1 commit f9204e15173834ff8d123e36279ce49c3c6c74fc
2 Author: Magnus Lilja <lilja.magnus@gmail.com>
3 Date: Sun Apr 20 10:38:12 2008 +0200
5 i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
7 This patch enables SPI and MC13783/RTC support for the Litekit board.
9 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
11 commit f97abbfb47d9e407354e157cae3f6369e460cd37
12 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
13 Date: Fri Apr 25 01:08:32 2008 -0500
15 MPC8544DS: decode pcie3 end-point configuration correctly.
17 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20 commit 292188e15523c165c4269403fdcd33c26d89176e
21 Author: Roy Zang <tie-fei.zang@freescale.com>
22 Date: Fri Apr 25 00:55:09 2008 -0500
24 MPC8544DS: Removes the unknown flash message information
26 This patch removes the unknown flash message information:
27 '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
28 This unknown flash message is caused by PromJet.
29 Some of the board user is unhappy with this information.
31 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34 commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
35 Author: Kim Phillips <kim.phillips@freescale.com>
36 Date: Thu Apr 24 14:07:38 2008 -0500
38 mpc83xx: bump loadaddr over fdtaddr to 0x500000
40 this seems as a good compromise between human memory, typing,
41 and last but not least, to accommodate for current and future kernel bloat.
43 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
44 Acked-by: Dave Liu <daveliu@freescale.com>
46 commit be5a7190265a34d968578ff266549c60f6f57654
47 Author: Dave Liu <r63238@freescale.com>
48 Date: Tue Apr 15 13:12:23 2008 +0800
50 mpc83xx: clean up the readme for 83xx boards
53 2. correct the memory map for 837xerdb board
55 Signed-off-by: Dave Liu <daveliu@freescale.com>
57 commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
58 Author: Dave Liu <r63238@freescale.com>
59 Date: Tue Apr 15 13:11:11 2008 +0800
61 mpc83xx: remove the unused CPM's stuff
63 The MPC83xx family never have CPM block, so remove it from 83xx.
65 Signed-off-by: Dave Liu <daveliu@freescale.com>
67 commit c63ad6325a8ac0097a54b418a3288926b0484b18
68 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
69 Date: Fri Apr 18 16:29:40 2008 +0200
71 cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
73 This patch adds a configurable flash auto protection list that can be used
74 to make U-Boot protect flash regions in flash_init().
76 The idea has been discussed on the u-boot mailing list starting
79 Even this patch brings a new feature it is used as a bugfix for 4xx
80 platforms where flash_init() does not completely protect the
81 monitor's flash range in all situations.
83 U-Boot protects the flash range from CFG_MONITOR_BASE to
84 (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
85 include the reset vector at 0xfffffffc.
88 #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
90 This config option will auto protect the last 512k of flash that
91 contains the bootloader on board like APC405 and PMC405.
93 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
95 commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
96 Author: Stefan Roese <sr@denx.de>
97 Date: Fri Apr 25 13:59:03 2008 +0200
99 ppc4xx: Remove double defines in lwmon5.h
101 introduced with latest lwmon5/POST merge
103 Signed-off-by: Stefan Roese <sr@denx.de>
105 commit 7590378fb9c686709492ceb142825cd058255956
106 Author: Bartlomiej Sieka <tur@semihalf.com>
107 Date: Fri Apr 25 13:54:02 2008 +0200
109 Use watchdog-aware functions when calculating hashes of images - take two
111 Some files didn't get updated properly with the "Use watchdog-aware
112 functions when calculating hashes of images" commit, this commit
115 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
116 Signed-off-by: Wolfgang Denk <wd@denx.de>
118 commit 8e048c438e20ec89b49da5f085f8f756eba6e587
119 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
120 Date: Fri Apr 25 12:01:39 2008 +0200
122 ppc4xx: Add bootcount limit handling for APC405 boards
124 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
126 commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
127 Author: Bartlomiej Sieka <tur@semihalf.com>
128 Date: Fri Apr 25 12:10:09 2008 +0200
130 Use watchdog-aware functions when calculating hashes of images
132 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
134 commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
135 Author: Wolfgang Denk <wd@denx.de>
136 Date: Fri Apr 25 12:44:08 2008 +0200
138 USB: fix more GCC 4.2.x aliasing warnings
140 Signed-off-by: Wolfgang Denk <wd@denx.de>
141 Acked-by: Markus Klotzbuecher <mk@denx.de>
143 commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
144 Author: Wolfgang Denk <wd@denx.de>
145 Date: Fri Apr 25 12:41:53 2008 +0200
147 lib_generic/crc32.c: add missing #include <watchdog.h>
149 Signed-off-by: Wolfgang Denk <wd@denx.de>
151 commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
152 Author: Wolfgang Denk <wd@denx.de>
153 Date: Fri Apr 25 11:52:21 2008 +0200
155 lib_generic/crc32.c: fix compile problem
157 Signed-off-by: Wolfgang Denk <wd@denx.de>
159 commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
160 Author: Stefan Roese <sr@denx.de>
161 Date: Tue Apr 22 12:20:32 2008 +0200
163 ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
165 The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
166 environment variable will now get passed to the Linux kernel by setting
167 the device_type property of the PCIe device tree node. For normal root-
168 complex configuration it will keep its defaults value of "pci" and for
169 endpoint configuration it will get changed to "pci-endpoint".
171 Signed-off-by: Stefan Roese <sr@denx.de>
173 commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
174 Author: Yuri Tikhonov <yur@emcraft.com>
175 Date: Thu Apr 24 10:30:53 2008 +0200
177 lwmon5: watchdog POST fix
179 Use the GPT0_MASKx registers as the temporary storage for watch-dog
180 timer POST test instead of GPT0_COMPx. The latter
181 (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
183 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
184 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
186 commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
187 Author: Kim Phillips <kim.phillips@freescale.com>
188 Date: Mon Apr 21 18:10:14 2008 -0500
190 lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
192 This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
193 proven problematic getting right from the start at least on 83xx and
196 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
198 commit a99715b8ebfc500f3f40e01b36b64d473938443d
199 Author: Detlev Zundel <dzu@denx.de>
200 Date: Fri Apr 18 14:50:01 2008 +0200
202 Realining some header definitions.
204 Signed-off-by: Detlev Zundel <dzu@denx.de>
206 commit 4acbc6c7f993cae409c424615415a3e76820f13d
207 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
208 Date: Thu Apr 24 07:57:16 2008 +0200
210 NE2000: coding style cleanup
212 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
214 commit b4aff1ffaf7120032c653357c007faa14f74d29d
215 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
216 Date: Wed Apr 23 00:11:47 2008 +0900
218 qemu-mips.h: Add CFI support
220 CONFIG_ENV_OVERWRITE is also added.
222 This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
224 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
225 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
227 commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
228 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
229 Date: Tue Apr 22 22:47:27 2008 +0900
231 doc/README.mips: Add MIPS notes
233 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
235 commit 215b01bba8bc662d35f72b084700b192d367dfb4
236 Author: Bartlomiej Sieka <tur@semihalf.com>
237 Date: Tue Apr 22 12:27:56 2008 +0200
239 Add support for calculating hashes with watchdog triggering
241 Implement watchodg-aware variants of hash calculation functions:
245 The above functions calculate the hash of the input buffer in chunks,
246 triggering the watchdog after processing each chunk. The chunk size
247 is given as a function call parameter.
249 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
251 commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
252 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
253 Date: Wed Apr 23 11:02:12 2008 +0900
255 qemu-mips: Cleanup whitespace, indentation, etc.
257 No functional change.
259 This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
260 Then I re-created from scratch, and changed more lines than the original.
262 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
263 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
265 commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
266 Author: Vlad Lungu <vlad@comsys.ro>
267 Date: Wed Oct 10 23:02:09 2007 +0300
271 Bus and phys address are not always the same
273 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
275 commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
276 Author: Wolfgang Denk <wd@denx.de>
277 Date: Thu Apr 24 23:44:26 2008 +0200
279 drivers/net/pcnet.c: Coding Style cleanup.
281 Signed-off-by: Wolfgang Denk <wd@denx.de>
283 commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
284 Author: Vlad Lungu <vlad@comsys.ro>
285 Date: Wed Oct 10 23:04:23 2007 +0300
287 Added Am79C970A chip id to pcnet
289 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
291 commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
292 Author: Magnus Lilja <lilja.magnus@gmail.com>
293 Date: Sun Apr 20 10:35:03 2008 +0200
295 i.MX31: Fix architecture numbers for ADS and Litekit boards
297 Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
299 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
301 commit e7ae84d6c7288790e88639f57cb60daf89c11369
302 Author: Magnus Lilja <lilja.magnus@gmail.com>
303 Date: Sun Apr 20 10:36:36 2008 +0200
305 i.MX31: Use symbolic names for Litekit membases.
307 Use symbolic names instead of hard coded addresses for Litekit membases.
309 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
311 commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
312 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
313 Date: Sat Apr 19 17:59:20 2008 +0200
315 Fix show_boot_progress prototype
317 in commit fad634071 "make show_boot_progress () weak."
318 show_boot_progress is supposed to be declared as weak but declared as
321 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
323 commit edbed247a14d70b94958010f736621212285de91
324 Author: Bartlomiej Sieka <tur@semihalf.com>
325 Date: Fri Apr 18 12:39:23 2008 +0200
327 Memory footprint optimizations
329 As suggested by Wolfgang Denk:
330 - image printing functions:
332 - remove indentation prefix from functions' signatures
333 - merge getenv_verify and getenv_autostart into one parametrized function
335 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
337 commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
338 Author: Guennadi Liakhovetski <lg@denx.de>
339 Date: Tue Apr 15 13:33:11 2008 +0200
341 MX31ADS environment variable update, spi and rtc support
343 Update MX31ADS default environment to better match the flash layout and
344 the memory map, support SPI and RTC.
346 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
348 commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
349 Author: Kumar Gala <galak@kernel.crashing.org>
350 Date: Mon Apr 21 09:28:36 2008 -0500
352 85xx: Round up frequency calculations to get reasonable output
354 eg. because of rounding error we can get 799Mhz instead of 800Mhz.
356 Introduced DIV_ROUND_UP and roundup taken from linux kernel.
358 Signed-off-by: Dejan Minic <minic@freescale.com>
359 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
360 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
361 Acked-by: Andy Fleming <afleming@freescale.com>
363 commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
364 Author: Kumar Gala <galak@kernel.crashing.org>
365 Date: Wed Apr 23 16:58:04 2008 -0500
367 fsl_pci: Only modify registers if we have them
369 pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
371 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
373 commit 83fe32334337def160b302aa9d152d808bfcc68e
374 Author: Markus Klotzbücher <mk@denx.de>
375 Date: Wed Apr 23 10:57:33 2008 +0200
377 USB: remove a cpu bug workaround for an unsupported architecture.
379 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
381 commit f957576cb53e6cfab412709cfc8db1afd39d21c3
382 Author: Markus Klotzbücher <mk@denx.de>
383 Date: Wed Apr 23 10:53:23 2008 +0200
385 USB: fix those pesky aliasing warnings issued by gcc-4.2
387 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
388 Signed-off-by: Detlev Zundel <dzu@denx.de>
390 commit 89cdab788f3716b335fefb60b836ebcf975aceab
391 Author: Mike Frysinger <vapier@gentoo.org>
392 Date: Mon Mar 31 11:02:01 2008 -0400
394 crc32: use uint32_t rather than unsigned long
396 The envcrc.c does sizeof(unsigned long) when calculating the crc, but
397 this is done with the build toolchain instead of the target tool
398 chain, so if the build is a 64bit system but the target is 32bits,
399 the size will obviously be wrong. This converts all unsigned long
400 stuff related to crc32 to uint32_t types. Compile tested only: output
401 of ./tools/envcrc when run on a 32bit build system matches that of a
404 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
405 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
407 commit 80c40b765b3642ddb9f3392b7898715aab44a29c
408 Author: Dirk Behme <dirk.behme@googlemail.com>
409 Date: Wed Mar 26 09:53:29 2008 +0100
411 ARM: Davinci: Fix DM644x timer overflow handling and cleanup
413 Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
417 - Remove *_masked() functions as noted by Wolfgang
419 - Adapt register naming to recent TI spec (sprue26, March 2007)
421 - Fix reset_timer() handling
423 - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
425 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
427 - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
429 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
431 Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
433 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
434 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
436 commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
437 Author: Sergei Poselenov <sposelenov@emcraft.com>
438 Date: Wed Apr 9 16:09:41 2008 +0200
440 Added watchdog triggering calls in the "mtest" test function.
442 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
444 commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
445 Author: Yuri Tikhonov <yur@emcraft.com>
446 Date: Sun Apr 6 19:19:14 2008 +0200
448 lwmon5 watchdog: limit trigger rate
450 Limit the rate of h/w watch-dog triggering on the LWMON5 board by
451 the CONFIG_WD_MAX_RATE value.
453 Note that an earlier version of this patch which used microseconds
454 instead of ticks dis not work. The problem was that we used
455 usec2ticks() to convert microseconds into ticks. usec2ticks() uses
456 get_tbclk(), which in turn calls get_sys_info(). It turns out that
457 this function does a lot of prolonged operations (like divisions)
458 which take too much time so we do not trigger the watchdog in time,
459 and it resets the system.
461 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
463 commit 2d2b994a30bb100774dc747ae9865b7f95285a88
464 Author: Yuri Tikhonov <yur@emcraft.com>
465 Date: Mon Mar 31 10:51:37 2008 +0200
467 POST: move CONFIG_POST to Makefiles
469 Introduce the new logical option CONFIG_HAS_POST which is set when the
470 platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
471 to determine should the POST libs be compiled for the selected target
474 To avoid breaking u-boot linking process, the empty post/libpost.a file is
475 created for platforms which do not have POSTs.
477 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
478 Signed-off-by: Wolfgang Denk <wd@denx.de>
480 commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
481 Author: Yuri Tikhonov <yur@emcraft.com>
482 Date: Mon Mar 31 10:49:34 2008 +0200
484 POST: preparations for moving CONFIG_POST to Makefiles
486 Remove CONFIG_POST ifdefs from the post/ source files.
488 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
489 Signed-off-by: Wolfgang Denk <wd@denx.de>
491 commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
492 Author: Stefan Roese <sr@denx.de>
493 Date: Tue Apr 22 14:14:20 2008 +0200
495 ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
497 This patch fixes the Canyonlands and Glacier default environment to better
498 fit to the arch/powerpc device-tree kernels. The variables dealing with
499 arch/ppc booting are removed, since these boards are supported only in
500 arch/powerpc. Glacier uses the same config file as Canyonlands.
502 Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
504 Signed-off-by: Stefan Roese <sr@denx.de>
506 commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
507 Author: Stefan Roese <sr@denx.de>
508 Date: Tue Apr 22 14:06:42 2008 +0200
510 ppc4xx: Small coding style cleanup for the latest esd patches
512 Signed-off-by: Stefan Roese <sr@denx.de>
514 commit 79941d63bc03aed8c48d7602f18217cc200ee931
515 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
516 Date: Mon Apr 21 18:01:07 2008 +0200
518 ppc4xx: Update CPU strapping for PMC440 boards
520 This patch removes the temporary 'test' strapping option
521 of the sbe command. The '667' strapping option now uses
522 a PLB/PCI divider of 3.
524 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
526 commit f00cf3193a6635355b121e90debb2f54e777e7da
527 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
528 Date: Mon Apr 21 14:42:21 2008 +0200
530 ppc4xx: Remove unused APC405 strataflash driver
532 The APC405 board support has been migrated to use the common
535 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
537 commit 1c686676a86473bbd92151f0544e109413f6ed06
538 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
539 Date: Mon Apr 21 14:42:17 2008 +0200
541 ppc4xx: Update APC405 configuration
543 - enable esd's auto_update mechanism
544 - support alternative flash layout on rev. 1.8 boards
545 - update default environment
546 - use common CFI flash driver
547 - coding style cleanup
549 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
551 commit 0b9872515a521bf7866dc24b85ddce708e60d702
552 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
553 Date: Mon Apr 21 14:42:11 2008 +0200
555 ppc4xx: Update APC405 board support
557 - enable esd's auto_update mechanism
558 - fix LCD support on latest hardware revision (uses other LCD controller)
559 - support alternative flash layout on rev. 1.8 boards
560 - coding style cleanup
562 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
564 commit 83975d02e225e231960784972e7820a8b303756b
565 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
566 Date: Mon Apr 21 14:42:06 2008 +0200
568 ppc4xx: update esd's common auto_update code for 405 boards
570 - Coding style cleanup (long lines)
571 - improve handling of protected flash regions
574 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
576 commit b9233fe5d59cb25d975071616bd1035d6f4c2285
577 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
578 Date: Mon Apr 21 14:41:59 2008 +0200
580 ppc4xx: Update esd's common LCD code for 405 boards
582 - Coding style cleanup (long lines)
583 - Add s1d13505 support
584 - Make some functions return a result code instead of void
586 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
588 commit dea68189424c3f1242427a8146a3861bf093173c
589 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
590 Date: Mon Apr 21 11:36:55 2008 +0200
592 ppc4xx: Update FPGA image for APC405 boards
594 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
596 commit 2a05b152924acfcec3b037693329e517e6d3578f
597 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
598 Date: Mon Apr 21 11:36:08 2008 +0200
600 ppc4xx: Update bootlogo for APC405 boards
602 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
604 commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
605 Author: Stefan Roese <sr@denx.de>
606 Date: Fri Apr 18 16:41:31 2008 +0200
608 ppc4xx: Add dcache_enable() for 440
610 dcache_enable() was missing for 440 and the patch
611 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
612 "] behavior uses this function.
614 Note: Currently the cache handling functions like
615 d/icache_disable/enable() are NOP's on 440. This may be changed in the
618 Signed-off-by: Stefan Roese <sr@denx.de>
620 commit a49e0d177a0749614b316ec847fb623f09c82c07
621 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
622 Date: Mon Apr 21 11:19:04 2008 +0200
624 video: Add missing free for logo memory
626 This patch adds two missing free()s.
628 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
630 commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
631 Author: Troy Kisky <troy.kisky@boundarydevices.com>
632 Date: Mon Sep 24 16:41:43 2007 -0700
634 PATCH - Fix oob data copied into supplied buffer
636 This patch correctly sets the oobavail variable
637 and fixes a bug where the oob data was not valid when
638 there where multiple groups in oobfree.
640 First segment fixes a typo
641 Second segment fixes a bug where oob data may be copied incorrectly.
642 Third segment adds an error message when exiting due to write protect.
643 Forth segment fixes a bug where oobavail may be set incorrectly.
645 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
647 commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
648 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
649 Date: Fri Apr 18 17:24:32 2008 +0200
651 ppc4xx: Fix sys_get_info() for 405GP(r)
653 This patch assigns the correct EBC clock for 405GP(r) CPUs
654 to PPC4xx_SYS_INFO structure. Without this patch U-Boot
655 uses an uninitialized EBC clock in its startup message.
657 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
659 commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
660 Author: Wolfgang Denk <wd@denx.de>
661 Date: Sun Apr 20 15:39:38 2008 -0700
663 Makefile: remove nand_spl/System.map when cleaning up.
665 commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
666 Author: Wolfgang Denk <wd@denx.de>
667 Date: Sun Apr 20 15:35:52 2008 -0700
669 MAKEALL: sort entries / lists.
671 Signed-off-by: Wolfgang Denk <wd@denx.de>
673 commit 0878af169b181868a105b5c33f3a6423e2c9fd60
674 Author: Kumar Gala <galak@kernel.crashing.org>
675 Date: Fri Apr 18 11:29:01 2008 -0500
677 85xx: Fix size of cpu-release-addr property
679 The cpu-release-addr is defined as always being a 64-bit quanity regardless
680 if we are running on a 32-bit or 64-bit machine.
682 commit 88353a985109562a639b2f8a0c90d77011bfe374
683 Author: Timur Tabi <timur@freescale.com>
684 Date: Fri Apr 4 11:15:58 2008 -0500
686 Fix calculation of I2C clock for some 85xx chips
688 Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
689 some use CCB/3. There is no pattern that can be used to determine which
690 chips use which frequency, so the only way to determine is to look up the
691 actual SOC designation and use the right value for that SOC.
693 Update immap_85xx.h to include the GUTS PORDEVSR2 register.
695 Signed-off-by: Timur Tabi <timur@freescale.com>
697 commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
698 Author: Wolfgang Denk <wd@denx.de>
699 Date: Fri Apr 18 11:44:27 2008 -0700
701 Fix build breakage casued by commit c0559be371b2
703 Change env_get_char from a global function ptr to a function.
705 Signed-off-by: Wolfgang Denk <wd@denx.de>
707 commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
708 Author: Wolfgang Denk <wd@denx.de>
709 Date: Fri Apr 18 10:53:41 2008 -0700
711 Coding Style cleanup, update CHANGELOG.
713 Signed-off-by: Wolfgang Denk <wd@denx.de>
715 commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
716 Author: Mike Frysinger <vapier@gentoo.org>
717 Date: Tue Apr 8 14:00:57 2008 -0400
719 Add support for u-boot in svn and localversion-* files
721 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
723 commit d23ff6827decf121461fbc5622612fd7effe207e
724 Author: Guennadi Liakhovetski <lg@denx.de>
725 Date: Thu Apr 3 17:04:22 2008 +0200
727 MX31ADS network and flash updates
729 This patch allows U-Boot to use buffered writes to the Spansion NOR
730 flash installed on this board, and eliminates long delays in network
731 transfers after the board startup.
733 Also modify flash layout to embed main and redundant environment
734 blocks in the U-Boot image.
736 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
738 commit b5dc9b304d289831f291843ff88a45cbdf1a6290
739 Author: Guennadi Liakhovetski <lg@denx.de>
740 Date: Mon Apr 14 10:53:12 2008 +0200
742 Support for the MX31ADS evaluation board from Freescale
744 This patch adds support for the MX31ADS evaluation board from Freescale,
745 initialization code is copied from RedBoot sources, also provided by
748 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
750 commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
751 Author: Stefan Roese <sr@denx.de>
752 Date: Tue Apr 8 10:33:29 2008 +0200
754 ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
756 Signed-off-by: Stefan Roese <sr@denx.de>
758 commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
759 Author: Stefan Roese <sr@denx.de>
760 Date: Tue Apr 8 10:33:28 2008 +0200
762 ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
764 Signed-off-by: Stefan Roese <sr@denx.de>
766 commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
767 Author: Stefan Roese <sr@denx.de>
768 Date: Tue Apr 8 10:33:27 2008 +0200
770 ppc4xx: Add Glacier NAND booting target
772 Signed-off-by: Stefan Roese <sr@denx.de>
774 commit 46f373838e384a4c23d13581b1dfa5acb66b5810
775 Author: Stefan Roese <sr@denx.de>
776 Date: Tue Apr 8 10:31:00 2008 +0200
778 nand_spl: Update nand_spl to support 2k page size NAND devices
780 This patch adds support for booting from 2k page sized NAND device
781 (e.g. Micron 29F2G08AAC).
783 Tested on AMCC Canyonlands.
785 Signed-off-by: Stefan Roese <sr@denx.de>
787 commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
788 Author: Anatolij Gustschin <agust@denx.de>
789 Date: Thu Apr 17 18:18:00 2008 +0200
791 Fix crash on sequoia in ppc_4xx_eth_init
793 Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
794 with cache enabled (TLB Parity exeption). This patch
797 Signed-off-by: Anatolij Gustschin <agust@denx.de>
799 commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
800 Author: Anatolij Gustschin <agust@denx.de>
801 Date: Thu Apr 17 18:15:27 2008 +0200
803 ppc4xx: Fix crash on sequoia with cache enabled
805 Currently U-Boot crashes on sequoia board in CPU POST if
806 cache is enabled (CONFIG_4xx_DCACHE defined). The cache
807 won't be disabled by change_tlb before CPU POST because
808 there is an insufficient adress range check since
809 CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
812 Signed-off-by: Anatolij Gustschin <agust@denx.de>
814 commit 43c509254fab375c49936498da944658117ed07c
815 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
816 Date: Thu Apr 17 23:35:13 2008 +0900
818 Use jr as register jump instruction
820 Current assembler codes are inconsistent in the way of register jump
821 instruction usage; some use jr, some use j. Of course GNU as allows both
822 usages, but as can be expected from `Jump Register' the mnemonic `jr' is
823 more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
826 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
828 commit 7ce63709828d37b08866e537339a169bd0db2bd3
829 Author: Guennadi Liakhovetski <lg@denx.de>
830 Date: Tue Apr 15 14:15:30 2008 +0200
832 RTC driver for MC13783
834 MC13783 is a multifunction IS with an SPI interface to the host. This
835 driver handles the RTC controller in this chip.
837 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
839 commit 38254f45b0b412332726c90d3184ad47479fcffb
840 Author: Guennadi Liakhovetski <lg@denx.de>
841 Date: Tue Apr 15 14:14:25 2008 +0200
843 New i.MX31 SPI driver
845 This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
846 only implemented and tested on i.MX31, can with a modified register layout
847 and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
850 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
852 commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
853 Author: Magnus Lilja <lilja.magnus@gmail.com>
854 Date: Tue Apr 15 19:09:10 2008 +0200
856 Fix name of i.MX31 boards in config file header
858 Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
860 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
862 commit a49864593e083a5d0779fb9ca98e5a0f2053183d
863 Author: Mike Frysinger <vapier@gentoo.org>
864 Date: Sun Apr 13 19:42:19 2008 -0400
866 allow ports to override go behavior
868 Split the arch-specific logic out of the common go code and into a dedicated
869 weak function called do_go_exec() that lives in cpu directories. This will
870 need review from i386/nios people to make sure I didn't break them.
872 commit 017e9b7925f74878d0e9475388cca9bda5ef9482
873 Author: Mike Frysinger <vapier@gentoo.org>
874 Date: Sun Apr 13 19:42:18 2008 -0400
876 allow ports to override bootelf behavior
878 Change the bootelf setup function into a dedicated weak function called
879 do_bootelf_exec. This way ports can control the behavior however they
880 like before/after calling the ELF entry point.
882 commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
883 Author: Ulf Samuelsson <ulf@atmel.com>
884 Date: Sat Apr 12 20:56:03 2008 +0200
886 Reorder ARM boards in Makefile
888 Rearrange ARM boards in Makefile so that ARM926EJ-S boards
889 are no longer under ARM92xT header.
891 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
892 Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
894 commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
895 Author: Ulf Samuelsson <ulf@atmel.com>
896 Date: Sat Apr 12 20:29:44 2008 +0200
898 Clean up dataflash partitioning
900 This patch removes the board dependent parts from
901 "drivers/mtd/dataflash.c".
902 Each board relying on this, will have the appropriate
903 code in a new file, "partition.c" in the board directory.
904 board Makefiles updated to use the file.
906 The dataflash partitions are aligned on sector/page boundaries.
908 The CONFIG_NEW_DF_PARTITION was used to create named partitions
909 This is now the default operation, and the CONFIG variable is removed.
911 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
913 commit 51ecde946fec511a16346e498204ca10ad71080d
914 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
915 Date: Sat Apr 12 14:08:45 2008 +0200
917 gitignore: udpate stgit generated and .patch file
919 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
921 commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
922 Author: Wolfgang Denk <wd@denx.de>
923 Date: Fri Apr 18 00:15:36 2008 -0700
925 Get rid of redundant copy of renamed header file.
927 Signed-off-by: Wolfgang Denk <wd@denx.de>
929 commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
930 Author: Vlad Lungu <vlad@comsys.ro>
931 Date: Fri Apr 11 21:20:14 2008 +0300
933 Fix dependency generation for older gcc versions
935 With gcc 3.3.3 at least, compilation fails with
937 Generating include/autoconf.mk
938 gcc: compilation of header file requested
939 make: *** [include/autoconf.mk] Error 1
941 since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
943 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
945 commit cb1c4896905ab22fcd982e6a8a539f0031942e71
946 Author: Marian Balakowicz <m8@semihalf.com>
947 Date: Fri Apr 11 11:07:49 2008 +0200
949 Restore the ability to continue booting after legacy image overwrite
951 Before new uImage code was merged, bootm code allowed for the kernel image to
952 get overwritten during decompresion. new uImage introduced a check for image
953 overwrites and refused to boot the image that got overwritten. This patch
954 restores the old behavior. It also adds a warning when the image overwriten is
955 a multi-image file, because in such case accessing componentes other than the
958 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
960 commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
961 Author: Marian Balakowicz <m8@semihalf.com>
962 Date: Fri Apr 11 11:07:43 2008 +0200
964 ppc: Fix ftd_blob variable init when processing raw blob
966 Set fdt_blob variable before its value is printed out.
968 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
970 commit 3d36be030043cd841a2551d00a395135e363a64b
971 Author: Jason Wessel <jason.wessel@windriver.com>
972 Date: Thu Apr 10 14:30:16 2008 -0500
974 Remove all the search paths from the .lds files.
976 The cross compiler is responsible for providing the correct libraries
977 and the logic to find the linking libraries.
979 Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
981 commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
982 Author: Bartlomiej Sieka <tur@semihalf.com>
983 Date: Mon Apr 14 15:44:16 2008 +0200
985 Boot-related documentation update
987 - document 'bootm_low' and 'bootm_size' environment variables
988 - update inaccurate CFG_BOOTMAPSZ entry
990 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
992 commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
993 Author: Guennadi Liakhovetski <lg@denx.de>
994 Date: Wed Apr 9 17:34:08 2008 +0200
996 Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
998 Restore logic reverted by commit
1000 commit 80767a6cead9990d9e77e62be947843c2c72f469
1001 Author: Peter Pearse <peter.pearse@arm.com>
1002 Date: Wed Sep 5 16:04:41 2007 +0100
1004 Changed API name to coloured_led.h
1005 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
1006 Tidied other cpu/arm920t/start.S code
1008 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1010 commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
1011 Author: Mike Frysinger <vapier@gentoo.org>
1012 Date: Tue Apr 8 10:24:24 2008 -0400
1014 Remove conflicting NAND ID
1016 There are two NAND entries with ID 0xDC and this obviously causes problems.
1017 In the kernel, they punted the first entry, so we should do the same.
1019 See this upstream e-mail for more info:
1020 http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
1022 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
1023 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1025 commit 188e94c370621708d13547d58dbc6ed3c5602aa8
1026 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1027 Date: Tue Apr 8 16:20:35 2008 +0900
1029 cpu/mips/cpu.c: Fix flush_cache bug
1031 Cache operations have to take line address (addr), not start_addr.
1032 I noticed this bug when debugging ping failure.
1034 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
1036 commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
1037 Author: Martin Krause <martin.krause@tqs.de>
1038 Date: Thu Apr 3 14:29:01 2008 +0200
1040 TQM5200: fix default IDE reset level
1042 Before the first call of ide_reset(), the level of the IDE reset
1043 signal on the TQM5200 is low (reset asserted). This patch sets the
1044 default value to high (reset not asserted).
1046 Currently this patch fixes no real problem, but it is cleaner to
1047 assert the reset signal only on demand, and not permanently.
1049 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1051 commit c61e033d6e8abb7b4060ee36060961e1399f6079
1052 Author: Detlev Zundel <dzu@denx.de>
1053 Date: Thu Apr 3 14:18:48 2008 +0200
1055 mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
1057 Signed-off-by: Detlev Zundel <dzu@denx.de>
1059 commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
1060 Author: Detlev Zundel <dzu@denx.de>
1061 Date: Thu Apr 3 14:18:47 2008 +0200
1063 mgcoge, mgsuv: rename 'addcon' to 'addcons'
1065 The latter name with 13 users is already established, so we will use
1068 Signed-off-by: Detlev Zundel <dzu@denx.de>
1070 commit e175eacc87c3a9e4dad0799fee0e95732520afc7
1071 Author: Martin Krause <martin.krause@tqs.de>
1072 Date: Thu Apr 3 13:37:56 2008 +0200
1074 IDE: fix bug in reset sequence
1076 According to the ata (ata5) specification the RESET- signal
1077 shall be asserted for at least 25 us. Without this patch,
1078 the RESET- signal is asserted on some boards for only < 1 us
1079 (e. g. on the TQM5200). This patch adds a general delay of
1080 25 us to the RESET- signal.
1082 Without this patch a Platinum 4 GiB CF card is not recognised
1083 properly on boards with a TQM5200 (STK52xx, TB5200).
1085 Signed-off-by: Martin Krause <martin.krause@tqs.de>
1087 commit 813bea96a960916c72b4a3a7df840151529c26ce
1088 Author: Sascha Laue <Sascha.Laue@gmx.biz>
1089 Date: Thu Apr 3 14:43:11 2008 +0200
1091 lwmon5: disable CONFIG_ZERO_BOOTDELAY
1093 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
1095 commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
1096 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1097 Date: Wed Apr 2 08:03:58 2008 +0200
1099 ds174x: Fix warning on return in rtc_get and rtc_set functions
1101 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1103 commit a253b38bf50c85227c33ca0febc870ee49d1588e
1104 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1105 Date: Wed Apr 2 08:03:57 2008 +0200
1107 cmd_log.c: Fix assignment differ in signedness
1109 In function 'logbuff_init_ptrs':
1110 cmd_log.c:79: warning: pointer targets in assignment differ in signedness
1112 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1114 commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
1115 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
1116 Date: Wed Apr 2 11:04:43 2008 +0530
1118 Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
1120 Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
1122 commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
1123 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1124 Date: Tue Apr 1 14:07:10 2008 +0200
1126 s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
1128 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1130 commit c08fb3ea36d19b1640b7906264581e9105534399
1131 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
1132 Date: Tue Apr 15 10:24:14 2008 +0200
1134 Additional PCI IDs for IDE and network controllers
1136 These PCI IDs are required by the Linkstation platforms.
1138 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
1140 commit c0559be371b2a64b1a817088c3308688e2182f93
1141 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
1142 Date: Mon Apr 14 23:01:50 2008 +0200
1144 Change env_get_char from a global function ptr to a function.
1146 This avoids an early global data reference.
1148 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1150 commit 3e0f331c05d72f140715c1e9fca991927e44d422
1151 Author: Guennadi Liakhovetski <lg@denx.de>
1152 Date: Tue Apr 29 12:35:08 2008 +0000
1154 Clean up smsc911x driver
1156 Replace direct register address derefencing with accessor functions.
1157 Restrict explicitly 32-bit bus-width, extend affected configurations
1160 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1161 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1163 commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
1164 Author: Sascha Hauer <s.hauer@pengutronix.de>
1165 Date: Tue Apr 15 00:08:20 2008 -0400
1167 This patch adds a driver for the following smsc network controllers:
1175 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
1176 Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
1177 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1179 commit 3dfd4aab929cccddb63d9ea509967861e1333b52
1180 Author: Sascha Laue <Sascha.Laue@gmx.biz>
1181 Date: Tue Apr 1 15:13:03 2008 +0200
1183 Fix watchdog POST for lwmon5
1185 If the hardware watchdog detects a voltage error, the watchdog sets
1186 GPIO62 to low. The watchdog POST has to detect this low level.
1188 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
1190 commit 24b448448a917e52806f82660a5c9d47608894fb
1191 Author: Dave Liu <r63238@freescale.com>
1192 Date: Tue Apr 1 15:22:11 2008 +0800
1194 ata: update the libata.h from ata.h of linux kernel
1196 Current libata.h of u-boot is out of sync from linux kernel,
1197 this patch make it be consistent with linux kernel.
1199 Signed-off-by: Dave Liu <daveliu@freescale.com>
1200 Signed-off-by: Tor Krill <tor@excito.com>
1202 commit f8f9dc98883f66f59eb0601da65808e6b139c87c
1203 Author: Kumar Gala <galak@kernel.crashing.org>
1204 Date: Mon Mar 31 11:59:27 2008 -0500
1206 Allow use of ARCH=powerpc when building
1208 The linux kernel is now mostly ARCH=powerpc, so to make life easier
1209 allow use to use ARCH=powerpc and convert it to ARCH=ppc.
1211 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1213 commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
1214 Author: Kyungmin Park <kmpark@infradead.org>
1215 Date: Mon Mar 31 10:40:54 2008 +0900
1217 Add apollon board MAINTAINERS entry
1219 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1221 commit 77e475cc0ed1832160017d364be32a0be9ff02a9
1222 Author: Kyungmin Park <kmpark@infradead.org>
1223 Date: Mon Mar 31 10:40:36 2008 +0900
1227 It should access with 16-bit instead of 8-bit
1229 Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
1231 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1233 commit a9da2b41079d230db3a5641625311983f85ce1fb
1234 Author: Kyungmin Park <kmpark@infradead.org>
1235 Date: Mon Mar 31 10:40:19 2008 +0900
1237 Fix OneNAND erase command
1239 It mis-calculates the block address.
1240 Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
1242 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
1244 commit 61525f2ffa156665a66908fda47dbf29d65ea579
1245 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
1246 Date: Mon Mar 31 01:32:15 2008 +0200
1248 Support for LinkStation / KuroBox HD and HG PPC models
1250 This patch is based on the port by Mihai Georgian (see linkstation.c for
1251 Copyright information) and implements support for LinkStation / KuroBox HD
1252 and HG PPC models from Buffalo Technology, whereby HD is deactivated at
1253 the moment, pending network driver fixing.
1255 Notice to users: this is pretty much a barebone port. Support for network
1256 on HG models is already in the U-Boot mainline, but you might also want
1257 patches to switch fan / phy modes depending on the negotiated ethernet
1258 parameters. This patch also doesn't support console switching, booting EM
1259 mode, Buffalo specific ext2 magic number. So, if you want to use any of
1260 those, you need additional patches. Otherwise this patche provides a fully
1261 functional u-boot with a network console on your system.
1263 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1265 commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
1266 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1267 Date: Sun Mar 30 01:22:13 2008 -0500
1269 Add CONFIG_MII_INIT support to related boards
1271 Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
1272 cmd_init.c. Add CONFIG_MII_INIT to board configuration files
1273 that use mii_init() in cmd_init.c.
1275 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1276 Acked-by: Ben Warren <biggerbadderben@gmail.com>
1278 commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
1279 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1280 Date: Sun Mar 30 01:19:06 2008 -0500
1282 Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
1284 Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
1285 CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
1287 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1289 commit e99ccb488181d012248c6be30b2093e950319fc5
1290 Author: Kumar Gala <galak@kernel.crashing.org>
1291 Date: Thu Mar 27 11:46:38 2008 -0500
1293 Introduce phys_size_t and move phys_addr_t into asm/types.h
1295 Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
1296 that have larger physical addresses like 44x, 85xx, and 86xx.
1298 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1300 commit 20a14a42a25f72e379f38460b8a8484667536795
1301 Author: Andy Fleming <afleming@freescale.com>
1302 Date: Wed Apr 2 16:19:07 2008 -0500
1304 Rename include/md5.h to include/u-boot/md5.h
1306 Some systems have md5.h installed in /usr/include/. This isn't the
1307 desired file (we want the one in include/md5.h). This will avoid the
1308 conflict. This fixes the host tools building problem by creating a new
1309 directory for U-Boot specific header files.
1311 [Patch by Andy Fleming, modified to use separate directory by Wolfgang
1314 Signed-off-by: Wolfgang Denk <wd@denx.de>
1315 Signed-off-by: Andy Fleming <afleming@freescale.com>
1316 Acked-by: Timur Tabi <timur@freescale.com>
1318 commit f297b7a1ec87433f66320d89d993e1bc738c66b8
1319 Author: Dave Liu <r63238@freescale.com>
1320 Date: Thu Mar 27 18:51:17 2008 +0800
1322 drivers: code clean up
1324 Signed-off-by: Dave Liu <daveliu@freescale.com>
1326 commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
1327 Author: Dave Liu <r63238@freescale.com>
1328 Date: Thu Mar 27 18:50:41 2008 +0800
1330 drivers: clean up the ata_piix.h
1332 Signed-off-by: Dave Liu <daveliu@freescale.com>
1334 commit e8f7ba404f1409606962815ecc955a06984b08b3
1335 Author: Dave Liu <r63238@freescale.com>
1336 Date: Thu Mar 27 18:49:56 2008 +0800
1338 doc: english polishing for README.sata
1340 according to gvb's suggestion, polishing for the doc.
1342 Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
1343 Signed-off-by: Dave Liu <daveliu@freescale.com>
1345 commit 3e3f766a5274d204780460e1879723b565296d34
1346 Author: Kumar Gala <galak@kernel.crashing.org>
1347 Date: Wed Mar 26 18:53:28 2008 -0500
1349 Fix warnings introduced by I2C bus speed setting patch
1351 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1353 commit 3c735e7437150e8615f26930c7819db85634276d
1354 Author: eran liberty <eran.liberty@gmail.com>
1355 Date: Thu Mar 27 00:50:49 2008 +0100
1357 Altera Stratix II support
1359 Adds Support for Altera's Stratix II.
1361 Within your board specific init file you will have to call
1363 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
1364 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
1366 Altera_desc* contines (for example):
1368 Altera_StratixII, /* part type */
1369 passive_serial, /* interface type */
1370 1, /* bytes of data part can accept */
1371 (void *)(&funcs), /* interface function table */
1372 0L, /* base interface address */
1373 0 /* implementation specific cookie */
1376 funcs is the interface. It is of type altera_board_specific_func.
1378 altera_board_specific_func func = {
1389 you will have to implement these functions, which is usually bit
1392 Signed-off-by: Eran Liberty <liberty@extricom.com>
1394 commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
1395 Author: Wolfgang Denk <wd@denx.de>
1396 Date: Sun Apr 13 14:32:54 2008 -0700
1400 Signed-off-by: Wolfgang Denk <wd@denx.de>
1402 commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
1403 Author: Sascha Hauer <s.hauer@pengutronix.de>
1404 Date: Wed Mar 26 20:41:17 2008 +0100
1406 Phytec Phycore-i.MX31 support
1408 This patch adds support for the Phytec Phycore-i.MX31 board
1410 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
1411 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1413 commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
1414 Author: Sascha Hauer <s.hauer@pengutronix.de>
1415 Date: Wed Mar 26 20:41:09 2008 +0100
1417 mx31 litekit support
1419 This patch adds support for the mx31 litekit board
1421 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
1422 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1424 commit cdace0661208754a53019ea0dc7b803a040e0939
1425 Author: Sascha Hauer <s.hauer@pengutronix.de>
1426 Date: Wed Mar 26 20:40:49 2008 +0100
1428 add an i2c driver for mx31
1430 This patch adds an i2c driver for Freescale i.MX processors
1432 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
1433 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1435 commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
1436 Author: Sascha Hauer <s.hauer@pengutronix.de>
1437 Date: Wed Mar 26 20:40:42 2008 +0100
1439 core support for Freescale mx31
1441 This patch adds the core support for Freescale mx31
1443 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
1444 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1446 commit 7ec68862a27c8f6f6d566228de8f6724d964a939
1447 Author: Wolfgang Denk <wd@denx.de>
1448 Date: Sun Apr 13 14:19:23 2008 -0700
1452 ...as suggested by Peter Pearse
1454 Signed-off-by: Wolfgang Denk <wd@denx.de>
1456 commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
1457 Author: Sascha Hauer <s.hauer@pengutronix.de>
1458 Date: Wed Mar 26 20:40:36 2008 +0100
1460 Separate omap24xx specific code from arm1136
1462 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
1463 to cpu/arm1136/omap24xx.
1465 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
1466 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1468 commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
1469 Author: Mike Frysinger <vapier@gentoo.org>
1470 Date: Tue Jan 29 18:21:05 2008 -0500
1472 disable caches before booting an app for Blackfin apps
1474 It isn't generally save to execute applications outside of U-Boot with caches
1475 enabled due to the way the Blackfin processor handles caches (requires
1476 software assistance). This patch disables caches before booting an ELF or
1477 just booting raw code. The previous discussion on the patch was that we
1478 wanted to use weaks instead, but that proved to not be feasible when multiple
1479 symbols are involved, which puts us back at the ifdef solution. I've
1480 minimized the ugliness by moving the setup step outside of the main function.
1482 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1484 commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
1485 Author: Wolfgang Denk <wd@denx.de>
1486 Date: Sun Apr 13 10:03:54 2008 -0700
1488 ppc: Get rid of unused machine type definitions
1490 Signed-off-by: Wolfgang Denk <wd@denx.de>
1492 commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
1493 Author: Wolfgang Denk <wd@denx.de>
1494 Date: Sun Apr 13 09:59:26 2008 -0700
1496 Coding Style cleanup; update CHANGELOG
1498 Signed-off-by: Wolfgang Denk <wd@denx.de>
1500 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
1501 Author: Larry Johnson <lrj@acm.org>
1502 Date: Thu Feb 21 13:58:11 2008 -0500
1504 LM73 bug fix for negative temperatures and cleanup
1506 When the LM73 temperature sensor measures a temperature below 0 C, the
1507 current driver does not perform sign extension, so the result returned is
1508 512 C too high. This patch fixes the problem, and does general cleanup
1511 Signed-off-by: Larry Johnson <lrj@acm.org>
1513 commit 96ef831f713289afba19da0c8f905e99da2b23e0
1514 Author: Guennadi Liakhovetski <lg@denx.de>
1515 Date: Thu Apr 3 13:36:02 2008 +0200
1517 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
1519 Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
1520 series require different addresses for buffered write commands. Define a
1521 configuration option to support buffered writes on those chips. A more
1522 elegant solution would be to automatically detect those chips by parsing
1523 their CFI records, but that would require introduction of a fixup table
1524 into the cfi_flash driver.
1526 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1528 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
1529 Author: Lee Nipper <lee.nipper@freescale.com>
1530 Date: Thu Apr 10 09:35:06 2008 -0500
1532 mpc83xx: Update DIMM data bus width test to support 40-bit width
1534 32-bit wide ECC memory modules report 40-bit width.
1535 Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
1537 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
1538 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1540 commit 5fb5a689d822ca61e814bd523fc930af335242fa
1541 Author: Dave Liu <r63238@freescale.com>
1542 Date: Mon Mar 31 17:05:12 2008 +0800
1544 mpc83xx: Fix the bug of serdes initialization
1546 Currently the serdes will not be initializated due to the
1549 Signed-off-by: Dave Liu <daveliu@freescale.com>
1550 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1552 commit 2000784818f043db7ca60e2846a72d097766b894
1553 Author: Dave Liu <r63238@freescale.com>
1554 Date: Thu Apr 3 16:28:29 2008 +0800
1556 mpc83xx: Fix the SATA clock setting of 837x targets
1558 Currently the SATA controller clock is configured as CSB clock,
1559 usually the CSB clock is 400/333/266MHz.
1561 However, The SATA IP block is only guaranteed to operate up to
1562 200 MHz as stated in the HW spec.
1564 The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
1566 This patch makes the SATA clock as half of CSB clock.
1568 Signed-off-by: Dave Liu <daveliu@freescale.com>
1569 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1571 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
1572 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1573 Date: Wed Apr 2 13:41:21 2008 +0200
1575 mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
1577 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1578 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1580 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
1581 Author: Kumar Gala <galak@kernel.crashing.org>
1582 Date: Wed Apr 9 04:20:57 2008 -0500
1584 85xx: Fix detection of MP cpu spin up
1586 We were looking at the wrong memory offset to determine of a secondary
1587 cpu had been spun up or not. Also added a warning message if the
1588 all the secondary cpus we expect don't spin up.
1590 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1592 commit f3e04bdc3f360c66801a9048956e61e41a16edba
1593 Author: Kumar Gala <galak@kernel.crashing.org>
1594 Date: Tue Apr 8 10:45:50 2008 -0500
1596 85xx: Use SVR_SOC_VER instead of SVR_VER
1598 The recent change introduced by 'Update SVR numbers to expand support'
1599 now requires that we use SVR_SOC_VER instead of SVR_VER if we want
1600 to compare against a particular processor id.
1602 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1604 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
1605 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
1606 Date: Fri Apr 11 10:00:35 2008 -0400
1608 ppc4xx: Fix power mgt definitions for PPC440
1610 Corrected DCR addresses of PPC440EP power management registers.
1612 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
1614 commit 950a392464e616b4590bc4501be46e2d7d162dea
1615 Author: Wolfgang Denk <wd@denx.de>
1616 Date: Fri Apr 11 15:11:26 2008 +0200
1618 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
1620 Reverting became necessary after it turned out that the patches in
1621 the u-boot-arm repo were modified, and in some cases corrupted.
1623 This reverts the following commits:
1625 066bebd6353e33af3adefc3404560871699e9961
1626 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
1627 c88ae20580b2b01487b4cdcc8b2a113f551aee36
1628 a147e56f03871bba4f05058d5e04ce7deb010b04
1629 d6674e0e2a6a1f033945f78838566210d3f28c95
1630 8c8463cce44d849e37744749b32d38e1dfb12e50
1631 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
1632 8bf69d81782619187933a605f1a95ee1d069478d
1633 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
1634 a574a73852a527779234e73e17e7597fd8128882
1635 1377b5583a48021d983e1fd565f7d40c89e84d63
1636 1704dc20917b4f71e373e2c888497ee666d40380
1638 Signed-off-by: Wolfgang Denk <wd@denx.de>
1640 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
1641 Author: Stefan Roese <sr@denx.de>
1642 Date: Fri Apr 11 07:02:29 2008 +0200
1644 ppc4xx: Update Kilauea defconfig to use device-tree booting as default
1646 This patch reworks the default environment on Kilauea/Haleakala. Now
1647 "net_nfs" for exmaple uses the device-tree style booting formerly know
1648 as "net_nfs_fdt". Also the addresses in RAM were changed because of the
1649 new image booting support, which check for image overwriting. So the
1650 addresses needed togeet adjusted.
1652 Signed-off-by: Stefan Roese <sr@denx.de>
1654 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
1655 Author: Stefan Roese <sr@denx.de>
1656 Date: Wed Apr 9 11:58:02 2008 +0200
1658 ppc4xx: Fix Canyonlands default environment to work with new image support
1660 Since the new image support checks for image overwriting, the default
1661 environment needs to get adjusted to use correct addresses.
1663 Signed-off-by: Stefan Roese <sr@denx.de>
1665 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
1666 Author: Stefan Roese <sr@denx.de>
1667 Date: Wed Apr 9 11:54:11 2008 +0200
1669 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
1671 The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
1672 closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
1673 on 4xx systems _start currently cannot be used for this calculation.
1674 So revert back to the original version for now.
1676 Signed-off-by: Stefan Roese <sr@denx.de>
1678 commit f91374f65eae8b42cac329e06ba1c54728278efb
1679 Author: Michal Simek <monstr@monstr.eu>
1680 Date: Fri Mar 28 12:49:52 2008 +0100
1682 microblaze: Sort microblaze boards in MAKEALL script
1684 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
1685 Author: Michal Simek <monstr@monstr.eu>
1686 Date: Fri Mar 28 11:58:45 2008 +0100
1688 microblaze: clean microblaze_config.mk
1690 FLAGS are generated by U-BOOT generator.
1691 Board specific FLAGS are in board directory
1693 Signed-off-by: Michal Simek <monstr@monstr.eu>
1695 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
1696 Author: Michal Simek <monstr@monstr.eu>
1697 Date: Fri Mar 28 12:47:19 2008 +0100
1699 microblaze: xupv2p fix config file for supporting FDT
1701 commit 188dc16b189143573b1ed90e584bf866d75cdd12
1702 Author: Michal Simek <monstr@monstr.eu>
1703 Date: Fri Mar 28 11:53:02 2008 +0100
1705 microblaze: ml401 fix config file for supporting FDT
1707 Signed-off-by: Michal Simek <monstr@monstr.eu>
1709 commit 4c6a6f02e239236261333759997eeaf86b30b54c
1710 Author: Michal Simek <monstr@monstr.eu>
1711 Date: Fri Mar 28 11:22:48 2008 +0100
1713 microblaze: ml401 - add ifdef for GPIO
1715 Signed-off-by: Michal Simek <monstr@monstr.eu>
1717 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
1718 Author: Michal Simek <monstr@monstr.eu>
1719 Date: Fri Mar 28 12:13:03 2008 +0100
1721 microblaze: clean uart16550 and uartlite handling
1723 Signed-off-by: Michal Simek <monstr@monstr.eu>
1725 commit 0b20f250877441460fb79d72192954abe8498834
1726 Author: Michal Simek <monstr@monstr.eu>
1727 Date: Fri Mar 28 11:08:31 2008 +0100
1729 microblaze: Add Emaclite driver to Makefile
1731 Signed-off-by: Michal Simek <monstr@monstr.eu>
1733 commit 868cde5310f88234b774878e4f06e79df10a88b3
1734 Author: Michal Simek <monstr@monstr.eu>
1735 Date: Fri Mar 28 11:08:01 2008 +0100
1737 microblaze: Add Emac driver to Makefile
1739 Signed-off-by: Michal Simek <monstr@monstr.eu>
1741 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
1742 Author: Michal Simek <monstr@monstr.eu>
1743 Date: Fri Mar 28 12:42:29 2008 +0100
1745 microblaze: add Emac ethernet driver
1747 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
1748 Author: Michal Simek <monstr@monstr.eu>
1749 Date: Fri Mar 28 12:41:56 2008 +0100
1751 microblaze: add Emaclite ethernet driver
1753 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
1754 Author: Michal Simek <monstr@monstr.eu>
1755 Date: Fri Mar 28 11:04:01 2008 +0100
1757 microblaze: ML401 and XUPV2P remove emac and emaclite reference
1759 Signed-off-by: Michal Simek <monstr@monstr.eu>
1761 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
1762 Author: Michal Simek <monstr@monstr.eu>
1763 Date: Fri Mar 28 10:59:32 2008 +0100
1765 microblaze: remove old setting for emac driver
1767 Signed-off-by: Michal Simek <monstr@monstr.eu>
1769 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
1770 Author: Michal Simek <monstr@monstr.eu>
1771 Date: Fri Mar 28 10:58:15 2008 +0100
1773 microblaze: Clean Makefile from ancient emac driver
1775 Signed-off-by: Michal Simek <monstr@monstr.eu>
1777 commit ab68f921d9c741830f721c3d879c13a0c5597183
1778 Author: Daniel Hellstrom <daniel@gaisler.com>
1779 Date: Fri Mar 28 10:20:43 2008 +0100
1781 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
1783 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1785 commit 6ed8a43a19bb0275501bc286007daafa923552cf
1786 Author: Daniel Hellstrom <daniel@gaisler.com>
1787 Date: Wed Mar 26 23:38:48 2008 +0100
1789 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
1791 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1793 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
1794 Author: Daniel Hellstrom <daniel@gaisler.com>
1795 Date: Wed Mar 26 23:34:47 2008 +0100
1797 SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
1799 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1801 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
1802 Author: Daniel Hellstrom <daniel@gaisler.com>
1803 Date: Fri Mar 28 10:06:52 2008 +0100
1805 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
1807 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1809 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
1810 Author: Daniel Hellstrom <daniel@gaisler.com>
1811 Date: Wed Mar 26 23:26:48 2008 +0100
1813 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
1815 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1817 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
1818 Author: Daniel Hellstrom <daniel@gaisler.com>
1819 Date: Fri Mar 28 10:00:33 2008 +0100
1821 SPARC: Added support for SPARC LEON2 SOC Processor.
1823 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1825 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
1826 Author: Daniel Hellstrom <daniel@gaisler.com>
1827 Date: Wed Mar 26 23:00:38 2008 +0100
1829 SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
1831 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1833 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
1834 Author: Daniel Hellstrom <daniel@gaisler.com>
1835 Date: Wed Mar 26 22:51:29 2008 +0100
1837 SPARC: Added support for SPARC LEON3 SOC processor.
1839 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1841 commit bf3d8b31169546fcddb4737391e1893fb12d033a
1842 Author: Daniel Hellstrom <daniel@gaisler.com>
1843 Date: Fri Mar 28 08:29:26 2008 +0100
1845 SPARC: added SPARC support for new uimage in common code.
1847 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1849 commit 00ab32c85405a4fe65fd4128243086210fc90a21
1850 Author: Daniel Hellstrom <daniel@gaisler.com>
1851 Date: Wed Mar 26 22:36:03 2008 +0100
1853 SPARC: added SPARC board information to the command bdinfo.
1855 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1857 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
1858 Author: Daniel Hellstrom <daniel@gaisler.com>
1859 Date: Fri Mar 28 09:47:00 2008 +0100
1861 SPARC: Added generic support for SPARC architecture.
1863 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
1865 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
1866 Author: Stefan Roese <sr@denx.de>
1867 Date: Thu Apr 3 14:50:34 2008 +0200
1869 ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
1871 This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
1872 has 2 RGMII instances and we need to configure the 2nd RGMII instance
1873 for the EMAC2+3 channels.
1875 Signed-off-by: Stefan Roese <sr@denx.de>
1877 commit c2a545ce33b26d80337f80b533828839249fb1c9
1878 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1879 Date: Wed Apr 2 08:03:56 2008 +0200
1881 MPC8xx: Fix libfdt support introduced in commit 77ff7b74
1883 fdt.c: In function 'ft_cpu_setup':
1884 fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
1885 fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
1886 fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
1887 fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
1889 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1891 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
1892 Author: Andy Fleming <afleming@freescale.com>
1893 Date: Mon Mar 31 20:45:56 2008 -0500
1895 Fix fdt set command to conform to dts spec
1897 The fdt set command was treating properties specified as <00> and <0011>
1898 as byte streams, rather than as an array of cells. As we already have
1899 syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
1900 we should use the <> syntax to describe arrays of cells, which are always
1901 32-bits per element. If we imagine this likely (IMHO) scenario:
1903 > fdt set /ethernet-phy@1 reg <1>
1905 With the old code, this would create a bad fdt, since the reg cell would be
1906 made to be one byte in length. But the cell must be 4 bytes, so this would
1909 Also, the dts spec calls for constants inside the angle brackets (<>)
1910 to conform to C constant standards as they pertain to base.
1913 > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
1915 The old fdt command would complain that it couldn't parse that. Or, if you
1916 wanted to specify that a certain clock ran at 33 MHz, you'd be required to
1919 > fdt set /mydev clock <1f78a40>
1921 Whereas the new code will accept decimal numbers.
1923 While I was in there, I extended the fdt command parser to handle property
1924 strings which are split across multiple arguments:
1926 > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
1927 > fdt p /ethernet@f00
1929 interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
1932 Lastly, the fdt print code was rearranged slightly to print arrays of cells
1933 if the length of the property is a multiple of 4 bytes, and to not print
1936 Signed-off-by: Andy Fleming <afleming@freescale.com>
1938 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
1939 Author: Stefan Roese <sr@denx.de>
1940 Date: Wed Apr 2 08:39:33 2008 +0200
1942 ppc4xx: Canyonlands: Init SATA/PCIe port correctly
1944 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
1945 interface. This usage can be configured with the jumper J6. This patch
1946 correctly configures the SATA/PCIe PHY for SATA usage when this jumper
1949 Signed-off-by: Stefan Roese <sr@denx.de>
1951 commit 6fe2946f198481254a6ee9600d7456b8316a4083
1952 Author: Kim Phillips <kim.phillips@freescale.com>
1953 Date: Fri Mar 28 17:37:49 2008 -0500
1955 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
1957 finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
1958 "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
1961 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1963 commit b5873f1732b92a25690e1513b90dfb0d644f6697
1964 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1965 Date: Tue Apr 1 07:30:51 2008 +0200
1967 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
1969 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1971 commit 2d934ea51f276522b532f870a820e844ff480b5b
1972 Author: Tor Krill <tor@excito.com>
1973 Date: Fri Mar 28 15:29:45 2008 +0100
1975 Add Vitesse 8601 support to TSEC driver
1977 Add phy_info for Vitesse VSC8601.
1978 Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
1980 Signed-off-by: Tor Krill <tor@excito.com>
1981 Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
1982 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1984 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
1985 Author: Daniel Hellstrom <daniel@gaisler.com>
1986 Date: Mon Mar 31 14:25:00 2008 +0000
1988 SPARC: added SMC91111 driver in and out macros for LEON processors.
1990 This patch makes SPARC/LEON processors able to read and write
1991 to the SMC91111 chip using the chip external I/O bus of the memory
1992 controller. This patchs defines the standard in and out macros
1993 expected by the SMC9111 driver.
1995 To access that I/O bus one must set up the memory controller
1996 (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
1997 up this correctly when the other MCTRL parameters are set up. It
1998 can be set up from the board configuration header file.
2000 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2001 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2003 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
2004 Author: Stelian Pop <stelian@popies.net>
2005 Date: Wed Mar 26 18:52:34 2008 +0100
2007 Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
2009 Signed-off-by: Stelian Pop <stelian@popies.net>
2011 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
2012 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013 Date: Mon Mar 31 21:31:04 2008 +0200
2015 AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
2017 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2019 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
2020 Author: Stelian Pop <stelian@popies.net>
2021 Date: Wed Mar 26 18:52:33 2008 +0100
2023 Add support for AT91SAM9260EK
2025 Support for booting from internal DataFlash, external DataFlash card
2026 or NAND flash is available.
2028 Signed-off-by: Stelian Pop <stelian@popies.net>
2030 commit 1762f13b4aab88b685b1722f17dada247945624b
2031 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2032 Date: Mon Mar 31 21:20:49 2008 +0200
2034 AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
2036 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2038 commit 761712188b353494defb2b644491ff73d0daaa6f
2039 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2040 Date: Mon Mar 31 21:12:17 2008 +0200
2042 AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
2044 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2046 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
2047 Author: Stelian Pop <stelian@popies.net>
2048 Date: Wed Mar 26 20:52:32 2008 +0100
2050 Port AT91CAP9 to the new headers
2052 Adapt the existing AT91CAP9 code to the new headers and APIs.
2054 Signed-off-by: Stelian Pop <stelian@popies.net>
2056 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
2057 Author: Stelian Pop <stelian@popies.net>
2058 Date: Wed Mar 26 19:52:31 2008 +0100
2060 Finish header files reworking
2062 Replace AT91CAP9.h file with several splitted header files coming
2063 from the Linux kernel.
2065 This is part 2 of the replacement: more header imports and edits.
2067 Signed-off-by: Stelian Pop <stelian@popies.net>
2069 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
2070 Author: Stelian Pop <stelian@popies.net>
2071 Date: Wed Mar 26 19:52:30 2008 +0100
2073 Import several header files from Linux
2075 Replace AT91CAP9.h file with several splitted header files coming
2076 from the Linux kernel.
2078 This is part 1 of the replacement: pristine header files import.
2080 Signed-off-by: Stelian Pop <stelian@popies.net>
2082 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
2083 Author: Stelian Pop <stelian@popies.net>
2084 Date: Wed Mar 26 20:52:28 2008 +0100
2086 Move at91cap9 specific files to at91sam9 directory
2088 AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
2089 common infrastructure can be used. Let this infrastructure be
2090 named after the AT91SAM9 family, and move the existing AT91CAP9
2091 files to the new place.
2093 Signed-off-by: Stelian Pop <stelian@popies.net>
2095 commit 61106a565870ff503f92b251b94bd7afef889a04
2096 Author: Stelian Pop <stelian@popies.net>
2097 Date: Wed Mar 26 21:52:27 2008 +0100
2099 Use timer_init() instead of board supplied interrupt_init()
2101 The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
2102 the board, so use timer_init() instead of interrupt_init().
2104 Signed-off-by: Stelian Pop <stelian@popies.net>
2106 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
2107 Author: Stelian Pop <stelian@popies.net>
2108 Date: Wed Mar 26 21:52:36 2008 +0100
2110 Cleanup DataFlash partition handling
2112 DataFlash partition information has become a mess. This patch
2113 defines a single partition scheme for Atmel DataFlashes. This partition
2114 scheme will be used by all AT91CAP9 and AT91SAM9 boards.
2116 Signed-off-by: Stelian Pop <stelian@popies.net>
2118 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
2119 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2120 Date: Fri Mar 28 08:47:45 2008 -0500
2122 ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
2124 When the version_string function in start.S is not 4-byte align,
2125 it will cause the compiler generates "unaligned opcodes detected
2126 in executable segment". This issue affects all ColdFire CPUs.
2127 By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
2130 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2131 Acked-by: John Rigby <jrigby@freescale.com>
2133 commit bae61eefe15b4d454060a7140e49ae58322be803
2134 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2135 Date: Tue Mar 25 15:41:15 2008 -0500
2137 ColdFire: Add dspi and serial flash support for MCF5445x
2139 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2140 Acked-by: John Rigby <jrigby@freescale.com>
2142 commit 48ead7a7a922fceaf494e352abfab8216a41b417
2143 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2144 Date: Tue Mar 18 17:37:01 2008 -0500
2146 ColdFire: Remove R5200 board
2148 This board never went into production
2150 Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
2151 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2152 Acked-by: John Rigby <jrigby@freescale.com>
2154 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
2155 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
2156 Date: Thu Jan 24 14:02:32 2008 -0600
2158 ColdFire: Added M5275EVB support.
2160 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
2161 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2162 Acked-by: John Rigby <jrigby@freescale.com>
2164 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
2165 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
2166 Date: Mon Feb 4 15:38:20 2008 -0600
2168 ColdFire: Added MCF5275 cpu support.
2170 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
2171 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2172 Acked-by: John Rigby <jrigby@freescale.com>
2174 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
2175 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2176 Date: Mon Mar 17 12:14:11 2008 -0500
2178 ColdFire: Define bootdelay in configuration file for M52277EVB
2180 Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
2181 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2182 Acked-by: John Rigby <jrigby@freescale.com>
2184 commit 77878f16cedee17161ff2336990970fffc6cea35
2185 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2186 Date: Mon Mar 17 12:09:07 2008 -0500
2188 ColdFire: Fix second memory Chipselect for M5475EVB
2190 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2191 Acked-by: John Rigby <jrigby@freescale.com>
2193 commit 43d60642395a550956cb21d287c8cfa563913d28
2194 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2195 Date: Thu Mar 13 14:26:32 2008 -0500
2197 ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
2199 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2200 Acked-by: John Rigby <jrigby@freescale.com>
2202 commit eb14ebe813a0cb5d47905228da446a5ad692473b
2203 Author: Larry Johnson <lrj@acm.org>
2204 Date: Sun Mar 30 20:33:04 2008 -0500
2206 ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
2208 Signed-off-by: Larry Johnson <lrj@acm.org>
2210 commit 02e3892021112f21067d9ed1d04ae4182725ba52
2211 Author: Stefan Roese <sr@denx.de>
2212 Date: Mon Mar 31 12:20:48 2008 +0200
2214 ppc4xx: Small whitespace fix of esd patches
2216 Signed-off-by: Stefan Roese <sr@denx.de>
2218 commit 034394abb524785047c815f00dde8cdbdc1593c5
2219 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2220 Date: Sun Mar 30 18:52:44 2008 +0200
2222 ppc4xx: Cleanup PMC440 board support
2224 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2226 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
2227 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2228 Date: Sun Mar 30 18:52:06 2008 +0200
2230 ppc4xx: Add ptm configuration variables for PMC440
2232 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
2233 environment variables.
2235 Cleanup pci_target_init.
2237 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2239 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
2240 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2241 Date: Sun Mar 30 18:01:15 2008 +0200
2243 ppc4xx: Minor updates for DU440 boards
2245 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2247 commit d5bffeb868d6b4d462f558dac43011027b6644b7
2248 Author: Mike Frysinger <vapier@gentoo.org>
2249 Date: Tue Feb 19 00:54:20 2008 -0500
2251 Blackfin: cleanup and overhaul common board init functions
2253 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2255 commit b86b3416f874358acaf07519e7620cdb2145f75b
2256 Author: Mike Frysinger <vapier@gentoo.org>
2257 Date: Tue Feb 19 00:50:58 2008 -0500
2259 Blackfin: cleanup lib_blackfin/cache.c
2261 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2263 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
2264 Author: Mike Frysinger <vapier@gentoo.org>
2265 Date: Sun Mar 30 15:46:13 2008 -0400
2267 Blackfin: unify cpu and boot modes
2269 All of the duplicated code for Blackfin processors and boot modes have been
2270 unified. After all, the core is the same for all processors, just the
2271 peripheral set differs (which gets handled in the drivers).
2273 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2275 commit 880cc4381ea8360248cddcdf87a64566745a5724
2276 Author: Stelian Pop <stelian@popies.net>
2277 Date: Wed Mar 26 22:52:35 2008 +0100
2279 Fix CFG_NO_FLASH compilation.
2281 Many Atmel boards have no "real" (NOR) flash on board, and rely only
2282 on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
2283 be present in a board configuration file, while still enabling flash
2284 commands like 'flinfo', 'protect', etc.
2286 Signed-off-by: Stelian Pop <stelian@popies.net>
2288 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
2289 Author: Mike Frysinger <vapier@gentoo.org>
2290 Date: Tue Feb 19 00:58:13 2008 -0500
2292 Blackfin: BF537-stamp: cleanup spi flash driver
2294 This punts the old spi flash driver for a new/generalized one until the
2295 common one can be integrated.
2297 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2299 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
2300 Author: Ben Warren <biggerbadderben@gmail.com>
2301 Date: Sun Mar 30 11:34:34 2008 -0400
2303 Fix macro typo in common/cmd_mii.c
2305 This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
2306 actually applied the wrong patch.
2308 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2310 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
2311 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2312 Date: Sun Mar 30 16:39:53 2008 +0200
2314 use correct at91rm9200 register name in m501sk board
2316 This fixes a naming bug for at91rm9200 lowlevel init code:
2317 NOR boot flash is on chipselect 0, not chipselect 2. This
2318 makes code use the register name from chip datasheets.
2320 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2322 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
2323 Author: David Brownell <david-b@pacbell.net>
2324 Date: Fri Jan 18 12:55:00 2008 -0800
2326 use correct at91rm9200 register name
2328 This fixes a naming bug for at91rm9200 lowlevel init code:
2329 NOR boot flash is on chipselect 0, not chipselect 2. This
2330 makes code use the register name from chip datasheets.
2332 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2334 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
2335 Author: David Brownell <david-b@pacbell.net>
2336 Date: Fri Jan 18 12:45:45 2008 -0800
2338 add missing ARM boards to MAKEALL
2340 Add some missing ARM boards to MAKEALL. These build correctly,
2341 unlike several of the boards already listed.
2343 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2345 commit 066bebd6353e33af3adefc3404560871699e9961
2346 Author: Peter Pearse <peter.pearse@arm.com>
2347 Date: Sun Mar 30 11:34:09 2008 +0100
2349 Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
2350 to prevent compilation error.
2352 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
2354 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
2355 Author: Guennadi Liakhovetski <[lg@denx.de]>
2356 Date: Sun Mar 30 11:32:30 2008 +0100
2358 Support for the MX31ADS evaluation board from Freescale
2360 This patch adds support for the MX31ADS evaluation board from Freescale,
2361 initialization code is copied from RedBoot sources, also provided by Freescale.
2363 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2365 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
2366 Author: Sascha Hauer <s.hauer@pengutronix.de>
2367 Date: Sun Mar 30 11:32:27 2008 +0100
2369 Phytec Phycore-i.MX31 support
2371 This patch adds support for the Phytec Phycore-i.MX31 board
2373 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2374 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2376 commit a147e56f03871bba4f05058d5e04ce7deb010b04
2377 Author: Sascha Hauer <s.hauer@pengutronix.de>
2378 Date: Sun Mar 30 11:32:24 2008 +0100
2380 mx31 litekit support
2382 This patch adds support for the mx31 litekit board
2384 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2385 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2387 commit d6674e0e2a6a1f033945f78838566210d3f28c95
2388 Author: Sascha Hauer <s.hauer@pengutronix.de>
2389 Date: Sun Mar 30 11:32:21 2008 +0100
2391 add SMSC LAN9x1x Network driver
2393 This patch adds a driver for the following smsc network controllers:
2401 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2402 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2404 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
2405 Author: Sascha Hauer <s.hauer@pengutronix.de>
2406 Date: Sun Mar 30 11:32:16 2008 +0100
2408 add an i2c driver for mx31
2410 This patch adds an i2c driver for Freescale i.MX processors
2412 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2413 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2415 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
2416 Author: Sascha Hauer <s.hauer@pengutronix.de>
2417 Date: Sun Mar 30 11:30:43 2008 +0100
2419 core support for Freescale mx31
2421 This patch adds the core support for Freescale mx31
2423 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2424 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2426 commit 8bf69d81782619187933a605f1a95ee1d069478d
2427 Author: Sascha Hauer <s.hauer@pengutronix.de>
2428 Date: Sun Mar 30 11:28:46 2008 +0100
2430 Separate omap24xx specific code from arm1136
2432 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
2434 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2435 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2437 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
2438 Author: Peter Pearse <peter.pearse@arm.com>
2439 Date: Sun Mar 30 11:23:05 2008 +0100
2441 Add pmdra into MAKEALL
2443 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
2445 commit a574a73852a527779234e73e17e7597fd8128882
2446 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
2447 Date: Sun Mar 30 11:21:58 2008 +0100
2449 Adds support for the Prodrive PMDRA board, based on a DM6441
2451 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
2453 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
2454 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
2455 Date: Sun Mar 30 11:11:34 2008 +0100
2457 Removes all board specific code from the arch. part for DM644x (DaVinci) boards
2459 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
2461 commit 1704dc20917b4f71e373e2c888497ee666d40380
2462 Author: Dirk Behme <dirk.behme@gmail.com>
2463 Date: Sun Mar 30 11:09:01 2008 +0100
2465 - Remove *_masked() functions as noted by Wolfgang
2466 - Adapt register naming to recent TI spec (sprue26, March 2007)
2467 - Fix reset_timer() handling
2468 - As reported by Pieter [1] the overflow fix introduced a
2469 delay of factor 16 (e.g 2 seconds became 32). While the
2470 overflow fix is basically okay, it missed to divide udelay by
2472 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
2473 - Remove software division of timer count value (DIV(x)
2474 macro) and do it in hardware (TIM_CLK_DIV).
2475 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
2476 and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
2477 the hints & testing!
2479 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
2481 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
2483 commit ac3315c26e143c31680750c9c13f027efbcc887e
2484 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
2485 Date: Thu Mar 6 16:45:44 2008 +0100
2487 new PHY @ e1000 - 2nd try
2489 Add 82541ER device with latest integrated IGP2 PHY.
2490 Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
2492 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
2493 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2495 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
2496 Author: Daniel Hellstrom <daniel@gaisler.com>
2497 Date: Fri Mar 28 20:22:53 2008 +0100
2499 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
2501 GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
2502 a debug link (EDCL). The GRETH core is documented in GRIP.pdf
2503 available at www.gaisler.com.
2505 If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
2506 offloading etc.) can be determined by a bit in the control register.
2507 The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
2509 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2510 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2512 commit 233a8bcd94997f3f345833a3b82e836222f2a206
2513 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
2514 Date: Mon Mar 17 17:08:22 2008 -0500
2516 Add CONFIG_MII_INIT in cmd_mii.c
2518 Provide common configuration in do_mii() to execute mii_init()
2519 for all cpu architectures
2521 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2522 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2524 commit f605479de2deb11e834f31dfdb0af107c86aced6
2525 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
2526 Date: Mon Mar 17 17:08:16 2008 -0500
2528 ColdFire: Fix FEC transmit issue for MCF5275
2530 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2531 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2533 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
2534 Author: Aras Vaichas <arasv@magtech.com.au>
2535 Date: Wed Mar 26 09:43:57 2008 +1100
2537 DHCP request fix for Windows Server 2003
2539 Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
2540 delay before sending "DHCP Request" in net/bootp.c. Required to overcome
2541 interoperability problems with Windows Server 200x DHCP server when U-Boot
2542 client responds too fast for server to handle.
2544 Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
2545 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2547 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
2548 Author: Daniel Hellstrom <daniel@gaisler.com>
2549 Date: Fri Mar 28 20:40:19 2008 +0100
2551 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
2553 SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
2554 SPARC CPUs implement flash_read64 which calls __raw_readq.
2556 For current SPARC architectures (LEON2 and LEON3) each read from the
2557 FLASH must lead to a cache miss. This is because FLASH can not be set
2558 non-cacheable since program code resides there, and alternatively disabling
2559 cache is poor from performance view, or doing a cache flush between each
2560 read is even poorer.
2562 Forcing a cache miss on a SPARC is done by a special instruction "lda" -
2563 load alternative space, the alternative space number (ASI) is processor
2564 implementation spcific and can be found by including <asm/processor.h>.
2566 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
2568 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
2569 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2570 Date: Fri Mar 28 15:41:25 2008 +0100
2572 Make MPC83xx one step closer to full relocation.
2574 Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
2575 and use GOT relative reference.
2577 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2578 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2580 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
2581 Author: Michael Barkowski <michael.barkowski@freescale.com>
2582 Date: Thu Mar 27 14:34:43 2008 -0400
2584 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
2586 This patch fixes eeprom page size so that you can now write more than
2589 It also makes the board take MAC addresses, if found, from EEPROM.
2591 User should place up to 4 addresses at offset 0x7f00, for
2592 eth{,1,2,3}addr. Any unused addresses should be zero. This group of
2593 four six-byte values should have it's CRC at the end. crc32 and
2594 eeprom commands can be used to accomplish this.
2596 If CRC fails, MAC addresses come from the environment. If CRC
2597 succeeds, the environment is overwritten at startup.
2599 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
2600 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2602 commit 8f325cff31f6e745e6540014b131b9a97f61944c
2603 Author: Michael Barkowski <michael.barkowski@freescale.com>
2604 Date: Fri Mar 28 15:15:38 2008 -0400
2606 mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
2608 Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
2609 controller on the PCI bus in Linux on the MPC8323ERDB.
2611 This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
2614 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
2615 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2617 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
2618 Author: Kim Phillips <kim.phillips@freescale.com>
2619 Date: Fri Mar 28 10:19:07 2008 -0500
2621 mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
2623 in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
2624 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
2625 and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
2626 REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
2629 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2631 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
2632 Author: Kim Phillips <kim.phillips@freescale.com>
2633 Date: Fri Mar 28 10:18:53 2008 -0500
2635 mpc83xx: display ddr frequency in board_add_ram_info banner
2637 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2639 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
2640 Author: Kim Phillips <kim.phillips@freescale.com>
2641 Date: Fri Mar 28 10:18:40 2008 -0500
2643 mpc83xx: unreinvent mem_clk
2645 delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
2646 mem_*_clk for consistency's sake.
2648 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2650 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
2651 Author: Kim Phillips <kim.phillips@freescale.com>
2652 Date: Fri Mar 28 14:31:23 2008 -0500
2654 mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
2656 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2658 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
2659 Author: Dave Liu <r63238@freescale.com>
2660 Date: Wed Mar 26 22:57:19 2008 +0800
2662 mpc83xx: enable the SATA interface on mpc837xemds board
2664 Enable the first two SATA interfaces on MPC837xEMDS board,
2665 The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
2667 Signed-off-by: Dave Liu <daveliu@freescale.com>
2668 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2670 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
2671 Author: Dave Liu <r63238@freescale.com>
2672 Date: Wed Mar 26 22:56:36 2008 +0800
2674 mpc83xx: initialize serdes for MPC837xEMDS boards
2676 This patch is stolen from Anton Vorontsov's patch
2677 for mpc837xerdb boards.
2679 The reference clk and xcorevdd voltage of serdes1/2
2680 is same between mpc837xemds and mpc837xerdb.
2682 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
2683 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
2684 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
2686 Signed-off-by: Dave Liu <daveliu@freescale.com>
2687 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2689 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
2690 Author: Stefan Roese <sr@denx.de>
2691 Date: Fri Mar 28 14:09:04 2008 +0100
2693 ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
2695 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
2696 interface. This usage can be configured with the jumper J6. This patch
2697 displays the current configuration upon bootup and changes the PCIe
2698 init loop, to only initialize the availabel PCIe slots.
2700 Signed-off-by: Stefan Roese <sr@denx.de>
2702 commit 90447ecbbac8572457b6d8903073ac3f120995ba
2703 Author: Tor Krill <tor@excito.com>
2704 Date: Fri Mar 28 11:29:10 2008 +0100
2706 MTD/CFI: Add support for 16bit legacy AMD flash
2708 Add entry for 512Kx16 AMD flash to jedec_table.
2709 Read out 16bit device id if chipwidth is 16bit.
2710 Fixed coding style after Stefans feedback
2712 Signed-off-by: Tor Krill <tor@excito.com>
2714 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
2715 Author: Stefan Roese <sr@denx.de>
2716 Date: Fri Mar 28 11:02:53 2008 +0100
2718 ppc: Small change to CFG_MEM_TOP_HIDE description
2720 Signed-off-by: Stefan Roese <sr@denx.de>
2722 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
2723 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2724 Date: Thu Mar 27 15:44:12 2008 +0900
2726 sh: Add support stat structure and stat.h
2728 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2730 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
2731 Author: Mark Jonas <toertel@gmail.com>
2732 Date: Sat Mar 22 19:27:52 2008 +0100
2734 sh: Removed warning when compiling drivers/serial/serial_sh.c.
2736 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
2737 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2739 commit f309fa38929ffba71230c02330ffa42f4bba6333
2740 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2741 Date: Wed Mar 12 18:02:57 2008 +0900
2743 sh: Remove disable_ctrlc function from R7780MP
2745 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2747 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
2748 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2749 Date: Wed Mar 12 17:55:15 2008 +0900
2751 sh: Add maintainer of R7780MP to MAINTAINER file
2753 Update MAINTAINER entry for R7780MP. And fix maintainer's name.
2755 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2757 commit f5e2466f7baa887a7df0c536333eea8231333497
2758 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2759 Date: Tue Mar 25 17:11:24 2008 +0900
2761 sh: Add support Renesas Solutions R2D plus board
2763 R2D plus is SH reference board used with SH7751R.
2764 This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
2765 one PCI bus, VGA, and two Ethernet controller.
2767 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2769 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
2770 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2771 Date: Wed Mar 12 12:15:29 2008 +0900
2773 sh: Add support SH4 cache control
2775 Add support SH4 cache control and flash_cache function
2777 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2779 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
2780 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2781 Date: Mon Mar 24 01:53:01 2008 +0900
2783 sh: Add support PCI host driver for SH7751/SH7751R
2785 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2787 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
2788 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2789 Date: Mon Mar 24 02:11:26 2008 +0900
2791 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
2793 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2795 commit 566933278101c144d75361ea682678a326c1290d
2796 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2797 Date: Wed Mar 12 12:10:28 2008 +0900
2799 sh: Add support SuperH SH7751/SH7751R
2801 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2803 commit 3313e0e26224fc9a0c445124f3455058c696df84
2804 Author: Mark Jonas <toertel@gmail.com>
2805 Date: Mon Mar 10 11:37:10 2008 +0100
2807 sh: Added support for SH7720 based board MPR2.
2809 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
2810 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2812 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
2813 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2814 Date: Thu Mar 6 14:05:53 2008 +0900
2816 sh: Fix receive FIFO level register of SH4A
2818 Receive FIFO level register is different in SH4A.
2819 Because register is different, cannot occasionally receive data.
2821 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2823 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
2824 Author: Yusuke Goda <goda.yusuke@renesas.com>
2825 Date: Tue Mar 11 12:55:12 2008 +0900
2827 sh: Add support Renesas Solutions R7780MP
2829 Renesas Solutions R7780MP is a reference board on SH7780.
2830 This board has serial, 10/100 base Ethernet deivice, CF slot
2831 and VGA devices. This board can set extension board.
2832 Extension board has 10/100/1000 base Ethernet device, PCI slot,
2835 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
2836 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2838 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
2839 Author: Yusuke Goda <goda.yusuke@renesas.com>
2840 Date: Wed Mar 5 14:30:02 2008 +0900
2842 sh: Add support PCI of SuperH and SH7780
2844 This patch add support PCI of SuperH base code and SH7780 specific code.
2846 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
2847 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2849 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
2850 Author: Yusuke Goda <goda.yusuke@renesas.com>
2851 Date: Wed Mar 5 14:23:26 2008 +0900
2853 sh: Add support SH7780
2855 SH7780 is CPU of Renesas Technology.
2859 - DDR-SDRAM controller
2862 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
2863 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2865 commit c2042f5952a686c414031309b8f244513bf578f0
2866 Author: goda.yusuke <goda.yusuke@renesas.com>
2867 Date: Fri Jan 25 20:46:36 2008 +0900
2869 sh: Add support Renesas Solutions Migo-R board
2871 Migo-R is a board based on SH7722 and has may devices.
2872 In this patch, supported SCIF, NOR flash and Ethernet.
2874 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
2875 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2877 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
2878 Author: Bartlomiej Sieka <tur@semihalf.com>
2879 Date: Thu Mar 27 15:06:40 2008 +0100
2881 Fix host tool build breakage, take two
2883 Revert commit 87c8431f and fix build breakage so that the build continues
2884 to work on FC systems.
2886 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
2888 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
2889 Author: Stefan Roese <sr@denx.de>
2890 Date: Wed Mar 19 09:36:47 2008 +0100
2892 ppc4xx: Enable ECC on LWMON5
2894 Since all ECC related problems seem to be resolved on LWMON5, this patch
2895 now enables ECC support.
2897 We have to write the ECC bytes by zeroing and flushing in smaller
2898 steps, since the whole 256MByte takes too long for the external
2901 Signed-off-by: Stefan Roese <sr@denx.de>
2903 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
2904 Author: Larry Johnson <lrj@acm.org>
2905 Date: Mon Mar 17 11:10:35 2008 -0500
2907 ppc4xx: Updates to Korat-specific code
2909 This patch contains updates for changes for the Korat PPC440EPx board.
2910 These changes include:
2912 (1) Support for "permanent" and "upgradable" copies of U-Boot, as
2913 described in the new "doc/README.korat" file;
2915 (2) a new memory map for the registers in the board's CPLD;
2917 (3) a revised format for manufacturer's data in serial EEPROM; and
2919 (4) changes to track updates to U-Boot for the Sequoia board.
2921 Signed-off-by: Larry Johnson <lrj@acm.org>
2923 commit f766cdf89b3a2a7634b8c5869f606150e332036c
2924 Author: Markus Brunner <super.firetwister@gmail.com>
2925 Date: Thu Mar 27 10:46:25 2008 +0100
2927 ppc4xx: PPC405EP Set EMAC noise filter bits
2929 This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
2930 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
2931 disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
2933 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
2934 Signed-off-by: Stefan Roese <sr@denx.de>
2936 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
2937 Author: Mike Nuss <mike@terascala.com>
2938 Date: Wed Feb 20 11:54:20 2008 -0500
2940 ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
2942 On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
2943 after startup to change the speed of the clocks. This patch adds the
2944 option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
2945 initialization code will reconfigure the PLL to run the system with a CPU
2946 frequency of 667MHz and PLB frequency of 166MHz, without the need for an
2949 Signed-off-by: Mike Nuss <mike@terascala.com>
2950 Acked-by: Stefan Roese <sr@denx.de>
2952 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
2953 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2954 Date: Thu Mar 27 09:12:40 2008 +0100
2956 new-image: Fix host tool build breakage
2958 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2960 commit 6fb4b640562a10daff0dbe537638d511b5b48650
2961 Author: Stefan Roese <sr@denx.de>
2962 Date: Thu Mar 27 10:24:03 2008 +0100
2964 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
2966 Signed-off-by: Stefan Roese <sr@denx.de>
2968 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
2969 Author: Stefan Roese <sr@denx.de>
2970 Date: Wed Mar 19 10:23:43 2008 +0100
2972 ppc4xx: Add fdt support to Prodrive alpr
2974 Since this board will probably be ported to arch/powerpc in the
2975 near future, we add device tree support now. This way we are
2976 "ready" for arch/powerpc from now on.
2978 Signed-off-by: Stefan Roese <sr@denx.de>
2980 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
2981 Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
2982 Date: Mon Mar 17 09:27:56 2008 +0100
2984 ppc4xx: Enable cache support on the ALPR board
2986 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
2988 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
2989 Author: Stefan Roese <sr@denx.de>
2990 Date: Wed Mar 26 10:14:11 2008 +0100
2992 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
2994 If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
2995 memory area will get subtracted from the top (end) of ram and won't get
2996 "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
2997 should gets passed the now "corrected" memory size and won't touch it
2998 either. This should work for arch/ppc and arch/powerpc. Only Linux board
2999 ports in arch/powerpc with bootwrapper support, which recalculate the
3000 memory size from the SDRAM controller setup, will have to get fixed
3001 in Linux additionally.
3003 This patch enables this config option on some PPC440EPx boards as a workaround
3004 for the CHIP 11 errata. Here the description from the AMCC documentation:
3006 CHIP_11: End of memory range area restricted access.
3010 The 440EPx DDR controller does not acknowledge any
3011 transaction which is determined to be crossing over the
3012 end-of-memory-range boundary, even if the starting address is
3013 within valid memory space. Any such transaction from any PLB4
3014 master will result in a PLB time-out on PLB4 bus.
3017 In case of such misaligned bursts, PLB4 masters will not
3018 retrieve any data at all, just the available data up to the
3019 end of memory, especially the 440 CPU. For example, if a CPU
3020 instruction required an operand located in memory within the
3021 last 7 words of memory, the DCU master would burst read 8
3022 words to update the data cache and cross over the
3023 end-of-memory-range boundary. Such a DCU read would not be
3024 answered by the DDR controller, resulting in a PLB4 time-out
3025 and ultimately in a Machine Check interrupt. The data would
3026 be inaccessible to the CPU.
3029 Forbid any application to access the last 256 bytes of DDR
3030 memory. For example, make your operating system believe that
3031 the last 256 bytes of DDR memory are absent. AMCC has a patch
3032 that does this, available for Linux.
3034 This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
3035 lwmon5, korat, sequoia
3037 The other remaining 440EPx board were intentionally not included
3038 since it is not clear to me, if they use the end of ram for some
3039 other purpose. This is unclear, since these boards have CONFIG_PRAM
3040 defined and even comments like this:
3043 /* esd expects pram at end of physical memory.
3044 * So no logbuffer at the moment.
3047 It is strongly recommended to not use the last 256 bytes on those
3048 boards too. Patches from the board maintainers are welcome.
3050 Signed-off-by: Stefan Roese <sr@denx.de>
3052 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
3053 Author: Stefan Roese <sr@denx.de>
3054 Date: Thu Mar 27 10:09:05 2008 +0100
3056 ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
3058 Signed-off-by: Stefan Roese <sr@denx.de>
3060 commit d56a3ce179688cde61073a3690e21703d68fafd7
3061 Author: Stefan Roese <sr@denx.de>
3062 Date: Tue Mar 25 17:51:13 2008 +0100
3064 ppc4xx: Correctly pass phyiscal FLASH base address into dtb
3066 The routine ft_board_setup() configures the EBC NOR mappings for the
3067 Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
3068 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
3069 problem, we need to pass the corrected address here too.
3071 Signed-off-by: Stefan Roese <sr@denx.de>
3073 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
3074 Author: Stefan Roese <sr@denx.de>
3075 Date: Wed Mar 19 16:35:12 2008 +0100
3077 ppc4xx: Fix compilation warning in 4xx_enet.c
3079 Signed-off-by: Stefan Roese <sr@denx.de>
3081 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
3082 Author: Stefan Roese <sr@denx.de>
3083 Date: Wed Mar 19 16:20:49 2008 +0100
3085 ppc4xx: Add AMCC Glacier 406GT eval board support
3087 This patch adds support for the AMCC Glacier 460GT eval board.
3088 The main difference to the Canyonlands board are listed here:
3090 - 4 ethernet ports instead of 2
3094 Currently EMAC2+3 are not working. This will be fixed in a later
3097 Signed-off-by: Stefan Roese <sr@denx.de>
3099 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
3100 Author: Stefan Roese <sr@denx.de>
3101 Date: Thu Mar 27 08:47:26 2008 +0100
3103 ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
3105 Signed-off-by: Stefan Roese <sr@denx.de>
3107 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
3108 Author: Anatolij Gustschin <agust@denx.de>
3109 Date: Wed Mar 26 21:05:43 2008 +0100
3111 Fix out of tree building issue
3113 Currently U-Boot building in some external directory
3114 doesn't work. This patch tries to fix the problem.
3116 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3118 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
3119 Author: Anatolij Gustschin <agust@denx.de>
3120 Date: Wed Mar 26 18:13:33 2008 +0100
3122 README: update documentation (availability, links, etc.)
3126 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3128 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
3129 Author: Anatolij Gustschin <agust@denx.de>
3130 Date: Wed Mar 26 17:47:44 2008 +0100
3132 Fix compilation error in cmd_usb.c
3134 This patch fixes compilation error
3135 cmd_usb.c: In function 'do_usb':
3136 cmd_usb.c:552: error: void value not ignored as it ought to be
3138 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3140 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
3141 Author: Timur Tabi <timur@freescale.com>
3142 Date: Fri Mar 14 17:45:29 2008 -0500
3144 Add support for setting the I2C bus speed in fsl_i2c.c
3146 Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
3147 the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
3148 but fsl_i2c.c ignores it and uses conservative value when programming the
3151 Signed-off-by: Timur Tabi <timur@freescale.com>
3152 Acked-by: Andy Fleming <afleming@freescale.com>
3154 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
3155 Author: Wolfgang Denk <wd@denx.de>
3156 Date: Thu Mar 27 00:03:57 2008 +0100
3158 Coding style cleanup, update CHANGELOG
3160 Signed-off-by: Wolfgang Denk <wd@denx.de>
3162 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
3163 Author: Dave Liu <r63238@freescale.com>
3164 Date: Wed Mar 26 22:55:32 2008 +0800
3166 drivers: add the support for Freescale SATA controller
3168 Add the Freescale on-chip SATA controller driver to u-boot,
3169 The SATA controller is used on the 837x and 8315 targets,
3170 The driver can be used to load kernel, fs and dtb.
3173 - 1.5/3 Gbps link speed
3174 - LBA48, LBA28 support
3175 - DMA and FPDMA support
3178 Signed-off-by: Dave Liu <daveliu@freescale.com>
3180 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
3181 Author: Dave Liu <r63238@freescale.com>
3182 Date: Wed Mar 26 22:54:44 2008 +0800
3184 ata: add the readme for SATA command line
3186 Signed-off-by: Dave Liu <daveliu@freescale.com>
3188 commit cd54081cd479e542fc399b8a40651ff11a1ad849
3189 Author: Dave Liu <r63238@freescale.com>
3190 Date: Wed Mar 26 22:53:24 2008 +0800
3192 ata: enable the sata initialize on boot up
3194 Signed-off-by: Dave Liu <daveliu@freescale.com>
3196 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
3197 Author: Dave Liu <r63238@freescale.com>
3198 Date: Wed Mar 26 22:52:36 2008 +0800
3200 ata: add the fis struct for SATA
3202 Signed-off-by: Dave Liu <daveliu@freescale.com>
3204 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
3205 Author: Dave Liu <r63238@freescale.com>
3206 Date: Wed Mar 26 22:51:44 2008 +0800
3208 ata: add the libata support
3210 add simple libata support in u-boot
3212 Signed-off-by: Dave Liu <daveliu@freescale.com>
3214 commit 8e9bb43429e50df55fa41932cbe65841ff579220
3215 Author: Dave Liu <r63238@freescale.com>
3216 Date: Wed Mar 26 22:50:45 2008 +0800
3218 ata: make the ata_piix driver using new SATA framework
3220 original ata_piix driver is using IDE framework, not real
3221 SATA framework. For now, the ata_piix driver is only used
3222 by x86 sc520_cdp board. This patch makes the ata_piix driver
3223 use the new SATA framework, so
3225 - remove the duplicated command stuff
3226 - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
3227 - add the CONFIG_CMD_SATA define to sc520_cdp.h
3229 Signed-off-by: Dave Liu <daveliu@freescale.com>
3231 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
3232 Author: Dave Liu <r63238@freescale.com>
3233 Date: Wed Mar 26 22:49:44 2008 +0800
3235 ata: add the support for SATA framework
3237 - add the SATA framework
3238 - add the SATA command line
3240 Signed-off-by: Dave Liu <daveliu@freescale.com>
3242 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
3243 Author: Dave Liu <r63238@freescale.com>
3244 Date: Wed Mar 26 22:48:18 2008 +0800
3246 ata: merge the header of ata_piix driver
3248 move the sata.h from include/ to drivers/block/ata_piix.h
3250 Signed-off-by: Dave Liu <daveliu@freescale.com>
3252 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
3253 Author: Dave Liu <r63238@freescale.com>
3254 Date: Wed Mar 26 22:47:06 2008 +0800
3256 ata: merge the ata_piix driver
3258 move the cmd_sata.c from common/ to drivers/ata_piix.c,
3259 the cmd_sata.c have some part of ata_piix controller drivers.
3260 consolidate the driver to have better framework.
3262 Signed-off-by: Dave Liu <daveliu@freescale.com>
3264 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
3265 Author: Markus Klotzbuecher <mk@denx.de>
3266 Date: Wed Mar 26 18:26:43 2008 +0100
3268 USB, Storage: fix a bug introduced in commit
3269 f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
3270 to only print only information on one storage device, but not for
3273 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
3275 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
3276 Author: Anatolij Gustschin <agust@denx.de>
3277 Date: Wed Mar 26 17:47:44 2008 +0100
3279 Fix compilation error in cmd_usb.c
3281 This patch fixes compilation error
3282 cmd_usb.c: In function 'do_usb':
3283 cmd_usb.c:552: error: void value not ignored as it ought to be
3285 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3286 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
3288 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
3289 Author: Kumar Gala <galak@kernel.crashing.org>
3290 Date: Wed Mar 26 08:53:53 2008 -0500
3292 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
3294 Provide a board_lmb_reserve helper function to ensure we reserve
3295 the page of memory we are using for the boot page translation code.
3297 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3299 commit 79679d80021ab095e639e250ca472fe526da02e2
3300 Author: Kumar Gala <galak@kernel.crashing.org>
3301 Date: Wed Mar 26 08:34:25 2008 -0500
3303 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
3305 The following changes are needed to be inline with ePAPR v0.81:
3307 * r4, r5 and now always set to 0 on boot release
3308 * r7 is used to pass the size of the initial map area (IMA)
3309 * EPAPR_MAGIC value changed for book-e processors
3310 * changes in the spin table layout
3311 * spin table supports a 64-bit physical release address
3313 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3315 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
3316 Author: Jon Loeliger <jdl@freescale.com>
3317 Date: Wed Mar 19 15:02:07 2008 -0500
3319 FSL: Clean up board/freescale/common/Makefile
3321 Each file that can be built here now follows some
3322 CONFIG_ option so that they are appropriately built
3323 or not, as needed. And CONFIG_ defines were added
3324 to various board config files to make sure that happens.
3326 The other board/freescale/*/Makefiles no longer need
3327 to reach up and over into ../common to build their
3328 individually needed files any more.
3330 Boards that are CDS specific were renamed with cds_ prefix.
3332 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3334 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
3335 Author: Kumar Gala <galak@kernel.crashing.org>
3336 Date: Wed Feb 27 22:00:27 2008 -0600
3338 85xx: Fix merge duplication
3340 ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
3342 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3344 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
3345 Author: James Yang <James.Yang@freescale.com>
3346 Date: Tue Feb 12 16:35:07 2008 -0600
3348 85xx: Expand CCSR space with more DDR controller registers.
3350 Signed-off-by: James Yang <James.Yang@freescale.com>
3351 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3352 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3354 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
3355 Author: James Yang <James.Yang@freescale.com>
3356 Date: Fri Feb 8 18:05:08 2008 -0600
3358 85xx: Speed up get_ddr_freq() and get_bus_freq()
3360 get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
3361 called. However, get_sys_info() recalculates extraneous information when
3362 called each time. Have get_ddr_freq() and get_bus_freq() return memoized
3363 values from global_data instead.
3365 Signed-off-by: James Yang <James.Yang@freescale.com>
3366 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3368 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
3369 Author: James Yang <James.Yang@freescale.com>
3370 Date: Fri Feb 8 16:46:27 2008 -0600
3372 85xx: Show DDR memory data rate in addition to the memory clock frequency.
3374 Show the DDR memory data rate in addition to the memory clock
3375 frequency. For DDR/DDR2 memories the memory data rate is 2x the
3378 Signed-off-by: James Yang <James.Yang@freescale.com>
3379 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3381 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
3382 Author: James Yang <James.Yang@freescale.com>
3383 Date: Fri Feb 8 16:44:53 2008 -0600
3385 85xx: get_tbclk() speed up and rounding fix
3387 Speed up get_tbclk() by referencing pre-computed bus clock
3388 frequency value from global data instead of sys_info_t. Fix
3389 rounding of result to nearest; previously it was rounding
3392 Signed-off-by: James Yang <James.Yang@freescale.com>
3393 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3395 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
3396 Author: Andy Fleming <afleming@freescale.com>
3397 Date: Wed Feb 6 01:19:40 2008 -0600
3399 Update SVR numbers to expand support
3401 FSL has taken to using SVR[16:23] as an SOC sub-version field. This
3402 is used to distinguish certain variants within an SOC family. To
3403 account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
3404 constants to reflect the larger value. We also add SVR numbers for all
3405 of the current variants. Finally, to make things neater, rather than
3406 use an enormous switch statement to print out the CPU type, we create
3407 and array of SVR/name pairs (using a macro), and print out the CPU name
3408 that matches the SVR SOC version.
3410 Signed-off-by: Andy Fleming <afleming@freescale.com>
3412 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
3413 Author: Andy Fleming <afleming@freescale.com>
3414 Date: Wed Feb 6 01:12:57 2008 -0600
3416 Add the Freescale PCI device IDs
3418 Signed-off-by: Andy Fleming <afleming@freescale.com>
3420 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
3421 Author: Kumar Gala <galak@kernel.crashing.org>
3422 Date: Thu Feb 14 11:04:23 2008 -0600
3424 85xx: Added support for multicore boot mechanism
3426 Added the cpu command that provides a generic mechanism to get status,
3427 reset, and release secondary cores in multicore processors.
3429 Added support for using the ePAPR defined spin-table mechanism on 85xx.
3431 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3432 Signed-off-by: Andy Fleming <afleming@freescale.com>
3434 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
3435 Author: Kumar Gala <galak@kernel.crashing.org>
3436 Date: Thu Jan 17 16:48:33 2008 -0600
3438 85xx: Added support for multicore boot mechanism
3440 Added the cpu command that provides a generic mechanism to get status,
3441 reset, and release secondary cores in multicore processors.
3443 Added support for using the ePAPR defined spin-table mechanism on 85xx.
3445 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3447 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
3448 Author: Kumar Gala <galak@kernel.crashing.org>
3449 Date: Wed Jan 30 14:55:14 2008 -0600
3451 85xx: Add the concept of CFG_CCSRBAR_PHYS
3453 When we go to 36-bit physical addresses we need to keep the concept of
3454 the physical CCSRBAR address seperate from the virtual one.
3456 For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
3458 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3460 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
3461 Author: Wolfgang Denk <wd@denx.de>
3462 Date: Wed Mar 26 15:38:47 2008 +0100
3464 Coding style cleanup.
3466 Signed-off-by: Wolfgang Denk <wd@denx.de>
3468 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
3469 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
3470 Date: Wed Mar 26 13:02:13 2008 +0100
3472 Add CFG_RTC_DS1337_NOOSC to turn off OSC output
3474 The default settings for RTC DS1337 keeps the OSC
3475 output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
3478 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
3480 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
3481 Author: Wolfgang Denk <wd@denx.de>
3482 Date: Wed Mar 26 11:48:46 2008 +0100
3484 Cleanup coding style, update CHANGELOG
3486 Signed-off-by: Wolfgang Denk <wd@denx.de>
3488 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
3489 Author: Wolfgang Denk <wd@denx.de>
3490 Date: Wed Mar 26 10:40:12 2008 +0100
3492 README: update documentation (availability, links, etc.)
3494 Signed-off-by: Wolfgang Denk <wd@denx.de>
3496 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
3497 Author: Aras Vaichas <arasv@magtech.com.au>
3498 Date: Tue Mar 25 12:09:07 2008 +1100
3500 USB Storage, add meaningful return value
3502 This patch changes the "usb storage" command to return success if it
3503 finds a USB storage device, otherwise it returns error.
3505 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
3507 commit 18e69a35efbb078403db0c0063986470dad7d082
3508 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3509 Date: Fri Mar 14 23:20:18 2008 +0300
3511 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
3513 Linux understands "host" (default), "peripheral" and "otg" (broken).
3514 Though, U-Boot doesn't restrict dr_mode variable to these values (think
3515 of renames in future).
3517 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3518 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3520 commit c7604783b236e368f225efb7b3efb418fe20b404
3521 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3522 Date: Fri Mar 14 23:20:30 2008 +0300
3524 tsec: fix link detection for the RTL8211B PHY
3526 RTL8211B sets link state register after autonegotiation complete,
3527 so with bootdelay=0 RTL8211B will report lack of the link.
3529 To fix this, we should wait for aneg to complete, even if the
3530 link is currently down.
3532 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3533 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3535 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
3536 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3537 Date: Mon Mar 24 20:47:09 2008 +0300
3539 mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
3541 device_type = "soc" is being deprecated, newer device trees will use
3542 "fsl,soc" and/or "fsl,immr" for the soc nodes.
3544 This patch also adds clock-frequency property for soc nodes (the same
3545 value as bus-frequency).
3547 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3549 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
3550 Author: Joe D'Abbraccio <ljd015@freescale.com>
3551 Date: Mon Mar 24 13:00:59 2008 -0400
3553 Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
3555 With the original value of 1/2 clock cycle delay, the system ran relatively
3556 stable except when we run benchmarks that are intensive users of memory.
3557 When I run samba connected disk with a HDBENCH test, the system locks-up
3558 or reboots sporadically.
3560 Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
3562 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
3563 Author: Scott Wood <scottwood@freescale.com>
3564 Date: Mon Mar 24 12:44:13 2008 -0500
3566 mpc83xx: Set PCI I/O bus-address base to zero.
3568 The device trees for these boards describe PCI I/O as starting from
3569 address zero from the device's perspective.
3571 Placing I/O elsewhere may cause problems with certain PCI boards, and may
3572 cause problems with Linux.
3574 Signed-off-by: Scott Wood <scottwood@freescale.com>
3576 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
3577 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3578 Date: Mon Mar 24 20:47:05 2008 +0300
3580 mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
3582 At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
3583 This patch fixes "system time drifting" problem.
3585 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3587 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
3588 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3589 Date: Mon Mar 24 20:47:02 2008 +0300
3591 mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
3593 This is needed to update /choosen/linux,stdout-path properly.
3595 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3597 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
3598 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3599 Date: Mon Mar 24 20:47:00 2008 +0300
3601 mpc83xx: MPC8360E-RDK: add dhcp command
3603 Plus modify environment to use it and remove bootfile env variable,
3604 it is internal and CONFIG_BOOTFILE is used for these purposes.
3606 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3608 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
3609 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3610 Date: Mon Mar 24 20:46:57 2008 +0300
3612 mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
3614 Current DDR setup easily causes memory corruption, this patch fixes it.
3616 Also fix TIMING_CFG0_MRS_CYC definition.
3618 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3620 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
3621 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3622 Date: Mon Mar 24 20:46:53 2008 +0300
3624 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
3626 This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
3627 controller and FHCI (QE USB).
3629 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3631 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
3632 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3633 Date: Mon Mar 24 20:46:51 2008 +0300
3635 mpc83xx: MPC8360E-RDK: add support for NAND
3637 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3639 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
3640 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3641 Date: Mon Mar 24 20:46:46 2008 +0300
3643 mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
3645 This is needed for BCM PHYs to work on this board.
3647 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3649 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
3650 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3651 Date: Mon Mar 24 20:46:34 2008 +0300
3653 uec: add support for Broadcom BCM5481 Gigabit PHY
3655 This patch adds basic support for Broadcom BCM5481 PHY.
3657 RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
3658 Peter Barada <peterb@logicpd.com>.
3660 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3662 commit 6a600c3a1876bc203445df4f0fd6b12648259666
3663 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3664 Date: Mon Mar 24 20:46:28 2008 +0300
3666 uec: add support for RGMII_RXID interface mode
3668 PHY drivers will use it to setup software delay between RXD and RXC
3671 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3673 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
3674 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3675 Date: Mon Mar 24 20:46:24 2008 +0300
3677 uec: add support for gbit mii status readings
3679 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3681 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
3682 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3683 Date: Mon Mar 24 17:40:47 2008 +0300
3685 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
3687 This is primarily for the early console support.
3689 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3691 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
3692 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3693 Date: Mon Mar 24 17:40:43 2008 +0300
3695 83xx: initialize serdes for MPC837XRDB boards
3697 On the MPC8377ERDB: 2 SATA and 2 PCI-E.
3698 On the MPC8378ERDB: 2 PCI-E
3699 On the MPC8379ERDB: 4 SATA
3701 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3703 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
3704 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3705 Date: Mon Mar 24 17:40:32 2008 +0300
3707 83xx: serdes setup routines
3709 This patch adds few routines to configure serdes on 837x targets.
3711 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3713 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
3714 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3715 Date: Mon Mar 24 17:40:27 2008 +0300
3717 83xx: split COBJS onto separate lines
3719 ..plus get rid of some #ifdefs in the .c files.
3721 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3723 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
3724 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
3725 Date: Mon Mar 24 17:40:23 2008 +0300
3727 83xx: nand support for MPC837XRDB boards
3729 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
3731 commit 82e45a204190593e8613145a928f998fb8c909c4
3732 Author: Jerry Van Baren <gvb.uboot@gmail.com>
3733 Date: Tue Mar 18 21:44:41 2008 -0400
3735 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
3737 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3738 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3740 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
3741 Author: Michael Barkowski <michael.barkowski@freescale.com>
3742 Date: Thu Mar 20 13:15:39 2008 -0400
3744 mpc8323erdb: remove RTC and add EEPROM
3746 There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
3748 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
3749 Acked-by: Kim Phillips <kim.phillips@freescale.com>
3751 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
3752 Author: Michael Barkowski <michael.barkowski@freescale.com>
3753 Date: Thu Mar 20 13:15:34 2008 -0400
3755 mpc8323erdb: Improve the system performance
3757 The following changes are based on kernel UCC ethernet performance:
3759 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
3760 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
3761 switch to enable this setting.
3763 The following changes are based on the App Note AN3369 and
3764 verified to improve memory latency using LMbench:
3766 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
3767 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
3769 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
3770 Twr=15ns, and this was already the setting in DDR_MODE)
3771 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
3773 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
3775 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
3777 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
3779 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
3781 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
3784 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
3785 Acked-by: Kim Phillips <kim.phillips@freescale.com>
3787 commit fc549c871f43933396a5b3e21d897023d4b31b8d
3788 Author: Michael Barkowski <michael.barkowski@freescale.com>
3789 Date: Thu Mar 20 13:15:28 2008 -0400
3791 mpc8323erdb: use readable DDR config macros
3793 Use available shift/mask macros to define DDR configuration.
3795 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
3796 Acked-by: Kim Phillips <kim.phillips@freescale.com>
3798 commit 89c7784ed90ba50301eec521144f95111e472906
3799 Author: Timur Tabi <timur@freescale.com>
3800 Date: Fri Feb 8 13:15:55 2008 -0600
3802 83xx: Add Vitesse VSC7385 firmware uploading
3804 Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
3805 the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
3806 Cleaned up the board header files to make selecting the VSC7385 easier to
3809 Signed-off-by: Timur Tabi <timur@freescale.com>
3810 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3812 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
3813 Author: Timur Tabi <timur@freescale.com>
3814 Date: Fri Feb 8 13:15:54 2008 -0600
3816 NET: Add Vitesse VSC7385 firmware uploading
3818 The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
3819 and other boards. A small firwmare must be uploaded to its on-board memory
3820 before it can be enabled. This patch adds the code which uploads firmware
3821 (but not the firmware itself).
3823 Previously, this feature was provided by a U-Boot application that was
3824 made available only on Freescale BSPs. The VSC7385 firmware must still
3825 be obtained separately, but at least there is no longer a need for a separate
3828 Signed-off-by: Timur Tabi <timur@freescale.com>
3829 Acked-by: Ben Warren <biggerbadderben@gmail.com>
3831 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
3832 Author: Wolfgang Denk <wd@denx.de>
3833 Date: Wed Mar 26 00:52:10 2008 +0100
3835 Coding Style cleanyp; update CHANGELOG
3837 Signed-off-by: Wolfgang Denk <wd@denx.de>
3839 commit 43ddd9c820fec44816188f53346b464e20b3142d
3840 Author: Jerry Van Baren <gvb.uboot@gmail.com>
3841 Date: Sat Mar 22 14:23:49 2008 -0400
3843 Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
3845 These defines embedded the u-boot env variables and/or the bd_t structure
3846 in the fdt blob. The conclusion of discussion on the u-boot email list
3847 was that embedding these in the fdt blob is not useful: there are better
3848 ways of passing the data (in fact, the fdt blob itself replaces the
3851 The only board that enables these is the stxxtc and they don't appear
3852 to be used by linux.
3854 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
3855 Acked-by: Kim Phillips <kim.phillips@freescale.com>
3857 commit 22ed2285743359fd1fe73e411dff914b2256e68f
3858 Author: Stefan Roese <sr@denx.de>
3859 Date: Mon Mar 17 10:49:25 2008 +0100
3861 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
3863 Signed-off-by: Stefan Roese <sr@denx.de>
3865 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
3866 Author: Kyungmin Park <kmpark@infradead.org>
3867 Date: Mon Mar 17 08:54:06 2008 +0900
3869 Add Flex-OneNAND booting support
3871 Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
3872 using a NOR Flash interface. This on-chip integration enables system designers
3873 to reduce external system logic and use high-density NAND Flash
3874 in applications that would otherwise have to use more NOR components.
3876 Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
3877 in more flexible way. While MLC area of Flex-OneNAND can be used to store data
3878 that require low reliability and high density, SLC area of Flex-OneNAND
3879 to store data that need high reliability and high performance. Flex-OneNAND
3880 can let users take advantage of storing these two different types of data
3881 into one chip, which is making Flex-OneNAND more cost- and space-effective.
3883 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
3885 commit c512389cc4a10253249271ff6c887c6dab1f0db2
3886 Author: André Schwarz <andre.schwarz@matrix-vision.de>
3887 Date: Thu Mar 13 13:50:52 2008 +0100
3889 MPC5200: support setup without FEC
3891 Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
3892 defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
3894 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
3895 Acked-by: Grant Likely <grant.likely@secretlab.ca>
3897 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
3898 Author: Jon Loeliger <jdl@freescale.com>
3899 Date: Wed Mar 5 18:05:46 2008 -0600
3901 FSL: Move board/mpc8266ads under board/freescale
3903 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3905 commit 7f1d846e5c5754449c286587d099d85246062772
3906 Author: Jon Loeliger <jdl@freescale.com>
3907 Date: Wed Mar 5 18:05:47 2008 -0600
3909 FSL: Move board/mpc7448hpc2 under board/freescale
3911 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3913 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
3914 Author: Jon Loeliger <jdl@freescale.com>
3915 Date: Wed Mar 5 18:05:45 2008 -0600
3917 FSL: Move board/mpc8260ads under board/freescale
3919 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3921 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
3922 Author: goda.yusuke <goda.yusuke@renesas.com>
3923 Date: Wed Mar 5 17:08:33 2008 +0900
3925 net: Add support AX88796L ethernet device
3927 AX88796L is device of NE2000 compatible.
3928 This patch support AX88796L ethernet device.
3930 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
3931 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3933 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
3934 Author: Wolfgang Denk <wd@denx.de>
3935 Date: Tue Mar 25 22:50:41 2008 +0100
3937 ne2000 driver: change #ifdef to Makefile conditional compilation
3939 Signed-off-by: Wolfgang Denk <wd@denx.de>
3941 commit e710185aae90c64d39c2d453e40e58ceefe4f250
3942 Author: goda.yusuke <goda.yusuke@renesas.com>
3943 Date: Wed Mar 5 17:08:20 2008 +0900
3945 net: Divided code of NE2000 ethernet driver
3947 There are more devices of the NE2000 base.
3948 A present code is difficult for us to support more devices.
3949 To support more NE2000 clone devices, separated the function.
3951 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
3952 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3954 commit 395bce4f59a507a60a475f7ee46bed47de9482df
3955 Author: Mike Frysinger <vapier@gentoo.org>
3956 Date: Sun Feb 24 23:58:13 2008 -0500
3958 net/Blackfin: move on-chip MAC driver into drivers/net/
3960 The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
3961 directory, but it is not board specific, so relocate it to the drivers dir
3962 so that other Blackfin ports can utilize it.
3964 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3966 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
3967 Author: Mike Frysinger <vapier@gentoo.org>
3968 Date: Sun Feb 24 23:52:35 2008 -0500
3970 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
3972 Since the "ssync" instruction may have hardware anomalies associated with
3973 it, have the smc91111 driver use the SSYNC macro rather than invoking it
3974 directly. We workaround all the anomalies via this macro.
3976 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3978 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
3979 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
3980 Date: Sun Feb 17 22:57:47 2008 +0000
3982 8xx: Update OF support on 8xx
3984 This patch does some shifting around of OF support on 8xx.
3986 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
3988 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
3989 Author: Kumar Gala <galak@kernel.crashing.org>
3990 Date: Fri Feb 15 15:16:18 2008 -0600
3992 ppc: Allow boards to specify how much memory they can map
3994 For historical reasons we limited the stack to 256M because some boards
3995 could only map that much via BATS. However newer boards are capable of
3996 mapping more memory (for example 85xx is capble of doing up to 2G).
3998 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4000 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
4001 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
4002 Date: Fri Feb 15 01:05:58 2008 +0000
4004 8xx : Add OF support to Adder875 board port - resubmit
4006 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
4008 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
4009 Author: Kumar Gala <galak@kernel.crashing.org>
4010 Date: Thu Feb 14 20:44:42 2008 -0600
4014 Add a simple expr style command that will set an env variable as the result
4015 of the command. This allows us to do simple math in shell. The following
4016 operations are supported: &, |, ^, +, -, *, /.
4018 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4020 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
4021 Author: Jon Loeliger <jdl@freescale.com>
4022 Date: Wed Mar 5 17:27:48 2008 -0600
4024 FSL: Move board/mpc7448hpc2 under board/freescale
4026 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4028 commit 449c703374a8868453425e15da7e2f76221b72e4
4029 Author: Jon Loeliger <jdl@freescale.com>
4030 Date: Wed Mar 5 17:21:43 2008 -0600
4032 FSL: Move board/mpc8266ads under board/freescale
4034 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4036 commit 5863577989ad689427bb750107e9a75f1c1645d2
4037 Author: Jon Loeliger <jdl@freescale.com>
4038 Date: Wed Mar 5 16:41:41 2008 -0600
4040 FSL: Move board/mpc8260ads under board/freescale
4042 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4044 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
4045 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4046 Date: Tue Mar 25 21:30:08 2008 +0900
4048 [MIPS] Move gth2_config from ARM section to MIPS
4050 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4052 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
4053 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4054 Date: Tue Mar 25 21:30:07 2008 +0900
4056 [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
4058 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4060 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
4061 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4062 Date: Tue Mar 25 21:30:07 2008 +0900
4064 [MIPS] Fix dcache_status()
4066 You can't judge UNCACHED by Config.K0 LSB.
4068 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4070 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
4071 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4072 Date: Tue Mar 25 21:30:07 2008 +0900
4074 [MIPS] Introduce _machine_restart
4076 Handles machine specific functions by using weak functions.
4078 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4080 commit decaba6f5cf386d569ac3997bebb871b966c6b18
4081 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4082 Date: Tue Mar 25 21:30:07 2008 +0900
4084 [MIPS] Cleanup CP0 Status initialization
4086 Add setup_c0_status from Linux. For the moment we disable interrupts, set
4087 CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
4088 reset-time configuration and will work well across most processors.
4090 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4092 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
4093 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4094 Date: Tue Mar 25 21:30:07 2008 +0900
4096 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
4098 Without this change, we'll be suffering from deffered WATCH exception
4099 once Status.EXL is cleared. Make sure Cause.WP is cleared.
4101 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4103 commit 26138623230ca2bad3c78e05a65527ea70c8b688
4104 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4105 Date: Tue Mar 25 21:30:07 2008 +0900
4107 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
4109 Move things to appropriate place.
4111 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4113 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
4114 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4115 Date: Tue Mar 25 21:30:06 2008 +0900
4117 [MIPS] Implement flush_cache()
4119 We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
4120 don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
4121 function is used not only in U-Boot specfic programs but also at loading
4124 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4126 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
4127 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4128 Date: Tue Mar 25 21:30:06 2008 +0900
4130 [MIPS] Fix I-/D-cache initialization loops
4132 Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
4133 again per a loop for I-cache initialization. But according to 'See MIPS
4134 Run', we're encouraged to use three separate loops rather than combining
4135 them *for both I- and D-cache*. This patch tries to fix this.
4137 In accordance with fixing above, mips_init_[id]cache are separated from
4138 mips_cache_reset(), and rewrite cache loops are completely rewritten with
4141 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4143 commit 1898840797c7f50799377bd5b285a8a93a82c419
4144 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4145 Date: Tue Mar 25 21:30:06 2008 +0900
4147 [MIPS] Replace memory clearance code with f_fill64
4149 This routine fills memory with zero by 64 bytes, and is 64-bit capable.
4151 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4153 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
4154 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4155 Date: Tue Mar 25 21:30:06 2008 +0900
4157 [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
4159 This patch replaces the current function definitions with NESTED, LEAF
4160 and END macro. They specify some more additional information about the
4161 function; an alignment of symbol, type of symbol, stack frame usage, etc.
4162 These information explicitly tells the assembler and the debugger about
4163 the types of code we want to generate.
4165 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4167 commit 282223a607c611425fa33f5428f8eae6636972bb
4168 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4169 Date: Tue Mar 25 11:43:17 2008 +0900
4171 [MIPS] asm headers' updates
4173 Make some asm headers adjusted to the latest Linux kernel.
4175 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4177 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
4178 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4179 Date: Tue Mar 25 11:39:29 2008 +0900
4181 [MIPS] Request for the 'mips_cache_lock()' removal
4183 The initial intension of having mips_cache_lock() was to use the cache
4184 as memory for temporary stack use so that a C environment can be set up
4185 as early as possible.
4187 But now mips_cache_lock() follow lowlevel_init(). We've already have the
4188 real memory initilaized at this point, therefore we could/should use it.
4189 No reason to lock at all.
4193 Cache locking is not consistent across MIPS implementaions. Some imple-
4194 mentations don't support locking at all. The style of locking varies -
4195 some support per line locking, others per way, etc. Some parts use bits
4196 in status registers instead of cache ops. Current mips_cache_lock() is
4197 not necessarily general-purpose.
4199 And this is worthy of special mention; once U-Boot/MIPS locks the lines,
4200 they are never get unlocked, so the code relies on whatever gets loaded
4201 after U-Boot to re-initialize the cache and clear the locks. We're sup-
4202 posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
4203 but leave the situation as it is for a long time.
4205 For these reasons, I proposed the removal of mips_cache_lock() from the
4206 global start-up code.
4208 This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
4209 *things have changed*. If he wants the same behavior as before, he needs
4210 to have CFG_INIT_RAM_LOCK_MIPS in his config file.
4212 If we don't have any regression report through several releases, then
4213 we'll remove codes entirely.
4215 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4216 Acked-by: Andrew Dyer <amdyer@gmail.com>
4218 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
4219 Author: Yuri Tikhonov <yur@emcraft.com>
4220 Date: Mon Mar 24 11:30:54 2008 +0100
4222 lwmon5 SYSMON POST: fix backlight control
4224 If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
4225 run on the board, then the SYSMON POST controls the display backlight
4226 (doesn't switch backlight ON if POST FAILED, and does switch the
4227 backlight ON if PASSED).
4229 If not, then the video driver controls the display backlight (just
4230 switch ON the backlight upon initialization).
4232 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4234 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
4235 Author: Yuri Tikhonov <yur@emcraft.com>
4236 Date: Mon Mar 24 11:29:14 2008 +0100
4238 lwmon5 SYSMON POST: fix handling of negative temperatures
4240 Fix errors in the LWMON5 Sysmon POST for negative temperatures.
4242 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4244 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
4245 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4246 Date: Fri Mar 7 16:04:25 2008 +0900
4248 pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
4250 In current source code, when the device number of PCI is 0, process PCI
4251 bridge without fail. However, when the device number is 0, it is not PCI
4252 always bridge. There are times when device of PCI allocates.
4254 When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
4257 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4258 Acked-by: Stefan Roese <sr@denx.de>
4260 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
4261 Author: Yuri Tikhonov <yur@emcraft.com>
4262 Date: Fri Mar 21 09:18:40 2008 +0100
4264 LWMON5: fix dsPIC POST
4266 Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
4268 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
4270 commit 388b82fddc7c05596f3f615f190da0448227dc82
4271 Author: Bartlomiej Sieka <tur@semihalf.com>
4272 Date: Thu Mar 20 23:23:13 2008 +0100
4274 [new uImage] Enable new uImage support for the pcs440ep board.
4276 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4278 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
4279 Author: Bartlomiej Sieka <tur@semihalf.com>
4280 Date: Thu Mar 20 23:23:13 2008 +0100
4282 [new uImage] Do not compile new uImage format support by default
4284 Disable default building of new uImage format support in preparation
4285 for merge with the master. Support for new format can be enabled on
4286 a per-board basis, by defining the following in the board's config file:
4288 #define CONFIG_FIT 1
4289 #define CONFIG_OF_LIBFDT 1
4291 This can be optionally defined to give more verbose output:
4293 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
4295 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4297 commit dafaede8a46c7159310239e036c93e31c6374487
4298 Author: Bartlomiej Sieka <tur@semihalf.com>
4299 Date: Thu Mar 20 23:20:31 2008 +0100
4301 [new uImage] Disable debuging output in preparation for merge with master
4303 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4305 commit fbe7a155027beacebaee9b32e1ada781fe924bca
4306 Author: Bartlomiej Sieka <tur@semihalf.com>
4307 Date: Thu Mar 20 19:38:45 2008 +0100
4309 [new uImage] Compilation and new uImage handling fixes for imxtract
4311 Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
4312 include/config_cmd_default.h. Fix few warnings and handling of new format
4315 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4317 commit 36cc8cbb3379d5166f882641123521735c469f92
4318 Author: Bartlomiej Sieka <tur@semihalf.com>
4319 Date: Thu Mar 20 23:10:19 2008 +0100
4321 [new uImage] Fix autoscr command used with new uImage format
4323 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4325 commit 43142e817f0597be412e7cbe19413f5532eafa5d
4326 Author: Bartlomiej Sieka <tur@semihalf.com>
4327 Date: Thu Mar 20 23:10:19 2008 +0100
4329 [new uImage] Fix *.its files location in documentation
4331 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4333 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
4334 Author: Wolfgang Denk <wd@denx.de>
4335 Date: Thu Mar 20 22:01:38 2008 +0100
4337 lwmon5 POST: remove unreachable code
4339 plus some coding style cleanup
4341 Signed-off-by: Wolfgang Denk <wd@denx.de>
4343 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
4344 Author: Yuri Tikhonov <yur@emcraft.com>
4345 Date: Thu Mar 20 17:56:04 2008 +0300
4347 LWMON5: POST RTC fix
4349 Modify the RTC API to provide one a status for the time reported by
4350 the rtc_get() function:
4351 0 - a reliable time is guaranteed,
4352 < 0 - a reliable time isn't guaranteed (power fault, clock issues,
4355 The RTC chip drivers are responsible for providing this info if the
4356 corresponding chip supports such functionality. If not - always
4357 report that the time is reliable.
4359 The POST RTC test was modified to detect the RTC faults utilizing
4360 this new rtc_get() feature.
4362 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4364 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
4365 Author: Martin Krause <martin.krause@tqs.de>
4366 Date: Wed Mar 19 14:25:14 2008 +0100
4368 TQM5200B: update MTD partition layout
4370 - insert partition for dtb blob to TQM5200B MTD layout
4371 - set env variables dependent on the configured board
4372 (TQM5200 or TQM5200B)
4374 Signed-off-by: Martin Krause <martin.krause@tqs.de>
4376 commit f0105727d132f56a21fa3ed8b162309cca6cac44
4377 Author: Stefan Roese <sr@denx.de>
4378 Date: Wed Mar 19 07:09:26 2008 +0100
4380 CFI: Small cleanup for FLASH_SHOW_PROGRESS
4382 With this patch we don't need that many #ifdef's in the code. It moves
4383 the subtraction into the macro and defines a NOP-macro when
4384 CONFIG_FLASH_SHOW_PROGRESS is not defined.
4386 Signed-off-by: Stefan Roese <sr@denx.de>
4387 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
4389 commit 9a042e9ca512beaaa2cb450274313fc477141241
4390 Author: Jerry Van Baren <gvb.uboot@gmail.com>
4391 Date: Sat Mar 8 13:48:01 2008 -0500
4393 Flash programming progress countdown.
4395 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4397 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
4398 Author: Bartlomiej Sieka <tur@semihalf.com>
4399 Date: Wed Mar 19 10:00:06 2008 +0100
4401 [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
4403 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4405 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
4406 Author: David Gibson <david@gibson.dropbear.id.au>
4407 Date: Mon Feb 18 18:09:04 2008 +1100
4409 libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
4411 Since fdt_node_offset_by_compatible() was converted to the new
4412 fdt_next_node() iterator, a chunk of initialization code became
4413 redundant, but was not removed by oversight. This patch cleans it up.
4415 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4417 commit d0ccb9b140b472039732de102fc14597eedb14df
4418 Author: David Gibson <david@gibson.dropbear.id.au>
4419 Date: Mon Feb 18 18:06:31 2008 +1100
4421 libfdt: Trivial cleanup for CHECK_HEADER)
4423 Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
4424 However, there are a handful of functions (fdt_move, rw_check_header,
4425 fdt_open_into) from other files which could also use it (currently
4426 they open-code something more-or-less identical). Therefore, this
4427 patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
4430 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4432 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
4433 Author: Kumar Gala <galak@kernel.crashing.org>
4434 Date: Wed Feb 20 14:32:36 2008 -0600
4436 Fix fdt boardsetup command parsing
4438 The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
4440 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4442 commit 804887e6001e2f00bea11431bf34d6d472512cda
4443 Author: Kumar Gala <galak@kernel.crashing.org>
4444 Date: Fri Feb 15 03:34:36 2008 -0600
4446 Add sub-commands to fdt
4448 fdt header - Display header info
4449 fdt bootcpu <id> - Set boot cpuid
4450 fdt memory <addr> <size> - Add/Update memory node
4451 fdt rsvmem print - Show current mem reserves
4452 fdt rsvmem add <addr> <size> - Add a mem reserve
4453 fdt rsvmem delete <index> - Delete a mem reserves
4455 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4457 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
4458 Author: David Gibson <david@gibson.dropbear.id.au>
4459 Date: Thu Feb 14 16:50:34 2008 +1100
4461 libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
4463 fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
4464 node which has NOP tags interspersed with its properties. In this
4465 case fdt_add_subnode_namelen() will put the new subnode before the
4466 first NOP tag, even if there are properties after it, which will
4467 result in an invalid blob.
4469 This patch fixes the bug, and adds a testcase for it.
4471 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4473 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
4474 Author: David Gibson <david@gibson.dropbear.id.au>
4475 Date: Tue Feb 12 11:58:31 2008 +1100
4477 libfdt: Add and use a node iteration helper function.
4479 This patch adds an fdt_next_node() function which can be used to
4480 iterate through nodes of the tree while keeping track of depth. This
4481 function is used to simplify the iteration code in a lot of other
4482 functions, and is also exported for use by library users.
4484 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4486 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
4487 Author: David Gibson <david@gibson.dropbear.id.au>
4488 Date: Fri Jan 11 14:55:05 2008 +1100
4490 libfdt: Add fdt_set_name() function
4492 This patch adds an fdt_set_name() function to libfdt, mirroring
4493 fdt_get_name(). This is a r/w function which alters the name of a
4494 given device tree node.
4496 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4498 commit 23e20aa6488e6c0622496549861bfdc74108debe
4499 Author: Yuri Tikhonov <yur@pollux.denx.de>
4500 Date: Tue Mar 18 13:33:30 2008 +0100
4502 lwmon5: Fix register test logic to match the specific GDC h/w.
4504 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4505 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4507 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
4508 Author: Yuri Tikhonov <yur@pollux.denx.de>
4509 Date: Tue Mar 18 13:27:57 2008 +0100
4511 Fix backlight in the lwmon5 POST.
4513 Backlight was switched on even when temperature was too low.
4515 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4516 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4518 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
4519 Author: Yuri Tikhonov <yur@pollux.denx.de>
4520 Date: Wed Feb 6 18:48:36 2008 +0100
4522 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
4524 To enable this, alternative, configuration the U-Boot board configuration
4525 file for lwmon5 includes the definitions of alternative addresses for header
4526 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
4528 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
4529 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
4530 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
4532 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4534 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
4535 Author: Yuri Tikhonov <yur@pollux.denx.de>
4536 Date: Mon Feb 4 17:11:53 2008 +0100
4538 Add support for the lwmon5 board reset via GPIO58.
4540 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4541 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4543 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
4544 Author: Yuri Tikhonov <yur@pollux.denx.de>
4545 Date: Mon Feb 4 17:09:55 2008 +0100
4547 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
4549 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4550 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4552 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
4553 Author: Yuri Tikhonov <yur@pollux.denx.de>
4554 Date: Mon Feb 4 14:11:03 2008 +0100
4556 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
4558 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4559 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4561 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
4562 Author: Yuri Tikhonov <yur@pollux.denx.de>
4563 Date: Mon Feb 4 14:10:42 2008 +0100
4565 The patch adds new POST tests for the Lwmon5 board. These are:
4567 * External Watchdog test;
4573 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4574 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4576 commit c2ed33efbfff5767bca236828e021c55fd547b6c
4577 Author: Yuri Tikhonov <yur@pollux.denx.de>
4578 Date: Mon Feb 4 14:10:01 2008 +0100
4580 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
4582 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4584 commit 3a5d1e7f1309998791702b2a559e3126781746b9
4585 Author: Yuri Tikhonov <yur@pollux.denx.de>
4586 Date: Tue Mar 18 13:33:30 2008 +0100
4588 lwmon5: Fix register test logic to match the specific GDC h/w.
4590 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4591 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4593 commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
4594 Author: Yuri Tikhonov <yur@pollux.denx.de>
4595 Date: Tue Mar 18 13:27:57 2008 +0100
4597 Fix backlight in the lwmon5 POST.
4599 Backlight was switcehd on even when temperature was too low.
4601 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4602 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4604 commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
4605 Author: Yuri Tikhonov <yur@pollux.denx.de>
4606 Date: Wed Feb 6 18:48:36 2008 +0100
4608 The patch introduces the alternative configuration of the log buffer for
4609 the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
4610 the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
4611 PPC440EPX_GPT0_COMP5).
4613 To enable this, alternative, configuration the U-Boot board configuration
4614 file for lwmon5 includes the definitions of alternative addresses for header
4615 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
4617 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
4618 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
4619 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
4621 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4623 commit ff818b21b069f4bc9cb73373cc5a16014be101b7
4624 Author: Yuri Tikhonov <yur@pollux.denx.de>
4625 Date: Mon Feb 4 17:11:53 2008 +0100
4627 Add support for the lwmon5 board reset via GPIO58.
4629 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4630 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4632 commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
4633 Author: Yuri Tikhonov <yur@pollux.denx.de>
4634 Date: Mon Feb 4 17:09:55 2008 +0100
4636 Some fixes to dspic, fpga, and gdc post tests for lwmon5.
4637 Disable external watch-dog for now.
4639 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4640 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4642 commit e262efe35742c1ad4b0966ff501efc26f34a0aec
4643 Author: Yuri Tikhonov <yur@pollux.denx.de>
4644 Date: Mon Feb 4 14:11:03 2008 +0100
4646 The patch introduces the CRITICAL feature of POST tests. If the test
4647 marked as POST_CRITICAL fails then the alternative, post_critical,
4648 boot-command is used. If this command is not defined then U-Boot
4649 enters into interactive mode.
4651 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4652 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4654 commit 65b20dcefc89618193fa51947968dada91e4c778
4655 Author: Yuri Tikhonov <yur@pollux.denx.de>
4656 Date: Mon Feb 4 14:10:42 2008 +0100
4658 The patch adds new POST tests for the Lwmon5 board.
4661 * External Watchdog test;
4667 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4668 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4670 commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
4671 Author: Yuri Tikhonov <yur@pollux.denx.de>
4672 Date: Mon Feb 4 14:10:01 2008 +0100
4674 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
4676 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
4678 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
4679 Author: Wolfgang Denk <wd@denx.de>
4680 Date: Tue Mar 18 17:35:51 2008 +0100
4682 HMI1001: fix compile problem.
4684 Signed-off-by: Wolfgang Denk <wd@denx.de>
4686 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
4687 Author: Mike Frysinger <vapier@gentoo.org>
4688 Date: Mon Feb 18 05:32:30 2008 -0500
4690 Blackfin: BF537-stamp: drop board-specific flash driver for CFI
4692 The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
4693 for the board specific driver at all. Just use the common CFI driver.
4695 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4697 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
4698 Author: Mike Frysinger <vapier@gentoo.org>
4699 Date: Tue Feb 19 00:36:14 2008 -0500
4701 Blackfin: add proper ELF markings to some assembly functions
4703 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4705 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
4706 Author: Mike Frysinger <vapier@gentoo.org>
4707 Date: Tue Feb 19 00:35:17 2008 -0500
4709 Blackfin: new cplbinfo command for viewing cplb tables
4711 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4713 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
4714 Author: Mike Frysinger <vapier@gentoo.org>
4715 Date: Mon Feb 18 05:37:51 2008 -0500
4717 Blackfin: update MAINTAINERS list
4719 Add maintainer information for the Blackfin boards.
4721 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4723 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
4724 Author: Mike Frysinger <vapier@gentoo.org>
4725 Date: Mon Feb 18 05:26:48 2008 -0500
4727 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
4729 Stop tying things to the processor that should be tied to other defines and
4730 change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
4731 system to select the -mcpu option.
4733 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4735 commit 86a20fb920bd198105acf7b1191117f566d637ed
4736 Author: Mike Frysinger <vapier@gentoo.org>
4737 Date: Sat Feb 16 07:40:36 2008 -0500
4739 Blackfin: move bootldr command to common code
4741 This moves the Blackfin-common bootldr command out of the BF537-STAMP
4742 specific board directory and into the common directory so that all Blackfin
4743 boards may utilize it.
4745 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4747 commit decbe029b2a9d3333d02c433389b1c821eea96d7
4748 Author: Heiko Schocher <hs@denx.de>
4749 Date: Fri Mar 14 11:05:20 2008 +0100
4751 mgcoge: update configuration
4753 Fix configuration for mgcoge board
4755 Signed-off-by: Heiko Schocher <hs@denx.de>
4757 commit c136724cda0219c49f1d4b346f00da29b14fdf14
4758 Author: Wolfgang Denk <wd@denx.de>
4759 Date: Sun Mar 16 01:22:59 2008 +0100
4761 drivers/rtc/Makefile: keep list sorted
4763 Signed-off-by: Wolfgang Denk <wd@denx.de>
4765 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
4766 Author: Tor Krill <tor@excito.com>
4767 Date: Sat Mar 15 15:40:26 2008 +0100
4769 Add support for Intersil isl1208 RTC
4771 Signed-off-by: Tor Krill <tor@excito.com>
4773 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
4774 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4775 Date: Sat Mar 15 17:36:41 2008 +0100
4779 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4781 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
4782 Author: Wolfgang Denk <wd@denx.de>
4783 Date: Sun Mar 16 01:12:58 2008 +0100
4785 Conding style cleanup
4787 Signed-off-by: Wolfgang Denk <wd@denx.de>
4789 commit 41712b4e8c95dff23354bcd620e1f9477160c190
4790 Author: Stefan Roese <sr@denx.de>
4791 Date: Wed Mar 5 12:31:53 2008 +0100
4793 ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
4795 This patch adds USB OHCI support to the Canyonlands board port. It also
4796 enables EXT2 support.
4798 Signed-off-by: Stefan Roese <sr@denx.de>
4800 commit 2596f5b9d353ff3e4387a3325d05740f16958038
4801 Author: Stefan Roese <sr@denx.de>
4802 Date: Wed Mar 5 12:29:32 2008 +0100
4804 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
4806 This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
4807 way a board just needs to define this new option to enable the "force
4808 NoPowerSwitching mode" instead of adding new CPU/architecture defines
4809 to the USB source itself.
4811 This new option will be used first with the new AMCC 460EX Canyonlands
4812 board port, which will be posted in a few days.
4814 This patch also fixes a small compilation problem when DEBUG is enabled.
4816 Signed-off-by: Stefan Roese <sr@denx.de>
4818 commit 71665ebf88408ff2acb762af47989fd4365b321a
4819 Author: Stefan Roese <sr@denx.de>
4820 Date: Mon Mar 3 17:27:02 2008 +0100
4822 ppc4xx: Add Canyonlands NAND booting support
4824 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
4825 NAND devices. The only bootstrap option for NAND booting is option F for
4826 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
4827 EEPROM needs to be programmed accordingly.
4829 This patch adds basic NAND booting support for the AMCC Canyonlands aval
4830 board and also adds support to the "bootstrap" command, to enable NAND
4831 booting I2C setting.
4833 Tested with 512 byte page NAND device (32MByte) on Canyonlands.
4835 Signed-off-by: Stefan Roese <sr@denx.de>
4837 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
4838 Author: Stefan Roese <sr@denx.de>
4839 Date: Tue Mar 11 16:53:00 2008 +0100
4841 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
4843 This patch adds support for the AMCC Canyonlands 460EX evaluation
4846 Signed-off-by: Stefan Roese <sr@denx.de>
4848 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
4849 Author: Stefan Roese <sr@denx.de>
4850 Date: Tue Mar 11 16:52:24 2008 +0100
4852 ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
4854 This patch adds support for the AMCC Canyonlands 460EX evaluation
4857 Signed-off-by: Stefan Roese <sr@denx.de>
4859 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
4860 Author: Stefan Roese <sr@denx.de>
4861 Date: Tue Mar 11 16:51:17 2008 +0100
4863 ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
4865 This patch adds support for the AMCC Canyonlands 460EX evaluation
4868 Signed-off-by: Stefan Roese <sr@denx.de>
4870 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
4871 Author: Stefan Roese <sr@denx.de>
4872 Date: Tue Mar 11 15:11:43 2008 +0100
4874 ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
4876 This patch adds basic support for the AMCC 460EX/460GT PPC's.
4878 Signed-off-by: Stefan Roese <sr@denx.de>
4880 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
4881 Author: Stefan Roese <sr@denx.de>
4882 Date: Tue Mar 11 15:11:18 2008 +0100
4884 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
4886 This patch adds basic support for the AMCC 460EX/460GT PPC's.
4888 Signed-off-by: Stefan Roese <sr@denx.de>
4890 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
4891 Author: Stefan Roese <sr@denx.de>
4892 Date: Tue Mar 11 15:07:10 2008 +0100
4894 ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
4896 This patch adds basic support for the AMCC 460EX/460GT PPC's.
4898 Signed-off-by: Stefan Roese <sr@denx.de>
4900 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
4901 Author: Stefan Roese <sr@denx.de>
4902 Date: Tue Mar 11 15:05:50 2008 +0100
4904 ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
4906 This patch adds basic support for the AMCC 460EX/460GT PPC's.
4908 Signed-off-by: Stefan Roese <sr@denx.de>
4910 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
4911 Author: Stefan Roese <sr@denx.de>
4912 Date: Tue Mar 11 15:05:26 2008 +0100
4914 ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
4916 This patch adds basic support for the AMCC 460EX/460GT PPC's.
4918 Signed-off-by: Stefan Roese <sr@denx.de>
4920 commit 56e410178375d9f20be25fb24e180974f0ae120b
4921 Author: Stefan Roese <sr@denx.de>
4922 Date: Tue Feb 19 22:07:57 2008 +0100
4924 ppc4xx: interrupt.c reworked
4926 This patch is a rework of the 4xx interrupt handling done while
4927 adding the 460EX/GT support. Interrupts are needed on 4xx for the
4930 Signed-off-by: Stefan Roese <sr@denx.de>
4932 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
4933 Author: Stefan Roese <sr@denx.de>
4934 Date: Tue Feb 19 22:01:57 2008 +0100
4936 ppc4xx: program_tlb now uses 64bit physical addess
4938 This patch changes the physical addess parameter from 32bit to 64bit.
4939 This is needed for 36bit 4xx platforms to access areas located
4940 beyond the 4GB border, like SoC peripherals (EBC etc.).
4942 Signed-off-by: Stefan Roese <sr@denx.de>
4944 commit c3307fa186af85771924c434997089b8104c0a46
4945 Author: Stefan Roese <sr@denx.de>
4946 Date: Tue Feb 19 21:58:25 2008 +0100
4948 ppc4xx: miiphy.c reworked
4950 While adding the 460EX/GT support I reworked the 4xx miiphy code. It
4951 badly neede some cleanup.
4953 Signed-off-by: Stefan Roese <sr@denx.de>
4955 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
4956 Author: Stefan Roese <sr@denx.de>
4957 Date: Tue Feb 19 16:21:49 2008 +0100
4959 rtc: Add M41T62 support
4961 This patch add support for the STM M41T62 RTC. It is used and tested
4962 on the AMCC Canyonlands 406EX platform.
4964 Signed-off-by: Stefan Roese <sr@denx.de>
4966 commit 217d383e201adc7f2271145ae345ea5eae2b7170
4967 Author: Niklaus Giger <niklaus.giger@netstal.com>
4968 Date: Mon Feb 25 18:46:43 2008 +0100
4970 ppc4xx: Add 405GPr based MCU25 board specific files
4972 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
4974 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
4975 Author: Niklaus Giger <niklaus.giger@netstal.com>
4976 Date: Mon Feb 25 18:46:42 2008 +0100
4978 ppc4xx: Add 405GPr based MCU25 board config file
4980 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
4982 commit b05f35436b733a240559e77e46bed8439665ecc5
4983 Author: Niklaus Giger <niklaus.giger@netstal.com>
4984 Date: Mon Feb 25 18:46:41 2008 +0100
4986 ppc4xx: Add 405GPr based MCU25 board. Global files
4988 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
4990 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
4991 Author: Niklaus Giger <niklaus.giger@netstal.com>
4992 Date: Mon Feb 25 18:37:02 2008 +0100
4994 ppc4xx: HCU4/5. remove obsolete hcu_flash.c
4996 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
4998 commit a079494853cc2bfeddb26673219db0b4b2b31566
4999 Author: Niklaus Giger <niklaus.giger@netstal.com>
5000 Date: Mon Feb 25 18:37:01 2008 +0100
5002 ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
5004 Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
5005 the FLASH_CFI_LEGACY et al. config options.
5007 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
5009 commit e4170e5a50c8110f792bc37472833ae669d69951
5010 Author: Stefan Roese <sr@denx.de>
5011 Date: Tue Mar 11 13:52:25 2008 +0100
5013 ppc4xx: Fix comment in 405EX DDR2 init code
5015 Signed-off-by: Stefan Roese <sr@denx.de>
5017 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
5018 Author: Bartlomiej Sieka <tur@semihalf.com>
5019 Date: Fri Mar 14 16:22:34 2008 +0100
5021 Add MD5 support to the new uImage format
5023 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5025 commit 0ede0c383530a418cf98be9122371a86573cd0db
5026 Author: Bartlomiej Sieka <tur@semihalf.com>
5027 Date: Fri Mar 14 16:22:34 2008 +0100
5029 Add the MD5 algorithm
5031 MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
5032 calculated using the md5() function -- see include/md5.h for details.
5034 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5036 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
5037 Author: Wolfgang Denk <wd@denx.de>
5038 Date: Fri Mar 14 16:04:54 2008 +0100
5040 tools/setlocalversion: use a git-describe-ish format
5042 Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
5043 where 'nnnnn' is the number of commits since the last tag (i.e.,
5044 1.3.2-rc3). This makes it much easier to recognize "newer" versions
5045 and to see how much has been changed since the referenced tag.
5047 Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
5049 Signed-off-by: Wolfgang Denk <wd@denx.de>
5051 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
5052 Author: Wolfgang Denk <wd@denx.de>
5053 Date: Thu Mar 13 14:32:03 2008 +0100
5055 HMI1001: add support for MPC5200 Rev. B processors.
5057 Signed-off-by: Wolfgang Denk <wd@denx.de>
5059 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
5060 Author: Wolfgang Denk <wd@denx.de>
5061 Date: Thu Mar 13 14:29:49 2008 +0100
5063 TQM5200: remove dead code
5065 This board never used a MGT5100 processor.
5067 Signed-off-by: Wolfgang Denk <wd@denx.de>
5069 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
5070 Author: Marian Balakowicz <m8@semihalf.com>
5071 Date: Wed Mar 12 12:14:15 2008 +0100
5073 [new uImage] Fix build issue on ARM
5075 ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
5077 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5079 commit 3310c549a73a949430bfda90876df7552a1dab0c
5080 Author: Marian Balakowicz <m8@semihalf.com>
5081 Date: Wed Mar 12 12:13:13 2008 +0100
5083 [new uImage] Add new uImage format documentation and examples
5085 Create doc/uImage.FIT documentation directory with the following files:
5086 - command_syntax_extensions.txt : extended command syntax description
5087 - howto.txt : short usage howto
5088 - source_file_format.txt : internal new uImage format description
5090 Add example image source files:
5095 Update README appropriately.
5097 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5098 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5100 commit 1ec73761d2e247078f4520a265d463e8b73391a2
5101 Author: Marian Balakowicz <m8@semihalf.com>
5102 Date: Wed Mar 12 10:35:52 2008 +0100
5104 [new uImage] Fix definition of common bootm_headers_t fields
5106 verify, autostart and lmb fields are used regardless of CONFIG_FIT
5107 setting, move their definitions to common section.
5109 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5111 commit 1d1cb4270edc6a99276834064069717f9782c491
5112 Author: Marian Balakowicz <m8@semihalf.com>
5113 Date: Wed Mar 12 10:35:51 2008 +0100
5115 [new uImage] Fix build problems on trab board
5117 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5119 commit f773bea8e11f4a11c388dcee956b2444203e6b65
5120 Author: Marian Balakowicz <m8@semihalf.com>
5121 Date: Wed Mar 12 10:35:46 2008 +0100
5123 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
5125 Save FIT configuration provied in the first bootm argument and use it
5126 when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
5127 arguments are not specified.
5129 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5131 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
5132 Author: Marian Balakowicz <m8@semihalf.com>
5133 Date: Wed Mar 12 10:33:01 2008 +0100
5135 [new uImage] More verbose kernel image uncompress error message
5137 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5139 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
5140 Author: Marian Balakowicz <m8@semihalf.com>
5141 Date: Wed Mar 12 10:33:01 2008 +0100
5143 [new uImage] Use show_boot_progress() for new uImage format
5145 This patch allocates a set of show_boot_progress() IDs for new uImage format
5146 and adds show_boot_progress() calls in new uImage format handling code.
5148 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5150 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
5151 Author: Marian Balakowicz <m8@semihalf.com>
5152 Date: Wed Mar 12 10:33:01 2008 +0100
5154 [new uImage] Add new uImage fromat support to fpga command
5156 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5158 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
5159 Author: Marian Balakowicz <m8@semihalf.com>
5160 Date: Wed Mar 12 10:33:01 2008 +0100
5162 [new uImage] Add new uImage format handling to other bootm related commands
5168 diskboot - cmd_ide.c
5170 scsiboot - cmd_scsi.c
5173 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5175 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
5176 Author: Marian Balakowicz <m8@semihalf.com>
5177 Date: Wed Mar 12 10:33:00 2008 +0100
5179 [new uImage] Add new uImage format support to imgextract command
5181 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5183 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
5184 Author: Marian Balakowicz <m8@semihalf.com>
5185 Date: Wed Mar 12 10:33:00 2008 +0100
5187 [new uImage] Add new uImage format support to autoscript routine
5189 autoscript() routine is updated to accept second argument, which
5190 is only used for FIT images and provides a FIT subimage unit name.
5192 autoscript() routine callers must now pass two arguments. For
5193 non-interactive use (like in cmd_load.c, cmd_net.c), new environment
5194 variable 'autoscript_uname' is introduced and used as a FIT
5195 subimage unit name source.
5197 autoscript command accepts extended syntax of the addr argument:
5200 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5202 commit cd7c596e9f561dbbc17b717277438aee78cde14f
5203 Author: Marian Balakowicz <m8@semihalf.com>
5204 Date: Wed Mar 12 10:33:00 2008 +0100
5206 [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
5208 This patch updates architecture specific implementations of
5209 do_bootm_linux() adding new uImage format handling for
5210 operations like get kernel entry point address, get kernel
5211 image data start address.
5213 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5215 commit 3dfe110149311425919e6d6a14b561b4207498f1
5216 Author: Marian Balakowicz <m8@semihalf.com>
5217 Date: Wed Mar 12 10:32:59 2008 +0100
5219 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
5221 This patch adds new node offset fields to struct bootm_headers
5222 and updates bootm_headers processing code to make use of them.
5223 Saved node offsets allow to avoid repeating fit_image_get_node() calls.
5225 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5227 commit bc8ed486b125452ba3bd8344f052f437329150c5
5228 Author: Marian Balakowicz <m8@semihalf.com>
5229 Date: Wed Mar 12 10:32:53 2008 +0100
5231 [new uImage] ppc: Add new uImage format support to FDT handling routines
5233 Support for new (FIT) format uImages is added to powerpc specific
5234 boot_get_fdt() routine which now recognizes, sanity checks FIT image
5235 and is able to access data sections of the requested component image.
5237 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5239 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
5240 Author: Marian Balakowicz <m8@semihalf.com>
5241 Date: Wed Mar 12 10:14:57 2008 +0100
5243 [new uImage] Re-enable interrupts for non automatic booting
5245 Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
5246 environment variable is not set to 'yes'.
5248 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5250 commit d985c8498c4e47095820da97aa722381d39172c5
5251 Author: Marian Balakowicz <m8@semihalf.com>
5252 Date: Wed Mar 12 10:14:38 2008 +0100
5254 [new uImage] Remove unnecessary arguments passed to ramdisk routines
5256 boot_get_ramdisk() and image_get_ramdisk() do not need all
5257 cmdtp, flag, argc and argv arguments. Simplify routines definition.
5259 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5261 commit c87796483bc7c2900470dc747c367f602577608d
5262 Author: Marian Balakowicz <m8@semihalf.com>
5263 Date: Wed Mar 12 10:12:37 2008 +0100
5265 [new uImage] Add new uImage format support for ramdisk handling
5267 This patch updates boot_get_ramdisk() routine adding format
5268 verification and handling for new (FIT) uImages.
5270 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5272 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
5273 Author: Marian Balakowicz <m8@semihalf.com>
5274 Date: Wed Mar 12 10:01:05 2008 +0100
5276 [new uImage] Add new uImage format support for kernel booting
5278 New format uImages are recognized by the bootm command,
5279 validity of specified kernel component image is checked and
5280 its data section located and used for further processing
5281 (uncompress, load, etc.)
5283 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5285 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
5286 Author: Marian Balakowicz <m8@semihalf.com>
5287 Date: Tue Mar 11 12:35:20 2008 +0100
5289 [new uImage] Add new uImage format support for imls and iminfo commands
5291 imls and iminfo can now recognize nad print out contents of the new (FIT)
5294 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5296 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
5297 Author: Bartlomiej Sieka <tur@semihalf.com>
5298 Date: Tue Mar 11 12:34:47 2008 +0100
5300 [new uImage] Add support for new uImage format to mkimage tool
5302 Support for the new uImage format (FIT) is added to mkimage tool.
5303 Commandline syntax is appropriately extended:
5305 mkimage [-D dtc_options] -f fit-image.its fit-image
5307 mkimage (together with dtc) takes fit-image.its and referenced therein
5308 binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
5309 final image that can be transferred to the target (e.g., via tftp) and then
5310 booted using the bootm command in U-Boot.
5312 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5314 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
5315 Author: Marian Balakowicz <m8@semihalf.com>
5316 Date: Mon Mar 10 17:53:49 2008 +0100
5318 [new uImage] Make node unit names const in struct bootm_headers
5320 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5322 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
5323 Author: Marian Balakowicz <m8@semihalf.com>
5324 Date: Fri Feb 29 21:24:06 2008 +0100
5326 [new uImage] New uImage low-level API
5328 Add FDT-based functions for handling new format component images,
5329 configurations, node operations, property get/set, etc.
5331 fit_ - routines handling global new format uImage operations
5332 like get/set top level property, process all nodes, etc.
5333 fit_image_ - routines handling component images subnodes
5334 fit_conf_ - routines handling configurations node
5336 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5337 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5339 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
5340 Author: Wolfgang Denk <wd@denx.de>
5341 Date: Sun Mar 9 16:20:02 2008 +0100
5345 Update CHANGELOG for release.
5347 Signed-off-by: Wolfgang Denk <wd@denx.de>
5349 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
5350 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5351 Date: Sun Mar 9 14:52:11 2008 +0100
5353 SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
5355 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5356 Signed-off-by: Wolfgang Denk <wd@denx.de>
5358 commit db695b78515ddb88a2d4f3357c120345efbf59ec
5359 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5360 Date: Sun Mar 9 10:44:01 2008 +0100
5362 scb9328: Fix flash warning: type qualifiers ignored on function return type
5364 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5366 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
5367 Author: Wolfgang Denk <wd@denx.de>
5368 Date: Sun Mar 9 10:50:41 2008 +0100
5370 esd/common/fpga.c: fix indentation.
5372 Signed-off-by: Wolfgang Denk <wd@denx.de>
5374 commit cc3843e36453e2b8db65d7e56de938ba045016a0
5375 Author: Wolfgang Denk <wd@denx.de>
5376 Date: Sun Mar 9 10:33:31 2008 +0100
5378 common/kgdb.c: fix 'dereferencing type-punned pointer' warning
5380 and get rid of a couple of unneeded casts.
5382 Signed-off-by: Wolfgang Denk <wd@denx.de>
5384 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
5385 Author: Wolfgang Denk <wd@denx.de>
5386 Date: Sun Mar 9 10:09:53 2008 +0100
5388 esd/common/fpga.c: fix 'assignment of read-only location' error
5390 Signed-off-by: Wolfgang Denk <wd@denx.de>
5392 commit c6fe4dabac066e8758345d249032768496983a3e
5393 Author: Wolfgang Denk <wd@denx.de>
5394 Date: Sun Mar 9 02:13:19 2008 +0100
5396 Makefile: make build silently again.
5398 Signed-off-by: Wolfgang Denk <wd@denx.de>
5400 commit 76babc86576f092573599334c85ec543fdbc6015
5401 Author: Wolfgang Denk <wd@denx.de>
5402 Date: Sun Mar 9 02:07:49 2008 +0100
5404 m501sk: Fix out of tree building
5406 Signed-off-by: Wolfgang Denk <wd@denx.de>
5408 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
5409 Author: Wolfgang Denk <wd@denx.de>
5410 Date: Sun Mar 9 00:06:09 2008 +0100
5412 ADS5121: fix out of tree build
5414 and simplify Makefile a bit.
5416 Signed-off-by: Wolfgang Denk <wd@denx.de>
5418 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
5419 Author: Wolfgang Denk <wd@denx.de>
5420 Date: Sat Mar 8 22:35:31 2008 +0100
5424 Signed-off-by: Wolfgang Denk <wd@denx.de>
5426 commit 78a90f827df74520e939c794fc7413dace21c4db
5427 Author: Wolfgang Denk <wd@denx.de>
5428 Date: Sat Mar 8 22:35:04 2008 +0100
5432 Signed-off-by: Wolfgang Denk <wd@denx.de>
5434 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
5435 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5436 Date: Sat Mar 8 21:30:04 2008 +0100
5438 esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
5440 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5442 commit d75469d48c05795144f4b8ba76addbb4920a7bba
5443 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5444 Date: Sat Mar 8 09:25:49 2008 +0900
5446 net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
5448 When rtl_recv() of rtl8169 is called, OWNbit of status register
5449 is not enable occasionally.
5450 rtl_recv() doesn't work normally when the driver doesn't do
5451 appropriate processing.
5452 This patch fix this problem.
5454 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5456 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
5457 Author: Heiko Schocher <hs@denx.de>
5458 Date: Fri Mar 7 08:15:28 2008 +0100
5460 mgsuvd: update board configuration
5462 initialize the UPIOx controller.
5464 Signed-off-by: Heiko Schocher <hs@denx.de>
5466 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
5467 Author: Heiko Schocher <hs@denx.de>
5468 Date: Fri Mar 7 08:13:41 2008 +0100
5470 mgcoge: update board configuration
5472 add support for the config Flash.
5473 initialize the UPIOx controller.
5475 Signed-off-by: Heiko Schocher <hs@denx.de>
5477 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
5478 Author: Kim Phillips <kim.phillips@freescale.com>
5479 Date: Fri Mar 7 12:27:31 2008 -0600
5481 mpc83xx: make dtb basename file references equal those of linux
5483 the dts file basenames were updated in linux - this helps avoid
5484 inadvertently loading any old dtbs laying around.
5486 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5488 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
5489 Author: Kim Phillips <kim.phillips@freescale.com>
5490 Date: Wed Feb 27 16:08:22 2008 -0600
5492 net: uec_phy: actually increment the timeout counter
5494 allow u-boot to recover (and, e.g., switch to another interface) in the
5495 case where a PHY does not report autonegotiation is complete within its
5496 two second timeout value.
5498 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5500 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
5501 Author: Markus Brunner <super.firetwister@googlemail.com>
5502 Date: Wed Mar 5 21:38:12 2008 +0100
5504 fix taihu soft spi_read
5506 The taihu board used gpio_read_out_bit which reads the output register and not
5509 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
5511 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
5512 Author: Stefan Roese <sr@denx.de>
5513 Date: Fri Mar 7 08:01:43 2008 +0100
5515 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
5517 Signed-off-by: Stefan Roese <sr@denx.de>
5519 commit bd4458cb47abecabd406b1210457be96c69fc49d
5520 Author: Dave Liu <r63238@freescale.com>
5521 Date: Tue Mar 4 16:59:22 2008 +0800
5523 837xEMDS: Improve the system performance
5525 1. Make the CSB bus pipeline depth as 4, and enable
5527 2. Raise the eTSEC emergency priority;
5528 3. Use the highest IP blocks clock.
5530 Signed-off-by: Dave Liu <daveliu@freescale.com>
5532 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
5533 Author: Detlev Zundel <dzu@denx.de>
5534 Date: Thu Mar 6 16:45:53 2008 +0100
5536 Replace "run load; run update" with conditionalized "run load update".
5538 The latter version stops when "run load" fails for whatever reasons
5539 rendering the combination *a lot* more secure.
5541 Signed-off-by: Detlev Zundel <dzu@denx.de>
5543 commit 6bc113886d7d316df1a4e459bec8baf027518551
5544 Author: Stefan Roese <sr@denx.de>
5545 Date: Tue Mar 4 17:40:41 2008 +0100
5547 net: Print error message upon net usage when no ethernet-interface is found
5549 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
5550 defined. Then no ethernet interface is available but a simple "tftp"
5551 command will return without any error message which is quite confusing.
5553 Signed-off-by: Stefan Roese <sr@denx.de>
5555 commit a30a549a3553032d809e0356306b62de0b125901
5556 Author: Jon Loeliger <jdl@freescale.com>
5557 Date: Tue Mar 4 10:03:03 2008 -0600
5559 Remove erroneous or extra spd.h #includers.
5561 Many of the spd.h #includers don't need it,
5562 and wanted to have spd_sdram() declared instead.
5563 Since they didn't get that, some also had open
5564 coded extern declarations of it instead or as well.
5565 Fix it all up by using spd_sdram.h where needed.
5567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5569 commit a4475386cef14af3fd88f0518b688e755669486d
5570 Author: Wolfgang Denk <wd@denx.de>
5571 Date: Tue Mar 4 17:41:28 2008 +0100
5573 PCS440EP: fix build problems (redundant #define)
5575 Signed-off-by: Wolfgang Denk <wd@denx.de>
5577 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
5578 Author: Stefan Roese <sr@denx.de>
5579 Date: Tue Mar 4 17:39:25 2008 +0100
5581 net: Print error message upon net usage when no ethernet-interface is found
5583 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
5584 defined. Then no ethernet interface is available but a simple "tftp"
5585 command will return without any error message which is quite confusing.
5587 Signed-off-by: Stefan Roese <sr@denx.de>
5589 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
5590 Author: Wolfgang Denk <wd@denx.de>
5591 Date: Tue Mar 4 17:38:50 2008 +0100
5593 W7OLMC/W7OLMG: fix build problems (redundant #define)
5595 Signed-off-by: Wolfgang Denk <wd@denx.de>
5597 commit f9301e1cda296245ba052d7b08321199c3d0af9d
5598 Author: Wolfgang Denk <wd@denx.de>
5599 Date: Tue Mar 4 14:58:31 2008 +0100
5601 Makefile: fix problem with out-of-tree builds introduced by 5013c09f
5603 Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
5604 problem for out-of-tree builds which caused "make clean" to fail.
5606 Signed-off-by: Wolfgang Denk <wd@denx.de>
5608 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
5609 Author: Wolfgang Denk <wd@denx.de>
5610 Date: Tue Mar 4 11:58:26 2008 +0100
5612 examples/Makefile: build "hello_world" on 8xx, too.
5614 Signed-off-by: Wolfgang Denk <wd@denx.de>
5616 commit 74eb0222594fd23aafdf168e60e872814eea8b62
5617 Author: Mike Nuss <mike@terascala.com>
5618 Date: Mon Mar 3 15:27:05 2008 -0500
5620 PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
5622 Every now and then a Sequoia board (or equivalent hardware) had
5623 problems connecting to a Gigabit capable network interface.
5625 There were differences in the PHY setup between Linux and U-Boot.
5627 This patch fixes the problem. Apparently "remote fault" is being set,
5628 which signals to some devices (on the other end of the cable) that a
5629 fault has occurred, while other devices ignore it. I believe the RF bit
5630 was causing the issue, but I removed T4 also, to match up with Linux.
5632 Signed-off-by: Mike Nuss <mike@terascala.com>
5634 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
5635 Author: Timur Tabi <timur@freescale.com>
5636 Date: Mon Mar 3 09:58:52 2008 -0600
5638 fix QE firmware uploading limit
5640 Fix a typo in qe_upload_firmware() that prevented uploading firmware on
5641 systems with more than one RISC core.
5643 Signed-off-by: Timur Tabi <timur@freescale.com>
5645 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
5646 Author: Bernhard Nemec <bnemec@ganssloser.com>
5647 Date: Mon Mar 3 11:57:23 2008 +0000
5649 Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
5651 Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
5652 see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
5654 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
5656 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
5657 Author: Kim B. Heino <Kim.Heino@bluegiga.com>
5658 Date: Mon Mar 3 10:39:13 2008 +0200
5660 fix copy from ram to dataflash
5662 If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
5663 routines instead of dataflash. This is because it checks "if source
5664 address is not dataflash" instead of target address.
5666 Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
5668 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
5669 Author: Wolfgang Denk <wd@denx.de>
5670 Date: Mon Mar 3 12:16:44 2008 +0100
5672 Fix quoting problem (preboot setting) in many board config files.
5674 Signed-off-by: Wolfgang Denk <wd@denx.de>
5676 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
5677 Author: Wolfgang Denk <wd@denx.de>
5678 Date: Mon Mar 3 12:36:49 2008 +0100
5680 ADS5121: Fix default environment.
5682 Signed-off-by: Wolfgang Denk <wd@denx.de>
5684 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
5685 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5686 Date: Sun Mar 2 16:12:31 2008 +0100
5688 Makefile: Fix missing unconfig and mkconfig use
5690 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5692 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
5693 Author: michael <trimarchi@gandalf.sssup.it>
5694 Date: Sun Mar 2 23:33:46 2008 +0100
5696 Fix checking fat32 cluster size.
5698 This fixes the cluster size tests in the FAT32 file system.
5699 The current implementation of VFAT support doesn't work if the
5700 referred cluster has an offset > 16bit representation, causing
5701 "fatload" and "fatls" commands etc. to fail.
5703 Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
5705 commit 661bad63a076a96c39c64f136915f146725af92b
5706 Author: Wolfgang Denk <wd@denx.de>
5707 Date: Sun Mar 2 22:57:23 2008 +0100
5709 Prepare v1.3.2-rc2 release candidate
5711 Signed-off-by: Wolfgang Denk <wd@denx.de>
5713 commit 76957cb3d621bf664311908e5962e151c633c285
5714 Author: Stefan Roese <sr@denx.de>
5715 Date: Sat Mar 1 12:11:40 2008 +0100
5717 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
5719 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
5720 currently 4k/2k is configured. This patch fixes this issue.
5722 Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
5724 Signed-off-by: Stefan Roese <sr@denx.de>
5726 commit 118978c8eb43803e2794233922df4249fa278b83
5727 Author: Woodruff, Richard <r-woodruff2@ti.com>
5728 Date: Fri Feb 29 17:34:35 2008 -0600
5730 Fix alignment error on ARM for modules
5732 Fix alignment fault on ARM when running modules. With out an explicit
5733 linker file gcc4.2.1 will half word align __bss_start's value. The word
5734 dereference will crash hello_world.
5736 signed-off-by Richard Woodruff <r-woodruff2@ti.com>
5738 commit ce1120dd703e6f12c59e4eba9962356a0300b832
5739 Author: Dave Liu <r63238@freescale.com>
5740 Date: Fri Feb 29 17:45:31 2008 +0800
5742 fs: Fix ext2 read issue
5744 The ext2 aligned process will corrupt the key
5745 data struct, the patch fix this.
5747 Signed-off-by: Dave Liu <daveliu@freescale.com>
5749 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
5750 Author: Wolfgang Denk <wd@denx.de>
5751 Date: Sun Mar 2 22:45:33 2008 +0100
5753 Makefile: cleanup "clean" target
5755 Make sure CDPATH settings cannot interfere.
5758 Signed-off-by: Wolfgang Denk <wd@denx.de>
5760 commit ffda586fc1373243c9794babde69500f6293a8d8
5761 Author: Li Yang <leoli@freescale.com>
5762 Date: Fri Feb 29 11:46:05 2008 +0800
5764 add cscope build target
5766 Add cscope build target to generate cscope database for code browsing.
5768 Signed-off-by: Li Yang <leoli@freescale.com>
5770 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
5771 Author: Kim Phillips <kim.phillips@freescale.com>
5772 Date: Wed Feb 27 15:06:39 2008 -0600
5774 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
5776 erratum 5.6 states the autoneg completion bit is functional only if the
5777 autoneg bit is asserted.
5779 This fixes any secondarily-issued networking commands on non-gigabit
5780 links on the mpc8360 mds board.
5782 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5784 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
5785 Author: John Rigby <jrigby@freescale.com>
5786 Date: Tue Feb 26 09:38:14 2008 -0700
5788 MPC5121e ADS PCI support take 3
5790 Adds PCI support for MPC5121
5792 Tested with drivers/net/rtl8139.c
5794 Support is conditional since PCI on old silicon does not work.
5796 ads5121_PCI_config turns on PCI
5798 In this version, condition compilation of PCI code has been moved
5799 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
5800 suggested by Jean-Christophe PLAGNIOL-VILLARD
5802 Signed-off-by: John Rigby <jrigby@freescale.com>
5804 commit 44b4dbed4133f657705b7c5193209da9978243a7
5805 Author: Anatolij Gustschin <agust@denx.de>
5806 Date: Mon Feb 25 23:53:07 2008 +0100
5808 Fix warnings while compilation of post/drivers/memory.c
5810 Fix warnings while compilation with new gcc in eldk-4.2
5812 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5814 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
5815 Author: Anatolij Gustschin <agust@denx.de>
5816 Date: Mon Feb 25 20:54:04 2008 +0100
5818 ppc4xx: Fix problem in 4xx_enet.c driver
5820 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
5821 enabled. To reproduce the problem ensure that 'ethrotate'
5822 environment variable isn't set to "no" and then run
5823 "tftp 200000 not_existent_file".
5824 This patch tries to fix the issue.
5826 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5828 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
5829 Author: Anatolij Gustschin <agust@denx.de>
5830 Date: Mon Feb 25 20:04:20 2008 +0100
5832 POST: Disable cache while SPR POST
5834 Currently (since commit b2e2142c) u-boot crashes on
5835 sequoia board while SPR test if CONFIG_4xx_DCACHE is
5836 enabled. This patch disables the cache while SPR test.
5838 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5840 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
5841 Author: Martin Krause <martin.krause@tqs.de>
5842 Date: Mon Feb 25 17:52:40 2008 +0100
5844 TQM5200: use automatic fdt memory fixup (part 2)
5846 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
5847 TB5200 and TB5200_B to fixup the /memory node with the memory values
5850 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5852 commit 44ceec253ea941b301abf4b079d52324def69d92
5853 Author: Martin Krause <martin.krause@tqs.de>
5854 Date: Mon Feb 25 15:17:05 2008 +0100
5856 TQM5200: use automatic fdt memory fixup
5858 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
5859 TB5200 and TB5200_B to fixup the /memory node with the memory values
5862 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5864 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
5865 Author: Martin Krause <martin.krause@tqs.de>
5866 Date: Mon Feb 25 13:27:52 2008 +0100
5868 TQM5200: fix bug in SDRAM initialization code
5870 This patch fixes a bug in the SDRAM initialization code for the
5871 TQM5200. The hi_addr bit is now set correctly. Without this patch
5872 the hi_addr bit is always set to 1, if the second SDRAM bank is
5875 For other MPC5200 boards a correspondig patch has already been applied
5876 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
5878 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5880 Forget the first patch please. I confused flash with SDRAM in
5883 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
5884 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5885 Date: Mon Feb 25 00:03:12 2008 +0100
5887 mx1fs2/flash: Fix multiple compiler warnings
5889 "pointer targets in assignment differ in signedness"
5891 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5893 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
5894 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5895 Date: Mon Feb 25 00:03:11 2008 +0100
5897 arm-imx: Fix register definitions
5899 Sync register definitions with linux
5901 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5903 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
5904 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5905 Date: Mon Feb 25 00:03:10 2008 +0100
5907 actua1/actua2/actua3: Fix multiple unused variable warnings
5910 actux1.c: In function 'checkboard':
5911 actux1.c:92: warning: unused variable 'revision'
5914 actux2.c: In function 'checkboard':
5915 actux2.c:100: warning: unused variable 's'
5916 actux2.c:99: warning: unused variable 'revision'
5917 actux2.c: In function 'reset_phy':
5918 actux2.c:130: warning: unused variable 'i'
5921 actux3.c: In function 'checkboard':
5922 actux3.c:114: warning: unused variable 'revision'
5924 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5926 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
5927 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
5928 Date: Sun Feb 24 11:44:29 2008 +0900
5930 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
5932 The previous patch was lacking of i386, microblaze, nios and nios2. This
5933 patch tries to fix them.
5935 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
5937 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
5938 Author: Marian Balakowicz <m8@semihalf.com>
5939 Date: Fri Feb 29 22:22:46 2008 +0100
5941 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
5943 Do not use global fdt blob pointer, calculate blob size from routine
5944 argument blob pointer.
5946 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5948 commit d1cc52879c8966507dad9fb575481e6d3985e64e
5949 Author: David Gibson <david@gibson.dropbear.id.au>
5950 Date: Tue Feb 12 00:58:31 2008 +1100
5952 libfdt: Add and use a node iteration helper function.
5954 This patch adds an fdt_next_node() function which can be used to
5955 iterate through nodes of the tree while keeping track of depth. This
5956 function is used to simplify the iteration code in a lot of other
5957 functions, and is also exported for use by library users.
5959 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
5961 commit 8cf30809a82902a471866d2f07725ce3b8a22291
5962 Author: Bartlomiej Sieka <tur@semihalf.com>
5963 Date: Fri Feb 29 16:00:24 2008 +0100
5965 [new uImage] Add libfdt support to mkimage
5967 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5969 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
5970 Author: Bartlomiej Sieka <tur@semihalf.com>
5971 Date: Fri Feb 29 16:00:23 2008 +0100
5973 [new uImage] Add sha1.o object to mkimage binary build
5975 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5977 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
5978 Author: Marian Balakowicz <m8@semihalf.com>
5979 Date: Fri Feb 29 16:00:06 2008 +0100
5981 [new uImage] Fix component handling for legacy multi component images
5983 Use uint32_t when accessing size table in image_multi_count() and
5984 image_multi_getimg() for multi component images.
5986 Add missing uimage_to_cpu() endianness conversion.
5988 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5990 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
5991 Author: Marian Balakowicz <m8@semihalf.com>
5992 Date: Fri Feb 29 15:59:59 2008 +0100
5994 [new uImage] Share common uImage code between mkimage and U-boot
5996 This patch adds the following common routines:
5998 1) Dedicated mkimage print_header() is replaced with common
5999 image_print_contents()
6000 image_print_contents_noindent()
6002 2) Common os/arch/type/comp fields name <--> id translation routines
6003 genimg_get_os_name()
6004 genimg_get_arch_name()
6005 genimg_get_type_name()
6006 genimg_get_comp_name()
6008 genimg_get_arch_id()
6009 genimg_get_type_id()
6010 genimg_get_comp_id()
6012 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6014 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
6015 Author: Marian Balakowicz <m8@semihalf.com>
6016 Date: Fri Feb 29 14:58:34 2008 +0100
6018 [new uImage] Update naming convention for bootm/uImage related code
6020 This patch introduces the following prefix convention for the
6021 image format handling and bootm related code:
6023 genimg_ - dual format shared code
6024 image_ - legacy uImage format specific code
6025 fit_ - new uImage format specific code
6026 boot_ - booting process related code
6028 Related routines are renamed and a few pieces of code are moved around and
6031 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6033 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
6034 Author: Kumar Gala <galak@kernel.crashing.org>
6035 Date: Wed Feb 27 21:51:51 2008 -0600
6037 [new uImage] Respect autostart setting in linux bootm
6039 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6040 Acked-by: Marian Balakowicz <m8@semihalf.com>
6042 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
6043 Author: Kumar Gala <galak@kernel.crashing.org>
6044 Date: Wed Feb 27 21:51:50 2008 -0600
6046 [new uImage] Provide ability to restrict region used for boot images
6048 Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
6049 to restrict what memory range is used for bootm.
6051 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6052 Acked-by: Marian Balakowicz <m8@semihalf.com>
6054 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
6055 Author: Kumar Gala <galak@kernel.crashing.org>
6056 Date: Wed Feb 27 21:51:49 2008 -0600
6058 [new uImage] Use lmb for bootm allocations
6060 Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
6061 functions over to using lmb for allocation of the ramdisk, command line
6064 Convert PPC specific fdt_relocate() to use lmb for allocation of the device
6067 Provided a weak function that board code can call to do additional
6068 lmb reserves if needed.
6070 Also introduce the concept of bootmap_base to specify the offset in
6071 physical memory that the bootmap is located at. This is used for
6072 allocations of the cmdline, kernel bd, and device tree as they should
6073 be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
6075 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6077 commit f5614e7926863bf0225ec860d9b319741a9c4004
6078 Author: Kumar Gala <galak@kernel.crashing.org>
6079 Date: Wed Feb 27 21:51:48 2008 -0600
6081 [new uImage] Add autostart flag to bootm_headers structure
6083 The autostart env variable was dropped as part of the initial new uImage
6084 cleanup. Add it back here so the arch specific code can decide if it
6085 wants to really boot or not.
6087 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6088 Acked-by: Marian Balakowicz <m8@semihalf.com>
6090 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
6091 Author: Kumar Gala <galak@kernel.crashing.org>
6092 Date: Wed Feb 27 21:51:47 2008 -0600
6094 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
6096 Introduce the LMB lib used on PPC in the kernel as a clean way to manage
6097 the memory spaces used by various boot images and structures. This code
6098 will allow us to simplify the code in bootm and its support functions.
6100 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6102 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
6103 Author: Kumar Gala <galak@kernel.crashing.org>
6104 Date: Tue Feb 19 22:03:47 2008 -0600
6106 [new uImage] ppc: Allow boards to specify effective amount of memory
6108 For historical reasons we limited the stack to 256M because some boards
6109 could only map that much via BATS. However newer boards are capable of
6110 mapping more memory (for example 85xx is capable of doing up to 2G).
6112 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6113 Acked-by: Marian Balakowicz <m8@semihalf.com>
6115 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
6116 Author: Kumar Gala <galak@kernel.crashing.org>
6117 Date: Wed Feb 27 21:51:46 2008 -0600
6119 [new uImage] rework error handling so common functions don't reset
6121 Changed image_get_ramdisk() to just return NULL on error and have
6122 get_ramdisk() propogate that error to the caller. It's left to the
6123 caller to call do_reset() if it wants to.
6125 Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
6126 to a common location. In the future we will change get_fdt() and
6127 fdt_relocate() to return success/failure and not call do_reset() at all.
6129 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6130 Acked-by: Marian Balakowicz <m8@semihalf.com>
6132 commit d2bc095a639672def11d5d043b5688d0dbd692ec
6133 Author: Kumar Gala <galak@kernel.crashing.org>
6134 Date: Wed Feb 27 21:51:45 2008 -0600
6136 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
6138 Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
6139 however it does mean we have to go in and fixup the initrd info since
6140 we don't know where it will be.
6142 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6144 commit 27953493ef025fb698d68c5dee39b36f01f4d530
6145 Author: Kumar Gala <galak@kernel.crashing.org>
6146 Date: Wed Feb 27 21:51:44 2008 -0600
6148 [new uImage] ppc: Determine if we are booting an OF style
6150 If we are bootin OF style than we can skip setting up some things
6151 that are used for the old boot method.
6153 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6154 Acked-by: Marian Balakowicz <m8@semihalf.com>
6156 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
6157 Author: Kumar Gala <galak@kernel.crashing.org>
6158 Date: Wed Feb 27 21:51:43 2008 -0600
6160 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
6162 We don't actually need the kdb param as we are just using it to get
6163 bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
6164 boot via OF we might not actually fill out a kdb.
6166 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6167 Acked-by: Marian Balakowicz <m8@semihalf.com>
6169 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
6170 Author: Kumar Gala <galak@kernel.crashing.org>
6171 Date: Wed Feb 27 16:30:47 2008 -0600
6173 85xx: Don't icbi when unlocking the cache
6175 There is no reason to icbi when invalidating the temporary stack in
6176 the d-cache. Its impossible on e500 to have the i-cache contain
6177 any addresses in the temp stack and it can be problematic in generating
6178 transactions on the bus to non-valid addresses.
6180 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6182 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
6183 Author: Andy Fleming <afleming@freescale.com>
6184 Date: Wed Feb 27 15:50:50 2008 -0600
6186 Fix source for ECM error IVPR
6188 The source vector for the ECM was being set to 2,
6189 but that's what the source vector for DDR was being
6190 set to. Change it to 1.
6192 Signed-off-by: Andy Fleming <afleming@freescale.com>
6194 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
6195 Author: Andy Fleming <afleming@freescale.com>
6196 Date: Wed Feb 27 14:29:58 2008 -0600
6198 Invalidate INIT_RAM TLB mappings
6200 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
6201 mappings to be unguarded. This collided with an existing "bug"
6202 where the mappings for the INIT_RAM were being kept around.
6203 This meant that speculative loads to those addresses were
6204 succeeding in the TLB, and going out to the bus, where they
6205 were causing an exception (there's nothing at that address). The
6206 Flash code was coincidentally causing such a speculative load.
6207 Rather than go back to mapping the INIT RAM as guarded, we fix
6208 it so that the entries for the INIT_RAM are invalidated. Thus
6209 the speculative loads will fail in the TLB, and have no effect.
6211 Signed-off-by: Andy Fleming <afleming@freescale.com>
6213 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
6214 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6215 Date: Sun Feb 17 22:56:17 2008 +0100
6217 sbc8548: Fix Revision reading and unused variable 'path'
6219 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6221 commit 495d162374c472f46454453553382ad0735dc725
6222 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6223 Date: Sun Feb 17 22:56:16 2008 +0100
6225 sbc8548: Fix cfi flash bank declaration
6227 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6229 commit 4efbe9dbb129f857f27856936112c8c02f016be6
6230 Author: Marian Balakowicz <m8@semihalf.com>
6231 Date: Wed Feb 27 11:02:26 2008 +0100
6233 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
6235 Dual format image code must properly handle all three FDT passing methods:
6236 - raw FDT blob passed
6237 - FDT blob embedded in the legacy uImage
6238 - FDT blob embedded in the new uImage
6240 This patch enables proper raw FDT handling when no FIT imaeg support
6241 is compiled in. This is a bit tricky as we must dected FIT format even
6242 when FIT uImage handling is not enabled as both FIT uImages and raw FDT
6243 blobs use tha same low level format (libfdt).
6245 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6247 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
6248 Author: Marian Balakowicz <m8@semihalf.com>
6249 Date: Wed Feb 27 11:02:26 2008 +0100
6251 [new uImage] POWERPC: Add image_get_fdt() routine
6253 FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
6254 (3) or embedded in the new uImage. For the (2) case embedding image must be
6255 verified before we get FDT from it. This patch factors out legacy image
6256 specific verification routine to the separate helper routine.
6258 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6259 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6261 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
6262 Author: Marian Balakowicz <m8@semihalf.com>
6263 Date: Wed Feb 27 11:02:07 2008 +0100
6265 [new uImage] Add image_get_kernel() routine
6267 Legacy image specific verification is factored out to a separate helper
6268 routine to keep get_kernel() generic and simple.
6270 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6271 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6273 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
6274 Author: Marian Balakowicz <m8@semihalf.com>
6275 Date: Wed Feb 27 11:01:04 2008 +0100
6277 [new uImage] Move image verify flag to bootm_headers structure
6279 Do not pass image verification flag directly to related routines.
6280 Simplify argument passing and move it to the bootm_header structure which
6281 contains curently processed image specific data and is already being passed
6282 on the argument list.
6284 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6285 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6287 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
6288 Author: Marian Balakowicz <m8@semihalf.com>
6289 Date: Wed Feb 27 11:00:47 2008 +0100
6291 [Makefile] Sort COBJS in lib_<arch> Makefiles
6293 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6295 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
6296 Author: Marian Balakowicz <m8@semihalf.com>
6297 Date: Wed Feb 27 11:00:47 2008 +0100
6299 [new uImage] Optimize gen_get_image() flow control
6301 When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
6302 to do, update its control flow to better reflect that simple case.
6304 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6305 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6307 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
6308 Author: Marian Balakowicz <m8@semihalf.com>
6309 Date: Mon Feb 4 08:28:17 2008 +0100
6311 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
6313 PPC specific FDT blob handling code is divided into two separate routines:
6315 get_fdt() - find and verify a FDT blob (either raw or image embedded)
6316 fdt_relocate() - move FDT blob to within BOOTMAP if needed
6318 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6319 Acked-by: Kumar Gala <galak@kernel.crashing.org>
6321 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
6322 Author: Jon Loeliger <jdl@freescale.com>
6323 Date: Mon Feb 25 13:13:37 2008 -0600
6325 86xx: Fix renamed GUR symbols in sbc8641d board.
6327 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
6328 (86xx: Fix GUR PCI config registers properly), we should have
6329 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
6330 symbols in the sbc8641d board as well. Fix this oversight.
6332 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6334 commit 64cd594e623c39f73964d18787763e4533f791f7
6335 Author: Stefan Roese <sr@denx.de>
6336 Date: Mon Feb 25 16:50:48 2008 +0100
6338 ppc4xx: Fix acadia_nand build problem
6340 Don't include testdram() on NAND-booting target acadia_nand. This saves
6341 a few bytes and makes the target build clean again.
6343 Signed-off-by: Stefan Roese <sr@denx.de>
6345 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
6346 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6347 Date: Sun Feb 24 23:03:12 2008 +0000
6349 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
6351 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6353 commit 724902c8464e610642b3a170278b99710325888e
6354 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6355 Date: Sun Feb 24 23:03:11 2008 +0000
6357 arm-imx: Fix registers definition
6359 Sync registers definition with linux
6361 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6363 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
6364 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6365 Date: Sun Feb 24 23:03:10 2008 +0000
6367 actua1/actua2/actua3: Fix multipleunused variable
6370 actux1.c: In function 'checkboard':
6371 actux1.c:92: warning: unused variable 'revision'
6374 actux2.c: In function 'checkboard':
6375 actux2.c:100: warning: unused variable 's'
6376 actux2.c:99: warning: unused variable 'revision'
6377 actux2.c: In function 'reset_phy':
6378 actux2.c:130: warning: unused variable 'i'
6381 actux3.c: In function 'checkboard':
6382 actux3.c:114: warning: unused variable 'revision'
6384 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6386 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
6387 Author: Marian Balakowicz <m8@semihalf.com>
6388 Date: Mon Feb 4 08:28:09 2008 +0100
6390 [new uImage] Add dual format uImage support framework
6392 This patch adds framework for dual format images. Format detection is added
6393 and the bootm controll flow is updated to include cases for new FIT format
6396 When the legacy (image_header based) format is detected appropriate
6397 legacy specific handling is invoked. For the new (FIT based) format uImages
6398 dual boot framework has a minial support, that will only print out a
6399 corresponding debug messages. Implementation of the FIT specific handling will
6400 be added in following patches.
6402 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6404 commit b29661fc1151077776454288051bc9a488351ce8
6405 Author: Wolfgang Denk <wd@denx.de>
6406 Date: Sun Feb 24 15:21:36 2008 +0100
6408 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
6410 Signed-off-by: Wolfgang Denk <wd@denx.de>
6412 commit 00b48a48424894daa589d166d73277830b1c6ac4
6413 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6414 Date: Sat Feb 23 12:15:56 2008 +0100
6416 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
6418 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6420 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
6421 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6422 Date: Sat Feb 23 17:24:16 2008 +0900
6424 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
6426 ----------------------------------------------------------------
6427 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
6429 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
6432 GCC can be made to warn about usage of long long types with ISO C90
6433 (-ansi), but only with -pedantic. You can write this in a way that even
6434 then it doesn't cause warnings, namely by:
6437 __extension__ typedef __signed__ long long __s64;
6438 __extension__ typedef unsigned long long __u64;
6441 The __extension__ keyword in front of this switches off any pedantic
6442 warnings for this expression.
6444 Signed-off-by: Olaf Hering <olh@suse.de>
6445 Cc: <linux-arch@vger.kernel.org>
6446 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
6447 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6448 ----------------------------------------------------------------
6450 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6452 commit 208acd112e6517b21fc30c420396902b103563ac
6453 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6454 Date: Sat Feb 23 17:07:57 2008 +0900
6456 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
6458 This will reduce the build time.
6460 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6462 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
6463 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6464 Date: Sat Feb 23 17:05:00 2008 +0900
6466 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
6468 This will reduce the build time.
6470 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6472 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
6473 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6474 Date: Sat Feb 23 16:58:41 2008 +0900
6476 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
6478 This reduces the build time by ~10%. Here's the gth2_config example.
6481 real 0m31.441s 0m27.833s
6482 user 0m24.766s 0m23.045s
6483 sys 0m10.425s 0m7.468s
6485 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6487 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
6488 Author: Marcel Moolenaar <marcelm@juniper.net>
6489 Date: Fri Feb 22 10:48:07 2008 -0800
6491 make define2mk.sed work on FreeBSD
6493 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
6494 the define2mk.sed script was identified as the source of the link
6495 failure on FreeBSD. The problem is that sed(1) does not always support
6496 the '+' operator. It isn't on FreeBSD. The attach patch implements the
6497 equivalent, using the '*' operator instead and should work everywhere.
6499 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
6501 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
6502 Author: Detlev Zundel <dzu@denx.de>
6503 Date: Fri Feb 22 17:21:32 2008 +0100
6505 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
6507 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
6508 final traces of long-deprecated "ramdisk" kernel parm") makes these
6511 Signed-off-by: Detlev Zundel <dzu@denx.de>
6513 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
6514 Author: Larry Johnson <lrj@acm.org>
6515 Date: Thu Feb 21 13:58:16 2008 -0500
6517 LM75 bug fix for negative temperatures
6519 When the LM75 temperature sensor measures a temperature below 0 C, the
6520 current driver does not perform sign extension, so the result returned is
6521 256 C too high. This patch fixes the problem.
6523 Signed-off-by: Larry Johnson <lrj@acm.org>
6525 commit 5a910c224b13e413bda41922379add6d75c32da3
6526 Author: Heiko Schocher <hs@denx.de>
6527 Date: Thu Feb 21 18:33:45 2008 +0100
6529 IDS8247: update MAINTAINER entry.
6531 Signed-off-by: Heiko Schocher <hs@denx.de>
6533 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
6534 Author: Heiko Schocher <hs@denx.de>
6535 Date: Thu Feb 21 18:31:15 2008 +0100
6537 Fix device tree for mgsuvd board.
6539 Rename the "scc" node in "ethernet" for the mgsuvd board.
6541 Signed-off-by: Heiko Schocher <hs@denx.de>
6543 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
6544 Author: Yuri Tikhonov <yur@emcraft.com>
6545 Date: Thu Feb 21 14:23:42 2008 +0100
6547 lwmon5: enable hardware watchdog
6549 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
6550 causing it to reboot the board if U-Boot does a long busy-wait with
6551 udelay(). Thus, for these boards we have to restart WD more
6554 This patch splits the busy-wait udelay() into smaller, predefined,
6555 intervals, so that the watchdog timer may be resetted with the
6556 configurable (CONFIG_WD_PERIOD) interval.
6558 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
6560 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
6561 Author: Anatolij Gustschin <agust@denx.de>
6562 Date: Thu Feb 21 12:52:29 2008 +0100
6564 ppc4xx: Support for ATI Radeon 9200 card on sequoia
6566 Adds configuration option for ATI Radeon 9200 card
6567 support to sequoia config file. If CONFIG_VIDEO
6568 is enabled, TEXT_BASE should be changed to 0xFFF80000.
6570 Signed-off-by: Anatolij Gustschin <agust@denx.de>
6572 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
6573 Author: Kumar Gala <galak@kernel.crashing.org>
6574 Date: Mon Feb 18 08:18:07 2008 -0600
6576 Remove duplicate defines for ARRAY_SIZE
6578 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
6579 the define in common.h.
6581 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6583 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
6584 Author: Kumar Gala <galak@kernel.crashing.org>
6585 Date: Mon Feb 18 08:09:37 2008 -0600
6587 ppc: Allow boards to specify effective amount of memory
6589 For historical reasons we limited the stack to 256M because some boards
6590 could only map that much via BATS. However newer boards are capable of
6591 mapping more memory (for example 85xx is capable of doing up to 2G).
6593 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6595 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
6596 Author: Mike Frysinger <vapier@gentoo.org>
6597 Date: Mon Feb 18 05:24:13 2008 -0500
6599 include autoconf.mk before any other .mk files
6601 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
6602 those .mk files can have make if statements based on the current config.
6604 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6606 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
6607 Author: Mike Frysinger <vapier@gentoo.org>
6608 Date: Mon Feb 18 05:10:07 2008 -0500
6610 error check autoconf.mk generation
6612 If any of the steps for generating autoconf.mk fail currently, they go
6613 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
6614 This is simpler and more robust than placing '|| exit $$?' after every line.
6616 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6618 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
6619 Author: Stefano Babic <sbabic@denx.de>
6620 Date: Mon Feb 18 08:03:51 2008 +0100
6622 Fix bug in dependency checking
6624 By adding VERSION_FILE to the PHONY targets the script
6625 /tools/setlocalversion is always called and version_autogenerated.h
6626 is replaced only if the script find a modified source file.
6628 Signed-off-by: Stefano Babic <sbabic@denx.de>
6630 commit 98ba144ccc912eee90dd42699f023c497ce774c6
6631 Author: Kyungmin Park <kmpark@infradead.org>
6632 Date: Mon Feb 18 14:35:43 2008 +0900
6634 Fix GPMC CS2 memory setup at apollon
6636 It disables the current map first
6638 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
6640 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
6641 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6642 Date: Sun Feb 17 23:52:46 2008 +0100
6644 uli526x: Fix multiple differ in signedness and parentheses around comparison
6646 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6648 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
6649 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6650 Date: Sun Feb 17 16:58:04 2008 +0100
6652 MIPS: Fix CFG_NO_FLASH support
6654 - Fix flash_init call when CFG_NO_FLASH is used
6655 - Remove no more needed flash.c for qemu-mips
6657 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6659 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
6660 Author: Mike Frysinger <vapier@gentoo.org>
6661 Date: Sat Feb 16 02:40:18 2008 -0500
6663 easylogo: clean up some more and add -r (rgb) support
6665 Michael Hennerich added support for outputting an image in RGB format rather
6666 than forcing YUYV all the time. This makes obvious sense if the display you
6667 have takes RGB input rather than YUYV.
6669 Rather than hack in support for options, I've converted it to use getopt and
6670 cleaned up the argument parsing in the process.
6672 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
6673 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6675 commit f65c98129ccada3f7caf97d80395a95b84e911de
6676 Author: Mike Frysinger <vapier@gentoo.org>
6677 Date: Sat Feb 16 02:12:37 2008 -0500
6679 Makefile: add target for $(LDSCRIPT)
6681 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
6682 then change into the board directory and try and create it. This allows you
6683 to generate the linker script on the fly based upon board defines (like the
6684 Blackfin boards do).
6686 There should be no regressions due to this change as the normal case is to
6687 already have a u-boot.lds file. If that's the case, then there's nothing to
6688 generate, and so make will always exit. The fix here is that if the linker
6689 script does not exist, the implicit rules take over and attempt to guess how
6690 to generate the file.
6692 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6694 commit 5583cbf736474ef754e128a54fb78632f57b48fd
6695 Author: Marian Balakowicz <m8@semihalf.com>
6696 Date: Thu Feb 21 17:27:49 2008 +0100
6698 [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
6700 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6702 commit 2242f5369822bc7780db95c47985bb408ea9157b
6703 Author: Marian Balakowicz <m8@semihalf.com>
6704 Date: Thu Feb 21 17:27:41 2008 +0100
6706 [new uImage] Rename and move print_image_hdr() routine
6708 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6710 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
6711 Author: Marian Balakowicz <m8@semihalf.com>
6712 Date: Thu Feb 21 17:20:20 2008 +0100
6714 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
6716 Introducing routines for parsing new uImage format bootm arguments:
6717 [<addr>]#<conf> - configuration specification
6718 [<addr>]:<subimg> - subimage specification
6720 New format images can contain multiple subimages of the same type. For example
6721 a single new format image file can contain three kernels, two ramdisks and a
6722 couple of FDT blobs. Subimage and configuration specifications are extensions
6723 to bootm (and other image-related commands) arguments' syntax that allow to
6724 specify which particular subimage should be operated on.
6726 Subimage specification is used to denote a particular subimage. Configurations
6727 are a bit more complex -- they are used to define a particualr booting setup,
6728 for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
6731 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6733 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
6734 Author: Marian Balakowicz <m8@semihalf.com>
6735 Date: Thu Feb 21 17:20:19 2008 +0100
6737 [new uImage] Add gen_get_image() routine
6739 This routine assures that image (whether legacy or FIT) is not
6740 in a special dataflash storage.
6742 If image address is a dataflash address image is moved to system RAM.
6744 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6746 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
6747 Author: Marian Balakowicz <m8@semihalf.com>
6748 Date: Thu Feb 21 17:20:18 2008 +0100
6750 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
6752 New uImage format (Flattened Image Tree) requires libfdt
6753 functionality, print out error message if CONFIG_OF_LIBFDT
6756 New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
6757 This commit turns it on by default.
6759 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
6761 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
6762 Author: Michael Schwingen <michael@schwingen.org>
6763 Date: Mon Feb 18 23:16:35 2008 +0100
6765 CFI: Do not use uninitialized cmd_reset
6767 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
6770 From a short test, it looks like AMD-style flash roms treat *any* unknown
6771 command write as a reset, at least when in CFI Query mode, so issuing the
6772 Intel reset command to AMD-style flashs seems safe (from the small sample I
6773 have), plus the 3-cycle magic sequence should kick the state machine into
6774 the right state even without a reset command. Since the AMD-style flashs
6775 require the unlock sequence for real operation, I chose to try the AMD reset
6776 command first, so that Intel flashs do no see an invalid command prior to
6779 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
6780 plus Intel StrataFlash.
6782 Signed-off-by: Michael Schwingen <michael@schwingen.org>
6783 Signed-off-by: Stefan Roese <sr@denx.de>
6785 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
6786 Author: Rafal Jaworowski <raj@semihalf.com>
6787 Date: Thu Feb 21 11:56:44 2008 +0100
6789 API: Add (c) and licensing notice to the public API header.
6791 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
6793 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
6794 Author: Yuri Tikhonov <yur@emcraft.com>
6795 Date: Thu Feb 21 11:06:07 2008 +0100
6797 Fix CPU POST test failure
6799 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
6800 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
6801 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
6802 This patch just saves the CR value before running the test code, so allowing
6803 it to do anything it wants with CR.
6805 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
6806 Acked-by: Yuri Tikhonov <yur@emcraft.com>
6809 commit d5908b093955415f3d340706378b991f911af671
6810 Author: Jon Loeliger <jdl@freescale.com>
6811 Date: Wed Feb 20 15:26:51 2008 -0600
6813 8610HPCD: Document the flashbank selection switches.
6815 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6817 commit a551cee99ad1d1da20fd23ad265de47448852f56
6818 Author: Jon Loeliger <jdl@freescale.com>
6819 Date: Wed Feb 20 14:22:26 2008 -0600
6821 86xx: Fix GUR PCI config registers properly.
6823 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
6824 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
6825 botched it due to not realizing that 8610 and 8641 had different
6826 Global Utility Register defintions, one of which was like 85xx,
6827 and the other wasn't. Correct this problem by introducing two
6828 symbols, one for each 86xx SoC, but neither of which is named
6831 My bad. Lovely Wednesday with git bisect. You know.
6833 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6835 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
6836 Author: Jon Loeliger <jdl@freescale.com>
6837 Date: Wed Feb 20 12:24:11 2008 -0600
6839 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
6841 Without an actual supported video card hooked up, enabling
6842 the CONFIG_VIDEO by default just makes it look broken by
6843 routing all console output to the video card. Don't.
6845 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6847 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
6848 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6849 Date: Wed Jan 30 15:08:15 2008 -0600
6851 ColdFire: Fix missing code flash size for M5485EVB
6853 Signed-off-by: James Mahan <kmahan@freescale.com>
6854 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6856 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
6857 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
6858 Date: Wed Jan 30 15:04:42 2008 -0600
6860 ColdFire: Fix 5282 and 5271 interrupt mask bit
6862 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6864 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
6865 Author: Jon Loeliger <jdl@freescale.com>
6866 Date: Tue Feb 19 12:31:08 2008 -0600
6868 8610HPCD: Fix typos in two PCI setup registers.
6870 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
6871 were erroneously present as 85xx names and values, leftover from
6872 the clone wars. Fix this by removing the 85xx cruft from the
6875 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6877 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
6878 Author: Jon Loeliger <jdl@freescale.com>
6879 Date: Mon Feb 18 14:01:56 2008 -0600
6881 86xx: Convert sbc8641d to use libfdt.
6883 This is the proper fix for a missing closing brace in the function
6884 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
6885 The ft_cpu_setup() function in mpc8641hpcn.c should have been
6886 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
6887 but was missed. Only, the sbc8641d was nominally still using it.
6888 It all got ripped out, and the funcality that was in ft_board_setup()
6889 was refactored to remove the CPU portions into the new file
6890 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
6892 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
6894 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6896 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
6897 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6898 Date: Sun Feb 17 23:35:31 2008 +0100
6900 mpc86xx: Fix unused variable 'config' and 'immap'
6902 and remove useless CONFIG_DDR_INTERLEAVE
6904 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6906 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
6907 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6908 Date: Sun Feb 17 23:03:36 2008 +0100
6910 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
6912 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6914 commit b6f29c84c208a091f95a10cbc9852d729659ba20
6915 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6916 Date: Sun Feb 17 14:15:31 2008 +0100
6918 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
6920 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6922 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
6923 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6924 Date: Sun Feb 17 14:15:32 2008 +0100
6926 pxa: fix assignment from incompatible pointer type
6928 fix mmc_bread function prototype
6930 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6932 commit 64d792063fff90b8118179b092feee09fe5cae13
6933 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6934 Date: Sun Feb 17 14:15:30 2008 +0100
6936 at91cap9adk: fix implicit declaration of function 'eth_init'
6938 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6940 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
6941 Author: Wolfgang Denk <wd@denx.de>
6942 Date: Sun Feb 17 15:43:44 2008 +0100
6944 Remove files added by mistake, update CHANGELOG.
6946 Signed-off-by: Wolfgang Denk <wd@denx.de>
6948 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
6949 Author: Mike Nuss <mike@terascala.com>
6950 Date: Wed Feb 6 11:10:11 2008 -0500
6952 PPC440EPx: Optionally enable second I2C bus
6954 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
6955 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
6956 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
6958 Signed-off-by: Mike Nuss <mike@terascala.com>
6959 Cc: Stefan Roese <sr@denx.de>
6961 commit ef5b4f221c22d05770878513951745f236b5b43f
6962 Author: Niklaus Giger <niklaus.giger@netstal.com>
6963 Date: Tue Feb 5 10:26:44 2008 +0100
6965 ppc4xx: HCU4/5. Cleanup configs
6967 - hcu4.h: Removed define of CONFIG_PPC405GPr
6968 - Corrected phy addresses
6969 - Fix boot variables
6970 - Respect line length of 80 chars
6972 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
6974 commit 74973126d1be63ac75bdc192f46234dca3a7c421
6975 Author: Niklaus Giger <niklaus.giger@netstal.com>
6976 Date: Tue Feb 5 11:31:28 2008 +0100
6978 ppc4xx: HCU4/5. Cleanups
6980 - Fix some coding style violations.
6981 - Use in/out_u16/32 where appropriate.
6982 - Use register names from ppc405.h.
6983 - Fix trace useage for Lauterbach.
6984 - Remove obsolete generation HCU2.
6985 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
6987 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
6989 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
6990 Author: Niklaus Giger <niklaus.giger@netstal.com>
6991 Date: Tue Feb 5 10:26:41 2008 +0100
6993 ppc4xx: PPC405GPr fix missing register definitions
6995 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
6997 commit 214398d9cb22268d9d4f7563359edca0f78297a2
6998 Author: Larry Johnson <lrj@acm.org>
6999 Date: Fri Jan 18 21:49:05 2008 -0500
7001 ppc4xx: Beautify configuration files for Sequoia and Korat boards
7003 Signed-off-by: Larry Johnson <lrj@acm.org>
7005 commit 30c6a241e88499f536e86d325759e29ba00ff67f
7006 Author: Anatolij Gustschin <agust@denx.de>
7007 Date: Fri Feb 15 20:09:01 2008 +0100
7009 Wipe out assembler warnings while compiling x86 biosemu
7011 This patch tries to get rid of some assembler warnings about
7012 changed .got2 section type while compiling x86 bios emulator
7015 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7017 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
7018 Author: Wolfgang Denk <wd@denx.de>
7019 Date: Fri Feb 15 00:57:09 2008 +0100
7021 Prepare v1.3.2-rc1 release candidate
7023 commit f33e9653c9c09868995d788511d573771c209fe5
7024 Author: Anatolij Gustschin <agust@denx.de>
7025 Date: Fri Feb 15 00:13:20 2008 +0100
7027 Fix compile warning on lib_ppc/board.c
7029 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7031 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
7032 Author: Anatolij Gustschin <agust@denx.de>
7033 Date: Thu Feb 14 18:22:04 2008 +0100
7035 Add Radeon Mobility 9200 pci device id to the radeon driver
7037 This patch extends PCI device id table of the
7038 radeon driver so that the driver will also support
7039 Radeon Mobility 9200 (M9+) based boards.
7041 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7043 commit 1b8607e1f7143548c6062c28371449ec69588c00
7044 Author: Anatolij Gustschin <agust@denx.de>
7045 Date: Thu Feb 14 18:19:50 2008 +0100
7047 Extend ATI Radeon driver to support more video modes
7049 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
7050 800x600, 640x480 at 24, 16 and 8 bpp.
7052 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7054 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
7055 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7056 Date: Sun Feb 10 17:05:20 2008 +0100
7058 xsengine: fix typo and few coding style
7060 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7062 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
7063 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
7064 Date: Fri Feb 8 21:25:58 2008 +0100
7066 Fix wrong memory limit calculation in memory-test
7068 If the length of the memory address range passed to the "mtest" command is
7069 not of the form 2^x - 1, not all address lines are tested. This bug is
7070 inherited from the original software at
7071 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
7074 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
7076 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
7077 Author: Wolfgang Denk <wd@denx.de>
7078 Date: Fri Feb 15 00:11:39 2008 +0100
7080 Coding STyle cleanup.
7082 Signed-off-by: Wolfgang Denk <wd@denx.de>
7084 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
7085 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7086 Date: Tue Feb 5 13:30:43 2008 +0900
7088 sh: Fix register address of SH7722
7090 The address of SH7722 is wrong by old document.
7091 This patch fixes this problem.
7093 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7095 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
7096 Author: Mike Frysinger <vapier@gentoo.org>
7097 Date: Mon Feb 4 17:44:23 2008 -0500
7099 only update version header as needed
7101 Constantly rebuilding the version header will force useless relinking, so we
7102 simply need to compare the new header with the existing one before updating
7105 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7107 commit 208447f8e953f347425eb92c8e28d59e6d911363
7108 Author: Mike Frysinger <vapier@gentoo.org>
7109 Date: Mon Jan 28 05:56:19 2008 -0500
7111 Do not specify a CROSS_COMPILE default when executing size
7113 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7115 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
7116 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
7117 Date: Wed Feb 13 11:19:19 2008 +0100
7119 Fix return value of mtest when CFG_ALT_MEMTEST set
7121 Fix a missing return statement from a non-void function.
7123 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
7125 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
7126 Author: Timur Tabi <timur@freescale.com>
7127 Date: Wed Jan 9 14:35:26 2008 -0600
7129 85xx, 86xx: Determine I2C clock frequencies and store in global_data
7131 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
7133 Update the get_clocks() function in 85xx and 86xx to determine the I2C
7134 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
7136 Signed-off-by: Timur Tabi <timur@freescale.com>
7138 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
7139 Author: Wolfgang Denk <wd@denx.de>
7140 Date: Thu Feb 14 23:18:01 2008 +0100
7142 TQM834x: clean up configuration
7144 Get board name consistent with Linux and elsewhere;
7145 get rid of local network definitions etc.
7147 Signed-off-by: Wolfgang Denk <wd@denx.de>
7149 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
7150 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7151 Date: Thu Feb 14 08:02:12 2008 +0100
7153 TFTP: fix search of ':' in BootFile
7155 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7157 commit 0bc9efada170096c6b273f19165e32936d330d80
7158 Author: Wolfgang Denk <wd@denx.de>
7159 Date: Thu Feb 14 22:46:55 2008 +0100
7161 Coding style cleanup; update CHANGELOG.
7163 Signed-off-by: Wolfgang Denk <wd@denx.de>
7165 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
7166 Author: Wolfgang Denk <wd@denx.de>
7167 Date: Thu Feb 14 22:43:22 2008 +0100
7169 PPC: Use r2 instead of r29 as global data pointer
7171 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
7172 will refuse to use load/store multiple insns; instead, it issues a
7173 list of simple load/store instructions upon function entry and exit,
7174 resulting in bigger code size, which in turn makes the build for a
7179 Signed-off-by: Wolfgang Denk <wd@denx.de>
7181 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
7182 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
7183 Date: Wed Jan 30 09:08:49 2008 +0100
7185 ARM: make the machid configurable via the environment
7187 If the variable "machid" exists, let do_bootm_linux use that instead
7188 of bd->bi_arch_number.
7190 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
7192 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
7193 Author: Vlad Lungu <vlad@comsys.ro>
7194 Date: Wed Jan 23 16:34:46 2008 +0200
7196 Use #ifdef CONFIG_FSLDMAFEC
7198 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
7201 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
7203 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
7204 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7205 Date: Sat Jan 19 10:25:59 2008 +0900
7207 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
7209 Current MII_DEBUG is confusing in two ways. One is useless define-then-
7210 undef at the top of the file. The other is there is only one debug() in
7211 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
7212 While there are many useful printf()/puts() debug codes, but they are for
7213 DEBUG, not for MII_DEBUG.
7215 This patch tries to put them all together into MII_DEBUG and debug().
7217 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
7219 commit 751b9b5189f3274b03c809172631316d6b002c82
7220 Author: Kyungmin Park <kmpark@infradead.org>
7221 Date: Thu Jan 17 16:43:25 2008 +0900
7223 OneNAND Initial Program Loader (IPL) support
7225 This patch enables the OneNAND boot within U-Boot.
7226 Before this work, we used another OneNAND IPL called X-Loader based
7227 on open source. With this work, we can build the oneboot.bin image
7228 without other program.
7230 The build sequence is simple.
7231 First, it compiles the u-boot.bin
7232 Second, it compiles OneNAND IPL
7233 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
7234 The mechanism is similar with NAND boot except it boots from itself.
7236 Another thing is that you can only use the OneNAND IPL only to work
7237 other bootloader such as RedBoot and so on.
7239 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
7241 commit 21f6f9636f0e978397548751347425fbf8d42bb3
7242 Author: Andy Fleming <afleming@freescale.com>
7243 Date: Wed Jan 16 13:06:59 2008 -0600
7245 Fix CONFIG_MMC usage in fat code
7247 A #if statement in fat.c depended on CONFIG_MMC, instead of
7248 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
7249 as "1" rather than just defined. Now it's better.
7251 Signed-off-by: Andy Fleming <afleming@freescale.com>
7253 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
7254 Author: Rafal Jaworowski <raj@semihalf.com>
7255 Date: Tue Jan 15 12:52:31 2008 +0100
7257 ppc: Refactor cache routines, so there is only one common set.
7259 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
7261 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
7262 Author: Jon Loeliger <jdl@jdl.com>
7263 Date: Wed Jan 23 15:55:02 2008 -0600
7265 86xx: Fix compilation warning in sys_eprom.c
7267 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
7269 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7271 commit 65230107025733e89e28fd5e5cfd916d4953c28a
7272 Author: Haavard Skinnemoen <hskinnemoen at>
7273 Date: Fri Feb 22 11:40:50 2008 +0000
7275 Move AT91RM9200DK board support under board/atmel
7277 We already have a vendor subdir for Atmel, so we should use it.
7279 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
7281 commit 6d0943a6be99977d6d853d51749e9963d68eb192
7282 Author: Andreas Engel <andreas.engel@ericsson.com>
7283 Date: Mon Jan 14 09:06:52 2008 +0000
7285 ARM: cleanup duplicated exception handlingcode
7287 Move duplicated exception handling code into lib_arm.
7289 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
7291 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
7292 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
7293 Date: Fri Feb 1 10:09:03 2008 +0000
7295 Support for Artila M-501 starter kit
7297 Kimmo Leppala / Sysart and
7298 Timo Tuunainen / Sysart
7300 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
7301 Author: Stelian Pop <stelian@popies.net>
7302 Date: Mon Feb 11 10:50:19 2008 +0000
7306 ---------------------------------
7308 read_dataflash() takes a signed char pointer as a parameter. Silence a
7309 few warnings dues to incorrect parameter types in env_dataflash.c.
7311 Signed-off-by: Stelian Pop <stelian@popies.net>
7313 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
7314 Author: Stelian Pop <stelian@popies.net>
7315 Date: Thu Feb 7 09:42:57 2008 +0000
7317 AT91CAP9 support : move board files to Atmel vendor directory.
7319 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
7321 Signed-off-by: Stelian Pop <stelian@popies.net>
7323 commit 7263ef191b87da94768f762c7093bedeb70db98f
7324 Author: Stelian Pop <stelian at>
7325 Date: Thu Jan 3 21:15:56 2008 +0000
7327 AT91CAP9 support : MACB changes
7329 Signed-off-by: Stelian Pop <stelian <at> popies.net>
7330 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
7332 commit 6afcabf11d7321850f4feaadfee841488ace54c5
7333 Author: Stelian Pop <stelian@popies.net>
7334 Date: Thu Feb 7 16:37:54 2008 +0000
7336 AT91CAP9 support : board/ files
7338 Signed-off-by: Stelian Pop <stelian@popies.net>
7340 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
7341 Author: Stelian Pop <stelian at>
7342 Date: Wed Jan 30 21:15:54 2008 +0000
7344 AT91CAP9 support : cpu/ files
7346 Signed-off-by: Stelian Pop <stelian <at> popies.net>
7348 commit fa506a926cec348805143576c941f8e61b333cc0
7349 Author: Stelian Pop <stelian@popies.net>
7350 Date: Thu Jan 31 21:15:53 2008 +0000
7352 AT91CAP9 support : include/ files
7354 Signed-off-by: Stelian Pop <stelian@popies.net>
7356 commit 20b197c6f2799af399a68f96a1aff543a75621b8
7357 Author: Stelian Pop <stelian@popies.net>
7358 Date: Sun Jan 20 19:49:21 2008 +0000
7360 AT91CAP9 support : build integration
7362 Signed-off-by: Stelian Pop <stelian@popies.net>
7364 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
7365 Author: Stelian Pop <stelian@popies.net>
7366 Date: Sun Jan 20 21:07:00 2008 +0000
7368 Improve DataFlash CS definition.
7370 Use a structure instead of the error prone unnamed array to
7371 define the possible dataflash banks.
7373 Signed-off-by: Stelian Pop <stelian@popies.net>
7375 commit a6cdd21b56014208706238712a853a9e9a0a2290
7376 Author: Stelian Pop <stelian@popies.net>
7377 Date: Sat Jan 19 21:09:35 2008 +0000
7379 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
7381 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
7383 cpu/arm926ejs/start.o: In function `cpu_init_crit':
7384 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
7386 Signed-off-by: Stelian Pop <stelian@popies.net>
7388 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
7389 Author: Peter Pearse <peter.pearse@arm.com>
7390 Date: Fri Feb 1 16:50:24 2008 +0000
7392 Fix timer overflow in DaVinci
7393 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
7395 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
7396 Author: Peter Pearse <peter.pearse@arm.com>
7397 Date: Fri Feb 1 16:49:08 2008 +0000
7399 Update board NetStar
7400 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
7402 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
7403 Author: Niklaus Giger <niklaus.giger@netstal.com>
7404 Date: Tue Feb 5 10:26:42 2008 +0100
7406 ppc4xx: HCU4/5. Fix make O=../xx
7408 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7410 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
7411 Author: Larry Johnson <lrj@acm.org>
7412 Date: Tue Jan 22 08:51:59 2008 -0500
7414 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
7416 Signed-off-by: Larry Johnson <lrj@acm.org>
7418 commit fe891ecf4d187e9d11dde869ed4623af52b54451
7419 Author: Hiroshi Ito <ito@mlb.co.jp>
7420 Date: Thu Jan 31 18:35:04 2008 +0900
7422 NFS Timeout with large files.
7424 Retry to send NFS packet before reaching timeout.
7426 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
7428 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
7429 Author: Johannes Stezenbach <js@sig21.net>
7430 Date: Tue Jan 29 00:11:25 2008 +0100
7432 Add dependencies to avoid race conditions with parallel make.
7434 Signed-off-by: Johannes Stezenbach <js@sig21.net>
7436 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
7437 Author: Mike Frysinger <vapier@gentoo.org>
7438 Date: Mon Jan 28 05:46:01 2008 -0500
7440 Mark board_init_[fr] as noreturn
7442 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7444 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
7445 Author: Mike Frysinger <vapier@gentoo.org>
7446 Date: Mon Jan 28 05:28:50 2008 -0500
7448 Only use TEXT_BASE if defined by the board
7450 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7452 commit 1b769881750030f10743808b9d6013e11f559350
7453 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7454 Date: Fri Jan 25 07:54:47 2008 +0100
7456 Fix remaining CONFIG_COMMANDS
7461 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7463 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
7464 Author: Niklaus Giger <niklaus.giger@netstal.com>
7465 Date: Mon Jan 21 16:46:00 2008 +0100
7467 Add *~ to .gitignore
7469 One should never add a backup file ending in with ~ to the git repository.
7471 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7473 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
7474 Author: Kumar Gala <galak@kernel.crashing.org>
7475 Date: Thu Jan 17 00:02:10 2008 -0600
7477 Remove duplicate defines for ARRAY_SIZE
7479 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7481 commit c77ce474b1c57b13e9d36d9830f147966c143694
7482 Author: Stelian Pop <stelian@popies.net>
7483 Date: Mon Jan 14 22:08:14 2008 +0100
7485 Fix incorrect address test in AT91F_DataflashSelect().
7487 Signed-off-by: Stelian Pop <stelian@popies.net>
7489 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
7490 Author: Kumar Gala <galak@kernel.crashing.org>
7491 Date: Wed Feb 13 15:09:58 2008 -0600
7493 Fix building of fdt_support.c if DEBUG set
7495 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7497 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
7498 Author: Jon Loeliger <jdl@freescale.com>
7499 Date: Tue Feb 12 14:53:28 2008 -0600
7501 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
7503 These replace direct structure references for IMMR sections.
7505 Signed-off-by: Jon Loeliger <jdl@freescale.com>
7507 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
7508 Author: Wolfgang Denk <wd@denx.de>
7509 Date: Tue Feb 12 00:45:06 2008 +0100
7511 Get rid of "#undef DEBUG" from board config files.
7513 Signed-off-by: Wolfgang Denk <wd@denx.de>
7515 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
7516 Author: Timur Tabi <timur@freescale.com>
7517 Date: Tue Jan 15 17:09:41 2008 -0600
7519 Remove #undef DEBUG from MPC83xx board header files
7521 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
7522 The inclusion of this line makes it impossible to enable debug code in
7523 other source files, because "#define DEBUG" typically needs to be defined
7524 before any header files are included.
7526 Signed-off-by: Timur Tabi <timur@freescale.com>
7528 commit 69018ce2e086e9caf35b914d675b82bc4888f077
7529 Author: Kumar Gala <galak@kernel.crashing.org>
7530 Date: Thu Jan 17 08:25:45 2008 -0600
7532 QE: Move FDT support into a common file
7534 Move the flat device tree setup for QE related devices into
7535 a common file shared between 83xx & 85xx platforms that have QE's.
7537 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7539 commit 5cf746c303710329f8040d9c62ee354313e3e91f
7540 Author: Marian Balakowicz <m8@semihalf.com>
7541 Date: Thu Jan 31 13:59:09 2008 +0100
7543 [new uImage] Move kernel data find code to get_kernel() routine
7545 Verification of the kernel image (in old format) and finding kernel
7546 data is moved to a dedicated routine. The routine will also hold
7547 support for, to be added, new image format.
7549 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7551 commit 7b325454fd231d4273de3fe373850f777fb086bf
7552 Author: Marian Balakowicz <m8@semihalf.com>
7553 Date: Thu Jan 31 13:58:20 2008 +0100
7555 [new uImage] Cleanup FDT handling in PPC do_boot_linux()
7557 Move FDT blob finding and relocation to a dedicated
7558 get_fdt() routine. It increases code readability and
7559 will make adding support for new uImage format easier.
7561 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7563 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
7564 Author: Marian Balakowicz <m8@semihalf.com>
7565 Date: Thu Jan 31 13:58:13 2008 +0100
7567 [new uImage] Cleanup do_botm_linux() boot allocations
7569 This patch moves common pre-boot allocation steps shared between PPC
7570 and M68K to a helper routines:
7573 - get_boot_sp_limit()
7578 - set_clocks_in_mhz()
7580 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7582 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
7583 Author: Marian Balakowicz <m8@semihalf.com>
7584 Date: Thu Jan 31 13:57:17 2008 +0100
7586 [new uImage] Move ramdisk loading to a common routine
7588 Ramdisk loading code, including initrd_high variable handling,
7589 was duplicated for PPC and M68K platforms. This patch creates
7590 common helper routine that is being called from both platform
7591 do_bootm_linux() routines.
7593 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7595 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
7596 Author: Marian Balakowicz <m8@semihalf.com>
7597 Date: Thu Jan 31 13:55:53 2008 +0100
7599 [new uImage] Removed dead ramdisk code on microblaze architectures
7601 Microblaze do_bootm_linux() includes ramdisk processing code but
7602 the ramdisk does not get used anywhere later on.
7604 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7606 commit 5ad03eb3854c162684222a718b44c0716ea0db03
7607 Author: Marian Balakowicz <m8@semihalf.com>
7608 Date: Thu Jan 31 13:55:39 2008 +0100
7610 [new uImage] Factor out common image_get_ramdisk() routine
7612 Architecture specific do_bootm_linux() routines share common
7613 ramdisk image processing code. Move this code to a common
7616 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7618 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
7619 Author: Marian Balakowicz <m8@semihalf.com>
7620 Date: Thu Jan 31 13:20:08 2008 +0100
7622 [new uImage] Move FDT error printing to common fdt_error() routine
7624 FDT error handling in PPC do_bootm_linux() shares the same message format.
7625 This patch moves error message printing to a helper fdt_error() routine.
7627 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7628 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
7630 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
7631 Author: Marian Balakowicz <m8@semihalf.com>
7632 Date: Thu Jan 31 13:20:07 2008 +0100
7634 [new uImage] Factor out common routines for getting os/arch/type/comp names
7636 Move numeric-id to name translation for image os/arch/type/comp header
7637 fields to a helper routines: image_get_os_name(), image_get_arch_name(),
7638 image_get_type_name(), image_get_comp_name().
7640 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7642 commit e99c26694a384221d336f6448c06a57479c0baa4
7643 Author: Marian Balakowicz <m8@semihalf.com>
7644 Date: Thu Jan 31 13:20:07 2008 +0100
7646 [new uImage] Remove standalone applications handling from boootm
7648 Standalone applications are supposed to be run using the "go" command.
7649 This patch removes standalone images handling from the do_bootm().
7651 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7653 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
7654 Author: Marian Balakowicz <m8@semihalf.com>
7655 Date: Thu Jan 31 13:20:07 2008 +0100
7657 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
7659 Support for OF_FLAT_TREE is to be obsoleted in the near future,
7660 remove related code from the bootm routines.
7662 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7664 commit 82850f3d32a2661868ec6876bed7a22c55cef718
7665 Author: Marian Balakowicz <m8@semihalf.com>
7666 Date: Thu Jan 31 13:20:06 2008 +0100
7668 [new uImage] Use image API in SH do_bootm_linux() routine
7670 Introduce image handling API for lately added Hitachi SH architecture.
7672 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7674 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
7675 Author: Marian Balakowicz <m8@semihalf.com>
7676 Date: Thu Jan 31 13:20:06 2008 +0100
7678 [new uImage] Rename architecture specific bootm code files
7680 Implementation of the do_bootm_linux() and other bootm helper routines is
7681 architecture specific code. As such it resides in lib_<arch> directories
7682 in files named <arch>_linux.c
7684 This patch renames those files to a more clear and accurate
7685 lib_<arch>/bootm.c form.
7687 List of the renamed files:
7688 lib_arm/armlinux.c -> lib_arm/bootm.c
7689 lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
7690 lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
7691 lib_i386/i386_linux.c -> lib_i386/bootm.c
7692 lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
7693 lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
7694 lib_mips/mips_linux.c -> lib_mips/bootm.c
7695 lib_nios/nios_linux.c -> lib_nios/bootm.c
7696 lib_nios2/nios_linux.c -> lib_nios2/bootm.c
7697 lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
7698 lib_sh/sh_linux.c -> lib_sh/bootm.c
7700 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7702 commit 7582438c285bf0cef82909d0f232de64ec567a8a
7703 Author: Marian Balakowicz <m8@semihalf.com>
7704 Date: Thu Jan 31 13:20:06 2008 +0100
7706 [new uImage] Return error on image move/uncompress overwrites
7708 Check for overwrites during image move/uncompress, return with error
7709 when the original image gets corrupted. Report clear message to the user
7710 and prevent further troubles when pointer to the corrupted images is passed
7711 to do_bootm_linux routine.
7713 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7715 commit f13e7b2e993c61fed1f607962501e051940d6e80
7716 Author: Marian Balakowicz <m8@semihalf.com>
7717 Date: Tue Jan 8 18:12:17 2008 +0100
7719 [new uImage] Cleanup image header pointer use in bootm code
7721 - use single image header pointer instead of a set of auxilliary variables.
7722 - add multi component image helper routines: get component size/data address
7724 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7726 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
7727 Author: Marian Balakowicz <m8@semihalf.com>
7728 Date: Tue Jan 8 18:17:10 2008 +0100
7730 [new uImage] Cleanup cmd_bootm.c
7732 - sort and cleanup headers, declarations, etc.
7733 - group related routines
7734 - cleanup indentation, white spaces
7736 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7738 commit af13cdbc01eaf88880978bfb4f603e012818ba24
7739 Author: Marian Balakowicz <m8@semihalf.com>
7740 Date: Tue Jan 8 18:11:45 2008 +0100
7742 [new uImage] Add memmove_wd() common routine
7744 Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
7746 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7748 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
7749 Author: Marian Balakowicz <m8@semihalf.com>
7750 Date: Tue Jan 8 18:11:44 2008 +0100
7752 [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
7754 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7756 commit 15158971f49255ccef54f0979a942cfd3de2ae52
7757 Author: Marian Balakowicz <m8@semihalf.com>
7758 Date: Tue Jan 8 18:11:44 2008 +0100
7760 [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
7762 Use image header copy instead of a (possibly corrupted) pointer to
7763 a initial image location.
7765 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7767 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
7768 Author: Marian Balakowicz <m8@semihalf.com>
7769 Date: Tue Jan 8 18:11:44 2008 +0100
7771 [new uImage] Remove I386 uImage fake_header() routine
7773 I386 targets are not using a uImage format, instead fake header
7774 is added to ram image before it is further processed by bootm.
7776 Remove this fixup and force proper uImage use for I386.
7778 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7780 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
7781 Author: Marian Balakowicz <m8@semihalf.com>
7782 Date: Tue Jan 8 18:11:44 2008 +0100
7784 [new uImage] Move CHUNKSZ definition to image.h
7786 CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
7787 move this definition to a common header.
7789 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7791 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
7792 Author: Marian Balakowicz <m8@semihalf.com>
7793 Date: Tue Jan 8 18:11:43 2008 +0100
7795 [new uImage] Move gunzip() common code to common/gunzip.c
7797 Move gunzip(), zalloc() and zfree() to a separate file.
7798 Share zalloc() and zfree() with cramfs uncompress routine.
7800 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7802 commit d45d5a18b6b36688f2365623f9d550566c664b5b
7803 Author: Marian Balakowicz <m8@semihalf.com>
7804 Date: Tue Jan 8 18:11:43 2008 +0100
7806 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
7808 Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
7809 readable in PPC variant of do_bootm_linux() routine.
7811 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7813 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
7814 Author: Marian Balakowicz <m8@semihalf.com>
7815 Date: Tue Jan 8 18:11:43 2008 +0100
7817 [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
7819 PPC implementation of do_bootm_linux() routine is moved to
7820 a dedicated file lib_ppc/ppc_linux.c
7822 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7824 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
7825 Author: Marian Balakowicz <m8@semihalf.com>
7826 Date: Tue Jan 8 18:14:09 2008 +0100
7828 [new uImage] Define a API for image handling operations
7830 - Add inline helper macros for basic header processing
7831 - Move common non inline code common/image.c
7832 - Replace direct header access with the API routines
7833 - Rename IH_CPU_* to IH_ARCH_*
7835 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7837 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
7838 Author: Marian Balakowicz <m8@semihalf.com>
7839 Date: Thu Jan 31 13:19:58 2008 +0100
7841 Add missing cmd_ximg.o to common/Makefile
7843 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
7845 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
7846 Author: Grzegorz Bernacki <gjb@semihalf.com>
7847 Date: Mon Jan 28 10:15:02 2008 +0100
7849 ADS5121e: DDR2 init/timing update.
7851 Signed-off-by: John Rigby <jrigby@freescale.com>
7852 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
7854 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
7855 Author: John Rigby <jrigby@freescale.com>
7856 Date: Wed Jan 30 13:36:57 2008 -0700
7860 Changes to match 5121 device tree going mainline in 2.6.25.
7862 Change OF_SOC from "soc5121" to plain "soc".
7863 Remove unneeded "ref-frequency" fixups.
7864 Remove "address" enetaddr fixup.
7866 Add bus-frequency fixup for old OF_SOC so old
7867 kernels with old device trees will work with new
7868 u-boot with 66MHz IPS clock
7870 Signed-off-by: John Rigby <jrigby@freescale.com>
7872 commit de55d18df3ff2ea614624e74793de7c43520e0e7
7873 Author: John Rigby <jrigby@freescale.com>
7874 Date: Wed Jan 30 13:36:56 2008 -0700
7876 Change IPS freq to 66MHz
7878 Recommended frequency is 66MHz
7879 Change divider from 4 to 3.
7881 Signed-off-by: John Rigby <jrigby@freescale.com>
7883 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
7884 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7885 Date: Mon Jan 14 22:38:55 2008 +0100
7887 xsengine: rename board_post_init to board_late_init
7889 missing migration from "Cleanup of some init functions"
7890 in c837dcb1a316745092567bfe4fb266d0941884ff
7892 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7894 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
7895 Author: Larry Johnson <lrj@acm.org>
7896 Date: Sat Jan 12 23:35:33 2008 -0500
7898 Add attribute POST_PREREL to ECC memory POST
7900 Signed-off-by: Larry Johnson <lrj@acm.org>
7902 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
7903 Author: Kumar Gala <galak@kernel.crashing.org>
7904 Date: Thu Jan 17 08:25:45 2008 -0600
7906 QE: Move FDT support into a common file
7908 Move the flat device tree setup for QE related devices into
7909 a common file shared between 83xx & 85xx platforms that have QE's.
7911 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7913 commit d38da537943cd36356b9d3d9d9b60533554b81d8
7914 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7915 Date: Wed Jan 23 17:20:14 2008 +0100
7917 AVR32: Make SDRAM refresh rate configurable
7919 The existing code assumes the SDRAM row refresh period should always
7920 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
7921 refresh rate should really be 7.81 us.
7923 Add a refresh_period member to struct sdram_info and initialize it
7924 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
7925 panic() until the refresh_period member is updated properly.
7927 Big thanks to Gerhard Berghofer for pointing out this issue.
7929 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7931 commit 61151cccb660cdb06a07fb283de6089913d7bde0
7932 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7933 Date: Thu Apr 19 10:10:11 2007 +0200
7935 ATSTK1000: Fix potential flash programming bug
7937 The (now obsolete) atngw100 flash programming code was having problems
7938 programming the onboard at49bv642 chip. The atstk1000 flash
7939 programming code may have the same bug, so import fix for this problem
7940 from the AVR32 Linux BSP.
7942 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7944 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
7945 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7946 Date: Thu Nov 22 17:04:13 2007 +0100
7948 ATSTK1004: Fix comment about default load address
7950 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
7951 wouldn't have worked anyway since the board can only access 4MB of
7954 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7956 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
7957 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7958 Date: Thu Nov 22 17:01:24 2007 +0100
7960 ATSTK1002: Use SDRAM + 4MB as default load address
7962 Many people run into problems when they compile a big kernel and load
7963 the uImage at the default SDRAM + 2MB address as the kernel will
7964 overwrite the uImage as it is being unpacked. Increase the default
7965 load address so that we can load a 4MB kernel image without any
7968 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7970 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
7971 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
7972 Date: Thu Nov 22 16:51:39 2007 +0100
7974 ATNGW100: Fix default mtest range
7976 Let mtest cover the whole SDRAM except the last megabyte, which is
7979 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
7981 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
7982 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7983 Date: Tue Jan 22 15:31:56 2008 +0900
7985 sh: Fix register address of SH7722.
7987 The address of SH7722 is wrong by old document.
7988 This patch fixes this problem.
7990 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7992 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
7993 Author: Mike Frysinger <vapier@gentoo.org>
7994 Date: Mon Feb 4 19:26:57 2008 -0500
7996 new command for displaying strings at specified memory locations
7998 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8000 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
8001 Author: Mike Frysinger <vapier@gentoo.org>
8002 Date: Mon Feb 4 19:26:57 2008 -0500
8004 rewrite/cleanup Blackfin RTC driver
8006 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8008 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
8009 Author: Mike Frysinger <vapier@gentoo.org>
8010 Date: Mon Feb 4 19:26:57 2008 -0500
8012 generate u-boot.ldr for Blackfin targets
8014 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8016 commit b779f7a59530436040f157f7841db7ab796542df
8017 Author: Mike Frysinger <vapier@gentoo.org>
8018 Date: Mon Feb 4 19:26:57 2008 -0500
8020 scrub unused symbols
8022 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8024 commit cc2977acc3bbbb7850f16645dd1081f95335868d
8025 Author: Mike Frysinger <vapier@gentoo.org>
8026 Date: Mon Feb 4 19:26:57 2008 -0500
8028 move Blackfin cpu object list to respective cpu directories
8030 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8032 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
8033 Author: Mike Frysinger <vapier@gentoo.org>
8034 Date: Mon Feb 4 19:26:57 2008 -0500
8036 interface to Blackfin on-chip One-Time-Programmable memory
8038 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8040 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
8041 Author: Mike Frysinger <vapier@gentoo.org>
8042 Date: Mon Feb 4 19:26:56 2008 -0500
8044 add support for memory commands with Blackfin L1 instruction memory
8046 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8048 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
8049 Author: Mike Frysinger <vapier@gentoo.org>
8050 Date: Mon Feb 4 19:26:56 2008 -0500
8052 use C code rather than inline assembly
8054 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8056 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
8057 Author: Mike Frysinger <vapier@gentoo.org>
8058 Date: Mon Feb 4 19:26:56 2008 -0500
8060 add Blackfin-specific reginfo command
8062 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8064 commit 0858b835e7ea501ea084d34cef75932f098342bb
8065 Author: Mike Frysinger <vapier@gentoo.org>
8066 Date: Mon Feb 4 19:26:55 2008 -0500
8068 add support for Blackfin symbol prefixes to examples
8070 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8072 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
8073 Author: Mike Frysinger <vapier@gentoo.org>
8074 Date: Mon Feb 4 19:26:55 2008 -0500
8076 add Blackfin-specific bdinfo command
8078 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8080 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
8081 Author: Mike Frysinger <vapier@gentoo.org>
8082 Date: Mon Feb 4 19:26:55 2008 -0500
8084 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
8086 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8088 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
8089 Author: Mike Frysinger <vapier@gentoo.org>
8090 Date: Mon Feb 4 19:26:55 2008 -0500
8092 unify the Blackfin board targets
8094 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8096 commit d4d7730853e5d675f76ec666807da3028c91d592
8097 Author: Mike Frysinger <vapier@gentoo.org>
8098 Date: Mon Feb 4 19:26:55 2008 -0500
8100 punt Blackfin VDSP headers and import sanitized/auto-generated ones
8102 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8104 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
8105 Author: Mike Frysinger <vapier@gentoo.org>
8106 Date: Mon Feb 4 19:26:54 2008 -0500
8108 always pull in asm/blackfin.h for Blackfin ports
8110 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8112 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
8113 Author: Mike Frysinger <vapier@gentoo.org>
8114 Date: Mon Feb 4 19:26:54 2008 -0500
8116 add missing __raw versions of Blackfin read/write io functions
8118 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8120 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
8121 Author: Mike Frysinger <vapier@gentoo.org>
8122 Date: Mon Feb 4 19:26:54 2008 -0500
8124 add the default Blackfin logo used by Blackfin boards with splash screens
8126 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8128 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
8129 Author: Mike Frysinger <vapier@gentoo.org>
8130 Date: Mon Feb 4 19:26:54 2008 -0500
8132 add some more Blackfin docs
8134 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8136 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
8137 Author: Mike Frysinger <vapier@gentoo.org>
8138 Date: Mon Feb 4 19:26:54 2008 -0500
8140 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
8142 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8144 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
8145 Author: Mike Frysinger <vapier@gentoo.org>
8146 Date: Mon Feb 4 19:26:54 2008 -0500
8148 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
8150 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8152 commit b45264ee85cbd92020640a32e02fb434fd557108
8153 Author: Mike Frysinger <vapier@gentoo.org>
8154 Date: Mon Feb 4 19:26:53 2008 -0500
8156 add gitignores for Blackfin pieces
8158 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8160 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
8161 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8162 Date: Fri Jan 18 01:14:03 2008 +0100
8164 TFTP: add host ip addr support
8166 allow to use a different server as set in serverip
8167 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
8168 if not defined the max length will be at 128
8170 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8172 commit e56b4b494cd92def577969f9678395aa22d34c9f
8173 Author: Timur Tabi <timur@freescale.com>
8174 Date: Wed Jan 9 14:35:26 2008 -0600
8176 85xx,86xx: Determine I2C clock frequencies and store in global_data
8178 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
8180 Update the get_clocks() function in 85xx and 86xx to determine the I2C
8181 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
8183 Signed-off-by: Timur Tabi <timur@freescale.com>
8185 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
8186 Author: Wolfgang Denk <wd@denx.de>
8187 Date: Thu Dec 27 10:56:54 2007 +0100
8189 OMAP5912: fix FIFO handling in UART driver
8191 According to the OMAP5912 Serial Interfaces Reference Guide (see
8192 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
8193 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
8194 changed when the baud clock is not running, i. e. when both DLL and
8197 Thus make sure that DLL and DLH are 0 when writing the FCR.
8199 Signed-off-by: Wolfgang Denk <wd@denx.de>
8201 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
8202 Author: Harald Welte <laforge@openmoko.org>
8203 Date: Wed Dec 19 15:10:52 2007 +0100
8205 ARM: S3C24x0 SoC NAND controller support
8207 This patch adds NAND support to the S3C24x0 SoC code in u-boot
8209 Signed-off-by: Harald Welte <laforge@openmoko.org>
8211 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
8212 Author: Harald Welte <laforge@openmoko.org>
8213 Date: Wed Dec 19 14:24:40 2007 +0100
8215 ARM: s3c24xx: Multiple serial port support
8217 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
8219 Signed-off-by: Harald Welte <laforge@openmoko.org>
8221 commit a25f72f1f73a11de68251fb88c89991e202e68fa
8222 Author: Harald Welte <laforge@openmoko.org>
8223 Date: Wed Dec 19 14:16:57 2007 +0100
8225 ARM: arm920t: Allow use of 'gd' pointer from IRQ
8227 This patch allows us to use the 'gd' pointer (and thus environment
8228 and everything else associated with it) from interrupt context on
8231 Signed-off-by: Harald Welte <laforge@openmoko.org>
8233 commit be19bd5cd0f454b63298844a0b5377e029b2caad
8234 Author: Harald Welte <laforge@openmoko.org>
8235 Date: Wed Dec 19 14:19:38 2007 +0100
8237 ARM: arm920/s3c24xx: IRQ demulitplexer callback
8239 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
8240 plus a stub implementation of it for the S3C2410.
8242 The purpose is to allow arm920t implementations such as the s3c24x0 to
8243 implement interrupt handlers in u-boot without having to touch core
8246 Signed-off-by: Harald Welte <laforge@openmoko.org>
8248 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
8249 Author: Hebbar <gururajakr@sanyo.co.in>
8250 Date: Tue Dec 18 16:03:07 2007 -0800
8252 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
8254 Add ifdef to bdinfo command to display ethernet information
8255 only if CONFIG_CMD_NET is defined for arm modules.
8257 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
8259 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
8260 Author: Hebbar <gururajakr@sanyo.co.in>
8261 Date: Tue Dec 18 16:00:54 2007 -0800
8263 ARM: add I2C init function call in lib_arm/board.c
8265 Adds I2C init func call to init sequence for ARM boards. This is
8266 present in ppc,blackfin and other processor init sequence.
8268 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
8270 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
8271 Author: Stefan Roese <sr@denx.de>
8272 Date: Fri Feb 1 09:38:29 2008 +0100
8274 ppc4xx: Fix ndfc HW ECC byte order
8276 The current ndfc HW ECC implementation swaps the first two ECC bytes.
8277 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
8278 so this swapping in the HW ECC driver is bogus. This patch fixes this
8279 problem and now really uses the SMC ECC byte order.
8281 Thanks to Sean MacLennan for pointing this out.
8283 Signed-off-by: Stefan Roese <sr@denx.de>
8285 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
8286 Author: Stefan Roese <sr@denx.de>
8287 Date: Wed Jan 30 15:35:50 2008 +0100
8289 ppc4xx: Fix GPIO configuration for pcs440ep
8291 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
8292 49-63 for GPIO. They have been configured as trace signals. This patch
8293 fixes this by clearing the corresponding bit.
8295 Signed-off-by: Stefan Roese <sr@denx.de>
8297 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
8298 Author: Stefan Roese <sr@denx.de>
8299 Date: Wed Jan 30 14:48:28 2008 +0100
8301 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
8303 Signed-off-by: Stefan Roese <sr@denx.de>
8305 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
8306 Author: Ladislav Michl <ladis@linux-mips.org>
8307 Date: Fri Dec 7 00:42:32 2007 +0100
8309 ARM: Board voiceblue update
8311 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
8313 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
8314 Author: Ladislav Michl <ladis@linux-mips.org>
8315 Date: Thu Dec 6 23:24:57 2007 +0100
8317 ARM: AT91RM9200 based boards config cleanup
8319 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
8321 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
8324 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
8325 Author: Ladislav Michl <ladis@linux-mips.org>
8326 Date: Thu Dec 6 22:59:16 2007 +0100
8328 ARM: Fix at91rm9200dk base address
8330 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
8331 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
8332 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
8333 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
8334 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
8335 I'm sending this patch 4th (!) time in hope it produces at least some
8338 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
8340 Fix at91rm9200dk base and environment address.
8342 commit c95219fae2a7add7daa2f91aedca65b1698465c7
8343 Author: stefano babic <sbabic@denx.de>
8344 Date: Tue Nov 20 10:40:24 2007 +0100
8346 MMC for PXA 27X (resubmit)
8348 MMC support for X_Scale PXA is broken and does not work.
8349 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
8350 There were already some patches around the world but none of them was
8351 merged into the official u-boot tree.
8353 This patch makes order fixing this issue. Resubmit after code cleanup.
8355 Applied and tested on PXA 270 (TrizepsIV module).
8357 Signed-off-by: Stefano Babic <sbabic@denx.de>
8359 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
8360 Author: stefano babic <sbabic@denx.de>
8361 Date: Tue Nov 20 10:37:04 2007 +0100
8363 Fix gcc issues in pxa-regs.h
8365 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
8366 issues generates wrong code.
8367 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
8368 This patch fixes the problem and solves the gcc-4 issues as the linux
8371 Signed-off-by: Stefano Babic <sbabic@denx.de>
8372 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
8374 commit 7047b388876e7b905b2ec4edb8010543e3641b85
8375 Author: Jens Gehrlein <sew_s@tqs.de>
8376 Date: Tue Jan 29 08:45:03 2008 +0100
8378 TQM834x: enable DHCP
8380 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
8381 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8383 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
8384 Author: Jens Gehrlein <sew_s@tqs.de>
8385 Date: Tue Jan 29 08:45:02 2008 +0100
8387 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
8389 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
8390 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8392 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
8393 Author: Ben Warren <biggerbadderben@gmail.com>
8394 Date: Sat Jan 26 23:41:19 2008 -0500
8396 Fix conditional compilation of mpx8xxx_spi driver
8398 This driver should only compile if CONFIG_MPC8XXX_SPI is set
8400 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8401 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8403 commit 63f732d3d3880feb531f48af247c025bf01462b0
8404 Author: Rafal Jaworowski <raj@semihalf.com>
8405 Date: Tue Jan 29 17:00:34 2008 +0100
8407 API: Provide dummy halt() in the glue layer.
8409 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
8411 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8413 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
8414 Author: Rafal Jaworowski <raj@semihalf.com>
8415 Date: Tue Jan 29 16:57:38 2008 +0100
8417 API: Convert conditional building to the new scheme.
8419 This fixes a build breakage with CONFIG_API enabled, which appeared after
8420 the recent changes in the U-Boot build system.
8422 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
8424 commit 98b742489c09780be6a832eeaa4e5eff824792bb
8425 Author: Wolfgang Denk <wd@denx.de>
8426 Date: Fri Jan 25 09:56:17 2008 +0100
8428 inka4x0: remove dead code
8430 Signed-off-by: Wolfgang Denk <wd@denx.de>
8432 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
8433 Author: Becky Bruce <becky.bruce@freescale.com>
8434 Date: Wed Jan 23 16:31:06 2008 -0600
8436 86xx: Add reginfo command
8438 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8440 commit ddcebcb638715a6278da93b553d5016f99823816
8441 Author: Becky Bruce <becky.bruce@freescale.com>
8442 Date: Wed Jan 23 16:31:05 2008 -0600
8444 86xx: Add print_laws function to fsl_law.c
8446 This can be used for debug, and will be used by board code
8447 to help implement reginfo.
8449 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8451 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
8452 Author: Becky Bruce <becky.bruce@freescale.com>
8453 Date: Wed Jan 23 16:31:04 2008 -0600
8455 86xx: Remove old-style law setup code
8457 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
8459 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8461 commit 713d8186649dae874613d495b0cecaa039a98b30
8462 Author: Becky Bruce <becky.bruce@freescale.com>
8463 Date: Wed Jan 23 16:31:03 2008 -0600
8465 86xx: Convert sbc8641d to use new law setup code.
8467 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8469 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
8470 Author: Becky Bruce <becky.bruce@freescale.com>
8471 Date: Wed Jan 23 16:31:02 2008 -0600
8473 86xx: Convert mpc8610hpcd to new law setup method.
8475 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8477 commit 4933b91f8a49e436681f163df3173beb91cac44a
8478 Author: Becky Bruce <becky.bruce@freescale.com>
8479 Date: Wed Jan 23 16:31:01 2008 -0600
8481 86xx: Support new law setup method and convert mpc8641
8483 Adds the support code in cpu/mpc86xx for the new law setup code
8484 recently created fsl_law.c, and changes the MPC8641HPCN config
8487 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8489 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
8490 Author: Becky Bruce <becky.bruce@freescale.com>
8491 Date: Wed Jan 23 16:31:00 2008 -0600
8493 86xx: Rearrange the sequence in start.S
8495 * split the BAT initialization so that only 2 BATs (for the boot page
8496 and stack) are programmed very early on. The rest are initialized later.
8497 * Move other BAT setup, ccsrbar setup, and law setup later in the code
8498 after translation has been enabled.
8500 These changes will facilitate the moving of law and BAT initialization
8501 to C code, and will aid with 36-bit physical addressing support.
8503 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8505 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
8506 Author: Wolfgang Denk <wd@denx.de>
8507 Date: Wed Jan 23 14:41:37 2008 +0100
8509 Coding Style Cleanup; update CHANGELOG
8511 Signed-off-by: Wolfgang Denk <wd@denx.de>
8513 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
8514 Author: Wolfgang Denk <wd@denx.de>
8515 Date: Wed Jan 23 14:31:17 2008 +0100
8517 Coding Style Cleanup; update CHANGELOG
8519 Signed-off-by: Wolfgang Denk <wd@denx.de>
8521 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
8522 Author: Dave Liu <r63238@freescale.com>
8523 Date: Fri Jan 18 10:07:04 2008 +0800
8525 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
8527 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
8528 cause the 83xx immap broken, so the DMA and PCI will
8531 The patch fix the struct spi8xxx and rm struct spi83xx.
8533 Signed-off-by: Dave Liu <daveliu@freescale.com>
8534 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8536 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
8537 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8538 Date: Sat Apr 14 17:11:49 2007 +0200
8540 AVR32: ATNGW100 board support
8542 Add support for the ATNGW100 Network Gateway reference design,
8543 including flash, ethernet and MMC support.
8545 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8547 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
8548 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
8549 Date: Sat Nov 24 18:15:31 2007 +0100
8551 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
8553 I don't know why the relevant layers can't do this by itself, but this
8556 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
8558 commit 799891ef7b1b3432032ec23466df6b665a797fa4
8559 Author: Michael Schwingen <michael@schwingen.org>
8560 Date: Fri Jan 18 00:04:28 2008 +0100
8562 Add AcTux board support
8566 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
8568 contain changes for multiple boards, the board-specific files follow as
8571 Signed-off-by: Michael Schwingen <michael@schwingen.org>
8573 commit 66a4344a4d910a11125df7768899ad529719855e
8574 Author: Michael Schwingen <michael@schwingen.org>
8575 Date: Wed Jan 16 19:53:23 2008 +0100
8577 add AcTux-4 board support
8579 Signed-off-by: Michael Schwingen <michael@schwingen.org>
8581 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
8582 Author: Michael Schwingen <michael@schwingen.org>
8583 Date: Wed Jan 16 19:51:55 2008 +0100
8585 add AcTux-3 board support
8587 Signed-off-by: Michael Schwingen <michael@schwingen.org>
8589 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
8590 Author: Michael Schwingen <michael@schwingen.org>
8591 Date: Wed Jan 16 19:51:14 2008 +0100
8593 add AcTux-2 board support
8595 Signed-off-by: Michael Schwingen <michael@schwingen.org>
8597 commit ea99e8f05b7240fd657739e286664664ae160abe
8598 Author: Michael Schwingen <michael@schwingen.org>
8599 Date: Wed Jan 16 19:50:37 2008 +0100
8601 add AcTux-1 board support
8603 Signed-off-by: Michael Schwingen <michael@schwingen.org>
8605 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
8606 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8607 Date: Mon Jan 14 19:20:08 2008 +0100
8609 ARM: remove useless function board_post_init
8611 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8613 commit 96bd462942022e4569b582c072a0ed26de1cd19b
8614 Author: Michael Schwingen <michael@schwingen.org>
8615 Date: Thu Jan 10 14:59:46 2008 +0100
8619 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
8620 No handshaking is done, but the active RTS signal allows to
8621 connect to the target using a PC which is using RTS/CTS
8622 handshake, and does no harm if the PC is set to ignore RTS.
8624 Signed-off-by: Michael Schwingen <michael@schwingen.org>
8626 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
8627 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8628 Date: Mon Jan 7 08:41:34 2008 +0100
8630 IXP: add dynamic microcode addr
8632 allow to load the microde from flash or ram by download it through
8633 the serial or other.
8635 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8636 Acked-by: Stefan Roese <sr@denx.de>
8638 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
8639 Author: Michael Schwingen <michael@schwingen.org>
8640 Date: Sat Nov 10 15:44:12 2007 +0100
8642 load ixp42x NPE firmware from separate flash block, remove dead code
8646 the following patch adds support to move the IXP42X NPE firmware to a
8647 separate flash block, whose start address is defined in
8648 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
8649 NPE-enabled u-boot without copyright problems due to the NPE firmware.
8651 I hope the patch applies, I get whitespace-related differences in the NPE
8652 files due to trailing whitespace in the original versions.
8654 Signed-off-by: Michael Schwingen <michael@schwingen.org>
8655 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8657 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
8658 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8659 Date: Tue Jan 15 14:15:46 2008 -0600
8661 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
8663 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8664 Signed-off by: John Rigby <jrigby@freescale.com>
8666 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
8667 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8668 Date: Tue Jan 15 14:02:49 2008 -0600
8670 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
8672 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8673 Signed-off by: John Rigby <jrigby@freescale.com>
8675 commit 777d1abd9796f1c2e148417cc10657e847d318ce
8676 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8677 Date: Tue Jan 15 14:00:25 2008 -0600
8679 ColdFire: Add MCF547x_8x FEC driver
8681 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8682 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8683 Signed-off by: John Rigby <jrigby@freescale.com>
8685 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
8686 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8687 Date: Tue Jan 15 13:54:09 2008 -0600
8689 ColdFire: Add MCF547x_8x dma code and header files
8691 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8692 Signed-off by: John Rigby <jrigby@freescale.com>
8694 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
8695 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8696 Date: Tue Jan 15 13:52:03 2008 -0600
8698 ColdFire: Add MCF547x_8x dma code - 2
8700 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8701 Signed-off by: John Rigby <jrigby@freescale.com>
8703 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
8704 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8705 Date: Tue Jan 15 13:48:52 2008 -0600
8707 ColdFire: Add MCF547x_8x dma code - 1
8709 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8710 Signed-off by: John Rigby <jrigby@freescale.com>
8712 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
8713 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8714 Date: Tue Jan 15 13:39:44 2008 -0600
8716 ColdFire: Add MCF547x_8x related header files
8718 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8719 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8720 Signed-off by: John Rigby <jrigby@freescale.com>
8722 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
8723 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8724 Date: Tue Jan 15 13:37:34 2008 -0600
8726 ColdFire: Add MCF547x_8x cpu arch
8728 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8729 Signed-off by: John Rigby <jrigby@freescale.com>
8731 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
8732 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8733 Date: Mon Jan 14 17:47:23 2008 -0600
8735 ColdFire: Add MCF5227x cpu and M52277EVB support-3
8737 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8738 Signed-off by: John Rigby <jrigby@freescale.com>
8740 commit c87581027994c148131b2f11aa75501f782ec19a
8741 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8742 Date: Mon Jan 14 17:46:19 2008 -0600
8744 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
8746 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8747 Signed-off by: John Rigby <jrigby@freescale.com>
8749 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
8750 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8751 Date: Mon Jan 14 17:43:33 2008 -0600
8753 ColdFire: Add MCF5227x cpu and M52277EVB support-1
8755 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8756 Signed-off by: John Rigby <jrigby@freescale.com>
8758 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
8759 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8760 Date: Mon Jan 14 17:35:44 2008 -0600
8762 ColdFire: Fix CFI Flash low level Read/Write macro
8764 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8765 Signed-off by: John Rigby <jrigby@freescale.com>
8767 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
8768 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8769 Date: Mon Jan 14 17:23:08 2008 -0600
8771 ColdFire: Add M5373EVB platform support - 2
8773 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8774 Signed-off by: John Rigby <jrigby@freescale.com>
8776 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
8777 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8778 Date: Mon Jan 14 17:19:54 2008 -0600
8780 ColdFire: Add M5373EVB platform support - 1
8782 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8783 Signed-off by: John Rigby <jrigby@freescale.com>
8785 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
8786 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8787 Date: Mon Jan 14 17:17:03 2008 -0600
8789 ColdFire: Update FlexBus CS for MCF532x
8791 Definition update and change from 16bit to 32bit
8793 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8794 Signed-off by: John Rigby <jrigby@freescale.com>
8796 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
8797 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8798 Date: Mon Jan 14 17:11:47 2008 -0600
8800 ColdFire: PCI and misc updates for MCF5445x
8802 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8803 Signed-off by: John Rigby <jrigby@freescale.com>
8805 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
8806 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8807 Date: Mon Jan 14 17:06:55 2008 -0600
8809 ColdFire: MCF5445x header files cleanup
8811 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8812 Signed-off by: John Rigby <jrigby@freescale.com>
8814 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
8815 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8816 Date: Mon Jan 14 16:59:42 2008 -0600
8818 ColdFire: MCF532x header files cleanup
8820 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8821 Signed-off by: John Rigby <jrigby@freescale.com>
8823 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
8824 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
8825 Date: Mon Jan 14 15:30:15 2008 -0600
8827 ColdFire: Add modules header files
8829 Add CF specific modules header files
8831 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8832 Signed-off-by: John Rigby <jrigby@freescale.com>
8834 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
8835 Author: Kim Phillips <kim.phillips@freescale.com>
8836 Date: Thu Jan 17 12:48:00 2008 -0600
8838 codingstyle cleanup for spi driver
8840 ..and rm unused CONFIG_FSL_SPI define
8842 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8844 commit d59feffb42c9f174116db7a82a311df98983dfce
8845 Author: Haiying Wang <Haiying.Wang@freescale.com>
8846 Date: Wed Jan 16 17:12:12 2008 -0500
8848 FSL: Fix common EEPROM_data structure definition
8850 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
8851 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
8854 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
8856 commit 6bee764bd6da510a4aad614880300c968bc7318d
8857 Author: Timur Tabi <timur@freescale.com>
8858 Date: Wed Jan 16 15:48:12 2008 -0600
8860 86xx: enable command-line editing
8862 Enable command-line editing for all MPC86xx boards.
8864 Signed-off-by: Timur Tabi <timur@freescale.com>
8866 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
8867 Author: Ben Warren <biggerbadderben@gmail.com>
8868 Date: Wed Jan 16 22:37:42 2008 -0500
8870 Implement hard SPI driver on MPC8349EMDS
8872 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
8873 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
8875 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8876 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8878 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
8879 Author: Ben Warren <biggerbadderben@gmail.com>
8880 Date: Wed Jan 16 22:37:35 2008 -0500
8882 Add support for a Freescale non-CPM SPI controller
8884 This patch adds support for the SPI controller found on Freescale PowerPC
8885 processors such as the MCP834x family. Additionally, a new config option,
8886 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
8888 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8889 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8891 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
8892 Author: Dave Liu <r63238@freescale.com>
8893 Date: Thu Jan 17 18:23:19 2008 +0800
8895 mpc83xx: Fix the fatal conflict of merge
8897 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
8898 will cause the mpc8315erdb board can't boot up.
8900 The patch fix that bug, and remove the duplicated #ifdef
8901 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
8904 Signed-off-by: Dave Liu <daveliu@freescale.com>
8905 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8907 commit 3259eeaa4148125a81417477f62c05bd67f60587
8908 Author: Larry Johnson <lrj@acm.org>
8909 Date: Thu Jan 17 08:50:09 2008 -0500
8911 Merge Sequoia beautification into Korat code
8913 Signed-off-by: Larry Johnson <lrj@acm.org>
8915 commit e16925773211291b562e77187061e9dd1d757217
8916 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8917 Date: Thu Jan 17 07:45:05 2008 +0100
8919 net: add 'ethrotate' environment variable
8921 [PATCH] net: add 'ethrotate' environment variable
8923 This patch replaces the buildtime configuration option
8924 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
8925 configuration veriable. See README.
8927 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8928 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8930 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
8931 Author: Stefan Roese <sr@denx.de>
8932 Date: Thu Jan 17 14:29:04 2008 +0100
8934 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
8936 Signed-off-by: Stefan Roese <sr@denx.de>
8938 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
8939 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8940 Date: Thu Jan 17 18:07:32 2008 +0900
8942 sh: Remove CONFIG_COMMANDS from MS7720SE config file
8944 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8946 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
8947 Author: Niklaus Giger <niklaus.giger@netstal.com>
8948 Date: Wed Jan 16 18:39:20 2008 +0100
8950 ppc4xx: Netstal HCU4 board: added various fixes and POST
8952 - Moved some common code to netstal/common/nm_bsp.c.
8953 - sdram initialisation goes go netstal/common/fixed_sdram.c.
8954 - Added support for POST.
8955 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
8957 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8959 commit 69b0634a4ee98c9791815600d43b99f626a952f3
8960 Author: Niklaus Giger <niklaus.giger@netstal.com>
8961 Date: Thu Jan 17 12:53:56 2008 +0100
8963 ppc4xx: netstal/common define routines used by all boards
8965 Added some routines used by all Netstal boards:
8966 - nm_bsp.c: - nm_show_print and
8967 - common_misc_init_r
8968 - set_params_for_sw_install. Very specific code to handle our SW
8969 installation procedure
8970 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
8971 to handle sdram initialization.
8972 - nm.h: Common header
8974 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8976 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
8977 Author: Niklaus Giger <niklaus.giger@netstal.com>
8978 Date: Wed Jan 16 18:39:18 2008 +0100
8980 ppc4xx: Netstal HCU5 board: added various fixes and POST
8982 - Moved some common code to nestal/common/nm_bsp.c.
8983 - Added support for the vxWorks EDR.
8984 - Enable trace for Lauterbach, if present.
8985 - Added support for POST.
8986 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
8988 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
8990 commit 4371090e5da77edc7bf9f296364db4801639d9c4
8991 Author: Niklaus Giger <niklaus.giger@netstal.com>
8992 Date: Wed Jan 16 18:39:08 2008 +0100
8994 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
8997 - Reduced rom_size from 384 to 320 kB
8998 - Environment is now in flash
9002 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
9004 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
9005 Author: Niklaus Giger <niklaus.giger@netstal.com>
9006 Date: Wed Jan 16 18:37:50 2008 +0100
9008 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
9011 - Reduced rom_size from 384 to 320 kB
9012 - Environment is now in flash
9016 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
9018 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
9019 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9020 Date: Thu Jan 17 10:53:08 2008 +0100
9022 ppc4xx: Complete DU440 board support
9024 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9026 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
9027 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9028 Date: Thu Jan 17 10:52:30 2008 +0100
9030 ppc4xx: Add DU440 board support
9032 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9034 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
9035 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9036 Date: Thu Jan 17 15:53:52 2008 +0900
9038 sh: Update SuperH SCIF driver
9040 This patch fixed wrong SH7720 CPU macro and changed macro that
9041 calculated value of SCBRR register.
9043 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9045 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
9046 Author: Grzegorz Bernacki <gjb@semihalf.com>
9047 Date: Wed Jan 16 15:12:47 2008 +0100
9049 Set ips dividor to 1/4 of csb clock.
9051 Previous setting cause ips clock to be out of spec. This bug was found by John
9052 Rigby from Freescale.
9054 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
9056 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
9057 Author: Kumar Gala <galak@kernel.crashing.org>
9058 Date: Thu Jan 17 02:19:18 2008 -0600
9060 85xx: Get ride of old TLB setup code
9062 Now that all boards have been converted, remove old config code and the
9063 config option for the new style.
9065 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9067 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
9068 Author: Kumar Gala <galak@kernel.crashing.org>
9069 Date: Thu Jan 17 02:02:10 2008 -0600
9071 85xx: Convert TQM85xx to new TLB setup
9073 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9075 commit 74121b470c14f7eaf284ee838bffca6f9521069e
9076 Author: Kumar Gala <galak@kernel.crashing.org>
9077 Date: Thu Jan 17 01:56:32 2008 -0600
9079 85xx: Convert STXGP3 & STXSSA to new TLB setup
9081 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9083 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
9084 Author: Kumar Gala <galak@kernel.crashing.org>
9085 Date: Thu Jan 17 01:44:34 2008 -0600
9087 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
9089 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9091 commit 818218bac6a11591e2542c344d2330e0f4e1968b
9092 Author: Kumar Gala <galak@kernel.crashing.org>
9093 Date: Thu Jan 17 01:31:34 2008 -0600
9095 85xx: Convert PM854/PM856 to new TLB setup
9097 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9099 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
9100 Author: Kumar Gala <galak@kernel.crashing.org>
9101 Date: Thu Jan 17 01:25:33 2008 -0600
9103 85xx: Convert MPC8540EVAL to new TLB setup
9105 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9107 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
9108 Author: Kumar Gala <galak@kernel.crashing.org>
9109 Date: Thu Jan 17 01:12:22 2008 -0600
9111 85xx: Convert MPC8568 MDS to new TLB setup
9113 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9115 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
9116 Author: Kumar Gala <galak@kernel.crashing.org>
9117 Date: Thu Jan 17 01:01:09 2008 -0600
9119 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
9121 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9123 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
9124 Author: Kumar Gala <galak@kernel.crashing.org>
9125 Date: Thu Jan 17 00:52:29 2008 -0600
9127 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
9129 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9131 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
9132 Author: Kumar Gala <galak@kernel.crashing.org>
9133 Date: Thu Jan 17 00:32:17 2008 -0600
9135 85xx: Convert ATUM8548 to new TLB setup
9137 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9139 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
9140 Author: Kumar Gala <galak@kernel.crashing.org>
9141 Date: Wed Jan 16 23:11:57 2008 -0600
9143 85xx: Convert MPC8544 DS to new TLB setup
9145 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9147 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
9148 Author: Kumar Gala <galak@kernel.crashing.org>
9149 Date: Wed Jan 16 22:38:34 2008 -0600
9151 85xx: Reworked initial processor init
9153 Reworked the initial processor initialzation sequence:
9154 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
9155 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
9156 * Reworked initial asm code to do most of the core init before TLBs
9158 The main reasons for these changes are to allow handling of 36-bit phys
9159 addresses in the future and some of the issues that will exist when we
9162 There are a few caveats on what can be initialized via the LAW and TLB
9164 * TLB entry 14/15 can't be initialized via the TLB table
9165 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
9166 the code that is currently executing.
9168 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9170 commit 44a23cfd6360a68eaa41f945190618a55519eac3
9171 Author: Kumar Gala <galak@kernel.crashing.org>
9172 Date: Wed Jan 16 22:33:22 2008 -0600
9174 85xx: Introduce new tlb API
9176 Add a set of functions to manipulate TLB entries:
9177 * set_tlb() - write a tlb entry
9178 * invalidate_tlb() - invalidate a tlb array
9179 * disable_tlb() - disable a variable size tlb entry
9180 * init_tlbs() - setup initial tlbs based on static table
9182 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9184 commit be88b1699863c262818f3af7f60173b4d48df8fc
9185 Author: Stefan Roese <sr@denx.de>
9186 Date: Thu Jan 17 07:50:17 2008 +0100
9188 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
9190 Signed-off-by: Stefan Roese <sr@denx.de>
9192 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
9193 Author: Kumar Gala <galak@kernel.crashing.org>
9194 Date: Wed Jan 16 10:04:42 2008 -0600
9196 85xx: Use proper defines for PCI addresses
9198 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
9199 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
9200 be used for configuring the PCI ATMU.
9202 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9204 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
9205 Author: Kumar Gala <galak@kernel.crashing.org>
9206 Date: Wed Jan 16 09:22:29 2008 -0600
9208 85xx: Remove old style of LAW init
9210 All boards are now using the new fsl_law code so we can drop the old version.
9212 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9214 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
9215 Author: Kumar Gala <galak@kernel.crashing.org>
9216 Date: Wed Jan 16 09:15:29 2008 -0600
9218 85xx: convert remaining 85xx boards over to use new LAW init code
9220 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
9221 to use new LAW init code.
9223 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9225 commit 572b13afc42710f2957c382a710360429c0e099b
9226 Author: Kumar Gala <galak@kernel.crashing.org>
9227 Date: Wed Jan 16 09:11:53 2008 -0600
9229 85xx: convert STXGP3/STXSSA over to use new LAW init code
9231 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9233 commit 45f2166ac0233a9263058378f39612bd11f61196
9234 Author: Kumar Gala <galak@kernel.crashing.org>
9235 Date: Wed Jan 16 09:06:48 2008 -0600
9237 85xx: convert PM854/PM856 over to use new LAW init code
9239 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9241 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
9242 Author: Kumar Gala <galak@kernel.crashing.org>
9243 Date: Wed Jan 16 09:05:27 2008 -0600
9245 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
9247 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9249 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
9250 Author: Kumar Gala <galak@kernel.crashing.org>
9251 Date: Wed Jan 16 01:45:10 2008 -0600
9253 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
9255 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9257 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
9258 Author: Kumar Gala <galak@kernel.crashing.org>
9259 Date: Wed Jan 16 01:32:06 2008 -0600
9261 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
9263 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9265 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
9266 Author: Kumar Gala <galak@kernel.crashing.org>
9267 Date: Wed Jan 16 01:16:16 2008 -0600
9269 85xx: convert MPC8544 DS over to use new LAW init code
9271 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9273 commit 83d40dfd79fe868796275802f60116d84b9e4395
9274 Author: Kumar Gala <galak@kernel.crashing.org>
9275 Date: Wed Jan 16 01:13:58 2008 -0600
9277 85xx: Move LAW init code into C
9279 Move the initialization of the LAWs into C code and provide an API
9280 to allow modification of LAWs after init.
9282 Board code is responsible to provide a law_table and num_law_entries.
9284 We should be able to use the same code on 86xx as well.
9286 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9288 commit bed8ce838a609aaab136d43b25e6df2a520bc854
9289 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9290 Date: Sat Dec 22 15:03:12 2007 +0100
9292 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
9294 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9296 commit 0764c164fed6277d359cf132d55187ea34290114
9297 Author: Vlad Lungu <vlad@comsys.ro>
9298 Date: Wed Jan 16 19:27:51 2008 +0200
9300 MIPS:Target support for qemu -M mips
9302 With serial, NE2000, IDE support. Tested in big-endian mode.
9303 Memory size hard-coded to 128M for now, so don't play with
9306 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
9308 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
9309 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9310 Date: Fri Jan 11 00:01:37 2008 +0100
9312 Fix nfs command help to reflect that the serverip is optional
9314 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9315 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9317 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
9318 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9319 Date: Mon Dec 10 22:32:14 2007 +0100
9321 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
9323 and move is_valid_ether_addr board file
9325 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9326 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9328 commit c2f896b8fc4722e36915903e1942e138e68ce804
9329 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9330 Date: Wed Jan 16 16:13:31 2008 +0900
9332 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
9334 rx_status on the memory is basically in LE, but needs to be handled in CPU
9335 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
9338 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9339 Cc: Masami Komiya <mkomiya@sonare.it>
9340 Cc: Lucas Jin <lucasjin@gmail.com>
9341 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9343 commit 96a236746fe6a7b84802afb4ed31536696d34812
9344 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9345 Date: Wed Jan 16 16:12:26 2008 +0900
9347 drivers/net/rtl8139.c: Fix cache coherency issues
9349 Current driver is meant for cache coherent systems. This patch adds
9350 flush_cache() routines to support cache non-coherent systems.
9352 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9353 Cc: Masami Komiya <mkomiya@sonare.it>
9354 Cc: Lucas Jin <lucasjin@gmail.com>
9355 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9357 commit d1276c76c1e2b5035296689280ba1acb2c425104
9358 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9359 Date: Wed Jan 16 16:11:14 2008 +0900
9361 drivers/net/rtl8139.c: Fix tx timeout
9363 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
9364 does, the condition "(currticks() < to)" becomes invalid and immediately
9365 leads to tx timeout error. This patch introduces the fine-graded udely(10)
9366 loops to ease the impact of wrapping around.
9368 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
9369 Cc: Masami Komiya <mkomiya@sonare.it>
9370 Cc: Lucas Jin <lucasjin@gmail.com>
9371 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9373 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
9374 Author: Dave Liu <r63238@freescale.com>
9375 Date: Fri Jan 11 18:45:28 2008 +0800
9377 TSEC: Add the support for RealTek RTL8211B PHY
9379 Add the support of RealTek RTL8211B PHY, the RTL8211B
9380 PHY only supports RGMII and MII mode.
9382 Signed-off-by: Dave Liu <daveliu@freescale.com>
9383 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9385 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
9386 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
9387 Date: Wed Jan 16 09:40:41 2008 +0100
9389 Remove annoying debug printout for PHY less boards.
9391 PHY less board prints out lots of "read wrong ...":
9392 read wrong value : mii_id 3,mii_reg 2, base e0102320
9393 read wrong value : mii_id 3,mii_reg 3, base e0102320
9394 UEC: PHY is Generic MII (ffffffff)
9395 read wrong value : mii_id 3,mii_reg 4, base e0102320
9396 read wrong value : mii_id 3,mii_reg 0, base e0102320
9397 read wrong value : mii_id 3,mii_reg 1, base e0102320
9398 read wrong value : mii_id 3,mii_reg 1, base e0102320
9399 read wrong value : mii_id 3,mii_reg 5, base e0102320
9400 read wrong value : mii_id 3,mii_reg 1, base e0102320
9401 read wrong value : mii_id 3,mii_reg 1, base e0102320
9402 read wrong value : mii_id 3,mii_reg 5, base e0102320
9403 FSL UEC0: Full Duplex
9404 FSL UEC0: Speed 100BT
9405 FSL UEC0: Link is up
9406 Using FSL UEC0 device
9408 Make this printout depend on UEC_VERBOSE_DEBUG and
9409 remove its definition in uec_phy.c
9411 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
9412 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9414 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
9415 Author: Kim Phillips <kim.phillips@freescale.com>
9416 Date: Tue Jan 15 14:11:00 2008 -0600
9418 net: reduce boot latency on QE UEC based boards
9420 actually polling for PHY autonegotiation to finish enables us to remove the
9421 5 second boot prompt latency present on QE based boards.
9423 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
9424 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
9425 code shamelessly stolen from tsec driver.
9427 also rm unused CONFIG_RMII_MODE code.
9429 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9430 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
9431 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9433 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
9434 Author: michael.firth@bt.com <michael.firth@bt.com>
9435 Date: Wed Jan 16 11:40:51 2008 +0000
9437 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
9439 The current TSEC driver limits MDIO access to the devices that have been configured as attached
9440 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
9442 Signed-off-by: Michael Firth <michael.firth@bt.com>
9443 Acked-by: Andy Fleming <afleming@freescale.com>
9444 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9446 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
9447 Author: Kim Phillips <kim.phillips@freescale.com>
9448 Date: Wed Jan 16 00:38:05 2008 -0600
9450 Add support for the MPC837xERDB
9452 MPC837xERDB board support includes:
9453 * DDR2 330MHz hardcoded (soldered on the board)
9454 * Local Bus NOR Flash
9456 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
9457 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
9460 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
9461 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
9462 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9464 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
9465 Author: Kim Phillips <kim.phillips@freescale.com>
9466 Date: Wed Jan 16 12:06:16 2008 -0600
9468 mpc83xx: add support for more system clock performance controls
9470 System registers that are modified are the Arbiter Configuration
9471 Register (ACR), the System Priority Control Register (SPCR), and the
9472 System Clock Configuration Register (SCCR).
9474 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
9475 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
9476 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9478 commit 16c3cde050e2d243e62b37486f1558570787beb8
9479 Author: James Yang <james.yang@freescale.com>
9480 Date: Wed Jan 16 11:58:08 2008 -0600
9482 FSL: Generalize PIXIS reset command parsing.
9484 Before, the order of arguments to the pixis_reset
9485 command needed to be supplied in a hard-coded order.
9486 Generalize the command parsing to allow any order.
9488 Signed-off-by: James Yang <james.yang@freescale.com>
9489 Acked-by: Jon Loeliger <jdl@freescale.com>
9491 commit ad8f8687b78c3e917b173f038926695383c55555
9492 Author: Jon Loeliger <jdl@freescale.com>
9493 Date: Tue Jan 15 13:42:41 2008 -0600
9495 FSL: Convert board/freescale/common/Makefile to use CONFIG_
9497 Convert the board/freescale/common/Makefile to use
9498 CONFIG_* options to select which files to conditionally
9499 compile into the board/freescale/common library rather
9500 than conditionally compiling entire files.
9507 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
9509 Signed-off-by: Jon Loeliger <jdl@freescale.com>
9511 commit 7c2221eb230372a9e537c4f6636b147b0909325f
9512 Author: Roy Zang <tie-fei.zang@freescale.com>
9513 Date: Tue Jan 15 16:38:38 2008 +0800
9515 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
9517 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
9518 Remove unused ethernet CONFIG_ options.
9520 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
9521 Acked-by: Jon Loeliger <jdl@freescale.com>
9523 commit 711a7946277d2e29af481011e8635e9975c54e45
9524 Author: Kim Phillips <kim.phillips@freescale.com>
9525 Date: Tue Jan 15 14:05:14 2008 -0600
9527 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
9529 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
9531 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9533 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
9534 Author: Kim Phillips <kim.phillips@freescale.com>
9535 Date: Tue Jan 15 09:51:12 2008 -0600
9537 mpc83xx: clean up mpc8360emds.c warnings
9539 mpc8360emds.c: In function 'ft_board_setup':
9540 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
9541 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
9542 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
9543 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
9544 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
9545 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
9547 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9549 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
9550 Author: Kim Phillips <kim.phillips@freescale.com>
9551 Date: Mon Jan 14 16:14:46 2008 -0600
9553 mpc83xx: fix phy-connection-type fixup code
9555 use tree passed to us in local blob, not global fdt.
9557 Also use fdt_path_offset to convert to relative offset, since absolute
9558 reference is needed to check for rgmii-id mode string value.
9560 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9562 commit 2b4c952be7c4357a13e839d48df80853820c33eb
9563 Author: Kumar Gala <galak@kernel.crashing.org>
9564 Date: Mon Jan 14 09:01:40 2008 -0600
9566 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
9568 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9569 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9571 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
9572 Author: Poonam Aggrwal <b10812@freescale.com>
9573 Date: Mon Jan 14 09:41:14 2008 +0530
9575 Changes in uboot DDR configuration for MPC8313eRDB
9577 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
9578 DDR configuration in u-boot code. Some are related to performance, some
9579 affect stability and some correct few basic errors in the current
9582 The changes have been tested and found to give better memory latency
9583 figures on MPC8313eRDB.LMBench figures prove it.
9587 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
9588 (this may improve performance for application with many read
9589 or write to open pages).
9590 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
9591 001 (activating all the CS when only one is used may cause
9592 unwanted noise on the system)
9594 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
9596 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
9598 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
9599 comply with the 3 ODT clk requirements)
9600 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
9601 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
9603 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
9604 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
9606 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
9607 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
9609 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
9610 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
9612 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
9613 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
9614 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
9615 Cc: Josep P J <PJ.Joseph@freescale.com>
9616 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9618 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
9619 Author: Jerry Van Baren <gvb.uboot@gmail.com>
9620 Date: Sat Jan 12 13:24:14 2008 -0500
9622 Enable the isdram command on the MPC8360EMDS board
9624 The isdram command prints out decoded information the "serial presence
9625 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
9626 debugging memory configuration problems.
9628 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
9629 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9631 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
9632 Author: Dave Liu <r63238@freescale.com>
9633 Date: Fri Jan 11 18:48:24 2008 +0800
9635 mpc83xx: Add the support for MPC8315ERDB board
9638 - Boot from NOR Flash
9639 - DDR2 266MHz hardcoded configuration
9640 - Local bus NOR Flash R/W operation
9641 - I2C, UART, MII and RTC
9645 Signed-off-by: Dave Liu <daveliu@freescale.com>
9646 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9648 commit b05884efa614e4d8a9413158fc228e0dc02ab704
9649 Author: Dave Liu <r63238@freescale.com>
9650 Date: Fri Jan 11 18:46:50 2008 +0800
9652 mpc83xx: Add config of eTSEC emergency priority in SPCR
9654 The TSEC emergency priority definition of 831x/837x
9655 is different than the definition of 834x in SPCR register.
9657 Add the other config of TSEC emergency priority into
9660 Signed-off-by: Dave Liu <daveliu@freescale.com>
9661 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9663 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
9664 Author: Dave Liu <r63238@freescale.com>
9665 Date: Fri Jan 11 18:42:19 2008 +0800
9667 mpc83xx: Remove cache config from MPC8360ERDK.h
9669 The MPC8360ERDK board support patch is added before
9670 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
9671 so, miss clean up it.
9673 The patch clean up the miss cache config.
9675 Signed-off-by: Dave Liu <daveliu@freescale.com>
9676 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9678 commit cd9d23053d435c08fc8695017b5cb9003fcda786
9679 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
9680 Date: Mon Jan 14 23:09:32 2008 +0300
9682 nand: FSL UPM NAND driver
9684 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9686 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
9687 Author: Kyungmin Park <kmpark@infradead.org>
9688 Date: Tue Jan 15 08:59:44 2008 +0900
9690 OneNAND: Separate U-Boot dependent code from OneNAND
9692 OneNAND: Separate U-Boot dependent code from OneNAND
9694 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9696 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
9697 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9698 Date: Wed Jan 16 10:33:46 2008 +0100
9700 ppc4xx: Sequoia coding style cleanup and beautification
9702 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
9704 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
9705 Author: Larry Johnson <lrj@acm.org>
9706 Date: Tue Jan 15 14:35:58 2008 -0500
9708 ppc4xx: Refactor ECC POST for AMCC Denali core
9710 The ECC POST reported intermittent failures running after power-up on
9711 the Korat PPC440EPx board. Even when the test passed, the debugging
9712 output occasionally reported additional unexpected ECC errors.
9714 This refactoring has three main objectives: (1) minimize the code
9715 executed with ECC enabled during the tests, (2) add more checking of the
9716 results so any unexpected ECC errors would cause the test to fail, and
9717 (3) use synchronization (only) where required by the processor.
9719 Signed-off-by: Larry Johnson <lrj@acm.org>
9721 commit 2465665b73ac2f688af945b1ed510752afa816a4
9722 Author: David Saada <David.Saada@ecitele.com>
9723 Date: Tue Jan 15 10:40:24 2008 +0200
9725 QE UEC: Extend number of supported UECs to 4
9727 This patch extends the number of supported UECs to 4. Note that the
9728 problem of QE thread resources exhaustion is resolved by setting the
9729 correct number of QE threads according to Ethernet type (GBE or FE).
9731 Signed-off-by: David Saada <david.saada@ecitele.com>
9732 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9734 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
9735 Author: Wolfgang Denk <wd@denx.de>
9736 Date: Wed Jan 16 00:01:01 2008 +0100
9738 LWMON5: enable hush shell as command line parser
9740 Signed-off-by: Wolfgang Denk <wd@denx.de>
9742 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
9743 Author: Wolfgang Denk <wd@denx.de>
9744 Date: Tue Jan 15 17:22:28 2008 +0100
9746 ADS5121: disable watchdog; enable image timestamps
9748 Signed-off-by: Wolfgang Denk <wd@denx.de>
9750 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
9751 Author: Wolfgang Denk <wd@denx.de>
9752 Date: Tue Jan 15 17:21:28 2008 +0100
9754 TK885D: fixes for bigger flash sector sizes on new modules;
9755 adjust default environment;
9756 disable SCC ethernet (not used on this board).
9758 Signed-off-by: Wolfgang Denk <wd@denx.de>
9760 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
9761 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9762 Date: Tue Jan 15 17:48:13 2008 +0900
9764 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
9766 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9768 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
9769 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9770 Date: Tue Jan 15 23:25:25 2008 +0900
9772 sh: Add support SH7710/SH7712
9774 SH7710/SH7712 of SH3 CPU are supported.
9775 SH771X is called SH-Ether, and has the Ether controller in CPU.
9776 The driver of Ether is not included in this patch.
9778 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9780 commit 63a11be68306870e04d3851ed9fa41955cdf4894
9781 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9782 Date: Tue Jan 15 23:06:17 2008 +0900
9784 sh: Add support of map_physmem() and unmap_physmem() to SuperH
9786 This patch add the support of map_physmem() and unmap_physmem()
9787 used with Common Flash Interface(CFI) driver.
9789 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9791 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
9792 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9793 Date: Wed Jan 9 14:42:27 2008 +0900
9795 sh: Add maintainer of MS7720SE to the MAINTAINER file
9797 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9799 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
9800 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9801 Date: Wed Jan 9 14:39:58 2008 +0900
9803 sh: Fix board name in MS7720SE's config.mk
9805 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9807 commit c0a04d93734d768b39dbb72fb501b65614c8615d
9808 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9809 Date: Wed Jan 9 14:37:36 2008 +0900
9811 sh: Add MS7720SE to MAKEALL
9813 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9815 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
9816 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
9817 Date: Mon Dec 3 22:58:50 2007 +0900
9819 sh: Add support for MS7720RP02 board
9821 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
9822 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9823 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9825 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
9826 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
9827 Date: Wed Jan 9 14:30:02 2008 +0900
9829 sh: Add support for SH7720 in serial_sh driver.
9831 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
9832 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9833 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9835 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
9836 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
9837 Date: Mon Dec 3 22:58:45 2007 +0900
9839 sh: Add support SH3 and SH7720
9841 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
9842 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9843 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9845 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
9846 Author: Stefan Roese <sr@denx.de>
9847 Date: Tue Jan 15 10:11:02 2008 +0100
9849 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
9851 Signed-off-by: Stefan Roese <sr@denx.de>
9853 commit 17bef68097ab3692500a36fb31115bff7910aa99
9854 Author: Niklaus Giger <niklausgiger@gmx.ch>
9855 Date: Mon Jan 14 14:04:42 2008 +0100
9857 ppc_4xx: Fix post spr.c for PPC405
9859 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
9860 for PPC440 and derivates processor.
9862 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
9864 commit 06c428bcd4413014b43236e77765022071424fa6
9865 Author: Dave Liu <r63238@freescale.com>
9866 Date: Mon Jan 14 11:12:01 2008 +0800
9868 QE: fix compile warning
9870 qe.c: In function 'qe_upload_firmware':
9871 qe.c:390: warning: pointer targets in passing argument 2
9872 uec.c: In function 'uec_initialize':
9873 uec.c:1236: warning: 'uec_info' may be used uninitialized
9875 Signed-off-by: Dave Liu <daveliu@freescale.com>
9877 commit a0dd99d51efa55fe023e19c97ead92683725eb11
9878 Author: Stefan Roese <sr@denx.de>
9879 Date: Mon Jan 14 10:05:05 2008 +0100
9881 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
9883 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
9884 to remove the USB PHY reset after powerup. The CPLD will keep the
9885 USB PHY in reset (active low) until the bit is set to 1 in
9886 board_early_init_f().
9888 Signed-off-by: Stefan Roese <sr@denx.de>
9890 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
9891 Author: Wolfgang Denk <wd@denx.de>
9892 Date: Sun Jan 13 23:26:45 2008 +0100
9894 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
9896 Signed-off-by: Wolfgang Denk <wd@denx.de>
9898 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
9899 Author: Wolfgang Denk <wd@denx.de>
9900 Date: Sun Jan 13 23:37:50 2008 +0100
9902 ADS5121: Fix typo in ads5121.c, adjust default environment
9904 Signed-off-by: Wolfgang Denk <wd@denx.de>
9906 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
9907 Author: John Rigby <jrigby@freescale.com>
9908 Date: Fri Aug 24 18:18:43 2007 -0600
9910 ADS5121: MAX slew rate for PATA pins
9912 Signed-off-by: John Rigby <jrigby@freescale.com>
9914 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
9915 Author: Wolfgang Denk <wd@denx.de>
9916 Date: Sun Jan 13 21:05:52 2008 +0100
9918 Fix Makefile dependency problem with parallel builds.
9920 Signed-off-by: Wolfgang Denk <wd@denx.de>
9922 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
9923 Author: Wolfgang Denk <wd@denx.de>
9924 Date: Sun Jan 13 19:51:39 2008 +0100
9926 MPC8544DS: fix board Makefile for silent build (with -s)
9928 Signed-off-by: Wolfgang Denk <wd@denx.de>
9930 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
9931 Author: Wolfgang Denk <wd@denx.de>
9932 Date: Sun Jan 13 16:44:08 2008 +0100
9934 PMC440 board: fix board Makefile for out-of-tree building
9936 Signed-off-by: Wolfgang Denk <wd@denx.de>
9938 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
9939 Author: Wolfgang Denk <wd@denx.de>
9940 Date: Sun Jan 13 16:07:44 2008 +0100
9942 Makalu: fix compile warning
9944 Signed-off-by: Wolfgang Denk <wd@denx.de>
9946 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
9947 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9948 Date: Sun Jan 13 12:36:12 2008 +0100
9950 cmd_nand : fix compiler warning.
9952 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9954 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
9955 Author: Michael Schwingen <rincewind@discworld.dascon.de>
9956 Date: Sat Jan 12 20:29:47 2008 +0100
9958 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
9960 Signed-off-by: Michael Schwingen <michael@schwingen.org>
9961 Acked-by: Stefan Roese <sr@denx.de>
9963 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
9964 Author: Wolfgang Denk <wd@denx.de>
9965 Date: Sun Jan 13 02:19:44 2008 +0100
9967 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
9969 Signed-off-by: Wolfgang Denk <wd@denx.de>
9971 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
9972 Author: Wolfgang Denk <wd@denx.de>
9973 Date: Sun Jan 13 02:19:13 2008 +0100
9975 MPC8xx FEC driver: fix compiler warning.
9977 Signed-off-by: Wolfgang Denk <wd@denx.de>
9979 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
9980 Author: Wolfgang Denk <wd@denx.de>
9981 Date: Sun Jan 13 00:59:21 2008 +0100
9983 Fix Makefile dependencies issues; allow silent build
9985 - get rid of "version" target whichdidn't really work
9986 - make autoconf.mk depend on version_autogenerated.h to make sure
9987 to rebuild files as needed
9988 - add XECHO macro to allow for silent build using "make -s"
9990 Signed-off-by: Wolfgang Denk <wd@denx.de>
9992 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
9993 Author: Wolfgang Denk <wd@denx.de>
9994 Date: Sun Jan 13 00:55:47 2008 +0100
9996 ADS5121e: fix compile warning
9998 Signed-off-by: Wolfgang Denk <wd@denx.de>
10000 commit f2b6f4610627fe3d607620e25082916a01538875
10001 Author: Wolfgang Denk <wd@denx.de>
10002 Date: Sun Jan 13 00:55:18 2008 +0100
10004 MUNICes: fix board Makefile for remote build directory
10006 Signed-off-by: Wolfgang Denk <wd@denx.de>
10008 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
10009 Author: Oliver Weber <almoeli@gmx.de>
10010 Date: Wed Jan 9 17:04:38 2008 +0100
10012 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
10014 Signed-off-by: Oliver Weber <almoeli@gmx.de>
10016 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
10017 Author: Andreas Engel <andreas.engel@ericsson.com>
10018 Date: Wed Jan 9 17:10:56 2008 +0100
10020 Make bootretry work when command line editing is enabled
10022 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
10023 This patch fixes the problem.
10025 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
10027 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
10028 Author: Larry Johnson <lrj@acm.org>
10029 Date: Fri Jan 11 23:26:18 2008 -0500
10031 Refactor code for "i2c sdram" command
10033 Signed-off-by: Larry Johnson <lrj@acm.org>
10035 commit 0df6b8446c4721b91ce311548114891130371083
10036 Author: Larry Johnson <lrj@acm.org>
10037 Date: Thu Jan 10 22:23:39 2008 -0500
10039 Fix "i2c sdram" command for DDR2 DIMMs
10041 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
10042 "i2c sdram" command. This patch provides correct alternative
10043 interpretations when DDR2 memory is detected.
10045 Signed-off-by: Larry Johnson <lrj@acm.org>
10047 commit 64134f011254123618798ff77c42ba196b2ec485
10048 Author: Wolfgang Denk <wd@denx.de>
10049 Date: Sat Jan 12 20:31:39 2008 +0100
10051 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
10053 With recent toolchain versions, some boards would not build because
10054 or errors like this one (here for ocotea board when building with
10056 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
10058 For many boards, the .bss section is big enough that it wraps around
10059 at the end of the address space (0xFFFFFFFF), so the problem will not
10060 be visible unless you use a 64 bit tool chain for development. On
10061 some boards however, changes to the code size (due to different
10062 optimizations) we bail out with section overlaps like above.
10064 The fix is to add the NOLOAD attribute to the .bss and .sbss
10065 sections, telling the linker that .bss does not consume any space in
10068 Signed-off-by: Wolfgang Denk <wd@denx.de>
10070 commit 3afac79ec27b91df185f090b31dad9620779f440
10071 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
10072 Date: Fri Jan 11 20:42:58 2008 -0600
10074 USB: Add Philips 1561 PCI-OHCI ids
10075 (needed for M5475EVB)
10077 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
10079 commit 5e8def6731cd7bec74bff42a16b139de04010353
10080 Author: Wolfgang Denk <wd@denx.de>
10081 Date: Sat Jan 12 15:51:34 2008 +0100
10083 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
10086 Signed-off-by: Heiko Schocher <hs@denx.de>
10087 Signed-off-by: Wolfgang Denk <wd@denx.de>
10089 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
10090 Author: Grzegorz Bernacki <gjb@semihalf.com>
10091 Date: Fri Jan 11 12:03:43 2008 +0100
10093 MPC512X: Cleanup bus clock names.
10095 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10097 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
10098 Author: Grzegorz Bernacki <gjb@semihalf.com>
10099 Date: Tue Jan 8 17:16:59 2008 +0100
10101 MPC512X: Fixed typo in macro name.
10103 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10105 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
10106 Author: Grzegorz Bernacki <gjb@semihalf.com>
10107 Date: Tue Jan 8 17:16:15 2008 +0100
10109 ads5121: Added support for FDT.
10111 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
10113 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
10114 Author: Wolfgang Denk <wd@denx.de>
10115 Date: Sat Jan 12 01:05:50 2008 +0100
10117 Coding Style cleanup; update CHANGELOG.
10119 Signed-off-by: Wolfgang Denk <wd@denx.de>
10121 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
10122 Author: Heiko Schocher <hs@denx.de>
10123 Date: Fri Jan 11 15:15:17 2008 +0100
10125 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
10127 Signed-off-by: Timur Tabi <timur@freescale.com>
10128 Signed-off-by: Heiko Schocher <hs@denx.de>
10130 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
10131 Author: Heiko Schocher <hs@denx.de>
10132 Date: Fri Jan 11 15:15:16 2008 +0100
10134 MUNICes: Set the right CFG_DEFAULT_MBAR value.
10136 Signed-off-by: Heiko Schocher <hs@denx.de>
10138 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
10139 Author: Heiko Schocher <hs@denx.de>
10140 Date: Fri Jan 11 15:15:15 2008 +0100
10142 added the config File for the MUNICes board.
10144 Signed-off-by: Heiko Schocher <hs@denx.de>
10146 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
10147 Author: Heiko Schocher <hs@denx.de>
10148 Date: Fri Jan 11 15:15:14 2008 +0100
10150 added basic support for the MUNICes board.
10152 Signed-off-by: Heiko Schocher <hs@denx.de>
10154 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
10155 Author: Wolfgang Denk <wd@denx.de>
10156 Date: Sat Jan 12 00:39:37 2008 +0100
10158 Update CHANGELOG and MAINTAINERS files.
10160 Signed-off-by: Wolfgang Denk <wd@denx.de>
10162 commit 5ba7390c3cb579172be66888a371707b47b5be4e
10163 Author: Anatolij Gustschin <agust@denx.de>
10164 Date: Fri Jan 11 02:15:02 2008 +0100
10166 Fix compilation problem in common/cmd_bmp.c
10168 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
10169 isn't defined. This patch fix this.
10171 Signed-off-by: Anatolij Gustschin <agust@denx.de>
10173 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
10174 Author: Heiko Schocher <hs@denx.de>
10175 Date: Fri Jan 11 01:12:09 2008 +0100
10177 Fix defaultconfig for the mgcoge board.
10179 Signed-off-by: Heiko Schocher <hs@denx.de>
10181 commit ac9db066b26935f31bff15c98168b19faeb603f3
10182 Author: Heiko Schocher <hs@denx.de>
10183 Date: Fri Jan 11 01:12:08 2008 +0100
10185 Added support for the mgcoge board from keymile.
10187 Signed-off-by: Heiko Schocher <hs@denx.de>
10189 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
10190 Author: Heiko Schocher <hs@denx.de>
10191 Date: Fri Jan 11 01:12:07 2008 +0100
10193 Enable SMC microcode relocation patch for SMC1.
10195 Signed-off-by: Heiko Schocher <hs@denx.de>
10197 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
10198 Author: Heiko Schocher <hs@denx.de>
10199 Date: Fri Jan 11 01:12:06 2008 +0100
10201 Added support for the mgsuvd board from keymile.
10203 Signed-off-by: Heiko Schocher <hs@denx.de>
10205 commit bf05293973b348f6946c9df92cd3c65ece42d0be
10206 Author: James Yang <james.yang@freescale.com>
10207 Date: Thu Jan 10 16:02:07 2008 -0600
10209 Fix 64-bit vsprintf.
10211 There were some size and unsigned problems.
10212 Also add support for "ll" size modifier in format string like glibc
10214 Signed-off-by: James Yang <James.Yang@freescale.com>
10215 Acked-by: Jon Loeliger <jdl@freescale.com>
10217 commit 92fa37eac530860643afa26ae347af3d23d67309
10218 Author: Larry Johnson <lrj@acm.org>
10219 Date: Wed Jan 9 12:42:35 2008 -0500
10221 Remove superfluous preprocessor conditionals from LM73 driver
10223 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
10225 (2) Use conditional Makefile.o.
10227 Signed-off-by: Larry Johnson <lrj@acm.org>
10229 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
10230 Author: Guennadi Liakhovetski <lg@denx.de>
10231 Date: Thu Jan 10 17:59:07 2008 +0100
10233 Add support for the TK885D baseboard from TELE-DATA
10235 The TK885D board uses a TQM885D module from TQ, this port adds an
10236 own configuration file and adds a last_stage_init() method to
10237 configure the two PHYs, depending on the phy_auto_nego environment
10240 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
10242 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
10243 Author: Kumar Gala <galak@kernel.crashing.org>
10244 Date: Thu Jan 10 02:22:05 2008 -0600
10246 Fix compiler warning
10248 main.c: In function 'readline_into_buffer':
10249 main.c:927: warning: unused variable 'p_buf'
10251 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10253 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
10254 Author: Anatolij Gustschin <agust@denx.de>
10255 Date: Fri Jan 11 14:30:01 2008 +0100
10257 Add Fujitsu CoralP/Lime video driver
10259 Signed-off-by: Anatolij Gustschin <agust@denx.de>
10260 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
10262 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
10263 Author: Anatolij Gustschin <agust@denx.de>
10264 Date: Fri Jan 11 02:39:47 2008 +0100
10266 Fix video console newline and carriage return handling
10268 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
10269 are not displayed correctly. This is an attempt to fix
10270 this issue. Also add carriage return handling.
10272 Signed-off-by: Anatolij Gustschin <agust@denx.de>
10273 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
10275 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
10276 Author: Stefan Roese <sr@denx.de>
10277 Date: Fri Jan 11 15:53:58 2008 +0100
10279 ppc4xx: Fix sdram init on Sequoia boards
10281 Clear possible errors in MCSR resulting from data-eye-search.
10282 If not done, then we could get an interrupt later on when
10283 exceptions are enabled.
10285 Signed-off-by: Stefan Roese <sr@denx.de>
10287 commit d610a60730b7464f6f659db49d264d89a7c71061
10288 Author: Anatolij Gustschin <agust@denx.de>
10289 Date: Fri Jan 11 15:31:09 2008 +0100
10291 ppc4xx: Rework Lime support for lwmon5
10293 Rework Lime support for lwmon5 using new video driver
10295 Signed-off-by: Anatolij Gustschin <agust@denx.de>
10297 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
10298 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10299 Date: Fri Jan 11 14:55:16 2008 +0100
10301 ppc4xx: Update PMC440 config file
10303 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10305 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
10306 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10307 Date: Fri Jan 11 14:55:08 2008 +0100
10309 ppx4xx: Fix sdram init on PMC440 boards
10311 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10313 commit 061aad4d320dddce26247699dcf2875ee2ea1366
10314 Author: Dave Liu <r63238@freescale.com>
10315 Date: Thu Jan 10 23:09:33 2008 +0800
10317 mpc83xx: Fix the bug of 266MHz data rate DDR
10319 The DDR doesn't work on the 266MHz data rate,
10320 the patch fix the bug.
10322 Signed-off-by: Dave Liu <daveliu@freescale.com>
10323 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10325 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
10326 Author: Dave Liu <r63238@freescale.com>
10327 Date: Thu Jan 10 23:08:26 2008 +0800
10329 mpc83xx: Make the code more readable
10331 Format the code, make it more readable
10333 Signed-off-by: Dave Liu <daveliu@freescale.com>
10334 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10336 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
10337 Author: Dave Liu <r63238@freescale.com>
10338 Date: Thu Jan 10 23:07:23 2008 +0800
10340 mpc83xx: Reduce the latency of DDR
10342 Reduce the AL from 2 to 1 clock to improve the performance.
10344 Signed-off-by: Dave Liu <daveliu@freescale.com>
10345 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10347 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
10348 Author: Dave Liu <r63238@freescale.com>
10349 Date: Thu Jan 10 23:06:05 2008 +0800
10351 mpc83xx: Fix the wrong definition of MPC8315E
10353 According to the latest user manual of MPC8315E,
10354 1) The SVCOD of HRCWL is different than 837x
10355 2) The SCCR has changes
10357 Signed-off-by: Dave Liu <daveliu@freescale.com>
10358 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10360 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
10361 Author: Dave Liu <r63238@freescale.com>
10362 Date: Thu Jan 10 23:05:00 2008 +0800
10364 mpc83xx: Fix the typo in mpc83xx.h
10366 The SPCR about TSEC priority is wrong.
10368 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
10369 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
10370 Signed-off-by: Dave Liu <daveliu@freescale.com>
10371 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10373 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
10374 Author: Dave Liu <r63238@freescale.com>
10375 Date: Thu Jan 10 23:04:13 2008 +0800
10377 mpc83xx: Fix the typo in global data struct
10379 Fix the typo in global_data.h
10381 Signed-off-by: Dave Liu <daveliu@freescale.com>
10382 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10384 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
10385 Author: Dave Liu <r63238@freescale.com>
10386 Date: Thu Jan 10 23:03:03 2008 +0800
10388 mpc83xx: Remove cache config from config.h
10390 clean up the cache config from configs.h of board
10392 Signed-off-by: Dave Liu <daveliu@freescale.com>
10393 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10395 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
10396 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10397 Date: Wed Jan 9 20:57:47 2008 +0300
10399 mpc83xx: add support for the MPC8360E-RDK
10401 This is MPC8360E based board with:
10402 - 256MB fixed SDRAM;
10403 - 8MB Intel Strata NOR flash;
10404 - StMICRO 64MiB NAND flash;
10405 - two 10/100/1000 ethernet ports connected via Broadcom
10407 - two 10/100 ethernet ports connected via National
10409 - one PCI and one miniPCI slots;
10410 - four serial ports (two NS16550-compatible, two UCCs);
10411 - four USB ports working through MPC8360E "FHCI" USB controller;
10412 - Fujitsu MB86277 graphics controller;
10413 - Analog to Digital Converter/Touchscreen controller, AD7843
10416 Features not supported in this patch are:
10417 - StMICRO 64MiB NAND flash (patch sent);
10418 - MINT framebuffer initialization (patch is pending);
10419 - Fetching production information from the EEPROM via I2C;
10421 - Two slow UCCs used as RS-485 UARTs.
10423 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10424 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10426 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
10427 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10428 Date: Wed Jan 9 20:57:40 2008 +0300
10430 mpc83xx: add "fsl, qe" compatible fixups
10432 New device trees will use "fsl,qe" compatible properties.
10434 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10435 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10437 commit 977b57583a7c34010e566a09a679ec3c1836f996
10438 Author: Kim Phillips <kim.phillips@freescale.com>
10439 Date: Wed Jan 9 15:24:06 2008 -0600
10441 mpc83xx: add missing CONFIG_HAS_ETH0 defines
10443 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
10444 is defined; add the define to the missing board configs.
10446 Thanks to Emilian Medve for finding this.
10448 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10450 commit b830b7f1635984ba607219fcbd78597c28eeb529
10451 Author: Becky Bruce <bgill@freescale.com>
10452 Date: Thu Jan 10 14:00:28 2008 -0600
10454 86xx: Support 2GB DIMMs
10456 Configure the number of bits used to address the banks inside the SDRAM
10457 device. The default register value of 0 means 2 bits to address 4 banks.
10458 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
10460 Signed-off-by: Becky Bruce <bgill@freescale.com>
10462 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
10463 Author: Niklaus Giger <niklausgiger@gmx.ch>
10464 Date: Thu Jan 10 18:50:33 2008 +0100
10466 ppc4xx: Make Sequoia boot vxWorks
10469 TLB 0 a entry for the Machine Check interrupt
10470 TLB 1 a entry for the RAM
10471 TLB 2 a entry for the EBC
10472 TLB 3 a entry for the boot flash
10474 After changing the baudrate to 9600 I had no problems to boot the
10475 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
10478 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
10480 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
10481 Author: Larry Johnson <lrj@arlinx.com>
10482 Date: Wed Jan 9 23:10:27 2008 -0500
10484 ppc4xx: Fix dflush() to restore DVLIM register
10486 Signed-off-by: Larry Johnson <lrj@acm.org>
10488 commit 252f60b068d1f94190b5bcfda169db582387e15e
10489 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10490 Date: Thu Jan 10 03:52:44 2008 -0500
10492 Nios2: remove common/cmd_bdinfo.c unused variable.
10494 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10495 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
10497 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
10498 Author: Ben Warren <biggerbadderben@gmail.com>
10499 Date: Wed Jan 9 18:15:53 2008 -0500
10501 Fix Ethernet init() return codes
10503 Change return values of init() functions in all Ethernet drivers to conform
10509 All drivers going forward should return 0 on success. Current drivers that
10510 return 1 on success were left as-is to minimize changes.
10512 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10513 Acked-by: Stefan Roese <sr@denx.de>
10514 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10515 Acked-by: Kim Phillips <kim.phillips@freescale.com>
10516 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10517 Acked-By: Timur Tabi <timur@freescale.com>
10519 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
10520 Author: Wolfgang Denk <wd@denx.de>
10521 Date: Thu Jan 10 00:55:14 2008 +0100
10523 Coding Style cleanup; update CHANGELOG
10525 Signed-off-by: Wolfgang Denk <wd@denx.de>
10527 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
10528 Author: Kim Phillips <kim.phillips@freescale.com>
10529 Date: Wed Jan 9 16:56:54 2008 -0600
10531 Add QE brg freq and correct qe bus freq fdt update code
10533 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10534 Signed-off-by: Andy Fleming <afleming@freescale.com>
10536 commit 890dfef06c2d169a3356359596890754dfb8ee1c
10537 Author: Andy Fleming <afleming@freescale.com>
10538 Date: Wed Jan 9 16:34:51 2008 -0600
10540 Remove cache config from ATUM8548 and sbc8548 configs
10542 These boards weren't updated by Kumar's config patch because they
10543 weren't in the tree, yet.
10545 Signed-off-by: Andy Fleming <afleming@freescale.com>
10547 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
10548 Author: Timur Tabi <timur@freescale.com>
10549 Date: Mon Jan 7 13:31:19 2008 -0600
10551 85xx: add ability to upload QE firmware
10553 Define the layout of a binary blob that contains a QE firmware and instructions
10554 on how to upload it. Add function qe_upload_firmware() to parse the blob and
10555 perform the actual upload. Add command-line command "qe fw" to take a firmware
10556 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
10557 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
10558 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
10560 Signed-off-by: Timur Tabi <timur@freescale.com>
10562 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
10563 Author: Kumar Gala <galak@kernel.crashing.org>
10564 Date: Tue Jan 8 01:22:21 2008 -0600
10566 85xx: Remove cache config from configs.h
10568 Either use the standard defines in asm/cache.h or grab the information
10569 at runtime from the L1CFG SPR.
10571 Also, minor cleanup in cache.h to make the code a bit more readable.
10573 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10575 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
10576 Author: robert lazarski <robertlazarski@gmail.com>
10577 Date: Fri Dec 21 10:39:27 2007 -0500
10579 mpc85xx: Add support for ATUM8548 (updated)
10581 Add support for Instituto Atlantico's ATUM8548 board
10583 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
10584 Signed-off-by: Andy Fleming <afleming@freescale.com>
10586 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
10587 Author: robert lazarski <robertlazarski@gmail.com>
10588 Date: Fri Dec 21 10:36:37 2007 -0500
10590 mpc85xx: Add support for ATUM8548 (updated)
10592 Add support for Instituto Atlantico's ATUM8548 board
10594 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
10596 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
10597 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
10598 Date: Thu Dec 13 06:45:14 2007 -0600
10600 mpc85xx: Add support for SBC8548 (updated)
10602 Add support for Wind River's SBC8548 reference board.
10604 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
10606 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
10607 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
10608 Date: Thu Dec 13 06:45:08 2007 -0600
10610 mpc85xx: Add support for SBC8548 (updated)
10612 Add support for Wind River's SBC8548 reference board.
10614 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
10615 Signed-off by: Andy Fleming <afleming@freescale.com>
10617 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
10618 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10619 Date: Mon Oct 22 19:58:19 2007 +0400
10621 MPC8568E-MDS: set up QE pario for UART1
10623 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
10624 be set up appropriately.
10626 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10628 commit ad162249cb371e9e38971676f09be791e5f3cf4a
10629 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10630 Date: Mon Oct 22 18:12:46 2007 +0400
10632 MPC8568E-MDS: reset UCCs to use them reliably
10634 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
10637 p.s Similar code exists in the Linux kernel board file (for capability
10638 reasons with older U-Boots), but should be removed some day.
10640 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10642 commit 2146cf56821c3364786ca94a7306008c5824b238
10643 Author: Kumar Gala <galak@kernel.crashing.org>
10644 Date: Wed Dec 19 01:18:15 2007 -0600
10646 Reworked FSL Book-E TLB macros to be more readable
10648 The old macros made it difficult to know what WIMGE and perm bits
10649 were set for a TLB entry. Actually use the bit masks for these items
10650 since they are only a single bit.
10652 Also moved the macros into mmu.h out of e500.h since they aren't specific
10655 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10657 commit 1d47273d46925929f8f2c1913cd96d7257aade88
10658 Author: Kumar Gala <galak@kernel.crashing.org>
10659 Date: Tue Dec 18 23:21:51 2007 -0600
10661 Use FSL Book-E MMU macros from Linux Kernel
10663 Grab the FSL Book-E MAS register macros from Linux. Also added
10664 defines for page sizes up to 4TB and removed SHAREN since it doesnt
10667 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10669 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
10670 Author: Andy Fleming <afleming@freescale.com>
10671 Date: Wed Jan 9 13:51:32 2008 -0600
10673 Fix my own merge stupidity
10675 Way back in August I merged Heiko's patch:
10676 566a494f592: [PCS440EP] upgrade the PCS440EP board
10678 with Jon's CONFIG_COMMANDS patches.
10680 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
10682 However, in the process, I left out some of Heiko's good changes.
10684 Now Heiko's and Jon's patches are properly merged in fat_register_device()
10686 Signed-off-by: Andy Fleming <afleming@freescale.com>
10688 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
10689 Author: James Yang <James.Yang@freescale.com>
10690 Date: Wed Jan 9 11:17:49 2008 -0600
10692 Expose parse_line() globally.
10694 Add new function readline_into_buffer() that allows the
10695 output of readline to be put into a pointer to char buffer.
10697 This refactoring allows other functions besides the
10698 main command loop to also use the same input mechanism.
10700 Signed-off-by: James Yang <James.Yang@freescale.com>
10701 Acked-by: Jon Loeliger <jdl@freescale.com>
10703 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
10704 Author: Guennadi Liakhovetski <lg@denx.de>
10705 Date: Wed Jan 9 01:15:25 2008 +0100
10707 trivial: fix consequences of a bad merge
10709 Fix what looks like a merge artifact.
10711 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
10713 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
10714 Author: Zhang Wei <wei.zhang@freescale.com>
10715 Date: Thu Jan 3 10:51:15 2008 +0800
10717 Add Ctrl combo key support to usb keyboard driver.
10719 Ctrl combo key support is added, which is very useful to input Ctrl-C
10720 for interrupt current job.
10721 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
10722 key input when tstc() is called.
10724 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
10726 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
10727 Author: Marcel Ziswiler <marcel@ziswiler.com>
10728 Date: Sun Dec 30 03:30:56 2007 +0100
10730 fix various comments
10732 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
10734 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
10735 Author: Marcel Ziswiler <marcel@ziswiler.com>
10736 Date: Sun Dec 30 03:30:46 2007 +0100
10738 fix comments with new drivers organization
10740 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
10742 commit a9b410dc7d2a4721c408b13abfc037988150f145
10743 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10744 Date: Fri Dec 28 12:50:59 2007 +0900
10746 Remove the obsolete terse version of do_mii()
10748 We now have more useful version of do_mii() and everybody use it.
10749 Gerald Van Baren says:
10751 > When I originally wrote the mii command 6(!) years ago, I wrote a
10752 > verbose version that printed human readable decomposition of the flags,
10753 > etc., and a terse one that didn't print as much stuff and thus had a
10754 > smaller memory footprint.
10756 > It sounds like the terse version has withered and died, apparently
10757 > people are only using the verbose version (which is very understandable,
10760 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10761 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10763 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
10764 Author: Mike Frysinger <vapier@gentoo.org>
10765 Date: Thu Dec 27 13:42:56 2007 -0500
10767 Do not reference sha1.c when building mkimage.
10769 remove sha1.o from mkimage linking since it isn't actually used.
10771 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
10773 commit b9173af73e524d37c812f210173cf83385c5171a
10774 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10775 Date: Thu Dec 27 15:39:54 2007 +0900
10777 common/cmd_mii.c: Add sanity argc check
10779 If type mii command without arguments, we suffer from uninitialized argv[]
10780 entries; for example we MIPS get stuck by TLB error.
10782 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
10784 commit 500856eb1707ed17d9204baa61dd59948d3b2899
10785 Author: Rafal Jaworowski <raj@semihalf.com>
10786 Date: Wed Jan 9 19:39:36 2008 +0100
10788 API for external applications.
10790 This is an API for external (standalone) applications running on top of
10791 U-Boot, and is meant to be more extensible and robust than the existing
10792 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
10795 Included is the demo application using this new framework (api_examples).
10797 Please note this is still an experimental feature, and is turned off by
10800 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
10802 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
10803 Author: Jon Loeliger <jdl@freescale.com>
10804 Date: Wed Jan 9 12:14:55 2008 -0600
10806 86xx: Remove cache config from configs.h
10808 Just use the standard defines in asm/cache.h.
10810 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10812 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
10813 Author: Rafal Jaworowski <raj@semihalf.com>
10814 Date: Wed Jan 9 18:05:27 2008 +0100
10816 Globalize envmatch()
10818 The newly introduced API (routines related to env vars) will need to call
10821 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
10823 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
10824 Author: Jon Loeliger <jdl@freescale.com>
10825 Date: Fri Jan 4 12:07:27 2008 -0600
10827 Convert MPC8610HPCD to use libfdt.
10829 Assumes the presence of the aliases node in the DTS to
10830 locate the pci and serial nodes for fixups.
10832 Use consistent fdtaddr and fdtfile in environment variables.
10834 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10836 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
10837 Author: Jon Loeliger <jdl@freescale.com>
10838 Date: Fri Jan 4 11:58:23 2008 -0600
10840 8610: Fix lingering compile warnings.
10844 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10846 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
10847 Author: Wolfgang Denk <wd@denx.de>
10848 Date: Wed Jan 9 15:14:46 2008 +0100
10850 Coding Style cleanup, update CHANGELOG
10852 Signed-off-by: Wolfgang Denk <wd@denx.de>
10854 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
10855 Author: Mike Frysinger <vapier@gentoo.org>
10856 Date: Tue Dec 18 04:29:55 2007 -0500
10858 fix easylogo on big endian dev systems
10860 didnt realize how out of shape easylogo actually was until i tried using it.
10861 this patch does byte swapping as need be on the input tga header since the tga
10862 is in little endian but the host could just as well be big endian. i didnt
10863 bother using bswap macros or such stuff from system headers as nothing in
10864 POSIX dictates byte swapping functionality.
10866 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
10868 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
10869 Author: Mike Frysinger <vapier@gentoo.org>
10870 Date: Tue Dec 18 03:23:25 2007 -0500
10874 - make the Makefile not suck
10875 - include proper headers for prototypes
10876 - fix obvious broken handling of strchr() when handling '.' in filenames
10878 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
10880 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
10881 Author: raptorbrino@aim.com <raptorbrino@aim.com>
10882 Date: Thu Dec 13 21:23:28 2007 -0500
10884 Fix build problems under Cygwin
10886 This patch allows u-boot to build without error in a cygwin
10887 environment. Cygwin does not define __u64 in it's
10888 include/asm/types.h file. The -idirafter flag in the u-boot
10889 build causes the inclusion of the cygwin types.h file as opposed
10890 to u-bot/include/asm/types.h file which does define __u64.
10891 Subsequently, sha1.c compile fails due to unknown symbol.
10893 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
10895 commit 43ef1c381f9195504a2488f5cb909227eb97d475
10896 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
10897 Date: Fri Nov 30 17:29:59 2007 +0100
10899 cmd_bmp: Add support for displaying gzip compressed bmps
10901 The existing code can show information about a gzip compressed BMP
10902 image, but can't actually display it.
10904 Therefore, move the decompression code out of bmp_info() and use it in
10905 bmp_display() as well in order to display a compressed BMP image.
10907 Also, clean things up a bit and fix a memory leak while we're at it.
10909 [hskinnemoen@atmel.com: a bit of refactoring]
10910 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
10912 commit d197ffd8172c6fdef38733424640a9a47295d6e9
10913 Author: Guennadi Liakhovetski <lg@denx.de>
10914 Date: Thu Nov 29 21:15:56 2007 +0100
10916 Fix and optimize MII operations on FEC (MPC8xx) controllers
10918 This patch fixes several issues at least on a MPC885 based system with two
10919 FEC interfaces used in MII mode.
10921 1. PHY discovery should first read PHY_PHYIDR2 register and only then
10922 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
10923 otherwise the values read are wrong. Also notice, that PHY discovery
10924 cannot work on MPC88x / MPC87x in setups with both FECs active at all
10925 in its present form, because for both interfaces the registers from FEC
10926 1 are used to communicate over MII.
10928 2. Remove code duplication for resetting the FEC by isolating it into a
10931 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
10933 4. Optimize mii_init() to only reset the FEC 1 controller once.
10935 5. Fix a typo in mii_init() using index i instead of j thus potentially
10936 leading to unpredictable results.
10938 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
10940 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
10941 Author: Guennadi Liakhovetski <lg@denx.de>
10942 Date: Tue Nov 20 13:14:20 2007 +0100
10944 Fix endianness conversions in rtl8169 driver
10946 It is unclear on what platforms this driver has been tested, since
10947 noone up to now defines CONFIG_RTL8169 in the board configuration
10948 header. Now it has been fixed for a big-endian mpc8241 based
10949 linkstation platform. This patch presents the necessary endianness
10952 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
10954 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
10955 Author: Zhang Wei <wei.zhang@freescale.com>
10956 Date: Thu Jan 3 10:51:15 2008 +0800
10958 Add Ctrl combo key support to usb keyboard driver.
10960 Ctrl combo key support is added, which is very useful to input Ctrl-C
10961 for interrupt current job.
10962 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
10963 key input when tstc() is called.
10965 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
10966 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
10968 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
10969 Author: Wolfgang Denk <wd@denx.de>
10970 Date: Wed Jan 9 13:43:38 2008 +0100
10972 Coding Style clenaup; update CHANGELOG
10974 Signed-off-by: Wolfgang Denk <wd@denx.de>
10976 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
10977 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10978 Date: Thu Dec 27 17:13:11 2007 +0100
10980 Remove bit swapping in Xilinx Spartan bitfile loading
10982 This patch removes the unnecessary bit swapping when
10983 booting .bit files with the 'fpga loadb' command.
10985 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10987 commit 437fc7327f0611f82937858f2d80e4cd61b40984
10988 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10989 Date: Thu Dec 27 17:13:05 2007 +0100
10991 Fix MSB check in Xilinx Spartan slave serial mode
10993 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10995 commit 3bff4ffa33729a42645e328a21e8d16488872958
10996 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10997 Date: Thu Dec 27 17:12:56 2007 +0100
10999 Add new Xilinx Spartan FPGA types
11001 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11003 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
11004 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11005 Date: Thu Dec 27 17:12:43 2007 +0100
11007 Add pre and post configuration callbacks for Spartan FPGAs
11009 This patch adds a post configuration callback for Spartan2/3 FPGAs.
11010 pre and post configuration callback are now optional and
11011 not called when the function pointer is set to NULL.
11013 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11015 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
11016 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11017 Date: Thu Dec 27 17:12:34 2007 +0100
11019 Improve configuration of FPGA subsystem
11021 This patch removes the FPGA subsystem configuration through
11022 the CONFIG_FPGA bitmask configuration option.
11024 See README for the new options:
11027 CONFIG_FPGA_<vendor>,
11028 CONFIG_FPGA_<family>
11030 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11032 commit 95c6bc7d4a3588b452baca610f8c795a83630477
11033 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11034 Date: Thu Dec 27 16:55:17 2007 +0100
11036 Add Epson RX8025 RTC support
11038 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11040 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
11041 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11042 Date: Thu Dec 27 16:57:23 2007 +0100
11044 serial: Make default_serial_console() a weak function
11046 With this patch it is possible to reimplement default_serial_console()
11047 in board specific code. This will be done in the upcomming PMC440
11048 U-Boot port. This also allows the lwmon board maintainer to
11049 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
11051 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11053 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
11054 Author: Harald Welte <laforge@openmoko.org>
11055 Date: Wed Dec 19 14:14:47 2007 +0100
11057 add 'terminal program' functionality
11059 This patch adds a 'cu' like serial terminal command to u-boot
11060 using which you can access other serial ports from the system console.
11062 OpenMoko uses this in their Neo1973 phones to get access to the GSM
11063 Modem and GPS chip from the bootloader.
11065 Signed-off-by: Harald Welte <laforge@openmoko.org>
11067 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
11068 Author: Harald Welte <laforge@openmoko.org>
11069 Date: Wed Dec 19 14:12:53 2007 +0100
11071 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
11072 that used to exist with the legacy NAND code
11074 Signed-off-by: Harald Welte <laforge@openmoko.org>
11076 commit f540c42d9564854b19ce9bbb70affe172529fe70
11077 Author: Harald Welte <laforge@openmoko.org>
11078 Date: Wed Dec 19 14:09:58 2007 +0100
11080 Fix building with CRAMFS but not JFFS2 support
11082 Signed-off-by: Harald Welte <laforge@openmoko.org>
11084 commit 23d0baf967fecdaf1804f045f6339337c5607eec
11085 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11086 Date: Sat Dec 22 15:52:58 2007 +0100
11088 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
11090 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11091 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11093 commit 23776ff292966a85d811126933830bed48211826
11094 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11095 Date: Tue Dec 11 10:53:12 2007 +0100
11097 ARM: support board-specific ethernet PHY init
11099 Add until the new phylib will be arrived
11101 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11103 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
11104 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11105 Date: Sat Dec 8 16:34:08 2007 +0100
11107 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
11109 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11111 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
11112 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11113 Date: Sun Dec 9 11:01:10 2007 +0100
11115 Add missing file in gitignore and comments
11117 based on Linux source tree's .gitignore files
11119 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11121 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
11122 Author: Wolfgang Denk <wd@denx.de>
11123 Date: Wed Jan 9 11:36:21 2008 +0100
11125 Coding Style cleanup, update CHANGELOG
11127 Signed-off-by: Wolfgang Denk <wd@denx.de>
11129 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
11130 Author: Stefan Roese <sr@denx.de>
11131 Date: Wed Jan 9 10:38:58 2008 +0100
11133 POST: Execute SPR test after relocation
11135 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
11136 self modifying code and this doesn't work with stack in d-cache, since
11137 I can't move the code from d-cache to i-cache. We move the SPR test to
11138 be executed a little later, after relocation. Then stack is located in
11139 SDRAM and this self-modifying code is no problem anymore.
11141 Signed-off-by: Stefan Roese <sr@denx.de>
11143 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
11144 Author: Stefan Roese <sr@denx.de>
11145 Date: Wed Jan 9 10:28:20 2008 +0100
11147 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
11149 This patch configures the LWMON5 port to use d-cache as init-ram and
11150 the unused GPT0_COMP6 as POST WORD storage.
11152 Signed-off-by: Stefan Roese <sr@denx.de>
11154 commit 1754f50b710194f886b6f2831803d8960171a14d
11155 Author: Stefan Roese <sr@denx.de>
11156 Date: Wed Jan 9 10:25:46 2008 +0100
11158 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
11160 The privious 4xx POST implementation only supported storing the POST
11161 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
11162 we need to store the POST WORD in some other non volatile location.
11163 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
11166 Signed-off-by: Stefan Roese <sr@denx.de>
11168 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
11169 Author: Stefan Roese <sr@denx.de>
11170 Date: Wed Jan 9 10:23:16 2008 +0100
11172 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
11174 This patch adds support for locking the init-ram/stack in d-cache,
11175 so that other regions may use d-cache as well
11177 Note, that this current implementation locks exactly 4k of d-cache,
11178 so please make sure that you don't define a bigger init-ram area. Take
11179 a look at the lwmon5 440EPx implementation as a reference.
11181 Signed-off-by: Stefan Roese <sr@denx.de>
11183 commit 0ddb89601a8d29e808db450366752ffdc6267c53
11184 Author: Wolfgang Denk <wd@denx.de>
11185 Date: Wed Jan 9 10:16:33 2008 +0100
11187 Fix memset bug in ext2fs_read_file()
11189 ext2fs_read_file() had the function arguments swapped.
11191 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
11193 Signed-off-by: Wolfgang Denk <wd@denx.de>
11195 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
11196 Author: Markus Klotzbücher <mk@denx.de>
11197 Date: Tue Jan 5 08:17:15 1988 +0100
11199 Fix problems with usb storage devices on MPC5200 /TQM5200
11201 The MPC5200 OHCI controller operates in big endian, so
11202 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
11204 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
11206 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
11207 Author: Wolfgang Denk <wd@denx.de>
11208 Date: Tue Jan 8 22:58:27 2008 +0100
11210 Fix compile problem with new env code.
11212 Signed-off-by: Wolfgang Denk <wd@denx.de>
11214 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
11215 Author: Markus Klotzbücher <mk@denx.de>
11216 Date: Tue Nov 27 10:23:20 2007 +0100
11218 tools: fix fw_printenv tool to compile again
11220 This patch updates the fw_printenv/fw_setenv userspace tool to include
11221 the correct MTD header in order to compile against current kernel
11222 headers. Backward compatibility is preserved by introducing an option
11223 MTD_VERSION which can be set to "old" for compilation using the old MTD
11224 headers. Along with this a number of warnings are fixed.
11226 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
11228 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
11229 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11230 Date: Tue Jan 8 15:40:09 2008 +0100
11232 ppc4xx: assign PCI interrupts on seuqoia boards
11234 Some operating systems rely on assigned PCI interrupts.
11236 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11238 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
11239 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11240 Date: Tue Jan 8 15:50:49 2008 +0100
11242 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
11244 This patch allows the use of 4xx interrupt vector number defines
11245 in board specific code outside cpu/ppc4xx.
11247 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11249 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
11250 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11251 Date: Tue Jan 8 15:39:01 2008 +0100
11253 ppc4xx: Fix UIC2 vector number base
11255 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11257 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
11258 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11259 Date: Tue Jan 8 12:49:58 2008 +0100
11261 ppc4xx: Update PLB/PCI divider for PMC440 board
11263 This patch updates the PLB/PCI divider when running at
11264 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
11266 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11268 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
11269 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11270 Date: Tue Jan 8 11:13:09 2008 +0100
11272 ppc4xx: Disable error message when no NAND chip is installed on PMC440
11274 Add CFG_NAND_QUIET_TEST option to disable error message when
11275 no NAND chip is installed on PMC440 boards.
11277 Disable a couple of config defines that are only used for NAND_U_BOOT.
11279 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11281 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
11282 Author: Wolfgang Denk <wd@denx.de>
11283 Date: Tue Jan 8 22:58:27 2008 +0100
11285 Fix compile problem with new env code.
11287 Signed-off-by: Wolfgang Denk <wd@denx.de>
11289 commit 6de66b35426312a21174a9bf0576a094e2904bea
11290 Author: Markus Klotzbücher <mk@denx.de>
11291 Date: Tue Nov 27 10:23:20 2007 +0100
11293 tools: fix fw_printenv tool to compile again
11295 This patch updates the fw_printenv/fw_setenv userspace tool to include
11296 the correct MTD header in order to compile against current kernel
11297 headers. Backward compatibility is preserved by introducing an option
11298 MTD_VERSION which can be set to "old" for compilation using the old MTD
11299 headers. Along with this a number of warnings are fixed.
11301 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
11303 commit ad3006fe7e84667021753b74247b0bafd97ba35f
11304 Author: Gerald Van Baren <vanbaren@cideas.com>
11305 Date: Mon Jan 7 23:47:32 2008 -0500
11307 LIBFDT: use memmove() instead of memcpy()
11309 This is partial patch from the DTC/libfdt
11310 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
11311 Author: David Gibson <david@gibson.dropbear.id.au>
11312 Date: Wed Nov 21 11:56:14 2007 +1100
11314 The patch also fixes one genuine bug caught by valgrind -
11315 _packblocks() in fdt_rw.c was using memcpy() where it should have been
11318 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11320 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
11321 Author: David Gibson <david@gibson.dropbear.id.au>
11322 Date: Mon Dec 17 14:42:07 2007 +1100
11324 libfdt: Add more documentation (patch the seventh)
11326 This patch adds more documenting comments to libfdt.h. Specifically,
11327 these document the read/write functions (not including fdt_open_into()
11328 and fdt_pack(), for now).
11330 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
11332 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
11333 Author: David Gibson <david@gibson.dropbear.id.au>
11334 Date: Mon Dec 17 14:41:52 2007 +1100
11336 libfdt: Add more documentation (patch the sixth)
11338 This patch adds some more documenting comments to libfdt.h.
11339 Specifically this documents all the write-in-place functions.
11341 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
11343 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
11344 Author: Gerald Van Baren <vanbaren@cideas.com>
11345 Date: Sat Dec 29 22:45:27 2007 -0500
11347 Fine grained per property /chosen updating.
11349 Implement a suggestion by Scott Wood to make the /chosen handling fine
11350 grained. Don't overwrite pre-existing properties on a per-property basis,
11351 so if /chosen exists but a necessary /chosen/property doesn't, it gets
11352 created. If a /chosen property exists, it is NOT overwritten unless the
11353 "force" flag is true.
11355 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11357 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
11358 Author: Gerald Van Baren <vanbaren@cideas.com>
11359 Date: Sat Jan 5 15:33:29 2008 -0500
11361 Improve the FDT help message.
11363 Add a note that "fdt copy" makes the new address active.
11364 Remove most of the extra hints at the end of the fdt help.
11366 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11368 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
11369 Author: Gerald Van Baren <vanbaren@cideas.com>
11370 Date: Sat Jan 5 14:52:04 2008 -0500
11372 Support setting FDT properties with optional values.
11374 Fix a bug found and documented by Bartlomiej Sieka where the optional
11375 value on "fdt set <path> <prop> [<val>]" wasn't optional.
11377 => fdt mknode / testnode
11378 => fdt print /testnode
11381 => fdt set /testnode testprop
11382 => fdt print /testnode
11387 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11389 commit 22fb2246df91bfc840d87f0c5910818bad55577a
11390 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11391 Date: Fri Dec 28 11:56:30 2007 +0100
11393 Add fdt_find_and_setprop() to fdt_support.h
11395 fdt_find_and_setprop() is used by several 4xx boards and it's
11396 missing in the appropriate header. This patch eliminates a
11397 warning when building U-Boot for such boards.
11399 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11400 Acked-by: Stefan Roese <sr@denx.de>
11402 commit 802b769bac17b0560d3535a42c502469ee190cd1
11403 Author: Stefan Roese <sr@denx.de>
11404 Date: Tue Jan 8 18:39:30 2008 +0100
11406 ppc4xx: Return 0 on success in 4xx ethernet driver
11408 Signed-off-by: Stefan Roese <sr@denx.de>
11410 commit 6775c68683a53c7abc778774641aac6f833a2cbf
11411 Author: Kim Phillips <kim.phillips@freescale.com>
11412 Date: Tue Jan 8 09:59:49 2008 -0600
11414 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
11416 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11418 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
11419 Author: Kim Phillips <kim.phillips@freescale.com>
11420 Date: Thu Dec 20 16:28:34 2007 -0600
11422 mpc83xx: rm remaining FLAT_TREE code
11424 ..in board pci.c files
11426 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11428 commit b3458d2cd55d01732e30a76d898afd99e871cd67
11429 Author: Kim Phillips <kim.phillips@freescale.com>
11430 Date: Thu Dec 20 15:57:28 2007 -0600
11432 mpc83xx: remove FLAT_TREE code
11434 need to rm it from pci code, too!
11436 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11438 commit 5b8bc606c61456566af6912f818a153b6b06f242
11439 Author: Kim Phillips <kim.phillips@freescale.com>
11440 Date: Thu Dec 20 14:09:22 2007 -0600
11442 mpc83xx: convert to using do_fixup_*()
11444 convert to using simpler mpc85xx style fdt update code; streamline by
11445 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
11446 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
11447 converted over to using libfdt).
11449 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11451 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
11452 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
11453 Date: Thu Dec 20 12:58:51 2007 -0500
11455 sbc8349: enable libfdt by default on WRS SBC8349 board.
11457 Make libfdt the default for the WRS SBC8349 board.
11458 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
11459 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
11461 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
11463 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
11464 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
11465 Date: Thu Dec 20 12:58:16 2007 -0500
11467 sbc8349: migrate board to libfdt
11469 This adds libfdt support code for the Wind River sbc8349 board.
11471 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
11472 the other Freescale 83xx boards.
11474 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
11476 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
11477 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
11478 Date: Thu Dec 20 12:56:19 2007 -0500
11480 sbc8349: Remove board specific ECC code
11482 ECC code is now shared for all 83xx boards, so remove board specific one.
11483 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
11485 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
11487 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
11488 Author: Kim Phillips <kim.phillips@freescale.com>
11489 Date: Thu Dec 20 01:30:48 2007 -0600
11491 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
11493 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
11495 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11497 commit ccf21c311e68d48399eff1e72936052885f6e3f7
11498 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
11499 Date: Thu Dec 6 16:43:40 2007 +0100
11501 Add support CONFIG_UEC_ETH3 in MPC83xx
11503 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
11505 commit e6af9932d31171e35db880e7b2f29f903b1b7660
11506 Author: Kumar Gala <galak@kernel.crashing.org>
11507 Date: Mon Nov 26 11:00:54 2007 -0600
11509 Remove CONFIG options related to OF that we dont use
11511 The MPC8360E MDS config defined:
11513 CONFIG_OF_HAS_UBOOT_ENV
11515 Which we don't use or ever needed. This seems like copy-paste feature creep.
11517 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11519 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
11520 Author: Kim Phillips <kim.phillips@freescale.com>
11521 Date: Mon Dec 10 14:16:22 2007 -0600
11523 mpc83xx: supress compiler warning
11525 mpc8360emds.c: In function ‘ft_board_setup’:
11526 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
11527 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
11529 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11531 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
11532 Author: Kim Phillips <kim.phillips@freescale.com>
11533 Date: Tue Nov 27 14:17:29 2007 -0600
11535 mpc83xx: fix remaining fdt_find_node_by_path references
11537 rename to fdt_path_offset
11539 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11541 commit 921d4b19ad1be704df58725485d9292dc0414adf
11542 Author: Kim Phillips <kim.phillips@freescale.com>
11543 Date: Mon Nov 19 12:30:09 2007 -0600
11545 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
11547 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
11548 This change guarantees that the environment will be located on the
11549 first flash sector after the U-Boot image.
11551 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11553 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
11554 Author: Kim Phillips <kim.phillips@freescale.com>
11555 Date: Fri Nov 9 14:28:08 2007 -0600
11557 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
11559 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
11560 properties in the device tree so the PHY gets configured for internal delay on
11561 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
11563 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11565 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
11566 Author: Dave Liu <r63238@freescale.com>
11567 Date: Tue Sep 18 12:41:15 2007 +0800
11569 mpc83xx: update the CREDITS and MAINTAINERS
11571 update the CREDITS and MAINTAINERS.
11573 Signed-off-by: Dave Liu <daveliu@freescale.com>
11575 commit b21add4b42af7b767448251b599b91066a160e0d
11576 Author: Dave Liu <r63238@freescale.com>
11577 Date: Tue Sep 18 12:40:21 2007 +0800
11579 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
11581 Add the MAINTAINER and MAKEALL entries for mpc837xemds
11583 Signed-off-by: Dave Liu <daveliu@freescale.com>
11585 commit f8900ce9094c462355eb792eea264ff16ac8fd16
11586 Author: Dave Liu <r63238@freescale.com>
11587 Date: Tue Sep 18 12:38:53 2007 +0800
11589 mpc83xx: Add the MPC837xEMDS board readme
11591 Add the README.mpc837xemds to /doc
11593 Signed-off-by: Dave Liu <daveliu@freescale.com>
11595 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
11596 Author: Dave Liu <r63238@freescale.com>
11597 Date: Tue Sep 18 12:37:57 2007 +0800
11599 mpc83xx: Add the support of MPC837xEMDS board
11601 The MPC837xEMDS board support:
11602 * DDR2 400MHz hardcoded and SPD init
11603 * Local bus NOR Flash
11604 * I2C, UART, MII and RTC
11608 Signed-off-by: Dave Liu <daveliu@freescale.com>
11610 commit 555da61702771fe0f76f3de23b4e7590f3704161
11611 Author: Dave Liu <r63238@freescale.com>
11612 Date: Tue Sep 18 12:36:58 2007 +0800
11614 mpc83xx: Add the support of MPC8315E SoC
11616 The MPC8315E SoC including e300c3 core and new IP blocks,
11617 such as TDM, PCI Express and SATA controller.
11619 Signed-off-by: Dave Liu <daveliu@freescale.com>
11621 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
11622 Author: Dave Liu <r63238@freescale.com>
11623 Date: Tue Sep 18 12:36:11 2007 +0800
11625 mpc83xx: Add the support of MPC837x SoC
11627 The MPC837x SoC including e300c4 core and new IP blocks,
11628 such as SDHC, PCI Express and SATA controller.
11630 Signed-off-by: Dave Liu <daveliu@freescale.com>
11632 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
11633 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
11634 Date: Wed Nov 14 18:54:53 2007 +0300
11636 MPC8360E-MDS: configure and enable second UART
11638 Despite user manual, BCSR9.7 is negated (high) on HRST, so
11639 UART2 is disabled. Fix that and configure QE pins properly.
11641 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
11643 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
11644 Author: Timur Tabi <timur@freescale.com>
11645 Date: Mon Nov 5 09:34:06 2007 -0600
11647 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
11649 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
11650 currently-defined 83xx boards. This change guarantees that the environment
11651 will be located on the first flash sector after the U-Boot image.
11653 Signed-off-by: Timur Tabi <timur@freescale.com>
11654 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
11656 commit e05329516a13616b53240cd85b739217c2bf87f1
11657 Author: Larry Johnson <lrj@acm.org>
11658 Date: Fri Jan 4 13:27:02 2008 -0500
11660 ppc4xx: Remove weak binding from common Denali data-eye search code
11662 Now that there are no board-specific versions of
11663 "denali_core_search_data_eye()", the weak binding on the common version
11666 Signed-off-by: Larry Johnson <lrj@acm.org>
11668 commit 5ba576c01602fd328800a427964c36a0a05c5dce
11669 Author: Stefan Roese <sr@denx.de>
11670 Date: Sat Jan 5 09:13:46 2008 +0100
11672 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
11674 Signed-off-by: Stefan Roese <sr@denx.de>
11676 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
11677 Author: Stefan Roese <sr@denx.de>
11678 Date: Sat Jan 5 09:12:41 2008 +0100
11680 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
11682 On Katmai the complete auto-calibration somehow doesn't seem to
11683 produce the best results, meaning optimal values for RQFD/RFFD.
11684 This was discovered by GDA using a high bandwidth scope,
11685 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
11686 so now on Katmai "only" RFFD is auto-calibrated.
11688 This patch also adds RDCC calibration as mentioned on page 7 of
11689 the AMCC PowerPC440SP/SPe DDR2 application note:
11690 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
11692 Signed-off-by: Stefan Roese <sr@denx.de>
11694 commit 49db47b8ae6afff2b898be312948ff501357dc80
11695 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11696 Date: Wed Jan 2 16:48:42 2008 +0100
11698 ppc4xx: Remove sdram.h from PMC440 board
11700 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11702 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
11703 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11704 Date: Wed Jan 2 16:48:34 2008 +0100
11706 ppc4xx: use common denali core defines and data eye search code for PMC440
11708 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11710 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
11711 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11712 Date: Wed Jan 2 12:05:14 2008 +0100
11714 ppc4xx: More cleanup for esd's LCD code
11716 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11718 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
11719 Author: Stefan Roese <sr@denx.de>
11720 Date: Fri Jan 4 12:00:01 2008 +0100
11722 ppc4xx: Fix Sequoia NAND booting target
11724 The Sequoia NAND booting target now uses the recently extracted
11725 cpu/ppc4xx/denali_data_eye.c file too.
11727 Signed-off-by: Stefan Roese <sr@denx.de>
11729 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
11730 Author: Lawrence R. Johnson <lrj@acm.org>
11731 Date: Thu Jan 3 15:02:02 2008 -0500
11733 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
11735 Signed-off-by: Larry Johnson <lrj@acm.org>
11737 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
11738 Author: Lawrence R. Johnson <lrj@acm.org>
11739 Date: Fri Jan 4 02:11:56 2008 -0500
11741 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
11743 Note: this patch changes the configuration of some GPIO registers:
11745 Register Old Value New Value
11746 --------------- ---------- ----------
11747 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
11748 DCR GPIO0_TSRH 0x55005000 0x00000000
11749 DCR GPIO1_TCR 0xC2000000 0xE2000000
11750 DCR GPIO1_TSRL 0x0C000000 0x00200000
11751 DCR GPIO1_ISR2L 0x00050000 0x00110000
11753 Signed-off-by: Larry Johnson <lrj@acm.org>
11755 commit 5ab884b254ca2e707ab50545cd705f30108cf491
11756 Author: Lawrence R. Johnson <lrj@acm.org>
11757 Date: Thu Jan 3 18:54:00 2008 -0500
11759 ppc4xx: Add functionality to GPIO support
11761 This patch makes two additions to GPIO support:
11763 First, it adds function gpio_read_in_bit() to read the a bit from the
11764 GPIO Input Register (GPIOx_IR) in the same way that function
11765 gpio_read_out_bit() reads a bit from the GPIO Output Register
11768 Second, it modifies function gpio_set_chip_configuration() to provide
11769 an additional option for configuring the GPIO from the
11770 "CFG_4xx_GPIO_TABLE".
11772 According to the 440EPx User's Manual, when an alternate output is used,
11773 the three-state control is configured in one of two ways, depending on
11774 the particular output. The first option is to select the corresponding
11775 alternate three-state control in the GPIOx_TRSH/L registers. The second
11776 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
11777 the GPIOx_TRSH/L registers, and set the corresponding bit in the
11778 GPIOx_TCR register to enable the output. For example, the Manual
11779 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
11780 the alternate three-state control (first option), and specifies
11781 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
11782 enabled in the GPIOx_TCR register (second option).
11784 Currently, gpio_set_chip_configuration() configures all alternate signal
11785 outputs to use the first option. This patch allow the second option to
11786 be selected by setting the "out_val" element in the table entry to
11787 "GPIO_OUT_1". The first option is used when the "out_val" element is
11788 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
11789 alternate signal is selected, and because all current GPIO tables set
11790 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
11791 not change any existing configurations.
11793 Signed-off-by: Larry Johnson <lrj@acm.org>
11795 commit 196404cdc1de495d6182e84731c200fc5748df15
11796 Author: Larry Johnson <lrj@arlinx.com>
11797 Date: Sun Dec 30 01:01:54 2007 -0500
11799 PPC4xx: Remove sdram.h from board/lwmon5
11801 These definitions are now in "include/ppc440.h".
11803 Signed-off-by: Larry Johnson <lrj@acm.org>
11805 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
11806 Author: Larry Johnson <lrj@arlinx.com>
11807 Date: Sun Dec 30 01:01:32 2007 -0500
11809 PPC4xx: Use common code for LWMON5 board SDRAM support
11811 This patch also modifies the functionality of the code so that the data-eye
11812 search is now done with with the cache disabled.
11814 Signed-off-by: Larry Johnson <lrj@acm.org>
11816 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
11817 Author: Larry Johnson <lrj@arlinx.com>
11818 Date: Sun Dec 30 01:01:14 2007 -0500
11820 PPC4xx: Remove sdram.h from board/amcc/sequoia
11822 These definitions are now in "include/ppc440.h".
11824 Signed-off-by: Larry Johnson <lrj@acm.org>
11826 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
11827 Author: Larry Johnson <lrj@arlinx.com>
11828 Date: Sun Dec 30 01:00:50 2007 -0500
11830 PPC4xx: Use common code for Sequoia board SDRAM support
11832 Signed-off-by: Larry Johnson <lrj@acm.org>
11834 commit 8b0c5c127690335758100c25eaec2b84db97c101
11835 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11836 Date: Thu Dec 27 16:58:41 2007 +0100
11838 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
11840 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
11841 networking stack does not automatically switch to
11842 another interface. This patch does not touch the default
11845 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11846 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11848 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
11849 Author: Upakul Barkakaty <upakul@gmail.com>
11850 Date: Thu Nov 29 12:16:13 2007 +0530
11852 NET: Proper return code handling in eth_init() function in file eth.c
11854 This patch modifies the return code handling in the eth_init()
11855 function, to be compatible with the handling of the return codes in
11856 the other network stack files. It now returns a 0 on Success and -1 on
11859 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
11860 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11862 commit 5ca2d0953e4579a80810966cca2077e20d912c97
11863 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
11864 Date: Mon Nov 19 20:27:04 2007 +0900
11866 net/eth.c: Fix env_enetaddr signed overflow
11868 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
11871 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
11879 Warning: NEC-Candy MAC addresses don't match:
11880 Address in SROM is 00:00:4C:80:92:A2
11881 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
11883 This patch changes env_enetaddr type from `char' to `unsigned char'.
11885 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
11886 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
11887 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11889 commit f85b60710571b37293d2233933b76e2aa3db5635
11890 Author: Rafal Jaworowski <raj@semihalf.com>
11891 Date: Thu Dec 27 18:19:02 2007 +0100
11893 Introduce new eth_receive routine
11895 The purpose of this routine is receiving a single network frame, outside of
11896 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
11897 U-Boot will let them utilise networking facilities. For sending a raw frame
11898 the already existing eth_send() can be used.
11900 The direct consumer of this routine is the newly introduced API layer for
11901 external applications (enabled with CONFIG_API).
11903 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
11904 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
11905 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11907 commit 5c740711f0ea5b51414b341b71597c4a0751be74
11908 Author: Jon Loeliger <jdl@freescale.com>
11909 Date: Thu Jan 3 10:41:04 2008 -0600
11911 8610: Move include of config.h earlier.
11913 Include config.h earlier in the set of #includes
11914 so as to avoid a incidental and duplicate definition
11915 of CFG_CACHELINE_SIZE.
11917 Signed-off-by: Jon Loeliger
11919 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
11920 Author: Jon Loeliger <jdl@freescale.com>
11921 Date: Tue Dec 4 10:53:34 2007 -0600
11923 Don't slam #undef DEBUG in the 8641HPCN config file.
11925 Doing so prevents it from being individually set
11926 and useful in other files.
11928 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11930 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
11931 Author: Jon Loeliger <jdl@freescale.com>
11932 Date: Wed Nov 28 14:47:18 2007 -0600
11934 Convert MPC8641HPCN to use libfdt.
11936 Assumes the presence of the aliases node in the DTS to
11937 locate the ethernet, pci and serial nodes for fixups.
11939 Use consistent fdtaddr and fdtfile in environment variables.
11941 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11943 commit ce37422d0002e10490e268392e0c4e3028e52cec
11944 Author: Stefan Roese <sr@denx.de>
11945 Date: Wed Jan 2 14:06:26 2008 +0100
11947 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
11949 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
11950 flash chips connected to a 32bit wide port.
11952 Signed-off-by: Stefan Roese <sr@denx.de>
11954 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
11955 Author: Wolfgang Denk <wd@denx.de>
11956 Date: Wed Jan 2 15:58:44 2008 +0100
11958 Fix compile problem introduced by "cleanup" commit 3dfd708c
11960 Signed-off-by: Wolfgang Denk <wd@denx.de>
11962 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
11963 Author: Wolfgang Denk <wd@denx.de>
11964 Date: Wed Jan 2 15:54:45 2008 +0100
11966 Make scripts and Makefiles POSIX compliant
11968 The bash builtin versions of the "test" (resp. "[") command allow
11969 using "==" for string comparisons, but POSIX compatible implemen-
11970 tations (like /usr/bin/test) insist on using "=" only. On such systems
11973 $ /usr/bin/test a == a && echo OK
11974 /usr/bin/test: ==: binary operator expected
11976 This patch fixes Makefiles and scripts to use POSIX style.
11978 Signed-off-by: Wolfgang Denk <wd@denx.de>
11980 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
11981 Author: Stefan Roese <sr@denx.de>
11982 Date: Wed Jan 2 14:05:37 2008 +0100
11984 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
11986 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
11987 flash chips connected to a 32bit wide port.
11989 Signed-off-by: Stefan Roese <sr@denx.de>
11991 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
11992 Author: Wolfgang Denk <wd@denx.de>
11993 Date: Wed Jan 2 12:38:43 2008 +0100
11995 Minor coding style cleanup.
11997 Signed-off-by: Wolfgang Denk <wd@denx.de>
11999 commit e174ac34adf5d5653df12bc3cf19c52063a71269
12000 Author: Stefan Roese <sr@denx.de>
12001 Date: Fri Dec 28 17:29:56 2007 +0100
12003 ppc4xx: Coding style cleanup
12005 Signed-off-by: Stefan Roese <sr@denx.de>
12007 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
12008 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12009 Date: Fri Dec 28 17:07:24 2007 +0100
12011 ppc4xx: Complete PMC440 board support
12013 This patch brings the PMC440 board configuration file.
12014 Finally it enables the PMC440 board support.
12016 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12018 commit 407843a582560fc5231299561ab3c2b6b6cd3397
12019 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12020 Date: Fri Dec 28 17:07:18 2007 +0100
12022 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
12024 This patch adds some BSP commands and FPGA booting support
12025 for esd's PMC440 boards.
12027 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12029 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
12030 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12031 Date: Fri Dec 28 17:07:14 2007 +0100
12033 ppc4xx: Add initial esd PMC440 board files
12035 This patch adds the first files for the new esd PMC440 boards.
12036 The next two patches will complete the PMC440 board support.
12038 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12040 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
12041 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12042 Date: Fri Dec 28 17:10:36 2007 +0100
12044 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
12046 - add EEPROM write protection for esd PLU405 boards.
12047 - initialize NAND GPIOs
12048 - use correct io accessors
12051 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12053 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
12054 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12055 Date: Fri Dec 28 17:10:44 2007 +0100
12057 ppc4xx: use correct io accessors for esd's LCD code
12059 This patch fixes esd's LCD dectection code to work correctly with
12060 newer gcc versions.
12062 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12064 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
12065 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12066 Date: Fri Dec 28 17:10:42 2007 +0100
12068 ppc4xx: Maintenance patch for VOH405 boards
12070 - add EEPROM write protection
12071 - initialize NAND GPIOs
12072 - use correct io accessors
12073 - slow down I2C clock to 100kHz
12074 - enable ext. I2C bus
12077 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12079 commit c05569066dbcba3fdf36d4d1943df265dc316a86
12080 Author: Stefan Roese <sr@denx.de>
12081 Date: Fri Dec 28 16:08:08 2007 +0100
12083 ppc4xx: Enable 405EP PCI arbiter per default on all boards
12085 In an attmemt to clean up the 4xx start.S file, I removed the enabling
12086 of the internal 405EP PCI arbiter. This is needed for multiple other
12087 405EP platforms, like most of the esd 405EP. Now the internal PCI
12088 arbiter is enabled again per default as it has been before.
12090 Signed-off-by: Stefan Roese <sr@denx.de>
12091 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12093 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
12094 Author: Stefan Roese <sr@denx.de>
12095 Date: Fri Dec 28 15:53:46 2007 +0100
12097 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
12099 Signed-off-by: Stefan Roese <sr@denx.de>
12100 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12102 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
12103 Author: Stefan Roese <sr@denx.de>
12104 Date: Fri Dec 28 06:06:04 2007 +0100
12106 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
12108 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
12109 platforms mentioned above.
12111 Signed-off-by: Stefan Roese <sr@denx.de>
12113 commit b568fd25574181a3b12ae3d66b2913903442cb83
12114 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12115 Date: Thu Dec 27 17:03:46 2007 +0100
12117 Remove CPCI440 board
12119 This board never left prototyping state and it
12120 became a millstone round my neck. So remove it.
12122 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12124 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
12125 Author: Larry Johnson <lrj@arlinx.com>
12126 Date: Thu Dec 27 11:28:51 2007 -0500
12128 Add support for Korat PPC440EPx board
12130 These patches add support for the PPC440EPx-based "Korat" board to
12131 U-Boot. They are based primarily on support for the Sequoia board.
12133 Signed-off-by: Larry Johnson <lrj@acm.org>
12135 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
12136 Author: Larry Johnson <lrj@arlinx.com>
12137 Date: Sat Dec 22 15:16:25 2007 -0500
12139 Add configuration file for Korat board
12141 This patch supplies the configuration file for the Korat PPC440EPx-
12144 Signed-off-by: Larry Johnson <lrj@acm.org>
12146 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
12147 Author: Larry Johnson <lrj@arlinx.com>
12148 Date: Sat Dec 22 15:16:11 2007 -0500
12150 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
12152 Signed-off-by: Larry Johnson <lrj@acm.org>
12154 commit aba19604d848b2838cfb9ebe818909e6a216058e
12155 Author: Larry Johnson <lrj@arlinx.com>
12156 Date: Thu Dec 27 10:54:48 2007 -0500
12158 Add 440EPx DDR2 SPD DIMM support
12160 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
12161 controller. It should also work on the 440GRx. It is based on the DDR2
12162 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
12164 This code has been tested on prototype Korat boards with three Kingston
12165 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
12166 (two ranks). The Korat board has a single DIMM socket, but support has
12167 been provided (though not tested) for boards with two DIMM sockets.
12169 Signed-off-by: Larry Johnson <lrj@acm.org>
12171 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
12172 Author: Larry Johnson <lrj@arlinx.com>
12173 Date: Sat Dec 22 15:15:30 2007 -0500
12175 Copy 440EPx/GRx SDRAM data-eye search to common directory
12177 This patch creates a non-board-specific file for performing the SDRAM
12178 data-eye search. It also adds ECC error checking to the test of valid
12179 data on readback when ECC is enabled.
12181 Signed-off-by: Larry Johnson <lrj@acm.org>
12183 commit c46f53333b22b1f9098676bea8884fc7db820cf3
12184 Author: Larry Johnson <lrj@arlinx.com>
12185 Date: Sat Dec 22 15:15:13 2007 -0500
12187 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
12189 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
12190 It also fixes two typos in the definitions, so the board-specific
12191 "sdram.h" files containing these definitions are also fixed to avoid
12194 Signed-off-by: Larry Johnson <lrj@acm.org>
12196 commit c348578bf612d0c56d8d376d23cae16defbd86af
12197 Author: Larry Johnson <lrj@arlinx.com>
12198 Date: Thu Dec 27 10:50:55 2007 -0500
12200 Add Ethernet 1000BASE-X support for PPC4xx
12202 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
12203 is defined, the PHY will advertise it's capabilities for autonegotiation
12204 based on the capabilities shown in the PHY's status registers, including
12205 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
12206 advertise hard-coded capabilities, as before.
12208 Signed-off-by: Larry Johnson <lrj@acm.org>
12210 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
12211 Author: Larry Johnson <lrj@arlinx.com>
12212 Date: Thu Dec 27 09:52:17 2007 -0500
12214 Add driver for National Semiconductor LM73 temperature sensor
12216 This driver is based on the driver for the LM75.
12218 Signed-off-by: Larry Johnson <lrj@acm.org>
12220 commit 12618278688ea9b3d76536960a5ad2e3790fac40
12221 Author: Larry Johnson <lrj@arlinx.com>
12222 Date: Sat Dec 22 15:14:00 2007 -0500
12224 Add driver for STMicroelectronics M41T60 RTC
12226 This driver is based on the driver for the M41T11. In the intended
12227 application, the RTC will be powered by a large capacitor, rather than a
12228 battery. The driver therefore checks to see whether the RTC has lost
12229 power. The chip's OUT bit is normally reset from its power-up state. If
12230 the OUT bit is read as set, or if the date and time are not valid, then the
12231 RTC is assumed to have lost power, and its date and time are reset to
12232 1900-01-01 00:00:00.
12234 Support for adjusting the speed of the clock to improve accuracy is
12235 provided through an environment variable.
12237 Signed-off-by: Larry Johnson <lrj@acm.org>
12239 commit d3471173e14b7544bb60339eda8d3d3906694b0a
12240 Author: Larry Johnson <lrj@arlinx.com>
12241 Date: Sat Dec 22 15:34:39 2007 -0500
12243 Use out_be32() and friends to access memory-mapped registers in sequoia.c
12245 Signed-off-by: Larry Johnson <lrj@acm.org>
12247 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
12248 Author: Larry Johnson <lrj@arlinx.com>
12249 Date: Sat Dec 22 15:34:20 2007 -0500
12251 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
12253 Signed-off-by: Larry Johnson <lrj@acm.org>
12255 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
12256 Author: Larry Johnson <lrj@arlinx.com>
12257 Date: Sat Dec 22 15:23:50 2007 -0500
12259 Cosmetic changes to ECC POST for AMCC Denali core
12261 Signed-off-by: Larry Johnson <lrj@acm.org>
12263 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
12264 Author: Stefan Roese <sr@denx.de>
12265 Date: Wed Dec 26 20:20:19 2007 +0100
12267 ppc4xx: Fix compilation problem in 405 cache POST test
12269 Signed-off-by: Stefan Roese <sr@denx.de>
12271 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
12272 Author: Stefan Roese <sr@denx.de>
12273 Date: Sat Dec 22 12:20:09 2007 +0100
12275 ppc4xx: Move virtual address of POST cache test to bigger address
12277 On Sequoia & LWMON5 the virtual address of the POST cache test is now
12278 moved to a bigger address. This enables usage of more memory on those
12281 Signed-off-by: Stefan Roese <sr@denx.de>
12283 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
12284 Author: Stefan Roese <sr@denx.de>
12285 Date: Sat Dec 22 12:18:26 2007 +0100
12287 ppc4xx: Fix problem in 44x cache POST routine
12289 As repoted by Larry Johnson, running "diag run cache" caused a crash
12290 in U-Boot. This problem was introduced by a patch that removed the
12291 TLB entry for the cache test after the test has completed. Since this
12292 TLB was only setup once, a 2nd attempt to run this cache test
12293 failed with a crash. Now this TLB entry is created every time the
12296 Signed-off-by: Stefan Roese <sr@denx.de>
12298 commit b0265b576bb8fa9465f99e99c323768b562fadc2
12299 Author: Stefan Roese <sr@denx.de>
12300 Date: Fri Dec 21 07:51:29 2007 +0100
12302 ppc4xx: Update Makalu fdt support
12304 Signed-off-by: Stefan Roese <sr@denx.de>
12306 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
12307 Author: Stefan Roese <sr@denx.de>
12308 Date: Wed Dec 19 09:05:40 2007 +0100
12310 ppc4xx: Add fdt support to AMCC Katmai eval board
12312 Signed-off-by: Stefan Roese <sr@denx.de>
12314 commit 328a340392a5df9aaf00792be989df73e750859e
12315 Author: Stefan Roese <sr@denx.de>
12316 Date: Tue Dec 18 08:44:51 2007 +0100
12318 ppc4xx: fdt: Cleanup setup of cpu node setup
12320 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
12321 without using the absolute path to the cpu node. This makes it possible
12322 to use this U-Boot version with both versions of cpu-node naming
12323 "cpu@0" and the former "PowerPC,440EPx@0".
12325 Signed-off-by: Stefan Roese <sr@denx.de>
12327 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
12328 Author: Stefan Roese <sr@denx.de>
12329 Date: Mon Dec 17 17:26:21 2007 +0100
12331 ppc4xx: Fix lwmon5 compilation problem
12333 Now that the 440EPx ECC test is not board specific anymore
12334 remove this Makefile.
12336 Signed-off-by: Stefan Roese <sr@denx.de>
12338 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
12339 Author: Anatolij Gustschin <agustschin@t-online.de>
12340 Date: Wed Dec 5 17:43:20 2007 +0100
12342 Fix ppc4xx clear_bss() code
12344 ppc4xx clear_bss() fails if BSS segment size is not
12345 divisible by 4 without remainder. This patch provides
12346 fix for this problem.
12348 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12350 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
12351 Author: Niklaus Giger <niklausgiger@gmx.ch>
12352 Date: Fri Nov 30 18:35:11 2007 +0100
12354 PPC4xx: Minimal changes to add vxWorks support
12356 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12358 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
12359 Author: Markus Klotzbücher <mk@denx.de>
12360 Date: Fri Nov 23 13:09:18 2007 +0100
12362 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
12364 When using dhcp/bootp the "netmask" environment variable is not
12365 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
12366 desireable, so the following patch adds this this option to the board
12369 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12370 Signed-off-by: Stefan Roese <sr@denx.de>
12372 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
12373 Author: Larry Johnson <lrj@arlinx.com>
12374 Date: Sat Oct 27 12:48:15 2007 -0400
12376 Fix/enhance ECC POST for 440EPx/GRx
12378 This patch allows the ECC POST to be used for different boards with the
12379 PPC440 Denali SDRAM controller. Modifications include skipping the test
12380 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
12381 to prevent timing errors.
12383 Signed-off-by: Larry Johnson <lrj@acm.org>
12385 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
12386 Author: Larry Johnson <lrj@arlinx.com>
12387 Date: Sat Oct 27 12:48:05 2007 -0400
12389 PPC4xx: Move/rename ECC POST for 440EPx/GRx
12391 Signed-off-by: Larry Johnson <lrj@acm.org>
12393 commit c29d2d3680046d430022c55e50fcb27f5866517e
12394 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12395 Date: Fri Dec 14 11:20:33 2007 +0100
12397 ppc4xx: use correct io accessors for 4xx ethernet POST
12399 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12401 commit ba79fde58a48c0a6ff8e2a96caba951594142203
12402 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12403 Date: Fri Dec 14 11:19:56 2007 +0100
12405 ppc4xx: fix flush + invalidate_dcache_range arguments
12407 flush + invalidate_dcache_range() expect the start and stop+1 address.
12408 So the stop address is the first address behind (!) the range.
12410 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12412 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
12413 Author: Stefan Roese <sr@denx.de>
12414 Date: Fri Dec 14 08:41:29 2007 +0100
12416 ppc4xx: fdt: use fdt_fixup_ethernet()
12418 By using aliases in the dts file, the ethernet node fixup is
12419 much easier with the recently added functions.
12421 Please note that the dts file needs the aliases for this to work.
12423 Signed-off-by: Stefan Roese <sr@denx.de>
12425 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
12426 Author: Stefan Roese <sr@denx.de>
12427 Date: Thu Dec 13 14:52:53 2007 +0100
12429 ppc4xx: Bring 4xx fdt support up-to-date
12431 This patch update the 4xx fdt support. It enabled fdt booting
12432 on the AMCC Kilauea and Sequoia for now. More can follow later
12435 Signed-off-by: Stefan Roese <sr@denx.de>
12437 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
12438 Author: Stefan Roese <sr@denx.de>
12439 Date: Thu Dec 27 07:50:54 2007 +0100
12441 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
12443 The check for an sufficiently erased destination was missing in the
12444 buffered write function of the cfi flash driver (when
12445 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
12446 writing to such a region will fail with the currect error message.
12448 Signed-off-by: Stefan Roese <sr@denx.de>
12450 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
12451 Author: Martin Krause <martin.krause@tqs.de>
12452 Date: Mon Nov 12 10:56:17 2007 +0100
12454 Some configuration updates for the TQM5200 based TB5200 board:
12456 - enable command line history
12457 - increase malloc space (because of bigger flash sectors)
12459 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12461 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
12462 Author: Martin Krause <martin.krause@tqs.de>
12463 Date: Thu Sep 27 11:10:08 2007 +0200
12465 TQM8xx: use the CFI flash driver on all TQM8xx boards
12467 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12469 commit 11d9eec479b470eab9242ab937fca70a876d9376
12470 Author: Martin Krause <martin.krause@tqs.de>
12471 Date: Wed Sep 26 17:55:56 2007 +0200
12473 TQM885D: adjust for doubled flash sector size + some minor fixes
12475 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12477 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
12478 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
12479 Date: Wed Sep 26 17:55:54 2007 +0200
12481 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
12483 CAS-Latency=2, Write Recovery Time tWR=2
12484 The max. supported bus frequency is 66 MHz. Therefore, changed
12485 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
12487 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12489 commit b988b8cd443989be65161888eea0127ad03f846f
12490 Author: Martin Krause <martin.krause@tqs.de>
12491 Date: Wed Sep 26 17:55:56 2007 +0200
12493 TQM885D: use calculated cpuclk instead of measuring it
12495 On the TQM885D the measurement of cpuclk with the PIT reference
12496 timer ist not necessary. Since all module variants use the same
12497 external 10 MHz oscillator, the cpuclk only depends on the PLL
12498 configuration - which is readable by software.
12500 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12502 commit 492c7049869348d31168de8dad89651315e468e0
12503 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
12504 Date: Thu Sep 27 14:54:46 2007 +0200
12506 TQM885D: fix SDRAM refresh
12508 At 133 MHz the current SDRAM refresh rate is too fast
12509 (measured 4 * 1.17 us).
12510 CFG_MAMR_PTA changes from 39 to 128. This result
12511 in a refresh rate of 4 * 7.8 us at the default clock
12512 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
12513 This is a compromise until a new method is found to
12514 adjust the refresh rate.
12516 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12518 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
12519 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
12520 Date: Thu Sep 27 14:54:46 2007 +0200
12522 TQM860M: Support for 10col SDRAMs, max. 128 MiB
12524 Signed-off-by: Martin Krause <martin.krause@tqs.de>
12526 commit 61fb15c516fef5631e305f1976d7b3a679725856
12527 Author: Wolfgang Denk <wd@denx.de>
12528 Date: Thu Dec 27 01:52:50 2007 +0100
12530 Fix coding style issues; update CHANGELOG.
12532 Signed-off-by: Wolfgang Denk <wd@denx.de>
12534 commit 467bcee11fe26ad422f2de971aa70866079870f2
12535 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12536 Date: Fri Dec 14 15:36:18 2007 +0100
12538 cfi_flash: Add manufacturer-specific fixups
12540 Run fixups based on the JEDEC manufacturer ID independent of the
12543 This changes current behaviour: Previously, geometry reversal for AMD
12544 chips were done based on the command set ID, while they are now done
12545 based on the JEDEC manufacturer and device ID.
12547 Also add fixup for top-boot Atmel chips. A fixup is needed for
12548 AT49BV6416(T) too, but since u-boot currently only reads the low byte
12549 of the device ID, there's no way to tell it apart from AT49BV642D,
12550 which should not have this fixup. Since AT49BV642D support is
12551 necessary to get ATNGW100 board support into mainline, I've commented
12552 out the fixup for now.
12554 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12556 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
12557 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12558 Date: Fri Dec 14 15:36:17 2007 +0100
12560 cfi_flash: Add cmdset-specific init functions
12562 Move things like reading JEDEC IDs and fixing up geometry reversal
12563 into separate functions. The geometry reversal fixup is now performed
12564 by altering the qry structure directly, which makes the sector init
12565 code slightly cleaner.
12567 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12569 commit e23741f4a6d8047520ef0d4971762749b3587d32
12570 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12571 Date: Fri Dec 14 15:36:16 2007 +0100
12573 cfi_flash: Read whole QRY structure in one go
12575 Read out the whole CFI Standard Query structure after successful cfi
12576 identification. This allows subsequent code to access this information
12577 directly without having to go through flash_read_uchar() and friends.
12579 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12581 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
12582 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12583 Date: Mon Dec 17 11:02:44 2007 +0100
12585 AVR32: Fix logic inversion in disable_interrupts()
12587 disable_interrupts() should return nonzero if interrupts were
12588 _enabled_ before, not disabled.
12590 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12592 commit acac475212cbedb17b321a363a1c878e2b47b37f
12593 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12594 Date: Fri Dec 14 16:51:22 2007 +0100
12596 AVR32: Enable interrupts at bootup
12598 The timer code depends on the timer interrupt to keep track of the
12599 upper 32 bits of the cycle counter. This obviously doesn't work when
12600 interrupts are disabled the whole time.
12602 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12604 commit 9570bcd87f4db255514f43b6701746c412f8fef0
12605 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12606 Date: Thu Nov 15 10:03:45 2007 +0100
12608 AVR32: Fix wrong pin setup for USART3
12610 As reported by Gerhard Berghofer:
12612 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
12613 instead of PB18 and PB19.
12615 which is obviously correct. There's currently no code that uses
12616 USART3, but custom boards may run into problems.
12618 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12620 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
12621 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12622 Date: Thu Nov 1 12:44:20 2007 +0100
12624 README: Remove ATSTK1000 daughterboard list
12626 As noted by Kim Phillips, these lists tend to become out of date.
12628 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12630 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
12631 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12632 Date: Tue Oct 30 14:56:36 2007 +0100
12634 Add ATSTK100[234] to MAINTAINERS
12636 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
12637 "mother". Also update the entry for ATSTK1000 to be not only about the
12638 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
12640 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12642 commit 64ff2357b1727213803591813dbc779c924bf772
12643 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12644 Date: Mon Oct 29 13:02:54 2007 +0100
12646 AVR32: Add support for the ATSTK1004 board
12648 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
12649 which is a derivative of AT32AP7000.
12651 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12653 commit 667568db157f374b85abd7e03596ddd1f0b25681
12654 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12655 Date: Mon Oct 29 13:02:54 2007 +0100
12657 AVR32: Add support for the ATSTK1003 board
12659 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
12660 which is a derivative of AT32AP7000.
12662 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12664 commit 5fee84a794a51ec830548cda485a770efb018b92
12665 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12666 Date: Mon Oct 29 13:23:33 2007 +0100
12668 AVR32: Make some AT32AP700x peripherals optional
12670 Add a chip-features file providing definitions of the form
12672 AT32AP700x_CHIP_HAS_<peripheral>
12674 to indicate the availability of the given peripheral on the currently
12677 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12679 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
12680 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12681 Date: Mon Oct 29 13:09:56 2007 +0100
12683 AVR32: Rename at32ap7000 -> at32ap700x
12685 The SoC-specific code for all the AT32AP700x CPUs is practically
12686 identical; the only difference is that some chips have less features
12687 than others. By doing this rename, we can add support for the AP7000
12688 derivatives simply by making some features conditional.
12690 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12692 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
12693 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12694 Date: Fri Jun 29 18:22:34 2007 +0200
12696 atmel_mci: Show SR when block read fails
12698 Show controller status as well as card status when an error occurs
12701 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12703 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
12704 Author: Stefan Roese <sr@denx.de>
12705 Date: Thu Dec 13 14:52:53 2007 +0100
12707 ppc4xx: Bring 4xx fdt support up-to-date
12709 This patch update the 4xx fdt support. It enabled fdt booting
12710 on the AMCC Kilauea and Sequoia for now. More can follow later
12713 Signed-off-by: Stefan Roese <sr@denx.de>
12715 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
12716 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12717 Date: Thu Dec 13 12:56:34 2007 +0100
12719 cfi_flash: Use map_physmem() and unmap_physmem()
12721 Use map_physmem() and unmap_physmem() to convert from physical to
12722 virtual addresses. This gives the arch a chance to provide an uncached
12723 mapping for flash accesses.
12725 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12727 commit 4d7d6936eb29af7cca330937808312aa5f61454d
12728 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12729 Date: Thu Dec 13 12:56:33 2007 +0100
12731 Introduce map_physmem() and unmap_physmem()
12733 map_physmem() returns a virtual address which can be used to access a
12734 given physical address without involving the cache. unmap_physmem()
12735 should be called when the virtual address returned by map_physmem() is
12738 This patch adds a stub implementation which simply returns the
12739 physical address cast to a uchar * for all architectures except AVR32,
12740 which converts the physical address to an uncached virtual mapping.
12741 unmap_physmem() is a no-op on all architectures, but if any
12742 architecture needs to do such mappings through the TLB, this is the
12743 hook where those TLB entries can be invalidated.
12745 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12747 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
12748 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12749 Date: Thu Dec 13 12:56:32 2007 +0100
12751 cfi_flash: Introduce read and write accessors
12753 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
12754 them to access the flash memory. This makes it clearer when the flash
12755 is actually being accessed; merely dereferencing a volatile pointer
12756 looks just like any other kind of access.
12758 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12760 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
12761 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12762 Date: Thu Dec 13 12:56:31 2007 +0100
12764 Implement __raw_{read,write}[bwl] on all architectures
12766 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
12767 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
12770 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12772 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
12773 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12774 Date: Sat Oct 6 18:55:36 2007 +0200
12776 cfi_flash: Reorder functions and eliminate extra prototypes
12778 Reorder the functions in cfi_flash.c so that each function only uses
12779 functions that have been defined before it. This allows the static
12780 prototype declarations near the top to be eliminated and might allow
12781 gcc to do a better job inlining functions.
12783 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12785 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
12786 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12787 Date: Thu Dec 13 12:56:29 2007 +0100
12789 cfi_flash: Make some needlessly global functions static
12791 Make functions not declared in any header file static.
12793 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12795 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
12796 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12797 Date: Thu Dec 13 12:56:28 2007 +0100
12799 cfi_flash: Break long lines
12801 This patch tries to keep all lines in the cfi_flash driver below 80
12802 columns. There are a few lines left which don't fit this requirement
12803 because I couldn't find any trivial way to break them (i.e. it would
12804 take some restructuring, which I intend to do in a later patch.)
12806 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12808 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
12809 Author: Bartlomiej Sieka <tur@semihalf.com>
12810 Date: Tue Dec 11 13:59:57 2007 +0100
12812 CFI: synchronize command offsets with Linux CFI driver
12814 Fixes non-working CFI Flash on the Inka4x0 board.
12816 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
12818 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
12819 Author: Kumar Gala <galak@kernel.crashing.org>
12820 Date: Fri Dec 7 12:17:34 2007 -0600
12822 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
12824 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
12825 (MPC8544DS, MPC8548CDS, MPC8568MDS).
12827 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12829 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
12830 Author: Kumar Gala <galak@kernel.crashing.org>
12831 Date: Fri Dec 7 12:04:30 2007 -0600
12833 Update Freescale MPC85xx ADS/CDS/MDS board config
12835 * Enabled CONFIG_CMD_ELF
12837 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12839 commit d435793229ce29a42797c1edc39f5b34f987f91a
12840 Author: Kumar Gala <galak@kernel.crashing.org>
12841 Date: Fri Dec 7 04:59:26 2007 -0600
12843 Handle Asynchronous DDR clock on 85xx
12845 The MPC8572 introduces the concept of an asynchronous DDR clock with
12846 regards to the platform clock.
12848 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
12851 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12853 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
12854 Author: Kumar Gala <galak@kernel.crashing.org>
12855 Date: Thu Nov 29 10:34:28 2007 -0600
12857 Update Freescale MPC85xx ADS/CDS/MDS board config
12859 * Removed some misc environment setup
12860 * Enabled CONFIG_CMDLINE_EDITING
12862 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12864 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
12865 Author: Kumar Gala <galak@kernel.crashing.org>
12866 Date: Thu Nov 29 10:47:44 2007 -0600
12868 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
12870 Minor path corrections needed to ensure buildability.
12872 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12874 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
12875 Author: Kumar Gala <galak@kernel.crashing.org>
12876 Date: Thu Nov 29 10:16:18 2007 -0600
12878 Move the MPC8540 ADS board under board/freescale.
12880 Minor path corrections needed to ensure buildability.
12882 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12884 commit 870ceac5b3a3486c109396e005af81ae762b5710
12885 Author: Kumar Gala <galak@kernel.crashing.org>
12886 Date: Thu Nov 29 10:14:50 2007 -0600
12888 Move the MPC8560 ADS board under board/freescale.
12890 Minor path corrections needed to ensure buildability.
12892 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12894 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
12895 Author: Kumar Gala <galak@kernel.crashing.org>
12896 Date: Thu Nov 29 10:13:47 2007 -0600
12898 Move the MPC8568 MDS board under board/freescale.
12900 Minor path corrections needed to ensure buildability.
12902 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12904 commit a853d56c59b33415304531443633808736acfc6e
12905 Author: Kumar Gala <galak@kernel.crashing.org>
12906 Date: Thu Nov 29 02:18:59 2007 -0600
12908 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
12910 We already had defines for LAWAR_TRGT_IF_* that we should use
12911 rather than creating new ones. Also, added some missing defines for
12914 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12916 commit 04db400892da37b76a585e332a0c137954ad2015
12917 Author: Kumar Gala <galak@kernel.crashing.org>
12918 Date: Thu Nov 29 02:10:09 2007 -0600
12920 Stop using immap_t on 85xx
12922 In the future the offsets to various blocks may not be in same location.
12923 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
12924 instead of getting it via &immap.
12926 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12928 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
12929 Author: Kumar Gala <galak@kernel.crashing.org>
12930 Date: Thu Nov 29 01:23:09 2007 -0600
12932 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
12934 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12936 commit c480861bf000156e6a3e932c258db59ff2212dd3
12937 Author: Kumar Gala <galak@kernel.crashing.org>
12938 Date: Thu Nov 29 01:06:19 2007 -0600
12940 Update MPC8568 MDS to use libfdt
12942 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
12943 ethernet, pci, and serial for the various fixups that are done.
12945 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12947 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
12948 Author: Haiying Wang <Haiying.Wang@freescale.com>
12949 Date: Wed Nov 14 15:52:06 2007 -0500
12951 Add PCI Express support on MPC8568MDS
12953 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
12954 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12956 commit b90d25497625b90ffa3f2911a0895ca237556ff5
12957 Author: Kumar Gala <galak@kernel.crashing.org>
12958 Date: Thu Nov 29 00:11:44 2007 -0600
12960 Update MPC85xx CDS to use libfdt
12962 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
12963 ethernet, pci, and serial for the various fixups that are done.
12965 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12967 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
12968 Author: Kumar Gala <galak@kernel.crashing.org>
12969 Date: Wed Nov 28 22:54:27 2007 -0600
12971 Update MPC8540 ADS to use libfdt
12973 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
12974 ethernet, pci, and serial for the various fixups that are done.
12976 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12978 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
12979 Author: Kumar Gala <galak@kernel.crashing.org>
12980 Date: Wed Nov 28 22:40:31 2007 -0600
12982 Update MPC8560 ADS to use libfdt
12984 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
12985 ethernet, pci, and serial for the various fixups that are done.
12987 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12989 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
12990 Author: Kumar Gala <galak@kernel.crashing.org>
12991 Date: Wed Nov 28 00:36:33 2007 -0600
12993 Stop using immap_t for cpm offset on 85xx
12995 In the future the offsets to various blocks may not be in same location.
12996 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
12997 instead of getting it via &immap->im_cpm.
12999 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13001 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
13002 Author: Kumar Gala <galak@kernel.crashing.org>
13003 Date: Tue Nov 27 23:25:02 2007 -0600
13005 Stop using immap_t for guts offset on 85xx
13007 In the future the offsets to various blocks may not be in same location.
13008 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
13009 instead of getting it via &immap->im_gur.
13011 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13013 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
13014 Author: Kumar Gala <galak@kernel.crashing.org>
13015 Date: Tue Nov 27 22:42:34 2007 -0600
13017 Update MPC8544 DS config
13019 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
13020 * Removed some misc environment setup
13021 * Moved to using fdtfile & fdtaddr as fdt env var names
13022 * Enabled CONFIG_CMDLINE_EDITING
13024 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13026 commit addce57e2e4c49e77ffb2020a84690713bb18b47
13027 Author: Kumar Gala <galak@kernel.crashing.org>
13028 Date: Mon Nov 26 17:12:24 2007 -0600
13030 Update MPC8544DS to use libfdt
13032 Updated the MPC8544DS config to use libfdt and assume use of aliases for
13033 ethernet, pci, and serial for the various fixups that are done.
13035 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13037 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
13038 Author: Kumar Gala <galak@kernel.crashing.org>
13039 Date: Thu Nov 29 00:15:30 2007 -0600
13041 Add libfdt based ft_cpu_setup for mpc85xx
13043 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13045 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
13046 Author: Stefan Roese <sr@denx.de>
13047 Date: Tue Dec 11 13:38:19 2007 +0100
13049 ppc4xx: Correct GPIO offset in gpio_config()
13051 Thanks to Gary Jennejohn for pointing this out.
13053 Signed-off-by: Stefan Roese <sr@denx.de>
13055 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
13056 Author: Stefan Roese <sr@denx.de>
13057 Date: Tue Dec 11 11:46:01 2007 +0100
13059 rtc: Fix merging problem
13061 Signed-off-by: Stefan Roese <sr@denx.de>
13063 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
13064 Author: Stefan Roese <sr@denx.de>
13065 Date: Sat Dec 8 14:47:34 2007 +0100
13067 ppc4xx: 405EX: Correctly enable USB pins
13069 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
13070 function control) registers. This is done for the AMCC Kilauea and
13071 Makalu eval boards.
13073 Signed-off-by: Stefan Roese <sr@denx.de>
13075 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
13076 Author: Stefan Roese <sr@denx.de>
13077 Date: Sat Dec 8 08:25:09 2007 +0100
13079 CFI: Coding style cleanup
13081 Signed-off-by: Stefan Roese <sr@denx.de>
13083 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
13084 Author: Michael Schwingen <michael@schwingen.org>
13085 Date: Fri Dec 7 23:35:02 2007 +0100
13087 CFI: support JEDEC flash roms in CFI-flash framework
13089 The following patch adds support for non-CFI flash ROMS, by hooking into the
13090 CFI flash code and using most of its code, as recently discussed here in the
13091 thread "Mixing CFI and non-CFI flashs".
13093 Signed-off-by: Michael Schwingen <michael@schwingen.org>
13094 Signed-off-by: Stefan Roese <sr@denx.de>
13096 commit c01b17dd856fa120b2970f50d9598546a4927ec3
13097 Author: Gerald Van Baren <vanbaren@cideas.com>
13098 Date: Wed Nov 28 21:24:50 2007 -0500
13100 Conditionally compile fdt_fixup_ethernet()
13102 Fix compiler warnings: On boards that don't have ethernets defined,
13103 don't compile fdt_fixup_ethernet().
13105 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
13106 Author: Kumar Gala <galak@kernel.crashing.org>
13107 Date: Tue Nov 27 21:59:46 2007 -0600
13109 Convert boards that set memory node to use fdt_fixup_memory()
13111 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13113 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
13114 Author: Kumar Gala <galak@kernel.crashing.org>
13115 Date: Mon Nov 26 17:06:15 2007 -0600
13117 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
13119 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
13120 determine which serial alias we should set linux,stdout-path to.
13122 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13124 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
13125 Author: Kumar Gala <galak@kernel.crashing.org>
13126 Date: Mon Nov 26 14:57:45 2007 -0600
13128 Add common memory fixup function
13130 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
13132 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13134 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
13135 Author: Kumar Gala <galak@kernel.crashing.org>
13136 Date: Mon Nov 26 11:19:12 2007 -0600
13138 Conditionally compile fdt_support.c
13140 Modify common/Makefile to conditionally compile fdt_support.c based
13141 on CONFIG_OF_LIBFDT.
13143 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13145 commit d88e7ba0980773479e1a64badb293116071b7ef0
13146 Author: Kumar Gala <galak@kernel.crashing.org>
13147 Date: Mon Nov 26 10:41:40 2007 -0600
13149 Fix build breakage due to libfdt import
13151 The IDS8247 got lost in the update and need an API update
13152 do to rename of functions in libfdt.
13154 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13156 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
13157 Author: Gerald Van Baren <vanbaren@cideas.com>
13158 Date: Fri Nov 23 19:43:20 2007 -0500
13160 Add spaces around the = in the fdt print format.
13162 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
13164 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
13165 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13166 Date: Fri Dec 7 01:25:38 2007 +0900
13168 sh: Moved driver of the SuperH dependence
13170 The composition of the directory in the drivers/ changed.
13171 I moved SuperH serial driver and marubun PCMCIA driver.
13173 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13175 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
13176 Author: Wolfgang Denk <wd@denx.de>
13177 Date: Thu Dec 6 10:21:19 2007 +0100
13181 Signed-off-by: Wolfgang Denk <wd@denx.de>
13183 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
13184 Author: Wolfgang Denk <wd@denx.de>
13185 Date: Thu Dec 6 10:21:03 2007 +0100
13187 ADS5121 Board: fix compile problem.
13189 Signed-off-by: Wolfgang Denk <wd@denx.de>
13191 commit a27044b14a9e93678a82d7b35f202b93e7687abc
13192 Author: Stefan Roese <sr@denx.de>
13193 Date: Thu Dec 6 05:58:43 2007 +0100
13195 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
13197 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
13198 setting the FIXD bit in the SDR0_MFR register. Here a description of the
13201 Problem Description
13202 ------------------------------
13203 If a DMA is performed between memory and PCI with the DMA 1 Controller
13204 using prefetch, and as a result uses a special purpose buffer selected by
13205 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
13206 the first part of the transfer sequence is performed twice. The
13207 PPC440SPe PCI Controller requests more data than was needed such that in
13208 the case of enforce memory protection, a host CPU exception can occur.
13209 No data is corrupted, because data transfer is stopped in the PCI
13210 Controller. Prefetch enable is specified by setting DMA Configuration
13211 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
13213 Behavior that may be observed in a running system
13214 ---------------------------------------------------------------------------
13216 1. DMA performance is decreased because of the double access on the PCI bus
13218 2. If an illegal access to some address on the PCI bus is detected at the
13219 system level, a machine check or similar system error may occur.
13221 Workarounds Available
13222 ----------------------------------
13224 1. Do not program prefetch. Note that a prefetch command cannot be programmed
13225 without selecting a special purpose buffer.
13226 2. To avoid crossing a physical boundary of the PCI slave device, add 512
13227 bytes of address to the PCI address range.
13229 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
13230 from AMCC and slighly changed.
13232 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
13233 Signed-off-by: Stefan Roese <sr@denx.de>
13235 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
13236 Author: Stefan Roese <sr@denx.de>
13237 Date: Tue Dec 4 16:29:48 2007 +0100
13239 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
13241 Signed-off-by: Stefan Roese <sr@denx.de>
13243 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
13244 Author: Wolfgang Denk <wd@denx.de>
13245 Date: Mon Dec 3 00:15:28 2007 +0100
13247 Prepare for 1.3.1-rc1
13249 Signed-off-by: Wolfgang Denk <wd@denx.de>
13251 commit e15e33433e7c05111968dc9b434a52fd42cbd221
13252 Author: Stefan Roese <sr@denx.de>
13253 Date: Fri Nov 30 07:15:41 2007 +0100
13255 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
13257 This manual PCIe reset triggering solves the problem seen with the
13258 Intel EPRO/1000 card, which was not detected (link not established)
13259 upon power-up reset.
13261 Signed-off-by: Stefan Roese <sr@denx.de>
13263 commit 260eea5676ca46903a335686cc020b29c4ca46fe
13264 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13265 Date: Thu Nov 29 01:21:54 2007 +0900
13267 sh: Add SuperH boards maintainer to MAINTAINERS file
13269 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
13271 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13273 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
13274 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13275 Date: Thu Nov 29 00:13:04 2007 +0900
13277 sh: Add ms7750se support in MAKEALL
13279 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13281 commit c7144373427a178332bf9754131c8c34c52c200a
13282 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13283 Date: Tue Nov 27 09:44:53 2007 +0100
13285 sh: Add sh3 and sh4 support in MAKEALL
13287 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13288 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13290 commit 130080874a3d28450098481a262c5f7c855e908d
13291 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13292 Date: Sun Nov 25 02:51:17 2007 +0900
13294 sh: Add document for SuperH.
13296 This document is a summary of information concerning SuperH of U-Boot.
13298 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13300 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
13301 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13302 Date: Sun Nov 25 02:39:31 2007 +0900
13304 sh: Add marubun's pcmcia driver
13306 Marubun pcmcia is a chip for PCMCIA used with SuperH.
13307 Of course, this can be used even by other architectures.
13308 When use this driver, came to be able to use CompactFlash
13311 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13313 commit febd86b969b975289ed948f1ac0eb9722da41ced
13314 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13315 Date: Sun Nov 25 02:32:13 2007 +0900
13317 sh: Update SuperH SCIF driver
13319 - Changed volatile unsigned to vu_.
13320 - Changed Makefile for kconfig.
13322 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13324 commit 8be760903645af09871be50ad0a6f9ebb62b311d
13325 Author: Stefan Roese <sr@denx.de>
13326 Date: Tue Nov 27 11:57:35 2007 +0100
13328 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
13330 After an error in the AMCC 405EX users manual now correctly configure
13331 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
13334 Signed-off-by: Stefan Roese <sr@denx.de>
13336 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
13337 Author: Wolfgang Denk <wd@denx.de>
13338 Date: Mon Nov 26 19:18:21 2007 +0100
13340 Cleanup coding style; update CHANGELOG
13342 Signed-off-by: Wolfgang Denk <wd@denx.de>
13344 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
13345 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13346 Date: Sun Nov 25 22:39:25 2007 +0100
13348 MAKEALL: add missing 512x boards in ppc
13350 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13352 commit a340c325e668ca7386c2276387681720be9c3757
13353 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13354 Date: Sun Nov 25 18:45:47 2007 +0100
13356 Makefile : fix tags ctags etags with new drivers organization
13358 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13360 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
13361 Author: Stefan Roese <sr@denx.de>
13362 Date: Mon Nov 26 15:06:14 2007 +0100
13364 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
13366 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
13369 Signed-off-by: Stefan Roese <sr@denx.de>
13371 commit ca1ce226287270bb01e25b8e3674c701f12edf19
13372 Author: Stefan Roese <sr@denx.de>
13373 Date: Mon Nov 26 15:01:45 2007 +0100
13375 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
13377 Signed-off-by: Stefan Roese <sr@denx.de>
13379 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
13380 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13381 Date: Sun Nov 25 18:45:47 2007 +0100
13383 Makefile : fix tags ctags etags with new drivers organization
13385 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13387 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
13388 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13389 Date: Sat Nov 24 21:26:56 2007 +0100
13391 drivers/mtd : move mtd drivers to drivers/mtd
13393 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13395 commit 318c0b90431f2648552e5ade78833f42652ce859
13396 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13397 Date: Sat Nov 24 21:17:55 2007 +0100
13399 drivers/misc : move misc drivers to drivers/misc
13401 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13403 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
13404 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13405 Date: Sat Nov 24 21:13:59 2007 +0100
13407 drivers/block : move block drivers to drivers/block
13409 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13411 commit 0c698dcaa70275eb8814f665b545547cee013892
13412 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13413 Date: Sat Nov 24 20:59:50 2007 +0100
13415 drivers/rtc : move rtc drivers to drivers/rtc
13417 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13419 commit f868cc5a50757d94f36c312395481cb0f187d9e6
13420 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13421 Date: Sat Nov 24 20:14:44 2007 +0100
13423 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
13425 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13427 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
13428 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13429 Date: Sat Nov 24 19:46:45 2007 +0100
13431 drivers/input : move input drivers to drivers/input
13433 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13435 commit e4558666293364fc3af1c1d9381ca933fa0f1275
13436 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13437 Date: Sat Nov 24 19:40:11 2007 +0100
13439 drivers/usb : move usb drivers to drivers/usb
13441 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13443 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
13444 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13445 Date: Sat Nov 24 19:33:38 2007 +0100
13447 drivers/serial : move serial drivers to drivers/serial
13449 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13451 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
13452 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13453 Date: Wed Nov 21 21:19:24 2007 +0100
13455 drivers/net : move net drivers to drivers/net
13457 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13459 commit 352d259130b349fe9593b8dada641bd78a9659e5
13460 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13461 Date: Tue Nov 20 20:41:48 2007 +0100
13463 drivers/video : move video drivers to drivers/video
13465 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13467 commit 73646217186aa17afc8e305c5f06f06dd335eaad
13468 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13469 Date: Tue Nov 20 20:33:09 2007 +0100
13471 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
13473 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13475 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
13476 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13477 Date: Tue Nov 20 20:28:09 2007 +0100
13479 drivers/pci : move pci drivers to drivers/pci
13481 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13483 commit 9162352817579840d7802da6d85872b3ca003c97
13484 Author: Gerald Van Baren <vanbaren@cideas.com>
13485 Date: Thu Nov 22 17:23:23 2007 -0500
13487 Fix fdt printing for updated libfdt
13489 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
13491 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
13493 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
13494 Author: Kumar Gala <galak@kernel.crashing.org>
13495 Date: Wed Nov 21 13:30:15 2007 -0600
13497 Add additional fdt fixup helper functions
13499 Added the following fdt fixup helpers:
13500 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
13501 * do_fixup_by_compat{_u32} - Find matching nodes by compat
13503 The _u32 variants work the same only the property they are setting
13504 is know to be a 32-bit integer instead of a byte buffer.
13506 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13508 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
13509 Author: Kumar Gala <galak@kernel.crashing.org>
13510 Date: Wed Nov 21 11:11:03 2007 -0600
13512 Add fdt_fixup_ethernet helper to set mac addresses
13514 Added a fixup helper that uses aliases to set mac addresses
13515 in the device tree based on the bd_t
13517 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13519 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
13520 Author: Kumar Gala <galak@kernel.crashing.org>
13521 Date: Wed Nov 21 14:07:46 2007 -0600
13523 Fix warnings from import of libfdt
13525 cmd_fdt.c: In function fdt_print:
13526 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
13527 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
13528 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
13529 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
13531 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13533 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
13534 Author: Kumar Gala <galak@kernel.crashing.org>
13535 Date: Wed Oct 24 11:04:22 2007 -0500
13537 Update libfdt from device tree compiler (dtc)
13539 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
13540 the device tree compiler (dtc) project.
13542 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13544 commit e93becf80d732b64aef81b23e8b6ece02c40533d
13545 Author: Kumar Gala <galak@kernel.crashing.org>
13546 Date: Sat Nov 3 19:46:28 2007 -0500
13548 Move do_fixup* for libfdt into common code
13550 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
13551 into common/fdt_support.c and renamed:
13553 do_fixup() -> do_fixup_by_path()
13554 do_fixup_u32() -> do_fixup_by_path_u32()
13556 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13558 commit f738b4a75998f42a7408defadc9baac7a31c92db
13559 Author: Kumar Gala <galak@kernel.crashing.org>
13560 Date: Thu Oct 25 16:15:07 2007 -0500
13562 Make no options to fdt print default to '/'
13564 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13566 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
13567 Author: Kumar Gala <galak@kernel.crashing.org>
13568 Date: Wed Oct 24 10:21:57 2007 -0500
13570 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
13573 fdt_node_is_compatible
13574 fdt_find_node_by_type
13575 fdt_find_compatible_node
13577 To ease merge of newer libfdt as we aren't using them anywhere at this time.
13579 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
13582 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13584 commit 98e2867cc85409b919f862e6c16026461ec955df
13585 Author: Grant Likely <grant.likely@secretlab.ca>
13586 Date: Wed Nov 21 09:19:37 2007 -0700
13588 [BUILD] Remove libraries when updating autoconf.mk
13590 Fix library problems caused by conditional compilation. Using
13591 autoconf.mk to decide which files to compile has caused a problem when
13592 changing configuration from one board to another without clearing out
13593 the library (*.a) files.
13595 It used to be that the linker was always passed the same list of .o
13596 files when building the .a files. However, that is not longer true
13597 with conditional compilation. Now, a different board config will have
13598 a different file list passed to the linker. The problem occurs when
13599 a library has already been built and the board config is changed.
13601 Since the linker will update instead of replace a preexisting library,
13602 then if the file list changes to remove some object files the old
13603 objects will still exist in the library.
13605 The solution is to remove all old library files when autoconf.mk is
13608 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
13610 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
13611 Author: Kumar Gala <galak@kernel.crashing.org>
13612 Date: Wed Nov 21 08:49:50 2007 -0600
13614 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
13616 Modify libfdt/Makefile to conditionally compile the *.c files based
13617 on the board config.
13619 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13621 commit 4a43719a7738712811d822ca8125427b27a55cdc
13622 Author: Grant Likely <grant.likely@secretlab.ca>
13623 Date: Mon Sep 24 09:05:31 2007 -0600
13625 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
13627 Modify common/Makefile to conditionally compile the cmd_*.c files based
13628 on the board config.
13630 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
13632 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
13633 Author: Grant Likely <grant.likely@secretlab.ca>
13634 Date: Mon Sep 24 09:05:31 2007 -0600
13636 [BUILD] Generate include/autoconf.mk from board config files
13638 Use cpp and sed to postprocess config.h and import the defined values
13639 into include/autoconf.mk. autoconf.mk is then included by config.mk to
13640 give 'make' access to the board configuration.
13642 Doing this enables conditional compilation at the Makefile level instead
13643 of by wrapping every .c file with #ifdef/#endif wrappers.
13645 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
13647 commit 68b88999da87ab88e71e1306192905be3450198e
13648 Author: Jon Loeliger <jdl@freescale.com>
13649 Date: Tue Nov 20 15:02:26 2007 -0600
13651 8610HPCD: Enable the 8610 Display Interface Unit
13653 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13655 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
13656 Author: Jon Loeliger <jdl@freescale.com>
13657 Date: Tue Nov 20 15:00:53 2007 -0600
13659 Move 8610 DIU interface structure definitions to header file.
13661 These two structures are still needed during the
13662 initialization and setup of the DIU hardware.
13663 So move them to the fsl_diu_fb.h file for now.
13666 Noticed-by: York Sun <yorksun@freescale.com>
13667 Signed-off-by: Jon Loeliger <jdl@freescale.com>
13669 commit 080c646dbf474a109c3f85718fb01ce042a38c45
13670 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13671 Date: Tue Nov 20 20:14:18 2007 +0100
13673 drivers/i2c : move i2c drivers to drivers/i2c
13675 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13677 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
13678 Author: Wolfgang Denk <wd@denx.de>
13679 Date: Mon Nov 19 22:20:24 2007 +0100
13681 Prepare for 1.3.0 release.
13683 Signed-off-by: Wolfgang Denk <wd@denx.de>
13685 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
13686 Author: Haiying Wang <Haiying.Wang@freescale.com>
13687 Date: Mon Nov 19 10:02:13 2007 -0500
13689 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
13691 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
13693 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
13695 commit f8c320609366176b31104d9bf5e295232e1c7f1d
13696 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
13697 Date: Mon Nov 19 11:14:16 2007 +0900
13699 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
13701 lowlevel_init.S: Assembler messages:
13702 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
13704 Looking at codes, the `memtest' and `clearmem' are intentional mixed
13705 use of `global symbols' and `label' for debugging purpose. To make it
13706 build, just disable global-symbols-use for now. As a result `memtest'
13707 still remains as unused, but leave it be...
13709 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
13711 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
13712 Author: Wolfgang Denk <wd@denx.de>
13713 Date: Mon Nov 19 12:59:14 2007 +0100
13715 Fix build problems with mp2usb board
13717 Signed-off-by: Wolfgang Denk <wd@denx.de>
13719 commit 6bf4c686afca1e86e1c384d59218f914605713bf
13720 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13721 Date: Sun Nov 18 18:36:11 2007 +0100
13723 s3c24x0: Fix usb_ohci.c missing in Makefile
13724 and usb_ohci.c warning differ in signedness
13726 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13728 commit 6073f61e078da5ddb521b56256bcc36508589883
13729 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13730 Date: Sun Nov 18 12:55:02 2007 +0100
13732 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
13734 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13736 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
13737 Author: Wolfgang Denk <wd@denx.de>
13738 Date: Sun Nov 18 17:11:09 2007 +0100
13740 Fix compiler warnings for ARM systems.
13742 Signed-off-by: Wolfgang Denk <wd@denx.de>
13744 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
13745 Author: Wolfgang Denk <wd@denx.de>
13746 Date: Sun Nov 18 16:36:27 2007 +0100
13748 Fix compiler warnings for PPC systems. Update CHANGELOG.
13750 Signed-off-by: Wolfgang Denk <wd@denx.de>
13752 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
13753 Author: Stefan Roese <sr@denx.de>
13754 Date: Sun Nov 18 14:44:44 2007 +0100
13756 ppc4xx: Correct 405EX PCIe UTL register mapping
13758 Map 4k mem space for UTL registers for each port.
13760 Signed-off-by: Stefan Roese <sr@denx.de>
13762 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
13763 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13764 Date: Sat Nov 17 11:31:10 2007 +0100
13766 Fix warning differ in signedness in net/net.c and net/nfs.c
13768 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
13769 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13770 Date: Sat Nov 17 20:42:45 2007 +0900
13772 gth2.c: Fix a warning on gth2 build.
13774 gth2.c: In function 'misc_init_r':
13775 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
13777 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13779 commit 2309c130aa4c84b91bd874a41269c923eb61b555
13780 Author: Stefan Roese <sr@denx.de>
13781 Date: Sat Nov 17 07:58:25 2007 +0100
13783 Fix warning differ in signedness in common/cmd_scsi.c
13785 Signed-off-by: Stefan Roese <sr@denx.de>
13787 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
13788 Author: Stefan Roese <sr@denx.de>
13789 Date: Sat Nov 17 14:52:29 2007 +0100
13791 ppc4xx: Update AMCC Kilauea config file
13793 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
13795 Signed-off-by: Stefan Roese <sr@denx.de>
13797 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
13798 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13799 Date: Sat Nov 17 20:05:26 2007 +0900
13801 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
13803 Current trick to pick up GNU assembler minor version does not work with the
13804 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
13807 $ sde-as --version |grep "GNU assembler"
13808 GNU assembler 2.15.94 mipssde-6.02.02-20050602
13809 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
13811 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
13815 $ mips-linux-as --version |grep "GNU assembler"
13816 GNU assembler (GNU Binutils) 2.18
13817 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
13819 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
13823 As a result of above, you'll see many noises with such binutils:
13826 /bin/sh: line 0: [: : integer expression expected
13827 /bin/sh: line 0: [: : integer expression expected
13828 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
13829 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
13830 /bin/sh: line 0: [: : integer expression expected
13831 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
13832 /bin/sh: line 0: [: : integer expression expected
13833 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
13834 /bin/sh: line 0: [: : integer expression expected
13836 This patch simplifies the trick and makes it work with both versions of gas.
13837 I also replace an expensive `awk (or gawk)' with `cut'.
13839 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13841 commit 16664f72850846e645616da1c0fa5afcd6d15f15
13842 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13843 Date: Sat Nov 17 20:05:26 2007 +0900
13845 [MIPS] Remove useless instructions for initializing $gp.
13847 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13849 commit 03c031d5660ea946c39af6e2e16267da857c609f
13850 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13851 Date: Sat Oct 27 15:27:06 2007 +0900
13853 [MIPS] MIPS 4K core: Coding style cleanups
13855 No logical changes.
13857 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13859 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
13860 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13861 Date: Sat Nov 17 20:05:20 2007 +0900
13863 [MIPS] gth2.c: Fix a warning on gth2 build.
13865 gth2.c: In function 'misc_init_r':
13866 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
13868 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13870 commit 4fbd0741b2b6441da10be93e10267122581b7079
13871 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13872 Date: Sat Oct 27 15:22:33 2007 +0900
13874 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
13876 au1x00_eth.c: In function 'au1x00_miiphy_write':
13877 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
13879 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13881 commit f01320459736f156707425cf8112f98606301aa4
13882 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13883 Date: Sat Oct 27 15:00:25 2007 +0900
13885 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
13887 au1x00_eth.c: In function 'au1x00_enet_initialize':
13888 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
13889 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
13890 au1x00_eth.c:246: error: for each function it appears in.)
13891 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
13892 au1x00_eth.c: In function 'au1x00_miiphy_write':
13893 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
13894 make[1]: *** [au1x00_eth.o] Error 1
13896 Fixed by moving these two functions forward.
13898 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13900 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
13901 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13902 Date: Sat Oct 27 15:00:25 2007 +0900
13904 MAKEALL: Added missing pb1000 board
13906 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13908 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
13909 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13910 Date: Sat Oct 27 15:00:24 2007 +0900
13912 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
13914 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13916 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
13917 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13918 Date: Sat Oct 27 15:00:24 2007 +0900
13920 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
13922 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13924 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
13925 Author: Wolfgang Denk <wd@denx.de>
13926 Date: Sat Nov 17 02:34:38 2007 +0100
13928 Update CHANGELOIG, prepare for -rc4
13930 Signed-off-by: Wolfgang Denk <wd@denx.de>
13932 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
13933 Author: Luotao Fu <l.fu@pengutronix.de>
13934 Date: Wed Nov 14 18:58:33 2007 +0100
13936 Fix the i2c frequency and default address in rsdproto board
13938 rsdproto board support has wrong I2C frequency and wrong return value
13941 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
13943 commit 429c180edad038f91c989cb14b478228092e7054
13944 Author: Wolfgang Denk <wd@denx.de>
13945 Date: Sat Nov 17 01:45:38 2007 +0100
13947 powerpc: Backout relocation changes for MPC5121, too.
13949 Apply Grant Likely's backout to MPC5121 code, too.
13951 Pointed out by Rafal Jaworowski <raj@semihalf.com>
13953 Signed-off-by: Wolfgang Denk <wd@denx.de>
13955 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
13956 Author: Grant Likely <grant.likely@secretlab.ca>
13957 Date: Tue Nov 13 22:18:33 2007 -0700
13959 powerpc: Backout relocation changes.
13961 Ugh. I *hate* to back this change out, but these compiler flags don't
13962 work for relocation on all versions of GCC. I've not been able to
13963 reproduce the environment in my setup (and hence, not been able to
13964 find a combination that *does* work), so I've got no choice but to go
13965 back to the old gcc flags and linker script.
13967 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
13969 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
13970 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13971 Date: Tue Nov 13 09:11:05 2007 +0100
13973 Fixed mips_io_port_base build errors.
13975 This patch has been sent on:
13978 Although mips_io_port_base is currently a part of IDE command, it is quite
13979 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
13980 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
13982 This patch is triggered by multiple definition of `mips_io_port_base' build
13983 error on gth2 (and tb0229 also needs this fix.)
13985 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
13986 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
13987 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
13988 make: *** [u-boot] Error 1
13990 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13991 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13993 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
13994 Author: Wolfgang Denk <wd@denx.de>
13995 Date: Sat Nov 17 01:30:40 2007 +0100
13997 Fix a bug in the slave serial programming mode for the Xilinx
13998 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
13999 the most significant bit was set, which did not work on any
14000 architecture where "char" defaulted to be an unsigned type.
14002 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
14004 Signed-off-by: Wolfgang Denk <wd@denx.de>
14006 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
14007 Author: Jon Loeliger <jdl@freescale.com>
14008 Date: Thu Nov 1 12:23:29 2007 -0500
14010 86xx: Fix broken variable reference when #def DEBUGing.
14012 Sometimes you can't reference the DDR2 controller variables.
14014 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14016 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
14017 Author: Jason Jin <Jason.jin@freescale.com>
14018 Date: Fri Oct 26 18:32:00 2007 +0800
14020 make 8610 board use pixis reset
14022 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14024 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
14025 Author: Jason Jin <Jason.jin@freescale.com>
14026 Date: Mon Oct 29 19:26:21 2007 +0800
14028 Unify pixis_reset altbank across board families
14030 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
14031 into the separate board config files.
14033 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14034 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14036 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
14037 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14038 Date: Wed Nov 7 08:19:21 2007 +0100
14040 Fix warning: pointer targets in assignment differ in signedness
14042 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14044 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
14045 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14046 Date: Wed Nov 7 08:19:19 2007 +0100
14048 Fix warning differ in signedness in common/cmd_ide.c
14050 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14052 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
14053 Author: Stefan Roese <sr@denx.de>
14054 Date: Fri Nov 16 14:16:54 2007 +0100
14056 ppc4xx: Enable 405EX PCIe UTL register configuration
14058 Till now the UTL registers on 405EX were not initialized but left with
14059 their default values. This patch new initializes some of the UTL
14060 registers on 405EX.
14062 Signed-off-by: Stefan Roese <sr@denx.de>
14064 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
14065 Author: Stefan Roese <sr@denx.de>
14066 Date: Fri Nov 16 14:00:59 2007 +0100
14068 ppc4xx: Update AMCC Makalu for board rev 1.1
14070 This patch adds changes needed for Makalu rev 1.1:
14072 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
14073 - Enable 2nd ethernet port EMAC1
14074 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
14075 - Reset PCIe ports via GPIO upon bootup
14077 Signed-off-by: Stefan Roese <sr@denx.de>
14079 commit 4d4faae65e115e327425cd514c1a35146a85166b
14080 Author: Grant Likely <grant.likely@secretlab.ca>
14081 Date: Mon Sep 24 09:05:31 2007 -0600
14083 Group PCI and PCMCIA drivers in drivers/Makefile
14085 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14087 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
14088 Author: Grant Likely <grant.likely@secretlab.ca>
14089 Date: Mon Sep 24 09:05:31 2007 -0600
14091 Group block/flash drivers in drivers/Makefile
14093 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14095 commit df58c81551700f058b44cacf55a7997fa63bfe0a
14096 Author: Grant Likely <grant.likely@secretlab.ca>
14097 Date: Mon Sep 24 09:05:31 2007 -0600
14099 Group USB drivers in drivers/Makefile
14101 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14103 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
14104 Author: Grant Likely <grant.likely@secretlab.ca>
14105 Date: Mon Sep 24 09:05:30 2007 -0600
14107 Group i2c drivers in drivers/Makefile
14109 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14111 commit ec00c76de0e5971273905998d62d6bb119324218
14112 Author: Grant Likely <grant.likely@secretlab.ca>
14113 Date: Mon Sep 24 09:05:30 2007 -0600
14115 Group console drivers in drivers/Makefile
14117 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14119 commit 754f230aa01b8c789fc31f8013c2487954073300
14120 Author: Grant Likely <grant.likely@secretlab.ca>
14121 Date: Mon Sep 24 09:05:30 2007 -0600
14123 Group network drivers in drivers/Makefile
14125 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14127 commit f0037c56b0d12cd46215124667b9f83d60ef9391
14128 Author: Grant Likely <grant.likely@secretlab.ca>
14129 Date: Mon Sep 24 09:05:30 2007 -0600
14131 Build: split COBJS value into multiple lines
14133 This change is in preparation for condtitionial compile support in the
14134 build system. By spliting them all into seperate lines now, subsequent
14135 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
14136 be less invasive and easier to review
14138 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14140 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
14141 Author: Grant Likely <grant.likely@secretlab.ca>
14142 Date: Mon Sep 24 09:05:30 2007 -0600
14144 Add .gitignore files
14146 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14147 Acked-by: Kim Phillips <kim.phillips@freescale.com>
14149 commit 955413f35f054a82e40042f1dbcf501c6a05719b
14150 Author: Grant Likely <grant.likely@secretlab.ca>
14151 Date: Thu Nov 15 08:27:52 2007 -0700
14153 Revert "Correct relocation fixup for mpc5xx"
14155 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
14156 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14158 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
14159 Author: Grant Likely <grant.likely@secretlab.ca>
14160 Date: Thu Nov 15 08:24:32 2007 -0700
14162 Revert "Correct fixup relocation for MPC5xxx"
14164 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
14165 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14167 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
14168 Author: Grant Likely <grant.likely@secretlab.ca>
14169 Date: Thu Nov 15 08:21:04 2007 -0700
14171 Revert "Correct fixup relocation for mpc8220"
14173 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
14174 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14176 commit 70922342369e5e39b286fe21e768a239ca07a514
14177 Author: Grant Likely <grant.likely@secretlab.ca>
14178 Date: Thu Nov 15 08:20:57 2007 -0700
14180 Revert "Correct fixup relocation for mpc824x"
14182 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
14183 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14185 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
14186 Author: Grant Likely <grant.likely@secretlab.ca>
14187 Date: Thu Nov 15 08:20:50 2007 -0700
14189 Revert "Correct fixup relocation for mpc8260"
14191 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
14192 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14194 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
14195 Author: Grant Likely <grant.likely@secretlab.ca>
14196 Date: Thu Nov 15 08:20:43 2007 -0700
14198 Revert "Correct fixup relocation for mpc83xx"
14200 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
14201 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14203 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
14204 Author: Grant Likely <grant.likely@secretlab.ca>
14205 Date: Thu Nov 15 08:20:25 2007 -0700
14207 Revert "[MPC512x] Correct fixup relocation"
14209 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
14210 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
14212 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
14213 Author: Stefan Roese <sr@denx.de>
14214 Date: Thu Nov 15 14:25:09 2007 +0100
14216 ppc4xx: Small AMCC Kilauea cleanup
14218 Remove not needed pci_target_init() function.
14220 Signed-off-by: Stefan Roese <sr@denx.de>
14222 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
14223 Author: Stefan Roese <sr@denx.de>
14224 Date: Thu Nov 15 14:23:55 2007 +0100
14226 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
14228 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
14229 - Cleanup of the 4xx GPIO functions
14230 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
14232 Signed-off-by: Stefan Roese <sr@denx.de>
14234 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
14235 Author: Stefan Roese <sr@denx.de>
14236 Date: Thu Nov 15 14:20:08 2007 +0100
14238 ppc4xx: AMCC Taihu board config file cleanup
14240 This patch makes the AMCC Taihu a little more compatible to the other
14243 Signed-off-by: Stefan Roese <sr@denx.de>
14245 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
14246 Author: Marian Balakowicz <m8@semihalf.com>
14247 Date: Thu Nov 15 13:37:28 2007 +0100
14249 [INKA4x0] NG hardware: flash support
14251 Disabled and remove inka4x0 custom flash driver, use CFI flash
14254 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
14256 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
14257 Author: Marian Balakowicz <m8@semihalf.com>
14258 Date: Thu Nov 15 13:29:55 2007 +0100
14260 [INKA4x0] NG hardware: SDRAM support
14262 Add support for three new DDR chips that may be present on a NG
14263 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
14265 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
14267 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
14269 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
14270 Author: Marian Balakowicz <m8@semihalf.com>
14271 Date: Thu Nov 15 13:24:43 2007 +0100
14273 [INKA4x0] NG hardware: platform code update
14275 - Cleanup compile warnings.
14276 - Add missing '\0' in default environment.
14277 - Increase CFG_MONITOR_LEN to 256 KiB.
14278 - Add required CFG_USE_PPCENV.
14280 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
14282 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
14283 Author: Peter Pearse <peter.pearse@arm.com>
14284 Date: Thu Nov 15 08:58:00 2007 +0000
14286 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
14287 Remove warnings re onenand_read() & write()
14289 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
14290 Author: Peter Pearse <peter.pearse@arm.com>
14291 Date: Thu Nov 15 08:45:13 2007 +0000
14295 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
14296 Author: Roy Zang <tie-fei.zang@freescale.com>
14297 Date: Thu Sep 13 18:52:28 2007 +0800
14299 Enable ULi1575 Ethernet support in 8610HPCD config
14301 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
14302 Acked-by: Jon Loeliger <jdl@freescale.com>
14304 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
14305 Author: Stefan Roese <sr@denx.de>
14306 Date: Tue Nov 13 08:18:20 2007 +0100
14308 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
14310 Signed-off-by: Stefan Roese <sr@denx.de>
14312 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
14313 Author: Stefan Roese <sr@denx.de>
14314 Date: Tue Nov 13 08:06:11 2007 +0100
14316 ppc4xx: Fix 405EX PCIe UTLSET register setup
14318 Signed-off-by: Stefan Roese <sr@denx.de>
14320 commit 1ce55151c85d068f70317a8d65c61058b891afb4
14321 Author: Heiko Schocher <hs@denx.de>
14322 Date: Tue Nov 13 07:50:29 2007 +0100
14324 [UC101] SRAM now with 2 MB working.
14326 Signed-off-by: Heiko Schocher <hs@denx.de>
14328 commit 2d14684341109a69616e4d6016cd61402d55086f
14329 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14330 Date: Fri Nov 9 15:37:53 2007 +0100
14332 ppc4xx: Use generic usb-ohci driver for sequoia board
14334 This patch makes the sequoia board use the generic usb-ohci driver
14335 instead of cpu/ppc4xx/usb_ohci.c.
14337 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14338 Signed-off-by: Stefan Roese <sr@denx.de>
14340 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
14341 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14342 Date: Fri Nov 9 15:37:23 2007 +0100
14344 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
14346 This patch disables the 44x d-cache on 'usb start' and
14347 reenables it on 'usb stop'. This should be seen as a
14348 temporary fix until the generic usb-ohci driver can
14349 life with d-cache enabled.
14351 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14352 Signed-off-by: Stefan Roese <sr@denx.de>
14354 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
14355 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14356 Date: Fri Nov 9 15:36:44 2007 +0100
14358 ppc4xx: Remove redundant code from 4xx network driver
14360 This patch removes some redundant code and decrements the end
14361 address of cache flush and invalidate by 1.
14363 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14364 Signed-off-by: Stefan Roese <sr@denx.de>
14366 commit 5ca9881aad8c413ac2a82868a5e3719178254502
14367 Author: Peter Pearse <peter.pearse@arm.com>
14368 Date: Fri Nov 9 15:24:26 2007 +0000
14370 Add apollon board support
14371 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
14373 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
14374 Author: Stefan Roese <sr@denx.de>
14375 Date: Fri Nov 9 12:19:58 2007 +0100
14377 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
14379 Signed-off-by: Stefan Roese <sr@denx.de>
14381 commit c7f69c340277935a6c19a956421852da944a365f
14382 Author: Stefan Roese <sr@denx.de>
14383 Date: Fri Nov 9 12:18:54 2007 +0100
14385 ppc4xx: Make output a little shorter on I2C bootrom detection
14387 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
14388 already print a line with the information which I2C bootrom is
14389 used for bootstrap configuration. So we don't need this extra line
14390 with "I2C boot EEPROM en-/dis-abled".
14392 This patch also has a little code cleanup integrated.
14394 Signed-off-by: Stefan Roese <sr@denx.de>
14396 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
14397 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14398 Date: Thu Nov 8 12:50:18 2007 -0600
14400 ColdFire: MCF5329 - Remove reset registers from CCM
14402 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14404 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
14405 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14406 Date: Thu Nov 8 12:31:11 2007 -0600
14408 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
14410 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14412 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
14413 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14414 Date: Thu Nov 8 12:19:01 2007 -0600
14416 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
14418 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14420 commit 225a24b5e062ad94627424508ae814f51dbe1a34
14421 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14422 Date: Wed Nov 7 18:00:54 2007 -0600
14424 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
14426 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14428 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
14429 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14430 Date: Wed Nov 7 17:56:15 2007 -0600
14432 ColdFire: MCF532x - Update do_reset() using core reset
14434 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14436 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
14437 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14438 Date: Wed Nov 7 17:51:00 2007 -0600
14440 ColdFire: Update cpu flag for 4.2-xx compiler
14442 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14444 commit 070ba56115b4da63b46e974287fa4550d4023386
14445 Author: York Sun <yorksun@freescale.com>
14446 Date: Wed Oct 31 14:59:04 2007 -0500
14448 8610: Add console frame buffer support to FSL 8610 DIU driver.
14450 Add cfb console support to FSL 8610 DIU driver.
14451 Inspect board version from PIXIS to obtain correct pixel format.
14453 Use #define CONFIG_VIDEO in config file to enable fb console.
14455 To switch monitor, set monitor variable to
14456 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
14457 followed by "diufb init".
14459 Preserve logo bitmap at the top of the fb console.
14461 Signed-off-by: York Sun <yorksun@freescale.com>
14462 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14464 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
14465 Author: York Sun <yorksun@freescale.com>
14466 Date: Mon Oct 29 13:58:39 2007 -0500
14468 8610: Add 8610 DIU display driver
14470 1280x1024 and 1024x768 @ 32 bpp are supported now.
14471 DVI, Single-link LVDS, Double-link LVDS are all supported.
14473 Environmental variable "monitor" is used to specify monitor port.
14475 A new command "diufb" is introduced to reinitialize monitor
14476 and display a BMP file in the memory. So far, 1-bit, 4-bit,
14477 8-bit and 24-bit BMP formats are supported.
14480 - initialize the diu driver
14481 Enable the port specified in the environmental variable "monitor"
14484 - display bmp file in memory.
14485 The bmp image should be no bigger than the resolution, 1280x1024
14486 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
14488 Note, this driver allocate memory but doesn't free it after use
14489 It is written on purpose -- to avoid a failure of reallocation
14490 due to memory fragement.
14492 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
14494 Signed-off-by: York Sun <yorksun@freescale.com>
14495 Signed-off-by: Jon loeliger <jdl@freescale.com>
14497 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
14498 Author: York Sun <yorksun@freescale.com>
14499 Date: Wed Oct 31 10:43:59 2007 -0500
14501 FSL: Add a freescale bitmap logo.
14503 This Freescale logo is a 340 x 128 x 4bpp BMP file
14504 that can be displayed by the DIU Framebuffer driver.
14506 Signed-off-by: York Sun <yorksun@freescale.com>
14507 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14509 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
14510 Author: York Sun <yorksun@freescale.com>
14511 Date: Mon Oct 29 13:57:53 2007 -0500
14513 8610: Make some extra debug environment variables conditional.
14515 One may #define ENV_DEBUG to get them back again.
14517 Signed-off-by: York Sun <yorksun@freescale.com>
14519 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
14520 Author: Jason Jin <Jason.jin@freescale.com>
14521 Date: Mon Oct 29 19:26:21 2007 +0800
14523 8610: Actually enable pixis_reset CONFIGs
14525 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14527 commit f3bceaab230b4748d0afc4109b6837308f018b40
14528 Author: Jason Jin <Jason.jin@freescale.com>
14529 Date: Fri Oct 26 18:31:59 2007 +0800
14531 Fix the BAT definition of PCI IO on 8610 board
14533 The address in the BAT register is aligned with the BAT size.
14534 The original definition actually did not define BAT for PCIE2 IO.
14535 This patch fix this.
14537 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14539 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
14540 Author: Jason Jin <Jason.jin@freescale.com>
14541 Date: Mon Oct 29 19:26:21 2007 +0800
14543 Unify pixis_reset altbank across board families
14545 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
14546 into the separate board config files.
14548 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14549 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14551 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
14552 Author: Jason Jin <Jason.jin@freescale.com>
14553 Date: Fri Oct 26 18:32:00 2007 +0800
14555 make 8610 board use pixis reset
14557 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
14559 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
14560 Author: Jon Loeliger <jdl@freescale.com>
14561 Date: Thu Nov 1 12:23:29 2007 -0500
14563 86xx: Fix broken variable reference when #def DEBUGing.
14565 Sometimes you can't reference the DDR2 controller variables.
14567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14569 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
14570 Author: Roy Zang <tie-fei.zang@freescale.com>
14571 Date: Mon Nov 5 17:39:24 2007 +0800
14573 Implement general ULi 526x Ethernet driver support in U-boot
14575 This patch implements general ULi 526x Ethernet driver.
14576 Until now, it is the only native Ethernet port on
14577 MPC8610HPCD board, but it could be used on other boards
14578 with ULi 526x Ethernet port as well.
14580 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
14581 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
14582 Acked-by: Jon Loeliger <jdl@freescale.com>
14583 Signed-off-by: Ben Warren <bwarren@qstreams.com>
14585 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
14586 Author: Larry Johnson <lrj@arlinx.com>
14587 Date: Thu Nov 1 08:46:50 2007 -0500
14589 NET: Add Ethernet 1000BASE-X support for PPC4xx
14591 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
14592 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
14593 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
14594 "mii info" command is modified to distinguish between 1000BASE-T and -X.
14596 Signed-off-by: Larry Johnson <lrj@acm.org>
14597 Signed-off-by: Ben Warren <bwarren@qstreams.com>
14599 commit 298035df4948b113d29ac0e694717d34b95bc5dc
14600 Author: Larry Johnson <lrj@arlinx.com>
14601 Date: Wed Oct 31 11:21:29 2007 -0500
14603 NET: Cosmetic changes
14605 Signed-off-by: Larry Johnson <lrj@acm.org>
14606 Signed-off-by: Ben Warren <bwarren@qstreams.com>
14608 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
14609 Author: Stefan Roese <sr@denx.de>
14610 Date: Mon Nov 5 07:43:05 2007 +0100
14612 ppc4xx: Make output a little shorter on PCIe detection
14614 Now not max 3 lines but 2 lines are printed per PCIe port.
14616 Signed-off-by: Stefan Roese <sr@denx.de>
14618 commit 992742a5b09d9040adbd156fb90756af66ade310
14619 Author: Wolfgang Denk <wd@denx.de>
14620 Date: Sat Nov 3 23:09:27 2007 +0100
14622 Cleanup coding style; update CHANGELOG
14624 Signed-off-by: Wolfgang Denk <wd@denx.de>
14626 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
14627 Author: Bruce Adler <bruce.adler@ccpu.com>
14628 Date: Fri Nov 2 13:15:42 2007 -0700
14630 fix wording in README
14632 Changed the wording to properly describe the shadowing
14633 of the environment from ROM to RAM
14635 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
14637 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
14638 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14639 Date: Wed Oct 31 02:18:15 2007 +0900
14641 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
14643 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14645 commit ec22755799466c8a103664bb3a5e647bf9c238f4
14646 Author: Vlad Lungu <vlad@comsys.ro>
14647 Date: Thu Oct 25 16:08:14 2007 +0300
14649 Trimmed some variables in ne2000.c
14651 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
14653 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
14654 Author: Zhang Wei <wei.zhang@freescale.com>
14655 Date: Thu Oct 25 17:51:27 2007 +0800
14657 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
14659 The scan code of the key 'z' is 0x1d, which should be handled.
14661 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
14664 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
14666 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
14667 Author: Zhang Wei <wei.zhang@freescale.com>
14668 Date: Thu Oct 25 17:30:04 2007 +0800
14670 Fix USB support issue for MPC8641HPCN board.
14672 The configuration file has already enabled USB, but it
14673 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
14674 on MPC8641HPCN can not work because of the wrong USB
14677 And add the USB command to U-Boot commands list.
14679 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
14681 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
14682 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14683 Date: Wed Oct 24 18:16:01 2007 +0200
14685 Use config_cmd_default.h instead of config_cmd_all.h
14687 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14689 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
14690 Author: Marian Balakowicz <m8@semihalf.com>
14691 Date: Wed Oct 24 01:37:36 2007 +0200
14693 TQM5200: Call usb_cpu_init() during board init
14695 usb_cpu_init() configures GPS USB pins, clocks, etc. and
14696 is required for proper operation of kernel USB subsystem.
14697 This setup was previously done in the kernel by the fixup
14698 code which is being removed, thus low level init must be
14699 done by U-boot now.
14701 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
14703 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
14704 Author: Guennadi Liakhovetski <lg@denx.de>
14705 Date: Tue Oct 23 16:25:50 2007 +0200
14709 An obvious typo. Originally fixed in linkstation u-boot port.
14711 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14713 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
14714 Author: Guennadi Liakhovetski <lg@denx.de>
14715 Date: Tue Oct 23 14:35:05 2007 +0200
14717 Fix a typo in cpu/mpc824x/interrupts.c
14719 Since December 2003 the timer_interrupt_cpu() function in
14720 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
14721 parameter. Remove it.
14723 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14725 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
14726 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
14727 Date: Wed Oct 17 11:13:51 2007 +0200
14729 add ft_cpu_setup(..) on mpc8260
14731 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
14732 based on code from mpc5xxx
14734 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
14737 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
14738 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
14739 Date: Wed Oct 17 11:18:42 2007 +0200
14741 changes for IDS8247 board support
14743 To get the IDS8247 board working following are done:
14744 - FCC2 is deactivated
14745 - FCC1 is activated
14747 - CFI driver is activated
14748 - Adapted for use with LIBFDT
14750 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
14753 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
14754 Author: Stefan Roese <sr@denx.de>
14755 Date: Sat Nov 3 12:08:28 2007 +0100
14757 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
14759 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
14760 Again, only one image supports both targets.
14762 Signed-off-by: Stefan Roese <sr@denx.de>
14764 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
14765 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
14766 Date: Wed Oct 24 15:48:37 2007 +0200
14768 ATSTK1002: Remove default ethernet addresses
14770 Wolfgang is right: It's not a good idea to set up default initial
14771 ethernet addresses for a board, even though they belong to the local
14774 This will change the failure mode from "IT manager screams at you for
14775 using duplicate ethernet addresses" to a nice error message explaining
14776 that the ethernet address hasn't been set properly.
14778 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
14780 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
14781 Author: Justin Flammia <jflammia@savantav.com>
14782 Date: Mon Oct 29 17:40:35 2007 -0400
14786 This is a multi-part message in MIME format.
14788 commit e6e505eae94ed721e123e177489291fc4544b7b8
14789 Author: Justin Flammia <jflammia@savantav.com>
14790 Date: Mon Oct 29 17:19:03 2007 -0400
14792 Found a bug in the way the DHCP Request packet is built, where the IP address
14793 that is offered by the server is bound to prematurely. This patch is a fix of
14794 that bug where the IP address offered by the DHCP server is not used until
14795 after the DHCP ACK from the server is received.
14797 Signed-off-by: Justin Flammia <jflammia@savantav.com>
14798 Signed-off-by: Ben Warren <bwarren@qstreams.com>
14800 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
14801 Author: Stefan Roese <sr@denx.de>
14802 Date: Wed Oct 31 20:58:34 2007 +0100
14804 ppc4xx: Fix acadia_nand build problem
14806 Since the cache handling functions were moved from start.S into cache.S
14807 the acadia NAND booting Makfile needs to be adapted accordingly.
14809 Signed-off-by: Stefan Roese <sr@denx.de>
14811 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
14812 Author: Stefan Roese <sr@denx.de>
14813 Date: Wed Oct 31 20:57:11 2007 +0100
14815 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
14817 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
14818 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
14819 boards by defining CONFIG_4xx_DCACHE in the board config file. This
14820 option will disappear, when more boards use is successfully and no
14821 more known problems exist.
14823 This is tested successfully on Sequoia and Katmai. The only problem that
14824 needs to be fixed is, that USB is not working on Sequoia right now, since
14825 it will need some cache handling code too, similar to the 4xx EMAC driver.
14827 Signed-off-by: Stefan Roese <sr@denx.de>
14829 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
14830 Author: Stefan Roese <sr@denx.de>
14831 Date: Wed Oct 31 20:51:10 2007 +0100
14833 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
14835 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
14836 disable the cache for the CPU POST tests, since these tests consist
14837 of self modifying code. This is done via the new change_tlb() function.
14839 Signed-off-by: Stefan Roese <sr@denx.de>
14841 commit f71b2888b4b3c870909a0341427b2a914246f81f
14842 Author: Stefan Roese <sr@denx.de>
14843 Date: Wed Oct 31 20:47:26 2007 +0100
14845 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
14847 This patch enables the 4xx EMAC POST driver to work too, when dcache is
14850 Signed-off-by: Stefan Roese <sr@denx.de>
14852 commit a2685904061b35a17583d65fe47cdc2686a69eaa
14853 Author: Stefan Roese <sr@denx.de>
14854 Date: Wed Oct 31 20:45:53 2007 +0100
14856 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
14858 Signed-off-by: Stefan Roese <sr@denx.de>
14860 commit ff768cb168d8157c24a25016dbfbeb465e47f420
14861 Author: Stefan Roese <sr@denx.de>
14862 Date: Wed Oct 31 18:01:24 2007 +0100
14864 ppc4xx: Change 4xx ethernet driver to handle cached memory too
14866 This patch enables the 4xx EMAC driver to work too, when dcache is
14869 Signed-off-by: Stefan Roese <sr@denx.de>
14871 commit 483e09a223c666269ef81d3573a6591b1046b0ef
14872 Author: Stefan Roese <sr@denx.de>
14873 Date: Wed Oct 31 17:59:22 2007 +0100
14875 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
14877 This function is used to either turn cache on or off in a specific
14880 Signed-off-by: Stefan Roese <sr@denx.de>
14882 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
14883 Author: Stefan Roese <sr@denx.de>
14884 Date: Wed Oct 31 17:57:52 2007 +0100
14886 ppc4xx: Remove cache definition from 4xx board config files
14888 All 4xx board config files don't need the cache definitions anymore.
14889 These are now defined in common headers.
14891 Signed-off-by: Stefan Roese <sr@denx.de>
14893 commit 9b94ac61d2176185c30adf0793e079ec30e68687
14894 Author: Stefan Roese <sr@denx.de>
14895 Date: Wed Oct 31 17:55:58 2007 +0100
14897 ppc4xx: Rework 4xx cache support
14899 New cache handling functions added and all existing functions
14900 moved from start.S into seperate cache.S.
14902 Signed-off-by: Stefan Roese <sr@denx.de>
14904 commit 06713773da4ac3d390c63d82641eb553224b27c2
14905 Author: Stefan Roese <sr@denx.de>
14906 Date: Tue Oct 23 18:03:12 2007 +0200
14908 ppc4xx: Remove compiler warning from previous commit
14910 Signed-off-by: Stefan Roese <sr@denx.de>
14912 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
14913 Author: Stefan Roese <sr@denx.de>
14914 Date: Tue Oct 23 14:40:30 2007 +0200
14916 ppc4xx: Remove temporary TLB entry in POST cache test
14918 Signed-off-by: Stefan Roese <sr@denx.de>
14920 commit 1338e6a81834099ba19733b69aafd8ef5f098094
14921 Author: Stefan Roese <sr@denx.de>
14922 Date: Tue Oct 23 14:05:08 2007 +0200
14924 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
14926 I lately noticed, that newer 4xx board with GBit support sometimes don't
14927 finish link autonegotiation in 4 seconds. Changing this timeout to 5
14928 seconds seems fine here.
14930 Signed-off-by: Stefan Roese <sr@denx.de>
14932 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
14933 Author: Stefan Roese <sr@denx.de>
14934 Date: Tue Oct 23 14:03:17 2007 +0200
14936 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
14938 This patch changes all in32/out32 calls to use the recommended in_be32/
14939 out_be32 macros instead.
14941 Signed-off-by: Stefan Roese <sr@denx.de>
14943 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
14944 Author: Stefan Roese <sr@denx.de>
14945 Date: Thu Oct 25 12:24:59 2007 +0200
14947 ppc4xx: Fix POST ethernet test for Haleakala
14949 The POST ethernet test needed to be changed to dynamically determine
14950 the count of ethernet devices. This code is cloned from the 4xx
14953 Signed-off-by: Stefan Roese <sr@denx.de>
14955 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
14956 Author: Stefan Roese <sr@denx.de>
14957 Date: Tue Oct 23 11:31:05 2007 +0200
14959 ppc4xx: Correct UART input clock calculation and passing to fdt
14961 We now use a value in the gd (global data) structure for the UART input
14962 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
14965 Signed-off-by: Stefan Roese <sr@denx.de>
14967 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
14968 Author: Stefan Roese <sr@denx.de>
14969 Date: Tue Oct 23 10:10:08 2007 +0200
14971 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
14973 The Haleakala is nearly identical with the Kilauea eval board. The only
14974 difference is that the 405EXr only supports one EMAC and one PCIe
14975 interface. This patch adds support for the Haleakala board by using
14976 the identical image for Kilauea and Haleakala. The distinction is done
14977 by comparing the PVR.
14979 Signed-off-by: Stefan Roese <sr@denx.de>
14981 commit 9f798766aa85e62eb8fa8c721e148df609b78137
14982 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
14983 Date: Tue Oct 23 08:29:10 2007 +0200
14985 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
14987 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
14990 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
14991 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
14992 modules are still plugged in. So it is recommended to remove the DIMM
14993 modules while using the NAND booting code with the fixed SDRAM setup!
14995 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
14996 Signed-off-by: Stefan Roese <sr@denx.de>
14998 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
14999 Author: Stefan Roese <sr@denx.de>
15000 Date: Mon Oct 22 16:24:44 2007 +0200
15002 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
15004 Signed-off-by: Stefan Roese <sr@denx.de>
15006 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
15007 Author: Stefan Roese <sr@denx.de>
15008 Date: Mon Oct 22 16:22:40 2007 +0200
15010 ppc4xx: Rework of 4xx serial driver (4)
15014 - Use in_8/out_8 macros instead of in8/out8
15015 - No need for UART_BASE marco anymore, now really handled via function
15017 - serial_init_common() introduced
15018 - Further coding style cleanup
15020 Signed-off-by: Stefan Roese <sr@denx.de>
15022 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
15023 Author: Stefan Roese <sr@denx.de>
15024 Date: Mon Oct 22 15:45:49 2007 +0200
15026 ppc4xx: Rework of 4xx serial driver (3)
15028 Change all linker scripts to reference the changed driver name iop480_uart.o.
15030 Signed-off-by: Stefan Roese <sr@denx.de>
15032 commit 882ae41274921f9016131806bdeb27e19606f47a
15033 Author: Stefan Roese <sr@denx.de>
15034 Date: Mon Oct 22 15:44:39 2007 +0200
15036 ppc4xx: Rework of 4xx serial driver (2)
15038 Change all linker scripts to reference the changed driver name 4xx_uart.o.
15040 Note: In most cased all these explicit referencing of these object files
15041 in the linker scripts is not neccessary. Only for manually embedded
15042 environment into the U-Boot image, which is not done is most cases.
15044 Signed-off-by: Stefan Roese <sr@denx.de>
15046 commit ad31e40bed042cb670d0036fea96435007afb838
15047 Author: Stefan Roese <sr@denx.de>
15048 Date: Mon Oct 22 15:09:59 2007 +0200
15050 ppc4xx: Rework of 4xx serial driver (1)
15052 This patch starts the rework of the PPC4xx serial driver. First we split
15053 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
15054 handling code and the other one iop480_uart.c with the UART code for the
15055 PLX-Tech IOP480 PPC (PPC403 based).
15057 Signed-off-by: Stefan Roese <sr@denx.de>
15059 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
15060 Author: Stefan Roese <sr@denx.de>
15061 Date: Mon Oct 22 10:30:38 2007 +0200
15063 ppc4xx: Correct UART input clock calculation and passing to fdt
15065 Signed-off-by: Stefan Roese <sr@denx.de>
15067 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
15068 Author: Stefan Roese <sr@denx.de>
15069 Date: Mon Oct 22 07:34:34 2007 +0200
15071 ppc4xx: Add initial AMCC Makalu 405EX support
15073 Signed-off-by: Stefan Roese <sr@denx.de>
15075 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
15076 Author: Stefan Roese <sr@denx.de>
15077 Date: Mon Oct 22 07:33:52 2007 +0200
15079 ppc4xx: Add freqUART to CPU speed detection
15081 This value is needed later for the device tree configuration of
15084 Signed-off-by: Stefan Roese <sr@denx.de>
15086 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
15087 Author: Stefan Roese <sr@denx.de>
15088 Date: Sun Oct 21 14:26:29 2007 +0200
15090 ppc: Small Kilauea cleanup of config file
15092 Signed-off-by: Stefan Roese <sr@denx.de>
15094 commit 758c037aeead34b49631b8da3a90b1bba14c0410
15095 Author: Stefan Roese <sr@denx.de>
15096 Date: Sun Oct 21 08:16:12 2007 +0200
15098 rtc: Add Xicor/Intersil X1205 RTC support
15100 This patch adds support for the Xicor/Intersil X1205 RTC used on the
15101 AMCC Makalu eval board. This driver is basically cloned from the Linux
15102 driver version (2.6.23).
15104 This patch also introduces the Linux bcd.h header for the BCD2BIN/
15105 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
15106 should be converted to also use this header instead of implementing
15107 their own local copy of these functions/macros.
15109 Signed-off-by: Stefan Roese <sr@denx.de>
15111 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
15112 Author: Stefan Roese <sr@denx.de>
15113 Date: Sun Oct 21 08:12:41 2007 +0200
15115 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
15117 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
15118 PPC440_SYS_INFO structure into the common ppc4xx.h header.
15120 Lot's of other macros are good candidates to be consolidated this way
15123 Signed-off-by: Stefan Roese <sr@denx.de>
15125 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
15126 Author: Stefan Roese <sr@denx.de>
15127 Date: Sun Oct 21 08:05:18 2007 +0200
15129 ppc4xx: Fix size setup in Kilauea DDR2 init routine
15131 The size was initilized wrong. Instead of 256MB, the DDR2 controller
15132 was setup to 512MB. Now the correct values is used.
15134 This patch also does a little cleanup and adds a comment here.
15136 Signed-off-by: Stefan Roese <sr@denx.de>
15138 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
15139 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
15140 Date: Thu Oct 18 17:29:04 2007 +0200
15142 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
15144 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
15145 number is used to access system registers.
15147 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
15148 Signed-off-by: Stefan Roese <sr@denx.de>
15150 commit c36c68160333ac5fe41ec3db12a728b7075b3912
15151 Author: Stefan Roese <sr@denx.de>
15152 Date: Thu Oct 18 07:42:27 2007 +0200
15154 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
15156 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
15157 is the internal SRAM. Since I now ported and tested this endpoint mode
15158 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
15161 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
15164 Signed-off-by: Stefan Roese <sr@denx.de>
15166 commit 5cb4af4791f61843432155142b6cfac901f66c10
15167 Author: Stefan Roese <sr@denx.de>
15168 Date: Thu Oct 18 07:39:38 2007 +0200
15170 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
15172 This patch adds endpoint support for the AMCC Kilauea eval board. It can
15173 be tested by connecting a reworked PCIe cable (only 1x lane singles
15174 connected) to another root-complex.
15176 In this test setup, a 64MB inbound window is configured at BAR0 which maps
15177 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
15178 access the first 64MB of the SDRAM on the PPC side.
15180 Signed-off-by: Stefan Roese <sr@denx.de>
15182 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
15183 Author: Stefan Roese <sr@denx.de>
15184 Date: Sat Oct 13 16:43:23 2007 +0200
15186 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
15188 This patch adds support for dynamic configuration of PCIe ports for the
15189 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
15190 boards Yucca & Katmai and the 405EX board Kilauea.
15192 This dynamic configuration is done via the "pcie_mode" environement
15193 variable. This variable can be set to "EP" or "RP" for endpoint or
15194 rootpoint mode. Multiple values can be joined via the ":" delimiter.
15199 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
15202 Per default Yucca will be configured as:
15205 Per default Katmai will be configured as:
15206 pcie_mode=RP:RP:REP
15208 Per default Kilauea will be configured as:
15211 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
15212 Signed-off-by: Stefan Roese <sr@denx.de>
15214 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
15215 Author: Stefan Roese <sr@denx.de>
15216 Date: Thu Oct 11 11:15:59 2007 +0200
15218 ppc4xx: Enable device tree support (fdt) on Kilauea per default
15220 This patch enables the fdt support on the AMCC Kilauea eval board.
15221 Additionally now EBC ranges fdt fixup is included to support NOR
15222 FLASH mapping via the Linux physmap_of driver.
15224 This Kilauea port now support booting arch/ppc and arch/powerpc
15225 Linux kernels. The default environment "net_nfs" is for arch/ppc
15226 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
15227 support will be removed.
15229 Signed-off-by: Stefan Roese <sr@denx.de>
15231 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
15232 Author: Stefan Roese <sr@denx.de>
15233 Date: Thu Oct 11 11:11:45 2007 +0200
15235 ppc4xx: Add additional debug info to 4xx fdt support
15237 Signed-off-by: Stefan Roese <sr@denx.de>
15239 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
15240 Author: Stefan Roese <sr@denx.de>
15241 Date: Fri Oct 5 21:28:58 2007 +0200
15243 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
15245 Signed-off-by: Stefan Roese <sr@denx.de>
15247 commit 1941cce71b1ae975602854045061e82f94ecd012
15248 Author: Stefan Roese <sr@denx.de>
15249 Date: Fri Oct 5 17:35:10 2007 +0200
15251 ppc4xx: Fix small merge problem in 4xx_enet.c
15253 Signed-off-by: Stefan Roese <sr@denx.de>
15255 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
15256 Author: Stefan Roese <sr@denx.de>
15257 Date: Fri Oct 5 17:11:30 2007 +0200
15259 ppc4xx: Add initial AMCC Kilauea 405EX support
15261 Signed-off-by: Stefan Roese <sr@denx.de>
15263 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
15264 Author: Stefan Roese <sr@denx.de>
15265 Date: Fri Oct 5 17:10:59 2007 +0200
15267 ppc4xx: Add PPC405EX support
15269 Signed-off-by: Stefan Roese <sr@denx.de>
15271 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
15272 Author: Stefan Roese <sr@denx.de>
15273 Date: Fri Oct 5 17:09:36 2007 +0200
15275 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
15277 Signed-off-by: Stefan Roese <sr@denx.de>
15279 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
15280 Author: Stefan Roese <sr@denx.de>
15281 Date: Fri Oct 5 17:07:50 2007 +0200
15283 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
15285 Signed-off-by: Stefan Roese <sr@denx.de>
15287 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
15288 Author: Stefan Roese <sr@denx.de>
15289 Date: Fri Oct 5 17:04:57 2007 +0200
15291 POST: Add 405EX support to 4xx UART POST test
15293 Signed-off-by: Stefan Roese <sr@denx.de>
15295 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
15296 Author: Stefan Roese <sr@denx.de>
15297 Date: Fri Oct 5 15:10:02 2007 +0200
15299 DTT: Prepare DS1775 driver for use of different I2C addresses
15301 Signed-off-by: Stefan Roese <sr@denx.de>
15303 commit 19e93b1e16d267220440d827b920fbad8abfa70f
15304 Author: Stefan Roese <sr@denx.de>
15305 Date: Fri Oct 5 14:23:43 2007 +0200
15307 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
15309 Signed-off-by: Stefan Roese <sr@denx.de>
15311 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
15312 Author: Stefan Roese <sr@denx.de>
15313 Date: Fri Oct 5 09:22:33 2007 +0200
15315 ppc4xx: 4xx_pcie: Disable debug output as default
15317 Signed-off-by: Stefan Roese <sr@denx.de>
15319 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
15320 Author: Stefan Roese <sr@denx.de>
15321 Date: Fri Oct 5 09:18:23 2007 +0200
15323 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
15325 Signed-off-by: Stefan Roese <sr@denx.de>
15327 commit 4dbee8a90df613eb517aadbecebd70f168913d30
15328 Author: Stefan Roese <sr@denx.de>
15329 Date: Fri Oct 5 07:57:20 2007 +0200
15331 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
15333 128MB seems to be the smallest possible value for the memory size
15334 for on PCIe port. With this change now the BAR's of the PCIe cards
15335 are accessible under U-Boot.
15337 One big note: This only works for PCIe port 0 & 1. For port 2 this
15338 currently doesn't work, since the base address is now 0xc0000000
15339 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
15340 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
15341 to change the base addresses completely and this change would have
15342 too much impact right now.
15344 This patch adds debug output to the 4xx pcie driver too.
15346 Signed-off-by: Stefan Roese <sr@denx.de>
15348 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
15349 Author: Stefan Roese <sr@denx.de>
15350 Date: Wed Oct 3 21:16:32 2007 +0200
15352 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
15354 Signed-off-by: Stefan Roese <sr@denx.de>
15356 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
15357 Author: Stefan Roese <sr@denx.de>
15358 Date: Wed Oct 3 15:01:02 2007 +0200
15360 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
15362 These files were introduced with the IBM 405GP but are currently used on all
15363 4xx PPC platforms. So the name doesn't match the content anymore. This patch
15364 renames the files to 4xx_pci.c/h.
15366 Signed-off-by: Stefan Roese <sr@denx.de>
15368 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
15369 Author: Stefan Roese <sr@denx.de>
15370 Date: Wed Oct 3 14:14:58 2007 +0200
15372 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
15374 Signed-off-by: Stefan Roese <sr@denx.de>
15376 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
15377 Author: Stefan Roese <sr@denx.de>
15378 Date: Wed Oct 3 10:38:09 2007 +0200
15380 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
15382 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
15383 the SDR registers of the PCIe ports. This makes the overall design
15384 clearer, since it removed a lot of switch statements which are not
15387 Also, the functions ppc4xx_init_pcie_rootport() and
15388 ppc4xx_init_pcie_entport() are merged into a single function
15389 ppc4xx_init_pcie_port(), since most of the code was duplicated.
15390 This makes maintainance and porting to other 4xx platforms
15393 Signed-off-by: Stefan Roese <sr@denx.de>
15395 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
15396 Author: Stefan Roese <sr@denx.de>
15397 Date: Wed Oct 3 07:48:09 2007 +0200
15399 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
15401 This patch is the first patch of a series to make the 440SPe PCIe code
15402 usable on different 4xx PPC platforms. In preperation for the new 405EX
15403 which is also equipped with PCIe interfaces.
15405 (2) This patch renames the functions from 440spe_ to 4xx_ with a
15406 little additional cleanup
15408 Signed-off-by: Stefan Roese <sr@denx.de>
15410 commit c7c6da23028f146d912514b95aefa3da7cf37699
15411 Author: Stefan Roese <sr@denx.de>
15412 Date: Wed Oct 3 07:34:10 2007 +0200
15414 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
15416 This patch is the first patch of a series to make the 440SPe PCIe code
15417 usable on different 4xx PPC platforms. In preperation for the new 405EX
15418 which is also equipped with PCIe interfaces.
15420 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
15422 Signed-off-by: Stefan Roese <sr@denx.de>
15424 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
15425 Author: Marian Balakowicz <m8@semihalf.com>
15426 Date: Wed Oct 24 01:37:36 2007 +0200
15428 TQM5200: Call usb_cpu_init() during board init
15430 usb_cpu_init() configures GPS USB pins, clocks, etc. and
15431 is required for proper operation of kernel USB subsystem.
15432 This setup was previously done in the kernel by the fixup
15433 code which is being removed, thus low level init must be
15434 done by U-boot now.
15436 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
15437 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
15439 commit b5af773f8d92677e06f3295b45557c9d0a487c24
15440 Author: Zhang Wei <wei.zhang@freescale.com>
15441 Date: Thu Oct 25 17:51:27 2007 +0800
15443 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
15445 The scan code of the key 'z' is 0x1d, which should be handled.
15447 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
15450 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
15451 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
15453 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
15454 Author: Rodolfo Giometti <giometti@enneenne.com>
15455 Date: Mon Oct 15 11:59:17 2007 +0200
15457 PXA USB OHCI: "usb stop" implementation.
15459 Some USB keys need to be switched off before loading the kernel
15460 otherwise they can remain in an undefined status which prevents them
15461 to be correctly recognized by the kernel.
15463 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
15464 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
15466 commit 31548249decf18a6b877a18436b6139dd483fe4a
15467 Author: Justin Flammia <jflammia@savantav.com>
15468 Date: Mon Oct 29 17:40:35 2007 -0400
15472 This is a multi-part message in MIME format.
15474 commit e6e505eae94ed721e123e177489291fc4544b7b8
15475 Author: Justin Flammia <jflammia@savantav.com>
15476 Date: Mon Oct 29 17:19:03 2007 -0400
15478 Found a bug in the way the DHCP Request packet is built, where the IP address
15479 that is offered by the server is bound to prematurely. This patch is a fix of
15480 that bug where the IP address offered by the DHCP server is not used until
15481 after the DHCP ACK from the server is received.
15483 Signed-off-by: Justin Flammia <jflammia@savantav.com>
15484 Signed-off-by: Ben Warren <bwarren@qstreams.com>
15486 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
15487 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15488 Date: Thu Oct 25 17:16:22 2007 -0500
15490 ColdFire 54455: Fix correct boot location for atmel and intel
15492 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15494 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
15495 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15496 Date: Thu Oct 25 17:14:00 2007 -0500
15498 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
15500 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15502 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
15503 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15504 Date: Thu Oct 25 17:12:36 2007 -0500
15506 ColdFire 5329: Assign correct SDRAM size and fix cache
15508 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15510 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
15511 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15512 Date: Thu Oct 25 17:10:23 2007 -0500
15514 ColdFire 5253: Assign correct SDRAM size
15516 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15518 commit 2acefa72ee0026f862ab65597ca687428f63a973
15519 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15520 Date: Thu Oct 25 17:09:17 2007 -0500
15522 ColdFire 5282: Fix external flash boot and return dramsize
15524 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
15526 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
15527 Author: Bartlomiej Sieka <tur@semihalf.com>
15528 Date: Thu Oct 25 17:20:01 2007 +0200
15530 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
15532 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15534 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
15535 Author: Martin Krause <martin.krause@tqs.de>
15536 Date: Wed Oct 24 08:42:25 2007 +0200
15538 TQM5200: fix spurious characters on second serial interface
15540 With this patch PSC3 is configured as UART. This is done, because if
15541 the pins of PSC3 are not configured at all (-> all pins are GPI),
15542 due to crosstalk, spurious characters may be send over the RX232_2_TXD
15545 Signed-off-by: Martin Krause <martin.krause@tqs.de>
15546 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15548 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
15549 Author: Martin Krause <martin.krause@tqs.de>
15550 Date: Wed Oct 24 08:41:27 2007 +0200
15552 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
15554 Some commands for the STK52xx base board try to access the SM501 grafic
15555 controller. But the TQM5200S has no grafic controller (only the TQM5200
15556 and the TQM5200B have). This patch deactivates the commands accessing
15557 the SM501 for the TQM5200S.
15559 Signed-off-by: Martin Krause <martin.krause@tqs.de>
15560 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
15562 commit b31f64343ead9482cd439b1adbe4c34026a641b1
15563 Author: Martin Krause <martin.krause@tqs.de>
15564 Date: Mon Oct 22 16:45:53 2007 +0200
15566 TQM5200: fix spurious characters on second serial interface
15568 With this patch PSC3 is configured as UART. This is done, because if
15569 the pins of PSC3 are not configured at all (-> all pins are GPI),
15570 due to crosstalk, spurious characters may be send over the RX232_2_TXD
15573 Signed-off-by: Martin Krause <martin.krause@tqs.de>
15575 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
15576 Author: Martin Krause <martin.krause@tqs.de>
15577 Date: Mon Oct 22 16:40:06 2007 +0200
15579 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
15581 Some commands for the STK52xx base board try to access the SM501 grafic
15582 controller. But the TQM5200S has no grafic controller (only the TQM5200
15583 and the TQM5200B have). This patch deactivates the commands accessing
15584 the SM501 for the TQM5200S.
15586 Signed-off-by: Martin Krause <martin.krause@tqs.de>
15588 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
15589 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15590 Date: Sun Oct 21 09:14:28 2007 +0200
15592 Mips: Fix string functions differ prototype declaration
15594 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15596 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
15597 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15598 Date: Fri Oct 19 17:51:40 2007 -0500
15600 fsl_pci_init enable COMMAND_MEMORY if inbound window
15602 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
15603 to pciauto_setup_device has the side effect of not getting
15604 COMMAND_MEMORY set.
15606 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15608 commit e9d0d527992566ebef9826962ff1745b2f082b92
15609 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15610 Date: Fri Oct 19 10:55:24 2007 +0200
15612 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
15614 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15616 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
15617 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15618 Date: Fri Oct 19 08:10:15 2007 +0200
15620 fix warning: no return statement in function returning non-void
15622 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15624 commit e78220f6e514206757acfe247297fc9a328a881f
15625 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15626 Date: Fri Oct 19 06:33:45 2007 +0200
15628 xsengine: Fix no partition type specified, use DOS as default
15630 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15632 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
15633 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15634 Date: Fri Oct 19 00:24:59 2007 +0200
15636 lubbock: Fix no partition type specified, use DOS as default
15638 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15640 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
15641 Author: Wolfgang Denk <wd@denx.de>
15642 Date: Tue Oct 23 16:50:03 2007 +0200
15644 Coding style: keep lists sorted; update CHANGELOG
15646 Signed-off-by: Wolfgang Denk <wd@denx.de>
15648 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
15649 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15650 Date: Fri Oct 19 00:09:05 2007 +0200
15652 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
15654 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15656 commit 96455bfebc9887837095c9051d216f53c61b5f10
15657 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15658 Date: Fri Oct 19 00:07:39 2007 +0200
15660 Fix warning differ in signedness in board/innokom/innokom.c
15662 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15664 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
15665 Author: Marcel Ziswiler <marcel@ziswiler.com>
15666 Date: Fri Oct 19 00:25:33 2007 +0200
15668 fix pxa255_idp board
15670 The pxa255_idp being an old unmaintained board showed several issues:
15671 1. CONFIG_INIT_CRITICAL was still defined.
15672 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
15673 3. Symbol flash_addr was undeclared.
15674 4. The boards lowlevel_init function was still called memsetup.
15675 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
15676 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
15677 'target CPU does not support interworking' warnings on recent compilers.
15678 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
15679 indexes rather than the register definitions from the pxa-regs header
15680 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
15681 avoid any ambiguities.
15682 8. There were several redefinition warnings concerning ICMR, OSMR3,
15683 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
15684 9. The board configuration file was rather outdated.
15685 10. The part header file defined the vendor, product and revision arrays
15686 as unsigned chars instead of just chars in the block_dev_desc_t
15689 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
15691 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
15692 Author: Rune Torgersen <runet@innovsys.com>
15693 Date: Wed Oct 17 11:56:31 2007 -0500
15695 Make MPC8266ADS command selection more robust
15697 Fix MPC8266 command line definition so it won't break when new commands
15698 are added to u-boot.
15699 Signed-off-by Rune Torgersen <runet@innovsys.com>
15701 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
15702 Author: Bartlomiej Sieka <tur@semihalf.com>
15703 Date: Tue Oct 23 13:14:10 2007 +0200
15705 Motion-PRO: Update configuration to accomodate next generation board.
15707 New board has faster oscillator and a different Flash chip. This affects:
15708 - CFG_MPC5XXX_CLKIN
15710 - Flash CS configuration (timings)
15711 - Flash sector size, and thus MTD partition layout
15712 - malloc() arena size (due to bigger Flash sectors)
15713 - smaller memory test range (due to bigger malloc() arena)
15715 This patch also enables more extensive memory testing via "mtest".
15717 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15719 commit eff501904df2bf1724a750062628ba2c51dbb1f8
15720 Author: Bartlomiej Sieka <tur@semihalf.com>
15721 Date: Tue Oct 23 11:36:07 2007 +0200
15723 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
15725 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
15726 register must be written a value of 0x00000004 as the first step of the
15727 SDRAM contorller configuration.
15729 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15731 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
15732 Author: Peter Pearse <peter.pearse@arm.com>
15733 Date: Tue Oct 23 10:22:16 2007 +0100
15735 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
15737 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
15738 Author: Stefan Roese <sr@denx.de>
15739 Date: Tue Oct 23 10:17:42 2007 +0200
15741 ppc4xx: lwmon5: Some further GPIO config changes
15743 Signed-off-by: Stefan Roese <sr@denx.de>
15745 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
15746 Author: Vlad Lungu <vlad@comsys.ro>
15747 Date: Sun Oct 21 22:10:10 2007 +0900
15749 [MIPS] Fix UNCACHED_SDRAM
15751 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
15753 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
15754 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15756 commit 00101dd7a32d12f698150123e47e4b3420279f86
15757 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15758 Date: Sun Oct 21 21:30:42 2007 +0900
15760 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
15762 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15764 commit eb700636db017d310edaeb559b13d82588560674
15765 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15766 Date: Sun Oct 21 10:55:37 2007 +0900
15768 [MIPS] u-boot.lds: Define _gp in a standard manner
15770 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15772 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
15773 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15774 Date: Sun Oct 21 10:55:36 2007 +0900
15776 [MIPS] Fix $gp usage
15778 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
15779 As a general principle, we should use _gp for $gp.
15781 Thanks to linker script's help we fortunately have _gp which equals to
15782 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
15783 be able to access to GOT entires, global variables and procedure entry
15784 points. The right thing to do is to use _gp.
15786 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
15787 which holds the offset from _gp. When updating GOT entries, we use this
15788 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
15790 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
15791 I made some change to leave over num_got_entries.
15793 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15794 Cc: Vlad Lungu <vlad@comsys.ro>
15796 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
15797 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15798 Date: Sun Oct 21 10:55:36 2007 +0900
15800 [MIPS] u-boot.lds: Fix __got_start and __got_end
15802 Ensure that __got_start points to top of the `.got', and __got_end points
15803 to bottom as well, so that we never fail to count num_got_entries.
15805 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15807 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
15808 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15809 Date: Sun Oct 21 10:55:36 2007 +0900
15811 [MIPS] u-boot.lds: Remove duplicated .sdata section
15813 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15815 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
15816 Author: Wolfgang Denk <wd@denx.de>
15817 Date: Sun Oct 21 01:01:17 2007 +0200
15819 Minor coding style cleanup; update CHANGELOG
15821 Signed-off-by: Wolfgang Denk <wd@denx.de>
15823 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
15824 Author: Vlad Lungu <vlad@comsys.ro>
15825 Date: Thu Oct 4 20:47:10 2007 +0300
15829 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
15830 to do anything in eth_stop() if eth_init() was not called.
15831 Simplified RX path in order to avoid timeouts on really really
15832 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
15833 clever enough to cope with 1 packet per eth_rx().
15835 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
15837 commit df90968b48fb34fa9072fab150db2ac89678f537
15838 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
15839 Date: Mon Sep 24 13:32:13 2007 -0400
15841 Setting MSR[DE] in do_reset
15844 This patch ensures the soft reset of the board for the 85xx boards
15845 by setting the MSR[DE] in the do_reset function.
15847 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
15849 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
15850 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
15851 Date: Mon Sep 24 13:36:01 2007 -0400
15856 This patch fixes the MSR overwrite in the start.S when moving out of
15859 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
15861 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
15862 Author: Dan Wilson <dwilson@fulcrummicro.com>
15863 Date: Fri Oct 19 11:33:48 2007 -0500
15865 tsec driver should clear RHALT on startup
15867 This was causing problems for some people.
15869 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
15870 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
15871 Signed-off-by: Andy Fleming <afleming@freescale.com>
15873 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
15874 Author: Kumar Gala <galak@kernel.crashing.org>
15875 Date: Thu Oct 11 00:29:18 2007 -0500
15877 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
15879 On the MPC85xx CDS we have two issues:
15881 1. The device tree fixup code did not check to see if the property we are
15882 trying to update is actually found. Its possible that it would update
15883 random memory starting at 0.
15885 2. Newer Linux kernel's have moved the location of the PCI nodes to be
15886 sibilings of the soc node and not children. The explicit PATH to the PCI
15887 node would not be found for these device trees. Add the ability to handle
15888 both paths. In the future we shouldn't handle such fixups by explicit path.
15890 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15892 commit a3063eec775719b7e91023bbec3f64b3118791df
15893 Author: Kumar Gala <galak@kernel.crashing.org>
15894 Date: Thu Oct 11 00:18:48 2007 -0500
15896 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
15898 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
15899 console. Make it so we match that config what we tell Linux as the early
15902 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15904 commit e1ce3cb617bb06f91f82f98915391175addf3e82
15905 Author: Kumar Gala <galak@kernel.crashing.org>
15906 Date: Tue Oct 2 11:12:27 2007 -0500
15908 Remove magic numbers from cache related operations for mpc85xx
15910 The mpc85xx start code uses some magic numbers that we actually
15911 have #defines for in <config.h> so use those instead.
15913 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15915 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
15916 Author: Detlev Zundel <dzu@denx.de>
15917 Date: Fri Oct 19 16:47:26 2007 +0200
15921 Signed-off-by: Detlev Zundel <dzu@denx.de>
15923 commit 281df457c1aa50d2752165d0c5c3282d4027b974
15924 Author: Tony Li <tony.li@freescale.com>
15925 Date: Thu Oct 18 17:47:19 2007 +0800
15927 mpc83xx: Add configure entry for MPC83xx ATM support
15929 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
15930 Makfile and MAKEALL
15932 Signed-off-by: Tony Li <tony.li@freescale.com>
15933 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15935 commit d2646554f529a9577515eceb0ec5eceee18244ba
15936 Author: Tony Li <tony.li@freescale.com>
15937 Date: Thu Oct 18 17:44:38 2007 +0800
15939 mpc83xx: pq-mds-pib.c typo error
15941 Correct to val8 from val.
15943 Signed-off-by: Tony Li <tony.li@freescale.com>
15944 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15946 commit 3e11ae80fec1ee12194940955431186abf6009c2
15947 Author: Stefan Roese <sr@denx.de>
15948 Date: Wed Oct 17 15:40:19 2007 +0200
15950 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
15952 Signed-off-by: Stefan Roese <sr@denx.de>
15954 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
15955 Author: Jon Loeliger <jdl@freescale.com>
15956 Date: Tue Oct 16 15:27:43 2007 -0500
15958 Initial mpc8610hpcd Makefile files.
15960 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15961 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
15962 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15963 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15965 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
15966 Author: Jon Loeliger <jdl@freescale.com>
15967 Date: Tue Oct 16 15:26:51 2007 -0500
15969 Initial mpc8610hpcd cpu/, README and include/ files.
15971 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15972 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
15973 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15974 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15976 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
15977 Author: Jon Loeliger <jdl@freescale.com>
15978 Date: Tue Oct 16 13:54:01 2007 -0500
15980 Initial mpc8610hpcd board files.
15982 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15983 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
15984 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15985 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15987 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
15988 Author: runet@innovsys.com <runet@innovsys.com>
15989 Date: Tue Oct 16 14:50:40 2007 -0500
15991 Make MPC8266ADS board compile again.
15993 Signed-off-by: Runet Torgersen <runet@innovsys.com>
15995 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
15996 Author: Jon Loeliger <jdl@freescale.com>
15997 Date: Mon Aug 27 12:41:03 2007 -0500
15999 86xx: Allow for fewer DDR slots per memory controller.
16001 As a direct correlation exists between DDR DIMM slots
16002 and SPD EEPROM addresses used to configure them, use
16003 the individually defined SPD_EEPROM_ADDRESS* values to
16004 determine if a DDR DIMM slot should have its SPD
16005 configuration read or not.
16007 Effectively, this now allows for 1 or 2 DIMM slots
16008 per memory controller.
16010 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16012 commit 4d4a945e189a2f384c66432316da2788a0ac1607
16013 Author: Rodolfo Giometti <giometti@enneenne.com>
16014 Date: Mon Oct 15 11:59:17 2007 +0200
16016 PXA USB OHCI: "usb stop" implementation.
16018 Some USB keys need to be switched off before loading the kernel
16019 otherwise they can remain in an undefined status which prevents them
16020 to be correctly recognized by the kernel.
16022 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
16024 commit e2e93442e558cf1500e92861f99713b2f045ea22
16025 Author: Stefan Roese <sr@denx.de>
16026 Date: Mon Oct 15 11:39:00 2007 +0200
16028 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
16030 The I2C bootstrap values that can be setup via the "bootstrap" command,
16031 were setup incorrect regarding the generation of the internal sync PCI
16032 clock. The values for PLB clock == 133MHz were slighly incorrect and the
16033 values for PLB clock == 166MHz were totally incorrect. This could
16034 lead to a hangup upon booting while PCI configuration scan.
16036 This patch fixes this issue and configures valid PCI divisor values
16037 for the sync PCI clock, with respect to the provided external async
16040 Here the values of the formula in the chapter 14.2 "PCI clocking"
16041 from the 440EPx users manual:
16043 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
16045 33MHz async PCI frequency:
16047 => 32 <= 44.3 <= 65 (div = 3)
16050 => 32 <= 55.3 <= 65 (div = 3)
16052 66MHz async PCI frequency:
16054 => 65 <= 66.5 <= 132 (div = 2)
16057 => 65 <= 83 <= 132 (div = 2)
16059 Signed-off-by: Stefan Roese <sr@denx.de>
16061 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
16062 Author: Stefan Roese <sr@denx.de>
16063 Date: Mon Oct 15 11:29:33 2007 +0200
16065 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
16067 The BCSR status bit for the 66MHz PCI operation was correctly
16068 addressed (MSB/LSB problem). Now the correct currently setup
16069 PCI frequency is displayed upon bootup.
16071 This patch also fixes this problem on Rainier & Yellowstone, since these
16072 boards use the same souce code as Sequoia & Yosemite do.
16074 Signed-off-by: Stefan Roese <sr@denx.de>
16076 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
16077 Author: Martin Krause <martin.krause@tqs.de>
16078 Date: Wed Sep 26 17:55:56 2007 +0200
16080 TQM860M: adjust for doubled flash sector size.
16082 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
16083 doubled sector size.
16085 Signed-off-by: Martin Krause <martin.krause@tqs.de>
16087 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
16088 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
16089 Date: Wed Sep 26 17:55:54 2007 +0200
16091 TQM8xx: Fix CAN timing.
16093 Signed-off-by: Martin Krause <martin.krause@tqs.de>
16095 commit d43e489baf02afae49077791fb22332d240d8656
16096 Author: Martin Krause <martin.krause@tqs.de>
16097 Date: Thu Sep 27 14:54:36 2007 +0200
16099 TQM866M: fix SDRAM refresh
16101 At 133 MHz the current SDRAM refresh rate is too fast
16102 (measured 4 * 1.17 us).
16103 CFG_MAMR_PTA changes from 39 to 97. This result
16104 in a refresh rate of 4 * 7.8 us at the default clock
16105 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
16106 This is a compromise until a new method is found to
16107 adjust the refresh rate.
16109 Signed-off-by: Martin Krause <martin.krause@tqs.de>
16111 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
16112 Author: Martin Krause <martin.krause@tqs.de>
16113 Date: Wed Sep 26 17:55:55 2007 +0200
16115 TQM866M: adjust for doubled flash sector size.
16117 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
16118 doubled sector size.
16120 Signed-off-by: Martin Krause <martin.krause@tqs.de>
16122 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
16123 Author: Michal Simek <monstr@monstr.eu>
16124 Date: Sun Oct 14 16:12:29 2007 +0200
16126 [FIX] XUPV2P change command handling
16127 and remove code violation
16129 commit 636400198228d96983c06657b17f760f5989958e
16130 Author: Wolfgang Denk <wd@denx.de>
16131 Date: Sun Oct 14 00:13:19 2007 +0200
16133 Prepare for 1.3.0-rc3 release
16135 Signed-off-by: Wolfgang Denk <wd@denx.de>
16137 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
16138 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16139 Date: Sat Sep 29 13:41:37 2007 +0200
16141 Fix warning differ in signedness in cpu/pxa/mmc.c
16143 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16145 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
16146 Author: Wolfgang Denk <wd@denx.de>
16147 Date: Sat Oct 13 23:51:14 2007 +0200
16149 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
16151 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16152 Signed-off-by: Wolfgang Denk <wd@denx.de>
16154 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
16155 Author: Wolfgang Denk <wd@denx.de>
16156 Date: Sat Oct 13 21:15:39 2007 +0200
16158 Coding Style cleanup.
16160 Signed-off-by: Wolfgang Denk <wd@denx.de>
16162 commit e1893815b0999410d7a327589611c7b38e95299e
16163 Author: Wolfgang Denk <wd@denx.de>
16164 Date: Fri Oct 12 15:49:39 2007 +0200
16166 GP3 SSA: enable RTC
16168 Signed-off-by: Wolfgang Denk <wd@denx.de>
16170 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
16171 Author: Grzegorz Bernacki <gjb@semihalf.com>
16172 Date: Tue Oct 9 13:58:24 2007 +0200
16174 [ads5121] EEPROM support added.
16176 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16178 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
16179 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16180 Date: Sat Oct 6 18:55:35 2007 +0200
16182 AVR32: Initialize bi_flash* in board_init_r
16184 The ATSTK1000-specific flash driver intializes bi_flashstart,
16185 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
16188 Initialize these in board_init_r instead so that things will still be
16189 set up correctly when we switch to the CFI driver.
16191 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16193 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
16194 Author: Marian Balakowicz <m8@semihalf.com>
16195 Date: Fri Oct 5 10:40:54 2007 +0200
16197 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
16199 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
16201 commit 92869195ef8210758d2176230c0a36897afd50ed
16202 Author: Bartlomiej Sieka <tur@semihalf.com>
16203 Date: Fri Oct 5 09:46:06 2007 +0200
16205 CM5200: Fix missing null-termination in hostname manipulation code
16207 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16209 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
16210 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
16211 Date: Tue Oct 2 19:09:01 2007 +0200
16213 Fix memtest breakage
16215 CFG_MEMTEST_START uses weird magic involving gd, which fails to
16216 compile. Use hardcoded values instead (we actually know how much RAM
16219 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16221 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
16222 Author: Stefan Roese <sr@denx.de>
16223 Date: Tue Oct 2 11:44:46 2007 +0200
16225 ppc4xx: Coding style cleanup
16227 Signed-off-by: Stefan Roese <sr@denx.de>
16229 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
16230 Author: Stefan Roese <sr@denx.de>
16231 Date: Tue Oct 2 11:44:19 2007 +0200
16233 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
16235 Signed-off-by: Stefan Roese <sr@denx.de>
16237 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
16238 Author: Grzegorz Bernacki <gjb@semihalf.com>
16239 Date: Mon Oct 1 09:51:50 2007 +0200
16241 Program EPLD to force full duplex mode for PHY.
16243 EPLD forces modes of PHY operation. By default full duplex is turned off.
16244 This fix turns it on.
16246 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16248 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
16249 Author: Timo Ketola <timo.ketola@exertus.fi>
16250 Date: Mon Sep 24 14:50:32 2007 +0300
16252 Bugfix: Use only one PTD for one endpoint
16254 Original isp116x-hcd code prepared multiple PTDs for longer than 16
16255 byte transfers for one endpoint. That is unnecessary because the
16256 ISP116x is able to split long data from one PTD into multiple
16257 transactions based on the buffer size of the endpoint. It also caused
16258 serious problems if the endpoint NAKed some of the transactions. In
16259 that case ISP116x wouldn't notice that the other PTDs were for the same
16260 endpoint and would try the other PTDs possibly out of order. That would
16261 break the whole transfer.
16263 This patch makes isp116x_submit_job to use one PTD for one transfer.
16265 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
16266 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16268 commit 86ec86c04326c3913178a7679aa910de071da75d
16269 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16270 Date: Thu Sep 27 23:27:47 2007 +0200
16272 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
16274 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16276 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
16277 Author: Stefan Roese <sr@denx.de>
16278 Date: Tue Sep 11 14:12:55 2007 +0200
16280 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
16282 Signed-off-by: Stefan Roese <sr@denx.de>
16284 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
16285 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16286 Date: Wed Sep 26 16:35:54 2007 -0500
16288 85xx io out functions need sync after write.
16290 This fixes the mc146818 rtc_read/write functions for 85xx.
16292 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16294 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
16295 Author: Grant Likely <grant.likely@secretlab.ca>
16296 Date: Tue Sep 25 15:48:05 2007 -0600
16298 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
16300 CFG_FPGA_XILINX is a bit value used to test against the value in
16301 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
16302 think that is the intention in this code.
16304 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
16306 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
16307 Author: Michal Simek <monstr@monstr.eu>
16308 Date: Mon Sep 24 00:41:30 2007 +0200
16310 [FIX] change command handling and removing code violation
16312 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
16313 Author: Michal Simek <monstr@monstr.eu>
16314 Date: Mon Sep 24 00:36:06 2007 +0200
16316 [FIX] change sets of commands
16317 because changing of command handling brings
16318 compilation problems
16320 commit cb1bc63b75a232571eb69aa2c8aa919321655845
16321 Author: Michal Simek <monstr@monstr.eu>
16322 Date: Mon Sep 24 00:30:42 2007 +0200
16324 [FIX] Email reparation & Copyright
16325 Both codes are written by myself without any
16328 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
16329 Author: Michal Simek <monstr@monstr.eu>
16330 Date: Mon Sep 24 00:25:11 2007 +0200
16332 [PATCH] Change macro name for UartLite
16333 because PowerPC 405 can use UartLite as console
16335 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
16336 Author: Michal Simek <monstr@monstr.eu>
16337 Date: Mon Sep 24 00:21:19 2007 +0200
16339 [PATCH] Add support for design without interrupt controller
16342 commit 0731933ec8ec45d02ba89b52df673d526873cdde
16343 Author: Michal Simek <monstr@monstr.eu>
16344 Date: Mon Sep 24 00:19:48 2007 +0200
16346 [FIX] resolve problem with cpu without barrel shifter
16348 commit db14d77995ce515b728b178b63f82babe60e3d56
16349 Author: Michal Simek <monstr@monstr.eu>
16350 Date: Mon Sep 24 00:18:46 2007 +0200
16352 [FIX] repair email address
16354 commit 481d4328618804add1f818a6c96296121cd0528e
16355 Author: Michal Simek <monstr@monstr.eu>
16356 Date: Mon Sep 24 00:17:42 2007 +0200
16358 [FIX] repair MFSL commands
16360 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
16361 Author: Michal Simek <monstr@monstr.eu>
16362 Date: Mon Sep 24 00:08:37 2007 +0200
16364 synchronizition with mainline
16366 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
16367 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16368 Date: Sun Sep 23 02:42:38 2007 +0900
16370 sh: Add support command of ide with sh
16372 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16374 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
16375 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16376 Date: Sun Sep 23 02:38:42 2007 +0900
16378 sh: Update Makefile
16380 Add support MS7722SE01 to Makefile.
16382 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16384 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
16385 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16386 Date: Sun Sep 23 02:31:13 2007 +0900
16388 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
16390 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16392 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
16393 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16394 Date: Sun Sep 23 02:19:24 2007 +0900
16396 sh: Update MS7750SE01 platform
16398 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16400 commit 516ad760db3553766267ada01b7d5d727faa4bbd
16401 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16402 Date: Sun Sep 23 02:17:08 2007 +0900
16404 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
16406 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16408 commit b02bad128669e567fce87d8df823b06a0144b8db
16409 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16410 Date: Sun Sep 23 02:12:30 2007 +0900
16412 sh: Update core code of SuperH.
16414 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16416 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
16417 Author: Wolfgang Denk <wd@denx.de>
16418 Date: Thu Sep 20 00:04:14 2007 +0200
16422 Signed-off-by: Wolfgang Denk <wd@denx.de>
16424 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
16425 Author: Wolfgang Denk <wd@denx.de>
16426 Date: Tue Sep 18 21:36:35 2007 +0200
16428 Avoid compiler warning.
16430 Signed-off-by: Wolfgang Denk <wd@denx.de>
16432 commit 8a783a65851bc7421ab69f442261215e21b8891a
16433 Author: Grant Likely <grant.likely@secretlab.ca>
16434 Date: Tue Sep 18 12:24:57 2007 -0600
16436 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
16438 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
16439 nulls in a string differently. For example, the following statement:
16440 echo "this is a string\0" > afile
16441 Will produce the following with /bin/bash:
16442 "this is a string\0"
16443 But with /bin/dash, will produce:
16446 Bug fixed by moving the embedded null out of the makefile and into the
16447 config header. Also renamed the macro to avoid usage colision with the same
16448 macro used by other board ports.
16450 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
16452 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
16453 Author: Wolfgang Denk <wd@denx.de>
16454 Date: Tue Sep 18 17:40:27 2007 +0200
16456 MCC200: fix build warning
16458 The MCC200 board config file includes version.h for some customer-
16459 specific setting, which causes warnings with "make depend"; build
16460 version.h before depend.
16462 Signed-off-by: Wolfgang Denk <wd@denx.de>
16464 commit bd86220f58b99d6896198c385fda132f0c980915
16465 Author: Peter Pearse <peter.pearse@arm.com>
16466 Date: Tue Sep 18 13:07:54 2007 +0100
16468 Move coloured led API to status_led.h
16469 Improve indentation in drivers/at45.c
16471 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
16472 Author: Eirik Aanonsen <eaa@wprmedical.com>
16473 Date: Tue Sep 18 08:47:20 2007 +0200
16475 Update atstk1002 bootargs.
16477 Updates to atstk1002 U-Boot header file:
16478 - Changed bootargs:
16479 * Set the bootargs for at1002 to point to the SD-card partition instead
16480 * ... of the boot flash.
16481 * Removing the rootfstype since that argument are not needed.
16483 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
16484 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16486 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
16487 Author: Eirik Aanonsen <eaa@wprmedical.com>
16488 Date: Wed Sep 12 13:32:37 2007 +0200
16490 Add some comments to clocks in atstk1002.h
16492 This patch applies some clarifying comments to how the different
16493 clocks are setup according to atstk1002.h Some of the previous
16494 comments where stating wrongful information.
16496 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
16498 commit 97213f32416ead885deafea86774e912ffd60ad0
16499 Author: David Saada <David.Saada@ecitele.com>
16500 Date: Mon Sep 17 17:04:47 2007 +0200
16502 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
16504 Signed-off-by: David Saada <david.saada@ecitele.com>
16506 commit 30363e98fa470fbecea5e8bc0f1443352754f303
16507 Author: Stefan Roese <sr@denx.de>
16508 Date: Mon Sep 17 08:20:47 2007 +0200
16510 Small whitespace cleanup of OneNAND patch
16512 Signed-off-by: Stefan Roese <sr@denx.de>
16514 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
16515 Author: Kyungmin Park <kmpark@infradead.org>
16516 Date: Mon Sep 10 17:15:14 2007 +0900
16518 OneNAND support (take #2)
16520 [PATCH 3/3] OneNAND support (take #2)
16522 OneNAND support at U-Boot
16524 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
16526 commit 17aa2800457df0c06b41516f46f126712c196219
16527 Author: Kyungmin Park <kmpark@infradead.org>
16528 Date: Mon Sep 10 17:14:34 2007 +0900
16530 OneNAND support (take #2)
16532 [PATCH 2/3] OneNAND support (take #2)
16534 OneNAND support at U-Boot
16536 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
16538 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
16539 Author: Kyungmin Park <kmpark@infradead.org>
16540 Date: Mon Sep 10 17:13:49 2007 +0900
16542 OneNAND support (take #2)
16544 [PATCH 1/3] OneNAND support (take #2)
16546 OneNAND support at U-Boot
16548 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
16550 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
16551 Author: Michal Simek <monstr@monstr.eu>
16552 Date: Sun Sep 16 20:51:57 2007 +0200
16554 [FIX] remove files form repository
16556 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
16557 Author: Wolfgang Denk <wd@denx.de>
16558 Date: Sun Sep 16 17:10:04 2007 +0200
16560 TQM8xx[LM]: Fix broken environment alignment.
16562 With recent toolchains, the environment sectors were no longer aligned to
16563 sector boundaries. The reason was a combination of two bugs:
16565 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
16566 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
16567 this gets defined, is not included here (and cannot be included
16568 without causing lots of problems).
16570 Added a new #define CFG_USE_PPCENV for all boards which really
16571 want to put the environment is a ".ppcenv" section.
16573 2) The linker scripts just include environment.o, silently assuming
16574 that the objects in that file are really in the order in which
16575 they are coded in the C file, i. e. "environment" first, then
16576 "redundand_environment", and "env_size" last. However, current
16577 toolchains (GCC-4.x) reorder the objects, causing the environment
16578 data not to start on a flash sector boundary:
16580 Instead of: we got:
16582 40008000 T environment 40008000 T env_size
16583 4000c000 T redundand_environment 40008004 T redundand_environment
16584 40010000 T env_size 4000c004 T environment
16586 Note: this patch fixes just the first part, and cures the alignment
16587 problem by making sure that "env_size" gets placed correctly. However,
16588 we still have a potential issue because primary and redundant
16589 environment sectors are actually swapped, i. e. we have now:
16591 40008000 T redundand_environment
16592 4000c000 T environment
16593 40010000 T env_size
16595 This shall be fixed in the next version.
16597 Signed-off-by: Wolfgang Denk <wd@denx.de>
16599 commit eb6da8050797c204c9d010548424186c7ce32fc1
16600 Author: Wolfgang Denk <wd@denx.de>
16601 Date: Sun Sep 16 02:39:35 2007 +0200
16603 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
16605 Signed-off-by: Wolfgang Denk <wd@denx.de>
16607 commit cd2d1602c54cc6957bdef3872272a4b264893960
16608 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
16609 Date: Mon Sep 10 14:54:56 2007 -0400
16613 Fixup for the break statement in wrong place.
16615 [Patch by urwithsughosh@gmail.com]
16616 Acked-by: Andy Fleming <afleming@freescale.com>
16617 Signed-off-by: Wolfgang Denk <wd@denx.de>
16619 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
16620 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16621 Date: Tue Sep 11 17:04:00 2007 +0200
16623 Fix do_div() usage in nand process output
16625 Fix usage of do_div() in nand erase|read|write process output.
16627 The last patch to nand_util.c introduced do_div() instead of libgcc's
16628 implementation. But do_div() returns the quotient in its first
16629 macro parameter and not as result.
16631 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16633 commit c750d2e6692a000a82f29de7bf24e3dc21239161
16634 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16635 Date: Wed Sep 12 12:36:53 2007 +0200
16637 NAND: Add CFG_NAND_QUIET option
16639 This config option sets the default for the progress information
16640 output behavior that can also be configured through the 'quiet'
16641 environment variable.
16643 The legacy NAND code does not print the current progress info
16644 on the console. So this option is for backward compatibility for
16645 units that are in the field and where setting the quiet variable
16646 is not an option. With CFG_NAND_QUIET set to '1' the console
16647 progress info is turned off. This can still be overwritten
16648 through the environment variable.
16650 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16652 commit dcb88630290d2bcd803386dd4c2be73142994c4f
16653 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
16654 Date: Thu Sep 13 16:06:05 2007 -0700
16656 ColdFire: fix build error becasue of bad type of mii_init()
16658 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16660 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
16661 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
16662 Date: Thu Sep 13 16:04:05 2007 -0700
16664 ColdFire: Fix build error caused by pixis.c
16666 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
16668 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
16670 commit e21659e30660a1377c42af135a6114efe39801d9
16671 Author: Sam Sparks <SSparks@twacs.com>
16672 Date: Fri Sep 14 11:14:42 2007 -0600
16674 Update MPC8349ITX*_config to place config.tmp in right place.
16676 MPC834ITX*_config does not store config.tmp at the correct locatation,
16677 causing MPC8349ITXGP to have the wrong TEXT_BASE.
16679 Signed-off-by: Sam Sparks <SSparks@twacs.com>
16680 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
16682 commit 1218abf1b5817a39a82399b4b928b00750575bda
16683 Author: Wolfgang Denk <wd@denx.de>
16684 Date: Sat Sep 15 20:48:41 2007 +0200
16686 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
16688 Signed-off-by: Wolfgang Denk <wd@denx.de>
16690 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
16691 Author: Dirk Behme <dirk.behme@googlemail.com>
16692 Date: Sat Sep 15 11:55:42 2007 +0200
16694 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
16696 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
16699 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
16701 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
16703 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
16704 Author: Michal Simek <monstr@monstr.eu>
16705 Date: Sat Sep 15 00:03:35 2007 +0200
16707 Synchronize with U-BOOT mainline
16709 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
16710 Author: Sam Sparks <SSparks@twacs.com>
16711 Date: Fri Sep 14 11:14:42 2007 -0600
16713 Update MPC8349ITX*_config to place config.tmp in right place.
16715 MPC834ITX*_config does not store config.tmp at the correct locatation,
16716 causing MPC8349ITXGP to have the wrong TEXT_BASE.
16718 Signed-off-by: Sam Sparks <SSparks@twacs.com>
16719 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
16720 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16722 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
16723 Author: Bartlomiej Sieka <tur@semihalf.com>
16724 Date: Thu Sep 13 18:21:48 2007 +0200
16726 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
16728 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
16730 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
16731 Author: Bartlomiej Sieka <tur@semihalf.com>
16732 Date: Thu Sep 13 16:33:59 2007 +0200
16734 tqm5200: Restore customary env. variable boot commands for powerpc kernels
16736 - update default definitions of kernel_addr and fdt_addr env. variables
16737 - make arch/powerpc booting the default scenario
16738 - update MTD partition layout to match the above
16740 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
16742 commit f34024d4a328e6edd906456da98d2c537155c4f7
16743 Author: Wolfgang Denk <wd@denx.de>
16744 Date: Wed Sep 12 00:48:57 2007 +0200
16746 Fix memory corruption problem on STX GP3 SSA Board.
16748 Signed-off-by: Wolfgang Denk <wd@denx.de>
16750 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
16751 Author: Peter Pearse <peter.pearse@arm.com>
16752 Date: Tue Sep 11 15:35:01 2007 +0100
16756 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
16757 Author: Grzegorz Bernacki <gjb@semihalf.com>
16758 Date: Tue Sep 11 15:42:11 2007 +0200
16760 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
16761 scan on second pci bus.
16763 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16765 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
16766 Author: Grzegorz Bernacki <gjb@semihalf.com>
16767 Date: Tue Sep 11 12:57:52 2007 +0200
16769 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
16771 Bamboo has a file sdram.c which needs special treatment when building in
16772 separate directory. It has to be linked to build directory otherwise it is
16775 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16777 commit d45963854eff39d575124d859419bb4953ce2c87
16778 Author: Michal Simek <monstr@monstr.eu>
16779 Date: Tue Sep 11 00:37:04 2007 +0200
16781 [FIX] Microblaze ML401 - repare FLASH handling
16783 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
16784 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
16785 Date: Mon Sep 10 16:55:59 2007 +0100
16787 Allocate CPU Architecture Code for STMicroelectronics' ST200.
16789 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
16790 ---------------------------------------------------
16792 commit 754bac48156f8958d8f6a53a51eda88ab5758929
16793 Author: Wolfgang Denk <wd@denx.de>
16794 Date: Mon Sep 10 20:42:31 2007 +0200
16796 Update version to match current state.
16798 Signed-off-by: Wolfgang Denk <wd@denx.de>
16800 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
16801 Author: Grzegorz Bernacki <gjb@semihalf.com>
16802 Date: Mon Sep 10 17:39:08 2007 +0200
16804 [MPC512x] Streamline frame handling in the FEC driver
16806 - convert frame size settings to be derived from a single base
16807 - set frame size to the recommended default value
16809 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16811 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
16812 Author: Kyungmin Park <kmpark@infradead.org>
16813 Date: Mon Sep 10 11:34:00 2007 +0900
16815 Remove compiler warning: target CPU does not support interworking
16817 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
16819 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
16820 Author: Wolfgang Denk <wd@denx.de>
16821 Date: Sun Sep 9 21:21:33 2007 +0200
16823 Fix compile error in spc1920 config.
16825 Signed-off-by: Markus Klotzbücher <mk@denx.de>
16826 Signed-off-by: Wolfgang Denk <wd@denx.de>
16828 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
16829 Author: Grant Likely <grant.likely@secretlab.ca>
16830 Date: Fri Sep 7 09:25:07 2007 -0600
16832 Bugfix: make bootm+libfdt compile on boards with no flash
16834 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
16836 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
16837 Author: Grzegorz Bernacki <gjb@semihalf.com>
16838 Date: Fri Sep 7 18:35:37 2007 +0200
16840 [PPC440SPe] PCIe environment settings for Katmai and Yucca
16842 - 'pciconfighost' is set by default in order to be able to scan bridges
16843 behind the primary host/PCIe
16845 - 'pciscandelay' env variable is recognized to allow for user-controlled
16846 delay before the PCIe bus enumeration; some peripheral devices require a
16847 significant delay before they can be scanned (e.g. LSI8408E); without the
16848 delay they are not detected
16850 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16852 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
16853 Author: Grzegorz Bernacki <gjb@semihalf.com>
16854 Date: Fri Sep 7 18:20:23 2007 +0200
16856 [PPC440SPe] Improve PCIe configuration space access
16858 - correct configuration space mapping
16859 - correct bus numbering
16860 - better access to config space
16862 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
16863 first device on the first bus. We now allow to configure up to 16 buses;
16864 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
16865 peripheral devices farther in hierarchy can be identified.
16867 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16869 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
16870 Author: Grzegorz Bernacki <gjb@semihalf.com>
16871 Date: Fri Sep 7 17:46:18 2007 +0200
16873 [PPC440SPe] Convert machine check exceptions handling
16875 Convert using fixup mechanism to suppressing MCK for the duration of config
16876 read/write transaction: while fixups work fine with the case of a precise
16877 exception, we identified a major drawback with this approach when there's
16878 an imprecise case. In this scenario there is the following race condition:
16879 the fixup is (by design) set to catch the instruction following the one
16880 actually causing the exception; if an interrupt (e.g. decrementer) happens
16881 between those two instructions, the ISR code is executed before the fixup
16882 handler the machine check is no longer protected by the fixup handler as it
16883 appears as within the ISR code. In consequence the fixup approach is being
16884 phased out and replaced with explicit suppressing of MCK during a PCIe
16885 config read/write cycle.
16887 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16889 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
16890 Author: Wolfgang Denk <wd@denx.de>
16891 Date: Fri Sep 7 17:43:36 2007 +0200
16893 Fix typo in MAKEALL script.
16895 Signed-off-by: Wolfgang Denk <wd@denx.de>
16897 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
16898 Author: Grzegorz Bernacki <gjb@semihalf.com>
16899 Date: Fri Sep 7 17:09:21 2007 +0200
16901 [MPC512x] Proper handling of larger frames in the FEC driver
16903 When frame larger than local RX buffer is received, it is split and handled
16904 by two buffer descriptors. Prior to this patch the FEC driver discarded
16905 contents of a buffer descriptor without the 'LAST' bit set, so the first
16906 part of the frame was lost in case of larger frames. This fix allows to
16907 safely combine the two pieces into the whole frame.
16909 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
16911 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
16912 Author: Rafal Jaworowski <raj@semihalf.com>
16913 Date: Fri Sep 7 17:05:36 2007 +0200
16915 [MPC512x] Correct fixup relocation
16917 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
16919 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
16920 Author: Wolfgang Denk <wd@denx.de>
16921 Date: Fri Sep 7 01:21:25 2007 +0200
16923 Update CHANGELOG, minor coding style cleanup.
16925 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
16926 Author: stefano babic <sbabic@denx.de>
16927 Date: Thu Aug 30 23:01:49 2007 +0200
16929 PXA270: Added support for TrizepsIV board.
16931 This patch add support for the Trizeps IV module (520Mhz).
16933 Signed-off-by: Stefano Babic <sbabic@denx.de>
16935 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
16936 Author: stefano babic <sbabic@denx.de>
16937 Date: Thu Aug 30 22:57:04 2007 +0200
16939 PXA270: Add support for multiple serial ports.
16941 This patch adds support for multiple serial ports to the PXA target.
16942 FFUART, BTUART and STUART are supported.
16944 Signed-off-by: Stefano Babic <sbabic@denx.de>
16946 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
16947 Author: stefano babic <sbabic@denx.de>
16948 Date: Thu Aug 30 22:48:47 2007 +0200
16950 PXA270: fix compile issue (invalid lvalue)
16952 Code is broken for PXA270 due to "invalid lvalue in assignment".
16954 This patch fix it in pxa-regs.h
16956 Signed-off-by: Stefano Babic <sbabic@denx.de>
16958 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
16959 Author: Jason Jin <Jason.jin@freescale.com>
16960 Date: Thu Aug 30 18:19:05 2007 +0800
16962 Add BUILD_DIR support for bios emulator.
16964 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
16966 commit b4d8a55145442f136982634862341a3e02002bda
16967 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
16968 Date: Fri Aug 31 14:41:51 2007 +0900
16970 [MIPS] Remove inline asm string functions
16972 Stop using inline string functions on MIPS as other ARCHs do so,
16973 since the optimized inline asm versions are not small.
16975 This change is triggered by a following MIPS build error:
16976 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
16977 common/exports.c:32: undefined reference to `strcmp'
16978 make: *** [u-boot] Error 1
16980 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
16982 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
16983 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
16984 Date: Fri Aug 31 14:41:45 2007 +0900
16986 [MIPS] Update asm string header
16988 This patches contains several bugfixes and cleanups in the latest upstream:
16990 - Don't include linux/config.h
16991 - Remove buggy inline version of memscan.
16992 - Merge with Linux 2.6.11-rc3.
16993 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
16994 - Goodbye mips64. 31704 lines of code bite the dust.
16995 - Replace extern inline with static inline.
16996 - Fix return value of strncpy.
16997 - Remove a bunch more "$1" clobbers.
16999 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
17001 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
17002 Author: Bartlomiej Sieka <tur@semihalf.com>
17003 Date: Tue Sep 4 17:31:22 2007 +0200
17005 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
17007 Fix incorrect blob address calculation in do_bootm_linux() that prevents
17008 booting the kernel from a multi-file image (kernel + initrd + blob).
17010 Also, make minor updates to the U-Boot's output and to the coding style.
17012 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
17014 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
17015 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
17016 Date: Fri Aug 31 14:29:04 2007 +0200
17018 Add support for Sil680 IDE controller.
17020 o add drivers/sil680.c to support the Sil680 IDE-controller.
17021 o drivers/Makefile: add sil680.o.
17023 Signed-off-by: Gary Jennejohn <garyj@denx.de>
17025 commit e79021223bc339df655e360645a52c457a74b067
17026 Author: Grant Likely <grant.likely@secretlab.ca>
17027 Date: Thu Sep 6 09:47:40 2007 -0600
17029 bootm/fdt: Only process the fdt if an fdt address was provided
17031 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
17032 kernels using the board info structure (instead of passing a device tree)
17033 This change allows the old style booting to be used if the fdt argument
17034 was not passed to 'bootm'.
17036 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
17037 Acked-by: Kim Phillips <kim.phillips@freescale.com>
17039 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
17040 Author: Grant Likely <grant.likely@secretlab.ca>
17041 Date: Thu Sep 6 09:46:23 2007 -0600
17043 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
17045 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
17047 Tested on: lite5200b
17049 Note: the fixup functions have not been moved to a common place. This
17050 patch is targeted for immediate merging as in solves a build issue, but
17051 the final name/location of the fixups is still subject to debate. I
17052 propose to merge this now, and move the fixups in the next merge window
17053 to be usable by all targets.
17055 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
17057 commit 41bb76e941929f54a73206fb132f7a4c275543a3
17058 Author: Grant Likely <grant.likely@secretlab.ca>
17059 Date: Thu Sep 6 09:46:17 2007 -0600
17061 libfdt: add convenience function fdt_find_and_setprop()
17063 Given the path to a node, fdt_find_and_setprop() allows a property value
17064 to be set directly.
17066 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
17068 commit 80767a6cead9990d9e77e62be947843c2c72f469
17069 Author: Peter Pearse <peter.pearse@arm.com>
17070 Date: Wed Sep 5 16:04:41 2007 +0100
17072 Changed API name to coloured_led.h
17073 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
17074 Tidied other cpu/arm920t/start.S code
17076 commit 56a9270521baaa00e12639a978302a67f61ef060
17077 Author: Kumar Gala <galak@kernel.crashing.org>
17078 Date: Thu Aug 30 16:18:18 2007 -0500
17080 Fix ULI RTC support on MPC8544 DS
17082 The RTC on the M1575 ULI chipset requires a dummy read before
17083 we are able to talk to the RTC. We accomplish this by adding a
17084 second memory region to the PHB the ULI is on and read from it.
17086 The second region is added to maintain compatiabilty with Linux's
17087 view of the PCI memory map.
17089 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17091 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
17092 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17093 Date: Thu Aug 30 01:58:48 2007 -0500
17095 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
17097 pcie is now differentiated from pci. Add 8641 bus-range updates.
17099 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17101 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
17102 Author: Peter Pearse <peter.pearse@arm.com>
17103 Date: Tue Sep 4 16:18:38 2007 +0100
17105 Add coloured led interface for ARM boards.
17106 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
17108 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
17109 Author: Peter Pearse <peter.pearse@arm.com>
17110 Date: Tue Sep 4 14:49:28 2007 +0100
17112 Move include/led.h to board/at91rm9200dk
17114 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
17115 Author: Peter Pearse <peter.pearse@arm.com>
17116 Date: Tue Sep 4 14:25:51 2007 +0100
17118 Ran Lindent on drivers/at45.c
17120 commit 557ab89d294f08dd532f21d19861b40093200a33
17121 Author: Peter Pearse <peter.pearse@arm.com>
17122 Date: Tue Sep 4 14:23:50 2007 +0100
17124 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
17126 commit 81b73dec16fd1227369a191e725e10044a9d56b8
17127 Author: Gary Jennejohn <garyj@denx.de>
17128 Date: Fri Aug 31 15:21:46 2007 +0200
17130 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
17132 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
17133 set to non-zero, because it doesn't support MRM (memory-read-
17134 multiple) correctly. We now added the possibility to configure
17135 this register in the board config file, so that the default value
17136 of 8 can be overridden.
17138 Here the details of this patch:
17140 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
17141 board-specific settings. As an example the sequoia board requires 0.
17142 Idea from Stefan Roese <sr@denx.de>.
17143 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
17144 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
17145 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
17146 CFG_PCI_CACHE_LINE_SIZE to 0.
17148 Signed-off-by: Gary Jennejohn <garyj@denx.de>
17149 Signed-off-by: Stefan Roese <sr@denx.de>
17151 commit 60174746c668b309378a91488dded898e9553eae
17152 Author: Wolfgang Denk <wd@denx.de>
17153 Date: Fri Aug 31 10:01:51 2007 +0200
17155 Fix TFTP OACK code for short packets.
17157 The old code had a loop limit overflow bug which caused a semi-
17158 infinite loop for small packets, because in "i<len-8", "i" was signed,
17159 but "len" was unsigned, and "len-8" became a huge number for small
17162 This is a workaround which replaces broken commit 8f1bc284.
17164 Signed-off-by: Wolfgang Denk <wd@denx.de>
17166 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
17167 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
17168 Date: Thu Aug 30 15:03:05 2007 +0200
17170 Reduce BOOTDELAY variable to 1 second by default for STK1002
17172 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
17173 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17175 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
17176 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
17177 Date: Thu Aug 30 15:03:04 2007 +0200
17179 Remove double quotation marks around MAC address for STK1002
17181 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
17182 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17184 commit ff13ac8c7bbebb238e339592de765c546dba1073
17185 Author: Wolfgang Denk <wd@denx.de>
17186 Date: Thu Aug 30 14:42:15 2007 +0200
17188 Backout commit 8f1bc284 as it causes TFTP to fail.
17190 Signed-off-by: Wolfgang Denk <wd@denx.de>
17192 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
17193 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17194 Date: Thu Aug 30 02:26:17 2007 -0500
17196 Revert "Fix MPC8544DS PCIe3 scsi."
17198 This reverts commit 9468e680.
17199 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
17201 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17203 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
17204 Author: Grant Likely <grant.likely@secretlab.ca>
17205 Date: Wed Aug 29 18:26:24 2007 -0600
17207 tftp: don't implicity trust the format of recevied packets
17209 The TFTP OACK code trusts that the incoming packet is formated as
17210 ASCII text and can be processed by string functions. It also has a
17211 loop limit overflow bug where if the packet length is less than 8, it
17212 ends up looping over *all* of memory to find the 'blksize' string.
17214 This patch solves the problem by forcing the packet to be null
17215 terminated and using strstr() to search for the sub string.
17217 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
17219 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
17220 Author: Stefan Roese <sr@denx.de>
17221 Date: Wed Aug 29 16:31:18 2007 +0200
17223 ppc4xx: Change lwmon5 default environment to support Linux RTC
17225 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
17226 to supply the RTC I2C address as bootline parameter. This patch
17227 adds support for this rtc probing parameter to the bootargs:
17229 "rtc-pcf8563.probe=0,0x51"
17231 Signed-off-by: Stefan Roese <sr@denx.de>
17233 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
17234 Author: Kim Phillips <kim.phillips@freescale.com>
17235 Date: Wed Aug 29 09:06:05 2007 -0500
17237 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
17239 this had slipped through the cracks, since the sbc board was added
17240 after I wrote the original patch to remove all these symbols, and
17241 before it was merged.
17243 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17245 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
17246 Author: Wolfgang Denk <wd@denx.de>
17247 Date: Wed Aug 29 14:05:30 2007 +0200
17249 Add mii_init() prototype
17251 to get rid of a *lot* of compiler warnings.
17253 Signed-off-by: Wolfgang Denk <wd@denx.de>
17255 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
17256 Author: Wolfgang Denk <wd@denx.de>
17257 Date: Wed Aug 29 13:35:03 2007 +0200
17259 Disable network support on cmi_mpc5xx board
17261 ..because it caused compiler errors and there seems to be no
17262 board maintainer to take care of this.
17264 Signed-off-by: Wolfgang Denk <wd@denx.de>
17266 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
17267 Author: Kumar Gala <galak@kernel.crashing.org>
17268 Date: Mon Aug 20 09:44:00 2007 -0500
17270 Fix MPC8544DS PCIe3 scsi.
17272 <ed.swarthout@freescale.com>
17274 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
17275 is allocating memory space it doesn't need.
17277 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
17278 Signed-off-by: Andy Fleming <afleming@freescale.com>
17280 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
17281 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17282 Date: Tue Aug 21 09:38:59 2007 -0500
17286 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
17287 correct consoledev needed for linux boot.
17288 Standardize on fdt{file,addr} var to hold dtb file name.
17290 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
17292 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
17294 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
17295 Author: Haiying Wang <Haiying.Wang@freescale.com>
17296 Date: Thu Aug 23 15:20:54 2007 -0400
17298 Enable L2 cache for MPC8568MDS board
17300 The L2 cache size is 512KB for 8568, print out the correct informaiton.
17302 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17304 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
17305 Author: Jason Jin <Jason.jin@freescale.com>
17306 Date: Wed Aug 22 17:54:49 2007 +0800
17308 Remove the bios emulator binary files from MAI board
17310 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
17312 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
17313 Author: Kim Phillips <kim.phillips@freescale.com>
17314 Date: Tue Aug 21 17:00:17 2007 -0500
17316 support board vendor-common makefiles
17318 if a board/$(VENDOR)/common/Makefile exists, build it.
17320 also add the first such case, board/freescale/common/Makefile, to
17321 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
17322 dictated by board configuration.
17324 thusly get rid of alternate build dir errors such as:
17326 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
17328 by putting the common/ mkdir command in its proper place (the common
17329 Makefile). Common bits from existing individual board Makefiles have
17332 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17334 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
17335 Author: stefano babic <sbabic@denx.de>
17336 Date: Tue Aug 21 15:52:33 2007 +0200
17338 Fix: TFTP is not working on little endian systems
17340 TFTP does not work anymore after multicast tftp
17341 patch was applied on little endian systems.
17344 Signed-off-by: Stefano Babic <sbabic@denx.de>
17346 commit 5f470948570526e9186f053a3003da7719604e90
17347 Author: stefano babic <sbabic@denx.de>
17348 Date: Tue Aug 21 15:50:33 2007 +0200
17350 Fix MAC address setting in DM9000 driver.
17352 The logic to check if there is a correct MAC address in the DM9000
17353 EEPROM, added in the last patch, is wrong. Now the MAC address is
17354 always taken from the environment, even if a suitable MAC is present
17357 Signed-off-by: Stefano Babic <sbabic@denx.de>
17359 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
17360 Author: Martin Krause <martin.krause@tqs.de>
17361 Date: Tue Aug 21 12:40:34 2007 +0200
17363 MPC5xxx: fix some compiler warnings in USB code
17365 Fix the following warnings:
17366 - usb.c:xx: warning: function declaration isn't a prototype
17367 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
17368 from pointer wihtout a cast
17370 Signed-off-by: Martin Krause <martin.krase@tqs.de>
17372 commit 16e23c3f5dab6937f5109365416808c7f15c122b
17373 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
17374 Date: Mon Aug 20 23:55:33 2007 -0500
17376 fsl_pci_init - Remove self PCSRBAR allocation
17378 CPU physical address space was being wasted by allocating a
17379 PCSRBAR PCI inbound region to it's memory space.
17381 As a rule, PCSRBAR should be left alone since it does not affect
17382 transactions from self and other masters may have changed it.
17384 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
17386 commit 0e700ce03a23bb1921149bc77008ace7103d5289
17387 Author: Martin Krause <martin.krause@tqs.de>
17388 Date: Mon Aug 20 13:56:47 2007 +0200
17390 Fix compiler warning in include/s3c2410.h
17392 This patch fixes the "type qualifiers ignored on fuction return tpye"
17393 warning for include/s3c2410.h
17395 Signed-off-by: Martin Krause <martin.krause@tqs.de>
17397 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
17398 Author: Dirk Behme <dirk.behme@googlemail.com>
17399 Date: Mon Aug 20 07:09:05 2007 +0200
17401 Fix compilation error for omap2420h4_config.
17403 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
17404 and flash_probe() calls in env_flash.c.
17406 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
17408 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
17409 Author: Kim Phillips <kim.phillips@freescale.com>
17410 Date: Fri Aug 10 14:34:14 2007 -0500
17412 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
17414 and make some minor corrections to the FDT part of the README.
17416 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17418 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
17419 Author: Wolfgang Denk <wd@denx.de>
17420 Date: Wed Aug 29 01:32:05 2007 +0200
17422 Minor coding style cleanup.
17424 Signed-off-by: Wolfgang Denk <wd@denx.de>
17426 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
17427 Author: Heiko Schocher <hs@pollux.denx.de>
17428 Date: Tue Aug 28 17:40:33 2007 +0200
17430 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
17432 Signed-off-by: Heiko Schocher <hs@denx.de>
17434 commit f98984cb194bb34dbe1db9429d3b51133af30d07
17435 Author: Heiko Schocher <hs@pollux.denx.de>
17436 Date: Tue Aug 28 17:39:14 2007 +0200
17438 IDE: - make ide_inb () and ide_outb () "weak", so boards can
17439 define there own I/O functions.
17440 (Needed for the pcs440ep board).
17441 - The default I/O Functions are again 8 Bit accesses.
17442 - Added CONFIG_CMD_IDE for the pcs440ep Board.
17444 Signed-off-by: Heiko Schocher <hs@denx.de>
17446 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
17447 Author: Semih Hazar <semih.hazar@indefia.com>
17448 Date: Mon Aug 20 19:00:01 2007 +0300
17450 AVR32: Change prototype of memset
17452 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
17453 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17455 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
17456 Author: Yuri Tikhonov <yur@emcraft.com>
17457 Date: Sat Aug 25 05:07:16 2007 +0200
17459 POST: limit memory test area to not touch global data anymore
17461 As experienced on lwmon5, on some boards the POST memory test can
17462 corrupt the global data buffer (bd). This patch fixes this issue
17463 by checking and limiting this area.
17465 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
17466 Signed-off-by: Stefan Roese <sr@denx.de>
17468 commit 75e1a84d483e36be10e206e539b028c4889e1158
17469 Author: Stefan Roese <sr@denx.de>
17470 Date: Fri Aug 24 15:41:42 2007 +0200
17472 ppc4xx: Add RTC POST test to lwmon5 board configuration
17474 Since this RTC POST test is taking quite a while to complete
17475 it's only initiated upon special keypress same as the complete
17478 Signed-off-by: Stefan Roese <sr@denx.de>
17480 commit d7bfa620037a6d2210159387571bdf93aa32c162
17481 Author: Stefan Roese <sr@denx.de>
17482 Date: Fri Aug 24 15:19:10 2007 +0200
17484 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
17486 Signed-off-by: Stefan Roese <sr@denx.de>
17488 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
17489 Author: Stefan Roese <sr@denx.de>
17490 Date: Thu Aug 23 11:02:37 2007 +0200
17492 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
17494 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
17495 board. Now the "eeprom" command can be used to read/write from/to this
17496 device. Additionally a new command was added "eepromwp" to en-/disable
17497 the write-protect of this 2nd EEPROM.
17499 The 1st EEPROM is not affected by this write-protect command.
17501 Signed-off-by: Stefan Roese <sr@denx.de>
17503 commit c64fb30e4c5976007d56fc1789c7a0666082b536
17504 Author: Stefan Roese <sr@denx.de>
17505 Date: Wed Aug 22 08:56:09 2007 +0200
17507 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
17509 Signed-off-by: Stefan Roese <sr@denx.de>
17511 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
17512 Author: Stefan Roese <sr@denx.de>
17513 Date: Tue Aug 21 16:27:57 2007 +0200
17515 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
17517 This patch adds support for the matrix keyboard on the lwmon5 board.
17518 Since the implementation in the dsPCI is kind of compatible with the
17519 "old" lwmon board, most of the code is copied from the lwmon
17522 Signed-off-by: Stefan Roese <sr@denx.de>
17524 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
17525 Author: Wolfgang Denk <wd@denx.de>
17526 Date: Sun Aug 19 10:27:34 2007 +0200
17528 Fix some build errors.
17530 Signed-off-by: Wolfgang Denk <wd@denx.de>
17532 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
17533 Author: Wolfgang Denk <wd@denx.de>
17534 Date: Sat Aug 18 22:00:38 2007 +0200
17538 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
17539 Author: Kim Phillips <kim.phillips@freescale.com>
17540 Date: Thu Aug 16 22:52:39 2007 -0500
17542 lib_ppc: make board_add_ram_info weak
17544 platforms wishing to display RAM diagnostics in addition to size,
17545 can do so, on one line, in their own board_add_ram_info()
17548 this consequently eliminates CONFIG_ADD_RAM_INFO.
17550 Thanks to Stefan for the hint.
17552 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17554 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
17555 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
17556 Date: Fri Aug 17 12:43:44 2007 +0900
17558 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
17560 This patch has been sent on:
17563 Many users of PCI config read routines tend to ignore the function
17564 ret value, and are only concerned about the contents of *val. Based
17565 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
17566 the *val on dword read error.
17568 Without this fix, for example, we'll go on scanning bus with vendor or
17569 header_type uninitialized. This brings many unnecessary config trials.
17571 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
17573 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
17574 Author: Stefan Roese <sr@denx.de>
17575 Date: Sat Aug 18 14:37:52 2007 +0200
17577 ColdFire: Fix some remaining problems with CFG_CMD_
17579 Signed-off-by: Stefan Roese <sr@denx.de>
17581 commit 8280f6a1c43247616b68224675188e5ccd124650
17582 Author: Stefan Roese <sr@denx.de>
17583 Date: Sat Aug 18 14:33:02 2007 +0200
17585 Coding style cleanup
17587 Signed-off-by: Stefan Roese <sr@denx.de>
17589 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
17590 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17591 Date: Thu Aug 16 19:23:50 2007 -0500
17593 ColdFire: Add M5235EVB Platform for MCF523x
17595 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17597 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
17598 Author: Kim Phillips <kim.phillips@freescale.com>
17599 Date: Fri Aug 17 09:30:00 2007 -0500
17601 mpc83xx: fix typo in DDR2 programming
17603 introduced in the implement board_add_ram_info patch as I was cleaning out the
17604 magic numbers. sorry.
17606 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17608 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
17609 Author: Kim Phillips <kim.phillips@freescale.com>
17610 Date: Thu Aug 16 22:53:09 2007 -0500
17612 mpc83xx: move freescale boards to boards/freescale
17614 includes build fixes.
17616 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17618 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
17619 Author: Kim Phillips <kim.phillips@freescale.com>
17620 Date: Thu Aug 16 22:52:59 2007 -0500
17622 mpc83xx: suppress unused variable 'val8' warning
17624 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17626 commit bbea46f76f767b919070b4829bf34c86bd223248
17627 Author: Kim Phillips <kim.phillips@freescale.com>
17628 Date: Thu Aug 16 22:52:48 2007 -0500
17630 mpc83xx: implement board_add_ram_info
17632 add board_add_ram_info, to make memory diagnostic output more
17633 consistent. u-boot banner output now looks like:
17635 DRAM: 256 MB (DDR1, 64-bit, ECC on)
17637 and for boards with SDRAM on the local bus, a line such as this is
17640 SDRAM: 64 MB (local bus)
17642 also replaced some magic numbers with their equivalent define names.
17644 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17646 commit 14778585d1389d86d5846efec29e5fce892680ce
17647 Author: Tony Li <tony.li@freescale.com>
17648 Date: Fri Aug 17 10:35:59 2007 +0800
17650 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
17652 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
17653 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
17655 Signed-off-by Tony Li <tony.li@freescale.com>
17657 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
17658 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17659 Date: Thu Aug 16 15:05:11 2007 -0500
17661 ColdFire: Add M54455EVB for MCF5445x
17663 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17665 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
17666 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17667 Date: Thu Aug 16 13:20:50 2007 -0500
17669 ColdFire: Add M5253EVBE platform for MCF52x2
17671 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17673 commit a605aacd8324094199402816cc6d9124aba57b8d
17674 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17675 Date: Thu Aug 16 05:04:31 2007 -0500
17677 ColdFire: Add M5249EVB platform for MCF52x2
17679 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17681 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
17682 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17683 Date: Wed Aug 15 20:32:06 2007 -0500
17685 ColdFire: Update Freescale MCF52x2 platforms
17687 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17689 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
17690 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17691 Date: Wed Aug 15 19:55:10 2007 -0500
17693 ColdFire: Update EB+MCF-EV123 platform
17695 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17697 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
17698 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17699 Date: Wed Aug 15 19:46:38 2007 -0500
17701 ColdFire: update TASREG platform for MCF52x2
17703 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17705 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
17706 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17707 Date: Wed Aug 15 19:45:51 2007 -0500
17709 ColdFire: update r5200 platform for MCF52x2
17711 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17713 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
17714 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17715 Date: Wed Aug 15 19:43:20 2007 -0500
17717 ColdFire: idmr platform MCF52x2 update
17719 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17721 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
17722 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17723 Date: Wed Aug 15 19:41:06 2007 -0500
17725 ColdFire: cobra5272 platform for MCF52x2 update
17727 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17729 commit 56115665b4a64c10c01440c57749b265e0908fa4
17730 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17731 Date: Wed Aug 15 19:38:15 2007 -0500
17733 ColdFire: MCF52x2 Header files update
17735 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17737 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
17738 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17739 Date: Wed Aug 15 19:21:21 2007 -0500
17741 ColdFire: MCF52x2 update
17743 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17745 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
17746 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17747 Date: Wed Aug 15 18:46:11 2007 -0500
17749 ColdFire: MCF5329 update cache
17751 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17753 commit 7171977fb8fd77cfb6676953fa9a05789c450513
17754 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17755 Date: Wed Aug 15 15:40:20 2007 -0500
17757 ColdFire: MCF5329 header file clean up
17759 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17761 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
17762 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17763 Date: Wed Aug 15 15:39:17 2007 -0500
17765 ColdFire: MCF5329 Update and cleanup
17767 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
17769 commit 10327dc5541f947c0cf7e31fef86c4706169607a
17770 Author: Andy Fleming <afleming@freescale.com>
17771 Date: Thu Aug 16 16:35:02 2007 -0500
17773 Add CONFIG_HAS_ETH0 to all boards with TSEC
17775 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
17776 to update TSEC1's device-tree node, so we need to add it
17777 to all the boards with TSECs. Do this for 83xx and 86xx, too,
17778 since they will eventually do something similar.
17780 Signed-off-by: Andy Fleming <afleming@freescale.com>
17782 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
17783 Author: Kumar Gala <galak@kernel.crashing.org>
17784 Date: Thu Aug 16 15:05:04 2007 -0500
17786 Update MPC8544 DS PCI memory map
17788 The PCIe bus that the ULI M1575 is connected to has no possible way of
17789 needing more than the fixed amount of IO & Memory space needed by the ULI.
17791 So make it use far less IO & memory space and have it use the shared LAW. This
17792 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
17795 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17797 commit ea5877e31ed63ade948fd1293895ec23fe01472e
17798 Author: Kumar Gala <galak@kernel.crashing.org>
17799 Date: Thu Aug 16 11:01:21 2007 -0500
17801 Fix up some fdt issues on 8544DS
17803 It looks like we had a merge issue that duplicated a bit of code
17804 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
17805 the MAC address properly set in the device tree on boot for TSEC1
17807 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17809 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
17810 Author: Niklaus Giger <niklaus.giger@netstal.com>
17811 Date: Thu Aug 16 15:16:03 2007 +0200
17813 PPC4xx:HCU4/5 cleanup
17815 Minor cleanups to confirm to the u-boot coding style.
17816 Some german expressions -> english.
17817 HCU5 enforces a unique IP adress for a given slot in the rack.
17819 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17821 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
17822 Author: Niklaus Giger <niklaus.giger@netstal.com>
17823 Date: Thu Aug 16 15:16:02 2007 +0200
17825 PPC4xx:HCU4/5 cleanup ecc/sdram init
17827 Make ecc initialisation robust, as DDR2-ECC errors may be generated
17828 while zeroing the RAM.
17830 Return 16 bytes (a cacheline) less than the available memory, as the
17831 board and/or PPC440EPx might have problems accessing the last bytes.
17833 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17835 commit d35b508a55508535b6e8445b718585d27df733d3
17836 Author: Kim Phillips <kim.phillips@freescale.com>
17837 Date: Wed Aug 15 22:29:56 2007 -0500
17839 fdt: suppress unused variable 'bd' warning
17841 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17843 commit 82bd9ee77490588d4da785d75829ca63d0176baf
17844 Author: Andy Fleming <afleming@freescale.com>
17845 Date: Wed Aug 15 20:06:50 2007 -0500
17847 Fix warnings from of_data copy fix
17849 Forgot to cast of_flat_tree to ulong.
17851 Signed-off-by: Andy Fleming <afleming@freescale.com>
17853 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
17854 Author: Andy Fleming <afleming@freescale.com>
17855 Date: Wed Aug 15 20:03:44 2007 -0500
17857 Don't wait for disconnected TSECs
17859 The TSEC driver's PHY code waits a long time for autonegotiation to
17860 complete, even if the link is down. The PHY knows the link is
17861 down or up before autonegotiation completes, so we can short-circuit
17862 the process if the link is down.
17864 Signed-off-by: Andy Fleming <afleming@freescale.com>
17866 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
17867 Author: Andy Fleming <afleming@freescale.com>
17868 Date: Wed Aug 15 20:03:34 2007 -0500
17870 Fix numerous bugs in the 8568 UEC support
17872 Actually, fixed a large bug in the UEC for *all* platforms.
17873 How did this ever work?
17875 uec_init() did not follow the spec for eth_init(), and returned
17876 0 on success. Switch it to return the link like tsec_init()
17879 The immap for the 8568 was defined based on MPC8568, rather than
17884 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
17886 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
17889 Signed-off-by: Andy Fleming <afleming@freescale.com>
17891 commit 3a79013e2adda53332dfd0b511066a805e929a9d
17892 Author: Andy Fleming <afleming@freescale.com>
17893 Date: Wed Aug 15 20:03:25 2007 -0500
17895 Define tsec flag values in config files
17897 The tsec_info structure and array has a "flags" field for each
17898 ethernet controller. This field is the only reason there are
17899 settings. Switch to defining TSECn_FLAGS for each controller
17900 in the config header, and we can greatly simplify the array, and
17901 also simplify the addition of future boards.
17903 Signed-off-by: Andy Fleming <afleming@freescale.com>
17905 commit ec7238229507e7f47533a611ea8c53319d234cf3
17906 Author: Andy Fleming <afleming@freescale.com>
17907 Date: Wed Aug 15 20:03:13 2007 -0500
17909 Add support for building all boards with a TSEC
17911 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
17912 Now we can do a MAKEALL test on all of them!
17914 Signed-off-by: Andy Fleming <afleming@freescale.com>
17916 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
17917 Author: Andy Fleming <afleming@freescale.com>
17918 Date: Wed Aug 15 17:30:56 2007 -0500
17920 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
17922 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
17923 neglected to *also* put the code inside the similar #ifdef
17924 for CONFIG_OF_FLAT_TREE.
17926 Signed-off-by: Andy Fleming <afleming@freescale.com>
17928 commit 78f9fef7f406078c8bf7191e665a73f795157746
17929 Author: Scott Wood <scottwood@freescale.com>
17930 Date: Wed Aug 15 15:46:46 2007 -0500
17932 mpc885ads: Don't define CONFIG_BZIP2.
17934 bzip2 requires a significant chunk of malloc space, and there isn't
17935 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
17936 and a downloaded image at 0x400000.
17938 Signed-off-by: Scott Wood <scottwood@freescale.com>
17940 commit 002275a3ed8b114885f6702d6d544d0780dfe689
17941 Author: Michal Simek <Monstr@seznam.cz>
17942 Date: Thu Aug 16 08:54:10 2007 +0200
17944 Bios emulator - fix microblaze toolchain problem
17946 microblaze CPU have problem with bios_emulator code.
17947 Microblaze toolchain doesn't support PRAGMA PACK.
17949 Signed-off-by: Michal Simek <monstr@monstr.eu>
17951 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
17952 Author: Wolfgang Denk <wd@denx.de>
17953 Date: Thu Aug 16 11:51:04 2007 +0200
17955 Minor Coding Style fix; Update CHANGELOG file.
17957 Signed-off-by: Wolfgang Denk <wd@denx.de>
17959 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
17960 Author: Stefan Roese <sr@denx.de>
17961 Date: Thu Aug 16 11:21:49 2007 +0200
17963 ppc4xx: Remove #warning in esd auto_update.c
17965 Signed-off-by: Stefan Roese <sr@denx.de>
17967 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
17968 Author: Stefan Roese <sr@denx.de>
17969 Date: Fri Jun 22 17:32:28 2007 +0200
17971 ppc7xx: Update CPCI750 board
17973 This small CPCI750 update extends the board specific command
17974 "show_config" to display the Marvell strapping registers and
17975 extends the PCI IDE controller.
17977 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
17978 Signed-off-by: Stefan Roese <sr@denx.de>
17980 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
17981 Author: Michal Simek <monstr@monstr.eu>
17982 Date: Thu Aug 16 10:46:28 2007 +0200
17984 [FIX] Changes for bios_emulator code for others architecture
17986 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
17987 Author: Michal Simek <monstr@monstr.eu>
17988 Date: Thu Aug 16 10:45:09 2007 +0200
17990 [FIX] Remove unused include file
17992 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
17993 Author: Stefan Roese <sr@denx.de>
17994 Date: Thu Aug 16 10:18:33 2007 +0200
17996 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
17998 Signed-off-by: Stefan Roese <sr@denx.de>
18000 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
18001 Author: Stefan Roese <sr@denx.de>
18002 Date: Thu Aug 16 09:54:51 2007 +0200
18004 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
18006 Signed-off-by: Stefan Roese <sr@denx.de>
18008 commit 02ba7022f62bb75908296c58c63866e1d294b69a
18009 Author: Stefan Roese <sr@denx.de>
18010 Date: Thu Aug 16 09:52:29 2007 +0200
18012 ppc4xx: Update Sequoia/Rainier bootstrap command
18014 As suggested by David Mitchell, here an update for the Sequoia/Rainier
18017 Signed-off-by: Stefan Roese <sr@denx.de>
18019 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
18020 Author: Kim Phillips <kim.phillips@freescale.com>
18021 Date: Wed Aug 15 22:30:39 2007 -0500
18023 mpc83xx: enable libfdt by default on freescale boards
18025 this enables libfdt code by default for the
18026 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
18027 mpc8349itx and gp boards.
18029 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18031 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
18032 Author: Kim Phillips <kim.phillips@freescale.com>
18033 Date: Wed Aug 15 22:30:33 2007 -0500
18035 mpc83xx: migrate remaining freescale boards to libfdt
18037 this adds libfdt support code for the freescale
18038 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
18041 Boards remain compatible with OF_FLAT_TREE.
18043 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18045 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
18046 Author: Kim Phillips <kim.phillips@freescale.com>
18047 Date: Wed Aug 15 22:30:26 2007 -0500
18049 mpc83xx: move common /memory node update mechanism to cpu.c
18051 also adds common prototypes to include/common.h.
18053 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18055 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
18056 Author: Kim Phillips <kim.phillips@freescale.com>
18057 Date: Wed Aug 15 22:30:19 2007 -0500
18059 mpc83xx: remaining 8360 libfdt fixes
18061 PCI clocks and QE frequencies weren't being updated, and the core clock
18062 was being updated incorrectly. This patch also adds a /memory node if
18063 it doesn't already exist prior to update.
18065 plus some cosmetic trimming to single line comments.
18067 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18069 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
18070 Author: Kim Phillips <kim.phillips@freescale.com>
18071 Date: Wed Aug 15 22:30:12 2007 -0500
18073 mpc83xx: fix UEC2->1 typo in libfdt setup code
18075 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18077 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
18078 Author: Kim Phillips <kim.phillips@freescale.com>
18079 Date: Wed Aug 15 22:30:05 2007 -0500
18081 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
18083 and reorder the existing 83xx maintainers alpha.
18085 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18087 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
18088 Author: Michal Simek <monstr@monstr.eu>
18089 Date: Wed Aug 15 21:15:05 2007 +0200
18091 [FIX] Resolve problem with warnings
18092 microblaze toolchain don't support PRAGMA PACK.
18094 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
18095 Author: Michal Simek <monstr@monstr.eu>
18096 Date: Wed Aug 15 21:05:07 2007 +0200
18098 [FIX] Correction command setting for Microblaze boards
18100 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
18101 Author: Michal Simek <monstr@monstr.eu>
18102 Date: Wed Aug 15 21:03:41 2007 +0200
18104 [FIX] Correction command definition
18106 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
18107 Author: Jon Loeliger <jdl@freescale.com>
18108 Date: Wed Aug 15 11:55:35 2007 -0500
18110 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
18112 Remove a leftover in net/tftp.c while we're at it.
18114 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18116 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
18117 Author: Jon Loeliger <jdl@freescale.com>
18118 Date: Wed Aug 15 12:20:40 2007 -0500
18120 Move the MPC8641HPCN board under board/freescale.
18122 Minor path corrections needed to ensure buildability.
18124 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18126 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
18127 Author: Jon Loeliger <jdl@freescale.com>
18128 Date: Wed Aug 15 11:46:22 2007 -0500
18130 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
18132 Remove a leftover in net/tftp.c while we're at it.
18134 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18136 commit 210f463c71917b7a4495c2103c228b9c179ae64d
18137 Author: Jerry Van Baren <gvb.uboot@gmail.com>
18138 Date: Wed Aug 15 11:13:15 2007 -0400
18140 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
18142 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
18143 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
18144 when it should have gone inside of the conditional. As a result, it
18145 broke non-LIBFDT board builds.
18147 Also added a missing "not." to the comment.
18149 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18151 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
18152 Author: Niklaus Giger <niklaus.giger@netstal.com>
18153 Date: Wed Aug 15 12:14:23 2007 +0200
18155 PPC4xx:HCU4/5-Board fix compile warning
18157 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
18159 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
18160 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18161 Date: Tue Aug 14 14:06:45 2007 -0500
18163 Fix malloc size error in ahci_init_one.
18165 Typically this causes scsi init to corrupt the
18166 devlist and break the coninfo command.
18167 Fix a compiler size warning.
18169 Signed-off-by: Jason Jin <jason.jin@freescale.com>
18170 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18171 Acked-by: Andy Fleming <afleming@freescale.com>
18173 commit b361acd64fd2525c081b9b288b0804efe209c0e9
18174 Author: ksi@koi8.net <ksi@koi8.net>
18175 Date: Tue Aug 14 10:02:16 2007 -0700
18177 TI DaVinci - fix unsupported %hhx format
18179 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
18181 commit f01dbb5424a81453c81190dd30e945891466f621
18182 Author: Wolfgang Denk <wd@denx.de>
18183 Date: Tue Aug 14 18:42:36 2007 +0200
18185 Coding style cleanup. Update CHANGELOG.
18187 Signed-off-by: Wolfgang Denk <wd@denx.de>
18189 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
18190 Author: Andy Fleming <afleming@freescale.com>
18191 Date: Tue Aug 14 10:32:59 2007 -0500
18193 Fix initrd/dtb interaction
18195 The original code would wrongly relocate the blob to be right before
18196 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
18197 if it is defined. So we make two changes:
18199 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
18201 2) If the blob is being relocated, relocate it before kbd, not initrd
18203 Signed-off-by: Andy Fleming <afleming@freescale.com>
18205 commit e54b970173769307a116bd34028b6d0c2eea2a4e
18206 Author: Peter Pearse <peter.pearse@arm.com>
18207 Date: Tue Aug 14 15:40:00 2007 +0100
18209 Supply spi interface in at45.c
18211 commit 4ce846ec59f36b85d6644a769690ad3feb667575
18212 Author: Stefan Roese <sr@denx.de>
18213 Date: Tue Aug 14 15:12:01 2007 +0200
18215 POST: Fix merge problem
18217 Signed-off-by: Stefan Roese <sr@denx.de>
18219 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
18220 Author: Stefan Roese <sr@denx.de>
18221 Date: Tue Aug 14 15:03:17 2007 +0200
18223 Coding style cleanup
18225 Signed-off-by: Stefan Roese <sr@denx.de>
18227 commit 779e975117a75e91fcebe226a63104dbfb924ab1
18228 Author: Stefan Roese <sr@denx.de>
18229 Date: Tue Aug 14 14:44:41 2007 +0200
18231 ppc4xx: Add initial Zeus (PPC405EP) board support
18233 Signed-off-by: Stefan Roese <sr@denx.de>
18235 commit c5a172a5fd636c12467429e3f7910e53773979c6
18236 Author: Stefan Roese <sr@denx.de>
18237 Date: Tue Aug 14 14:41:55 2007 +0200
18239 POST: Add option for external ethernet loopback test
18241 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
18242 is not done using an internal loopback connection, but by assuming
18243 that an external loopback connector is plugged into the board.
18245 Signed-off-by: Stefan Roese <sr@denx.de>
18247 commit eb2b4010ae426245172988804ee8d9193fb41038
18248 Author: Stefan Roese <sr@denx.de>
18249 Date: Tue Aug 14 14:39:44 2007 +0200
18251 POST: Add ppc405 support to cache and UART POST
18253 Signed-off-by: Stefan Roese <sr@denx.de>
18255 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
18256 Author: Peter Pearse <peter.pearse@arm.com>
18257 Date: Tue Aug 14 10:46:32 2007 +0100
18259 Replace lost end of at45.c.
18261 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
18262 Author: Peter Pearse <peter.pearse@arm.com>
18263 Date: Tue Aug 14 10:30:06 2007 +0100
18265 Update Makefiles for merged and split at45.c.
18267 commit 3454cece2db57cb9eb7087995f7e73066a163f71
18268 Author: Peter Pearse <peter.pearse@arm.com>
18269 Date: Tue Aug 14 10:21:06 2007 +0100
18271 Delete the merged files.
18273 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
18274 Author: Peter Pearse <peter.pearse@arm.com>
18275 Date: Tue Aug 14 10:14:05 2007 +0100
18279 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
18280 Author: Peter Pearse <peter.pearse@arm.com>
18281 Date: Tue Aug 14 10:10:52 2007 +0100
18283 Add MACH_TYPE records for several AT91 boards.
18284 Merge to two at45.c files into a common file, split to at45.c and spi.c
18285 Fix spelling error in DM9161 PHY Support.
18286 Initialize at91rm9200 board (and set LED).
18287 Add PIO control for at91rm9200dk LEDs and Mux.
18288 Change dataflash partition boundaries to be compatible with Linux 2.6.
18290 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
18291 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
18293 commit 4ef35e53c693556c54b0c22d6f873de87bade253
18294 Author: Wolfgang Denk <wd@denx.de>
18295 Date: Tue Aug 14 09:54:46 2007 +0200
18297 Coding style cleanup, update CHANGELOG
18299 Signed-off-by: Wolfgang Denk <wd@denx.de>
18301 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
18302 Author: Wolfgang Denk <wd@denx.de>
18303 Date: Tue Aug 14 09:47:27 2007 +0200
18305 Coding style cleanup; rebuild CHANGELOG
18307 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
18308 Author: Randy Vinson <rvinson@linuxbox.(none)>
18309 Date: Tue Feb 27 19:42:22 2007 -0700
18311 85xxCDS: Add make targets for legacy systems.
18313 The PCI ID select values on the Arcadia main board differ depending
18314 on the version of the hardware. The standard configuration supports
18315 Rev 3.1. The legacy target supports Rev 2.x.
18317 Signed-off-by Randy Vinson <rvinson@mvista.com>
18319 commit e41094c7e38177c755fbd9b182018069614f080d
18320 Author: Andy Fleming <afleming@freescale.com>
18321 Date: Tue Aug 14 01:50:09 2007 -0500
18323 85xxCDS: Enable the VIA PCI-to-ISA bridge.
18325 Author: Randy Vinson <rvinson@linuxbox.(none)>
18327 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
18328 Arcadia main board.
18330 Signed-off-by: Randy Vinson <rvinson@mvista.com>
18331 Signed-off-by: York Sun <yorksun@freescale.com>
18333 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
18334 Author: Andy Fleming <afleming@freescale.com>
18335 Date: Tue Aug 14 00:14:25 2007 -0500
18337 Add support for UEC to 8568
18339 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
18340 Signed-off-by: Andy Fleming <afleming@freescale.com>
18342 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
18343 Author: Haiying Wang <Haiying.Wang@freescale.com>
18344 Date: Tue Jun 19 14:18:34 2007 -0400
18346 Add PCI support for MPC8568MDS board
18348 This patch is against u-boot-mpc85xx.git of www.denx.com
18350 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
18351 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
18353 commit d111d6382c99fdea08c2312eeeae8786945e189a
18354 Author: Haiying Wang <Haiying.Wang@freescale.com>
18355 Date: Tue Jun 19 14:18:32 2007 -0400
18357 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
18359 This patch is against u-boot-mpc85xx.git of www.denx.com
18361 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
18362 both MPC8548CDS board and MPC8568MDS board, especially for supporting
18365 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
18366 DDR2 on all current board versions especially ver 1.92 or later to bring
18369 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
18371 commit 3db0bef59eab1155801618cef5c481e97553b597
18372 Author: Kumar Gala <galak@kernel.crashing.org>
18373 Date: Tue Aug 7 18:07:27 2007 -0500
18375 Use an absolute address when jumping out of 4k boot page
18377 On e500 when we leave the 4k boot page we should use an absolute address since
18378 we don't know where the board code may want us to be really running at.
18380 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18382 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
18383 Author: Andy Fleming <afleming@freescale.com>
18384 Date: Mon Aug 13 14:49:59 2007 -0500
18386 MPC85xx BA bits not set for 3-bit bank address DIMM
18388 The current implementation does not set the number of bank address bits
18389 (BA) in the processor. The default assumes 2 logical bank bits. This
18390 works fine for a DIMM that uses devices with 4 internal banks (SPD
18391 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
18392 devices with 8 internal banks (SPD byte17 = 0x8).
18394 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
18396 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
18397 Author: Andy Fleming <afleming@freescale.com>
18398 Date: Mon Aug 13 14:38:06 2007 -0500
18400 Fix minor 85xx warnings
18402 Some patches had inserted warnings into the build:
18403 * mpc8560ads declared data without using it
18404 * cpu_init declared ecm and immap without using it in all CONFIGs
18405 * MPC8548CDS.h had its default filenames changed so that they contained
18406 "\m" in the paths. Made the defaults not Windows-specific (or
18409 Signed-off-by: Andy Fleming <afleming@freescale.com>
18411 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
18412 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18413 Date: Fri Jul 27 01:50:52 2007 -0500
18415 8548cds PCIE support.
18417 Make the early L1 cache stack region guarded to prevent speculative
18418 fetches outside the locked range.
18420 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
18421 init.S whitespace cleanup.
18423 Allow TEXT_BASE value to be specified on command line. This allows it
18424 to be set to 0xfffc0000 which cuts the uboot binary in half.
18426 Clear and enable lbc and ecm errors.
18428 Update last_busno in device-tree for pci and pcie.
18430 Remove load of obsolete cpu/mpc85xx/pci.0
18432 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18433 Acked-by: Andy Fleming <afleming@freescale.com>
18435 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
18436 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18437 Date: Fri Jul 27 01:50:51 2007 -0500
18439 8544ds PCIE support
18441 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
18443 Enable LBC and ECM errors and clear error registers.
18445 Add tftpflash env var to get uboot from tftp server and flash it.
18447 Add pci/pcie convenience env vars to display register space:
18448 "run pcie3regs" to see all pcie3 ccsr registers
18449 "run pcie3cfg" to see all cfg registers
18450 Whitespace cleanup and MPC8544DS.h
18452 Enable CONFIG_INTERRUPTS.
18454 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18455 Acked-by: Andy Fleming <afleming@freescale.com>
18457 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
18458 Author: Andy Fleming <afleming@freescale.com>
18459 Date: Tue Aug 14 01:34:21 2007 -0500
18461 85xx start.S cleanup and exception support
18463 From: Ed Swarthout <Ed.Swarthout@freescale.com>
18465 Support external interrupts from platform to eliminate system hangs.
18466 Define CONFIG_INTERRUPTS board configure option to enable.
18467 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
18469 Remove extra cpu initialization redundant with hardware initialization.
18470 Whitespace cleanup.
18472 Define and use _START_OFFSET consistent with other processors using
18475 Move additional code from .text to boot page to make room for
18476 exception vectors at start of image.
18478 Handle Machine Check, External and Critical exceptions.
18480 Fix e500 machine check error determination in traps.c
18482 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
18484 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18485 Acked-by: Andy Fleming <afleming@freescale.com>
18487 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
18488 Author: Andy Fleming <afleming@freescale.com>
18489 Date: Tue Aug 14 01:33:18 2007 -0500
18491 Add MPC8544DS README
18493 Signed-off-by: Andy Fleming <afleming@freescale.com>
18495 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
18496 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18497 Date: Fri Jul 27 01:50:48 2007 -0500
18499 85xx allow debugger to configure ddr.
18501 Only check for mpc8548 rev 1 when compiled for 8548.
18503 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18504 Acked-by: Andy Fleming <afleming@freescale.com>
18506 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
18507 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18508 Date: Fri Jul 27 01:50:47 2007 -0500
18510 mpc85xx L2 cache reporting and SRAM relocation option.
18512 Allow debugger to override flash cs0/cs1 settings to enable alternate
18515 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18516 Acked-by: Andy Fleming <afleming@freescale.com>
18518 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
18519 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
18520 Date: Fri Jul 27 01:50:46 2007 -0500
18522 e500 needs ppc_asm.tmp MCK_EXCEPTION
18524 Always define MCK_EXCEPTION macro - so e500 can use it too.
18526 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
18527 Acked-by: Andy Fleming <afleming@freescale.com>
18529 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
18530 Author: David Updegraff <dave@cray.com>
18531 Date: Mon Jun 11 10:41:07 2007 -0500
18533 multicast tftp: RFC2090
18535 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
18536 on Realtek RTL8139 and Freescale TSEC.
18538 Signed-off-by: David Updegraff <dave@cray.com>
18539 Signed-off-by: Ben Warren <bwarren@qstreams.com>
18541 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
18542 Author: Wilson Callan <wcallan@savantav.com>
18543 Date: Sat Jul 28 10:56:13 2007 -0400
18545 New CONFIG_BOOTP_SERVERIP option
18547 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
18548 from the bootp server
18550 Signed-off-by: Wilson Callan <wcallan@savantav.com>
18551 Signed-off-by: Ben Warren <bwarren@qstreams.com>
18553 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
18554 Author: Mike Rapoport <mike@compulab.co.il>
18555 Date: Sun Aug 12 08:48:27 2007 +0300
18557 Add ability to take MAC address from the environment to DM9000 driver
18559 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
18560 Signed-off-by: Ben Warren <bwarren@qstreams.com>
18562 commit be5d72d10d47609326226225181e301fb9a33b58
18563 Author: Wolfgang Denk <wd@denx.de>
18564 Date: Mon Aug 13 21:57:53 2007 +0200
18566 Minor coding style cleanup. Update CHANGELOG.
18568 Signed-off-by: Wolfgang Denk <wd@denx.de>
18570 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
18571 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
18572 Date: Sat Aug 11 06:54:58 2007 -0500
18574 Modify SBC8641D to use new Freescale PCI routines
18576 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
18579 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
18580 Signde-off-by: Jon Loeliger <jdl@freescale.com>
18582 commit a08458303e7f9db67f296980036d3292c35cb45c
18583 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18584 Date: Fri Jun 29 18:38:51 2007 +0200
18586 atmel_mci: Fix data timeout value
18588 Calculate the data timeout based on values from the CSD instead of
18589 just using a hardcoded DTOR value. This is a backport of a similar fix
18590 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
18593 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18595 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
18596 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18597 Date: Mon Aug 13 17:22:31 2007 +0200
18599 AVR32: Include <div64.h> instead of <asm/div64.h>
18601 include/asm-avr32/div64.h was recently moved to include/div64.h, but
18602 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
18603 the patch was merged perhaps?)
18605 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
18608 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18610 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
18611 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
18612 Date: Wed Jun 27 13:34:26 2007 +0200
18614 atmel_mci: Use 512 byte blocksize if possible
18616 Instead of always using the largest blocksize the card supports, check
18617 if it can support smaller block sizes and use 512 bytes if possible.
18618 Most cards do support this, and other parts of u-boot seem to have
18619 trouble with block sizes different from 512 bytes.
18621 Also enable underrun/overrun protection.
18623 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
18624 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
18626 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
18627 Author: Stefan Roese <sr@denx.de>
18628 Date: Mon Aug 13 09:05:33 2007 +0200
18630 ppc4xx: Fix problem in PLL clock calculation
18632 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
18633 and fixes a bug in the PLL clock calculation.
18635 Signed-off-by: Stefan Roese <sr@denx.de>
18637 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
18638 Author: Wolfgang Denk <wd@denx.de>
18639 Date: Sun Aug 12 21:34:50 2007 +0200
18643 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
18644 Author: Wolfgang Denk <wd@denx.de>
18645 Date: Sun Aug 12 21:34:34 2007 +0200
18647 Minor alignment of output, 2nd try.
18648 Also update CHANGELOG
18650 Signed-off-by: Wolfgang Denk <wd@denx.de>
18652 commit 6b309f22a724fad8418e811751a0741b893419cf
18653 Author: Wolfgang Denk <wd@denx.de>
18654 Date: Sun Aug 12 20:35:49 2007 +0200
18656 Minor alignment of output
18658 Signed-off-by: Wolfgang Denk <wd@denx.de>
18660 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
18661 Author: Wolfgang Denk <wd@denx.de>
18662 Date: Sun Aug 12 18:28:18 2007 +0200
18664 Cleanup output on ADS5121 board
18666 Signed-off-by: Wolfgang Denk
18668 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
18669 Author: Wolfgang Denk <wd@denx.de>
18670 Date: Sun Aug 12 15:11:38 2007 +0200
18672 Adapt board configuration and fix kernel crash on MCC200 board.
18674 The update procedure was modified to turn off the USB subsystem
18675 before exit for MCC200 and TRAB. This is necessary as otherwise the
18676 USB controller continues to write periodically to system memory!
18678 MCC200-specific notes:
18679 - the patch disables the magic key check for MCC200
18680 - the patch contains the configuration changes made
18681 for the new revision of the board.
18683 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18684 Signed-off-by: Wolfgang Denk <wd@denx.de>
18686 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
18687 Author: Wolfgang Denk <wd@denx.de>
18688 Date: Sun Aug 12 14:47:54 2007 +0200
18690 Adjust default configuration of ADS5121 board.
18692 Signed-off-by: Wolfgang Denk <wd@denx.de>
18694 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
18695 Author: Wolfgang Denk <wd@denx.de>
18696 Date: Sun Aug 12 14:27:39 2007 +0200
18698 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
18700 Signed-off-by: Wolfgang Denk <wd@denx.de>
18702 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
18703 Author: Gerald Van Baren <vanbaren@cideas.com>
18704 Date: Tue Aug 7 21:14:22 2007 -0400
18706 Improve error print messages.
18708 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18710 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
18711 Author: Kim Phillips <kim.phillips@freescale.com>
18712 Date: Tue Jul 17 13:57:04 2007 -0500
18714 fdt: allow for builds that don't want env and bd_t nodes
18716 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
18719 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18721 commit 91148bf7aeba142d6f348805db7625db7da64d6f
18722 Author: Kim Phillips <kim.phillips@freescale.com>
18723 Date: Tue Jul 17 13:56:53 2007 -0500
18725 fdt: do board setup based on fdt address specified on bootm line
18727 The last fdt patch to bootm did board setup based on the address
18728 specified by a prior fdt address command invocation. The bootm
18729 code, as its call to fdt_chosen does, should use the fdt specified
18730 by the user on the bootm command. Note this restores full
18731 functionality for the 8360's existing default boot environment
18732 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
18733 before booting a kernel).
18735 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18737 commit e125a2ffc209dd34794e326c7175658253beadf3
18738 Author: Gerald Van Baren <vanbaren@cideas.com>
18739 Date: Tue Jul 10 20:40:39 2007 -0400
18741 Call ft_board_setup() from the bootm command.
18743 In the patch titled "Create new fdt boardsetup command..." I removed the
18744 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
18745 to add a direct call back into cmd_bootm.c
18747 This fixes the oversight by adding the direct call to the bootm command.
18749 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18751 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
18752 Author: Gerald Van Baren <vanbaren@cideas.com>
18753 Date: Mon Jun 25 23:25:28 2007 -0400
18755 Create new fdt boardsetup command, fix bug parsing [] form of set values.
18757 Previously ft_board_setup() was called by fdt_chosen() which was not
18758 really correctly structured. This splits ft_board_setup() out by creating
18759 a new fdt boardsetup command.
18761 Fix a bug when parsing fdt set command values which have the square
18762 bracket form [00 11 22 33] - the length was updated incorrectly in when
18765 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18767 commit 6f35ded9e85493595e0eb66a82b502a95326d049
18768 Author: Gerald Van Baren <vanbaren@cideas.com>
18769 Date: Mon Jun 25 20:55:58 2007 -0400
18771 Tighten up the error messages.
18773 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18775 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
18776 Author: Gerald Van Baren <vanbaren@cideas.com>
18777 Date: Mon Jun 25 19:52:23 2007 -0400
18779 Asthetic improvements: error messages and line lengths.
18781 Tighten up the error messages, split overlength lines.
18783 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18785 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
18786 Author: Gerald Van Baren <vanbaren@cideas.com>
18787 Date: Fri May 25 22:08:57 2007 -0400
18789 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
18791 The fdt_chosen() function was adding/seting some properties ad-hoc
18792 improperly and duplicated (poorly) what was done in ft_board_setup()
18794 Clean up long lines (setting properties, printing errors).
18796 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18798 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
18799 Author: Gerald Van Baren <vanbaren@cideas.com>
18800 Date: Mon May 21 23:27:16 2007 -0400
18802 For fdt_find_node_by_path(), handle the root path properly.
18804 Also removes the special case root path detection in cmd_fdt.c since it
18805 is no longer necessary.
18807 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18809 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
18810 Author: Gerald Van Baren <vanbaren@cideas.com>
18811 Date: Thu May 17 23:54:36 2007 -0400
18813 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
18815 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
18816 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
18818 commit 1a861169bc3758f9de3aead62b058736c6891246
18819 Author: Gerald Van Baren <vanbaren@cideas.com>
18820 Date: Wed Jun 6 22:47:58 2007 -0400
18822 Replace fdt_node_offset() with fdt_find_node_by_path().
18824 The new name matches more closely the kernel's name, which is also
18825 a much better description.
18827 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
18828 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
18830 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
18831 Author: Gerald Van Baren <vanbaren@cideas.com>
18832 Date: Wed May 16 22:39:59 2007 -0400
18834 Fix cmd_fdt line lengths, refactor code.
18836 Break lines that were greater than 80 characters in length.
18837 Move the fdt print and property parsing code to separate static functions
18838 to reduce coding clutter in the fdt_cmd handling body.
18840 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18842 commit 25114033ab21788810c48ba4df103b649da1223b
18843 Author: Gerald Van Baren <vanbaren@cideas.com>
18844 Date: Sat May 12 09:47:25 2007 -0400
18846 FDT command improvements.
18848 Fix "fdt set" so that it will create a non-existing property.
18849 Add "fdt mknode" to create nodes.
18851 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18853 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
18854 Author: Gerald Van Baren <vanbaren@cideas.com>
18855 Date: Sat May 12 09:45:46 2007 -0400
18857 Reorganize and fix problems (returns) in the bootm command.
18859 Do *NOT* return after the "point of no return" has been passed.
18860 If something goes wrong, the board must be reset after that point.
18861 Move the "Transferring control to Linux" debug message back to where it
18862 belongs: just before transferring control to linux.
18864 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18866 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
18867 Author: Gerald Van Baren <vanbaren@cideas.com>
18868 Date: Tue May 8 21:27:35 2007 -0400
18870 Fix bugs in the CONFIG_OF_LIBFDT
18872 Stupid coding mistakes (identified by Timur Tabi, thanks).
18874 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18876 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
18877 Author: Gerald Van Baren <vanbaren@cideas.com>
18878 Date: Wed Apr 25 22:47:15 2007 -0400
18880 Improve fdt move length handling.
18882 Make the length parameter optional: if not specified, do the move using
18883 the current size unchanged.
18885 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18887 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
18888 Author: Gerald Van Baren <vanbaren@cideas.com>
18889 Date: Wed Apr 25 22:23:36 2007 -0400
18891 Minor code clean up.
18893 Declare the variable fdt properly as extern.
18894 Call the "set_fn" function pointer the "short way" without the full
18895 dereferencing syntax.
18897 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18899 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
18900 Author: Gerald Van Baren <vanbaren@cideas.com>
18901 Date: Wed Apr 25 21:24:27 2007 -0400
18903 Improve error messages, more informative.
18905 Print more than the raw libfdt error message strings. This is especially
18906 useful for cluing in the user when the bootm command aborts due to
18909 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18911 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
18912 Author: Gerald Van Baren <vanbaren@cideas.com>
18913 Date: Fri Apr 20 22:46:53 2007 -0400
18915 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
18917 This is the way u-boot reduces configured-out code. At Wolfgang
18918 Grandegger and Wolfgang Denk's request, make libfdt conform.
18920 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18922 commit 923efd286411ed052d9e074f59f8986d6081061c
18923 Author: Bruce Adler <bruce.adler@ccpu.com>
18924 Date: Fri Aug 10 14:54:47 2007 -0700
18926 add image size and descriptors for Spartan 3E FPGA chips
18928 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
18930 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
18932 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
18933 Author: Kim Phillips <kim.phillips@freescale.com>
18934 Date: Fri Aug 10 15:34:48 2007 -0500
18936 make MAKEALL more immune to merge conflicts
18938 ..by placing board entries one per line, as suggested by jdl.
18940 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18942 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
18943 Author: Kim Phillips <kim.phillips@freescale.com>
18944 Date: Fri Aug 10 13:28:25 2007 -0500
18946 README: Remove outdated cpu type, board type, and NAME_config lists
18948 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18950 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
18951 Author: Dave Liu <r63238@freescale.com>
18952 Date: Fri Aug 10 15:48:59 2007 +0800
18954 mpc83xx: Suppress the warning 'burstlen'
18956 suppress the warning 'burstlen' of spd_sdram.
18958 Signed-off-by: Dave Liu <daveliu@freescale.com>
18960 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
18961 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
18962 Date: Thu Aug 9 15:11:03 2007 -0500
18964 Add support for SBC8641D. Config files.
18966 Add support for Wind River's SBC8641D reference board.
18968 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
18969 Acked-by: Wolfgang Denk <wd@denx.de>
18970 Acked-by: Jon Loeliger <jdl@freescale.com>
18972 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
18973 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
18974 Date: Thu Aug 9 15:10:53 2007 -0500
18976 Add support for SBC8641D. Board files.
18978 Add support for Wind River's SBC8641D reference board.
18980 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
18981 Acked-by: Wolfgang Denk <wd@denx.de>
18982 Acked-by: Jon Loeliger <jdl@freescale.com>
18984 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
18985 Author: Stefan Roese <sr@denx.de>
18986 Date: Fri Aug 10 20:34:58 2007 +0200
18988 Conding style cleanup
18990 Signed-off-by: Stefan Roese <sr@denx.de>
18992 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
18993 Author: Sergey Kubushyn <ksi@koi8.net>
18994 Date: Fri Aug 10 20:26:18 2007 +0200
18996 [ARM] TI DaVinci support, hopefully final
18998 Add support for the following DaVinci boards:
19005 - Split into separate board directories
19006 - Removed changes to MTD_DEBUG (or whatever it's called)
19007 - New CONFIG_CMD party line followed
19008 - Some cosmetic fixes, cleanup etc.
19009 - Patches against the latest U-Boot tree as of now.
19010 - Fixed CONFIG_CMD_NET in net files.
19011 - Fixed CONFIG_CMD_EEPROM for schmoogie.
19012 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
19013 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
19014 but it at least compiles.
19016 Here is an excerpt from session log on SCHMOOGIE...
19018 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
19027 ETH PHY : DP83848 @ 0x01
19029 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
19030 U-Boot > ping 192.168.253.10
19031 host 192.168.253.10 is alive
19034 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
19035 Acked-by: Dirk Behme <dirk.behme@gmail.com>
19036 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
19037 Acked-by: Stefan Roese <sr@denx.de>
19039 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
19040 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
19041 Date: Fri Jul 27 01:50:45 2007 -0500
19043 fsl_pci_init cleanup.
19045 Do not enable normal errors created during probe (master abort, perr,
19046 and pcie Invalid Configuration access).
19048 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
19050 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
19051 Acked-by: Andy Fleming <afleming@freescale.com>
19053 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
19054 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
19055 Date: Fri Jul 27 01:50:44 2007 -0500
19057 pciauto_setup_device bars_num fix
19059 Passing bars_num=0 to pciauto_setup_device should assign no bars.
19061 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
19062 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
19063 Acked-by: Andy Fleming <afleming@freescale.com>
19065 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
19066 Author: Jon Loeliger <jdl@freescale.com>
19067 Date: Mon Aug 6 17:39:44 2007 -0500
19069 8641hpcn: Do correct sized pointer math.
19071 When I rebased Ed's patch and cleaned up a few compilation
19072 problems, I apparently rebased my brain on crack first.
19073 Fix that by doing (char *) sized pointer math as needed.
19075 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19077 commit cfc7a7f5bb3273c9951173c788001d45118f141f
19078 Author: Jon Loeliger <jdl@freescale.com>
19079 Date: Thu Aug 2 14:42:20 2007 -0500
19083 Remove rev 1 fixes.
19084 Always set PICGCR_MODE.
19085 Enable machine check and provide board config option
19086 to set and handle SoC error interrupts.
19088 Include MSSSR0 in error message.
19090 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
19092 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
19093 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19095 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
19096 Author: Stefan Roese <sr@denx.de>
19097 Date: Fri Aug 10 10:42:25 2007 +0200
19099 Coding style cleanup
19101 Signed-off-by: Stefan Roese <sr@denx.de>
19103 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
19104 Author: Dirk Behme <dirk.behme@googlemail.com>
19105 Date: Thu Aug 2 17:42:08 2007 +0200
19107 Make use of generic 64bit division in nand_util.c
19109 Use generic 64bit division in nand_util.c. This makes nand_util.c
19110 independent of any toolchain 64bit division.
19112 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
19114 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
19115 Author: Dirk Behme <dirk.behme@googlemail.com>
19116 Date: Thu Aug 2 17:41:14 2007 +0200
19118 Move 64bit division from avr32 to generic lib
19120 Move the 64bit division from lib_avr32 to lib_generic. With this, all
19121 boards can do_div/__div64_32 if needed, not only avr one. Code is put
19122 to lib_generic, so no larger memory footprint if not used. No code
19123 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
19125 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
19127 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
19128 Author: Niklaus Giger <niklausgiger@gmx.ch>
19129 Date: Fri Jul 27 11:31:22 2007 +0200
19131 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
19133 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19135 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
19136 Author: Niklaus Giger <niklausgiger@gmx.ch>
19137 Date: Fri Jul 27 11:30:33 2007 +0200
19139 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
19141 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19143 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
19144 Author: Niklaus Giger <niklausgiger@gmx.ch>
19145 Date: Fri Jul 27 11:38:26 2007 +0200
19147 Add PPC4xx-HCU4 and HCU5 boards: common files
19149 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19151 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
19152 Author: Niklaus Giger <niklausgiger@gmx.ch>
19153 Date: Fri Jul 27 11:28:44 2007 +0200
19155 Add PPC4xx-HCU4 and HCU5 boards: make related
19157 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19159 commit 137fdd9f474ecb853efdace5200576308c67f18d
19160 Author: Niklaus Giger <niklausgiger@gmx.ch>
19161 Date: Fri Jul 27 11:28:03 2007 +0200
19163 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
19165 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19167 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
19168 Author: Niklaus Giger <niklausgiger@gmx.ch>
19169 Date: Fri Jul 27 11:27:15 2007 +0200
19171 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
19173 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19175 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
19176 Author: Niklaus Giger <niklausgiger@gmx.ch>
19177 Date: Fri Jul 27 11:25:31 2007 +0200
19179 Add PPC4xx-HCU4 and HCU5 boards: READMEs
19181 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19183 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
19184 Author: Niklaus Giger <niklausgiger@gmx.ch>
19185 Date: Fri Jul 27 11:37:40 2007 +0200
19187 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
19189 This series of patches adds support for 2 boards from Netstal Maschinen.
19191 The HCU4 has a PPC405Gpr and
19192 the HCU5 has a PPC440EPX.
19194 The HCU4 has a somehow complicated flash setup, as the booteprom is
19195 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
19198 The HCU5 has only a booteprom as the whole code will be downloaded from a
19199 different board which has HD, CD-ROM, etc and where all code is stored.
19201 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
19204 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19206 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
19207 Author: Stefan Roese <sr@denx.de>
19208 Date: Fri Aug 10 08:42:55 2007 +0200
19210 ppc4xx: Update lwmon5 POST configuration
19212 Signed-off-by: Stefan Roese <sr@denx.de>
19214 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
19215 Author: Yuri Tikhonov <yur@emcraft.com>
19216 Date: Fri Aug 10 08:25:22 2007 +0200
19218 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
19220 The patch adds support for UART POST on ppc44x-based boards with no
19221 external serial clocks installed.
19223 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19224 Acked-by: Stefan Roese <sr@denx.de>
19226 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
19227 Author: Kim Phillips <kim.phillips@freescale.com>
19228 Date: Mon Aug 6 18:18:34 2007 -0500
19230 mpc83xx: fix ITX[GP] O=builddir builds
19232 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
19234 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
19235 "BUILD_DIR=<some dir> ./MAKEALL ..."
19237 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19239 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
19240 Author: Dave Liu <r63238@freescale.com>
19241 Date: Wed Aug 1 15:00:59 2007 +0800
19243 mpc83xx: Correct the README for DDR ECC
19245 Update the README for DDR ECC, change the name
19246 to README.mpc83xx.ddrecc.
19248 Signed-off-by: Dave Liu <daveliu@freescale.com>
19249 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19251 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
19252 Author: Dave Liu <r63238@freescale.com>
19253 Date: Wed Aug 1 15:00:15 2007 +0800
19255 mpc83xx: Consolidate the ECC support of 83xx
19257 Remove the duplicated source code of ecc command on the <board>.c,
19258 for reused, move these code to cpu/mpc83xx directory.
19260 Signed-off-by: Dave Liu <daveliu@freescale.com>
19261 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19263 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
19264 Author: Dave Liu <r63238@freescale.com>
19265 Date: Sat Aug 4 13:37:39 2007 +0800
19267 mpc83xx: Correct the burst length for DDR2 with 32 bits
19269 The burst length should be 4 for DDR2 with 32 bits bus
19271 Signed-off-by: Dave Liu <daveliu@freescale.com>
19273 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
19274 Author: Kim Phillips <kim.phillips@freescale.com>
19275 Date: Wed Jul 25 19:25:33 2007 -0500
19277 mpc83xx: add support for the MPC8323E RDB
19279 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
19280 five 10/100 ethernet ports connected via an ICPlus IP175C
19281 switch, one PCI slot, and serial. Features not supported
19282 in this patch are SD card interface, 2 USB ports, and the
19285 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
19286 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19288 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
19289 Author: Kim Phillips <kim.phillips@freescale.com>
19290 Date: Wed Jul 25 19:25:28 2007 -0500
19292 mpc83xx: fixup generic pci for libfdt
19294 add libfdt support to the generic 83xx pci code
19296 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19298 commit f57ac7a7b37109245b69db80839ebee26179966a
19299 Author: Kim Phillips <kim.phillips@freescale.com>
19300 Date: Wed Jul 25 19:25:22 2007 -0500
19302 mpc83xx: fix 8360 and cpu functions to update fdt being passed
19304 ..and not the global fdt. Rename local fdt vars to blob so as not to
19305 be confused with the global var with the same three-letter name.
19307 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19309 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
19310 Author: Jerry Van Baren <gvb.uboot@gmail.com>
19311 Date: Wed Jul 4 21:34:24 2007 -0400
19313 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
19315 Several node strings were not correct (trailing slashes and properties
19317 Added setting of the timebase-frequency.
19318 Improved error messages and use debug() instead of printf().
19320 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
19321 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19323 commit 26d02c9bbac1751c5e19294f000100b48d43a920
19324 Author: Jerry Van Baren <gvb.uboot@gmail.com>
19325 Date: Wed Jul 4 21:27:30 2007 -0400
19327 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
19329 The new name matches more closely the kernel's name, which is also
19330 a much better description.
19332 These are the mpc83xx changes made necessary by the function name change.
19334 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
19335 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
19336 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19338 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
19339 Author: Dave Liu <daveliu@freescale.com>
19340 Date: Mon Jun 25 10:41:56 2007 +0800
19342 mpc83xx: Add support for the display of reset status
19344 83xx processor family has many reset sources, such as
19345 power on reset, software hard reset, software soft reset,
19346 JTAG, bus monitor, software watchdog, check stop reset,
19347 external hard reset, external software reset.
19348 sometimes, to figure out the fault of system, we need to
19349 know the cause of reset early before the prompt of
19352 Signed-off-by: Dave Liu <daveliu@freescale.com>
19353 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19355 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
19356 Author: Dave Liu <daveliu@freescale.com>
19357 Date: Mon Jun 25 10:41:04 2007 +0800
19359 mpc83xx: Fix the align bug of SDMA buffer
19361 According to the latest user manual, the SDMA temporary
19362 buffer base address must be 4KB aligned.
19364 Signed-off-by: Dave Liu <daveliu@freescale.com>
19365 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19367 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
19368 Author: Dave Liu <daveliu@freescale.com>
19369 Date: Mon Jun 25 13:21:12 2007 +0800
19371 mpc83xx: Revise the MPC8360EMDS readme doc
19373 When the rev2.x silicon mount on the MPC8360EMDS baord,
19374 and if you are using the u-boot version after the commit
19375 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
19376 to make the ethernet interface usable, we have to setup
19377 the jumpers correctly.
19379 Signed-off-by: Dave Liu <daveliu@freescale.com>
19380 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19382 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
19383 Author: Timur Tabi <timur@freescale.com>
19384 Date: Tue Jul 3 13:46:32 2007 -0500
19386 FSL I2C driver programs the two I2C busses differently
19388 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
19389 The second I2C bus has its slave address programmed incorrectly and is
19390 missing a 5-us delay.
19392 Signed-off-by: Timur Tabi <timur@freescale.com>
19393 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19395 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
19396 Author: Timur Tabi <timur@freescale.com>
19397 Date: Tue Jul 3 13:04:34 2007 -0500
19399 Update SCCR programming in cpu_init_f() to support all 83xx processors
19401 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
19402 bitfields for all 83xx processors. The code to update some bitfields was
19403 compiled only on some processors. Now, the bitfields are programmed as long
19404 as the corresponding CFG_SCCR option is defined in the board header file.
19405 This means that the board header file should not define any CFG_SCCR macros
19406 for bitfields that don't exist on that processor, otherwise the SCCR will be
19407 programmed incorrectly.
19409 Signed-off-by: Timur Tabi <timur@freescale.com>
19410 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19412 commit 9546266999f0b9b51372636614211b88d90f0f25
19413 Author: Martin Krause <martin.krause@tqs.de>
19414 Date: Fri Jun 22 13:04:22 2007 +0200
19416 TQM834x: cleanup configuraton
19418 Remove irritating #undef DEBUG
19420 Signed-off-by: Martin Krause <martin.krause@tqs.de>
19421 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19423 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
19424 Author: david.saada <David.Saada@ecitele.com>
19425 Date: Mon Jun 18 09:09:53 2007 -0700
19427 MPC83xx: Fix makefile to generate config.h file in the build directory
19429 MPC83xx: Fix the Makefile config sections to generate the include/config.h
19430 file in the build directory instead of the source directory.
19432 Signed-off-by: David Saada <david.saada@ecitele.com>
19433 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19435 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
19436 Author: Lee Nipper <Lee.Nipper@freescale.com>
19437 Date: Thu Jun 14 20:07:33 2007 -0500
19439 mpc83xx: Add support for 8360 silicon revision 2.1
19441 This change adds 8360 silicon revision 2.1 support to u-boot.
19443 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
19444 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19446 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
19447 Author: Kumar Gala <galak@kernel.crashing.org>
19448 Date: Wed Aug 8 04:14:28 2007 -0500
19450 Treat ppc64 host as ppc
19452 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19454 commit 0dc4279b08ff82472bec2e2c90858602459febe8
19455 Author: Jason Jin <Jason.jin@freescale.com>
19456 Date: Wed Aug 8 09:01:46 2007 +0800
19458 Minor fix for bios emulator makefile
19460 Add $(obj) to LIB avoiding objects be built in the source dir
19462 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19464 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
19465 Author: Jason Jin <Jason.jin@freescale.com>
19466 Date: Wed Aug 8 08:33:11 2007 +0800
19468 Add CONFIG_BIOSEMU define to guard all the bios emulator code
19470 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19472 This patch fix the compile issue on the board that did not enable the bios emulator
19474 commit ed8106433522f2ea8933e9808346860d061d7731
19475 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
19476 Date: Tue Jul 31 12:27:25 2007 -0500
19478 tsec: fix multiple PHY support
19480 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
19481 broke multiple PHY support in tsec.c. This fixes it.
19483 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
19484 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19486 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
19487 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
19488 Date: Thu Aug 9 09:08:18 2007 -0500
19490 tsec: Allow Ten Bit Interface address to be configurable
19492 Allow the address of the Ten Bit Interface (TBI) to be changed in the
19493 event of a conflict with another device.
19495 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
19497 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
19498 Author: Stefan Roese <sr@denx.de>
19499 Date: Wed Aug 8 09:54:26 2007 +0200
19501 Coding style cleanup
19503 Signed-off-by: Stefan Roese <sr@denx.de>
19505 commit a41de1f0d373e09c782dea558385a06247111ba5
19506 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19507 Date: Sun Aug 5 05:15:18 2007 -0500
19509 Port enabled for I2C signals and chipselects port configuration.
19511 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19513 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
19514 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19515 Date: Sun Aug 5 04:31:18 2007 -0500
19519 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19521 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
19522 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19523 Date: Sun Aug 5 04:11:20 2007 -0500
19527 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19529 commit 99c03c175d2689093176facf17c58ce2cb320001
19530 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19531 Date: Sun Aug 5 03:58:52 2007 -0500
19533 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
19535 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19537 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
19538 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19539 Date: Sun Aug 5 03:55:21 2007 -0500
19541 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
19543 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19545 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
19546 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19547 Date: Sun Aug 5 03:43:30 2007 -0500
19549 Moved sync() from board file to include/asm-m68k/io.h
19551 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19553 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
19554 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19555 Date: Sun Aug 5 03:30:44 2007 -0500
19557 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
19559 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19561 commit 9998bd37ead85e93953559720710d3b0685c81e6
19562 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19563 Date: Sun Aug 5 03:19:10 2007 -0500
19565 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
19567 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19569 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
19570 Author: Jason Jin <Jason.jin@freescale.com>
19571 Date: Tue Aug 7 16:17:06 2007 +0800
19573 Add CONFIG_BIOSEMU define to guard all the bios emulator code
19575 This patch fix the compile issue on the board that did not enable the bios emulator
19577 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
19578 Author: Wolfgang Denk <wd@denx.de>
19579 Date: Tue Aug 7 16:02:13 2007 +0200
19581 Fix missing brace error in fs/fat/fat.c
19582 [pointed out by Roderik Wildenburg]
19584 Signed-off-by: Wolfgang Denk <wd@denx.de>
19586 commit 706714d97a0d08d59eda4de2268c39f504688329
19587 Author: Michal Simek <monstr@monstr.eu>
19588 Date: Mon Aug 6 23:41:53 2007 +0200
19590 [FIX] remove cute code
19592 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
19593 Author: Michal Simek <monstr@monstr.eu>
19594 Date: Mon Aug 6 23:35:26 2007 +0200
19596 [FIX] Fix romfs code
19598 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
19599 Author: Michal Simek <monstr@monstr.eu>
19600 Date: Mon Aug 6 23:31:49 2007 +0200
19602 [FIX] Coding style cleanup - Wolfgang's suggestions
19604 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
19605 Author: Wolfgang Denk <wd@denx.de>
19606 Date: Mon Aug 6 23:21:05 2007 +0200
19608 Fixed typo in README (pointed out by Martin Jost).
19610 Signed-off-by: Wolfgang Denk <wd@denx.de>
19612 commit 537223afa61f64480df31ce440a9cb386df4a814
19613 Author: Stefan Roese <sr@denx.de>
19614 Date: Mon Aug 6 21:10:17 2007 +0200
19616 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
19618 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
19619 here an updated Bamboo README.
19621 Signed-off-by: Stefan Roese <sr@denx.de>
19623 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
19624 Author: Wolfgang Denk <wd@denx.de>
19625 Date: Mon Aug 6 02:17:36 2007 +0200
19627 Coding style cleanup. Update CHANGELOG.
19629 Signed-off-by: Wolfgang Denk <wd@denx.de>
19631 commit 221838cc7eb178370ff62aa05920a582e12ac322
19632 Author: Jason Jin <Jason.jin@freescale.com>
19633 Date: Tue Jul 10 09:03:22 2007 +0800
19635 Remove the bios emulator from MAI board.
19637 The bios emulator in the MAI board can not pass compile
19638 and have a lot of crap in it. remove it and will have a
19639 clean and small bios emulator in the drivers directory
19640 which can be uesed for every board.
19642 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19644 commit 5618332409bb96f4448d1712899369fc80c0b489
19645 Author: Jason Jin <Jason.jin@freescale.com>
19646 Date: Fri Jul 13 12:14:59 2007 +0800
19648 Fix some compile issues for MAI board.
19650 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19652 commit 0f460a1ee148b648ee242c3157650287d4296260
19653 Author: Jason Jin <Jason.jin@freescale.com>
19654 Date: Fri Jul 13 12:14:58 2007 +0800
19656 Configurations for ATI video card BIOS emulator
19658 This patch add definition of the BIOS emulator and the ATI framebuffer
19659 driver for MPC8641HPCN board.
19661 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19662 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
19664 commit ece92f85053b8df613edcf05b26a416cbc3d629c
19665 Author: Jason Jin <Jason.jin@freescale.com>
19666 Date: Fri Jul 6 08:34:56 2007 +0800
19668 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
19669 ATI video card BIOS. and can be used for x86 code emulation by some
19672 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19674 commit 5072188acabde3178fac7f5a597150e6e74fd40c
19675 Author: Jason Jin <Jason.jin@freescale.com>
19676 Date: Fri Jul 6 08:33:33 2007 +0800
19678 This is a framebuffer driver for ATI video card, can work for PCI9200,
19679 X300, X700, X800 ATI video cards.
19681 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
19682 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19684 commit 5728be389e65fd47f34b33c2596271eb4db751ae
19685 Author: Wolfgang Denk <wd@denx.de>
19686 Date: Mon Aug 6 01:01:49 2007 +0200
19688 Coding style cleanup. Update CHANGELOG.
19690 Signed-off-by: Wolfgang Denk <wd@denx.de>
19692 commit 8092fef4c29b395958bb649647da7e3775731517
19693 Author: Martin Krause <Martin.Krause@tqs.de>
19694 Date: Tue Dec 12 14:26:01 2006 +0100
19696 Add functions to list of exported functions
19698 Additionally export the following fuctions (to make trab_config build again):
19702 Also bump the ABI version to reflect this change
19704 Signed-off-by: Martin Krause <martin.krause@tqs.de>
19706 commit 63cec5814fab5d2b1c86982327433807a5ac0249
19707 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
19708 Date: Thu Aug 2 14:09:49 2007 -0500
19710 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
19712 All of the PCI/PCI-Express driver and initialization code that
19713 was in the MPC8641HPCN port has now been moved into the common
19714 drivers/fsl_pci_init.c. In a subsequent patch, this will be
19715 utilized by the 85xx ports as well.
19717 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
19719 Also enable the second PCI-Express controller on 8641
19720 by getting its BATS and CFG_ setup right.
19722 Fixed a u16 vendor compiler warning in AHCI driver too.
19724 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
19725 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
19726 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19728 commit a274ca4f6d68830e7c916f897561cff8c4101c38
19729 Author: Michal Simek <monstr@monstr.eu>
19730 Date: Sun Aug 5 22:33:05 2007 +0200
19732 [FIX] Coding style cleanup
19734 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
19735 Author: Michal Simek <monstr@monstr.eu>
19736 Date: Sun Aug 5 16:13:31 2007 +0200
19738 [FIX] Xilinx Uartlite driver
19739 Because PPC405 can use UARTLITE serial interface and
19740 Microblaze can use Uart16550 serial interface not only Uartlite.
19742 commit 98889edd50aadf862071eb5664747ad0d568a20e
19743 Author: Michal Simek <monstr@monstr.eu>
19744 Date: Sun Aug 5 15:54:53 2007 +0200
19746 [FIX] Change configuration for XUPV2P Microblaze board
19748 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
19749 Author: Michal Simek <monstr@monstr.eu>
19750 Date: Sun Aug 5 15:53:50 2007 +0200
19752 [PATCH] Added support for Xilinx Emac community driver
19754 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
19755 Author: Bartlomiej Sieka <tur@semihalf.com>
19756 Date: Fri Aug 3 12:08:16 2007 +0200
19758 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
19760 Add the ability for modules from the Schindler cm5200 family to use a
19761 single U-Boot image:
19762 - rename cm1_qp1 to cm5200
19763 - add run-time module detection
19764 - parametrize SDRAM configuration according to the module we are running on
19766 Few minor, board-specific fixes included in this patch:
19767 - better MAC address handling
19768 - updated default environment ('update' command uses +{filesize} now)
19769 - improved error messages in the auto-update code
19770 - allow booting U-Boot from RAM (CFG_RAMBOOT)
19772 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
19773 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
19774 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19776 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
19777 Author: Andy Fleming <afleming@freescale.com>
19778 Date: Fri Aug 3 04:05:25 2007 -0500
19780 Add Marvell 1149 PHY support to the TSEC
19782 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
19783 Author: Wolfgang Denk <wd@denx.de>
19784 Date: Thu Aug 2 21:27:46 2007 +0200
19786 Coding style cleanup, update CHANGELOG
19788 Signed-off-by: Wolfgang Denk <wd@denx.de>
19790 commit 63e22764d2f8653f68888c667eb65b3996b52680
19791 Author: Wolfgang Denk <wd@denx.de>
19792 Date: Thu Aug 2 10:11:18 2007 +0200
19794 Minor cleanup of <board>_nand build rules.
19796 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
19797 Author: Stefan Roese <sr@denx.de>
19798 Date: Thu Aug 2 08:33:56 2007 +0200
19800 ppc4xx: Code cleanup
19802 Signed-off-by: Stefan Roese <sr@denx.de>
19804 commit c92409812206ac67a7fa7aae298539a9c3804a46
19805 Author: Grzegorz Bernacki <gjb@semihalf.com>
19806 Date: Tue Jul 31 18:51:48 2007 +0200
19808 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
19810 During config transactions on the PCIe bus an attempt to scan for a
19811 non-existent device can lead to a machine check exception with certain
19812 peripheral devices. In order to avoid crashing in such scenarios the
19813 instrumented versions of the config cycle read routines are introduced, so
19814 the exceptions fixups framework can gracefully recover.
19816 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
19817 Acked-by: Rafal Jaworowski <raj@semihalf.com>
19819 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
19820 Author: Rafal Jaworowski <raj@semihalf.com>
19821 Date: Tue Jul 31 18:19:54 2007 +0200
19823 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
19825 This brings back separate settings for PCIe bus numbers depending on chip
19826 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
19827 commit. 440SPe rev. A does NOT work properly with the same settings as for
19828 the rev. B (no devices are seen on the bus during enumeration).
19830 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
19832 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
19833 Author: Wolfgang Denk <wd@denx.de>
19834 Date: Thu Aug 2 00:48:45 2007 +0200
19836 Fix build errors and warnings / code cleanup.
19838 Signed-off-by: Wolfgang Denk <wd@denx.de>
19840 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
19841 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
19842 Date: Tue Jul 31 10:24:56 2007 +0200
19844 ppc4xx: Update AMCC Bamboo 440EP support
19846 Changed storage type of cfg_simulate_spd_eeprom to const
19847 Changed storage type of gpio_tab to stack storage
19848 (Cannot access global data declarations in .bss until afer code relocation)
19850 Improved SDRAM tests to catch problems where data is not uniquely addressable
19851 (e.g. incorrectly programmed SDRAM row or columns)
19853 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
19854 Fixed AM29LV320DT (OpCode Flash) sector map
19856 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
19857 Signed-off-by: Stefan Roese <sr@denx.de>
19859 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
19860 Author: Stefan Roese <sr@denx.de>
19861 Date: Tue Jul 31 08:37:01 2007 +0200
19863 ppc4xx: Update 440EPx lwmon5 board support
19865 - Clear ECC status regs after ECC POST test
19866 - Set dcbz for ECC generation with caches enabled as default
19869 Signed-off-by: Stefan Roese <sr@denx.de>
19871 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
19872 Author: Stefan Roese <sr@denx.de>
19873 Date: Mon Jul 30 11:04:57 2007 +0200
19875 ppc4xx: Only print ECC related info when the error bis are set
19877 Signed-off-by: Stefan Roese <sr@denx.de>
19879 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
19880 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19881 Date: Fri Jul 27 16:44:31 2007 +0200
19883 new FPGA image for PLU405 board
19885 new FPGA image for PLU405 board with improved CompactFlash timing
19887 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19889 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
19890 Author: Rafal Jaworowski <raj@semihalf.com>
19891 Date: Fri Jul 27 14:43:59 2007 +0200
19893 [ADS5121] Support for the ADS5121 board
19895 The following MPC5121e subsystems are supported:
19897 - low-level CPU init
19898 - NOR Boot Flash (common CFI driver)
19904 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
19905 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
19906 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
19908 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
19909 Author: Rafal Jaworowski <raj@semihalf.com>
19910 Date: Fri Jul 27 14:22:04 2007 +0200
19912 [PPC] Remove unused MSR_USER definition
19914 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
19916 commit d4024bb72dd81695ec099b2199eda0d27c623e62
19917 Author: John Otken <john@softadvances.com>
19918 Date: Thu Jul 26 17:49:11 2007 +0200
19920 ppc4xx: Add support for AMCC 405EP Taihu board
19922 Signed-off-by: John Otken <john@softadvances.com>
19924 commit b66091de6c7390620312c2501db23d8391e7cabb
19925 Author: Anatolij Gustschin <agust@denx.de>
19926 Date: Thu Jul 26 15:08:01 2007 +0200
19928 ppc4xx: lwmon5: Update Lime initialization
19930 Change Lime SDRAM initialization to now support 100MHz and
19931 133MHz (if enabled). Also the framebuffer is initialized to
19932 display a blue rectangle with a white border.
19934 Signed-off-by: Anatolij Gustschin <agust@denx.de>
19935 Signed-off-by: Stefan Roese <sr@denx.de>
19937 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
19938 Author: Stefan Roese <sr@denx.de>
19939 Date: Tue Jul 24 09:52:52 2007 +0200
19941 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
19943 The used Intel NOR FLASH chips have internally two dies, and are now
19944 treated as two seperate chips.
19946 Signed-off-by: Stefan Roese <sr@denx.de>
19948 commit aedf5bde179ecfbd0a96130d18996a96518b785f
19949 Author: Stefan Roese <sr@denx.de>
19950 Date: Tue Jul 24 07:20:09 2007 +0200
19952 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
19954 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
19955 interrupt controller.
19957 Signed-off-by: Stefan Roese <sr@denx.de>
19959 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
19960 Author: Stefan Roese <sr@denx.de>
19961 Date: Fri Jul 20 15:03:44 2007 +0200
19963 ppc4xx: Fix bug with default GPIO output value
19965 As spotted by Matthias Fuchs, the default output values for all GPIO1
19966 outputs were not setup correctly. This patch fixes this issue.
19968 Signed-off-by: Stefan Roese <sr@denx.de>
19970 commit 531e3e8b831f357056448fa573137d5fb37000fd
19971 Author: Pavel Kolesnikov <concord@emcraft.com>
19972 Date: Fri Jul 20 15:03:03 2007 +0200
19974 POST: Add ECC POST for the lwmon5 board
19976 This patch adds ECC Post test for the Lwmon5 board based
19977 on PPC440EPx to U-Boot.
19979 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
19980 Acked-by: Yuri Tikhonov <yur@emcraft.com>
19981 Acked-by: Stefan Roese <sr@denx.de>
19983 commit cc3023b9f95d7ac959a764471a65001062aecf41
19984 Author: Rafal Jaworowski <raj@semihalf.com>
19985 Date: Thu Jul 19 17:12:28 2007 +0200
19987 Fix breakage of 8xx boards from recent commit.
19989 This patch fixes the negative consequences for 8xx of the recent
19990 "ppc4xx: Clean up 440 exceptions handling" commit.
19992 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
19994 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
19995 Author: Stefan Roese <sr@denx.de>
19996 Date: Mon Jul 16 13:11:12 2007 +0200
19998 Coding style cleanup
20000 Signed-off-by: Stefan Roese <sr@denx.de>
20002 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
20003 Author: Stefan Roese <sr@denx.de>
20004 Date: Mon Jul 16 10:02:12 2007 +0200
20006 ppc4xx: Code cleanup
20008 Signed-off-by: Stefan Roese <sr@denx.de>
20010 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
20011 Author: Stefan Roese <sr@denx.de>
20012 Date: Mon Jul 16 10:01:38 2007 +0200
20014 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
20016 Signed-off-by: Stefan Roese <sr@denx.de>
20018 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
20019 Author: Stefan Roese <sr@denx.de>
20020 Date: Mon Jul 16 10:00:43 2007 +0200
20022 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
20024 The new boardspecific DDR2 controller configuration is used for the Yucca
20025 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
20027 Signed-off-by: Stefan Roese <sr@denx.de>
20029 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
20030 Author: Stefan Roese <sr@denx.de>
20031 Date: Mon Jul 16 09:57:00 2007 +0200
20033 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
20035 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
20036 support non default, boardspecific DDR(2) controller configuration.
20038 Signed-off-by: Stefan Roese <sr@denx.de>
20040 commit 5743a9207a370b90f09b20ebd61167c806b937f3
20041 Author: Stefan Roese <sr@denx.de>
20042 Date: Mon Jul 16 08:53:51 2007 +0200
20044 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
20046 The new function remove_tlb() can be used to remove the TLB's used to
20047 map a specific memory region. This is especially useful for the DDR(2)
20048 setup routines which configure the SDRAM area temporarily as a cached
20049 area (for speedup on auto-calibration and ECC generation) and later
20050 need this area uncached for normal usage.
20052 Signed-off-by: Stefan Roese <sr@denx.de>
20054 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
20055 Author: Michal Simek <monstr@monstr.eu>
20056 Date: Mon Jul 16 00:31:07 2007 +0200
20058 [PATCH] Support for Xilinx EmacLite controller
20060 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
20061 Author: Wolfgang Denk <wd@denx.de>
20062 Date: Sat Jul 14 22:51:02 2007 +0200
20066 Signed-off-by: Wolfgang Denk <wd@denx.de>
20068 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
20069 Author: Michal Simek <monstr@monstr.eu>
20070 Date: Sat Jul 14 13:11:28 2007 +0200
20072 [FIX] support for simply measuring time
20074 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
20075 Author: Michal Simek <monstr@monstr.eu>
20076 Date: Sat Jul 14 12:41:23 2007 +0200
20078 [FS] Added support for ROMFS
20080 commit 011595307731a7a67a7445d107c279d031e8ab97
20081 Author: Heiko Schocher <hs@pollux.denx.de>
20082 Date: Sat Jul 14 01:06:58 2007 +0200
20084 [PCS440EP] - fix compile error, if BUILD_DIR is used
20086 commit 5a2f1098d81ad58b309e5e558d0492643166a799
20087 Author: Michal Simek <monstr@monstr.eu>
20088 Date: Sat Jul 14 00:18:48 2007 +0200
20090 [PATCH] Support time without timer
20092 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
20093 Author: Michal Simek <monstr@monstr.eu>
20094 Date: Fri Jul 13 21:43:55 2007 +0200
20096 [PATCH] Remove problem with disabled BARREL SHIFTER
20098 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
20099 Author: Michal Simek <monstr@monstr.eu>
20100 Date: Fri Jul 13 21:41:44 2007 +0200
20102 [FIX] correct help for rspr
20104 commit fad63407154f46246ce80d53a9c669a44362ac67
20105 Author: Heiko Schocher <hs@pollux.denx.de>
20106 Date: Fri Jul 13 09:54:17 2007 +0200
20108 make show_boot_progress () weak.
20110 Signed-off-by: Heiko Schocher <hs@denx.de>
20112 commit 907902472391b6ca1876ec300687562ecaf459b1
20113 Author: Heiko Schocher <hs@pollux.denx.de>
20114 Date: Fri Jul 13 08:26:05 2007 +0200
20116 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
20117 - fix compile error, if BUILD_DIR is used
20119 Signed-off-by: Heiko Schocher <hs@denx.de>
20121 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
20122 Author: Stefan Roese <sr@denx.de>
20123 Date: Thu Jul 12 16:32:08 2007 +0200
20125 ppc4xx: Change receive buffer handling in the 4xx emac driver
20127 This change fixes a bug in the receive buffer handling, that
20128 could lead to problems upon high network traffic (broadcasts...).
20130 Signed-off-by: Stefan Roese <sr@denx.de>
20132 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
20133 Author: Wolfgang Denk <wd@denx.de>
20134 Date: Thu Jul 12 01:45:34 2007 +0200
20136 Update CHANGELOG, minor coding style cleanup.
20138 Signed-off-by: Wolfgang Denk <wd@denx.de>
20140 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
20141 Author: Andy Fleming <afleming@freescale.com>
20142 Date: Fri Jun 8 16:41:18 2007 -0500
20144 Remove erroneous errata code from Marvel 88E1111S driver
20146 The Marvel 88E1111S driver for the TSEC was copied from the
20147 88E1101 driver, and included a fix for an erratum which does not
20148 exist on that part. Now it is removed
20150 Signed-off-by: Andy Fleming <afleming@freescale.com>
20152 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
20153 Author: Andy Fleming <afleming@freescale.com>
20154 Date: Tue Jun 5 16:38:44 2007 -0500
20156 From: eran liberty <eran.liberty@gmail.com>
20158 adds the reset register to 85xx immap
20160 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
20161 Signed-off-by: Andy Fleming <afleming@freescale.com>
20163 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
20164 Author: Andy Fleming <afleming@freescale.com>
20165 Date: Thu May 10 17:50:01 2007 -0500
20167 Polished the 85xx ADS config files
20169 Made the boot commands use device trees by default.
20170 Also moved the ramdisk to 1000000 (I think the previous address
20171 was getting overridden during boot).
20173 Signed-off-by: Andy Fleming <afleming@freescale.com>
20175 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
20176 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
20177 Date: Wed May 9 11:03:32 2007 -0500
20179 8544ds: Fix Makefile after moving pixis to board/freescale.
20181 The OBJTREE != SRCTREE build scenario was broken.
20184 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20185 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20187 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
20188 Author: Andy Fleming <afleming@freescale.com>
20189 Date: Wed May 9 00:54:20 2007 -0500
20191 tsec: Fix PHY code to match first driver
20193 Jarrold Wen noticed that the generic PHY code always matches
20194 under the current implementation. Change it so the first match
20195 wins, and *only* unknown PHYs trigger the generic driver
20197 Signed-off-by: Andy Fleming <afleming@freescale.com>
20199 commit ccc091aac61a38cd998d575d92f7232e256d6312
20200 Author: Andy Fleming <afleming@freescale.com>
20201 Date: Tue May 8 17:27:43 2007 -0500
20203 Add support for CPM device tree configuration to 8560 ADS
20205 * Adds code to modify CPM frequencies
20206 * Cleans up the config file to #define TSEC and (for now) #undef FCC
20207 * Adds the MII command for all 8560 ADS configurations
20208 * Updates config file to provide convenience commands for booting
20211 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
20212 Signed-off-by: Andy Fleming <afleming@freescale.com>
20214 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
20215 Author: Andy Fleming <afleming@freescale.com>
20216 Date: Tue May 8 17:23:02 2007 -0500
20218 Fix Marvell 88e1145 PHY init code
20220 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
20221 where the reset was being done after the errata code instead of
20224 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
20225 Signed-off-by: Andy Fleming <afleming@freescale.com>
20227 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
20228 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
20229 Date: Wed Jul 11 14:52:16 2007 -0500
20231 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
20233 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20235 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
20236 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
20237 Date: Wed Jul 11 14:52:08 2007 -0500
20239 pciauto setup bridge
20241 The P2P bridge bus numbers programmed into the device are relative to
20244 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20246 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
20247 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
20248 Date: Wed Jul 11 14:52:01 2007 -0500
20250 Support PCIe extended config registers
20252 FSL PCIe block has extended cfg registers in the 100 and 400 range.
20253 For example, to read the LTSSM register: pci display <busn>.0 404 1
20255 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20257 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
20258 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
20259 Date: Wed Jul 11 14:51:48 2007 -0500
20261 Minor improvements to drivers/pci_auto.c
20263 - Make pciauto_{pre,post}scan_setup_bridge non-static
20264 - Added physical address display in debug messages.
20266 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20268 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
20269 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
20270 Date: Wed Jul 11 14:51:35 2007 -0500
20272 Start pci hose scan from hose->current_busno.
20274 Ensure hose->current_busno is not less than first_busno. This fixes
20275 broken board code which leaves current_busno=0 when first_busno is
20276 greater than 0 for the cases with multiple controllers.
20278 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20280 commit 3865b1fb7843a08ad49a6319a36415752276ff48
20281 Author: Stefan Roese <sr@denx.de>
20282 Date: Wed Jul 11 12:13:53 2007 +0200
20284 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
20286 Signed-off-by: Stefan Roese <sr@denx.de>
20288 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
20289 Author: Bartlomiej Sieka <tur@semihalf.com>
20290 Date: Wed Jul 11 20:11:07 2007 +0200
20292 CM1.QP1: Support for the Schindler CM1.QP1 board.
20294 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
20295 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20297 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
20298 Author: Heiko Schocher <hs@pollux.denx.de>
20299 Date: Wed Jul 11 18:39:11 2007 +0200
20301 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
20302 - now the Flash ST M29W040B is supported (not tested)
20303 - fix the "led" command
20304 - fix compile error, if BUILD_DIR is used
20306 Signed-off-by: Heiko Schocher <hs@denx.de>
20308 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
20309 Author: Stefan Roese <sr@denx.de>
20310 Date: Sun Jul 8 13:44:27 2007 +0200
20312 Fix malloc problem introduced with the relocation fixup for the PPC platform
20314 The relocation fixup didn't handle the malloc pointer initialization
20315 correctly. This patch fixes this problem. Tested successfully on 4xx.
20316 The relocation fixup patches for 4xx will follow soon.
20318 Signed-off-by: Stefan Roese <sr@denx.de>
20320 commit 0dca874db62718e41253659e60f3a1de7eb418ce
20321 Author: TsiChung <tcliew@Goku.(none)>
20322 Date: Tue Jul 10 15:45:43 2007 -0500
20324 Cache update and added CFG_UNIFY_CACHE
20326 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
20328 Signed-off-by: TsiChung <tcliew@Goku.(none)>
20330 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
20331 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20332 Date: Thu Jul 5 23:36:16 2007 -0500
20334 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
20336 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
20338 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20340 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
20341 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20342 Date: Thu Jul 5 23:31:25 2007 -0500
20344 Update header files
20346 Include immap.h and renamed mcfrtc.h to rtc.h
20348 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20350 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
20351 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20352 Date: Thu Jul 5 23:29:21 2007 -0500
20354 Add mcffec_initialize()
20356 Added mcffec_initialize() in eth_initialize()
20358 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20360 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
20361 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20362 Date: Thu Jul 5 23:27:40 2007 -0500
20364 Update header file and clean up
20368 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20370 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
20371 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20372 Date: Thu Jul 5 23:23:15 2007 -0500
20374 New uart structure and defines
20376 Seperated from mcfuart.h
20378 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20380 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
20381 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20382 Date: Thu Jul 5 23:22:31 2007 -0500
20384 New timer structure and defines
20386 Seperated from mcftimer.h
20388 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20390 commit e04acb2eba4782489417240eff76e20e176aec10
20391 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20392 Date: Thu Jul 5 23:21:09 2007 -0500
20394 Rename mcfrtc to rtc
20396 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
20398 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20400 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
20401 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20402 Date: Thu Jul 5 23:17:36 2007 -0500
20404 Rename mcfserial.c. Update include header
20406 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
20408 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20410 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
20411 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20412 Date: Thu Jul 5 23:13:58 2007 -0500
20414 Header file update, clean up and cache handling
20416 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
20418 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20420 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
20421 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20422 Date: Thu Jul 5 23:10:40 2007 -0500
20424 Create interrupts.c and modify Makefile
20426 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
20428 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20430 commit ddd104f1ed655eda50c06ba636237a83ed943f34
20431 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20432 Date: Thu Jul 5 23:06:55 2007 -0500
20436 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20438 commit b9bf3de377b2bae70c983c9b97feae914999e735
20439 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20440 Date: Thu Jul 5 23:05:31 2007 -0500
20442 Update header file and some clean up
20444 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
20446 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20448 commit 84a015b52ec820a5ae173717d78516de731c89c2
20449 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20450 Date: Thu Jul 5 23:03:28 2007 -0500
20452 Update header file and enable icache
20454 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
20456 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20458 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
20459 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20460 Date: Thu Jul 5 23:01:22 2007 -0500
20462 Update header file and removed interrupt_init()
20464 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
20466 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20468 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
20469 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20470 Date: Thu Jul 5 22:57:46 2007 -0500
20472 Update for flash.o and mii.o
20474 Removed flash.o and added mii.o
20476 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20478 commit c5ded275d839e4ff79f41718d50a835d989f57bc
20479 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20480 Date: Thu Jul 5 22:56:19 2007 -0500
20482 MII functions calls.
20484 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20486 commit 427c814104560e29bda14955c67703245aaaa5b4
20487 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20488 Date: Thu Jul 5 22:54:42 2007 -0500
20490 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
20492 The removed MII routines will be placed in mii.c.
20494 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20496 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
20497 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20498 Date: Thu Jul 5 22:51:05 2007 -0500
20502 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
20504 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20506 commit 2744354a8437b8f78db178e30660215688bff570
20507 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20508 Date: Thu Jul 5 22:46:38 2007 -0500
20510 Seperate old structure defines and new structure defines
20512 Removed new uart structure and defines to uart.h
20514 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20516 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
20517 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20518 Date: Thu Jul 5 22:45:01 2007 -0500
20520 Seperate old structure defines and new structure defines
20522 New timer structure and defines will move to new timer.h
20524 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20526 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
20527 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20528 Date: Thu Jul 5 22:42:23 2007 -0500
20534 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20536 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
20537 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20538 Date: Thu Jul 5 22:41:24 2007 -0500
20542 Replaced whitespace with tabs
20544 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20546 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
20547 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20548 Date: Thu Jul 5 22:39:07 2007 -0500
20550 Create new header file and move peripherals base address from configs file to new header file.
20552 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
20554 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20556 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
20557 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20558 Date: Thu Jul 5 22:24:58 2007 -0500
20562 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
20564 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20566 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
20567 Author: Jon Loeliger <jdl@freescale.com>
20568 Date: Tue Jul 10 11:19:50 2007 -0500
20570 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
20572 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
20573 Those always evaluated TRUE, and thus were always compiled
20574 even when IDE really wasn't defined/wanted.
20576 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20578 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
20579 Author: Jon Loeliger <jdl@freescale.com>
20580 Date: Tue Jul 10 11:13:21 2007 -0500
20582 drivers/: Remove lingering references to CFG_CMD_* symbols.
20584 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
20585 Those always evaluated TRUE, and thus were always compiled
20586 even when IDE really wasn't defined/wanted.
20588 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20590 commit f40a7f3e3888b42a43674b099e5470022c8c544c
20591 Author: Jon Loeliger <jdl@freescale.com>
20592 Date: Tue Jul 10 11:07:56 2007 -0500
20594 fs/: Remove lingering references to CFG_CMD_* symbols.
20596 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
20597 Those always evaluated TRUE, and thus were always compiled
20598 even when IDE really wasn't defined/wanted.
20600 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20602 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
20603 Author: Jon Loeliger <jdl@freescale.com>
20604 Date: Tue Jul 10 11:05:02 2007 -0500
20606 net/: Remove lingering references to CFG_CMD_* symbols.
20608 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
20609 Those always evaluated TRUE, and thus were always compiled
20610 even when IDE really wasn't defined/wanted.
20612 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20614 commit 902531788376046da212afd1661cffb62f3daa1c
20615 Author: Jon Loeliger <jdl@freescale.com>
20616 Date: Tue Jul 10 11:02:44 2007 -0500
20618 common/: Remove lingering references to CFG_CMD_* symbols.
20620 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
20621 Those always evaluated TRUE, and thus were always compiled
20622 even when IDE really wasn't defined/wanted.
20624 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20626 commit d39b57415838c73fb0a37eca84de3c68ba990586
20627 Author: Jon Loeliger <jdl@freescale.com>
20628 Date: Tue Jul 10 10:48:22 2007 -0500
20630 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
20632 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
20633 Those always evaluated TRUE, and thus were always compiled
20634 even when IDE really wasn't defined/wanted.
20636 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20638 commit 77a318545d57aefa844752465b94c7e09a3f26d0
20639 Author: Jon Loeliger <jdl@freescale.com>
20640 Date: Tue Jul 10 10:39:10 2007 -0500
20642 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
20644 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
20645 Those always evaluated TRUE, and thus were always compiled
20646 even when IDE really wasn't defined/wanted.
20648 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20650 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
20651 Author: Jon Loeliger <jdl@freescale.com>
20652 Date: Tue Jul 10 10:27:39 2007 -0500
20654 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
20656 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20658 commit 079a136c3588814784561d6e4856970ee82d6e2a
20659 Author: Jon Loeliger <jdl@freescale.com>
20660 Date: Tue Jul 10 10:12:10 2007 -0500
20662 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
20664 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
20665 used to be included but CONFIG_BOOTP_MASK was not defined.
20667 Remove lingering references to CFG_CMD_* symbols.
20669 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20671 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
20672 Author: Jon Loeliger <jdl@freescale.com>
20673 Date: Tue Jul 10 09:38:02 2007 -0500
20675 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
20677 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
20678 used to be included but CONFIG_BOOTP_MASK was not defined.
20680 Remove lingering references to CFG_CMD_* symbols.
20682 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20684 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
20685 Author: Jon Loeliger <jdl@freescale.com>
20686 Date: Tue Jul 10 09:29:01 2007 -0500
20688 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
20690 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
20691 used to be included but CONFIG_BOOTP_MASK was not defined.
20693 Remove lingering references to CFG_CMD_* symbols.
20695 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20697 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
20698 Author: Jon Loeliger <jdl@freescale.com>
20699 Date: Tue Jul 10 09:22:23 2007 -0500
20701 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
20703 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
20704 used to be included but CONFIG_BOOTP_MASK was not defined.
20706 Remove lingering references to CFG_CMD_* symbols.
20708 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20710 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
20711 Author: Jon Loeliger <jdl@freescale.com>
20712 Date: Tue Jul 10 09:10:49 2007 -0500
20714 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
20716 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
20717 used to be included but CONFIG_BOOTP_MASK was not defined.
20719 Remove lingering references to CFG_CMD_* symbols.
20721 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20723 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
20724 Author: Jon Loeliger <jdl@freescale.com>
20725 Date: Tue Jul 10 09:02:57 2007 -0500
20727 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
20729 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
20730 used to be included but CONFIG_BOOTP_MASK was not defined.
20732 Remove lingering references to CFG_CMD_* symbols.
20734 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20736 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
20737 Author: Jon Loeliger <jdl@freescale.com>
20738 Date: Mon Jul 9 22:08:34 2007 -0500
20740 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
20742 All of the choices for CONFIG_BOOTP_ are now documented in
20743 the README file. You must now individually select exactly
20744 the set that you want using a series of
20745 #define CONFIG_BOOTP_<x>
20746 statements in the board port config files now.
20748 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20750 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
20751 Author: Jon Loeliger <jdl@freescale.com>
20752 Date: Mon Jul 9 21:57:31 2007 -0500
20754 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
20756 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20758 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
20759 Author: Jon Loeliger <jdl@freescale.com>
20760 Date: Mon Jul 9 21:48:26 2007 -0500
20762 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
20764 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20766 commit 37d4bb70586659dedef1658ce1bed071be098aec
20767 Author: Jon Loeliger <jdl@freescale.com>
20768 Date: Mon Jul 9 21:38:02 2007 -0500
20770 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
20772 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20774 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
20775 Author: Jon Loeliger <jdl@freescale.com>
20776 Date: Mon Jul 9 21:31:24 2007 -0500
20778 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
20780 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20782 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
20783 Author: Jon Loeliger <jdl@freescale.com>
20784 Date: Mon Jul 9 21:24:19 2007 -0500
20786 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
20788 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20790 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
20791 Author: Jon Loeliger <jdl@freescale.com>
20792 Date: Mon Jul 9 21:16:53 2007 -0500
20794 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
20796 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20798 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
20799 Author: Jon Loeliger <jdl@freescale.com>
20800 Date: Mon Jul 9 19:12:30 2007 -0500
20802 Retire CONFIG_COMMANDS finally.
20803 Strip old CFG_CMD_* symbols out.
20805 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20807 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
20808 Author: Jon Loeliger <jdl@freescale.com>
20809 Date: Mon Jul 9 19:10:03 2007 -0500
20811 Update README.* to reference new CONFIG_CMD_* names now.
20813 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20815 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
20816 Author: Jon Loeliger <jdl@freescale.com>
20817 Date: Mon Jul 9 19:06:00 2007 -0500
20819 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
20821 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20823 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
20824 Author: Jon Loeliger <jdl@freescale.com>
20825 Date: Mon Jul 9 18:57:22 2007 -0500
20827 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
20829 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20831 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
20832 Author: Jon Loeliger <jdl@freescale.com>
20833 Date: Mon Jul 9 18:45:16 2007 -0500
20835 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
20837 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20839 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
20840 Author: Jon Loeliger <jdl@freescale.com>
20841 Date: Mon Jul 9 18:38:39 2007 -0500
20843 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
20845 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20847 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
20848 Author: Jon Loeliger <jdl@freescale.com>
20849 Date: Mon Jul 9 18:31:28 2007 -0500
20851 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
20853 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20855 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
20856 Author: Jon Loeliger <jdl@freescale.com>
20857 Date: Mon Jul 9 18:24:55 2007 -0500
20859 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
20861 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20863 commit fcec2eb93e126400009729328e797f12bc94f1fd
20864 Author: Jon Loeliger <jdl@freescale.com>
20865 Date: Mon Jul 9 18:19:09 2007 -0500
20867 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
20869 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20871 commit a593814f2be0c9cdc3133cd550b167b8a988328f
20872 Author: Jon Loeliger <jdl@freescale.com>
20873 Date: Mon Jul 9 18:10:50 2007 -0500
20875 rtc/: Remove obsolete references to CONFIG_COMMANDS
20877 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20879 commit 67350568f9d46e66c21829f3513b3db0caeb948b
20880 Author: Jon Loeliger <jdl@freescale.com>
20881 Date: Mon Jul 9 18:05:38 2007 -0500
20883 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
20885 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20887 commit 7def6b34f910f08d7ef0a14646da067719237ca2
20888 Author: Jon Loeliger <jdl@freescale.com>
20889 Date: Mon Jul 9 18:02:11 2007 -0500
20891 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
20893 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20895 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
20896 Author: Jon Loeliger <jdl@freescale.com>
20897 Date: Mon Jul 9 17:56:50 2007 -0500
20899 fs/: Remove obsolete references to CONFIG_COMMANDS
20901 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20903 commit c91898bbc505aff3e12a807af88e76da18efb7ee
20904 Author: Jon Loeliger <jdl@freescale.com>
20905 Date: Mon Jul 9 17:46:09 2007 -0500
20907 tools/: Remove obsolete references to CONFIG_COMMANDS
20909 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20911 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
20912 Author: Jon Loeliger <jdl@freescale.com>
20913 Date: Mon Jul 9 17:45:14 2007 -0500
20915 net/: Remove obsolete references to CONFIG_COMMANDS
20917 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20919 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
20920 Author: Jon Loeliger <jdl@freescale.com>
20921 Date: Mon Jul 9 17:39:42 2007 -0500
20923 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
20925 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20927 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
20928 Author: Jon Loeliger <jdl@freescale.com>
20929 Date: Mon Jul 9 17:30:01 2007 -0500
20931 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
20933 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20935 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
20936 Author: Jon Loeliger <jdl@freescale.com>
20937 Date: Mon Jul 9 17:22:37 2007 -0500
20939 disk/: Remove obsolete references to CONFIG_COMMANDS
20941 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20943 commit 639221c76c88215bd55af83ad174fc30d1940f8f
20944 Author: Jon Loeliger <jdl@freescale.com>
20945 Date: Mon Jul 9 17:15:49 2007 -0500
20947 include/: Remove obsolete references to CONFIG_COMMANDS
20948 Mostly removed from comments here.
20950 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20952 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
20953 Author: Wolfgang Denk <wd@denx.de>
20954 Date: Tue Jul 10 00:01:28 2007 +0200
20956 Coding style cleanup; update CHANGELOG.
20958 Signed-off-by: Wolfgang Denk <wd@denx.de>
20960 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
20961 Author: Stefan Roese <sr@denx.de>
20962 Date: Mon Jul 9 11:00:24 2007 +0200
20964 Small coding style cleanup
20966 Signed-off-by: Stefan Roese <sr@denx.de>
20968 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
20969 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20970 Date: Mon Jul 9 10:10:08 2007 +0200
20972 Migrate esd 405EP boards to new NAND subsystem
20974 Remove unused CFG_NAND_LEGACY define
20976 These boards to not have NAND.
20978 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20980 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
20981 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20982 Date: Mon Jul 9 10:10:06 2007 +0200
20984 Migrate esd 405EP boards to new NAND subsystem
20986 Migrate esd 405EP boards to new NAND subsystem
20989 -use correct io accessors (in/out_be32())
20991 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20993 commit e09f7ab5749c345f924da272bea0521a73af5b11
20994 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
20995 Date: Mon Jul 9 10:10:04 2007 +0200
20997 Migrate esd 405EP boards to new NAND subsystem
20999 This patch prepares the migration from the legacy NAND driver
21000 to U-Boot's new NAND subsystem for esd boards.
21002 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21004 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
21005 Author: Jon Loeliger <jdl@freescale.com>
21006 Date: Sun Jul 8 18:10:08 2007 -0500
21008 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
21010 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21012 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
21013 Author: Jon Loeliger <jdl@freescale.com>
21014 Date: Sun Jul 8 18:05:39 2007 -0500
21016 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
21018 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21020 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
21021 Author: Jon Loeliger <jdl@freescale.com>
21022 Date: Sun Jul 8 18:02:23 2007 -0500
21024 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
21026 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21028 commit baa26db4113679b80970ff447d91cc10217742a6
21029 Author: Jon Loeliger <jdl@freescale.com>
21030 Date: Sun Jul 8 17:51:39 2007 -0500
21032 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
21034 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21036 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
21037 Author: Jon Loeliger <jdl@freescale.com>
21038 Date: Sun Jul 8 17:02:01 2007 -0500
21040 Clear up confusion over the CMD_POST and POST_DIAG mess.
21042 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
21043 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
21044 Clear this mess up some.
21046 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21048 commit b3631487105a57ab7cbadfc26efbaf9676275018
21049 Author: Jon Loeliger <jdl@freescale.com>
21050 Date: Sun Jul 8 15:45:08 2007 -0500
21052 Remove references to the old cmd_confdefs.h include file.
21054 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21056 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
21057 Author: Jon Loeliger <jdl@freescale.com>
21058 Date: Sun Jul 8 15:42:59 2007 -0500
21060 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
21062 Use new CONFIG_CMD_* in lwmon5.h board config file.
21063 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
21065 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21067 commit a5562901661bd428f7e5feb333f796372cb81019
21068 Author: Jon Loeliger <jdl@freescale.com>
21069 Date: Sun Jul 8 15:31:57 2007 -0500
21071 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
21073 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21075 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
21076 Author: Jon Loeliger <jdl@freescale.com>
21077 Date: Sun Jul 8 15:02:44 2007 -0500
21079 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
21081 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21083 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
21084 Author: Jon Loeliger <jdl@freescale.com>
21085 Date: Sun Jul 8 15:12:40 2007 -0500
21087 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
21089 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21091 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
21092 Author: Jon Loeliger <jdl@freescale.com>
21093 Date: Sun Jul 8 14:55:07 2007 -0500
21095 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
21097 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21099 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
21100 Author: Jon Loeliger <jdl@freescale.com>
21101 Date: Sun Jul 8 14:49:44 2007 -0500
21103 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
21105 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21107 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
21108 Author: Jon Loeliger <jdl@freescale.com>
21109 Date: Sun Jul 8 14:21:43 2007 -0500
21111 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
21113 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21115 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
21116 Author: Jon Loeliger <jdl@freescale.com>
21117 Date: Sun Jul 8 14:14:17 2007 -0500
21119 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
21121 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21123 commit 348f258f24253433e4a2302a0bbceb6740a67246
21124 Author: Jon Loeliger <jdl@freescale.com>
21125 Date: Sun Jul 8 13:46:18 2007 -0500
21127 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
21129 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21131 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
21132 Author: Jon Loeliger <jdl@freescale.com>
21133 Date: Sun Jul 8 10:09:35 2007 -0500
21135 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
21137 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21139 commit 60a0876b5106b34220e459c208bbf648073306c0
21140 Author: Jon Loeliger <jdl@freescale.com>
21141 Date: Sat Jul 7 21:04:26 2007 -0500
21143 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
21145 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21147 commit dcaa71562826a2466e894c868d132509dcda8444
21148 Author: Jon Loeliger <jdl@freescale.com>
21149 Date: Sat Jul 7 20:56:05 2007 -0500
21151 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
21153 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21155 commit 3c3227f3c737502311b25b72084573901cbbf17d
21156 Author: Jon Loeliger <jdl@freescale.com>
21157 Date: Sat Jul 7 20:40:43 2007 -0500
21159 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
21161 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21163 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
21164 Author: Jon Loeliger <jdl@freescale.com>
21165 Date: Thu Jul 5 19:52:35 2007 -0500
21167 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
21169 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21171 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
21172 Author: Jon Loeliger <jdl@freescale.com>
21173 Date: Thu Jul 5 19:32:07 2007 -0500
21175 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
21177 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21179 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
21180 Author: Jon Loeliger <jdl@freescale.com>
21181 Date: Thu Jul 5 19:13:52 2007 -0500
21183 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
21185 Since ADS860.h includes "board/fads/fads.h" with ramifications
21186 on the CONFIG_COMMAND treatment, it too has to be adjusted to
21187 exclude already configured commands in this same commit.
21189 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21191 commit 10e038932f22ee80ebd53de312531e70e6590a2f
21192 Author: Thomas Knobloch <knobloch@siemens.com>
21193 Date: Fri Jul 6 14:58:39 2007 +0200
21195 [NAND] Bad block skipping for command nboot
21197 The old implementation of command nboot does not support reading the image from
21198 NAND flash with skipping of bad blocks. The patch implements a new version of
21199 the nboot command: by calling nboot.jffs2 from the u-boot command line the
21200 command will load the image from NAND flash with respect to bad blocks (by using
21201 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
21204 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
21205 Signed-off-by: Stefan Roese <sr@denx.de>
21207 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
21208 Author: Stefan Roese <sr@denx.de>
21209 Date: Fri Jul 6 12:26:51 2007 +0200
21211 ppc4xx: Update lwmon5 default environment
21213 Signed-off-by: Stefan Roese <sr@denx.de>
21215 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
21216 Author: Stefan Roese <sr@denx.de>
21217 Date: Fri Jul 6 11:48:24 2007 +0200
21219 ppc4xx: Update lwmon5 board
21221 Add unlock=yes environment variable to default variables to unlock
21222 the CFI flash by default.
21224 Signed-off-by: Stefan Roese <sr@denx.de>
21226 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
21227 Author: Stefan Roese <sr@denx.de>
21228 Date: Fri Jul 6 09:45:47 2007 +0200
21230 Fix problem with get/setdcr commands introduced by cfg patches
21232 Signed-off-by: Stefan Roese <sr@denx.de>
21234 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
21235 Author: Wolfgang Denk <wd@denx.de>
21236 Date: Fri Jul 6 02:50:19 2007 +0200
21238 Code cleanup and default config update for STC GP3 SSA board.
21240 Signed-off-by: Wolfgang Denk <wd@denx.de>
21242 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
21243 Author: Wolfgang Denk <wd@denx.de>
21244 Date: Thu Jul 5 17:56:27 2007 +0200
21246 Fixing some typos etc. introduced mainly by cfg patches.
21248 Signed-off-by: Wolfgang Denk <wd@denx.de>
21250 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
21251 Author: Wolfgang Denk <wd@denx.de>
21252 Date: Thu Jul 5 11:12:16 2007 +0200
21254 Minor coding style cleanup. Update CHANGELOG.
21256 commit dca3b3d6d6396b67e5e84af53452164923c73443
21257 Author: Jon Loeliger <jdl@jdl.com>
21258 Date: Wed Jul 4 22:33:46 2007 -0500
21260 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
21262 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21264 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
21265 Author: Jon Loeliger <jdl@jdl.com>
21266 Date: Wed Jul 4 22:33:38 2007 -0500
21268 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
21270 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21272 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
21273 Author: Jon Loeliger <jdl@jdl.com>
21274 Date: Wed Jul 4 22:33:30 2007 -0500
21276 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
21278 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21280 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
21281 Author: Jon Loeliger <jdl@jdl.com>
21282 Date: Wed Jul 4 22:33:23 2007 -0500
21284 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
21286 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21288 commit 26a34560d56a9df5bc2ae23525d9229736134757
21289 Author: Jon Loeliger <jdl@jdl.com>
21290 Date: Wed Jul 4 22:33:17 2007 -0500
21292 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
21294 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21296 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
21297 Author: Jon Loeliger <jdl@jdl.com>
21298 Date: Wed Jul 4 22:33:13 2007 -0500
21300 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
21302 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21304 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
21305 Author: Jon Loeliger <jdl@jdl.com>
21306 Date: Wed Jul 4 22:33:07 2007 -0500
21308 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
21310 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21312 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
21313 Author: Jon Loeliger <jdl@jdl.com>
21314 Date: Wed Jul 4 22:33:01 2007 -0500
21316 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
21318 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21320 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
21321 Author: Jon Loeliger <jdl@jdl.com>
21322 Date: Wed Jul 4 22:32:57 2007 -0500
21324 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
21326 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21328 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
21329 Author: Jon Loeliger <jdl@jdl.com>
21330 Date: Wed Jul 4 22:32:51 2007 -0500
21332 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
21334 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21336 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
21337 Author: Jon Loeliger <jdl@jdl.com>
21338 Date: Wed Jul 4 22:32:32 2007 -0500
21340 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
21342 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21344 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
21345 Author: Jon Loeliger <jdl@jdl.com>
21346 Date: Wed Jul 4 22:32:25 2007 -0500
21348 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
21350 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21352 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
21353 Author: Jon Loeliger <jdl@jdl.com>
21354 Date: Wed Jul 4 22:32:19 2007 -0500
21356 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
21358 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21360 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
21361 Author: Jon Loeliger <jdl@jdl.com>
21362 Date: Wed Jul 4 22:32:10 2007 -0500
21364 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
21366 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21368 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
21369 Author: Jon Loeliger <jdl@jdl.com>
21370 Date: Wed Jul 4 22:32:03 2007 -0500
21372 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
21374 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21376 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
21377 Author: Jon Loeliger <jdl@jdl.com>
21378 Date: Wed Jul 4 22:31:56 2007 -0500
21380 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
21382 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21384 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
21385 Author: Jon Loeliger <jdl@jdl.com>
21386 Date: Wed Jul 4 22:31:49 2007 -0500
21388 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
21390 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21392 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
21393 Author: Jon Loeliger <jdl@jdl.com>
21394 Date: Wed Jul 4 22:31:42 2007 -0500
21396 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
21398 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21400 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
21401 Author: Jon Loeliger <jdl@jdl.com>
21402 Date: Wed Jul 4 22:31:35 2007 -0500
21404 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
21406 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21408 commit d794cfefead5fc177cf4f41164e80382e9c9484a
21409 Author: Jon Loeliger <jdl@jdl.com>
21410 Date: Wed Jul 4 22:31:15 2007 -0500
21412 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
21414 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21416 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
21417 Author: Jon Loeliger <jdl@jdl.com>
21418 Date: Wed Jul 4 22:31:07 2007 -0500
21420 include/configs: Use new CONFIG_CMD_* in STx board config files.
21422 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21424 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
21425 Author: Jon Loeliger <jdl@jdl.com>
21426 Date: Wed Jul 4 22:30:58 2007 -0500
21428 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
21430 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21432 commit 2694690e285acaa34922f55f4b5ae030da60c55a
21433 Author: Jon Loeliger <jdl@jdl.com>
21434 Date: Wed Jul 4 22:30:50 2007 -0500
21436 include/configs: Use new CONFIG_CMD_* in TQM board config files.
21438 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21440 commit 1cc4c458329765b58e584a19821e796b3c10e976
21441 Author: Jon Loeliger <jdl@jdl.com>
21442 Date: Wed Jul 4 22:30:28 2007 -0500
21444 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
21446 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21448 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
21449 Author: Jon Loeliger <jdl@jdl.com>
21450 Date: Wed Jul 4 22:30:06 2007 -0500
21452 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
21454 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21456 commit b44896215a09c60fa40cae906f7ed207bbc2c492
21457 Author: Sergei Poselenov <sposelenov@emcraft.com>
21458 Date: Thu Jul 5 08:17:37 2007 +0200
21460 Merged POST framework with the current TOT.
21462 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
21464 commit b24629fa377214d63bb40d1360e354b6d3e4af56
21465 Author: Jon Loeliger <jdl@jdl.com>
21466 Date: Wed Jun 13 13:23:15 2007 -0500
21468 mpc86xx: Remove old CFG_CMD_* references.
21470 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21472 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
21473 Author: Jon Loeliger <jdl@jdl.com>
21474 Date: Wed Jun 13 13:22:54 2007 -0500
21476 Add MPC8568MDS to MAKEALL 85xx target.
21478 It was missing from the original port submission.
21480 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21482 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
21483 Author: Jon Loeliger <jdl@jdl.com>
21484 Date: Wed Jun 13 13:22:08 2007 -0500
21486 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
21488 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21490 commit 56b304ac2091689506088a9ae67f63fd6300cf16
21491 Author: Jon Loeliger <jdl@jdl.com>
21492 Date: Wed Jun 13 13:21:37 2007 -0500
21494 Fix #if typo in CONFIG_CMD_* changes.
21496 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21498 commit f780b83316d9af1f61d71cc88b1917b387b9b995
21499 Author: Niklaus Giger <niklausgiger@gmx.ch>
21500 Date: Wed Jun 27 18:11:38 2007 +0200
21502 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
21504 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
21506 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
21507 Author: Stefan Roese <sr@denx.de>
21508 Date: Wed Jul 4 10:06:30 2007 +0200
21510 ppc4xx: Update lwmon5 board
21512 - Add optional ECC generation routine to preserve existing
21513 RAM values. This is needed for the Linux log-buffer support
21514 - Add optional DDR2 setup with CL=4
21515 - GPIO50 not used anymore
21516 - Lime register setup added
21518 Signed-off-by: Stefan Roese <sr@denx.de>
21520 commit 6810a34677dbc446334f5e451f1682426dd33b49
21521 Author: Grant Likely <grant.likely@secretlab.ca>
21522 Date: Tue Jul 3 00:17:28 2007 -0600
21524 Fix Makefile to use $(MKCONFIG) macro for all board ports
21526 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21528 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
21529 Author: Grant Likely <grant.likely@secretlab.ca>
21530 Date: Tue Jul 3 00:17:28 2007 -0600
21532 Fix Makefile to use $(MKCONFIG) macro for all board ports
21534 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21536 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
21537 Author: Grant Likely <grant.likely@secretlab.ca>
21538 Date: Tue Jul 3 00:34:49 2007 -0600
21540 Correct fixup relocation for mpc83xx
21542 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21544 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
21545 Author: Grant Likely <grant.likely@secretlab.ca>
21546 Date: Tue Jul 3 00:34:44 2007 -0600
21548 Correct fixup relocation for mpc8260
21550 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21552 commit f3a52fe05923935db86985daf9438e2f70ac39aa
21553 Author: Grant Likely <grant.likely@secretlab.ca>
21554 Date: Tue Jul 3 00:34:39 2007 -0600
21556 Correct fixup relocation for mpc824x
21558 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21560 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
21561 Author: Grant Likely <grant.likely@secretlab.ca>
21562 Date: Tue Jul 3 00:34:34 2007 -0600
21564 Correct fixup relocation for mpc8220
21566 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21568 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
21569 Author: Grant Likely <grant.likely@secretlab.ca>
21570 Date: Tue Jul 3 00:34:29 2007 -0600
21572 Correct fixup relocation for MPC5xxx
21574 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21576 commit 3649cd99ba815b6601868735765602f00ef3692b
21577 Author: Grant Likely <grant.likely@secretlab.ca>
21578 Date: Tue Jul 3 00:34:24 2007 -0600
21580 Correct relocation fixup for mpc5xx
21582 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21584 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
21585 Author: Grant Likely <grant.likely@secretlab.ca>
21586 Date: Tue Jul 3 00:34:19 2007 -0600
21588 Don't set gd->reloc_off if relocation of .fixup works correctly
21590 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21592 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
21593 Author: Grant Likely <grant.likely@secretlab.ca>
21594 Date: Tue Jul 3 00:34:14 2007 -0600
21596 Remove obsolete mpc83xx linker scripts
21598 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21600 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
21601 Author: Grant Likely <grant.likely@secretlab.ca>
21602 Date: Tue Jul 3 00:34:09 2007 -0600
21604 Consolidate mpc8260 linker scripts
21606 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21608 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
21609 Author: Grant Likely <grant.likely@secretlab.ca>
21610 Date: Tue Jul 3 00:34:04 2007 -0600
21612 Remove obsolete mpc824x linker scripts
21614 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21616 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
21617 Author: Grant Likely <grant.likely@secretlab.ca>
21618 Date: Tue Jul 3 00:33:59 2007 -0600
21620 Remove obsolete mpc824x linker scripts (3 of 4)
21622 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21624 commit a71c084f3ac7fedf144537db2b2da47323068833
21625 Author: Grant Likely <grant.likely@secretlab.ca>
21626 Date: Tue Jul 3 00:33:53 2007 -0600
21628 Remove obsolete mpc824x linker scripts (2 of 4)
21630 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21632 commit f670a15468d1365241d40022b9408e1004181f5e
21633 Author: Grant Likely <grant.likely@secretlab.ca>
21634 Date: Tue Jul 3 00:33:48 2007 -0600
21636 Remove obsolete mpc824x linker scripts (1 of 4)
21638 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21640 commit 09555bd45a04c0e54f172528d21bc18896550d28
21641 Author: Grant Likely <grant.likely@secretlab.ca>
21642 Date: Tue Jul 3 00:33:43 2007 -0600
21644 Remove obsolete mpc8220 linker scripts
21646 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21648 commit 5efb992f046e51225c93d52f80fecbe433abd789
21649 Author: Grant Likely <grant.likely@secretlab.ca>
21650 Date: Tue Jul 3 00:33:38 2007 -0600
21652 Remove obsolete mpc5xxx linker scripts (3 of 3)
21654 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21656 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
21657 Author: Grant Likely <grant.likely@secretlab.ca>
21658 Date: Tue Jul 3 00:33:33 2007 -0600
21660 Remove obsolete mpc5xxx linker scripts (2 of 3)
21662 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21664 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
21665 Author: Grant Likely <grant.likely@secretlab.ca>
21666 Date: Tue Jul 3 00:33:28 2007 -0600
21668 Remove obsolete mpc5xxx linker scripts (1 of 3)
21670 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21672 commit b7d8e05f8675249b5f208aa73babeed384a4519d
21673 Author: Grant Likely <grant.likely@secretlab.ca>
21674 Date: Tue Jul 3 00:33:23 2007 -0600
21676 Remove obsolete mpc5xx linker scripts
21678 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21680 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
21681 Author: Grant Likely <grant.likely@secretlab.ca>
21682 Date: Tue Jul 3 00:33:18 2007 -0600
21684 Consolidate mpc83xx linker scripts
21686 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21688 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
21689 Author: Grant Likely <grant.likely@secretlab.ca>
21690 Date: Tue Jul 3 00:33:13 2007 -0600
21692 Consolidate mpc8260 linker scripts
21694 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21696 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
21697 Author: Grant Likely <grant.likely@secretlab.ca>
21698 Date: Tue Jul 3 00:33:08 2007 -0600
21700 Consolidate mpc824x linker scripts
21702 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21704 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
21705 Author: Grant Likely <grant.likely@secretlab.ca>
21706 Date: Tue Jul 3 00:33:03 2007 -0600
21708 Consolidate mpc8220 linker scripts
21710 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21712 commit d181c9a15cd41863fe24840d17848429f27d3c8c
21713 Author: Grant Likely <grant.likely@secretlab.ca>
21714 Date: Tue Jul 3 00:32:58 2007 -0600
21716 Consolidate mpc5xxx linker scripts
21718 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21720 commit 287ac924adb7291bebe5086652a362a30ab28b13
21721 Author: Grant Likely <grant.likely@secretlab.ca>
21722 Date: Tue Jul 3 00:32:53 2007 -0600
21724 Consolidate mpc5xx linker scripts
21726 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21728 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
21729 Author: Wolfgang Denk <wd@denx.de>
21730 Date: Wed Jul 4 00:43:53 2007 +0200
21732 Fix a few file permission problems.
21734 Signed-off-by: Wolfgang Denk <wd@denx.de>
21736 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
21737 Author: Wolfgang Denk <wd@denx.de>
21738 Date: Wed Jul 4 00:38:38 2007 +0200
21740 Minor coding style cleanup. Rebuild CHANGELOG file.
21742 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
21743 Author: Jon Loeliger <jdl@jdl.com>
21744 Date: Mon Jun 11 19:03:44 2007 -0500
21746 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
21748 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21750 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
21751 Author: Jon Loeliger <jdl@jdl.com>
21752 Date: Mon Jun 11 19:03:39 2007 -0500
21754 README: Rewrite command line config to use CONFIG_CMD_* names.
21756 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21758 commit 72a074cec68e5bad60d63206c050974e08afd804
21759 Author: Jon Loeliger <jdl@jdl.com>
21760 Date: Mon Jun 11 19:03:34 2007 -0500
21762 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21764 This is a compatibility step that allows both the older form
21765 and the new form to co-exist for a while until the older can
21766 be removed entirely.
21768 All transformations are of the form:
21770 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21772 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21774 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21776 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
21777 Author: Jon Loeliger <jdl@jdl.com>
21778 Date: Mon Jun 11 19:03:28 2007 -0500
21780 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21782 This is a compatibility step that allows both the older form
21783 and the new form to co-exist for a while until the older can
21784 be removed entirely.
21786 All transformations are of the form:
21788 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21790 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21792 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21794 commit 9107ebe0d352420895ab69b715697bdebc8caf50
21795 Author: Jon Loeliger <jdl@jdl.com>
21796 Date: Mon Jun 11 19:03:23 2007 -0500
21798 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21800 This is a compatibility step that allows both the older form
21801 and the new form to co-exist for a while until the older can
21802 be removed entirely.
21804 All transformations are of the form:
21806 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21808 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21810 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21812 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
21813 Author: Jon Loeliger <jdl@jdl.com>
21814 Date: Mon Jun 11 19:03:19 2007 -0500
21816 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21818 This is a compatibility step that allows both the older form
21819 and the new form to co-exist for a while until the older can
21820 be removed entirely.
21822 All transformations are of the form:
21824 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21826 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21828 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21830 commit 737184114ec9c9e0ab94d6713536126073bd2472
21831 Author: Jon Loeliger <jdl@jdl.com>
21832 Date: Mon Jun 11 19:03:15 2007 -0500
21834 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21836 This is a compatibility step that allows both the older form
21837 and the new form to co-exist for a while until the older can
21838 be removed entirely.
21840 All transformations are of the form:
21842 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21844 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21846 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21848 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
21849 Author: Jon Loeliger <jdl@jdl.com>
21850 Date: Mon Jun 11 19:03:08 2007 -0500
21852 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21854 This is a compatibility step that allows both the older form
21855 and the new form to co-exist for a while until the older can
21856 be removed entirely.
21858 All transformations are of the form:
21860 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21862 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21864 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21866 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
21867 Author: Jon Loeliger <jdl@jdl.com>
21868 Date: Mon Jun 11 19:03:03 2007 -0500
21870 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21872 This is a compatibility step that allows both the older form
21873 and the new form to co-exist for a while until the older can
21874 be removed entirely.
21876 All transformations are of the form:
21878 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21880 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21882 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21884 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
21885 Author: Jon Loeliger <jdl@jdl.com>
21886 Date: Mon Jun 11 19:02:58 2007 -0500
21888 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21890 This is a compatibility step that allows both the older form
21891 and the new form to co-exist for a while until the older can
21892 be removed entirely.
21894 All transformations are of the form:
21896 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21898 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21900 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21902 commit 98b79003c21c2578206003256de4e781d6b36ca8
21903 Author: Jon Loeliger <jdl@jdl.com>
21904 Date: Mon Jun 11 19:02:53 2007 -0500
21906 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21908 This is a compatibility step that allows both the older form
21909 and the new form to co-exist for a while until the older can
21910 be removed entirely.
21912 All transformations are of the form:
21914 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21916 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21918 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21920 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
21921 Author: Jon Loeliger <jdl@jdl.com>
21922 Date: Mon Jun 11 19:02:49 2007 -0500
21924 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21926 This is a compatibility step that allows both the older form
21927 and the new form to co-exist for a while until the older can
21928 be removed entirely.
21930 All transformations are of the form:
21932 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21934 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21936 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21938 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
21939 Author: Jon Loeliger <jdl@jdl.com>
21940 Date: Mon Jun 11 19:02:34 2007 -0500
21942 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21944 This is a compatibility step that allows both the older form
21945 and the new form to co-exist for a while until the older can
21946 be removed entirely.
21948 All transformations are of the form:
21950 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21952 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21954 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21956 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
21957 Author: Jon Loeliger <jdl@jdl.com>
21958 Date: Mon Jun 11 19:02:20 2007 -0500
21960 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21962 This is a compatibility step that allows both the older form
21963 and the new form to co-exist for a while until the older can
21964 be removed entirely.
21966 All transformations are of the form:
21968 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21970 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21972 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21974 commit d5be43de93ff905c465e509d45a3164ef48d26e7
21975 Author: Jon Loeliger <jdl@jdl.com>
21976 Date: Mon Jun 11 19:02:10 2007 -0500
21978 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21980 This is a compatibility step that allows both the older form
21981 and the new form to co-exist for a while until the older can
21982 be removed entirely.
21984 All transformations are of the form:
21986 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
21988 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
21990 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21992 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
21993 Author: Jon Loeliger <jdl@jdl.com>
21994 Date: Mon Jun 11 19:02:05 2007 -0500
21996 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
21998 This is a compatibility step that allows both the older form
21999 and the new form to co-exist for a while until the older can
22000 be removed entirely.
22002 All transformations are of the form:
22004 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
22006 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
22008 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22010 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
22011 Author: Jon Loeliger <jdl@jdl.com>
22012 Date: Mon Jun 11 19:01:54 2007 -0500
22014 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
22016 This is a compatibility step that allows both the older form
22017 and the new form to co-exist for a while until the older can
22018 be removed entirely.
22020 All transformations are of the form:
22022 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
22024 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
22026 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22028 commit a76adc8142c1d956385a109e0b70f9319ede4d66
22029 Author: Jon Loeliger <jdl@jdl.com>
22030 Date: Mon Jun 11 19:01:43 2007 -0500
22032 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
22034 This is a compatibility step that allows both the older form
22035 and the new form to co-exist for a while until the older can
22036 be removed entirely.
22038 All transformations are of the form:
22040 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
22042 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
22044 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22046 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
22047 Author: Jon Loeliger <jdl@jdl.com>
22048 Date: Mon Jun 11 19:01:34 2007 -0500
22050 Introduce initial versions of new Command Config files.
22052 Derive three new files from cmd_confdefs.h:
22053 config_bootp.h - Has BOOTP related config options, not commands
22054 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
22055 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
22057 For now, include "config_bootp.h" for compatability until all
22058 users of it directly include it properly.
22060 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22062 commit 1f2a05898658900dc5717761e27abf2052e67e13
22063 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
22064 Date: Sat Jun 30 18:50:48 2007 +0200
22068 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
22070 commit a5d71e290f3673269be8eefb4ec44f53412f9461
22071 Author: Heiko Schocher <hs@pollux.denx.de>
22072 Date: Mon Jun 25 19:11:37 2007 +0200
22074 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
22076 Signed-off-by: Heiko Schocher <hs@denx.de>
22078 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
22079 Author: Niklaus Giger <niklaus.giger@nestal.com>
22080 Date: Mon Jun 25 17:03:13 2007 +0200
22082 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
22084 This patch prints the DDR status registers upon machine check
22085 interrupt on the 440EPx/GRx. This can be useful especially when
22086 ECC support is enabled.
22088 I added some small changes to the original patch from Niklaus to
22089 make it compile clean.
22091 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
22092 Signed-off-by: Stefan Roese <sr@denx.de>
22094 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
22095 Author: Niklaus Giger <niklaus.giger@nestal.com>
22096 Date: Mon Jun 25 16:50:55 2007 +0200
22098 ppc4xx: Fix O=buildir builds
22100 This patch fixes the problem to assemble cpu/ppc4xx/start.S
22101 experienced last week where building failed having specified
22102 O=../build.sequoia.
22104 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
22106 commit 466fff1a7bb5fe764a06450626f6098219f446b8
22107 Author: Stefan Roese <sr@denx.de>
22108 Date: Mon Jun 25 15:57:39 2007 +0200
22110 ppc4xx: Add pci_pre_init() for 405 boards
22112 This patch removes the CFG_PCI_PRE_INIT option completely, since
22113 it's not needed anymore with the patch from Matthias Fuchs with
22114 the "weak" pci_pre_init() implementation.
22116 Signed-off-by: Stefan Roese <sr@denx.de>
22118 commit 6f35c53166213c24a5a0e2390ed861136ff73870
22119 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
22120 Date: Sun Jun 24 17:41:21 2007 +0200
22122 ppc4xx: Maintenance patch for esd's CPCI405 derivats
22124 -add pci_pre_init() for pci interrupt fixup code
22125 -disable phy sleep mode via reset_phy() function
22126 -use correct io accessors
22129 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
22131 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
22132 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
22133 Date: Sun Jun 24 17:23:41 2007 +0200
22135 ppc4xx: Add pci_pre_init() for 405 boards
22137 This patch adds support for calling a plattform dependant
22138 pci_pre_init() function for 405 boards. This can be used to
22139 move the current pci_405gp_fixup_irq() function into the
22142 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
22143 A default function with 'weak' attribute is used when
22144 a board specific pci_pre_init() is not implemented.
22146 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
22148 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
22149 Author: Wolfgang Denk <wd@denx.de>
22150 Date: Fri Jun 22 23:59:00 2007 +0200
22152 Coding stylke cleanup; rebuild CHANGELOG
22154 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
22155 Author: Igor Lisitsin <igor@emcraft.com>
22156 Date: Wed Apr 18 14:55:19 2007 +0400
22158 Adapt log buffer code to support Linux 2.6
22160 A new environment variable, "logversion", selects the log buffer
22161 behaviour. If it is not set or set to a value other than 2, then the
22162 old, Linux 2.4.4, behaviour is selected.
22164 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
22167 commit a11e06965ec91270c51853407ff1261d3c740386
22168 Author: Igor Lisitsin <igor@emcraft.com>
22169 Date: Wed Mar 28 19:06:19 2007 +0400
22171 Extend POST support for PPC440
22173 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
22175 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
22178 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
22179 Author: Heiko Schocher <hs@pollux.denx.de>
22180 Date: Fri Jun 22 19:11:54 2007 +0200
22182 [PCS440EP] upgrade the PCS440EP board:
22183 - Show on the Status LEDs, some States of the board.
22184 - Get the MAC addresses from the EEProm
22186 - use the CF on the board.
22187 - check the U-Boot image in the Flash with a SHA1
22189 - use dynamic TLB entries generation for the SDRAM
22191 Signed-off-by: Heiko Schocher <hs@denx.de>
22193 commit 3a1f5c81b0b9557817a789bece839905581c2205
22194 Author: Stefan Roese <sr@denx.de>
22195 Date: Fri Jun 22 16:58:40 2007 +0200
22197 ppc4xx: Fix problem with extended program_tlb() funtion
22199 The recently extended program_tlb() function had a problem when
22200 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
22201 virtual address was not incremented. This patch fixes this issue
22202 and is tested on Katmai with 512MB SDRAM.
22204 Signed-off-by: Stefan Roese <sr@denx.de>
22206 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
22207 Author: Rafal Jaworowski <raj@semihalf.com>
22208 Date: Fri Jun 22 14:58:04 2007 +0200
22210 [ppc] Fix build breakage for all non-4xx PowerPC variants.
22212 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
22213 - minor 4xx cleanup
22215 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
22216 Author: Mike Frysinger <vapier@gentoo.org>
22217 Date: Fri Jun 22 10:34:12 2007 +0200
22219 [patch] add nand_init() prototype to nand.h
22221 since nand_init() is expected to be called by other parts of u-boot, there
22222 should be a prototype for it in nand.h
22224 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22225 Signed-off-by: Stefan Roese <sr@denx.de>
22227 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
22228 Author: Wolfgang Denk <wd@denx.de>
22229 Date: Wed Jun 20 18:14:24 2007 +0200
22231 Coding style cleanup. Refresh CHANGELOG.
22233 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
22234 Author: Stefan Roese <sr@denx.de>
22235 Date: Tue Jun 19 17:22:44 2007 +0200
22237 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
22239 This patch adds a board command to configure the I2C bootstrap EEPROM
22240 values. Right now 533 and 667MHz are supported for booting either via NOR
22241 or NAND FLASH. Here the usage:
22243 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
22244 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
22246 Signed-off-by: Stefan Roese <sr@denx.de>
22248 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
22249 Author: Stefan Roese <sr@denx.de>
22250 Date: Tue Jun 19 16:42:31 2007 +0200
22252 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
22254 The latest changes showed a problem with the location of the NAND-SPL
22255 image in the OCM and the init-data area (incl. cache). This patch
22256 fixes this problem.
22258 Signed-off-by: Stefan Roese <sr@denx.de>
22260 commit 86ba99e34194394052d24c04dc40d1263d29a26f
22261 Author: Stefan Roese <sr@denx.de>
22262 Date: Tue Jun 19 16:40:58 2007 +0200
22264 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
22266 Signed-off-by: Stefan Roese <sr@denx.de>
22268 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
22269 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22270 Date: Mon Jun 18 13:50:13 2007 -0500
22272 Added M5329AFEE and M5329BFEE Platforms
22274 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
22275 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
22276 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
22279 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
22280 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
22281 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
22282 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
22283 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
22284 lib_m68k/time.c, net/eth.c and rtc/Makefile
22286 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22288 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
22289 Author: Michal Simek <monstr@monstr.eu>
22290 Date: Sun Jun 17 19:04:11 2007 +0200
22292 [fix] email reparation
22294 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
22295 Author: Michal Simek <monstr@monstr.eu>
22296 Date: Sun Jun 17 19:03:21 2007 +0200
22298 [FIX] fix microblaze file permitission
22300 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
22301 Author: Stefan Roese <sr@denx.de>
22302 Date: Fri Jun 15 11:33:41 2007 +0200
22304 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
22306 Now CONFIG_440 has to be defined in all PPC440 board config files.
22308 Signed-off-by: Stefan Roese <sr@denx.de>
22310 commit efa35cf12d914d4caba942acd5a6c45f217de302
22311 Author: Grzegorz Bernacki <gjb@semihalf.com>
22312 Date: Fri Jun 15 11:19:28 2007 +0200
22314 ppc4xx: Clean up 440 exceptions handling
22316 - Introduced dedicated switches for building 440 and 405 images required
22317 for 440-specific machine instructions like 'rfmci' etc.
22319 - Exception vectors moved to the proper location (_start moved away from
22320 the critical exception handler space, which it occupied)
22322 - CriticalInput now serviced (with default handler)
22324 - MachineCheck properly serviced (added a dedicated handler and return
22327 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
22328 unhandled and those not relevant for 4xx were eliminated)
22330 - Eliminated Linux leftovers, removed dead code
22332 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
22333 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
22334 Signed-off-by: Stefan Roese <sr@denx.de>
22336 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
22337 Author: Stefan Roese <sr@denx.de>
22338 Date: Fri Jun 15 08:18:01 2007 +0200
22340 [ppc4xx] Add initial lwmon5 board support
22342 This patch adds initial support for the Liebherr lwmon5 board euqipped
22343 with an AMCC 440EPx PowerPC.
22345 Signed-off-by: Stefan Roese <sr@denx.de>
22347 commit 85f737376d5ff3d5f0d45a8b657686326d175307
22348 Author: Stefan Roese <sr@denx.de>
22349 Date: Fri Jun 15 07:39:43 2007 +0200
22351 [ppc4xx] Extend 44x GPIO setup with default output state
22353 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
22354 is extended with the default GPIO output state (level).
22356 Signed-off-by: Stefan Roese <sr@denx.de>
22358 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
22359 Author: Stefan Roese <sr@denx.de>
22360 Date: Thu Jun 14 11:14:32 2007 +0200
22362 [ppc4xx] Extend program_tlb() with virtual & physical addresses
22364 Now program_tlb() allows to program a TLB (or multiple) with
22365 different virtual and physical addresses. With this change, now one
22366 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
22367 diabled and once with caches enabled.
22369 Signed-off-by: Stefan Roese <sr@denx.de>
22371 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
22372 Author: Detlev Zundel <dzu@denx.de>
22373 Date: Wed May 23 19:02:41 2007 +0200
22375 Change 'repeatable' attribute of some commands to sensible values.
22377 Most prominently this changes 'erase' to be non-repeatable.
22379 Signed-off-by: Detlev Zundel <dzu@denx.de>
22381 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
22382 Author: Detlev Zundel <dzu@denx.de>
22383 Date: Wed May 23 18:47:48 2007 +0200
22385 Fix 'run' not to continue after interrupted command
22387 Signed-off-by: Detlev Zundel <dzu@denx.de>
22389 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
22390 Author: Jason Jin <Jason.jin@freescale.com>
22391 Date: Mon Jun 11 15:14:24 2007 +0200
22393 USB: This patch fix readl in ohci swap reg access.
22395 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
22397 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
22398 Author: Bartlomiej Sieka <tur@semihalf.com>
22399 Date: Fri Jun 8 14:52:22 2007 +0200
22401 TQM5200: Add Flat Device Tree support, update default env. accordingly.
22403 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
22404 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22406 commit 9045f33c023f698660a2e45d1b2194c0711abebc
22407 Author: Wolfgang Denk <wd@denx.de>
22408 Date: Fri Jun 8 10:24:58 2007 +0200
22410 Fix config problems on SC3 board; make ide_reset_timeout work.
22412 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
22413 Author: Benoît Monin <bmonin@adeneo.eu>
22414 Date: Fri Jun 8 09:55:24 2007 +0200
22416 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
22418 Set the correct value in GPIOx_TCR when configuring the gpio
22419 with CFG_440_GPIO_TABLE.
22421 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
22422 Signed-off-by: Stefan Roese <sr@denx.de>
22424 commit f539edc076cfe52bff919dd512ba8d7af0e22092
22425 Author: Vadim Bendebury <vbendeb@google.com>
22426 Date: Thu May 24 15:52:25 2007 -0700
22428 cosmetic changes to bcm570x driver
22430 This is a cosmetic only changes submission.
22431 It affects files relevant to bcm570x driver.
22432 the commands used to generate this change was
22435 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
22437 The BMW target (the only one using this chip so far) builds cleanly, the
22438 `before and after' generated object files for drivers/bcm570x.c and
22439 drivers/tigon3.o are identical as reported by objdump -d
22441 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
22442 Signed-off-by: Ben Warren <bwarren@qstreams.com>
22444 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
22445 Author: Wolfgang Denk <wd@denx.de>
22446 Date: Wed Jun 6 16:26:56 2007 +0200
22448 Coding Style cleanup; generate new CHANGELOG file.
22450 Signed-off-by: Wolfgang Denk <wd@denx.de>
22452 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
22453 Author: Markus Klotzbuecher <mk@denx.de>
22454 Date: Wed Jun 6 11:49:44 2007 +0200
22456 TRAB, USB: update trab board configuration for use of generic ohci driver
22458 commit dace45acd1c1357daa9322099d07c9a9e08b0024
22459 Author: Markus Klotzbuecher <mk@denx.de>
22460 Date: Wed Jun 6 11:49:43 2007 +0200
22462 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
22464 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
22465 Author: Markus Klotzbuecher <mk@denx.de>
22466 Date: Wed Jun 6 11:49:43 2007 +0200
22468 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
22470 commit fc43be478f2aa37ce38acd85355038866e4162af
22471 Author: Markus Klotzbuecher <mk@denx.de>
22472 Date: Wed Jun 6 11:49:35 2007 +0200
22474 USB/OHCI: endianness cleanup in the generic ohci driver
22476 commit c440bfe6d6d92d66478a7e84402b31f48413617b
22477 Author: Stefan Roese <sr@denx.de>
22478 Date: Wed Jun 6 11:42:13 2007 +0200
22480 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
22482 This patch adds NAND booting support for the AMCC Acadia eval board.
22484 Please make sure to configure jumper J7 to position 2-3 when booting
22485 from NOR, and to position 1-2 when booting for NAND.
22487 I also added a board command to configure the I2C bootstrap EEPROM
22488 values. Right now only 267MHz is support for booting either via NOR
22489 or NAND FLASH. Here the usage:
22491 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
22492 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
22494 Signed-off-by: Stefan Roese <sr@denx.de>
22496 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
22497 Author: Rodolfo Giometti <giometti@linux.it>
22498 Date: Wed Jun 6 10:08:14 2007 +0200
22500 Files include/linux/byteorder/{big,little}_endian.h define
22501 __BIG_ENDIAN and __LITTLE_ENDIAN.
22503 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
22505 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
22506 Author: Zhang Wei <wei.zhang@freescale.com>
22507 Date: Wed Jun 6 10:08:14 2007 +0200
22509 Add USB PCI-OHCI, USB keyboard and event poll support to the
22510 MPC8641HPCN board config file.
22512 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
22514 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
22515 Author: Zhang Wei <wei.zhang@freescale.com>
22516 Date: Wed Jun 6 10:08:14 2007 +0200
22518 USB PCI-OHCI, interrupt pipe and usb event poll support
22520 This patch added USB PCI-OHCI chips support, interrupt pipe support
22521 and usb event poll support. For supporting the USB interrupt pipe, the
22522 globe urb_priv is moved to purb in ed struct. Now, we can process
22523 several urbs at one time. The interrupt pipe support codes are ported
22524 from Linux kernel 2.4.
22526 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
22528 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
22529 Author: Zhang Wei <wei.zhang@freescale.com>
22530 Date: Wed Jun 6 10:08:13 2007 +0200
22532 USB event poll support
22534 This patch adds USB event poll support, which could be used in usbkbd
22535 and other usb devices driver when the asynchronous interrupt
22536 processing is supported.
22538 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
22540 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
22541 Author: Rodolfo Giometti <giometti@linux.it>
22542 Date: Wed Jun 6 10:08:12 2007 +0200
22544 ISP116x: delay for crappy USB keys
22546 Using some (very) slow USB keys cause the USB host controller buffers
22547 are not ready to be read by the CPU so we need an extra delay before
22548 reading the USB storage data.
22550 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
22552 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
22553 Author: Markus Klotzbuecher <mk@denx.de>
22554 Date: Wed Jun 6 10:08:12 2007 +0200
22556 Change duplicate usb_cpu_init_fail to usb_board_init_fail
22558 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
22561 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
22563 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
22564 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
22565 Date: Tue Jun 5 12:30:52 2007 -0500
22567 mpc8641 image size cleanup
22569 e600 does not have a bootpg restriction.
22570 Move the version string to beginning of image at fff00000.
22571 Resetvec.S is not needed.
22572 Update flash copy instructions.
22573 Add tftpflash env variable
22575 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22576 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22578 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
22579 Author: Benoît Monin <bmonin@adeneo.eu>
22580 Date: Mon Jun 4 08:36:05 2007 +0200
22582 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
22584 The attached patch is mainly cosmetic, allowing u-boot to
22585 display the correct bootstrap option letter according to the
22588 The original patch was extended with 405EZ support by Stefan
22591 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
22592 Signed-off-by: Stefan Roese <sr@denx.de>
22594 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
22595 Author: Nikita V. Youshchenko <yoush@debian.org>
22596 Date: Wed May 23 12:45:19 2007 +0400
22598 fix compilation problem for mpc8349itx CFG_RAMBOOT
22600 Current include/configs/MPC8349ITX.h does contain some support for building
22601 image that will be started from memory (without putting in into flash).
22602 It could be triggered by building with TEXT_BASE set to a low value.
22604 However, this support is incomplete: using of low TEXT_BASE causes
22605 defining configuration macros in inconsistent way, which later leads
22606 to compilation errors. In particular. flash support is being disabled,
22607 but then flash structures get referenced.
22609 This patch fixes this, making it possible to build with low TEXT_BASE.
22611 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
22613 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22615 commit 8a364f0970de49949d635e60accf463c6443ef8c
22616 Author: Nikita V. Youshchenko <yoush@debian.org>
22617 Date: Wed May 23 12:45:25 2007 +0400
22619 add missing 'console' var to default mpc8349itx config
22621 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22623 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
22624 Author: Stefan Roese <sr@denx.de>
22625 Date: Fri Jun 1 16:18:17 2007 +0200
22627 ppc4xx: Add missing file for Bamboo NAND booting support
22629 Signed-off-by: Stefan Roese <sr@denx.de>
22631 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
22632 Author: Stefan Roese <sr@denx.de>
22633 Date: Fri Jun 1 15:58:19 2007 +0200
22635 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
22637 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
22638 suggested by AMCC it is not recommended to dynamically change the EBC
22639 speed after bootup. So we undo this change to be on the safe side.
22641 Signed-off-by: Stefan Roese <sr@denx.de>
22643 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
22644 Author: Stefan Roese <sr@denx.de>
22645 Date: Fri Jun 1 15:29:04 2007 +0200
22647 ppc4xx: Update Sequoia NAND booting support with ECC
22649 Signed-off-by: Stefan Roese <sr@denx.de>
22651 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
22652 Author: Stefan Roese <sr@denx.de>
22653 Date: Fri Jun 1 15:27:11 2007 +0200
22655 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
22657 This patch adds NAND booting support for the AMCC Bamboo eval board.
22658 Since the NAND-SPL boot image is limited to 4kbytes, this version
22659 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
22660 supported, since the setup code for I2C DIMM autodetection and
22661 configuration is too big for this NAND bootloader.
22663 Signed-off-by: Stefan Roese <sr@denx.de>
22665 commit 42be56f53c8b107868e6125c8524ae84293e95a7
22666 Author: Stefan Roese <sr@denx.de>
22667 Date: Fri Jun 1 15:23:04 2007 +0200
22669 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
22671 The U-Boot NAND booting support is now extended to support ECC
22672 upon loading of the NAND U-Boot image.
22674 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
22676 Signed-off-by: Stefan Roese <sr@denx.de>
22678 commit a471db07fbb65a841ffc9f4f112562b945230f98
22679 Author: Stefan Roese <sr@denx.de>
22680 Date: Fri Jun 1 15:19:29 2007 +0200
22682 ppc4xx: Prepare Bamboo port for NAND booting support
22684 This patch updates the "normal" Bamboo NOR booting port, so
22685 that it is compatible with the coming soon NAND booting
22688 It also enables the 2nd NAND flash on the Bamboo.
22690 Signed-off-by: Stefan Roese <sr@denx.de>
22692 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
22693 Author: Stefan Roese <sr@denx.de>
22694 Date: Fri Jun 1 15:16:58 2007 +0200
22696 ppc4xx: Update in_be32() functions and friends to latest Linux version
22698 Signed-off-by: Stefan Roese <sr@denx.de>
22700 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
22701 Author: Stefan Roese <sr@denx.de>
22702 Date: Fri Jun 1 15:15:12 2007 +0200
22704 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
22706 This patch adds hardware ECC support to the NDFC driver. It also
22707 changes the register access from using the "simple" in32/out32
22708 functions to the in_be32/out_be32 functions, which make sure
22709 that the access is correctly synced. This is the only recommended
22710 access to SoC registers in the current Linux kernel.
22712 Signed-off-by: Stefan Roese <sr@denx.de>
22714 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
22715 Author: Stefan Roese <sr@denx.de>
22716 Date: Fri Jun 1 15:12:15 2007 +0200
22718 NAND: Update nand_ecc.c to latest Linux version
22720 This patch updates the nand_ecc code to the latest Linux version.
22721 The main reason for this is the more compact code. This makes
22722 it possible to include the ECC code into the NAND bootloader
22723 image (NAND_SPL) for PPC4xx.
22725 Signed-off-by: Stefan Roese <sr@denx.de>
22727 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
22728 Author: Stefan Roese <sr@denx.de>
22729 Date: Fri Jun 1 15:09:50 2007 +0200
22731 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
22733 Signed-off-by: Stefan Roese <sr@denx.de>
22735 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
22736 Author: Stefan Roese <sr@denx.de>
22737 Date: Fri Jun 1 13:45:24 2007 +0200
22739 ppc4xx: Change Luan config file to support ECC
22741 With the updated 44x DDR2 driver the Luan board now supports
22742 ECC generation and checking.
22744 Signed-off-by: Stefan Roese <sr@denx.de>
22746 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
22747 Author: Stefan Roese <sr@denx.de>
22748 Date: Fri Jun 1 13:45:00 2007 +0200
22750 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
22752 Add config option for 180 degree advance clock control as needed
22753 for the AMCC Luan eval board.
22755 Signed-off-by: Stefan Roese <sr@denx.de>
22757 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
22758 Author: Wolfgang Denk <wd@denx.de>
22759 Date: Thu May 31 17:20:09 2007 +0200
22761 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
22763 Signed-off-by: Wolfgang Denk <wd@denx.de>
22765 commit 7049288fb1f16f1b317140226cdebd07bd416395
22766 Author: Bartlomiej Sieka <tur@semihalf.com>
22767 Date: Sun May 27 17:26:46 2007 +0200
22769 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
22771 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
22773 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
22774 Author: Bartlomiej Sieka <tur@semihalf.com>
22775 Date: Sun May 27 17:06:36 2007 +0200
22777 Motion-PRO: Add support for redundant environment.
22779 Enable redundant environment, add a MTD partition for it; also add env.
22780 variable command for passing MTD partitions to the kernel command line.
22782 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
22783 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22785 commit a26eabeec31746f06d309103690892805696e344
22786 Author: Bartlomiej Sieka <tur@semihalf.com>
22787 Date: Sun May 27 17:05:11 2007 +0200
22789 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
22791 Allow passing longer command line to the kernel - useful especially
22792 for passing MTD partition layout.
22794 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
22795 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22797 commit 9160b96f71483a116de81c68985e8ee306d36764
22798 Author: Bartlomiej Sieka <tur@semihalf.com>
22799 Date: Sun May 27 17:04:18 2007 +0200
22801 Fix: Add missing NULL termination in strings expanded by macros parser.
22803 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
22804 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22806 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
22807 Author: Bartlomiej Sieka <tur@semihalf.com>
22808 Date: Sun May 27 17:03:37 2007 +0200
22810 Motion-PRO: Update EEPROM's page write bits and write delay.
22812 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
22813 have a page write capability of two bytes", and "This device offers fast (1ms)
22814 byte write". Add 3ms of extra delay.
22816 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
22817 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22819 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
22820 Author: Bartlomiej Sieka <tur@semihalf.com>
22821 Date: Sun May 27 16:58:45 2007 +0200
22823 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
22825 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
22826 networking does not function. This commit switches PHY to TX mode by clearing
22827 the FX_SEL bit of Mode Control Register. It also reverses commit
22828 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
22830 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
22831 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22833 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
22834 Author: Bartlomiej Sieka <tur@semihalf.com>
22835 Date: Sun May 27 16:57:15 2007 +0200
22837 Motion-PRO: Add support for the temperature sensor.
22839 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
22840 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22842 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
22843 Author: Bartlomiej Sieka <tur@semihalf.com>
22844 Date: Sun May 27 16:55:23 2007 +0200
22846 Motion-PRO: Add displaying of CPLD revision information during boot.
22848 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
22849 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22851 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
22852 Author: Bartlomiej Sieka <tur@semihalf.com>
22853 Date: Sun May 27 16:53:43 2007 +0200
22855 MPC5xxx: Change names of defines related to IPB and PCI clocks.
22857 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
22858 them does not cause PCI or IPB clocks to run at the specified speed.
22859 Instead, they configure divisors used to calculate said clocks. This
22860 patch renames the defines according to their real function.
22862 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
22863 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22865 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
22866 Author: Bartlomiej Sieka <tur@semihalf.com>
22867 Date: Sun May 27 16:51:48 2007 +0200
22869 Motion-PRO: Add LED support.
22871 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
22872 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22873 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22875 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
22876 Author: Ulf Samuelsson <ulf@atmel.com>
22877 Date: Thu May 24 12:12:47 2007 +0200
22879 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
22881 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
22882 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
22883 Signed-off-by: Stefan Roese <sr@denx.de>
22885 commit d756894722c888d09a9fa1df8323753772d3dcce
22886 Author: Stefan Roese <sr@denx.de>
22887 Date: Thu May 24 09:49:00 2007 +0200
22889 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
22891 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
22892 fixes a small bug in the 405EZ OCM initialization. Thanks for
22895 Signed-off-by: Stefan Roese <sr@denx.de>
22897 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
22898 Author: Stefan Roese <sr@denx.de>
22899 Date: Thu May 24 08:22:09 2007 +0200
22901 ppc4xx: Update AMCC Acadia support for board revision 1.1
22903 This patch updates the Acadia (405EZ) support for the new 1.1 board
22904 revision. It also adds support for NAND FLASH via the 4xx NDFC.
22906 Please note that the jumper J7 must be in position 2-3 for this
22907 NAND support. Position 1-2 is for NAND booting only. NAND booting
22908 support will follow later.
22910 Signed-off-by: Stefan Roese <sr@denx.de>
22912 commit 822d55365bb557e084d0e33625a6dedcc866110b
22913 Author: Jon Loeliger <jdl@freescale.com>
22914 Date: Wed May 23 14:09:46 2007 -0500
22916 Add LIST_86xx MAKEALL target for PowerPC builds.
22918 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22920 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
22921 Author: Stefan Roese <sr@denx.de>
22922 Date: Tue May 22 12:48:09 2007 +0200
22924 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
22926 Signed-off-by: Stefan Roese <sr@denx.de>
22928 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
22929 Author: Stefan Roese <sr@denx.de>
22930 Date: Tue May 22 12:46:10 2007 +0200
22932 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
22934 This patch adds support for 405 PPC's to the 4xx NAND driver
22935 ndfc.c. This is in preparation for the new AMCC 405EZ.
22937 Signed-off-by: Stefan Roese <sr@denx.de>
22939 commit 10603d76767426be803dadd4fb688b97eb69481c
22940 Author: Stefan Roese <sr@denx.de>
22941 Date: Mon May 21 07:41:22 2007 +0200
22943 ppc4xx: Fix problem in 405EZ OCM initialization
22945 As spotted by Bruce Adler this patch fixes an initialization problem
22948 Signed-off-by: Stefan Roese <sr@denx.de>
22950 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
22951 Author: Peter Pearse <peter.pearse@arm.com>
22952 Date: Fri May 18 16:47:03 2007 +0100
22954 Reduce line lengths to 80 characters max.
22956 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
22957 Author: Peter Pearse <peter.pearse@arm.com>
22958 Date: Fri May 18 14:34:07 2007 +0100
22960 Makefile permissions
22962 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
22963 Author: Peter Pearse <peter.pearse@arm.com>
22964 Date: Fri May 18 14:33:11 2007 +0100
22966 Makefile permissions
22968 commit 255a3577c848706441daee0174543efe205a77f8
22969 Author: Kim Phillips <kim.phillips@freescale.com>
22970 Date: Wed May 16 16:52:19 2007 -0500
22972 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
22974 For all practical u-boot purposes, TSECs don't differ throughout the
22975 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
22977 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22979 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
22980 Author: Stefano Babic <sbabic@denx.de>
22981 Date: Wed May 16 14:49:12 2007 +0200
22983 Fix compile problem cause my Microblaze merge
22985 Signed-off-by: Stefano Babic <sbabic@denx.de>
22987 commit ada4697d0230d6da552867777f98a67ec3ba2579
22988 Author: Jeffrey Mann <mannj@embeddedplanet.com>
22989 Date: Wed May 16 13:23:10 2007 +0200
22991 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
22993 Because the Sequoia board does not boot with an EBC faster than 66MHz,
22994 the clock divider are changed after the initial boot process.
22996 This allows for maximum clocking speeds to be achieved on newer boards.
22997 Sequoia boards with 666.66 MHz processors require that the EBC divider
22998 be set to 3 in order to start the initial boot process at a slower EBC
22999 speed. After the initial boot process, the divider can be set back to 2,
23000 which will cause the boards to run at 83.333MHz. This is backward
23001 compatible with boards with 533.33 MHz processors, as these boards will
23002 already be set with an EBC divider of 2.
23004 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
23006 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
23007 Author: Wolfgang Denk <wd@denx.de>
23008 Date: Wed May 16 01:16:53 2007 +0200
23010 Minor Coding Style cleanup, update CHANGELOG.
23012 Signed-off-by: Wolfgang Denk <wd@denx.de>
23014 commit d62f64cc23a940eafe712c776b3249e4160753d1
23015 Author: Wolfgang Denk <wd@denx.de>
23016 Date: Wed May 16 00:13:33 2007 +0200
23018 Coding Style Cleanup, new CHANGELOG
23020 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
23021 Author: Wolfgang Denk <wd@denx.de>
23022 Date: Tue May 15 23:38:05 2007 +0200
23024 Minor coding style cleanup.
23026 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
23027 Author: mushtaq khan <mushtaq_k@procsys.com>
23028 Date: Fri Apr 20 14:23:02 2007 +0530
23030 Add driver for S-ATA-controller on Intel processors with South
23031 Bridge, ICH-5, ICH-6 and ICH-7.
23035 1. Code is divided in to two files. All functions, which are
23036 controller specific are kept in "drivers/ata_piix.c" file and
23037 functions, which are not controller specific, are kept in
23038 "common/cmd_sata.c" file.
23040 2. Reading and Writing from the S-ATA drive is done using PIO method.
23042 3. Driver can be configured for 48-bit addressing by defining macro
23043 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
23046 4. S-ATA read function is hooked to the File system, commands like
23047 ext2ls and ext2load file can be used. This has been tested.
23049 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
23050 controller and identifies the S-ATA drives connected to it.
23052 6. U-Boot command "sata" is added, which is used to read/write, print
23053 partition table and get info about the drives present. This I have
23054 implemented in same way as "ide" command is implemented in U-Boot.
23056 7. This driver is for S-ATA in native mode.
23058 8. This driver does not support the Native command queuing and
23061 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
23063 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
23064 Author: mushtaq khan <mushtaq_k@procsys.com>
23065 Date: Mon Apr 30 15:57:22 2007 +0530
23067 Fixes bug clearing the bss section for i386
23070 There is a bug in the code of clearing the bss section for processor
23071 i386.(File: cpu/i386/start.S)
23072 In the code, bss_start addr (starting addr of bss section) is put into
23073 the register %eax, but the code which clears the bss section refers to
23074 the addr pointed by %edi.
23076 This patch fixes this bug by putting bss_start into %edi register.
23078 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
23080 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
23081 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
23082 Date: Mon Apr 30 16:47:28 2007 -0500
23084 Add support for BCM5464 Quad Phy
23086 Added support for Broadcom's BCM5464 Quad Phy
23088 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
23090 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
23091 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
23092 Date: Wed May 9 08:10:57 2007 +0800
23094 Search the exception table with linear algorithm
23096 Search the exception table with linear algorithm instead of
23097 bisecting algorithm.
23098 Because the exception table might be unsorted.
23100 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
23102 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
23103 Author: Aubrey.Li <aubrey.adi@gmail.com>
23104 Date: Mon May 14 11:47:35 2007 +0800
23106 Fix compilation issues on MACOSX
23108 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
23109 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
23111 commit 56fd7162985c412317bbf763a225fba23c64fd31
23112 Author: Stephen Williams <steve@icarus.com>
23113 Date: Tue May 15 07:55:42 2007 -0700
23115 Fix for compile of JSE target
23117 The attached patch fixes the compile of the JSE board in the
23118 denx git as of 14 may 2007. It is an extremely simple patch,
23119 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
23121 Fix to compile JSE against 20070514 git of u-boot
23123 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
23124 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
23125 Date: Sun May 13 21:01:03 2007 +0900
23127 sh: MS7750SE support.
23129 This adds support for the Hitachi MS7750SE.
23131 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23133 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
23134 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
23135 Date: Sun May 13 20:58:00 2007 +0900
23137 sh: First support code of SuperH.
23139 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23141 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
23142 Author: Stefan Roese <sr@denx.de>
23143 Date: Fri May 11 12:01:49 2007 +0200
23145 ppc4xx: Add mtcpr/mfcpr access macros
23147 Signed-off-by: Stefan Roese <sr@denx.de>
23149 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
23150 Author: Stefan Roese <sr@denx.de>
23151 Date: Fri May 11 12:01:06 2007 +0200
23153 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
23155 Signed-off-by: Stefan Roese <sr@denx.de>
23157 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
23158 Author: Piotr Kruszynski <ppk@semihalf.com>
23159 Date: Thu May 10 16:55:52 2007 +0200
23161 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
23164 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
23165 Author: Peter Pearse <peter.pearse@arm.com>
23166 Date: Wed May 9 11:42:44 2007 +0100
23168 Add the board directory for SMN42
23170 commit 160131bf965785419626df6c388729fe0b597992
23171 Author: Peter Pearse <peter.pearse@arm.com>
23172 Date: Wed May 9 11:41:58 2007 +0100
23174 Add the files for the SMN42 board
23176 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
23177 Author: Peter Pearse <peter.pearse@arm.com>
23178 Date: Wed May 9 11:40:34 2007 +0100
23180 Remove the deleted files for the SMN42 patch
23182 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
23183 Author: Peter Pearse <peter.pearse@arm.com>
23184 Date: Wed May 9 11:37:56 2007 +0100
23186 New board SMN42 branch
23188 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
23189 Author: Peter Pearse <peter.pearse@arm.com>
23190 Date: Wed May 9 10:24:38 2007 +0100
23192 Makefile permissions
23194 commit b84289b595731e8851df46e893845cc1322c9b9b
23195 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
23196 Date: Tue May 8 14:17:07 2007 -0500
23198 8641hpcn: Fix Makefile after moving pixis to board/freescale.
23200 The OBJTREE != SRCTREE build scenario was broken.
23203 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23204 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23206 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
23207 Author: Michal Simek <monstr@monstr.eu>
23208 Date: Tue May 8 15:57:43 2007 +0200
23210 add: reading special purpose registers
23212 commit 1a50f164beb065f360fbddb76029607d6b099698
23213 Author: Michal Simek <monstr@monstr.eu>
23214 Date: Tue May 8 14:52:52 2007 +0200
23216 add: Microblaze V5 exception handling
23218 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
23219 Author: Michal Simek <monstr@monstr.eu>
23220 Date: Tue May 8 14:39:11 2007 +0200
23222 add: FSL control read and write
23224 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
23225 Author: Piotr Kruszynski <ppk@semihalf.com>
23226 Date: Tue May 8 13:05:44 2007 +0200
23228 [Motion-PRO] Add support for I2C, EEPROM and RTC.
23230 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
23231 Author: Bartlomiej Sieka <tur@semihalf.com>
23232 Date: Tue May 8 10:23:56 2007 +0200
23234 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
23237 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
23238 Author: Bartlomiej Sieka <tur@semihalf.com>
23239 Date: Tue May 8 09:39:12 2007 +0200
23241 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
23242 eliminates networking problems in Linux (timeouts).
23244 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
23245 Author: Bartlomiej Sieka <tur@semihalf.com>
23246 Date: Tue May 8 09:21:57 2007 +0200
23248 [Motion-PRO] Enable Flat Device Tree support and modify default environment
23249 to allow booting of FDT-expecting kernels.
23251 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
23252 Author: Michal Simek <monstr@monstr.eu>
23253 Date: Mon May 7 23:58:31 2007 +0200
23255 new: USE_MSR_INTR support
23257 commit 008861a2f3ef2c062744d733787c7e530a1b8761
23258 Author: Bartlomiej Sieka <tur@semihalf.com>
23259 Date: Mon May 7 22:36:15 2007 +0200
23261 [MPC5xxx] There are networking problems on the Motion-PRO board with
23262 current PHY initalization code (tftp timeouts all the time). This commit
23263 temporarily disables PHY initalization sequence to make the networking
23264 operational, until a fix is found.
23266 commit abca901869c3760b6c5fecb825db6c1d91a78a93
23267 Author: Wolfgang Denk <wd@denx.de>
23268 Date: Mon May 7 22:10:36 2007 +0200
23270 Get rid of duplicated file (see include/configs/sbc8560.h instead)
23272 Signed-off-by: Wolfgang Denk <wd@denx.de>
23274 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
23275 Author: Wolfgang Denk <wd@denx.de>
23276 Date: Mon May 7 22:07:08 2007 +0200
23278 Get rid of duplicated file (see doc/README.SBC8560 instead)
23280 Signed-off-by: Wolfgang Denk <wd@denx.de>
23282 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
23283 Author: Michal Simek <monstr@monstr.eu>
23284 Date: Mon May 7 19:43:10 2007 +0200
23286 fix: read and write MSR - repair number of parameters
23288 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
23289 Author: Jeffrey Mann <mannj@embeddedplanet.com>
23290 Date: Mon May 7 19:42:49 2007 +0200
23292 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
23294 A '3' got cut off in the formatting of the last patch to automatically
23295 change the clock speed of the system clock on sequoia board.
23297 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
23298 Signed-off-by: Stefan Roese <sr@denx.de>
23300 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
23301 Author: Michal Simek <monstr@monstr.eu>
23302 Date: Mon May 7 19:33:51 2007 +0200
23304 new: fsl interrupt support
23305 FSL_Has_data is connected to INTC.
23307 commit 792032baa7d625e34c981ab6df521911bd8dc861
23308 Author: Michal Simek <monstr@monstr.eu>
23309 Date: Mon May 7 19:30:12 2007 +0200
23311 fix: interrupt handler
23314 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
23315 Author: Michal Simek <monstr@monstr.eu>
23316 Date: Mon May 7 19:25:08 2007 +0200
23318 fix: remove asm code
23320 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
23321 Author: Michal Simek <monstr@monstr.eu>
23322 Date: Mon May 7 19:12:43 2007 +0200
23324 fix: clean interrupt
23326 commit 42efed6130c8fcf7da881385b5427065d2801757
23327 Author: Michal Simek <monstr@monstr.eu>
23328 Date: Mon May 7 17:22:25 2007 +0200
23330 fix: interrupt handler for multiple sources
23332 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
23333 Author: Michal Simek <monstr@monstr.eu>
23334 Date: Mon May 7 17:11:09 2007 +0200
23336 new: add writing to msr register
23338 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
23339 Author: Markus Klotzbuecher <mk@denx.de>
23340 Date: Mon May 7 16:43:56 2007 +0200
23342 Fix an ancient CHANGELOG conflict
23344 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
23345 Author: Timur Tabi <timur@freescale.com>
23346 Date: Sat May 5 08:12:30 2007 +0200
23348 5xxx: write MAC address to mac-address and local-mac-address
23350 Some device trees have a mac-address property, some have local-mac-address,
23351 and some have both. To support all of these device trees, ftp_cpu_setup()
23352 should write the MAC address to mac-address and local-mac-address, if they
23355 Signed-off-by: Timur Tabi <timur@freescale.com>
23356 Acked-by: Grant Likely <grant.likely@secretlab.ca>
23358 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
23359 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
23360 Date: Sun Apr 29 14:01:54 2007 +0200
23362 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
23364 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
23365 message. Use PVR to distinguish between the two variants, and print proper CPU
23368 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
23369 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
23370 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
23372 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
23373 Author: Ladislav Michl <ladis@linux-mips.org>
23374 Date: Wed Apr 25 16:01:26 2007 +0200
23376 [PATCH] simplify silent console
23378 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
23379 Acked-by: Stefan Roese <sr@denx.de>
23381 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
23382 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
23383 Date: Mon Apr 23 15:30:39 2007 +0200
23385 [PATCH] Avoid assigning PCI resources from zero address
23387 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
23388 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
23389 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
23390 sentence about "0" being considered an invalid address) -- so, use a reasonable
23391 starting value of 0x1000 (that's what the most Linux archs are using).
23393 Alternatively, one might have fixed the calls to pci_set_region() individually
23394 (some code even seems to have taken care of this issue) but that would have
23395 been a lot more work. :-)
23397 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
23398 Acked-by: Stefan Roese <sr@denx.de>
23400 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
23401 Author: Jeffrey Mann <mannj@embeddedplanet.com>
23402 Date: Mon Apr 23 14:00:11 2007 +0200
23404 [patch] setenv(...) can delete environmentalvariables
23406 update setenv() function so that entering a NULL value for the
23407 variable's value will delete the environmental variable
23409 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
23410 Acked-by: Stefan Roese <sr@denx.de>
23412 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
23413 Author: Mike Frysinger <vapier@gentoo.org>
23414 Date: Mon Apr 23 13:54:24 2007 +0200
23416 [patch] use unsigned char in smc91111 driver for mac
23418 the v_mac variable in the smc91111 driver is declared as a signed char ...
23419 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
23420 because when it gets printed out, you get a display like:
23421 0xFFFFFFE0 and that's no good
23423 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
23425 commit ffc50f9bb194343c6303517a517708457a5eb6b8
23426 Author: Michal Simek <monstr@monstr.eu>
23427 Date: Sat May 5 18:54:42 2007 +0200
23429 new: FSL and MSR support #2
23431 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
23432 Author: Michal Simek <monstr@monstr.eu>
23433 Date: Sat May 5 18:27:16 2007 +0200
23435 new: FSL and MSR support
23437 commit 2f15278c2eb911c668b4fe562130b78cf554d139
23438 Author: Wolfgang Denk <wd@denx.de>
23439 Date: Sat May 5 18:23:11 2007 +0200
23441 Coding stylke cleanup; update CHANGELOG.
23443 Signed-off-by: Wolfgang Denk <wd@denx.de>
23445 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
23446 Author: Wolfgang Denk <wd@denx.de>
23447 Date: Sat May 5 18:05:02 2007 +0200
23449 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
23451 Signed-off-by: Wolfgang Denk <wd@denx.de>
23453 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
23454 Author: Wolfgang Denk <wd@denx.de>
23455 Date: Sat May 5 17:15:50 2007 +0200
23457 Make "file" command happy with some config.mk files; update CHANGELOG
23459 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
23460 Author: Jeffrey Mann <mannj@embeddedplanet.com>
23461 Date: Sat May 5 08:32:14 2007 +0200
23463 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
23465 The AMCC Secquoia board has been changed in a new revision from using a
23466 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
23467 indicates the difference. This patch reads that bit and uses the correct
23468 clock speed for the board. This code is backward compatable will all
23469 prior boards. All prior boards will be read as 33.000.
23471 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
23472 Signed-off-by: Stefan Roese <sr@denx.de>
23474 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
23475 Author: Stefan Roese <sr@denx.de>
23476 Date: Sat May 5 08:29:01 2007 +0200
23478 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
23480 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
23481 for the 4k NAND boot image so define bus_frequency to 133MHz here
23482 which is save for the refresh counter setup.
23484 Signed-off-by: Stefan Roese <sr@denx.de>
23486 commit 2f550ab976405300f5b07bf2890800840d0aa05f
23487 Author: Timur Tabi <timur@freescale.com>
23488 Date: Sat May 5 08:12:30 2007 +0200
23490 5xxx: write MAC address to mac-address and local-mac-address
23492 Some device trees have a mac-address property, some have local-mac-address,
23493 and some have both. To support all of these device trees, ftp_cpu_setup()
23494 should write the MAC address to mac-address and local-mac-address, if they
23497 Signed-off-by: Timur Tabi <timur@freescale.com>
23498 Acked-by: Grant Likely <grant.likely@secretlab.ca>
23500 commit a79886590593ba1d667c840caa4940c61639f18f
23501 Author: Thomas Knobloch <knobloch@siemens.com>
23502 Date: Sat May 5 07:04:42 2007 +0200
23504 NAND: Wrong calculation of page number in nand_block_bad()
23506 In case that there is no memory based bad block table available the
23507 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
23508 nand_block_bad() directly. When parameter 'getchip' is set to zero,
23509 nand_block_bad() will not right shift the offset to calculate the
23510 correct page number.
23512 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
23513 Signed-off-by: Stefan Roese <sr@denx.de>
23515 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
23516 Author: Wolfgang Denk <wd@denx.de>
23517 Date: Fri May 4 10:02:33 2007 +0200
23519 Fix initrd length corruption in bootm command.
23521 When using FDT Images, the length of an inital ramdisk was
23522 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
23524 Patches by Timur Tabi & Johns Daniel.
23526 Signed-off-by: Wolfgang Denk <wd@denx.de>
23528 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
23529 Author: Kim Phillips <kim.phillips@freescale.com>
23530 Date: Thu May 3 19:43:52 2007 -0500
23532 mpc83xx: fix trivial error in MAKEALL
23534 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23536 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
23537 Author: Wolfgang Denk <wd@denx.de>
23538 Date: Thu May 3 16:34:41 2007 +0200
23540 Update board configuration for STX GP3SSA board:
23542 Enable hush shell, environment in flash rather in EEPROM,
23543 more user-friendly default environment, etc.
23544 The simple EEPROM environment can be selected easily in the board
23547 Signed-off-by: Wolfgang Denk <wd@denx.de>
23549 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
23550 Author: Wolfgang Denk <wd@denx.de>
23551 Date: Tue Apr 24 14:37:49 2007 +0200
23553 Cleanup STX GP3SSA code; fix build and compile problems.
23555 commit 35171dc04e028ecacc23ad916a66295472555dbf
23556 Author: Dan Malek <dan@embeddedalley.com>
23557 Date: Fri Jan 5 09:15:34 2007 +0100
23559 Add support for STX GP3SSA (stxssa) Board
23561 Signed-off-by Dan Malek, <dan@embeddedalley.com>
23563 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
23564 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
23565 Date: Wed May 2 13:31:53 2007 +0200
23567 macb: Don't restart autonegotiation if we already have link
23569 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
23570 link is already up.
23572 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
23574 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
23575 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
23576 Date: Wed May 2 13:22:38 2007 +0200
23578 macb: Introduce a few barriers when dealing with DMA descriptors
23580 There were a few theoretical possibilities that the compiler might
23581 optimize away DMA descriptor reads and/or writes and thus cause
23582 synchronization problems with the hardware. Insert barriers where
23583 we depend on reads/writes actually hitting memory.
23585 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
23587 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
23588 Author: Andy Fleming <afleming@freescale.com>
23589 Date: Sat Feb 24 01:08:13 2007 -0600
23591 Cleaned up some 85xx PCI bugs
23593 * Cleaned up the CDS PCI Config Tables and added NULL entries to
23595 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
23596 * Fixed 85xx PCI code to assign powar region sizes based on the
23597 config values (rather than hard-coding them)
23598 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
23600 Signed-off-by: Andy Fleming <afleming@freescale.com>
23602 commit 6743105988fc44d5b0d30388c790607835aae7a6
23603 Author: Andy Fleming <afleming@freescale.com>
23604 Date: Mon Apr 23 02:54:25 2007 -0500
23606 Add support for the 8568 MDS board
23608 This included some changes to common files:
23609 * Add 8568 processor SVR to various places
23610 * Add support for setting the qe bus-frequency value in the dts
23611 * Add the 8568MDS target to the Makefile
23613 Signed-off-by: Andy Fleming <afleming@freescale.com>
23615 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
23616 Author: David Updegraff <dave@cray.com>
23617 Date: Fri Apr 20 14:34:48 2007 -0500
23619 Add support for treating unknown PHYs as generic PHYs.
23621 When bringing up u-boot on new boards, PHY support sometimes gets
23622 neglected. Most PHYs don't really need any special support,
23623 though. By adding a generic entry that always matches if nothing
23624 else does, we can provide support for "unsupported" PHYs for the
23627 The generic PHY driver supports most PHYs, including gigabit.
23629 Signed-off-by: David Updegraff <dave@cray.com>
23630 Signed-off-by: Andy Fleming <afleming@freescale.com>
23632 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
23633 Author: James Yang <James.Yang@freescale.com>
23634 Date: Wed Feb 7 15:28:04 2007 -0600
23636 Conditionalize 8641 Rev1.0 MCM workarounds
23638 Signed-off-by: James Yang <James.Yang@freescale.com>
23639 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23641 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
23642 Author: Timur Tabi <timur@freescale.com>
23643 Date: Mon Apr 30 13:59:50 2007 -0500
23645 Fix memory initialization on MPC8349E-mITX
23647 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
23648 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
23649 on some ITX boards, notably those with a revision 3.1 CPU.
23651 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
23652 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
23654 Signed-off-by: Timur Tabi <timur@freescale.com>
23655 Acked-by: Michael Benedict <MBenedict@twacs.com>
23656 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23658 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
23659 Author: Kim Phillips <kim.phillips@freescale.com>
23660 Date: Mon Apr 30 15:26:21 2007 -0500
23662 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
23664 and fix CPU: to align with Board: display text.
23666 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23668 commit c1ab82669d9525998c34e802a12cad662723f22a
23669 Author: James Yang <James.Yang@freescale.com>
23670 Date: Fri Mar 16 13:02:53 2007 -0500
23672 Rewrote picos_to_clk() to avoid rounding errors.
23673 Clarified that conversion is to DRAM clocks rather than platform clocks.
23674 Made function static to spd_sdram.c.
23676 Signed-off-by: James Yang <James.Yang@freescale.com>
23677 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23679 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
23680 Author: Stefan Roese <sr@denx.de>
23681 Date: Sun Apr 29 14:13:01 2007 +0200
23683 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
23685 Signed-off-by: Stefan Roese <sr@denx.de>
23687 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
23688 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
23689 Date: Sun Apr 29 14:01:54 2007 +0200
23691 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
23693 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
23694 message. Use PVR to distinguish between the two variants, and print proper CPU
23697 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
23698 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
23699 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
23701 commit 5c5d3242935cf3543af01142627494434834cf98
23702 Author: Kim Phillips <kim.phillips@freescale.com>
23703 Date: Wed Apr 25 12:34:38 2007 -0500
23705 mpc83xx: minor fixups for 8313rdb introduction
23707 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
23708 Author: Ladislav Michl <ladis@linux-mips.org>
23709 Date: Wed Apr 25 16:01:26 2007 +0200
23711 [PATCH] simplify silent console
23713 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
23714 Acked-by: Stefan Roese <sr@denx.de>
23716 commit 144876a380f5756f57412caf74c1d6dc201dd796
23717 Author: Michal Simek <monstr@monstr.eu>
23718 Date: Tue Apr 24 23:01:02 2007 +0200
23720 [PATCH] MTD partition support, JFFS2 support
23722 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
23723 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23724 Date: Tue Apr 24 14:03:45 2007 +0200
23726 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
23728 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23730 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
23731 Author: Andy Fleming <afleming@freescale.com>
23732 Date: Mon Apr 23 02:37:47 2007 -0500
23734 Reworked 85xx speed detection code
23736 Changed the code to read the registers and calculate the clock
23737 rates, rather than using a "switch" statement.
23739 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
23741 Signed-off-by: Andy Fleming <afleming@freescale.com>
23743 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
23744 Author: Andy Fleming <afleming@freescale.com>
23745 Date: Mon Apr 23 02:24:28 2007 -0500
23747 Enable 8544 support
23749 * Add support to the Makefile
23750 * Add 8544 configuration support to the tsec driver
23751 * Add 8544 SVR numbers to processor.h
23753 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23754 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23756 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
23757 Author: Andy Fleming <afleming@freescale.com>
23758 Date: Fri Feb 23 17:12:25 2007 -0600
23760 Support 1G size on 8548
23762 e500v2 and newer cores support 1G page sizes.
23764 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23765 Signed-off-by: Andy Fleming <afleming@freescale.com>
23767 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
23768 Author: Andy Fleming <afleming@freescale.com>
23769 Date: Fri Feb 23 17:11:16 2007 -0600
23771 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
23773 The other pagesz constants use one letter to specify order of
23774 magnitude. Also change the one reference to it in mpc8548cds/init.S
23776 Signed-off-by: Andy Fleming <afleming@freescale.com>
23778 commit 1f9a318cea14272edd10d63739e2d326c90f430e
23779 Author: Andy Fleming <afleming@freescale.com>
23780 Date: Fri Feb 23 16:28:46 2007 -0600
23782 Only set ddrioovcr for 8548 rev1.
23784 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23785 Signed-off-by: Andy Fleming <afleming@freescale.com>
23787 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
23788 Author: Andy Fleming <afleming@freescale.com>
23789 Date: Sat Feb 24 01:16:45 2007 -0600
23791 Tweak DDR ECC error counter
23793 Enable single-bit error counter when memory was cleared by ddr controller.
23795 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23796 Signed-off-by: Andy Fleming <afleming@freescale.com>
23798 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
23799 Author: Timur Tabi <timur@freescale.com>
23800 Date: Mon Feb 12 13:34:55 2007 -0600
23802 85xx: write MAC address to mac-address and local-mac-address
23804 Some device trees have a mac-address property, some have local-mac-address,
23805 and some have both. To support all of these device trees, ftp_cpu_setup()
23806 should write the MAC address to mac-address and local-mac-address, if they
23809 Signed-off-by: Timur Tabi <timur@freescale.com>
23811 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
23812 Author: Andy Fleming <afleming@freescale.com>
23813 Date: Mon Apr 23 01:44:44 2007 -0500
23815 Some 85xx cpu cleanups
23817 * Cleaned up the TSR[WIS] clearing
23818 * Cleaned up DMA initialization
23820 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23821 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23822 Acked-by: Andy Fleming <afleming@freescale.com>
23824 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
23825 Author: Andy Fleming <afleming@freescale.com>
23826 Date: Mon Apr 23 01:32:22 2007 -0500
23828 Add cpu support for the 8544
23830 Recognize new SVR values, and add a few register definitions
23832 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23833 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23834 Acked-by: Andy Fleming <afleming@freescale.com>
23836 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
23837 Author: Jon Loeliger <jdl@freescale.com>
23838 Date: Wed Apr 11 16:51:02 2007 -0500
23840 Add MPC8544DS basic port board files.
23842 Add board port under new board/freescale directory
23843 structure and reuse existing PIXIS FPGA support there.
23845 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23846 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23848 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
23849 Author: Jon Loeliger <jdl@freescale.com>
23850 Date: Wed Apr 11 16:50:57 2007 -0500
23852 Add MPC8544DS main configuration file.
23854 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23855 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23857 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
23858 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
23859 Date: Wed Dec 27 22:07:15 2006 +0300
23861 Fix PCI I/O space mapping on Freescale MPC85x0ADS
23863 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
23864 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
23865 describing the local address window used for the PCI I/O space accesses -- fix
23866 this and carry over the necessary changes into the MPC8560ADS code since the
23867 PCI I/O space mapping was also broken for this board (by the earlier commit
23868 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
23869 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
23871 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
23873 board/mpc8540ads/init.S | 4 ++--
23874 board/mpc8560ads/init.S | 4 ++--
23875 include/configs/MPC8540ADS.h | 5 ++---
23876 include/configs/MPC8541CDS.h | 2 +-
23877 include/configs/MPC8548CDS.h | 2 +-
23878 include/configs/MPC8560ADS.h | 8 ++++----
23879 6 files changed, 12 insertions(+), 13 deletions(-)
23881 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
23882 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
23883 Date: Tue Dec 5 16:42:30 2006 +0800
23885 u-boot: Fix e500 v2 core reset bug
23887 The following patch fixes the e500 v2 core reset bug.
23888 For e500 v2 core, a new reset control register is added to reset the
23891 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
23893 commit 63247a5acd58032e6cf33f525bc3923b467bac88
23894 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
23895 Date: Wed Dec 20 11:01:00 2006 +0800
23897 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
23899 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
23900 entry number to control the loop. This can reduce the potential risk
23901 for the 85xx processor increasing its TLB adn LAW entry number.
23903 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
23904 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
23906 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
23907 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
23908 Date: Mon Dec 18 17:01:04 2006 +0800
23910 u-boot: Fix the 85xxcds tsec bug
23912 Fix the 85xxcds tsec bug.
23913 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
23915 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
23917 commit 7337b237ffc4aaf1b9467024fe472a880d852598
23918 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
23919 Date: Fri Dec 15 14:43:31 2006 +0800
23921 u-boot: Fix CPU2 errata on MPC8548CDS board
23923 This patch apply workaround of CPU2 errata on MPC8548CDS board.
23925 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
23927 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
23928 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
23929 Date: Mon Dec 18 16:25:15 2006 +0800
23931 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
23933 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
23935 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
23937 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
23938 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
23939 Date: Thu Dec 14 14:14:55 2006 +0800
23941 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
23943 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
23945 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
23947 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
23948 Author: Scott Wood <scottwood@freescale.com>
23949 Date: Mon Apr 16 14:54:15 2007 -0500
23951 mpc83xx: Add MPC8313ERDB support.
23953 Signed-off-by: Scott Wood <scottwood@freescale.com>
23955 commit 49ea3b6eafe606285ae4d5c378026153dde53200
23956 Author: Scott Wood <scottwood@freescale.com>
23957 Date: Mon Apr 16 14:34:21 2007 -0500
23959 mpc83xx: Add generic PCI setup code.
23961 Board code can now request the generic setup code rather than having to
23962 copy-and-paste it for themselves. Boards should be converted to use this
23963 once they're tested with it.
23965 Signed-off-by: Scott Wood <scottwood@freescale.com>
23967 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
23968 Author: Scott Wood <scottwood@freescale.com>
23969 Date: Mon Apr 16 14:34:19 2007 -0500
23971 mpc83xx: Add 831x support to speed.c.
23973 Signed-off-by: Scott Wood <scottwood@freescale.com>
23975 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
23976 Author: Scott Wood <scottwood@freescale.com>
23977 Date: Mon Apr 16 14:34:18 2007 -0500
23979 mpc83xx: Add 831x support to global_data.h
23981 Signed-off-by: Scott Wood <scottwood@freescale.com>
23983 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
23984 Author: Scott Wood <scottwood@freescale.com>
23985 Date: Mon Apr 16 14:34:16 2007 -0500
23987 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
23989 Rather than misleadingly define PVR_83xx as the specific type of 83xx
23990 being built for, the PVR of each core revision is defined. checkcpu() now
23991 prints the core that it detects, rather than aborting if it doesn't find
23992 what it thinks it wants.
23994 Signed-off-by: Scott Wood <scottwood@freescale.com>
23996 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
23997 Author: Scott Wood <scottwood@freescale.com>
23998 Date: Mon Apr 16 14:34:15 2007 -0500
24000 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
24002 Signed-off-by: Scott Wood <scottwood@freescale.com>
24004 commit d87c57b201b4572d16f1b642998faa00c9912b16
24005 Author: Scott Wood <scottwood@freescale.com>
24006 Date: Mon Apr 16 14:31:55 2007 -0500
24008 mpc83xx: Add register definitions for MPC831x.
24010 Signed-off-by: Scott Wood <scottwood@freescale.com>
24012 commit 7fc4c71a143be8666d70803fb25ae60379c95622
24013 Author: Stefan Roese <sr@denx.de>
24014 Date: Mon Apr 23 15:39:59 2007 +0200
24018 Signed-off-by: Stefan Roese <sr@denx.de>
24020 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
24021 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
24022 Date: Mon Apr 23 15:30:39 2007 +0200
24024 [PATCH] Avoid assigning PCI resources from zero address
24026 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
24027 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
24028 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
24029 sentence about "0" being considered an invalid address) -- so, use a reasonable
24030 starting value of 0x1000 (that's what the most Linux archs are using).
24032 Alternatively, one might have fixed the calls to pci_set_region() individually
24033 (some code even seems to have taken care of this issue) but that would have
24034 been a lot more work. :-)
24036 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
24037 Acked-by: Stefan Roese <sr@denx.de>
24039 commit afb903a2eb9436baa9270ccc0c27082d86497d89
24040 Author: Jeffrey Mann <mannj@embeddedplanet.com>
24041 Date: Mon Apr 23 14:00:11 2007 +0200
24043 [patch] setenv(...) can delete environmentalvariables
24045 update setenv() function so that entering a NULL value for the
24046 variable's value will delete the environmental variable
24048 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
24049 Acked-by: Stefan Roese <sr@denx.de>
24051 commit 36f104e5caa747d568eff26b369565af57c2ffa6
24052 Author: Mike Frysinger <vapier@gentoo.org>
24053 Date: Mon Apr 23 13:54:24 2007 +0200
24055 [patch] use unsigned char in smc91111 driver for mac
24057 the v_mac variable in the smc91111 driver is declared as a signed char ...
24058 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
24059 because when it gets printed out, you get a display like:
24060 0xFFFFFFE0 and that's no good
24062 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
24064 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
24065 Author: Rodolfo Giometti <giometti@enneenne.com>
24066 Date: Mon Apr 23 13:10:52 2007 +0200
24068 USB: (Another) delay for crappy USB keys.
24070 Some USB keys are slow in giving back an answer when the Root HUB
24071 enables power lines.
24073 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
24075 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
24076 Author: Stefan Roese <sr@denx.de>
24077 Date: Mon Apr 23 12:00:22 2007 +0200
24079 Remove BOARDLIBS usage completely
24081 Signed-off-by: Stefan Roese <sr@denx.de>
24083 commit 32556443840f127170e4baa8bdd5b567039f6c36
24084 Author: Michal Simek <monstr@monstr.eu>
24085 Date: Sat Apr 21 21:07:22 2007 +0200
24087 [PATCH] SystemACE support for Microblaze
24089 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
24090 Author: Michal Simek <monstr@monstr.eu>
24091 Date: Sat Apr 21 21:02:40 2007 +0200
24093 16bit read/write little endian
24095 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
24096 Author: Michal Simek <monstr@monstr.eu>
24097 Date: Sat Apr 21 20:53:31 2007 +0200
24099 Change ML401 parameters - Xilinx BSP
24101 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
24102 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
24103 Date: Wed Feb 28 05:37:29 2007 -0600
24105 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
24107 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
24109 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
24110 Author: Zhang Wei <wei.zhang@freescale.com>
24111 Date: Fri Jan 19 10:42:37 2007 +0800
24113 Enable LAWs for MPC8641 PCI-Ex2.
24115 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
24116 Signed-off-by: Jon Loeliger <jdl@freescale.com>
24118 commit bd7851ce1e1f140665b520026abf1042968b1102
24119 Author: Jon Loeliger <jdl@freescale.com>
24120 Date: Fri Apr 20 14:12:26 2007 -0500
24122 mpc86xx; Write MAC address to mac-address and local-mac-address
24124 Some device trees have a mac-address property, some have local-mac-address,
24125 and some have both. To support all of these device trees, ftp_cpu_setup()
24126 should write the MAC address to mac-address and local-mac-address, if they
24129 Signed-off-by: Timur Tabi <timur@freescale.com>
24130 Signed-off-by: Jon Loeliger <jdl@freescale.com>
24132 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
24133 Author: Jon Loeliger <jdl@freescale.com>
24134 Date: Fri Apr 20 14:11:38 2007 -0500
24136 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
24138 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24139 Signed-off-by: Jon Loeliger <jdl@freescale.com>
24141 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
24142 Author: Wolfgang Denk <wd@denx.de>
24143 Date: Fri Apr 20 17:43:28 2007 +0200
24145 Cleanup compiler warnings, update CHANGELOG
24147 Signed-off-by: Wolfgang Denk <wd@denx.de>
24149 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
24150 Author: Detlev Zundel <dzu@denx.de>
24151 Date: Fri Apr 20 12:01:47 2007 +0200
24153 Fix breakage of NC650 board with respect to nand support.
24155 Signed-off-by: Detlev Zundel <dzu@denx.de>
24157 commit 39f23cd90947639ac278a18ff277ec786b5ac167
24158 Author: Domen Puncer <domen.puncer@telargo.com>
24159 Date: Fri Apr 20 11:13:16 2007 +0200
24161 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
24163 G2 core reference manual says decrementer and time base
24164 are decreasing/increasing once every 4 bus clock cycles.
24165 Lets fix it, so time in Linux won't run twice as fast
24167 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
24168 Acked-by: Grant Likely <grant.likely@secretlab.ca>
24170 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
24171 Author: Gerald Van Baren <vanbaren@cideas.com>
24172 Date: Thu Apr 19 23:14:39 2007 -0400
24174 Fix serious pointer bug with bootm and reserve map.
24176 What was suppose to be a stack variable was declared as a pointer,
24177 overwriting random memory.
24178 Also moved the libfdt.a requirement into the main Makefile. That is
24181 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
24182 Author: Stefan Roese <sr@denx.de>
24183 Date: Thu Apr 19 09:53:52 2007 +0200
24185 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
24187 Previous versions used full wait states for the chip select #1 which
24188 is connected to the Xilinix SystemACE controller on the AMCC Katmai
24189 evaluation board. This leads to really slow access and therefore low
24190 performance. This patch now sets up the chip select a lot faster
24191 resulting in much better read/write performance of the Linux driver.
24193 Signed-off-by: Stefan Roese <sr@denx.de>
24195 commit 37837828d89084879bee2f2b8c7c68d4695940df
24196 Author: Wolfgang Denk <wd@denx.de>
24197 Date: Wed Apr 18 17:49:29 2007 +0200
24199 Clenaup, update CHANGELOG
24201 Signed-off-by: Wolfgang Denk <wd@denx.de>
24203 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
24204 Author: Wolfgang Denk <wd@denx.de>
24205 Date: Wed Apr 18 17:20:58 2007 +0200
24209 Signed-off-by: Wolfgang Denk <wd@denx.de>
24211 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
24212 Author: Wolfgang Denk <wd@denx.de>
24213 Date: Wed Apr 18 17:07:26 2007 +0200
24215 Cleanup, update CHANGELOG
24217 Sigend-off-by: Wolfgang Denk <wd@denx.de>
24219 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
24220 Author: Wolfgang Denk <wd@denx.de>
24221 Date: Wed Apr 18 16:17:46 2007 +0200
24225 commit ad4eb555671d97f96dc56eab55103b1f86874b01
24226 Author: Wolfgang Denk <wd@denx.de>
24227 Date: Wed Apr 18 14:30:39 2007 +0200
24229 MCC200 board: remove warning which is obsolete after PSoC firmware changes
24231 Signed-off-by: Wolfgang Denk <wd@denx.de>
24233 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
24234 Author: Domen Puncer <domen.puncer@telargo.com>
24235 Date: Wed Apr 18 12:11:05 2007 +0200
24237 [PATCH] icecube/lite5200b: document wakeup from low-power support
24239 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
24241 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
24242 Author: Stefan Roese <sr@denx.de>
24243 Date: Wed Apr 18 12:07:47 2007 +0200
24245 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
24247 Signed-off-by: Stefan Roese <sr@denx.de>
24249 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
24250 Author: Stefan Roese <sr@denx.de>
24251 Date: Wed Apr 18 12:05:59 2007 +0200
24253 ppc4xx: Add output for bootrom location to 405EZ ports
24255 Now 405EZ ports also show upon bootup from which boot device
24256 they are configured to boot:
24258 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
24260 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
24261 Bootstrap Option E - Boot ROM Location EBC (32 bits)
24262 16 kB I-Cache 16 kB D-Cache
24263 Board: Acadia - AMCC PPC405EZ Evaluation Board
24265 Signed-off-by: Stefan Roese <sr@denx.de>
24267 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
24268 Author: Peter Pearse <peter.pearse@arm.com>
24269 Date: Tue Apr 17 13:30:33 2007 +0100
24271 Move ppearse to ARM board list
24272 Add Konstantin Kletschke for scb9328.
24273 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
24275 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
24276 Author: Domen Puncer <domen.puncer@telargo.com>
24277 Date: Mon Apr 16 14:00:13 2007 +0200
24279 [PATCH] icecube/lite5200b: wakeup from low-power support
24281 U-Boot part of Lite5200b low power mode support.
24282 Puts SDRAM out of self-refresh and transfers control to
24283 address saved at physical 0x0.
24285 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
24286 Acked-by: Grant Likely <grant.likely@secretlab.ca>
24288 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
24289 Author: Gerald Van Baren <vanbaren@cideas.com>
24290 Date: Sun Apr 15 13:54:26 2007 -0400
24292 Fix the ft_cpu_setup() property settings.
24294 Use "setter" functions instead of flags, cleaner and more flexible.
24295 It also fixes the problem noted by Timur Tabi that the ethernet MAC
24296 addresses were all being set incorrectly to the same MAC address.
24298 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
24299 Author: Gerald Van Baren <vanbaren@cideas.com>
24300 Date: Sat Apr 14 22:51:24 2007 -0400
24302 Improve the bootm command for CONFIG_OF_LIBFDT
24304 In bootm, create the "/chosen" node only if it doesn't already exist
24305 (better matches the previous behavior).
24306 Update for proper reserved memory map handling for initrd.
24308 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
24309 Author: Gerald Van Baren <vanbaren@cideas.com>
24310 Date: Sat Apr 14 22:46:41 2007 -0400
24312 Add some utilities to manipulate the reserved memory map.
24314 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
24315 Author: Wolfgang Denk <wd@denx.de>
24316 Date: Sat Apr 14 21:16:54 2007 +0200
24320 commit 8e6875183cdca91c134408d119d4abcd48ef6856
24321 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24322 Date: Sun Dec 17 18:56:46 2006 +0100
24324 AVR32: Enable MMC support
24326 Set up the portmux for the MMC interface and enable the MMC driver
24327 along with support for DOS partitions, ext2 and FAT filesystems.
24329 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24331 commit fc26c97bb6df41b4a95662c34054fe912387bf38
24332 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24333 Date: Fri Jan 20 10:03:53 2006 +0100
24337 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
24339 The AT91 ARM-based CPUs use basically the same hardware, so it should
24340 be possible to share this driver, but no effort has been made so far.
24342 Hardware documentation can be found in the AT32AP7000 data sheet,
24343 which can be downloaded from
24345 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
24347 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24349 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
24350 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24351 Date: Sun Dec 17 18:55:37 2006 +0100
24353 AVR32: Add clk and gpio infrastructure for mmci
24355 Implement functions for configuring the mmci pins, as well as
24356 functions for getting the clock rate of the mmci controller.
24358 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24360 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
24361 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24362 Date: Sun Dec 17 18:53:56 2006 +0100
24364 Enable partition support with MMC
24366 Include implementations of init_part() and get_partition_info() when
24369 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24371 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
24372 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24373 Date: Sun Dec 17 17:14:30 2006 +0100
24375 AVR32: Enable networking
24377 Implement MACB initialization for AVR32 and ATSTK1000, and turn
24378 everything on, including the MACB driver.
24380 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24382 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
24383 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24384 Date: Fri Jan 20 10:03:34 2006 +0100
24386 Atmel MACB ethernet driver
24388 Driver for the Atmel MACB on-chip ethernet controller.
24390 This driver has been tested on the ATSTK1000 board with a AT32AP7000
24391 CPU. It should probably work on AT91SAM926x as well with some minor
24394 Hardware documentation can be found in the AT32AP7000 data sheet,
24395 which can be downloaded from
24397 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
24399 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24401 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
24402 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24403 Date: Sun Dec 17 16:56:14 2006 +0100
24405 AVR32: Add clk and gpio infrastructure for macb0 and macb1
24407 Implement functions for configuring the macb0 and macb1 pins, as
24408 well as functions for getting the clock rate of the various
24409 busses the macb ethernet controllers are connected to.
24411 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24413 commit d5acb95b16a0a74c643524342c3437e765426d05
24414 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24415 Date: Sun Dec 17 15:39:15 2006 +0100
24417 AVR32: Implement simple DMA memory allocator
24419 Implement dma_alloc_coherent() which returns cache-aligned
24420 uncacheable memory.
24422 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24424 commit 91975b0fea773c9e681fea8cf3349669f27685ee
24425 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24426 Date: Sun Dec 17 15:46:02 2006 +0100
24428 Import <linux/mii.h> from the Linux kernel
24430 Instead of creating yet another set of MII register definitions
24431 in the macb driver, here's a complete set of definitions for everyone
24434 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24436 commit 1b804b229556a4d862da93c0ec94e79419364b2c
24437 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24438 Date: Wed Mar 21 19:47:36 2007 +0100
24440 AVR32: Include more commands for ATSTK1000
24442 Include the imi, imls and jffs commands sets by default on ATSTK1000.
24443 Also define CONFIG_BOOTARGS to something more useful, define
24444 CONFIG_BOOTCOMMAND and enable autoboot by default.
24446 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24448 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
24449 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24450 Date: Wed Mar 21 19:44:48 2007 +0100
24452 AVR32: Provide a definition of struct stat
24454 Copy the definition of struct stat from the Linux kernel.
24456 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24458 commit 12f099c08167a7a51aeee623bc16dafd0841271c
24459 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24460 Date: Sun Dec 17 14:46:06 2006 +0100
24462 AVR32: Use initdram() instead of board_init_memories()
24464 Conform to the "standard" interface and use initdram() instead of
24465 board_init_memories() on AVR32. This enables us to get rid of the
24466 sdram_size member of the global_data struct as well.
24468 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24470 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
24471 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24472 Date: Mon Nov 20 15:53:10 2006 +0100
24474 AVR32: Relocate u-boot to SDRAM
24476 Relocate the u-boot image into SDRAM like everyone else does. This
24477 means that we can handle much larger .data and .bss than we used to.
24479 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24481 commit df548d3c3e2bbc40258713167859ffc2ce99a900
24482 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24483 Date: Sun Nov 19 18:06:53 2006 +0100
24485 AVR32: Resource management rewrite
24487 Rewrite the resource management code (i.e. I/O memory, clock gating,
24488 gpio) so it doesn't depend on any global state. This is necessary
24489 because this code is heavily used before relocation to RAM, so we
24490 can't write to any global variables.
24492 As an added bonus, this makes u-boot's memory footprint a bit smaller,
24493 although some functionality has been left out; all clocks are enabled
24494 all the time, and there's no checking for gpio line conflicts.
24496 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24498 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
24499 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24500 Date: Sat Nov 18 18:01:13 2006 +0100
24502 AVR32: Clean up memory-map.h for at32ap7000
24504 Convert spaces to tabs (must have missed this one last time around),
24505 sort the entries by address and group them together by bus
24508 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24510 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
24511 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24512 Date: Sat Nov 18 17:32:31 2006 +0100
24514 AVR32: Build position-independent u-boot
24516 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
24517 position independent. This will make relocation a lot easier.
24519 -mno-init-got means that gcc shouldn't emit code to load the GOT
24520 address into r6 in every function prologue. We do it once and for
24521 all in the early startup assembly code, so enabling this option
24522 makes u-boot a bit faster and smaller.
24524 The assembly parts have always been position-independent, so no code
24525 changes should be necessary.
24527 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24529 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
24530 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24531 Date: Sat Nov 18 17:24:31 2006 +0100
24533 AVR32: Use avr32-linux- cross-compilation prefix by default
24535 It doesn't really matter which toolchain you use to compile u-boot,
24536 but the avr32-linux one is probably what most people have installed.
24538 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24540 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
24541 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
24542 Date: Sat Nov 18 17:15:30 2006 +0100
24544 AVR32: Split start_u_boot into board_init_f and board_init_r
24546 Split the avr32 initialization code into a function to run before
24547 relocation, board_init_f and a function to run after relocation,
24548 board_init_r. For now, board_init_f simply calls board_init_r
24551 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24553 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
24554 Author: Heiko Schocher <hs@pollux.denx.de>
24555 Date: Sat Apr 14 05:26:48 2007 +0200
24557 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
24558 clear the Display after reset.
24560 Signed-off-by: Heiko Schocher <hs@denx.de>
24562 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
24563 Author: Denis Peter <d.peter@mpl.ch>
24564 Date: Fri Apr 13 09:13:33 2007 +0200
24566 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
24568 Fix bug introduced by "Fix get_partition_info() parameter error in all
24569 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
24570 to use diskboot or scsiboot form another device than 0.
24572 Signed-off-by: Denis Peter <d.peter@mpl.ch>
24574 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
24575 Author: Greg Lopp <lopp@pobox.com>
24576 Date: Fri Apr 13 08:02:24 2007 +0200
24578 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
24580 Signed-of-by: Greg Lopp <lopp@pobox.com>
24581 Acked-by: Grant Likely <grant.likely@secretlab.ca>
24583 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
24584 Author: Xie Xiaobo <r63061@freescale.com>
24585 Date: Fri Mar 9 19:08:25 2007 +0800
24587 Fix two bugs for MPC83xx DDR2 controller SPD Init
24589 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
24590 the first bug is that the picos_to_clk routine introduces a huge
24591 rounding error in 83xx.
24592 the second bug is that the mode register write recovery field is
24593 tWR-1, not tWR >> 1.
24595 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
24596 Author: Jeffrey Mann <mannj@embeddedplanet.com>
24597 Date: Thu Apr 12 14:15:59 2007 +0200
24599 ppc4xx: Fix i2c divisor calcularion for PPC4xx
24601 This patch fixes changes the i2c_init(...) function to use the function
24602 get_OPB_freq() rather than calculating the OPB speed by
24603 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
24604 specific per processor. The prior method was not and so was calculating
24605 the wrong speed for some PPC4xx processors.
24607 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
24608 Signed-off-by: Stefan Roese <sr@denx.de>
24610 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
24611 Author: Wolfgang Denk <wd@denx.de>
24612 Date: Wed Apr 11 17:25:01 2007 +0200
24616 Signed-off-by: Wolfgang Denk <wd@denx.de>
24618 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
24619 Author: Wolfgang Denk <wd@denx.de>
24620 Date: Wed Apr 11 17:22:55 2007 +0200
24622 Update for SC3 board
24624 * Make IDE timeout configurable through ide_reset_timeout variable.
24625 * Use Newline as "password" string
24626 * Use just a single partition in NAND flash
24628 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
24629 Author: Haiying Wang <haiying.wang@freescale.com>
24630 Date: Mon Jan 22 12:37:30 2007 -0600
24632 Add PIXIS FPGA support for MPC8641HPCN board.
24634 Move the 8641HPCN's PIXIS code to the new directory
24635 board/freescale/common/ as it will be shared by
24636 future boards not in the same processor family.
24638 Write a "pixis_reset" command that utilizes the FPGA
24639 reset sequencer to support alternate soft-reset options
24640 such as using the "alternate" flash bank, enabling
24641 the watch dog, or choosing different CPU frequencies.
24643 Add documentation for the pixis_reset to README.mpc8641hpcn.
24645 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
24646 Signed-off-by: Jon Loeliger <jdl@freescale.com>
24648 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
24649 Author: Gerald Van Baren <vanbaren@cideas.com>
24650 Date: Fri Apr 6 14:19:43 2007 -0400
24652 Moved fdt command support code to fdt_support.c
24654 ...in preparation for improving the bootm command's handling of fdt blobs.
24655 Also cleaned up some coding sloppiness.
24657 commit 6679f9299534e488a171a9bb8f9bb891de247aab
24658 Author: Gerald Van Baren <vanbaren@cideas.com>
24659 Date: Fri Apr 6 14:17:14 2007 -0400
24661 libfdt: Make fdt_check_header() public
24663 Changed _fdt_check_header() to fdt_check_header() and made it part of
24664 the interface - it is a useful routine.
24666 Also did some asthetics cleanup to the include files (headers).
24668 commit c0707ce65677650b5ceab0500ee50ae5168afef2
24669 Author: Aubrey Li <aubrey.adi@gmail.com>
24670 Date: Thu Apr 5 18:34:06 2007 +0800
24672 [Blackfin][PATCH] Kill off a bunch of common local prototypes
24674 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
24675 Author: Aubrey Li <aubrey.adi@gmail.com>
24676 Date: Thu Apr 5 18:33:04 2007 +0800
24678 [Blackfin][PATCH] Fix dynamic CPLB generation issue
24680 commit 0445e3a264251d75b1be45ef713c70726a2952f0
24681 Author: Aubrey Li <aubrey.adi@gmail.com>
24682 Date: Thu Apr 5 18:31:47 2007 +0800
24684 [Blackfin][PATCH] minior cleanup
24686 commit 155fd766573981090e638b493d5857562151862e
24687 Author: Aubrey Li <aubrey.adi@gmail.com>
24688 Date: Thu Apr 5 18:31:18 2007 +0800
24690 [Blackfin][PATCH] Fix copyright and update license
24692 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
24693 Author: Aubrey Li <aubrey.adi@gmail.com>
24694 Date: Thu Apr 5 18:30:25 2007 +0800
24696 [Blackfin][PATCH] Add BF537 EMAC driver initialization
24698 commit 889256e8604e0c68db1d866d720894dffede9df6
24699 Author: Aubrey Li <aubrey.adi@gmail.com>
24700 Date: Thu Apr 5 18:29:55 2007 +0800
24702 [Blackfin][PATCH] call real the system synchronize instruction
24704 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
24705 Author: Aubrey Li <aubrey.adi@gmail.com>
24706 Date: Thu Apr 5 18:29:17 2007 +0800
24708 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
24710 commit dfeeab2cd680df047e68e723b246adf6f33bb556
24711 Author: Aubrey Li <aubrey.adi@gmail.com>
24712 Date: Thu Apr 5 18:28:34 2007 +0800
24714 [Blackfin][PATCH]: fix flash unaligned copy issue
24716 commit 443feb740584e406efa203af909fe2926608e8d5
24717 Author: Igor Marnat <marny@rambler.ru>
24718 Date: Wed Mar 21 09:55:01 2007 +0300
24720 Update usage of 'nc' in README.NetConsole
24722 Added information about usage of NetConsole on systems where the -l and -p
24723 switches are mutually exclusive.
24725 Signed-off-by: Igor Marnat <marny@rambler.ru>
24726 Signed-off-by: Ben Warren <bwarren@qstreams.com>
24728 commit 31c98a88228021b314c89ebb8104fb6473da4471
24729 Author: Wolfgang Denk <wd@denx.de>
24730 Date: Wed Apr 4 02:09:30 2007 +0200
24732 Minor coding style cleanup.
24734 commit 94abd7c0583ebe01e799b25f451201deeaab550d
24735 Author: Wolfgang Denk <wd@denx.de>
24736 Date: Wed Apr 4 01:49:15 2007 +0200
24740 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
24741 Author: Rodolfo Giometti <giometti@enneenne.com>
24742 Date: Tue Apr 3 14:27:18 2007 +0200
24744 Support for the Philips ISP116x HCD (Host Controller Driver)
24746 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
24748 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
24749 Author: Markus Klotzbuecher <mk@denx.de>
24750 Date: Tue Apr 3 14:27:08 2007 +0200
24752 USB: cleanup monahans usb support. Remove dead code.
24754 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
24756 commit a65c5768e5537530bd1780af3d3fddc3113a163c
24757 Author: Stefan Roese <sr@denx.de>
24758 Date: Mon Apr 2 10:09:30 2007 +0200
24760 ppc4xx: Change SysACE address on Katmai
24762 With this new base address of the Xilinx SystemACE controller
24763 the Linux driver will be easier to adapt, since it can now be
24764 mapped via the "normal" ioremap() call.
24766 Signed-off-by: Stefan Roese <sr@denx.de>
24768 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
24769 Author: Gerald Van Baren <vanbaren@cideas.com>
24770 Date: Sat Mar 31 14:30:53 2007 -0400
24772 Fix some minor whitespace violations.
24774 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
24775 Author: Gerald Van Baren <vanbaren@cideas.com>
24776 Date: Sat Mar 31 12:23:51 2007 -0400
24778 Add a flattened device tree (fdt) command (2 of 2)
24780 Modifications to the existing code to support the new fdt command.
24782 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
24783 Author: Gerald Van Baren <vanbaren@cideas.com>
24784 Date: Sat Mar 31 12:22:10 2007 -0400
24786 Add a flattened device tree (fdt) command (1 of 2)
24788 The fdt command uses David Gibson's libfdt library to manipulate as well
24789 as print the flattened device tree. This patch is the new command,
24790 the second part is the modifications to the existing code.
24792 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
24793 Author: Gerald Van Baren <vanbaren@cideas.com>
24794 Date: Sat Mar 31 12:13:43 2007 -0400
24796 libfdt: Enhanced and published fdt_next_tag()
24798 Enhanced the formerly private function _fdt_next_tag() to allow stepping
24799 through the tree, used to produce a human-readable dump, and made
24800 it part of the published interface.
24801 Also added some comments.
24803 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
24804 Author: Gerald Van Baren <vanbaren@cideas.com>
24805 Date: Sat Mar 31 12:05:39 2007 -0400
24807 libfdt: Customizations for use by u-boot.
24809 Changes to David Gibson's original source to fit into u-boot's
24810 environment. No functionality changes.
24812 commit 35748177c64a4a83a00057e93bb33e40278a2a96
24813 Author: Gerald Van Baren <vanbaren@cideas.com>
24814 Date: Sat Mar 31 12:00:56 2007 -0400
24816 libfdt: Import libfdt source (2 of 2)
24818 This adds the applicable libfdt source files (unmodified) and a README
24819 to explain where the source came from.
24821 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
24822 Author: Gerald Van Baren <vanbaren@cideas.com>
24823 Date: Sat Mar 31 11:59:59 2007 -0400
24825 libfdt: Import libfdt source (1 of 2)
24827 This adds the applicable libfdt source files (unmodified) and a README
24828 to explain where the source came from.
24830 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
24831 Author: Stefan Roese <sr@denx.de>
24832 Date: Sat Mar 31 13:16:23 2007 +0200
24834 ppc4xx: Update Katmai bootstrap command
24836 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
24839 Signed-off-by: Stefan Roese <sr@denx.de>
24841 commit cabee756a6532986729477c3cc1ea16ef8517ad2
24842 Author: Stefan Roese <sr@denx.de>
24843 Date: Sat Mar 31 13:15:06 2007 +0200
24845 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
24847 Additional RAM information is now printed upon powerup, like
24848 DDR2 frequency and CAS latency.
24850 Signed-off-by: Stefan Roese <sr@denx.de>
24852 commit 60723803431ac75cad085690789e433d5ab9174e
24853 Author: Stefan Roese <sr@denx.de>
24854 Date: Sat Mar 31 08:48:36 2007 +0200
24856 ppc4xx: Change Yucca config file to support ECC
24858 With the updated 44x DDR2 driver the Yucca board now supports
24859 ECC generation and checking.
24861 Signed-off-by: Stefan Roese <sr@denx.de>
24863 commit 490e5730c674b20d708b783a2c5ffd7208f83873
24864 Author: Stefan Roese <sr@denx.de>
24865 Date: Sat Mar 31 08:47:34 2007 +0200
24867 ppc4xx: Fix "bootstrap" command for Katmai board
24869 The board specific "bootstrap" command is now fixed and can
24870 be used for the AMCC Katmai board to configure different
24871 CPU/PLB/OPB frequencies.
24873 Signed-off-by: Stefan Roese <sr@denx.de>
24875 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
24876 Author: Stefan Roese <sr@denx.de>
24877 Date: Sat Mar 31 08:46:08 2007 +0200
24879 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
24881 Fix a bug in the auto calibration routine. This driver now runs
24882 more reliable with the tested modules. It's also tested with
24883 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
24885 Signed-off-by: Stefan Roese <sr@denx.de>
24887 commit 342cd097be1e7affe82f42ab3da220959a699e64
24888 Author: Michal Simek <monstr@monstr.eu>
24889 Date: Fri Mar 30 22:52:09 2007 +0200
24891 [PATCH] Clean include dependence
24893 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
24894 Author: Michal Simek <monstr@monstr.eu>
24895 Date: Fri Mar 30 22:42:45 2007 +0200
24897 [CLEAN] Remove inefficient Suzaku code
24899 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
24900 Author: Stefan Roese <sr@denx.de>
24901 Date: Wed Mar 28 15:03:16 2007 +0200
24903 Merge some AMCC make targets to keep the top-level Makefile smaller
24905 Signed-off-by: Stefan Roese <sr@denx.de>
24907 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
24908 Author: Stefan Roese <sr@denx.de>
24909 Date: Wed Mar 28 14:52:12 2007 +0200
24911 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
24913 The "old" i2c commands (iprobe, imd...) are now compiled in again,
24914 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
24917 Signed-off-by: Stefan Roese <sr@denx.de>
24919 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
24920 Author: Michal Simek <monstr@monstr.eu>
24921 Date: Tue Mar 27 00:32:16 2007 +0200
24923 PATCH: Resolve GPL license problem
24925 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
24926 Author: Rodolfo Giometti <giometti@enneenne.com>
24927 Date: Mon Mar 26 12:03:36 2007 +0200
24929 PXA: pxa27x USB OHCI support
24931 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
24933 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
24934 Author: Markus Klotzbuecher <mk@denx.de>
24935 Date: Mon Mar 26 11:21:05 2007 +0200
24937 USB: remove the S3C24X0_merge #define, which was introduced while
24938 merging OHCI drivers.
24940 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
24942 commit 1798049522f594013aea29457d46794298c6ae15
24943 Author: Michal Simek <root@monstr.eu>
24944 Date: Mon Mar 26 01:39:07 2007 +0200
24946 Support for XUPV2P board
24948 BSP autoconfig support
24950 commit 0d974d5297349504a2ddfa09314be573b5df320a
24951 Author: Stefan Roese <sr@denx.de>
24952 Date: Sat Mar 24 15:57:09 2007 +0100
24954 [PATCH] Add 4xx GPIO functions
24956 This patch adds some 4xx GPIO functions. It also moves some of the
24957 common code and defines into a common 4xx GPIO header file.
24959 Signed-off-by: Stefan Roese <sr@denx.de>
24961 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
24962 Author: Stefan Roese <sr@denx.de>
24963 Date: Sat Mar 24 15:55:58 2007 +0100
24965 [PATCH] Small Sequoia cleanup
24967 Signed-off-by: Stefan Roese <sr@denx.de>
24969 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
24970 Author: Stefan Roese <sr@denx.de>
24971 Date: Sat Mar 24 15:45:34 2007 +0100
24973 [PATCH] Clean up 40EZ/Acadia support
24975 This patch cleans up all the open issue of the preliminary
24978 Signed-off-by: Stefan Roese <sr@denx.de>
24980 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
24981 Author: Jon Loeliger <jdl@freescale.com>
24982 Date: Tue Dec 12 11:02:20 2006 -0600
24984 Fix 8641HPCN problem with ld version 2.16
24986 (Dot outside sections problem).
24988 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
24990 Signed-off-by: Jon Loeliger <jdl@freescale.com>
24992 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
24993 Author: Haiying Wang <haiying.wang@freescale.com>
24994 Date: Thu Dec 7 10:35:55 2006 -0600
24996 Set Rev 2.x 86xx PIC in mixed mode.
24998 Prevent false interrupt from hanging Linux as MSR[EE] is set
24999 to enable interrupts by changing the PIC out of the default
25000 pass through mode into mixed mode.
25002 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
25003 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25005 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
25006 Author: Jason Jin <jason.jin@freescale.com>
25007 Date: Thu Dec 7 10:32:35 2006 -0600
25009 Add flash cmd function to 8641HPCN ramboot
25011 Also fixes some commmand for 8641 HPCN ramboot case.
25013 Signed-off-by: Jason Jin <jason.jin@freescale.com>
25014 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25016 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
25017 Author: Ed Swarthout <ed.swarthout@freescale.com>
25018 Date: Thu Dec 7 10:34:14 2006 -0600
25020 Add support for 8641 Rev 2 silicon.
25022 Without this patch, I am unable to get to the prompt on rev 2 silicon.
25023 Only set ddrioovcr for rev1.
25025 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
25026 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25028 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
25029 Author: Wolfgang Denk <wd@denx.de>
25030 Date: Thu Mar 22 00:13:12 2007 +0100
25032 Code cleanup / re-insert previous Copyright entries.
25034 Signed-off-by: Wolfgang Denk <wd@denx.de>
25036 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
25037 Author: Wolfgang Denk <wd@denx.de>
25038 Date: Wed Mar 21 23:26:15 2007 +0100
25040 Code cleanup. Update CHANGELOG
25042 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
25043 Author: Stefan Roese <sr@denx.de>
25044 Date: Wed Mar 21 14:54:29 2007 +0100
25046 ppc4xx: Fix file mode of include/configs/acadia.h
25048 Signed-off-by: Stefan Roese <sr@denx.de>
25050 commit d5f4614c9350d9333e575100fb250aab774d0258
25051 Author: Markus Klotzbuecher <mk@denx.de>
25052 Date: Wed Mar 21 14:41:46 2007 +0100
25054 SPC1920: fix small clock routing bug
25056 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25058 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
25059 Author: Stefan Roese <sr@denx.de>
25060 Date: Wed Mar 21 13:39:57 2007 +0100
25062 [PATCH] Add AMCC Acadia (405EZ) eval board support
25064 This patch adds support for the new AMCC Acadia eval board.
25066 Please note that this Acadia/405EZ support is still in a beta stage.
25067 Still lot's of cleanup needed but we need a preliminary release now.
25069 Signed-off-by: Stefan Roese <sr@denx.de>
25071 commit e01bd218b00af73499331a1a701625a852cd286f
25072 Author: Stefan Roese <sr@denx.de>
25073 Date: Wed Mar 21 13:38:59 2007 +0100
25075 [PATCH] Add AMCC PPC405EZ support
25077 This patch adds support for the new AMCC 405EZ PPC. It is in
25078 preparation for the AMCC Acadia board support.
25080 Please note that this Acadia/405EZ support is still in a beta stage.
25081 Still lot's of cleanup needed but we need a preliminary release now.
25083 Signed-off-by: Stefan Roese <sr@denx.de>
25085 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
25086 Author: Heiko Schocher <hs@pollux.denx.de>
25087 Date: Wed Mar 21 08:45:17 2007 +0100
25089 [PATCH] TQM8272: dont change the bits given from the HRCW
25090 for the SIUMCR and BCR Register.
25091 Fix the calculation for the EEprom Size
25093 Signed-off-by: Heiko Schocher <hs@denx.de>
25095 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
25096 Author: Aubrey Li <aubrey.adi@gmail.com>
25097 Date: Tue Mar 20 18:16:24 2007 +0800
25099 [Blackfin][PATCH] Add BF561 EZKIT board support
25101 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
25102 Author: Aubrey Li <aubrey.adi@gmail.com>
25103 Date: Mon Mar 19 22:55:58 2007 +0800
25105 [Blackfin][PATCH] minor cleanup
25107 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
25108 Author: Wolfgang Denk <wd@denx.de>
25109 Date: Mon Mar 19 13:10:08 2007 +0100
25111 Remove obsoleted POST files.
25113 Signed-off-by: Wolfgang Denk <wd@denx.de>
25115 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
25116 Author: Aubrey Li <aubrey.adi@gmail.com>
25117 Date: Mon Mar 19 01:26:11 2007 +0800
25119 [PATCH] Add flash chip M29W320ET/B support
25121 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
25122 Author: Aubrey Li <aubrey.adi@gmail.com>
25123 Date: Mon Mar 19 01:24:52 2007 +0800
25125 [Blackfin][PATCH] Add BF537 stamp board support
25127 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
25128 Author: Stefan Roese <sr@denx.de>
25129 Date: Fri Mar 16 21:11:42 2007 +0100
25131 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
25133 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
25134 DDR memory are dynamically programmed matching the total size
25135 of the equipped memory (DIMM modules).
25137 Signed-off-by: Stefan Roese <sr@denx.de>
25139 commit 76d1466f918b881cda2d259254761e73885093c2
25140 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25141 Date: Tue Mar 13 13:38:05 2007 +0100
25143 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
25144 boards in terms of unification.
25146 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25148 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
25149 Author: Wolfgang Denk <wd@denx.de>
25150 Date: Tue Mar 13 16:05:55 2007 +0100
25152 Make SC3 board build with 'make O='; use 'addcons' consistently
25153 (SC3 and Jupiter used to use 'addcon' instead).
25155 Signed-off-by: Wolfgang Denk wd@denx.de
25157 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
25158 Author: Heiko Schocher <hs@pollux.denx.de>
25159 Date: Tue Mar 13 09:40:59 2007 +0100
25161 [PATCH] update board config for jupiter Board:
25163 CONFIG_CMDLINE_EDITING,
25164 CFG_ENV_ADDR_REDUND activated
25166 Signed-off-by: Heiko Schocher <hs@denx.de>
25168 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
25169 Author: Aubrey Li <aubrey.adi@gmail.com>
25170 Date: Mon Mar 12 12:11:55 2007 +0800
25172 [Blackfin][PATCH] minor cleanup
25174 commit bfa5754a58477ac917d21527cd0f079d87cf188e
25175 Author: Aubrey Li <aubrey.adi@gmail.com>
25176 Date: Mon Mar 12 01:42:06 2007 +0800
25178 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
25180 commit 8440bb14581a294375c34b91b42512f9753d1130
25181 Author: Aubrey Li <aubrey.adi@gmail.com>
25182 Date: Mon Mar 12 00:25:14 2007 +0800
25184 [Blackfin][PATCH] code cleanup
25186 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
25187 Author: Michal Simek <monstr@monstr.eu>
25188 Date: Sun Mar 11 13:48:24 2007 +0100
25190 [Microblaze][PATCH] part 2
25192 interrupt controller support
25196 board information support
25198 booting image support
25200 adding support for Xilinx ML401
25202 commit 76316a318de91f6184e7c22a10e02d275ade2441
25203 Author: Michal Simek <monstr@monstr.eu>
25204 Date: Sun Mar 11 13:42:58 2007 +0100
25206 [Microblaze][PATCH]
25208 interrupt controller support
25212 board information support
25214 booting image support
25216 adding support for Xilinx ML401
25218 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
25219 Author: Aubrey Li <aubrey.adi@gmail.com>
25220 Date: Sat Mar 10 23:49:29 2007 +0800
25222 [Blackfin][PATCH] code cleanup
25224 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
25225 Author: Aubrey.Li <aubrey.adi@gmail.com>
25226 Date: Fri Mar 9 13:40:56 2007 +0800
25228 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
25230 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
25231 Author: Aubrey.Li <aubrey.adi@gmail.com>
25232 Date: Fri Mar 9 13:38:44 2007 +0800
25234 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
25236 commit 992423ab43c2bcf6b704853bd00af77450915e20
25237 Author: Stefan Roese <sr@denx.de>
25238 Date: Thu Mar 8 23:00:08 2007 +0100
25240 ppc4xx: Fix file mode of sequoia.c
25242 Signed-off-by: Stefan Roese <sr@denx.de>
25244 commit eb92f613556800f7483666db09d9a237ad911d4a
25245 Author: Wolfgang Denk <wd@pollux.denx.de>
25246 Date: Thu Mar 8 22:52:51 2007 +0100
25250 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
25251 Author: John Otken john@softadvances.com <john@softadvances.com>
25252 Date: Thu Mar 8 09:39:48 2007 -0600
25254 ppc4xx: Clear Sequoia/Rainier security engine reset bits
25256 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
25258 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
25259 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25260 Date: Thu Mar 8 16:26:52 2007 +0100
25262 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
25264 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25266 commit d9fc703246840c4b268debf48c334ba55c597dc0
25267 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25268 Date: Thu Mar 8 16:25:47 2007 +0100
25270 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
25272 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25274 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
25275 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25276 Date: Thu Mar 8 16:23:11 2007 +0100
25278 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
25280 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25282 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
25283 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25284 Date: Thu Mar 8 16:20:32 2007 +0100
25286 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
25288 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25290 commit f9fc6a5852a6335840882fa2111925010eea1abe
25291 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25292 Date: Wed Mar 7 15:32:01 2007 +0100
25294 fixed ethernet phy configuration for plu405 board
25296 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25298 commit 769104c9356594deb2092e204a39c05b33202d6c
25299 Author: Wolfgang Denk <wd@pollux.denx.de>
25300 Date: Thu Mar 8 21:49:27 2007 +0100
25304 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
25305 Author: Stefan Roese <sr@denx.de>
25306 Date: Thu Mar 8 10:13:16 2007 +0100
25308 [PATCH] Update AMCC Luan 440SP eval board support
25310 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
25311 inititializition. This includes DDR auto calibration and support
25312 for different DIMM modules, instead of the fixed setup used in
25313 the earlier version.
25315 This patch also enables the cache in FLASH for the startup
25316 phase of U-Boot (while running from FLASH). After relocating to
25317 SDRAM the cache is disabled again. This will speed up the boot
25318 process, especially the SDRAM setup, since there are some loops
25319 for memory testing (auto calibration).
25321 Signed-off-by: Stefan Roese <sr@denx.de>
25323 commit 2f5df47351910a2936c7741cf111855829200943
25324 Author: Stefan Roese <sr@denx.de>
25325 Date: Thu Mar 8 10:10:18 2007 +0100
25327 [PATCH] Update AMCC Yucca 440SPe eval board support
25329 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
25330 inititializition. This includes DDR auto calibration and support
25331 for different DIMM modules, instead of the fixed setup used in
25332 the earlier version.
25334 Signed-off-by: Stefan Roese <sr@denx.de>
25336 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
25337 Author: Stefan Roese <sr@denx.de>
25338 Date: Thu Mar 8 10:07:18 2007 +0100
25340 ppc4xx: Small AMCC Katmai 440SPe update
25342 Signed-off-by: Stefan Roese <sr@denx.de>
25344 commit df294497479b1dca6dd86318b2a912f72fede0df
25345 Author: Stefan Roese <sr@denx.de>
25346 Date: Thu Mar 8 10:06:09 2007 +0100
25348 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
25350 Signed-off-by: Stefan Roese <sr@denx.de>
25352 commit 83853178bd36bca6f0f8f1331476620c84a587fc
25353 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
25354 Date: Wed Mar 7 12:14:50 2007 -0600
25356 net - Support ping reply when processing net-loop
25358 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
25360 This permits the ping command to test the phy interface when the phy
25361 is put in loopback mode (typically by setting register 0 bit 14).
25363 It also allows the port to respond to an external ping when u-boot is
25364 processing some other net command (such as tftp). This is useful when
25365 tftp appears to hang.
25367 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
25368 Signed-off-by: Ben Warren <bwarren@qstreams.com>
25370 commit fa1aef15bcd47736687be1af544506e90fba545d
25371 Author: Stefan Roese <sr@denx.de>
25372 Date: Wed Mar 7 16:43:00 2007 +0100
25374 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
25376 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
25377 DDR memory are dynamically programmed matching the total size
25378 of the equipped memory (DIMM modules).
25380 Signed-off-by: Stefan Roese <sr@denx.de>
25382 commit e2ebe696818939e2b974628be9c921ea3fe9de13
25383 Author: Stefan Roese <sr@denx.de>
25384 Date: Wed Mar 7 16:39:36 2007 +0100
25386 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
25388 This patch fixes a problem that occurs when 2 DIMM's are
25389 used. This problem was first spotted and fixed by Gerald Jackson
25390 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
25391 problem in a little more clever way.
25393 This patch also adds the nice functionality to dynamically
25394 create the TLB entries for the SDRAM (tlb.c). So we should
25395 never run into such problems with wrong (too short) TLB
25396 initialization again on these platforms.
25398 As this feature is new to the "old" 44x SPD DDR driver, it
25399 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
25401 Signed-off-by: Stefan Roese <sr@denx.de>
25403 commit 39218433983417b9df087976a79e3f80dd5e83d6
25404 Author: Wolfgang Denk <wd@denx.de>
25405 Date: Wed Mar 7 16:33:44 2007 +0100
25407 UC101: fix compiler warnings
25409 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
25410 Author: Wolfgang Denk <wd@pollux.denx.de>
25411 Date: Wed Mar 7 16:19:46 2007 +0100
25413 HMI1001: fix build error, cleanup compiler warnings.
25415 commit ad5bb451ade552c44bef9119d907929ebc2c126f
25416 Author: Wolfgang Denk <wd@pollux.denx.de>
25417 Date: Tue Mar 6 18:08:43 2007 +0100
25419 Restructure POST directory to support of other CPUs, boards, etc.
25421 commit a5284efd125967675b2e9c6ef7b95832268ad360
25422 Author: Wolfgang Denk <wd@pollux.denx.de>
25423 Date: Tue Mar 6 18:01:47 2007 +0100
25425 Fix HOSTARCH handling.
25426 Patch by Mike Frysinger, Mar 05 2007
25428 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
25429 Author: Stefan Roese <sr@denx.de>
25430 Date: Tue Mar 6 07:47:04 2007 +0100
25432 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
25434 As provided by the AMCC applications team, this patch optimizes the
25435 DDR2 setup for 166MHz bus speed. The values provided are also save
25436 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
25437 setup has to be adjusted as done in this patch.
25439 For this the NAND booting version had to include the "speed.c" file
25440 from the cpu/ppc4xx directory. With this addition the NAND SPL image
25441 will just fit into the 4kbytes of program space. gcc version 4.x as
25442 provided with ELDK 4.x is needed to generate this optimized code.
25444 Signed-off-by: Stefan Roese <sr@denx.de>
25446 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
25447 Author: Wolfgang Denk <wd@pollux.denx.de>
25448 Date: Sun Mar 4 01:36:05 2007 +0100
25452 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
25453 Author: Kim Phillips <kim.phillips@freescale.com>
25454 Date: Wed Feb 28 00:02:04 2007 -0600
25456 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
25458 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
25460 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
25461 Author: Kumar Gala <galak@kernel.crashing.org>
25462 Date: Tue Feb 27 23:51:42 2007 -0600
25464 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
25466 The config value for:
25474 Were not being used when setting the appropriate register
25477 * CFG_SCCR_USBMPHCM
25482 To allow full config of the SCCR.
25484 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
25485 that were just bogus.
25487 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25489 commit d51b3cf371cd441030460ef19d36b2924c361b1a
25490 Author: Kim Phillips <kim.phillips@freescale.com>
25491 Date: Thu Feb 22 20:06:57 2007 -0600
25493 mpc83xx: update [local-]mac-address properties on UEC based devices
25495 8360 and 832x weren't updating their [local-]mac-address
25496 properties. This patch fixes that.
25498 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25500 commit 61f4f912acbe60776c5e00df1ec94094ce672957
25501 Author: Timur Tabi <timur@freescale.com>
25502 Date: Tue Feb 13 10:41:42 2007 -0600
25504 mpc83xx: write MAC address to mac-address and local-mac-address
25506 Some device trees have a mac-address property, some have local-mac-address,
25507 and some have both. To support all of these device trees, this patch
25508 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
25509 This function already updates local-mac-address.
25511 Signed-off-by: Timur Tabi <timur@freescale.com>
25513 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
25514 Author: Kim Phillips <kim.phillips@freescale.com>
25515 Date: Tue Feb 27 18:41:08 2007 -0600
25517 mpc83xx: add command line editing by default
25519 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
25520 Author: Kim Phillips <kim.phillips@freescale.com>
25521 Date: Wed Feb 14 19:50:53 2007 -0600
25523 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
25525 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
25526 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
25528 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
25530 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25531 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
25533 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
25534 Author: Xie Xiaobo <r63061@freescale.com>
25535 Date: Wed Feb 14 18:27:17 2007 +0800
25537 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
25539 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
25540 it pass DDR/DDR2 compliance tests.
25542 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
25544 commit b110f40bd180c6b560276589beedf753e97c46ce
25545 Author: Xie Xiaobo <r63061@freescale.com>
25546 Date: Wed Feb 14 18:27:06 2007 +0800
25548 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
25550 MPC8360E rev2.0 have new spridr,and PVR value,
25551 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
25553 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
25555 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
25556 Author: Xie Xiaobo <r63061@freescale.com>
25557 Date: Wed Feb 14 18:26:44 2007 +0800
25559 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
25561 MPC8349E rev3.1 have new spridr,and PVR value,
25562 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
25564 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
25566 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
25567 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
25568 Date: Wed Jan 31 11:04:19 2007 +0100
25570 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
25572 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
25573 which is used to se if an slave will ACK after receiving its address.
25575 Correct i2c probing to use this method as the old method could upset
25576 a slave as it wrote a data byte to it.
25578 Add a small delay in i2c_init() to let the controller
25579 shutdown any ongoing I2C activity.
25581 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
25583 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
25584 Author: Timur Tabi <timur@freescale.com>
25585 Date: Wed Jan 31 15:54:29 2007 -0600
25587 mpc83xx: Add support for the MPC8349E-mITX-GP
25589 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
25590 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
25591 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
25593 Signed-off-by: Timur Tabi <timur@freescale.com>
25595 commit fab16807adad350f618024350c6950165c247c72
25596 Author: Timur Tabi <timur@freescale.com>
25597 Date: Wed Jan 31 15:54:20 2007 -0600
25599 mpc83xx: Delete sdram_init() for MPC8349E-mITX
25601 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
25602 never does anything. This patch deletes it.
25604 Signed-off-by: Timur Tabi <timur@freescale.com>
25606 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
25607 Author: Dave Liu <daveliu@freescale.com>
25608 Date: Fri Jan 19 10:43:26 2007 +0800
25610 mpc83xx: Fix the LAW1/3 bug
25612 The patch solves the alignment problem of the local bus access windows to
25613 render accessible the memory bank and PHY registers of UPC 1 (starting at
25614 0xf801 0000). What we actually did was to adjust the sizes of the bus
25615 access windows so that the base address alignment requirement would be met.
25617 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
25618 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
25619 Signed-off-by: Dave Liu <daveliu@freescale.com>
25621 commit 97c4b397dce236a7318b304667bf89e59d08b17c
25622 Author: Kim Phillips <kim.phillips@freescale.com>
25623 Date: Tue Jan 30 16:15:31 2007 -0600
25625 mpc83xx: don't hang if watchdog configured on 8360, 832x
25627 don't hang if watchdog configured on 8360, 832x
25629 The watchdog programming model is the same across all 83xx devices;
25630 make the code reflect that.
25632 commit b70047478570e371ce7223be342ce98afea0f7d6
25633 Author: Kim Phillips <kim.phillips@freescale.com>
25634 Date: Tue Jan 30 16:15:21 2007 -0600
25636 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
25638 protect memcpy to bad address if a local-mac-address is missing from dt
25640 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
25641 Author: Kim Phillips <kim.phillips@freescale.com>
25642 Date: Tue Jan 30 16:15:04 2007 -0600
25644 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
25646 make 8360 default environment fdt be 8360 (not 8349)
25648 commit a28899c910024a0226331df07207b1038c300c93
25649 Author: Emilian Medve <Emilian.Medve@freescale.com>
25650 Date: Tue Jan 30 16:14:50 2007 -0600
25652 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
25654 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
25655 be used for busy-waiting since it strips the 'volatile' property from
25656 the bd variable. gcc3 was working by pure luck.
25658 This is a follow on patch to "Fix the UEC driver bug of QE"
25660 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
25661 Author: Kumar Gala <galak@kernel.crashing.org>
25662 Date: Tue Jan 30 14:08:30 2007 -0600
25664 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
25666 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
25667 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
25668 CONFIG_MPC834X so they are more generic.
25670 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25672 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
25673 Author: Kim Phillips <kim.phillips@freescale.com>
25674 Date: Thu Jan 25 13:40:55 2007 -0600
25676 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
25678 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
25679 Author: Kim Phillips <kim.phillips@freescale.com>
25680 Date: Wed Jan 24 17:18:37 2007 -0600
25682 mpc83xx: sort Makefile targets
25684 reordered targets alphabetically
25686 commit 91e25769771c1164ed63ffca0add49f934ae3343
25687 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
25688 Date: Tue Jan 16 11:38:14 2007 -0500
25690 mpc83xx: U-Boot support for Wind River SBC8349
25692 I've redone the SBC8349 support to match git-current, which
25693 incorporates all the MPC834x updates from Freescale since the 1.1.6
25694 release, including the DDR changes.
25696 I've kept all the SBC8349 files as parallel as possible to the
25697 MPC8349EMDS ones for ease of maintenance and to allow for easy
25698 inspection of what was changed to support this board. Hence the SBC8349
25699 U-Boot has FDT support and everything else that the MPC8349EMDS has.
25701 Fortunately the Freescale updates added support for boards using CS0,
25702 but I had to change spd_sdram.c to allow for board specific settings for
25703 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
25704 default if the board doesn't specify a value.)
25706 Hopefully this should be mergeable as-is and require no whitespace
25707 cleanups or similar, but if something doesn't measure up then let me
25708 know and I'll fix it.
25713 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
25714 Author: Sam Song <samsongshu@yahoo.com.cn>
25715 Date: Thu Dec 14 19:03:21 2006 +0800
25717 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
25719 A redundant semicolon existed in mpc8349itx.c
25722 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
25724 commit f35f358241c549be3f75cfe2eaa642914275b7ba
25725 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
25726 Date: Wed Dec 6 21:23:55 2006 -0500
25728 mpc83xx: Put the version (and magic) after the HRCW.
25730 Put the version (and magic) after the HRCW. This puts it in a fixed
25731 location in flash, not at the start of flash but as close as we can get.
25733 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
25735 commit 48aecd969171a6e99a55fae04933857787f9a5bd
25736 Author: Dave Liu <r63238@freescale.com>
25737 Date: Thu Dec 7 21:14:51 2006 +0800
25739 mpc83xx: Add the MPC832XEMDS board readme
25741 Add the MPC832XEMDS board readme
25743 Signed-off-by: Dave Liu <daveliu@freescale.com>
25745 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
25746 Author: Dave Liu <r63238@freescale.com>
25747 Date: Thu Dec 7 21:13:15 2006 +0800
25749 mpc83xx: Add support for the MPC832XEMDS board
25751 This patch supports DUART, ETH3/4 and PCI etc.
25753 Signed-off-by: Dave Liu <daveliu@freescale.com>
25755 commit e080313c32322e15ab5a18eb896a252858c57284
25756 Author: Dave Liu <r63238@freescale.com>
25757 Date: Thu Dec 7 21:11:58 2006 +0800
25759 mpc83xx: streamline the 83xx immr head file
25761 For better format and style, I streamlined the 83xx head files,
25762 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
25763 duplicated macro definition appear in the both files; 2) the structure
25764 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
25765 macro definition put inside the each structure. So, I cleaned up the
25766 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
25767 moved the macro definition to mpc83xx.h, Just like MPC8260.
25771 *streamline the 83xx immr head file
25773 Signed-off-by: Dave Liu <daveliu@freescale.com>
25775 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
25776 Author: Dave Liu <r63238@freescale.com>
25777 Date: Wed Dec 6 11:38:17 2006 +0800
25779 mpc83xx: Fix the UEC driver bug of QE
25781 The patch prevents the GCC tool chain from striping useful code for
25782 optimization. It will make UEC ethernet driver workable, Otherwise the
25783 UEC will fail in tx when you are using gcc4.x. but the driver can work
25784 when using gcc3.4.3.
25788 *Prevent the GCC from striping code for optimization, Otherwise the UEC
25789 will tx failed when you are using gcc4.x.
25791 Signed-off-by: Dave Liu <daveliu@freescale.com>
25793 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
25794 Author: Stefan Roese <sr@denx.de>
25795 Date: Thu Mar 1 21:11:36 2007 +0100
25797 [PATCH] Update AMCC Katmai 440SPe eval board support
25799 This patch updates the recently added Katmai board support. The biggest
25800 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
25803 Please note, that still some problems are left with some memory
25804 configurations. See the driver for more details.
25806 Signed-off-by: Stefan Roese <sr@denx.de>
25808 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
25809 Author: Stefan Roese <sr@denx.de>
25810 Date: Thu Mar 1 07:03:25 2007 +0100
25812 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
25814 Signed-off-by: Stefan Roese <sr@denx.de>
25816 commit ccbc7036648e465697ca298ba51e0e76dda352a0
25817 Author: Wolfgang Denk <wd@pollux.denx.de>
25818 Date: Wed Feb 28 01:28:53 2007 +0100
25820 SC3: fix typo in default environment
25822 commit e344568b1b46af85ec32d815586f91bc115d6223
25823 Author: Sergei Poselenov <sposelenov@emcraft.com>
25824 Date: Tue Feb 27 20:15:30 2007 +0300
25826 MCC200: Fixes for update procedure
25828 - fix logic error in image type handling
25829 - make sure file system images (cramfs etc.) get stored in flash
25830 with image header stripped so they can be mounted through MTD
25832 commit 743571145b37182757d4e688a77860b36ee77573
25833 Author: Wolfgang Denk <wd@pollux.denx.de>
25834 Date: Tue Feb 27 14:26:04 2007 +0100
25836 Minor code cleanup.
25838 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
25839 Author: Sergei Poselenov <sposelenov@emcraft.com>
25840 Date: Tue Feb 27 12:40:16 2007 +0300
25842 MCC200 update - add LCD Progress Indicator
25844 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
25845 Author: Stefan Roese <sr@denx.de>
25846 Date: Thu Feb 22 07:43:34 2007 +0100
25848 [PATCH] get_dev() now unconditionally uses manual relocation
25850 Since the relocation fix is not included yet and we're not sure how
25851 it will be added, this patch removes code that required relocation
25852 to be fixed for now.
25854 Signed-off-by: Stefan Roese <sr@denx.de>
25856 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
25857 Author: Stefan Roese <sr@denx.de>
25858 Date: Thu Feb 22 07:40:23 2007 +0100
25860 [PATCH] Change systemace driver to select 8 & 16bit mode
25862 As suggested by Grant Likely this patch enables the Xilinx SystemACE
25863 driver to select 8 or 16bit mode upon startup.
25865 Signed-off-by: Stefan Roese <sr@denx.de>
25867 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
25868 Author: Haiying Wang <Haiying.Wang@freescale.com>
25869 Date: Wed Feb 21 16:52:31 2007 +0100
25871 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
25873 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
25874 is fully finished. The sync() is defined in each CPU's io.h file. For
25875 those CPUs which do not need sync for now, a dummy sync() is defined in
25876 their io.h as well.
25878 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
25880 commit da04995c7dc6772013a9a0dc5c767f190c402478
25881 Author: Stefan Roese <sr@denx.de>
25882 Date: Wed Feb 21 13:44:34 2007 +0100
25884 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
25886 Signed-off-by: Stefan Roese <sr@denx.de>
25888 commit 751bb57107d78978ae08e697c3deba816f5be091
25889 Author: Stefan Roese <sr@denx.de>
25890 Date: Tue Feb 20 13:21:57 2007 +0100
25892 [PATCH] Fix relocation problem with "new" get_dev() function
25894 This patch enables the "new" get_dev() function for block devices
25895 introduced by Grant Likely to be used on systems that still suffer
25896 from the relocation problems (manual relocation neede because of
25897 problems with linker script).
25899 Hopefully we can resolve this relocation issue soon for all platform
25900 so we don't need this additional code anymore.
25902 Signed-off-by: Stefan Roese <sr@denx.de>
25904 commit d93e2212f962668b3dce091ff5edc33f2347fe37
25905 Author: Stefan Roese <sr@denx.de>
25906 Date: Tue Feb 20 13:17:42 2007 +0100
25908 [PATCH] Update SystemACE driver for 16bit access
25910 This patch removes some problems when the Xilinx SystemACE driver
25911 is used with 16bit access on an big endian platform (like the
25914 Signed-off-by: Stefan Roese <sr@denx.de>
25916 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
25917 Author: Stefan Roese <sr@denx.de>
25918 Date: Tue Feb 20 13:15:40 2007 +0100
25920 [PATCH] Clean up Katmai (440SPe) linker script
25922 Signed-off-by: Stefan Roese <sr@denx.de>
25924 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
25925 Author: Stefan Roese <sr@denx.de>
25926 Date: Tue Feb 20 10:57:08 2007 +0100
25928 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
25930 Signed-off-by: Stefan Roese <sr@denx.de>
25932 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
25933 Author: Stefan Roese <sr@denx.de>
25934 Date: Tue Feb 20 10:51:26 2007 +0100
25936 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
25938 This patch switches to the desired I2C bus when the date/dtt
25939 commands are called. This can be configured using the
25940 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
25942 Signed-off-by: Stefan Roese <sr@denx.de>
25944 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
25945 Author: Stefan Roese <sr@denx.de>
25946 Date: Tue Feb 20 10:43:34 2007 +0100
25948 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
25950 This patch adds support for the DDR2 controller used on the
25951 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
25952 board and works fine with the following DIMM modules:
25954 - Corsair CM2X512-5400C4 (512MByte per DIMM)
25955 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
25956 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
25958 This patch also adds the nice functionality to dynamically
25959 create the TLB entries for the SDRAM (tlb.c). So we should
25960 never run into such problems with wrong (too short) TLB
25961 initialization again on these platforms.
25963 Signed-off-by: Stefan Roese <sr@denx.de>
25965 commit 36d830c9830379045f5daa9f542ac1c990c70068
25966 Author: Stefan Roese <sr@denx.de>
25967 Date: Tue Feb 20 10:35:42 2007 +0100
25969 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
25971 Since the existing 4xx SPD SDRAM initialization routines for the
25972 405 SDRAM controller and the 440 DDR controller don't have much in
25973 common this patch splits both drivers into different files.
25975 This is in preparation for the 440 DDR2 controller support (440SP/e).
25977 Signed-off-by: Stefan Roese <sr@denx.de>
25979 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
25980 Author: Stefan Roese <sr@denx.de>
25981 Date: Tue Feb 20 10:27:08 2007 +0100
25983 [PATCH] PPC4xx: Add support for multiple I2C busses
25985 This patch adds support for multiple I2C busses on the PPC4xx
25986 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
25987 to make use of this feature.
25989 It also merges the 405 and 440 i2c header files into one common
25992 Also the 4xx i2c reset procedure is reworked since I experienced
25993 some problems with the first access on the 440SPe Katmai board.
25995 Signed-off-by: Stefan Roese <sr@denx.de>
25997 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
25998 Author: Grant Likely <grant.likely@secretlab.ca>
25999 Date: Tue Feb 20 09:05:45 2007 +0100
26001 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
26003 Block device read/write is anonymous data; there is no need to use a
26004 typed pointer. void * is fine. Also add a hook for block_read functions
26006 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26008 commit 53758fa20e935cc87eeb0519ed365df753a6f289
26009 Author: Grant Likely <grant.likely@secretlab.ca>
26010 Date: Tue Feb 20 09:05:38 2007 +0100
26012 [PATCH 8_9] Add block_write hook to block_dev_desc_t
26014 Preparation for future patches which support block device writing
26016 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26018 commit f4852ebe6ca946a509667eb68be42026f837be76
26019 Author: Grant Likely <grant.likely@secretlab.ca>
26020 Date: Tue Feb 20 09:05:31 2007 +0100
26022 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
26024 Register read/write does not need to be wrapped in a full function. The
26025 patch replaces them with macros.
26027 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26029 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
26030 Author: Grant Likely <grant.likely@secretlab.ca>
26031 Date: Tue Feb 20 09:05:23 2007 +0100
26033 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
26035 The code in this file is not a command; it is a device driver. Put it in
26036 the correct place. There are zero functional changes in this patch, it
26037 only moves the file.
26039 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26041 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
26042 Author: Grant Likely <grant.likely@secretlab.ca>
26043 Date: Tue Feb 20 09:05:16 2007 +0100
26045 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
26047 This patch is in preparation of additional changes to the sysace driver.
26048 May as well take this opportunity to fixup the inconsistent whitespace since
26049 this file is about to undergo major changes anyway.
26051 There are zero functional changes in this patch. It only cleans up the
26054 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26056 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
26057 Author: Grant Likely <grant.likely@secretlab.ca>
26058 Date: Tue Feb 20 09:05:07 2007 +0100
26060 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
26062 isprint is already defined in ctype.c
26064 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26066 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
26067 Author: Grant Likely <grant.likely@secretlab.ca>
26068 Date: Tue Feb 20 09:05:00 2007 +0100
26070 [PATCH 3_9] Move buffer print code from md command to common function
26072 Printing a buffer is a darn useful thing. Move the buffer print code
26073 into print_buffer() in lib_generic/
26075 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26077 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
26078 Author: Grant Likely <grant.likely@secretlab.ca>
26079 Date: Tue Feb 20 09:04:52 2007 +0100
26081 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
26083 Change the xilinx device drivers and board code to include config.h
26084 instead of xparameters.h directly. config.h always includes the
26085 correct xparameters file. This change reduces the posibility of
26086 including the wrong file when adding a new xilinx board port
26088 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26090 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
26091 Author: Grant Likely <grant.likely@secretlab.ca>
26092 Date: Tue Feb 20 09:04:34 2007 +0100
26094 [PATCH 1_4] Merge common get_dev() routines for block devices
26096 Each of the filesystem drivers duplicate the get_dev routine. This change
26097 merges them into a single function in part.c
26099 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26101 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
26102 Author: Wolfgang Denk <wd@pollux.denx.de>
26103 Date: Mon Feb 19 23:09:51 2007 +0100
26105 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
26106 as root file system images.
26108 commit 489c696ae7211218961d159e43e722d74c36fcbc
26109 Author: Sergei Poselenov <sposelenov@emcraft.com>
26110 Date: Wed Feb 14 14:30:28 2007 +0300
26112 MCC200: Extensions to Software Update Mechanism
26114 Update / extend Software Update Mechanism for MCC200 board:
26116 - Add support for rootfs image added. The environment variables
26117 "rootfs_st" and "rootfs_nd" can be used to override the default
26118 values of the image start and end.
26119 - Remove excessive key check code.
26122 commit 4be23a12f23f1372634edc3215137b09768b7949
26123 Author: Stefan Roese <sr@denx.de>
26124 Date: Mon Feb 19 08:23:15 2007 +0100
26126 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
26128 As spotted by Matthias Fuchs, the READY input should not be
26129 enabled for the NOR FLASH on the Sequoia board.
26131 Signed-off-by: Stefan Roese <sr@denx.de>
26133 commit 2605e90bf676d48123afe5719a846d2b52b24aac
26134 Author: Heiko Schocher <hs@pollux.denx.de>
26135 Date: Fri Feb 16 07:57:42 2007 +0100
26137 [PATCH] Added support for the jupiter board.
26139 Signed-off-by: Heiko Schocher <hs@denx.de>
26141 commit 497d012e5be0194e1084073d0081eb1a844796b2
26142 Author: Gary Jennejohn <garyj@pollux.denx.de>
26143 Date: Mon Feb 12 13:11:50 2007 +0100
26145 LPC2292: patch from Siemens.
26147 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
26148 Author: Stefan Roese <sr@denx.de>
26149 Date: Sat Feb 10 08:49:31 2007 +0100
26151 [PATCH] Add missing p3mx.h file to repository (ups)
26153 Signed-off-by: Stefan Roese <sr@denx.de>
26155 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
26156 Author: Bartlomiej Sieka <tur@semihalf.com>
26157 Date: Fri Feb 9 10:45:42 2007 +0100
26159 [Motion-PRO] Preliminary support for the Motion-PRO board.
26161 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
26162 Author: Stefan Roese <sr@denx.de>
26163 Date: Wed Feb 7 16:51:08 2007 +0100
26165 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
26167 Some boards that can have more than 768MBytes of SDRAM need to
26168 set "initrd_high", so that the initrd can be accessed by the
26171 Signed-off-by: Stefan Roese <sr@denx.de>
26173 commit 7372ca68227930d03cffa548310524cad5b96733
26174 Author: Stefan Roese <sr@denx.de>
26175 Date: Fri Feb 2 12:44:22 2007 +0100
26177 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
26179 Previously the strapping DCR/SDR was read to determine if the internal PCI
26180 arbiter is enabled or not. This strapping bit can be overridden, so now
26181 the current status is read from the correct DCR/SDR register.
26183 Signed-off-by: Stefan Roese <sr@denx.de>
26185 commit 2aa54f651a42d198673318f07a20c89a43e4d197
26186 Author: Stefan Roese <sr@denx.de>
26187 Date: Fri Feb 2 12:42:08 2007 +0100
26189 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
26191 Signed-off-by: Stefan Roese <sr@denx.de>
26193 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
26194 Author: Stefan Roese <sr@denx.de>
26195 Date: Thu Feb 1 13:22:41 2007 +0100
26197 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
26199 When PCI PNP is enabled the pci pnp configuration routine is called
26200 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
26201 problems with some PCI cards. For now disable the PCI PNP configuration.
26203 Signed-off-by: Stefan Roese <sr@denx.de>
26205 commit 2902fadade3be7659467e8d074048c6b7068f5c0
26206 Author: Stefan Roese <sr@denx.de>
26207 Date: Wed Jan 31 16:56:10 2007 +0100
26209 [PATCH] Update 440EPx/440GRx cpu detection
26211 Signed-off-by: Stefan Roese <sr@denx.de>
26213 commit d5ea287b02a6945c3977410e364a879dd1a555c8
26214 Author: Stefan Roese <sr@denx.de>
26215 Date: Wed Jan 31 16:38:04 2007 +0100
26217 [PATCH] Update esd cpci5200 files
26219 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
26221 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
26222 Author: Stefan Roese <sr@denx.de>
26223 Date: Wed Jan 31 16:37:34 2007 +0100
26225 [PATCH] Add support for esd mecp5200 board
26227 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
26229 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
26230 Author: Stefan Roese <sr@denx.de>
26231 Date: Wed Jan 31 12:38:50 2007 +0100
26233 [PATCH] Remove unneccessary yellowstone board config file
26235 Signed-off-by: Stefan Roese <sr@denx.de>
26237 commit e802594b6fa1b166308820c276b96dc0d7cc731c
26238 Author: Stefan Roese <sr@denx.de>
26239 Date: Tue Jan 30 17:06:10 2007 +0100
26241 [PATCH] Update Sequoia (440EPx) config file
26243 The config file now handles the 2nd target, the Rainier (440GRx)
26244 evaluation board better. Additionally the PPC input clock was
26245 adjusted to match the correct value of 33.0 MHz.
26247 Signed-off-by: Stefan Roese <sr@denx.de>
26249 commit 700200c67e73b83751418abe7815840dca8fd6cb
26250 Author: Stefan Roese <sr@denx.de>
26251 Date: Tue Jan 30 17:04:19 2007 +0100
26253 [PATCH] Merge Yosemite & Yellowstone board ports
26255 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
26256 share one config file and all board specific files. This way we
26257 don't have to maintain two different sets of files for nearly
26260 Signed-off-by: Stefan Roese <sr@denx.de>
26262 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
26263 Author: Stefan Roese <sr@denx.de>
26264 Date: Tue Jan 30 15:01:49 2007 +0100
26266 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
26268 SCPU doesn't use redundant environment in flash.
26270 Signed-off-by: Stefan Roese <sr@denx.de>
26272 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
26273 Author: Stefan Roese <sr@denx.de>
26274 Date: Tue Jan 30 12:51:07 2007 +0100
26276 [PATCH] alpr: Update alpr board config file
26278 Signed-off-by: Stefan Roese <sr@denx.de>
26280 commit f8db84f132b1e335f20f96138a1f09ed97b08664
26281 Author: Wolfgang Denk <wd@pollux.denx.de>
26282 Date: Tue Jan 30 00:50:40 2007 +0100
26284 LPC2292 SODIMM port coding style cleanup.
26286 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
26287 Author: Gary Jennejohn <garyj@pollux.denx.de>
26288 Date: Wed Jan 24 12:16:56 2007 +0100
26290 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
26292 commit 2daf046ba627f85f44195815778140039636244e
26293 Author: Bartlomiej Sieka <tur@semihalf.com>
26294 Date: Tue Jan 23 17:22:06 2007 +0100
26296 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
26298 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
26299 Author: Bartlomiej Sieka <tur@semihalf.com>
26300 Date: Tue Jan 23 14:21:14 2007 +0100
26302 [iDMR] Flash driver on initialisation write-protects some sectors,
26303 currently sectors 0-3. Sector 3 does not need to be protected, though
26304 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
26305 fixes this, i.e., only sectors 0-2 are protected.
26307 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
26308 Author: Bartlomiej Sieka <tur@semihalf.com>
26309 Date: Tue Jan 23 14:11:22 2007 +0100
26311 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
26312 "mii device" results in "Unexpected exception"). Fixing this properly
26313 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
26314 this commit disables MII commads for now.
26316 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
26317 Author: Bartlomiej Sieka <tur@semihalf.com>
26318 Date: Tue Jan 23 13:25:22 2007 +0100
26320 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
26321 Identification Register (CIR).
26323 commit fdef388758506765d4d6a7155c8f1584c63ff581
26324 Author: roy zang <tie-fei.zang@freescale.com>
26325 Date: Mon Jan 22 13:19:21 2007 +0800
26327 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
26328 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
26329 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
26332 commit a4012396645533aef218354eeba754dff0deace8
26333 Author: Wolfgang Denk <wd@pollux.denx.de>
26334 Date: Fri Jan 19 23:08:39 2007 +0100
26336 Minor code cleanup.
26338 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
26339 Author: Heiko Schocher <hs@pollux.denx.de>
26340 Date: Fri Jan 19 19:57:10 2007 +0100
26342 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
26344 Signed-off-by: Heiko Schocher <hs@denx.de>
26346 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
26347 Author: Heiko Schocher <hs@pollux.denx.de>
26348 Date: Fri Jan 19 18:05:26 2007 +0100
26350 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
26351 if you must swap the bytes between reading/writing.
26352 (Needed for the SC3 board)
26354 Signed-off-by: Heiko Schocher <hs@denx.de>
26356 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
26357 Author: Stefan Roese <sr@denx.de>
26358 Date: Thu Jan 18 16:05:47 2007 +0100
26360 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
26362 Signed-off-by: Stefan Roese <sr@denx.de>
26364 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
26365 Author: Stefan Roese <sr@denx.de>
26366 Date: Thu Jan 18 11:54:52 2007 +0100
26368 [PATCH] Update Prodrive P3Mx support
26370 Signed-off-by: Stefan Roese <sr@denx.de>
26372 commit 34167a36c29ee946b727465db5c014746a08e978
26373 Author: Stefan Roese <sr@denx.de>
26374 Date: Thu Jan 18 11:48:10 2007 +0100
26376 [PATCH] Add missing Taishan config file
26378 Signed-off-by: Stefan Roese <sr@denx.de>
26380 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
26381 Author: Heiko Schocher <hs@pollux.denx.de>
26382 Date: Thu Jan 18 11:28:51 2007 +0100
26384 [PATCH] Fix: Compilerwarnings for SC3 board.
26385 The EBC Configuration Register is now by CFG_EBC_CFG definable
26386 Added JFFS2 support for the SC3 board.
26388 Signed-off-by: Heiko Schocher <hs@denx.de>
26390 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
26391 Author: Stefan Roese <sr@denx.de>
26392 Date: Thu Jan 18 10:25:34 2007 +0100
26394 [PATCH] Add support for AMCC Taishan PPC440GX eval board
26396 Signed-off-by: Stefan Roese <sr@denx.de>
26398 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
26399 Author: Wolfgang Denk <wd@pollux.denx.de>
26400 Date: Tue Jan 16 18:30:50 2007 +0100
26402 Raname solidcard3 into sc3; add redundant env for sc3
26404 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
26405 Author: Wolfgang Denk <wd@pollux.denx.de>
26406 Date: Tue Jan 16 12:46:35 2007 +0100
26408 Update default environment for Solidcard3
26410 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
26411 Author: Stefan Roese <sr@denx.de>
26412 Date: Mon Jan 15 09:46:29 2007 +0100
26414 [PATCH] Fix 440SPe rev B detection from previous patch
26416 Signed-off-by: Stefan Roese <sr@denx.de>
26418 commit a443d31410c571ee8f970da819a44d698fdd6b1f
26419 Author: Heiko Schocher <hs@pollux.denx.de>
26420 Date: Sun Jan 14 13:35:31 2007 +0100
26422 [FIX] correct I2C Writes for the LM81 Sensor.
26424 Signed-off-by: Heiko Schocher <hs@denx.de>
26426 commit 0bba5452835f19a61204edcda3a58112fd8e2208
26427 Author: Wolfgang Denk <wd@pollux.denx.de>
26428 Date: Sat Jan 13 11:17:10 2007 +0100
26430 Undo commit 3033ebb2: reset command does not take any arguments
26432 Haiying Wang's modification to the reset command was broken, undo it.
26434 Signed-off-by: Wolfgang Denk <wd@denx.de>
26436 commit 95981778cff0038fd9941044d6a3eda810e33258
26437 Author: Stefan Roese <sr@denx.de>
26438 Date: Sat Jan 13 08:01:03 2007 +0100
26440 [PATCH] Update 440SP(e) cpu revisions
26442 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
26444 Signed-off-by: Stefan Roese <sr@denx.de>
26446 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
26447 Author: Stefan Roese <sr@denx.de>
26448 Date: Sat Jan 13 07:59:56 2007 +0100
26450 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
26452 Now the board revision and the current PCI bus speed are printed after
26455 Also the EBC initialising is now done via defines in the board config
26458 Signed-off-by: Stefan Roese <sr@denx.de>
26460 commit 36adff362c2c0141ff8a810d42a7e478f779130f
26461 Author: Stefan Roese <sr@denx.de>
26462 Date: Sat Jan 13 07:59:19 2007 +0100
26464 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
26466 Now the board revision and the current PCI bus speed are printed after
26469 Also the EBC initialising is now done via defines in the board config
26472 Signed-off-by: Stefan Roese <sr@denx.de>
26474 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
26475 Author: Stefan Roese <sr@denx.de>
26476 Date: Sat Jan 13 07:57:51 2007 +0100
26478 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
26480 Now the board revision and the current PCI bus speed are printed after
26483 Signed-off-by: Stefan Roese <sr@denx.de>
26485 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
26486 Author: Heiko Schocher <hs@pollux.denx.de>
26487 Date: Thu Jan 11 15:44:44 2007 +0100
26489 Added support for the SOLIDCARD III board from Eurodesign
26491 Signed-off-by: Heiko Schocher <hs@denx.de>
26493 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
26494 Author: Reinhard Thies <Reinhard.Thies@web.de>
26495 Date: Wed Jan 10 14:41:14 2007 +0100
26497 Adjusted default environment for cam5200 board.
26499 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
26500 Author: Wolfgang Denk <wd@pollux.denx.de>
26501 Date: Wed Jan 10 15:35:52 2007 +0100
26505 commit 787fa15860a57833e50bd30555079a9cd4e519b8
26506 Author: Wolfgang Denk <wd@pollux.denx.de>
26507 Date: Wed Jan 10 01:28:39 2007 +0100
26509 Fix auto_update for MCC200 board.
26511 The invocation of do_auto_update() is moved to the end of the
26512 misc_init_r() function, after the flash mappings have been
26513 initialized. Please find attached a patch that implements that
26516 Also correct the decoding of the keypad status. With this update, the
26517 key that will trigger the update is Column 2, Row 2.
26519 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
26520 Author: Marian Balakowicz <m8@semihalf.com>
26521 Date: Wed Jan 10 00:26:15 2007 +0100
26523 CAM5200 flash driver modifications:
26524 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
26525 - add second build target 'cam5200_niosflash' which still uses custom driver
26527 commit 67fea022fa957f59653b5238c7496f80a6b70432
26528 Author: Markus Klotzbuecher <mk@denx.de>
26529 Date: Tue Jan 9 16:02:48 2007 +0100
26531 SPC1920: cleanup memory contoller setup
26533 commit 8fc2102faa23593c80381437c09f7745a14deb40
26534 Author: Markus Klotzbuecher <mk@denx.de>
26535 Date: Tue Jan 9 14:57:14 2007 +0100
26537 Fix the cpu speed setup to work with all boards.
26539 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
26540 Author: Markus Klotzbuecher <mk@denx.de>
26541 Date: Tue Jan 9 14:57:13 2007 +0100
26543 SPC1920: add support for the FM18L08 Ramtron FRAM
26545 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
26546 Author: Markus Klotzbuecher <mk@denx.de>
26547 Date: Tue Jan 9 14:57:13 2007 +0100
26549 SPC1920: update the HPI register addresses to work with the second
26550 generation of hardware
26552 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
26553 Author: Markus Klotzbuecher <mk@creamnet.de>
26554 Date: Tue Jan 9 14:57:13 2007 +0100
26556 Miscellanious spc1920 related cleanups
26558 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
26559 Author: Markus Klotzbuecher <mk@denx.de>
26560 Date: Tue Jan 9 14:57:12 2007 +0100
26562 SPC1920 GO/NOGO led should be set to color red in U-Boot
26564 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
26565 Author: Markus Klotzbuecher <mk@creamnet.de>
26566 Date: Tue Jan 9 14:57:12 2007 +0100
26568 Add support for the DS3231 RTC
26570 commit 8139567b60d678584b05f0718a681f2047c5e14f
26571 Author: Markus Klotzbuecher <mk@creamnet.de>
26572 Date: Tue Jan 9 14:57:11 2007 +0100
26574 SMC1 uses external CLK4 instead of BRG on spc1920
26576 commit d8d9de1a02fbd880b613d607143d1f57342affc7
26577 Author: Markus Klotzbuecher <mk@creamnet.de>
26578 Date: Tue Jan 9 14:57:10 2007 +0100
26580 Update the SPC1920 CMB PLD driver
26582 commit 3f34f869162750e5e999fd140f884f5de952bcfe
26583 Author: Markus Klotzbuecher <mk@creamnet.de>
26584 Date: Tue Jan 9 14:57:10 2007 +0100
26586 Add / enable I2C support on the spc1920 board
26588 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
26589 Author: Markus Klotzbuecher <mk@creamnet.de>
26590 Date: Tue Jan 9 14:57:10 2007 +0100
26592 Add support for the tms320671x host port interface (HPI)
26594 commit f4eb54529bb3664c3a562e488b460fe075f79d67
26595 Author: Wolfgang Denk <wd@pollux.denx.de>
26596 Date: Sun Jan 7 00:13:11 2007 +0100
26598 Prepare for release 1.2.0
26600 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
26601 Author: Stefan Roese <sr@denx.de>
26602 Date: Sat Jan 6 15:58:09 2007 +0100
26604 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
26606 This patch fixes a problem with an incorrect setup for the refresh
26607 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
26609 Signed-off-by: Stefan Roese <sr@denx.de>
26611 commit f16c1da9577f06c5fc08651a4065537407de4635
26612 Author: Stefan Roese <sr@denx.de>
26613 Date: Sat Jan 6 15:56:13 2007 +0100
26615 [PATCH] Update ALPR board files
26617 This update brings the ALPR board support to the newest version.
26618 It also fixes a problem with the NAND driver.
26620 Signed-off-by: Stefan Roese <sr@denx.de>
26622 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
26623 Author: Stefan Roese <sr@denx.de>
26624 Date: Fri Jan 5 11:46:05 2007 +0100
26626 [PATCH] nand: Fix problem with oobsize calculation
26628 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
26630 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
26631 returns a 0x15. In the code fragment below bits [1:0] determine the
26632 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
26633 next field is also ANDed with 0x3. However this is a one bit field
26634 as defined in the Hynix and Samsung parts in the 4th ID byte that
26635 determins the oobsize, not a two bit field. It works on Samsung as
26636 bits[3:2] are 01. However for the Hynix there is a 11 in these two
26637 bits, so the oob size gets messed up.
26639 I checked the correct linux code and the suggested fix from Brian is
26640 also available in the linux nand mtd driver.
26642 Signed-off-by: Stefan Roese <sr@denx.de>
26644 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
26645 Author: Stefan Roese <sr@denx.de>
26646 Date: Fri Jan 5 10:40:36 2007 +0100
26648 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
26650 This fix will make the MAL burst disabling patch for the Linux
26651 EMAC driver obsolete.
26653 Signed-off-by: Stefan Roese <sr@denx.de>
26655 commit 023889838282b6237b401664f22dd22dfba2c066
26656 Author: Stefan Roese <sr@denx.de>
26657 Date: Fri Jan 5 10:38:05 2007 +0100
26659 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
26661 This code will optimize the DDR2 controller setup on a board specific
26664 Note: This code doesn't work right now on the NAND booting image for the
26665 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
26667 Signed-off-by: Stefan Roese <sr@denx.de>
26669 commit cce4acbb68398634b8d011ed7bb0d12269c84230
26670 Author: Bartlomiej Sieka <tur@semihalf.com>
26671 Date: Thu Dec 28 19:08:21 2006 +0100
26674 - fix a typo in V38B config file
26675 - move watchdog initialisation earlier in the boot process
26676 - add "wdt=off" to default kernel command line (disables kernel watchdog)
26678 commit 92eb729bad876725aeea908d2addba0800620840
26679 Author: Wolfgang Denk <wd@pollux.denx.de>
26680 Date: Wed Dec 27 01:26:13 2006 +0100
26682 Fix bug in adaption of Stefano Babic's CFI driver patch.
26684 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
26685 Author: Wolfgang Denk <wd@pollux.denx.de>
26686 Date: Sun Dec 24 01:42:57 2006 +0100
26688 Minor code cleanup.
26690 commit d784fdb05900ada3686d5778783e1fb328e9fb66
26691 Author: Stefano Babic <sbabic@denx.de>
26692 Date: Tue Dec 12 00:22:42 2006 +0100
26694 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
26696 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
26697 Author: Stefan Roese <sr@denx.de>
26698 Date: Fri Dec 22 14:29:40 2006 +0100
26700 [PATCH] Fix sequoia flash autodetection (finally correct)
26702 Now 32MByte and 64MByte FLASH is know to work and other
26703 configurations should work too.
26705 Signed-off-by: Stefan Roese <sr@denx.de>
26707 commit 82e5236a8b719543643fd26d5827938ab2b94818
26708 Author: Wolfgang Denk <wd@pollux.denx.de>
26709 Date: Fri Dec 22 10:30:26 2006 +0100
26711 Minor code cleanup; update CHANGELOG.
26713 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
26714 Author: Heiko Schocher <hs@pollux.denx.de>
26715 Date: Thu Dec 21 17:17:02 2006 +0100
26717 Added support for the TQM8272 board from TQ
26719 Signed-off-by: Heiko Schocher <hs@denx.de>
26721 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
26722 Author: Heiko Schocher <hs@pollux.denx.de>
26723 Date: Thu Dec 21 16:14:48 2006 +0100
26725 [PATCH] Add support for the UC101 board from MAN.
26727 Signed-off-by: Heiko Schocher <hs@denx.de>
26729 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
26730 Author: Bartlomiej Sieka <tur@semihalf.com>
26731 Date: Wed Dec 20 00:29:43 2006 +0100
26733 Fix to make the baudrate changes immediate for the MCF52x2 family.
26735 commit daa6e418bcc0c717752e8de939c213c790286096
26736 Author: Bartlomiej Sieka <tur@semihalf.com>
26737 Date: Wed Dec 20 00:27:32 2006 +0100
26739 Preliminary support for the iDMR board (ColdFire).
26741 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
26742 Author: Andrei Safronov <safronov@pollux.denx.de>
26743 Date: Fri Dec 8 16:23:08 2006 +0100
26745 automatic update mechanism
26747 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
26748 Author: roy zang <tie-fei.zang@freescale.com>
26749 Date: Mon Dec 4 17:56:59 2006 +0800
26751 Slight code clean up.
26752 Add comments, delete duplicate define and remove spaces.
26753 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26755 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
26756 Author: roy zang <tie-fei.zang@freescale.com>
26757 Date: Mon Dec 4 17:54:21 2006 +0800
26759 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
26760 multiplier table can not refect the real PLL clock behavior of these
26761 processors. Please refer to the hardware specification for detailed
26762 information of the corresponding processors.
26763 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26765 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
26766 Author: roy zang <tie-fei.zang@freescale.com>
26767 Date: Mon Dec 4 14:46:23 2006 +0800
26769 Remove the static MAC address, ip address, server ip, netmask and
26770 gateway ip for network setting.
26771 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26773 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
26774 Author: roy zang <tie-fei.zang@freescale.com>
26775 Date: Mon Dec 4 14:33:08 2006 +0800
26777 Remove the duplicate memory test code for mpc744ihpc2 board.
26778 If a memory test is needed, please use the functions in
26779 post/memory.c or memtest command.
26780 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26782 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
26783 Author: roy zang <tie-fei.zang@freescale.com>
26784 Date: Fri Dec 1 19:01:25 2006 +0800
26786 Fix the exception occuring in RAM table search issue.
26787 The original search_one_table() function code can only processes the search
26788 for the exception occurring in FLASH/ROM, because the exception and fixup
26789 table usually locate in FLASH. If the exception address is also in
26790 FLASH, it will be OK.
26791 If the exception occurs in RAM, after the u-boot relocation, a
26792 relocation offset should be added.
26794 clean up the code in cpu/74xx_7xx/cpu.c
26796 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
26798 commit ee311214e0d216f904feea269599d0934bf71f23
26799 Author: roy zang <tie-fei.zang@freescale.com>
26800 Date: Fri Dec 1 11:47:36 2006 +0800
26802 Clean up the code according to codestyle:
26803 (1) remove some C++ comments.
26804 (2) remove trailing white space.
26805 (3) remove trailing empty line.
26806 (4) Indentation by table.
26807 (5) remove {} in one line condition.
26808 (6) add space before '(' in function call.
26809 Remove some weird printf () output.
26810 Add necessary comments.
26811 Modified Makefile to support building in a separate directory.
26813 commit dd520bf314c7add4183c5191692180f576f96b60
26814 Author: Wolfgang Denk <wd@pollux.denx.de>
26815 Date: Thu Nov 30 18:02:20 2006 +0100
26819 commit 8d9a8610b8256331132227e9e6585c6bd5742787
26820 Author: Wolfgang Denk <wd@pollux.denx.de>
26821 Date: Thu Nov 30 01:54:07 2006 +0100
26823 Code cleanup. Update CHANGELOG.
26825 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
26826 Author: Grant Likely <grant.likely@secretlab.ca>
26827 Date: Wed Nov 29 16:23:42 2006 +0100
26829 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
26831 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
26832 not the XLB frequency.
26834 This patch depends on the previous patches for MPC52xx device tree support
26836 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26837 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
26839 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
26840 Author: Stefan Roese <sr@denx.de>
26841 Date: Wed Nov 29 15:42:37 2006 +0100
26843 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
26845 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
26846 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
26847 quite similar and share the same board directory "prodrive/p3mx"
26848 and the same config file "p3mx.h".
26850 Signed-off-by: Stefan Roese <sr@denx.de>
26852 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
26853 Author: Stefan Roese <sr@denx.de>
26854 Date: Wed Nov 29 12:53:15 2006 +0100
26856 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
26858 In the bootvx command the load address was only read from the env
26859 variable "loadaddr" and not optionally passed as paramter as described
26860 in the help. This is fixed with this patch. The behaviour is now the
26861 same as in the bootelf command.
26863 Signed-off-by: Stefan Roese <sr@denx.de>
26865 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
26866 Author: Stefan Roese <sr@denx.de>
26867 Date: Wed Nov 29 12:03:57 2006 +0100
26869 [PATCH] include/ppc440.h minor error affecting interrupts
26871 Fixed include/ppc440.c for UIC address Bug
26873 Corrects bug affecting the addresses for the universal interrupt
26874 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
26876 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
26877 Signed-off-by: Stefan Roese <sr@denx.de>
26879 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
26880 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
26881 Date: Tue Nov 28 16:17:27 2006 -0600
26883 Make fsl-i2c not conflict with SOFT I2C
26885 Signed-off-by: Timur Tabi <timur@freescale.com>
26887 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
26888 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
26889 Date: Tue Nov 28 16:17:18 2006 -0600
26891 Fix I2C master address initialization.
26893 Signed-off-by: Timur Tabi <timur@freescale.com>
26895 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
26896 Author: Kim Phillips <kim.phillips@freescale.com>
26897 Date: Tue Nov 28 23:31:19 2006 -0600
26899 Assign maintainers for mpc8349emds and mpc8360emds
26901 Dave for mpc8360emds, and me for mpc8349emds.
26903 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
26904 Author: Kim Phillips <kim.phillips@freescale.com>
26905 Date: Tue Nov 28 23:28:33 2006 -0600
26907 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
26909 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
26910 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
26912 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
26913 Author: Timur Tabi <timur@freescale.com>
26914 Date: Tue Nov 28 12:09:35 2006 -0600
26916 mpc83xx: Miscellaneous code style fixes
26918 Implement various code style fixes and similar changes.
26920 Signed-off-by: Timur Tabi <timur@freescale.com>
26922 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
26923 Author: Stefan Roese <sr@denx.de>
26924 Date: Tue Nov 28 17:55:49 2006 +0100
26926 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
26928 This patch adds the code and configuration necessary to boot with an
26929 arch/powerpc Linux kernel.
26931 Signed-off-by: Grant Likely <grant.likely@gmail.com>
26932 Acked-by: Jon Loeliger <jdl@freescale.com>
26934 commit e732faec95a83cb468b4850ae807c8301dde8f6a
26935 Author: Stefan Roese <sr@denx.de>
26936 Date: Tue Nov 28 16:09:24 2006 +0100
26938 [PATCH] PPC4xx: 440SP Rev. C detection added
26940 Signed-off-by: Stefan Roese <sr@denx.de>
26942 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
26943 Author: Stefan Roese <sr@denx.de>
26944 Date: Tue Nov 28 11:04:45 2006 +0100
26946 [PATCH] nand: Fix patch merge problem
26948 Signed-off-by: Stefan Roese <sr@denx.de>
26950 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
26951 Author: Stefan Roese <sr@denx.de>
26952 Date: Tue Nov 28 11:04:45 2006 +0100
26954 [PATCH] nand: Fix patch merge problem
26956 Signed-off-by: Stefan Roese <sr@denx.de>
26958 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
26959 Author: Wolfgang Denk <wd@pollux.denx.de>
26960 Date: Mon Nov 27 22:53:53 2006 +0100
26964 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
26965 Author: Stefan Roese <sr@denx.de>
26966 Date: Mon Nov 27 17:43:25 2006 +0100
26968 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
26970 Patch below corrects the setting of the zmiifer register, it was
26971 overwritting the register rather than ORing the settings.
26973 Signed-off-by: Neil Wilson <NWilson@airspan.com>
26974 Signed-off-by: Stefan Roese <sr@denx.de>
26976 commit d1a72545296800b7e219f93104ad5836f0003d66
26977 Author: Stefan Roese <sr@denx.de>
26978 Date: Mon Nov 27 17:34:10 2006 +0100
26980 [PATCH] Select NAND embedded environment from board configuration
26982 The current NAND Bootloader setup forces the environment
26983 variables to be in line with the bootloader. This change
26984 enables the configuration to be made in the board include
26985 file instead so that it can be individually enabled.
26987 Signed-off-by: Nick Spence <nick.spence@freescale.com>
26988 Signed-off-by: Stefan Roese <sr@denx.de>
26990 commit 15784862857c3c2214498defcfed84ff137fb81e
26991 Author: Stefan Roese <sr@denx.de>
26992 Date: Mon Nov 27 17:22:19 2006 +0100
26994 [PATCH] nand_wait() timeout fixes
26996 Two fixes for the nand_wait() function in
26997 drivers/nand/nand_base.c:
26999 1. Use correct timeouts. The original timeouts in Linux
27000 source are 400ms and 20ms not 40s and 20s
27002 2. Return correct error value in case of timeout. 0 is
27005 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
27006 Signed-off-by: Stefan Roese <sr@denx.de>
27008 commit da5553b095bf04f4f109ad7e565dae3aba47b230
27009 Author: Stefan Roese <sr@denx.de>
27010 Date: Mon Nov 27 17:04:06 2006 +0100
27012 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
27014 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
27015 arguments to bootm. It removes the getenv("disable_of") test that used
27016 to be used for this purpose.
27018 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
27019 Acked-by: Jon Loeliger <jdl@freescale.com>
27021 commit a9398e018593782c5fa7d0741955fc1256b34c1e
27022 Author: Wolfgang Denk <wd@pollux.denx.de>
27023 Date: Mon Nov 27 15:32:42 2006 +0100
27025 Minor code cleanup. Update CHANGELOG.
27027 commit 1729b92cde575476684bffe819d0b7791b57bff2
27028 Author: Stefan Roese <sr@denx.de>
27029 Date: Mon Nov 27 14:52:04 2006 +0100
27031 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
27033 Signed-off-by: Stefan Roese <sr@denx.de>
27035 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
27036 Author: Stefan Roese <sr@denx.de>
27037 Date: Mon Nov 27 14:49:51 2006 +0100
27039 [PATCH] alpr: remove unused board specific flash driver
27041 Signed-off-by: Stefan Roese <sr@denx.de>
27043 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
27044 Author: Stefan Roese <sr@denx.de>
27045 Date: Mon Nov 27 14:48:41 2006 +0100
27047 [PATCH] 4xx: Fix problem with board specific reset code
27049 Signed-off-by: Stefan Roese <sr@denx.de>
27051 commit ec0c2ec725aec9524a177a77ce75559e644a931a
27052 Author: Stefan Roese <sr@denx.de>
27053 Date: Mon Nov 27 14:46:06 2006 +0100
27055 [PATCH] Remove testing 4xx enet PHY setup
27057 Signed-off-by: Stefan Roese <sr@denx.de>
27059 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
27060 Author: Stefan Roese <sr@denx.de>
27061 Date: Mon Nov 27 14:12:17 2006 +0100
27063 [PATCH] Update Prodrive ALPR board support (440GX)
27065 Signed-off-by: Stefan Roese <sr@denx.de>
27067 commit 58b485776698c3d71ec5a215e392123b4c15afa3
27068 Author: Markus Klotzbuecher <mk@denx.de>
27069 Date: Mon Nov 27 11:51:21 2006 +0100
27071 Add a small README with information on the generic ohci driver.
27073 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
27074 Author: Markus Klotzbuecher <mk@denx.de>
27075 Date: Mon Nov 27 11:46:46 2006 +0100
27077 Fix some endianness issues related to the generic ohci driver
27079 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
27080 Author: Markus Klotzbuecher <mk@denx.de>
27081 Date: Mon Nov 27 11:44:58 2006 +0100
27083 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
27084 to choose between the old and the generic OHCI drivers.
27086 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
27087 Author: Markus Klotzbuecher <mk@denx.de>
27088 Date: Mon Nov 27 11:43:09 2006 +0100
27090 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
27091 and adapted board configs TQM5200 and yosemite accordingly. This commit
27092 also makes the maximum number of root hub ports configurable
27093 (CFG_USB_OHCI_MAX_ROOT_PORTS).
27095 commit 78d620ebb5871d252270dedfad60c6568993b780
27096 Author: Wolfgang Denk <wd@atlas.denx.de>
27097 Date: Thu Nov 23 22:58:58 2006 +0100
27099 Updates for TQM5200 modules:
27100 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
27101 - simplify "udate" definitions
27103 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
27104 Author: Stefan Roese <sr@denx.de>
27105 Date: Wed Nov 22 13:20:50 2006 +0100
27107 [PATCH] PPC4xx start.S: Fix for processor errata
27109 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
27110 errata 1.12: 440_33 by moving patch up in code.
27112 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
27113 Signed-off-by: Stefan Roese <sr@denx.de>
27115 commit 4ef6251403f637841000e0fef9e832aa01339822
27116 Author: Stefan Roese <sr@denx.de>
27117 Date: Mon Nov 20 20:39:52 2006 +0100
27119 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
27121 Signed-off-by: Stefan Roese <sr@denx.de>
27123 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
27124 Author: Wolfgang Denk <wd@pollux.denx.de>
27125 Date: Mon Nov 20 10:28:30 2006 +0100
27129 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
27130 Author: Stefan Roese <sr@denx.de>
27131 Date: Mon Nov 13 13:55:24 2006 +0100
27133 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
27135 * Adds support for AMD command set Top Boot flash geometry reversal
27136 * Adds support for reading JEDEC Manufacturer ID and Device ID
27137 * Adds support for displaying command set, manufacturer id and
27138 device ids (flinfo)
27139 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
27140 * Removes outdated change history (refer to git log instead)
27142 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
27143 Signed-off-by: Stefan Roese <sr@denx.de>
27145 commit b21b511d4c50408f4853f46f06b601272196223f
27146 Author: Wolfgang Denk <wd@pollux.denx.de>
27147 Date: Sun Nov 12 21:13:23 2006 +0100
27151 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
27152 Author: Bartlomiej Sieka <tur@semihalf.com>
27153 Date: Sat Nov 11 22:48:22 2006 +0100
27155 Disable the watchdog in the default config for the V38B board.
27157 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
27158 Author: Bartlomiej Sieka <tur@semihalf.com>
27159 Date: Sat Nov 11 22:43:00 2006 +0100
27161 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
27162 group is enabled for USB earlier (in cpu_init_f() instead of
27163 usb_lowlevel_init()).
27165 commit 91650b3e4de688038d4f71279c44858e3e2c6870
27166 Author: Wolfgang Denk <wd@pollux.denx.de>
27167 Date: Mon Nov 6 17:06:36 2006 +0100
27169 Sequential accesses to non-existent memory must be synchronized,
27170 at least on G2 cores.
27172 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
27174 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
27175 Author: Timur Tabi <timur@freescale.com>
27176 Date: Fri Nov 3 19:15:00 2006 -0600
27178 mpc83xx: Update 83xx to use fsl_i2c.c
27180 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
27181 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
27182 Added multiple I2C bus support to fsl_i2c.c.
27184 Signed-off-by: Timur Tabi <timur@freescale.com>
27186 commit d239d74b1c937984bc519083a8e7de373a390f06
27187 Author: Timur Tabi <timur@freescale.com>
27188 Date: Fri Nov 3 12:00:28 2006 -0600
27190 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
27192 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
27193 tree matches the other 8xxx trees.
27195 Signed-off-by: Timur Tabi <timur@freescale.com>
27197 commit f7fb2e703ec9688541416962724adff70a7322cb
27198 Author: Kim Phillips <kim.phillips@freescale.com>
27199 Date: Thu Nov 2 19:47:11 2006 -0600
27201 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
27203 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
27204 Author: Dave Liu <daveliu@freescale.com>
27205 Date: Thu Nov 2 18:05:50 2006 -0600
27207 mpc83xx: Fix the incorrect dcbz operation
27209 The 834x rev1.x silicon has one CPU5 errata.
27211 The issue is when the data cache locked with
27212 HID0[DLOCK], the dcbz instruction looks like no-op inst.
27214 The right behavior of the data cache is when the data cache
27215 Locked with HID0[DLOCK], the dcbz instruction allocates
27218 The 834x rev3.0 and later and 8360 have not this bug inside.
27220 So, when 834x rev3.0/8360 are working with ECC, the dcbz
27221 instruction will corrupt the stack in cache, the processor will
27224 However, the 834x rev1.x can work with ECC with these code,
27225 because the sillicon has this cache bug. The dcbz will not
27226 corrupt the stack in cache.
27227 Really, it is the fault code running on fault sillicon.
27229 This patch fix the incorrect dcbz operation. Instead of
27230 CPU FP writing to initialise the ECC.
27233 * Fix the incorrect dcbz operation instead of CPU FP
27234 writing to initialise the ECC memory. Otherwise, it
27235 will corrupt the stack in cache, The processor will checkstop
27238 Signed-off-by: Dave Liu <daveliu@freescale.com>
27240 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
27241 Author: Kim Phillips <kim.phillips@freescale.com>
27242 Date: Wed Nov 1 00:10:40 2006 -0600
27244 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
27246 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
27247 STDOUT_PATH configuration bits to mpc8349emds,
27248 mpc8349itx, and mpc8360emds board code.
27250 redo environment to use bootm with the fdtaddr
27251 for booting ARCH=powerpc kernels by default,
27252 and provide default fdtaddr values.
27254 commit 48041365b3420589ad464ebc7752e0053538b729
27255 Author: Kim Phillips <kim.phillips@freescale.com>
27256 Date: Wed Nov 1 00:07:25 2006 -0600
27258 mpc83xx: change ft code to modify local-mac-address property
27260 Update 83xx OF code to update local-mac-address properties
27261 for ethernet instead of the obsolete 'address' property.
27263 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
27264 Author: Timur Tabi <timur@freescale.com>
27265 Date: Tue Oct 31 21:23:16 2006 -0600
27267 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
27269 This patch also adds an improved I2C set_speed(), which handles all clock
27272 Signed-off-by: Timur Tabi <timur@freescale.com>
27274 commit ac4b5622ce050b5ee1e154b98df630d778661632
27275 Author: Dave Liu <daveliu@freescale.com>
27276 Date: Tue Oct 31 19:54:59 2006 -0600
27278 mpc83xx: add the README.mpc8360emds
27280 add doc/README.mpc8360emds to accompany the new board support
27282 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
27283 Author: Dave Liu <daveliu@freescale.com>
27284 Date: Fri Nov 3 12:11:15 2006 -0600
27286 mpc83xx: add QE ethernet support
27288 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
27290 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
27291 Author: Dave Liu <daveliu@freescale.com>
27292 Date: Fri Nov 3 19:33:44 2006 -0600
27294 mpc83xx: Add MPC8360EMDS basic board support
27296 Add support for the Freescale MPC8360EMDS board.
27297 Includes DDR, DUART, Local Bus, PCI.
27299 commit 23892e49352de74f7fac36ff90bb1be143d195e3
27300 Author: Dave Liu <daveliu@freescale.com>
27301 Date: Tue Oct 31 19:30:40 2006 -0600
27303 mpc83xx: add the QUICC Engine (QE) immap file
27305 common QE immap file. Also required for 8360.
27307 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
27308 Author: Dave Liu <daveliu@freescale.com>
27309 Date: Tue Oct 31 19:25:38 2006 -0600
27311 mpc83xx: Add 8360 specifics to 83xx immap
27313 Mainly add QE device dependencies, with appropriate 8360 protection.
27316 commit 988833324a7fda482c8ac3ca23eb539f8232e404
27317 Author: Timur Tabi <timur@freescale.com>
27318 Date: Tue Oct 31 19:14:41 2006 -0600
27320 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
27322 PREREQUISITE PATCHES:
27324 * This patch can only be applied after the following patches have been applied:
27326 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
27327 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
27331 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
27332 the clock for the 2nd USB board (Linux kernel will hang otherwise),
27333 and fix the CONFIG_BOOTARGS macro.
27335 Signed-off-by: Timur Tabi <timur@freescale.com>
27337 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
27338 Author: Timur Tabi <timur@freescale.com>
27339 Date: Tue Oct 31 18:44:42 2006 -0600
27341 mpc83xx: Add support for the MPC8349E-mITX
27343 PREREQUISITE PATCHES:
27345 * This patch can only be applied after the following patches have been applied:
27347 1) DNX#2006090742000024 "Add support for multiple I2C buses"
27348 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
27349 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
27350 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
27351 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
27355 * Add support for the Freescale MPC8349E-mITX reference design platform.
27356 The second TSEC (Vitesse 7385 switch) is not supported at this time.
27358 Signed-off-by: Timur Tabi <timur@freescale.com>
27360 commit 183da6d9b446cc12123455844ad1187e2375626f
27361 Author: Ben Warren <bwarren@qstreams.com>
27362 Date: Tue Sep 12 10:15:53 2006 -0400
27364 Additional MPC8349 support for multibus i2c
27368 Here is a patch for a file that was accidentally left out of a previous
27371 It accompanies the patch with ticket DNX#2006090742000024
27374 Change PCI initialization to use new multi-bus I2C API.
27379 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
27380 Author: Ben Warren <bwarren@qstreams.com>
27381 Date: Thu Sep 7 16:51:04 2006 -0400
27383 Multi-bus I2C implementation of MPC834x
27387 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
27388 family and the MPC8349EMDS board in particular.
27389 This patch requires Patch 1 (Add support for multiple I2C buses).
27390 Testing was performed on a 533MHz board.
27392 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
27394 Signed-off-by: Ben Warren <bwarren@qstreams.com>
27397 Implemented driver-level code to support two I2C buses on the
27398 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
27399 are 50kHz, 100kHz and 400kHz on each bus.
27404 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
27405 Author: Ben Warren <bwarren@qstreams.com>
27406 Date: Thu Sep 7 16:50:54 2006 -0400
27408 Add support for multiple I2C buses
27412 Attached is a patch providing support for multiple I2C buses at the
27413 command level. The second part of the patch includes an implementation
27414 for the MPC834x CPU and MPC8349EMDS board.
27416 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
27418 Signed-off-by: Ben Warren <bwarren@qstreams.com>
27422 1. Include new 'i2c' command (based on USB implementation) using
27423 CONFIG_I2C_CMD_TREE.
27425 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
27426 the commands to change bus number and speed are only available under the
27427 new 'i2c' command mentioned in the first bullet.
27429 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
27430 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
27431 of an array of bus-device pairs. Otherwise, it is an array of uchar.
27434 Added new 'i2c' master command for all I2C interaction. This is
27435 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
27436 setting I2C bus speed as well as changing the active bus if the board
27437 has more than one (conditionally compiled with
27438 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
27444 commit bed85caf872714ebf53013967a695c9d63acfc68
27445 Author: Timur Tabi <timur@freescale.com>
27446 Date: Tue Oct 31 18:13:36 2006 -0600
27448 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
27452 * Errata DDR6, which affects all current MPC 834x processors, lists changes
27453 required to maintain compatibility with various types of DDR memory. This
27454 patch implements those changes.
27456 Signed-off-by: Timur Tabi <timur@freescale.com>
27458 commit afd6e470f639883002c7c59d562690a5cb0f4865
27459 Author: Timur Tabi <timur@freescale.com>
27460 Date: Wed Oct 25 18:45:23 2006 -0500
27462 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
27464 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
27465 Author: Timur Tabi <timur@freescale.com>
27466 Date: Tue Aug 22 17:07:00 2006 -0500
27468 mpc83xx: Add support for variable flash memory sizes on 83xx systems
27472 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
27473 window registers, instead of using a hard-coded value of 8MB.
27475 Signed-off-by: Timur Tabi <timur@freescale.com>
27477 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
27478 Author: Tanya Jiang <tanya.jiang@freescale.com>
27479 Date: Thu Aug 3 18:38:13 2006 +0800
27481 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
27483 Unified TQM834x variable names with 83xx and consolidated macro
27484 in preparation for the 8360 and other upcoming 83xx devices.
27486 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
27488 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
27489 Author: Dave Liu <daveliu@freescale.com>
27490 Date: Wed Oct 25 14:41:21 2006 -0500
27492 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
27494 Incorporated the common unified variable names and the changes in preparation
27495 for releasing mpc8360 patches.
27497 Signed-off-by: Dave Liu <daveliu@freescale.com>
27499 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
27500 Author: Tanya Jiang <tanya.jiang@freescale.com>
27501 Date: Thu Aug 3 18:36:02 2006 +0800
27503 mpc83xx: Fix missing build for mpc8349emds pci.c
27505 Make pci build for mpc8349emds
27507 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
27509 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
27510 Author: Tanya Jiang <tanya.jiang@freescale.com>
27511 Date: Thu Aug 3 18:39:49 2006 +0800
27513 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
27515 Removed unused file resetvec.S for mpc83xx cpu
27517 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
27519 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
27520 Author: Nick Spence <Nick.Spence@freescale.com>
27521 Date: Sat Sep 30 00:32:59 2006 -0700
27523 NAND Flash verify across block boundaries
27525 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
27527 and the write crosses a block boundary. The pointer to the verification
27528 buffer (bufstart) is not being updated to reflect the starting of the
27530 block so the verification of the second block fails.
27534 * Fix NAND FLASH page verification across block boundaries
27536 commit f484dc791a3932537213c43c654cc1295c64b84c
27537 Author: Nick Spence <nick.spence@freescale.com>
27538 Date: Thu Sep 7 07:39:46 2006 -0700
27540 Added RGMII support to the TSECs and Marvell 881111 Phy
27542 Added a phy initialization to adjust the RGMII RX and TX timing
27543 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
27545 Signed-off-by: Nick Spence <nick.spence@freescale.com>
27547 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
27548 Author: roy zang <tie-fei.zang@freescale.com>
27549 Date: Fri Nov 3 13:10:00 2006 +0800
27551 Remove some unused CFG define.
27552 undef CFG_DRAM_TEST
27554 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
27555 Author: roy zang <tie-fei.zang@freescale.com>
27556 Date: Fri Nov 3 13:07:36 2006 +0800
27558 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
27559 Both work. 0xFF000000 seems more reasonable.
27561 commit c59200443072353044aa4bf737a5a60f9a9af231
27562 Author: Wolfgang Denk <wd@pollux.denx.de>
27563 Date: Thu Nov 2 15:15:01 2006 +0100
27565 Release U-Boot 1.1.6
27567 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
27568 Author: roy zang <tie-fei.zang@freescale.com>
27569 Date: Thu Nov 2 19:14:48 2006 +0800
27571 This patch comes from Yuli's posted patch on 8/8/2006
27572 titled "CFI Driver Little-Endian write Issue".
27574 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
27576 If that patch applied, please discard this one.
27577 Until now , I do not see his patch is applied. So please apply this one.
27579 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
27580 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27582 commit b825f158e449e1e9cf74c08e572955e122394c96
27583 Author: roy zang <tie-fei.zang@freescale.com>
27584 Date: Thu Nov 2 19:12:31 2006 +0800
27586 Tsi108 on chip i2c support.
27588 The i2c Interface provides a master-only, serial interface that can be
27589 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
27592 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
27593 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27595 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
27596 Author: roy zang <tie-fei.zang@freescale.com>
27597 Date: Thu Nov 2 19:11:06 2006 +0800
27599 Tsi108 on chip pci controller support.
27601 If there is no pci card, the tsi108/109 pci configure read will
27602 cause a machine check exception to the processor. PCI error should
27603 also be cleared after the read.
27605 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
27606 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27608 commit d1927cee977126e547ceeba23e4f978f377cfb8f
27609 Author: roy zang <tie-fei.zang@freescale.com>
27610 Date: Thu Nov 2 19:08:55 2006 +0800
27612 Tundra tsi108 on chip Ethernet controller support.
27614 The following is a brief description of the Ethernet controller:
27615 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
27616 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
27617 to manage the two physical connection devices (PHYs). Each Ethernet port
27618 has its own statistics monitor that tracks and reports key interface
27619 statistics. Each port supports a 256-entry hash table for address
27620 filtering. In addition, each port is bridged to the Switch Fabric
27621 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
27623 Each Ethernet port also has a pair of internal Ethernet DMA channels to
27624 support the transmit and receive data flows. The Ethernet DMA channels
27625 use descriptors set up in memory, the memory map of the device, and
27626 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
27627 handles arbitration for the Switch Fabric. The Controller also
27628 has a register businterface for register accesses and status monitor
27631 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
27632 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
27633 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
27634 data flows to and from the Ethernet Controller through the Switch Fabric.
27636 Each Ethernet port uses its transmit and receive DMA channels to manage
27637 data flows through buffer descriptors that are predefined by the
27638 system (the descriptors can exist anywhere in the system memory map).
27639 These descriptors are data structures that point to buffers filled
27640 with data ready to transmit over Ethernet, or they point to empty
27641 buffers ready to receive data from Ethernet.
27643 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
27644 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27646 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
27647 Author: roy zang <tie-fei.zang@freescale.com>
27648 Date: Thu Nov 2 19:01:33 2006 +0800
27650 Tundra tsi108 header file.
27652 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
27653 PowerPC processors that offers numerous system interconnect options for
27654 embedded application designers. The Tsi108 can interconnect 60x or
27655 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
27656 and Flash. Provided the macro define for tsi108 chip.
27658 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
27659 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27661 commit 87c4db09699c6b89176b31004afcb83eb1585d47
27662 Author: roy zang <tie-fei.zang@freescale.com>
27663 Date: Thu Nov 2 18:59:15 2006 +0800
27665 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
27666 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
27668 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
27669 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27671 commit 27801b8ab11c61b577e45742a515bb3b23b80241
27672 Author: roy zang <tie-fei.zang@freescale.com>
27673 Date: Thu Nov 2 18:57:21 2006 +0800
27675 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
27676 Make ,config.mk and link file for the mpc7448hpc2 board.
27678 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
27679 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27681 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
27682 Author: roy zang <tie-fei.zang@freescale.com>
27683 Date: Thu Nov 2 18:55:04 2006 +0800
27685 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
27686 The mpc7448hpc2 board support header file.
27688 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
27689 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27691 commit 625bb5ddb50b243f931262ca8c46956409471917
27692 Author: roy zang <tie-fei.zang@freescale.com>
27693 Date: Thu Nov 2 18:52:21 2006 +0800
27695 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
27696 The mpc7448hpc2 board support low level assemble language init code.
27698 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
27699 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27701 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
27702 Author: roy zang <tie-fei.zang@freescale.com>
27703 Date: Thu Nov 2 18:49:51 2006 +0800
27705 General code modification for mpc7448hpc2 board support.
27706 1. Add 7447A and 7448 processor support.
27707 2. Add the following flags.
27709 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
27710 (such as by switch on board), this flag should be set.
27712 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
27713 relocates to RAM, this flag should be set.
27715 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
27716 system hang in exception, this flag should be set.
27718 There is a design issue for tsi108/109 pci configure read. When pci scan
27719 the slots, if there is no pci card, the tsi108/9 will cause a machine
27720 check exception for mpc7448 processor.
27722 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
27723 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27725 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
27726 Author: roy zang <tie-fei.zang@freescale.com>
27727 Date: Thu Nov 2 18:34:47 2006 +0800
27729 Add README file for mpc7448hpc2 board.
27730 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27732 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
27733 Author: Bartlomiej Sieka <tur@semihalf.com>
27734 Date: Wed Nov 1 02:04:38 2006 +0100
27736 Finish up support for MarelV38B board
27737 - add watchdog support
27738 - enable GPIO_WKUP_7 pin for input
27741 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
27742 Author: Bartlomiej Sieka <tur@semihalf.com>
27743 Date: Wed Nov 1 01:45:46 2006 +0100
27745 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
27746 * remove warnings when compiling ethaddr.c
27747 * adjust linker script (fixes a crash resulting from incorrect
27748 definition of __u_boot_cmd_start)
27749 - Some MarelV38B code cleanup.
27751 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
27752 Author: Bartlomiej Sieka <tur@semihalf.com>
27753 Date: Wed Nov 1 01:38:16 2006 +0100
27755 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
27756 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
27757 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
27758 MPC5XXX_WU_GPIO_DATA_O for affected boards.
27760 - Add defintions for some MPC5XXX GPIO pins.
27762 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
27763 Author: Bartlomiej Sieka <tur@semihalf.com>
27764 Date: Wed Nov 1 01:34:29 2006 +0100
27766 Changed MarelV38B board make target to lowercase. Config file cleanup.
27768 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
27769 Author: Wolfgang Denk <wd@pollux.denx.de>
27770 Date: Sun Oct 29 01:03:51 2006 +0200
27772 Automatically adjust ARFLAGS so "make -s" is really silent.
27774 commit fae684e89844856383bdf101440889557df3e6b1
27775 Author: Stefan Roese <sr@denx.de>
27776 Date: Sat Oct 28 16:45:00 2006 +0200
27778 [PATCH] omap925.c: Remove unused functions
27780 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
27781 Signed-off-by: Stefan Roese <sr@denx.de>
27783 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
27784 Author: Stefan Roese <sr@denx.de>
27785 Date: Sat Oct 28 17:12:58 2006 +0200
27787 [PATCH] Add some missing machtypes for netstar & voiceblue boards
27789 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
27792 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
27793 Signed-off-by: Stefan Roese <sr@denx.de>
27795 commit 856f054410cef52d868feb330168b2a4c4091328
27796 Author: Stefan Roese <sr@denx.de>
27797 Date: Sat Oct 28 15:55:52 2006 +0200
27799 [PATCH] NAND: Partition name support added to NAND subsystem
27801 chpart, nboot and NAND subsystem related commands now accept also partition
27802 name to specify offset.
27804 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
27805 Signed-off-by: Stefan Roese <sr@denx.de>
27807 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
27808 Author: Wolfgang Denk <wd@pollux.denx.de>
27809 Date: Sat Oct 28 02:29:44 2006 +0200
27813 commit 2751a95abd1b96911081c357e96a12fa97b40dee
27814 Author: Wolfgang Denk <wd@pollux.denx.de>
27815 Date: Sat Oct 28 02:29:14 2006 +0200
27817 Enable commandline editing and hush shell on all TQM boards.
27819 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
27820 Author: Wolfgang Denk <wd@pollux.denx.de>
27821 Date: Sat Oct 28 02:28:02 2006 +0200
27823 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
27825 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
27826 Author: Wolfgang Denk <wd@denx.de>
27827 Date: Sat Oct 28 01:14:32 2006 +0200
27829 Check for illegal character '=' in environment variable names.
27831 Make sure the string passed as variable name does not contain a '='
27832 character. This not only prevents the common error or typing
27833 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
27834 also closes a backdoor which allowed to delete write-protected
27835 environment variables, for example by using "setenv ethaddr=".
27837 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
27838 Author: Wolfgang Denk <wd@pollux.denx.de>
27839 Date: Sat Oct 28 00:38:39 2006 +0200
27841 Minor code cleanup.
27843 commit e11887a77d81077416a2d1c5e0354916fee8c034
27844 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27845 Date: Thu Oct 26 17:55:31 2006 +0200
27847 Don't pass any debug options directly to the assembler
27849 When passing the -g option to gcc, gcc automatically selects a
27850 suitable --g<format> option to pass on to the assembler.
27851 Thus, there's no point in forcing a specific debug option on the
27852 assembler using the -Wa mechanism.
27854 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27856 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
27857 Author: Jon Loeliger <jdl@freescale.com>
27858 Date: Fri Oct 27 07:47:22 2006 -0500
27860 MPC86xx: Cleaned up unused and conditionally used local variables.
27862 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27864 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
27865 Author: Wolfgang Denk <wd@pollux.denx.de>
27866 Date: Fri Oct 27 11:55:21 2006 +0200
27868 Fix "ar" flags in some Makefiles to allow for silent "make -s"
27870 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
27871 Author: Ben Warren <bwarren@qstreams.com>
27872 Date: Thu Oct 26 14:38:25 2006 -0400
27874 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
27875 to a TSEC (e.g. a switch is connected via RMII) or
27876 if the PHY is defective/incorrectly configured.
27878 Signed-off-by: Ben Warren <bwarren@qstreams.com>
27880 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
27881 Author: Ben Warren <bwarren@qstreams.com>
27882 Date: Thu Oct 26 14:38:25 2006 -0400
27884 Fix TSEC driver: avoid crashes if PHY is not attached
27885 to a TSEC (e.g. a switch is connected via RMII) or
27886 if the PHY is defective/incorrectly configured.
27888 Signed-off-by: Ben Warren <bwarren@qstreams.com>
27890 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
27891 Author: Wolfgang Denk <wd@pollux.denx.de>
27892 Date: Thu Oct 26 16:24:31 2006 +0200
27896 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
27897 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27898 Date: Wed Oct 25 15:48:59 2006 +0200
27900 Finish up support for the ATSTK1000/ATSTK1002 boards
27902 Add atstk1002_config target to Makefile and move the AVR32 section
27903 down below Blackfin so that it doesn't end up in the middle of
27906 Drop the autogenerated linker script thing for now. Will have to
27907 revisit how to handle chips with different flash and RAM layout
27910 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27912 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
27913 Author: Kumar Gala <galak@kernel.crashing.org>
27914 Date: Tue Oct 24 23:47:37 2006 -0500
27916 Added support for Multi-Image files that contain a device tree
27918 If a Multi-Image file contains a third image we try to use it as a
27919 device tree. The device tree image is assumed to be uncompressed in the
27920 image file. We automatically allocate space for the device tree in memory
27921 and provide an 8k pad to allow more than a reasonable amount of growth.
27923 Additionally, a device tree that was contained in flash will now automatically
27924 get copied to system memory as part of boot. Previously an error was
27925 reported if one tried to boot a device tree that was in flash.
27927 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27929 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
27930 Author: Wolfgang Denk <wd@denx.de>
27931 Date: Tue Oct 24 21:35:55 2006 +0200
27933 Switch to automatically generated CHANGELOG file.
27934 (use "make CHANGELOG" to update it from time to time)
27936 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
27937 Author: Stefan Roese <sr@denx.de>
27938 Date: Tue Oct 24 18:06:48 2006 +0200
27940 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
27941 Patch by Stefan Roese, 24 Oct 2006
27943 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
27944 Author: Wolfgang Denk <wd@pollux.denx.de>
27945 Date: Tue Oct 24 17:24:55 2006 +0200
27947 Merge with /home/wd/git/u-boot/master
27949 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
27950 Author: Wolfgang Denk <wd@pollux.denx.de>
27951 Date: Tue Oct 24 15:32:57 2006 +0200
27955 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
27956 Author: Wolfgang Denk <wd@pollux.denx.de>
27957 Date: Tue Oct 24 14:51:36 2006 +0200
27959 Move atstk1000 files into vendor specific directory.
27960 Patch by Haavard Skinnemoen, 12 Sep 2006
27962 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
27963 Author: Wolfgang Denk <wd@pollux.denx.de>
27964 Date: Tue Oct 24 14:42:37 2006 +0200
27966 Add ATSTK1000 and ATSTK1002 board support
27967 Patch by Haavard Skinnemoen, 06 Sep 2006
27969 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
27972 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
27973 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
27974 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
27975 CompactFlash cards. For more information, please see this page:
27977 http://www.atmel.com/dyn/products/tools.asp?family_id=682
27979 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
27982 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27984 commit f93ae788c3640fcde5db383471d45548ff4060d0
27985 Author: Wolfgang Denk <wd@pollux.denx.de>
27986 Date: Tue Oct 24 14:31:24 2006 +0200
27988 Add common serial driver for Atmel AT32 and AT91 chips
27989 Patch by Haavard Skinnemoen, 06 Sep 2006
27991 This is a first attempt at creating a common serial driver for Atmel
27992 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
27993 be possible to support AT91RM9200 and other ARM-based chips with some
27994 minor modifications.
27996 There's nothing fundamentally AVR32-specific in this driver, but it
27997 does use some features which are currently only defined for the
27999 * pm_get_clock_freq: Obtain the clock frequency of a given domain
28000 * gd->console_uart: A "struct device" containing information about
28001 register mappings, gpio resources and clocks associated with the
28004 For more information about these features, please see the "AT32AP
28007 commit 72a087e04705c26cad982879ebd06b5281bf825a
28008 Author: Wolfgang Denk <wd@pollux.denx.de>
28009 Date: Tue Oct 24 14:27:35 2006 +0200
28011 Add AT32AP CPU and AT32AP7000 SoC support
28012 Patch by Haavard Skinnemoen, 06 Sep 2006
28014 This patch adds support for the AT32AP CPU family and the AT32AP7000
28015 chip, which is the first chip implementing the AVR32 architecture.
28017 The AT32AP CPU core is a high-performance implementation featuring a
28018 7-stage pipeline, separate instruction- and data caches, and a MMU.
28019 For more information, please see the "AVR32 AP Technical Reference":
28021 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
28023 In addition to this, the AT32AP7000 chip comes with a large set of
28024 integrated peripherals, many of which are shared with the AT91 series
28025 of ARM-based microcontrollers from Atmel. Full data sheet is
28028 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
28030 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
28032 commit 7b64fef33c66be648826c0ff9758298ef13d0604
28033 Author: Wolfgang Denk <wd@pollux.denx.de>
28034 Date: Tue Oct 24 14:21:16 2006 +0200
28036 Add AVR32 architecture support
28037 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
28039 This patch adds common infrastructure code for the Atmel AVR32
28040 architecture. See doc/README.AVR32 for details.
28042 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
28044 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
28045 Author: Wolfgang Denk <wd@pollux.denx.de>
28046 Date: Tue Oct 24 13:57:33 2006 +0200
28048 Use -g instead of -gstabs in AFLAGS_DEBUG
28049 Patch by Haavard Skinnemoen, 30 Aug 2006
28051 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
28052 matter what the target's preferred debugging format is. This patch
28053 simply replaces -gstabs with -g, so that the default debugging format
28054 for the architecture is used.
28056 commit 965829872169c2996023840d98e1d85ad148d629
28057 Author: Wolfgang Denk <wd@pollux.denx.de>
28058 Date: Tue Oct 24 13:55:18 2006 +0200
28060 Fix/workaround broken dependency handling with make 3.81
28061 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
28063 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
28064 Author: Marian Balakowicz <m8@semihalf.com>
28065 Date: Mon Oct 23 22:17:05 2006 +0200
28067 Fix sequoia separate object direcory building problems.
28069 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
28070 Author: Jon Loeliger <jdl@freescale.com>
28071 Date: Fri Oct 20 17:16:35 2006 -0500
28073 Use generic I2C register block on 85xx and 86xx.
28075 Replace private IMMAP I2C structures with generic reg block
28076 and allow 86xx to have multiple I2C device busses.
28078 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28080 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
28081 Author: Jon Loeliger <jdl@freescale.com>
28082 Date: Fri Oct 20 15:54:34 2006 -0500
28084 Fix compilation warnings on a few 85xx boards.
28086 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28088 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
28089 Author: Jon Loeliger <jdl@freescale.com>
28090 Date: Fri Oct 20 15:50:15 2006 -0500
28092 Converted all 85xx boards to use a common FSL I2C driver.
28093 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
28094 And removed hard i2c path from a few u-boot.lds scipts too.
28095 Minor whitespace cleanups along the way.
28097 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28099 commit 4d45f69e362b05892c9e92a7907e5820995612aa
28100 Author: Jon Loeliger <jdl@freescale.com>
28101 Date: Thu Oct 19 12:02:24 2006 -0500
28103 Rewrite a series of goto statements as a sequences of
28104 conditional expressions instead.
28106 Use consistent return code 0/-1 for good/bad indicators.
28108 Include one fewer file if the driver isn't used at all.
28110 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28112 commit 7237c033b02fe295880435f1eb80819a0c987532
28113 Author: Jon Loeliger <jdl@freescale.com>
28114 Date: Thu Oct 19 11:02:16 2006 -0500
28116 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
28118 in an effort to begin to unify the umpteen FSL I2C drivers that
28119 are all otherwise very similar.
28121 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28123 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
28124 Author: Jon Loeliger <jdl@freescale.com>
28125 Date: Thu Oct 19 11:33:52 2006 -0500
28127 * Fix a bunch of compiler warnings for gcc 4.0
28129 Signed-off-by: Matthew McClintock <msm@freescale.com>
28131 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
28132 Author: Stefan Roese <sr@denx.de>
28133 Date: Tue Oct 17 06:14:31 2006 +0200
28135 Add monitor functions for indirect access to PPC440 DCR's
28136 Patch by Leonid Baryudin, 12 Oct 2006
28138 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
28139 Author: Jon Loeliger <jdl@freescale.com>
28140 Date: Fri Oct 13 16:47:53 2006 -0500
28142 Fixed leading whitespace issues.
28143 Removed spurious LAWAR thing.
28145 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28147 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
28148 Author: Jon Loeliger <jdl@freescale.com>
28149 Date: Thu Oct 12 10:42:36 2006 -0500
28151 Remove unneeded include files and local variable.
28153 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28155 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
28156 Author: Grant Likely <grant.likely@secretlab.ca>
28157 Date: Tue Oct 10 00:23:32 2006 -0600
28159 Fix possible uninitialized variable compiler warning.
28161 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
28162 do_bootm_linux() may be uninitialized. There is no possibility in the
28163 current code that len will get used uninitialized, but this fix follows
28164 the existing convention of setting both len and data to zero at the same
28167 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28169 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
28170 Author: Matthew McClintock <msm@freescale.com>
28171 Date: Wed Oct 11 15:13:01 2006 -0500
28173 * Fix a bunch of compiler warnings for gcc 4.0
28175 Signed-off-by: Matthew McClintock <msm@freescale.com>
28177 commit bf651baa365e5447246aad6a633ccd667cf24a39
28178 Author: Jon Loeliger <jdl@freescale.com>
28179 Date: Wed Oct 11 10:10:43 2006 -0500
28181 Move "ar" flags to config.mk to allow for silent "make -s"
28183 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
28184 Author: Jon Loeliger <jdl@freescale.com>
28185 Date: Tue Oct 10 17:19:03 2006 -0500
28187 Coding style changes to remove local varible blocks
28188 and reformat a bit nicer.
28190 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
28191 Author: Jon Loeliger <jdl@freescale.com>
28192 Date: Tue Oct 10 17:16:04 2006 -0500
28194 Fix whitespace issues.
28196 commit 7b382b7125f2397cce63253df62f183e3dfa2770
28197 Author: Jon Loeliger <jdl@freescale.com>
28198 Date: Tue Oct 10 17:14:45 2006 -0500
28200 Fix whitespace issues.
28202 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
28203 Author: Jon Loeliger <jdl@freescale.com>
28204 Date: Tue Oct 10 17:06:53 2006 -0500
28206 Fix whitespace issues.
28208 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
28209 Author: Jon Loeliger <jdl@freescale.com>
28210 Date: Tue Oct 10 17:03:43 2006 -0500
28212 Ran lindent and cleaned up whitespace issues.
28213 Format for 80-columns too.
28215 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
28216 Author: Jon Loeliger <jdl@freescale.com>
28217 Date: Tue Oct 10 17:02:22 2006 -0500
28219 Fix whitespace and 80-col issues.
28221 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
28222 Author: Stefan Roese <sr@denx.de>
28223 Date: Sat Oct 7 11:36:51 2006 +0200
28225 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
28226 Patch by Stefan Roese, 07 Oct 2006
28228 commit 5bc528fa4da751d472397b308137238a6465afd2
28229 Author: Stefan Roese <sr@denx.de>
28230 Date: Sat Oct 7 11:35:25 2006 +0200
28232 Update ALPR code (NAND support working now)
28233 Patch by Stefan Roese, 07 Oct 2006
28235 commit 77d5034847d328753b80c46b83f960a14a26f40e
28236 Author: Stefan Roese <sr@denx.de>
28237 Date: Sat Oct 7 11:33:03 2006 +0200
28239 Remove compile warnings in fpga code
28240 Patch by Stefan Roese, 07 Oct 2006
28242 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
28243 Author: Stefan Roese <sr@denx.de>
28244 Date: Sat Oct 7 11:30:52 2006 +0200
28246 Add CONFIG_BOARD_RESET to configure board specific reset function
28247 Patch by Stefan Roese, 07 Oct 2006
28249 commit f55df18187e7a45cb73fec4370d12135e6691ae1
28250 Author: John Traill <john.traill@freescale.com>
28251 Date: Fri Sep 29 08:23:12 2006 +0100
28253 Fix missing tCycle/modfreq calculation.
28255 Signed-off-by: John Traill <john.traill@freescale.com>
28257 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
28258 Author: Andy Fleming <afleming@freescale.com>
28259 Date: Wed Sep 13 10:33:35 2006 -0500
28261 Updated config headers to add default FDT-based booting
28263 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
28264 Author: Andy Fleming <afleming@freescale.com>
28265 Date: Wed Sep 13 10:34:18 2006 -0500
28267 Add support for eTSEC 3 & 4 on 8548 CDS
28269 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
28270 This will only work on rev 1.3 boards (but doesn't break older boards)
28271 * Cleaned up some comments to reflect the expanded role of tsec
28274 commit 084d648b109c8984f83674043c1a7fa3885ef801
28275 Author: Andy Fleming <afleming@freescale.com>
28276 Date: Wed Sep 13 10:33:56 2006 -0500
28278 Added code to support 2.6.18 PCI changes in u-boot
28280 * Added code to swizzle the IRQ map for the PCI
28282 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
28283 Author: Jon Loeliger <jdl@freescale.com>
28284 Date: Tue Sep 19 09:34:10 2006 -0500
28286 Modified makefile for new build mechanism.
28288 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28290 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
28291 Author: Jon Loeliger <jdl@freescale.com>
28292 Date: Thu Sep 14 08:40:36 2006 -0500
28294 Handle 86xx SVR values according to the new Reference Manual.
28295 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
28296 by the byte in bits 16-23 instead.
28297 Thanks to Jason Jin for noticing.
28299 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28301 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
28302 Author: Zhang Wei <wei.zhang@freescale.com>
28303 Date: Mon Aug 28 14:25:31 2006 +0800
28305 Fixed an OF-tree off-by-one bug when adding a new property name.
28306 This bug will cause the kernel booting to pause a long time.
28308 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
28309 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
28311 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
28312 Author: Jon Loeliger <jdl@freescale.com>
28313 Date: Tue Aug 29 11:05:09 2006 -0500
28315 Remove trailing empty lines.
28317 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
28318 Author: Jon Loeliger <jdl@freescale.com>
28319 Date: Tue Aug 29 09:48:49 2006 -0500
28321 Remove bogus msync and use volatile asm.
28323 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
28324 Author: Jon Loeliger <jdl@freescale.com>
28325 Date: Tue Aug 29 08:17:14 2006 -0500
28327 Add myself as maintainer for MPC8641HPCN.
28329 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
28330 Author: Zhang Wei <wei.zhang@freescale.com>
28331 Date: Mon Aug 28 14:25:31 2006 +0800
28333 Fixed an OF-tree off-by-one bug when adding a new property name.
28334 This bug will cause the kernel booting to pause a long time.
28336 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
28338 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
28339 Author: Haiying Wang <haiying.wang@freescale.com>
28340 Date: Fri Aug 25 14:38:34 2006 -0400
28342 Change ramdiskaddr and dtbaddr
28343 Remove PEX fluff commands.
28345 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
28346 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28348 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
28349 Author: Matthew McClintock <msm@freescale.com>
28350 Date: Wed Aug 23 13:32:45 2006 -0500
28352 * Another small fix for booting with disable_of
28354 Signed-off-by: Matthew McClintock <msm@freescale.com>
28356 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
28357 Author: Jon Loeliger <jdl@freescale.com>
28358 Date: Wed Aug 23 11:04:43 2006 -0500
28360 Cleanup and lindent new AHCI driver.
28362 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
28363 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
28364 Date: Wed Aug 23 19:15:12 2006 +0800
28366 Add AHCI define and sata support for MPC8641HPCN board.
28368 Signed-off-by:Jason Jin<jason.jin@freescale.com>
28370 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
28371 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
28372 Date: Wed Aug 23 19:10:44 2006 +0800
28374 Add AHCI support to u-boot
28376 Add AHCI support in u-boot, enable the sata disk controllers which
28377 following the AHCI protocol.
28379 Signed-off-by:Jason Jin<jason.jin@freescale.com>
28381 commit d8ea2acf5f137cae99417df4f573d036ee384668
28382 Author: Zhang Wei <wei.zhang@freescale.com>
28383 Date: Wed Aug 23 17:54:32 2006 +0800
28385 Add dtb boot-up parameter to default boot commands.
28387 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
28389 commit b93775c2036b99baa390ea425c4771895bbc63c4
28390 Author: Jon Loeliger <jdl@freescale.com>
28391 Date: Tue Aug 22 18:26:08 2006 -0500
28393 Cleanup even more poorly introduced whitespace.
28395 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
28396 Author: Jon Loeliger <jdl@freescale.com>
28397 Date: Tue Aug 22 18:07:00 2006 -0500
28399 Cleanup more poorly introduced whitespace.
28401 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
28402 Author: Jon Loeliger <jdl@freescale.com>
28403 Date: Tue Aug 22 17:54:05 2006 -0500
28405 Cleanup poorly introduced whitespace.
28407 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
28408 Author: Jon Loeliger <jdl@freescale.com>
28409 Date: Tue Aug 22 12:25:27 2006 -0500
28411 General indent and whitespace cleanups.
28413 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
28414 Author: Jon Loeliger <jdl@freescale.com>
28415 Date: Tue Aug 22 12:06:18 2006 -0500
28417 General indent and whitespace cleanups.
28419 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
28420 Author: Jon Loeliger <jdl@freescale.com>
28421 Date: Tue Aug 22 10:42:21 2006 -0500
28423 Cleanup compiler warnings.
28425 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
28426 Author: Matthew McClintock <msm@freescale.com>
28427 Date: Tue Aug 22 09:31:59 2006 -0500
28429 Fix disable_of booting
28431 Signed-off-by: Matthew McClintock <msm@freescale.com>
28433 commit 87a449c8ac396420cb24260f717ea9e6faa82047
28434 Author: Matthew McClintock <msm@freescale.com>
28435 Date: Tue Aug 22 09:23:55 2006 -0500
28437 Support for FDT in uImage format, error when using FDT from flash
28439 Signed-off-by: Matthew McClintock <msm@freescale.com>
28441 commit 75c299c38369d01addd5e054b8a16217b70f4a86
28442 Author: Haiying Wang <haiying.wang@freescale.com>
28443 Date: Tue Aug 15 15:12:55 2006 -0400
28445 Unlock cache before kernel starts up for MPC86xx
28447 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
28448 Author: Haiying Wang <haiying.wang@freescale.com>
28449 Date: Tue Aug 15 15:13:15 2006 -0400
28451 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
28453 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
28454 Author: Haiying Wang <haiying.wang@freescale.com>
28455 Date: Tue Aug 15 15:12:55 2006 -0400
28457 Unlock cache before kernel starts up for MPC86xx
28459 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
28460 Author: Haiying Wang <haiying.wang@freescale.com>
28461 Date: Tue Aug 15 15:13:15 2006 -0400
28463 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
28465 commit 86c8e17f25e972a7e272950a0735fad84e082b88
28466 Author: Matthew McClintock <msm@freescale.com>
28467 Date: Wed Aug 16 13:59:47 2006 -0500
28469 * Fix disable_of booting
28471 Signed-off-by: Matthew McClintock <msm@freescale.com>
28473 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
28474 Author: Matthew McClintock <msm@freescale.com>
28475 Date: Wed Aug 16 10:54:09 2006 -0500
28477 * Support for FDT in uImage format, error when using FDT from flash
28479 Signed-off-by: Matthew McClintock <msm@freescale.com>
28481 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
28482 Author: Stefan Roese <sr@denx.de>
28483 Date: Tue Aug 15 14:22:35 2006 +0200
28485 Add initial support for the ALPR board from Prodrive
28486 NAND needs some additional testing
28487 Patch by Heiko Schocher, 15 Aug 2006
28489 commit f0ff4692ff3372dec55074a8eb444943ab095abb
28490 Author: Stefan Roese <sr@denx.de>
28491 Date: Tue Aug 15 14:15:51 2006 +0200
28493 Add FPGA Altera Cyclone 2 support
28494 Patch by Heiko Schocher, 15 Aug 2006
28496 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
28497 Author: Jon Loeliger <jdl@freescale.com>
28498 Date: Mon Aug 14 15:33:38 2006 -0500
28500 Fix BAT0 to actually be cacheable, non-guarded as documented.
28502 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28504 commit 40bc83559db5745681909fd7382ae509567e116d
28505 Author: Jon Loeliger <jdl@freescale.com>
28506 Date: Wed Aug 9 15:32:16 2006 -0500
28508 Removed MPC8641HPCN DTS source file from build.
28509 It is no longer linked into U-Boot; its sources are
28510 now located in the kernel tree.
28512 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28514 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
28515 Author: Matthew McClintock <msm@freescale.com>
28516 Date: Wed Jun 28 10:47:03 2006 -0500
28518 * Switched default PCI speed for 8540 ADS back to 33MHz
28520 * Added comments and a printf to warn that PCI-X won't
28522 Patch by Andy Fleming 17-Mar-2006
28524 Signed-off-by: Andy Fleming <afleming@freescale.com>
28526 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
28527 Author: Matthew McClintock <msm@freescale.com>
28528 Date: Wed Jun 28 10:46:35 2006 -0500
28530 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
28532 Signed-off-by: Andy Fleming <afleming@freescale.com>
28534 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
28535 Author: Matthew McClintock <msm@freescale.com>
28536 Date: Wed Jun 28 10:46:13 2006 -0500
28538 * Added VIA configuration table
28540 * Added support for PCI2 on CDS
28541 Patch by Andy Fleming 17-Mar-2006
28543 Signed-off-by: Andy Fleming <afleming@freescale.com>
28545 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
28546 Author: Matthew McClintock <msm@freescale.com>
28547 Date: Wed Jun 28 10:45:41 2006 -0500
28549 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
28551 Signed-off-by: Andy Fleming <afleming@freescale.com>
28553 commit 97074ed9655309b64231bc2cee69fe85399f8055
28554 Author: Matthew McClintock <msm@freescale.com>
28555 Date: Wed Jun 28 10:45:17 2006 -0500
28557 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
28559 Signed-off-by: Andy Fleming <afleming@freescale.com>
28561 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
28562 Author: Matthew McClintock <msm@freescale.com>
28563 Date: Wed Jun 28 10:44:49 2006 -0500
28565 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
28567 Signed-off-by: Andy Fleming <afleming@freescale.com>
28569 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
28570 Author: Matthew McClintock <msm@freescale.com>
28571 Date: Wed Jun 28 10:44:23 2006 -0500
28573 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
28575 Signed-off-by: Andy Fleming <afleming@freescale.com>
28577 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
28578 Author: Matthew McClintock <msm@freescale.com>
28579 Date: Wed Jun 28 10:43:36 2006 -0500
28581 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
28583 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28585 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
28586 Author: Matthew McClintock <msm@freescale.com>
28587 Date: Wed Jun 28 10:43:00 2006 -0500
28589 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
28591 commit 5498d90312aad9f6bdbf047986027c35b03cd163
28592 Author: Matthew McClintock <msm@freescale.com>
28593 Date: Wed Jun 28 10:42:24 2006 -0500
28595 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
28597 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
28598 Author: Matthew McClintock <msm@freescale.com>
28599 Date: Wed Jun 28 10:41:37 2006 -0500
28601 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
28603 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
28604 Author: John Traill <john.traill@freescale.com>
28605 Date: Wed Aug 9 14:33:50 2006 +0100
28607 Add Rapidio support for the MPC8641HPCN
28609 Signed-off-by: John Traill <john.traill@freescale.com>
28611 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
28612 Author: John Traill <john.traill@freescale.com>
28613 Date: Tue Aug 8 11:32:43 2006 +0100
28615 Fix caslat calculation
28617 Signed-off-by: John Traill <john.traill@freescale.com>
28619 commit 709d3073e74153278e7904a70819bbef7df50e1a
28620 Author: Jon Loeliger <jdl@freescale.com>
28621 Date: Thu Aug 3 16:17:56 2006 -0500
28623 Convert to mac-address in ethernet nodes.
28625 commit 71748af833ca1017edf1415be376366ff2937d17
28626 Author: Haiying Wang <haiying.wang@freescale.com>
28627 Date: Fri Jul 28 12:41:35 2006 -0400
28629 Correct the irq value of DUART2
28631 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
28632 Author: Haiying Wang <haiying.wang@freescale.com>
28633 Date: Fri Jul 28 12:41:41 2006 -0400
28635 Change the space size of PEX IO in README
28637 commit 239db37c94f7a92941c4465feceb867c609241c5
28638 Author: Haiying Wang <haiying.wang@freescale.com>
28639 Date: Fri Jul 28 12:41:18 2006 -0400
28641 Move get_board_sys_clk to board directory
28643 commit 492900b985439fbce1a118afde1e35def870db03
28644 Author: John Traill <john.traill@freescale.com>
28645 Date: Fri Jul 28 09:03:54 2006 +0100
28647 Fix 8641HPCN pollution
28649 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
28650 Author: John Traill <john.traill@freescale.com>
28651 Date: Fri Jul 28 08:16:06 2006 +0100
28653 Fix 8641HPCN timebase
28655 commit c86360b830f1eecd7a72208575dde4f57879faea
28656 Author: Zhang Wei <wei.zhang@freescale.com>
28657 Date: Fri Jul 28 00:01:34 2006 +0800
28659 Fixed OF device tree of mpc86xxhpcn board.
28661 The changes works in with kernel irq mapping rework.
28663 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
28665 commit bea3f28d285942bf3f7ab339ce85178ded544225
28666 Author: Haiying Wang <haiying.wang@freescale.com>
28667 Date: Wed Jul 12 10:48:05 2006 -0400
28669 Add support for reading and writing mac addresses to or from ID EEPROM.
28671 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
28672 With attached patch, we can use command "mac/mac read/mac save/"
28673 to read and write EEPROM under u-boot prompt.
28675 U-boot will calculate the checksum of EEPROM while bootup,
28676 if it is right, then u-boot will check whether the mac address
28677 of eTSEC0/1/2/3 is availalbe (non-zero).
28679 If there is mac address availabe in EEPROM, u-boot will use it,
28680 otherewise, u-boot will use the mac address defined in
28681 MPC8641HPCN.h. This matches the requirement to set unique mac address
28682 for each TSEC port.
28684 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
28685 Signed-off-by: York Sun <yorksun@freescale.com>
28687 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
28688 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
28689 Date: Thu Jul 13 10:35:10 2006 -0500
28691 Fixed initrd issue by define big RAM
28693 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
28695 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
28696 Author: Jason Jin <Jason.jin@freescale.com>
28697 Date: Fri Jul 7 10:01:45 2006 -0500
28699 We made a u-boot patch to fix the hang up issue
28700 when booting filesystem from ramdisk.
28702 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
28704 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
28705 Author: Matthew McClintock <msm@freescale.com>
28706 Date: Wed Jun 28 10:47:03 2006 -0500
28708 * Switched default PCI speed for 8540 ADS back to 33MHz
28709 * Added comments and a printf to warn that PCI-X won't
28711 Patch by Andy Fleming 17-Mar-2006
28713 Signed-off-by: Andy Fleming <afleming@freescale.com>
28715 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
28716 Author: Matthew McClintock <msm@freescale.com>
28717 Date: Wed Jun 28 10:46:35 2006 -0500
28719 * Fixed a bug where 8555 PCI code used the old variable and
28721 Patch by Andy Fleming 17-Mar-2006
28723 Signed-off-by: Andy Fleming <afleming@freescale.com>
28725 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
28726 Author: Matthew McClintock <msm@freescale.com>
28727 Date: Wed Jun 28 10:46:13 2006 -0500
28729 * Added VIA configuration table
28730 * Added support for PCI2 on CDS
28731 Patch by Andy Fleming 17-Mar-2006
28733 Signed-off-by: Andy Fleming <afleming@freescale.com>
28735 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
28736 Author: Matthew McClintock <msm@freescale.com>
28737 Date: Wed Jun 28 10:45:41 2006 -0500
28739 * Fixed PCI memory definitions
28740 Patch by Andy Fleming 17-Mar-2006
28742 Signed-off-by: Andy Fleming <afleming@freescale.com>
28744 commit 087454609e47295443af793a282cddcd91a5f49c
28745 Author: Matthew McClintock <msm@freescale.com>
28746 Date: Wed Jun 28 10:45:17 2006 -0500
28748 * Added support for initializing second PCI bus on 85xx
28749 Patch by Andy Fleming 17-Mar-2006
28751 Signed-off-by: Andy Fleming <afleming@freescale.com>
28753 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
28754 Author: Matthew McClintock <msm@freescale.com>
28755 Date: Wed Jun 28 10:44:49 2006 -0500
28757 * Added PCI-X #defines for PCI-X initialization
28758 Patch by Andy Fleming on 17-Mar-2006
28760 Signed-off-by: Andy Fleming <afleming@freescale.com>
28762 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
28763 Author: Matthew McClintock <msm@freescale.com>
28764 Date: Wed Jun 28 10:44:23 2006 -0500
28766 * Made sure the code which disables prefetch for PCI devices
28767 sets the size of the prefetch region to 0
28768 Patch by Andy Fleming on 17-Mar-2006
28770 Signed-off-by: Andy Fleming <afleming@freescale.com>
28772 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
28773 Author: Matthew McClintock <msm@freescale.com>
28774 Date: Wed Jun 28 10:43:36 2006 -0500
28776 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
28777 Patch by Jon Loeliger 17-Jan-2006
28779 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28781 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
28782 Author: Matthew McClintock <msm@freescale.com>
28783 Date: Wed Jun 28 10:43:00 2006 -0500
28785 * Removed the oftree.dts for stxxtx in light of the changes
28786 to the flat device tree handling code
28787 Patch by Matthew McClintock 26-June-2006
28789 commit 1b380ec225665e73959677f3893dc658c5925e05
28790 Author: Matthew McClintock <msm@freescale.com>
28791 Date: Wed Jun 28 10:42:24 2006 -0500
28793 * Patch to modify ft_build.c to update flat device trees in place
28794 Patch by Matthew McClintock 26-June-2006
28796 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
28797 Author: Matthew McClintock <msm@freescale.com>
28798 Date: Wed Jun 28 10:41:37 2006 -0500
28800 * Modify bootm command to support booting with flat device trees
28801 Patch by Matthew McClintock 26-June-2006
28803 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
28804 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
28805 Date: Wed Jun 28 08:43:56 2006 -0500
28807 Change Id to symbolic name for RTL8139
28809 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28811 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
28812 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
28813 Date: Tue Jun 27 18:12:10 2006 +0800
28815 Fix RTL8139 in big endian
28817 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
28818 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
28820 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
28821 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
28822 Date: Tue Jun 27 18:12:23 2006 +0800
28824 Fix Tsec bug when no link
28826 When tftp a non-exist file from the tftp server, u-boot will check
28827 the link of all eth port. The original file will return wrong link
28828 state on the no link ports.
28830 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
28832 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
28833 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
28834 Date: Tue Jun 27 18:12:02 2006 +0800
28836 Fix bug for io_bar size during pci scan
28838 During the pci scan process, Some devices return bar_reponse with the
28839 highest bytes 0, such as the pci bridge in uli1575 return bar_response
28840 with 0xffffff, So the bar_size should be manually set under 64K.
28842 Signed-off-by: Jason Jin <jason.jin@freescale.com>
28844 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
28845 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
28846 Date: Tue Jun 27 18:11:54 2006 +0800
28848 Enable PCIE1 for MPC8641HPCN board
28850 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28852 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
28853 Author: Wolfgang Denk <wd@pollux.denx.de>
28854 Date: Mon Jun 26 11:06:00 2006 +0200
28858 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
28859 Author: Jon Loeliger <jdl@freescale.com>
28860 Date: Thu Jun 22 08:51:46 2006 -0500
28862 Fix bug in 8641hpcn reset command with no args.
28864 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
28865 Acked-by: Jon Loeliger <jdl@freescale.com>
28867 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
28868 Author: Zhang Wei <wei.zhang@freescale.com>
28869 Date: Tue Jun 20 17:47:15 2006 +0800
28871 Reworked IRQ mapping in OF-tree.
28873 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
28874 Author: Jon Loeliger <jdl@freescale.com>
28875 Date: Thu Jun 15 21:33:37 2006 -0500
28877 Do not enable address translation on secondary CPUs.
28878 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
28880 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28882 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
28883 Author: Wolfgang Denk <wd@pollux.denx.de>
28884 Date: Wed Jun 14 18:14:56 2006 +0200
28888 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
28889 Author: Wolfgang Denk <wd@pollux.denx.de>
28890 Date: Wed Jun 14 17:45:53 2006 +0200
28892 Various USB related patches
28893 - Add support for mpc8xx USB device.
28894 - Add support for Common Device Class - Abstract Control Model USB console.
28895 - Add support for flow control in USB slave devices.
28896 - Add support for switching between gserial and cdc_acm using environment.
28897 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
28898 - Update usbcore slightly to ease host enumeration.
28899 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
28900 - Add AdderUSB_config as a defconfig to enable usage of the USB console
28901 by default with the Adder87x U-Boot port.
28902 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
28904 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
28905 Author: Jon Loeliger <jdl@jdl.com>
28906 Date: Wed Jun 7 10:53:55 2006 -0500
28908 Fix a get_board_sys_clk() use-before-def warning.
28910 Signed-off-by: Jon Loeliger <jdl@jdl.com>
28912 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
28913 Author: Jon Loeliger <jdl@jdl.com>
28914 Date: Wed Jun 7 10:52:49 2006 -0500
28916 Allow DTC path to be passed in.
28918 Signed-off-by: Jon Loeliger <jdl@jdl.com>
28920 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
28921 Author: Haiying Wang <haiying.wang@freescale.com>
28922 Date: Tue Jun 6 16:54:29 2006 -0400
28924 Modify the IRQ of DUART2
28926 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
28927 Author: Jon Loeliger <jdl@jdl.com>
28928 Date: Wed May 31 13:55:35 2006 -0500
28932 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28934 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
28935 Author: Jon Loeliger <jdl@jdl.com>
28936 Date: Wed May 31 12:44:44 2006 -0500
28938 White space cleanup.
28939 Some 80-column cleanups.
28940 Convert printf() to puts() where possible.
28941 Use #include "spd_sdram.h" as needed.
28942 Enhanced reset command usage message a bit.
28944 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28946 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
28947 Author: Jon Loeliger <jdl@jdl.com>
28948 Date: Wed May 31 11:39:34 2006 -0500
28950 Removed unneeded local_bus_init() from 8641HPCN board.
28952 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28954 commit 4d3d729c16c392d2982d3266b659d333c927697d
28955 Author: Jon Loeliger <jdl@jdl.com>
28956 Date: Wed May 31 11:24:28 2006 -0500
28958 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
28960 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28962 commit b2a941de060350ad15878d8219825f4950e9bb8e
28963 Author: Jon Loeliger <jdl@jdl.com>
28964 Date: Wed May 31 10:07:28 2006 -0500
28966 Remove dead debug code.
28968 Signed-off-by: Jon Loeliger <jdl@jdl.com>
28970 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
28971 Author: Jon Loeliger <jdl@freescale.com>
28972 Date: Tue May 30 17:47:00 2006 -0500
28974 Move mpc86xx PIXIS code to board directory
28976 First cut at moving the PIXIS platform code out of
28977 the 86xx cpu directory and into board/mpc8641hpcn
28980 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28982 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
28983 Author: Markus Klotzbuecher <mk@denx.de>
28984 Date: Tue May 30 16:56:14 2006 +0200
28986 Support generic OHCI support for the s3c24x0 cpu.
28988 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
28989 Author: Haiying Wang <Haiying.Wang@freescale.com>
28990 Date: Tue May 30 09:10:32 2006 -0500
28992 Improve "reset" command's interaction with watchdog.
28994 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
28995 "reset altbank wd" will reset another bank WITH watch dog enabled
28996 "diswd" will disable watch dog after u-boot boots up successfully
28998 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
29000 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
29001 Author: Haiying Wang <Haiying.Wang@freescale.com>
29002 Date: Tue May 30 08:51:19 2006 -0500
29004 Fix two SDRAM setup bugs.
29007 Enable 1T/2T based on number of DIMMs present.
29009 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
29011 commit d11fec5015334deb2010e36ce00bb118cc5429a5
29012 Author: Haiying Wang <Haiying.Wang@freescale.com>
29013 Date: Fri May 26 10:24:48 2006 -0500
29015 Add first draft of the MPC8641HPCN doc/README.
29017 Signed-off-by: Jon Loeliger <jdl@jdl.com>
29019 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
29020 Author: Haiying Wang <Haiying.Wang@freescale.com>
29021 Date: Fri May 26 10:13:04 2006 -0500
29023 Added pci@8000 block.
29024 Updated ethernet interrupt mappings (moved up 48).
29025 Cleaned up a few comments.
29027 Signed-off-by: Jon Loeliger <jdl@jdl.com>
29029 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
29030 Author: Haiying Wang <Haiying.Wang@freescale.com>
29031 Date: Fri May 26 10:01:16 2006 -0500
29033 Allow args on reset command.
29035 Signed-off-by: Jon Loeliger <jdl@jdl.com>
29037 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
29038 Author: Markus Klotzbuecher <mk@denx.de>
29039 Date: Tue May 23 13:38:35 2006 +0200
29041 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
29042 fixes to the latter.
29044 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
29045 Author: Markus Klotzbuecher <mk@denx.de>
29046 Date: Tue May 23 10:33:11 2006 +0200
29048 More cleanup for the delta board and the generic usb_ohci driver. Added
29049 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
29050 initialization and cleanup hooks respectively.
29052 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
29053 Author: Markus Klotzbuecher <mk@denx.de>
29054 Date: Mon May 22 16:33:54 2006 +0200
29056 This patch adds USB storage support for the delta board. This is the first
29057 board to make use of a generic OHCI driver, that calls hooks for board
29058 dependant initialization.
29060 commit 14e37081ff3cac7ebe6e93836523429853b6b292
29061 Author: Jon Loeliger <jdl@jdl.com>
29062 Date: Fri May 19 13:28:39 2006 -0500
29064 Change arbitration to round-robin for SMP linux.
29066 commit 9a655876e5995be80f49054e2509500e871e4d3a
29067 Author: Jon Loeliger <jdl@jdl.com>
29068 Date: Fri May 19 13:26:34 2006 -0500
29070 Enable dual DDR controllers and interleaving.
29072 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
29073 Author: Jon Loeliger <jdl@jdl.com>
29074 Date: Fri May 19 13:22:44 2006 -0500
29076 Update 86xx address map and LAWBARs.
29078 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
29079 Author: Jon Loeliger <jdl@jdl.com>
29080 Date: Fri May 19 13:14:15 2006 -0500
29082 Remove L2 Cache invalidate polling.
29084 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
29085 Author: Jon Loeliger <jdl@jdl.com>
29086 Date: Fri May 19 12:33:09 2006 -0500
29088 Enable 2nd CPU and I2C.
29090 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
29091 Author: Jon Loeliger <jdl@freescale.com>
29092 Date: Mon May 15 07:26:56 2006 -0500
29094 Update interrupt mapping.
29096 commit 6cfea33477b04b63ed47386ed1629529484c33ba
29097 Author: Haiying Wang <Haiying.Wang@freescale.com>
29098 Date: Wed May 10 09:38:06 2006 -0500
29100 Remove unneeded INIT_RAM_LOCK cache twiddling.
29101 Correctly tracks r29 as global data pointer now.
29103 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
29105 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
29106 Author: Jon Loeliger <jdl@freescale.com>
29107 Date: Wed May 10 09:33:07 2006 -0500
29109 Remove unnecessary flash.c file.
29111 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
29112 Author: Jon Loeliger <jdl@freescale.com>
29113 Date: Tue May 9 08:23:49 2006 -0500
29115 Get MPC8641HPCN flash images working.
29117 Enable the CFI driver.
29118 Remove bogus LAWBAR7 cruft.
29119 Use correct TEXT_BASE, Fixup load script.
29120 Enable SPD EEPROM during DDR setup.
29121 Use generic RFC 1918 IP addresses by default.
29123 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
29124 Author: Jon Loeliger <jdl@freescale.com>
29125 Date: Thu Apr 27 10:15:16 2006 -0500
29127 Cleanup whitespaces and style issues.
29128 Removed //-style comments.
29129 Use 80-column lines.
29130 Remove trailing whitespace.
29131 Remove dead code and debug cruft.
29133 commit a2320a6bf8113a09544c42d160d10ac69d049a03
29134 Author: Jon Loeliger <jdl@freescale.com>
29135 Date: Thu Apr 27 08:22:39 2006 -0500
29137 Revert bad PCI prefetch limit change.
29139 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
29140 Author: Jon Loeliger <jdl@freescale.com>
29141 Date: Wed Apr 26 17:58:56 2006 -0500
29143 Initial support for MPC8641 HPCN board.