Engelschall]
12155 *) SETs were incorrectly DER encoded. This was a major pain, because they
12156 shared code with SEQUENCEs, which aren't coded the same. This means that
12157 almost everything to do with SETs or SEQUENCEs has either changed name or
12158 number of arguments.
12159 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
12161 *) Fix test data to work with the above.
12164 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
12165 was already fixed by Eric for 0.9.1 it seems.
12166 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
12168 *) Autodetect FreeBSD3.
12171 *) Fix various bugs in Configure. This affects the following platforms:
12175 unixware-2.0-pentium
12179 *) Eliminate generated files from CVS. Reorder tests to regenerate files
12180 before they are needed.
12183 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
12187 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
12189 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
12190 changed SSLeay to OpenSSL in version strings.
12191 [Ralf S. Engelschall]
12193 *) Some fixups to the top-level documents.
12196 *) Fixed the nasty bug where rsaref.h was not found under compile-time
12197 because the symlink to include/ was missing.
12198 [Ralf S. Engelschall]
12200 *) Incorporated the popular no-RSA/DSA-only patches
12201 which allow to compile a RSA-free SSLeay.
12202 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
12204 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
12205 when "ssleay" is still not found.
12206 [Ralf S. Engelschall]
12208 *) Added more platforms to Configure: Cray T3E, HPUX 11,
12209 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
12211 *) Updated the README file.
12212 [Ralf S. Engelschall]
12214 *) Added various .cvsignore files in the CVS repository subdirs
12215 to make a "cvs update" really silent.
12216 [Ralf S. Engelschall]
12218 *) Recompiled the error-definition header files and added
12219 missing symbols to the Win32 linker tables.
12220 [Ralf S. Engelschall]
12222 *) Cleaned up the top-level documents;
12223 o new files: CHANGES and LICENSE
12224 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
12225 o merged COPYRIGHT into LICENSE
12226 o removed obsolete TODO file
12227 o renamed MICROSOFT to INSTALL.W32
12228 [Ralf S. Engelschall]
12230 *) Removed dummy files from the 0.9.1b source tree:
12231 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
12232 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
12233 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
12234 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
12235 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
12236 [Ralf S. Engelschall]
12238 *) Added various platform portability fixes.
12241 *) The Genesis of the OpenSSL rpject:
12242 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
12243 Young and Tim J. Hudson created while they were working for C2Net until
12245 [The OpenSSL Project]
12248 Changes between 0.9.0b and 0.9.1b [not released]
12250 *) Updated a few CA certificates under certs/
12253 *) Changed some BIGNUM api stuff.
12256 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
12257 DGUX x86, Linux Alpha, etc.
12260 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
12261 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
12265 *) Add -strparse option to asn1pars program which parses nested
12267 [Dr Stephen Henson <shenson@bigfoot.com>]
12269 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
12272 *) DSA fix for "ca" program.
12275 *) Added "-genkey" option to "dsaparam" program.
12278 *) Added RIPE MD160 (rmd160) message digest.
12281 *) Added -a (all) option to "ssleay version" command.
12284 *) Added PLATFORM define which is the id given to Configure.
12287 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
12290 *) Extended the ASN.1 parser routines.
12293 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
12296 *) Added a BN_CTX to the BN library.
12299 *) Fixed the weak key values in DES library
12302 *) Changed API in EVP library for cipher aliases.
12305 *) Added support for RC2/64bit cipher.
12308 *) Converted the lhash library to the crypto/mem.c functions.
12311 *) Added more recognized ASN.1 object ids.
12314 *) Added more RSA padding checks for SSL/TLS.
12317 *) Added BIO proxy/filter functionality.
12320 *) Added extra_certs to SSL_CTX which can be used
12321 send extra CA certificates to the client in the CA cert chain sending
12322 process. It can be configured with SSL_CTX_add_extra_chain_cert().
12325 *) Now Fortezza is denied in the authentication phase because
12326 this is key exchange mechanism is not supported by SSLeay at all.
12329 *) Additional PKCS1 checks.
12332 *) Support the string "TLSv1" for all TLS v1 ciphers.
12335 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
12336 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
12339 *) Fixed a few memory leaks.
12342 *) Fixed various code and comment typos.
12345 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
12346 bytes sent in the client random.
12347 [Edward Bishop <ebishop@spyglass.com>]