1 commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
2 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
3 Date: Wed May 21 13:58:41 2008 -0400
5 ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
7 This patch adds support for the Lyrtech SFF-SDR board,
8 based on the TI DaVinci architecture (ARM926EJS).
10 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
11 Signed-off-by: Philip Balister <philip@balister.org>
12 Signed-off-by: Wolfgang Denk <wd@denx.de>
14 commit 341188b9ccaa8d4462d772cc067aca8d7618633a
15 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16 Date: Thu May 22 11:09:59 2008 +0200
18 MMC: Consolidate MMC/SD command definitions
20 This moves the MMC and SD Card command definitions from
21 include/asm/arch/mmc.h into include/mmc.h. These definitions are
22 given by the MMC and SD Card standards, not by any particular
25 There's a lot more room for consolidation in the MMC drivers which
26 I'm hoping to get done eventually, but this patch is a start.
28 Compile-tested for all avr32 boards as well as lpc2292sodimm and
29 lubbock. This should cover all three mmc drivers in the tree.
31 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
33 commit fa60edfc4c952626e048c0e065f654b3c1822fa5
34 Author: Kyungmin Park <kmpark@infradead.org>
35 Date: Wed May 21 14:38:08 2008 +0900
37 Use better Ethernet timings for apollon board
39 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
41 commit 41c5eaa7253ed82bbae1eda5667755872c615164
42 Author: Andy Fleming <afleming@freescale.com>
43 Date: Mon Jun 16 13:58:56 2008 -0500
45 Resize device tree to allow space for board changes and the chosen node
47 Current code requires that a compiled device tree have space added to the end to
48 leave room for extra nodes added by board code (and the chosen node). This
49 requires that device tree creators anticipate how much space U-Boot will add to
50 the tree, which is absurd. Ideally, the code would resize and/or relocate the
51 tree when it needed more space, but this would require a systemic change to the
52 fdt code, which is non-trivial. Instead, we resize the tree inside
53 boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
54 where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
56 Signed-off-by: Andy Fleming <afleming@freescale.com>
58 commit 7570a9941fc565922078679a72d246fe208d696d
59 Author: Andy Fleming <afleming@freescale.com>
60 Date: Mon Jun 16 13:58:55 2008 -0500
62 Fix an underflow bug in __lmb_alloc_base
64 __lmb_alloc_base can underflow if it fails to find free space. This was fixed
65 in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
66 merely updates __lmb_alloc_base to resemble the current version in Linux.
68 Signed-off-by: Andy Fleming <afleming@freescale.com>
70 commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
71 Author: Andy Fleming <afleming@freescale.com>
72 Date: Mon Jun 16 13:58:54 2008 -0500
76 lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
77 lmb_reserve to temporarily reserve some memory.
79 Signed-off-by: Andy Fleming <afleming@freescale.com>
81 commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
82 Author: Andy Fleming <afleming@freescale.com>
83 Date: Mon Jun 16 13:58:53 2008 -0500
87 ALIGN() returns the smallest aligned value greater than the passed
88 in address or size. Taken from Linux.
90 Signed-off-by: Andy Fleming <afleming@freescale.com>
92 commit 28eab0d77352b84885f938759bf2612b7bf0bc44
93 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
94 Date: Mon May 19 12:26:38 2008 +0200
96 Conditionally add -fno-stack-protector to CFLAGS
98 When compile-testing on powerpc, I get errors like this:
100 net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
102 This seems to be because -fstack-protector is on by default, so
103 let's explicitly disable it on all architectures that support the
106 The Ubuntu toolchain is affected by this problem, and according to
107 Mike Frysinger, Gentoo has been running with SSP enabled for years.
108 More and more distros are turning SSP on by default, so this problem
109 is likely to get worse in the future.
111 Also, powerpc just happens to be one of the arches I do
112 compile-testing on. There may be other arches affected by this too.
114 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
116 commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
117 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
118 Date: Sun May 18 19:09:52 2008 +0200
120 pcmcia/ti_pci1410a: Move compile condition to the Makefile
122 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
124 commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
125 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
126 Date: Sun May 18 19:09:51 2008 +0200
128 pxa_pcmcia: Move compile condition to the Makefile
130 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
132 commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
133 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
134 Date: Sun May 18 19:09:50 2008 +0200
136 marabun_pcmcia: Move compile condition to the Makefile
138 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
140 commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
141 Author: Wolfgang Grandegger <wg@grandegger.com>
142 Date: Thu Jun 5 13:02:30 2008 +0200
144 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
146 This patch is based on the following patch sent a few minutes ago:
147 "NAND FSL UPM: driver re-write using the hwcontrol callback"
148 It is untested, of course. Anton, could you please give it a try.
150 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
151 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
153 commit 96026d42fa4e646d28318c0a1438aac4b2017909
154 Author: Anatolij Gustschin <agust@denx.de>
155 Date: Thu Jun 12 12:40:11 2008 +0200
159 Building for 4xx doesn't work since commit 4dbdb768:
161 In file included from 4xx_pcie.c:28:
162 include/asm/processor.h:971: error: expected ')' before 'ver'
163 make[1]: *** [4xx_pcie.o] Error 1
165 This patch fixes the problem.
167 Signed-off-by: Anatolij Gustschin <agust@denx.de>
168 Acked-by: Stefan Roese <sr@denx.de>
169 Acked-by: Kumar Gala <galak@kernel.crashing.org>
171 commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
172 Author: Stefan Roese <sr@denx.de>
173 Date: Mon Jun 16 10:40:02 2008 +0200
175 cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
177 This patch simplifies flash_toggle() (AMD commandset), which is used to
178 detect if a FLASH device is still busy with erase/program operations. On
179 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
180 did not detect the busy state reliably, resulting in non erased sectors
181 etc. This patch now simplifies this function by "just" comparing the
182 complete data-word instead of ANDing it with the command-word (0x40)
183 before the compatison. It is done the same way in the Linux implementation
184 chip_ready() in cfi_cmdset_0002.c.
186 Signed-off-by: Stefan Roese <sr@denx.de>
188 commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
189 Author: Philip Balister <philip@balister.org>
190 Date: Mon Jun 16 08:58:07 2008 -0400
192 NAND: Add missing declaration to non-redundant saveenv().
194 Signed-off-by: Scott Wood <scottwood@freescale.com>
196 commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
197 Author: Wolfgang Grandegger <wg@grandegger.com>
198 Date: Mon Jun 2 15:09:55 2008 +0200
200 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
202 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
203 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
204 Signed-off-by: Scott Wood <scottwood@freescale.com>
206 commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
207 Author: Stefan Roese <sr@denx.de>
208 Date: Tue Jun 10 15:34:11 2008 +0200
210 ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
212 This patch disables the square wave output of the M41T62 RTC used on
213 Canyonlands & Glacier. Here the explanation:
215 The serial real-time clock part used in the design is an
216 STMicro M41T62. This part has a full-time 32KHz square wave
217 output that is connected to the TmrClk input to the
218 processor. The default state for this square wave output is
219 enabled so the output runs continuously when the board is
220 powered normally and also from the battery. The TmrClk input
221 to the processor goes to ground when the power is removed
222 from the board/processor, and therefore the running square
223 wave output is driving ground which drains the battery quickly.
225 Signed-off-by: Stefan Roese <sr@denx.de>
227 commit a94f22f08f280905926219e568568964cb9eeb9d
228 Author: Andy Fleming <afleming@freescale.com>
229 Date: Wed Jun 11 18:10:20 2008 -0500
231 Fix build issue with string.h and linux/string.h
234 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
235 Author: Wolfgang Denk <wd@denx.de>
236 Date: Fri Jun 6 14:28:14 2008 +0200
238 tools/mkimage: fix compiler warnings on some systems.
240 Broke building on some systems, because the host's string.h was interfering
241 with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
242 we're building for the host, so now we only include when building inside
245 Signed-off-by: Andy Fleming <afleming@freescale.com>
247 commit 9973e3c614721bbf169882ffc3be266a6611cd60
248 Author: Becky Bruce <becky.bruce@freescale.com>
249 Date: Mon Jun 9 16:03:40 2008 -0500
251 Change initdram() return type to phys_size_t
253 This patch changes the return type of initdram() from long int to phys_size_t.
254 This is required for a couple of reasons: long int limits the amount of dram
255 to 2GB, and u-boot in general is moving over to phys_size_t to represent the
256 size of physical memory. phys_size_t is defined as an unsigned long on almost
257 all current platforms.
259 This patch *only* changes the return type of the initdram function (in
260 include/common.h, as well as in each board's implementation of initdram). It
261 does not actually modify the code inside the function on any of the platforms;
262 platforms which wish to support more than 2GB of DRAM will need to modify
263 their initdram() function code.
265 Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
268 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
270 commit 391fd93ab23e15ab3dd58a54f5b609024009c378
271 Author: Becky Bruce <becky.bruce@freescale.com>
272 Date: Mon Jun 9 20:37:18 2008 -0500
274 Change lmb to use phys_size_t/phys_addr_t
276 This updates the lmb code to use phys_size_t
277 and phys_addr_t instead of unsigned long. Other code
278 which interacts with this code, like getenv_bootm_size()
281 Booted on MPC8641HPCN, build-tested ppc, arm, mips.
283 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
285 commit 61b09fc2952dc636017df4e7970e3de132276ba1
286 Author: Becky Bruce <becky.bruce@freescale.com>
287 Date: Mon Jun 9 20:37:17 2008 -0500
289 Change print_size to take phys_size_t
291 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
293 commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
294 Author: Becky Bruce <becky.bruce@freescale.com>
295 Date: Mon Jun 9 20:37:16 2008 -0500
297 Change bd/gd memsize/ram_size to be phys_size_t.
299 Currently, both are defined as an unsigned long, but
300 should be phys_size_t. This should result in no real change,
301 since phys_size_t is currently an unsigned long for all the
302 default configs. Also add print_lnum to cmd_bdinfo to deal
303 with the potentially wider memsize.
305 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
307 commit ba04f7010958e88a8910f2a123fee53fdc72e013
308 Author: Kumar Gala <galak@kernel.crashing.org>
309 Date: Tue Jun 10 16:16:02 2008 -0500
311 FSL LAW: Add new interface to use the last free LAW
313 LAWs have the concept of priority so its useful to be able to allocate
314 the lowest (highest number) priority. We will end up using this with the
317 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
319 commit 859a86a25c569d3665ff413d1d923394b8a961f3
320 Author: Kumar Gala <galak@kernel.crashing.org>
321 Date: Wed Jun 11 00:51:45 2008 -0500
323 85xx/86xx: Move to dynamic mgmt of LAWs
325 With the new LAW interface (set_next_law) we can move to letting the
326 system allocate which LAWs are used for what purpose. This makes life
327 a bit easier going forward with the new DDR code.
329 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
330 Signed-off-by: Andy Fleming <afleming@freescale.com>
331 Acked-by: Jon Loeliger <jdl@freescale.com>
332 Acked-by: Becky Bruce <becky.bruce@freescale.com>
334 commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
335 Author: Kumar Gala <galak@kernel.crashing.org>
336 Date: Wed Jun 11 00:44:10 2008 -0500
338 FSL LAW: Keep track of LAW allocations
340 Make it so we keep track of which LAWs have allocated and provide
341 a function (set_next_law) which can allocate a LAW for us if one is
344 In the future we will move to doing more "dynamic" LAW allocation
345 since the majority of users dont really care about what LAW number
348 Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
350 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
351 Signed-off-by: Andy Fleming <afleming@freescale.com>
353 commit ddde74a159caa6e18b481fec01d40b885aebb566
354 Author: Kumar Gala <galak@kernel.crashing.org>
355 Date: Mon Jun 9 22:31:57 2008 -0500
357 85xx: remove dummy board_early_init_f
359 A number of board ports have empty version of board_early_init_f
360 for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
362 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
364 commit 81e56e9af0d43712db8efb843606a8d62eab454f
365 Author: Kumar Gala <galak@kernel.crashing.org>
366 Date: Mon Jun 9 18:55:38 2008 -0500
368 MPC8544DS: Update config.h
370 * Enable flash progress
371 * remove CLEAR_LAW0 since we dont really use it
373 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
375 commit 978e81604c1b28526ed580df0fbe64eb8384e94f
376 Author: Kumar Gala <galak@kernel.crashing.org>
377 Date: Mon Jun 9 13:37:24 2008 -0500
379 85xx: Remove unused and unconfigured memory test code.
381 Remove unused and unconfigured DDR test code from FSL 85xx boards.
382 Besides, other common code exists.
384 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
386 commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
387 Author: Sergei Poselenov <sposelenov@emcraft.com>
388 Date: Fri Jun 6 15:42:45 2008 +0200
390 Socrates: Added FPGA base address update in FDT.
392 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
394 commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
395 Author: Sergei Poselenov <sposelenov@emcraft.com>
396 Date: Fri Jun 6 15:42:44 2008 +0200
398 Socrates: NAND support added. Changed the U-Boot base address and
400 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
402 commit 248ae5cfc8bf69074d1da099dc495d8e06070547
403 Author: Sergei Poselenov <sposelenov@emcraft.com>
404 Date: Fri Jun 6 15:42:43 2008 +0200
406 NAND: Added support for 128-bit OOB, adapted
408 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
410 commit 31ca0208612f2eb57690110d7c2815953650e47b
411 Author: Sergei Poselenov <sposelenov@emcraft.com>
412 Date: Fri Jun 6 15:42:42 2008 +0200
414 Socrates: added missed file with UPMA configuration data.
416 Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
418 commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
419 Author: Sergei Poselenov <sposelenov@emcraft.com>
420 Date: Fri Jun 6 15:42:41 2008 +0200
422 Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
424 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
426 commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
427 Author: Sergei Poselenov <sposelenov@emcraft.com>
428 Date: Fri Jun 6 15:42:40 2008 +0200
430 Added the upmconfig() function for 85xx.
432 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
433 Signed-off-by: Andy Fleming <afleming@freescale.com>
435 commit d39e68514ff943930ee692cff3fde03532eb7fec
436 Author: Sergei Poselenov <sposelenov@emcraft.com>
437 Date: Fri Jun 6 15:42:39 2008 +0200
439 Socrates: config file cleanup.
441 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
443 commit e8cc3f04b124f757af4528206e60d8eb715ae083
444 Author: Wolfgang Grandegger <wg@grandegger.com>
445 Date: Thu Jun 5 13:12:10 2008 +0200
447 TQM85xx: Change memory map to support Flash memory > 128 MiB
449 Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
450 memory. The current memory map only supports up to 128 MiB Flash.
451 This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
452 set, up to 1 GiB flash is supported. To achieve this, the memory
453 map has to be adjusted in great parts (for example the CCSRBAR is
454 moved from 0xE0000000 to 0xA0000000).
456 If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
457 memory map also has to be considered in the kernel (changed
458 CCSRBAR address, changed PCI IO base address, ...). Please use
459 an appropriate Flat Device Tree blob (tqm8548.dtb).
461 Signed-off-by: Martin Krause <martin.krause@tqs.de>
462 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
464 commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
465 Author: Wolfgang Grandegger <wg@grandegger.com>
466 Date: Thu Jun 5 13:12:09 2008 +0200
468 TQM85xx: NAND support via local bus UPMB
470 This patch adds support for NAND FLASH on the TQM8548. It is disabled by
471 default and can be enabled for the TQM8548 modules. It is now based on
472 the re-written FSL NAND UPM driver. A patch has been posted earlier today
475 "NAND FSL UPM: driver re-write using the hwcontrol callback"
477 Note that the R/B pin is not supported by that module requiring to use
478 the specified maximum delay time.
480 Note: With NAND support enabled the size of the U-Boot image exceeds
481 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
482 doubling the image size :-(.
484 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
485 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
487 commit b9e8078bb3f3c48111a7081e27279938c3a445e1
488 Author: Wolfgang Grandegger <wg@grandegger.com>
489 Date: Thu Jun 5 13:12:08 2008 +0200
491 TQM8548: PCI express support
493 This patch adds support for PCI express cards. The board support
494 now uses common FSL PCI init code, for both, PCI and PCIe on all
497 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
498 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
500 commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
501 Author: Wolfgang Grandegger <wg@grandegger.com>
502 Date: Thu Jun 5 13:12:07 2008 +0200
504 TQM8548: Basic support for the TQM8548 modules
506 This patch adds basic support for the TQM8548 module from TQ-Components
507 (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
510 Furthermore Flash buffer write has been enabled to speed up output to
511 the Flash by approx. a factor of 10.
513 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
514 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
516 commit 25991353204c78b094c3c1fec90182dcd607ab8f
517 Author: Wolfgang Grandegger <wg@grandegger.com>
518 Date: Thu Jun 5 13:12:06 2008 +0200
520 TQM85xx: Support for Flat Device Tree
522 This patch adds support for Linux kernels using the Flat Device Tree.
523 It also re-defines the default environment settings for booting Linux
526 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
528 commit d9ee843d54c54776e1fdb86336ce554906a87331
529 Author: Wolfgang Grandegger <wg@grandegger.com>
530 Date: Thu Jun 5 13:12:05 2008 +0200
532 TQM85xx: Support for Intel 82527 compatible CAN controller
534 This patch adds initialization of the UPMC RAM to support up to two
535 Intel 82527 compatible CAN controller on the TQM85xx modules.
537 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
538 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
540 commit 518d5cfe72916323c746af1647764459914f555f
541 Author: Wolfgang Grandegger <wg@grandegger.com>
542 Date: Thu Jun 5 13:12:04 2008 +0200
544 TQM85xx: Bugfix in the SDRAM initialisation
546 The CS0_BNDS register is now set according to the detected
549 Signed-off-by Martin Krause <martin.krause@tqs.de>
551 commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
552 Author: Wolfgang Grandegger <wg@grandegger.com>
553 Date: Thu Jun 5 13:12:03 2008 +0200
555 TQM85xx: Fix chip select configuration for second FLASH bank
557 This patch fixes the re-calculation of the automatic chip select
558 configuration for boards with two populated FLASH banks.
560 Signed-off-by: Martin Krause <martin.krause@tqs.de>
562 commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
563 Author: Wolfgang Grandegger <wg@grandegger.com>
564 Date: Thu Jun 5 13:12:02 2008 +0200
566 TQM85xx: Support for Spansion 'N' type flashes added
568 The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
569 than the formerly used 'M' types (S29GLxxxM series), so the flash layout
570 needs to be changed -> new start address of the environment. The macro
571 definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
572 defined for boards with 'N' type flashes.
574 Signed-off-by: Martin Krause <martin.krause@tqs.de>
575 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
577 commit 5d5bd838f76eade22c0ea40a500389f924d0da36
578 Author: Wolfgang Grandegger <wg@grandegger.com>
579 Date: Thu Jun 5 13:12:01 2008 +0200
581 TQM85xx: Fix CPM port pin configuration
583 Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
584 board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
585 as serial interface anyway. Worse, on some board variants configuring the
586 pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
588 Signed-off-by: Martin Krause <martin.krause@tqs.de>
590 commit b99ba1679e8cd51b023e67098c89e606e47137d2
591 Author: Wolfgang Grandegger <wg@grandegger.com>
592 Date: Thu Jun 5 13:12:00 2008 +0200
594 TQM85xx: Various coding style fixes
596 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
598 commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
599 Author: Gerald Van Baren <vanbaren@cideas.com>
600 Date: Tue Jun 10 22:15:58 2008 -0400
602 libfdt: Move the working_fdt pointer to cmd_fdt.c
604 The working_fdt pointer was declared in common/fdt_support.c but was
605 not used there. Move it to common/cmd_fdt.c where it is used (it is
606 also used in lib_ppc/bootm.c).
608 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
610 commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
611 Author: Kim Phillips <kim.phillips@freescale.com>
612 Date: Tue Jun 10 11:06:17 2008 -0500
614 fdt: unshadow global working fdt variable
616 differentiate with local variables of the same name by renaming the
617 global 'fdt' variable 'working_fdt'.
619 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
621 commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
622 Author: Andy Fleming <afleming@freescale.com>
623 Date: Tue Jun 10 18:49:34 2008 -0500
625 socrates: Fix PCI clk fix patch
627 The submitted patch seems to have been more up-to-date, but an older patch was
628 already in the repository. This patch encompasses the differences
630 Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
632 Signed-off-by: Andy Fleming <afleming@freescale.com>
634 commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
635 Author: Wolfgang Grandegger <wg@grandegger.com>
636 Date: Thu Jun 5 13:02:29 2008 +0200
638 NAND FSL UPM: driver re-write using the hwcontrol callback
640 This is a re-write of the NAND FSL UPM driver using the more universal
641 hwcontrol callback (instead of the cmdfunc callback). Here is a brief
642 list of furher modifications:
644 - For the time being, the UPM setup writing the UPM array has been
645 removed from the driver and must now be done by the board specific
648 - The bus width definition in "struct fsl_upm_nand" is now in bits to
649 comply with the corresponding Linux driver and 8, 16 and 32 bit
650 accesses are supported.
652 - chip->dev_read is only set if fun->dev_ready != NULL, which is
653 required for boards not connecting the R/B pin.
655 - A few issue have been fixed with MxMR bit manipulation like in the
656 corresponding Linux driver.
658 Note: I think the "io_addr" field of "struct fsl_upm" could be removed
659 as well, because the address is already determined by
660 "nand->IO_ADDR_[RW]", but I'm not 100% sure.
662 This patch has been tested on a TQM8548 modules with the NAND chip
663 Micron MT29F8G08FABWP.
665 This patch is based on the following patches posted to this list a few
668 PPC: add accessor macros to clear and set bits in one shot
669 83xx/85xx/86xx: add more MxMR local bus definitions
671 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
672 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
674 commit 6beecfbb542992eede5831240cd58678274683a9
675 Author: Wolfgang Grandegger <wg@grandegger.com>
676 Date: Thu Jun 5 13:11:59 2008 +0200
678 MPC85xx: Beautify boot output of L2 cache configuration
680 The boot output is now aligned poperly with other boot output
686 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
688 commit 398415114f0a705163a14543e9fef03f734b1ffa
689 Author: Wolfgang Grandegger <wg@grandegger.com>
690 Date: Wed Jun 4 12:45:22 2008 +0200
692 PPC: add accessor macros to clear and set bits in one shot
694 PPC: add accessor macros to clear and set bits in one shot
696 This patch adds macros from linux/include/asm-powerpc/io.h to clear and
697 set bits in one shot using the in_be32, out_be32, etc. accessor functions.
698 They are very handy to manipulate bits it I/O registers.
700 This patch is required for my forthcoming FSL NAND UPM driver re-write and
701 the support for the TQM8548 module.
703 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
705 commit 4677988c7edc070c3786d3db7994abeca3ab82a0
706 Author: Wolfgang Grandegger <wg@grandegger.com>
707 Date: Wed Jun 4 13:52:17 2008 +0200
709 TQM: move TQM boards to board/tqc
711 Move all TQM board directories to the vendor specific directory "tqc"
712 for modules from TQ-Components GmbH (http://www.tqc.de).
714 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
716 commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
717 Author: Wolfgang Grandegger <wg@grandegger.com>
718 Date: Mon Jun 2 12:09:30 2008 +0200
720 83xx/85xx/86xx: add more MxMR local bus definitions
722 83xx/85xx/86xx: add more MxMR local bus definitions
724 This patch adds more macro definitions for the UPM Machine Mode Registers
725 They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
726 common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
727 required for my forthcoming FSL NAND UPM driver re-write and the support
728 for the TQM8548 module.
730 This patch is based on the following two patches from Anton Vorontsov:
732 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
733 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
735 I leave coding style violation fixes, code beautification and name
736 corrections to somebody else ;-(.
738 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
740 commit c8c5fc266e4499e283c293ccb972863156aa4134
741 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
742 Date: Thu May 29 18:14:56 2008 +0400
744 83xx/85xx: further localbus cleanups
746 Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
747 from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
749 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
751 commit 42dbd667c88d496882d53e22656e89b654205492
752 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
753 Date: Wed May 28 18:20:15 2008 +0400
755 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
757 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
758 use it on MPC85xx and MPC86xx processors.
760 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
762 commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
763 Author: Kumar Gala <galak@kernel.crashing.org>
764 Date: Thu May 29 11:22:06 2008 -0500
766 85xx: Add setting of cache props in the device tree.
768 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
770 commit 4dbdb7681e243431530df0725627192a0c4aefda
771 Author: Kumar Gala <galak@kernel.crashing.org>
772 Date: Tue Jun 10 16:53:46 2008 -0500
774 85xx: expose cpu identification
776 The current cpu identification code is used just to return the name
777 of the processor at boot. There are some other locations that the name
778 is useful (device tree setup). Expose the functionality to other bits
781 Also, drop the 'E' suffix and add it on by looking at the SVR version
782 when we print this out. This is mainly to allow the most flexible use
783 of the name. The device tree code tends to not care about the 'E' suffix.
785 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
787 commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
788 Author: Kim Phillips <kim.phillips@freescale.com>
789 Date: Tue Jun 10 13:25:24 2008 -0500
791 mpc83xx: MVBLM7: minor build fixups
793 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
795 commit a1293e549b56da135ef32ffca5b9d35a16aa6802
796 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
797 Date: Tue Jun 10 09:14:05 2008 +0200
799 add MPC8343 based board mvBlueLYNX-M7 (board+make files)
801 Add MPC8343 based board mvBlueLYNX-M7.
802 It's a single board stereo camera system.
803 Please read doc/README.mvblm7 for details.
805 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
806 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
808 commit c005b93925ba49f07da2aa748527996d927e172f
809 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
810 Date: Tue Jun 10 09:13:16 2008 +0200
812 add MPC8343 based board mvBlueLYNX-M7 (doc+config)
814 Add MPC8343 based board mvBlueLYNX-M7.
815 It's a single board stereo camera system.
816 Please read doc/README.mvblm7 for details.
818 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
819 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
821 commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
822 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
823 Date: Thu May 29 18:14:56 2008 +0400
825 83xx/85xx: further localbus cleanups
827 move the BRx_* and ORx_* left behind in mpc85xx.h
829 The same is needed for mpc8xx.h and mpc8260.h (defines are almost
830 the same, just few differences which needs some attention though).
832 But the bad news for mpc8xx and mpc8260 is that there are a lot of users
833 of these defines. So this cleanup I'll leave for the "better times".
835 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
836 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
838 commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
839 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
840 Date: Wed May 28 18:20:15 2008 +0400
842 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
844 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
845 use it on MPC85xx and MPC86xx processors.
847 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
848 Acked-by: Andy Fleming <afleming@freescale.com>
849 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
851 commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
852 Author: Tor Krill <tor@excito.com>
853 Date: Mon Jun 2 15:09:30 2008 +0200
855 Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
857 Signed-off-by: Tor Krill <tor@excito.com>
858 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
860 commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
861 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
862 Date: Mon Jun 9 23:37:44 2008 +0900
864 net: Conditional COBJS inclusion of network drivers
866 Replace COBJS-y with appropriate driver config names.
868 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
869 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
871 commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
872 Author: Gerald Van Baren <vanbaren@cideas.com>
873 Date: Mon Jun 9 21:02:17 2008 -0400
875 Use strncmp() for the fdt command
877 Cleaner than doing multiple conditionals on characters.
879 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
881 commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
882 Author: Gerald Van Baren <vanbaren@cideas.com>
883 Date: Sat Jun 7 12:25:05 2008 -0400
885 The fdt boardsetup command criteria was not unique
887 It was checking just for "b", which is not unique with respect to the
888 "boot" command. Change to check for "boa"[rdsetup].
890 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
892 commit 2f08bfa9526bae4f461e043530cfb903fec0d273
893 Author: David Gibson <david@gibson.dropbear.id.au>
894 Date: Tue May 20 17:19:11 2008 +1000
896 libfdt: Several cleanups to parameter checking
898 This patch makes a couple of small cleanups to parameter checking of
901 - In several functions which take a node offset, we use an
902 idiom involving fdt_next_tag() first to check that we have indeed been
903 given a node offset. This patch adds a helper function
904 _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
906 - In fdt_rw.c in several places we have the expanded version
907 of the RW_CHECK_HEADER() macro for no particular reason. This patch
908 replaces those instances with an invocation of the macro; that's what
911 - In fdt_sw.c we rename the check_header_sw() function to
912 sw_check_header() to match the analgous function in fdt_rw.c, and we
913 provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
914 functions in fdt_rw.c
916 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
918 commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
919 Author: Gerald Van Baren <vanbaren@cideas.com>
920 Date: Tue Jun 3 20:34:45 2008 -0400
922 Remove the deprecated CONFIG_OF_FLAT_TREE
924 Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
925 cleaner, has better functionality, and is better supported.
927 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
929 commit 62bcdda293efa752f8281fbd9da03822b27ce82f
930 Author: Gerald Van Baren <vanbaren@cideas.com>
931 Date: Tue Jun 3 20:26:29 2008 -0400
933 Change the stxxst to CONFIG_OF_LIBFDT
935 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
938 WARNING: It appears that this board lost its ability to boot via a
939 flattened device tree prior to this changeset.
941 WARNING: This conversion was untested because I do not have a board to
944 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
946 commit 589c04271d129729a8b01391453851ab9cc4069c
947 Author: Gerald Van Baren <vanbaren@cideas.com>
948 Date: Tue Jun 3 20:24:58 2008 -0400
950 Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
952 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
955 WARNING: This conversion is untested because I do not have a board to
958 NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
959 /aliases/ethernet1 property for the ethernet to work.
961 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
963 commit ee1e35bede91debc8bff9b02f75574486033b652
964 Author: Kumar Gala <galak@kernel.crashing.org>
965 Date: Thu May 29 01:21:24 2008 -0500
967 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
969 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
971 commit 3b9519fc50802436e417c839e69df7b2016cade5
972 Author: Becky Bruce <becky.bruce@freescale.com>
973 Date: Wed May 14 13:10:04 2008 -0500
975 MPC85xx: Change traps.c to not reference non-addressable memory
977 Currently, END_OF_RAM is used by the trap code to determine if
978 we should attempt to access the stack pointer or not. However,
979 on systems with a lot of RAM, only a subset of the RAM is
980 guaranteed to be mapped in and accessible. Change END_OF_RAM
981 to use get_effective_memsize() instead of using the raw ram
984 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
986 commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
987 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
988 Date: Mon Jun 9 13:39:57 2008 +0900
990 sh: Renesas Solutions SH7763RDP board support
992 SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
993 In this patch, support SCIF, NOR Flash, and Ethernet.
995 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
996 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
998 commit 60179098a95eaa972007d7ec58e4c1588029720f
999 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
1000 Date: Fri Jun 6 16:24:13 2008 +0900
1002 sh: Add support Renesas SH7763
1004 Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
1005 This patch supprts CPU register's header file.
1007 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
1008 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1010 commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
1011 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
1012 Date: Fri Jun 6 16:16:08 2008 +0900
1014 sh: SH7763 SCIF support
1016 SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
1017 but only SCIF2 is different. This patch work all SCIF channel.
1019 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
1020 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
1022 commit 79b51ff8205f0354d5300570614c1d2db499679c
1023 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1024 Date: Sat Jun 7 20:51:59 2008 +0900
1026 [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
1028 Also get rid of some #ifdefs in *.c files.
1030 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1032 commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
1033 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1034 Date: Sat Jun 7 20:51:56 2008 +0900
1036 [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
1040 Common Alchemy Au1x00 stuff. All Alchemy processor based machines
1041 need to have this config as a system type specifier.
1043 CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
1044 CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
1046 Machine type specifiers. Each port should have one of aboves.
1048 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1050 commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
1051 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
1052 Date: Fri May 30 16:05:28 2008 -0400
1054 env_nand.c: Added bad block management for environment variables
1056 Modified to check for bad blocks and to skipping over them when
1057 CFG_ENV_RANGE has been defined.
1058 CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
1061 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
1062 Signed-off-by: Scott Wood <scottwood@freescale.com>
1064 commit 279726bd00558e80263d44581c44167625b7fb9a
1065 Author: Becky Bruce <becky.bruce@freescale.com>
1066 Date: Wed May 14 13:09:58 2008 -0500
1068 MPC86xx: Change traps.c to not reference non-addressable memory
1070 Currently, END_OF_RAM is used by the trap code to determine if
1071 we should attempt to access the stack pointer or not. However,
1072 on systems with a lot of RAM, only a subset of the RAM is
1073 guaranteed to be mapped in and accessible. Change END_OF_RAM
1074 to use get_effective_memsize() instead of using the raw ram
1075 size out of the bd to prevent us from trying to access
1078 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1080 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
1081 Author: Wolfgang Denk <wd@denx.de>
1082 Date: Fri Jun 6 14:28:14 2008 +0200
1084 tools/mkimage: fix compiler warnings on some systems.
1086 Signed-off-by: Wolfgang Denk <wd@denx.de>
1088 commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
1089 Author: Stefan Roese <sr@denx.de>
1090 Date: Fri Jun 6 16:10:41 2008 +0200
1092 ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
1094 We use upper case letters for the AMCC processor defines (like
1095 CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
1096 not CONFIG_440SPe. This patch fixes the last misspelled config options.
1098 Signed-off-by: Stefan Roese <sr@denx.de>
1100 commit 72675dc6c06a48846d180106161d49dd714383cc
1101 Author: Stefan Roese <sr@denx.de>
1102 Date: Fri Jun 6 15:55:21 2008 +0200
1104 ppc4xx: Unify AMCC's board config files (part 3/3)
1106 This patch series unifies the AMCC eval board ports by introducing
1107 a common include header for all AMCC eval boards:
1109 include/configs/amcc-common.h
1111 This header now includes all common configuration options/defines which
1112 are removed from the board specific headers.
1114 The reason for this is ease of maintenance and unified look and feel
1117 Signed-off-by: Stefan Roese <sr@denx.de>
1119 commit 490f204096d6e2c9940f67816f154a8125bab116
1120 Author: Stefan Roese <sr@denx.de>
1121 Date: Fri Jun 6 15:55:03 2008 +0200
1123 ppc4xx: Unify AMCC's board config files (part 2/3)
1125 This patch series unifies the AMCC eval board ports by introducing
1126 a common include header for all AMCC eval boards:
1128 include/configs/amcc-common.h
1130 This header now includes all common configuration options/defines which
1131 are removed from the board specific headers.
1133 The reason for this is ease of maintenance and unified look and feel
1136 Signed-off-by: Stefan Roese <sr@denx.de>
1138 commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
1139 Author: Stefan Roese <sr@denx.de>
1140 Date: Fri Jun 6 15:54:31 2008 +0200
1142 ppc4xx: Unify AMCC's board config files (part 1/3)
1144 This patch series unifies the AMCC eval board ports by introducing
1145 a common include header for all AMCC eval boards:
1147 include/configs/amcc-common.h
1149 This header now includes all common configuration options/defines which
1150 are removed from the board specific headers.
1152 The reason for this is ease of maintenance and unified look and feel
1155 Signed-off-by: Stefan Roese <sr@denx.de>
1157 commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
1158 Author: Remy Bohmer <linux@bohmer.net>
1159 Date: Thu Jun 5 13:03:36 2008 +0200
1161 DM9000 fix status check fail 0x6d error for trizeps board
1163 According to the Application Notes of the DM9000, only the 2 bits 0:1 of
1164 the status byte need to be checked to identify a valid packet in the fifo
1166 But, The several different Application Notes do not all speak the same
1167 language on these bits. They do not disagree, but only 1 Application Note
1168 noted explicitly that only these 2 bits need to be checked.
1169 Even the datasheets do not mention anything about these 2 bits.
1171 Because the old code, and the kernel check the whole byte, I left this piece
1174 However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
1177 Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
1178 in the fifo) is much shorter now, compared to the older U-boot driver code,
1179 so that we can maybe run into a hardware condition now that was never seen
1180 before, or maybe was seen very unfrequently.
1182 Additionaly added a cleanup of a stack variable.
1184 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1185 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1187 commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
1188 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1189 Date: Thu Jun 5 22:29:00 2008 +0900
1191 [MIPS] Update <asm/addrspace.h> header
1193 - Fix traditional KSEG names
1194 - Replace PHYSADDR with CPHYSADDR
1196 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1198 commit f0d5a6f060d00358b85c62a921a423ea8df71184
1199 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1200 Date: Thu Jun 5 22:29:00 2008 +0900
1202 [MIPS] mips_config.mk: Misc fixes
1204 - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
1207 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1209 commit 5f64d21c9a2998794f255b469165b91f092dfc2d
1210 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1211 Date: Thu Jun 5 22:29:00 2008 +0900
1213 [MIPS] Kill unused <version.h> inclusions
1215 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1217 commit a55d48174cfd1a5bc184159513f48dcbbe409c83
1218 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1219 Date: Thu Jun 5 22:29:00 2008 +0900
1221 [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
1223 MIPS port has two problems in timer routines. One is now we assume CFG_HZ
1224 equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
1225 in the U-Boot system.
1227 The other is we don't have a proper time management counter like timestamp
1228 other ARCHs have. We need the 32-bit millisecond clock counter.
1230 This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
1231 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
1232 of calculated CP0 counter cycles in a CFG_HZ.
1236 * Fix improper CFG_HZ value to have 1000
1238 * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
1240 * timer_init: initialize timestamp and set up the first timer expiration.
1241 Note that we don't need to initialize CP0 count/compare registers here
1242 as they have been already zeroed out on the system reset. Leave them as
1245 * get_timer: calculate how many timestamps have been passed, then return
1246 base-relative timestamp. Make sure we can easily count missed timestamps
1247 regardless of CP0 count/compare value.
1249 * get_ticks: return the current timestamp, that is get_timer(0).
1251 Most parts are from good old Linux v2.6.16 kernel.
1254 - Remove FIXME comments as they turned out to be trivial.
1255 - Use CP0 compare register as a global variable for expirelo.
1256 - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
1259 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1261 commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
1262 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1263 Date: Thu Jun 5 22:29:00 2008 +0900
1265 [MIPS] lib_mips/time.c: Fix udelay
1267 What we have to do is just to wait for given micro-seconds. No need to
1268 take into account current time, get_timer and CFG_HZ.
1270 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1272 commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
1273 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1274 Date: Thu Jun 5 22:28:59 2008 +0900
1276 [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
1278 We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
1279 This patch replaces mips_{compare,count}_set and mips_count_get with
1282 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1284 commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
1285 Author: Remy Bohmer <linux@bohmer.net>
1286 Date: Tue Jun 3 15:48:17 2008 +0200
1288 Get rid of annoying/superfluous bad-checksum warning message
1290 U-boot can complain a lot about 'checksum bad' when it is attached to the network.
1291 It is annoying for ordinary users who start to doubt the network connection
1292 in general when they see messages like this.
1294 This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
1295 than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
1296 now before checking the checksum.
1298 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1299 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1301 commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
1302 Author: Remy Bohmer <linux@bohmer.net>
1303 Date: Wed Jun 4 10:47:25 2008 +0200
1305 Fix order for reading rx-status registers in 32bit mode of DM9000
1307 A last minute cleanup before submitting the DM9000A patch series yesterday introduced
1308 a bug in reading the rx-status registers in 32bit mode only.
1309 This patch repairs this.
1311 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1312 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1314 commit 98291e2e689096420465074cce926b226d2e71b4
1315 Author: Remy Bohmer <linux@bohmer.net>
1316 Date: Tue Jun 3 15:26:26 2008 +0200
1318 DM9000: Some minor code cleanups
1320 Some lines of the U-boot DM9000x driver are longer than 80 characters, or
1321 need some other minor cleanup.
1323 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1324 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1326 commit 850ba7555dbd4ca8d14fc475b864d534797adab3
1327 Author: Remy Bohmer <linux@bohmer.net>
1328 Date: Tue Jun 3 15:26:25 2008 +0200
1330 DM9000: Make driver work properly for DM9000A
1332 The DM9000A network controller does not work with the U-boot DM9000x driver.
1333 Analysis showed that many incoming packets are lost.
1335 The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
1336 check for a valid rx packet be done on the interrupt status register, not
1337 directly by performing the dummy read and the rx status check as is currently
1338 the case in the u-boot driver.
1340 When the recommended poll is done as suggested the driver starts working
1341 correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
1342 can be more than 1 package in the fifo at the same time.
1344 The driver must perform the rx-status check in a loop and read and handle all
1345 packages until there is no more left _after_ the interrupt RX flag is set.
1347 This change has been tested with DM9000A, DM9000E, DM9000EP.
1349 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1350 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1352 commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
1353 Author: Remy Bohmer <linux@bohmer.net>
1354 Date: Tue Jun 3 15:26:24 2008 +0200
1356 DM9000: Improve eth_reset() routine
1358 According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
1359 reset procedure must be done twice to properly reset the DM9000 by means of software.
1360 This errata is not needed anymore for the DM9000A, but it does not bother it.
1362 This change has been tested with DM9000A, DM9000E, DM9000EP.
1364 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1365 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1367 commit acba31847fad9ae40708cc2c9f3a634ec35f3416
1368 Author: Remy Bohmer <linux@bohmer.net>
1369 Date: Tue Jun 3 15:26:23 2008 +0200
1371 DM9000: improve eth_send() routine
1373 The eth_send routine of the U-boot DM9000x driver does not match the
1374 DM9000 or DM9000A application notes/programming guides.
1376 This change improves the stability of the DM9000A network controller.
1378 This change has been tested with DM9000A, DM9000E, DM9000EP.
1380 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1381 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1383 commit 134e266253c02a7832560da59d394989c4f64453
1384 Author: Remy Bohmer <linux@bohmer.net>
1385 Date: Tue Jun 3 15:26:22 2008 +0200
1387 DM9000: repair debug logging
1389 It seems that the debugging code of the DM9000x driver in U-boot has not been
1390 compiled for a long time, because it cannot compile...
1392 Also rearranged some loglines to get more useful info while debugging.
1394 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1395 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1397 commit a101361bfe23c120321e45d114c0603b8e0763e9
1398 Author: Remy Bohmer <linux@bohmer.net>
1399 Date: Tue Jun 3 15:26:21 2008 +0200
1401 DM9000: Add data bus-width auto detection.
1403 The U-boot DM9000x driver contains a compile time bus-width definition for
1404 the databus connected to the network controller.
1406 This compile check makes the code unclear, inflexible and is unneccessary.
1407 It can be asked to the network controller what its bus-width is by reading bits
1408 6 and 7 of the interrupt status register.
1410 The linux kernel already uses a runtime mechanism to determine this bus-width,
1411 so the implementation below looks somewhat like that implementation.
1413 This change has been tested with DM9000A, DM9000E, DM9000EP.
1415 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1416 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
1418 commit 63a0afa0c32e5f4ea98a9439542870072437404d
1419 Author: Stefan Roese <sr@denx.de>
1420 Date: Wed Jun 4 19:19:20 2008 +0200
1422 ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
1424 This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
1425 introduced by the commit:
1427 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
1429 With this patch SDRAM will get initialized again and booting from NAND
1432 Signed-off-by: Stefan Roese <sr@denx.de>
1433 Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
1435 commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
1436 Author: Wolfgang Denk <wd@denx.de>
1437 Date: Tue May 27 14:19:30 2008 +0200
1439 Socrates: Fix PCI bus frequency report
1441 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
1443 commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
1444 Author: Tor Krill <tor@excito.com>
1445 Date: Thu May 29 11:10:30 2008 +0200
1447 Fix incorrect switch for IF_TYPE in part.c
1449 Use correct field in block_dev_desc_t when writing interface type in
1450 dev_print. Error introduced in 574b3195.
1452 Also added fix from Martin Krause
1454 Signed-off-by: Tor Krill <tor@excito.com>
1456 commit b64b8a0bd310935b70af69ac970952f2b364ae56
1457 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
1458 Date: Tue May 27 10:25:39 2008 +0200
1460 Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
1462 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
1464 commit 35ef877f0a8f6232cdef748f442fed5accb2b641
1465 Author: Peter Tyser <ptyser@xes-inc.com>
1466 Date: Thu May 22 18:56:52 2008 -0500
1468 Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
1470 Removed unneeded command line history initialization. Also, the original
1471 code would access the 'initted' variable before relocation to SDRAM
1472 which resulted in erratic behavior since the bss is not initialized when
1473 executing from flash.
1475 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1477 commit 22f371b63038a4ecab04068877c1089e51a01ba1
1478 Author: Grant Erickson <gerickson@nuovations.com>
1479 Date: Wed May 21 13:28:30 2008 -0700
1481 PPC4xx: Simplified post_word_{load, store}
1483 This patch simplifies post_word_{load,store} by using the preprocessor
1484 to eliminate redundant, copy-and-pasted code.
1486 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
1488 commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
1489 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
1490 Date: Wed May 7 21:25:33 2008 +0400
1492 cfi_flash: enable M18 flash chips family support.
1494 Added new command set ID. Buffered write command processing is changed
1495 in order to support M18 flash chips family.
1497 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
1498 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
1500 commit 93c56f212ccdadc182018f0769cb284426b88f1d
1501 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
1502 Date: Wed May 7 21:24:44 2008 +0400
1504 cfi_flash: support of long cmd in U-boot.
1506 Some NOR flash chips needs support of commands with length grether than max
1507 value size of uchar. For example all M18 family chips use 0x1ff command in
1508 buffered write mode as value of program loops count.
1510 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
1511 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
1513 commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
1514 Author: Stefan Roese <sr@denx.de>
1515 Date: Fri May 16 11:06:06 2008 +0200
1517 DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
1519 On AD7414 the first value upon bootup is not read correctly.
1520 This is most likely because of the 800ms update time of the
1521 temp register in normal update mode. To get current values
1522 each time we issue the "dtt" command including upon powerup
1523 we switch into one-short mode.
1525 This patch fixes the problem on AD7414 equipped boards (Sequoia,
1526 Canyonlands etc), that temp value printed in the bootup log was
1529 Signed-off-by: Stefan Roese <sr@denx.de>
1531 commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
1532 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1533 Date: Fri May 30 16:55:06 2008 +0200
1535 ppc4xx: Cleanup CPCI405 variant's config file
1537 This patch removes some dead code from CPCI405 board's
1538 config files. JFFS2 support is also removed. It's not used and
1539 CPCI4052 does not build anymore without some size reduction.
1541 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1543 commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
1544 Author: Kenneth Johansson <kenneth@southpole.se>
1545 Date: Thu May 29 16:32:33 2008 +0200
1547 Remove shell variable UNDEF_SYM.
1549 UNDEF_SYM is a shell variable in the main Makefile used to force the
1550 linker to add all u-boot commands to the final image. It has no use here.
1552 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
1554 commit 8c66497e06bf803489c589df58ee591d71033274
1555 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1556 Date: Fri May 16 11:10:35 2008 +0200
1558 Add support for environment in SPI flash
1560 This is pretty incomplete...it doesn't handle reading the environment
1561 before relocation, it doesn't support redundant environment, and it
1562 doesn't support embedded environment. But apart from that, it does
1565 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1567 commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
1568 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1569 Date: Fri May 16 11:10:34 2008 +0200
1571 SPI Flash: Add "sf" command
1573 This adds a new command, "sf" which can be used to manipulate SPI
1574 flash. Currently, initialization, reading, writing and erasing is
1577 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1579 commit d25ce7d24cc0f93881559f4009175ea305af65e8
1580 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1581 Date: Fri May 16 11:10:33 2008 +0200
1585 This adds a new SPI flash subsystem.
1587 Currently, only AT45 DataFlash in non-power-of-two mode is supported,
1588 but some preliminary support for other flash types is in place as
1591 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1593 commit 60445cb5c3eb77ed1a07f2d908eef09174483698
1594 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
1595 Date: Fri May 16 11:10:32 2008 +0200
1597 atmel_spi: Driver for the Atmel SPI controller
1599 This adds a driver for the SPI controller found on most AT91 and AVR32
1600 chips, implementing the new SPI API.
1604 - Handle zero-length transfers appropriately. The user may send a
1605 zero-length SPI transfer with SPI_XFER_END set in order to
1606 deactivate the chip select after a series of transfers with chip
1607 select active. This is useful e.g. when polling the status
1608 register of DataFlash.
1610 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1612 commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
1613 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
1614 Date: Fri May 16 11:10:31 2008 +0200
1616 SPI API improvements
1618 This patch gets rid of the spi_chipsel table and adds a handful of new
1619 functions that makes the SPI layer cleaner and more flexible.
1621 Instead of the spi_chipsel table, each board that wants to use SPI
1622 gets to implement three hooks:
1623 * spi_cs_activate(): Activates the chipselect for a given slave
1624 * spi_cs_deactivate(): Deactivates the chipselect for a given slave
1625 * spi_cs_is_valid(): Determines if the given bus/chipselect
1626 combination can be activated.
1628 Not all drivers may need those extra functions however. If that's the
1629 case, the board code may just leave them out (assuming they know what
1630 the driver needs) or rely on the linker to strip them out (assuming
1631 --gc-sections is being used.)
1633 To set up communication parameters for a given slave, the driver needs
1634 to call spi_setup_slave(). This returns a pointer to an opaque
1635 spi_slave struct which must be passed as a parameter to subsequent SPI
1636 calls. This struct can be freed by calling spi_free_slave(), but most
1637 driver probably don't want to do this.
1639 Before starting one or more SPI transfers, the driver must call
1640 spi_claim_bus() to gain exclusive access to the SPI bus and initialize
1641 the hardware. When all transfers are done, the driver must call
1642 spi_release_bus() to make the bus available to others, and possibly
1643 shut down the SPI controller hardware.
1645 spi_xfer() behaves mostly the same as before, but it now takes a
1646 spi_slave parameter instead of a spi_chipsel function pointer. It also
1647 got a new parameter, flags, which is used to specify chip select
1648 behaviour. This may be extended with other flags in the future.
1650 This patch has been build-tested on all powerpc and arm boards
1651 involved. I have not tested NIOS since I don't have a toolchain for it
1652 installed, so I expect some breakage there even though I've tried
1653 fixing up everything I could find by visual inspection.
1655 I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
1656 DataFlash drivers posted as a follow-up. I'd like some help testing
1657 other boards that use the existing SPI API.
1659 But most of all, I'd like some comments on the new API. Is this stuff
1660 usable for everyone? If not, why?
1663 - Build fixes for various boards, drivers and commands
1664 - Provide common struct spi_slave definition that can be extended by
1666 - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
1667 - Make default bus and mode build-time configurable
1668 - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
1671 - Add opaque struct spi_slave for controller-specific data associated
1673 - Add spi_claim_bus() and spi_release_bus()
1674 - Add spi_free_slave()
1675 - spi_setup() is now called spi_setup_slave() and returns a
1677 - soft_spi now supports four SPI modes (CPOL|CPHA)
1678 - Add bus parameter to spi_setup_slave()
1679 - Convert the new i.MX32 SPI driver
1680 - Convert the new MC13783 RTC driver
1683 - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
1686 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
1687 Tested-by: Guennadi Liakhovetski <lg@denx.de>
1689 commit 289011207d999b2e4085150d2aa30d547ad9b800
1690 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1691 Date: Fri May 16 11:10:30 2008 +0200
1693 Move definition of container_of() to common.h
1695 AVR32 and AT91SAM9 both have their own identical definitions of
1696 container_of() taken from the Linux kernel. Move it to common.h so
1697 that all architectures can use it.
1699 container_of() is already used by some drivers, and will be used
1700 extensively by the new and improved SPI API.
1702 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1704 commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
1705 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1706 Date: Fri May 16 11:08:11 2008 +0200
1708 soft_i2c: Pull SDA high before reading
1710 Spotted by Dean Capindale.
1712 Systems that support open-drain GPIO properly are allowed provide an
1713 empty I2C_TRISTATE define. However, this means that we need to be
1714 careful not to drive SDA low when the slave is expected to respond.
1716 This patch adds a missing I2C_SDA(1) to read_byte() required to
1717 tristate the SDA line on systems that support open-drain GPIO.
1719 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1721 commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
1722 Author: Stefan Roese <sr@denx.de>
1723 Date: Mon May 19 11:34:53 2008 +0200
1725 ppc4xx: Remove implementations of testdram()
1727 This patch removes the used testdram() implementations of the board
1728 that are maintained by myself.
1730 Signed-off-by: Stefan Roese <sr@denx.de>
1732 commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
1733 Author: Stefan Roese <sr@denx.de>
1734 Date: Mon Jun 2 17:37:28 2008 +0200
1736 ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
1738 Historically the 405 U-Boot port had a dram_init() call in early init
1739 stage. This function was still called from start.S and most of the time
1740 coded in assembler. This is not needed anymore (since a long time) and
1741 boards should implement the common initdram() function in C instead.
1743 This patch now removed the dram_init() call from start.S and removes the
1744 empty implementations that are scattered through most of the 405 board
1745 ports. Some older board ports really implement this dram_init() though.
1755 I changed those boards to call this assembler dram_init() function now
1756 from their board specific initdram() instead. This *should* work, but please
1757 test again on those platforms. And it is perhaps a good idea that those
1758 boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
1759 some time. So further patches welcome here.
1761 Signed-off-by: Stefan Roese <sr@denx.de>
1763 commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
1764 Author: Stefan Roese <sr@denx.de>
1765 Date: Mon Jun 2 17:22:11 2008 +0200
1767 ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
1769 Signed-off-by: Stefan Roese <sr@denx.de>
1771 commit 39b32be18cd33b53a84065edcd4e465165cc5564
1772 Author: Stefan Roese <sr@denx.de>
1773 Date: Mon Jun 2 17:20:03 2008 +0200
1775 ppc4xx: Fix common ECC generation code for 440GP style platforms
1777 This patch makes the common 4xx ECC code really usable on 440GP style
1780 Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
1781 compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
1782 we need to make some processor dependant defines used later on by the
1785 Signed-off-by: Stefan Roese <sr@denx.de>
1787 commit ec724f883ee3f3925e6c55027e8ffa70ada83303
1788 Author: Stefan Roese <sr@denx.de>
1789 Date: Mon Jun 2 17:13:55 2008 +0200
1791 ppc4xx: Change Kilauea to use the common DDR2 init function
1793 This patch changes the kilauea and kilauea_nand (for NAND booting)
1794 board port to not use a board specific DDR2 init routine anymore. Now
1795 the common code from cpu/ppc4xx is used.
1797 Thanks to Grant Erickson for all his basic work on this 405EX early
1800 Signed-off-by: Stefan Roese <sr@denx.de>
1802 commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
1803 Author: Stefan Roese <sr@denx.de>
1804 Date: Mon Jun 2 14:59:21 2008 +0200
1806 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
1808 This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
1809 ppc4xx related SDRAM/DDR/DDR2 controller defines.
1811 Signed-off-by: Stefan Roese <sr@denx.de>
1813 commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
1814 Author: Stefan Roese <sr@denx.de>
1815 Date: Mon Jun 2 14:57:41 2008 +0200
1817 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
1819 This patch removes all SDRAM related defines from the PPC4xx headers
1820 ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
1821 the same SDRAM controller as 440 systems do (like 405EX and 440SP).
1823 It also introduces new defines for the equipped SDRAM controller based on
1824 which PPC variant is used. There new defines are:
1826 used on 405GR/CR/EP and some Xilinx Virtex boards.
1828 used on 440GP/GX/EP/GR.
1832 used on 405EX/r/440SP/SPe/460EX/GT.
1834 Signed-off-by: Stefan Roese <sr@denx.de>
1836 commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
1837 Author: Stefan Roese <sr@denx.de>
1838 Date: Mon Jun 2 14:35:44 2008 +0200
1840 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
1842 This patch consolidates the 405 and 440 parts of the NAND booting code
1843 selected via CONFIG_NAND_SPL. Now common code is used to initialize the
1844 SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
1845 Only *after* running from this location, nand_boot() is called.
1847 Please note that the initsdram() call is now moved from nand_boot.c
1848 to start.S. I experienced problems with some boards like Kilauea
1849 (405EX), which don't have internal SRAM (OCM) and relocation needs to
1850 be done to SDRAM before the NAND controller can get accessed. When
1851 initdram() is called later on in nand_boot(), this can lead to problems
1852 with variables in the bss sections like nand_ecc_pos[].
1854 Signed-off-by: Stefan Roese <sr@denx.de>
1855 Acked-by: Scott Wood <scottwood@freescale.com>
1857 commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
1858 Author: Grant Erickson <gerickson@nuovations.com>
1859 Date: Thu May 22 14:44:24 2008 -0700
1861 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
1863 This patch (Part 2 of 2):
1865 * Rolls up a suite of changes to enable correct primordial stack and
1866 global data handling when the data cache is used for such a purpose
1867 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
1869 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
1870 eliminating redundant ECC initialization implementations and moving
1871 redundant SDRAM initialization out of board code into shared 4xx
1874 * Enables MCSR visibility on the 405EX(r).
1876 * Enables the use of the data cache for initial RAM on
1877 both AMCC's Kilauea and Makalu and removes a redundant
1878 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
1880 - Removed, per Stefan Roese's request, defunct memory.c file for
1881 Makalu and rolled sdram_init from it into makalu.c.
1883 With respect to the 4xx DDR initialization and ECC unification, there
1884 is certainly more work that can and should be done (file renaming,
1885 etc.). However, that can be handled at a later date on a second or
1886 third pass. As it stands, this patch moves things forward in an
1887 incremental yet positive way for those platforms that utilize this
1888 code and the features associated with it.
1890 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
1891 Signed-off-by: Stefan Roese <sr@denx.de>
1893 commit c821b5f120bedf73867513466412587c6912a8f8
1894 Author: Grant Erickson <gerickson@nuovations.com>
1895 Date: Thu May 22 14:44:14 2008 -0700
1897 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
1899 This patch (Part 1 of 2):
1901 * Rolls up a suite of changes to enable correct primordial stack and
1902 global data handling when the data cache is used for such a purpose
1903 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
1905 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
1906 eliminating redundant ECC initialization implementations and moving
1907 redundant SDRAM initialization out of board code into shared 4xx
1910 * Enables MCSR visibility on the 405EX(r).
1912 * Enables the use of the data cache for initial RAM on
1913 both AMCC's Kilauea and Makalu and removes a redundant
1914 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
1916 - Removed, per Stefan Roese's request, defunct memory.c file for
1917 Makalu and rolled sdram_init from it into makalu.c.
1919 With respect to the 4xx DDR initialization and ECC unification, there
1920 is certainly more work that can and should be done (file renaming,
1921 etc.). However, that can be handled at a later date on a second or
1922 third pass. As it stands, this patch moves things forward in an
1923 incremental yet positive way for those platforms that utilize this
1924 code and the features associated with it.
1926 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
1927 Signed-off-by: Stefan Roese <sr@denx.de>
1929 commit a439680019e06171d4a5694b7992accce87f590e
1930 Author: Grant Erickson <gerickson@nuovations.com>
1931 Date: Wed May 21 13:28:30 2008 -0700
1933 PPC4xx: Simplified post_word_{load, store}
1935 This patch simplifies post_word_{load,store} by using the preprocessor
1936 to eliminate redundant, copy-and-pasted code.
1938 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
1940 commit f979690ee337450b2030aba128f95b7a8d9881c0
1941 Author: Kumar Gala <galak@kernel.crashing.org>
1942 Date: Thu May 15 15:13:08 2008 -0500
1944 Fix warnings from gcc-4.3.0 build on a ppc host
1946 * The cfi_flash.c memset fix actual allows the board to boot so there is
1947 a bit more going on here than just resolving warnings associated with
1948 uninitialized variables.
1950 * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
1951 inline function 'ext2_find_next_zero_bit' which is not static
1953 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1955 commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
1956 Author: Becky Bruce <becky.bruce@freescale.com>
1957 Date: Wed May 14 13:09:51 2008 -0500
1959 MPC512x: Change traps.c to not reference non-addressable memory
1961 Currently, END_OF_RAM is used by the trap code to determine if
1962 we should attempt to access the stack pointer or not. However,
1963 on systems with a lot of RAM, only a subset of the RAM is
1964 guaranteed to be mapped in and accessible. Change END_OF_RAM
1965 to use get_effective_memsize() instead of using the raw ram
1968 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
1970 commit 81673e9ae14b771cd13faf19947192599cae3959
1971 Author: Kumar Gala <galak@kernel.crashing.org>
1972 Date: Tue May 13 19:01:54 2008 -0500
1974 Make sure common.h is the first include.
1976 If common.h isn't first we can get CONFIG_ options defined in the
1977 board config file ignored. This can cause an issue if any of those
1978 config options impact the size of types of data structures
1979 (eg CONFIG_PHYS_64BIT).
1981 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1983 commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
1984 Author: Marian Balakowicz <m8@semihalf.com>
1985 Date: Tue May 13 15:53:29 2008 +0200
1987 Avoid initrd and logbuffer area overlaps
1989 Add logbuffer to reserved LMB areas to prevent initrd allocation
1990 from overlaping with it.
1992 Make sure to use correct logbuffer base address.
1994 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
1996 commit 6956d53d9934862507f83f0e3255dfd4662e7482
1997 Author: Sascha Laue <sascha.laue@liebherr.com>
1998 Date: Tue May 13 13:29:54 2008 +0200
2000 lwmon5: add memory-pattern-test to FPGA POST.
2002 commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
2003 Author: Becky Bruce <becky.bruce@freescale.com>
2004 Date: Thu May 8 19:02:51 2008 -0500
2006 PPC: 86xx Add bat registers to reginfo command
2008 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2010 commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
2011 Author: Becky Bruce <becky.bruce@freescale.com>
2012 Date: Fri May 9 15:41:35 2008 -0500
2014 PPC: Add print_bats() to lib_ppc/bat_rw.c
2016 This function prints the values of all the BAT register
2017 pairs - I needed this for debug earlier this week; adding it to
2018 lib_ppc so others can use it (and add it to reginfo commands
2021 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2023 commit c148f24c15743a02e855636e6bed013bd121f7f2
2024 Author: Becky Bruce <becky.bruce@freescale.com>
2025 Date: Thu May 15 21:29:04 2008 -0500
2027 PPC: Change lib_ppc/bat_rw.c to use high bats
2029 Currently, this code only deals with BATs 0-3, which makes
2030 it useless on systems that support BATs 4-7. Add the
2031 support for these registers.
2033 Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
2035 commit 31d826722434931e1152a09d140187dcf72f8aac
2036 Author: Becky Bruce <becky.bruce@freescale.com>
2037 Date: Thu May 8 19:02:12 2008 -0500
2039 PPC: Create and use CONFIG_HIGH_BATS
2041 Change all code that conditionally operates on high bat
2042 registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
2043 instead of the myriad ways this is done now. Define the option
2044 for every config for which high bats are supported (and
2045 enabled by early boot, on parts where they're not always
2048 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2050 commit aa3b8bf9c30065bb2ea852799d32db5020598495
2051 Author: Wolfgang Grandegger <wg@grandegger.com>
2052 Date: Wed May 28 19:55:19 2008 +0200
2054 E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
2056 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2057 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2059 commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
2060 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2061 Date: Wed May 28 13:06:25 2008 -0500
2063 ColdFire: Add 10 base ethernet support for mcf5445x
2065 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2066 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2068 commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
2069 Author: Jason McMullan <mcmullan@netapp.com>
2070 Date: Fri May 30 00:53:38 2008 +0900
2072 mips: Add an 'include/asm/errno.h', like all other architectures
2074 All other u-boot architectures have an include/asm/errno.h, so
2075 this change adds it to the mips include/asm-mips headers also.
2077 Stolen from Linux 2.6.25.
2079 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
2081 commit e2ad8426624bac457acc6925b6ff408e9bf20466
2082 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2083 Date: Fri May 30 00:53:38 2008 +0900
2085 [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
2087 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2089 commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
2090 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2091 Date: Fri May 30 00:53:38 2008 +0900
2093 [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
2095 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2097 commit bf462ae450a7f2eeeddc699ed345b391e3263540
2098 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2099 Date: Fri May 30 00:53:37 2008 +0900
2101 [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
2103 No functional changes.
2105 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2107 commit 89a1550ec6b74452274a7a23127936e2c7eec711
2108 Author: Jason McMullan <mcmullan@netapp.com>
2109 Date: Fri May 30 00:53:37 2008 +0900
2111 mips: If CONFIG_CMD_SPI is defined, call spi_init()
2113 The mips architecture currently does not call 'spi_init()' in the generic
2114 board initialization routine is CONFIG_CMD_SPI is defined.
2116 This patch rectifies that problem.
2118 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
2119 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2121 commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
2122 Author: Jason McMullan <mcmullan@netapp.com>
2123 Date: Fri May 30 00:53:37 2008 +0900
2125 [MIPS] lib_mips/board.c: Add nand_init
2127 This patch adds the standard 'nand_init()' call to the mips generic
2128 'board_init_r()' call, bringing MIPS in line with the other architectures.
2130 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
2131 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2133 commit d6ac2ed893c2168738aee01579d6283af8d37045
2134 Author: Scott Wood <scottwood@freescale.com>
2135 Date: Thu May 22 10:49:46 2008 -0500
2137 Remove prototypes of nand_init() in favor of including nand.h.
2139 Likewise with onenand_init().
2141 Signed-off-by: Scott Wood <scottwood@freescale.com>
2143 commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
2144 Author: Scott Wood <scottwood@freescale.com>
2145 Date: Thu May 22 10:49:00 2008 -0500
2147 Make onenand_uboot.h self-sufficient.
2149 Don't assume types are provided by previously included headers.
2151 Signed-off-by: Scott Wood <scottwood@freescale.com>
2153 commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
2154 Author: Dirk Behme <dirk.behme@gmail.com>
2155 Date: Wed Jan 16 14:26:59 2008 +0100
2157 nand: Correct NAND erase percentage output
2159 For NAND erase sizes smaller than one NAND erase block, erase
2160 percentage output becomes grater than 100% e.g.
2164 Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
2165 > nand erase 0x100000 0x2000
2166 NAND erase: device 0 offset 0x100000, size 0x2000
2167 Erasing at 0x100000 -- 200% complete.
2172 Correct this and give user a warning that more is erased than specified:
2175 > nand erase 0x100000 0x2000
2176 NAND erase: device 0 offset 0x100000, size 0x2000
2177 Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
2178 Erasing 0x00004000 instead
2179 Erasing at 0x100000 -- 100% complete.
2184 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
2186 commit 5922db6c0948506be91e0de44e7a6863a18a417f
2187 Author: Stelian Pop <stelian@popies.net>
2188 Date: Tue May 13 17:31:24 2008 +0200
2190 Cleanup nand_info[] declaration.
2192 The nand_info array is declared as extern in several .c files.
2193 Those days, nand.h contains a reference to the array, so there is
2194 no need to declare it elsewhere.
2196 Signed-off-by: Stelian Pop <stelian@popies.net>
2197 Signed-off-by: Scott Wood <scottwood@freescale.com>
2199 commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
2200 Author: Scott Wood <scottwood@freescale.com>
2201 Date: Mon May 19 09:30:43 2008 -0500
2203 NAND: Provide a sane default for NAND_MAX_CHIPS.
2205 This allows the header to be included regardless of whether a board's
2206 config file provides NAND-related defininitions.
2208 Signed-off-by: Scott Wood <scottwood@freescale.com>
2210 commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
2211 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2212 Date: Mon May 26 12:19:10 2008 +0200
2214 avr32: Fix theoretical race in udelay()
2216 If the specified delay is very short, the cycle counter may go past the
2217 "end" time we are waiting for before we get around to reading it.
2219 Fix it by checking the different between the cycle count "now" and the
2220 cycle count at the beginning. This will work as long as the delay
2221 measured in number of cycles is below 2^31.
2223 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2225 commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
2226 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2227 Date: Wed May 21 13:01:09 2008 +0200
2229 avr32: Compile atmel_mci.o conditionally
2231 Remove #ifdef CONFIG_MMC from the source file and use conditional
2232 compilation in the Makefile instead.
2234 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2236 commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
2237 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2238 Date: Thu May 22 12:28:25 2008 +0200
2240 avr32: Fix wrong error flags in atmel_mci driver
2242 Make sure we check for CRC errors when sending commands that use CRC
2245 Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
2246 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2248 commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
2249 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2250 Date: Wed May 21 11:10:59 2008 +0200
2252 avr32: Fix two warnings in atmel_mci.c
2254 The warnings are harmless but annoying. Let's fix them.
2256 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2258 commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
2259 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2260 Date: Mon May 19 11:36:28 2008 +0200
2262 avr32: Rework SDRAM initialization code
2264 This cleans up the SDRAM initialization and related code a bit, and
2265 allows faster booting.
2267 * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
2268 * Remove memory test from sdram_init() and make caller responsible
2269 for verifying the SDRAM and determining its size.
2270 * Remove base_address member from struct sdram_config (was sdram_info)
2271 * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
2272 * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
2274 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2276 commit 95107b7c028806919630bf02c653aa8f4f867c94
2277 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2278 Date: Mon May 19 11:27:37 2008 +0200
2280 avr32: Do stricter stack checking in the exception handler
2282 Don't do a stack dump if the stack pointer is outside the memory area
2285 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2287 commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
2288 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2289 Date: Fri May 2 15:32:57 2008 +0200
2291 avr32: Use the same entry point for reset and exception handling
2293 Since the reset vector is always aligned to a very large boundary, we
2294 can save a couple of KB worth of alignment padding by placing the
2295 exception vectors at the same address.
2297 Deciding which one it is is easy: If we're handling an exception, the
2298 CPU is in Exception mode. If we're starting up after reset, the CPU is
2299 in Supervisor mode. So this adds a very minimal overhead to the reset
2300 path (only executed once) and the exception handling path (normally
2301 never executed at all.)
2303 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2305 commit 0c16eed2189a190bd5655b33c029f809a9b31128
2306 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2307 Date: Fri May 2 15:24:22 2008 +0200
2309 avr32: Put memset in its own section
2311 All C code is compiled with -ffunction-sections -fdata-sections.
2312 Assembly functions should get their own sections as well so that
2313 everything looks consistent.
2315 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2317 commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
2318 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2319 Date: Fri May 2 15:21:40 2008 +0200
2321 avr32: Rename pm_init() as clk_init() and make SoC-specific
2323 pm_init() was always more about clock initialization than anything
2324 else. Dealing with PLLs, clock gating and such is also inherently
2325 SoC-specific, so move it into a SoC-specific directory.
2327 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2329 commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
2330 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2331 Date: Wed Apr 30 16:15:57 2008 +0200
2333 avr32: Use new-style Makefile for the at32ap platform
2335 This makes it easier to avoid compiling certain files later.
2337 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2339 commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
2340 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2341 Date: Wed Apr 30 14:36:47 2008 +0200
2343 avr32: Remove unused file cpu/at32ap/pm.c
2345 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2347 commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
2348 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2349 Date: Wed Apr 30 14:19:28 2008 +0200
2351 avr32: Clean up the HMATRIX code
2353 Rework the HMATRIX configuration interface so that it becomes easier
2354 to configure the HMATRIX for boards with special needs, and add new
2357 The HMATRIX header file has been split into a general,
2358 chip-independent part with register definitions, etc. and a
2359 chip-specific part with SFR bitfield definitions and master/slave
2362 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2364 commit 0a2e48792dd372c90b80059f3235e67a567e16fc
2365 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2366 Date: Thu Nov 22 12:14:11 2007 +0100
2368 avr32: Add support for the ATSTK1006 board
2370 This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
2371 board. It's currently in production and will be available soon.
2373 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2375 commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
2376 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2377 Date: Tue Apr 29 12:53:05 2008 +0200
2379 avr32: Get rid of the .flashprog section
2381 The .flashprog section was only needed back when we were running
2382 directly from flash, and it's even more useless on NGW100 since it
2383 uses the CFI flash driver which never used this workaround in the
2386 Remove it on STK1000 as well, and get rid of all the associated code and
2389 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2391 commit cdd42c0c7a5205fc380912d83229069a71ea3abf
2392 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2393 Date: Wed Apr 30 13:09:56 2008 +0200
2395 avr32: Use correct condition around macb clock accessors
2397 get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
2398 the chip has a MACB controller, not when it has a USART.
2400 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2402 commit f793a3581901ff39c2abb94012d9bbc8573ccf02
2403 Author: David Brownell <david-b@pacbell.net>
2404 Date: Wed Apr 16 22:57:58 2008 -0700
2406 avr32: Disable the AP7000 internal watchdog on startup
2408 This patch forces the watchdog off in all cases. That will at least
2409 get rid of the constant reboot cycle, though it won't let the watchdog
2410 actually run in the new kernels: its probe() comes up with a polite
2413 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2415 commit 55ac7a7490b55da56659f95d82a0c83b9756df27
2416 Author: David Brownell <david-b@pacbell.net>
2417 Date: Fri Feb 22 12:54:39 2008 -0800
2419 avr32: stk1002 and ngw100 convergence
2421 Make STK1002 and NGW100 boards act more alike:
2422 - STK boards can use as many arguments as NGW
2423 - STK boards don't need to manage FPGAs either
2424 - NGW commands should match STK ones
2426 Also spell U-Boot right in prompts for STK1002 and NGW100.
2428 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2429 [haavard.skinnemoen@atmel.com: update STK100[34] as well]
2430 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2432 commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
2433 Author: Sergei Poselenov <sposelenov@emcraft.com>
2434 Date: Tue May 27 13:47:00 2008 +0200
2436 Socrates: Fix PCI bus frequency report
2438 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2440 commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
2441 Author: Sergei Poselenov <sposelenov@emcraft.com>
2442 Date: Tue May 27 11:49:13 2008 +0200
2444 Socrates: Added USB support.
2446 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2448 commit 5a904e5637cff1d708dc67098004f83ba9e84c54
2449 Author: Sergei Poselenov <sposelenov@emcraft.com>
2450 Date: Tue May 27 11:35:02 2008 +0200
2452 USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
2454 In case of several PCI USB controllers on a board this variable
2455 specifys which controller to use.
2456 See doc/README.generic_usb_ohci for details.
2458 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2460 commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
2461 Author: Sergei Poselenov <sposelenov@emcraft.com>
2462 Date: Tue May 27 10:36:07 2008 +0200
2464 Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
2466 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2468 commit 83e9d7a2614d4006b92690afa3390c291734267e
2469 Author: Sergei Poselenov <sposelenov@emcraft.com>
2470 Date: Mon May 26 18:16:04 2008 +0200
2472 Socrates: Config file cleanup.
2474 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2476 commit 602cac1389b755b223272f2328a47e6f8c240848
2477 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2478 Date: Sat May 24 12:47:46 2008 +0200
2480 MAKEALL: add at91 list
2482 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2484 commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
2485 Author: Ron Madrid <ron_madrid@sbcglobal.net>
2486 Date: Fri May 23 15:37:05 2008 -0700
2488 Add Marvell 88E1118 support for TSEC
2490 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
2491 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2493 commit 557b377d8bfc8b833b6e749457bcdfa298331a24
2494 Author: Jens Gehrlein <sew_s@tqs.de>
2495 Date: Mon May 5 14:06:11 2008 +0200
2497 smc911x: add 16 bit support
2499 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
2500 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2502 commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
2503 Author: Christian Eggers <ceggers@gmx.de>
2504 Date: Wed May 21 22:12:00 2008 +0200
2506 USB: replace old swap_ with proper endianess conversion macros
2508 Signed-off-by: Christian Eggers <ceggers@gmx.de>
2509 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2511 commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
2512 Author: Christian Eggers <ceggers@gmx.de>
2513 Date: Wed May 21 21:29:10 2008 +0200
2515 Fix endianess conversion in usb_ohci.c
2517 Signed-off-by: Christian Eggers <ceggers@gmx.de>
2518 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2520 commit 477434c63c2ea5baa5c6c4e43500786f436511ff
2521 Author: Sergei Poselenov <sposelenov@emcraft.com>
2522 Date: Thu May 22 01:15:53 2008 +0200
2524 USB: add support for multiple PCI OHCI controllers
2526 Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
2527 In case of several PCI USB controllers on a board this variable
2528 specifys which controller to use.
2530 Also add USB support for sokrates board.
2532 See doc/README.generic_usb_ohci for details.
2534 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2535 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2537 commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
2538 Author: Wolfgang Denk <wd@denx.de>
2539 Date: Wed May 21 16:56:08 2008 +0200
2541 Fix some whitespace issues
2543 introduced by 53677ef18 "Big white-space cleanup."
2545 Signed-off-by: Wolfgang Denk <wd@denx.de>
2547 commit 4416603aeb06861b468b06a981e52c3ff805db7b
2548 Author: York Sun <yorksun@freescale.com>
2549 Date: Mon May 12 14:36:39 2008 -0500
2551 Make ads5121 out-of-tree compiling safe
2553 Reuse the existing DIU driver in board/freescale/common.
2555 Signed-off-by: York Sun <yorksun@freescale.com>
2557 commit 0e1bad47cd345c76c91a64caf41011e431b62599
2558 Author: York Sun <yorksun@freescale.com>
2559 Date: Mon May 5 10:20:01 2008 -0500
2561 Adding DIU support for Freescale 5121ADS
2563 Add DIU and cfb console support to FSL 5121ADS board.
2565 Use #define CONFIG_VIDEO in config file to enable fb console.
2567 Signed-off-by: York Sun <yorksun@freescale.com>
2569 commit a48ff68d235e671176f6b496c44246dbe5e0a93f
2570 Author: York Sun <yorksun@freescale.com>
2571 Date: Mon May 5 10:20:00 2008 -0500
2573 Replace DPRINTF with debug
2575 Remove DPRINTF macro and replace it with generic debug macro.
2577 Signed-off-by: York Sun <yorksun@freescale.com>
2579 commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
2580 Author: York Sun <yorksun@freescale.com>
2581 Date: Mon May 5 10:19:59 2008 -0500
2583 Move pixel clock setting to board file
2585 The clock divider has different format in 5121 and 8610. This patch moves it to
2586 board specific code.
2588 Signed-off-by: York Sun <yorksun@freescale.com>
2590 commit 53677ef18e25c97ac613349087c5cb33ae5a2741
2591 Author: Wolfgang Denk <wd@denx.de>
2592 Date: Tue May 20 16:00:29 2008 +0200
2594 Big white-space cleanup.
2596 This commit gets rid of a huge amount of silly white-space issues.
2597 Especially, all sequences of SPACEs followed by TAB characters get
2598 removed (unless they appear in print statements).
2600 Also remove all embedded "vim:" and "vi:" statements which hide
2601 indentation problems.
2603 Signed-off-by: Wolfgang Denk <wd@denx.de>
2605 commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
2606 Author: Sergei Poselenov <sposelenov@emcraft.com>
2607 Date: Thu May 8 17:46:23 2008 +0200
2609 socrates: fix second TSEC configuration (it is actually TSEC3)
2611 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2613 commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
2614 Author: Sergei Poselenov <sposelenov@emcraft.com>
2615 Date: Thu May 8 14:17:08 2008 +0200
2617 Fixed reset for socrates
2619 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2621 commit e18575d5f589a62e19c70d471d4b4e27cad3af56
2622 Author: Sergei Poselenov <sposelenov@emcraft.com>
2623 Date: Wed May 7 15:10:49 2008 +0200
2625 socrates: changes to support FDT
2627 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2628 Signed-off-by: Wolfgang Denk <wd@denx.de>
2630 commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
2631 Author: Sergei Poselenov <sposelenov@emcraft.com>
2632 Date: Wed Apr 30 11:42:50 2008 +0200
2634 Initial support for "Socrates" board
2636 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2638 commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
2639 Author: Yuri Tikhonov <yur@emcraft.com>
2640 Date: Thu May 8 15:46:42 2008 +0200
2642 POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
2644 This way we become able to utilize the full post_log_word for POST
2645 activities (overwise, POST ECC, which has 0x8000 ID, could be
2646 erroneously treated as started in post_output_backlog() even if there
2647 was actually no POST ECC run (because of OCM POST failure, for
2650 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2652 commit 7845d49094c81321021b50a4dbb8864d2f3777e4
2653 Author: Yuri Tikhonov <yur@emcraft.com>
2654 Date: Thu May 8 15:46:02 2008 +0200
2656 POST: mark OCM test as POST_STOP
2658 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2660 commit 28a385065882d6cb6ac5f443311ff87887ed7c13
2661 Author: Yuri Tikhonov <yur@emcraft.com>
2662 Date: Thu May 8 15:45:26 2008 +0200
2664 POST: add POST_STOP flag
2666 Don't run futher tests in case of a test fails that is marked as
2669 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2670 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2672 commit a525145d8110d15b4389d23c3ea8a78f22509d3f
2673 Author: Yuri Tikhonov <yur@emcraft.com>
2674 Date: Thu May 8 15:44:16 2008 +0200
2676 POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
2678 Switch the OCM testid with the codec one. The reason is that current
2679 implementation requires the POST_ROM testid to fit into lower 16
2680 bits, and the codec test will never run with POST_ROM hopefully.
2682 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2684 commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
2685 Author: Yuri Tikhonov <yur@emcraft.com>
2686 Date: Thu May 8 15:43:28 2008 +0200
2688 lwmon5: enable OCM post test on lwmon5 board
2690 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2692 commit 6e8ec682268493b8d098f99e17b1ce71b4448977
2693 Author: Yuri Tikhonov <yur@emcraft.com>
2694 Date: Thu May 8 15:42:47 2008 +0200
2696 POST: OCM test added.
2698 Added OCM test to POST layer. This version runs before all other tests
2699 but doesn't yet interrupt post sequence on failure.
2701 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2702 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2704 commit 6891260bdd935a382c95d9fa333922b0dfded68a
2705 Author: Yuri Tikhonov <yur@emcraft.com>
2706 Date: Thu May 8 15:40:39 2008 +0200
2710 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2712 commit 727f63334676e760877d43bfb8f0e9331ac8b101
2713 Author: Hebbar <gururajakr@sanyo.co.in>
2714 Date: Tue May 20 02:16:36 2008 -0700
2716 common/usb.c: fix incorrect escape sequence
2718 Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
2720 commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
2721 Author: York Sun <yorksun@freescale.com>
2722 Date: Thu May 15 15:26:27 2008 -0500
2724 Fix 8313ERDB board configuration
2726 Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
2727 Correct TSEC1 vs TSEC2 assignment.
2728 Define ETHADDR and ETH1ADDR always.
2730 Signed-off-by: York Sun <yorksun@freescale.com>
2731 Signed-off-by: Timur Tabi <timur@freescale.com>
2733 commit 2c289e320dcfb3760e99cf1d765cb067194a1202
2734 Author: Jon Loeliger <jdl@freescale.com>
2735 Date: Mon May 19 09:47:25 2008 -0500
2737 mpc86xx: Removed unused and unconfigured memory test code.
2739 Besides, other common code exists.
2741 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2743 commit 180a90abdae72587c0f679edf8991455e559440d
2744 Author: Wolfgang Denk <wd@denx.de>
2745 Date: Mon May 19 12:47:11 2008 +0200
2749 Update CHANGELOG for release.
2751 Signed-off-by: Wolfgang Denk <wd@denx.de>
2753 commit 16bedc661de0dae767b1377d8413373a3fbcfa79
2754 Author: Stefan Roese <sr@denx.de>
2755 Date: Mon May 19 07:14:38 2008 +0200
2757 ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
2759 When SATA is selected (via jumper J6) we need to disable the first PCIe
2760 node in the device tree, so that Linux doesn't initialize it. Otherwise
2761 the Linux SATA driver will fail to detect the devices.
2763 The same goes the other way around too. So if PCIe is selected we need
2764 to disable the SATA node in the device tree.
2766 This is because PCIe port 0 and SATA on 460EX share the same pins
2767 (multiplexed) and we have to configure in U-Boot which peripheral is
2770 Signed-off-by: Stefan Roese <sr@denx.de>
2772 commit 3cc27b426aeefe2930f911692e9df3143fb2565f
2773 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2774 Date: Sun May 18 19:09:58 2008 +0200
2776 i386: Fix multiple definitions of __show_boot_progress
2778 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2780 commit 311f3446930c1e64c12026c1cfd00500b05be52d
2781 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2782 Date: Sun May 18 19:09:57 2008 +0200
2784 sc530_spunk: add missing SOBJS entry
2786 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2788 commit a559317143b4f95927b08cd388707e6f077e95fa
2789 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2790 Date: Sun May 18 19:09:56 2008 +0200
2792 sc520_spunk: Fix flash
2794 flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
2795 flash.c:398: error: label at end of compound statement
2797 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2799 commit 91f221317af64191ee8caf303ea9305943158691
2800 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2801 Date: Sun May 18 19:09:49 2008 +0200
2803 drivers/pcmcia: add missing i82365
2805 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2807 commit dd223944132f97ffa52977ea95e5a52428f5cc2f
2808 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2809 Date: Sun May 18 19:09:47 2008 +0200
2811 i386/bootm: remove unused var
2813 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2815 commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
2816 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2817 Date: Sun May 18 19:09:45 2008 +0200
2819 example/gitignore: update with all generated examples
2821 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2823 commit a38dc3ea8614f8b0c41e432b445a9959b9711295
2824 Author: Wolfgang Denk <wd@denx.de>
2825 Date: Thu May 15 00:42:45 2008 +0200
2827 TQM8272: fix out-of-tree building
2829 ...and add to MAKEALL script
2831 Signed-off-by: Wolfgang Denk <wd@denx.de>
2833 commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
2834 Author: Wolfgang Denk <wd@denx.de>
2835 Date: Wed May 14 23:34:53 2008 +0200
2837 environment: fix bug introduced by commit a8409f4f1ac8
2839 env_get_char is not a function, but a pointer to one.
2841 Signed-off-by: Wolfgang Denk <wd@denx.de>
2843 commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
2844 Author: Gary Jennejohn <garyj@denx.de>
2845 Date: Wed May 14 13:39:22 2008 +0200
2847 ppc4xx: QUAD100HD: Allow the environment to be put into flash.
2849 After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
2850 use a redundant environment.
2852 Signed-off-by: Gary Jennejohn <garyj@denx.de>
2854 commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
2855 Author: Wolfgang Denk <wd@denx.de>
2856 Date: Wed May 14 13:55:30 2008 +0200
2858 Fix config files for out-of-tree building
2860 Several board/<...>/config.mk files include dynamically built (by
2861 the Makefile) config files but used the wrong file name of
2862 $(TOPDIR)/board/$(BOARDDIR)/config.tmp
2863 instead if the correct
2864 $(OBJTREE)/board/$(BOARDDIR)/config.tmp
2866 The bug is nasty because the build result is correct for the (normal)
2867 in-tree builds, and because 'sinclude' is used no errors get raised
2868 even for out-of-tree build tests. But out-of-tree builds use an
2869 incomplete and thus usually incorrect configuration...
2871 Signed-off-by: Wolfgang Denk <wd@denx.de>
2873 commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
2874 Author: Stefan Roese <sr@denx.de>
2875 Date: Wed May 14 13:40:03 2008 +0200
2877 ppc4xx: Fix bogus Canyonlands config.mk
2879 This patch fixes the canyonlands config.mk file to enable correct
2880 out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
2882 Signed-off-by: Stefan Roese <sr@denx.de>
2884 commit fdd1247a66d788a3446244f6fde9955a93c26322
2885 Author: Stefan Roese <sr@denx.de>
2886 Date: Wed May 14 10:32:32 2008 +0200
2888 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
2890 Canyonlands has a file ddr2_fixed.c which needs special treatment when
2891 building in separate directory. It has to be linked to build directory
2892 otherwise it is not seen.
2894 Signed-off-by: Stefan Roese <sr@denx.de>
2896 commit a8409f4f1ac84c36273c1a1e341189662521bcfb
2897 Author: Wolfgang Denk <wd@denx.de>
2898 Date: Wed May 14 12:22:49 2008 +0200
2900 environment: cleanup prototype declarations of env functions.
2902 Signed-off-by: Wolfgang Denk <wd@denx.de>
2904 commit cf39b07948015c480b72a6e732cf7d839aa93a9e
2905 Author: Wolfgang Denk <wd@denx.de>
2906 Date: Wed May 14 12:21:48 2008 +0200
2908 linkstation_HGLAN: Fix out of tree building.
2910 Signed-off-by: Wolfgang Denk <wd@denx.de>
2912 commit 085551c05ca09e6c491ea11a1c6727a36776a545
2913 Author: Stefan Roese <sr@denx.de>
2914 Date: Wed May 14 10:32:32 2008 +0200
2916 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
2918 Canyonlands has a file ddr2_fixed.c which needs special treatment when
2919 building in separate directory. It has to be linked to build directory
2920 otherwise it is not seen.
2922 Signed-off-by: Stefan Roese <sr@denx.de>
2924 commit 1510b82d50615f344e89d42533e8224cce067dc0
2925 Author: Wolfgang Denk <wd@denx.de>
2926 Date: Tue May 13 23:15:52 2008 +0200
2928 Makefile: fix "error: version_autogenerated.h: No such file or directory"
2930 Signed-off-by: Wolfgang Denk <wd@denx.de>
2932 commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
2933 Author: Stelian Pop <stelian@popies.net>
2934 Date: Tue May 13 17:31:24 2008 +0200
2936 Cleanup nand_info[] declaration.
2938 The nand_info array is declared as extern in several .c files.
2939 Those days, nand.h contains a reference to the array, so there is
2940 no need to declare it elsewhere.
2942 Signed-off-by: Stelian Pop <stelian@popies.net>
2943 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2945 commit 70fab1908fc1734a403711eaabbef546bc4b77dc
2946 Author: Stefan Roese <sr@denx.de>
2947 Date: Tue May 13 20:22:01 2008 +0200
2949 ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
2951 Signed-off-by: Stefan Roese <sr@denx.de>
2953 commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
2954 Author: Wolfgang Denk <wd@denx.de>
2955 Date: Mon May 12 01:11:21 2008 +0200
2957 Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
2959 This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
2960 which broke many PowerPC boards.
2962 commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
2963 Author: Wolfgang Denk <wd@denx.de>
2964 Date: Mon May 12 00:56:28 2008 +0200
2966 Revert "Avoid initrd and logbuffer area overlaps"
2968 This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
2969 which breaks building on all PPC boards that don't use a log buffer.
2971 commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
2972 Author: Nick Spence <nick.spence@freescale.com>
2973 Date: Sat May 10 14:02:04 2008 -0700
2975 Fix offset calculation for multi-type legacy images.
2977 Calculation of tail was incorrect when size % 4 == 0.
2979 New code removes the conditional and does the same thing but with arithmetic
2981 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2983 commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
2984 Author: Wolfgang Denk <wd@denx.de>
2985 Date: Mon May 12 00:40:58 2008 +0200
2987 Revert "Change env_get_char from a global function ptr to a function."
2989 This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
2990 which is known to break booting from dataflash and NAND.
2992 commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
2993 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2994 Date: Sun May 11 23:13:57 2008 +0200
2996 API: remove duplicate syscall check
2998 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3000 commit 67e3beb52c320b0a31cf030716c99392cde2d532
3001 Author: Stelian Pop <stelian@popies.net>
3002 Date: Fri May 9 21:46:51 2008 +0200
3004 AT91: Cleanup unused config header file definitions.
3006 CONFIG_ENV_OVERWRITE is commented out in the config header files,
3007 so let's cleanup the files by removing the whole definition.
3009 Signed-off-by: Stelian Pop <stelian@popies.net>
3010 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3012 commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
3013 Author: Stelian Pop <stelian@popies.net>
3014 Date: Thu May 8 14:52:34 2008 +0200
3016 Support AT91CAP9 revC CPUs
3018 The AT91CAP9 revC CPU has a few differences over the previous,
3019 revB CPU which was distributed in small quantities only (revA was
3020 an internal Atmel product only).
3022 The revC silicon needs a special initialisation sequence to
3023 switch from the internal (imprecise) RC oscillator to the
3026 Signed-off-by: Stelian Pop <stelian@popies.net>
3027 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3029 commit 098b7b4b441b12c2a64dd517930f43c793542759
3030 Author: Stelian Pop <stelian@popies.net>
3031 Date: Thu May 8 14:52:33 2008 +0200
3033 Use custom logo for Atmel boards
3035 This patch adds a custom vendor logo for the Atmel AT91 boards.
3037 Signed-off-by: Stelian Pop <stelian@popies.net>
3038 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3040 commit 761c70b80cdd3bead40146b96a8e713d6ae01632
3041 Author: Stelian Pop <stelian@popies.net>
3042 Date: Thu May 8 14:52:32 2008 +0200
3044 AT91SAM9RLEK: hook up the ATMEL LCD driver
3046 This patch makes the necessary adaptations (PIO configurations and
3047 defines in config header file) to hook up the Atmel LCD driver to the
3050 Signed-off-by: Stelian Pop <stelian@popies.net>
3051 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3053 commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
3054 Author: Stelian Pop <stelian@popies.net>
3055 Date: Thu May 8 14:52:31 2008 +0200
3057 AT91SAM9263EK: hook up the ATMEL LCD driver
3059 This patch makes the necessary adaptations (PIO configurations and
3060 defines in config header file) to hook up the Atmel LCD driver to the
3061 AT91SAM9263EK board.
3063 Signed-off-by: Stelian Pop <stelian@popies.net>
3064 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3066 commit 820f2a958325061a446115f3035e48e4726b3390
3067 Author: Stelian Pop <stelian@popies.net>
3068 Date: Thu May 8 14:52:30 2008 +0200
3070 AT91SAM9261EK: hook up the ATMEL LCD driver
3072 This patch makes the necessary adaptations (PIO configurations and
3073 defines in config header file) to hook up the Atmel LCD driver to the
3074 AT91SAM9261EK board.
3076 Signed-off-by: Stelian Pop <stelian@popies.net>
3077 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3079 commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
3080 Author: Stelian Pop <stelian@popies.net>
3081 Date: Thu May 8 14:52:29 2008 +0200
3083 AT91CAP9ADK: hook up the ATMEL LCD driver
3085 This patch makes the necessary adaptations (PIO configurations and
3086 defines in config header file) to hook up the Atmel LCD driver to the
3089 Signed-off-by: Stelian Pop <stelian@popies.net>
3090 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3092 commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
3093 Author: Stelian Pop <stelian@popies.net>
3094 Date: Fri May 9 21:57:18 2008 +0200
3096 Add ATMEL LCD driver
3098 This patch adds support for the ATMEL LCDC driver which is used on some
3099 AT91 and AVR platforms.
3101 Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
3102 AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
3104 Signed-off-by: Stelian Pop <stelian@popies.net>
3105 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3107 commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
3108 Author: Stelian Pop <stelian@popies.net>
3109 Date: Thu May 8 18:52:25 2008 +0200
3111 AT91SAM9RLEK support
3113 This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
3116 Signed-off-by: Stelian Pop <stelian@popies.net>
3117 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3119 commit 8e429b3eee23927c1222679f6b6f53667b21595c
3120 Author: Stelian Pop <stelian@popies.net>
3121 Date: Thu May 8 18:52:23 2008 +0200
3123 AT91SAM9263EK support
3125 This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
3128 Signed-off-by: Stelian Pop <stelian@popies.net>
3129 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3131 commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
3132 Author: Stelian Pop <stelian@popies.net>
3133 Date: Thu May 8 20:52:22 2008 +0200
3135 AT91SAM9261EK support
3137 This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
3140 Signed-off-by: Stelian Pop <stelian@popies.net>
3141 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3143 commit 86c8c8a414988c50104a3b02c29f50af2be738c0
3144 Author: Stelian Pop <stelian@popies.net>
3145 Date: Thu May 8 20:52:21 2008 +0200
3147 AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
3149 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
3150 in order to cope with the changes in DataFlash partitionning scheme
3153 Signed-off-by: Stelian Pop <stelian@popies.net>
3154 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3156 commit 96996ac25d5222611a8888968db6e53a6d3726da
3157 Author: Stelian Pop <stelian@popies.net>
3158 Date: Thu May 8 20:52:20 2008 +0200
3160 AT91SAM9260EK: Normalize BOOTARGS
3162 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
3163 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
3166 Signed-off-by: Stelian Pop <stelian@popies.net>
3167 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3169 commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
3170 Author: Stelian Pop <stelian@popies.net>
3171 Date: Thu May 8 20:52:19 2008 +0200
3173 AT91SAM9260EK: Normalize SPI timings
3175 This patch changes the SPI timings to closely match the ones
3176 used by the Linux kernel and the Atmel's own bootstrap project.
3178 Signed-off-by: Stelian Pop <stelian@popies.net>
3179 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3181 commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
3182 Author: Stelian Pop <stelian@popies.net>
3183 Date: Thu May 8 20:52:18 2008 +0200
3185 AT91SAM9260EK: Handle 8 or 16 bit NAND
3187 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
3188 makes the support configurable in the board config header file
3189 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
3191 Signed-off-by: Stelian Pop <stelian@popies.net>
3192 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3194 commit ab52640fc01624e208424e527af0b7b3a5a65a12
3195 Author: Stelian Pop <stelian@popies.net>
3196 Date: Thu May 8 20:52:17 2008 +0200
3198 AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
3200 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
3201 in order to cope with the changes in DataFlash partitionning scheme
3204 Signed-off-by: Stelian Pop <stelian@popies.net>
3205 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3207 commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
3208 Author: Stelian Pop <stelian@popies.net>
3209 Date: Thu May 8 20:52:16 2008 +0200
3211 AT91CAP9ADK: Normalize BOOTARGS
3213 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
3214 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
3217 Signed-off-by: Stelian Pop <stelian@popies.net>
3218 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3220 commit 93da48b910511911ce110656e17ed733c8ac4c45
3221 Author: Stelian Pop <stelian@popies.net>
3222 Date: Thu May 8 20:52:15 2008 +0200
3224 AT91CAP9ADK: Normalize SPI timings
3226 This patch changes the SPI timings to closely match the ones
3227 used by the Linux kernel and the Atmel's own bootstrap project.
3229 Signed-off-by: Stelian Pop <stelian@popies.net>
3230 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3232 commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
3233 Author: Stelian Pop <stelian@popies.net>
3234 Date: Thu May 8 20:52:14 2008 +0200
3236 AT91CAP9ADK: Handle 8 or 16 bit NAND
3238 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
3239 makes the support configurable in the board config header file
3240 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
3242 Signed-off-by: Stelian Pop <stelian@popies.net>
3243 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3245 commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
3246 Author: Stelian Pop <stelian@popies.net>
3247 Date: Thu May 8 20:52:13 2008 +0200
3249 Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
3251 All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
3252 below avoids the duplication of u-boot.lds by putting the file in the
3253 cpu directory instead of the board one.
3255 Signed-off-by: Stelian Pop <stelian@popies.net>
3256 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3258 commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
3259 Author: Stelian Pop <stelian@popies.net>
3260 Date: Thu May 8 20:52:12 2008 +0200
3262 Add proper copyright notices in Atmel boards Makefiles
3264 The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
3265 copyright notice. This patch adds the missing pieces.
3267 Signed-off-by: Stelian Pop <stelian@popies.net>
3268 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3270 commit e817a042cef6164bf26fee86f90326f2ec9e6745
3271 Author: Stelian Pop <stelian@popies.net>
3272 Date: Thu May 8 20:52:11 2008 +0200
3274 Add copyright information in Atmel boards partition.c
3276 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
3277 the new created files. This patch fixes the problem.
3279 Signed-off-by: Stelian Pop <stelian@popies.net>
3280 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3282 commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
3283 Author: Stelian Pop <stelian@popies.net>
3284 Date: Thu May 8 20:52:10 2008 +0200
3286 Update origin and copyright information in arch-at91sam9 header files
3288 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
3289 copied from the Linux kernel sources. This patch explicitly specifies
3290 this origin for all the copied headers, and for those missing copyright
3291 information, adds it.
3293 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
3294 in the latest kernel sources by 'at91sam9_smc.h'.
3296 The copyright information has been confirmed by the AT91 Linux kernel
3297 maintainer, Andrew Victor <avictor.za@gmail.com>.
3299 Signed-off-by: Stelian Pop <stelian@popies.net>
3300 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3302 commit 79dd1712689d6a5031d7cbff54957049680751c7
3303 Author: Markus Klotzbücher <mk@denx.de>
3304 Date: Thu May 8 16:00:55 2008 +0200
3306 ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
3308 When using dhcp/bootp the "netmask" environment variable is not set
3309 because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
3310 desireable, so the following patch adds this this option to the board
3313 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
3314 Signed-off-by: Stefan Roese <sr@denx.de>
3316 commit 869d14b4cc2e47de2ddcb117bad0407a44436684
3317 Author: Stefan Roese <sr@denx.de>
3318 Date: Sat May 10 10:30:36 2008 +0200
3320 ppc4xx: Update Makalu defconfig to use device-tree booting as default
3322 This patch reworks the default environment on Makalu. Now "net_nfs" for
3323 example uses the device-tree style booting formerly know as "net_nfs_fdt".
3324 Also the addresses in RAM were changed because of the new image booting
3325 support, which check for image overwriting. So the addresses needed to
3328 Signed-off-by: Stefan Roese <sr@denx.de>
3330 commit f3612a7b199cab3942f60d9c1392eb39d58cc699
3331 Author: Becky Bruce <bgill@freescale.com>
3332 Date: Wed May 7 13:28:16 2008 -0500
3334 PPC: fix map_physmem build warning
3336 map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
3337 enabled. This quiets the warning.
3339 Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
3341 commit 36f32675f40292002ee1fed252c180a43022d2d4
3342 Author: Becky Bruce <bgill@freescale.com>
3343 Date: Wed May 7 13:24:57 2008 -0500
3345 Update pci code to use phys_addr_t
3347 Physical addrs need to be represented by phys_addr_t, not
3348 unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
3349 are going to fail mightily.
3351 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
3353 commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
3354 Author: Nick Spence <nick.spence@freescale.com>
3355 Date: Thu May 8 22:32:22 2008 -0700
3357 Support legacy multi-type images without FDT section.
3359 This patch enables legacy multi-type images containing only a Linux kernel
3360 and root file system to be loaded, maintaining compatibility with previous
3363 This is required when using old image files such as a Linux 2.4 kernel /
3366 Signed-off-by: Nick Spence <nick.spence@freescale.com>
3367 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
3369 commit 881031d9732783b7aeae2198fc7eb480ae8974a6
3370 Author: Wolfgang Denk <wd@denx.de>
3371 Date: Sat May 10 00:38:02 2008 +0200
3375 Signed-off-by: Wolfgang Denk <wd@denx.de>
3377 commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
3378 Author: Wolfgang Denk <wd@denx.de>
3379 Date: Sat May 10 00:36:09 2008 +0200
3381 post/cpu/ppc4xx/Makefile: line length cleanup
3383 Signed-off-by: Wolfgang Denk <wd@denx.de>
3385 commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
3386 Author: Stelian Pop <stelian@popies.net>
3387 Date: Thu May 8 22:52:09 2008 +0200
3389 Fix @ -> <at> substitution
3391 When applying the AT91CAP9 patches upstream, something transformed
3392 the '@' character into the ' <at> ' sequence.
3394 The patch below restores the original form in all the places where
3395 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
3396 were copied from AT91CAP9, and a couple of other files where the
3397 ' <at> ' sequence was present).
3399 Signed-off-by: Stelian Pop <stelian@popies.net>
3401 commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
3402 Author: Stelian Pop <stelian@popies.net>
3403 Date: Thu May 8 22:52:10 2008 +0200
3405 Update origin and copyright information in arch-at91sam9 header files
3407 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
3408 copied from the Linux kernel sources. This patch explicitly specifies
3409 this origin for all the copied headers, and for those missing copyright
3410 information, adds it.
3412 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
3413 in the latest kernel sources by 'at91sam9_smc.h'.
3415 The copyright information has been confirmed by the AT91 Linux kernel
3416 maintainer, Andrew Victor <avictor.za@gmail.com>.
3418 Signed-off-by: Stelian Pop <stelian@popies.net>
3420 commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
3421 Author: Stelian Pop <stelian@popies.net>
3422 Date: Thu May 8 22:52:11 2008 +0200
3424 Add copyright information in Atmel boards partition.c
3426 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
3427 the new created files. This patch fixes the problem.
3429 Signed-off-by: Stelian Pop <stelian@popies.net>
3431 commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
3432 Author: Guennadi Liakhovetski <lg@denx.de>
3433 Date: Thu May 8 10:09:27 2008 +0200
3435 mx31ads: fix 32kHz clock handling
3437 According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
3438 oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
3439 Also fix a typo when verifying a jumper configuration. While at it, make
3440 two needlessly global functions static.
3442 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3444 commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
3445 Author: Marian Balakowicz <m8@semihalf.com>
3446 Date: Wed May 7 13:10:04 2008 +0200
3448 Avoid initrd and logbuffer area overlaps
3450 Add logbuffer to reserved LMB areas to prevent initrd allocation
3451 from overlaping with it.
3453 Make sure to use correct logbuffer base address.
3455 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3457 commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
3458 Author: Marian Balakowicz <m8@semihalf.com>
3459 Date: Wed May 7 13:08:54 2008 +0200
3461 ppc: Cleanup get_effective_memsize() use
3463 Removed duplicated effective memory size calculation code.
3465 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3467 commit 273c37d843d5b581090378016cd12dd9c586907b
3468 Author: Marian Balakowicz <m8@semihalf.com>
3469 Date: Wed May 7 09:03:53 2008 +0200
3471 Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
3473 Recent modifcations to LOGBUFFER handling code were incorrecly
3474 introduced to fit_check_kernel() routine during
3475 "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
3476 commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
3478 This patch cleans up this merge issue.
3480 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
3482 commit bc11756daff89a3de09ca80adac962b88cf06e6e
3483 Author: Grant Erickson <gerickson@nuovations.com>
3484 Date: Tue May 6 20:16:15 2008 -0700
3486 Propagate Error Status to the Shell on fw_printenv Errors
3488 Changed implementation such that fw_printenv returns failure status
3489 when one or more specified variables do not exist or when incorrect
3490 command syntax is used.
3492 This aids scripting fw_printenv such that the script can key of the
3493 return status rather than relying on standard error "scraping".
3495 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
3496 Signed-off-by: Wolfgang Denk <wd@denx.de>
3498 commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
3499 Author: Grant Erickson <gerickson@nuovations.com>
3500 Date: Tue May 6 16:18:00 2008 -0700
3502 Fix Compilation Errors with 'tools/env/fw_printenv'
3504 In the current top-of-tree, 1.3.3.-rc2, the optional tool
3505 'tools/env/fw_printenv' fails to compile for two reasons:
3507 1) The header watchdog.h cannot be found.
3508 2) The header zlib.h is picked up from the tool chain rather than the
3509 project causing a prototype conflict for crc32.
3511 This patch addresses both of these issues.
3513 Platforms Tested On:
3516 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
3518 commit 597f6c26a18b389903a64692bacbf9a1ca69355b
3519 Author: James Yang <James.Yang@freescale.com>
3520 Date: Mon May 5 10:22:53 2008 -0500
3522 Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
3524 When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
3525 work before relocating to RAM because command history is written into
3526 a global array that is not writable before relocation. This patch
3527 defers to the no-editing and no-history code in readline_into_buffer()
3528 if it is called before relocation.
3530 Signed-off-by: James Yang <James.Yang@freescale.com>
3531 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3533 commit 726c0f1e5f108dccea052965123b95837d2bd402
3534 Author: Detlev Zundel <dzu@denx.de>
3535 Date: Mon May 5 16:11:22 2008 +0200
3537 cosmetic: Adjust coding style for switch statements to be consistent
3539 Signed-off-by: Detlev Zundel <dzu@denx.de>
3541 commit 574b319512b13e10800f0045e39b993f4ca25e42
3542 Author: Detlev Zundel <dzu@denx.de>
3543 Date: Mon May 5 16:11:21 2008 +0200
3545 Fix disk type output in disk/part.c
3547 Signed-off-by: Detlev Zundel <dzu@denx.de>
3549 commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
3550 Author: Vlad Lungu <vlad.lungu@windriver.com>
3551 Date: Mon May 5 14:20:03 2008 +0300
3553 Mail address change, documentation modified
3555 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
3557 commit 4d49b28038e2819088e8356a77212fc95a89ce5a
3558 Author: Michal Simek <monstr@monstr.eu>
3559 Date: Sun May 4 15:42:41 2008 +0200
3561 microblaze: Repare intc handling
3563 Signed-off-by: Michal Simek <monstr@monstr.eu>
3565 commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
3566 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3567 Date: Sun May 4 15:17:52 2008 +0200
3569 include/gitignore: update to all architectures
3571 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3573 commit 1df368aed3b8bc240fe1595d290b0e91b22961da
3574 Author: Marcel Ziswiler <marcel@ziswiler.com>
3575 Date: Mon May 5 02:12:06 2008 +0200
3577 ide: Remove spurious second include of io.h
3579 Removed the second include, with all the #ifdef around as suggested by Wolfgang.
3581 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3583 commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
3584 Author: Adrian Filipi <adrian.filipi@eurotech.com>
3585 Date: Tue May 6 16:46:37 2008 -0400
3589 This patch fixes three typos.
3590 The first is a repetition of CONFIG_CMD_BSP.
3591 The second makes the #endif comment match its #if.
3592 The third is a spelling error.
3594 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
3596 commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
3597 Author: Grant Erickson <gerickson@nuovations.com>
3598 Date: Sun May 4 16:45:01 2008 -0700
3600 Recognize 'powerpc' As an Alias for IH_ARCH_PPC
3602 Add support for the recognition of 'powerpc' as an alias for the PowerPC
3603 architecture type since Linux is already trending in that direction,
3604 preferring 'powerpc' to 'ppc'.
3606 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
3608 commit f5a24259190c388c2527bdc49fee34577d862cc7
3609 Author: Wheatley Travis <Travis.Wheatley@freescale.com>
3610 Date: Fri May 2 13:35:15 2008 -0700
3612 7450 and 86xx L2 cache invalidate bug corrections
3614 The 7610 and related parts have an L2IP bit in the L2CR that is
3615 monitored to signal when the L2 cache invalidate is complete whereas the
3616 7450 and related parts utilize L2I for this purpose. However, the
3617 current code does not account for this difference. Additionally the 86xx
3618 L2 cache invalidate code used an "andi" instruction where an "andis"
3619 instruction should have been used.
3621 This patch addresses both of these bugs.
3623 Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
3624 Acked-By: Jon Loeliger <jdl@freescale.com>
3626 commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
3627 Author: Wolfgang Denk <wd@denx.de>
3628 Date: Fri May 9 10:16:13 2008 +0200
3630 Avoid infinite loop "Generating include/autoconf.mk"
3632 Fix a bogus circular dependency that caused an infinite loop of
3633 "Generating include/autoconf.mk" again and again.
3635 Signed-off-by: Wolfgang Denk <wd@denx.de>
3637 commit 567fb852178dbf59529d7301620a3f3732a4b02d
3638 Author: Stelian Pop <stelian@popies.net>
3639 Date: Thu May 8 22:52:09 2008 +0200
3641 Fix @ -> <at> substitution
3643 When applying the AT91CAP9 patches upstream, something transformed
3644 the '@' character into the ' <at> ' sequence.
3646 The patch below restores the original form in all the places where
3647 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
3648 were copied from AT91CAP9, and a couple of other files where the
3649 ' <at> ' sequence was present).
3651 Signed-off-by: Stelian Pop <stelian@popies.net>
3652 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3654 commit 73ccb3410a0785593cda7aee455dfc51f790e281
3655 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
3656 Date: Mon Apr 28 14:04:32 2008 +0200
3658 ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
3660 Signed-off-by: Gary Jennejohn <garyj@denx.de>
3661 Signed-off-by: Stefan Roese <sr@denx.de>
3663 commit ef2642625cbfb1c3695e3478d08ae515052a4950
3664 Author: Stefan Roese <sr@denx.de>
3665 Date: Thu May 8 11:10:46 2008 +0200
3667 ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
3669 Signed-off-by: Stefan Roese <sr@denx.de>
3671 commit a00eccfebc954ad9485161efeca7d9aaf626d530
3672 Author: Stefan Roese <sr@denx.de>
3673 Date: Thu May 8 11:05:15 2008 +0200
3675 ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
3677 This patch adds fdt (flattened device tree) support to all remaining AMCC
3678 eval boards. Most newer boards already support device tree. With this patch,
3679 all AMCC boards now enable device tree passing from U-Boot to Linux
3680 arch/powerpc kernels.
3682 Signed-off-by: Stefan Roese <sr@denx.de>
3684 commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
3685 Author: Stefan Roese <sr@denx.de>
3686 Date: Thu May 8 11:01:09 2008 +0200
3688 ppc4xx: Add weak default ft_board_setup() routine
3690 This patch adds a default ft_board_setup() routine to the 4xx fdt code.
3691 This routine is defined as weak and can be overwritten by a board specific
3694 Signed-off-by: Stefan Roese <sr@denx.de>
3696 commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
3697 Author: Stefan Roese <sr@denx.de>
3698 Date: Thu May 8 10:48:58 2008 +0200
3700 ppc4xx: acadia: Add fdt support and fix section overlap problem
3702 This patch adds fdt (flattened device tree) support to the AMCC
3703 Acadia eval board. This increases the image size and it doesn't
3704 fit anymore into 256kByte. Since we didn't want to remove features
3705 from the configuration, we decided to increase the U-Boot image size
3706 (add one flash sector).
3708 Also changed the default environment definition to make it
3709 independent of such changes.
3711 Signed-off-by: Stefan Roese <sr@denx.de>
3713 commit 4adb3023de75bc150f088c8935db340930ad38c8
3714 Author: Ira Snyder <iws@ovro.caltech.edu>
3715 Date: Tue Apr 29 11:18:54 2008 -0700
3717 ppc4xx: Add device tree support to AMCC Yosemite
3719 Add support for booting with a device tree blob. This is needed to boot
3720 ARCH=powerpc kernels. Also add support for setting the eth0 mac address
3721 via the ethaddr variable.
3723 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
3724 Signed-off-by: Stefan Roese <sr@denx.de>
3726 commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
3727 Author: Dave Mitchell <dmitchell@amcc.com>
3728 Date: Wed May 7 09:00:23 2008 -0700
3730 ppc4xx: Fix typos in 460GT/EX FBDV array
3732 Corrected two typos in the 460GT/EX FBDV array.
3734 Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
3735 Signed-off-by: Stefan Roese <sr@denx.de>
3737 commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
3738 Author: Andy Fleming <afleming@freescale.com>
3739 Date: Wed May 7 16:54:31 2008 -0500
3741 85xx: Limit CPU2 workaround to parts that have the errata
3743 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
3744 Signed-off-by: Andy Fleming <afleming@freescale.com>
3746 commit a5fe514e8ace564300d2c1d73846ddff49654243
3747 Author: Lee Nipper <lee.nipper@freescale.com>
3748 Date: Fri Apr 25 15:44:45 2008 -0500
3750 mpc83xx: system performance settings for MPC8349EMDS.
3752 These same settings are used on MPC8349ITX, and
3753 improve performance on MPC8349EMDS.
3755 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
3756 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3758 commit 49387dba910e485640b575e920ee463b7e611dc3
3759 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
3760 Date: Tue May 6 13:22:52 2008 +0900
3762 [MIPS] cpu/mips/cache.S: Fix build warning
3764 Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
3765 warns illegal global symbol references by bal (and jal also) instruction.
3766 This does not happen with the latest binutils v2.18.
3768 Here's an example on gth2_config:
3770 mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
3771 stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
3772 c -EB -c -o cache.o cache.S
3773 cache.S: Assembler messages:
3774 cache.S:243: Warning: Pretending global symbol used as branch target is local.
3775 cache.S:250: Warning: Pretending global symbol used as branch target is local.
3777 In principle, gas might be sensitive to global symbol references in PIC
3778 code because they should be processed through GOT (global offset table).
3779 But if `bal' instruction is used, it results in PC-based offset jump.
3780 This is the cause of this warning.
3782 In practice, we know it doesn't matter whether PC-based reference or GOT-
3783 based. As for this case, both will work before/after relocation. But let's
3786 This patch explicitly sets up a target address, then jump there.
3787 Here's an example of disassembled code with/without this patch.
3789 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
3790 9000066c: ac80fffc sw zero,-4(a0)
3791 90000670: 01402821 move a1,t2
3792 -90000674: 0411ffba bal 90000560 <mips_init_icache>
3793 -90000678: 01803021 move a2,t4
3794 -9000067c: 01602821 move a1,t3
3795 -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
3796 -90000684: 01a03021 move a2,t5
3797 -90000688: 03000008 jr t8
3798 -9000068c: 00000000 nop
3799 +90000674: 01803021 move a2,t4
3800 +90000678: 8f8f83ec lw t7,-31764(gp)
3801 +9000067c: 01e0f809 jalr t7
3802 +90000680: 00000000 nop
3803 +90000684: 01602821 move a1,t3
3804 +90000688: 01a03021 move a2,t5
3805 +9000068c: 8f8f81e0 lw t7,-32288(gp)
3806 +90000690: 01e0f809 jalr t7
3807 +90000694: 00000000 nop
3808 +90000698: 03000008 jr t8
3809 +9000069c: 00000000 nop
3811 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
3813 commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
3814 Author: Vlad Lungu <vlad.lungu@windriver.com>
3815 Date: Mon May 5 14:04:00 2008 +0300
3817 Allow building mips versions with ELDK 3.1.1
3819 .gpword works only with local symbols on certain binutils versions
3821 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
3823 commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
3824 Author: Wolfgang Denk <wd@denx.de>
3825 Date: Mon May 5 12:52:36 2008 +0200
3827 MAKEALL: add inka4x0 board
3829 Signed-off-by: Wolfgang Denk <wd@denx.de>
3831 commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
3832 Author: Wolfgang Denk <wd@denx.de>
3833 Date: Sun May 4 21:34:23 2008 +0200
3835 kb9202 board: fix build problem.
3837 Signed-off-by: Wolfgang Denk <wd@denx.de>
3839 commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
3840 Author: Wolfgang Denk <wd@denx.de>
3841 Date: Sun May 4 12:10:33 2008 +0200
3843 Prepare for v1.3.3-rc3
3845 Update ChNAGELOG, minor white space cleanup.
3847 Signed-off-by: Wolfgang Denk <wd@denx.de>
3849 commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
3850 Author: Wolfgang Denk <wd@denx.de>
3851 Date: Sun May 4 00:35:15 2008 +0200
3853 drivers/net/tsec.c: Fix typo.
3855 Signed-off-by: Wolfgang Denk <wd@denx.de>
3857 commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
3858 Author: Mike Frysinger <vapier@gentoo.org>
3859 Date: Fri May 2 21:45:12 2008 -0400
3861 version_autogenerated.h: use printf rather than echo -n
3863 Some systems are dumb and do not implement the -n flag to echo (like OS X).
3864 Convert the Makefile to use printf as this should work everywhere.
3866 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3867 Signed-off-by: Wolfgang Denk <wd@denx.de>
3869 commit 4acc2a108ad0a669165924704a6cb083f9138242
3870 Author: Mike Frysinger <vapier@gentoo.org>
3871 Date: Fri May 2 18:17:50 2008 -0400
3873 fix building when saveenv is disabled in some setups
3875 If you enable environment in the flash, but disable the embedded
3876 option, and you disable the saveenv command, then the #if nested
3877 logic will trigger a compile failure:
3878 env_flash.c: In function 'env_relocate_spec':
3879 env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
3880 The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
3882 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3884 commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
3885 Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
3886 Date: Fri May 2 16:10:04 2008 -0400
3888 SBC8548: fix address mask to allow 64M flash
3890 Fix incorrect mask to enable all 64MB of onboard flash.
3891 Previously U-Boot incorrectly mapped only 8MB of flash, this
3892 patch correctly maps all the available flash.
3894 Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
3896 commit 3648085c464c8c22ef76fab006ca4344d3796124
3897 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3898 Date: Fri May 2 19:48:56 2008 +0200
3900 qemu_mips: add README
3902 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3904 commit 6fdd002689190a0022c7b3dbab37fcba724580ce
3905 Author: Marcel Ziswiler <marcel@ziswiler.com>
3906 Date: Fri May 2 02:35:59 2008 +0200
3908 Fix misspelled comment
3910 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3912 commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
3913 Author: Mike Frysinger <vapier@gentoo.org>
3914 Date: Thu May 1 04:13:05 2008 -0400
3916 mkimage: make mmap() checks consistent
3918 The mmap() related code is full of inconsistent casts/constants when
3919 it comes to error checking, and may break when building on some
3920 systems (like ones that do not implicitly define the caddr_t type).
3921 Let's just avoid the whole mess by writing the code nice and clean in
3924 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3926 commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
3927 Author: Marcel Ziswiler <marcel@ziswiler.com>
3928 Date: Thu May 1 09:05:34 2008 +0200
3930 Fix defined but not used build warning
3932 - warning: 'srom' defined but not used
3934 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3936 commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
3937 Author: Marcel Ziswiler <marcel@ziswiler.com>
3938 Date: Thu May 1 09:05:26 2008 +0200
3940 Fix implicit declaration build warnings
3942 - warning: implicit declaration of function ‘serial_initialize’
3944 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3946 commit 9acde129cc3f9c1b3bc11a821480dd446774d618
3947 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
3948 Date: Tue Apr 29 19:18:32 2008 +0200
3950 TSEC: add config options for VSC8601 RGMII PHY
3952 The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
3953 and Tx clock lines. They are configured using 2 bits in extended
3955 Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
3956 been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
3958 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
3959 Acked-by: Andy Fleming <afleming@freescale.com>
3960 Acked-by: Ben Warren <biggerbadderben@gmail.com>
3963 drivers/net/tsec.c | 6 ++++++
3964 drivers/net/tsec.h | 3 +++
3965 2 files changed, 9 insertions(+), 0 deletions(-)
3967 commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
3968 Author: Wolfgang Denk <wd@denx.de>
3969 Date: Sat May 3 23:07:15 2008 +0200
3971 Revert "ColdFire: Get information from the correct GCC"
3973 This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
3974 (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
3976 commit c4e5f52a58d278eebb87f476e353972c5dacea40
3977 Author: Wolfgang Denk <wd@denx.de>
3978 Date: Sat May 3 22:25:00 2008 +0200
3980 config.mk: use correct (cross) compiler
3982 Some config.mk files reference $(CC) to test for specific tool chain
3983 features, so make sure $(CC) gets set before including any such
3986 This patch replaces commit b7166e05a5 ("ColdFire: Get information from
3989 Signed-off-by: Wolfgang Denk <wd@denx.de>
3991 commit 27c38689d0cfde0e444239345f97b5eecc9f4067
3992 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3993 Date: Thu May 1 02:13:44 2008 +0200
3995 pxa: fix previous definition on cpu init
3997 start.S:183:1: warning: "ICMR" redefined
3998 In file included from start.S:33:
3999 include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
4000 start.S:187:1: warning: "RCSR" redefined
4003 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4005 commit 6d12e697de794d700767f22f950e3026ccf4daf6
4006 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4007 Date: Thu May 1 02:13:43 2008 +0200
4009 pxa: fix pcmcia operation on 'i' may be undefined
4011 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4012 Signed-off-by: Wolfgang Denk <wd@denx.de>
4014 commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
4015 Author: Kumar Gala <galak@kernel.crashing.org>
4016 Date: Wed Apr 30 16:24:35 2008 -0500
4018 MPC8610HPCD: Drop -O2 from the build flags
4020 Make the flags use -Os like all other boards
4022 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4024 commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
4025 Author: Stefan Roese <sr@denx.de>
4026 Date: Wed Apr 30 15:50:39 2008 +0200
4028 RTC: Fix month offset by one problem in M41T62 RTC driver
4030 This patch fixes a problem with the month being read and written
4031 incorrectly (offset by one). This only gets visible by also using
4032 the Linux driver (rtc-m41t80).
4034 Tested on AMCC Canyonlands.
4036 Signed-off-by: Stefan Roese <sr@denx.de>
4038 commit 141ba1cad8e6598a2466e7e2976c6a12285df619
4039 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4040 Date: Sat May 3 13:51:44 2008 +0900
4042 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
4044 Current trick to pick up GNU assembler minor version uses a dot(.) as a
4045 delimiter, and take the second field to obtain minor version number. But
4046 as can be expected, this doesn't work with a version string which has
4047 dots more than needs.
4051 $ mips-linux-gnu-as --version | grep 'GNU assembler'
4052 GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
4053 $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
4057 This patch restricts the version format to 2.XX.XX... This will work
4060 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
4062 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
4066 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4068 commit ea638951acead7f1086c908c0b9f086beab82a22
4069 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4070 Date: Sat May 3 13:51:28 2008 +0900
4072 [MIPS] cpu/mips/cache.S: Add dcache_enable
4074 Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
4075 "allow ports to override bootelf behavior") requires ports to have this
4078 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4079 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4081 commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
4082 Author: Wolfgang Denk <wd@denx.de>
4083 Date: Thu May 1 21:30:16 2008 +0200
4085 onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
4087 Onenand needs a version of memcpy() which performs 16 bit accesses
4088 only; make sure the name does not conflict with the standard
4091 Signed-off-by: Wolfgang Denk <wd@denx.de>
4093 commit 12bc4e94251c369c529ffa505cf58b148c372f7f
4094 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4095 Date: Wed Apr 30 22:38:17 2008 +0200
4097 cmd_nand: fix warning: str2long ncompatible pointer type
4099 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4101 commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
4102 Author: Timur Tabi <timur@freescale.com>
4103 Date: Fri Apr 4 11:16:11 2008 -0500
4105 Fix calculation of I2C clock for some 86xx chips
4107 Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
4108 There is no pattern that can be used to determine which chips use which
4109 frequency, so the only way to determine is to look up the actual SOC
4110 designation and use the right value for that SOC.
4112 Signed-off-by: Timur Tabi <timur@freescale.com>
4114 commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
4115 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4116 Date: Wed Apr 30 12:11:19 2008 -0500
4118 ColdFire: Fix ethernet hang issue for mcf547x_8x
4120 The ethernet hang is caused by receiving buffer in DRAM is not
4121 yet ready due to access cycles require longer time in DRAM.
4122 Relocate DMA buffer descriptors from DRAM to internal SRAM.
4124 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4126 commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
4127 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4128 Date: Wed Apr 30 12:10:47 2008 -0500
4130 ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
4132 Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
4133 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4135 commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
4136 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4137 Date: Wed Apr 30 12:10:23 2008 -0500
4139 ColdFire: Get information from the correct GCC
4141 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
4142 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4144 commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
4145 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
4146 Date: Wed Apr 30 18:02:59 2008 +0200
4148 Fix warning in env_nand.c if compiled for DaVinci Schmoogie
4152 nv_nand.c: In function 'saveenv':
4153 env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
4154 env_nand.c: In function 'env_relocate_spec':
4155 env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
4157 if compiled for davinci_schmoogie_config.
4159 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
4160 Ack by: Sergey Kubushyn <ksi@koi8.net>
4162 commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
4163 Author: Anatolij Gustschin <agust@denx.de>
4164 Date: Wed Apr 30 13:34:40 2008 +0200
4166 Fix warnings while compiling net/net.c for MPC8610HPCD board
4168 MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
4169 causing overriding default -Os option. New gcc (ver. 4.2.2)
4170 produces warnings while compiling net/net.c file with -O2
4171 option. The patch is an attempt to fix this.
4173 Signed-off-by: Anatolij Gustschin <agust@denx.de>
4175 commit 58b575e575c25fdf8c88141e145db201f3092149
4176 Author: Sascha Laue <Sascha.Laue@gmx.biz>
4177 Date: Wed Apr 30 15:23:38 2008 +0200
4179 lwmon5: fix offset error in sysmon0 POST
4181 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
4182 Signed-off-by: Wolfgang Denk <wd@denx.de>
4184 commit e7419b243a373de4ee042f7d4f45f66de787240d
4185 Author: Sascha Laue <Sascha.Laue@gmx.biz>
4186 Date: Wed Apr 30 15:16:35 2008 +0200
4188 lwmon5: fix manual merge error in POST
4190 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
4192 commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
4193 Author: Wolfgang Denk <wd@denx.de>
4194 Date: Wed Apr 30 17:46:26 2008 +0200
4196 cmd_nand.c: fix another 'incompatible pointer type' warning.
4198 Signed-off-by: Wolfgang Denk <wd@denx.de>
4200 commit de109d909707e2dfe806be5efc3cdb103b47c8ad
4201 Author: Wolfgang Denk <wd@denx.de>
4202 Date: Wed Apr 30 17:25:07 2008 +0200
4204 Makefile: fix parallel builds
4206 This problem shows up with parallel builds only; it results in
4207 somewhat cryptic error messages like
4209 $ JOBS=-j6 MAKEALL netstar
4210 Configuring for netstar board...
4211 arm-linux-ld: cannot find -lgeneric
4212 make[1]: *** [eeprom.srec] Error 1
4214 A few boards (like netstar and voiceblue) need some libraries for
4215 building; however, the board Makefile does not contain any such
4216 dependencies which may cause problems with parallel builds. Adding
4217 such dependencies is difficult as we would also have to provide build
4218 rules, which already exist in the respective library Makefiles.
4220 To solve this, we make sure that all libraries get built before the
4223 Signed-off-by: Wolfgang Denk <wd@denx.de>
4225 commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
4226 Author: Stefan Roese <sr@denx.de>
4227 Date: Wed Apr 30 14:51:36 2008 +0200
4229 ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
4231 This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
4232 used for NAND booting to match the values needed for the new 512MB
4233 DIMM modules shipped with the productions boards:
4235 Crucial: CT6464AC667.8FB
4237 Signed-off-by: Stefan Roese <sr@denx.de>
4239 commit ea9202a659dc75996facf1475f1866a19a9d3129
4240 Author: Stefan Roese <sr@denx.de>
4241 Date: Wed Apr 30 10:49:43 2008 +0200
4243 ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
4245 This patch fixes a problem with DIMMs that have 8 banks. Now the
4246 MCIF0_MBxCF register will be setup correctly for this setup too.
4248 This was noticed with the 512MB DIMM on Canyonlands/Glacier.
4250 Signed-off-by: Stefan Roese <sr@denx.de>
4252 commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
4253 Author: Wolfgang Denk <wd@denx.de>
4254 Date: Tue Apr 29 23:41:06 2008 +0200
4256 Prepare v1.3.3-rc2, again.
4258 Signed-off-by: Wolfgang Denk <wd@denx.de>
4260 commit b7fcc4c13993782342cf5cd20d237a6281648a0b
4261 Author: Wolfgang Denk <wd@denx.de>
4262 Date: Tue Apr 29 23:35:24 2008 +0200
4266 Signed-off-by: Wolfgang Denk <wd@denx.de>
4268 commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
4269 Author: Wolfgang Denk <wd@denx.de>
4270 Date: Tue Apr 29 23:32:20 2008 +0200
4272 common/env_nand.c: fix one more incompatible pointer type issue
4274 Signed-off-by: Wolfgang Denk <wd@denx.de>
4276 commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
4277 Author: Wolfgang Denk <wd@denx.de>
4278 Date: Tue Apr 29 21:33:08 2008 +0200
4280 post/board/lwmon5/sysmon.c: fix manual merge error.
4282 Signed-off-by: Wolfgang Denk <wd@denx.de>
4284 commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
4285 Author: Kumar Gala <galak@kernel.crashing.org>
4286 Date: Tue Apr 29 12:54:59 2008 -0500
4288 85xx: Add -mno-spe to e500/85xx builds
4290 Newer gcc's might be configured to enable autovectorization by default.
4291 If we happen to build with one of those compilers we will get SPE
4292 instructions in random code.
4294 -mno-spe disables the compiler for automatically generating SPE
4295 instructions without our knowledge.
4297 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4299 commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
4300 Author: Kumar Gala <galak@kernel.crashing.org>
4301 Date: Tue Apr 29 10:18:34 2008 -0500
4303 Update .gitignore for zlib.h
4305 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4307 commit 45239cf4152109caa925145ccd433529902df887
4308 Author: Kumar Gala <galak@kernel.crashing.org>
4309 Date: Tue Apr 29 10:27:08 2008 -0500
4311 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
4313 All the 85xx and 86xx UM describe the register as timing_cfg_3
4316 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4318 commit ef7d30b14394e4c4a153118f5845760cadada02a
4319 Author: Kumar Gala <galak@kernel.crashing.org>
4320 Date: Tue Apr 29 10:28:34 2008 -0500
4322 85xx/86xx: Rename DDR init address and init extended address register
4324 Rename init_addr and init_ext_addr to match the docs between
4325 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
4327 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4329 commit cf6cc014270549684873a5972d2595052c468cb6
4330 Author: Kumar Gala <galak@kernel.crashing.org>
4331 Date: Mon Apr 28 02:24:04 2008 -0500
4333 85xx: Additional fixes and cleanup of MP code
4335 * adjust __spin_table alignment to match ePAPR v0.94 spec
4336 * loop over all cpus when determing who is up. This fixes an issue if
4337 the "boot cpu" isn't core0. The "boot cpu" will already be in the
4338 cpu_up_mask so there is no harm
4339 * Added some protection in the code to ensure proper behavior. These
4340 changes are explicitly needed but don't hurt:
4341 - Added eieio to ensure the "hot word" of the table is written after
4342 all other table updates have occurred.
4343 - Added isync to ensure we don't prefetch loading of table entries
4346 These issues we raised by Dave Liu.
4348 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4350 commit b2d527a8b9fb50afccbaf79b5540952585cdc760
4351 Author: Yuri Tikhonov <yur@emcraft.com>
4352 Date: Tue Apr 29 15:06:41 2008 +0200
4354 lwmon5: minor clean-up to include/configs/lwmon5.h
4356 LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
4357 the CFG_DSPIC_TEST_ADDR definition more readable.
4359 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4361 commit f4c4d21a885ccc222fd0acdf653b683249e85117
4362 Author: Stefan Roese <sr@denx.de>
4363 Date: Tue Apr 29 16:08:05 2008 +0200
4365 ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
4367 Signed-off-by: Stefan Roese <sr@denx.de>
4369 commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
4370 Author: Yuri Tikhonov <yur@emcraft.com>
4371 Date: Tue Apr 29 13:32:45 2008 +0200
4373 ppc flush_cache: add watch-dog triggering into the loops.
4375 Some boards (e.g. lwmon5) need rather a frequent watch-dog
4376 kicking. Since the time it takes for the flush_cache() function
4377 to complete its job depends on the size of data being flushed, one
4378 may encounter watch-dog resets on such boards when, for example,
4379 download big files over ethernet.
4381 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4383 commit cab99d6f3281ab6784feccf98b9b425daa58418a
4384 Author: Stefan Roese <sr@denx.de>
4385 Date: Tue Apr 29 14:44:54 2008 +0200
4387 ppc4xx: Fix compilation warning in denali_spd_ddr2.c
4389 Signed-off-by: Stefan Roese <sr@denx.de>
4391 commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
4392 Author: Stefan Roese <sr@denx.de>
4393 Date: Tue Apr 29 14:12:07 2008 +0200
4395 ppc4xx: Fix Katmai CFG_MONITOR_LEN
4397 Signed-off-by: Stefan Roese <sr@denx.de>
4399 commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
4400 Author: Stefan Roese <sr@denx.de>
4401 Date: Tue Apr 29 13:57:07 2008 +0200
4403 ppc4xx: Complete remove bogus dflush()
4405 Since the current dflush() implementation is know to have some problems
4406 (as seem on lwmon5 ECC init) this patch removes it completely and replaces
4407 it by using clean_dcache_range().
4409 Tested on Katmai with ECC DIMM.
4411 Signed-off-by: Stefan Roese <sr@denx.de>
4413 commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
4414 Author: Stefan Roese <sr@denx.de>
4415 Date: Tue Apr 29 13:36:51 2008 +0200
4417 ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
4419 As it seems the "old" ECC initialization routine by using dflush() didn't
4420 write all lines in the dcache back to memory on lwmon5. This could lead
4421 to ECC error upon Linux booting. This patch changes the program_ecc()
4422 routine to now use clean_dcache_range() instead of dflush().
4423 clean_dcache_range() uses dcbst which is exactly what we want in this
4426 Since dflush() is known is cause problems, this routine will be
4427 removed completely and replaced by clean_dcache_range() with an
4430 Signed-off-by: Stefan Roese <sr@denx.de>
4432 commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
4433 Author: Yuri Tikhonov <yur@emcraft.com>
4434 Date: Mon Apr 28 18:19:34 2008 +0200
4436 POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
4438 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4440 commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
4441 Author: Markus Brunner <super.firetwister@googlemail.com>
4442 Date: Mon Apr 28 08:47:47 2008 +0200
4444 ppc4xx: Fixup ebc clock in FDT for 405GP/EP
4446 On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
4447 and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
4450 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
4452 commit 2ef7503a593c77a80c2a054011970227c4b62774
4453 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4454 Date: Thu Apr 24 07:57:17 2008 +0200
4456 NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
4458 Move non-inlied functions into specific drivers file
4459 Set get_prom as weak
4461 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4462 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
4463 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4465 commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
4466 Author: Guennadi Liakhovetski <lg@denx.de>
4467 Date: Thu Apr 3 17:04:19 2008 +0200
4469 net: make ARP timeout configurable
4471 Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
4472 On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
4473 to the boards get lost, which typically are ARP replies. By configuring
4474 the timeout to a lower value we significantly improve the first network
4475 transfer time on this board. The timeout is specified in milliseconds,
4476 later internally it is converted to deciseconds, because it has to be
4477 converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
4480 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4481 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4483 commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
4484 Author: Guennadi Liakhovetski <lg@denx.de>
4485 Date: Thu Apr 3 13:36:18 2008 +0200
4487 minor cs8900 driver clean up
4489 Remove a redundant register definition, clean up some coding style
4492 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4493 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4495 commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
4496 Author: Wolfgang Denk <wd@denx.de>
4497 Date: Mon Apr 28 22:01:04 2008 +0200
4499 jffs2_1pass.c: fix incompatible pointer type warning
4501 Signed-off-by: Wolfgang Denk <wd@denx.de>
4503 commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
4504 Author: Sascha Laue <Sascha.Laue@gmx.biz>
4505 Date: Tue Apr 1 10:10:18 2008 +0200
4507 lwmon5: update dsPIC POST spezification
4509 The specification for the lwmon5 board dsPIC POST got changed.
4510 Also add defines for the temperatures and voltages.
4512 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
4514 commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
4515 Author: Sascha Laue <Sascha.Laue@gmx.biz>
4516 Date: Tue Apr 1 15:13:03 2008 +0200
4518 Fix watchdog POST for lwmon5
4520 If the hardware watchdog detects a voltage error, the watchdog sets
4521 GPIO62 to low. The watchdog POST has to detect this low level.
4523 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
4524 Signed-off-by: Wolfgang Denk <wd@denx.de>
4526 commit dd5748bcd669f46aeb6686c1b341323843738ccc
4527 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
4528 Date: Mon Apr 28 14:37:14 2008 +0200
4530 rtl8169: fix compiler warnings
4532 Fix multiple compiler warnings related to argument type mismatch.
4534 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
4536 commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
4537 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
4538 Date: Mon Apr 28 14:36:06 2008 +0200
4540 IDE: fix compiler warnings
4542 The IDE driver can use 32-bit addresses in LBA mode, in which case it
4543 spits multiple warnings during compilation. Fix them.
4545 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
4547 commit db9084de28c46ac81c8f681722cb0d7411be4d7f
4548 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
4549 Date: Mon Apr 28 14:35:57 2008 +0200
4551 LinkStation: fix compiler warning, add a maintainer
4553 out_8 wants a pointer to an unsigned as the first argument. Add a
4554 maintainer for Linkstation boards.
4556 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
4558 commit c71abba3cb67b063f789f17abf6c7447727c0cd5
4559 Author: Wolfgang Denk <wd@denx.de>
4560 Date: Mon Apr 28 14:55:12 2008 +0200
4562 cmd_nand.c: fix "differ in signedness" problem
4564 Signed-off-by: Wolfgang Denk <wd@denx.de>
4566 commit f2c288a35341ad02ac03b1563d786763c9c8f159
4567 Author: Wolfgang Denk <wd@denx.de>
4568 Date: Mon Apr 28 12:48:47 2008 +0200
4570 pcnet.c: fix a merge issue
4572 Signed-off-by: Wolfgang Denk <wd@denx.de>
4574 commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
4575 Author: Wolfgang Denk <wd@denx.de>
4576 Date: Mon Apr 28 12:08:18 2008 +0200
4578 NAND: fix some strict-aliasing compiler warnings
4580 Signed-off-by: Wolfgang Denk <wd@denx.de>
4582 commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
4583 Author: Stefan Roese <sr@denx.de>
4584 Date: Mon Apr 28 11:37:14 2008 +0200
4586 ppc4xx: Fix compile warning of hcu4 board
4588 Signed-off-by: Stefan Roese <sr@denx.de>
4590 commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
4591 Author: Wolfgang Denk <wd@denx.de>
4592 Date: Mon Apr 28 11:31:23 2008 +0200
4594 MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
4596 Signed-off-by: Wolfgang Denk <wd@denx.de>
4598 commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
4599 Author: Guennadi Liakhovetski <lg@denx.de>
4600 Date: Mon Apr 28 00:25:32 2008 +0200
4602 mx31ads: fix loadaddr environment variable define
4604 Arithmetic expressions do not get evaluated under stringification. Remove
4605 default network configuration, add DHCP command support. Thanks to Felix
4606 Radensky for reporting.
4608 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4610 commit 144eec777ac07bcb12bd38245a5a289f694a7f98
4611 Author: Wolfgang Denk <wd@denx.de>
4612 Date: Mon Apr 28 10:55:24 2008 +0200
4614 katmai: fix section overlap problem
4616 Since we didn't want to remove features from the configuration, we
4617 decided to increase the U-Boot image size (add one flash sector).
4619 Also changed the default environment definition to make it
4620 independent of such changes.
4622 Signed-off-by: Wolfgang Denk <wd@denx.de>
4623 Acked-by: Stefan Roese <sr@denx.de>
4625 commit 941d696d25624e3cc65ebf924199541acf52d74e
4626 Author: Wolfgang Denk <wd@denx.de>
4627 Date: Mon Apr 28 10:55:24 2008 +0200
4629 katmai: fix section overlap problem
4631 Since we didn't want to remove features from the configuration, we
4632 decided to increase the U-Boot image size (add one flash sector).
4634 Also changed the default environment definition to make it
4635 independent of such changes.
4637 Signed-off-by: Wolfgang Denk <wd@denx.de>
4638 Acked-by: Stefan Roese <sr@denx.de>
4640 commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
4641 Author: Kumar Gala <galak@kernel.crashing.org>
4642 Date: Sat Apr 26 11:44:44 2008 -0500
4644 post: Fix building with O=
4646 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4648 commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
4649 Author: Wolfgang Denk <wd@denx.de>
4650 Date: Sat Apr 26 01:55:00 2008 +0200
4654 Signed-off-by: Wolfgang Denk <wd@denx.de>
4656 commit 19cf2ec90d8ce52da60c1693693c4048cb810967
4657 Author: Wolfgang Denk <wd@denx.de>
4658 Date: Sat Apr 26 01:25:39 2008 +0200
4660 post/Makefile: make sure to use the correct flags
4662 ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
4663 messages to be printed.
4665 Signed-off-by: Wolfgang Denk <wd@denx.de>
4667 commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
4668 Author: Wolfgang Denk <wd@denx.de>
4669 Date: Sat Apr 26 00:34:42 2008 +0200
4671 Coding Style cleanup, update CHANGELOG
4673 Signed-off-by: Wolfgang Denk <wd@denx.de>
4675 commit f9204e15173834ff8d123e36279ce49c3c6c74fc
4676 Author: Magnus Lilja <lilja.magnus@gmail.com>
4677 Date: Sun Apr 20 10:38:12 2008 +0200
4679 i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
4681 This patch enables SPI and MC13783/RTC support for the Litekit board.
4683 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
4685 commit f97abbfb47d9e407354e157cae3f6369e460cd37
4686 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4687 Date: Fri Apr 25 01:08:32 2008 -0500
4689 MPC8544DS: decode pcie3 end-point configuration correctly.
4691 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4692 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4694 commit 292188e15523c165c4269403fdcd33c26d89176e
4695 Author: Roy Zang <tie-fei.zang@freescale.com>
4696 Date: Fri Apr 25 00:55:09 2008 -0500
4698 MPC8544DS: Removes the unknown flash message information
4700 This patch removes the unknown flash message information:
4701 '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
4702 This unknown flash message is caused by PromJet.
4703 Some of the board user is unhappy with this information.
4705 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4706 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4708 commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
4709 Author: Kim Phillips <kim.phillips@freescale.com>
4710 Date: Thu Apr 24 14:07:38 2008 -0500
4712 mpc83xx: bump loadaddr over fdtaddr to 0x500000
4714 this seems as a good compromise between human memory, typing,
4715 and last but not least, to accommodate for current and future kernel bloat.
4717 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4718 Acked-by: Dave Liu <daveliu@freescale.com>
4720 commit be5a7190265a34d968578ff266549c60f6f57654
4721 Author: Dave Liu <r63238@freescale.com>
4722 Date: Tue Apr 15 13:12:23 2008 +0800
4724 mpc83xx: clean up the readme for 83xx boards
4727 2. correct the memory map for 837xerdb board
4729 Signed-off-by: Dave Liu <daveliu@freescale.com>
4731 commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
4732 Author: Dave Liu <r63238@freescale.com>
4733 Date: Tue Apr 15 13:11:11 2008 +0800
4735 mpc83xx: remove the unused CPM's stuff
4737 The MPC83xx family never have CPM block, so remove it from 83xx.
4739 Signed-off-by: Dave Liu <daveliu@freescale.com>
4741 commit c63ad6325a8ac0097a54b418a3288926b0484b18
4742 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4743 Date: Fri Apr 18 16:29:40 2008 +0200
4745 cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
4747 This patch adds a configurable flash auto protection list that can be used
4748 to make U-Boot protect flash regions in flash_init().
4750 The idea has been discussed on the u-boot mailing list starting
4753 Even this patch brings a new feature it is used as a bugfix for 4xx
4754 platforms where flash_init() does not completely protect the
4755 monitor's flash range in all situations.
4757 U-Boot protects the flash range from CFG_MONITOR_BASE to
4758 (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
4759 include the reset vector at 0xfffffffc.
4762 #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
4764 This config option will auto protect the last 512k of flash that
4765 contains the bootloader on board like APC405 and PMC405.
4767 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4769 commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
4770 Author: Stefan Roese <sr@denx.de>
4771 Date: Fri Apr 25 13:59:03 2008 +0200
4773 ppc4xx: Remove double defines in lwmon5.h
4775 introduced with latest lwmon5/POST merge
4777 Signed-off-by: Stefan Roese <sr@denx.de>
4779 commit 7590378fb9c686709492ceb142825cd058255956
4780 Author: Bartlomiej Sieka <tur@semihalf.com>
4781 Date: Fri Apr 25 13:54:02 2008 +0200
4783 Use watchdog-aware functions when calculating hashes of images - take two
4785 Some files didn't get updated properly with the "Use watchdog-aware
4786 functions when calculating hashes of images" commit, this commit
4789 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4790 Signed-off-by: Wolfgang Denk <wd@denx.de>
4792 commit 8e048c438e20ec89b49da5f085f8f756eba6e587
4793 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4794 Date: Fri Apr 25 12:01:39 2008 +0200
4796 ppc4xx: Add bootcount limit handling for APC405 boards
4798 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
4800 commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
4801 Author: Bartlomiej Sieka <tur@semihalf.com>
4802 Date: Fri Apr 25 12:10:09 2008 +0200
4804 Use watchdog-aware functions when calculating hashes of images
4806 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4808 commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
4809 Author: Wolfgang Denk <wd@denx.de>
4810 Date: Fri Apr 25 12:44:08 2008 +0200
4812 USB: fix more GCC 4.2.x aliasing warnings
4814 Signed-off-by: Wolfgang Denk <wd@denx.de>
4815 Acked-by: Markus Klotzbuecher <mk@denx.de>
4817 commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
4818 Author: Wolfgang Denk <wd@denx.de>
4819 Date: Fri Apr 25 12:41:53 2008 +0200
4821 lib_generic/crc32.c: add missing #include <watchdog.h>
4823 Signed-off-by: Wolfgang Denk <wd@denx.de>
4825 commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
4826 Author: Wolfgang Denk <wd@denx.de>
4827 Date: Fri Apr 25 11:52:21 2008 +0200
4829 lib_generic/crc32.c: fix compile problem
4831 Signed-off-by: Wolfgang Denk <wd@denx.de>
4833 commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
4834 Author: Stefan Roese <sr@denx.de>
4835 Date: Tue Apr 22 12:20:32 2008 +0200
4837 ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
4839 The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
4840 environment variable will now get passed to the Linux kernel by setting
4841 the device_type property of the PCIe device tree node. For normal root-
4842 complex configuration it will keep its defaults value of "pci" and for
4843 endpoint configuration it will get changed to "pci-endpoint".
4845 Signed-off-by: Stefan Roese <sr@denx.de>
4847 commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
4848 Author: Yuri Tikhonov <yur@emcraft.com>
4849 Date: Thu Apr 24 10:30:53 2008 +0200
4851 lwmon5: watchdog POST fix
4853 Use the GPT0_MASKx registers as the temporary storage for watch-dog
4854 timer POST test instead of GPT0_COMPx. The latter
4855 (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
4857 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
4858 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
4860 commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
4861 Author: Kim Phillips <kim.phillips@freescale.com>
4862 Date: Mon Apr 21 18:10:14 2008 -0500
4864 lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
4866 This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
4867 proven problematic getting right from the start at least on 83xx and
4870 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4872 commit a99715b8ebfc500f3f40e01b36b64d473938443d
4873 Author: Detlev Zundel <dzu@denx.de>
4874 Date: Fri Apr 18 14:50:01 2008 +0200
4876 Realining some header definitions.
4878 Signed-off-by: Detlev Zundel <dzu@denx.de>
4880 commit 4acbc6c7f993cae409c424615415a3e76820f13d
4881 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4882 Date: Thu Apr 24 07:57:16 2008 +0200
4884 NE2000: coding style cleanup
4886 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4888 commit b4aff1ffaf7120032c653357c007faa14f74d29d
4889 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4890 Date: Wed Apr 23 00:11:47 2008 +0900
4892 qemu-mips.h: Add CFI support
4894 CONFIG_ENV_OVERWRITE is also added.
4896 This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
4898 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4899 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4901 commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
4902 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4903 Date: Tue Apr 22 22:47:27 2008 +0900
4905 doc/README.mips: Add MIPS notes
4907 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4909 commit 215b01bba8bc662d35f72b084700b192d367dfb4
4910 Author: Bartlomiej Sieka <tur@semihalf.com>
4911 Date: Tue Apr 22 12:27:56 2008 +0200
4913 Add support for calculating hashes with watchdog triggering
4915 Implement watchodg-aware variants of hash calculation functions:
4919 The above functions calculate the hash of the input buffer in chunks,
4920 triggering the watchdog after processing each chunk. The chunk size
4921 is given as a function call parameter.
4923 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
4925 commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
4926 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
4927 Date: Wed Apr 23 11:02:12 2008 +0900
4929 qemu-mips: Cleanup whitespace, indentation, etc.
4931 No functional change.
4933 This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
4934 Then I re-created from scratch, and changed more lines than the original.
4936 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4937 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4939 commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
4940 Author: Vlad Lungu <vlad@comsys.ro>
4941 Date: Wed Oct 10 23:02:09 2007 +0300
4945 Bus and phys address are not always the same
4947 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
4949 commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
4950 Author: Wolfgang Denk <wd@denx.de>
4951 Date: Thu Apr 24 23:44:26 2008 +0200
4953 drivers/net/pcnet.c: Coding Style cleanup.
4955 Signed-off-by: Wolfgang Denk <wd@denx.de>
4957 commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
4958 Author: Vlad Lungu <vlad@comsys.ro>
4959 Date: Wed Oct 10 23:04:23 2007 +0300
4961 Added Am79C970A chip id to pcnet
4963 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
4965 commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
4966 Author: Magnus Lilja <lilja.magnus@gmail.com>
4967 Date: Sun Apr 20 10:35:03 2008 +0200
4969 i.MX31: Fix architecture numbers for ADS and Litekit boards
4971 Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
4973 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
4975 commit e7ae84d6c7288790e88639f57cb60daf89c11369
4976 Author: Magnus Lilja <lilja.magnus@gmail.com>
4977 Date: Sun Apr 20 10:36:36 2008 +0200
4979 i.MX31: Use symbolic names for Litekit membases.
4981 Use symbolic names instead of hard coded addresses for Litekit membases.
4983 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
4985 commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
4986 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4987 Date: Sat Apr 19 17:59:20 2008 +0200
4989 Fix show_boot_progress prototype
4991 in commit fad634071 "make show_boot_progress () weak."
4992 show_boot_progress is supposed to be declared as weak but declared as
4995 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4997 commit edbed247a14d70b94958010f736621212285de91
4998 Author: Bartlomiej Sieka <tur@semihalf.com>
4999 Date: Fri Apr 18 12:39:23 2008 +0200
5001 Memory footprint optimizations
5003 As suggested by Wolfgang Denk:
5004 - image printing functions:
5006 - remove indentation prefix from functions' signatures
5007 - merge getenv_verify and getenv_autostart into one parametrized function
5009 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5011 commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
5012 Author: Guennadi Liakhovetski <lg@denx.de>
5013 Date: Tue Apr 15 13:33:11 2008 +0200
5015 MX31ADS environment variable update, spi and rtc support
5017 Update MX31ADS default environment to better match the flash layout and
5018 the memory map, support SPI and RTC.
5020 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5022 commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
5023 Author: Kumar Gala <galak@kernel.crashing.org>
5024 Date: Mon Apr 21 09:28:36 2008 -0500
5026 85xx: Round up frequency calculations to get reasonable output
5028 eg. because of rounding error we can get 799Mhz instead of 800Mhz.
5030 Introduced DIV_ROUND_UP and roundup taken from linux kernel.
5032 Signed-off-by: Dejan Minic <minic@freescale.com>
5033 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
5034 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5035 Acked-by: Andy Fleming <afleming@freescale.com>
5037 commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
5038 Author: Kumar Gala <galak@kernel.crashing.org>
5039 Date: Wed Apr 23 16:58:04 2008 -0500
5041 fsl_pci: Only modify registers if we have them
5043 pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
5045 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5047 commit 83fe32334337def160b302aa9d152d808bfcc68e
5048 Author: Markus Klotzbücher <mk@denx.de>
5049 Date: Wed Apr 23 10:57:33 2008 +0200
5051 USB: remove a cpu bug workaround for an unsupported architecture.
5053 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5055 commit f957576cb53e6cfab412709cfc8db1afd39d21c3
5056 Author: Markus Klotzbücher <mk@denx.de>
5057 Date: Wed Apr 23 10:53:23 2008 +0200
5059 USB: fix those pesky aliasing warnings issued by gcc-4.2
5061 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
5062 Signed-off-by: Detlev Zundel <dzu@denx.de>
5064 commit 89cdab788f3716b335fefb60b836ebcf975aceab
5065 Author: Mike Frysinger <vapier@gentoo.org>
5066 Date: Mon Mar 31 11:02:01 2008 -0400
5068 crc32: use uint32_t rather than unsigned long
5070 The envcrc.c does sizeof(unsigned long) when calculating the crc, but
5071 this is done with the build toolchain instead of the target tool
5072 chain, so if the build is a 64bit system but the target is 32bits,
5073 the size will obviously be wrong. This converts all unsigned long
5074 stuff related to crc32 to uint32_t types. Compile tested only: output
5075 of ./tools/envcrc when run on a 32bit build system matches that of a
5078 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5079 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5081 commit 80c40b765b3642ddb9f3392b7898715aab44a29c
5082 Author: Dirk Behme <dirk.behme@googlemail.com>
5083 Date: Wed Mar 26 09:53:29 2008 +0100
5085 ARM: Davinci: Fix DM644x timer overflow handling and cleanup
5087 Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
5091 - Remove *_masked() functions as noted by Wolfgang
5093 - Adapt register naming to recent TI spec (sprue26, March 2007)
5095 - Fix reset_timer() handling
5097 - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
5099 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
5101 - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
5103 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
5105 Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
5107 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
5108 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
5110 commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
5111 Author: Sergei Poselenov <sposelenov@emcraft.com>
5112 Date: Wed Apr 9 16:09:41 2008 +0200
5114 Added watchdog triggering calls in the "mtest" test function.
5116 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
5118 commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
5119 Author: Yuri Tikhonov <yur@emcraft.com>
5120 Date: Sun Apr 6 19:19:14 2008 +0200
5122 lwmon5 watchdog: limit trigger rate
5124 Limit the rate of h/w watch-dog triggering on the LWMON5 board by
5125 the CONFIG_WD_MAX_RATE value.
5127 Note that an earlier version of this patch which used microseconds
5128 instead of ticks dis not work. The problem was that we used
5129 usec2ticks() to convert microseconds into ticks. usec2ticks() uses
5130 get_tbclk(), which in turn calls get_sys_info(). It turns out that
5131 this function does a lot of prolonged operations (like divisions)
5132 which take too much time so we do not trigger the watchdog in time,
5133 and it resets the system.
5135 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
5137 commit 2d2b994a30bb100774dc747ae9865b7f95285a88
5138 Author: Yuri Tikhonov <yur@emcraft.com>
5139 Date: Mon Mar 31 10:51:37 2008 +0200
5141 POST: move CONFIG_POST to Makefiles
5143 Introduce the new logical option CONFIG_HAS_POST which is set when the
5144 platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
5145 to determine should the POST libs be compiled for the selected target
5148 To avoid breaking u-boot linking process, the empty post/libpost.a file is
5149 created for platforms which do not have POSTs.
5151 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
5152 Signed-off-by: Wolfgang Denk <wd@denx.de>
5154 commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
5155 Author: Yuri Tikhonov <yur@emcraft.com>
5156 Date: Mon Mar 31 10:49:34 2008 +0200
5158 POST: preparations for moving CONFIG_POST to Makefiles
5160 Remove CONFIG_POST ifdefs from the post/ source files.
5162 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
5163 Signed-off-by: Wolfgang Denk <wd@denx.de>
5165 commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
5166 Author: Stefan Roese <sr@denx.de>
5167 Date: Tue Apr 22 14:14:20 2008 +0200
5169 ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
5171 This patch fixes the Canyonlands and Glacier default environment to better
5172 fit to the arch/powerpc device-tree kernels. The variables dealing with
5173 arch/ppc booting are removed, since these boards are supported only in
5174 arch/powerpc. Glacier uses the same config file as Canyonlands.
5176 Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
5178 Signed-off-by: Stefan Roese <sr@denx.de>
5180 commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
5181 Author: Stefan Roese <sr@denx.de>
5182 Date: Tue Apr 22 14:06:42 2008 +0200
5184 ppc4xx: Small coding style cleanup for the latest esd patches
5186 Signed-off-by: Stefan Roese <sr@denx.de>
5188 commit 79941d63bc03aed8c48d7602f18217cc200ee931
5189 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5190 Date: Mon Apr 21 18:01:07 2008 +0200
5192 ppc4xx: Update CPU strapping for PMC440 boards
5194 This patch removes the temporary 'test' strapping option
5195 of the sbe command. The '667' strapping option now uses
5196 a PLB/PCI divider of 3.
5198 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5200 commit f00cf3193a6635355b121e90debb2f54e777e7da
5201 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5202 Date: Mon Apr 21 14:42:21 2008 +0200
5204 ppc4xx: Remove unused APC405 strataflash driver
5206 The APC405 board support has been migrated to use the common
5209 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5211 commit 1c686676a86473bbd92151f0544e109413f6ed06
5212 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5213 Date: Mon Apr 21 14:42:17 2008 +0200
5215 ppc4xx: Update APC405 configuration
5217 - enable esd's auto_update mechanism
5218 - support alternative flash layout on rev. 1.8 boards
5219 - update default environment
5220 - use common CFI flash driver
5221 - coding style cleanup
5223 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5225 commit 0b9872515a521bf7866dc24b85ddce708e60d702
5226 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5227 Date: Mon Apr 21 14:42:11 2008 +0200
5229 ppc4xx: Update APC405 board support
5231 - enable esd's auto_update mechanism
5232 - fix LCD support on latest hardware revision (uses other LCD controller)
5233 - support alternative flash layout on rev. 1.8 boards
5234 - coding style cleanup
5236 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5238 commit 83975d02e225e231960784972e7820a8b303756b
5239 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5240 Date: Mon Apr 21 14:42:06 2008 +0200
5242 ppc4xx: update esd's common auto_update code for 405 boards
5244 - Coding style cleanup (long lines)
5245 - improve handling of protected flash regions
5248 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5250 commit b9233fe5d59cb25d975071616bd1035d6f4c2285
5251 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5252 Date: Mon Apr 21 14:41:59 2008 +0200
5254 ppc4xx: Update esd's common LCD code for 405 boards
5256 - Coding style cleanup (long lines)
5257 - Add s1d13505 support
5258 - Make some functions return a result code instead of void
5260 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5262 commit dea68189424c3f1242427a8146a3861bf093173c
5263 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5264 Date: Mon Apr 21 11:36:55 2008 +0200
5266 ppc4xx: Update FPGA image for APC405 boards
5268 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5270 commit 2a05b152924acfcec3b037693329e517e6d3578f
5271 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5272 Date: Mon Apr 21 11:36:08 2008 +0200
5274 ppc4xx: Update bootlogo for APC405 boards
5276 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5278 commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
5279 Author: Stefan Roese <sr@denx.de>
5280 Date: Fri Apr 18 16:41:31 2008 +0200
5282 ppc4xx: Add dcache_enable() for 440
5284 dcache_enable() was missing for 440 and the patch
5285 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
5286 "] behavior uses this function.
5288 Note: Currently the cache handling functions like
5289 d/icache_disable/enable() are NOP's on 440. This may be changed in the
5292 Signed-off-by: Stefan Roese <sr@denx.de>
5294 commit a49e0d177a0749614b316ec847fb623f09c82c07
5295 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5296 Date: Mon Apr 21 11:19:04 2008 +0200
5298 video: Add missing free for logo memory
5300 This patch adds two missing free()s.
5302 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5304 commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
5305 Author: Troy Kisky <troy.kisky@boundarydevices.com>
5306 Date: Mon Sep 24 16:41:43 2007 -0700
5308 PATCH - Fix oob data copied into supplied buffer
5310 This patch correctly sets the oobavail variable
5311 and fixes a bug where the oob data was not valid when
5312 there where multiple groups in oobfree.
5314 First segment fixes a typo
5315 Second segment fixes a bug where oob data may be copied incorrectly.
5316 Third segment adds an error message when exiting due to write protect.
5317 Forth segment fixes a bug where oobavail may be set incorrectly.
5319 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
5321 commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
5322 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5323 Date: Fri Apr 18 17:24:32 2008 +0200
5325 ppc4xx: Fix sys_get_info() for 405GP(r)
5327 This patch assigns the correct EBC clock for 405GP(r) CPUs
5328 to PPC4xx_SYS_INFO structure. Without this patch U-Boot
5329 uses an uninitialized EBC clock in its startup message.
5331 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5333 commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
5334 Author: Wolfgang Denk <wd@denx.de>
5335 Date: Sun Apr 20 15:39:38 2008 -0700
5337 Makefile: remove nand_spl/System.map when cleaning up.
5339 commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
5340 Author: Wolfgang Denk <wd@denx.de>
5341 Date: Sun Apr 20 15:35:52 2008 -0700
5343 MAKEALL: sort entries / lists.
5345 Signed-off-by: Wolfgang Denk <wd@denx.de>
5347 commit 0878af169b181868a105b5c33f3a6423e2c9fd60
5348 Author: Kumar Gala <galak@kernel.crashing.org>
5349 Date: Fri Apr 18 11:29:01 2008 -0500
5351 85xx: Fix size of cpu-release-addr property
5353 The cpu-release-addr is defined as always being a 64-bit quanity regardless
5354 if we are running on a 32-bit or 64-bit machine.
5356 commit 88353a985109562a639b2f8a0c90d77011bfe374
5357 Author: Timur Tabi <timur@freescale.com>
5358 Date: Fri Apr 4 11:15:58 2008 -0500
5360 Fix calculation of I2C clock for some 85xx chips
5362 Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
5363 some use CCB/3. There is no pattern that can be used to determine which
5364 chips use which frequency, so the only way to determine is to look up the
5365 actual SOC designation and use the right value for that SOC.
5367 Update immap_85xx.h to include the GUTS PORDEVSR2 register.
5369 Signed-off-by: Timur Tabi <timur@freescale.com>
5371 commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
5372 Author: Wolfgang Denk <wd@denx.de>
5373 Date: Fri Apr 18 11:44:27 2008 -0700
5375 Fix build breakage casued by commit c0559be371b2
5377 Change env_get_char from a global function ptr to a function.
5379 Signed-off-by: Wolfgang Denk <wd@denx.de>
5381 commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
5382 Author: Wolfgang Denk <wd@denx.de>
5383 Date: Fri Apr 18 10:53:41 2008 -0700
5385 Coding Style cleanup, update CHANGELOG.
5387 Signed-off-by: Wolfgang Denk <wd@denx.de>
5389 commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
5390 Author: Mike Frysinger <vapier@gentoo.org>
5391 Date: Tue Apr 8 14:00:57 2008 -0400
5393 Add support for u-boot in svn and localversion-* files
5395 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5397 commit d23ff6827decf121461fbc5622612fd7effe207e
5398 Author: Guennadi Liakhovetski <lg@denx.de>
5399 Date: Thu Apr 3 17:04:22 2008 +0200
5401 MX31ADS network and flash updates
5403 This patch allows U-Boot to use buffered writes to the Spansion NOR
5404 flash installed on this board, and eliminates long delays in network
5405 transfers after the board startup.
5407 Also modify flash layout to embed main and redundant environment
5408 blocks in the U-Boot image.
5410 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5412 commit b5dc9b304d289831f291843ff88a45cbdf1a6290
5413 Author: Guennadi Liakhovetski <lg@denx.de>
5414 Date: Mon Apr 14 10:53:12 2008 +0200
5416 Support for the MX31ADS evaluation board from Freescale
5418 This patch adds support for the MX31ADS evaluation board from Freescale,
5419 initialization code is copied from RedBoot sources, also provided by
5422 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5424 commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
5425 Author: Stefan Roese <sr@denx.de>
5426 Date: Tue Apr 8 10:33:29 2008 +0200
5428 ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
5430 Signed-off-by: Stefan Roese <sr@denx.de>
5432 commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
5433 Author: Stefan Roese <sr@denx.de>
5434 Date: Tue Apr 8 10:33:28 2008 +0200
5436 ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
5438 Signed-off-by: Stefan Roese <sr@denx.de>
5440 commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
5441 Author: Stefan Roese <sr@denx.de>
5442 Date: Tue Apr 8 10:33:27 2008 +0200
5444 ppc4xx: Add Glacier NAND booting target
5446 Signed-off-by: Stefan Roese <sr@denx.de>
5448 commit 46f373838e384a4c23d13581b1dfa5acb66b5810
5449 Author: Stefan Roese <sr@denx.de>
5450 Date: Tue Apr 8 10:31:00 2008 +0200
5452 nand_spl: Update nand_spl to support 2k page size NAND devices
5454 This patch adds support for booting from 2k page sized NAND device
5455 (e.g. Micron 29F2G08AAC).
5457 Tested on AMCC Canyonlands.
5459 Signed-off-by: Stefan Roese <sr@denx.de>
5461 commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
5462 Author: Anatolij Gustschin <agust@denx.de>
5463 Date: Thu Apr 17 18:18:00 2008 +0200
5465 Fix crash on sequoia in ppc_4xx_eth_init
5467 Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
5468 with cache enabled (TLB Parity exeption). This patch
5471 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5473 commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
5474 Author: Anatolij Gustschin <agust@denx.de>
5475 Date: Thu Apr 17 18:15:27 2008 +0200
5477 ppc4xx: Fix crash on sequoia with cache enabled
5479 Currently U-Boot crashes on sequoia board in CPU POST if
5480 cache is enabled (CONFIG_4xx_DCACHE defined). The cache
5481 won't be disabled by change_tlb before CPU POST because
5482 there is an insufficient adress range check since
5483 CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
5486 Signed-off-by: Anatolij Gustschin <agust@denx.de>
5488 commit 43c509254fab375c49936498da944658117ed07c
5489 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
5490 Date: Thu Apr 17 23:35:13 2008 +0900
5492 Use jr as register jump instruction
5494 Current assembler codes are inconsistent in the way of register jump
5495 instruction usage; some use jr, some use j. Of course GNU as allows both
5496 usages, but as can be expected from `Jump Register' the mnemonic `jr' is
5497 more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
5500 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
5502 commit 7ce63709828d37b08866e537339a169bd0db2bd3
5503 Author: Guennadi Liakhovetski <lg@denx.de>
5504 Date: Tue Apr 15 14:15:30 2008 +0200
5506 RTC driver for MC13783
5508 MC13783 is a multifunction IS with an SPI interface to the host. This
5509 driver handles the RTC controller in this chip.
5511 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5513 commit 38254f45b0b412332726c90d3184ad47479fcffb
5514 Author: Guennadi Liakhovetski <lg@denx.de>
5515 Date: Tue Apr 15 14:14:25 2008 +0200
5517 New i.MX31 SPI driver
5519 This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
5520 only implemented and tested on i.MX31, can with a modified register layout
5521 and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
5524 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5526 commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
5527 Author: Magnus Lilja <lilja.magnus@gmail.com>
5528 Date: Tue Apr 15 19:09:10 2008 +0200
5530 Fix name of i.MX31 boards in config file header
5532 Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
5534 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
5536 commit a49864593e083a5d0779fb9ca98e5a0f2053183d
5537 Author: Mike Frysinger <vapier@gentoo.org>
5538 Date: Sun Apr 13 19:42:19 2008 -0400
5540 allow ports to override go behavior
5542 Split the arch-specific logic out of the common go code and into a dedicated
5543 weak function called do_go_exec() that lives in cpu directories. This will
5544 need review from i386/nios people to make sure I didn't break them.
5546 commit 017e9b7925f74878d0e9475388cca9bda5ef9482
5547 Author: Mike Frysinger <vapier@gentoo.org>
5548 Date: Sun Apr 13 19:42:18 2008 -0400
5550 allow ports to override bootelf behavior
5552 Change the bootelf setup function into a dedicated weak function called
5553 do_bootelf_exec. This way ports can control the behavior however they
5554 like before/after calling the ELF entry point.
5556 commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
5557 Author: Ulf Samuelsson <ulf@atmel.com>
5558 Date: Sat Apr 12 20:56:03 2008 +0200
5560 Reorder ARM boards in Makefile
5562 Rearrange ARM boards in Makefile so that ARM926EJ-S boards
5563 are no longer under ARM92xT header.
5565 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
5566 Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5568 commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
5569 Author: Ulf Samuelsson <ulf@atmel.com>
5570 Date: Sat Apr 12 20:29:44 2008 +0200
5572 Clean up dataflash partitioning
5574 This patch removes the board dependent parts from
5575 "drivers/mtd/dataflash.c".
5576 Each board relying on this, will have the appropriate
5577 code in a new file, "partition.c" in the board directory.
5578 board Makefiles updated to use the file.
5580 The dataflash partitions are aligned on sector/page boundaries.
5582 The CONFIG_NEW_DF_PARTITION was used to create named partitions
5583 This is now the default operation, and the CONFIG variable is removed.
5585 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
5587 commit 51ecde946fec511a16346e498204ca10ad71080d
5588 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5589 Date: Sat Apr 12 14:08:45 2008 +0200
5591 gitignore: udpate stgit generated and .patch file
5593 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5595 commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
5596 Author: Wolfgang Denk <wd@denx.de>
5597 Date: Fri Apr 18 00:15:36 2008 -0700
5599 Get rid of redundant copy of renamed header file.
5601 Signed-off-by: Wolfgang Denk <wd@denx.de>
5603 commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
5604 Author: Vlad Lungu <vlad@comsys.ro>
5605 Date: Fri Apr 11 21:20:14 2008 +0300
5607 Fix dependency generation for older gcc versions
5609 With gcc 3.3.3 at least, compilation fails with
5611 Generating include/autoconf.mk
5612 gcc: compilation of header file requested
5613 make: *** [include/autoconf.mk] Error 1
5615 since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
5617 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
5619 commit cb1c4896905ab22fcd982e6a8a539f0031942e71
5620 Author: Marian Balakowicz <m8@semihalf.com>
5621 Date: Fri Apr 11 11:07:49 2008 +0200
5623 Restore the ability to continue booting after legacy image overwrite
5625 Before new uImage code was merged, bootm code allowed for the kernel image to
5626 get overwritten during decompresion. new uImage introduced a check for image
5627 overwrites and refused to boot the image that got overwritten. This patch
5628 restores the old behavior. It also adds a warning when the image overwriten is
5629 a multi-image file, because in such case accessing componentes other than the
5630 first one will fail.
5632 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5634 commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
5635 Author: Marian Balakowicz <m8@semihalf.com>
5636 Date: Fri Apr 11 11:07:43 2008 +0200
5638 ppc: Fix ftd_blob variable init when processing raw blob
5640 Set fdt_blob variable before its value is printed out.
5642 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
5644 commit 3d36be030043cd841a2551d00a395135e363a64b
5645 Author: Jason Wessel <jason.wessel@windriver.com>
5646 Date: Thu Apr 10 14:30:16 2008 -0500
5648 Remove all the search paths from the .lds files.
5650 The cross compiler is responsible for providing the correct libraries
5651 and the logic to find the linking libraries.
5653 Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
5655 commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
5656 Author: Bartlomiej Sieka <tur@semihalf.com>
5657 Date: Mon Apr 14 15:44:16 2008 +0200
5659 Boot-related documentation update
5661 - document 'bootm_low' and 'bootm_size' environment variables
5662 - update inaccurate CFG_BOOTMAPSZ entry
5664 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
5666 commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
5667 Author: Guennadi Liakhovetski <lg@denx.de>
5668 Date: Wed Apr 9 17:34:08 2008 +0200
5670 Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
5672 Restore logic reverted by commit
5674 commit 80767a6cead9990d9e77e62be947843c2c72f469
5675 Author: Peter Pearse <peter.pearse@arm.com>
5676 Date: Wed Sep 5 16:04:41 2007 +0100
5678 Changed API name to coloured_led.h
5679 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
5680 Tidied other cpu/arm920t/start.S code
5682 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5684 commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
5685 Author: Mike Frysinger <vapier@gentoo.org>
5686 Date: Tue Apr 8 10:24:24 2008 -0400
5688 Remove conflicting NAND ID
5690 There are two NAND entries with ID 0xDC and this obviously causes problems.
5691 In the kernel, they punted the first entry, so we should do the same.
5693 See this upstream e-mail for more info:
5694 http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
5696 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
5697 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5699 commit 188e94c370621708d13547d58dbc6ed3c5602aa8
5700 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5701 Date: Tue Apr 8 16:20:35 2008 +0900
5703 cpu/mips/cpu.c: Fix flush_cache bug
5705 Cache operations have to take line address (addr), not start_addr.
5706 I noticed this bug when debugging ping failure.
5708 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5710 commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
5711 Author: Martin Krause <martin.krause@tqs.de>
5712 Date: Thu Apr 3 14:29:01 2008 +0200
5714 TQM5200: fix default IDE reset level
5716 Before the first call of ide_reset(), the level of the IDE reset
5717 signal on the TQM5200 is low (reset asserted). This patch sets the
5718 default value to high (reset not asserted).
5720 Currently this patch fixes no real problem, but it is cleaner to
5721 assert the reset signal only on demand, and not permanently.
5723 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5725 commit c61e033d6e8abb7b4060ee36060961e1399f6079
5726 Author: Detlev Zundel <dzu@denx.de>
5727 Date: Thu Apr 3 14:18:48 2008 +0200
5729 mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
5731 Signed-off-by: Detlev Zundel <dzu@denx.de>
5733 commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
5734 Author: Detlev Zundel <dzu@denx.de>
5735 Date: Thu Apr 3 14:18:47 2008 +0200
5737 mgcoge, mgsuv: rename 'addcon' to 'addcons'
5739 The latter name with 13 users is already established, so we will use
5742 Signed-off-by: Detlev Zundel <dzu@denx.de>
5744 commit e175eacc87c3a9e4dad0799fee0e95732520afc7
5745 Author: Martin Krause <martin.krause@tqs.de>
5746 Date: Thu Apr 3 13:37:56 2008 +0200
5748 IDE: fix bug in reset sequence
5750 According to the ata (ata5) specification the RESET- signal
5751 shall be asserted for at least 25 us. Without this patch,
5752 the RESET- signal is asserted on some boards for only < 1 us
5753 (e. g. on the TQM5200). This patch adds a general delay of
5754 25 us to the RESET- signal.
5756 Without this patch a Platinum 4 GiB CF card is not recognised
5757 properly on boards with a TQM5200 (STK52xx, TB5200).
5759 Signed-off-by: Martin Krause <martin.krause@tqs.de>
5761 commit 813bea96a960916c72b4a3a7df840151529c26ce
5762 Author: Sascha Laue <Sascha.Laue@gmx.biz>
5763 Date: Thu Apr 3 14:43:11 2008 +0200
5765 lwmon5: disable CONFIG_ZERO_BOOTDELAY
5767 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
5769 commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
5770 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5771 Date: Wed Apr 2 08:03:58 2008 +0200
5773 ds174x: Fix warning on return in rtc_get and rtc_set functions
5775 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5777 commit a253b38bf50c85227c33ca0febc870ee49d1588e
5778 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5779 Date: Wed Apr 2 08:03:57 2008 +0200
5781 cmd_log.c: Fix assignment differ in signedness
5783 In function 'logbuff_init_ptrs':
5784 cmd_log.c:79: warning: pointer targets in assignment differ in signedness
5786 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5788 commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
5789 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
5790 Date: Wed Apr 2 11:04:43 2008 +0530
5792 Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
5794 Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
5796 commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
5797 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5798 Date: Tue Apr 1 14:07:10 2008 +0200
5800 s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
5802 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5804 commit c08fb3ea36d19b1640b7906264581e9105534399
5805 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
5806 Date: Tue Apr 15 10:24:14 2008 +0200
5808 Additional PCI IDs for IDE and network controllers
5810 These PCI IDs are required by the Linkstation platforms.
5812 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
5814 commit c0559be371b2a64b1a817088c3308688e2182f93
5815 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
5816 Date: Mon Apr 14 23:01:50 2008 +0200
5818 Change env_get_char from a global function ptr to a function.
5820 This avoids an early global data reference.
5822 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
5824 commit 3e0f331c05d72f140715c1e9fca991927e44d422
5825 Author: Guennadi Liakhovetski <lg@denx.de>
5826 Date: Tue Apr 29 12:35:08 2008 +0000
5828 Clean up smsc911x driver
5830 Replace direct register address derefencing with accessor functions.
5831 Restrict explicitly 32-bit bus-width, extend affected configurations
5834 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5835 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5837 commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
5838 Author: Sascha Hauer <s.hauer@pengutronix.de>
5839 Date: Tue Apr 15 00:08:20 2008 -0400
5841 This patch adds a driver for the following smsc network controllers:
5849 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
5850 Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
5851 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5853 commit 3dfd4aab929cccddb63d9ea509967861e1333b52
5854 Author: Sascha Laue <Sascha.Laue@gmx.biz>
5855 Date: Tue Apr 1 15:13:03 2008 +0200
5857 Fix watchdog POST for lwmon5
5859 If the hardware watchdog detects a voltage error, the watchdog sets
5860 GPIO62 to low. The watchdog POST has to detect this low level.
5862 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
5864 commit 24b448448a917e52806f82660a5c9d47608894fb
5865 Author: Dave Liu <r63238@freescale.com>
5866 Date: Tue Apr 1 15:22:11 2008 +0800
5868 ata: update the libata.h from ata.h of linux kernel
5870 Current libata.h of u-boot is out of sync from linux kernel,
5871 this patch make it be consistent with linux kernel.
5873 Signed-off-by: Dave Liu <daveliu@freescale.com>
5874 Signed-off-by: Tor Krill <tor@excito.com>
5876 commit f8f9dc98883f66f59eb0601da65808e6b139c87c
5877 Author: Kumar Gala <galak@kernel.crashing.org>
5878 Date: Mon Mar 31 11:59:27 2008 -0500
5880 Allow use of ARCH=powerpc when building
5882 The linux kernel is now mostly ARCH=powerpc, so to make life easier
5883 allow use to use ARCH=powerpc and convert it to ARCH=ppc.
5885 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5887 commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
5888 Author: Kyungmin Park <kmpark@infradead.org>
5889 Date: Mon Mar 31 10:40:54 2008 +0900
5891 Add apollon board MAINTAINERS entry
5893 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5895 commit 77e475cc0ed1832160017d364be32a0be9ff02a9
5896 Author: Kyungmin Park <kmpark@infradead.org>
5897 Date: Mon Mar 31 10:40:36 2008 +0900
5901 It should access with 16-bit instead of 8-bit
5903 Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
5905 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5907 commit a9da2b41079d230db3a5641625311983f85ce1fb
5908 Author: Kyungmin Park <kmpark@infradead.org>
5909 Date: Mon Mar 31 10:40:19 2008 +0900
5911 Fix OneNAND erase command
5913 It mis-calculates the block address.
5914 Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
5916 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5918 commit 61525f2ffa156665a66908fda47dbf29d65ea579
5919 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
5920 Date: Mon Mar 31 01:32:15 2008 +0200
5922 Support for LinkStation / KuroBox HD and HG PPC models
5924 This patch is based on the port by Mihai Georgian (see linkstation.c for
5925 Copyright information) and implements support for LinkStation / KuroBox HD
5926 and HG PPC models from Buffalo Technology, whereby HD is deactivated at
5927 the moment, pending network driver fixing.
5929 Notice to users: this is pretty much a barebone port. Support for network
5930 on HG models is already in the U-Boot mainline, but you might also want
5931 patches to switch fan / phy modes depending on the negotiated ethernet
5932 parameters. This patch also doesn't support console switching, booting EM
5933 mode, Buffalo specific ext2 magic number. So, if you want to use any of
5934 those, you need additional patches. Otherwise this patche provides a fully
5935 functional u-boot with a network console on your system.
5937 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5939 commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
5940 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5941 Date: Sun Mar 30 01:22:13 2008 -0500
5943 Add CONFIG_MII_INIT support to related boards
5945 Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
5946 cmd_init.c. Add CONFIG_MII_INIT to board configuration files
5947 that use mii_init() in cmd_init.c.
5949 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5950 Acked-by: Ben Warren <biggerbadderben@gmail.com>
5952 commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
5953 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5954 Date: Sun Mar 30 01:19:06 2008 -0500
5956 Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
5958 Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
5959 CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
5961 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5963 commit e99ccb488181d012248c6be30b2093e950319fc5
5964 Author: Kumar Gala <galak@kernel.crashing.org>
5965 Date: Thu Mar 27 11:46:38 2008 -0500
5967 Introduce phys_size_t and move phys_addr_t into asm/types.h
5969 Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
5970 that have larger physical addresses like 44x, 85xx, and 86xx.
5972 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5974 commit 20a14a42a25f72e379f38460b8a8484667536795
5975 Author: Andy Fleming <afleming@freescale.com>
5976 Date: Wed Apr 2 16:19:07 2008 -0500
5978 Rename include/md5.h to include/u-boot/md5.h
5980 Some systems have md5.h installed in /usr/include/. This isn't the
5981 desired file (we want the one in include/md5.h). This will avoid the
5982 conflict. This fixes the host tools building problem by creating a new
5983 directory for U-Boot specific header files.
5985 [Patch by Andy Fleming, modified to use separate directory by Wolfgang
5988 Signed-off-by: Wolfgang Denk <wd@denx.de>
5989 Signed-off-by: Andy Fleming <afleming@freescale.com>
5990 Acked-by: Timur Tabi <timur@freescale.com>
5992 commit f297b7a1ec87433f66320d89d993e1bc738c66b8
5993 Author: Dave Liu <r63238@freescale.com>
5994 Date: Thu Mar 27 18:51:17 2008 +0800
5996 drivers: code clean up
5998 Signed-off-by: Dave Liu <daveliu@freescale.com>
6000 commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
6001 Author: Dave Liu <r63238@freescale.com>
6002 Date: Thu Mar 27 18:50:41 2008 +0800
6004 drivers: clean up the ata_piix.h
6006 Signed-off-by: Dave Liu <daveliu@freescale.com>
6008 commit e8f7ba404f1409606962815ecc955a06984b08b3
6009 Author: Dave Liu <r63238@freescale.com>
6010 Date: Thu Mar 27 18:49:56 2008 +0800
6012 doc: english polishing for README.sata
6014 according to gvb's suggestion, polishing for the doc.
6016 Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
6017 Signed-off-by: Dave Liu <daveliu@freescale.com>
6019 commit 3e3f766a5274d204780460e1879723b565296d34
6020 Author: Kumar Gala <galak@kernel.crashing.org>
6021 Date: Wed Mar 26 18:53:28 2008 -0500
6023 Fix warnings introduced by I2C bus speed setting patch
6025 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6027 commit 3c735e7437150e8615f26930c7819db85634276d
6028 Author: eran liberty <eran.liberty@gmail.com>
6029 Date: Thu Mar 27 00:50:49 2008 +0100
6031 Altera Stratix II support
6033 Adds Support for Altera's Stratix II.
6035 Within your board specific init file you will have to call
6037 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
6038 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
6040 Altera_desc* contines (for example):
6042 Altera_StratixII, /* part type */
6043 passive_serial, /* interface type */
6044 1, /* bytes of data part can accept */
6045 (void *)(&funcs), /* interface function table */
6046 0L, /* base interface address */
6047 0 /* implementation specific cookie */
6050 funcs is the interface. It is of type altera_board_specific_func.
6052 altera_board_specific_func func = {
6063 you will have to implement these functions, which is usually bit
6066 Signed-off-by: Eran Liberty <liberty@extricom.com>
6068 commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
6069 Author: Wolfgang Denk <wd@denx.de>
6070 Date: Sun Apr 13 14:32:54 2008 -0700
6074 Signed-off-by: Wolfgang Denk <wd@denx.de>
6076 commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
6077 Author: Sascha Hauer <s.hauer@pengutronix.de>
6078 Date: Wed Mar 26 20:41:17 2008 +0100
6080 Phytec Phycore-i.MX31 support
6082 This patch adds support for the Phytec Phycore-i.MX31 board
6084 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
6085 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6087 commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
6088 Author: Sascha Hauer <s.hauer@pengutronix.de>
6089 Date: Wed Mar 26 20:41:09 2008 +0100
6091 mx31 litekit support
6093 This patch adds support for the mx31 litekit board
6095 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
6096 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6098 commit cdace0661208754a53019ea0dc7b803a040e0939
6099 Author: Sascha Hauer <s.hauer@pengutronix.de>
6100 Date: Wed Mar 26 20:40:49 2008 +0100
6102 add an i2c driver for mx31
6104 This patch adds an i2c driver for Freescale i.MX processors
6106 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
6107 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6109 commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
6110 Author: Sascha Hauer <s.hauer@pengutronix.de>
6111 Date: Wed Mar 26 20:40:42 2008 +0100
6113 core support for Freescale mx31
6115 This patch adds the core support for Freescale mx31
6117 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
6118 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6120 commit 7ec68862a27c8f6f6d566228de8f6724d964a939
6121 Author: Wolfgang Denk <wd@denx.de>
6122 Date: Sun Apr 13 14:19:23 2008 -0700
6126 ...as suggested by Peter Pearse
6128 Signed-off-by: Wolfgang Denk <wd@denx.de>
6130 commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
6131 Author: Sascha Hauer <s.hauer@pengutronix.de>
6132 Date: Wed Mar 26 20:40:36 2008 +0100
6134 Separate omap24xx specific code from arm1136
6136 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
6137 to cpu/arm1136/omap24xx.
6139 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
6140 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6142 commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
6143 Author: Mike Frysinger <vapier@gentoo.org>
6144 Date: Tue Jan 29 18:21:05 2008 -0500
6146 disable caches before booting an app for Blackfin apps
6148 It isn't generally save to execute applications outside of U-Boot with caches
6149 enabled due to the way the Blackfin processor handles caches (requires
6150 software assistance). This patch disables caches before booting an ELF or
6151 just booting raw code. The previous discussion on the patch was that we
6152 wanted to use weaks instead, but that proved to not be feasible when multiple
6153 symbols are involved, which puts us back at the ifdef solution. I've
6154 minimized the ugliness by moving the setup step outside of the main function.
6156 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6158 commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
6159 Author: Wolfgang Denk <wd@denx.de>
6160 Date: Sun Apr 13 10:03:54 2008 -0700
6162 ppc: Get rid of unused machine type definitions
6164 Signed-off-by: Wolfgang Denk <wd@denx.de>
6166 commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
6167 Author: Wolfgang Denk <wd@denx.de>
6168 Date: Sun Apr 13 09:59:26 2008 -0700
6170 Coding Style cleanup; update CHANGELOG
6172 Signed-off-by: Wolfgang Denk <wd@denx.de>
6174 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
6175 Author: Larry Johnson <lrj@acm.org>
6176 Date: Thu Feb 21 13:58:11 2008 -0500
6178 LM73 bug fix for negative temperatures and cleanup
6180 When the LM73 temperature sensor measures a temperature below 0 C, the
6181 current driver does not perform sign extension, so the result returned is
6182 512 C too high. This patch fixes the problem, and does general cleanup
6185 Signed-off-by: Larry Johnson <lrj@acm.org>
6187 commit 96ef831f713289afba19da0c8f905e99da2b23e0
6188 Author: Guennadi Liakhovetski <lg@denx.de>
6189 Date: Thu Apr 3 13:36:02 2008 +0200
6191 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
6193 Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
6194 series require different addresses for buffered write commands. Define a
6195 configuration option to support buffered writes on those chips. A more
6196 elegant solution would be to automatically detect those chips by parsing
6197 their CFI records, but that would require introduction of a fixup table
6198 into the cfi_flash driver.
6200 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6202 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
6203 Author: Lee Nipper <lee.nipper@freescale.com>
6204 Date: Thu Apr 10 09:35:06 2008 -0500
6206 mpc83xx: Update DIMM data bus width test to support 40-bit width
6208 32-bit wide ECC memory modules report 40-bit width.
6209 Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
6211 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
6212 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6214 commit 5fb5a689d822ca61e814bd523fc930af335242fa
6215 Author: Dave Liu <r63238@freescale.com>
6216 Date: Mon Mar 31 17:05:12 2008 +0800
6218 mpc83xx: Fix the bug of serdes initialization
6220 Currently the serdes will not be initializated due to the
6223 Signed-off-by: Dave Liu <daveliu@freescale.com>
6224 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6226 commit 2000784818f043db7ca60e2846a72d097766b894
6227 Author: Dave Liu <r63238@freescale.com>
6228 Date: Thu Apr 3 16:28:29 2008 +0800
6230 mpc83xx: Fix the SATA clock setting of 837x targets
6232 Currently the SATA controller clock is configured as CSB clock,
6233 usually the CSB clock is 400/333/266MHz.
6235 However, The SATA IP block is only guaranteed to operate up to
6236 200 MHz as stated in the HW spec.
6238 The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
6240 This patch makes the SATA clock as half of CSB clock.
6242 Signed-off-by: Dave Liu <daveliu@freescale.com>
6243 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6245 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
6246 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6247 Date: Wed Apr 2 13:41:21 2008 +0200
6249 mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
6251 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6252 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6254 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
6255 Author: Kumar Gala <galak@kernel.crashing.org>
6256 Date: Wed Apr 9 04:20:57 2008 -0500
6258 85xx: Fix detection of MP cpu spin up
6260 We were looking at the wrong memory offset to determine of a secondary
6261 cpu had been spun up or not. Also added a warning message if the
6262 all the secondary cpus we expect don't spin up.
6264 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6266 commit f3e04bdc3f360c66801a9048956e61e41a16edba
6267 Author: Kumar Gala <galak@kernel.crashing.org>
6268 Date: Tue Apr 8 10:45:50 2008 -0500
6270 85xx: Use SVR_SOC_VER instead of SVR_VER
6272 The recent change introduced by 'Update SVR numbers to expand support'
6273 now requires that we use SVR_SOC_VER instead of SVR_VER if we want
6274 to compare against a particular processor id.
6276 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6278 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
6279 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
6280 Date: Fri Apr 11 10:00:35 2008 -0400
6282 ppc4xx: Fix power mgt definitions for PPC440
6284 Corrected DCR addresses of PPC440EP power management registers.
6286 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
6288 commit 950a392464e616b4590bc4501be46e2d7d162dea
6289 Author: Wolfgang Denk <wd@denx.de>
6290 Date: Fri Apr 11 15:11:26 2008 +0200
6292 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
6294 Reverting became necessary after it turned out that the patches in
6295 the u-boot-arm repo were modified, and in some cases corrupted.
6297 This reverts the following commits:
6299 066bebd6353e33af3adefc3404560871699e9961
6300 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
6301 c88ae20580b2b01487b4cdcc8b2a113f551aee36
6302 a147e56f03871bba4f05058d5e04ce7deb010b04
6303 d6674e0e2a6a1f033945f78838566210d3f28c95
6304 8c8463cce44d849e37744749b32d38e1dfb12e50
6305 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
6306 8bf69d81782619187933a605f1a95ee1d069478d
6307 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
6308 a574a73852a527779234e73e17e7597fd8128882
6309 1377b5583a48021d983e1fd565f7d40c89e84d63
6310 1704dc20917b4f71e373e2c888497ee666d40380
6312 Signed-off-by: Wolfgang Denk <wd@denx.de>
6314 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
6315 Author: Stefan Roese <sr@denx.de>
6316 Date: Fri Apr 11 07:02:29 2008 +0200
6318 ppc4xx: Update Kilauea defconfig to use device-tree booting as default
6320 This patch reworks the default environment on Kilauea/Haleakala. Now
6321 "net_nfs" for exmaple uses the device-tree style booting formerly know
6322 as "net_nfs_fdt". Also the addresses in RAM were changed because of the
6323 new image booting support, which check for image overwriting. So the
6324 addresses needed togeet adjusted.
6326 Signed-off-by: Stefan Roese <sr@denx.de>
6328 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
6329 Author: Stefan Roese <sr@denx.de>
6330 Date: Wed Apr 9 11:58:02 2008 +0200
6332 ppc4xx: Fix Canyonlands default environment to work with new image support
6334 Since the new image support checks for image overwriting, the default
6335 environment needs to get adjusted to use correct addresses.
6337 Signed-off-by: Stefan Roese <sr@denx.de>
6339 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
6340 Author: Stefan Roese <sr@denx.de>
6341 Date: Wed Apr 9 11:54:11 2008 +0200
6343 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
6345 The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
6346 closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
6347 on 4xx systems _start currently cannot be used for this calculation.
6348 So revert back to the original version for now.
6350 Signed-off-by: Stefan Roese <sr@denx.de>
6352 commit f91374f65eae8b42cac329e06ba1c54728278efb
6353 Author: Michal Simek <monstr@monstr.eu>
6354 Date: Fri Mar 28 12:49:52 2008 +0100
6356 microblaze: Sort microblaze boards in MAKEALL script
6358 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
6359 Author: Michal Simek <monstr@monstr.eu>
6360 Date: Fri Mar 28 11:58:45 2008 +0100
6362 microblaze: clean microblaze_config.mk
6364 FLAGS are generated by U-BOOT generator.
6365 Board specific FLAGS are in board directory
6367 Signed-off-by: Michal Simek <monstr@monstr.eu>
6369 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
6370 Author: Michal Simek <monstr@monstr.eu>
6371 Date: Fri Mar 28 12:47:19 2008 +0100
6373 microblaze: xupv2p fix config file for supporting FDT
6375 commit 188dc16b189143573b1ed90e584bf866d75cdd12
6376 Author: Michal Simek <monstr@monstr.eu>
6377 Date: Fri Mar 28 11:53:02 2008 +0100
6379 microblaze: ml401 fix config file for supporting FDT
6381 Signed-off-by: Michal Simek <monstr@monstr.eu>
6383 commit 4c6a6f02e239236261333759997eeaf86b30b54c
6384 Author: Michal Simek <monstr@monstr.eu>
6385 Date: Fri Mar 28 11:22:48 2008 +0100
6387 microblaze: ml401 - add ifdef for GPIO
6389 Signed-off-by: Michal Simek <monstr@monstr.eu>
6391 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
6392 Author: Michal Simek <monstr@monstr.eu>
6393 Date: Fri Mar 28 12:13:03 2008 +0100
6395 microblaze: clean uart16550 and uartlite handling
6397 Signed-off-by: Michal Simek <monstr@monstr.eu>
6399 commit 0b20f250877441460fb79d72192954abe8498834
6400 Author: Michal Simek <monstr@monstr.eu>
6401 Date: Fri Mar 28 11:08:31 2008 +0100
6403 microblaze: Add Emaclite driver to Makefile
6405 Signed-off-by: Michal Simek <monstr@monstr.eu>
6407 commit 868cde5310f88234b774878e4f06e79df10a88b3
6408 Author: Michal Simek <monstr@monstr.eu>
6409 Date: Fri Mar 28 11:08:01 2008 +0100
6411 microblaze: Add Emac driver to Makefile
6413 Signed-off-by: Michal Simek <monstr@monstr.eu>
6415 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
6416 Author: Michal Simek <monstr@monstr.eu>
6417 Date: Fri Mar 28 12:42:29 2008 +0100
6419 microblaze: add Emac ethernet driver
6421 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
6422 Author: Michal Simek <monstr@monstr.eu>
6423 Date: Fri Mar 28 12:41:56 2008 +0100
6425 microblaze: add Emaclite ethernet driver
6427 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
6428 Author: Michal Simek <monstr@monstr.eu>
6429 Date: Fri Mar 28 11:04:01 2008 +0100
6431 microblaze: ML401 and XUPV2P remove emac and emaclite reference
6433 Signed-off-by: Michal Simek <monstr@monstr.eu>
6435 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
6436 Author: Michal Simek <monstr@monstr.eu>
6437 Date: Fri Mar 28 10:59:32 2008 +0100
6439 microblaze: remove old setting for emac driver
6441 Signed-off-by: Michal Simek <monstr@monstr.eu>
6443 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
6444 Author: Michal Simek <monstr@monstr.eu>
6445 Date: Fri Mar 28 10:58:15 2008 +0100
6447 microblaze: Clean Makefile from ancient emac driver
6449 Signed-off-by: Michal Simek <monstr@monstr.eu>
6451 commit ab68f921d9c741830f721c3d879c13a0c5597183
6452 Author: Daniel Hellstrom <daniel@gaisler.com>
6453 Date: Fri Mar 28 10:20:43 2008 +0100
6455 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
6457 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6459 commit 6ed8a43a19bb0275501bc286007daafa923552cf
6460 Author: Daniel Hellstrom <daniel@gaisler.com>
6461 Date: Wed Mar 26 23:38:48 2008 +0100
6463 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
6465 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6467 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
6468 Author: Daniel Hellstrom <daniel@gaisler.com>
6469 Date: Wed Mar 26 23:34:47 2008 +0100
6471 SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
6473 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6475 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
6476 Author: Daniel Hellstrom <daniel@gaisler.com>
6477 Date: Fri Mar 28 10:06:52 2008 +0100
6479 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
6481 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6483 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
6484 Author: Daniel Hellstrom <daniel@gaisler.com>
6485 Date: Wed Mar 26 23:26:48 2008 +0100
6487 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
6489 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6491 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
6492 Author: Daniel Hellstrom <daniel@gaisler.com>
6493 Date: Fri Mar 28 10:00:33 2008 +0100
6495 SPARC: Added support for SPARC LEON2 SOC Processor.
6497 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6499 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
6500 Author: Daniel Hellstrom <daniel@gaisler.com>
6501 Date: Wed Mar 26 23:00:38 2008 +0100
6503 SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
6505 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6507 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
6508 Author: Daniel Hellstrom <daniel@gaisler.com>
6509 Date: Wed Mar 26 22:51:29 2008 +0100
6511 SPARC: Added support for SPARC LEON3 SOC processor.
6513 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6515 commit bf3d8b31169546fcddb4737391e1893fb12d033a
6516 Author: Daniel Hellstrom <daniel@gaisler.com>
6517 Date: Fri Mar 28 08:29:26 2008 +0100
6519 SPARC: added SPARC support for new uimage in common code.
6521 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6523 commit 00ab32c85405a4fe65fd4128243086210fc90a21
6524 Author: Daniel Hellstrom <daniel@gaisler.com>
6525 Date: Wed Mar 26 22:36:03 2008 +0100
6527 SPARC: added SPARC board information to the command bdinfo.
6529 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6531 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
6532 Author: Daniel Hellstrom <daniel@gaisler.com>
6533 Date: Fri Mar 28 09:47:00 2008 +0100
6535 SPARC: Added generic support for SPARC architecture.
6537 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6539 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
6540 Author: Stefan Roese <sr@denx.de>
6541 Date: Thu Apr 3 14:50:34 2008 +0200
6543 ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
6545 This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
6546 has 2 RGMII instances and we need to configure the 2nd RGMII instance
6547 for the EMAC2+3 channels.
6549 Signed-off-by: Stefan Roese <sr@denx.de>
6551 commit c2a545ce33b26d80337f80b533828839249fb1c9
6552 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6553 Date: Wed Apr 2 08:03:56 2008 +0200
6555 MPC8xx: Fix libfdt support introduced in commit 77ff7b74
6557 fdt.c: In function 'ft_cpu_setup':
6558 fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
6559 fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
6560 fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
6561 fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
6563 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6565 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
6566 Author: Andy Fleming <afleming@freescale.com>
6567 Date: Mon Mar 31 20:45:56 2008 -0500
6569 Fix fdt set command to conform to dts spec
6571 The fdt set command was treating properties specified as <00> and <0011>
6572 as byte streams, rather than as an array of cells. As we already have
6573 syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
6574 we should use the <> syntax to describe arrays of cells, which are always
6575 32-bits per element. If we imagine this likely (IMHO) scenario:
6577 > fdt set /ethernet-phy@1 reg <1>
6579 With the old code, this would create a bad fdt, since the reg cell would be
6580 made to be one byte in length. But the cell must be 4 bytes, so this would
6583 Also, the dts spec calls for constants inside the angle brackets (<>)
6584 to conform to C constant standards as they pertain to base.
6587 > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
6589 The old fdt command would complain that it couldn't parse that. Or, if you
6590 wanted to specify that a certain clock ran at 33 MHz, you'd be required to
6593 > fdt set /mydev clock <1f78a40>
6595 Whereas the new code will accept decimal numbers.
6597 While I was in there, I extended the fdt command parser to handle property
6598 strings which are split across multiple arguments:
6600 > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
6601 > fdt p /ethernet@f00
6603 interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
6606 Lastly, the fdt print code was rearranged slightly to print arrays of cells
6607 if the length of the property is a multiple of 4 bytes, and to not print
6610 Signed-off-by: Andy Fleming <afleming@freescale.com>
6612 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
6613 Author: Stefan Roese <sr@denx.de>
6614 Date: Wed Apr 2 08:39:33 2008 +0200
6616 ppc4xx: Canyonlands: Init SATA/PCIe port correctly
6618 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
6619 interface. This usage can be configured with the jumper J6. This patch
6620 correctly configures the SATA/PCIe PHY for SATA usage when this jumper
6623 Signed-off-by: Stefan Roese <sr@denx.de>
6625 commit 6fe2946f198481254a6ee9600d7456b8316a4083
6626 Author: Kim Phillips <kim.phillips@freescale.com>
6627 Date: Fri Mar 28 17:37:49 2008 -0500
6629 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
6631 finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
6632 "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
6635 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
6637 commit b5873f1732b92a25690e1513b90dfb0d644f6697
6638 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6639 Date: Tue Apr 1 07:30:51 2008 +0200
6641 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
6643 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6645 commit 2d934ea51f276522b532f870a820e844ff480b5b
6646 Author: Tor Krill <tor@excito.com>
6647 Date: Fri Mar 28 15:29:45 2008 +0100
6649 Add Vitesse 8601 support to TSEC driver
6651 Add phy_info for Vitesse VSC8601.
6652 Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
6654 Signed-off-by: Tor Krill <tor@excito.com>
6655 Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
6656 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6658 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
6659 Author: Daniel Hellstrom <daniel@gaisler.com>
6660 Date: Mon Mar 31 14:25:00 2008 +0000
6662 SPARC: added SMC91111 driver in and out macros for LEON processors.
6664 This patch makes SPARC/LEON processors able to read and write
6665 to the SMC91111 chip using the chip external I/O bus of the memory
6666 controller. This patchs defines the standard in and out macros
6667 expected by the SMC9111 driver.
6669 To access that I/O bus one must set up the memory controller
6670 (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
6671 up this correctly when the other MCTRL parameters are set up. It
6672 can be set up from the board configuration header file.
6674 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
6675 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6677 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
6678 Author: Stelian Pop <stelian@popies.net>
6679 Date: Wed Mar 26 18:52:34 2008 +0100
6681 Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
6683 Signed-off-by: Stelian Pop <stelian@popies.net>
6685 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
6686 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6687 Date: Mon Mar 31 21:31:04 2008 +0200
6689 AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
6691 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6693 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
6694 Author: Stelian Pop <stelian@popies.net>
6695 Date: Wed Mar 26 18:52:33 2008 +0100
6697 Add support for AT91SAM9260EK
6699 Support for booting from internal DataFlash, external DataFlash card
6700 or NAND flash is available.
6702 Signed-off-by: Stelian Pop <stelian@popies.net>
6704 commit 1762f13b4aab88b685b1722f17dada247945624b
6705 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6706 Date: Mon Mar 31 21:20:49 2008 +0200
6708 AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
6710 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6712 commit 761712188b353494defb2b644491ff73d0daaa6f
6713 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6714 Date: Mon Mar 31 21:12:17 2008 +0200
6716 AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
6718 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6720 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
6721 Author: Stelian Pop <stelian@popies.net>
6722 Date: Wed Mar 26 20:52:32 2008 +0100
6724 Port AT91CAP9 to the new headers
6726 Adapt the existing AT91CAP9 code to the new headers and APIs.
6728 Signed-off-by: Stelian Pop <stelian@popies.net>
6730 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
6731 Author: Stelian Pop <stelian@popies.net>
6732 Date: Wed Mar 26 19:52:31 2008 +0100
6734 Finish header files reworking
6736 Replace AT91CAP9.h file with several splitted header files coming
6737 from the Linux kernel.
6739 This is part 2 of the replacement: more header imports and edits.
6741 Signed-off-by: Stelian Pop <stelian@popies.net>
6743 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
6744 Author: Stelian Pop <stelian@popies.net>
6745 Date: Wed Mar 26 19:52:30 2008 +0100
6747 Import several header files from Linux
6749 Replace AT91CAP9.h file with several splitted header files coming
6750 from the Linux kernel.
6752 This is part 1 of the replacement: pristine header files import.
6754 Signed-off-by: Stelian Pop <stelian@popies.net>
6756 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
6757 Author: Stelian Pop <stelian@popies.net>
6758 Date: Wed Mar 26 20:52:28 2008 +0100
6760 Move at91cap9 specific files to at91sam9 directory
6762 AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
6763 common infrastructure can be used. Let this infrastructure be
6764 named after the AT91SAM9 family, and move the existing AT91CAP9
6765 files to the new place.
6767 Signed-off-by: Stelian Pop <stelian@popies.net>
6769 commit 61106a565870ff503f92b251b94bd7afef889a04
6770 Author: Stelian Pop <stelian@popies.net>
6771 Date: Wed Mar 26 21:52:27 2008 +0100
6773 Use timer_init() instead of board supplied interrupt_init()
6775 The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
6776 the board, so use timer_init() instead of interrupt_init().
6778 Signed-off-by: Stelian Pop <stelian@popies.net>
6780 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
6781 Author: Stelian Pop <stelian@popies.net>
6782 Date: Wed Mar 26 21:52:36 2008 +0100
6784 Cleanup DataFlash partition handling
6786 DataFlash partition information has become a mess. This patch
6787 defines a single partition scheme for Atmel DataFlashes. This partition
6788 scheme will be used by all AT91CAP9 and AT91SAM9 boards.
6790 Signed-off-by: Stelian Pop <stelian@popies.net>
6792 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
6793 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6794 Date: Fri Mar 28 08:47:45 2008 -0500
6796 ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
6798 When the version_string function in start.S is not 4-byte align,
6799 it will cause the compiler generates "unaligned opcodes detected
6800 in executable segment". This issue affects all ColdFire CPUs.
6801 By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
6804 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6805 Acked-by: John Rigby <jrigby@freescale.com>
6807 commit bae61eefe15b4d454060a7140e49ae58322be803
6808 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6809 Date: Tue Mar 25 15:41:15 2008 -0500
6811 ColdFire: Add dspi and serial flash support for MCF5445x
6813 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6814 Acked-by: John Rigby <jrigby@freescale.com>
6816 commit 48ead7a7a922fceaf494e352abfab8216a41b417
6817 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6818 Date: Tue Mar 18 17:37:01 2008 -0500
6820 ColdFire: Remove R5200 board
6822 This board never went into production
6824 Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
6825 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6826 Acked-by: John Rigby <jrigby@freescale.com>
6828 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
6829 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
6830 Date: Thu Jan 24 14:02:32 2008 -0600
6832 ColdFire: Added M5275EVB support.
6834 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
6835 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6836 Acked-by: John Rigby <jrigby@freescale.com>
6838 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
6839 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
6840 Date: Mon Feb 4 15:38:20 2008 -0600
6842 ColdFire: Added MCF5275 cpu support.
6844 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
6845 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6846 Acked-by: John Rigby <jrigby@freescale.com>
6848 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
6849 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6850 Date: Mon Mar 17 12:14:11 2008 -0500
6852 ColdFire: Define bootdelay in configuration file for M52277EVB
6854 Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
6855 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6856 Acked-by: John Rigby <jrigby@freescale.com>
6858 commit 77878f16cedee17161ff2336990970fffc6cea35
6859 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6860 Date: Mon Mar 17 12:09:07 2008 -0500
6862 ColdFire: Fix second memory Chipselect for M5475EVB
6864 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6865 Acked-by: John Rigby <jrigby@freescale.com>
6867 commit 43d60642395a550956cb21d287c8cfa563913d28
6868 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6869 Date: Thu Mar 13 14:26:32 2008 -0500
6871 ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
6873 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6874 Acked-by: John Rigby <jrigby@freescale.com>
6876 commit eb14ebe813a0cb5d47905228da446a5ad692473b
6877 Author: Larry Johnson <lrj@acm.org>
6878 Date: Sun Mar 30 20:33:04 2008 -0500
6880 ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
6882 Signed-off-by: Larry Johnson <lrj@acm.org>
6884 commit 02e3892021112f21067d9ed1d04ae4182725ba52
6885 Author: Stefan Roese <sr@denx.de>
6886 Date: Mon Mar 31 12:20:48 2008 +0200
6888 ppc4xx: Small whitespace fix of esd patches
6890 Signed-off-by: Stefan Roese <sr@denx.de>
6892 commit 034394abb524785047c815f00dde8cdbdc1593c5
6893 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6894 Date: Sun Mar 30 18:52:44 2008 +0200
6896 ppc4xx: Cleanup PMC440 board support
6898 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6900 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
6901 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6902 Date: Sun Mar 30 18:52:06 2008 +0200
6904 ppc4xx: Add ptm configuration variables for PMC440
6906 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
6907 environment variables.
6909 Cleanup pci_target_init.
6911 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6913 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
6914 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6915 Date: Sun Mar 30 18:01:15 2008 +0200
6917 ppc4xx: Minor updates for DU440 boards
6919 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6921 commit d5bffeb868d6b4d462f558dac43011027b6644b7
6922 Author: Mike Frysinger <vapier@gentoo.org>
6923 Date: Tue Feb 19 00:54:20 2008 -0500
6925 Blackfin: cleanup and overhaul common board init functions
6927 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6929 commit b86b3416f874358acaf07519e7620cdb2145f75b
6930 Author: Mike Frysinger <vapier@gentoo.org>
6931 Date: Tue Feb 19 00:50:58 2008 -0500
6933 Blackfin: cleanup lib_blackfin/cache.c
6935 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6937 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
6938 Author: Mike Frysinger <vapier@gentoo.org>
6939 Date: Sun Mar 30 15:46:13 2008 -0400
6941 Blackfin: unify cpu and boot modes
6943 All of the duplicated code for Blackfin processors and boot modes have been
6944 unified. After all, the core is the same for all processors, just the
6945 peripheral set differs (which gets handled in the drivers).
6947 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6949 commit 880cc4381ea8360248cddcdf87a64566745a5724
6950 Author: Stelian Pop <stelian@popies.net>
6951 Date: Wed Mar 26 22:52:35 2008 +0100
6953 Fix CFG_NO_FLASH compilation.
6955 Many Atmel boards have no "real" (NOR) flash on board, and rely only
6956 on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
6957 be present in a board configuration file, while still enabling flash
6958 commands like 'flinfo', 'protect', etc.
6960 Signed-off-by: Stelian Pop <stelian@popies.net>
6962 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
6963 Author: Mike Frysinger <vapier@gentoo.org>
6964 Date: Tue Feb 19 00:58:13 2008 -0500
6966 Blackfin: BF537-stamp: cleanup spi flash driver
6968 This punts the old spi flash driver for a new/generalized one until the
6969 common one can be integrated.
6971 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6973 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
6974 Author: Ben Warren <biggerbadderben@gmail.com>
6975 Date: Sun Mar 30 11:34:34 2008 -0400
6977 Fix macro typo in common/cmd_mii.c
6979 This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
6980 actually applied the wrong patch.
6982 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6984 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
6985 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6986 Date: Sun Mar 30 16:39:53 2008 +0200
6988 use correct at91rm9200 register name in m501sk board
6990 This fixes a naming bug for at91rm9200 lowlevel init code:
6991 NOR boot flash is on chipselect 0, not chipselect 2. This
6992 makes code use the register name from chip datasheets.
6994 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6996 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
6997 Author: David Brownell <david-b@pacbell.net>
6998 Date: Fri Jan 18 12:55:00 2008 -0800
7000 use correct at91rm9200 register name
7002 This fixes a naming bug for at91rm9200 lowlevel init code:
7003 NOR boot flash is on chipselect 0, not chipselect 2. This
7004 makes code use the register name from chip datasheets.
7006 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
7008 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
7009 Author: David Brownell <david-b@pacbell.net>
7010 Date: Fri Jan 18 12:45:45 2008 -0800
7012 add missing ARM boards to MAKEALL
7014 Add some missing ARM boards to MAKEALL. These build correctly,
7015 unlike several of the boards already listed.
7017 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
7019 commit 066bebd6353e33af3adefc3404560871699e9961
7020 Author: Peter Pearse <peter.pearse@arm.com>
7021 Date: Sun Mar 30 11:34:09 2008 +0100
7023 Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
7024 to prevent compilation error.
7026 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
7028 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
7029 Author: Guennadi Liakhovetski <[lg@denx.de]>
7030 Date: Sun Mar 30 11:32:30 2008 +0100
7032 Support for the MX31ADS evaluation board from Freescale
7034 This patch adds support for the MX31ADS evaluation board from Freescale,
7035 initialization code is copied from RedBoot sources, also provided by Freescale.
7037 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7039 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
7040 Author: Sascha Hauer <s.hauer@pengutronix.de>
7041 Date: Sun Mar 30 11:32:27 2008 +0100
7043 Phytec Phycore-i.MX31 support
7045 This patch adds support for the Phytec Phycore-i.MX31 board
7047 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
7048 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7050 commit a147e56f03871bba4f05058d5e04ce7deb010b04
7051 Author: Sascha Hauer <s.hauer@pengutronix.de>
7052 Date: Sun Mar 30 11:32:24 2008 +0100
7054 mx31 litekit support
7056 This patch adds support for the mx31 litekit board
7058 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
7059 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7061 commit d6674e0e2a6a1f033945f78838566210d3f28c95
7062 Author: Sascha Hauer <s.hauer@pengutronix.de>
7063 Date: Sun Mar 30 11:32:21 2008 +0100
7065 add SMSC LAN9x1x Network driver
7067 This patch adds a driver for the following smsc network controllers:
7075 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
7076 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7078 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
7079 Author: Sascha Hauer <s.hauer@pengutronix.de>
7080 Date: Sun Mar 30 11:32:16 2008 +0100
7082 add an i2c driver for mx31
7084 This patch adds an i2c driver for Freescale i.MX processors
7086 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
7087 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7089 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
7090 Author: Sascha Hauer <s.hauer@pengutronix.de>
7091 Date: Sun Mar 30 11:30:43 2008 +0100
7093 core support for Freescale mx31
7095 This patch adds the core support for Freescale mx31
7097 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
7098 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7100 commit 8bf69d81782619187933a605f1a95ee1d069478d
7101 Author: Sascha Hauer <s.hauer@pengutronix.de>
7102 Date: Sun Mar 30 11:28:46 2008 +0100
7104 Separate omap24xx specific code from arm1136
7106 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
7108 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
7109 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
7111 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
7112 Author: Peter Pearse <peter.pearse@arm.com>
7113 Date: Sun Mar 30 11:23:05 2008 +0100
7115 Add pmdra into MAKEALL
7117 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
7119 commit a574a73852a527779234e73e17e7597fd8128882
7120 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
7121 Date: Sun Mar 30 11:21:58 2008 +0100
7123 Adds support for the Prodrive PMDRA board, based on a DM6441
7125 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
7127 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
7128 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
7129 Date: Sun Mar 30 11:11:34 2008 +0100
7131 Removes all board specific code from the arch. part for DM644x (DaVinci) boards
7133 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
7135 commit 1704dc20917b4f71e373e2c888497ee666d40380
7136 Author: Dirk Behme <dirk.behme@gmail.com>
7137 Date: Sun Mar 30 11:09:01 2008 +0100
7139 - Remove *_masked() functions as noted by Wolfgang
7140 - Adapt register naming to recent TI spec (sprue26, March 2007)
7141 - Fix reset_timer() handling
7142 - As reported by Pieter [1] the overflow fix introduced a
7143 delay of factor 16 (e.g 2 seconds became 32). While the
7144 overflow fix is basically okay, it missed to divide udelay by
7146 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
7147 - Remove software division of timer count value (DIV(x)
7148 macro) and do it in hardware (TIM_CLK_DIV).
7149 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
7150 and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
7151 the hints & testing!
7153 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
7155 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
7157 commit ac3315c26e143c31680750c9c13f027efbcc887e
7158 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
7159 Date: Thu Mar 6 16:45:44 2008 +0100
7161 new PHY @ e1000 - 2nd try
7163 Add 82541ER device with latest integrated IGP2 PHY.
7164 Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
7166 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
7167 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7169 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
7170 Author: Daniel Hellstrom <daniel@gaisler.com>
7171 Date: Fri Mar 28 20:22:53 2008 +0100
7173 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
7175 GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
7176 a debug link (EDCL). The GRETH core is documented in GRIP.pdf
7177 available at www.gaisler.com.
7179 If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
7180 offloading etc.) can be determined by a bit in the control register.
7181 The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
7183 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
7184 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7186 commit 233a8bcd94997f3f345833a3b82e836222f2a206
7187 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
7188 Date: Mon Mar 17 17:08:22 2008 -0500
7190 Add CONFIG_MII_INIT in cmd_mii.c
7192 Provide common configuration in do_mii() to execute mii_init()
7193 for all cpu architectures
7195 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7196 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7198 commit f605479de2deb11e834f31dfdb0af107c86aced6
7199 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
7200 Date: Mon Mar 17 17:08:16 2008 -0500
7202 ColdFire: Fix FEC transmit issue for MCF5275
7204 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7205 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7207 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
7208 Author: Aras Vaichas <arasv@magtech.com.au>
7209 Date: Wed Mar 26 09:43:57 2008 +1100
7211 DHCP request fix for Windows Server 2003
7213 Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
7214 delay before sending "DHCP Request" in net/bootp.c. Required to overcome
7215 interoperability problems with Windows Server 200x DHCP server when U-Boot
7216 client responds too fast for server to handle.
7218 Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
7219 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7221 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
7222 Author: Daniel Hellstrom <daniel@gaisler.com>
7223 Date: Fri Mar 28 20:40:19 2008 +0100
7225 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
7227 SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
7228 SPARC CPUs implement flash_read64 which calls __raw_readq.
7230 For current SPARC architectures (LEON2 and LEON3) each read from the
7231 FLASH must lead to a cache miss. This is because FLASH can not be set
7232 non-cacheable since program code resides there, and alternatively disabling
7233 cache is poor from performance view, or doing a cache flush between each
7234 read is even poorer.
7236 Forcing a cache miss on a SPARC is done by a special instruction "lda" -
7237 load alternative space, the alternative space number (ASI) is processor
7238 implementation spcific and can be found by including <asm/processor.h>.
7240 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
7242 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
7243 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
7244 Date: Fri Mar 28 15:41:25 2008 +0100
7246 Make MPC83xx one step closer to full relocation.
7248 Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
7249 and use GOT relative reference.
7251 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
7252 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7254 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
7255 Author: Michael Barkowski <michael.barkowski@freescale.com>
7256 Date: Thu Mar 27 14:34:43 2008 -0400
7258 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
7260 This patch fixes eeprom page size so that you can now write more than
7263 It also makes the board take MAC addresses, if found, from EEPROM.
7265 User should place up to 4 addresses at offset 0x7f00, for
7266 eth{,1,2,3}addr. Any unused addresses should be zero. This group of
7267 four six-byte values should have it's CRC at the end. crc32 and
7268 eeprom commands can be used to accomplish this.
7270 If CRC fails, MAC addresses come from the environment. If CRC
7271 succeeds, the environment is overwritten at startup.
7273 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
7274 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7276 commit 8f325cff31f6e745e6540014b131b9a97f61944c
7277 Author: Michael Barkowski <michael.barkowski@freescale.com>
7278 Date: Fri Mar 28 15:15:38 2008 -0400
7280 mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
7282 Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
7283 controller on the PCI bus in Linux on the MPC8323ERDB.
7285 This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
7288 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
7289 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7291 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
7292 Author: Kim Phillips <kim.phillips@freescale.com>
7293 Date: Fri Mar 28 10:19:07 2008 -0500
7295 mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
7297 in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
7298 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
7299 and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
7300 REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
7303 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7305 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
7306 Author: Kim Phillips <kim.phillips@freescale.com>
7307 Date: Fri Mar 28 10:18:53 2008 -0500
7309 mpc83xx: display ddr frequency in board_add_ram_info banner
7311 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7313 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
7314 Author: Kim Phillips <kim.phillips@freescale.com>
7315 Date: Fri Mar 28 10:18:40 2008 -0500
7317 mpc83xx: unreinvent mem_clk
7319 delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
7320 mem_*_clk for consistency's sake.
7322 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7324 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
7325 Author: Kim Phillips <kim.phillips@freescale.com>
7326 Date: Fri Mar 28 14:31:23 2008 -0500
7328 mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
7330 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7332 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
7333 Author: Dave Liu <r63238@freescale.com>
7334 Date: Wed Mar 26 22:57:19 2008 +0800
7336 mpc83xx: enable the SATA interface on mpc837xemds board
7338 Enable the first two SATA interfaces on MPC837xEMDS board,
7339 The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
7341 Signed-off-by: Dave Liu <daveliu@freescale.com>
7342 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7344 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
7345 Author: Dave Liu <r63238@freescale.com>
7346 Date: Wed Mar 26 22:56:36 2008 +0800
7348 mpc83xx: initialize serdes for MPC837xEMDS boards
7350 This patch is stolen from Anton Vorontsov's patch
7351 for mpc837xerdb boards.
7353 The reference clk and xcorevdd voltage of serdes1/2
7354 is same between mpc837xemds and mpc837xerdb.
7356 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
7357 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
7358 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
7360 Signed-off-by: Dave Liu <daveliu@freescale.com>
7361 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7363 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
7364 Author: Stefan Roese <sr@denx.de>
7365 Date: Fri Mar 28 14:09:04 2008 +0100
7367 ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
7369 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
7370 interface. This usage can be configured with the jumper J6. This patch
7371 displays the current configuration upon bootup and changes the PCIe
7372 init loop, to only initialize the availabel PCIe slots.
7374 Signed-off-by: Stefan Roese <sr@denx.de>
7376 commit 90447ecbbac8572457b6d8903073ac3f120995ba
7377 Author: Tor Krill <tor@excito.com>
7378 Date: Fri Mar 28 11:29:10 2008 +0100
7380 MTD/CFI: Add support for 16bit legacy AMD flash
7382 Add entry for 512Kx16 AMD flash to jedec_table.
7383 Read out 16bit device id if chipwidth is 16bit.
7384 Fixed coding style after Stefans feedback
7386 Signed-off-by: Tor Krill <tor@excito.com>
7388 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
7389 Author: Stefan Roese <sr@denx.de>
7390 Date: Fri Mar 28 11:02:53 2008 +0100
7392 ppc: Small change to CFG_MEM_TOP_HIDE description
7394 Signed-off-by: Stefan Roese <sr@denx.de>
7396 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
7397 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7398 Date: Thu Mar 27 15:44:12 2008 +0900
7400 sh: Add support stat structure and stat.h
7402 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7404 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
7405 Author: Mark Jonas <toertel@gmail.com>
7406 Date: Sat Mar 22 19:27:52 2008 +0100
7408 sh: Removed warning when compiling drivers/serial/serial_sh.c.
7410 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
7411 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7413 commit f309fa38929ffba71230c02330ffa42f4bba6333
7414 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7415 Date: Wed Mar 12 18:02:57 2008 +0900
7417 sh: Remove disable_ctrlc function from R7780MP
7419 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7421 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
7422 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7423 Date: Wed Mar 12 17:55:15 2008 +0900
7425 sh: Add maintainer of R7780MP to MAINTAINER file
7427 Update MAINTAINER entry for R7780MP. And fix maintainer's name.
7429 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7431 commit f5e2466f7baa887a7df0c536333eea8231333497
7432 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7433 Date: Tue Mar 25 17:11:24 2008 +0900
7435 sh: Add support Renesas Solutions R2D plus board
7437 R2D plus is SH reference board used with SH7751R.
7438 This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
7439 one PCI bus, VGA, and two Ethernet controller.
7441 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7443 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
7444 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7445 Date: Wed Mar 12 12:15:29 2008 +0900
7447 sh: Add support SH4 cache control
7449 Add support SH4 cache control and flash_cache function
7451 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7453 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
7454 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7455 Date: Mon Mar 24 01:53:01 2008 +0900
7457 sh: Add support PCI host driver for SH7751/SH7751R
7459 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7461 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
7462 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7463 Date: Mon Mar 24 02:11:26 2008 +0900
7465 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
7467 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7469 commit 566933278101c144d75361ea682678a326c1290d
7470 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7471 Date: Wed Mar 12 12:10:28 2008 +0900
7473 sh: Add support SuperH SH7751/SH7751R
7475 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7477 commit 3313e0e26224fc9a0c445124f3455058c696df84
7478 Author: Mark Jonas <toertel@gmail.com>
7479 Date: Mon Mar 10 11:37:10 2008 +0100
7481 sh: Added support for SH7720 based board MPR2.
7483 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
7484 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7486 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
7487 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7488 Date: Thu Mar 6 14:05:53 2008 +0900
7490 sh: Fix receive FIFO level register of SH4A
7492 Receive FIFO level register is different in SH4A.
7493 Because register is different, cannot occasionally receive data.
7495 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7497 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
7498 Author: Yusuke Goda <goda.yusuke@renesas.com>
7499 Date: Tue Mar 11 12:55:12 2008 +0900
7501 sh: Add support Renesas Solutions R7780MP
7503 Renesas Solutions R7780MP is a reference board on SH7780.
7504 This board has serial, 10/100 base Ethernet deivice, CF slot
7505 and VGA devices. This board can set extension board.
7506 Extension board has 10/100/1000 base Ethernet device, PCI slot,
7509 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
7510 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7512 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
7513 Author: Yusuke Goda <goda.yusuke@renesas.com>
7514 Date: Wed Mar 5 14:30:02 2008 +0900
7516 sh: Add support PCI of SuperH and SH7780
7518 This patch add support PCI of SuperH base code and SH7780 specific code.
7520 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
7521 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7523 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
7524 Author: Yusuke Goda <goda.yusuke@renesas.com>
7525 Date: Wed Mar 5 14:23:26 2008 +0900
7527 sh: Add support SH7780
7529 SH7780 is CPU of Renesas Technology.
7533 - DDR-SDRAM controller
7536 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
7537 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7539 commit c2042f5952a686c414031309b8f244513bf578f0
7540 Author: goda.yusuke <goda.yusuke@renesas.com>
7541 Date: Fri Jan 25 20:46:36 2008 +0900
7543 sh: Add support Renesas Solutions Migo-R board
7545 Migo-R is a board based on SH7722 and has may devices.
7546 In this patch, supported SCIF, NOR flash and Ethernet.
7548 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
7549 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7551 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
7552 Author: Bartlomiej Sieka <tur@semihalf.com>
7553 Date: Thu Mar 27 15:06:40 2008 +0100
7555 Fix host tool build breakage, take two
7557 Revert commit 87c8431f and fix build breakage so that the build continues
7558 to work on FC systems.
7560 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
7562 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
7563 Author: Stefan Roese <sr@denx.de>
7564 Date: Wed Mar 19 09:36:47 2008 +0100
7566 ppc4xx: Enable ECC on LWMON5
7568 Since all ECC related problems seem to be resolved on LWMON5, this patch
7569 now enables ECC support.
7571 We have to write the ECC bytes by zeroing and flushing in smaller
7572 steps, since the whole 256MByte takes too long for the external
7575 Signed-off-by: Stefan Roese <sr@denx.de>
7577 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
7578 Author: Larry Johnson <lrj@acm.org>
7579 Date: Mon Mar 17 11:10:35 2008 -0500
7581 ppc4xx: Updates to Korat-specific code
7583 This patch contains updates for changes for the Korat PPC440EPx board.
7584 These changes include:
7586 (1) Support for "permanent" and "upgradable" copies of U-Boot, as
7587 described in the new "doc/README.korat" file;
7589 (2) a new memory map for the registers in the board's CPLD;
7591 (3) a revised format for manufacturer's data in serial EEPROM; and
7593 (4) changes to track updates to U-Boot for the Sequoia board.
7595 Signed-off-by: Larry Johnson <lrj@acm.org>
7597 commit f766cdf89b3a2a7634b8c5869f606150e332036c
7598 Author: Markus Brunner <super.firetwister@gmail.com>
7599 Date: Thu Mar 27 10:46:25 2008 +0100
7601 ppc4xx: PPC405EP Set EMAC noise filter bits
7603 This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
7604 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
7605 disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
7607 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
7608 Signed-off-by: Stefan Roese <sr@denx.de>
7610 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
7611 Author: Mike Nuss <mike@terascala.com>
7612 Date: Wed Feb 20 11:54:20 2008 -0500
7614 ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
7616 On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
7617 after startup to change the speed of the clocks. This patch adds the
7618 option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
7619 initialization code will reconfigure the PLL to run the system with a CPU
7620 frequency of 667MHz and PLB frequency of 166MHz, without the need for an
7623 Signed-off-by: Mike Nuss <mike@terascala.com>
7624 Acked-by: Stefan Roese <sr@denx.de>
7626 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
7627 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7628 Date: Thu Mar 27 09:12:40 2008 +0100
7630 new-image: Fix host tool build breakage
7632 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7634 commit 6fb4b640562a10daff0dbe537638d511b5b48650
7635 Author: Stefan Roese <sr@denx.de>
7636 Date: Thu Mar 27 10:24:03 2008 +0100
7638 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
7640 Signed-off-by: Stefan Roese <sr@denx.de>
7642 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
7643 Author: Stefan Roese <sr@denx.de>
7644 Date: Wed Mar 19 10:23:43 2008 +0100
7646 ppc4xx: Add fdt support to Prodrive alpr
7648 Since this board will probably be ported to arch/powerpc in the
7649 near future, we add device tree support now. This way we are
7650 "ready" for arch/powerpc from now on.
7652 Signed-off-by: Stefan Roese <sr@denx.de>
7654 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
7655 Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
7656 Date: Mon Mar 17 09:27:56 2008 +0100
7658 ppc4xx: Enable cache support on the ALPR board
7660 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
7662 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
7663 Author: Stefan Roese <sr@denx.de>
7664 Date: Wed Mar 26 10:14:11 2008 +0100
7666 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
7668 If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
7669 memory area will get subtracted from the top (end) of ram and won't get
7670 "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
7671 should gets passed the now "corrected" memory size and won't touch it
7672 either. This should work for arch/ppc and arch/powerpc. Only Linux board
7673 ports in arch/powerpc with bootwrapper support, which recalculate the
7674 memory size from the SDRAM controller setup, will have to get fixed
7675 in Linux additionally.
7677 This patch enables this config option on some PPC440EPx boards as a workaround
7678 for the CHIP 11 errata. Here the description from the AMCC documentation:
7680 CHIP_11: End of memory range area restricted access.
7684 The 440EPx DDR controller does not acknowledge any
7685 transaction which is determined to be crossing over the
7686 end-of-memory-range boundary, even if the starting address is
7687 within valid memory space. Any such transaction from any PLB4
7688 master will result in a PLB time-out on PLB4 bus.
7691 In case of such misaligned bursts, PLB4 masters will not
7692 retrieve any data at all, just the available data up to the
7693 end of memory, especially the 440 CPU. For example, if a CPU
7694 instruction required an operand located in memory within the
7695 last 7 words of memory, the DCU master would burst read 8
7696 words to update the data cache and cross over the
7697 end-of-memory-range boundary. Such a DCU read would not be
7698 answered by the DDR controller, resulting in a PLB4 time-out
7699 and ultimately in a Machine Check interrupt. The data would
7700 be inaccessible to the CPU.
7703 Forbid any application to access the last 256 bytes of DDR
7704 memory. For example, make your operating system believe that
7705 the last 256 bytes of DDR memory are absent. AMCC has a patch
7706 that does this, available for Linux.
7708 This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
7709 lwmon5, korat, sequoia
7711 The other remaining 440EPx board were intentionally not included
7712 since it is not clear to me, if they use the end of ram for some
7713 other purpose. This is unclear, since these boards have CONFIG_PRAM
7714 defined and even comments like this:
7717 /* esd expects pram at end of physical memory.
7718 * So no logbuffer at the moment.
7721 It is strongly recommended to not use the last 256 bytes on those
7722 boards too. Patches from the board maintainers are welcome.
7724 Signed-off-by: Stefan Roese <sr@denx.de>
7726 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
7727 Author: Stefan Roese <sr@denx.de>
7728 Date: Thu Mar 27 10:09:05 2008 +0100
7730 ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
7732 Signed-off-by: Stefan Roese <sr@denx.de>
7734 commit d56a3ce179688cde61073a3690e21703d68fafd7
7735 Author: Stefan Roese <sr@denx.de>
7736 Date: Tue Mar 25 17:51:13 2008 +0100
7738 ppc4xx: Correctly pass phyiscal FLASH base address into dtb
7740 The routine ft_board_setup() configures the EBC NOR mappings for the
7741 Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
7742 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
7743 problem, we need to pass the corrected address here too.
7745 Signed-off-by: Stefan Roese <sr@denx.de>
7747 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
7748 Author: Stefan Roese <sr@denx.de>
7749 Date: Wed Mar 19 16:35:12 2008 +0100
7751 ppc4xx: Fix compilation warning in 4xx_enet.c
7753 Signed-off-by: Stefan Roese <sr@denx.de>
7755 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
7756 Author: Stefan Roese <sr@denx.de>
7757 Date: Wed Mar 19 16:20:49 2008 +0100
7759 ppc4xx: Add AMCC Glacier 406GT eval board support
7761 This patch adds support for the AMCC Glacier 460GT eval board.
7762 The main difference to the Canyonlands board are listed here:
7764 - 4 ethernet ports instead of 2
7768 Currently EMAC2+3 are not working. This will be fixed in a later
7771 Signed-off-by: Stefan Roese <sr@denx.de>
7773 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
7774 Author: Stefan Roese <sr@denx.de>
7775 Date: Thu Mar 27 08:47:26 2008 +0100
7777 ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
7779 Signed-off-by: Stefan Roese <sr@denx.de>
7781 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
7782 Author: Anatolij Gustschin <agust@denx.de>
7783 Date: Wed Mar 26 21:05:43 2008 +0100
7785 Fix out of tree building issue
7787 Currently U-Boot building in some external directory
7788 doesn't work. This patch tries to fix the problem.
7790 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7792 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
7793 Author: Anatolij Gustschin <agust@denx.de>
7794 Date: Wed Mar 26 18:13:33 2008 +0100
7796 README: update documentation (availability, links, etc.)
7800 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7802 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
7803 Author: Anatolij Gustschin <agust@denx.de>
7804 Date: Wed Mar 26 17:47:44 2008 +0100
7806 Fix compilation error in cmd_usb.c
7808 This patch fixes compilation error
7809 cmd_usb.c: In function 'do_usb':
7810 cmd_usb.c:552: error: void value not ignored as it ought to be
7812 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7814 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
7815 Author: Timur Tabi <timur@freescale.com>
7816 Date: Fri Mar 14 17:45:29 2008 -0500
7818 Add support for setting the I2C bus speed in fsl_i2c.c
7820 Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
7821 the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
7822 but fsl_i2c.c ignores it and uses conservative value when programming the
7825 Signed-off-by: Timur Tabi <timur@freescale.com>
7826 Acked-by: Andy Fleming <afleming@freescale.com>
7828 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
7829 Author: Wolfgang Denk <wd@denx.de>
7830 Date: Thu Mar 27 00:03:57 2008 +0100
7832 Coding style cleanup, update CHANGELOG
7834 Signed-off-by: Wolfgang Denk <wd@denx.de>
7836 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
7837 Author: Dave Liu <r63238@freescale.com>
7838 Date: Wed Mar 26 22:55:32 2008 +0800
7840 drivers: add the support for Freescale SATA controller
7842 Add the Freescale on-chip SATA controller driver to u-boot,
7843 The SATA controller is used on the 837x and 8315 targets,
7844 The driver can be used to load kernel, fs and dtb.
7847 - 1.5/3 Gbps link speed
7848 - LBA48, LBA28 support
7849 - DMA and FPDMA support
7852 Signed-off-by: Dave Liu <daveliu@freescale.com>
7854 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
7855 Author: Dave Liu <r63238@freescale.com>
7856 Date: Wed Mar 26 22:54:44 2008 +0800
7858 ata: add the readme for SATA command line
7860 Signed-off-by: Dave Liu <daveliu@freescale.com>
7862 commit cd54081cd479e542fc399b8a40651ff11a1ad849
7863 Author: Dave Liu <r63238@freescale.com>
7864 Date: Wed Mar 26 22:53:24 2008 +0800
7866 ata: enable the sata initialize on boot up
7868 Signed-off-by: Dave Liu <daveliu@freescale.com>
7870 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
7871 Author: Dave Liu <r63238@freescale.com>
7872 Date: Wed Mar 26 22:52:36 2008 +0800
7874 ata: add the fis struct for SATA
7876 Signed-off-by: Dave Liu <daveliu@freescale.com>
7878 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
7879 Author: Dave Liu <r63238@freescale.com>
7880 Date: Wed Mar 26 22:51:44 2008 +0800
7882 ata: add the libata support
7884 add simple libata support in u-boot
7886 Signed-off-by: Dave Liu <daveliu@freescale.com>
7888 commit 8e9bb43429e50df55fa41932cbe65841ff579220
7889 Author: Dave Liu <r63238@freescale.com>
7890 Date: Wed Mar 26 22:50:45 2008 +0800
7892 ata: make the ata_piix driver using new SATA framework
7894 original ata_piix driver is using IDE framework, not real
7895 SATA framework. For now, the ata_piix driver is only used
7896 by x86 sc520_cdp board. This patch makes the ata_piix driver
7897 use the new SATA framework, so
7899 - remove the duplicated command stuff
7900 - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
7901 - add the CONFIG_CMD_SATA define to sc520_cdp.h
7903 Signed-off-by: Dave Liu <daveliu@freescale.com>
7905 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
7906 Author: Dave Liu <r63238@freescale.com>
7907 Date: Wed Mar 26 22:49:44 2008 +0800
7909 ata: add the support for SATA framework
7911 - add the SATA framework
7912 - add the SATA command line
7914 Signed-off-by: Dave Liu <daveliu@freescale.com>
7916 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
7917 Author: Dave Liu <r63238@freescale.com>
7918 Date: Wed Mar 26 22:48:18 2008 +0800
7920 ata: merge the header of ata_piix driver
7922 move the sata.h from include/ to drivers/block/ata_piix.h
7924 Signed-off-by: Dave Liu <daveliu@freescale.com>
7926 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
7927 Author: Dave Liu <r63238@freescale.com>
7928 Date: Wed Mar 26 22:47:06 2008 +0800
7930 ata: merge the ata_piix driver
7932 move the cmd_sata.c from common/ to drivers/ata_piix.c,
7933 the cmd_sata.c have some part of ata_piix controller drivers.
7934 consolidate the driver to have better framework.
7936 Signed-off-by: Dave Liu <daveliu@freescale.com>
7938 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
7939 Author: Markus Klotzbuecher <mk@denx.de>
7940 Date: Wed Mar 26 18:26:43 2008 +0100
7942 USB, Storage: fix a bug introduced in commit
7943 f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
7944 to only print only information on one storage device, but not for
7947 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
7949 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
7950 Author: Anatolij Gustschin <agust@denx.de>
7951 Date: Wed Mar 26 17:47:44 2008 +0100
7953 Fix compilation error in cmd_usb.c
7955 This patch fixes compilation error
7956 cmd_usb.c: In function 'do_usb':
7957 cmd_usb.c:552: error: void value not ignored as it ought to be
7959 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7960 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
7962 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
7963 Author: Kumar Gala <galak@kernel.crashing.org>
7964 Date: Wed Mar 26 08:53:53 2008 -0500
7966 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
7968 Provide a board_lmb_reserve helper function to ensure we reserve
7969 the page of memory we are using for the boot page translation code.
7971 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7973 commit 79679d80021ab095e639e250ca472fe526da02e2
7974 Author: Kumar Gala <galak@kernel.crashing.org>
7975 Date: Wed Mar 26 08:34:25 2008 -0500
7977 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
7979 The following changes are needed to be inline with ePAPR v0.81:
7981 * r4, r5 and now always set to 0 on boot release
7982 * r7 is used to pass the size of the initial map area (IMA)
7983 * EPAPR_MAGIC value changed for book-e processors
7984 * changes in the spin table layout
7985 * spin table supports a 64-bit physical release address
7987 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7989 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
7990 Author: Jon Loeliger <jdl@freescale.com>
7991 Date: Wed Mar 19 15:02:07 2008 -0500
7993 FSL: Clean up board/freescale/common/Makefile
7995 Each file that can be built here now follows some
7996 CONFIG_ option so that they are appropriately built
7997 or not, as needed. And CONFIG_ defines were added
7998 to various board config files to make sure that happens.
8000 The other board/freescale/*/Makefiles no longer need
8001 to reach up and over into ../common to build their
8002 individually needed files any more.
8004 Boards that are CDS specific were renamed with cds_ prefix.
8006 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8008 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
8009 Author: Kumar Gala <galak@kernel.crashing.org>
8010 Date: Wed Feb 27 22:00:27 2008 -0600
8012 85xx: Fix merge duplication
8014 ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
8016 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8018 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
8019 Author: James Yang <James.Yang@freescale.com>
8020 Date: Tue Feb 12 16:35:07 2008 -0600
8022 85xx: Expand CCSR space with more DDR controller registers.
8024 Signed-off-by: James Yang <James.Yang@freescale.com>
8025 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8026 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8028 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
8029 Author: James Yang <James.Yang@freescale.com>
8030 Date: Fri Feb 8 18:05:08 2008 -0600
8032 85xx: Speed up get_ddr_freq() and get_bus_freq()
8034 get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
8035 called. However, get_sys_info() recalculates extraneous information when
8036 called each time. Have get_ddr_freq() and get_bus_freq() return memoized
8037 values from global_data instead.
8039 Signed-off-by: James Yang <James.Yang@freescale.com>
8040 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8042 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
8043 Author: James Yang <James.Yang@freescale.com>
8044 Date: Fri Feb 8 16:46:27 2008 -0600
8046 85xx: Show DDR memory data rate in addition to the memory clock frequency.
8048 Show the DDR memory data rate in addition to the memory clock
8049 frequency. For DDR/DDR2 memories the memory data rate is 2x the
8052 Signed-off-by: James Yang <James.Yang@freescale.com>
8053 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8055 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
8056 Author: James Yang <James.Yang@freescale.com>
8057 Date: Fri Feb 8 16:44:53 2008 -0600
8059 85xx: get_tbclk() speed up and rounding fix
8061 Speed up get_tbclk() by referencing pre-computed bus clock
8062 frequency value from global data instead of sys_info_t. Fix
8063 rounding of result to nearest; previously it was rounding
8066 Signed-off-by: James Yang <James.Yang@freescale.com>
8067 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8069 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
8070 Author: Andy Fleming <afleming@freescale.com>
8071 Date: Wed Feb 6 01:19:40 2008 -0600
8073 Update SVR numbers to expand support
8075 FSL has taken to using SVR[16:23] as an SOC sub-version field. This
8076 is used to distinguish certain variants within an SOC family. To
8077 account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
8078 constants to reflect the larger value. We also add SVR numbers for all
8079 of the current variants. Finally, to make things neater, rather than
8080 use an enormous switch statement to print out the CPU type, we create
8081 and array of SVR/name pairs (using a macro), and print out the CPU name
8082 that matches the SVR SOC version.
8084 Signed-off-by: Andy Fleming <afleming@freescale.com>
8086 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
8087 Author: Andy Fleming <afleming@freescale.com>
8088 Date: Wed Feb 6 01:12:57 2008 -0600
8090 Add the Freescale PCI device IDs
8092 Signed-off-by: Andy Fleming <afleming@freescale.com>
8094 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
8095 Author: Kumar Gala <galak@kernel.crashing.org>
8096 Date: Thu Feb 14 11:04:23 2008 -0600
8098 85xx: Added support for multicore boot mechanism
8100 Added the cpu command that provides a generic mechanism to get status,
8101 reset, and release secondary cores in multicore processors.
8103 Added support for using the ePAPR defined spin-table mechanism on 85xx.
8105 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8106 Signed-off-by: Andy Fleming <afleming@freescale.com>
8108 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
8109 Author: Kumar Gala <galak@kernel.crashing.org>
8110 Date: Thu Jan 17 16:48:33 2008 -0600
8112 85xx: Added support for multicore boot mechanism
8114 Added the cpu command that provides a generic mechanism to get status,
8115 reset, and release secondary cores in multicore processors.
8117 Added support for using the ePAPR defined spin-table mechanism on 85xx.
8119 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8121 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
8122 Author: Kumar Gala <galak@kernel.crashing.org>
8123 Date: Wed Jan 30 14:55:14 2008 -0600
8125 85xx: Add the concept of CFG_CCSRBAR_PHYS
8127 When we go to 36-bit physical addresses we need to keep the concept of
8128 the physical CCSRBAR address seperate from the virtual one.
8130 For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
8132 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8134 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
8135 Author: Wolfgang Denk <wd@denx.de>
8136 Date: Wed Mar 26 15:38:47 2008 +0100
8138 Coding style cleanup.
8140 Signed-off-by: Wolfgang Denk <wd@denx.de>
8142 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
8143 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
8144 Date: Wed Mar 26 13:02:13 2008 +0100
8146 Add CFG_RTC_DS1337_NOOSC to turn off OSC output
8148 The default settings for RTC DS1337 keeps the OSC
8149 output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
8152 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
8154 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
8155 Author: Wolfgang Denk <wd@denx.de>
8156 Date: Wed Mar 26 11:48:46 2008 +0100
8158 Cleanup coding style, update CHANGELOG
8160 Signed-off-by: Wolfgang Denk <wd@denx.de>
8162 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
8163 Author: Wolfgang Denk <wd@denx.de>
8164 Date: Wed Mar 26 10:40:12 2008 +0100
8166 README: update documentation (availability, links, etc.)
8168 Signed-off-by: Wolfgang Denk <wd@denx.de>
8170 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
8171 Author: Aras Vaichas <arasv@magtech.com.au>
8172 Date: Tue Mar 25 12:09:07 2008 +1100
8174 USB Storage, add meaningful return value
8176 This patch changes the "usb storage" command to return success if it
8177 finds a USB storage device, otherwise it returns error.
8179 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8181 commit 18e69a35efbb078403db0c0063986470dad7d082
8182 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8183 Date: Fri Mar 14 23:20:18 2008 +0300
8185 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
8187 Linux understands "host" (default), "peripheral" and "otg" (broken).
8188 Though, U-Boot doesn't restrict dr_mode variable to these values (think
8189 of renames in future).
8191 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8192 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8194 commit c7604783b236e368f225efb7b3efb418fe20b404
8195 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8196 Date: Fri Mar 14 23:20:30 2008 +0300
8198 tsec: fix link detection for the RTL8211B PHY
8200 RTL8211B sets link state register after autonegotiation complete,
8201 so with bootdelay=0 RTL8211B will report lack of the link.
8203 To fix this, we should wait for aneg to complete, even if the
8204 link is currently down.
8206 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8207 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8209 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
8210 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8211 Date: Mon Mar 24 20:47:09 2008 +0300
8213 mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
8215 device_type = "soc" is being deprecated, newer device trees will use
8216 "fsl,soc" and/or "fsl,immr" for the soc nodes.
8218 This patch also adds clock-frequency property for soc nodes (the same
8219 value as bus-frequency).
8221 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8223 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
8224 Author: Joe D'Abbraccio <ljd015@freescale.com>
8225 Date: Mon Mar 24 13:00:59 2008 -0400
8227 Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
8229 With the original value of 1/2 clock cycle delay, the system ran relatively
8230 stable except when we run benchmarks that are intensive users of memory.
8231 When I run samba connected disk with a HDBENCH test, the system locks-up
8232 or reboots sporadically.
8234 Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
8236 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
8237 Author: Scott Wood <scottwood@freescale.com>
8238 Date: Mon Mar 24 12:44:13 2008 -0500
8240 mpc83xx: Set PCI I/O bus-address base to zero.
8242 The device trees for these boards describe PCI I/O as starting from
8243 address zero from the device's perspective.
8245 Placing I/O elsewhere may cause problems with certain PCI boards, and may
8246 cause problems with Linux.
8248 Signed-off-by: Scott Wood <scottwood@freescale.com>
8250 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
8251 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8252 Date: Mon Mar 24 20:47:05 2008 +0300
8254 mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
8256 At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
8257 This patch fixes "system time drifting" problem.
8259 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8261 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
8262 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8263 Date: Mon Mar 24 20:47:02 2008 +0300
8265 mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
8267 This is needed to update /choosen/linux,stdout-path properly.
8269 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8271 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
8272 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8273 Date: Mon Mar 24 20:47:00 2008 +0300
8275 mpc83xx: MPC8360E-RDK: add dhcp command
8277 Plus modify environment to use it and remove bootfile env variable,
8278 it is internal and CONFIG_BOOTFILE is used for these purposes.
8280 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8282 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
8283 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8284 Date: Mon Mar 24 20:46:57 2008 +0300
8286 mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
8288 Current DDR setup easily causes memory corruption, this patch fixes it.
8290 Also fix TIMING_CFG0_MRS_CYC definition.
8292 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8294 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
8295 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8296 Date: Mon Mar 24 20:46:53 2008 +0300
8298 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
8300 This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
8301 controller and FHCI (QE USB).
8303 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8305 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
8306 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8307 Date: Mon Mar 24 20:46:51 2008 +0300
8309 mpc83xx: MPC8360E-RDK: add support for NAND
8311 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8313 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
8314 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8315 Date: Mon Mar 24 20:46:46 2008 +0300
8317 mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
8319 This is needed for BCM PHYs to work on this board.
8321 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8323 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
8324 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8325 Date: Mon Mar 24 20:46:34 2008 +0300
8327 uec: add support for Broadcom BCM5481 Gigabit PHY
8329 This patch adds basic support for Broadcom BCM5481 PHY.
8331 RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
8332 Peter Barada <peterb@logicpd.com>.
8334 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8336 commit 6a600c3a1876bc203445df4f0fd6b12648259666
8337 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8338 Date: Mon Mar 24 20:46:28 2008 +0300
8340 uec: add support for RGMII_RXID interface mode
8342 PHY drivers will use it to setup software delay between RXD and RXC
8345 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8347 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
8348 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8349 Date: Mon Mar 24 20:46:24 2008 +0300
8351 uec: add support for gbit mii status readings
8353 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8355 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
8356 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8357 Date: Mon Mar 24 17:40:47 2008 +0300
8359 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
8361 This is primarily for the early console support.
8363 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8365 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
8366 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8367 Date: Mon Mar 24 17:40:43 2008 +0300
8369 83xx: initialize serdes for MPC837XRDB boards
8371 On the MPC8377ERDB: 2 SATA and 2 PCI-E.
8372 On the MPC8378ERDB: 2 PCI-E
8373 On the MPC8379ERDB: 4 SATA
8375 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8377 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
8378 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8379 Date: Mon Mar 24 17:40:32 2008 +0300
8381 83xx: serdes setup routines
8383 This patch adds few routines to configure serdes on 837x targets.
8385 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8387 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
8388 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8389 Date: Mon Mar 24 17:40:27 2008 +0300
8391 83xx: split COBJS onto separate lines
8393 ..plus get rid of some #ifdefs in the .c files.
8395 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8397 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
8398 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8399 Date: Mon Mar 24 17:40:23 2008 +0300
8401 83xx: nand support for MPC837XRDB boards
8403 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
8405 commit 82e45a204190593e8613145a928f998fb8c909c4
8406 Author: Jerry Van Baren <gvb.uboot@gmail.com>
8407 Date: Tue Mar 18 21:44:41 2008 -0400
8409 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
8411 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
8412 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8414 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
8415 Author: Michael Barkowski <michael.barkowski@freescale.com>
8416 Date: Thu Mar 20 13:15:39 2008 -0400
8418 mpc8323erdb: remove RTC and add EEPROM
8420 There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
8422 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
8423 Acked-by: Kim Phillips <kim.phillips@freescale.com>
8425 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
8426 Author: Michael Barkowski <michael.barkowski@freescale.com>
8427 Date: Thu Mar 20 13:15:34 2008 -0400
8429 mpc8323erdb: Improve the system performance
8431 The following changes are based on kernel UCC ethernet performance:
8433 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
8434 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
8435 switch to enable this setting.
8437 The following changes are based on the App Note AN3369 and
8438 verified to improve memory latency using LMbench:
8440 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
8441 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
8443 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
8444 Twr=15ns, and this was already the setting in DDR_MODE)
8445 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
8447 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
8449 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
8451 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
8453 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
8455 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
8458 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
8459 Acked-by: Kim Phillips <kim.phillips@freescale.com>
8461 commit fc549c871f43933396a5b3e21d897023d4b31b8d
8462 Author: Michael Barkowski <michael.barkowski@freescale.com>
8463 Date: Thu Mar 20 13:15:28 2008 -0400
8465 mpc8323erdb: use readable DDR config macros
8467 Use available shift/mask macros to define DDR configuration.
8469 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
8470 Acked-by: Kim Phillips <kim.phillips@freescale.com>
8472 commit 89c7784ed90ba50301eec521144f95111e472906
8473 Author: Timur Tabi <timur@freescale.com>
8474 Date: Fri Feb 8 13:15:55 2008 -0600
8476 83xx: Add Vitesse VSC7385 firmware uploading
8478 Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
8479 the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
8480 Cleaned up the board header files to make selecting the VSC7385 easier to
8483 Signed-off-by: Timur Tabi <timur@freescale.com>
8484 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8486 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
8487 Author: Timur Tabi <timur@freescale.com>
8488 Date: Fri Feb 8 13:15:54 2008 -0600
8490 NET: Add Vitesse VSC7385 firmware uploading
8492 The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
8493 and other boards. A small firwmare must be uploaded to its on-board memory
8494 before it can be enabled. This patch adds the code which uploads firmware
8495 (but not the firmware itself).
8497 Previously, this feature was provided by a U-Boot application that was
8498 made available only on Freescale BSPs. The VSC7385 firmware must still
8499 be obtained separately, but at least there is no longer a need for a separate
8502 Signed-off-by: Timur Tabi <timur@freescale.com>
8503 Acked-by: Ben Warren <biggerbadderben@gmail.com>
8505 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
8506 Author: Wolfgang Denk <wd@denx.de>
8507 Date: Wed Mar 26 00:52:10 2008 +0100
8509 Coding Style cleanyp; update CHANGELOG
8511 Signed-off-by: Wolfgang Denk <wd@denx.de>
8513 commit 43ddd9c820fec44816188f53346b464e20b3142d
8514 Author: Jerry Van Baren <gvb.uboot@gmail.com>
8515 Date: Sat Mar 22 14:23:49 2008 -0400
8517 Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
8519 These defines embedded the u-boot env variables and/or the bd_t structure
8520 in the fdt blob. The conclusion of discussion on the u-boot email list
8521 was that embedding these in the fdt blob is not useful: there are better
8522 ways of passing the data (in fact, the fdt blob itself replaces the
8525 The only board that enables these is the stxxtc and they don't appear
8526 to be used by linux.
8528 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
8529 Acked-by: Kim Phillips <kim.phillips@freescale.com>
8531 commit 22ed2285743359fd1fe73e411dff914b2256e68f
8532 Author: Stefan Roese <sr@denx.de>
8533 Date: Mon Mar 17 10:49:25 2008 +0100
8535 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
8537 Signed-off-by: Stefan Roese <sr@denx.de>
8539 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
8540 Author: Kyungmin Park <kmpark@infradead.org>
8541 Date: Mon Mar 17 08:54:06 2008 +0900
8543 Add Flex-OneNAND booting support
8545 Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
8546 using a NOR Flash interface. This on-chip integration enables system designers
8547 to reduce external system logic and use high-density NAND Flash
8548 in applications that would otherwise have to use more NOR components.
8550 Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
8551 in more flexible way. While MLC area of Flex-OneNAND can be used to store data
8552 that require low reliability and high density, SLC area of Flex-OneNAND
8553 to store data that need high reliability and high performance. Flex-OneNAND
8554 can let users take advantage of storing these two different types of data
8555 into one chip, which is making Flex-OneNAND more cost- and space-effective.
8557 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8559 commit c512389cc4a10253249271ff6c887c6dab1f0db2
8560 Author: André Schwarz <andre.schwarz@matrix-vision.de>
8561 Date: Thu Mar 13 13:50:52 2008 +0100
8563 MPC5200: support setup without FEC
8565 Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
8566 defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
8568 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
8569 Acked-by: Grant Likely <grant.likely@secretlab.ca>
8571 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
8572 Author: Jon Loeliger <jdl@freescale.com>
8573 Date: Wed Mar 5 18:05:46 2008 -0600
8575 FSL: Move board/mpc8266ads under board/freescale
8577 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8579 commit 7f1d846e5c5754449c286587d099d85246062772
8580 Author: Jon Loeliger <jdl@freescale.com>
8581 Date: Wed Mar 5 18:05:47 2008 -0600
8583 FSL: Move board/mpc7448hpc2 under board/freescale
8585 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8587 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
8588 Author: Jon Loeliger <jdl@freescale.com>
8589 Date: Wed Mar 5 18:05:45 2008 -0600
8591 FSL: Move board/mpc8260ads under board/freescale
8593 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8595 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
8596 Author: goda.yusuke <goda.yusuke@renesas.com>
8597 Date: Wed Mar 5 17:08:33 2008 +0900
8599 net: Add support AX88796L ethernet device
8601 AX88796L is device of NE2000 compatible.
8602 This patch support AX88796L ethernet device.
8604 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
8605 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8607 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
8608 Author: Wolfgang Denk <wd@denx.de>
8609 Date: Tue Mar 25 22:50:41 2008 +0100
8611 ne2000 driver: change #ifdef to Makefile conditional compilation
8613 Signed-off-by: Wolfgang Denk <wd@denx.de>
8615 commit e710185aae90c64d39c2d453e40e58ceefe4f250
8616 Author: goda.yusuke <goda.yusuke@renesas.com>
8617 Date: Wed Mar 5 17:08:20 2008 +0900
8619 net: Divided code of NE2000 ethernet driver
8621 There are more devices of the NE2000 base.
8622 A present code is difficult for us to support more devices.
8623 To support more NE2000 clone devices, separated the function.
8625 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
8626 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8628 commit 395bce4f59a507a60a475f7ee46bed47de9482df
8629 Author: Mike Frysinger <vapier@gentoo.org>
8630 Date: Sun Feb 24 23:58:13 2008 -0500
8632 net/Blackfin: move on-chip MAC driver into drivers/net/
8634 The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
8635 directory, but it is not board specific, so relocate it to the drivers dir
8636 so that other Blackfin ports can utilize it.
8638 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8640 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
8641 Author: Mike Frysinger <vapier@gentoo.org>
8642 Date: Sun Feb 24 23:52:35 2008 -0500
8644 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
8646 Since the "ssync" instruction may have hardware anomalies associated with
8647 it, have the smc91111 driver use the SSYNC macro rather than invoking it
8648 directly. We workaround all the anomalies via this macro.
8650 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8652 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
8653 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
8654 Date: Sun Feb 17 22:57:47 2008 +0000
8656 8xx: Update OF support on 8xx
8658 This patch does some shifting around of OF support on 8xx.
8660 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
8662 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
8663 Author: Kumar Gala <galak@kernel.crashing.org>
8664 Date: Fri Feb 15 15:16:18 2008 -0600
8666 ppc: Allow boards to specify how much memory they can map
8668 For historical reasons we limited the stack to 256M because some boards
8669 could only map that much via BATS. However newer boards are capable of
8670 mapping more memory (for example 85xx is capble of doing up to 2G).
8672 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8674 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
8675 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
8676 Date: Fri Feb 15 01:05:58 2008 +0000
8678 8xx : Add OF support to Adder875 board port - resubmit
8680 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
8682 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
8683 Author: Kumar Gala <galak@kernel.crashing.org>
8684 Date: Thu Feb 14 20:44:42 2008 -0600
8688 Add a simple expr style command that will set an env variable as the result
8689 of the command. This allows us to do simple math in shell. The following
8690 operations are supported: &, |, ^, +, -, *, /.
8692 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8694 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
8695 Author: Jon Loeliger <jdl@freescale.com>
8696 Date: Wed Mar 5 17:27:48 2008 -0600
8698 FSL: Move board/mpc7448hpc2 under board/freescale
8700 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8702 commit 449c703374a8868453425e15da7e2f76221b72e4
8703 Author: Jon Loeliger <jdl@freescale.com>
8704 Date: Wed Mar 5 17:21:43 2008 -0600
8706 FSL: Move board/mpc8266ads under board/freescale
8708 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8710 commit 5863577989ad689427bb750107e9a75f1c1645d2
8711 Author: Jon Loeliger <jdl@freescale.com>
8712 Date: Wed Mar 5 16:41:41 2008 -0600
8714 FSL: Move board/mpc8260ads under board/freescale
8716 Signed-off-by: Jon Loeliger <jdl@freescale.com>
8718 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
8719 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8720 Date: Tue Mar 25 21:30:08 2008 +0900
8722 [MIPS] Move gth2_config from ARM section to MIPS
8724 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8726 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
8727 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8728 Date: Tue Mar 25 21:30:07 2008 +0900
8730 [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
8732 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8734 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
8735 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8736 Date: Tue Mar 25 21:30:07 2008 +0900
8738 [MIPS] Fix dcache_status()
8740 You can't judge UNCACHED by Config.K0 LSB.
8742 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8744 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
8745 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8746 Date: Tue Mar 25 21:30:07 2008 +0900
8748 [MIPS] Introduce _machine_restart
8750 Handles machine specific functions by using weak functions.
8752 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8754 commit decaba6f5cf386d569ac3997bebb871b966c6b18
8755 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8756 Date: Tue Mar 25 21:30:07 2008 +0900
8758 [MIPS] Cleanup CP0 Status initialization
8760 Add setup_c0_status from Linux. For the moment we disable interrupts, set
8761 CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
8762 reset-time configuration and will work well across most processors.
8764 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8766 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
8767 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8768 Date: Tue Mar 25 21:30:07 2008 +0900
8770 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
8772 Without this change, we'll be suffering from deffered WATCH exception
8773 once Status.EXL is cleared. Make sure Cause.WP is cleared.
8775 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8777 commit 26138623230ca2bad3c78e05a65527ea70c8b688
8778 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8779 Date: Tue Mar 25 21:30:07 2008 +0900
8781 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
8783 Move things to appropriate place.
8785 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8787 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
8788 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8789 Date: Tue Mar 25 21:30:06 2008 +0900
8791 [MIPS] Implement flush_cache()
8793 We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
8794 don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
8795 function is used not only in U-Boot specfic programs but also at loading
8798 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8800 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
8801 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8802 Date: Tue Mar 25 21:30:06 2008 +0900
8804 [MIPS] Fix I-/D-cache initialization loops
8806 Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
8807 again per a loop for I-cache initialization. But according to 'See MIPS
8808 Run', we're encouraged to use three separate loops rather than combining
8809 them *for both I- and D-cache*. This patch tries to fix this.
8811 In accordance with fixing above, mips_init_[id]cache are separated from
8812 mips_cache_reset(), and rewrite cache loops are completely rewritten with
8815 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8817 commit 1898840797c7f50799377bd5b285a8a93a82c419
8818 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8819 Date: Tue Mar 25 21:30:06 2008 +0900
8821 [MIPS] Replace memory clearance code with f_fill64
8823 This routine fills memory with zero by 64 bytes, and is 64-bit capable.
8825 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8827 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
8828 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8829 Date: Tue Mar 25 21:30:06 2008 +0900
8831 [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
8833 This patch replaces the current function definitions with NESTED, LEAF
8834 and END macro. They specify some more additional information about the
8835 function; an alignment of symbol, type of symbol, stack frame usage, etc.
8836 These information explicitly tells the assembler and the debugger about
8837 the types of code we want to generate.
8839 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8841 commit 282223a607c611425fa33f5428f8eae6636972bb
8842 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8843 Date: Tue Mar 25 11:43:17 2008 +0900
8845 [MIPS] asm headers' updates
8847 Make some asm headers adjusted to the latest Linux kernel.
8849 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8851 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
8852 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8853 Date: Tue Mar 25 11:39:29 2008 +0900
8855 [MIPS] Request for the 'mips_cache_lock()' removal
8857 The initial intension of having mips_cache_lock() was to use the cache
8858 as memory for temporary stack use so that a C environment can be set up
8859 as early as possible.
8861 But now mips_cache_lock() follow lowlevel_init(). We've already have the
8862 real memory initilaized at this point, therefore we could/should use it.
8863 No reason to lock at all.
8867 Cache locking is not consistent across MIPS implementaions. Some imple-
8868 mentations don't support locking at all. The style of locking varies -
8869 some support per line locking, others per way, etc. Some parts use bits
8870 in status registers instead of cache ops. Current mips_cache_lock() is
8871 not necessarily general-purpose.
8873 And this is worthy of special mention; once U-Boot/MIPS locks the lines,
8874 they are never get unlocked, so the code relies on whatever gets loaded
8875 after U-Boot to re-initialize the cache and clear the locks. We're sup-
8876 posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
8877 but leave the situation as it is for a long time.
8879 For these reasons, I proposed the removal of mips_cache_lock() from the
8880 global start-up code.
8882 This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
8883 *things have changed*. If he wants the same behavior as before, he needs
8884 to have CFG_INIT_RAM_LOCK_MIPS in his config file.
8886 If we don't have any regression report through several releases, then
8887 we'll remove codes entirely.
8889 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8890 Acked-by: Andrew Dyer <amdyer@gmail.com>
8892 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
8893 Author: Yuri Tikhonov <yur@emcraft.com>
8894 Date: Mon Mar 24 11:30:54 2008 +0100
8896 lwmon5 SYSMON POST: fix backlight control
8898 If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
8899 run on the board, then the SYSMON POST controls the display backlight
8900 (doesn't switch backlight ON if POST FAILED, and does switch the
8901 backlight ON if PASSED).
8903 If not, then the video driver controls the display backlight (just
8904 switch ON the backlight upon initialization).
8906 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
8908 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
8909 Author: Yuri Tikhonov <yur@emcraft.com>
8910 Date: Mon Mar 24 11:29:14 2008 +0100
8912 lwmon5 SYSMON POST: fix handling of negative temperatures
8914 Fix errors in the LWMON5 Sysmon POST for negative temperatures.
8916 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
8918 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
8919 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8920 Date: Fri Mar 7 16:04:25 2008 +0900
8922 pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
8924 In current source code, when the device number of PCI is 0, process PCI
8925 bridge without fail. However, when the device number is 0, it is not PCI
8926 always bridge. There are times when device of PCI allocates.
8928 When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
8931 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8932 Acked-by: Stefan Roese <sr@denx.de>
8934 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
8935 Author: Yuri Tikhonov <yur@emcraft.com>
8936 Date: Fri Mar 21 09:18:40 2008 +0100
8938 LWMON5: fix dsPIC POST
8940 Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
8942 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
8944 commit 388b82fddc7c05596f3f615f190da0448227dc82
8945 Author: Bartlomiej Sieka <tur@semihalf.com>
8946 Date: Thu Mar 20 23:23:13 2008 +0100
8948 [new uImage] Enable new uImage support for the pcs440ep board.
8950 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8952 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
8953 Author: Bartlomiej Sieka <tur@semihalf.com>
8954 Date: Thu Mar 20 23:23:13 2008 +0100
8956 [new uImage] Do not compile new uImage format support by default
8958 Disable default building of new uImage format support in preparation
8959 for merge with the master. Support for new format can be enabled on
8960 a per-board basis, by defining the following in the board's config file:
8962 #define CONFIG_FIT 1
8963 #define CONFIG_OF_LIBFDT 1
8965 This can be optionally defined to give more verbose output:
8967 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
8969 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8971 commit dafaede8a46c7159310239e036c93e31c6374487
8972 Author: Bartlomiej Sieka <tur@semihalf.com>
8973 Date: Thu Mar 20 23:20:31 2008 +0100
8975 [new uImage] Disable debuging output in preparation for merge with master
8977 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8979 commit fbe7a155027beacebaee9b32e1ada781fe924bca
8980 Author: Bartlomiej Sieka <tur@semihalf.com>
8981 Date: Thu Mar 20 19:38:45 2008 +0100
8983 [new uImage] Compilation and new uImage handling fixes for imxtract
8985 Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
8986 include/config_cmd_default.h. Fix few warnings and handling of new format
8989 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8991 commit 36cc8cbb3379d5166f882641123521735c469f92
8992 Author: Bartlomiej Sieka <tur@semihalf.com>
8993 Date: Thu Mar 20 23:10:19 2008 +0100
8995 [new uImage] Fix autoscr command used with new uImage format
8997 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
8999 commit 43142e817f0597be412e7cbe19413f5532eafa5d
9000 Author: Bartlomiej Sieka <tur@semihalf.com>
9001 Date: Thu Mar 20 23:10:19 2008 +0100
9003 [new uImage] Fix *.its files location in documentation
9005 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9007 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
9008 Author: Wolfgang Denk <wd@denx.de>
9009 Date: Thu Mar 20 22:01:38 2008 +0100
9011 lwmon5 POST: remove unreachable code
9013 plus some coding style cleanup
9015 Signed-off-by: Wolfgang Denk <wd@denx.de>
9017 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
9018 Author: Yuri Tikhonov <yur@emcraft.com>
9019 Date: Thu Mar 20 17:56:04 2008 +0300
9021 LWMON5: POST RTC fix
9023 Modify the RTC API to provide one a status for the time reported by
9024 the rtc_get() function:
9025 0 - a reliable time is guaranteed,
9026 < 0 - a reliable time isn't guaranteed (power fault, clock issues,
9029 The RTC chip drivers are responsible for providing this info if the
9030 corresponding chip supports such functionality. If not - always
9031 report that the time is reliable.
9033 The POST RTC test was modified to detect the RTC faults utilizing
9034 this new rtc_get() feature.
9036 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9038 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
9039 Author: Martin Krause <martin.krause@tqs.de>
9040 Date: Wed Mar 19 14:25:14 2008 +0100
9042 TQM5200B: update MTD partition layout
9044 - insert partition for dtb blob to TQM5200B MTD layout
9045 - set env variables dependent on the configured board
9046 (TQM5200 or TQM5200B)
9048 Signed-off-by: Martin Krause <martin.krause@tqs.de>
9050 commit f0105727d132f56a21fa3ed8b162309cca6cac44
9051 Author: Stefan Roese <sr@denx.de>
9052 Date: Wed Mar 19 07:09:26 2008 +0100
9054 CFI: Small cleanup for FLASH_SHOW_PROGRESS
9056 With this patch we don't need that many #ifdef's in the code. It moves
9057 the subtraction into the macro and defines a NOP-macro when
9058 CONFIG_FLASH_SHOW_PROGRESS is not defined.
9060 Signed-off-by: Stefan Roese <sr@denx.de>
9061 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
9063 commit 9a042e9ca512beaaa2cb450274313fc477141241
9064 Author: Jerry Van Baren <gvb.uboot@gmail.com>
9065 Date: Sat Mar 8 13:48:01 2008 -0500
9067 Flash programming progress countdown.
9069 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
9071 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
9072 Author: Bartlomiej Sieka <tur@semihalf.com>
9073 Date: Wed Mar 19 10:00:06 2008 +0100
9075 [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
9077 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9079 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
9080 Author: David Gibson <david@gibson.dropbear.id.au>
9081 Date: Mon Feb 18 18:09:04 2008 +1100
9083 libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
9085 Since fdt_node_offset_by_compatible() was converted to the new
9086 fdt_next_node() iterator, a chunk of initialization code became
9087 redundant, but was not removed by oversight. This patch cleans it up.
9089 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9091 commit d0ccb9b140b472039732de102fc14597eedb14df
9092 Author: David Gibson <david@gibson.dropbear.id.au>
9093 Date: Mon Feb 18 18:06:31 2008 +1100
9095 libfdt: Trivial cleanup for CHECK_HEADER)
9097 Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
9098 However, there are a handful of functions (fdt_move, rw_check_header,
9099 fdt_open_into) from other files which could also use it (currently
9100 they open-code something more-or-less identical). Therefore, this
9101 patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
9104 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9106 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
9107 Author: Kumar Gala <galak@kernel.crashing.org>
9108 Date: Wed Feb 20 14:32:36 2008 -0600
9110 Fix fdt boardsetup command parsing
9112 The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
9114 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9116 commit 804887e6001e2f00bea11431bf34d6d472512cda
9117 Author: Kumar Gala <galak@kernel.crashing.org>
9118 Date: Fri Feb 15 03:34:36 2008 -0600
9120 Add sub-commands to fdt
9122 fdt header - Display header info
9123 fdt bootcpu <id> - Set boot cpuid
9124 fdt memory <addr> <size> - Add/Update memory node
9125 fdt rsvmem print - Show current mem reserves
9126 fdt rsvmem add <addr> <size> - Add a mem reserve
9127 fdt rsvmem delete <index> - Delete a mem reserves
9129 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9131 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
9132 Author: David Gibson <david@gibson.dropbear.id.au>
9133 Date: Thu Feb 14 16:50:34 2008 +1100
9135 libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
9137 fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
9138 node which has NOP tags interspersed with its properties. In this
9139 case fdt_add_subnode_namelen() will put the new subnode before the
9140 first NOP tag, even if there are properties after it, which will
9141 result in an invalid blob.
9143 This patch fixes the bug, and adds a testcase for it.
9145 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9147 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
9148 Author: David Gibson <david@gibson.dropbear.id.au>
9149 Date: Tue Feb 12 11:58:31 2008 +1100
9151 libfdt: Add and use a node iteration helper function.
9153 This patch adds an fdt_next_node() function which can be used to
9154 iterate through nodes of the tree while keeping track of depth. This
9155 function is used to simplify the iteration code in a lot of other
9156 functions, and is also exported for use by library users.
9158 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9160 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
9161 Author: David Gibson <david@gibson.dropbear.id.au>
9162 Date: Fri Jan 11 14:55:05 2008 +1100
9164 libfdt: Add fdt_set_name() function
9166 This patch adds an fdt_set_name() function to libfdt, mirroring
9167 fdt_get_name(). This is a r/w function which alters the name of a
9168 given device tree node.
9170 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
9172 commit 23e20aa6488e6c0622496549861bfdc74108debe
9173 Author: Yuri Tikhonov <yur@pollux.denx.de>
9174 Date: Tue Mar 18 13:33:30 2008 +0100
9176 lwmon5: Fix register test logic to match the specific GDC h/w.
9178 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9179 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9181 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
9182 Author: Yuri Tikhonov <yur@pollux.denx.de>
9183 Date: Tue Mar 18 13:27:57 2008 +0100
9185 Fix backlight in the lwmon5 POST.
9187 Backlight was switched on even when temperature was too low.
9189 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9190 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9192 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
9193 Author: Yuri Tikhonov <yur@pollux.denx.de>
9194 Date: Wed Feb 6 18:48:36 2008 +0100
9196 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
9198 To enable this, alternative, configuration the U-Boot board configuration
9199 file for lwmon5 includes the definitions of alternative addresses for header
9200 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
9202 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
9203 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
9204 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
9206 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9208 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
9209 Author: Yuri Tikhonov <yur@pollux.denx.de>
9210 Date: Mon Feb 4 17:11:53 2008 +0100
9212 Add support for the lwmon5 board reset via GPIO58.
9214 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9215 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9217 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
9218 Author: Yuri Tikhonov <yur@pollux.denx.de>
9219 Date: Mon Feb 4 17:09:55 2008 +0100
9221 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
9223 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9224 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9226 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
9227 Author: Yuri Tikhonov <yur@pollux.denx.de>
9228 Date: Mon Feb 4 14:11:03 2008 +0100
9230 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
9232 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9233 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9235 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
9236 Author: Yuri Tikhonov <yur@pollux.denx.de>
9237 Date: Mon Feb 4 14:10:42 2008 +0100
9239 The patch adds new POST tests for the Lwmon5 board. These are:
9241 * External Watchdog test;
9247 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9248 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9250 commit c2ed33efbfff5767bca236828e021c55fd547b6c
9251 Author: Yuri Tikhonov <yur@pollux.denx.de>
9252 Date: Mon Feb 4 14:10:01 2008 +0100
9254 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
9256 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9258 commit 3a5d1e7f1309998791702b2a559e3126781746b9
9259 Author: Yuri Tikhonov <yur@pollux.denx.de>
9260 Date: Tue Mar 18 13:33:30 2008 +0100
9262 lwmon5: Fix register test logic to match the specific GDC h/w.
9264 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9265 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9267 commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
9268 Author: Yuri Tikhonov <yur@pollux.denx.de>
9269 Date: Tue Mar 18 13:27:57 2008 +0100
9271 Fix backlight in the lwmon5 POST.
9273 Backlight was switcehd on even when temperature was too low.
9275 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9276 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9278 commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
9279 Author: Yuri Tikhonov <yur@pollux.denx.de>
9280 Date: Wed Feb 6 18:48:36 2008 +0100
9282 The patch introduces the alternative configuration of the log buffer for
9283 the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
9284 the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
9285 PPC440EPX_GPT0_COMP5).
9287 To enable this, alternative, configuration the U-Boot board configuration
9288 file for lwmon5 includes the definitions of alternative addresses for header
9289 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
9291 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
9292 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
9293 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
9295 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9297 commit ff818b21b069f4bc9cb73373cc5a16014be101b7
9298 Author: Yuri Tikhonov <yur@pollux.denx.de>
9299 Date: Mon Feb 4 17:11:53 2008 +0100
9301 Add support for the lwmon5 board reset via GPIO58.
9303 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9304 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9306 commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
9307 Author: Yuri Tikhonov <yur@pollux.denx.de>
9308 Date: Mon Feb 4 17:09:55 2008 +0100
9310 Some fixes to dspic, fpga, and gdc post tests for lwmon5.
9311 Disable external watch-dog for now.
9313 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9314 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9316 commit e262efe35742c1ad4b0966ff501efc26f34a0aec
9317 Author: Yuri Tikhonov <yur@pollux.denx.de>
9318 Date: Mon Feb 4 14:11:03 2008 +0100
9320 The patch introduces the CRITICAL feature of POST tests. If the test
9321 marked as POST_CRITICAL fails then the alternative, post_critical,
9322 boot-command is used. If this command is not defined then U-Boot
9323 enters into interactive mode.
9325 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9326 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9328 commit 65b20dcefc89618193fa51947968dada91e4c778
9329 Author: Yuri Tikhonov <yur@pollux.denx.de>
9330 Date: Mon Feb 4 14:10:42 2008 +0100
9332 The patch adds new POST tests for the Lwmon5 board.
9335 * External Watchdog test;
9341 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9342 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9344 commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
9345 Author: Yuri Tikhonov <yur@pollux.denx.de>
9346 Date: Mon Feb 4 14:10:01 2008 +0100
9348 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
9350 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
9352 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
9353 Author: Wolfgang Denk <wd@denx.de>
9354 Date: Tue Mar 18 17:35:51 2008 +0100
9356 HMI1001: fix compile problem.
9358 Signed-off-by: Wolfgang Denk <wd@denx.de>
9360 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
9361 Author: Mike Frysinger <vapier@gentoo.org>
9362 Date: Mon Feb 18 05:32:30 2008 -0500
9364 Blackfin: BF537-stamp: drop board-specific flash driver for CFI
9366 The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
9367 for the board specific driver at all. Just use the common CFI driver.
9369 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9371 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
9372 Author: Mike Frysinger <vapier@gentoo.org>
9373 Date: Tue Feb 19 00:36:14 2008 -0500
9375 Blackfin: add proper ELF markings to some assembly functions
9377 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9379 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
9380 Author: Mike Frysinger <vapier@gentoo.org>
9381 Date: Tue Feb 19 00:35:17 2008 -0500
9383 Blackfin: new cplbinfo command for viewing cplb tables
9385 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9387 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
9388 Author: Mike Frysinger <vapier@gentoo.org>
9389 Date: Mon Feb 18 05:37:51 2008 -0500
9391 Blackfin: update MAINTAINERS list
9393 Add maintainer information for the Blackfin boards.
9395 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9397 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
9398 Author: Mike Frysinger <vapier@gentoo.org>
9399 Date: Mon Feb 18 05:26:48 2008 -0500
9401 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
9403 Stop tying things to the processor that should be tied to other defines and
9404 change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
9405 system to select the -mcpu option.
9407 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9409 commit 86a20fb920bd198105acf7b1191117f566d637ed
9410 Author: Mike Frysinger <vapier@gentoo.org>
9411 Date: Sat Feb 16 07:40:36 2008 -0500
9413 Blackfin: move bootldr command to common code
9415 This moves the Blackfin-common bootldr command out of the BF537-STAMP
9416 specific board directory and into the common directory so that all Blackfin
9417 boards may utilize it.
9419 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9421 commit decbe029b2a9d3333d02c433389b1c821eea96d7
9422 Author: Heiko Schocher <hs@denx.de>
9423 Date: Fri Mar 14 11:05:20 2008 +0100
9425 mgcoge: update configuration
9427 Fix configuration for mgcoge board
9429 Signed-off-by: Heiko Schocher <hs@denx.de>
9431 commit c136724cda0219c49f1d4b346f00da29b14fdf14
9432 Author: Wolfgang Denk <wd@denx.de>
9433 Date: Sun Mar 16 01:22:59 2008 +0100
9435 drivers/rtc/Makefile: keep list sorted
9437 Signed-off-by: Wolfgang Denk <wd@denx.de>
9439 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
9440 Author: Tor Krill <tor@excito.com>
9441 Date: Sat Mar 15 15:40:26 2008 +0100
9443 Add support for Intersil isl1208 RTC
9445 Signed-off-by: Tor Krill <tor@excito.com>
9447 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
9448 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9449 Date: Sat Mar 15 17:36:41 2008 +0100
9453 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9455 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
9456 Author: Wolfgang Denk <wd@denx.de>
9457 Date: Sun Mar 16 01:12:58 2008 +0100
9459 Conding style cleanup
9461 Signed-off-by: Wolfgang Denk <wd@denx.de>
9463 commit 41712b4e8c95dff23354bcd620e1f9477160c190
9464 Author: Stefan Roese <sr@denx.de>
9465 Date: Wed Mar 5 12:31:53 2008 +0100
9467 ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
9469 This patch adds USB OHCI support to the Canyonlands board port. It also
9470 enables EXT2 support.
9472 Signed-off-by: Stefan Roese <sr@denx.de>
9474 commit 2596f5b9d353ff3e4387a3325d05740f16958038
9475 Author: Stefan Roese <sr@denx.de>
9476 Date: Wed Mar 5 12:29:32 2008 +0100
9478 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
9480 This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
9481 way a board just needs to define this new option to enable the "force
9482 NoPowerSwitching mode" instead of adding new CPU/architecture defines
9483 to the USB source itself.
9485 This new option will be used first with the new AMCC 460EX Canyonlands
9486 board port, which will be posted in a few days.
9488 This patch also fixes a small compilation problem when DEBUG is enabled.
9490 Signed-off-by: Stefan Roese <sr@denx.de>
9492 commit 71665ebf88408ff2acb762af47989fd4365b321a
9493 Author: Stefan Roese <sr@denx.de>
9494 Date: Mon Mar 3 17:27:02 2008 +0100
9496 ppc4xx: Add Canyonlands NAND booting support
9498 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
9499 NAND devices. The only bootstrap option for NAND booting is option F for
9500 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
9501 EEPROM needs to be programmed accordingly.
9503 This patch adds basic NAND booting support for the AMCC Canyonlands aval
9504 board and also adds support to the "bootstrap" command, to enable NAND
9505 booting I2C setting.
9507 Tested with 512 byte page NAND device (32MByte) on Canyonlands.
9509 Signed-off-by: Stefan Roese <sr@denx.de>
9511 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
9512 Author: Stefan Roese <sr@denx.de>
9513 Date: Tue Mar 11 16:53:00 2008 +0100
9515 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
9517 This patch adds support for the AMCC Canyonlands 460EX evaluation
9520 Signed-off-by: Stefan Roese <sr@denx.de>
9522 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
9523 Author: Stefan Roese <sr@denx.de>
9524 Date: Tue Mar 11 16:52:24 2008 +0100
9526 ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
9528 This patch adds support for the AMCC Canyonlands 460EX evaluation
9531 Signed-off-by: Stefan Roese <sr@denx.de>
9533 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
9534 Author: Stefan Roese <sr@denx.de>
9535 Date: Tue Mar 11 16:51:17 2008 +0100
9537 ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
9539 This patch adds support for the AMCC Canyonlands 460EX evaluation
9542 Signed-off-by: Stefan Roese <sr@denx.de>
9544 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
9545 Author: Stefan Roese <sr@denx.de>
9546 Date: Tue Mar 11 15:11:43 2008 +0100
9548 ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
9550 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9552 Signed-off-by: Stefan Roese <sr@denx.de>
9554 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
9555 Author: Stefan Roese <sr@denx.de>
9556 Date: Tue Mar 11 15:11:18 2008 +0100
9558 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
9560 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9562 Signed-off-by: Stefan Roese <sr@denx.de>
9564 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
9565 Author: Stefan Roese <sr@denx.de>
9566 Date: Tue Mar 11 15:07:10 2008 +0100
9568 ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
9570 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9572 Signed-off-by: Stefan Roese <sr@denx.de>
9574 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
9575 Author: Stefan Roese <sr@denx.de>
9576 Date: Tue Mar 11 15:05:50 2008 +0100
9578 ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
9580 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9582 Signed-off-by: Stefan Roese <sr@denx.de>
9584 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
9585 Author: Stefan Roese <sr@denx.de>
9586 Date: Tue Mar 11 15:05:26 2008 +0100
9588 ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
9590 This patch adds basic support for the AMCC 460EX/460GT PPC's.
9592 Signed-off-by: Stefan Roese <sr@denx.de>
9594 commit 56e410178375d9f20be25fb24e180974f0ae120b
9595 Author: Stefan Roese <sr@denx.de>
9596 Date: Tue Feb 19 22:07:57 2008 +0100
9598 ppc4xx: interrupt.c reworked
9600 This patch is a rework of the 4xx interrupt handling done while
9601 adding the 460EX/GT support. Interrupts are needed on 4xx for the
9604 Signed-off-by: Stefan Roese <sr@denx.de>
9606 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
9607 Author: Stefan Roese <sr@denx.de>
9608 Date: Tue Feb 19 22:01:57 2008 +0100
9610 ppc4xx: program_tlb now uses 64bit physical addess
9612 This patch changes the physical addess parameter from 32bit to 64bit.
9613 This is needed for 36bit 4xx platforms to access areas located
9614 beyond the 4GB border, like SoC peripherals (EBC etc.).
9616 Signed-off-by: Stefan Roese <sr@denx.de>
9618 commit c3307fa186af85771924c434997089b8104c0a46
9619 Author: Stefan Roese <sr@denx.de>
9620 Date: Tue Feb 19 21:58:25 2008 +0100
9622 ppc4xx: miiphy.c reworked
9624 While adding the 460EX/GT support I reworked the 4xx miiphy code. It
9625 badly neede some cleanup.
9627 Signed-off-by: Stefan Roese <sr@denx.de>
9629 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
9630 Author: Stefan Roese <sr@denx.de>
9631 Date: Tue Feb 19 16:21:49 2008 +0100
9633 rtc: Add M41T62 support
9635 This patch add support for the STM M41T62 RTC. It is used and tested
9636 on the AMCC Canyonlands 406EX platform.
9638 Signed-off-by: Stefan Roese <sr@denx.de>
9640 commit 217d383e201adc7f2271145ae345ea5eae2b7170
9641 Author: Niklaus Giger <niklaus.giger@netstal.com>
9642 Date: Mon Feb 25 18:46:43 2008 +0100
9644 ppc4xx: Add 405GPr based MCU25 board specific files
9646 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
9648 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
9649 Author: Niklaus Giger <niklaus.giger@netstal.com>
9650 Date: Mon Feb 25 18:46:42 2008 +0100
9652 ppc4xx: Add 405GPr based MCU25 board config file
9654 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
9656 commit b05f35436b733a240559e77e46bed8439665ecc5
9657 Author: Niklaus Giger <niklaus.giger@netstal.com>
9658 Date: Mon Feb 25 18:46:41 2008 +0100
9660 ppc4xx: Add 405GPr based MCU25 board. Global files
9662 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
9664 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
9665 Author: Niklaus Giger <niklaus.giger@netstal.com>
9666 Date: Mon Feb 25 18:37:02 2008 +0100
9668 ppc4xx: HCU4/5. remove obsolete hcu_flash.c
9670 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
9672 commit a079494853cc2bfeddb26673219db0b4b2b31566
9673 Author: Niklaus Giger <niklaus.giger@netstal.com>
9674 Date: Mon Feb 25 18:37:01 2008 +0100
9676 ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
9678 Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
9679 the FLASH_CFI_LEGACY et al. config options.
9681 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
9683 commit e4170e5a50c8110f792bc37472833ae669d69951
9684 Author: Stefan Roese <sr@denx.de>
9685 Date: Tue Mar 11 13:52:25 2008 +0100
9687 ppc4xx: Fix comment in 405EX DDR2 init code
9689 Signed-off-by: Stefan Roese <sr@denx.de>
9691 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
9692 Author: Bartlomiej Sieka <tur@semihalf.com>
9693 Date: Fri Mar 14 16:22:34 2008 +0100
9695 Add MD5 support to the new uImage format
9697 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9699 commit 0ede0c383530a418cf98be9122371a86573cd0db
9700 Author: Bartlomiej Sieka <tur@semihalf.com>
9701 Date: Fri Mar 14 16:22:34 2008 +0100
9703 Add the MD5 algorithm
9705 MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
9706 calculated using the md5() function -- see include/md5.h for details.
9708 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9710 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
9711 Author: Wolfgang Denk <wd@denx.de>
9712 Date: Fri Mar 14 16:04:54 2008 +0100
9714 tools/setlocalversion: use a git-describe-ish format
9716 Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
9717 where 'nnnnn' is the number of commits since the last tag (i.e.,
9718 1.3.2-rc3). This makes it much easier to recognize "newer" versions
9719 and to see how much has been changed since the referenced tag.
9721 Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
9723 Signed-off-by: Wolfgang Denk <wd@denx.de>
9725 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
9726 Author: Wolfgang Denk <wd@denx.de>
9727 Date: Thu Mar 13 14:32:03 2008 +0100
9729 HMI1001: add support for MPC5200 Rev. B processors.
9731 Signed-off-by: Wolfgang Denk <wd@denx.de>
9733 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
9734 Author: Wolfgang Denk <wd@denx.de>
9735 Date: Thu Mar 13 14:29:49 2008 +0100
9737 TQM5200: remove dead code
9739 This board never used a MGT5100 processor.
9741 Signed-off-by: Wolfgang Denk <wd@denx.de>
9743 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
9744 Author: Marian Balakowicz <m8@semihalf.com>
9745 Date: Wed Mar 12 12:14:15 2008 +0100
9747 [new uImage] Fix build issue on ARM
9749 ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
9751 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9753 commit 3310c549a73a949430bfda90876df7552a1dab0c
9754 Author: Marian Balakowicz <m8@semihalf.com>
9755 Date: Wed Mar 12 12:13:13 2008 +0100
9757 [new uImage] Add new uImage format documentation and examples
9759 Create doc/uImage.FIT documentation directory with the following files:
9760 - command_syntax_extensions.txt : extended command syntax description
9761 - howto.txt : short usage howto
9762 - source_file_format.txt : internal new uImage format description
9764 Add example image source files:
9769 Update README appropriately.
9771 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9772 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9774 commit 1ec73761d2e247078f4520a265d463e8b73391a2
9775 Author: Marian Balakowicz <m8@semihalf.com>
9776 Date: Wed Mar 12 10:35:52 2008 +0100
9778 [new uImage] Fix definition of common bootm_headers_t fields
9780 verify, autostart and lmb fields are used regardless of CONFIG_FIT
9781 setting, move their definitions to common section.
9783 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9785 commit 1d1cb4270edc6a99276834064069717f9782c491
9786 Author: Marian Balakowicz <m8@semihalf.com>
9787 Date: Wed Mar 12 10:35:51 2008 +0100
9789 [new uImage] Fix build problems on trab board
9791 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9793 commit f773bea8e11f4a11c388dcee956b2444203e6b65
9794 Author: Marian Balakowicz <m8@semihalf.com>
9795 Date: Wed Mar 12 10:35:46 2008 +0100
9797 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
9799 Save FIT configuration provied in the first bootm argument and use it
9800 when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
9801 arguments are not specified.
9803 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9805 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
9806 Author: Marian Balakowicz <m8@semihalf.com>
9807 Date: Wed Mar 12 10:33:01 2008 +0100
9809 [new uImage] More verbose kernel image uncompress error message
9811 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9813 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
9814 Author: Marian Balakowicz <m8@semihalf.com>
9815 Date: Wed Mar 12 10:33:01 2008 +0100
9817 [new uImage] Use show_boot_progress() for new uImage format
9819 This patch allocates a set of show_boot_progress() IDs for new uImage format
9820 and adds show_boot_progress() calls in new uImage format handling code.
9822 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9824 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
9825 Author: Marian Balakowicz <m8@semihalf.com>
9826 Date: Wed Mar 12 10:33:01 2008 +0100
9828 [new uImage] Add new uImage fromat support to fpga command
9830 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9832 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
9833 Author: Marian Balakowicz <m8@semihalf.com>
9834 Date: Wed Mar 12 10:33:01 2008 +0100
9836 [new uImage] Add new uImage format handling to other bootm related commands
9842 diskboot - cmd_ide.c
9844 scsiboot - cmd_scsi.c
9847 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9849 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
9850 Author: Marian Balakowicz <m8@semihalf.com>
9851 Date: Wed Mar 12 10:33:00 2008 +0100
9853 [new uImage] Add new uImage format support to imgextract command
9855 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9857 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
9858 Author: Marian Balakowicz <m8@semihalf.com>
9859 Date: Wed Mar 12 10:33:00 2008 +0100
9861 [new uImage] Add new uImage format support to autoscript routine
9863 autoscript() routine is updated to accept second argument, which
9864 is only used for FIT images and provides a FIT subimage unit name.
9866 autoscript() routine callers must now pass two arguments. For
9867 non-interactive use (like in cmd_load.c, cmd_net.c), new environment
9868 variable 'autoscript_uname' is introduced and used as a FIT
9869 subimage unit name source.
9871 autoscript command accepts extended syntax of the addr argument:
9874 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9876 commit cd7c596e9f561dbbc17b717277438aee78cde14f
9877 Author: Marian Balakowicz <m8@semihalf.com>
9878 Date: Wed Mar 12 10:33:00 2008 +0100
9880 [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
9882 This patch updates architecture specific implementations of
9883 do_bootm_linux() adding new uImage format handling for
9884 operations like get kernel entry point address, get kernel
9885 image data start address.
9887 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9889 commit 3dfe110149311425919e6d6a14b561b4207498f1
9890 Author: Marian Balakowicz <m8@semihalf.com>
9891 Date: Wed Mar 12 10:32:59 2008 +0100
9893 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
9895 This patch adds new node offset fields to struct bootm_headers
9896 and updates bootm_headers processing code to make use of them.
9897 Saved node offsets allow to avoid repeating fit_image_get_node() calls.
9899 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9901 commit bc8ed486b125452ba3bd8344f052f437329150c5
9902 Author: Marian Balakowicz <m8@semihalf.com>
9903 Date: Wed Mar 12 10:32:53 2008 +0100
9905 [new uImage] ppc: Add new uImage format support to FDT handling routines
9907 Support for new (FIT) format uImages is added to powerpc specific
9908 boot_get_fdt() routine which now recognizes, sanity checks FIT image
9909 and is able to access data sections of the requested component image.
9911 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9913 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
9914 Author: Marian Balakowicz <m8@semihalf.com>
9915 Date: Wed Mar 12 10:14:57 2008 +0100
9917 [new uImage] Re-enable interrupts for non automatic booting
9919 Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
9920 environment variable is not set to 'yes'.
9922 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9924 commit d985c8498c4e47095820da97aa722381d39172c5
9925 Author: Marian Balakowicz <m8@semihalf.com>
9926 Date: Wed Mar 12 10:14:38 2008 +0100
9928 [new uImage] Remove unnecessary arguments passed to ramdisk routines
9930 boot_get_ramdisk() and image_get_ramdisk() do not need all
9931 cmdtp, flag, argc and argv arguments. Simplify routines definition.
9933 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9935 commit c87796483bc7c2900470dc747c367f602577608d
9936 Author: Marian Balakowicz <m8@semihalf.com>
9937 Date: Wed Mar 12 10:12:37 2008 +0100
9939 [new uImage] Add new uImage format support for ramdisk handling
9941 This patch updates boot_get_ramdisk() routine adding format
9942 verification and handling for new (FIT) uImages.
9944 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9946 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
9947 Author: Marian Balakowicz <m8@semihalf.com>
9948 Date: Wed Mar 12 10:01:05 2008 +0100
9950 [new uImage] Add new uImage format support for kernel booting
9952 New format uImages are recognized by the bootm command,
9953 validity of specified kernel component image is checked and
9954 its data section located and used for further processing
9955 (uncompress, load, etc.)
9957 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9959 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
9960 Author: Marian Balakowicz <m8@semihalf.com>
9961 Date: Tue Mar 11 12:35:20 2008 +0100
9963 [new uImage] Add new uImage format support for imls and iminfo commands
9965 imls and iminfo can now recognize nad print out contents of the new (FIT)
9968 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9970 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
9971 Author: Bartlomiej Sieka <tur@semihalf.com>
9972 Date: Tue Mar 11 12:34:47 2008 +0100
9974 [new uImage] Add support for new uImage format to mkimage tool
9976 Support for the new uImage format (FIT) is added to mkimage tool.
9977 Commandline syntax is appropriately extended:
9979 mkimage [-D dtc_options] -f fit-image.its fit-image
9981 mkimage (together with dtc) takes fit-image.its and referenced therein
9982 binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
9983 final image that can be transferred to the target (e.g., via tftp) and then
9984 booted using the bootm command in U-Boot.
9986 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
9988 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
9989 Author: Marian Balakowicz <m8@semihalf.com>
9990 Date: Mon Mar 10 17:53:49 2008 +0100
9992 [new uImage] Make node unit names const in struct bootm_headers
9994 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9996 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
9997 Author: Marian Balakowicz <m8@semihalf.com>
9998 Date: Fri Feb 29 21:24:06 2008 +0100
10000 [new uImage] New uImage low-level API
10002 Add FDT-based functions for handling new format component images,
10003 configurations, node operations, property get/set, etc.
10005 fit_ - routines handling global new format uImage operations
10006 like get/set top level property, process all nodes, etc.
10007 fit_image_ - routines handling component images subnodes
10008 fit_conf_ - routines handling configurations node
10010 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
10011 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10013 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
10014 Author: Wolfgang Denk <wd@denx.de>
10015 Date: Sun Mar 9 16:20:02 2008 +0100
10019 Update CHANGELOG for release.
10021 Signed-off-by: Wolfgang Denk <wd@denx.de>
10023 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
10024 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10025 Date: Sun Mar 9 14:52:11 2008 +0100
10027 SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
10029 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10030 Signed-off-by: Wolfgang Denk <wd@denx.de>
10032 commit db695b78515ddb88a2d4f3357c120345efbf59ec
10033 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10034 Date: Sun Mar 9 10:44:01 2008 +0100
10036 scb9328: Fix flash warning: type qualifiers ignored on function return type
10038 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10040 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
10041 Author: Wolfgang Denk <wd@denx.de>
10042 Date: Sun Mar 9 10:50:41 2008 +0100
10044 esd/common/fpga.c: fix indentation.
10046 Signed-off-by: Wolfgang Denk <wd@denx.de>
10048 commit cc3843e36453e2b8db65d7e56de938ba045016a0
10049 Author: Wolfgang Denk <wd@denx.de>
10050 Date: Sun Mar 9 10:33:31 2008 +0100
10052 common/kgdb.c: fix 'dereferencing type-punned pointer' warning
10054 and get rid of a couple of unneeded casts.
10056 Signed-off-by: Wolfgang Denk <wd@denx.de>
10058 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
10059 Author: Wolfgang Denk <wd@denx.de>
10060 Date: Sun Mar 9 10:09:53 2008 +0100
10062 esd/common/fpga.c: fix 'assignment of read-only location' error
10064 Signed-off-by: Wolfgang Denk <wd@denx.de>
10066 commit c6fe4dabac066e8758345d249032768496983a3e
10067 Author: Wolfgang Denk <wd@denx.de>
10068 Date: Sun Mar 9 02:13:19 2008 +0100
10070 Makefile: make build silently again.
10072 Signed-off-by: Wolfgang Denk <wd@denx.de>
10074 commit 76babc86576f092573599334c85ec543fdbc6015
10075 Author: Wolfgang Denk <wd@denx.de>
10076 Date: Sun Mar 9 02:07:49 2008 +0100
10078 m501sk: Fix out of tree building
10080 Signed-off-by: Wolfgang Denk <wd@denx.de>
10082 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
10083 Author: Wolfgang Denk <wd@denx.de>
10084 Date: Sun Mar 9 00:06:09 2008 +0100
10086 ADS5121: fix out of tree build
10088 and simplify Makefile a bit.
10090 Signed-off-by: Wolfgang Denk <wd@denx.de>
10092 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
10093 Author: Wolfgang Denk <wd@denx.de>
10094 Date: Sat Mar 8 22:35:31 2008 +0100
10098 Signed-off-by: Wolfgang Denk <wd@denx.de>
10100 commit 78a90f827df74520e939c794fc7413dace21c4db
10101 Author: Wolfgang Denk <wd@denx.de>
10102 Date: Sat Mar 8 22:35:04 2008 +0100
10106 Signed-off-by: Wolfgang Denk <wd@denx.de>
10108 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
10109 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10110 Date: Sat Mar 8 21:30:04 2008 +0100
10112 esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
10114 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10116 commit d75469d48c05795144f4b8ba76addbb4920a7bba
10117 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10118 Date: Sat Mar 8 09:25:49 2008 +0900
10120 net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
10122 When rtl_recv() of rtl8169 is called, OWNbit of status register
10123 is not enable occasionally.
10124 rtl_recv() doesn't work normally when the driver doesn't do
10125 appropriate processing.
10126 This patch fix this problem.
10128 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10130 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
10131 Author: Heiko Schocher <hs@denx.de>
10132 Date: Fri Mar 7 08:15:28 2008 +0100
10134 mgsuvd: update board configuration
10136 initialize the UPIOx controller.
10138 Signed-off-by: Heiko Schocher <hs@denx.de>
10140 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
10141 Author: Heiko Schocher <hs@denx.de>
10142 Date: Fri Mar 7 08:13:41 2008 +0100
10144 mgcoge: update board configuration
10146 add support for the config Flash.
10147 initialize the UPIOx controller.
10149 Signed-off-by: Heiko Schocher <hs@denx.de>
10151 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
10152 Author: Kim Phillips <kim.phillips@freescale.com>
10153 Date: Fri Mar 7 12:27:31 2008 -0600
10155 mpc83xx: make dtb basename file references equal those of linux
10157 the dts file basenames were updated in linux - this helps avoid
10158 inadvertently loading any old dtbs laying around.
10160 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10162 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
10163 Author: Kim Phillips <kim.phillips@freescale.com>
10164 Date: Wed Feb 27 16:08:22 2008 -0600
10166 net: uec_phy: actually increment the timeout counter
10168 allow u-boot to recover (and, e.g., switch to another interface) in the
10169 case where a PHY does not report autonegotiation is complete within its
10170 two second timeout value.
10172 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10174 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
10175 Author: Markus Brunner <super.firetwister@googlemail.com>
10176 Date: Wed Mar 5 21:38:12 2008 +0100
10178 fix taihu soft spi_read
10180 The taihu board used gpio_read_out_bit which reads the output register and not
10183 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
10185 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
10186 Author: Stefan Roese <sr@denx.de>
10187 Date: Fri Mar 7 08:01:43 2008 +0100
10189 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
10191 Signed-off-by: Stefan Roese <sr@denx.de>
10193 commit bd4458cb47abecabd406b1210457be96c69fc49d
10194 Author: Dave Liu <r63238@freescale.com>
10195 Date: Tue Mar 4 16:59:22 2008 +0800
10197 837xEMDS: Improve the system performance
10199 1. Make the CSB bus pipeline depth as 4, and enable
10201 2. Raise the eTSEC emergency priority;
10202 3. Use the highest IP blocks clock.
10204 Signed-off-by: Dave Liu <daveliu@freescale.com>
10206 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
10207 Author: Detlev Zundel <dzu@denx.de>
10208 Date: Thu Mar 6 16:45:53 2008 +0100
10210 Replace "run load; run update" with conditionalized "run load update".
10212 The latter version stops when "run load" fails for whatever reasons
10213 rendering the combination *a lot* more secure.
10215 Signed-off-by: Detlev Zundel <dzu@denx.de>
10217 commit 6bc113886d7d316df1a4e459bec8baf027518551
10218 Author: Stefan Roese <sr@denx.de>
10219 Date: Tue Mar 4 17:40:41 2008 +0100
10221 net: Print error message upon net usage when no ethernet-interface is found
10223 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
10224 defined. Then no ethernet interface is available but a simple "tftp"
10225 command will return without any error message which is quite confusing.
10227 Signed-off-by: Stefan Roese <sr@denx.de>
10229 commit a30a549a3553032d809e0356306b62de0b125901
10230 Author: Jon Loeliger <jdl@freescale.com>
10231 Date: Tue Mar 4 10:03:03 2008 -0600
10233 Remove erroneous or extra spd.h #includers.
10235 Many of the spd.h #includers don't need it,
10236 and wanted to have spd_sdram() declared instead.
10237 Since they didn't get that, some also had open
10238 coded extern declarations of it instead or as well.
10239 Fix it all up by using spd_sdram.h where needed.
10241 Signed-off-by: Jon Loeliger <jdl@freescale.com>
10243 commit a4475386cef14af3fd88f0518b688e755669486d
10244 Author: Wolfgang Denk <wd@denx.de>
10245 Date: Tue Mar 4 17:41:28 2008 +0100
10247 PCS440EP: fix build problems (redundant #define)
10249 Signed-off-by: Wolfgang Denk <wd@denx.de>
10251 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
10252 Author: Stefan Roese <sr@denx.de>
10253 Date: Tue Mar 4 17:39:25 2008 +0100
10255 net: Print error message upon net usage when no ethernet-interface is found
10257 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
10258 defined. Then no ethernet interface is available but a simple "tftp"
10259 command will return without any error message which is quite confusing.
10261 Signed-off-by: Stefan Roese <sr@denx.de>
10263 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
10264 Author: Wolfgang Denk <wd@denx.de>
10265 Date: Tue Mar 4 17:38:50 2008 +0100
10267 W7OLMC/W7OLMG: fix build problems (redundant #define)
10269 Signed-off-by: Wolfgang Denk <wd@denx.de>
10271 commit f9301e1cda296245ba052d7b08321199c3d0af9d
10272 Author: Wolfgang Denk <wd@denx.de>
10273 Date: Tue Mar 4 14:58:31 2008 +0100
10275 Makefile: fix problem with out-of-tree builds introduced by 5013c09f
10277 Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
10278 problem for out-of-tree builds which caused "make clean" to fail.
10280 Signed-off-by: Wolfgang Denk <wd@denx.de>
10282 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
10283 Author: Wolfgang Denk <wd@denx.de>
10284 Date: Tue Mar 4 11:58:26 2008 +0100
10286 examples/Makefile: build "hello_world" on 8xx, too.
10288 Signed-off-by: Wolfgang Denk <wd@denx.de>
10290 commit 74eb0222594fd23aafdf168e60e872814eea8b62
10291 Author: Mike Nuss <mike@terascala.com>
10292 Date: Mon Mar 3 15:27:05 2008 -0500
10294 PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
10296 Every now and then a Sequoia board (or equivalent hardware) had
10297 problems connecting to a Gigabit capable network interface.
10299 There were differences in the PHY setup between Linux and U-Boot.
10301 This patch fixes the problem. Apparently "remote fault" is being set,
10302 which signals to some devices (on the other end of the cable) that a
10303 fault has occurred, while other devices ignore it. I believe the RF bit
10304 was causing the issue, but I removed T4 also, to match up with Linux.
10306 Signed-off-by: Mike Nuss <mike@terascala.com>
10308 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
10309 Author: Timur Tabi <timur@freescale.com>
10310 Date: Mon Mar 3 09:58:52 2008 -0600
10312 fix QE firmware uploading limit
10314 Fix a typo in qe_upload_firmware() that prevented uploading firmware on
10315 systems with more than one RISC core.
10317 Signed-off-by: Timur Tabi <timur@freescale.com>
10319 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
10320 Author: Bernhard Nemec <bnemec@ganssloser.com>
10321 Date: Mon Mar 3 11:57:23 2008 +0000
10323 Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
10325 Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
10326 see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
10328 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
10330 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
10331 Author: Kim B. Heino <Kim.Heino@bluegiga.com>
10332 Date: Mon Mar 3 10:39:13 2008 +0200
10334 fix copy from ram to dataflash
10336 If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
10337 routines instead of dataflash. This is because it checks "if source
10338 address is not dataflash" instead of target address.
10340 Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
10342 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
10343 Author: Wolfgang Denk <wd@denx.de>
10344 Date: Mon Mar 3 12:16:44 2008 +0100
10346 Fix quoting problem (preboot setting) in many board config files.
10348 Signed-off-by: Wolfgang Denk <wd@denx.de>
10350 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
10351 Author: Wolfgang Denk <wd@denx.de>
10352 Date: Mon Mar 3 12:36:49 2008 +0100
10354 ADS5121: Fix default environment.
10356 Signed-off-by: Wolfgang Denk <wd@denx.de>
10358 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
10359 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10360 Date: Sun Mar 2 16:12:31 2008 +0100
10362 Makefile: Fix missing unconfig and mkconfig use
10364 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10366 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
10367 Author: michael <trimarchi@gandalf.sssup.it>
10368 Date: Sun Mar 2 23:33:46 2008 +0100
10370 Fix checking fat32 cluster size.
10372 This fixes the cluster size tests in the FAT32 file system.
10373 The current implementation of VFAT support doesn't work if the
10374 referred cluster has an offset > 16bit representation, causing
10375 "fatload" and "fatls" commands etc. to fail.
10377 Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
10379 commit 661bad63a076a96c39c64f136915f146725af92b
10380 Author: Wolfgang Denk <wd@denx.de>
10381 Date: Sun Mar 2 22:57:23 2008 +0100
10383 Prepare v1.3.2-rc2 release candidate
10385 Signed-off-by: Wolfgang Denk <wd@denx.de>
10387 commit 76957cb3d621bf664311908e5962e151c633c285
10388 Author: Stefan Roese <sr@denx.de>
10389 Date: Sat Mar 1 12:11:40 2008 +0100
10391 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
10393 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
10394 currently 4k/2k is configured. This patch fixes this issue.
10396 Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
10398 Signed-off-by: Stefan Roese <sr@denx.de>
10400 commit 118978c8eb43803e2794233922df4249fa278b83
10401 Author: Woodruff, Richard <r-woodruff2@ti.com>
10402 Date: Fri Feb 29 17:34:35 2008 -0600
10404 Fix alignment error on ARM for modules
10406 Fix alignment fault on ARM when running modules. With out an explicit
10407 linker file gcc4.2.1 will half word align __bss_start's value. The word
10408 dereference will crash hello_world.
10410 signed-off-by Richard Woodruff <r-woodruff2@ti.com>
10412 commit ce1120dd703e6f12c59e4eba9962356a0300b832
10413 Author: Dave Liu <r63238@freescale.com>
10414 Date: Fri Feb 29 17:45:31 2008 +0800
10416 fs: Fix ext2 read issue
10418 The ext2 aligned process will corrupt the key
10419 data struct, the patch fix this.
10421 Signed-off-by: Dave Liu <daveliu@freescale.com>
10423 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
10424 Author: Wolfgang Denk <wd@denx.de>
10425 Date: Sun Mar 2 22:45:33 2008 +0100
10427 Makefile: cleanup "clean" target
10429 Make sure CDPATH settings cannot interfere.
10432 Signed-off-by: Wolfgang Denk <wd@denx.de>
10434 commit ffda586fc1373243c9794babde69500f6293a8d8
10435 Author: Li Yang <leoli@freescale.com>
10436 Date: Fri Feb 29 11:46:05 2008 +0800
10438 add cscope build target
10440 Add cscope build target to generate cscope database for code browsing.
10442 Signed-off-by: Li Yang <leoli@freescale.com>
10444 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
10445 Author: Kim Phillips <kim.phillips@freescale.com>
10446 Date: Wed Feb 27 15:06:39 2008 -0600
10448 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
10450 erratum 5.6 states the autoneg completion bit is functional only if the
10451 autoneg bit is asserted.
10453 This fixes any secondarily-issued networking commands on non-gigabit
10454 links on the mpc8360 mds board.
10456 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10458 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
10459 Author: John Rigby <jrigby@freescale.com>
10460 Date: Tue Feb 26 09:38:14 2008 -0700
10462 MPC5121e ADS PCI support take 3
10464 Adds PCI support for MPC5121
10466 Tested with drivers/net/rtl8139.c
10468 Support is conditional since PCI on old silicon does not work.
10470 ads5121_PCI_config turns on PCI
10472 In this version, condition compilation of PCI code has been moved
10473 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
10474 suggested by Jean-Christophe PLAGNIOL-VILLARD
10476 Signed-off-by: John Rigby <jrigby@freescale.com>
10478 commit 44b4dbed4133f657705b7c5193209da9978243a7
10479 Author: Anatolij Gustschin <agust@denx.de>
10480 Date: Mon Feb 25 23:53:07 2008 +0100
10482 Fix warnings while compilation of post/drivers/memory.c
10484 Fix warnings while compilation with new gcc in eldk-4.2
10486 Signed-off-by: Anatolij Gustschin <agust@denx.de>
10488 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
10489 Author: Anatolij Gustschin <agust@denx.de>
10490 Date: Mon Feb 25 20:54:04 2008 +0100
10492 ppc4xx: Fix problem in 4xx_enet.c driver
10494 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
10495 enabled. To reproduce the problem ensure that 'ethrotate'
10496 environment variable isn't set to "no" and then run
10497 "tftp 200000 not_existent_file".
10498 This patch tries to fix the issue.
10500 Signed-off-by: Anatolij Gustschin <agust@denx.de>
10502 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
10503 Author: Anatolij Gustschin <agust@denx.de>
10504 Date: Mon Feb 25 20:04:20 2008 +0100
10506 POST: Disable cache while SPR POST
10508 Currently (since commit b2e2142c) u-boot crashes on
10509 sequoia board while SPR test if CONFIG_4xx_DCACHE is
10510 enabled. This patch disables the cache while SPR test.
10512 Signed-off-by: Anatolij Gustschin <agust@denx.de>
10514 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
10515 Author: Martin Krause <martin.krause@tqs.de>
10516 Date: Mon Feb 25 17:52:40 2008 +0100
10518 TQM5200: use automatic fdt memory fixup (part 2)
10520 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
10521 TB5200 and TB5200_B to fixup the /memory node with the memory values
10522 detected by U-Boot.
10524 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10526 commit 44ceec253ea941b301abf4b079d52324def69d92
10527 Author: Martin Krause <martin.krause@tqs.de>
10528 Date: Mon Feb 25 15:17:05 2008 +0100
10530 TQM5200: use automatic fdt memory fixup
10532 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
10533 TB5200 and TB5200_B to fixup the /memory node with the memory values
10534 detected by U-Boot.
10536 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10538 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
10539 Author: Martin Krause <martin.krause@tqs.de>
10540 Date: Mon Feb 25 13:27:52 2008 +0100
10542 TQM5200: fix bug in SDRAM initialization code
10544 This patch fixes a bug in the SDRAM initialization code for the
10545 TQM5200. The hi_addr bit is now set correctly. Without this patch
10546 the hi_addr bit is always set to 1, if the second SDRAM bank is
10549 For other MPC5200 boards a correspondig patch has already been applied
10550 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
10552 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10554 Forget the first patch please. I confused flash with SDRAM in
10557 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
10558 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10559 Date: Mon Feb 25 00:03:12 2008 +0100
10561 mx1fs2/flash: Fix multiple compiler warnings
10563 "pointer targets in assignment differ in signedness"
10565 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10567 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
10568 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10569 Date: Mon Feb 25 00:03:11 2008 +0100
10571 arm-imx: Fix register definitions
10573 Sync register definitions with linux
10575 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10577 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
10578 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10579 Date: Mon Feb 25 00:03:10 2008 +0100
10581 actua1/actua2/actua3: Fix multiple unused variable warnings
10584 actux1.c: In function 'checkboard':
10585 actux1.c:92: warning: unused variable 'revision'
10588 actux2.c: In function 'checkboard':
10589 actux2.c:100: warning: unused variable 's'
10590 actux2.c:99: warning: unused variable 'revision'
10591 actux2.c: In function 'reset_phy':
10592 actux2.c:130: warning: unused variable 'i'
10595 actux3.c: In function 'checkboard':
10596 actux3.c:114: warning: unused variable 'revision'
10598 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10600 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
10601 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10602 Date: Sun Feb 24 11:44:29 2008 +0900
10604 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
10606 The previous patch was lacking of i386, microblaze, nios and nios2. This
10607 patch tries to fix them.
10609 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10611 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
10612 Author: Marian Balakowicz <m8@semihalf.com>
10613 Date: Fri Feb 29 22:22:46 2008 +0100
10615 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
10617 Do not use global fdt blob pointer, calculate blob size from routine
10618 argument blob pointer.
10620 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10622 commit d1cc52879c8966507dad9fb575481e6d3985e64e
10623 Author: David Gibson <david@gibson.dropbear.id.au>
10624 Date: Tue Feb 12 00:58:31 2008 +1100
10626 libfdt: Add and use a node iteration helper function.
10628 This patch adds an fdt_next_node() function which can be used to
10629 iterate through nodes of the tree while keeping track of depth. This
10630 function is used to simplify the iteration code in a lot of other
10631 functions, and is also exported for use by library users.
10633 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
10635 commit 8cf30809a82902a471866d2f07725ce3b8a22291
10636 Author: Bartlomiej Sieka <tur@semihalf.com>
10637 Date: Fri Feb 29 16:00:24 2008 +0100
10639 [new uImage] Add libfdt support to mkimage
10641 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
10643 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
10644 Author: Bartlomiej Sieka <tur@semihalf.com>
10645 Date: Fri Feb 29 16:00:23 2008 +0100
10647 [new uImage] Add sha1.o object to mkimage binary build
10649 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
10651 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
10652 Author: Marian Balakowicz <m8@semihalf.com>
10653 Date: Fri Feb 29 16:00:06 2008 +0100
10655 [new uImage] Fix component handling for legacy multi component images
10657 Use uint32_t when accessing size table in image_multi_count() and
10658 image_multi_getimg() for multi component images.
10660 Add missing uimage_to_cpu() endianness conversion.
10662 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10664 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
10665 Author: Marian Balakowicz <m8@semihalf.com>
10666 Date: Fri Feb 29 15:59:59 2008 +0100
10668 [new uImage] Share common uImage code between mkimage and U-boot
10670 This patch adds the following common routines:
10672 1) Dedicated mkimage print_header() is replaced with common
10673 image_print_contents()
10674 image_print_contents_noindent()
10676 2) Common os/arch/type/comp fields name <--> id translation routines
10677 genimg_get_os_name()
10678 genimg_get_arch_name()
10679 genimg_get_type_name()
10680 genimg_get_comp_name()
10682 genimg_get_arch_id()
10683 genimg_get_type_id()
10684 genimg_get_comp_id()
10686 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10688 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
10689 Author: Marian Balakowicz <m8@semihalf.com>
10690 Date: Fri Feb 29 14:58:34 2008 +0100
10692 [new uImage] Update naming convention for bootm/uImage related code
10694 This patch introduces the following prefix convention for the
10695 image format handling and bootm related code:
10697 genimg_ - dual format shared code
10698 image_ - legacy uImage format specific code
10699 fit_ - new uImage format specific code
10700 boot_ - booting process related code
10702 Related routines are renamed and a few pieces of code are moved around and
10705 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10707 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
10708 Author: Kumar Gala <galak@kernel.crashing.org>
10709 Date: Wed Feb 27 21:51:51 2008 -0600
10711 [new uImage] Respect autostart setting in linux bootm
10713 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10714 Acked-by: Marian Balakowicz <m8@semihalf.com>
10716 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
10717 Author: Kumar Gala <galak@kernel.crashing.org>
10718 Date: Wed Feb 27 21:51:50 2008 -0600
10720 [new uImage] Provide ability to restrict region used for boot images
10722 Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
10723 to restrict what memory range is used for bootm.
10725 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10726 Acked-by: Marian Balakowicz <m8@semihalf.com>
10728 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
10729 Author: Kumar Gala <galak@kernel.crashing.org>
10730 Date: Wed Feb 27 21:51:49 2008 -0600
10732 [new uImage] Use lmb for bootm allocations
10734 Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
10735 functions over to using lmb for allocation of the ramdisk, command line
10736 and kernel bd info.
10738 Convert PPC specific fdt_relocate() to use lmb for allocation of the device
10741 Provided a weak function that board code can call to do additional
10742 lmb reserves if needed.
10744 Also introduce the concept of bootmap_base to specify the offset in
10745 physical memory that the bootmap is located at. This is used for
10746 allocations of the cmdline, kernel bd, and device tree as they should
10747 be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
10749 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10751 commit f5614e7926863bf0225ec860d9b319741a9c4004
10752 Author: Kumar Gala <galak@kernel.crashing.org>
10753 Date: Wed Feb 27 21:51:48 2008 -0600
10755 [new uImage] Add autostart flag to bootm_headers structure
10757 The autostart env variable was dropped as part of the initial new uImage
10758 cleanup. Add it back here so the arch specific code can decide if it
10759 wants to really boot or not.
10761 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10762 Acked-by: Marian Balakowicz <m8@semihalf.com>
10764 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
10765 Author: Kumar Gala <galak@kernel.crashing.org>
10766 Date: Wed Feb 27 21:51:47 2008 -0600
10768 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
10770 Introduce the LMB lib used on PPC in the kernel as a clean way to manage
10771 the memory spaces used by various boot images and structures. This code
10772 will allow us to simplify the code in bootm and its support functions.
10774 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10776 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
10777 Author: Kumar Gala <galak@kernel.crashing.org>
10778 Date: Tue Feb 19 22:03:47 2008 -0600
10780 [new uImage] ppc: Allow boards to specify effective amount of memory
10782 For historical reasons we limited the stack to 256M because some boards
10783 could only map that much via BATS. However newer boards are capable of
10784 mapping more memory (for example 85xx is capable of doing up to 2G).
10786 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10787 Acked-by: Marian Balakowicz <m8@semihalf.com>
10789 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
10790 Author: Kumar Gala <galak@kernel.crashing.org>
10791 Date: Wed Feb 27 21:51:46 2008 -0600
10793 [new uImage] rework error handling so common functions don't reset
10795 Changed image_get_ramdisk() to just return NULL on error and have
10796 get_ramdisk() propogate that error to the caller. It's left to the
10797 caller to call do_reset() if it wants to.
10799 Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
10800 to a common location. In the future we will change get_fdt() and
10801 fdt_relocate() to return success/failure and not call do_reset() at all.
10803 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10804 Acked-by: Marian Balakowicz <m8@semihalf.com>
10806 commit d2bc095a639672def11d5d043b5688d0dbd692ec
10807 Author: Kumar Gala <galak@kernel.crashing.org>
10808 Date: Wed Feb 27 21:51:45 2008 -0600
10810 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
10812 Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
10813 however it does mean we have to go in and fixup the initrd info since
10814 we don't know where it will be.
10816 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10818 commit 27953493ef025fb698d68c5dee39b36f01f4d530
10819 Author: Kumar Gala <galak@kernel.crashing.org>
10820 Date: Wed Feb 27 21:51:44 2008 -0600
10822 [new uImage] ppc: Determine if we are booting an OF style
10824 If we are bootin OF style than we can skip setting up some things
10825 that are used for the old boot method.
10827 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10828 Acked-by: Marian Balakowicz <m8@semihalf.com>
10830 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
10831 Author: Kumar Gala <galak@kernel.crashing.org>
10832 Date: Wed Feb 27 21:51:43 2008 -0600
10834 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
10836 We don't actually need the kdb param as we are just using it to get
10837 bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
10838 boot via OF we might not actually fill out a kdb.
10840 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10841 Acked-by: Marian Balakowicz <m8@semihalf.com>
10843 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
10844 Author: Kumar Gala <galak@kernel.crashing.org>
10845 Date: Wed Feb 27 16:30:47 2008 -0600
10847 85xx: Don't icbi when unlocking the cache
10849 There is no reason to icbi when invalidating the temporary stack in
10850 the d-cache. Its impossible on e500 to have the i-cache contain
10851 any addresses in the temp stack and it can be problematic in generating
10852 transactions on the bus to non-valid addresses.
10854 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10856 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
10857 Author: Andy Fleming <afleming@freescale.com>
10858 Date: Wed Feb 27 15:50:50 2008 -0600
10860 Fix source for ECM error IVPR
10862 The source vector for the ECM was being set to 2,
10863 but that's what the source vector for DDR was being
10864 set to. Change it to 1.
10866 Signed-off-by: Andy Fleming <afleming@freescale.com>
10868 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
10869 Author: Andy Fleming <afleming@freescale.com>
10870 Date: Wed Feb 27 14:29:58 2008 -0600
10872 Invalidate INIT_RAM TLB mappings
10874 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
10875 mappings to be unguarded. This collided with an existing "bug"
10876 where the mappings for the INIT_RAM were being kept around.
10877 This meant that speculative loads to those addresses were
10878 succeeding in the TLB, and going out to the bus, where they
10879 were causing an exception (there's nothing at that address). The
10880 Flash code was coincidentally causing such a speculative load.
10881 Rather than go back to mapping the INIT RAM as guarded, we fix
10882 it so that the entries for the INIT_RAM are invalidated. Thus
10883 the speculative loads will fail in the TLB, and have no effect.
10885 Signed-off-by: Andy Fleming <afleming@freescale.com>
10887 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
10888 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10889 Date: Sun Feb 17 22:56:17 2008 +0100
10891 sbc8548: Fix Revision reading and unused variable 'path'
10893 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10895 commit 495d162374c472f46454453553382ad0735dc725
10896 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10897 Date: Sun Feb 17 22:56:16 2008 +0100
10899 sbc8548: Fix cfi flash bank declaration
10901 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10903 commit 4efbe9dbb129f857f27856936112c8c02f016be6
10904 Author: Marian Balakowicz <m8@semihalf.com>
10905 Date: Wed Feb 27 11:02:26 2008 +0100
10907 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
10909 Dual format image code must properly handle all three FDT passing methods:
10910 - raw FDT blob passed
10911 - FDT blob embedded in the legacy uImage
10912 - FDT blob embedded in the new uImage
10914 This patch enables proper raw FDT handling when no FIT imaeg support
10915 is compiled in. This is a bit tricky as we must dected FIT format even
10916 when FIT uImage handling is not enabled as both FIT uImages and raw FDT
10917 blobs use tha same low level format (libfdt).
10919 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10921 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
10922 Author: Marian Balakowicz <m8@semihalf.com>
10923 Date: Wed Feb 27 11:02:26 2008 +0100
10925 [new uImage] POWERPC: Add image_get_fdt() routine
10927 FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
10928 (3) or embedded in the new uImage. For the (2) case embedding image must be
10929 verified before we get FDT from it. This patch factors out legacy image
10930 specific verification routine to the separate helper routine.
10932 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10933 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10935 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
10936 Author: Marian Balakowicz <m8@semihalf.com>
10937 Date: Wed Feb 27 11:02:07 2008 +0100
10939 [new uImage] Add image_get_kernel() routine
10941 Legacy image specific verification is factored out to a separate helper
10942 routine to keep get_kernel() generic and simple.
10944 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10945 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10947 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
10948 Author: Marian Balakowicz <m8@semihalf.com>
10949 Date: Wed Feb 27 11:01:04 2008 +0100
10951 [new uImage] Move image verify flag to bootm_headers structure
10953 Do not pass image verification flag directly to related routines.
10954 Simplify argument passing and move it to the bootm_header structure which
10955 contains curently processed image specific data and is already being passed
10956 on the argument list.
10958 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10959 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10961 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
10962 Author: Marian Balakowicz <m8@semihalf.com>
10963 Date: Wed Feb 27 11:00:47 2008 +0100
10965 [Makefile] Sort COBJS in lib_<arch> Makefiles
10967 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10969 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
10970 Author: Marian Balakowicz <m8@semihalf.com>
10971 Date: Wed Feb 27 11:00:47 2008 +0100
10973 [new uImage] Optimize gen_get_image() flow control
10975 When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
10976 to do, update its control flow to better reflect that simple case.
10978 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10979 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10981 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
10982 Author: Marian Balakowicz <m8@semihalf.com>
10983 Date: Mon Feb 4 08:28:17 2008 +0100
10985 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
10987 PPC specific FDT blob handling code is divided into two separate routines:
10989 get_fdt() - find and verify a FDT blob (either raw or image embedded)
10990 fdt_relocate() - move FDT blob to within BOOTMAP if needed
10992 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
10993 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10995 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
10996 Author: Jon Loeliger <jdl@freescale.com>
10997 Date: Mon Feb 25 13:13:37 2008 -0600
10999 86xx: Fix renamed GUR symbols in sbc8641d board.
11001 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
11002 (86xx: Fix GUR PCI config registers properly), we should have
11003 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
11004 symbols in the sbc8641d board as well. Fix this oversight.
11006 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11008 commit 64cd594e623c39f73964d18787763e4533f791f7
11009 Author: Stefan Roese <sr@denx.de>
11010 Date: Mon Feb 25 16:50:48 2008 +0100
11012 ppc4xx: Fix acadia_nand build problem
11014 Don't include testdram() on NAND-booting target acadia_nand. This saves
11015 a few bytes and makes the target build clean again.
11017 Signed-off-by: Stefan Roese <sr@denx.de>
11019 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
11020 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11021 Date: Sun Feb 24 23:03:12 2008 +0000
11023 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
11025 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11027 commit 724902c8464e610642b3a170278b99710325888e
11028 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11029 Date: Sun Feb 24 23:03:11 2008 +0000
11031 arm-imx: Fix registers definition
11033 Sync registers definition with linux
11035 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11037 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
11038 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11039 Date: Sun Feb 24 23:03:10 2008 +0000
11041 actua1/actua2/actua3: Fix multipleunused variable
11044 actux1.c: In function 'checkboard':
11045 actux1.c:92: warning: unused variable 'revision'
11048 actux2.c: In function 'checkboard':
11049 actux2.c:100: warning: unused variable 's'
11050 actux2.c:99: warning: unused variable 'revision'
11051 actux2.c: In function 'reset_phy':
11052 actux2.c:130: warning: unused variable 'i'
11055 actux3.c: In function 'checkboard':
11056 actux3.c:114: warning: unused variable 'revision'
11058 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11060 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
11061 Author: Marian Balakowicz <m8@semihalf.com>
11062 Date: Mon Feb 4 08:28:09 2008 +0100
11064 [new uImage] Add dual format uImage support framework
11066 This patch adds framework for dual format images. Format detection is added
11067 and the bootm controll flow is updated to include cases for new FIT format
11070 When the legacy (image_header based) format is detected appropriate
11071 legacy specific handling is invoked. For the new (FIT based) format uImages
11072 dual boot framework has a minial support, that will only print out a
11073 corresponding debug messages. Implementation of the FIT specific handling will
11074 be added in following patches.
11076 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11078 commit b29661fc1151077776454288051bc9a488351ce8
11079 Author: Wolfgang Denk <wd@denx.de>
11080 Date: Sun Feb 24 15:21:36 2008 +0100
11082 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
11084 Signed-off-by: Wolfgang Denk <wd@denx.de>
11086 commit 00b48a48424894daa589d166d73277830b1c6ac4
11087 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11088 Date: Sat Feb 23 12:15:56 2008 +0100
11090 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
11092 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11094 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
11095 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11096 Date: Sat Feb 23 17:24:16 2008 +0900
11098 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
11100 ----------------------------------------------------------------
11101 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
11103 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
11106 GCC can be made to warn about usage of long long types with ISO C90
11107 (-ansi), but only with -pedantic. You can write this in a way that even
11108 then it doesn't cause warnings, namely by:
11111 __extension__ typedef __signed__ long long __s64;
11112 __extension__ typedef unsigned long long __u64;
11115 The __extension__ keyword in front of this switches off any pedantic
11116 warnings for this expression.
11118 Signed-off-by: Olaf Hering <olh@suse.de>
11119 Cc: <linux-arch@vger.kernel.org>
11120 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
11121 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11122 ----------------------------------------------------------------
11124 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11126 commit 208acd112e6517b21fc30c420396902b103563ac
11127 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11128 Date: Sat Feb 23 17:07:57 2008 +0900
11130 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
11132 This will reduce the build time.
11134 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11136 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
11137 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11138 Date: Sat Feb 23 17:05:00 2008 +0900
11140 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
11142 This will reduce the build time.
11144 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11146 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
11147 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11148 Date: Sat Feb 23 16:58:41 2008 +0900
11150 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
11152 This reduces the build time by ~10%. Here's the gth2_config example.
11155 real 0m31.441s 0m27.833s
11156 user 0m24.766s 0m23.045s
11157 sys 0m10.425s 0m7.468s
11159 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11161 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
11162 Author: Marcel Moolenaar <marcelm@juniper.net>
11163 Date: Fri Feb 22 10:48:07 2008 -0800
11165 make define2mk.sed work on FreeBSD
11167 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
11168 the define2mk.sed script was identified as the source of the link
11169 failure on FreeBSD. The problem is that sed(1) does not always support
11170 the '+' operator. It isn't on FreeBSD. The attach patch implements the
11171 equivalent, using the '*' operator instead and should work everywhere.
11173 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
11175 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
11176 Author: Detlev Zundel <dzu@denx.de>
11177 Date: Fri Feb 22 17:21:32 2008 +0100
11179 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
11181 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
11182 final traces of long-deprecated "ramdisk" kernel parm") makes these
11183 changes neccessary.
11185 Signed-off-by: Detlev Zundel <dzu@denx.de>
11187 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
11188 Author: Larry Johnson <lrj@acm.org>
11189 Date: Thu Feb 21 13:58:16 2008 -0500
11191 LM75 bug fix for negative temperatures
11193 When the LM75 temperature sensor measures a temperature below 0 C, the
11194 current driver does not perform sign extension, so the result returned is
11195 256 C too high. This patch fixes the problem.
11197 Signed-off-by: Larry Johnson <lrj@acm.org>
11199 commit 5a910c224b13e413bda41922379add6d75c32da3
11200 Author: Heiko Schocher <hs@denx.de>
11201 Date: Thu Feb 21 18:33:45 2008 +0100
11203 IDS8247: update MAINTAINER entry.
11205 Signed-off-by: Heiko Schocher <hs@denx.de>
11207 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
11208 Author: Heiko Schocher <hs@denx.de>
11209 Date: Thu Feb 21 18:31:15 2008 +0100
11211 Fix device tree for mgsuvd board.
11213 Rename the "scc" node in "ethernet" for the mgsuvd board.
11215 Signed-off-by: Heiko Schocher <hs@denx.de>
11217 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
11218 Author: Yuri Tikhonov <yur@emcraft.com>
11219 Date: Thu Feb 21 14:23:42 2008 +0100
11221 lwmon5: enable hardware watchdog
11223 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
11224 causing it to reboot the board if U-Boot does a long busy-wait with
11225 udelay(). Thus, for these boards we have to restart WD more
11228 This patch splits the busy-wait udelay() into smaller, predefined,
11229 intervals, so that the watchdog timer may be resetted with the
11230 configurable (CONFIG_WD_PERIOD) interval.
11232 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
11234 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
11235 Author: Anatolij Gustschin <agust@denx.de>
11236 Date: Thu Feb 21 12:52:29 2008 +0100
11238 ppc4xx: Support for ATI Radeon 9200 card on sequoia
11240 Adds configuration option for ATI Radeon 9200 card
11241 support to sequoia config file. If CONFIG_VIDEO
11242 is enabled, TEXT_BASE should be changed to 0xFFF80000.
11244 Signed-off-by: Anatolij Gustschin <agust@denx.de>
11246 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
11247 Author: Kumar Gala <galak@kernel.crashing.org>
11248 Date: Mon Feb 18 08:18:07 2008 -0600
11250 Remove duplicate defines for ARRAY_SIZE
11252 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
11253 the define in common.h.
11255 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11257 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
11258 Author: Kumar Gala <galak@kernel.crashing.org>
11259 Date: Mon Feb 18 08:09:37 2008 -0600
11261 ppc: Allow boards to specify effective amount of memory
11263 For historical reasons we limited the stack to 256M because some boards
11264 could only map that much via BATS. However newer boards are capable of
11265 mapping more memory (for example 85xx is capable of doing up to 2G).
11267 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11269 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
11270 Author: Mike Frysinger <vapier@gentoo.org>
11271 Date: Mon Feb 18 05:24:13 2008 -0500
11273 include autoconf.mk before any other .mk files
11275 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
11276 those .mk files can have make if statements based on the current config.
11278 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11280 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
11281 Author: Mike Frysinger <vapier@gentoo.org>
11282 Date: Mon Feb 18 05:10:07 2008 -0500
11284 error check autoconf.mk generation
11286 If any of the steps for generating autoconf.mk fail currently, they go
11287 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
11288 This is simpler and more robust than placing '|| exit $$?' after every line.
11290 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11292 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
11293 Author: Stefano Babic <sbabic@denx.de>
11294 Date: Mon Feb 18 08:03:51 2008 +0100
11296 Fix bug in dependency checking
11298 By adding VERSION_FILE to the PHONY targets the script
11299 /tools/setlocalversion is always called and version_autogenerated.h
11300 is replaced only if the script find a modified source file.
11302 Signed-off-by: Stefano Babic <sbabic@denx.de>
11304 commit 98ba144ccc912eee90dd42699f023c497ce774c6
11305 Author: Kyungmin Park <kmpark@infradead.org>
11306 Date: Mon Feb 18 14:35:43 2008 +0900
11308 Fix GPMC CS2 memory setup at apollon
11310 It disables the current map first
11312 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
11314 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
11315 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11316 Date: Sun Feb 17 23:52:46 2008 +0100
11318 uli526x: Fix multiple differ in signedness and parentheses around comparison
11320 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11322 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
11323 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11324 Date: Sun Feb 17 16:58:04 2008 +0100
11326 MIPS: Fix CFG_NO_FLASH support
11328 - Fix flash_init call when CFG_NO_FLASH is used
11329 - Remove no more needed flash.c for qemu-mips
11331 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11333 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
11334 Author: Mike Frysinger <vapier@gentoo.org>
11335 Date: Sat Feb 16 02:40:18 2008 -0500
11337 easylogo: clean up some more and add -r (rgb) support
11339 Michael Hennerich added support for outputting an image in RGB format rather
11340 than forcing YUYV all the time. This makes obvious sense if the display you
11341 have takes RGB input rather than YUYV.
11343 Rather than hack in support for options, I've converted it to use getopt and
11344 cleaned up the argument parsing in the process.
11346 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
11347 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11349 commit f65c98129ccada3f7caf97d80395a95b84e911de
11350 Author: Mike Frysinger <vapier@gentoo.org>
11351 Date: Sat Feb 16 02:12:37 2008 -0500
11353 Makefile: add target for $(LDSCRIPT)
11355 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
11356 then change into the board directory and try and create it. This allows you
11357 to generate the linker script on the fly based upon board defines (like the
11358 Blackfin boards do).
11360 There should be no regressions due to this change as the normal case is to
11361 already have a u-boot.lds file. If that's the case, then there's nothing to
11362 generate, and so make will always exit. The fix here is that if the linker
11363 script does not exist, the implicit rules take over and attempt to guess how
11364 to generate the file.
11366 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11368 commit 5583cbf736474ef754e128a54fb78632f57b48fd
11369 Author: Marian Balakowicz <m8@semihalf.com>
11370 Date: Thu Feb 21 17:27:49 2008 +0100
11372 [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
11374 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11376 commit 2242f5369822bc7780db95c47985bb408ea9157b
11377 Author: Marian Balakowicz <m8@semihalf.com>
11378 Date: Thu Feb 21 17:27:41 2008 +0100
11380 [new uImage] Rename and move print_image_hdr() routine
11382 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11384 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
11385 Author: Marian Balakowicz <m8@semihalf.com>
11386 Date: Thu Feb 21 17:20:20 2008 +0100
11388 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
11390 Introducing routines for parsing new uImage format bootm arguments:
11391 [<addr>]#<conf> - configuration specification
11392 [<addr>]:<subimg> - subimage specification
11394 New format images can contain multiple subimages of the same type. For example
11395 a single new format image file can contain three kernels, two ramdisks and a
11396 couple of FDT blobs. Subimage and configuration specifications are extensions
11397 to bootm (and other image-related commands) arguments' syntax that allow to
11398 specify which particular subimage should be operated on.
11400 Subimage specification is used to denote a particular subimage. Configurations
11401 are a bit more complex -- they are used to define a particualr booting setup,
11402 for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
11405 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11407 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
11408 Author: Marian Balakowicz <m8@semihalf.com>
11409 Date: Thu Feb 21 17:20:19 2008 +0100
11411 [new uImage] Add gen_get_image() routine
11413 This routine assures that image (whether legacy or FIT) is not
11414 in a special dataflash storage.
11416 If image address is a dataflash address image is moved to system RAM.
11418 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11420 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
11421 Author: Marian Balakowicz <m8@semihalf.com>
11422 Date: Thu Feb 21 17:20:18 2008 +0100
11424 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
11426 New uImage format (Flattened Image Tree) requires libfdt
11427 functionality, print out error message if CONFIG_OF_LIBFDT
11430 New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
11431 This commit turns it on by default.
11433 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11435 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
11436 Author: Michael Schwingen <michael@schwingen.org>
11437 Date: Mon Feb 18 23:16:35 2008 +0100
11439 CFI: Do not use uninitialized cmd_reset
11441 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
11444 From a short test, it looks like AMD-style flash roms treat *any* unknown
11445 command write as a reset, at least when in CFI Query mode, so issuing the
11446 Intel reset command to AMD-style flashs seems safe (from the small sample I
11447 have), plus the 3-cycle magic sequence should kick the state machine into
11448 the right state even without a reset command. Since the AMD-style flashs
11449 require the unlock sequence for real operation, I chose to try the AMD reset
11450 command first, so that Intel flashs do no see an invalid command prior to
11453 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
11454 plus Intel StrataFlash.
11456 Signed-off-by: Michael Schwingen <michael@schwingen.org>
11457 Signed-off-by: Stefan Roese <sr@denx.de>
11459 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
11460 Author: Rafal Jaworowski <raj@semihalf.com>
11461 Date: Thu Feb 21 11:56:44 2008 +0100
11463 API: Add (c) and licensing notice to the public API header.
11465 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
11467 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
11468 Author: Yuri Tikhonov <yur@emcraft.com>
11469 Date: Thu Feb 21 11:06:07 2008 +0100
11471 Fix CPU POST test failure
11473 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
11474 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
11475 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
11476 This patch just saves the CR value before running the test code, so allowing
11477 it to do anything it wants with CR.
11479 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
11480 Acked-by: Yuri Tikhonov <yur@emcraft.com>
11483 commit d5908b093955415f3d340706378b991f911af671
11484 Author: Jon Loeliger <jdl@freescale.com>
11485 Date: Wed Feb 20 15:26:51 2008 -0600
11487 8610HPCD: Document the flashbank selection switches.
11489 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11491 commit a551cee99ad1d1da20fd23ad265de47448852f56
11492 Author: Jon Loeliger <jdl@freescale.com>
11493 Date: Wed Feb 20 14:22:26 2008 -0600
11495 86xx: Fix GUR PCI config registers properly.
11497 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
11498 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
11499 botched it due to not realizing that 8610 and 8641 had different
11500 Global Utility Register defintions, one of which was like 85xx,
11501 and the other wasn't. Correct this problem by introducing two
11502 symbols, one for each 86xx SoC, but neither of which is named
11503 anything like 85xx.
11505 My bad. Lovely Wednesday with git bisect. You know.
11507 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11509 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
11510 Author: Jon Loeliger <jdl@freescale.com>
11511 Date: Wed Feb 20 12:24:11 2008 -0600
11513 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
11515 Without an actual supported video card hooked up, enabling
11516 the CONFIG_VIDEO by default just makes it look broken by
11517 routing all console output to the video card. Don't.
11519 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11521 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
11522 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11523 Date: Wed Jan 30 15:08:15 2008 -0600
11525 ColdFire: Fix missing code flash size for M5485EVB
11527 Signed-off-by: James Mahan <kmahan@freescale.com>
11528 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11530 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
11531 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
11532 Date: Wed Jan 30 15:04:42 2008 -0600
11534 ColdFire: Fix 5282 and 5271 interrupt mask bit
11536 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11538 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
11539 Author: Jon Loeliger <jdl@freescale.com>
11540 Date: Tue Feb 19 12:31:08 2008 -0600
11542 8610HPCD: Fix typos in two PCI setup registers.
11544 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
11545 were erroneously present as 85xx names and values, leftover from
11546 the clone wars. Fix this by removing the 85xx cruft from the
11549 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11551 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
11552 Author: Jon Loeliger <jdl@freescale.com>
11553 Date: Mon Feb 18 14:01:56 2008 -0600
11555 86xx: Convert sbc8641d to use libfdt.
11557 This is the proper fix for a missing closing brace in the function
11558 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
11559 The ft_cpu_setup() function in mpc8641hpcn.c should have been
11560 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
11561 but was missed. Only, the sbc8641d was nominally still using it.
11562 It all got ripped out, and the funcality that was in ft_board_setup()
11563 was refactored to remove the CPU portions into the new file
11564 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
11566 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
11568 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11570 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
11571 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11572 Date: Sun Feb 17 23:35:31 2008 +0100
11574 mpc86xx: Fix unused variable 'config' and 'immap'
11576 and remove useless CONFIG_DDR_INTERLEAVE
11578 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11580 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
11581 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11582 Date: Sun Feb 17 23:03:36 2008 +0100
11584 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
11586 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11588 commit b6f29c84c208a091f95a10cbc9852d729659ba20
11589 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11590 Date: Sun Feb 17 14:15:31 2008 +0100
11592 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
11594 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11596 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
11597 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11598 Date: Sun Feb 17 14:15:32 2008 +0100
11600 pxa: fix assignment from incompatible pointer type
11602 fix mmc_bread function prototype
11604 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11606 commit 64d792063fff90b8118179b092feee09fe5cae13
11607 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11608 Date: Sun Feb 17 14:15:30 2008 +0100
11610 at91cap9adk: fix implicit declaration of function 'eth_init'
11612 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11614 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
11615 Author: Wolfgang Denk <wd@denx.de>
11616 Date: Sun Feb 17 15:43:44 2008 +0100
11618 Remove files added by mistake, update CHANGELOG.
11620 Signed-off-by: Wolfgang Denk <wd@denx.de>
11622 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
11623 Author: Mike Nuss <mike@terascala.com>
11624 Date: Wed Feb 6 11:10:11 2008 -0500
11626 PPC440EPx: Optionally enable second I2C bus
11628 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
11629 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
11630 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
11632 Signed-off-by: Mike Nuss <mike@terascala.com>
11633 Cc: Stefan Roese <sr@denx.de>
11635 commit ef5b4f221c22d05770878513951745f236b5b43f
11636 Author: Niklaus Giger <niklaus.giger@netstal.com>
11637 Date: Tue Feb 5 10:26:44 2008 +0100
11639 ppc4xx: HCU4/5. Cleanup configs
11641 - hcu4.h: Removed define of CONFIG_PPC405GPr
11642 - Corrected phy addresses
11643 - Fix boot variables
11644 - Respect line length of 80 chars
11646 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11648 commit 74973126d1be63ac75bdc192f46234dca3a7c421
11649 Author: Niklaus Giger <niklaus.giger@netstal.com>
11650 Date: Tue Feb 5 11:31:28 2008 +0100
11652 ppc4xx: HCU4/5. Cleanups
11654 - Fix some coding style violations.
11655 - Use in/out_u16/32 where appropriate.
11656 - Use register names from ppc405.h.
11657 - Fix trace useage for Lauterbach.
11658 - Remove obsolete generation HCU2.
11659 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
11661 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11663 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
11664 Author: Niklaus Giger <niklaus.giger@netstal.com>
11665 Date: Tue Feb 5 10:26:41 2008 +0100
11667 ppc4xx: PPC405GPr fix missing register definitions
11669 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
11671 commit 214398d9cb22268d9d4f7563359edca0f78297a2
11672 Author: Larry Johnson <lrj@acm.org>
11673 Date: Fri Jan 18 21:49:05 2008 -0500
11675 ppc4xx: Beautify configuration files for Sequoia and Korat boards
11677 Signed-off-by: Larry Johnson <lrj@acm.org>
11679 commit 30c6a241e88499f536e86d325759e29ba00ff67f
11680 Author: Anatolij Gustschin <agust@denx.de>
11681 Date: Fri Feb 15 20:09:01 2008 +0100
11683 Wipe out assembler warnings while compiling x86 biosemu
11685 This patch tries to get rid of some assembler warnings about
11686 changed .got2 section type while compiling x86 bios emulator
11689 Signed-off-by: Anatolij Gustschin <agust@denx.de>
11691 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
11692 Author: Wolfgang Denk <wd@denx.de>
11693 Date: Fri Feb 15 00:57:09 2008 +0100
11695 Prepare v1.3.2-rc1 release candidate
11697 commit f33e9653c9c09868995d788511d573771c209fe5
11698 Author: Anatolij Gustschin <agust@denx.de>
11699 Date: Fri Feb 15 00:13:20 2008 +0100
11701 Fix compile warning on lib_ppc/board.c
11703 Signed-off-by: Anatolij Gustschin <agust@denx.de>
11705 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
11706 Author: Anatolij Gustschin <agust@denx.de>
11707 Date: Thu Feb 14 18:22:04 2008 +0100
11709 Add Radeon Mobility 9200 pci device id to the radeon driver
11711 This patch extends PCI device id table of the
11712 radeon driver so that the driver will also support
11713 Radeon Mobility 9200 (M9+) based boards.
11715 Signed-off-by: Anatolij Gustschin <agust@denx.de>
11717 commit 1b8607e1f7143548c6062c28371449ec69588c00
11718 Author: Anatolij Gustschin <agust@denx.de>
11719 Date: Thu Feb 14 18:19:50 2008 +0100
11721 Extend ATI Radeon driver to support more video modes
11723 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
11724 800x600, 640x480 at 24, 16 and 8 bpp.
11726 Signed-off-by: Anatolij Gustschin <agust@denx.de>
11728 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
11729 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11730 Date: Sun Feb 10 17:05:20 2008 +0100
11732 xsengine: fix typo and few coding style
11734 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11736 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
11737 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
11738 Date: Fri Feb 8 21:25:58 2008 +0100
11740 Fix wrong memory limit calculation in memory-test
11742 If the length of the memory address range passed to the "mtest" command is
11743 not of the form 2^x - 1, not all address lines are tested. This bug is
11744 inherited from the original software at
11745 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
11748 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
11750 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
11751 Author: Wolfgang Denk <wd@denx.de>
11752 Date: Fri Feb 15 00:11:39 2008 +0100
11754 Coding STyle cleanup.
11756 Signed-off-by: Wolfgang Denk <wd@denx.de>
11758 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
11759 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11760 Date: Tue Feb 5 13:30:43 2008 +0900
11762 sh: Fix register address of SH7722
11764 The address of SH7722 is wrong by old document.
11765 This patch fixes this problem.
11767 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11769 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
11770 Author: Mike Frysinger <vapier@gentoo.org>
11771 Date: Mon Feb 4 17:44:23 2008 -0500
11773 only update version header as needed
11775 Constantly rebuilding the version header will force useless relinking, so we
11776 simply need to compare the new header with the existing one before updating
11779 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11781 commit 208447f8e953f347425eb92c8e28d59e6d911363
11782 Author: Mike Frysinger <vapier@gentoo.org>
11783 Date: Mon Jan 28 05:56:19 2008 -0500
11785 Do not specify a CROSS_COMPILE default when executing size
11787 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11789 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
11790 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
11791 Date: Wed Feb 13 11:19:19 2008 +0100
11793 Fix return value of mtest when CFG_ALT_MEMTEST set
11795 Fix a missing return statement from a non-void function.
11797 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
11799 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
11800 Author: Timur Tabi <timur@freescale.com>
11801 Date: Wed Jan 9 14:35:26 2008 -0600
11803 85xx, 86xx: Determine I2C clock frequencies and store in global_data
11805 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
11807 Update the get_clocks() function in 85xx and 86xx to determine the I2C
11808 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
11810 Signed-off-by: Timur Tabi <timur@freescale.com>
11812 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
11813 Author: Wolfgang Denk <wd@denx.de>
11814 Date: Thu Feb 14 23:18:01 2008 +0100
11816 TQM834x: clean up configuration
11818 Get board name consistent with Linux and elsewhere;
11819 get rid of local network definitions etc.
11821 Signed-off-by: Wolfgang Denk <wd@denx.de>
11823 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
11824 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11825 Date: Thu Feb 14 08:02:12 2008 +0100
11827 TFTP: fix search of ':' in BootFile
11829 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11831 commit 0bc9efada170096c6b273f19165e32936d330d80
11832 Author: Wolfgang Denk <wd@denx.de>
11833 Date: Thu Feb 14 22:46:55 2008 +0100
11835 Coding style cleanup; update CHANGELOG.
11837 Signed-off-by: Wolfgang Denk <wd@denx.de>
11839 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
11840 Author: Wolfgang Denk <wd@denx.de>
11841 Date: Thu Feb 14 22:43:22 2008 +0100
11843 PPC: Use r2 instead of r29 as global data pointer
11845 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
11846 will refuse to use load/store multiple insns; instead, it issues a
11847 list of simple load/store instructions upon function entry and exit,
11848 resulting in bigger code size, which in turn makes the build for a
11853 Signed-off-by: Wolfgang Denk <wd@denx.de>
11855 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
11856 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
11857 Date: Wed Jan 30 09:08:49 2008 +0100
11859 ARM: make the machid configurable via the environment
11861 If the variable "machid" exists, let do_bootm_linux use that instead
11862 of bd->bi_arch_number.
11864 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
11866 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
11867 Author: Vlad Lungu <vlad@comsys.ro>
11868 Date: Wed Jan 23 16:34:46 2008 +0200
11870 Use #ifdef CONFIG_FSLDMAFEC
11872 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
11875 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
11877 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
11878 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11879 Date: Sat Jan 19 10:25:59 2008 +0900
11881 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
11883 Current MII_DEBUG is confusing in two ways. One is useless define-then-
11884 undef at the top of the file. The other is there is only one debug() in
11885 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
11886 While there are many useful printf()/puts() debug codes, but they are for
11887 DEBUG, not for MII_DEBUG.
11889 This patch tries to put them all together into MII_DEBUG and debug().
11891 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11893 commit 751b9b5189f3274b03c809172631316d6b002c82
11894 Author: Kyungmin Park <kmpark@infradead.org>
11895 Date: Thu Jan 17 16:43:25 2008 +0900
11897 OneNAND Initial Program Loader (IPL) support
11899 This patch enables the OneNAND boot within U-Boot.
11900 Before this work, we used another OneNAND IPL called X-Loader based
11901 on open source. With this work, we can build the oneboot.bin image
11902 without other program.
11904 The build sequence is simple.
11905 First, it compiles the u-boot.bin
11906 Second, it compiles OneNAND IPL
11907 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
11908 The mechanism is similar with NAND boot except it boots from itself.
11910 Another thing is that you can only use the OneNAND IPL only to work
11911 other bootloader such as RedBoot and so on.
11913 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
11915 commit 21f6f9636f0e978397548751347425fbf8d42bb3
11916 Author: Andy Fleming <afleming@freescale.com>
11917 Date: Wed Jan 16 13:06:59 2008 -0600
11919 Fix CONFIG_MMC usage in fat code
11921 A #if statement in fat.c depended on CONFIG_MMC, instead of
11922 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
11923 as "1" rather than just defined. Now it's better.
11925 Signed-off-by: Andy Fleming <afleming@freescale.com>
11927 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
11928 Author: Rafal Jaworowski <raj@semihalf.com>
11929 Date: Tue Jan 15 12:52:31 2008 +0100
11931 ppc: Refactor cache routines, so there is only one common set.
11933 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
11935 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
11936 Author: Jon Loeliger <jdl@jdl.com>
11937 Date: Wed Jan 23 15:55:02 2008 -0600
11939 86xx: Fix compilation warning in sys_eprom.c
11941 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
11943 Signed-off-by: Jon Loeliger <jdl@freescale.com>
11945 commit 65230107025733e89e28fd5e5cfd916d4953c28a
11946 Author: Haavard Skinnemoen <hskinnemoen at>
11947 Date: Fri Feb 22 11:40:50 2008 +0000
11949 Move AT91RM9200DK board support under board/atmel
11951 We already have a vendor subdir for Atmel, so we should use it.
11953 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
11955 commit 6d0943a6be99977d6d853d51749e9963d68eb192
11956 Author: Andreas Engel <andreas.engel@ericsson.com>
11957 Date: Mon Jan 14 09:06:52 2008 +0000
11959 ARM: cleanup duplicated exception handlingcode
11961 Move duplicated exception handling code into lib_arm.
11963 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
11965 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
11966 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
11967 Date: Fri Feb 1 10:09:03 2008 +0000
11969 Support for Artila M-501 starter kit
11971 Kimmo Leppala / Sysart and
11972 Timo Tuunainen / Sysart
11974 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
11975 Author: Stelian Pop <stelian@popies.net>
11976 Date: Mon Feb 11 10:50:19 2008 +0000
11980 ---------------------------------
11982 read_dataflash() takes a signed char pointer as a parameter. Silence a
11983 few warnings dues to incorrect parameter types in env_dataflash.c.
11985 Signed-off-by: Stelian Pop <stelian@popies.net>
11987 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
11988 Author: Stelian Pop <stelian@popies.net>
11989 Date: Thu Feb 7 09:42:57 2008 +0000
11991 AT91CAP9 support : move board files to Atmel vendor directory.
11993 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
11995 Signed-off-by: Stelian Pop <stelian@popies.net>
11997 commit 7263ef191b87da94768f762c7093bedeb70db98f
11998 Author: Stelian Pop <stelian at>
11999 Date: Thu Jan 3 21:15:56 2008 +0000
12001 AT91CAP9 support : MACB changes
12003 Signed-off-by: Stelian Pop <stelian <at> popies.net>
12004 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
12006 commit 6afcabf11d7321850f4feaadfee841488ace54c5
12007 Author: Stelian Pop <stelian@popies.net>
12008 Date: Thu Feb 7 16:37:54 2008 +0000
12010 AT91CAP9 support : board/ files
12012 Signed-off-by: Stelian Pop <stelian@popies.net>
12014 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
12015 Author: Stelian Pop <stelian at>
12016 Date: Wed Jan 30 21:15:54 2008 +0000
12018 AT91CAP9 support : cpu/ files
12020 Signed-off-by: Stelian Pop <stelian <at> popies.net>
12022 commit fa506a926cec348805143576c941f8e61b333cc0
12023 Author: Stelian Pop <stelian@popies.net>
12024 Date: Thu Jan 31 21:15:53 2008 +0000
12026 AT91CAP9 support : include/ files
12028 Signed-off-by: Stelian Pop <stelian@popies.net>
12030 commit 20b197c6f2799af399a68f96a1aff543a75621b8
12031 Author: Stelian Pop <stelian@popies.net>
12032 Date: Sun Jan 20 19:49:21 2008 +0000
12034 AT91CAP9 support : build integration
12036 Signed-off-by: Stelian Pop <stelian@popies.net>
12038 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
12039 Author: Stelian Pop <stelian@popies.net>
12040 Date: Sun Jan 20 21:07:00 2008 +0000
12042 Improve DataFlash CS definition.
12044 Use a structure instead of the error prone unnamed array to
12045 define the possible dataflash banks.
12047 Signed-off-by: Stelian Pop <stelian@popies.net>
12049 commit a6cdd21b56014208706238712a853a9e9a0a2290
12050 Author: Stelian Pop <stelian@popies.net>
12051 Date: Sat Jan 19 21:09:35 2008 +0000
12053 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
12055 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
12057 cpu/arm926ejs/start.o: In function `cpu_init_crit':
12058 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
12060 Signed-off-by: Stelian Pop <stelian@popies.net>
12062 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
12063 Author: Peter Pearse <peter.pearse@arm.com>
12064 Date: Fri Feb 1 16:50:24 2008 +0000
12066 Fix timer overflow in DaVinci
12067 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
12069 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
12070 Author: Peter Pearse <peter.pearse@arm.com>
12071 Date: Fri Feb 1 16:49:08 2008 +0000
12073 Update board NetStar
12074 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
12076 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
12077 Author: Niklaus Giger <niklaus.giger@netstal.com>
12078 Date: Tue Feb 5 10:26:42 2008 +0100
12080 ppc4xx: HCU4/5. Fix make O=../xx
12082 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12084 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
12085 Author: Larry Johnson <lrj@acm.org>
12086 Date: Tue Jan 22 08:51:59 2008 -0500
12088 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
12090 Signed-off-by: Larry Johnson <lrj@acm.org>
12092 commit fe891ecf4d187e9d11dde869ed4623af52b54451
12093 Author: Hiroshi Ito <ito@mlb.co.jp>
12094 Date: Thu Jan 31 18:35:04 2008 +0900
12096 NFS Timeout with large files.
12098 Retry to send NFS packet before reaching timeout.
12100 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
12102 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
12103 Author: Johannes Stezenbach <js@sig21.net>
12104 Date: Tue Jan 29 00:11:25 2008 +0100
12106 Add dependencies to avoid race conditions with parallel make.
12108 Signed-off-by: Johannes Stezenbach <js@sig21.net>
12110 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
12111 Author: Mike Frysinger <vapier@gentoo.org>
12112 Date: Mon Jan 28 05:46:01 2008 -0500
12114 Mark board_init_[fr] as noreturn
12116 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12118 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
12119 Author: Mike Frysinger <vapier@gentoo.org>
12120 Date: Mon Jan 28 05:28:50 2008 -0500
12122 Only use TEXT_BASE if defined by the board
12124 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12126 commit 1b769881750030f10743808b9d6013e11f559350
12127 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12128 Date: Fri Jan 25 07:54:47 2008 +0100
12130 Fix remaining CONFIG_COMMANDS
12135 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12137 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
12138 Author: Niklaus Giger <niklaus.giger@netstal.com>
12139 Date: Mon Jan 21 16:46:00 2008 +0100
12141 Add *~ to .gitignore
12143 One should never add a backup file ending in with ~ to the git repository.
12145 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
12147 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
12148 Author: Kumar Gala <galak@kernel.crashing.org>
12149 Date: Thu Jan 17 00:02:10 2008 -0600
12151 Remove duplicate defines for ARRAY_SIZE
12153 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12155 commit c77ce474b1c57b13e9d36d9830f147966c143694
12156 Author: Stelian Pop <stelian@popies.net>
12157 Date: Mon Jan 14 22:08:14 2008 +0100
12159 Fix incorrect address test in AT91F_DataflashSelect().
12161 Signed-off-by: Stelian Pop <stelian@popies.net>
12163 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
12164 Author: Kumar Gala <galak@kernel.crashing.org>
12165 Date: Wed Feb 13 15:09:58 2008 -0600
12167 Fix building of fdt_support.c if DEBUG set
12169 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12171 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
12172 Author: Jon Loeliger <jdl@freescale.com>
12173 Date: Tue Feb 12 14:53:28 2008 -0600
12175 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
12177 These replace direct structure references for IMMR sections.
12179 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12181 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
12182 Author: Wolfgang Denk <wd@denx.de>
12183 Date: Tue Feb 12 00:45:06 2008 +0100
12185 Get rid of "#undef DEBUG" from board config files.
12187 Signed-off-by: Wolfgang Denk <wd@denx.de>
12189 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
12190 Author: Timur Tabi <timur@freescale.com>
12191 Date: Tue Jan 15 17:09:41 2008 -0600
12193 Remove #undef DEBUG from MPC83xx board header files
12195 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
12196 The inclusion of this line makes it impossible to enable debug code in
12197 other source files, because "#define DEBUG" typically needs to be defined
12198 before any header files are included.
12200 Signed-off-by: Timur Tabi <timur@freescale.com>
12202 commit 69018ce2e086e9caf35b914d675b82bc4888f077
12203 Author: Kumar Gala <galak@kernel.crashing.org>
12204 Date: Thu Jan 17 08:25:45 2008 -0600
12206 QE: Move FDT support into a common file
12208 Move the flat device tree setup for QE related devices into
12209 a common file shared between 83xx & 85xx platforms that have QE's.
12211 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12213 commit 5cf746c303710329f8040d9c62ee354313e3e91f
12214 Author: Marian Balakowicz <m8@semihalf.com>
12215 Date: Thu Jan 31 13:59:09 2008 +0100
12217 [new uImage] Move kernel data find code to get_kernel() routine
12219 Verification of the kernel image (in old format) and finding kernel
12220 data is moved to a dedicated routine. The routine will also hold
12221 support for, to be added, new image format.
12223 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12225 commit 7b325454fd231d4273de3fe373850f777fb086bf
12226 Author: Marian Balakowicz <m8@semihalf.com>
12227 Date: Thu Jan 31 13:58:20 2008 +0100
12229 [new uImage] Cleanup FDT handling in PPC do_boot_linux()
12231 Move FDT blob finding and relocation to a dedicated
12232 get_fdt() routine. It increases code readability and
12233 will make adding support for new uImage format easier.
12235 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12237 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
12238 Author: Marian Balakowicz <m8@semihalf.com>
12239 Date: Thu Jan 31 13:58:13 2008 +0100
12241 [new uImage] Cleanup do_botm_linux() boot allocations
12243 This patch moves common pre-boot allocation steps shared between PPC
12244 and M68K to a helper routines:
12247 - get_boot_sp_limit()
12248 - get_boot_cmline()
12252 - set_clocks_in_mhz()
12254 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12256 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
12257 Author: Marian Balakowicz <m8@semihalf.com>
12258 Date: Thu Jan 31 13:57:17 2008 +0100
12260 [new uImage] Move ramdisk loading to a common routine
12262 Ramdisk loading code, including initrd_high variable handling,
12263 was duplicated for PPC and M68K platforms. This patch creates
12264 common helper routine that is being called from both platform
12265 do_bootm_linux() routines.
12267 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12269 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
12270 Author: Marian Balakowicz <m8@semihalf.com>
12271 Date: Thu Jan 31 13:55:53 2008 +0100
12273 [new uImage] Removed dead ramdisk code on microblaze architectures
12275 Microblaze do_bootm_linux() includes ramdisk processing code but
12276 the ramdisk does not get used anywhere later on.
12278 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12280 commit 5ad03eb3854c162684222a718b44c0716ea0db03
12281 Author: Marian Balakowicz <m8@semihalf.com>
12282 Date: Thu Jan 31 13:55:39 2008 +0100
12284 [new uImage] Factor out common image_get_ramdisk() routine
12286 Architecture specific do_bootm_linux() routines share common
12287 ramdisk image processing code. Move this code to a common
12290 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12292 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
12293 Author: Marian Balakowicz <m8@semihalf.com>
12294 Date: Thu Jan 31 13:20:08 2008 +0100
12296 [new uImage] Move FDT error printing to common fdt_error() routine
12298 FDT error handling in PPC do_bootm_linux() shares the same message format.
12299 This patch moves error message printing to a helper fdt_error() routine.
12301 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12302 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
12304 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
12305 Author: Marian Balakowicz <m8@semihalf.com>
12306 Date: Thu Jan 31 13:20:07 2008 +0100
12308 [new uImage] Factor out common routines for getting os/arch/type/comp names
12310 Move numeric-id to name translation for image os/arch/type/comp header
12311 fields to a helper routines: image_get_os_name(), image_get_arch_name(),
12312 image_get_type_name(), image_get_comp_name().
12314 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12316 commit e99c26694a384221d336f6448c06a57479c0baa4
12317 Author: Marian Balakowicz <m8@semihalf.com>
12318 Date: Thu Jan 31 13:20:07 2008 +0100
12320 [new uImage] Remove standalone applications handling from boootm
12322 Standalone applications are supposed to be run using the "go" command.
12323 This patch removes standalone images handling from the do_bootm().
12325 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12327 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
12328 Author: Marian Balakowicz <m8@semihalf.com>
12329 Date: Thu Jan 31 13:20:07 2008 +0100
12331 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
12333 Support for OF_FLAT_TREE is to be obsoleted in the near future,
12334 remove related code from the bootm routines.
12336 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12338 commit 82850f3d32a2661868ec6876bed7a22c55cef718
12339 Author: Marian Balakowicz <m8@semihalf.com>
12340 Date: Thu Jan 31 13:20:06 2008 +0100
12342 [new uImage] Use image API in SH do_bootm_linux() routine
12344 Introduce image handling API for lately added Hitachi SH architecture.
12346 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12348 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
12349 Author: Marian Balakowicz <m8@semihalf.com>
12350 Date: Thu Jan 31 13:20:06 2008 +0100
12352 [new uImage] Rename architecture specific bootm code files
12354 Implementation of the do_bootm_linux() and other bootm helper routines is
12355 architecture specific code. As such it resides in lib_<arch> directories
12356 in files named <arch>_linux.c
12358 This patch renames those files to a more clear and accurate
12359 lib_<arch>/bootm.c form.
12361 List of the renamed files:
12362 lib_arm/armlinux.c -> lib_arm/bootm.c
12363 lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
12364 lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
12365 lib_i386/i386_linux.c -> lib_i386/bootm.c
12366 lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
12367 lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
12368 lib_mips/mips_linux.c -> lib_mips/bootm.c
12369 lib_nios/nios_linux.c -> lib_nios/bootm.c
12370 lib_nios2/nios_linux.c -> lib_nios2/bootm.c
12371 lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
12372 lib_sh/sh_linux.c -> lib_sh/bootm.c
12374 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12376 commit 7582438c285bf0cef82909d0f232de64ec567a8a
12377 Author: Marian Balakowicz <m8@semihalf.com>
12378 Date: Thu Jan 31 13:20:06 2008 +0100
12380 [new uImage] Return error on image move/uncompress overwrites
12382 Check for overwrites during image move/uncompress, return with error
12383 when the original image gets corrupted. Report clear message to the user
12384 and prevent further troubles when pointer to the corrupted images is passed
12385 to do_bootm_linux routine.
12387 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12389 commit f13e7b2e993c61fed1f607962501e051940d6e80
12390 Author: Marian Balakowicz <m8@semihalf.com>
12391 Date: Tue Jan 8 18:12:17 2008 +0100
12393 [new uImage] Cleanup image header pointer use in bootm code
12395 - use single image header pointer instead of a set of auxilliary variables.
12396 - add multi component image helper routines: get component size/data address
12398 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12400 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
12401 Author: Marian Balakowicz <m8@semihalf.com>
12402 Date: Tue Jan 8 18:17:10 2008 +0100
12404 [new uImage] Cleanup cmd_bootm.c
12406 - sort and cleanup headers, declarations, etc.
12407 - group related routines
12408 - cleanup indentation, white spaces
12410 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12412 commit af13cdbc01eaf88880978bfb4f603e012818ba24
12413 Author: Marian Balakowicz <m8@semihalf.com>
12414 Date: Tue Jan 8 18:11:45 2008 +0100
12416 [new uImage] Add memmove_wd() common routine
12418 Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
12420 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12422 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
12423 Author: Marian Balakowicz <m8@semihalf.com>
12424 Date: Tue Jan 8 18:11:44 2008 +0100
12426 [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
12428 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12430 commit 15158971f49255ccef54f0979a942cfd3de2ae52
12431 Author: Marian Balakowicz <m8@semihalf.com>
12432 Date: Tue Jan 8 18:11:44 2008 +0100
12434 [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
12436 Use image header copy instead of a (possibly corrupted) pointer to
12437 a initial image location.
12439 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12441 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
12442 Author: Marian Balakowicz <m8@semihalf.com>
12443 Date: Tue Jan 8 18:11:44 2008 +0100
12445 [new uImage] Remove I386 uImage fake_header() routine
12447 I386 targets are not using a uImage format, instead fake header
12448 is added to ram image before it is further processed by bootm.
12450 Remove this fixup and force proper uImage use for I386.
12452 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12454 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
12455 Author: Marian Balakowicz <m8@semihalf.com>
12456 Date: Tue Jan 8 18:11:44 2008 +0100
12458 [new uImage] Move CHUNKSZ definition to image.h
12460 CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
12461 move this definition to a common header.
12463 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12465 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
12466 Author: Marian Balakowicz <m8@semihalf.com>
12467 Date: Tue Jan 8 18:11:43 2008 +0100
12469 [new uImage] Move gunzip() common code to common/gunzip.c
12471 Move gunzip(), zalloc() and zfree() to a separate file.
12472 Share zalloc() and zfree() with cramfs uncompress routine.
12474 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12476 commit d45d5a18b6b36688f2365623f9d550566c664b5b
12477 Author: Marian Balakowicz <m8@semihalf.com>
12478 Date: Tue Jan 8 18:11:43 2008 +0100
12480 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
12482 Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
12483 readable in PPC variant of do_bootm_linux() routine.
12485 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12487 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
12488 Author: Marian Balakowicz <m8@semihalf.com>
12489 Date: Tue Jan 8 18:11:43 2008 +0100
12491 [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
12493 PPC implementation of do_bootm_linux() routine is moved to
12494 a dedicated file lib_ppc/ppc_linux.c
12496 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12498 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
12499 Author: Marian Balakowicz <m8@semihalf.com>
12500 Date: Tue Jan 8 18:14:09 2008 +0100
12502 [new uImage] Define a API for image handling operations
12504 - Add inline helper macros for basic header processing
12505 - Move common non inline code common/image.c
12506 - Replace direct header access with the API routines
12507 - Rename IH_CPU_* to IH_ARCH_*
12509 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12511 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
12512 Author: Marian Balakowicz <m8@semihalf.com>
12513 Date: Thu Jan 31 13:19:58 2008 +0100
12515 Add missing cmd_ximg.o to common/Makefile
12517 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
12519 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
12520 Author: Grzegorz Bernacki <gjb@semihalf.com>
12521 Date: Mon Jan 28 10:15:02 2008 +0100
12523 ADS5121e: DDR2 init/timing update.
12525 Signed-off-by: John Rigby <jrigby@freescale.com>
12526 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
12528 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
12529 Author: John Rigby <jrigby@freescale.com>
12530 Date: Wed Jan 30 13:36:57 2008 -0700
12532 Device tree updates
12534 Changes to match 5121 device tree going mainline in 2.6.25.
12536 Change OF_SOC from "soc5121" to plain "soc".
12537 Remove unneeded "ref-frequency" fixups.
12538 Remove "address" enetaddr fixup.
12540 Add bus-frequency fixup for old OF_SOC so old
12541 kernels with old device trees will work with new
12542 u-boot with 66MHz IPS clock
12544 Signed-off-by: John Rigby <jrigby@freescale.com>
12546 commit de55d18df3ff2ea614624e74793de7c43520e0e7
12547 Author: John Rigby <jrigby@freescale.com>
12548 Date: Wed Jan 30 13:36:56 2008 -0700
12550 Change IPS freq to 66MHz
12552 Recommended frequency is 66MHz
12553 Change divider from 4 to 3.
12555 Signed-off-by: John Rigby <jrigby@freescale.com>
12557 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
12558 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12559 Date: Mon Jan 14 22:38:55 2008 +0100
12561 xsengine: rename board_post_init to board_late_init
12563 missing migration from "Cleanup of some init functions"
12564 in c837dcb1a316745092567bfe4fb266d0941884ff
12566 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12568 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
12569 Author: Larry Johnson <lrj@acm.org>
12570 Date: Sat Jan 12 23:35:33 2008 -0500
12572 Add attribute POST_PREREL to ECC memory POST
12574 Signed-off-by: Larry Johnson <lrj@acm.org>
12576 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
12577 Author: Kumar Gala <galak@kernel.crashing.org>
12578 Date: Thu Jan 17 08:25:45 2008 -0600
12580 QE: Move FDT support into a common file
12582 Move the flat device tree setup for QE related devices into
12583 a common file shared between 83xx & 85xx platforms that have QE's.
12585 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12587 commit d38da537943cd36356b9d3d9d9b60533554b81d8
12588 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12589 Date: Wed Jan 23 17:20:14 2008 +0100
12591 AVR32: Make SDRAM refresh rate configurable
12593 The existing code assumes the SDRAM row refresh period should always
12594 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
12595 refresh rate should really be 7.81 us.
12597 Add a refresh_period member to struct sdram_info and initialize it
12598 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
12599 panic() until the refresh_period member is updated properly.
12601 Big thanks to Gerhard Berghofer for pointing out this issue.
12603 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12605 commit 61151cccb660cdb06a07fb283de6089913d7bde0
12606 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12607 Date: Thu Apr 19 10:10:11 2007 +0200
12609 ATSTK1000: Fix potential flash programming bug
12611 The (now obsolete) atngw100 flash programming code was having problems
12612 programming the onboard at49bv642 chip. The atstk1000 flash
12613 programming code may have the same bug, so import fix for this problem
12614 from the AVR32 Linux BSP.
12616 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12618 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
12619 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12620 Date: Thu Nov 22 17:04:13 2007 +0100
12622 ATSTK1004: Fix comment about default load address
12624 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
12625 wouldn't have worked anyway since the board can only access 4MB of
12628 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12630 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
12631 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12632 Date: Thu Nov 22 17:01:24 2007 +0100
12634 ATSTK1002: Use SDRAM + 4MB as default load address
12636 Many people run into problems when they compile a big kernel and load
12637 the uImage at the default SDRAM + 2MB address as the kernel will
12638 overwrite the uImage as it is being unpacked. Increase the default
12639 load address so that we can load a 4MB kernel image without any
12642 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12644 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
12645 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
12646 Date: Thu Nov 22 16:51:39 2007 +0100
12648 ATNGW100: Fix default mtest range
12650 Let mtest cover the whole SDRAM except the last megabyte, which is
12651 where u-boot lives.
12653 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
12655 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
12656 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12657 Date: Tue Jan 22 15:31:56 2008 +0900
12659 sh: Fix register address of SH7722.
12661 The address of SH7722 is wrong by old document.
12662 This patch fixes this problem.
12664 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
12666 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
12667 Author: Mike Frysinger <vapier@gentoo.org>
12668 Date: Mon Feb 4 19:26:57 2008 -0500
12670 new command for displaying strings at specified memory locations
12672 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12674 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
12675 Author: Mike Frysinger <vapier@gentoo.org>
12676 Date: Mon Feb 4 19:26:57 2008 -0500
12678 rewrite/cleanup Blackfin RTC driver
12680 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12682 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
12683 Author: Mike Frysinger <vapier@gentoo.org>
12684 Date: Mon Feb 4 19:26:57 2008 -0500
12686 generate u-boot.ldr for Blackfin targets
12688 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12690 commit b779f7a59530436040f157f7841db7ab796542df
12691 Author: Mike Frysinger <vapier@gentoo.org>
12692 Date: Mon Feb 4 19:26:57 2008 -0500
12694 scrub unused symbols
12696 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12698 commit cc2977acc3bbbb7850f16645dd1081f95335868d
12699 Author: Mike Frysinger <vapier@gentoo.org>
12700 Date: Mon Feb 4 19:26:57 2008 -0500
12702 move Blackfin cpu object list to respective cpu directories
12704 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12706 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
12707 Author: Mike Frysinger <vapier@gentoo.org>
12708 Date: Mon Feb 4 19:26:57 2008 -0500
12710 interface to Blackfin on-chip One-Time-Programmable memory
12712 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12714 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
12715 Author: Mike Frysinger <vapier@gentoo.org>
12716 Date: Mon Feb 4 19:26:56 2008 -0500
12718 add support for memory commands with Blackfin L1 instruction memory
12720 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12722 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
12723 Author: Mike Frysinger <vapier@gentoo.org>
12724 Date: Mon Feb 4 19:26:56 2008 -0500
12726 use C code rather than inline assembly
12728 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12730 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
12731 Author: Mike Frysinger <vapier@gentoo.org>
12732 Date: Mon Feb 4 19:26:56 2008 -0500
12734 add Blackfin-specific reginfo command
12736 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12738 commit 0858b835e7ea501ea084d34cef75932f098342bb
12739 Author: Mike Frysinger <vapier@gentoo.org>
12740 Date: Mon Feb 4 19:26:55 2008 -0500
12742 add support for Blackfin symbol prefixes to examples
12744 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12746 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
12747 Author: Mike Frysinger <vapier@gentoo.org>
12748 Date: Mon Feb 4 19:26:55 2008 -0500
12750 add Blackfin-specific bdinfo command
12752 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12754 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
12755 Author: Mike Frysinger <vapier@gentoo.org>
12756 Date: Mon Feb 4 19:26:55 2008 -0500
12758 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
12760 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12762 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
12763 Author: Mike Frysinger <vapier@gentoo.org>
12764 Date: Mon Feb 4 19:26:55 2008 -0500
12766 unify the Blackfin board targets
12768 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12770 commit d4d7730853e5d675f76ec666807da3028c91d592
12771 Author: Mike Frysinger <vapier@gentoo.org>
12772 Date: Mon Feb 4 19:26:55 2008 -0500
12774 punt Blackfin VDSP headers and import sanitized/auto-generated ones
12776 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12778 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
12779 Author: Mike Frysinger <vapier@gentoo.org>
12780 Date: Mon Feb 4 19:26:54 2008 -0500
12782 always pull in asm/blackfin.h for Blackfin ports
12784 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12786 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
12787 Author: Mike Frysinger <vapier@gentoo.org>
12788 Date: Mon Feb 4 19:26:54 2008 -0500
12790 add missing __raw versions of Blackfin read/write io functions
12792 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12794 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
12795 Author: Mike Frysinger <vapier@gentoo.org>
12796 Date: Mon Feb 4 19:26:54 2008 -0500
12798 add the default Blackfin logo used by Blackfin boards with splash screens
12800 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12802 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
12803 Author: Mike Frysinger <vapier@gentoo.org>
12804 Date: Mon Feb 4 19:26:54 2008 -0500
12806 add some more Blackfin docs
12808 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12810 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
12811 Author: Mike Frysinger <vapier@gentoo.org>
12812 Date: Mon Feb 4 19:26:54 2008 -0500
12814 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
12816 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12818 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
12819 Author: Mike Frysinger <vapier@gentoo.org>
12820 Date: Mon Feb 4 19:26:54 2008 -0500
12822 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
12824 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12826 commit b45264ee85cbd92020640a32e02fb434fd557108
12827 Author: Mike Frysinger <vapier@gentoo.org>
12828 Date: Mon Feb 4 19:26:53 2008 -0500
12830 add gitignores for Blackfin pieces
12832 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
12834 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
12835 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12836 Date: Fri Jan 18 01:14:03 2008 +0100
12838 TFTP: add host ip addr support
12840 allow to use a different server as set in serverip
12841 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
12842 if not defined the max length will be at 128
12844 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12846 commit e56b4b494cd92def577969f9678395aa22d34c9f
12847 Author: Timur Tabi <timur@freescale.com>
12848 Date: Wed Jan 9 14:35:26 2008 -0600
12850 85xx,86xx: Determine I2C clock frequencies and store in global_data
12852 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
12854 Update the get_clocks() function in 85xx and 86xx to determine the I2C
12855 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
12857 Signed-off-by: Timur Tabi <timur@freescale.com>
12859 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
12860 Author: Wolfgang Denk <wd@denx.de>
12861 Date: Thu Dec 27 10:56:54 2007 +0100
12863 OMAP5912: fix FIFO handling in UART driver
12865 According to the OMAP5912 Serial Interfaces Reference Guide (see
12866 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
12867 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
12868 changed when the baud clock is not running, i. e. when both DLL and
12871 Thus make sure that DLL and DLH are 0 when writing the FCR.
12873 Signed-off-by: Wolfgang Denk <wd@denx.de>
12875 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
12876 Author: Harald Welte <laforge@openmoko.org>
12877 Date: Wed Dec 19 15:10:52 2007 +0100
12879 ARM: S3C24x0 SoC NAND controller support
12881 This patch adds NAND support to the S3C24x0 SoC code in u-boot
12883 Signed-off-by: Harald Welte <laforge@openmoko.org>
12885 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
12886 Author: Harald Welte <laforge@openmoko.org>
12887 Date: Wed Dec 19 14:24:40 2007 +0100
12889 ARM: s3c24xx: Multiple serial port support
12891 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
12893 Signed-off-by: Harald Welte <laforge@openmoko.org>
12895 commit a25f72f1f73a11de68251fb88c89991e202e68fa
12896 Author: Harald Welte <laforge@openmoko.org>
12897 Date: Wed Dec 19 14:16:57 2007 +0100
12899 ARM: arm920t: Allow use of 'gd' pointer from IRQ
12901 This patch allows us to use the 'gd' pointer (and thus environment
12902 and everything else associated with it) from interrupt context on
12905 Signed-off-by: Harald Welte <laforge@openmoko.org>
12907 commit be19bd5cd0f454b63298844a0b5377e029b2caad
12908 Author: Harald Welte <laforge@openmoko.org>
12909 Date: Wed Dec 19 14:19:38 2007 +0100
12911 ARM: arm920/s3c24xx: IRQ demulitplexer callback
12913 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
12914 plus a stub implementation of it for the S3C2410.
12916 The purpose is to allow arm920t implementations such as the s3c24x0 to
12917 implement interrupt handlers in u-boot without having to touch core
12920 Signed-off-by: Harald Welte <laforge@openmoko.org>
12922 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
12923 Author: Hebbar <gururajakr@sanyo.co.in>
12924 Date: Tue Dec 18 16:03:07 2007 -0800
12926 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
12928 Add ifdef to bdinfo command to display ethernet information
12929 only if CONFIG_CMD_NET is defined for arm modules.
12931 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
12933 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
12934 Author: Hebbar <gururajakr@sanyo.co.in>
12935 Date: Tue Dec 18 16:00:54 2007 -0800
12937 ARM: add I2C init function call in lib_arm/board.c
12939 Adds I2C init func call to init sequence for ARM boards. This is
12940 present in ppc,blackfin and other processor init sequence.
12942 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
12944 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
12945 Author: Stefan Roese <sr@denx.de>
12946 Date: Fri Feb 1 09:38:29 2008 +0100
12948 ppc4xx: Fix ndfc HW ECC byte order
12950 The current ndfc HW ECC implementation swaps the first two ECC bytes.
12951 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
12952 so this swapping in the HW ECC driver is bogus. This patch fixes this
12953 problem and now really uses the SMC ECC byte order.
12955 Thanks to Sean MacLennan for pointing this out.
12957 Signed-off-by: Stefan Roese <sr@denx.de>
12959 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
12960 Author: Stefan Roese <sr@denx.de>
12961 Date: Wed Jan 30 15:35:50 2008 +0100
12963 ppc4xx: Fix GPIO configuration for pcs440ep
12965 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
12966 49-63 for GPIO. They have been configured as trace signals. This patch
12967 fixes this by clearing the corresponding bit.
12969 Signed-off-by: Stefan Roese <sr@denx.de>
12971 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
12972 Author: Stefan Roese <sr@denx.de>
12973 Date: Wed Jan 30 14:48:28 2008 +0100
12975 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
12977 Signed-off-by: Stefan Roese <sr@denx.de>
12979 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
12980 Author: Ladislav Michl <ladis@linux-mips.org>
12981 Date: Fri Dec 7 00:42:32 2007 +0100
12983 ARM: Board voiceblue update
12985 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
12987 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
12988 Author: Ladislav Michl <ladis@linux-mips.org>
12989 Date: Thu Dec 6 23:24:57 2007 +0100
12991 ARM: AT91RM9200 based boards config cleanup
12993 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
12995 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
12998 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
12999 Author: Ladislav Michl <ladis@linux-mips.org>
13000 Date: Thu Dec 6 22:59:16 2007 +0100
13002 ARM: Fix at91rm9200dk base address
13004 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
13005 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
13006 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
13007 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
13008 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
13009 I'm sending this patch 4th (!) time in hope it produces at least some
13012 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
13014 Fix at91rm9200dk base and environment address.
13016 commit c95219fae2a7add7daa2f91aedca65b1698465c7
13017 Author: stefano babic <sbabic@denx.de>
13018 Date: Tue Nov 20 10:40:24 2007 +0100
13020 MMC for PXA 27X (resubmit)
13022 MMC support for X_Scale PXA is broken and does not work.
13023 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
13024 There were already some patches around the world but none of them was
13025 merged into the official u-boot tree.
13027 This patch makes order fixing this issue. Resubmit after code cleanup.
13029 Applied and tested on PXA 270 (TrizepsIV module).
13031 Signed-off-by: Stefano Babic <sbabic@denx.de>
13033 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
13034 Author: stefano babic <sbabic@denx.de>
13035 Date: Tue Nov 20 10:37:04 2007 +0100
13037 Fix gcc issues in pxa-regs.h
13039 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
13040 issues generates wrong code.
13041 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
13042 This patch fixes the problem and solves the gcc-4 issues as the linux
13045 Signed-off-by: Stefano Babic <sbabic@denx.de>
13046 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
13048 commit 7047b388876e7b905b2ec4edb8010543e3641b85
13049 Author: Jens Gehrlein <sew_s@tqs.de>
13050 Date: Tue Jan 29 08:45:03 2008 +0100
13052 TQM834x: enable DHCP
13054 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
13055 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13057 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
13058 Author: Jens Gehrlein <sew_s@tqs.de>
13059 Date: Tue Jan 29 08:45:02 2008 +0100
13061 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
13063 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
13064 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13066 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
13067 Author: Ben Warren <biggerbadderben@gmail.com>
13068 Date: Sat Jan 26 23:41:19 2008 -0500
13070 Fix conditional compilation of mpx8xxx_spi driver
13072 This driver should only compile if CONFIG_MPC8XXX_SPI is set
13074 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13075 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13077 commit 63f732d3d3880feb531f48af247c025bf01462b0
13078 Author: Rafal Jaworowski <raj@semihalf.com>
13079 Date: Tue Jan 29 17:00:34 2008 +0100
13081 API: Provide dummy halt() in the glue layer.
13083 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
13085 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13087 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
13088 Author: Rafal Jaworowski <raj@semihalf.com>
13089 Date: Tue Jan 29 16:57:38 2008 +0100
13091 API: Convert conditional building to the new scheme.
13093 This fixes a build breakage with CONFIG_API enabled, which appeared after
13094 the recent changes in the U-Boot build system.
13096 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
13098 commit 98b742489c09780be6a832eeaa4e5eff824792bb
13099 Author: Wolfgang Denk <wd@denx.de>
13100 Date: Fri Jan 25 09:56:17 2008 +0100
13102 inka4x0: remove dead code
13104 Signed-off-by: Wolfgang Denk <wd@denx.de>
13106 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
13107 Author: Becky Bruce <becky.bruce@freescale.com>
13108 Date: Wed Jan 23 16:31:06 2008 -0600
13110 86xx: Add reginfo command
13112 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13114 commit ddcebcb638715a6278da93b553d5016f99823816
13115 Author: Becky Bruce <becky.bruce@freescale.com>
13116 Date: Wed Jan 23 16:31:05 2008 -0600
13118 86xx: Add print_laws function to fsl_law.c
13120 This can be used for debug, and will be used by board code
13121 to help implement reginfo.
13123 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13125 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
13126 Author: Becky Bruce <becky.bruce@freescale.com>
13127 Date: Wed Jan 23 16:31:04 2008 -0600
13129 86xx: Remove old-style law setup code
13131 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
13133 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13135 commit 713d8186649dae874613d495b0cecaa039a98b30
13136 Author: Becky Bruce <becky.bruce@freescale.com>
13137 Date: Wed Jan 23 16:31:03 2008 -0600
13139 86xx: Convert sbc8641d to use new law setup code.
13141 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13143 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
13144 Author: Becky Bruce <becky.bruce@freescale.com>
13145 Date: Wed Jan 23 16:31:02 2008 -0600
13147 86xx: Convert mpc8610hpcd to new law setup method.
13149 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13151 commit 4933b91f8a49e436681f163df3173beb91cac44a
13152 Author: Becky Bruce <becky.bruce@freescale.com>
13153 Date: Wed Jan 23 16:31:01 2008 -0600
13155 86xx: Support new law setup method and convert mpc8641
13157 Adds the support code in cpu/mpc86xx for the new law setup code
13158 recently created fsl_law.c, and changes the MPC8641HPCN config
13161 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13163 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
13164 Author: Becky Bruce <becky.bruce@freescale.com>
13165 Date: Wed Jan 23 16:31:00 2008 -0600
13167 86xx: Rearrange the sequence in start.S
13169 * split the BAT initialization so that only 2 BATs (for the boot page
13170 and stack) are programmed very early on. The rest are initialized later.
13171 * Move other BAT setup, ccsrbar setup, and law setup later in the code
13172 after translation has been enabled.
13174 These changes will facilitate the moving of law and BAT initialization
13175 to C code, and will aid with 36-bit physical addressing support.
13177 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13179 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
13180 Author: Wolfgang Denk <wd@denx.de>
13181 Date: Wed Jan 23 14:41:37 2008 +0100
13183 Coding Style Cleanup; update CHANGELOG
13185 Signed-off-by: Wolfgang Denk <wd@denx.de>
13187 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
13188 Author: Wolfgang Denk <wd@denx.de>
13189 Date: Wed Jan 23 14:31:17 2008 +0100
13191 Coding Style Cleanup; update CHANGELOG
13193 Signed-off-by: Wolfgang Denk <wd@denx.de>
13195 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
13196 Author: Dave Liu <r63238@freescale.com>
13197 Date: Fri Jan 18 10:07:04 2008 +0800
13199 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
13201 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
13202 cause the 83xx immap broken, so the DMA and PCI will
13205 The patch fix the struct spi8xxx and rm struct spi83xx.
13207 Signed-off-by: Dave Liu <daveliu@freescale.com>
13208 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13210 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
13211 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13212 Date: Sat Apr 14 17:11:49 2007 +0200
13214 AVR32: ATNGW100 board support
13216 Add support for the ATNGW100 Network Gateway reference design,
13217 including flash, ethernet and MMC support.
13219 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13221 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
13222 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
13223 Date: Sat Nov 24 18:15:31 2007 +0100
13225 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
13227 I don't know why the relevant layers can't do this by itself, but this
13230 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
13232 commit 799891ef7b1b3432032ec23466df6b665a797fa4
13233 Author: Michael Schwingen <michael@schwingen.org>
13234 Date: Fri Jan 18 00:04:28 2008 +0100
13236 Add AcTux board support
13240 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
13242 contain changes for multiple boards, the board-specific files follow as
13245 Signed-off-by: Michael Schwingen <michael@schwingen.org>
13247 commit 66a4344a4d910a11125df7768899ad529719855e
13248 Author: Michael Schwingen <michael@schwingen.org>
13249 Date: Wed Jan 16 19:53:23 2008 +0100
13251 add AcTux-4 board support
13253 Signed-off-by: Michael Schwingen <michael@schwingen.org>
13255 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
13256 Author: Michael Schwingen <michael@schwingen.org>
13257 Date: Wed Jan 16 19:51:55 2008 +0100
13259 add AcTux-3 board support
13261 Signed-off-by: Michael Schwingen <michael@schwingen.org>
13263 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
13264 Author: Michael Schwingen <michael@schwingen.org>
13265 Date: Wed Jan 16 19:51:14 2008 +0100
13267 add AcTux-2 board support
13269 Signed-off-by: Michael Schwingen <michael@schwingen.org>
13271 commit ea99e8f05b7240fd657739e286664664ae160abe
13272 Author: Michael Schwingen <michael@schwingen.org>
13273 Date: Wed Jan 16 19:50:37 2008 +0100
13275 add AcTux-1 board support
13277 Signed-off-by: Michael Schwingen <michael@schwingen.org>
13279 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
13280 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13281 Date: Mon Jan 14 19:20:08 2008 +0100
13283 ARM: remove useless function board_post_init
13285 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13287 commit 96bd462942022e4569b582c072a0ed26de1cd19b
13288 Author: Michael Schwingen <michael@schwingen.org>
13289 Date: Thu Jan 10 14:59:46 2008 +0100
13293 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
13294 No handshaking is done, but the active RTS signal allows to
13295 connect to the target using a PC which is using RTS/CTS
13296 handshake, and does no harm if the PC is set to ignore RTS.
13298 Signed-off-by: Michael Schwingen <michael@schwingen.org>
13300 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
13301 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13302 Date: Mon Jan 7 08:41:34 2008 +0100
13304 IXP: add dynamic microcode addr
13306 allow to load the microde from flash or ram by download it through
13307 the serial or other.
13309 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13310 Acked-by: Stefan Roese <sr@denx.de>
13312 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
13313 Author: Michael Schwingen <michael@schwingen.org>
13314 Date: Sat Nov 10 15:44:12 2007 +0100
13316 load ixp42x NPE firmware from separate flash block, remove dead code
13320 the following patch adds support to move the IXP42X NPE firmware to a
13321 separate flash block, whose start address is defined in
13322 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
13323 NPE-enabled u-boot without copyright problems due to the NPE firmware.
13325 I hope the patch applies, I get whitespace-related differences in the NPE
13326 files due to trailing whitespace in the original versions.
13328 Signed-off-by: Michael Schwingen <michael@schwingen.org>
13329 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13331 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
13332 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13333 Date: Tue Jan 15 14:15:46 2008 -0600
13335 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
13337 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13338 Signed-off by: John Rigby <jrigby@freescale.com>
13340 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
13341 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13342 Date: Tue Jan 15 14:02:49 2008 -0600
13344 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
13346 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13347 Signed-off by: John Rigby <jrigby@freescale.com>
13349 commit 777d1abd9796f1c2e148417cc10657e847d318ce
13350 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13351 Date: Tue Jan 15 14:00:25 2008 -0600
13353 ColdFire: Add MCF547x_8x FEC driver
13355 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13356 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13357 Signed-off by: John Rigby <jrigby@freescale.com>
13359 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
13360 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13361 Date: Tue Jan 15 13:54:09 2008 -0600
13363 ColdFire: Add MCF547x_8x dma code and header files
13365 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13366 Signed-off by: John Rigby <jrigby@freescale.com>
13368 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
13369 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13370 Date: Tue Jan 15 13:52:03 2008 -0600
13372 ColdFire: Add MCF547x_8x dma code - 2
13374 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13375 Signed-off by: John Rigby <jrigby@freescale.com>
13377 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
13378 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13379 Date: Tue Jan 15 13:48:52 2008 -0600
13381 ColdFire: Add MCF547x_8x dma code - 1
13383 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13384 Signed-off by: John Rigby <jrigby@freescale.com>
13386 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
13387 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13388 Date: Tue Jan 15 13:39:44 2008 -0600
13390 ColdFire: Add MCF547x_8x related header files
13392 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13393 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13394 Signed-off by: John Rigby <jrigby@freescale.com>
13396 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
13397 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13398 Date: Tue Jan 15 13:37:34 2008 -0600
13400 ColdFire: Add MCF547x_8x cpu arch
13402 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13403 Signed-off by: John Rigby <jrigby@freescale.com>
13405 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
13406 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13407 Date: Mon Jan 14 17:47:23 2008 -0600
13409 ColdFire: Add MCF5227x cpu and M52277EVB support-3
13411 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13412 Signed-off by: John Rigby <jrigby@freescale.com>
13414 commit c87581027994c148131b2f11aa75501f782ec19a
13415 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13416 Date: Mon Jan 14 17:46:19 2008 -0600
13418 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
13420 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13421 Signed-off by: John Rigby <jrigby@freescale.com>
13423 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
13424 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13425 Date: Mon Jan 14 17:43:33 2008 -0600
13427 ColdFire: Add MCF5227x cpu and M52277EVB support-1
13429 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13430 Signed-off by: John Rigby <jrigby@freescale.com>
13432 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
13433 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13434 Date: Mon Jan 14 17:35:44 2008 -0600
13436 ColdFire: Fix CFI Flash low level Read/Write macro
13438 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13439 Signed-off by: John Rigby <jrigby@freescale.com>
13441 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
13442 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13443 Date: Mon Jan 14 17:23:08 2008 -0600
13445 ColdFire: Add M5373EVB platform support - 2
13447 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13448 Signed-off by: John Rigby <jrigby@freescale.com>
13450 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
13451 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13452 Date: Mon Jan 14 17:19:54 2008 -0600
13454 ColdFire: Add M5373EVB platform support - 1
13456 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13457 Signed-off by: John Rigby <jrigby@freescale.com>
13459 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
13460 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13461 Date: Mon Jan 14 17:17:03 2008 -0600
13463 ColdFire: Update FlexBus CS for MCF532x
13465 Definition update and change from 16bit to 32bit
13467 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13468 Signed-off by: John Rigby <jrigby@freescale.com>
13470 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
13471 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13472 Date: Mon Jan 14 17:11:47 2008 -0600
13474 ColdFire: PCI and misc updates for MCF5445x
13476 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13477 Signed-off by: John Rigby <jrigby@freescale.com>
13479 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
13480 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13481 Date: Mon Jan 14 17:06:55 2008 -0600
13483 ColdFire: MCF5445x header files cleanup
13485 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13486 Signed-off by: John Rigby <jrigby@freescale.com>
13488 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
13489 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13490 Date: Mon Jan 14 16:59:42 2008 -0600
13492 ColdFire: MCF532x header files cleanup
13494 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13495 Signed-off by: John Rigby <jrigby@freescale.com>
13497 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
13498 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
13499 Date: Mon Jan 14 15:30:15 2008 -0600
13501 ColdFire: Add modules header files
13503 Add CF specific modules header files
13505 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13506 Signed-off-by: John Rigby <jrigby@freescale.com>
13508 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
13509 Author: Kim Phillips <kim.phillips@freescale.com>
13510 Date: Thu Jan 17 12:48:00 2008 -0600
13512 codingstyle cleanup for spi driver
13514 ..and rm unused CONFIG_FSL_SPI define
13516 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13518 commit d59feffb42c9f174116db7a82a311df98983dfce
13519 Author: Haiying Wang <Haiying.Wang@freescale.com>
13520 Date: Wed Jan 16 17:12:12 2008 -0500
13522 FSL: Fix common EEPROM_data structure definition
13524 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
13525 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
13528 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
13530 commit 6bee764bd6da510a4aad614880300c968bc7318d
13531 Author: Timur Tabi <timur@freescale.com>
13532 Date: Wed Jan 16 15:48:12 2008 -0600
13534 86xx: enable command-line editing
13536 Enable command-line editing for all MPC86xx boards.
13538 Signed-off-by: Timur Tabi <timur@freescale.com>
13540 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
13541 Author: Ben Warren <biggerbadderben@gmail.com>
13542 Date: Wed Jan 16 22:37:42 2008 -0500
13544 Implement hard SPI driver on MPC8349EMDS
13546 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
13547 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
13549 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13550 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13552 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
13553 Author: Ben Warren <biggerbadderben@gmail.com>
13554 Date: Wed Jan 16 22:37:35 2008 -0500
13556 Add support for a Freescale non-CPM SPI controller
13558 This patch adds support for the SPI controller found on Freescale PowerPC
13559 processors such as the MCP834x family. Additionally, a new config option,
13560 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
13562 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13563 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13565 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
13566 Author: Dave Liu <r63238@freescale.com>
13567 Date: Thu Jan 17 18:23:19 2008 +0800
13569 mpc83xx: Fix the fatal conflict of merge
13571 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
13572 will cause the mpc8315erdb board can't boot up.
13574 The patch fix that bug, and remove the duplicated #ifdef
13575 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
13576 MPC8313E processor.
13578 Signed-off-by: Dave Liu <daveliu@freescale.com>
13579 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13581 commit 3259eeaa4148125a81417477f62c05bd67f60587
13582 Author: Larry Johnson <lrj@acm.org>
13583 Date: Thu Jan 17 08:50:09 2008 -0500
13585 Merge Sequoia beautification into Korat code
13587 Signed-off-by: Larry Johnson <lrj@acm.org>
13589 commit e16925773211291b562e77187061e9dd1d757217
13590 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13591 Date: Thu Jan 17 07:45:05 2008 +0100
13593 net: add 'ethrotate' environment variable
13595 [PATCH] net: add 'ethrotate' environment variable
13597 This patch replaces the buildtime configuration option
13598 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
13599 configuration veriable. See README.
13601 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13602 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13604 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
13605 Author: Stefan Roese <sr@denx.de>
13606 Date: Thu Jan 17 14:29:04 2008 +0100
13608 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
13610 Signed-off-by: Stefan Roese <sr@denx.de>
13612 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
13613 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13614 Date: Thu Jan 17 18:07:32 2008 +0900
13616 sh: Remove CONFIG_COMMANDS from MS7720SE config file
13618 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13620 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
13621 Author: Niklaus Giger <niklaus.giger@netstal.com>
13622 Date: Wed Jan 16 18:39:20 2008 +0100
13624 ppc4xx: Netstal HCU4 board: added various fixes and POST
13626 - Moved some common code to netstal/common/nm_bsp.c.
13627 - sdram initialisation goes go netstal/common/fixed_sdram.c.
13628 - Added support for POST.
13629 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
13631 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
13633 commit 69b0634a4ee98c9791815600d43b99f626a952f3
13634 Author: Niklaus Giger <niklaus.giger@netstal.com>
13635 Date: Thu Jan 17 12:53:56 2008 +0100
13637 ppc4xx: netstal/common define routines used by all boards
13639 Added some routines used by all Netstal boards:
13640 - nm_bsp.c: - nm_show_print and
13641 - common_misc_init_r
13642 - set_params_for_sw_install. Very specific code to handle our SW
13643 installation procedure
13644 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
13645 to handle sdram initialization.
13646 - nm.h: Common header
13648 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
13650 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
13651 Author: Niklaus Giger <niklaus.giger@netstal.com>
13652 Date: Wed Jan 16 18:39:18 2008 +0100
13654 ppc4xx: Netstal HCU5 board: added various fixes and POST
13656 - Moved some common code to nestal/common/nm_bsp.c.
13657 - Added support for the vxWorks EDR.
13658 - Enable trace for Lauterbach, if present.
13659 - Added support for POST.
13660 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
13662 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
13664 commit 4371090e5da77edc7bf9f296364db4801639d9c4
13665 Author: Niklaus Giger <niklaus.giger@netstal.com>
13666 Date: Wed Jan 16 18:39:08 2008 +0100
13668 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
13671 - Reduced rom_size from 384 to 320 kB
13672 - Environment is now in flash
13676 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
13678 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
13679 Author: Niklaus Giger <niklaus.giger@netstal.com>
13680 Date: Wed Jan 16 18:37:50 2008 +0100
13682 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
13685 - Reduced rom_size from 384 to 320 kB
13686 - Environment is now in flash
13690 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
13692 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
13693 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13694 Date: Thu Jan 17 10:53:08 2008 +0100
13696 ppc4xx: Complete DU440 board support
13698 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13700 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
13701 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13702 Date: Thu Jan 17 10:52:30 2008 +0100
13704 ppc4xx: Add DU440 board support
13706 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13708 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
13709 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13710 Date: Thu Jan 17 15:53:52 2008 +0900
13712 sh: Update SuperH SCIF driver
13714 This patch fixed wrong SH7720 CPU macro and changed macro that
13715 calculated value of SCBRR register.
13717 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13719 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
13720 Author: Grzegorz Bernacki <gjb@semihalf.com>
13721 Date: Wed Jan 16 15:12:47 2008 +0100
13723 Set ips dividor to 1/4 of csb clock.
13725 Previous setting cause ips clock to be out of spec. This bug was found by John
13726 Rigby from Freescale.
13728 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
13730 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
13731 Author: Kumar Gala <galak@kernel.crashing.org>
13732 Date: Thu Jan 17 02:19:18 2008 -0600
13734 85xx: Get ride of old TLB setup code
13736 Now that all boards have been converted, remove old config code and the
13737 config option for the new style.
13739 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13741 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
13742 Author: Kumar Gala <galak@kernel.crashing.org>
13743 Date: Thu Jan 17 02:02:10 2008 -0600
13745 85xx: Convert TQM85xx to new TLB setup
13747 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13749 commit 74121b470c14f7eaf284ee838bffca6f9521069e
13750 Author: Kumar Gala <galak@kernel.crashing.org>
13751 Date: Thu Jan 17 01:56:32 2008 -0600
13753 85xx: Convert STXGP3 & STXSSA to new TLB setup
13755 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13757 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
13758 Author: Kumar Gala <galak@kernel.crashing.org>
13759 Date: Thu Jan 17 01:44:34 2008 -0600
13761 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
13763 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13765 commit 818218bac6a11591e2542c344d2330e0f4e1968b
13766 Author: Kumar Gala <galak@kernel.crashing.org>
13767 Date: Thu Jan 17 01:31:34 2008 -0600
13769 85xx: Convert PM854/PM856 to new TLB setup
13771 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13773 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
13774 Author: Kumar Gala <galak@kernel.crashing.org>
13775 Date: Thu Jan 17 01:25:33 2008 -0600
13777 85xx: Convert MPC8540EVAL to new TLB setup
13779 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13781 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
13782 Author: Kumar Gala <galak@kernel.crashing.org>
13783 Date: Thu Jan 17 01:12:22 2008 -0600
13785 85xx: Convert MPC8568 MDS to new TLB setup
13787 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13789 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
13790 Author: Kumar Gala <galak@kernel.crashing.org>
13791 Date: Thu Jan 17 01:01:09 2008 -0600
13793 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
13795 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13797 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
13798 Author: Kumar Gala <galak@kernel.crashing.org>
13799 Date: Thu Jan 17 00:52:29 2008 -0600
13801 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
13803 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13805 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
13806 Author: Kumar Gala <galak@kernel.crashing.org>
13807 Date: Thu Jan 17 00:32:17 2008 -0600
13809 85xx: Convert ATUM8548 to new TLB setup
13811 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13813 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
13814 Author: Kumar Gala <galak@kernel.crashing.org>
13815 Date: Wed Jan 16 23:11:57 2008 -0600
13817 85xx: Convert MPC8544 DS to new TLB setup
13819 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13821 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
13822 Author: Kumar Gala <galak@kernel.crashing.org>
13823 Date: Wed Jan 16 22:38:34 2008 -0600
13825 85xx: Reworked initial processor init
13827 Reworked the initial processor initialzation sequence:
13828 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
13829 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
13830 * Reworked initial asm code to do most of the core init before TLBs
13832 The main reasons for these changes are to allow handling of 36-bit phys
13833 addresses in the future and some of the issues that will exist when we
13836 There are a few caveats on what can be initialized via the LAW and TLB
13838 * TLB entry 14/15 can't be initialized via the TLB table
13839 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
13840 the code that is currently executing.
13842 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13844 commit 44a23cfd6360a68eaa41f945190618a55519eac3
13845 Author: Kumar Gala <galak@kernel.crashing.org>
13846 Date: Wed Jan 16 22:33:22 2008 -0600
13848 85xx: Introduce new tlb API
13850 Add a set of functions to manipulate TLB entries:
13851 * set_tlb() - write a tlb entry
13852 * invalidate_tlb() - invalidate a tlb array
13853 * disable_tlb() - disable a variable size tlb entry
13854 * init_tlbs() - setup initial tlbs based on static table
13856 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13858 commit be88b1699863c262818f3af7f60173b4d48df8fc
13859 Author: Stefan Roese <sr@denx.de>
13860 Date: Thu Jan 17 07:50:17 2008 +0100
13862 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
13864 Signed-off-by: Stefan Roese <sr@denx.de>
13866 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
13867 Author: Kumar Gala <galak@kernel.crashing.org>
13868 Date: Wed Jan 16 10:04:42 2008 -0600
13870 85xx: Use proper defines for PCI addresses
13872 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
13873 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
13874 be used for configuring the PCI ATMU.
13876 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13878 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
13879 Author: Kumar Gala <galak@kernel.crashing.org>
13880 Date: Wed Jan 16 09:22:29 2008 -0600
13882 85xx: Remove old style of LAW init
13884 All boards are now using the new fsl_law code so we can drop the old version.
13886 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13888 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
13889 Author: Kumar Gala <galak@kernel.crashing.org>
13890 Date: Wed Jan 16 09:15:29 2008 -0600
13892 85xx: convert remaining 85xx boards over to use new LAW init code
13894 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
13895 to use new LAW init code.
13897 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13899 commit 572b13afc42710f2957c382a710360429c0e099b
13900 Author: Kumar Gala <galak@kernel.crashing.org>
13901 Date: Wed Jan 16 09:11:53 2008 -0600
13903 85xx: convert STXGP3/STXSSA over to use new LAW init code
13905 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13907 commit 45f2166ac0233a9263058378f39612bd11f61196
13908 Author: Kumar Gala <galak@kernel.crashing.org>
13909 Date: Wed Jan 16 09:06:48 2008 -0600
13911 85xx: convert PM854/PM856 over to use new LAW init code
13913 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13915 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
13916 Author: Kumar Gala <galak@kernel.crashing.org>
13917 Date: Wed Jan 16 09:05:27 2008 -0600
13919 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
13921 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13923 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
13924 Author: Kumar Gala <galak@kernel.crashing.org>
13925 Date: Wed Jan 16 01:45:10 2008 -0600
13927 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
13929 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13931 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
13932 Author: Kumar Gala <galak@kernel.crashing.org>
13933 Date: Wed Jan 16 01:32:06 2008 -0600
13935 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
13937 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13939 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
13940 Author: Kumar Gala <galak@kernel.crashing.org>
13941 Date: Wed Jan 16 01:16:16 2008 -0600
13943 85xx: convert MPC8544 DS over to use new LAW init code
13945 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13947 commit 83d40dfd79fe868796275802f60116d84b9e4395
13948 Author: Kumar Gala <galak@kernel.crashing.org>
13949 Date: Wed Jan 16 01:13:58 2008 -0600
13951 85xx: Move LAW init code into C
13953 Move the initialization of the LAWs into C code and provide an API
13954 to allow modification of LAWs after init.
13956 Board code is responsible to provide a law_table and num_law_entries.
13958 We should be able to use the same code on 86xx as well.
13960 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13962 commit bed8ce838a609aaab136d43b25e6df2a520bc854
13963 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13964 Date: Sat Dec 22 15:03:12 2007 +0100
13966 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
13968 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13970 commit 0764c164fed6277d359cf132d55187ea34290114
13971 Author: Vlad Lungu <vlad@comsys.ro>
13972 Date: Wed Jan 16 19:27:51 2008 +0200
13974 MIPS:Target support for qemu -M mips
13976 With serial, NE2000, IDE support. Tested in big-endian mode.
13977 Memory size hard-coded to 128M for now, so don't play with
13980 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
13982 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
13983 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13984 Date: Fri Jan 11 00:01:37 2008 +0100
13986 Fix nfs command help to reflect that the serverip is optional
13988 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13989 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13991 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
13992 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13993 Date: Mon Dec 10 22:32:14 2007 +0100
13995 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
13997 and move is_valid_ether_addr board file
13999 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14000 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14002 commit c2f896b8fc4722e36915903e1942e138e68ce804
14003 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14004 Date: Wed Jan 16 16:13:31 2008 +0900
14006 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
14008 rx_status on the memory is basically in LE, but needs to be handled in CPU
14009 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
14012 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14013 Cc: Masami Komiya <mkomiya@sonare.it>
14014 Cc: Lucas Jin <lucasjin@gmail.com>
14015 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14017 commit 96a236746fe6a7b84802afb4ed31536696d34812
14018 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14019 Date: Wed Jan 16 16:12:26 2008 +0900
14021 drivers/net/rtl8139.c: Fix cache coherency issues
14023 Current driver is meant for cache coherent systems. This patch adds
14024 flush_cache() routines to support cache non-coherent systems.
14026 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14027 Cc: Masami Komiya <mkomiya@sonare.it>
14028 Cc: Lucas Jin <lucasjin@gmail.com>
14029 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14031 commit d1276c76c1e2b5035296689280ba1acb2c425104
14032 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14033 Date: Wed Jan 16 16:11:14 2008 +0900
14035 drivers/net/rtl8139.c: Fix tx timeout
14037 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
14038 does, the condition "(currticks() < to)" becomes invalid and immediately
14039 leads to tx timeout error. This patch introduces the fine-graded udely(10)
14040 loops to ease the impact of wrapping around.
14042 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14043 Cc: Masami Komiya <mkomiya@sonare.it>
14044 Cc: Lucas Jin <lucasjin@gmail.com>
14045 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14047 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
14048 Author: Dave Liu <r63238@freescale.com>
14049 Date: Fri Jan 11 18:45:28 2008 +0800
14051 TSEC: Add the support for RealTek RTL8211B PHY
14053 Add the support of RealTek RTL8211B PHY, the RTL8211B
14054 PHY only supports RGMII and MII mode.
14056 Signed-off-by: Dave Liu <daveliu@freescale.com>
14057 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14059 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
14060 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
14061 Date: Wed Jan 16 09:40:41 2008 +0100
14063 Remove annoying debug printout for PHY less boards.
14065 PHY less board prints out lots of "read wrong ...":
14066 read wrong value : mii_id 3,mii_reg 2, base e0102320
14067 read wrong value : mii_id 3,mii_reg 3, base e0102320
14068 UEC: PHY is Generic MII (ffffffff)
14069 read wrong value : mii_id 3,mii_reg 4, base e0102320
14070 read wrong value : mii_id 3,mii_reg 0, base e0102320
14071 read wrong value : mii_id 3,mii_reg 1, base e0102320
14072 read wrong value : mii_id 3,mii_reg 1, base e0102320
14073 read wrong value : mii_id 3,mii_reg 5, base e0102320
14074 read wrong value : mii_id 3,mii_reg 1, base e0102320
14075 read wrong value : mii_id 3,mii_reg 1, base e0102320
14076 read wrong value : mii_id 3,mii_reg 5, base e0102320
14077 FSL UEC0: Full Duplex
14078 FSL UEC0: Speed 100BT
14079 FSL UEC0: Link is up
14080 Using FSL UEC0 device
14082 Make this printout depend on UEC_VERBOSE_DEBUG and
14083 remove its definition in uec_phy.c
14085 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
14086 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14088 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
14089 Author: Kim Phillips <kim.phillips@freescale.com>
14090 Date: Tue Jan 15 14:11:00 2008 -0600
14092 net: reduce boot latency on QE UEC based boards
14094 actually polling for PHY autonegotiation to finish enables us to remove the
14095 5 second boot prompt latency present on QE based boards.
14097 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
14098 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
14099 code shamelessly stolen from tsec driver.
14101 also rm unused CONFIG_RMII_MODE code.
14103 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14104 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
14105 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14107 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
14108 Author: michael.firth@bt.com <michael.firth@bt.com>
14109 Date: Wed Jan 16 11:40:51 2008 +0000
14111 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
14113 The current TSEC driver limits MDIO access to the devices that have been configured as attached
14114 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
14116 Signed-off-by: Michael Firth <michael.firth@bt.com>
14117 Acked-by: Andy Fleming <afleming@freescale.com>
14118 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14120 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
14121 Author: Kim Phillips <kim.phillips@freescale.com>
14122 Date: Wed Jan 16 00:38:05 2008 -0600
14124 Add support for the MPC837xERDB
14126 MPC837xERDB board support includes:
14127 * DDR2 330MHz hardcoded (soldered on the board)
14128 * Local Bus NOR Flash
14129 * I2C, UART and RTC
14130 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
14131 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
14134 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
14135 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
14136 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14138 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
14139 Author: Kim Phillips <kim.phillips@freescale.com>
14140 Date: Wed Jan 16 12:06:16 2008 -0600
14142 mpc83xx: add support for more system clock performance controls
14144 System registers that are modified are the Arbiter Configuration
14145 Register (ACR), the System Priority Control Register (SPCR), and the
14146 System Clock Configuration Register (SCCR).
14148 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
14149 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
14150 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14152 commit 16c3cde050e2d243e62b37486f1558570787beb8
14153 Author: James Yang <james.yang@freescale.com>
14154 Date: Wed Jan 16 11:58:08 2008 -0600
14156 FSL: Generalize PIXIS reset command parsing.
14158 Before, the order of arguments to the pixis_reset
14159 command needed to be supplied in a hard-coded order.
14160 Generalize the command parsing to allow any order.
14162 Signed-off-by: James Yang <james.yang@freescale.com>
14163 Acked-by: Jon Loeliger <jdl@freescale.com>
14165 commit ad8f8687b78c3e917b173f038926695383c55555
14166 Author: Jon Loeliger <jdl@freescale.com>
14167 Date: Tue Jan 15 13:42:41 2008 -0600
14169 FSL: Convert board/freescale/common/Makefile to use CONFIG_
14171 Convert the board/freescale/common/Makefile to use
14172 CONFIG_* options to select which files to conditionally
14173 compile into the board/freescale/common library rather
14174 than conditionally compiling entire files.
14181 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
14183 Signed-off-by: Jon Loeliger <jdl@freescale.com>
14185 commit 7c2221eb230372a9e537c4f6636b147b0909325f
14186 Author: Roy Zang <tie-fei.zang@freescale.com>
14187 Date: Tue Jan 15 16:38:38 2008 +0800
14189 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
14191 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
14192 Remove unused ethernet CONFIG_ options.
14194 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
14195 Acked-by: Jon Loeliger <jdl@freescale.com>
14197 commit 711a7946277d2e29af481011e8635e9975c54e45
14198 Author: Kim Phillips <kim.phillips@freescale.com>
14199 Date: Tue Jan 15 14:05:14 2008 -0600
14201 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
14203 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
14205 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14207 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
14208 Author: Kim Phillips <kim.phillips@freescale.com>
14209 Date: Tue Jan 15 09:51:12 2008 -0600
14211 mpc83xx: clean up mpc8360emds.c warnings
14213 mpc8360emds.c: In function 'ft_board_setup':
14214 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
14215 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
14216 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
14217 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
14218 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
14219 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
14221 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14223 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
14224 Author: Kim Phillips <kim.phillips@freescale.com>
14225 Date: Mon Jan 14 16:14:46 2008 -0600
14227 mpc83xx: fix phy-connection-type fixup code
14229 use tree passed to us in local blob, not global fdt.
14231 Also use fdt_path_offset to convert to relative offset, since absolute
14232 reference is needed to check for rgmii-id mode string value.
14234 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14236 commit 2b4c952be7c4357a13e839d48df80853820c33eb
14237 Author: Kumar Gala <galak@kernel.crashing.org>
14238 Date: Mon Jan 14 09:01:40 2008 -0600
14240 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
14242 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14243 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14245 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
14246 Author: Poonam Aggrwal <b10812@freescale.com>
14247 Date: Mon Jan 14 09:41:14 2008 +0530
14249 Changes in uboot DDR configuration for MPC8313eRDB
14251 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
14252 DDR configuration in u-boot code. Some are related to performance, some
14253 affect stability and some correct few basic errors in the current
14256 The changes have been tested and found to give better memory latency
14257 figures on MPC8313eRDB.LMBench figures prove it.
14261 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
14262 (this may improve performance for application with many read
14263 or write to open pages).
14264 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
14265 001 (activating all the CS when only one is used may cause
14266 unwanted noise on the system)
14268 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
14270 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
14272 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
14273 comply with the 3 ODT clk requirements)
14274 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
14275 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
14277 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
14278 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
14280 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
14281 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
14283 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
14284 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
14286 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
14287 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
14288 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
14289 Cc: Josep P J <PJ.Joseph@freescale.com>
14290 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14292 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
14293 Author: Jerry Van Baren <gvb.uboot@gmail.com>
14294 Date: Sat Jan 12 13:24:14 2008 -0500
14296 Enable the isdram command on the MPC8360EMDS board
14298 The isdram command prints out decoded information the "serial presence
14299 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
14300 debugging memory configuration problems.
14302 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
14303 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14305 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
14306 Author: Dave Liu <r63238@freescale.com>
14307 Date: Fri Jan 11 18:48:24 2008 +0800
14309 mpc83xx: Add the support for MPC8315ERDB board
14312 - Boot from NOR Flash
14313 - DDR2 266MHz hardcoded configuration
14314 - Local bus NOR Flash R/W operation
14315 - I2C, UART, MII and RTC
14319 Signed-off-by: Dave Liu <daveliu@freescale.com>
14320 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14322 commit b05884efa614e4d8a9413158fc228e0dc02ab704
14323 Author: Dave Liu <r63238@freescale.com>
14324 Date: Fri Jan 11 18:46:50 2008 +0800
14326 mpc83xx: Add config of eTSEC emergency priority in SPCR
14328 The TSEC emergency priority definition of 831x/837x
14329 is different than the definition of 834x in SPCR register.
14331 Add the other config of TSEC emergency priority into
14334 Signed-off-by: Dave Liu <daveliu@freescale.com>
14335 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14337 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
14338 Author: Dave Liu <r63238@freescale.com>
14339 Date: Fri Jan 11 18:42:19 2008 +0800
14341 mpc83xx: Remove cache config from MPC8360ERDK.h
14343 The MPC8360ERDK board support patch is added before
14344 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
14345 so, miss clean up it.
14347 The patch clean up the miss cache config.
14349 Signed-off-by: Dave Liu <daveliu@freescale.com>
14350 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14352 commit cd9d23053d435c08fc8695017b5cb9003fcda786
14353 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
14354 Date: Mon Jan 14 23:09:32 2008 +0300
14356 nand: FSL UPM NAND driver
14358 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14360 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
14361 Author: Kyungmin Park <kmpark@infradead.org>
14362 Date: Tue Jan 15 08:59:44 2008 +0900
14364 OneNAND: Separate U-Boot dependent code from OneNAND
14366 OneNAND: Separate U-Boot dependent code from OneNAND
14368 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
14370 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
14371 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14372 Date: Wed Jan 16 10:33:46 2008 +0100
14374 ppc4xx: Sequoia coding style cleanup and beautification
14376 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14378 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
14379 Author: Larry Johnson <lrj@acm.org>
14380 Date: Tue Jan 15 14:35:58 2008 -0500
14382 ppc4xx: Refactor ECC POST for AMCC Denali core
14384 The ECC POST reported intermittent failures running after power-up on
14385 the Korat PPC440EPx board. Even when the test passed, the debugging
14386 output occasionally reported additional unexpected ECC errors.
14388 This refactoring has three main objectives: (1) minimize the code
14389 executed with ECC enabled during the tests, (2) add more checking of the
14390 results so any unexpected ECC errors would cause the test to fail, and
14391 (3) use synchronization (only) where required by the processor.
14393 Signed-off-by: Larry Johnson <lrj@acm.org>
14395 commit 2465665b73ac2f688af945b1ed510752afa816a4
14396 Author: David Saada <David.Saada@ecitele.com>
14397 Date: Tue Jan 15 10:40:24 2008 +0200
14399 QE UEC: Extend number of supported UECs to 4
14401 This patch extends the number of supported UECs to 4. Note that the
14402 problem of QE thread resources exhaustion is resolved by setting the
14403 correct number of QE threads according to Ethernet type (GBE or FE).
14405 Signed-off-by: David Saada <david.saada@ecitele.com>
14406 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14408 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
14409 Author: Wolfgang Denk <wd@denx.de>
14410 Date: Wed Jan 16 00:01:01 2008 +0100
14412 LWMON5: enable hush shell as command line parser
14414 Signed-off-by: Wolfgang Denk <wd@denx.de>
14416 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
14417 Author: Wolfgang Denk <wd@denx.de>
14418 Date: Tue Jan 15 17:22:28 2008 +0100
14420 ADS5121: disable watchdog; enable image timestamps
14422 Signed-off-by: Wolfgang Denk <wd@denx.de>
14424 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
14425 Author: Wolfgang Denk <wd@denx.de>
14426 Date: Tue Jan 15 17:21:28 2008 +0100
14428 TK885D: fixes for bigger flash sector sizes on new modules;
14429 adjust default environment;
14430 disable SCC ethernet (not used on this board).
14432 Signed-off-by: Wolfgang Denk <wd@denx.de>
14434 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
14435 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14436 Date: Tue Jan 15 17:48:13 2008 +0900
14438 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
14440 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14442 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
14443 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14444 Date: Tue Jan 15 23:25:25 2008 +0900
14446 sh: Add support SH7710/SH7712
14448 SH7710/SH7712 of SH3 CPU are supported.
14449 SH771X is called SH-Ether, and has the Ether controller in CPU.
14450 The driver of Ether is not included in this patch.
14452 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14454 commit 63a11be68306870e04d3851ed9fa41955cdf4894
14455 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14456 Date: Tue Jan 15 23:06:17 2008 +0900
14458 sh: Add support of map_physmem() and unmap_physmem() to SuperH
14460 This patch add the support of map_physmem() and unmap_physmem()
14461 used with Common Flash Interface(CFI) driver.
14463 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14465 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
14466 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14467 Date: Wed Jan 9 14:42:27 2008 +0900
14469 sh: Add maintainer of MS7720SE to the MAINTAINER file
14471 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14473 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
14474 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14475 Date: Wed Jan 9 14:39:58 2008 +0900
14477 sh: Fix board name in MS7720SE's config.mk
14479 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14481 commit c0a04d93734d768b39dbb72fb501b65614c8615d
14482 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14483 Date: Wed Jan 9 14:37:36 2008 +0900
14485 sh: Add MS7720SE to MAKEALL
14487 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14489 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
14490 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
14491 Date: Mon Dec 3 22:58:50 2007 +0900
14493 sh: Add support for MS7720RP02 board
14495 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
14496 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14497 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14499 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
14500 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
14501 Date: Wed Jan 9 14:30:02 2008 +0900
14503 sh: Add support for SH7720 in serial_sh driver.
14505 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
14506 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14507 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14509 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
14510 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
14511 Date: Mon Dec 3 22:58:45 2007 +0900
14513 sh: Add support SH3 and SH7720
14515 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
14516 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14517 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
14519 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
14520 Author: Stefan Roese <sr@denx.de>
14521 Date: Tue Jan 15 10:11:02 2008 +0100
14523 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
14525 Signed-off-by: Stefan Roese <sr@denx.de>
14527 commit 17bef68097ab3692500a36fb31115bff7910aa99
14528 Author: Niklaus Giger <niklausgiger@gmx.ch>
14529 Date: Mon Jan 14 14:04:42 2008 +0100
14531 ppc_4xx: Fix post spr.c for PPC405
14533 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
14534 for PPC440 and derivates processor.
14536 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
14538 commit 06c428bcd4413014b43236e77765022071424fa6
14539 Author: Dave Liu <r63238@freescale.com>
14540 Date: Mon Jan 14 11:12:01 2008 +0800
14542 QE: fix compile warning
14544 qe.c: In function 'qe_upload_firmware':
14545 qe.c:390: warning: pointer targets in passing argument 2
14546 uec.c: In function 'uec_initialize':
14547 uec.c:1236: warning: 'uec_info' may be used uninitialized
14549 Signed-off-by: Dave Liu <daveliu@freescale.com>
14551 commit a0dd99d51efa55fe023e19c97ead92683725eb11
14552 Author: Stefan Roese <sr@denx.de>
14553 Date: Mon Jan 14 10:05:05 2008 +0100
14555 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
14557 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
14558 to remove the USB PHY reset after powerup. The CPLD will keep the
14559 USB PHY in reset (active low) until the bit is set to 1 in
14560 board_early_init_f().
14562 Signed-off-by: Stefan Roese <sr@denx.de>
14564 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
14565 Author: Wolfgang Denk <wd@denx.de>
14566 Date: Sun Jan 13 23:26:45 2008 +0100
14568 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
14570 Signed-off-by: Wolfgang Denk <wd@denx.de>
14572 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
14573 Author: Wolfgang Denk <wd@denx.de>
14574 Date: Sun Jan 13 23:37:50 2008 +0100
14576 ADS5121: Fix typo in ads5121.c, adjust default environment
14578 Signed-off-by: Wolfgang Denk <wd@denx.de>
14580 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
14581 Author: John Rigby <jrigby@freescale.com>
14582 Date: Fri Aug 24 18:18:43 2007 -0600
14584 ADS5121: MAX slew rate for PATA pins
14586 Signed-off-by: John Rigby <jrigby@freescale.com>
14588 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
14589 Author: Wolfgang Denk <wd@denx.de>
14590 Date: Sun Jan 13 21:05:52 2008 +0100
14592 Fix Makefile dependency problem with parallel builds.
14594 Signed-off-by: Wolfgang Denk <wd@denx.de>
14596 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
14597 Author: Wolfgang Denk <wd@denx.de>
14598 Date: Sun Jan 13 19:51:39 2008 +0100
14600 MPC8544DS: fix board Makefile for silent build (with -s)
14602 Signed-off-by: Wolfgang Denk <wd@denx.de>
14604 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
14605 Author: Wolfgang Denk <wd@denx.de>
14606 Date: Sun Jan 13 16:44:08 2008 +0100
14608 PMC440 board: fix board Makefile for out-of-tree building
14610 Signed-off-by: Wolfgang Denk <wd@denx.de>
14612 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
14613 Author: Wolfgang Denk <wd@denx.de>
14614 Date: Sun Jan 13 16:07:44 2008 +0100
14616 Makalu: fix compile warning
14618 Signed-off-by: Wolfgang Denk <wd@denx.de>
14620 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
14621 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14622 Date: Sun Jan 13 12:36:12 2008 +0100
14624 cmd_nand : fix compiler warning.
14626 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14628 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
14629 Author: Michael Schwingen <rincewind@discworld.dascon.de>
14630 Date: Sat Jan 12 20:29:47 2008 +0100
14632 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
14634 Signed-off-by: Michael Schwingen <michael@schwingen.org>
14635 Acked-by: Stefan Roese <sr@denx.de>
14637 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
14638 Author: Wolfgang Denk <wd@denx.de>
14639 Date: Sun Jan 13 02:19:44 2008 +0100
14641 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
14643 Signed-off-by: Wolfgang Denk <wd@denx.de>
14645 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
14646 Author: Wolfgang Denk <wd@denx.de>
14647 Date: Sun Jan 13 02:19:13 2008 +0100
14649 MPC8xx FEC driver: fix compiler warning.
14651 Signed-off-by: Wolfgang Denk <wd@denx.de>
14653 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
14654 Author: Wolfgang Denk <wd@denx.de>
14655 Date: Sun Jan 13 00:59:21 2008 +0100
14657 Fix Makefile dependencies issues; allow silent build
14659 - get rid of "version" target whichdidn't really work
14660 - make autoconf.mk depend on version_autogenerated.h to make sure
14661 to rebuild files as needed
14662 - add XECHO macro to allow for silent build using "make -s"
14664 Signed-off-by: Wolfgang Denk <wd@denx.de>
14666 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
14667 Author: Wolfgang Denk <wd@denx.de>
14668 Date: Sun Jan 13 00:55:47 2008 +0100
14670 ADS5121e: fix compile warning
14672 Signed-off-by: Wolfgang Denk <wd@denx.de>
14674 commit f2b6f4610627fe3d607620e25082916a01538875
14675 Author: Wolfgang Denk <wd@denx.de>
14676 Date: Sun Jan 13 00:55:18 2008 +0100
14678 MUNICes: fix board Makefile for remote build directory
14680 Signed-off-by: Wolfgang Denk <wd@denx.de>
14682 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
14683 Author: Oliver Weber <almoeli@gmx.de>
14684 Date: Wed Jan 9 17:04:38 2008 +0100
14686 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
14688 Signed-off-by: Oliver Weber <almoeli@gmx.de>
14690 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
14691 Author: Andreas Engel <andreas.engel@ericsson.com>
14692 Date: Wed Jan 9 17:10:56 2008 +0100
14694 Make bootretry work when command line editing is enabled
14696 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
14697 This patch fixes the problem.
14699 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
14701 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
14702 Author: Larry Johnson <lrj@acm.org>
14703 Date: Fri Jan 11 23:26:18 2008 -0500
14705 Refactor code for "i2c sdram" command
14707 Signed-off-by: Larry Johnson <lrj@acm.org>
14709 commit 0df6b8446c4721b91ce311548114891130371083
14710 Author: Larry Johnson <lrj@acm.org>
14711 Date: Thu Jan 10 22:23:39 2008 -0500
14713 Fix "i2c sdram" command for DDR2 DIMMs
14715 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
14716 "i2c sdram" command. This patch provides correct alternative
14717 interpretations when DDR2 memory is detected.
14719 Signed-off-by: Larry Johnson <lrj@acm.org>
14721 commit 64134f011254123618798ff77c42ba196b2ec485
14722 Author: Wolfgang Denk <wd@denx.de>
14723 Date: Sat Jan 12 20:31:39 2008 +0100
14725 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
14727 With recent toolchain versions, some boards would not build because
14728 or errors like this one (here for ocotea board when building with
14730 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
14732 For many boards, the .bss section is big enough that it wraps around
14733 at the end of the address space (0xFFFFFFFF), so the problem will not
14734 be visible unless you use a 64 bit tool chain for development. On
14735 some boards however, changes to the code size (due to different
14736 optimizations) we bail out with section overlaps like above.
14738 The fix is to add the NOLOAD attribute to the .bss and .sbss
14739 sections, telling the linker that .bss does not consume any space in
14742 Signed-off-by: Wolfgang Denk <wd@denx.de>
14744 commit 3afac79ec27b91df185f090b31dad9620779f440
14745 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
14746 Date: Fri Jan 11 20:42:58 2008 -0600
14748 USB: Add Philips 1561 PCI-OHCI ids
14749 (needed for M5475EVB)
14751 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
14753 commit 5e8def6731cd7bec74bff42a16b139de04010353
14754 Author: Wolfgang Denk <wd@denx.de>
14755 Date: Sat Jan 12 15:51:34 2008 +0100
14757 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
14760 Signed-off-by: Heiko Schocher <hs@denx.de>
14761 Signed-off-by: Wolfgang Denk <wd@denx.de>
14763 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
14764 Author: Grzegorz Bernacki <gjb@semihalf.com>
14765 Date: Fri Jan 11 12:03:43 2008 +0100
14767 MPC512X: Cleanup bus clock names.
14769 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
14771 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
14772 Author: Grzegorz Bernacki <gjb@semihalf.com>
14773 Date: Tue Jan 8 17:16:59 2008 +0100
14775 MPC512X: Fixed typo in macro name.
14777 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
14779 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
14780 Author: Grzegorz Bernacki <gjb@semihalf.com>
14781 Date: Tue Jan 8 17:16:15 2008 +0100
14783 ads5121: Added support for FDT.
14785 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
14787 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
14788 Author: Wolfgang Denk <wd@denx.de>
14789 Date: Sat Jan 12 01:05:50 2008 +0100
14791 Coding Style cleanup; update CHANGELOG.
14793 Signed-off-by: Wolfgang Denk <wd@denx.de>
14795 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
14796 Author: Heiko Schocher <hs@denx.de>
14797 Date: Fri Jan 11 15:15:17 2008 +0100
14799 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
14801 Signed-off-by: Timur Tabi <timur@freescale.com>
14802 Signed-off-by: Heiko Schocher <hs@denx.de>
14804 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
14805 Author: Heiko Schocher <hs@denx.de>
14806 Date: Fri Jan 11 15:15:16 2008 +0100
14808 MUNICes: Set the right CFG_DEFAULT_MBAR value.
14810 Signed-off-by: Heiko Schocher <hs@denx.de>
14812 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
14813 Author: Heiko Schocher <hs@denx.de>
14814 Date: Fri Jan 11 15:15:15 2008 +0100
14816 added the config File for the MUNICes board.
14818 Signed-off-by: Heiko Schocher <hs@denx.de>
14820 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
14821 Author: Heiko Schocher <hs@denx.de>
14822 Date: Fri Jan 11 15:15:14 2008 +0100
14824 added basic support for the MUNICes board.
14826 Signed-off-by: Heiko Schocher <hs@denx.de>
14828 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
14829 Author: Wolfgang Denk <wd@denx.de>
14830 Date: Sat Jan 12 00:39:37 2008 +0100
14832 Update CHANGELOG and MAINTAINERS files.
14834 Signed-off-by: Wolfgang Denk <wd@denx.de>
14836 commit 5ba7390c3cb579172be66888a371707b47b5be4e
14837 Author: Anatolij Gustschin <agust@denx.de>
14838 Date: Fri Jan 11 02:15:02 2008 +0100
14840 Fix compilation problem in common/cmd_bmp.c
14842 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
14843 isn't defined. This patch fix this.
14845 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14847 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
14848 Author: Heiko Schocher <hs@denx.de>
14849 Date: Fri Jan 11 01:12:09 2008 +0100
14851 Fix defaultconfig for the mgcoge board.
14853 Signed-off-by: Heiko Schocher <hs@denx.de>
14855 commit ac9db066b26935f31bff15c98168b19faeb603f3
14856 Author: Heiko Schocher <hs@denx.de>
14857 Date: Fri Jan 11 01:12:08 2008 +0100
14859 Added support for the mgcoge board from keymile.
14861 Signed-off-by: Heiko Schocher <hs@denx.de>
14863 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
14864 Author: Heiko Schocher <hs@denx.de>
14865 Date: Fri Jan 11 01:12:07 2008 +0100
14867 Enable SMC microcode relocation patch for SMC1.
14869 Signed-off-by: Heiko Schocher <hs@denx.de>
14871 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
14872 Author: Heiko Schocher <hs@denx.de>
14873 Date: Fri Jan 11 01:12:06 2008 +0100
14875 Added support for the mgsuvd board from keymile.
14877 Signed-off-by: Heiko Schocher <hs@denx.de>
14879 commit bf05293973b348f6946c9df92cd3c65ece42d0be
14880 Author: James Yang <james.yang@freescale.com>
14881 Date: Thu Jan 10 16:02:07 2008 -0600
14883 Fix 64-bit vsprintf.
14885 There were some size and unsigned problems.
14886 Also add support for "ll" size modifier in format string like glibc
14888 Signed-off-by: James Yang <James.Yang@freescale.com>
14889 Acked-by: Jon Loeliger <jdl@freescale.com>
14891 commit 92fa37eac530860643afa26ae347af3d23d67309
14892 Author: Larry Johnson <lrj@acm.org>
14893 Date: Wed Jan 9 12:42:35 2008 -0500
14895 Remove superfluous preprocessor conditionals from LM73 driver
14897 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
14899 (2) Use conditional Makefile.o.
14901 Signed-off-by: Larry Johnson <lrj@acm.org>
14903 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
14904 Author: Guennadi Liakhovetski <lg@denx.de>
14905 Date: Thu Jan 10 17:59:07 2008 +0100
14907 Add support for the TK885D baseboard from TELE-DATA
14909 The TK885D board uses a TQM885D module from TQ, this port adds an
14910 own configuration file and adds a last_stage_init() method to
14911 configure the two PHYs, depending on the phy_auto_nego environment
14914 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14916 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
14917 Author: Kumar Gala <galak@kernel.crashing.org>
14918 Date: Thu Jan 10 02:22:05 2008 -0600
14920 Fix compiler warning
14922 main.c: In function 'readline_into_buffer':
14923 main.c:927: warning: unused variable 'p_buf'
14925 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14927 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
14928 Author: Anatolij Gustschin <agust@denx.de>
14929 Date: Fri Jan 11 14:30:01 2008 +0100
14931 Add Fujitsu CoralP/Lime video driver
14933 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14934 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
14936 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
14937 Author: Anatolij Gustschin <agust@denx.de>
14938 Date: Fri Jan 11 02:39:47 2008 +0100
14940 Fix video console newline and carriage return handling
14942 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
14943 are not displayed correctly. This is an attempt to fix
14944 this issue. Also add carriage return handling.
14946 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14947 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
14949 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
14950 Author: Stefan Roese <sr@denx.de>
14951 Date: Fri Jan 11 15:53:58 2008 +0100
14953 ppc4xx: Fix sdram init on Sequoia boards
14955 Clear possible errors in MCSR resulting from data-eye-search.
14956 If not done, then we could get an interrupt later on when
14957 exceptions are enabled.
14959 Signed-off-by: Stefan Roese <sr@denx.de>
14961 commit d610a60730b7464f6f659db49d264d89a7c71061
14962 Author: Anatolij Gustschin <agust@denx.de>
14963 Date: Fri Jan 11 15:31:09 2008 +0100
14965 ppc4xx: Rework Lime support for lwmon5
14967 Rework Lime support for lwmon5 using new video driver
14969 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14971 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
14972 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14973 Date: Fri Jan 11 14:55:16 2008 +0100
14975 ppc4xx: Update PMC440 config file
14977 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14979 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
14980 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14981 Date: Fri Jan 11 14:55:08 2008 +0100
14983 ppx4xx: Fix sdram init on PMC440 boards
14985 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14987 commit 061aad4d320dddce26247699dcf2875ee2ea1366
14988 Author: Dave Liu <r63238@freescale.com>
14989 Date: Thu Jan 10 23:09:33 2008 +0800
14991 mpc83xx: Fix the bug of 266MHz data rate DDR
14993 The DDR doesn't work on the 266MHz data rate,
14994 the patch fix the bug.
14996 Signed-off-by: Dave Liu <daveliu@freescale.com>
14997 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14999 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
15000 Author: Dave Liu <r63238@freescale.com>
15001 Date: Thu Jan 10 23:08:26 2008 +0800
15003 mpc83xx: Make the code more readable
15005 Format the code, make it more readable
15007 Signed-off-by: Dave Liu <daveliu@freescale.com>
15008 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15010 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
15011 Author: Dave Liu <r63238@freescale.com>
15012 Date: Thu Jan 10 23:07:23 2008 +0800
15014 mpc83xx: Reduce the latency of DDR
15016 Reduce the AL from 2 to 1 clock to improve the performance.
15018 Signed-off-by: Dave Liu <daveliu@freescale.com>
15019 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15021 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
15022 Author: Dave Liu <r63238@freescale.com>
15023 Date: Thu Jan 10 23:06:05 2008 +0800
15025 mpc83xx: Fix the wrong definition of MPC8315E
15027 According to the latest user manual of MPC8315E,
15028 1) The SVCOD of HRCWL is different than 837x
15029 2) The SCCR has changes
15031 Signed-off-by: Dave Liu <daveliu@freescale.com>
15032 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15034 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
15035 Author: Dave Liu <r63238@freescale.com>
15036 Date: Thu Jan 10 23:05:00 2008 +0800
15038 mpc83xx: Fix the typo in mpc83xx.h
15040 The SPCR about TSEC priority is wrong.
15042 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
15043 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
15044 Signed-off-by: Dave Liu <daveliu@freescale.com>
15045 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15047 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
15048 Author: Dave Liu <r63238@freescale.com>
15049 Date: Thu Jan 10 23:04:13 2008 +0800
15051 mpc83xx: Fix the typo in global data struct
15053 Fix the typo in global_data.h
15055 Signed-off-by: Dave Liu <daveliu@freescale.com>
15056 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15058 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
15059 Author: Dave Liu <r63238@freescale.com>
15060 Date: Thu Jan 10 23:03:03 2008 +0800
15062 mpc83xx: Remove cache config from config.h
15064 clean up the cache config from configs.h of board
15066 Signed-off-by: Dave Liu <daveliu@freescale.com>
15067 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15069 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
15070 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15071 Date: Wed Jan 9 20:57:47 2008 +0300
15073 mpc83xx: add support for the MPC8360E-RDK
15075 This is MPC8360E based board with:
15076 - 256MB fixed SDRAM;
15077 - 8MB Intel Strata NOR flash;
15078 - StMICRO 64MiB NAND flash;
15079 - two 10/100/1000 ethernet ports connected via Broadcom
15081 - two 10/100 ethernet ports connected via National
15083 - one PCI and one miniPCI slots;
15084 - four serial ports (two NS16550-compatible, two UCCs);
15085 - four USB ports working through MPC8360E "FHCI" USB controller;
15086 - Fujitsu MB86277 graphics controller;
15087 - Analog to Digital Converter/Touchscreen controller, AD7843
15090 Features not supported in this patch are:
15091 - StMICRO 64MiB NAND flash (patch sent);
15092 - MINT framebuffer initialization (patch is pending);
15093 - Fetching production information from the EEPROM via I2C;
15095 - Two slow UCCs used as RS-485 UARTs.
15097 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15098 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15100 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
15101 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15102 Date: Wed Jan 9 20:57:40 2008 +0300
15104 mpc83xx: add "fsl, qe" compatible fixups
15106 New device trees will use "fsl,qe" compatible properties.
15108 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15109 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15111 commit 977b57583a7c34010e566a09a679ec3c1836f996
15112 Author: Kim Phillips <kim.phillips@freescale.com>
15113 Date: Wed Jan 9 15:24:06 2008 -0600
15115 mpc83xx: add missing CONFIG_HAS_ETH0 defines
15117 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
15118 is defined; add the define to the missing board configs.
15120 Thanks to Emilian Medve for finding this.
15122 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15124 commit b830b7f1635984ba607219fcbd78597c28eeb529
15125 Author: Becky Bruce <bgill@freescale.com>
15126 Date: Thu Jan 10 14:00:28 2008 -0600
15128 86xx: Support 2GB DIMMs
15130 Configure the number of bits used to address the banks inside the SDRAM
15131 device. The default register value of 0 means 2 bits to address 4 banks.
15132 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
15134 Signed-off-by: Becky Bruce <bgill@freescale.com>
15136 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
15137 Author: Niklaus Giger <niklausgiger@gmx.ch>
15138 Date: Thu Jan 10 18:50:33 2008 +0100
15140 ppc4xx: Make Sequoia boot vxWorks
15143 TLB 0 a entry for the Machine Check interrupt
15144 TLB 1 a entry for the RAM
15145 TLB 2 a entry for the EBC
15146 TLB 3 a entry for the boot flash
15148 After changing the baudrate to 9600 I had no problems to boot the
15149 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
15152 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
15154 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
15155 Author: Larry Johnson <lrj@arlinx.com>
15156 Date: Wed Jan 9 23:10:27 2008 -0500
15158 ppc4xx: Fix dflush() to restore DVLIM register
15160 Signed-off-by: Larry Johnson <lrj@acm.org>
15162 commit 252f60b068d1f94190b5bcfda169db582387e15e
15163 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15164 Date: Thu Jan 10 03:52:44 2008 -0500
15166 Nios2: remove common/cmd_bdinfo.c unused variable.
15168 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15169 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
15171 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
15172 Author: Ben Warren <biggerbadderben@gmail.com>
15173 Date: Wed Jan 9 18:15:53 2008 -0500
15175 Fix Ethernet init() return codes
15177 Change return values of init() functions in all Ethernet drivers to conform
15183 All drivers going forward should return 0 on success. Current drivers that
15184 return 1 on success were left as-is to minimize changes.
15186 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15187 Acked-by: Stefan Roese <sr@denx.de>
15188 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15189 Acked-by: Kim Phillips <kim.phillips@freescale.com>
15190 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
15191 Acked-By: Timur Tabi <timur@freescale.com>
15193 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
15194 Author: Wolfgang Denk <wd@denx.de>
15195 Date: Thu Jan 10 00:55:14 2008 +0100
15197 Coding Style cleanup; update CHANGELOG
15199 Signed-off-by: Wolfgang Denk <wd@denx.de>
15201 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
15202 Author: Kim Phillips <kim.phillips@freescale.com>
15203 Date: Wed Jan 9 16:56:54 2008 -0600
15205 Add QE brg freq and correct qe bus freq fdt update code
15207 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15208 Signed-off-by: Andy Fleming <afleming@freescale.com>
15210 commit 890dfef06c2d169a3356359596890754dfb8ee1c
15211 Author: Andy Fleming <afleming@freescale.com>
15212 Date: Wed Jan 9 16:34:51 2008 -0600
15214 Remove cache config from ATUM8548 and sbc8548 configs
15216 These boards weren't updated by Kumar's config patch because they
15217 weren't in the tree, yet.
15219 Signed-off-by: Andy Fleming <afleming@freescale.com>
15221 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
15222 Author: Timur Tabi <timur@freescale.com>
15223 Date: Mon Jan 7 13:31:19 2008 -0600
15225 85xx: add ability to upload QE firmware
15227 Define the layout of a binary blob that contains a QE firmware and instructions
15228 on how to upload it. Add function qe_upload_firmware() to parse the blob and
15229 perform the actual upload. Add command-line command "qe fw" to take a firmware
15230 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
15231 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
15232 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
15234 Signed-off-by: Timur Tabi <timur@freescale.com>
15236 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
15237 Author: Kumar Gala <galak@kernel.crashing.org>
15238 Date: Tue Jan 8 01:22:21 2008 -0600
15240 85xx: Remove cache config from configs.h
15242 Either use the standard defines in asm/cache.h or grab the information
15243 at runtime from the L1CFG SPR.
15245 Also, minor cleanup in cache.h to make the code a bit more readable.
15247 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15249 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
15250 Author: robert lazarski <robertlazarski@gmail.com>
15251 Date: Fri Dec 21 10:39:27 2007 -0500
15253 mpc85xx: Add support for ATUM8548 (updated)
15255 Add support for Instituto Atlantico's ATUM8548 board
15257 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
15258 Signed-off-by: Andy Fleming <afleming@freescale.com>
15260 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
15261 Author: robert lazarski <robertlazarski@gmail.com>
15262 Date: Fri Dec 21 10:36:37 2007 -0500
15264 mpc85xx: Add support for ATUM8548 (updated)
15266 Add support for Instituto Atlantico's ATUM8548 board
15268 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
15270 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
15271 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
15272 Date: Thu Dec 13 06:45:14 2007 -0600
15274 mpc85xx: Add support for SBC8548 (updated)
15276 Add support for Wind River's SBC8548 reference board.
15278 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
15280 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
15281 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
15282 Date: Thu Dec 13 06:45:08 2007 -0600
15284 mpc85xx: Add support for SBC8548 (updated)
15286 Add support for Wind River's SBC8548 reference board.
15288 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
15289 Signed-off by: Andy Fleming <afleming@freescale.com>
15291 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
15292 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15293 Date: Mon Oct 22 19:58:19 2007 +0400
15295 MPC8568E-MDS: set up QE pario for UART1
15297 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
15298 be set up appropriately.
15300 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15302 commit ad162249cb371e9e38971676f09be791e5f3cf4a
15303 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
15304 Date: Mon Oct 22 18:12:46 2007 +0400
15306 MPC8568E-MDS: reset UCCs to use them reliably
15308 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
15311 p.s Similar code exists in the Linux kernel board file (for capability
15312 reasons with older U-Boots), but should be removed some day.
15314 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
15316 commit 2146cf56821c3364786ca94a7306008c5824b238
15317 Author: Kumar Gala <galak@kernel.crashing.org>
15318 Date: Wed Dec 19 01:18:15 2007 -0600
15320 Reworked FSL Book-E TLB macros to be more readable
15322 The old macros made it difficult to know what WIMGE and perm bits
15323 were set for a TLB entry. Actually use the bit masks for these items
15324 since they are only a single bit.
15326 Also moved the macros into mmu.h out of e500.h since they aren't specific
15329 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15331 commit 1d47273d46925929f8f2c1913cd96d7257aade88
15332 Author: Kumar Gala <galak@kernel.crashing.org>
15333 Date: Tue Dec 18 23:21:51 2007 -0600
15335 Use FSL Book-E MMU macros from Linux Kernel
15337 Grab the FSL Book-E MAS register macros from Linux. Also added
15338 defines for page sizes up to 4TB and removed SHAREN since it doesnt
15341 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15343 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
15344 Author: Andy Fleming <afleming@freescale.com>
15345 Date: Wed Jan 9 13:51:32 2008 -0600
15347 Fix my own merge stupidity
15349 Way back in August I merged Heiko's patch:
15350 566a494f592: [PCS440EP] upgrade the PCS440EP board
15352 with Jon's CONFIG_COMMANDS patches.
15354 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
15356 However, in the process, I left out some of Heiko's good changes.
15358 Now Heiko's and Jon's patches are properly merged in fat_register_device()
15360 Signed-off-by: Andy Fleming <afleming@freescale.com>
15362 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
15363 Author: James Yang <James.Yang@freescale.com>
15364 Date: Wed Jan 9 11:17:49 2008 -0600
15366 Expose parse_line() globally.
15368 Add new function readline_into_buffer() that allows the
15369 output of readline to be put into a pointer to char buffer.
15371 This refactoring allows other functions besides the
15372 main command loop to also use the same input mechanism.
15374 Signed-off-by: James Yang <James.Yang@freescale.com>
15375 Acked-by: Jon Loeliger <jdl@freescale.com>
15377 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
15378 Author: Guennadi Liakhovetski <lg@denx.de>
15379 Date: Wed Jan 9 01:15:25 2008 +0100
15381 trivial: fix consequences of a bad merge
15383 Fix what looks like a merge artifact.
15385 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15387 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
15388 Author: Zhang Wei <wei.zhang@freescale.com>
15389 Date: Thu Jan 3 10:51:15 2008 +0800
15391 Add Ctrl combo key support to usb keyboard driver.
15393 Ctrl combo key support is added, which is very useful to input Ctrl-C
15394 for interrupt current job.
15395 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
15396 key input when tstc() is called.
15398 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
15400 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
15401 Author: Marcel Ziswiler <marcel@ziswiler.com>
15402 Date: Sun Dec 30 03:30:56 2007 +0100
15404 fix various comments
15406 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
15408 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
15409 Author: Marcel Ziswiler <marcel@ziswiler.com>
15410 Date: Sun Dec 30 03:30:46 2007 +0100
15412 fix comments with new drivers organization
15414 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
15416 commit a9b410dc7d2a4721c408b13abfc037988150f145
15417 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15418 Date: Fri Dec 28 12:50:59 2007 +0900
15420 Remove the obsolete terse version of do_mii()
15422 We now have more useful version of do_mii() and everybody use it.
15423 Gerald Van Baren says:
15425 > When I originally wrote the mii command 6(!) years ago, I wrote a
15426 > verbose version that printed human readable decomposition of the flags,
15427 > etc., and a terse one that didn't print as much stuff and thus had a
15428 > smaller memory footprint.
15430 > It sounds like the terse version has withered and died, apparently
15431 > people are only using the verbose version (which is very understandable,
15434 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15435 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
15437 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
15438 Author: Mike Frysinger <vapier@gentoo.org>
15439 Date: Thu Dec 27 13:42:56 2007 -0500
15441 Do not reference sha1.c when building mkimage.
15443 remove sha1.o from mkimage linking since it isn't actually used.
15445 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
15447 commit b9173af73e524d37c812f210173cf83385c5171a
15448 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15449 Date: Thu Dec 27 15:39:54 2007 +0900
15451 common/cmd_mii.c: Add sanity argc check
15453 If type mii command without arguments, we suffer from uninitialized argv[]
15454 entries; for example we MIPS get stuck by TLB error.
15456 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15458 commit 500856eb1707ed17d9204baa61dd59948d3b2899
15459 Author: Rafal Jaworowski <raj@semihalf.com>
15460 Date: Wed Jan 9 19:39:36 2008 +0100
15462 API for external applications.
15464 This is an API for external (standalone) applications running on top of
15465 U-Boot, and is meant to be more extensible and robust than the existing
15466 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
15469 Included is the demo application using this new framework (api_examples).
15471 Please note this is still an experimental feature, and is turned off by
15474 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
15476 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
15477 Author: Jon Loeliger <jdl@freescale.com>
15478 Date: Wed Jan 9 12:14:55 2008 -0600
15480 86xx: Remove cache config from configs.h
15482 Just use the standard defines in asm/cache.h.
15484 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15486 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
15487 Author: Rafal Jaworowski <raj@semihalf.com>
15488 Date: Wed Jan 9 18:05:27 2008 +0100
15490 Globalize envmatch()
15492 The newly introduced API (routines related to env vars) will need to call
15495 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
15497 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
15498 Author: Jon Loeliger <jdl@freescale.com>
15499 Date: Fri Jan 4 12:07:27 2008 -0600
15501 Convert MPC8610HPCD to use libfdt.
15503 Assumes the presence of the aliases node in the DTS to
15504 locate the pci and serial nodes for fixups.
15506 Use consistent fdtaddr and fdtfile in environment variables.
15508 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15510 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
15511 Author: Jon Loeliger <jdl@freescale.com>
15512 Date: Fri Jan 4 11:58:23 2008 -0600
15514 8610: Fix lingering compile warnings.
15518 Signed-off-by: Jon Loeliger <jdl@freescale.com>
15520 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
15521 Author: Wolfgang Denk <wd@denx.de>
15522 Date: Wed Jan 9 15:14:46 2008 +0100
15524 Coding Style cleanup, update CHANGELOG
15526 Signed-off-by: Wolfgang Denk <wd@denx.de>
15528 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
15529 Author: Mike Frysinger <vapier@gentoo.org>
15530 Date: Tue Dec 18 04:29:55 2007 -0500
15532 fix easylogo on big endian dev systems
15534 didnt realize how out of shape easylogo actually was until i tried using it.
15535 this patch does byte swapping as need be on the input tga header since the tga
15536 is in little endian but the host could just as well be big endian. i didnt
15537 bother using bswap macros or such stuff from system headers as nothing in
15538 POSIX dictates byte swapping functionality.
15540 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
15542 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
15543 Author: Mike Frysinger <vapier@gentoo.org>
15544 Date: Tue Dec 18 03:23:25 2007 -0500
15548 - make the Makefile not suck
15549 - include proper headers for prototypes
15550 - fix obvious broken handling of strchr() when handling '.' in filenames
15552 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
15554 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
15555 Author: raptorbrino@aim.com <raptorbrino@aim.com>
15556 Date: Thu Dec 13 21:23:28 2007 -0500
15558 Fix build problems under Cygwin
15560 This patch allows u-boot to build without error in a cygwin
15561 environment. Cygwin does not define __u64 in it's
15562 include/asm/types.h file. The -idirafter flag in the u-boot
15563 build causes the inclusion of the cygwin types.h file as opposed
15564 to u-bot/include/asm/types.h file which does define __u64.
15565 Subsequently, sha1.c compile fails due to unknown symbol.
15567 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
15569 commit 43ef1c381f9195504a2488f5cb909227eb97d475
15570 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
15571 Date: Fri Nov 30 17:29:59 2007 +0100
15573 cmd_bmp: Add support for displaying gzip compressed bmps
15575 The existing code can show information about a gzip compressed BMP
15576 image, but can't actually display it.
15578 Therefore, move the decompression code out of bmp_info() and use it in
15579 bmp_display() as well in order to display a compressed BMP image.
15581 Also, clean things up a bit and fix a memory leak while we're at it.
15583 [hskinnemoen@atmel.com: a bit of refactoring]
15584 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
15586 commit d197ffd8172c6fdef38733424640a9a47295d6e9
15587 Author: Guennadi Liakhovetski <lg@denx.de>
15588 Date: Thu Nov 29 21:15:56 2007 +0100
15590 Fix and optimize MII operations on FEC (MPC8xx) controllers
15592 This patch fixes several issues at least on a MPC885 based system with two
15593 FEC interfaces used in MII mode.
15595 1. PHY discovery should first read PHY_PHYIDR2 register and only then
15596 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
15597 otherwise the values read are wrong. Also notice, that PHY discovery
15598 cannot work on MPC88x / MPC87x in setups with both FECs active at all
15599 in its present form, because for both interfaces the registers from FEC
15600 1 are used to communicate over MII.
15602 2. Remove code duplication for resetting the FEC by isolating it into a
15605 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
15607 4. Optimize mii_init() to only reset the FEC 1 controller once.
15609 5. Fix a typo in mii_init() using index i instead of j thus potentially
15610 leading to unpredictable results.
15612 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15614 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
15615 Author: Guennadi Liakhovetski <lg@denx.de>
15616 Date: Tue Nov 20 13:14:20 2007 +0100
15618 Fix endianness conversions in rtl8169 driver
15620 It is unclear on what platforms this driver has been tested, since
15621 noone up to now defines CONFIG_RTL8169 in the board configuration
15622 header. Now it has been fixed for a big-endian mpc8241 based
15623 linkstation platform. This patch presents the necessary endianness
15626 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15628 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
15629 Author: Zhang Wei <wei.zhang@freescale.com>
15630 Date: Thu Jan 3 10:51:15 2008 +0800
15632 Add Ctrl combo key support to usb keyboard driver.
15634 Ctrl combo key support is added, which is very useful to input Ctrl-C
15635 for interrupt current job.
15636 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
15637 key input when tstc() is called.
15639 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
15640 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
15642 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
15643 Author: Wolfgang Denk <wd@denx.de>
15644 Date: Wed Jan 9 13:43:38 2008 +0100
15646 Coding Style clenaup; update CHANGELOG
15648 Signed-off-by: Wolfgang Denk <wd@denx.de>
15650 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
15651 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15652 Date: Thu Dec 27 17:13:11 2007 +0100
15654 Remove bit swapping in Xilinx Spartan bitfile loading
15656 This patch removes the unnecessary bit swapping when
15657 booting .bit files with the 'fpga loadb' command.
15659 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15661 commit 437fc7327f0611f82937858f2d80e4cd61b40984
15662 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15663 Date: Thu Dec 27 17:13:05 2007 +0100
15665 Fix MSB check in Xilinx Spartan slave serial mode
15667 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15669 commit 3bff4ffa33729a42645e328a21e8d16488872958
15670 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15671 Date: Thu Dec 27 17:12:56 2007 +0100
15673 Add new Xilinx Spartan FPGA types
15675 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15677 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
15678 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15679 Date: Thu Dec 27 17:12:43 2007 +0100
15681 Add pre and post configuration callbacks for Spartan FPGAs
15683 This patch adds a post configuration callback for Spartan2/3 FPGAs.
15684 pre and post configuration callback are now optional and
15685 not called when the function pointer is set to NULL.
15687 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15689 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
15690 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15691 Date: Thu Dec 27 17:12:34 2007 +0100
15693 Improve configuration of FPGA subsystem
15695 This patch removes the FPGA subsystem configuration through
15696 the CONFIG_FPGA bitmask configuration option.
15698 See README for the new options:
15701 CONFIG_FPGA_<vendor>,
15702 CONFIG_FPGA_<family>
15704 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15706 commit 95c6bc7d4a3588b452baca610f8c795a83630477
15707 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15708 Date: Thu Dec 27 16:55:17 2007 +0100
15710 Add Epson RX8025 RTC support
15712 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15714 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
15715 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15716 Date: Thu Dec 27 16:57:23 2007 +0100
15718 serial: Make default_serial_console() a weak function
15720 With this patch it is possible to reimplement default_serial_console()
15721 in board specific code. This will be done in the upcomming PMC440
15722 U-Boot port. This also allows the lwmon board maintainer to
15723 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
15725 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15727 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
15728 Author: Harald Welte <laforge@openmoko.org>
15729 Date: Wed Dec 19 14:14:47 2007 +0100
15731 add 'terminal program' functionality
15733 This patch adds a 'cu' like serial terminal command to u-boot
15734 using which you can access other serial ports from the system console.
15736 OpenMoko uses this in their Neo1973 phones to get access to the GSM
15737 Modem and GPS chip from the bootloader.
15739 Signed-off-by: Harald Welte <laforge@openmoko.org>
15741 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
15742 Author: Harald Welte <laforge@openmoko.org>
15743 Date: Wed Dec 19 14:12:53 2007 +0100
15745 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
15746 that used to exist with the legacy NAND code
15748 Signed-off-by: Harald Welte <laforge@openmoko.org>
15750 commit f540c42d9564854b19ce9bbb70affe172529fe70
15751 Author: Harald Welte <laforge@openmoko.org>
15752 Date: Wed Dec 19 14:09:58 2007 +0100
15754 Fix building with CRAMFS but not JFFS2 support
15756 Signed-off-by: Harald Welte <laforge@openmoko.org>
15758 commit 23d0baf967fecdaf1804f045f6339337c5607eec
15759 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15760 Date: Sat Dec 22 15:52:58 2007 +0100
15762 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
15764 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15765 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15767 commit 23776ff292966a85d811126933830bed48211826
15768 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15769 Date: Tue Dec 11 10:53:12 2007 +0100
15771 ARM: support board-specific ethernet PHY init
15773 Add until the new phylib will be arrived
15775 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15777 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
15778 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15779 Date: Sat Dec 8 16:34:08 2007 +0100
15781 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
15783 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15785 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
15786 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15787 Date: Sun Dec 9 11:01:10 2007 +0100
15789 Add missing file in gitignore and comments
15791 based on Linux source tree's .gitignore files
15793 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15795 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
15796 Author: Wolfgang Denk <wd@denx.de>
15797 Date: Wed Jan 9 11:36:21 2008 +0100
15799 Coding Style cleanup, update CHANGELOG
15801 Signed-off-by: Wolfgang Denk <wd@denx.de>
15803 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
15804 Author: Stefan Roese <sr@denx.de>
15805 Date: Wed Jan 9 10:38:58 2008 +0100
15807 POST: Execute SPR test after relocation
15809 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
15810 self modifying code and this doesn't work with stack in d-cache, since
15811 I can't move the code from d-cache to i-cache. We move the SPR test to
15812 be executed a little later, after relocation. Then stack is located in
15813 SDRAM and this self-modifying code is no problem anymore.
15815 Signed-off-by: Stefan Roese <sr@denx.de>
15817 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
15818 Author: Stefan Roese <sr@denx.de>
15819 Date: Wed Jan 9 10:28:20 2008 +0100
15821 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
15823 This patch configures the LWMON5 port to use d-cache as init-ram and
15824 the unused GPT0_COMP6 as POST WORD storage.
15826 Signed-off-by: Stefan Roese <sr@denx.de>
15828 commit 1754f50b710194f886b6f2831803d8960171a14d
15829 Author: Stefan Roese <sr@denx.de>
15830 Date: Wed Jan 9 10:25:46 2008 +0100
15832 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
15834 The privious 4xx POST implementation only supported storing the POST
15835 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
15836 we need to store the POST WORD in some other non volatile location.
15837 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
15840 Signed-off-by: Stefan Roese <sr@denx.de>
15842 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
15843 Author: Stefan Roese <sr@denx.de>
15844 Date: Wed Jan 9 10:23:16 2008 +0100
15846 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
15848 This patch adds support for locking the init-ram/stack in d-cache,
15849 so that other regions may use d-cache as well
15851 Note, that this current implementation locks exactly 4k of d-cache,
15852 so please make sure that you don't define a bigger init-ram area. Take
15853 a look at the lwmon5 440EPx implementation as a reference.
15855 Signed-off-by: Stefan Roese <sr@denx.de>
15857 commit 0ddb89601a8d29e808db450366752ffdc6267c53
15858 Author: Wolfgang Denk <wd@denx.de>
15859 Date: Wed Jan 9 10:16:33 2008 +0100
15861 Fix memset bug in ext2fs_read_file()
15863 ext2fs_read_file() had the function arguments swapped.
15865 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
15867 Signed-off-by: Wolfgang Denk <wd@denx.de>
15869 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
15870 Author: Markus Klotzbücher <mk@denx.de>
15871 Date: Tue Jan 5 08:17:15 1988 +0100
15873 Fix problems with usb storage devices on MPC5200 /TQM5200
15875 The MPC5200 OHCI controller operates in big endian, so
15876 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
15878 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
15880 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
15881 Author: Wolfgang Denk <wd@denx.de>
15882 Date: Tue Jan 8 22:58:27 2008 +0100
15884 Fix compile problem with new env code.
15886 Signed-off-by: Wolfgang Denk <wd@denx.de>
15888 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
15889 Author: Markus Klotzbücher <mk@denx.de>
15890 Date: Tue Nov 27 10:23:20 2007 +0100
15892 tools: fix fw_printenv tool to compile again
15894 This patch updates the fw_printenv/fw_setenv userspace tool to include
15895 the correct MTD header in order to compile against current kernel
15896 headers. Backward compatibility is preserved by introducing an option
15897 MTD_VERSION which can be set to "old" for compilation using the old MTD
15898 headers. Along with this a number of warnings are fixed.
15900 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
15902 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
15903 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15904 Date: Tue Jan 8 15:40:09 2008 +0100
15906 ppc4xx: assign PCI interrupts on seuqoia boards
15908 Some operating systems rely on assigned PCI interrupts.
15910 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15912 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
15913 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15914 Date: Tue Jan 8 15:50:49 2008 +0100
15916 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
15918 This patch allows the use of 4xx interrupt vector number defines
15919 in board specific code outside cpu/ppc4xx.
15921 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15923 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
15924 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15925 Date: Tue Jan 8 15:39:01 2008 +0100
15927 ppc4xx: Fix UIC2 vector number base
15929 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15931 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
15932 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15933 Date: Tue Jan 8 12:49:58 2008 +0100
15935 ppc4xx: Update PLB/PCI divider for PMC440 board
15937 This patch updates the PLB/PCI divider when running at
15938 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
15940 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15942 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
15943 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15944 Date: Tue Jan 8 11:13:09 2008 +0100
15946 ppc4xx: Disable error message when no NAND chip is installed on PMC440
15948 Add CFG_NAND_QUIET_TEST option to disable error message when
15949 no NAND chip is installed on PMC440 boards.
15951 Disable a couple of config defines that are only used for NAND_U_BOOT.
15953 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15955 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
15956 Author: Wolfgang Denk <wd@denx.de>
15957 Date: Tue Jan 8 22:58:27 2008 +0100
15959 Fix compile problem with new env code.
15961 Signed-off-by: Wolfgang Denk <wd@denx.de>
15963 commit 6de66b35426312a21174a9bf0576a094e2904bea
15964 Author: Markus Klotzbücher <mk@denx.de>
15965 Date: Tue Nov 27 10:23:20 2007 +0100
15967 tools: fix fw_printenv tool to compile again
15969 This patch updates the fw_printenv/fw_setenv userspace tool to include
15970 the correct MTD header in order to compile against current kernel
15971 headers. Backward compatibility is preserved by introducing an option
15972 MTD_VERSION which can be set to "old" for compilation using the old MTD
15973 headers. Along with this a number of warnings are fixed.
15975 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
15977 commit ad3006fe7e84667021753b74247b0bafd97ba35f
15978 Author: Gerald Van Baren <vanbaren@cideas.com>
15979 Date: Mon Jan 7 23:47:32 2008 -0500
15981 LIBFDT: use memmove() instead of memcpy()
15983 This is partial patch from the DTC/libfdt
15984 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
15985 Author: David Gibson <david@gibson.dropbear.id.au>
15986 Date: Wed Nov 21 11:56:14 2007 +1100
15988 The patch also fixes one genuine bug caught by valgrind -
15989 _packblocks() in fdt_rw.c was using memcpy() where it should have been
15992 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
15994 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
15995 Author: David Gibson <david@gibson.dropbear.id.au>
15996 Date: Mon Dec 17 14:42:07 2007 +1100
15998 libfdt: Add more documentation (patch the seventh)
16000 This patch adds more documenting comments to libfdt.h. Specifically,
16001 these document the read/write functions (not including fdt_open_into()
16002 and fdt_pack(), for now).
16004 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16006 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
16007 Author: David Gibson <david@gibson.dropbear.id.au>
16008 Date: Mon Dec 17 14:41:52 2007 +1100
16010 libfdt: Add more documentation (patch the sixth)
16012 This patch adds some more documenting comments to libfdt.h.
16013 Specifically this documents all the write-in-place functions.
16015 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16017 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
16018 Author: Gerald Van Baren <vanbaren@cideas.com>
16019 Date: Sat Dec 29 22:45:27 2007 -0500
16021 Fine grained per property /chosen updating.
16023 Implement a suggestion by Scott Wood to make the /chosen handling fine
16024 grained. Don't overwrite pre-existing properties on a per-property basis,
16025 so if /chosen exists but a necessary /chosen/property doesn't, it gets
16026 created. If a /chosen property exists, it is NOT overwritten unless the
16027 "force" flag is true.
16029 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
16031 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
16032 Author: Gerald Van Baren <vanbaren@cideas.com>
16033 Date: Sat Jan 5 15:33:29 2008 -0500
16035 Improve the FDT help message.
16037 Add a note that "fdt copy" makes the new address active.
16038 Remove most of the extra hints at the end of the fdt help.
16040 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
16042 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
16043 Author: Gerald Van Baren <vanbaren@cideas.com>
16044 Date: Sat Jan 5 14:52:04 2008 -0500
16046 Support setting FDT properties with optional values.
16048 Fix a bug found and documented by Bartlomiej Sieka where the optional
16049 value on "fdt set <path> <prop> [<val>]" wasn't optional.
16051 => fdt mknode / testnode
16052 => fdt print /testnode
16055 => fdt set /testnode testprop
16056 => fdt print /testnode
16061 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
16063 commit 22fb2246df91bfc840d87f0c5910818bad55577a
16064 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16065 Date: Fri Dec 28 11:56:30 2007 +0100
16067 Add fdt_find_and_setprop() to fdt_support.h
16069 fdt_find_and_setprop() is used by several 4xx boards and it's
16070 missing in the appropriate header. This patch eliminates a
16071 warning when building U-Boot for such boards.
16073 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16074 Acked-by: Stefan Roese <sr@denx.de>
16076 commit 802b769bac17b0560d3535a42c502469ee190cd1
16077 Author: Stefan Roese <sr@denx.de>
16078 Date: Tue Jan 8 18:39:30 2008 +0100
16080 ppc4xx: Return 0 on success in 4xx ethernet driver
16082 Signed-off-by: Stefan Roese <sr@denx.de>
16084 commit 6775c68683a53c7abc778774641aac6f833a2cbf
16085 Author: Kim Phillips <kim.phillips@freescale.com>
16086 Date: Tue Jan 8 09:59:49 2008 -0600
16088 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
16090 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16092 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
16093 Author: Kim Phillips <kim.phillips@freescale.com>
16094 Date: Thu Dec 20 16:28:34 2007 -0600
16096 mpc83xx: rm remaining FLAT_TREE code
16098 ..in board pci.c files
16100 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16102 commit b3458d2cd55d01732e30a76d898afd99e871cd67
16103 Author: Kim Phillips <kim.phillips@freescale.com>
16104 Date: Thu Dec 20 15:57:28 2007 -0600
16106 mpc83xx: remove FLAT_TREE code
16108 need to rm it from pci code, too!
16110 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16112 commit 5b8bc606c61456566af6912f818a153b6b06f242
16113 Author: Kim Phillips <kim.phillips@freescale.com>
16114 Date: Thu Dec 20 14:09:22 2007 -0600
16116 mpc83xx: convert to using do_fixup_*()
16118 convert to using simpler mpc85xx style fdt update code; streamline by
16119 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
16120 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
16121 converted over to using libfdt).
16123 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16125 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
16126 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
16127 Date: Thu Dec 20 12:58:51 2007 -0500
16129 sbc8349: enable libfdt by default on WRS SBC8349 board.
16131 Make libfdt the default for the WRS SBC8349 board.
16132 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
16133 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
16135 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
16137 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
16138 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
16139 Date: Thu Dec 20 12:58:16 2007 -0500
16141 sbc8349: migrate board to libfdt
16143 This adds libfdt support code for the Wind River sbc8349 board.
16145 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
16146 the other Freescale 83xx boards.
16148 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
16150 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
16151 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
16152 Date: Thu Dec 20 12:56:19 2007 -0500
16154 sbc8349: Remove board specific ECC code
16156 ECC code is now shared for all 83xx boards, so remove board specific one.
16157 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
16159 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
16161 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
16162 Author: Kim Phillips <kim.phillips@freescale.com>
16163 Date: Thu Dec 20 01:30:48 2007 -0600
16165 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
16167 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
16169 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16171 commit ccf21c311e68d48399eff1e72936052885f6e3f7
16172 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
16173 Date: Thu Dec 6 16:43:40 2007 +0100
16175 Add support CONFIG_UEC_ETH3 in MPC83xx
16177 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
16179 commit e6af9932d31171e35db880e7b2f29f903b1b7660
16180 Author: Kumar Gala <galak@kernel.crashing.org>
16181 Date: Mon Nov 26 11:00:54 2007 -0600
16183 Remove CONFIG options related to OF that we dont use
16185 The MPC8360E MDS config defined:
16187 CONFIG_OF_HAS_UBOOT_ENV
16189 Which we don't use or ever needed. This seems like copy-paste feature creep.
16191 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16193 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
16194 Author: Kim Phillips <kim.phillips@freescale.com>
16195 Date: Mon Dec 10 14:16:22 2007 -0600
16197 mpc83xx: supress compiler warning
16199 mpc8360emds.c: In function ‘ft_board_setup’:
16200 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
16201 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
16203 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16205 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
16206 Author: Kim Phillips <kim.phillips@freescale.com>
16207 Date: Tue Nov 27 14:17:29 2007 -0600
16209 mpc83xx: fix remaining fdt_find_node_by_path references
16211 rename to fdt_path_offset
16213 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16215 commit 921d4b19ad1be704df58725485d9292dc0414adf
16216 Author: Kim Phillips <kim.phillips@freescale.com>
16217 Date: Mon Nov 19 12:30:09 2007 -0600
16219 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
16221 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
16222 This change guarantees that the environment will be located on the
16223 first flash sector after the U-Boot image.
16225 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16227 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
16228 Author: Kim Phillips <kim.phillips@freescale.com>
16229 Date: Fri Nov 9 14:28:08 2007 -0600
16231 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
16233 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
16234 properties in the device tree so the PHY gets configured for internal delay on
16235 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
16237 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16239 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
16240 Author: Dave Liu <r63238@freescale.com>
16241 Date: Tue Sep 18 12:41:15 2007 +0800
16243 mpc83xx: update the CREDITS and MAINTAINERS
16245 update the CREDITS and MAINTAINERS.
16247 Signed-off-by: Dave Liu <daveliu@freescale.com>
16249 commit b21add4b42af7b767448251b599b91066a160e0d
16250 Author: Dave Liu <r63238@freescale.com>
16251 Date: Tue Sep 18 12:40:21 2007 +0800
16253 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
16255 Add the MAINTAINER and MAKEALL entries for mpc837xemds
16257 Signed-off-by: Dave Liu <daveliu@freescale.com>
16259 commit f8900ce9094c462355eb792eea264ff16ac8fd16
16260 Author: Dave Liu <r63238@freescale.com>
16261 Date: Tue Sep 18 12:38:53 2007 +0800
16263 mpc83xx: Add the MPC837xEMDS board readme
16265 Add the README.mpc837xemds to /doc
16267 Signed-off-by: Dave Liu <daveliu@freescale.com>
16269 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
16270 Author: Dave Liu <r63238@freescale.com>
16271 Date: Tue Sep 18 12:37:57 2007 +0800
16273 mpc83xx: Add the support of MPC837xEMDS board
16275 The MPC837xEMDS board support:
16276 * DDR2 400MHz hardcoded and SPD init
16277 * Local bus NOR Flash
16278 * I2C, UART, MII and RTC
16282 Signed-off-by: Dave Liu <daveliu@freescale.com>
16284 commit 555da61702771fe0f76f3de23b4e7590f3704161
16285 Author: Dave Liu <r63238@freescale.com>
16286 Date: Tue Sep 18 12:36:58 2007 +0800
16288 mpc83xx: Add the support of MPC8315E SoC
16290 The MPC8315E SoC including e300c3 core and new IP blocks,
16291 such as TDM, PCI Express and SATA controller.
16293 Signed-off-by: Dave Liu <daveliu@freescale.com>
16295 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
16296 Author: Dave Liu <r63238@freescale.com>
16297 Date: Tue Sep 18 12:36:11 2007 +0800
16299 mpc83xx: Add the support of MPC837x SoC
16301 The MPC837x SoC including e300c4 core and new IP blocks,
16302 such as SDHC, PCI Express and SATA controller.
16304 Signed-off-by: Dave Liu <daveliu@freescale.com>
16306 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
16307 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
16308 Date: Wed Nov 14 18:54:53 2007 +0300
16310 MPC8360E-MDS: configure and enable second UART
16312 Despite user manual, BCSR9.7 is negated (high) on HRST, so
16313 UART2 is disabled. Fix that and configure QE pins properly.
16315 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
16317 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
16318 Author: Timur Tabi <timur@freescale.com>
16319 Date: Mon Nov 5 09:34:06 2007 -0600
16321 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
16323 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
16324 currently-defined 83xx boards. This change guarantees that the environment
16325 will be located on the first flash sector after the U-Boot image.
16327 Signed-off-by: Timur Tabi <timur@freescale.com>
16328 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16330 commit e05329516a13616b53240cd85b739217c2bf87f1
16331 Author: Larry Johnson <lrj@acm.org>
16332 Date: Fri Jan 4 13:27:02 2008 -0500
16334 ppc4xx: Remove weak binding from common Denali data-eye search code
16336 Now that there are no board-specific versions of
16337 "denali_core_search_data_eye()", the weak binding on the common version
16340 Signed-off-by: Larry Johnson <lrj@acm.org>
16342 commit 5ba576c01602fd328800a427964c36a0a05c5dce
16343 Author: Stefan Roese <sr@denx.de>
16344 Date: Sat Jan 5 09:13:46 2008 +0100
16346 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
16348 Signed-off-by: Stefan Roese <sr@denx.de>
16350 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
16351 Author: Stefan Roese <sr@denx.de>
16352 Date: Sat Jan 5 09:12:41 2008 +0100
16354 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
16356 On Katmai the complete auto-calibration somehow doesn't seem to
16357 produce the best results, meaning optimal values for RQFD/RFFD.
16358 This was discovered by GDA using a high bandwidth scope,
16359 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
16360 so now on Katmai "only" RFFD is auto-calibrated.
16362 This patch also adds RDCC calibration as mentioned on page 7 of
16363 the AMCC PowerPC440SP/SPe DDR2 application note:
16364 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
16366 Signed-off-by: Stefan Roese <sr@denx.de>
16368 commit 49db47b8ae6afff2b898be312948ff501357dc80
16369 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16370 Date: Wed Jan 2 16:48:42 2008 +0100
16372 ppc4xx: Remove sdram.h from PMC440 board
16374 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16376 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
16377 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16378 Date: Wed Jan 2 16:48:34 2008 +0100
16380 ppc4xx: use common denali core defines and data eye search code for PMC440
16382 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16384 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
16385 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16386 Date: Wed Jan 2 12:05:14 2008 +0100
16388 ppc4xx: More cleanup for esd's LCD code
16390 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16392 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
16393 Author: Stefan Roese <sr@denx.de>
16394 Date: Fri Jan 4 12:00:01 2008 +0100
16396 ppc4xx: Fix Sequoia NAND booting target
16398 The Sequoia NAND booting target now uses the recently extracted
16399 cpu/ppc4xx/denali_data_eye.c file too.
16401 Signed-off-by: Stefan Roese <sr@denx.de>
16403 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
16404 Author: Lawrence R. Johnson <lrj@acm.org>
16405 Date: Thu Jan 3 15:02:02 2008 -0500
16407 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
16409 Signed-off-by: Larry Johnson <lrj@acm.org>
16411 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
16412 Author: Lawrence R. Johnson <lrj@acm.org>
16413 Date: Fri Jan 4 02:11:56 2008 -0500
16415 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
16417 Note: this patch changes the configuration of some GPIO registers:
16419 Register Old Value New Value
16420 --------------- ---------- ----------
16421 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
16422 DCR GPIO0_TSRH 0x55005000 0x00000000
16423 DCR GPIO1_TCR 0xC2000000 0xE2000000
16424 DCR GPIO1_TSRL 0x0C000000 0x00200000
16425 DCR GPIO1_ISR2L 0x00050000 0x00110000
16427 Signed-off-by: Larry Johnson <lrj@acm.org>
16429 commit 5ab884b254ca2e707ab50545cd705f30108cf491
16430 Author: Lawrence R. Johnson <lrj@acm.org>
16431 Date: Thu Jan 3 18:54:00 2008 -0500
16433 ppc4xx: Add functionality to GPIO support
16435 This patch makes two additions to GPIO support:
16437 First, it adds function gpio_read_in_bit() to read the a bit from the
16438 GPIO Input Register (GPIOx_IR) in the same way that function
16439 gpio_read_out_bit() reads a bit from the GPIO Output Register
16442 Second, it modifies function gpio_set_chip_configuration() to provide
16443 an additional option for configuring the GPIO from the
16444 "CFG_4xx_GPIO_TABLE".
16446 According to the 440EPx User's Manual, when an alternate output is used,
16447 the three-state control is configured in one of two ways, depending on
16448 the particular output. The first option is to select the corresponding
16449 alternate three-state control in the GPIOx_TRSH/L registers. The second
16450 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
16451 the GPIOx_TRSH/L registers, and set the corresponding bit in the
16452 GPIOx_TCR register to enable the output. For example, the Manual
16453 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
16454 the alternate three-state control (first option), and specifies
16455 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
16456 enabled in the GPIOx_TCR register (second option).
16458 Currently, gpio_set_chip_configuration() configures all alternate signal
16459 outputs to use the first option. This patch allow the second option to
16460 be selected by setting the "out_val" element in the table entry to
16461 "GPIO_OUT_1". The first option is used when the "out_val" element is
16462 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
16463 alternate signal is selected, and because all current GPIO tables set
16464 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
16465 not change any existing configurations.
16467 Signed-off-by: Larry Johnson <lrj@acm.org>
16469 commit 196404cdc1de495d6182e84731c200fc5748df15
16470 Author: Larry Johnson <lrj@arlinx.com>
16471 Date: Sun Dec 30 01:01:54 2007 -0500
16473 PPC4xx: Remove sdram.h from board/lwmon5
16475 These definitions are now in "include/ppc440.h".
16477 Signed-off-by: Larry Johnson <lrj@acm.org>
16479 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
16480 Author: Larry Johnson <lrj@arlinx.com>
16481 Date: Sun Dec 30 01:01:32 2007 -0500
16483 PPC4xx: Use common code for LWMON5 board SDRAM support
16485 This patch also modifies the functionality of the code so that the data-eye
16486 search is now done with with the cache disabled.
16488 Signed-off-by: Larry Johnson <lrj@acm.org>
16490 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
16491 Author: Larry Johnson <lrj@arlinx.com>
16492 Date: Sun Dec 30 01:01:14 2007 -0500
16494 PPC4xx: Remove sdram.h from board/amcc/sequoia
16496 These definitions are now in "include/ppc440.h".
16498 Signed-off-by: Larry Johnson <lrj@acm.org>
16500 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
16501 Author: Larry Johnson <lrj@arlinx.com>
16502 Date: Sun Dec 30 01:00:50 2007 -0500
16504 PPC4xx: Use common code for Sequoia board SDRAM support
16506 Signed-off-by: Larry Johnson <lrj@acm.org>
16508 commit 8b0c5c127690335758100c25eaec2b84db97c101
16509 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16510 Date: Thu Dec 27 16:58:41 2007 +0100
16512 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
16514 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
16515 networking stack does not automatically switch to
16516 another interface. This patch does not touch the default
16519 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16520 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16522 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
16523 Author: Upakul Barkakaty <upakul@gmail.com>
16524 Date: Thu Nov 29 12:16:13 2007 +0530
16526 NET: Proper return code handling in eth_init() function in file eth.c
16528 This patch modifies the return code handling in the eth_init()
16529 function, to be compatible with the handling of the return codes in
16530 the other network stack files. It now returns a 0 on Success and -1 on
16533 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
16534 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16536 commit 5ca2d0953e4579a80810966cca2077e20d912c97
16537 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
16538 Date: Mon Nov 19 20:27:04 2007 +0900
16540 net/eth.c: Fix env_enetaddr signed overflow
16542 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
16545 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
16553 Warning: NEC-Candy MAC addresses don't match:
16554 Address in SROM is 00:00:4C:80:92:A2
16555 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
16557 This patch changes env_enetaddr type from `char' to `unsigned char'.
16559 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
16560 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
16561 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16563 commit f85b60710571b37293d2233933b76e2aa3db5635
16564 Author: Rafal Jaworowski <raj@semihalf.com>
16565 Date: Thu Dec 27 18:19:02 2007 +0100
16567 Introduce new eth_receive routine
16569 The purpose of this routine is receiving a single network frame, outside of
16570 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
16571 U-Boot will let them utilise networking facilities. For sending a raw frame
16572 the already existing eth_send() can be used.
16574 The direct consumer of this routine is the newly introduced API layer for
16575 external applications (enabled with CONFIG_API).
16577 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
16578 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
16579 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16581 commit 5c740711f0ea5b51414b341b71597c4a0751be74
16582 Author: Jon Loeliger <jdl@freescale.com>
16583 Date: Thu Jan 3 10:41:04 2008 -0600
16585 8610: Move include of config.h earlier.
16587 Include config.h earlier in the set of #includes
16588 so as to avoid a incidental and duplicate definition
16589 of CFG_CACHELINE_SIZE.
16591 Signed-off-by: Jon Loeliger
16593 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
16594 Author: Jon Loeliger <jdl@freescale.com>
16595 Date: Tue Dec 4 10:53:34 2007 -0600
16597 Don't slam #undef DEBUG in the 8641HPCN config file.
16599 Doing so prevents it from being individually set
16600 and useful in other files.
16602 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16604 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
16605 Author: Jon Loeliger <jdl@freescale.com>
16606 Date: Wed Nov 28 14:47:18 2007 -0600
16608 Convert MPC8641HPCN to use libfdt.
16610 Assumes the presence of the aliases node in the DTS to
16611 locate the ethernet, pci and serial nodes for fixups.
16613 Use consistent fdtaddr and fdtfile in environment variables.
16615 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16617 commit ce37422d0002e10490e268392e0c4e3028e52cec
16618 Author: Stefan Roese <sr@denx.de>
16619 Date: Wed Jan 2 14:06:26 2008 +0100
16621 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
16623 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
16624 flash chips connected to a 32bit wide port.
16626 Signed-off-by: Stefan Roese <sr@denx.de>
16628 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
16629 Author: Wolfgang Denk <wd@denx.de>
16630 Date: Wed Jan 2 15:58:44 2008 +0100
16632 Fix compile problem introduced by "cleanup" commit 3dfd708c
16634 Signed-off-by: Wolfgang Denk <wd@denx.de>
16636 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
16637 Author: Wolfgang Denk <wd@denx.de>
16638 Date: Wed Jan 2 15:54:45 2008 +0100
16640 Make scripts and Makefiles POSIX compliant
16642 The bash builtin versions of the "test" (resp. "[") command allow
16643 using "==" for string comparisons, but POSIX compatible implemen-
16644 tations (like /usr/bin/test) insist on using "=" only. On such systems
16647 $ /usr/bin/test a == a && echo OK
16648 /usr/bin/test: ==: binary operator expected
16650 This patch fixes Makefiles and scripts to use POSIX style.
16652 Signed-off-by: Wolfgang Denk <wd@denx.de>
16654 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
16655 Author: Stefan Roese <sr@denx.de>
16656 Date: Wed Jan 2 14:05:37 2008 +0100
16658 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
16660 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
16661 flash chips connected to a 32bit wide port.
16663 Signed-off-by: Stefan Roese <sr@denx.de>
16665 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
16666 Author: Wolfgang Denk <wd@denx.de>
16667 Date: Wed Jan 2 12:38:43 2008 +0100
16669 Minor coding style cleanup.
16671 Signed-off-by: Wolfgang Denk <wd@denx.de>
16673 commit e174ac34adf5d5653df12bc3cf19c52063a71269
16674 Author: Stefan Roese <sr@denx.de>
16675 Date: Fri Dec 28 17:29:56 2007 +0100
16677 ppc4xx: Coding style cleanup
16679 Signed-off-by: Stefan Roese <sr@denx.de>
16681 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
16682 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16683 Date: Fri Dec 28 17:07:24 2007 +0100
16685 ppc4xx: Complete PMC440 board support
16687 This patch brings the PMC440 board configuration file.
16688 Finally it enables the PMC440 board support.
16690 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16692 commit 407843a582560fc5231299561ab3c2b6b6cd3397
16693 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16694 Date: Fri Dec 28 17:07:18 2007 +0100
16696 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
16698 This patch adds some BSP commands and FPGA booting support
16699 for esd's PMC440 boards.
16701 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16703 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
16704 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16705 Date: Fri Dec 28 17:07:14 2007 +0100
16707 ppc4xx: Add initial esd PMC440 board files
16709 This patch adds the first files for the new esd PMC440 boards.
16710 The next two patches will complete the PMC440 board support.
16712 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16714 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
16715 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16716 Date: Fri Dec 28 17:10:36 2007 +0100
16718 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
16720 - add EEPROM write protection for esd PLU405 boards.
16721 - initialize NAND GPIOs
16722 - use correct io accessors
16725 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16727 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
16728 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16729 Date: Fri Dec 28 17:10:44 2007 +0100
16731 ppc4xx: use correct io accessors for esd's LCD code
16733 This patch fixes esd's LCD dectection code to work correctly with
16734 newer gcc versions.
16736 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16738 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
16739 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16740 Date: Fri Dec 28 17:10:42 2007 +0100
16742 ppc4xx: Maintenance patch for VOH405 boards
16744 - add EEPROM write protection
16745 - initialize NAND GPIOs
16746 - use correct io accessors
16747 - slow down I2C clock to 100kHz
16748 - enable ext. I2C bus
16751 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16753 commit c05569066dbcba3fdf36d4d1943df265dc316a86
16754 Author: Stefan Roese <sr@denx.de>
16755 Date: Fri Dec 28 16:08:08 2007 +0100
16757 ppc4xx: Enable 405EP PCI arbiter per default on all boards
16759 In an attmemt to clean up the 4xx start.S file, I removed the enabling
16760 of the internal 405EP PCI arbiter. This is needed for multiple other
16761 405EP platforms, like most of the esd 405EP. Now the internal PCI
16762 arbiter is enabled again per default as it has been before.
16764 Signed-off-by: Stefan Roese <sr@denx.de>
16765 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16767 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
16768 Author: Stefan Roese <sr@denx.de>
16769 Date: Fri Dec 28 15:53:46 2007 +0100
16771 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
16773 Signed-off-by: Stefan Roese <sr@denx.de>
16774 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16776 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
16777 Author: Stefan Roese <sr@denx.de>
16778 Date: Fri Dec 28 06:06:04 2007 +0100
16780 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
16782 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
16783 platforms mentioned above.
16785 Signed-off-by: Stefan Roese <sr@denx.de>
16787 commit b568fd25574181a3b12ae3d66b2913903442cb83
16788 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16789 Date: Thu Dec 27 17:03:46 2007 +0100
16791 Remove CPCI440 board
16793 This board never left prototyping state and it
16794 became a millstone round my neck. So remove it.
16796 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16798 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
16799 Author: Larry Johnson <lrj@arlinx.com>
16800 Date: Thu Dec 27 11:28:51 2007 -0500
16802 Add support for Korat PPC440EPx board
16804 These patches add support for the PPC440EPx-based "Korat" board to
16805 U-Boot. They are based primarily on support for the Sequoia board.
16807 Signed-off-by: Larry Johnson <lrj@acm.org>
16809 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
16810 Author: Larry Johnson <lrj@arlinx.com>
16811 Date: Sat Dec 22 15:16:25 2007 -0500
16813 Add configuration file for Korat board
16815 This patch supplies the configuration file for the Korat PPC440EPx-
16818 Signed-off-by: Larry Johnson <lrj@acm.org>
16820 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
16821 Author: Larry Johnson <lrj@arlinx.com>
16822 Date: Sat Dec 22 15:16:11 2007 -0500
16824 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
16826 Signed-off-by: Larry Johnson <lrj@acm.org>
16828 commit aba19604d848b2838cfb9ebe818909e6a216058e
16829 Author: Larry Johnson <lrj@arlinx.com>
16830 Date: Thu Dec 27 10:54:48 2007 -0500
16832 Add 440EPx DDR2 SPD DIMM support
16834 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
16835 controller. It should also work on the 440GRx. It is based on the DDR2
16836 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
16838 This code has been tested on prototype Korat boards with three Kingston
16839 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
16840 (two ranks). The Korat board has a single DIMM socket, but support has
16841 been provided (though not tested) for boards with two DIMM sockets.
16843 Signed-off-by: Larry Johnson <lrj@acm.org>
16845 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
16846 Author: Larry Johnson <lrj@arlinx.com>
16847 Date: Sat Dec 22 15:15:30 2007 -0500
16849 Copy 440EPx/GRx SDRAM data-eye search to common directory
16851 This patch creates a non-board-specific file for performing the SDRAM
16852 data-eye search. It also adds ECC error checking to the test of valid
16853 data on readback when ECC is enabled.
16855 Signed-off-by: Larry Johnson <lrj@acm.org>
16857 commit c46f53333b22b1f9098676bea8884fc7db820cf3
16858 Author: Larry Johnson <lrj@arlinx.com>
16859 Date: Sat Dec 22 15:15:13 2007 -0500
16861 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
16863 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
16864 It also fixes two typos in the definitions, so the board-specific
16865 "sdram.h" files containing these definitions are also fixed to avoid
16868 Signed-off-by: Larry Johnson <lrj@acm.org>
16870 commit c348578bf612d0c56d8d376d23cae16defbd86af
16871 Author: Larry Johnson <lrj@arlinx.com>
16872 Date: Thu Dec 27 10:50:55 2007 -0500
16874 Add Ethernet 1000BASE-X support for PPC4xx
16876 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
16877 is defined, the PHY will advertise it's capabilities for autonegotiation
16878 based on the capabilities shown in the PHY's status registers, including
16879 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
16880 advertise hard-coded capabilities, as before.
16882 Signed-off-by: Larry Johnson <lrj@acm.org>
16884 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
16885 Author: Larry Johnson <lrj@arlinx.com>
16886 Date: Thu Dec 27 09:52:17 2007 -0500
16888 Add driver for National Semiconductor LM73 temperature sensor
16890 This driver is based on the driver for the LM75.
16892 Signed-off-by: Larry Johnson <lrj@acm.org>
16894 commit 12618278688ea9b3d76536960a5ad2e3790fac40
16895 Author: Larry Johnson <lrj@arlinx.com>
16896 Date: Sat Dec 22 15:14:00 2007 -0500
16898 Add driver for STMicroelectronics M41T60 RTC
16900 This driver is based on the driver for the M41T11. In the intended
16901 application, the RTC will be powered by a large capacitor, rather than a
16902 battery. The driver therefore checks to see whether the RTC has lost
16903 power. The chip's OUT bit is normally reset from its power-up state. If
16904 the OUT bit is read as set, or if the date and time are not valid, then the
16905 RTC is assumed to have lost power, and its date and time are reset to
16906 1900-01-01 00:00:00.
16908 Support for adjusting the speed of the clock to improve accuracy is
16909 provided through an environment variable.
16911 Signed-off-by: Larry Johnson <lrj@acm.org>
16913 commit d3471173e14b7544bb60339eda8d3d3906694b0a
16914 Author: Larry Johnson <lrj@arlinx.com>
16915 Date: Sat Dec 22 15:34:39 2007 -0500
16917 Use out_be32() and friends to access memory-mapped registers in sequoia.c
16919 Signed-off-by: Larry Johnson <lrj@acm.org>
16921 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
16922 Author: Larry Johnson <lrj@arlinx.com>
16923 Date: Sat Dec 22 15:34:20 2007 -0500
16925 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
16927 Signed-off-by: Larry Johnson <lrj@acm.org>
16929 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
16930 Author: Larry Johnson <lrj@arlinx.com>
16931 Date: Sat Dec 22 15:23:50 2007 -0500
16933 Cosmetic changes to ECC POST for AMCC Denali core
16935 Signed-off-by: Larry Johnson <lrj@acm.org>
16937 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
16938 Author: Stefan Roese <sr@denx.de>
16939 Date: Wed Dec 26 20:20:19 2007 +0100
16941 ppc4xx: Fix compilation problem in 405 cache POST test
16943 Signed-off-by: Stefan Roese <sr@denx.de>
16945 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
16946 Author: Stefan Roese <sr@denx.de>
16947 Date: Sat Dec 22 12:20:09 2007 +0100
16949 ppc4xx: Move virtual address of POST cache test to bigger address
16951 On Sequoia & LWMON5 the virtual address of the POST cache test is now
16952 moved to a bigger address. This enables usage of more memory on those
16955 Signed-off-by: Stefan Roese <sr@denx.de>
16957 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
16958 Author: Stefan Roese <sr@denx.de>
16959 Date: Sat Dec 22 12:18:26 2007 +0100
16961 ppc4xx: Fix problem in 44x cache POST routine
16963 As repoted by Larry Johnson, running "diag run cache" caused a crash
16964 in U-Boot. This problem was introduced by a patch that removed the
16965 TLB entry for the cache test after the test has completed. Since this
16966 TLB was only setup once, a 2nd attempt to run this cache test
16967 failed with a crash. Now this TLB entry is created every time the
16970 Signed-off-by: Stefan Roese <sr@denx.de>
16972 commit b0265b576bb8fa9465f99e99c323768b562fadc2
16973 Author: Stefan Roese <sr@denx.de>
16974 Date: Fri Dec 21 07:51:29 2007 +0100
16976 ppc4xx: Update Makalu fdt support
16978 Signed-off-by: Stefan Roese <sr@denx.de>
16980 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
16981 Author: Stefan Roese <sr@denx.de>
16982 Date: Wed Dec 19 09:05:40 2007 +0100
16984 ppc4xx: Add fdt support to AMCC Katmai eval board
16986 Signed-off-by: Stefan Roese <sr@denx.de>
16988 commit 328a340392a5df9aaf00792be989df73e750859e
16989 Author: Stefan Roese <sr@denx.de>
16990 Date: Tue Dec 18 08:44:51 2007 +0100
16992 ppc4xx: fdt: Cleanup setup of cpu node setup
16994 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
16995 without using the absolute path to the cpu node. This makes it possible
16996 to use this U-Boot version with both versions of cpu-node naming
16997 "cpu@0" and the former "PowerPC,440EPx@0".
16999 Signed-off-by: Stefan Roese <sr@denx.de>
17001 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
17002 Author: Stefan Roese <sr@denx.de>
17003 Date: Mon Dec 17 17:26:21 2007 +0100
17005 ppc4xx: Fix lwmon5 compilation problem
17007 Now that the 440EPx ECC test is not board specific anymore
17008 remove this Makefile.
17010 Signed-off-by: Stefan Roese <sr@denx.de>
17012 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
17013 Author: Anatolij Gustschin <agustschin@t-online.de>
17014 Date: Wed Dec 5 17:43:20 2007 +0100
17016 Fix ppc4xx clear_bss() code
17018 ppc4xx clear_bss() fails if BSS segment size is not
17019 divisible by 4 without remainder. This patch provides
17020 fix for this problem.
17022 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17024 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
17025 Author: Niklaus Giger <niklausgiger@gmx.ch>
17026 Date: Fri Nov 30 18:35:11 2007 +0100
17028 PPC4xx: Minimal changes to add vxWorks support
17030 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
17032 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
17033 Author: Markus Klotzbücher <mk@denx.de>
17034 Date: Fri Nov 23 13:09:18 2007 +0100
17036 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
17038 When using dhcp/bootp the "netmask" environment variable is not
17039 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
17040 desireable, so the following patch adds this this option to the board
17043 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17044 Signed-off-by: Stefan Roese <sr@denx.de>
17046 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
17047 Author: Larry Johnson <lrj@arlinx.com>
17048 Date: Sat Oct 27 12:48:15 2007 -0400
17050 Fix/enhance ECC POST for 440EPx/GRx
17052 This patch allows the ECC POST to be used for different boards with the
17053 PPC440 Denali SDRAM controller. Modifications include skipping the test
17054 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
17055 to prevent timing errors.
17057 Signed-off-by: Larry Johnson <lrj@acm.org>
17059 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
17060 Author: Larry Johnson <lrj@arlinx.com>
17061 Date: Sat Oct 27 12:48:05 2007 -0400
17063 PPC4xx: Move/rename ECC POST for 440EPx/GRx
17065 Signed-off-by: Larry Johnson <lrj@acm.org>
17067 commit c29d2d3680046d430022c55e50fcb27f5866517e
17068 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17069 Date: Fri Dec 14 11:20:33 2007 +0100
17071 ppc4xx: use correct io accessors for 4xx ethernet POST
17073 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17075 commit ba79fde58a48c0a6ff8e2a96caba951594142203
17076 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17077 Date: Fri Dec 14 11:19:56 2007 +0100
17079 ppc4xx: fix flush + invalidate_dcache_range arguments
17081 flush + invalidate_dcache_range() expect the start and stop+1 address.
17082 So the stop address is the first address behind (!) the range.
17084 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17086 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
17087 Author: Stefan Roese <sr@denx.de>
17088 Date: Fri Dec 14 08:41:29 2007 +0100
17090 ppc4xx: fdt: use fdt_fixup_ethernet()
17092 By using aliases in the dts file, the ethernet node fixup is
17093 much easier with the recently added functions.
17095 Please note that the dts file needs the aliases for this to work.
17097 Signed-off-by: Stefan Roese <sr@denx.de>
17099 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
17100 Author: Stefan Roese <sr@denx.de>
17101 Date: Thu Dec 13 14:52:53 2007 +0100
17103 ppc4xx: Bring 4xx fdt support up-to-date
17105 This patch update the 4xx fdt support. It enabled fdt booting
17106 on the AMCC Kilauea and Sequoia for now. More can follow later
17109 Signed-off-by: Stefan Roese <sr@denx.de>
17111 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
17112 Author: Stefan Roese <sr@denx.de>
17113 Date: Thu Dec 27 07:50:54 2007 +0100
17115 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
17117 The check for an sufficiently erased destination was missing in the
17118 buffered write function of the cfi flash driver (when
17119 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
17120 writing to such a region will fail with the currect error message.
17122 Signed-off-by: Stefan Roese <sr@denx.de>
17124 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
17125 Author: Martin Krause <martin.krause@tqs.de>
17126 Date: Mon Nov 12 10:56:17 2007 +0100
17128 Some configuration updates for the TQM5200 based TB5200 board:
17130 - enable command line history
17131 - increase malloc space (because of bigger flash sectors)
17133 Signed-off-by: Martin Krause <martin.krause@tqs.de>
17135 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
17136 Author: Martin Krause <martin.krause@tqs.de>
17137 Date: Thu Sep 27 11:10:08 2007 +0200
17139 TQM8xx: use the CFI flash driver on all TQM8xx boards
17141 Signed-off-by: Martin Krause <martin.krause@tqs.de>
17143 commit 11d9eec479b470eab9242ab937fca70a876d9376
17144 Author: Martin Krause <martin.krause@tqs.de>
17145 Date: Wed Sep 26 17:55:56 2007 +0200
17147 TQM885D: adjust for doubled flash sector size + some minor fixes
17149 Signed-off-by: Martin Krause <martin.krause@tqs.de>
17151 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
17152 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
17153 Date: Wed Sep 26 17:55:54 2007 +0200
17155 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
17157 CAS-Latency=2, Write Recovery Time tWR=2
17158 The max. supported bus frequency is 66 MHz. Therefore, changed
17159 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
17161 Signed-off-by: Martin Krause <martin.krause@tqs.de>
17163 commit b988b8cd443989be65161888eea0127ad03f846f
17164 Author: Martin Krause <martin.krause@tqs.de>
17165 Date: Wed Sep 26 17:55:56 2007 +0200
17167 TQM885D: use calculated cpuclk instead of measuring it
17169 On the TQM885D the measurement of cpuclk with the PIT reference
17170 timer ist not necessary. Since all module variants use the same
17171 external 10 MHz oscillator, the cpuclk only depends on the PLL
17172 configuration - which is readable by software.
17174 Signed-off-by: Martin Krause <martin.krause@tqs.de>
17176 commit 492c7049869348d31168de8dad89651315e468e0
17177 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
17178 Date: Thu Sep 27 14:54:46 2007 +0200
17180 TQM885D: fix SDRAM refresh
17182 At 133 MHz the current SDRAM refresh rate is too fast
17183 (measured 4 * 1.17 us).
17184 CFG_MAMR_PTA changes from 39 to 128. This result
17185 in a refresh rate of 4 * 7.8 us at the default clock
17186 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
17187 This is a compromise until a new method is found to
17188 adjust the refresh rate.
17190 Signed-off-by: Martin Krause <martin.krause@tqs.de>
17192 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
17193 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
17194 Date: Thu Sep 27 14:54:46 2007 +0200
17196 TQM860M: Support for 10col SDRAMs, max. 128 MiB
17198 Signed-off-by: Martin Krause <martin.krause@tqs.de>
17200 commit 61fb15c516fef5631e305f1976d7b3a679725856
17201 Author: Wolfgang Denk <wd@denx.de>
17202 Date: Thu Dec 27 01:52:50 2007 +0100
17204 Fix coding style issues; update CHANGELOG.
17206 Signed-off-by: Wolfgang Denk <wd@denx.de>
17208 commit 467bcee11fe26ad422f2de971aa70866079870f2
17209 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17210 Date: Fri Dec 14 15:36:18 2007 +0100
17212 cfi_flash: Add manufacturer-specific fixups
17214 Run fixups based on the JEDEC manufacturer ID independent of the
17217 This changes current behaviour: Previously, geometry reversal for AMD
17218 chips were done based on the command set ID, while they are now done
17219 based on the JEDEC manufacturer and device ID.
17221 Also add fixup for top-boot Atmel chips. A fixup is needed for
17222 AT49BV6416(T) too, but since u-boot currently only reads the low byte
17223 of the device ID, there's no way to tell it apart from AT49BV642D,
17224 which should not have this fixup. Since AT49BV642D support is
17225 necessary to get ATNGW100 board support into mainline, I've commented
17226 out the fixup for now.
17228 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17230 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
17231 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17232 Date: Fri Dec 14 15:36:17 2007 +0100
17234 cfi_flash: Add cmdset-specific init functions
17236 Move things like reading JEDEC IDs and fixing up geometry reversal
17237 into separate functions. The geometry reversal fixup is now performed
17238 by altering the qry structure directly, which makes the sector init
17239 code slightly cleaner.
17241 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17243 commit e23741f4a6d8047520ef0d4971762749b3587d32
17244 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17245 Date: Fri Dec 14 15:36:16 2007 +0100
17247 cfi_flash: Read whole QRY structure in one go
17249 Read out the whole CFI Standard Query structure after successful cfi
17250 identification. This allows subsequent code to access this information
17251 directly without having to go through flash_read_uchar() and friends.
17253 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17255 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
17256 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17257 Date: Mon Dec 17 11:02:44 2007 +0100
17259 AVR32: Fix logic inversion in disable_interrupts()
17261 disable_interrupts() should return nonzero if interrupts were
17262 _enabled_ before, not disabled.
17264 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17266 commit acac475212cbedb17b321a363a1c878e2b47b37f
17267 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17268 Date: Fri Dec 14 16:51:22 2007 +0100
17270 AVR32: Enable interrupts at bootup
17272 The timer code depends on the timer interrupt to keep track of the
17273 upper 32 bits of the cycle counter. This obviously doesn't work when
17274 interrupts are disabled the whole time.
17276 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17278 commit 9570bcd87f4db255514f43b6701746c412f8fef0
17279 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17280 Date: Thu Nov 15 10:03:45 2007 +0100
17282 AVR32: Fix wrong pin setup for USART3
17284 As reported by Gerhard Berghofer:
17286 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
17287 instead of PB18 and PB19.
17289 which is obviously correct. There's currently no code that uses
17290 USART3, but custom boards may run into problems.
17292 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17294 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
17295 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17296 Date: Thu Nov 1 12:44:20 2007 +0100
17298 README: Remove ATSTK1000 daughterboard list
17300 As noted by Kim Phillips, these lists tend to become out of date.
17302 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17304 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
17305 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17306 Date: Tue Oct 30 14:56:36 2007 +0100
17308 Add ATSTK100[234] to MAINTAINERS
17310 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
17311 "mother". Also update the entry for ATSTK1000 to be not only about the
17312 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
17314 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17316 commit 64ff2357b1727213803591813dbc779c924bf772
17317 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17318 Date: Mon Oct 29 13:02:54 2007 +0100
17320 AVR32: Add support for the ATSTK1004 board
17322 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
17323 which is a derivative of AT32AP7000.
17325 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17327 commit 667568db157f374b85abd7e03596ddd1f0b25681
17328 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17329 Date: Mon Oct 29 13:02:54 2007 +0100
17331 AVR32: Add support for the ATSTK1003 board
17333 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
17334 which is a derivative of AT32AP7000.
17336 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17338 commit 5fee84a794a51ec830548cda485a770efb018b92
17339 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17340 Date: Mon Oct 29 13:23:33 2007 +0100
17342 AVR32: Make some AT32AP700x peripherals optional
17344 Add a chip-features file providing definitions of the form
17346 AT32AP700x_CHIP_HAS_<peripheral>
17348 to indicate the availability of the given peripheral on the currently
17351 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17353 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
17354 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17355 Date: Mon Oct 29 13:09:56 2007 +0100
17357 AVR32: Rename at32ap7000 -> at32ap700x
17359 The SoC-specific code for all the AT32AP700x CPUs is practically
17360 identical; the only difference is that some chips have less features
17361 than others. By doing this rename, we can add support for the AP7000
17362 derivatives simply by making some features conditional.
17364 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17366 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
17367 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17368 Date: Fri Jun 29 18:22:34 2007 +0200
17370 atmel_mci: Show SR when block read fails
17372 Show controller status as well as card status when an error occurs
17375 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17377 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
17378 Author: Stefan Roese <sr@denx.de>
17379 Date: Thu Dec 13 14:52:53 2007 +0100
17381 ppc4xx: Bring 4xx fdt support up-to-date
17383 This patch update the 4xx fdt support. It enabled fdt booting
17384 on the AMCC Kilauea and Sequoia for now. More can follow later
17387 Signed-off-by: Stefan Roese <sr@denx.de>
17389 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
17390 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17391 Date: Thu Dec 13 12:56:34 2007 +0100
17393 cfi_flash: Use map_physmem() and unmap_physmem()
17395 Use map_physmem() and unmap_physmem() to convert from physical to
17396 virtual addresses. This gives the arch a chance to provide an uncached
17397 mapping for flash accesses.
17399 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17401 commit 4d7d6936eb29af7cca330937808312aa5f61454d
17402 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17403 Date: Thu Dec 13 12:56:33 2007 +0100
17405 Introduce map_physmem() and unmap_physmem()
17407 map_physmem() returns a virtual address which can be used to access a
17408 given physical address without involving the cache. unmap_physmem()
17409 should be called when the virtual address returned by map_physmem() is
17412 This patch adds a stub implementation which simply returns the
17413 physical address cast to a uchar * for all architectures except AVR32,
17414 which converts the physical address to an uncached virtual mapping.
17415 unmap_physmem() is a no-op on all architectures, but if any
17416 architecture needs to do such mappings through the TLB, this is the
17417 hook where those TLB entries can be invalidated.
17419 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17421 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
17422 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17423 Date: Thu Dec 13 12:56:32 2007 +0100
17425 cfi_flash: Introduce read and write accessors
17427 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
17428 them to access the flash memory. This makes it clearer when the flash
17429 is actually being accessed; merely dereferencing a volatile pointer
17430 looks just like any other kind of access.
17432 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17434 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
17435 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17436 Date: Thu Dec 13 12:56:31 2007 +0100
17438 Implement __raw_{read,write}[bwl] on all architectures
17440 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
17441 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
17444 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17446 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
17447 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17448 Date: Sat Oct 6 18:55:36 2007 +0200
17450 cfi_flash: Reorder functions and eliminate extra prototypes
17452 Reorder the functions in cfi_flash.c so that each function only uses
17453 functions that have been defined before it. This allows the static
17454 prototype declarations near the top to be eliminated and might allow
17455 gcc to do a better job inlining functions.
17457 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17459 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
17460 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17461 Date: Thu Dec 13 12:56:29 2007 +0100
17463 cfi_flash: Make some needlessly global functions static
17465 Make functions not declared in any header file static.
17467 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17469 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
17470 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
17471 Date: Thu Dec 13 12:56:28 2007 +0100
17473 cfi_flash: Break long lines
17475 This patch tries to keep all lines in the cfi_flash driver below 80
17476 columns. There are a few lines left which don't fit this requirement
17477 because I couldn't find any trivial way to break them (i.e. it would
17478 take some restructuring, which I intend to do in a later patch.)
17480 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
17482 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
17483 Author: Bartlomiej Sieka <tur@semihalf.com>
17484 Date: Tue Dec 11 13:59:57 2007 +0100
17486 CFI: synchronize command offsets with Linux CFI driver
17488 Fixes non-working CFI Flash on the Inka4x0 board.
17490 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
17492 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
17493 Author: Kumar Gala <galak@kernel.crashing.org>
17494 Date: Fri Dec 7 12:17:34 2007 -0600
17496 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
17498 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
17499 (MPC8544DS, MPC8548CDS, MPC8568MDS).
17501 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17503 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
17504 Author: Kumar Gala <galak@kernel.crashing.org>
17505 Date: Fri Dec 7 12:04:30 2007 -0600
17507 Update Freescale MPC85xx ADS/CDS/MDS board config
17509 * Enabled CONFIG_CMD_ELF
17511 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17513 commit d435793229ce29a42797c1edc39f5b34f987f91a
17514 Author: Kumar Gala <galak@kernel.crashing.org>
17515 Date: Fri Dec 7 04:59:26 2007 -0600
17517 Handle Asynchronous DDR clock on 85xx
17519 The MPC8572 introduces the concept of an asynchronous DDR clock with
17520 regards to the platform clock.
17522 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
17525 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17527 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
17528 Author: Kumar Gala <galak@kernel.crashing.org>
17529 Date: Thu Nov 29 10:34:28 2007 -0600
17531 Update Freescale MPC85xx ADS/CDS/MDS board config
17533 * Removed some misc environment setup
17534 * Enabled CONFIG_CMDLINE_EDITING
17536 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17538 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
17539 Author: Kumar Gala <galak@kernel.crashing.org>
17540 Date: Thu Nov 29 10:47:44 2007 -0600
17542 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
17544 Minor path corrections needed to ensure buildability.
17546 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17548 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
17549 Author: Kumar Gala <galak@kernel.crashing.org>
17550 Date: Thu Nov 29 10:16:18 2007 -0600
17552 Move the MPC8540 ADS board under board/freescale.
17554 Minor path corrections needed to ensure buildability.
17556 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17558 commit 870ceac5b3a3486c109396e005af81ae762b5710
17559 Author: Kumar Gala <galak@kernel.crashing.org>
17560 Date: Thu Nov 29 10:14:50 2007 -0600
17562 Move the MPC8560 ADS board under board/freescale.
17564 Minor path corrections needed to ensure buildability.
17566 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17568 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
17569 Author: Kumar Gala <galak@kernel.crashing.org>
17570 Date: Thu Nov 29 10:13:47 2007 -0600
17572 Move the MPC8568 MDS board under board/freescale.
17574 Minor path corrections needed to ensure buildability.
17576 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17578 commit a853d56c59b33415304531443633808736acfc6e
17579 Author: Kumar Gala <galak@kernel.crashing.org>
17580 Date: Thu Nov 29 02:18:59 2007 -0600
17582 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
17584 We already had defines for LAWAR_TRGT_IF_* that we should use
17585 rather than creating new ones. Also, added some missing defines for
17588 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17590 commit 04db400892da37b76a585e332a0c137954ad2015
17591 Author: Kumar Gala <galak@kernel.crashing.org>
17592 Date: Thu Nov 29 02:10:09 2007 -0600
17594 Stop using immap_t on 85xx
17596 In the future the offsets to various blocks may not be in same location.
17597 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
17598 instead of getting it via &immap.
17600 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17602 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
17603 Author: Kumar Gala <galak@kernel.crashing.org>
17604 Date: Thu Nov 29 01:23:09 2007 -0600
17606 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
17608 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17610 commit c480861bf000156e6a3e932c258db59ff2212dd3
17611 Author: Kumar Gala <galak@kernel.crashing.org>
17612 Date: Thu Nov 29 01:06:19 2007 -0600
17614 Update MPC8568 MDS to use libfdt
17616 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
17617 ethernet, pci, and serial for the various fixups that are done.
17619 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17621 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
17622 Author: Haiying Wang <Haiying.Wang@freescale.com>
17623 Date: Wed Nov 14 15:52:06 2007 -0500
17625 Add PCI Express support on MPC8568MDS
17627 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
17628 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17630 commit b90d25497625b90ffa3f2911a0895ca237556ff5
17631 Author: Kumar Gala <galak@kernel.crashing.org>
17632 Date: Thu Nov 29 00:11:44 2007 -0600
17634 Update MPC85xx CDS to use libfdt
17636 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
17637 ethernet, pci, and serial for the various fixups that are done.
17639 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17641 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
17642 Author: Kumar Gala <galak@kernel.crashing.org>
17643 Date: Wed Nov 28 22:54:27 2007 -0600
17645 Update MPC8540 ADS to use libfdt
17647 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
17648 ethernet, pci, and serial for the various fixups that are done.
17650 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17652 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
17653 Author: Kumar Gala <galak@kernel.crashing.org>
17654 Date: Wed Nov 28 22:40:31 2007 -0600
17656 Update MPC8560 ADS to use libfdt
17658 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
17659 ethernet, pci, and serial for the various fixups that are done.
17661 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17663 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
17664 Author: Kumar Gala <galak@kernel.crashing.org>
17665 Date: Wed Nov 28 00:36:33 2007 -0600
17667 Stop using immap_t for cpm offset on 85xx
17669 In the future the offsets to various blocks may not be in same location.
17670 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
17671 instead of getting it via &immap->im_cpm.
17673 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17675 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
17676 Author: Kumar Gala <galak@kernel.crashing.org>
17677 Date: Tue Nov 27 23:25:02 2007 -0600
17679 Stop using immap_t for guts offset on 85xx
17681 In the future the offsets to various blocks may not be in same location.
17682 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
17683 instead of getting it via &immap->im_gur.
17685 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17687 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
17688 Author: Kumar Gala <galak@kernel.crashing.org>
17689 Date: Tue Nov 27 22:42:34 2007 -0600
17691 Update MPC8544 DS config
17693 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
17694 * Removed some misc environment setup
17695 * Moved to using fdtfile & fdtaddr as fdt env var names
17696 * Enabled CONFIG_CMDLINE_EDITING
17698 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17700 commit addce57e2e4c49e77ffb2020a84690713bb18b47
17701 Author: Kumar Gala <galak@kernel.crashing.org>
17702 Date: Mon Nov 26 17:12:24 2007 -0600
17704 Update MPC8544DS to use libfdt
17706 Updated the MPC8544DS config to use libfdt and assume use of aliases for
17707 ethernet, pci, and serial for the various fixups that are done.
17709 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17711 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
17712 Author: Kumar Gala <galak@kernel.crashing.org>
17713 Date: Thu Nov 29 00:15:30 2007 -0600
17715 Add libfdt based ft_cpu_setup for mpc85xx
17717 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17719 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
17720 Author: Stefan Roese <sr@denx.de>
17721 Date: Tue Dec 11 13:38:19 2007 +0100
17723 ppc4xx: Correct GPIO offset in gpio_config()
17725 Thanks to Gary Jennejohn for pointing this out.
17727 Signed-off-by: Stefan Roese <sr@denx.de>
17729 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
17730 Author: Stefan Roese <sr@denx.de>
17731 Date: Tue Dec 11 11:46:01 2007 +0100
17733 rtc: Fix merging problem
17735 Signed-off-by: Stefan Roese <sr@denx.de>
17737 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
17738 Author: Stefan Roese <sr@denx.de>
17739 Date: Sat Dec 8 14:47:34 2007 +0100
17741 ppc4xx: 405EX: Correctly enable USB pins
17743 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
17744 function control) registers. This is done for the AMCC Kilauea and
17745 Makalu eval boards.
17747 Signed-off-by: Stefan Roese <sr@denx.de>
17749 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
17750 Author: Stefan Roese <sr@denx.de>
17751 Date: Sat Dec 8 08:25:09 2007 +0100
17753 CFI: Coding style cleanup
17755 Signed-off-by: Stefan Roese <sr@denx.de>
17757 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
17758 Author: Michael Schwingen <michael@schwingen.org>
17759 Date: Fri Dec 7 23:35:02 2007 +0100
17761 CFI: support JEDEC flash roms in CFI-flash framework
17763 The following patch adds support for non-CFI flash ROMS, by hooking into the
17764 CFI flash code and using most of its code, as recently discussed here in the
17765 thread "Mixing CFI and non-CFI flashs".
17767 Signed-off-by: Michael Schwingen <michael@schwingen.org>
17768 Signed-off-by: Stefan Roese <sr@denx.de>
17770 commit c01b17dd856fa120b2970f50d9598546a4927ec3
17771 Author: Gerald Van Baren <vanbaren@cideas.com>
17772 Date: Wed Nov 28 21:24:50 2007 -0500
17774 Conditionally compile fdt_fixup_ethernet()
17776 Fix compiler warnings: On boards that don't have ethernets defined,
17777 don't compile fdt_fixup_ethernet().
17779 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
17780 Author: Kumar Gala <galak@kernel.crashing.org>
17781 Date: Tue Nov 27 21:59:46 2007 -0600
17783 Convert boards that set memory node to use fdt_fixup_memory()
17785 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17787 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
17788 Author: Kumar Gala <galak@kernel.crashing.org>
17789 Date: Mon Nov 26 17:06:15 2007 -0600
17791 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
17793 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
17794 determine which serial alias we should set linux,stdout-path to.
17796 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17798 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
17799 Author: Kumar Gala <galak@kernel.crashing.org>
17800 Date: Mon Nov 26 14:57:45 2007 -0600
17802 Add common memory fixup function
17804 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
17806 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17808 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
17809 Author: Kumar Gala <galak@kernel.crashing.org>
17810 Date: Mon Nov 26 11:19:12 2007 -0600
17812 Conditionally compile fdt_support.c
17814 Modify common/Makefile to conditionally compile fdt_support.c based
17815 on CONFIG_OF_LIBFDT.
17817 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17819 commit d88e7ba0980773479e1a64badb293116071b7ef0
17820 Author: Kumar Gala <galak@kernel.crashing.org>
17821 Date: Mon Nov 26 10:41:40 2007 -0600
17823 Fix build breakage due to libfdt import
17825 The IDS8247 got lost in the update and need an API update
17826 do to rename of functions in libfdt.
17828 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17830 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
17831 Author: Gerald Van Baren <vanbaren@cideas.com>
17832 Date: Fri Nov 23 19:43:20 2007 -0500
17834 Add spaces around the = in the fdt print format.
17836 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17838 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
17839 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17840 Date: Fri Dec 7 01:25:38 2007 +0900
17842 sh: Moved driver of the SuperH dependence
17844 The composition of the directory in the drivers/ changed.
17845 I moved SuperH serial driver and marubun PCMCIA driver.
17847 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17849 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
17850 Author: Wolfgang Denk <wd@denx.de>
17851 Date: Thu Dec 6 10:21:19 2007 +0100
17855 Signed-off-by: Wolfgang Denk <wd@denx.de>
17857 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
17858 Author: Wolfgang Denk <wd@denx.de>
17859 Date: Thu Dec 6 10:21:03 2007 +0100
17861 ADS5121 Board: fix compile problem.
17863 Signed-off-by: Wolfgang Denk <wd@denx.de>
17865 commit a27044b14a9e93678a82d7b35f202b93e7687abc
17866 Author: Stefan Roese <sr@denx.de>
17867 Date: Thu Dec 6 05:58:43 2007 +0100
17869 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
17871 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
17872 setting the FIXD bit in the SDR0_MFR register. Here a description of the
17875 Problem Description
17876 ------------------------------
17877 If a DMA is performed between memory and PCI with the DMA 1 Controller
17878 using prefetch, and as a result uses a special purpose buffer selected by
17879 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
17880 the first part of the transfer sequence is performed twice. The
17881 PPC440SPe PCI Controller requests more data than was needed such that in
17882 the case of enforce memory protection, a host CPU exception can occur.
17883 No data is corrupted, because data transfer is stopped in the PCI
17884 Controller. Prefetch enable is specified by setting DMA Configuration
17885 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
17887 Behavior that may be observed in a running system
17888 ---------------------------------------------------------------------------
17890 1. DMA performance is decreased because of the double access on the PCI bus
17892 2. If an illegal access to some address on the PCI bus is detected at the
17893 system level, a machine check or similar system error may occur.
17895 Workarounds Available
17896 ----------------------------------
17898 1. Do not program prefetch. Note that a prefetch command cannot be programmed
17899 without selecting a special purpose buffer.
17900 2. To avoid crossing a physical boundary of the PCI slave device, add 512
17901 bytes of address to the PCI address range.
17903 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
17904 from AMCC and slighly changed.
17906 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
17907 Signed-off-by: Stefan Roese <sr@denx.de>
17909 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
17910 Author: Stefan Roese <sr@denx.de>
17911 Date: Tue Dec 4 16:29:48 2007 +0100
17913 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
17915 Signed-off-by: Stefan Roese <sr@denx.de>
17917 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
17918 Author: Wolfgang Denk <wd@denx.de>
17919 Date: Mon Dec 3 00:15:28 2007 +0100
17921 Prepare for 1.3.1-rc1
17923 Signed-off-by: Wolfgang Denk <wd@denx.de>
17925 commit e15e33433e7c05111968dc9b434a52fd42cbd221
17926 Author: Stefan Roese <sr@denx.de>
17927 Date: Fri Nov 30 07:15:41 2007 +0100
17929 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
17931 This manual PCIe reset triggering solves the problem seen with the
17932 Intel EPRO/1000 card, which was not detected (link not established)
17933 upon power-up reset.
17935 Signed-off-by: Stefan Roese <sr@denx.de>
17937 commit 260eea5676ca46903a335686cc020b29c4ca46fe
17938 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17939 Date: Thu Nov 29 01:21:54 2007 +0900
17941 sh: Add SuperH boards maintainer to MAINTAINERS file
17943 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
17945 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17947 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
17948 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17949 Date: Thu Nov 29 00:13:04 2007 +0900
17951 sh: Add ms7750se support in MAKEALL
17953 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17955 commit c7144373427a178332bf9754131c8c34c52c200a
17956 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17957 Date: Tue Nov 27 09:44:53 2007 +0100
17959 sh: Add sh3 and sh4 support in MAKEALL
17961 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17962 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17964 commit 130080874a3d28450098481a262c5f7c855e908d
17965 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17966 Date: Sun Nov 25 02:51:17 2007 +0900
17968 sh: Add document for SuperH.
17970 This document is a summary of information concerning SuperH of U-Boot.
17972 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17974 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
17975 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17976 Date: Sun Nov 25 02:39:31 2007 +0900
17978 sh: Add marubun's pcmcia driver
17980 Marubun pcmcia is a chip for PCMCIA used with SuperH.
17981 Of course, this can be used even by other architectures.
17982 When use this driver, came to be able to use CompactFlash
17985 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17987 commit febd86b969b975289ed948f1ac0eb9722da41ced
17988 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17989 Date: Sun Nov 25 02:32:13 2007 +0900
17991 sh: Update SuperH SCIF driver
17993 - Changed volatile unsigned to vu_.
17994 - Changed Makefile for kconfig.
17996 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17998 commit 8be760903645af09871be50ad0a6f9ebb62b311d
17999 Author: Stefan Roese <sr@denx.de>
18000 Date: Tue Nov 27 11:57:35 2007 +0100
18002 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
18004 After an error in the AMCC 405EX users manual now correctly configure
18005 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
18008 Signed-off-by: Stefan Roese <sr@denx.de>
18010 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
18011 Author: Wolfgang Denk <wd@denx.de>
18012 Date: Mon Nov 26 19:18:21 2007 +0100
18014 Cleanup coding style; update CHANGELOG
18016 Signed-off-by: Wolfgang Denk <wd@denx.de>
18018 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
18019 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18020 Date: Sun Nov 25 22:39:25 2007 +0100
18022 MAKEALL: add missing 512x boards in ppc
18024 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18026 commit a340c325e668ca7386c2276387681720be9c3757
18027 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18028 Date: Sun Nov 25 18:45:47 2007 +0100
18030 Makefile : fix tags ctags etags with new drivers organization
18032 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18034 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
18035 Author: Stefan Roese <sr@denx.de>
18036 Date: Mon Nov 26 15:06:14 2007 +0100
18038 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
18040 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
18043 Signed-off-by: Stefan Roese <sr@denx.de>
18045 commit ca1ce226287270bb01e25b8e3674c701f12edf19
18046 Author: Stefan Roese <sr@denx.de>
18047 Date: Mon Nov 26 15:01:45 2007 +0100
18049 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
18051 Signed-off-by: Stefan Roese <sr@denx.de>
18053 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
18054 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18055 Date: Sun Nov 25 18:45:47 2007 +0100
18057 Makefile : fix tags ctags etags with new drivers organization
18059 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18061 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
18062 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18063 Date: Sat Nov 24 21:26:56 2007 +0100
18065 drivers/mtd : move mtd drivers to drivers/mtd
18067 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18069 commit 318c0b90431f2648552e5ade78833f42652ce859
18070 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18071 Date: Sat Nov 24 21:17:55 2007 +0100
18073 drivers/misc : move misc drivers to drivers/misc
18075 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18077 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
18078 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18079 Date: Sat Nov 24 21:13:59 2007 +0100
18081 drivers/block : move block drivers to drivers/block
18083 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18085 commit 0c698dcaa70275eb8814f665b545547cee013892
18086 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18087 Date: Sat Nov 24 20:59:50 2007 +0100
18089 drivers/rtc : move rtc drivers to drivers/rtc
18091 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18093 commit f868cc5a50757d94f36c312395481cb0f187d9e6
18094 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18095 Date: Sat Nov 24 20:14:44 2007 +0100
18097 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
18099 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18101 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
18102 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18103 Date: Sat Nov 24 19:46:45 2007 +0100
18105 drivers/input : move input drivers to drivers/input
18107 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18109 commit e4558666293364fc3af1c1d9381ca933fa0f1275
18110 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18111 Date: Sat Nov 24 19:40:11 2007 +0100
18113 drivers/usb : move usb drivers to drivers/usb
18115 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18117 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
18118 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18119 Date: Sat Nov 24 19:33:38 2007 +0100
18121 drivers/serial : move serial drivers to drivers/serial
18123 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18125 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
18126 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18127 Date: Wed Nov 21 21:19:24 2007 +0100
18129 drivers/net : move net drivers to drivers/net
18131 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18133 commit 352d259130b349fe9593b8dada641bd78a9659e5
18134 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18135 Date: Tue Nov 20 20:41:48 2007 +0100
18137 drivers/video : move video drivers to drivers/video
18139 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18141 commit 73646217186aa17afc8e305c5f06f06dd335eaad
18142 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18143 Date: Tue Nov 20 20:33:09 2007 +0100
18145 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
18147 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18149 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
18150 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18151 Date: Tue Nov 20 20:28:09 2007 +0100
18153 drivers/pci : move pci drivers to drivers/pci
18155 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18157 commit 9162352817579840d7802da6d85872b3ca003c97
18158 Author: Gerald Van Baren <vanbaren@cideas.com>
18159 Date: Thu Nov 22 17:23:23 2007 -0500
18161 Fix fdt printing for updated libfdt
18163 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
18165 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18167 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
18168 Author: Kumar Gala <galak@kernel.crashing.org>
18169 Date: Wed Nov 21 13:30:15 2007 -0600
18171 Add additional fdt fixup helper functions
18173 Added the following fdt fixup helpers:
18174 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
18175 * do_fixup_by_compat{_u32} - Find matching nodes by compat
18177 The _u32 variants work the same only the property they are setting
18178 is know to be a 32-bit integer instead of a byte buffer.
18180 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18182 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
18183 Author: Kumar Gala <galak@kernel.crashing.org>
18184 Date: Wed Nov 21 11:11:03 2007 -0600
18186 Add fdt_fixup_ethernet helper to set mac addresses
18188 Added a fixup helper that uses aliases to set mac addresses
18189 in the device tree based on the bd_t
18191 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18193 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
18194 Author: Kumar Gala <galak@kernel.crashing.org>
18195 Date: Wed Nov 21 14:07:46 2007 -0600
18197 Fix warnings from import of libfdt
18199 cmd_fdt.c: In function fdt_print:
18200 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
18201 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
18202 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
18203 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
18205 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18207 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
18208 Author: Kumar Gala <galak@kernel.crashing.org>
18209 Date: Wed Oct 24 11:04:22 2007 -0500
18211 Update libfdt from device tree compiler (dtc)
18213 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
18214 the device tree compiler (dtc) project.
18216 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18218 commit e93becf80d732b64aef81b23e8b6ece02c40533d
18219 Author: Kumar Gala <galak@kernel.crashing.org>
18220 Date: Sat Nov 3 19:46:28 2007 -0500
18222 Move do_fixup* for libfdt into common code
18224 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
18225 into common/fdt_support.c and renamed:
18227 do_fixup() -> do_fixup_by_path()
18228 do_fixup_u32() -> do_fixup_by_path_u32()
18230 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18232 commit f738b4a75998f42a7408defadc9baac7a31c92db
18233 Author: Kumar Gala <galak@kernel.crashing.org>
18234 Date: Thu Oct 25 16:15:07 2007 -0500
18236 Make no options to fdt print default to '/'
18238 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18240 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
18241 Author: Kumar Gala <galak@kernel.crashing.org>
18242 Date: Wed Oct 24 10:21:57 2007 -0500
18244 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
18247 fdt_node_is_compatible
18248 fdt_find_node_by_type
18249 fdt_find_compatible_node
18251 To ease merge of newer libfdt as we aren't using them anywhere at this time.
18253 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
18256 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18258 commit 98e2867cc85409b919f862e6c16026461ec955df
18259 Author: Grant Likely <grant.likely@secretlab.ca>
18260 Date: Wed Nov 21 09:19:37 2007 -0700
18262 [BUILD] Remove libraries when updating autoconf.mk
18264 Fix library problems caused by conditional compilation. Using
18265 autoconf.mk to decide which files to compile has caused a problem when
18266 changing configuration from one board to another without clearing out
18267 the library (*.a) files.
18269 It used to be that the linker was always passed the same list of .o
18270 files when building the .a files. However, that is not longer true
18271 with conditional compilation. Now, a different board config will have
18272 a different file list passed to the linker. The problem occurs when
18273 a library has already been built and the board config is changed.
18275 Since the linker will update instead of replace a preexisting library,
18276 then if the file list changes to remove some object files the old
18277 objects will still exist in the library.
18279 The solution is to remove all old library files when autoconf.mk is
18282 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18284 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
18285 Author: Kumar Gala <galak@kernel.crashing.org>
18286 Date: Wed Nov 21 08:49:50 2007 -0600
18288 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
18290 Modify libfdt/Makefile to conditionally compile the *.c files based
18291 on the board config.
18293 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18295 commit 4a43719a7738712811d822ca8125427b27a55cdc
18296 Author: Grant Likely <grant.likely@secretlab.ca>
18297 Date: Mon Sep 24 09:05:31 2007 -0600
18299 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
18301 Modify common/Makefile to conditionally compile the cmd_*.c files based
18302 on the board config.
18304 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18306 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
18307 Author: Grant Likely <grant.likely@secretlab.ca>
18308 Date: Mon Sep 24 09:05:31 2007 -0600
18310 [BUILD] Generate include/autoconf.mk from board config files
18312 Use cpp and sed to postprocess config.h and import the defined values
18313 into include/autoconf.mk. autoconf.mk is then included by config.mk to
18314 give 'make' access to the board configuration.
18316 Doing this enables conditional compilation at the Makefile level instead
18317 of by wrapping every .c file with #ifdef/#endif wrappers.
18319 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18321 commit 68b88999da87ab88e71e1306192905be3450198e
18322 Author: Jon Loeliger <jdl@freescale.com>
18323 Date: Tue Nov 20 15:02:26 2007 -0600
18325 8610HPCD: Enable the 8610 Display Interface Unit
18327 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18329 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
18330 Author: Jon Loeliger <jdl@freescale.com>
18331 Date: Tue Nov 20 15:00:53 2007 -0600
18333 Move 8610 DIU interface structure definitions to header file.
18335 These two structures are still needed during the
18336 initialization and setup of the DIU hardware.
18337 So move them to the fsl_diu_fb.h file for now.
18340 Noticed-by: York Sun <yorksun@freescale.com>
18341 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18343 commit 080c646dbf474a109c3f85718fb01ce042a38c45
18344 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18345 Date: Tue Nov 20 20:14:18 2007 +0100
18347 drivers/i2c : move i2c drivers to drivers/i2c
18349 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18351 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
18352 Author: Wolfgang Denk <wd@denx.de>
18353 Date: Mon Nov 19 22:20:24 2007 +0100
18355 Prepare for 1.3.0 release.
18357 Signed-off-by: Wolfgang Denk <wd@denx.de>
18359 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
18360 Author: Haiying Wang <Haiying.Wang@freescale.com>
18361 Date: Mon Nov 19 10:02:13 2007 -0500
18363 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
18365 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
18367 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
18369 commit f8c320609366176b31104d9bf5e295232e1c7f1d
18370 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
18371 Date: Mon Nov 19 11:14:16 2007 +0900
18373 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
18375 lowlevel_init.S: Assembler messages:
18376 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
18378 Looking at codes, the `memtest' and `clearmem' are intentional mixed
18379 use of `global symbols' and `label' for debugging purpose. To make it
18380 build, just disable global-symbols-use for now. As a result `memtest'
18381 still remains as unused, but leave it be...
18383 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
18385 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
18386 Author: Wolfgang Denk <wd@denx.de>
18387 Date: Mon Nov 19 12:59:14 2007 +0100
18389 Fix build problems with mp2usb board
18391 Signed-off-by: Wolfgang Denk <wd@denx.de>
18393 commit 6bf4c686afca1e86e1c384d59218f914605713bf
18394 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18395 Date: Sun Nov 18 18:36:11 2007 +0100
18397 s3c24x0: Fix usb_ohci.c missing in Makefile
18398 and usb_ohci.c warning differ in signedness
18400 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18402 commit 6073f61e078da5ddb521b56256bcc36508589883
18403 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18404 Date: Sun Nov 18 12:55:02 2007 +0100
18406 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
18408 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18410 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
18411 Author: Wolfgang Denk <wd@denx.de>
18412 Date: Sun Nov 18 17:11:09 2007 +0100
18414 Fix compiler warnings for ARM systems.
18416 Signed-off-by: Wolfgang Denk <wd@denx.de>
18418 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
18419 Author: Wolfgang Denk <wd@denx.de>
18420 Date: Sun Nov 18 16:36:27 2007 +0100
18422 Fix compiler warnings for PPC systems. Update CHANGELOG.
18424 Signed-off-by: Wolfgang Denk <wd@denx.de>
18426 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
18427 Author: Stefan Roese <sr@denx.de>
18428 Date: Sun Nov 18 14:44:44 2007 +0100
18430 ppc4xx: Correct 405EX PCIe UTL register mapping
18432 Map 4k mem space for UTL registers for each port.
18434 Signed-off-by: Stefan Roese <sr@denx.de>
18436 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
18437 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18438 Date: Sat Nov 17 11:31:10 2007 +0100
18440 Fix warning differ in signedness in net/net.c and net/nfs.c
18442 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
18443 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18444 Date: Sat Nov 17 20:42:45 2007 +0900
18446 gth2.c: Fix a warning on gth2 build.
18448 gth2.c: In function 'misc_init_r':
18449 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
18451 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18453 commit 2309c130aa4c84b91bd874a41269c923eb61b555
18454 Author: Stefan Roese <sr@denx.de>
18455 Date: Sat Nov 17 07:58:25 2007 +0100
18457 Fix warning differ in signedness in common/cmd_scsi.c
18459 Signed-off-by: Stefan Roese <sr@denx.de>
18461 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
18462 Author: Stefan Roese <sr@denx.de>
18463 Date: Sat Nov 17 14:52:29 2007 +0100
18465 ppc4xx: Update AMCC Kilauea config file
18467 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
18469 Signed-off-by: Stefan Roese <sr@denx.de>
18471 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
18472 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18473 Date: Sat Nov 17 20:05:26 2007 +0900
18475 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
18477 Current trick to pick up GNU assembler minor version does not work with the
18478 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
18481 $ sde-as --version |grep "GNU assembler"
18482 GNU assembler 2.15.94 mipssde-6.02.02-20050602
18483 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
18485 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
18489 $ mips-linux-as --version |grep "GNU assembler"
18490 GNU assembler (GNU Binutils) 2.18
18491 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
18493 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
18497 As a result of above, you'll see many noises with such binutils:
18500 /bin/sh: line 0: [: : integer expression expected
18501 /bin/sh: line 0: [: : integer expression expected
18502 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
18503 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
18504 /bin/sh: line 0: [: : integer expression expected
18505 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
18506 /bin/sh: line 0: [: : integer expression expected
18507 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
18508 /bin/sh: line 0: [: : integer expression expected
18510 This patch simplifies the trick and makes it work with both versions of gas.
18511 I also replace an expensive `awk (or gawk)' with `cut'.
18513 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18515 commit 16664f72850846e645616da1c0fa5afcd6d15f15
18516 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18517 Date: Sat Nov 17 20:05:26 2007 +0900
18519 [MIPS] Remove useless instructions for initializing $gp.
18521 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18523 commit 03c031d5660ea946c39af6e2e16267da857c609f
18524 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18525 Date: Sat Oct 27 15:27:06 2007 +0900
18527 [MIPS] MIPS 4K core: Coding style cleanups
18529 No logical changes.
18531 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18533 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
18534 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18535 Date: Sat Nov 17 20:05:20 2007 +0900
18537 [MIPS] gth2.c: Fix a warning on gth2 build.
18539 gth2.c: In function 'misc_init_r':
18540 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
18542 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18544 commit 4fbd0741b2b6441da10be93e10267122581b7079
18545 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18546 Date: Sat Oct 27 15:22:33 2007 +0900
18548 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
18550 au1x00_eth.c: In function 'au1x00_miiphy_write':
18551 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
18553 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18555 commit f01320459736f156707425cf8112f98606301aa4
18556 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18557 Date: Sat Oct 27 15:00:25 2007 +0900
18559 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
18561 au1x00_eth.c: In function 'au1x00_enet_initialize':
18562 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
18563 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
18564 au1x00_eth.c:246: error: for each function it appears in.)
18565 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
18566 au1x00_eth.c: In function 'au1x00_miiphy_write':
18567 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
18568 make[1]: *** [au1x00_eth.o] Error 1
18570 Fixed by moving these two functions forward.
18572 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18574 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
18575 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18576 Date: Sat Oct 27 15:00:25 2007 +0900
18578 MAKEALL: Added missing pb1000 board
18580 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18582 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
18583 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18584 Date: Sat Oct 27 15:00:24 2007 +0900
18586 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
18588 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18590 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
18591 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18592 Date: Sat Oct 27 15:00:24 2007 +0900
18594 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
18596 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18598 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
18599 Author: Wolfgang Denk <wd@denx.de>
18600 Date: Sat Nov 17 02:34:38 2007 +0100
18602 Update CHANGELOIG, prepare for -rc4
18604 Signed-off-by: Wolfgang Denk <wd@denx.de>
18606 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
18607 Author: Luotao Fu <l.fu@pengutronix.de>
18608 Date: Wed Nov 14 18:58:33 2007 +0100
18610 Fix the i2c frequency and default address in rsdproto board
18612 rsdproto board support has wrong I2C frequency and wrong return value
18615 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
18617 commit 429c180edad038f91c989cb14b478228092e7054
18618 Author: Wolfgang Denk <wd@denx.de>
18619 Date: Sat Nov 17 01:45:38 2007 +0100
18621 powerpc: Backout relocation changes for MPC5121, too.
18623 Apply Grant Likely's backout to MPC5121 code, too.
18625 Pointed out by Rafal Jaworowski <raj@semihalf.com>
18627 Signed-off-by: Wolfgang Denk <wd@denx.de>
18629 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
18630 Author: Grant Likely <grant.likely@secretlab.ca>
18631 Date: Tue Nov 13 22:18:33 2007 -0700
18633 powerpc: Backout relocation changes.
18635 Ugh. I *hate* to back this change out, but these compiler flags don't
18636 work for relocation on all versions of GCC. I've not been able to
18637 reproduce the environment in my setup (and hence, not been able to
18638 find a combination that *does* work), so I've got no choice but to go
18639 back to the old gcc flags and linker script.
18641 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18643 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
18644 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18645 Date: Tue Nov 13 09:11:05 2007 +0100
18647 Fixed mips_io_port_base build errors.
18649 This patch has been sent on:
18652 Although mips_io_port_base is currently a part of IDE command, it is quite
18653 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
18654 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
18656 This patch is triggered by multiple definition of `mips_io_port_base' build
18657 error on gth2 (and tb0229 also needs this fix.)
18659 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
18660 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
18661 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
18662 make: *** [u-boot] Error 1
18664 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18665 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18667 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
18668 Author: Wolfgang Denk <wd@denx.de>
18669 Date: Sat Nov 17 01:30:40 2007 +0100
18671 Fix a bug in the slave serial programming mode for the Xilinx
18672 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
18673 the most significant bit was set, which did not work on any
18674 architecture where "char" defaulted to be an unsigned type.
18676 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
18678 Signed-off-by: Wolfgang Denk <wd@denx.de>
18680 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
18681 Author: Jon Loeliger <jdl@freescale.com>
18682 Date: Thu Nov 1 12:23:29 2007 -0500
18684 86xx: Fix broken variable reference when #def DEBUGing.
18686 Sometimes you can't reference the DDR2 controller variables.
18688 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18690 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
18691 Author: Jason Jin <Jason.jin@freescale.com>
18692 Date: Fri Oct 26 18:32:00 2007 +0800
18694 make 8610 board use pixis reset
18696 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
18698 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
18699 Author: Jason Jin <Jason.jin@freescale.com>
18700 Date: Mon Oct 29 19:26:21 2007 +0800
18702 Unify pixis_reset altbank across board families
18704 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
18705 into the separate board config files.
18707 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
18708 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18710 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
18711 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18712 Date: Wed Nov 7 08:19:21 2007 +0100
18714 Fix warning: pointer targets in assignment differ in signedness
18716 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18718 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
18719 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18720 Date: Wed Nov 7 08:19:19 2007 +0100
18722 Fix warning differ in signedness in common/cmd_ide.c
18724 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18726 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
18727 Author: Stefan Roese <sr@denx.de>
18728 Date: Fri Nov 16 14:16:54 2007 +0100
18730 ppc4xx: Enable 405EX PCIe UTL register configuration
18732 Till now the UTL registers on 405EX were not initialized but left with
18733 their default values. This patch new initializes some of the UTL
18734 registers on 405EX.
18736 Signed-off-by: Stefan Roese <sr@denx.de>
18738 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
18739 Author: Stefan Roese <sr@denx.de>
18740 Date: Fri Nov 16 14:00:59 2007 +0100
18742 ppc4xx: Update AMCC Makalu for board rev 1.1
18744 This patch adds changes needed for Makalu rev 1.1:
18746 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
18747 - Enable 2nd ethernet port EMAC1
18748 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
18749 - Reset PCIe ports via GPIO upon bootup
18751 Signed-off-by: Stefan Roese <sr@denx.de>
18753 commit 4d4faae65e115e327425cd514c1a35146a85166b
18754 Author: Grant Likely <grant.likely@secretlab.ca>
18755 Date: Mon Sep 24 09:05:31 2007 -0600
18757 Group PCI and PCMCIA drivers in drivers/Makefile
18759 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18761 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
18762 Author: Grant Likely <grant.likely@secretlab.ca>
18763 Date: Mon Sep 24 09:05:31 2007 -0600
18765 Group block/flash drivers in drivers/Makefile
18767 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18769 commit df58c81551700f058b44cacf55a7997fa63bfe0a
18770 Author: Grant Likely <grant.likely@secretlab.ca>
18771 Date: Mon Sep 24 09:05:31 2007 -0600
18773 Group USB drivers in drivers/Makefile
18775 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18777 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
18778 Author: Grant Likely <grant.likely@secretlab.ca>
18779 Date: Mon Sep 24 09:05:30 2007 -0600
18781 Group i2c drivers in drivers/Makefile
18783 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18785 commit ec00c76de0e5971273905998d62d6bb119324218
18786 Author: Grant Likely <grant.likely@secretlab.ca>
18787 Date: Mon Sep 24 09:05:30 2007 -0600
18789 Group console drivers in drivers/Makefile
18791 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18793 commit 754f230aa01b8c789fc31f8013c2487954073300
18794 Author: Grant Likely <grant.likely@secretlab.ca>
18795 Date: Mon Sep 24 09:05:30 2007 -0600
18797 Group network drivers in drivers/Makefile
18799 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18801 commit f0037c56b0d12cd46215124667b9f83d60ef9391
18802 Author: Grant Likely <grant.likely@secretlab.ca>
18803 Date: Mon Sep 24 09:05:30 2007 -0600
18805 Build: split COBJS value into multiple lines
18807 This change is in preparation for condtitionial compile support in the
18808 build system. By spliting them all into seperate lines now, subsequent
18809 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
18810 be less invasive and easier to review
18812 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18814 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
18815 Author: Grant Likely <grant.likely@secretlab.ca>
18816 Date: Mon Sep 24 09:05:30 2007 -0600
18818 Add .gitignore files
18820 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18821 Acked-by: Kim Phillips <kim.phillips@freescale.com>
18823 commit 955413f35f054a82e40042f1dbcf501c6a05719b
18824 Author: Grant Likely <grant.likely@secretlab.ca>
18825 Date: Thu Nov 15 08:27:52 2007 -0700
18827 Revert "Correct relocation fixup for mpc5xx"
18829 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
18830 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18832 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
18833 Author: Grant Likely <grant.likely@secretlab.ca>
18834 Date: Thu Nov 15 08:24:32 2007 -0700
18836 Revert "Correct fixup relocation for MPC5xxx"
18838 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
18839 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18841 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
18842 Author: Grant Likely <grant.likely@secretlab.ca>
18843 Date: Thu Nov 15 08:21:04 2007 -0700
18845 Revert "Correct fixup relocation for mpc8220"
18847 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
18848 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18850 commit 70922342369e5e39b286fe21e768a239ca07a514
18851 Author: Grant Likely <grant.likely@secretlab.ca>
18852 Date: Thu Nov 15 08:20:57 2007 -0700
18854 Revert "Correct fixup relocation for mpc824x"
18856 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
18857 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18859 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
18860 Author: Grant Likely <grant.likely@secretlab.ca>
18861 Date: Thu Nov 15 08:20:50 2007 -0700
18863 Revert "Correct fixup relocation for mpc8260"
18865 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
18866 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18868 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
18869 Author: Grant Likely <grant.likely@secretlab.ca>
18870 Date: Thu Nov 15 08:20:43 2007 -0700
18872 Revert "Correct fixup relocation for mpc83xx"
18874 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
18875 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18877 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
18878 Author: Grant Likely <grant.likely@secretlab.ca>
18879 Date: Thu Nov 15 08:20:25 2007 -0700
18881 Revert "[MPC512x] Correct fixup relocation"
18883 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
18884 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
18886 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
18887 Author: Stefan Roese <sr@denx.de>
18888 Date: Thu Nov 15 14:25:09 2007 +0100
18890 ppc4xx: Small AMCC Kilauea cleanup
18892 Remove not needed pci_target_init() function.
18894 Signed-off-by: Stefan Roese <sr@denx.de>
18896 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
18897 Author: Stefan Roese <sr@denx.de>
18898 Date: Thu Nov 15 14:23:55 2007 +0100
18900 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
18902 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
18903 - Cleanup of the 4xx GPIO functions
18904 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
18906 Signed-off-by: Stefan Roese <sr@denx.de>
18908 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
18909 Author: Stefan Roese <sr@denx.de>
18910 Date: Thu Nov 15 14:20:08 2007 +0100
18912 ppc4xx: AMCC Taihu board config file cleanup
18914 This patch makes the AMCC Taihu a little more compatible to the other
18917 Signed-off-by: Stefan Roese <sr@denx.de>
18919 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
18920 Author: Marian Balakowicz <m8@semihalf.com>
18921 Date: Thu Nov 15 13:37:28 2007 +0100
18923 [INKA4x0] NG hardware: flash support
18925 Disabled and remove inka4x0 custom flash driver, use CFI flash
18928 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
18930 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
18931 Author: Marian Balakowicz <m8@semihalf.com>
18932 Date: Thu Nov 15 13:29:55 2007 +0100
18934 [INKA4x0] NG hardware: SDRAM support
18936 Add support for three new DDR chips that may be present on a NG
18937 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
18939 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
18941 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
18943 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
18944 Author: Marian Balakowicz <m8@semihalf.com>
18945 Date: Thu Nov 15 13:24:43 2007 +0100
18947 [INKA4x0] NG hardware: platform code update
18949 - Cleanup compile warnings.
18950 - Add missing '\0' in default environment.
18951 - Increase CFG_MONITOR_LEN to 256 KiB.
18952 - Add required CFG_USE_PPCENV.
18954 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
18956 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
18957 Author: Peter Pearse <peter.pearse@arm.com>
18958 Date: Thu Nov 15 08:58:00 2007 +0000
18960 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
18961 Remove warnings re onenand_read() & write()
18963 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
18964 Author: Peter Pearse <peter.pearse@arm.com>
18965 Date: Thu Nov 15 08:45:13 2007 +0000
18969 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
18970 Author: Roy Zang <tie-fei.zang@freescale.com>
18971 Date: Thu Sep 13 18:52:28 2007 +0800
18973 Enable ULi1575 Ethernet support in 8610HPCD config
18975 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
18976 Acked-by: Jon Loeliger <jdl@freescale.com>
18978 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
18979 Author: Stefan Roese <sr@denx.de>
18980 Date: Tue Nov 13 08:18:20 2007 +0100
18982 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
18984 Signed-off-by: Stefan Roese <sr@denx.de>
18986 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
18987 Author: Stefan Roese <sr@denx.de>
18988 Date: Tue Nov 13 08:06:11 2007 +0100
18990 ppc4xx: Fix 405EX PCIe UTLSET register setup
18992 Signed-off-by: Stefan Roese <sr@denx.de>
18994 commit 1ce55151c85d068f70317a8d65c61058b891afb4
18995 Author: Heiko Schocher <hs@denx.de>
18996 Date: Tue Nov 13 07:50:29 2007 +0100
18998 [UC101] SRAM now with 2 MB working.
19000 Signed-off-by: Heiko Schocher <hs@denx.de>
19002 commit 2d14684341109a69616e4d6016cd61402d55086f
19003 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19004 Date: Fri Nov 9 15:37:53 2007 +0100
19006 ppc4xx: Use generic usb-ohci driver for sequoia board
19008 This patch makes the sequoia board use the generic usb-ohci driver
19009 instead of cpu/ppc4xx/usb_ohci.c.
19011 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19012 Signed-off-by: Stefan Roese <sr@denx.de>
19014 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
19015 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19016 Date: Fri Nov 9 15:37:23 2007 +0100
19018 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
19020 This patch disables the 44x d-cache on 'usb start' and
19021 reenables it on 'usb stop'. This should be seen as a
19022 temporary fix until the generic usb-ohci driver can
19023 life with d-cache enabled.
19025 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19026 Signed-off-by: Stefan Roese <sr@denx.de>
19028 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
19029 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19030 Date: Fri Nov 9 15:36:44 2007 +0100
19032 ppc4xx: Remove redundant code from 4xx network driver
19034 This patch removes some redundant code and decrements the end
19035 address of cache flush and invalidate by 1.
19037 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
19038 Signed-off-by: Stefan Roese <sr@denx.de>
19040 commit 5ca9881aad8c413ac2a82868a5e3719178254502
19041 Author: Peter Pearse <peter.pearse@arm.com>
19042 Date: Fri Nov 9 15:24:26 2007 +0000
19044 Add apollon board support
19045 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
19047 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
19048 Author: Stefan Roese <sr@denx.de>
19049 Date: Fri Nov 9 12:19:58 2007 +0100
19051 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
19053 Signed-off-by: Stefan Roese <sr@denx.de>
19055 commit c7f69c340277935a6c19a956421852da944a365f
19056 Author: Stefan Roese <sr@denx.de>
19057 Date: Fri Nov 9 12:18:54 2007 +0100
19059 ppc4xx: Make output a little shorter on I2C bootrom detection
19061 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
19062 already print a line with the information which I2C bootrom is
19063 used for bootstrap configuration. So we don't need this extra line
19064 with "I2C boot EEPROM en-/dis-abled".
19066 This patch also has a little code cleanup integrated.
19068 Signed-off-by: Stefan Roese <sr@denx.de>
19070 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
19071 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19072 Date: Thu Nov 8 12:50:18 2007 -0600
19074 ColdFire: MCF5329 - Remove reset registers from CCM
19076 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19078 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
19079 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19080 Date: Thu Nov 8 12:31:11 2007 -0600
19082 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
19084 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19086 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
19087 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19088 Date: Thu Nov 8 12:19:01 2007 -0600
19090 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
19092 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19094 commit 225a24b5e062ad94627424508ae814f51dbe1a34
19095 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19096 Date: Wed Nov 7 18:00:54 2007 -0600
19098 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
19100 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19102 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
19103 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19104 Date: Wed Nov 7 17:56:15 2007 -0600
19106 ColdFire: MCF532x - Update do_reset() using core reset
19108 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19110 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
19111 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19112 Date: Wed Nov 7 17:51:00 2007 -0600
19114 ColdFire: Update cpu flag for 4.2-xx compiler
19116 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
19118 commit 070ba56115b4da63b46e974287fa4550d4023386
19119 Author: York Sun <yorksun@freescale.com>
19120 Date: Wed Oct 31 14:59:04 2007 -0500
19122 8610: Add console frame buffer support to FSL 8610 DIU driver.
19124 Add cfb console support to FSL 8610 DIU driver.
19125 Inspect board version from PIXIS to obtain correct pixel format.
19127 Use #define CONFIG_VIDEO in config file to enable fb console.
19129 To switch monitor, set monitor variable to
19130 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
19131 followed by "diufb init".
19133 Preserve logo bitmap at the top of the fb console.
19135 Signed-off-by: York Sun <yorksun@freescale.com>
19136 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19138 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
19139 Author: York Sun <yorksun@freescale.com>
19140 Date: Mon Oct 29 13:58:39 2007 -0500
19142 8610: Add 8610 DIU display driver
19144 1280x1024 and 1024x768 @ 32 bpp are supported now.
19145 DVI, Single-link LVDS, Double-link LVDS are all supported.
19147 Environmental variable "monitor" is used to specify monitor port.
19149 A new command "diufb" is introduced to reinitialize monitor
19150 and display a BMP file in the memory. So far, 1-bit, 4-bit,
19151 8-bit and 24-bit BMP formats are supported.
19154 - initialize the diu driver
19155 Enable the port specified in the environmental variable "monitor"
19158 - display bmp file in memory.
19159 The bmp image should be no bigger than the resolution, 1280x1024
19160 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
19162 Note, this driver allocate memory but doesn't free it after use
19163 It is written on purpose -- to avoid a failure of reallocation
19164 due to memory fragement.
19166 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
19168 Signed-off-by: York Sun <yorksun@freescale.com>
19169 Signed-off-by: Jon loeliger <jdl@freescale.com>
19171 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
19172 Author: York Sun <yorksun@freescale.com>
19173 Date: Wed Oct 31 10:43:59 2007 -0500
19175 FSL: Add a freescale bitmap logo.
19177 This Freescale logo is a 340 x 128 x 4bpp BMP file
19178 that can be displayed by the DIU Framebuffer driver.
19180 Signed-off-by: York Sun <yorksun@freescale.com>
19181 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19183 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
19184 Author: York Sun <yorksun@freescale.com>
19185 Date: Mon Oct 29 13:57:53 2007 -0500
19187 8610: Make some extra debug environment variables conditional.
19189 One may #define ENV_DEBUG to get them back again.
19191 Signed-off-by: York Sun <yorksun@freescale.com>
19193 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
19194 Author: Jason Jin <Jason.jin@freescale.com>
19195 Date: Mon Oct 29 19:26:21 2007 +0800
19197 8610: Actually enable pixis_reset CONFIGs
19199 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19201 commit f3bceaab230b4748d0afc4109b6837308f018b40
19202 Author: Jason Jin <Jason.jin@freescale.com>
19203 Date: Fri Oct 26 18:31:59 2007 +0800
19205 Fix the BAT definition of PCI IO on 8610 board
19207 The address in the BAT register is aligned with the BAT size.
19208 The original definition actually did not define BAT for PCIE2 IO.
19209 This patch fix this.
19211 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19213 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
19214 Author: Jason Jin <Jason.jin@freescale.com>
19215 Date: Mon Oct 29 19:26:21 2007 +0800
19217 Unify pixis_reset altbank across board families
19219 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
19220 into the separate board config files.
19222 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19223 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19225 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
19226 Author: Jason Jin <Jason.jin@freescale.com>
19227 Date: Fri Oct 26 18:32:00 2007 +0800
19229 make 8610 board use pixis reset
19231 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19233 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
19234 Author: Jon Loeliger <jdl@freescale.com>
19235 Date: Thu Nov 1 12:23:29 2007 -0500
19237 86xx: Fix broken variable reference when #def DEBUGing.
19239 Sometimes you can't reference the DDR2 controller variables.
19241 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19243 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
19244 Author: Roy Zang <tie-fei.zang@freescale.com>
19245 Date: Mon Nov 5 17:39:24 2007 +0800
19247 Implement general ULi 526x Ethernet driver support in U-boot
19249 This patch implements general ULi 526x Ethernet driver.
19250 Until now, it is the only native Ethernet port on
19251 MPC8610HPCD board, but it could be used on other boards
19252 with ULi 526x Ethernet port as well.
19254 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
19255 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
19256 Acked-by: Jon Loeliger <jdl@freescale.com>
19257 Signed-off-by: Ben Warren <bwarren@qstreams.com>
19259 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
19260 Author: Larry Johnson <lrj@arlinx.com>
19261 Date: Thu Nov 1 08:46:50 2007 -0500
19263 NET: Add Ethernet 1000BASE-X support for PPC4xx
19265 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
19266 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
19267 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
19268 "mii info" command is modified to distinguish between 1000BASE-T and -X.
19270 Signed-off-by: Larry Johnson <lrj@acm.org>
19271 Signed-off-by: Ben Warren <bwarren@qstreams.com>
19273 commit 298035df4948b113d29ac0e694717d34b95bc5dc
19274 Author: Larry Johnson <lrj@arlinx.com>
19275 Date: Wed Oct 31 11:21:29 2007 -0500
19277 NET: Cosmetic changes
19279 Signed-off-by: Larry Johnson <lrj@acm.org>
19280 Signed-off-by: Ben Warren <bwarren@qstreams.com>
19282 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
19283 Author: Stefan Roese <sr@denx.de>
19284 Date: Mon Nov 5 07:43:05 2007 +0100
19286 ppc4xx: Make output a little shorter on PCIe detection
19288 Now not max 3 lines but 2 lines are printed per PCIe port.
19290 Signed-off-by: Stefan Roese <sr@denx.de>
19292 commit 992742a5b09d9040adbd156fb90756af66ade310
19293 Author: Wolfgang Denk <wd@denx.de>
19294 Date: Sat Nov 3 23:09:27 2007 +0100
19296 Cleanup coding style; update CHANGELOG
19298 Signed-off-by: Wolfgang Denk <wd@denx.de>
19300 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
19301 Author: Bruce Adler <bruce.adler@ccpu.com>
19302 Date: Fri Nov 2 13:15:42 2007 -0700
19304 fix wording in README
19306 Changed the wording to properly describe the shadowing
19307 of the environment from ROM to RAM
19309 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
19311 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
19312 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
19313 Date: Wed Oct 31 02:18:15 2007 +0900
19315 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
19317 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
19319 commit ec22755799466c8a103664bb3a5e647bf9c238f4
19320 Author: Vlad Lungu <vlad@comsys.ro>
19321 Date: Thu Oct 25 16:08:14 2007 +0300
19323 Trimmed some variables in ne2000.c
19325 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
19327 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
19328 Author: Zhang Wei <wei.zhang@freescale.com>
19329 Date: Thu Oct 25 17:51:27 2007 +0800
19331 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
19333 The scan code of the key 'z' is 0x1d, which should be handled.
19335 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
19338 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
19340 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
19341 Author: Zhang Wei <wei.zhang@freescale.com>
19342 Date: Thu Oct 25 17:30:04 2007 +0800
19344 Fix USB support issue for MPC8641HPCN board.
19346 The configuration file has already enabled USB, but it
19347 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
19348 on MPC8641HPCN can not work because of the wrong USB
19351 And add the USB command to U-Boot commands list.
19353 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
19355 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
19356 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19357 Date: Wed Oct 24 18:16:01 2007 +0200
19359 Use config_cmd_default.h instead of config_cmd_all.h
19361 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19363 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
19364 Author: Marian Balakowicz <m8@semihalf.com>
19365 Date: Wed Oct 24 01:37:36 2007 +0200
19367 TQM5200: Call usb_cpu_init() during board init
19369 usb_cpu_init() configures GPS USB pins, clocks, etc. and
19370 is required for proper operation of kernel USB subsystem.
19371 This setup was previously done in the kernel by the fixup
19372 code which is being removed, thus low level init must be
19373 done by U-boot now.
19375 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19377 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
19378 Author: Guennadi Liakhovetski <lg@denx.de>
19379 Date: Tue Oct 23 16:25:50 2007 +0200
19383 An obvious typo. Originally fixed in linkstation u-boot port.
19385 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19387 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
19388 Author: Guennadi Liakhovetski <lg@denx.de>
19389 Date: Tue Oct 23 14:35:05 2007 +0200
19391 Fix a typo in cpu/mpc824x/interrupts.c
19393 Since December 2003 the timer_interrupt_cpu() function in
19394 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
19395 parameter. Remove it.
19397 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19399 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
19400 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
19401 Date: Wed Oct 17 11:13:51 2007 +0200
19403 add ft_cpu_setup(..) on mpc8260
19405 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
19406 based on code from mpc5xxx
19408 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
19411 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
19412 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
19413 Date: Wed Oct 17 11:18:42 2007 +0200
19415 changes for IDS8247 board support
19417 To get the IDS8247 board working following are done:
19418 - FCC2 is deactivated
19419 - FCC1 is activated
19421 - CFI driver is activated
19422 - Adapted for use with LIBFDT
19424 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
19427 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
19428 Author: Stefan Roese <sr@denx.de>
19429 Date: Sat Nov 3 12:08:28 2007 +0100
19431 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
19433 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
19434 Again, only one image supports both targets.
19436 Signed-off-by: Stefan Roese <sr@denx.de>
19438 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
19439 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
19440 Date: Wed Oct 24 15:48:37 2007 +0200
19442 ATSTK1002: Remove default ethernet addresses
19444 Wolfgang is right: It's not a good idea to set up default initial
19445 ethernet addresses for a board, even though they belong to the local
19448 This will change the failure mode from "IT manager screams at you for
19449 using duplicate ethernet addresses" to a nice error message explaining
19450 that the ethernet address hasn't been set properly.
19452 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
19454 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
19455 Author: Justin Flammia <jflammia@savantav.com>
19456 Date: Mon Oct 29 17:40:35 2007 -0400
19460 This is a multi-part message in MIME format.
19462 commit e6e505eae94ed721e123e177489291fc4544b7b8
19463 Author: Justin Flammia <jflammia@savantav.com>
19464 Date: Mon Oct 29 17:19:03 2007 -0400
19466 Found a bug in the way the DHCP Request packet is built, where the IP address
19467 that is offered by the server is bound to prematurely. This patch is a fix of
19468 that bug where the IP address offered by the DHCP server is not used until
19469 after the DHCP ACK from the server is received.
19471 Signed-off-by: Justin Flammia <jflammia@savantav.com>
19472 Signed-off-by: Ben Warren <bwarren@qstreams.com>
19474 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
19475 Author: Stefan Roese <sr@denx.de>
19476 Date: Wed Oct 31 20:58:34 2007 +0100
19478 ppc4xx: Fix acadia_nand build problem
19480 Since the cache handling functions were moved from start.S into cache.S
19481 the acadia NAND booting Makfile needs to be adapted accordingly.
19483 Signed-off-by: Stefan Roese <sr@denx.de>
19485 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
19486 Author: Stefan Roese <sr@denx.de>
19487 Date: Wed Oct 31 20:57:11 2007 +0100
19489 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
19491 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
19492 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
19493 boards by defining CONFIG_4xx_DCACHE in the board config file. This
19494 option will disappear, when more boards use is successfully and no
19495 more known problems exist.
19497 This is tested successfully on Sequoia and Katmai. The only problem that
19498 needs to be fixed is, that USB is not working on Sequoia right now, since
19499 it will need some cache handling code too, similar to the 4xx EMAC driver.
19501 Signed-off-by: Stefan Roese <sr@denx.de>
19503 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
19504 Author: Stefan Roese <sr@denx.de>
19505 Date: Wed Oct 31 20:51:10 2007 +0100
19507 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
19509 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
19510 disable the cache for the CPU POST tests, since these tests consist
19511 of self modifying code. This is done via the new change_tlb() function.
19513 Signed-off-by: Stefan Roese <sr@denx.de>
19515 commit f71b2888b4b3c870909a0341427b2a914246f81f
19516 Author: Stefan Roese <sr@denx.de>
19517 Date: Wed Oct 31 20:47:26 2007 +0100
19519 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
19521 This patch enables the 4xx EMAC POST driver to work too, when dcache is
19524 Signed-off-by: Stefan Roese <sr@denx.de>
19526 commit a2685904061b35a17583d65fe47cdc2686a69eaa
19527 Author: Stefan Roese <sr@denx.de>
19528 Date: Wed Oct 31 20:45:53 2007 +0100
19530 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
19532 Signed-off-by: Stefan Roese <sr@denx.de>
19534 commit ff768cb168d8157c24a25016dbfbeb465e47f420
19535 Author: Stefan Roese <sr@denx.de>
19536 Date: Wed Oct 31 18:01:24 2007 +0100
19538 ppc4xx: Change 4xx ethernet driver to handle cached memory too
19540 This patch enables the 4xx EMAC driver to work too, when dcache is
19543 Signed-off-by: Stefan Roese <sr@denx.de>
19545 commit 483e09a223c666269ef81d3573a6591b1046b0ef
19546 Author: Stefan Roese <sr@denx.de>
19547 Date: Wed Oct 31 17:59:22 2007 +0100
19549 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
19551 This function is used to either turn cache on or off in a specific
19554 Signed-off-by: Stefan Roese <sr@denx.de>
19556 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
19557 Author: Stefan Roese <sr@denx.de>
19558 Date: Wed Oct 31 17:57:52 2007 +0100
19560 ppc4xx: Remove cache definition from 4xx board config files
19562 All 4xx board config files don't need the cache definitions anymore.
19563 These are now defined in common headers.
19565 Signed-off-by: Stefan Roese <sr@denx.de>
19567 commit 9b94ac61d2176185c30adf0793e079ec30e68687
19568 Author: Stefan Roese <sr@denx.de>
19569 Date: Wed Oct 31 17:55:58 2007 +0100
19571 ppc4xx: Rework 4xx cache support
19573 New cache handling functions added and all existing functions
19574 moved from start.S into seperate cache.S.
19576 Signed-off-by: Stefan Roese <sr@denx.de>
19578 commit 06713773da4ac3d390c63d82641eb553224b27c2
19579 Author: Stefan Roese <sr@denx.de>
19580 Date: Tue Oct 23 18:03:12 2007 +0200
19582 ppc4xx: Remove compiler warning from previous commit
19584 Signed-off-by: Stefan Roese <sr@denx.de>
19586 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
19587 Author: Stefan Roese <sr@denx.de>
19588 Date: Tue Oct 23 14:40:30 2007 +0200
19590 ppc4xx: Remove temporary TLB entry in POST cache test
19592 Signed-off-by: Stefan Roese <sr@denx.de>
19594 commit 1338e6a81834099ba19733b69aafd8ef5f098094
19595 Author: Stefan Roese <sr@denx.de>
19596 Date: Tue Oct 23 14:05:08 2007 +0200
19598 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
19600 I lately noticed, that newer 4xx board with GBit support sometimes don't
19601 finish link autonegotiation in 4 seconds. Changing this timeout to 5
19602 seconds seems fine here.
19604 Signed-off-by: Stefan Roese <sr@denx.de>
19606 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
19607 Author: Stefan Roese <sr@denx.de>
19608 Date: Tue Oct 23 14:03:17 2007 +0200
19610 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
19612 This patch changes all in32/out32 calls to use the recommended in_be32/
19613 out_be32 macros instead.
19615 Signed-off-by: Stefan Roese <sr@denx.de>
19617 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
19618 Author: Stefan Roese <sr@denx.de>
19619 Date: Thu Oct 25 12:24:59 2007 +0200
19621 ppc4xx: Fix POST ethernet test for Haleakala
19623 The POST ethernet test needed to be changed to dynamically determine
19624 the count of ethernet devices. This code is cloned from the 4xx
19627 Signed-off-by: Stefan Roese <sr@denx.de>
19629 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
19630 Author: Stefan Roese <sr@denx.de>
19631 Date: Tue Oct 23 11:31:05 2007 +0200
19633 ppc4xx: Correct UART input clock calculation and passing to fdt
19635 We now use a value in the gd (global data) structure for the UART input
19636 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
19639 Signed-off-by: Stefan Roese <sr@denx.de>
19641 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
19642 Author: Stefan Roese <sr@denx.de>
19643 Date: Tue Oct 23 10:10:08 2007 +0200
19645 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
19647 The Haleakala is nearly identical with the Kilauea eval board. The only
19648 difference is that the 405EXr only supports one EMAC and one PCIe
19649 interface. This patch adds support for the Haleakala board by using
19650 the identical image for Kilauea and Haleakala. The distinction is done
19651 by comparing the PVR.
19653 Signed-off-by: Stefan Roese <sr@denx.de>
19655 commit 9f798766aa85e62eb8fa8c721e148df609b78137
19656 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
19657 Date: Tue Oct 23 08:29:10 2007 +0200
19659 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
19661 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
19664 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
19665 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
19666 modules are still plugged in. So it is recommended to remove the DIMM
19667 modules while using the NAND booting code with the fixed SDRAM setup!
19669 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
19670 Signed-off-by: Stefan Roese <sr@denx.de>
19672 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
19673 Author: Stefan Roese <sr@denx.de>
19674 Date: Mon Oct 22 16:24:44 2007 +0200
19676 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
19678 Signed-off-by: Stefan Roese <sr@denx.de>
19680 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
19681 Author: Stefan Roese <sr@denx.de>
19682 Date: Mon Oct 22 16:22:40 2007 +0200
19684 ppc4xx: Rework of 4xx serial driver (4)
19688 - Use in_8/out_8 macros instead of in8/out8
19689 - No need for UART_BASE marco anymore, now really handled via function
19691 - serial_init_common() introduced
19692 - Further coding style cleanup
19694 Signed-off-by: Stefan Roese <sr@denx.de>
19696 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
19697 Author: Stefan Roese <sr@denx.de>
19698 Date: Mon Oct 22 15:45:49 2007 +0200
19700 ppc4xx: Rework of 4xx serial driver (3)
19702 Change all linker scripts to reference the changed driver name iop480_uart.o.
19704 Signed-off-by: Stefan Roese <sr@denx.de>
19706 commit 882ae41274921f9016131806bdeb27e19606f47a
19707 Author: Stefan Roese <sr@denx.de>
19708 Date: Mon Oct 22 15:44:39 2007 +0200
19710 ppc4xx: Rework of 4xx serial driver (2)
19712 Change all linker scripts to reference the changed driver name 4xx_uart.o.
19714 Note: In most cased all these explicit referencing of these object files
19715 in the linker scripts is not neccessary. Only for manually embedded
19716 environment into the U-Boot image, which is not done is most cases.
19718 Signed-off-by: Stefan Roese <sr@denx.de>
19720 commit ad31e40bed042cb670d0036fea96435007afb838
19721 Author: Stefan Roese <sr@denx.de>
19722 Date: Mon Oct 22 15:09:59 2007 +0200
19724 ppc4xx: Rework of 4xx serial driver (1)
19726 This patch starts the rework of the PPC4xx serial driver. First we split
19727 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
19728 handling code and the other one iop480_uart.c with the UART code for the
19729 PLX-Tech IOP480 PPC (PPC403 based).
19731 Signed-off-by: Stefan Roese <sr@denx.de>
19733 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
19734 Author: Stefan Roese <sr@denx.de>
19735 Date: Mon Oct 22 10:30:38 2007 +0200
19737 ppc4xx: Correct UART input clock calculation and passing to fdt
19739 Signed-off-by: Stefan Roese <sr@denx.de>
19741 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
19742 Author: Stefan Roese <sr@denx.de>
19743 Date: Mon Oct 22 07:34:34 2007 +0200
19745 ppc4xx: Add initial AMCC Makalu 405EX support
19747 Signed-off-by: Stefan Roese <sr@denx.de>
19749 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
19750 Author: Stefan Roese <sr@denx.de>
19751 Date: Mon Oct 22 07:33:52 2007 +0200
19753 ppc4xx: Add freqUART to CPU speed detection
19755 This value is needed later for the device tree configuration of
19758 Signed-off-by: Stefan Roese <sr@denx.de>
19760 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
19761 Author: Stefan Roese <sr@denx.de>
19762 Date: Sun Oct 21 14:26:29 2007 +0200
19764 ppc: Small Kilauea cleanup of config file
19766 Signed-off-by: Stefan Roese <sr@denx.de>
19768 commit 758c037aeead34b49631b8da3a90b1bba14c0410
19769 Author: Stefan Roese <sr@denx.de>
19770 Date: Sun Oct 21 08:16:12 2007 +0200
19772 rtc: Add Xicor/Intersil X1205 RTC support
19774 This patch adds support for the Xicor/Intersil X1205 RTC used on the
19775 AMCC Makalu eval board. This driver is basically cloned from the Linux
19776 driver version (2.6.23).
19778 This patch also introduces the Linux bcd.h header for the BCD2BIN/
19779 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
19780 should be converted to also use this header instead of implementing
19781 their own local copy of these functions/macros.
19783 Signed-off-by: Stefan Roese <sr@denx.de>
19785 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
19786 Author: Stefan Roese <sr@denx.de>
19787 Date: Sun Oct 21 08:12:41 2007 +0200
19789 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
19791 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
19792 PPC440_SYS_INFO structure into the common ppc4xx.h header.
19794 Lot's of other macros are good candidates to be consolidated this way
19797 Signed-off-by: Stefan Roese <sr@denx.de>
19799 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
19800 Author: Stefan Roese <sr@denx.de>
19801 Date: Sun Oct 21 08:05:18 2007 +0200
19803 ppc4xx: Fix size setup in Kilauea DDR2 init routine
19805 The size was initilized wrong. Instead of 256MB, the DDR2 controller
19806 was setup to 512MB. Now the correct values is used.
19808 This patch also does a little cleanup and adds a comment here.
19810 Signed-off-by: Stefan Roese <sr@denx.de>
19812 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
19813 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
19814 Date: Thu Oct 18 17:29:04 2007 +0200
19816 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
19818 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
19819 number is used to access system registers.
19821 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
19822 Signed-off-by: Stefan Roese <sr@denx.de>
19824 commit c36c68160333ac5fe41ec3db12a728b7075b3912
19825 Author: Stefan Roese <sr@denx.de>
19826 Date: Thu Oct 18 07:42:27 2007 +0200
19828 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
19830 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
19831 is the internal SRAM. Since I now ported and tested this endpoint mode
19832 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
19835 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
19838 Signed-off-by: Stefan Roese <sr@denx.de>
19840 commit 5cb4af4791f61843432155142b6cfac901f66c10
19841 Author: Stefan Roese <sr@denx.de>
19842 Date: Thu Oct 18 07:39:38 2007 +0200
19844 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
19846 This patch adds endpoint support for the AMCC Kilauea eval board. It can
19847 be tested by connecting a reworked PCIe cable (only 1x lane singles
19848 connected) to another root-complex.
19850 In this test setup, a 64MB inbound window is configured at BAR0 which maps
19851 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
19852 access the first 64MB of the SDRAM on the PPC side.
19854 Signed-off-by: Stefan Roese <sr@denx.de>
19856 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
19857 Author: Stefan Roese <sr@denx.de>
19858 Date: Sat Oct 13 16:43:23 2007 +0200
19860 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
19862 This patch adds support for dynamic configuration of PCIe ports for the
19863 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
19864 boards Yucca & Katmai and the 405EX board Kilauea.
19866 This dynamic configuration is done via the "pcie_mode" environement
19867 variable. This variable can be set to "EP" or "RP" for endpoint or
19868 rootpoint mode. Multiple values can be joined via the ":" delimiter.
19873 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
19876 Per default Yucca will be configured as:
19879 Per default Katmai will be configured as:
19880 pcie_mode=RP:RP:REP
19882 Per default Kilauea will be configured as:
19885 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
19886 Signed-off-by: Stefan Roese <sr@denx.de>
19888 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
19889 Author: Stefan Roese <sr@denx.de>
19890 Date: Thu Oct 11 11:15:59 2007 +0200
19892 ppc4xx: Enable device tree support (fdt) on Kilauea per default
19894 This patch enables the fdt support on the AMCC Kilauea eval board.
19895 Additionally now EBC ranges fdt fixup is included to support NOR
19896 FLASH mapping via the Linux physmap_of driver.
19898 This Kilauea port now support booting arch/ppc and arch/powerpc
19899 Linux kernels. The default environment "net_nfs" is for arch/ppc
19900 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
19901 support will be removed.
19903 Signed-off-by: Stefan Roese <sr@denx.de>
19905 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
19906 Author: Stefan Roese <sr@denx.de>
19907 Date: Thu Oct 11 11:11:45 2007 +0200
19909 ppc4xx: Add additional debug info to 4xx fdt support
19911 Signed-off-by: Stefan Roese <sr@denx.de>
19913 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
19914 Author: Stefan Roese <sr@denx.de>
19915 Date: Fri Oct 5 21:28:58 2007 +0200
19917 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
19919 Signed-off-by: Stefan Roese <sr@denx.de>
19921 commit 1941cce71b1ae975602854045061e82f94ecd012
19922 Author: Stefan Roese <sr@denx.de>
19923 Date: Fri Oct 5 17:35:10 2007 +0200
19925 ppc4xx: Fix small merge problem in 4xx_enet.c
19927 Signed-off-by: Stefan Roese <sr@denx.de>
19929 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
19930 Author: Stefan Roese <sr@denx.de>
19931 Date: Fri Oct 5 17:11:30 2007 +0200
19933 ppc4xx: Add initial AMCC Kilauea 405EX support
19935 Signed-off-by: Stefan Roese <sr@denx.de>
19937 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
19938 Author: Stefan Roese <sr@denx.de>
19939 Date: Fri Oct 5 17:10:59 2007 +0200
19941 ppc4xx: Add PPC405EX support
19943 Signed-off-by: Stefan Roese <sr@denx.de>
19945 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
19946 Author: Stefan Roese <sr@denx.de>
19947 Date: Fri Oct 5 17:09:36 2007 +0200
19949 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
19951 Signed-off-by: Stefan Roese <sr@denx.de>
19953 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
19954 Author: Stefan Roese <sr@denx.de>
19955 Date: Fri Oct 5 17:07:50 2007 +0200
19957 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
19959 Signed-off-by: Stefan Roese <sr@denx.de>
19961 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
19962 Author: Stefan Roese <sr@denx.de>
19963 Date: Fri Oct 5 17:04:57 2007 +0200
19965 POST: Add 405EX support to 4xx UART POST test
19967 Signed-off-by: Stefan Roese <sr@denx.de>
19969 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
19970 Author: Stefan Roese <sr@denx.de>
19971 Date: Fri Oct 5 15:10:02 2007 +0200
19973 DTT: Prepare DS1775 driver for use of different I2C addresses
19975 Signed-off-by: Stefan Roese <sr@denx.de>
19977 commit 19e93b1e16d267220440d827b920fbad8abfa70f
19978 Author: Stefan Roese <sr@denx.de>
19979 Date: Fri Oct 5 14:23:43 2007 +0200
19981 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
19983 Signed-off-by: Stefan Roese <sr@denx.de>
19985 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
19986 Author: Stefan Roese <sr@denx.de>
19987 Date: Fri Oct 5 09:22:33 2007 +0200
19989 ppc4xx: 4xx_pcie: Disable debug output as default
19991 Signed-off-by: Stefan Roese <sr@denx.de>
19993 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
19994 Author: Stefan Roese <sr@denx.de>
19995 Date: Fri Oct 5 09:18:23 2007 +0200
19997 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
19999 Signed-off-by: Stefan Roese <sr@denx.de>
20001 commit 4dbee8a90df613eb517aadbecebd70f168913d30
20002 Author: Stefan Roese <sr@denx.de>
20003 Date: Fri Oct 5 07:57:20 2007 +0200
20005 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
20007 128MB seems to be the smallest possible value for the memory size
20008 for on PCIe port. With this change now the BAR's of the PCIe cards
20009 are accessible under U-Boot.
20011 One big note: This only works for PCIe port 0 & 1. For port 2 this
20012 currently doesn't work, since the base address is now 0xc0000000
20013 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
20014 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
20015 to change the base addresses completely and this change would have
20016 too much impact right now.
20018 This patch adds debug output to the 4xx pcie driver too.
20020 Signed-off-by: Stefan Roese <sr@denx.de>
20022 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
20023 Author: Stefan Roese <sr@denx.de>
20024 Date: Wed Oct 3 21:16:32 2007 +0200
20026 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
20028 Signed-off-by: Stefan Roese <sr@denx.de>
20030 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
20031 Author: Stefan Roese <sr@denx.de>
20032 Date: Wed Oct 3 15:01:02 2007 +0200
20034 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
20036 These files were introduced with the IBM 405GP but are currently used on all
20037 4xx PPC platforms. So the name doesn't match the content anymore. This patch
20038 renames the files to 4xx_pci.c/h.
20040 Signed-off-by: Stefan Roese <sr@denx.de>
20042 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
20043 Author: Stefan Roese <sr@denx.de>
20044 Date: Wed Oct 3 14:14:58 2007 +0200
20046 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
20048 Signed-off-by: Stefan Roese <sr@denx.de>
20050 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
20051 Author: Stefan Roese <sr@denx.de>
20052 Date: Wed Oct 3 10:38:09 2007 +0200
20054 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
20056 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
20057 the SDR registers of the PCIe ports. This makes the overall design
20058 clearer, since it removed a lot of switch statements which are not
20061 Also, the functions ppc4xx_init_pcie_rootport() and
20062 ppc4xx_init_pcie_entport() are merged into a single function
20063 ppc4xx_init_pcie_port(), since most of the code was duplicated.
20064 This makes maintainance and porting to other 4xx platforms
20067 Signed-off-by: Stefan Roese <sr@denx.de>
20069 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
20070 Author: Stefan Roese <sr@denx.de>
20071 Date: Wed Oct 3 07:48:09 2007 +0200
20073 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
20075 This patch is the first patch of a series to make the 440SPe PCIe code
20076 usable on different 4xx PPC platforms. In preperation for the new 405EX
20077 which is also equipped with PCIe interfaces.
20079 (2) This patch renames the functions from 440spe_ to 4xx_ with a
20080 little additional cleanup
20082 Signed-off-by: Stefan Roese <sr@denx.de>
20084 commit c7c6da23028f146d912514b95aefa3da7cf37699
20085 Author: Stefan Roese <sr@denx.de>
20086 Date: Wed Oct 3 07:34:10 2007 +0200
20088 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
20090 This patch is the first patch of a series to make the 440SPe PCIe code
20091 usable on different 4xx PPC platforms. In preperation for the new 405EX
20092 which is also equipped with PCIe interfaces.
20094 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
20096 Signed-off-by: Stefan Roese <sr@denx.de>
20098 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
20099 Author: Marian Balakowicz <m8@semihalf.com>
20100 Date: Wed Oct 24 01:37:36 2007 +0200
20102 TQM5200: Call usb_cpu_init() during board init
20104 usb_cpu_init() configures GPS USB pins, clocks, etc. and
20105 is required for proper operation of kernel USB subsystem.
20106 This setup was previously done in the kernel by the fixup
20107 code which is being removed, thus low level init must be
20108 done by U-boot now.
20110 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20111 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
20113 commit b5af773f8d92677e06f3295b45557c9d0a487c24
20114 Author: Zhang Wei <wei.zhang@freescale.com>
20115 Date: Thu Oct 25 17:51:27 2007 +0800
20117 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
20119 The scan code of the key 'z' is 0x1d, which should be handled.
20121 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
20124 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
20125 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
20127 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
20128 Author: Rodolfo Giometti <giometti@enneenne.com>
20129 Date: Mon Oct 15 11:59:17 2007 +0200
20131 PXA USB OHCI: "usb stop" implementation.
20133 Some USB keys need to be switched off before loading the kernel
20134 otherwise they can remain in an undefined status which prevents them
20135 to be correctly recognized by the kernel.
20137 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
20138 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
20140 commit 31548249decf18a6b877a18436b6139dd483fe4a
20141 Author: Justin Flammia <jflammia@savantav.com>
20142 Date: Mon Oct 29 17:40:35 2007 -0400
20146 This is a multi-part message in MIME format.
20148 commit e6e505eae94ed721e123e177489291fc4544b7b8
20149 Author: Justin Flammia <jflammia@savantav.com>
20150 Date: Mon Oct 29 17:19:03 2007 -0400
20152 Found a bug in the way the DHCP Request packet is built, where the IP address
20153 that is offered by the server is bound to prematurely. This patch is a fix of
20154 that bug where the IP address offered by the DHCP server is not used until
20155 after the DHCP ACK from the server is received.
20157 Signed-off-by: Justin Flammia <jflammia@savantav.com>
20158 Signed-off-by: Ben Warren <bwarren@qstreams.com>
20160 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
20161 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20162 Date: Thu Oct 25 17:16:22 2007 -0500
20164 ColdFire 54455: Fix correct boot location for atmel and intel
20166 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20168 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
20169 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20170 Date: Thu Oct 25 17:14:00 2007 -0500
20172 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
20174 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20176 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
20177 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20178 Date: Thu Oct 25 17:12:36 2007 -0500
20180 ColdFire 5329: Assign correct SDRAM size and fix cache
20182 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20184 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
20185 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20186 Date: Thu Oct 25 17:10:23 2007 -0500
20188 ColdFire 5253: Assign correct SDRAM size
20190 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20192 commit 2acefa72ee0026f862ab65597ca687428f63a973
20193 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20194 Date: Thu Oct 25 17:09:17 2007 -0500
20196 ColdFire 5282: Fix external flash boot and return dramsize
20198 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
20200 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
20201 Author: Bartlomiej Sieka <tur@semihalf.com>
20202 Date: Thu Oct 25 17:20:01 2007 +0200
20204 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
20206 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20208 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
20209 Author: Martin Krause <martin.krause@tqs.de>
20210 Date: Wed Oct 24 08:42:25 2007 +0200
20212 TQM5200: fix spurious characters on second serial interface
20214 With this patch PSC3 is configured as UART. This is done, because if
20215 the pins of PSC3 are not configured at all (-> all pins are GPI),
20216 due to crosstalk, spurious characters may be send over the RX232_2_TXD
20219 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20220 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20222 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
20223 Author: Martin Krause <martin.krause@tqs.de>
20224 Date: Wed Oct 24 08:41:27 2007 +0200
20226 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
20228 Some commands for the STK52xx base board try to access the SM501 grafic
20229 controller. But the TQM5200S has no grafic controller (only the TQM5200
20230 and the TQM5200B have). This patch deactivates the commands accessing
20231 the SM501 for the TQM5200S.
20233 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20234 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20236 commit b31f64343ead9482cd439b1adbe4c34026a641b1
20237 Author: Martin Krause <martin.krause@tqs.de>
20238 Date: Mon Oct 22 16:45:53 2007 +0200
20240 TQM5200: fix spurious characters on second serial interface
20242 With this patch PSC3 is configured as UART. This is done, because if
20243 the pins of PSC3 are not configured at all (-> all pins are GPI),
20244 due to crosstalk, spurious characters may be send over the RX232_2_TXD
20247 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20249 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
20250 Author: Martin Krause <martin.krause@tqs.de>
20251 Date: Mon Oct 22 16:40:06 2007 +0200
20253 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
20255 Some commands for the STK52xx base board try to access the SM501 grafic
20256 controller. But the TQM5200S has no grafic controller (only the TQM5200
20257 and the TQM5200B have). This patch deactivates the commands accessing
20258 the SM501 for the TQM5200S.
20260 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20262 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
20263 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20264 Date: Sun Oct 21 09:14:28 2007 +0200
20266 Mips: Fix string functions differ prototype declaration
20268 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20270 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
20271 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
20272 Date: Fri Oct 19 17:51:40 2007 -0500
20274 fsl_pci_init enable COMMAND_MEMORY if inbound window
20276 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
20277 to pciauto_setup_device has the side effect of not getting
20278 COMMAND_MEMORY set.
20280 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20282 commit e9d0d527992566ebef9826962ff1745b2f082b92
20283 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20284 Date: Fri Oct 19 10:55:24 2007 +0200
20286 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
20288 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20290 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
20291 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20292 Date: Fri Oct 19 08:10:15 2007 +0200
20294 fix warning: no return statement in function returning non-void
20296 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20298 commit e78220f6e514206757acfe247297fc9a328a881f
20299 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20300 Date: Fri Oct 19 06:33:45 2007 +0200
20302 xsengine: Fix no partition type specified, use DOS as default
20304 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20306 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
20307 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20308 Date: Fri Oct 19 00:24:59 2007 +0200
20310 lubbock: Fix no partition type specified, use DOS as default
20312 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20314 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
20315 Author: Wolfgang Denk <wd@denx.de>
20316 Date: Tue Oct 23 16:50:03 2007 +0200
20318 Coding style: keep lists sorted; update CHANGELOG
20320 Signed-off-by: Wolfgang Denk <wd@denx.de>
20322 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
20323 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20324 Date: Fri Oct 19 00:09:05 2007 +0200
20326 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
20328 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20330 commit 96455bfebc9887837095c9051d216f53c61b5f10
20331 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20332 Date: Fri Oct 19 00:07:39 2007 +0200
20334 Fix warning differ in signedness in board/innokom/innokom.c
20336 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20338 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
20339 Author: Marcel Ziswiler <marcel@ziswiler.com>
20340 Date: Fri Oct 19 00:25:33 2007 +0200
20342 fix pxa255_idp board
20344 The pxa255_idp being an old unmaintained board showed several issues:
20345 1. CONFIG_INIT_CRITICAL was still defined.
20346 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
20347 3. Symbol flash_addr was undeclared.
20348 4. The boards lowlevel_init function was still called memsetup.
20349 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
20350 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
20351 'target CPU does not support interworking' warnings on recent compilers.
20352 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
20353 indexes rather than the register definitions from the pxa-regs header
20354 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
20355 avoid any ambiguities.
20356 8. There were several redefinition warnings concerning ICMR, OSMR3,
20357 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
20358 9. The board configuration file was rather outdated.
20359 10. The part header file defined the vendor, product and revision arrays
20360 as unsigned chars instead of just chars in the block_dev_desc_t
20363 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
20365 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
20366 Author: Rune Torgersen <runet@innovsys.com>
20367 Date: Wed Oct 17 11:56:31 2007 -0500
20369 Make MPC8266ADS command selection more robust
20371 Fix MPC8266 command line definition so it won't break when new commands
20372 are added to u-boot.
20373 Signed-off-by Rune Torgersen <runet@innovsys.com>
20375 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
20376 Author: Bartlomiej Sieka <tur@semihalf.com>
20377 Date: Tue Oct 23 13:14:10 2007 +0200
20379 Motion-PRO: Update configuration to accomodate next generation board.
20381 New board has faster oscillator and a different Flash chip. This affects:
20382 - CFG_MPC5XXX_CLKIN
20384 - Flash CS configuration (timings)
20385 - Flash sector size, and thus MTD partition layout
20386 - malloc() arena size (due to bigger Flash sectors)
20387 - smaller memory test range (due to bigger malloc() arena)
20389 This patch also enables more extensive memory testing via "mtest".
20391 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20393 commit eff501904df2bf1724a750062628ba2c51dbb1f8
20394 Author: Bartlomiej Sieka <tur@semihalf.com>
20395 Date: Tue Oct 23 11:36:07 2007 +0200
20397 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
20399 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
20400 register must be written a value of 0x00000004 as the first step of the
20401 SDRAM contorller configuration.
20403 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20405 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
20406 Author: Peter Pearse <peter.pearse@arm.com>
20407 Date: Tue Oct 23 10:22:16 2007 +0100
20409 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
20411 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
20412 Author: Stefan Roese <sr@denx.de>
20413 Date: Tue Oct 23 10:17:42 2007 +0200
20415 ppc4xx: lwmon5: Some further GPIO config changes
20417 Signed-off-by: Stefan Roese <sr@denx.de>
20419 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
20420 Author: Vlad Lungu <vlad@comsys.ro>
20421 Date: Sun Oct 21 22:10:10 2007 +0900
20423 [MIPS] Fix UNCACHED_SDRAM
20425 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
20427 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
20428 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20430 commit 00101dd7a32d12f698150123e47e4b3420279f86
20431 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20432 Date: Sun Oct 21 21:30:42 2007 +0900
20434 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
20436 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20438 commit eb700636db017d310edaeb559b13d82588560674
20439 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20440 Date: Sun Oct 21 10:55:37 2007 +0900
20442 [MIPS] u-boot.lds: Define _gp in a standard manner
20444 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20446 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
20447 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20448 Date: Sun Oct 21 10:55:36 2007 +0900
20450 [MIPS] Fix $gp usage
20452 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
20453 As a general principle, we should use _gp for $gp.
20455 Thanks to linker script's help we fortunately have _gp which equals to
20456 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
20457 be able to access to GOT entires, global variables and procedure entry
20458 points. The right thing to do is to use _gp.
20460 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
20461 which holds the offset from _gp. When updating GOT entries, we use this
20462 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
20464 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
20465 I made some change to leave over num_got_entries.
20467 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20468 Cc: Vlad Lungu <vlad@comsys.ro>
20470 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
20471 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20472 Date: Sun Oct 21 10:55:36 2007 +0900
20474 [MIPS] u-boot.lds: Fix __got_start and __got_end
20476 Ensure that __got_start points to top of the `.got', and __got_end points
20477 to bottom as well, so that we never fail to count num_got_entries.
20479 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20481 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
20482 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20483 Date: Sun Oct 21 10:55:36 2007 +0900
20485 [MIPS] u-boot.lds: Remove duplicated .sdata section
20487 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
20489 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
20490 Author: Wolfgang Denk <wd@denx.de>
20491 Date: Sun Oct 21 01:01:17 2007 +0200
20493 Minor coding style cleanup; update CHANGELOG
20495 Signed-off-by: Wolfgang Denk <wd@denx.de>
20497 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
20498 Author: Vlad Lungu <vlad@comsys.ro>
20499 Date: Thu Oct 4 20:47:10 2007 +0300
20503 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
20504 to do anything in eth_stop() if eth_init() was not called.
20505 Simplified RX path in order to avoid timeouts on really really
20506 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
20507 clever enough to cope with 1 packet per eth_rx().
20509 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
20511 commit df90968b48fb34fa9072fab150db2ac89678f537
20512 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
20513 Date: Mon Sep 24 13:32:13 2007 -0400
20515 Setting MSR[DE] in do_reset
20518 This patch ensures the soft reset of the board for the 85xx boards
20519 by setting the MSR[DE] in the do_reset function.
20521 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
20523 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
20524 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
20525 Date: Mon Sep 24 13:36:01 2007 -0400
20530 This patch fixes the MSR overwrite in the start.S when moving out of
20533 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
20535 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
20536 Author: Dan Wilson <dwilson@fulcrummicro.com>
20537 Date: Fri Oct 19 11:33:48 2007 -0500
20539 tsec driver should clear RHALT on startup
20541 This was causing problems for some people.
20543 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
20544 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
20545 Signed-off-by: Andy Fleming <afleming@freescale.com>
20547 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
20548 Author: Kumar Gala <galak@kernel.crashing.org>
20549 Date: Thu Oct 11 00:29:18 2007 -0500
20551 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
20553 On the MPC85xx CDS we have two issues:
20555 1. The device tree fixup code did not check to see if the property we are
20556 trying to update is actually found. Its possible that it would update
20557 random memory starting at 0.
20559 2. Newer Linux kernel's have moved the location of the PCI nodes to be
20560 sibilings of the soc node and not children. The explicit PATH to the PCI
20561 node would not be found for these device trees. Add the ability to handle
20562 both paths. In the future we shouldn't handle such fixups by explicit path.
20564 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20566 commit a3063eec775719b7e91023bbec3f64b3118791df
20567 Author: Kumar Gala <galak@kernel.crashing.org>
20568 Date: Thu Oct 11 00:18:48 2007 -0500
20570 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
20572 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
20573 console. Make it so we match that config what we tell Linux as the early
20576 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20578 commit e1ce3cb617bb06f91f82f98915391175addf3e82
20579 Author: Kumar Gala <galak@kernel.crashing.org>
20580 Date: Tue Oct 2 11:12:27 2007 -0500
20582 Remove magic numbers from cache related operations for mpc85xx
20584 The mpc85xx start code uses some magic numbers that we actually
20585 have #defines for in <config.h> so use those instead.
20587 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20589 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
20590 Author: Detlev Zundel <dzu@denx.de>
20591 Date: Fri Oct 19 16:47:26 2007 +0200
20595 Signed-off-by: Detlev Zundel <dzu@denx.de>
20597 commit 281df457c1aa50d2752165d0c5c3282d4027b974
20598 Author: Tony Li <tony.li@freescale.com>
20599 Date: Thu Oct 18 17:47:19 2007 +0800
20601 mpc83xx: Add configure entry for MPC83xx ATM support
20603 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
20604 Makfile and MAKEALL
20606 Signed-off-by: Tony Li <tony.li@freescale.com>
20607 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20609 commit d2646554f529a9577515eceb0ec5eceee18244ba
20610 Author: Tony Li <tony.li@freescale.com>
20611 Date: Thu Oct 18 17:44:38 2007 +0800
20613 mpc83xx: pq-mds-pib.c typo error
20615 Correct to val8 from val.
20617 Signed-off-by: Tony Li <tony.li@freescale.com>
20618 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20620 commit 3e11ae80fec1ee12194940955431186abf6009c2
20621 Author: Stefan Roese <sr@denx.de>
20622 Date: Wed Oct 17 15:40:19 2007 +0200
20624 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
20626 Signed-off-by: Stefan Roese <sr@denx.de>
20628 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
20629 Author: Jon Loeliger <jdl@freescale.com>
20630 Date: Tue Oct 16 15:27:43 2007 -0500
20632 Initial mpc8610hpcd Makefile files.
20634 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20635 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
20636 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
20637 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20639 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
20640 Author: Jon Loeliger <jdl@freescale.com>
20641 Date: Tue Oct 16 15:26:51 2007 -0500
20643 Initial mpc8610hpcd cpu/, README and include/ files.
20645 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20646 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
20647 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
20648 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20650 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
20651 Author: Jon Loeliger <jdl@freescale.com>
20652 Date: Tue Oct 16 13:54:01 2007 -0500
20654 Initial mpc8610hpcd board files.
20656 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20657 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
20658 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
20659 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20661 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
20662 Author: runet@innovsys.com <runet@innovsys.com>
20663 Date: Tue Oct 16 14:50:40 2007 -0500
20665 Make MPC8266ADS board compile again.
20667 Signed-off-by: Runet Torgersen <runet@innovsys.com>
20669 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
20670 Author: Jon Loeliger <jdl@freescale.com>
20671 Date: Mon Aug 27 12:41:03 2007 -0500
20673 86xx: Allow for fewer DDR slots per memory controller.
20675 As a direct correlation exists between DDR DIMM slots
20676 and SPD EEPROM addresses used to configure them, use
20677 the individually defined SPD_EEPROM_ADDRESS* values to
20678 determine if a DDR DIMM slot should have its SPD
20679 configuration read or not.
20681 Effectively, this now allows for 1 or 2 DIMM slots
20682 per memory controller.
20684 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20686 commit 4d4a945e189a2f384c66432316da2788a0ac1607
20687 Author: Rodolfo Giometti <giometti@enneenne.com>
20688 Date: Mon Oct 15 11:59:17 2007 +0200
20690 PXA USB OHCI: "usb stop" implementation.
20692 Some USB keys need to be switched off before loading the kernel
20693 otherwise they can remain in an undefined status which prevents them
20694 to be correctly recognized by the kernel.
20696 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
20698 commit e2e93442e558cf1500e92861f99713b2f045ea22
20699 Author: Stefan Roese <sr@denx.de>
20700 Date: Mon Oct 15 11:39:00 2007 +0200
20702 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
20704 The I2C bootstrap values that can be setup via the "bootstrap" command,
20705 were setup incorrect regarding the generation of the internal sync PCI
20706 clock. The values for PLB clock == 133MHz were slighly incorrect and the
20707 values for PLB clock == 166MHz were totally incorrect. This could
20708 lead to a hangup upon booting while PCI configuration scan.
20710 This patch fixes this issue and configures valid PCI divisor values
20711 for the sync PCI clock, with respect to the provided external async
20714 Here the values of the formula in the chapter 14.2 "PCI clocking"
20715 from the 440EPx users manual:
20717 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
20719 33MHz async PCI frequency:
20721 => 32 <= 44.3 <= 65 (div = 3)
20724 => 32 <= 55.3 <= 65 (div = 3)
20726 66MHz async PCI frequency:
20728 => 65 <= 66.5 <= 132 (div = 2)
20731 => 65 <= 83 <= 132 (div = 2)
20733 Signed-off-by: Stefan Roese <sr@denx.de>
20735 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
20736 Author: Stefan Roese <sr@denx.de>
20737 Date: Mon Oct 15 11:29:33 2007 +0200
20739 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
20741 The BCSR status bit for the 66MHz PCI operation was correctly
20742 addressed (MSB/LSB problem). Now the correct currently setup
20743 PCI frequency is displayed upon bootup.
20745 This patch also fixes this problem on Rainier & Yellowstone, since these
20746 boards use the same souce code as Sequoia & Yosemite do.
20748 Signed-off-by: Stefan Roese <sr@denx.de>
20750 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
20751 Author: Martin Krause <martin.krause@tqs.de>
20752 Date: Wed Sep 26 17:55:56 2007 +0200
20754 TQM860M: adjust for doubled flash sector size.
20756 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
20757 doubled sector size.
20759 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20761 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
20762 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
20763 Date: Wed Sep 26 17:55:54 2007 +0200
20765 TQM8xx: Fix CAN timing.
20767 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20769 commit d43e489baf02afae49077791fb22332d240d8656
20770 Author: Martin Krause <martin.krause@tqs.de>
20771 Date: Thu Sep 27 14:54:36 2007 +0200
20773 TQM866M: fix SDRAM refresh
20775 At 133 MHz the current SDRAM refresh rate is too fast
20776 (measured 4 * 1.17 us).
20777 CFG_MAMR_PTA changes from 39 to 97. This result
20778 in a refresh rate of 4 * 7.8 us at the default clock
20779 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
20780 This is a compromise until a new method is found to
20781 adjust the refresh rate.
20783 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20785 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
20786 Author: Martin Krause <martin.krause@tqs.de>
20787 Date: Wed Sep 26 17:55:55 2007 +0200
20789 TQM866M: adjust for doubled flash sector size.
20791 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
20792 doubled sector size.
20794 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20796 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
20797 Author: Michal Simek <monstr@monstr.eu>
20798 Date: Sun Oct 14 16:12:29 2007 +0200
20800 [FIX] XUPV2P change command handling
20801 and remove code violation
20803 commit 636400198228d96983c06657b17f760f5989958e
20804 Author: Wolfgang Denk <wd@denx.de>
20805 Date: Sun Oct 14 00:13:19 2007 +0200
20807 Prepare for 1.3.0-rc3 release
20809 Signed-off-by: Wolfgang Denk <wd@denx.de>
20811 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
20812 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20813 Date: Sat Sep 29 13:41:37 2007 +0200
20815 Fix warning differ in signedness in cpu/pxa/mmc.c
20817 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20819 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
20820 Author: Wolfgang Denk <wd@denx.de>
20821 Date: Sat Oct 13 23:51:14 2007 +0200
20823 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
20825 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20826 Signed-off-by: Wolfgang Denk <wd@denx.de>
20828 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
20829 Author: Wolfgang Denk <wd@denx.de>
20830 Date: Sat Oct 13 21:15:39 2007 +0200
20832 Coding Style cleanup.
20834 Signed-off-by: Wolfgang Denk <wd@denx.de>
20836 commit e1893815b0999410d7a327589611c7b38e95299e
20837 Author: Wolfgang Denk <wd@denx.de>
20838 Date: Fri Oct 12 15:49:39 2007 +0200
20840 GP3 SSA: enable RTC
20842 Signed-off-by: Wolfgang Denk <wd@denx.de>
20844 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
20845 Author: Grzegorz Bernacki <gjb@semihalf.com>
20846 Date: Tue Oct 9 13:58:24 2007 +0200
20848 [ads5121] EEPROM support added.
20850 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
20852 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
20853 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
20854 Date: Sat Oct 6 18:55:35 2007 +0200
20856 AVR32: Initialize bi_flash* in board_init_r
20858 The ATSTK1000-specific flash driver intializes bi_flashstart,
20859 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
20862 Initialize these in board_init_r instead so that things will still be
20863 set up correctly when we switch to the CFI driver.
20865 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
20867 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
20868 Author: Marian Balakowicz <m8@semihalf.com>
20869 Date: Fri Oct 5 10:40:54 2007 +0200
20871 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
20873 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20875 commit 92869195ef8210758d2176230c0a36897afd50ed
20876 Author: Bartlomiej Sieka <tur@semihalf.com>
20877 Date: Fri Oct 5 09:46:06 2007 +0200
20879 CM5200: Fix missing null-termination in hostname manipulation code
20881 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20883 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
20884 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
20885 Date: Tue Oct 2 19:09:01 2007 +0200
20887 Fix memtest breakage
20889 CFG_MEMTEST_START uses weird magic involving gd, which fails to
20890 compile. Use hardcoded values instead (we actually know how much RAM
20893 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
20895 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
20896 Author: Stefan Roese <sr@denx.de>
20897 Date: Tue Oct 2 11:44:46 2007 +0200
20899 ppc4xx: Coding style cleanup
20901 Signed-off-by: Stefan Roese <sr@denx.de>
20903 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
20904 Author: Stefan Roese <sr@denx.de>
20905 Date: Tue Oct 2 11:44:19 2007 +0200
20907 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
20909 Signed-off-by: Stefan Roese <sr@denx.de>
20911 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
20912 Author: Grzegorz Bernacki <gjb@semihalf.com>
20913 Date: Mon Oct 1 09:51:50 2007 +0200
20915 Program EPLD to force full duplex mode for PHY.
20917 EPLD forces modes of PHY operation. By default full duplex is turned off.
20918 This fix turns it on.
20920 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
20922 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
20923 Author: Timo Ketola <timo.ketola@exertus.fi>
20924 Date: Mon Sep 24 14:50:32 2007 +0300
20926 Bugfix: Use only one PTD for one endpoint
20928 Original isp116x-hcd code prepared multiple PTDs for longer than 16
20929 byte transfers for one endpoint. That is unnecessary because the
20930 ISP116x is able to split long data from one PTD into multiple
20931 transactions based on the buffer size of the endpoint. It also caused
20932 serious problems if the endpoint NAKed some of the transactions. In
20933 that case ISP116x wouldn't notice that the other PTDs were for the same
20934 endpoint and would try the other PTDs possibly out of order. That would
20935 break the whole transfer.
20937 This patch makes isp116x_submit_job to use one PTD for one transfer.
20939 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
20940 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
20942 commit 86ec86c04326c3913178a7679aa910de071da75d
20943 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20944 Date: Thu Sep 27 23:27:47 2007 +0200
20946 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
20948 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20950 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
20951 Author: Stefan Roese <sr@denx.de>
20952 Date: Tue Sep 11 14:12:55 2007 +0200
20954 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
20956 Signed-off-by: Stefan Roese <sr@denx.de>
20958 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
20959 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
20960 Date: Wed Sep 26 16:35:54 2007 -0500
20962 85xx io out functions need sync after write.
20964 This fixes the mc146818 rtc_read/write functions for 85xx.
20966 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20968 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
20969 Author: Grant Likely <grant.likely@secretlab.ca>
20970 Date: Tue Sep 25 15:48:05 2007 -0600
20972 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
20974 CFG_FPGA_XILINX is a bit value used to test against the value in
20975 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
20976 think that is the intention in this code.
20978 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
20980 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
20981 Author: Michal Simek <monstr@monstr.eu>
20982 Date: Mon Sep 24 00:41:30 2007 +0200
20984 [FIX] change command handling and removing code violation
20986 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
20987 Author: Michal Simek <monstr@monstr.eu>
20988 Date: Mon Sep 24 00:36:06 2007 +0200
20990 [FIX] change sets of commands
20991 because changing of command handling brings
20992 compilation problems
20994 commit cb1bc63b75a232571eb69aa2c8aa919321655845
20995 Author: Michal Simek <monstr@monstr.eu>
20996 Date: Mon Sep 24 00:30:42 2007 +0200
20998 [FIX] Email reparation & Copyright
20999 Both codes are written by myself without any
21002 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
21003 Author: Michal Simek <monstr@monstr.eu>
21004 Date: Mon Sep 24 00:25:11 2007 +0200
21006 [PATCH] Change macro name for UartLite
21007 because PowerPC 405 can use UartLite as console
21009 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
21010 Author: Michal Simek <monstr@monstr.eu>
21011 Date: Mon Sep 24 00:21:19 2007 +0200
21013 [PATCH] Add support for design without interrupt controller
21016 commit 0731933ec8ec45d02ba89b52df673d526873cdde
21017 Author: Michal Simek <monstr@monstr.eu>
21018 Date: Mon Sep 24 00:19:48 2007 +0200
21020 [FIX] resolve problem with cpu without barrel shifter
21022 commit db14d77995ce515b728b178b63f82babe60e3d56
21023 Author: Michal Simek <monstr@monstr.eu>
21024 Date: Mon Sep 24 00:18:46 2007 +0200
21026 [FIX] repair email address
21028 commit 481d4328618804add1f818a6c96296121cd0528e
21029 Author: Michal Simek <monstr@monstr.eu>
21030 Date: Mon Sep 24 00:17:42 2007 +0200
21032 [FIX] repair MFSL commands
21034 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
21035 Author: Michal Simek <monstr@monstr.eu>
21036 Date: Mon Sep 24 00:08:37 2007 +0200
21038 synchronizition with mainline
21040 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
21041 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21042 Date: Sun Sep 23 02:42:38 2007 +0900
21044 sh: Add support command of ide with sh
21046 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21048 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
21049 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21050 Date: Sun Sep 23 02:38:42 2007 +0900
21052 sh: Update Makefile
21054 Add support MS7722SE01 to Makefile.
21056 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21058 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
21059 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21060 Date: Sun Sep 23 02:31:13 2007 +0900
21062 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
21064 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21066 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
21067 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21068 Date: Sun Sep 23 02:19:24 2007 +0900
21070 sh: Update MS7750SE01 platform
21072 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21074 commit 516ad760db3553766267ada01b7d5d727faa4bbd
21075 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21076 Date: Sun Sep 23 02:17:08 2007 +0900
21078 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
21080 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21082 commit b02bad128669e567fce87d8df823b06a0144b8db
21083 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21084 Date: Sun Sep 23 02:12:30 2007 +0900
21086 sh: Update core code of SuperH.
21088 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21090 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
21091 Author: Wolfgang Denk <wd@denx.de>
21092 Date: Thu Sep 20 00:04:14 2007 +0200
21096 Signed-off-by: Wolfgang Denk <wd@denx.de>
21098 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
21099 Author: Wolfgang Denk <wd@denx.de>
21100 Date: Tue Sep 18 21:36:35 2007 +0200
21102 Avoid compiler warning.
21104 Signed-off-by: Wolfgang Denk <wd@denx.de>
21106 commit 8a783a65851bc7421ab69f442261215e21b8891a
21107 Author: Grant Likely <grant.likely@secretlab.ca>
21108 Date: Tue Sep 18 12:24:57 2007 -0600
21110 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
21112 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
21113 nulls in a string differently. For example, the following statement:
21114 echo "this is a string\0" > afile
21115 Will produce the following with /bin/bash:
21116 "this is a string\0"
21117 But with /bin/dash, will produce:
21120 Bug fixed by moving the embedded null out of the makefile and into the
21121 config header. Also renamed the macro to avoid usage colision with the same
21122 macro used by other board ports.
21124 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21126 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
21127 Author: Wolfgang Denk <wd@denx.de>
21128 Date: Tue Sep 18 17:40:27 2007 +0200
21130 MCC200: fix build warning
21132 The MCC200 board config file includes version.h for some customer-
21133 specific setting, which causes warnings with "make depend"; build
21134 version.h before depend.
21136 Signed-off-by: Wolfgang Denk <wd@denx.de>
21138 commit bd86220f58b99d6896198c385fda132f0c980915
21139 Author: Peter Pearse <peter.pearse@arm.com>
21140 Date: Tue Sep 18 13:07:54 2007 +0100
21142 Move coloured led API to status_led.h
21143 Improve indentation in drivers/at45.c
21145 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
21146 Author: Eirik Aanonsen <eaa@wprmedical.com>
21147 Date: Tue Sep 18 08:47:20 2007 +0200
21149 Update atstk1002 bootargs.
21151 Updates to atstk1002 U-Boot header file:
21152 - Changed bootargs:
21153 * Set the bootargs for at1002 to point to the SD-card partition instead
21154 * ... of the boot flash.
21155 * Removing the rootfstype since that argument are not needed.
21157 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
21158 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21160 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
21161 Author: Eirik Aanonsen <eaa@wprmedical.com>
21162 Date: Wed Sep 12 13:32:37 2007 +0200
21164 Add some comments to clocks in atstk1002.h
21166 This patch applies some clarifying comments to how the different
21167 clocks are setup according to atstk1002.h Some of the previous
21168 comments where stating wrongful information.
21170 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21172 commit 97213f32416ead885deafea86774e912ffd60ad0
21173 Author: David Saada <David.Saada@ecitele.com>
21174 Date: Mon Sep 17 17:04:47 2007 +0200
21176 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
21178 Signed-off-by: David Saada <david.saada@ecitele.com>
21180 commit 30363e98fa470fbecea5e8bc0f1443352754f303
21181 Author: Stefan Roese <sr@denx.de>
21182 Date: Mon Sep 17 08:20:47 2007 +0200
21184 Small whitespace cleanup of OneNAND patch
21186 Signed-off-by: Stefan Roese <sr@denx.de>
21188 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
21189 Author: Kyungmin Park <kmpark@infradead.org>
21190 Date: Mon Sep 10 17:15:14 2007 +0900
21192 OneNAND support (take #2)
21194 [PATCH 3/3] OneNAND support (take #2)
21196 OneNAND support at U-Boot
21198 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21200 commit 17aa2800457df0c06b41516f46f126712c196219
21201 Author: Kyungmin Park <kmpark@infradead.org>
21202 Date: Mon Sep 10 17:14:34 2007 +0900
21204 OneNAND support (take #2)
21206 [PATCH 2/3] OneNAND support (take #2)
21208 OneNAND support at U-Boot
21210 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21212 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
21213 Author: Kyungmin Park <kmpark@infradead.org>
21214 Date: Mon Sep 10 17:13:49 2007 +0900
21216 OneNAND support (take #2)
21218 [PATCH 1/3] OneNAND support (take #2)
21220 OneNAND support at U-Boot
21222 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21224 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
21225 Author: Michal Simek <monstr@monstr.eu>
21226 Date: Sun Sep 16 20:51:57 2007 +0200
21228 [FIX] remove files form repository
21230 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
21231 Author: Wolfgang Denk <wd@denx.de>
21232 Date: Sun Sep 16 17:10:04 2007 +0200
21234 TQM8xx[LM]: Fix broken environment alignment.
21236 With recent toolchains, the environment sectors were no longer aligned to
21237 sector boundaries. The reason was a combination of two bugs:
21239 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
21240 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
21241 this gets defined, is not included here (and cannot be included
21242 without causing lots of problems).
21244 Added a new #define CFG_USE_PPCENV for all boards which really
21245 want to put the environment is a ".ppcenv" section.
21247 2) The linker scripts just include environment.o, silently assuming
21248 that the objects in that file are really in the order in which
21249 they are coded in the C file, i. e. "environment" first, then
21250 "redundand_environment", and "env_size" last. However, current
21251 toolchains (GCC-4.x) reorder the objects, causing the environment
21252 data not to start on a flash sector boundary:
21254 Instead of: we got:
21256 40008000 T environment 40008000 T env_size
21257 4000c000 T redundand_environment 40008004 T redundand_environment
21258 40010000 T env_size 4000c004 T environment
21260 Note: this patch fixes just the first part, and cures the alignment
21261 problem by making sure that "env_size" gets placed correctly. However,
21262 we still have a potential issue because primary and redundant
21263 environment sectors are actually swapped, i. e. we have now:
21265 40008000 T redundand_environment
21266 4000c000 T environment
21267 40010000 T env_size
21269 This shall be fixed in the next version.
21271 Signed-off-by: Wolfgang Denk <wd@denx.de>
21273 commit eb6da8050797c204c9d010548424186c7ce32fc1
21274 Author: Wolfgang Denk <wd@denx.de>
21275 Date: Sun Sep 16 02:39:35 2007 +0200
21277 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
21279 Signed-off-by: Wolfgang Denk <wd@denx.de>
21281 commit cd2d1602c54cc6957bdef3872272a4b264893960
21282 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
21283 Date: Mon Sep 10 14:54:56 2007 -0400
21287 Fixup for the break statement in wrong place.
21289 [Patch by urwithsughosh@gmail.com]
21290 Acked-by: Andy Fleming <afleming@freescale.com>
21291 Signed-off-by: Wolfgang Denk <wd@denx.de>
21293 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
21294 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21295 Date: Tue Sep 11 17:04:00 2007 +0200
21297 Fix do_div() usage in nand process output
21299 Fix usage of do_div() in nand erase|read|write process output.
21301 The last patch to nand_util.c introduced do_div() instead of libgcc's
21302 implementation. But do_div() returns the quotient in its first
21303 macro parameter and not as result.
21305 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21307 commit c750d2e6692a000a82f29de7bf24e3dc21239161
21308 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21309 Date: Wed Sep 12 12:36:53 2007 +0200
21311 NAND: Add CFG_NAND_QUIET option
21313 This config option sets the default for the progress information
21314 output behavior that can also be configured through the 'quiet'
21315 environment variable.
21317 The legacy NAND code does not print the current progress info
21318 on the console. So this option is for backward compatibility for
21319 units that are in the field and where setting the quiet variable
21320 is not an option. With CFG_NAND_QUIET set to '1' the console
21321 progress info is turned off. This can still be overwritten
21322 through the environment variable.
21324 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
21326 commit dcb88630290d2bcd803386dd4c2be73142994c4f
21327 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
21328 Date: Thu Sep 13 16:06:05 2007 -0700
21330 ColdFire: fix build error becasue of bad type of mii_init()
21332 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
21334 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
21335 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
21336 Date: Thu Sep 13 16:04:05 2007 -0700
21338 ColdFire: Fix build error caused by pixis.c
21340 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
21342 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
21344 commit e21659e30660a1377c42af135a6114efe39801d9
21345 Author: Sam Sparks <SSparks@twacs.com>
21346 Date: Fri Sep 14 11:14:42 2007 -0600
21348 Update MPC8349ITX*_config to place config.tmp in right place.
21350 MPC834ITX*_config does not store config.tmp at the correct locatation,
21351 causing MPC8349ITXGP to have the wrong TEXT_BASE.
21353 Signed-off-by: Sam Sparks <SSparks@twacs.com>
21354 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21356 commit 1218abf1b5817a39a82399b4b928b00750575bda
21357 Author: Wolfgang Denk <wd@denx.de>
21358 Date: Sat Sep 15 20:48:41 2007 +0200
21360 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
21362 Signed-off-by: Wolfgang Denk <wd@denx.de>
21364 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
21365 Author: Dirk Behme <dirk.behme@googlemail.com>
21366 Date: Sat Sep 15 11:55:42 2007 +0200
21368 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
21370 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
21373 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
21375 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
21377 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
21378 Author: Michal Simek <monstr@monstr.eu>
21379 Date: Sat Sep 15 00:03:35 2007 +0200
21381 Synchronize with U-BOOT mainline
21383 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
21384 Author: Sam Sparks <SSparks@twacs.com>
21385 Date: Fri Sep 14 11:14:42 2007 -0600
21387 Update MPC8349ITX*_config to place config.tmp in right place.
21389 MPC834ITX*_config does not store config.tmp at the correct locatation,
21390 causing MPC8349ITXGP to have the wrong TEXT_BASE.
21392 Signed-off-by: Sam Sparks <SSparks@twacs.com>
21393 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21394 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21396 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
21397 Author: Bartlomiej Sieka <tur@semihalf.com>
21398 Date: Thu Sep 13 18:21:48 2007 +0200
21400 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
21402 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21404 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
21405 Author: Bartlomiej Sieka <tur@semihalf.com>
21406 Date: Thu Sep 13 16:33:59 2007 +0200
21408 tqm5200: Restore customary env. variable boot commands for powerpc kernels
21410 - update default definitions of kernel_addr and fdt_addr env. variables
21411 - make arch/powerpc booting the default scenario
21412 - update MTD partition layout to match the above
21414 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
21416 commit f34024d4a328e6edd906456da98d2c537155c4f7
21417 Author: Wolfgang Denk <wd@denx.de>
21418 Date: Wed Sep 12 00:48:57 2007 +0200
21420 Fix memory corruption problem on STX GP3 SSA Board.
21422 Signed-off-by: Wolfgang Denk <wd@denx.de>
21424 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
21425 Author: Peter Pearse <peter.pearse@arm.com>
21426 Date: Tue Sep 11 15:35:01 2007 +0100
21430 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
21431 Author: Grzegorz Bernacki <gjb@semihalf.com>
21432 Date: Tue Sep 11 15:42:11 2007 +0200
21434 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
21435 scan on second pci bus.
21437 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
21439 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
21440 Author: Grzegorz Bernacki <gjb@semihalf.com>
21441 Date: Tue Sep 11 12:57:52 2007 +0200
21443 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
21445 Bamboo has a file sdram.c which needs special treatment when building in
21446 separate directory. It has to be linked to build directory otherwise it is
21449 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
21451 commit d45963854eff39d575124d859419bb4953ce2c87
21452 Author: Michal Simek <monstr@monstr.eu>
21453 Date: Tue Sep 11 00:37:04 2007 +0200
21455 [FIX] Microblaze ML401 - repare FLASH handling
21457 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
21458 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
21459 Date: Mon Sep 10 16:55:59 2007 +0100
21461 Allocate CPU Architecture Code for STMicroelectronics' ST200.
21463 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
21464 ---------------------------------------------------
21466 commit 754bac48156f8958d8f6a53a51eda88ab5758929
21467 Author: Wolfgang Denk <wd@denx.de>
21468 Date: Mon Sep 10 20:42:31 2007 +0200
21470 Update version to match current state.
21472 Signed-off-by: Wolfgang Denk <wd@denx.de>
21474 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
21475 Author: Grzegorz Bernacki <gjb@semihalf.com>
21476 Date: Mon Sep 10 17:39:08 2007 +0200
21478 [MPC512x] Streamline frame handling in the FEC driver
21480 - convert frame size settings to be derived from a single base
21481 - set frame size to the recommended default value
21483 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
21485 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
21486 Author: Kyungmin Park <kmpark@infradead.org>
21487 Date: Mon Sep 10 11:34:00 2007 +0900
21489 Remove compiler warning: target CPU does not support interworking
21491 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21493 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
21494 Author: Wolfgang Denk <wd@denx.de>
21495 Date: Sun Sep 9 21:21:33 2007 +0200
21497 Fix compile error in spc1920 config.
21499 Signed-off-by: Markus Klotzbücher <mk@denx.de>
21500 Signed-off-by: Wolfgang Denk <wd@denx.de>
21502 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
21503 Author: Grant Likely <grant.likely@secretlab.ca>
21504 Date: Fri Sep 7 09:25:07 2007 -0600
21506 Bugfix: make bootm+libfdt compile on boards with no flash
21508 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21510 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
21511 Author: Grzegorz Bernacki <gjb@semihalf.com>
21512 Date: Fri Sep 7 18:35:37 2007 +0200
21514 [PPC440SPe] PCIe environment settings for Katmai and Yucca
21516 - 'pciconfighost' is set by default in order to be able to scan bridges
21517 behind the primary host/PCIe
21519 - 'pciscandelay' env variable is recognized to allow for user-controlled
21520 delay before the PCIe bus enumeration; some peripheral devices require a
21521 significant delay before they can be scanned (e.g. LSI8408E); without the
21522 delay they are not detected
21524 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
21526 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
21527 Author: Grzegorz Bernacki <gjb@semihalf.com>
21528 Date: Fri Sep 7 18:20:23 2007 +0200
21530 [PPC440SPe] Improve PCIe configuration space access
21532 - correct configuration space mapping
21533 - correct bus numbering
21534 - better access to config space
21536 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
21537 first device on the first bus. We now allow to configure up to 16 buses;
21538 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
21539 peripheral devices farther in hierarchy can be identified.
21541 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
21543 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
21544 Author: Grzegorz Bernacki <gjb@semihalf.com>
21545 Date: Fri Sep 7 17:46:18 2007 +0200
21547 [PPC440SPe] Convert machine check exceptions handling
21549 Convert using fixup mechanism to suppressing MCK for the duration of config
21550 read/write transaction: while fixups work fine with the case of a precise
21551 exception, we identified a major drawback with this approach when there's
21552 an imprecise case. In this scenario there is the following race condition:
21553 the fixup is (by design) set to catch the instruction following the one
21554 actually causing the exception; if an interrupt (e.g. decrementer) happens
21555 between those two instructions, the ISR code is executed before the fixup
21556 handler the machine check is no longer protected by the fixup handler as it
21557 appears as within the ISR code. In consequence the fixup approach is being
21558 phased out and replaced with explicit suppressing of MCK during a PCIe
21559 config read/write cycle.
21561 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
21563 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
21564 Author: Wolfgang Denk <wd@denx.de>
21565 Date: Fri Sep 7 17:43:36 2007 +0200
21567 Fix typo in MAKEALL script.
21569 Signed-off-by: Wolfgang Denk <wd@denx.de>
21571 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
21572 Author: Grzegorz Bernacki <gjb@semihalf.com>
21573 Date: Fri Sep 7 17:09:21 2007 +0200
21575 [MPC512x] Proper handling of larger frames in the FEC driver
21577 When frame larger than local RX buffer is received, it is split and handled
21578 by two buffer descriptors. Prior to this patch the FEC driver discarded
21579 contents of a buffer descriptor without the 'LAST' bit set, so the first
21580 part of the frame was lost in case of larger frames. This fix allows to
21581 safely combine the two pieces into the whole frame.
21583 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
21585 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
21586 Author: Rafal Jaworowski <raj@semihalf.com>
21587 Date: Fri Sep 7 17:05:36 2007 +0200
21589 [MPC512x] Correct fixup relocation
21591 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
21593 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
21594 Author: Wolfgang Denk <wd@denx.de>
21595 Date: Fri Sep 7 01:21:25 2007 +0200
21597 Update CHANGELOG, minor coding style cleanup.
21599 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
21600 Author: stefano babic <sbabic@denx.de>
21601 Date: Thu Aug 30 23:01:49 2007 +0200
21603 PXA270: Added support for TrizepsIV board.
21605 This patch add support for the Trizeps IV module (520Mhz).
21607 Signed-off-by: Stefano Babic <sbabic@denx.de>
21609 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
21610 Author: stefano babic <sbabic@denx.de>
21611 Date: Thu Aug 30 22:57:04 2007 +0200
21613 PXA270: Add support for multiple serial ports.
21615 This patch adds support for multiple serial ports to the PXA target.
21616 FFUART, BTUART and STUART are supported.
21618 Signed-off-by: Stefano Babic <sbabic@denx.de>
21620 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
21621 Author: stefano babic <sbabic@denx.de>
21622 Date: Thu Aug 30 22:48:47 2007 +0200
21624 PXA270: fix compile issue (invalid lvalue)
21626 Code is broken for PXA270 due to "invalid lvalue in assignment".
21628 This patch fix it in pxa-regs.h
21630 Signed-off-by: Stefano Babic <sbabic@denx.de>
21632 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
21633 Author: Jason Jin <Jason.jin@freescale.com>
21634 Date: Thu Aug 30 18:19:05 2007 +0800
21636 Add BUILD_DIR support for bios emulator.
21638 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
21640 commit b4d8a55145442f136982634862341a3e02002bda
21641 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
21642 Date: Fri Aug 31 14:41:51 2007 +0900
21644 [MIPS] Remove inline asm string functions
21646 Stop using inline string functions on MIPS as other ARCHs do so,
21647 since the optimized inline asm versions are not small.
21649 This change is triggered by a following MIPS build error:
21650 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
21651 common/exports.c:32: undefined reference to `strcmp'
21652 make: *** [u-boot] Error 1
21654 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
21656 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
21657 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
21658 Date: Fri Aug 31 14:41:45 2007 +0900
21660 [MIPS] Update asm string header
21662 This patches contains several bugfixes and cleanups in the latest upstream:
21664 - Don't include linux/config.h
21665 - Remove buggy inline version of memscan.
21666 - Merge with Linux 2.6.11-rc3.
21667 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
21668 - Goodbye mips64. 31704 lines of code bite the dust.
21669 - Replace extern inline with static inline.
21670 - Fix return value of strncpy.
21671 - Remove a bunch more "$1" clobbers.
21673 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
21675 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
21676 Author: Bartlomiej Sieka <tur@semihalf.com>
21677 Date: Tue Sep 4 17:31:22 2007 +0200
21679 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
21681 Fix incorrect blob address calculation in do_bootm_linux() that prevents
21682 booting the kernel from a multi-file image (kernel + initrd + blob).
21684 Also, make minor updates to the U-Boot's output and to the coding style.
21686 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
21688 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
21689 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
21690 Date: Fri Aug 31 14:29:04 2007 +0200
21692 Add support for Sil680 IDE controller.
21694 o add drivers/sil680.c to support the Sil680 IDE-controller.
21695 o drivers/Makefile: add sil680.o.
21697 Signed-off-by: Gary Jennejohn <garyj@denx.de>
21699 commit e79021223bc339df655e360645a52c457a74b067
21700 Author: Grant Likely <grant.likely@secretlab.ca>
21701 Date: Thu Sep 6 09:47:40 2007 -0600
21703 bootm/fdt: Only process the fdt if an fdt address was provided
21705 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
21706 kernels using the board info structure (instead of passing a device tree)
21707 This change allows the old style booting to be used if the fdt argument
21708 was not passed to 'bootm'.
21710 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21711 Acked-by: Kim Phillips <kim.phillips@freescale.com>
21713 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
21714 Author: Grant Likely <grant.likely@secretlab.ca>
21715 Date: Thu Sep 6 09:46:23 2007 -0600
21717 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
21719 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
21721 Tested on: lite5200b
21723 Note: the fixup functions have not been moved to a common place. This
21724 patch is targeted for immediate merging as in solves a build issue, but
21725 the final name/location of the fixups is still subject to debate. I
21726 propose to merge this now, and move the fixups in the next merge window
21727 to be usable by all targets.
21729 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21731 commit 41bb76e941929f54a73206fb132f7a4c275543a3
21732 Author: Grant Likely <grant.likely@secretlab.ca>
21733 Date: Thu Sep 6 09:46:17 2007 -0600
21735 libfdt: add convenience function fdt_find_and_setprop()
21737 Given the path to a node, fdt_find_and_setprop() allows a property value
21738 to be set directly.
21740 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21742 commit 80767a6cead9990d9e77e62be947843c2c72f469
21743 Author: Peter Pearse <peter.pearse@arm.com>
21744 Date: Wed Sep 5 16:04:41 2007 +0100
21746 Changed API name to coloured_led.h
21747 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
21748 Tidied other cpu/arm920t/start.S code
21750 commit 56a9270521baaa00e12639a978302a67f61ef060
21751 Author: Kumar Gala <galak@kernel.crashing.org>
21752 Date: Thu Aug 30 16:18:18 2007 -0500
21754 Fix ULI RTC support on MPC8544 DS
21756 The RTC on the M1575 ULI chipset requires a dummy read before
21757 we are able to talk to the RTC. We accomplish this by adding a
21758 second memory region to the PHB the ULI is on and read from it.
21760 The second region is added to maintain compatiabilty with Linux's
21761 view of the PCI memory map.
21763 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21765 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
21766 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
21767 Date: Thu Aug 30 01:58:48 2007 -0500
21769 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
21771 pcie is now differentiated from pci. Add 8641 bus-range updates.
21773 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
21775 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
21776 Author: Peter Pearse <peter.pearse@arm.com>
21777 Date: Tue Sep 4 16:18:38 2007 +0100
21779 Add coloured led interface for ARM boards.
21780 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
21782 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
21783 Author: Peter Pearse <peter.pearse@arm.com>
21784 Date: Tue Sep 4 14:49:28 2007 +0100
21786 Move include/led.h to board/at91rm9200dk
21788 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
21789 Author: Peter Pearse <peter.pearse@arm.com>
21790 Date: Tue Sep 4 14:25:51 2007 +0100
21792 Ran Lindent on drivers/at45.c
21794 commit 557ab89d294f08dd532f21d19861b40093200a33
21795 Author: Peter Pearse <peter.pearse@arm.com>
21796 Date: Tue Sep 4 14:23:50 2007 +0100
21798 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
21800 commit 81b73dec16fd1227369a191e725e10044a9d56b8
21801 Author: Gary Jennejohn <garyj@denx.de>
21802 Date: Fri Aug 31 15:21:46 2007 +0200
21804 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
21806 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
21807 set to non-zero, because it doesn't support MRM (memory-read-
21808 multiple) correctly. We now added the possibility to configure
21809 this register in the board config file, so that the default value
21810 of 8 can be overridden.
21812 Here the details of this patch:
21814 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
21815 board-specific settings. As an example the sequoia board requires 0.
21816 Idea from Stefan Roese <sr@denx.de>.
21817 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
21818 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
21819 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
21820 CFG_PCI_CACHE_LINE_SIZE to 0.
21822 Signed-off-by: Gary Jennejohn <garyj@denx.de>
21823 Signed-off-by: Stefan Roese <sr@denx.de>
21825 commit 60174746c668b309378a91488dded898e9553eae
21826 Author: Wolfgang Denk <wd@denx.de>
21827 Date: Fri Aug 31 10:01:51 2007 +0200
21829 Fix TFTP OACK code for short packets.
21831 The old code had a loop limit overflow bug which caused a semi-
21832 infinite loop for small packets, because in "i<len-8", "i" was signed,
21833 but "len" was unsigned, and "len-8" became a huge number for small
21836 This is a workaround which replaces broken commit 8f1bc284.
21838 Signed-off-by: Wolfgang Denk <wd@denx.de>
21840 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
21841 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
21842 Date: Thu Aug 30 15:03:05 2007 +0200
21844 Reduce BOOTDELAY variable to 1 second by default for STK1002
21846 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
21847 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21849 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
21850 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
21851 Date: Thu Aug 30 15:03:04 2007 +0200
21853 Remove double quotation marks around MAC address for STK1002
21855 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
21856 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
21858 commit ff13ac8c7bbebb238e339592de765c546dba1073
21859 Author: Wolfgang Denk <wd@denx.de>
21860 Date: Thu Aug 30 14:42:15 2007 +0200
21862 Backout commit 8f1bc284 as it causes TFTP to fail.
21864 Signed-off-by: Wolfgang Denk <wd@denx.de>
21866 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
21867 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
21868 Date: Thu Aug 30 02:26:17 2007 -0500
21870 Revert "Fix MPC8544DS PCIe3 scsi."
21872 This reverts commit 9468e680.
21873 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
21875 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
21877 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
21878 Author: Grant Likely <grant.likely@secretlab.ca>
21879 Date: Wed Aug 29 18:26:24 2007 -0600
21881 tftp: don't implicity trust the format of recevied packets
21883 The TFTP OACK code trusts that the incoming packet is formated as
21884 ASCII text and can be processed by string functions. It also has a
21885 loop limit overflow bug where if the packet length is less than 8, it
21886 ends up looping over *all* of memory to find the 'blksize' string.
21888 This patch solves the problem by forcing the packet to be null
21889 terminated and using strstr() to search for the sub string.
21891 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
21893 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
21894 Author: Stefan Roese <sr@denx.de>
21895 Date: Wed Aug 29 16:31:18 2007 +0200
21897 ppc4xx: Change lwmon5 default environment to support Linux RTC
21899 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
21900 to supply the RTC I2C address as bootline parameter. This patch
21901 adds support for this rtc probing parameter to the bootargs:
21903 "rtc-pcf8563.probe=0,0x51"
21905 Signed-off-by: Stefan Roese <sr@denx.de>
21907 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
21908 Author: Kim Phillips <kim.phillips@freescale.com>
21909 Date: Wed Aug 29 09:06:05 2007 -0500
21911 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
21913 this had slipped through the cracks, since the sbc board was added
21914 after I wrote the original patch to remove all these symbols, and
21915 before it was merged.
21917 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
21919 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
21920 Author: Wolfgang Denk <wd@denx.de>
21921 Date: Wed Aug 29 14:05:30 2007 +0200
21923 Add mii_init() prototype
21925 to get rid of a *lot* of compiler warnings.
21927 Signed-off-by: Wolfgang Denk <wd@denx.de>
21929 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
21930 Author: Wolfgang Denk <wd@denx.de>
21931 Date: Wed Aug 29 13:35:03 2007 +0200
21933 Disable network support on cmi_mpc5xx board
21935 ..because it caused compiler errors and there seems to be no
21936 board maintainer to take care of this.
21938 Signed-off-by: Wolfgang Denk <wd@denx.de>
21940 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
21941 Author: Kumar Gala <galak@kernel.crashing.org>
21942 Date: Mon Aug 20 09:44:00 2007 -0500
21944 Fix MPC8544DS PCIe3 scsi.
21946 <ed.swarthout@freescale.com>
21948 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
21949 is allocating memory space it doesn't need.
21951 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
21952 Signed-off-by: Andy Fleming <afleming@freescale.com>
21954 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
21955 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
21956 Date: Tue Aug 21 09:38:59 2007 -0500
21960 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
21961 correct consoledev needed for linux boot.
21962 Standardize on fdt{file,addr} var to hold dtb file name.
21964 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
21966 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
21968 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
21969 Author: Haiying Wang <Haiying.Wang@freescale.com>
21970 Date: Thu Aug 23 15:20:54 2007 -0400
21972 Enable L2 cache for MPC8568MDS board
21974 The L2 cache size is 512KB for 8568, print out the correct informaiton.
21976 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
21978 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
21979 Author: Jason Jin <Jason.jin@freescale.com>
21980 Date: Wed Aug 22 17:54:49 2007 +0800
21982 Remove the bios emulator binary files from MAI board
21984 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
21986 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
21987 Author: Kim Phillips <kim.phillips@freescale.com>
21988 Date: Tue Aug 21 17:00:17 2007 -0500
21990 support board vendor-common makefiles
21992 if a board/$(VENDOR)/common/Makefile exists, build it.
21994 also add the first such case, board/freescale/common/Makefile, to
21995 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
21996 dictated by board configuration.
21998 thusly get rid of alternate build dir errors such as:
22000 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
22002 by putting the common/ mkdir command in its proper place (the common
22003 Makefile). Common bits from existing individual board Makefiles have
22006 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22008 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
22009 Author: stefano babic <sbabic@denx.de>
22010 Date: Tue Aug 21 15:52:33 2007 +0200
22012 Fix: TFTP is not working on little endian systems
22014 TFTP does not work anymore after multicast tftp
22015 patch was applied on little endian systems.
22018 Signed-off-by: Stefano Babic <sbabic@denx.de>
22020 commit 5f470948570526e9186f053a3003da7719604e90
22021 Author: stefano babic <sbabic@denx.de>
22022 Date: Tue Aug 21 15:50:33 2007 +0200
22024 Fix MAC address setting in DM9000 driver.
22026 The logic to check if there is a correct MAC address in the DM9000
22027 EEPROM, added in the last patch, is wrong. Now the MAC address is
22028 always taken from the environment, even if a suitable MAC is present
22031 Signed-off-by: Stefano Babic <sbabic@denx.de>
22033 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
22034 Author: Martin Krause <martin.krause@tqs.de>
22035 Date: Tue Aug 21 12:40:34 2007 +0200
22037 MPC5xxx: fix some compiler warnings in USB code
22039 Fix the following warnings:
22040 - usb.c:xx: warning: function declaration isn't a prototype
22041 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
22042 from pointer wihtout a cast
22044 Signed-off-by: Martin Krause <martin.krase@tqs.de>
22046 commit 16e23c3f5dab6937f5109365416808c7f15c122b
22047 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
22048 Date: Mon Aug 20 23:55:33 2007 -0500
22050 fsl_pci_init - Remove self PCSRBAR allocation
22052 CPU physical address space was being wasted by allocating a
22053 PCSRBAR PCI inbound region to it's memory space.
22055 As a rule, PCSRBAR should be left alone since it does not affect
22056 transactions from self and other masters may have changed it.
22058 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
22060 commit 0e700ce03a23bb1921149bc77008ace7103d5289
22061 Author: Martin Krause <martin.krause@tqs.de>
22062 Date: Mon Aug 20 13:56:47 2007 +0200
22064 Fix compiler warning in include/s3c2410.h
22066 This patch fixes the "type qualifiers ignored on fuction return tpye"
22067 warning for include/s3c2410.h
22069 Signed-off-by: Martin Krause <martin.krause@tqs.de>
22071 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
22072 Author: Dirk Behme <dirk.behme@googlemail.com>
22073 Date: Mon Aug 20 07:09:05 2007 +0200
22075 Fix compilation error for omap2420h4_config.
22077 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
22078 and flash_probe() calls in env_flash.c.
22080 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
22082 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
22083 Author: Kim Phillips <kim.phillips@freescale.com>
22084 Date: Fri Aug 10 14:34:14 2007 -0500
22086 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
22088 and make some minor corrections to the FDT part of the README.
22090 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22092 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
22093 Author: Wolfgang Denk <wd@denx.de>
22094 Date: Wed Aug 29 01:32:05 2007 +0200
22096 Minor coding style cleanup.
22098 Signed-off-by: Wolfgang Denk <wd@denx.de>
22100 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
22101 Author: Heiko Schocher <hs@pollux.denx.de>
22102 Date: Tue Aug 28 17:40:33 2007 +0200
22104 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
22106 Signed-off-by: Heiko Schocher <hs@denx.de>
22108 commit f98984cb194bb34dbe1db9429d3b51133af30d07
22109 Author: Heiko Schocher <hs@pollux.denx.de>
22110 Date: Tue Aug 28 17:39:14 2007 +0200
22112 IDE: - make ide_inb () and ide_outb () "weak", so boards can
22113 define there own I/O functions.
22114 (Needed for the pcs440ep board).
22115 - The default I/O Functions are again 8 Bit accesses.
22116 - Added CONFIG_CMD_IDE for the pcs440ep Board.
22118 Signed-off-by: Heiko Schocher <hs@denx.de>
22120 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
22121 Author: Semih Hazar <semih.hazar@indefia.com>
22122 Date: Mon Aug 20 19:00:01 2007 +0300
22124 AVR32: Change prototype of memset
22126 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
22127 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22129 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
22130 Author: Yuri Tikhonov <yur@emcraft.com>
22131 Date: Sat Aug 25 05:07:16 2007 +0200
22133 POST: limit memory test area to not touch global data anymore
22135 As experienced on lwmon5, on some boards the POST memory test can
22136 corrupt the global data buffer (bd). This patch fixes this issue
22137 by checking and limiting this area.
22139 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
22140 Signed-off-by: Stefan Roese <sr@denx.de>
22142 commit 75e1a84d483e36be10e206e539b028c4889e1158
22143 Author: Stefan Roese <sr@denx.de>
22144 Date: Fri Aug 24 15:41:42 2007 +0200
22146 ppc4xx: Add RTC POST test to lwmon5 board configuration
22148 Since this RTC POST test is taking quite a while to complete
22149 it's only initiated upon special keypress same as the complete
22152 Signed-off-by: Stefan Roese <sr@denx.de>
22154 commit d7bfa620037a6d2210159387571bdf93aa32c162
22155 Author: Stefan Roese <sr@denx.de>
22156 Date: Fri Aug 24 15:19:10 2007 +0200
22158 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
22160 Signed-off-by: Stefan Roese <sr@denx.de>
22162 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
22163 Author: Stefan Roese <sr@denx.de>
22164 Date: Thu Aug 23 11:02:37 2007 +0200
22166 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
22168 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
22169 board. Now the "eeprom" command can be used to read/write from/to this
22170 device. Additionally a new command was added "eepromwp" to en-/disable
22171 the write-protect of this 2nd EEPROM.
22173 The 1st EEPROM is not affected by this write-protect command.
22175 Signed-off-by: Stefan Roese <sr@denx.de>
22177 commit c64fb30e4c5976007d56fc1789c7a0666082b536
22178 Author: Stefan Roese <sr@denx.de>
22179 Date: Wed Aug 22 08:56:09 2007 +0200
22181 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
22183 Signed-off-by: Stefan Roese <sr@denx.de>
22185 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
22186 Author: Stefan Roese <sr@denx.de>
22187 Date: Tue Aug 21 16:27:57 2007 +0200
22189 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
22191 This patch adds support for the matrix keyboard on the lwmon5 board.
22192 Since the implementation in the dsPCI is kind of compatible with the
22193 "old" lwmon board, most of the code is copied from the lwmon
22196 Signed-off-by: Stefan Roese <sr@denx.de>
22198 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
22199 Author: Wolfgang Denk <wd@denx.de>
22200 Date: Sun Aug 19 10:27:34 2007 +0200
22202 Fix some build errors.
22204 Signed-off-by: Wolfgang Denk <wd@denx.de>
22206 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
22207 Author: Wolfgang Denk <wd@denx.de>
22208 Date: Sat Aug 18 22:00:38 2007 +0200
22212 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
22213 Author: Kim Phillips <kim.phillips@freescale.com>
22214 Date: Thu Aug 16 22:52:39 2007 -0500
22216 lib_ppc: make board_add_ram_info weak
22218 platforms wishing to display RAM diagnostics in addition to size,
22219 can do so, on one line, in their own board_add_ram_info()
22222 this consequently eliminates CONFIG_ADD_RAM_INFO.
22224 Thanks to Stefan for the hint.
22226 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22228 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
22229 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
22230 Date: Fri Aug 17 12:43:44 2007 +0900
22232 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
22234 This patch has been sent on:
22237 Many users of PCI config read routines tend to ignore the function
22238 ret value, and are only concerned about the contents of *val. Based
22239 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
22240 the *val on dword read error.
22242 Without this fix, for example, we'll go on scanning bus with vendor or
22243 header_type uninitialized. This brings many unnecessary config trials.
22245 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
22247 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
22248 Author: Stefan Roese <sr@denx.de>
22249 Date: Sat Aug 18 14:37:52 2007 +0200
22251 ColdFire: Fix some remaining problems with CFG_CMD_
22253 Signed-off-by: Stefan Roese <sr@denx.de>
22255 commit 8280f6a1c43247616b68224675188e5ccd124650
22256 Author: Stefan Roese <sr@denx.de>
22257 Date: Sat Aug 18 14:33:02 2007 +0200
22259 Coding style cleanup
22261 Signed-off-by: Stefan Roese <sr@denx.de>
22263 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
22264 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22265 Date: Thu Aug 16 19:23:50 2007 -0500
22267 ColdFire: Add M5235EVB Platform for MCF523x
22269 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22271 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
22272 Author: Kim Phillips <kim.phillips@freescale.com>
22273 Date: Fri Aug 17 09:30:00 2007 -0500
22275 mpc83xx: fix typo in DDR2 programming
22277 introduced in the implement board_add_ram_info patch as I was cleaning out the
22278 magic numbers. sorry.
22280 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22282 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
22283 Author: Kim Phillips <kim.phillips@freescale.com>
22284 Date: Thu Aug 16 22:53:09 2007 -0500
22286 mpc83xx: move freescale boards to boards/freescale
22288 includes build fixes.
22290 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22292 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
22293 Author: Kim Phillips <kim.phillips@freescale.com>
22294 Date: Thu Aug 16 22:52:59 2007 -0500
22296 mpc83xx: suppress unused variable 'val8' warning
22298 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22300 commit bbea46f76f767b919070b4829bf34c86bd223248
22301 Author: Kim Phillips <kim.phillips@freescale.com>
22302 Date: Thu Aug 16 22:52:48 2007 -0500
22304 mpc83xx: implement board_add_ram_info
22306 add board_add_ram_info, to make memory diagnostic output more
22307 consistent. u-boot banner output now looks like:
22309 DRAM: 256 MB (DDR1, 64-bit, ECC on)
22311 and for boards with SDRAM on the local bus, a line such as this is
22314 SDRAM: 64 MB (local bus)
22316 also replaced some magic numbers with their equivalent define names.
22318 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22320 commit 14778585d1389d86d5846efec29e5fce892680ce
22321 Author: Tony Li <tony.li@freescale.com>
22322 Date: Fri Aug 17 10:35:59 2007 +0800
22324 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
22326 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
22327 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
22329 Signed-off-by Tony Li <tony.li@freescale.com>
22331 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
22332 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22333 Date: Thu Aug 16 15:05:11 2007 -0500
22335 ColdFire: Add M54455EVB for MCF5445x
22337 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22339 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
22340 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22341 Date: Thu Aug 16 13:20:50 2007 -0500
22343 ColdFire: Add M5253EVBE platform for MCF52x2
22345 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22347 commit a605aacd8324094199402816cc6d9124aba57b8d
22348 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22349 Date: Thu Aug 16 05:04:31 2007 -0500
22351 ColdFire: Add M5249EVB platform for MCF52x2
22353 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22355 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
22356 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22357 Date: Wed Aug 15 20:32:06 2007 -0500
22359 ColdFire: Update Freescale MCF52x2 platforms
22361 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22363 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
22364 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22365 Date: Wed Aug 15 19:55:10 2007 -0500
22367 ColdFire: Update EB+MCF-EV123 platform
22369 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22371 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
22372 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22373 Date: Wed Aug 15 19:46:38 2007 -0500
22375 ColdFire: update TASREG platform for MCF52x2
22377 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22379 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
22380 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22381 Date: Wed Aug 15 19:45:51 2007 -0500
22383 ColdFire: update r5200 platform for MCF52x2
22385 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22387 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
22388 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22389 Date: Wed Aug 15 19:43:20 2007 -0500
22391 ColdFire: idmr platform MCF52x2 update
22393 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22395 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
22396 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22397 Date: Wed Aug 15 19:41:06 2007 -0500
22399 ColdFire: cobra5272 platform for MCF52x2 update
22401 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22403 commit 56115665b4a64c10c01440c57749b265e0908fa4
22404 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22405 Date: Wed Aug 15 19:38:15 2007 -0500
22407 ColdFire: MCF52x2 Header files update
22409 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22411 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
22412 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22413 Date: Wed Aug 15 19:21:21 2007 -0500
22415 ColdFire: MCF52x2 update
22417 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22419 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
22420 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22421 Date: Wed Aug 15 18:46:11 2007 -0500
22423 ColdFire: MCF5329 update cache
22425 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22427 commit 7171977fb8fd77cfb6676953fa9a05789c450513
22428 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22429 Date: Wed Aug 15 15:40:20 2007 -0500
22431 ColdFire: MCF5329 header file clean up
22433 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22435 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
22436 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22437 Date: Wed Aug 15 15:39:17 2007 -0500
22439 ColdFire: MCF5329 Update and cleanup
22441 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22443 commit 10327dc5541f947c0cf7e31fef86c4706169607a
22444 Author: Andy Fleming <afleming@freescale.com>
22445 Date: Thu Aug 16 16:35:02 2007 -0500
22447 Add CONFIG_HAS_ETH0 to all boards with TSEC
22449 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
22450 to update TSEC1's device-tree node, so we need to add it
22451 to all the boards with TSECs. Do this for 83xx and 86xx, too,
22452 since they will eventually do something similar.
22454 Signed-off-by: Andy Fleming <afleming@freescale.com>
22456 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
22457 Author: Kumar Gala <galak@kernel.crashing.org>
22458 Date: Thu Aug 16 15:05:04 2007 -0500
22460 Update MPC8544 DS PCI memory map
22462 The PCIe bus that the ULI M1575 is connected to has no possible way of
22463 needing more than the fixed amount of IO & Memory space needed by the ULI.
22465 So make it use far less IO & memory space and have it use the shared LAW. This
22466 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
22469 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22471 commit ea5877e31ed63ade948fd1293895ec23fe01472e
22472 Author: Kumar Gala <galak@kernel.crashing.org>
22473 Date: Thu Aug 16 11:01:21 2007 -0500
22475 Fix up some fdt issues on 8544DS
22477 It looks like we had a merge issue that duplicated a bit of code
22478 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
22479 the MAC address properly set in the device tree on boot for TSEC1
22481 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22483 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
22484 Author: Niklaus Giger <niklaus.giger@netstal.com>
22485 Date: Thu Aug 16 15:16:03 2007 +0200
22487 PPC4xx:HCU4/5 cleanup
22489 Minor cleanups to confirm to the u-boot coding style.
22490 Some german expressions -> english.
22491 HCU5 enforces a unique IP adress for a given slot in the rack.
22493 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
22495 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
22496 Author: Niklaus Giger <niklaus.giger@netstal.com>
22497 Date: Thu Aug 16 15:16:02 2007 +0200
22499 PPC4xx:HCU4/5 cleanup ecc/sdram init
22501 Make ecc initialisation robust, as DDR2-ECC errors may be generated
22502 while zeroing the RAM.
22504 Return 16 bytes (a cacheline) less than the available memory, as the
22505 board and/or PPC440EPx might have problems accessing the last bytes.
22507 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
22509 commit d35b508a55508535b6e8445b718585d27df733d3
22510 Author: Kim Phillips <kim.phillips@freescale.com>
22511 Date: Wed Aug 15 22:29:56 2007 -0500
22513 fdt: suppress unused variable 'bd' warning
22515 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22517 commit 82bd9ee77490588d4da785d75829ca63d0176baf
22518 Author: Andy Fleming <afleming@freescale.com>
22519 Date: Wed Aug 15 20:06:50 2007 -0500
22521 Fix warnings from of_data copy fix
22523 Forgot to cast of_flat_tree to ulong.
22525 Signed-off-by: Andy Fleming <afleming@freescale.com>
22527 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
22528 Author: Andy Fleming <afleming@freescale.com>
22529 Date: Wed Aug 15 20:03:44 2007 -0500
22531 Don't wait for disconnected TSECs
22533 The TSEC driver's PHY code waits a long time for autonegotiation to
22534 complete, even if the link is down. The PHY knows the link is
22535 down or up before autonegotiation completes, so we can short-circuit
22536 the process if the link is down.
22538 Signed-off-by: Andy Fleming <afleming@freescale.com>
22540 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
22541 Author: Andy Fleming <afleming@freescale.com>
22542 Date: Wed Aug 15 20:03:34 2007 -0500
22544 Fix numerous bugs in the 8568 UEC support
22546 Actually, fixed a large bug in the UEC for *all* platforms.
22547 How did this ever work?
22549 uec_init() did not follow the spec for eth_init(), and returned
22550 0 on success. Switch it to return the link like tsec_init()
22553 The immap for the 8568 was defined based on MPC8568, rather than
22558 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
22560 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
22563 Signed-off-by: Andy Fleming <afleming@freescale.com>
22565 commit 3a79013e2adda53332dfd0b511066a805e929a9d
22566 Author: Andy Fleming <afleming@freescale.com>
22567 Date: Wed Aug 15 20:03:25 2007 -0500
22569 Define tsec flag values in config files
22571 The tsec_info structure and array has a "flags" field for each
22572 ethernet controller. This field is the only reason there are
22573 settings. Switch to defining TSECn_FLAGS for each controller
22574 in the config header, and we can greatly simplify the array, and
22575 also simplify the addition of future boards.
22577 Signed-off-by: Andy Fleming <afleming@freescale.com>
22579 commit ec7238229507e7f47533a611ea8c53319d234cf3
22580 Author: Andy Fleming <afleming@freescale.com>
22581 Date: Wed Aug 15 20:03:13 2007 -0500
22583 Add support for building all boards with a TSEC
22585 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
22586 Now we can do a MAKEALL test on all of them!
22588 Signed-off-by: Andy Fleming <afleming@freescale.com>
22590 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
22591 Author: Andy Fleming <afleming@freescale.com>
22592 Date: Wed Aug 15 17:30:56 2007 -0500
22594 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
22596 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
22597 neglected to *also* put the code inside the similar #ifdef
22598 for CONFIG_OF_FLAT_TREE.
22600 Signed-off-by: Andy Fleming <afleming@freescale.com>
22602 commit 78f9fef7f406078c8bf7191e665a73f795157746
22603 Author: Scott Wood <scottwood@freescale.com>
22604 Date: Wed Aug 15 15:46:46 2007 -0500
22606 mpc885ads: Don't define CONFIG_BZIP2.
22608 bzip2 requires a significant chunk of malloc space, and there isn't
22609 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
22610 and a downloaded image at 0x400000.
22612 Signed-off-by: Scott Wood <scottwood@freescale.com>
22614 commit 002275a3ed8b114885f6702d6d544d0780dfe689
22615 Author: Michal Simek <Monstr@seznam.cz>
22616 Date: Thu Aug 16 08:54:10 2007 +0200
22618 Bios emulator - fix microblaze toolchain problem
22620 microblaze CPU have problem with bios_emulator code.
22621 Microblaze toolchain doesn't support PRAGMA PACK.
22623 Signed-off-by: Michal Simek <monstr@monstr.eu>
22625 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
22626 Author: Wolfgang Denk <wd@denx.de>
22627 Date: Thu Aug 16 11:51:04 2007 +0200
22629 Minor Coding Style fix; Update CHANGELOG file.
22631 Signed-off-by: Wolfgang Denk <wd@denx.de>
22633 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
22634 Author: Stefan Roese <sr@denx.de>
22635 Date: Thu Aug 16 11:21:49 2007 +0200
22637 ppc4xx: Remove #warning in esd auto_update.c
22639 Signed-off-by: Stefan Roese <sr@denx.de>
22641 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
22642 Author: Stefan Roese <sr@denx.de>
22643 Date: Fri Jun 22 17:32:28 2007 +0200
22645 ppc7xx: Update CPCI750 board
22647 This small CPCI750 update extends the board specific command
22648 "show_config" to display the Marvell strapping registers and
22649 extends the PCI IDE controller.
22651 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
22652 Signed-off-by: Stefan Roese <sr@denx.de>
22654 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
22655 Author: Michal Simek <monstr@monstr.eu>
22656 Date: Thu Aug 16 10:46:28 2007 +0200
22658 [FIX] Changes for bios_emulator code for others architecture
22660 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
22661 Author: Michal Simek <monstr@monstr.eu>
22662 Date: Thu Aug 16 10:45:09 2007 +0200
22664 [FIX] Remove unused include file
22666 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
22667 Author: Stefan Roese <sr@denx.de>
22668 Date: Thu Aug 16 10:18:33 2007 +0200
22670 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
22672 Signed-off-by: Stefan Roese <sr@denx.de>
22674 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
22675 Author: Stefan Roese <sr@denx.de>
22676 Date: Thu Aug 16 09:54:51 2007 +0200
22678 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
22680 Signed-off-by: Stefan Roese <sr@denx.de>
22682 commit 02ba7022f62bb75908296c58c63866e1d294b69a
22683 Author: Stefan Roese <sr@denx.de>
22684 Date: Thu Aug 16 09:52:29 2007 +0200
22686 ppc4xx: Update Sequoia/Rainier bootstrap command
22688 As suggested by David Mitchell, here an update for the Sequoia/Rainier
22691 Signed-off-by: Stefan Roese <sr@denx.de>
22693 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
22694 Author: Kim Phillips <kim.phillips@freescale.com>
22695 Date: Wed Aug 15 22:30:39 2007 -0500
22697 mpc83xx: enable libfdt by default on freescale boards
22699 this enables libfdt code by default for the
22700 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
22701 mpc8349itx and gp boards.
22703 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22705 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
22706 Author: Kim Phillips <kim.phillips@freescale.com>
22707 Date: Wed Aug 15 22:30:33 2007 -0500
22709 mpc83xx: migrate remaining freescale boards to libfdt
22711 this adds libfdt support code for the freescale
22712 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
22715 Boards remain compatible with OF_FLAT_TREE.
22717 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22719 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
22720 Author: Kim Phillips <kim.phillips@freescale.com>
22721 Date: Wed Aug 15 22:30:26 2007 -0500
22723 mpc83xx: move common /memory node update mechanism to cpu.c
22725 also adds common prototypes to include/common.h.
22727 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22729 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
22730 Author: Kim Phillips <kim.phillips@freescale.com>
22731 Date: Wed Aug 15 22:30:19 2007 -0500
22733 mpc83xx: remaining 8360 libfdt fixes
22735 PCI clocks and QE frequencies weren't being updated, and the core clock
22736 was being updated incorrectly. This patch also adds a /memory node if
22737 it doesn't already exist prior to update.
22739 plus some cosmetic trimming to single line comments.
22741 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22743 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
22744 Author: Kim Phillips <kim.phillips@freescale.com>
22745 Date: Wed Aug 15 22:30:12 2007 -0500
22747 mpc83xx: fix UEC2->1 typo in libfdt setup code
22749 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22751 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
22752 Author: Kim Phillips <kim.phillips@freescale.com>
22753 Date: Wed Aug 15 22:30:05 2007 -0500
22755 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
22757 and reorder the existing 83xx maintainers alpha.
22759 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22761 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
22762 Author: Michal Simek <monstr@monstr.eu>
22763 Date: Wed Aug 15 21:15:05 2007 +0200
22765 [FIX] Resolve problem with warnings
22766 microblaze toolchain don't support PRAGMA PACK.
22768 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
22769 Author: Michal Simek <monstr@monstr.eu>
22770 Date: Wed Aug 15 21:05:07 2007 +0200
22772 [FIX] Correction command setting for Microblaze boards
22774 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
22775 Author: Michal Simek <monstr@monstr.eu>
22776 Date: Wed Aug 15 21:03:41 2007 +0200
22778 [FIX] Correction command definition
22780 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
22781 Author: Jon Loeliger <jdl@freescale.com>
22782 Date: Wed Aug 15 11:55:35 2007 -0500
22784 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
22786 Remove a leftover in net/tftp.c while we're at it.
22788 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22790 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
22791 Author: Jon Loeliger <jdl@freescale.com>
22792 Date: Wed Aug 15 12:20:40 2007 -0500
22794 Move the MPC8641HPCN board under board/freescale.
22796 Minor path corrections needed to ensure buildability.
22798 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22800 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
22801 Author: Jon Loeliger <jdl@freescale.com>
22802 Date: Wed Aug 15 11:46:22 2007 -0500
22804 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
22806 Remove a leftover in net/tftp.c while we're at it.
22808 Signed-off-by: Jon Loeliger <jdl@freescale.com>
22810 commit 210f463c71917b7a4495c2103c228b9c179ae64d
22811 Author: Jerry Van Baren <gvb.uboot@gmail.com>
22812 Date: Wed Aug 15 11:13:15 2007 -0400
22814 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
22816 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
22817 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
22818 when it should have gone inside of the conditional. As a result, it
22819 broke non-LIBFDT board builds.
22821 Also added a missing "not." to the comment.
22823 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
22825 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
22826 Author: Niklaus Giger <niklaus.giger@netstal.com>
22827 Date: Wed Aug 15 12:14:23 2007 +0200
22829 PPC4xx:HCU4/5-Board fix compile warning
22831 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
22833 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
22834 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
22835 Date: Tue Aug 14 14:06:45 2007 -0500
22837 Fix malloc size error in ahci_init_one.
22839 Typically this causes scsi init to corrupt the
22840 devlist and break the coninfo command.
22841 Fix a compiler size warning.
22843 Signed-off-by: Jason Jin <jason.jin@freescale.com>
22844 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
22845 Acked-by: Andy Fleming <afleming@freescale.com>
22847 commit b361acd64fd2525c081b9b288b0804efe209c0e9
22848 Author: ksi@koi8.net <ksi@koi8.net>
22849 Date: Tue Aug 14 10:02:16 2007 -0700
22851 TI DaVinci - fix unsupported %hhx format
22853 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
22855 commit f01dbb5424a81453c81190dd30e945891466f621
22856 Author: Wolfgang Denk <wd@denx.de>
22857 Date: Tue Aug 14 18:42:36 2007 +0200
22859 Coding style cleanup. Update CHANGELOG.
22861 Signed-off-by: Wolfgang Denk <wd@denx.de>
22863 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
22864 Author: Andy Fleming <afleming@freescale.com>
22865 Date: Tue Aug 14 10:32:59 2007 -0500
22867 Fix initrd/dtb interaction
22869 The original code would wrongly relocate the blob to be right before
22870 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
22871 if it is defined. So we make two changes:
22873 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
22875 2) If the blob is being relocated, relocate it before kbd, not initrd
22877 Signed-off-by: Andy Fleming <afleming@freescale.com>
22879 commit e54b970173769307a116bd34028b6d0c2eea2a4e
22880 Author: Peter Pearse <peter.pearse@arm.com>
22881 Date: Tue Aug 14 15:40:00 2007 +0100
22883 Supply spi interface in at45.c
22885 commit 4ce846ec59f36b85d6644a769690ad3feb667575
22886 Author: Stefan Roese <sr@denx.de>
22887 Date: Tue Aug 14 15:12:01 2007 +0200
22889 POST: Fix merge problem
22891 Signed-off-by: Stefan Roese <sr@denx.de>
22893 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
22894 Author: Stefan Roese <sr@denx.de>
22895 Date: Tue Aug 14 15:03:17 2007 +0200
22897 Coding style cleanup
22899 Signed-off-by: Stefan Roese <sr@denx.de>
22901 commit 779e975117a75e91fcebe226a63104dbfb924ab1
22902 Author: Stefan Roese <sr@denx.de>
22903 Date: Tue Aug 14 14:44:41 2007 +0200
22905 ppc4xx: Add initial Zeus (PPC405EP) board support
22907 Signed-off-by: Stefan Roese <sr@denx.de>
22909 commit c5a172a5fd636c12467429e3f7910e53773979c6
22910 Author: Stefan Roese <sr@denx.de>
22911 Date: Tue Aug 14 14:41:55 2007 +0200
22913 POST: Add option for external ethernet loopback test
22915 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
22916 is not done using an internal loopback connection, but by assuming
22917 that an external loopback connector is plugged into the board.
22919 Signed-off-by: Stefan Roese <sr@denx.de>
22921 commit eb2b4010ae426245172988804ee8d9193fb41038
22922 Author: Stefan Roese <sr@denx.de>
22923 Date: Tue Aug 14 14:39:44 2007 +0200
22925 POST: Add ppc405 support to cache and UART POST
22927 Signed-off-by: Stefan Roese <sr@denx.de>
22929 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
22930 Author: Peter Pearse <peter.pearse@arm.com>
22931 Date: Tue Aug 14 10:46:32 2007 +0100
22933 Replace lost end of at45.c.
22935 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
22936 Author: Peter Pearse <peter.pearse@arm.com>
22937 Date: Tue Aug 14 10:30:06 2007 +0100
22939 Update Makefiles for merged and split at45.c.
22941 commit 3454cece2db57cb9eb7087995f7e73066a163f71
22942 Author: Peter Pearse <peter.pearse@arm.com>
22943 Date: Tue Aug 14 10:21:06 2007 +0100
22945 Delete the merged files.
22947 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
22948 Author: Peter Pearse <peter.pearse@arm.com>
22949 Date: Tue Aug 14 10:14:05 2007 +0100
22953 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
22954 Author: Peter Pearse <peter.pearse@arm.com>
22955 Date: Tue Aug 14 10:10:52 2007 +0100
22957 Add MACH_TYPE records for several AT91 boards.
22958 Merge to two at45.c files into a common file, split to at45.c and spi.c
22959 Fix spelling error in DM9161 PHY Support.
22960 Initialize at91rm9200 board (and set LED).
22961 Add PIO control for at91rm9200dk LEDs and Mux.
22962 Change dataflash partition boundaries to be compatible with Linux 2.6.
22964 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
22965 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
22967 commit 4ef35e53c693556c54b0c22d6f873de87bade253
22968 Author: Wolfgang Denk <wd@denx.de>
22969 Date: Tue Aug 14 09:54:46 2007 +0200
22971 Coding style cleanup, update CHANGELOG
22973 Signed-off-by: Wolfgang Denk <wd@denx.de>
22975 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
22976 Author: Wolfgang Denk <wd@denx.de>
22977 Date: Tue Aug 14 09:47:27 2007 +0200
22979 Coding style cleanup; rebuild CHANGELOG
22981 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
22982 Author: Randy Vinson <rvinson@linuxbox.(none)>
22983 Date: Tue Feb 27 19:42:22 2007 -0700
22985 85xxCDS: Add make targets for legacy systems.
22987 The PCI ID select values on the Arcadia main board differ depending
22988 on the version of the hardware. The standard configuration supports
22989 Rev 3.1. The legacy target supports Rev 2.x.
22991 Signed-off-by Randy Vinson <rvinson@mvista.com>
22993 commit e41094c7e38177c755fbd9b182018069614f080d
22994 Author: Andy Fleming <afleming@freescale.com>
22995 Date: Tue Aug 14 01:50:09 2007 -0500
22997 85xxCDS: Enable the VIA PCI-to-ISA bridge.
22999 Author: Randy Vinson <rvinson@linuxbox.(none)>
23001 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
23002 Arcadia main board.
23004 Signed-off-by: Randy Vinson <rvinson@mvista.com>
23005 Signed-off-by: York Sun <yorksun@freescale.com>
23007 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
23008 Author: Andy Fleming <afleming@freescale.com>
23009 Date: Tue Aug 14 00:14:25 2007 -0500
23011 Add support for UEC to 8568
23013 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
23014 Signed-off-by: Andy Fleming <afleming@freescale.com>
23016 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
23017 Author: Haiying Wang <Haiying.Wang@freescale.com>
23018 Date: Tue Jun 19 14:18:34 2007 -0400
23020 Add PCI support for MPC8568MDS board
23022 This patch is against u-boot-mpc85xx.git of www.denx.com
23024 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
23025 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
23027 commit d111d6382c99fdea08c2312eeeae8786945e189a
23028 Author: Haiying Wang <Haiying.Wang@freescale.com>
23029 Date: Tue Jun 19 14:18:32 2007 -0400
23031 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
23033 This patch is against u-boot-mpc85xx.git of www.denx.com
23035 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
23036 both MPC8548CDS board and MPC8568MDS board, especially for supporting
23039 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
23040 DDR2 on all current board versions especially ver 1.92 or later to bring
23043 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
23045 commit 3db0bef59eab1155801618cef5c481e97553b597
23046 Author: Kumar Gala <galak@kernel.crashing.org>
23047 Date: Tue Aug 7 18:07:27 2007 -0500
23049 Use an absolute address when jumping out of 4k boot page
23051 On e500 when we leave the 4k boot page we should use an absolute address since
23052 we don't know where the board code may want us to be really running at.
23054 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23056 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
23057 Author: Andy Fleming <afleming@freescale.com>
23058 Date: Mon Aug 13 14:49:59 2007 -0500
23060 MPC85xx BA bits not set for 3-bit bank address DIMM
23062 The current implementation does not set the number of bank address bits
23063 (BA) in the processor. The default assumes 2 logical bank bits. This
23064 works fine for a DIMM that uses devices with 4 internal banks (SPD
23065 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
23066 devices with 8 internal banks (SPD byte17 = 0x8).
23068 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
23070 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
23071 Author: Andy Fleming <afleming@freescale.com>
23072 Date: Mon Aug 13 14:38:06 2007 -0500
23074 Fix minor 85xx warnings
23076 Some patches had inserted warnings into the build:
23077 * mpc8560ads declared data without using it
23078 * cpu_init declared ecm and immap without using it in all CONFIGs
23079 * MPC8548CDS.h had its default filenames changed so that they contained
23080 "\m" in the paths. Made the defaults not Windows-specific (or
23083 Signed-off-by: Andy Fleming <afleming@freescale.com>
23085 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
23086 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
23087 Date: Fri Jul 27 01:50:52 2007 -0500
23089 8548cds PCIE support.
23091 Make the early L1 cache stack region guarded to prevent speculative
23092 fetches outside the locked range.
23094 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
23095 init.S whitespace cleanup.
23097 Allow TEXT_BASE value to be specified on command line. This allows it
23098 to be set to 0xfffc0000 which cuts the uboot binary in half.
23100 Clear and enable lbc and ecm errors.
23102 Update last_busno in device-tree for pci and pcie.
23104 Remove load of obsolete cpu/mpc85xx/pci.0
23106 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23107 Acked-by: Andy Fleming <afleming@freescale.com>
23109 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
23110 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
23111 Date: Fri Jul 27 01:50:51 2007 -0500
23113 8544ds PCIE support
23115 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
23117 Enable LBC and ECM errors and clear error registers.
23119 Add tftpflash env var to get uboot from tftp server and flash it.
23121 Add pci/pcie convenience env vars to display register space:
23122 "run pcie3regs" to see all pcie3 ccsr registers
23123 "run pcie3cfg" to see all cfg registers
23124 Whitespace cleanup and MPC8544DS.h
23126 Enable CONFIG_INTERRUPTS.
23128 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23129 Acked-by: Andy Fleming <afleming@freescale.com>
23131 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
23132 Author: Andy Fleming <afleming@freescale.com>
23133 Date: Tue Aug 14 01:34:21 2007 -0500
23135 85xx start.S cleanup and exception support
23137 From: Ed Swarthout <Ed.Swarthout@freescale.com>
23139 Support external interrupts from platform to eliminate system hangs.
23140 Define CONFIG_INTERRUPTS board configure option to enable.
23141 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
23143 Remove extra cpu initialization redundant with hardware initialization.
23144 Whitespace cleanup.
23146 Define and use _START_OFFSET consistent with other processors using
23149 Move additional code from .text to boot page to make room for
23150 exception vectors at start of image.
23152 Handle Machine Check, External and Critical exceptions.
23154 Fix e500 machine check error determination in traps.c
23156 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
23158 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23159 Acked-by: Andy Fleming <afleming@freescale.com>
23161 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
23162 Author: Andy Fleming <afleming@freescale.com>
23163 Date: Tue Aug 14 01:33:18 2007 -0500
23165 Add MPC8544DS README
23167 Signed-off-by: Andy Fleming <afleming@freescale.com>
23169 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
23170 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
23171 Date: Fri Jul 27 01:50:48 2007 -0500
23173 85xx allow debugger to configure ddr.
23175 Only check for mpc8548 rev 1 when compiled for 8548.
23177 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23178 Acked-by: Andy Fleming <afleming@freescale.com>
23180 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
23181 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
23182 Date: Fri Jul 27 01:50:47 2007 -0500
23184 mpc85xx L2 cache reporting and SRAM relocation option.
23186 Allow debugger to override flash cs0/cs1 settings to enable alternate
23189 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23190 Acked-by: Andy Fleming <afleming@freescale.com>
23192 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
23193 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
23194 Date: Fri Jul 27 01:50:46 2007 -0500
23196 e500 needs ppc_asm.tmp MCK_EXCEPTION
23198 Always define MCK_EXCEPTION macro - so e500 can use it too.
23200 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23201 Acked-by: Andy Fleming <afleming@freescale.com>
23203 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
23204 Author: David Updegraff <dave@cray.com>
23205 Date: Mon Jun 11 10:41:07 2007 -0500
23207 multicast tftp: RFC2090
23209 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
23210 on Realtek RTL8139 and Freescale TSEC.
23212 Signed-off-by: David Updegraff <dave@cray.com>
23213 Signed-off-by: Ben Warren <bwarren@qstreams.com>
23215 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
23216 Author: Wilson Callan <wcallan@savantav.com>
23217 Date: Sat Jul 28 10:56:13 2007 -0400
23219 New CONFIG_BOOTP_SERVERIP option
23221 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
23222 from the bootp server
23224 Signed-off-by: Wilson Callan <wcallan@savantav.com>
23225 Signed-off-by: Ben Warren <bwarren@qstreams.com>
23227 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
23228 Author: Mike Rapoport <mike@compulab.co.il>
23229 Date: Sun Aug 12 08:48:27 2007 +0300
23231 Add ability to take MAC address from the environment to DM9000 driver
23233 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
23234 Signed-off-by: Ben Warren <bwarren@qstreams.com>
23236 commit be5d72d10d47609326226225181e301fb9a33b58
23237 Author: Wolfgang Denk <wd@denx.de>
23238 Date: Mon Aug 13 21:57:53 2007 +0200
23240 Minor coding style cleanup. Update CHANGELOG.
23242 Signed-off-by: Wolfgang Denk <wd@denx.de>
23244 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
23245 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
23246 Date: Sat Aug 11 06:54:58 2007 -0500
23248 Modify SBC8641D to use new Freescale PCI routines
23250 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
23253 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
23254 Signde-off-by: Jon Loeliger <jdl@freescale.com>
23256 commit a08458303e7f9db67f296980036d3292c35cb45c
23257 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
23258 Date: Fri Jun 29 18:38:51 2007 +0200
23260 atmel_mci: Fix data timeout value
23262 Calculate the data timeout based on values from the CSD instead of
23263 just using a hardcoded DTOR value. This is a backport of a similar fix
23264 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
23267 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
23269 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
23270 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
23271 Date: Mon Aug 13 17:22:31 2007 +0200
23273 AVR32: Include <div64.h> instead of <asm/div64.h>
23275 include/asm-avr32/div64.h was recently moved to include/div64.h, but
23276 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
23277 the patch was merged perhaps?)
23279 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
23282 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
23284 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
23285 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
23286 Date: Wed Jun 27 13:34:26 2007 +0200
23288 atmel_mci: Use 512 byte blocksize if possible
23290 Instead of always using the largest blocksize the card supports, check
23291 if it can support smaller block sizes and use 512 bytes if possible.
23292 Most cards do support this, and other parts of u-boot seem to have
23293 trouble with block sizes different from 512 bytes.
23295 Also enable underrun/overrun protection.
23297 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
23298 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
23300 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
23301 Author: Stefan Roese <sr@denx.de>
23302 Date: Mon Aug 13 09:05:33 2007 +0200
23304 ppc4xx: Fix problem in PLL clock calculation
23306 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
23307 and fixes a bug in the PLL clock calculation.
23309 Signed-off-by: Stefan Roese <sr@denx.de>
23311 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
23312 Author: Wolfgang Denk <wd@denx.de>
23313 Date: Sun Aug 12 21:34:50 2007 +0200
23317 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
23318 Author: Wolfgang Denk <wd@denx.de>
23319 Date: Sun Aug 12 21:34:34 2007 +0200
23321 Minor alignment of output, 2nd try.
23322 Also update CHANGELOG
23324 Signed-off-by: Wolfgang Denk <wd@denx.de>
23326 commit 6b309f22a724fad8418e811751a0741b893419cf
23327 Author: Wolfgang Denk <wd@denx.de>
23328 Date: Sun Aug 12 20:35:49 2007 +0200
23330 Minor alignment of output
23332 Signed-off-by: Wolfgang Denk <wd@denx.de>
23334 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
23335 Author: Wolfgang Denk <wd@denx.de>
23336 Date: Sun Aug 12 18:28:18 2007 +0200
23338 Cleanup output on ADS5121 board
23340 Signed-off-by: Wolfgang Denk
23342 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
23343 Author: Wolfgang Denk <wd@denx.de>
23344 Date: Sun Aug 12 15:11:38 2007 +0200
23346 Adapt board configuration and fix kernel crash on MCC200 board.
23348 The update procedure was modified to turn off the USB subsystem
23349 before exit for MCC200 and TRAB. This is necessary as otherwise the
23350 USB controller continues to write periodically to system memory!
23352 MCC200-specific notes:
23353 - the patch disables the magic key check for MCC200
23354 - the patch contains the configuration changes made
23355 for the new revision of the board.
23357 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
23358 Signed-off-by: Wolfgang Denk <wd@denx.de>
23360 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
23361 Author: Wolfgang Denk <wd@denx.de>
23362 Date: Sun Aug 12 14:47:54 2007 +0200
23364 Adjust default configuration of ADS5121 board.
23366 Signed-off-by: Wolfgang Denk <wd@denx.de>
23368 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
23369 Author: Wolfgang Denk <wd@denx.de>
23370 Date: Sun Aug 12 14:27:39 2007 +0200
23372 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
23374 Signed-off-by: Wolfgang Denk <wd@denx.de>
23376 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
23377 Author: Gerald Van Baren <vanbaren@cideas.com>
23378 Date: Tue Aug 7 21:14:22 2007 -0400
23380 Improve error print messages.
23382 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23384 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
23385 Author: Kim Phillips <kim.phillips@freescale.com>
23386 Date: Tue Jul 17 13:57:04 2007 -0500
23388 fdt: allow for builds that don't want env and bd_t nodes
23390 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
23393 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23395 commit 91148bf7aeba142d6f348805db7625db7da64d6f
23396 Author: Kim Phillips <kim.phillips@freescale.com>
23397 Date: Tue Jul 17 13:56:53 2007 -0500
23399 fdt: do board setup based on fdt address specified on bootm line
23401 The last fdt patch to bootm did board setup based on the address
23402 specified by a prior fdt address command invocation. The bootm
23403 code, as its call to fdt_chosen does, should use the fdt specified
23404 by the user on the bootm command. Note this restores full
23405 functionality for the 8360's existing default boot environment
23406 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
23407 before booting a kernel).
23409 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23411 commit e125a2ffc209dd34794e326c7175658253beadf3
23412 Author: Gerald Van Baren <vanbaren@cideas.com>
23413 Date: Tue Jul 10 20:40:39 2007 -0400
23415 Call ft_board_setup() from the bootm command.
23417 In the patch titled "Create new fdt boardsetup command..." I removed the
23418 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
23419 to add a direct call back into cmd_bootm.c
23421 This fixes the oversight by adding the direct call to the bootm command.
23423 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23425 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
23426 Author: Gerald Van Baren <vanbaren@cideas.com>
23427 Date: Mon Jun 25 23:25:28 2007 -0400
23429 Create new fdt boardsetup command, fix bug parsing [] form of set values.
23431 Previously ft_board_setup() was called by fdt_chosen() which was not
23432 really correctly structured. This splits ft_board_setup() out by creating
23433 a new fdt boardsetup command.
23435 Fix a bug when parsing fdt set command values which have the square
23436 bracket form [00 11 22 33] - the length was updated incorrectly in when
23439 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23441 commit 6f35ded9e85493595e0eb66a82b502a95326d049
23442 Author: Gerald Van Baren <vanbaren@cideas.com>
23443 Date: Mon Jun 25 20:55:58 2007 -0400
23445 Tighten up the error messages.
23447 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23449 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
23450 Author: Gerald Van Baren <vanbaren@cideas.com>
23451 Date: Mon Jun 25 19:52:23 2007 -0400
23453 Asthetic improvements: error messages and line lengths.
23455 Tighten up the error messages, split overlength lines.
23457 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23459 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
23460 Author: Gerald Van Baren <vanbaren@cideas.com>
23461 Date: Fri May 25 22:08:57 2007 -0400
23463 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
23465 The fdt_chosen() function was adding/seting some properties ad-hoc
23466 improperly and duplicated (poorly) what was done in ft_board_setup()
23468 Clean up long lines (setting properties, printing errors).
23470 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23472 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
23473 Author: Gerald Van Baren <vanbaren@cideas.com>
23474 Date: Mon May 21 23:27:16 2007 -0400
23476 For fdt_find_node_by_path(), handle the root path properly.
23478 Also removes the special case root path detection in cmd_fdt.c since it
23479 is no longer necessary.
23481 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23483 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
23484 Author: Gerald Van Baren <vanbaren@cideas.com>
23485 Date: Thu May 17 23:54:36 2007 -0400
23487 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
23489 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
23490 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
23492 commit 1a861169bc3758f9de3aead62b058736c6891246
23493 Author: Gerald Van Baren <vanbaren@cideas.com>
23494 Date: Wed Jun 6 22:47:58 2007 -0400
23496 Replace fdt_node_offset() with fdt_find_node_by_path().
23498 The new name matches more closely the kernel's name, which is also
23499 a much better description.
23501 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
23502 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
23504 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
23505 Author: Gerald Van Baren <vanbaren@cideas.com>
23506 Date: Wed May 16 22:39:59 2007 -0400
23508 Fix cmd_fdt line lengths, refactor code.
23510 Break lines that were greater than 80 characters in length.
23511 Move the fdt print and property parsing code to separate static functions
23512 to reduce coding clutter in the fdt_cmd handling body.
23514 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23516 commit 25114033ab21788810c48ba4df103b649da1223b
23517 Author: Gerald Van Baren <vanbaren@cideas.com>
23518 Date: Sat May 12 09:47:25 2007 -0400
23520 FDT command improvements.
23522 Fix "fdt set" so that it will create a non-existing property.
23523 Add "fdt mknode" to create nodes.
23525 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23527 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
23528 Author: Gerald Van Baren <vanbaren@cideas.com>
23529 Date: Sat May 12 09:45:46 2007 -0400
23531 Reorganize and fix problems (returns) in the bootm command.
23533 Do *NOT* return after the "point of no return" has been passed.
23534 If something goes wrong, the board must be reset after that point.
23535 Move the "Transferring control to Linux" debug message back to where it
23536 belongs: just before transferring control to linux.
23538 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23540 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
23541 Author: Gerald Van Baren <vanbaren@cideas.com>
23542 Date: Tue May 8 21:27:35 2007 -0400
23544 Fix bugs in the CONFIG_OF_LIBFDT
23546 Stupid coding mistakes (identified by Timur Tabi, thanks).
23548 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23550 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
23551 Author: Gerald Van Baren <vanbaren@cideas.com>
23552 Date: Wed Apr 25 22:47:15 2007 -0400
23554 Improve fdt move length handling.
23556 Make the length parameter optional: if not specified, do the move using
23557 the current size unchanged.
23559 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23561 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
23562 Author: Gerald Van Baren <vanbaren@cideas.com>
23563 Date: Wed Apr 25 22:23:36 2007 -0400
23565 Minor code clean up.
23567 Declare the variable fdt properly as extern.
23568 Call the "set_fn" function pointer the "short way" without the full
23569 dereferencing syntax.
23571 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23573 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
23574 Author: Gerald Van Baren <vanbaren@cideas.com>
23575 Date: Wed Apr 25 21:24:27 2007 -0400
23577 Improve error messages, more informative.
23579 Print more than the raw libfdt error message strings. This is especially
23580 useful for cluing in the user when the bootm command aborts due to
23583 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23585 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
23586 Author: Gerald Van Baren <vanbaren@cideas.com>
23587 Date: Fri Apr 20 22:46:53 2007 -0400
23589 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
23591 This is the way u-boot reduces configured-out code. At Wolfgang
23592 Grandegger and Wolfgang Denk's request, make libfdt conform.
23594 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23596 commit 923efd286411ed052d9e074f59f8986d6081061c
23597 Author: Bruce Adler <bruce.adler@ccpu.com>
23598 Date: Fri Aug 10 14:54:47 2007 -0700
23600 add image size and descriptors for Spartan 3E FPGA chips
23602 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
23604 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
23606 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
23607 Author: Kim Phillips <kim.phillips@freescale.com>
23608 Date: Fri Aug 10 15:34:48 2007 -0500
23610 make MAKEALL more immune to merge conflicts
23612 ..by placing board entries one per line, as suggested by jdl.
23614 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23616 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
23617 Author: Kim Phillips <kim.phillips@freescale.com>
23618 Date: Fri Aug 10 13:28:25 2007 -0500
23620 README: Remove outdated cpu type, board type, and NAME_config lists
23622 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23624 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
23625 Author: Dave Liu <r63238@freescale.com>
23626 Date: Fri Aug 10 15:48:59 2007 +0800
23628 mpc83xx: Suppress the warning 'burstlen'
23630 suppress the warning 'burstlen' of spd_sdram.
23632 Signed-off-by: Dave Liu <daveliu@freescale.com>
23634 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
23635 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
23636 Date: Thu Aug 9 15:11:03 2007 -0500
23638 Add support for SBC8641D. Config files.
23640 Add support for Wind River's SBC8641D reference board.
23642 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
23643 Acked-by: Wolfgang Denk <wd@denx.de>
23644 Acked-by: Jon Loeliger <jdl@freescale.com>
23646 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
23647 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
23648 Date: Thu Aug 9 15:10:53 2007 -0500
23650 Add support for SBC8641D. Board files.
23652 Add support for Wind River's SBC8641D reference board.
23654 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
23655 Acked-by: Wolfgang Denk <wd@denx.de>
23656 Acked-by: Jon Loeliger <jdl@freescale.com>
23658 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
23659 Author: Stefan Roese <sr@denx.de>
23660 Date: Fri Aug 10 20:34:58 2007 +0200
23662 Conding style cleanup
23664 Signed-off-by: Stefan Roese <sr@denx.de>
23666 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
23667 Author: Sergey Kubushyn <ksi@koi8.net>
23668 Date: Fri Aug 10 20:26:18 2007 +0200
23670 [ARM] TI DaVinci support, hopefully final
23672 Add support for the following DaVinci boards:
23679 - Split into separate board directories
23680 - Removed changes to MTD_DEBUG (or whatever it's called)
23681 - New CONFIG_CMD party line followed
23682 - Some cosmetic fixes, cleanup etc.
23683 - Patches against the latest U-Boot tree as of now.
23684 - Fixed CONFIG_CMD_NET in net files.
23685 - Fixed CONFIG_CMD_EEPROM for schmoogie.
23686 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
23687 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
23688 but it at least compiles.
23690 Here is an excerpt from session log on SCHMOOGIE...
23692 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
23701 ETH PHY : DP83848 @ 0x01
23703 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
23704 U-Boot > ping 192.168.253.10
23705 host 192.168.253.10 is alive
23708 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
23709 Acked-by: Dirk Behme <dirk.behme@gmail.com>
23710 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
23711 Acked-by: Stefan Roese <sr@denx.de>
23713 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
23714 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
23715 Date: Fri Jul 27 01:50:45 2007 -0500
23717 fsl_pci_init cleanup.
23719 Do not enable normal errors created during probe (master abort, perr,
23720 and pcie Invalid Configuration access).
23722 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
23724 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23725 Acked-by: Andy Fleming <afleming@freescale.com>
23727 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
23728 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
23729 Date: Fri Jul 27 01:50:44 2007 -0500
23731 pciauto_setup_device bars_num fix
23733 Passing bars_num=0 to pciauto_setup_device should assign no bars.
23735 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23736 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23737 Acked-by: Andy Fleming <afleming@freescale.com>
23739 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
23740 Author: Jon Loeliger <jdl@freescale.com>
23741 Date: Mon Aug 6 17:39:44 2007 -0500
23743 8641hpcn: Do correct sized pointer math.
23745 When I rebased Ed's patch and cleaned up a few compilation
23746 problems, I apparently rebased my brain on crack first.
23747 Fix that by doing (char *) sized pointer math as needed.
23749 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23751 commit cfc7a7f5bb3273c9951173c788001d45118f141f
23752 Author: Jon Loeliger <jdl@freescale.com>
23753 Date: Thu Aug 2 14:42:20 2007 -0500
23757 Remove rev 1 fixes.
23758 Always set PICGCR_MODE.
23759 Enable machine check and provide board config option
23760 to set and handle SoC error interrupts.
23762 Include MSSSR0 in error message.
23764 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
23766 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
23767 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23769 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
23770 Author: Stefan Roese <sr@denx.de>
23771 Date: Fri Aug 10 10:42:25 2007 +0200
23773 Coding style cleanup
23775 Signed-off-by: Stefan Roese <sr@denx.de>
23777 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
23778 Author: Dirk Behme <dirk.behme@googlemail.com>
23779 Date: Thu Aug 2 17:42:08 2007 +0200
23781 Make use of generic 64bit division in nand_util.c
23783 Use generic 64bit division in nand_util.c. This makes nand_util.c
23784 independent of any toolchain 64bit division.
23786 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
23788 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
23789 Author: Dirk Behme <dirk.behme@googlemail.com>
23790 Date: Thu Aug 2 17:41:14 2007 +0200
23792 Move 64bit division from avr32 to generic lib
23794 Move the 64bit division from lib_avr32 to lib_generic. With this, all
23795 boards can do_div/__div64_32 if needed, not only avr one. Code is put
23796 to lib_generic, so no larger memory footprint if not used. No code
23797 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
23799 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
23801 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
23802 Author: Niklaus Giger <niklausgiger@gmx.ch>
23803 Date: Fri Jul 27 11:31:22 2007 +0200
23805 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
23807 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23809 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
23810 Author: Niklaus Giger <niklausgiger@gmx.ch>
23811 Date: Fri Jul 27 11:30:33 2007 +0200
23813 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
23815 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23817 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
23818 Author: Niklaus Giger <niklausgiger@gmx.ch>
23819 Date: Fri Jul 27 11:38:26 2007 +0200
23821 Add PPC4xx-HCU4 and HCU5 boards: common files
23823 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23825 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
23826 Author: Niklaus Giger <niklausgiger@gmx.ch>
23827 Date: Fri Jul 27 11:28:44 2007 +0200
23829 Add PPC4xx-HCU4 and HCU5 boards: make related
23831 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23833 commit 137fdd9f474ecb853efdace5200576308c67f18d
23834 Author: Niklaus Giger <niklausgiger@gmx.ch>
23835 Date: Fri Jul 27 11:28:03 2007 +0200
23837 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
23839 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23841 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
23842 Author: Niklaus Giger <niklausgiger@gmx.ch>
23843 Date: Fri Jul 27 11:27:15 2007 +0200
23845 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
23847 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23849 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
23850 Author: Niklaus Giger <niklausgiger@gmx.ch>
23851 Date: Fri Jul 27 11:25:31 2007 +0200
23853 Add PPC4xx-HCU4 and HCU5 boards: READMEs
23855 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23857 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
23858 Author: Niklaus Giger <niklausgiger@gmx.ch>
23859 Date: Fri Jul 27 11:37:40 2007 +0200
23861 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
23863 This series of patches adds support for 2 boards from Netstal Maschinen.
23865 The HCU4 has a PPC405Gpr and
23866 the HCU5 has a PPC440EPX.
23868 The HCU4 has a somehow complicated flash setup, as the booteprom is
23869 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
23872 The HCU5 has only a booteprom as the whole code will be downloaded from a
23873 different board which has HD, CD-ROM, etc and where all code is stored.
23875 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
23878 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23880 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
23881 Author: Stefan Roese <sr@denx.de>
23882 Date: Fri Aug 10 08:42:55 2007 +0200
23884 ppc4xx: Update lwmon5 POST configuration
23886 Signed-off-by: Stefan Roese <sr@denx.de>
23888 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
23889 Author: Yuri Tikhonov <yur@emcraft.com>
23890 Date: Fri Aug 10 08:25:22 2007 +0200
23892 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
23894 The patch adds support for UART POST on ppc44x-based boards with no
23895 external serial clocks installed.
23897 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
23898 Acked-by: Stefan Roese <sr@denx.de>
23900 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
23901 Author: Kim Phillips <kim.phillips@freescale.com>
23902 Date: Mon Aug 6 18:18:34 2007 -0500
23904 mpc83xx: fix ITX[GP] O=builddir builds
23906 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
23908 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
23909 "BUILD_DIR=<some dir> ./MAKEALL ..."
23911 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23913 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
23914 Author: Dave Liu <r63238@freescale.com>
23915 Date: Wed Aug 1 15:00:59 2007 +0800
23917 mpc83xx: Correct the README for DDR ECC
23919 Update the README for DDR ECC, change the name
23920 to README.mpc83xx.ddrecc.
23922 Signed-off-by: Dave Liu <daveliu@freescale.com>
23923 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23925 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
23926 Author: Dave Liu <r63238@freescale.com>
23927 Date: Wed Aug 1 15:00:15 2007 +0800
23929 mpc83xx: Consolidate the ECC support of 83xx
23931 Remove the duplicated source code of ecc command on the <board>.c,
23932 for reused, move these code to cpu/mpc83xx directory.
23934 Signed-off-by: Dave Liu <daveliu@freescale.com>
23935 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23937 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
23938 Author: Dave Liu <r63238@freescale.com>
23939 Date: Sat Aug 4 13:37:39 2007 +0800
23941 mpc83xx: Correct the burst length for DDR2 with 32 bits
23943 The burst length should be 4 for DDR2 with 32 bits bus
23945 Signed-off-by: Dave Liu <daveliu@freescale.com>
23947 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
23948 Author: Kim Phillips <kim.phillips@freescale.com>
23949 Date: Wed Jul 25 19:25:33 2007 -0500
23951 mpc83xx: add support for the MPC8323E RDB
23953 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
23954 five 10/100 ethernet ports connected via an ICPlus IP175C
23955 switch, one PCI slot, and serial. Features not supported
23956 in this patch are SD card interface, 2 USB ports, and the
23959 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
23960 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23962 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
23963 Author: Kim Phillips <kim.phillips@freescale.com>
23964 Date: Wed Jul 25 19:25:28 2007 -0500
23966 mpc83xx: fixup generic pci for libfdt
23968 add libfdt support to the generic 83xx pci code
23970 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23972 commit f57ac7a7b37109245b69db80839ebee26179966a
23973 Author: Kim Phillips <kim.phillips@freescale.com>
23974 Date: Wed Jul 25 19:25:22 2007 -0500
23976 mpc83xx: fix 8360 and cpu functions to update fdt being passed
23978 ..and not the global fdt. Rename local fdt vars to blob so as not to
23979 be confused with the global var with the same three-letter name.
23981 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23983 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
23984 Author: Jerry Van Baren <gvb.uboot@gmail.com>
23985 Date: Wed Jul 4 21:34:24 2007 -0400
23987 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
23989 Several node strings were not correct (trailing slashes and properties
23991 Added setting of the timebase-frequency.
23992 Improved error messages and use debug() instead of printf().
23994 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23995 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23997 commit 26d02c9bbac1751c5e19294f000100b48d43a920
23998 Author: Jerry Van Baren <gvb.uboot@gmail.com>
23999 Date: Wed Jul 4 21:27:30 2007 -0400
24001 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
24003 The new name matches more closely the kernel's name, which is also
24004 a much better description.
24006 These are the mpc83xx changes made necessary by the function name change.
24008 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
24009 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
24010 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24012 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
24013 Author: Dave Liu <daveliu@freescale.com>
24014 Date: Mon Jun 25 10:41:56 2007 +0800
24016 mpc83xx: Add support for the display of reset status
24018 83xx processor family has many reset sources, such as
24019 power on reset, software hard reset, software soft reset,
24020 JTAG, bus monitor, software watchdog, check stop reset,
24021 external hard reset, external software reset.
24022 sometimes, to figure out the fault of system, we need to
24023 know the cause of reset early before the prompt of
24026 Signed-off-by: Dave Liu <daveliu@freescale.com>
24027 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24029 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
24030 Author: Dave Liu <daveliu@freescale.com>
24031 Date: Mon Jun 25 10:41:04 2007 +0800
24033 mpc83xx: Fix the align bug of SDMA buffer
24035 According to the latest user manual, the SDMA temporary
24036 buffer base address must be 4KB aligned.
24038 Signed-off-by: Dave Liu <daveliu@freescale.com>
24039 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24041 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
24042 Author: Dave Liu <daveliu@freescale.com>
24043 Date: Mon Jun 25 13:21:12 2007 +0800
24045 mpc83xx: Revise the MPC8360EMDS readme doc
24047 When the rev2.x silicon mount on the MPC8360EMDS baord,
24048 and if you are using the u-boot version after the commit
24049 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
24050 to make the ethernet interface usable, we have to setup
24051 the jumpers correctly.
24053 Signed-off-by: Dave Liu <daveliu@freescale.com>
24054 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24056 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
24057 Author: Timur Tabi <timur@freescale.com>
24058 Date: Tue Jul 3 13:46:32 2007 -0500
24060 FSL I2C driver programs the two I2C busses differently
24062 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
24063 The second I2C bus has its slave address programmed incorrectly and is
24064 missing a 5-us delay.
24066 Signed-off-by: Timur Tabi <timur@freescale.com>
24067 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24069 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
24070 Author: Timur Tabi <timur@freescale.com>
24071 Date: Tue Jul 3 13:04:34 2007 -0500
24073 Update SCCR programming in cpu_init_f() to support all 83xx processors
24075 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
24076 bitfields for all 83xx processors. The code to update some bitfields was
24077 compiled only on some processors. Now, the bitfields are programmed as long
24078 as the corresponding CFG_SCCR option is defined in the board header file.
24079 This means that the board header file should not define any CFG_SCCR macros
24080 for bitfields that don't exist on that processor, otherwise the SCCR will be
24081 programmed incorrectly.
24083 Signed-off-by: Timur Tabi <timur@freescale.com>
24084 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24086 commit 9546266999f0b9b51372636614211b88d90f0f25
24087 Author: Martin Krause <martin.krause@tqs.de>
24088 Date: Fri Jun 22 13:04:22 2007 +0200
24090 TQM834x: cleanup configuraton
24092 Remove irritating #undef DEBUG
24094 Signed-off-by: Martin Krause <martin.krause@tqs.de>
24095 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24097 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
24098 Author: david.saada <David.Saada@ecitele.com>
24099 Date: Mon Jun 18 09:09:53 2007 -0700
24101 MPC83xx: Fix makefile to generate config.h file in the build directory
24103 MPC83xx: Fix the Makefile config sections to generate the include/config.h
24104 file in the build directory instead of the source directory.
24106 Signed-off-by: David Saada <david.saada@ecitele.com>
24107 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24109 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
24110 Author: Lee Nipper <Lee.Nipper@freescale.com>
24111 Date: Thu Jun 14 20:07:33 2007 -0500
24113 mpc83xx: Add support for 8360 silicon revision 2.1
24115 This change adds 8360 silicon revision 2.1 support to u-boot.
24117 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
24118 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24120 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
24121 Author: Kumar Gala <galak@kernel.crashing.org>
24122 Date: Wed Aug 8 04:14:28 2007 -0500
24124 Treat ppc64 host as ppc
24126 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24128 commit 0dc4279b08ff82472bec2e2c90858602459febe8
24129 Author: Jason Jin <Jason.jin@freescale.com>
24130 Date: Wed Aug 8 09:01:46 2007 +0800
24132 Minor fix for bios emulator makefile
24134 Add $(obj) to LIB avoiding objects be built in the source dir
24136 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
24138 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
24139 Author: Jason Jin <Jason.jin@freescale.com>
24140 Date: Wed Aug 8 08:33:11 2007 +0800
24142 Add CONFIG_BIOSEMU define to guard all the bios emulator code
24144 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
24146 This patch fix the compile issue on the board that did not enable the bios emulator
24148 commit ed8106433522f2ea8933e9808346860d061d7731
24149 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
24150 Date: Tue Jul 31 12:27:25 2007 -0500
24152 tsec: fix multiple PHY support
24154 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
24155 broke multiple PHY support in tsec.c. This fixes it.
24157 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
24158 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24160 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
24161 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
24162 Date: Thu Aug 9 09:08:18 2007 -0500
24164 tsec: Allow Ten Bit Interface address to be configurable
24166 Allow the address of the Ten Bit Interface (TBI) to be changed in the
24167 event of a conflict with another device.
24169 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
24171 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
24172 Author: Stefan Roese <sr@denx.de>
24173 Date: Wed Aug 8 09:54:26 2007 +0200
24175 Coding style cleanup
24177 Signed-off-by: Stefan Roese <sr@denx.de>
24179 commit a41de1f0d373e09c782dea558385a06247111ba5
24180 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24181 Date: Sun Aug 5 05:15:18 2007 -0500
24183 Port enabled for I2C signals and chipselects port configuration.
24185 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24187 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
24188 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24189 Date: Sun Aug 5 04:31:18 2007 -0500
24193 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24195 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
24196 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24197 Date: Sun Aug 5 04:11:20 2007 -0500
24201 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24203 commit 99c03c175d2689093176facf17c58ce2cb320001
24204 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24205 Date: Sun Aug 5 03:58:52 2007 -0500
24207 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
24209 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24211 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
24212 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24213 Date: Sun Aug 5 03:55:21 2007 -0500
24215 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
24217 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24219 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
24220 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24221 Date: Sun Aug 5 03:43:30 2007 -0500
24223 Moved sync() from board file to include/asm-m68k/io.h
24225 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24227 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
24228 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24229 Date: Sun Aug 5 03:30:44 2007 -0500
24231 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
24233 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24235 commit 9998bd37ead85e93953559720710d3b0685c81e6
24236 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24237 Date: Sun Aug 5 03:19:10 2007 -0500
24239 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
24241 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24243 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
24244 Author: Jason Jin <Jason.jin@freescale.com>
24245 Date: Tue Aug 7 16:17:06 2007 +0800
24247 Add CONFIG_BIOSEMU define to guard all the bios emulator code
24249 This patch fix the compile issue on the board that did not enable the bios emulator
24251 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
24252 Author: Wolfgang Denk <wd@denx.de>
24253 Date: Tue Aug 7 16:02:13 2007 +0200
24255 Fix missing brace error in fs/fat/fat.c
24256 [pointed out by Roderik Wildenburg]
24258 Signed-off-by: Wolfgang Denk <wd@denx.de>
24260 commit 706714d97a0d08d59eda4de2268c39f504688329
24261 Author: Michal Simek <monstr@monstr.eu>
24262 Date: Mon Aug 6 23:41:53 2007 +0200
24264 [FIX] remove cute code
24266 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
24267 Author: Michal Simek <monstr@monstr.eu>
24268 Date: Mon Aug 6 23:35:26 2007 +0200
24270 [FIX] Fix romfs code
24272 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
24273 Author: Michal Simek <monstr@monstr.eu>
24274 Date: Mon Aug 6 23:31:49 2007 +0200
24276 [FIX] Coding style cleanup - Wolfgang's suggestions
24278 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
24279 Author: Wolfgang Denk <wd@denx.de>
24280 Date: Mon Aug 6 23:21:05 2007 +0200
24282 Fixed typo in README (pointed out by Martin Jost).
24284 Signed-off-by: Wolfgang Denk <wd@denx.de>
24286 commit 537223afa61f64480df31ce440a9cb386df4a814
24287 Author: Stefan Roese <sr@denx.de>
24288 Date: Mon Aug 6 21:10:17 2007 +0200
24290 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
24292 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
24293 here an updated Bamboo README.
24295 Signed-off-by: Stefan Roese <sr@denx.de>
24297 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
24298 Author: Wolfgang Denk <wd@denx.de>
24299 Date: Mon Aug 6 02:17:36 2007 +0200
24301 Coding style cleanup. Update CHANGELOG.
24303 Signed-off-by: Wolfgang Denk <wd@denx.de>
24305 commit 221838cc7eb178370ff62aa05920a582e12ac322
24306 Author: Jason Jin <Jason.jin@freescale.com>
24307 Date: Tue Jul 10 09:03:22 2007 +0800
24309 Remove the bios emulator from MAI board.
24311 The bios emulator in the MAI board can not pass compile
24312 and have a lot of crap in it. remove it and will have a
24313 clean and small bios emulator in the drivers directory
24314 which can be uesed for every board.
24316 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
24318 commit 5618332409bb96f4448d1712899369fc80c0b489
24319 Author: Jason Jin <Jason.jin@freescale.com>
24320 Date: Fri Jul 13 12:14:59 2007 +0800
24322 Fix some compile issues for MAI board.
24324 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
24326 commit 0f460a1ee148b648ee242c3157650287d4296260
24327 Author: Jason Jin <Jason.jin@freescale.com>
24328 Date: Fri Jul 13 12:14:58 2007 +0800
24330 Configurations for ATI video card BIOS emulator
24332 This patch add definition of the BIOS emulator and the ATI framebuffer
24333 driver for MPC8641HPCN board.
24335 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
24336 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
24338 commit ece92f85053b8df613edcf05b26a416cbc3d629c
24339 Author: Jason Jin <Jason.jin@freescale.com>
24340 Date: Fri Jul 6 08:34:56 2007 +0800
24342 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
24343 ATI video card BIOS. and can be used for x86 code emulation by some
24346 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
24348 commit 5072188acabde3178fac7f5a597150e6e74fd40c
24349 Author: Jason Jin <Jason.jin@freescale.com>
24350 Date: Fri Jul 6 08:33:33 2007 +0800
24352 This is a framebuffer driver for ATI video card, can work for PCI9200,
24353 X300, X700, X800 ATI video cards.
24355 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
24356 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
24358 commit 5728be389e65fd47f34b33c2596271eb4db751ae
24359 Author: Wolfgang Denk <wd@denx.de>
24360 Date: Mon Aug 6 01:01:49 2007 +0200
24362 Coding style cleanup. Update CHANGELOG.
24364 Signed-off-by: Wolfgang Denk <wd@denx.de>
24366 commit 8092fef4c29b395958bb649647da7e3775731517
24367 Author: Martin Krause <Martin.Krause@tqs.de>
24368 Date: Tue Dec 12 14:26:01 2006 +0100
24370 Add functions to list of exported functions
24372 Additionally export the following fuctions (to make trab_config build again):
24376 Also bump the ABI version to reflect this change
24378 Signed-off-by: Martin Krause <martin.krause@tqs.de>
24380 commit 63cec5814fab5d2b1c86982327433807a5ac0249
24381 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
24382 Date: Thu Aug 2 14:09:49 2007 -0500
24384 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
24386 All of the PCI/PCI-Express driver and initialization code that
24387 was in the MPC8641HPCN port has now been moved into the common
24388 drivers/fsl_pci_init.c. In a subsequent patch, this will be
24389 utilized by the 85xx ports as well.
24391 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
24393 Also enable the second PCI-Express controller on 8641
24394 by getting its BATS and CFG_ setup right.
24396 Fixed a u16 vendor compiler warning in AHCI driver too.
24398 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
24399 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
24400 Signed-off-by: Jon Loeliger <jdl@freescale.com>
24402 commit a274ca4f6d68830e7c916f897561cff8c4101c38
24403 Author: Michal Simek <monstr@monstr.eu>
24404 Date: Sun Aug 5 22:33:05 2007 +0200
24406 [FIX] Coding style cleanup
24408 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
24409 Author: Michal Simek <monstr@monstr.eu>
24410 Date: Sun Aug 5 16:13:31 2007 +0200
24412 [FIX] Xilinx Uartlite driver
24413 Because PPC405 can use UARTLITE serial interface and
24414 Microblaze can use Uart16550 serial interface not only Uartlite.
24416 commit 98889edd50aadf862071eb5664747ad0d568a20e
24417 Author: Michal Simek <monstr@monstr.eu>
24418 Date: Sun Aug 5 15:54:53 2007 +0200
24420 [FIX] Change configuration for XUPV2P Microblaze board
24422 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
24423 Author: Michal Simek <monstr@monstr.eu>
24424 Date: Sun Aug 5 15:53:50 2007 +0200
24426 [PATCH] Added support for Xilinx Emac community driver
24428 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
24429 Author: Bartlomiej Sieka <tur@semihalf.com>
24430 Date: Fri Aug 3 12:08:16 2007 +0200
24432 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
24434 Add the ability for modules from the Schindler cm5200 family to use a
24435 single U-Boot image:
24436 - rename cm1_qp1 to cm5200
24437 - add run-time module detection
24438 - parametrize SDRAM configuration according to the module we are running on
24440 Few minor, board-specific fixes included in this patch:
24441 - better MAC address handling
24442 - updated default environment ('update' command uses +{filesize} now)
24443 - improved error messages in the auto-update code
24444 - allow booting U-Boot from RAM (CFG_RAMBOOT)
24446 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
24447 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
24448 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
24450 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
24451 Author: Andy Fleming <afleming@freescale.com>
24452 Date: Fri Aug 3 04:05:25 2007 -0500
24454 Add Marvell 1149 PHY support to the TSEC
24456 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
24457 Author: Wolfgang Denk <wd@denx.de>
24458 Date: Thu Aug 2 21:27:46 2007 +0200
24460 Coding style cleanup, update CHANGELOG
24462 Signed-off-by: Wolfgang Denk <wd@denx.de>
24464 commit 63e22764d2f8653f68888c667eb65b3996b52680
24465 Author: Wolfgang Denk <wd@denx.de>
24466 Date: Thu Aug 2 10:11:18 2007 +0200
24468 Minor cleanup of <board>_nand build rules.
24470 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
24471 Author: Stefan Roese <sr@denx.de>
24472 Date: Thu Aug 2 08:33:56 2007 +0200
24474 ppc4xx: Code cleanup
24476 Signed-off-by: Stefan Roese <sr@denx.de>
24478 commit c92409812206ac67a7fa7aae298539a9c3804a46
24479 Author: Grzegorz Bernacki <gjb@semihalf.com>
24480 Date: Tue Jul 31 18:51:48 2007 +0200
24482 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
24484 During config transactions on the PCIe bus an attempt to scan for a
24485 non-existent device can lead to a machine check exception with certain
24486 peripheral devices. In order to avoid crashing in such scenarios the
24487 instrumented versions of the config cycle read routines are introduced, so
24488 the exceptions fixups framework can gracefully recover.
24490 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
24491 Acked-by: Rafal Jaworowski <raj@semihalf.com>
24493 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
24494 Author: Rafal Jaworowski <raj@semihalf.com>
24495 Date: Tue Jul 31 18:19:54 2007 +0200
24497 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
24499 This brings back separate settings for PCIe bus numbers depending on chip
24500 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
24501 commit. 440SPe rev. A does NOT work properly with the same settings as for
24502 the rev. B (no devices are seen on the bus during enumeration).
24504 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
24506 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
24507 Author: Wolfgang Denk <wd@denx.de>
24508 Date: Thu Aug 2 00:48:45 2007 +0200
24510 Fix build errors and warnings / code cleanup.
24512 Signed-off-by: Wolfgang Denk <wd@denx.de>
24514 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
24515 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
24516 Date: Tue Jul 31 10:24:56 2007 +0200
24518 ppc4xx: Update AMCC Bamboo 440EP support
24520 Changed storage type of cfg_simulate_spd_eeprom to const
24521 Changed storage type of gpio_tab to stack storage
24522 (Cannot access global data declarations in .bss until afer code relocation)
24524 Improved SDRAM tests to catch problems where data is not uniquely addressable
24525 (e.g. incorrectly programmed SDRAM row or columns)
24527 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
24528 Fixed AM29LV320DT (OpCode Flash) sector map
24530 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
24531 Signed-off-by: Stefan Roese <sr@denx.de>
24533 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
24534 Author: Stefan Roese <sr@denx.de>
24535 Date: Tue Jul 31 08:37:01 2007 +0200
24537 ppc4xx: Update 440EPx lwmon5 board support
24539 - Clear ECC status regs after ECC POST test
24540 - Set dcbz for ECC generation with caches enabled as default
24543 Signed-off-by: Stefan Roese <sr@denx.de>
24545 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
24546 Author: Stefan Roese <sr@denx.de>
24547 Date: Mon Jul 30 11:04:57 2007 +0200
24549 ppc4xx: Only print ECC related info when the error bis are set
24551 Signed-off-by: Stefan Roese <sr@denx.de>
24553 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
24554 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24555 Date: Fri Jul 27 16:44:31 2007 +0200
24557 new FPGA image for PLU405 board
24559 new FPGA image for PLU405 board with improved CompactFlash timing
24561 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24563 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
24564 Author: Rafal Jaworowski <raj@semihalf.com>
24565 Date: Fri Jul 27 14:43:59 2007 +0200
24567 [ADS5121] Support for the ADS5121 board
24569 The following MPC5121e subsystems are supported:
24571 - low-level CPU init
24572 - NOR Boot Flash (common CFI driver)
24578 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
24579 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
24580 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
24582 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
24583 Author: Rafal Jaworowski <raj@semihalf.com>
24584 Date: Fri Jul 27 14:22:04 2007 +0200
24586 [PPC] Remove unused MSR_USER definition
24588 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
24590 commit d4024bb72dd81695ec099b2199eda0d27c623e62
24591 Author: John Otken <john@softadvances.com>
24592 Date: Thu Jul 26 17:49:11 2007 +0200
24594 ppc4xx: Add support for AMCC 405EP Taihu board
24596 Signed-off-by: John Otken <john@softadvances.com>
24598 commit b66091de6c7390620312c2501db23d8391e7cabb
24599 Author: Anatolij Gustschin <agust@denx.de>
24600 Date: Thu Jul 26 15:08:01 2007 +0200
24602 ppc4xx: lwmon5: Update Lime initialization
24604 Change Lime SDRAM initialization to now support 100MHz and
24605 133MHz (if enabled). Also the framebuffer is initialized to
24606 display a blue rectangle with a white border.
24608 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24609 Signed-off-by: Stefan Roese <sr@denx.de>
24611 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
24612 Author: Stefan Roese <sr@denx.de>
24613 Date: Tue Jul 24 09:52:52 2007 +0200
24615 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
24617 The used Intel NOR FLASH chips have internally two dies, and are now
24618 treated as two seperate chips.
24620 Signed-off-by: Stefan Roese <sr@denx.de>
24622 commit aedf5bde179ecfbd0a96130d18996a96518b785f
24623 Author: Stefan Roese <sr@denx.de>
24624 Date: Tue Jul 24 07:20:09 2007 +0200
24626 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
24628 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
24629 interrupt controller.
24631 Signed-off-by: Stefan Roese <sr@denx.de>
24633 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
24634 Author: Stefan Roese <sr@denx.de>
24635 Date: Fri Jul 20 15:03:44 2007 +0200
24637 ppc4xx: Fix bug with default GPIO output value
24639 As spotted by Matthias Fuchs, the default output values for all GPIO1
24640 outputs were not setup correctly. This patch fixes this issue.
24642 Signed-off-by: Stefan Roese <sr@denx.de>
24644 commit 531e3e8b831f357056448fa573137d5fb37000fd
24645 Author: Pavel Kolesnikov <concord@emcraft.com>
24646 Date: Fri Jul 20 15:03:03 2007 +0200
24648 POST: Add ECC POST for the lwmon5 board
24650 This patch adds ECC Post test for the Lwmon5 board based
24651 on PPC440EPx to U-Boot.
24653 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
24654 Acked-by: Yuri Tikhonov <yur@emcraft.com>
24655 Acked-by: Stefan Roese <sr@denx.de>
24657 commit cc3023b9f95d7ac959a764471a65001062aecf41
24658 Author: Rafal Jaworowski <raj@semihalf.com>
24659 Date: Thu Jul 19 17:12:28 2007 +0200
24661 Fix breakage of 8xx boards from recent commit.
24663 This patch fixes the negative consequences for 8xx of the recent
24664 "ppc4xx: Clean up 440 exceptions handling" commit.
24666 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
24668 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
24669 Author: Stefan Roese <sr@denx.de>
24670 Date: Mon Jul 16 13:11:12 2007 +0200
24672 Coding style cleanup
24674 Signed-off-by: Stefan Roese <sr@denx.de>
24676 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
24677 Author: Stefan Roese <sr@denx.de>
24678 Date: Mon Jul 16 10:02:12 2007 +0200
24680 ppc4xx: Code cleanup
24682 Signed-off-by: Stefan Roese <sr@denx.de>
24684 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
24685 Author: Stefan Roese <sr@denx.de>
24686 Date: Mon Jul 16 10:01:38 2007 +0200
24688 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
24690 Signed-off-by: Stefan Roese <sr@denx.de>
24692 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
24693 Author: Stefan Roese <sr@denx.de>
24694 Date: Mon Jul 16 10:00:43 2007 +0200
24696 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
24698 The new boardspecific DDR2 controller configuration is used for the Yucca
24699 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
24701 Signed-off-by: Stefan Roese <sr@denx.de>
24703 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
24704 Author: Stefan Roese <sr@denx.de>
24705 Date: Mon Jul 16 09:57:00 2007 +0200
24707 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
24709 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
24710 support non default, boardspecific DDR(2) controller configuration.
24712 Signed-off-by: Stefan Roese <sr@denx.de>
24714 commit 5743a9207a370b90f09b20ebd61167c806b937f3
24715 Author: Stefan Roese <sr@denx.de>
24716 Date: Mon Jul 16 08:53:51 2007 +0200
24718 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
24720 The new function remove_tlb() can be used to remove the TLB's used to
24721 map a specific memory region. This is especially useful for the DDR(2)
24722 setup routines which configure the SDRAM area temporarily as a cached
24723 area (for speedup on auto-calibration and ECC generation) and later
24724 need this area uncached for normal usage.
24726 Signed-off-by: Stefan Roese <sr@denx.de>
24728 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
24729 Author: Michal Simek <monstr@monstr.eu>
24730 Date: Mon Jul 16 00:31:07 2007 +0200
24732 [PATCH] Support for Xilinx EmacLite controller
24734 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
24735 Author: Wolfgang Denk <wd@denx.de>
24736 Date: Sat Jul 14 22:51:02 2007 +0200
24740 Signed-off-by: Wolfgang Denk <wd@denx.de>
24742 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
24743 Author: Michal Simek <monstr@monstr.eu>
24744 Date: Sat Jul 14 13:11:28 2007 +0200
24746 [FIX] support for simply measuring time
24748 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
24749 Author: Michal Simek <monstr@monstr.eu>
24750 Date: Sat Jul 14 12:41:23 2007 +0200
24752 [FS] Added support for ROMFS
24754 commit 011595307731a7a67a7445d107c279d031e8ab97
24755 Author: Heiko Schocher <hs@pollux.denx.de>
24756 Date: Sat Jul 14 01:06:58 2007 +0200
24758 [PCS440EP] - fix compile error, if BUILD_DIR is used
24760 commit 5a2f1098d81ad58b309e5e558d0492643166a799
24761 Author: Michal Simek <monstr@monstr.eu>
24762 Date: Sat Jul 14 00:18:48 2007 +0200
24764 [PATCH] Support time without timer
24766 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
24767 Author: Michal Simek <monstr@monstr.eu>
24768 Date: Fri Jul 13 21:43:55 2007 +0200
24770 [PATCH] Remove problem with disabled BARREL SHIFTER
24772 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
24773 Author: Michal Simek <monstr@monstr.eu>
24774 Date: Fri Jul 13 21:41:44 2007 +0200
24776 [FIX] correct help for rspr
24778 commit fad63407154f46246ce80d53a9c669a44362ac67
24779 Author: Heiko Schocher <hs@pollux.denx.de>
24780 Date: Fri Jul 13 09:54:17 2007 +0200
24782 make show_boot_progress () weak.
24784 Signed-off-by: Heiko Schocher <hs@denx.de>
24786 commit 907902472391b6ca1876ec300687562ecaf459b1
24787 Author: Heiko Schocher <hs@pollux.denx.de>
24788 Date: Fri Jul 13 08:26:05 2007 +0200
24790 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
24791 - fix compile error, if BUILD_DIR is used
24793 Signed-off-by: Heiko Schocher <hs@denx.de>
24795 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
24796 Author: Stefan Roese <sr@denx.de>
24797 Date: Thu Jul 12 16:32:08 2007 +0200
24799 ppc4xx: Change receive buffer handling in the 4xx emac driver
24801 This change fixes a bug in the receive buffer handling, that
24802 could lead to problems upon high network traffic (broadcasts...).
24804 Signed-off-by: Stefan Roese <sr@denx.de>
24806 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
24807 Author: Wolfgang Denk <wd@denx.de>
24808 Date: Thu Jul 12 01:45:34 2007 +0200
24810 Update CHANGELOG, minor coding style cleanup.
24812 Signed-off-by: Wolfgang Denk <wd@denx.de>
24814 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
24815 Author: Andy Fleming <afleming@freescale.com>
24816 Date: Fri Jun 8 16:41:18 2007 -0500
24818 Remove erroneous errata code from Marvel 88E1111S driver
24820 The Marvel 88E1111S driver for the TSEC was copied from the
24821 88E1101 driver, and included a fix for an erratum which does not
24822 exist on that part. Now it is removed
24824 Signed-off-by: Andy Fleming <afleming@freescale.com>
24826 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
24827 Author: Andy Fleming <afleming@freescale.com>
24828 Date: Tue Jun 5 16:38:44 2007 -0500
24830 From: eran liberty <eran.liberty@gmail.com>
24832 adds the reset register to 85xx immap
24834 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
24835 Signed-off-by: Andy Fleming <afleming@freescale.com>
24837 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
24838 Author: Andy Fleming <afleming@freescale.com>
24839 Date: Thu May 10 17:50:01 2007 -0500
24841 Polished the 85xx ADS config files
24843 Made the boot commands use device trees by default.
24844 Also moved the ramdisk to 1000000 (I think the previous address
24845 was getting overridden during boot).
24847 Signed-off-by: Andy Fleming <afleming@freescale.com>
24849 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
24850 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
24851 Date: Wed May 9 11:03:32 2007 -0500
24853 8544ds: Fix Makefile after moving pixis to board/freescale.
24855 The OBJTREE != SRCTREE build scenario was broken.
24858 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
24859 Signed-off-by: Jon Loeliger <jdl@freescale.com>
24861 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
24862 Author: Andy Fleming <afleming@freescale.com>
24863 Date: Wed May 9 00:54:20 2007 -0500
24865 tsec: Fix PHY code to match first driver
24867 Jarrold Wen noticed that the generic PHY code always matches
24868 under the current implementation. Change it so the first match
24869 wins, and *only* unknown PHYs trigger the generic driver
24871 Signed-off-by: Andy Fleming <afleming@freescale.com>
24873 commit ccc091aac61a38cd998d575d92f7232e256d6312
24874 Author: Andy Fleming <afleming@freescale.com>
24875 Date: Tue May 8 17:27:43 2007 -0500
24877 Add support for CPM device tree configuration to 8560 ADS
24879 * Adds code to modify CPM frequencies
24880 * Cleans up the config file to #define TSEC and (for now) #undef FCC
24881 * Adds the MII command for all 8560 ADS configurations
24882 * Updates config file to provide convenience commands for booting
24885 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
24886 Signed-off-by: Andy Fleming <afleming@freescale.com>
24888 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
24889 Author: Andy Fleming <afleming@freescale.com>
24890 Date: Tue May 8 17:23:02 2007 -0500
24892 Fix Marvell 88e1145 PHY init code
24894 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
24895 where the reset was being done after the errata code instead of
24898 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
24899 Signed-off-by: Andy Fleming <afleming@freescale.com>
24901 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
24902 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
24903 Date: Wed Jul 11 14:52:16 2007 -0500
24905 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
24907 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
24909 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
24910 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
24911 Date: Wed Jul 11 14:52:08 2007 -0500
24913 pciauto setup bridge
24915 The P2P bridge bus numbers programmed into the device are relative to
24918 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
24920 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
24921 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
24922 Date: Wed Jul 11 14:52:01 2007 -0500
24924 Support PCIe extended config registers
24926 FSL PCIe block has extended cfg registers in the 100 and 400 range.
24927 For example, to read the LTSSM register: pci display <busn>.0 404 1
24929 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
24931 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
24932 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
24933 Date: Wed Jul 11 14:51:48 2007 -0500
24935 Minor improvements to drivers/pci_auto.c
24937 - Make pciauto_{pre,post}scan_setup_bridge non-static
24938 - Added physical address display in debug messages.
24940 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
24942 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
24943 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
24944 Date: Wed Jul 11 14:51:35 2007 -0500
24946 Start pci hose scan from hose->current_busno.
24948 Ensure hose->current_busno is not less than first_busno. This fixes
24949 broken board code which leaves current_busno=0 when first_busno is
24950 greater than 0 for the cases with multiple controllers.
24952 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
24954 commit 3865b1fb7843a08ad49a6319a36415752276ff48
24955 Author: Stefan Roese <sr@denx.de>
24956 Date: Wed Jul 11 12:13:53 2007 +0200
24958 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
24960 Signed-off-by: Stefan Roese <sr@denx.de>
24962 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
24963 Author: Bartlomiej Sieka <tur@semihalf.com>
24964 Date: Wed Jul 11 20:11:07 2007 +0200
24966 CM1.QP1: Support for the Schindler CM1.QP1 board.
24968 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
24969 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
24971 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
24972 Author: Heiko Schocher <hs@pollux.denx.de>
24973 Date: Wed Jul 11 18:39:11 2007 +0200
24975 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
24976 - now the Flash ST M29W040B is supported (not tested)
24977 - fix the "led" command
24978 - fix compile error, if BUILD_DIR is used
24980 Signed-off-by: Heiko Schocher <hs@denx.de>
24982 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
24983 Author: Stefan Roese <sr@denx.de>
24984 Date: Sun Jul 8 13:44:27 2007 +0200
24986 Fix malloc problem introduced with the relocation fixup for the PPC platform
24988 The relocation fixup didn't handle the malloc pointer initialization
24989 correctly. This patch fixes this problem. Tested successfully on 4xx.
24990 The relocation fixup patches for 4xx will follow soon.
24992 Signed-off-by: Stefan Roese <sr@denx.de>
24994 commit 0dca874db62718e41253659e60f3a1de7eb418ce
24995 Author: TsiChung <tcliew@Goku.(none)>
24996 Date: Tue Jul 10 15:45:43 2007 -0500
24998 Cache update and added CFG_UNIFY_CACHE
25000 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
25002 Signed-off-by: TsiChung <tcliew@Goku.(none)>
25004 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
25005 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25006 Date: Thu Jul 5 23:36:16 2007 -0500
25008 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
25010 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
25012 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25014 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
25015 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25016 Date: Thu Jul 5 23:31:25 2007 -0500
25018 Update header files
25020 Include immap.h and renamed mcfrtc.h to rtc.h
25022 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25024 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
25025 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25026 Date: Thu Jul 5 23:29:21 2007 -0500
25028 Add mcffec_initialize()
25030 Added mcffec_initialize() in eth_initialize()
25032 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25034 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
25035 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25036 Date: Thu Jul 5 23:27:40 2007 -0500
25038 Update header file and clean up
25042 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25044 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
25045 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25046 Date: Thu Jul 5 23:23:15 2007 -0500
25048 New uart structure and defines
25050 Seperated from mcfuart.h
25052 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25054 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
25055 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25056 Date: Thu Jul 5 23:22:31 2007 -0500
25058 New timer structure and defines
25060 Seperated from mcftimer.h
25062 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25064 commit e04acb2eba4782489417240eff76e20e176aec10
25065 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25066 Date: Thu Jul 5 23:21:09 2007 -0500
25068 Rename mcfrtc to rtc
25070 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
25072 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25074 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
25075 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25076 Date: Thu Jul 5 23:17:36 2007 -0500
25078 Rename mcfserial.c. Update include header
25080 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
25082 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25084 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
25085 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25086 Date: Thu Jul 5 23:13:58 2007 -0500
25088 Header file update, clean up and cache handling
25090 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
25092 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25094 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
25095 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25096 Date: Thu Jul 5 23:10:40 2007 -0500
25098 Create interrupts.c and modify Makefile
25100 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
25102 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25104 commit ddd104f1ed655eda50c06ba636237a83ed943f34
25105 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25106 Date: Thu Jul 5 23:06:55 2007 -0500
25110 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25112 commit b9bf3de377b2bae70c983c9b97feae914999e735
25113 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25114 Date: Thu Jul 5 23:05:31 2007 -0500
25116 Update header file and some clean up
25118 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
25120 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25122 commit 84a015b52ec820a5ae173717d78516de731c89c2
25123 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25124 Date: Thu Jul 5 23:03:28 2007 -0500
25126 Update header file and enable icache
25128 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
25130 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25132 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
25133 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25134 Date: Thu Jul 5 23:01:22 2007 -0500
25136 Update header file and removed interrupt_init()
25138 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
25140 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25142 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
25143 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25144 Date: Thu Jul 5 22:57:46 2007 -0500
25146 Update for flash.o and mii.o
25148 Removed flash.o and added mii.o
25150 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25152 commit c5ded275d839e4ff79f41718d50a835d989f57bc
25153 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25154 Date: Thu Jul 5 22:56:19 2007 -0500
25156 MII functions calls.
25158 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25160 commit 427c814104560e29bda14955c67703245aaaa5b4
25161 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25162 Date: Thu Jul 5 22:54:42 2007 -0500
25164 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
25166 The removed MII routines will be placed in mii.c.
25168 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25170 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
25171 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25172 Date: Thu Jul 5 22:51:05 2007 -0500
25176 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
25178 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25180 commit 2744354a8437b8f78db178e30660215688bff570
25181 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25182 Date: Thu Jul 5 22:46:38 2007 -0500
25184 Seperate old structure defines and new structure defines
25186 Removed new uart structure and defines to uart.h
25188 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25190 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
25191 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25192 Date: Thu Jul 5 22:45:01 2007 -0500
25194 Seperate old structure defines and new structure defines
25196 New timer structure and defines will move to new timer.h
25198 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25200 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
25201 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25202 Date: Thu Jul 5 22:42:23 2007 -0500
25208 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25210 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
25211 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25212 Date: Thu Jul 5 22:41:24 2007 -0500
25216 Replaced whitespace with tabs
25218 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25220 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
25221 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25222 Date: Thu Jul 5 22:39:07 2007 -0500
25224 Create new header file and move peripherals base address from configs file to new header file.
25226 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
25228 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25230 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
25231 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25232 Date: Thu Jul 5 22:24:58 2007 -0500
25236 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
25238 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
25240 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
25241 Author: Jon Loeliger <jdl@freescale.com>
25242 Date: Tue Jul 10 11:19:50 2007 -0500
25244 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
25246 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25247 Those always evaluated TRUE, and thus were always compiled
25248 even when IDE really wasn't defined/wanted.
25250 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25252 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
25253 Author: Jon Loeliger <jdl@freescale.com>
25254 Date: Tue Jul 10 11:13:21 2007 -0500
25256 drivers/: Remove lingering references to CFG_CMD_* symbols.
25258 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25259 Those always evaluated TRUE, and thus were always compiled
25260 even when IDE really wasn't defined/wanted.
25262 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25264 commit f40a7f3e3888b42a43674b099e5470022c8c544c
25265 Author: Jon Loeliger <jdl@freescale.com>
25266 Date: Tue Jul 10 11:07:56 2007 -0500
25268 fs/: Remove lingering references to CFG_CMD_* symbols.
25270 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25271 Those always evaluated TRUE, and thus were always compiled
25272 even when IDE really wasn't defined/wanted.
25274 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25276 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
25277 Author: Jon Loeliger <jdl@freescale.com>
25278 Date: Tue Jul 10 11:05:02 2007 -0500
25280 net/: Remove lingering references to CFG_CMD_* symbols.
25282 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25283 Those always evaluated TRUE, and thus were always compiled
25284 even when IDE really wasn't defined/wanted.
25286 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25288 commit 902531788376046da212afd1661cffb62f3daa1c
25289 Author: Jon Loeliger <jdl@freescale.com>
25290 Date: Tue Jul 10 11:02:44 2007 -0500
25292 common/: Remove lingering references to CFG_CMD_* symbols.
25294 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25295 Those always evaluated TRUE, and thus were always compiled
25296 even when IDE really wasn't defined/wanted.
25298 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25300 commit d39b57415838c73fb0a37eca84de3c68ba990586
25301 Author: Jon Loeliger <jdl@freescale.com>
25302 Date: Tue Jul 10 10:48:22 2007 -0500
25304 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
25306 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25307 Those always evaluated TRUE, and thus were always compiled
25308 even when IDE really wasn't defined/wanted.
25310 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25312 commit 77a318545d57aefa844752465b94c7e09a3f26d0
25313 Author: Jon Loeliger <jdl@freescale.com>
25314 Date: Tue Jul 10 10:39:10 2007 -0500
25316 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
25318 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
25319 Those always evaluated TRUE, and thus were always compiled
25320 even when IDE really wasn't defined/wanted.
25322 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25324 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
25325 Author: Jon Loeliger <jdl@freescale.com>
25326 Date: Tue Jul 10 10:27:39 2007 -0500
25328 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
25330 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25332 commit 079a136c3588814784561d6e4856970ee82d6e2a
25333 Author: Jon Loeliger <jdl@freescale.com>
25334 Date: Tue Jul 10 10:12:10 2007 -0500
25336 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
25338 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25339 used to be included but CONFIG_BOOTP_MASK was not defined.
25341 Remove lingering references to CFG_CMD_* symbols.
25343 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25345 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
25346 Author: Jon Loeliger <jdl@freescale.com>
25347 Date: Tue Jul 10 09:38:02 2007 -0500
25349 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
25351 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25352 used to be included but CONFIG_BOOTP_MASK was not defined.
25354 Remove lingering references to CFG_CMD_* symbols.
25356 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25358 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
25359 Author: Jon Loeliger <jdl@freescale.com>
25360 Date: Tue Jul 10 09:29:01 2007 -0500
25362 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
25364 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25365 used to be included but CONFIG_BOOTP_MASK was not defined.
25367 Remove lingering references to CFG_CMD_* symbols.
25369 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25371 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
25372 Author: Jon Loeliger <jdl@freescale.com>
25373 Date: Tue Jul 10 09:22:23 2007 -0500
25375 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
25377 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25378 used to be included but CONFIG_BOOTP_MASK was not defined.
25380 Remove lingering references to CFG_CMD_* symbols.
25382 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25384 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
25385 Author: Jon Loeliger <jdl@freescale.com>
25386 Date: Tue Jul 10 09:10:49 2007 -0500
25388 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
25390 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25391 used to be included but CONFIG_BOOTP_MASK was not defined.
25393 Remove lingering references to CFG_CMD_* symbols.
25395 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25397 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
25398 Author: Jon Loeliger <jdl@freescale.com>
25399 Date: Tue Jul 10 09:02:57 2007 -0500
25401 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
25403 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
25404 used to be included but CONFIG_BOOTP_MASK was not defined.
25406 Remove lingering references to CFG_CMD_* symbols.
25408 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25410 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
25411 Author: Jon Loeliger <jdl@freescale.com>
25412 Date: Mon Jul 9 22:08:34 2007 -0500
25414 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
25416 All of the choices for CONFIG_BOOTP_ are now documented in
25417 the README file. You must now individually select exactly
25418 the set that you want using a series of
25419 #define CONFIG_BOOTP_<x>
25420 statements in the board port config files now.
25422 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25424 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
25425 Author: Jon Loeliger <jdl@freescale.com>
25426 Date: Mon Jul 9 21:57:31 2007 -0500
25428 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25430 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25432 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
25433 Author: Jon Loeliger <jdl@freescale.com>
25434 Date: Mon Jul 9 21:48:26 2007 -0500
25436 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25438 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25440 commit 37d4bb70586659dedef1658ce1bed071be098aec
25441 Author: Jon Loeliger <jdl@freescale.com>
25442 Date: Mon Jul 9 21:38:02 2007 -0500
25444 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25446 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25448 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
25449 Author: Jon Loeliger <jdl@freescale.com>
25450 Date: Mon Jul 9 21:31:24 2007 -0500
25452 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25454 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25456 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
25457 Author: Jon Loeliger <jdl@freescale.com>
25458 Date: Mon Jul 9 21:24:19 2007 -0500
25460 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25462 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25464 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
25465 Author: Jon Loeliger <jdl@freescale.com>
25466 Date: Mon Jul 9 21:16:53 2007 -0500
25468 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
25470 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25472 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
25473 Author: Jon Loeliger <jdl@freescale.com>
25474 Date: Mon Jul 9 19:12:30 2007 -0500
25476 Retire CONFIG_COMMANDS finally.
25477 Strip old CFG_CMD_* symbols out.
25479 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25481 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
25482 Author: Jon Loeliger <jdl@freescale.com>
25483 Date: Mon Jul 9 19:10:03 2007 -0500
25485 Update README.* to reference new CONFIG_CMD_* names now.
25487 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25489 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
25490 Author: Jon Loeliger <jdl@freescale.com>
25491 Date: Mon Jul 9 19:06:00 2007 -0500
25493 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
25495 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25497 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
25498 Author: Jon Loeliger <jdl@freescale.com>
25499 Date: Mon Jul 9 18:57:22 2007 -0500
25501 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
25503 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25505 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
25506 Author: Jon Loeliger <jdl@freescale.com>
25507 Date: Mon Jul 9 18:45:16 2007 -0500
25509 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
25511 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25513 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
25514 Author: Jon Loeliger <jdl@freescale.com>
25515 Date: Mon Jul 9 18:38:39 2007 -0500
25517 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
25519 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25521 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
25522 Author: Jon Loeliger <jdl@freescale.com>
25523 Date: Mon Jul 9 18:31:28 2007 -0500
25525 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
25527 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25529 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
25530 Author: Jon Loeliger <jdl@freescale.com>
25531 Date: Mon Jul 9 18:24:55 2007 -0500
25533 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
25535 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25537 commit fcec2eb93e126400009729328e797f12bc94f1fd
25538 Author: Jon Loeliger <jdl@freescale.com>
25539 Date: Mon Jul 9 18:19:09 2007 -0500
25541 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
25543 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25545 commit a593814f2be0c9cdc3133cd550b167b8a988328f
25546 Author: Jon Loeliger <jdl@freescale.com>
25547 Date: Mon Jul 9 18:10:50 2007 -0500
25549 rtc/: Remove obsolete references to CONFIG_COMMANDS
25551 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25553 commit 67350568f9d46e66c21829f3513b3db0caeb948b
25554 Author: Jon Loeliger <jdl@freescale.com>
25555 Date: Mon Jul 9 18:05:38 2007 -0500
25557 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
25559 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25561 commit 7def6b34f910f08d7ef0a14646da067719237ca2
25562 Author: Jon Loeliger <jdl@freescale.com>
25563 Date: Mon Jul 9 18:02:11 2007 -0500
25565 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
25567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25569 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
25570 Author: Jon Loeliger <jdl@freescale.com>
25571 Date: Mon Jul 9 17:56:50 2007 -0500
25573 fs/: Remove obsolete references to CONFIG_COMMANDS
25575 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25577 commit c91898bbc505aff3e12a807af88e76da18efb7ee
25578 Author: Jon Loeliger <jdl@freescale.com>
25579 Date: Mon Jul 9 17:46:09 2007 -0500
25581 tools/: Remove obsolete references to CONFIG_COMMANDS
25583 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25585 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
25586 Author: Jon Loeliger <jdl@freescale.com>
25587 Date: Mon Jul 9 17:45:14 2007 -0500
25589 net/: Remove obsolete references to CONFIG_COMMANDS
25591 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25593 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
25594 Author: Jon Loeliger <jdl@freescale.com>
25595 Date: Mon Jul 9 17:39:42 2007 -0500
25597 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
25599 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25601 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
25602 Author: Jon Loeliger <jdl@freescale.com>
25603 Date: Mon Jul 9 17:30:01 2007 -0500
25605 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
25607 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25609 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
25610 Author: Jon Loeliger <jdl@freescale.com>
25611 Date: Mon Jul 9 17:22:37 2007 -0500
25613 disk/: Remove obsolete references to CONFIG_COMMANDS
25615 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25617 commit 639221c76c88215bd55af83ad174fc30d1940f8f
25618 Author: Jon Loeliger <jdl@freescale.com>
25619 Date: Mon Jul 9 17:15:49 2007 -0500
25621 include/: Remove obsolete references to CONFIG_COMMANDS
25622 Mostly removed from comments here.
25624 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25626 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
25627 Author: Wolfgang Denk <wd@denx.de>
25628 Date: Tue Jul 10 00:01:28 2007 +0200
25630 Coding style cleanup; update CHANGELOG.
25632 Signed-off-by: Wolfgang Denk <wd@denx.de>
25634 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
25635 Author: Stefan Roese <sr@denx.de>
25636 Date: Mon Jul 9 11:00:24 2007 +0200
25638 Small coding style cleanup
25640 Signed-off-by: Stefan Roese <sr@denx.de>
25642 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
25643 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25644 Date: Mon Jul 9 10:10:08 2007 +0200
25646 Migrate esd 405EP boards to new NAND subsystem
25648 Remove unused CFG_NAND_LEGACY define
25650 These boards to not have NAND.
25652 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25654 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
25655 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25656 Date: Mon Jul 9 10:10:06 2007 +0200
25658 Migrate esd 405EP boards to new NAND subsystem
25660 Migrate esd 405EP boards to new NAND subsystem
25663 -use correct io accessors (in/out_be32())
25665 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25667 commit e09f7ab5749c345f924da272bea0521a73af5b11
25668 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25669 Date: Mon Jul 9 10:10:04 2007 +0200
25671 Migrate esd 405EP boards to new NAND subsystem
25673 This patch prepares the migration from the legacy NAND driver
25674 to U-Boot's new NAND subsystem for esd boards.
25676 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25678 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
25679 Author: Jon Loeliger <jdl@freescale.com>
25680 Date: Sun Jul 8 18:10:08 2007 -0500
25682 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
25684 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25686 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
25687 Author: Jon Loeliger <jdl@freescale.com>
25688 Date: Sun Jul 8 18:05:39 2007 -0500
25690 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
25692 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25694 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
25695 Author: Jon Loeliger <jdl@freescale.com>
25696 Date: Sun Jul 8 18:02:23 2007 -0500
25698 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
25700 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25702 commit baa26db4113679b80970ff447d91cc10217742a6
25703 Author: Jon Loeliger <jdl@freescale.com>
25704 Date: Sun Jul 8 17:51:39 2007 -0500
25706 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
25708 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25710 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
25711 Author: Jon Loeliger <jdl@freescale.com>
25712 Date: Sun Jul 8 17:02:01 2007 -0500
25714 Clear up confusion over the CMD_POST and POST_DIAG mess.
25716 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
25717 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
25718 Clear this mess up some.
25720 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25722 commit b3631487105a57ab7cbadfc26efbaf9676275018
25723 Author: Jon Loeliger <jdl@freescale.com>
25724 Date: Sun Jul 8 15:45:08 2007 -0500
25726 Remove references to the old cmd_confdefs.h include file.
25728 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25730 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
25731 Author: Jon Loeliger <jdl@freescale.com>
25732 Date: Sun Jul 8 15:42:59 2007 -0500
25734 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
25736 Use new CONFIG_CMD_* in lwmon5.h board config file.
25737 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
25739 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25741 commit a5562901661bd428f7e5feb333f796372cb81019
25742 Author: Jon Loeliger <jdl@freescale.com>
25743 Date: Sun Jul 8 15:31:57 2007 -0500
25745 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
25747 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25749 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
25750 Author: Jon Loeliger <jdl@freescale.com>
25751 Date: Sun Jul 8 15:02:44 2007 -0500
25753 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
25755 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25757 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
25758 Author: Jon Loeliger <jdl@freescale.com>
25759 Date: Sun Jul 8 15:12:40 2007 -0500
25761 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
25763 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25765 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
25766 Author: Jon Loeliger <jdl@freescale.com>
25767 Date: Sun Jul 8 14:55:07 2007 -0500
25769 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
25771 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25773 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
25774 Author: Jon Loeliger <jdl@freescale.com>
25775 Date: Sun Jul 8 14:49:44 2007 -0500
25777 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
25779 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25781 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
25782 Author: Jon Loeliger <jdl@freescale.com>
25783 Date: Sun Jul 8 14:21:43 2007 -0500
25785 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
25787 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25789 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
25790 Author: Jon Loeliger <jdl@freescale.com>
25791 Date: Sun Jul 8 14:14:17 2007 -0500
25793 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
25795 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25797 commit 348f258f24253433e4a2302a0bbceb6740a67246
25798 Author: Jon Loeliger <jdl@freescale.com>
25799 Date: Sun Jul 8 13:46:18 2007 -0500
25801 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
25803 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25805 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
25806 Author: Jon Loeliger <jdl@freescale.com>
25807 Date: Sun Jul 8 10:09:35 2007 -0500
25809 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
25811 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25813 commit 60a0876b5106b34220e459c208bbf648073306c0
25814 Author: Jon Loeliger <jdl@freescale.com>
25815 Date: Sat Jul 7 21:04:26 2007 -0500
25817 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
25819 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25821 commit dcaa71562826a2466e894c868d132509dcda8444
25822 Author: Jon Loeliger <jdl@freescale.com>
25823 Date: Sat Jul 7 20:56:05 2007 -0500
25825 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
25827 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25829 commit 3c3227f3c737502311b25b72084573901cbbf17d
25830 Author: Jon Loeliger <jdl@freescale.com>
25831 Date: Sat Jul 7 20:40:43 2007 -0500
25833 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
25835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25837 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
25838 Author: Jon Loeliger <jdl@freescale.com>
25839 Date: Thu Jul 5 19:52:35 2007 -0500
25841 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
25843 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25845 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
25846 Author: Jon Loeliger <jdl@freescale.com>
25847 Date: Thu Jul 5 19:32:07 2007 -0500
25849 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
25851 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25853 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
25854 Author: Jon Loeliger <jdl@freescale.com>
25855 Date: Thu Jul 5 19:13:52 2007 -0500
25857 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
25859 Since ADS860.h includes "board/fads/fads.h" with ramifications
25860 on the CONFIG_COMMAND treatment, it too has to be adjusted to
25861 exclude already configured commands in this same commit.
25863 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25865 commit 10e038932f22ee80ebd53de312531e70e6590a2f
25866 Author: Thomas Knobloch <knobloch@siemens.com>
25867 Date: Fri Jul 6 14:58:39 2007 +0200
25869 [NAND] Bad block skipping for command nboot
25871 The old implementation of command nboot does not support reading the image from
25872 NAND flash with skipping of bad blocks. The patch implements a new version of
25873 the nboot command: by calling nboot.jffs2 from the u-boot command line the
25874 command will load the image from NAND flash with respect to bad blocks (by using
25875 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
25878 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
25879 Signed-off-by: Stefan Roese <sr@denx.de>
25881 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
25882 Author: Stefan Roese <sr@denx.de>
25883 Date: Fri Jul 6 12:26:51 2007 +0200
25885 ppc4xx: Update lwmon5 default environment
25887 Signed-off-by: Stefan Roese <sr@denx.de>
25889 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
25890 Author: Stefan Roese <sr@denx.de>
25891 Date: Fri Jul 6 11:48:24 2007 +0200
25893 ppc4xx: Update lwmon5 board
25895 Add unlock=yes environment variable to default variables to unlock
25896 the CFI flash by default.
25898 Signed-off-by: Stefan Roese <sr@denx.de>
25900 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
25901 Author: Stefan Roese <sr@denx.de>
25902 Date: Fri Jul 6 09:45:47 2007 +0200
25904 Fix problem with get/setdcr commands introduced by cfg patches
25906 Signed-off-by: Stefan Roese <sr@denx.de>
25908 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
25909 Author: Wolfgang Denk <wd@denx.de>
25910 Date: Fri Jul 6 02:50:19 2007 +0200
25912 Code cleanup and default config update for STC GP3 SSA board.
25914 Signed-off-by: Wolfgang Denk <wd@denx.de>
25916 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
25917 Author: Wolfgang Denk <wd@denx.de>
25918 Date: Thu Jul 5 17:56:27 2007 +0200
25920 Fixing some typos etc. introduced mainly by cfg patches.
25922 Signed-off-by: Wolfgang Denk <wd@denx.de>
25924 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
25925 Author: Wolfgang Denk <wd@denx.de>
25926 Date: Thu Jul 5 11:12:16 2007 +0200
25928 Minor coding style cleanup. Update CHANGELOG.
25930 commit dca3b3d6d6396b67e5e84af53452164923c73443
25931 Author: Jon Loeliger <jdl@jdl.com>
25932 Date: Wed Jul 4 22:33:46 2007 -0500
25934 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
25936 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25938 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
25939 Author: Jon Loeliger <jdl@jdl.com>
25940 Date: Wed Jul 4 22:33:38 2007 -0500
25942 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
25944 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25946 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
25947 Author: Jon Loeliger <jdl@jdl.com>
25948 Date: Wed Jul 4 22:33:30 2007 -0500
25950 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
25952 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25954 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
25955 Author: Jon Loeliger <jdl@jdl.com>
25956 Date: Wed Jul 4 22:33:23 2007 -0500
25958 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
25960 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25962 commit 26a34560d56a9df5bc2ae23525d9229736134757
25963 Author: Jon Loeliger <jdl@jdl.com>
25964 Date: Wed Jul 4 22:33:17 2007 -0500
25966 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
25968 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25970 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
25971 Author: Jon Loeliger <jdl@jdl.com>
25972 Date: Wed Jul 4 22:33:13 2007 -0500
25974 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
25976 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25978 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
25979 Author: Jon Loeliger <jdl@jdl.com>
25980 Date: Wed Jul 4 22:33:07 2007 -0500
25982 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
25984 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25986 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
25987 Author: Jon Loeliger <jdl@jdl.com>
25988 Date: Wed Jul 4 22:33:01 2007 -0500
25990 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
25992 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25994 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
25995 Author: Jon Loeliger <jdl@jdl.com>
25996 Date: Wed Jul 4 22:32:57 2007 -0500
25998 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
26000 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26002 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
26003 Author: Jon Loeliger <jdl@jdl.com>
26004 Date: Wed Jul 4 22:32:51 2007 -0500
26006 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
26008 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26010 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
26011 Author: Jon Loeliger <jdl@jdl.com>
26012 Date: Wed Jul 4 22:32:32 2007 -0500
26014 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
26016 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26018 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
26019 Author: Jon Loeliger <jdl@jdl.com>
26020 Date: Wed Jul 4 22:32:25 2007 -0500
26022 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
26024 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26026 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
26027 Author: Jon Loeliger <jdl@jdl.com>
26028 Date: Wed Jul 4 22:32:19 2007 -0500
26030 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
26032 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26034 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
26035 Author: Jon Loeliger <jdl@jdl.com>
26036 Date: Wed Jul 4 22:32:10 2007 -0500
26038 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
26040 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26042 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
26043 Author: Jon Loeliger <jdl@jdl.com>
26044 Date: Wed Jul 4 22:32:03 2007 -0500
26046 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
26048 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26050 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
26051 Author: Jon Loeliger <jdl@jdl.com>
26052 Date: Wed Jul 4 22:31:56 2007 -0500
26054 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
26056 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26058 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
26059 Author: Jon Loeliger <jdl@jdl.com>
26060 Date: Wed Jul 4 22:31:49 2007 -0500
26062 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
26064 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26066 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
26067 Author: Jon Loeliger <jdl@jdl.com>
26068 Date: Wed Jul 4 22:31:42 2007 -0500
26070 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
26072 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26074 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
26075 Author: Jon Loeliger <jdl@jdl.com>
26076 Date: Wed Jul 4 22:31:35 2007 -0500
26078 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
26080 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26082 commit d794cfefead5fc177cf4f41164e80382e9c9484a
26083 Author: Jon Loeliger <jdl@jdl.com>
26084 Date: Wed Jul 4 22:31:15 2007 -0500
26086 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
26088 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26090 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
26091 Author: Jon Loeliger <jdl@jdl.com>
26092 Date: Wed Jul 4 22:31:07 2007 -0500
26094 include/configs: Use new CONFIG_CMD_* in STx board config files.
26096 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26098 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
26099 Author: Jon Loeliger <jdl@jdl.com>
26100 Date: Wed Jul 4 22:30:58 2007 -0500
26102 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
26104 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26106 commit 2694690e285acaa34922f55f4b5ae030da60c55a
26107 Author: Jon Loeliger <jdl@jdl.com>
26108 Date: Wed Jul 4 22:30:50 2007 -0500
26110 include/configs: Use new CONFIG_CMD_* in TQM board config files.
26112 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26114 commit 1cc4c458329765b58e584a19821e796b3c10e976
26115 Author: Jon Loeliger <jdl@jdl.com>
26116 Date: Wed Jul 4 22:30:28 2007 -0500
26118 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
26120 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26122 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
26123 Author: Jon Loeliger <jdl@jdl.com>
26124 Date: Wed Jul 4 22:30:06 2007 -0500
26126 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
26128 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26130 commit b44896215a09c60fa40cae906f7ed207bbc2c492
26131 Author: Sergei Poselenov <sposelenov@emcraft.com>
26132 Date: Thu Jul 5 08:17:37 2007 +0200
26134 Merged POST framework with the current TOT.
26136 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
26138 commit b24629fa377214d63bb40d1360e354b6d3e4af56
26139 Author: Jon Loeliger <jdl@jdl.com>
26140 Date: Wed Jun 13 13:23:15 2007 -0500
26142 mpc86xx: Remove old CFG_CMD_* references.
26144 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26146 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
26147 Author: Jon Loeliger <jdl@jdl.com>
26148 Date: Wed Jun 13 13:22:54 2007 -0500
26150 Add MPC8568MDS to MAKEALL 85xx target.
26152 It was missing from the original port submission.
26154 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26156 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
26157 Author: Jon Loeliger <jdl@jdl.com>
26158 Date: Wed Jun 13 13:22:08 2007 -0500
26160 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
26162 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26164 commit 56b304ac2091689506088a9ae67f63fd6300cf16
26165 Author: Jon Loeliger <jdl@jdl.com>
26166 Date: Wed Jun 13 13:21:37 2007 -0500
26168 Fix #if typo in CONFIG_CMD_* changes.
26170 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26172 commit f780b83316d9af1f61d71cc88b1917b387b9b995
26173 Author: Niklaus Giger <niklausgiger@gmx.ch>
26174 Date: Wed Jun 27 18:11:38 2007 +0200
26176 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
26178 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
26180 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
26181 Author: Stefan Roese <sr@denx.de>
26182 Date: Wed Jul 4 10:06:30 2007 +0200
26184 ppc4xx: Update lwmon5 board
26186 - Add optional ECC generation routine to preserve existing
26187 RAM values. This is needed for the Linux log-buffer support
26188 - Add optional DDR2 setup with CL=4
26189 - GPIO50 not used anymore
26190 - Lime register setup added
26192 Signed-off-by: Stefan Roese <sr@denx.de>
26194 commit 6810a34677dbc446334f5e451f1682426dd33b49
26195 Author: Grant Likely <grant.likely@secretlab.ca>
26196 Date: Tue Jul 3 00:17:28 2007 -0600
26198 Fix Makefile to use $(MKCONFIG) macro for all board ports
26200 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26202 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
26203 Author: Grant Likely <grant.likely@secretlab.ca>
26204 Date: Tue Jul 3 00:17:28 2007 -0600
26206 Fix Makefile to use $(MKCONFIG) macro for all board ports
26208 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26210 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
26211 Author: Grant Likely <grant.likely@secretlab.ca>
26212 Date: Tue Jul 3 00:34:49 2007 -0600
26214 Correct fixup relocation for mpc83xx
26216 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26218 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
26219 Author: Grant Likely <grant.likely@secretlab.ca>
26220 Date: Tue Jul 3 00:34:44 2007 -0600
26222 Correct fixup relocation for mpc8260
26224 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26226 commit f3a52fe05923935db86985daf9438e2f70ac39aa
26227 Author: Grant Likely <grant.likely@secretlab.ca>
26228 Date: Tue Jul 3 00:34:39 2007 -0600
26230 Correct fixup relocation for mpc824x
26232 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26234 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
26235 Author: Grant Likely <grant.likely@secretlab.ca>
26236 Date: Tue Jul 3 00:34:34 2007 -0600
26238 Correct fixup relocation for mpc8220
26240 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26242 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
26243 Author: Grant Likely <grant.likely@secretlab.ca>
26244 Date: Tue Jul 3 00:34:29 2007 -0600
26246 Correct fixup relocation for MPC5xxx
26248 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26250 commit 3649cd99ba815b6601868735765602f00ef3692b
26251 Author: Grant Likely <grant.likely@secretlab.ca>
26252 Date: Tue Jul 3 00:34:24 2007 -0600
26254 Correct relocation fixup for mpc5xx
26256 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26258 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
26259 Author: Grant Likely <grant.likely@secretlab.ca>
26260 Date: Tue Jul 3 00:34:19 2007 -0600
26262 Don't set gd->reloc_off if relocation of .fixup works correctly
26264 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26266 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
26267 Author: Grant Likely <grant.likely@secretlab.ca>
26268 Date: Tue Jul 3 00:34:14 2007 -0600
26270 Remove obsolete mpc83xx linker scripts
26272 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26274 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
26275 Author: Grant Likely <grant.likely@secretlab.ca>
26276 Date: Tue Jul 3 00:34:09 2007 -0600
26278 Consolidate mpc8260 linker scripts
26280 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26282 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
26283 Author: Grant Likely <grant.likely@secretlab.ca>
26284 Date: Tue Jul 3 00:34:04 2007 -0600
26286 Remove obsolete mpc824x linker scripts
26288 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26290 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
26291 Author: Grant Likely <grant.likely@secretlab.ca>
26292 Date: Tue Jul 3 00:33:59 2007 -0600
26294 Remove obsolete mpc824x linker scripts (3 of 4)
26296 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26298 commit a71c084f3ac7fedf144537db2b2da47323068833
26299 Author: Grant Likely <grant.likely@secretlab.ca>
26300 Date: Tue Jul 3 00:33:53 2007 -0600
26302 Remove obsolete mpc824x linker scripts (2 of 4)
26304 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26306 commit f670a15468d1365241d40022b9408e1004181f5e
26307 Author: Grant Likely <grant.likely@secretlab.ca>
26308 Date: Tue Jul 3 00:33:48 2007 -0600
26310 Remove obsolete mpc824x linker scripts (1 of 4)
26312 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26314 commit 09555bd45a04c0e54f172528d21bc18896550d28
26315 Author: Grant Likely <grant.likely@secretlab.ca>
26316 Date: Tue Jul 3 00:33:43 2007 -0600
26318 Remove obsolete mpc8220 linker scripts
26320 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26322 commit 5efb992f046e51225c93d52f80fecbe433abd789
26323 Author: Grant Likely <grant.likely@secretlab.ca>
26324 Date: Tue Jul 3 00:33:38 2007 -0600
26326 Remove obsolete mpc5xxx linker scripts (3 of 3)
26328 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26330 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
26331 Author: Grant Likely <grant.likely@secretlab.ca>
26332 Date: Tue Jul 3 00:33:33 2007 -0600
26334 Remove obsolete mpc5xxx linker scripts (2 of 3)
26336 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26338 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
26339 Author: Grant Likely <grant.likely@secretlab.ca>
26340 Date: Tue Jul 3 00:33:28 2007 -0600
26342 Remove obsolete mpc5xxx linker scripts (1 of 3)
26344 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26346 commit b7d8e05f8675249b5f208aa73babeed384a4519d
26347 Author: Grant Likely <grant.likely@secretlab.ca>
26348 Date: Tue Jul 3 00:33:23 2007 -0600
26350 Remove obsolete mpc5xx linker scripts
26352 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26354 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
26355 Author: Grant Likely <grant.likely@secretlab.ca>
26356 Date: Tue Jul 3 00:33:18 2007 -0600
26358 Consolidate mpc83xx linker scripts
26360 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26362 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
26363 Author: Grant Likely <grant.likely@secretlab.ca>
26364 Date: Tue Jul 3 00:33:13 2007 -0600
26366 Consolidate mpc8260 linker scripts
26368 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26370 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
26371 Author: Grant Likely <grant.likely@secretlab.ca>
26372 Date: Tue Jul 3 00:33:08 2007 -0600
26374 Consolidate mpc824x linker scripts
26376 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26378 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
26379 Author: Grant Likely <grant.likely@secretlab.ca>
26380 Date: Tue Jul 3 00:33:03 2007 -0600
26382 Consolidate mpc8220 linker scripts
26384 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26386 commit d181c9a15cd41863fe24840d17848429f27d3c8c
26387 Author: Grant Likely <grant.likely@secretlab.ca>
26388 Date: Tue Jul 3 00:32:58 2007 -0600
26390 Consolidate mpc5xxx linker scripts
26392 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26394 commit 287ac924adb7291bebe5086652a362a30ab28b13
26395 Author: Grant Likely <grant.likely@secretlab.ca>
26396 Date: Tue Jul 3 00:32:53 2007 -0600
26398 Consolidate mpc5xx linker scripts
26400 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
26402 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
26403 Author: Wolfgang Denk <wd@denx.de>
26404 Date: Wed Jul 4 00:43:53 2007 +0200
26406 Fix a few file permission problems.
26408 Signed-off-by: Wolfgang Denk <wd@denx.de>
26410 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
26411 Author: Wolfgang Denk <wd@denx.de>
26412 Date: Wed Jul 4 00:38:38 2007 +0200
26414 Minor coding style cleanup. Rebuild CHANGELOG file.
26416 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
26417 Author: Jon Loeliger <jdl@jdl.com>
26418 Date: Mon Jun 11 19:03:44 2007 -0500
26420 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
26422 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26424 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
26425 Author: Jon Loeliger <jdl@jdl.com>
26426 Date: Mon Jun 11 19:03:39 2007 -0500
26428 README: Rewrite command line config to use CONFIG_CMD_* names.
26430 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26432 commit 72a074cec68e5bad60d63206c050974e08afd804
26433 Author: Jon Loeliger <jdl@jdl.com>
26434 Date: Mon Jun 11 19:03:34 2007 -0500
26436 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26438 This is a compatibility step that allows both the older form
26439 and the new form to co-exist for a while until the older can
26440 be removed entirely.
26442 All transformations are of the form:
26444 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26446 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26448 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26450 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
26451 Author: Jon Loeliger <jdl@jdl.com>
26452 Date: Mon Jun 11 19:03:28 2007 -0500
26454 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26456 This is a compatibility step that allows both the older form
26457 and the new form to co-exist for a while until the older can
26458 be removed entirely.
26460 All transformations are of the form:
26462 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26464 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26466 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26468 commit 9107ebe0d352420895ab69b715697bdebc8caf50
26469 Author: Jon Loeliger <jdl@jdl.com>
26470 Date: Mon Jun 11 19:03:23 2007 -0500
26472 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26474 This is a compatibility step that allows both the older form
26475 and the new form to co-exist for a while until the older can
26476 be removed entirely.
26478 All transformations are of the form:
26480 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26482 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26484 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26486 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
26487 Author: Jon Loeliger <jdl@jdl.com>
26488 Date: Mon Jun 11 19:03:19 2007 -0500
26490 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26492 This is a compatibility step that allows both the older form
26493 and the new form to co-exist for a while until the older can
26494 be removed entirely.
26496 All transformations are of the form:
26498 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26500 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26502 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26504 commit 737184114ec9c9e0ab94d6713536126073bd2472
26505 Author: Jon Loeliger <jdl@jdl.com>
26506 Date: Mon Jun 11 19:03:15 2007 -0500
26508 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26510 This is a compatibility step that allows both the older form
26511 and the new form to co-exist for a while until the older can
26512 be removed entirely.
26514 All transformations are of the form:
26516 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26518 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26520 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26522 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
26523 Author: Jon Loeliger <jdl@jdl.com>
26524 Date: Mon Jun 11 19:03:08 2007 -0500
26526 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26528 This is a compatibility step that allows both the older form
26529 and the new form to co-exist for a while until the older can
26530 be removed entirely.
26532 All transformations are of the form:
26534 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26536 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26538 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26540 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
26541 Author: Jon Loeliger <jdl@jdl.com>
26542 Date: Mon Jun 11 19:03:03 2007 -0500
26544 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26546 This is a compatibility step that allows both the older form
26547 and the new form to co-exist for a while until the older can
26548 be removed entirely.
26550 All transformations are of the form:
26552 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26554 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26556 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26558 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
26559 Author: Jon Loeliger <jdl@jdl.com>
26560 Date: Mon Jun 11 19:02:58 2007 -0500
26562 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26564 This is a compatibility step that allows both the older form
26565 and the new form to co-exist for a while until the older can
26566 be removed entirely.
26568 All transformations are of the form:
26570 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26572 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26574 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26576 commit 98b79003c21c2578206003256de4e781d6b36ca8
26577 Author: Jon Loeliger <jdl@jdl.com>
26578 Date: Mon Jun 11 19:02:53 2007 -0500
26580 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26582 This is a compatibility step that allows both the older form
26583 and the new form to co-exist for a while until the older can
26584 be removed entirely.
26586 All transformations are of the form:
26588 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26590 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26592 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26594 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
26595 Author: Jon Loeliger <jdl@jdl.com>
26596 Date: Mon Jun 11 19:02:49 2007 -0500
26598 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26600 This is a compatibility step that allows both the older form
26601 and the new form to co-exist for a while until the older can
26602 be removed entirely.
26604 All transformations are of the form:
26606 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26608 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26610 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26612 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
26613 Author: Jon Loeliger <jdl@jdl.com>
26614 Date: Mon Jun 11 19:02:34 2007 -0500
26616 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26618 This is a compatibility step that allows both the older form
26619 and the new form to co-exist for a while until the older can
26620 be removed entirely.
26622 All transformations are of the form:
26624 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26626 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26628 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26630 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
26631 Author: Jon Loeliger <jdl@jdl.com>
26632 Date: Mon Jun 11 19:02:20 2007 -0500
26634 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26636 This is a compatibility step that allows both the older form
26637 and the new form to co-exist for a while until the older can
26638 be removed entirely.
26640 All transformations are of the form:
26642 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26644 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26646 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26648 commit d5be43de93ff905c465e509d45a3164ef48d26e7
26649 Author: Jon Loeliger <jdl@jdl.com>
26650 Date: Mon Jun 11 19:02:10 2007 -0500
26652 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26654 This is a compatibility step that allows both the older form
26655 and the new form to co-exist for a while until the older can
26656 be removed entirely.
26658 All transformations are of the form:
26660 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26662 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26664 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26666 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
26667 Author: Jon Loeliger <jdl@jdl.com>
26668 Date: Mon Jun 11 19:02:05 2007 -0500
26670 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26672 This is a compatibility step that allows both the older form
26673 and the new form to co-exist for a while until the older can
26674 be removed entirely.
26676 All transformations are of the form:
26678 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26680 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26682 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26684 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
26685 Author: Jon Loeliger <jdl@jdl.com>
26686 Date: Mon Jun 11 19:01:54 2007 -0500
26688 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26690 This is a compatibility step that allows both the older form
26691 and the new form to co-exist for a while until the older can
26692 be removed entirely.
26694 All transformations are of the form:
26696 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26698 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26700 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26702 commit a76adc8142c1d956385a109e0b70f9319ede4d66
26703 Author: Jon Loeliger <jdl@jdl.com>
26704 Date: Mon Jun 11 19:01:43 2007 -0500
26706 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
26708 This is a compatibility step that allows both the older form
26709 and the new form to co-exist for a while until the older can
26710 be removed entirely.
26712 All transformations are of the form:
26714 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
26716 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
26718 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26720 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
26721 Author: Jon Loeliger <jdl@jdl.com>
26722 Date: Mon Jun 11 19:01:34 2007 -0500
26724 Introduce initial versions of new Command Config files.
26726 Derive three new files from cmd_confdefs.h:
26727 config_bootp.h - Has BOOTP related config options, not commands
26728 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
26729 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
26731 For now, include "config_bootp.h" for compatability until all
26732 users of it directly include it properly.
26734 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26736 commit 1f2a05898658900dc5717761e27abf2052e67e13
26737 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
26738 Date: Sat Jun 30 18:50:48 2007 +0200
26742 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
26744 commit a5d71e290f3673269be8eefb4ec44f53412f9461
26745 Author: Heiko Schocher <hs@pollux.denx.de>
26746 Date: Mon Jun 25 19:11:37 2007 +0200
26748 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
26750 Signed-off-by: Heiko Schocher <hs@denx.de>
26752 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
26753 Author: Niklaus Giger <niklaus.giger@nestal.com>
26754 Date: Mon Jun 25 17:03:13 2007 +0200
26756 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
26758 This patch prints the DDR status registers upon machine check
26759 interrupt on the 440EPx/GRx. This can be useful especially when
26760 ECC support is enabled.
26762 I added some small changes to the original patch from Niklaus to
26763 make it compile clean.
26765 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
26766 Signed-off-by: Stefan Roese <sr@denx.de>
26768 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
26769 Author: Niklaus Giger <niklaus.giger@nestal.com>
26770 Date: Mon Jun 25 16:50:55 2007 +0200
26772 ppc4xx: Fix O=buildir builds
26774 This patch fixes the problem to assemble cpu/ppc4xx/start.S
26775 experienced last week where building failed having specified
26776 O=../build.sequoia.
26778 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
26780 commit 466fff1a7bb5fe764a06450626f6098219f446b8
26781 Author: Stefan Roese <sr@denx.de>
26782 Date: Mon Jun 25 15:57:39 2007 +0200
26784 ppc4xx: Add pci_pre_init() for 405 boards
26786 This patch removes the CFG_PCI_PRE_INIT option completely, since
26787 it's not needed anymore with the patch from Matthias Fuchs with
26788 the "weak" pci_pre_init() implementation.
26790 Signed-off-by: Stefan Roese <sr@denx.de>
26792 commit 6f35c53166213c24a5a0e2390ed861136ff73870
26793 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26794 Date: Sun Jun 24 17:41:21 2007 +0200
26796 ppc4xx: Maintenance patch for esd's CPCI405 derivats
26798 -add pci_pre_init() for pci interrupt fixup code
26799 -disable phy sleep mode via reset_phy() function
26800 -use correct io accessors
26803 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26805 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
26806 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26807 Date: Sun Jun 24 17:23:41 2007 +0200
26809 ppc4xx: Add pci_pre_init() for 405 boards
26811 This patch adds support for calling a plattform dependant
26812 pci_pre_init() function for 405 boards. This can be used to
26813 move the current pci_405gp_fixup_irq() function into the
26816 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
26817 A default function with 'weak' attribute is used when
26818 a board specific pci_pre_init() is not implemented.
26820 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26822 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
26823 Author: Wolfgang Denk <wd@denx.de>
26824 Date: Fri Jun 22 23:59:00 2007 +0200
26826 Coding stylke cleanup; rebuild CHANGELOG
26828 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
26829 Author: Igor Lisitsin <igor@emcraft.com>
26830 Date: Wed Apr 18 14:55:19 2007 +0400
26832 Adapt log buffer code to support Linux 2.6
26834 A new environment variable, "logversion", selects the log buffer
26835 behaviour. If it is not set or set to a value other than 2, then the
26836 old, Linux 2.4.4, behaviour is selected.
26838 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
26841 commit a11e06965ec91270c51853407ff1261d3c740386
26842 Author: Igor Lisitsin <igor@emcraft.com>
26843 Date: Wed Mar 28 19:06:19 2007 +0400
26845 Extend POST support for PPC440
26847 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
26849 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
26852 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
26853 Author: Heiko Schocher <hs@pollux.denx.de>
26854 Date: Fri Jun 22 19:11:54 2007 +0200
26856 [PCS440EP] upgrade the PCS440EP board:
26857 - Show on the Status LEDs, some States of the board.
26858 - Get the MAC addresses from the EEProm
26860 - use the CF on the board.
26861 - check the U-Boot image in the Flash with a SHA1
26863 - use dynamic TLB entries generation for the SDRAM
26865 Signed-off-by: Heiko Schocher <hs@denx.de>
26867 commit 3a1f5c81b0b9557817a789bece839905581c2205
26868 Author: Stefan Roese <sr@denx.de>
26869 Date: Fri Jun 22 16:58:40 2007 +0200
26871 ppc4xx: Fix problem with extended program_tlb() funtion
26873 The recently extended program_tlb() function had a problem when
26874 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
26875 virtual address was not incremented. This patch fixes this issue
26876 and is tested on Katmai with 512MB SDRAM.
26878 Signed-off-by: Stefan Roese <sr@denx.de>
26880 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
26881 Author: Rafal Jaworowski <raj@semihalf.com>
26882 Date: Fri Jun 22 14:58:04 2007 +0200
26884 [ppc] Fix build breakage for all non-4xx PowerPC variants.
26886 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
26887 - minor 4xx cleanup
26889 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
26890 Author: Mike Frysinger <vapier@gentoo.org>
26891 Date: Fri Jun 22 10:34:12 2007 +0200
26893 [patch] add nand_init() prototype to nand.h
26895 since nand_init() is expected to be called by other parts of u-boot, there
26896 should be a prototype for it in nand.h
26898 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
26899 Signed-off-by: Stefan Roese <sr@denx.de>
26901 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
26902 Author: Wolfgang Denk <wd@denx.de>
26903 Date: Wed Jun 20 18:14:24 2007 +0200
26905 Coding style cleanup. Refresh CHANGELOG.
26907 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
26908 Author: Stefan Roese <sr@denx.de>
26909 Date: Tue Jun 19 17:22:44 2007 +0200
26911 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
26913 This patch adds a board command to configure the I2C bootstrap EEPROM
26914 values. Right now 533 and 667MHz are supported for booting either via NOR
26915 or NAND FLASH. Here the usage:
26917 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
26918 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
26920 Signed-off-by: Stefan Roese <sr@denx.de>
26922 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
26923 Author: Stefan Roese <sr@denx.de>
26924 Date: Tue Jun 19 16:42:31 2007 +0200
26926 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
26928 The latest changes showed a problem with the location of the NAND-SPL
26929 image in the OCM and the init-data area (incl. cache). This patch
26930 fixes this problem.
26932 Signed-off-by: Stefan Roese <sr@denx.de>
26934 commit 86ba99e34194394052d24c04dc40d1263d29a26f
26935 Author: Stefan Roese <sr@denx.de>
26936 Date: Tue Jun 19 16:40:58 2007 +0200
26938 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
26940 Signed-off-by: Stefan Roese <sr@denx.de>
26942 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
26943 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
26944 Date: Mon Jun 18 13:50:13 2007 -0500
26946 Added M5329AFEE and M5329BFEE Platforms
26948 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
26949 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
26950 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
26953 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
26954 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
26955 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
26956 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
26957 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
26958 lib_m68k/time.c, net/eth.c and rtc/Makefile
26960 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
26962 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
26963 Author: Michal Simek <monstr@monstr.eu>
26964 Date: Sun Jun 17 19:04:11 2007 +0200
26966 [fix] email reparation
26968 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
26969 Author: Michal Simek <monstr@monstr.eu>
26970 Date: Sun Jun 17 19:03:21 2007 +0200
26972 [FIX] fix microblaze file permitission
26974 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
26975 Author: Stefan Roese <sr@denx.de>
26976 Date: Fri Jun 15 11:33:41 2007 +0200
26978 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
26980 Now CONFIG_440 has to be defined in all PPC440 board config files.
26982 Signed-off-by: Stefan Roese <sr@denx.de>
26984 commit efa35cf12d914d4caba942acd5a6c45f217de302
26985 Author: Grzegorz Bernacki <gjb@semihalf.com>
26986 Date: Fri Jun 15 11:19:28 2007 +0200
26988 ppc4xx: Clean up 440 exceptions handling
26990 - Introduced dedicated switches for building 440 and 405 images required
26991 for 440-specific machine instructions like 'rfmci' etc.
26993 - Exception vectors moved to the proper location (_start moved away from
26994 the critical exception handler space, which it occupied)
26996 - CriticalInput now serviced (with default handler)
26998 - MachineCheck properly serviced (added a dedicated handler and return
27001 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
27002 unhandled and those not relevant for 4xx were eliminated)
27004 - Eliminated Linux leftovers, removed dead code
27006 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
27007 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
27008 Signed-off-by: Stefan Roese <sr@denx.de>
27010 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
27011 Author: Stefan Roese <sr@denx.de>
27012 Date: Fri Jun 15 08:18:01 2007 +0200
27014 [ppc4xx] Add initial lwmon5 board support
27016 This patch adds initial support for the Liebherr lwmon5 board euqipped
27017 with an AMCC 440EPx PowerPC.
27019 Signed-off-by: Stefan Roese <sr@denx.de>
27021 commit 85f737376d5ff3d5f0d45a8b657686326d175307
27022 Author: Stefan Roese <sr@denx.de>
27023 Date: Fri Jun 15 07:39:43 2007 +0200
27025 [ppc4xx] Extend 44x GPIO setup with default output state
27027 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
27028 is extended with the default GPIO output state (level).
27030 Signed-off-by: Stefan Roese <sr@denx.de>
27032 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
27033 Author: Stefan Roese <sr@denx.de>
27034 Date: Thu Jun 14 11:14:32 2007 +0200
27036 [ppc4xx] Extend program_tlb() with virtual & physical addresses
27038 Now program_tlb() allows to program a TLB (or multiple) with
27039 different virtual and physical addresses. With this change, now one
27040 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
27041 diabled and once with caches enabled.
27043 Signed-off-by: Stefan Roese <sr@denx.de>
27045 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
27046 Author: Detlev Zundel <dzu@denx.de>
27047 Date: Wed May 23 19:02:41 2007 +0200
27049 Change 'repeatable' attribute of some commands to sensible values.
27051 Most prominently this changes 'erase' to be non-repeatable.
27053 Signed-off-by: Detlev Zundel <dzu@denx.de>
27055 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
27056 Author: Detlev Zundel <dzu@denx.de>
27057 Date: Wed May 23 18:47:48 2007 +0200
27059 Fix 'run' not to continue after interrupted command
27061 Signed-off-by: Detlev Zundel <dzu@denx.de>
27063 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
27064 Author: Jason Jin <Jason.jin@freescale.com>
27065 Date: Mon Jun 11 15:14:24 2007 +0200
27067 USB: This patch fix readl in ohci swap reg access.
27069 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
27071 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
27072 Author: Bartlomiej Sieka <tur@semihalf.com>
27073 Date: Fri Jun 8 14:52:22 2007 +0200
27075 TQM5200: Add Flat Device Tree support, update default env. accordingly.
27077 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
27078 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27080 commit 9045f33c023f698660a2e45d1b2194c0711abebc
27081 Author: Wolfgang Denk <wd@denx.de>
27082 Date: Fri Jun 8 10:24:58 2007 +0200
27084 Fix config problems on SC3 board; make ide_reset_timeout work.
27086 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
27087 Author: Benoît Monin <bmonin@adeneo.eu>
27088 Date: Fri Jun 8 09:55:24 2007 +0200
27090 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
27092 Set the correct value in GPIOx_TCR when configuring the gpio
27093 with CFG_440_GPIO_TABLE.
27095 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
27096 Signed-off-by: Stefan Roese <sr@denx.de>
27098 commit f539edc076cfe52bff919dd512ba8d7af0e22092
27099 Author: Vadim Bendebury <vbendeb@google.com>
27100 Date: Thu May 24 15:52:25 2007 -0700
27102 cosmetic changes to bcm570x driver
27104 This is a cosmetic only changes submission.
27105 It affects files relevant to bcm570x driver.
27106 the commands used to generate this change was
27109 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
27111 The BMW target (the only one using this chip so far) builds cleanly, the
27112 `before and after' generated object files for drivers/bcm570x.c and
27113 drivers/tigon3.o are identical as reported by objdump -d
27115 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
27116 Signed-off-by: Ben Warren <bwarren@qstreams.com>
27118 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
27119 Author: Wolfgang Denk <wd@denx.de>
27120 Date: Wed Jun 6 16:26:56 2007 +0200
27122 Coding Style cleanup; generate new CHANGELOG file.
27124 Signed-off-by: Wolfgang Denk <wd@denx.de>
27126 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
27127 Author: Markus Klotzbuecher <mk@denx.de>
27128 Date: Wed Jun 6 11:49:44 2007 +0200
27130 TRAB, USB: update trab board configuration for use of generic ohci driver
27132 commit dace45acd1c1357daa9322099d07c9a9e08b0024
27133 Author: Markus Klotzbuecher <mk@denx.de>
27134 Date: Wed Jun 6 11:49:43 2007 +0200
27136 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
27138 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
27139 Author: Markus Klotzbuecher <mk@denx.de>
27140 Date: Wed Jun 6 11:49:43 2007 +0200
27142 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
27144 commit fc43be478f2aa37ce38acd85355038866e4162af
27145 Author: Markus Klotzbuecher <mk@denx.de>
27146 Date: Wed Jun 6 11:49:35 2007 +0200
27148 USB/OHCI: endianness cleanup in the generic ohci driver
27150 commit c440bfe6d6d92d66478a7e84402b31f48413617b
27151 Author: Stefan Roese <sr@denx.de>
27152 Date: Wed Jun 6 11:42:13 2007 +0200
27154 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
27156 This patch adds NAND booting support for the AMCC Acadia eval board.
27158 Please make sure to configure jumper J7 to position 2-3 when booting
27159 from NOR, and to position 1-2 when booting for NAND.
27161 I also added a board command to configure the I2C bootstrap EEPROM
27162 values. Right now only 267MHz is support for booting either via NOR
27163 or NAND FLASH. Here the usage:
27165 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
27166 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
27168 Signed-off-by: Stefan Roese <sr@denx.de>
27170 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
27171 Author: Rodolfo Giometti <giometti@linux.it>
27172 Date: Wed Jun 6 10:08:14 2007 +0200
27174 Files include/linux/byteorder/{big,little}_endian.h define
27175 __BIG_ENDIAN and __LITTLE_ENDIAN.
27177 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
27179 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
27180 Author: Zhang Wei <wei.zhang@freescale.com>
27181 Date: Wed Jun 6 10:08:14 2007 +0200
27183 Add USB PCI-OHCI, USB keyboard and event poll support to the
27184 MPC8641HPCN board config file.
27186 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
27188 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
27189 Author: Zhang Wei <wei.zhang@freescale.com>
27190 Date: Wed Jun 6 10:08:14 2007 +0200
27192 USB PCI-OHCI, interrupt pipe and usb event poll support
27194 This patch added USB PCI-OHCI chips support, interrupt pipe support
27195 and usb event poll support. For supporting the USB interrupt pipe, the
27196 globe urb_priv is moved to purb in ed struct. Now, we can process
27197 several urbs at one time. The interrupt pipe support codes are ported
27198 from Linux kernel 2.4.
27200 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
27202 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
27203 Author: Zhang Wei <wei.zhang@freescale.com>
27204 Date: Wed Jun 6 10:08:13 2007 +0200
27206 USB event poll support
27208 This patch adds USB event poll support, which could be used in usbkbd
27209 and other usb devices driver when the asynchronous interrupt
27210 processing is supported.
27212 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
27214 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
27215 Author: Rodolfo Giometti <giometti@linux.it>
27216 Date: Wed Jun 6 10:08:12 2007 +0200
27218 ISP116x: delay for crappy USB keys
27220 Using some (very) slow USB keys cause the USB host controller buffers
27221 are not ready to be read by the CPU so we need an extra delay before
27222 reading the USB storage data.
27224 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
27226 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
27227 Author: Markus Klotzbuecher <mk@denx.de>
27228 Date: Wed Jun 6 10:08:12 2007 +0200
27230 Change duplicate usb_cpu_init_fail to usb_board_init_fail
27232 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
27235 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
27237 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
27238 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
27239 Date: Tue Jun 5 12:30:52 2007 -0500
27241 mpc8641 image size cleanup
27243 e600 does not have a bootpg restriction.
27244 Move the version string to beginning of image at fff00000.
27245 Resetvec.S is not needed.
27246 Update flash copy instructions.
27247 Add tftpflash env variable
27249 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
27250 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27252 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
27253 Author: Benoît Monin <bmonin@adeneo.eu>
27254 Date: Mon Jun 4 08:36:05 2007 +0200
27256 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
27258 The attached patch is mainly cosmetic, allowing u-boot to
27259 display the correct bootstrap option letter according to the
27262 The original patch was extended with 405EZ support by Stefan
27265 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
27266 Signed-off-by: Stefan Roese <sr@denx.de>
27268 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
27269 Author: Nikita V. Youshchenko <yoush@debian.org>
27270 Date: Wed May 23 12:45:19 2007 +0400
27272 fix compilation problem for mpc8349itx CFG_RAMBOOT
27274 Current include/configs/MPC8349ITX.h does contain some support for building
27275 image that will be started from memory (without putting in into flash).
27276 It could be triggered by building with TEXT_BASE set to a low value.
27278 However, this support is incomplete: using of low TEXT_BASE causes
27279 defining configuration macros in inconsistent way, which later leads
27280 to compilation errors. In particular. flash support is being disabled,
27281 but then flash structures get referenced.
27283 This patch fixes this, making it possible to build with low TEXT_BASE.
27285 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
27287 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27289 commit 8a364f0970de49949d635e60accf463c6443ef8c
27290 Author: Nikita V. Youshchenko <yoush@debian.org>
27291 Date: Wed May 23 12:45:25 2007 +0400
27293 add missing 'console' var to default mpc8349itx config
27295 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27297 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
27298 Author: Stefan Roese <sr@denx.de>
27299 Date: Fri Jun 1 16:18:17 2007 +0200
27301 ppc4xx: Add missing file for Bamboo NAND booting support
27303 Signed-off-by: Stefan Roese <sr@denx.de>
27305 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
27306 Author: Stefan Roese <sr@denx.de>
27307 Date: Fri Jun 1 15:58:19 2007 +0200
27309 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
27311 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
27312 suggested by AMCC it is not recommended to dynamically change the EBC
27313 speed after bootup. So we undo this change to be on the safe side.
27315 Signed-off-by: Stefan Roese <sr@denx.de>
27317 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
27318 Author: Stefan Roese <sr@denx.de>
27319 Date: Fri Jun 1 15:29:04 2007 +0200
27321 ppc4xx: Update Sequoia NAND booting support with ECC
27323 Signed-off-by: Stefan Roese <sr@denx.de>
27325 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
27326 Author: Stefan Roese <sr@denx.de>
27327 Date: Fri Jun 1 15:27:11 2007 +0200
27329 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
27331 This patch adds NAND booting support for the AMCC Bamboo eval board.
27332 Since the NAND-SPL boot image is limited to 4kbytes, this version
27333 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
27334 supported, since the setup code for I2C DIMM autodetection and
27335 configuration is too big for this NAND bootloader.
27337 Signed-off-by: Stefan Roese <sr@denx.de>
27339 commit 42be56f53c8b107868e6125c8524ae84293e95a7
27340 Author: Stefan Roese <sr@denx.de>
27341 Date: Fri Jun 1 15:23:04 2007 +0200
27343 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
27345 The U-Boot NAND booting support is now extended to support ECC
27346 upon loading of the NAND U-Boot image.
27348 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
27350 Signed-off-by: Stefan Roese <sr@denx.de>
27352 commit a471db07fbb65a841ffc9f4f112562b945230f98
27353 Author: Stefan Roese <sr@denx.de>
27354 Date: Fri Jun 1 15:19:29 2007 +0200
27356 ppc4xx: Prepare Bamboo port for NAND booting support
27358 This patch updates the "normal" Bamboo NOR booting port, so
27359 that it is compatible with the coming soon NAND booting
27362 It also enables the 2nd NAND flash on the Bamboo.
27364 Signed-off-by: Stefan Roese <sr@denx.de>
27366 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
27367 Author: Stefan Roese <sr@denx.de>
27368 Date: Fri Jun 1 15:16:58 2007 +0200
27370 ppc4xx: Update in_be32() functions and friends to latest Linux version
27372 Signed-off-by: Stefan Roese <sr@denx.de>
27374 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
27375 Author: Stefan Roese <sr@denx.de>
27376 Date: Fri Jun 1 15:15:12 2007 +0200
27378 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
27380 This patch adds hardware ECC support to the NDFC driver. It also
27381 changes the register access from using the "simple" in32/out32
27382 functions to the in_be32/out_be32 functions, which make sure
27383 that the access is correctly synced. This is the only recommended
27384 access to SoC registers in the current Linux kernel.
27386 Signed-off-by: Stefan Roese <sr@denx.de>
27388 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
27389 Author: Stefan Roese <sr@denx.de>
27390 Date: Fri Jun 1 15:12:15 2007 +0200
27392 NAND: Update nand_ecc.c to latest Linux version
27394 This patch updates the nand_ecc code to the latest Linux version.
27395 The main reason for this is the more compact code. This makes
27396 it possible to include the ECC code into the NAND bootloader
27397 image (NAND_SPL) for PPC4xx.
27399 Signed-off-by: Stefan Roese <sr@denx.de>
27401 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
27402 Author: Stefan Roese <sr@denx.de>
27403 Date: Fri Jun 1 15:09:50 2007 +0200
27405 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
27407 Signed-off-by: Stefan Roese <sr@denx.de>
27409 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
27410 Author: Stefan Roese <sr@denx.de>
27411 Date: Fri Jun 1 13:45:24 2007 +0200
27413 ppc4xx: Change Luan config file to support ECC
27415 With the updated 44x DDR2 driver the Luan board now supports
27416 ECC generation and checking.
27418 Signed-off-by: Stefan Roese <sr@denx.de>
27420 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
27421 Author: Stefan Roese <sr@denx.de>
27422 Date: Fri Jun 1 13:45:00 2007 +0200
27424 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
27426 Add config option for 180 degree advance clock control as needed
27427 for the AMCC Luan eval board.
27429 Signed-off-by: Stefan Roese <sr@denx.de>
27431 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
27432 Author: Wolfgang Denk <wd@denx.de>
27433 Date: Thu May 31 17:20:09 2007 +0200
27435 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
27437 Signed-off-by: Wolfgang Denk <wd@denx.de>
27439 commit 7049288fb1f16f1b317140226cdebd07bd416395
27440 Author: Bartlomiej Sieka <tur@semihalf.com>
27441 Date: Sun May 27 17:26:46 2007 +0200
27443 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
27445 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
27447 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
27448 Author: Bartlomiej Sieka <tur@semihalf.com>
27449 Date: Sun May 27 17:06:36 2007 +0200
27451 Motion-PRO: Add support for redundant environment.
27453 Enable redundant environment, add a MTD partition for it; also add env.
27454 variable command for passing MTD partitions to the kernel command line.
27456 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
27457 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27459 commit a26eabeec31746f06d309103690892805696e344
27460 Author: Bartlomiej Sieka <tur@semihalf.com>
27461 Date: Sun May 27 17:05:11 2007 +0200
27463 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
27465 Allow passing longer command line to the kernel - useful especially
27466 for passing MTD partition layout.
27468 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
27469 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27471 commit 9160b96f71483a116de81c68985e8ee306d36764
27472 Author: Bartlomiej Sieka <tur@semihalf.com>
27473 Date: Sun May 27 17:04:18 2007 +0200
27475 Fix: Add missing NULL termination in strings expanded by macros parser.
27477 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
27478 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27480 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
27481 Author: Bartlomiej Sieka <tur@semihalf.com>
27482 Date: Sun May 27 17:03:37 2007 +0200
27484 Motion-PRO: Update EEPROM's page write bits and write delay.
27486 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
27487 have a page write capability of two bytes", and "This device offers fast (1ms)
27488 byte write". Add 3ms of extra delay.
27490 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
27491 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27493 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
27494 Author: Bartlomiej Sieka <tur@semihalf.com>
27495 Date: Sun May 27 16:58:45 2007 +0200
27497 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
27499 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
27500 networking does not function. This commit switches PHY to TX mode by clearing
27501 the FX_SEL bit of Mode Control Register. It also reverses commit
27502 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
27504 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
27505 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27507 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
27508 Author: Bartlomiej Sieka <tur@semihalf.com>
27509 Date: Sun May 27 16:57:15 2007 +0200
27511 Motion-PRO: Add support for the temperature sensor.
27513 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
27514 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27516 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
27517 Author: Bartlomiej Sieka <tur@semihalf.com>
27518 Date: Sun May 27 16:55:23 2007 +0200
27520 Motion-PRO: Add displaying of CPLD revision information during boot.
27522 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
27523 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27525 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
27526 Author: Bartlomiej Sieka <tur@semihalf.com>
27527 Date: Sun May 27 16:53:43 2007 +0200
27529 MPC5xxx: Change names of defines related to IPB and PCI clocks.
27531 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
27532 them does not cause PCI or IPB clocks to run at the specified speed.
27533 Instead, they configure divisors used to calculate said clocks. This
27534 patch renames the defines according to their real function.
27536 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
27537 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27539 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
27540 Author: Bartlomiej Sieka <tur@semihalf.com>
27541 Date: Sun May 27 16:51:48 2007 +0200
27543 Motion-PRO: Add LED support.
27545 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
27546 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27547 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
27549 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
27550 Author: Ulf Samuelsson <ulf@atmel.com>
27551 Date: Thu May 24 12:12:47 2007 +0200
27553 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
27555 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
27556 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
27557 Signed-off-by: Stefan Roese <sr@denx.de>
27559 commit d756894722c888d09a9fa1df8323753772d3dcce
27560 Author: Stefan Roese <sr@denx.de>
27561 Date: Thu May 24 09:49:00 2007 +0200
27563 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
27565 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
27566 fixes a small bug in the 405EZ OCM initialization. Thanks for
27569 Signed-off-by: Stefan Roese <sr@denx.de>
27571 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
27572 Author: Stefan Roese <sr@denx.de>
27573 Date: Thu May 24 08:22:09 2007 +0200
27575 ppc4xx: Update AMCC Acadia support for board revision 1.1
27577 This patch updates the Acadia (405EZ) support for the new 1.1 board
27578 revision. It also adds support for NAND FLASH via the 4xx NDFC.
27580 Please note that the jumper J7 must be in position 2-3 for this
27581 NAND support. Position 1-2 is for NAND booting only. NAND booting
27582 support will follow later.
27584 Signed-off-by: Stefan Roese <sr@denx.de>
27586 commit 822d55365bb557e084d0e33625a6dedcc866110b
27587 Author: Jon Loeliger <jdl@freescale.com>
27588 Date: Wed May 23 14:09:46 2007 -0500
27590 Add LIST_86xx MAKEALL target for PowerPC builds.
27592 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27594 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
27595 Author: Stefan Roese <sr@denx.de>
27596 Date: Tue May 22 12:48:09 2007 +0200
27598 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
27600 Signed-off-by: Stefan Roese <sr@denx.de>
27602 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
27603 Author: Stefan Roese <sr@denx.de>
27604 Date: Tue May 22 12:46:10 2007 +0200
27606 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
27608 This patch adds support for 405 PPC's to the 4xx NAND driver
27609 ndfc.c. This is in preparation for the new AMCC 405EZ.
27611 Signed-off-by: Stefan Roese <sr@denx.de>
27613 commit 10603d76767426be803dadd4fb688b97eb69481c
27614 Author: Stefan Roese <sr@denx.de>
27615 Date: Mon May 21 07:41:22 2007 +0200
27617 ppc4xx: Fix problem in 405EZ OCM initialization
27619 As spotted by Bruce Adler this patch fixes an initialization problem
27622 Signed-off-by: Stefan Roese <sr@denx.de>
27624 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
27625 Author: Peter Pearse <peter.pearse@arm.com>
27626 Date: Fri May 18 16:47:03 2007 +0100
27628 Reduce line lengths to 80 characters max.
27630 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
27631 Author: Peter Pearse <peter.pearse@arm.com>
27632 Date: Fri May 18 14:34:07 2007 +0100
27634 Makefile permissions
27636 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
27637 Author: Peter Pearse <peter.pearse@arm.com>
27638 Date: Fri May 18 14:33:11 2007 +0100
27640 Makefile permissions
27642 commit 255a3577c848706441daee0174543efe205a77f8
27643 Author: Kim Phillips <kim.phillips@freescale.com>
27644 Date: Wed May 16 16:52:19 2007 -0500
27646 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
27648 For all practical u-boot purposes, TSECs don't differ throughout the
27649 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
27651 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
27653 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
27654 Author: Stefano Babic <sbabic@denx.de>
27655 Date: Wed May 16 14:49:12 2007 +0200
27657 Fix compile problem cause my Microblaze merge
27659 Signed-off-by: Stefano Babic <sbabic@denx.de>
27661 commit ada4697d0230d6da552867777f98a67ec3ba2579
27662 Author: Jeffrey Mann <mannj@embeddedplanet.com>
27663 Date: Wed May 16 13:23:10 2007 +0200
27665 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
27667 Because the Sequoia board does not boot with an EBC faster than 66MHz,
27668 the clock divider are changed after the initial boot process.
27670 This allows for maximum clocking speeds to be achieved on newer boards.
27671 Sequoia boards with 666.66 MHz processors require that the EBC divider
27672 be set to 3 in order to start the initial boot process at a slower EBC
27673 speed. After the initial boot process, the divider can be set back to 2,
27674 which will cause the boards to run at 83.333MHz. This is backward
27675 compatible with boards with 533.33 MHz processors, as these boards will
27676 already be set with an EBC divider of 2.
27678 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
27680 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
27681 Author: Wolfgang Denk <wd@denx.de>
27682 Date: Wed May 16 01:16:53 2007 +0200
27684 Minor Coding Style cleanup, update CHANGELOG.
27686 Signed-off-by: Wolfgang Denk <wd@denx.de>
27688 commit d62f64cc23a940eafe712c776b3249e4160753d1
27689 Author: Wolfgang Denk <wd@denx.de>
27690 Date: Wed May 16 00:13:33 2007 +0200
27692 Coding Style Cleanup, new CHANGELOG
27694 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
27695 Author: Wolfgang Denk <wd@denx.de>
27696 Date: Tue May 15 23:38:05 2007 +0200
27698 Minor coding style cleanup.
27700 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
27701 Author: mushtaq khan <mushtaq_k@procsys.com>
27702 Date: Fri Apr 20 14:23:02 2007 +0530
27704 Add driver for S-ATA-controller on Intel processors with South
27705 Bridge, ICH-5, ICH-6 and ICH-7.
27709 1. Code is divided in to two files. All functions, which are
27710 controller specific are kept in "drivers/ata_piix.c" file and
27711 functions, which are not controller specific, are kept in
27712 "common/cmd_sata.c" file.
27714 2. Reading and Writing from the S-ATA drive is done using PIO method.
27716 3. Driver can be configured for 48-bit addressing by defining macro
27717 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
27720 4. S-ATA read function is hooked to the File system, commands like
27721 ext2ls and ext2load file can be used. This has been tested.
27723 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
27724 controller and identifies the S-ATA drives connected to it.
27726 6. U-Boot command "sata" is added, which is used to read/write, print
27727 partition table and get info about the drives present. This I have
27728 implemented in same way as "ide" command is implemented in U-Boot.
27730 7. This driver is for S-ATA in native mode.
27732 8. This driver does not support the Native command queuing and
27735 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
27737 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
27738 Author: mushtaq khan <mushtaq_k@procsys.com>
27739 Date: Mon Apr 30 15:57:22 2007 +0530
27741 Fixes bug clearing the bss section for i386
27744 There is a bug in the code of clearing the bss section for processor
27745 i386.(File: cpu/i386/start.S)
27746 In the code, bss_start addr (starting addr of bss section) is put into
27747 the register %eax, but the code which clears the bss section refers to
27748 the addr pointed by %edi.
27750 This patch fixes this bug by putting bss_start into %edi register.
27752 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
27754 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
27755 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
27756 Date: Mon Apr 30 16:47:28 2007 -0500
27758 Add support for BCM5464 Quad Phy
27760 Added support for Broadcom's BCM5464 Quad Phy
27762 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
27764 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
27765 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
27766 Date: Wed May 9 08:10:57 2007 +0800
27768 Search the exception table with linear algorithm
27770 Search the exception table with linear algorithm instead of
27771 bisecting algorithm.
27772 Because the exception table might be unsorted.
27774 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
27776 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
27777 Author: Aubrey.Li <aubrey.adi@gmail.com>
27778 Date: Mon May 14 11:47:35 2007 +0800
27780 Fix compilation issues on MACOSX
27782 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
27783 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
27785 commit 56fd7162985c412317bbf763a225fba23c64fd31
27786 Author: Stephen Williams <steve@icarus.com>
27787 Date: Tue May 15 07:55:42 2007 -0700
27789 Fix for compile of JSE target
27791 The attached patch fixes the compile of the JSE board in the
27792 denx git as of 14 may 2007. It is an extremely simple patch,
27793 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
27795 Fix to compile JSE against 20070514 git of u-boot
27797 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
27798 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
27799 Date: Sun May 13 21:01:03 2007 +0900
27801 sh: MS7750SE support.
27803 This adds support for the Hitachi MS7750SE.
27805 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27807 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
27808 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
27809 Date: Sun May 13 20:58:00 2007 +0900
27811 sh: First support code of SuperH.
27813 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27815 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
27816 Author: Stefan Roese <sr@denx.de>
27817 Date: Fri May 11 12:01:49 2007 +0200
27819 ppc4xx: Add mtcpr/mfcpr access macros
27821 Signed-off-by: Stefan Roese <sr@denx.de>
27823 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
27824 Author: Stefan Roese <sr@denx.de>
27825 Date: Fri May 11 12:01:06 2007 +0200
27827 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
27829 Signed-off-by: Stefan Roese <sr@denx.de>
27831 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
27832 Author: Piotr Kruszynski <ppk@semihalf.com>
27833 Date: Thu May 10 16:55:52 2007 +0200
27835 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
27838 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
27839 Author: Peter Pearse <peter.pearse@arm.com>
27840 Date: Wed May 9 11:42:44 2007 +0100
27842 Add the board directory for SMN42
27844 commit 160131bf965785419626df6c388729fe0b597992
27845 Author: Peter Pearse <peter.pearse@arm.com>
27846 Date: Wed May 9 11:41:58 2007 +0100
27848 Add the files for the SMN42 board
27850 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
27851 Author: Peter Pearse <peter.pearse@arm.com>
27852 Date: Wed May 9 11:40:34 2007 +0100
27854 Remove the deleted files for the SMN42 patch
27856 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
27857 Author: Peter Pearse <peter.pearse@arm.com>
27858 Date: Wed May 9 11:37:56 2007 +0100
27860 New board SMN42 branch
27862 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
27863 Author: Peter Pearse <peter.pearse@arm.com>
27864 Date: Wed May 9 10:24:38 2007 +0100
27866 Makefile permissions
27868 commit b84289b595731e8851df46e893845cc1322c9b9b
27869 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
27870 Date: Tue May 8 14:17:07 2007 -0500
27872 8641hpcn: Fix Makefile after moving pixis to board/freescale.
27874 The OBJTREE != SRCTREE build scenario was broken.
27877 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
27878 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27880 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
27881 Author: Michal Simek <monstr@monstr.eu>
27882 Date: Tue May 8 15:57:43 2007 +0200
27884 add: reading special purpose registers
27886 commit 1a50f164beb065f360fbddb76029607d6b099698
27887 Author: Michal Simek <monstr@monstr.eu>
27888 Date: Tue May 8 14:52:52 2007 +0200
27890 add: Microblaze V5 exception handling
27892 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
27893 Author: Michal Simek <monstr@monstr.eu>
27894 Date: Tue May 8 14:39:11 2007 +0200
27896 add: FSL control read and write
27898 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
27899 Author: Piotr Kruszynski <ppk@semihalf.com>
27900 Date: Tue May 8 13:05:44 2007 +0200
27902 [Motion-PRO] Add support for I2C, EEPROM and RTC.
27904 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
27905 Author: Bartlomiej Sieka <tur@semihalf.com>
27906 Date: Tue May 8 10:23:56 2007 +0200
27908 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
27911 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
27912 Author: Bartlomiej Sieka <tur@semihalf.com>
27913 Date: Tue May 8 09:39:12 2007 +0200
27915 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
27916 eliminates networking problems in Linux (timeouts).
27918 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
27919 Author: Bartlomiej Sieka <tur@semihalf.com>
27920 Date: Tue May 8 09:21:57 2007 +0200
27922 [Motion-PRO] Enable Flat Device Tree support and modify default environment
27923 to allow booting of FDT-expecting kernels.
27925 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
27926 Author: Michal Simek <monstr@monstr.eu>
27927 Date: Mon May 7 23:58:31 2007 +0200
27929 new: USE_MSR_INTR support
27931 commit 008861a2f3ef2c062744d733787c7e530a1b8761
27932 Author: Bartlomiej Sieka <tur@semihalf.com>
27933 Date: Mon May 7 22:36:15 2007 +0200
27935 [MPC5xxx] There are networking problems on the Motion-PRO board with
27936 current PHY initalization code (tftp timeouts all the time). This commit
27937 temporarily disables PHY initalization sequence to make the networking
27938 operational, until a fix is found.
27940 commit abca901869c3760b6c5fecb825db6c1d91a78a93
27941 Author: Wolfgang Denk <wd@denx.de>
27942 Date: Mon May 7 22:10:36 2007 +0200
27944 Get rid of duplicated file (see include/configs/sbc8560.h instead)
27946 Signed-off-by: Wolfgang Denk <wd@denx.de>
27948 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
27949 Author: Wolfgang Denk <wd@denx.de>
27950 Date: Mon May 7 22:07:08 2007 +0200
27952 Get rid of duplicated file (see doc/README.SBC8560 instead)
27954 Signed-off-by: Wolfgang Denk <wd@denx.de>
27956 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
27957 Author: Michal Simek <monstr@monstr.eu>
27958 Date: Mon May 7 19:43:10 2007 +0200
27960 fix: read and write MSR - repair number of parameters
27962 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
27963 Author: Jeffrey Mann <mannj@embeddedplanet.com>
27964 Date: Mon May 7 19:42:49 2007 +0200
27966 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
27968 A '3' got cut off in the formatting of the last patch to automatically
27969 change the clock speed of the system clock on sequoia board.
27971 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
27972 Signed-off-by: Stefan Roese <sr@denx.de>
27974 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
27975 Author: Michal Simek <monstr@monstr.eu>
27976 Date: Mon May 7 19:33:51 2007 +0200
27978 new: fsl interrupt support
27979 FSL_Has_data is connected to INTC.
27981 commit 792032baa7d625e34c981ab6df521911bd8dc861
27982 Author: Michal Simek <monstr@monstr.eu>
27983 Date: Mon May 7 19:30:12 2007 +0200
27985 fix: interrupt handler
27988 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
27989 Author: Michal Simek <monstr@monstr.eu>
27990 Date: Mon May 7 19:25:08 2007 +0200
27992 fix: remove asm code
27994 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
27995 Author: Michal Simek <monstr@monstr.eu>
27996 Date: Mon May 7 19:12:43 2007 +0200
27998 fix: clean interrupt
28000 commit 42efed6130c8fcf7da881385b5427065d2801757
28001 Author: Michal Simek <monstr@monstr.eu>
28002 Date: Mon May 7 17:22:25 2007 +0200
28004 fix: interrupt handler for multiple sources
28006 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
28007 Author: Michal Simek <monstr@monstr.eu>
28008 Date: Mon May 7 17:11:09 2007 +0200
28010 new: add writing to msr register
28012 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
28013 Author: Markus Klotzbuecher <mk@denx.de>
28014 Date: Mon May 7 16:43:56 2007 +0200
28016 Fix an ancient CHANGELOG conflict
28018 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
28019 Author: Timur Tabi <timur@freescale.com>
28020 Date: Sat May 5 08:12:30 2007 +0200
28022 5xxx: write MAC address to mac-address and local-mac-address
28024 Some device trees have a mac-address property, some have local-mac-address,
28025 and some have both. To support all of these device trees, ftp_cpu_setup()
28026 should write the MAC address to mac-address and local-mac-address, if they
28029 Signed-off-by: Timur Tabi <timur@freescale.com>
28030 Acked-by: Grant Likely <grant.likely@secretlab.ca>
28032 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
28033 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
28034 Date: Sun Apr 29 14:01:54 2007 +0200
28036 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
28038 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
28039 message. Use PVR to distinguish between the two variants, and print proper CPU
28042 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
28043 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
28044 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28046 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
28047 Author: Ladislav Michl <ladis@linux-mips.org>
28048 Date: Wed Apr 25 16:01:26 2007 +0200
28050 [PATCH] simplify silent console
28052 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
28053 Acked-by: Stefan Roese <sr@denx.de>
28055 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
28056 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
28057 Date: Mon Apr 23 15:30:39 2007 +0200
28059 [PATCH] Avoid assigning PCI resources from zero address
28061 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
28062 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
28063 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
28064 sentence about "0" being considered an invalid address) -- so, use a reasonable
28065 starting value of 0x1000 (that's what the most Linux archs are using).
28067 Alternatively, one might have fixed the calls to pci_set_region() individually
28068 (some code even seems to have taken care of this issue) but that would have
28069 been a lot more work. :-)
28071 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
28072 Acked-by: Stefan Roese <sr@denx.de>
28074 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
28075 Author: Jeffrey Mann <mannj@embeddedplanet.com>
28076 Date: Mon Apr 23 14:00:11 2007 +0200
28078 [patch] setenv(...) can delete environmentalvariables
28080 update setenv() function so that entering a NULL value for the
28081 variable's value will delete the environmental variable
28083 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
28084 Acked-by: Stefan Roese <sr@denx.de>
28086 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
28087 Author: Mike Frysinger <vapier@gentoo.org>
28088 Date: Mon Apr 23 13:54:24 2007 +0200
28090 [patch] use unsigned char in smc91111 driver for mac
28092 the v_mac variable in the smc91111 driver is declared as a signed char ...
28093 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
28094 because when it gets printed out, you get a display like:
28095 0xFFFFFFE0 and that's no good
28097 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
28099 commit ffc50f9bb194343c6303517a517708457a5eb6b8
28100 Author: Michal Simek <monstr@monstr.eu>
28101 Date: Sat May 5 18:54:42 2007 +0200
28103 new: FSL and MSR support #2
28105 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
28106 Author: Michal Simek <monstr@monstr.eu>
28107 Date: Sat May 5 18:27:16 2007 +0200
28109 new: FSL and MSR support
28111 commit 2f15278c2eb911c668b4fe562130b78cf554d139
28112 Author: Wolfgang Denk <wd@denx.de>
28113 Date: Sat May 5 18:23:11 2007 +0200
28115 Coding stylke cleanup; update CHANGELOG.
28117 Signed-off-by: Wolfgang Denk <wd@denx.de>
28119 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
28120 Author: Wolfgang Denk <wd@denx.de>
28121 Date: Sat May 5 18:05:02 2007 +0200
28123 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
28125 Signed-off-by: Wolfgang Denk <wd@denx.de>
28127 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
28128 Author: Wolfgang Denk <wd@denx.de>
28129 Date: Sat May 5 17:15:50 2007 +0200
28131 Make "file" command happy with some config.mk files; update CHANGELOG
28133 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
28134 Author: Jeffrey Mann <mannj@embeddedplanet.com>
28135 Date: Sat May 5 08:32:14 2007 +0200
28137 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
28139 The AMCC Secquoia board has been changed in a new revision from using a
28140 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
28141 indicates the difference. This patch reads that bit and uses the correct
28142 clock speed for the board. This code is backward compatable will all
28143 prior boards. All prior boards will be read as 33.000.
28145 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
28146 Signed-off-by: Stefan Roese <sr@denx.de>
28148 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
28149 Author: Stefan Roese <sr@denx.de>
28150 Date: Sat May 5 08:29:01 2007 +0200
28152 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
28154 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
28155 for the 4k NAND boot image so define bus_frequency to 133MHz here
28156 which is save for the refresh counter setup.
28158 Signed-off-by: Stefan Roese <sr@denx.de>
28160 commit 2f550ab976405300f5b07bf2890800840d0aa05f
28161 Author: Timur Tabi <timur@freescale.com>
28162 Date: Sat May 5 08:12:30 2007 +0200
28164 5xxx: write MAC address to mac-address and local-mac-address
28166 Some device trees have a mac-address property, some have local-mac-address,
28167 and some have both. To support all of these device trees, ftp_cpu_setup()
28168 should write the MAC address to mac-address and local-mac-address, if they
28171 Signed-off-by: Timur Tabi <timur@freescale.com>
28172 Acked-by: Grant Likely <grant.likely@secretlab.ca>
28174 commit a79886590593ba1d667c840caa4940c61639f18f
28175 Author: Thomas Knobloch <knobloch@siemens.com>
28176 Date: Sat May 5 07:04:42 2007 +0200
28178 NAND: Wrong calculation of page number in nand_block_bad()
28180 In case that there is no memory based bad block table available the
28181 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
28182 nand_block_bad() directly. When parameter 'getchip' is set to zero,
28183 nand_block_bad() will not right shift the offset to calculate the
28184 correct page number.
28186 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
28187 Signed-off-by: Stefan Roese <sr@denx.de>
28189 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
28190 Author: Wolfgang Denk <wd@denx.de>
28191 Date: Fri May 4 10:02:33 2007 +0200
28193 Fix initrd length corruption in bootm command.
28195 When using FDT Images, the length of an inital ramdisk was
28196 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
28198 Patches by Timur Tabi & Johns Daniel.
28200 Signed-off-by: Wolfgang Denk <wd@denx.de>
28202 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
28203 Author: Kim Phillips <kim.phillips@freescale.com>
28204 Date: Thu May 3 19:43:52 2007 -0500
28206 mpc83xx: fix trivial error in MAKEALL
28208 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28210 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
28211 Author: Wolfgang Denk <wd@denx.de>
28212 Date: Thu May 3 16:34:41 2007 +0200
28214 Update board configuration for STX GP3SSA board:
28216 Enable hush shell, environment in flash rather in EEPROM,
28217 more user-friendly default environment, etc.
28218 The simple EEPROM environment can be selected easily in the board
28221 Signed-off-by: Wolfgang Denk <wd@denx.de>
28223 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
28224 Author: Wolfgang Denk <wd@denx.de>
28225 Date: Tue Apr 24 14:37:49 2007 +0200
28227 Cleanup STX GP3SSA code; fix build and compile problems.
28229 commit 35171dc04e028ecacc23ad916a66295472555dbf
28230 Author: Dan Malek <dan@embeddedalley.com>
28231 Date: Fri Jan 5 09:15:34 2007 +0100
28233 Add support for STX GP3SSA (stxssa) Board
28235 Signed-off-by Dan Malek, <dan@embeddedalley.com>
28237 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
28238 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
28239 Date: Wed May 2 13:31:53 2007 +0200
28241 macb: Don't restart autonegotiation if we already have link
28243 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
28244 link is already up.
28246 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
28248 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
28249 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
28250 Date: Wed May 2 13:22:38 2007 +0200
28252 macb: Introduce a few barriers when dealing with DMA descriptors
28254 There were a few theoretical possibilities that the compiler might
28255 optimize away DMA descriptor reads and/or writes and thus cause
28256 synchronization problems with the hardware. Insert barriers where
28257 we depend on reads/writes actually hitting memory.
28259 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
28261 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
28262 Author: Andy Fleming <afleming@freescale.com>
28263 Date: Sat Feb 24 01:08:13 2007 -0600
28265 Cleaned up some 85xx PCI bugs
28267 * Cleaned up the CDS PCI Config Tables and added NULL entries to
28269 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
28270 * Fixed 85xx PCI code to assign powar region sizes based on the
28271 config values (rather than hard-coding them)
28272 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
28274 Signed-off-by: Andy Fleming <afleming@freescale.com>
28276 commit 6743105988fc44d5b0d30388c790607835aae7a6
28277 Author: Andy Fleming <afleming@freescale.com>
28278 Date: Mon Apr 23 02:54:25 2007 -0500
28280 Add support for the 8568 MDS board
28282 This included some changes to common files:
28283 * Add 8568 processor SVR to various places
28284 * Add support for setting the qe bus-frequency value in the dts
28285 * Add the 8568MDS target to the Makefile
28287 Signed-off-by: Andy Fleming <afleming@freescale.com>
28289 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
28290 Author: David Updegraff <dave@cray.com>
28291 Date: Fri Apr 20 14:34:48 2007 -0500
28293 Add support for treating unknown PHYs as generic PHYs.
28295 When bringing up u-boot on new boards, PHY support sometimes gets
28296 neglected. Most PHYs don't really need any special support,
28297 though. By adding a generic entry that always matches if nothing
28298 else does, we can provide support for "unsupported" PHYs for the
28301 The generic PHY driver supports most PHYs, including gigabit.
28303 Signed-off-by: David Updegraff <dave@cray.com>
28304 Signed-off-by: Andy Fleming <afleming@freescale.com>
28306 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
28307 Author: James Yang <James.Yang@freescale.com>
28308 Date: Wed Feb 7 15:28:04 2007 -0600
28310 Conditionalize 8641 Rev1.0 MCM workarounds
28312 Signed-off-by: James Yang <James.Yang@freescale.com>
28313 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28315 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
28316 Author: Timur Tabi <timur@freescale.com>
28317 Date: Mon Apr 30 13:59:50 2007 -0500
28319 Fix memory initialization on MPC8349E-mITX
28321 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
28322 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
28323 on some ITX boards, notably those with a revision 3.1 CPU.
28325 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
28326 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
28328 Signed-off-by: Timur Tabi <timur@freescale.com>
28329 Acked-by: Michael Benedict <MBenedict@twacs.com>
28330 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28332 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
28333 Author: Kim Phillips <kim.phillips@freescale.com>
28334 Date: Mon Apr 30 15:26:21 2007 -0500
28336 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
28338 and fix CPU: to align with Board: display text.
28340 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28342 commit c1ab82669d9525998c34e802a12cad662723f22a
28343 Author: James Yang <James.Yang@freescale.com>
28344 Date: Fri Mar 16 13:02:53 2007 -0500
28346 Rewrote picos_to_clk() to avoid rounding errors.
28347 Clarified that conversion is to DRAM clocks rather than platform clocks.
28348 Made function static to spd_sdram.c.
28350 Signed-off-by: James Yang <James.Yang@freescale.com>
28351 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28353 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
28354 Author: Stefan Roese <sr@denx.de>
28355 Date: Sun Apr 29 14:13:01 2007 +0200
28357 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
28359 Signed-off-by: Stefan Roese <sr@denx.de>
28361 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
28362 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
28363 Date: Sun Apr 29 14:01:54 2007 +0200
28365 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
28367 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
28368 message. Use PVR to distinguish between the two variants, and print proper CPU
28371 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
28372 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
28373 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28375 commit 5c5d3242935cf3543af01142627494434834cf98
28376 Author: Kim Phillips <kim.phillips@freescale.com>
28377 Date: Wed Apr 25 12:34:38 2007 -0500
28379 mpc83xx: minor fixups for 8313rdb introduction
28381 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
28382 Author: Ladislav Michl <ladis@linux-mips.org>
28383 Date: Wed Apr 25 16:01:26 2007 +0200
28385 [PATCH] simplify silent console
28387 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
28388 Acked-by: Stefan Roese <sr@denx.de>
28390 commit 144876a380f5756f57412caf74c1d6dc201dd796
28391 Author: Michal Simek <monstr@monstr.eu>
28392 Date: Tue Apr 24 23:01:02 2007 +0200
28394 [PATCH] MTD partition support, JFFS2 support
28396 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
28397 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28398 Date: Tue Apr 24 14:03:45 2007 +0200
28400 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
28402 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28404 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
28405 Author: Andy Fleming <afleming@freescale.com>
28406 Date: Mon Apr 23 02:37:47 2007 -0500
28408 Reworked 85xx speed detection code
28410 Changed the code to read the registers and calculate the clock
28411 rates, rather than using a "switch" statement.
28413 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
28415 Signed-off-by: Andy Fleming <afleming@freescale.com>
28417 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
28418 Author: Andy Fleming <afleming@freescale.com>
28419 Date: Mon Apr 23 02:24:28 2007 -0500
28421 Enable 8544 support
28423 * Add support to the Makefile
28424 * Add 8544 configuration support to the tsec driver
28425 * Add 8544 SVR numbers to processor.h
28427 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
28428 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28430 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
28431 Author: Andy Fleming <afleming@freescale.com>
28432 Date: Fri Feb 23 17:12:25 2007 -0600
28434 Support 1G size on 8548
28436 e500v2 and newer cores support 1G page sizes.
28438 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
28439 Signed-off-by: Andy Fleming <afleming@freescale.com>
28441 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
28442 Author: Andy Fleming <afleming@freescale.com>
28443 Date: Fri Feb 23 17:11:16 2007 -0600
28445 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
28447 The other pagesz constants use one letter to specify order of
28448 magnitude. Also change the one reference to it in mpc8548cds/init.S
28450 Signed-off-by: Andy Fleming <afleming@freescale.com>
28452 commit 1f9a318cea14272edd10d63739e2d326c90f430e
28453 Author: Andy Fleming <afleming@freescale.com>
28454 Date: Fri Feb 23 16:28:46 2007 -0600
28456 Only set ddrioovcr for 8548 rev1.
28458 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
28459 Signed-off-by: Andy Fleming <afleming@freescale.com>
28461 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
28462 Author: Andy Fleming <afleming@freescale.com>
28463 Date: Sat Feb 24 01:16:45 2007 -0600
28465 Tweak DDR ECC error counter
28467 Enable single-bit error counter when memory was cleared by ddr controller.
28469 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
28470 Signed-off-by: Andy Fleming <afleming@freescale.com>
28472 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
28473 Author: Timur Tabi <timur@freescale.com>
28474 Date: Mon Feb 12 13:34:55 2007 -0600
28476 85xx: write MAC address to mac-address and local-mac-address
28478 Some device trees have a mac-address property, some have local-mac-address,
28479 and some have both. To support all of these device trees, ftp_cpu_setup()
28480 should write the MAC address to mac-address and local-mac-address, if they
28483 Signed-off-by: Timur Tabi <timur@freescale.com>
28485 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
28486 Author: Andy Fleming <afleming@freescale.com>
28487 Date: Mon Apr 23 01:44:44 2007 -0500
28489 Some 85xx cpu cleanups
28491 * Cleaned up the TSR[WIS] clearing
28492 * Cleaned up DMA initialization
28494 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
28495 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28496 Acked-by: Andy Fleming <afleming@freescale.com>
28498 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
28499 Author: Andy Fleming <afleming@freescale.com>
28500 Date: Mon Apr 23 01:32:22 2007 -0500
28502 Add cpu support for the 8544
28504 Recognize new SVR values, and add a few register definitions
28506 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
28507 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28508 Acked-by: Andy Fleming <afleming@freescale.com>
28510 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
28511 Author: Jon Loeliger <jdl@freescale.com>
28512 Date: Wed Apr 11 16:51:02 2007 -0500
28514 Add MPC8544DS basic port board files.
28516 Add board port under new board/freescale directory
28517 structure and reuse existing PIXIS FPGA support there.
28519 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
28520 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28522 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
28523 Author: Jon Loeliger <jdl@freescale.com>
28524 Date: Wed Apr 11 16:50:57 2007 -0500
28526 Add MPC8544DS main configuration file.
28528 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
28529 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28531 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
28532 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
28533 Date: Wed Dec 27 22:07:15 2006 +0300
28535 Fix PCI I/O space mapping on Freescale MPC85x0ADS
28537 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
28538 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
28539 describing the local address window used for the PCI I/O space accesses -- fix
28540 this and carry over the necessary changes into the MPC8560ADS code since the
28541 PCI I/O space mapping was also broken for this board (by the earlier commit
28542 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
28543 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
28545 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
28547 board/mpc8540ads/init.S | 4 ++--
28548 board/mpc8560ads/init.S | 4 ++--
28549 include/configs/MPC8540ADS.h | 5 ++---
28550 include/configs/MPC8541CDS.h | 2 +-
28551 include/configs/MPC8548CDS.h | 2 +-
28552 include/configs/MPC8560ADS.h | 8 ++++----
28553 6 files changed, 12 insertions(+), 13 deletions(-)
28555 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
28556 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
28557 Date: Tue Dec 5 16:42:30 2006 +0800
28559 u-boot: Fix e500 v2 core reset bug
28561 The following patch fixes the e500 v2 core reset bug.
28562 For e500 v2 core, a new reset control register is added to reset the
28565 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
28567 commit 63247a5acd58032e6cf33f525bc3923b467bac88
28568 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
28569 Date: Wed Dec 20 11:01:00 2006 +0800
28571 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
28573 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
28574 entry number to control the loop. This can reduce the potential risk
28575 for the 85xx processor increasing its TLB adn LAW entry number.
28577 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
28578 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
28580 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
28581 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
28582 Date: Mon Dec 18 17:01:04 2006 +0800
28584 u-boot: Fix the 85xxcds tsec bug
28586 Fix the 85xxcds tsec bug.
28587 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
28589 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
28591 commit 7337b237ffc4aaf1b9467024fe472a880d852598
28592 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
28593 Date: Fri Dec 15 14:43:31 2006 +0800
28595 u-boot: Fix CPU2 errata on MPC8548CDS board
28597 This patch apply workaround of CPU2 errata on MPC8548CDS board.
28599 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
28601 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
28602 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
28603 Date: Mon Dec 18 16:25:15 2006 +0800
28605 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
28607 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
28609 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
28611 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
28612 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
28613 Date: Thu Dec 14 14:14:55 2006 +0800
28615 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
28617 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
28619 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
28621 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
28622 Author: Scott Wood <scottwood@freescale.com>
28623 Date: Mon Apr 16 14:54:15 2007 -0500
28625 mpc83xx: Add MPC8313ERDB support.
28627 Signed-off-by: Scott Wood <scottwood@freescale.com>
28629 commit 49ea3b6eafe606285ae4d5c378026153dde53200
28630 Author: Scott Wood <scottwood@freescale.com>
28631 Date: Mon Apr 16 14:34:21 2007 -0500
28633 mpc83xx: Add generic PCI setup code.
28635 Board code can now request the generic setup code rather than having to
28636 copy-and-paste it for themselves. Boards should be converted to use this
28637 once they're tested with it.
28639 Signed-off-by: Scott Wood <scottwood@freescale.com>
28641 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
28642 Author: Scott Wood <scottwood@freescale.com>
28643 Date: Mon Apr 16 14:34:19 2007 -0500
28645 mpc83xx: Add 831x support to speed.c.
28647 Signed-off-by: Scott Wood <scottwood@freescale.com>
28649 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
28650 Author: Scott Wood <scottwood@freescale.com>
28651 Date: Mon Apr 16 14:34:18 2007 -0500
28653 mpc83xx: Add 831x support to global_data.h
28655 Signed-off-by: Scott Wood <scottwood@freescale.com>
28657 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
28658 Author: Scott Wood <scottwood@freescale.com>
28659 Date: Mon Apr 16 14:34:16 2007 -0500
28661 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
28663 Rather than misleadingly define PVR_83xx as the specific type of 83xx
28664 being built for, the PVR of each core revision is defined. checkcpu() now
28665 prints the core that it detects, rather than aborting if it doesn't find
28666 what it thinks it wants.
28668 Signed-off-by: Scott Wood <scottwood@freescale.com>
28670 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
28671 Author: Scott Wood <scottwood@freescale.com>
28672 Date: Mon Apr 16 14:34:15 2007 -0500
28674 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
28676 Signed-off-by: Scott Wood <scottwood@freescale.com>
28678 commit d87c57b201b4572d16f1b642998faa00c9912b16
28679 Author: Scott Wood <scottwood@freescale.com>
28680 Date: Mon Apr 16 14:31:55 2007 -0500
28682 mpc83xx: Add register definitions for MPC831x.
28684 Signed-off-by: Scott Wood <scottwood@freescale.com>
28686 commit 7fc4c71a143be8666d70803fb25ae60379c95622
28687 Author: Stefan Roese <sr@denx.de>
28688 Date: Mon Apr 23 15:39:59 2007 +0200
28692 Signed-off-by: Stefan Roese <sr@denx.de>
28694 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
28695 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
28696 Date: Mon Apr 23 15:30:39 2007 +0200
28698 [PATCH] Avoid assigning PCI resources from zero address
28700 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
28701 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
28702 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
28703 sentence about "0" being considered an invalid address) -- so, use a reasonable
28704 starting value of 0x1000 (that's what the most Linux archs are using).
28706 Alternatively, one might have fixed the calls to pci_set_region() individually
28707 (some code even seems to have taken care of this issue) but that would have
28708 been a lot more work. :-)
28710 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
28711 Acked-by: Stefan Roese <sr@denx.de>
28713 commit afb903a2eb9436baa9270ccc0c27082d86497d89
28714 Author: Jeffrey Mann <mannj@embeddedplanet.com>
28715 Date: Mon Apr 23 14:00:11 2007 +0200
28717 [patch] setenv(...) can delete environmentalvariables
28719 update setenv() function so that entering a NULL value for the
28720 variable's value will delete the environmental variable
28722 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
28723 Acked-by: Stefan Roese <sr@denx.de>
28725 commit 36f104e5caa747d568eff26b369565af57c2ffa6
28726 Author: Mike Frysinger <vapier@gentoo.org>
28727 Date: Mon Apr 23 13:54:24 2007 +0200
28729 [patch] use unsigned char in smc91111 driver for mac
28731 the v_mac variable in the smc91111 driver is declared as a signed char ...
28732 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
28733 because when it gets printed out, you get a display like:
28734 0xFFFFFFE0 and that's no good
28736 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
28738 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
28739 Author: Rodolfo Giometti <giometti@enneenne.com>
28740 Date: Mon Apr 23 13:10:52 2007 +0200
28742 USB: (Another) delay for crappy USB keys.
28744 Some USB keys are slow in giving back an answer when the Root HUB
28745 enables power lines.
28747 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
28749 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
28750 Author: Stefan Roese <sr@denx.de>
28751 Date: Mon Apr 23 12:00:22 2007 +0200
28753 Remove BOARDLIBS usage completely
28755 Signed-off-by: Stefan Roese <sr@denx.de>
28757 commit 32556443840f127170e4baa8bdd5b567039f6c36
28758 Author: Michal Simek <monstr@monstr.eu>
28759 Date: Sat Apr 21 21:07:22 2007 +0200
28761 [PATCH] SystemACE support for Microblaze
28763 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
28764 Author: Michal Simek <monstr@monstr.eu>
28765 Date: Sat Apr 21 21:02:40 2007 +0200
28767 16bit read/write little endian
28769 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
28770 Author: Michal Simek <monstr@monstr.eu>
28771 Date: Sat Apr 21 20:53:31 2007 +0200
28773 Change ML401 parameters - Xilinx BSP
28775 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
28776 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
28777 Date: Wed Feb 28 05:37:29 2007 -0600
28779 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
28781 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
28783 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
28784 Author: Zhang Wei <wei.zhang@freescale.com>
28785 Date: Fri Jan 19 10:42:37 2007 +0800
28787 Enable LAWs for MPC8641 PCI-Ex2.
28789 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
28790 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28792 commit bd7851ce1e1f140665b520026abf1042968b1102
28793 Author: Jon Loeliger <jdl@freescale.com>
28794 Date: Fri Apr 20 14:12:26 2007 -0500
28796 mpc86xx; Write MAC address to mac-address and local-mac-address
28798 Some device trees have a mac-address property, some have local-mac-address,
28799 and some have both. To support all of these device trees, ftp_cpu_setup()
28800 should write the MAC address to mac-address and local-mac-address, if they
28803 Signed-off-by: Timur Tabi <timur@freescale.com>
28804 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28806 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
28807 Author: Jon Loeliger <jdl@freescale.com>
28808 Date: Fri Apr 20 14:11:38 2007 -0500
28810 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
28812 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
28813 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28815 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
28816 Author: Wolfgang Denk <wd@denx.de>
28817 Date: Fri Apr 20 17:43:28 2007 +0200
28819 Cleanup compiler warnings, update CHANGELOG
28821 Signed-off-by: Wolfgang Denk <wd@denx.de>
28823 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
28824 Author: Detlev Zundel <dzu@denx.de>
28825 Date: Fri Apr 20 12:01:47 2007 +0200
28827 Fix breakage of NC650 board with respect to nand support.
28829 Signed-off-by: Detlev Zundel <dzu@denx.de>
28831 commit 39f23cd90947639ac278a18ff277ec786b5ac167
28832 Author: Domen Puncer <domen.puncer@telargo.com>
28833 Date: Fri Apr 20 11:13:16 2007 +0200
28835 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
28837 G2 core reference manual says decrementer and time base
28838 are decreasing/increasing once every 4 bus clock cycles.
28839 Lets fix it, so time in Linux won't run twice as fast
28841 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
28842 Acked-by: Grant Likely <grant.likely@secretlab.ca>
28844 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
28845 Author: Gerald Van Baren <vanbaren@cideas.com>
28846 Date: Thu Apr 19 23:14:39 2007 -0400
28848 Fix serious pointer bug with bootm and reserve map.
28850 What was suppose to be a stack variable was declared as a pointer,
28851 overwriting random memory.
28852 Also moved the libfdt.a requirement into the main Makefile. That is
28855 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
28856 Author: Stefan Roese <sr@denx.de>
28857 Date: Thu Apr 19 09:53:52 2007 +0200
28859 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
28861 Previous versions used full wait states for the chip select #1 which
28862 is connected to the Xilinix SystemACE controller on the AMCC Katmai
28863 evaluation board. This leads to really slow access and therefore low
28864 performance. This patch now sets up the chip select a lot faster
28865 resulting in much better read/write performance of the Linux driver.
28867 Signed-off-by: Stefan Roese <sr@denx.de>
28869 commit 37837828d89084879bee2f2b8c7c68d4695940df
28870 Author: Wolfgang Denk <wd@denx.de>
28871 Date: Wed Apr 18 17:49:29 2007 +0200
28873 Clenaup, update CHANGELOG
28875 Signed-off-by: Wolfgang Denk <wd@denx.de>
28877 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
28878 Author: Wolfgang Denk <wd@denx.de>
28879 Date: Wed Apr 18 17:20:58 2007 +0200
28883 Signed-off-by: Wolfgang Denk <wd@denx.de>
28885 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
28886 Author: Wolfgang Denk <wd@denx.de>
28887 Date: Wed Apr 18 17:07:26 2007 +0200
28889 Cleanup, update CHANGELOG
28891 Sigend-off-by: Wolfgang Denk <wd@denx.de>
28893 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
28894 Author: Wolfgang Denk <wd@denx.de>
28895 Date: Wed Apr 18 16:17:46 2007 +0200
28899 commit ad4eb555671d97f96dc56eab55103b1f86874b01
28900 Author: Wolfgang Denk <wd@denx.de>
28901 Date: Wed Apr 18 14:30:39 2007 +0200
28903 MCC200 board: remove warning which is obsolete after PSoC firmware changes
28905 Signed-off-by: Wolfgang Denk <wd@denx.de>
28907 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
28908 Author: Domen Puncer <domen.puncer@telargo.com>
28909 Date: Wed Apr 18 12:11:05 2007 +0200
28911 [PATCH] icecube/lite5200b: document wakeup from low-power support
28913 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
28915 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
28916 Author: Stefan Roese <sr@denx.de>
28917 Date: Wed Apr 18 12:07:47 2007 +0200
28919 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
28921 Signed-off-by: Stefan Roese <sr@denx.de>
28923 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
28924 Author: Stefan Roese <sr@denx.de>
28925 Date: Wed Apr 18 12:05:59 2007 +0200
28927 ppc4xx: Add output for bootrom location to 405EZ ports
28929 Now 405EZ ports also show upon bootup from which boot device
28930 they are configured to boot:
28932 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
28934 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
28935 Bootstrap Option E - Boot ROM Location EBC (32 bits)
28936 16 kB I-Cache 16 kB D-Cache
28937 Board: Acadia - AMCC PPC405EZ Evaluation Board
28939 Signed-off-by: Stefan Roese <sr@denx.de>
28941 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
28942 Author: Peter Pearse <peter.pearse@arm.com>
28943 Date: Tue Apr 17 13:30:33 2007 +0100
28945 Move ppearse to ARM board list
28946 Add Konstantin Kletschke for scb9328.
28947 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
28949 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
28950 Author: Domen Puncer <domen.puncer@telargo.com>
28951 Date: Mon Apr 16 14:00:13 2007 +0200
28953 [PATCH] icecube/lite5200b: wakeup from low-power support
28955 U-Boot part of Lite5200b low power mode support.
28956 Puts SDRAM out of self-refresh and transfers control to
28957 address saved at physical 0x0.
28959 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
28960 Acked-by: Grant Likely <grant.likely@secretlab.ca>
28962 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
28963 Author: Gerald Van Baren <vanbaren@cideas.com>
28964 Date: Sun Apr 15 13:54:26 2007 -0400
28966 Fix the ft_cpu_setup() property settings.
28968 Use "setter" functions instead of flags, cleaner and more flexible.
28969 It also fixes the problem noted by Timur Tabi that the ethernet MAC
28970 addresses were all being set incorrectly to the same MAC address.
28972 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
28973 Author: Gerald Van Baren <vanbaren@cideas.com>
28974 Date: Sat Apr 14 22:51:24 2007 -0400
28976 Improve the bootm command for CONFIG_OF_LIBFDT
28978 In bootm, create the "/chosen" node only if it doesn't already exist
28979 (better matches the previous behavior).
28980 Update for proper reserved memory map handling for initrd.
28982 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
28983 Author: Gerald Van Baren <vanbaren@cideas.com>
28984 Date: Sat Apr 14 22:46:41 2007 -0400
28986 Add some utilities to manipulate the reserved memory map.
28988 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
28989 Author: Wolfgang Denk <wd@denx.de>
28990 Date: Sat Apr 14 21:16:54 2007 +0200
28994 commit 8e6875183cdca91c134408d119d4abcd48ef6856
28995 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
28996 Date: Sun Dec 17 18:56:46 2006 +0100
28998 AVR32: Enable MMC support
29000 Set up the portmux for the MMC interface and enable the MMC driver
29001 along with support for DOS partitions, ext2 and FAT filesystems.
29003 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29005 commit fc26c97bb6df41b4a95662c34054fe912387bf38
29006 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29007 Date: Fri Jan 20 10:03:53 2006 +0100
29011 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
29013 The AT91 ARM-based CPUs use basically the same hardware, so it should
29014 be possible to share this driver, but no effort has been made so far.
29016 Hardware documentation can be found in the AT32AP7000 data sheet,
29017 which can be downloaded from
29019 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
29021 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29023 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
29024 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29025 Date: Sun Dec 17 18:55:37 2006 +0100
29027 AVR32: Add clk and gpio infrastructure for mmci
29029 Implement functions for configuring the mmci pins, as well as
29030 functions for getting the clock rate of the mmci controller.
29032 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29034 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
29035 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29036 Date: Sun Dec 17 18:53:56 2006 +0100
29038 Enable partition support with MMC
29040 Include implementations of init_part() and get_partition_info() when
29043 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29045 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
29046 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29047 Date: Sun Dec 17 17:14:30 2006 +0100
29049 AVR32: Enable networking
29051 Implement MACB initialization for AVR32 and ATSTK1000, and turn
29052 everything on, including the MACB driver.
29054 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29056 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
29057 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29058 Date: Fri Jan 20 10:03:34 2006 +0100
29060 Atmel MACB ethernet driver
29062 Driver for the Atmel MACB on-chip ethernet controller.
29064 This driver has been tested on the ATSTK1000 board with a AT32AP7000
29065 CPU. It should probably work on AT91SAM926x as well with some minor
29068 Hardware documentation can be found in the AT32AP7000 data sheet,
29069 which can be downloaded from
29071 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
29073 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29075 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
29076 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29077 Date: Sun Dec 17 16:56:14 2006 +0100
29079 AVR32: Add clk and gpio infrastructure for macb0 and macb1
29081 Implement functions for configuring the macb0 and macb1 pins, as
29082 well as functions for getting the clock rate of the various
29083 busses the macb ethernet controllers are connected to.
29085 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29087 commit d5acb95b16a0a74c643524342c3437e765426d05
29088 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29089 Date: Sun Dec 17 15:39:15 2006 +0100
29091 AVR32: Implement simple DMA memory allocator
29093 Implement dma_alloc_coherent() which returns cache-aligned
29094 uncacheable memory.
29096 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29098 commit 91975b0fea773c9e681fea8cf3349669f27685ee
29099 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29100 Date: Sun Dec 17 15:46:02 2006 +0100
29102 Import <linux/mii.h> from the Linux kernel
29104 Instead of creating yet another set of MII register definitions
29105 in the macb driver, here's a complete set of definitions for everyone
29108 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29110 commit 1b804b229556a4d862da93c0ec94e79419364b2c
29111 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29112 Date: Wed Mar 21 19:47:36 2007 +0100
29114 AVR32: Include more commands for ATSTK1000
29116 Include the imi, imls and jffs commands sets by default on ATSTK1000.
29117 Also define CONFIG_BOOTARGS to something more useful, define
29118 CONFIG_BOOTCOMMAND and enable autoboot by default.
29120 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29122 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
29123 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29124 Date: Wed Mar 21 19:44:48 2007 +0100
29126 AVR32: Provide a definition of struct stat
29128 Copy the definition of struct stat from the Linux kernel.
29130 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29132 commit 12f099c08167a7a51aeee623bc16dafd0841271c
29133 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29134 Date: Sun Dec 17 14:46:06 2006 +0100
29136 AVR32: Use initdram() instead of board_init_memories()
29138 Conform to the "standard" interface and use initdram() instead of
29139 board_init_memories() on AVR32. This enables us to get rid of the
29140 sdram_size member of the global_data struct as well.
29142 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29144 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
29145 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29146 Date: Mon Nov 20 15:53:10 2006 +0100
29148 AVR32: Relocate u-boot to SDRAM
29150 Relocate the u-boot image into SDRAM like everyone else does. This
29151 means that we can handle much larger .data and .bss than we used to.
29153 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29155 commit df548d3c3e2bbc40258713167859ffc2ce99a900
29156 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29157 Date: Sun Nov 19 18:06:53 2006 +0100
29159 AVR32: Resource management rewrite
29161 Rewrite the resource management code (i.e. I/O memory, clock gating,
29162 gpio) so it doesn't depend on any global state. This is necessary
29163 because this code is heavily used before relocation to RAM, so we
29164 can't write to any global variables.
29166 As an added bonus, this makes u-boot's memory footprint a bit smaller,
29167 although some functionality has been left out; all clocks are enabled
29168 all the time, and there's no checking for gpio line conflicts.
29170 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29172 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
29173 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29174 Date: Sat Nov 18 18:01:13 2006 +0100
29176 AVR32: Clean up memory-map.h for at32ap7000
29178 Convert spaces to tabs (must have missed this one last time around),
29179 sort the entries by address and group them together by bus
29182 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29184 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
29185 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29186 Date: Sat Nov 18 17:32:31 2006 +0100
29188 AVR32: Build position-independent u-boot
29190 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
29191 position independent. This will make relocation a lot easier.
29193 -mno-init-got means that gcc shouldn't emit code to load the GOT
29194 address into r6 in every function prologue. We do it once and for
29195 all in the early startup assembly code, so enabling this option
29196 makes u-boot a bit faster and smaller.
29198 The assembly parts have always been position-independent, so no code
29199 changes should be necessary.
29201 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29203 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
29204 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29205 Date: Sat Nov 18 17:24:31 2006 +0100
29207 AVR32: Use avr32-linux- cross-compilation prefix by default
29209 It doesn't really matter which toolchain you use to compile u-boot,
29210 but the avr32-linux one is probably what most people have installed.
29212 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29214 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
29215 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29216 Date: Sat Nov 18 17:15:30 2006 +0100
29218 AVR32: Split start_u_boot into board_init_f and board_init_r
29220 Split the avr32 initialization code into a function to run before
29221 relocation, board_init_f and a function to run after relocation,
29222 board_init_r. For now, board_init_f simply calls board_init_r
29225 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29227 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
29228 Author: Heiko Schocher <hs@pollux.denx.de>
29229 Date: Sat Apr 14 05:26:48 2007 +0200
29231 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
29232 clear the Display after reset.
29234 Signed-off-by: Heiko Schocher <hs@denx.de>
29236 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
29237 Author: Denis Peter <d.peter@mpl.ch>
29238 Date: Fri Apr 13 09:13:33 2007 +0200
29240 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
29242 Fix bug introduced by "Fix get_partition_info() parameter error in all
29243 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
29244 to use diskboot or scsiboot form another device than 0.
29246 Signed-off-by: Denis Peter <d.peter@mpl.ch>
29248 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
29249 Author: Greg Lopp <lopp@pobox.com>
29250 Date: Fri Apr 13 08:02:24 2007 +0200
29252 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
29254 Signed-of-by: Greg Lopp <lopp@pobox.com>
29255 Acked-by: Grant Likely <grant.likely@secretlab.ca>
29257 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
29258 Author: Xie Xiaobo <r63061@freescale.com>
29259 Date: Fri Mar 9 19:08:25 2007 +0800
29261 Fix two bugs for MPC83xx DDR2 controller SPD Init
29263 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
29264 the first bug is that the picos_to_clk routine introduces a huge
29265 rounding error in 83xx.
29266 the second bug is that the mode register write recovery field is
29267 tWR-1, not tWR >> 1.
29269 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
29270 Author: Jeffrey Mann <mannj@embeddedplanet.com>
29271 Date: Thu Apr 12 14:15:59 2007 +0200
29273 ppc4xx: Fix i2c divisor calcularion for PPC4xx
29275 This patch fixes changes the i2c_init(...) function to use the function
29276 get_OPB_freq() rather than calculating the OPB speed by
29277 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
29278 specific per processor. The prior method was not and so was calculating
29279 the wrong speed for some PPC4xx processors.
29281 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
29282 Signed-off-by: Stefan Roese <sr@denx.de>
29284 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
29285 Author: Wolfgang Denk <wd@denx.de>
29286 Date: Wed Apr 11 17:25:01 2007 +0200
29290 Signed-off-by: Wolfgang Denk <wd@denx.de>
29292 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
29293 Author: Wolfgang Denk <wd@denx.de>
29294 Date: Wed Apr 11 17:22:55 2007 +0200
29296 Update for SC3 board
29298 * Make IDE timeout configurable through ide_reset_timeout variable.
29299 * Use Newline as "password" string
29300 * Use just a single partition in NAND flash
29302 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
29303 Author: Haiying Wang <haiying.wang@freescale.com>
29304 Date: Mon Jan 22 12:37:30 2007 -0600
29306 Add PIXIS FPGA support for MPC8641HPCN board.
29308 Move the 8641HPCN's PIXIS code to the new directory
29309 board/freescale/common/ as it will be shared by
29310 future boards not in the same processor family.
29312 Write a "pixis_reset" command that utilizes the FPGA
29313 reset sequencer to support alternate soft-reset options
29314 such as using the "alternate" flash bank, enabling
29315 the watch dog, or choosing different CPU frequencies.
29317 Add documentation for the pixis_reset to README.mpc8641hpcn.
29319 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
29320 Signed-off-by: Jon Loeliger <jdl@freescale.com>
29322 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
29323 Author: Gerald Van Baren <vanbaren@cideas.com>
29324 Date: Fri Apr 6 14:19:43 2007 -0400
29326 Moved fdt command support code to fdt_support.c
29328 ...in preparation for improving the bootm command's handling of fdt blobs.
29329 Also cleaned up some coding sloppiness.
29331 commit 6679f9299534e488a171a9bb8f9bb891de247aab
29332 Author: Gerald Van Baren <vanbaren@cideas.com>
29333 Date: Fri Apr 6 14:17:14 2007 -0400
29335 libfdt: Make fdt_check_header() public
29337 Changed _fdt_check_header() to fdt_check_header() and made it part of
29338 the interface - it is a useful routine.
29340 Also did some asthetics cleanup to the include files (headers).
29342 commit c0707ce65677650b5ceab0500ee50ae5168afef2
29343 Author: Aubrey Li <aubrey.adi@gmail.com>
29344 Date: Thu Apr 5 18:34:06 2007 +0800
29346 [Blackfin][PATCH] Kill off a bunch of common local prototypes
29348 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
29349 Author: Aubrey Li <aubrey.adi@gmail.com>
29350 Date: Thu Apr 5 18:33:04 2007 +0800
29352 [Blackfin][PATCH] Fix dynamic CPLB generation issue
29354 commit 0445e3a264251d75b1be45ef713c70726a2952f0
29355 Author: Aubrey Li <aubrey.adi@gmail.com>
29356 Date: Thu Apr 5 18:31:47 2007 +0800
29358 [Blackfin][PATCH] minior cleanup
29360 commit 155fd766573981090e638b493d5857562151862e
29361 Author: Aubrey Li <aubrey.adi@gmail.com>
29362 Date: Thu Apr 5 18:31:18 2007 +0800
29364 [Blackfin][PATCH] Fix copyright and update license
29366 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
29367 Author: Aubrey Li <aubrey.adi@gmail.com>
29368 Date: Thu Apr 5 18:30:25 2007 +0800
29370 [Blackfin][PATCH] Add BF537 EMAC driver initialization
29372 commit 889256e8604e0c68db1d866d720894dffede9df6
29373 Author: Aubrey Li <aubrey.adi@gmail.com>
29374 Date: Thu Apr 5 18:29:55 2007 +0800
29376 [Blackfin][PATCH] call real the system synchronize instruction
29378 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
29379 Author: Aubrey Li <aubrey.adi@gmail.com>
29380 Date: Thu Apr 5 18:29:17 2007 +0800
29382 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
29384 commit dfeeab2cd680df047e68e723b246adf6f33bb556
29385 Author: Aubrey Li <aubrey.adi@gmail.com>
29386 Date: Thu Apr 5 18:28:34 2007 +0800
29388 [Blackfin][PATCH]: fix flash unaligned copy issue
29390 commit 443feb740584e406efa203af909fe2926608e8d5
29391 Author: Igor Marnat <marny@rambler.ru>
29392 Date: Wed Mar 21 09:55:01 2007 +0300
29394 Update usage of 'nc' in README.NetConsole
29396 Added information about usage of NetConsole on systems where the -l and -p
29397 switches are mutually exclusive.
29399 Signed-off-by: Igor Marnat <marny@rambler.ru>
29400 Signed-off-by: Ben Warren <bwarren@qstreams.com>
29402 commit 31c98a88228021b314c89ebb8104fb6473da4471
29403 Author: Wolfgang Denk <wd@denx.de>
29404 Date: Wed Apr 4 02:09:30 2007 +0200
29406 Minor coding style cleanup.
29408 commit 94abd7c0583ebe01e799b25f451201deeaab550d
29409 Author: Wolfgang Denk <wd@denx.de>
29410 Date: Wed Apr 4 01:49:15 2007 +0200
29414 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
29415 Author: Rodolfo Giometti <giometti@enneenne.com>
29416 Date: Tue Apr 3 14:27:18 2007 +0200
29418 Support for the Philips ISP116x HCD (Host Controller Driver)
29420 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
29422 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
29423 Author: Markus Klotzbuecher <mk@denx.de>
29424 Date: Tue Apr 3 14:27:08 2007 +0200
29426 USB: cleanup monahans usb support. Remove dead code.
29428 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29430 commit a65c5768e5537530bd1780af3d3fddc3113a163c
29431 Author: Stefan Roese <sr@denx.de>
29432 Date: Mon Apr 2 10:09:30 2007 +0200
29434 ppc4xx: Change SysACE address on Katmai
29436 With this new base address of the Xilinx SystemACE controller
29437 the Linux driver will be easier to adapt, since it can now be
29438 mapped via the "normal" ioremap() call.
29440 Signed-off-by: Stefan Roese <sr@denx.de>
29442 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
29443 Author: Gerald Van Baren <vanbaren@cideas.com>
29444 Date: Sat Mar 31 14:30:53 2007 -0400
29446 Fix some minor whitespace violations.
29448 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
29449 Author: Gerald Van Baren <vanbaren@cideas.com>
29450 Date: Sat Mar 31 12:23:51 2007 -0400
29452 Add a flattened device tree (fdt) command (2 of 2)
29454 Modifications to the existing code to support the new fdt command.
29456 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
29457 Author: Gerald Van Baren <vanbaren@cideas.com>
29458 Date: Sat Mar 31 12:22:10 2007 -0400
29460 Add a flattened device tree (fdt) command (1 of 2)
29462 The fdt command uses David Gibson's libfdt library to manipulate as well
29463 as print the flattened device tree. This patch is the new command,
29464 the second part is the modifications to the existing code.
29466 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
29467 Author: Gerald Van Baren <vanbaren@cideas.com>
29468 Date: Sat Mar 31 12:13:43 2007 -0400
29470 libfdt: Enhanced and published fdt_next_tag()
29472 Enhanced the formerly private function _fdt_next_tag() to allow stepping
29473 through the tree, used to produce a human-readable dump, and made
29474 it part of the published interface.
29475 Also added some comments.
29477 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
29478 Author: Gerald Van Baren <vanbaren@cideas.com>
29479 Date: Sat Mar 31 12:05:39 2007 -0400
29481 libfdt: Customizations for use by u-boot.
29483 Changes to David Gibson's original source to fit into u-boot's
29484 environment. No functionality changes.
29486 commit 35748177c64a4a83a00057e93bb33e40278a2a96
29487 Author: Gerald Van Baren <vanbaren@cideas.com>
29488 Date: Sat Mar 31 12:00:56 2007 -0400
29490 libfdt: Import libfdt source (2 of 2)
29492 This adds the applicable libfdt source files (unmodified) and a README
29493 to explain where the source came from.
29495 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
29496 Author: Gerald Van Baren <vanbaren@cideas.com>
29497 Date: Sat Mar 31 11:59:59 2007 -0400
29499 libfdt: Import libfdt source (1 of 2)
29501 This adds the applicable libfdt source files (unmodified) and a README
29502 to explain where the source came from.
29504 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
29505 Author: Stefan Roese <sr@denx.de>
29506 Date: Sat Mar 31 13:16:23 2007 +0200
29508 ppc4xx: Update Katmai bootstrap command
29510 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
29513 Signed-off-by: Stefan Roese <sr@denx.de>
29515 commit cabee756a6532986729477c3cc1ea16ef8517ad2
29516 Author: Stefan Roese <sr@denx.de>
29517 Date: Sat Mar 31 13:15:06 2007 +0200
29519 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
29521 Additional RAM information is now printed upon powerup, like
29522 DDR2 frequency and CAS latency.
29524 Signed-off-by: Stefan Roese <sr@denx.de>
29526 commit 60723803431ac75cad085690789e433d5ab9174e
29527 Author: Stefan Roese <sr@denx.de>
29528 Date: Sat Mar 31 08:48:36 2007 +0200
29530 ppc4xx: Change Yucca config file to support ECC
29532 With the updated 44x DDR2 driver the Yucca board now supports
29533 ECC generation and checking.
29535 Signed-off-by: Stefan Roese <sr@denx.de>
29537 commit 490e5730c674b20d708b783a2c5ffd7208f83873
29538 Author: Stefan Roese <sr@denx.de>
29539 Date: Sat Mar 31 08:47:34 2007 +0200
29541 ppc4xx: Fix "bootstrap" command for Katmai board
29543 The board specific "bootstrap" command is now fixed and can
29544 be used for the AMCC Katmai board to configure different
29545 CPU/PLB/OPB frequencies.
29547 Signed-off-by: Stefan Roese <sr@denx.de>
29549 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
29550 Author: Stefan Roese <sr@denx.de>
29551 Date: Sat Mar 31 08:46:08 2007 +0200
29553 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
29555 Fix a bug in the auto calibration routine. This driver now runs
29556 more reliable with the tested modules. It's also tested with
29557 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
29559 Signed-off-by: Stefan Roese <sr@denx.de>
29561 commit 342cd097be1e7affe82f42ab3da220959a699e64
29562 Author: Michal Simek <monstr@monstr.eu>
29563 Date: Fri Mar 30 22:52:09 2007 +0200
29565 [PATCH] Clean include dependence
29567 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
29568 Author: Michal Simek <monstr@monstr.eu>
29569 Date: Fri Mar 30 22:42:45 2007 +0200
29571 [CLEAN] Remove inefficient Suzaku code
29573 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
29574 Author: Stefan Roese <sr@denx.de>
29575 Date: Wed Mar 28 15:03:16 2007 +0200
29577 Merge some AMCC make targets to keep the top-level Makefile smaller
29579 Signed-off-by: Stefan Roese <sr@denx.de>
29581 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
29582 Author: Stefan Roese <sr@denx.de>
29583 Date: Wed Mar 28 14:52:12 2007 +0200
29585 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
29587 The "old" i2c commands (iprobe, imd...) are now compiled in again,
29588 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
29591 Signed-off-by: Stefan Roese <sr@denx.de>
29593 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
29594 Author: Michal Simek <monstr@monstr.eu>
29595 Date: Tue Mar 27 00:32:16 2007 +0200
29597 PATCH: Resolve GPL license problem
29599 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
29600 Author: Rodolfo Giometti <giometti@enneenne.com>
29601 Date: Mon Mar 26 12:03:36 2007 +0200
29603 PXA: pxa27x USB OHCI support
29605 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
29607 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
29608 Author: Markus Klotzbuecher <mk@denx.de>
29609 Date: Mon Mar 26 11:21:05 2007 +0200
29611 USB: remove the S3C24X0_merge #define, which was introduced while
29612 merging OHCI drivers.
29614 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29616 commit 1798049522f594013aea29457d46794298c6ae15
29617 Author: Michal Simek <root@monstr.eu>
29618 Date: Mon Mar 26 01:39:07 2007 +0200
29620 Support for XUPV2P board
29622 BSP autoconfig support
29624 commit 0d974d5297349504a2ddfa09314be573b5df320a
29625 Author: Stefan Roese <sr@denx.de>
29626 Date: Sat Mar 24 15:57:09 2007 +0100
29628 [PATCH] Add 4xx GPIO functions
29630 This patch adds some 4xx GPIO functions. It also moves some of the
29631 common code and defines into a common 4xx GPIO header file.
29633 Signed-off-by: Stefan Roese <sr@denx.de>
29635 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
29636 Author: Stefan Roese <sr@denx.de>
29637 Date: Sat Mar 24 15:55:58 2007 +0100
29639 [PATCH] Small Sequoia cleanup
29641 Signed-off-by: Stefan Roese <sr@denx.de>
29643 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
29644 Author: Stefan Roese <sr@denx.de>
29645 Date: Sat Mar 24 15:45:34 2007 +0100
29647 [PATCH] Clean up 40EZ/Acadia support
29649 This patch cleans up all the open issue of the preliminary
29652 Signed-off-by: Stefan Roese <sr@denx.de>
29654 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
29655 Author: Jon Loeliger <jdl@freescale.com>
29656 Date: Tue Dec 12 11:02:20 2006 -0600
29658 Fix 8641HPCN problem with ld version 2.16
29660 (Dot outside sections problem).
29662 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
29664 Signed-off-by: Jon Loeliger <jdl@freescale.com>
29666 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
29667 Author: Haiying Wang <haiying.wang@freescale.com>
29668 Date: Thu Dec 7 10:35:55 2006 -0600
29670 Set Rev 2.x 86xx PIC in mixed mode.
29672 Prevent false interrupt from hanging Linux as MSR[EE] is set
29673 to enable interrupts by changing the PIC out of the default
29674 pass through mode into mixed mode.
29676 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
29677 Signed-off-by: Jon Loeliger <jdl@freescale.com>
29679 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
29680 Author: Jason Jin <jason.jin@freescale.com>
29681 Date: Thu Dec 7 10:32:35 2006 -0600
29683 Add flash cmd function to 8641HPCN ramboot
29685 Also fixes some commmand for 8641 HPCN ramboot case.
29687 Signed-off-by: Jason Jin <jason.jin@freescale.com>
29688 Signed-off-by: Jon Loeliger <jdl@freescale.com>
29690 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
29691 Author: Ed Swarthout <ed.swarthout@freescale.com>
29692 Date: Thu Dec 7 10:34:14 2006 -0600
29694 Add support for 8641 Rev 2 silicon.
29696 Without this patch, I am unable to get to the prompt on rev 2 silicon.
29697 Only set ddrioovcr for rev1.
29699 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
29700 Signed-off-by: Jon Loeliger <jdl@freescale.com>
29702 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
29703 Author: Wolfgang Denk <wd@denx.de>
29704 Date: Thu Mar 22 00:13:12 2007 +0100
29706 Code cleanup / re-insert previous Copyright entries.
29708 Signed-off-by: Wolfgang Denk <wd@denx.de>
29710 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
29711 Author: Wolfgang Denk <wd@denx.de>
29712 Date: Wed Mar 21 23:26:15 2007 +0100
29714 Code cleanup. Update CHANGELOG
29716 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
29717 Author: Stefan Roese <sr@denx.de>
29718 Date: Wed Mar 21 14:54:29 2007 +0100
29720 ppc4xx: Fix file mode of include/configs/acadia.h
29722 Signed-off-by: Stefan Roese <sr@denx.de>
29724 commit d5f4614c9350d9333e575100fb250aab774d0258
29725 Author: Markus Klotzbuecher <mk@denx.de>
29726 Date: Wed Mar 21 14:41:46 2007 +0100
29728 SPC1920: fix small clock routing bug
29730 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29732 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
29733 Author: Stefan Roese <sr@denx.de>
29734 Date: Wed Mar 21 13:39:57 2007 +0100
29736 [PATCH] Add AMCC Acadia (405EZ) eval board support
29738 This patch adds support for the new AMCC Acadia eval board.
29740 Please note that this Acadia/405EZ support is still in a beta stage.
29741 Still lot's of cleanup needed but we need a preliminary release now.
29743 Signed-off-by: Stefan Roese <sr@denx.de>
29745 commit e01bd218b00af73499331a1a701625a852cd286f
29746 Author: Stefan Roese <sr@denx.de>
29747 Date: Wed Mar 21 13:38:59 2007 +0100
29749 [PATCH] Add AMCC PPC405EZ support
29751 This patch adds support for the new AMCC 405EZ PPC. It is in
29752 preparation for the AMCC Acadia board support.
29754 Please note that this Acadia/405EZ support is still in a beta stage.
29755 Still lot's of cleanup needed but we need a preliminary release now.
29757 Signed-off-by: Stefan Roese <sr@denx.de>
29759 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
29760 Author: Heiko Schocher <hs@pollux.denx.de>
29761 Date: Wed Mar 21 08:45:17 2007 +0100
29763 [PATCH] TQM8272: dont change the bits given from the HRCW
29764 for the SIUMCR and BCR Register.
29765 Fix the calculation for the EEprom Size
29767 Signed-off-by: Heiko Schocher <hs@denx.de>
29769 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
29770 Author: Aubrey Li <aubrey.adi@gmail.com>
29771 Date: Tue Mar 20 18:16:24 2007 +0800
29773 [Blackfin][PATCH] Add BF561 EZKIT board support
29775 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
29776 Author: Aubrey Li <aubrey.adi@gmail.com>
29777 Date: Mon Mar 19 22:55:58 2007 +0800
29779 [Blackfin][PATCH] minor cleanup
29781 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
29782 Author: Wolfgang Denk <wd@denx.de>
29783 Date: Mon Mar 19 13:10:08 2007 +0100
29785 Remove obsoleted POST files.
29787 Signed-off-by: Wolfgang Denk <wd@denx.de>
29789 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
29790 Author: Aubrey Li <aubrey.adi@gmail.com>
29791 Date: Mon Mar 19 01:26:11 2007 +0800
29793 [PATCH] Add flash chip M29W320ET/B support
29795 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
29796 Author: Aubrey Li <aubrey.adi@gmail.com>
29797 Date: Mon Mar 19 01:24:52 2007 +0800
29799 [Blackfin][PATCH] Add BF537 stamp board support
29801 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
29802 Author: Stefan Roese <sr@denx.de>
29803 Date: Fri Mar 16 21:11:42 2007 +0100
29805 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
29807 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
29808 DDR memory are dynamically programmed matching the total size
29809 of the equipped memory (DIMM modules).
29811 Signed-off-by: Stefan Roese <sr@denx.de>
29813 commit 76d1466f918b881cda2d259254761e73885093c2
29814 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29815 Date: Tue Mar 13 13:38:05 2007 +0100
29817 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
29818 boards in terms of unification.
29820 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29822 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
29823 Author: Wolfgang Denk <wd@denx.de>
29824 Date: Tue Mar 13 16:05:55 2007 +0100
29826 Make SC3 board build with 'make O='; use 'addcons' consistently
29827 (SC3 and Jupiter used to use 'addcon' instead).
29829 Signed-off-by: Wolfgang Denk wd@denx.de
29831 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
29832 Author: Heiko Schocher <hs@pollux.denx.de>
29833 Date: Tue Mar 13 09:40:59 2007 +0100
29835 [PATCH] update board config for jupiter Board:
29837 CONFIG_CMDLINE_EDITING,
29838 CFG_ENV_ADDR_REDUND activated
29840 Signed-off-by: Heiko Schocher <hs@denx.de>
29842 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
29843 Author: Aubrey Li <aubrey.adi@gmail.com>
29844 Date: Mon Mar 12 12:11:55 2007 +0800
29846 [Blackfin][PATCH] minor cleanup
29848 commit bfa5754a58477ac917d21527cd0f079d87cf188e
29849 Author: Aubrey Li <aubrey.adi@gmail.com>
29850 Date: Mon Mar 12 01:42:06 2007 +0800
29852 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
29854 commit 8440bb14581a294375c34b91b42512f9753d1130
29855 Author: Aubrey Li <aubrey.adi@gmail.com>
29856 Date: Mon Mar 12 00:25:14 2007 +0800
29858 [Blackfin][PATCH] code cleanup
29860 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
29861 Author: Michal Simek <monstr@monstr.eu>
29862 Date: Sun Mar 11 13:48:24 2007 +0100
29864 [Microblaze][PATCH] part 2
29866 interrupt controller support
29870 board information support
29872 booting image support
29874 adding support for Xilinx ML401
29876 commit 76316a318de91f6184e7c22a10e02d275ade2441
29877 Author: Michal Simek <monstr@monstr.eu>
29878 Date: Sun Mar 11 13:42:58 2007 +0100
29880 [Microblaze][PATCH]
29882 interrupt controller support
29886 board information support
29888 booting image support
29890 adding support for Xilinx ML401
29892 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
29893 Author: Aubrey Li <aubrey.adi@gmail.com>
29894 Date: Sat Mar 10 23:49:29 2007 +0800
29896 [Blackfin][PATCH] code cleanup
29898 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
29899 Author: Aubrey.Li <aubrey.adi@gmail.com>
29900 Date: Fri Mar 9 13:40:56 2007 +0800
29902 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
29904 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
29905 Author: Aubrey.Li <aubrey.adi@gmail.com>
29906 Date: Fri Mar 9 13:38:44 2007 +0800
29908 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
29910 commit 992423ab43c2bcf6b704853bd00af77450915e20
29911 Author: Stefan Roese <sr@denx.de>
29912 Date: Thu Mar 8 23:00:08 2007 +0100
29914 ppc4xx: Fix file mode of sequoia.c
29916 Signed-off-by: Stefan Roese <sr@denx.de>
29918 commit eb92f613556800f7483666db09d9a237ad911d4a
29919 Author: Wolfgang Denk <wd@pollux.denx.de>
29920 Date: Thu Mar 8 22:52:51 2007 +0100
29924 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
29925 Author: John Otken john@softadvances.com <john@softadvances.com>
29926 Date: Thu Mar 8 09:39:48 2007 -0600
29928 ppc4xx: Clear Sequoia/Rainier security engine reset bits
29930 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
29932 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
29933 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29934 Date: Thu Mar 8 16:26:52 2007 +0100
29936 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
29938 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29940 commit d9fc703246840c4b268debf48c334ba55c597dc0
29941 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29942 Date: Thu Mar 8 16:25:47 2007 +0100
29944 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
29946 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29948 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
29949 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29950 Date: Thu Mar 8 16:23:11 2007 +0100
29952 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
29954 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29956 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
29957 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29958 Date: Thu Mar 8 16:20:32 2007 +0100
29960 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
29962 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29964 commit f9fc6a5852a6335840882fa2111925010eea1abe
29965 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29966 Date: Wed Mar 7 15:32:01 2007 +0100
29968 fixed ethernet phy configuration for plu405 board
29970 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
29972 commit 769104c9356594deb2092e204a39c05b33202d6c
29973 Author: Wolfgang Denk <wd@pollux.denx.de>
29974 Date: Thu Mar 8 21:49:27 2007 +0100
29978 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
29979 Author: Stefan Roese <sr@denx.de>
29980 Date: Thu Mar 8 10:13:16 2007 +0100
29982 [PATCH] Update AMCC Luan 440SP eval board support
29984 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
29985 inititializition. This includes DDR auto calibration and support
29986 for different DIMM modules, instead of the fixed setup used in
29987 the earlier version.
29989 This patch also enables the cache in FLASH for the startup
29990 phase of U-Boot (while running from FLASH). After relocating to
29991 SDRAM the cache is disabled again. This will speed up the boot
29992 process, especially the SDRAM setup, since there are some loops
29993 for memory testing (auto calibration).
29995 Signed-off-by: Stefan Roese <sr@denx.de>
29997 commit 2f5df47351910a2936c7741cf111855829200943
29998 Author: Stefan Roese <sr@denx.de>
29999 Date: Thu Mar 8 10:10:18 2007 +0100
30001 [PATCH] Update AMCC Yucca 440SPe eval board support
30003 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
30004 inititializition. This includes DDR auto calibration and support
30005 for different DIMM modules, instead of the fixed setup used in
30006 the earlier version.
30008 Signed-off-by: Stefan Roese <sr@denx.de>
30010 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
30011 Author: Stefan Roese <sr@denx.de>
30012 Date: Thu Mar 8 10:07:18 2007 +0100
30014 ppc4xx: Small AMCC Katmai 440SPe update
30016 Signed-off-by: Stefan Roese <sr@denx.de>
30018 commit df294497479b1dca6dd86318b2a912f72fede0df
30019 Author: Stefan Roese <sr@denx.de>
30020 Date: Thu Mar 8 10:06:09 2007 +0100
30022 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
30024 Signed-off-by: Stefan Roese <sr@denx.de>
30026 commit 83853178bd36bca6f0f8f1331476620c84a587fc
30027 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
30028 Date: Wed Mar 7 12:14:50 2007 -0600
30030 net - Support ping reply when processing net-loop
30032 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
30034 This permits the ping command to test the phy interface when the phy
30035 is put in loopback mode (typically by setting register 0 bit 14).
30037 It also allows the port to respond to an external ping when u-boot is
30038 processing some other net command (such as tftp). This is useful when
30039 tftp appears to hang.
30041 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30042 Signed-off-by: Ben Warren <bwarren@qstreams.com>
30044 commit fa1aef15bcd47736687be1af544506e90fba545d
30045 Author: Stefan Roese <sr@denx.de>
30046 Date: Wed Mar 7 16:43:00 2007 +0100
30048 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
30050 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
30051 DDR memory are dynamically programmed matching the total size
30052 of the equipped memory (DIMM modules).
30054 Signed-off-by: Stefan Roese <sr@denx.de>
30056 commit e2ebe696818939e2b974628be9c921ea3fe9de13
30057 Author: Stefan Roese <sr@denx.de>
30058 Date: Wed Mar 7 16:39:36 2007 +0100
30060 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
30062 This patch fixes a problem that occurs when 2 DIMM's are
30063 used. This problem was first spotted and fixed by Gerald Jackson
30064 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
30065 problem in a little more clever way.
30067 This patch also adds the nice functionality to dynamically
30068 create the TLB entries for the SDRAM (tlb.c). So we should
30069 never run into such problems with wrong (too short) TLB
30070 initialization again on these platforms.
30072 As this feature is new to the "old" 44x SPD DDR driver, it
30073 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
30075 Signed-off-by: Stefan Roese <sr@denx.de>
30077 commit 39218433983417b9df087976a79e3f80dd5e83d6
30078 Author: Wolfgang Denk <wd@denx.de>
30079 Date: Wed Mar 7 16:33:44 2007 +0100
30081 UC101: fix compiler warnings
30083 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
30084 Author: Wolfgang Denk <wd@pollux.denx.de>
30085 Date: Wed Mar 7 16:19:46 2007 +0100
30087 HMI1001: fix build error, cleanup compiler warnings.
30089 commit ad5bb451ade552c44bef9119d907929ebc2c126f
30090 Author: Wolfgang Denk <wd@pollux.denx.de>
30091 Date: Tue Mar 6 18:08:43 2007 +0100
30093 Restructure POST directory to support of other CPUs, boards, etc.
30095 commit a5284efd125967675b2e9c6ef7b95832268ad360
30096 Author: Wolfgang Denk <wd@pollux.denx.de>
30097 Date: Tue Mar 6 18:01:47 2007 +0100
30099 Fix HOSTARCH handling.
30100 Patch by Mike Frysinger, Mar 05 2007
30102 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
30103 Author: Stefan Roese <sr@denx.de>
30104 Date: Tue Mar 6 07:47:04 2007 +0100
30106 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
30108 As provided by the AMCC applications team, this patch optimizes the
30109 DDR2 setup for 166MHz bus speed. The values provided are also save
30110 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
30111 setup has to be adjusted as done in this patch.
30113 For this the NAND booting version had to include the "speed.c" file
30114 from the cpu/ppc4xx directory. With this addition the NAND SPL image
30115 will just fit into the 4kbytes of program space. gcc version 4.x as
30116 provided with ELDK 4.x is needed to generate this optimized code.
30118 Signed-off-by: Stefan Roese <sr@denx.de>
30120 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
30121 Author: Wolfgang Denk <wd@pollux.denx.de>
30122 Date: Sun Mar 4 01:36:05 2007 +0100
30126 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
30127 Author: Kim Phillips <kim.phillips@freescale.com>
30128 Date: Wed Feb 28 00:02:04 2007 -0600
30130 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
30132 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
30134 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
30135 Author: Kumar Gala <galak@kernel.crashing.org>
30136 Date: Tue Feb 27 23:51:42 2007 -0600
30138 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
30140 The config value for:
30148 Were not being used when setting the appropriate register
30151 * CFG_SCCR_USBMPHCM
30156 To allow full config of the SCCR.
30158 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
30159 that were just bogus.
30161 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30163 commit d51b3cf371cd441030460ef19d36b2924c361b1a
30164 Author: Kim Phillips <kim.phillips@freescale.com>
30165 Date: Thu Feb 22 20:06:57 2007 -0600
30167 mpc83xx: update [local-]mac-address properties on UEC based devices
30169 8360 and 832x weren't updating their [local-]mac-address
30170 properties. This patch fixes that.
30172 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30174 commit 61f4f912acbe60776c5e00df1ec94094ce672957
30175 Author: Timur Tabi <timur@freescale.com>
30176 Date: Tue Feb 13 10:41:42 2007 -0600
30178 mpc83xx: write MAC address to mac-address and local-mac-address
30180 Some device trees have a mac-address property, some have local-mac-address,
30181 and some have both. To support all of these device trees, this patch
30182 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
30183 This function already updates local-mac-address.
30185 Signed-off-by: Timur Tabi <timur@freescale.com>
30187 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
30188 Author: Kim Phillips <kim.phillips@freescale.com>
30189 Date: Tue Feb 27 18:41:08 2007 -0600
30191 mpc83xx: add command line editing by default
30193 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
30194 Author: Kim Phillips <kim.phillips@freescale.com>
30195 Date: Wed Feb 14 19:50:53 2007 -0600
30197 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
30199 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
30200 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
30202 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
30204 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30205 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
30207 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
30208 Author: Xie Xiaobo <r63061@freescale.com>
30209 Date: Wed Feb 14 18:27:17 2007 +0800
30211 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
30213 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
30214 it pass DDR/DDR2 compliance tests.
30216 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
30218 commit b110f40bd180c6b560276589beedf753e97c46ce
30219 Author: Xie Xiaobo <r63061@freescale.com>
30220 Date: Wed Feb 14 18:27:06 2007 +0800
30222 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
30224 MPC8360E rev2.0 have new spridr,and PVR value,
30225 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
30227 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
30229 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
30230 Author: Xie Xiaobo <r63061@freescale.com>
30231 Date: Wed Feb 14 18:26:44 2007 +0800
30233 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
30235 MPC8349E rev3.1 have new spridr,and PVR value,
30236 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
30238 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
30240 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
30241 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
30242 Date: Wed Jan 31 11:04:19 2007 +0100
30244 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
30246 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
30247 which is used to se if an slave will ACK after receiving its address.
30249 Correct i2c probing to use this method as the old method could upset
30250 a slave as it wrote a data byte to it.
30252 Add a small delay in i2c_init() to let the controller
30253 shutdown any ongoing I2C activity.
30255 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
30257 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
30258 Author: Timur Tabi <timur@freescale.com>
30259 Date: Wed Jan 31 15:54:29 2007 -0600
30261 mpc83xx: Add support for the MPC8349E-mITX-GP
30263 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
30264 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
30265 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
30267 Signed-off-by: Timur Tabi <timur@freescale.com>
30269 commit fab16807adad350f618024350c6950165c247c72
30270 Author: Timur Tabi <timur@freescale.com>
30271 Date: Wed Jan 31 15:54:20 2007 -0600
30273 mpc83xx: Delete sdram_init() for MPC8349E-mITX
30275 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
30276 never does anything. This patch deletes it.
30278 Signed-off-by: Timur Tabi <timur@freescale.com>
30280 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
30281 Author: Dave Liu <daveliu@freescale.com>
30282 Date: Fri Jan 19 10:43:26 2007 +0800
30284 mpc83xx: Fix the LAW1/3 bug
30286 The patch solves the alignment problem of the local bus access windows to
30287 render accessible the memory bank and PHY registers of UPC 1 (starting at
30288 0xf801 0000). What we actually did was to adjust the sizes of the bus
30289 access windows so that the base address alignment requirement would be met.
30291 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
30292 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
30293 Signed-off-by: Dave Liu <daveliu@freescale.com>
30295 commit 97c4b397dce236a7318b304667bf89e59d08b17c
30296 Author: Kim Phillips <kim.phillips@freescale.com>
30297 Date: Tue Jan 30 16:15:31 2007 -0600
30299 mpc83xx: don't hang if watchdog configured on 8360, 832x
30301 don't hang if watchdog configured on 8360, 832x
30303 The watchdog programming model is the same across all 83xx devices;
30304 make the code reflect that.
30306 commit b70047478570e371ce7223be342ce98afea0f7d6
30307 Author: Kim Phillips <kim.phillips@freescale.com>
30308 Date: Tue Jan 30 16:15:21 2007 -0600
30310 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
30312 protect memcpy to bad address if a local-mac-address is missing from dt
30314 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
30315 Author: Kim Phillips <kim.phillips@freescale.com>
30316 Date: Tue Jan 30 16:15:04 2007 -0600
30318 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
30320 make 8360 default environment fdt be 8360 (not 8349)
30322 commit a28899c910024a0226331df07207b1038c300c93
30323 Author: Emilian Medve <Emilian.Medve@freescale.com>
30324 Date: Tue Jan 30 16:14:50 2007 -0600
30326 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
30328 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
30329 be used for busy-waiting since it strips the 'volatile' property from
30330 the bd variable. gcc3 was working by pure luck.
30332 This is a follow on patch to "Fix the UEC driver bug of QE"
30334 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
30335 Author: Kumar Gala <galak@kernel.crashing.org>
30336 Date: Tue Jan 30 14:08:30 2007 -0600
30338 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
30340 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
30341 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
30342 CONFIG_MPC834X so they are more generic.
30344 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30346 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
30347 Author: Kim Phillips <kim.phillips@freescale.com>
30348 Date: Thu Jan 25 13:40:55 2007 -0600
30350 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
30352 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
30353 Author: Kim Phillips <kim.phillips@freescale.com>
30354 Date: Wed Jan 24 17:18:37 2007 -0600
30356 mpc83xx: sort Makefile targets
30358 reordered targets alphabetically
30360 commit 91e25769771c1164ed63ffca0add49f934ae3343
30361 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
30362 Date: Tue Jan 16 11:38:14 2007 -0500
30364 mpc83xx: U-Boot support for Wind River SBC8349
30366 I've redone the SBC8349 support to match git-current, which
30367 incorporates all the MPC834x updates from Freescale since the 1.1.6
30368 release, including the DDR changes.
30370 I've kept all the SBC8349 files as parallel as possible to the
30371 MPC8349EMDS ones for ease of maintenance and to allow for easy
30372 inspection of what was changed to support this board. Hence the SBC8349
30373 U-Boot has FDT support and everything else that the MPC8349EMDS has.
30375 Fortunately the Freescale updates added support for boards using CS0,
30376 but I had to change spd_sdram.c to allow for board specific settings for
30377 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
30378 default if the board doesn't specify a value.)
30380 Hopefully this should be mergeable as-is and require no whitespace
30381 cleanups or similar, but if something doesn't measure up then let me
30382 know and I'll fix it.
30387 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
30388 Author: Sam Song <samsongshu@yahoo.com.cn>
30389 Date: Thu Dec 14 19:03:21 2006 +0800
30391 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
30393 A redundant semicolon existed in mpc8349itx.c
30396 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
30398 commit f35f358241c549be3f75cfe2eaa642914275b7ba
30399 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
30400 Date: Wed Dec 6 21:23:55 2006 -0500
30402 mpc83xx: Put the version (and magic) after the HRCW.
30404 Put the version (and magic) after the HRCW. This puts it in a fixed
30405 location in flash, not at the start of flash but as close as we can get.
30407 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
30409 commit 48aecd969171a6e99a55fae04933857787f9a5bd
30410 Author: Dave Liu <r63238@freescale.com>
30411 Date: Thu Dec 7 21:14:51 2006 +0800
30413 mpc83xx: Add the MPC832XEMDS board readme
30415 Add the MPC832XEMDS board readme
30417 Signed-off-by: Dave Liu <daveliu@freescale.com>
30419 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
30420 Author: Dave Liu <r63238@freescale.com>
30421 Date: Thu Dec 7 21:13:15 2006 +0800
30423 mpc83xx: Add support for the MPC832XEMDS board
30425 This patch supports DUART, ETH3/4 and PCI etc.
30427 Signed-off-by: Dave Liu <daveliu@freescale.com>
30429 commit e080313c32322e15ab5a18eb896a252858c57284
30430 Author: Dave Liu <r63238@freescale.com>
30431 Date: Thu Dec 7 21:11:58 2006 +0800
30433 mpc83xx: streamline the 83xx immr head file
30435 For better format and style, I streamlined the 83xx head files,
30436 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
30437 duplicated macro definition appear in the both files; 2) the structure
30438 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
30439 macro definition put inside the each structure. So, I cleaned up the
30440 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
30441 moved the macro definition to mpc83xx.h, Just like MPC8260.
30445 *streamline the 83xx immr head file
30447 Signed-off-by: Dave Liu <daveliu@freescale.com>
30449 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
30450 Author: Dave Liu <r63238@freescale.com>
30451 Date: Wed Dec 6 11:38:17 2006 +0800
30453 mpc83xx: Fix the UEC driver bug of QE
30455 The patch prevents the GCC tool chain from striping useful code for
30456 optimization. It will make UEC ethernet driver workable, Otherwise the
30457 UEC will fail in tx when you are using gcc4.x. but the driver can work
30458 when using gcc3.4.3.
30462 *Prevent the GCC from striping code for optimization, Otherwise the UEC
30463 will tx failed when you are using gcc4.x.
30465 Signed-off-by: Dave Liu <daveliu@freescale.com>
30467 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
30468 Author: Stefan Roese <sr@denx.de>
30469 Date: Thu Mar 1 21:11:36 2007 +0100
30471 [PATCH] Update AMCC Katmai 440SPe eval board support
30473 This patch updates the recently added Katmai board support. The biggest
30474 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
30477 Please note, that still some problems are left with some memory
30478 configurations. See the driver for more details.
30480 Signed-off-by: Stefan Roese <sr@denx.de>
30482 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
30483 Author: Stefan Roese <sr@denx.de>
30484 Date: Thu Mar 1 07:03:25 2007 +0100
30486 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
30488 Signed-off-by: Stefan Roese <sr@denx.de>
30490 commit ccbc7036648e465697ca298ba51e0e76dda352a0
30491 Author: Wolfgang Denk <wd@pollux.denx.de>
30492 Date: Wed Feb 28 01:28:53 2007 +0100
30494 SC3: fix typo in default environment
30496 commit e344568b1b46af85ec32d815586f91bc115d6223
30497 Author: Sergei Poselenov <sposelenov@emcraft.com>
30498 Date: Tue Feb 27 20:15:30 2007 +0300
30500 MCC200: Fixes for update procedure
30502 - fix logic error in image type handling
30503 - make sure file system images (cramfs etc.) get stored in flash
30504 with image header stripped so they can be mounted through MTD
30506 commit 743571145b37182757d4e688a77860b36ee77573
30507 Author: Wolfgang Denk <wd@pollux.denx.de>
30508 Date: Tue Feb 27 14:26:04 2007 +0100
30510 Minor code cleanup.
30512 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
30513 Author: Sergei Poselenov <sposelenov@emcraft.com>
30514 Date: Tue Feb 27 12:40:16 2007 +0300
30516 MCC200 update - add LCD Progress Indicator
30518 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
30519 Author: Stefan Roese <sr@denx.de>
30520 Date: Thu Feb 22 07:43:34 2007 +0100
30522 [PATCH] get_dev() now unconditionally uses manual relocation
30524 Since the relocation fix is not included yet and we're not sure how
30525 it will be added, this patch removes code that required relocation
30526 to be fixed for now.
30528 Signed-off-by: Stefan Roese <sr@denx.de>
30530 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
30531 Author: Stefan Roese <sr@denx.de>
30532 Date: Thu Feb 22 07:40:23 2007 +0100
30534 [PATCH] Change systemace driver to select 8 & 16bit mode
30536 As suggested by Grant Likely this patch enables the Xilinx SystemACE
30537 driver to select 8 or 16bit mode upon startup.
30539 Signed-off-by: Stefan Roese <sr@denx.de>
30541 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
30542 Author: Haiying Wang <Haiying.Wang@freescale.com>
30543 Date: Wed Feb 21 16:52:31 2007 +0100
30545 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
30547 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
30548 is fully finished. The sync() is defined in each CPU's io.h file. For
30549 those CPUs which do not need sync for now, a dummy sync() is defined in
30550 their io.h as well.
30552 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
30554 commit da04995c7dc6772013a9a0dc5c767f190c402478
30555 Author: Stefan Roese <sr@denx.de>
30556 Date: Wed Feb 21 13:44:34 2007 +0100
30558 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
30560 Signed-off-by: Stefan Roese <sr@denx.de>
30562 commit 751bb57107d78978ae08e697c3deba816f5be091
30563 Author: Stefan Roese <sr@denx.de>
30564 Date: Tue Feb 20 13:21:57 2007 +0100
30566 [PATCH] Fix relocation problem with "new" get_dev() function
30568 This patch enables the "new" get_dev() function for block devices
30569 introduced by Grant Likely to be used on systems that still suffer
30570 from the relocation problems (manual relocation neede because of
30571 problems with linker script).
30573 Hopefully we can resolve this relocation issue soon for all platform
30574 so we don't need this additional code anymore.
30576 Signed-off-by: Stefan Roese <sr@denx.de>
30578 commit d93e2212f962668b3dce091ff5edc33f2347fe37
30579 Author: Stefan Roese <sr@denx.de>
30580 Date: Tue Feb 20 13:17:42 2007 +0100
30582 [PATCH] Update SystemACE driver for 16bit access
30584 This patch removes some problems when the Xilinx SystemACE driver
30585 is used with 16bit access on an big endian platform (like the
30588 Signed-off-by: Stefan Roese <sr@denx.de>
30590 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
30591 Author: Stefan Roese <sr@denx.de>
30592 Date: Tue Feb 20 13:15:40 2007 +0100
30594 [PATCH] Clean up Katmai (440SPe) linker script
30596 Signed-off-by: Stefan Roese <sr@denx.de>
30598 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
30599 Author: Stefan Roese <sr@denx.de>
30600 Date: Tue Feb 20 10:57:08 2007 +0100
30602 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
30604 Signed-off-by: Stefan Roese <sr@denx.de>
30606 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
30607 Author: Stefan Roese <sr@denx.de>
30608 Date: Tue Feb 20 10:51:26 2007 +0100
30610 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
30612 This patch switches to the desired I2C bus when the date/dtt
30613 commands are called. This can be configured using the
30614 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
30616 Signed-off-by: Stefan Roese <sr@denx.de>
30618 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
30619 Author: Stefan Roese <sr@denx.de>
30620 Date: Tue Feb 20 10:43:34 2007 +0100
30622 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
30624 This patch adds support for the DDR2 controller used on the
30625 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
30626 board and works fine with the following DIMM modules:
30628 - Corsair CM2X512-5400C4 (512MByte per DIMM)
30629 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
30630 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
30632 This patch also adds the nice functionality to dynamically
30633 create the TLB entries for the SDRAM (tlb.c). So we should
30634 never run into such problems with wrong (too short) TLB
30635 initialization again on these platforms.
30637 Signed-off-by: Stefan Roese <sr@denx.de>
30639 commit 36d830c9830379045f5daa9f542ac1c990c70068
30640 Author: Stefan Roese <sr@denx.de>
30641 Date: Tue Feb 20 10:35:42 2007 +0100
30643 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
30645 Since the existing 4xx SPD SDRAM initialization routines for the
30646 405 SDRAM controller and the 440 DDR controller don't have much in
30647 common this patch splits both drivers into different files.
30649 This is in preparation for the 440 DDR2 controller support (440SP/e).
30651 Signed-off-by: Stefan Roese <sr@denx.de>
30653 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
30654 Author: Stefan Roese <sr@denx.de>
30655 Date: Tue Feb 20 10:27:08 2007 +0100
30657 [PATCH] PPC4xx: Add support for multiple I2C busses
30659 This patch adds support for multiple I2C busses on the PPC4xx
30660 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
30661 to make use of this feature.
30663 It also merges the 405 and 440 i2c header files into one common
30666 Also the 4xx i2c reset procedure is reworked since I experienced
30667 some problems with the first access on the 440SPe Katmai board.
30669 Signed-off-by: Stefan Roese <sr@denx.de>
30671 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
30672 Author: Grant Likely <grant.likely@secretlab.ca>
30673 Date: Tue Feb 20 09:05:45 2007 +0100
30675 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
30677 Block device read/write is anonymous data; there is no need to use a
30678 typed pointer. void * is fine. Also add a hook for block_read functions
30680 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30682 commit 53758fa20e935cc87eeb0519ed365df753a6f289
30683 Author: Grant Likely <grant.likely@secretlab.ca>
30684 Date: Tue Feb 20 09:05:38 2007 +0100
30686 [PATCH 8_9] Add block_write hook to block_dev_desc_t
30688 Preparation for future patches which support block device writing
30690 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30692 commit f4852ebe6ca946a509667eb68be42026f837be76
30693 Author: Grant Likely <grant.likely@secretlab.ca>
30694 Date: Tue Feb 20 09:05:31 2007 +0100
30696 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
30698 Register read/write does not need to be wrapped in a full function. The
30699 patch replaces them with macros.
30701 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30703 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
30704 Author: Grant Likely <grant.likely@secretlab.ca>
30705 Date: Tue Feb 20 09:05:23 2007 +0100
30707 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
30709 The code in this file is not a command; it is a device driver. Put it in
30710 the correct place. There are zero functional changes in this patch, it
30711 only moves the file.
30713 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30715 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
30716 Author: Grant Likely <grant.likely@secretlab.ca>
30717 Date: Tue Feb 20 09:05:16 2007 +0100
30719 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
30721 This patch is in preparation of additional changes to the sysace driver.
30722 May as well take this opportunity to fixup the inconsistent whitespace since
30723 this file is about to undergo major changes anyway.
30725 There are zero functional changes in this patch. It only cleans up the
30728 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30730 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
30731 Author: Grant Likely <grant.likely@secretlab.ca>
30732 Date: Tue Feb 20 09:05:07 2007 +0100
30734 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
30736 isprint is already defined in ctype.c
30738 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30740 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
30741 Author: Grant Likely <grant.likely@secretlab.ca>
30742 Date: Tue Feb 20 09:05:00 2007 +0100
30744 [PATCH 3_9] Move buffer print code from md command to common function
30746 Printing a buffer is a darn useful thing. Move the buffer print code
30747 into print_buffer() in lib_generic/
30749 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30751 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
30752 Author: Grant Likely <grant.likely@secretlab.ca>
30753 Date: Tue Feb 20 09:04:52 2007 +0100
30755 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
30757 Change the xilinx device drivers and board code to include config.h
30758 instead of xparameters.h directly. config.h always includes the
30759 correct xparameters file. This change reduces the posibility of
30760 including the wrong file when adding a new xilinx board port
30762 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30764 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
30765 Author: Grant Likely <grant.likely@secretlab.ca>
30766 Date: Tue Feb 20 09:04:34 2007 +0100
30768 [PATCH 1_4] Merge common get_dev() routines for block devices
30770 Each of the filesystem drivers duplicate the get_dev routine. This change
30771 merges them into a single function in part.c
30773 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30775 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
30776 Author: Wolfgang Denk <wd@pollux.denx.de>
30777 Date: Mon Feb 19 23:09:51 2007 +0100
30779 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
30780 as root file system images.
30782 commit 489c696ae7211218961d159e43e722d74c36fcbc
30783 Author: Sergei Poselenov <sposelenov@emcraft.com>
30784 Date: Wed Feb 14 14:30:28 2007 +0300
30786 MCC200: Extensions to Software Update Mechanism
30788 Update / extend Software Update Mechanism for MCC200 board:
30790 - Add support for rootfs image added. The environment variables
30791 "rootfs_st" and "rootfs_nd" can be used to override the default
30792 values of the image start and end.
30793 - Remove excessive key check code.
30796 commit 4be23a12f23f1372634edc3215137b09768b7949
30797 Author: Stefan Roese <sr@denx.de>
30798 Date: Mon Feb 19 08:23:15 2007 +0100
30800 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
30802 As spotted by Matthias Fuchs, the READY input should not be
30803 enabled for the NOR FLASH on the Sequoia board.
30805 Signed-off-by: Stefan Roese <sr@denx.de>
30807 commit 2605e90bf676d48123afe5719a846d2b52b24aac
30808 Author: Heiko Schocher <hs@pollux.denx.de>
30809 Date: Fri Feb 16 07:57:42 2007 +0100
30811 [PATCH] Added support for the jupiter board.
30813 Signed-off-by: Heiko Schocher <hs@denx.de>
30815 commit 497d012e5be0194e1084073d0081eb1a844796b2
30816 Author: Gary Jennejohn <garyj@pollux.denx.de>
30817 Date: Mon Feb 12 13:11:50 2007 +0100
30819 LPC2292: patch from Siemens.
30821 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
30822 Author: Stefan Roese <sr@denx.de>
30823 Date: Sat Feb 10 08:49:31 2007 +0100
30825 [PATCH] Add missing p3mx.h file to repository (ups)
30827 Signed-off-by: Stefan Roese <sr@denx.de>
30829 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
30830 Author: Bartlomiej Sieka <tur@semihalf.com>
30831 Date: Fri Feb 9 10:45:42 2007 +0100
30833 [Motion-PRO] Preliminary support for the Motion-PRO board.
30835 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
30836 Author: Stefan Roese <sr@denx.de>
30837 Date: Wed Feb 7 16:51:08 2007 +0100
30839 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
30841 Some boards that can have more than 768MBytes of SDRAM need to
30842 set "initrd_high", so that the initrd can be accessed by the
30845 Signed-off-by: Stefan Roese <sr@denx.de>
30847 commit 7372ca68227930d03cffa548310524cad5b96733
30848 Author: Stefan Roese <sr@denx.de>
30849 Date: Fri Feb 2 12:44:22 2007 +0100
30851 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
30853 Previously the strapping DCR/SDR was read to determine if the internal PCI
30854 arbiter is enabled or not. This strapping bit can be overridden, so now
30855 the current status is read from the correct DCR/SDR register.
30857 Signed-off-by: Stefan Roese <sr@denx.de>
30859 commit 2aa54f651a42d198673318f07a20c89a43e4d197
30860 Author: Stefan Roese <sr@denx.de>
30861 Date: Fri Feb 2 12:42:08 2007 +0100
30863 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
30865 Signed-off-by: Stefan Roese <sr@denx.de>
30867 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
30868 Author: Stefan Roese <sr@denx.de>
30869 Date: Thu Feb 1 13:22:41 2007 +0100
30871 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
30873 When PCI PNP is enabled the pci pnp configuration routine is called
30874 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
30875 problems with some PCI cards. For now disable the PCI PNP configuration.
30877 Signed-off-by: Stefan Roese <sr@denx.de>
30879 commit 2902fadade3be7659467e8d074048c6b7068f5c0
30880 Author: Stefan Roese <sr@denx.de>
30881 Date: Wed Jan 31 16:56:10 2007 +0100
30883 [PATCH] Update 440EPx/440GRx cpu detection
30885 Signed-off-by: Stefan Roese <sr@denx.de>
30887 commit d5ea287b02a6945c3977410e364a879dd1a555c8
30888 Author: Stefan Roese <sr@denx.de>
30889 Date: Wed Jan 31 16:38:04 2007 +0100
30891 [PATCH] Update esd cpci5200 files
30893 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
30895 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
30896 Author: Stefan Roese <sr@denx.de>
30897 Date: Wed Jan 31 16:37:34 2007 +0100
30899 [PATCH] Add support for esd mecp5200 board
30901 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
30903 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
30904 Author: Stefan Roese <sr@denx.de>
30905 Date: Wed Jan 31 12:38:50 2007 +0100
30907 [PATCH] Remove unneccessary yellowstone board config file
30909 Signed-off-by: Stefan Roese <sr@denx.de>
30911 commit e802594b6fa1b166308820c276b96dc0d7cc731c
30912 Author: Stefan Roese <sr@denx.de>
30913 Date: Tue Jan 30 17:06:10 2007 +0100
30915 [PATCH] Update Sequoia (440EPx) config file
30917 The config file now handles the 2nd target, the Rainier (440GRx)
30918 evaluation board better. Additionally the PPC input clock was
30919 adjusted to match the correct value of 33.0 MHz.
30921 Signed-off-by: Stefan Roese <sr@denx.de>
30923 commit 700200c67e73b83751418abe7815840dca8fd6cb
30924 Author: Stefan Roese <sr@denx.de>
30925 Date: Tue Jan 30 17:04:19 2007 +0100
30927 [PATCH] Merge Yosemite & Yellowstone board ports
30929 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
30930 share one config file and all board specific files. This way we
30931 don't have to maintain two different sets of files for nearly
30934 Signed-off-by: Stefan Roese <sr@denx.de>
30936 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
30937 Author: Stefan Roese <sr@denx.de>
30938 Date: Tue Jan 30 15:01:49 2007 +0100
30940 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
30942 SCPU doesn't use redundant environment in flash.
30944 Signed-off-by: Stefan Roese <sr@denx.de>
30946 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
30947 Author: Stefan Roese <sr@denx.de>
30948 Date: Tue Jan 30 12:51:07 2007 +0100
30950 [PATCH] alpr: Update alpr board config file
30952 Signed-off-by: Stefan Roese <sr@denx.de>
30954 commit f8db84f132b1e335f20f96138a1f09ed97b08664
30955 Author: Wolfgang Denk <wd@pollux.denx.de>
30956 Date: Tue Jan 30 00:50:40 2007 +0100
30958 LPC2292 SODIMM port coding style cleanup.
30960 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
30961 Author: Gary Jennejohn <garyj@pollux.denx.de>
30962 Date: Wed Jan 24 12:16:56 2007 +0100
30964 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
30966 commit 2daf046ba627f85f44195815778140039636244e
30967 Author: Bartlomiej Sieka <tur@semihalf.com>
30968 Date: Tue Jan 23 17:22:06 2007 +0100
30970 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
30972 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
30973 Author: Bartlomiej Sieka <tur@semihalf.com>
30974 Date: Tue Jan 23 14:21:14 2007 +0100
30976 [iDMR] Flash driver on initialisation write-protects some sectors,
30977 currently sectors 0-3. Sector 3 does not need to be protected, though
30978 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
30979 fixes this, i.e., only sectors 0-2 are protected.
30981 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
30982 Author: Bartlomiej Sieka <tur@semihalf.com>
30983 Date: Tue Jan 23 14:11:22 2007 +0100
30985 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
30986 "mii device" results in "Unexpected exception"). Fixing this properly
30987 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
30988 this commit disables MII commads for now.
30990 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
30991 Author: Bartlomiej Sieka <tur@semihalf.com>
30992 Date: Tue Jan 23 13:25:22 2007 +0100
30994 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
30995 Identification Register (CIR).
30997 commit fdef388758506765d4d6a7155c8f1584c63ff581
30998 Author: roy zang <tie-fei.zang@freescale.com>
30999 Date: Mon Jan 22 13:19:21 2007 +0800
31001 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
31002 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
31003 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
31006 commit a4012396645533aef218354eeba754dff0deace8
31007 Author: Wolfgang Denk <wd@pollux.denx.de>
31008 Date: Fri Jan 19 23:08:39 2007 +0100
31010 Minor code cleanup.
31012 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
31013 Author: Heiko Schocher <hs@pollux.denx.de>
31014 Date: Fri Jan 19 19:57:10 2007 +0100
31016 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
31018 Signed-off-by: Heiko Schocher <hs@denx.de>
31020 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
31021 Author: Heiko Schocher <hs@pollux.denx.de>
31022 Date: Fri Jan 19 18:05:26 2007 +0100
31024 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
31025 if you must swap the bytes between reading/writing.
31026 (Needed for the SC3 board)
31028 Signed-off-by: Heiko Schocher <hs@denx.de>
31030 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
31031 Author: Stefan Roese <sr@denx.de>
31032 Date: Thu Jan 18 16:05:47 2007 +0100
31034 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
31036 Signed-off-by: Stefan Roese <sr@denx.de>
31038 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
31039 Author: Stefan Roese <sr@denx.de>
31040 Date: Thu Jan 18 11:54:52 2007 +0100
31042 [PATCH] Update Prodrive P3Mx support
31044 Signed-off-by: Stefan Roese <sr@denx.de>
31046 commit 34167a36c29ee946b727465db5c014746a08e978
31047 Author: Stefan Roese <sr@denx.de>
31048 Date: Thu Jan 18 11:48:10 2007 +0100
31050 [PATCH] Add missing Taishan config file
31052 Signed-off-by: Stefan Roese <sr@denx.de>
31054 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
31055 Author: Heiko Schocher <hs@pollux.denx.de>
31056 Date: Thu Jan 18 11:28:51 2007 +0100
31058 [PATCH] Fix: Compilerwarnings for SC3 board.
31059 The EBC Configuration Register is now by CFG_EBC_CFG definable
31060 Added JFFS2 support for the SC3 board.
31062 Signed-off-by: Heiko Schocher <hs@denx.de>
31064 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
31065 Author: Stefan Roese <sr@denx.de>
31066 Date: Thu Jan 18 10:25:34 2007 +0100
31068 [PATCH] Add support for AMCC Taishan PPC440GX eval board
31070 Signed-off-by: Stefan Roese <sr@denx.de>
31072 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
31073 Author: Wolfgang Denk <wd@pollux.denx.de>
31074 Date: Tue Jan 16 18:30:50 2007 +0100
31076 Raname solidcard3 into sc3; add redundant env for sc3
31078 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
31079 Author: Wolfgang Denk <wd@pollux.denx.de>
31080 Date: Tue Jan 16 12:46:35 2007 +0100
31082 Update default environment for Solidcard3
31084 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
31085 Author: Stefan Roese <sr@denx.de>
31086 Date: Mon Jan 15 09:46:29 2007 +0100
31088 [PATCH] Fix 440SPe rev B detection from previous patch
31090 Signed-off-by: Stefan Roese <sr@denx.de>
31092 commit a443d31410c571ee8f970da819a44d698fdd6b1f
31093 Author: Heiko Schocher <hs@pollux.denx.de>
31094 Date: Sun Jan 14 13:35:31 2007 +0100
31096 [FIX] correct I2C Writes for the LM81 Sensor.
31098 Signed-off-by: Heiko Schocher <hs@denx.de>
31100 commit 0bba5452835f19a61204edcda3a58112fd8e2208
31101 Author: Wolfgang Denk <wd@pollux.denx.de>
31102 Date: Sat Jan 13 11:17:10 2007 +0100
31104 Undo commit 3033ebb2: reset command does not take any arguments
31106 Haiying Wang's modification to the reset command was broken, undo it.
31108 Signed-off-by: Wolfgang Denk <wd@denx.de>
31110 commit 95981778cff0038fd9941044d6a3eda810e33258
31111 Author: Stefan Roese <sr@denx.de>
31112 Date: Sat Jan 13 08:01:03 2007 +0100
31114 [PATCH] Update 440SP(e) cpu revisions
31116 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
31118 Signed-off-by: Stefan Roese <sr@denx.de>
31120 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
31121 Author: Stefan Roese <sr@denx.de>
31122 Date: Sat Jan 13 07:59:56 2007 +0100
31124 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
31126 Now the board revision and the current PCI bus speed are printed after
31129 Also the EBC initialising is now done via defines in the board config
31132 Signed-off-by: Stefan Roese <sr@denx.de>
31134 commit 36adff362c2c0141ff8a810d42a7e478f779130f
31135 Author: Stefan Roese <sr@denx.de>
31136 Date: Sat Jan 13 07:59:19 2007 +0100
31138 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
31140 Now the board revision and the current PCI bus speed are printed after
31143 Also the EBC initialising is now done via defines in the board config
31146 Signed-off-by: Stefan Roese <sr@denx.de>
31148 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
31149 Author: Stefan Roese <sr@denx.de>
31150 Date: Sat Jan 13 07:57:51 2007 +0100
31152 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
31154 Now the board revision and the current PCI bus speed are printed after
31157 Signed-off-by: Stefan Roese <sr@denx.de>
31159 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
31160 Author: Heiko Schocher <hs@pollux.denx.de>
31161 Date: Thu Jan 11 15:44:44 2007 +0100
31163 Added support for the SOLIDCARD III board from Eurodesign
31165 Signed-off-by: Heiko Schocher <hs@denx.de>
31167 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
31168 Author: Reinhard Thies <Reinhard.Thies@web.de>
31169 Date: Wed Jan 10 14:41:14 2007 +0100
31171 Adjusted default environment for cam5200 board.
31173 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
31174 Author: Wolfgang Denk <wd@pollux.denx.de>
31175 Date: Wed Jan 10 15:35:52 2007 +0100
31179 commit 787fa15860a57833e50bd30555079a9cd4e519b8
31180 Author: Wolfgang Denk <wd@pollux.denx.de>
31181 Date: Wed Jan 10 01:28:39 2007 +0100
31183 Fix auto_update for MCC200 board.
31185 The invocation of do_auto_update() is moved to the end of the
31186 misc_init_r() function, after the flash mappings have been
31187 initialized. Please find attached a patch that implements that
31190 Also correct the decoding of the keypad status. With this update, the
31191 key that will trigger the update is Column 2, Row 2.
31193 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
31194 Author: Marian Balakowicz <m8@semihalf.com>
31195 Date: Wed Jan 10 00:26:15 2007 +0100
31197 CAM5200 flash driver modifications:
31198 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
31199 - add second build target 'cam5200_niosflash' which still uses custom driver
31201 commit 67fea022fa957f59653b5238c7496f80a6b70432
31202 Author: Markus Klotzbuecher <mk@denx.de>
31203 Date: Tue Jan 9 16:02:48 2007 +0100
31205 SPC1920: cleanup memory contoller setup
31207 commit 8fc2102faa23593c80381437c09f7745a14deb40
31208 Author: Markus Klotzbuecher <mk@denx.de>
31209 Date: Tue Jan 9 14:57:14 2007 +0100
31211 Fix the cpu speed setup to work with all boards.
31213 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
31214 Author: Markus Klotzbuecher <mk@denx.de>
31215 Date: Tue Jan 9 14:57:13 2007 +0100
31217 SPC1920: add support for the FM18L08 Ramtron FRAM
31219 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
31220 Author: Markus Klotzbuecher <mk@denx.de>
31221 Date: Tue Jan 9 14:57:13 2007 +0100
31223 SPC1920: update the HPI register addresses to work with the second
31224 generation of hardware
31226 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
31227 Author: Markus Klotzbuecher <mk@creamnet.de>
31228 Date: Tue Jan 9 14:57:13 2007 +0100
31230 Miscellanious spc1920 related cleanups
31232 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
31233 Author: Markus Klotzbuecher <mk@denx.de>
31234 Date: Tue Jan 9 14:57:12 2007 +0100
31236 SPC1920 GO/NOGO led should be set to color red in U-Boot
31238 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
31239 Author: Markus Klotzbuecher <mk@creamnet.de>
31240 Date: Tue Jan 9 14:57:12 2007 +0100
31242 Add support for the DS3231 RTC
31244 commit 8139567b60d678584b05f0718a681f2047c5e14f
31245 Author: Markus Klotzbuecher <mk@creamnet.de>
31246 Date: Tue Jan 9 14:57:11 2007 +0100
31248 SMC1 uses external CLK4 instead of BRG on spc1920
31250 commit d8d9de1a02fbd880b613d607143d1f57342affc7
31251 Author: Markus Klotzbuecher <mk@creamnet.de>
31252 Date: Tue Jan 9 14:57:10 2007 +0100
31254 Update the SPC1920 CMB PLD driver
31256 commit 3f34f869162750e5e999fd140f884f5de952bcfe
31257 Author: Markus Klotzbuecher <mk@creamnet.de>
31258 Date: Tue Jan 9 14:57:10 2007 +0100
31260 Add / enable I2C support on the spc1920 board
31262 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
31263 Author: Markus Klotzbuecher <mk@creamnet.de>
31264 Date: Tue Jan 9 14:57:10 2007 +0100
31266 Add support for the tms320671x host port interface (HPI)
31268 commit f4eb54529bb3664c3a562e488b460fe075f79d67
31269 Author: Wolfgang Denk <wd@pollux.denx.de>
31270 Date: Sun Jan 7 00:13:11 2007 +0100
31272 Prepare for release 1.2.0
31274 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
31275 Author: Stefan Roese <sr@denx.de>
31276 Date: Sat Jan 6 15:58:09 2007 +0100
31278 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
31280 This patch fixes a problem with an incorrect setup for the refresh
31281 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
31283 Signed-off-by: Stefan Roese <sr@denx.de>
31285 commit f16c1da9577f06c5fc08651a4065537407de4635
31286 Author: Stefan Roese <sr@denx.de>
31287 Date: Sat Jan 6 15:56:13 2007 +0100
31289 [PATCH] Update ALPR board files
31291 This update brings the ALPR board support to the newest version.
31292 It also fixes a problem with the NAND driver.
31294 Signed-off-by: Stefan Roese <sr@denx.de>
31296 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
31297 Author: Stefan Roese <sr@denx.de>
31298 Date: Fri Jan 5 11:46:05 2007 +0100
31300 [PATCH] nand: Fix problem with oobsize calculation
31302 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
31304 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
31305 returns a 0x15. In the code fragment below bits [1:0] determine the
31306 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
31307 next field is also ANDed with 0x3. However this is a one bit field
31308 as defined in the Hynix and Samsung parts in the 4th ID byte that
31309 determins the oobsize, not a two bit field. It works on Samsung as
31310 bits[3:2] are 01. However for the Hynix there is a 11 in these two
31311 bits, so the oob size gets messed up.
31313 I checked the correct linux code and the suggested fix from Brian is
31314 also available in the linux nand mtd driver.
31316 Signed-off-by: Stefan Roese <sr@denx.de>
31318 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
31319 Author: Stefan Roese <sr@denx.de>
31320 Date: Fri Jan 5 10:40:36 2007 +0100
31322 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
31324 This fix will make the MAL burst disabling patch for the Linux
31325 EMAC driver obsolete.
31327 Signed-off-by: Stefan Roese <sr@denx.de>
31329 commit 023889838282b6237b401664f22dd22dfba2c066
31330 Author: Stefan Roese <sr@denx.de>
31331 Date: Fri Jan 5 10:38:05 2007 +0100
31333 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
31335 This code will optimize the DDR2 controller setup on a board specific
31338 Note: This code doesn't work right now on the NAND booting image for the
31339 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
31341 Signed-off-by: Stefan Roese <sr@denx.de>
31343 commit cce4acbb68398634b8d011ed7bb0d12269c84230
31344 Author: Bartlomiej Sieka <tur@semihalf.com>
31345 Date: Thu Dec 28 19:08:21 2006 +0100
31348 - fix a typo in V38B config file
31349 - move watchdog initialisation earlier in the boot process
31350 - add "wdt=off" to default kernel command line (disables kernel watchdog)
31352 commit 92eb729bad876725aeea908d2addba0800620840
31353 Author: Wolfgang Denk <wd@pollux.denx.de>
31354 Date: Wed Dec 27 01:26:13 2006 +0100
31356 Fix bug in adaption of Stefano Babic's CFI driver patch.
31358 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
31359 Author: Wolfgang Denk <wd@pollux.denx.de>
31360 Date: Sun Dec 24 01:42:57 2006 +0100
31362 Minor code cleanup.
31364 commit d784fdb05900ada3686d5778783e1fb328e9fb66
31365 Author: Stefano Babic <sbabic@denx.de>
31366 Date: Tue Dec 12 00:22:42 2006 +0100
31368 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
31370 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
31371 Author: Stefan Roese <sr@denx.de>
31372 Date: Fri Dec 22 14:29:40 2006 +0100
31374 [PATCH] Fix sequoia flash autodetection (finally correct)
31376 Now 32MByte and 64MByte FLASH is know to work and other
31377 configurations should work too.
31379 Signed-off-by: Stefan Roese <sr@denx.de>
31381 commit 82e5236a8b719543643fd26d5827938ab2b94818
31382 Author: Wolfgang Denk <wd@pollux.denx.de>
31383 Date: Fri Dec 22 10:30:26 2006 +0100
31385 Minor code cleanup; update CHANGELOG.
31387 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
31388 Author: Heiko Schocher <hs@pollux.denx.de>
31389 Date: Thu Dec 21 17:17:02 2006 +0100
31391 Added support for the TQM8272 board from TQ
31393 Signed-off-by: Heiko Schocher <hs@denx.de>
31395 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
31396 Author: Heiko Schocher <hs@pollux.denx.de>
31397 Date: Thu Dec 21 16:14:48 2006 +0100
31399 [PATCH] Add support for the UC101 board from MAN.
31401 Signed-off-by: Heiko Schocher <hs@denx.de>
31403 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
31404 Author: Bartlomiej Sieka <tur@semihalf.com>
31405 Date: Wed Dec 20 00:29:43 2006 +0100
31407 Fix to make the baudrate changes immediate for the MCF52x2 family.
31409 commit daa6e418bcc0c717752e8de939c213c790286096
31410 Author: Bartlomiej Sieka <tur@semihalf.com>
31411 Date: Wed Dec 20 00:27:32 2006 +0100
31413 Preliminary support for the iDMR board (ColdFire).
31415 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
31416 Author: Andrei Safronov <safronov@pollux.denx.de>
31417 Date: Fri Dec 8 16:23:08 2006 +0100
31419 automatic update mechanism
31421 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
31422 Author: roy zang <tie-fei.zang@freescale.com>
31423 Date: Mon Dec 4 17:56:59 2006 +0800
31425 Slight code clean up.
31426 Add comments, delete duplicate define and remove spaces.
31427 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
31429 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
31430 Author: roy zang <tie-fei.zang@freescale.com>
31431 Date: Mon Dec 4 17:54:21 2006 +0800
31433 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
31434 multiplier table can not refect the real PLL clock behavior of these
31435 processors. Please refer to the hardware specification for detailed
31436 information of the corresponding processors.
31437 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
31439 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
31440 Author: roy zang <tie-fei.zang@freescale.com>
31441 Date: Mon Dec 4 14:46:23 2006 +0800
31443 Remove the static MAC address, ip address, server ip, netmask and
31444 gateway ip for network setting.
31445 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
31447 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
31448 Author: roy zang <tie-fei.zang@freescale.com>
31449 Date: Mon Dec 4 14:33:08 2006 +0800
31451 Remove the duplicate memory test code for mpc744ihpc2 board.
31452 If a memory test is needed, please use the functions in
31453 post/memory.c or memtest command.
31454 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
31456 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
31457 Author: roy zang <tie-fei.zang@freescale.com>
31458 Date: Fri Dec 1 19:01:25 2006 +0800
31460 Fix the exception occuring in RAM table search issue.
31461 The original search_one_table() function code can only processes the search
31462 for the exception occurring in FLASH/ROM, because the exception and fixup
31463 table usually locate in FLASH. If the exception address is also in
31464 FLASH, it will be OK.
31465 If the exception occurs in RAM, after the u-boot relocation, a
31466 relocation offset should be added.
31468 clean up the code in cpu/74xx_7xx/cpu.c
31470 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
31472 commit ee311214e0d216f904feea269599d0934bf71f23
31473 Author: roy zang <tie-fei.zang@freescale.com>
31474 Date: Fri Dec 1 11:47:36 2006 +0800
31476 Clean up the code according to codestyle:
31477 (1) remove some C++ comments.
31478 (2) remove trailing white space.
31479 (3) remove trailing empty line.
31480 (4) Indentation by table.
31481 (5) remove {} in one line condition.
31482 (6) add space before '(' in function call.
31483 Remove some weird printf () output.
31484 Add necessary comments.
31485 Modified Makefile to support building in a separate directory.
31487 commit dd520bf314c7add4183c5191692180f576f96b60
31488 Author: Wolfgang Denk <wd@pollux.denx.de>
31489 Date: Thu Nov 30 18:02:20 2006 +0100
31493 commit 8d9a8610b8256331132227e9e6585c6bd5742787
31494 Author: Wolfgang Denk <wd@pollux.denx.de>
31495 Date: Thu Nov 30 01:54:07 2006 +0100
31497 Code cleanup. Update CHANGELOG.
31499 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
31500 Author: Grant Likely <grant.likely@secretlab.ca>
31501 Date: Wed Nov 29 16:23:42 2006 +0100
31503 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
31505 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
31506 not the XLB frequency.
31508 This patch depends on the previous patches for MPC52xx device tree support
31510 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31511 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
31513 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
31514 Author: Stefan Roese <sr@denx.de>
31515 Date: Wed Nov 29 15:42:37 2006 +0100
31517 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
31519 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
31520 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
31521 quite similar and share the same board directory "prodrive/p3mx"
31522 and the same config file "p3mx.h".
31524 Signed-off-by: Stefan Roese <sr@denx.de>
31526 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
31527 Author: Stefan Roese <sr@denx.de>
31528 Date: Wed Nov 29 12:53:15 2006 +0100
31530 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
31532 In the bootvx command the load address was only read from the env
31533 variable "loadaddr" and not optionally passed as paramter as described
31534 in the help. This is fixed with this patch. The behaviour is now the
31535 same as in the bootelf command.
31537 Signed-off-by: Stefan Roese <sr@denx.de>
31539 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
31540 Author: Stefan Roese <sr@denx.de>
31541 Date: Wed Nov 29 12:03:57 2006 +0100
31543 [PATCH] include/ppc440.h minor error affecting interrupts
31545 Fixed include/ppc440.c for UIC address Bug
31547 Corrects bug affecting the addresses for the universal interrupt
31548 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
31550 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
31551 Signed-off-by: Stefan Roese <sr@denx.de>
31553 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
31554 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
31555 Date: Tue Nov 28 16:17:27 2006 -0600
31557 Make fsl-i2c not conflict with SOFT I2C
31559 Signed-off-by: Timur Tabi <timur@freescale.com>
31561 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
31562 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
31563 Date: Tue Nov 28 16:17:18 2006 -0600
31565 Fix I2C master address initialization.
31567 Signed-off-by: Timur Tabi <timur@freescale.com>
31569 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
31570 Author: Kim Phillips <kim.phillips@freescale.com>
31571 Date: Tue Nov 28 23:31:19 2006 -0600
31573 Assign maintainers for mpc8349emds and mpc8360emds
31575 Dave for mpc8360emds, and me for mpc8349emds.
31577 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
31578 Author: Kim Phillips <kim.phillips@freescale.com>
31579 Date: Tue Nov 28 23:28:33 2006 -0600
31581 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
31583 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
31584 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
31586 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
31587 Author: Timur Tabi <timur@freescale.com>
31588 Date: Tue Nov 28 12:09:35 2006 -0600
31590 mpc83xx: Miscellaneous code style fixes
31592 Implement various code style fixes and similar changes.
31594 Signed-off-by: Timur Tabi <timur@freescale.com>
31596 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
31597 Author: Stefan Roese <sr@denx.de>
31598 Date: Tue Nov 28 17:55:49 2006 +0100
31600 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
31602 This patch adds the code and configuration necessary to boot with an
31603 arch/powerpc Linux kernel.
31605 Signed-off-by: Grant Likely <grant.likely@gmail.com>
31606 Acked-by: Jon Loeliger <jdl@freescale.com>
31608 commit e732faec95a83cb468b4850ae807c8301dde8f6a
31609 Author: Stefan Roese <sr@denx.de>
31610 Date: Tue Nov 28 16:09:24 2006 +0100
31612 [PATCH] PPC4xx: 440SP Rev. C detection added
31614 Signed-off-by: Stefan Roese <sr@denx.de>
31616 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
31617 Author: Stefan Roese <sr@denx.de>
31618 Date: Tue Nov 28 11:04:45 2006 +0100
31620 [PATCH] nand: Fix patch merge problem
31622 Signed-off-by: Stefan Roese <sr@denx.de>
31624 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
31625 Author: Stefan Roese <sr@denx.de>
31626 Date: Tue Nov 28 11:04:45 2006 +0100
31628 [PATCH] nand: Fix patch merge problem
31630 Signed-off-by: Stefan Roese <sr@denx.de>
31632 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
31633 Author: Wolfgang Denk <wd@pollux.denx.de>
31634 Date: Mon Nov 27 22:53:53 2006 +0100
31638 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
31639 Author: Stefan Roese <sr@denx.de>
31640 Date: Mon Nov 27 17:43:25 2006 +0100
31642 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
31644 Patch below corrects the setting of the zmiifer register, it was
31645 overwritting the register rather than ORing the settings.
31647 Signed-off-by: Neil Wilson <NWilson@airspan.com>
31648 Signed-off-by: Stefan Roese <sr@denx.de>
31650 commit d1a72545296800b7e219f93104ad5836f0003d66
31651 Author: Stefan Roese <sr@denx.de>
31652 Date: Mon Nov 27 17:34:10 2006 +0100
31654 [PATCH] Select NAND embedded environment from board configuration
31656 The current NAND Bootloader setup forces the environment
31657 variables to be in line with the bootloader. This change
31658 enables the configuration to be made in the board include
31659 file instead so that it can be individually enabled.
31661 Signed-off-by: Nick Spence <nick.spence@freescale.com>
31662 Signed-off-by: Stefan Roese <sr@denx.de>
31664 commit 15784862857c3c2214498defcfed84ff137fb81e
31665 Author: Stefan Roese <sr@denx.de>
31666 Date: Mon Nov 27 17:22:19 2006 +0100
31668 [PATCH] nand_wait() timeout fixes
31670 Two fixes for the nand_wait() function in
31671 drivers/nand/nand_base.c:
31673 1. Use correct timeouts. The original timeouts in Linux
31674 source are 400ms and 20ms not 40s and 20s
31676 2. Return correct error value in case of timeout. 0 is
31679 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
31680 Signed-off-by: Stefan Roese <sr@denx.de>
31682 commit da5553b095bf04f4f109ad7e565dae3aba47b230
31683 Author: Stefan Roese <sr@denx.de>
31684 Date: Mon Nov 27 17:04:06 2006 +0100
31686 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
31688 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
31689 arguments to bootm. It removes the getenv("disable_of") test that used
31690 to be used for this purpose.
31692 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31693 Acked-by: Jon Loeliger <jdl@freescale.com>
31695 commit a9398e018593782c5fa7d0741955fc1256b34c1e
31696 Author: Wolfgang Denk <wd@pollux.denx.de>
31697 Date: Mon Nov 27 15:32:42 2006 +0100
31699 Minor code cleanup. Update CHANGELOG.
31701 commit 1729b92cde575476684bffe819d0b7791b57bff2
31702 Author: Stefan Roese <sr@denx.de>
31703 Date: Mon Nov 27 14:52:04 2006 +0100
31705 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
31707 Signed-off-by: Stefan Roese <sr@denx.de>
31709 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
31710 Author: Stefan Roese <sr@denx.de>
31711 Date: Mon Nov 27 14:49:51 2006 +0100
31713 [PATCH] alpr: remove unused board specific flash driver
31715 Signed-off-by: Stefan Roese <sr@denx.de>
31717 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
31718 Author: Stefan Roese <sr@denx.de>
31719 Date: Mon Nov 27 14:48:41 2006 +0100
31721 [PATCH] 4xx: Fix problem with board specific reset code
31723 Signed-off-by: Stefan Roese <sr@denx.de>
31725 commit ec0c2ec725aec9524a177a77ce75559e644a931a
31726 Author: Stefan Roese <sr@denx.de>
31727 Date: Mon Nov 27 14:46:06 2006 +0100
31729 [PATCH] Remove testing 4xx enet PHY setup
31731 Signed-off-by: Stefan Roese <sr@denx.de>
31733 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
31734 Author: Stefan Roese <sr@denx.de>
31735 Date: Mon Nov 27 14:12:17 2006 +0100
31737 [PATCH] Update Prodrive ALPR board support (440GX)
31739 Signed-off-by: Stefan Roese <sr@denx.de>
31741 commit 58b485776698c3d71ec5a215e392123b4c15afa3
31742 Author: Markus Klotzbuecher <mk@denx.de>
31743 Date: Mon Nov 27 11:51:21 2006 +0100
31745 Add a small README with information on the generic ohci driver.
31747 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
31748 Author: Markus Klotzbuecher <mk@denx.de>
31749 Date: Mon Nov 27 11:46:46 2006 +0100
31751 Fix some endianness issues related to the generic ohci driver
31753 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
31754 Author: Markus Klotzbuecher <mk@denx.de>
31755 Date: Mon Nov 27 11:44:58 2006 +0100
31757 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
31758 to choose between the old and the generic OHCI drivers.
31760 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
31761 Author: Markus Klotzbuecher <mk@denx.de>
31762 Date: Mon Nov 27 11:43:09 2006 +0100
31764 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
31765 and adapted board configs TQM5200 and yosemite accordingly. This commit
31766 also makes the maximum number of root hub ports configurable
31767 (CFG_USB_OHCI_MAX_ROOT_PORTS).
31769 commit 78d620ebb5871d252270dedfad60c6568993b780
31770 Author: Wolfgang Denk <wd@atlas.denx.de>
31771 Date: Thu Nov 23 22:58:58 2006 +0100
31773 Updates for TQM5200 modules:
31774 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
31775 - simplify "udate" definitions
31777 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
31778 Author: Stefan Roese <sr@denx.de>
31779 Date: Wed Nov 22 13:20:50 2006 +0100
31781 [PATCH] PPC4xx start.S: Fix for processor errata
31783 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
31784 errata 1.12: 440_33 by moving patch up in code.
31786 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
31787 Signed-off-by: Stefan Roese <sr@denx.de>
31789 commit 4ef6251403f637841000e0fef9e832aa01339822
31790 Author: Stefan Roese <sr@denx.de>
31791 Date: Mon Nov 20 20:39:52 2006 +0100
31793 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
31795 Signed-off-by: Stefan Roese <sr@denx.de>
31797 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
31798 Author: Wolfgang Denk <wd@pollux.denx.de>
31799 Date: Mon Nov 20 10:28:30 2006 +0100
31803 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
31804 Author: Stefan Roese <sr@denx.de>
31805 Date: Mon Nov 13 13:55:24 2006 +0100
31807 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
31809 * Adds support for AMD command set Top Boot flash geometry reversal
31810 * Adds support for reading JEDEC Manufacturer ID and Device ID
31811 * Adds support for displaying command set, manufacturer id and
31812 device ids (flinfo)
31813 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
31814 * Removes outdated change history (refer to git log instead)
31816 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
31817 Signed-off-by: Stefan Roese <sr@denx.de>
31819 commit b21b511d4c50408f4853f46f06b601272196223f
31820 Author: Wolfgang Denk <wd@pollux.denx.de>
31821 Date: Sun Nov 12 21:13:23 2006 +0100
31825 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
31826 Author: Bartlomiej Sieka <tur@semihalf.com>
31827 Date: Sat Nov 11 22:48:22 2006 +0100
31829 Disable the watchdog in the default config for the V38B board.
31831 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
31832 Author: Bartlomiej Sieka <tur@semihalf.com>
31833 Date: Sat Nov 11 22:43:00 2006 +0100
31835 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
31836 group is enabled for USB earlier (in cpu_init_f() instead of
31837 usb_lowlevel_init()).
31839 commit 91650b3e4de688038d4f71279c44858e3e2c6870
31840 Author: Wolfgang Denk <wd@pollux.denx.de>
31841 Date: Mon Nov 6 17:06:36 2006 +0100
31843 Sequential accesses to non-existent memory must be synchronized,
31844 at least on G2 cores.
31846 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
31848 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
31849 Author: Timur Tabi <timur@freescale.com>
31850 Date: Fri Nov 3 19:15:00 2006 -0600
31852 mpc83xx: Update 83xx to use fsl_i2c.c
31854 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
31855 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
31856 Added multiple I2C bus support to fsl_i2c.c.
31858 Signed-off-by: Timur Tabi <timur@freescale.com>
31860 commit d239d74b1c937984bc519083a8e7de373a390f06
31861 Author: Timur Tabi <timur@freescale.com>
31862 Date: Fri Nov 3 12:00:28 2006 -0600
31864 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
31866 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
31867 tree matches the other 8xxx trees.
31869 Signed-off-by: Timur Tabi <timur@freescale.com>
31871 commit f7fb2e703ec9688541416962724adff70a7322cb
31872 Author: Kim Phillips <kim.phillips@freescale.com>
31873 Date: Thu Nov 2 19:47:11 2006 -0600
31875 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
31877 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
31878 Author: Dave Liu <daveliu@freescale.com>
31879 Date: Thu Nov 2 18:05:50 2006 -0600
31881 mpc83xx: Fix the incorrect dcbz operation
31883 The 834x rev1.x silicon has one CPU5 errata.
31885 The issue is when the data cache locked with
31886 HID0[DLOCK], the dcbz instruction looks like no-op inst.
31888 The right behavior of the data cache is when the data cache
31889 Locked with HID0[DLOCK], the dcbz instruction allocates
31892 The 834x rev3.0 and later and 8360 have not this bug inside.
31894 So, when 834x rev3.0/8360 are working with ECC, the dcbz
31895 instruction will corrupt the stack in cache, the processor will
31898 However, the 834x rev1.x can work with ECC with these code,
31899 because the sillicon has this cache bug. The dcbz will not
31900 corrupt the stack in cache.
31901 Really, it is the fault code running on fault sillicon.
31903 This patch fix the incorrect dcbz operation. Instead of
31904 CPU FP writing to initialise the ECC.
31907 * Fix the incorrect dcbz operation instead of CPU FP
31908 writing to initialise the ECC memory. Otherwise, it
31909 will corrupt the stack in cache, The processor will checkstop
31912 Signed-off-by: Dave Liu <daveliu@freescale.com>
31914 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
31915 Author: Kim Phillips <kim.phillips@freescale.com>
31916 Date: Wed Nov 1 00:10:40 2006 -0600
31918 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
31920 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
31921 STDOUT_PATH configuration bits to mpc8349emds,
31922 mpc8349itx, and mpc8360emds board code.
31924 redo environment to use bootm with the fdtaddr
31925 for booting ARCH=powerpc kernels by default,
31926 and provide default fdtaddr values.
31928 commit 48041365b3420589ad464ebc7752e0053538b729
31929 Author: Kim Phillips <kim.phillips@freescale.com>
31930 Date: Wed Nov 1 00:07:25 2006 -0600
31932 mpc83xx: change ft code to modify local-mac-address property
31934 Update 83xx OF code to update local-mac-address properties
31935 for ethernet instead of the obsolete 'address' property.
31937 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
31938 Author: Timur Tabi <timur@freescale.com>
31939 Date: Tue Oct 31 21:23:16 2006 -0600
31941 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
31943 This patch also adds an improved I2C set_speed(), which handles all clock
31946 Signed-off-by: Timur Tabi <timur@freescale.com>
31948 commit ac4b5622ce050b5ee1e154b98df630d778661632
31949 Author: Dave Liu <daveliu@freescale.com>
31950 Date: Tue Oct 31 19:54:59 2006 -0600
31952 mpc83xx: add the README.mpc8360emds
31954 add doc/README.mpc8360emds to accompany the new board support
31956 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
31957 Author: Dave Liu <daveliu@freescale.com>
31958 Date: Fri Nov 3 12:11:15 2006 -0600
31960 mpc83xx: add QE ethernet support
31962 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
31964 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
31965 Author: Dave Liu <daveliu@freescale.com>
31966 Date: Fri Nov 3 19:33:44 2006 -0600
31968 mpc83xx: Add MPC8360EMDS basic board support
31970 Add support for the Freescale MPC8360EMDS board.
31971 Includes DDR, DUART, Local Bus, PCI.
31973 commit 23892e49352de74f7fac36ff90bb1be143d195e3
31974 Author: Dave Liu <daveliu@freescale.com>
31975 Date: Tue Oct 31 19:30:40 2006 -0600
31977 mpc83xx: add the QUICC Engine (QE) immap file
31979 common QE immap file. Also required for 8360.
31981 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
31982 Author: Dave Liu <daveliu@freescale.com>
31983 Date: Tue Oct 31 19:25:38 2006 -0600
31985 mpc83xx: Add 8360 specifics to 83xx immap
31987 Mainly add QE device dependencies, with appropriate 8360 protection.
31990 commit 988833324a7fda482c8ac3ca23eb539f8232e404
31991 Author: Timur Tabi <timur@freescale.com>
31992 Date: Tue Oct 31 19:14:41 2006 -0600
31994 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
31996 PREREQUISITE PATCHES:
31998 * This patch can only be applied after the following patches have been applied:
32000 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
32001 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
32005 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
32006 the clock for the 2nd USB board (Linux kernel will hang otherwise),
32007 and fix the CONFIG_BOOTARGS macro.
32009 Signed-off-by: Timur Tabi <timur@freescale.com>
32011 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
32012 Author: Timur Tabi <timur@freescale.com>
32013 Date: Tue Oct 31 18:44:42 2006 -0600
32015 mpc83xx: Add support for the MPC8349E-mITX
32017 PREREQUISITE PATCHES:
32019 * This patch can only be applied after the following patches have been applied:
32021 1) DNX#2006090742000024 "Add support for multiple I2C buses"
32022 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
32023 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
32024 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
32025 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
32029 * Add support for the Freescale MPC8349E-mITX reference design platform.
32030 The second TSEC (Vitesse 7385 switch) is not supported at this time.
32032 Signed-off-by: Timur Tabi <timur@freescale.com>
32034 commit 183da6d9b446cc12123455844ad1187e2375626f
32035 Author: Ben Warren <bwarren@qstreams.com>
32036 Date: Tue Sep 12 10:15:53 2006 -0400
32038 Additional MPC8349 support for multibus i2c
32042 Here is a patch for a file that was accidentally left out of a previous
32045 It accompanies the patch with ticket DNX#2006090742000024
32048 Change PCI initialization to use new multi-bus I2C API.
32053 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
32054 Author: Ben Warren <bwarren@qstreams.com>
32055 Date: Thu Sep 7 16:51:04 2006 -0400
32057 Multi-bus I2C implementation of MPC834x
32061 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
32062 family and the MPC8349EMDS board in particular.
32063 This patch requires Patch 1 (Add support for multiple I2C buses).
32064 Testing was performed on a 533MHz board.
32066 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
32068 Signed-off-by: Ben Warren <bwarren@qstreams.com>
32071 Implemented driver-level code to support two I2C buses on the
32072 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
32073 are 50kHz, 100kHz and 400kHz on each bus.
32078 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
32079 Author: Ben Warren <bwarren@qstreams.com>
32080 Date: Thu Sep 7 16:50:54 2006 -0400
32082 Add support for multiple I2C buses
32086 Attached is a patch providing support for multiple I2C buses at the
32087 command level. The second part of the patch includes an implementation
32088 for the MPC834x CPU and MPC8349EMDS board.
32090 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
32092 Signed-off-by: Ben Warren <bwarren@qstreams.com>
32096 1. Include new 'i2c' command (based on USB implementation) using
32097 CONFIG_I2C_CMD_TREE.
32099 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
32100 the commands to change bus number and speed are only available under the
32101 new 'i2c' command mentioned in the first bullet.
32103 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
32104 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
32105 of an array of bus-device pairs. Otherwise, it is an array of uchar.
32108 Added new 'i2c' master command for all I2C interaction. This is
32109 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
32110 setting I2C bus speed as well as changing the active bus if the board
32111 has more than one (conditionally compiled with
32112 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
32118 commit bed85caf872714ebf53013967a695c9d63acfc68
32119 Author: Timur Tabi <timur@freescale.com>
32120 Date: Tue Oct 31 18:13:36 2006 -0600
32122 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
32126 * Errata DDR6, which affects all current MPC 834x processors, lists changes
32127 required to maintain compatibility with various types of DDR memory. This
32128 patch implements those changes.
32130 Signed-off-by: Timur Tabi <timur@freescale.com>
32132 commit afd6e470f639883002c7c59d562690a5cb0f4865
32133 Author: Timur Tabi <timur@freescale.com>
32134 Date: Wed Oct 25 18:45:23 2006 -0500
32136 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
32138 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
32139 Author: Timur Tabi <timur@freescale.com>
32140 Date: Tue Aug 22 17:07:00 2006 -0500
32142 mpc83xx: Add support for variable flash memory sizes on 83xx systems
32146 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
32147 window registers, instead of using a hard-coded value of 8MB.
32149 Signed-off-by: Timur Tabi <timur@freescale.com>
32151 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
32152 Author: Tanya Jiang <tanya.jiang@freescale.com>
32153 Date: Thu Aug 3 18:38:13 2006 +0800
32155 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
32157 Unified TQM834x variable names with 83xx and consolidated macro
32158 in preparation for the 8360 and other upcoming 83xx devices.
32160 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
32162 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
32163 Author: Dave Liu <daveliu@freescale.com>
32164 Date: Wed Oct 25 14:41:21 2006 -0500
32166 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
32168 Incorporated the common unified variable names and the changes in preparation
32169 for releasing mpc8360 patches.
32171 Signed-off-by: Dave Liu <daveliu@freescale.com>
32173 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
32174 Author: Tanya Jiang <tanya.jiang@freescale.com>
32175 Date: Thu Aug 3 18:36:02 2006 +0800
32177 mpc83xx: Fix missing build for mpc8349emds pci.c
32179 Make pci build for mpc8349emds
32181 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
32183 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
32184 Author: Tanya Jiang <tanya.jiang@freescale.com>
32185 Date: Thu Aug 3 18:39:49 2006 +0800
32187 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
32189 Removed unused file resetvec.S for mpc83xx cpu
32191 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
32193 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
32194 Author: Nick Spence <Nick.Spence@freescale.com>
32195 Date: Sat Sep 30 00:32:59 2006 -0700
32197 NAND Flash verify across block boundaries
32199 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
32201 and the write crosses a block boundary. The pointer to the verification
32202 buffer (bufstart) is not being updated to reflect the starting of the
32204 block so the verification of the second block fails.
32208 * Fix NAND FLASH page verification across block boundaries
32210 commit f484dc791a3932537213c43c654cc1295c64b84c
32211 Author: Nick Spence <nick.spence@freescale.com>
32212 Date: Thu Sep 7 07:39:46 2006 -0700
32214 Added RGMII support to the TSECs and Marvell 881111 Phy
32216 Added a phy initialization to adjust the RGMII RX and TX timing
32217 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
32219 Signed-off-by: Nick Spence <nick.spence@freescale.com>
32221 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
32222 Author: roy zang <tie-fei.zang@freescale.com>
32223 Date: Fri Nov 3 13:10:00 2006 +0800
32225 Remove some unused CFG define.
32226 undef CFG_DRAM_TEST
32228 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
32229 Author: roy zang <tie-fei.zang@freescale.com>
32230 Date: Fri Nov 3 13:07:36 2006 +0800
32232 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
32233 Both work. 0xFF000000 seems more reasonable.
32235 commit c59200443072353044aa4bf737a5a60f9a9af231
32236 Author: Wolfgang Denk <wd@pollux.denx.de>
32237 Date: Thu Nov 2 15:15:01 2006 +0100
32239 Release U-Boot 1.1.6
32241 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
32242 Author: roy zang <tie-fei.zang@freescale.com>
32243 Date: Thu Nov 2 19:14:48 2006 +0800
32245 This patch comes from Yuli's posted patch on 8/8/2006
32246 titled "CFI Driver Little-Endian write Issue".
32248 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
32250 If that patch applied, please discard this one.
32251 Until now , I do not see his patch is applied. So please apply this one.
32253 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
32254 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32256 commit b825f158e449e1e9cf74c08e572955e122394c96
32257 Author: roy zang <tie-fei.zang@freescale.com>
32258 Date: Thu Nov 2 19:12:31 2006 +0800
32260 Tsi108 on chip i2c support.
32262 The i2c Interface provides a master-only, serial interface that can be
32263 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
32266 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
32267 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32269 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
32270 Author: roy zang <tie-fei.zang@freescale.com>
32271 Date: Thu Nov 2 19:11:06 2006 +0800
32273 Tsi108 on chip pci controller support.
32275 If there is no pci card, the tsi108/109 pci configure read will
32276 cause a machine check exception to the processor. PCI error should
32277 also be cleared after the read.
32279 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
32280 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32282 commit d1927cee977126e547ceeba23e4f978f377cfb8f
32283 Author: roy zang <tie-fei.zang@freescale.com>
32284 Date: Thu Nov 2 19:08:55 2006 +0800
32286 Tundra tsi108 on chip Ethernet controller support.
32288 The following is a brief description of the Ethernet controller:
32289 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
32290 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
32291 to manage the two physical connection devices (PHYs). Each Ethernet port
32292 has its own statistics monitor that tracks and reports key interface
32293 statistics. Each port supports a 256-entry hash table for address
32294 filtering. In addition, each port is bridged to the Switch Fabric
32295 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
32297 Each Ethernet port also has a pair of internal Ethernet DMA channels to
32298 support the transmit and receive data flows. The Ethernet DMA channels
32299 use descriptors set up in memory, the memory map of the device, and
32300 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
32301 handles arbitration for the Switch Fabric. The Controller also
32302 has a register businterface for register accesses and status monitor
32305 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
32306 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
32307 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
32308 data flows to and from the Ethernet Controller through the Switch Fabric.
32310 Each Ethernet port uses its transmit and receive DMA channels to manage
32311 data flows through buffer descriptors that are predefined by the
32312 system (the descriptors can exist anywhere in the system memory map).
32313 These descriptors are data structures that point to buffers filled
32314 with data ready to transmit over Ethernet, or they point to empty
32315 buffers ready to receive data from Ethernet.
32317 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
32318 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32320 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
32321 Author: roy zang <tie-fei.zang@freescale.com>
32322 Date: Thu Nov 2 19:01:33 2006 +0800
32324 Tundra tsi108 header file.
32326 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
32327 PowerPC processors that offers numerous system interconnect options for
32328 embedded application designers. The Tsi108 can interconnect 60x or
32329 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
32330 and Flash. Provided the macro define for tsi108 chip.
32332 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
32333 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32335 commit 87c4db09699c6b89176b31004afcb83eb1585d47
32336 Author: roy zang <tie-fei.zang@freescale.com>
32337 Date: Thu Nov 2 18:59:15 2006 +0800
32339 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
32340 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
32342 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
32343 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32345 commit 27801b8ab11c61b577e45742a515bb3b23b80241
32346 Author: roy zang <tie-fei.zang@freescale.com>
32347 Date: Thu Nov 2 18:57:21 2006 +0800
32349 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
32350 Make ,config.mk and link file for the mpc7448hpc2 board.
32352 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
32353 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32355 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
32356 Author: roy zang <tie-fei.zang@freescale.com>
32357 Date: Thu Nov 2 18:55:04 2006 +0800
32359 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
32360 The mpc7448hpc2 board support header file.
32362 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
32363 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32365 commit 625bb5ddb50b243f931262ca8c46956409471917
32366 Author: roy zang <tie-fei.zang@freescale.com>
32367 Date: Thu Nov 2 18:52:21 2006 +0800
32369 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
32370 The mpc7448hpc2 board support low level assemble language init code.
32372 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
32373 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32375 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
32376 Author: roy zang <tie-fei.zang@freescale.com>
32377 Date: Thu Nov 2 18:49:51 2006 +0800
32379 General code modification for mpc7448hpc2 board support.
32380 1. Add 7447A and 7448 processor support.
32381 2. Add the following flags.
32383 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
32384 (such as by switch on board), this flag should be set.
32386 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
32387 relocates to RAM, this flag should be set.
32389 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
32390 system hang in exception, this flag should be set.
32392 There is a design issue for tsi108/109 pci configure read. When pci scan
32393 the slots, if there is no pci card, the tsi108/9 will cause a machine
32394 check exception for mpc7448 processor.
32396 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
32397 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32399 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
32400 Author: roy zang <tie-fei.zang@freescale.com>
32401 Date: Thu Nov 2 18:34:47 2006 +0800
32403 Add README file for mpc7448hpc2 board.
32404 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
32406 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
32407 Author: Bartlomiej Sieka <tur@semihalf.com>
32408 Date: Wed Nov 1 02:04:38 2006 +0100
32410 Finish up support for MarelV38B board
32411 - add watchdog support
32412 - enable GPIO_WKUP_7 pin for input
32415 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
32416 Author: Bartlomiej Sieka <tur@semihalf.com>
32417 Date: Wed Nov 1 01:45:46 2006 +0100
32419 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
32420 * remove warnings when compiling ethaddr.c
32421 * adjust linker script (fixes a crash resulting from incorrect
32422 definition of __u_boot_cmd_start)
32423 - Some MarelV38B code cleanup.
32425 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
32426 Author: Bartlomiej Sieka <tur@semihalf.com>
32427 Date: Wed Nov 1 01:38:16 2006 +0100
32429 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
32430 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
32431 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
32432 MPC5XXX_WU_GPIO_DATA_O for affected boards.
32434 - Add defintions for some MPC5XXX GPIO pins.
32436 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
32437 Author: Bartlomiej Sieka <tur@semihalf.com>
32438 Date: Wed Nov 1 01:34:29 2006 +0100
32440 Changed MarelV38B board make target to lowercase. Config file cleanup.
32442 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
32443 Author: Wolfgang Denk <wd@pollux.denx.de>
32444 Date: Sun Oct 29 01:03:51 2006 +0200
32446 Automatically adjust ARFLAGS so "make -s" is really silent.
32448 commit fae684e89844856383bdf101440889557df3e6b1
32449 Author: Stefan Roese <sr@denx.de>
32450 Date: Sat Oct 28 16:45:00 2006 +0200
32452 [PATCH] omap925.c: Remove unused functions
32454 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
32455 Signed-off-by: Stefan Roese <sr@denx.de>
32457 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
32458 Author: Stefan Roese <sr@denx.de>
32459 Date: Sat Oct 28 17:12:58 2006 +0200
32461 [PATCH] Add some missing machtypes for netstar & voiceblue boards
32463 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
32466 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
32467 Signed-off-by: Stefan Roese <sr@denx.de>
32469 commit 856f054410cef52d868feb330168b2a4c4091328
32470 Author: Stefan Roese <sr@denx.de>
32471 Date: Sat Oct 28 15:55:52 2006 +0200
32473 [PATCH] NAND: Partition name support added to NAND subsystem
32475 chpart, nboot and NAND subsystem related commands now accept also partition
32476 name to specify offset.
32478 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
32479 Signed-off-by: Stefan Roese <sr@denx.de>
32481 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
32482 Author: Wolfgang Denk <wd@pollux.denx.de>
32483 Date: Sat Oct 28 02:29:44 2006 +0200
32487 commit 2751a95abd1b96911081c357e96a12fa97b40dee
32488 Author: Wolfgang Denk <wd@pollux.denx.de>
32489 Date: Sat Oct 28 02:29:14 2006 +0200
32491 Enable commandline editing and hush shell on all TQM boards.
32493 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
32494 Author: Wolfgang Denk <wd@pollux.denx.de>
32495 Date: Sat Oct 28 02:28:02 2006 +0200
32497 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
32499 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
32500 Author: Wolfgang Denk <wd@denx.de>
32501 Date: Sat Oct 28 01:14:32 2006 +0200
32503 Check for illegal character '=' in environment variable names.
32505 Make sure the string passed as variable name does not contain a '='
32506 character. This not only prevents the common error or typing
32507 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
32508 also closes a backdoor which allowed to delete write-protected
32509 environment variables, for example by using "setenv ethaddr=".
32511 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
32512 Author: Wolfgang Denk <wd@pollux.denx.de>
32513 Date: Sat Oct 28 00:38:39 2006 +0200
32515 Minor code cleanup.
32517 commit e11887a77d81077416a2d1c5e0354916fee8c034
32518 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32519 Date: Thu Oct 26 17:55:31 2006 +0200
32521 Don't pass any debug options directly to the assembler
32523 When passing the -g option to gcc, gcc automatically selects a
32524 suitable --g<format> option to pass on to the assembler.
32525 Thus, there's no point in forcing a specific debug option on the
32526 assembler using the -Wa mechanism.
32528 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32530 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
32531 Author: Jon Loeliger <jdl@freescale.com>
32532 Date: Fri Oct 27 07:47:22 2006 -0500
32534 MPC86xx: Cleaned up unused and conditionally used local variables.
32536 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32538 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
32539 Author: Wolfgang Denk <wd@pollux.denx.de>
32540 Date: Fri Oct 27 11:55:21 2006 +0200
32542 Fix "ar" flags in some Makefiles to allow for silent "make -s"
32544 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
32545 Author: Ben Warren <bwarren@qstreams.com>
32546 Date: Thu Oct 26 14:38:25 2006 -0400
32548 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
32549 to a TSEC (e.g. a switch is connected via RMII) or
32550 if the PHY is defective/incorrectly configured.
32552 Signed-off-by: Ben Warren <bwarren@qstreams.com>
32554 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
32555 Author: Ben Warren <bwarren@qstreams.com>
32556 Date: Thu Oct 26 14:38:25 2006 -0400
32558 Fix TSEC driver: avoid crashes if PHY is not attached
32559 to a TSEC (e.g. a switch is connected via RMII) or
32560 if the PHY is defective/incorrectly configured.
32562 Signed-off-by: Ben Warren <bwarren@qstreams.com>
32564 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
32565 Author: Wolfgang Denk <wd@pollux.denx.de>
32566 Date: Thu Oct 26 16:24:31 2006 +0200
32570 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
32571 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32572 Date: Wed Oct 25 15:48:59 2006 +0200
32574 Finish up support for the ATSTK1000/ATSTK1002 boards
32576 Add atstk1002_config target to Makefile and move the AVR32 section
32577 down below Blackfin so that it doesn't end up in the middle of
32580 Drop the autogenerated linker script thing for now. Will have to
32581 revisit how to handle chips with different flash and RAM layout
32584 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32586 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
32587 Author: Kumar Gala <galak@kernel.crashing.org>
32588 Date: Tue Oct 24 23:47:37 2006 -0500
32590 Added support for Multi-Image files that contain a device tree
32592 If a Multi-Image file contains a third image we try to use it as a
32593 device tree. The device tree image is assumed to be uncompressed in the
32594 image file. We automatically allocate space for the device tree in memory
32595 and provide an 8k pad to allow more than a reasonable amount of growth.
32597 Additionally, a device tree that was contained in flash will now automatically
32598 get copied to system memory as part of boot. Previously an error was
32599 reported if one tried to boot a device tree that was in flash.
32601 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32603 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
32604 Author: Wolfgang Denk <wd@denx.de>
32605 Date: Tue Oct 24 21:35:55 2006 +0200
32607 Switch to automatically generated CHANGELOG file.
32608 (use "make CHANGELOG" to update it from time to time)
32610 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
32611 Author: Stefan Roese <sr@denx.de>
32612 Date: Tue Oct 24 18:06:48 2006 +0200
32614 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
32615 Patch by Stefan Roese, 24 Oct 2006
32617 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
32618 Author: Wolfgang Denk <wd@pollux.denx.de>
32619 Date: Tue Oct 24 17:24:55 2006 +0200
32621 Merge with /home/wd/git/u-boot/master
32623 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
32624 Author: Wolfgang Denk <wd@pollux.denx.de>
32625 Date: Tue Oct 24 15:32:57 2006 +0200
32629 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
32630 Author: Wolfgang Denk <wd@pollux.denx.de>
32631 Date: Tue Oct 24 14:51:36 2006 +0200
32633 Move atstk1000 files into vendor specific directory.
32634 Patch by Haavard Skinnemoen, 12 Sep 2006
32636 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
32637 Author: Wolfgang Denk <wd@pollux.denx.de>
32638 Date: Tue Oct 24 14:42:37 2006 +0200
32640 Add ATSTK1000 and ATSTK1002 board support
32641 Patch by Haavard Skinnemoen, 06 Sep 2006
32643 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
32646 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
32647 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
32648 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
32649 CompactFlash cards. For more information, please see this page:
32651 http://www.atmel.com/dyn/products/tools.asp?family_id=682
32653 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
32656 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32658 commit f93ae788c3640fcde5db383471d45548ff4060d0
32659 Author: Wolfgang Denk <wd@pollux.denx.de>
32660 Date: Tue Oct 24 14:31:24 2006 +0200
32662 Add common serial driver for Atmel AT32 and AT91 chips
32663 Patch by Haavard Skinnemoen, 06 Sep 2006
32665 This is a first attempt at creating a common serial driver for Atmel
32666 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
32667 be possible to support AT91RM9200 and other ARM-based chips with some
32668 minor modifications.
32670 There's nothing fundamentally AVR32-specific in this driver, but it
32671 does use some features which are currently only defined for the
32673 * pm_get_clock_freq: Obtain the clock frequency of a given domain
32674 * gd->console_uart: A "struct device" containing information about
32675 register mappings, gpio resources and clocks associated with the
32678 For more information about these features, please see the "AT32AP
32681 commit 72a087e04705c26cad982879ebd06b5281bf825a
32682 Author: Wolfgang Denk <wd@pollux.denx.de>
32683 Date: Tue Oct 24 14:27:35 2006 +0200
32685 Add AT32AP CPU and AT32AP7000 SoC support
32686 Patch by Haavard Skinnemoen, 06 Sep 2006
32688 This patch adds support for the AT32AP CPU family and the AT32AP7000
32689 chip, which is the first chip implementing the AVR32 architecture.
32691 The AT32AP CPU core is a high-performance implementation featuring a
32692 7-stage pipeline, separate instruction- and data caches, and a MMU.
32693 For more information, please see the "AVR32 AP Technical Reference":
32695 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
32697 In addition to this, the AT32AP7000 chip comes with a large set of
32698 integrated peripherals, many of which are shared with the AT91 series
32699 of ARM-based microcontrollers from Atmel. Full data sheet is
32702 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
32704 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32706 commit 7b64fef33c66be648826c0ff9758298ef13d0604
32707 Author: Wolfgang Denk <wd@pollux.denx.de>
32708 Date: Tue Oct 24 14:21:16 2006 +0200
32710 Add AVR32 architecture support
32711 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
32713 This patch adds common infrastructure code for the Atmel AVR32
32714 architecture. See doc/README.AVR32 for details.
32716 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32718 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
32719 Author: Wolfgang Denk <wd@pollux.denx.de>
32720 Date: Tue Oct 24 13:57:33 2006 +0200
32722 Use -g instead of -gstabs in AFLAGS_DEBUG
32723 Patch by Haavard Skinnemoen, 30 Aug 2006
32725 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
32726 matter what the target's preferred debugging format is. This patch
32727 simply replaces -gstabs with -g, so that the default debugging format
32728 for the architecture is used.
32730 commit 965829872169c2996023840d98e1d85ad148d629
32731 Author: Wolfgang Denk <wd@pollux.denx.de>
32732 Date: Tue Oct 24 13:55:18 2006 +0200
32734 Fix/workaround broken dependency handling with make 3.81
32735 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
32737 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
32738 Author: Marian Balakowicz <m8@semihalf.com>
32739 Date: Mon Oct 23 22:17:05 2006 +0200
32741 Fix sequoia separate object direcory building problems.
32743 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
32744 Author: Jon Loeliger <jdl@freescale.com>
32745 Date: Fri Oct 20 17:16:35 2006 -0500
32747 Use generic I2C register block on 85xx and 86xx.
32749 Replace private IMMAP I2C structures with generic reg block
32750 and allow 86xx to have multiple I2C device busses.
32752 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32754 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
32755 Author: Jon Loeliger <jdl@freescale.com>
32756 Date: Fri Oct 20 15:54:34 2006 -0500
32758 Fix compilation warnings on a few 85xx boards.
32760 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32762 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
32763 Author: Jon Loeliger <jdl@freescale.com>
32764 Date: Fri Oct 20 15:50:15 2006 -0500
32766 Converted all 85xx boards to use a common FSL I2C driver.
32767 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
32768 And removed hard i2c path from a few u-boot.lds scipts too.
32769 Minor whitespace cleanups along the way.
32771 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32773 commit 4d45f69e362b05892c9e92a7907e5820995612aa
32774 Author: Jon Loeliger <jdl@freescale.com>
32775 Date: Thu Oct 19 12:02:24 2006 -0500
32777 Rewrite a series of goto statements as a sequences of
32778 conditional expressions instead.
32780 Use consistent return code 0/-1 for good/bad indicators.
32782 Include one fewer file if the driver isn't used at all.
32784 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32786 commit 7237c033b02fe295880435f1eb80819a0c987532
32787 Author: Jon Loeliger <jdl@freescale.com>
32788 Date: Thu Oct 19 11:02:16 2006 -0500
32790 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
32792 in an effort to begin to unify the umpteen FSL I2C drivers that
32793 are all otherwise very similar.
32795 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32797 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
32798 Author: Jon Loeliger <jdl@freescale.com>
32799 Date: Thu Oct 19 11:33:52 2006 -0500
32801 * Fix a bunch of compiler warnings for gcc 4.0
32803 Signed-off-by: Matthew McClintock <msm@freescale.com>
32805 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
32806 Author: Stefan Roese <sr@denx.de>
32807 Date: Tue Oct 17 06:14:31 2006 +0200
32809 Add monitor functions for indirect access to PPC440 DCR's
32810 Patch by Leonid Baryudin, 12 Oct 2006
32812 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
32813 Author: Jon Loeliger <jdl@freescale.com>
32814 Date: Fri Oct 13 16:47:53 2006 -0500
32816 Fixed leading whitespace issues.
32817 Removed spurious LAWAR thing.
32819 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32821 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
32822 Author: Jon Loeliger <jdl@freescale.com>
32823 Date: Thu Oct 12 10:42:36 2006 -0500
32825 Remove unneeded include files and local variable.
32827 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32829 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
32830 Author: Grant Likely <grant.likely@secretlab.ca>
32831 Date: Tue Oct 10 00:23:32 2006 -0600
32833 Fix possible uninitialized variable compiler warning.
32835 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
32836 do_bootm_linux() may be uninitialized. There is no possibility in the
32837 current code that len will get used uninitialized, but this fix follows
32838 the existing convention of setting both len and data to zero at the same
32841 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
32843 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
32844 Author: Matthew McClintock <msm@freescale.com>
32845 Date: Wed Oct 11 15:13:01 2006 -0500
32847 * Fix a bunch of compiler warnings for gcc 4.0
32849 Signed-off-by: Matthew McClintock <msm@freescale.com>
32851 commit bf651baa365e5447246aad6a633ccd667cf24a39
32852 Author: Jon Loeliger <jdl@freescale.com>
32853 Date: Wed Oct 11 10:10:43 2006 -0500
32855 Move "ar" flags to config.mk to allow for silent "make -s"
32857 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
32858 Author: Jon Loeliger <jdl@freescale.com>
32859 Date: Tue Oct 10 17:19:03 2006 -0500
32861 Coding style changes to remove local varible blocks
32862 and reformat a bit nicer.
32864 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
32865 Author: Jon Loeliger <jdl@freescale.com>
32866 Date: Tue Oct 10 17:16:04 2006 -0500
32868 Fix whitespace issues.
32870 commit 7b382b7125f2397cce63253df62f183e3dfa2770
32871 Author: Jon Loeliger <jdl@freescale.com>
32872 Date: Tue Oct 10 17:14:45 2006 -0500
32874 Fix whitespace issues.
32876 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
32877 Author: Jon Loeliger <jdl@freescale.com>
32878 Date: Tue Oct 10 17:06:53 2006 -0500
32880 Fix whitespace issues.
32882 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
32883 Author: Jon Loeliger <jdl@freescale.com>
32884 Date: Tue Oct 10 17:03:43 2006 -0500
32886 Ran lindent and cleaned up whitespace issues.
32887 Format for 80-columns too.
32889 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
32890 Author: Jon Loeliger <jdl@freescale.com>
32891 Date: Tue Oct 10 17:02:22 2006 -0500
32893 Fix whitespace and 80-col issues.
32895 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
32896 Author: Stefan Roese <sr@denx.de>
32897 Date: Sat Oct 7 11:36:51 2006 +0200
32899 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
32900 Patch by Stefan Roese, 07 Oct 2006
32902 commit 5bc528fa4da751d472397b308137238a6465afd2
32903 Author: Stefan Roese <sr@denx.de>
32904 Date: Sat Oct 7 11:35:25 2006 +0200
32906 Update ALPR code (NAND support working now)
32907 Patch by Stefan Roese, 07 Oct 2006
32909 commit 77d5034847d328753b80c46b83f960a14a26f40e
32910 Author: Stefan Roese <sr@denx.de>
32911 Date: Sat Oct 7 11:33:03 2006 +0200
32913 Remove compile warnings in fpga code
32914 Patch by Stefan Roese, 07 Oct 2006
32916 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
32917 Author: Stefan Roese <sr@denx.de>
32918 Date: Sat Oct 7 11:30:52 2006 +0200
32920 Add CONFIG_BOARD_RESET to configure board specific reset function
32921 Patch by Stefan Roese, 07 Oct 2006
32923 commit f55df18187e7a45cb73fec4370d12135e6691ae1
32924 Author: John Traill <john.traill@freescale.com>
32925 Date: Fri Sep 29 08:23:12 2006 +0100
32927 Fix missing tCycle/modfreq calculation.
32929 Signed-off-by: John Traill <john.traill@freescale.com>
32931 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
32932 Author: Andy Fleming <afleming@freescale.com>
32933 Date: Wed Sep 13 10:33:35 2006 -0500
32935 Updated config headers to add default FDT-based booting
32937 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
32938 Author: Andy Fleming <afleming@freescale.com>
32939 Date: Wed Sep 13 10:34:18 2006 -0500
32941 Add support for eTSEC 3 & 4 on 8548 CDS
32943 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
32944 This will only work on rev 1.3 boards (but doesn't break older boards)
32945 * Cleaned up some comments to reflect the expanded role of tsec
32948 commit 084d648b109c8984f83674043c1a7fa3885ef801
32949 Author: Andy Fleming <afleming@freescale.com>
32950 Date: Wed Sep 13 10:33:56 2006 -0500
32952 Added code to support 2.6.18 PCI changes in u-boot
32954 * Added code to swizzle the IRQ map for the PCI
32956 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
32957 Author: Jon Loeliger <jdl@freescale.com>
32958 Date: Tue Sep 19 09:34:10 2006 -0500
32960 Modified makefile for new build mechanism.
32962 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32964 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
32965 Author: Jon Loeliger <jdl@freescale.com>
32966 Date: Thu Sep 14 08:40:36 2006 -0500
32968 Handle 86xx SVR values according to the new Reference Manual.
32969 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
32970 by the byte in bits 16-23 instead.
32971 Thanks to Jason Jin for noticing.
32973 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32975 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
32976 Author: Zhang Wei <wei.zhang@freescale.com>
32977 Date: Mon Aug 28 14:25:31 2006 +0800
32979 Fixed an OF-tree off-by-one bug when adding a new property name.
32980 This bug will cause the kernel booting to pause a long time.
32982 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
32983 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
32985 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
32986 Author: Jon Loeliger <jdl@freescale.com>
32987 Date: Tue Aug 29 11:05:09 2006 -0500
32989 Remove trailing empty lines.
32991 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
32992 Author: Jon Loeliger <jdl@freescale.com>
32993 Date: Tue Aug 29 09:48:49 2006 -0500
32995 Remove bogus msync and use volatile asm.
32997 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
32998 Author: Jon Loeliger <jdl@freescale.com>
32999 Date: Tue Aug 29 08:17:14 2006 -0500
33001 Add myself as maintainer for MPC8641HPCN.
33003 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
33004 Author: Zhang Wei <wei.zhang@freescale.com>
33005 Date: Mon Aug 28 14:25:31 2006 +0800
33007 Fixed an OF-tree off-by-one bug when adding a new property name.
33008 This bug will cause the kernel booting to pause a long time.
33010 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
33012 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
33013 Author: Haiying Wang <haiying.wang@freescale.com>
33014 Date: Fri Aug 25 14:38:34 2006 -0400
33016 Change ramdiskaddr and dtbaddr
33017 Remove PEX fluff commands.
33019 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
33020 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33022 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
33023 Author: Matthew McClintock <msm@freescale.com>
33024 Date: Wed Aug 23 13:32:45 2006 -0500
33026 * Another small fix for booting with disable_of
33028 Signed-off-by: Matthew McClintock <msm@freescale.com>
33030 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
33031 Author: Jon Loeliger <jdl@freescale.com>
33032 Date: Wed Aug 23 11:04:43 2006 -0500
33034 Cleanup and lindent new AHCI driver.
33036 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
33037 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
33038 Date: Wed Aug 23 19:15:12 2006 +0800
33040 Add AHCI define and sata support for MPC8641HPCN board.
33042 Signed-off-by:Jason Jin<jason.jin@freescale.com>
33044 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
33045 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
33046 Date: Wed Aug 23 19:10:44 2006 +0800
33048 Add AHCI support to u-boot
33050 Add AHCI support in u-boot, enable the sata disk controllers which
33051 following the AHCI protocol.
33053 Signed-off-by:Jason Jin<jason.jin@freescale.com>
33055 commit d8ea2acf5f137cae99417df4f573d036ee384668
33056 Author: Zhang Wei <wei.zhang@freescale.com>
33057 Date: Wed Aug 23 17:54:32 2006 +0800
33059 Add dtb boot-up parameter to default boot commands.
33061 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
33063 commit b93775c2036b99baa390ea425c4771895bbc63c4
33064 Author: Jon Loeliger <jdl@freescale.com>
33065 Date: Tue Aug 22 18:26:08 2006 -0500
33067 Cleanup even more poorly introduced whitespace.
33069 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
33070 Author: Jon Loeliger <jdl@freescale.com>
33071 Date: Tue Aug 22 18:07:00 2006 -0500
33073 Cleanup more poorly introduced whitespace.
33075 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
33076 Author: Jon Loeliger <jdl@freescale.com>
33077 Date: Tue Aug 22 17:54:05 2006 -0500
33079 Cleanup poorly introduced whitespace.
33081 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
33082 Author: Jon Loeliger <jdl@freescale.com>
33083 Date: Tue Aug 22 12:25:27 2006 -0500
33085 General indent and whitespace cleanups.
33087 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
33088 Author: Jon Loeliger <jdl@freescale.com>
33089 Date: Tue Aug 22 12:06:18 2006 -0500
33091 General indent and whitespace cleanups.
33093 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
33094 Author: Jon Loeliger <jdl@freescale.com>
33095 Date: Tue Aug 22 10:42:21 2006 -0500
33097 Cleanup compiler warnings.
33099 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
33100 Author: Matthew McClintock <msm@freescale.com>
33101 Date: Tue Aug 22 09:31:59 2006 -0500
33103 Fix disable_of booting
33105 Signed-off-by: Matthew McClintock <msm@freescale.com>
33107 commit 87a449c8ac396420cb24260f717ea9e6faa82047
33108 Author: Matthew McClintock <msm@freescale.com>
33109 Date: Tue Aug 22 09:23:55 2006 -0500
33111 Support for FDT in uImage format, error when using FDT from flash
33113 Signed-off-by: Matthew McClintock <msm@freescale.com>
33115 commit 75c299c38369d01addd5e054b8a16217b70f4a86
33116 Author: Haiying Wang <haiying.wang@freescale.com>
33117 Date: Tue Aug 15 15:12:55 2006 -0400
33119 Unlock cache before kernel starts up for MPC86xx
33121 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
33122 Author: Haiying Wang <haiying.wang@freescale.com>
33123 Date: Tue Aug 15 15:13:15 2006 -0400
33125 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
33127 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
33128 Author: Haiying Wang <haiying.wang@freescale.com>
33129 Date: Tue Aug 15 15:12:55 2006 -0400
33131 Unlock cache before kernel starts up for MPC86xx
33133 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
33134 Author: Haiying Wang <haiying.wang@freescale.com>
33135 Date: Tue Aug 15 15:13:15 2006 -0400
33137 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
33139 commit 86c8e17f25e972a7e272950a0735fad84e082b88
33140 Author: Matthew McClintock <msm@freescale.com>
33141 Date: Wed Aug 16 13:59:47 2006 -0500
33143 * Fix disable_of booting
33145 Signed-off-by: Matthew McClintock <msm@freescale.com>
33147 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
33148 Author: Matthew McClintock <msm@freescale.com>
33149 Date: Wed Aug 16 10:54:09 2006 -0500
33151 * Support for FDT in uImage format, error when using FDT from flash
33153 Signed-off-by: Matthew McClintock <msm@freescale.com>
33155 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
33156 Author: Stefan Roese <sr@denx.de>
33157 Date: Tue Aug 15 14:22:35 2006 +0200
33159 Add initial support for the ALPR board from Prodrive
33160 NAND needs some additional testing
33161 Patch by Heiko Schocher, 15 Aug 2006
33163 commit f0ff4692ff3372dec55074a8eb444943ab095abb
33164 Author: Stefan Roese <sr@denx.de>
33165 Date: Tue Aug 15 14:15:51 2006 +0200
33167 Add FPGA Altera Cyclone 2 support
33168 Patch by Heiko Schocher, 15 Aug 2006
33170 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
33171 Author: Jon Loeliger <jdl@freescale.com>
33172 Date: Mon Aug 14 15:33:38 2006 -0500
33174 Fix BAT0 to actually be cacheable, non-guarded as documented.
33176 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33178 commit 40bc83559db5745681909fd7382ae509567e116d
33179 Author: Jon Loeliger <jdl@freescale.com>
33180 Date: Wed Aug 9 15:32:16 2006 -0500
33182 Removed MPC8641HPCN DTS source file from build.
33183 It is no longer linked into U-Boot; its sources are
33184 now located in the kernel tree.
33186 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33188 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
33189 Author: Matthew McClintock <msm@freescale.com>
33190 Date: Wed Jun 28 10:47:03 2006 -0500
33192 * Switched default PCI speed for 8540 ADS back to 33MHz
33194 * Added comments and a printf to warn that PCI-X won't
33196 Patch by Andy Fleming 17-Mar-2006
33198 Signed-off-by: Andy Fleming <afleming@freescale.com>
33200 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
33201 Author: Matthew McClintock <msm@freescale.com>
33202 Date: Wed Jun 28 10:46:35 2006 -0500
33204 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
33206 Signed-off-by: Andy Fleming <afleming@freescale.com>
33208 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
33209 Author: Matthew McClintock <msm@freescale.com>
33210 Date: Wed Jun 28 10:46:13 2006 -0500
33212 * Added VIA configuration table
33214 * Added support for PCI2 on CDS
33215 Patch by Andy Fleming 17-Mar-2006
33217 Signed-off-by: Andy Fleming <afleming@freescale.com>
33219 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
33220 Author: Matthew McClintock <msm@freescale.com>
33221 Date: Wed Jun 28 10:45:41 2006 -0500
33223 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
33225 Signed-off-by: Andy Fleming <afleming@freescale.com>
33227 commit 97074ed9655309b64231bc2cee69fe85399f8055
33228 Author: Matthew McClintock <msm@freescale.com>
33229 Date: Wed Jun 28 10:45:17 2006 -0500
33231 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
33233 Signed-off-by: Andy Fleming <afleming@freescale.com>
33235 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
33236 Author: Matthew McClintock <msm@freescale.com>
33237 Date: Wed Jun 28 10:44:49 2006 -0500
33239 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
33241 Signed-off-by: Andy Fleming <afleming@freescale.com>
33243 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
33244 Author: Matthew McClintock <msm@freescale.com>
33245 Date: Wed Jun 28 10:44:23 2006 -0500
33247 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
33249 Signed-off-by: Andy Fleming <afleming@freescale.com>
33251 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
33252 Author: Matthew McClintock <msm@freescale.com>
33253 Date: Wed Jun 28 10:43:36 2006 -0500
33255 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
33257 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33259 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
33260 Author: Matthew McClintock <msm@freescale.com>
33261 Date: Wed Jun 28 10:43:00 2006 -0500
33263 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
33265 commit 5498d90312aad9f6bdbf047986027c35b03cd163
33266 Author: Matthew McClintock <msm@freescale.com>
33267 Date: Wed Jun 28 10:42:24 2006 -0500
33269 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
33271 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
33272 Author: Matthew McClintock <msm@freescale.com>
33273 Date: Wed Jun 28 10:41:37 2006 -0500
33275 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
33277 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
33278 Author: John Traill <john.traill@freescale.com>
33279 Date: Wed Aug 9 14:33:50 2006 +0100
33281 Add Rapidio support for the MPC8641HPCN
33283 Signed-off-by: John Traill <john.traill@freescale.com>
33285 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
33286 Author: John Traill <john.traill@freescale.com>
33287 Date: Tue Aug 8 11:32:43 2006 +0100
33289 Fix caslat calculation
33291 Signed-off-by: John Traill <john.traill@freescale.com>
33293 commit 709d3073e74153278e7904a70819bbef7df50e1a
33294 Author: Jon Loeliger <jdl@freescale.com>
33295 Date: Thu Aug 3 16:17:56 2006 -0500
33297 Convert to mac-address in ethernet nodes.
33299 commit 71748af833ca1017edf1415be376366ff2937d17
33300 Author: Haiying Wang <haiying.wang@freescale.com>
33301 Date: Fri Jul 28 12:41:35 2006 -0400
33303 Correct the irq value of DUART2
33305 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
33306 Author: Haiying Wang <haiying.wang@freescale.com>
33307 Date: Fri Jul 28 12:41:41 2006 -0400
33309 Change the space size of PEX IO in README
33311 commit 239db37c94f7a92941c4465feceb867c609241c5
33312 Author: Haiying Wang <haiying.wang@freescale.com>
33313 Date: Fri Jul 28 12:41:18 2006 -0400
33315 Move get_board_sys_clk to board directory
33317 commit 492900b985439fbce1a118afde1e35def870db03
33318 Author: John Traill <john.traill@freescale.com>
33319 Date: Fri Jul 28 09:03:54 2006 +0100
33321 Fix 8641HPCN pollution
33323 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
33324 Author: John Traill <john.traill@freescale.com>
33325 Date: Fri Jul 28 08:16:06 2006 +0100
33327 Fix 8641HPCN timebase
33329 commit c86360b830f1eecd7a72208575dde4f57879faea
33330 Author: Zhang Wei <wei.zhang@freescale.com>
33331 Date: Fri Jul 28 00:01:34 2006 +0800
33333 Fixed OF device tree of mpc86xxhpcn board.
33335 The changes works in with kernel irq mapping rework.
33337 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
33339 commit bea3f28d285942bf3f7ab339ce85178ded544225
33340 Author: Haiying Wang <haiying.wang@freescale.com>
33341 Date: Wed Jul 12 10:48:05 2006 -0400
33343 Add support for reading and writing mac addresses to or from ID EEPROM.
33345 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
33346 With attached patch, we can use command "mac/mac read/mac save/"
33347 to read and write EEPROM under u-boot prompt.
33349 U-boot will calculate the checksum of EEPROM while bootup,
33350 if it is right, then u-boot will check whether the mac address
33351 of eTSEC0/1/2/3 is availalbe (non-zero).
33353 If there is mac address availabe in EEPROM, u-boot will use it,
33354 otherewise, u-boot will use the mac address defined in
33355 MPC8641HPCN.h. This matches the requirement to set unique mac address
33356 for each TSEC port.
33358 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
33359 Signed-off-by: York Sun <yorksun@freescale.com>
33361 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
33362 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
33363 Date: Thu Jul 13 10:35:10 2006 -0500
33365 Fixed initrd issue by define big RAM
33367 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
33369 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
33370 Author: Jason Jin <Jason.jin@freescale.com>
33371 Date: Fri Jul 7 10:01:45 2006 -0500
33373 We made a u-boot patch to fix the hang up issue
33374 when booting filesystem from ramdisk.
33376 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
33378 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
33379 Author: Matthew McClintock <msm@freescale.com>
33380 Date: Wed Jun 28 10:47:03 2006 -0500
33382 * Switched default PCI speed for 8540 ADS back to 33MHz
33383 * Added comments and a printf to warn that PCI-X won't
33385 Patch by Andy Fleming 17-Mar-2006
33387 Signed-off-by: Andy Fleming <afleming@freescale.com>
33389 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
33390 Author: Matthew McClintock <msm@freescale.com>
33391 Date: Wed Jun 28 10:46:35 2006 -0500
33393 * Fixed a bug where 8555 PCI code used the old variable and
33395 Patch by Andy Fleming 17-Mar-2006
33397 Signed-off-by: Andy Fleming <afleming@freescale.com>
33399 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
33400 Author: Matthew McClintock <msm@freescale.com>
33401 Date: Wed Jun 28 10:46:13 2006 -0500
33403 * Added VIA configuration table
33404 * Added support for PCI2 on CDS
33405 Patch by Andy Fleming 17-Mar-2006
33407 Signed-off-by: Andy Fleming <afleming@freescale.com>
33409 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
33410 Author: Matthew McClintock <msm@freescale.com>
33411 Date: Wed Jun 28 10:45:41 2006 -0500
33413 * Fixed PCI memory definitions
33414 Patch by Andy Fleming 17-Mar-2006
33416 Signed-off-by: Andy Fleming <afleming@freescale.com>
33418 commit 087454609e47295443af793a282cddcd91a5f49c
33419 Author: Matthew McClintock <msm@freescale.com>
33420 Date: Wed Jun 28 10:45:17 2006 -0500
33422 * Added support for initializing second PCI bus on 85xx
33423 Patch by Andy Fleming 17-Mar-2006
33425 Signed-off-by: Andy Fleming <afleming@freescale.com>
33427 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
33428 Author: Matthew McClintock <msm@freescale.com>
33429 Date: Wed Jun 28 10:44:49 2006 -0500
33431 * Added PCI-X #defines for PCI-X initialization
33432 Patch by Andy Fleming on 17-Mar-2006
33434 Signed-off-by: Andy Fleming <afleming@freescale.com>
33436 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
33437 Author: Matthew McClintock <msm@freescale.com>
33438 Date: Wed Jun 28 10:44:23 2006 -0500
33440 * Made sure the code which disables prefetch for PCI devices
33441 sets the size of the prefetch region to 0
33442 Patch by Andy Fleming on 17-Mar-2006
33444 Signed-off-by: Andy Fleming <afleming@freescale.com>
33446 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
33447 Author: Matthew McClintock <msm@freescale.com>
33448 Date: Wed Jun 28 10:43:36 2006 -0500
33450 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
33451 Patch by Jon Loeliger 17-Jan-2006
33453 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33455 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
33456 Author: Matthew McClintock <msm@freescale.com>
33457 Date: Wed Jun 28 10:43:00 2006 -0500
33459 * Removed the oftree.dts for stxxtx in light of the changes
33460 to the flat device tree handling code
33461 Patch by Matthew McClintock 26-June-2006
33463 commit 1b380ec225665e73959677f3893dc658c5925e05
33464 Author: Matthew McClintock <msm@freescale.com>
33465 Date: Wed Jun 28 10:42:24 2006 -0500
33467 * Patch to modify ft_build.c to update flat device trees in place
33468 Patch by Matthew McClintock 26-June-2006
33470 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
33471 Author: Matthew McClintock <msm@freescale.com>
33472 Date: Wed Jun 28 10:41:37 2006 -0500
33474 * Modify bootm command to support booting with flat device trees
33475 Patch by Matthew McClintock 26-June-2006
33477 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
33478 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
33479 Date: Wed Jun 28 08:43:56 2006 -0500
33481 Change Id to symbolic name for RTL8139
33483 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33485 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
33486 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
33487 Date: Tue Jun 27 18:12:10 2006 +0800
33489 Fix RTL8139 in big endian
33491 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
33492 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
33494 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
33495 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
33496 Date: Tue Jun 27 18:12:23 2006 +0800
33498 Fix Tsec bug when no link
33500 When tftp a non-exist file from the tftp server, u-boot will check
33501 the link of all eth port. The original file will return wrong link
33502 state on the no link ports.
33504 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
33506 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
33507 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
33508 Date: Tue Jun 27 18:12:02 2006 +0800
33510 Fix bug for io_bar size during pci scan
33512 During the pci scan process, Some devices return bar_reponse with the
33513 highest bytes 0, such as the pci bridge in uli1575 return bar_response
33514 with 0xffffff, So the bar_size should be manually set under 64K.
33516 Signed-off-by: Jason Jin <jason.jin@freescale.com>
33518 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
33519 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
33520 Date: Tue Jun 27 18:11:54 2006 +0800
33522 Enable PCIE1 for MPC8641HPCN board
33524 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33526 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
33527 Author: Wolfgang Denk <wd@pollux.denx.de>
33528 Date: Mon Jun 26 11:06:00 2006 +0200
33532 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
33533 Author: Jon Loeliger <jdl@freescale.com>
33534 Date: Thu Jun 22 08:51:46 2006 -0500
33536 Fix bug in 8641hpcn reset command with no args.
33538 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
33539 Acked-by: Jon Loeliger <jdl@freescale.com>
33541 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
33542 Author: Zhang Wei <wei.zhang@freescale.com>
33543 Date: Tue Jun 20 17:47:15 2006 +0800
33545 Reworked IRQ mapping in OF-tree.
33547 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
33548 Author: Jon Loeliger <jdl@freescale.com>
33549 Date: Thu Jun 15 21:33:37 2006 -0500
33551 Do not enable address translation on secondary CPUs.
33552 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
33554 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33556 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
33557 Author: Wolfgang Denk <wd@pollux.denx.de>
33558 Date: Wed Jun 14 18:14:56 2006 +0200
33562 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
33563 Author: Wolfgang Denk <wd@pollux.denx.de>
33564 Date: Wed Jun 14 17:45:53 2006 +0200
33566 Various USB related patches
33567 - Add support for mpc8xx USB device.
33568 - Add support for Common Device Class - Abstract Control Model USB console.
33569 - Add support for flow control in USB slave devices.
33570 - Add support for switching between gserial and cdc_acm using environment.
33571 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
33572 - Update usbcore slightly to ease host enumeration.
33573 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
33574 - Add AdderUSB_config as a defconfig to enable usage of the USB console
33575 by default with the Adder87x U-Boot port.
33576 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
33578 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
33579 Author: Jon Loeliger <jdl@jdl.com>
33580 Date: Wed Jun 7 10:53:55 2006 -0500
33582 Fix a get_board_sys_clk() use-before-def warning.
33584 Signed-off-by: Jon Loeliger <jdl@jdl.com>
33586 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
33587 Author: Jon Loeliger <jdl@jdl.com>
33588 Date: Wed Jun 7 10:52:49 2006 -0500
33590 Allow DTC path to be passed in.
33592 Signed-off-by: Jon Loeliger <jdl@jdl.com>
33594 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
33595 Author: Haiying Wang <haiying.wang@freescale.com>
33596 Date: Tue Jun 6 16:54:29 2006 -0400
33598 Modify the IRQ of DUART2
33600 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
33601 Author: Jon Loeliger <jdl@jdl.com>
33602 Date: Wed May 31 13:55:35 2006 -0500
33606 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33608 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
33609 Author: Jon Loeliger <jdl@jdl.com>
33610 Date: Wed May 31 12:44:44 2006 -0500
33612 White space cleanup.
33613 Some 80-column cleanups.
33614 Convert printf() to puts() where possible.
33615 Use #include "spd_sdram.h" as needed.
33616 Enhanced reset command usage message a bit.
33618 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33620 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
33621 Author: Jon Loeliger <jdl@jdl.com>
33622 Date: Wed May 31 11:39:34 2006 -0500
33624 Removed unneeded local_bus_init() from 8641HPCN board.
33626 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33628 commit 4d3d729c16c392d2982d3266b659d333c927697d
33629 Author: Jon Loeliger <jdl@jdl.com>
33630 Date: Wed May 31 11:24:28 2006 -0500
33632 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
33634 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33636 commit b2a941de060350ad15878d8219825f4950e9bb8e
33637 Author: Jon Loeliger <jdl@jdl.com>
33638 Date: Wed May 31 10:07:28 2006 -0500
33640 Remove dead debug code.
33642 Signed-off-by: Jon Loeliger <jdl@jdl.com>
33644 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
33645 Author: Jon Loeliger <jdl@freescale.com>
33646 Date: Tue May 30 17:47:00 2006 -0500
33648 Move mpc86xx PIXIS code to board directory
33650 First cut at moving the PIXIS platform code out of
33651 the 86xx cpu directory and into board/mpc8641hpcn
33654 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33656 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
33657 Author: Markus Klotzbuecher <mk@denx.de>
33658 Date: Tue May 30 16:56:14 2006 +0200
33660 Support generic OHCI support for the s3c24x0 cpu.
33662 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
33663 Author: Haiying Wang <Haiying.Wang@freescale.com>
33664 Date: Tue May 30 09:10:32 2006 -0500
33666 Improve "reset" command's interaction with watchdog.
33668 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
33669 "reset altbank wd" will reset another bank WITH watch dog enabled
33670 "diswd" will disable watch dog after u-boot boots up successfully
33672 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
33674 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
33675 Author: Haiying Wang <Haiying.Wang@freescale.com>
33676 Date: Tue May 30 08:51:19 2006 -0500
33678 Fix two SDRAM setup bugs.
33681 Enable 1T/2T based on number of DIMMs present.
33683 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
33685 commit d11fec5015334deb2010e36ce00bb118cc5429a5
33686 Author: Haiying Wang <Haiying.Wang@freescale.com>
33687 Date: Fri May 26 10:24:48 2006 -0500
33689 Add first draft of the MPC8641HPCN doc/README.
33691 Signed-off-by: Jon Loeliger <jdl@jdl.com>
33693 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
33694 Author: Haiying Wang <Haiying.Wang@freescale.com>
33695 Date: Fri May 26 10:13:04 2006 -0500
33697 Added pci@8000 block.
33698 Updated ethernet interrupt mappings (moved up 48).
33699 Cleaned up a few comments.
33701 Signed-off-by: Jon Loeliger <jdl@jdl.com>
33703 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
33704 Author: Haiying Wang <Haiying.Wang@freescale.com>
33705 Date: Fri May 26 10:01:16 2006 -0500
33707 Allow args on reset command.
33709 Signed-off-by: Jon Loeliger <jdl@jdl.com>
33711 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
33712 Author: Markus Klotzbuecher <mk@denx.de>
33713 Date: Tue May 23 13:38:35 2006 +0200
33715 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
33716 fixes to the latter.
33718 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
33719 Author: Markus Klotzbuecher <mk@denx.de>
33720 Date: Tue May 23 10:33:11 2006 +0200
33722 More cleanup for the delta board and the generic usb_ohci driver. Added
33723 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
33724 initialization and cleanup hooks respectively.
33726 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
33727 Author: Markus Klotzbuecher <mk@denx.de>
33728 Date: Mon May 22 16:33:54 2006 +0200
33730 This patch adds USB storage support for the delta board. This is the first
33731 board to make use of a generic OHCI driver, that calls hooks for board
33732 dependant initialization.
33734 commit 14e37081ff3cac7ebe6e93836523429853b6b292
33735 Author: Jon Loeliger <jdl@jdl.com>
33736 Date: Fri May 19 13:28:39 2006 -0500
33738 Change arbitration to round-robin for SMP linux.
33740 commit 9a655876e5995be80f49054e2509500e871e4d3a
33741 Author: Jon Loeliger <jdl@jdl.com>
33742 Date: Fri May 19 13:26:34 2006 -0500
33744 Enable dual DDR controllers and interleaving.
33746 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
33747 Author: Jon Loeliger <jdl@jdl.com>
33748 Date: Fri May 19 13:22:44 2006 -0500
33750 Update 86xx address map and LAWBARs.
33752 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
33753 Author: Jon Loeliger <jdl@jdl.com>
33754 Date: Fri May 19 13:14:15 2006 -0500
33756 Remove L2 Cache invalidate polling.
33758 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
33759 Author: Jon Loeliger <jdl@jdl.com>
33760 Date: Fri May 19 12:33:09 2006 -0500
33762 Enable 2nd CPU and I2C.
33764 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
33765 Author: Jon Loeliger <jdl@freescale.com>
33766 Date: Mon May 15 07:26:56 2006 -0500
33768 Update interrupt mapping.
33770 commit 6cfea33477b04b63ed47386ed1629529484c33ba
33771 Author: Haiying Wang <Haiying.Wang@freescale.com>
33772 Date: Wed May 10 09:38:06 2006 -0500
33774 Remove unneeded INIT_RAM_LOCK cache twiddling.
33775 Correctly tracks r29 as global data pointer now.
33777 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
33779 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
33780 Author: Jon Loeliger <jdl@freescale.com>
33781 Date: Wed May 10 09:33:07 2006 -0500
33783 Remove unnecessary flash.c file.
33785 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
33786 Author: Jon Loeliger <jdl@freescale.com>
33787 Date: Tue May 9 08:23:49 2006 -0500
33789 Get MPC8641HPCN flash images working.
33791 Enable the CFI driver.
33792 Remove bogus LAWBAR7 cruft.
33793 Use correct TEXT_BASE, Fixup load script.
33794 Enable SPD EEPROM during DDR setup.
33795 Use generic RFC 1918 IP addresses by default.
33797 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
33798 Author: Jon Loeliger <jdl@freescale.com>
33799 Date: Thu Apr 27 10:15:16 2006 -0500
33801 Cleanup whitespaces and style issues.
33802 Removed //-style comments.
33803 Use 80-column lines.
33804 Remove trailing whitespace.
33805 Remove dead code and debug cruft.
33807 commit a2320a6bf8113a09544c42d160d10ac69d049a03
33808 Author: Jon Loeliger <jdl@freescale.com>
33809 Date: Thu Apr 27 08:22:39 2006 -0500
33811 Revert bad PCI prefetch limit change.
33813 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
33814 Author: Jon Loeliger <jdl@freescale.com>
33815 Date: Wed Apr 26 17:58:56 2006 -0500
33817 Initial support for MPC8641 HPCN board.