5 Changes between 0.9.7 and 0.9.7a [XX xxx 2003]
7 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
8 checked on reconnect on the client side, therefore session resumption
9 could still fail with a "ssl session id is different" error. This
10 behaviour is masked when SSL_OP_ALL is used due to
11 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
12 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
16 *) IA-32 assembler support enhancements: unified ELF targets, support
17 for SCO/Caldera platforms, fix for Cygwin shared build.
20 *) Add support for FreeBSD on sparc64. As a consequence, support for
21 FreeBSD on non-x86 processors is separate from x86 processors on
22 the config script, much like the NetBSD support.
23 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
25 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
27 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
28 code (06) was taken as the first octet of the session ID and the last
29 octet was ignored consequently. As a result SSLv2 client side session
30 caching could not have worked due to the session ID mismatch between
32 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
36 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
37 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
41 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
42 seems that in spite of existing for more than a year, many application
43 author have done nothing to provide the necessary callbacks, which
44 means that this particular engine will not work properly anywhere.
45 This is a very unfortunate situation which forces us, in the name
46 of usability, to give the hw_ncipher.c a static lock, which is part
48 NOTE: This is for the 0.9.7 series ONLY. This hack will never
49 appear in 0.9.8 or later. We EXPECT application authors to have
50 dealt properly with this when 0.9.8 is released (unless we actually
51 make such changes in the libcrypto locking code that changes will
52 have to be made anyway).
55 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
56 octets have been read, EOF or an error occurs. Without this change
57 some truncated ASN1 structures will not produce an error.
60 *) Disable Heimdal support, since it hasn't been fully implemented.
61 Still give the possibility to force the use of Heimdal, but with
62 warnings and a request that patches get sent to openssl-dev.
65 *) Add the VC-CE target, introduce the WINCE sysname, and add
66 INSTALL.WCE and appropriate conditionals to make it build.
67 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
69 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
70 cygssl-x.y.z.dll, where x, y and z are the major, minor and
71 edit numbers of the version.
72 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
74 *) Introduce safe string copy and catenation functions
75 (BUF_strlcpy() and BUF_strlcat()).
76 [Ben Laurie (CHATS) and Richard Levitte]
78 *) Avoid using fixed-size buffers for one-line DNs.
81 *) Add BUF_MEM_grow_clean() to avoid information leakage when
82 resizing buffers containing secrets, and use where appropriate.
85 *) Avoid using fixed size buffers for configuration file location.
88 *) Avoid filename truncation for various CA files.
91 *) Use sizeof in preference to magic numbers.
94 *) Avoid filename truncation in cert requests.
97 *) Add assertions to check for (supposedly impossible) buffer
101 *) Don't cache truncated DNS entries in the local cache (this could
102 potentially lead to a spoofing attack).
105 *) Fix various buffers to be large enough for hex/decimal
106 representations in a platform independent manner.
109 *) Add CRYPTO_realloc_clean() to avoid information leakage when
110 resizing buffers containing secrets, and use where appropriate.
113 *) Add BIO_indent() to avoid much slightly worrying code to do
117 *) Convert sprintf()/BIO_puts() to BIO_printf().
120 *) buffer_gets() could terminate with the buffer only half
124 *) Add assertions to prevent user-supplied crypto functions from
125 overflowing internal buffers by having large block sizes, etc.
128 *) New OPENSSL_assert() macro (similar to assert(), but enabled
132 *) Eliminate unused copy of key in RC4.
135 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
138 *) Fix off-by-one error in EGD path.
141 *) If RANDFILE path is too long, ignore instead of truncating.
144 *) Eliminate unused and incorrectly sized X.509 structure
148 *) Eliminate unused and dangerous function knumber().
151 *) Eliminate unused and dangerous structure, KSSL_ERR.
154 *) Protect against overlong session ID context length in an encoded
155 session object. Since these are local, this does not appear to be
159 *) Change from security patch (see 0.9.6e below) that did not affect
160 the 0.9.6 release series:
162 Remote buffer overflow in SSL3 protocol - an attacker could
163 supply an oversized master key in Kerberos-enabled versions.
167 *) Change the SSL kerb5 codes to match RFC 2712.
170 *) Make -nameopt work fully for req and add -reqopt switch.
171 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
173 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
174 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
176 *) Make sure tests can be performed even if the corresponding algorithms
177 have been removed entirely. This was also the last step to make
178 OpenSSL compilable with DJGPP under all reasonable conditions.
179 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
181 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
182 to allow version independent disabling of normally unselected ciphers,
183 which may be activated as a side-effect of selecting a single cipher.
185 (E.g., cipher list string "RSA" enables ciphersuites that are left
186 out of "ALL" because they do not provide symmetric encryption.
187 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
188 [Lutz Jaenicke, Bodo Moeller]
190 *) Add appropriate support for separate platform-dependent build
191 directories. The recommended way to make a platform-dependent
192 build directory is the following (tested on Linux), maybe with
195 # Place yourself outside of the OpenSSL source tree. In
196 # this example, the environment variable OPENSSL_SOURCE
197 # is assumed to contain the absolute OpenSSL source directory.
198 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
199 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
200 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
201 mkdir -p `dirname $F`
202 ln -s $OPENSSL_SOURCE/$F $F
205 To be absolutely sure not to disturb the source tree, a "make clean"
206 is a good thing. If it isn't successfull, don't worry about it,
207 it probably means the source directory is very clean.
210 *) Make sure any ENGINE control commands make local copies of string
211 pointers passed to them whenever necessary. Otherwise it is possible
212 the caller may have overwritten (or deallocated) the original string
213 data when a later ENGINE operation tries to use the stored values.
214 [Götz Babin-Ebell <babinebell@trustcenter.de>]
216 *) Improve diagnostics in file reading and command-line digests.
217 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
219 *) Add AES modes CFB and OFB to the object database. Correct an
220 error in AES-CFB decryption.
223 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
224 allows existing EVP_CIPHER_CTX structures to be reused after
225 calling EVP_*Final(). This behaviour is used by encryption
226 BIOs and some applications. This has the side effect that
227 applications must explicitly clean up cipher contexts with
228 EVP_CIPHER_CTX_cleanup() or they will leak memory.
231 *) Check the values of dna and dnb in bn_mul_recursive before calling
232 bn_mul_comba (a non zero value means the a or b arrays do not contain
233 n2 elements) and fallback to bn_mul_normal if either is not zero.
236 *) Fix escaping of non-ASCII characters when using the -subj option
237 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
240 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
241 form for "surname", serialNumber has no short form.
242 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
243 therefore remove "mail" short name for "internet 7".
244 The OID for unique identifiers in X509 certificates is
245 x500UniqueIdentifier, not uniqueIdentifier.
246 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
249 *) Add an "init" command to the ENGINE config module and auto initialize
250 ENGINEs. Without any "init" command the ENGINE will be initialized
251 after all ctrl commands have been executed on it. If init=1 the
252 ENGINE is initailized at that point (ctrls before that point are run
253 on the uninitialized ENGINE and after on the initialized one). If
254 init=0 then the ENGINE will not be iniatialized at all.
257 *) Fix the 'app_verify_callback' interface so that the user-defined
258 argument is actually passed to the callback: In the
259 SSL_CTX_set_cert_verify_callback() prototype, the callback
260 declaration has been changed from
263 int (*cb)(X509_STORE_CTX *,void *);
264 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
265 i=s->ctx->app_verify_callback(&ctx)
266 has been changed into
267 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
269 To update applications using SSL_CTX_set_cert_verify_callback(),
270 a dummy argument can be added to their callback functions.
271 [D. K. Smetters <smetters@parc.xerox.com>]
273 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
274 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
276 *) Add and OPENSSL_LOAD_CONF define which will cause
277 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
278 This allows older applications to transparently support certain
279 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
280 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
281 load the config file and OPENSSL_add_all_algorithms_conf() which will
282 always load it have also been added.
285 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
286 Adjust NIDs and EVP layer.
287 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
289 *) Config modules support in openssl utility.
291 Most commands now load modules from the config file,
292 though in a few (such as version) this isn't done
293 because it couldn't be used for anything.
295 In the case of ca and req the config file used is
296 the same as the utility itself: that is the -config
297 command line option can be used to specify an
301 *) Move default behaviour from OPENSSL_config(). If appname is NULL
302 use "openssl_conf" if filename is NULL use default openssl config file.
305 *) Add an argument to OPENSSL_config() to allow the use of an alternative
306 config section name. Add a new flag to tolerate a missing config file
307 and move code to CONF_modules_load_file().
310 *) Support for crypto accelerator cards from Accelerated Encryption
311 Processing, www.aep.ie. (Use engine 'aep')
312 The support was copied from 0.9.6c [engine] and adapted/corrected
313 to work with the new engine framework.
314 [AEP Inc. and Richard Levitte]
316 *) Support for SureWare crypto accelerator cards from Baltimore
317 Technologies. (Use engine 'sureware')
318 The support was copied from 0.9.6c [engine] and adapted
319 to work with the new engine framework.
322 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
323 make the newer ENGINE framework commands for the CHIL engine work.
324 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
326 *) Make it possible to produce shared libraries on ReliantUNIX.
327 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
329 *) Add the configuration target debug-linux-ppro.
330 Make 'openssl rsa' use the general key loading routines
331 implemented in apps.c, and make those routines able to
332 handle the key format FORMAT_NETSCAPE and the variant
334 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
336 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
337 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
339 *) Add -keyform to rsautl, and document -engine.
340 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
342 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
343 BIO_R_NO_SUCH_FILE error code rather than the generic
344 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
349 ERR_peek_last_error_line
350 ERR_peek_last_error_line_data.
354 ERR_peek_error_line_data,
355 but report on the latest error recorded rather than the first one
356 still in the error queue.
357 [Ben Laurie, Bodo Moeller]
359 *) default_algorithms option in ENGINE config module. This allows things
361 default_algorithms = ALL
362 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
365 *) Prelminary ENGINE config module.
368 *) New experimental application configuration code.
371 *) Change the AES code to follow the same name structure as all other
372 symmetric ciphers, and behave the same way. Move everything to
373 the directory crypto/aes, thereby obsoleting crypto/rijndael.
374 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
376 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
377 [Ben Laurie and Theo de Raadt]
379 *) Add option to output public keys in req command.
380 [Massimiliano Pala madwolf@openca.org]
382 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
383 (up to about 10% better than before for P-192 and P-224).
386 *) New functions/macros
388 SSL_CTX_set_msg_callback(ctx, cb)
389 SSL_CTX_set_msg_callback_arg(ctx, arg)
390 SSL_set_msg_callback(ssl, cb)
391 SSL_set_msg_callback_arg(ssl, arg)
393 to request calling a callback function
395 void cb(int write_p, int version, int content_type,
396 const void *buf, size_t len, SSL *ssl, void *arg)
398 whenever a protocol message has been completely received
399 (write_p == 0) or sent (write_p == 1). Here 'version' is the
400 protocol version according to which the SSL library interprets
401 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
402 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
403 the content type as defined in the SSL 3.0/TLS 1.0 protocol
404 specification (change_cipher_spec(20), alert(21), handshake(22)).
405 'buf' and 'len' point to the actual message, 'ssl' to the
406 SSL object, and 'arg' is the application-defined value set by
407 SSL[_CTX]_set_msg_callback_arg().
409 'openssl s_client' and 'openssl s_server' have new '-msg' options
410 to enable a callback that displays all protocol messages.
413 *) Change the shared library support so shared libraries are built as
414 soon as the corresponding static library is finished, and thereby get
415 openssl and the test programs linked against the shared library.
416 This still only happens when the keyword "shard" has been given to
417 the configuration scripts.
419 NOTE: shared library support is still an experimental thing, and
420 backward binary compatibility is still not guaranteed.
421 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
423 *) Add support for Subject Information Access extension.
424 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
426 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
427 additional bytes when new memory had to be allocated, not just
428 when reusing an existing buffer.
431 *) New command line and configuration option 'utf8' for the req command.
432 This allows field values to be specified as UTF8 strings.
435 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
436 runs for the former and machine-readable output for the latter.
439 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
440 of the e-mail address in the DN (i.e., it will go into a certificate
441 extension only). The new configuration file option 'email_in_dn = no'
443 [Massimiliano Pala madwolf@openca.org]
445 *) Change all functions with names starting with des_ to be starting
446 with DES_ instead. Add wrappers that are compatible with libdes,
447 but are named _ossl_old_des_*. Finally, add macros that map the
448 des_* symbols to the corresponding _ossl_old_des_* if libdes
449 compatibility is desired. If OpenSSL 0.9.6c compatibility is
450 desired, the des_* symbols will be mapped to DES_*, with one
453 Since we provide two compatibility mappings, the user needs to
454 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
455 compatibility is desired. The default (i.e., when that macro
456 isn't defined) is OpenSSL 0.9.6c compatibility.
458 There are also macros that enable and disable the support of old
459 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
460 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
461 are defined, the default will apply: to support the old des routines.
463 In either case, one must include openssl/des.h to get the correct
464 definitions. Do not try to just include openssl/des_old.h, that
467 NOTE: This is a major break of an old API into a new one. Software
468 authors are encouraged to switch to the DES_ style functions. Some
469 time in the future, des_old.h and the libdes compatibility functions
470 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
471 default), and then completely removed.
474 *) Test for certificates which contain unsupported critical extensions.
475 If such a certificate is found during a verify operation it is
476 rejected by default: this behaviour can be overridden by either
477 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
478 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
479 X509_supported_extension() has also been added which returns 1 if a
480 particular extension is supported.
483 *) Modify the behaviour of EVP cipher functions in similar way to digests
484 to retain compatibility with existing code.
487 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
488 compatibility with existing code. In particular the 'ctx' parameter does
489 not have to be to be initialized before the call to EVP_DigestInit() and
490 it is tidied up after a call to EVP_DigestFinal(). New function
491 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
492 EVP_MD_CTX_copy() changed to not require the destination to be
493 initialized valid and new function EVP_MD_CTX_copy_ex() added which
494 requires the destination to be valid.
496 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
497 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
500 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
501 so that complete 'Handshake' protocol structures are kept in memory
502 instead of overwriting 'msg_type' and 'length' with 'body' data.
505 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
506 [Massimo Santin via Richard Levitte]
508 *) Major restructuring to the underlying ENGINE code. This includes
509 reduction of linker bloat, separation of pure "ENGINE" manipulation
510 (initialisation, etc) from functionality dealing with implementations
511 of specific crypto iterfaces. This change also introduces integrated
512 support for symmetric ciphers and digest implementations - so ENGINEs
513 can now accelerate these by providing EVP_CIPHER and EVP_MD
514 implementations of their own. This is detailed in crypto/engine/README
515 as it couldn't be adequately described here. However, there are a few
516 API changes worth noting - some RSA, DSA, DH, and RAND functions that
517 were changed in the original introduction of ENGINE code have now
518 reverted back - the hooking from this code to ENGINE is now a good
519 deal more passive and at run-time, operations deal directly with
520 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
521 dereferencing through an ENGINE pointer any more. Also, the ENGINE
522 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
523 they were not being used by the framework as there is no concept of a
524 BIGNUM_METHOD and they could not be generalised to the new
525 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
526 ENGINE_cpy() has been removed as it cannot be consistently defined in
530 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
533 *) Change mkdef.pl to sort symbols that get the same entry number,
534 and make sure the automatically generated functions ERR_load_*
535 become part of libeay.num as well.
538 *) New function SSL_renegotiate_pending(). This returns true once
539 renegotiation has been requested (either SSL_renegotiate() call
540 or HelloRequest/ClientHello receveived from the peer) and becomes
541 false once a handshake has been completed.
542 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
543 sends a HelloRequest, but does not ensure that a handshake takes
544 place. SSL_renegotiate_pending() is useful for checking if the
545 client has followed the request.)
548 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
549 By default, clients may request session resumption even during
550 renegotiation (if session ID contexts permit); with this option,
551 session resumption is possible only in the first handshake.
553 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
554 more bits available for options that should not be part of
555 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
558 *) Add some demos for certificate and certificate request creation.
561 *) Make maximum certificate chain size accepted from the peer application
562 settable (SSL*_get/set_max_cert_list()), as proposed by
563 "Douglas E. Engert" <deengert@anl.gov>.
566 *) Add support for shared libraries for Unixware-7
567 (Boyd Lynn Gerber <gerberb@zenez.com>).
570 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
571 be done prior to destruction. Use this to unload error strings from
572 ENGINEs that load their own error strings. NB: This adds two new API
573 functions to "get" and "set" this destroy handler in an ENGINE.
576 *) Alter all existing ENGINE implementations (except "openssl" and
577 "openbsd") to dynamically instantiate their own error strings. This
578 makes them more flexible to be built both as statically-linked ENGINEs
579 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
580 Also, add stub code to each that makes building them as self-contained
581 shared-libraries easier (see README.ENGINE).
584 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
585 implementations into applications that are completely implemented in
586 self-contained shared-libraries. The "dynamic" ENGINE exposes control
587 commands that can be used to configure what shared-library to load and
588 to control aspects of the way it is handled. Also, made an update to
589 the README.ENGINE file that brings its information up-to-date and
590 provides some information and instructions on the "dynamic" ENGINE
591 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
594 *) Make it possible to unload ranges of ERR strings with a new
595 "ERR_unload_strings" function.
598 *) Add a copy() function to EVP_MD.
601 *) Make EVP_MD routines take a context pointer instead of just the
602 md_data void pointer.
605 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
606 that the digest can only process a single chunk of data
607 (typically because it is provided by a piece of
608 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
609 is only going to provide a single chunk of data, and hence the
610 framework needn't accumulate the data for oneshot drivers.
613 *) As with "ERR", make it possible to replace the underlying "ex_data"
614 functions. This change also alters the storage and management of global
615 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
616 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
617 index counters. The API functions that use this state have been changed
618 to take a "class_index" rather than pointers to the class's local STACK
619 and counter, and there is now an API function to dynamically create new
620 classes. This centralisation allows us to (a) plug a lot of the
621 thread-safety problems that existed, and (b) makes it possible to clean
622 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
623 such data would previously have always leaked in application code and
624 workarounds were in place to make the memory debugging turn a blind eye
625 to it. Application code that doesn't use this new function will still
626 leak as before, but their memory debugging output will announce it now
627 rather than letting it slide.
629 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
630 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
631 has a return value to indicate success or failure.
634 *) Make it possible to replace the underlying "ERR" functions such that the
635 global state (2 LHASH tables and 2 locks) is only used by the "default"
636 implementation. This change also adds two functions to "get" and "set"
637 the implementation prior to it being automatically set the first time
638 any other ERR function takes place. Ie. an application can call "get",
639 pass the return value to a module it has just loaded, and that module
640 can call its own "set" function using that value. This means the
641 module's "ERR" operations will use (and modify) the error state in the
642 application and not in its own statically linked copy of OpenSSL code.
645 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
646 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
647 the operation, and provides a more encapsulated way for external code
648 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
649 to use these functions rather than manually incrementing the counts.
651 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
654 *) Add EVP test program.
657 *) Add symmetric cipher support to ENGINE. Expect the API to change!
660 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
661 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
662 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
663 These allow a CRL to be built without having to access X509_CRL fields
664 directly. Modify 'ca' application to use new functions.
667 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
668 bug workarounds. Rollback attack detection is a security feature.
669 The problem will only arise on OpenSSL servers when TLSv1 is not
670 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
671 Software authors not wanting to support TLSv1 will have special reasons
672 for their choice and can explicitly enable this option.
673 [Bodo Moeller, Lutz Jaenicke]
675 *) Rationalise EVP so it can be extended: don't include a union of
676 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
677 (similar to those existing for EVP_CIPHER_CTX).
682 EVP_MD_CTX_init(&md); /* new function call */
683 EVP_DigestInit(&md, EVP_sha1());
684 EVP_DigestUpdate(&md, in, len);
685 EVP_DigestFinal(&md, out, NULL);
686 EVP_MD_CTX_cleanup(&md); /* new function call */
690 *) Make DES key schedule conform to the usual scheme, as well as
691 correcting its structure. This means that calls to DES functions
692 now have to pass a pointer to a des_key_schedule instead of a
693 plain des_key_schedule (which was actually always a pointer
698 des_set_key_checked(..., &ks);
699 des_ncbc_encrypt(..., &ks, ...);
701 (Note that a later change renames 'des_...' into 'DES_...'.)
704 *) Initial reduction of linker bloat: the use of some functions, such as
705 PEM causes large amounts of unused functions to be linked in due to
706 poor organisation. For example pem_all.c contains every PEM function
707 which has a knock on effect of linking in large amounts of (unused)
708 ASN1 code. Grouping together similar functions and splitting unrelated
709 functions prevents this.
712 *) Cleanup of EVP macros.
715 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
719 *) Add initial OCSP responder support to ocsp application. The
720 revocation information is handled using the text based index
721 use by the ca application. The responder can either handle
722 requests generated internally, supplied in files (for example
723 via a CGI script) or using an internal minimal server.
726 *) Add configuration choices to get zlib compression for TLS.
729 *) Changes to Kerberos SSL for RFC 2712 compliance:
730 1. Implemented real KerberosWrapper, instead of just using
731 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
732 2. Implemented optional authenticator field of KerberosWrapper.
734 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
735 and authenticator structs; see crypto/krb5/.
737 Generalized Kerberos calls to support multiple Kerberos libraries.
738 [Vern Staats <staatsvr@asc.hpc.mil>,
739 Jeffrey Altman <jaltman@columbia.edu>
742 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
743 already does with RSA. testdsa.h now has 'priv_key/pub_key'
744 values for each of the key sizes rather than having just
745 parameters (and 'speed' generating keys each time).
748 *) Speed up EVP routines.
751 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
752 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
753 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
754 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
756 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
757 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
758 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
761 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
763 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
766 *) Added the OS2-EMX target.
767 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
769 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
770 to support NCONF routines in extension code. New function CONF_set_nconf()
771 to allow functions which take an NCONF to also handle the old LHASH
772 structure: this means that the old CONF compatible routines can be
773 retained (in particular wrt extensions) without having to duplicate the
774 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
777 *) Enhance the general user interface with mechanisms for inner control
778 and with possibilities to have yes/no kind of prompts.
781 *) Change all calls to low level digest routines in the library and
782 applications to use EVP. Add missing calls to HMAC_cleanup() and
783 don't assume HMAC_CTX can be copied using memcpy().
784 [Verdon Walker <VWalker@novell.com>, Steve Henson]
786 *) Add the possibility to control engines through control names but with
787 arbitrary arguments instead of just a string.
788 Change the key loaders to take a UI_METHOD instead of a callback
789 function pointer. NOTE: this breaks binary compatibility with earlier
790 versions of OpenSSL [engine].
791 Adapt the nCipher code for these new conditions and add a card insertion
795 *) Enhance the general user interface with mechanisms to better support
796 dialog box interfaces, application-defined prompts, the possibility
797 to use defaults (for example default passwords from somewhere else)
798 and interrupts/cancellations.
801 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
802 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
805 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
806 tidy up some unnecessarily weird code in 'sk_new()').
807 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
809 *) Change the key loading routines for ENGINEs to use the same kind
810 callback (pem_password_cb) as all other routines that need this
814 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
815 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
816 than this minimum value is recommended.
819 *) New random seeder for OpenVMS, using the system process statistics
820 that are easily reachable.
823 *) Windows apparently can't transparently handle global
824 variables defined in DLLs. Initialisations such as:
826 const ASN1_ITEM *it = &ASN1_INTEGER_it;
828 wont compile. This is used by the any applications that need to
829 declare their own ASN1 modules. This was fixed by adding the option
830 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
831 needed for static libraries under Win32.
834 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
835 setting of purpose and trust fields. New X509_STORE trust and
836 purpose functions and tidy up setting in other SSL functions.
839 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
840 structure. These are inherited by X509_STORE_CTX when it is
841 initialised. This allows various defaults to be set in the
842 X509_STORE structure (such as flags for CRL checking and custom
843 purpose or trust settings) for functions which only use X509_STORE_CTX
844 internally such as S/MIME.
846 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
847 trust settings if they are not set in X509_STORE. This allows X509_STORE
848 purposes and trust (in S/MIME for example) to override any set by default.
850 Add command line options for CRL checking to smime, s_client and s_server
854 *) Initial CRL based revocation checking. If the CRL checking flag(s)
855 are set then the CRL is looked up in the X509_STORE structure and
856 its validity and signature checked, then if the certificate is found
857 in the CRL the verify fails with a revoked error.
859 Various new CRL related callbacks added to X509_STORE_CTX structure.
861 Command line options added to 'verify' application to support this.
863 This needs some additional work, such as being able to handle multiple
864 CRLs with different times, extension based lookup (rather than just
865 by subject name) and ultimately more complete V2 CRL extension
869 *) Add a general user interface API (crypto/ui/). This is designed
870 to replace things like des_read_password and friends (backward
871 compatibility functions using this new API are provided).
872 The purpose is to remove prompting functions from the DES code
873 section as well as provide for prompting through dialog boxes in
874 a window system and the like.
877 *) Add "ex_data" support to ENGINE so implementations can add state at a
878 per-structure level rather than having to store it globally.
881 *) Make it possible for ENGINE structures to be copied when retrieved by
882 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
883 This causes the "original" ENGINE structure to act like a template,
884 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
885 operational state can be localised to each ENGINE structure, despite the
886 fact they all share the same "methods". New ENGINE structures returned in
887 this case have no functional references and the return value is the single
888 structural reference. This matches the single structural reference returned
889 by ENGINE_by_id() normally, when it is incremented on the pre-existing
893 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
894 needs to match any other type at all we need to manually clear the
898 *) Changes to the "openssl engine" utility to include;
899 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
900 about an ENGINE's available control commands.
901 - executing control commands from command line arguments using the
902 '-pre' and '-post' switches. '-post' is only used if '-t' is
903 specified and the ENGINE is successfully initialised. The syntax for
904 the individual commands are colon-separated, for example;
905 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
908 *) New dynamic control command support for ENGINEs. ENGINEs can now
909 declare their own commands (numbers), names (strings), descriptions,
910 and input types for run-time discovery by calling applications. A
911 subset of these commands are implicitly classed as "executable"
912 depending on their input type, and only these can be invoked through
913 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
914 can be based on user input, config files, etc). The distinction is
915 that "executable" commands cannot return anything other than a boolean
916 result and can only support numeric or string input, whereas some
917 discoverable commands may only be for direct use through
918 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
919 pointers, or other custom uses. The "executable" commands are to
920 support parameterisations of ENGINE behaviour that can be
921 unambiguously defined by ENGINEs and used consistently across any
922 OpenSSL-based application. Commands have been added to all the
923 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
924 control over shared-library paths without source code alterations.
927 *) Changed all ENGINE implementations to dynamically allocate their
928 ENGINEs rather than declaring them statically. Apart from this being
929 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
930 this also allows the implementations to compile without using the
931 internal engine_int.h header.
934 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
935 'const' value. Any code that should be able to modify a RAND_METHOD
936 should already have non-const pointers to it (ie. they should only
937 modify their own ones).
940 *) Made a variety of little tweaks to the ENGINE code.
941 - "atalla" and "ubsec" string definitions were moved from header files
942 to C code. "nuron" string definitions were placed in variables
943 rather than hard-coded - allowing parameterisation of these values
944 later on via ctrl() commands.
945 - Removed unused "#if 0"'d code.
946 - Fixed engine list iteration code so it uses ENGINE_free() to release
947 structural references.
948 - Constified the RAND_METHOD element of ENGINE structures.
949 - Constified various get/set functions as appropriate and added
950 missing functions (including a catch-all ENGINE_cpy that duplicates
951 all ENGINE values onto a new ENGINE except reference counts/state).
952 - Removed NULL parameter checks in get/set functions. Setting a method
953 or function to NULL is a way of cancelling out a previously set
954 value. Passing a NULL ENGINE parameter is just plain stupid anyway
955 and doesn't justify the extra error symbols and code.
956 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
957 flags from engine_int.h to engine.h.
958 - Changed prototypes for ENGINE handler functions (init(), finish(),
959 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
962 *) Implement binary inversion algorithm for BN_mod_inverse in addition
963 to the algorithm using long division. The binary algorithm can be
964 used only if the modulus is odd. On 32-bit systems, it is faster
965 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
966 roughly 5-15% for 256-bit moduli), so we use it only for moduli
967 up to 450 bits. In 64-bit environments, the binary algorithm
968 appears to be advantageous for much longer moduli; here we use it
969 for moduli up to 2048 bits.
972 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
973 could not support the combine flag in choice fields.
976 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
977 extensions from a certificate request to the certificate.
980 *) Allow multiple 'certopt' and 'nameopt' options to be separated
981 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
982 file: this allows the display of the certificate about to be
983 signed to be customised, to allow certain fields to be included
984 or excluded and extension details. The old system didn't display
985 multicharacter strings properly, omitted fields not in the policy
986 and couldn't display additional details such as extensions.
989 *) Function EC_POINTs_mul for multiple scalar multiplication
990 of an arbitrary number of elliptic curve points
991 \sum scalars[i]*points[i],
992 optionally including the generator defined for the EC_GROUP:
993 scalar*generator + \sum scalars[i]*points[i].
995 EC_POINT_mul is a simple wrapper function for the typical case
996 that the point list has just one item (besides the optional
1000 *) First EC_METHODs for curves over GF(p):
1002 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
1003 operations and provides various method functions that can also
1004 operate with faster implementations of modular arithmetic.
1006 EC_GFp_mont_method() reuses most functions that are part of
1007 EC_GFp_simple_method, but uses Montgomery arithmetic.
1009 [Bodo Moeller; point addition and point doubling
1010 implementation directly derived from source code provided by
1011 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
1013 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
1014 crypto/ec/ec_lib.c):
1016 Curves are EC_GROUP objects (with an optional group generator)
1017 based on EC_METHODs that are built into the library.
1019 Points are EC_POINT objects based on EC_GROUP objects.
1021 Most of the framework would be able to handle curves over arbitrary
1022 finite fields, but as there are no obvious types for fields other
1023 than GF(p), some functions are limited to that for now.
1026 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
1027 that the file contains a complete HTTP response.
1030 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
1031 change the def and num file printf format specifier from "%-40sXXX"
1032 to "%-39s XXX". The latter will always guarantee a space after the
1033 field while the former will cause them to run together if the field
1034 is 40 of more characters long.
1037 *) Constify the cipher and digest 'method' functions and structures
1038 and modify related functions to take constant EVP_MD and EVP_CIPHER
1042 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
1043 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
1046 *) Modify EVP_Digest*() routines so they now return values. Although the
1047 internal software routines can never fail additional hardware versions
1051 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
1053 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
1054 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
1057 ERR_R_NESTED_ASN1_ERROR
1059 ERR_R_MISSING_ASN1_EOS
1060 were 4 .. 9, conflicting with
1061 ERR_LIB_RSA (= ERR_R_RSA_LIB)
1063 ERR_LIB_PEM (= ERR_R_PEM_LIB).
1064 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
1066 Add new error code 'ERR_R_INTERNAL_ERROR'.
1069 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
1073 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
1074 sets the subject name for a new request or supersedes the
1075 subject name in a given request. Formats that can be parsed are
1076 'CN=Some Name, OU=myOU, C=IT'
1078 'CN=Some Name/OU=myOU/C=IT'.
1080 Add options '-batch' and '-verbose' to 'openssl req'.
1081 [Massimiliano Pala <madwolf@hackmasters.net>]
1083 *) Introduce the possibility to access global variables through
1084 functions on platform were that's the best way to handle exporting
1085 global variables in shared libraries. To enable this functionality,
1086 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
1087 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
1088 is normally done by Configure or something similar).
1090 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
1091 in the source file (foo.c) like this:
1093 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
1094 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
1096 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
1097 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
1099 OPENSSL_DECLARE_GLOBAL(int,foo);
1100 #define foo OPENSSL_GLOBAL_REF(foo)
1101 OPENSSL_DECLARE_GLOBAL(double,bar);
1102 #define bar OPENSSL_GLOBAL_REF(bar)
1104 The #defines are very important, and therefore so is including the
1105 header file everywhere where the defined globals are used.
1107 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
1108 of ASN.1 items, but that structure is a bit different.
1110 The largest change is in util/mkdef.pl which has been enhanced with
1111 better and easier to understand logic to choose which symbols should
1112 go into the Windows .def files as well as a number of fixes and code
1113 cleanup (among others, algorithm keywords are now sorted
1114 lexicographically to avoid constant rewrites).
1117 *) In BN_div() keep a copy of the sign of 'num' before writing the
1118 result to 'rm' because if rm==num the value will be overwritten
1119 and produce the wrong result if 'num' is negative: this caused
1120 problems with BN_mod() and BN_nnmod().
1123 *) Function OCSP_request_verify(). This checks the signature on an
1124 OCSP request and verifies the signer certificate. The signer
1125 certificate is just checked for a generic purpose and OCSP request
1129 *) Add OCSP_check_validity() function to check the validity of OCSP
1130 responses. OCSP responses are prepared in real time and may only
1131 be a few seconds old. Simply checking that the current time lies
1132 between thisUpdate and nextUpdate max reject otherwise valid responses
1133 caused by either OCSP responder or client clock inaccuracy. Instead
1134 we allow thisUpdate and nextUpdate to fall within a certain period of
1135 the current time. The age of the response can also optionally be
1136 checked. Two new options -validity_period and -status_age added to
1140 *) If signature or public key algorithm is unrecognized print out its
1141 OID rather that just UNKNOWN.
1144 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
1145 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
1146 ID to be generated from the issuer certificate alone which can then be
1147 passed to OCSP_id_issuer_cmp().
1150 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
1151 ASN1 modules to export functions returning ASN1_ITEM pointers
1152 instead of the ASN1_ITEM structures themselves. This adds several
1153 new macros which allow the underlying ASN1 function/structure to
1154 be accessed transparently. As a result code should not use ASN1_ITEM
1155 references directly (such as &X509_it) but instead use the relevant
1156 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
1157 use of the new ASN1 code on platforms where exporting structures
1158 is problematical (for example in shared libraries) but exporting
1159 functions returning pointers to structures is not.
1162 *) Add support for overriding the generation of SSL/TLS session IDs.
1163 These callbacks can be registered either in an SSL_CTX or per SSL.
1164 The purpose of this is to allow applications to control, if they wish,
1165 the arbitrary values chosen for use as session IDs, particularly as it
1166 can be useful for session caching in multiple-server environments. A
1167 command-line switch for testing this (and any client code that wishes
1168 to use such a feature) has been added to "s_server".
1169 [Geoff Thorpe, Lutz Jaenicke]
1171 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
1172 of the form '#if defined(...) || defined(...) || ...' and
1173 '#if !defined(...) && !defined(...) && ...'. This also avoids
1174 the growing number of special cases it was previously handling.
1177 *) Make all configuration macros available for application by making
1178 sure they are available in opensslconf.h, by giving them names starting
1179 with "OPENSSL_" to avoid conflicts with other packages and by making
1180 sure e_os2.h will cover all platform-specific cases together with
1182 Additionally, it is now possible to define configuration/platform-
1183 specific names (called "system identities"). In the C code, these
1184 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
1185 macro with the name beginning with "OPENSSL_SYS_", which is determined
1186 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
1190 *) New option -set_serial to 'req' and 'x509' this allows the serial
1191 number to use to be specified on the command line. Previously self
1192 signed certificates were hard coded with serial number 0 and the
1193 CA options of 'x509' had to use a serial number in a file which was
1197 *) New options to 'ca' utility to support V2 CRL entry extensions.
1198 Currently CRL reason, invalidity date and hold instruction are
1199 supported. Add new CRL extensions to V3 code and some new objects.
1202 *) New function EVP_CIPHER_CTX_set_padding() this is used to
1203 disable standard block padding (aka PKCS#5 padding) in the EVP
1204 API, which was previously mandatory. This means that the data is
1205 not padded in any way and so the total length much be a multiple
1206 of the block size, otherwise an error occurs.
1209 *) Initial (incomplete) OCSP SSL support.
1212 *) New function OCSP_parse_url(). This splits up a URL into its host,
1213 port and path components: primarily to parse OCSP URLs. New -url
1214 option to ocsp utility.
1217 *) New nonce behavior. The return value of OCSP_check_nonce() now
1218 reflects the various checks performed. Applications can decide
1219 whether to tolerate certain situations such as an absent nonce
1220 in a response when one was present in a request: the ocsp application
1221 just prints out a warning. New function OCSP_add1_basic_nonce()
1222 this is to allow responders to include a nonce in a response even if
1223 the request is nonce-less.
1226 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
1227 skipped when using openssl x509 multiple times on a single input file,
1228 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
1231 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
1232 set string type: to handle setting ASN1_TIME structures. Fix ca
1233 utility to correctly initialize revocation date of CRLs.
1236 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
1237 the clients preferred ciphersuites and rather use its own preferences.
1238 Should help to work around M$ SGC (Server Gated Cryptography) bug in
1239 Internet Explorer by ensuring unchanged hash method during stepup.
1240 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
1243 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
1244 to aes and add a new 'exist' option to print out symbols that don't
1248 *) Additional options to ocsp utility to allow flags to be set and
1249 additional certificates supplied.
1252 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
1253 OCSP client a number of certificate to only verify the response
1257 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
1258 handle the new API. Currently only ECB, CBC modes supported. Add new
1261 Add TLS AES ciphersuites as described in RFC3268, "Advanced
1262 Encryption Standard (AES) Ciphersuites for Transport Layer
1263 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
1264 not enabled by default and were not part of the "ALL" ciphersuite
1265 alias because they were not yet official; they could be
1266 explicitly requested by specifying the "AESdraft" ciphersuite
1267 group alias. In the final release of OpenSSL 0.9.7, the group
1268 alias is called "AES" and is part of "ALL".)
1269 [Ben Laurie, Steve Henson, Bodo Moeller]
1271 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
1272 request to response.
1275 *) Functions for OCSP responders. OCSP_request_onereq_count(),
1276 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
1277 extract information from a certificate request. OCSP_response_create()
1278 creates a response and optionally adds a basic response structure.
1279 OCSP_basic_add1_status() adds a complete single response to a basic
1280 response and returns the OCSP_SINGLERESP structure just added (to allow
1281 extensions to be included for example). OCSP_basic_add1_cert() adds a
1282 certificate to a basic response and OCSP_basic_sign() signs a basic
1283 response with various flags. New helper functions ASN1_TIME_check()
1284 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
1285 (converts ASN1_TIME to GeneralizedTime).
1288 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
1289 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
1290 structure from a certificate. X509_pubkey_digest() digests the public_key
1291 contents: this is used in various key identifiers.
1294 *) Make sk_sort() tolerate a NULL argument.
1295 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
1297 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
1298 passed by the function are trusted implicitly. If any of them signed the
1299 response then it is assumed to be valid and is not verified.
1302 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
1303 to data. This was previously part of the PKCS7 ASN1 code. This
1304 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
1305 [Steve Henson, reported by Kenneth R. Robinette
1306 <support@securenetterm.com>]
1308 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
1309 routines: without these tracing memory leaks is very painful.
1310 Fix leaks in PKCS12 and PKCS7 routines.
1313 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
1314 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
1315 effectively meant GeneralizedTime would never be used. Now it
1316 is initialised to -1 but X509_time_adj() now has to check the value
1317 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
1318 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
1319 [Steve Henson, reported by Kenneth R. Robinette
1320 <support@securenetterm.com>]
1322 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
1323 result in a zero length in the ASN1_INTEGER structure which was
1324 not consistent with the structure when d2i_ASN1_INTEGER() was used
1325 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
1326 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
1327 where it did not print out a minus for negative ASN1_INTEGER.
1330 *) Add summary printout to ocsp utility. The various functions which
1331 convert status values to strings have been renamed to:
1332 OCSP_response_status_str(), OCSP_cert_status_str() and
1333 OCSP_crl_reason_str() and are no longer static. New options
1334 to verify nonce values and to disable verification. OCSP response
1335 printout format cleaned up.
1338 *) Add additional OCSP certificate checks. These are those specified
1339 in RFC2560. This consists of two separate checks: the CA of the
1340 certificate being checked must either be the OCSP signer certificate
1341 or the issuer of the OCSP signer certificate. In the latter case the
1342 OCSP signer certificate must contain the OCSP signing extended key
1343 usage. This check is performed by attempting to match the OCSP
1344 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
1345 in the OCSP_CERTID structures of the response.
1348 *) Initial OCSP certificate verification added to OCSP_basic_verify()
1349 and related routines. This uses the standard OpenSSL certificate
1350 verify routines to perform initial checks (just CA validity) and
1351 to obtain the certificate chain. Then additional checks will be
1352 performed on the chain. Currently the root CA is checked to see
1353 if it is explicitly trusted for OCSP signing. This is used to set
1354 a root CA as a global signing root: that is any certificate that
1355 chains to that CA is an acceptable OCSP signing certificate.
1358 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
1359 extensions from a separate configuration file.
1360 As when reading extensions from the main configuration file,
1361 the '-extensions ...' option may be used for specifying the
1363 [Massimiliano Pala <madwolf@comune.modena.it>]
1365 *) New OCSP utility. Allows OCSP requests to be generated or
1366 read. The request can be sent to a responder and the output
1367 parsed, outputed or printed in text form. Not complete yet:
1368 still needs to check the OCSP response validity.
1371 *) New subcommands for 'openssl ca':
1372 'openssl ca -status <serial>' prints the status of the cert with
1373 the given serial number (according to the index file).
1374 'openssl ca -updatedb' updates the expiry status of certificates
1376 [Massimiliano Pala <madwolf@comune.modena.it>]
1378 *) New '-newreq-nodes' command option to CA.pl. This is like
1379 '-newreq', but calls 'openssl req' with the '-nodes' option
1380 so that the resulting key is not encrypted.
1381 [Damien Miller <djm@mindrot.org>]
1383 *) New configuration for the GNU Hurd.
1384 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
1386 *) Initial code to implement OCSP basic response verify. This
1387 is currently incomplete. Currently just finds the signer's
1388 certificate and verifies the signature on the response.
1391 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
1392 value of OPENSSLDIR. This is available via the new '-d' option
1393 to 'openssl version', and is also included in 'openssl version -a'.
1396 *) Allowing defining memory allocation callbacks that will be given
1397 file name and line number information in additional arguments
1398 (a const char* and an int). The basic functionality remains, as
1399 well as the original possibility to just replace malloc(),
1400 realloc() and free() by functions that do not know about these
1401 additional arguments. To register and find out the current
1402 settings for extended allocation functions, the following
1403 functions are provided:
1405 CRYPTO_set_mem_ex_functions
1406 CRYPTO_set_locked_mem_ex_functions
1407 CRYPTO_get_mem_ex_functions
1408 CRYPTO_get_locked_mem_ex_functions
1410 These work the same way as CRYPTO_set_mem_functions and friends.
1411 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
1412 extended allocation function is enabled.
1413 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
1414 a conventional allocation function is enabled.
1415 [Richard Levitte, Bodo Moeller]
1417 *) Finish off removing the remaining LHASH function pointer casts.
1418 There should no longer be any prototype-casting required when using
1419 the LHASH abstraction, and any casts that remain are "bugs". See
1420 the callback types and macros at the head of lhash.h for details
1421 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
1424 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
1425 If /dev/[u]random devices are not available or do not return enough
1426 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
1428 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
1429 /etc/entropy will be queried once each in this sequence, quering stops
1430 when enough entropy was collected without querying more sockets.
1433 *) Change the Unix RAND_poll() variant to be able to poll several
1434 random devices, as specified by DEVRANDOM, until a sufficient amount
1435 of data has been collected. We spend at most 10 ms on each file
1436 (select timeout) and read in non-blocking mode. DEVRANDOM now
1437 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
1438 (previously it was just the string "/dev/urandom"), so on typical
1439 platforms the 10 ms delay will never occur.
1440 Also separate out the Unix variant to its own file, rand_unix.c.
1441 For VMS, there's a currently-empty rand_vms.c.
1444 *) Move OCSP client related routines to ocsp_cl.c. These
1445 provide utility functions which an application needing
1446 to issue a request to an OCSP responder and analyse the
1447 response will typically need: as opposed to those which an
1448 OCSP responder itself would need which will be added later.
1450 OCSP_request_sign() signs an OCSP request with an API similar
1451 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
1452 response. OCSP_response_get1_basic() extracts basic response
1453 from response. OCSP_resp_find_status(): finds and extracts status
1454 information from an OCSP_CERTID structure (which will be created
1455 when the request structure is built). These are built from lower
1456 level functions which work on OCSP_SINGLERESP structures but
1457 wont normally be used unless the application wishes to examine
1458 extensions in the OCSP response for example.
1460 Replace nonce routines with a pair of functions.
1461 OCSP_request_add1_nonce() adds a nonce value and optionally
1462 generates a random value. OCSP_check_nonce() checks the
1463 validity of the nonce in an OCSP response.
1466 *) Change function OCSP_request_add() to OCSP_request_add0_id().
1467 This doesn't copy the supplied OCSP_CERTID and avoids the
1468 need to free up the newly created id. Change return type
1469 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
1470 This can then be used to add extensions to the request.
1471 Deleted OCSP_request_new(), since most of its functionality
1472 is now in OCSP_REQUEST_new() (and the case insensitive name
1473 clash) apart from the ability to set the request name which
1474 will be added elsewhere.
1477 *) Update OCSP API. Remove obsolete extensions argument from
1478 various functions. Extensions are now handled using the new
1479 OCSP extension code. New simple OCSP HTTP function which
1480 can be used to send requests and parse the response.
1483 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
1484 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
1485 uses the special reorder version of SET OF to sort the attributes
1486 and reorder them to match the encoded order. This resolves a long
1487 standing problem: a verify on a PKCS7 structure just after signing
1488 it used to fail because the attribute order did not match the
1489 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
1490 it uses the received order. This is necessary to tolerate some broken
1491 software that does not order SET OF. This is handled by encoding
1492 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
1493 to produce the required SET OF.
1496 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
1497 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
1498 files to get correct declarations of the ASN.1 item variables.
1501 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
1502 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
1503 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
1504 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
1505 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
1506 ASN1_ITEM and no wrapper functions.
1509 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
1510 replace the old function pointer based I/O routines. Change most of
1511 the *_d2i_bio() and *_d2i_fp() functions to use these.
1514 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
1515 lines, recognice more "algorithms" that can be deselected, and make
1516 it complain about algorithm deselection that isn't recognised.
1519 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
1520 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
1521 to use new functions. Add NO_ASN1_OLD which can be set to remove
1522 some old style ASN1 functions: this can be used to determine if old
1523 code will still work when these eventually go away.
1526 *) New extension functions for OCSP structures, these follow the
1527 same conventions as certificates and CRLs.
1530 *) New function X509V3_add1_i2d(). This automatically encodes and
1531 adds an extension. Its behaviour can be customised with various
1532 flags to append, replace or delete. Various wrappers added for
1533 certifcates and CRLs.
1536 *) Fix to avoid calling the underlying ASN1 print routine when
1537 an extension cannot be parsed. Correct a typo in the
1538 OCSP_SERVICELOC extension. Tidy up print OCSP format.
1541 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
1542 entries for variables.
1545 *) Add functionality to apps/openssl.c for detecting locking
1546 problems: As the program is single-threaded, all we have
1547 to do is register a locking callback using an array for
1548 storing which locks are currently held by the program.
1551 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
1552 SSL_get_ex_data_X509_STORE_idx(), which is used in
1553 ssl_verify_cert_chain() and thus can be called at any time
1554 during TLS/SSL handshakes so that thread-safety is essential.
1555 Unfortunately, the ex_data design is not at all suited
1556 for multi-threaded use, so it probably should be abolished.
1559 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
1560 [Broadcom, tweaked and integrated by Geoff Thorpe]
1562 *) Move common extension printing code to new function
1563 X509V3_print_extensions(). Reorganise OCSP print routines and
1564 implement some needed OCSP ASN1 functions. Add OCSP extensions.
1567 *) New function X509_signature_print() to remove duplication in some
1571 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
1572 set (this was treated exactly the same as SET OF previously). This
1573 is used to reorder the STACK representing the structure to match the
1574 encoding. This will be used to get round a problem where a PKCS7
1575 structure which was signed could not be verified because the STACK
1576 order did not reflect the encoded order.
1579 *) Reimplement the OCSP ASN1 module using the new code.
1582 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
1583 for its ASN1 operations. The old style function pointers still exist
1584 for now but they will eventually go away.
1587 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
1588 completely replaces the old ASN1 functionality with a table driven
1589 encoder and decoder which interprets an ASN1_ITEM structure describing
1590 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
1591 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
1592 has also been converted to the new form.
1595 *) Change BN_mod_exp_recp so that negative moduli are tolerated
1596 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
1597 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
1598 for negative moduli.
1601 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
1602 of not touching the result's sign bit.
1605 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
1609 *) Changed the LHASH code to use prototypes for callbacks, and created
1610 macros to declare and implement thin (optionally static) functions
1611 that provide type-safety and avoid function pointer casting for the
1612 type-specific callbacks.
1615 *) Added Kerberos Cipher Suites to be used with TLS, as written in
1617 [Veers Staats <staatsvr@asc.hpc.mil>,
1618 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
1620 *) Reformat the FAQ so the different questions and answers can be divided
1621 in sections depending on the subject.
1624 *) Have the zlib compression code load ZLIB.DLL dynamically under
1628 *) New function BN_mod_sqrt for computing square roots modulo a prime
1629 (using the probabilistic Tonelli-Shanks algorithm unless
1630 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
1631 be handled deterministically).
1632 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
1634 *) Make BN_mod_inverse faster by explicitly handling small quotients
1635 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
1636 512 bits], about 30% for larger ones [1024 or 2048 bits].)
1639 *) New function BN_kronecker.
1642 *) Fix BN_gcd so that it works on negative inputs; the result is
1643 positive unless both parameters are zero.
1644 Previously something reasonably close to an infinite loop was
1645 possible because numbers could be growing instead of shrinking
1646 in the implementation of Euclid's algorithm.
1649 *) Fix BN_is_word() and BN_is_one() macros to take into account the
1650 sign of the number in question.
1652 Fix BN_is_word(a,w) to work correctly for w == 0.
1654 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
1655 because its test if the absolute value of 'a' equals 'w'.
1656 Note that BN_abs_is_word does *not* handle w == 0 reliably;
1657 it exists mostly for use in the implementations of BN_is_zero(),
1658 BN_is_one(), and BN_is_word().
1661 *) New function BN_swap.
1664 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
1665 the exponentiation functions are more likely to produce reasonable
1666 results on negative inputs.
1669 *) Change BN_mod_mul so that the result is always non-negative.
1670 Previously, it could be negative if one of the factors was negative;
1671 I don't think anyone really wanted that behaviour.
1674 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
1675 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
1676 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
1677 and add new functions:
1686 BN_mod_lshift1_quick
1690 These functions always generate non-negative results.
1692 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
1693 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
1695 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
1696 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
1697 be reduced modulo m.
1698 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
1700 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
1701 was actually never needed) and in BN_mul(). The removal in BN_mul()
1702 required a small change in bn_mul_part_recursive() and the addition
1703 of the functions bn_cmp_part_words(), bn_sub_part_words() and
1704 bn_add_part_words(), which do the same thing as bn_cmp_words(),
1705 bn_sub_words() and bn_add_words() except they take arrays with
1709 *) In 'openssl passwd', verify passwords read from the terminal
1710 unless the '-salt' option is used (which usually means that
1711 verification would just waste user's time since the resulting
1712 hash is going to be compared with some given password hash)
1713 or the new '-noverify' option is used.
1715 This is an incompatible change, but it does not affect
1716 non-interactive use of 'openssl passwd' (passwords on the command
1717 line, '-stdin' option, '-in ...' option) and thus should not
1721 *) Remove all references to RSAref, since there's no more need for it.
1724 *) Make DSO load along a path given through an environment variable
1725 (SHLIB_PATH) with shl_load().
1728 *) Constify the ENGINE code as a result of BIGNUM constification.
1729 Also constify the RSA code and most things related to it. In a
1730 few places, most notable in the depth of the ASN.1 code, ugly
1731 casts back to non-const were required (to be solved at a later
1735 *) Make it so the openssl application has all engines loaded by default.
1738 *) Constify the BIGNUM routines a little more.
1741 *) Add the following functions:
1743 ENGINE_load_cswift()
1745 ENGINE_load_atalla()
1747 ENGINE_load_builtin_engines()
1749 That way, an application can itself choose if external engines that
1750 are built-in in OpenSSL shall ever be used or not. The benefit is
1751 that applications won't have to be linked with libdl or other dso
1752 libraries unless it's really needed.
1754 Changed 'openssl engine' to load all engines on demand.
1755 Changed the engine header files to avoid the duplication of some
1756 declarations (they differed!).
1759 *) 'openssl engine' can now list capabilities.
1762 *) Better error reporting in 'openssl engine'.
1765 *) Never call load_dh_param(NULL) in s_server.
1768 *) Add engine application. It can currently list engines by name and
1769 identity, and test if they are actually available.
1772 *) Improve RPM specification file by forcing symbolic linking and making
1773 sure the installed documentation is also owned by root.root.
1774 [Damien Miller <djm@mindrot.org>]
1776 *) Give the OpenSSL applications more possibilities to make use of
1777 keys (public as well as private) handled by engines.
1780 *) Add OCSP code that comes from CertCo.
1783 *) Add VMS support for the Rijndael code.
1786 *) Added untested support for Nuron crypto accelerator.
1789 *) Add support for external cryptographic devices. This code was
1790 previously distributed separately as the "engine" branch.
1791 [Geoff Thorpe, Richard Levitte]
1793 *) Rework the filename-translation in the DSO code. It is now possible to
1794 have far greater control over how a "name" is turned into a filename
1795 depending on the operating environment and any oddities about the
1796 different shared library filenames on each system.
1799 *) Support threads on FreeBSD-elf in Configure.
1802 *) Fix for SHA1 assembly problem with MASM: it produces
1803 warnings about corrupt line number information when assembling
1804 with debugging information. This is caused by the overlapping
1806 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
1809 NCONF_get_number() has no error checking at all. As a replacement,
1810 NCONF_get_number_e() is defined (_e for "error checking") and is
1811 promoted strongly. The old NCONF_get_number is kept around for
1812 binary backward compatibility.
1813 Make it possible for methods to load from something other than a BIO,
1814 by providing a function pointer that is given a name instead of a BIO.
1815 For example, this could be used to load configuration data from an
1819 *) Fix for non blocking accept BIOs. Added new I/O special reason
1820 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
1821 with non blocking I/O was not possible because no retry code was
1822 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
1826 *) Added the beginnings of Rijndael support.
1829 *) Fix for bug in DirectoryString mask setting. Add support for
1830 X509_NAME_print_ex() in 'req' and X509_print_ex() function
1831 to allow certificate printing to more controllable, additional
1832 'certopt' option to 'x509' to allow new printing options to be
1836 *) Clean old EAY MD5 hack from e_os.h.
1839 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
1841 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
1842 memory from it's contents. This is done with a counter that will
1843 place alternating values in each byte. This can be used to solve
1844 two issues: 1) the removal of calls to memset() by highly optimizing
1845 compilers, and 2) cleansing with other values than 0, since those can
1846 be read through on certain media, for example a swap space on disk.
1849 *) Bugfix: client side session caching did not work with external caching,
1850 because the session->cipher setting was not restored when reloading
1851 from the external cache. This problem was masked, when
1852 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
1853 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
1856 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
1857 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
1858 [Zeev Lieber <zeev-l@yahoo.com>]
1860 *) Undo an undocumented change introduced in 0.9.6e which caused
1861 repeated calls to OpenSSL_add_all_ciphers() and
1862 OpenSSL_add_all_digests() to be ignored, even after calling
1866 *) Change the default configuration reader to deal with last line not
1867 being properly terminated.
1870 *) Change X509_NAME_cmp() so it applies the special rules on handling
1871 DN values that are of type PrintableString, as well as RDNs of type
1872 emailAddress where the value has the type ia5String.
1873 [stefank@valicert.com via Richard Levitte]
1875 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
1876 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
1877 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
1878 the bitwise-OR of the two for use by the majority of applications
1879 wanting this behaviour, and update the docs. The documented
1880 behaviour and actual behaviour were inconsistent and had been
1881 changing anyway, so this is more a bug-fix than a behavioural
1883 [Geoff Thorpe, diagnosed by Nadav Har'El]
1885 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
1886 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
1889 *) Fix initialization code race conditions in
1890 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
1891 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
1892 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
1893 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
1894 ssl2_get_cipher_by_char(),
1895 ssl3_get_cipher_by_char().
1896 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
1898 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
1899 the cached sessions are flushed, as the remove_cb() might use ex_data
1900 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
1901 (see [openssl.org #212]).
1902 [Geoff Thorpe, Lutz Jaenicke]
1904 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
1905 length, instead of the encoding length to d2i_ASN1_OBJECT.
1908 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
1910 *) [In 0.9.6g-engine release:]
1911 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
1912 [Lynn Gazis <lgazis@rainbow.com>]
1914 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
1916 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
1917 and get fix the header length calculation.
1918 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
1919 Alon Kantor <alonk@checkpoint.com> (and others),
1922 *) Use proper error handling instead of 'assertions' in buffer
1923 overflow checks added in 0.9.6e. This prevents DoS (the
1924 assertions could call abort()).
1925 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
1927 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
1929 *) Add various sanity checks to asn1_get_length() to reject
1930 the ASN1 length bytes if they exceed sizeof(long), will appear
1931 negative or the content length exceeds the length of the
1933 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
1935 *) Fix cipher selection routines: ciphers without encryption had no flags
1936 for the cipher strength set and where therefore not handled correctly
1937 by the selection routines (PR #130).
1940 *) Fix EVP_dsa_sha macro.
1944 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
1945 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
1946 that was added in OpenSSL 0.9.6d.
1948 As the countermeasure turned out to be incompatible with some
1949 broken SSL implementations, the new option is part of SSL_OP_ALL.
1950 SSL_OP_ALL is usually employed when compatibility with weird SSL
1951 implementations is desired (e.g. '-bugs' option to 's_client' and
1952 's_server'), so the new option is automatically set in many
1956 *) Changes in security patch:
1958 Changes marked "(CHATS)" were sponsored by the Defense Advanced
1959 Research Projects Agency (DARPA) and Air Force Research Laboratory,
1960 Air Force Materiel Command, USAF, under agreement number
1963 *) Add various sanity checks to asn1_get_length() to reject
1964 the ASN1 length bytes if they exceed sizeof(long), will appear
1965 negative or the content length exceeds the length of the
1966 supplied buffer. (CAN-2002-0659)
1967 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
1969 *) Assertions for various potential buffer overflows, not known to
1971 [Ben Laurie (CHATS)]
1973 *) Various temporary buffers to hold ASCII versions of integers were
1974 too small for 64 bit platforms. (CAN-2002-0655)
1975 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
1977 *) Remote buffer overflow in SSL3 protocol - an attacker could
1978 supply an oversized session ID to a client. (CAN-2002-0656)
1979 [Ben Laurie (CHATS)]
1981 *) Remote buffer overflow in SSL2 protocol - an attacker could
1982 supply an oversized client master key. (CAN-2002-0656)
1983 [Ben Laurie (CHATS)]
1985 Changes between 0.9.6c and 0.9.6d [9 May 2002]
1987 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
1988 encoded as NULL) with id-dsa-with-sha1.
1989 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
1991 *) Check various X509_...() return values in apps/req.c.
1992 [Nils Larsch <nla@trustcenter.de>]
1994 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
1995 an end-of-file condition would erronously be flagged, when the CRLF
1996 was just at the end of a processed block. The bug was discovered when
1997 processing data through a buffering memory BIO handing the data to a
1998 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
1999 <ptsekov@syntrex.com> and Nedelcho Stanev.
2002 *) Implement a countermeasure against a vulnerability recently found
2003 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
2004 before application data chunks to avoid the use of known IVs
2005 with data potentially chosen by the attacker.
2008 *) Fix length checks in ssl3_get_client_hello().
2011 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
2012 to prevent ssl3_read_internal() from incorrectly assuming that
2013 ssl3_read_bytes() found application data while handshake
2014 processing was enabled when in fact s->s3->in_read_app_data was
2015 merely automatically cleared during the initial handshake.
2016 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
2018 *) Fix object definitions for Private and Enterprise: they were not
2019 recognized in their shortname (=lowercase) representation. Extend
2020 obj_dat.pl to issue an error when using undefined keywords instead
2021 of silently ignoring the problem (Svenning Sorensen
2022 <sss@sss.dnsalias.net>).
2025 *) Fix DH_generate_parameters() so that it works for 'non-standard'
2026 generators, i.e. generators other than 2 and 5. (Previously, the
2027 code did not properly initialise the 'add' and 'rem' values to
2028 BN_generate_prime().)
2030 In the new general case, we do not insist that 'generator' is
2031 actually a primitive root: This requirement is rather pointless;
2032 a generator of the order-q subgroup is just as good, if not
2036 *) Map new X509 verification errors to alerts. Discovered and submitted by
2037 Tom Wu <tom@arcot.com>.
2040 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
2041 returning non-zero before the data has been completely received
2042 when using non-blocking I/O.
2043 [Bodo Moeller; problem pointed out by John Hughes]
2045 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
2046 [Ben Laurie, Lutz Jaenicke]
2048 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
2049 Yoram Zahavi <YoramZ@gilian.com>).
2052 *) Add information about CygWin 1.3 and on, and preserve proper
2053 configuration for the versions before that.
2054 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
2056 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
2057 check whether we deal with a copy of a session and do not delete from
2058 the cache in this case. Problem reported by "Izhar Shoshani Levi"
2059 <izhar@checkpoint.com>.
2062 *) Do not store session data into the internal session cache, if it
2063 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
2064 flag is set). Proposed by Aslam <aslam@funk.com>.
2067 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
2071 *) [In 0.9.6d-engine release:]
2072 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
2073 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
2075 *) Add the configuration target linux-s390x.
2076 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
2078 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
2079 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
2080 variable as an indication that a ClientHello message has been
2081 received. As the flag value will be lost between multiple
2082 invocations of ssl3_accept when using non-blocking I/O, the
2083 function may not be aware that a handshake has actually taken
2084 place, thus preventing a new session from being added to the
2087 To avoid this problem, we now set s->new_session to 2 instead of
2088 using a local variable.
2089 [Lutz Jaenicke, Bodo Moeller]
2091 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
2092 if the SSL_R_LENGTH_MISMATCH error is detected.
2093 [Geoff Thorpe, Bodo Moeller]
2095 *) New 'shared_ldflag' column in Configure platform table.
2098 *) Fix EVP_CIPHER_mode macro.
2099 ["Dan S. Camper" <dan@bti.net>]
2101 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
2102 type, we must throw them away by setting rr->length to 0.
2103 [D P Chang <dpc@qualys.com>]
2105 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
2107 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
2108 <Dominikus.Scherkl@biodata.com>. (The previous implementation
2109 worked incorrectly for those cases where range = 10..._2 and
2110 3*range is two bits longer than range.)
2113 *) Only add signing time to PKCS7 structures if it is not already
2117 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
2118 OBJ_ld_ce should be OBJ_id_ce.
2119 Also some ip-pda OIDs in crypto/objects/objects.txt were
2120 incorrect (cf. RFC 3039).
2121 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
2123 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
2124 returns early because it has nothing to do.
2125 [Andy Schneider <andy.schneider@bjss.co.uk>]
2127 *) [In 0.9.6c-engine release:]
2128 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
2129 [Andy Schneider <andy.schneider@bjss.co.uk>]
2131 *) [In 0.9.6c-engine release:]
2132 Add support for Cryptographic Appliance's keyserver technology.
2133 (Use engine 'keyclient')
2134 [Cryptographic Appliances and Geoff Thorpe]
2136 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
2137 is called via tools/c89.sh because arguments have to be
2138 rearranged (all '-L' options must appear before the first object
2140 [Richard Shapiro <rshapiro@abinitio.com>]
2142 *) [In 0.9.6c-engine release:]
2143 Add support for Broadcom crypto accelerator cards, backported
2145 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
2147 *) [In 0.9.6c-engine release:]
2148 Add support for SureWare crypto accelerator cards from
2149 Baltimore Technologies. (Use engine 'sureware')
2150 [Baltimore Technologies and Mark Cox]
2152 *) [In 0.9.6c-engine release:]
2153 Add support for crypto accelerator cards from Accelerated
2154 Encryption Processing, www.aep.ie. (Use engine 'aep')
2155 [AEP Inc. and Mark Cox]
2157 *) Add a configuration entry for gcc on UnixWare.
2158 [Gary Benson <gbenson@redhat.com>]
2160 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
2161 messages are stored in a single piece (fixed-length part and
2162 variable-length part combined) and fix various bugs found on the way.
2165 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
2166 instead. BIO_gethostbyname() does not know what timeouts are
2167 appropriate, so entries would stay in cache even when they have
2169 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
2171 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
2172 faced with a pathologically small ClientHello fragment that does
2173 not contain client_version: Instead of aborting with an error,
2174 simply choose the highest available protocol version (i.e.,
2175 TLS 1.0 unless it is disabled). In practice, ClientHello
2176 messages are never sent like this, but this change gives us
2177 strictly correct behaviour at least for TLS.
2180 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
2181 never resets s->method to s->ctx->method when called from within
2182 one of the SSL handshake functions.
2183 [Bodo Moeller; problem pointed out by Niko Baric]
2185 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
2186 (sent using the client's version number) if client_version is
2187 smaller than the protocol version in use. Also change
2188 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
2189 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
2190 the client will at least see that alert.
2193 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
2197 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
2198 client receives HelloRequest while in a handshake.
2199 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
2201 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
2202 should end in 'break', not 'goto end' which circuments various
2203 cleanups done in state SSL_ST_OK. But session related stuff
2204 must be disabled for SSL_ST_OK in the case that we just sent a
2207 Also avoid some overhead by not calling ssl_init_wbio_buffer()
2208 before just sending a HelloRequest.
2209 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
2211 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
2212 reveal whether illegal block cipher padding was found or a MAC
2213 verification error occured. (Neither SSLerr() codes nor alerts
2214 are directly visible to potential attackers, but the information
2215 may leak via logfiles.)
2217 Similar changes are not required for the SSL 2.0 implementation
2218 because the number of padding bytes is sent in clear for SSL 2.0,
2219 and the extra bytes are just ignored. However ssl/s2_pkt.c
2220 failed to verify that the purported number of padding bytes is in
2224 *) Add OpenUNIX-8 support including shared libraries
2225 (Boyd Lynn Gerber <gerberb@zenez.com>).
2228 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
2229 'wristwatch attack' using huge encoding parameters (cf.
2230 James H. Manger's CRYPTO 2001 paper). Note that the
2231 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
2232 encoding parameters and hence was not vulnerable.
2235 *) BN_sqr() bug fix.
2236 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
2238 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
2239 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
2240 followed by modular reduction.
2241 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
2243 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
2244 equivalent based on BN_pseudo_rand() instead of BN_rand().
2247 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
2248 This function was broken, as the check for a new client hello message
2249 to handle SGC did not allow these large messages.
2250 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
2253 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
2256 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
2257 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
2260 *) Rework the configuration and shared library support for Tru64 Unix.
2261 The configuration part makes use of modern compiler features and
2262 still retains old compiler behavior for those that run older versions
2263 of the OS. The shared library support part includes a variant that
2264 uses the RPATH feature, and is available through the special
2265 configuration target "alpha-cc-rpath", which will never be selected
2267 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
2269 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
2270 with the same message size as in ssl3_get_certificate_request().
2271 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
2272 messages might inadvertently be reject as too long.
2273 [Petr Lampa <lampa@fee.vutbr.cz>]
2275 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
2278 *) Modified SSL library such that the verify_callback that has been set
2279 specificly for an SSL object with SSL_set_verify() is actually being
2280 used. Before the change, a verify_callback set with this function was
2281 ignored and the verify_callback() set in the SSL_CTX at the time of
2282 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
2283 to allow the necessary settings.
2286 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
2287 explicitly to NULL, as at least on Solaris 8 this seems not always to be
2288 done automatically (in contradiction to the requirements of the C
2289 standard). This made problems when used from OpenSSH.
2292 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
2293 dh->length and always used
2295 BN_rand_range(priv_key, dh->p).
2297 BN_rand_range() is not necessary for Diffie-Hellman, and this
2298 specific range makes Diffie-Hellman unnecessarily inefficient if
2299 dh->length (recommended exponent length) is much smaller than the
2300 length of dh->p. We could use BN_rand_range() if the order of
2301 the subgroup was stored in the DH structure, but we only have
2306 BN_rand(priv_key, l, ...)
2308 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
2314 RSA_eay_public_encrypt
2315 RSA_eay_private_decrypt
2316 RSA_eay_private_encrypt (signing)
2317 RSA_eay_public_decrypt (signature verification)
2319 (default implementations for RSA_public_encrypt,
2320 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
2321 always reject numbers >= n.
2324 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
2325 to synchronize access to 'locking_thread'. This is necessary on
2326 systems where access to 'locking_thread' (an 'unsigned long'
2327 variable) is not atomic.
2330 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
2331 *before* setting the 'crypto_lock_rand' flag. The previous code had
2332 a race condition if 0 is a valid thread ID.
2333 [Travis Vitek <vitek@roguewave.com>]
2335 *) Add support for shared libraries under Irix.
2336 [Albert Chin-A-Young <china@thewrittenword.com>]
2338 *) Add configuration option to build on Linux on both big-endian and
2340 [Ralf Baechle <ralf@uni-koblenz.de>]
2342 *) Add the possibility to create shared libraries on HP-UX.
2345 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
2347 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
2348 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
2349 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
2350 PRNG state recovery was possible based on the output of
2351 one PRNG request appropriately sized to gain knowledge on
2352 'md' followed by enough consecutive 1-byte PRNG requests
2353 to traverse all of 'state'.
2355 1. When updating 'md_local' (the current thread's copy of 'md')
2356 during PRNG output generation, hash all of the previous
2357 'md_local' value, not just the half used for PRNG output.
2359 2. Make the number of bytes from 'state' included into the hash
2360 independent from the number of PRNG bytes requested.
2362 The first measure alone would be sufficient to avoid
2363 Markku-Juhani's attack. (Actually it had never occurred
2364 to me that the half of 'md_local' used for chaining was the
2365 half from which PRNG output bytes were taken -- I had always
2366 assumed that the secret half would be used.) The second
2367 measure makes sure that additional data from 'state' is never
2368 mixed into 'md_local' in small portions; this heuristically
2369 further strengthens the PRNG.
2372 *) Fix crypto/bn/asm/mips3.s.
2375 *) When only the key is given to "enc", the IV is undefined. Print out
2376 an error message in this case.
2379 *) Handle special case when X509_NAME is empty in X509 printing routines.
2382 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
2383 positive and less than q.
2386 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
2387 used: it isn't thread safe and the add_lock_callback should handle
2389 [Paul Rose <Paul.Rose@bridge.com>]
2391 *) Verify that incoming data obeys the block size in
2392 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
2396 [Ulf Möller, Bodo Möller]
2398 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
2399 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
2400 when fixing the server behaviour for backwards-compatible 'client
2401 hello' messages. (Note that the attack is impractical against
2402 SSL 3.0 and TLS 1.0 anyway because length and version checking
2403 means that the probability of guessing a valid ciphertext is
2404 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
2407 Before 0.9.5, the countermeasure (hide the error by generating a
2408 random 'decryption result') did not work properly because
2409 ERR_clear_error() was missing, meaning that SSL_get_error() would
2410 detect the supposedly ignored error.
2412 Both problems are now fixed.
2415 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
2416 (previously it was 1024).
2419 *) Fix for compatibility mode trust settings: ignore trust settings
2420 unless some valid trust or reject settings are present.
2423 *) Fix for blowfish EVP: its a variable length cipher.
2426 *) Fix various bugs related to DSA S/MIME verification. Handle missing
2427 parameters in DSA public key structures and return an error in the
2428 DSA routines if parameters are absent.
2431 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
2432 in the current directory if neither $RANDFILE nor $HOME was set.
2433 RAND_file_name() in 0.9.6a returned NULL in this case. This has
2434 caused some confusion to Windows users who haven't defined $HOME.
2435 Thus RAND_file_name() is changed again: e_os.h can define a
2436 DEFAULT_HOME, which will be used if $HOME is not set.
2437 For Windows, we use "C:"; on other platforms, we still require
2438 environment variables.
2440 *) Move 'if (!initialized) RAND_poll()' into regions protected by
2441 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
2442 having multiple threads call RAND_poll() concurrently.
2445 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
2446 combination of a flag and a thread ID variable.
2447 Otherwise while one thread is in ssleay_rand_bytes (which sets the
2448 flag), *other* threads can enter ssleay_add_bytes without obeying
2449 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
2450 that they do not hold after the first thread unsets add_do_not_lock).
2453 *) Change bctest again: '-x' expressions are not available in all
2457 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
2459 *) Fix a couple of memory leaks in PKCS7_dataDecode()
2460 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
2462 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
2463 the default extension for executables, if any. Also, make the perl
2464 scripts that use symlink() to test if it really exists and use "cp"
2465 if it doesn't. All this made OpenSSL compilable and installable in
2469 *) Fix for asn1_GetSequence() for indefinite length constructed data.
2470 If SEQUENCE is length is indefinite just set c->slen to the total
2471 amount of data available.
2472 [Steve Henson, reported by shige@FreeBSD.org]
2473 [This change does not apply to 0.9.7.]
2475 *) Change bctest to avoid here-documents inside command substitution
2476 (workaround for FreeBSD /bin/sh bug).
2477 For compatibility with Ultrix, avoid shell functions (introduced
2478 in the bctest version that searches along $PATH).
2481 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
2482 with des_encrypt() defined on some operating systems, like Solaris
2486 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
2487 On the Importance of Eliminating Errors in Cryptographic
2488 Computations, J. Cryptology 14 (2001) 2, 101-119,
2489 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
2492 *) MIPS assembler BIGNUM division bug fix.
2495 *) Disabled incorrect Alpha assembler code.
2498 *) Fix PKCS#7 decode routines so they correctly update the length
2499 after reading an EOC for the EXPLICIT tag.
2501 [This change does not apply to 0.9.7.]
2503 *) Fix bug in PKCS#12 key generation routines. This was triggered
2504 if a 3DES key was generated with a 0 initial byte. Include
2505 PKCS12_BROKEN_KEYGEN compilation option to retain the old
2506 (but broken) behaviour.
2509 *) Enhance bctest to search for a working bc along $PATH and print
2511 [Tim Rice <tim@multitalents.net> via Richard Levitte]
2513 *) Fix memory leaks in err.c: free err_data string if necessary;
2514 don't write to the wrong index in ERR_set_error_data.
2517 *) Implement ssl23_peek (analogous to ssl23_read), which previously
2521 *) Replace rdtsc with _emit statements for VC++ version 5.
2522 [Jeremy Cooper <jeremy@baymoo.org>]
2524 *) Make it possible to reuse SSLv2 sessions.
2527 *) In copy_email() check for >= 0 as a return value for
2528 X509_NAME_get_index_by_NID() since 0 is a valid index.
2529 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
2531 *) Avoid coredump with unsupported or invalid public keys by checking if
2532 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
2533 PKCS7_verify() fails with non detached data.
2536 *) Don't use getenv in library functions when run as setuid/setgid.
2537 New function OPENSSL_issetugid().
2540 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
2541 due to incorrect handling of multi-threading:
2543 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
2545 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
2547 3. Count how many times MemCheck_off() has been called so that
2548 nested use can be treated correctly. This also avoids
2549 inband-signalling in the previous code (which relied on the
2550 assumption that thread ID 0 is impossible).
2553 *) Add "-rand" option also to s_client and s_server.
2556 *) Fix CPU detection on Irix 6.x.
2557 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
2558 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
2560 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
2563 [This change does not apply to 0.9.7.]
2565 *) Use the cached encoding of an X509_NAME structure rather than
2566 copying it. This is apparently the reason for the libsafe "errors"
2567 but the code is actually correct.
2570 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
2571 Bleichenbacher's DSA attack.
2572 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
2573 to be set and top=0 forces the highest bit to be set; top=-1 is new
2574 and leaves the highest bit random.
2575 [Ulf Moeller, Bodo Moeller]
2577 *) In the NCONF_...-based implementations for CONF_... queries
2578 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
2579 a temporary CONF structure with the data component set to NULL
2580 (which gives segmentation faults in lh_retrieve).
2581 Instead, use NULL for the CONF pointer in CONF_get_string and
2582 CONF_get_number (which may use environment variables) and directly
2583 return NULL from CONF_get_section.
2586 *) Fix potential buffer overrun for EBCDIC.
2589 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
2590 keyUsage if basicConstraints absent for a CA.
2593 *) Make SMIME_write_PKCS7() write mail header values with a format that
2594 is more generally accepted (no spaces before the semicolon), since
2595 some programs can't parse those values properly otherwise. Also make
2596 sure BIO's that break lines after each write do not create invalid
2600 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
2601 macros previously used would not encode an empty SEQUENCE OF
2602 and break the signature.
2604 [This change does not apply to 0.9.7.]
2606 *) Zero the premaster secret after deriving the master secret in
2610 *) Add some EVP_add_digest_alias registrations (as found in
2611 OpenSSL_add_all_digests()) to SSL_library_init()
2612 aka OpenSSL_add_ssl_algorithms(). This provides improved
2613 compatibility with peers using X.509 certificates
2614 with unconventional AlgorithmIdentifier OIDs.
2617 *) Fix for Irix with NO_ASM.
2618 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
2620 *) ./config script fixes.
2621 [Ulf Moeller, Richard Levitte]
2623 *) Fix 'openssl passwd -1'.
2626 *) Change PKCS12_key_gen_asc() so it can cope with non null
2627 terminated strings whose length is passed in the passlen
2628 parameter, for example from PEM callbacks. This was done
2629 by adding an extra length parameter to asc2uni().
2630 [Steve Henson, reported by <oddissey@samsung.co.kr>]
2632 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
2633 call failed, free the DSA structure.
2636 *) Fix to uni2asc() to cope with zero length Unicode strings.
2637 These are present in some PKCS#12 files.
2640 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
2641 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
2642 when writing a 32767 byte record.
2643 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
2645 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
2646 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
2648 (RSA objects have a reference count access to which is protected
2649 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
2650 so they are meant to be shared between threads.)
2651 [Bodo Moeller, Geoff Thorpe; original patch submitted by
2652 "Reddie, Steven" <Steven.Reddie@ca.com>]
2654 *) Fix a deadlock in CRYPTO_mem_leaks().
2657 *) Use better test patterns in bntest.
2660 *) rand_win.c fix for Borland C.
2663 *) BN_rshift bugfix for n == 0.
2666 *) Add a 'bctest' script that checks for some known 'bc' bugs
2667 so that 'make test' does not abort just because 'bc' is broken.
2670 *) Store verify_result within SSL_SESSION also for client side to
2671 avoid potential security hole. (Re-used sessions on the client side
2672 always resulted in verify_result==X509_V_OK, not using the original
2673 result of the server certificate verification.)
2676 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
2677 SSL3_RT_APPLICATION_DATA, return 0.
2678 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
2682 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
2683 releases, have been re-implemented by renaming the previous
2684 implementations of ssl2_read and ssl3_read to ssl2_read_internal
2685 and ssl3_read_internal, respectively, and adding 'peek' parameters
2686 to them. The new ssl[23]_{read,peek} functions are calls to
2687 ssl[23]_read_internal with the 'peek' flag set appropriately.
2688 A 'peek' parameter has also been added to ssl3_read_bytes, which
2689 does the actual work for ssl3_read_internal.
2692 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
2693 the method-specific "init()" handler. Also clean up ex_data after
2694 calling the method-specific "finish()" handler. Previously, this was
2695 happening the other way round.
2698 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
2699 The previous value, 12, was not always sufficient for BN_mod_exp().
2702 *) Make sure that shared libraries get the internal name engine with
2703 the full version number and not just 0. This should mark the
2704 shared libraries as not backward compatible. Of course, this should
2705 be changed again when we can guarantee backward binary compatibility.
2708 *) Fix typo in get_cert_by_subject() in by_dir.c
2709 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
2711 *) Rework the system to generate shared libraries:
2713 - Make note of the expected extension for the shared libraries and
2714 if there is a need for symbolic links from for example libcrypto.so.0
2715 to libcrypto.so.0.9.7. There is extended info in Configure for
2718 - Make as few rebuilds of the shared libraries as possible.
2720 - Still avoid linking the OpenSSL programs with the shared libraries.
2722 - When installing, install the shared libraries separately from the
2726 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
2728 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
2729 and not in SSL_clear because the latter is also used by the
2730 accept/connect functions; previously, the settings made by
2731 SSL_set_read_ahead would be lost during the handshake.
2732 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
2734 *) Correct util/mkdef.pl to be selective about disabled algorithms.
2735 Previously, it would create entries for disableed algorithms no
2739 *) Added several new manual pages for SSL_* function.
2742 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
2744 *) In ssl23_get_client_hello, generate an error message when faced
2745 with an initial SSL 3.0/TLS record that is too small to contain the
2746 first two bytes of the ClientHello message, i.e. client_version.
2747 (Note that this is a pathologic case that probably has never happened
2748 in real life.) The previous approach was to use the version number
2749 from the record header as a substitute; but our protocol choice
2750 should not depend on that one because it is not authenticated
2751 by the Finished messages.
2754 *) More robust randomness gathering functions for Windows.
2755 [Jeffrey Altman <jaltman@columbia.edu>]
2757 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
2758 not set then we don't setup the error code for issuer check errors
2759 to avoid possibly overwriting other errors which the callback does
2760 handle. If an application does set the flag then we assume it knows
2761 what it is doing and can handle the new informational codes
2765 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
2766 a general "ANY" type, as such it should be able to decode anything
2767 including tagged types. However it didn't check the class so it would
2768 wrongly interpret tagged types in the same way as their universal
2769 counterpart and unknown types were just rejected. Changed so that the
2770 tagged and unknown types are handled in the same way as a SEQUENCE:
2771 that is the encoding is stored intact. There is also a new type
2772 "V_ASN1_OTHER" which is used when the class is not universal, in this
2773 case we have no idea what the actual type is so we just lump them all
2777 *) On VMS, stdout may very well lead to a file that is written to
2778 in a record-oriented fashion. That means that every write() will
2779 write a separate record, which will be read separately by the
2780 programs trying to read from it. This can be very confusing.
2782 The solution is to put a BIO filter in the way that will buffer
2783 text until a linefeed is reached, and then write everything a
2784 line at a time, so every record written will be an actual line,
2785 not chunks of lines and not (usually doesn't happen, but I've
2786 seen it once) several lines in one record. BIO_f_linebuffer() is
2789 Currently, it's a VMS-only method, because that's where it has
2790 been tested well enough.
2793 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
2794 it can return incorrect results.
2795 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
2796 but it was in 0.9.6-beta[12].)
2799 *) Disable the check for content being present when verifying detached
2800 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
2801 include zero length content when signing messages.
2804 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
2805 BIO_ctrl (for BIO pairs).
2808 *) Add DSO method for VMS.
2811 *) Bug fix: Montgomery multiplication could produce results with the
2815 *) Add RPM specification openssl.spec and modify it to build three
2816 packages. The default package contains applications, application
2817 documentation and run-time libraries. The devel package contains
2818 include files, static libraries and function documentation. The
2819 doc package contains the contents of the doc directory. The original
2820 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
2823 *) Add a large number of documentation files for many SSL routines.
2824 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
2826 *) Add a configuration entry for Sony News 4.
2827 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
2829 *) Don't set the two most significant bits to one when generating a
2830 random number < q in the DSA library.
2833 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
2834 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
2835 the underlying transport is blocking) if a handshake took place.
2836 (The default behaviour is needed by applications such as s_client
2837 and s_server that use select() to determine when to use SSL_read;
2838 but for applications that know in advance when to expect data, it
2839 just makes things more complicated.)
2842 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
2846 *) Add a few more EBCDIC conditionals that make `req' and `x509'
2847 work better on such systems.
2848 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
2850 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
2851 Update PKCS12_parse() so it copies the friendlyName and the
2852 keyid to the certificates aux info.
2855 *) Fix bug in PKCS7_verify() which caused an infinite loop
2856 if there was more than one signature.
2857 [Sven Uszpelkat <su@celocom.de>]
2859 *) Major change in util/mkdef.pl to include extra information
2860 about each symbol, as well as presentig variables as well
2861 as functions. This change means that there's n more need
2862 to rebuild the .num files when some algorithms are excluded.
2865 *) Allow the verify time to be set by an application,
2866 rather than always using the current time.
2869 *) Phase 2 verify code reorganisation. The certificate
2870 verify code now looks up an issuer certificate by a
2871 number of criteria: subject name, authority key id
2872 and key usage. It also verifies self signed certificates
2873 by the same criteria. The main comparison function is
2874 X509_check_issued() which performs these checks.
2876 Lot of changes were necessary in order to support this
2877 without completely rewriting the lookup code.
2879 Authority and subject key identifier are now cached.
2881 The LHASH 'certs' is X509_STORE has now been replaced
2882 by a STACK_OF(X509_OBJECT). This is mainly because an
2883 LHASH can't store or retrieve multiple objects with
2884 the same hash value.
2886 As a result various functions (which were all internal
2887 use only) have changed to handle the new X509_STORE
2888 structure. This will break anything that messed round
2889 with X509_STORE internally.
2891 The functions X509_STORE_add_cert() now checks for an
2892 exact match, rather than just subject name.
2894 The X509_STORE API doesn't directly support the retrieval
2895 of multiple certificates matching a given criteria, however
2896 this can be worked round by performing a lookup first
2897 (which will fill the cache with candidate certificates)
2898 and then examining the cache for matches. This is probably
2899 the best we can do without throwing out X509_LOOKUP
2900 entirely (maybe later...).
2902 The X509_VERIFY_CTX structure has been enhanced considerably.
2904 All certificate lookup operations now go via a get_issuer()
2905 callback. Although this currently uses an X509_STORE it
2906 can be replaced by custom lookups. This is a simple way
2907 to bypass the X509_STORE hackery necessary to make this
2908 work and makes it possible to use more efficient techniques
2909 in future. A very simple version which uses a simple
2910 STACK for its trusted certificate store is also provided
2911 using X509_STORE_CTX_trusted_stack().
2913 The verify_cb() and verify() callbacks now have equivalents
2914 in the X509_STORE_CTX structure.
2916 X509_STORE_CTX also has a 'flags' field which can be used
2917 to customise the verify behaviour.
2920 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
2921 excludes S/MIME capabilities.
2924 *) When a certificate request is read in keep a copy of the
2925 original encoding of the signed data and use it when outputing
2926 again. Signatures then use the original encoding rather than
2927 a decoded, encoded version which may cause problems if the
2928 request is improperly encoded.
2931 *) For consistency with other BIO_puts implementations, call
2932 buffer_write(b, ...) directly in buffer_puts instead of calling
2935 In BIO_puts, increment b->num_write as in BIO_write.
2936 [Peter.Sylvester@EdelWeb.fr]
2938 *) Fix BN_mul_word for the case where the word is 0. (We have to use
2939 BN_zero, we may not return a BIGNUM with an array consisting of
2943 *) Avoid calling abort() from within the library when problems are
2944 detected, except if preprocessor symbols have been defined
2945 (such as REF_CHECK, BN_DEBUG etc.).
2948 *) New openssl application 'rsautl'. This utility can be
2949 used for low level RSA operations. DER public key
2950 BIO/fp routines also added.
2953 *) New Configure entry and patches for compiling on QNX 4.
2954 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
2956 *) A demo state-machine implementation was sponsored by
2957 Nuron (http://www.nuron.com/) and is now available in
2958 demos/state_machine.
2961 *) New options added to the 'dgst' utility for signature
2962 generation and verification.
2965 *) Unrecognized PKCS#7 content types are now handled via a
2966 catch all ASN1_TYPE structure. This allows unsupported
2967 types to be stored as a "blob" and an application can
2968 encode and decode it manually.
2971 *) Fix various signed/unsigned issues to make a_strex.c
2973 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
2975 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
2976 length if passed a buffer. ASN1_INTEGER_to_BN failed
2977 if passed a NULL BN and its argument was negative.
2978 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
2980 *) Modification to PKCS#7 encoding routines to output definite
2981 length encoding. Since currently the whole structures are in
2982 memory there's not real point in using indefinite length
2983 constructed encoding. However if OpenSSL is compiled with
2984 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
2987 *) Added BIO_vprintf() and BIO_vsnprintf().
2990 *) Added more prefixes to parse for in the the strings written
2991 through a logging bio, to cover all the levels that are available
2992 through syslog. The prefixes are now:
2994 PANIC, EMERG, EMR => LOG_EMERG
2995 ALERT, ALR => LOG_ALERT
2996 CRIT, CRI => LOG_CRIT
2997 ERROR, ERR => LOG_ERR
2998 WARNING, WARN, WAR => LOG_WARNING
2999 NOTICE, NOTE, NOT => LOG_NOTICE
3000 INFO, INF => LOG_INFO
3001 DEBUG, DBG => LOG_DEBUG
3003 and as before, if none of those prefixes are present at the
3004 beginning of the string, LOG_ERR is chosen.
3006 On Win32, the LOG_* levels are mapped according to this:
3008 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
3009 LOG_WARNING => EVENTLOG_WARNING_TYPE
3010 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
3014 *) Made it possible to reconfigure with just the configuration
3015 argument "reconf" or "reconfigure". The command line arguments
3016 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
3017 and are retrieved from there when reconfiguring.
3021 [Assar Westerlund <assar@sics.se>, Richard Levitte]
3023 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
3026 *) The obj_dat.pl script was messing up the sorting of object
3027 names. The reason was that it compared the quoted version
3028 of strings as a result "OCSP" > "OCSP Signing" because
3029 " > SPACE. Changed script to store unquoted versions of
3030 names and add quotes on output. It was also omitting some
3031 names from the lookup table if they were given a default
3032 value (that is if SN is missing it is given the same
3033 value as LN and vice versa), these are now added on the
3034 grounds that if an object has a name we should be able to
3035 look it up. Finally added warning output when duplicate
3036 short or long names are found.
3039 *) Changes needed for Tandem NSK.
3040 [Scott Uroff <scott@xypro.com>]
3042 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
3043 RSA_padding_check_SSLv23(), special padding was never detected
3044 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
3045 version rollback attacks was not effective.
3047 In s23_clnt.c, don't use special rollback-attack detection padding
3048 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
3049 client; similarly, in s23_srvr.c, don't do the rollback check if
3050 SSL 2.0 is the only protocol enabled in the server.
3053 *) Make it possible to get hexdumps of unprintable data with 'openssl
3054 asn1parse'. By implication, the functions ASN1_parse_dump() and
3055 BIO_dump_indent() are added.
3058 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
3059 these print out strings and name structures based on various
3060 flags including RFC2253 support and proper handling of
3061 multibyte characters. Added options to the 'x509' utility
3062 to allow the various flags to be set.
3065 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
3066 Also change the functions X509_cmp_current_time() and
3067 X509_gmtime_adj() work with an ASN1_TIME structure,
3068 this will enable certificates using GeneralizedTime in validity
3069 dates to be checked.
3072 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
3073 negative public key encodings) on by default,
3074 NO_NEG_PUBKEY_BUG can be set to disable it.
3077 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
3078 content octets. An i2c_ASN1_OBJECT is unnecessary because
3079 the encoding can be trivially obtained from the structure.
3082 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
3083 not read locks (CRYPTO_r_[un]lock).
3086 *) A first attempt at creating official support for shared
3087 libraries through configuration. I've kept it so the
3088 default is static libraries only, and the OpenSSL programs
3089 are always statically linked for now, but there are
3090 preparations for dynamic linking in place.
3091 This has been tested on Linux and Tru64.
3094 *) Randomness polling function for Win9x, as described in:
3095 Peter Gutmann, Software Generation of Practically Strong
3099 *) Fix so PRNG is seeded in req if using an already existing
3103 *) New options to smime application. -inform and -outform
3104 allow alternative formats for the S/MIME message including
3105 PEM and DER. The -content option allows the content to be
3106 specified separately. This should allow things like Netscape
3107 form signing output easier to verify.
3110 *) Fix the ASN1 encoding of tags using the 'long form'.
3113 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
3114 STRING types. These convert content octets to and from the
3115 underlying type. The actual tag and length octets are
3116 already assumed to have been read in and checked. These
3117 are needed because all other string types have virtually
3118 identical handling apart from the tag. By having versions
3119 of the ASN1 functions that just operate on content octets
3120 IMPLICIT tagging can be handled properly. It also allows
3121 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
3122 and ASN1_INTEGER are identical apart from the tag.
3125 *) Change the handling of OID objects as follows:
3127 - New object identifiers are inserted in objects.txt, following
3128 the syntax given in objects.README.
3129 - objects.pl is used to process obj_mac.num and create a new
3131 - obj_dat.pl is used to create a new obj_dat.h, using the data in
3134 This is currently kind of a hack, and the perl code in objects.pl
3135 isn't very elegant, but it works as I intended. The simplest way
3136 to check that it worked correctly is to look in obj_dat.h and
3137 check the array nid_objs and make sure the objects haven't moved
3138 around (this is important!). Additions are OK, as well as
3139 consistent name changes.
3142 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
3145 *) Addition of the command line parameter '-rand file' to 'openssl req'.
3146 The given file adds to whatever has already been seeded into the
3147 random pool through the RANDFILE configuration file option or
3148 environment variable, or the default random state file.
3151 *) mkstack.pl now sorts each macro group into lexical order.
3152 Previously the output order depended on the order the files
3153 appeared in the directory, resulting in needless rewriting
3157 *) Patches to make OpenSSL compile under Win32 again. Mostly
3158 work arounds for the VC++ problem that it treats func() as
3159 func(void). Also stripped out the parts of mkdef.pl that
3160 added extra typesafe functions: these no longer exist.
3163 *) Reorganisation of the stack code. The macros are now all
3164 collected in safestack.h . Each macro is defined in terms of
3165 a "stack macro" of the form SKM_<name>(type, a, b). The
3166 DEBUG_SAFESTACK is now handled in terms of function casts,
3167 this has the advantage of retaining type safety without the
3168 use of additional functions. If DEBUG_SAFESTACK is not defined
3169 then the non typesafe macros are used instead. Also modified the
3170 mkstack.pl script to handle the new form. Needs testing to see
3171 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
3172 the default if no major problems. Similar behaviour for ASN1_SET_OF
3173 and PKCS12_STACK_OF.
3176 *) When some versions of IIS use the 'NET' form of private key the
3177 key derivation algorithm is different. Normally MD5(password) is
3178 used as a 128 bit RC4 key. In the modified case
3179 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
3180 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
3181 as the old Netscape_RSA functions except they have an additional
3182 'sgckey' parameter which uses the modified algorithm. Also added
3183 an -sgckey command line option to the rsa utility. Thanks to
3184 Adrian Peck <bertie@ncipher.com> for posting details of the modified
3185 algorithm to openssl-dev.
3188 *) The evp_local.h macros were using 'c.##kname' which resulted in
3189 invalid expansion on some systems (SCO 5.0.5 for example).
3190 Corrected to 'c.kname'.
3191 [Phillip Porch <root@theporch.com>]
3193 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
3194 a STACK of email addresses from a certificate or request, these look
3195 in the subject name and the subject alternative name extensions and
3196 omit any duplicate addresses.
3199 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
3200 This makes DSA verification about 2 % faster.
3203 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
3204 (meaning that now 2^5 values will be precomputed, which is only 4 KB
3205 plus overhead for 1024 bit moduli).
3206 This makes exponentiations about 0.5 % faster for 1024 bit
3207 exponents (as measured by "openssl speed rsa2048").
3210 *) Rename memory handling macros to avoid conflicts with other
3212 Malloc => OPENSSL_malloc
3213 Malloc_locked => OPENSSL_malloc_locked
3214 Realloc => OPENSSL_realloc
3215 Free => OPENSSL_free
3218 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
3219 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
3222 *) CygWin32 support.
3223 [John Jarvie <jjarvie@newsguy.com>]
3225 *) The type-safe stack code has been rejigged. It is now only compiled
3226 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
3227 by default all type-specific stack functions are "#define"d back to
3228 standard stack functions. This results in more streamlined output
3229 but retains the type-safety checking possibilities of the original
3233 *) The STACK code has been cleaned up, and certain type declarations
3234 that didn't make a lot of sense have been brought in line. This has
3235 also involved a cleanup of sorts in safestack.h to more correctly
3236 map type-safe stack functions onto their plain stack counterparts.
3237 This work has also resulted in a variety of "const"ifications of
3238 lots of the code, especially "_cmp" operations which should normally
3239 be prototyped with "const" parameters anyway.
3242 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
3243 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
3244 (The PRNG state consists of two parts, the large pool 'state' and 'md',
3245 where all of 'md' is used each time the PRNG is used, but 'state'
3246 is used only indexed by a cyclic counter. As entropy may not be
3247 well distributed from the beginning, 'md' is important as a
3248 chaining variable. However, the output function chains only half
3249 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
3250 all of 'md', and seeding with STATE_SIZE dummy bytes will result
3251 in all of 'state' being rewritten, with the new values depending
3252 on virtually all of 'md'. This overcomes the 80 bit limitation.)
3255 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
3256 the handshake is continued after ssl_verify_cert_chain();
3257 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
3258 can lead to 'unexplainable' connection aborts later.
3259 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
3261 *) Major EVP API cipher revision.
3262 Add hooks for extra EVP features. This allows various cipher
3263 parameters to be set in the EVP interface. Support added for variable
3264 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
3265 setting of RC2 and RC5 parameters.
3267 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
3270 Remove lots of duplicated code from the EVP library. For example *every*
3271 cipher init() function handles the 'iv' in the same way according to the
3272 cipher mode. They also all do nothing if the 'key' parameter is NULL and
3273 for CFB and OFB modes they zero ctx->num.
3275 New functionality allows removal of S/MIME code RC2 hack.
3277 Most of the routines have the same form and so can be declared in terms
3280 By shifting this to the top level EVP_CipherInit() it can be removed from
3281 all individual ciphers. If the cipher wants to handle IVs or keys
3282 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
3285 Change lots of functions like EVP_EncryptUpdate() to now return a
3286 value: although software versions of the algorithms cannot fail
3287 any installed hardware versions can.
3290 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
3291 this option is set, tolerate broken clients that send the negotiated
3292 protocol version number instead of the requested protocol version
3296 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
3297 i.e. non-zero for export ciphersuites, zero otherwise.
3298 Previous versions had this flag inverted, inconsistent with
3299 rsa_tmp_cb (..._TMP_RSA_CB).
3300 [Bodo Moeller; problem reported by Amit Chopra]
3302 *) Add missing DSA library text string. Work around for some IIS
3303 key files with invalid SEQUENCE encoding.
3306 *) Add a document (doc/standards.txt) that list all kinds of standards
3307 and so on that are implemented in OpenSSL.
3310 *) Enhance c_rehash script. Old version would mishandle certificates
3311 with the same subject name hash and wouldn't handle CRLs at all.
3312 Added -fingerprint option to crl utility, to support new c_rehash
3316 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
3319 *) Fix for SSL server purpose checking. Server checking was
3320 rejecting certificates which had extended key usage present
3321 but no ssl client purpose.
3322 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
3324 *) Make PKCS#12 code work with no password. The PKCS#12 spec
3325 is a little unclear about how a blank password is handled.
3326 Since the password in encoded as a BMPString with terminating
3327 double NULL a zero length password would end up as just the
3328 double NULL. However no password at all is different and is
3329 handled differently in the PKCS#12 key generation code. NS
3330 treats a blank password as zero length. MSIE treats it as no
3331 password on export: but it will try both on import. We now do
3332 the same: PKCS12_parse() tries zero length and no password if
3333 the password is set to "" or NULL (NULL is now a valid password:
3334 it wasn't before) as does the pkcs12 application.
3337 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
3338 perror when PEM_read_bio_X509_REQ fails, the error message must
3339 be obtained from the error queue.
3342 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
3343 it in ERR_remove_state if appropriate, and change ERR_get_state
3344 accordingly to avoid race conditions (this is necessary because
3345 thread_hash is no longer constant once set).
3348 *) Bugfix for linux-elf makefile.one.
3351 *) RSA_get_default_method() will now cause a default
3352 RSA_METHOD to be chosen if one doesn't exist already.
3353 Previously this was only set during a call to RSA_new()
3354 or RSA_new_method(NULL) meaning it was possible for
3355 RSA_get_default_method() to return NULL.
3358 *) Added native name translation to the existing DSO code
3359 that will convert (if the flag to do so is set) filenames
3360 that are sufficiently small and have no path information
3361 into a canonical native form. Eg. "blah" converted to
3362 "libblah.so" or "blah.dll" etc.
3365 *) New function ERR_error_string_n(e, buf, len) which is like
3366 ERR_error_string(e, buf), but writes at most 'len' bytes
3367 including the 0 terminator. For ERR_error_string_n, 'buf'
3369 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
3371 *) CONF library reworked to become more general. A new CONF
3372 configuration file reader "class" is implemented as well as a
3373 new functions (NCONF_*, for "New CONF") to handle it. The now
3374 old CONF_* functions are still there, but are reimplemented to
3375 work in terms of the new functions. Also, a set of functions
3376 to handle the internal storage of the configuration data is
3377 provided to make it easier to write new configuration file
3378 reader "classes" (I can definitely see something reading a
3379 configuration file in XML format, for example), called _CONF_*,
3380 or "the configuration storage API"...
3382 The new configuration file reading functions are:
3384 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
3385 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
3387 NCONF_default, NCONF_WIN32
3389 NCONF_dump_fp, NCONF_dump_bio
3391 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
3392 NCONF_new creates a new CONF object. This works in the same way
3393 as other interfaces in OpenSSL, like the BIO interface.
3394 NCONF_dump_* dump the internal storage of the configuration file,
3395 which is useful for debugging. All other functions take the same
3396 arguments as the old CONF_* functions wth the exception of the
3397 first that must be a `CONF *' instead of a `LHASH *'.
3399 To make it easer to use the new classes with the old CONF_* functions,
3400 the function CONF_set_default_method is provided.
3403 *) Add '-tls1' option to 'openssl ciphers', which was already
3404 mentioned in the documentation but had not been implemented.
3405 (This option is not yet really useful because even the additional
3406 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
3409 *) Initial DSO code added into libcrypto for letting OpenSSL (and
3410 OpenSSL-based applications) load shared libraries and bind to
3411 them in a portable way.
3412 [Geoff Thorpe, with contributions from Richard Levitte]
3414 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
3416 *) Make sure _lrotl and _lrotr are only used with MSVC.
3418 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
3419 (the default implementation of RAND_status).
3421 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
3422 to '-clrext' (= clear extensions), as intended and documented.
3423 [Bodo Moeller; inconsistency pointed out by Michael Attili
3426 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
3427 was larger than the MD block size.
3428 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
3430 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
3431 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
3432 using the passed key: if the passed key was a private key the result
3433 of X509_print(), for example, would be to print out all the private key
3437 *) des_quad_cksum() byte order bug fix.
3438 [Ulf Möller, using the problem description in krb4-0.9.7, where
3439 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
3441 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
3443 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
3445 *) For easily testing in shell scripts whether some command
3446 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
3447 returns with exit code 0 iff no command of the given name is available.
3448 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
3449 the output goes to stdout and nothing is printed to stderr.
3450 Additional arguments are always ignored.
3452 Since for each cipher there is a command of the same name,
3453 the 'no-cipher' compilation switches can be tested this way.
3455 ('openssl no-XXX' is not able to detect pseudo-commands such
3456 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
3459 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
3462 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
3463 is set; it will be thrown away anyway because each handshake creates
3465 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
3466 to parameters -- in previous versions (since OpenSSL 0.9.3) the
3467 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
3468 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
3471 *) New s_client option -ign_eof: EOF at stdin is ignored, and
3472 'Q' and 'R' lose their special meanings (quit/renegotiate).
3473 This is part of what -quiet does; unlike -quiet, -ign_eof
3474 does not suppress any output.
3477 *) Add compatibility options to the purpose and trust code. The
3478 purpose X509_PURPOSE_ANY is "any purpose" which automatically
3479 accepts a certificate or CA, this was the previous behaviour,
3480 with all the associated security issues.
3482 X509_TRUST_COMPAT is the old trust behaviour: only and
3483 automatically trust self signed roots in certificate store. A
3484 new trust setting X509_TRUST_DEFAULT is used to specify that
3485 a purpose has no associated trust setting and it should instead
3486 use the value in the default purpose.
3489 *) Fix the PKCS#8 DSA private key code so it decodes keys again
3490 and fix a memory leak.
3493 *) In util/mkerr.pl (which implements 'make errors'), preserve
3494 reason strings from the previous version of the .c file, as
3495 the default to have only downcase letters (and digits) in
3496 automatically generated reasons codes is not always appropriate.
3499 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
3500 using strerror. Previously, ERR_reason_error_string() returned
3501 library names as reason strings for SYSerr; but SYSerr is a special
3502 case where small numbers are errno values, not library numbers.
3505 *) Add '-dsaparam' option to 'openssl dhparam' application. This
3506 converts DSA parameters into DH parameters. (When creating parameters,
3507 DSA_generate_parameters is used.)
3510 *) Include 'length' (recommended exponent length) in C code generated
3511 by 'openssl dhparam -C'.
3514 *) The second argument to set_label in perlasm was already being used
3515 so couldn't be used as a "file scope" flag. Moved to third argument
3519 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
3520 instead of RAND_bytes for encryption IVs and salts.
3523 *) Include RAND_status() into RAND_METHOD instead of implementing
3524 it only for md_rand.c Otherwise replacing the PRNG by calling
3525 RAND_set_rand_method would be impossible.
3528 *) Don't let DSA_generate_key() enter an infinite loop if the random
3529 number generation fails.
3532 *) New 'rand' application for creating pseudo-random output.
3535 *) Added configuration support for Linux/IA64
3536 [Rolf Haberrecker <rolf@suse.de>]
3538 *) Assembler module support for Mingw32.
3541 *) Shared library support for HPUX (in shlib/).
3542 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
3544 *) Shared library support for Solaris gcc.
3545 [Lutz Behnke <behnke@trustcenter.de>]
3547 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
3549 *) PKCS7_encrypt() was adding text MIME headers twice because they
3550 were added manually and by SMIME_crlf_copy().
3553 *) In bntest.c don't call BN_rand with zero bits argument.
3554 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
3556 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
3557 case was implemented. This caused BN_div_recp() to fail occasionally.
3560 *) Add an optional second argument to the set_label() in the perl
3561 assembly language builder. If this argument exists and is set
3562 to 1 it signals that the assembler should use a symbol whose
3563 scope is the entire file, not just the current function. This
3564 is needed with MASM which uses the format label:: for this scope.
3565 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
3567 *) Change the ASN1 types so they are typedefs by default. Before
3568 almost all types were #define'd to ASN1_STRING which was causing
3569 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
3573 *) Change names of new functions to the new get1/get0 naming
3574 convention: After 'get1', the caller owns a reference count
3575 and has to call ..._free; 'get0' returns a pointer to some
3576 data structure without incrementing reference counters.
3577 (Some of the existing 'get' functions increment a reference
3578 counter, some don't.)
3579 Similarly, 'set1' and 'add1' functions increase reference
3580 counters or duplicate objects.
3583 *) Allow for the possibility of temp RSA key generation failure:
3584 the code used to assume it always worked and crashed on failure.
3587 *) Fix potential buffer overrun problem in BIO_printf().
3588 [Ulf Möller, using public domain code by Patrick Powell; problem
3589 pointed out by David Sacerdote <das33@cornell.edu>]
3591 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
3592 RAND_egd() and RAND_status(). In the command line application,
3593 the EGD socket can be specified like a seed file using RANDFILE
3597 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
3598 Some CAs (e.g. Verisign) distribute certificates in this form.
3601 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
3602 list to exclude them. This means that no special compilation option
3603 is needed to use anonymous DH: it just needs to be included in the
3607 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
3608 EVP_MD_type. The old functionality is available in a new macro called
3609 EVP_MD_md(). Change code that uses it and update docs.
3612 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
3613 where the 'void *' argument is replaced by a function pointer argument.
3614 Previously 'void *' was abused to point to functions, which works on
3615 many platforms, but is not correct. As these functions are usually
3616 called by macros defined in OpenSSL header files, most source code
3617 should work without changes.
3620 *) <openssl/opensslconf.h> (which is created by Configure) now contains
3621 sections with information on -D... compiler switches used for
3622 compiling the library so that applications can see them. To enable
3623 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
3624 must be defined. E.g.,
3625 #define OPENSSL_ALGORITHM_DEFINES
3626 #include <openssl/opensslconf.h>
3627 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
3628 [Richard Levitte, Ulf and Bodo Möller]
3630 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
3634 *) Change the 'other' type in certificate aux info to a STACK_OF
3635 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
3636 the required ASN1 format: arbitrary types determined by an OID.
3639 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
3640 argument to 'req'. This is not because the function is newer or
3641 better than others it just uses the work 'NEW' in the certificate
3642 request header lines. Some software needs this.
3645 *) Reorganise password command line arguments: now passwords can be
3646 obtained from various sources. Delete the PEM_cb function and make
3647 it the default behaviour: i.e. if the callback is NULL and the
3648 usrdata argument is not NULL interpret it as a null terminated pass
3649 phrase. If usrdata and the callback are NULL then the pass phrase
3650 is prompted for as usual.
3653 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
3654 the support is automatically enabled. The resulting binaries will
3655 autodetect the card and use it if present.
3656 [Ben Laurie and Compaq Inc.]
3658 *) Work around for Netscape hang bug. This sends certificate request
3659 and server done in one record. Since this is perfectly legal in the
3660 SSL/TLS protocol it isn't a "bug" option and is on by default. See
3661 the bugs/SSLv3 entry for more info.
3664 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
3667 *) Add -rand argument to smime and pkcs12 applications and read/write
3671 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
3674 *) Add command line password options to the remaining applications.
3677 *) Bug fix for BN_div_recp() for numerators with an even number of
3681 *) More tests in bntest.c, and changed test_bn output.
3684 *) ./config recognizes MacOS X now.
3687 *) Bug fix for BN_div() when the first words of num and divsor are
3688 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
3691 *) Add support for various broken PKCS#8 formats, and command line
3692 options to produce them.
3695 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
3696 get temporary BIGNUMs from a BN_CTX.
3699 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
3703 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
3704 include a #define from the old name to the new. The original intent
3705 was that statically linked binaries could for example just call
3706 SSLeay_add_all_ciphers() to just add ciphers to the table and not
3707 link with digests. This never worked becayse SSLeay_add_all_digests()
3708 and SSLeay_add_all_ciphers() were in the same source file so calling
3709 one would link with the other. They are now in separate source files.
3712 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
3715 *) Use a less unusual form of the Miller-Rabin primality test (it used
3716 a binary algorithm for exponentiation integrated into the Miller-Rabin
3717 loop, our standard modexp algorithms are faster).
3720 *) Support for the EBCDIC character set completed.
3721 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
3723 *) Source code cleanups: use const where appropriate, eliminate casts,
3724 use void * instead of char * in lhash.
3727 *) Bugfix: ssl3_send_server_key_exchange was not restartable
3728 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
3729 this the server could overwrite ephemeral keys that the client
3733 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
3734 using 50 iterations of the Rabin-Miller test.
3736 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
3737 iterations of the Rabin-Miller test as required by the appendix
3738 to FIPS PUB 186[-1]) instead of DSA_is_prime.
3739 As BN_is_prime_fasttest includes trial division, DSA parameter
3740 generation becomes much faster.
3742 This implies a change for the callback functions in DSA_is_prime
3743 and DSA_generate_parameters: The callback function is called once
3744 for each positive witness in the Rabin-Miller test, not just
3745 occasionally in the inner loop; and the parameters to the
3746 callback function now provide an iteration count for the outer
3747 loop rather than for the current invocation of the inner loop.
3748 DSA_generate_parameters additionally can call the callback
3749 function with an 'iteration count' of -1, meaning that a
3750 candidate has passed the trial division test (when q is generated
3751 from an application-provided seed, trial division is skipped).
3754 *) New function BN_is_prime_fasttest that optionally does trial
3755 division before starting the Rabin-Miller test and has
3756 an additional BN_CTX * argument (whereas BN_is_prime always
3757 has to allocate at least one BN_CTX).
3758 'callback(1, -1, cb_arg)' is called when a number has passed the
3759 trial division stage.
3762 *) Fix for bug in CRL encoding. The validity dates weren't being handled
3766 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
3769 *) New function BN_pseudo_rand().
3772 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
3773 bignum version of BN_from_montgomery() with the working code from
3774 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
3778 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
3779 made it impossible to use the same SSL_SESSION data structure in
3780 SSL2 clients in multiple threads.
3783 *) The return value of RAND_load_file() no longer counts bytes obtained
3784 by stat(). RAND_load_file(..., -1) is new and uses the complete file
3785 to seed the PRNG (previously an explicit byte count was required).
3786 [Ulf Möller, Bodo Möller]
3788 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
3789 used (char *) instead of (void *) and had casts all over the place.
3792 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
3795 *) Retain source code compatibility for BN_prime_checks macro:
3796 BN_is_prime(..., BN_prime_checks, ...) now uses
3797 BN_prime_checks_for_size to determine the appropriate number of
3798 Rabin-Miller iterations.
3801 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
3802 DH_CHECK_P_NOT_SAFE_PRIME.
3803 (Check if this is true? OpenPGP calls them "strong".)
3806 *) Merge the functionality of "dh" and "gendh" programs into a new program
3807 "dhparam". The old programs are retained for now but will handle DH keys
3808 (instead of parameters) in future.
3811 *) Make the ciphers, s_server and s_client programs check the return values
3812 when a new cipher list is set.
3815 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
3816 ciphers. Before when the 56bit ciphers were enabled the sorting was
3819 The syntax for the cipher sorting has been extended to support sorting by
3820 cipher-strength (using the strength_bits hard coded in the tables).
3821 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
3823 Fix a bug in the cipher-command parser: when supplying a cipher command
3824 string with an "undefined" symbol (neither command nor alphanumeric
3825 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
3826 an error is flagged.
3828 Due to the strength-sorting extension, the code of the
3829 ssl_create_cipher_list() function was completely rearranged. I hope that
3830 the readability was also increased :-)
3831 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
3833 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
3834 for the first serial number and places 2 in the serial number file. This
3835 avoids problems when the root CA is created with serial number zero and
3836 the first user certificate has the same issuer name and serial number
3840 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
3841 the new code. Add documentation for this stuff.
3844 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
3845 X509_*() to X509at_*() on the grounds that they don't handle X509
3846 structures and behave in an analagous way to the X509v3 functions:
3847 they shouldn't be called directly but wrapper functions should be used
3850 So we also now have some wrapper functions that call the X509at functions
3851 when passed certificate requests. (TO DO: similar things can be done with
3852 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
3853 things. Some of these need some d2i or i2d and print functionality
3854 because they handle more complex structures.)
3857 *) Add missing #ifndefs that caused missing symbols when building libssl
3858 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
3859 NO_RSA in ssl/s2*.c.
3860 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
3862 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
3863 has a return value which indicates the quality of the random data
3864 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
3865 error queue. New function RAND_pseudo_bytes() generates output that is
3866 guaranteed to be unique but not unpredictable. RAND_add is like
3867 RAND_seed, but takes an extra argument for an entropy estimate
3868 (RAND_seed always assumes full entropy).
3871 *) Do more iterations of Rabin-Miller probable prime test (specifically,
3872 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
3873 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
3874 in crypto/bn/bn_prime.c for the complete table). This guarantees a
3875 false-positive rate of at most 2^-80 for random input.
3878 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
3881 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
3882 in the 0.9.5 release), this returns the chain
3883 from an X509_CTX structure with a dup of the stack and all
3884 the X509 reference counts upped: so the stack will exist
3885 after X509_CTX_cleanup() has been called. Modify pkcs12.c
3888 Also make SSL_SESSION_print() print out the verify return
3892 *) Add manpage for the pkcs12 command. Also change the default
3893 behaviour so MAC iteration counts are used unless the new
3894 -nomaciter option is used. This improves file security and
3895 only older versions of MSIE (4.0 for example) need it.
3898 *) Honor the no-xxx Configure options when creating .DEF files.
3901 *) Add PKCS#10 attributes to field table: challengePassword,
3902 unstructuredName and unstructuredAddress. These are taken from
3903 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
3904 international characters are used.
3906 More changes to X509_ATTRIBUTE code: allow the setting of types
3907 based on strings. Remove the 'loc' parameter when adding
3908 attributes because these will be a SET OF encoding which is sorted
3912 *) Initial changes to the 'req' utility to allow request generation
3913 automation. This will allow an application to just generate a template
3914 file containing all the field values and have req construct the
3917 Initial support for X509_ATTRIBUTE handling. Stacks of these are
3918 used all over the place including certificate requests and PKCS#7
3919 structures. They are currently handled manually where necessary with
3920 some primitive wrappers for PKCS#7. The new functions behave in a
3921 manner analogous to the X509 extension functions: they allow
3922 attributes to be looked up by NID and added.
3924 Later something similar to the X509V3 code would be desirable to
3925 automatically handle the encoding, decoding and printing of the
3926 more complex types. The string types like challengePassword can
3927 be handled by the string table functions.
3929 Also modified the multi byte string table handling. Now there is
3930 a 'global mask' which masks out certain types. The table itself
3931 can use the flag STABLE_NO_MASK to ignore the mask setting: this
3932 is useful when for example there is only one permissible type
3933 (as in countryName) and using the mask might result in no valid
3937 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
3938 SSL_get_peer_finished to allow applications to obtain the latest
3939 Finished messages sent to the peer or expected from the peer,
3940 respectively. (SSL_get_peer_finished is usually the Finished message
3941 actually received from the peer, otherwise the protocol will be aborted.)
3943 As the Finished message are message digests of the complete handshake
3944 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
3945 be used for external authentication procedures when the authentication
3946 provided by SSL/TLS is not desired or is not enough.
3949 *) Enhanced support for Alpha Linux is added. Now ./config checks if
3950 the host supports BWX extension and if Compaq C is present on the
3951 $PATH. Just exploiting of the BWX extension results in 20-30%
3952 performance kick for some algorithms, e.g. DES and RC4 to mention
3953 a couple. Compaq C in turn generates ~20% faster code for MD5 and
3957 *) Add support for MS "fast SGC". This is arguably a violation of the
3958 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
3959 weak crypto and after checking the certificate is SGC a second one
3960 with strong crypto. MS SGC stops the first handshake after receiving
3961 the server certificate message and sends a second client hello. Since
3962 a server will typically do all the time consuming operations before
3963 expecting any further messages from the client (server key exchange
3964 is the most expensive) there is little difference between the two.
3966 To get OpenSSL to support MS SGC we have to permit a second client
3967 hello message after we have sent server done. In addition we have to
3968 reset the MAC if we do get this second client hello.
3971 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
3972 if a DER encoded private key is RSA or DSA traditional format. Changed
3973 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
3974 format DER encoded private key. Newer code should use PKCS#8 format which
3975 has the key type encoded in the ASN1 structure. Added DER private key
3976 support to pkcs8 application.
3979 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
3980 ciphersuites has been selected (as required by the SSL 3/TLS 1
3981 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
3982 is set, we interpret this as a request to violate the specification
3983 (the worst that can happen is a handshake failure, and 'correct'
3984 behaviour would result in a handshake failure anyway).
3987 *) In SSL_CTX_add_session, take into account that there might be multiple
3988 SSL_SESSION structures with the same session ID (e.g. when two threads
3989 concurrently obtain them from an external cache).
3990 The internal cache can handle only one SSL_SESSION with a given ID,
3991 so if there's a conflict, we now throw out the old one to achieve
3995 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
3996 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
3997 some routines that use cipher OIDs: some ciphers do not have OIDs
3998 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
4002 *) Simplify the trust setting structure and code. Now we just have
4003 two sequences of OIDs for trusted and rejected settings. These will
4004 typically have values the same as the extended key usage extension
4005 and any application specific purposes.
4007 The trust checking code now has a default behaviour: it will just
4008 check for an object with the same NID as the passed id. Functions can
4009 be provided to override either the default behaviour or the behaviour
4010 for a given id. SSL client, server and email already have functions
4011 in place for compatibility: they check the NID and also return "trusted"
4012 if the certificate is self signed.
4015 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
4016 traditional format into an EVP_PKEY structure.
4019 *) Add a password callback function PEM_cb() which either prompts for
4020 a password if usr_data is NULL or otherwise assumes it is a null
4021 terminated password. Allow passwords to be passed on command line
4022 environment or config files in a few more utilities.
4025 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
4026 keys. Add some short names for PKCS#8 PBE algorithms and allow them
4027 to be specified on the command line for the pkcs8 and pkcs12 utilities.
4028 Update documentation.
4031 *) Support for ASN1 "NULL" type. This could be handled before by using
4032 ASN1_TYPE but there wasn't any function that would try to read a NULL
4033 and produce an error if it couldn't. For compatibility we also have
4034 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
4035 don't allocate anything because they don't need to.
4038 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
4040 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
4042 *) Rebuild of the memory allocation routines used by OpenSSL code and
4043 possibly others as well. The purpose is to make an interface that
4044 provide hooks so anyone can build a separate set of allocation and
4045 deallocation routines to be used by OpenSSL, for example memory
4046 pool implementations, or something else, which was previously hard
4047 since Malloc(), Realloc() and Free() were defined as macros having
4048 the values malloc, realloc and free, respectively (except for Win32
4049 compilations). The same is provided for memory debugging code.
4050 OpenSSL already comes with functionality to find memory leaks, but
4051 this gives people a chance to debug other memory problems.
4053 With these changes, a new set of functions and macros have appeared:
4055 CRYPTO_set_mem_debug_functions() [F]
4056 CRYPTO_get_mem_debug_functions() [F]
4057 CRYPTO_dbg_set_options() [F]
4058 CRYPTO_dbg_get_options() [F]
4059 CRYPTO_malloc_debug_init() [M]
4061 The memory debug functions are NULL by default, unless the library
4062 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
4063 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
4064 gives the standard debugging functions that come with OpenSSL) or
4065 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
4066 provided by the library user) must be used. When the standard
4067 debugging functions are used, CRYPTO_dbg_set_options can be used to
4068 request additional information:
4069 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
4070 the CRYPTO_MDEBUG_xxx macro when compiling the library.
4072 Also, things like CRYPTO_set_mem_functions will always give the
4073 expected result (the new set of functions is used for allocation
4074 and deallocation) at all times, regardless of platform and compiler
4077 To finish it up, some functions that were never use in any other
4078 way than through macros have a new API and new semantic:
4081 CRYPTO_dbg_realloc()
4084 All macros of value have retained their old syntax.
4085 [Richard Levitte and Bodo Moeller]
4087 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
4088 ordering of SMIMECapabilities wasn't in "strength order" and there
4089 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
4093 *) Some ASN1 types with illegal zero length encoding (INTEGER,
4094 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
4095 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
4097 *) Merge in my S/MIME library for OpenSSL. This provides a simple
4098 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
4099 functionality to handle multipart/signed properly) and a utility
4100 called 'smime' to call all this stuff. This is based on code I
4101 originally wrote for Celo who have kindly allowed it to be
4102 included in OpenSSL.
4105 *) Add variants des_set_key_checked and des_set_key_unchecked of
4106 des_set_key (aka des_key_sched). Global variable des_check_key
4107 decides which of these is called by des_set_key; this way
4108 des_check_key behaves as it always did, but applications and
4109 the library itself, which was buggy for des_check_key == 1,
4110 have a cleaner way to pick the version they need.
4113 *) New function PKCS12_newpass() which changes the password of a
4117 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
4118 dynamic mix. In both cases the ids can be used as an index into the
4119 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
4120 functions so they accept a list of the field values and the
4121 application doesn't need to directly manipulate the X509_TRUST
4125 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
4129 *) Modify the way the V3 extension code looks up extensions. This now
4130 works in a similar way to the object code: we have some "standard"
4131 extensions in a static table which is searched with OBJ_bsearch()
4132 and the application can add dynamic ones if needed. The file
4133 crypto/x509v3/ext_dat.h now has the info: this file needs to be
4134 updated whenever a new extension is added to the core code and kept
4135 in ext_nid order. There is a simple program 'tabtest.c' which checks
4136 this. New extensions are not added too often so this file can readily
4137 be maintained manually.
4139 There are two big advantages in doing things this way. The extensions
4140 can be looked up immediately and no longer need to be "added" using
4141 X509V3_add_standard_extensions(): this function now does nothing.
4142 [Side note: I get *lots* of email saying the extension code doesn't
4143 work because people forget to call this function]
4144 Also no dynamic allocation is done unless new extensions are added:
4145 so if we don't add custom extensions there is no need to call
4146 X509V3_EXT_cleanup().
4149 *) Modify enc utility's salting as follows: make salting the default. Add a
4150 magic header, so unsalted files fail gracefully instead of just decrypting
4151 to garbage. This is because not salting is a big security hole, so people
4152 should be discouraged from doing it.
4155 *) Fixes and enhancements to the 'x509' utility. It allowed a message
4156 digest to be passed on the command line but it only used this
4157 parameter when signing a certificate. Modified so all relevant
4158 operations are affected by the digest parameter including the
4159 -fingerprint and -x509toreq options. Also -x509toreq choked if a
4160 DSA key was used because it didn't fix the digest.
4163 *) Initial certificate chain verify code. Currently tests the untrusted
4164 certificates for consistency with the verify purpose (which is set
4165 when the X509_STORE_CTX structure is set up) and checks the pathlength.
4167 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
4168 this is because it will reject chains with invalid extensions whereas
4169 every previous version of OpenSSL and SSLeay made no checks at all.
4171 Trust code: checks the root CA for the relevant trust settings. Trust
4172 settings have an initial value consistent with the verify purpose: e.g.
4173 if the verify purpose is for SSL client use it expects the CA to be
4174 trusted for SSL client use. However the default value can be changed to
4175 permit custom trust settings: one example of this would be to only trust
4176 certificates from a specific "secure" set of CAs.
4178 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
4179 which should be used for version portability: especially since the
4180 verify structure is likely to change more often now.
4182 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
4183 to set them. If not set then assume SSL clients will verify SSL servers
4186 Two new options to the verify program: -untrusted allows a set of
4187 untrusted certificates to be passed in and -purpose which sets the
4188 intended purpose of the certificate. If a purpose is set then the
4189 new chain verify code is used to check extension consistency.
4192 *) Support for the authority information access extension.
4195 *) Modify RSA and DSA PEM read routines to transparently handle
4196 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
4197 public keys in a format compatible with certificate
4198 SubjectPublicKeyInfo structures. Unfortunately there were already
4199 functions called *_PublicKey_* which used various odd formats so
4200 these are retained for compatibility: however the DSA variants were
4201 never in a public release so they have been deleted. Changed dsa/rsa
4202 utilities to handle the new format: note no releases ever handled public
4203 keys so we should be OK.
4205 The primary motivation for this change is to avoid the same fiasco
4206 that dogs private keys: there are several incompatible private key
4207 formats some of which are standard and some OpenSSL specific and
4208 require various evil hacks to allow partial transparent handling and
4209 even then it doesn't work with DER formats. Given the option anything
4210 other than PKCS#8 should be dumped: but the other formats have to
4211 stay in the name of compatibility.
4213 With public keys and the benefit of hindsight one standard format
4214 is used which works with EVP_PKEY, RSA or DSA structures: though
4215 it clearly returns an error if you try to read the wrong kind of key.
4217 Added a -pubkey option to the 'x509' utility to output the public key.
4218 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
4219 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
4220 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
4221 that do the same as the EVP_PKEY_assign_*() except they up the
4222 reference count of the added key (they don't "swallow" the
4226 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
4227 CRLs would fail if the file contained no certificates or no CRLs:
4228 added a new function to read in both types and return the number
4229 read: this means that if none are read it will be an error. The
4230 DER versions of the certificate and CRL reader would always fail
4231 because it isn't possible to mix certificates and CRLs in DER format
4232 without choking one or the other routine. Changed this to just read
4233 a certificate: this is the best we can do. Also modified the code
4234 in apps/verify.c to take notice of return codes: it was previously
4235 attempting to read in certificates from NULL pointers and ignoring
4236 any errors: this is one reason why the cert and CRL reader seemed
4237 to work. It doesn't check return codes from the default certificate
4238 routines: these may well fail if the certificates aren't installed.
4241 *) Code to support otherName option in GeneralName.
4244 *) First update to verify code. Change the verify utility
4245 so it warns if it is passed a self signed certificate:
4246 for consistency with the normal behaviour. X509_verify
4247 has been modified to it will now verify a self signed
4248 certificate if *exactly* the same certificate appears
4249 in the store: it was previously impossible to trust a
4250 single self signed certificate. This means that:
4251 openssl verify ss.pem
4252 now gives a warning about a self signed certificate but
4253 openssl verify -CAfile ss.pem ss.pem
4257 *) For servers, store verify_result in SSL_SESSION data structure
4258 (and add it to external session representation).
4259 This is needed when client certificate verifications fails,
4260 but an application-provided verification callback (set by
4261 SSL_CTX_set_cert_verify_callback) allows accepting the session
4262 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
4263 but returns 1): When the session is reused, we have to set
4264 ssl->verify_result to the appropriate error code to avoid
4266 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
4268 *) Fix a bug in the new PKCS#7 code: it didn't consider the
4269 case in PKCS7_dataInit() where the signed PKCS7 structure
4270 didn't contain any existing data because it was being created.
4271 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
4273 *) Add a salt to the key derivation routines in enc.c. This
4274 forms the first 8 bytes of the encrypted file. Also add a
4275 -S option to allow a salt to be input on the command line.
4278 *) New function X509_cmp(). Oddly enough there wasn't a function
4279 to compare two certificates. We do this by working out the SHA1
4280 hash and comparing that. X509_cmp() will be needed by the trust
4284 *) SSL_get1_session() is like SSL_get_session(), but increments
4285 the reference count in the SSL_SESSION returned.
4286 [Geoff Thorpe <geoff@eu.c2.net>]
4288 *) Fix for 'req': it was adding a null to request attributes.
4289 Also change the X509_LOOKUP and X509_INFO code to handle
4290 certificate auxiliary information.
4293 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
4297 *) Add the possibility to add extra information to the memory leak
4298 detecting output, to form tracebacks, showing from where each
4299 allocation was originated: CRYPTO_push_info("constant string") adds
4300 the string plus current file name and line number to a per-thread
4301 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
4302 is like calling CYRPTO_pop_info() until the stack is empty.
4303 Also updated memory leak detection code to be multi-thread-safe.
4306 *) Add options -text and -noout to pkcs7 utility and delete the
4307 encryption options which never did anything. Update docs.
4310 *) Add options to some of the utilities to allow the pass phrase
4311 to be included on either the command line (not recommended on
4312 OSes like Unix) or read from the environment. Update the
4313 manpages and fix a few bugs.
4316 *) Add a few manpages for some of the openssl commands.
4319 *) Fix the -revoke option in ca. It was freeing up memory twice,
4320 leaking and not finding already revoked certificates.
4323 *) Extensive changes to support certificate auxiliary information.
4324 This involves the use of X509_CERT_AUX structure and X509_AUX
4325 functions. An X509_AUX function such as PEM_read_X509_AUX()
4326 can still read in a certificate file in the usual way but it
4327 will also read in any additional "auxiliary information". By
4328 doing things this way a fair degree of compatibility can be
4329 retained: existing certificates can have this information added
4330 using the new 'x509' options.
4332 Current auxiliary information includes an "alias" and some trust
4333 settings. The trust settings will ultimately be used in enhanced
4334 certificate chain verification routines: currently a certificate
4335 can only be trusted if it is self signed and then it is trusted
4339 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
4340 The problem was that one of the replacement routines had not been working
4341 since SSLeay releases. For now the offending routine has been replaced
4342 with non-optimised assembler. Even so, this now gives around 95%
4343 performance improvement for 1024 bit RSA signs.
4346 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
4347 handling. Most clients have the effective key size in bits equal to
4348 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
4349 A few however don't do this and instead use the size of the decrypted key
4350 to determine the RC2 key length and the AlgorithmIdentifier to determine
4351 the effective key length. In this case the effective key length can still
4352 be 40 bits but the key length can be 168 bits for example. This is fixed
4353 by manually forcing an RC2 key into the EVP_PKEY structure because the
4354 EVP code can't currently handle unusual RC2 key sizes: it always assumes
4355 the key length and effective key length are equal.
4358 *) Add a bunch of functions that should simplify the creation of
4359 X509_NAME structures. Now you should be able to do:
4360 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
4361 and have it automatically work out the correct field type and fill in
4362 the structures. The more adventurous can try:
4363 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
4364 and it will (hopefully) work out the correct multibyte encoding.
4367 *) Change the 'req' utility to use the new field handling and multibyte
4368 copy routines. Before the DN field creation was handled in an ad hoc
4369 way in req, ca, and x509 which was rather broken and didn't support
4370 BMPStrings or UTF8Strings. Since some software doesn't implement
4371 BMPStrings or UTF8Strings yet, they can be enabled using the config file
4372 using the dirstring_type option. See the new comment in the default
4373 openssl.cnf for more info.
4376 *) Make crypto/rand/md_rand.c more robust:
4377 - Assure unique random numbers after fork().
4378 - Make sure that concurrent threads access the global counter and
4379 md serializably so that we never lose entropy in them
4380 or use exactly the same state in multiple threads.
4381 Access to the large state is not always serializable because
4382 the additional locking could be a performance killer, and
4383 md should be large enough anyway.
4386 *) New file apps/app_rand.c with commonly needed functionality
4387 for handling the random seed file.
4389 Use the random seed file in some applications that previously did not:
4391 dsaparam -genkey (which also ignored its '-rand' option),
4394 x509 (when signing).
4395 Except on systems with /dev/urandom, it is crucial to have a random
4396 seed file at least for key creation, DSA signing, and for DH exchanges;
4397 for RSA signatures we could do without one.
4399 gendh and gendsa (unlike genrsa) used to read only the first byte
4400 of each file listed in the '-rand' option. The function as previously
4401 found in genrsa is now in app_rand.c and is used by all programs
4402 that support '-rand'.
4405 *) In RAND_write_file, use mode 0600 for creating files;
4406 don't just chmod when it may be too late.
4409 *) Report an error from X509_STORE_load_locations
4410 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
4413 *) New function ASN1_mbstring_copy() this copies a string in either
4414 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
4415 into an ASN1_STRING type. A mask of permissible types is passed
4416 and it chooses the "minimal" type to use or an error if not type
4420 *) Add function equivalents to the various macros in asn1.h. The old
4421 macros are retained with an M_ prefix. Code inside the library can
4422 use the M_ macros. External code (including the openssl utility)
4423 should *NOT* in order to be "shared library friendly".
4426 *) Add various functions that can check a certificate's extensions
4427 to see if it usable for various purposes such as SSL client,
4428 server or S/MIME and CAs of these types. This is currently
4429 VERY EXPERIMENTAL but will ultimately be used for certificate chain
4430 verification. Also added a -purpose flag to x509 utility to
4431 print out all the purposes.
4434 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
4438 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
4439 for, obtain and decode and extension and obtain its critical flag.
4440 This allows all the necessary extension code to be handled in a
4441 single function call.
4444 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
4445 platforms. See crypto/rc4/rc4_enc.c for further details.
4448 *) New -noout option to asn1parse. This causes no output to be produced
4449 its main use is when combined with -strparse and -out to extract data
4450 from a file (which may not be in ASN.1 format).
4453 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
4454 when producing the local key id.
4455 [Richard Levitte <levitte@stacken.kth.se>]
4457 *) New option -dhparam in s_server. This allows a DH parameter file to be
4458 stated explicitly. If it is not stated then it tries the first server
4459 certificate file. The previous behaviour hard coded the filename
4463 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
4464 a public key to be input or output. For example:
4465 openssl rsa -in key.pem -pubout -out pubkey.pem
4466 Also added necessary DSA public key functions to handle this.
4469 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
4470 in the message. This was handled by allowing
4471 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
4472 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
4474 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
4475 to the end of the strings whereas this didn't. This would cause problems
4476 if strings read with d2i_ASN1_bytes() were later modified.
4477 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
4479 *) Fix for base64 decode bug. When a base64 bio reads only one line of
4480 data and it contains EOF it will end up returning an error. This is
4481 caused by input 46 bytes long. The cause is due to the way base64
4482 BIOs find the start of base64 encoded data. They do this by trying a
4483 trial decode on each line until they find one that works. When they
4484 do a flag is set and it starts again knowing it can pass all the
4485 data directly through the decoder. Unfortunately it doesn't reset
4486 the context it uses. This means that if EOF is reached an attempt
4487 is made to pass two EOFs through the context and this causes the
4488 resulting error. This can also cause other problems as well. As is
4489 usual with these problems it takes *ages* to find and the fix is
4490 trivial: move one line.
4491 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
4493 *) Ugly workaround to get s_client and s_server working under Windows. The
4494 old code wouldn't work because it needed to select() on sockets and the
4495 tty (for keypresses and to see if data could be written). Win32 only
4496 supports select() on sockets so we select() with a 1s timeout on the
4497 sockets and then see if any characters are waiting to be read, if none
4498 are present then we retry, we also assume we can always write data to
4499 the tty. This isn't nice because the code then blocks until we've
4500 received a complete line of data and it is effectively polling the
4501 keyboard at 1s intervals: however it's quite a bit better than not
4502 working at all :-) A dedicated Windows application might handle this
4503 with an event loop for example.
4506 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
4507 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
4508 will be called when RSA_sign() and RSA_verify() are used. This is useful
4509 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
4510 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
4511 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
4512 This necessitated the support of an extra signature type NID_md5_sha1
4513 for SSL signatures and modifications to the SSL library to use it instead
4514 of calling RSA_public_decrypt() and RSA_private_encrypt().
4517 *) Add new -verify -CAfile and -CApath options to the crl program, these
4518 will lookup a CRL issuers certificate and verify the signature in a
4519 similar way to the verify program. Tidy up the crl program so it
4520 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
4521 less strict. It will now permit CRL extensions even if it is not
4522 a V2 CRL: this will allow it to tolerate some broken CRLs.
4525 *) Initialize all non-automatic variables each time one of the openssl
4526 sub-programs is started (this is necessary as they may be started
4527 multiple times from the "OpenSSL>" prompt).
4528 [Lennart Bang, Bodo Moeller]
4530 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
4531 removing all other RSA functionality (this is what NO_RSA does). This
4532 is so (for example) those in the US can disable those operations covered
4533 by the RSA patent while allowing storage and parsing of RSA keys and RSA
4537 *) Non-copying interface to BIO pairs.
4538 (still largely untested)
4541 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
4542 ASCII string. This was handled independently in various places before.
4545 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
4546 UTF8 strings a character at a time.
4549 *) Use client_version from client hello to select the protocol
4550 (s23_srvr.c) and for RSA client key exchange verification
4551 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
4554 *) Add various utility functions to handle SPKACs, these were previously
4555 handled by poking round in the structure internals. Added new function
4556 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
4557 print, verify and generate SPKACs. Based on an original idea from
4558 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
4561 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
4564 *) Allow the config file extension section to be overwritten on the
4565 command line. Based on an original idea from Massimiliano Pala
4566 <madwolf@comune.modena.it>. The new option is called -extensions
4567 and can be applied to ca, req and x509. Also -reqexts to override
4568 the request extensions in req and -crlexts to override the crl extensions
4572 *) Add new feature to the SPKAC handling in ca. Now you can include
4573 the same field multiple times by preceding it by "XXXX." for example:
4576 this is the same syntax as used in the req config file.
4579 *) Allow certificate extensions to be added to certificate requests. These
4580 are specified in a 'req_extensions' option of the req section of the
4581 config file. They can be printed out with the -text option to req but
4582 are otherwise ignored at present.
4585 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
4586 data read consists of only the final block it would not decrypted because
4587 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
4588 A misplaced 'break' also meant the decrypted final block might not be
4589 copied until the next read.
4592 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
4593 a few extra parameters to the DH structure: these will be useful if
4594 for example we want the value of 'q' or implement X9.42 DH.
4597 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
4598 provides hooks that allow the default DSA functions or functions on a
4599 "per key" basis to be replaced. This allows hardware acceleration and
4600 hardware key storage to be handled without major modification to the
4601 library. Also added low level modexp hooks and CRYPTO_EX structure and
4602 associated functions.
4605 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
4606 as "read only": it can't be written to and the buffer it points to will
4607 not be freed. Reading from a read only BIO is much more efficient than
4608 a normal memory BIO. This was added because there are several times when
4609 an area of memory needs to be read from a BIO. The previous method was
4610 to create a memory BIO and write the data to it, this results in two
4611 copies of the data and an O(n^2) reading algorithm. There is a new
4612 function BIO_new_mem_buf() which creates a read only memory BIO from
4613 an area of memory. Also modified the PKCS#7 routines to use read only
4617 *) Bugfix: ssl23_get_client_hello did not work properly when called in
4618 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
4619 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
4620 but a retry condition occured while trying to read the rest.
4623 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
4624 NID_pkcs7_encrypted by default: this was wrong since this should almost
4625 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
4626 the encrypted data type: this is a more sensible place to put it and it
4627 allows the PKCS#12 code to be tidied up that duplicated this
4631 *) Changed obj_dat.pl script so it takes its input and output files on
4632 the command line. This should avoid shell escape redirection problems
4636 *) Initial support for certificate extension requests, these are included
4637 in things like Xenroll certificate requests. Included functions to allow
4638 extensions to be obtained and added.
4641 *) -crlf option to s_client and s_server for sending newlines as
4642 CRLF (as required by many protocols).
4645 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
4647 *) Install libRSAglue.a when OpenSSL is built with RSAref.
4648 [Ralf S. Engelschall]
4650 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
4651 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
4653 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
4657 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
4658 DH parameters/keys (q is lost during that conversion, but the resulting
4659 DH parameters contain its length).
4661 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
4662 much faster than DH_generate_parameters (which creates parameters
4663 where p = 2*q + 1), and also the smaller q makes DH computations
4664 much more efficient (160-bit exponentiation instead of 1024-bit
4665 exponentiation); so this provides a convenient way to support DHE
4666 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
4667 utter importance to use
4668 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
4670 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
4671 when such DH parameters are used, because otherwise small subgroup
4672 attacks may become possible!
4675 *) Avoid memory leak in i2d_DHparams.
4678 *) Allow the -k option to be used more than once in the enc program:
4679 this allows the same encrypted message to be read by multiple recipients.
4682 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
4683 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
4684 it will always use the numerical form of the OID, even if it has a short
4688 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
4689 method only got called if p,q,dmp1,dmq1,iqmp components were present,
4690 otherwise bn_mod_exp was called. In the case of hardware keys for example
4691 no private key components need be present and it might store extra data
4692 in the RSA structure, which cannot be accessed from bn_mod_exp.
4693 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
4694 private key operations.
4697 *) Added support for SPARC Linux.
4700 *) pem_password_cb function type incompatibly changed from
4701 typedef int pem_password_cb(char *buf, int size, int rwflag);
4703 ....(char *buf, int size, int rwflag, void *userdata);
4704 so that applications can pass data to their callbacks:
4705 The PEM[_ASN1]_{read,write}... functions and macros now take an
4706 additional void * argument, which is just handed through whenever
4707 the password callback is called.
4708 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
4710 New function SSL_CTX_set_default_passwd_cb_userdata.
4712 Compatibility note: As many C implementations push function arguments
4713 onto the stack in reverse order, the new library version is likely to
4714 interoperate with programs that have been compiled with the old
4715 pem_password_cb definition (PEM_whatever takes some data that
4716 happens to be on the stack as its last argument, and the callback
4717 just ignores this garbage); but there is no guarantee whatsoever that
4720 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
4721 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
4722 problems not only on Windows, but also on some Unix platforms.
4723 To avoid problematic command lines, these definitions are now in an
4724 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
4725 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
4728 *) MIPS III/IV assembler module is reimplemented.
4731 *) More DES library cleanups: remove references to srand/rand and
4732 delete an unused file.
4735 *) Add support for the the free Netwide assembler (NASM) under Win32,
4736 since not many people have MASM (ml) and it can be hard to obtain.
4737 This is currently experimental but it seems to work OK and pass all
4738 the tests. Check out INSTALL.W32 for info.
4741 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
4742 without temporary keys kept an extra copy of the server key,
4743 and connections with temporary keys did not free everything in case
4747 *) New function RSA_check_key and new openssl rsa option -check
4748 for verifying the consistency of RSA keys.
4749 [Ulf Moeller, Bodo Moeller]
4751 *) Various changes to make Win32 compile work:
4752 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
4753 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
4754 comparison" warnings.
4755 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
4758 *) Add a debugging option to PKCS#5 v2 key generation function: when
4759 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
4760 derived keys are printed to stderr.
4763 *) Copy the flags in ASN1_STRING_dup().
4764 [Roman E. Pavlov <pre@mo.msk.ru>]
4766 *) The x509 application mishandled signing requests containing DSA
4767 keys when the signing key was also DSA and the parameters didn't match.
4769 It was supposed to omit the parameters when they matched the signing key:
4770 the verifying software was then supposed to automatically use the CA's
4771 parameters if they were absent from the end user certificate.
4773 Omitting parameters is no longer recommended. The test was also
4774 the wrong way round! This was probably due to unusual behaviour in
4775 EVP_cmp_parameters() which returns 1 if the parameters match.
4776 This meant that parameters were omitted when they *didn't* match and
4777 the certificate was useless. Certificates signed with 'ca' didn't have
4779 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
4781 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
4782 The interface is as follows:
4783 Applications can use
4784 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
4785 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
4786 "off" is now the default.
4787 The library internally uses
4788 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
4789 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
4790 to disable memory-checking temporarily.
4792 Some inconsistent states that previously were possible (and were
4793 even the default) are now avoided.
4795 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
4796 with each memory chunk allocated; this is occasionally more helpful
4797 than just having a counter.
4799 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
4801 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
4805 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
4806 which largely parallels "options", but is for changing API behaviour,
4807 whereas "options" are about protocol behaviour.
4808 Initial "mode" flags are:
4810 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
4811 a single record has been written.
4812 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
4813 retries use the same buffer location.
4814 (But all of the contents must be
4818 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
4821 *) Fix problems with no-hmac etc.
4822 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
4824 *) New functions RSA_get_default_method(), RSA_set_method() and
4825 RSA_get_method(). These allows replacement of RSA_METHODs without having
4826 to mess around with the internals of an RSA structure.
4829 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
4830 Also really enable memory leak checks in openssl.c and in some
4832 [Chad C. Mulligan, Bodo Moeller]
4834 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
4835 up the length of negative integers. This has now been simplified to just
4836 store the length when it is first determined and use it later, rather
4837 than trying to keep track of where data is copied and updating it to
4839 [Steve Henson, reported by Brien Wheeler
4840 <bwheeler@authentica-security.com>]
4842 *) Add a new function PKCS7_signatureVerify. This allows the verification
4843 of a PKCS#7 signature but with the signing certificate passed to the
4844 function itself. This contrasts with PKCS7_dataVerify which assumes the
4845 certificate is present in the PKCS#7 structure. This isn't always the
4846 case: certificates can be omitted from a PKCS#7 structure and be
4847 distributed by "out of band" means (such as a certificate database).
4850 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
4851 function prototypes in pem.h, also change util/mkdef.pl to add the
4852 necessary function names.
4855 *) mk1mf.pl (used by Windows builds) did not properly read the
4856 options set by Configure in the top level Makefile, and Configure
4857 was not even able to write more than one option correctly.
4858 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
4861 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
4862 file to be loaded from a BIO or FILE pointer. The BIO version will
4863 for example allow memory BIOs to contain config info.
4866 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
4867 Whoever hopes to achieve shared-library compatibility across versions
4868 must use this, not the compile-time macro.
4869 (Exercise 0.9.4: Which is the minimum library version required by
4871 Note: All this applies only to multi-threaded programs, others don't
4875 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
4876 through a BIO pair triggered the default case, i.e.
4877 SSLerr(...,SSL_R_UNKNOWN_STATE).
4880 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
4881 can use the SSL library even if none of the specific BIOs is
4885 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
4886 for the encoded length.
4887 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
4889 *) Add initial documentation of the X509V3 functions.
4892 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
4893 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
4894 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
4895 secure PKCS#8 private key format with a high iteration count.
4898 *) Fix determination of Perl interpreter: A perl or perl5
4899 _directory_ in $PATH was also accepted as the interpreter.
4900 [Ralf S. Engelschall]
4902 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
4903 wrong with it but it was very old and did things like calling
4904 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
4908 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
4909 to use the new extension code.
4912 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
4913 with macros. This should make it easier to change their form, add extra
4914 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
4918 *) Add to configuration table a new entry that can specify an alternative
4919 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
4920 according to Mark Crispin <MRC@Panda.COM>.
4924 *) DES CBC did not update the IV. Weird.
4927 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
4928 Changing the behaviour of the former might break existing programs --
4929 where IV updating is needed, des_ncbc_encrypt can be used.
4932 *) When bntest is run from "make test" it drives bc to check its
4933 calculations, as well as internally checking them. If an internal check
4934 fails, it needs to cause bc to give a non-zero result or make test carries
4935 on without noticing the failure. Fixed.
4938 *) DES library cleanups.
4941 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
4942 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
4943 ciphers. NOTE: although the key derivation function has been verified
4944 against some published test vectors it has not been extensively tested
4945 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
4949 *) Instead of "mkdir -p", which is not fully portable, use new
4950 Perl script "util/mkdir-p.pl".
4953 *) Rewrite the way password based encryption (PBE) is handled. It used to
4954 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
4955 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
4956 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
4957 the 'parameter' field of the AlgorithmIdentifier is passed to the
4958 underlying key generation function so it must do its own ASN1 parsing.
4959 This has also changed the EVP_PBE_CipherInit() function which now has a
4960 'parameter' argument instead of literal salt and iteration count values
4961 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
4964 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
4965 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
4966 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
4967 KEY" because this clashed with PKCS#8 unencrypted string. Since this
4968 value was just used as a "magic string" and not used directly its
4969 value doesn't matter.
4972 *) Introduce some semblance of const correctness to BN. Shame C doesn't
4976 *) "linux-sparc64" configuration (ultrapenguin).
4977 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
4978 "linux-sparc" configuration.
4979 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
4981 *) config now generates no-xxx options for missing ciphers.
4984 *) Support the EBCDIC character set (work in progress).
4985 File ebcdic.c not yet included because it has a different license.
4986 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
4988 *) Support BS2000/OSD-POSIX.
4989 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
4991 *) Make callbacks for key generation use void * instead of char *.
4994 *) Make S/MIME samples compile (not yet tested).
4997 *) Additional typesafe stacks.
5000 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
5004 Changes between 0.9.3 and 0.9.3a [29 May 1999]
5006 *) New configuration variant "sco5-gcc".
5008 *) Updated some demos.
5009 [Sean O Riordain, Wade Scholine]
5011 *) Add missing BIO_free at exit of pkcs12 application.
5014 *) Fix memory leak in conf.c.
5017 *) Updates for Win32 to assembler version of MD5.
5020 *) Set #! path to perl in apps/der_chop to where we found it
5021 instead of using a fixed path.
5024 *) SHA library changes for irix64-mips4-cc.
5027 *) Improvements for VMS support.
5031 Changes between 0.9.2b and 0.9.3 [24 May 1999]
5033 *) Bignum library bug fix. IRIX 6 passes "make test" now!
5034 This also avoids the problems with SC4.2 and unpatched SC5.
5035 [Andy Polyakov <appro@fy.chalmers.se>]
5037 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
5038 These are required because of the typesafe stack would otherwise break
5039 existing code. If old code used a structure member which used to be STACK
5040 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
5041 sk_num or sk_value it would produce an error because the num, data members
5042 are not present in STACK_OF. Now it just produces a warning. sk_set
5043 replaces the old method of assigning a value to sk_value
5044 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
5045 that does this will no longer work (and should use sk_set instead) but
5046 this could be regarded as a "questionable" behaviour anyway.
5049 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
5050 correctly handle encrypted S/MIME data.
5053 *) Change type of various DES function arguments from des_cblock
5054 (which means, in function argument declarations, pointer to char)
5055 to des_cblock * (meaning pointer to array with 8 char elements),
5056 which allows the compiler to do more typechecking; it was like
5057 that back in SSLeay, but with lots of ugly casts.
5059 Introduce new type const_des_cblock.
5062 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
5063 problems: find RecipientInfo structure that matches recipient certificate
5064 and initialise the ASN1 structures properly based on passed cipher.
5067 *) Belatedly make the BN tests actually check the results.
5070 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
5071 to and from BNs: it was completely broken. New compilation option
5072 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
5073 key elements as negative integers.
5076 *) Reorganize and speed up MD5.
5077 [Andy Polyakov <appro@fy.chalmers.se>]
5080 [Richard Levitte <richard@levitte.org>]
5082 *) New option -out to asn1parse to allow the parsed structure to be
5083 output to a file. This is most useful when combined with the -strparse
5084 option to examine the output of things like OCTET STRINGS.
5087 *) Make SSL library a little more fool-proof by not requiring any longer
5088 that SSL_set_{accept,connect}_state be called before
5089 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
5090 in many applications because usually everything *appeared* to work as
5091 intended anyway -- now it really works as intended).
5094 *) Move openssl.cnf out of lib/.
5097 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
5098 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
5099 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
5100 [Ralf S. Engelschall]
5102 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
5103 handle PKCS#7 enveloped data properly.
5104 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
5106 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
5107 copying pointers. The cert_st handling is changed by this in
5108 various ways (and thus what used to be known as ctx->default_cert
5109 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
5110 any longer when s->cert does not give us what we need).
5111 ssl_cert_instantiate becomes obsolete by this change.
5112 As soon as we've got the new code right (possibly it already is?),
5113 we have solved a couple of bugs of the earlier code where s->cert
5114 was used as if it could not have been shared with other SSL structures.
5116 Note that using the SSL API in certain dirty ways now will result
5117 in different behaviour than observed with earlier library versions:
5118 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
5119 does not influence s as it used to.
5121 In order to clean up things more thoroughly, inside SSL_SESSION
5122 we don't use CERT any longer, but a new structure SESS_CERT
5123 that holds per-session data (if available); currently, this is
5124 the peer's certificate chain and, for clients, the server's certificate
5125 and temporary key. CERT holds only those values that can have
5126 meaningful defaults in an SSL_CTX.
5129 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
5130 from the internal representation. Various PKCS#7 fixes: remove some
5131 evil casts and set the enc_dig_alg field properly based on the signing
5135 *) Allow PKCS#12 password to be set from the command line or the
5136 environment. Let 'ca' get its config file name from the environment
5137 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
5141 *) Allow certificate policies extension to use an IA5STRING for the
5142 organization field. This is contrary to the PKIX definition but
5143 VeriSign uses it and IE5 only recognises this form. Document 'x509'
5147 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
5148 without disallowing inline assembler and the like for non-pedantic builds.
5151 *) Support Borland C++ builder.
5152 [Janez Jere <jj@void.si>, modified by Ulf Möller]
5157 *) SHA-1 cleanups and performance enhancements.
5158 [Andy Polyakov <appro@fy.chalmers.se>]
5160 *) Sparc v8plus assembler for the bignum library.
5161 [Andy Polyakov <appro@fy.chalmers.se>]
5163 *) Accept any -xxx and +xxx compiler options in Configure.
5166 *) Update HPUX configuration.
5169 *) Add missing sk_<type>_unshift() function to safestack.h
5170 [Ralf S. Engelschall]
5172 *) New function SSL_CTX_use_certificate_chain_file that sets the
5173 "extra_cert"s in addition to the certificate. (This makes sense
5174 only for "PEM" format files, as chains as a whole are not
5178 *) Support verify_depth from the SSL API.
5179 x509_vfy.c had what can be considered an off-by-one-error:
5180 Its depth (which was not part of the external interface)
5181 was actually counting the number of certificates in a chain;
5182 now it really counts the depth.
5185 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
5186 instead of X509err, which often resulted in confusing error
5187 messages since the error codes are not globally unique
5188 (e.g. an alleged error in ssl3_accept when a certificate
5189 didn't match the private key).
5191 *) New function SSL_CTX_set_session_id_context that allows to set a default
5192 value (so that you don't need SSL_set_session_id_context for each
5193 connection using the SSL_CTX).
5196 *) OAEP decoding bug fix.
5199 *) Support INSTALL_PREFIX for package builders, as proposed by
5203 *) New Configure options "threads" and "no-threads". For systems
5204 where the proper compiler options are known (currently Solaris
5205 and Linux), "threads" is the default.
5208 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
5211 *) Install various scripts to $(OPENSSLDIR)/misc, not to
5212 $(INSTALLTOP)/bin -- they shouldn't clutter directories
5213 such as /usr/local/bin.
5216 *) "make linux-shared" to build shared libraries.
5217 [Niels Poppe <niels@netbox.org>]
5219 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
5222 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
5223 extension adding in x509 utility.
5226 *) Remove NOPROTO sections and error code comments.
5229 *) Partial rewrite of the DEF file generator to now parse the ANSI
5233 *) New Configure options --prefix=DIR and --openssldir=DIR.
5236 *) Complete rewrite of the error code script(s). It is all now handled
5237 by one script at the top level which handles error code gathering,
5238 header rewriting and C source file generation. It should be much better
5239 than the old method: it now uses a modified version of Ulf's parser to
5240 read the ANSI prototypes in all header files (thus the old K&R definitions
5241 aren't needed for error creation any more) and do a better job of
5242 translating function codes into names. The old 'ASN1 error code imbedded
5243 in a comment' is no longer necessary and it doesn't use .err files which
5244 have now been deleted. Also the error code call doesn't have to appear all
5245 on one line (which resulted in some large lines...).
5248 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
5251 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
5252 0 (which usually indicates a closed connection), but continue reading.
5255 *) Fix some race conditions.
5258 *) Add support for CRL distribution points extension. Add Certificate
5259 Policies and CRL distribution points documentation.
5262 *) Move the autogenerated header file parts to crypto/opensslconf.h.
5265 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
5266 8 of keying material. Merlin has also confirmed interop with this fix
5267 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
5268 [Merlin Hughes <merlin@baltimore.ie>]
5270 *) Fix lots of warnings.
5271 [Richard Levitte <levitte@stacken.kth.se>]
5273 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
5274 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
5275 [Richard Levitte <levitte@stacken.kth.se>]
5277 *) Fix problems with sizeof(long) == 8.
5278 [Andy Polyakov <appro@fy.chalmers.se>]
5280 *) Change functions to ANSI C.
5283 *) Fix typos in error codes.
5284 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
5286 *) Remove defunct assembler files from Configure.
5289 *) SPARC v8 assembler BIGNUM implementation.
5290 [Andy Polyakov <appro@fy.chalmers.se>]
5292 *) Support for Certificate Policies extension: both print and set.
5293 Various additions to support the r2i method this uses.
5296 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
5297 return a const string when you are expecting an allocated buffer.
5300 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
5301 types DirectoryString and DisplayText.
5304 *) Add code to allow r2i extensions to access the configuration database,
5305 add an LHASH database driver and add several ctx helper functions.
5308 *) Fix an evil bug in bn_expand2() which caused various BN functions to
5309 fail when they extended the size of a BIGNUM.
5312 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
5313 support typesafe stack.
5316 *) Fix typo in SSL_[gs]et_options().
5317 [Nils Frostberg <nils@medcom.se>]
5319 *) Delete various functions and files that belonged to the (now obsolete)
5320 old X509V3 handling code.
5323 *) New Configure option "rsaref".
5326 *) Don't auto-generate pem.h.
5329 *) Introduce type-safe ASN.1 SETs.
5332 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
5333 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
5335 *) Introduce type-safe STACKs. This will almost certainly break lots of code
5336 that links with OpenSSL (well at least cause lots of warnings), but fear
5337 not: the conversion is trivial, and it eliminates loads of evil casts. A
5338 few STACKed things have been converted already. Feel free to convert more.
5339 In the fullness of time, I'll do away with the STACK type altogether.
5342 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
5343 specified in <certfile> by updating the entry in the index.txt file.
5344 This way one no longer has to edit the index.txt file manually for
5345 revoking a certificate. The -revoke option does the gory details now.
5346 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
5348 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
5349 `-text' option at all and this way the `-noout -text' combination was
5350 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
5351 [Ralf S. Engelschall]
5353 *) Make sure a corresponding plain text error message exists for the
5354 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
5355 verify callback function determined that a certificate was revoked.
5356 [Ralf S. Engelschall]
5358 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
5359 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
5360 all available cipers including rc5, which was forgotten until now.
5361 In order to let the testing shell script know which algorithms
5362 are available, a new (up to now undocumented) command
5363 "openssl list-cipher-commands" is used.
5366 *) Bugfix: s_client occasionally would sleep in select() when
5367 it should have checked SSL_pending() first.
5370 *) New functions DSA_do_sign and DSA_do_verify to provide access to
5371 the raw DSA values prior to ASN.1 encoding.
5374 *) Tweaks to Configure
5375 [Niels Poppe <niels@netbox.org>]
5377 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
5381 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
5384 *) New config option to avoid instructions that are illegal on the 80386.
5385 The default code is faster, but requires at least a 486.
5388 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
5389 SSL2_SERVER_VERSION (not used at all) macros, which are now the
5390 same as SSL2_VERSION anyway.
5393 *) New "-showcerts" option for s_client.
5396 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
5397 application. Various cleanups and fixes.
5400 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
5401 modify error routines to work internally. Add error codes and PBE init
5402 to library startup routines.
5405 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
5406 packing functions to asn1 and evp. Changed function names and error
5407 codes along the way.
5410 *) PKCS12 integration: and so it begins... First of several patches to
5411 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
5412 objects to objects.h
5415 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
5416 and display support for Thawte strong extranet extension.
5419 *) Add LinuxPPC support.
5420 [Jeff Dubrule <igor@pobox.org>]
5422 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
5423 bn_div_words in alpha.s.
5424 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
5426 *) Make sure the RSA OAEP test is skipped under -DRSAref because
5427 OAEP isn't supported when OpenSSL is built with RSAref.
5428 [Ulf Moeller <ulf@fitug.de>]
5430 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
5431 so they no longer are missing under -DNOPROTO.
5432 [Soren S. Jorvang <soren@t.dk>]
5435 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
5437 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
5438 doesn't work when the session is reused. Coming soon!
5441 *) Fix a security hole, that allows sessions to be reused in the wrong
5442 context thus bypassing client cert protection! All software that uses
5443 client certs and session caches in multiple contexts NEEDS PATCHING to
5444 allow session reuse! A fuller solution is in the works.
5445 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
5447 *) Some more source tree cleanups (removed obsolete files
5448 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
5449 permission on "config" script to be executable) and a fix for the INSTALL
5451 [Ulf Moeller <ulf@fitug.de>]
5453 *) Remove some legacy and erroneous uses of malloc, free instead of
5455 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
5457 *) Make rsa_oaep_test return non-zero on error.
5458 [Ulf Moeller <ulf@fitug.de>]
5460 *) Add support for native Solaris shared libraries. Configure
5461 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
5462 if someone would make that last step automatic.
5463 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
5465 *) ctx_size was not built with the right compiler during "make links". Fixed.
5468 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
5469 except NULL ciphers". This means the default cipher list will no longer
5470 enable NULL ciphers. They need to be specifically enabled e.g. with
5471 the string "DEFAULT:eNULL".
5474 *) Fix to RSA private encryption routines: if p < q then it would
5475 occasionally produce an invalid result. This will only happen with
5476 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
5479 *) Be less restrictive and allow also `perl util/perlpath.pl
5480 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
5481 because this way one can also use an interpreter named `perl5' (which is
5482 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
5483 installed as `perl').
5484 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
5486 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
5487 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
5489 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
5490 advapi32.lib to Win32 build and change the pem test comparision
5491 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
5492 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
5493 and crypto/des/ede_cbcm_enc.c.
5496 *) DES quad checksum was broken on big-endian architectures. Fixed.
5499 *) Comment out two functions in bio.h that aren't implemented. Fix up the
5500 Win32 test batch file so it (might) work again. The Win32 test batch file
5501 is horrible: I feel ill....
5504 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
5505 in e_os.h. Audit of header files to check ANSI and non ANSI
5506 sections: 10 functions were absent from non ANSI section and not exported
5507 from Windows DLLs. Fixed up libeay.num for new functions.
5510 *) Make `openssl version' output lines consistent.
5511 [Ralf S. Engelschall]
5513 *) Fix Win32 symbol export lists for BIO functions: Added
5514 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
5515 to ms/libeay{16,32}.def.
5516 [Ralf S. Engelschall]
5518 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
5519 fine under Unix and passes some trivial tests I've now added. But the
5520 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
5521 added to make sure no one expects that this stuff really works in the
5522 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
5523 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
5525 [Ralf S. Engelschall]
5527 *) Fix the generation of two part addresses in perl.
5528 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
5530 *) Add config entry for Linux on MIPS.
5531 [John Tobey <jtobey@channel1.com>]
5533 *) Make links whenever Configure is run, unless we are on Windoze.
5536 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
5537 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
5541 *) Add a useful kludge to allow package maintainers to specify compiler and
5542 other platforms details on the command line without having to patch the
5543 Configure script everytime: One now can use ``perl Configure
5544 <id>:<details>'', i.e. platform ids are allowed to have details appended
5545 to them (seperated by colons). This is treated as there would be a static
5546 pre-configured entry in Configure's %table under key <id> with value
5547 <details> and ``perl Configure <id>'' is called. So, when you want to
5548 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
5549 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
5550 now, which overrides the FreeBSD-elf entry on-the-fly.
5551 [Ralf S. Engelschall]
5553 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
5556 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
5557 on the `perl Configure ...' command line. This way one can compile
5558 OpenSSL libraries with Position Independent Code (PIC) which is needed
5559 for linking it into DSOs.
5560 [Ralf S. Engelschall]
5562 *) Remarkably, export ciphers were totally broken and no-one had noticed!
5566 *) Cleaned up the LICENSE document: The official contact for any license
5567 questions now is the OpenSSL core team under openssl-core@openssl.org.
5568 And add a paragraph about the dual-license situation to make sure people
5569 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
5570 to the OpenSSL toolkit.
5571 [Ralf S. Engelschall]
5573 *) General source tree makefile cleanups: Made `making xxx in yyy...'
5574 display consistent in the source tree and replaced `/bin/rm' by `rm'.
5575 Additonally cleaned up the `make links' target: Remove unnecessary
5576 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
5577 to speed processing and no longer clutter the display with confusing
5578 stuff. Instead only the actually done links are displayed.
5579 [Ralf S. Engelschall]
5581 *) Permit null encryption ciphersuites, used for authentication only. It used
5582 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
5583 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
5587 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
5588 signed attributes when verifying signatures (this would break them),
5589 the detached data encoding was wrong and public keys obtained using
5590 X509_get_pubkey() weren't freed.
5593 *) Add text documentation for the BUFFER functions. Also added a work around
5594 to a Win95 console bug. This was triggered by the password read stuff: the
5595 last character typed gets carried over to the next fread(). If you were
5596 generating a new cert request using 'req' for example then the last
5597 character of the passphrase would be CR which would then enter the first
5601 *) Added the new `Includes OpenSSL Cryptography Software' button as
5602 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
5603 button and can be used by applications based on OpenSSL to show the
5604 relationship to the OpenSSL project.
5605 [Ralf S. Engelschall]
5607 *) Remove confusing variables in function signatures in files
5608 ssl/ssl_lib.c and ssl/ssl.h.
5609 [Lennart Bong <lob@kulthea.stacken.kth.se>]
5611 *) Don't install bss_file.c under PREFIX/include/
5612 [Lennart Bong <lob@kulthea.stacken.kth.se>]
5614 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
5615 functions that return function pointers and has support for NT specific
5616 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
5617 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
5618 unsigned to signed types: this was killing the Win32 compile.
5621 *) Add new certificate file to stack functions,
5622 SSL_add_dir_cert_subjects_to_stack() and
5623 SSL_add_file_cert_subjects_to_stack(). These largely supplant
5624 SSL_load_client_CA_file(), and can be used to add multiple certs easily
5625 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
5626 This means that Apache-SSL and similar packages don't have to mess around
5627 to add as many CAs as they want to the preferred list.
5630 *) Experiment with doxygen documentation. Currently only partially applied to
5632 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
5633 openssl.doxy as the configuration file.
5636 *) Get rid of remaining C++-style comments which strict C compilers hate.
5637 [Ralf S. Engelschall, pointed out by Carlos Amengual]
5639 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
5640 compiled in by default: it has problems with large keys.
5643 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
5644 DH private keys and/or callback functions which directly correspond to
5645 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
5646 is needed for applications which have to configure certificates on a
5647 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
5649 For the RSA certificate situation is makes no difference, but
5650 for the DSA certificate situation this fixes the "no shared cipher"
5651 problem where the OpenSSL cipher selection procedure failed because the
5652 temporary keys were not overtaken from the context and the API provided
5653 no way to reconfigure them.
5654 The new functions now let applications reconfigure the stuff and they
5655 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
5656 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
5657 non-public-API function ssl_cert_instantiate() is used as a helper
5658 function and also to reduce code redundancy inside ssl_rsa.c.
5659 [Ralf S. Engelschall]
5661 *) Move s_server -dcert and -dkey options out of the undocumented feature
5662 area because they are useful for the DSA situation and should be
5663 recognized by the users.
5664 [Ralf S. Engelschall]
5666 *) Fix the cipher decision scheme for export ciphers: the export bits are
5667 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
5668 SSL_EXP_MASK. So, the original variable has to be used instead of the
5669 already masked variable.
5670 [Richard Levitte <levitte@stacken.kth.se>]
5672 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
5673 [Richard Levitte <levitte@stacken.kth.se>]
5675 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
5676 from `int' to `unsigned int' because it's a length and initialized by
5677 EVP_DigestFinal() which expects an `unsigned int *'.
5678 [Richard Levitte <levitte@stacken.kth.se>]
5680 *) Don't hard-code path to Perl interpreter on shebang line of Configure
5681 script. Instead use the usual Shell->Perl transition trick.
5682 [Ralf S. Engelschall]
5684 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
5685 (in addition to RSA certificates) to match the behaviour of `openssl dsa
5686 -noout -modulus' as it's already the case for `openssl rsa -noout
5687 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
5688 currently the public key is printed (a decision which was already done by
5689 `openssl dsa -modulus' in the past) which serves a similar purpose.
5690 Additionally the NO_RSA no longer completely removes the whole -modulus
5691 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
5693 [Ralf S. Engelschall]
5695 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
5696 BIO. See the source (crypto/evp/bio_ok.c) for more info.
5697 [Arne Ansper <arne@ats.cyber.ee>]
5699 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
5700 to be added. Now both 'req' and 'ca' can use new objects defined in the
5704 *) Add cool BIO that does syslog (or event log on NT).
5705 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
5707 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
5708 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
5709 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
5710 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
5713 *) Add preliminary config info for new extension code.
5716 *) Make RSA_NO_PADDING really use no padding.
5717 [Ulf Moeller <ulf@fitug.de>]
5719 *) Generate errors when private/public key check is done.
5722 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
5723 for some CRL extensions and new objects added.
5726 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
5727 key usage extension and fuller support for authority key id.
5730 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
5731 padding method for RSA, which is recommended for new applications in PKCS
5732 #1 v2.0 (RFC 2437, October 1998).
5733 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
5734 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
5735 against Bleichbacher's attack on RSA.
5736 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
5739 *) Updates to the new SSL compression code
5740 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
5742 *) Fix so that the version number in the master secret, when passed
5743 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
5744 (because the server will not accept higher), that the version number
5745 is 0x03,0x01, not 0x03,0x00
5746 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
5748 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
5749 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
5750 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
5753 *) Support for RAW extensions where an arbitrary extension can be
5754 created by including its DER encoding. See apps/openssl.cnf for
5758 *) Make sure latest Perl versions don't interpret some generated C array
5759 code as Perl array code in the crypto/err/err_genc.pl script.
5760 [Lars Weber <3weber@informatik.uni-hamburg.de>]
5762 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
5763 not many people have the assembler. Various Win32 compilation fixes and
5764 update to the INSTALL.W32 file with (hopefully) more accurate Win32
5768 *) Modify configure script 'Configure' to automatically create crypto/date.h
5769 file under Win32 and also build pem.h from pem.org. New script
5770 util/mkfiles.pl to create the MINFO file on environments that can't do a
5771 'make files': perl util/mkfiles.pl >MINFO should work.
5774 *) Major rework of DES function declarations, in the pursuit of correctness
5775 and purity. As a result, many evil casts evaporated, and some weirdness,
5776 too. You may find this causes warnings in your code. Zapping your evil
5777 casts will probably fix them. Mostly.
5780 *) Fix for a typo in asn1.h. Bug fix to object creation script
5781 obj_dat.pl. It considered a zero in an object definition to mean
5782 "end of object": none of the objects in objects.h have any zeros
5783 so it wasn't spotted.
5784 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
5786 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
5787 Masking (CBCM). In the absence of test vectors, the best I have been able
5788 to do is check that the decrypt undoes the encrypt, so far. Send me test
5789 vectors if you have them.
5792 *) Correct calculation of key length for export ciphers (too much space was
5793 allocated for null ciphers). This has not been tested!
5796 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
5797 message is now correct (it understands "crypto" and "ssl" on its
5798 command line). There is also now an "update" option. This will update
5799 the util/ssleay.num and util/libeay.num files with any new functions.
5801 perl util/mkdef.pl crypto ssl update
5802 it will update them.
5805 *) Overhauled the Perl interface (perl/*):
5806 - ported BN stuff to OpenSSL's different BN library
5807 - made the perl/ source tree CVS-aware
5808 - renamed the package from SSLeay to OpenSSL (the files still contain
5809 their history because I've copied them in the repository)
5810 - removed obsolete files (the test scripts will be replaced
5811 by better Test::Harness variants in the future)
5812 [Ralf S. Engelschall]
5814 *) First cut for a very conservative source tree cleanup:
5815 1. merge various obsolete readme texts into doc/ssleay.txt
5816 where we collect the old documents and readme texts.
5817 2. remove the first part of files where I'm already sure that we no
5818 longer need them because of three reasons: either they are just temporary
5819 files which were left by Eric or they are preserved original files where
5820 I've verified that the diff is also available in the CVS via "cvs diff
5821 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
5822 the crypto/md/ stuff).
5823 [Ralf S. Engelschall]
5825 *) More extension code. Incomplete support for subject and issuer alt
5826 name, issuer and authority key id. Change the i2v function parameters
5827 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
5828 what that's for :-) Fix to ASN1 macro which messed up
5829 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
5832 *) Preliminary support for ENUMERATED type. This is largely copied from the
5836 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
5837 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
5839 *) Make sure `make rehash' target really finds the `openssl' program.
5840 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
5842 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
5843 like to hear about it if this slows down other processors.
5846 *) Add CygWin32 platform information to Configure script.
5847 [Alan Batie <batie@aahz.jf.intel.com>]
5849 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
5850 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
5852 *) New program nseq to manipulate netscape certificate sequences
5855 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
5859 *) Fixes to BN code. Previously the default was to define BN_RECURSION
5860 but the BN code had some problems that would cause failures when
5861 doing certificate verification and some other functions.
5862 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
5864 *) Add ASN1 and PEM code to support netscape certificate sequences.
5867 *) Add ASN1 and PEM code to support netscape certificate sequences.
5870 *) Add several PKIX and private extended key usage OIDs.
5873 *) Modify the 'ca' program to handle the new extension code. Modify
5874 openssl.cnf for new extension format, add comments.
5877 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
5878 and add a sample to openssl.cnf so req -x509 now adds appropriate
5882 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
5883 error code, add initial support to X509_print() and x509 application.
5886 *) Takes a deep breath and start addding X509 V3 extension support code. Add
5887 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
5888 stuff is currently isolated and isn't even compiled yet.
5891 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
5892 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
5893 Removed the versions check from X509 routines when loading extensions:
5894 this allows certain broken certificates that don't set the version
5895 properly to be processed.
5898 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
5899 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
5900 can still be regenerated with "make depend".
5903 *) Spelling mistake in C version of CAST-128.
5904 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
5906 *) Changes to the error generation code. The perl script err-code.pl
5907 now reads in the old error codes and retains the old numbers, only
5908 adding new ones if necessary. It also only changes the .err files if new
5909 codes are added. The makefiles have been modified to only insert errors
5910 when needed (to avoid needlessly modifying header files). This is done
5911 by only inserting errors if the .err file is newer than the auto generated
5912 C file. To rebuild all the error codes from scratch (the old behaviour)
5913 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
5914 or delete all the .err files.
5917 *) CAST-128 was incorrectly implemented for short keys. The C version has
5918 been fixed, but is untested. The assembler versions are also fixed, but
5919 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
5920 to regenerate it if needed.
5921 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
5922 Hagino <itojun@kame.net>]
5924 *) File was opened incorrectly in randfile.c.
5925 [Ulf Möller <ulf@fitug.de>]
5927 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
5928 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
5929 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
5930 al: it's just almost always a UTCTime. Note this patch adds new error
5931 codes so do a "make errors" if there are problems.
5934 *) Correct Linux 1 recognition in config.
5935 [Ulf Möller <ulf@fitug.de>]
5937 *) Remove pointless MD5 hash when using DSA keys in ca.
5938 [Anonymous <nobody@replay.com>]
5940 *) Generate an error if given an empty string as a cert directory. Also
5941 generate an error if handed NULL (previously returned 0 to indicate an
5942 error, but didn't set one).
5943 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
5945 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
5948 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
5949 parameters. This was causing a warning which killed off the Win32 compile.
5952 *) Remove C++ style comments from crypto/bn/bn_local.h.
5953 [Neil Costigan <neil.costigan@celocom.com>]
5955 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
5956 based on a text string, looking up short and long names and finally
5957 "dot" format. The "dot" format stuff didn't work. Added new function
5958 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
5959 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
5960 OID is not part of the table.
5963 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
5964 X509_LOOKUP_by_alias().
5967 *) Sort openssl functions by name.
5970 *) Get the gendsa program working (hopefully) and add it to app list. Remove
5971 encryption from sample DSA keys (in case anyone is interested the password
5975 *) Make _all_ *_free functions accept a NULL pointer.
5976 [Frans Heymans <fheymans@isaserver.be>]
5978 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
5980 [Anonymous <nobody@replay.com>]
5982 *) s_server should send the CAfile as acceptable CAs, not its own cert.
5983 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
5985 *) Don't blow it for numeric -newkey arguments to apps/req.
5986 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
5988 *) Temp key "for export" tests were wrong in s3_srvr.c.
5989 [Anonymous <nobody@replay.com>]
5991 *) Add prototype for temp key callback functions
5992 SSL_CTX_set_tmp_{rsa,dh}_callback().
5995 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
5996 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
5999 *) X509_name_add_entry() freed the wrong thing after an error.
6000 [Arne Ansper <arne@ats.cyber.ee>]
6002 *) rsa_eay.c would attempt to free a NULL context.
6003 [Arne Ansper <arne@ats.cyber.ee>]
6005 *) BIO_s_socket() had a broken should_retry() on Windoze.
6006 [Arne Ansper <arne@ats.cyber.ee>]
6008 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
6009 [Arne Ansper <arne@ats.cyber.ee>]
6011 *) Make sure the already existing X509_STORE->depth variable is initialized
6012 in X509_STORE_new(), but document the fact that this variable is still
6013 unused in the certificate verification process.
6014 [Ralf S. Engelschall]
6016 *) Fix the various library and apps files to free up pkeys obtained from
6017 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
6020 *) Fix reference counting in X509_PUBKEY_get(). This makes
6021 demos/maurice/example2.c work, amongst others, probably.
6022 [Steve Henson and Ben Laurie]
6024 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
6025 `openssl' and second, the shortcut symlinks for the `openssl <command>'
6026 are no longer created. This way we have a single and consistent command
6027 line interface `openssl <command>', similar to `cvs <command>'.
6028 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
6030 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
6031 BIT STRING wrapper always have zero unused bits.
6034 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
6037 *) Make the top-level INSTALL documentation easier to understand.
6040 *) Makefiles updated to exit if an error occurs in a sub-directory
6041 make (including if user presses ^C) [Paul Sutton]
6043 *) Make Montgomery context stuff explicit in RSA data structure.
6046 *) Fix build order of pem and err to allow for generated pem.h.
6049 *) Fix renumbering bug in X509_NAME_delete_entry().
6052 *) Enhanced the err-ins.pl script so it makes the error library number
6053 global and can add a library name. This is needed for external ASN1 and
6054 other error libraries.
6057 *) Fixed sk_insert which never worked properly.
6060 *) Fix ASN1 macros so they can handle indefinite length construted
6061 EXPLICIT tags. Some non standard certificates use these: they can now
6065 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
6066 into a single doc/ssleay.txt bundle. This way the information is still
6067 preserved but no longer messes up this directory. Now it's new room for
6068 the new set of documenation files.
6069 [Ralf S. Engelschall]
6071 *) SETs were incorrectly DER encoded. This was a major pain, because they
6072 shared code with SEQUENCEs, which aren't coded the same. This means that
6073 almost everything to do with SETs or SEQUENCEs has either changed name or
6074 number of arguments.
6075 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
6077 *) Fix test data to work with the above.
6080 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
6081 was already fixed by Eric for 0.9.1 it seems.
6082 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
6084 *) Autodetect FreeBSD3.
6087 *) Fix various bugs in Configure. This affects the following platforms:
6091 unixware-2.0-pentium
6095 *) Eliminate generated files from CVS. Reorder tests to regenerate files
6096 before they are needed.
6099 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
6103 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
6105 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
6106 changed SSLeay to OpenSSL in version strings.
6107 [Ralf S. Engelschall]
6109 *) Some fixups to the top-level documents.
6112 *) Fixed the nasty bug where rsaref.h was not found under compile-time
6113 because the symlink to include/ was missing.
6114 [Ralf S. Engelschall]
6116 *) Incorporated the popular no-RSA/DSA-only patches
6117 which allow to compile a RSA-free SSLeay.
6118 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
6120 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
6121 when "ssleay" is still not found.
6122 [Ralf S. Engelschall]
6124 *) Added more platforms to Configure: Cray T3E, HPUX 11,
6125 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
6127 *) Updated the README file.
6128 [Ralf S. Engelschall]
6130 *) Added various .cvsignore files in the CVS repository subdirs
6131 to make a "cvs update" really silent.
6132 [Ralf S. Engelschall]
6134 *) Recompiled the error-definition header files and added
6135 missing symbols to the Win32 linker tables.
6136 [Ralf S. Engelschall]
6138 *) Cleaned up the top-level documents;
6139 o new files: CHANGES and LICENSE
6140 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
6141 o merged COPYRIGHT into LICENSE
6142 o removed obsolete TODO file
6143 o renamed MICROSOFT to INSTALL.W32
6144 [Ralf S. Engelschall]
6146 *) Removed dummy files from the 0.9.1b source tree:
6147 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
6148 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
6149 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
6150 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
6151 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
6152 [Ralf S. Engelschall]
6154 *) Added various platform portability fixes.
6157 *) The Genesis of the OpenSSL rpject:
6158 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
6159 Young and Tim J. Hudson created while they were working for C2Net until
6161 [The OpenSSL Project]
6164 Changes between 0.9.0b and 0.9.1b [not released]
6166 *) Updated a few CA certificates under certs/
6169 *) Changed some BIGNUM api stuff.
6172 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
6173 DGUX x86, Linux Alpha, etc.
6176 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
6177 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
6181 *) Add -strparse option to asn1pars program which parses nested
6183 [Dr Stephen Henson <shenson@bigfoot.com>]
6185 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
6188 *) DSA fix for "ca" program.
6191 *) Added "-genkey" option to "dsaparam" program.
6194 *) Added RIPE MD160 (rmd160) message digest.
6197 *) Added -a (all) option to "ssleay version" command.
6200 *) Added PLATFORM define which is the id given to Configure.
6203 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
6206 *) Extended the ASN.1 parser routines.
6209 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
6212 *) Added a BN_CTX to the BN library.
6215 *) Fixed the weak key values in DES library
6218 *) Changed API in EVP library for cipher aliases.
6221 *) Added support for RC2/64bit cipher.
6224 *) Converted the lhash library to the crypto/mem.c functions.
6227 *) Added more recognized ASN.1 object ids.
6230 *) Added more RSA padding checks for SSL/TLS.
6233 *) Added BIO proxy/filter functionality.
6236 *) Added extra_certs to SSL_CTX which can be used
6237 send extra CA certificates to the client in the CA cert chain sending
6238 process. It can be configured with SSL_CTX_add_extra_chain_cert().
6241 *) Now Fortezza is denied in the authentication phase because
6242 this is key exchange mechanism is not supported by SSLeay at all.
6245 *) Additional PKCS1 checks.
6248 *) Support the string "TLSv1" for all TLS v1 ciphers.
6251 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
6252 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
6255 *) Fixed a few memory leaks.
6258 *) Fixed various code and comment typos.
6261 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
6262 bytes sent in the client random.
6263 [Edward Bishop <ebishop@spyglass.com>]
projects / oweals / openssl.git / blob