5 Changes between 0.9.8d and 0.9.8e [XX xxx XXXX]
7 Changes between 0.9.8c and 0.9.8d [28 Sep 2006]
9 *) Introduce limits to prevent malicious keys being able to
10 cause a denial of service. (CVE-2006-2940)
11 [Steve Henson, Bodo Moeller]
13 *) Fix ASN.1 parsing of certain invalid structures that can result
14 in a denial of service. (CVE-2006-2937) [Steve Henson]
16 *) Fix buffer overflow in SSL_get_shared_ciphers() function.
17 (CVE-2006-3738) [Tavis Ormandy and Will Drewry, Google Security Team]
19 *) Fix SSL client code which could crash if connecting to a
20 malicious SSLv2 server. (CVE-2006-4343)
21 [Tavis Ormandy and Will Drewry, Google Security Team]
23 *) Since 0.9.8b, ciphersuite strings naming explicit ciphersuites
24 match only those. Before that, "AES256-SHA" would be interpreted
25 as a pattern and match "AES128-SHA" too (since AES128-SHA got
26 the same strength classification in 0.9.7h) as we currently only
27 have a single AES bit in the ciphersuite description bitmap.
28 That change, however, also applied to ciphersuite strings such as
29 "RC4-MD5" that intentionally matched multiple ciphersuites --
30 namely, SSL 2.0 ciphersuites in addition to the more common ones
33 So we change the selection algorithm again: Naming an explicit
34 ciphersuite selects this one ciphersuite, and any other similar
35 ciphersuite (same bitmap) from *other* protocol versions.
36 Thus, "RC4-MD5" again will properly select both the SSL 2.0
37 ciphersuite and the SSL 3.0/TLS 1.0 ciphersuite.
39 Since SSL 2.0 does not have any ciphersuites for which the
40 128/256 bit distinction would be relevant, this works for now.
41 The proper fix will be to use different bits for AES128 and
42 AES256, which would have avoided the problems from the beginning;
43 however, bits are scarce, so we can only do this in a new release
44 (not just a patchlevel) when we can change the SSL_CIPHER
45 definition to split the single 'unsigned long mask' bitmap into
46 multiple values to extend the available space.
50 Changes between 0.9.8b and 0.9.8c [05 Sep 2006]
52 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
53 (CVE-2006-4339) [Ben Laurie and Google Security Team]
55 *) Add AES IGE and biIGE modes.
58 *) Change the Unix randomness entropy gathering to use poll() when
59 possible instead of select(), since the latter has some
60 undesirable limitations.
61 [Darryl Miles via Richard Levitte and Bodo Moeller]
63 *) Disable "ECCdraft" ciphersuites more thoroughly. Now special
64 treatment in ssl/ssl_ciph.s makes sure that these ciphersuites
65 cannot be implicitly activated as part of, e.g., the "AES" alias.
66 However, please upgrade to OpenSSL 0.9.9[-dev] for
67 non-experimental use of the ECC ciphersuites to get TLS extension
68 support, which is required for curve and point format negotiation
69 to avoid potential handshake problems.
72 *) Disable rogue ciphersuites:
74 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
75 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
76 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
78 The latter two were purportedly from
79 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
82 Also deactive the remaining ciphersuites from
83 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
84 unofficial, and the ID has long expired.
87 *) Fix RSA blinding Heisenbug (problems sometimes occured on
88 dual-core machines) and other potential thread-safety issues.
91 *) Add the symmetric cipher Camellia (128-bit, 192-bit, 256-bit key
92 versions), which is now available for royalty-free use
93 (see http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html).
94 Also, add Camellia TLS ciphersuites from RFC 4132.
96 To minimize changes between patchlevels in the OpenSSL 0.9.8
97 series, Camellia remains excluded from compilation unless OpenSSL
98 is configured with 'enable-camellia'.
101 *) Disable the padding bug check when compression is in use. The padding
102 bug check assumes the first packet is of even length, this is not
103 necessarily true if compresssion is enabled and can result in false
104 positives causing handshake failure. The actual bug test is ancient
105 code so it is hoped that implementations will either have fixed it by
106 now or any which still have the bug do not support compression.
109 Changes between 0.9.8a and 0.9.8b [04 May 2006]
111 *) When applying a cipher rule check to see if string match is an explicit
112 cipher suite and only match that one cipher suite if it is.
115 *) Link in manifests for VC++ if needed.
116 [Austin Ziegler <halostatue@gmail.com>]
118 *) Update support for ECC-based TLS ciphersuites according to
119 draft-ietf-tls-ecc-12.txt with proposed changes (but without
120 TLS extensions, which are supported starting with the 0.9.9
121 branch, not in the OpenSSL 0.9.8 branch).
124 *) New functions EVP_CIPHER_CTX_new() and EVP_CIPHER_CTX_free() to support
125 opaque EVP_CIPHER_CTX handling.
128 *) Fixes and enhancements to zlib compression code. We now only use
129 "zlib1.dll" and use the default __cdecl calling convention on Win32
130 to conform with the standards mentioned here:
131 http://www.zlib.net/DLL_FAQ.txt
132 Static zlib linking now works on Windows and the new --with-zlib-include
133 --with-zlib-lib options to Configure can be used to supply the location
134 of the headers and library. Gracefully handle case where zlib library
138 *) Several fixes and enhancements to the OID generation code. The old code
139 sometimes allowed invalid OIDs (1.X for X >= 40 for example), couldn't
140 handle numbers larger than ULONG_MAX, truncated printing and had a
141 non standard OBJ_obj2txt() behaviour.
144 *) Add support for building of engines under engine/ as shared libraries
145 under VC++ build system.
148 *) Corrected the numerous bugs in the Win32 path splitter in DSO.
149 Hopefully, we will not see any false combination of paths any more.
152 Changes between 0.9.8 and 0.9.8a [11 Oct 2005]
154 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
155 (part of SSL_OP_ALL). This option used to disable the
156 countermeasure against man-in-the-middle protocol-version
157 rollback in the SSL 2.0 server implementation, which is a bad
158 idea. (CVE-2005-2969)
160 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
161 for Information Security, National Institute of Advanced Industrial
162 Science and Technology [AIST], Japan)]
164 *) Add two function to clear and return the verify parameter flags.
167 *) Keep cipherlists sorted in the source instead of sorting them at
168 runtime, thus removing the need for a lock.
171 *) Avoid some small subgroup attacks in Diffie-Hellman.
172 [Nick Mathewson and Ben Laurie]
174 *) Add functions for well-known primes.
177 *) Extended Windows CE support.
178 [Satoshi Nakamura and Andy Polyakov]
180 *) Initialize SSL_METHOD structures at compile time instead of during
181 runtime, thus removing the need for a lock.
184 *) Make PKCS7_decrypt() work even if no certificate is supplied by
185 attempting to decrypt each encrypted key in turn. Add support to
189 Changes between 0.9.7h and 0.9.8 [05 Jul 2005]
191 [NB: OpenSSL 0.9.7i and later 0.9.7 patch levels were released after
194 *) Add libcrypto.pc and libssl.pc for those who feel they need them.
197 *) Change CA.sh and CA.pl so they don't bundle the CSR and the private
198 key into the same file any more.
201 *) Add initial support for Win64, both IA64 and AMD64/x64 flavors.
204 *) Add -utf8 command line and config file option to 'ca'.
205 [Stefan <stf@udoma.org]
207 *) Removed the macro des_crypt(), as it seems to conflict with some
208 libraries. Use DES_crypt().
211 *) Correct naming of the 'chil' and '4758cca' ENGINEs. This
212 involves renaming the source and generated shared-libs for
213 both. The engines will accept the corrected or legacy ids
214 ('ncipher' and '4758_cca' respectively) when binding. NB,
215 this only applies when building 'shared'.
216 [Corinna Vinschen <vinschen@redhat.com> and Geoff Thorpe]
218 *) Add attribute functions to EVP_PKEY structure. Modify
219 PKCS12_create() to recognize a CSP name attribute and
220 use it. Make -CSP option work again in pkcs12 utility.
223 *) Add new functionality to the bn blinding code:
224 - automatic re-creation of the BN_BLINDING parameters after
225 a fixed number of uses (currently 32)
226 - add new function for parameter creation
227 - introduce flags to control the update behaviour of the
228 BN_BLINDING parameters
229 - hide BN_BLINDING structure
230 Add a second BN_BLINDING slot to the RSA structure to improve
231 performance when a single RSA object is shared among several
235 *) Add support for DTLS.
236 [Nagendra Modadugu <nagendra@cs.stanford.edu> and Ben Laurie]
238 *) Add support for DER encoded private keys (SSL_FILETYPE_ASN1)
239 to SSL_CTX_use_PrivateKey_file() and SSL_use_PrivateKey_file()
242 *) Remove buggy and incompletet DH cert support from
243 ssl/ssl_rsa.c and ssl/s3_both.c
246 *) Use SHA-1 instead of MD5 as the default digest algorithm for
247 the apps/openssl applications.
250 *) Compile clean with "-Wall -Wmissing-prototypes
251 -Wstrict-prototypes -Wmissing-declarations -Werror". Currently
252 DEBUG_SAFESTACK must also be set.
255 *) Change ./Configure so that certain algorithms can be disabled by default.
256 The new counterpiece to "no-xxx" is "enable-xxx".
258 The patented RC5 and MDC2 algorithms will now be disabled unless
259 "enable-rc5" and "enable-mdc2", respectively, are specified.
261 (IDEA remains enabled despite being patented. This is because IDEA
262 is frequently required for interoperability, and there is no license
263 fee for non-commercial use. As before, "no-idea" can be used to
264 avoid this algorithm.)
268 *) Add processing of proxy certificates (see RFC 3820). This work was
269 sponsored by KTH (The Royal Institute of Technology in Stockholm) and
270 EGEE (Enabling Grids for E-science in Europe).
273 *) RC4 performance overhaul on modern architectures/implementations, such
274 as Intel P4, IA-64 and AMD64.
277 *) New utility extract-section.pl. This can be used specify an alternative
278 section number in a pod file instead of having to treat each file as
279 a separate case in Makefile. This can be done by adding two lines to the
282 =for comment openssl_section:XXX
284 The blank line is mandatory.
288 *) New arguments -certform, -keyform and -pass for s_client and s_server
289 to allow alternative format key and certificate files and passphrase
293 *) New structure X509_VERIFY_PARAM which combines current verify parameters,
294 update associated structures and add various utility functions.
296 Add new policy related verify parameters, include policy checking in
297 standard verify code. Enhance 'smime' application with extra parameters
298 to support policy checking and print out.
301 *) Add a new engine to support VIA PadLock ACE extensions in the VIA C3
302 Nehemiah processors. These extensions support AES encryption in hardware
303 as well as RNG (though RNG support is currently disabled).
304 [Michal Ludvig <michal@logix.cz>, with help from Andy Polyakov]
306 *) Deprecate BN_[get|set]_params() functions (they were ignored internally).
309 *) New FIPS 180-2 algorithms, SHA-224/-256/-384/-512 are implemented.
310 [Andy Polyakov and a number of other people]
312 *) Improved PowerPC platform support. Most notably BIGNUM assembler
313 implementation contributed by IBM.
314 [Suresh Chari, Peter Waltenberg, Andy Polyakov]
316 *) The new 'RSA_generate_key_ex' function now takes a BIGNUM for the public
317 exponent rather than 'unsigned long'. There is a corresponding change to
318 the new 'rsa_keygen' element of the RSA_METHOD structure.
319 [Jelte Jansen, Geoff Thorpe]
321 *) Functionality for creating the initial serial number file is now
322 moved from CA.pl to the 'ca' utility with a new option -create_serial.
324 (Before OpenSSL 0.9.7e, CA.pl used to initialize the serial
325 number file to 1, which is bound to cause problems. To avoid
326 the problems while respecting compatibility between different 0.9.7
327 patchlevels, 0.9.7e employed 'openssl x509 -next_serial' in
328 CA.pl for serial number initialization. With the new release 0.9.8,
329 we can fix the problem directly in the 'ca' utility.)
332 *) Reduced header interdepencies by declaring more opaque objects in
333 ossl_typ.h. As a consequence, including some headers (eg. engine.h) will
334 give fewer recursive includes, which could break lazy source code - so
335 this change is covered by the OPENSSL_NO_DEPRECATED symbol. As always,
336 developers should define this symbol when building and using openssl to
337 ensure they track the recommended behaviour, interfaces, [etc], but
338 backwards-compatible behaviour prevails when this isn't defined.
341 *) New function X509_POLICY_NODE_print() which prints out policy nodes.
344 *) Add new EVP function EVP_CIPHER_CTX_rand_key and associated functionality.
345 This will generate a random key of the appropriate length based on the
346 cipher context. The EVP_CIPHER can provide its own random key generation
347 routine to support keys of a specific form. This is used in the des and
348 3des routines to generate a key of the correct parity. Update S/MIME
349 code to use new functions and hence generate correct parity DES keys.
350 Add EVP_CHECK_DES_KEY #define to return an error if the key is not
351 valid (weak or incorrect parity).
354 *) Add a local set of CRLs that can be used by X509_verify_cert() as well
355 as looking them up. This is useful when the verified structure may contain
356 CRLs, for example PKCS#7 signedData. Modify PKCS7_verify() to use any CRLs
357 present unless the new PKCS7_NO_CRL flag is asserted.
360 *) Extend ASN1 oid configuration module. It now additionally accepts the
363 shortName = some long name, 1.2.3.4
366 *) Reimplemented the BN_CTX implementation. There is now no more static
367 limitation on the number of variables it can handle nor the depth of the
368 "stack" handling for BN_CTX_start()/BN_CTX_end() pairs. The stack
369 information can now expand as required, and rather than having a single
370 static array of bignums, BN_CTX now uses a linked-list of such arrays
371 allowing it to expand on demand whilst maintaining the usefulness of
375 *) Add a missing BN_CTX parameter to the 'rsa_mod_exp' callback in RSA_METHOD
376 to allow all RSA operations to function using a single BN_CTX.
379 *) Preliminary support for certificate policy evaluation and checking. This
380 is initially intended to pass the tests outlined in "Conformance Testing
381 of Relying Party Client Certificate Path Processing Logic" v1.07.
384 *) bn_dup_expand() has been deprecated, it was introduced in 0.9.7 and
385 remained unused and not that useful. A variety of other little bignum
386 tweaks and fixes have also been made continuing on from the audit (see
390 *) Constify all or almost all d2i, c2i, s2i and r2i functions, along with
391 associated ASN1, EVP and SSL functions and old ASN1 macros.
394 *) BN_zero() only needs to set 'top' and 'neg' to zero for correct results,
395 and this should never fail. So the return value from the use of
396 BN_set_word() (which can fail due to needless expansion) is now deprecated;
397 if OPENSSL_NO_DEPRECATED is defined, BN_zero() is a void macro.
400 *) BN_CTX_get() should return zero-valued bignums, providing the same
401 initialised value as BN_new().
402 [Geoff Thorpe, suggested by Ulf Möller]
404 *) Support for inhibitAnyPolicy certificate extension.
407 *) An audit of the BIGNUM code is underway, for which debugging code is
408 enabled when BN_DEBUG is defined. This makes stricter enforcements on what
409 is considered valid when processing BIGNUMs, and causes execution to
410 assert() when a problem is discovered. If BN_DEBUG_RAND is defined,
411 further steps are taken to deliberately pollute unused data in BIGNUM
412 structures to try and expose faulty code further on. For now, openssl will
413 (in its default mode of operation) continue to tolerate the inconsistent
414 forms that it has tolerated in the past, but authors and packagers should
415 consider trying openssl and their own applications when compiled with
416 these debugging symbols defined. It will help highlight potential bugs in
417 their own code, and will improve the test coverage for OpenSSL itself. At
418 some point, these tighter rules will become openssl's default to improve
419 maintainability, though the assert()s and other overheads will remain only
420 in debugging configurations. See bn.h for more details.
421 [Geoff Thorpe, Nils Larsch, Ulf Möller]
423 *) BN_CTX_init() has been deprecated, as BN_CTX is an opaque structure
424 that can only be obtained through BN_CTX_new() (which implicitly
425 initialises it). The presence of this function only made it possible
426 to overwrite an existing structure (and cause memory leaks).
429 *) Because of the callback-based approach for implementing LHASH as a
430 template type, lh_insert() adds opaque objects to hash-tables and
431 lh_doall() or lh_doall_arg() are typically used with a destructor callback
432 to clean up those corresponding objects before destroying the hash table
433 (and losing the object pointers). So some over-zealous constifications in
434 LHASH have been relaxed so that lh_insert() does not take (nor store) the
435 objects as "const" and the lh_doall[_arg] callback wrappers are not
436 prototyped to have "const" restrictions on the object pointers they are
437 given (and so aren't required to cast them away any more).
440 *) The tmdiff.h API was so ugly and minimal that our own timing utility
441 (speed) prefers to use its own implementation. The two implementations
442 haven't been consolidated as yet (volunteers?) but the tmdiff API has had
443 its object type properly exposed (MS_TM) instead of casting to/from "char
444 *". This may still change yet if someone realises MS_TM and "ms_time_***"
445 aren't necessarily the greatest nomenclatures - but this is what was used
446 internally to the implementation so I've used that for now.
449 *) Ensure that deprecated functions do not get compiled when
450 OPENSSL_NO_DEPRECATED is defined. Some "openssl" subcommands and a few of
451 the self-tests were still using deprecated key-generation functions so
452 these have been updated also.
455 *) Reorganise PKCS#7 code to separate the digest location functionality
456 into PKCS7_find_digest(), digest addtion into PKCS7_bio_add_digest().
457 New function PKCS7_set_digest() to set the digest type for PKCS#7
458 digestedData type. Add additional code to correctly generate the
459 digestedData type and add support for this type in PKCS7 initialization
463 *) New function PKCS7_set0_type_other() this initializes a PKCS7
464 structure of type "other".
467 *) Fix prime generation loop in crypto/bn/bn_prime.pl by making
468 sure the loop does correctly stop and breaking ("division by zero")
469 modulus operations are not performed. The (pre-generated) prime
470 table crypto/bn/bn_prime.h was already correct, but it could not be
471 re-generated on some platforms because of the "division by zero"
472 situation in the script.
473 [Ralf S. Engelschall]
475 *) Update support for ECC-based TLS ciphersuites according to
476 draft-ietf-tls-ecc-03.txt: the KDF1 key derivation function with
477 SHA-1 now is only used for "small" curves (where the
478 representation of a field element takes up to 24 bytes); for
479 larger curves, the field element resulting from ECDH is directly
480 used as premaster secret.
481 [Douglas Stebila (Sun Microsystems Laboratories)]
483 *) Add code for kP+lQ timings to crypto/ec/ectest.c, and add SEC2
484 curve secp160r1 to the tests.
485 [Douglas Stebila (Sun Microsystems Laboratories)]
487 *) Add the possibility to load symbols globally with DSO.
488 [Götz Babin-Ebell <babin-ebell@trustcenter.de> via Richard Levitte]
490 *) Add the functions ERR_set_mark() and ERR_pop_to_mark() for better
491 control of the error stack.
494 *) Add support for STORE in ENGINE.
497 *) Add the STORE type. The intention is to provide a common interface
498 to certificate and key stores, be they simple file-based stores, or
499 HSM-type store, or LDAP stores, or...
500 NOTE: The code is currently UNTESTED and isn't really used anywhere.
503 *) Add a generic structure called OPENSSL_ITEM. This can be used to
504 pass a list of arguments to any function as well as provide a way
505 for a function to pass data back to the caller.
508 *) Add the functions BUF_strndup() and BUF_memdup(). BUF_strndup()
509 works like BUF_strdup() but can be used to duplicate a portion of
510 a string. The copy gets NUL-terminated. BUF_memdup() duplicates
514 *) Add the function sk_find_ex() which works like sk_find(), but will
515 return an index to an element even if an exact match couldn't be
516 found. The index is guaranteed to point at the element where the
517 searched-for key would be inserted to preserve sorting order.
520 *) Add the function OBJ_bsearch_ex() which works like OBJ_bsearch() but
521 takes an extra flags argument for optional functionality. Currently,
522 the following flags are defined:
524 OBJ_BSEARCH_VALUE_ON_NOMATCH
525 This one gets OBJ_bsearch_ex() to return a pointer to the first
526 element where the comparing function returns a negative or zero
529 OBJ_BSEARCH_FIRST_VALUE_ON_MATCH
530 This one gets OBJ_bsearch_ex() to return a pointer to the first
531 element where the comparing function returns zero. This is useful
532 if there are more than one element where the comparing function
536 *) Make it possible to create self-signed certificates with 'openssl ca'
537 in such a way that the self-signed certificate becomes part of the
538 CA database and uses the same mechanisms for serial number generation
539 as all other certificate signing. The new flag '-selfsign' enables
540 this functionality. Adapt CA.sh and CA.pl.in.
543 *) Add functionality to check the public key of a certificate request
544 against a given private. This is useful to check that a certificate
545 request can be signed by that key (self-signing).
548 *) Make it possible to have multiple active certificates with the same
549 subject in the CA index file. This is done only if the keyword
550 'unique_subject' is set to 'no' in the main CA section (default
551 if 'CA_default') of the configuration file. The value is saved
552 with the database itself in a separate index attribute file,
553 named like the index file with '.attr' appended to the name.
556 *) Generate muti valued AVAs using '+' notation in config files for
560 *) Support for nameConstraints certificate extension.
563 *) Support for policyConstraints certificate extension.
566 *) Support for policyMappings certificate extension.
569 *) Make sure the default DSA_METHOD implementation only uses its
570 dsa_mod_exp() and/or bn_mod_exp() handlers if they are non-NULL,
571 and change its own handlers to be NULL so as to remove unnecessary
572 indirection. This lets alternative implementations fallback to the
573 default implementation more easily.
576 *) Support for directoryName in GeneralName related extensions
580 *) Make it possible to link applications using Makefile.shared.
581 Make that possible even when linking against static libraries!
584 *) Support for single pass processing for S/MIME signing. This now
585 means that S/MIME signing can be done from a pipe, in addition
586 cleartext signing (multipart/signed type) is effectively streaming
587 and the signed data does not need to be all held in memory.
589 This is done with a new flag PKCS7_STREAM. When this flag is set
590 PKCS7_sign() only initializes the PKCS7 structure and the actual signing
591 is done after the data is output (and digests calculated) in
595 *) Add full support for -rpath/-R, both in shared libraries and
596 applications, at least on the platforms where it's known how
600 *) In crypto/ec/ec_mult.c, implement fast point multiplication with
601 precomputation, based on wNAF splitting: EC_GROUP_precompute_mult()
602 will now compute a table of multiples of the generator that
603 makes subsequent invocations of EC_POINTs_mul() or EC_POINT_mul()
604 faster (notably in the case of a single point multiplication,
606 [Nils Larsch, Bodo Moeller]
608 *) IPv6 support for certificate extensions. The various extensions
609 which use the IP:a.b.c.d can now take IPv6 addresses using the
610 formats of RFC1884 2.2 . IPv6 addresses are now also displayed
614 *) Added an ENGINE that implements RSA by performing private key
615 exponentiations with the GMP library. The conversions to and from
616 GMP's mpz_t format aren't optimised nor are any montgomery forms
617 cached, and on x86 it appears OpenSSL's own performance has caught up.
618 However there are likely to be other architectures where GMP could
619 provide a boost. This ENGINE is not built in by default, but it can be
620 specified at Configure time and should be accompanied by the necessary
621 linker additions, eg;
622 ./config -DOPENSSL_USE_GMP -lgmp
625 *) "openssl engine" will not display ENGINE/DSO load failure errors when
626 testing availability of engines with "-t" - the old behaviour is
627 produced by increasing the feature's verbosity with "-tt".
630 *) ECDSA routines: under certain error conditions uninitialized BN objects
631 could be freed. Solution: make sure initialization is performed early
632 enough. (Reported and fix supplied by Nils Larsch <nla@trustcenter.de>
636 *) Key-generation can now be implemented in RSA_METHOD, DSA_METHOD
637 and DH_METHOD (eg. by ENGINE implementations) to override the normal
638 software implementations. For DSA and DH, parameter generation can
639 also be overriden by providing the appropriate method callbacks.
642 *) Change the "progress" mechanism used in key-generation and
643 primality testing to functions that take a new BN_GENCB pointer in
644 place of callback/argument pairs. The new API functions have "_ex"
645 postfixes and the older functions are reimplemented as wrappers for
646 the new ones. The OPENSSL_NO_DEPRECATED symbol can be used to hide
647 declarations of the old functions to help (graceful) attempts to
648 migrate to the new functions. Also, the new key-generation API
649 functions operate on a caller-supplied key-structure and return
650 success/failure rather than returning a key or NULL - this is to
651 help make "keygen" another member function of RSA_METHOD etc.
653 Example for using the new callback interface:
655 int (*my_callback)(int a, int b, BN_GENCB *cb) = ...;
659 BN_GENCB_set(&my_cb, my_callback, my_arg);
661 return BN_is_prime_ex(some_bignum, BN_prime_checks, NULL, &cb);
662 /* For the meaning of a, b in calls to my_callback(), see the
663 * documentation of the function that calls the callback.
664 * cb will point to my_cb; my_arg can be retrieved as cb->arg.
665 * my_callback should return 1 if it wants BN_is_prime_ex()
666 * to continue, or 0 to stop.
671 *) Change the ZLIB compression method to be stateful, and make it
672 available to TLS with the number defined in
673 draft-ietf-tls-compression-04.txt.
676 *) Add the ASN.1 structures and functions for CertificatePair, which
677 is defined as follows (according to X.509_4thEditionDraftV6.pdf):
679 CertificatePair ::= SEQUENCE {
680 forward [0] Certificate OPTIONAL,
681 reverse [1] Certificate OPTIONAL,
682 -- at least one of the pair shall be present -- }
684 Also implement the PEM functions to read and write certificate
685 pairs, and defined the PEM tag as "CERTIFICATE PAIR".
687 This needed to be defined, mostly for the sake of the LDAP
688 attribute crossCertificatePair, but may prove useful elsewhere as
692 *) Make it possible to inhibit symlinking of shared libraries in
693 Makefile.shared, for Cygwin's sake.
696 *) Extend the BIGNUM API by creating a function
697 void BN_set_negative(BIGNUM *a, int neg);
698 and a macro that behave like
699 int BN_is_negative(const BIGNUM *a);
701 to avoid the need to access 'a->neg' directly in applications.
704 *) Implement fast modular reduction for pseudo-Mersenne primes
705 used in NIST curves (crypto/bn/bn_nist.c, crypto/ec/ecp_nist.c).
706 EC_GROUP_new_curve_GFp() will now automatically use this
708 [Nils Larsch <nla@trustcenter.de>]
710 *) Add new lock type (CRYPTO_LOCK_BN).
713 *) Change the ENGINE framework to automatically load engines
714 dynamically from specific directories unless they could be
715 found to already be built in or loaded. Move all the
716 current engines except for the cryptodev one to a new
718 The engines in engines/ are built as shared libraries if
719 the "shared" options was given to ./Configure or ./config.
720 Otherwise, they are inserted in libcrypto.a.
721 /usr/local/ssl/engines is the default directory for dynamic
722 engines, but that can be overriden at configure time through
723 the usual use of --prefix and/or --openssldir, and at run
724 time with the environment variable OPENSSL_ENGINES.
725 [Geoff Thorpe and Richard Levitte]
727 *) Add Makefile.shared, a helper makefile to build shared
728 libraries. Addapt Makefile.org.
731 *) Add version info to Win32 DLLs.
732 [Peter 'Luna' Runestig" <peter@runestig.com>]
734 *) Add new 'medium level' PKCS#12 API. Certificates and keys
735 can be added using this API to created arbitrary PKCS#12
736 files while avoiding the low level API.
738 New options to PKCS12_create(), key or cert can be NULL and
739 will then be omitted from the output file. The encryption
740 algorithm NIDs can be set to -1 for no encryption, the mac
741 iteration count can be set to 0 to omit the mac.
743 Enhance pkcs12 utility by making the -nokeys and -nocerts
744 options work when creating a PKCS#12 file. New option -nomac
745 to omit the mac, NONE can be set for an encryption algorithm.
746 New code is modified to use the enhanced PKCS12_create()
747 instead of the low level API.
750 *) Extend ASN1 encoder to support indefinite length constructed
751 encoding. This can output sequences tags and octet strings in
752 this form. Modify pk7_asn1.c to support indefinite length
753 encoding. This is experimental and needs additional code to
754 be useful, such as an ASN1 bio and some enhanced streaming
757 Extend template encode functionality so that tagging is passed
758 down to the template encoder.
761 *) Let 'openssl req' fail if an argument to '-newkey' is not
762 recognized instead of using RSA as a default.
765 *) Add support for ECC-based ciphersuites from draft-ietf-tls-ecc-01.txt.
766 As these are not official, they are not included in "ALL";
767 the "ECCdraft" ciphersuite group alias can be used to select them.
768 [Vipul Gupta and Sumit Gupta (Sun Microsystems Laboratories)]
770 *) Add ECDH engine support.
771 [Nils Gura and Douglas Stebila (Sun Microsystems Laboratories)]
773 *) Add ECDH in new directory crypto/ecdh/.
774 [Douglas Stebila (Sun Microsystems Laboratories)]
776 *) Let BN_rand_range() abort with an error after 100 iterations
777 without success (which indicates a broken PRNG).
780 *) Change BN_mod_sqrt() so that it verifies that the input value
781 is really the square of the return value. (Previously,
782 BN_mod_sqrt would show GIGO behaviour.)
785 *) Add named elliptic curves over binary fields from X9.62, SECG,
786 and WAP/WTLS; add OIDs that were still missing.
788 [Sheueling Chang Shantz and Douglas Stebila
789 (Sun Microsystems Laboratories)]
791 *) Extend the EC library for elliptic curves over binary fields
792 (new files ec2_smpl.c, ec2_smpt.c, ec2_mult.c in crypto/ec/).
795 EC_GF2m_simple_method
799 EC_GROUP_new_curve_GF2m
800 EC_GROUP_set_curve_GF2m
801 EC_GROUP_get_curve_GF2m
802 EC_POINT_set_affine_coordinates_GF2m
803 EC_POINT_get_affine_coordinates_GF2m
804 EC_POINT_set_compressed_coordinates_GF2m
806 Point compression for binary fields is disabled by default for
807 patent reasons (compile with OPENSSL_EC_BIN_PT_COMP defined to
810 As binary polynomials are represented as BIGNUMs, various members
811 of the EC_GROUP and EC_POINT data structures can be shared
812 between the implementations for prime fields and binary fields;
813 the above ..._GF2m functions (except for EX_GROUP_new_curve_GF2m)
814 are essentially identical to their ..._GFp counterparts.
815 (For simplicity, the '..._GFp' prefix has been dropped from
816 various internal method names.)
818 An internal 'field_div' method (similar to 'field_mul' and
819 'field_sqr') has been added; this is used only for binary fields.
821 [Sheueling Chang Shantz and Douglas Stebila
822 (Sun Microsystems Laboratories)]
824 *) Optionally dispatch EC_POINT_mul(), EC_POINT_precompute_mult()
825 through methods ('mul', 'precompute_mult').
827 The generic implementations (now internally called 'ec_wNAF_mul'
828 and 'ec_wNAF_precomputed_mult') remain the default if these
829 methods are undefined.
831 [Sheueling Chang Shantz and Douglas Stebila
832 (Sun Microsystems Laboratories)]
834 *) New function EC_GROUP_get_degree, which is defined through
835 EC_METHOD. For curves over prime fields, this returns the bit
836 length of the modulus.
838 [Sheueling Chang Shantz and Douglas Stebila
839 (Sun Microsystems Laboratories)]
841 *) New functions EC_GROUP_dup, EC_POINT_dup.
842 (These simply call ..._new and ..._copy).
844 [Sheueling Chang Shantz and Douglas Stebila
845 (Sun Microsystems Laboratories)]
847 *) Add binary polynomial arithmetic software in crypto/bn/bn_gf2m.c.
848 Polynomials are represented as BIGNUMs (where the sign bit is not
849 used) in the following functions [macros]:
852 BN_GF2m_sub [= BN_GF2m_add]
853 BN_GF2m_mod [wrapper for BN_GF2m_mod_arr]
854 BN_GF2m_mod_mul [wrapper for BN_GF2m_mod_mul_arr]
855 BN_GF2m_mod_sqr [wrapper for BN_GF2m_mod_sqr_arr]
857 BN_GF2m_mod_exp [wrapper for BN_GF2m_mod_exp_arr]
858 BN_GF2m_mod_sqrt [wrapper for BN_GF2m_mod_sqrt_arr]
859 BN_GF2m_mod_solve_quad [wrapper for BN_GF2m_mod_solve_quad_arr]
860 BN_GF2m_cmp [= BN_ucmp]
862 (Note that only the 'mod' functions are actually for fields GF(2^m).
863 BN_GF2m_add() is misnomer, but this is for the sake of consistency.)
865 For some functions, an the irreducible polynomial defining a
866 field can be given as an 'unsigned int[]' with strictly
867 decreasing elements giving the indices of those bits that are set;
868 i.e., p[] represents the polynomial
869 f(t) = t^p[0] + t^p[1] + ... + t^p[k]
871 p[0] > p[1] > ... > p[k] = 0.
872 This applies to the following functions:
877 BN_GF2m_mod_inv_arr [wrapper for BN_GF2m_mod_inv]
878 BN_GF2m_mod_div_arr [wrapper for BN_GF2m_mod_div]
881 BN_GF2m_mod_solve_quad_arr
885 Conversion can be performed by the following functions:
890 bntest.c has additional tests for binary polynomial arithmetic.
892 Two implementations for BN_GF2m_mod_div() are available.
893 The default algorithm simply uses BN_GF2m_mod_inv() and
894 BN_GF2m_mod_mul(). The alternative algorithm is compiled in only
895 if OPENSSL_SUN_GF2M_DIV is defined (patent pending; read the
896 copyright notice in crypto/bn/bn_gf2m.c before enabling it).
898 [Sheueling Chang Shantz and Douglas Stebila
899 (Sun Microsystems Laboratories)]
901 *) Add new error code 'ERR_R_DISABLED' that can be used when some
902 functionality is disabled at compile-time.
903 [Douglas Stebila <douglas.stebila@sun.com>]
905 *) Change default behaviour of 'openssl asn1parse' so that more
906 information is visible when viewing, e.g., a certificate:
908 Modify asn1_parse2 (crypto/asn1/asn1_par.c) so that in non-'dump'
909 mode the content of non-printable OCTET STRINGs is output in a
910 style similar to INTEGERs, but with '[HEX DUMP]' prepended to
911 avoid the appearance of a printable string.
912 [Nils Larsch <nla@trustcenter.de>]
914 *) Add 'asn1_flag' and 'asn1_form' member to EC_GROUP with access
916 EC_GROUP_set_asn1_flag()
917 EC_GROUP_get_asn1_flag()
918 EC_GROUP_set_point_conversion_form()
919 EC_GROUP_get_point_conversion_form()
920 These control ASN1 encoding details:
921 - Curves (i.e., groups) are encoded explicitly unless asn1_flag
922 has been set to OPENSSL_EC_NAMED_CURVE.
923 - Points are encoded in uncompressed form by default; options for
924 asn1_for are as for point2oct, namely
925 POINT_CONVERSION_COMPRESSED
926 POINT_CONVERSION_UNCOMPRESSED
927 POINT_CONVERSION_HYBRID
929 Also add 'seed' and 'seed_len' members to EC_GROUP with access
933 EC_GROUP_get_seed_len()
934 This is used only for ASN1 purposes (so far).
935 [Nils Larsch <nla@trustcenter.de>]
937 *) Add 'field_type' member to EC_METHOD, which holds the NID
938 of the appropriate field type OID. The new function
939 EC_METHOD_get_field_type() returns this value.
940 [Nils Larsch <nla@trustcenter.de>]
947 providing useful interfaces to EC_POINT_point2oct() and
948 EC_POINT_oct2point().
949 [Nils Larsch <nla@trustcenter.de>]
951 *) Change internals of the EC library so that the functions
952 EC_GROUP_set_generator()
953 EC_GROUP_get_generator()
955 EC_GROUP_get_cofactor()
956 are implemented directly in crypto/ec/ec_lib.c and not dispatched
957 to methods, which would lead to unnecessary code duplication when
958 adding different types of curves.
959 [Nils Larsch <nla@trustcenter.de> with input by Bodo Moeller]
961 *) Implement compute_wNAF (crypto/ec/ec_mult.c) without BIGNUM
962 arithmetic, and such that modified wNAFs are generated
963 (which avoid length expansion in many cases).
966 *) Add a function EC_GROUP_check_discriminant() (defined via
967 EC_METHOD) that verifies that the curve discriminant is non-zero.
969 Add a function EC_GROUP_check() that makes some sanity tests
970 on a EC_GROUP, its generator and order. This includes
971 EC_GROUP_check_discriminant().
972 [Nils Larsch <nla@trustcenter.de>]
974 *) Add ECDSA in new directory crypto/ecdsa/.
976 Add applications 'openssl ecparam' and 'openssl ecdsa'
977 (these are based on 'openssl dsaparam' and 'openssl dsa').
979 ECDSA support is also included in various other files across the
980 library. Most notably,
981 - 'openssl req' now has a '-newkey ecdsa:file' option;
982 - EVP_PKCS82PKEY (crypto/evp/evp_pkey.c) now can handle ECDSA;
983 - X509_PUBKEY_get (crypto/asn1/x_pubkey.c) and
984 d2i_PublicKey (crypto/asn1/d2i_pu.c) have been modified to make
985 them suitable for ECDSA where domain parameters must be
986 extracted before the specific public key;
987 - ECDSA engine support has been added.
988 [Nils Larsch <nla@trustcenter.de>]
990 *) Include some named elliptic curves, and add OIDs from X9.62,
991 SECG, and WAP/WTLS. Each curve can be obtained from the new
993 EC_GROUP_new_by_curve_name(),
994 and the list of available named curves can be obtained with
995 EC_get_builtin_curves().
996 Also add a 'curve_name' member to EC_GROUP objects, which can be
998 EC_GROUP_set_curve_name()
999 EC_GROUP_get_curve_name()
1000 [Nils Larsch <larsch@trustcenter.de, Bodo Moeller]
1002 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
1003 was actually never needed) and in BN_mul(). The removal in BN_mul()
1004 required a small change in bn_mul_part_recursive() and the addition
1005 of the functions bn_cmp_part_words(), bn_sub_part_words() and
1006 bn_add_part_words(), which do the same thing as bn_cmp_words(),
1007 bn_sub_words() and bn_add_words() except they take arrays with
1011 Changes between 0.9.7k and 0.9.7l [xx XXX xxxx]
1013 *) Change ciphersuite string processing so that an explicit
1014 ciphersuite selects this one ciphersuite (so that "AES256-SHA"
1015 will no longer include "AES128-SHA"), and any other similar
1016 ciphersuite (same bitmap) from *other* protocol versions (so that
1017 "RC4-MD5" will still include both the SSL 2.0 ciphersuite and the
1018 SSL 3.0/TLS 1.0 ciphersuite). This is a backport combining
1019 changes from 0.9.8b and 0.9.8d.
1022 Changes between 0.9.7j and 0.9.7k [05 Sep 2006]
1024 *) Avoid PKCS #1 v1.5 signature attack discovered by Daniel Bleichenbacher
1025 (CVE-2006-4339) [Ben Laurie and Google Security Team]
1027 *) Change the Unix randomness entropy gathering to use poll() when
1028 possible instead of select(), since the latter has some
1029 undesirable limitations.
1030 [Darryl Miles via Richard Levitte and Bodo Moeller]
1032 *) Disable rogue ciphersuites:
1034 - SSLv2 0x08 0x00 0x80 ("RC4-64-MD5")
1035 - SSLv3/TLSv1 0x00 0x61 ("EXP1024-RC2-CBC-MD5")
1036 - SSLv3/TLSv1 0x00 0x60 ("EXP1024-RC4-MD5")
1038 The latter two were purportedly from
1039 draft-ietf-tls-56-bit-ciphersuites-0[01].txt, but do not really
1042 Also deactive the remaining ciphersuites from
1043 draft-ietf-tls-56-bit-ciphersuites-01.txt. These are just as
1044 unofficial, and the ID has long expired.
1047 *) Fix RSA blinding Heisenbug (problems sometimes occured on
1048 dual-core machines) and other potential thread-safety issues.
1051 Changes between 0.9.7i and 0.9.7j [04 May 2006]
1053 *) Adapt fipsld and the build system to link against the validated FIPS
1054 module in FIPS mode.
1057 *) Fixes for VC++ 2005 build under Windows.
1060 *) Add new Windows build target VC-32-GMAKE for VC++. This uses GNU make
1061 from a Windows bash shell such as MSYS. It is autodetected from the
1062 "config" script when run from a VC++ environment. Modify standard VC++
1063 build to use fipscanister.o from the GNU make build.
1066 Changes between 0.9.7h and 0.9.7i [14 Oct 2005]
1068 *) Wrapped the definition of EVP_MAX_MD_SIZE in a #ifdef OPENSSL_FIPS.
1069 The value now differs depending on if you build for FIPS or not.
1070 BEWARE! A program linked with a shared FIPSed libcrypto can't be
1071 safely run with a non-FIPSed libcrypto, as it may crash because of
1072 the difference induced by this change.
1075 Changes between 0.9.7g and 0.9.7h [11 Oct 2005]
1077 *) Remove the functionality of SSL_OP_MSIE_SSLV2_RSA_PADDING
1078 (part of SSL_OP_ALL). This option used to disable the
1079 countermeasure against man-in-the-middle protocol-version
1080 rollback in the SSL 2.0 server implementation, which is a bad
1081 idea. (CVE-2005-2969)
1083 [Bodo Moeller; problem pointed out by Yutaka Oiwa (Research Center
1084 for Information Security, National Institute of Advanced Industrial
1085 Science and Technology [AIST], Japan)]
1087 *) Minimal support for X9.31 signatures and PSS padding modes. This is
1088 mainly for FIPS compliance and not fully integrated at this stage.
1091 *) For DSA signing, unless DSA_FLAG_NO_EXP_CONSTTIME is set, perform
1092 the exponentiation using a fixed-length exponent. (Otherwise,
1093 the information leaked through timing could expose the secret key
1094 after many signatures; cf. Bleichenbacher's attack on DSA with
1098 *) Make a new fixed-window mod_exp implementation the default for
1099 RSA, DSA, and DH private-key operations so that the sequence of
1100 squares and multiplies and the memory access pattern are
1101 independent of the particular secret key. This will mitigate
1102 cache-timing and potential related attacks.
1104 BN_mod_exp_mont_consttime() is the new exponentiation implementation,
1105 and this is automatically used by BN_mod_exp_mont() if the new flag
1106 BN_FLG_EXP_CONSTTIME is set for the exponent. RSA, DSA, and DH
1107 will use this BN flag for private exponents unless the flag
1108 RSA_FLAG_NO_EXP_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME, or
1109 DH_FLAG_NO_EXP_CONSTTIME, respectively, is set.
1111 [Matthew D Wood (Intel Corp), with some changes by Bodo Moeller]
1113 *) Change the client implementation for SSLv23_method() and
1114 SSLv23_client_method() so that is uses the SSL 3.0/TLS 1.0
1115 Client Hello message format if the SSL_OP_NO_SSLv2 option is set.
1116 (Previously, the SSL 2.0 backwards compatible Client Hello
1117 message format would be used even with SSL_OP_NO_SSLv2.)
1120 *) Add support for smime-type MIME parameter in S/MIME messages which some
1124 *) New function BN_MONT_CTX_set_locked() to set montgomery parameters in
1125 a threadsafe manner. Modify rsa code to use new function and add calls
1126 to dsa and dh code (which had race conditions before).
1129 *) Include the fixed error library code in the C error file definitions
1130 instead of fixing them up at runtime. This keeps the error code
1131 structures constant.
1134 Changes between 0.9.7f and 0.9.7g [11 Apr 2005]
1136 [NB: OpenSSL 0.9.7h and later 0.9.7 patch levels were released after
1139 *) Fixes for newer kerberos headers. NB: the casts are needed because
1140 the 'length' field is signed on one version and unsigned on another
1141 with no (?) obvious way to tell the difference, without these VC++
1142 complains. Also the "definition" of FAR (blank) is no longer included
1143 nor is the error ENOMEM. KRB5_PRIVATE has to be set to 1 to pick up
1144 some needed definitions.
1147 *) Undo Cygwin change.
1150 *) Added support for proxy certificates according to RFC 3820.
1151 Because they may be a security thread to unaware applications,
1152 they must be explicitely allowed in run-time. See
1153 docs/HOWTO/proxy_certificates.txt for further information.
1156 Changes between 0.9.7e and 0.9.7f [22 Mar 2005]
1158 *) Use (SSL_RANDOM_VALUE - 4) bytes of pseudo random data when generating
1159 server and client random values. Previously
1160 (SSL_RANDOM_VALUE - sizeof(time_t)) would be used which would result in
1161 less random data when sizeof(time_t) > 4 (some 64 bit platforms).
1163 This change has negligible security impact because:
1165 1. Server and client random values still have 24 bytes of pseudo random
1168 2. Server and client random values are sent in the clear in the initial
1171 3. The master secret is derived using the premaster secret (48 bytes in
1172 size for static RSA ciphersuites) as well as client server and random
1175 The OpenSSL team would like to thank the UK NISCC for bringing this issue
1178 [Stephen Henson, reported by UK NISCC]
1180 *) Use Windows randomness collection on Cygwin.
1183 *) Fix hang in EGD/PRNGD query when communication socket is closed
1184 prematurely by EGD/PRNGD.
1185 [Darren Tucker <dtucker@zip.com.au> via Lutz Jänicke, resolves #1014]
1187 *) Prompt for pass phrases when appropriate for PKCS12 input format.
1190 *) Back-port of selected performance improvements from development
1191 branch, as well as improved support for PowerPC platforms.
1194 *) Add lots of checks for memory allocation failure, error codes to indicate
1195 failure and freeing up memory if a failure occurs.
1196 [Nauticus Networks SSL Team <openssl@nauticusnet.com>, Steve Henson]
1198 *) Add new -passin argument to dgst.
1201 *) Perform some character comparisons of different types in X509_NAME_cmp:
1202 this is needed for some certificates that reencode DNs into UTF8Strings
1203 (in violation of RFC3280) and can't or wont issue name rollover
1207 *) Make an explicit check during certificate validation to see that
1208 the CA setting in each certificate on the chain is correct. As a
1209 side effect always do the following basic checks on extensions,
1210 not just when there's an associated purpose to the check:
1212 - if there is an unhandled critical extension (unless the user
1213 has chosen to ignore this fault)
1214 - if the path length has been exceeded (if one is set at all)
1215 - that certain extensions fit the associated purpose (if one has
1219 Changes between 0.9.7d and 0.9.7e [25 Oct 2004]
1221 *) Avoid a race condition when CRLs are checked in a multi threaded
1222 environment. This would happen due to the reordering of the revoked
1223 entries during signature checking and serial number lookup. Now the
1224 encoding is cached and the serial number sort performed under a lock.
1225 Add new STACK function sk_is_sorted().
1228 *) Add Delta CRL to the extension code.
1231 *) Various fixes to s3_pkt.c so alerts are sent properly.
1232 [David Holmes <d.holmes@f5.com>]
1234 *) Reduce the chances of duplicate issuer name and serial numbers (in
1235 violation of RFC3280) using the OpenSSL certificate creation utilities.
1236 This is done by creating a random 64 bit value for the initial serial
1237 number when a serial number file is created or when a self signed
1238 certificate is created using 'openssl req -x509'. The initial serial
1239 number file is created using 'openssl x509 -next_serial' in CA.pl
1240 rather than being initialized to 1.
1243 Changes between 0.9.7c and 0.9.7d [17 Mar 2004]
1245 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
1246 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
1247 [Joe Orton, Steve Henson]
1249 *) Fix flaw in SSL/TLS handshaking when using Kerberos ciphersuites
1251 [Joe Orton, Steve Henson]
1253 *) Make it possible to have multiple active certificates with the same
1254 subject in the CA index file. This is done only if the keyword
1255 'unique_subject' is set to 'no' in the main CA section (default
1256 if 'CA_default') of the configuration file. The value is saved
1257 with the database itself in a separate index attribute file,
1258 named like the index file with '.attr' appended to the name.
1261 *) X509 verify fixes. Disable broken certificate workarounds when
1262 X509_V_FLAGS_X509_STRICT is set. Check CRL issuer has cRLSign set if
1263 keyUsage extension present. Don't accept CRLs with unhandled critical
1264 extensions: since verify currently doesn't process CRL extensions this
1265 rejects a CRL with *any* critical extensions. Add new verify error codes
1269 *) When creating an OCSP nonce use an OCTET STRING inside the extnValue.
1270 A clarification of RFC2560 will require the use of OCTET STRINGs and
1271 some implementations cannot handle the current raw format. Since OpenSSL
1272 copies and compares OCSP nonces as opaque blobs without any attempt at
1273 parsing them this should not create any compatibility issues.
1276 *) New md flag EVP_MD_CTX_FLAG_REUSE this allows md_data to be reused when
1277 calling EVP_MD_CTX_copy_ex() to avoid calling OPENSSL_malloc(). Without
1278 this HMAC (and other) operations are several times slower than OpenSSL
1282 *) Print out GeneralizedTime and UTCTime in ASN1_STRING_print_ex().
1283 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1285 *) Use the correct content when signing type "other".
1288 Changes between 0.9.7b and 0.9.7c [30 Sep 2003]
1290 *) Fix various bugs revealed by running the NISCC test suite:
1292 Stop out of bounds reads in the ASN1 code when presented with
1293 invalid tags (CVE-2003-0543 and CVE-2003-0544).
1295 Free up ASN1_TYPE correctly if ANY type is invalid (CVE-2003-0545).
1297 If verify callback ignores invalid public key errors don't try to check
1298 certificate signature with the NULL public key.
1302 *) New -ignore_err option in ocsp application to stop the server
1303 exiting on the first error in a request.
1306 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
1307 if the server requested one: as stated in TLS 1.0 and SSL 3.0
1311 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
1312 extra data after the compression methods not only for TLS 1.0
1313 but also for SSL 3.0 (as required by the specification).
1314 [Bodo Moeller; problem pointed out by Matthias Loepfe]
1316 *) Change X509_certificate_type() to mark the key as exported/exportable
1317 when it's 512 *bits* long, not 512 bytes.
1320 *) Change AES_cbc_encrypt() so it outputs exact multiple of
1321 blocks during encryption.
1324 *) Various fixes to base64 BIO and non blocking I/O. On write
1325 flushes were not handled properly if the BIO retried. On read
1326 data was not being buffered properly and had various logic bugs.
1327 This also affects blocking I/O when the data being decoded is a
1331 *) Various S/MIME bugfixes and compatibility changes:
1332 output correct application/pkcs7 MIME type if
1333 PKCS7_NOOLDMIMETYPE is set. Tolerate some broken signatures.
1334 Output CR+LF for EOL if PKCS7_CRLFEOL is set (this makes opening
1335 of files as .eml work). Correctly handle very long lines in MIME
1339 Changes between 0.9.7a and 0.9.7b [10 Apr 2003]
1341 *) Countermeasure against the Klima-Pokorny-Rosa extension of
1342 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
1343 a protocol version number mismatch like a decryption error
1344 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
1347 *) Turn on RSA blinding by default in the default implementation
1348 to avoid a timing attack. Applications that don't want it can call
1349 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
1350 They would be ill-advised to do so in most cases.
1351 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
1353 *) Change RSA blinding code so that it works when the PRNG is not
1354 seeded (in this case, the secret RSA exponent is abused as
1355 an unpredictable seed -- if it is not unpredictable, there
1356 is no point in blinding anyway). Make RSA blinding thread-safe
1357 by remembering the creator's thread ID in rsa->blinding and
1358 having all other threads use local one-time blinding factors
1359 (this requires more computation than sharing rsa->blinding, but
1360 avoids excessive locking; and if an RSA object is not shared
1361 between threads, blinding will still be very fast).
1364 *) Fixed a typo bug that would cause ENGINE_set_default() to set an
1365 ENGINE as defaults for all supported algorithms irrespective of
1366 the 'flags' parameter. 'flags' is now honoured, so applications
1367 should make sure they are passing it correctly.
1370 *) Target "mingw" now allows native Windows code to be generated in
1371 the Cygwin environment as well as with the MinGW compiler.
1374 Changes between 0.9.7 and 0.9.7a [19 Feb 2003]
1376 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
1377 via timing by performing a MAC computation even if incorrrect
1378 block cipher padding has been found. This is a countermeasure
1379 against active attacks where the attacker has to distinguish
1380 between bad padding and a MAC verification error. (CVE-2003-0078)
1382 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
1383 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
1384 Martin Vuagnoux (EPFL, Ilion)]
1386 *) Make the no-err option work as intended. The intention with no-err
1387 is not to have the whole error stack handling routines removed from
1388 libcrypto, it's only intended to remove all the function name and
1389 reason texts, thereby removing some of the footprint that may not
1390 be interesting if those errors aren't displayed anyway.
1392 NOTE: it's still possible for any application or module to have it's
1393 own set of error texts inserted. The routines are there, just not
1394 used by default when no-err is given.
1397 *) Add support for FreeBSD on IA64.
1398 [dirk.meyer@dinoex.sub.org via Richard Levitte, resolves #454]
1400 *) Adjust DES_cbc_cksum() so it returns the same value as the MIT
1401 Kerberos function mit_des_cbc_cksum(). Before this change,
1402 the value returned by DES_cbc_cksum() was like the one from
1403 mit_des_cbc_cksum(), except the bytes were swapped.
1404 [Kevin Greaney <Kevin.Greaney@hp.com> and Richard Levitte]
1406 *) Allow an application to disable the automatic SSL chain building.
1407 Before this a rather primitive chain build was always performed in
1408 ssl3_output_cert_chain(): an application had no way to send the
1409 correct chain if the automatic operation produced an incorrect result.
1411 Now the chain builder is disabled if either:
1413 1. Extra certificates are added via SSL_CTX_add_extra_chain_cert().
1415 2. The mode flag SSL_MODE_NO_AUTO_CHAIN is set.
1417 The reasoning behind this is that an application would not want the
1418 auto chain building to take place if extra chain certificates are
1419 present and it might also want a means of sending no additional
1420 certificates (for example the chain has two certificates and the
1424 *) Add the possibility to build without the ENGINE framework.
1425 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1427 *) Under Win32 gmtime() can return NULL: check return value in
1428 OPENSSL_gmtime(). Add error code for case where gmtime() fails.
1431 *) DSA routines: under certain error conditions uninitialized BN objects
1432 could be freed. Solution: make sure initialization is performed early
1433 enough. (Reported and fix supplied by Ivan D Nestlerode <nestler@MIT.EDU>,
1434 Nils Larsch <nla@trustcenter.de> via PR#459)
1437 *) Another fix for SSLv2 session ID handling: the session ID was incorrectly
1438 checked on reconnect on the client side, therefore session resumption
1439 could still fail with a "ssl session id is different" error. This
1440 behaviour is masked when SSL_OP_ALL is used due to
1441 SSL_OP_MICROSOFT_SESS_ID_BUG being set.
1442 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1443 followup to PR #377.
1446 *) IA-32 assembler support enhancements: unified ELF targets, support
1447 for SCO/Caldera platforms, fix for Cygwin shared build.
1450 *) Add support for FreeBSD on sparc64. As a consequence, support for
1451 FreeBSD on non-x86 processors is separate from x86 processors on
1452 the config script, much like the NetBSD support.
1453 [Richard Levitte & Kris Kennaway <kris@obsecurity.org>]
1455 Changes between 0.9.6h and 0.9.7 [31 Dec 2002]
1457 [NB: OpenSSL 0.9.6i and later 0.9.6 patch levels were released after
1460 *) Fix session ID handling in SSLv2 client code: the SERVER FINISHED
1461 code (06) was taken as the first octet of the session ID and the last
1462 octet was ignored consequently. As a result SSLv2 client side session
1463 caching could not have worked due to the session ID mismatch between
1465 Behaviour observed by Crispin Flowerday <crispin@flowerday.cx> as
1469 *) Change the declaration of needed Kerberos libraries to use EX_LIBS
1470 instead of the special (and badly supported) LIBKRB5. LIBKRB5 is
1474 *) The hw_ncipher.c engine requires dynamic locks. Unfortunately, it
1475 seems that in spite of existing for more than a year, many application
1476 author have done nothing to provide the necessary callbacks, which
1477 means that this particular engine will not work properly anywhere.
1478 This is a very unfortunate situation which forces us, in the name
1479 of usability, to give the hw_ncipher.c a static lock, which is part
1481 NOTE: This is for the 0.9.7 series ONLY. This hack will never
1482 appear in 0.9.8 or later. We EXPECT application authors to have
1483 dealt properly with this when 0.9.8 is released (unless we actually
1484 make such changes in the libcrypto locking code that changes will
1485 have to be made anyway).
1488 *) In asn1_d2i_read_bio() repeatedly call BIO_read() until all content
1489 octets have been read, EOF or an error occurs. Without this change
1490 some truncated ASN1 structures will not produce an error.
1493 *) Disable Heimdal support, since it hasn't been fully implemented.
1494 Still give the possibility to force the use of Heimdal, but with
1495 warnings and a request that patches get sent to openssl-dev.
1498 *) Add the VC-CE target, introduce the WINCE sysname, and add
1499 INSTALL.WCE and appropriate conditionals to make it build.
1500 [Steven Reddie <smr@essemer.com.au> via Richard Levitte]
1502 *) Change the DLL names for Cygwin to cygcrypto-x.y.z.dll and
1503 cygssl-x.y.z.dll, where x, y and z are the major, minor and
1504 edit numbers of the version.
1505 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
1507 *) Introduce safe string copy and catenation functions
1508 (BUF_strlcpy() and BUF_strlcat()).
1509 [Ben Laurie (CHATS) and Richard Levitte]
1511 *) Avoid using fixed-size buffers for one-line DNs.
1512 [Ben Laurie (CHATS)]
1514 *) Add BUF_MEM_grow_clean() to avoid information leakage when
1515 resizing buffers containing secrets, and use where appropriate.
1516 [Ben Laurie (CHATS)]
1518 *) Avoid using fixed size buffers for configuration file location.
1519 [Ben Laurie (CHATS)]
1521 *) Avoid filename truncation for various CA files.
1522 [Ben Laurie (CHATS)]
1524 *) Use sizeof in preference to magic numbers.
1525 [Ben Laurie (CHATS)]
1527 *) Avoid filename truncation in cert requests.
1528 [Ben Laurie (CHATS)]
1530 *) Add assertions to check for (supposedly impossible) buffer
1532 [Ben Laurie (CHATS)]
1534 *) Don't cache truncated DNS entries in the local cache (this could
1535 potentially lead to a spoofing attack).
1536 [Ben Laurie (CHATS)]
1538 *) Fix various buffers to be large enough for hex/decimal
1539 representations in a platform independent manner.
1540 [Ben Laurie (CHATS)]
1542 *) Add CRYPTO_realloc_clean() to avoid information leakage when
1543 resizing buffers containing secrets, and use where appropriate.
1544 [Ben Laurie (CHATS)]
1546 *) Add BIO_indent() to avoid much slightly worrying code to do
1548 [Ben Laurie (CHATS)]
1550 *) Convert sprintf()/BIO_puts() to BIO_printf().
1551 [Ben Laurie (CHATS)]
1553 *) buffer_gets() could terminate with the buffer only half
1555 [Ben Laurie (CHATS)]
1557 *) Add assertions to prevent user-supplied crypto functions from
1558 overflowing internal buffers by having large block sizes, etc.
1559 [Ben Laurie (CHATS)]
1561 *) New OPENSSL_assert() macro (similar to assert(), but enabled
1563 [Ben Laurie (CHATS)]
1565 *) Eliminate unused copy of key in RC4.
1566 [Ben Laurie (CHATS)]
1568 *) Eliminate unused and incorrectly sized buffers for IV in pem.h.
1569 [Ben Laurie (CHATS)]
1571 *) Fix off-by-one error in EGD path.
1572 [Ben Laurie (CHATS)]
1574 *) If RANDFILE path is too long, ignore instead of truncating.
1575 [Ben Laurie (CHATS)]
1577 *) Eliminate unused and incorrectly sized X.509 structure
1579 [Ben Laurie (CHATS)]
1581 *) Eliminate unused and dangerous function knumber().
1582 [Ben Laurie (CHATS)]
1584 *) Eliminate unused and dangerous structure, KSSL_ERR.
1585 [Ben Laurie (CHATS)]
1587 *) Protect against overlong session ID context length in an encoded
1588 session object. Since these are local, this does not appear to be
1590 [Ben Laurie (CHATS)]
1592 *) Change from security patch (see 0.9.6e below) that did not affect
1593 the 0.9.6 release series:
1595 Remote buffer overflow in SSL3 protocol - an attacker could
1596 supply an oversized master key in Kerberos-enabled versions.
1598 [Ben Laurie (CHATS)]
1600 *) Change the SSL kerb5 codes to match RFC 2712.
1603 *) Make -nameopt work fully for req and add -reqopt switch.
1604 [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
1606 *) The "block size" for block ciphers in CFB and OFB mode should be 1.
1607 [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
1609 *) Make sure tests can be performed even if the corresponding algorithms
1610 have been removed entirely. This was also the last step to make
1611 OpenSSL compilable with DJGPP under all reasonable conditions.
1612 [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
1614 *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
1615 to allow version independent disabling of normally unselected ciphers,
1616 which may be activated as a side-effect of selecting a single cipher.
1618 (E.g., cipher list string "RSA" enables ciphersuites that are left
1619 out of "ALL" because they do not provide symmetric encryption.
1620 "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
1621 [Lutz Jaenicke, Bodo Moeller]
1623 *) Add appropriate support for separate platform-dependent build
1624 directories. The recommended way to make a platform-dependent
1625 build directory is the following (tested on Linux), maybe with
1628 # Place yourself outside of the OpenSSL source tree. In
1629 # this example, the environment variable OPENSSL_SOURCE
1630 # is assumed to contain the absolute OpenSSL source directory.
1631 mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
1632 cd objtree/"`uname -s`-`uname -r`-`uname -m`"
1633 (cd $OPENSSL_SOURCE; find . -type f) | while read F; do
1634 mkdir -p `dirname $F`
1635 ln -s $OPENSSL_SOURCE/$F $F
1638 To be absolutely sure not to disturb the source tree, a "make clean"
1639 is a good thing. If it isn't successfull, don't worry about it,
1640 it probably means the source directory is very clean.
1643 *) Make sure any ENGINE control commands make local copies of string
1644 pointers passed to them whenever necessary. Otherwise it is possible
1645 the caller may have overwritten (or deallocated) the original string
1646 data when a later ENGINE operation tries to use the stored values.
1647 [Götz Babin-Ebell <babinebell@trustcenter.de>]
1649 *) Improve diagnostics in file reading and command-line digests.
1650 [Ben Laurie aided and abetted by Solar Designer <solar@openwall.com>]
1652 *) Add AES modes CFB and OFB to the object database. Correct an
1653 error in AES-CFB decryption.
1656 *) Remove most calls to EVP_CIPHER_CTX_cleanup() in evp_enc.c, this
1657 allows existing EVP_CIPHER_CTX structures to be reused after
1658 calling EVP_*Final(). This behaviour is used by encryption
1659 BIOs and some applications. This has the side effect that
1660 applications must explicitly clean up cipher contexts with
1661 EVP_CIPHER_CTX_cleanup() or they will leak memory.
1664 *) Check the values of dna and dnb in bn_mul_recursive before calling
1665 bn_mul_comba (a non zero value means the a or b arrays do not contain
1666 n2 elements) and fallback to bn_mul_normal if either is not zero.
1669 *) Fix escaping of non-ASCII characters when using the -subj option
1670 of the "openssl req" command line tool. (Robert Joop <joop@fokus.gmd.de>)
1673 *) Make object definitions compliant to LDAP (RFC2256): SN is the short
1674 form for "surname", serialNumber has no short form.
1675 Use "mail" as the short name for "rfc822Mailbox" according to RFC2798;
1676 therefore remove "mail" short name for "internet 7".
1677 The OID for unique identifiers in X509 certificates is
1678 x500UniqueIdentifier, not uniqueIdentifier.
1679 Some more OID additions. (Michael Bell <michael.bell@rz.hu-berlin.de>)
1682 *) Add an "init" command to the ENGINE config module and auto initialize
1683 ENGINEs. Without any "init" command the ENGINE will be initialized
1684 after all ctrl commands have been executed on it. If init=1 the
1685 ENGINE is initailized at that point (ctrls before that point are run
1686 on the uninitialized ENGINE and after on the initialized one). If
1687 init=0 then the ENGINE will not be iniatialized at all.
1690 *) Fix the 'app_verify_callback' interface so that the user-defined
1691 argument is actually passed to the callback: In the
1692 SSL_CTX_set_cert_verify_callback() prototype, the callback
1693 declaration has been changed from
1696 int (*cb)(X509_STORE_CTX *,void *);
1697 in ssl_verify_cert_chain (ssl/ssl_cert.c), the call
1698 i=s->ctx->app_verify_callback(&ctx)
1699 has been changed into
1700 i=s->ctx->app_verify_callback(&ctx, s->ctx->app_verify_arg).
1702 To update applications using SSL_CTX_set_cert_verify_callback(),
1703 a dummy argument can be added to their callback functions.
1704 [D. K. Smetters <smetters@parc.xerox.com>]
1706 *) Added the '4758cca' ENGINE to support IBM 4758 cards.
1707 [Maurice Gittens <maurice@gittens.nl>, touchups by Geoff Thorpe]
1709 *) Add and OPENSSL_LOAD_CONF define which will cause
1710 OpenSSL_add_all_algorithms() to load the openssl.cnf config file.
1711 This allows older applications to transparently support certain
1712 OpenSSL features: such as crypto acceleration and dynamic ENGINE loading.
1713 Two new functions OPENSSL_add_all_algorithms_noconf() which will never
1714 load the config file and OPENSSL_add_all_algorithms_conf() which will
1715 always load it have also been added.
1718 *) Add the OFB, CFB and CTR (all with 128 bit feedback) to AES.
1719 Adjust NIDs and EVP layer.
1720 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1722 *) Config modules support in openssl utility.
1724 Most commands now load modules from the config file,
1725 though in a few (such as version) this isn't done
1726 because it couldn't be used for anything.
1728 In the case of ca and req the config file used is
1729 the same as the utility itself: that is the -config
1730 command line option can be used to specify an
1734 *) Move default behaviour from OPENSSL_config(). If appname is NULL
1735 use "openssl_conf" if filename is NULL use default openssl config file.
1738 *) Add an argument to OPENSSL_config() to allow the use of an alternative
1739 config section name. Add a new flag to tolerate a missing config file
1740 and move code to CONF_modules_load_file().
1743 *) Support for crypto accelerator cards from Accelerated Encryption
1744 Processing, www.aep.ie. (Use engine 'aep')
1745 The support was copied from 0.9.6c [engine] and adapted/corrected
1746 to work with the new engine framework.
1747 [AEP Inc. and Richard Levitte]
1749 *) Support for SureWare crypto accelerator cards from Baltimore
1750 Technologies. (Use engine 'sureware')
1751 The support was copied from 0.9.6c [engine] and adapted
1752 to work with the new engine framework.
1755 *) Have the CHIL engine fork-safe (as defined by nCipher) and actually
1756 make the newer ENGINE framework commands for the CHIL engine work.
1757 [Toomas Kiisk <vix@cyber.ee> and Richard Levitte]
1759 *) Make it possible to produce shared libraries on ReliantUNIX.
1760 [Robert Dahlem <Robert.Dahlem@ffm2.siemens.de> via Richard Levitte]
1762 *) Add the configuration target debug-linux-ppro.
1763 Make 'openssl rsa' use the general key loading routines
1764 implemented in apps.c, and make those routines able to
1765 handle the key format FORMAT_NETSCAPE and the variant
1767 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1769 *) Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
1770 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
1772 *) Add -keyform to rsautl, and document -engine.
1773 [Richard Levitte, inspired by Toomas Kiisk <vix@cyber.ee>]
1775 *) Change BIO_new_file (crypto/bio/bss_file.c) to use new
1776 BIO_R_NO_SUCH_FILE error code rather than the generic
1777 ERR_R_SYS_LIB error code if fopen() fails with ENOENT.
1780 *) Add new functions
1782 ERR_peek_last_error_line
1783 ERR_peek_last_error_line_data.
1784 These are similar to
1787 ERR_peek_error_line_data,
1788 but report on the latest error recorded rather than the first one
1789 still in the error queue.
1790 [Ben Laurie, Bodo Moeller]
1792 *) default_algorithms option in ENGINE config module. This allows things
1794 default_algorithms = ALL
1795 default_algorithms = RSA, DSA, RAND, CIPHERS, DIGESTS
1798 *) Prelminary ENGINE config module.
1801 *) New experimental application configuration code.
1804 *) Change the AES code to follow the same name structure as all other
1805 symmetric ciphers, and behave the same way. Move everything to
1806 the directory crypto/aes, thereby obsoleting crypto/rijndael.
1807 [Stephen Sprunk <stephen@sprunk.org> and Richard Levitte]
1809 *) SECURITY: remove unsafe setjmp/signal interaction from ui_openssl.c.
1810 [Ben Laurie and Theo de Raadt]
1812 *) Add option to output public keys in req command.
1813 [Massimiliano Pala madwolf@openca.org]
1815 *) Use wNAFs in EC_POINTs_mul() for improved efficiency
1816 (up to about 10% better than before for P-192 and P-224).
1819 *) New functions/macros
1821 SSL_CTX_set_msg_callback(ctx, cb)
1822 SSL_CTX_set_msg_callback_arg(ctx, arg)
1823 SSL_set_msg_callback(ssl, cb)
1824 SSL_set_msg_callback_arg(ssl, arg)
1826 to request calling a callback function
1828 void cb(int write_p, int version, int content_type,
1829 const void *buf, size_t len, SSL *ssl, void *arg)
1831 whenever a protocol message has been completely received
1832 (write_p == 0) or sent (write_p == 1). Here 'version' is the
1833 protocol version according to which the SSL library interprets
1834 the current protocol message (SSL2_VERSION, SSL3_VERSION, or
1835 TLS1_VERSION). 'content_type' is 0 in the case of SSL 2.0, or
1836 the content type as defined in the SSL 3.0/TLS 1.0 protocol
1837 specification (change_cipher_spec(20), alert(21), handshake(22)).
1838 'buf' and 'len' point to the actual message, 'ssl' to the
1839 SSL object, and 'arg' is the application-defined value set by
1840 SSL[_CTX]_set_msg_callback_arg().
1842 'openssl s_client' and 'openssl s_server' have new '-msg' options
1843 to enable a callback that displays all protocol messages.
1846 *) Change the shared library support so shared libraries are built as
1847 soon as the corresponding static library is finished, and thereby get
1848 openssl and the test programs linked against the shared library.
1849 This still only happens when the keyword "shard" has been given to
1850 the configuration scripts.
1852 NOTE: shared library support is still an experimental thing, and
1853 backward binary compatibility is still not guaranteed.
1854 ["Maciej W. Rozycki" <macro@ds2.pg.gda.pl> and Richard Levitte]
1856 *) Add support for Subject Information Access extension.
1857 [Peter Sylvester <Peter.Sylvester@EdelWeb.fr>]
1859 *) Make BUF_MEM_grow() behaviour more consistent: Initialise to zero
1860 additional bytes when new memory had to be allocated, not just
1861 when reusing an existing buffer.
1864 *) New command line and configuration option 'utf8' for the req command.
1865 This allows field values to be specified as UTF8 strings.
1868 *) Add -multi and -mr options to "openssl speed" - giving multiple parallel
1869 runs for the former and machine-readable output for the latter.
1872 *) Add '-noemailDN' option to 'openssl ca'. This prevents inclusion
1873 of the e-mail address in the DN (i.e., it will go into a certificate
1874 extension only). The new configuration file option 'email_in_dn = no'
1875 has the same effect.
1876 [Massimiliano Pala madwolf@openca.org]
1878 *) Change all functions with names starting with des_ to be starting
1879 with DES_ instead. Add wrappers that are compatible with libdes,
1880 but are named _ossl_old_des_*. Finally, add macros that map the
1881 des_* symbols to the corresponding _ossl_old_des_* if libdes
1882 compatibility is desired. If OpenSSL 0.9.6c compatibility is
1883 desired, the des_* symbols will be mapped to DES_*, with one
1886 Since we provide two compatibility mappings, the user needs to
1887 define the macro OPENSSL_DES_LIBDES_COMPATIBILITY if libdes
1888 compatibility is desired. The default (i.e., when that macro
1889 isn't defined) is OpenSSL 0.9.6c compatibility.
1891 There are also macros that enable and disable the support of old
1892 des functions altogether. Those are OPENSSL_ENABLE_OLD_DES_SUPPORT
1893 and OPENSSL_DISABLE_OLD_DES_SUPPORT. If none or both of those
1894 are defined, the default will apply: to support the old des routines.
1896 In either case, one must include openssl/des.h to get the correct
1897 definitions. Do not try to just include openssl/des_old.h, that
1900 NOTE: This is a major break of an old API into a new one. Software
1901 authors are encouraged to switch to the DES_ style functions. Some
1902 time in the future, des_old.h and the libdes compatibility functions
1903 will be disable (i.e. OPENSSL_DISABLE_OLD_DES_SUPPORT will be the
1904 default), and then completely removed.
1907 *) Test for certificates which contain unsupported critical extensions.
1908 If such a certificate is found during a verify operation it is
1909 rejected by default: this behaviour can be overridden by either
1910 handling the new error X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION or
1911 by setting the verify flag X509_V_FLAG_IGNORE_CRITICAL. A new function
1912 X509_supported_extension() has also been added which returns 1 if a
1913 particular extension is supported.
1916 *) Modify the behaviour of EVP cipher functions in similar way to digests
1917 to retain compatibility with existing code.
1920 *) Modify the behaviour of EVP_DigestInit() and EVP_DigestFinal() to retain
1921 compatibility with existing code. In particular the 'ctx' parameter does
1922 not have to be to be initialized before the call to EVP_DigestInit() and
1923 it is tidied up after a call to EVP_DigestFinal(). New function
1924 EVP_DigestFinal_ex() which does not tidy up the ctx. Similarly function
1925 EVP_MD_CTX_copy() changed to not require the destination to be
1926 initialized valid and new function EVP_MD_CTX_copy_ex() added which
1927 requires the destination to be valid.
1929 Modify all the OpenSSL digest calls to use EVP_DigestInit_ex(),
1930 EVP_DigestFinal_ex() and EVP_MD_CTX_copy_ex().
1933 *) Change ssl3_get_message (ssl/s3_both.c) and the functions using it
1934 so that complete 'Handshake' protocol structures are kept in memory
1935 instead of overwriting 'msg_type' and 'length' with 'body' data.
1938 *) Add an implementation of SSL_add_dir_cert_subjects_to_stack for Win32.
1939 [Massimo Santin via Richard Levitte]
1941 *) Major restructuring to the underlying ENGINE code. This includes
1942 reduction of linker bloat, separation of pure "ENGINE" manipulation
1943 (initialisation, etc) from functionality dealing with implementations
1944 of specific crypto iterfaces. This change also introduces integrated
1945 support for symmetric ciphers and digest implementations - so ENGINEs
1946 can now accelerate these by providing EVP_CIPHER and EVP_MD
1947 implementations of their own. This is detailed in crypto/engine/README
1948 as it couldn't be adequately described here. However, there are a few
1949 API changes worth noting - some RSA, DSA, DH, and RAND functions that
1950 were changed in the original introduction of ENGINE code have now
1951 reverted back - the hooking from this code to ENGINE is now a good
1952 deal more passive and at run-time, operations deal directly with
1953 RSA_METHODs, DSA_METHODs (etc) as they did before, rather than
1954 dereferencing through an ENGINE pointer any more. Also, the ENGINE
1955 functions dealing with BN_MOD_EXP[_CRT] handlers have been removed -
1956 they were not being used by the framework as there is no concept of a
1957 BIGNUM_METHOD and they could not be generalised to the new
1958 'ENGINE_TABLE' mechanism that underlies the new code. Similarly,
1959 ENGINE_cpy() has been removed as it cannot be consistently defined in
1963 *) Change ASN1_GENERALIZEDTIME_check() to allow fractional seconds.
1966 *) Change mkdef.pl to sort symbols that get the same entry number,
1967 and make sure the automatically generated functions ERR_load_*
1968 become part of libeay.num as well.
1971 *) New function SSL_renegotiate_pending(). This returns true once
1972 renegotiation has been requested (either SSL_renegotiate() call
1973 or HelloRequest/ClientHello receveived from the peer) and becomes
1974 false once a handshake has been completed.
1975 (For servers, SSL_renegotiate() followed by SSL_do_handshake()
1976 sends a HelloRequest, but does not ensure that a handshake takes
1977 place. SSL_renegotiate_pending() is useful for checking if the
1978 client has followed the request.)
1981 *) New SSL option SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION.
1982 By default, clients may request session resumption even during
1983 renegotiation (if session ID contexts permit); with this option,
1984 session resumption is possible only in the first handshake.
1986 SSL_OP_ALL is now 0x00000FFFL instead of 0x000FFFFFL. This makes
1987 more bits available for options that should not be part of
1988 SSL_OP_ALL (such as SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION).
1991 *) Add some demos for certificate and certificate request creation.
1994 *) Make maximum certificate chain size accepted from the peer application
1995 settable (SSL*_get/set_max_cert_list()), as proposed by
1996 "Douglas E. Engert" <deengert@anl.gov>.
1999 *) Add support for shared libraries for Unixware-7
2000 (Boyd Lynn Gerber <gerberb@zenez.com>).
2003 *) Add a "destroy" handler to ENGINEs that allows structural cleanup to
2004 be done prior to destruction. Use this to unload error strings from
2005 ENGINEs that load their own error strings. NB: This adds two new API
2006 functions to "get" and "set" this destroy handler in an ENGINE.
2009 *) Alter all existing ENGINE implementations (except "openssl" and
2010 "openbsd") to dynamically instantiate their own error strings. This
2011 makes them more flexible to be built both as statically-linked ENGINEs
2012 and self-contained shared-libraries loadable via the "dynamic" ENGINE.
2013 Also, add stub code to each that makes building them as self-contained
2014 shared-libraries easier (see README.ENGINE).
2017 *) Add a "dynamic" ENGINE that provides a mechanism for binding ENGINE
2018 implementations into applications that are completely implemented in
2019 self-contained shared-libraries. The "dynamic" ENGINE exposes control
2020 commands that can be used to configure what shared-library to load and
2021 to control aspects of the way it is handled. Also, made an update to
2022 the README.ENGINE file that brings its information up-to-date and
2023 provides some information and instructions on the "dynamic" ENGINE
2024 (ie. how to use it, how to build "dynamic"-loadable ENGINEs, etc).
2027 *) Make it possible to unload ranges of ERR strings with a new
2028 "ERR_unload_strings" function.
2031 *) Add a copy() function to EVP_MD.
2034 *) Make EVP_MD routines take a context pointer instead of just the
2035 md_data void pointer.
2038 *) Add flags to EVP_MD and EVP_MD_CTX. EVP_MD_FLAG_ONESHOT indicates
2039 that the digest can only process a single chunk of data
2040 (typically because it is provided by a piece of
2041 hardware). EVP_MD_CTX_FLAG_ONESHOT indicates that the application
2042 is only going to provide a single chunk of data, and hence the
2043 framework needn't accumulate the data for oneshot drivers.
2046 *) As with "ERR", make it possible to replace the underlying "ex_data"
2047 functions. This change also alters the storage and management of global
2048 ex_data state - it's now all inside ex_data.c and all "class" code (eg.
2049 RSA, BIO, SSL_CTX, etc) no longer stores its own STACKS and per-class
2050 index counters. The API functions that use this state have been changed
2051 to take a "class_index" rather than pointers to the class's local STACK
2052 and counter, and there is now an API function to dynamically create new
2053 classes. This centralisation allows us to (a) plug a lot of the
2054 thread-safety problems that existed, and (b) makes it possible to clean
2055 up all allocated state using "CRYPTO_cleanup_all_ex_data()". W.r.t. (b)
2056 such data would previously have always leaked in application code and
2057 workarounds were in place to make the memory debugging turn a blind eye
2058 to it. Application code that doesn't use this new function will still
2059 leak as before, but their memory debugging output will announce it now
2060 rather than letting it slide.
2062 Besides the addition of CRYPTO_cleanup_all_ex_data(), another API change
2063 induced by the "ex_data" overhaul is that X509_STORE_CTX_init() now
2064 has a return value to indicate success or failure.
2067 *) Make it possible to replace the underlying "ERR" functions such that the
2068 global state (2 LHASH tables and 2 locks) is only used by the "default"
2069 implementation. This change also adds two functions to "get" and "set"
2070 the implementation prior to it being automatically set the first time
2071 any other ERR function takes place. Ie. an application can call "get",
2072 pass the return value to a module it has just loaded, and that module
2073 can call its own "set" function using that value. This means the
2074 module's "ERR" operations will use (and modify) the error state in the
2075 application and not in its own statically linked copy of OpenSSL code.
2078 *) Give DH, DSA, and RSA types their own "**_up_ref()" function to increment
2079 reference counts. This performs normal REF_PRINT/REF_CHECK macros on
2080 the operation, and provides a more encapsulated way for external code
2081 (crypto/evp/ and ssl/) to do this. Also changed the evp and ssl code
2082 to use these functions rather than manually incrementing the counts.
2084 Also rename "DSO_up()" function to more descriptive "DSO_up_ref()".
2087 *) Add EVP test program.
2090 *) Add symmetric cipher support to ENGINE. Expect the API to change!
2093 *) New CRL functions: X509_CRL_set_version(), X509_CRL_set_issuer_name()
2094 X509_CRL_set_lastUpdate(), X509_CRL_set_nextUpdate(), X509_CRL_sort(),
2095 X509_REVOKED_set_serialNumber(), and X509_REVOKED_set_revocationDate().
2096 These allow a CRL to be built without having to access X509_CRL fields
2097 directly. Modify 'ca' application to use new functions.
2100 *) Move SSL_OP_TLS_ROLLBACK_BUG out of the SSL_OP_ALL list of recommended
2101 bug workarounds. Rollback attack detection is a security feature.
2102 The problem will only arise on OpenSSL servers when TLSv1 is not
2103 available (sslv3_server_method() or SSL_OP_NO_TLSv1).
2104 Software authors not wanting to support TLSv1 will have special reasons
2105 for their choice and can explicitly enable this option.
2106 [Bodo Moeller, Lutz Jaenicke]
2108 *) Rationalise EVP so it can be extended: don't include a union of
2109 cipher/digest structures, add init/cleanup functions for EVP_MD_CTX
2110 (similar to those existing for EVP_CIPHER_CTX).
2115 EVP_MD_CTX_init(&md); /* new function call */
2116 EVP_DigestInit(&md, EVP_sha1());
2117 EVP_DigestUpdate(&md, in, len);
2118 EVP_DigestFinal(&md, out, NULL);
2119 EVP_MD_CTX_cleanup(&md); /* new function call */
2123 *) Make DES key schedule conform to the usual scheme, as well as
2124 correcting its structure. This means that calls to DES functions
2125 now have to pass a pointer to a des_key_schedule instead of a
2126 plain des_key_schedule (which was actually always a pointer
2129 des_key_schedule ks;
2131 des_set_key_checked(..., &ks);
2132 des_ncbc_encrypt(..., &ks, ...);
2134 (Note that a later change renames 'des_...' into 'DES_...'.)
2137 *) Initial reduction of linker bloat: the use of some functions, such as
2138 PEM causes large amounts of unused functions to be linked in due to
2139 poor organisation. For example pem_all.c contains every PEM function
2140 which has a knock on effect of linking in large amounts of (unused)
2141 ASN1 code. Grouping together similar functions and splitting unrelated
2142 functions prevents this.
2145 *) Cleanup of EVP macros.
2148 *) Change historical references to {NID,SN,LN}_des_ede and ede3 to add the
2149 correct _ecb suffix.
2152 *) Add initial OCSP responder support to ocsp application. The
2153 revocation information is handled using the text based index
2154 use by the ca application. The responder can either handle
2155 requests generated internally, supplied in files (for example
2156 via a CGI script) or using an internal minimal server.
2159 *) Add configuration choices to get zlib compression for TLS.
2162 *) Changes to Kerberos SSL for RFC 2712 compliance:
2163 1. Implemented real KerberosWrapper, instead of just using
2164 KRB5 AP_REQ message. [Thanks to Simon Wilkinson <sxw@sxw.org.uk>]
2165 2. Implemented optional authenticator field of KerberosWrapper.
2167 Added openssl-style ASN.1 macros for Kerberos ticket, ap_req,
2168 and authenticator structs; see crypto/krb5/.
2170 Generalized Kerberos calls to support multiple Kerberos libraries.
2171 [Vern Staats <staatsvr@asc.hpc.mil>,
2172 Jeffrey Altman <jaltman@columbia.edu>
2173 via Richard Levitte]
2175 *) Cause 'openssl speed' to use fully hard-coded DSA keys as it
2176 already does with RSA. testdsa.h now has 'priv_key/pub_key'
2177 values for each of the key sizes rather than having just
2178 parameters (and 'speed' generating keys each time).
2181 *) Speed up EVP routines.
2184 type 8 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
2185 des-cbc 4408.85k 5560.51k 5778.46k 5862.20k 5825.16k
2186 des-cbc 4389.55k 5571.17k 5792.23k 5846.91k 5832.11k
2187 des-cbc 4394.32k 5575.92k 5807.44k 5848.37k 5841.30k
2189 des-cbc 3482.66k 5069.49k 5496.39k 5614.16k 5639.28k
2190 des-cbc 3480.74k 5068.76k 5510.34k 5609.87k 5635.52k
2191 des-cbc 3483.72k 5067.62k 5504.60k 5708.01k 5724.80k
2194 des-cbc 4660.16k 5650.19k 5807.19k 5827.13k 5783.32k
2196 des-cbc 3624.96k 5258.21k 5530.91k 5624.30k 5628.26k
2199 *) Added the OS2-EMX target.
2200 ["Brian Havard" <brianh@kheldar.apana.org.au> and Richard Levitte]
2202 *) Rewrite apps to use NCONF routines instead of the old CONF. New functions
2203 to support NCONF routines in extension code. New function CONF_set_nconf()
2204 to allow functions which take an NCONF to also handle the old LHASH
2205 structure: this means that the old CONF compatible routines can be
2206 retained (in particular wrt extensions) without having to duplicate the
2207 code. New function X509V3_add_ext_nconf_sk to add extensions to a stack.
2210 *) Enhance the general user interface with mechanisms for inner control
2211 and with possibilities to have yes/no kind of prompts.
2214 *) Change all calls to low level digest routines in the library and
2215 applications to use EVP. Add missing calls to HMAC_cleanup() and
2216 don't assume HMAC_CTX can be copied using memcpy().
2217 [Verdon Walker <VWalker@novell.com>, Steve Henson]
2219 *) Add the possibility to control engines through control names but with
2220 arbitrary arguments instead of just a string.
2221 Change the key loaders to take a UI_METHOD instead of a callback
2222 function pointer. NOTE: this breaks binary compatibility with earlier
2223 versions of OpenSSL [engine].
2224 Adapt the nCipher code for these new conditions and add a card insertion
2228 *) Enhance the general user interface with mechanisms to better support
2229 dialog box interfaces, application-defined prompts, the possibility
2230 to use defaults (for example default passwords from somewhere else)
2231 and interrupts/cancellations.
2234 *) Tidy up PKCS#12 attribute handling. Add support for the CSP name
2235 attribute in PKCS#12 files, add new -CSP option to pkcs12 utility.
2238 *) Fix a memory leak in 'sk_dup()' in the case reallocation fails. (Also
2239 tidy up some unnecessarily weird code in 'sk_new()').
2240 [Geoff, reported by Diego Tartara <dtartara@novamens.com>]
2242 *) Change the key loading routines for ENGINEs to use the same kind
2243 callback (pem_password_cb) as all other routines that need this
2247 *) Increase ENTROPY_NEEDED to 32 bytes, as Rijndael can operate with
2248 256 bit (=32 byte) keys. Of course seeding with more entropy bytes
2249 than this minimum value is recommended.
2252 *) New random seeder for OpenVMS, using the system process statistics
2253 that are easily reachable.
2256 *) Windows apparently can't transparently handle global
2257 variables defined in DLLs. Initialisations such as:
2259 const ASN1_ITEM *it = &ASN1_INTEGER_it;
2261 wont compile. This is used by the any applications that need to
2262 declare their own ASN1 modules. This was fixed by adding the option
2263 EXPORT_VAR_AS_FN to all Win32 platforms, although this isn't strictly
2264 needed for static libraries under Win32.
2267 *) New functions X509_PURPOSE_set() and X509_TRUST_set() to handle
2268 setting of purpose and trust fields. New X509_STORE trust and
2269 purpose functions and tidy up setting in other SSL functions.
2272 *) Add copies of X509_STORE_CTX fields and callbacks to X509_STORE
2273 structure. These are inherited by X509_STORE_CTX when it is
2274 initialised. This allows various defaults to be set in the
2275 X509_STORE structure (such as flags for CRL checking and custom
2276 purpose or trust settings) for functions which only use X509_STORE_CTX
2277 internally such as S/MIME.
2279 Modify X509_STORE_CTX_purpose_inherit() so it only sets purposes and
2280 trust settings if they are not set in X509_STORE. This allows X509_STORE
2281 purposes and trust (in S/MIME for example) to override any set by default.
2283 Add command line options for CRL checking to smime, s_client and s_server
2287 *) Initial CRL based revocation checking. If the CRL checking flag(s)
2288 are set then the CRL is looked up in the X509_STORE structure and
2289 its validity and signature checked, then if the certificate is found
2290 in the CRL the verify fails with a revoked error.
2292 Various new CRL related callbacks added to X509_STORE_CTX structure.
2294 Command line options added to 'verify' application to support this.
2296 This needs some additional work, such as being able to handle multiple
2297 CRLs with different times, extension based lookup (rather than just
2298 by subject name) and ultimately more complete V2 CRL extension
2302 *) Add a general user interface API (crypto/ui/). This is designed
2303 to replace things like des_read_password and friends (backward
2304 compatibility functions using this new API are provided).
2305 The purpose is to remove prompting functions from the DES code
2306 section as well as provide for prompting through dialog boxes in
2307 a window system and the like.
2310 *) Add "ex_data" support to ENGINE so implementations can add state at a
2311 per-structure level rather than having to store it globally.
2314 *) Make it possible for ENGINE structures to be copied when retrieved by
2315 ENGINE_by_id() if the ENGINE specifies a new flag: ENGINE_FLAGS_BY_ID_COPY.
2316 This causes the "original" ENGINE structure to act like a template,
2317 analogous to the RSA vs. RSA_METHOD type of separation. Because of this
2318 operational state can be localised to each ENGINE structure, despite the
2319 fact they all share the same "methods". New ENGINE structures returned in
2320 this case have no functional references and the return value is the single
2321 structural reference. This matches the single structural reference returned
2322 by ENGINE_by_id() normally, when it is incremented on the pre-existing
2326 *) Fix ASN1 decoder when decoding type ANY and V_ASN1_OTHER: since this
2327 needs to match any other type at all we need to manually clear the
2331 *) Changes to the "openssl engine" utility to include;
2332 - verbosity levels ('-v', '-vv', and '-vvv') that provide information
2333 about an ENGINE's available control commands.
2334 - executing control commands from command line arguments using the
2335 '-pre' and '-post' switches. '-post' is only used if '-t' is
2336 specified and the ENGINE is successfully initialised. The syntax for
2337 the individual commands are colon-separated, for example;
2338 openssl engine chil -pre FORK_CHECK:0 -pre SO_PATH:/lib/test.so
2341 *) New dynamic control command support for ENGINEs. ENGINEs can now
2342 declare their own commands (numbers), names (strings), descriptions,
2343 and input types for run-time discovery by calling applications. A
2344 subset of these commands are implicitly classed as "executable"
2345 depending on their input type, and only these can be invoked through
2346 the new string-based API function ENGINE_ctrl_cmd_string(). (Eg. this
2347 can be based on user input, config files, etc). The distinction is
2348 that "executable" commands cannot return anything other than a boolean
2349 result and can only support numeric or string input, whereas some
2350 discoverable commands may only be for direct use through
2351 ENGINE_ctrl(), eg. supporting the exchange of binary data, function
2352 pointers, or other custom uses. The "executable" commands are to
2353 support parameterisations of ENGINE behaviour that can be
2354 unambiguously defined by ENGINEs and used consistently across any
2355 OpenSSL-based application. Commands have been added to all the
2356 existing hardware-supporting ENGINEs, noticeably "SO_PATH" to allow
2357 control over shared-library paths without source code alterations.
2360 *) Changed all ENGINE implementations to dynamically allocate their
2361 ENGINEs rather than declaring them statically. Apart from this being
2362 necessary with the removal of the ENGINE_FLAGS_MALLOCED distinction,
2363 this also allows the implementations to compile without using the
2364 internal engine_int.h header.
2367 *) Minor adjustment to "rand" code. RAND_get_rand_method() now returns a
2368 'const' value. Any code that should be able to modify a RAND_METHOD
2369 should already have non-const pointers to it (ie. they should only
2370 modify their own ones).
2373 *) Made a variety of little tweaks to the ENGINE code.
2374 - "atalla" and "ubsec" string definitions were moved from header files
2375 to C code. "nuron" string definitions were placed in variables
2376 rather than hard-coded - allowing parameterisation of these values
2377 later on via ctrl() commands.
2378 - Removed unused "#if 0"'d code.
2379 - Fixed engine list iteration code so it uses ENGINE_free() to release
2380 structural references.
2381 - Constified the RAND_METHOD element of ENGINE structures.
2382 - Constified various get/set functions as appropriate and added
2383 missing functions (including a catch-all ENGINE_cpy that duplicates
2384 all ENGINE values onto a new ENGINE except reference counts/state).
2385 - Removed NULL parameter checks in get/set functions. Setting a method
2386 or function to NULL is a way of cancelling out a previously set
2387 value. Passing a NULL ENGINE parameter is just plain stupid anyway
2388 and doesn't justify the extra error symbols and code.
2389 - Deprecate the ENGINE_FLAGS_MALLOCED define and move the area for
2390 flags from engine_int.h to engine.h.
2391 - Changed prototypes for ENGINE handler functions (init(), finish(),
2392 ctrl(), key-load functions, etc) to take an (ENGINE*) parameter.
2395 *) Implement binary inversion algorithm for BN_mod_inverse in addition
2396 to the algorithm using long division. The binary algorithm can be
2397 used only if the modulus is odd. On 32-bit systems, it is faster
2398 only for relatively small moduli (roughly 20-30% for 128-bit moduli,
2399 roughly 5-15% for 256-bit moduli), so we use it only for moduli
2400 up to 450 bits. In 64-bit environments, the binary algorithm
2401 appears to be advantageous for much longer moduli; here we use it
2402 for moduli up to 2048 bits.
2405 *) Rewrite CHOICE field setting in ASN1_item_ex_d2i(). The old code
2406 could not support the combine flag in choice fields.
2409 *) Add a 'copy_extensions' option to the 'ca' utility. This copies
2410 extensions from a certificate request to the certificate.
2413 *) Allow multiple 'certopt' and 'nameopt' options to be separated
2414 by commas. Add 'namopt' and 'certopt' options to the 'ca' config
2415 file: this allows the display of the certificate about to be
2416 signed to be customised, to allow certain fields to be included
2417 or excluded and extension details. The old system didn't display
2418 multicharacter strings properly, omitted fields not in the policy
2419 and couldn't display additional details such as extensions.
2422 *) Function EC_POINTs_mul for multiple scalar multiplication
2423 of an arbitrary number of elliptic curve points
2424 \sum scalars[i]*points[i],
2425 optionally including the generator defined for the EC_GROUP:
2426 scalar*generator + \sum scalars[i]*points[i].
2428 EC_POINT_mul is a simple wrapper function for the typical case
2429 that the point list has just one item (besides the optional
2433 *) First EC_METHODs for curves over GF(p):
2435 EC_GFp_simple_method() uses the basic BN_mod_mul and BN_mod_sqr
2436 operations and provides various method functions that can also
2437 operate with faster implementations of modular arithmetic.
2439 EC_GFp_mont_method() reuses most functions that are part of
2440 EC_GFp_simple_method, but uses Montgomery arithmetic.
2442 [Bodo Moeller; point addition and point doubling
2443 implementation directly derived from source code provided by
2444 Lenka Fibikova <fibikova@exp-math.uni-essen.de>]
2446 *) Framework for elliptic curves (crypto/ec/ec.h, crypto/ec/ec_lcl.h,
2447 crypto/ec/ec_lib.c):
2449 Curves are EC_GROUP objects (with an optional group generator)
2450 based on EC_METHODs that are built into the library.
2452 Points are EC_POINT objects based on EC_GROUP objects.
2454 Most of the framework would be able to handle curves over arbitrary
2455 finite fields, but as there are no obvious types for fields other
2456 than GF(p), some functions are limited to that for now.
2459 *) Add the -HTTP option to s_server. It is similar to -WWW, but requires
2460 that the file contains a complete HTTP response.
2463 *) Add the ec directory to mkdef.pl and mkfiles.pl. In mkdef.pl
2464 change the def and num file printf format specifier from "%-40sXXX"
2465 to "%-39s XXX". The latter will always guarantee a space after the
2466 field while the former will cause them to run together if the field
2467 is 40 of more characters long.
2470 *) Constify the cipher and digest 'method' functions and structures
2471 and modify related functions to take constant EVP_MD and EVP_CIPHER
2475 *) Hide BN_CTX structure details in bn_lcl.h instead of publishing them
2476 in <openssl/bn.h>. Also further increase BN_CTX_NUM to 32.
2479 *) Modify EVP_Digest*() routines so they now return values. Although the
2480 internal software routines can never fail additional hardware versions
2484 *) Clean up crypto/err/err.h and change some error codes to avoid conflicts:
2486 Previously ERR_R_FATAL was too small and coincided with ERR_LIB_PKCS7
2487 (= ERR_R_PKCS7_LIB); it is now 64 instead of 32.
2490 ERR_R_NESTED_ASN1_ERROR
2492 ERR_R_MISSING_ASN1_EOS
2493 were 4 .. 9, conflicting with
2494 ERR_LIB_RSA (= ERR_R_RSA_LIB)
2496 ERR_LIB_PEM (= ERR_R_PEM_LIB).
2497 They are now 58 .. 63 (i.e., just below ERR_R_FATAL).
2499 Add new error code 'ERR_R_INTERNAL_ERROR'.
2502 *) Don't overuse locks in crypto/err/err.c: For data retrieval, CRYPTO_r_lock
2506 *) New option '-subj arg' for 'openssl req' and 'openssl ca'. This
2507 sets the subject name for a new request or supersedes the
2508 subject name in a given request. Formats that can be parsed are
2509 'CN=Some Name, OU=myOU, C=IT'
2511 'CN=Some Name/OU=myOU/C=IT'.
2513 Add options '-batch' and '-verbose' to 'openssl req'.
2514 [Massimiliano Pala <madwolf@hackmasters.net>]
2516 *) Introduce the possibility to access global variables through
2517 functions on platform were that's the best way to handle exporting
2518 global variables in shared libraries. To enable this functionality,
2519 one must configure with "EXPORT_VAR_AS_FN" or defined the C macro
2520 "OPENSSL_EXPORT_VAR_AS_FUNCTION" in crypto/opensslconf.h (the latter
2521 is normally done by Configure or something similar).
2523 To implement a global variable, use the macro OPENSSL_IMPLEMENT_GLOBAL
2524 in the source file (foo.c) like this:
2526 OPENSSL_IMPLEMENT_GLOBAL(int,foo)=1;
2527 OPENSSL_IMPLEMENT_GLOBAL(double,bar);
2529 To declare a global variable, use the macros OPENSSL_DECLARE_GLOBAL
2530 and OPENSSL_GLOBAL_REF in the header file (foo.h) like this:
2532 OPENSSL_DECLARE_GLOBAL(int,foo);
2533 #define foo OPENSSL_GLOBAL_REF(foo)
2534 OPENSSL_DECLARE_GLOBAL(double,bar);
2535 #define bar OPENSSL_GLOBAL_REF(bar)
2537 The #defines are very important, and therefore so is including the
2538 header file everywhere where the defined globals are used.
2540 The macro OPENSSL_EXPORT_VAR_AS_FUNCTION also affects the definition
2541 of ASN.1 items, but that structure is a bit different.
2543 The largest change is in util/mkdef.pl which has been enhanced with
2544 better and easier to understand logic to choose which symbols should
2545 go into the Windows .def files as well as a number of fixes and code
2546 cleanup (among others, algorithm keywords are now sorted
2547 lexicographically to avoid constant rewrites).
2550 *) In BN_div() keep a copy of the sign of 'num' before writing the
2551 result to 'rm' because if rm==num the value will be overwritten
2552 and produce the wrong result if 'num' is negative: this caused
2553 problems with BN_mod() and BN_nnmod().
2556 *) Function OCSP_request_verify(). This checks the signature on an
2557 OCSP request and verifies the signer certificate. The signer
2558 certificate is just checked for a generic purpose and OCSP request
2562 *) Add OCSP_check_validity() function to check the validity of OCSP
2563 responses. OCSP responses are prepared in real time and may only
2564 be a few seconds old. Simply checking that the current time lies
2565 between thisUpdate and nextUpdate max reject otherwise valid responses
2566 caused by either OCSP responder or client clock inaccuracy. Instead
2567 we allow thisUpdate and nextUpdate to fall within a certain period of
2568 the current time. The age of the response can also optionally be
2569 checked. Two new options -validity_period and -status_age added to
2573 *) If signature or public key algorithm is unrecognized print out its
2574 OID rather that just UNKNOWN.
2577 *) Change OCSP_cert_to_id() to tolerate a NULL subject certificate and
2578 OCSP_cert_id_new() a NULL serialNumber. This allows a partial certificate
2579 ID to be generated from the issuer certificate alone which can then be
2580 passed to OCSP_id_issuer_cmp().
2583 *) New compilation option ASN1_ITEM_FUNCTIONS. This causes the new
2584 ASN1 modules to export functions returning ASN1_ITEM pointers
2585 instead of the ASN1_ITEM structures themselves. This adds several
2586 new macros which allow the underlying ASN1 function/structure to
2587 be accessed transparently. As a result code should not use ASN1_ITEM
2588 references directly (such as &X509_it) but instead use the relevant
2589 macros (such as ASN1_ITEM_rptr(X509)). This option is to allow
2590 use of the new ASN1 code on platforms where exporting structures
2591 is problematical (for example in shared libraries) but exporting
2592 functions returning pointers to structures is not.
2595 *) Add support for overriding the generation of SSL/TLS session IDs.
2596 These callbacks can be registered either in an SSL_CTX or per SSL.
2597 The purpose of this is to allow applications to control, if they wish,
2598 the arbitrary values chosen for use as session IDs, particularly as it
2599 can be useful for session caching in multiple-server environments. A
2600 command-line switch for testing this (and any client code that wishes
2601 to use such a feature) has been added to "s_server".
2602 [Geoff Thorpe, Lutz Jaenicke]
2604 *) Modify mkdef.pl to recognise and parse preprocessor conditionals
2605 of the form '#if defined(...) || defined(...) || ...' and
2606 '#if !defined(...) && !defined(...) && ...'. This also avoids
2607 the growing number of special cases it was previously handling.
2610 *) Make all configuration macros available for application by making
2611 sure they are available in opensslconf.h, by giving them names starting
2612 with "OPENSSL_" to avoid conflicts with other packages and by making
2613 sure e_os2.h will cover all platform-specific cases together with
2615 Additionally, it is now possible to define configuration/platform-
2616 specific names (called "system identities"). In the C code, these
2617 are prefixed with "OPENSSL_SYSNAME_". e_os2.h will create another
2618 macro with the name beginning with "OPENSSL_SYS_", which is determined
2619 from "OPENSSL_SYSNAME_*" or compiler-specific macros depending on
2623 *) New option -set_serial to 'req' and 'x509' this allows the serial
2624 number to use to be specified on the command line. Previously self
2625 signed certificates were hard coded with serial number 0 and the
2626 CA options of 'x509' had to use a serial number in a file which was
2630 *) New options to 'ca' utility to support V2 CRL entry extensions.
2631 Currently CRL reason, invalidity date and hold instruction are
2632 supported. Add new CRL extensions to V3 code and some new objects.
2635 *) New function EVP_CIPHER_CTX_set_padding() this is used to
2636 disable standard block padding (aka PKCS#5 padding) in the EVP
2637 API, which was previously mandatory. This means that the data is
2638 not padded in any way and so the total length much be a multiple
2639 of the block size, otherwise an error occurs.
2642 *) Initial (incomplete) OCSP SSL support.
2645 *) New function OCSP_parse_url(). This splits up a URL into its host,
2646 port and path components: primarily to parse OCSP URLs. New -url
2647 option to ocsp utility.
2650 *) New nonce behavior. The return value of OCSP_check_nonce() now
2651 reflects the various checks performed. Applications can decide
2652 whether to tolerate certain situations such as an absent nonce
2653 in a response when one was present in a request: the ocsp application
2654 just prints out a warning. New function OCSP_add1_basic_nonce()
2655 this is to allow responders to include a nonce in a response even if
2656 the request is nonce-less.
2659 *) Disable stdin buffering in load_cert (apps/apps.c) so that no certs are
2660 skipped when using openssl x509 multiple times on a single input file,
2661 e.g. "(openssl x509 -out cert1; openssl x509 -out cert2) <certs".
2664 *) Make ASN1_UTCTIME_set_string() and ASN1_GENERALIZEDTIME_set_string()
2665 set string type: to handle setting ASN1_TIME structures. Fix ca
2666 utility to correctly initialize revocation date of CRLs.
2669 *) New option SSL_OP_CIPHER_SERVER_PREFERENCE allows the server to override
2670 the clients preferred ciphersuites and rather use its own preferences.
2671 Should help to work around M$ SGC (Server Gated Cryptography) bug in
2672 Internet Explorer by ensuring unchanged hash method during stepup.
2673 (Also replaces the broken/deactivated SSL_OP_NON_EXPORT_FIRST option.)
2676 *) Make mkdef.pl recognise all DECLARE_ASN1 macros, change rijndael
2677 to aes and add a new 'exist' option to print out symbols that don't
2681 *) Additional options to ocsp utility to allow flags to be set and
2682 additional certificates supplied.
2685 *) Add the option -VAfile to 'openssl ocsp', so the user can give the
2686 OCSP client a number of certificate to only verify the response
2690 *) Update Rijndael code to version 3.0 and change EVP AES ciphers to
2691 handle the new API. Currently only ECB, CBC modes supported. Add new
2694 Add TLS AES ciphersuites as described in RFC3268, "Advanced
2695 Encryption Standard (AES) Ciphersuites for Transport Layer
2696 Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
2697 not enabled by default and were not part of the "ALL" ciphersuite
2698 alias because they were not yet official; they could be
2699 explicitly requested by specifying the "AESdraft" ciphersuite
2700 group alias. In the final release of OpenSSL 0.9.7, the group
2701 alias is called "AES" and is part of "ALL".)
2702 [Ben Laurie, Steve Henson, Bodo Moeller]
2704 *) New function OCSP_copy_nonce() to copy nonce value (if present) from
2705 request to response.
2708 *) Functions for OCSP responders. OCSP_request_onereq_count(),
2709 OCSP_request_onereq_get0(), OCSP_onereq_get0_id() and OCSP_id_get0_info()
2710 extract information from a certificate request. OCSP_response_create()
2711 creates a response and optionally adds a basic response structure.
2712 OCSP_basic_add1_status() adds a complete single response to a basic
2713 response and returns the OCSP_SINGLERESP structure just added (to allow
2714 extensions to be included for example). OCSP_basic_add1_cert() adds a
2715 certificate to a basic response and OCSP_basic_sign() signs a basic
2716 response with various flags. New helper functions ASN1_TIME_check()
2717 (checks validity of ASN1_TIME structure) and ASN1_TIME_to_generalizedtime()
2718 (converts ASN1_TIME to GeneralizedTime).
2721 *) Various new functions. EVP_Digest() combines EVP_Digest{Init,Update,Final}()
2722 in a single operation. X509_get0_pubkey_bitstr() extracts the public_key
2723 structure from a certificate. X509_pubkey_digest() digests the public_key
2724 contents: this is used in various key identifiers.
2727 *) Make sk_sort() tolerate a NULL argument.
2728 [Steve Henson reported by Massimiliano Pala <madwolf@comune.modena.it>]
2730 *) New OCSP verify flag OCSP_TRUSTOTHER. When set the "other" certificates
2731 passed by the function are trusted implicitly. If any of them signed the
2732 response then it is assumed to be valid and is not verified.
2735 *) In PKCS7_set_type() initialise content_type in PKCS7_ENC_CONTENT
2736 to data. This was previously part of the PKCS7 ASN1 code. This
2737 was causing problems with OpenSSL created PKCS#12 and PKCS#7 structures.
2738 [Steve Henson, reported by Kenneth R. Robinette
2739 <support@securenetterm.com>]
2741 *) Add CRYPTO_push_info() and CRYPTO_pop_info() calls to new ASN1
2742 routines: without these tracing memory leaks is very painful.
2743 Fix leaks in PKCS12 and PKCS7 routines.
2746 *) Make X509_time_adj() cope with the new behaviour of ASN1_TIME_new().
2747 Previously it initialised the 'type' argument to V_ASN1_UTCTIME which
2748 effectively meant GeneralizedTime would never be used. Now it
2749 is initialised to -1 but X509_time_adj() now has to check the value
2750 and use ASN1_TIME_set() if the value is not V_ASN1_UTCTIME or
2751 V_ASN1_GENERALIZEDTIME, without this it always uses GeneralizedTime.
2752 [Steve Henson, reported by Kenneth R. Robinette
2753 <support@securenetterm.com>]
2755 *) Fixes to BN_to_ASN1_INTEGER when bn is zero. This would previously
2756 result in a zero length in the ASN1_INTEGER structure which was
2757 not consistent with the structure when d2i_ASN1_INTEGER() was used
2758 and would cause ASN1_INTEGER_cmp() to fail. Enhance s2i_ASN1_INTEGER()
2759 to cope with hex and negative integers. Fix bug in i2a_ASN1_INTEGER()
2760 where it did not print out a minus for negative ASN1_INTEGER.
2763 *) Add summary printout to ocsp utility. The various functions which
2764 convert status values to strings have been renamed to:
2765 OCSP_response_status_str(), OCSP_cert_status_str() and
2766 OCSP_crl_reason_str() and are no longer static. New options
2767 to verify nonce values and to disable verification. OCSP response
2768 printout format cleaned up.
2771 *) Add additional OCSP certificate checks. These are those specified
2772 in RFC2560. This consists of two separate checks: the CA of the
2773 certificate being checked must either be the OCSP signer certificate
2774 or the issuer of the OCSP signer certificate. In the latter case the
2775 OCSP signer certificate must contain the OCSP signing extended key
2776 usage. This check is performed by attempting to match the OCSP
2777 signer or the OCSP signer CA to the issuerNameHash and issuerKeyHash
2778 in the OCSP_CERTID structures of the response.
2781 *) Initial OCSP certificate verification added to OCSP_basic_verify()
2782 and related routines. This uses the standard OpenSSL certificate
2783 verify routines to perform initial checks (just CA validity) and
2784 to obtain the certificate chain. Then additional checks will be
2785 performed on the chain. Currently the root CA is checked to see
2786 if it is explicitly trusted for OCSP signing. This is used to set
2787 a root CA as a global signing root: that is any certificate that
2788 chains to that CA is an acceptable OCSP signing certificate.
2791 *) New '-extfile ...' option to 'openssl ca' for reading X.509v3
2792 extensions from a separate configuration file.
2793 As when reading extensions from the main configuration file,
2794 the '-extensions ...' option may be used for specifying the
2796 [Massimiliano Pala <madwolf@comune.modena.it>]
2798 *) New OCSP utility. Allows OCSP requests to be generated or
2799 read. The request can be sent to a responder and the output
2800 parsed, outputed or printed in text form. Not complete yet:
2801 still needs to check the OCSP response validity.
2804 *) New subcommands for 'openssl ca':
2805 'openssl ca -status <serial>' prints the status of the cert with
2806 the given serial number (according to the index file).
2807 'openssl ca -updatedb' updates the expiry status of certificates
2809 [Massimiliano Pala <madwolf@comune.modena.it>]
2811 *) New '-newreq-nodes' command option to CA.pl. This is like
2812 '-newreq', but calls 'openssl req' with the '-nodes' option
2813 so that the resulting key is not encrypted.
2814 [Damien Miller <djm@mindrot.org>]
2816 *) New configuration for the GNU Hurd.
2817 [Jonathan Bartlett <johnnyb@wolfram.com> via Richard Levitte]
2819 *) Initial code to implement OCSP basic response verify. This
2820 is currently incomplete. Currently just finds the signer's
2821 certificate and verifies the signature on the response.
2824 *) New SSLeay_version code SSLEAY_DIR to determine the compiled-in
2825 value of OPENSSLDIR. This is available via the new '-d' option
2826 to 'openssl version', and is also included in 'openssl version -a'.
2829 *) Allowing defining memory allocation callbacks that will be given
2830 file name and line number information in additional arguments
2831 (a const char* and an int). The basic functionality remains, as
2832 well as the original possibility to just replace malloc(),
2833 realloc() and free() by functions that do not know about these
2834 additional arguments. To register and find out the current
2835 settings for extended allocation functions, the following
2836 functions are provided:
2838 CRYPTO_set_mem_ex_functions
2839 CRYPTO_set_locked_mem_ex_functions
2840 CRYPTO_get_mem_ex_functions
2841 CRYPTO_get_locked_mem_ex_functions
2843 These work the same way as CRYPTO_set_mem_functions and friends.
2844 CRYPTO_get_[locked_]mem_functions now writes 0 where such an
2845 extended allocation function is enabled.
2846 Similarly, CRYPTO_get_[locked_]mem_ex_functions writes 0 where
2847 a conventional allocation function is enabled.
2848 [Richard Levitte, Bodo Moeller]
2850 *) Finish off removing the remaining LHASH function pointer casts.
2851 There should no longer be any prototype-casting required when using
2852 the LHASH abstraction, and any casts that remain are "bugs". See
2853 the callback types and macros at the head of lhash.h for details
2854 (and "OBJ_cleanup" in crypto/objects/obj_dat.c as an example).
2857 *) Add automatic query of EGD sockets in RAND_poll() for the unix variant.
2858 If /dev/[u]random devices are not available or do not return enough
2859 entropy, EGD style sockets (served by EGD or PRNGD) will automatically
2861 The locations /var/run/egd-pool, /dev/egd-pool, /etc/egd-pool, and
2862 /etc/entropy will be queried once each in this sequence, quering stops
2863 when enough entropy was collected without querying more sockets.
2866 *) Change the Unix RAND_poll() variant to be able to poll several
2867 random devices, as specified by DEVRANDOM, until a sufficient amount
2868 of data has been collected. We spend at most 10 ms on each file
2869 (select timeout) and read in non-blocking mode. DEVRANDOM now
2870 defaults to the list "/dev/urandom", "/dev/random", "/dev/srandom"
2871 (previously it was just the string "/dev/urandom"), so on typical
2872 platforms the 10 ms delay will never occur.
2873 Also separate out the Unix variant to its own file, rand_unix.c.
2874 For VMS, there's a currently-empty rand_vms.c.
2877 *) Move OCSP client related routines to ocsp_cl.c. These
2878 provide utility functions which an application needing
2879 to issue a request to an OCSP responder and analyse the
2880 response will typically need: as opposed to those which an
2881 OCSP responder itself would need which will be added later.
2883 OCSP_request_sign() signs an OCSP request with an API similar
2884 to PKCS7_sign(). OCSP_response_status() returns status of OCSP
2885 response. OCSP_response_get1_basic() extracts basic response
2886 from response. OCSP_resp_find_status(): finds and extracts status
2887 information from an OCSP_CERTID structure (which will be created
2888 when the request structure is built). These are built from lower
2889 level functions which work on OCSP_SINGLERESP structures but
2890 wont normally be used unless the application wishes to examine
2891 extensions in the OCSP response for example.
2893 Replace nonce routines with a pair of functions.
2894 OCSP_request_add1_nonce() adds a nonce value and optionally
2895 generates a random value. OCSP_check_nonce() checks the
2896 validity of the nonce in an OCSP response.
2899 *) Change function OCSP_request_add() to OCSP_request_add0_id().
2900 This doesn't copy the supplied OCSP_CERTID and avoids the
2901 need to free up the newly created id. Change return type
2902 to OCSP_ONEREQ to return the internal OCSP_ONEREQ structure.
2903 This can then be used to add extensions to the request.
2904 Deleted OCSP_request_new(), since most of its functionality
2905 is now in OCSP_REQUEST_new() (and the case insensitive name
2906 clash) apart from the ability to set the request name which
2907 will be added elsewhere.
2910 *) Update OCSP API. Remove obsolete extensions argument from
2911 various functions. Extensions are now handled using the new
2912 OCSP extension code. New simple OCSP HTTP function which
2913 can be used to send requests and parse the response.
2916 *) Fix the PKCS#7 (S/MIME) code to work with new ASN1. Two new
2917 ASN1_ITEM structures help with sign and verify. PKCS7_ATTR_SIGN
2918 uses the special reorder version of SET OF to sort the attributes
2919 and reorder them to match the encoded order. This resolves a long
2920 standing problem: a verify on a PKCS7 structure just after signing
2921 it used to fail because the attribute order did not match the
2922 encoded order. PKCS7_ATTR_VERIFY does not reorder the attributes:
2923 it uses the received order. This is necessary to tolerate some broken
2924 software that does not order SET OF. This is handled by encoding
2925 as a SEQUENCE OF but using implicit tagging (with UNIVERSAL class)
2926 to produce the required SET OF.
2929 *) Have mk1mf.pl generate the macros OPENSSL_BUILD_SHLIBCRYPTO and
2930 OPENSSL_BUILD_SHLIBSSL and use them appropriately in the header
2931 files to get correct declarations of the ASN.1 item variables.
2934 *) Rewrite of PKCS#12 code to use new ASN1 functionality. Replace many
2935 PKCS#12 macros with real functions. Fix two unrelated ASN1 bugs:
2936 asn1_check_tlen() would sometimes attempt to use 'ctx' when it was
2937 NULL and ASN1_TYPE was not dereferenced properly in asn1_ex_c2i().
2938 New ASN1 macro: DECLARE_ASN1_ITEM() which just declares the relevant
2939 ASN1_ITEM and no wrapper functions.
2942 *) New functions or ASN1_item_d2i_fp() and ASN1_item_d2i_bio(). These
2943 replace the old function pointer based I/O routines. Change most of
2944 the *_d2i_bio() and *_d2i_fp() functions to use these.
2947 *) Enhance mkdef.pl to be more accepting about spacing in C preprocessor
2948 lines, recognice more "algorithms" that can be deselected, and make
2949 it complain about algorithm deselection that isn't recognised.
2952 *) New ASN1 functions to handle dup, sign, verify, digest, pack and
2953 unpack operations in terms of ASN1_ITEM. Modify existing wrappers
2954 to use new functions. Add NO_ASN1_OLD which can be set to remove
2955 some old style ASN1 functions: this can be used to determine if old
2956 code will still work when these eventually go away.
2959 *) New extension functions for OCSP structures, these follow the
2960 same conventions as certificates and CRLs.
2963 *) New function X509V3_add1_i2d(). This automatically encodes and
2964 adds an extension. Its behaviour can be customised with various
2965 flags to append, replace or delete. Various wrappers added for
2966 certifcates and CRLs.
2969 *) Fix to avoid calling the underlying ASN1 print routine when
2970 an extension cannot be parsed. Correct a typo in the
2971 OCSP_SERVICELOC extension. Tidy up print OCSP format.
2974 *) Make mkdef.pl parse some of the ASN1 macros and add apropriate
2975 entries for variables.
2978 *) Add functionality to apps/openssl.c for detecting locking
2979 problems: As the program is single-threaded, all we have
2980 to do is register a locking callback using an array for
2981 storing which locks are currently held by the program.
2984 *) Use a lock around the call to CRYPTO_get_ex_new_index() in
2985 SSL_get_ex_data_X509_STORE_idx(), which is used in
2986 ssl_verify_cert_chain() and thus can be called at any time
2987 during TLS/SSL handshakes so that thread-safety is essential.
2988 Unfortunately, the ex_data design is not at all suited
2989 for multi-threaded use, so it probably should be abolished.
2992 *) Added Broadcom "ubsec" ENGINE to OpenSSL.
2993 [Broadcom, tweaked and integrated by Geoff Thorpe]
2995 *) Move common extension printing code to new function
2996 X509V3_print_extensions(). Reorganise OCSP print routines and
2997 implement some needed OCSP ASN1 functions. Add OCSP extensions.
3000 *) New function X509_signature_print() to remove duplication in some
3004 *) Add a special meaning when SET OF and SEQUENCE OF flags are both
3005 set (this was treated exactly the same as SET OF previously). This
3006 is used to reorder the STACK representing the structure to match the
3007 encoding. This will be used to get round a problem where a PKCS7
3008 structure which was signed could not be verified because the STACK
3009 order did not reflect the encoded order.
3012 *) Reimplement the OCSP ASN1 module using the new code.
3015 *) Update the X509V3 code to permit the use of an ASN1_ITEM structure
3016 for its ASN1 operations. The old style function pointers still exist
3017 for now but they will eventually go away.
3020 *) Merge in replacement ASN1 code from the ASN1 branch. This almost
3021 completely replaces the old ASN1 functionality with a table driven
3022 encoder and decoder which interprets an ASN1_ITEM structure describing
3023 the ASN1 module. Compatibility with the existing ASN1 API (i2d,d2i) is
3024 largely maintained. Almost all of the old asn1_mac.h macro based ASN1
3025 has also been converted to the new form.
3028 *) Change BN_mod_exp_recp so that negative moduli are tolerated
3029 (the sign is ignored). Similarly, ignore the sign in BN_MONT_CTX_set
3030 so that BN_mod_exp_mont and BN_mod_exp_mont_word work
3031 for negative moduli.
3034 *) Fix BN_uadd and BN_usub: Always return non-negative results instead
3035 of not touching the result's sign bit.
3038 *) BN_div bugfix: If the result is 0, the sign (res->neg) must not be
3042 *) Changed the LHASH code to use prototypes for callbacks, and created
3043 macros to declare and implement thin (optionally static) functions
3044 that provide type-safety and avoid function pointer casting for the
3045 type-specific callbacks.
3048 *) Added Kerberos Cipher Suites to be used with TLS, as written in
3050 [Veers Staats <staatsvr@asc.hpc.mil>,
3051 Jeffrey Altman <jaltman@columbia.edu>, via Richard Levitte]
3053 *) Reformat the FAQ so the different questions and answers can be divided
3054 in sections depending on the subject.
3057 *) Have the zlib compression code load ZLIB.DLL dynamically under
3061 *) New function BN_mod_sqrt for computing square roots modulo a prime
3062 (using the probabilistic Tonelli-Shanks algorithm unless
3063 p == 3 (mod 4) or p == 5 (mod 8), which are cases that can
3064 be handled deterministically).
3065 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3067 *) Make BN_mod_inverse faster by explicitly handling small quotients
3068 in the Euclid loop. (Speed gain about 20% for small moduli [256 or
3069 512 bits], about 30% for larger ones [1024 or 2048 bits].)
3072 *) New function BN_kronecker.
3075 *) Fix BN_gcd so that it works on negative inputs; the result is
3076 positive unless both parameters are zero.
3077 Previously something reasonably close to an infinite loop was
3078 possible because numbers could be growing instead of shrinking
3079 in the implementation of Euclid's algorithm.
3082 *) Fix BN_is_word() and BN_is_one() macros to take into account the
3083 sign of the number in question.
3085 Fix BN_is_word(a,w) to work correctly for w == 0.
3087 The old BN_is_word(a,w) macro is now called BN_abs_is_word(a,w)
3088 because its test if the absolute value of 'a' equals 'w'.
3089 Note that BN_abs_is_word does *not* handle w == 0 reliably;
3090 it exists mostly for use in the implementations of BN_is_zero(),
3091 BN_is_one(), and BN_is_word().
3094 *) New function BN_swap.
3097 *) Use BN_nnmod instead of BN_mod in crypto/bn/bn_exp.c so that
3098 the exponentiation functions are more likely to produce reasonable
3099 results on negative inputs.
3102 *) Change BN_mod_mul so that the result is always non-negative.
3103 Previously, it could be negative if one of the factors was negative;
3104 I don't think anyone really wanted that behaviour.
3107 *) Move BN_mod_... functions into new file crypto/bn/bn_mod.c
3108 (except for exponentiation, which stays in crypto/bn/bn_exp.c,
3109 and BN_mod_mul_reciprocal, which stays in crypto/bn/bn_recp.c)
3110 and add new functions:
3119 BN_mod_lshift1_quick
3123 These functions always generate non-negative results.
3125 BN_nnmod otherwise is like BN_mod (if BN_mod computes a remainder r
3126 such that |m| < r < 0, BN_nnmod will output rem + |m| instead).
3128 BN_mod_XXX_quick(r, a, [b,] m) generates the same result as
3129 BN_mod_XXX(r, a, [b,] m, ctx), but requires that a [and b]
3130 be reduced modulo m.
3131 [Lenka Fibikova <fibikova@exp-math.uni-essen.de>, Bodo Moeller]
3134 The following entry accidentily appeared in the CHANGES file
3135 distributed with OpenSSL 0.9.7. The modifications described in
3136 it do *not* apply to OpenSSL 0.9.7.
3138 *) Remove a few calls to bn_wexpand() in BN_sqr() (the one in there
3139 was actually never needed) and in BN_mul(). The removal in BN_mul()
3140 required a small change in bn_mul_part_recursive() and the addition
3141 of the functions bn_cmp_part_words(), bn_sub_part_words() and
3142 bn_add_part_words(), which do the same thing as bn_cmp_words(),
3143 bn_sub_words() and bn_add_words() except they take arrays with
3148 *) In 'openssl passwd', verify passwords read from the terminal
3149 unless the '-salt' option is used (which usually means that
3150 verification would just waste user's time since the resulting
3151 hash is going to be compared with some given password hash)
3152 or the new '-noverify' option is used.
3154 This is an incompatible change, but it does not affect
3155 non-interactive use of 'openssl passwd' (passwords on the command
3156 line, '-stdin' option, '-in ...' option) and thus should not
3160 *) Remove all references to RSAref, since there's no more need for it.
3163 *) Make DSO load along a path given through an environment variable
3164 (SHLIB_PATH) with shl_load().
3167 *) Constify the ENGINE code as a result of BIGNUM constification.
3168 Also constify the RSA code and most things related to it. In a
3169 few places, most notable in the depth of the ASN.1 code, ugly
3170 casts back to non-const were required (to be solved at a later
3174 *) Make it so the openssl application has all engines loaded by default.
3177 *) Constify the BIGNUM routines a little more.
3180 *) Add the following functions:
3182 ENGINE_load_cswift()
3184 ENGINE_load_atalla()
3186 ENGINE_load_builtin_engines()
3188 That way, an application can itself choose if external engines that
3189 are built-in in OpenSSL shall ever be used or not. The benefit is
3190 that applications won't have to be linked with libdl or other dso
3191 libraries unless it's really needed.
3193 Changed 'openssl engine' to load all engines on demand.
3194 Changed the engine header files to avoid the duplication of some
3195 declarations (they differed!).
3198 *) 'openssl engine' can now list capabilities.
3201 *) Better error reporting in 'openssl engine'.
3204 *) Never call load_dh_param(NULL) in s_server.
3207 *) Add engine application. It can currently list engines by name and
3208 identity, and test if they are actually available.
3211 *) Improve RPM specification file by forcing symbolic linking and making
3212 sure the installed documentation is also owned by root.root.
3213 [Damien Miller <djm@mindrot.org>]
3215 *) Give the OpenSSL applications more possibilities to make use of
3216 keys (public as well as private) handled by engines.
3219 *) Add OCSP code that comes from CertCo.
3222 *) Add VMS support for the Rijndael code.
3225 *) Added untested support for Nuron crypto accelerator.
3228 *) Add support for external cryptographic devices. This code was
3229 previously distributed separately as the "engine" branch.
3230 [Geoff Thorpe, Richard Levitte]
3232 *) Rework the filename-translation in the DSO code. It is now possible to
3233 have far greater control over how a "name" is turned into a filename
3234 depending on the operating environment and any oddities about the
3235 different shared library filenames on each system.
3238 *) Support threads on FreeBSD-elf in Configure.
3241 *) Fix for SHA1 assembly problem with MASM: it produces
3242 warnings about corrupt line number information when assembling
3243 with debugging information. This is caused by the overlapping
3245 [Bernd Matthes <mainbug@celocom.de>, Steve Henson]
3248 NCONF_get_number() has no error checking at all. As a replacement,
3249 NCONF_get_number_e() is defined (_e for "error checking") and is
3250 promoted strongly. The old NCONF_get_number is kept around for
3251 binary backward compatibility.
3252 Make it possible for methods to load from something other than a BIO,
3253 by providing a function pointer that is given a name instead of a BIO.
3254 For example, this could be used to load configuration data from an
3258 *) Fix for non blocking accept BIOs. Added new I/O special reason
3259 BIO_RR_ACCEPT to cover this case. Previously use of accept BIOs
3260 with non blocking I/O was not possible because no retry code was
3261 implemented. Also added new SSL code SSL_WANT_ACCEPT to cover
3265 *) Added the beginnings of Rijndael support.
3268 *) Fix for bug in DirectoryString mask setting. Add support for
3269 X509_NAME_print_ex() in 'req' and X509_print_ex() function
3270 to allow certificate printing to more controllable, additional
3271 'certopt' option to 'x509' to allow new printing options to be
3275 *) Clean old EAY MD5 hack from e_os.h.
3278 Changes between 0.9.6l and 0.9.6m [17 Mar 2004]
3280 *) Fix null-pointer assignment in do_change_cipher_spec() revealed
3281 by using the Codenomicon TLS Test Tool (CVE-2004-0079)
3282 [Joe Orton, Steve Henson]
3284 Changes between 0.9.6k and 0.9.6l [04 Nov 2003]
3286 *) Fix additional bug revealed by the NISCC test suite:
3288 Stop bug triggering large recursion when presented with
3289 certain ASN.1 tags (CVE-2003-0851)
3292 Changes between 0.9.6j and 0.9.6k [30 Sep 2003]
3294 *) Fix various bugs revealed by running the NISCC test suite:
3296 Stop out of bounds reads in the ASN1 code when presented with
3297 invalid tags (CVE-2003-0543 and CVE-2003-0544).
3299 If verify callback ignores invalid public key errors don't try to check
3300 certificate signature with the NULL public key.
3304 *) In ssl3_accept() (ssl/s3_srvr.c) only accept a client certificate
3305 if the server requested one: as stated in TLS 1.0 and SSL 3.0
3309 *) In ssl3_get_client_hello() (ssl/s3_srvr.c), tolerate additional
3310 extra data after the compression methods not only for TLS 1.0
3311 but also for SSL 3.0 (as required by the specification).
3312 [Bodo Moeller; problem pointed out by Matthias Loepfe]
3314 *) Change X509_certificate_type() to mark the key as exported/exportable
3315 when it's 512 *bits* long, not 512 bytes.
3318 Changes between 0.9.6i and 0.9.6j [10 Apr 2003]
3320 *) Countermeasure against the Klima-Pokorny-Rosa extension of
3321 Bleichbacher's attack on PKCS #1 v1.5 padding: treat
3322 a protocol version number mismatch like a decryption error
3323 in ssl3_get_client_key_exchange (ssl/s3_srvr.c).
3326 *) Turn on RSA blinding by default in the default implementation
3327 to avoid a timing attack. Applications that don't want it can call
3328 RSA_blinding_off() or use the new flag RSA_FLAG_NO_BLINDING.
3329 They would be ill-advised to do so in most cases.
3330 [Ben Laurie, Steve Henson, Geoff Thorpe, Bodo Moeller]
3332 *) Change RSA blinding code so that it works when the PRNG is not
3333 seeded (in this case, the secret RSA exponent is abused as
3334 an unpredictable seed -- if it is not unpredictable, there
3335 is no point in blinding anyway). Make RSA blinding thread-safe
3336 by remembering the creator's thread ID in rsa->blinding and
3337 having all other threads use local one-time blinding factors
3338 (this requires more computation than sharing rsa->blinding, but
3339 avoids excessive locking; and if an RSA object is not shared
3340 between threads, blinding will still be very fast).
3343 Changes between 0.9.6h and 0.9.6i [19 Feb 2003]
3345 *) In ssl3_get_record (ssl/s3_pkt.c), minimize information leaked
3346 via timing by performing a MAC computation even if incorrrect
3347 block cipher padding has been found. This is a countermeasure
3348 against active attacks where the attacker has to distinguish
3349 between bad padding and a MAC verification error. (CVE-2003-0078)
3351 [Bodo Moeller; problem pointed out by Brice Canvel (EPFL),
3352 Alain Hiltgen (UBS), Serge Vaudenay (EPFL), and
3353 Martin Vuagnoux (EPFL, Ilion)]
3355 Changes between 0.9.6g and 0.9.6h [5 Dec 2002]
3357 *) New function OPENSSL_cleanse(), which is used to cleanse a section of
3358 memory from it's contents. This is done with a counter that will
3359 place alternating values in each byte. This can be used to solve
3360 two issues: 1) the removal of calls to memset() by highly optimizing
3361 compilers, and 2) cleansing with other values than 0, since those can
3362 be read through on certain media, for example a swap space on disk.
3365 *) Bugfix: client side session caching did not work with external caching,
3366 because the session->cipher setting was not restored when reloading
3367 from the external cache. This problem was masked, when
3368 SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG (part of SSL_OP_ALL) was set.
3369 (Found by Steve Haslam <steve@araqnid.ddts.net>.)
3372 *) Fix client_certificate (ssl/s2_clnt.c): The permissible total
3373 length of the REQUEST-CERTIFICATE message is 18 .. 34, not 17 .. 33.
3374 [Zeev Lieber <zeev-l@yahoo.com>]
3376 *) Undo an undocumented change introduced in 0.9.6e which caused
3377 repeated calls to OpenSSL_add_all_ciphers() and
3378 OpenSSL_add_all_digests() to be ignored, even after calling
3382 *) Change the default configuration reader to deal with last line not
3383 being properly terminated.
3386 *) Change X509_NAME_cmp() so it applies the special rules on handling
3387 DN values that are of type PrintableString, as well as RDNs of type
3388 emailAddress where the value has the type ia5String.
3389 [stefank@valicert.com via Richard Levitte]
3391 *) Add a SSL_SESS_CACHE_NO_INTERNAL_STORE flag to take over half
3392 the job SSL_SESS_CACHE_NO_INTERNAL_LOOKUP was inconsistently
3393 doing, define a new flag (SSL_SESS_CACHE_NO_INTERNAL) to be
3394 the bitwise-OR of the two for use by the majority of applications
3395 wanting this behaviour, and update the docs. The documented
3396 behaviour and actual behaviour were inconsistent and had been
3397 changing anyway, so this is more a bug-fix than a behavioural
3399 [Geoff Thorpe, diagnosed by Nadav Har'El]
3401 *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
3402 (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
3405 *) Fix initialization code race conditions in
3406 SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
3407 SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
3408 SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
3409 TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
3410 ssl2_get_cipher_by_char(),
3411 ssl3_get_cipher_by_char().
3412 [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
3414 *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
3415 the cached sessions are flushed, as the remove_cb() might use ex_data
3416 contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
3417 (see [openssl.org #212]).
3418 [Geoff Thorpe, Lutz Jaenicke]
3420 *) Fix typo in OBJ_txt2obj which incorrectly passed the content
3421 length, instead of the encoding length to d2i_ASN1_OBJECT.
3424 Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
3426 *) [In 0.9.6g-engine release:]
3427 Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
3428 [Lynn Gazis <lgazis@rainbow.com>]
3430 Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
3432 *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
3433 and get fix the header length calculation.
3434 [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
3435 Alon Kantor <alonk@checkpoint.com> (and others),
3438 *) Use proper error handling instead of 'assertions' in buffer
3439 overflow checks added in 0.9.6e. This prevents DoS (the
3440 assertions could call abort()).
3441 [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
3443 Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
3445 *) Add various sanity checks to asn1_get_length() to reject
3446 the ASN1 length bytes if they exceed sizeof(long), will appear
3447 negative or the content length exceeds the length of the
3449 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3451 *) Fix cipher selection routines: ciphers without encryption had no flags
3452 for the cipher strength set and where therefore not handled correctly
3453 by the selection routines (PR #130).
3456 *) Fix EVP_dsa_sha macro.
3460 SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
3461 for disabling the SSL 3.0/TLS 1.0 CBC vulnerability countermeasure
3462 that was added in OpenSSL 0.9.6d.
3464 As the countermeasure turned out to be incompatible with some
3465 broken SSL implementations, the new option is part of SSL_OP_ALL.
3466 SSL_OP_ALL is usually employed when compatibility with weird SSL
3467 implementations is desired (e.g. '-bugs' option to 's_client' and
3468 's_server'), so the new option is automatically set in many
3472 *) Changes in security patch:
3474 Changes marked "(CHATS)" were sponsored by the Defense Advanced
3475 Research Projects Agency (DARPA) and Air Force Research Laboratory,
3476 Air Force Materiel Command, USAF, under agreement number
3479 *) Add various sanity checks to asn1_get_length() to reject
3480 the ASN1 length bytes if they exceed sizeof(long), will appear
3481 negative or the content length exceeds the length of the
3482 supplied buffer. (CVE-2002-0659)
3483 [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
3485 *) Assertions for various potential buffer overflows, not known to
3487 [Ben Laurie (CHATS)]
3489 *) Various temporary buffers to hold ASCII versions of integers were
3490 too small for 64 bit platforms. (CVE-2002-0655)
3491 [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
3493 *) Remote buffer overflow in SSL3 protocol - an attacker could
3494 supply an oversized session ID to a client. (CVE-2002-0656)
3495 [Ben Laurie (CHATS)]
3497 *) Remote buffer overflow in SSL2 protocol - an attacker could
3498 supply an oversized client master key. (CVE-2002-0656)
3499 [Ben Laurie (CHATS)]
3501 Changes between 0.9.6c and 0.9.6d [9 May 2002]
3503 *) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
3504 encoded as NULL) with id-dsa-with-sha1.
3505 [Nils Larsch <nla@trustcenter.de>; problem pointed out by Bodo Moeller]
3507 *) Check various X509_...() return values in apps/req.c.
3508 [Nils Larsch <nla@trustcenter.de>]
3510 *) Fix BASE64 decode (EVP_DecodeUpdate) for data with CR/LF ended lines:
3511 an end-of-file condition would erronously be flagged, when the CRLF
3512 was just at the end of a processed block. The bug was discovered when
3513 processing data through a buffering memory BIO handing the data to a
3514 BASE64-decoding BIO. Bug fund and patch submitted by Pavel Tsekov
3515 <ptsekov@syntrex.com> and Nedelcho Stanev.
3518 *) Implement a countermeasure against a vulnerability recently found
3519 in CBC ciphersuites in SSL 3.0/TLS 1.0: Send an empty fragment
3520 before application data chunks to avoid the use of known IVs
3521 with data potentially chosen by the attacker.
3524 *) Fix length checks in ssl3_get_client_hello().
3527 *) TLS/SSL library bugfix: use s->s3->in_read_app_data differently
3528 to prevent ssl3_read_internal() from incorrectly assuming that
3529 ssl3_read_bytes() found application data while handshake
3530 processing was enabled when in fact s->s3->in_read_app_data was
3531 merely automatically cleared during the initial handshake.
3532 [Bodo Moeller; problem pointed out by Arne Ansper <arne@ats.cyber.ee>]
3534 *) Fix object definitions for Private and Enterprise: they were not
3535 recognized in their shortname (=lowercase) representation. Extend
3536 obj_dat.pl to issue an error when using undefined keywords instead
3537 of silently ignoring the problem (Svenning Sorensen
3538 <sss@sss.dnsalias.net>).
3541 *) Fix DH_generate_parameters() so that it works for 'non-standard'
3542 generators, i.e. generators other than 2 and 5. (Previously, the
3543 code did not properly initialise the 'add' and 'rem' values to
3544 BN_generate_prime().)
3546 In the new general case, we do not insist that 'generator' is
3547 actually a primitive root: This requirement is rather pointless;
3548 a generator of the order-q subgroup is just as good, if not
3552 *) Map new X509 verification errors to alerts. Discovered and submitted by
3553 Tom Wu <tom@arcot.com>.
3556 *) Fix ssl3_pending() (ssl/s3_lib.c) to prevent SSL_pending() from
3557 returning non-zero before the data has been completely received
3558 when using non-blocking I/O.
3559 [Bodo Moeller; problem pointed out by John Hughes]
3561 *) Some of the ciphers missed the strength entry (SSL_LOW etc).
3562 [Ben Laurie, Lutz Jaenicke]
3564 *) Fix bug in SSL_clear(): bad sessions were not removed (found by
3565 Yoram Zahavi <YoramZ@gilian.com>).
3568 *) Add information about CygWin 1.3 and on, and preserve proper
3569 configuration for the versions before that.
3570 [Corinna Vinschen <vinschen@redhat.com> and Richard Levitte]
3572 *) Make removal from session cache (SSL_CTX_remove_session()) more robust:
3573 check whether we deal with a copy of a session and do not delete from
3574 the cache in this case. Problem reported by "Izhar Shoshani Levi"
3575 <izhar@checkpoint.com>.
3578 *) Do not store session data into the internal session cache, if it
3579 is never intended to be looked up (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP
3580 flag is set). Proposed by Aslam <aslam@funk.com>.
3583 *) Have ASN1_BIT_STRING_set_bit() really clear a bit when the requested
3587 *) [In 0.9.6d-engine release:]
3588 Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
3589 [Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
3591 *) Add the configuration target linux-s390x.
3592 [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
3594 *) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
3595 ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
3596 variable as an indication that a ClientHello message has been
3597 received. As the flag value will be lost between multiple
3598 invocations of ssl3_accept when using non-blocking I/O, the
3599 function may not be aware that a handshake has actually taken
3600 place, thus preventing a new session from being added to the
3603 To avoid this problem, we now set s->new_session to 2 instead of
3604 using a local variable.
3605 [Lutz Jaenicke, Bodo Moeller]
3607 *) Bugfix: Return -1 from ssl3_get_server_done (ssl3/s3_clnt.c)
3608 if the SSL_R_LENGTH_MISMATCH error is detected.
3609 [Geoff Thorpe, Bodo Moeller]
3611 *) New 'shared_ldflag' column in Configure platform table.
3614 *) Fix EVP_CIPHER_mode macro.
3615 ["Dan S. Camper" <dan@bti.net>]
3617 *) Fix ssl3_read_bytes (ssl/s3_pkt.c): To ignore messages of unknown
3618 type, we must throw them away by setting rr->length to 0.
3619 [D P Chang <dpc@qualys.com>]
3621 Changes between 0.9.6b and 0.9.6c [21 dec 2001]
3623 *) Fix BN_rand_range bug pointed out by Dominikus Scherkl
3624 <Dominikus.Scherkl@biodata.com>. (The previous implementation
3625 worked incorrectly for those cases where range = 10..._2 and
3626 3*range is two bits longer than range.)
3629 *) Only add signing time to PKCS7 structures if it is not already
3633 *) Fix crypto/objects/objects.h: "ld-ce" should be "id-ce",
3634 OBJ_ld_ce should be OBJ_id_ce.
3635 Also some ip-pda OIDs in crypto/objects/objects.txt were
3636 incorrect (cf. RFC 3039).
3637 [Matt Cooper, Frederic Giudicelli, Bodo Moeller]
3639 *) Release CRYPTO_LOCK_DYNLOCK when CRYPTO_destroy_dynlockid()
3640 returns early because it has nothing to do.
3641 [Andy Schneider <andy.schneider@bjss.co.uk>]
3643 *) [In 0.9.6c-engine release:]
3644 Fix mutex callback return values in crypto/engine/hw_ncipher.c.
3645 [Andy Schneider <andy.schneider@bjss.co.uk>]
3647 *) [In 0.9.6c-engine release:]
3648 Add support for Cryptographic Appliance's keyserver technology.
3649 (Use engine 'keyclient')
3650 [Cryptographic Appliances and Geoff Thorpe]
3652 *) Add a configuration entry for OS/390 Unix. The C compiler 'c89'
3653 is called via tools/c89.sh because arguments have to be
3654 rearranged (all '-L' options must appear before the first object
3656 [Richard Shapiro <rshapiro@abinitio.com>]
3658 *) [In 0.9.6c-engine release:]
3659 Add support for Broadcom crypto accelerator cards, backported
3661 [Broadcom, Nalin Dahyabhai <nalin@redhat.com>, Mark Cox]
3663 *) [In 0.9.6c-engine release:]
3664 Add support for SureWare crypto accelerator cards from
3665 Baltimore Technologies. (Use engine 'sureware')
3666 [Baltimore Technologies and Mark Cox]
3668 *) [In 0.9.6c-engine release:]
3669 Add support for crypto accelerator cards from Accelerated
3670 Encryption Processing, www.aep.ie. (Use engine 'aep')
3671 [AEP Inc. and Mark Cox]
3673 *) Add a configuration entry for gcc on UnixWare.
3674 [Gary Benson <gbenson@redhat.com>]
3676 *) Change ssl/s2_clnt.c and ssl/s2_srvr.c so that received handshake
3677 messages are stored in a single piece (fixed-length part and
3678 variable-length part combined) and fix various bugs found on the way.
3681 *) Disable caching in BIO_gethostbyname(), directly use gethostbyname()
3682 instead. BIO_gethostbyname() does not know what timeouts are
3683 appropriate, so entries would stay in cache even when they have
3685 [Bodo Moeller; problem pointed out by Rich Salz <rsalz@zolera.com>
3687 *) Change ssl23_get_client_hello (ssl/s23_srvr.c) behaviour when
3688 faced with a pathologically small ClientHello fragment that does
3689 not contain client_version: Instead of aborting with an error,
3690 simply choose the highest available protocol version (i.e.,
3691 TLS 1.0 unless it is disabled). In practice, ClientHello
3692 messages are never sent like this, but this change gives us
3693 strictly correct behaviour at least for TLS.
3696 *) Fix SSL handshake functions and SSL_clear() such that SSL_clear()
3697 never resets s->method to s->ctx->method when called from within
3698 one of the SSL handshake functions.
3699 [Bodo Moeller; problem pointed out by Niko Baric]
3701 *) In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert
3702 (sent using the client's version number) if client_version is
3703 smaller than the protocol version in use. Also change
3704 ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0 if
3705 the client demanded SSL 3.0 but only TLS 1.0 is enabled; then
3706 the client will at least see that alert.
3709 *) Fix ssl3_get_message (ssl/s3_both.c) to handle message fragmentation
3713 *) Avoid infinite loop in ssl3_get_message (ssl/s3_both.c) if a
3714 client receives HelloRequest while in a handshake.
3715 [Bodo Moeller; bug noticed by Andy Schneider <andy.schneider@bjss.co.uk>]
3717 *) Bugfix in ssl3_accept (ssl/s3_srvr.c): Case SSL3_ST_SW_HELLO_REQ_C
3718 should end in 'break', not 'goto end' which circuments various
3719 cleanups done in state SSL_ST_OK. But session related stuff
3720 must be disabled for SSL_ST_OK in the case that we just sent a
3723 Also avoid some overhead by not calling ssl_init_wbio_buffer()
3724 before just sending a HelloRequest.
3725 [Bodo Moeller, Eric Rescorla <ekr@rtfm.com>]
3727 *) Fix ssl/s3_enc.c, ssl/t1_enc.c and ssl/s3_pkt.c so that we don't
3728 reveal whether illegal block cipher padding was found or a MAC
3729 verification error occured. (Neither SSLerr() codes nor alerts
3730 are directly visible to potential attackers, but the information
3731 may leak via logfiles.)
3733 Similar changes are not required for the SSL 2.0 implementation
3734 because the number of padding bytes is sent in clear for SSL 2.0,
3735 and the extra bytes are just ignored. However ssl/s2_pkt.c
3736 failed to verify that the purported number of padding bytes is in
3740 *) Add OpenUNIX-8 support including shared libraries
3741 (Boyd Lynn Gerber <gerberb@zenez.com>).
3744 *) Improve RSA_padding_check_PKCS1_OAEP() check again to avoid
3745 'wristwatch attack' using huge encoding parameters (cf.
3746 James H. Manger's CRYPTO 2001 paper). Note that the
3747 RSA_PKCS1_OAEP_PADDING case of RSA_private_decrypt() does not use
3748 encoding parameters and hence was not vulnerable.
3751 *) BN_sqr() bug fix.
3752 [Ulf Möller, reported by Jim Ellis <jim.ellis@cavium.com>]
3754 *) Rabin-Miller test analyses assume uniformly distributed witnesses,
3755 so use BN_pseudo_rand_range() instead of using BN_pseudo_rand()
3756 followed by modular reduction.
3757 [Bodo Moeller; pointed out by Adam Young <AYoung1@NCSUS.JNJ.COM>]
3759 *) Add BN_pseudo_rand_range() with obvious functionality: BN_rand_range()
3760 equivalent based on BN_pseudo_rand() instead of BN_rand().
3763 *) s3_srvr.c: allow sending of large client certificate lists (> 16 kB).
3764 This function was broken, as the check for a new client hello message
3765 to handle SGC did not allow these large messages.
3766 (Tracked down by "Douglas E. Engert" <deengert@anl.gov>.)
3769 *) Add alert descriptions for TLSv1 to SSL_alert_desc_string[_long]().
3772 *) Fix buggy behaviour of BIO_get_num_renegotiates() and BIO_ctrl()
3773 for BIO_C_GET_WRITE_BUF_SIZE ("Stephen Hinton" <shinton@netopia.com>).
3776 *) Rework the configuration and shared library support for Tru64 Unix.
3777 The configuration part makes use of modern compiler features and
3778 still retains old compiler behavior for those that run older versions
3779 of the OS. The shared library support part includes a variant that
3780 uses the RPATH feature, and is available through the special
3781 configuration target "alpha-cc-rpath", which will never be selected
3783 [Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu> via Richard Levitte]
3785 *) In ssl3_get_key_exchange (ssl/s3_clnt.c), call ssl3_get_message()
3786 with the same message size as in ssl3_get_certificate_request().
3787 Otherwise, if no ServerKeyExchange message occurs, CertificateRequest
3788 messages might inadvertently be reject as too long.
3789 [Petr Lampa <lampa@fee.vutbr.cz>]
3791 *) Enhanced support for IA-64 Unix platforms (well, Linux and HP-UX).
3794 *) Modified SSL library such that the verify_callback that has been set
3795 specificly for an SSL object with SSL_set_verify() is actually being
3796 used. Before the change, a verify_callback set with this function was
3797 ignored and the verify_callback() set in the SSL_CTX at the time of
3798 the call was used. New function X509_STORE_CTX_set_verify_cb() introduced
3799 to allow the necessary settings.
3802 *) Initialize static variable in crypto/dsa/dsa_lib.c and crypto/dh/dh_lib.c
3803 explicitly to NULL, as at least on Solaris 8 this seems not always to be
3804 done automatically (in contradiction to the requirements of the C
3805 standard). This made problems when used from OpenSSH.
3808 *) In OpenSSL 0.9.6a and 0.9.6b, crypto/dh/dh_key.c ignored
3809 dh->length and always used
3811 BN_rand_range(priv_key, dh->p).
3813 BN_rand_range() is not necessary for Diffie-Hellman, and this
3814 specific range makes Diffie-Hellman unnecessarily inefficient if
3815 dh->length (recommended exponent length) is much smaller than the
3816 length of dh->p. We could use BN_rand_range() if the order of
3817 the subgroup was stored in the DH structure, but we only have
3822 BN_rand(priv_key, l, ...)
3824 where 'l' is dh->length if this is defined, or BN_num_bits(dh->p)-1
3830 RSA_eay_public_encrypt
3831 RSA_eay_private_decrypt
3832 RSA_eay_private_encrypt (signing)
3833 RSA_eay_public_decrypt (signature verification)
3835 (default implementations for RSA_public_encrypt,
3836 RSA_private_decrypt, RSA_private_encrypt, RSA_public_decrypt),
3837 always reject numbers >= n.
3840 *) In crypto/rand/md_rand.c, use a new short-time lock CRYPTO_LOCK_RAND2
3841 to synchronize access to 'locking_thread'. This is necessary on
3842 systems where access to 'locking_thread' (an 'unsigned long'
3843 variable) is not atomic.
3846 *) In crypto/rand/md_rand.c, set 'locking_thread' to current thread's ID
3847 *before* setting the 'crypto_lock_rand' flag. The previous code had
3848 a race condition if 0 is a valid thread ID.
3849 [Travis Vitek <vitek@roguewave.com>]
3851 *) Add support for shared libraries under Irix.
3852 [Albert Chin-A-Young <china@thewrittenword.com>]
3854 *) Add configuration option to build on Linux on both big-endian and
3856 [Ralf Baechle <ralf@uni-koblenz.de>]
3858 *) Add the possibility to create shared libraries on HP-UX.
3861 Changes between 0.9.6a and 0.9.6b [9 Jul 2001]
3863 *) Change ssleay_rand_bytes (crypto/rand/md_rand.c)
3864 to avoid a SSLeay/OpenSSL PRNG weakness pointed out by
3865 Markku-Juhani O. Saarinen <markku-juhani.saarinen@nokia.com>:
3866 PRNG state recovery was possible based on the output of
3867 one PRNG request appropriately sized to gain knowledge on
3868 'md' followed by enough consecutive 1-byte PRNG requests
3869 to traverse all of 'state'.
3871 1. When updating 'md_local' (the current thread's copy of 'md')
3872 during PRNG output generation, hash all of the previous
3873 'md_local' value, not just the half used for PRNG output.
3875 2. Make the number of bytes from 'state' included into the hash
3876 independent from the number of PRNG bytes requested.
3878 The first measure alone would be sufficient to avoid
3879 Markku-Juhani's attack. (Actually it had never occurred
3880 to me that the half of 'md_local' used for chaining was the
3881 half from which PRNG output bytes were taken -- I had always
3882 assumed that the secret half would be used.) The second
3883 measure makes sure that additional data from 'state' is never
3884 mixed into 'md_local' in small portions; this heuristically
3885 further strengthens the PRNG.
3888 *) Fix crypto/bn/asm/mips3.s.
3891 *) When only the key is given to "enc", the IV is undefined. Print out
3892 an error message in this case.
3895 *) Handle special case when X509_NAME is empty in X509 printing routines.
3898 *) In dsa_do_verify (crypto/dsa/dsa_ossl.c), verify that r and s are
3899 positive and less than q.
3902 *) Don't change *pointer in CRYPTO_add_lock() is add_lock_callback is
3903 used: it isn't thread safe and the add_lock_callback should handle
3905 [Paul Rose <Paul.Rose@bridge.com>]
3907 *) Verify that incoming data obeys the block size in
3908 ssl3_enc (ssl/s3_enc.c) and tls1_enc (ssl/t1_enc.c).
3912 [Ulf Möller, Bodo Möller]
3914 *) The countermeasure against Bleichbacher's attack on PKCS #1 v1.5
3915 RSA encryption was accidentally removed in s3_srvr.c in OpenSSL 0.9.5
3916 when fixing the server behaviour for backwards-compatible 'client
3917 hello' messages. (Note that the attack is impractical against
3918 SSL 3.0 and TLS 1.0 anyway because length and version checking
3919 means that the probability of guessing a valid ciphertext is
3920 around 2^-40; see section 5 in Bleichenbacher's CRYPTO '98
3923 Before 0.9.5, the countermeasure (hide the error by generating a
3924 random 'decryption result') did not work properly because
3925 ERR_clear_error() was missing, meaning that SSL_get_error() would
3926 detect the supposedly ignored error.
3928 Both problems are now fixed.
3931 *) In crypto/bio/bf_buff.c, increase DEFAULT_BUFFER_SIZE to 4096
3932 (previously it was 1024).
3935 *) Fix for compatibility mode trust settings: ignore trust settings
3936 unless some valid trust or reject settings are present.
3939 *) Fix for blowfish EVP: its a variable length cipher.
3942 *) Fix various bugs related to DSA S/MIME verification. Handle missing
3943 parameters in DSA public key structures and return an error in the
3944 DSA routines if parameters are absent.
3947 *) In versions up to 0.9.6, RAND_file_name() resorted to file ".rnd"
3948 in the current directory if neither $RANDFILE nor $HOME was set.
3949 RAND_file_name() in 0.9.6a returned NULL in this case. This has
3950 caused some confusion to Windows users who haven't defined $HOME.
3951 Thus RAND_file_name() is changed again: e_os.h can define a
3952 DEFAULT_HOME, which will be used if $HOME is not set.
3953 For Windows, we use "C:"; on other platforms, we still require
3954 environment variables.
3956 *) Move 'if (!initialized) RAND_poll()' into regions protected by
3957 CRYPTO_LOCK_RAND. This is not strictly necessary, but avoids
3958 having multiple threads call RAND_poll() concurrently.
3961 *) In crypto/rand/md_rand.c, replace 'add_do_not_lock' flag by a
3962 combination of a flag and a thread ID variable.
3963 Otherwise while one thread is in ssleay_rand_bytes (which sets the
3964 flag), *other* threads can enter ssleay_add_bytes without obeying
3965 the CRYPTO_LOCK_RAND lock (and may even illegally release the lock
3966 that they do not hold after the first thread unsets add_do_not_lock).
3969 *) Change bctest again: '-x' expressions are not available in all
3973 Changes between 0.9.6 and 0.9.6a [5 Apr 2001]
3975 *) Fix a couple of memory leaks in PKCS7_dataDecode()
3976 [Steve Henson, reported by Heyun Zheng <hzheng@atdsprint.com>]
3978 *) Change Configure and Makefiles to provide EXE_EXT, which will contain
3979 the default extension for executables, if any. Also, make the perl
3980 scripts that use symlink() to test if it really exists and use "cp"
3981 if it doesn't. All this made OpenSSL compilable and installable in
3985 *) Fix for asn1_GetSequence() for indefinite length constructed data.
3986 If SEQUENCE is length is indefinite just set c->slen to the total
3987 amount of data available.
3988 [Steve Henson, reported by shige@FreeBSD.org]
3989 [This change does not apply to 0.9.7.]
3991 *) Change bctest to avoid here-documents inside command substitution
3992 (workaround for FreeBSD /bin/sh bug).
3993 For compatibility with Ultrix, avoid shell functions (introduced
3994 in the bctest version that searches along $PATH).
3997 *) Rename 'des_encrypt' to 'des_encrypt1'. This avoids the clashes
3998 with des_encrypt() defined on some operating systems, like Solaris
4002 *) Check the result of RSA-CRT (see D. Boneh, R. DeMillo, R. Lipton:
4003 On the Importance of Eliminating Errors in Cryptographic
4004 Computations, J. Cryptology 14 (2001) 2, 101-119,
4005 http://theory.stanford.edu/~dabo/papers/faults.ps.gz).
4008 *) MIPS assembler BIGNUM division bug fix.
4011 *) Disabled incorrect Alpha assembler code.
4014 *) Fix PKCS#7 decode routines so they correctly update the length
4015 after reading an EOC for the EXPLICIT tag.
4017 [This change does not apply to 0.9.7.]
4019 *) Fix bug in PKCS#12 key generation routines. This was triggered
4020 if a 3DES key was generated with a 0 initial byte. Include
4021 PKCS12_BROKEN_KEYGEN compilation option to retain the old
4022 (but broken) behaviour.
4025 *) Enhance bctest to search for a working bc along $PATH and print
4027 [Tim Rice <tim@multitalents.net> via Richard Levitte]
4029 *) Fix memory leaks in err.c: free err_data string if necessary;
4030 don't write to the wrong index in ERR_set_error_data.
4033 *) Implement ssl23_peek (analogous to ssl23_read), which previously
4037 *) Replace rdtsc with _emit statements for VC++ version 5.
4038 [Jeremy Cooper <jeremy@baymoo.org>]
4040 *) Make it possible to reuse SSLv2 sessions.
4043 *) In copy_email() check for >= 0 as a return value for
4044 X509_NAME_get_index_by_NID() since 0 is a valid index.
4045 [Steve Henson reported by Massimiliano Pala <madwolf@opensca.org>]
4047 *) Avoid coredump with unsupported or invalid public keys by checking if
4048 X509_get_pubkey() fails in PKCS7_verify(). Fix memory leak when
4049 PKCS7_verify() fails with non detached data.
4052 *) Don't use getenv in library functions when run as setuid/setgid.
4053 New function OPENSSL_issetugid().
4056 *) Avoid false positives in memory leak detection code (crypto/mem_dbg.c)
4057 due to incorrect handling of multi-threading:
4059 1. Fix timing glitch in the MemCheck_off() portion of CRYPTO_mem_ctrl().
4061 2. Fix logical glitch in is_MemCheck_on() aka CRYPTO_is_mem_check_on().
4063 3. Count how many times MemCheck_off() has been called so that
4064 nested use can be treated correctly. This also avoids
4065 inband-signalling in the previous code (which relied on the
4066 assumption that thread ID 0 is impossible).
4069 *) Add "-rand" option also to s_client and s_server.
4072 *) Fix CPU detection on Irix 6.x.
4073 [Kurt Hockenbury <khockenb@stevens-tech.edu> and
4074 "Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4076 *) Fix X509_NAME bug which produced incorrect encoding if X509_NAME
4079 [This change does not apply to 0.9.7.]
4081 *) Use the cached encoding of an X509_NAME structure rather than
4082 copying it. This is apparently the reason for the libsafe "errors"
4083 but the code is actually correct.
4086 *) Add new function BN_rand_range(), and fix DSA_sign_setup() to prevent
4087 Bleichenbacher's DSA attack.
4088 Extend BN_[pseudo_]rand: As before, top=1 forces the highest two bits
4089 to be set and top=0 forces the highest bit to be set; top=-1 is new
4090 and leaves the highest bit random.
4091 [Ulf Moeller, Bodo Moeller]
4093 *) In the NCONF_...-based implementations for CONF_... queries
4094 (crypto/conf/conf_lib.c), if the input LHASH is NULL, avoid using
4095 a temporary CONF structure with the data component set to NULL
4096 (which gives segmentation faults in lh_retrieve).
4097 Instead, use NULL for the CONF pointer in CONF_get_string and
4098 CONF_get_number (which may use environment variables) and directly
4099 return NULL from CONF_get_section.
4102 *) Fix potential buffer overrun for EBCDIC.
4105 *) Tolerate nonRepudiation as being valid for S/MIME signing and certSign
4106 keyUsage if basicConstraints absent for a CA.
4109 *) Make SMIME_write_PKCS7() write mail header values with a format that
4110 is more generally accepted (no spaces before the semicolon), since
4111 some programs can't parse those values properly otherwise. Also make
4112 sure BIO's that break lines after each write do not create invalid
4116 *) Make the CRL encoding routines work with empty SEQUENCE OF. The
4117 macros previously used would not encode an empty SEQUENCE OF
4118 and break the signature.
4120 [This change does not apply to 0.9.7.]
4122 *) Zero the premaster secret after deriving the master secret in
4126 *) Add some EVP_add_digest_alias registrations (as found in
4127 OpenSSL_add_all_digests()) to SSL_library_init()
4128 aka OpenSSL_add_ssl_algorithms(). This provides improved
4129 compatibility with peers using X.509 certificates
4130 with unconventional AlgorithmIdentifier OIDs.
4133 *) Fix for Irix with NO_ASM.
4134 ["Bruce W. Forsberg" <bruce.forsberg@baesystems.com>]
4136 *) ./config script fixes.
4137 [Ulf Moeller, Richard Levitte]
4139 *) Fix 'openssl passwd -1'.
4142 *) Change PKCS12_key_gen_asc() so it can cope with non null
4143 terminated strings whose length is passed in the passlen
4144 parameter, for example from PEM callbacks. This was done
4145 by adding an extra length parameter to asc2uni().
4146 [Steve Henson, reported by <oddissey@samsung.co.kr>]
4148 *) Fix C code generated by 'openssl dsaparam -C': If a BN_bin2bn
4149 call failed, free the DSA structure.
4152 *) Fix to uni2asc() to cope with zero length Unicode strings.
4153 These are present in some PKCS#12 files.
4156 *) Increase s2->wbuf allocation by one byte in ssl2_new (ssl/s2_lib.c).
4157 Otherwise do_ssl_write (ssl/s2_pkt.c) will write beyond buffer limits
4158 when writing a 32767 byte record.
4159 [Bodo Moeller; problem reported by Eric Day <eday@concentric.net>]
4161 *) In RSA_eay_public_{en,ed}crypt and RSA_eay_mod_exp (rsa_eay.c),
4162 obtain lock CRYPTO_LOCK_RSA before setting rsa->_method_mod_{n,p,q}.
4164 (RSA objects have a reference count access to which is protected
4165 by CRYPTO_LOCK_RSA [see rsa_lib.c, s3_srvr.c, ssl_cert.c, ssl_rsa.c],
4166 so they are meant to be shared between threads.)
4167 [Bodo Moeller, Geoff Thorpe; original patch submitted by
4168 "Reddie, Steven" <Steven.Reddie@ca.com>]
4170 *) Fix a deadlock in CRYPTO_mem_leaks().
4173 *) Use better test patterns in bntest.
4176 *) rand_win.c fix for Borland C.
4179 *) BN_rshift bugfix for n == 0.
4182 *) Add a 'bctest' script that checks for some known 'bc' bugs
4183 so that 'make test' does not abort just because 'bc' is broken.
4186 *) Store verify_result within SSL_SESSION also for client side to
4187 avoid potential security hole. (Re-used sessions on the client side
4188 always resulted in verify_result==X509_V_OK, not using the original
4189 result of the server certificate verification.)
4192 *) Fix ssl3_pending: If the record in s->s3->rrec is not of type
4193 SSL3_RT_APPLICATION_DATA, return 0.
4194 Similarly, change ssl2_pending to return 0 if SSL_in_init(s) is true.
4198 Both ssl2_peek and ssl3_peek, which were totally broken in earlier
4199 releases, have been re-implemented by renaming the previous
4200 implementations of ssl2_read and ssl3_read to ssl2_read_internal
4201 and ssl3_read_internal, respectively, and adding 'peek' parameters
4202 to them. The new ssl[23]_{read,peek} functions are calls to
4203 ssl[23]_read_internal with the 'peek' flag set appropriately.
4204 A 'peek' parameter has also been added to ssl3_read_bytes, which
4205 does the actual work for ssl3_read_internal.
4208 *) Initialise "ex_data" member of RSA/DSA/DH structures prior to calling
4209 the method-specific "init()" handler. Also clean up ex_data after
4210 calling the method-specific "finish()" handler. Previously, this was
4211 happening the other way round.
4214 *) Increase BN_CTX_NUM (the number of BIGNUMs in a BN_CTX) to 16.
4215 The previous value, 12, was not always sufficient for BN_mod_exp().
4218 *) Make sure that shared libraries get the internal name engine with
4219 the full version number and not just 0. This should mark the
4220 shared libraries as not backward compatible. Of course, this should
4221 be changed again when we can guarantee backward binary compatibility.
4224 *) Fix typo in get_cert_by_subject() in by_dir.c
4225 [Jean-Marc Desperrier <jean-marc.desperrier@certplus.com>]
4227 *) Rework the system to generate shared libraries:
4229 - Make note of the expected extension for the shared libraries and
4230 if there is a need for symbolic links from for example libcrypto.so.0
4231 to libcrypto.so.0.9.7. There is extended info in Configure for
4234 - Make as few rebuilds of the shared libraries as possible.
4236 - Still avoid linking the OpenSSL programs with the shared libraries.
4238 - When installing, install the shared libraries separately from the
4242 *) Fix SSL_CTX_set_read_ahead macro to actually use its argument.
4244 Copy SSL_CTX's read_ahead flag to SSL object directly in SSL_new
4245 and not in SSL_clear because the latter is also used by the
4246 accept/connect functions; previously, the settings made by
4247 SSL_set_read_ahead would be lost during the handshake.
4248 [Bodo Moeller; problems reported by Anders Gertz <gertz@epact.se>]
4250 *) Correct util/mkdef.pl to be selective about disabled algorithms.
4251 Previously, it would create entries for disableed algorithms no
4255 *) Added several new manual pages for SSL_* function.
4258 Changes between 0.9.5a and 0.9.6 [24 Sep 2000]
4260 *) In ssl23_get_client_hello, generate an error message when faced
4261 with an initial SSL 3.0/TLS record that is too small to contain the
4262 first two bytes of the ClientHello message, i.e. client_version.
4263 (Note that this is a pathologic case that probably has never happened
4264 in real life.) The previous approach was to use the version number
4265 from the record header as a substitute; but our protocol choice
4266 should not depend on that one because it is not authenticated
4267 by the Finished messages.
4270 *) More robust randomness gathering functions for Windows.
4271 [Jeffrey Altman <jaltman@columbia.edu>]
4273 *) For compatibility reasons if the flag X509_V_FLAG_ISSUER_CHECK is
4274 not set then we don't setup the error code for issuer check errors
4275 to avoid possibly overwriting other errors which the callback does
4276 handle. If an application does set the flag then we assume it knows
4277 what it is doing and can handle the new informational codes
4281 *) Fix for a nasty bug in ASN1_TYPE handling. ASN1_TYPE is used for
4282 a general "ANY" type, as such it should be able to decode anything
4283 including tagged types. However it didn't check the class so it would
4284 wrongly interpret tagged types in the same way as their universal
4285 counterpart and unknown types were just rejected. Changed so that the
4286 tagged and unknown types are handled in the same way as a SEQUENCE:
4287 that is the encoding is stored intact. There is also a new type
4288 "V_ASN1_OTHER" which is used when the class is not universal, in this
4289 case we have no idea what the actual type is so we just lump them all
4293 *) On VMS, stdout may very well lead to a file that is written to
4294 in a record-oriented fashion. That means that every write() will
4295 write a separate record, which will be read separately by the
4296 programs trying to read from it. This can be very confusing.
4298 The solution is to put a BIO filter in the way that will buffer
4299 text until a linefeed is reached, and then write everything a
4300 line at a time, so every record written will be an actual line,
4301 not chunks of lines and not (usually doesn't happen, but I've
4302 seen it once) several lines in one record. BIO_f_linebuffer() is
4305 Currently, it's a VMS-only method, because that's where it has
4306 been tested well enough.
4309 *) Remove 'optimized' squaring variant in BN_mod_mul_montgomery,
4310 it can return incorrect results.
4311 (Note: The buggy variant was not enabled in OpenSSL 0.9.5a,
4312 but it was in 0.9.6-beta[12].)
4315 *) Disable the check for content being present when verifying detached
4316 signatures in pk7_smime.c. Some versions of Netscape (wrongly)
4317 include zero length content when signing messages.
4320 *) New BIO_shutdown_wr macro, which invokes the BIO_C_SHUTDOWN_WR
4321 BIO_ctrl (for BIO pairs).
4324 *) Add DSO method for VMS.
4327 *) Bug fix: Montgomery multiplication could produce results with the
4331 *) Add RPM specification openssl.spec and modify it to build three
4332 packages. The default package contains applications, application
4333 documentation and run-time libraries. The devel package contains
4334 include files, static libraries and function documentation. The
4335 doc package contains the contents of the doc directory. The original
4336 openssl.spec was provided by Damien Miller <djm@mindrot.org>.
4339 *) Add a large number of documentation files for many SSL routines.
4340 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
4342 *) Add a configuration entry for Sony News 4.
4343 [NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>]
4345 *) Don't set the two most significant bits to one when generating a
4346 random number < q in the DSA library.
4349 *) New SSL API mode 'SSL_MODE_AUTO_RETRY'. This disables the default
4350 behaviour that SSL_read may result in SSL_ERROR_WANT_READ (even if
4351 the underlying transport is blocking) if a handshake took place.
4352 (The default behaviour is needed by applications such as s_client
4353 and s_server that use select() to determine when to use SSL_read;
4354 but for applications that know in advance when to expect data, it
4355 just makes things more complicated.)
4358 *) Add RAND_egd_bytes(), which gives control over the number of bytes read
4362 *) Add a few more EBCDIC conditionals that make `req' and `x509'
4363 work better on such systems.
4364 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
4366 *) Add two demo programs for PKCS12_parse() and PKCS12_create().
4367 Update PKCS12_parse() so it copies the friendlyName and the
4368 keyid to the certificates aux info.
4371 *) Fix bug in PKCS7_verify() which caused an infinite loop
4372 if there was more than one signature.
4373 [Sven Uszpelkat <su@celocom.de>]
4375 *) Major change in util/mkdef.pl to include extra information
4376 about each symbol, as well as presentig variables as well
4377 as functions. This change means that there's n more need
4378 to rebuild the .num files when some algorithms are excluded.
4381 *) Allow the verify time to be set by an application,
4382 rather than always using the current time.
4385 *) Phase 2 verify code reorganisation. The certificate
4386 verify code now looks up an issuer certificate by a
4387 number of criteria: subject name, authority key id
4388 and key usage. It also verifies self signed certificates
4389 by the same criteria. The main comparison function is
4390 X509_check_issued() which performs these checks.
4392 Lot of changes were necessary in order to support this
4393 without completely rewriting the lookup code.
4395 Authority and subject key identifier are now cached.
4397 The LHASH 'certs' is X509_STORE has now been replaced
4398 by a STACK_OF(X509_OBJECT). This is mainly because an
4399 LHASH can't store or retrieve multiple objects with
4400 the same hash value.
4402 As a result various functions (which were all internal
4403 use only) have changed to handle the new X509_STORE
4404 structure. This will break anything that messed round
4405 with X509_STORE internally.
4407 The functions X509_STORE_add_cert() now checks for an
4408 exact match, rather than just subject name.
4410 The X509_STORE API doesn't directly support the retrieval
4411 of multiple certificates matching a given criteria, however
4412 this can be worked round by performing a lookup first
4413 (which will fill the cache with candidate certificates)
4414 and then examining the cache for matches. This is probably
4415 the best we can do without throwing out X509_LOOKUP
4416 entirely (maybe later...).
4418 The X509_VERIFY_CTX structure has been enhanced considerably.
4420 All certificate lookup operations now go via a get_issuer()
4421 callback. Although this currently uses an X509_STORE it
4422 can be replaced by custom lookups. This is a simple way
4423 to bypass the X509_STORE hackery necessary to make this
4424 work and makes it possible to use more efficient techniques
4425 in future. A very simple version which uses a simple
4426 STACK for its trusted certificate store is also provided
4427 using X509_STORE_CTX_trusted_stack().
4429 The verify_cb() and verify() callbacks now have equivalents
4430 in the X509_STORE_CTX structure.
4432 X509_STORE_CTX also has a 'flags' field which can be used
4433 to customise the verify behaviour.
4436 *) Add new PKCS#7 signing option PKCS7_NOSMIMECAP which
4437 excludes S/MIME capabilities.
4440 *) When a certificate request is read in keep a copy of the
4441 original encoding of the signed data and use it when outputing
4442 again. Signatures then use the original encoding rather than
4443 a decoded, encoded version which may cause problems if the
4444 request is improperly encoded.
4447 *) For consistency with other BIO_puts implementations, call
4448 buffer_write(b, ...) directly in buffer_puts instead of calling
4451 In BIO_puts, increment b->num_write as in BIO_write.
4452 [Peter.Sylvester@EdelWeb.fr]
4454 *) Fix BN_mul_word for the case where the word is 0. (We have to use
4455 BN_zero, we may not return a BIGNUM with an array consisting of
4459 *) Avoid calling abort() from within the library when problems are
4460 detected, except if preprocessor symbols have been defined
4461 (such as REF_CHECK, BN_DEBUG etc.).
4464 *) New openssl application 'rsautl'. This utility can be
4465 used for low level RSA operations. DER public key
4466 BIO/fp routines also added.
4469 *) New Configure entry and patches for compiling on QNX 4.
4470 [Andreas Schneider <andreas@ds3.etech.fh-hamburg.de>]
4472 *) A demo state-machine implementation was sponsored by
4473 Nuron (http://www.nuron.com/) and is now available in
4474 demos/state_machine.
4477 *) New options added to the 'dgst' utility for signature
4478 generation and verification.
4481 *) Unrecognized PKCS#7 content types are now handled via a
4482 catch all ASN1_TYPE structure. This allows unsupported
4483 types to be stored as a "blob" and an application can
4484 encode and decode it manually.
4487 *) Fix various signed/unsigned issues to make a_strex.c
4489 [Oscar Jacobsson <oscar.jacobsson@celocom.com>]
4491 *) ASN1 fixes. i2d_ASN1_OBJECT was not returning the correct
4492 length if passed a buffer. ASN1_INTEGER_to_BN failed
4493 if passed a NULL BN and its argument was negative.
4494 [Steve Henson, pointed out by Sven Heiberg <sven@tartu.cyber.ee>]
4496 *) Modification to PKCS#7 encoding routines to output definite
4497 length encoding. Since currently the whole structures are in
4498 memory there's not real point in using indefinite length
4499 constructed encoding. However if OpenSSL is compiled with
4500 the flag PKCS7_INDEFINITE_ENCODING the old form is used.
4503 *) Added BIO_vprintf() and BIO_vsnprintf().
4506 *) Added more prefixes to parse for in the the strings written
4507 through a logging bio, to cover all the levels that are available
4508 through syslog. The prefixes are now:
4510 PANIC, EMERG, EMR => LOG_EMERG
4511 ALERT, ALR => LOG_ALERT
4512 CRIT, CRI => LOG_CRIT
4513 ERROR, ERR => LOG_ERR
4514 WARNING, WARN, WAR => LOG_WARNING
4515 NOTICE, NOTE, NOT => LOG_NOTICE
4516 INFO, INF => LOG_INFO
4517 DEBUG, DBG => LOG_DEBUG
4519 and as before, if none of those prefixes are present at the
4520 beginning of the string, LOG_ERR is chosen.
4522 On Win32, the LOG_* levels are mapped according to this:
4524 LOG_EMERG, LOG_ALERT, LOG_CRIT, LOG_ERR => EVENTLOG_ERROR_TYPE
4525 LOG_WARNING => EVENTLOG_WARNING_TYPE
4526 LOG_NOTICE, LOG_INFO, LOG_DEBUG => EVENTLOG_INFORMATION_TYPE
4530 *) Made it possible to reconfigure with just the configuration
4531 argument "reconf" or "reconfigure". The command line arguments
4532 are stored in Makefile.ssl in the variable CONFIGURE_ARGS,
4533 and are retrieved from there when reconfiguring.
4537 [Assar Westerlund <assar@sics.se>, Richard Levitte]
4539 *) Add the arguments -CAfile and -CApath to the pkcs12 utility.
4542 *) The obj_dat.pl script was messing up the sorting of object
4543 names. The reason was that it compared the quoted version
4544 of strings as a result "OCSP" > "OCSP Signing" because
4545 " > SPACE. Changed script to store unquoted versions of
4546 names and add quotes on output. It was also omitting some
4547 names from the lookup table if they were given a default
4548 value (that is if SN is missing it is given the same
4549 value as LN and vice versa), these are now added on the
4550 grounds that if an object has a name we should be able to
4551 look it up. Finally added warning output when duplicate
4552 short or long names are found.
4555 *) Changes needed for Tandem NSK.
4556 [Scott Uroff <scott@xypro.com>]
4558 *) Fix SSL 2.0 rollback checking: Due to an off-by-one error in
4559 RSA_padding_check_SSLv23(), special padding was never detected
4560 and thus the SSL 3.0/TLS 1.0 countermeasure against protocol
4561 version rollback attacks was not effective.
4563 In s23_clnt.c, don't use special rollback-attack detection padding
4564 (RSA_SSLV23_PADDING) if SSL 2.0 is the only protocol enabled in the
4565 client; similarly, in s23_srvr.c, don't do the rollback check if
4566 SSL 2.0 is the only protocol enabled in the server.
4569 *) Make it possible to get hexdumps of unprintable data with 'openssl
4570 asn1parse'. By implication, the functions ASN1_parse_dump() and
4571 BIO_dump_indent() are added.
4574 *) New functions ASN1_STRING_print_ex() and X509_NAME_print_ex()
4575 these print out strings and name structures based on various
4576 flags including RFC2253 support and proper handling of
4577 multibyte characters. Added options to the 'x509' utility
4578 to allow the various flags to be set.
4581 *) Various fixes to use ASN1_TIME instead of ASN1_UTCTIME.
4582 Also change the functions X509_cmp_current_time() and
4583 X509_gmtime_adj() work with an ASN1_TIME structure,
4584 this will enable certificates using GeneralizedTime in validity
4585 dates to be checked.
4588 *) Make the NEG_PUBKEY_BUG code (which tolerates invalid
4589 negative public key encodings) on by default,
4590 NO_NEG_PUBKEY_BUG can be set to disable it.
4593 *) New function c2i_ASN1_OBJECT() which acts on ASN1_OBJECT
4594 content octets. An i2c_ASN1_OBJECT is unnecessary because
4595 the encoding can be trivially obtained from the structure.
4598 *) crypto/err.c locking bugfix: Use write locks (CRYPTO_w_[un]lock),
4599 not read locks (CRYPTO_r_[un]lock).
4602 *) A first attempt at creating official support for shared
4603 libraries through configuration. I've kept it so the
4604 default is static libraries only, and the OpenSSL programs
4605 are always statically linked for now, but there are
4606 preparations for dynamic linking in place.
4607 This has been tested on Linux and Tru64.
4610 *) Randomness polling function for Win9x, as described in:
4611 Peter Gutmann, Software Generation of Practically Strong
4615 *) Fix so PRNG is seeded in req if using an already existing
4619 *) New options to smime application. -inform and -outform
4620 allow alternative formats for the S/MIME message including
4621 PEM and DER. The -content option allows the content to be
4622 specified separately. This should allow things like Netscape
4623 form signing output easier to verify.
4626 *) Fix the ASN1 encoding of tags using the 'long form'.
4629 *) New ASN1 functions, i2c_* and c2i_* for INTEGER and BIT
4630 STRING types. These convert content octets to and from the
4631 underlying type. The actual tag and length octets are
4632 already assumed to have been read in and checked. These
4633 are needed because all other string types have virtually
4634 identical handling apart from the tag. By having versions
4635 of the ASN1 functions that just operate on content octets
4636 IMPLICIT tagging can be handled properly. It also allows
4637 the ASN1_ENUMERATED code to be cut down because ASN1_ENUMERATED
4638 and ASN1_INTEGER are identical apart from the tag.
4641 *) Change the handling of OID objects as follows:
4643 - New object identifiers are inserted in objects.txt, following
4644 the syntax given in objects.README.
4645 - objects.pl is used to process obj_mac.num and create a new
4647 - obj_dat.pl is used to create a new obj_dat.h, using the data in
4650 This is currently kind of a hack, and the perl code in objects.pl
4651 isn't very elegant, but it works as I intended. The simplest way
4652 to check that it worked correctly is to look in obj_dat.h and
4653 check the array nid_objs and make sure the objects haven't moved
4654 around (this is important!). Additions are OK, as well as
4655 consistent name changes.
4658 *) Add BSD-style MD5-based passwords to 'openssl passwd' (option '-1').
4661 *) Addition of the command line parameter '-rand file' to 'openssl req'.
4662 The given file adds to whatever has already been seeded into the
4663 random pool through the RANDFILE configuration file option or
4664 environment variable, or the default random state file.
4667 *) mkstack.pl now sorts each macro group into lexical order.
4668 Previously the output order depended on the order the files
4669 appeared in the directory, resulting in needless rewriting
4673 *) Patches to make OpenSSL compile under Win32 again. Mostly
4674 work arounds for the VC++ problem that it treats func() as
4675 func(void). Also stripped out the parts of mkdef.pl that
4676 added extra typesafe functions: these no longer exist.
4679 *) Reorganisation of the stack code. The macros are now all
4680 collected in safestack.h . Each macro is defined in terms of
4681 a "stack macro" of the form SKM_<name>(type, a, b). The
4682 DEBUG_SAFESTACK is now handled in terms of function casts,
4683 this has the advantage of retaining type safety without the
4684 use of additional functions. If DEBUG_SAFESTACK is not defined
4685 then the non typesafe macros are used instead. Also modified the
4686 mkstack.pl script to handle the new form. Needs testing to see
4687 if which (if any) compilers it chokes and maybe make DEBUG_SAFESTACK
4688 the default if no major problems. Similar behaviour for ASN1_SET_OF
4689 and PKCS12_STACK_OF.
4692 *) When some versions of IIS use the 'NET' form of private key the
4693 key derivation algorithm is different. Normally MD5(password) is
4694 used as a 128 bit RC4 key. In the modified case
4695 MD5(MD5(password) + "SGCKEYSALT") is used insted. Added some
4696 new functions i2d_RSA_NET(), d2i_RSA_NET() etc which are the same
4697 as the old Netscape_RSA functions except they have an additional
4698 'sgckey' parameter which uses the modified algorithm. Also added
4699 an -sgckey command line option to the rsa utility. Thanks to
4700 Adrian Peck <bertie@ncipher.com> for posting details of the modified
4701 algorithm to openssl-dev.
4704 *) The evp_local.h macros were using 'c.##kname' which resulted in
4705 invalid expansion on some systems (SCO 5.0.5 for example).
4706 Corrected to 'c.kname'.
4707 [Phillip Porch <root@theporch.com>]
4709 *) New X509_get1_email() and X509_REQ_get1_email() functions that return
4710 a STACK of email addresses from a certificate or request, these look
4711 in the subject name and the subject alternative name extensions and
4712 omit any duplicate addresses.
4715 *) Re-implement BN_mod_exp2_mont using independent (and larger) windows.
4716 This makes DSA verification about 2 % faster.
4719 *) Increase maximum window size in BN_mod_exp_... to 6 bits instead of 5
4720 (meaning that now 2^5 values will be precomputed, which is only 4 KB
4721 plus overhead for 1024 bit moduli).
4722 This makes exponentiations about 0.5 % faster for 1024 bit
4723 exponents (as measured by "openssl speed rsa2048").
4726 *) Rename memory handling macros to avoid conflicts with other
4728 Malloc => OPENSSL_malloc
4729 Malloc_locked => OPENSSL_malloc_locked
4730 Realloc => OPENSSL_realloc
4731 Free => OPENSSL_free
4734 *) New function BN_mod_exp_mont_word for small bases (roughly 15%
4735 faster than BN_mod_exp_mont, i.e. 7% for a full DH exchange).
4738 *) CygWin32 support.
4739 [John Jarvie <jjarvie@newsguy.com>]
4741 *) The type-safe stack code has been rejigged. It is now only compiled
4742 in when OpenSSL is configured with the DEBUG_SAFESTACK option and
4743 by default all type-specific stack functions are "#define"d back to
4744 standard stack functions. This results in more streamlined output
4745 but retains the type-safety checking possibilities of the original
4749 *) The STACK code has been cleaned up, and certain type declarations
4750 that didn't make a lot of sense have been brought in line. This has
4751 also involved a cleanup of sorts in safestack.h to more correctly
4752 map type-safe stack functions onto their plain stack counterparts.
4753 This work has also resulted in a variety of "const"ifications of
4754 lots of the code, especially "_cmp" operations which should normally
4755 be prototyped with "const" parameters anyway.
4758 *) When generating bytes for the first time in md_rand.c, 'stir the pool'
4759 by seeding with STATE_SIZE dummy bytes (with zero entropy count).
4760 (The PRNG state consists of two parts, the large pool 'state' and 'md',
4761 where all of 'md' is used each time the PRNG is used, but 'state'
4762 is used only indexed by a cyclic counter. As entropy may not be
4763 well distributed from the beginning, 'md' is important as a
4764 chaining variable. However, the output function chains only half
4765 of 'md', i.e. 80 bits. ssleay_rand_add, on the other hand, chains
4766 all of 'md', and seeding with STATE_SIZE dummy bytes will result
4767 in all of 'state' being rewritten, with the new values depending
4768 on virtually all of 'md'. This overcomes the 80 bit limitation.)
4771 *) In ssl/s2_clnt.c and ssl/s3_clnt.c, call ERR_clear_error() when
4772 the handshake is continued after ssl_verify_cert_chain();
4773 otherwise, if SSL_VERIFY_NONE is set, remaining error codes
4774 can lead to 'unexplainable' connection aborts later.
4775 [Bodo Moeller; problem tracked down by Lutz Jaenicke]
4777 *) Major EVP API cipher revision.
4778 Add hooks for extra EVP features. This allows various cipher
4779 parameters to be set in the EVP interface. Support added for variable
4780 key length ciphers via the EVP_CIPHER_CTX_set_key_length() function and
4781 setting of RC2 and RC5 parameters.
4783 Modify EVP_OpenInit() and EVP_SealInit() to cope with variable key length
4786 Remove lots of duplicated code from the EVP library. For example *every*
4787 cipher init() function handles the 'iv' in the same way according to the
4788 cipher mode. They also all do nothing if the 'key' parameter is NULL and
4789 for CFB and OFB modes they zero ctx->num.
4791 New functionality allows removal of S/MIME code RC2 hack.
4793 Most of the routines have the same form and so can be declared in terms
4796 By shifting this to the top level EVP_CipherInit() it can be removed from
4797 all individual ciphers. If the cipher wants to handle IVs or keys
4798 differently it can set the EVP_CIPH_CUSTOM_IV or EVP_CIPH_ALWAYS_CALL_INIT
4801 Change lots of functions like EVP_EncryptUpdate() to now return a
4802 value: although software versions of the algorithms cannot fail
4803 any installed hardware versions can.
4806 *) Implement SSL_OP_TLS_ROLLBACK_BUG: In ssl3_get_client_key_exchange, if
4807 this option is set, tolerate broken clients that send the negotiated
4808 protocol version number instead of the requested protocol version
4812 *) Call dh_tmp_cb (set by ..._TMP_DH_CB) with correct 'is_export' flag;
4813 i.e. non-zero for export ciphersuites, zero otherwise.
4814 Previous versions had this flag inverted, inconsistent with
4815 rsa_tmp_cb (..._TMP_RSA_CB).
4816 [Bodo Moeller; problem reported by Amit Chopra]
4818 *) Add missing DSA library text string. Work around for some IIS
4819 key files with invalid SEQUENCE encoding.
4822 *) Add a document (doc/standards.txt) that list all kinds of standards
4823 and so on that are implemented in OpenSSL.
4826 *) Enhance c_rehash script. Old version would mishandle certificates
4827 with the same subject name hash and wouldn't handle CRLs at all.
4828 Added -fingerprint option to crl utility, to support new c_rehash
4832 *) Eliminate non-ANSI declarations in crypto.h and stack.h.
4835 *) Fix for SSL server purpose checking. Server checking was
4836 rejecting certificates which had extended key usage present
4837 but no ssl client purpose.
4838 [Steve Henson, reported by Rene Grosser <grosser@hisolutions.com>]
4840 *) Make PKCS#12 code work with no password. The PKCS#12 spec
4841 is a little unclear about how a blank password is handled.
4842 Since the password in encoded as a BMPString with terminating
4843 double NULL a zero length password would end up as just the
4844 double NULL. However no password at all is different and is
4845 handled differently in the PKCS#12 key generation code. NS
4846 treats a blank password as zero length. MSIE treats it as no
4847 password on export: but it will try both on import. We now do
4848 the same: PKCS12_parse() tries zero length and no password if
4849 the password is set to "" or NULL (NULL is now a valid password:
4850 it wasn't before) as does the pkcs12 application.
4853 *) Bugfixes in apps/x509.c: Avoid a memory leak; and don't use
4854 perror when PEM_read_bio_X509_REQ fails, the error message must
4855 be obtained from the error queue.
4858 *) Avoid 'thread_hash' memory leak in crypto/err/err.c by freeing
4859 it in ERR_remove_state if appropriate, and change ERR_get_state
4860 accordingly to avoid race conditions (this is necessary because
4861 thread_hash is no longer constant once set).
4864 *) Bugfix for linux-elf makefile.one.
4867 *) RSA_get_default_method() will now cause a default
4868 RSA_METHOD to be chosen if one doesn't exist already.
4869 Previously this was only set during a call to RSA_new()
4870 or RSA_new_method(NULL) meaning it was possible for
4871 RSA_get_default_method() to return NULL.
4874 *) Added native name translation to the existing DSO code
4875 that will convert (if the flag to do so is set) filenames
4876 that are sufficiently small and have no path information
4877 into a canonical native form. Eg. "blah" converted to
4878 "libblah.so" or "blah.dll" etc.
4881 *) New function ERR_error_string_n(e, buf, len) which is like
4882 ERR_error_string(e, buf), but writes at most 'len' bytes
4883 including the 0 terminator. For ERR_error_string_n, 'buf'
4885 [Damien Miller <djm@mindrot.org>, Bodo Moeller]
4887 *) CONF library reworked to become more general. A new CONF
4888 configuration file reader "class" is implemented as well as a
4889 new functions (NCONF_*, for "New CONF") to handle it. The now
4890 old CONF_* functions are still there, but are reimplemented to
4891 work in terms of the new functions. Also, a set of functions
4892 to handle the internal storage of the configuration data is
4893 provided to make it easier to write new configuration file
4894 reader "classes" (I can definitely see something reading a
4895 configuration file in XML format, for example), called _CONF_*,
4896 or "the configuration storage API"...
4898 The new configuration file reading functions are:
4900 NCONF_new, NCONF_free, NCONF_load, NCONF_load_fp, NCONF_load_bio,
4901 NCONF_get_section, NCONF_get_string, NCONF_get_numbre
4903 NCONF_default, NCONF_WIN32
4905 NCONF_dump_fp, NCONF_dump_bio
4907 NCONF_default and NCONF_WIN32 are method (or "class") choosers,
4908 NCONF_new creates a new CONF object. This works in the same way
4909 as other interfaces in OpenSSL, like the BIO interface.
4910 NCONF_dump_* dump the internal storage of the configuration file,
4911 which is useful for debugging. All other functions take the same
4912 arguments as the old CONF_* functions wth the exception of the
4913 first that must be a `CONF *' instead of a `LHASH *'.
4915 To make it easer to use the new classes with the old CONF_* functions,
4916 the function CONF_set_default_method is provided.
4919 *) Add '-tls1' option to 'openssl ciphers', which was already
4920 mentioned in the documentation but had not been implemented.
4921 (This option is not yet really useful because even the additional
4922 experimental TLS 1.0 ciphers are currently treated as SSL 3.0 ciphers.)
4925 *) Initial DSO code added into libcrypto for letting OpenSSL (and
4926 OpenSSL-based applications) load shared libraries and bind to
4927 them in a portable way.
4928 [Geoff Thorpe, with contributions from Richard Levitte]
4930 Changes between 0.9.5 and 0.9.5a [1 Apr 2000]
4932 *) Make sure _lrotl and _lrotr are only used with MSVC.
4934 *) Use lock CRYPTO_LOCK_RAND correctly in ssleay_rand_status
4935 (the default implementation of RAND_status).
4937 *) Rename openssl x509 option '-crlext', which was added in 0.9.5,
4938 to '-clrext' (= clear extensions), as intended and documented.
4939 [Bodo Moeller; inconsistency pointed out by Michael Attili
4942 *) Fix for HMAC. It wasn't zeroing the rest of the block if the key length
4943 was larger than the MD block size.
4944 [Steve Henson, pointed out by Yost William <YostW@tce.com>]
4946 *) Modernise PKCS12_parse() so it uses STACK_OF(X509) for its ca argument
4947 fix a leak when the ca argument was passed as NULL. Stop X509_PUBKEY_set()
4948 using the passed key: if the passed key was a private key the result
4949 of X509_print(), for example, would be to print out all the private key
4953 *) des_quad_cksum() byte order bug fix.
4954 [Ulf Möller, using the problem description in krb4-0.9.7, where
4955 the solution is attributed to Derrick J Brashear <shadow@DEMENTIA.ORG>]
4957 *) Fix so V_ASN1_APP_CHOOSE works again: however its use is strongly
4959 [Steve Henson, pointed out by Brian Korver <briank@cs.stanford.edu>]
4961 *) For easily testing in shell scripts whether some command
4962 'openssl XXX' exists, the new pseudo-command 'openssl no-XXX'
4963 returns with exit code 0 iff no command of the given name is available.
4964 'no-XXX' is printed in this case, 'XXX' otherwise. In both cases,
4965 the output goes to stdout and nothing is printed to stderr.
4966 Additional arguments are always ignored.
4968 Since for each cipher there is a command of the same name,
4969 the 'no-cipher' compilation switches can be tested this way.
4971 ('openssl no-XXX' is not able to detect pseudo-commands such
4972 as 'quit', 'list-XXX-commands', or 'no-XXX' itself.)
4975 *) Update test suite so that 'make test' succeeds in 'no-rsa' configuration.
4978 *) For SSL_[CTX_]set_tmp_dh, don't create a DH key if SSL_OP_SINGLE_DH_USE
4979 is set; it will be thrown away anyway because each handshake creates
4981 ssl_cert_dup, which is used by SSL_new, now copies DH keys in addition
4982 to parameters -- in previous versions (since OpenSSL 0.9.3) the
4983 'default key' from SSL_CTX_set_tmp_dh would always be lost, meanining
4984 you effectivly got SSL_OP_SINGLE_DH_USE when using this macro.
4987 *) New s_client option -ign_eof: EOF at stdin is ignored, and
4988 'Q' and 'R' lose their special meanings (quit/renegotiate).
4989 This is part of what -quiet does; unlike -quiet, -ign_eof
4990 does not suppress any output.
4993 *) Add compatibility options to the purpose and trust code. The
4994 purpose X509_PURPOSE_ANY is "any purpose" which automatically
4995 accepts a certificate or CA, this was the previous behaviour,
4996 with all the associated security issues.
4998 X509_TRUST_COMPAT is the old trust behaviour: only and
4999 automatically trust self signed roots in certificate store. A
5000 new trust setting X509_TRUST_DEFAULT is used to specify that
5001 a purpose has no associated trust setting and it should instead
5002 use the value in the default purpose.
5005 *) Fix the PKCS#8 DSA private key code so it decodes keys again
5006 and fix a memory leak.
5009 *) In util/mkerr.pl (which implements 'make errors'), preserve
5010 reason strings from the previous version of the .c file, as
5011 the default to have only downcase letters (and digits) in
5012 automatically generated reasons codes is not always appropriate.
5015 *) In ERR_load_ERR_strings(), build an ERR_LIB_SYS error reason table
5016 using strerror. Previously, ERR_reason_error_string() returned
5017 library names as reason strings for SYSerr; but SYSerr is a special
5018 case where small numbers are errno values, not library numbers.
5021 *) Add '-dsaparam' option to 'openssl dhparam' application. This
5022 converts DSA parameters into DH parameters. (When creating parameters,
5023 DSA_generate_parameters is used.)
5026 *) Include 'length' (recommended exponent length) in C code generated
5027 by 'openssl dhparam -C'.
5030 *) The second argument to set_label in perlasm was already being used
5031 so couldn't be used as a "file scope" flag. Moved to third argument
5035 *) In PEM_ASN1_write_bio and some other functions, use RAND_pseudo_bytes
5036 instead of RAND_bytes for encryption IVs and salts.
5039 *) Include RAND_status() into RAND_METHOD instead of implementing
5040 it only for md_rand.c Otherwise replacing the PRNG by calling
5041 RAND_set_rand_method would be impossible.
5044 *) Don't let DSA_generate_key() enter an infinite loop if the random
5045 number generation fails.
5048 *) New 'rand' application for creating pseudo-random output.
5051 *) Added configuration support for Linux/IA64
5052 [Rolf Haberrecker <rolf@suse.de>]
5054 *) Assembler module support for Mingw32.
5057 *) Shared library support for HPUX (in shlib/).
5058 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE> and Anonymous]
5060 *) Shared library support for Solaris gcc.
5061 [Lutz Behnke <behnke@trustcenter.de>]
5063 Changes between 0.9.4 and 0.9.5 [28 Feb 2000]
5065 *) PKCS7_encrypt() was adding text MIME headers twice because they
5066 were added manually and by SMIME_crlf_copy().
5069 *) In bntest.c don't call BN_rand with zero bits argument.
5070 [Steve Henson, pointed out by Andrew W. Gray <agray@iconsinc.com>]
5072 *) BN_mul bugfix: In bn_mul_part_recursion() only the a>a[n] && b>b[n]
5073 case was implemented. This caused BN_div_recp() to fail occasionally.
5076 *) Add an optional second argument to the set_label() in the perl
5077 assembly language builder. If this argument exists and is set
5078 to 1 it signals that the assembler should use a symbol whose
5079 scope is the entire file, not just the current function. This
5080 is needed with MASM which uses the format label:: for this scope.
5081 [Steve Henson, pointed out by Peter Runestig <peter@runestig.com>]
5083 *) Change the ASN1 types so they are typedefs by default. Before
5084 almost all types were #define'd to ASN1_STRING which was causing
5085 STACK_OF() problems: you couldn't declare STACK_OF(ASN1_UTF8STRING)
5089 *) Change names of new functions to the new get1/get0 naming
5090 convention: After 'get1', the caller owns a reference count
5091 and has to call ..._free; 'get0' returns a pointer to some
5092 data structure without incrementing reference counters.
5093 (Some of the existing 'get' functions increment a reference
5094 counter, some don't.)
5095 Similarly, 'set1' and 'add1' functions increase reference
5096 counters or duplicate objects.
5099 *) Allow for the possibility of temp RSA key generation failure:
5100 the code used to assume it always worked and crashed on failure.
5103 *) Fix potential buffer overrun problem in BIO_printf().
5104 [Ulf Möller, using public domain code by Patrick Powell; problem
5105 pointed out by David Sacerdote <das33@cornell.edu>]
5107 *) Support EGD <http://www.lothar.com/tech/crypto/>. New functions
5108 RAND_egd() and RAND_status(). In the command line application,
5109 the EGD socket can be specified like a seed file using RANDFILE
5113 *) Allow the string CERTIFICATE to be tolerated in PKCS#7 structures.
5114 Some CAs (e.g. Verisign) distribute certificates in this form.
5117 *) Remove the SSL_ALLOW_ADH compile option and set the default cipher
5118 list to exclude them. This means that no special compilation option
5119 is needed to use anonymous DH: it just needs to be included in the
5123 *) Change the EVP_MD_CTX_type macro so its meaning consistent with
5124 EVP_MD_type. The old functionality is available in a new macro called
5125 EVP_MD_md(). Change code that uses it and update docs.
5128 *) ..._ctrl functions now have corresponding ..._callback_ctrl functions
5129 where the 'void *' argument is replaced by a function pointer argument.
5130 Previously 'void *' was abused to point to functions, which works on
5131 many platforms, but is not correct. As these functions are usually
5132 called by macros defined in OpenSSL header files, most source code
5133 should work without changes.
5136 *) <openssl/opensslconf.h> (which is created by Configure) now contains
5137 sections with information on -D... compiler switches used for
5138 compiling the library so that applications can see them. To enable
5139 one of these sections, a pre-processor symbol OPENSSL_..._DEFINES
5140 must be defined. E.g.,
5141 #define OPENSSL_ALGORITHM_DEFINES
5142 #include <openssl/opensslconf.h>
5143 defines all pertinent NO_<algo> symbols, such as NO_IDEA, NO_RSA, etc.
5144 [Richard Levitte, Ulf and Bodo Möller]
5146 *) Bugfix: Tolerate fragmentation and interleaving in the SSL 3/TLS
5150 *) Change the 'other' type in certificate aux info to a STACK_OF
5151 X509_ALGOR. Although not an AlgorithmIdentifier as such it has
5152 the required ASN1 format: arbitrary types determined by an OID.
5155 *) Add some PEM_write_X509_REQ_NEW() functions and a command line
5156 argument to 'req'. This is not because the function is newer or
5157 better than others it just uses the work 'NEW' in the certificate
5158 request header lines. Some software needs this.
5161 *) Reorganise password command line arguments: now passwords can be
5162 obtained from various sources. Delete the PEM_cb function and make
5163 it the default behaviour: i.e. if the callback is NULL and the
5164 usrdata argument is not NULL interpret it as a null terminated pass
5165 phrase. If usrdata and the callback are NULL then the pass phrase
5166 is prompted for as usual.
5169 *) Add support for the Compaq Atalla crypto accelerator. If it is installed,
5170 the support is automatically enabled. The resulting binaries will
5171 autodetect the card and use it if present.
5172 [Ben Laurie and Compaq Inc.]
5174 *) Work around for Netscape hang bug. This sends certificate request
5175 and server done in one record. Since this is perfectly legal in the
5176 SSL/TLS protocol it isn't a "bug" option and is on by default. See
5177 the bugs/SSLv3 entry for more info.
5180 *) HP-UX tune-up: new unified configs, HP C compiler bug workaround.
5183 *) Add -rand argument to smime and pkcs12 applications and read/write
5187 *) New 'passwd' tool for crypt(3) and apr1 password hashes.
5190 *) Add command line password options to the remaining applications.
5193 *) Bug fix for BN_div_recp() for numerators with an even number of
5197 *) More tests in bntest.c, and changed test_bn output.
5200 *) ./config recognizes MacOS X now.
5203 *) Bug fix for BN_div() when the first words of num and divsor are
5204 equal (it gave wrong results if (rem=(n1-q*d0)&BN_MASK2) < d0).
5207 *) Add support for various broken PKCS#8 formats, and command line
5208 options to produce them.
5211 *) New functions BN_CTX_start(), BN_CTX_get() and BT_CTX_end() to
5212 get temporary BIGNUMs from a BN_CTX.
5215 *) Correct return values in BN_mod_exp_mont() and BN_mod_exp2_mont()
5219 *) Change the SSLeay_add_all_*() functions to OpenSSL_add_all_*() and
5220 include a #define from the old name to the new. The original intent
5221 was that statically linked binaries could for example just call
5222 SSLeay_add_all_ciphers() to just add ciphers to the table and not
5223 link with digests. This never worked becayse SSLeay_add_all_digests()
5224 and SSLeay_add_all_ciphers() were in the same source file so calling
5225 one would link with the other. They are now in separate source files.
5228 *) Add a new -notext option to 'ca' and a -pubkey option to 'spkac'.
5231 *) Use a less unusual form of the Miller-Rabin primality test (it used
5232 a binary algorithm for exponentiation integrated into the Miller-Rabin
5233 loop, our standard modexp algorithms are faster).
5236 *) Support for the EBCDIC character set completed.
5237 [Martin Kraemer <Martin.Kraemer@Mch.SNI.De>]
5239 *) Source code cleanups: use const where appropriate, eliminate casts,
5240 use void * instead of char * in lhash.
5243 *) Bugfix: ssl3_send_server_key_exchange was not restartable
5244 (the state was not changed to SSL3_ST_SW_KEY_EXCH_B, and because of
5245 this the server could overwrite ephemeral keys that the client
5249 *) Turn DSA_is_prime into a macro that calls BN_is_prime,
5250 using 50 iterations of the Rabin-Miller test.
5252 DSA_generate_parameters now uses BN_is_prime_fasttest (with 50
5253 iterations of the Rabin-Miller test as required by the appendix
5254 to FIPS PUB 186[-1]) instead of DSA_is_prime.
5255 As BN_is_prime_fasttest includes trial division, DSA parameter
5256 generation becomes much faster.
5258 This implies a change for the callback functions in DSA_is_prime
5259 and DSA_generate_parameters: The callback function is called once
5260 for each positive witness in the Rabin-Miller test, not just
5261 occasionally in the inner loop; and the parameters to the
5262 callback function now provide an iteration count for the outer
5263 loop rather than for the current invocation of the inner loop.
5264 DSA_generate_parameters additionally can call the callback
5265 function with an 'iteration count' of -1, meaning that a
5266 candidate has passed the trial division test (when q is generated
5267 from an application-provided seed, trial division is skipped).
5270 *) New function BN_is_prime_fasttest that optionally does trial
5271 division before starting the Rabin-Miller test and has
5272 an additional BN_CTX * argument (whereas BN_is_prime always
5273 has to allocate at least one BN_CTX).
5274 'callback(1, -1, cb_arg)' is called when a number has passed the
5275 trial division stage.
5278 *) Fix for bug in CRL encoding. The validity dates weren't being handled
5282 *) New -pkcs12 option to CA.pl script to write out a PKCS#12 file.
5285 *) New function BN_pseudo_rand().
5288 *) Clean up BN_mod_mul_montgomery(): replace the broken (and unreadable)
5289 bignum version of BN_from_montgomery() with the working code from
5290 SSLeay 0.9.0 (the word based version is faster anyway), and clean up
5294 *) Avoid a race condition in s2_clnt.c (function get_server_hello) that
5295 made it impossible to use the same SSL_SESSION data structure in
5296 SSL2 clients in multiple threads.
5299 *) The return value of RAND_load_file() no longer counts bytes obtained
5300 by stat(). RAND_load_file(..., -1) is new and uses the complete file
5301 to seed the PRNG (previously an explicit byte count was required).
5302 [Ulf Möller, Bodo Möller]
5304 *) Clean up CRYPTO_EX_DATA functions, some of these didn't have prototypes
5305 used (char *) instead of (void *) and had casts all over the place.
5308 *) Make BN_generate_prime() return NULL on error if ret!=NULL.
5311 *) Retain source code compatibility for BN_prime_checks macro:
5312 BN_is_prime(..., BN_prime_checks, ...) now uses
5313 BN_prime_checks_for_size to determine the appropriate number of
5314 Rabin-Miller iterations.
5317 *) Diffie-Hellman uses "safe" primes: DH_check() return code renamed to
5318 DH_CHECK_P_NOT_SAFE_PRIME.
5319 (Check if this is true? OpenPGP calls them "strong".)
5322 *) Merge the functionality of "dh" and "gendh" programs into a new program
5323 "dhparam". The old programs are retained for now but will handle DH keys
5324 (instead of parameters) in future.
5327 *) Make the ciphers, s_server and s_client programs check the return values
5328 when a new cipher list is set.
5331 *) Enhance the SSL/TLS cipher mechanism to correctly handle the TLS 56bit
5332 ciphers. Before when the 56bit ciphers were enabled the sorting was
5335 The syntax for the cipher sorting has been extended to support sorting by
5336 cipher-strength (using the strength_bits hard coded in the tables).
5337 The new command is "@STRENGTH" (see also doc/apps/ciphers.pod).
5339 Fix a bug in the cipher-command parser: when supplying a cipher command
5340 string with an "undefined" symbol (neither command nor alphanumeric
5341 [A-Za-z0-9], ssl_set_cipher_list used to hang in an endless loop. Now
5342 an error is flagged.
5344 Due to the strength-sorting extension, the code of the
5345 ssl_create_cipher_list() function was completely rearranged. I hope that
5346 the readability was also increased :-)
5347 [Lutz Jaenicke <Lutz.Jaenicke@aet.TU-Cottbus.DE>]
5349 *) Minor change to 'x509' utility. The -CAcreateserial option now uses 1
5350 for the first serial number and places 2 in the serial number file. This
5351 avoids problems when the root CA is created with serial number zero and
5352 the first user certificate has the same issuer name and serial number
5356 *) Fixes to X509_ATTRIBUTE utilities, change the 'req' program so it uses
5357 the new code. Add documentation for this stuff.
5360 *) Changes to X509_ATTRIBUTE utilities. These have been renamed from
5361 X509_*() to X509at_*() on the grounds that they don't handle X509
5362 structures and behave in an analagous way to the X509v3 functions:
5363 they shouldn't be called directly but wrapper functions should be used
5366 So we also now have some wrapper functions that call the X509at functions
5367 when passed certificate requests. (TO DO: similar things can be done with
5368 PKCS#7 signed and unsigned attributes, PKCS#12 attributes and a few other
5369 things. Some of these need some d2i or i2d and print functionality
5370 because they handle more complex structures.)
5373 *) Add missing #ifndefs that caused missing symbols when building libssl
5374 as a shared library without RSA. Use #ifndef NO_SSL2 instead of
5375 NO_RSA in ssl/s2*.c.
5376 [Kris Kennaway <kris@hub.freebsd.org>, modified by Ulf Möller]
5378 *) Precautions against using the PRNG uninitialized: RAND_bytes() now
5379 has a return value which indicates the quality of the random data
5380 (1 = ok, 0 = not seeded). Also an error is recorded on the thread's
5381 error queue. New function RAND_pseudo_bytes() generates output that is
5382 guaranteed to be unique but not unpredictable. RAND_add is like
5383 RAND_seed, but takes an extra argument for an entropy estimate
5384 (RAND_seed always assumes full entropy).
5387 *) Do more iterations of Rabin-Miller probable prime test (specifically,
5388 3 for 1024-bit primes, 6 for 512-bit primes, 12 for 256-bit primes
5389 instead of only 2 for all lengths; see BN_prime_checks_for_size definition
5390 in crypto/bn/bn_prime.c for the complete table). This guarantees a
5391 false-positive rate of at most 2^-80 for random input.
5394 *) Rewrite ssl3_read_n (ssl/s3_pkt.c) avoiding a couple of bugs.
5397 *) New function X509_CTX_rget_chain() (renamed to X509_CTX_get1_chain
5398 in the 0.9.5 release), this returns the chain
5399 from an X509_CTX structure with a dup of the stack and all
5400 the X509 reference counts upped: so the stack will exist
5401 after X509_CTX_cleanup() has been called. Modify pkcs12.c
5404 Also make SSL_SESSION_print() print out the verify return
5408 *) Add manpage for the pkcs12 command. Also change the default
5409 behaviour so MAC iteration counts are used unless the new
5410 -nomaciter option is used. This improves file security and
5411 only older versions of MSIE (4.0 for example) need it.
5414 *) Honor the no-xxx Configure options when creating .DEF files.
5417 *) Add PKCS#10 attributes to field table: challengePassword,
5418 unstructuredName and unstructuredAddress. These are taken from
5419 draft PKCS#9 v2.0 but are compatible with v1.2 provided no
5420 international characters are used.
5422 More changes to X509_ATTRIBUTE code: allow the setting of types
5423 based on strings. Remove the 'loc' parameter when adding
5424 attributes because these will be a SET OF encoding which is sorted
5428 *) Initial changes to the 'req' utility to allow request generation
5429 automation. This will allow an application to just generate a template
5430 file containing all the field values and have req construct the
5433 Initial support for X509_ATTRIBUTE handling. Stacks of these are
5434 used all over the place including certificate requests and PKCS#7
5435 structures. They are currently handled manually where necessary with
5436 some primitive wrappers for PKCS#7. The new functions behave in a
5437 manner analogous to the X509 extension functions: they allow
5438 attributes to be looked up by NID and added.
5440 Later something similar to the X509V3 code would be desirable to
5441 automatically handle the encoding, decoding and printing of the
5442 more complex types. The string types like challengePassword can
5443 be handled by the string table functions.
5445 Also modified the multi byte string table handling. Now there is
5446 a 'global mask' which masks out certain types. The table itself
5447 can use the flag STABLE_NO_MASK to ignore the mask setting: this
5448 is useful when for example there is only one permissible type
5449 (as in countryName) and using the mask might result in no valid
5453 *) Clean up 'Finished' handling, and add functions SSL_get_finished and
5454 SSL_get_peer_finished to allow applications to obtain the latest
5455 Finished messages sent to the peer or expected from the peer,
5456 respectively. (SSL_get_peer_finished is usually the Finished message
5457 actually received from the peer, otherwise the protocol will be aborted.)
5459 As the Finished message are message digests of the complete handshake
5460 (with a total of 192 bits for TLS 1.0 and more for SSL 3.0), they can
5461 be used for external authentication procedures when the authentication
5462 provided by SSL/TLS is not desired or is not enough.
5465 *) Enhanced support for Alpha Linux is added. Now ./config checks if
5466 the host supports BWX extension and if Compaq C is present on the
5467 $PATH. Just exploiting of the BWX extension results in 20-30%
5468 performance kick for some algorithms, e.g. DES and RC4 to mention
5469 a couple. Compaq C in turn generates ~20% faster code for MD5 and
5473 *) Add support for MS "fast SGC". This is arguably a violation of the
5474 SSL3/TLS protocol. Netscape SGC does two handshakes: the first with
5475 weak crypto and after checking the certificate is SGC a second one
5476 with strong crypto. MS SGC stops the first handshake after receiving
5477 the server certificate message and sends a second client hello. Since
5478 a server will typically do all the time consuming operations before
5479 expecting any further messages from the client (server key exchange
5480 is the most expensive) there is little difference between the two.
5482 To get OpenSSL to support MS SGC we have to permit a second client
5483 hello message after we have sent server done. In addition we have to
5484 reset the MAC if we do get this second client hello.
5487 *) Add a function 'd2i_AutoPrivateKey()' this will automatically decide
5488 if a DER encoded private key is RSA or DSA traditional format. Changed
5489 d2i_PrivateKey_bio() to use it. This is only needed for the "traditional"
5490 format DER encoded private key. Newer code should use PKCS#8 format which
5491 has the key type encoded in the ASN1 structure. Added DER private key
5492 support to pkcs8 application.
5495 *) SSL 3/TLS 1 servers now don't request certificates when an anonymous
5496 ciphersuites has been selected (as required by the SSL 3/TLS 1
5497 specifications). Exception: When SSL_VERIFY_FAIL_IF_NO_PEER_CERT
5498 is set, we interpret this as a request to violate the specification
5499 (the worst that can happen is a handshake failure, and 'correct'
5500 behaviour would result in a handshake failure anyway).
5503 *) In SSL_CTX_add_session, take into account that there might be multiple
5504 SSL_SESSION structures with the same session ID (e.g. when two threads
5505 concurrently obtain them from an external cache).
5506 The internal cache can handle only one SSL_SESSION with a given ID,
5507 so if there's a conflict, we now throw out the old one to achieve
5511 *) Add OIDs for idea and blowfish in CBC mode. This will allow both
5512 to be used in PKCS#5 v2.0 and S/MIME. Also add checking to
5513 some routines that use cipher OIDs: some ciphers do not have OIDs
5514 defined and so they cannot be used for S/MIME and PKCS#5 v2.0 for
5518 *) Simplify the trust setting structure and code. Now we just have
5519 two sequences of OIDs for trusted and rejected settings. These will
5520 typically have values the same as the extended key usage extension
5521 and any application specific purposes.
5523 The trust checking code now has a default behaviour: it will just
5524 check for an object with the same NID as the passed id. Functions can
5525 be provided to override either the default behaviour or the behaviour
5526 for a given id. SSL client, server and email already have functions
5527 in place for compatibility: they check the NID and also return "trusted"
5528 if the certificate is self signed.
5531 *) Add d2i,i2d bio/fp functions for PrivateKey: these convert the
5532 traditional format into an EVP_PKEY structure.
5535 *) Add a password callback function PEM_cb() which either prompts for
5536 a password if usr_data is NULL or otherwise assumes it is a null
5537 terminated password. Allow passwords to be passed on command line
5538 environment or config files in a few more utilities.
5541 *) Add a bunch of DER and PEM functions to handle PKCS#8 format private
5542 keys. Add some short names for PKCS#8 PBE algorithms and allow them
5543 to be specified on the command line for the pkcs8 and pkcs12 utilities.
5544 Update documentation.
5547 *) Support for ASN1 "NULL" type. This could be handled before by using
5548 ASN1_TYPE but there wasn't any function that would try to read a NULL
5549 and produce an error if it couldn't. For compatibility we also have
5550 ASN1_NULL_new() and ASN1_NULL_free() functions but these are faked and
5551 don't allocate anything because they don't need to.
5554 *) Initial support for MacOS is now provided. Examine INSTALL.MacOS
5556 [Andy Polyakov, Roy Woods <roy@centicsystems.ca>]
5558 *) Rebuild of the memory allocation routines used by OpenSSL code and
5559 possibly others as well. The purpose is to make an interface that
5560 provide hooks so anyone can build a separate set of allocation and
5561 deallocation routines to be used by OpenSSL, for example memory
5562 pool implementations, or something else, which was previously hard
5563 since Malloc(), Realloc() and Free() were defined as macros having
5564 the values malloc, realloc and free, respectively (except for Win32
5565 compilations). The same is provided for memory debugging code.
5566 OpenSSL already comes with functionality to find memory leaks, but
5567 this gives people a chance to debug other memory problems.
5569 With these changes, a new set of functions and macros have appeared:
5571 CRYPTO_set_mem_debug_functions() [F]
5572 CRYPTO_get_mem_debug_functions() [F]
5573 CRYPTO_dbg_set_options() [F]
5574 CRYPTO_dbg_get_options() [F]
5575 CRYPTO_malloc_debug_init() [M]
5577 The memory debug functions are NULL by default, unless the library
5578 is compiled with CRYPTO_MDEBUG or friends is defined. If someone
5579 wants to debug memory anyway, CRYPTO_malloc_debug_init() (which
5580 gives the standard debugging functions that come with OpenSSL) or
5581 CRYPTO_set_mem_debug_functions() (tells OpenSSL to use functions
5582 provided by the library user) must be used. When the standard
5583 debugging functions are used, CRYPTO_dbg_set_options can be used to
5584 request additional information:
5585 CRYPTO_dbg_set_options(V_CYRPTO_MDEBUG_xxx) corresponds to setting
5586 the CRYPTO_MDEBUG_xxx macro when compiling the library.
5588 Also, things like CRYPTO_set_mem_functions will always give the
5589 expected result (the new set of functions is used for allocation
5590 and deallocation) at all times, regardless of platform and compiler
5593 To finish it up, some functions that were never use in any other
5594 way than through macros have a new API and new semantic:
5597 CRYPTO_dbg_realloc()
5600 All macros of value have retained their old syntax.
5601 [Richard Levitte and Bodo Moeller]
5603 *) Some S/MIME fixes. The OID for SMIMECapabilities was wrong, the
5604 ordering of SMIMECapabilities wasn't in "strength order" and there
5605 was a missing NULL in the AlgorithmIdentifier for the SHA1 signature
5609 *) Some ASN1 types with illegal zero length encoding (INTEGER,
5610 ENUMERATED and OBJECT IDENTIFIER) choked the ASN1 routines.
5611 [Frans Heymans <fheymans@isaserver.be>, modified by Steve Henson]
5613 *) Merge in my S/MIME library for OpenSSL. This provides a simple
5614 S/MIME API on top of the PKCS#7 code, a MIME parser (with enough
5615 functionality to handle multipart/signed properly) and a utility
5616 called 'smime' to call all this stuff. This is based on code I
5617 originally wrote for Celo who have kindly allowed it to be
5618 included in OpenSSL.
5621 *) Add variants des_set_key_checked and des_set_key_unchecked of
5622 des_set_key (aka des_key_sched). Global variable des_check_key
5623 decides which of these is called by des_set_key; this way
5624 des_check_key behaves as it always did, but applications and
5625 the library itself, which was buggy for des_check_key == 1,
5626 have a cleaner way to pick the version they need.
5629 *) New function PKCS12_newpass() which changes the password of a
5633 *) Modify X509_TRUST and X509_PURPOSE so it also uses a static and
5634 dynamic mix. In both cases the ids can be used as an index into the
5635 table. Also modified the X509_TRUST_add() and X509_PURPOSE_add()
5636 functions so they accept a list of the field values and the
5637 application doesn't need to directly manipulate the X509_TRUST
5641 *) Modify the ASN1_STRING_TABLE stuff so it also uses bsearch and doesn't
5645 *) Modify the way the V3 extension code looks up extensions. This now
5646 works in a similar way to the object code: we have some "standard"
5647 extensions in a static table which is searched with OBJ_bsearch()
5648 and the application can add dynamic ones if needed. The file
5649 crypto/x509v3/ext_dat.h now has the info: this file needs to be
5650 updated whenever a new extension is added to the core code and kept
5651 in ext_nid order. There is a simple program 'tabtest.c' which checks
5652 this. New extensions are not added too often so this file can readily
5653 be maintained manually.
5655 There are two big advantages in doing things this way. The extensions
5656 can be looked up immediately and no longer need to be "added" using
5657 X509V3_add_standard_extensions(): this function now does nothing.
5658 [Side note: I get *lots* of email saying the extension code doesn't
5659 work because people forget to call this function]
5660 Also no dynamic allocation is done unless new extensions are added:
5661 so if we don't add custom extensions there is no need to call
5662 X509V3_EXT_cleanup().
5665 *) Modify enc utility's salting as follows: make salting the default. Add a
5666 magic header, so unsalted files fail gracefully instead of just decrypting
5667 to garbage. This is because not salting is a big security hole, so people
5668 should be discouraged from doing it.
5671 *) Fixes and enhancements to the 'x509' utility. It allowed a message
5672 digest to be passed on the command line but it only used this
5673 parameter when signing a certificate. Modified so all relevant
5674 operations are affected by the digest parameter including the
5675 -fingerprint and -x509toreq options. Also -x509toreq choked if a
5676 DSA key was used because it didn't fix the digest.
5679 *) Initial certificate chain verify code. Currently tests the untrusted
5680 certificates for consistency with the verify purpose (which is set
5681 when the X509_STORE_CTX structure is set up) and checks the pathlength.
5683 There is a NO_CHAIN_VERIFY compilation option to keep the old behaviour:
5684 this is because it will reject chains with invalid extensions whereas
5685 every previous version of OpenSSL and SSLeay made no checks at all.
5687 Trust code: checks the root CA for the relevant trust settings. Trust
5688 settings have an initial value consistent with the verify purpose: e.g.
5689 if the verify purpose is for SSL client use it expects the CA to be
5690 trusted for SSL client use. However the default value can be changed to
5691 permit custom trust settings: one example of this would be to only trust
5692 certificates from a specific "secure" set of CAs.
5694 Also added X509_STORE_CTX_new() and X509_STORE_CTX_free() functions
5695 which should be used for version portability: especially since the
5696 verify structure is likely to change more often now.
5698 SSL integration. Add purpose and trust to SSL_CTX and SSL and functions
5699 to set them. If not set then assume SSL clients will verify SSL servers
5702 Two new options to the verify program: -untrusted allows a set of
5703 untrusted certificates to be passed in and -purpose which sets the
5704 intended purpose of the certificate. If a purpose is set then the
5705 new chain verify code is used to check extension consistency.
5708 *) Support for the authority information access extension.
5711 *) Modify RSA and DSA PEM read routines to transparently handle
5712 PKCS#8 format private keys. New *_PUBKEY_* functions that handle
5713 public keys in a format compatible with certificate
5714 SubjectPublicKeyInfo structures. Unfortunately there were already
5715 functions called *_PublicKey_* which used various odd formats so
5716 these are retained for compatibility: however the DSA variants were
5717 never in a public release so they have been deleted. Changed dsa/rsa
5718 utilities to handle the new format: note no releases ever handled public
5719 keys so we should be OK.
5721 The primary motivation for this change is to avoid the same fiasco
5722 that dogs private keys: there are several incompatible private key
5723 formats some of which are standard and some OpenSSL specific and
5724 require various evil hacks to allow partial transparent handling and
5725 even then it doesn't work with DER formats. Given the option anything
5726 other than PKCS#8 should be dumped: but the other formats have to
5727 stay in the name of compatibility.
5729 With public keys and the benefit of hindsight one standard format
5730 is used which works with EVP_PKEY, RSA or DSA structures: though
5731 it clearly returns an error if you try to read the wrong kind of key.
5733 Added a -pubkey option to the 'x509' utility to output the public key.
5734 Also rename the EVP_PKEY_get_*() to EVP_PKEY_rget_*()
5735 (renamed to EVP_PKEY_get1_*() in the OpenSSL 0.9.5 release) and add
5736 EVP_PKEY_rset_*() functions (renamed to EVP_PKEY_set1_*())
5737 that do the same as the EVP_PKEY_assign_*() except they up the
5738 reference count of the added key (they don't "swallow" the
5742 *) Fixes to crypto/x509/by_file.c the code to read in certificates and
5743 CRLs would fail if the file contained no certificates or no CRLs:
5744 added a new function to read in both types and return the number
5745 read: this means that if none are read it will be an error. The
5746 DER versions of the certificate and CRL reader would always fail
5747 because it isn't possible to mix certificates and CRLs in DER format
5748 without choking one or the other routine. Changed this to just read
5749 a certificate: this is the best we can do. Also modified the code
5750 in apps/verify.c to take notice of return codes: it was previously
5751 attempting to read in certificates from NULL pointers and ignoring
5752 any errors: this is one reason why the cert and CRL reader seemed
5753 to work. It doesn't check return codes from the default certificate
5754 routines: these may well fail if the certificates aren't installed.
5757 *) Code to support otherName option in GeneralName.
5760 *) First update to verify code. Change the verify utility
5761 so it warns if it is passed a self signed certificate:
5762 for consistency with the normal behaviour. X509_verify
5763 has been modified to it will now verify a self signed
5764 certificate if *exactly* the same certificate appears
5765 in the store: it was previously impossible to trust a
5766 single self signed certificate. This means that:
5767 openssl verify ss.pem
5768 now gives a warning about a self signed certificate but
5769 openssl verify -CAfile ss.pem ss.pem
5773 *) For servers, store verify_result in SSL_SESSION data structure
5774 (and add it to external session representation).
5775 This is needed when client certificate verifications fails,
5776 but an application-provided verification callback (set by
5777 SSL_CTX_set_cert_verify_callback) allows accepting the session
5778 anyway (i.e. leaves x509_store_ctx->error != X509_V_OK
5779 but returns 1): When the session is reused, we have to set
5780 ssl->verify_result to the appropriate error code to avoid
5782 [Bodo Moeller, problem pointed out by Lutz Jaenicke]
5784 *) Fix a bug in the new PKCS#7 code: it didn't consider the
5785 case in PKCS7_dataInit() where the signed PKCS7 structure
5786 didn't contain any existing data because it was being created.
5787 [Po-Cheng Chen <pocheng@nst.com.tw>, slightly modified by Steve Henson]
5789 *) Add a salt to the key derivation routines in enc.c. This
5790 forms the first 8 bytes of the encrypted file. Also add a
5791 -S option to allow a salt to be input on the command line.
5794 *) New function X509_cmp(). Oddly enough there wasn't a function
5795 to compare two certificates. We do this by working out the SHA1
5796 hash and comparing that. X509_cmp() will be needed by the trust
5800 *) SSL_get1_session() is like SSL_get_session(), but increments
5801 the reference count in the SSL_SESSION returned.
5802 [Geoff Thorpe <geoff@eu.c2.net>]
5804 *) Fix for 'req': it was adding a null to request attributes.
5805 Also change the X509_LOOKUP and X509_INFO code to handle
5806 certificate auxiliary information.
5809 *) Add support for 40 and 64 bit RC2 and RC4 algorithms: document
5813 *) Add the possibility to add extra information to the memory leak
5814 detecting output, to form tracebacks, showing from where each
5815 allocation was originated: CRYPTO_push_info("constant string") adds
5816 the string plus current file name and line number to a per-thread
5817 stack, CRYPTO_pop_info() does the obvious, CRYPTO_remove_all_info()
5818 is like calling CYRPTO_pop_info() until the stack is empty.
5819 Also updated memory leak detection code to be multi-thread-safe.
5822 *) Add options -text and -noout to pkcs7 utility and delete the
5823 encryption options which never did anything. Update docs.
5826 *) Add options to some of the utilities to allow the pass phrase
5827 to be included on either the command line (not recommended on
5828 OSes like Unix) or read from the environment. Update the
5829 manpages and fix a few bugs.
5832 *) Add a few manpages for some of the openssl commands.
5835 *) Fix the -revoke option in ca. It was freeing up memory twice,
5836 leaking and not finding already revoked certificates.
5839 *) Extensive changes to support certificate auxiliary information.
5840 This involves the use of X509_CERT_AUX structure and X509_AUX
5841 functions. An X509_AUX function such as PEM_read_X509_AUX()
5842 can still read in a certificate file in the usual way but it
5843 will also read in any additional "auxiliary information". By
5844 doing things this way a fair degree of compatibility can be
5845 retained: existing certificates can have this information added
5846 using the new 'x509' options.
5848 Current auxiliary information includes an "alias" and some trust
5849 settings. The trust settings will ultimately be used in enhanced
5850 certificate chain verification routines: currently a certificate
5851 can only be trusted if it is self signed and then it is trusted
5855 *) Fix assembler for Alpha (tested only on DEC OSF not Linux or *BSD).
5856 The problem was that one of the replacement routines had not been working
5857 since SSLeay releases. For now the offending routine has been replaced
5858 with non-optimised assembler. Even so, this now gives around 95%
5859 performance improvement for 1024 bit RSA signs.
5862 *) Hack to fix PKCS#7 decryption when used with some unorthodox RC2
5863 handling. Most clients have the effective key size in bits equal to
5864 the key length in bits: so a 40 bit RC2 key uses a 40 bit (5 byte) key.
5865 A few however don't do this and instead use the size of the decrypted key
5866 to determine the RC2 key length and the AlgorithmIdentifier to determine
5867 the effective key length. In this case the effective key length can still
5868 be 40 bits but the key length can be 168 bits for example. This is fixed
5869 by manually forcing an RC2 key into the EVP_PKEY structure because the
5870 EVP code can't currently handle unusual RC2 key sizes: it always assumes
5871 the key length and effective key length are equal.
5874 *) Add a bunch of functions that should simplify the creation of
5875 X509_NAME structures. Now you should be able to do:
5876 X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, "Steve", -1, -1, 0);
5877 and have it automatically work out the correct field type and fill in
5878 the structures. The more adventurous can try:
5879 X509_NAME_add_entry_by_txt(nm, field, MBSTRING_UTF8, str, -1, -1, 0);
5880 and it will (hopefully) work out the correct multibyte encoding.
5883 *) Change the 'req' utility to use the new field handling and multibyte
5884 copy routines. Before the DN field creation was handled in an ad hoc
5885 way in req, ca, and x509 which was rather broken and didn't support
5886 BMPStrings or UTF8Strings. Since some software doesn't implement
5887 BMPStrings or UTF8Strings yet, they can be enabled using the config file
5888 using the dirstring_type option. See the new comment in the default
5889 openssl.cnf for more info.
5892 *) Make crypto/rand/md_rand.c more robust:
5893 - Assure unique random numbers after fork().
5894 - Make sure that concurrent threads access the global counter and
5895 md serializably so that we never lose entropy in them
5896 or use exactly the same state in multiple threads.
5897 Access to the large state is not always serializable because
5898 the additional locking could be a performance killer, and
5899 md should be large enough anyway.
5902 *) New file apps/app_rand.c with commonly needed functionality
5903 for handling the random seed file.
5905 Use the random seed file in some applications that previously did not:
5907 dsaparam -genkey (which also ignored its '-rand' option),
5910 x509 (when signing).
5911 Except on systems with /dev/urandom, it is crucial to have a random
5912 seed file at least for key creation, DSA signing, and for DH exchanges;
5913 for RSA signatures we could do without one.
5915 gendh and gendsa (unlike genrsa) used to read only the first byte
5916 of each file listed in the '-rand' option. The function as previously
5917 found in genrsa is now in app_rand.c and is used by all programs
5918 that support '-rand'.
5921 *) In RAND_write_file, use mode 0600 for creating files;
5922 don't just chmod when it may be too late.
5925 *) Report an error from X509_STORE_load_locations
5926 when X509_LOOKUP_load_file or X509_LOOKUP_add_dir failed.
5929 *) New function ASN1_mbstring_copy() this copies a string in either
5930 ASCII, Unicode, Universal (4 bytes per character) or UTF8 format
5931 into an ASN1_STRING type. A mask of permissible types is passed
5932 and it chooses the "minimal" type to use or an error if not type
5936 *) Add function equivalents to the various macros in asn1.h. The old
5937 macros are retained with an M_ prefix. Code inside the library can
5938 use the M_ macros. External code (including the openssl utility)
5939 should *NOT* in order to be "shared library friendly".
5942 *) Add various functions that can check a certificate's extensions
5943 to see if it usable for various purposes such as SSL client,
5944 server or S/MIME and CAs of these types. This is currently
5945 VERY EXPERIMENTAL but will ultimately be used for certificate chain
5946 verification. Also added a -purpose flag to x509 utility to
5947 print out all the purposes.
5950 *) Add a CRYPTO_EX_DATA to X509 certificate structure and associated
5954 *) New X509V3_{X509,CRL,REVOKED}_get_d2i() functions. These will search
5955 for, obtain and decode and extension and obtain its critical flag.
5956 This allows all the necessary extension code to be handled in a
5957 single function call.
5960 *) RC4 tune-up featuring 30-40% performance improvement on most RISC
5961 platforms. See crypto/rc4/rc4_enc.c for further details.
5964 *) New -noout option to asn1parse. This causes no output to be produced
5965 its main use is when combined with -strparse and -out to extract data
5966 from a file (which may not be in ASN.1 format).
5969 *) Fix for pkcs12 program. It was hashing an invalid certificate pointer
5970 when producing the local key id.
5971 [Richard Levitte <levitte@stacken.kth.se>]
5973 *) New option -dhparam in s_server. This allows a DH parameter file to be
5974 stated explicitly. If it is not stated then it tries the first server
5975 certificate file. The previous behaviour hard coded the filename
5979 *) Add -pubin and -pubout options to the rsa and dsa commands. These allow
5980 a public key to be input or output. For example:
5981 openssl rsa -in key.pem -pubout -out pubkey.pem
5982 Also added necessary DSA public key functions to handle this.
5985 *) Fix so PKCS7_dataVerify() doesn't crash if no certificates are contained
5986 in the message. This was handled by allowing
5987 X509_find_by_issuer_and_serial() to tolerate a NULL passed to it.
5988 [Steve Henson, reported by Sampo Kellomaki <sampo@mail.neuronio.pt>]
5990 *) Fix for bug in d2i_ASN1_bytes(): other ASN1 functions add an extra null
5991 to the end of the strings whereas this didn't. This would cause problems
5992 if strings read with d2i_ASN1_bytes() were later modified.
5993 [Steve Henson, reported by Arne Ansper <arne@ats.cyber.ee>]
5995 *) Fix for base64 decode bug. When a base64 bio reads only one line of
5996 data and it contains EOF it will end up returning an error. This is
5997 caused by input 46 bytes long. The cause is due to the way base64
5998 BIOs find the start of base64 encoded data. They do this by trying a
5999 trial decode on each line until they find one that works. When they
6000 do a flag is set and it starts again knowing it can pass all the
6001 data directly through the decoder. Unfortunately it doesn't reset
6002 the context it uses. This means that if EOF is reached an attempt
6003 is made to pass two EOFs through the context and this causes the
6004 resulting error. This can also cause other problems as well. As is
6005 usual with these problems it takes *ages* to find and the fix is
6006 trivial: move one line.
6007 [Steve Henson, reported by ian@uns.ns.ac.yu (Ivan Nejgebauer) ]
6009 *) Ugly workaround to get s_client and s_server working under Windows. The
6010 old code wouldn't work because it needed to select() on sockets and the
6011 tty (for keypresses and to see if data could be written). Win32 only
6012 supports select() on sockets so we select() with a 1s timeout on the
6013 sockets and then see if any characters are waiting to be read, if none
6014 are present then we retry, we also assume we can always write data to
6015 the tty. This isn't nice because the code then blocks until we've
6016 received a complete line of data and it is effectively polling the
6017 keyboard at 1s intervals: however it's quite a bit better than not
6018 working at all :-) A dedicated Windows application might handle this
6019 with an event loop for example.
6022 *) Enhance RSA_METHOD structure. Now there are two extra methods, rsa_sign
6023 and rsa_verify. When the RSA_FLAGS_SIGN_VER option is set these functions
6024 will be called when RSA_sign() and RSA_verify() are used. This is useful
6025 if rsa_pub_dec() and rsa_priv_enc() equivalents are not available.
6026 For this to work properly RSA_public_decrypt() and RSA_private_encrypt()
6027 should *not* be used: RSA_sign() and RSA_verify() must be used instead.
6028 This necessitated the support of an extra signature type NID_md5_sha1
6029 for SSL signatures and modifications to the SSL library to use it instead
6030 of calling RSA_public_decrypt() and RSA_private_encrypt().
6033 *) Add new -verify -CAfile and -CApath options to the crl program, these
6034 will lookup a CRL issuers certificate and verify the signature in a
6035 similar way to the verify program. Tidy up the crl program so it
6036 no longer accesses structures directly. Make the ASN1 CRL parsing a bit
6037 less strict. It will now permit CRL extensions even if it is not
6038 a V2 CRL: this will allow it to tolerate some broken CRLs.
6041 *) Initialize all non-automatic variables each time one of the openssl
6042 sub-programs is started (this is necessary as they may be started
6043 multiple times from the "OpenSSL>" prompt).
6044 [Lennart Bang, Bodo Moeller]
6046 *) Preliminary compilation option RSA_NULL which disables RSA crypto without
6047 removing all other RSA functionality (this is what NO_RSA does). This
6048 is so (for example) those in the US can disable those operations covered
6049 by the RSA patent while allowing storage and parsing of RSA keys and RSA
6053 *) Non-copying interface to BIO pairs.
6054 (still largely untested)
6057 *) New function ANS1_tag2str() to convert an ASN1 tag to a descriptive
6058 ASCII string. This was handled independently in various places before.
6061 *) New functions UTF8_getc() and UTF8_putc() that parse and generate
6062 UTF8 strings a character at a time.
6065 *) Use client_version from client hello to select the protocol
6066 (s23_srvr.c) and for RSA client key exchange verification
6067 (s3_srvr.c), as required by the SSL 3.0/TLS 1.0 specifications.
6070 *) Add various utility functions to handle SPKACs, these were previously
6071 handled by poking round in the structure internals. Added new function
6072 NETSCAPE_SPKI_print() to print out SPKAC and a new utility 'spkac' to
6073 print, verify and generate SPKACs. Based on an original idea from
6074 Massimiliano Pala <madwolf@comune.modena.it> but extensively modified.
6077 *) RIPEMD160 is operational on all platforms and is back in 'make test'.
6080 *) Allow the config file extension section to be overwritten on the
6081 command line. Based on an original idea from Massimiliano Pala
6082 <madwolf@comune.modena.it>. The new option is called -extensions
6083 and can be applied to ca, req and x509. Also -reqexts to override
6084 the request extensions in req and -crlexts to override the crl extensions
6088 *) Add new feature to the SPKAC handling in ca. Now you can include
6089 the same field multiple times by preceding it by "XXXX." for example:
6092 this is the same syntax as used in the req config file.
6095 *) Allow certificate extensions to be added to certificate requests. These
6096 are specified in a 'req_extensions' option of the req section of the
6097 config file. They can be printed out with the -text option to req but
6098 are otherwise ignored at present.
6101 *) Fix a horrible bug in enc_read() in crypto/evp/bio_enc.c: if the first
6102 data read consists of only the final block it would not decrypted because
6103 EVP_CipherUpdate() would correctly report zero bytes had been decrypted.
6104 A misplaced 'break' also meant the decrypted final block might not be
6105 copied until the next read.
6108 *) Initial support for DH_METHOD. Again based on RSA_METHOD. Also added
6109 a few extra parameters to the DH structure: these will be useful if
6110 for example we want the value of 'q' or implement X9.42 DH.
6113 *) Initial support for DSA_METHOD. This is based on the RSA_METHOD and
6114 provides hooks that allow the default DSA functions or functions on a
6115 "per key" basis to be replaced. This allows hardware acceleration and
6116 hardware key storage to be handled without major modification to the
6117 library. Also added low level modexp hooks and CRYPTO_EX structure and
6118 associated functions.
6121 *) Add a new flag to memory BIOs, BIO_FLAG_MEM_RDONLY. This marks the BIO
6122 as "read only": it can't be written to and the buffer it points to will
6123 not be freed. Reading from a read only BIO is much more efficient than
6124 a normal memory BIO. This was added because there are several times when
6125 an area of memory needs to be read from a BIO. The previous method was
6126 to create a memory BIO and write the data to it, this results in two
6127 copies of the data and an O(n^2) reading algorithm. There is a new
6128 function BIO_new_mem_buf() which creates a read only memory BIO from
6129 an area of memory. Also modified the PKCS#7 routines to use read only
6133 *) Bugfix: ssl23_get_client_hello did not work properly when called in
6134 state SSL23_ST_SR_CLNT_HELLO_B, i.e. when the first 7 bytes of
6135 a SSLv2-compatible client hello for SSLv3 or TLSv1 could be read,
6136 but a retry condition occured while trying to read the rest.
6139 *) The PKCS7_ENC_CONTENT_new() function was setting the content type as
6140 NID_pkcs7_encrypted by default: this was wrong since this should almost
6141 always be NID_pkcs7_data. Also modified the PKCS7_set_type() to handle
6142 the encrypted data type: this is a more sensible place to put it and it
6143 allows the PKCS#12 code to be tidied up that duplicated this
6147 *) Changed obj_dat.pl script so it takes its input and output files on
6148 the command line. This should avoid shell escape redirection problems
6152 *) Initial support for certificate extension requests, these are included
6153 in things like Xenroll certificate requests. Included functions to allow
6154 extensions to be obtained and added.
6157 *) -crlf option to s_client and s_server for sending newlines as
6158 CRLF (as required by many protocols).
6161 Changes between 0.9.3a and 0.9.4 [09 Aug 1999]
6163 *) Install libRSAglue.a when OpenSSL is built with RSAref.
6164 [Ralf S. Engelschall]
6166 *) A few more ``#ifndef NO_FP_API / #endif'' pairs for consistency.
6167 [Andrija Antonijevic <TheAntony2@bigfoot.com>]
6169 *) Fix -startdate and -enddate (which was missing) arguments to 'ca'
6173 *) New function DSA_dup_DH, which duplicates DSA parameters/keys as
6174 DH parameters/keys (q is lost during that conversion, but the resulting
6175 DH parameters contain its length).
6177 For 1024-bit p, DSA_generate_parameters followed by DSA_dup_DH is
6178 much faster than DH_generate_parameters (which creates parameters
6179 where p = 2*q + 1), and also the smaller q makes DH computations
6180 much more efficient (160-bit exponentiation instead of 1024-bit
6181 exponentiation); so this provides a convenient way to support DHE
6182 ciphersuites in SSL/TLS servers (see ssl/ssltest.c). It is of
6183 utter importance to use
6184 SSL_CTX_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6186 SSL_set_options(s_ctx, SSL_OP_SINGLE_DH_USE);
6187 when such DH parameters are used, because otherwise small subgroup
6188 attacks may become possible!
6191 *) Avoid memory leak in i2d_DHparams.
6194 *) Allow the -k option to be used more than once in the enc program:
6195 this allows the same encrypted message to be read by multiple recipients.
6198 *) New function OBJ_obj2txt(buf, buf_len, a, no_name), this converts
6199 an ASN1_OBJECT to a text string. If the "no_name" parameter is set then
6200 it will always use the numerical form of the OID, even if it has a short
6204 *) Added an extra RSA flag: RSA_FLAG_EXT_PKEY. Previously the rsa_mod_exp
6205 method only got called if p,q,dmp1,dmq1,iqmp components were present,
6206 otherwise bn_mod_exp was called. In the case of hardware keys for example
6207 no private key components need be present and it might store extra data
6208 in the RSA structure, which cannot be accessed from bn_mod_exp.
6209 By setting RSA_FLAG_EXT_PKEY rsa_mod_exp will always be called for
6210 private key operations.
6213 *) Added support for SPARC Linux.
6216 *) pem_password_cb function type incompatibly changed from
6217 typedef int pem_password_cb(char *buf, int size, int rwflag);
6219 ....(char *buf, int size, int rwflag, void *userdata);
6220 so that applications can pass data to their callbacks:
6221 The PEM[_ASN1]_{read,write}... functions and macros now take an
6222 additional void * argument, which is just handed through whenever
6223 the password callback is called.
6224 [Damien Miller <dmiller@ilogic.com.au>; tiny changes by Bodo Moeller]
6226 New function SSL_CTX_set_default_passwd_cb_userdata.
6228 Compatibility note: As many C implementations push function arguments
6229 onto the stack in reverse order, the new library version is likely to
6230 interoperate with programs that have been compiled with the old
6231 pem_password_cb definition (PEM_whatever takes some data that
6232 happens to be on the stack as its last argument, and the callback
6233 just ignores this garbage); but there is no guarantee whatsoever that
6236 *) The -DPLATFORM="\"$(PLATFORM)\"" definition and the similar -DCFLAGS=...
6237 (both in crypto/Makefile.ssl for use by crypto/cversion.c) caused
6238 problems not only on Windows, but also on some Unix platforms.
6239 To avoid problematic command lines, these definitions are now in an
6240 auto-generated file crypto/buildinf.h (created by crypto/Makefile.ssl
6241 for standard "make" builds, by util/mk1mf.pl for "mk1mf" builds).
6244 *) MIPS III/IV assembler module is reimplemented.
6247 *) More DES library cleanups: remove references to srand/rand and
6248 delete an unused file.
6251 *) Add support for the the free Netwide assembler (NASM) under Win32,
6252 since not many people have MASM (ml) and it can be hard to obtain.
6253 This is currently experimental but it seems to work OK and pass all
6254 the tests. Check out INSTALL.W32 for info.
6257 *) Fix memory leaks in s3_clnt.c: All non-anonymous SSL3/TLS1 connections
6258 without temporary keys kept an extra copy of the server key,
6259 and connections with temporary keys did not free everything in case
6263 *) New function RSA_check_key and new openssl rsa option -check
6264 for verifying the consistency of RSA keys.
6265 [Ulf Moeller, Bodo Moeller]
6267 *) Various changes to make Win32 compile work:
6268 1. Casts to avoid "loss of data" warnings in p5_crpt2.c
6269 2. Change unsigned int to int in b_dump.c to avoid "signed/unsigned
6270 comparison" warnings.
6271 3. Add sk_<TYPE>_sort to DEF file generator and do make update.
6274 *) Add a debugging option to PKCS#5 v2 key generation function: when
6275 you #define DEBUG_PKCS5V2 passwords, salts, iteration counts and
6276 derived keys are printed to stderr.
6279 *) Copy the flags in ASN1_STRING_dup().
6280 [Roman E. Pavlov <pre@mo.msk.ru>]
6282 *) The x509 application mishandled signing requests containing DSA
6283 keys when the signing key was also DSA and the parameters didn't match.
6285 It was supposed to omit the parameters when they matched the signing key:
6286 the verifying software was then supposed to automatically use the CA's
6287 parameters if they were absent from the end user certificate.
6289 Omitting parameters is no longer recommended. The test was also
6290 the wrong way round! This was probably due to unusual behaviour in
6291 EVP_cmp_parameters() which returns 1 if the parameters match.
6292 This meant that parameters were omitted when they *didn't* match and
6293 the certificate was useless. Certificates signed with 'ca' didn't have
6295 [Steve Henson, reported by Doug Erickson <Doug.Erickson@Part.NET>]
6297 *) Memory leak checking (-DCRYPTO_MDEBUG) had some problems.
6298 The interface is as follows:
6299 Applications can use
6300 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON) aka MemCheck_start(),
6301 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF) aka MemCheck_stop();
6302 "off" is now the default.
6303 The library internally uses
6304 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE) aka MemCheck_off(),
6305 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE) aka MemCheck_on()
6306 to disable memory-checking temporarily.
6308 Some inconsistent states that previously were possible (and were
6309 even the default) are now avoided.
6311 -DCRYPTO_MDEBUG_TIME is new and additionally stores the current time
6312 with each memory chunk allocated; this is occasionally more helpful
6313 than just having a counter.
6315 -DCRYPTO_MDEBUG_THREAD is also new and adds the thread ID.
6317 -DCRYPTO_MDEBUG_ALL enables all of the above, plus any future
6321 *) Introduce "mode" for SSL structures (with defaults in SSL_CTX),
6322 which largely parallels "options", but is for changing API behaviour,
6323 whereas "options" are about protocol behaviour.
6324 Initial "mode" flags are:
6326 SSL_MODE_ENABLE_PARTIAL_WRITE Allow SSL_write to report success when
6327 a single record has been written.
6328 SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER Don't insist that SSL_write
6329 retries use the same buffer location.
6330 (But all of the contents must be
6334 *) Bugfix: SSL_set_options ignored its parameter, only SSL_CTX_set_options
6337 *) Fix problems with no-hmac etc.
6338 [Ulf Möller, pointed out by Brian Wellington <bwelling@tislabs.com>]
6340 *) New functions RSA_get_default_method(), RSA_set_method() and
6341 RSA_get_method(). These allows replacement of RSA_METHODs without having
6342 to mess around with the internals of an RSA structure.
6345 *) Fix memory leaks in DSA_do_sign and DSA_is_prime.
6346 Also really enable memory leak checks in openssl.c and in some
6348 [Chad C. Mulligan, Bodo Moeller]
6350 *) Fix a bug in d2i_ASN1_INTEGER() and i2d_ASN1_INTEGER() which can mess
6351 up the length of negative integers. This has now been simplified to just
6352 store the length when it is first determined and use it later, rather
6353 than trying to keep track of where data is copied and updating it to
6355 [Steve Henson, reported by Brien Wheeler
6356 <bwheeler@authentica-security.com>]
6358 *) Add a new function PKCS7_signatureVerify. This allows the verification
6359 of a PKCS#7 signature but with the signing certificate passed to the
6360 function itself. This contrasts with PKCS7_dataVerify which assumes the
6361 certificate is present in the PKCS#7 structure. This isn't always the
6362 case: certificates can be omitted from a PKCS#7 structure and be
6363 distributed by "out of band" means (such as a certificate database).
6366 *) Complete the PEM_* macros with DECLARE_PEM versions to replace the
6367 function prototypes in pem.h, also change util/mkdef.pl to add the
6368 necessary function names.
6371 *) mk1mf.pl (used by Windows builds) did not properly read the
6372 options set by Configure in the top level Makefile, and Configure
6373 was not even able to write more than one option correctly.
6374 Fixed, now "no-idea no-rc5 -DCRYPTO_MDEBUG" etc. works as intended.
6377 *) New functions CONF_load_bio() and CONF_load_fp() to allow a config
6378 file to be loaded from a BIO or FILE pointer. The BIO version will
6379 for example allow memory BIOs to contain config info.
6382 *) New function "CRYPTO_num_locks" that returns CRYPTO_NUM_LOCKS.
6383 Whoever hopes to achieve shared-library compatibility across versions
6384 must use this, not the compile-time macro.
6385 (Exercise 0.9.4: Which is the minimum library version required by
6387 Note: All this applies only to multi-threaded programs, others don't
6391 *) Add missing case to s3_clnt.c state machine -- one of the new SSL tests
6392 through a BIO pair triggered the default case, i.e.
6393 SSLerr(...,SSL_R_UNKNOWN_STATE).
6396 *) New "BIO pair" concept (crypto/bio/bss_bio.c) so that applications
6397 can use the SSL library even if none of the specific BIOs is
6401 *) Fix a bug in i2d_DSAPublicKey() which meant it returned the wrong value
6402 for the encoded length.
6403 [Jeon KyoungHo <khjeon@sds.samsung.co.kr>]
6405 *) Add initial documentation of the X509V3 functions.
6408 *) Add a new pair of functions PEM_write_PKCS8PrivateKey() and
6409 PEM_write_bio_PKCS8PrivateKey() that are equivalent to
6410 PEM_write_PrivateKey() and PEM_write_bio_PrivateKey() but use the more
6411 secure PKCS#8 private key format with a high iteration count.
6414 *) Fix determination of Perl interpreter: A perl or perl5
6415 _directory_ in $PATH was also accepted as the interpreter.
6416 [Ralf S. Engelschall]
6418 *) Fix demos/sign/sign.c: well there wasn't anything strictly speaking
6419 wrong with it but it was very old and did things like calling
6420 PEM_ASN1_read() directly and used MD5 for the hash not to mention some
6424 *) Fix demos/selfsign.c: it used obsolete and deleted functions, changed
6425 to use the new extension code.
6428 *) Implement the PEM_read/PEM_write functions in crypto/pem/pem_all.c
6429 with macros. This should make it easier to change their form, add extra
6430 arguments etc. Fix a few PEM prototypes which didn't have cipher as a
6434 *) Add to configuration table a new entry that can specify an alternative
6435 name for unistd.h (for pre-POSIX systems); we need this for NeXTstep,
6436 according to Mark Crispin <MRC@Panda.COM>.
6440 *) DES CBC did not update the IV. Weird.
6443 des_cbc_encrypt does not update the IV, but des_ncbc_encrypt does.
6444 Changing the behaviour of the former might break existing programs --
6445 where IV updating is needed, des_ncbc_encrypt can be used.
6448 *) When bntest is run from "make test" it drives bc to check its
6449 calculations, as well as internally checking them. If an internal check
6450 fails, it needs to cause bc to give a non-zero result or make test carries
6451 on without noticing the failure. Fixed.
6454 *) DES library cleanups.
6457 *) Add support for PKCS#5 v2.0 PBE algorithms. This will permit PKCS#8 to be
6458 used with any cipher unlike PKCS#5 v1.5 which can at most handle 64 bit
6459 ciphers. NOTE: although the key derivation function has been verified
6460 against some published test vectors it has not been extensively tested
6461 yet. Added a -v2 "cipher" option to pkcs8 application to allow the use
6465 *) Instead of "mkdir -p", which is not fully portable, use new
6466 Perl script "util/mkdir-p.pl".
6469 *) Rewrite the way password based encryption (PBE) is handled. It used to
6470 assume that the ASN1 AlgorithmIdentifier parameter was a PBEParameter
6471 structure. This was true for the PKCS#5 v1.5 and PKCS#12 PBE algorithms
6472 but doesn't apply to PKCS#5 v2.0 where it can be something else. Now
6473 the 'parameter' field of the AlgorithmIdentifier is passed to the
6474 underlying key generation function so it must do its own ASN1 parsing.
6475 This has also changed the EVP_PBE_CipherInit() function which now has a
6476 'parameter' argument instead of literal salt and iteration count values
6477 and the function EVP_PBE_ALGOR_CipherInit() has been deleted.
6480 *) Support for PKCS#5 v1.5 compatible password based encryption algorithms
6481 and PKCS#8 functionality. New 'pkcs8' application linked to openssl.
6482 Needed to change the PEM_STRING_EVP_PKEY value which was just "PRIVATE
6483 KEY" because this clashed with PKCS#8 unencrypted string. Since this
6484 value was just used as a "magic string" and not used directly its
6485 value doesn't matter.
6488 *) Introduce some semblance of const correctness to BN. Shame C doesn't
6492 *) "linux-sparc64" configuration (ultrapenguin).
6493 [Ray Miller <ray.miller@oucs.ox.ac.uk>]
6494 "linux-sparc" configuration.
6495 [Christian Forster <fo@hawo.stw.uni-erlangen.de>]
6497 *) config now generates no-xxx options for missing ciphers.
6500 *) Support the EBCDIC character set (work in progress).
6501 File ebcdic.c not yet included because it has a different license.
6502 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6504 *) Support BS2000/OSD-POSIX.
6505 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>]
6507 *) Make callbacks for key generation use void * instead of char *.
6510 *) Make S/MIME samples compile (not yet tested).
6513 *) Additional typesafe stacks.
6516 *) New configuration variants "bsdi-elf-gcc" (BSD/OS 4.x).
6520 Changes between 0.9.3 and 0.9.3a [29 May 1999]
6522 *) New configuration variant "sco5-gcc".
6524 *) Updated some demos.
6525 [Sean O Riordain, Wade Scholine]
6527 *) Add missing BIO_free at exit of pkcs12 application.
6530 *) Fix memory leak in conf.c.
6533 *) Updates for Win32 to assembler version of MD5.
6536 *) Set #! path to perl in apps/der_chop to where we found it
6537 instead of using a fixed path.
6540 *) SHA library changes for irix64-mips4-cc.
6543 *) Improvements for VMS support.
6547 Changes between 0.9.2b and 0.9.3 [24 May 1999]
6549 *) Bignum library bug fix. IRIX 6 passes "make test" now!
6550 This also avoids the problems with SC4.2 and unpatched SC5.
6551 [Andy Polyakov <appro@fy.chalmers.se>]
6553 *) New functions sk_num, sk_value and sk_set to replace the previous macros.
6554 These are required because of the typesafe stack would otherwise break
6555 existing code. If old code used a structure member which used to be STACK
6556 and is now STACK_OF (for example cert in a PKCS7_SIGNED structure) with
6557 sk_num or sk_value it would produce an error because the num, data members
6558 are not present in STACK_OF. Now it just produces a warning. sk_set
6559 replaces the old method of assigning a value to sk_value
6560 (e.g. sk_value(x, i) = y) which the library used in a few cases. Any code
6561 that does this will no longer work (and should use sk_set instead) but
6562 this could be regarded as a "questionable" behaviour anyway.
6565 *) Fix most of the other PKCS#7 bugs. The "experimental" code can now
6566 correctly handle encrypted S/MIME data.
6569 *) Change type of various DES function arguments from des_cblock
6570 (which means, in function argument declarations, pointer to char)
6571 to des_cblock * (meaning pointer to array with 8 char elements),
6572 which allows the compiler to do more typechecking; it was like
6573 that back in SSLeay, but with lots of ugly casts.
6575 Introduce new type const_des_cblock.
6578 *) Reorganise the PKCS#7 library and get rid of some of the more obvious
6579 problems: find RecipientInfo structure that matches recipient certificate
6580 and initialise the ASN1 structures properly based on passed cipher.
6583 *) Belatedly make the BN tests actually check the results.
6586 *) Fix the encoding and decoding of negative ASN1 INTEGERS and conversion
6587 to and from BNs: it was completely broken. New compilation option
6588 NEG_PUBKEY_BUG to allow for some broken certificates that encode public
6589 key elements as negative integers.
6592 *) Reorganize and speed up MD5.
6593 [Andy Polyakov <appro@fy.chalmers.se>]
6596 [Richard Levitte <richard@levitte.org>]
6598 *) New option -out to asn1parse to allow the parsed structure to be
6599 output to a file. This is most useful when combined with the -strparse
6600 option to examine the output of things like OCTET STRINGS.
6603 *) Make SSL library a little more fool-proof by not requiring any longer
6604 that SSL_set_{accept,connect}_state be called before
6605 SSL_{accept,connect} may be used (SSL_set_..._state is omitted
6606 in many applications because usually everything *appeared* to work as
6607 intended anyway -- now it really works as intended).
6610 *) Move openssl.cnf out of lib/.
6613 *) Fix various things to let OpenSSL even pass ``egcc -pipe -O2 -Wall
6614 -Wshadow -Wpointer-arith -Wcast-align -Wmissing-prototypes
6615 -Wmissing-declarations -Wnested-externs -Winline'' with EGCS 1.1.2+
6616 [Ralf S. Engelschall]
6618 *) Various fixes to the EVP and PKCS#7 code. It may now be able to
6619 handle PKCS#7 enveloped data properly.
6620 [Sebastian Akerman <sak@parallelconsulting.com>, modified by Steve]
6622 *) Create a duplicate of the SSL_CTX's CERT in SSL_new instead of
6623 copying pointers. The cert_st handling is changed by this in
6624 various ways (and thus what used to be known as ctx->default_cert
6625 is now called ctx->cert, since we don't resort to s->ctx->[default_]cert
6626 any longer when s->cert does not give us what we need).
6627 ssl_cert_instantiate becomes obsolete by this change.
6628 As soon as we've got the new code right (possibly it already is?),
6629 we have solved a couple of bugs of the earlier code where s->cert
6630 was used as if it could not have been shared with other SSL structures.
6632 Note that using the SSL API in certain dirty ways now will result
6633 in different behaviour than observed with earlier library versions:
6634 Changing settings for an SSL_CTX *ctx after having done s = SSL_new(ctx)
6635 does not influence s as it used to.
6637 In order to clean up things more thoroughly, inside SSL_SESSION
6638 we don't use CERT any longer, but a new structure SESS_CERT
6639 that holds per-session data (if available); currently, this is
6640 the peer's certificate chain and, for clients, the server's certificate
6641 and temporary key. CERT holds only those values that can have
6642 meaningful defaults in an SSL_CTX.
6645 *) New function X509V3_EXT_i2d() to create an X509_EXTENSION structure
6646 from the internal representation. Various PKCS#7 fixes: remove some
6647 evil casts and set the enc_dig_alg field properly based on the signing
6651 *) Allow PKCS#12 password to be set from the command line or the
6652 environment. Let 'ca' get its config file name from the environment
6653 variables "OPENSSL_CONF" or "SSLEAY_CONF" (for consistency with 'req'
6657 *) Allow certificate policies extension to use an IA5STRING for the
6658 organization field. This is contrary to the PKIX definition but
6659 VeriSign uses it and IE5 only recognises this form. Document 'x509'
6663 *) Add PEDANTIC compiler flag to allow compilation with gcc -pedantic,
6664 without disallowing inline assembler and the like for non-pedantic builds.
6667 *) Support Borland C++ builder.
6668 [Janez Jere <jj@void.si>, modified by Ulf Möller]
6673 *) SHA-1 cleanups and performance enhancements.
6674 [Andy Polyakov <appro@fy.chalmers.se>]
6676 *) Sparc v8plus assembler for the bignum library.
6677 [Andy Polyakov <appro@fy.chalmers.se>]
6679 *) Accept any -xxx and +xxx compiler options in Configure.
6682 *) Update HPUX configuration.
6685 *) Add missing sk_<type>_unshift() function to safestack.h
6686 [Ralf S. Engelschall]
6688 *) New function SSL_CTX_use_certificate_chain_file that sets the
6689 "extra_cert"s in addition to the certificate. (This makes sense
6690 only for "PEM" format files, as chains as a whole are not
6694 *) Support verify_depth from the SSL API.
6695 x509_vfy.c had what can be considered an off-by-one-error:
6696 Its depth (which was not part of the external interface)
6697 was actually counting the number of certificates in a chain;
6698 now it really counts the depth.
6701 *) Bugfix in crypto/x509/x509_cmp.c: The SSLerr macro was used
6702 instead of X509err, which often resulted in confusing error
6703 messages since the error codes are not globally unique
6704 (e.g. an alleged error in ssl3_accept when a certificate
6705 didn't match the private key).
6707 *) New function SSL_CTX_set_session_id_context that allows to set a default
6708 value (so that you don't need SSL_set_session_id_context for each
6709 connection using the SSL_CTX).
6712 *) OAEP decoding bug fix.
6715 *) Support INSTALL_PREFIX for package builders, as proposed by
6719 *) New Configure options "threads" and "no-threads". For systems
6720 where the proper compiler options are known (currently Solaris
6721 and Linux), "threads" is the default.
6724 *) New script util/mklink.pl as a faster substitute for util/mklink.sh.
6727 *) Install various scripts to $(OPENSSLDIR)/misc, not to
6728 $(INSTALLTOP)/bin -- they shouldn't clutter directories
6729 such as /usr/local/bin.
6732 *) "make linux-shared" to build shared libraries.
6733 [Niels Poppe <niels@netbox.org>]
6735 *) New Configure option no-<cipher> (rsa, idea, rc5, ...).
6738 *) Add the PKCS#12 API documentation to openssl.txt. Preliminary support for
6739 extension adding in x509 utility.
6742 *) Remove NOPROTO sections and error code comments.
6745 *) Partial rewrite of the DEF file generator to now parse the ANSI
6749 *) New Configure options --prefix=DIR and --openssldir=DIR.
6752 *) Complete rewrite of the error code script(s). It is all now handled
6753 by one script at the top level which handles error code gathering,
6754 header rewriting and C source file generation. It should be much better
6755 than the old method: it now uses a modified version of Ulf's parser to
6756 read the ANSI prototypes in all header files (thus the old K&R definitions
6757 aren't needed for error creation any more) and do a better job of
6758 translating function codes into names. The old 'ASN1 error code imbedded
6759 in a comment' is no longer necessary and it doesn't use .err files which
6760 have now been deleted. Also the error code call doesn't have to appear all
6761 on one line (which resulted in some large lines...).
6764 *) Change #include filenames from <foo.h> to <openssl/foo.h>.
6767 *) Change behaviour of ssl2_read when facing length-0 packets: Don't return
6768 0 (which usually indicates a closed connection), but continue reading.
6771 *) Fix some race conditions.
6774 *) Add support for CRL distribution points extension. Add Certificate
6775 Policies and CRL distribution points documentation.
6778 *) Move the autogenerated header file parts to crypto/opensslconf.h.
6781 *) Fix new 56-bit DES export ciphersuites: they were using 7 bytes instead of
6782 8 of keying material. Merlin has also confirmed interop with this fix
6783 between OpenSSL and Baltimore C/SSL 2.0 and J/SSL 2.0.
6784 [Merlin Hughes <merlin@baltimore.ie>]
6786 *) Fix lots of warnings.
6787 [Richard Levitte <levitte@stacken.kth.se>]
6789 *) In add_cert_dir() in crypto/x509/by_dir.c, break out of the loop if
6790 the directory spec didn't end with a LIST_SEPARATOR_CHAR.
6791 [Richard Levitte <levitte@stacken.kth.se>]
6793 *) Fix problems with sizeof(long) == 8.
6794 [Andy Polyakov <appro@fy.chalmers.se>]
6796 *) Change functions to ANSI C.
6799 *) Fix typos in error codes.
6800 [Martin Kraemer <Martin.Kraemer@MchP.Siemens.De>, Ulf Möller]
6802 *) Remove defunct assembler files from Configure.
6805 *) SPARC v8 assembler BIGNUM implementation.
6806 [Andy Polyakov <appro@fy.chalmers.se>]
6808 *) Support for Certificate Policies extension: both print and set.
6809 Various additions to support the r2i method this uses.
6812 *) A lot of constification, and fix a bug in X509_NAME_oneline() that could
6813 return a const string when you are expecting an allocated buffer.
6816 *) Add support for ASN1 types UTF8String and VISIBLESTRING, also the CHOICE
6817 types DirectoryString and DisplayText.
6820 *) Add code to allow r2i extensions to access the configuration database,
6821 add an LHASH database driver and add several ctx helper functions.
6824 *) Fix an evil bug in bn_expand2() which caused various BN functions to
6825 fail when they extended the size of a BIGNUM.
6828 *) Various utility functions to handle SXNet extension. Modify mkdef.pl to
6829 support typesafe stack.
6832 *) Fix typo in SSL_[gs]et_options().
6833 [Nils Frostberg <nils@medcom.se>]
6835 *) Delete various functions and files that belonged to the (now obsolete)
6836 old X509V3 handling code.
6839 *) New Configure option "rsaref".
6842 *) Don't auto-generate pem.h.
6845 *) Introduce type-safe ASN.1 SETs.
6848 *) Convert various additional casted stacks to type-safe STACK_OF() variants.
6849 [Ben Laurie, Ralf S. Engelschall, Steve Henson]
6851 *) Introduce type-safe STACKs. This will almost certainly break lots of code
6852 that links with OpenSSL (well at least cause lots of warnings), but fear
6853 not: the conversion is trivial, and it eliminates loads of evil casts. A
6854 few STACKed things have been converted already. Feel free to convert more.
6855 In the fullness of time, I'll do away with the STACK type altogether.
6858 *) Add `openssl ca -revoke <certfile>' facility which revokes a certificate
6859 specified in <certfile> by updating the entry in the index.txt file.
6860 This way one no longer has to edit the index.txt file manually for
6861 revoking a certificate. The -revoke option does the gory details now.
6862 [Massimiliano Pala <madwolf@openca.org>, Ralf S. Engelschall]
6864 *) Fix `openssl crl -noout -text' combination where `-noout' killed the
6865 `-text' option at all and this way the `-noout -text' combination was
6866 inconsistent in `openssl crl' with the friends in `openssl x509|rsa|dsa'.
6867 [Ralf S. Engelschall]
6869 *) Make sure a corresponding plain text error message exists for the
6870 X509_V_ERR_CERT_REVOKED/23 error number which can occur when a
6871 verify callback function determined that a certificate was revoked.
6872 [Ralf S. Engelschall]
6874 *) Bugfix: In test/testenc, don't test "openssl <cipher>" for
6875 ciphers that were excluded, e.g. by -DNO_IDEA. Also, test
6876 all available cipers including rc5, which was forgotten until now.
6877 In order to let the testing shell script know which algorithms
6878 are available, a new (up to now undocumented) command
6879 "openssl list-cipher-commands" is used.
6882 *) Bugfix: s_client occasionally would sleep in select() when
6883 it should have checked SSL_pending() first.
6886 *) New functions DSA_do_sign and DSA_do_verify to provide access to
6887 the raw DSA values prior to ASN.1 encoding.
6890 *) Tweaks to Configure
6891 [Niels Poppe <niels@netbox.org>]
6893 *) Add support for PKCS#5 v2.0 ASN1 PBES2 structures. No other support,
6897 *) New variables $(RANLIB) and $(PERL) in the Makefiles.
6900 *) New config option to avoid instructions that are illegal on the 80386.
6901 The default code is faster, but requires at least a 486.
6904 *) Got rid of old SSL2_CLIENT_VERSION (inconsistently used) and
6905 SSL2_SERVER_VERSION (not used at all) macros, which are now the
6906 same as SSL2_VERSION anyway.
6909 *) New "-showcerts" option for s_client.
6912 *) Still more PKCS#12 integration. Add pkcs12 application to openssl
6913 application. Various cleanups and fixes.
6916 *) More PKCS#12 integration. Add new pkcs12 directory with Makefile.ssl and
6917 modify error routines to work internally. Add error codes and PBE init
6918 to library startup routines.
6921 *) Further PKCS#12 integration. Added password based encryption, PKCS#8 and
6922 packing functions to asn1 and evp. Changed function names and error
6923 codes along the way.
6926 *) PKCS12 integration: and so it begins... First of several patches to
6927 slowly integrate PKCS#12 functionality into OpenSSL. Add PKCS#12
6928 objects to objects.h
6931 *) Add a new 'indent' option to some X509V3 extension code. Initial ASN1
6932 and display support for Thawte strong extranet extension.
6935 *) Add LinuxPPC support.
6936 [Jeff Dubrule <igor@pobox.org>]
6938 *) Get rid of redundant BN file bn_mulw.c, and rename bn_div64 to
6939 bn_div_words in alpha.s.
6940 [Hannes Reinecke <H.Reinecke@hw.ac.uk> and Ben Laurie]
6942 *) Make sure the RSA OAEP test is skipped under -DRSAref because
6943 OAEP isn't supported when OpenSSL is built with RSAref.
6944 [Ulf Moeller <ulf@fitug.de>]
6946 *) Move definitions of IS_SET/IS_SEQUENCE inside crypto/asn1/asn1.h
6947 so they no longer are missing under -DNOPROTO.
6948 [Soren S. Jorvang <soren@t.dk>]
6951 Changes between 0.9.1c and 0.9.2b [22 Mar 1999]
6953 *) Make SSL_get_peer_cert_chain() work in servers. Unfortunately, it still
6954 doesn't work when the session is reused. Coming soon!
6957 *) Fix a security hole, that allows sessions to be reused in the wrong
6958 context thus bypassing client cert protection! All software that uses
6959 client certs and session caches in multiple contexts NEEDS PATCHING to
6960 allow session reuse! A fuller solution is in the works.
6961 [Ben Laurie, problem pointed out by Holger Reif, Bodo Moeller (and ???)]
6963 *) Some more source tree cleanups (removed obsolete files
6964 crypto/bf/asm/bf586.pl, test/test.txt and crypto/sha/asm/f.s; changed
6965 permission on "config" script to be executable) and a fix for the INSTALL
6967 [Ulf Moeller <ulf@fitug.de>]
6969 *) Remove some legacy and erroneous uses of malloc, free instead of
6971 [Lennart Bang <lob@netstream.se>, with minor changes by Steve]
6973 *) Make rsa_oaep_test return non-zero on error.
6974 [Ulf Moeller <ulf@fitug.de>]
6976 *) Add support for native Solaris shared libraries. Configure
6977 solaris-sparc-sc4-pic, make, then run shlib/solaris-sc4.sh. It'd be nice
6978 if someone would make that last step automatic.
6979 [Matthias Loepfe <Matthias.Loepfe@AdNovum.CH>]
6981 *) ctx_size was not built with the right compiler during "make links". Fixed.
6984 *) Change the meaning of 'ALL' in the cipher list. It now means "everything
6985 except NULL ciphers". This means the default cipher list will no longer
6986 enable NULL ciphers. They need to be specifically enabled e.g. with
6987 the string "DEFAULT:eNULL".
6990 *) Fix to RSA private encryption routines: if p < q then it would
6991 occasionally produce an invalid result. This will only happen with
6992 externally generated keys because OpenSSL (and SSLeay) ensure p > q.
6995 *) Be less restrictive and allow also `perl util/perlpath.pl
6996 /path/to/bin/perl' in addition to `perl util/perlpath.pl /path/to/bin',
6997 because this way one can also use an interpreter named `perl5' (which is
6998 usually the name of Perl 5.xxx on platforms where an Perl 4.x is still
6999 installed as `perl').
7000 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7002 *) Let util/clean-depend.pl work also with older Perl 5.00x versions.
7003 [Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7005 *) Fix Makefile.org so CC,CFLAG etc are passed to 'make links' add
7006 advapi32.lib to Win32 build and change the pem test comparision
7007 to fc.exe (thanks to Ulrich Kroener <kroneru@yahoo.com> for the
7008 suggestion). Fix misplaced ASNI prototypes and declarations in evp.h
7009 and crypto/des/ede_cbcm_enc.c.
7012 *) DES quad checksum was broken on big-endian architectures. Fixed.
7015 *) Comment out two functions in bio.h that aren't implemented. Fix up the
7016 Win32 test batch file so it (might) work again. The Win32 test batch file
7017 is horrible: I feel ill....
7020 *) Move various #ifdefs around so NO_SYSLOG, NO_DIRENT etc are now selected
7021 in e_os.h. Audit of header files to check ANSI and non ANSI
7022 sections: 10 functions were absent from non ANSI section and not exported
7023 from Windows DLLs. Fixed up libeay.num for new functions.
7026 *) Make `openssl version' output lines consistent.
7027 [Ralf S. Engelschall]
7029 *) Fix Win32 symbol export lists for BIO functions: Added
7030 BIO_get_ex_new_index, BIO_get_ex_num, BIO_get_ex_data and BIO_set_ex_data
7031 to ms/libeay{16,32}.def.
7032 [Ralf S. Engelschall]
7034 *) Second round of fixing the OpenSSL perl/ stuff. It now at least compiled
7035 fine under Unix and passes some trivial tests I've now added. But the
7036 whole stuff is horribly incomplete, so a README.1ST with a disclaimer was
7037 added to make sure no one expects that this stuff really works in the
7038 OpenSSL 0.9.2 release. Additionally I've started to clean the XS sources
7039 up and fixed a few little bugs and inconsistencies in OpenSSL.{pm,xs} and
7041 [Ralf S. Engelschall]
7043 *) Fix the generation of two part addresses in perl.
7044 [Kenji Miyake <kenji@miyake.org>, integrated by Ben Laurie]
7046 *) Add config entry for Linux on MIPS.
7047 [John Tobey <jtobey@channel1.com>]
7049 *) Make links whenever Configure is run, unless we are on Windoze.
7052 *) Permit extensions to be added to CRLs using crl_section in openssl.cnf.
7053 Currently only issuerAltName and AuthorityKeyIdentifier make any sense
7057 *) Add a useful kludge to allow package maintainers to specify compiler and
7058 other platforms details on the command line without having to patch the
7059 Configure script everytime: One now can use ``perl Configure
7060 <id>:<details>'', i.e. platform ids are allowed to have details appended
7061 to them (seperated by colons). This is treated as there would be a static
7062 pre-configured entry in Configure's %table under key <id> with value
7063 <details> and ``perl Configure <id>'' is called. So, when you want to
7064 perform a quick test-compile under FreeBSD 3.1 with pgcc and without
7065 assembler stuff you can use ``perl Configure "FreeBSD-elf:pgcc:-O6:::"''
7066 now, which overrides the FreeBSD-elf entry on-the-fly.
7067 [Ralf S. Engelschall]
7069 *) Disable new TLS1 ciphersuites by default: they aren't official yet.
7072 *) Allow DSO flags like -fpic, -fPIC, -KPIC etc. to be specified
7073 on the `perl Configure ...' command line. This way one can compile
7074 OpenSSL libraries with Position Independent Code (PIC) which is needed
7075 for linking it into DSOs.
7076 [Ralf S. Engelschall]
7078 *) Remarkably, export ciphers were totally broken and no-one had noticed!
7082 *) Cleaned up the LICENSE document: The official contact for any license
7083 questions now is the OpenSSL core team under openssl-core@openssl.org.
7084 And add a paragraph about the dual-license situation to make sure people
7085 recognize that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply
7086 to the OpenSSL toolkit.
7087 [Ralf S. Engelschall]
7089 *) General source tree makefile cleanups: Made `making xxx in yyy...'
7090 display consistent in the source tree and replaced `/bin/rm' by `rm'.
7091 Additonally cleaned up the `make links' target: Remove unnecessary
7092 semicolons, subsequent redundant removes, inline point.sh into mklink.sh
7093 to speed processing and no longer clutter the display with confusing
7094 stuff. Instead only the actually done links are displayed.
7095 [Ralf S. Engelschall]
7097 *) Permit null encryption ciphersuites, used for authentication only. It used
7098 to be necessary to set the preprocessor define SSL_ALLOW_ENULL to do this.
7099 It is now necessary to set SSL_FORBID_ENULL to prevent the use of null
7103 *) Add a bunch of fixes to the PKCS#7 stuff. It used to sometimes reorder
7104 signed attributes when verifying signatures (this would break them),
7105 the detached data encoding was wrong and public keys obtained using
7106 X509_get_pubkey() weren't freed.
7109 *) Add text documentation for the BUFFER functions. Also added a work around
7110 to a Win95 console bug. This was triggered by the password read stuff: the
7111 last character typed gets carried over to the next fread(). If you were
7112 generating a new cert request using 'req' for example then the last
7113 character of the passphrase would be CR which would then enter the first
7117 *) Added the new `Includes OpenSSL Cryptography Software' button as
7118 doc/openssl_button.{gif,html} which is similar in style to the old SSLeay
7119 button and can be used by applications based on OpenSSL to show the
7120 relationship to the OpenSSL project.
7121 [Ralf S. Engelschall]
7123 *) Remove confusing variables in function signatures in files
7124 ssl/ssl_lib.c and ssl/ssl.h.
7125 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7127 *) Don't install bss_file.c under PREFIX/include/
7128 [Lennart Bong <lob@kulthea.stacken.kth.se>]
7130 *) Get the Win32 compile working again. Modify mkdef.pl so it can handle
7131 functions that return function pointers and has support for NT specific
7132 stuff. Fix mk1mf.pl and VC-32.pl to support NT differences also. Various
7133 #ifdef WIN32 and WINNTs sprinkled about the place and some changes from
7134 unsigned to signed types: this was killing the Win32 compile.
7137 *) Add new certificate file to stack functions,
7138 SSL_add_dir_cert_subjects_to_stack() and
7139 SSL_add_file_cert_subjects_to_stack(). These largely supplant
7140 SSL_load_client_CA_file(), and can be used to add multiple certs easily
7141 to a stack (usually this is then handed to SSL_CTX_set_client_CA_list()).
7142 This means that Apache-SSL and similar packages don't have to mess around
7143 to add as many CAs as they want to the preferred list.
7146 *) Experiment with doxygen documentation. Currently only partially applied to
7148 See http://www.stack.nl/~dimitri/doxygen/index.html, and run doxygen with
7149 openssl.doxy as the configuration file.
7152 *) Get rid of remaining C++-style comments which strict C compilers hate.
7153 [Ralf S. Engelschall, pointed out by Carlos Amengual]
7155 *) Changed BN_RECURSION in bn_mont.c to BN_RECURSION_MONT so it is not
7156 compiled in by default: it has problems with large keys.
7159 *) Add a bunch of SSL_xxx() functions for configuring the temporary RSA and
7160 DH private keys and/or callback functions which directly correspond to
7161 their SSL_CTX_xxx() counterparts but work on a per-connection basis. This
7162 is needed for applications which have to configure certificates on a
7163 per-connection basis (e.g. Apache+mod_ssl) instead of a per-context basis
7165 For the RSA certificate situation is makes no difference, but
7166 for the DSA certificate situation this fixes the "no shared cipher"
7167 problem where the OpenSSL cipher selection procedure failed because the
7168 temporary keys were not overtaken from the context and the API provided
7169 no way to reconfigure them.
7170 The new functions now let applications reconfigure the stuff and they
7171 are in detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
7172 SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
7173 non-public-API function ssl_cert_instantiate() is used as a helper
7174 function and also to reduce code redundancy inside ssl_rsa.c.
7175 [Ralf S. Engelschall]
7177 *) Move s_server -dcert and -dkey options out of the undocumented feature
7178 area because they are useful for the DSA situation and should be
7179 recognized by the users.
7180 [Ralf S. Engelschall]
7182 *) Fix the cipher decision scheme for export ciphers: the export bits are
7183 *not* within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within
7184 SSL_EXP_MASK. So, the original variable has to be used instead of the
7185 already masked variable.
7186 [Richard Levitte <levitte@stacken.kth.se>]
7188 *) Fix 'port' variable from `int' to `unsigned int' in crypto/bio/b_sock.c
7189 [Richard Levitte <levitte@stacken.kth.se>]
7191 *) Change type of another md_len variable in pk7_doit.c:PKCS7_dataFinal()
7192 from `int' to `unsigned int' because it's a length and initialized by
7193 EVP_DigestFinal() which expects an `unsigned int *'.
7194 [Richard Levitte <levitte@stacken.kth.se>]
7196 *) Don't hard-code path to Perl interpreter on shebang line of Configure
7197 script. Instead use the usual Shell->Perl transition trick.
7198 [Ralf S. Engelschall]
7200 *) Make `openssl x509 -noout -modulus' functional also for DSA certificates
7201 (in addition to RSA certificates) to match the behaviour of `openssl dsa
7202 -noout -modulus' as it's already the case for `openssl rsa -noout
7203 -modulus'. For RSA the -modulus is the real "modulus" while for DSA
7204 currently the public key is printed (a decision which was already done by
7205 `openssl dsa -modulus' in the past) which serves a similar purpose.
7206 Additionally the NO_RSA no longer completely removes the whole -modulus
7207 option; it now only avoids using the RSA stuff. Same applies to NO_DSA
7209 [Ralf S. Engelschall]
7211 *) Add Arne Ansper's reliable BIO - this is an encrypted, block-digested
7212 BIO. See the source (crypto/evp/bio_ok.c) for more info.
7213 [Arne Ansper <arne@ats.cyber.ee>]
7215 *) Dump the old yucky req code that tried (and failed) to allow raw OIDs
7216 to be added. Now both 'req' and 'ca' can use new objects defined in the
7220 *) Add cool BIO that does syslog (or event log on NT).
7221 [Arne Ansper <arne@ats.cyber.ee>, integrated by Ben Laurie]
7223 *) Add support for new TLS ciphersuites, TLS_RSA_EXPORT56_WITH_RC4_56_MD5,
7224 TLS_RSA_EXPORT56_WITH_RC2_CBC_56_MD5 and
7225 TLS_RSA_EXPORT56_WITH_DES_CBC_SHA, as specified in "56-bit Export Cipher
7226 Suites For TLS", draft-ietf-tls-56-bit-ciphersuites-00.txt.
7229 *) Add preliminary config info for new extension code.
7232 *) Make RSA_NO_PADDING really use no padding.
7233 [Ulf Moeller <ulf@fitug.de>]
7235 *) Generate errors when private/public key check is done.
7238 *) Overhaul for 'crl' utility. New function X509_CRL_print. Partial support
7239 for some CRL extensions and new objects added.
7242 *) Really fix the ASN1 IMPLICIT bug this time... Partial support for private
7243 key usage extension and fuller support for authority key id.
7246 *) Add OAEP encryption for the OpenSSL crypto library. OAEP is the improved
7247 padding method for RSA, which is recommended for new applications in PKCS
7248 #1 v2.0 (RFC 2437, October 1998).
7249 OAEP (Optimal Asymmetric Encryption Padding) has better theoretical
7250 foundations than the ad-hoc padding used in PKCS #1 v1.5. It is secure
7251 against Bleichbacher's attack on RSA.
7252 [Ulf Moeller <ulf@fitug.de>, reformatted, corrected and integrated by
7255 *) Updates to the new SSL compression code
7256 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7258 *) Fix so that the version number in the master secret, when passed
7259 via RSA, checks that if TLS was proposed, but we roll back to SSLv3
7260 (because the server will not accept higher), that the version number
7261 is 0x03,0x01, not 0x03,0x00
7262 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7264 *) Run extensive memory leak checks on SSL apps. Fixed *lots* of memory
7265 leaks in ssl/ relating to new X509_get_pubkey() behaviour. Also fixes
7266 in apps/ and an unrelated leak in crypto/dsa/dsa_vrf.c
7269 *) Support for RAW extensions where an arbitrary extension can be
7270 created by including its DER encoding. See apps/openssl.cnf for
7274 *) Make sure latest Perl versions don't interpret some generated C array
7275 code as Perl array code in the crypto/err/err_genc.pl script.
7276 [Lars Weber <3weber@informatik.uni-hamburg.de>]
7278 *) Modify ms/do_ms.bat to not generate assembly language makefiles since
7279 not many people have the assembler. Various Win32 compilation fixes and
7280 update to the INSTALL.W32 file with (hopefully) more accurate Win32
7284 *) Modify configure script 'Configure' to automatically create crypto/date.h
7285 file under Win32 and also build pem.h from pem.org. New script
7286 util/mkfiles.pl to create the MINFO file on environments that can't do a
7287 'make files': perl util/mkfiles.pl >MINFO should work.
7290 *) Major rework of DES function declarations, in the pursuit of correctness
7291 and purity. As a result, many evil casts evaporated, and some weirdness,
7292 too. You may find this causes warnings in your code. Zapping your evil
7293 casts will probably fix them. Mostly.
7296 *) Fix for a typo in asn1.h. Bug fix to object creation script
7297 obj_dat.pl. It considered a zero in an object definition to mean
7298 "end of object": none of the objects in objects.h have any zeros
7299 so it wasn't spotted.
7300 [Steve Henson, reported by Erwann ABALEA <eabalea@certplus.com>]
7302 *) Add support for Triple DES Cipher Block Chaining with Output Feedback
7303 Masking (CBCM). In the absence of test vectors, the best I have been able
7304 to do is check that the decrypt undoes the encrypt, so far. Send me test
7305 vectors if you have them.
7308 *) Correct calculation of key length for export ciphers (too much space was
7309 allocated for null ciphers). This has not been tested!
7312 *) Modifications to the mkdef.pl for Win32 DEF file creation. The usage
7313 message is now correct (it understands "crypto" and "ssl" on its
7314 command line). There is also now an "update" option. This will update
7315 the util/ssleay.num and util/libeay.num files with any new functions.
7317 perl util/mkdef.pl crypto ssl update
7318 it will update them.
7321 *) Overhauled the Perl interface (perl/*):
7322 - ported BN stuff to OpenSSL's different BN library
7323 - made the perl/ source tree CVS-aware
7324 - renamed the package from SSLeay to OpenSSL (the files still contain
7325 their history because I've copied them in the repository)
7326 - removed obsolete files (the test scripts will be replaced
7327 by better Test::Harness variants in the future)
7328 [Ralf S. Engelschall]
7330 *) First cut for a very conservative source tree cleanup:
7331 1. merge various obsolete readme texts into doc/ssleay.txt
7332 where we collect the old documents and readme texts.
7333 2. remove the first part of files where I'm already sure that we no
7334 longer need them because of three reasons: either they are just temporary
7335 files which were left by Eric or they are preserved original files where
7336 I've verified that the diff is also available in the CVS via "cvs diff
7337 -rSSLeay_0_8_1b" or they were renamed (as it was definitely the case for
7338 the crypto/md/ stuff).
7339 [Ralf S. Engelschall]
7341 *) More extension code. Incomplete support for subject and issuer alt
7342 name, issuer and authority key id. Change the i2v function parameters
7343 and add an extra 'crl' parameter in the X509V3_CTX structure: guess
7344 what that's for :-) Fix to ASN1 macro which messed up
7345 IMPLICIT tag and add f_enum.c which adds a2i, i2a for ENUMERATED.
7348 *) Preliminary support for ENUMERATED type. This is largely copied from the
7352 *) Add new function, EVP_MD_CTX_copy() to replace frequent use of memcpy.
7353 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7355 *) Make sure `make rehash' target really finds the `openssl' program.
7356 [Ralf S. Engelschall, Matthias Loepfe <Matthias.Loepfe@adnovum.ch>]
7358 *) Squeeze another 7% of speed out of MD5 assembler, at least on a P2. I'd
7359 like to hear about it if this slows down other processors.
7362 *) Add CygWin32 platform information to Configure script.
7363 [Alan Batie <batie@aahz.jf.intel.com>]
7365 *) Fixed ms/32all.bat script: `no_asm' -> `no-asm'
7366 [Rainer W. Gerling <gerling@mpg-gv.mpg.de>]
7368 *) New program nseq to manipulate netscape certificate sequences
7371 *) Modify crl2pkcs7 so it supports multiple -certfile arguments. Fix a
7375 *) Fixes to BN code. Previously the default was to define BN_RECURSION
7376 but the BN code had some problems that would cause failures when
7377 doing certificate verification and some other functions.
7378 [Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
7380 *) Add ASN1 and PEM code to support netscape certificate sequences.
7383 *) Add ASN1 and PEM code to support netscape certificate sequences.
7386 *) Add several PKIX and private extended key usage OIDs.
7389 *) Modify the 'ca' program to handle the new extension code. Modify
7390 openssl.cnf for new extension format, add comments.
7393 *) More X509 V3 changes. Fix typo in v3_bitstr.c. Add support to 'req'
7394 and add a sample to openssl.cnf so req -x509 now adds appropriate
7398 *) Continued X509 V3 changes. Add to other makefiles, integrate with the
7399 error code, add initial support to X509_print() and x509 application.
7402 *) Takes a deep breath and start addding X509 V3 extension support code. Add
7403 files in crypto/x509v3. Move original stuff to crypto/x509v3/old. All this
7404 stuff is currently isolated and isn't even compiled yet.
7407 *) Continuing patches for GeneralizedTime. Fix up certificate and CRL
7408 ASN1 to use ASN1_TIME and modify print routines to use ASN1_TIME_print.
7409 Removed the versions check from X509 routines when loading extensions:
7410 this allows certain broken certificates that don't set the version
7411 properly to be processed.
7414 *) Deal with irritating shit to do with dependencies, in YAAHW (Yet Another
7415 Ad Hoc Way) - Makefile.ssls now all contain local dependencies, which
7416 can still be regenerated with "make depend".
7419 *) Spelling mistake in C version of CAST-128.
7420 [Ben Laurie, reported by Jeremy Hylton <jeremy@cnri.reston.va.us>]
7422 *) Changes to the error generation code. The perl script err-code.pl
7423 now reads in the old error codes and retains the old numbers, only
7424 adding new ones if necessary. It also only changes the .err files if new
7425 codes are added. The makefiles have been modified to only insert errors
7426 when needed (to avoid needlessly modifying header files). This is done
7427 by only inserting errors if the .err file is newer than the auto generated
7428 C file. To rebuild all the error codes from scratch (the old behaviour)
7429 either modify crypto/Makefile.ssl to pass the -regen flag to err_code.pl
7430 or delete all the .err files.
7433 *) CAST-128 was incorrectly implemented for short keys. The C version has
7434 been fixed, but is untested. The assembler versions are also fixed, but
7435 new assembler HAS NOT BEEN GENERATED FOR WIN32 - the Makefile needs fixing
7436 to regenerate it if needed.
7437 [Ben Laurie, reported (with fix for C version) by Jun-ichiro itojun
7438 Hagino <itojun@kame.net>]
7440 *) File was opened incorrectly in randfile.c.
7441 [Ulf Möller <ulf@fitug.de>]
7443 *) Beginning of support for GeneralizedTime. d2i, i2d, check and print
7444 functions. Also ASN1_TIME suite which is a CHOICE of UTCTime or
7445 GeneralizedTime. ASN1_TIME is the proper type used in certificates et
7446 al: it's just almost always a UTCTime. Note this patch adds new error
7447 codes so do a "make errors" if there are problems.
7450 *) Correct Linux 1 recognition in config.
7451 [Ulf Möller <ulf@fitug.de>]
7453 *) Remove pointless MD5 hash when using DSA keys in ca.
7454 [Anonymous <nobody@replay.com>]
7456 *) Generate an error if given an empty string as a cert directory. Also
7457 generate an error if handed NULL (previously returned 0 to indicate an
7458 error, but didn't set one).
7459 [Ben Laurie, reported by Anonymous <nobody@replay.com>]
7461 *) Add prototypes to SSL methods. Make SSL_write's buffer const, at last.
7464 *) Fix the dummy function BN_ref_mod_exp() in rsaref.c to have the correct
7465 parameters. This was causing a warning which killed off the Win32 compile.
7468 *) Remove C++ style comments from crypto/bn/bn_local.h.
7469 [Neil Costigan <neil.costigan@celocom.com>]
7471 *) The function OBJ_txt2nid was broken. It was supposed to return a nid
7472 based on a text string, looking up short and long names and finally
7473 "dot" format. The "dot" format stuff didn't work. Added new function
7474 OBJ_txt2obj to do the same but return an ASN1_OBJECT and rewrote
7475 OBJ_txt2nid to use it. OBJ_txt2obj can also return objects even if the
7476 OID is not part of the table.
7479 *) Add prototypes to X509 lookup/verify methods, fixing a bug in
7480 X509_LOOKUP_by_alias().
7483 *) Sort openssl functions by name.
7486 *) Get the gendsa program working (hopefully) and add it to app list. Remove
7487 encryption from sample DSA keys (in case anyone is interested the password
7491 *) Make _all_ *_free functions accept a NULL pointer.
7492 [Frans Heymans <fheymans@isaserver.be>]
7494 *) If a DH key is generated in s3_srvr.c, don't blow it by trying to use
7496 [Anonymous <nobody@replay.com>]
7498 *) s_server should send the CAfile as acceptable CAs, not its own cert.
7499 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7501 *) Don't blow it for numeric -newkey arguments to apps/req.
7502 [Bodo Moeller <3moeller@informatik.uni-hamburg.de>]
7504 *) Temp key "for export" tests were wrong in s3_srvr.c.
7505 [Anonymous <nobody@replay.com>]
7507 *) Add prototype for temp key callback functions
7508 SSL_CTX_set_tmp_{rsa,dh}_callback().
7511 *) Make DH_free() tolerate being passed a NULL pointer (like RSA_free() and
7512 DSA_free()). Make X509_PUBKEY_set() check for errors in d2i_PublicKey().
7515 *) X509_name_add_entry() freed the wrong thing after an error.
7516 [Arne Ansper <arne@ats.cyber.ee>]
7518 *) rsa_eay.c would attempt to free a NULL context.
7519 [Arne Ansper <arne@ats.cyber.ee>]
7521 *) BIO_s_socket() had a broken should_retry() on Windoze.
7522 [Arne Ansper <arne@ats.cyber.ee>]
7524 *) BIO_f_buffer() didn't pass on BIO_CTRL_FLUSH.
7525 [Arne Ansper <arne@ats.cyber.ee>]
7527 *) Make sure the already existing X509_STORE->depth variable is initialized
7528 in X509_STORE_new(), but document the fact that this variable is still
7529 unused in the certificate verification process.
7530 [Ralf S. Engelschall]
7532 *) Fix the various library and apps files to free up pkeys obtained from
7533 X509_PUBKEY_get() et al. Also allow x509.c to handle netscape extensions.
7536 *) Fix reference counting in X509_PUBKEY_get(). This makes
7537 demos/maurice/example2.c work, amongst others, probably.
7538 [Steve Henson and Ben Laurie]
7540 *) First cut of a cleanup for apps/. First the `ssleay' program is now named
7541 `openssl' and second, the shortcut symlinks for the `openssl <command>'
7542 are no longer created. This way we have a single and consistent command
7543 line interface `openssl <command>', similar to `cvs <command>'.
7544 [Ralf S. Engelschall, Paul Sutton and Ben Laurie]
7546 *) ca.c: move test for DSA keys inside #ifndef NO_DSA. Make pubkey
7547 BIT STRING wrapper always have zero unused bits.
7550 *) Add CA.pl, perl version of CA.sh, add extended key usage OID.
7553 *) Make the top-level INSTALL documentation easier to understand.
7556 *) Makefiles updated to exit if an error occurs in a sub-directory
7557 make (including if user presses ^C) [Paul Sutton]
7559 *) Make Montgomery context stuff explicit in RSA data structure.
7562 *) Fix build order of pem and err to allow for generated pem.h.
7565 *) Fix renumbering bug in X509_NAME_delete_entry().
7568 *) Enhanced the err-ins.pl script so it makes the error library number
7569 global and can add a library name. This is needed for external ASN1 and
7570 other error libraries.
7573 *) Fixed sk_insert which never worked properly.
7576 *) Fix ASN1 macros so they can handle indefinite length construted
7577 EXPLICIT tags. Some non standard certificates use these: they can now
7581 *) Merged the various old/obsolete SSLeay documentation files (doc/xxx.doc)
7582 into a single doc/ssleay.txt bundle. This way the information is still
7583 preserved but no longer messes up this directory. Now it's new room for
7584 the new set of documenation files.
7585 [Ralf S. Engelschall]
7587 *) SETs were incorrectly DER encoded. This was a major pain, because they
7588 shared code with SEQUENCEs, which aren't coded the same. This means that
7589 almost everything to do with SETs or SEQUENCEs has either changed name or
7590 number of arguments.
7591 [Ben Laurie, based on a partial fix by GP Jayan <gp@nsj.co.jp>]
7593 *) Fix test data to work with the above.
7596 *) Fix the RSA header declarations that hid a bug I fixed in 0.9.0b but
7597 was already fixed by Eric for 0.9.1 it seems.
7598 [Ben Laurie - pointed out by Ulf Möller <ulf@fitug.de>]
7600 *) Autodetect FreeBSD3.
7603 *) Fix various bugs in Configure. This affects the following platforms:
7607 unixware-2.0-pentium
7611 *) Eliminate generated files from CVS. Reorder tests to regenerate files
7612 before they are needed.
7615 *) Generate Makefile.ssl from Makefile.org (to keep CVS happy).
7619 Changes between 0.9.1b and 0.9.1c [23-Dec-1998]
7621 *) Added OPENSSL_VERSION_NUMBER to crypto/crypto.h and
7622 changed SSLeay to OpenSSL in version strings.
7623 [Ralf S. Engelschall]
7625 *) Some fixups to the top-level documents.
7628 *) Fixed the nasty bug where rsaref.h was not found under compile-time
7629 because the symlink to include/ was missing.
7630 [Ralf S. Engelschall]
7632 *) Incorporated the popular no-RSA/DSA-only patches
7633 which allow to compile a RSA-free SSLeay.
7634 [Andrew Cooke / Interrader Ldt., Ralf S. Engelschall]
7636 *) Fixed nasty rehash problem under `make -f Makefile.ssl links'
7637 when "ssleay" is still not found.
7638 [Ralf S. Engelschall]
7640 *) Added more platforms to Configure: Cray T3E, HPUX 11,
7641 [Ralf S. Engelschall, Beckmann <beckman@acl.lanl.gov>]
7643 *) Updated the README file.
7644 [Ralf S. Engelschall]
7646 *) Added various .cvsignore files in the CVS repository subdirs
7647 to make a "cvs update" really silent.
7648 [Ralf S. Engelschall]
7650 *) Recompiled the error-definition header files and added
7651 missing symbols to the Win32 linker tables.
7652 [Ralf S. Engelschall]
7654 *) Cleaned up the top-level documents;
7655 o new files: CHANGES and LICENSE
7656 o merged VERSION, HISTORY* and README* files a CHANGES.SSLeay
7657 o merged COPYRIGHT into LICENSE
7658 o removed obsolete TODO file
7659 o renamed MICROSOFT to INSTALL.W32
7660 [Ralf S. Engelschall]
7662 *) Removed dummy files from the 0.9.1b source tree:
7663 crypto/asn1/x crypto/bio/cd crypto/bio/fg crypto/bio/grep crypto/bio/vi
7664 crypto/bn/asm/......add.c crypto/bn/asm/a.out crypto/dsa/f crypto/md5/f
7665 crypto/pem/gmon.out crypto/perlasm/f crypto/pkcs7/build crypto/rsa/f
7666 crypto/sha/asm/f crypto/threads/f ms/zzz ssl/f ssl/f.mak test/f
7667 util/f.mak util/pl/f util/pl/f.mak crypto/bf/bf_locl.old apps/f
7668 [Ralf S. Engelschall]
7670 *) Added various platform portability fixes.
7673 *) The Genesis of the OpenSSL rpject:
7674 We start with the latest (unreleased) SSLeay version 0.9.1b which Eric A.
7675 Young and Tim J. Hudson created while they were working for C2Net until
7677 [The OpenSSL Project]
7680 Changes between 0.9.0b and 0.9.1b [not released]
7682 *) Updated a few CA certificates under certs/
7685 *) Changed some BIGNUM api stuff.
7688 *) Various platform ports: OpenBSD, Ultrix, IRIX 64bit, NetBSD,
7689 DGUX x86, Linux Alpha, etc.
7692 *) New COMP library [crypto/comp/] for SSL Record Layer Compression:
7693 RLE (dummy implemented) and ZLIB (really implemented when ZLIB is
7697 *) Add -strparse option to asn1pars program which parses nested
7699 [Dr Stephen Henson <shenson@bigfoot.com>]
7701 *) Added "oid_file" to ssleay.cnf for "ca" and "req" programs.
7704 *) DSA fix for "ca" program.
7707 *) Added "-genkey" option to "dsaparam" program.
7710 *) Added RIPE MD160 (rmd160) message digest.
7713 *) Added -a (all) option to "ssleay version" command.
7716 *) Added PLATFORM define which is the id given to Configure.
7719 *) Added MemCheck_XXXX functions to crypto/mem.c for memory checking.
7722 *) Extended the ASN.1 parser routines.
7725 *) Extended BIO routines to support REUSEADDR, seek, tell, etc.
7728 *) Added a BN_CTX to the BN library.
7731 *) Fixed the weak key values in DES library
7734 *) Changed API in EVP library for cipher aliases.
7737 *) Added support for RC2/64bit cipher.
7740 *) Converted the lhash library to the crypto/mem.c functions.
7743 *) Added more recognized ASN.1 object ids.
7746 *) Added more RSA padding checks for SSL/TLS.
7749 *) Added BIO proxy/filter functionality.
7752 *) Added extra_certs to SSL_CTX which can be used
7753 send extra CA certificates to the client in the CA cert chain sending
7754 process. It can be configured with SSL_CTX_add_extra_chain_cert().
7757 *) Now Fortezza is denied in the authentication phase because
7758 this is key exchange mechanism is not supported by SSLeay at all.
7761 *) Additional PKCS1 checks.
7764 *) Support the string "TLSv1" for all TLS v1 ciphers.
7767 *) Added function SSL_get_ex_data_X509_STORE_CTX_idx() which gives the
7768 ex_data index of the SSL context in the X509_STORE_CTX ex_data.
7771 *) Fixed a few memory leaks.
7774 *) Fixed various code and comment typos.
7777 *) A minor bug in ssl/s3_clnt.c where there would always be 4 0
7778 bytes sent in the client random.
7779 [Edward Bishop <ebishop@spyglass.com>]
projects / oweals / openssl.git / blob