1 commit ad74cae9ff8790727bc81ee91c6bca7d50dca446
2 Author: David Brownell <dbrownell@users.sourceforge.net>
3 Date: Thu Apr 16 23:15:15 2009 -0700
5 dm9000 EEPROM reading bugfix
7 Make the U-Boot dm9000 driver read addresses from EEPROM just
8 like Linux does ... read six bytes, instead of reading twelve
9 bytes and then discarding every other one.
11 Using the right Ethernet address is a big win.
13 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
14 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15 Acked-by: Ben Warren <biggerbadderben@gmail.com>
17 commit d4c02e6f5d49880123e7f584b88f857ffd874381
18 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
19 Date: Wed Feb 25 14:27:24 2009 +0900
21 rtl8169: fix cache coherency problem
23 Fix the problem that cannot access actual data when CPU data cache enabled.
25 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
26 Tested-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
27 Acked-by: Ben Warren <biggerbadderben@gmail.com>
29 commit 34b76a14f676bc6501c27a96564e4dfb4793f033
30 Author: Wolfgang Denk <wd@denx.de>
31 Date: Sun Apr 26 20:39:26 2009 +0200
33 lib_arm/board.c: remove misleading "test-only" comment.
35 For a long time, the print_cpuinfo() declaration in lib_arm/board.c
36 had been marked as "test-only", which is plain wrong considering
37 current usage. Delete this misleading comment.
39 Signed-off-by: Wolfgang Denk <wd@denx.de>
41 commit 14b9308d511b53042ef478936e367a67282df66a
42 Author: Heiko Schocher <hs@denx.de>
43 Date: Fri Apr 24 06:50:45 2009 +0200
45 83xx: searching "muram-data" by compatible property
47 if using CONFIG_BOOTCOUNT_LIMIT feature on a MPC8360 CPU
48 in the muram-data node, the reg entry needs to be updated.
49 This is done in fdt_fixup_muram(), but we should use
50 the compatible "fsl,qe-muram-data" for searching the
51 node instead of searching the muram-data node with
54 Signed-off-by: Heiko Schocher <hs@denx.de>
55 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
57 commit 8e15088794807944b221c11609d36789efc7f767
58 Author: Anatolij Gustschin <agust@denx.de>
59 Date: Thu Apr 23 21:29:34 2009 +0200
61 mpc83xx: MPC8360ERDK: fix environment offset configuration bug
63 The size of U-Boot binary for MPC8360ERDK increased
64 (> 2 flash sectors now), so 'saveenv' will partially
65 overwrite U-Boot in flash and will brick the board.
66 This patch moves environment offset to fourth flash
67 sector and also fixes CONFIG_SYS_MONITOR_LEN.
69 Signed-off-by: Anatolij Gustschin <agust@denx.de>
70 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
72 commit 3c172c4fdbbb5858fae38478d6399be4a16be3fc
73 Author: Michael Zaidman <michael.zaidman@gmail.com>
74 Date: Sat Apr 4 01:43:00 2009 +0300
76 NetLoop initialization bug
78 The patch fixes the bug of partial initialization of global network
81 Upon u-boot's start up the first ping command causes a failure of the
82 consequent TFTP command. It happens in the recently added mechanism of
83 the NetLoop initialization where initialization of global network
84 parameters is separated in the NetInitLoop routine which is called per
85 env_id change. Thus, ping request will initialize the network parameters
86 necessary for ping operation only, afterwards the env_changed_id will be
87 set to the env_id that will prevent all following initialization requests
89 The problem is that the initialized by ping subset of network parameters
90 is not sufficient for other protocols and particularly for TFTP which
91 requires the NetServerIp also.
93 Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
94 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
96 commit b11f664f52c2855990107c18f242223377183575
97 Author: Timur Tabi <timur@freescale.com>
98 Date: Thu Apr 9 10:27:05 2009 -0500
100 net: fix ULI 526x macro usage in netdev.h
102 Change netdev.h to use CONFIG_ULI526X instead of CONFIG_ULI526. CONFIG_ULI526X
103 is used everywhere else, so that's the correct macro name. Without this fix,
104 Ethernet will not work on the Freescale MPC8610 HPCD.
106 Signed-off-by: Timur Tabi <timur@freescale.com>
107 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
109 commit 7ee38c044ca5041d3378d6507580ea4ec344af96
110 Author: David Brownell <dbrownell@users.sourceforge.net>
111 Date: Sun Apr 12 15:38:06 2009 -0700
113 fix DaVinci NS16550_REG_SIZE regression
115 Update the DaVinci DM6446 boards to use the new convention
116 for CONFIG_SYS_NS16550_REG_SIZE ... the size hasn't changed
117 from the original 4 bytes, but these chips are little-endian.
119 (Resolves a regression added recently by the include/ns16550.h
120 patch to "Unify structure declaration for registers". The code
121 previously worked just fine because the registers were accessed
122 as host-endian words, not as bytes.)
124 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
126 commit dfc99e143fca44a492918ac6cf3f76ee9c2473a9
127 Author: Mike Frysinger <vapier@gentoo.org>
128 Date: Sun Apr 12 22:29:20 2009 -0400
130 cmd_nand: drop duplicate NULL ptr check
132 The first if statement checks for NULL ptrs, so there is no need to check
133 it again in later else cases (such as .oob).
135 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
136 CC: Scott Wood <scottwood@freescale.com>
138 commit 7732cef2eeb4e339cfcd8553fab773af73a20805
139 Author: David Brownell <dbrownell@users.sourceforge.net>
140 Date: Mon Apr 13 08:03:38 2009 -0700
142 CMD_UBI != MTD_PARTITIONS
144 Fix dependency goofage: it should certainly be possible to have the
145 partition support without bringing in UBI commands.
147 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
148 Acked-by: Stefan Roese <sr@denx.de>
150 commit 6ebff365eb63093ca35b687316002535c6a18820
151 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
152 Date: Thu Apr 16 21:30:48 2009 +0200
154 at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
156 The timer has been rewrote with a precision at ~0,18%
158 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
159 Tested-by: Sergey Lapin <slapin@ossfans.org>
160 Tested-by: Eric BENARD <ebenard@free.fr>
162 commit f0a2c7b4b64eacd06bb272856bcc056be8719f5a
163 Author: Ilko Iliev <iliev@ronetix.at>
164 Date: Thu Apr 16 21:30:48 2009 +0200
166 at91: add support for the PM9263 board of Ronetix GmbH
168 The PM9263 board is based on the AT91SAM9263-EK board.
170 Here is the page on Ronetix website:
171 http://www.ronetix.at/starter_kit_9263.html
173 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
174 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
176 commit dc39ae9513c32dfeb9e018dc0d22c6484514fefb
177 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
178 Date: Thu Apr 16 21:30:44 2009 +0200
180 at91sam9/at91cap: improve clock framework
182 calculate dynamically the clock rate and pllb setting for usb
184 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
186 commit dd7c302099ef5590069bdbf292aaa8230cd59de7
187 Author: Stefan Roese <sr@denx.de>
188 Date: Wed Apr 15 14:08:48 2009 +0200
190 ppc4xx: Disable POST memory test on NAND-booting Kilauea
192 Don't run the memory POST on the NAND-booting version. It will
193 overwrite part of the U-Boot image which is already loaded from NAND
194 to SDRAM. We were just lucky that it booted at all with this SDRAM
197 Signed-off-by: Stefan Roese <sr@denx.de>
199 commit 9a929170be89b27bce677504da27e88600c06c49
200 Author: Stefan Roese <sr@denx.de>
201 Date: Wed Apr 15 14:06:26 2009 +0200
203 ppc4xx: Disable POST memory test on NAND-booting Sequoia
205 Don't run the memory POST on the NAND-booting version. It will
206 overwrite part of the U-Boot image which is already loaded from NAND
207 to SDRAM. We were just lucky that it booted at all with this SDRAM
210 Signed-off-by: Stefan Roese <sr@denx.de>
212 commit 17c1b0e89b8be7d90f605eb19af9218c6275bfb3
213 Author: Stefan Roese <sr@denx.de>
214 Date: Wed Apr 15 11:32:53 2009 +0200
216 ppc4xx: Remove unused code for Sequoia NAND booting version
218 The current define of get_bus_freq() in the CONFIG_NAND_SPL #ifdef is not
219 used at all. This patch changes it's define to the currently used value of
220 133333333 and removes the unnecessary code.
222 Signed-off-by: Stefan Roese <sr@denx.de>
224 commit cf9409885cbe01405bad76790e99f8adf3351f4d
225 Author: Stefan Roese <sr@denx.de>
226 Date: Wed Apr 15 10:50:48 2009 +0200
228 ppc4xx: Add "booting from NAND" to 4xx NAND-booting targets
230 This additional text in the bootup log helps to see if the board is
231 configured for NAND-booting. Especially helpful for boards that can
232 boot from NOR and NAND (e.g. most of the AMCC eval boards).
234 Signed-off-by: Stefan Roese <sr@denx.de>
236 commit 5132106a27b8fb302677852b26ffd319b40d17e2
237 Author: Stefan Roese <sr@denx.de>
238 Date: Wed Apr 8 10:36:22 2009 +0200
240 ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia
242 Currently the NOR & NAND support in Linux only works for the "standard"
243 Sequoia, the version booting for NOR flash. The NAND-booting version
244 has the chip-selects swapped. Here the chip-select mappings:
246 "Standard" NOR-booting version:
250 NAND-booting version:
254 With this path the dtb gets fixed-up, so that the correct chip-select
255 numbers are patched in the dtb enabling correct NOR & NAND support
256 in Linux on the NAND-booting Sequoia version.
258 Signed-off-by: Stefan Roese <sr@denx.de>
260 commit aad4eca4ba8d597747199d8af723426681557dda
261 Author: Mike Frysinger <vapier@gentoo.org>
262 Date: Sat Apr 4 09:10:27 2009 -0400
264 Blackfin: audit UART for all known anomalies
266 There is no code change here, just new comments, but this keeps me from
267 having to do another audit from scratch in the future.
269 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
271 commit 8ef929afa43c77c9573caa57c6e17a97a33775c0
272 Author: Mike Frysinger <vapier@gentoo.org>
273 Date: Sat Apr 4 08:40:13 2009 -0400
275 Blackfin: add check for anomaly 05000362
278 The column address width settings for banks 2 and 3 are misconnected in
279 the SDRAM controller. Accesses to bank 2 will result in an error if the
280 Column Address Width for bank 3 (EB3CAW ) is not set to be the same as
284 If using bank 2, make sure that banks 2 and 3 have the same column address
285 width settings in the EBIU_SDBCTL register. This must be the case
286 regardless of whether or not bank 3 is enabled.
288 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
290 commit c2e07449f546fb375289cdac1a608fdc20357873
291 Author: Mike Frysinger <vapier@gentoo.org>
292 Date: Sat Apr 4 08:29:55 2009 -0400
294 Blackfin: add comment about anomaly 05000430 avoidance
296 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
298 commit 48ab1509254a4c175e4f65c478a978928ffe09ec
299 Author: Mike Frysinger <vapier@gentoo.org>
300 Date: Sat Apr 4 08:10:22 2009 -0400
302 Blackfin: add workaround for anomaly 05000242
305 If the DF bit is set prior to a hardware reset, the PLL will continue to
306 divide CLKIN by 2 after the hardware reset, but the DF bit itself will be
307 cleared in the PLL_CTL register.
310 Reprogram the PLL with DF cleared if the desire is to not divide CLKIN by
313 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
315 commit ce1fe4ba6bb9df7c57351436fa17d1af8bbe7916
316 Author: Mike Frysinger <vapier@gentoo.org>
317 Date: Sat Apr 4 08:09:24 2009 -0400
319 Blackfin: add workaround for anomaly 05000171
322 The Boot ROM is executed at power up/reset and changes the value of the
323 SICA_IWR registers from their default reset value of 0xFFFF, but does not
327 User code should not rely on the default value of these registers. Set
328 the desired values explicitly.
330 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
332 commit 51ee6e057f7a920e2a125cd9f985d10f625e355f
333 Author: Mike Frysinger <vapier@gentoo.org>
334 Date: Sat Apr 4 08:22:36 2009 -0400
336 Blackfin: update anomaly sheets
338 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
340 commit a343ba87ea0320ca0a4ecfa2c42cd9d4f18883df
341 Author: Graf Yang <graf.yang@analog.com>
342 Date: Sat Apr 4 07:45:57 2009 -0400
344 Blackfin: nand: flush peripheral before polling it
346 We need to make sure the data written to the nand flash controller makes
347 it there before we start polling its status register. Otherwise, we may
348 get stale data and return before the controller is actually ready.
350 Signed-off-by: Graf Yang <graf.yang@analog.com>
351 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
352 Acked-by: Scott Wood <scottwood@freescale.com>
354 commit 3ccbfb25f48af78e7092ac75f3115e924e76c748
355 Author: Remy Bohmer <linux@bohmer.net>
356 Date: Sun Apr 5 11:43:28 2009 +0200
358 Support for PXA27X UDC.
360 This Patch adds Support for PXA27X UDC.
361 (Rebased to drivers/usb reorganisation)
363 Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
364 Signed-off-by: Remy Bohmer <linux@bohmer.net>
366 commit 2731b9a86685190d26b1883f27afda5ac8e1a313
367 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
368 Date: Fri Apr 3 12:46:58 2009 +0200
370 drivers/usb: regorganisation
372 move to linux usb driver organisation
380 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
381 Signed-off-by: Remy Bohmer <linux@bohmer.net>
383 commit d04371a116d102e587ba7aa4c329b441cdbea3f4
384 Author: Todor I Mollov <tmollov@ucsd.edu>
385 Date: Sat Apr 4 06:53:06 2009 -0400
387 Blackfin: spi: make cs deassert function deterministic
389 Blackfin SPI driver was not driving the SPI chip-select high before
390 putting the chip-select signals into tri-state mode. This is probably
391 something that slipped by unnoticed in most designs. If the signals are
392 put directly into a tri-state mode, then the board is relying on the
393 pull-up resistors to pull up the chip-select before the next transaction.
394 Most of the time this is fine, except when you have two transactions that
395 follow each other very closely, such as the flash erase and read status
396 register commands. In this case I was seeing a 500ns separation between
397 the transactions. In my setup, with a 10kOhm pull-up, it would meet
398 timing spec about half the time and resulted in intermittent errors. (A
399 stronger pull up would fix this, but our design is targeted for low power
400 consumption and a 3.3kOhm @ 3.3v is 3.3mW of needless power consumption.)
401 I modified the spi_cs_deactivate() function in bfin_spi.c to drive the
402 chip-selects high before putting them into tri-state. For me, this
403 resulted in a rise time of 5ns instead of the previous rise time of about
404 1us, and fully satisfied the timing spec of the chip.
406 Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
407 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
409 commit c6fadb9c73a6a3e0c7f20696e978304a593a8d2d
410 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
411 Date: Sat Dec 13 21:08:05 2008 +0100
413 integratorap: fix PCI support
415 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
417 commit 1c397508c836dfcb01fb2471c71de0727051f117
418 Author: Dirk Behme <dirk.behme@googlemail.com>
419 Date: Mon Mar 30 21:15:23 2009 +0200
421 OMAP3: Update Overo pin mux for new expansion board
423 A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and
424 switches. This patch changes the pinmux configuration for those pins.
425 They were previously set up for unused MMC3_DAT4-7.
427 Signed-off-by: Steve Sakoman <steve@sakoman.com>
428 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
430 commit ab298231518675b3784aea88ee9b978438f99e63
431 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
432 Date: Sun Apr 5 13:08:03 2009 +0200
434 arm: unify reset command
436 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
438 commit b3acb6cd4059dfb29a5e99095d802717f53ff784
439 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
440 Date: Sun Apr 5 13:06:31 2009 +0200
442 arm: clean cache management
444 unify arm cache management except for non standard cache as ARM7TDMI
446 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
448 commit 677e62f43235de9a1701204d7bcea0fb3d233fa1
449 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
450 Date: Sun Apr 5 13:02:43 2009 +0200
452 arm: update co-processor 15 access
454 import system.h from linux
456 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
458 commit 23e4af49e066a53cd3e3659b68ef90572d88de84
459 Author: Guennadi Liakhovetski <lg@denx.de>
460 Date: Sun Apr 5 00:42:02 2009 +0200
462 ARM: add the imx31_phycore_eet target to MAINTAINERS
464 imx31_phycore_eet is a variant of the imx31_phycore board with a few
465 extensions, which justifies a separate entry in the MAINTAINERS list,
466 whereas normally all entries sharing a single configuration file and a
467 board/ directory have only one entry in MAINTAINERS.
469 Reported-by: Wolfgang Denk <wd@denx.de>
470 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
472 commit 69c5bf29908b3a7f8e23bd9891b7ecc5b21f23e5
473 Author: Guennadi Liakhovetski <lg@denx.de>
474 Date: Sun Apr 5 00:37:07 2009 +0200
476 ARM: fix out-of-tree build of imx31_phycore_eet
478 Fix out-of-tree build of the imx31_phycore_eet target.
480 Reported-by: Wolfgang Denk <wd@denx.de>
481 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
483 commit 3c853f31d6a8e4407f73a2ca2c63d383a245f237
484 Author: Jon Smirl <jonsmirl@gmail.com>
485 Date: Sat Apr 4 17:44:51 2009 -0400
487 mpc5200: reduce delays in i2c
489 The previous code waited 1000us before checking i2c
490 status. Measurement shows i2c is usually ready in
491 under 50us. Change the polling interval to 15us,
492 loop 6,667 times to keep the polling timeout constant
495 commit 36003268968949110ef145d9f2eaf8439c96d25b
496 Author: Sanjeev Premi <premi@ti.com>
497 Date: Fri Apr 3 14:00:07 2009 +0530
499 OMAP: Fix compile issue
501 Fixes this compile error:
502 board.c: In function 'do_switch_ecc':
503 board.c:339: error: 'cmd_tbl_t' has no member named 'help'
504 make[1]: *** [board.o] Error 1
505 make[1]: Leaving directory `/db/psp_git/users/a0756819/u-boot/cpu/arm_cortexa8/omap3'
506 make: *** [cpu/arm_cortexa8/omap3/libomap3.a] Error 2
508 This is due to the fact that current command uses long
509 help for the usage print even if the CONFIG_SYS_LONGHELP
510 is not enabled. (Thanks Jean-Christophe for explanation).
512 Signed-off-by: Sanjeev Premi <premi@ti.com>
514 commit 342c1a5d9ab74febf3226a86216dc5aa05295d46
515 Author: Minkyu Kang <mk7.kang@samsung.com>
516 Date: Fri Apr 3 09:56:16 2009 +0900
518 s3c64xx: fix the wrong gpio offset
520 This patch fix the wrong gpio offset
522 Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
524 commit ab0689c316c9b2ee33f4de1c50263b64e539f12a
525 Author: Kyungmin Park <kmpark@infradead.org>
526 Date: Wed Nov 26 10:18:13 2008 +0900
528 Move machine specific code to board at s3c64xx (v2)
530 Move machine specific code to smdk6400.
531 Some board use OneNAND instead of NAND.
533 Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w.
534 So it's better to use macro instead of hard-coded value.
536 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
538 commit 767f3acd9f6e1dcb8ada926c333945382eddc7e8
539 Author: Tom Rix <Tom.Rix@windriver.com>
540 Date: Wed Apr 1 22:02:19 2009 -0500
542 ZOOM1 Remove legacy NAND defines
544 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
546 commit 5891151707ee5902fe62d554c247f42865815757
547 Author: Tom Rix <Tom.Rix@windriver.com>
548 Date: Wed Apr 1 22:02:20 2009 -0500
550 OMAP3 Fix multiline formatting in board init files.
552 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
554 commit c0a14aedc3440d6591b8c86d45861a0a8b46e11d
555 Author: Wolfgang Denk <wd@denx.de>
556 Date: Sun Apr 5 00:27:57 2009 +0200
558 Update CHANGELOG, coding style cleanup.
560 commit f63728c804ab7413a67d70f6774cd30c3f7b40fb
561 Author: Wolfgang Denk <wd@denx.de>
562 Date: Sun Apr 5 00:18:44 2009 +0200
564 One more fix for building env_embedded.o
566 In addition to the changes for CONFIG_ENV_IS_IN_FLASH as done in
567 commit afcbce07, we also need to do the same for
568 CONFIG_ENV_IS_IN_EEPROM and CONFIG_ENV_IS_IN_NVRAM.
570 Signed-off-by: Wolfgang Denk <wd@denx.de>
572 commit e3d1ac7bb1955d36980d267cb4cec40b0f7d30b5
573 Author: Scott Wood <scottwood@freescale.com>
574 Date: Thu Apr 2 16:15:10 2009 -0500
576 common/image.c: Relocate strings in tables.
578 Without this, u-boot can crash or print garbage if the original link
579 address no longer points to a valid string.
581 Signed-off-by: Scott Wood <scottwood@freescale.com>
583 commit 3a671fc06ae1d9e8eba76600372317c75ae0eb3e
584 Author: Scott Wood <scottwood@freescale.com>
585 Date: Thu Apr 2 16:10:36 2009 -0500
587 mpc8260: Fill in brg's clock-frequency in device tree.
589 Signed-off-by: Scott Wood <scottwood@freescale.com>
591 commit c73ed274a211699739d83c2cef92853dc6716e15
592 Author: Scott Wood <scottwood@freescale.com>
593 Date: Thu Apr 2 18:20:43 2009 -0500
595 MPC8260ADS: Add nfsboot/ramboot to default environment.
597 This brings it in line with other Freescale boards.
599 Signed-off-by: Scott Wood <scottwood@freescale.com>
601 commit c203ef5db0476a8c4f6dd86b2e9e9db0ea973f84
602 Author: Andreas Huber <andreas.huber@keymile.com>
603 Date: Thu Apr 2 17:15:34 2009 +0200
605 UBI/cfi-mtd: Fix mtd name for multiple chips
607 On platforms with multiple NOR chips, currently only the first one
608 can be selected using the "ubi part" command. This patch fixes this
609 problem by using different names for the NOR "mtd devices".
611 It also changes the name of the NOR MTD device from "cfi-mtd" to
612 "norX" (X indexing the device numer) to better match the mtdparts
615 Signed-off-by: Stefan Roese <sr@denx.de>
616 Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
618 commit 6b6bb02f27fcabfb37ea717fb7e243248e1e2acf
619 Author: Peter Korsgaard <jacmet@sunsite.dk>
620 Date: Tue Mar 31 17:52:16 2009 +0200
622 tools/setlocalversion: use git svn instead of git-svn
624 Use the new "git <subcmd>" syntax instead of the deprecated
627 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
629 commit 7fa96a9a54eb0d87d73888ec2565cda790ba0dff
630 Author: Mingkai Hu <Mingkai.hu@freescale.com>
631 Date: Tue Mar 31 14:09:40 2009 +0800
633 eSPI: add the eSPI register support
635 Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
637 commit 869f6bf4def5a053fbd1aecd8b2fc36f05196c0b
638 Author: Minkyu Kang <mk7.kang@samsung.com>
639 Date: Mon Mar 30 14:55:51 2009 +0900
641 cmd_mmc: add support for device command for selecting mmc device
643 This patch improves device command for selecting mmc device
645 Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
647 commit 9abc9ef8fbe079bf75a634ce64b7dcdb7b0d8bdc
648 Author: Alan Carvalho de Assis <acassis@gmail.com>
649 Date: Sat Mar 28 19:50:16 2009 -0300
651 Small fix to m5282evb
653 This is just a small fix to get u-boot on m5282evb.
655 Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
657 commit febd7e4174e54579c9aa165c85c519fe5288f9d2
658 Author: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
659 Date: Fri Mar 27 10:21:14 2009 +0100
661 UBIFS: add R/O compatibility
663 Now UBIFS is supported by u-boot. If we ever decide to change the
664 media format, then people will have to upgrade their u-boots to
665 mount new format images. However, very often it is possible to
666 preserve R/O forward-compatibility, even though the write
667 forward-compatibility is not preserved.
669 This patch introduces a new super-block field which stores the
670 R/O compatibility version.
672 Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
673 Acked-by: Adrian Hunter <Adrian.Hunter@nokia.com>
674 Signed-off-by: Stefan Roese <sr@denx.de>
676 commit 852dbfdd56f68eb67d138b306a64e4de58dabb91
677 Author: Mike Frysinger <vapier@gentoo.org>
678 Date: Mon Mar 23 22:27:34 2009 -0400
680 more command usage cleanup
682 Fix up a few dangling commands like in "Command usage cleanup" commit.
684 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
686 commit b93b24bf76f8a8220b236df3a5f30b2204eb4edc
687 Author: Ladislav Michl <ladis@linux-mips.org>
688 Date: Mon Mar 23 12:06:07 2009 +0100
690 Separate mtdparts command from jffs2
692 On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
693 > Currently the mtdparts commands are included in the jffs2 command support.
694 > This doesn't make sense anymore since other commands (e.g. UBI) use this
695 > infrastructure as well now. This patch separates the mtdparts commands from
696 > the jffs2 commands making it possible to only select mtdparts when no JFFS2
699 ... and to make it useful for NAND chips as well, we should also remove now
700 unrelated CONFIG_JFFS2_NAND. Note that struct part_info etc is in
701 jffs2/load_kernel.h which is a bit misleading filename for that purpose,
702 but that can be fixed later (tm).
704 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
706 commit b196ca75503ce307c535b87bf47d51f05e7530df
707 Author: Mike Frysinger <vapier@gentoo.org>
708 Date: Sun Mar 22 22:18:01 2009 -0400
710 smc91111_eeprom: move board-specific init into SMC91111_EEPROM_INIT()
712 Rather than sticking Blackfin-specific stuff into the eeprom example, use
713 an indirect macro so that any board can override it with their own magic
714 sauce in their board config file.
716 Also fix some spurious semi-colons in defines while I'm at it ...
718 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
719 CC: Ben Warren <biggerbadderben@gmail.com>
721 commit f5cf2ef2ad2a8bf321712ab460ed846120163d74
722 Author: Sascha Hauer <s.hauer@pengutronix.de>
723 Date: Sat Mar 21 09:38:46 2009 -0400
725 mpc52xx phy: initialize only when needed
727 Do not initialize phy on startup, instead initialize it
728 when we actually need it.
730 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
732 commit 03bab0091948196b9558248684c04f60943ca4b5
733 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
734 Date: Mon Mar 30 16:51:40 2009 +0200
736 at91sam9263ek: enable hush and auto complete support
738 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
739 Acked-by: Stelian Pop <stelian@popies.net>
741 commit 4758ebdd53571d4d183be5c2db8f0ee4ef368915
742 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
743 Date: Fri Mar 27 23:26:44 2009 +0100
745 at91: move dataflash spi driver to drivers/spi
747 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
749 commit 2b7178afce59f71e95da657273f4132012098c1f
750 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
751 Date: Fri Mar 27 23:26:44 2009 +0100
753 at91: move usb driver to drivers/usb
755 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
757 commit f82518d7f443ebac5f8821103a3c521c963aa6ee
758 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
759 Date: Fri Mar 27 23:26:43 2009 +0100
761 at91rm9200: Reset update
763 Update the rm9200 reset sequence to try executing a board-specific reset
764 function and move specific board reset to board.
766 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
768 commit 3524049cd053746298e4cfab2449882e75c146fc
769 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
770 Date: Fri Mar 27 23:26:43 2009 +0100
772 at91rm9200: move serial shutdown code to serial drivers
774 introduce serial_exit for this purpose. Use it only when the rm9200
775 serial driver is active
777 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
779 commit beebd851cdbc9dd070bcdfec1fd8f17e3cc91bc0
780 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
781 Date: Fri Mar 27 23:26:43 2009 +0100
783 at91rm9200: move serial driver to drivers/serial
785 add CONFIG_AT91RM9200_USART to activate the driver
787 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
789 commit cb82a532669f6b02225ec3429ea4d49ff2b97d0a
790 Author: Ulf Samuelsson <ulf@atmel.com>
791 Date: Fri Mar 27 23:26:43 2009 +0100
793 Add support for the AT91RM9200EK Board.
795 The AT91RM9200-EK Evaluation Board supports the AT91RM9200
796 ARM9-based 32-bit RISC microcontroller and enables real-time code development
799 Here is the chip page on Atmel website:
800 http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507
809 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
810 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
812 commit b9c0e4c29e3ec12668ac50e954e7c9ba8f7aa10a
813 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
814 Date: Fri Mar 27 23:26:42 2009 +0100
816 add dataflash mmc mux missing support
818 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
820 commit 2a325ce3c705ab2d82760afc541c511328472df8
821 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
822 Date: Fri Mar 27 23:26:42 2009 +0100
824 at91rm9200dk: Move conditional compilation to Makefile
826 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
828 commit 90a92a708d5180a20d600ba0fc2352ec76dc3829
829 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
830 Date: Fri Mar 27 23:26:42 2009 +0100
832 at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECT
834 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
836 commit 843a2654bce74192de2b5a43474fdc27a572ab40
837 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
838 Date: Fri Mar 27 23:26:42 2009 +0100
840 at91sam9: add watchdog support
842 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
843 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
845 commit a47492ac60657dd9d59c713aa049319ea6eabd52
846 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
847 Date: Fri Mar 27 13:14:52 2009 +0100
849 at91sam9/at91cap: spi init add hardware chip select support
851 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
853 commit 66932ac3929c7a145a6ef6574a96fd7535154951
854 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
855 Date: Sat Apr 4 19:15:40 2009 +0200
857 netstar: fix crc32.c dependancy location
859 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
861 commit 42f9ebff2f758bef524780a00c712eb63a72d99b
862 Author: Scott Wood <scottwood@freescale.com>
863 Date: Fri Apr 3 15:24:40 2009 -0500
865 MPC8260ADS: Define CONFIG_HAS_ETH0.
867 This is required so that the MAC address will be updated in the device tree.
869 Signed-off-by: Scott Wood <scottwood@freescale.com>
871 commit 8701eceffdf77e2908d0b58add0dabc16edf6087
872 Author: Scott Wood <scottwood@freescale.com>
873 Date: Fri Apr 3 15:26:45 2009 -0500
877 PCI on PQ2FADS is very similar to PCI on MPC8272ADS.
879 Signed-off-by: Scott Wood <scottwood@freescale.com>
881 commit 83863df04bd30bfe2430b0c43ca9f78596d3f0bc
882 Author: Wolfgang Denk <wd@denx.de>
883 Date: Sat Apr 4 16:57:50 2009 +0200
885 Fix quoting bug introduced by commit 74de7aef
887 Signed-off-by: Wolfgang Denk <wd@denx.de>
889 commit ecf3fb223a56e3c6aa696d94d694eeaca0f44d33
890 Author: Wolfgang Denk <wd@denx.de>
891 Date: Sat Apr 4 16:14:51 2009 +0200
893 Fix implicit declaration of function 'htons'
895 Include <netinet/in.h> instead of <linux/in.h> to get htons()
898 Signed-off-by: Wolfgang Denk <wd@denx.de>
900 commit e6a6789f41f0560ce280089fbd3f1bd0f0f64306
901 Author: Kumar Gala <galak@kernel.crashing.org>
902 Date: Sat Apr 4 10:21:02 2009 -0500
904 fsl_law: Fix bug in calculation of LAW sizing
906 In set_ddr_laws() when we determined how much of the size requested
907 to be mapped was covered by the the first LAW we needed to recalculate
908 the size based on what was actually mapped.
910 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
912 commit 32049b4048ff8e59bd5ba6160d6d5206d283b2a2
913 Author: Kumar Gala <galak@kernel.crashing.org>
914 Date: Thu Apr 2 13:57:05 2009 -0500
916 fsl_pci: Move prototypes into fsl_pci.h and remove explicit externs
918 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
920 commit c8514622e2713d9c47919acfe23fce386782afe7
921 Author: Kumar Gala <galak@kernel.crashing.org>
922 Date: Thu Apr 2 13:22:48 2009 -0500
924 fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.h
926 Rename the pci header for FSL HW so we can move some prototypes
927 in there and stop doing explicit externs
929 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
931 commit afcbce07e9323c0e8aeb783ba7ce6104860fd7a7
932 Author: Wolfgang Denk <wd@denx.de>
933 Date: Sat Apr 4 16:10:40 2009 +0200
935 Fix building of env_embedded.o
937 Since commit a706bfc7 common/env_embedded.o and tools/envcrc were
938 only built when CONFIG_ENV_IS_EMBEDDED was set, but this breaks
939 building for many boards.
941 We always have to build these files when CONFIG_ENV_IS_IN_FLASH is
944 Signed-off-by: Wolfgang Denk <wd@denx.de>
946 commit a31e091ad70915278fb15b79d6ae53ea2d44b251
947 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
948 Date: Sat Apr 4 12:49:11 2009 +0200
950 rename include/zlib.h to include/u-boot/zlib.h
952 Some systems have zlib.h installed in /usr/include/. This isn't the
953 desired file for u-boot code - we want the one in include/zlib.h.
954 This rename will avoid the conflict.
956 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
957 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
959 commit ae644c178f097874a92a6d934f364985fc7e075a
960 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
961 Date: Sat Apr 4 12:46:31 2009 +0200
963 tools/Makefile: fix image.c dependancy location
965 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
966 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
968 commit b074a7081124d7f05fd1651a3bc0b5579fdfa473
969 Author: Mike Frysinger <vapier@gentoo.org>
970 Date: Sat Apr 4 07:42:25 2009 -0400
972 tools: add ncb to gitignore
974 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
976 commit 453c0d7558215cbc8636d94af172886d84e0dbba
977 Author: Detlev Zundel <dzu@denx.de>
978 Date: Fri Apr 3 16:45:46 2009 +0200
980 include/ns16550.h: Unify structure declaration for registers
982 Instead of special casing the different access patterns, use common
983 code with light macros sprinkled in to accomodate for the different
984 layouts of the register structure.
986 Note that this also changes the types of the registers for the
987 "positively packed (>1)" cases. As the registers truly are unsigned
988 chars, this is surely the Right Thing, but it is a semantic change.
989 Note that for this case depending on the endianness on the bus, we may
990 see a change of behaviour.
992 Signed-off-by: Detlev Zundel <dzu@denx.de>
994 commit 0a145ce6e7075aa0f4869d6f6149a5ff205d95df
995 Author: Peter Tyser <ptyser@xes-inc.com>
996 Date: Fri Mar 13 18:54:52 2009 -0500
998 Delete now unused tools/Makefile.win32
1000 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1002 commit 2f8d396b9302eddcd8d552648e101a46b7a80acd
1003 Author: Peter Tyser <ptyser@xes-inc.com>
1004 Date: Fri Mar 13 18:54:51 2009 -0500
1006 Add support for building native win32 tools
1008 Add support for compiling the host tools in the tools directory using
1009 the MinGW toolchain. This produces executables which can be used on
1010 standard Windows computers without requiring cygwin.
1012 One must specify the MinGW compiler and strip utilities as if they
1013 were the host toolchain in order to build win32 executables, eg:
1015 make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
1017 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1019 commit e50abf662efbf4ce0e731062c8d3c8ec54763ae2
1020 Author: Peter Tyser <ptyser@xes-inc.com>
1021 Date: Fri Mar 13 18:54:50 2009 -0500
1023 tools/Makefile: Simplify HOST_CFLAGS/HOST_LDFLAGS generation
1025 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1027 commit b0d4d7219a4806e46affc96bd1f65397194a6e72
1028 Author: Peter Tyser <ptyser@xes-inc.com>
1029 Date: Fri Mar 13 18:54:49 2009 -0500
1031 tools/Makefile: Create generic build rules
1033 Create a few generic build rules to replace the current method which has
1034 1 build target for each file
1036 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1038 commit 273174ddbcce215c42f6c307470cd5580a3f72bf
1039 Author: Peter Tyser <ptyser@xes-inc.com>
1040 Date: Fri Mar 13 18:54:48 2009 -0500
1042 tools/Makefile: Use auto-generated object file dependencies
1044 Files in the SRCS variable have their dependencies automatically
1045 generated so remove duplicate explicit dependencies
1047 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1049 commit fb8b33c1e6d621ea3347a75ad3a42a386b44e589
1050 Author: Peter Tyser <ptyser@xes-inc.com>
1051 Date: Fri Mar 13 18:54:47 2009 -0500
1053 tools/Makefile: Remove symlinks for remaining source files
1055 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1057 commit eed073315b6447eceadf7468a4c2b757442c7c6f
1058 Author: Peter Tyser <ptyser@xes-inc.com>
1059 Date: Fri Mar 13 18:54:46 2009 -0500
1061 tools/Makefile: Dynamically generate libfdt object dependencies
1063 Add the libfdt files to the SRCS variable so that they have their
1064 dependencies automatically generated
1066 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1068 commit c0170175393b94560fa7a5da6dd31377df5f4a72
1069 Author: Peter Tyser <ptyser@xes-inc.com>
1070 Date: Fri Mar 13 18:54:45 2009 -0500
1072 tools/Makefile: Remove symlinks for fdt targets
1074 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1076 commit 45d6bdff68877ea214ff33cc1c89a29c76e96f51
1077 Author: Peter Tyser <ptyser@xes-inc.com>
1078 Date: Fri Mar 13 18:54:44 2009 -0500
1080 tools/Makefile: Add libfdt/ to the include search path
1082 This change makes the process of symlinking libfdt_internal.h
1085 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1087 commit fba0e3a0814f9bf48c32a4c8a7987c36ae96651b
1088 Author: Peter Tyser <ptyser@xes-inc.com>
1089 Date: Fri Mar 13 18:54:43 2009 -0500
1091 tools: Remove unecessary symlinking of zlib.h
1093 crc32.c uses the zlib.h header in include/u-boot/zlib.h. The symlink
1094 was previously necessary to give U-Boot's version of zlib.h precedence
1095 over the host computer's version of zlib.h.
1097 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1099 commit 40b8d909ace06f6f494dee08ffa64a82493e72e9
1100 Author: Peter Tyser <ptyser@xes-inc.com>
1101 Date: Fri Mar 13 18:54:42 2009 -0500
1103 tools/Makefile: Add tools/ to the include search path
1105 This change makes the process of symlinking mkimage.h and fdt_host.h
1108 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1110 commit 1cd300de5e19c9e8383ee2eb2b6bd3b8b9378c78
1111 Author: Peter Tyser <ptyser@xes-inc.com>
1112 Date: Fri Mar 13 18:54:41 2009 -0500
1114 tools/Makefile: Compile ncb when CONFIG_NETCONSOLE
1116 Also conditionally add ncb.o to OBJ_FILES list
1118 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1120 commit 123c48a21ce08b4a33f36e96cc75f92324e761d7
1121 Author: Peter Tyser <ptyser@xes-inc.com>
1122 Date: Fri Mar 13 18:54:40 2009 -0500
1124 tools/Makefile: Make gen_eth_addr dependent upon CONFIG_CMD_NET
1126 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1128 commit 4d93a0a807b8ca0289ba5da00c646cd2d54af120
1129 Author: Peter Tyser <ptyser@xes-inc.com>
1130 Date: Fri Mar 13 18:54:39 2009 -0500
1132 tools/Makefile: Make envcrc dependent upon CONFIG_ENV_IS_EMBEDDED
1134 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1136 commit cd26a31a23f9a58ba52870f8ffb57d77d1baee20
1137 Author: Peter Tyser <ptyser@xes-inc.com>
1138 Date: Fri Mar 13 18:54:38 2009 -0500
1140 tools/Makefile: Make inca-swap-bytes dependent on CONFIG_INCA_IP
1142 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1144 commit 7cd5cbc34699ccc15d0277f48375cad928d04faf
1145 Author: Peter Tyser <ptyser@xes-inc.com>
1146 Date: Fri Mar 13 18:54:37 2009 -0500
1148 tools/Makefile: Make ubsha1 dependent upon CONFIG_SHA1_CHECK_UB_IMG
1150 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1152 commit eeba8617908e33f7e7db3b1588c04ca65b856793
1153 Author: Peter Tyser <ptyser@xes-inc.com>
1154 Date: Fri Mar 13 18:54:36 2009 -0500
1156 tools/Makefile: Make img2srec dependent upon CONFIG_CMD_LOADS
1158 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1160 commit 335ffe7e0e0a30e90ce409c3279016a582157d8e
1161 Author: Peter Tyser <ptyser@xes-inc.com>
1162 Date: Fri Mar 13 18:54:35 2009 -0500
1164 tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled
1166 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1168 commit ee3584a5970230ee96aae19505ad3226734ee4ff
1169 Author: Peter Tyser <ptyser@xes-inc.com>
1170 Date: Fri Mar 13 18:54:34 2009 -0500
1172 tools/Makefile: Split variable declarations into multiple lines
1174 Split variable declarations into multiple lines and use the standard
1175 VAR-y convention. Also move object and binary variable declarations to
1176 after config.mk has been included to allow for these lists to utilize
1177 the CONFIG_XXX variables.
1179 These changes lay the groundwork for conditional compilation of files
1180 in the tools directory.
1182 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1184 commit 21d28e95ed874ab1ed9787f939d8a53e99d30ddb
1185 Author: Peter Tyser <ptyser@xes-inc.com>
1186 Date: Fri Mar 13 18:54:33 2009 -0500
1188 tools/Makefile: Remove inappropriate double-tabs
1190 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1192 commit 652f4ba076689fd0acd447561a777b1c440a4b57
1193 Author: Peter Tyser <ptyser@xes-inc.com>
1194 Date: Fri Mar 13 18:54:32 2009 -0500
1196 tools/Makefile: Remove HOSTARCH HOSTOS defines
1198 The values of HOSTARCH and HOSTOS which are exported from the top-level
1199 Makefile should be used
1201 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1203 commit 2eeb4e95fbfafe54645fae7ec0b2594101f0573b
1204 Author: Peter Tyser <ptyser@xes-inc.com>
1205 Date: Fri Mar 13 18:54:31 2009 -0500
1207 gen_eth_addr: Use POSIX rand() and srand()
1209 Replace random()/srandom() use with rand()/srand() to support
1210 compilation with the mingw toolchain. The rand()/srand() functions are
1211 generally more common and are functionally equivalent to the original
1212 random()/srandom() calls.
1214 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1216 commit 24d2ae5e9debe4b75151a55251031a14477fa875
1217 Author: Peter Tyser <ptyser@xes-inc.com>
1218 Date: Fri Mar 13 18:54:28 2009 -0500
1220 elf.h: Use stdint.h to provide standard typedefs for WIN32
1222 The original code provided an incomplete set of typedefs for WIN32
1223 compiles and replicated the standard typedefs that are already
1224 provided by stdint.h
1226 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1228 commit a706bfc7d0e2d1935c5670045288e6cd1ffdfabc
1229 Author: Peter Tyser <ptyser@xes-inc.com>
1230 Date: Fri Mar 13 18:54:27 2009 -0500
1232 common/Makefile: Conditionally compile env_embedded.o
1234 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1236 commit 2b48f7d5f62835f87278efb498397b6ae9e2d117
1237 Author: Peter Tyser <ptyser@xes-inc.com>
1238 Date: Fri Mar 13 18:54:26 2009 -0500
1240 Makefile: Add removal of *.exe files to clean target
1242 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1244 commit d0d6144e0e4a03a68311b781f3dde38dc9316b82
1245 Author: Peter Tyser <ptyser@xes-inc.com>
1246 Date: Fri Mar 13 18:54:25 2009 -0500
1248 Makefile: Make autoconf.mk a dependency of the depend target
1250 The original code did not generate autoconf.mk until after some targets
1251 dependencies had already been calculated, for example the directories in
1252 the SUBDIRS variable
1254 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1256 commit 75eb82ec7cacb18d059d701b35677b93d2bb7596
1257 Author: unsik Kim <donari75@gmail.com>
1258 Date: Wed Feb 25 11:31:24 2009 +0900
1260 mflash: Initial mflash support
1262 Mflash is fusion memory device mainly targeted consumer eletronic and
1264 Internally, it have nand flash and other hardware logics and supports
1265 some different operation (ATA, IO, XIP) modes.
1267 IO mode is custom mode for the host that doesn't have IDE interface.
1268 (Many mobile targeted SoC doesn't have IDE bus)
1270 This driver support mflash IO mode.
1272 Followings are brief descriptions about IO mode.
1274 1. IO mode based on ATA protocol and uses some custom command. (read
1275 confirm, write confirm)
1276 2. IO mode uses SRAM bus interface.
1278 Signed-off-by: unsik Kim <donari75@gmail.com>
1280 commit 200779e3e2a9aeda7030b171a8c39d7797019917
1281 Author: Detlev Zundel <dzu@denx.de>
1282 Date: Fri Apr 3 11:53:01 2009 +0200
1284 Rename common ns16550 constants with UART_ prefix to prevent conflicts
1286 Fix problems introduced in commit
1287 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware
1288 diagnosis functions for inka4x0] which redefined MSR_RI which is
1289 already used on PowerPC systems.
1291 Also eliminate redundant definitions in ps2mult.h. More cleanup will
1292 be needed for other redundant occurrences though.
1294 Signed-off-by: Detlev Zundel <dzu@denx.de>
1296 commit 99067b08f4a0ce20ff337a35211239f334d8f451
1297 Author: Scott Wood <scottwood@freescale.com>
1298 Date: Wed Apr 1 15:33:24 2009 -0500
1300 Noisily disable the legacy NAND subsystem.
1302 Legacy NAND is marked for feature removal after April 2009 (i.e. this
1303 upcoming release). There are still several boards that reference it
1304 (though many do so only for disk-on-chip support which has been silently
1305 disabled for a while now). These boards will now fail to build
1306 with #error, though the code is still there if the user removes #error.
1308 The plan is to remove the code outright in the next release, along with
1309 any board code that refers to it (such as board/esd/common/auto_update.c).
1311 Also, remove the legacy NAND API description from README.nand.
1313 Signed-off-by: Scott Wood <scottwood@freescale.com>
1315 commit 69bcabb51686fdd133cb1848c0d3b0a4fc6ca5cf
1316 Author: apgmoorthy <moorthy.apg@samsung.com>
1317 Date: Fri Mar 27 14:45:23 2009 +0530
1319 Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
1321 Currently OneNAND initial program loader (ipl) reads only block 0 ie 128KB.
1322 However, u-boot image for apollon board is 195KB making the board
1323 unbootable with OneNAND.
1325 Fix ipl to read CONFIG_SYS_MONITOR_LEN.
1326 CONFIG_SYS_MONITOR_LEN macro holds the U-Boot image size.
1328 Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com>
1329 Signed-off-by: Gangheyamoorthy <moorthy.apg@samsung.com>
1330 Signed-off-by: Scott Wood <scottwood@freescale.com>
1332 commit 74de7aefd79690bae8cf5a5120f5962d444be089
1333 Author: Wolfgang Denk <wd@denx.de>
1334 Date: Wed Apr 1 23:34:12 2009 +0200
1336 Add "source" command; prepare removal of "autoscr" command
1338 According to the doc/feature-removal-schedule.txt, the "autoscr"
1339 command will be replaced by the "source" command in approximately 6
1342 This patch prepares this change and starts a 6 month transition
1345 - The new "source" command has been added, which implements exactly
1346 the same functionlaity as the old "autoscr" command before
1347 - The old "autoscr" command name is kept as an alias for compatibility
1348 - Command sequences, script files atc. have been adapted to use the
1349 new "source" command
1350 - Related environment variables ("autoscript", "autoscript_uname")
1351 have *not* been adapted yet; these will be renamed resp. removed in
1352 a separate patch when the support for the "autoscr" command get's
1355 Signed-off-by: Wolfgang Denk <wd@denx.de>
1357 commit 78237df55248034a2d7c2daea992b9dbe7ca8e96
1358 Author: Wolfgang Denk <wd@denx.de>
1359 Date: Thu Apr 2 17:31:09 2009 +0200
1361 Add "GPL cleanup" task to feature-removal-schedule.txt
1363 Announce removal of all non-GPL or GPL-incompatible files
1366 Signed-off-by: Wolfgang Denk <wd@denx.de>
1368 commit d9596ffbdc79cea285010b67dd20a4618303f624
1369 Author: Mike Frysinger <vapier@gentoo.org>
1370 Date: Thu Apr 2 12:51:28 2009 -0400
1372 sf: stmicro: dont send 4 bytes when reading status register
1374 I can't find anywhere in the datasheet that says the status register needs
1375 3 dummy bytes sent to it before being able to read back the first real
1376 result. Tests on a Blackfin board show that after writing the opcode, the
1377 status register starts coming back immediately. So only write out the
1378 read status register opcode before polling the result.
1380 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1381 CC: Jason McMullan <mcmullan@netapp.com>
1382 CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1384 commit 1abe365ffcfc29c061e8fd8b45551be5ad1428dd
1385 Author: Mike Frysinger <vapier@gentoo.org>
1386 Date: Thu Apr 2 08:11:31 2009 -0400
1388 sf: set common timeouts in seconds, not milliseconds
1390 Since timeouts are only hit when there is a problem in the system, we
1391 don't want to prematurely timeout on a functioning setup. Thus having
1392 low timeouts (in milliseconds) doesn't gain us anything in the production
1393 case, but rather increases likely hood of causing problems where none
1396 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1397 CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1399 commit 2a6ce1115b3cbe746965cfa0058ce645b6c1ada1
1400 Author: Mike Frysinger <vapier@gentoo.org>
1401 Date: Thu Apr 2 06:51:49 2009 -0400
1403 sf: stmicro: use common page timeout define
1405 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1406 CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1408 commit 0dcdbb172c2fdf60c5c578980308b312fd56496f
1409 Author: Mike Frysinger <vapier@gentoo.org>
1410 Date: Sat Mar 28 06:41:09 2009 -0400
1412 sf: always read 5 bytes for the idcode
1414 Some SPI flash drivers like to have extended id information available
1415 (like the spansion flash), so rather than making it re-issue the ID cmd
1416 to get at the last 2 bytes, have the common code read 5 bytes rather than
1417 just 3. This also matches the Linux behavior where it always reads 5 id
1418 bytes from all flashes.
1420 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1421 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1422 CC: Mingkai Hu <Mingkai.hu@freescale.com>
1424 commit 9726ba4abaa16cd6c385ad350d403f98a8eacf52
1425 Author: Mike Frysinger <vapier@gentoo.org>
1426 Date: Fri Mar 27 16:34:21 2009 -0400
1428 sf: stmicro: drop redundant id read
1430 The common SPI flash code reads the idcode and passes it down to the SPI
1431 flash driver, so there is no need to read it again ourselves.
1433 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1434 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1435 CC: Jason McMullan <mcmullan@netapp.com>
1436 CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1438 commit 1c5874374e091b4bb62917c519861f7682fe066e
1439 Author: Mike Frysinger <vapier@gentoo.org>
1440 Date: Fri Mar 27 19:27:58 2009 -0400
1442 sf: add driver for SST flashes
1444 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1445 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1447 commit f773a1bbdb8f3bf1ddab2874f36f043c4f8f044d
1448 Author: Mike Frysinger <vapier@gentoo.org>
1449 Date: Mon Mar 23 23:03:58 2009 -0400
1451 sf: drop DEBUG defines
1453 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1454 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1456 commit 6b850a9fa8a216f3692da2511cb1a6c16409b1af
1457 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1458 Date: Sun Jan 4 07:44:07 2009 +0100
1460 mtd: add some at45 spi flash support
1469 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1470 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1472 commit 6805e4bf83e6f444f7411101228766c8a7aec5f7
1473 Author: Mingkai Hu <Mingkai.hu@freescale.com>
1474 Date: Tue Mar 31 14:09:41 2009 +0800
1476 mtd: SPI Flash: Support the Spansion Flash
1478 Add MTD SPI Flash support for S25FL008A, S25FL016A,
1479 S25FL032A, S25FL064A, S25FL128P.
1481 Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
1482 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1484 commit 40587701924aa0afc86b3840421b4cc6de42c748
1485 Author: Mike Frysinger <vapier@gentoo.org>
1486 Date: Mon Mar 30 20:56:45 2009 -0400
1488 Blackfin: force all boards to HZ of 1000
1490 Since the Blackfin timer code requires HZ to be 1000, barf on any board
1491 that tries to use a different value.
1493 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1495 commit f4032d2eec9d71a59c6c724671e577f67a76839b
1496 Author: Mike Frysinger <vapier@gentoo.org>
1497 Date: Fri Mar 27 21:07:45 2009 -0400
1499 Blackfin: bf533-stamp: drop old spi flash driver
1501 Now that the common SPI flash code supports all the flashes, we can stop
1502 using the old driver.
1504 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1506 commit bc72f50a659d0d1b551817e1910b9b2be1c7e496
1507 Author: Mike Frysinger <vapier@gentoo.org>
1508 Date: Thu Mar 26 15:42:12 2009 -0400
1510 Blackfin: add BF538/BF539 SPI portmux handling
1512 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1514 commit 46ac352f0f9406a5f9aa157ac62867fb4650dfd3
1515 Author: Mike Frysinger <vapier@gentoo.org>
1516 Date: Mon Mar 23 22:36:10 2009 -0400
1518 Blackfin: do not delay on output bytes
1520 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1522 commit dbc6ab9f75bd0c13d3f42692e9463f8ab65fc382
1523 Author: Mike Frysinger <vapier@gentoo.org>
1524 Date: Mon Mar 23 22:17:27 2009 -0400
1526 Blackfin: drop newline from OTP help
1528 Looks like I accidentally added a newline to the OTP help when merging and
1531 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1533 commit d3c38d96b991d641a33f7748130dae008563cdc9
1534 Author: Mike Frysinger <vapier@gentoo.org>
1535 Date: Sun Mar 22 23:43:31 2009 -0400
1537 Blackfin: convert bfin_sdh to legacy mmc
1539 The Blackfin SDH controller is still using the legacy framework, so update
1540 the driver to use the renamed functions.
1542 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1544 commit d248cfb2d940b742f6bfdba9b832a3df96da3101
1545 Author: Mike Frysinger <vapier@gentoo.org>
1546 Date: Sun Feb 22 16:30:38 2009 -0500
1548 Blackfin: bf537-stamp: split CF/IDE code out into dedicated cf-ide.c
1550 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1552 commit ad9073211ca9e62162a39851e082b8d07a662fb6
1553 Author: Mike Frysinger <vapier@gentoo.org>
1554 Date: Fri Feb 13 17:10:58 2009 -0500
1556 Blackfin: fix crash when booting from external memory
1558 When testing a u-boot binary that hasn't been booted from the bootrom, we
1559 have to make sure the bootstruct structure has sane storage space. If we
1560 don't, the initcode will crash when it tries to dereference an invalid
1563 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1565 commit 84a9dda324c3faa56be14449d7519b993d9397a9
1566 Author: Mike Frysinger <vapier@gentoo.org>
1567 Date: Sun Oct 12 21:32:52 2008 -0400
1569 Blackfin: bf518f-ezbrd: new board port
1571 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1573 commit 0c31ddf7b70f77dede42dc82ecab7753a819acaa
1574 Author: Mike Frysinger <vapier@gentoo.org>
1575 Date: Sun Oct 12 21:30:48 2008 -0400
1577 Blackfin: bf526-ezbrd: new board port
1579 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1581 commit 5c45f7cac2f74e2c14aa6b028cd969651cc9ac8e
1582 Author: Mike Frysinger <vapier@gentoo.org>
1583 Date: Sun Oct 12 21:25:33 2008 -0400
1585 Blackfin: bf538f-ezkit: new board port
1587 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1589 commit d9a5d113b93583c984711127ab8503e136ed1e4a
1590 Author: Mike Frysinger <vapier@gentoo.org>
1591 Date: Sun Oct 12 20:59:12 2008 -0400
1593 Blackfin: bf527-ezkit: new board port
1595 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1597 commit 76d21803ddd7dc4bcb81739ea2d3cd679e052f46
1598 Author: Mike Frysinger <vapier@gentoo.org>
1599 Date: Sun Oct 12 05:05:42 2008 -0400
1601 Blackfin: bf548-ezkit: new board port
1603 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1605 commit 67b89c79e72fe86b0ea0199425d880630beb95d8
1606 Author: Laurent Gregoire <laurent.gregoire@tomtom.com>
1607 Date: Tue Mar 3 14:23:59 2009 +0100
1609 libfdt: Fix C++ compile-time cast error on gnu 4.2.1
1611 Allow the inclusion of libfdt.h in C++ source.
1613 Signed-off-by: Laurent Gregoire <laurent.gregoire@tomtom.com>
1614 Acked-by: David Gibson <david@gibson.dropbear.id.au>
1616 commit 13d93f38e86818739317b0206d597265cf9e675e
1617 Author: Emil Medve <Emilian.Medve@Freescale.com>
1618 Date: Mon Feb 23 10:43:36 2009 -0600
1620 Fix a possible overflow case detected by gcc 4.3.2
1622 .../dtc/libfdt/fdt_sw.c: In function 'fdt_end_node':
1623 .../dtc/libfdt/fdt_sw.c:81: error: assuming signed overflow does not occur when assuming that (X + c) < X is always false
1625 Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
1627 commit a22d9cfbb5bcfb3dc6ffd64d391b568e8a0ce383
1628 Author: David Gibson <david@gibson.dropbear.id.au>
1629 Date: Fri Feb 6 14:03:24 2009 +1100
1631 libfdt: Rework/cleanup fdt_next_tag()
1633 Currently, callers of fdt_next_tag() must usually follow the call with
1634 some sort of call to fdt_offset_ptr() to verify that the blob isn't
1635 truncated in the middle of the tag data they're going to process.
1636 This is a bit silly, since fdt_next_tag() generally has to call
1637 fdt_offset_ptr() on at least some of the data following the tag for
1640 This patch alters fdt_next_tag() to always use fdt_offset_ptr() to
1641 verify the data between its starting offset and the offset it returns
1642 in nextoffset. This simplifies fdt_get_property() which no longer has
1643 to verify itself that the property data is all present.
1645 At the same time, I neaten and clarify the error handling for
1646 fdt_next_tag(). Previously, fdt_next_tag() could return -1 instead of
1647 a tag value in some circumstances - which almost none of the callers
1648 checked for. Also, fdt_next_tag() could return FDT_END either because
1649 it encountered an FDT_END tag, or because it reached the end of the
1650 structure block - no way was provided to tell between these cases.
1652 With this patch, fdt_next_tag() always returns FDT_END with a negative
1653 value in nextoffset for an error. This means the several places which
1654 loop looking for FDT_END will still work correctly - they only need to
1655 check for errors at the end. The errors which fdt_next_tag() can
1657 - -FDT_ERR_TRUNCATED if it reached the end of the structure
1658 block instead of finding a tag.
1660 - -FDT_BADSTRUCTURE if a bad tag was encountered, or if the
1661 tag data couldn't be verified with fdt_offset_ptr().
1663 This patch also updates the callers of fdt_next_tag(), where
1664 appropriate, to make use of the new error reporting.
1666 Finally, the prototype for the long gone _fdt_next_tag() is removed
1667 from libfdt_internal.h.
1669 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
1671 commit 2c0b843e710aa1e2da25c2592e6dbe5d0b0ab7da
1672 Author: David Gibson <david@gibson.dropbear.id.au>
1673 Date: Fri Feb 6 14:01:56 2009 +1100
1675 libfdt: Rework fdt_next_node()
1677 Currently fdt_next_node() will find the next node in the blob
1678 regardless of whether it is above, below or at the same level in the
1679 tree as the starting node - the depth parameter is updated to indicate
1680 which is the case. When a depth parameter is supplied, this patch
1681 makes it instead terminate immediately when it finds the END_NODE tag
1682 for a node at depth 0. In this case it returns the offset immediately
1683 past the END_NODE tag.
1685 This has a couple of advantages. First, this slightly simplifies
1686 fdt_subnode_offset(), which no longer needs to explicitly check that
1687 fdt_next_node()'s iteration hasn't left the starting node. Second,
1688 this allows fdt_next_node() to be used to implement
1689 _fdt_node_end_offset() considerably simplifying the latter function.
1691 The other users of fdt_next_node() either don't need to iterate out of
1692 the starting node, or don't pass a depth parameter at all. Any
1693 callers that really need to iterate out of the starting node, but keep
1694 tracking depth can do so by biasing the initial depth value.
1696 This is a semantic change, but I think it's very unlikely to break any
1697 existing library users.
1699 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
1701 commit c123098035be8bae3859bbfbd06861f197c07631
1702 Author: Scott Wood <scottwood@freescale.com>
1703 Date: Tue Mar 31 17:49:36 2009 -0500
1705 mpc83xx: Set guarded bit on BAT that covers the end of the address space
1707 The mpc8313erdb board currently sets DBAT6 to cover all of the final 256MiB of
1708 address space; however, not all of this space is covered by a device. In
1709 particular, flash sits at 0xfe000000-0xfe7fffff, and nothing is mapped
1710 at the far end of the address space.
1712 In zlib, there is a loop that references p[-1] if p is non-NULL. Under
1713 some circumstances, this leads to the CPU speculatively loading from
1714 0xfffffff8 if p is NULL. This leads to a machine check.
1716 Signed-off-by: Scott Wood <scottwood@freescale.com>
1718 continuation to the remaining mpc83xx boards that suffer from the same problem.
1720 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1722 commit c2eb8be7f760a2efe30a495bfb10857838dcf3fa
1723 Author: Kim Phillips <kim.phillips@freescale.com>
1724 Date: Mon Mar 30 14:28:05 2009 -0500
1726 rtc: remove broken rtc_read and rtc_write declarations
1728 commit 04e11cf3 "rtc: add support for 4543 RTC (manufactured by e.g.
1729 EPSON)" introduces the following build error on boards configuring e.g,
1732 Configuring for MPC837XEMDS board...
1733 ds1374.c:103: error: static declaration of 'rtc_read' follows non-static declaration
1734 /home/r1aaha/git/u-boot/include/rtc.h:64: error: previous declaration of 'rtc_read' was here
1735 ds1374.c:104: error: conflicting types for 'rtc_write'
1736 /home/r1aaha/git/u-boot/include/rtc.h:65: error: previous declaration of 'rtc_write' was here
1738 this reverts the erroneous chunk.
1740 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1741 Acked-by: Detlev Zundel <dzu@denx.de>
1742 CC: Detlev Zundel <dzu@denx.de>
1743 CC: Andreas Pfefferle <ap@denx.de>
1745 commit fc39c2fd51e64707de4d61ed49479ebea2847e1b
1746 Author: Kumar Gala <galak@kernel.crashing.org>
1747 Date: Tue Mar 31 17:58:13 2009 -0500
1749 85xx/86xx: Ensure MP boot page is not used
1751 We had a bug on 86xx in which the boot page used to bring up secondary
1752 cores was being overwritten and used for the malloc region in u-boot.
1754 We need to reserve the region of memory that the boot page is going to
1755 be put at so nothing uses it.
1757 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1758 Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
1760 commit c840d26c752141b94bbc24ac748ddd45752a955a
1761 Author: Kumar Gala <galak@kernel.crashing.org>
1762 Date: Tue Mar 31 23:11:05 2009 -0500
1764 85xx: Introduce determine_mp_bootpg() helper.
1766 Match determine_mp_bootpg() that was added for 86xx. We need this to
1767 address a bug introduced in v2009.03 with 86xx MP booting. We have to
1768 make sure to reserve the region of memory used for the MP bootpg() so
1769 other u-boot code doesn't use it.
1771 Also added a comment about how cpu_reset() is dealing w/an errata on
1774 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1776 commit 7649a590b53ee548f41428bf20780f74ce9fc099
1777 Author: Kumar Gala <galak@kernel.crashing.org>
1778 Date: Tue Mar 31 23:02:38 2009 -0500
1780 86xx: Cleanup MP support
1782 * Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx
1783 * Introduce determine_mp_bootpg() helper. We'll need this to address a
1784 bug introduced in v2009.03 with 86xx MP booting. We have to make sure
1785 to reserve the region of memory used for the MP bootpg() so other
1786 u-boot code doesn't use it.
1787 * Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to
1788 allow cmd_mp.c to build and work. In the future we should look at
1789 implementing all these functions. This could be common w/85xx if we
1790 use spin tables on 86xx.
1792 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1794 commit f6ef8b7a43ed7f68a4bb524faad5e4f75ea3e3e2
1795 Author: Becky Bruce <beckyb@kernel.crashing.org>
1796 Date: Tue Mar 31 18:38:37 2009 -0500
1798 mpc8641hpcn/sbc8641d: Add missing board_lmb_reserves
1800 We're missing the board_lmb_reserve definitions that allow
1801 cpu_mp_lmb_reserve to be called; this means that Linux
1802 is free to reallocate reserved pages. Linux currently boots
1803 because we're getting lucky - the page we've reserved is
1804 high enough in memory that it isn't allocated by Linux
1805 while we still need it to be in existence.
1807 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
1808 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1810 commit 0fc4f64c59873a47d555dd66bad25797d4ecb0ed
1811 Author: Ladislav Michl <ladis@linux-mips.org>
1812 Date: Tue Mar 31 13:43:10 2009 +0200
1816 Fix NAND support broken during new NAND code merge. Move those few lines of
1817 code to board/netstar/netstar.c
1819 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1821 commit d144f94d590b5190a9963bd0f2026b2a7ce67eda
1822 Author: Jens Scharsig <esw@bus-elektronik.de>
1823 Date: Tue Mar 31 08:18:29 2009 +0200
1825 soft_i2c.c compiler/linker error
1827 This patch fix the compiler/linker errors
1829 common/cmd_i2c.c:1252: undefined reference to `i2c_get_bus_speed'
1830 common/cmd_i2c.c:1256: undefined reference to `i2c_set_bus_speed'
1832 if board use CONFIG_I2C_CMD_TREE and CONFIG_I2C_MULTI_BUS is not
1833 uesd/undef (wrong define order)
1837 removes additional empty lines
1839 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
1841 commit 765547dc5e0e8cbe6b8f4ea8a5d6ff237935c352
1842 Author: Haiying Wang <Haiying.Wang@freescale.com>
1843 Date: Fri Mar 27 17:02:45 2009 -0400
1845 MPC85xx: Add MPC8569MDS board support
1847 This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD
1848 EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch.
1850 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1851 Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
1852 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1854 commit 22b6dbc1696d927d938dd4e16f65d83c0d4fb3f4
1855 Author: Haiying Wang <Haiying.Wang@freescale.com>
1856 Date: Fri Mar 27 17:02:44 2009 -0400
1858 MPC85xx: Add MPC8569 CPU support
1860 There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of
1861 LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage,
1862 then invalidate it after LBCR bit 13 is set.
1864 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1865 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1867 commit 2d4de6ae5be54b367a72a7ef4e0cf36a9cd4881f
1868 Author: Haiying Wang <Haiying.Wang@freescale.com>
1869 Date: Thu Mar 26 17:01:49 2009 -0400
1871 MPC85xx: Load and enable QE microcode patch in IRAM
1873 For the silicon which doesn't have ROM support in QE, it always needs to load
1874 a pre-built ucode binary to IRAM so that QE can work.
1876 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1877 Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
1879 commit 1b3e4044a28a3d95b0aad41bdc52482bb2cc9b2b
1880 Author: Kumar Gala <galak@kernel.crashing.org>
1881 Date: Thu Mar 19 09:16:10 2009 -0500
1883 85xx: Add support for additional e500mc features
1885 * Enable backside L2
1886 * e500mc no longer has timebase enable in HID (moved to CCSR register)
1888 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1890 commit c360ceac0286159f94d9d1a9496fc9858c8d9bec
1891 Author: Dave Liu <daveliu@freescale.com>
1892 Date: Sat Mar 14 12:48:30 2009 +0800
1894 fsl-ddr: add the DDR3 SPD infrastructure
1896 - support mirrored DIMMs, not support register DIMMs
1897 - test passed on P2020DS board with MT9JSF12872AY-1G1D1
1898 - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1
1900 Signed-off-by: Dave Liu <daveliu@freescale.com>
1901 Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
1903 commit 6a8197836702991468cead5ead073f589e2623ad
1904 Author: Dave Liu <daveliu@freescale.com>
1905 Date: Sat Mar 14 12:48:19 2009 +0800
1907 fsl-ddr: Fix two bugs in the ddr infrastructure
1910 UM said the total write latency for DDR2 is equal to
1911 WR_LAT + ADD_LAT, the write latency is CL + ADD_LAT - 1.
1912 so, the WR_LAT = CL - 1;
1914 we missed to add the ADD_LAT for DDR2 case.
1916 Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
1917 Signed-off-by: Dave Liu <daveliu@freescale.com>
1919 commit 540dcf1cb86961e11aa92c47671f27762c581d8c
1920 Author: Kumar Gala <galak@kernel.crashing.org>
1921 Date: Thu Mar 26 01:34:39 2009 -0500
1923 83xx: Use common LSDMR defines from asm/fsl_lbc.h
1925 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1926 Acked-by: Kim Phillips <kim.phillips@freescale.com>
1928 commit b0fe93eda69721aef1fdef576164b668fad83bbd
1929 Author: Kumar Gala <galak@kernel.crashing.org>
1930 Date: Thu Mar 26 01:34:38 2009 -0500
1932 85xx: Use common LSDMR defines from asm/fsl_lbc.h
1934 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1936 commit 0088c298f0eeb90ec001f744e9959dea83dd563a
1937 Author: Kumar Gala <galak@kernel.crashing.org>
1938 Date: Thu Mar 26 01:34:37 2009 -0500
1940 Add LSDMR (SDRAM Mode Register) definition on localbus
1942 The masks for various bit defines of LSDMR are common and thus we can
1943 define them in one place rather than replicating them in each config.h
1945 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1947 commit 89c00fb15859213788f0ad089934c376fb356099
1948 Author: Ladislav Michl <ladis@linux-mips.org>
1949 Date: Mon Mar 30 18:58:41 2009 +0200
1951 OMAP: use {read,write}l to access timer registers
1953 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1955 commit 81472d893fa565c9d300928a40e504a689bde131
1956 Author: Ladislav Michl <ladis@linux-mips.org>
1957 Date: Mon Mar 30 18:58:41 2009 +0200
1959 OMAP: rename timer divisor
1961 Divisor field is called PTV not PVT.
1963 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1964 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1966 commit fe672d60b2a8c9e803596ba4533fa1776015551d
1967 Author: Ladislav Michl <ladis@linux-mips.org>
1968 Date: Mon Mar 30 18:58:40 2009 +0200
1970 OMAP: reindent timer code
1972 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1974 commit b3f66b0ba09949e0796ce7fad6367f75f15ed890
1975 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1976 Date: Mon Mar 30 18:58:40 2009 +0200
1978 s3c2410: move nand driver to drivers/mtd/nand
1980 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1982 commit d3b635774194404bcd424f6b376419bce22076ad
1983 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1984 Date: Mon Mar 30 18:58:40 2009 +0200
1986 s3c24x0: move i2c driver to drivers/i2c
1988 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1990 commit 300f99f4539dd5caf7e19af5e4ea5eb259445913
1991 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1992 Date: Mon Mar 30 18:58:39 2009 +0200
1994 s3c24x0: move serial driver to drivers/serial
1996 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1998 commit 942ba9969b9efa25f816c238861ecb339c54ed73
1999 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2000 Date: Mon Mar 30 18:58:39 2009 +0200
2002 davinci: move i2c driver to drivers/i2c
2004 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2006 commit ee4f3e2765a1c65c9861c5d2cf2e6feb84b90bd8
2007 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008 Date: Mon Mar 30 18:58:39 2009 +0200
2010 davinci: move nand driver to drivers/mtd/nand
2012 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2014 commit d3e55d0774a180c1837bd7ddec464015e883bd86
2015 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2016 Date: Mon Mar 30 18:58:38 2009 +0200
2018 imx: move serial driver to drivers/serial
2020 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2022 commit 2344bb8de2354101a8264c2123303c9d8d2aed3c
2023 Author: Detlev Zundel <dzu@denx.de>
2024 Date: Mon Mar 30 00:31:36 2009 +0200
2026 inka4x0: Use proper accessor macros for memory mapped registers.
2028 Signed-off-by: Detlev Zundel <dzu@denx.de>
2030 commit e979e85fd39b06436922bb4d6bb5fafcbc775182
2031 Author: Detlev Zundel <dzu@denx.de>
2032 Date: Mon Mar 30 00:31:35 2009 +0200
2034 inka4x0: Add hardware diagnosis and RTC in configuration.
2036 This patch adds the board specific communication routines needed by
2037 the external 4543 RTC.
2039 Signed-off-by: Detlev Zundel <dzu@denx.de>
2040 Signed-off-by: Andreas Pfefferle <ap@denx.de>
2042 commit 7b5611cdd12ca0cc33f994f0d4a4454788fc3124
2043 Author: Detlev Zundel <dzu@denx.de>
2044 Date: Mon Mar 30 00:31:34 2009 +0200
2046 inka4x0: Add hardware diagnosis functions for inka4x0
2048 This patch adds advanced diagnosis functions for the inka4x0 board.
2050 Signed-off-by: Andreas Pfefferle <ap@denx.de>
2051 Signed-off-by: Detlev Zundel <dzu@denx.de>
2053 commit 04e11cf383ff6231535fd981023bb1306b2133d4
2054 Author: Detlev Zundel <dzu@denx.de>
2055 Date: Mon Mar 30 00:31:33 2009 +0200
2057 rtc: add support for 4543 RTC (manufactured by e.g. EPSON)
2059 Signed-off-by: Detlev Zundel <dzu@denx.de>
2060 Signed-off-by: Andreas Pfefferle <ap@denx.de>
2062 commit 572e6179adb5447ff42ec2aa5cf3a26decf97583
2063 Author: Detlev Zundel <dzu@denx.de>
2064 Date: Mon Mar 30 00:31:32 2009 +0200
2066 drivers/twserial: Add protocol driver for "three wire serial" interface.
2068 This pretty unintelligent interface is used on some RTC chips.
2070 Signed-off-by: Detlev Zundel <dzu@denx.de>
2072 commit a6ef3ddeafbe8007af3662cc4509b897c53ab395
2073 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2074 Date: Sun Mar 29 23:01:42 2009 +0200
2076 arm720t/clps7111: move serial driver to drivers/serial
2078 add CONFIG_CLPS7111_SERIAL to activate the driver
2080 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2082 commit 6790c55704531eb98f76b51d50e0f73d19fa2988
2083 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2084 Date: Sun Mar 29 23:01:42 2009 +0200
2086 lpc2292: move serial driver to drivers/serial
2088 add CONFIG_LPC2292_SERIAL to activate the driver
2090 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2092 commit 176a600d0ecdaccbac483d2ba992d0119f853119
2093 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2094 Date: Sun Mar 29 23:01:42 2009 +0200
2096 ks8695: move serial driver to drivers/serial
2098 add CONFIG_KS8695_SERIAL to activate the driver
2100 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2102 commit 6d27bca15d445fcf07d6e7e30ced95c945c875ea
2103 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2104 Date: Sun Mar 29 23:01:42 2009 +0200
2106 s3c64xx: move usb driver to drivers/usb
2108 add CONFIG_USB_S3C64XX to activate the driver
2110 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2112 commit ecfa8dda2f55e1fbe12dee0b5cc16e7d484674c9
2113 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2114 Date: Sun Mar 29 23:01:41 2009 +0200
2116 imx31: move serial driver to drivers/serial
2118 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2120 commit 9ea91c9fefb3920d735533a7798c1a44a3ed3ffc
2121 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2122 Date: Sun Mar 29 23:01:41 2009 +0200
2124 netarm: move serial driver to drivers/serial
2126 add CONFIG_NETARM_SERIAL to activate the driver
2128 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2130 commit 412ab705888742add435dd6ffc2e8bda14962235
2131 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2132 Date: Sun Mar 29 23:01:41 2009 +0200
2134 sa1100: move serial driver to drivers/serial
2136 add CONFIG_SA1100_SERIAL to activate the driver
2138 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2140 commit b2368754a9202225fd072e159fb78da7d2cdb623
2141 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2142 Date: Sun Mar 29 23:01:41 2009 +0200
2144 s3c44b0: extract cache from cpu.c
2146 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2148 commit 40fd626223eae5363719bcb9a6896f08ceeee90a
2149 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2150 Date: Sun Mar 29 23:01:41 2009 +0200
2152 s3c44b0: move serial driver to drivers/serial
2154 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2156 commit 5fe1377cc46199fe71c47be4b1aa81440ae96f9f
2157 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2158 Date: Sun Mar 29 23:01:40 2009 +0200
2160 s3c44b0: move rtc driver to drivers/rtc
2162 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2164 commit 50f601cca8985615f9e3de4c34887448ade8a64b
2165 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2166 Date: Sun Mar 29 23:01:40 2009 +0200
2168 s3c44b0: move i2c driver to drivers/i2c
2170 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2172 commit 281dfb0c0c531194f99e60d6285cca4e2a9fb1b6
2173 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2174 Date: Sun Mar 29 23:01:36 2009 +0200
2176 s3c4510b: move specific code to soc directory
2178 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2180 commit 04531f3c11c693dc54924f82c41979d960309c9d
2181 Author: Ladislav Michl <ladis@linux-mips.org>
2182 Date: Wed Mar 25 23:43:58 2009 +0100
2184 NetStar: add RTC support
2188 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2190 commit 71f7bd305d9768bcb7ddbe4b5823cbf3b3597b11
2191 Author: Ladislav Michl <ladis@linux-mips.org>
2192 Date: Wed Mar 25 23:43:50 2009 +0100
2194 NetStar: use generic flash driver
2196 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2198 commit 3f464b0fc009d41d2734c08e472eb6d445f73a5c
2199 Author: Ladislav Michl <ladis@linux-mips.org>
2200 Date: Mon Mar 16 23:31:20 2009 +0100
2202 NetStar: update crcit utility
2204 Make crc32 function to match its prototype. Use more meaningful identifiers.
2206 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2208 commit 488f5d8790c451fc527fe5d2ef218f2a5e40ea17
2209 Author: Ladislav Michl <ladis@linux-mips.org>
2210 Date: Mon Mar 23 17:46:27 2009 +0100
2212 Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2214 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2216 commit 88685b5f62274167ad2ba8a58e108d89ff71955b
2217 Author: Wolfgang Denk <wd@denx.de>
2218 Date: Sun Mar 29 00:58:16 2009 +0100
2220 VCMA9: fix compile errors
2223 cmd_vcma9.c:82: warning: implicit declaration of function 'eth_getenv_enetaddr'
2224 cmd_vcma9.c:89: error: 'enetaddr' undeclared (first use in this function)
2226 Signed-off-by: Wolfgang Denk <wd@denx.de>
2228 commit 26e42cbd786241fec370a0b92ad591f4e9cc423b
2229 Author: Wolfgang Denk <wd@denx.de>
2230 Date: Sun Mar 29 00:54:21 2009 +0100
2232 ARM: fix warning: 'print_eth' defined but not used
2234 This warning got issued for all ARM systems that don't have
2235 CONFIG_CMD_NET enabled.
2237 Signed-off-by: Wolfgang Denk <wd@denx.de>
2239 commit fd88d91a639ce41b825c8d50dc2182050e98fe53
2240 Author: Ladislav Michl <ladis@linux-mips.org>
2241 Date: Mon Mar 23 18:16:34 2009 +0100
2245 cs8900.c: In function 'eth_init':
2246 cs8900.c:164: warning: passing argument 2 of 'eth_getenv_enetaddr' from incompatible pointer type
2247 cs8900.c:165: error: invalid operands to binary <<
2248 cs8900.c:166: error: invalid operands to binary <<
2249 cs8900.c:167: error: invalid operands to binary <<
2251 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2252 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2254 commit d2567be915036720693f3ddd00c39b5b4d86fb8d
2255 Author: Wolfgang Denk <wd@denx.de>
2256 Date: Sat Mar 28 20:16:16 2009 +0100
2258 Fix implicit declaration of function 'eth_[gs]etenv_enetaddr'
2260 ...and some other compile warnings.
2262 Signed-off-by: Wolfgang Denk <wd@denx.de>
2264 commit 97b05d7d524a6b4f195f07b8f90e98561a85596c
2265 Author: Wolfgang Denk <wd@denx.de>
2266 Date: Sat Mar 28 16:17:29 2009 +0100
2268 mpc8xx/ether.c: fix warning: unused variable 'bd'
2270 Also minor coding style cleanup.
2272 Signed-off-by: Wolfgang Denk <wd@denx.de>
2274 commit 2dce551e10728f9e5655279f761f1d3cc0a8fe90
2275 Author: Detlev Zundel <dzu@denx.de>
2276 Date: Wed Mar 25 17:27:52 2009 +0100
2278 command.c: Expose the core of do_help as _do_help to the rest of u-boot.
2280 Other commands implementing subcommands can reuse this code nicely.
2282 Signed-off-by: Detlev Zundel <dzu@denx.de>
2283 Signed-off-by: Andreas Pfefferle <ap@denx.de>
2285 commit 4e325fbfa4dea04eceb6392e00807c40d214dc6f
2286 Author: Detlev Zundel <dzu@denx.de>
2287 Date: Tue Mar 24 18:02:33 2009 +0100
2289 mpc5xxx: Add structure definition for several more register blocks.
2291 Signed-off-by: Detlev Zundel <dzu@denx.de>
2293 commit 739b0e594677a0676577bc95db4495a5563fc7f8
2294 Author: Detlev Zundel <dzu@denx.de>
2295 Date: Fri Mar 27 15:03:55 2009 +0100
2297 MAINTAINERS: Add entry for 'inka4x0' board.
2299 Signed-off-by: Detlev Zundel <dzu@denx.de>
2301 commit e55ecec45340755ef47cbbb13fb35ceed60eb115
2302 Author: Detlev Zundel <dzu@denx.de>
2303 Date: Fri Mar 27 15:03:54 2009 +0100
2305 MAINTAINERS: Keep list sorted.
2307 Signed-off-by: Detlev Zundel <dzu@denx.de>
2309 commit 0baeca4b09b703728f8e66b52418039fd8f8ce35
2310 Author: Mike Frysinger <vapier@gentoo.org>
2311 Date: Thu Mar 26 11:17:41 2009 -0400
2313 karef/metrobox/xpedite1k: fix eth_setenv_enetaddr typos
2315 The function is called "eth_setenv_enetaddr", not "eth_putenv_enetaddr".
2317 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2318 CC: Ben Warren <biggerbadderben@gmail.com>
2320 commit 76756e41cde0a617e781a604cc47dfaef63697cd
2321 Author: Heiko Schocher <hs@denx.de>
2322 Date: Thu Mar 26 07:33:59 2009 +0100
2324 ppc: cleanup compiler errors/warnings
2326 Current u-boot top of tree builds with warnings/errors for
2327 the following boards:
2329 ads5121 cpci5200 mecp5200 v38b IAD210 MBX MBX860T NX823
2330 RPXClassic debris PN62
2332 following patch solves this.
2334 Signed-off-by: Heiko Schocher <hs@denx.de>
2335 Acked-by: Mike Frysinger <vapier@gentoo.org>
2337 commit 3edf68c47fdd52f19c1e840771c19ba90cf5ced1
2338 Author: Stefan Roese <sr@denx.de>
2339 Date: Thu Mar 26 16:14:13 2009 +0100
2341 ppc4xx: Sequoia: Fix TLB reassignment in NAND booting code
2343 This patch fixes a bug in the Sequoia TLB init code to reconfigure
2344 the correct TLB (boot space) after running from RAM. This bug was
2345 introduced with patch 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
2346 [ppc4xx: Make Sequoia boot vxWorks] which changed the order of the
2347 TLB in the Sequoia init.S file.
2349 Signed-off-by: Stefan Roese <sr@denx.de>
2351 commit e2b66fe453a3679f807b37fc5923d89214302764
2352 Author: Wolfgang Denk <wd@denx.de>
2353 Date: Thu Mar 26 10:00:57 2009 +0100
2355 ads5121: enable instruction cache
2357 Enabling the instruction cache significantly accelerates U-Boot
2358 operations like CRC checking, image uncompression, etc.
2360 Kudos to Andrea Scian for pointing out.
2362 Signed-off-by: Wolfgang Denk <wd@denx.de>
2364 commit 33e88c557b29c84c52039ba05993fa70fe62afe3
2365 Author: Jon Smirl <jonsmirl@gmail.com>
2366 Date: Sun Mar 22 22:55:45 2009 -0400
2368 mpc5200: suppress printf until console initialized
2370 On boards which have the environment in eeprom, i2c_init() is called
2371 before the console and RAM are initialized.
2372 Suppress printfs until the console is initialized.
2374 Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
2375 Acked-by: Heiko Schocher <hs@denx.de>
2377 commit 0c6926736effbb9a19047949b7e9b3e8feab7c46
2378 Author: Guennadi Liakhovetski <lg@denx.de>
2379 Date: Wed Mar 25 11:36:50 2009 +0100
2381 ARM: Add the imx31_phycore_eet board to MAKEALL
2383 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
2385 commit 917cfc70c18b74fa8a80189bdce8395199fa8360
2386 Author: Nishanth Menon <nm@ti.com>
2387 Date: Wed Mar 25 22:13:56 2009 +0100
2389 OMAP3:Beagle: Enable mtdparts
2391 http://www.denx.de/wiki/DULG/UBootCmdGroupFlash#UBootCmdFlMtdparts
2392 provides a flexible way to create and maintain u-boot mtd
2393 partitions. This allows commands such as "nand erase fs"
2394 to work and the user no longer needs to decode the absolute
2395 nand offsets. This patch enables this function for beagleboard
2397 Signed-off-by: Nishanth Menon <nm@ti.com>
2398 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2400 commit 4de1a5daab079ddc8ce1274144700203d692105c
2401 Author: Mike Frysinger <vapier@gentoo.org>
2402 Date: Sun Feb 22 16:26:35 2009 -0500
2404 Blackfin: bf537-stamp: split post code out into dedicated post.c
2406 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2408 commit 5e8f245743ed14c89e495ba2c027703db9813160
2409 Author: Mike Frysinger <vapier@gentoo.org>
2410 Date: Sat Oct 11 22:51:56 2008 -0400
2412 Blackfin: add support for S25FL128 parts
2414 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2416 commit bf1e028bf3eab1d702fa0627cade4460688f3913
2417 Author: Mike Frysinger <vapier@gentoo.org>
2418 Date: Sat Oct 11 22:51:23 2008 -0400
2420 Blackfin: overhaul SPI flash handling to speed things up
2422 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2424 commit efcc08cededa2168b96f12a22a5872340880d334
2425 Author: Mike Frysinger <vapier@gentoo.org>
2426 Date: Sat Oct 11 22:51:05 2008 -0400
2428 Blackfin: add support for SST SPI flashes
2430 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2432 commit 5b8cfbe63f7242ebb1008f30bbbc85a9d54b38cf
2433 Author: Mike Frysinger <vapier@gentoo.org>
2434 Date: Sat Oct 11 22:50:10 2008 -0400
2436 Blackfin: add hack for crappy m25p80
2438 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2440 commit 6f5fd56f0832ea5c254e2e4be84ea21fc8ecd5c5
2441 Author: Mike Frysinger <vapier@gentoo.org>
2442 Date: Wed Jan 21 20:47:12 2009 -0500
2444 Blackfin: bf537-stamp: increase monitor size
2446 The new jffs2 code pushed the code size just over the limit, so increase
2447 the limit a bit more.
2449 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2451 commit f82caaccc87e1f76448ff42a6b930e59797e4f65
2452 Author: Mike Frysinger <vapier@gentoo.org>
2453 Date: Mon Dec 8 16:16:11 2008 -0500
2455 Blackfin: bf537-stamp: bump default SCLK up to 125MHz
2457 Since all of the bf537-stamp and bf537-ezkit boards out there can handle it,
2458 increase the speed of SCLK to 125MHz rather than 100MHz.
2460 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2462 commit 751e54c3b77311b720b794813cce20546f288ada
2463 Author: Mike Frysinger <vapier@gentoo.org>
2464 Date: Sat Oct 11 22:44:14 2008 -0400
2466 Blackfin: bf537-stamp: rewrite MAC-in-flash handling
2468 Use the common net eth functions to setup the env/global data with the MAC
2469 address, and properly handle the case where CONFIG_SYS_NO_FLASH is defined.
2471 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2473 commit 88f9faffb383bbc6f23b8cc8519c5ffecfa2c8ad
2474 Author: Mike Frysinger <vapier@gentoo.org>
2475 Date: Tue Dec 9 13:47:39 2008 -0500
2477 Blackfin: add clkin_hz= to default kernel command line for ADI boards
2479 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2481 commit 9f64ba2412d3cede9eb1f290987e5c3a28df3232
2482 Author: Mike Frysinger <vapier@gentoo.org>
2483 Date: Sun Oct 12 23:49:13 2008 -0400
2485 Blackfin: bf533-stamp: bump up default clocks
2487 Since the hardware can handle it, bump the default clocks from 80mhz SCLK
2488 and 398mhz CCLK to 100mhz SCLK and 498mhz CCLK.
2490 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2492 commit 23fd959eeaaa0434ac7f9c1191de66c76d97d699
2493 Author: Mike Frysinger <vapier@gentoo.org>
2494 Date: Sat Oct 11 22:40:22 2008 -0400
2496 Blackfin: bf533-stamp: rewrite startup LED notifications
2498 Again, don't clobber pins that we aren't actually using, and use the common
2499 LED framework rather than our own hob-job-but-not-really-working.
2501 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2503 commit cf6f469e2730fc8ab3523808b828be000d6eee77
2504 Author: Mike Frysinger <vapier@gentoo.org>
2505 Date: Sun Jun 1 09:09:48 2008 -0400
2507 Blackfin: unify common ADI board settings
2509 Rather than duplicate the same ADI settings in every ADI board, create a
2510 common ADI config header and have all ADI boards start using that. This
2511 will also make merging the ~10 boards I have to forward port a lot easier.
2513 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2515 commit 196c74311f394c6eb08bd9ab07a35671299b9851
2516 Author: Kyungmin Park <kmpark@infradead.org>
2517 Date: Tue Mar 3 09:05:53 2009 +0900
2519 Reduce OneNAND IPL common code
2521 OneNAND IPL has common codes for RAM init, load data, and jump to 2nd
2522 bootloader, but it's common code used about 300~400 bytes. So board
2523 specific codes, such as lowlevel_init, can't has enough code. It make
2524 a difficult to implement OneNAND IPL.
2526 his patch make this common code as small as possible. and give
2527 lowlevel_init can have more codes.
2529 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2530 Signed-off-by: Scott Wood <scottwood@freescale.com>
2532 commit 16f2f5a351004129e79e79816697a367fd9e5446
2533 Author: Wolfgang Grandegger <wg@grandegger.com>
2534 Date: Wed Feb 11 18:38:24 2009 +0100
2536 Add multi-chip NAND support for the TQM8548 modules
2538 This patches configures the NAND UPM-FSL driver with multi-chip
2539 support for the Micron MT29F8G08FAB NAND flash memory on the
2542 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2543 Signed-off-by: Scott Wood <scottwood@freescale.com>
2545 commit 33846df28fa1f4cf96a96c18142d48d813caa892
2546 Author: Wolfgang Grandegger <wg@grandegger.com>
2547 Date: Wed Feb 11 18:38:23 2009 +0100
2549 Add wait flags to support board/chip specific delays
2551 The NAND flash on the TQM8548_BE modules requires a short delay after
2552 running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE
2553 requires a further short delay after writing out a buffer. Normally the
2554 R/B pin should be checked, but it's not connected on the TQM8548_BE.
2555 The corresponding Linux FSL UPM driver uses similar delay points at the
2556 same locations. To manage these extra delays in a more general way, I
2557 introduced the "wait_flags" field allowing the board-specific driver to
2558 specify various types of extra delay.
2560 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2561 Signed-off-by: Scott Wood <scottwood@freescale.com>
2563 commit 06e9f7df054d26d7f49c56bf9a6844b193ad6313
2564 Author: Wolfgang Grandegger <wg@grandegger.com>
2565 Date: Wed Feb 11 18:38:22 2009 +0100
2567 Add support for TQM-specific chip select logic to FSL-UPM
2569 For the NAND chips on the TQM8548 modules, a special chip-select logic is
2570 used. It uses dedicated address lines to be set via UPM machine address
2571 register (mar). This patch adds such support to the FSL-UPM driver.
2573 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2574 Signed-off-by: Scott Wood <scottwood@freescale.com>
2576 commit e93c1c169d49eda7babad9c781f541e2e34f0ff0
2577 Author: Wolfgang Grandegger <wg@grandegger.com>
2578 Date: Wed Feb 11 18:38:21 2009 +0100
2580 Add multi chip support to the FSL-UPM driver
2582 This patch adds support for multi-chip NAND devices to the FSL-UPM
2583 driver. The "dev_ready" callback of the "struct fsl_upm_nand" is now
2584 called with the argument "chip_nr" to allow testing the proper chip
2585 select line. The NAND support of the MPC8360ERDK is updated as well.
2586 No other boards are currently using the FSL UPM driver.
2588 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2589 Signed-off-by: Scott Wood <scottwood@freescale.com>
2591 commit 672ed2aee91b4856f6671fc72cd34168d8f1b624
2592 Author: Wolfgang Grandegger <wg@grandegger.com>
2593 Date: Wed Feb 11 18:38:20 2009 +0100
2595 Enable multi chip support in the NAND layer
2597 This patch adds support for NAND_MAX_CHIPS to the MTD NAND layer.
2598 Multi-chips devices are displayed as shown:
2600 Device 0: 2x NAND 512MiB 3,3V 8-bit, sector size 128 KiB
2602 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
2603 Signed-off-by: Scott Wood <scottwood@freescale.com>
2605 commit 74398b23f9c2ffdc137fd92910a46e3333fb93f9
2606 Author: Mike Frysinger <vapier@gentoo.org>
2607 Date: Sat Oct 11 21:58:33 2008 -0400
2609 Blackfin: put memory into self-refresh before/after programming clocks
2611 When initializing the core clocks, stick external memory into self-refresh.
2612 This gains us a few cool things:
2613 - support suspend-to-RAM with Linux
2614 - reprogram clocks automatically when doing "go" on u-boot.bin in RAM
2615 - make sure settings are stable before flashing new version
2616 - finally fully unify initialize startup code path between LDR/non-LDR
2618 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2620 commit d347d572ab1f2d47bf257c9f7ca2e602038a136b
2621 Author: Mike Frysinger <vapier@gentoo.org>
2622 Date: Sat Oct 11 21:56:08 2008 -0400
2624 Blackfin: do not program voltage regulator on parts that do not have one
2626 Some newer Blackfins (like the BF51x) do not have an on-chip voltage
2627 regulator, so do not attempt to program the memory as if it does.
2629 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2631 commit 0d4f24b70f7a979f58174f3eb271874950b551b6
2632 Author: Mike Frysinger <vapier@gentoo.org>
2633 Date: Sun Jun 1 01:28:24 2008 -0400
2635 Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers
2637 If the board config does not specify an explicit EBIU_SDBCTL value, set it
2638 up with sane values based on other configuration options.
2640 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2642 commit 3986e981f565c08f10c7e526af8cb518d741c349
2643 Author: Mike Frysinger <vapier@gentoo.org>
2644 Date: Sat Dec 6 18:06:58 2008 -0500
2646 Blackfin: handle reboot anomaly 432
2648 Workaround anomaly 432:
2649 The bfrom_SysControl() firmware function does not clear the SIC_IWR1
2650 register before executing the PLL programming sequence. Therefore, any
2651 interrupt enabled in the SIC_IWR1 register prior to the call to
2652 bfrom_SysControl() can prematurely terminate the idle sequence required
2653 for the PLL to relock properly. SIC_IWR0 is properly handled.
2655 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2657 commit 7e1d212b6da492c6ea32c62af92e185284f41291
2658 Author: Mike Frysinger <vapier@gentoo.org>
2659 Date: Sat Oct 18 04:04:49 2008 -0400
2661 Blackfin: kill off LDR jump block
2663 The Boot ROM uses EVT1 as the entry point so set that rather than having
2664 to use a tiny jump block in the default EVT1 location.
2666 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2668 commit a75fa148d60b1975403441e45565621bba50d2d9
2669 Author: Mike Frysinger <vapier@gentoo.org>
2670 Date: Tue Jan 6 10:00:48 2009 -0500
2672 Blackfin: simplify symbol_lookup() a bit
2674 No need to skip a byte as the symbol table handles this.
2676 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2678 commit 59f0978a7e78d20277ddbde7caf0ea877f3cfd98
2679 Author: Mike Frysinger <vapier@gentoo.org>
2680 Date: Sat Feb 7 05:43:21 2009 -0500
2682 Blackfin: fix SIC_RVECT definition: it is 16bits, not 32bits
2684 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2686 commit 58130f8920151d9e8942bbdf3388f2defb47e415
2687 Author: Mike Frysinger <vapier@gentoo.org>
2688 Date: Sat Feb 7 05:41:17 2009 -0500
2690 Blackfin: drop SPORT_TX read helper macros
2692 The SPORT_TX registers cannot be read (the hardware will trigger an error),
2693 so drop the read helper macros.
2695 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2697 commit 820b076c449688bcd4af6db5a33ae424d1a60d0e
2698 Author: Mike Frysinger <vapier@gentoo.org>
2699 Date: Sat Feb 7 05:25:35 2009 -0500
2701 Blackfin: unify duplicate CPU port definitions
2703 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2705 commit 744fd240d181b0b05b1436e1b655c9a62526c752
2706 Author: Mike Frysinger <vapier@gentoo.org>
2707 Date: Fri Feb 6 00:59:50 2009 -0500
2709 Blackfin: drop now-unused CONFIG_SYS_BFIN_CMD_XXX
2711 With the new CONFIG_XXX system and CONFIG_CMD_XXX handling, these defines
2712 are no longer used/needed.
2714 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2716 commit 45c48953e8a4038bd49c46813fcff5a207867ae4
2717 Author: Mike Frysinger <vapier@gentoo.org>
2718 Date: Mon Oct 6 04:01:26 2008 -0400
2720 Blackfin: print out Flash: before checking it
2722 If there is some problem in the flash init/checking code, it's nicer to see
2723 the message "Flash:" before crashing. This way the source of the problem
2724 is a bit more straightforward.
2726 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2728 commit 1c7a79a04eb916f685f7275520b5eea6968a1559
2729 Author: Mike Frysinger <vapier@gentoo.org>
2730 Date: Thu Aug 7 15:33:09 2008 -0400
2732 Blackfin: safely flush data caches when in writeback mode
2734 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2736 commit c06f2b13022703611bc3e512bd34f9014a46f448
2737 Author: Mike Frysinger <vapier@gentoo.org>
2738 Date: Thu Aug 7 13:21:48 2008 -0400
2740 Blackfin: update lockbox api according to latest documentation
2742 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2744 commit 2decc2a8d17a5397cb5956e46c8466c736e305a2
2745 Author: Mike Frysinger <vapier@gentoo.org>
2746 Date: Sat Oct 11 21:49:06 2008 -0400
2748 Blackfin: mark bfin_reset static
2750 The function is only used locally, so mark it static.
2752 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2754 commit 974473caa732f63312687ef2bd2d22dad8e99b9a
2755 Author: Sonic Zhang <Sonic.Zhang@analog.com>
2756 Date: Fri Mar 20 19:28:20 2009 -0400
2758 Blackfin: spi: there is no PORTJ_FER MMR on BF537
2760 Since the PORTJ on the BF537 is peripheral-only (no GPIO functionality),
2761 then there is no PORTJ_FER register for us to worry about.
2763 Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
2764 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2766 commit e82b762f293debc53c5afa90f37264f6b07520f9
2767 Author: Mike Frysinger <vapier@gentoo.org>
2768 Date: Tue Mar 17 13:58:23 2009 -0400
2770 Blackfin: fix jtag console tstc
2772 The jtag tstc operation was checking the hardware to see if data is
2773 available from it (which is fine for the jtag getc operation), but the
2774 higher layers need to know whether any data is available. Since we have
2775 to read up to 4 bytes at a time from the hardware, the higher layers need
2776 to know they can consume the cached bytes as well.
2778 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2780 commit bc683f58b1f1d8d20546fe019483967a51a49df1
2781 Author: Mike Frysinger <vapier@gentoo.org>
2782 Date: Sun Feb 22 16:23:41 2009 -0500
2784 Blackfin: bf537-stamp: move CONFIG_POST handling to COBJS-$(...)
2786 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2788 commit 8996d1608acb8f59fcb186dc7ed7d87f8fee1297
2789 Author: Mike Frysinger <vapier@gentoo.org>
2790 Date: Sun Feb 22 16:02:27 2009 -0500
2792 Blackfin: unify net-related init code
2794 Unify all of the net-related init code in the common Blackfin board init
2795 code to clean up the ifdef mess a bit.
2797 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2799 commit c6ea30e52ea82af4858d2b6f99e0fd2ea276d657
2800 Author: Mike Frysinger <vapier@gentoo.org>
2801 Date: Wed Feb 18 12:51:48 2009 -0500
2803 Blackfin: fix SWRST/SYSCR register sizes
2805 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2807 commit a9d6777d39154978b9ef9c682b2627a3480b194c
2808 Author: Mike Frysinger <vapier@gentoo.org>
2809 Date: Wed Feb 18 12:51:31 2009 -0500
2811 Blackfin: update anomaly lists
2813 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2815 commit 4d7c32dad2e787f890ebcd51bfb723a126913c90
2816 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2817 Date: Thu Mar 19 18:31:38 2009 +0100
2819 avr32: fix cacheflush.h location introducted by d8f2aa3298610b
2821 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2822 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2824 commit 3a3baf3ee61e6b28af3b49ebabc9ab4f6015aa48
2825 Author: Eric Schumann <E.Schumann@phytec.de>
2826 Date: Sat Mar 21 09:59:34 2009 -0400
2828 Make flash protection work, when the environment is in EEPROM
2830 On the pcm030 the environment is located in the onboard EEPROM. But we want
2831 to handle flash sector protection in a safe manner. So we must read the
2832 unlock environment variable from EEPROM instead from flash.
2834 This patch is required as long the evironment is saved into the EEPROM.
2836 Stefan: Additional change as suggested by Wolfgang, use bigger char array
2839 Signed-off-by: Eric Schumann <E.Schumann@phytec.de>
2840 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2841 Acked-by: Wolfgang Denk <wd@denx.de>
2842 Signed-off-by: Stefan Roese <sr@denx.de>
2844 commit de3ce8c59f48f99779d7d7379a5432ded12ec06c
2845 Author: Jon Smirl <jonsmirl@gmail.com>
2846 Date: Sat Mar 21 11:17:56 2009 -0400
2848 Add define for mpc5200 CDM_CLK_ENA
2850 Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
2852 commit df486b1fa3f750b153eac7daa0b3bf1f594e5098
2853 Author: Nicolas Ferre <nicolas.ferre@atmel.com>
2854 Date: Sun Mar 22 14:48:16 2009 +0100
2856 at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
2858 AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed.
2860 The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board.
2861 It is essentially the same, with a few minor differences.
2863 Here is the chip page on Atmel website:
2864 http://www.atmel.com/dyn/products/product_card.asp?part_id=4337
2866 Signed-off-by: Justin Waters <justin.waters@timesys.com>
2867 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2868 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2870 commit 118d168035cc93f586da4812c89cb153eb9f4243
2871 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2872 Date: Sun Mar 22 14:28:14 2009 +0100
2874 cmc_pu2: fix implicit declaration of function 'eth_setenv_enetaddr'
2876 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2878 commit 176c4a982c6531f96426afaa1126cf9a5e2d5e03
2879 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2880 Date: Sun Mar 22 14:28:13 2009 +0100
2882 cmc_pu2: fix misc_init_r prototype
2884 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2886 commit 53158aea995221706b42c7bad9f717b31ae20414
2887 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2888 Date: Sun Jan 11 03:32:01 2009 +0100
2890 at91sam9xeek: fix soc name
2892 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2894 commit 74c076d6c33d6d42ab065541a38383587879e7b7
2895 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2896 Date: Sun Mar 22 10:22:34 2009 +0100
2898 at91sam9/at91cap: move nand drivers to drivers/mtd/nand
2900 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2902 commit 163966087d62680547f188a93c61d01c8155254e
2903 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2904 Date: Sat Mar 21 21:08:01 2009 +0100
2906 atmel/at91/boards: compile dataflash partition only when dataflash is
2908 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2910 commit e2c0476f958f8e0b269a1118f4ba4a5cd475aa56
2911 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2912 Date: Sat Mar 21 21:08:00 2009 +0100
2914 at91sam9/at91cap: move common macb initialisation to cpu
2916 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2918 commit f3f91f886bc8927fd692ac411b7423a87ffec532
2919 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2920 Date: Sat Mar 21 21:08:00 2009 +0100
2922 at91sam9/at91cap: move common usb host initialisation to cpu
2924 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2926 commit a484b00b86e72ac6da6ee4fce13dbc6b256672fe
2927 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2928 Date: Sat Mar 21 21:08:00 2009 +0100
2930 at91sam9/at91cap: move common led management to cpu
2932 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2934 commit 7ebafb7ec1a0285af8380623c009576f92583b98
2935 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2936 Date: Sat Mar 21 21:07:59 2009 +0100
2938 at91sam9/at91cap: move common spi initialisation to cpu
2940 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2942 commit 1332a2a0694c8e10a5bade397cf83645b2c3fd7e
2943 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2944 Date: Sat Mar 21 21:07:59 2009 +0100
2946 at91sam9/at91cap: move common serial initialisation to cpu
2948 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2950 commit e60beb13cf0135dc71c541021487b5ccc4d269cb
2951 Author: Wolfgang Denk <wd@denx.de>
2952 Date: Sat Mar 21 22:04:41 2009 +0100
2958 Signed-off-by: Wolfgang Denk <wd@denx.de>
2960 commit 9e78dae2b276c5bf9ab92cd85173f6cb92b1b7d5
2961 Author: Vivek Kutal <vivek.kutal@azingo.com>
2962 Date: Mon Feb 23 21:35:11 2009 +0530
2964 Replaced endpoint numbers with appropriate macros in usbtty.c.
2966 Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
2967 Signed-off-by: Remy Bohmer <linux@bohmer.net>
2969 commit faac4fd852e39cb1d7a740801b060e41aeacef1f
2970 Author: Michael Lawnick <ml.lawnick@gmx.de>
2971 Date: Thu Mar 19 10:06:41 2009 +0100
2973 UBIFS: Missing offset relocation for compressor 'none'
2975 On systems where U-Boot is linked to another address than it really lays
2976 (e.g. backup image), calls via function pointers must be fixed with a
2978 This was not done for none_compr in ubifs_compressors_init() what leads
2979 to system crash on ubifsmount command.
2981 Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de>
2982 Acked-by: Stefan Roese <sr@denx.de>
2984 commit ce6d0c8de031f345bde745f3b855082adf1c4e45
2985 Author: Stefan Roese <sr@denx.de>
2986 Date: Thu Mar 19 15:35:50 2009 +0100
2988 UBIFS: Add UBIFS commands
2990 This patchset adds these UBIFS related commands:
2993 Mount an UBIFS volume
2996 List a directory of the mounted UBIFS volume
2999 Load a file from the mounted UBIFS volume to memory
3001 Signed-off-by: Stefan Roese <sr@denx.de>
3003 commit 9eefe2a2b37a838558e3d213a9f5519503d0c180
3004 Author: Stefan Roese <sr@denx.de>
3005 Date: Thu Mar 19 15:35:05 2009 +0100
3007 UBIFS: Implement read-only UBIFS support in U-Boot
3009 The U-Boot UBIFS implementation is largely a direct copy from the current
3010 Linux version (2.6.29-rc6). As already done in the UBI version we have an
3011 "abstraction layer" to redefine or remove some OS calls (e.g. mutex_lock()
3012 ...). This makes it possible to use the original Linux code with very
3013 little changes. And by this we can better update to later Linux versions.
3015 I removed some of the Linux features that are not used in the U-Boot
3016 version (e.g. garbage-collection, write support).
3018 Signed-off-by: Stefan Roese <sr@denx.de>
3019 CC: Artem Bityutskiy <dedekind@infradead.org>
3020 CC: Adrian Hunter <ext-Adrian.Hunter@nokia.com>
3022 commit b1b4e89a0f3b75854c39a62cae41bad56d210adf
3023 Author: Stefan Roese <sr@denx.de>
3024 Date: Thu Mar 19 15:34:56 2009 +0100
3026 Add LZO decompressor support
3028 This patch adds LZO decompression support to U-Boot. It is needed for
3029 the upcoming UBIFS support, since UBIFS uses LZO as default compressor/
3030 decompressor. Since we only support read-only in UBIFS, only the
3031 decompressor is needed.
3033 All this is copied with minor changes from the current Linux kernel
3034 version (2.6.28-rc8).
3036 This patch only implements this LZO decompressor support for PPC.
3037 Other platforms using UBIFS will have to add the required
3038 "include/asm/unaligned.h" as well. It should be fairly easy to copy this
3039 from the Linux source tree as I have done it for PPC in this patch.
3041 Signed-off-by: Stefan Roese <sr@denx.de>
3043 commit 68d7d65100e84df00bca971c114092731b441090
3044 Author: Stefan Roese <sr@denx.de>
3045 Date: Thu Mar 19 13:30:36 2009 +0100
3047 Separate mtdparts command from jffs2
3049 Currently the mtdparts commands are included in the jffs2 command support.
3050 This doesn't make sense anymore since other commands (e.g. UBI) use this
3051 infrastructure as well now. This patch separates the mtdparts commands from
3052 the jffs2 commands making it possible to only select mtdparts when no JFFS2
3055 Signed-off-by: Stefan Roese <sr@denx.de>
3056 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
3058 commit 02a301cd5087eaffdf456e0a5cec1100c4d9a398
3059 Author: Stefan Roese <sr@denx.de>
3060 Date: Wed Feb 25 12:11:15 2009 +0100
3062 powerpc: Only use eth_getenv_enetaddr() if networking is enabled
3064 Signed-off-by: Stefan Roese <sr@denx.de>
3066 commit 5c4fa9b474af95d60f019ec6369cbe77b9dab4b5
3067 Author: Grzegorz Bernacki <gjb@semihalf.com>
3068 Date: Tue Mar 17 10:06:40 2009 +0100
3070 Add support for the digsy MTC board.
3072 This is the InterControl custom device based on the MPC5200B chip.
3074 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3076 commit ff7dc067369e30066744f096995aef7d97574d15
3077 Author: Stefan Roese <sr@denx.de>
3078 Date: Mon Feb 23 16:52:36 2009 +0100
3080 powerpc: Fix compilation warning in board.c
3084 board.c: In function 'board_init_r':
3085 board.c:653: warning: unused variable 'i'
3086 board.c:651: warning: unused variable 'e'
3088 Signed-off-by: Stefan Roese <sr@denx.de>
3090 commit 9cd690160d3ce1a7fb4ceeee6c99cedb1ac1d49c
3091 Author: Stefan Roese <sr@denx.de>
3092 Date: Mon Feb 23 16:42:51 2009 +0100
3094 ppc4xx: Don't write the MAC address into the internal SoC registers
3096 Remove this code. It's not needed. The 4xx EMAC driver stores the MAC
3097 addresses into the SoC registers instead.
3099 Signed-off-by: Stefan Roese <sr@denx.de>
3101 commit bb57ad4be76d0e2e7f9ec56678235cc9872ff40f
3102 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3103 Date: Fri Feb 20 10:19:19 2009 +0100
3105 ppc4xx: Use correct io accessors for esd 405/440 boards
3107 This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
3108 macros. Also volatile pointer references are replaced by the
3111 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3112 Signed-off-by: Stefan Roese <sr@denx.de>
3114 commit 049216f045fd8e0f45bcef121c2bb1c7d3de6988
3115 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3116 Date: Fri Feb 20 10:19:18 2009 +0100
3118 ppc4xx: Use correct io accessors for esd 405 boards
3120 This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
3121 macros. Also volatile pointer references are replaced by the
3124 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3125 Signed-off-by: Stefan Roese <sr@denx.de>
3127 commit a59205d1519375d027f97a545ad642ab20fce6f8
3128 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3129 Date: Fri Feb 20 10:19:17 2009 +0100
3131 ppc4xx: Cleanup linker scripts of esd 4xx boards
3133 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3134 Signed-off-by: Stefan Roese <sr@denx.de>
3136 commit 2f103ee284e68934a648732db5e0b6ceb4a1ed8f
3137 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3138 Date: Fri Feb 20 10:19:16 2009 +0100
3140 ppc4xx: Update TEXT_BASE for DASA_SIM boards
3142 Fix building DASA_SIM boards by increasing U-Boot's size in flash.
3144 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3145 Signed-off-by: Stefan Roese <sr@denx.de>
3147 commit 09db8f4de6805f1dde510c167f20e56a5405d29e
3148 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3149 Date: Fri Feb 20 10:19:15 2009 +0100
3151 ppc4xx: DU405 maintenance fix
3153 -strip unused features
3156 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
3157 Signed-off-by: Stefan Roese <sr@denx.de>
3159 commit 75511b47ac2647be48218dbb93af05b21f404f67
3160 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3161 Date: Fri Feb 20 10:19:14 2009 +0100
3163 ppc4xx: Abort autoboot only by space key on CPCI405 boards
3165 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3166 Signed-off-by: Stefan Roese <sr@denx.de>
3168 commit e17ee157ca9ff0d4cc5841d06c4b70c1603df29c
3169 Author: Graeme Russ <graeme.russ@gmail.com>
3170 Date: Tue Feb 24 21:14:56 2009 +1100
3172 Add basic relocation to i386 port
3174 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
3176 commit 8c63d47651f77d9fb887cad433370b866eb0a193
3177 Author: Graeme Russ <graeme.russ@gmail.com>
3178 Date: Tue Feb 24 21:14:45 2009 +1100
3180 Implement SC520 timers
3182 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
3184 commit 6d7f610b09f813b1239eedcbfe921cfd439aea25
3185 Author: Graeme Russ <graeme.russ@gmail.com>
3186 Date: Tue Feb 24 21:14:32 2009 +1100
3188 Factor out SC520 sub-features
3190 Moved sub-features of the SC520 code which is currently selectively compiled
3191 using #ifdef out of sc520.c into individual files selectively compiled via
3194 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
3196 commit abf0cd3dff227cfb6e82ad13be62e28e6e89d5df
3197 Author: Graeme Russ <graeme.russ@gmail.com>
3198 Date: Tue Feb 24 21:13:40 2009 +1100
3200 Rewrite i386 interrupt handling
3202 Rewrite interrupt handling functionality for the i386 port. Separated
3203 functionality into separate CPU and Architecture components.
3205 It appears as if the i386 interrupt handler functionality was intended
3206 to allow multiple handlers to be installed for a given interrupt.
3207 Unfortunately, this functionality was not fully implemented and also
3208 had the problem that irq_free_handler() does not allow the passing
3209 of the handler function pointer and therefore could never be used to
3210 free specific handlers that had been installed for a given IRQ.
3212 There were also various issues with array bounds not being fully
3215 I had two objectives in mind for the new implementation:
3217 1) Keep the implementation as similar as possible to existing
3218 implementations. To that end, I have used the leon2/3
3219 implementations as the reference
3221 2) Seperate CPU and Architecture specific elements. All specific i386
3222 interrupt functionality is now in cpu/i386/ with the high level
3223 API and architecture specific code in lib_i386. Functionality
3224 specific to the PC/AT architecture (i.e. cascaded i8259 PICs) has
3225 been further split out into an individual file to allow for the
3226 implementation of the PIC architecture of the SC520 CPU (supports
3229 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
3231 commit ece444b42b71eb5bce34a24ec584573b3c8c4a98
3232 Author: Graeme Russ <graeme.russ@gmail.com>
3233 Date: Tue Feb 24 21:12:35 2009 +1100
3237 Moved ali512x.h from include/asm-i386/ic/ to /include
3239 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
3241 commit 6d83e3ac61dcdbcb7f04664309a9689fe01c5704
3242 Author: Graeme Russ <graeme.russ@gmail.com>
3243 Date: Tue Feb 24 21:12:20 2009 +1100
3245 Rename SC520 Configuration Options
3247 Options are now all uniformly CONFIG_SYS_SC520_<option>
3249 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
3251 commit f62fb99941c625605aa16a0097b396a5c16d2c88
3252 Author: Trent Piepho <xyzzy@speakeasy.org>
3253 Date: Wed Feb 18 15:22:05 2009 -0800
3255 Fix all linker script to handle all rodata sections
3257 A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
3258 which needs to be added the the linker script. Instead of just adding this
3259 one section, we use a wildcard ".rodata*" to get all rodata linker section
3260 gcc has now and might add in the future.
3262 However, '*(.rodata*)' by itself will result in sub-optimal section
3263 ordering. The sections will be sorted by object file, which causes extra
3264 padding between the unaligned rodata.str.1.1 of one object file and the
3265 aligned rodata of the next object file. This is easy to fix by using the
3266 SORT_BY_ALIGNMENT command.
3268 This patch has not be tested one most of the boards modified. Some boards
3269 have a linker script that looks something like this:
3282 *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
3284 This means the start of rodata will no longer be 16 bytes aligned.
3285 However, the boundary between text and rodata/eh_frame is still aligned to
3286 16 bytes, which is what I think the real purpose of the ALIGN call is.
3288 Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
3290 commit 566b652c7cdb0e5e0529bb3d1eaffbd2bf45a032
3291 Author: Mike Frysinger <vapier@gentoo.org>
3292 Date: Wed Feb 11 18:26:08 2009 -0500
3294 remove bi_enet*addr from global data for all arches
3296 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3297 CC: Ben Warren <biggerbadderben@gmail.com>
3298 CC: Daniel Hellstrom <daniel@gaisler.com>
3299 CC: Michal Simek <monstr@seznam.cz>
3300 CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
3301 CC: Scott McNutt <smcnutt@psyent.com>
3302 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3304 commit eb85aa594c1b57a1e3be9689b65171a137a36432
3305 Author: Mike Frysinger <vapier@gentoo.org>
3306 Date: Wed Feb 11 20:07:19 2009 -0500
3308 ppc: mark global bi_enet*addr as legacy
3310 The environment is the canonical storage location of the mac address, so
3311 we're killing off the global data location and moving everything to
3312 querying the env directly.
3314 In the ppc case, these things are part of the legacy ABI, so keep them
3315 around but mark them as legacy so no new code will touch them.
3317 Also stop calling load_sernum_ethaddr() since all boards now implement
3320 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3321 CC: Ben Warren <biggerbadderben@gmail.com>
3323 commit 9c150102bc1de375d36d97a1cc2dd0e9639b15df
3324 Author: Mike Frysinger <vapier@gentoo.org>
3325 Date: Wed Feb 11 20:09:52 2009 -0500
3327 boards: get mac address from env and move load_sernum_ethaddr() to board init
3329 The environment is the canonical storage location of the mac address, so
3330 we're killing off the global data location and moving everything to
3331 querying the env directly.
3333 Rather than have common ppc code call a board-specific function like
3334 load_sernum_ethaddr(), have each board call it in its own board-specific
3335 misc_init_r() function.
3337 The boards that get converted here are:
3342 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3343 CC: Ben Warren <biggerbadderben@gmail.com>
3344 CC: Stefan Roese <sr@denx.de>
3346 commit 92b50ffef978f05858a0ff4cbe88430bc51a28a2
3347 Author: Mike Frysinger <vapier@gentoo.org>
3348 Date: Wed Feb 11 19:55:01 2009 -0500
3350 cmc_pu2: get mac address from environment
3352 The environment is the canonical storage location of the mac address, so
3353 we're killing off the global data location and moving everything to
3354 querying the env directly.
3356 Also rename load_sernum_ethaddr() to misc_init_r() so we don't need to
3357 handle this board specially in common ARM code.
3359 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3360 CC: Ben Warren <biggerbadderben@gmail.com>
3362 commit d8d21e699d7fcfb6ab11635110266dd09b7edc62
3363 Author: Mike Frysinger <vapier@gentoo.org>
3364 Date: Mon Feb 16 18:03:14 2009 -0500
3366 boards: move board_get_enetaddr() into board-specific init
3368 The environment is the canonical storage location of the mac address, so
3369 we're killing off the global data location and moving everything to
3370 querying the env directly.
3372 Rather than have the common ppc code have board-specific hooks, move the
3373 board_get_enetaddr() function into the board-specific init functions.
3375 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3376 CC: Ben Warren <biggerbadderben@gmail.com>
3378 commit f11e6ff5b1859d9213f0d501b3309e065f487543
3379 Author: Mike Frysinger <vapier@gentoo.org>
3380 Date: Wed Feb 11 19:39:55 2009 -0500
3382 arm: get mac address from environment
3384 The environment is the canonical storage location of the mac address, so
3385 we're killing off the global data location and moving everything to
3386 querying the env directly.
3388 Some warts are remaining and should be killed off (by moving the func to
3389 the appropriate board init code):
3390 - davinci_eth_set_mac_addr
3391 - cs8900_get_enetaddr
3394 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3395 CC: Ben Warren <biggerbadderben@gmail.com>
3397 commit 0107cf66f7346e8c7d6cf0fe99d2f265134afd59
3398 Author: Mike Frysinger <vapier@gentoo.org>
3399 Date: Wed Feb 11 19:36:20 2009 -0500
3401 nx823: get mac address from environment
3403 The environment is the canonical storage location of the mac address, so
3404 we're killing off the global data location and moving everything to
3405 querying the env directly.
3407 For the nx823, the serial number is moved out of load_sernum_ethaddr() and
3408 into misc_init_r() as is the env setup. This lets us kill off the former
3409 function in the process.
3411 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3412 CC: Ben Warren <biggerbadderben@gmail.com>
3414 commit 19b5b533ccd522abeb501d510750693c35e20456
3415 Author: Mike Frysinger <vapier@gentoo.org>
3416 Date: Wed Feb 11 18:27:18 2009 -0500
3418 lib_*/board.c: do not initialize bi_enet*addr in global data
3420 Since everyone is using the environment for mac address storage, there is
3421 no point in seeding the global data.
3423 The arches that are converted here:
3433 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3434 CC: Ben Warren <biggerbadderben@gmail.com>
3435 CC: Daniel Hellstrom <daniel@gaisler.com>
3436 CC: Michal Simek <monstr@seznam.cz>
3437 CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
3438 CC: Scott McNutt <smcnutt@psyent.com>
3439 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3441 commit 740e8ba7d475c49c1b76058e1bf354e376b5c4e0
3442 Author: Mike Frysinger <vapier@gentoo.org>
3443 Date: Wed Feb 11 19:19:54 2009 -0500
3445 npe: get mac address from environment
3447 The environment is the canonical storage location of the mac address, so
3448 we're killing off the global data location and moving everything to
3449 querying the env directly.
3451 The resulting code can also be simplified even further.
3453 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3454 CC: Stefan Roese <sr@denx.de>
3455 CC: Ben Warren <biggerbadderben@gmail.com>
3457 commit 6bacfa6a8e9b264d37c1262fc1f3e948d1feab81
3458 Author: Mike Frysinger <vapier@gentoo.org>
3459 Date: Wed Feb 11 19:18:41 2009 -0500
3461 cpu/: get mac address from environment
3463 The environment is the canonical storage location of the mac address, so
3464 we're killing off the global data location and moving everything to
3465 querying the env directly.
3467 The cpus that get converted here:
3475 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3476 CC: Ben Warren <biggerbadderben@gmail.com>
3477 CC: John Rigby <jrigby@freescale.com>
3478 CC: Stefan Roese <sr@denx.de>
3480 commit 03f3d8d3b39cf85c0ce7ca903b436701e8aa610b
3481 Author: Mike Frysinger <vapier@gentoo.org>
3482 Date: Wed Feb 11 19:09:54 2009 -0500
3484 lan91c96/smc91111/smc911x: get mac address from environment
3486 The environment is the canonical storage location of the mac address, so
3487 we're killing off the global data location and moving everything to
3488 querying the env directly.
3490 Also, do not bother checking the EEPROM if the env is setup. This
3491 simplifies the code greatly.
3493 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3494 Signed-off-by: Wolfgang Dnek <wd@denx.de>
3495 CC: Ben Warren <biggerbadderben@gmail.com>
3496 CC: Rolf Offermanns <rof@sysgo.de>
3497 CC: Erik Stahlman <erik@vt.edu>
3498 CC: Daris A Nevil <dnevil@snmc.com>
3499 CC: Sascha Hauer <s.hauer@pengutronix.de>
3501 commit c527ce92511cbf723c2ca77bee1cf9ecf83dac81
3502 Author: Mike Frysinger <vapier@gentoo.org>
3503 Date: Wed Feb 11 19:14:09 2009 -0500
3505 sh_eth: get mac address from environment
3507 The environment is the canonical storage location of the mac address, so
3508 we're killing off the global data location and moving everything to
3509 querying the env directly.
3511 The sh_eth driver can also be simplified a bit by using enetaddr member of
3512 the eth_device structure.
3514 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3515 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3516 CC: Carlos Munoz <carlos@kenati.com>
3517 CC: Ben Warren <biggerbadderben@gmail.com>
3519 commit 0a5238cea90665c230297a8fd77bb0b3b61ca177
3520 Author: Mike Frysinger <vapier@gentoo.org>
3521 Date: Wed Feb 11 19:06:09 2009 -0500
3523 cs8900: get mac address from environment
3525 The environment is the canonical storage location of the mac address, so
3526 we're killing off the global data location and moving everything to
3527 querying the env directly.
3529 The cs8900 driver also changes slightly in that the hardware is not
3530 consulted if the mac address in the env is sane.
3532 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3533 CC: Marius Groeger <mgroeger@sysgo.de>
3534 CC: Ben Warren <biggerbadderben@gmail.com>
3536 commit c4b8762f11d337e6a9d90c227b2871d65d372469
3537 Author: Mike Frysinger <vapier@gentoo.org>
3538 Date: Wed Feb 11 19:04:25 2009 -0500
3540 bcm570x: get mac address from environment
3542 The environment is the canonical storage location of the mac address, so
3543 we're killing off the global data location and moving everything to
3544 querying the env directly.
3546 Since the address is in the PLM_DEVICE_BLOCK structure already, there is
3547 no need to pass the NodeAddress as a second parameter. So drop the second
3548 argument to the LM_SetMacAddress() function (and update the tigon3 driver
3551 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3552 CC: Ben Warren <biggerbadderben@gmail.com>
3554 commit d3f871482f06f6a4eaf4a3fafde84846bad87b4f
3555 Author: Mike Frysinger <vapier@gentoo.org>
3556 Date: Wed Feb 11 19:01:26 2009 -0500
3558 drivers/net/: get mac address from environment
3560 The environment is the canonical storage location of the mac address, so
3561 we're killing off the global data location and moving everything to
3562 querying the env directly.
3564 The drivers that get converted here:
3579 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3580 CC: Ben Warren <biggerbadderben@gmail.com>
3581 CC: Rolf Offermanns <rof@sysgo.de>
3582 CC: Stefan Roese <sr@denx.de>
3583 CC: Sascha Hauer <saschahauer@web.de>
3584 CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3585 CC: Greg Ungerer <greg.ungerer@opengear.com>
3586 CC: Xue Ligong <lgxue@hotmail.com>
3587 CC: Masami Komiya <mkomiya@sonare.it>
3588 CC: Curt Brune <curt@cucy.com>
3589 CC: Michal SIMEK <monstr@monstr.eu>
3591 commit b6b4625d175019e387e5b0f65a17322a78f6bb90
3592 Author: Mike Frysinger <vapier@gentoo.org>
3593 Date: Wed Feb 11 18:38:38 2009 -0500
3595 boards: get mac address from environment
3597 The boards that get converted here to use the environment for the mac
3598 address rather than global data:
3607 xilinx (the ones that use xilinx_enet)
3609 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3610 CC: Ben Warren <biggerbadderben@gmail.com>
3611 CC: Sangmoon Kim <dogoil@etinsys.com>
3612 CC: Heiko Schocher <hs@denx.de>
3613 CC: David Mueller <d.mueller@elsoft.ch>
3614 CC: Niklaus Giger <niklaus.giger@netstal.com>
3615 CC: Wolfgang Grandegger <wg@denx.de>
3616 CC: Dave Ellis <DGE@sixnetio.com>
3617 CC: Ricardo Ribalda <ricardo.ribalda@uam.es>
3619 commit 06a0c4381a65ed500c816a05b9ae7b207c3b1d4b
3620 Author: Mike Frysinger <vapier@gentoo.org>
3621 Date: Wed Feb 11 18:36:45 2009 -0500
3623 AmigaOneG3SE/enet: get mac address from environment
3625 Always use the MAC address that is stored in the environment first before
3626 falling back to the ROM. This also cuts out any comparison steps: if the
3627 mac in the env is sane, the ROM is never consulted.
3629 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3630 CC: Thomas Frieden <ThomasF@hyperion-entertainment.com>
3631 CC: Ben Warren <biggerbadderben@gmail.com>
3633 commit 56b555a644f3cbb1b3929cb52b61d3ce483885f5
3634 Author: Mike Frysinger <vapier@gentoo.org>
3635 Date: Wed Feb 11 18:52:38 2009 -0500
3637 nvedit: do not update global bi_enetaddr and do not call eth_set_enetaddr()
3639 Since the ethernet layer handles updating of device addresses itself from
3640 the environment, there is no point in calling eth_set_enetaddr().
3642 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3643 CC: Ben Warren <biggerbadderben@gmail.com>
3645 commit 5013533467c1de731c2f0c9beb4b41ce3f07cbeb
3646 Author: Mike Frysinger <vapier@gentoo.org>
3647 Date: Wed Feb 11 18:54:07 2009 -0500
3649 lynxkdi: get mac address from environment
3651 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3652 CC: Ben Warren <biggerbadderben@gmail.com>
3654 commit 62c93d92f1b6266b2f33c5f403931b51cbd2a246
3655 Author: Mike Frysinger <vapier@gentoo.org>
3656 Date: Wed Feb 11 18:51:43 2009 -0500
3658 bootvx: get mac address from environment
3660 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3661 CC: Niklaus Giger <niklaus.giger@member.fsf.org>
3662 CC: Ben Warren <biggerbadderben@gmail.com>
3664 commit de2dff6ff89f98c6062f4d224fd434a3ede035d1
3665 Author: Mike Frysinger <vapier@gentoo.org>
3666 Date: Wed Feb 11 18:50:10 2009 -0500
3668 bdinfo: get mac address from environment
3670 Add a new print_eth() function to automate the eth*addr env var acquisition
3671 and display. Affects all arches.
3673 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3674 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3675 CC: Scott McNutt <smcnutt@psyent.com>
3676 CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
3677 CC: Michal Simek <monstr@seznam.cz>
3678 CC: Daniel Hellstrom <daniel@gaisler.com>
3679 CC: Ben Warren <biggerbadderben@gmail.com>
3681 commit 95823ca0773356860e622ee3304a4b7cafcbf19a
3682 Author: Mike Frysinger <vapier@gentoo.org>
3683 Date: Wed Feb 11 18:23:48 2009 -0500
3685 net: get mac address from environment and use eth util funcs
3687 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3688 CC: Ben Warren <biggerbadderben@gmail.com>
3690 commit 500b6c51e4c41f4562cb48344af98deb7e342731
3691 Author: Mike Frysinger <vapier@gentoo.org>
3692 Date: Mon Oct 13 15:06:25 2008 -0400
3694 Blackfin: bfin_mac: force boards to setup the MAC themselves
3696 Since the on-chip MAC does not have an eeprom or similar interface, force
3697 all Blackfin boards that use this driver to setup the board data with a
3700 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3701 CC: Ben Warren <biggerbadderben@gmail.com>
3703 commit 6ff4137f2ad640e4fc8ea1b0455161ddff1f6730
3704 Author: Mike Frysinger <vapier@gentoo.org>
3705 Date: Wed Feb 11 14:12:34 2009 -0500
3707 doc/README.enetaddr: document proper MAC usage
3709 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3710 CC: Ben Warren <biggerbadderben@gmail.com>
3712 commit 3f6e6993e92fd0658da1746d1c84644612ee520b
3713 Author: Mike Frysinger <vapier@gentoo.org>
3714 Date: Thu Jan 29 19:43:44 2009 -0500
3716 net: new utility functions for working with enetaddr's
3718 Declare new utility functions for converting between the environment
3719 variables (eth*addr) and the binary MAC address representation. This way
3720 we can unify all the random places that already do this kind of thing.
3722 The functions in question:
3723 eth_parse_enetaddr - "..." -> {...}
3724 eth_getenv_enetaddr - env -> {...}
3725 eth_setenv_enetaddr - {...} -> env
3727 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3728 CC: Ben Warren <biggerbadderben@gmail.com>
3730 commit b6446b67758ea1e41223f0782924bb73fd0a89d0
3731 Author: Mike Frysinger <vapier@gentoo.org>
3732 Date: Tue Feb 17 00:00:53 2009 -0500
3734 convert print_IPaddr() to %pI4
3736 Now that our printf functions support the %pI4 modifier like the kernel,
3737 let's drop the inflexible print_IPaddr() function and covert over to the
3740 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3741 CC: Ben Warren <biggerbadderben@gmail.com>
3743 commit 6c6166f52983dac775e3852f9d0f49d033f27108
3744 Author: Mike Frysinger <vapier@gentoo.org>
3745 Date: Mon Feb 16 23:21:36 2009 -0500
3747 vsprintf: pull updates from Linux kernel
3749 This brings in support for the %p modifier which allows us to easily print
3750 out things like ip addresses, mac addresses, and pointers.
3752 It also converts the rarely used 'q' length modifier to the common 'L'
3753 modifier when dealing with quad types.
3755 While this new code is a bit larger (~1k .text), most of it should be made
3756 up by converting the existing ip/mac address code to use format modifiers.
3758 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3760 commit a43ea5cc6d612471fbc74f0a26b2bea5864aa1d6
3761 Author: Jon Smirl <jonsmirl@gmail.com>
3762 Date: Thu Mar 19 23:04:18 2009 -0400
3764 .gitignore for generated files in api_examples directory
3766 Add .gitignore for generated files in api_examples directory
3768 Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
3769 Signed-off-by: Wolfgang Denk <wd@denx.de>
3771 commit 40281a9ca21a6b6d7b996b4d4eeaa19026337231
3772 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3773 Date: Wed Mar 18 12:27:04 2009 +0900
3775 net: sh_eth: Remove sh_eth_reset() from halt function
3777 sh_eth_reset is function to reset Ether IP.
3778 The MAC address is stored in IP, but it is initialized by this function.
3779 OS (e.g. Linux Kernel) can not use this device when initialized.
3780 This revises this problem.
3782 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3784 commit f8853d105da7d69bc92a5b4578f9b85234e558ec
3785 Author: Anatolij Gustschin <agust@denx.de>
3786 Date: Fri Mar 20 12:45:50 2009 +0100
3788 ppc4xx: Fix bug in PCI outbound map configuration for canyonlands
3790 PCI outbound address map configuration doesn't match the
3791 PCI memory address range covered by appropriate TLB entry
3792 configuration for canyonlands causing machine check
3793 exceptions while accessing PCI memory regions. This patch
3794 provides a fix for this issue.
3796 Kazuaki Ichinohe observed and reported this issue while
3797 testing display output with PCI ATI video card on canyonlands.
3799 Signed-off-by: Anatolij Gustschin <agust@denx.de>
3800 Signed-off-by: Stefan Roese <sr@denx.de>
3802 commit 7a88601a34132548c3c591ea87ab3468b51121b0
3803 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
3804 Date: Fri Mar 6 10:09:37 2009 -0500
3806 CFI: geometry reversal for STMicro M29W320DT
3808 Follow up to the flash_fixup_stm to fix geometry reversal
3809 on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region.
3811 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
3812 Signed-off-by: Stefan Roese <sr@denx.de>
3814 commit 069f4364d807d7fdea3de7385ad2f8d83c587aec
3815 Author: Mike Frysinger <vapier@gentoo.org>
3816 Date: Wed Feb 25 17:29:40 2009 -0500
3818 smc911x_eeprom: update register API
3820 The smc911x driver changed the naming convention for its register funcs,
3821 so update the eeprom code accordingly.
3823 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
3824 CC: Ben Warren <biggerbadderben@gmail.com>
3826 commit 6a397ef0e6c58caab8bf427d447714bc9b3bb9d4
3827 Author: Grzegorz Bernacki <gjb@semihalf.com>
3828 Date: Tue Mar 17 10:06:39 2009 +0100
3830 mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
3832 Total5200 and digsy MTC use I2C port 2 pins as a ATA chip select.
3833 To avoid adding board-specific ifdefs to cpu/mpc5xxx/ide.c new
3834 define CONFIG_SYS_ATA_CS_ON_I2C2 was introduced. It is used by
3835 Total5200 and will be used by digsy MTC and other boards with
3838 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
3840 commit 1b6275dfb173bd2edb8f208dd050d6f47ae39654
3841 Author: Heiko Schocher <hs@denx.de>
3842 Date: Thu Mar 12 07:37:34 2009 +0100
3844 8xx: add support for new keymile kmsupx4 board.
3846 This patch adds support for the kmsupx4 board from Keymile,
3847 based on a Freescale MPC852T CPU
3849 - serial console on SMC1
3852 - Ethernet over SCC3
3855 Signed-off-by: Heiko Schocher <hs@denx.de>
3857 commit d044954fe2a7e7a3dd104eb9c9d2104e38da2911
3858 Author: Heiko Schocher <hs@denx.de>
3859 Date: Thu Mar 12 07:37:28 2009 +0100
3861 8xx, mgsuvd: rename board to a more generic name
3863 renaming the "mgsuvd" board port into "km8xx", because
3864 there come more similar boards from keymile.
3865 Compiling the mgsuvd board with "make mgsuvd_config"
3868 Signed-off-by: Heiko Schocher <hs@denx.de>
3870 commit 18b2f35bde1672e074a3d5048383cb56fda745cb
3871 Author: Heiko Schocher <hs@denx.de>
3872 Date: Thu Mar 12 07:37:23 2009 +0100
3874 8xx, mgsuvd: Coding Style cleanup config file
3876 Signed-off-by: Heiko Schocher <hs@denx.de>
3878 commit 364123db6730d32330f818b65360d2cd27396667
3879 Author: Heiko Schocher <hs@denx.de>
3880 Date: Thu Mar 12 07:37:18 2009 +0100
3882 powerpc: common updates for keymile boards
3884 - added to keymile-common.h:
3887 - CONFIG_AUTO_COMPLETE
3888 - CONFIG_SYS_FLASH_PROTECTION
3890 - CONFIG_VERSION_VARIABLE
3891 - extracted common I2C settings for all boards
3892 - common default environment settings summarized
3894 Signed-off-by: Heiko Schocher <hs@denx.de>
3896 commit 506f391888b82d1b83bdd749c3cea9eb2fd64df8
3897 Author: Heiko Schocher <hs@denx.de>
3898 Date: Thu Mar 12 07:37:15 2009 +0100
3900 8xx, icache: enabling ICache not before running from RAM
3902 with the new CONFIG_SYS_DELAYED_ICACHE config option, ICache
3903 is not enabled before code runs from RAM.
3905 Signed-off-by: Heiko Schocher <hs@denx.de>
3907 commit cabf7b9c83bd780a5805ddbb4c0ce431d5b9f9f3
3908 Author: Heiko Schocher <hs@denx.de>
3909 Date: Thu Mar 12 07:37:11 2009 +0100
3911 82xx, mgcoge: fix environment sector size
3913 Size of one environment sector is 0x20000.
3915 Signed-off-by: Heiko Schocher <hs@denx.de>
3917 commit 27057d416c7cc9eb1860953da8836352c07f13e9
3918 Author: Ladislav Michl <ladis@linux-mips.org>
3919 Date: Mon Mar 16 23:27:31 2009 +0100
3921 NetStar: config reindentation
3923 Fix indentation broken by symbol renames. "Sort" driver related definitons.
3925 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
3927 commit 8d8235f84d3ef3f29b7d14e741369b5824b5bb4a
3928 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3929 Date: Tue Mar 17 11:21:43 2009 +0000
3931 ColdFire: Fix incorrect definition
3933 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3935 commit 9017d9325a5067b2ab0d70a2d3c907620c9ab7f8
3936 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3937 Date: Mon Mar 2 19:16:45 2009 +0000
3939 ColdFire: Fix M5329EVB and M5373EVB nand issue
3941 The Nand flash was unable to read and write properly
3942 due to Nand Chip Select (nCE) setup was in reverse
3943 order. Also, increase the Nand time out value to 60.
3945 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3947 commit 42b68af1062f75bb4a91cf47e329a7e8100cd815
3948 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3949 Date: Tue Jan 27 15:19:35 2009 +0000
3951 ColdFire: PLATFORM_CPPFLAGS updates for new compiler
3953 Update PLATFORM_CPPFLAGS to accept 4.3.x version of
3956 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3958 commit d6e4baf49987fc6f75e8574c0c27301a828b3132
3959 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3960 Date: Tue Jan 27 12:57:47 2009 +0000
3962 ColdFire: Provide gzip image size V2 & V3 platforms
3964 Default gzip bootm size is 8MB. Some platforms require
3967 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3969 commit c3a9e6374210679a81f611c1bcf968988bc20e41
3970 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3971 Date: Wed Feb 18 11:49:31 2009 +0000
3973 ColdFire: Fix M54451 serial boot dram setup
3975 The serial boot dram extended/standard mode register was not
3976 setup and was using default DRAM setup causing the U-boot was
3977 unstable to boot up in serial mode.
3979 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3981 commit 32d11d58159a575f08a982cad8a5a941ffe5cc3d
3982 Author: arun c <arun.edarath@gmail.com>
3983 Date: Thu Dec 4 15:57:15 2008 +0530
3985 Coldfire: XL Bus minor fixes
3987 According to coldfire manual data timeout > address time out
3988 also use correct macro to program XARB_CFG
3990 Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
3992 commit 65d8bc94d8214812ccdf3372d3fef845cf4ec2e5
3993 Author: Scott Wood <scottwood@freescale.com>
3994 Date: Tue Mar 17 12:06:04 2009 -0500
3996 NAND: Have nboot accept .e and .i as legacy no-ops.
3998 This was intended to happen before, but a trivial bug prevented it.
4000 Signed-off-by: Scott Wood <scottwood@freescale.com>
4002 commit 0987505540918b2464b73069af3a5b766dbd3ceb
4003 Author: Ladislav Michl <ladis@linux-mips.org>
4004 Date: Fri Mar 13 14:38:19 2009 +0100
4006 NAND: Make nboot skip bad blocks
4008 nboot command currently does not skip bad blocks and gives read error when
4009 loading image stored over bad block. With patch applied, nboot works as
4012 Device 0 bad blocks:
4019 Loading from NAND 128MiB 3,3V 8-bit, offset 0x2c00000
4020 Image Name: Linux-2.6.22-omap1
4021 Created: 2008-11-20 23:44:32 UTC
4022 Image Type: ARM Linux Kernel Image (uncompressed)
4023 Data Size: 1052520 Bytes = 1 MB
4024 Load Address: 10008000
4025 Entry Point: 10008000
4026 Skipping bad block 0x02cc0000
4027 Automatic boot of image at addr 0x10400000 ...
4030 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
4031 Signed-off-by: Scott Wood <scottwood@freescale.com>
4033 commit 0b2f38fe3c4555dd2b81c69880403c13ad723153
4034 Author: Stefan Roese <sr@denx.de>
4035 Date: Thu Mar 12 07:27:25 2009 +0100
4037 ppc4xx: lwmon5: Only use one CS (rank) in DDR2 configuration
4039 This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
4040 the DDR2 configuration to only use one CS (rank). As this code is most
4041 likely copied from the original Sequoia version, this error was copied
4044 This patch also removes some dead code.
4046 Signed-off-by: Stefan Roese <sr@denx.de>
4048 commit 9199b9cc8f56aca26504b48cf702176208f46e54
4049 Author: Stefan Roese <sr@denx.de>
4050 Date: Thu Mar 12 07:24:40 2009 +0100
4052 ppc4xx: PMC440: Only use one CS (rank) in DDR2 configuration
4054 This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
4055 the DDR2 configuration to only use one CS (rank). As this code is most
4056 likely copied from the original Sequoia version, this error was copied
4059 Signed-off-by: Stefan Roese <sr@denx.de>
4061 commit ee86fd15e1ccda4be41f1dba82b8c9efea9a3145
4062 Author: Mikhail Zolotaryov <lebon@lebon.org.ua>
4063 Date: Wed Mar 11 10:54:46 2009 +0200
4065 Fix AMCC Sequoia board DDR memory configuration
4067 Sequoia board schematics (DES0211_11_SCH_11.pdf, page 5, unit U1D)
4068 specifies that BankSel#1 is not connected, while bootloader memory
4069 configuration is (board/amcc/sequoia/sdram.c):
4070 mtsdram(DDR0_10, 0x00000300);
4071 i.e. both Chip Selects used - not correct.
4073 If we change to correct value here:
4074 mtsdram(DDR0_10, 0x00000100);
4075 memory is accessible OK also.
4077 Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
4078 Signed-off-by: Stefan Roese <sr@denx.de>
4080 commit b3dd629e78870ba2dc9f8032978721c0fa02a856
4081 Author: Wolfgang Denk <wd@denx.de>
4082 Date: Sun Mar 15 22:40:09 2009 +0100
4086 Update CHANEGLOG, fix minor coding style issue.
4088 Signed-off-by: Wolfgang Denk <wd@denx.de>
4090 commit 394d30dd1ee23b80fd5e59e17ebe0feca927ab31
4091 Author: Jerry Van Baren <gvb.uboot@gmail.com>
4092 Date: Fri Mar 13 11:40:10 2009 -0400
4094 mpc83xx: Add bank configuration to FSL spd_sdram.c
4096 The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8
4099 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4100 Acked-by: Dave Liu <daveliu@freescale.com>
4101 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4103 commit b581626c1e2474a3dadf69d4f0e0582eccbc4235
4104 Author: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
4105 Date: Fri Mar 13 08:58:14 2009 +0100
4107 mpc83xx: correctly set encryption and I2C bus 0 clock
4109 This patch makes sure the correct mask is applied when setting
4110 the encryption and I2C bus 0 clock in SCCR.
4111 Failing to do so may lead to ENCCM being 0 in which case I2C bus 0
4114 Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
4115 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4117 commit e6a6a704151c2d7e4a7b485545b48a6020ccca17
4118 Author: Dirk Behme <dirk.behme@googlemail.com>
4119 Date: Thu Mar 12 19:30:50 2009 +0100
4121 OMAP3: Add support for OMAP3 die ID
4123 Read and store OMAP3 die ID in U-Boot environment.
4125 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4127 commit f949bd8d089ec3059c460ac829c0d919e1d7af0e
4128 Author: Jon Smirl <jonsmirl@gmail.com>
4129 Date: Wed Mar 11 15:08:56 2009 -0400
4131 MPC5200 FEC MII speed register
4133 Set a non-zero speed in the MII register so that MII commands will work.
4135 Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
4137 commit 94a353611b93ac4cb4434a5f7e98aa0902da919e
4138 Author: Yusuke.Goda <goda.yusuke@renesas.com>
4139 Date: Fri Mar 13 16:08:18 2009 +0900
4141 sh: ap325rxa: Change the wait cycle in the area 5
4143 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
4144 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4146 commit 2db0e1278b9f11263e0a13326b57d4f99781f7ac
4147 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4148 Date: Wed Feb 25 16:04:26 2009 +0900
4150 sh: Fix cannot work rtl8139 on r2dplus
4152 The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory
4155 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4156 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4158 commit 64f3c0b8ba99d6651db59273e497ab5e857c8d4f
4159 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4160 Date: Fri Feb 27 18:35:41 2009 +0900
4162 sh: Add netdev header fixing of warning/build
4164 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4165 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4167 commit ada9318252f51c2626e9837c623f9812b0308dea
4168 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4169 Date: Tue Mar 3 15:11:17 2009 +0900
4171 sh: Add support 32-Bit Extended Address Mode to sh7785lcr
4173 We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
4174 for this mode. This command changes PMB for using 512MB system memory.
4176 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4177 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4179 commit 06b18163b57e6b0349b0c299222d50e7b1e41e50
4180 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4181 Date: Wed Feb 25 14:26:42 2009 +0900
4183 sh: Add some register value configurable to PCI of SH7780
4185 Some register value was hardcoded for System memory size 128MB and
4186 memory offset 0x08000000. This patch fixed the problem.
4188 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4189 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4191 commit 06e2735eb85cbea7cecb3c308d6d078b3651b22c
4192 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4193 Date: Wed Feb 25 14:26:52 2009 +0900
4195 sh: Add system memory registration to PCI for SH4
4197 It is necessary for some pci device driver.
4199 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4200 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4202 commit b3061b40db691245a7bb9a55354b4edacbf3902d
4203 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4204 Date: Wed Feb 25 14:26:55 2009 +0900
4206 sh: Add value for PCI system memory registration of sh7785lcr
4208 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4209 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4211 commit 6d84ae3956a6cd7aebd86f661130752594e60124
4212 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4213 Date: Tue Mar 3 15:11:08 2009 +0900
4215 sh: Add macros for SH-4A 32-Bit Address Extended Mode
4217 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
4218 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4220 commit 3e3eec39de8fe0ae62e6e4d4e3fa4442ee9ed6b1
4221 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4222 Date: Tue Feb 3 13:35:05 2009 +0900
4224 sh: use write{8,16,32} in ms7720se lowlevel_init
4226 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
4227 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
4229 commit 0452352df118bc9dd684a056aaaa5fb4aed1178a
4230 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
4231 Date: Mon Mar 9 18:07:53 2009 -0500
4233 tsec: report when there is no vendor specific PHY support
4235 Commit af1c2b84 added a generic phy support, with an ID of zero
4236 and a 32 bit mask; meaning that it will match on any PHY ID.
4238 The problem is that there is a test that checked if a matching
4239 PHY was found, and if not, it printed the non-matching ID.
4240 But since there will always be a match (on the generic PHY,
4241 worst case), this test will never trip.
4243 In the case of a misconfigured PHY address, or of a PHY that
4244 isn't explicitly supported outside of the generic support,
4245 you will never see the ID of 0xffffffff, or the ID of the
4246 real (but unsupported) chip. It will silently fall through
4247 onto the generic support.
4249 This change makes that test useful again, and ensures that
4250 the selection of generic PHY support doesn't happen without
4251 some sort of notice. It also makes it explicitly clear that
4252 the generic PHY must be last in the PHY table.
4254 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
4255 Acked-by: Andy Fleming <afleming@freescale.com>
4257 commit c279dfc10186ceba78d3862036f158750e86599a
4258 Author: Wolfgang Denk <wd@denx.de>
4259 Date: Mon Mar 9 10:53:05 2009 +0100
4261 SIMPC8313 board: fix out of tree building.
4263 Fix typo in makefile which broke out of tree builds.
4265 Also use expolicit "rm" instead of "ln -sf" which is known to be
4268 Signed-off-by: Wolfgang Denk <wd@denx.de>
4269 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4271 commit 49b5aff491bd574935ecaf8545152066a25eff3d
4272 Author: ksi@koi8.net <ksi@koi8.net>
4273 Date: Mon Feb 23 10:53:13 2009 -0800
4275 Add eTSEC 1/2 IO override control (corrected)
4277 This adds tsec12ioovcr to include/asm-ppc/immap_85xx.h (was reserved.)
4279 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
4281 commit 48c2b7bb432da84fcce05b4db6efad0be73a93dc
4282 Author: Andy Fleming <afleming@freescale.com>
4283 Date: Fri Mar 6 19:05:52 2009 -0600
4285 fsl: Remove unnecessary debug printfs
4287 These were left in accidentally, and are not really useful unless the
4288 code is as broken as it was when it was being developed.
4290 Signed-off-by: Andy Fleming <afleming@freescale.com>
4292 commit 0ee84b88b78bce425190d8cd7adf4c30cba0c2f0
4293 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
4294 Date: Tue Feb 24 02:37:59 2009 -0600
4296 Fix mpc85xx ddr-gen3 ddr_sdram_cfg.
4298 Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other
4299 sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set.
4301 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4303 commit a922fdb87af25c25c032424908dcf60fbf3250ea
4304 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4305 Date: Tue Feb 24 06:13:10 2009 +0100
4307 PXA: timer use do_div and simplify it
4309 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4311 commit 4b00d1aa82b6af9b4e628a5729a12086e44558b3
4312 Author: Wolfgang Denk <wd@denx.de>
4313 Date: Mon Mar 9 10:51:39 2009 +0100
4315 SIMPC8313 board: fix out of tree building.
4317 Fix typo in makefile which broke out of tree builds.
4319 Also use expolicit "rm" instead of "ln -sf" which is known to be
4322 Signed-off-by: Wolfgang Denk <wd@denx.de>
4324 commit f70fd13e2fe4cf58e251271c27f9c06e141d7f9a
4325 Author: Heiko Schocher <hs@denx.de>
4326 Date: Tue Feb 24 11:30:51 2009 +0100
4328 8360, kmeter1: added bootcount feature.
4330 add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU.
4332 The bootcounter uses 8 bytes from the muram,
4333 because no other memory was found on this
4334 CPU for the bootcount feature. So we must
4335 correct the muram size in DTS before booting
4338 This feature is actual only implemented for
4339 MPC8360, because not all 83xx CPU have qe,
4340 and therefore no muram, which this feature
4343 Signed-off-by: Heiko Schocher <hs@denx.de>
4344 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4346 commit 1e7ed2565031e01abc18c713030a0a9829c07684
4347 Author: Heiko Schocher <hs@denx.de>
4348 Date: Tue Feb 24 11:30:48 2009 +0100
4350 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
4352 old code implemented the QE_ENET10 errata only for Silicon
4353 Revision 2.0. New code reads now the Silicon Revision
4354 register and sets dependend on the Silicon Revision the
4355 values as advised in the QE_ENET10 errata.
4357 Signed-off-by: Heiko Schocher <hs@denx.de>
4358 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4360 commit 605f78e34a3f0103693b891f2573edd352e7d495
4361 Author: Heiko Schocher <hs@denx.de>
4362 Date: Tue Feb 24 11:30:44 2009 +0100
4364 83xx, kmeter1: updates for 2009.03
4367 HRCWH_BOOTSEQ_DISABLE not HRCWH_BOOTSEQ_NORMAL
4368 HRCWH_LALE_EARLY added
4369 - DDR-SDRAM settings modified. This solves sporadically
4370 problems with this memory.
4371 - CS1 now 128 MB window size
4372 - CS3 now 512 MB window size
4374 - MTDPARTS_DEFAULT defined
4375 - CONFIG_HOSTNAME added
4376 - MONITOR_LEN now 384 KB
4378 Signed-off-by: Heiko Schocher <hs@denx.de>
4379 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4381 commit 118cbe3c35c898f8d020b29d6dc180307cacf147
4382 Author: Heiko Schocher <hs@denx.de>
4383 Date: Tue Feb 24 11:30:40 2009 +0100
4385 83xx, kmeter1: autodetect size of DDR II RAM
4387 it is possible that some board variants have different DDR II
4388 RAM sizes. So we autodetect the size of the assembled RAM.
4390 Signed-off-by: Heiko Schocher <hs@denx.de>
4391 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4393 commit c1bce4fff750d734b1fa7467eb08f93902c97ca6
4394 Author: Heiko Schocher <hs@denx.de>
4395 Date: Tue Feb 24 11:30:37 2009 +0100
4397 83xx, i2c: add mux support for fsl_i2c
4399 This patch adds I2C mux support for the fsl_i2c driver. This
4400 allows you to add "new" i2c busses, which are reached over
4401 i2c muxes. For more infos, please look in the README and
4402 search for CONFIG_I2C_MUX.
4404 Signed-off-by: Heiko Schocher <hs@denx.de>
4405 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4407 commit 19f0e93041dbfe22f8d39b98e4f7f9ea87b77803
4408 Author: Heiko Schocher <hs@denx.de>
4409 Date: Tue Feb 24 11:30:34 2009 +0100
4411 83xx, kmeter1: add I2C, dtt, eeprom support
4413 This patch adds I2C support for the Keymile kmeter1 board.
4414 It uses the First I2C Controller from the CPU, for
4415 accessing 4 temperature sensors, an eeprom with IVM data
4416 and the booteeprom over a pca9547 mux.
4418 Signed-off-by: Heiko Schocher <hs@denx.de>
4419 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4421 commit db1d72afd77287bc8577210f3f71ab249dcf146f
4422 Author: Heiko Schocher <hs@denx.de>
4423 Date: Tue Feb 24 11:30:30 2009 +0100
4425 i2c, dtt: move dtt_init () to board_init_r ()
4427 In case where a board not uses CONFIG_POST, it is not
4428 necessary to init the DTTs when running from flash.
4430 Signed-off-by: Heiko Schocher <hs@denx.de>
4431 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4433 commit 5b0055547f0246908b79cc300170d87380b69e18
4434 Author: Dave Liu <daveliu@freescale.com>
4435 Date: Wed Feb 25 12:31:32 2009 +0800
4437 83xx: Fix some bugs in spd sdram code
4439 1. RD_TO_PRE missed to add the AL, and need min 2 clocks for
4440 tRTP according to DDR2 JEDEC spec.
4441 2. WRTORD - tWTR need min 2 clocks according to DDR2 JEDEC spec.
4442 3. add the support of DDR2-533,667,800 DIMMs
4444 5. make the AL to min to gain better performance.
4446 The Micron MT9HTF6472CHY-667D1 DIMMs test passed on
4447 MPC837xEMDS platform at 266MHz/333MHz/400MHz data rate.
4450 Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
4452 Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
4453 Signed-off-by: Dave Liu <daveliu@freescale.com>
4454 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4456 commit b7be63abec45858c044f0fbd6aeef524c4663f9b
4457 Author: Valeriy Glushkov <gvv@lstec.com>
4458 Date: Wed Feb 4 18:27:49 2009 +0200
4460 MPC8349ITX: several config issues fixed
4462 The previous version rebooted forever with DDR bigger than 256MB.
4463 Access the DS1339 RTC chip is on I2C1 bus.
4466 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
4467 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4469 commit 7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af
4470 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4471 Date: Thu Feb 19 18:20:39 2009 +0300
4473 mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
4475 The SerDes initialization should be finished before negating the reset
4476 signal according to the reference manual. This isn't an issue on real
4477 hardware, but we'd better stick to the specifications anyway.
4479 Suggested-by: Liu Dave <DaveLiu@freescale.com>
4480 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4481 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4483 commit 9c2d63ec0e9520948b6d598ea32e9aa4e0de847f
4484 Author: Heiko Schocher <hs@denx.de>
4485 Date: Wed Feb 25 12:28:32 2009 +0100
4487 i2c, dtt: move dtt_init () to board_init_r ()
4489 it is not necessary to init the DTTs so early,
4490 so move this init to board_init_r ().
4492 Signed-off-by: Heiko Schocher <hs@denx.de>
4494 commit 00cc5595a7caac8066b408774383a956c2e26797
4495 Author: Anatolij Gustschin <agust@denx.de>
4496 Date: Wed Feb 25 20:28:13 2009 +0100
4498 lcd: Fix compilation warning in common/lcd.c
4500 Fix following warning while compilation for mcc200 board:
4502 lcd.c: In function 'lcd_display_bitmap':
4503 lcd.c:625: warning: unused variable 'cmap'
4505 Signed-off-by: Anatolij Gustschin <agust@denx.de>
4507 commit f5a77a09c93fe7f04c0c56f64ea436f7d318d674
4508 Author: Graeme Russ <graeme.russ@gmail.com>
4509 Date: Tue Feb 24 21:11:24 2009 +1100
4511 Moved SC520 Files (fix commit 407976185e0dda2c90e89027121a1071b9c77bfb)
4513 Fixes commit 407976185e0dda2c90e89027121a1071b9c77bfb
4515 Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
4517 commit 75ba6d693b8f6247aa4b81323a2ee2fa28222215
4518 Author: Mike Frysinger <vapier@gentoo.org>
4519 Date: Mon Feb 23 10:29:47 2009 -0500
4521 smc911x: split out useful defines/functions into local header
4523 The smc911x driver has a lot of useful defines/functions which can be used
4524 by pieces of code (such as example eeprom programmers). Rather than
4525 forcing each place to duplicate these defines/functions, split them out
4526 of the smdc911x driver into a local header.
4528 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4529 Acked-by: Ben Warren <biggerbadderben@gmail.com>
4530 CC: Sascha Hauer <s.hauer@pengutronix.de>
4531 CC: Guennadi Liakhovetski <lg@denx.de>
4532 CC: Magnus Lilja <lilja.magnus@gmail.com>
4533 CC: Ben Warren <biggerbadderben@gmail.com>
4535 commit a2bb7105a79af8f2ffa9f87256fce6c1cbcbd8e1
4536 Author: Guennadi Liakhovetski <lg@denx.de>
4537 Date: Tue Feb 24 10:44:02 2009 +0100
4539 ARM: add an "eet" variant of the imx31_phycore board
4541 The "eet" variant of the imx31_phycore board has an OLED display, using a
4542 s6e63d6 display controller on the first SPI interface, using GPIO57 as a
4543 chip-select for it. With this configuration you can display 256 colour BMP
4544 images in 16-bit RGB (RGB565) LCD mode.
4546 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4547 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4549 commit 0c99f6ab31c5635874ba7a2e8d37791bfbf02f8f
4550 Author: Guennadi Liakhovetski <lg@denx.de>
4551 Date: Fri Feb 6 10:37:57 2009 +0100
4553 video: add an i.MX31 framebuffer driver
4555 Add a driver for the Synchronous Display Controller and the Display
4556 Interface on i.MX31, using IPU for DMA channel setup. So far only
4557 displaying of bitmaps is supported, no text output.
4559 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4560 Acked-by: Anatolij Gustschin <agust@denx.de>
4562 commit b245e65ee3c4cce3ccf008a21f4528239655876c
4563 Author: Guennadi Liakhovetski <lg@denx.de>
4564 Date: Fri Feb 6 10:37:53 2009 +0100
4566 LCD: support 8bpp BMPs on 16bpp displays
4568 This patch also simplifies some ifdefs in lcd.c, introduces a generic
4569 vidinfo_t, which new drivers are encouraged to use and old drivers to switch
4572 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4573 Acked-by: Anatolij Gustschin <agust@denx.de>
4575 commit a303dfb0e9a93e516ea9427b5c09543d5f74ade1
4576 Author: Mark Jackson <mpfj@mimc.co.uk>
4577 Date: Fri Feb 6 10:37:49 2009 +0100
4579 Add 16bpp BMP support
4581 This patch adds 16bpp BMP support to the common lcd code.
4583 Use CONFIG_BMP_16BPP and set LCD_BPP to LCD_COLOR16 to enable the code.
4585 At the moment it's only been tested on the MIMC200 AVR32 board, but extending
4586 this to other platforms should be a simple task !!
4588 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
4589 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4590 Acked-by: Anatolij Gustschin <agust@denx.de>
4592 commit 689551c5ff1b394b88412f3df22144e79468d3a9
4593 Author: Guennadi Liakhovetski <lg@denx.de>
4594 Date: Fri Feb 6 10:37:41 2009 +0100
4596 A driver for the S6E63D6 SPI display controller from Samsung
4598 This is a driver for the S6E63D6 SPI OLED display controller from Samsung.
4599 It only provides access to controller's registers so the client can freely
4602 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4603 Acked-by: Anatolij Gustschin <agust@denx.de>
4605 commit fc7a93c84f3f134484811a0d9ad751fbc1a7da6d
4606 Author: Guennadi Liakhovetski <lg@denx.de>
4607 Date: Fri Feb 13 09:26:40 2009 +0100
4609 i.MX31: support GPIO as a chip-select in the mxc_spi driver
4611 Some SPI devices have special requirements on chip-select handling.
4612 With this patch we can use a GPIO as a chip-select and strictly follow
4613 the SPI_XFER_BEGIN and SPI_XFER_END flags.
4615 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4616 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4618 commit b30de3cccf8867566cd314e7c7033904afa5dc9d
4619 Author: Guennadi Liakhovetski <lg@denx.de>
4620 Date: Sat Feb 7 01:18:07 2009 +0100
4622 i.MX31: add a simple gpio driver
4624 This is a minimal driver, so far only managing output. It will
4625 be used by the mxc_spi.c driver.
4627 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4628 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4630 commit f9b6a1575d9f1ca192e4cb60e547aa66f08baa3f
4631 Author: Guennadi Liakhovetski <lg@denx.de>
4632 Date: Sat Feb 7 00:09:12 2009 +0100
4634 i.MX31: fix SPI driver for shorter than 32 bit
4636 Fix setting the SPI Control register, 8 and 16-bit transfers
4637 and a wrong pointer in the free routine in the mxc_spi driver.
4639 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4640 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4642 commit 7e91558032a0c1932dd7f4f562f9c7cc55efc496
4643 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4644 Date: Thu Feb 19 18:20:52 2009 +0300
4646 mpc83xx: MPC837XERDB: Add PCIe support
4648 On MPC8377E-RDB and MPC8378E-RDB boards we have PCIe and mini-PCIe
4649 slots. Let's support them.
4651 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4652 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4654 commit 50a4d08e8f31debbd4ea12caf1265f3643c38d5b
4655 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4656 Date: Thu Feb 19 18:20:50 2009 +0300
4658 mpc83xx: PCI: Fix hard-coded first_busno value
4660 We should use pci_last_busno() in pci_init_bus(), otherwise we'll
4661 erroneously re-use PCI0's first_busno for PCI1 hoses.
4663 NOTE: The patch is untested. All MPC83xx FSL boards I have have
4664 PCI1 in miniPCI form, for which I don't have any cards handy.
4666 But looking in cpu/mpc85xx/pci.c:
4668 #ifdef CONFIG_MPC85XX_PCI2
4669 hose = &pci_hose[1];
4671 hose->first_busno = pci_hose[0].last_busno + 1;
4673 And considering that we do the same for MPC83xx PCI-E support,
4674 I think this patch is correct.
4676 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4677 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4679 commit a5878d427128c1a9226045ebe05fbadaa02eb9dd
4680 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4681 Date: Thu Feb 19 18:20:46 2009 +0300
4683 mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
4685 This patch fixes copy-paste issue: pci_hose[0]'s first and last
4686 busnos were used to fixup pci1's nodes.
4688 We don't see this bug triggering only because Linux reenumerate
4691 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4692 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4694 commit b24a99f6666ac278ec9f9c1334518af828833d19
4695 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4696 Date: Thu Feb 19 18:20:44 2009 +0300
4698 mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
4700 This patch fixes an issue in config space read accessors: we should
4701 fill-in the value even if we fail (e.g. skipping devices), otherwise
4702 CONFIG_PCI_SCAN_SHOW reports bogus values during boot up.
4704 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4705 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4707 commit e2d72ba543c7b6924b5b5d393dcd80b2b9c3a022
4708 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4709 Date: Thu Feb 19 18:20:42 2009 +0300
4711 mpc83xx: PCIe: Don't start bus enumeration at 0
4713 Currently we assign first_busno = 0 for the first PCIe hose, but this
4714 scheme won't work if we have ordinary PCI hose already registered (its
4715 first_busno value is 0 too).
4717 The old code worked fine only because we have PCI disabled on
4718 MPC837XEMDS boards in stand-alone mode (see commit 00f7bbae92e3b13f2b3
4719 "mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards").
4720 But on MPC837XERDB boards we have PCI and PCIe, so the bug actually
4723 So, to fix the issue, we should use pci_last_busno() + 1 for the
4724 first_busno (i.e. last available busno).
4726 Reported-by: Huang Changming <Chang-Ming.Huang@freescale.com>
4727 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4728 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4730 commit cc2a8c7751ddbae3116660064f446888538b93e9
4731 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
4732 Date: Thu Feb 19 18:20:41 2009 +0300
4734 PCI: Add pci_last_busno() helper
4736 This is just a handy routine that reports last PCI busno: we walk
4737 down all the hoses and return last hose's last_busno.
4739 Will be used by PCI/PCIe initialization code.
4741 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
4742 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4744 commit bd76729bcbfd64b5d016a9b936f058931fc06eaf
4745 Author: Becky Bruce <beckyb@kernel.crashing.org>
4746 Date: Mon Feb 23 13:56:51 2009 -0600
4748 MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
4750 Currently, we get 256MB as the default, but since all the 86xx
4751 board configs define a 2G BAT mapping for RAM, raise default
4754 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
4755 Acked-by: Jon Loeliger <jdl@freescale.com>
4757 commit 2331e18b9df0ab98ebf3ab44c0efea1311949aaa
4758 Author: Becky Bruce <beckyb@kernel.crashing.org>
4759 Date: Thu Feb 12 10:43:32 2009 -0600
4761 mpc8641hpcn: Indicate 36-bit addr map in boot messages
4763 If 36-bit addressing is enabled, print a message on the console
4766 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
4768 commit 58a518c3d8a2c7de11d414e8b903495daee7dc7e
4769 Author: Mark Jackson <mpfj-list@mimc.co.uk>
4770 Date: Fri Feb 13 15:48:18 2009 +0000
4772 Setup extra MIMC200 chip selects
4774 Added code to setup the extra Flash and FRAM chip selects as used on the
4777 V2 moves the init code from the common "cpu.c" file into the board specific
4780 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
4781 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4783 commit 80534886a72a0088eef9e781a8e0b7d04ea41f36
4784 Author: Mark Jackson <mpfj@mimc.co.uk>
4785 Date: Mon Nov 24 12:10:56 2008 +0000
4787 MIMC200: tidy GCLK init code
4789 Change the MIMC200 startup code to use the built-in (rather than
4790 hard-coded) funtions for setting up gclk outputs.
4792 We'll also move the code to the new, more-appropriate
4793 board_postclk_init() routine.
4795 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
4796 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4798 commit b423f94063bf04e92047ff85c7e53441eb3b712b
4799 Author: Olav Morken <olavmrk@gmail.com>
4800 Date: Fri Jan 23 12:56:32 2009 +0100
4802 AVR32: Must add NOPs after disabling interrupts for AT32UC3A0512ES
4804 The AT32UC3A0512ES chip has a bug when disabling interrupts. As a
4805 workaround, two NOPs can be inserted.
4807 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
4808 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
4809 Signed-off-by: Olav Morken <olavmrk@gmail.com>
4810 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4812 commit f5f652fa91aa69db8117d211af1b4fe09f2edd3b
4813 Author: Gunnar Rangoy <gunnar@rangoy.com>
4814 Date: Fri Jan 23 12:56:29 2009 +0100
4816 AVR32: Make GPIO implmentation cpu dependent
4818 There are some differences in the implementation of GPIO in the
4819 at32uc chip compared to the ap700x series.
4821 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
4822 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
4823 Signed-off-by: Olav Morken <olavmrk@gmail.com>
4824 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4826 commit a38de083d2979db3680f0d0978c509a172c8fa00
4827 Author: Olav Morken <olavmrk@gmail.com>
4828 Date: Fri Jan 23 12:56:28 2009 +0100
4830 AVR32: Move addrspace.h to arch-directory, and move some functions from io.h to addrspace.h
4832 The AVR32A architecture (which AT32UC3A-series is based on) has a
4833 different memory layout than the AVR32B-architecture. This patch moves
4834 addrspace.h to an arch-dependent directory in preparation for
4835 AT32UC3A-support. It also moves some address-space manipulation
4836 functions from io.h to addrspace.h.
4838 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
4839 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
4840 Signed-off-by: Olav Morken <olavmrk@gmail.com>
4841 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4843 commit d8f2aa3298610b44127dbc4796d8038aa5847e0b
4844 Author: Olav Morken <olavmrk@gmail.com>
4845 Date: Fri Jan 23 12:56:27 2009 +0100
4847 AVR32: Make cacheflush cpu-dependent
4849 The AT32UC3A series of processors doesn't contain any cache, and issuing
4850 cache control instructions on those will cause an exception. This commit
4851 makes cacheflush.h arch-dependent in preparation for the AT32UC3A-support.
4853 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
4854 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
4855 Signed-off-by: Olav Morken <olavmrk@gmail.com>
4856 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4858 commit 2f70c49e5b9813635ad73666aa30f304c7fdeda9
4859 Author: Heiko Schocher <hs@denx.de>
4860 Date: Tue Feb 10 09:38:52 2009 +0100
4862 netloop: speed up NetLoop
4864 NetLoop polls every cycle with getenv some environment variables.
4865 This is horribly slow, especially when the environment is big.
4867 This patch reads only the environment variables in NetLoop,
4868 when they were changed.
4870 Also moved the init part of the NetLoop function in a seperate
4873 Signed-off-by: Heiko Schocher <hs@denx.de>
4874 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4876 commit ad2d16393e9f684e4a9255f42e8bfdd819b67a87
4877 Author: Mike Frysinger <vapier@gentoo.org>
4878 Date: Mon Dec 22 02:56:07 2008 -0500
4880 smc911x_eeprom: new example app for managing newer SMC parts
4882 A forward port of the last version to work with the newer smc911x driver.
4883 I only have a board with a LAN9218 part on it, so that is the only one
4884 I've tested. But there isn't anything in this that would make it terribly
4885 chip specific afaik.
4887 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
4888 CC: Sascha Hauer <s.hauer@pengutronix.de>
4889 CC: Guennadi Liakhovetski <lg@denx.de>
4890 CC: Magnus Lilja <lilja.magnus@gmail.com>
4891 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4893 commit 736323a490b664ec0edc3ddb2c1c4a6824db45c6
4894 Author: Pieter Henning <phenning@vastech.co.za>
4895 Date: Sun Feb 22 23:17:15 2009 -0800
4897 Added Vitesse VSC8211 definitions to TSEC driver
4899 Added the struct containing PHY settings for the Vitesse VSC8211 phy to
4900 the phy_info list in tsec.c
4902 Signed-off-by: Pieter Henning <phenning@vastech.co.za>
4903 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4905 commit 32688e572ff96715b41420e9a7f280db6c399b65
4906 Author: Wolfgang Denk <wd@denx.de>
4907 Date: Mon Feb 23 00:22:21 2009 +0100
4909 Update CHANGELOG; Prepare 2009.03-rc1
4911 Signed-off-by: Wolfgang Denk <wd@denx.de>
4913 commit 80b827c2b78329c6503b271e43d9eb693d644710
4914 Author: Wolfgang Denk <wd@denx.de>
4915 Date: Sun Feb 22 23:45:40 2009 +0100
4917 ARM: synchronize mach-types.h with linux v2.6.29-rc5-315-g683fdc5
4919 The file was generated from building versatile_defconfig.
4921 Signed-off-by: Wolfgang Denk <wd@denx.de>
4923 commit 14209ac13ff631e36c9a9dd426c59c2e2f5dab00
4924 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4925 Date: Sun Feb 22 14:24:11 2009 +0900
4927 MIPS: Fix GCC-4.2 'discards qualifiers from pointer target type' warnings
4929 Compiling dbau1x00 and gth2 boards with GCC-4.2, you would see new warnings
4932 skuribay@ubuntu:u-boot.git$ ./MAKEALL dbau1000
4933 Configuring for dbau1x00 board...
4934 au1x00_eth.c: In function 'au1x00_send':
4935 au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
4936 au1x00_eth.c: In function 'au1x00_recv':
4937 au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
4938 au1x00_eth.c: In function 'au1x00_init':
4939 au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
4940 au1x00_eth.c: In function 'au1x00_recv':
4941 au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
4942 au1x00_eth.c: In function 'au1x00_init':
4943 au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
4944 au1x00_eth.c: In function 'au1x00_send':
4945 au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
4947 We're passing a volatile pointer to a function which is expecting a non-
4948 volatile pointer. That's potentially dangerous, so gcc warns about it.
4949 Confirmed with ELDK 4.2 (GCC 4.2.2) and Sourcey G++ 4.2 (GCC 4.2.3).
4951 To fix this, we add a volatile attribute to the argument in question.
4952 The virt_to_phys function in Linux kernel also does the same thing.
4954 Signed-off-by: Stefan Roese <sr@denx.de>
4955 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
4957 commit aba45c85b22f8c57fc2fedba8e948e06c2e2f5b3
4958 Author: Dirk Behme <dirk.behme@googlemail.com>
4959 Date: Fri Feb 20 17:51:28 2009 +0100
4961 OMAP3: Clean up MMC code
4963 Clean up OMAP3 MMC code:
4965 * Convert register access to struct & readx/writex style
4966 * Replace hardcode values by macros
4967 * Remove macro defined twice
4969 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4971 commit cfcdf4a9b361d015c0debac73fbf7c511df4a934
4972 Author: Dirk Behme <dirk.behme@googlemail.com>
4973 Date: Thu Feb 12 18:55:43 2009 +0100
4975 OMAP3: Pandora: Update pin mux
4977 Clock pin must have input enabled for MMC3 to work.
4978 Also enable pull-ups for cmd/data lines to be consistent
4979 with remaining MMC host pin setup.
4981 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
4983 commit 6530a8bf8a0274b9419141e4c2c5a235cce5380f
4984 Author: Dirk Behme <dirk.behme@googlemail.com>
4985 Date: Thu Feb 12 18:55:42 2009 +0100
4987 OMAP3: Add OMAP3 auto detection
4989 This patch adds OMAP3 cpu type auto detection based on OMAP3 register
4990 and removes hardcoded values.
4992 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
4993 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
4995 commit f956fd0338f4990793a10f767929ba4963665261
4996 Author: Dirk Behme <dirk.behme@googlemail.com>
4997 Date: Thu Feb 12 18:55:41 2009 +0100
4999 OMAP3: Beagle: Add board revision detection
5001 With BeagleBoard revision C some HW changes are introduced (e.g. PinMUX)
5002 which might need different software handling. For this, GPIO pin 171 (GPIO
5003 module 6, offset 11) can be used to check for board revision. If this pin
5004 is low, we have a rev C board. Else it must be a revision Ax or Bx board.
5006 To handle board differences you can call function beagle_get_revision().
5009 if (beagle_get_revision()) {
5011 /* do special revision C stuff here */
5015 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
5017 commit 288f3cd912918b97919d13b6f7fb13fbddf74d68
5018 Author: Dirk Behme <dirk.behme@googlemail.com>
5019 Date: Thu Feb 12 18:55:40 2009 +0100
5021 OMAP3: Overo: Clean up pin mux and GPIO configuration
5023 * Make Overo GPIO114 an input for touchscreen PENDOWN
5024 * Make Overo GPIO144-147 readable
5025 * Make Overo EHCI pinmux match beagle rev c setup
5026 * Adjust pinmux for SMSC911X network chip support
5027 * Remove unnecessary GPIO setup
5028 * Fix merge error in Makefile
5030 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
5031 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
5033 commit 2579019b8248e5f166e60e37065766efc8a49dbc
5034 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5035 Date: Sun Feb 22 17:08:41 2009 +0100
5037 nmdk8815: fix onenand support
5039 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5041 commit 0176c03a2469676df5bf19cf93a1a6f582f6a120
5042 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5043 Date: Sun Feb 22 17:56:50 2009 +0100
5045 nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type
5047 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5049 commit 9751a456f702ba2fcdfd1bdbc0138927ef007858
5050 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5051 Date: Sun Feb 22 17:49:43 2009 +0100
5053 davinci: fix implicit declaration of function 'davinci_errata_workarounds'
5055 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5057 commit 4f5728987f4f9f7845688482aa2b7f2127768165
5058 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5059 Date: Sun Feb 22 15:49:28 2009 +0100
5061 arm: add uart dcc support
5063 Serial driver via the EmbeddedICE macrocell's DCC channel using
5066 It does include a timeout to ensure that the system does not
5067 totally freeze when there is nothing connected to read.
5069 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5071 commit 0cd18fa982f9a8c1a90ce971379a7d6408976d48
5072 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
5073 Date: Fri Nov 21 14:35:56 2008 -0500
5075 ARM DaVinci: Add common peripherals and modules enable functions.
5077 Taken all the duplicated code for enabling common modules and apply
5078 software workarounds from the board specific code into common
5079 functions. Also added comments explaining the workarounds
5080 (from TI errata documents) and replaced some numerical bit numbers
5081 with more meaningful defines.
5083 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
5085 commit d3be1bcae7a8207e0a79ffd035d0e90f80378295
5086 Author: Alessandro Rubini <rubini@unipv.it>
5087 Date: Mon Feb 9 15:53:33 2009 +0100
5089 Enable Ethernet for Nomadik 8815 Evaluation Kit
5091 This trivially enables Ethernet support in the debug board
5092 by setting up the proper chip select.
5094 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
5095 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
5097 commit 0d8c6eab2481046e9446264bfe9402bb98ddf433
5098 Author: Alessandro Rubini <rubini@unipv.it>
5099 Date: Mon Feb 9 15:53:31 2009 +0100
5101 Nand driver for Nomadik SoC
5103 This driver implements the ECC algorithm described in
5104 the CPU data sheet and uses the OOB layout chosen in
5105 already-released development systems (shipped with a custom-made
5108 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
5109 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
5111 commit ef339cc2b68e4cbef3f9376a45315e1b974bbd8d
5112 Author: Alessandro Rubini <rubini@unipv.it>
5113 Date: Mon Feb 9 15:53:31 2009 +0100
5115 Added nomadik.h header
5117 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
5118 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
5120 commit 60ece6d8043d1dd80f5dd32c541213716d624b19
5121 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5122 Date: Wed Oct 29 20:05:18 2008 +0900
5124 r8a66597-hcd: fix cannot use external hub
5126 Fix the problem that cannot use external hub, because this driver
5127 did not control correctly a DEVADDx register.
5129 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5130 Signed-off-by: Remy Bohmer <linux@bohmer.net>
5132 commit e1ffaee728190e76a4596a3579d94e730143585f
5133 Author: Mike Frysinger <vapier@gentoo.org>
5134 Date: Thu Feb 19 01:20:27 2009 -0500
5136 Blackfin: disable syscontrol code for now
5138 Looks like the initcode updates fell out of order during my merges. The
5139 patch that really fixes up this code is part of power-on overhaul and so
5140 is too large for merging at this point. Instead, we can disable the code
5141 as no currently in-tree board depends on it. The next merge window will
5142 fix things up properly.
5144 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5146 commit 1b228d68f54832edd867ef98520f760f68192ab7
5147 Author: Mike Frysinger <vapier@gentoo.org>
5148 Date: Thu Feb 19 01:19:49 2009 -0500
5150 Blackfin: bf537-stamp: fix I2C board defines
5152 The previous merge for cleaning up the I2C driver incorrectly reverted the
5153 CFG_xxx rename for some of the I2C defines.
5155 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5156 Signed-off-by: Heiko Schocher <hs@denx.de>
5158 commit 09fee8e8677a6265e89144ccc163bf00e321769e
5159 Author: Wolfgang Denk <wd@denx.de>
5160 Date: Sun Feb 22 01:19:52 2009 +0100
5162 Coding Style cleanup; update CHANGELOG
5164 Signed-off-by: Wolfgang Denk <wd@denx.de>
5166 commit 1dcb50afbb63a439320a985380a0af2dca079d1e
5167 Author: Wolfgang Denk <wd@denx.de>
5168 Date: Sun Feb 22 01:17:47 2009 +0100
5170 Makefile: fix cleanup
5172 Commit e4943ec5 moved the ARM boards to a vendor directory but forgot
5173 to adapt the cleanup rules in the Makefile
5175 Signed-off-by: Wolfgang Denk <wd@denx.de>
5177 commit edff7bcc4d5540df8b416274652ff02e94c38b9e
5178 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
5179 Date: Fri Feb 20 13:01:56 2009 -0500
5181 Cleanup the comment for m68k linux boot argument passing.
5183 This patch clarifies the way m68k passes linux boot argument.
5184 The one gotcha here is that the assembly instruction that
5185 the compiler uses to jump to the kernel is 'jsr' which pushes the
5186 program counter for the instruction after the jsr into the stack pointer.
5188 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
5189 Signed-off-by: Wolfgang Denk <wd@denx.de>
5191 commit 4d41650eec959668280a612467bd95c7b8398513
5192 Author: Peter Griffin <pgriffin@mpc-data.co.uk>
5193 Date: Tue Feb 10 16:44:45 2009 +0000
5195 sh: Fix rsk7203 in tree build
5197 Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
5199 commit fca0cecff73db99d99ad094cca7980472b8a11b5
5200 Author: Minkyu Kang <mk7.kang@samsung.com>
5201 Date: Wed Feb 18 09:05:52 2009 +0900
5203 bootm: Reduce the unnecessary memmove
5205 Although load address and image start address are same address,
5206 bootm command always does memmove.
5207 That is unnecessary memmove and can be taken few milliseconds
5208 (about 500 msec to 1000 msec).
5209 If skip this memmove, we can reduce the boot time.
5211 Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
5213 commit 670cbde8da83690fed1064c3358f54ae1d693ed2
5214 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
5215 Date: Sun Feb 15 22:29:15 2009 +0100
5217 fpga: Fix Spartan III FPGA booting
5219 This patch does some minor fixing of the Xilinx Spartan III
5222 - Fixed call order of post configuration callback and
5223 success message printing (result of copy-paste?)
5224 - remove obsolete comment
5225 - minor coding style cleanup
5227 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5229 commit 3818b677641038d27b2663fbd6771ad38c932f86
5230 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
5231 Date: Sun Feb 15 22:28:36 2009 +0100
5233 fpga: Fix Spartan II FPGA booting
5235 This patch does some minor fixing of the Xilinx Spartan II
5238 - Fixed call order of post configuration callback and
5239 success message printing (result of copy-paste?)
5240 - relocate post configuration callback only when it
5242 - remove obsolete comment
5243 - minor coding style cleanup
5245 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5247 commit b4746d8bf9f4ed6dc8a76c5d52db669604aff84b
5248 Author: Mike Frysinger <vapier@gentoo.org>
5249 Date: Wed Feb 11 20:26:52 2009 -0500
5251 drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)
5253 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5255 commit 6bcb4b806cef8a5dd08fac9a4a672b96d9ee804e
5256 Author: Derek Ou <dou@siconix.com>
5257 Date: Tue Feb 3 16:00:07 2009 -0700
5259 lcd_putc bug fix for tab.
5261 Signed-off-by: Derek Ou <dou@siconix.com>
5263 commit 35c9e14d8096e519fe76c953a43d52a09617345c
5264 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5265 Date: Mon Feb 2 09:46:21 2009 +0900
5267 MIPS: cpu/mips/Makefile: Add a missing START line
5269 In the commit 79b51ff8205f0354d5300570614c1d2db499679c ([MIPS] cpu/mips/
5270 Makefile: Split [CS]OBJS onto separate lines), I wrongly deleted a START
5271 line. This patch puts it back.
5273 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
5275 commit 9a63b7f4f8f3c99cf017e0d3d4a152dfcd913b5a
5276 Author: Wolfgang Denk <wd@denx.de>
5277 Date: Sat Feb 21 21:51:21 2009 +0100
5279 Enable ext2 support for TQM8xxL/M based boards
5281 Signed-off-by: Wolfgang Denk <wd@denx.de>
5283 commit e3ba7f137c7c454ad626cd0bd2e84d73c7a8644f
5284 Author: Tom Rix <Tom.Rix@windriver.com>
5285 Date: Fri Feb 20 03:47:50 2009 +0100
5287 ARM:PXA Use new definitions in mmc.h
5289 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
5290 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5292 commit 682beeac34dc9ab18fab58b26973d2e29d113717
5293 Author: Andy Fleming <afleming@freescale.com>
5294 Date: Fri Feb 20 03:47:50 2009 +0100
5296 Reduce the scope of PXA's mmc_read/mmc_write/mmc_bread functions
5298 These names are being taken over by the new MMC framework. Hopefuly
5299 the PXA can be easily ported, and these functions will go away entirely.
5301 Signed-off-by: Andy Fleming <afleming@freescale.com>
5302 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5304 commit b03d92e5584935886ff91d5aa0755dc8888b7187
5305 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5306 Date: Fri Feb 20 03:47:50 2009 +0100
5308 pxa: move mmc drivers to drivers/mmc
5310 introduce new macro CONFIG_PXA_MMC to activate it
5312 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5314 commit 9490f465642c80c054854689a2ef1a77d65cf1f3
5315 Author: Tom Rix <Tom.Rix@windriver.com>
5316 Date: Thu Feb 19 19:27:22 2009 -0600
5318 ARM:PXA Remove redefinition of mmc_cid and mmc_csd.
5320 These structures are defined in the common mmc.h
5322 This was compile checked on cerf250.
5324 commit 94a3312920b6f9b5da27309549fb73650718c10a
5325 Author: Micha Kalfon <smichak.uv@gmail.com>
5326 Date: Wed Feb 11 19:50:11 2009 +0200
5328 pxa: fixing get_timer to return time in miliseconds.
5330 Fixing the get_timer function to return time in miliseconds instead of
5331 ticks. Also fixed PXA boards to use the conventional value of 1000 for
5334 Signed-off-by: Micha Kalfon <smichak.uv@gmail.com>
5336 commit e5e88c3614b79b54719905f66aefb51f9494bc1f
5337 Author: Tom Rix <Tom.Rix@windriver.com>
5338 Date: Thu Feb 19 16:45:43 2009 -0600
5340 ARM:OMAP3 Change mmc_init to mmc_legacy_init
5342 omap3_mmc.c was changed to define mmc_legacy_init.
5343 Remove unused functions.
5345 Compile tested on all arm
5346 Runtime tested on Zoom1.
5348 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
5350 commit 9e80bb21629988063574f88ca0d28baadff4d963
5351 Author: Heiko Schocher <hs@denx.de>
5352 Date: Thu Feb 19 17:23:58 2009 +0100
5354 82xx, mgcoge: updates for 2009.03
5356 - activate CS4 for accessing the FPGA
5357 - activate Rx buf len > 1 on SMC
5359 - MTDPARTS_DEFAULT defined
5360 - update the size of the flashes in the DTS
5361 before booting Linux
5362 - MONITOR_LEN updated to 384k
5363 - added CONFIG_HOSTNAME
5364 - added CONFIG_ENV_BUFFER_PRINT
5365 - Environment size reduced to 16k
5367 Signed-off-by: Heiko Schocher <hs@denx.de>
5369 commit df909554e2401f307925e1bd45d576e4176d9de9
5370 Author: Heiko Schocher <hs@denx.de>
5371 Date: Thu Feb 19 17:24:01 2009 +0100
5373 8xx, mgsuvd: updates for 2009.03
5375 - activate Rx buf len > 1 on SMC
5377 - MTDPARTS_DEFAULT defined
5378 - update the size of the flash in the DTS
5379 before booting Linux
5380 - MONITOR_LEN updated to 384k
5381 - added CONFIG_HOSTNAME
5382 - added CONFIG_ENV_BUFFER_PRINT
5383 - Environment size reduced to 16k
5385 Signed-off-by: Heiko Schocher <hs@denx.de>
5387 commit 3511b4e208e12be85b532866f1c660aa2e021557
5388 Author: Dirk Behme <dirk.behme@googlemail.com>
5389 Date: Wed Feb 18 19:59:39 2009 +0100
5391 MMC: Don't use new framework code if not enabled
5393 Don't use code of new MMC framework in cmd_mmc if CONFIG_GENERIC_MMC
5396 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
5398 commit 32482be67775e00b4cbc49fba62347c1ecc6229c
5399 Author: Wolfgang Denk <wd@denx.de>
5400 Date: Thu Feb 19 13:53:29 2009 +0100
5402 TQM8xxL: make some room in low memory for future needs
5404 THe TQM8xxL use a ahnd-optimized linker script to efficiently use the
5405 small boot sectors in the flash. This patch makes some room in the
5406 first sector to prepare for a size increase of lib_generic/vsprintf.o
5409 Signed-off-by: Wolfgang Denk <wd@denx.de>
5411 commit c157cec3c3f6dfc194532b3a3ca87f85b642962a
5412 Author: Kim Phillips <kim.phillips@freescale.com>
5413 Date: Wed Feb 18 18:06:18 2009 -0600
5415 README: remove duplicate entry
5417 it's been around since the original commit (2ad6b513) that added two
5420 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5422 commit 1bba30efe1717bea13026e15c7c7d906419fac69
5423 Author: Wolfgang Denk <wd@denx.de>
5424 Date: Thu Feb 19 00:41:08 2009 +0100
5426 Coding style cleanup, update CHANGELOG
5428 Signed-off-by: Wolfgang Denk <wd@denx.de>
5430 commit 369d0aa9674b65c83f8553b9bcf9d207dc369223
5431 Author: Kim Phillips <kim.phillips@freescale.com>
5432 Date: Wed Feb 18 17:43:59 2009 -0600
5434 sata_sil3114: fix compiler warning
5436 judging from other printfs in the same file, it seems ata should be
5437 postpended with the interface number, not the address of the global
5438 port variable. Fixes this for current u-boot-mpc83xx tree:
5440 Configuring for MPC8349ITX board...
5441 sata_sil3114.c: In function 'sata_bus_softreset':
5442 sata_sil3114.c:99: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
5443 sata_sil3114.c:108: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
5445 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5447 commit f5675aa5ceeef30740970ab8ca0c8cbc324945cd
5448 Author: Ron Madrid <ron_madrid@sbcglobal.net>
5449 Date: Wed Feb 18 14:30:44 2009 -0800
5451 Create configuration option for restricted ns16550 functions
5453 This patch will create a configuration option for a minimum configuration for
5454 the ns16550 serial driver at drivers/serial/ns16550.c and will apply this new
5455 configuration option to the SIMPC8313.h config file in order to fix the NAND
5456 bootstrap build error. This option will exclude all functions with exception of
5457 NS16550_putc and NS16550_init. This will be used primarily to save space and
5458 remove unused code from builds in which space is limited.
5460 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
5462 commit 7b0bc0219db8981613259473cf19699ac259b4fb
5463 Author: Kim Phillips <kim.phillips@freescale.com>
5464 Date: Wed Feb 18 16:14:29 2009 -0600
5466 mkconfig: include board config.h before asm/config.h
5468 swapping the include order suppresses warnings for board configs
5469 that define their own CONFIG_MAX_MEM_MAPPED:
5471 In file included from /home/r1aaha/git/u-boot/include/config.h:5,
5472 from /home/r1aaha/git/u-boot/include/common.h:35,
5473 from simpc8313.c:26:
5474 /home/r1aaha/git/u-boot/include/configs/SIMPC8313.h:81:1: warning:
5475 "CONFIG_MAX_MEM_MAPPED" redefined
5476 In file included from /home/r1aaha/git/u-boot/include/config.h:4,
5477 from /home/r1aaha/git/u-boot/include/common.h:35,
5478 from simpc8313.c:26:
5479 /home/r1aaha/git/u-boot/include/asm/config.h:28:1: warning: this is
5480 the location of the previous definition
5482 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5484 commit b8845abdc0dcf20d0944e965153f5ae7a9c3077c
5485 Author: Wolfgang Denk <wd@denx.de>
5486 Date: Wed Feb 18 21:35:38 2009 +0100
5488 Fix build errors after making flash_get_info() non-static
5490 Fix for these build problems:
5491 error: static declaration of 'flash_get_info' follows non-static declaration
5493 Signed-off-by: Wolfgang Denk <wd@denx.de>
5495 commit b4996d6b2140e5da7f1c346f37a67b19907b307a
5496 Author: Stefan Roese <sr@denx.de>
5497 Date: Wed Feb 18 13:18:00 2009 +0100
5499 ppc4xx: PCIe: Change 16GB inbound memory to 4GB
5501 This patch fixes a problem recently seen on some 4xx platforms. For
5502 example on Kilauea PCIe slot #0.
5504 Signed-off-by: Stefan Roese <sr@denx.de>
5506 commit f50fe4bd613c6d35a2c34055f02e9501dd6a9ad5
5507 Author: Stefan Roese <sr@denx.de>
5508 Date: Wed Feb 18 14:05:37 2009 +0100
5510 ppc4xx: Some more PMC405 coding-style cleanup
5512 Signed-off-by: Stefan Roese <sr@denx.de>
5514 commit 2f6eb9170bf91b72ea51dcea2a8b9c11b0e20bc5
5515 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
5516 Date: Sun Feb 15 22:27:47 2009 +0100
5518 ppc4xx: Update PMC405 board support
5520 This patch prepares the good old PMC405 board support for
5521 upcoming PMC405V2 patches.
5523 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5524 Signed-off-by: Stefan Roese <sr@denx.de>
5526 commit c553b5f4a0c77fc76e1d25e71c8aaa47657e2d6f
5527 Author: Matthias Fuchs <matthias.fuchs@esd.eu>
5528 Date: Sun Feb 15 22:26:54 2009 +0100
5530 ppc4xx: Cleanup PMC405 board support
5532 This patch fixes coding style for PMC405 board support.
5533 Also some unneeded features/code is removed.
5535 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
5536 Signed-off-by: Stefan Roese <sr@denx.de>
5538 commit b4e85d0f37b5b924fbf834867ad6d0b31b86f667
5539 Author: Ilya Yanok <yanok@emcraft.com>
5540 Date: Thu Feb 5 04:08:20 2009 +0100
5542 qong: changes to Dave/DENX Qong configuration
5544 1. Changes to the default environment:
5545 - "bootcmd" defined as "run flash_self"
5546 - "saveenv" command removed from "update"
5547 - "uboot" changed to "u-boot" (also in "load")
5548 - "addmtd" variable defined (and added to all boot commands)
5549 2. CONFIG_CMD_JFFS2 defined to enable "mtdparts" command
5550 3. MTDIDS_DEFAULT and MTDPARTS_DEFAULT defined
5551 4. CONFIG_SYS_CBSIZE changed from 256 to 512. That solves the problem
5552 with truncated "bootargs" environment variable.
5554 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
5556 commit 5f0320108870e5d62983d1d5c13a2a087dddf686
5557 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5558 Date: Sun Feb 1 17:07:52 2009 +0100
5560 common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible
5562 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5564 commit ec6f14994602276660f7264c6ab3b91ef1f7614d
5565 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5566 Date: Sun Feb 1 17:07:51 2009 +0100
5568 common/console: coding style cleanup
5570 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5572 commit daaf74f176b548dfd34a9990231f4189201d57ba
5573 Author: Mike Frysinger <vapier@gentoo.org>
5574 Date: Thu Jan 29 20:02:23 2009 -0500
5576 mpc8xx_pcmcia: move CONFIG_8xx out of .c file and into Makefile
5578 Move the CONFIG_8xx mpc8xx_pcmcia.c protection out of the C file and
5579 into the Makefile so we avoid pointless compiling of the file.
5581 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5583 commit 7bd2722e890bc877a3c057d7ccddc80451c99939
5584 Author: Mike Frysinger <vapier@gentoo.org>
5585 Date: Thu Jan 29 20:02:07 2009 -0500
5587 disk: convert part_* files to COBJ-$(CONFIG_XXX) style
5589 Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
5590 avoid pointless compiles.
5592 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5594 commit f05fa9205e04986176dc7ab8b710bcb5fbe9f338
5595 Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
5596 Date: Thu Jan 29 10:35:40 2009 +0200
5598 include/image.h: Ease grepping of image_* functions
5600 Because the functions have been defined using macros, grepping for
5601 their definitions is not possible. This patch adds the real function
5604 Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
5605 Acked-by: Mike Frysinger <vapier@gentoo.org>
5607 commit bdab39d358e63aa47f400a8a76b8d5f283842df3
5608 Author: Mike Frysinger <vapier@gentoo.org>
5609 Date: Wed Jan 28 19:08:14 2009 -0500
5611 rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
5613 The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
5614 rather than a generic "env" command, or anything else related to the
5615 environment. So, let's make sure the define is named accordingly.
5617 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
5619 commit 8b0592b89e0f9f81c9e150c81d96f8a43e4d6101
5620 Author: Valeriy Glushkov <gvv@lstec.com>
5621 Date: Fri Jan 23 20:02:17 2009 +0200
5623 disable imls command if no flash is defined
5625 Default CONFIG_CMD_IMLS must be disabled when CONFIG_SYS_NO_FLASH is defined
5627 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
5629 commit 923aa48126259c13de95131203f1d28bfa5cb889
5630 Author: Rafal Jaworowski <raj@semihalf.com>
5631 Date: Fri Jan 23 13:27:18 2009 +0100
5633 API: Improve glue mid-layer of the API demo application.
5635 - Extend ub_dev_read() and ub_dev_recv() so they return the length actually
5636 read, which allows for better control and error handling (this introduces
5637 additional error code API_ESYSC returned by the glue mid-layer).
5639 - Clean up definitions naming and usage.
5641 - Other minor cosmetics.
5643 Note these changes do not touch the API proper, so the interface between
5644 U-Boot and standalone applications remains unchanged.
5646 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
5648 commit 44a94e596ba0f6d0951b165403c520bf55b1c56f
5649 Author: Rafal Jaworowski <raj@semihalf.com>
5650 Date: Fri Jan 23 13:27:17 2009 +0100
5652 API: Only output test data when reading was successful.
5654 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
5656 commit 7fb6c4f9b06c5539043c8bfc6565710b8090841d
5657 Author: Rafal Jaworowski <raj@semihalf.com>
5658 Date: Fri Jan 23 13:27:16 2009 +0100
5660 API: Provide syscall entry point for the ARM architecture.
5662 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
5663 Acked-by: Rafal Jaworowski <raj@semihalf.com>
5665 commit b84d7d8f1e1066f810866304a16a3583f88e7c98
5666 Author: Rafal Jaworowski <raj@semihalf.com>
5667 Date: Fri Jan 23 13:27:15 2009 +0100
5669 API: Use stack pointer as API signature search hint in the glue layer.
5671 De-hardcode range in RAM we search for the API signature. Instead use the stack
5672 pointer as a hint to narrow down the range in which the signature could reside
5673 (it is malloc'ed on the U-Boot heap, and is hoped to remain in some proximity
5674 from stack area). Adjust PowerPC code in API demo to the new scheme.
5676 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
5677 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
5679 commit 86b4bafdfaf669ede8fd99044abc7e27ea29b4f5
5680 Author: Wolfgang Denk <wd@denx.de>
5681 Date: Tue Feb 17 10:26:38 2009 +0100
5683 TQM8260: fix locations of kernel and ramdisk images in flash
5685 After introducing redundant environment the kernel images was
5686 overlapping with environment.
5688 Signed-off-by: Wolfgang Denk <wd@denx.de>
5690 commit 2b68b23373f96199a0cafbfd7a9f79ed62381ebb
5691 Author: Heiko Schocher <hs@denx.de>
5692 Date: Wed Feb 11 19:26:15 2009 +0100
5694 83xx: add missing TIMING_CFG1_CASLAT_* defines
5696 Signed-off-by: Heiko Schocher <hs@denx.de>
5697 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5699 commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5
5700 Author: Valeriy Glushkov <gvv@lstec.com>
5701 Date: Thu Feb 5 14:35:21 2009 +0200
5703 mpc8349itx: allow SATA boot from the onboard SIL1334
5705 This patch allows using of SATA devices connected
5706 to the onboard PCI SIL1334 SATA controller.
5708 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
5709 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
5711 commit e1ac387f4645499746856adc1aeaa9787da2eca6
5712 Author: Andy Fleming <afleming@freescale.com>
5713 Date: Thu Oct 30 16:50:14 2008 -0500
5715 83xx: Add eSDHC support on 8379 EMDS board
5717 Signed-off-by: Andy Fleming <afleming@freescale.com>
5719 commit 80522dc8369a89938369fbcee572e662373bc9a3
5720 Author: Andy Fleming <afleming@freescale.com>
5721 Date: Thu Oct 30 16:51:33 2008 -0500
5723 85xx: Add eSDHC support for 8536 DS
5725 Signed-off-by: Andy Fleming <afleming@freescale.com>
5727 commit 50586ef24ed5caf6ce5591df76f355009da2cd79
5728 Author: Andy Fleming <afleming@freescale.com>
5729 Date: Thu Oct 30 16:47:16 2008 -0500
5731 Add support for the Freescale eSDHC found on 8379 and 8536 SoCs
5733 This uses the new MMC framework
5735 Some contributions by Dave Liu <daveliu@freescale.com>
5737 Signed-off-by: Andy Fleming <afleming@freescale.com>
5739 commit 272cc70b211e945e4413122aa73868f6ada732a5
5740 Author: Andy Fleming <afleming@freescale.com>
5741 Date: Thu Oct 30 16:41:01 2008 -0500
5745 Here's a new framework (based roughly off the linux one) for managing
5746 MMC controllers. It handles all of the standard SD/MMC transactions,
5747 leaving the host drivers to implement only what is necessary to
5748 deal with their specific hardware.
5750 This also hooks the infrastructure into the PowerPC board code
5751 (similar to how the ethernet infrastructure now hooks in)
5753 Some of this code was contributed by Dave Liu <daveliu@freescale.com>
5755 Signed-off-by: Andy Fleming <afleming@freescale.com>
5757 commit 1de97f9856f697380cc504126ab92561ed238803
5758 Author: Andy Fleming <afleming@freescale.com>
5759 Date: Thu Oct 30 16:31:39 2008 -0500
5761 Eliminated arch-specific mmc header requirement
5763 The current MMC infrastructure relies on the existence of an
5764 arch-specific header file. This isn't necessary, and a couple
5765 drivers were forced to implement dummy files to meet this requirement.
5766 Instead, we move the stuff in those header files into a more appropriate
5767 place, and eliminate the stubs and the #include of asm/arch/mmc.h
5769 Signed-off-by: Andy Fleming <afleming@freescale.com>
5771 commit abb5466ccf4ce50f412d459586f4f4b81cb73ac3
5772 Author: Andy Fleming <afleming@freescale.com>
5773 Date: Thu Oct 30 16:21:00 2008 -0500
5775 Convert mmc_init to mmc_legacy_init
5777 This is to get it out of the way of incoming MMC framework
5779 Signed-off-by: Andy Fleming <afleming@freescale.com>
5781 commit b2e2ed0233a5ef299361abec4fbdaefb63456eff
5782 Author: Andy Fleming <afleming@freescale.com>
5783 Date: Thu Oct 30 16:19:25 2008 -0500
5785 Eliminate support for using MMC as memory
5787 MMC cards are not memory, so we stop treating them that way.
5789 Signed-off-by: Andy Fleming <afleming@freescale.com>
5791 commit e1be0d25ecf494ae81245ca438738ba839d6329b
5792 Author: Poonam_Aggrwal-b10812 <b10812@freescale.com>
5793 Date: Sun Jan 4 08:46:38 2009 +0530
5795 32bit BUg fix for DDR2 on 8572
5797 This errata fix is required for 32 bit DDR2 controller on 8572.
5798 May also be required for P10XX20XX platforms
5800 Signed-off-by: Poonam_Agarwal-b10812 <b10812@lc1106.zin33.ap.freescale.net>
5802 commit e0c4fac79d4d74572ddd43f75e7189cecca8d0ad
5803 Author: Andy Fleming <afleming@freescale.com>
5804 Date: Mon Feb 16 09:40:20 2009 -0600
5806 TQM85xx: Fix a couple warnings in TQM8548 build
5808 The ecm variable in sdram.c was being declared for all 8548, but only
5809 used by specific 8548 boards, so we make that variable require those
5810 specific boards, too
5812 The nand code was using an index "i" into a table, and then re-using "i"
5813 to set addresses for each upm. However, then it relied on the old value
5814 of i still being there to enable things. Changed the second "i" to "j"
5816 Signed-off-by: Andy Fleming <afleming@freescale.com>
5818 commit cf07a5baece0ecfc5284cfda8a4e68eaf92782f8
5819 Author: Wolfgang Grandegger <wg@grandegger.com>
5820 Date: Wed Feb 11 18:38:26 2009 +0100
5822 MPC85xx: TQM8548: workaround for erratum DDR 19 and 20
5824 This patch adds the workaround for erratum DDR20 according to MPC8548
5825 Device Errata document, Rev. 1: "CKE signal may not function correctly
5826 after assertion of HRESET". Furthermore, the bug DDR19 is fixed in
5827 processor version 2.1 and the work-around must be removed.
5829 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5831 commit 080408fdc71706adcb883d22125637c54f6010b1
5832 Author: Wolfgang Grandegger <wg@grandegger.com>
5833 Date: Wed Feb 11 18:38:25 2009 +0100
5835 MPC85xx: TQM8548: use cache for AG and BE variants
5837 This patch makes accesses to the system memory cachable by removing the
5838 caching-inhibited and guarded flags from the relevant TLB entries for
5839 the TQM8548_BE and TQM8548_AG modules. FYI, the Freescale MPC85* boards
5840 are configured similarly.
5842 This results in a big averall performace improvement. TFTP downloads,
5843 NAND Flash accesses, kernel boots, etc. are much faster.
5845 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5847 commit dc5f55d636d7bf21ba17758fac4b929ec4c059f2
5848 Author: Wolfgang Grandegger <wg@grandegger.com>
5849 Date: Wed Feb 11 18:38:24 2009 +0100
5851 MPC85xx: TQM8548_AG: add 1 GiB DDR2-SDRAM configuration
5853 This patch add support for the 1 GiB DDR2-SDRAM on the TQM8548_AG
5856 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
5857 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5859 commit 88b0e88d186479349e5a2b771e82775109e10fb4
5860 Author: Wolfgang Grandegger <wg@grandegger.com>
5861 Date: Wed Feb 11 18:38:23 2009 +0100
5863 MPC85xx: TQM8548: fix SDRAM timing for 533 MHz
5865 According to new TQM8548 timing specification:
5866 Refresh Recovery: 34 -> 53 clocks
5867 CKE pulse width: 1 -> 3 cycles
5868 Window for four activities: 13 -> 14 cycles
5870 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
5871 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5873 commit a865bcdac89278cac4dfc07dec8299403110499d
5874 Author: Wolfgang Grandegger <wg@grandegger.com>
5875 Date: Wed Feb 11 18:38:22 2009 +0100
5877 MPC85xx: TQM8548: add support for the TQM8548_AG module
5879 The TQM8548_AG is a variant of the TQM8548 module with 1 GiB memory,
5880 CAN and without PCI/PCI-X and RTC. U-Boot can be built for this module
5881 with "$ make TQM8548_AG_config".
5883 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5885 commit ad7ee5d43b0db94079d56521dabca25674f28747
5886 Author: Wolfgang Grandegger <wg@grandegger.com>
5887 Date: Wed Feb 11 18:38:21 2009 +0100
5889 MPC85xx: TQM8548: add support for the TQM8548_BE module
5891 The TQM8548_BE is a variant of the TQM8548 module with NAND and CAN
5892 interface. With NAND support, the image is significantly larger and
5893 TEXT_BASE is adjusted accordingly. U-Boot can be built for this
5894 module with "$ make TQM8548_BE_config".
5896 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5898 commit a318234878c346e673b2ef8dc4b14b338fe7fc2b
5899 Author: Wolfgang Grandegger <wg@grandegger.com>
5900 Date: Wed Feb 11 18:38:20 2009 +0100
5902 MPC85xx: TQM85xx: make standard PCI/PCI-X configurable
5904 The TQM8548_AG module does not have the standard PCI/PCI-X interface
5905 connected but just the PCI Express interface . So far it was not
5906 possible to disable it without disabling the complete PCI interface
5907 (CONFIG_PCI) including PCI Express.
5909 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5911 commit 31ca9119c3186cec579b54d2a7a2b361b4d2b7bf
5912 Author: Wolfgang Grandegger <wg@grandegger.com>
5913 Date: Wed Feb 11 18:38:19 2009 +0100
5915 MPC85xx: TQM85xx: fix flash protection for boot loader
5917 As the reset vector is located at 0xfffffffc, all flash sectors from the
5918 beginning of the U-Boot binary to 0xffffffff must be protected. On the
5919 TQM8548-AG having small sectors at the end of the flash it happened that
5920 the last two sector were not protected and an "erase all" left an
5921 un-bootable system behind:
5923 Bank # 2: CFI conformant FLASH (32 x 16) Size: 32 MB in 270 Sectors
5924 AMD Standard command set, Manufacturer ID: 0xEC, Device ID: 0x257E
5925 Erase timeout: 8192 ms, write timeout: 1 ms
5927 FFFA0000 E RO FFFC0000 RO FFFE0000 RO FFFE4000 RO FFFE8000 RO
5928 FFFEC000 RO FFFF0000 RO FFFF4000 RO FFFF8000 E FFFFC000
5930 The same bug seems to be in drivers/mtd/cfi_flash.c:flash_init() and many
5933 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
5935 commit a1c8a719262151f97119e76166043ee3da3f97b2
5936 Author: Peter Tyser <ptyser@xes-inc.com>
5937 Date: Fri Feb 6 14:30:40 2009 -0600
5939 86xx: Update CPU info output on bootup
5941 - Update style of 86xx CPU information on boot to more closely
5943 - Fix detection of 8641/8641D
5944 - Use strmhz() to display frequencies
5945 - Display L1 information
5946 - Display L2 cache size
5947 - Fixed CPU/SVR version output
5952 Core: E600 Core 0, Version: 0.2, (0x80040202)
5953 System: Unknown, Version: 2.1, (0x80900121)
5954 Clocks: CPU:1066 MHz, MPX: 533 MHz, DDR: 266 MHz, LBC: 133 MHz
5956 Board: X-ES XPedite5170 3U VPX SBC
5959 CPU: 8641D, Version: 2.1, (0x80900121)
5960 Core: E600 Core 0, Version: 2.2, (0x80040202)
5961 Clock Configuration:
5962 CPU:1066.667 MHz, MPX:533.333 MHz
5963 DDR:266.667 MHz (533.333 MT/s data rate), LBC:133.333 MHz
5964 L1: D-cache 32 KB enabled
5965 I-cache 32 KB enabled
5967 Board: X-ES XPedite5170 3U VPX SBC
5969 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
5971 commit 22c00f8d7d454d77e759df58415d2d3f3d7e154c
5972 Author: Peter Tyser <ptyser@xes-inc.com>
5973 Date: Thu Feb 5 11:25:24 2009 -0600
5975 86xx: Update Global Utilities structure
5977 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
5979 commit 4ef630df773e45806d701bf5d25c328778bb4cde
5980 Author: Peter Tyser <ptyser@xes-inc.com>
5981 Date: Thu Feb 5 11:25:25 2009 -0600
5985 Update the 86xx reset sequence to try executing a board-specific reset
5986 function. If the board-specific reset is not implemented or does not
5987 succeed, then assert #HRESET_REQ. Using #HRESET_REQ is a more standard
5988 reset procedure than the previous method and allows all board
5989 peripherals to be reset if needed.
5991 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
5993 commit edf0e2524a8c6a3e91c009c496a0aa0ae89cd8ab
5994 Author: Kumar Gala <galak@kernel.crashing.org>
5995 Date: Tue Feb 10 23:53:40 2009 -0600
5997 fsl-ddr: Allow system to boot if we have more than 4G of memory
5999 Previously if we >=4G of memory and !CONFIG_PHYS_64BIT we'd report
6000 an error and hang. Instead of doing that since DDR is mapped in the
6001 lowest priority LAWs we setup the DDR controller and the max amount
6002 of memory we report back is what we can map (CONFIG_MAX_MEM_MAPPED)
6004 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6005 Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
6007 commit 8d949aff38cfb4388cbd73876e77bcd06d601f20
6008 Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
6009 Date: Wed Jan 21 17:17:33 2009 -0600
6011 mpc85xx: Add support for the P2020
6013 Added various p2020 processor specific details:
6014 * SVR for p2020, p2020E
6015 * immap updates for LAWs and DDR on p2020
6016 * LAW defines related to p2020
6018 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
6019 Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
6020 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6022 commit cb69e4de8702e108324e1c40363f30ef6f2e2918
6023 Author: Kumar Gala <galak@kernel.crashing.org>
6024 Date: Tue Feb 10 17:36:15 2009 -0600
6026 85xx: print boot header info to distinquish 36-bit addr map on MPC8572 DS
6028 Added some info that is printed out when we boot to distiquish if we
6029 built MPC8572DS_config vs MPC8572DS_36BIT_config since they have
6030 different address maps.
6032 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6034 commit feede8b07013b33fca8dd2a916b3ac86bf4d4c0a
6035 Author: Andy Fleming <afleming@freescale.com>
6036 Date: Fri Dec 5 20:10:22 2008 -0600
6038 Fixup SGMII PHY ids in the device tree
6040 The device tree's PHY addresses need to be fixed up if we're using the
6043 The 8572, 8536, and 8544 DS boards were modified to call this function.
6045 Code idea taken from Liu Yu <yu.liu@freescale.com>
6047 Signed-off-by: Andy Fleming <afleming@freescale.com>
6049 commit 5dc0cf68f8f101042997d75188081d8526d705ea
6050 Author: Andy Fleming <afleming@freescale.com>
6051 Date: Wed Feb 11 15:10:31 2009 -0600
6053 Make some minor whitespace changes to eliminate line-wrapping
6055 Signed-off-by: Andy Fleming <afleming@freescale.com>
6057 commit 9e56986a2b74d197f51eca70fad7b836b1900c4d
6058 Author: Andy Fleming <afleming@freescale.com>
6059 Date: Wed Feb 11 15:07:24 2009 -0600
6061 Add eth_get_dev_by_index
6063 This allows code to iterate through the ethernet devices
6065 Signed-off-by: Andy Fleming <afleming@freescale.com>
6067 commit b67305120aaf268a6140125346678166d14f1f47
6068 Author: Kumar Gala <galak@kernel.crashing.org>
6069 Date: Mon Feb 9 22:03:04 2009 -0600
6071 85xx: Fix bug in device tree setup in 36-bit physical confg
6073 In the 36-bit physical config for MPC8572DS when need the start address
6074 of memory and it size to be kept in phys_*_t instead of a ulong since
6075 we support >4G of memory in the config and ulong cant represent that.
6076 Otherwise we end up seeing the memory node in the device tree reporting
6077 back we have memory starting @ 0 and of size 0.
6079 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6081 commit ad97dce18445ff05bf326094e691a01aa95aa8dc
6082 Author: Kumar Gala <galak@kernel.crashing.org>
6083 Date: Mon Feb 9 22:03:05 2009 -0600
6085 85xx: Fix address map for 36-bit config of MPC8572DS
6087 When we introduced the 36-bit config of the MPC8572DS board we had the
6088 wrong PCI MEM bus address map. Additionally, the change to the address
6089 map exposes a small issue in our dummy read on the ULI bus. We need
6090 to use the new mapping functions to handle that read properly in the
6093 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6095 commit f8523cb0815b2d3d2d780b7d49ca614105555f58
6096 Author: Kumar Gala <galak@kernel.crashing.org>
6097 Date: Fri Feb 6 09:56:35 2009 -0600
6099 85xx: Fix how we map DDR memory
6101 Previously we only allowed power-of-two memory sizes and didnt
6102 handle >2G of memory. Now we will map up to CONFIG_MAX_MEM_MAPPED
6103 and should properly handle any size that we can make in the TLBs
6104 we have available to us
6106 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6108 commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
6109 Author: Kumar Gala <galak@kernel.crashing.org>
6110 Date: Fri Feb 6 09:56:34 2009 -0600
6112 fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controller
6114 If we only have one controller we can completely ignore how
6115 memctl_intlv_ctl is set. Otherwise other levels of code get confused
6116 and think we have twice as much memory.
6118 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6120 commit b29dee3c906e9daaf6baf7772d2e15e26b8636b8
6121 Author: Kumar Gala <galak@kernel.crashing.org>
6122 Date: Wed Feb 4 09:35:57 2009 -0600
6124 85xx: Format cpu freq printing to handle 8 cores
6126 Only print 4 cpu freq per line. This way when we have 8 cores its a
6129 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6131 commit 9704f9caf53f5cae547d8c5e1ae94aa4e57b160f
6132 Author: Abraham, Thomas <t-abraham@ti.com>
6133 Date: Tue Oct 28 16:51:31 2008 +0530
6135 USB: Remove LUN number from CDB
6137 The LUN number is not part of the Command Descriptor Block (CDB) for scsi inquiry, request sense, test unit ready, read capacity and read10 commands. This patch removes the LUN number information from the CDB.
6139 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
6140 Signed-off-by: Remy Bohmer <linux@bohmer.net>
6142 commit f3c0de636252f3a18654c8f9c6370a9574a7e755
6143 Author: Atin Malaviya <atin.malaviya@gmail.com>
6144 Date: Tue Feb 3 15:17:10 2009 -0500
6146 Added usbtty_configured() check. Fixed attribute(packed) warnings.
6148 V3: Fixed line-wrap problem due to user error in mail!
6150 Added usb_configured() checks in usbtty_puts() and usbtty_putc() to get around a hang
6151 when usb is not connected and the user has set up multi-io (setenv stdout serial,usbtty etc).
6152 Got rid of redundant __attribute__((packed)) directives that were causing warnings from gcc.
6154 Signed-off-by: Atin Malaviya <atin.malaviya@gmail.com>
6155 Signed-off-by: Remy Bohmer <linux@bohmer.net>
6157 commit e7de18afe8ecf96a51ef981d06066eeb6b1254e7
6158 Author: Guennadi Liakhovetski <lg@denx.de>
6159 Date: Fri Feb 13 09:23:36 2009 +0100
6161 i.MX31: Start the I2C clock on driver initialisation
6163 i.MX31 powers on with most clocks running, so, after a power on this explicit
6164 clock start up is not required. However, as Linux boots it disables most clocks
6165 to save power. This includes the I2C clock. If we then soft reboot from Linux
6166 the I2C clock stays off. This breaks the phycore, which has its environment in
6167 I2C EEPROM. Fix the problem by explicitly starting the clock in I2C driver
6168 initialisation routine.
6170 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6171 Ack-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6173 commit 15208ac9eae1c340c4bc11f70cbf5c9da78a57ba
6174 Author: Mike Frysinger <vapier@gentoo.org>
6175 Date: Wed Feb 11 20:36:14 2009 -0500
6177 i2c.h: drop i2c_reg_{read, write} hack for Blackfin parts
6179 The Blackfin i2c driver has been rewritten thus the special ifdefs in the
6180 common code are no longer needed.
6182 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6184 commit c2d9befa0b4695b89476fb5d259742c09afe243f
6185 Author: Heiko Schocher <hs@denx.de>
6186 Date: Thu Feb 12 08:08:54 2009 +0100
6188 82xx, mgcoge: fix compile error
6190 With actual u-boot compiling the mgcoge port fails, because
6191 since commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 it is
6192 necessary to define CONFIG_NET_MULTI.
6194 Seems to me the mgcoge port is the only actual existing 8260
6195 port who uses CONFIG_ETHER_ON_SCC, so no other 8260 port needed
6198 Signed-off-by: Heiko Schocher <hs@denx.de>
6200 commit 9cacf4fc4035eabe9d9ae2a9a188c51a8027c91e
6201 Author: Dirk Eibach <eibach@gdsys.de>
6202 Date: Mon Feb 9 08:18:34 2009 +0100
6204 ppc4xx: Add README entry for CONFIG_PCI_DISABLE_PCIE
6206 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
6207 Signed-off-by: Stefan Roese <sr@denx.de>
6209 commit 7369f0e384e2a831be13a7773a58242c9173fa9c
6210 Author: Carolyn Smith <carolyn.smith@tektronix.com>
6211 Date: Thu Feb 12 06:13:44 2009 +0100
6213 ppc4xx: Fix initialization of the SDRAM_CODT register
6215 This fixes the initialization of the SDRAM_CODT register in the ppc4xx DDR2
6216 initialization code. It also removes use of the SDRAM_CODT_FEEDBACK_RCV_SINGLE_END
6217 and SDRAM_CODT_FEEDBACK_DRV_SINGLE_END #define's since they are reserved bits.
6219 Signed-off-by: Carolyn Smith <carolyn.smith@tektronix.com>
6220 Signed-off-by: Stefan Roese <sr@denx.de>
6222 commit cef0efaf2fa55d1f25066cfb02bd984c27f9ca31
6223 Author: Stefan Roese <sr@denx.de>
6224 Date: Wed Feb 11 09:29:33 2009 +0100
6226 ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards
6228 Some AMCC eval boards do have a board_eth_init() function calling
6229 pci_eth_init(). These boards need to call cpu_eth_init() explicitly now
6230 with the new eth_init rework.
6232 Signed-off-by: Stefan Roese <sr@denx.de>
6234 commit c645012aefebb301e6907d148c6c8efacac049d4
6235 Author: Adam Graham <agraham@amcc.com>
6236 Date: Mon Feb 9 13:18:12 2009 -0800
6238 ppc4xx: Autocalibration can set RDCC to over aggressive value.
6240 The criteria of the AMCC SDRAM Controller DDR autocalibration
6241 U-Boot code is to pick the largest passing write/read/compare
6242 window that also has the smallest SDRAM_RDCC.[RDSS] Read Sample
6245 On some Kilauea boards the DDR autocalibration algorithm can
6246 find a large passing write/read/compare window with a small
6247 SDRAM_RDCC.[RDSS] aggressive value of Read Sample Cycle Select
6250 This SDRAM_RDCC.[RDSS] Read Sample Cycle Select value of
6251 "T1 Sample" proves to be to aggressive when later on U-Boot
6252 relocates into DDR memory and executes.
6254 The memory traces on the Kilauea board are short so on some
6255 Kilauea boards the SDRAM_RDCC.[RDSS] Read Sample Cycle Select
6256 value of "T1 Sample" shows up as a potentially valid value for
6257 the DDR autocalibratiion algorithm.
6259 The fix is to define a weak default function which provides
6260 the minimum SDRAM_RDCC.[RDSS] Read Sample Cycle Select value
6261 to accept for DDR autocalibration. The default will be the
6262 "T2 Sample" value. A board developer who has a well defined
6263 board and chooses to be more aggressive can always provide
6264 their own board specific string function with the more
6265 aggressive "T1 Sample" value or stick with the default
6266 minimum SDRAM_RDCC.[RDSS] value of "T2".
6268 Also put in a autocalibration loop fix for case where current
6269 write/read/compare passing window size is the same as a prior
6270 window size, then in this case choose the write/read/compare
6271 result that has the associated smallest RDCC T-Sample value.
6273 Signed-off-by: Adam Graham <agraham@amcc.com>
6274 Signed-off-by: Stefan Roese <sr@denx.de>
6276 commit 2ede879fcb67470524847bb4fc8972651bb46184
6277 Author: Stefan Roese <sr@denx.de>
6278 Date: Wed Feb 11 09:37:12 2009 +0100
6280 ppc4xx: Fix problem with CONFIG_MAX_MEM_MAPPED in include/asm-ppc/config.h
6282 CONFIG_SDRAM_PPC4xx_IBM_DDR2 is not set when include/asm-ppc/config.h is
6283 included. So for katmai, CONFIG_MAX_MEM_MAPPED will get set to 256MB.
6285 It makes perfect sense to set CONFIG_MAX_MEM_MAPPED to 2GB for all PPC4xx
6288 Signed-off-by: Stefan Roese <sr@denx.de>
6290 commit f15c6515fc23f83c51f3de272ca23d86b80e81b1
6291 Author: Wolfgang Denk <wd@denx.de>
6292 Date: Thu Feb 12 00:08:39 2009 +0100
6294 Coding style cleanup; update CHANGELOG
6296 Signed-off-by: Wolfgang Denk <wd@denx.de>
6298 commit 5fc56b907d993260b9ebdb137af66fe69635ae9e
6299 Author: Peter Tyser <ptyser@xes-inc.com>
6300 Date: Fri Jan 30 16:36:40 2009 -0600
6302 Add feature-removal-schedule.txt
6304 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6306 commit 255d28e1642e8fc32a6753226be1a96b481ce111
6307 Author: Heiko Schocher <hs@denx.de>
6308 Date: Tue Feb 10 09:32:38 2009 +0100
6310 8xx serial, smc: Coding-Style cleanup serial SMC driver
6312 Signed-off-by: Heiko Schocher <hs@denx.de>
6314 commit 2b3f12c214346508cae3f1245808c1ca54c81fdd
6315 Author: Heiko Schocher <hs@denx.de>
6316 Date: Tue Feb 10 09:31:47 2009 +0100
6318 8xx serial, smc: add configurable SMC Rx buffer len
6320 This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
6321 With this option it is possible to allow the receive
6322 buffer for the SMC on 8xx to be greater then 1. In case
6323 CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
6326 When defining CONFIG_SYS_SMC_RXBUFLEN also
6327 CONFIG_SYS_MAXIDLE must be defined to setup the maximum
6328 idle timeout for the SMC.
6330 Signed-off-by: Heiko Schocher <hs@denx.de>
6332 commit e915f8bb73d74178bc21d3a457959883b1afd1c0
6333 Author: Mike Frysinger <vapier@gentoo.org>
6334 Date: Thu Feb 5 21:04:36 2009 -0500
6336 common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile
6338 Move global '#ifdef CONFIG_xxx .... #endif' out of the .c files and into
6339 the COBJS-$(CONFIG_xxx) in the Makefile. Also delete unused var in kgdb
6340 code in the process.
6342 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6344 commit ab76e9848a1f4db64d14233741d739a3b3360c93
6345 Author: Mike Frysinger <vapier@gentoo.org>
6346 Date: Thu Feb 5 21:04:50 2009 -0500
6348 bzip2: move ifdef handling to Makefile COBJS-$(...)
6350 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6352 commit ae0b05df04e1cc65c5ad19ccd362f4be82df7316
6353 Author: Jerry Van Baren <gvb.uboot@gmail.com>
6354 Date: Thu Feb 5 22:18:02 2009 -0500
6356 Fix whitespace damage: double space changed to a tab
6358 At some point an intentional double space at the end of the sentence
6359 got changed into a tab in the GPL header line:
6360 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
6362 This patch fixes the damage.
6364 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
6366 commit 4f975678de995b55749d5e84590c268972a7c835
6367 Author: Heiko Schocher <hs@denx.de>
6368 Date: Tue Feb 10 09:53:29 2009 +0100
6370 cfi: make flash_get_info() non static
6372 If on your board is more than one flash, you must know
6373 the size of every single flash, for example, for updating
6374 the DTS before booting Linux. So make this function
6375 flash_get_info() extern, and you can have all info
6378 Signed-off-by: Heiko Schocher <hs@denx.de>
6379 Signed-off-by: Stefan Roese <sr@denx.de>
6381 commit 86321fc1128c93a10ac4afb9d317b0df8ece0f9e
6382 Author: Ben Warren <biggerbadderben@gmail.com>
6383 Date: Thu Feb 5 23:58:25 2009 -0800
6385 net: removed board-specific CONFIGs from MPC5xxx FEC driver
6387 Added new CONFIG options for the three type of MAC-PHY interconnect and
6388 applied them all relevant board config files
6390 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6392 commit 638ed3e296e70fab286d157b7adedaaa4a09a474
6393 Author: Mike Frysinger <vapier@gentoo.org>
6394 Date: Thu Feb 5 21:04:47 2009 -0500
6396 net/sntp.c: move ifdef into Makefile COBJS-$(...)
6398 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6399 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6401 commit 9e5be8214ba751436e57c3be044bf6dccb9a6687
6402 Author: Andy Fleming <afleming@freescale.com>
6403 Date: Tue Feb 3 18:26:41 2009 -0600
6405 tsec: Fix a bug in soft-resetting
6407 SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30
6408 clock cycles, so it's been mostly working. But we had no guarantee, and at
6409 slower bitrates, it's just over a microsecond (over 1000 clock cycles). This
6410 enforces a 2 microsecond gap between assertion and deassertion.
6412 Signed-off-by: Andy Fleming <afleming@freescale.com>
6413 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6415 commit 09fcc8b5d86903b76e7e4d1d879d6f4bca25c27b
6416 Author: Simon Munton <simon@nidoran.m5data.com>
6417 Date: Mon Feb 2 09:44:08 2009 +0000
6419 Fix 100Mbs ethernet operation on sh7763 based boards
6421 100Mbs ethernet does not work on sh7763 chips due to the wrong value being
6422 used in the GECMR register. Following diff fixes the problem
6424 Signed-off-by: Simon Munton <simon@nidoran.m5data.com>
6425 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6427 commit 2bc2a8f6dc9fdda465317da59474e65c24a398a2
6428 Author: ksi@koi8.net <ksi@koi8.net>
6429 Date: Fri Feb 6 16:27:55 2009 -0800
6431 Fix MPC8260 with ethernet on SCC
6433 This fixes MPC8260 compilation with ethernet on SCC. Probably was a
6434 typo or something...
6436 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
6437 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6439 commit ae5d8f613cec1a6af7bf1fc9c42a3b856f021023
6440 Author: Heiko Schocher <hs@denx.de>
6441 Date: Fri Jan 30 12:56:15 2009 +0100
6443 82xx serial, smc: Coding-Style cleanup serial SMC driver
6445 Signed-off-by: Heiko Schocher <hs@denx.de>
6447 commit c92fac91a06c60f874c605e3ca80dd407c1caaa7
6448 Author: Heiko Schocher <hs@denx.de>
6449 Date: Fri Jan 30 12:55:38 2009 +0100
6451 82xx serial, smc: add configurable SMC Rx buffer len
6453 This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
6454 With this option it is possible to allow the receive
6455 buffer for the SMC on 82xx to be greater then 1. In case
6456 CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
6459 When defining CONFIG_SYS_SMC_RXBUFLEN also
6460 CONFIG_SYS_MAXIDLE must be defined to setup the maximum
6461 idle timeout for the SMC.
6463 Signed-off-by: Heiko Schocher <hs@denx.de>
6465 commit bced7ccefa08512c54a6d146658ff7dbc33d5dfe
6466 Author: Kumar Gala <galak@kernel.crashing.org>
6467 Date: Fri Feb 6 08:08:06 2009 -0600
6469 ppc: Fix roll over bug in flush_cache()
6471 If we call flush_cache(0xfffff000, 0x1000) it would never
6472 terminate the loop since end = 0xffffffff and we'd roll over
6473 our counter from 0xfffffe0 to 0 (assuming a 32-byte cache line)
6475 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6477 commit 87c9063963561d3d01064be34d0c30855a56587b
6478 Author: Kumar Gala <galak@kernel.crashing.org>
6479 Date: Thu Feb 5 20:40:58 2009 -0600
6481 ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h
6483 Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent
6484 between the two current users (lib_ppc/board.c, 44x SPD DDR2).
6486 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6487 Acked-by: Stefan Roese <sr@denx.de>
6489 commit 47d41cc3a11a03c6d56146d056145df73f47eb50
6490 Author: Kumar Gala <galak@kernel.crashing.org>
6491 Date: Thu Feb 5 20:40:57 2009 -0600
6493 Add an architecture specific config.h for common defines
6495 We have common defines that we duplicate in various ways. Having an
6496 arch specific config.h gives us a common location for those defines.
6498 Eventually we should be able to replace this when we have proper
6501 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6503 commit 4c78d4a6c01621721b732418e1c6da684a56bbb1
6504 Author: Becky Bruce <beckyb@kernel.crashing.org>
6505 Date: Tue Feb 3 18:10:56 2009 -0600
6507 mpc8641hpcn: Change PCI MEM pci bus address
6509 Now that the rest of u-boot can support it, change the PCI bus
6510 address of the PCI MEM regions from 0x80000000 to 0xc0000000,
6511 and use the same bus address for both PCI1 and PCI2. This will
6512 maximize the amount of PCI address space left over to map RAM
6513 on systems with large amounts of memory.
6515 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6517 commit 1785dbeed43599eed1d8875673c96912cd770141
6518 Author: Becky Bruce <beckyb@kernel.crashing.org>
6519 Date: Tue Feb 3 18:10:55 2009 -0600
6521 drivers/block/ahci: Fix pci mapping bug
6523 The code assumes that the pci bus address and the virtual
6524 address used to access a region are the same, but they might
6525 not be. Fix this assumption.
6527 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6529 commit d591a80e74091e7a0658d165721e6c7de2ef0bcd
6530 Author: Becky Bruce <beckyb@kernel.crashing.org>
6531 Date: Tue Feb 3 18:10:54 2009 -0600
6533 MPC8641HPCN: Enable CONFIG_ADDR_MAP
6535 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6537 commit 49f46f3bf08aaf7b1db131a1082f1e603bb7a94b
6538 Author: Becky Bruce <beckyb@kernel.crashing.org>
6539 Date: Tue Feb 3 18:10:53 2009 -0600
6541 mpc8641hpcn: Clean up PCI mapping concepts
6543 Clean up PCI mapping concepts in the 8641 config - rename _BASE
6544 to _BUS, as it's actually a PCI bus address, separate virtual
6545 and physical addresses into _VIRT and _PHYS, and use each
6548 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6550 commit c9315e6b4f244981de0b2eaaa29a7838a165b494
6551 Author: Becky Bruce <beckyb@kernel.crashing.org>
6552 Date: Tue Feb 3 18:10:52 2009 -0600
6554 mpc86xx: Add support to populate addr map based on BATs
6556 If CONFIG_ADDR_MAP is enabled, update the address map
6557 whenever we write a bat.
6559 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6561 commit d35ae5a938679bd7e18167faf79d0fb3c6639b51
6562 Author: Becky Bruce <beckyb@kernel.crashing.org>
6563 Date: Tue Feb 3 18:10:51 2009 -0600
6565 powerpc: Move duplicated BAT defines to mmu.h
6567 The BAT fields are architected; there's no need for these to be in
6568 cpu-specific files. Drop the duplication and move these to
6569 include/asm-ppc/mmu.h. Also, remove the BL_xxx defines that were only
6570 used by the alaska board, and switch to using the BATU_BL_xxx defines
6571 used by all the other boards. The BL_ defines previously in use
6572 had to be shifted into the proper position for use, which was inefficient.
6574 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6576 commit 6e61fae4d360a1380b63e7d007b31477e366bcce
6577 Author: Becky Bruce <beckyb@kernel.crashing.org>
6578 Date: Tue Feb 3 18:10:50 2009 -0600
6580 drivers/pci: Create pci_map_bar function
6582 It is no longer always true that the pci bus address can be
6583 used as the virtual address for pci accesses. pci_map_bar()
6584 is created to return the virtual address for a pci region.
6586 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6588 commit 2ecca3401775b125c3b9ff65766befb23989414b
6589 Author: Becky Bruce <beckyb@kernel.crashing.org>
6590 Date: Tue Feb 3 18:10:49 2009 -0600
6592 mpc8641hpcn: Set up outbound pci windows before inbound
6594 Because the inbound pci windows are mapped generously, set up
6595 the more specific outbound windows first. This way, when we
6596 search the pci regions for something, we will hit on the more
6597 specific region. This can actually be a problem on systems
6598 with large amounts of RAM.
6600 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6602 commit b81b773ead0687114dc8a800f99ea6e504447739
6603 Author: Becky Bruce <beckyb@kernel.crashing.org>
6604 Date: Mon Feb 2 16:34:52 2009 -0600
6606 mpc8641hpcn: Use physical address in flash banks defintion
6608 If the VA and PA of the flash aren't the same, the banks list
6609 should be initialized to hold the physical address. Correct this.
6611 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
6613 commit 0d19f6c8cbe71b9e6d8c6bd6742ed2551e918870
6614 Author: Ilya Yanok <yanok@emcraft.com>
6615 Date: Tue Feb 10 00:22:31 2009 +0100
6617 qong: support for Dave/DENX QongEVB-LITE board
6619 This patch adds support for Dave/DENX QongEVB-LITE i.MX31-based board.
6621 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
6622 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6624 commit 62cbc408f52fc9a5eb849e0b882c504780c9d183
6625 Author: Ilya Yanok <yanok@emcraft.com>
6626 Date: Mon Feb 9 18:45:28 2009 +0100
6628 dnet: driver for Dave DNET ethernet controller
6630 Driver for Dave DNET ethernet controller (used on Dave/DENX
6631 QongEVB-LITE board).
6633 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
6634 Acked-by: Ben Warren <biggerbadderben@gmail.com>
6636 commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf
6637 Author: Kumar Gala <galak@kernel.crashing.org>
6638 Date: Fri Feb 6 09:49:32 2009 -0600
6640 pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching
6642 When we search for an address match in pci_hose_{phys_to_bus,bus_to_phys}
6643 we should give preference to memory regions that aren't system memory.
6645 Its possible that we have over mapped system memory in the regions and
6646 we want to avoid depending on the order of the regions.
6648 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6650 commit ff4e66e93c1ad47644be3b4ffd6a46e1ce9b6612
6651 Author: Kumar Gala <galak@kernel.crashing.org>
6652 Date: Fri Feb 6 09:49:31 2009 -0600
6654 pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity
6656 The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
6657 can be confusing when reading the code.
6659 Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
6660 for system memory mapping purposes.
6662 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6664 commit 54dc517328709c204a9cbf7a253d9f8e6c4b26ec
6665 Author: Ilya Yanok <yanok@emcraft.com>
6666 Date: Sun Feb 8 00:59:43 2009 +0300
6668 mx31: add GPIO registers definitions
6670 Added definitions for i.MX31 processor GPIO registers.
6672 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
6674 commit 8da601280a8acbc3385784780ed35130e53812f1
6675 Author: Peter Tyser <ptyser@xes-inc.com>
6676 Date: Wed Feb 4 13:47:22 2009 -0600
6678 NAND: Add timeout for reset command
6680 Without the timeout present an infinite loop can occur if the
6681 NAND device is broken or not present.
6683 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6684 Signed-off-by: Scott Wood <scottwood@freescale.com>
6686 commit 10dc6a9bef73d7d4cb25b3fde27ee91f8484b126
6687 Author: Peter Tyser <ptyser@xes-inc.com>
6688 Date: Wed Feb 4 13:39:40 2009 -0600
6690 NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TEST
6692 Commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b removed support
6693 for disabling the "No NAND device found!!!" warning when
6694 CONFIG_SYS_NAND_QUIET_TEST was defined. This re-adds support
6695 for silencing the warning.
6697 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6698 Signed-off-by: Scott Wood <scottwood@freescale.com>
6700 commit ad09ab2e3ac28f304372eceb4a5cb4d24e102a13
6701 Author: Valeriy Glushkov <gvv@lstec.com>
6702 Date: Mon Jan 19 16:32:59 2009 +0200
6704 NAND: Fixed invalid pointers to static relocated chip names
6708 You are right, the patch was ugly.
6709 The new one seems to be better.
6711 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
6712 Signed-off-by: Scott Wood <scottwood@freescale.com>
6714 commit e7deec1bf6fa3b3a21cd8d14fe2a909a42efc9d8
6715 Author: Nishanth Menon <nm@ti.com>
6716 Date: Mon Feb 2 18:20:12 2009 -0600
6718 ARM:OMAP3:Zoom1: Add nand unlock option
6720 Enable NAND_UNLOCK option for unlocking nand for
6721 erase/write operations
6723 Signed-off-by: Nishanth Menon <nm@ti.com>
6725 commit 5a9427dc9b8438759db3f67a1e547062f76eb18d
6726 Author: derek@siconix.com <derek@siconix.com>
6727 Date: Mon Jan 26 14:08:17 2009 -0700
6729 env_nand: fix env memory release
6731 This fixes a bug that tmp environment memory not being released.
6733 Signed-off-by: Derek Ou <dou@siconix.com>
6734 Signed-off-by: Scott Wood <scottwood@freescale.com>
6736 commit 05fd88776419df59e7f37bac063a209409dd801d
6737 Author: Guennadi Liakhovetski <lg@denx.de>
6738 Date: Fri Feb 6 10:37:45 2009 +0100
6740 ARM: remove unused variable
6742 The "size" variable in start_armboot() in lib_arm/board.c is only really
6743 used in "#ifndef CONFIG_SYS_NO_FLASH" case, and even there it can be
6744 eliminated (thanks to Jean-Christophe PLAGNIOL-VILLARD for a suggestion.)
6746 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6748 commit 6989e4f546d960a407dd5425f800dff9751c8132
6749 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6750 Date: Thu Feb 5 09:33:50 2009 -0500
6752 Coldfire: M527x: Add missing GPIO register address defines
6754 Add missing GPIO registers address definition for Coldfire M5271.
6756 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6758 commit c4ff77f5e6c3a01610ce97434c0d59acb1476f95
6759 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6760 Date: Fri Jan 23 14:42:58 2009 -0500
6762 Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command
6764 Modified mii_init to support boards with PHYs that are not set to
6765 autonegotiate, but still want to use u-boot's mii commands to probe
6766 the smi bus. Such PHYs will not set the Autonegotiate-done bit.
6768 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6770 commit 92d3e6e0ffcbb7224c83104f8d87b5b4bf39a38f
6771 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6772 Date: Fri Jan 23 11:44:30 2009 -0500
6774 Coldfire: Applied baudrate formula of serial_init to serial_setbrg
6776 Applied the patch for baudrate divider value truncation for
6777 serial_init to serial_setbrg as well.
6779 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6781 commit 8706ef378f2db1ef65b9c2f909561f23e3dc2148
6782 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6783 Date: Fri Jan 23 14:07:05 2009 -0500
6785 Coldfire: M5271EVB: Board header update (dependencies)
6787 Cleanup for M5271EVB:
6788 Added clarification on the use of CONFIG_SYS_CLOCK.
6789 Modified to use u-boot's HUSH parser.
6790 Cleanup on environment settings.
6791 Removed compiler warning by defining CONFIG_SYS_CS0_*
6794 Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
6795 This depends on a patch to include/asm-m68k/m5271.h
6796 that defines the multiplier and divider ratios.
6798 Removed the definition of CONFIG_SYS_FECI2C.
6799 This depends on a patch that removes the use of it in
6800 cpu/mcf52x2/cpu_init.c
6802 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6804 commit e0db344fabfeb4f9649846f94838f51172f6a1f6
6805 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6806 Date: Thu Jan 29 14:36:06 2009 -0500
6808 Coldfire: M5271: Allow board header file to specify clock multiplier
6810 M5271 dynamic clock multiplier. It is currently fixed at 100MHz.
6812 Allow the board header file to set their own multiplier and divider.
6813 Added the #define for the multiplier and divider to the cpu header file.
6815 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6817 commit d1ef25dd81c79dcfad5c2ff0162b1bea21d04bc3
6818 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6819 Date: Fri Jan 23 10:47:13 2009 -0500
6821 Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C
6823 Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB).
6824 Use read-modify-write to activate the FEC pins without disabling I2C.
6826 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6828 commit ee73cc59ab904976af3c33b454fc84f78618b2d1
6829 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6830 Date: Fri Jan 23 09:45:34 2009 -0500
6832 Coldfire: cmd_bdinfo cleanup
6834 CONFIG_M68K bdinfo cleanup:
6836 Fixed compiler warning about baudrate printing.
6837 format '%d' expects type 'int', but argument 2 has type 'long unsigned int'.
6839 Added printing of "cpufreq"
6841 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6843 commit 4ffc39050aa46ed8a3d29732293dff769e54fffa
6844 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6845 Date: Fri Jan 23 09:27:00 2009 -0500
6847 Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list
6849 Added the CONFIG_M5271 to the list of Coldfire V2 processor. This
6850 was causing the bus clock (not CPU clock) to be declared twice as
6851 fast as it actually is. This causes UARTS to operate at half the
6854 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
6856 commit 59d1bda7f92c8a28c3aba94e48063749d425949f
6857 Author: Dirk Eibach <eibach@gdsys.de>
6858 Date: Tue Feb 3 15:15:21 2009 +0100
6860 ppc4xx: Make PCIE support selectable
6862 On some platforms PCIE support is not required, but would be included
6863 because the cpu supports it. To reduce fooprint it is now configurable
6864 via CONFIG_PCI_DISABLE_PCIE.
6866 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
6867 Signed-off-by: Stefan Roese <sr@denx.de>
6869 commit b129eff5ede394cc1faeb6dbf6a987e91abce552
6870 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6871 Date: Tue Feb 3 22:13:16 2009 +0100
6873 ppc4xx: Only fixup opb attached UARTs
6875 This patch updates the fdt UART clock fixup code to
6876 only touch CPU internal UARTs on 4xx systems.
6877 Only these UARTs are definitely clocked by gd->uart_clk.
6879 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
6880 Signed-off-by: Stefan Roese <sr@denx.de>
6882 commit 4b7e3d045cc82f7f7b6f3a19b54a814da36ac52c
6883 Author: Mike Frysinger <vapier@gentoo.org>
6884 Date: Tue Jan 13 11:00:29 2009 -0500
6886 Blackfin: move default boot SPI CS to common code
6888 Move the default SPI CS that we boot from into common code so that it can
6889 be used in other SPI drivers and environment settings.
6891 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6893 commit f790ef6ff12381cb0e43de54fb2b0f1204ad8ed6
6894 Author: Mike Frysinger <vapier@gentoo.org>
6895 Date: Wed Dec 10 12:33:54 2008 -0500
6897 Blackfin: dynamically update UART speed when initializing
6899 Previously, booting over the UART required the baud rate to be known ahead
6900 of time. Using a bit of tricky simple math, we can calculate the new board
6901 rate based on the old divisors.
6903 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6904 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
6906 commit 97f265f14f23050f3cb997f617f3a6917b843ea2
6907 Author: Mike Frysinger <vapier@gentoo.org>
6908 Date: Tue Dec 9 17:21:08 2008 -0500
6910 Blackfin: add support for fast SPI reads with Boot ROM
6912 Newer Blackfin boot roms support using the fast SPI read command rather than
6913 just the slow one. If the functionality is available, then use it.
6915 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6917 commit 67619982bfc5cd62710a48e3cbffc304cb78c341
6918 Author: Mike Frysinger <vapier@gentoo.org>
6919 Date: Sat Oct 11 21:46:52 2008 -0400
6921 Blackfin: check for reserved settings in DDR MMRs
6923 Some bits of the DDR MMRs should not be set. If they do, bad things may
6924 happen (like random failures or hardware destruction).
6926 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6928 commit 622a8dc0958dd599743348ea94eb10b9d0be8ae6
6929 Author: Mike Frysinger <vapier@gentoo.org>
6930 Date: Sat Oct 11 21:54:00 2008 -0400
6932 Blackfin: set default voltage levels for BF538/BF539 parts
6934 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6936 commit 09dc6b0bbd1d5e39cdddeebc059f9a75630e4f6f
6937 Author: Mike Frysinger <vapier@gentoo.org>
6938 Date: Sun Jun 1 01:29:57 2008 -0400
6940 Blackfin: use on-chip syscontrol() rom function when available
6942 Newer Blackfin's have an on-chip rom with a syscontrol() function that needs
6943 to be used to properly program the memory and voltage settings as it will
6944 include (possibly critical) factory tested bias values.
6946 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
6948 commit e1fb6d0d52fbe3fbc1a4c651dacf11e9c1417f63
6949 Author: Stefan Roese <sr@denx.de>
6950 Date: Thu Feb 5 11:44:52 2009 +0100
6952 cfi_flash: Fix typo in cfi_flash.c
6954 Patch "flash/cfi_flash: Use virtual sector start address, not phys"
6955 introduced a small typo and compilation warning for systems with CFI
6956 legacy support (e.g. hcu4). This patch fixes it.
6958 Signed-off-by: Stefan Roese <sr@denx.de>
6960 commit 28745db969b72693754991c838f68a7fb4a8b1ab
6961 Author: Stefan Roese <sr@denx.de>
6962 Date: Thu Jan 29 11:21:38 2009 +0100
6964 jedec_flash: Only use manufacturer defines from common flash.h
6966 This patch removes the double defined manufacturer defines from
6967 jedec_flash.c. Since the common defines in flash.h are 32bit
6968 we now need the (16) cast. This patch also removes the compilation
6969 warning (e.g. seen on hcu5):
6972 Configuring for hcu5 board...
6973 jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type
6975 Signed-off-by: Stefan Roese <sr@denx.de>
6977 commit ec21d5cfcb6b4e7fcdd5c6e926e1a824900706f2
6978 Author: Stefan Roese <sr@denx.de>
6979 Date: Thu Feb 5 11:25:57 2009 +0100
6981 cfi_flash: Silence compilation warning
6983 Patch "flash/cfi_flash: Use virtual sector start address, not phys"
6984 introduced a small compilation warning. This patch fixes it.
6986 Signed-off-by: Stefan Roese <sr@denx.de>
6988 commit 09ce9921a7d8b1ce764656b14b42217bbf4faa38
6989 Author: Becky Bruce <beckyb@kernel.crashing.org>
6990 Date: Mon Feb 2 16:34:51 2009 -0600
6992 flash/cfi_flash: Use virtual sector start address, not phys
6994 include/flash.h was commented to say that the address in
6995 flash_info->start was a physical address. However, from u-boot's
6996 point of view, and looking at most flash code, it makes more
6997 sense for this to be a virtual address. So I corrected the
6998 comment to indicate that this was a virtual address.
7000 The only flash driver that was actually treating the address
7001 as physical was the mtd/cfi_flash driver. However, this code
7002 was using it inconsistently as it actually directly dereferenced
7003 the "start" element, while it used map_physmem to get a
7004 virtual address in other places. I changed this driver so
7005 that the code which initializes the info->start field calls
7006 map_physmem to get a virtual address, eliminating the need for
7007 further map_physmem calls. The code is now consistent.
7009 The *only* place a physical address should be used is when defining the
7010 flash banks list that is used to initialize the flash_info struct,
7011 usually found in the board config file.
7013 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
7014 Signed-off-by: Stefan Roese <sr@denx.de>
7016 commit 657f2062d8e17ebf4a55f52c9e71c07c0c94c779
7017 Author: Wolfgang Denk <wd@denx.de>
7018 Date: Wed Feb 4 09:42:20 2009 +0100
7020 Fix compiler warning
7022 (shows up only when DEBUG is enabled)
7024 Signed-off-by: Wolfgang Denk <wd@denx.de>
7026 commit 47832cd15ae02fb6fde8ebed5b272f85775f2ceb
7027 Author: Mike Frysinger <vapier@gentoo.org>
7028 Date: Mon Oct 6 03:45:55 2008 -0400
7030 Blackfin: update anomaly lists
7032 Update the anomaly lists to match latest anomaly sheets.
7034 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7036 commit 70a4da45e16b72e8e5b0baaecdaee9be8619647d
7037 Author: Ralph Kondziella <rk@argos-messtechnik.de>
7038 Date: Mon Jan 26 12:34:36 2009 -0700
7040 ADS5121 Add PATA support
7042 Original patch from Ralph Kondziella
7043 plus clean up by Wolfgang Denk
7044 plus changes by John Rigby
7045 use ips clock not lpc
7046 port forward to current u-boot release
7048 Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de>
7049 Signed-off-by: Wolfgang Denk <wd@denx.de>
7050 Signed-off-by: John Rigby <jrigby@freescale.com>
7052 commit abfbd0ae4967df18102345db4f4b529a13da107b
7053 Author: Martha Marx <mmarx@silicontkx.com>
7054 Date: Mon Jan 26 10:45:07 2009 -0700
7056 ADS5121 Add IC Ident Module (IIM) support
7058 IIM (IC Identification Module) is the fusebox for the mpc5121.
7059 Use #define CONFIG_IIM to turn on the clock for this module
7060 use #define CONFIG_CMD_FUSE to add fusebox commands.
7061 Fusebox commands include the ability to read
7062 the status, read the register cache, override the register cache,
7063 program the fuses and sense them.
7065 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
7066 Signed-off-by: John Rigby <jrigby@freescale.com>
7068 commit 14d19cd1bce9a24b1335598f1568140f4950e4d9
7069 Author: John Rigby <jrigby@freescale.com>
7070 Date: Fri Jan 23 10:33:15 2009 -0700
7072 ADS5121 Fix rev2 silicon pci iopad config
7074 Reset config is not correct
7076 Signed-off-by: John Rigby <jrigby@freescale.com>
7078 commit 4c154252c480b13f69ce1b71a9530b0515da76a6
7079 Author: John Rigby <jrigby@freescale.com>
7080 Date: Wed Nov 19 13:57:34 2008 -0700
7082 ADS5121 DIU Add diu_bmp_addr env
7084 Add support for using a bmp other than
7085 FSL_Logo_BMP for the DIU splash screen.
7087 Can now set the env var "diu_bmp_addr" to
7088 the address of a BMP in flash to use instead
7089 of the default FSL_Logo_BMP.
7091 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
7092 Signed-off-by: John Rigby <jrigby@freescale.com>
7094 commit 92c20fbd3a7788c1a154f50a3f44f28a7763f99a
7095 Author: John Rigby <jrigby@freescale.com>
7096 Date: Thu Oct 30 16:39:35 2008 -0600
7098 ADS5121 DIU Make inclusion of FSL logo optional
7100 Make inclusion of FSL logo optional and
7101 turn it off by default.
7103 Signed-off-by: John Rigby <jrigby@freescale.com>
7105 commit bd99ec149abe94e7f6b2bda4766d701b4005053f
7106 Author: Remy Bohmer <linux@bohmer.net>
7107 Date: Sun Feb 1 12:27:53 2009 +0100
7109 Compile warning fix in onenand_uboot.h
7111 Regression since merge window after 2009.01
7113 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7115 commit a270d1e7295c3d829f42c0480117941dfc1c6477
7116 Author: Stefan Roese <sr@denx.de>
7117 Date: Thu Jan 29 06:33:55 2009 +0100
7119 USB: Add EHCI support for VCT EHCI controller (really with driver now)
7121 Somehow I missed the real driver part in my last patch version. This patch
7122 now adds the driver.
7124 Signed-off-by: Stefan Roese <sr@denx.de>
7125 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7127 commit 716ebf436c9e43df6740e0172f6b2a81ddbf1b8e
7128 Author: Cliff Cai <cliff.cai@analog.com>
7129 Date: Sat Nov 29 18:22:38 2008 -0500
7131 Blackfin: add driver for on-chip MMC/SD controller
7133 This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.
7135 Signed-off-by: Cliff Cai <cliff.cai@analog.com>
7136 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7138 commit 6e87ea0ca951465eba144ab2e6dba6fb507737a2
7139 Author: Mike Frysinger <vapier@gentoo.org>
7140 Date: Sat Oct 11 22:47:34 2008 -0400
7142 Blackfin: add port muxing for BF51x SPI
7144 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7146 commit fc68f9f85959664d528daea2aef5ef54974331ce
7147 Author: Mike Frysinger <vapier@gentoo.org>
7148 Date: Tue Jan 6 06:16:19 2009 -0500
7150 Blackfin: output booting source when booting
7152 Knowing the booting source of the part is useful, especially when the part
7153 can switch dynamically between sources.
7155 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7157 commit 8df3ce0f49c37947800ac7c84e751499882619fc
7158 Author: Mike Frysinger <vapier@gentoo.org>
7159 Date: Thu Dec 11 06:30:46 2008 -0500
7161 Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom
7163 Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by
7164 the Blackfin on-chip bootrom to boot out of SPI flash.
7166 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7168 commit 2b4a486e6fac502d8b883e344cc4012283945b3d
7169 Author: Mike Frysinger <vapier@gentoo.org>
7170 Date: Thu Dec 11 04:06:26 2008 -0500
7172 Blackfin: update asm-blackfin/posix_types.h to latest Linux version
7174 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7176 commit e5eb93e77391bcc308697116c544ea1340aaae8a
7177 Author: Mike Frysinger <vapier@gentoo.org>
7178 Date: Sat Dec 6 02:54:52 2008 -0500
7180 Blackfin: add port I bits
7182 Some people need to access port I, so make sure the pins are defined.
7184 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7186 commit 8a6b272596d43de0db4943eac7af58c3534c4026
7187 Author: Sonic Zhang <Sonic.Zhang@analog.com>
7188 Date: Wed Nov 26 22:16:45 2008 -0500
7190 Blackfin: add driver for on-chip ATAPI controller
7192 This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.
7194 Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
7195 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7197 commit be9d8c780e6831cb84b7d4590ceae03dca8fc10b
7198 Author: Mike Frysinger <vapier@gentoo.org>
7199 Date: Wed Nov 26 21:43:06 2008 -0500
7201 Blackfin: add driver for on-chip NAND controller
7203 This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.
7205 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7207 commit 4148e02abae9a099f4444b5e168ebc2b911d2295
7208 Author: Mike Frysinger <vapier@gentoo.org>
7209 Date: Wed Nov 12 07:18:15 2008 -0500
7211 Blackfin: build with -mno-fdpic
7213 Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build
7214 up u-boot, including ones that output FDPIC ELF by default.
7216 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7218 commit 70e95589a24a2d83ad00317e4a9611d0211ecb58
7219 Author: Mike Frysinger <vapier@gentoo.org>
7220 Date: Tue Nov 11 05:43:57 2008 -0500
7222 Blackfin: fix up EBIU defines
7224 The EBIU defines for EBSZ 256/512 were incorrect.
7226 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7228 commit 961954ea0ec8dc4341034c1a1ff3107ec0527809
7229 Author: Mike Frysinger <vapier@gentoo.org>
7230 Date: Wed Nov 5 12:45:24 2008 -0500
7232 Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
7234 Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
7235 as usable with the source/destination addresses and the count size.
7237 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7239 commit b93c68648426f906d63b98117496b6415f505f39
7240 Author: Mike Frysinger <vapier@gentoo.org>
7241 Date: Wed Nov 5 08:50:23 2008 -0500
7243 Blackfin: only flag L1 instruction for DMA memcpy
7245 The performance difference from doing an 8 bit DMA memcpy vs an optimized
7246 core memcpy can be pretty big when you add in the overhead of setting up the
7247 MDMA registers, cache flushes, etc... So only use dma_memcpy() when we
7248 actually require it.
7250 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7252 commit e347c092a3b3a2ce1e72f25f4829163634d09fbe
7253 Author: Mike Frysinger <vapier@gentoo.org>
7254 Date: Wed Nov 5 07:20:37 2008 -0500
7256 Blackfin: dma_memcpy(): fix random failures
7258 We have to make sure the DMA channel is actually disabled in hardware before
7259 attempting to reprogram it. Otherwise the new settings are ignored and we
7260 end up with random hangs/failures.
7262 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7264 commit fdce83c108846d6f0d5b1774e1cc29f2573a6ad3
7265 Author: Mike Frysinger <vapier@gentoo.org>
7266 Date: Tue Nov 4 00:04:03 2008 -0500
7268 Blackfin: rewrite cache handling functions
7270 Take the cache flush functions from the kernel as they use hardware loops in
7271 order to get optimal performance.
7273 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7275 commit 84c5f0dc47d17593fd81206614891bdc94f6d51c
7276 Author: Mike Frysinger <vapier@gentoo.org>
7277 Date: Mon Nov 3 22:30:05 2008 -0500
7279 Blackfin: setup bi_enetaddr for single nets
7281 For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
7282 based on $ethaddr, so set it up.
7284 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7286 commit 40599239e7875b39e2a5c12e6545992041c72c52
7287 Author: Mike Frysinger <vapier@gentoo.org>
7288 Date: Fri Oct 24 22:48:47 2008 -0400
7290 Blackfin: cache core/system clock values
7292 Calculating the clocks requires a bit of calls to gcc math functions, so
7293 cache the values after the first run since they'll most likely never
7294 change once U-Boot is up and running.
7296 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7298 commit 6957a6209b02f6b69607fc47425f13731cc477f1
7299 Author: Mike Frysinger <vapier@gentoo.org>
7300 Date: Fri Oct 24 18:18:16 2008 -0400
7302 Blackfin: enable --gc-sections
7304 Start building all Blackfin boards with -ffunction-sections/-fdata-sections
7305 and linking with --gc-sections.
7307 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7309 commit ee1d2001ea7fbabb2b9256026dc5468f057337f8
7310 Author: Mike Frysinger <vapier@gentoo.org>
7311 Date: Mon Oct 20 21:08:54 2008 -0400
7313 Blackfin: dont check baud if it wont actually get used
7315 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7317 commit 400f5778f375bc99c73c8488c555def261ccfab7
7318 Author: Mike Frysinger <vapier@gentoo.org>
7319 Date: Tue Oct 14 07:54:09 2008 -0400
7321 Blackfin: add driver for on-chip SPI controller
7323 This fills out the SPI backend for the Blackfin on-chip SPI peripheral.
7325 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7327 commit 7a1e87b1062e6eac0704c6fc2f7c661caf8814cd
7328 Author: Mike Frysinger <vapier@gentoo.org>
7329 Date: Sat Oct 18 05:33:51 2008 -0400
7331 Blackfin: only build post code when CONFIG_POST
7333 Save some time by using CONFIG_POST in the Makefile rather than C files.
7335 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7337 commit 6d7d4803c74bb86e1b401b1199e63381a62b9382
7338 Author: Mike Frysinger <vapier@gentoo.org>
7339 Date: Thu Jan 8 11:57:57 2009 -0500
7341 Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues
7343 Redo how pointers are managed to get rid of ugly casts and strict pointer
7344 aliasing issues that are highlighted by gcc 4.3.
7346 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7347 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7349 commit 092d2487baf7c29343c165e3ae82ea8a7f9e679b
7350 Author: Mike Frysinger <vapier@gentoo.org>
7351 Date: Tue Dec 9 17:46:21 2008 -0500
7353 Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII
7355 No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that
7356 does exactly the same thing as common "CONFIG_RMII".
7358 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7359 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7361 commit 8eed6ca51e50fade6887e8bdb1ff6a44116b42b5
7362 Author: Mike Frysinger <vapier@gentoo.org>
7363 Date: Wed Nov 5 06:36:15 2008 -0500
7365 Blackfin: bfin_mac: use common debug()
7367 Rather then defining our own DEBUGF(), just use the common debug().
7369 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7370 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7372 commit a7ec6ac8b2c6dce6fc670a2a855deb6eee340e04
7373 Author: Mike Frysinger <vapier@gentoo.org>
7374 Date: Mon Oct 20 13:59:51 2008 -0400
7376 Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}
7378 Rather than having the on-chip MAC hardcoded to phy address 1 and a speed
7379 of 2.5mhz, use these as defaults if the board doesn't specify otherwise.
7381 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7382 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7384 commit ac45af4e63ea925f4accc98453aab1a1166c196d
7385 Author: Mike Frysinger <vapier@gentoo.org>
7386 Date: Tue Oct 14 04:52:00 2008 -0400
7388 Blackfin: bfin_mac: cleanup MII/PHY functions
7390 Cleanup and rewrite the MII/PHY related functions so that we can reuse the
7391 existing common linux/miiphy.h code and hook into the `mii` command.
7393 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7394 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7396 commit 6b310a05f0d10c751f22468040932139f71c71d3
7397 Author: Mike Frysinger <vapier@gentoo.org>
7398 Date: Tue Oct 14 00:31:30 2008 -0400
7400 Blackfin: bfin_mac: set MDCDIV based on SCLK
7402 Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK),
7403 use the real algorithm so it gets set correctly regardless of SCLK.
7405 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7406 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7408 commit 930590f3e49c8f32256edf2e5861e1535a329c6c
7409 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7410 Date: Sat Jan 31 09:10:48 2009 +0100
7412 ixp: move serial to drivers/serial
7414 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7416 commit f90c8022f448bc5e93090e4b714368e52e912f0f
7417 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7418 Date: Sat Jan 31 09:04:58 2009 +0100
7420 ixp: move pci init in arm/board instead of cpu
7422 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7424 commit 8cb79b5f275f1888ccb278a2d2197140444a84b7
7425 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7426 Date: Sat Jan 31 08:56:49 2009 +0100
7428 ixp: move pci drivers to drivers/pci
7430 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7432 commit 012d5bab09a534e4800b02f50cf508e6837202ea
7433 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7434 Date: Sat Jan 31 08:53:44 2009 +0100
7436 ixp: Move conditional compilation to Makefile
7438 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7440 commit f693f501d67434df1f815fd1824a71973ae08207
7441 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7442 Date: Sat Jan 31 08:53:44 2009 +0100
7444 ixp: add missing os define
7446 need by arm-elf toolchains and no impact on the arm-linux one
7448 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7450 commit b4e2f89dfcb206a22d34fa6b34878d85b498b39f
7451 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7452 Date: Sat Jan 31 09:53:39 2009 +0100
7454 ixp: remove the option to include the Microcode
7456 instead the board will have to load it from flash or ram
7457 which will be specified by npe_ucode env var
7459 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7461 commit 1b017baf2071d8daf643bce87250db898c606c66
7462 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7463 Date: Fri Jan 30 09:45:23 2009 +0100
7465 ixp/npe: Move conditional compilation to Makefile
7467 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7469 commit 4e69087a1d6ef2eca6f46026cf5e7399b6c9e7c0
7470 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7471 Date: Wed Jan 28 21:58:04 2009 +0100
7473 SX1: add hardware V2 support
7475 In the V2 the 2 flash has been replace by one 32MB flash
7477 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7479 commit f877f2233dbcd7417c2f0babe6a849099b167f3c
7480 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7481 Date: Wed Jan 28 21:58:03 2009 +0100
7483 SX1: Fix second flash mapping
7485 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7487 commit 47fd3bffed6430c91eb2660f859574ed98be5bd8
7488 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7489 Date: Wed Jan 28 21:58:03 2009 +0100
7491 SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty
7493 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7495 commit cfca33837ec83829c6a49c3bcc86c31bc2495ff6
7496 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7497 Date: Wed Jan 28 21:57:59 2009 +0100
7499 move Samsung's board to board/samsung
7501 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7503 commit e4943ec57466ea5dfa085e7a9e0ec44cb93c4e1e
7504 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7505 Date: Thu Jan 29 12:07:21 2009 +0100
7507 move ARM Ltd. to vendor dir
7509 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7511 commit a87fb1b308a2a375cb9ca74ca0dd3e2c5793d3bf
7512 Author: Larry Johnson <lrj@acm.org>
7513 Date: Wed Jan 28 15:30:37 2009 -0500
7515 ppc4xx: Clean up configuration file for Korat board
7517 This patch updates the default environmental variables for the
7518 Korat PPC 440EPx board, and makes additional minor fixes.
7520 Signed-off-by: Larry Johnson <lrj@acm.org>
7521 Signed-off-by: Stefan Roese <sr@denx.de>
7523 commit f20405e31680efc36293c59b4963db57c9d93df4
7524 Author: Larry Johnson <lrj@acm.org>
7525 Date: Wed Jan 28 15:30:02 2009 -0500
7527 ppc4xx: Add variable "korat_usbcf" for Korat board
7529 The new environment variable "korat_usbcf" selects the USB
7530 port used by the Korat board's CompactFlash controller.
7532 Signed-off-by: Larry Johnson <lrj@acm.org>
7533 Signed-off-by: Stefan Roese <sr@denx.de>
7535 commit fc01ea1e27d5b124f0a1868d0ce569f156d58dfe
7536 Author: Gunnar Rangoy <gunnar@rangoy.com>
7537 Date: Fri Jan 23 12:56:31 2009 +0100
7539 AVR32: macb - Search for PHY id
7541 This patch adds support for searching through available PHY-addresses in
7542 the macb-driver. This is needed for the ATEVK1100 evaluation board,
7543 where the PHY-address will be initialized to either 1 or 7.
7545 This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
7546 enabled tells the driver to search for the PHY address.
7548 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
7549 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
7550 Signed-off-by: Olav Morken <olavmrk@gmail.com>
7551 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7553 commit af8626e0c08a780d9ded1d9c4883a89355f60e75
7554 Author: Olav Morken <olavmrk@gmail.com>
7555 Date: Fri Jan 23 12:56:26 2009 +0100
7557 Fix IP alignment problem
7559 This patch removes volatile from:
7560 volatile IP_t *ip = (IP_t *)xip;
7562 Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when
7563 using volatile, which causes an exception since xip isn't aligned on a word
7566 Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
7567 Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
7568 Signed-off-by: Olav Morken <olavmrk@gmail.com>
7569 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7571 commit 12a8b9db12f82a189ff143a58731007f5469da61
7572 Author: Ron Madrid <ron_madrid@sbcglobal.net>
7573 Date: Wed Jan 28 16:17:21 2009 -0800
7575 Marvell 88E1118 interrupt fix
7577 This patch adjusts the LED control so that interrupt lines are not reading LEDs
7578 and effectively causing indefinite interrupts to the controller.
7580 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
7581 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7583 commit 9a37f2acc31a3296dddd3574ea9eaf7f319807b9
7584 Author: Stefan Roese <sr@denx.de>
7585 Date: Wed Jan 21 17:14:26 2009 +0100
7587 net: smc911x.c: Add LAN9211 to chip_ids[] array
7589 Signed-off-by: Stefan Roese <sr@denx.de>
7590 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7592 commit 75edebe3011c963a7cd84be0f4a987477f2aaf89
7593 Author: Mike Frysinger <vapier@gentoo.org>
7594 Date: Tue Jan 27 16:53:39 2009 -0500
7596 Move is_valid_ether_addr() to include/net.h
7598 Import the is_valid_ether_addr() function from the Linux kernel.
7600 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7601 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7603 commit 268859338c0188eab1d0d3b867b7dad3c5cc734a
7604 Author: Michal Simek <monstr@monstr.eu>
7605 Date: Mon Jan 5 12:25:13 2009 +0100
7607 net: Sort Makefile labels
7609 Signed-off-by: Michal Simek <monstr@monstr.eu>
7610 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
7612 commit 1fbcbe9a95f39afb2df6ab8cba25b284b47ebfb2
7613 Author: Wolfgang Denk <wd@denx.de>
7614 Date: Wed Jan 28 23:06:42 2009 +0100
7616 85xx: Fix compile breakage with sbc8540 and sbc8560
7618 This fixes an error which raises just a warning:
7619 sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast
7621 Signed-off-by: Wolfgang Denk <wd@denx.de>
7623 commit 62625c0b081bd4019cecab14e9fc2e05e48d2a58
7624 Author: Mike Frysinger <vapier@gentoo.org>
7625 Date: Wed Jan 28 13:48:55 2009 -0500
7627 SPD823TS: do not define CONFIG_CMD_ENV
7629 Since the SPD823TS board does not actually have any writable flash to save
7630 its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is
7633 This fixes the build error:
7634 common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
7635 common/cmd_nvedit.c:557: undefined reference to `saveenv'
7636 make: *** [u-boot] Error 1
7638 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7640 commit 7379f45a7bc71941c3920c2f6b3c3faa4d7fd315
7641 Author: Dirk Behme <dirk.behme@googlemail.com>
7642 Date: Wed Jan 28 21:40:16 2009 +0100
7644 OMAP3: Add Zoom1 board support
7646 Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
7647 http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
7649 Signed-off-by: Nishanth Menon <nm@ti.com>
7650 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
7652 commit 2be2c6cc674e26237962f5cf4c0d311e139e4241
7653 Author: Dirk Behme <dirk.behme@googlemail.com>
7654 Date: Wed Jan 28 21:39:58 2009 +0100
7656 OMAP3: Add Pandora support
7658 Add Pandora support.
7660 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
7661 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
7662 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
7664 commit ad9bc8e52d174d699d1367be0b90089e4fdeb933
7665 Author: Dirk Behme <dirk.behme@googlemail.com>
7666 Date: Wed Jan 28 21:39:58 2009 +0100
7668 OMAP3: Add EVM board
7670 Add EVM board support.
7672 Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
7673 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
7674 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
7676 commit 9d0fc8110e7e755239329c26f300d5fc9946d3ec
7677 Author: Dirk Behme <dirk.behme@googlemail.com>
7678 Date: Wed Jan 28 21:39:57 2009 +0100
7680 OMAP3: Add Overo board
7682 Add Overo board support.
7684 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
7685 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
7686 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
7688 commit f904cdbb68167c647887f19929ad295dbaac8862
7689 Author: Dirk Behme <dirk.behme@googlemail.com>
7690 Date: Tue Jan 27 18:19:12 2009 +0100
7692 OMAP3: Add common power code, README, and BeagleBoard
7694 Add BeagleBoard support, common power code and README.
7696 Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
7697 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
7699 commit 9cda4f104b5313fadc21b75aa781c7a6aaf6ea60
7700 Author: Kumar Gala <galak@kernel.crashing.org>
7701 Date: Wed Jan 28 08:31:10 2009 -0600
7703 85xx: Fix compile breakage with MPC8540EVAL
7705 Configuring for MPC8540EVAL board...
7706 mpc8540eval.c: In function 'checkboard':
7707 mpc8540eval.c:53: error: invalid operands to binary /
7708 make[1]: *** [mpc8540eval.o] Error 1
7710 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7712 commit 1a448db77b10153703bc5e4ad13dd55d88beb1d6
7713 Author: Bryan Wu <bryan.wu@analog.com>
7714 Date: Sun Jan 18 23:04:27 2009 -0500
7716 usb_scan_devices: fix output with no devices
7718 We should check the return of usb_new_device() so that if no USB device is
7719 found, we print out the right message rather than always saying "new usb
7722 Signed-off-by: Bryan Wu <bryan.wu@analog.com>
7723 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7724 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7726 commit f1c1f540243438246aefb703fdcf16957e3a72e1
7727 Author: Stefan Roese <sr@denx.de>
7728 Date: Thu Jan 22 10:11:21 2009 +0100
7730 USB: Add high-speed (480Mb/s) to all USB related outputs
7732 With this patch the USB related connection speed output ("usb tree" command and
7733 debug output) is now high-speed enabled.
7735 This patch also fixes a compilation warning when debugging is enabled.
7737 Signed-off-by: Stefan Roese <sr@denx.de>
7738 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7740 commit daa2dafb450a8073a4e42fd46cd4e995b208e4cb
7741 Author: Stefan Roese <sr@denx.de>
7742 Date: Wed Jan 21 17:12:19 2009 +0100
7744 USB: Add dcache support to the EHCI driver
7746 This patch adds routines to handle (flush/invalidate) the dcache for the
7747 QH and qTD structures and data buffers. This is needed on platforms using
7748 this EHCI support with dcache enabled (like the MIPS VCT board port).
7750 Signed-off-by: Stefan Roese <sr@denx.de>
7751 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7753 commit 4e0ea0efc1e501186aca8577a4042fc6fa641602
7754 Author: Stefan Roese <sr@denx.de>
7755 Date: Wed Jan 21 17:12:28 2009 +0100
7757 USB: Add EHCI support for VCT EHCI controller
7759 Signed-off-by: Stefan Roese <sr@denx.de>
7760 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7762 commit 832e61418eedfea172bd2fdfd0ea0d199cc70a9d
7763 Author: Stefan Roese <sr@denx.de>
7764 Date: Wed Jan 21 17:12:10 2009 +0100
7766 USB: Add config option to call ehci_hcd_init() again after EHCI reset
7768 This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET
7769 to call ehci_hcd_init() again after ehci_reset() is executed. This
7770 is needed for the upcoming VCT EHCI support which needs to re-init
7771 the hcd part again after the EHCI CMD_RESET is executed.
7773 Signed-off-by: Stefan Roese <sr@denx.de>
7774 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7776 commit 597eb28bd9691266b7b804364cda577cdb51d106
7777 Author: Stefan Roese <sr@denx.de>
7778 Date: Wed Jan 21 17:12:01 2009 +0100
7780 USB: Fix speed detection on EHCI cntr with root hub transaction translators
7782 This patch fixes an issue that the speed of USB devices was not detected
7783 correctly on some EHCI controllers. This will be used on the upcoming VCT
7786 Signed-off-by: Stefan Roese <sr@denx.de>
7787 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7789 commit 20cc06611ea33fc0a67a5e56e6476379d2de3091
7790 Author: Thomas Abraham <t-abraham@ti.com>
7791 Date: Sun Jan 4 09:41:20 2009 +0530
7793 usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
7795 Enabling USB MSC support for DM6446 (TI DaVinci) platform in the
7798 Signed-off-by: Ravi Babu <ravibabu@ti.com>
7799 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
7800 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
7801 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
7802 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7804 commit 538ef967715322f64ee08efa2296d9682111b014
7805 Author: Thomas Abraham <t-abraham@ti.com>
7806 Date: Sun Jan 4 09:41:16 2009 +0530
7808 usb : musb : Enabling DM6446 (TI DaVinci) USB module power
7810 Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
7811 controller hook up to USB core layer.
7813 Signed-off-by: Ravi Babu <ravibabu@ti.com>
7814 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
7815 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
7816 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
7817 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7819 commit e142e9f35f8ec61e74bf8019428b003f5070c33b
7820 Author: Thomas Abraham <t-abraham@ti.com>
7821 Date: Sun Jan 4 09:41:13 2009 +0530
7823 usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
7825 Adding DM6446 (TI DaVinci) platform specific USB functionality for
7826 USB Phy and VBUS initialization.
7828 Signed-off-by: Ravi Babu <ravibabu@ti.com>
7829 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
7830 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
7831 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
7832 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7834 commit a9d39ebe91ecdd5ac0a0cf56ea162a19773db8da
7835 Author: Thomas Abraham <t-abraham@ti.com>
7836 Date: Sun Jan 4 09:41:09 2009 +0530
7838 usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
7840 Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
7843 Signed-off-by: Ravi Babu <ravibabu@ti.com>
7844 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
7845 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
7846 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
7847 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7849 commit a142896934c755e679ba87e227a8e449f39b0012
7850 Author: Thomas Abraham <t-abraham@ti.com>
7851 Date: Sun Jan 4 09:41:03 2009 +0530
7853 usb : musb : Adding host controller driver for Mentor USB controller
7855 Adding Mentor USB core functionality and Mentor USB Host controller
7856 functionality for Mentor USB OTG controller (musbhdrc).
7858 Signed-off-by: Ravi Babu <ravibabu@ti.com>
7859 Signed-off-by: Swaminathan S <swami.iyer@ti.com>
7860 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
7861 Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
7862 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7864 commit c7d703f3f3c3d6b020bda4cf633f8a6167c3cd2a
7865 Author: Mike Frysinger <vapier@gentoo.org>
7866 Date: Thu Jan 1 18:27:27 2009 -0500
7868 usb.h: use standard __LITTLE_ENDIAN from Linux headers
7870 Rather than forcing people to define a custom "LITTLEENDIAN", just use the
7871 __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
7874 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7875 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7877 commit 7b6e31eb17e3ff76238a60803fc531517d516223
7878 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
7879 Date: Wed Dec 31 10:33:56 2008 +0100
7881 USB ehci ixp4xx support
7883 Add USB ehci ixp4xx host controller. Test on ixdp465 board.
7885 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
7886 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7888 commit 1ed9f9adc88218841dfeb60b9094a5a548bff009
7889 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
7890 Date: Wed Dec 31 10:33:22 2008 +0100
7892 USB ehci remove infinite loop and use handshake function
7894 USB ehci code cleanup. Use handshake instead of infinite while loop
7895 to check the STD_ASS status
7897 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
7898 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7900 commit 8fea2914ac974029b65926ef8247d908f84d202d
7901 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
7902 Date: Wed Dec 31 10:32:41 2008 +0100
7904 Add initial support for USB ehci pci
7906 Add USB ehci pci support. This patch doesn't include any
7907 pci_ids and it is not tested on real hardware.
7909 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
7910 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7912 commit 14e4111cdab7e7738ff6a203d445e4d8377f058f
7913 Author: Bryan Wu <Bryan.Wu@analog.com>
7914 Date: Thu Jan 1 19:48:07 2009 -0500
7916 usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
7918 The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4
7919 does not like to be reset, so check for it.
7921 Signed-off-by: Bryan Wu <bryan.wu@analog.com>
7922 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
7923 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7925 commit 1eb734fed3b79a5e6106dad16e88041894fdab30
7926 Author: Thomas Abraham <t-abraham@ti.com>
7927 Date: Sun Jan 4 12:15:35 2009 +0530
7929 usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure
7931 This patch populates the 'priv' field of the USB keyboard device_t
7932 structure. The 'priv' field is populated with the address of the
7933 'struct usb_device' structure that represents the USB device.
7935 The 'priv' field can then be used in the 'usb_event_poll' function to
7936 determine the USB device that requires to be polled. An
7937 example of its usage in 'usb_event_poll' function is as below.
7940 struct usb_device *usb_kbd_dev;
7944 dev = device_get_by_name("usbkbd");
7945 usb_kbd_dev = (struct usb_device *)dev->priv;
7946 iface = &usb_kbd_dev->config.if_desc[0];
7948 Signed-off-by: Thomas Abraham <t-abraham@ti.com>
7949 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7951 commit 366523c26b6320af171459b19e6e0e9e3baa83ca
7952 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
7953 Date: Thu Dec 18 10:05:37 2008 +0100
7957 USB changes the speed according to the port status
7959 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
7960 Signed-off-by: Remy Bohmer <linux@bohmer.net>
7962 commit c0d722fe7ee1cb452dfd9246419188b3f6d9c4df
7963 Author: Remy Böhmer <linux@bohmer.net>
7964 Date: Sat Dec 13 22:51:58 2008 +0100
7966 EHCI fix code and ixp4xx test.
7967 USB ehci configuration parameter:
7969 #define CONFIG_CMD_USB 1
7970 #define CONFIG_USB_STORAGE 1
7971 #define CONFIG_USB_EHCI
7972 #define CONFIG_USB_EHCI_IXP4XX 1
7973 #define CONFIG_EHCI_IS_TDI 1
7974 #define CONFIG_EHCI_DESC_BIG_ENDIAN 1
7975 #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1
7976 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
7977 #define CONFIG_LEGACY_USB_INIT_SEQ 1
7979 2 USB Device(s) found
7980 scanning bus for storage devices... 0 Storage Device(s) found
7984 1 Hub (1.5MBit/s, 0mA)
7985 | u-boot EHCI Host Controller
7987 |+-2 Mass Storage (12MBit/s, 100mA)
7988 Sony Storage Media 0C07040930296
7992 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
7993 Signed-off-by: Remy Böhmer <linux@bohmer.net>
7995 commit 51ab142b8b546d5e627b2c8c36d0adae222565f7
7996 Author: michael <michael@panicking.retis>
7997 Date: Thu Dec 11 13:43:55 2008 +0100
7999 [PATCH] This patch add varius fix to the ehci.
8000 - fix ehci_readl, ehci_writel
8001 - introduce new define in ehci.h
8002 - introduce the handshake function for waiting on a register
8003 - fix usb_ehci_fsl with the new HC_LENGTH macro
8005 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8006 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8008 commit db63299b1dd2894ade542278210bccd046de6435
8009 Author: michael <michael@panicking.retis>
8010 Date: Wed Dec 10 17:55:19 2008 +0100
8012 [PATCH] Fix EHCI usb. I start to test on a
8013 IXP465 board and I find some errors in the code. This
8015 - descriptor initizialization (config, interface and endpoint
8016 must be one next-to the other when the USB_DT_CONFIG message
8018 - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN
8019 and the CONFIG_EHCI_MMIO_BIG_ENDIAN)
8020 - Introduce the linux version of the usb_config_descriptor and
8021 usb_interface descriptor. This descriptor does't contains
8024 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8025 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8027 commit 6b92487dcf9afe83a3570153d66940fdb293be76
8028 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8029 Date: Fri Nov 28 13:22:09 2008 +0100
8031 USB ehci freescale support
8033 Add USB ehci freescale support
8035 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8036 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8038 commit aaf098cfeed04595d4c5100ffd39095d79edbf90
8039 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8040 Date: Fri Nov 28 13:20:46 2008 +0100
8042 USB ehci core support
8044 Add USB ehci core support
8046 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8047 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8049 commit 3e126484df7868e341545cce740b24b62b0cd3b7
8050 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8051 Date: Fri Nov 28 13:19:19 2008 +0100
8053 Prepare USB layer for ehci
8055 Prepare USB layer for ehci support
8057 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8058 Signed-off-by: Remy Böhmer <linux@bohmer.net>
8060 commit a0cb3fc31e58996a1c5732715ac04159d4d284fd
8061 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
8062 Date: Wed Dec 10 15:52:06 2008 +0100
8064 USB storage cleanup patch
8068 Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
8069 Signed-off-by: Remy Bohmer <linux@bohmer.net>
8071 commit fe033ad6d0883063fe857237abb9436fab03208c
8072 Author: Mike Frysinger <vapier@gentoo.org>
8073 Date: Sun Oct 12 06:02:55 2008 -0400
8075 Blackfin: fixup misc warnings such as printf's and missing casts
8077 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8079 commit 1f4a3bb50343719c434d7e2541a2f86480a6d25c
8080 Author: Mike Frysinger <vapier@gentoo.org>
8081 Date: Sun Oct 12 22:09:26 2008 -0400
8083 Blackfin: convert old boards to use COBJS-y Makefile style
8085 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8087 commit 1f75d6f0ff005762d3e6ad92ae4ce2ab366b3bb5
8088 Author: Mike Frysinger <vapier@gentoo.org>
8089 Date: Sat Oct 11 22:38:37 2008 -0400
8091 Blackfin: bf533-stamp: rewrite resource swap logic
8093 The old swap function tended to clobber unrelated pins and screw up masks.
8094 Rewrite the thing from scratch so it only uses the resources it needs.
8096 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8098 commit 29d4ea0a9073c82469184331010136f52edf8db6
8099 Author: Mike Frysinger <vapier@gentoo.org>
8100 Date: Sat Oct 11 22:08:42 2008 -0400
8102 Blackfin: bootldr: implement BF53x/BF56x LDR loader
8104 The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of
8105 arbitrary memory locations, so implement a basic one in software.
8107 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8109 commit 8b35e3aeff6c2d747c37697997b3f8a808432329
8110 Author: Mike Frysinger <vapier@gentoo.org>
8111 Date: Sat Oct 11 22:05:42 2008 -0400
8113 Blackfin: implement real write support for OTP
8115 Now that real documentation has been released for the OTP interface and
8116 the on-chip ROM wrt writing/timings, implement support for reading/writing
8117 as well as dumping/locking.
8119 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8121 commit 9372c3214808fab545227d8d0f76b3bfcc6760ec
8122 Author: Mike Frysinger <vapier@gentoo.org>
8123 Date: Sat Oct 11 22:04:05 2008 -0400
8125 Blackfin: update on-chip ROM API
8127 This brings the API for the on-chip ROM in line with the toolchain and
8128 hardware documentation.
8130 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8132 commit 7633903bff432ec7b27905dce7396958553f2be6
8133 Author: Mike Frysinger <vapier@gentoo.org>
8134 Date: Sat Oct 11 21:52:17 2008 -0400
8136 Blackfin: allow serial console to be disabled
8138 Some devices have no UART device pulled out, so allow people to disable the
8139 driver completely in favor of other methods (like JTAG-console).
8141 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8143 commit 36ea8e9ad1107af12d244bba8c73e85b9f655e45
8144 Author: Mike Frysinger <vapier@gentoo.org>
8145 Date: Sat Oct 11 21:51:20 2008 -0400
8147 Blackfin: support console-over-JTAG
8149 The Blackfin JTAG has the ability to pass data via a back-channel without
8150 halting the processor. Utilize that channel to emulate a console.
8152 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8154 commit cf8f2efb5f39c5225da92391c14a07eecbeca881
8155 Author: Mike Frysinger <vapier@gentoo.org>
8156 Date: Sat Oct 11 21:49:06 2008 -0400
8158 Blackfin: handle new anomalies with reset
8160 Workaround fun new anomalies related to software reset of the processor.
8162 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8164 commit b1e9435b643043dd8fbd1fcc47309c6acb7b3c8e
8165 Author: Mike Frysinger <vapier@gentoo.org>
8166 Date: Sat Oct 11 21:44:00 2008 -0400
8168 Blackfin: pass RETX to Linux
8170 Make sure we save the value of RETX at power on and then pass it on to the
8171 kernel so that it can nicely debug a "double-fault-caused-a-reset" crash.
8173 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8175 commit b5eba3fafcccd1979380f12a256bd0e19be3d61e
8176 Author: Mike Frysinger <vapier@gentoo.org>
8177 Date: Sat Oct 11 21:40:26 2008 -0400
8179 Blackfin: clarify relocation comment during init
8181 People often ask questions about the init process and when things go
8182 from flash to relocated base, so clarify the comments a bit.
8184 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8186 commit 95433f6d43ede6b40c1d900f3f704c839aa074f1
8187 Author: Mike Frysinger <vapier@gentoo.org>
8188 Date: Sat Oct 11 21:23:41 2008 -0400
8190 Blackfin: just set SP register directly during init
8192 No need to set the SP register indirectly to the configured value when it
8193 can be set directly.
8195 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8197 commit 51230e6e356ccf4c932e0c4ff54f1e49da02285c
8198 Author: Mike Frysinger <vapier@gentoo.org>
8199 Date: Sat Oct 11 21:15:53 2008 -0400
8201 Blackfin: add portmuxing for UARTs on the BF51x
8203 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8205 commit 4f6a313240c531042f16909a3a170ab047b95779
8206 Author: Mike Frysinger <vapier@gentoo.org>
8207 Date: Sun Jun 1 01:26:29 2008 -0400
8209 Blackfin: respect CONFIG_CLKIN_HALF
8211 As pointed out by Ivan Koryakovskiy, the initialization code was not
8212 actually respecting the CONFIG_CLKIN_HALF option when configuring the
8215 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8217 commit dc2bfb0b58d7462b9eba68f3ae38e38cada0ad33
8218 Author: Mike Frysinger <vapier@gentoo.org>
8219 Date: Sun Jun 1 01:21:34 2008 -0400
8221 Blackfin: use common memcpy routine during init
8223 Rather than using a local custom memcpy function, just call the existing
8224 optimized Blackfin version.
8226 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8228 commit 362c943347364e9373af4c5530778491ab56ec2e
8229 Author: Mike Frysinger <vapier@gentoo.org>
8230 Date: Wed Apr 9 02:27:06 2008 -0400
8232 Blackfin: set default boot SPI CS for BF538/BF539
8234 The BF538/BF539 use CS2 for booting off of rather than CS1 like newer
8237 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8239 commit 74dde80bd5d55bc146630853ca191aaeea7c30f4
8240 Author: Mike Frysinger <vapier@gentoo.org>
8241 Date: Wed Apr 9 02:20:59 2008 -0400
8243 Blackfin: punt unused BF533-STAMP definitions
8245 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8247 commit fee531eeefc3b5f2c63c7fe27b9f55d924c59c26
8248 Author: Mike Frysinger <vapier@gentoo.org>
8249 Date: Fri Apr 18 20:44:11 2008 -0400
8251 Blackfin: resurrect BF533-STAMP video splash driver
8253 This video driver used to live in the Blackfin cpu directory, but it was
8254 lost during the unification process. This brings it back.
8256 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8258 commit a750d038f2548d846ea1e046d873dc932d041319
8259 Author: Mike Frysinger <vapier@gentoo.org>
8260 Date: Wed Apr 9 02:31:29 2008 -0400
8262 Blackfin: tighten up post memory coding style
8264 No functional changes here; just cleanup code style a bit.
8266 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8268 commit 0649908f92c9bd214dd139aa3d4698c1654a45c6
8269 Author: Mike Frysinger <vapier@gentoo.org>
8270 Date: Wed Apr 9 02:29:18 2008 -0400
8272 Blackfin: bf537-stamp nand: fix more style errors in previous commit
8274 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8276 commit 41f3325ae9add641036d7cb362e884b698e53f07
8277 Author: Mike Frysinger <vapier@gentoo.org>
8278 Date: Sat Oct 11 20:31:17 2008 -0400
8280 Blackfin: drop dead/wrong debug code in initdram()
8282 The DEBUG code in initdram() is quite old and was never really useful, so
8283 just drop it altogether. Common Blackfin debug code does a better job.
8285 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8287 commit 65ba1abd3b90e0b2585745809b78e2651bd3bacb
8288 Author: Mike Frysinger <vapier@gentoo.org>
8289 Date: Sat Oct 11 20:30:28 2008 -0400
8291 Blackfin: bf533-ezkit: shuffle flash defines a little
8293 Some of the flash defines weren't in the correct location and caused build
8294 problems in some configurations, so let's move types and defines to better
8297 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8299 commit be853bf86b41e91f4c422f0f56fdf87ea3191266
8300 Author: Mike Frysinger <vapier@gentoo.org>
8301 Date: Mon Oct 6 04:16:47 2008 -0400
8303 Blackfin: overhaul i2c driver
8305 The current Blackfin i2c driver does not work properly with certain devices
8306 due to it breaking up transfers incorrectly. This is a rewrite of the
8307 driver and relocates it to the newer place in the source tree.
8309 Also remove duplicated I2C speed defines in Blackfin board configs and
8310 disable I2C slave address usage since it isn't implemented.
8312 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8314 commit b6edc719a106ab7fa6e6950b4d97bc39c1368e45
8315 Author: Mike Frysinger <vapier@gentoo.org>
8316 Date: Mon Oct 6 04:00:07 2008 -0400
8318 Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
8320 Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of
8321 128kB when setting up the default flash protection region for U-Boot
8324 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8326 commit 78a0ba7dc24c9682371f6ee8549b569fb573a329
8327 Author: Mike Frysinger <vapier@gentoo.org>
8328 Date: Mon Oct 6 03:57:39 2008 -0400
8330 Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
8332 When setting up the global data, rather than relying on sizeof(), use the
8333 common CONFIG_SYS_GBL_DATA_SIZE define.
8335 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8337 commit 01815c2d06c5b838f2cd536703e47bd2c9148194
8338 Author: Mike Frysinger <vapier@gentoo.org>
8339 Date: Mon Oct 6 03:52:24 2008 -0400
8341 Blackfin: implement general support for CONFIG_STATUS_LED
8343 Here are the Blackfin-specific and board-independent pieces for status leds.
8345 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8347 commit 6882b5a79a3247494b62c05015fa672557f1bfaa
8348 Author: Mike Frysinger <vapier@gentoo.org>
8349 Date: Mon Oct 6 03:49:32 2008 -0400
8351 Blackfin: do not init i2c in Blackfin board init
8353 The common code takes care of calling i2c_init() when needed, so no point
8354 in us doing it as well.
8356 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8358 commit 1118ea73698eee6e72ef5cbfc00e41746040304f
8359 Author: Mike Frysinger <vapier@gentoo.org>
8360 Date: Mon Oct 6 03:42:20 2008 -0400
8362 Blackfin: bfin_mac: update port muxing
8364 Adds support more Blackfin parts and fixes broken muxing for older ones.
8366 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8368 commit 05b75e48832fc4afeecf8e76d704349557dffa35
8369 Author: Mike Frysinger <vapier@gentoo.org>
8370 Date: Mon Oct 6 03:35:44 2008 -0400
8372 Blackfin: fix dcache handling when doing dma memcpy's
8374 Our dcache invalidate function doesn't just invalidate, it also flushes.
8375 So rename the function accordingly and fix the dma_memcpy() function so it
8376 doesn't inadvertently corrupt the data destination.
8378 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8380 commit 68e5632494168095d75f120af70043b68afd2476
8381 Author: Mike Frysinger <vapier@gentoo.org>
8382 Date: Thu Aug 7 18:56:56 2008 -0400
8384 Blackfin: dont generate ldrs with --force
8386 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8388 commit 746290dfd86a70b41fc5fdd3df1424a647d5c5e8
8389 Author: Mike Frysinger <vapier@gentoo.org>
8390 Date: Thu Aug 7 18:55:30 2008 -0400
8392 Blackfin: pass --bmode/--initcode when creating ldr
8394 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8396 commit 0332e4df71fccf9a96c5a4393e3c5d5daa50880a
8397 Author: Mike Frysinger <vapier@gentoo.org>
8398 Date: Thu Aug 7 18:39:27 2008 -0400
8400 Blackfin: minimize time cache is turned off when replacing cplb entries
8402 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8404 commit 21d631360430cf0ae9099612273cd4de28911ba9
8405 Author: Mike Frysinger <vapier@gentoo.org>
8406 Date: Thu Aug 7 15:31:13 2008 -0400
8408 Blackfin: split cache handling out of dma_memcpy()
8410 Creating a new dma_memcpy() function that skips all cache checks allows us
8411 to use the function in very early init where the cache is not yet setup.
8413 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8415 commit d31eb38512bed377d5d4b3c696662e52120a2e4c
8416 Author: Mike Frysinger <vapier@gentoo.org>
8417 Date: Thu Aug 7 15:30:49 2008 -0400
8419 Blackfin: abort dma_memcpy() for L1 scratchpad
8421 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8423 commit 81b799add709177e838466461f7b9989488b0fd5
8424 Author: Mike Frysinger <vapier@gentoo.org>
8425 Date: Thu Aug 7 15:27:52 2008 -0400
8427 Blackfin: rename bootm.c to boot.c
8429 The boot file contains functions for more than just "bootm", so rename it
8432 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8434 commit d7ca7dd5bfc418ac173e9d2712f6cc2d8147a091
8435 Author: Mike Frysinger <vapier@gentoo.org>
8436 Date: Thu Aug 7 13:22:37 2008 -0400
8438 Blackfin: set more sane default board config values
8440 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8442 commit 36cd52a00794fb15ffab05d640acca92d7482993
8443 Author: Mike Frysinger <vapier@gentoo.org>
8444 Date: Thu Aug 7 15:24:59 2008 -0400
8446 Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
8448 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8450 commit c8054bc12e00669bd7588f2b30fef48aa94babac
8451 Author: Mike Frysinger <vapier@gentoo.org>
8452 Date: Thu Aug 7 13:21:27 2008 -0400
8454 Blackfin: add bit defines for DDR parts
8456 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8458 commit 154502fe0796f3b7a4698378c5d2080ae28a9782
8459 Author: Mike Frysinger <vapier@gentoo.org>
8460 Date: Thu Aug 7 13:21:11 2008 -0400
8462 Blackfin: add defines to describe active bootrom behavior
8464 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8466 commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2
8467 Author: Kim Phillips <kim.phillips@freescale.com>
8468 Date: Tue Jan 27 16:03:53 2009 -0600
8470 mpc83xx: fix undefined reference to `flush_cache' error in simpc8313 build
8472 extend commit c70564e6b1bd08f3230182392238907f3531a87e
8473 "NAND: Fix cache and memory inconsistency issue" to add the cache.o dependency
8474 to the simpc8313 build and fix this:
8476 ...Large Page NAND...Configuring for SIMPC8313 board...
8477 nand_boot_fsl_elbc.o: In function `nand_boot':
8478 nand_spl/board/sheldon/simpc8313/nand_boot_fsl_elbc.c:150: undefined reference to `flush_cache'
8479 make[1]: *** [/home/r1aaha/git/u-boot-mpc83xx/nand_spl/u-boot-spl] Error 1
8480 make: *** [nand_spl] Error 2
8482 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8484 commit 54a7cc4912feefa45be961cc47cc159563725d2f
8485 Author: Wolfgang Denk <wd@denx.de>
8486 Date: Wed Jan 28 09:25:31 2009 +0100
8488 mpc8536ds.c: include sata.h to for needed function prototypes
8490 Signed-off-by: Wolfgang Denk <wd@denx.de>
8492 commit 2fb2604d5c20beb061b0a94282b7f6eb14d00cb8
8493 Author: Peter Tyser <ptyser@xes-inc.com>
8494 Date: Tue Jan 27 18:03:12 2009 -0600
8496 Command usage cleanup
8498 Remove command name from all command "usage" fields and update
8499 common/command.c to display "name - usage" instead of
8500 just "usage". Also remove newlines from command usage fields.
8502 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
8504 commit 79621bc10ba8b8c45d348994aba5b9e4923cb77b
8505 Author: Peter Tyser <ptyser@xes-inc.com>
8506 Date: Tue Jan 27 18:03:11 2009 -0600
8508 amcc: Clean up command usage output
8510 Update taihu and taishan commands to use cmd_usage() function
8511 to display usage messages.
8513 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
8515 commit 62c3ae7c6ef215b1afa614abdf61acf077752207
8516 Author: Peter Tyser <ptyser@xes-inc.com>
8517 Date: Tue Jan 27 18:03:10 2009 -0600
8519 Standardize command usage messages with cmd_usage()
8521 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
8523 commit 84cde2bb409c07c6ef36a192d194359d4e9ccd70
8524 Author: Peter Tyser <ptyser@xes-inc.com>
8525 Date: Tue Jan 27 18:03:09 2009 -0600
8527 pcs440ep: Clean up led command definition
8529 The pcs440ep's led command usage formatting is non-standard. It
8530 was made standard in preparation for larger command usage updates.
8532 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
8534 commit 9507e7867e04dc48c80ee333c2a9a5e70e887f62
8535 Author: Peter Tyser <ptyser@xes-inc.com>
8536 Date: Tue Jan 27 18:03:08 2009 -0600
8538 Clean up diufb command definitions
8540 The diufb command usage formatting is non-standard. It was
8541 made standard in preparation for larger command usage updates.
8543 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
8545 commit 6450a8485836fc80615ae6de6a864c33369b44f5
8546 Author: Wolfgang Denk <wd@denx.de>
8547 Date: Wed Jan 28 00:29:26 2009 +0100
8549 Update CHANGELOG, tiny coding style cleanup.
8551 Signed-off-by: Wolfgang Denk <wd@denx.de>
8553 commit cf7e399fb35b3aea90a27d1df72f45f5d6156204
8554 Author: Mike Frysinger <vapier@gentoo.org>
8555 Date: Tue Jan 27 16:12:21 2009 -0500
8557 SATA: do not auto-initialize during boot
8559 Rather than have the board code initialize SATA automatically during boot,
8560 make the user manually run "sata init". This brings the SATA subsystem in
8561 line with common U-Boot policy.
8563 Rather than having a dedicated weak function "is_sata_supported", people
8564 can override sata_initialize() to do their weird board stuff. Then they
8565 can call the actual __sata_initialize().
8567 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8569 commit 50970839712dda35399e2fa83fe818df9354d618
8570 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
8571 Date: Mon Jan 26 08:45:14 2009 -0500
8573 part_efi: Fix partition size calculation due to inclusive ending LBA.
8575 The ending LBA is inclusive. Hence, the partition size should be
8576 ((ending-LBA + 1) - starting-LBA) to get the proper partition size.
8578 This is confirmed against the results from the parted tool.
8579 (e.g. use parted /dev/sda -s unit S print) and observe the size.
8581 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
8583 commit b5b004ad8a0ac6f98bd5708ec8b22fbddd1c1042
8584 Author: Tomasz Figa <tomasz.figa@gmail.com>
8585 Date: Tue Dec 30 18:35:57 2008 +0100
8587 jffs2: Fix zero sector_size when not using CONFIG_JFFS2_CMDLINE
8589 This patch fixes a bug (?) introduced after inclusion of the new
8592 When not using CONFIG_JFFS2_CMDLINE, the code in cmd_jffs2.c doesn't
8593 fill in part->sector_size (keeping it as 0), but a correct value is
8594 needed by the code in jffs2_1pass.c. This causes all JFFS2 accesses
8595 to be in the same place of the memory, what obviously means
8596 impossibility to use the JFFS2 partition.
8598 This problem is fixed in this patch by including sector size
8599 calculation in non-CONFIG_JFFS2_CMDLINE mtdparts_init variant.
8601 Signed-off-by: Tomasz Figa <tomasz.figa_at_gmail.com>
8603 commit ba69dc26a5fd606da49573bb2f15e756a34f3f98
8604 Author: Mike Frysinger <vapier@gentoo.org>
8605 Date: Tue Dec 30 02:59:25 2008 -0500
8607 saveenv: standardize enablement
8609 Rather than special casing each environment type for enabling the saveenv
8610 command, have them all behave the same. This avoids bitrot as new env
8611 sources are added/removed.
8613 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
8615 commit 2ac6985a7466a1c8a7aa8b2fa24d360925a82764
8616 Author: Andrew Dyer <adyer@righthandtech.com>
8617 Date: Mon Dec 29 17:36:01 2008 -0600
8619 soft_i2c.c add option for repeated start in i2c_read()
8621 This patch adds a #define to optionally change the behaviour of
8622 i2c_read() in soft_i2c.c to send an I2C repeated start instead of a
8623 stop-start between sending the device address pointer write and
8624 reading back the data. The current behaviour is retained as the
8627 While most devices will work either way, I have a smart battery(*)
8628 that requires repeated start, and someone at some point found a
8629 device that required a stop-start.
8631 (*) http://www.inspired-energy.com/Standard_Products/NL2054/NL2054%20Rev1.0%20Data%20Sheet.pdf
8633 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
8635 commit 3429071700963ca2f944c51d695a7481af0cee33
8636 Author: Wolfgang Denk <wd@denx.de>
8637 Date: Tue Jan 27 22:07:14 2009 +0100
8639 {delta,zylonite}/lowlevel_init.S: fix typo
8641 Commit 9d803d8c mistakenly changed some constants
8642 from 0x300 into 300 - this patch fixes it.
8644 Pointed out by Tom Evans <tom@ceos.com.au>, see
8645 http://article.gmane.org/gmane.comp.boot-loaders.u-boot/51992 for
8648 Signed-off-by: Wolfgang Denk <wd@denx.de>
8650 commit 1bc434373013af241835c14011ac3f291dccbf53
8651 Author: Stefan Althoefer <stefan.althoefer@web.de>
8652 Date: Sat Dec 20 19:40:41 2008 +0100
8654 drivers/net/e1000.c: missing terminator for supported devices
8656 Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
8658 commit 65f7d41031a70b1649b35020995c505edca91533
8659 Author: Wolfgang Denk <wd@denx.de>
8660 Date: Tue Jan 27 21:36:28 2009 +0100
8662 fat.c: fix warning: array subscript is above array bounds
8664 Fix based on suggestion by David Hawkins <dwh@ovro.caltech.edu>.
8666 Signed-off-by: Wolfgang Denk <wd@denx.de>
8668 commit 107b801cf3fe39612d69d70581ebc3bf5e215554
8669 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8670 Date: Fri Jan 2 15:11:41 2009 +0100
8672 Fix gunzip in case of insufficient output buffer
8674 U-Boot's gunzip() function does not handle the return code
8675 of zlib's inflate() function correctly. gunzip() is implemented
8676 to uncompress all input data in one run. So the correct return
8677 code for the good case is Z_STREAM_END. In case of insufficient
8678 output buffer memory inflate returns Z_OK. For gunzip() this
8681 It also makes sense to me to call inflateEnd() also in case
8684 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8686 commit 2a61eff6a82f0d6e2335d968799b3fbeb3ff4d8e
8687 Author: Stefan Roese <sr@denx.de>
8688 Date: Wed Jan 21 17:25:01 2009 +0100
8690 MIPS: Add VCT board series support (Part 3/3)
8692 Signed-off-by: Stefan Roese <sr@denx.de>
8694 commit ae691e5719c48f1d2826cb72722497d1d162765b
8695 Author: Stefan Roese <sr@denx.de>
8696 Date: Wed Jan 21 17:24:49 2009 +0100
8698 MIPS: Add VCT board series support (Part 2/3)
8700 Signed-off-by: Stefan Roese <sr@denx.de>
8702 commit 50752790bc9285c0c1c5235e88f3a4ef2eec1e72
8703 Author: Stefan Roese <sr@denx.de>
8704 Date: Wed Jan 21 17:24:39 2009 +0100
8706 MIPS: Add VCT board series support (Part 1/3)
8708 Signed-off-by: Stefan Roese <sr@denx.de>
8710 commit 03d3bfb00806b5441f1871c7408c1749863e0fdc
8711 Author: Stefan Roese <sr@denx.de>
8712 Date: Wed Jan 21 17:20:20 2009 +0100
8714 MIPS: Add flush_dcache_range() and invalidate_dcache_range()
8716 This patch adds flush_/invalidate_dcache_range() to the MIPS architecture.
8717 Those functions are needed for the upcoming dcache support for the USB
8718 EHCI driver. I chose this API because those cache handling functions are
8719 already present in the PPC architecture.
8721 Signed-off-by: Stefan Roese <sr@denx.de>
8722 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8724 commit de832a99414ff06a4b2cdc9f5280b387da039834
8725 Author: Stefan Roese <sr@denx.de>
8726 Date: Mon Jan 26 10:05:20 2009 +0100
8728 nand_spl: Fix compile problem with board_nand_init() prototype
8730 This patch removes the now obsolete and additionally wrongly defined
8731 board_nand_init() prototype from nand_spl/nand_boot.c.
8733 Signed-off-by: Stefan Roese <sr@denx.de>
8734 Signed-off-by: Scott Wood <scottwood@freescale.com>
8736 commit e8eac437189430d8e04a5d254ed92c58bc534a79
8737 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
8738 Date: Wed Jan 14 08:44:26 2009 -0500
8740 CFI: Add geometry reversal for STMicro M29W320ET
8742 Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.
8744 Modeled after flash_fixup_amd, this patch handles the geometry reversal
8745 or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
8746 Since I cannot test all STM's chips, the detection is implemented as
8747 narrow as possible for now.
8749 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
8750 Signed-off-by: Stefan Roese <sr@denx.de>
8752 commit 0f8e851e897b535959a0781171910cd97f33c30c
8753 Author: Jens Gehrlein <sew_s@tqs.de>
8754 Date: Tue Dec 16 17:25:55 2008 +0100
8756 CFI: increase performance of function find_sector()
8758 Tested on TQM5200S-BD with Samsung K8P2815UQB
8760 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
8761 Signed-off-by: Stefan Roese <sr@denx.de>
8763 commit a7292871a79cc48d98e3a708dd3c3b81580db6ef
8764 Author: Jens Gehrlein <sew_s@tqs.de>
8765 Date: Tue Dec 16 17:25:54 2008 +0100
8767 CFI: avoid redundant function call in single word programming mode
8769 The function find_sector() doesn't need to be called twice in
8770 the case of AMD command set.
8771 Tested on TQM5200S-BD with Samsung K8P2815UQB.
8773 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
8774 Signed-off-by: Stefan Roese <sr@denx.de>
8776 commit c8901f46a71ec16e084e604596a09e23bfb0f6ac
8777 Author: Stefan Roese <sr@denx.de>
8778 Date: Mon Jan 26 10:15:23 2009 +0100
8780 ppc4xx: Remove compilation warning in gdppc440etc.c
8782 Signed-off-by: Stefan Roese <sr@denx.de>
8784 commit 91f33534728e6416d332ad2b53ad1d6fde57f7fc
8785 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8786 Date: Fri Jan 2 12:19:47 2009 +0100
8788 ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
8790 Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59.
8791 Either they define or undef it. Because it's not used in any source
8792 files this patch removes any references to it.
8794 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
8795 Signed-off-by: Stefan Roese <sr@denx.de>
8797 commit 89b8619aaeafc922ca0c3bb249872591050c8dcc
8798 Author: Dirk Eibach <eibach@gdsys.de>
8799 Date: Tue Dec 9 13:12:40 2008 +0100
8801 ppc4xx: Add GDsys PowerPC 440 ETX board support.
8803 Board support for the Guntermann & Drunck PowerPC 440 ETX module.
8804 Based on the AMCC Yosemite board support by Stefan Roese.
8806 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
8807 Signed-off-by: Stefan Roese <sr@denx.de>
8809 commit 3943d2ff6cc40dd601a9feeb39eb6d3d5090ea6d
8810 Author: Dirk Eibach <eibach@gdsys.de>
8811 Date: Tue Dec 9 11:00:07 2008 +0100
8813 ppc4xx: Improve DDR autodetect
8815 Added support for a second memory bank to DDR autodetection for 440
8817 Made hardcoded values configurable.
8819 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
8820 Signed-off-by: Stefan Roese <sr@denx.de>
8822 commit 71a040f4f556cca4d30f06805d82e717b3ef1020
8823 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8824 Date: Fri Nov 21 12:06:26 2008 +0900
8826 sh: sh7763rdp: Update sh7763rdp config
8828 Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.
8830 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8831 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8833 commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56
8834 Author: Gary Jennejohn <garyj@denx.de>
8835 Date: Thu Nov 20 12:28:38 2008 +0100
8837 mgcoge make ether_scc.c work with CONFIG_NET_MULTI
8839 This change is needed for mgcoge because it uses two ethernet drivers.
8841 Add a check for the presence of the PIGGY board on mgcoge. Without this
8842 board networking cannot work and the initialization must be aborted.
8844 Only allocate rtx once to prevent DPRAM exhaustion.
8846 Initialize ether_scc.c and the keymile-specific HDLC driver (to be added
8849 Signed-off-by: Gary Jennejohn <garyj@denx.de>
8850 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8852 commit bd3980cc095af1728b994cdd8bf1ac430b6289e6
8853 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8854 Date: Fri Nov 21 12:04:18 2008 +0900
8856 sh: sh_eth: Change new network API
8858 sh_eth used old network API. This patch changed new API.
8860 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8861 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8863 commit 890a02e8ee6b8c26a6e3e505e1a2d29cd73aa6f6
8864 Author: Stefan Roese <sr@denx.de>
8865 Date: Wed Nov 12 13:31:02 2008 +0100
8867 net: smc911x: Make register read/write functions weak
8869 This patch changes the reg_read/_write to smc911x_reg_read/_write
8870 and defines then as weak so that they can be overridden by board
8873 This will be used by the upcoming VCTH board support.
8875 Signed-off-by: Stefan Roese <sr@denx.de>
8876 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8878 commit 8b69b563039989885969d24465c56f8ac4c07c4c
8879 Author: Heiko Schocher <hs@denx.de>
8880 Date: Thu Nov 20 09:57:14 2008 +0100
8882 powerpc: net: support for the SMSC LAN8700 PHY
8884 Signed-off-by: Heiko Schocher <hs@denx.de>
8885 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8887 commit d5254f149da9e6cd649d887b042ce577ef3ba78d
8888 Author: Alessandro Rubini <rubini@unipv.it>
8889 Date: Sat Jan 24 18:10:37 2009 +0100
8891 Initial support for Nomadik 8815 development board
8893 The NMDK8815 board is distributed by ST Microelectornics.
8894 Other (proprietary) code must be run to unlock the CPU before
8895 U-Boot runs. doc/README.nmdk8815 outlines the boot sequence.
8897 This is the initial port, with basic infrastructure and
8898 a working serial port.
8900 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
8901 Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
8902 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8904 commit 7d264c1ef267cfc8d928bc8577a7cc907f2f5e47
8905 Author: Dirk Behme <dirk.behme@googlemail.com>
8906 Date: Sun Dec 14 09:47:18 2008 +0100
8908 OMAP3: Add I2C support
8912 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8914 commit b1c3bf99fb477675d464aeadb5dd69d2cbc9dc7b
8915 Author: Dirk Behme <dirk.behme@googlemail.com>
8916 Date: Sun Dec 14 09:47:17 2008 +0100
8918 OMAP3: Add MMC support
8922 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8924 commit 12201a13547ec22ddcdae278e74465e54a3be60c
8925 Author: Dirk Behme <dirk.behme@googlemail.com>
8926 Date: Sun Dec 14 09:47:16 2008 +0100
8928 OMAP3: Add NAND support
8932 Signed-off-by: Nishanth Menon <nm@ti.com>
8933 Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
8934 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8936 commit 91eee546737ae21d930af479530997174c342b13
8937 Author: Dirk Behme <dirk.behme@googlemail.com>
8938 Date: Sun Dec 14 09:47:15 2008 +0100
8940 OMAP3: Add common board, interrupt and system info
8942 Add common board, interrupt and system info code.
8944 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8946 commit 5ed3e8659e5373f6a229877ac506c0b00a054fb8
8947 Author: Dirk Behme <dirk.behme@googlemail.com>
8948 Date: Sun Dec 14 09:47:14 2008 +0100
8950 OMAP3: Add common clock, memory and low level code
8952 Add common clock, memory and low level code
8954 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8956 commit 0b02b184003e6a5023e05d5f31de54db279b1431
8957 Author: Dirk Behme <dirk.behme@googlemail.com>
8958 Date: Sun Dec 14 09:47:13 2008 +0100
8960 OMAP3: Add common cpu and start code
8962 Add common cpu and start code.
8964 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8966 commit a8b6450546cd507d331b8fde384791d84bde5651
8967 Author: Dirk Behme <dirk.behme@googlemail.com>
8968 Date: Sun Dec 14 09:47:12 2008 +0100
8970 OMAP3: Add OMAP3, memory and function prototype headers
8972 Add OMAP3, memory and function prototype header files for OMAP3.
8974 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8976 commit 2c803210a464abbac35752ca1c737514360b4c32
8977 Author: Dirk Behme <dirk.behme@googlemail.com>
8978 Date: Sun Dec 14 09:47:11 2008 +0100
8980 OMAP3: Add pin mux, clock and cpu headers
8982 Add pin mux, clock and cpu header files for OMAP3.
8984 Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
8986 commit 685533646f4ff17a84ec9265cabb60af325b6e1f
8987 Author: Maxim Artamonov <scn1874@yandex.ru>
8988 Date: Wed Dec 3 05:38:17 2008 +0300
8990 bugfix for i.mx31 CCM_UPCTL reg
8992 Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru>
8994 commit 24113a44ed5cd3257a0237c3961e121812fca6db
8995 Author: Mike Frysinger <vapier@gentoo.org>
8996 Date: Tue Dec 30 03:15:38 2008 -0500
8998 easylogo: add optional gzip support
9000 Some images can be quite large, so add an option to compress the
9001 image data with gzip in the U-Boot image. Then at runtime, the
9002 board can decompress it with the normal zlib functions.
9004 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9006 commit 7e4b9b4f6f43838fad3ad72c029a3d7fc7c7d48c
9007 Author: Bryan Wu <bryan.wu@analog.com>
9008 Date: Fri Jan 2 20:47:45 2009 -0500
9010 fat: fix unaligned errors
9012 A couple of buffers in the fat code are declared as an array of bytes.
9013 But it is then cast up to a structure with 16bit and 32bit members.
9014 Since GCC assumes structure alignment here, we have to force the
9015 buffers to be aligned according to the structure usage.
9017 Signed-off-by: Bryan Wu <bryan.wu@analog.com>
9018 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9020 commit 68f8718df2ed4c2f43031407ccf6cfa81125dddc
9021 Author: Brad Bozarth <bflinux@yumbrad.com>
9022 Date: Thu Jan 1 22:45:47 2009 -0500
9024 spi flash: fix crash due to spi flash miscommunication
9026 Higher spi flash layers expect to be given back a pointer that was
9027 malloced so that it can free the result, but the lower layers return
9028 a pointer that is in the middle of the malloced memory. Reorder the
9029 members of the lower spi structures so that things work out.
9031 Signed-off-by: Brad Bozarth <bflinux@yumbrad.com>
9032 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9033 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9035 commit ce82ff05388b5ddafdf6082ef0776cce72c40b1c
9036 Author: Yuri Tikhonov <yur@emcraft.com>
9037 Date: Sat Dec 20 14:54:21 2008 +0300
9039 FPU POST: fix warnings when building with 2.18 binutils
9041 When compile u-boot with the 2.18 binutils the following
9042 warning messages for each object file in post/lib_ppc/fpu/ is
9043 produced at the linking stage:
9045 post/libpost.a(acc1.o) uses hard float, u-boot uses soft-float
9048 This is because of the fact that, in general, the soft-float and
9049 hard-float ABIs are incompatible; the 2.18 binutils do checking
9050 of the Tag_GNU_Power_ABI_FP attribute of the files to be linked, and
9051 produce the worning like above if these are not compatible.
9053 The incompatibility of ABIs is concerned only the float values:
9054 e.g. the soft-float ABI assumes the float argument passing in the
9055 pair of rX registers, and the hard-float ABI assumes passing of
9056 the float argument in the fX register. When we don't pass the float
9057 arguments between the functions compiled with different floatness,
9058 then such an application will work correctly.
9059 This is the case for the FPU POST: u-boot (compiled with soft-float)
9060 doesn't pass to (and doesn't get from) the FPU POST functions any
9061 floats; there are no functions exported from the post/lib_ppc/fpu/
9062 objects which would work with float parameters/returns too. So, we
9063 can reassure the linker not to worry about the difference in ABI
9064 attributes of linking files just by setting the 'soft-float'
9065 attribute for the objects in post/lib_ppc/fpu. And this patch does
9068 Also, to avoid passing both soft- and hard-float options in CFLAGS
9069 when compiling the files from post/lib_ppc/fpu (which is OK, but
9070 looks rather dirty) this patch removes the soft-float string from
9071 CFLAGS in post/lib_ppc/fpu/Makefile.
9073 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
9075 commit a7c9310457e85b4598abe5b304108edf11332e2f
9076 Author: Peter Tyser <ptyser@xes-inc.com>
9077 Date: Wed Dec 17 16:36:22 2008 -0600
9079 Add support for Maxim's DS4510 I2C device
9081 Initial support for the DS4510, a CPU supervisor with
9082 integrated EEPROM, SRAM, and 4 programmable non-volatile
9083 GPIO pins. The CONFIG_DS4510 define enables support
9084 for the device while the CONFIG_CMD_DS4510 define
9085 enables the ds4510 command. The additional
9086 CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
9087 CONFIG_DS4510_RST defines add additional sub-commands
9088 to the ds4510 command when defined.
9090 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
9092 commit b6fc6fd49a84543e1324e1620b9f301ff7c1f27f
9093 Author: Dirk Eibach <eibach@gdsys.de>
9094 Date: Tue Dec 16 14:51:56 2008 +0100
9096 common: Iteration limit for memory test.
9098 The iteration limit is passed to mtest as a fourth parameter:
9099 [start [end [pattern [iterations]]]]
9100 If no fourth parameter is supplied, there is no iteration limit and the
9101 test will loop forever.
9103 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
9105 commit 97cae3a4c68d856374ccc70fd2c5f8714cc94f7d
9106 Author: Stefan Roese <sr@denx.de>
9107 Date: Mon Dec 15 15:40:12 2008 +0100
9109 serial: Rename driver vcth to vct to support other board variants
9111 Moved driver vcth.c to vct.c to better reflect the VCT board series.
9112 This driver is now used by the VCT platforms:
9118 Signed-off-by: Stefan Roese <sr@denx.de>
9120 commit 36ede4d63e59c9277ec180b09c39b8bf46425ba2
9121 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
9122 Date: Fri Dec 12 00:45:27 2008 +0900
9124 nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir
9126 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
9128 commit c3284b030b1cd492b4f46c576aea01bef258599d
9129 Author: Peter Korsgaard <jacmet@sunsite.dk>
9130 Date: Wed Dec 10 16:24:16 2008 +0100
9132 common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
9134 Support bootdelay=0 in abortboot for the CONFIG_AUTOBOOT_KEYED case
9135 similar to the CONFIG_ZERO_BOOTDELAY_CHECK support for the
9136 !CONFIG_AUTOBOOT_KEYED case.
9138 Do this by reversing the loop so we do at least one iteration before
9139 checking for timeout.
9141 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
9143 commit 94f9279f7bbdc01bbc7cf85aedf9b545943b94c3
9144 Author: Niklaus Giger <niklaus.giger@netstal.com>
9145 Date: Mon Dec 8 17:24:08 2008 +0100
9147 Added legacy flash ST Micro M29W040B
9149 commit 626d07348e5f9f302f4ea182161a89f7362a0488
9150 Author: Graeme Russ <graeme.russ@gmail.com>
9151 Date: Mon Dec 8 20:04:51 2008 +1100
9153 Fixed off-by-one errors in lib_m68k/interrupts.c
9155 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9157 commit a5989c42ae5e295f274a795c426c47819bbdbfda
9158 Author: Graeme Russ <graeme.russ@gmail.com>
9159 Date: Sun Dec 7 10:29:05 2008 +1100
9161 Removed all references to CONFIG_SYS_RESET_GENERIC
9163 Generic i386 reset - #define made redundant by weak function
9165 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9167 commit 2b5360eb2bc0b741ae5cb3c84d35ccdd17667c8a
9168 Author: Graeme Russ <graeme.russ@gmail.com>
9169 Date: Sun Dec 7 10:29:04 2008 +1100
9171 Remove #ifdef CONFIG_SC520 in source code
9173 CONFIG_SC520 is now used for conditional compile
9175 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9177 commit ead056bc206f6b7ee6dc98766678b64635ea20b8
9178 Author: Graeme Russ <graeme.russ@gmail.com>
9179 Date: Sun Dec 7 10:29:03 2008 +1100
9181 Added MMCR reset functionality
9183 Reset function specific to AMD SC520 microcontroller - Is more of a
9184 'hard reset' that the triple fault.
9186 Requires CONFIG_SYS_RESET_SC520 to be defined in config
9188 I would have liked to add this to a new file (cpu/i386/sc520/reset.c)
9189 but ld requires that a object file in a library arhive MUST contain
9190 at least one function which does not override a weak function (and is
9191 called from outside the object file) in order for that object file to
9192 be extracted from the archive. This would be the only function on the
9193 new file, and hence, will never get linked in.
9195 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9197 commit 3f5f18d12d32ee0661bf51dfc55752c005230d6e
9198 Author: Graeme Russ <graeme.russ@gmail.com>
9199 Date: Sun Dec 7 10:29:02 2008 +1100
9201 Moved generic (triple fault) reset code
9203 Moved from interrupts.c to cpu.c and made into a weak function to
9204 allow vendor specific override
9206 Vendor specific CPU reset (like the AMD SC520 MMCR reset) can now be
9207 added to the vendor specific code without the need to remember to
9208 #undef usage of the generic method and if you forget to include your
9209 custom reset method, you will always get the default.
9211 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9213 commit 9933d609020c297788f53f334c8465fa7a99b10c
9214 Author: Graeme Russ <graeme.russ@gmail.com>
9215 Date: Sun Dec 7 10:29:01 2008 +1100
9217 Moved definition of set_vector() to new header file
9219 This allows for future tidy ups and functionality that will require
9222 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9224 commit 407976185e0dda2c90e89027121a1071b9c77bfb
9225 Author: Graeme Russ <graeme.russ@gmail.com>
9226 Date: Sun Dec 7 10:29:00 2008 +1100
9228 Moved sc520 specific code into new cpu/i386/sc520 folder
9230 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9231 Signed-off-by: Wolfgang Denk <wd@denx.de>
9233 commit 85ffbbd51914925a542d8528be7f072e5ab02157
9234 Author: Graeme Russ <graeme.russ@gmail.com>
9235 Date: Sun Dec 7 10:28:58 2008 +1100
9237 Renamed cpu/i386/reset.S to resetvec.S
9239 Brings i386 in line with other CPUs with a reset vector and frees up reset.c
9240 for CPU reset functions
9242 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9244 commit a3f4c123f569474e80ea012b8db0de46afdb6443
9245 Author: Wolfgang Denk <wd@denx.de>
9246 Date: Sat Jan 24 01:01:49 2009 +0100
9248 Makefile: keep lists sorted.
9250 Signed-off-by: Wolfgang Denk <wd@denx.de>
9252 commit c620c01e96814558470698ed5cab1bf2f504d1b5
9253 Author: Graeme Russ <graeme.russ@gmail.com>
9254 Date: Sun Dec 7 10:28:57 2008 +1100
9256 Added initial eNET board support
9258 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
9260 commit 0c0ccf401ee03a5008fc2c19b05a662bce1a1086
9261 Author: Gary Jennejohn <garyj@denx.de>
9262 Date: Thu Nov 20 11:37:26 2008 +0100
9264 POWERPC 82xx: add the SCC as an HDLC controller
9266 Right now this is only used by keymile.
9268 Signed-off-by: Gary Jennejohn <garyj@denx.de>
9270 commit 1e8f4e78ca393b3d8e86bd8055758dd465d9113f
9271 Author: Heiko Schocher <hs@denx.de>
9272 Date: Thu Nov 20 09:59:09 2008 +0100
9274 powerpc, keymile boards: extract identical config options
9276 This patch extracts the identical config options for the
9277 keymile boards mgcoge, mgsuvd and kmeter1 in a new
9278 common config file keymile-common.h.
9280 Signed-off-by: Heiko Schocher <hs@denx.de>
9282 commit 210c8c00aad3328145204adab434bb7d70b06b75
9283 Author: Heiko Schocher <hs@denx.de>
9284 Date: Fri Nov 21 08:29:40 2008 +0100
9286 powerpc: keymile: Add a check for the PIGGY debug board
9288 Check the presence of the PIGGY on the keymile boards mgcoge,
9289 mgsuvd and kmeter1. If the PIGGY is not present, dont register
9290 this Ethernet device.
9292 Signed-off-by: Heiko Schocher <hs@denx.de>
9293 Acked-by: Ben Warren <biggerbadderben@gmail.com>
9295 commit de0443614af4d16675ab436665aeb11ddc9f7214
9296 Author: Heiko Schocher <hs@denx.de>
9297 Date: Thu Nov 20 09:57:47 2008 +0100
9299 powerpc: 83xx: add support for the kmeter1 board
9301 This patch adds support for the kmeter1 board from Keymile,
9302 based on a Freescale MPC8360 CPU.
9304 - serial console on UART 1
9307 - Ethernet RMII Mode over UCC4
9310 Signed-off-by: Heiko Schocher <hs@denx.de>
9312 commit 3feb647f3fd0881382c7a29f4cf280b66473ae0a
9313 Author: Sergei Poselenov <sposelenov@emcraft.com>
9314 Date: Tue Nov 4 13:51:18 2008 +0100
9316 Add a do_div() wrapper macro, lldiv().
9318 Add a do_div() wrapper, lldiv(). The new inline function doesn't modify
9319 the dividend and returns the result of division, so it is useful
9320 in complex expressions, i.e. "return(a/b)" -> "return(lldiv(a,b))"
9322 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
9324 commit 18af1c5f0f7402dc0d6a71b012c68025dd97cf72
9325 Author: Kumar Gala <galak@kernel.crashing.org>
9326 Date: Fri Jan 23 14:22:14 2009 -0600
9328 85xx: Add a 36-bit physical configuration for MPC8572DS
9330 We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
9331 to allow for larger memory sizes.
9333 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9335 commit c51fc5d53c4560abc4d0a6126c06fc68133d1528
9336 Author: Kumar Gala <galak@kernel.crashing.org>
9337 Date: Fri Jan 23 14:22:13 2009 -0600
9339 85xx: Handle eLBC difference w/36-bit physical
9341 The eLBC only handles 32-bit physical address in systems with 36-bit
9342 physical. The previos generation of LBC handled 34-bit physical
9343 address in 36-bit systems. Added a new CONFIG option to convey
9344 the difference between the LBC and eLBC.
9346 Also added defines for XAM bits used in LBC for the extended 34-bit
9349 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9351 commit 72a9414a8e21e9536822c7353bc08d21ce5ad53d
9352 Author: Kumar Gala <galak@kernel.crashing.org>
9353 Date: Fri Jan 23 14:22:12 2009 -0600
9355 85xx: Use BR_ADDR macro for NAND chipselects
9357 Use the new BR_ADDR macro to properly setup the address field of the
9358 localbus chipselects used by NAND.
9360 This allows us to deal with 36-bit phys on these boards in the future.
9362 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9364 commit 2fc7eb0cfc608c9369001d57a0411af5e6a58f7c
9365 Author: Haiying Wang <Haiying.Wang@freescale.com>
9366 Date: Thu Jan 15 11:58:35 2009 -0500
9368 Add secondary CPUs processor frequency for e500 core
9370 This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS,
9371 and prints each CPU's frequency separately. It also fixes up each CPU's
9372 frequency in "clock-frequency" of fdt blob.
9374 Signed-off-by: James Yang <James.Yang@freescale.com>
9375 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9377 commit bf5b1f0c0d28ce062e1d368680632dfb099de692
9378 Author: Dave Liu <daveliu@freescale.com>
9379 Date: Fri Nov 21 16:31:53 2008 +0800
9381 85xx: enable the auto self refresh for wake up ARP
9383 The wake up ARP feature need use the memory to process
9384 wake up packet, we enable auto self refresh to support it.
9386 Signed-off-by: Dave Liu <daveliu@freescale.com>
9387 Acked-by: Andy Fleming <afleming@freescale.com>
9389 commit b4983e16d150ab7d039704c310aacbd2f4dc1e0f
9390 Author: Dave Liu <daveliu@freescale.com>
9391 Date: Fri Nov 21 16:31:43 2008 +0800
9393 fsl-ddr: use the 1T timing as default configuration
9395 For light loaded system, we use the 1T timing to gain better
9396 memory performance, but for some heavily loaded system,
9397 you have to add the 2T timing options to board files.
9399 Signed-off-by: Dave Liu <daveliu@freescale.com>
9400 Acked-by: Andy Fleming <afleming@freescale.com>
9402 commit 22cca7e1cd54590e967c73558b07ffbdccd39504
9403 Author: Dave Liu <daveliu@freescale.com>
9404 Date: Fri Nov 21 16:31:35 2008 +0800
9406 fsl-ddr: make the self refresh idle threshold configurable
9408 Some 85xx processors have the advanced power management feature,
9409 such as wake up ARP, that needs enable the automatic self refresh.
9411 If the DDR controller pass the SR_IT (self refresh idle threshold)
9412 idle cycles, it will automatically enter self refresh. However,
9413 anytime one transaction is issued to the DDR controller, it will
9414 reset the counter and exit self refresh state.
9416 Signed-off-by: Dave Liu <daveliu@freescale.com>
9417 Acked-by: Andy Fleming <afleming@freescale.com>
9419 commit 22ff3d01348e0a2dc369b7efcbac30e4ce86d178
9420 Author: Dave Liu <daveliu@freescale.com>
9421 Date: Fri Nov 21 16:31:29 2008 +0800
9423 fsl-ddr: clean up the ddr code for DDR3 controller
9425 - The DDR3 controller is expanding the bits for timing config
9426 - Add the DDR3 32-bit bus mode support
9428 Signed-off-by: Dave Liu <daveliu@freescale.com>
9429 Acked-by: Andy Fleming <afleming@freescale.com>
9431 commit 80ee3ce6d7fe9441b4352d7cfaf6afc2507b1106
9432 Author: Dave Liu <daveliu@freescale.com>
9433 Date: Fri Nov 21 16:31:22 2008 +0800
9435 fsl-ddr: update the bit mask for DDR3 controller
9437 According to the latest 8572 UM, the DDR3 controller
9438 is expanding the bit mask, and we use the extend ACTTOPRE
9439 mode when tRAS more than 19 MCLK.
9441 Signed-off-by: Dave Liu <daveliu@freescale.com>
9443 commit aca5f018a8386b85469482ed9867e3e29a2437d0
9444 Author: Kumar Gala <galak@kernel.crashing.org>
9445 Date: Tue Dec 2 16:08:40 2008 -0600
9447 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
9449 Introduce a new define to seperate out the virtual address that PCI
9450 IO space is at from the physical address. In most situations these are
9451 mapped 1:1. However any code accessing the bus should use VIRT.
9453 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9454 Acked-by: Andy Fleming <afleming@freescale.com>
9456 commit 5af0fdd81c3370c3a51421208fda568bdcbbec23
9457 Author: Kumar Gala <galak@kernel.crashing.org>
9458 Date: Tue Dec 2 16:08:39 2008 -0600
9460 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
9462 Introduce a new define to seperate out the virtual address that PCI
9463 memory is at from the physical address. In most situations these are
9464 mapped 1:1. However any code accessing the bus should use VIRT.
9466 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9467 Acked-by: Andy Fleming <afleming@freescale.com>
9469 commit a6e04c344ad1eefd47a75484441b385da815b8df
9470 Author: Kumar Gala <galak@kernel.crashing.org>
9471 Date: Tue Dec 2 16:08:38 2008 -0600
9473 85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boards
9475 Use the _MEM_PHYS defines instead of _MEM_BUS for LAW and real address fields
9476 of TLBs. This is what we should have always been using from the start.
9478 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9479 Acked-by: Andy Fleming <afleming@freescale.com>
9481 commit 5f91ef6acdbadec33e0192049e2b24a1d9692f1d
9482 Author: Kumar Gala <galak@kernel.crashing.org>
9483 Date: Tue Dec 2 16:08:37 2008 -0600
9485 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards
9487 Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead
9488 of _IO_BASE so we are more explicit.
9490 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9492 commit 10795f42cb94e71bcb262b615084f69dd886399a
9493 Author: Kumar Gala <galak@kernel.crashing.org>
9494 Date: Tue Dec 2 16:08:36 2008 -0600
9496 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boards
9498 Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead
9499 of _MEM_BASE so we are more explicit.
9501 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9502 Acked-by: Andy Fleming <afleming@freescale.com>
9504 commit c953ddfd56b3ae3f28910fe3aed6de6968d1c9aa
9505 Author: Kumar Gala <galak@kernel.crashing.org>
9506 Date: Tue Dec 2 14:19:34 2008 -0600
9508 85xx: separate FLASH BASE virtual from physical address
9510 Added a CONFIG_SYS_FLASH_BASE_PHYS for use as the physical address and
9511 maintain CONFIG_SYS_FLASH_BASE as the virtual address of the flash.
9513 This allows us to deal with 36-bit phys on these boards in the future.
9515 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9516 Acked-by: Andy Fleming <afleming@freescale.com>
9518 commit 52b565f5ad23b682489055b187767d8bf1c2e444
9519 Author: Kumar Gala <galak@kernel.crashing.org>
9520 Date: Tue Dec 2 14:19:33 2008 -0600
9522 85xx: separate PIXIS virtual from physical address
9524 Added a PIXIS_BASE_PHYS for use as the physical address and maintain
9525 PIXIS_BASE as the virtual address of the PIXIS fpga registers.
9527 This allows us to deal with 36-bit phys on these boards in the future.
9529 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9530 Acked-by: Andy Fleming <afleming@freescale.com>
9532 commit 30837e5b21d5a742983581ab9ee3fac085311d19
9533 Author: Haiying Wang <Haiying.Wang@freescale.com>
9534 Date: Tue Nov 11 08:52:09 2008 -0500
9536 Add README file for MPC8572DS board
9538 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
9539 Acked-by: Andy Fleming <afleming@freescale.com>
9541 commit 6dadc9195ad642cc662632f4d92f92d3d71e8bf2
9542 Author: Mike Frysinger <vapier@gentoo.org>
9543 Date: Mon Oct 20 16:15:04 2008 -0400
9545 Blackfin: use common strmhz() in system output
9547 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9549 commit 5bb907a4925397789c90d074f4f7e92ce6b39402
9550 Author: Ron Madrid <ron_madrid@sbcglobal.net>
9551 Date: Thu Jan 22 15:05:24 2009 -0800
9553 mpc83xx: New board support for SIMPC8313
9555 This patch will create a new board, SIMPC8313, from Sheldon Instruments. This
9556 board boots from NAND devices and is configureable for either large or small
9557 page devices. The board supports non-soldered DDR2, one ethernet port, a
9558 Marvell 88E1118 PHY, and PCI host support. The board also has a FPGA connected
9559 to the eLBC providing glue logic to a TMS320C67xx DSP.
9561 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
9562 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9564 commit d4bade8d77aa20e2846fa4accff0e7fa7961a134
9565 Author: Mike Frysinger <vapier@gentoo.org>
9566 Date: Sun Jan 18 19:46:06 2009 -0500
9568 nand: fixup printf modifiers to match types used
9570 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9571 Signed-off-by: Scott Wood <scottwood@freescale.com>
9573 commit 389e6620e2271096df3316917528003627db4021
9574 Author: Schlaegl Manfred jun <manfred.schlaegl@gmx.at>
9575 Date: Tue Jan 20 16:57:55 2009 +0100
9577 nand read.jffs2 (nand_legacy) in common/cmd_nand.c
9579 Error with CONFIG_NAND_LEGACY in common/cmd_nand.c:
9580 With current code "nand read.jffs2s" (read and skip bad blocks) is always interpreted as
9581 "nand read.jffs2" (read and fill bad blocks with 0xff). This is because ".jffs2" is
9582 tested before ".jffs2s" and only the first two characters are compared.
9585 Test for ".jffs2s" first and compare the first 7 characters.
9587 Signed-off-by: Scott Wood <scottwood@freescale.com>
9589 commit 6c869637fef31e66380f0ea1d49690a2e26ec0d7
9590 Author: Wolfgang Grandegger <wg@grandegger.com>
9591 Date: Fri Jan 16 18:55:54 2009 +0100
9593 NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
9595 This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
9596 changes the default from 8 to 1 for the legacy and the new MTD
9597 NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
9598 in the board config files because none of the boards use multi
9599 chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
9602 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
9604 but that's bogus and did not work anyhow.
9606 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
9607 Signed-off-by: Scott Wood <scottwood@freescale.com>
9609 commit c70564e6b1bd08f3230182392238907f3531a87e
9610 Author: Dave Liu <daveliu@freescale.com>
9611 Date: Tue Dec 2 11:48:51 2008 +0800
9613 NAND: Fix cache and memory inconsistency issue
9615 We load the secondary stage u-boot image from NAND to
9616 system memory by nand_load, but we did not flush d-cache
9617 to memory, nor invalidate i-cache before we jump to RAM.
9618 When the system has cache enabled and the TLB/page attribute
9619 of system memory is cacheable, it will cause issues.
9621 - 83xx family is using the d-cache lock, so all of d-cache
9622 access is cache-inhibited. so you can't see the issue.
9623 - 85xx family is using d-cache, i-cache enable, partial
9624 cache lock. you will see the issue.
9626 This patch fixes the cache issue.
9628 Signed-off-by: Dave Liu <daveliu@freescale.com>
9629 Signed-off-by: Scott Wood <scottwood@freescale.com>
9631 commit 50657c273278f74378e1ac39b41d612b92fdffa0
9632 Author: Nishanth Menon <menon.nishanth@gmail.com>
9633 Date: Sat Dec 13 09:43:06 2008 -0600
9635 NAND: Enable nand lock, unlock feature
9637 Enable nand lock, unlock and status of lock feature.
9638 Not every device and platform requires this, hence,
9639 it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK
9641 Nand unlock and status operate on block boundary instead
9642 of page boundary. Details in:
9643 http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT
9645 Intial solution provided by Vikram Pandita <vikram.pandita@ti.com>
9646 Includes preliminary suggestions from Scott Wood
9648 Signed-off-by: Nishanth Menon <nm@ti.com>
9649 Signed-off-by: Scott Wood <scottwood@freescale.com>
9651 commit 69fb8be4fc07162fdf6edf04bdc7233b0e9a920e
9652 Author: Mike Frysinger <vapier@gentoo.org>
9653 Date: Sat Dec 6 02:40:55 2008 -0500
9655 NAND: move board_nand_init to nand.h
9657 Rather than putting the function prototype for board_nand_init() in the one
9658 place where it gets called, put it into nand.h so that every place that also
9659 defines it gets the prototype. Otherwise, errors can go silently unnoticed
9660 such as using the wrong return value (void rather than int) when defining
9663 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9664 Signed-off-by: Scott Wood <scottwood@freescale.com>
9666 commit 1ae39862044ebb1e682234b51f94421e3f871d6a
9667 Author: Stefan Roese <sr@denx.de>
9668 Date: Tue Dec 2 11:06:47 2008 +0100
9670 OneNAND: Additional sync with 2.6.27
9672 - Add subpage write support
9673 - Add onenand_oob_64/32 ecclayout
9675 This has been missing and without it UBI has some incompatibilies issues
9676 with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is
9677 placed differently (2048 instead of 512) without this fix.
9679 Signed-off-by: Stefan Roese <sr@denx.de>
9680 Signed-off-by: Scott Wood <scottwood@freescale.com>
9682 commit 1714f51a2009baaecf3d4f6e3bd8c4e93a8d3f23
9683 Author: Kyungmin Park <kmpark@infradead.org>
9684 Date: Thu Nov 13 15:14:33 2008 +0900
9686 Add markbad function
9688 Add missing markbad function
9689 If not, it's hang when it entered the mtd->mark_bad().
9691 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9693 commit c438ea175d8d002c1063b7a94b0c0e26668d1ac9
9694 Author: Stefan Roese <sr@denx.de>
9695 Date: Wed Nov 12 13:47:24 2008 +0100
9697 OneNAND: Bad block aware read/write command support
9699 Update OneNAND command to support bad block awareness.
9700 Also change the OneNAND command style to better match the
9703 Signed-off-by: Stefan Roese <sr@denx.de>
9704 Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
9706 commit 8cf11f3aa78673730e9ecbbe4b75213b53f212c8
9707 Author: Stefan Roese <sr@denx.de>
9708 Date: Tue Nov 11 10:29:09 2008 +0100
9710 OneNAND: Save version_id in onenand_chip struct
9712 The version (ver_id) was not stored in the onenand_chip structure and
9713 because of this the continuous locking scheme could be enabled on some
9716 Signed-off-by: Stefan Roese <sr@denx.de>
9718 commit 4fca3310d611cc0f51d7295ef3557afbdbd91dc3
9719 Author: Stefan Roese <sr@denx.de>
9720 Date: Tue Nov 11 10:28:53 2008 +0100
9722 OneNAND: Fix compiler warnings
9724 Signed-off-by: Stefan Roese <sr@denx.de>
9726 commit 1ac5744e33ee0aa6d6ddab3b99f9e70953156e69
9727 Author: Dave Liu <daveliu@freescale.com>
9728 Date: Tue Nov 4 14:55:06 2008 +0800
9730 mpc83xx: enable eLBC NAND support for MPC8315ERDB board
9732 Signed-off-by: Dave Liu <daveliu@freescale.com>
9734 commit ef0921d6b05aeb9034158f9bef5323d6da9c925e
9735 Author: Kyungmin Park <kmpark@infradead.org>
9736 Date: Tue Nov 4 09:24:07 2008 +0900
9740 Sync with OneNAND kernel codes
9742 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9744 commit e7f325be9edeb84bb457301776bbac1f7257dafc
9745 Author: Michal Simek <monstr@monstr.eu>
9746 Date: Mon Jan 5 13:35:31 2009 +0100
9748 microblaze: Use cache functions (especially cache status)
9749 in systems which are configured without flash
9751 commit e9b737deb2c30125362d20e24170617476026e94
9752 Author: Michal Simek <monstr@monstr.eu>
9753 Date: Mon Jan 5 13:29:32 2009 +0100
9755 microblaze: Add cache flush
9757 commit b4f8dda35bfad447b4106828232705b2e878d168
9758 Author: Michal Simek <monstr@monstr.eu>
9759 Date: Mon Jan 5 13:28:40 2009 +0100
9761 microblaze: Add bootup messages to board.c
9763 commit 330e55459bc9983341da6c1d5c7fe00a664436fe
9764 Author: Michal Simek <monstr@monstr.eu>
9765 Date: Fri Dec 19 13:25:55 2008 +0100
9767 microblaze: Change microblaze-generic config file
9769 Signed-off-by: Michal Simek <monstr@monstr.eu>
9771 commit 52a822ed9c37a2ea0ed112a26d8ff5a6cb1c6f10
9772 Author: Michal Simek <monstr@monstr.eu>
9773 Date: Fri Dec 19 13:14:05 2008 +0100
9775 microblaze: Rename ml401 to microblaze-generic
9777 Signed-off-by: Michal Simek <monstr@monstr.eu>
9779 commit 6677876181cc8772bca8a372479a500d160f3993
9780 Author: Scott Wood <scottwood@freescale.com>
9781 Date: Tue Jan 20 11:56:11 2009 -0600
9783 83xx: Use the proper sequence for updating IMMR.
9785 This ensures that subsequent accesses properly hit the new window.
9787 The dcbi during the NAND loop was accidentally working around this;
9788 it's no longer necessary, as the cache is not enabled.
9790 Reported-by: Suchit Lepcha <Suchit.Lepcha@freescale.com>
9791 Signed-off-by: Scott Wood <scottwood@freescale.com>
9792 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9794 commit 8b34557c546e5e9f34ebf83c93413dad973d93df
9795 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
9796 Date: Thu Jan 8 04:26:19 2009 +0300
9798 mpc83xx: Add PCI-E support for MPC837XEMDS boards
9800 MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
9801 provides two PCI-E (x2) ports. Though, only one port can be used in x2
9802 mode. Two ports can function simultaneously in x1 mode.
9804 PCI-E x1/x2 modes can be switched via "pex_x2" environment variable.
9806 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9807 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9809 commit 8f11e34b31a7be124a3239653f33af9510502045
9810 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
9811 Date: Thu Jan 8 04:26:17 2009 +0300
9813 mpc83xx: Add PCI-E support for MPC8315ERDB boards
9815 MPC8315ERDB boards features PCI-E x1 and Mini PCI-E x1 ports. Let's
9818 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9819 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9821 commit fd6646c0b9ebe7e5afc4ae4c78097d9cd317a5e8
9822 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
9823 Date: Thu Jan 8 04:26:12 2009 +0300
9825 mpc83xx: Add support for MPC83xx PCI-E controllers
9827 This patch adds support for MPC83xx PCI-E controllers in Root Complex
9830 The patch is based on Tony Li and Dave Liu work[1].
9832 Though unlike the original patch, by default we don't register PCI-E
9833 buses for use in U-Boot, we only configure the controllers for future
9834 use in other OSes (Linux). This is done because we don't have enough
9835 of spare BATs to map all the PCI-E regions.
9837 To actually use PCI-E in U-Boot, users should explicitly define
9838 CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
9839 only then U-Boot will able to access PCI-E, but at the cost of disabled
9840 address translation.
9842 [1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html
9844 Signed-off-by: Tony Li <tony.li@freescale.com>
9845 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9846 Acked-by: Dave Liu <daveliu@freescale.com>
9847 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9849 commit 88ecf55cabd7aea28fe8093720e208f53ccfdcf5
9850 Author: Ira Snyder <iws@ovro.caltech.edu>
9851 Date: Mon Jan 12 13:33:17 2009 -0800
9853 MPC8349EMDS: do not setup unused PCI clock outputs in PCI agent mode
9855 When running in PCI agent mode, the PCI_CLK_OUT signals are not used, so do
9856 not enable them. See the MPC8349EA Reference Manual, Section 4.4.2
9857 "Clocking in PCI Agent Mode".
9859 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
9860 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9862 commit 75f35209f702bb26826855ed8c8e4d108ab5f412
9863 Author: Ira Snyder <iws@ovro.caltech.edu>
9864 Date: Mon Jan 12 13:32:26 2009 -0800
9866 83xx: PCI agent mode fixes for multi-board systems
9868 When running a system with 2 or more MPC8349EMDS boards in PCI agent mode,
9869 the boards will lock up the PCI bus by scanning against each other.
9871 The boards lock against each other by trying to access the PCI bus before
9872 clearing their configuration lock bit. Both boards end up in a loop,
9873 sending and receiving "Target Not Ready" messages forever.
9875 When running in PCI agent mode, the scanning now takes place after the
9876 boards have cleared their configuration lock bit.
9878 Also, add a missing declaration to the mpc83xx.h header file, fixing a
9881 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
9882 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9884 commit 455a46915b82896cc2070eb326d075555c2bc580
9885 Author: Ron Madrid <ron_madrid@sbcglobal.net>
9886 Date: Fri Dec 12 13:12:45 2008 -0800
9888 mpc83xx: Size optimization of start.S
9890 Currently there are in excess of 100 bytes located at the beginning of the image
9891 built by start.S that are not being utilized. This patch moves a few functions
9892 into this part of the image. This will create a greater number of *available*
9893 bytes that can be used by board specific code in NAND builds and will decrease
9894 the size of the assembled code in other builds.
9896 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
9897 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9899 commit 72d15e705bc3983884105cb7755c7ba80e74a0a5
9900 Author: Wolfgang Denk <wd@denx.de>
9901 Date: Wed Jan 21 23:08:12 2009 +0100
9905 Signed-off-by: Wolfgang Denk <wd@denx.de>
9907 commit 635e5f8fc82365e6e9734b3132bc95135a6de679
9908 Author: Wolfgang Denk <wd@denx.de>
9909 Date: Sun Jan 18 21:37:48 2009 +0100
9915 Signed-off-by: Wolfgang Denk <wd@denx.de>
9917 commit 4cda437898f7873752f0201757cd33f12196ce87
9918 Author: Mike Frysinger <vapier@gentoo.org>
9919 Date: Sat Jan 17 13:32:42 2009 -0500
9921 build system: treat all Darwin's alike
9923 The x86 based version of Darwin behaves the same quirky way as the powerpc
9924 Darwin, so only check HOSTOS when setting up Darwin workarounds.
9926 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9928 commit c088a108c75db565e07292fd668dfa5491e85bc2
9929 Author: Peter Korsgaard <jacmet@sunsite.dk>
9930 Date: Wed Jan 14 13:52:24 2009 +0100
9932 fdt_resize(): fix actualsize calculations with unaligned blobs
9934 The code in fdt_resize() to extend the fdt size to end on a page boundary
9935 is wrong for fdt's not located at an address aligned on a page boundary.
9936 What's even worse, the code would make actualsize shrink rather than grow
9937 if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(),
9938 causing fdt_add_mem_rsv to fail.
9940 Fix it by aligning end address (blob + size) to a page boundary instead.
9941 For aligned fdt's this is equivalent to what we had before.
9943 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
9945 commit fadad1573fb16c90025f08a2861d6047d093cba7
9946 Author: Mike Frysinger <vapier@gentoo.org>
9947 Date: Fri Jan 9 04:38:17 2009 -0500
9951 The recvfrom() function takes a socklen_t, not an int.
9953 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
9955 commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa
9956 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9957 Date: Sun Jan 11 16:35:16 2009 +0100
9959 sh: serial: use readx/writex accessors
9961 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9962 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9964 commit 9e1fa628bdb64745811cdd26c4f953846c076180
9965 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9966 Date: Sun Jan 11 16:35:15 2009 +0100
9968 sh: serial: coding style cleanup
9970 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9971 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9973 commit c9935c992575922b7ef13eec0656ed8665d324e3
9974 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9975 Date: Sun Jan 11 17:48:56 2009 +0900
9977 sh: Fix compile error on lowlevel_init file
9979 lowlevel_init of SH was corrected to use the write/readXX macro.
9980 However, there was a problem that was not able to be compiled partially.
9981 This patch corrected this.
9983 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9985 commit a5b04d00bfeb940c62232972ce644d50b45797f9
9986 Author: Kieran Bingham <kieranbingham@gmail.com>
9987 Date: Tue Dec 30 01:16:03 2008 +0000
9989 sh: Fix up rsk7203 target for out of tree build
9991 Fix up rsk7203 target to build successfully using out-of-tree build.
9993 Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
9994 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9996 commit f7e78f3b74aae9caca2997bad865a72338326c0a
9997 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9998 Date: Sat Dec 20 19:29:49 2008 +0100
10000 sh: use write{8,16,32} in all lowlevel_init
10002 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10003 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10005 commit e4430779623af500de1cee7892c379f07ef59813
10006 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10007 Date: Sat Dec 20 19:29:48 2008 +0100
10009 sh: lowlevel_init coding style cleanup
10011 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10012 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10014 commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9
10015 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10016 Date: Sat Dec 20 15:27:45 2008 +0100
10018 sh: update sh2/sh2a timer coding style
10020 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10021 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10023 commit 1e15ff999322e81af4c0c0c548908f38944ba39c
10024 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10025 Date: Sat Dec 20 15:25:22 2008 +0100
10027 sh: update sh timer coding style
10029 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10030 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10032 commit 0e3ece33801e377be67ffa29f083421ad820f28b
10033 Author: Wolfgang Denk <wd@denx.de>
10034 Date: Wed Jan 14 23:26:05 2009 +0100
10036 Prepare 2009.01-rc2
10040 Signed-off-by: Wolfgang Denk <wd@denx.de>
10042 commit e92c9a860e44c14513c8909ce4299e253a775eeb
10043 Author: Wolfgang Denk <wd@denx.de>
10044 Date: Wed Jan 14 22:35:30 2009 +0100
10046 cpu/mpc824x/Makefile: fix warning with parallel builds
10048 Parallel builds would occasionally issue this build warning:
10050 ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists
10052 Use "ln -sf" as quick work around for the issue.
10054 Signed-off-by: Wolfgang Denk <wd@denx.de>
10056 commit 3ba605d4beec649438539e7df97b5fedb26592fb
10057 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10058 Date: Fri Jan 2 12:18:49 2009 +0100
10060 ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards
10062 This patch adds esd's loadpci BSP command to CPCI4052 and
10063 CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM.
10065 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10066 Signed-off-by: Stefan Roese <sr@denx.de>
10068 commit 600fe46fb3dab7f07604f9009904f31584415114
10069 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10070 Date: Fri Jan 2 12:18:12 2009 +0100
10072 ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
10074 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10075 Signed-off-by: Stefan Roese <sr@denx.de>
10077 commit f6a1f490d224c600a09137e58d1026d150b8e679
10078 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10079 Date: Fri Jan 2 12:17:36 2009 +0100
10081 ppc4xx: Cleanup CPCI405 board code
10083 This patch cleans up CPCI405 board support:
10085 - unification of spaces in function calls
10088 Use correct io accessors on peripherals.
10090 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10091 Signed-off-by: Stefan Roese <sr@denx.de>
10093 commit fceebb45a0b97e92f9889861f8c3b9cb885e706f
10094 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10095 Date: Fri Jan 2 12:16:35 2009 +0100
10097 ppc4xx: Enable auto RS485 mode on PLU405 boards
10099 This patch turns on the auto RS485 mode in the 2nd external
10100 uart on PLU405 boards. This is a special mode of the used
10101 Exar XR16C2850 uart. Because these boards only have a 485 physical
10102 layer connected it's a good idea to turn it on by default.
10104 Signed-off-by: Matthias Fuchs <mf@esd.eu>
10105 Signed-off-by: Stefan Roese <sr@denx.de>
10107 commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6
10108 Author: Haiying Wang <Haiying.Wang@freescale.com>
10109 Date: Tue Jan 13 16:29:28 2009 -0500
10111 Some changes of TLB entry setting for MPC8572DS
10113 - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode,
10114 all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0
10115 can not access PIXIS_BASE anymore (any access will cause DataTLBError exception)
10117 - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board.
10119 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10121 commit 950264317eb9594b2b5ee2fb65206200a1c6007a
10122 Author: Haiying Wang <Haiying.Wang@freescale.com>
10123 Date: Tue Jan 13 16:29:22 2009 -0500
10125 Change DDR tlb start entry to CONFIG param for 85xx
10127 So that we can locate the DDR tlb start entry to the value other than 8. By
10128 default, it is still 8.
10130 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10132 commit 6d3a10f73ece7ffb736890c10e023222612a4aa0
10133 Author: Roy Zang <tie-fei.zang@freescale.com>
10134 Date: Fri Jan 9 16:02:35 2009 +0800
10136 Change PCIE1&2 deciide logic on MPC8544DS board more readable
10138 The IO port selection for MPC8544DS board:
10140 PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
10141 PCIE2 0x4, 0x5, 0x6, 0x7
10143 This patch changes the PCIE12 and PCIE2 logic more readable.
10144 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10146 commit 028e116811d28a031660f1ad9e20ac1293b3c5c7
10147 Author: Roy Zang <tie-fei.zang@freescale.com>
10148 Date: Fri Jan 9 16:01:52 2009 +0800
10150 PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit
10152 PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
10154 On MPC8572DS board, PCIE refers to PCIE1.
10155 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10157 commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47
10158 Author: Roy Zang <tie-fei.zang@freescale.com>
10159 Date: Fri Jan 9 16:00:55 2009 +0800
10161 Fix IO port selection issue on MPC8544DS and MPC8572DS boards
10163 The IO port selection is not correct on MPC8572DS and MPC8544DS board.
10164 This patch fixes this issue.
10167 PCIE1 0x2, 0x3, 0x7, 0xb, 0xc, 0xf
10173 PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
10174 PCIE2 0x4, 0x5, 0x6, 0x7
10176 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
10178 commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946
10179 Author: Becky Bruce <beckyb@kernel.crashing.org>
10180 Date: Wed Dec 3 22:36:44 2008 -0600
10182 mpc8610hpcd: Fix PCI mapping concepts
10184 Rename _BASE to _BUS, as it's actually a PCI bus address,
10185 separate virtual and physical addresses into _VIRT and _PHYS,
10186 and use each appopriately. This makes the code easier to read
10187 and understand, and facilitates mapping changes going forward.
10189 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
10191 commit 79e436cad3b4a7db88408c3f05175028f30d700d
10192 Author: Becky Bruce <beckyb@kernel.crashing.org>
10193 Date: Wed Dec 3 22:36:26 2008 -0600
10195 sbc8641d: Fix PCI mapping concepts
10197 Rename _BASE to _BUS, as it's actually a PCI bus address,
10198 separate virtual and physical addresses into _VIRT and _PHYS,
10199 and use each appopriately. This makes the code easier to read
10200 and understand, and facilitates mapping changes going forward.
10202 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
10204 commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0
10205 Author: Wolfgang Denk <wd@denx.de>
10206 Date: Mon Jan 12 14:50:35 2009 +0100
10208 MPC86xx: fix build warnings
10210 Signed-off-by: Wolfgang Denk <wd@denx.de>
10212 commit 032a1c934ef4dc003281f57302b6e693062c1868
10213 Author: Mike Frysinger <vapier@gentoo.org>
10214 Date: Mon Jan 5 16:09:44 2009 -0500
10216 bf537-stamp/nand: fix board_nand_init prototype
10218 The board_nand_init() function should return an int, not void.
10220 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10222 commit 687f952e4119594ab913be11c90f7f018c2a7a79
10223 Author: Mike Frysinger <vapier@gentoo.org>
10224 Date: Thu Dec 11 07:04:48 2008 -0500
10226 Blackfin: drop CONFIG_SPI handling in board init
10228 The eeprom SPI init functions are duplicated as the common code already
10229 executes these for us.
10231 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10233 commit e7e684b10d73a303902208594c7c3e7e0d753282
10234 Author: Mike Frysinger <vapier@gentoo.org>
10235 Date: Fri Oct 24 17:51:57 2008 -0400
10237 Blackfin: fix out-of-tree building with ldscripts
10239 Many of the Blackfin board linker scripts are preprocessed, so make sure we
10240 output the linker script into the build tree rather than the source tree.
10242 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10244 commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb
10245 Author: Mike Frysinger <vapier@gentoo.org>
10246 Date: Fri Oct 24 17:48:54 2008 -0400
10248 Blackfin: fix linker scripts to work with --gc-sections
10250 Make sure all .text sections get pulled in and the entry point is properly
10251 referenced so they don't get discarded when linking with --gc-sections.
10253 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10255 commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58
10256 Author: Mike Frysinger <vapier@gentoo.org>
10257 Date: Sat Oct 11 20:45:44 2008 -0400
10259 Blackfin: set proper LDRFLAGS for parallel booting LDRs
10261 In order to boot an LDR out of parallel flash, the ldr utility needs a few
10262 flags to tell it to generate the right header.
10264 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10266 commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3
10267 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10268 Date: Tue Jan 6 21:41:59 2009 +0100
10270 at91rm9200: move define from lowlevel_init to header
10272 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10274 commit 8a48686fac2030287765f1970ea046bd5734b733
10275 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10276 Date: Sat Jan 3 17:22:26 2009 +0100
10278 m501sk: move to the common memory setup
10280 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10282 commit d481c80d78f954133c035dae6c7d22de3625795d
10283 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10284 Date: Sat Jan 3 17:22:25 2009 +0100
10286 at91rm9200: rename lowlevel init value to CONFIG_SYS_
10288 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10290 commit 4e170b16625291aa10d0d9abc3f34e8a5945d157
10291 Author: Nicolas Ferre <nicolas.ferre@atmel.com>
10292 Date: Tue Jan 6 21:13:14 2009 +0100
10294 at91: add at91sam9xeek board support
10296 At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
10297 it as another entry for at91sam9260 in the Makefile.
10299 Check documentation at :
10300 http://www.atmel.com/dyn/products/product_card.asp?part_id=4263
10302 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
10303 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10305 commit 9ffd53db870a7da134f9a1ae76894a6b31237be5
10306 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10307 Date: Tue Jan 6 21:15:57 2009 +0100
10309 fix bmp_logo.h make dependencies to allow parallel build
10311 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10313 commit e12d9a8fb48d24176efffccc072b445e60a3afe4
10314 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10315 Date: Sat Jan 3 17:22:24 2009 +0100
10317 at91: Fix Atmel's at91sam9 boards out of tree build
10319 introduced in commit 89a7a87f084c
10321 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10323 commit 0668236bafaa1c11c521652a2facebc74beecbf0
10324 Author: Wolfgang Denk <wd@denx.de>
10325 Date: Tue Dec 30 22:56:11 2008 +0100
10327 README: update mailing list name and hits to patch submission.
10329 Signed-off-by: Wolfgang Denk <wd@denx.de>
10331 commit d9011f9b75561a0bd9254934c2bb2bc799d4f645
10332 Author: Peter Tyser <ptyser@xes-inc.com>
10333 Date: Tue Dec 23 16:32:01 2008 -0600
10335 85xx: Enable inbound PCI config cycles for X-ES boards cleanup
10337 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10339 commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df
10340 Author: Peter Tyser <ptyser@xes-inc.com>
10341 Date: Tue Dec 23 16:32:00 2008 -0600
10343 XPedite5200 board support cleanup
10345 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10347 commit fea91edee8ae0295e3c30b1ff544df51f4d668e1
10348 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10349 Date: Tue Dec 2 21:58:04 2008 +0100
10351 usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
10353 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10354 Signed-off-by: Remy Böhmer <linux@bohmer.net>
10356 commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28
10357 Author: Trent Piepho <tpiepho@freescale.com>
10358 Date: Wed Dec 3 15:16:37 2008 -0800
10360 mpc8[56]xx: Put localbus clock in sysinfo and gd
10362 Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
10363 and print it out, but don't save it.
10365 This changes where its calculated and stored to be more consistent with the
10366 CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
10368 The localbus frequency is added to sysinfo and calculated when sysinfo is
10369 set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
10371 get_clocks() copies the frequency into the global data, as the other
10372 frequencies are, into a new field that is only enabled for MPC85xx and
10375 checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
10376 from sysinfo, like the other frequencies, instead of calculating it on the
10379 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
10380 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10381 Acked-by: Jon Loeliger <jdl@freescale.com>
10383 commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7
10384 Author: Trent Piepho <tpiepho@freescale.com>
10385 Date: Wed Dec 3 15:16:36 2008 -0800
10387 mpc86xx: Double local bus clock divider
10389 The local bus clock divider should be doubled for both 8610 and 8641.
10391 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
10392 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10393 Acked-by: Jon Loeliger <jdl@freescale.com>
10395 commit 446c381e3e16f19857b72ea0d06241267b8b9d58
10396 Author: Trent Piepho <tpiepho@freescale.com>
10397 Date: Wed Dec 3 15:16:35 2008 -0800
10399 mpc8568: Double local bus clock divider
10401 The clock divider for the MPC8568 local bus should be doubled, like the
10402 other newer MPC85xx chips.
10404 Since there are now more chips with a 2x divider than a 1x, and any new
10405 85xx chips will probably be 2x, invert the sense of the #if so that it
10406 lists the 1x chips instead of the 2x ones.
10408 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
10409 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10410 Acked-by: Jon Loeliger <jdl@freescale.com>
10412 commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03
10413 Author: Dave Liu <daveliu@freescale.com>
10414 Date: Tue Dec 16 12:09:27 2008 +0800
10416 85xx: Fix the boot window issue
10418 If one custom board is using the 8MB flash, it is set
10419 as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000.
10420 The current start.S code will be broken at switch_as.
10422 It is because the TLB1[15] is set as 16MB page size,
10423 EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000.
10425 For the 8MB flash case, the EPN = 0xefxxxxxx,
10426 RPN = 0xffxxxxxx. Assume the virt address of switch_as
10427 is 0xef7ff18c, the real address of the instruction at
10428 switch_as should be 0xff7ff18c. the 0xff7ff18c is out
10429 of the range of the default 8MB boot LAW window
10430 0xff800000 - 0xffffffff.
10432 So when we switch to AS1 address space at switch_as,
10433 the core can't fetch the instruction at switch_as any
10434 more. It will cause broken issue.
10436 Signed-off-by: Dave Liu <daveliu@freescale.com>
10438 commit 58da8890d5fbd074746037722a423de9ac408616
10439 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
10440 Date: Thu Dec 11 15:47:50 2008 -0500
10442 sbc8548: use proper PHY address
10444 The values given for the PHY address were wrong, so the code
10445 read no valid PHY ID, and fell through to the generic PHY
10446 support, which would work on 1000M but would not auto negotiate
10447 down to 100M or 10M.
10449 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
10451 commit ad22f9273c6f24fbfa917e867680e9688e0c59c5
10452 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
10453 Date: Thu Dec 11 15:47:51 2008 -0500
10455 sbc8548: enable command line editing by default.
10457 Lets make things a bit more user friendly. It isn't 1985 anymore.
10459 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
10461 commit bd93105fa171184a71ca8b22be03dc2705cfbd3f
10462 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
10463 Date: Thu Dec 11 15:47:49 2008 -0500
10465 sbc8548: don't enable the 3rd and 4th eTSEC
10467 These interfaces don't have usable connectors on the board, so don't
10468 bother enumerating or configuring them.
10470 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
10472 commit 181a3650113883728927928b3ac81ad6dade4b2c
10473 Author: Haiying Wang <Haiying.Wang@freescale.com>
10474 Date: Wed Dec 3 10:08:19 2008 -0500
10476 Set IVPR to kenrel entry point in second core boot page
10478 Assuming the OSes exception vectors start from the base of kernel address, and
10479 the kernel physical starting address can be relocated to an non-zero address.
10480 This patch enables the second core to have a valid IVPR for debugger before
10481 kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
10482 value for second core which runs kernel at different physical address other
10485 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
10487 commit a5d212a263c58cc746481bf1fc878510533ce7d6
10488 Author: Trent Piepho <tpiepho@freescale.com>
10489 Date: Wed Dec 3 15:16:34 2008 -0800
10491 mpc8xxx: LCRR[CLKDIV] is sometimes five bits
10493 On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
10496 In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It
10497 should be safe as the fifth bit was defined as reserved and set to 0.
10499 Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.
10501 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
10502 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10503 Acked-by: Jon Loeliger <jdl@freescale.com>
10505 commit 58ec4866ed916c7e422f5107bb27b0822084728e
10506 Author: Trent Piepho <tpiepho@freescale.com>
10507 Date: Wed Dec 3 15:16:38 2008 -0800
10509 mpc8[56]xx: Put localbus clock in device tree
10511 Export the localbus frequency in the device tree, the same way the CPU, TB,
10512 CCB, and various other frequencies are exported in their respective device
10515 Some localbus devices need this information to be programed correctly, so
10516 it makes sense to export it along with the other frequencies.
10518 Unfortunately, when someone wrote the localbus dts bindings, they didn't
10519 bother to define what the "compatible" property should be. So it seems no
10520 one was quite sure what to put in their dts files.
10522 Based on current existing dts files in the kernel source, I've used
10523 "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
10524 of the 85xx devices, and are looked for by the Linux code. The eLBC is
10525 apparently not entirely backward compatible with the pq3 LBC and so eLBC
10526 equipped platforms like 8572 won't use pq3-localbus.
10528 For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
10529 and is also looked for by the Linux code. On MPC8641, I've also used
10530 "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
10531 which don't use "fsl,elbc" or any other acceptable name to match on.
10533 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
10534 Acked-by: Kumar Gala <galak@kernel.crashing.org>
10535 Acked-by: Jon Loeliger <jdl@freescale.com>
10537 commit 9d94aff699eed38b286814fcbb335f3eb8516a0e
10538 Author: Kumar Gala <galak@kernel.crashing.org>
10539 Date: Tue Dec 16 14:59:22 2008 -0600
10541 NAND FSL elbc: Use virt_to_phys to determine which bank is in use
10543 The current code that determines which bank/chipselect is used for a
10544 given NAND instance only worked for 32-bit addresses and assumed
10545 a 1:1 mapping. This breaks in 36-bit physical configs.
10547 The proper way to handle this is to use the virt_to_phys() and
10548 BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
10549 with the the virtual address the NAND code uses.
10551 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10552 Acked-by: Scott Wood <scottwood@freescale.com>
10554 commit 77c8115b1f1871811633eae77a5a700fac1f0e50
10555 Author: Kumar Gala <galak@kernel.crashing.org>
10556 Date: Tue Dec 16 14:59:21 2008 -0600
10558 ppc: Use addrmap in virt_to_phys and map_physmem.
10560 If we have addr map support enabled use the mapping functions to
10561 implement virt_to_phys() and map_physmem().
10563 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10565 commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90
10566 Author: Kumar Gala <galak@kernel.crashing.org>
10567 Date: Tue Dec 16 14:59:20 2008 -0600
10569 85xx: Add support to populate addr map based on TLB settings
10571 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10573 commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec
10574 Author: Peter Tyser <ptyser@xes-inc.com>
10575 Date: Mon Dec 1 13:47:13 2008 -0600
10577 XPedite5200 board support
10579 Initial support for Extreme Engineering Solutions XPedite5200 -
10580 a MPC8548-based PMC single board computer.
10582 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10584 commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f
10585 Author: Peter Tyser <ptyser@xes-inc.com>
10586 Date: Wed Oct 29 12:39:27 2008 -0500
10588 85xx: Enable inbound PCI config cycles for X-ES boards
10590 Update X-ES Freescale boards to allow inbound PCI configuration
10591 cycles when configured as agent/endpoint.
10593 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10595 commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f
10596 Author: Peter Tyser <ptyser@xes-inc.com>
10597 Date: Wed Dec 17 16:36:23 2008 -0600
10599 XPedite5370 board support
10601 Initial support for Extreme Engineering Solutions XPedite5370 -
10602 a MPC8572-based 3U VPX single board computer with a PMC/XMC
10605 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10607 commit e92739d34e2d6b6aca93b2598248210710897ce8
10608 Author: Peter Tyser <ptyser@xes-inc.com>
10609 Date: Wed Dec 17 16:36:21 2008 -0600
10611 Add support for PCA953x I2C gpio devices
10613 Initial support for NXP's 4 and 8 bit I2C gpio expanders
10614 (eg pca9537, pca9557, etc). The CONFIG_PCA953X define
10615 enables support for the devices while the CONFIG_CMD_PCA953X
10616 define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
10617 define enables an 'info' sub-command which provides summary
10618 information for the given pca953x device.
10620 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10622 commit 7a8979591171676417ab36852d8811a8c46accd8
10623 Author: Peter Tyser <ptyser@xes-inc.com>
10624 Date: Wed Oct 29 12:39:26 2008 -0500
10626 pci/fsl_pci_init: Enable inbound PCI config cycles
10628 Add fsl_pci_config_unlock() function to enable a
10629 PCI/PCIe interface configured in agent/endpoint mode to
10630 respond to inbound PCI configuration cycles.
10632 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10634 commit 92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb
10635 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10636 Date: Wed Dec 17 16:43:18 2008 +0100
10638 avr32: Remove second definition of virt_to_phys()
10640 The second definition introduced by 65e43a1063 conflicts with the
10643 Also, convert the existing definition to use phys_addr_t. The volatile
10644 qualifier is still needed due to brain damage elsewhere.
10646 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10648 commit b616f2b545f73757669b37386f0b37bb61fc6797
10649 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10650 Date: Mon Sep 8 22:27:18 2008 +0200
10652 MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file
10654 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10655 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10657 commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b
10658 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10659 Date: Tue Dec 16 22:10:31 2008 +0100
10661 MIPS: qemu_mips: update doc to use all disk and boot linux kernel
10663 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10664 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10666 commit 13095b2f07dacb1f863772266c1789d47a523a8a
10667 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10668 Date: Tue Dec 16 22:10:30 2008 +0100
10670 MIPS: qemu_mips: move env storage just after u-boot
10672 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10673 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10675 commit aced78d852d0b009e8aaa1445af8cb40861ee549
10676 Author: Wolfgang Denk <wd@denx.de>
10677 Date: Tue Dec 16 23:48:27 2008 +0100
10679 Prepare 2009.01-rc1
10681 Signed-off-by: Wolfgang Denk <wd@denx.de>
10683 commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
10684 Author: Wolfgang Denk <wd@denx.de>
10685 Date: Tue Dec 16 23:13:46 2008 +0100
10687 include/configs/at91cap9adk.h: fix typo.
10689 Signed-off-by: Wolfgang Denk <wd@denx.de>
10691 commit 45ca04f2377361593151d2d4da51f8ba4832d233
10692 Author: Wolfgang Denk <wd@denx.de>
10693 Date: Tue Dec 16 22:32:25 2008 +0100
10695 board/trab/memory.c: Fix compile problems.
10697 Apply changes from commit 44b4dbed to board/trab/memory.c, too.
10699 Actually we'd need a major cleanup here - as it turns out,
10700 board/trab/memory.c is more or less a verbatim copy of
10701 post/drivers/memory.c ... but then, trab is EOL anyway,r
10702 so this is not worth the effort.
10704 Signed-off-by: Wolfgang Denk <wd@denx.de>
10706 commit ff49ea8977b56916edd5b1766d9939010e30b181
10707 Author: Scott Wood <scottwood@freescale.com>
10708 Date: Tue Dec 16 14:24:16 2008 -0600
10710 NAND: Mark the BBT as scanned prior to calling scan_bbt.
10712 Otherwise, recursion can occur if scan_bbt does not find a bad block
10713 table, and tries to write one, and the attempt to erase the BBT area
10714 causes a bad block check.
10716 Signed-off-by: Scott Wood <scottwood@freescale.com>
10718 commit 584eedab66d0828f2d571a24b10526c4e65f547b
10719 Author: Ilya Yanok <yanok@emcraft.com>
10720 Date: Thu Dec 11 05:51:57 2008 +0300
10722 jffs2: include <linux/mtd/compat.h> instead of defining own min_t
10724 Include <linux/mtd/compat.h> header for min_t definition instead of
10725 providing our own one. Removes warnings in case of OneNAND support
10728 Although I thinks it's a bit silly to include <linux/mtd/compat.h>
10731 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
10732 Acked-by: Stefan Roese <sr@denx.de>
10734 commit b1ffecec37b57a59c139042267faac458e5324e9
10735 Author: Becky Bruce <beckyb@kernel.crashing.org>
10736 Date: Wed Dec 3 23:04:37 2008 -0600
10738 powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
10740 Casting a pointer to a phys_addr_t when it's an unsigned long long
10741 on a 32-bit system without first casting to a non-pointer type
10742 generates a compiler warning. Fix this.
10744 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
10746 commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351
10747 Author: Wolfgang Denk <wd@denx.de>
10748 Date: Tue Dec 16 16:22:50 2008 +0100
10750 trab: make trab_fkt standalone code independent of libgcc
10752 Use our own local functions in lib_arm/ instead.
10754 Signed-off-by: Wolfgang Denk <wd@denx.de>
10756 commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded
10757 Author: Wolfgang Denk <wd@denx.de>
10758 Date: Tue Dec 16 14:44:06 2008 +0100
10760 post/Makefile: fix dependency problem with parallel builds
10762 Parallel builds (using "make -jN") would occasionally fail with error
10764 ppc_4xxFP-objdump: string.o: File format not recognized
10766 post/libpost.a(cpu.o): In function `cpu_post_test':
10767 /home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
10768 or similar. We now make sure to run the 'postdeps" step before
10769 attempting to build the specific POST libraries.
10771 Signed-off-by: Wolfgang Denk <wd@denx.de>
10773 commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9
10774 Author: Wolfgang Denk <wd@denx.de>
10775 Date: Tue Dec 16 14:41:02 2008 +0100
10777 Makefile: fix dependency problem with parallel builds
10779 Parallel builds (using "make -jN") would occasionally fail with error
10781 include/autoconf.mk:212: *** missing separator. Stop.
10782 Line numbers and affected boards were changing. Obviously some
10783 Makefiles included autoconf.mk while it was still being written to.
10784 As a fix, we now write to a temporary file first and then rename it,
10785 so that it is really ready to use as soon as it appears.
10787 Signed-off-by: Wolfgang Denk <wd@denx.de>
10789 commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c
10790 Author: Wolfgang Denk <wd@denx.de>
10791 Date: Tue Dec 16 01:02:17 2008 +0100
10793 Coding style cleanup, update CHANGELOG.
10795 Signed-off-by: Wolfgang Denk <wd@denx.de>
10797 commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
10798 Author: Mike Frysinger <vapier@gentoo.org>
10799 Date: Thu Dec 11 18:39:08 2008 -0500
10801 spi/stmicro: fix debug() display of cmd
10803 The stmicro_wait_ready() func tries to show the actual opcode that was sent
10804 to the device, but instead it displays the array pointer. Fix it to pull
10805 out the opcode from the start of the array.
10807 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10809 commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
10810 Author: Mike Frysinger <vapier@gentoo.org>
10811 Date: Thu Dec 11 06:23:37 2008 -0500
10813 env_sf: support embedded environments
10815 If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
10816 size is larger than the env size, then it means the env is embedded in a
10817 block. So we have to save/restore the part of the sector which is not the
10818 environment. Previously, saving the environment in SPI flash in this
10819 setup would probably brick the board as the rest of the sector tends to
10820 contain actual U-Boot data/code.
10822 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
10823 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
10825 commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
10826 Author: Timur Tabi <timur@freescale.com>
10827 Date: Wed Dec 3 11:28:30 2008 -0600
10829 i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
10831 All implementations of the functions i2c_reg_read() and
10832 i2c_reg_write() are identical. We can save space and simplify the
10833 code by converting these functions into inlines and putting them in
10836 Signed-off-by: Timur Tabi <timur@freescale.com>
10837 Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10839 commit e39cd81c44740d7355d277ed3d38536cbe1e003d
10840 Author: Dave Liu <daveliu@freescale.com>
10841 Date: Fri Dec 5 15:36:14 2008 +0800
10843 lib_ppc: rework the flush_cache
10845 - It is possible to miss flush/invalidate the last
10846 cache line, we fix it at here.
10847 - add the volatile and memory clobber.
10849 They are pointed by Scott Wood.
10851 Signed-off-by: Dave Liu <daveliu@freescale.com>
10853 commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
10854 Author: Kumar Gala <galak@kernel.crashing.org>
10855 Date: Sat Dec 13 17:20:28 2008 -0600
10857 Introduce addr_map library
10859 Add a library that helps in translating between virtual and physical
10860 addresses. This library can be useful as a simple means to implement
10861 map_physmem() and virt_to_phys() for platforms that need functionality
10862 beyond the simple 1:1 mapping.
10864 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10866 commit 65e43a10631537dcb92c302d36301a12308216c3
10867 Author: Kumar Gala <galak@kernel.crashing.org>
10868 Date: Sat Dec 13 17:20:27 2008 -0600
10870 Introduce virt_to_phys()
10872 virt_to_phys() returns the physical address given a virtual. In most
10873 cases this will be just the input value as the vast majority of
10874 systems run in a 1:1 mode.
10876 However in systems that are not running this way it should report the
10877 physical address or ~0 if no mapping exists for the given virtual
10880 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10882 commit 45845301af3de8675c1f7bbc815c6de35452605a
10883 Author: Yuri Tikhonov <yur@emcraft.com>
10884 Date: Sun Dec 7 22:12:50 2008 +0100
10886 POST Make: fix the sub-dir dependencies missing.
10888 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
10890 commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
10891 Author: Martin Michlmayr <tbm@cyrius.com>
10892 Date: Wed Aug 6 14:44:05 2008 +0300
10894 Fix a typo in fw_env.config
10896 Reported-by: Martin Michlmayr <tbm@cyrius.com>
10897 Signed-off-by: Wolfgang Denk <wd@denx.de>
10899 commit ba490b7761c62b549c222a9723e532dc801a3899
10900 Author: Peter Tyser <ptyser@xes-inc.com>
10901 Date: Mon Dec 1 16:22:45 2008 -0600
10903 Remove unused CONFIG_ADDR_STREAMING defines
10905 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10907 commit d16da93430520d3e46c1ab52eedacf36ab7a2311
10908 Author: Peter Tyser <ptyser@xes-inc.com>
10909 Date: Mon Nov 24 11:54:47 2008 -0600
10911 cmd_mem: Remove unused variable
10913 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
10915 commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
10916 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10917 Date: Sun Dec 14 10:29:39 2008 +0100
10921 Also fix some minor typos.
10923 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10924 Signed-off-by: Wolfgang Denk <wd@denx.de>
10926 commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
10927 Author: Sergei Poselenov <sposelenov@emcraft.com>
10928 Date: Fri Sep 19 12:07:34 2008 +0200
10930 Remove compiler warning: target CPU does not support interworking
10932 This warning is issued by modern ARM-EABI GCC on non-thumb targets.
10934 Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
10935 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10937 commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
10938 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10939 Date: Mon Nov 24 13:33:51 2008 +0100
10941 Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
10943 FDT support is used for both FIT style images and for architectures
10944 that can pass a fdt blob to an OS (ppc, m68k, sparc).
10946 For other architectures and boards which do not pass a fdt blob to an
10947 OS but want to use the new uImage format, we just need FIT support.
10949 Now we can have the 4 following configurations :
10951 1) FIT only CONFIG_FIT
10952 2) fdt blob only CONFIG_OF_LIBFDT
10953 3) both CONFIG_OF_LIBFDT & CONFIG_FIT
10956 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
10958 commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
10959 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10960 Date: Wed Dec 10 15:13:32 2008 +0100
10962 ppc4xx: Disable EEPROM write access on PMC440 boards
10964 This patch disables EEPROM wrtie access by default on PMC440 board.
10966 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10968 commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
10969 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10970 Date: Wed Dec 10 15:12:56 2008 +0100
10972 ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
10974 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
10976 commit 71fa0714fe5134bc8718c38d5261d267e88582ba
10977 Author: Stefan Roese <sr@denx.de>
10978 Date: Tue Nov 18 16:36:12 2008 +0100
10980 MIPS: Flush data cache upon relocation
10982 This patch now adds a flush to the data cache upon relocation. The
10983 current implementation is missing this. Only a comment states that it
10984 should be done. So let's really do it now.
10986 Signed-off-by: Stefan Roese <sr@denx.de>
10987 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10989 commit 44174343688dba32571a34550dba08971c65fef1
10990 Author: Stefan Roese <sr@denx.de>
10991 Date: Tue Nov 18 16:36:22 2008 +0100
10993 MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT
10995 This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
10996 enables support for boards where the lowlevel initialization is
10997 already done when U-Boot runs (e.g. via OnChip ROM).
10999 This will be used in the upcoming VCTH board support.
11001 Signed-off-by: Stefan Roese <sr@denx.de>
11002 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11004 commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
11005 Author: Stefan Roese <sr@denx.de>
11006 Date: Wed Nov 12 13:18:02 2008 +0100
11008 MIPS: Add board_early_init_f() to init_sequence
11010 This patch adds the board_early_init_f() call to the MIPS init
11011 sequence. A weak dummy implementation is also added which can be
11012 overridden by a board specific version.
11014 This will be used by the upcoming VCTH board support.
11016 Signed-off-by: Stefan Roese <sr@denx.de>
11017 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11019 commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
11020 Author: Stefan Roese <sr@denx.de>
11021 Date: Wed Nov 12 13:18:19 2008 +0100
11023 MIPS: Add onenand_init() to board.c and move nand_init()
11025 This patch adds a call to onenand_init() for OneNAND support and moves
11026 the nand_init() call to an earlier place, so that the environment can
11027 be used from NAND and OneNAND.
11029 Signed-off-by: Stefan Roese <sr@denx.de>
11030 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11032 commit d8bbc51c7ba9b737a20984333d19fe28a3526431
11033 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11034 Date: Tue Dec 9 11:32:46 2008 +0900
11036 sh: Update sh2/sh2a timer
11038 Renesas SH2/SH2A timer broken.
11039 This patch fix timer function.
11041 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11042 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11044 commit a319f1496210117b73198e3d889ffffaf6825d00
11045 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11046 Date: Fri Dec 5 07:27:37 2008 +0100
11048 sh: r2dplus fix register access
11050 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11051 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11053 commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
11054 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11055 Date: Tue Dec 2 07:40:03 2008 +0100
11057 sh: r2dplus/lowlevel_init: coding style fix
11059 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11060 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11062 commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
11063 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11064 Date: Tue Nov 25 11:05:19 2008 +0900
11066 sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT
11068 SH4 is different a value of CACHE_OC_NUM_ENTRIES and
11069 CACHE_OC_WAY_SHIFT every CPU.
11070 This patch corrects these values.
11072 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11073 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11075 commit e9d5f35497885b3c65d494d09a525d443dcccd3b
11076 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11077 Date: Thu Nov 20 16:44:42 2008 +0900
11079 sh: Update sh timer function
11081 Change to write/readX function and fix timer problem.
11083 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11084 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11086 commit b81786cff476c41e332eaeb679158f6527cd67d4
11087 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11088 Date: Tue Nov 4 11:58:58 2008 +0900
11090 sh: Migo-R: Update BSC value
11092 A value of BSC CS4 was wrong, Fixed it.
11094 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11095 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11097 commit 5783758fd260a02f44566ad8f29f899565cd0403
11098 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11099 Date: Mon Nov 17 16:52:09 2008 +0900
11101 sh: Update ms7722se board config
11103 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11104 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11106 commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
11107 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11108 Date: Mon Nov 17 16:53:09 2008 +0900
11110 sh: Update SuperH serial driver
11112 The address of SCFSR register is wrong at SH7720/SH7721.
11113 This patch fix this.
11115 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
11116 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11118 commit 9a1d3557dcd47365c12eeab584b822e57d994352
11119 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11120 Date: Tue Nov 11 22:20:15 2008 +0100
11122 sh: fix rsk7203 and MigoR out of tree build
11124 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11125 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
11127 commit 1951f847f0a851853871b613ad7cf21a5242226c
11128 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11129 Date: Wed Dec 10 14:41:25 2008 +0100
11131 ppc4xx: Update TEXT_BASE for CPCI405 boards
11133 This patch fixes building U-Boot for CPCI405 boards.
11135 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11136 Signed-off-by: Stefan Roese <sr@denx.de>
11138 commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
11139 Author: Stefan Roese <sr@denx.de>
11140 Date: Tue Dec 9 20:08:01 2008 +0100
11142 ppc4xx: Remove some features from ALPR to fit into 256k again
11144 Signed-off-by: Stefan Roese <sr@denx.de>
11146 commit 3b089e4f889a2902449d55e081c886ae607cae89
11147 Author: Stefan Roese <sr@denx.de>
11148 Date: Wed Dec 10 10:32:59 2008 +0100
11150 UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
11152 With this patch we set the type back to NONE upon failing UBI partition
11153 initialization. Otherwise further calls to the UBI subsystem would try
11154 to really access the non-existing UBI partition.
11156 Thanks to Michael Lawnick for pointing this out.
11158 Signed-off-by: Stefan Roese <sr@denx.de>
11160 commit 817329351639a8895cd9b87b33aeff043f3d5a44
11161 Author: Stefan Roese <sr@denx.de>
11162 Date: Wed Dec 10 10:28:33 2008 +0100
11164 UBI: Return -ENOMEM upon failing malloc
11166 Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
11169 Signed-off-by: Stefan Roese <sr@denx.de>
11171 commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
11172 Author: Ben Warren <biggerbadderben@gmail.com>
11173 Date: Tue Dec 9 23:34:15 2008 -0800
11175 Fix compile error in building MBX860T.
11177 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11179 commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
11180 Author: Michal Simek <monstr@monstr.eu>
11181 Date: Tue Nov 25 11:42:20 2008 +0100
11183 microblaze: Remove XUPV2P board
11187 Microblaze platforms use generic settings and to have
11188 many platforms is confusing that's why I decided to remove this
11189 platform from U-BOOT. ml401 tree is sufficient for covering
11190 all Microblaze platforms.
11192 This change will go through microblaze custodian tree.
11194 commit 99ba6f353582720defff6e6e6761dc455a207d31
11195 Author: Michal Simek <monstr@monstr.eu>
11196 Date: Mon Nov 24 18:25:41 2008 +0100
11198 microblaze: Remove CONFIG_LIBFDT due to error in common files
11200 commit e7d591e823a991513833af7030468409e25a3b13
11201 Author: Michal Simek <monstr@monstr.eu>
11202 Date: Mon Nov 24 11:43:00 2008 +0100
11204 microblaze: Fix ml401 uart16550 setting
11206 Signed-off-by: Michal Simek <monstr@monstr.eu>
11208 commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
11209 Author: Michal Simek <monstr@monstr.eu>
11210 Date: Mon Nov 24 11:38:22 2008 +0100
11212 microblaze: Set up relocation is done
11214 commit bcb6dd9187d4b23c748704767bd12d20c829e996
11215 Author: Mike Frysinger <vapier@gentoo.org>
11216 Date: Tue Dec 9 23:20:31 2008 -0500
11218 tools/netconsole: new script for working with netconsole over UDP
11220 While the doc/README.NetConsole does have a snippet for people to
11221 create their own netcat script, it's a lot easier to make a simple
11222 dedicated script and tell people to use it.
11224 Also spruce it up a bit to make it user friendly.
11226 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11228 commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
11229 Author: Sonic Zhang <Sonic.Zhang@analog.com>
11230 Date: Tue Dec 9 23:20:18 2008 -0500
11232 fs/fat: handle FAT on SATA
11234 The FAT file system driver should also handle FAT on SATA devices.
11236 Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
11237 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11239 commit 4cd8ed40615a7d741ef2f09ee53779ec6907b8a6
11240 Author: Ben Warren <biggerbadderben@gmail.com>
11241 Date: Tue Dec 9 23:26:31 2008 -0800
11243 Fix compile error in building MBX860T.
11244 Bug was introduced in 9eb79bd8856bcab896ed5e1f1bca159807a124dd
11246 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11248 commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
11249 Author: Jerry Van Baren <gvb.uboot@gmail.com>
11250 Date: Mon Nov 24 08:15:02 2008 -0500
11252 libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
11254 Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the
11255 following warnings from FDT:
11257 include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
11258 /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here
11260 Fix: Protect the definition of uintptr_t when compiling on the host
11263 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
11265 commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
11266 Author: Graeme Russ <graeme.russ@gmail.com>
11267 Date: Sat Nov 22 08:43:29 2008 +1100
11269 Moved sc520 PCI definitions to stand-alone file
11271 Signed Off By: Graeme Russ <graeme.russ@gmail.com>
11273 commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
11274 Author: Graeme Russ <graeme.russ@gmail.com>
11275 Date: Sat Nov 22 08:43:21 2008 +1100
11277 Fixed path to sc520 SSI include file
11279 Signed Off By: Graeme Russ <graeme.russ@gmail.com>
11281 commit d4f70da544c33db3e4fce6473dea4ecca4322545
11282 Author: Graeme Russ <graeme.russ@gmail.com>
11283 Date: Fri Nov 21 06:28:05 2008 +1100
11285 Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
11287 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
11289 commit c034075a713b60e654c64e88e87da29440f31bb4
11290 Author: Stefan Roese <sr@denx.de>
11291 Date: Wed Nov 12 13:30:10 2008 +0100
11293 serial: Add vcth UART driver
11295 This patch adds the UART driver for the upcoming VCTH board support.
11297 Signed-off-by: Stefan Roese <sr@denx.de>
11299 commit 142a80ffc3b537a9c45acd2444a42a77f147c602
11300 Author: Ilya Yanok <yanok@emcraft.com>
11301 Date: Thu Nov 13 19:49:36 2008 +0300
11303 jffs2: cache data_crc results
11305 As we moved data_crc() invocation from jffs2_1pass_build_lists() to
11306 jffs2_1pass_read_inode() data_crc is going to be calculated on each
11307 inode access. This patch adds caching of data_crc() results. There
11308 is no significant improvement in speed (because of flash access
11309 caching added in previous patch I think, crc in RAM is really fast)
11310 but this patch impacts memory usage -- every b_node structure uses
11311 12 bytes instead of 8.
11313 Signed-off-by: Alexey Neyman <avn@emcraft.com>
11314 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
11316 commit 9b7076229ec6a958bd835ab70745f7676297ce82
11317 Author: Ilya Yanok <yanok@emcraft.com>
11318 Date: Thu Nov 13 19:49:35 2008 +0300
11320 jffs2: summary support
11322 This patch adds support for reading fs information from summary
11323 node instead of scanning full eraseblock.
11325 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
11327 commit 70741004dc28946cd82c7af6789c4ddb3fc94526
11328 Author: Ilya Yanok <yanok@emcraft.com>
11329 Date: Thu Nov 13 19:49:34 2008 +0300
11331 jffs2: add buffer to cache flash accesses
11333 With this patch JFFS2 code allocates memory buffer of max_totlen size
11334 (size of the largest node, calculated during scan time) and uses it to
11335 store entire node. Speeds up loading. If malloc fails we use old ways
11338 Signed-off-by: Alexey Neyman <avn@emcraft.com>
11339 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
11341 commit 8a36d31f72411144ac0412ee7e1880e801acd754
11342 Author: Ilya Yanok <yanok@emcraft.com>
11343 Date: Thu Nov 13 19:49:33 2008 +0300
11345 jffs2: rewrite jffs2 scanning code based on Linux one
11347 Rewrites jffs2_1pass_build_lists() function in style of Linux's
11348 jffs2_scan_medium() and jffs2_scan_eraseblock().
11350 - Caching flash acceses
11351 - Smart dealing with free space
11353 Signed-off-by: Alexey Neyman <avn@emcraft.com>
11354 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
11356 commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
11357 Author: Ilya Yanok <yanok@emcraft.com>
11358 Date: Thu Nov 13 19:49:32 2008 +0300
11360 jffs2: add sector_size field to part_info structure
11362 This patch adds sector_size field to part_info structure (used
11363 by new JFFS2 code).
11365 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
11367 commit f73846956778a7dfee83403ef9747aff77198848
11368 Author: Ilya Yanok <yanok@emcraft.com>
11369 Date: Thu Nov 13 19:49:31 2008 +0300
11371 jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
11373 We need to update i_version inside cycle to find really latest version
11374 inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
11375 dump_inode() instead of calling expensive jffs2_1pass_read_inode().
11377 Signed-off-by: Alexey Neyman <avn@emcraft.com>
11378 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
11380 commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
11381 Author: Wolfgang Denk <wd@denx.de>
11382 Date: Tue Dec 9 23:13:51 2008 +0100
11384 evb64260: fix "cast to pointer from integer of different size" warnings
11386 Signed-off-by: Wolfgang Denk <wd@denx.de>
11388 commit d2776827315c3d469b8cb4cec14d58877798daa2
11389 Author: Stefan Althoefer <stefan.althoefer@web.de>
11390 Date: Sun Dec 7 19:39:11 2008 +0100
11392 USB: descriptor handling
11396 I found a bug when working with the u-boot USB subsystem on IXP425 processor
11397 (big endian Xscale aka ARMv5).
11398 I recognized that the second usb_endpoint_descriptor of the attached memory
11399 stick was corrupted.
11401 The reason for this are the packed structures below (either u-boot and
11405 /* Endpoint descriptor */
11406 struct usb_endpoint_descriptor {
11407 unsigned char bLength;
11408 unsigned char bDescriptorType;
11409 unsigned char bEndpointAddress;
11410 unsigned char bmAttributes;
11411 unsigned short wMaxPacketSize;
11412 unsigned char bInterval;
11413 unsigned char bRefresh;
11414 unsigned char bSynchAddress;
11416 } __attribute__ ((packed));
11417 /* Interface descriptor */
11418 struct usb_interface_descriptor {
11419 unsigned char bLength;
11420 unsigned char bDescriptorType;
11421 unsigned char bInterfaceNumber;
11422 unsigned char bAlternateSetting;
11423 unsigned char bNumEndpoints;
11424 unsigned char bInterfaceClass;
11425 unsigned char bInterfaceSubClass;
11426 unsigned char bInterfaceProtocol;
11427 unsigned char iInterface;
11429 unsigned char no_of_ep;
11430 unsigned char num_altsetting;
11431 unsigned char act_altsetting;
11432 struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
11433 } __attribute__ ((packed));
11436 As usb_endpoint_descriptor is only 7byte in length, the start of all
11437 odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
11438 of these structures also not word aligned.
11440 ARMv5 Architecture however does not support non-aligned multibyte
11441 data type (see A2.8 of ARM Architecture Reference Manual).
11443 Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
11444 Signed-off-by: Remy Böhmer <linux@bohmer.net>
11446 commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
11447 Author: Kumar Gala <galak@kernel.crashing.org>
11448 Date: Tue Dec 9 10:27:33 2008 -0600
11450 drivers/fsl_pci_init: Fix compile warning
11452 fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
11453 fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type
11455 The check only makes sense if we are CONFIG_PHYS_64BIT
11457 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11459 commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
11460 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11461 Date: Sun Dec 7 09:45:35 2008 +0100
11463 usbtty/omap: update to current API
11465 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11466 Signed-off-by: Remy Böhmer <linux@bohmer.net>
11468 commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
11469 Author: Anatolij Gustschin <agust@denx.de>
11470 Date: Tue Dec 9 17:52:05 2008 +0100
11472 video: fix FADS823 and RRvision compiling issues
11474 Since commit 561858ee building for FADS823 and RRvision
11475 doesn't work. Let's include version.h and timestamp.h
11476 unconditionally to fix the problem.
11478 Signed-off-by: Anatolij Gustschin <agust@denx.de>
11480 commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
11481 Author: Stefan Roese <sr@denx.de>
11482 Date: Tue Dec 2 10:53:47 2008 +0100
11484 UBI: Fix size parsing in "ubi create"
11486 Signed-off-by: Stefan Roese <sr@denx.de>
11488 commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
11489 Author: Stefan Roese <sr@denx.de>
11490 Date: Thu Nov 27 14:07:09 2008 +0100
11492 UBI: Enable re-initializing of the "ubi part" command
11494 With this patch now, the user can call "ubi part" multiple times to
11495 re-connect the UBI device to another MTD partition.
11497 Signed-off-by: Stefan Roese <sr@denx.de>
11499 commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
11500 Author: Stefan Roese <sr@denx.de>
11501 Date: Thu Nov 27 14:05:15 2008 +0100
11503 MTD: Fix problem based on non-working relocation (list head mtd_partitions)
11505 Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
11506 first call of add_mtd_partitions(). Otherwise this won't work on platforms
11507 where the relocation is broken (like MIPS or PPC).
11509 Signed-off-by: Stefan Roese <sr@denx.de>
11511 commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
11512 Author: Trent Piepho <tpiepho@freescale.com>
11513 Date: Wed Nov 12 17:29:48 2008 -0800
11515 Section name should be ".data", not "data"
11517 Signed-off-by: Trent Piepho <tpiepho@freescale.com>
11518 Signed-off-by: Wolfgang Denk <wd@denx.de>
11520 commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
11521 Author: Wolfgang Denk <wd@denx.de>
11522 Date: Tue Dec 9 00:39:08 2008 +0100
11524 MAKEALL: Automatically use parallel builds
11526 Add logic to the MAKEALL script to determine the number of CPU cores
11527 on the system, and run a parallel build if there is more than one.
11528 Usually this significantrly accelerates builds.
11530 Allow to manually adjust the number of parallel make jobs by using
11531 the "BUILD_NCPUS" environment variable.
11533 Signed-off-by: Wolfgang Denk <wd@denx.de>
11535 commit 268405fa7c44156c5192a70779920c70906af8d6
11536 Author: Wolfgang Denk <wd@denx.de>
11537 Date: Tue Dec 9 00:24:30 2008 +0100
11539 vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
11541 Signed-off-by: Wolfgang Denk <wd@denx.de>
11543 commit 153176a9414120ca1736f3cc4951623d6e14e6af
11544 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11545 Date: Tue Nov 11 06:08:59 2008 +0100
11547 avr32/bootm: remove unused variable 'ret'
11549 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11550 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11552 commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
11553 Author: Peter Tyser <ptyser@xes-inc.com>
11554 Date: Wed Nov 12 13:06:48 2008 -0600
11556 Remove unneeded CONFIG_SHELL references
11558 Make should be using the bash shell by default which makes
11559 CONFIG_SHELL unnecessary
11561 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11563 commit cf7a7b99794bac936899819b95539be1dbd71708
11564 Author: Peter Tyser <ptyser@xes-inc.com>
11565 Date: Wed Nov 12 12:33:20 2008 -0600
11567 Use bash for default GNU Make shell application
11569 Some Make script commands rely on bash-specific features like brace
11570 expansion, so default to bash for the SHELL variable with a fallback
11571 to the standard sh shell
11573 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11575 commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
11576 Author: Heiko Schocher <hs@denx.de>
11577 Date: Wed Nov 12 09:50:45 2008 +0100
11579 jffs2: rename devices_init () in common/jffs2.c
11581 rename devices_init () in common/jffs2.c to
11582 jffs2_devices_init (), because there is also a
11583 devices_init () in common/devices.c.
11585 Signed-off-by: Heiko Schocher <hs@denx.de>
11587 commit af5eb847a10f1037590001355d88bab3fe7be48b
11588 Author: Daniel Hellstrom <daniel@gaisler.com>
11589 Date: Mon Nov 10 12:46:20 2008 +0000
11591 SPARC: Fixed compiler error introduced by commit c160a9544743
11593 This patch fixes a build error for the SPARC platform. It was
11594 introduced by commit c160a9544743e80e8889edb2275538e7764ce334.
11596 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
11598 commit 4c60259899aa00f59db0d936b8807f9a26411c0f
11599 Author: Gary Jennejohn <garyj@denx.de>
11600 Date: Sun Nov 9 12:50:59 2008 +0100
11602 mgsuvd add the board-specific part of the HDLC driver
11604 Signed-off-by: Gary Jennejohn <garyj@denx.de>
11606 commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
11607 Author: Gary Jennejohn <garyj@denx.de>
11608 Date: Sun Nov 9 12:45:03 2008 +0100
11610 mgcoge add the board-specific part of the HDLC driver
11612 Signed-off-by: Gary Jennejohn <garyj@denx.de>
11614 commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
11615 Author: Gary Jennejohn <garyj@denx.de>
11616 Date: Sun Nov 9 12:36:15 2008 +0100
11618 keymile add the common parts of the HDLC driver
11620 This implements the ICN protocol used across the backplane and is
11621 needed by all the keymile boards.
11623 Signed-off-by: Gary Jennejohn <garyj@denx.de>
11625 commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
11626 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11627 Date: Fri Nov 7 22:46:22 2008 +0100
11629 drivers/bios_emulator: Move conditional compilation to Makefile
11631 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11633 commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
11634 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
11635 Date: Thu Nov 6 14:01:51 2008 -0500
11637 common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
11639 Corrected endian order printing for compact flash serial number.
11641 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
11643 commit 16a28ef219c27423a1ef502f19070c4d375079b8
11644 Author: Gary Jennejohn <garyj@denx.de>
11645 Date: Thu Nov 6 15:04:23 2008 +0100
11647 IOMUX: Add console multiplexing support.
11649 Modifications to support console multiplexing. This is controlled using
11650 CONFIG_SYS_CONSOLE_MUX in the board configuration file.
11652 This allows a user to specify multiple console devices in the environment
11653 with a command like this: setenv stdin serial,nc. As a result, the user can
11654 enter text on both the serial and netconsole interfaces.
11656 All devices - stdin, stdout and stderr - can be set in this manner.
11658 1) common/iomux.c and include/iomux.h contain the environment setting
11660 2) doc/README.iomux contains a somewhat more detailed description.
11661 3) The implementation in (1) is called from common/cmd_nvedit.c to
11662 handle setenv and from common/console.c to handle initialization of
11663 input/output devices at boot time.
11664 4) common/console.c also contains the code needed to poll multiple console
11665 devices for input and send output to all devices registered for output.
11666 5) include/common.h includes iomux.h and common/Makefile generates iomux.o
11667 when CONFIG_SYS_CONSOLE_MUX is set.
11669 Signed-off-by: Gary Jennejohn <garyj@denx.de>
11671 commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
11672 Author: Mike Frysinger <vapier@gentoo.org>
11673 Date: Tue Nov 4 16:03:46 2008 -0500
11675 strings: use puts() rather than printf()
11677 When running `strings` on really long strings, the stack tends to get
11678 smashed due to printf(). Switch to puts() instead since we're only passing
11681 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11683 commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
11684 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
11685 Date: Mon Nov 3 22:16:18 2008 +0100
11687 Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
11689 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
11691 commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
11692 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
11693 Date: Mon Nov 3 22:15:34 2008 +0100
11695 cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
11697 - fix size too small by one in sprintf
11698 - changed old (pre 2004) device name ibmEmac to emac
11699 - boot device may be overriden in board config
11700 - servername may be defined in board config
11701 - additional parameters may be defined in board config
11702 - fixed some line wrappings
11703 - replaced redundant MAX define by max
11705 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
11707 commit e9084b23d16102f44ace24379a1c0c352497ef80
11708 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
11709 Date: Mon Nov 3 22:14:36 2008 +0100
11711 Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters
11713 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
11715 commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
11716 Author: Niklaus Giger <niklaus.giger@member.fsf.org>
11717 Date: Mon Nov 3 22:13:47 2008 +0100
11719 README: Document CONFIG_SYS parameters for vxworks
11721 Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
11723 commit ace514837cac656e29c37a19569cb8ea83071126
11724 Author: Peter Tyser <ptyser@xes-inc.com>
11725 Date: Fri Oct 31 11:12:38 2008 -0500
11727 lcd: Let the board code show board-specific info cleanup
11729 remove unneeded version.h from lcd.c
11731 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11732 Signed-off-by: Wolfgang Denk <wd@denx.de>
11734 commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
11735 Author: Peter Tyser <ptyser@xes-inc.com>
11736 Date: Mon Nov 3 09:30:59 2008 -0600
11738 Update U-Boot's build timestamp on every compile
11740 Use the GNU 'date' command to auto-generate a new U-Boot
11741 timestamp on every compile.
11743 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11745 commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
11746 Author: Remy Bohmer <linux@bohmer.net>
11747 Date: Thu Dec 4 22:25:57 2008 +0100
11749 Remove redundant armv4 flag from arm926ejs compile flags
11751 Currently the arm926ejs tree has the armv4 option set during compilation.
11752 This flag does not belong here because a arm926 CPU is always a armv5 CPU.
11754 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11756 commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
11757 Author: Nicolas Ferre <nicolas.ferre@atmel.com>
11758 Date: Sat Dec 6 13:11:14 2008 +0100
11760 at91: Choose environment variables location within make config target
11762 This patch adds the possiblity to choose the media where the environment will
11763 be located. This allow to choose this fundamental configuration without editing
11766 Documentation file added.
11768 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
11769 Acked-by: Stelian Pop <stelian@popies.net>
11770 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11772 commit 1450c4a6682378567030414a9f1198c39b7730c7
11773 Author: Anatolij Gustschin <agust@denx.de>
11774 Date: Mon Nov 3 15:30:34 2008 +0100
11776 lwmon, tqm8xx: Fix build errors
11778 Commit 6b59e03e0237a40a2305ea385defdfd92000978b
11779 lcd: Let the board code show board-specific info
11781 introduced some bugs which prevent U-Boot building
11782 for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
11783 be defined in the board configuration.
11785 Also "LCD enabled" building for TQM823L doesn't work
11788 This patch fixes above-mentioned issues.
11790 Signed-off-by: Anatolij Gustschin <agust@denx.de>
11792 commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
11793 Author: Mike Frysinger <vapier@gentoo.org>
11794 Date: Sun Nov 2 01:18:18 2008 -0400
11796 ignore .gdb_history files
11798 When using gdb, history files will often get generated. So ignore them.
11800 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
11802 commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
11803 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11804 Date: Fri Oct 31 12:26:55 2008 +0100
11806 FPGA: move fpga drivers to drivers/fpga
11808 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
11810 commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
11811 Author: Peter Tyser <ptyser@xes-inc.com>
11812 Date: Mon Dec 1 16:29:38 2008 -0600
11814 net: Fix TftpStart() ip:filename bug
11816 The TftpStart() function modifies the 'BootFile'
11817 string when 'BootFile' contains both an IP address
11818 and filename (eg 1.2.3.4:/path/file). This causes
11819 subsequent calls to TftpStart to incorrectly parse
11820 the TFTP filename and server IP address to use.
11823 => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
11824 Speed: 100, half duplex
11825 Using eTSEC1 device
11826 TFTP from server 10.52.0.62; our IP address is 10.52.253.79
11828 Filename '/home/ptyser/non_existant'.
11829 ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
11830 Load address: 0x100000
11832 TFTP error: 'File not found' (1)
11836 Speed: 100, half duplex
11837 Using eTSEC1 device
11838 TFTP from server 10.52.0.33; our IP address is 10.52.253.79
11840 Filename '10.52.0.62'.
11842 Load address: 0x100000
11844 TFTP error: 'File not found' (1)
11847 TftpStart() was modified to not modify the 'BootFile' string.
11849 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11850 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11852 commit d32c5be50bf0600bfdc54223ef341ee9c63db445
11853 Author: Peter Tyser <ptyser@xes-inc.com>
11854 Date: Mon Dec 1 16:26:21 2008 -0600
11856 net: Add additional IP fragmentation check
11858 Ignore IP packets which have the "more fragments" flag bit
11859 set. This flag indicates the IP packet is fragmented and
11860 must be ignored by U-Boot.
11862 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11863 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11865 commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
11866 Author: Peter Tyser <ptyser@xes-inc.com>
11867 Date: Mon Dec 1 16:26:20 2008 -0600
11869 net: Define IP flag field values
11871 These defines were pulled from the "Add simple
11872 IP/UDP fragmentation support" patch from Frank
11873 Haverkamp <haver@vnet.ibm.com>.
11875 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11876 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11878 commit 23afaba65ec5206757e589ef334a8b38168c045f
11879 Author: Anatolij Gustschin <agust@denx.de>
11880 Date: Tue Dec 2 10:31:04 2008 +0100
11882 net: tsec: Fix Marvell 88E1121R phy init
11884 This patch tries to ensure that phy interrupt pin
11885 won't be asserted after booting. We experienced
11886 following issues with current 88E1121R phy init:
11888 Marvell 88E1121R phy can be hardware-configured
11889 to share MDC/MDIO and interrupt pins for both ports
11890 P0 and P1 (e.g. as configured on socrates board).
11891 Port 0 interrupt pin will be shared by both ports
11892 in such configuration. After booting Linux and
11893 configuring eth0 interface, port 0 phy interrupts
11894 are enabled. After rebooting without proper eth0
11895 interface shutdown port 0 phy interrupts remain
11896 enabled so any change on port 0 (link status, etc.)
11897 cause assertion of the interrupt. Now booting Linux
11898 and configuring eth1 interface will cause permanent
11899 phy interrupt storm as the registered phy 1 interrupt
11900 handler doesn't acknowledge phy 0 interrupts. This
11901 of course should be fixed in Linux driver too.
11903 Signed-off-by: Anatolij Gustschin <agust@denx.de>
11904 Acked-by: Andy Fleming <afleming@freescale.com>
11905 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11907 commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
11908 Author: Peter Tyser <ptyser@xes-inc.com>
11909 Date: Tue Dec 2 12:59:51 2008 -0600
11911 net: Fix download command parsing
11913 When CONFIG_SYS_HUSH_PARSER is defined network download
11914 commands with 1 argument in the format 'tftp "/path/file"'
11915 do not work as expected. The hush command parser strips
11916 the quotes from "/path/file" which causes the network
11917 commands to interpret "/path/file" as an address
11918 instead of the intended filename.
11920 The previous check for a leading quote in netboot_common()
11921 was replaced with a check which ensures only valid
11922 numbers are treated as addresses.
11924 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11925 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11927 commit 3c2c2f427905040c1513d0c51d637689cba48346
11928 Author: Remy Bohmer <linux@bohmer.net>
11929 Date: Thu Nov 27 22:30:27 2008 +0100
11931 Remove non-ascii characters from fat code
11933 This code contains some non-ascii characters in comment lines and code.
11934 Most editors do not display those characters properly and editing those
11935 files results always in diffs at these places which are usually not required
11936 to be changed at all. This is error prone.
11938 So, remove those weird characters and replace them by normal C-style
11939 equivalents for which the proper defines were already in the header.
11941 Signed-off-by: Remy Bohmer <linux@bohmer.net>
11943 commit dc889e865356497d3e495570118c2245ebce2631
11944 Author: Dave Liu <daveliu@freescale.com>
11945 Date: Fri Nov 28 20:16:58 2008 +0800
11947 85xx: fix the wrong DDR settings for MPC8572DS
11949 The default DDR freq is 400MHz or 800M data rate,
11950 the old settings is pure wrong for the default case.
11952 Signed-off-by: Dave Liu <daveliu@freescale.com>
11953 Acked-by: Andy Fleming <afleming@freescale.com>
11955 commit 9df59533f77de2829b4b66e5b7620e04edaa391c
11956 Author: Kumar Gala <galak@kernel.crashing.org>
11957 Date: Mon Nov 24 10:29:26 2008 -0600
11959 85xx: init gd as early as possible
11961 Moved up the initialization of GD so C code like set_tlb() can use
11962 gd->flags to determine if we've relocated or not in the future.
11964 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11965 Acked-by: Andy Fleming <afleming@freescale.com>
11967 commit aed461af81012a398a205e9be67ab37667491838
11968 Author: Kumar Gala <galak@kernel.crashing.org>
11969 Date: Mon Nov 24 10:29:25 2008 -0600
11971 85xx: Fix relocation of CCSRBAR
11973 If the virtual address for CCSRBAR is the same after relocation but
11974 the physical address is changing we'd end up having two TLB entries with
11975 the same VA. Instead we new us the new CCSRBAR virt address + 4k as a
11976 temp virt address to access the old CCSRBAR to relocate it.
11978 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11979 Acked-by: Andy Fleming <afleming@freescale.com>
11981 commit ea154a1781135d822eedee7567cc156089eae93c
11982 Author: Kumar Gala <galak@kernel.crashing.org>
11983 Date: Mon Nov 24 10:25:14 2008 -0600
11985 FSL: Moved BR_PHYS_ADDR for localbus to common header
11987 The BR_PHYS_ADDR macro is useful on all machines that have local bus
11988 which is pretty much all 83xx/85xx/86xx chips.
11990 Additionally most 85xx & 86xx will need it if they want to support
11991 36-bit physical addresses.
11993 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11994 Acked-by: Andy Fleming <afleming@freescale.com>
11996 commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
11997 Author: Peter Tyser <ptyser@xes-inc.com>
11998 Date: Mon Dec 1 13:47:12 2008 -0600
12000 85xx: Add PORDEVSR_PCI1 define
12002 Add define used to determine if PCI1 interface is in PCI or PCIX mode.
12004 Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
12006 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12007 Signed-off-by: Andy Fleming <afleming@freescale.com>
12009 commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
12010 Author: Becky Bruce <becky.bruce@freescale.com>
12011 Date: Fri Nov 21 19:24:22 2008 -0600
12013 drivers/fsl_pci_init: Fix inbound window mapping bug
12015 The current code will cause the creation of a 4GB window
12016 starting at 0 if we have more than 4GB of RAM installed,
12017 which overlaps with PCI_MEM space and causes pci_bus_to_phys()
12018 to return erroneous information. Limit the size to 4GB - 1;
12019 which causes the code to create one 2GB and one 1GB window
12022 Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
12023 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12024 Acked-by: Andy Fleming <afleming@freescale.com>
12026 commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
12027 Author: Jon Loeliger <jdl@freescale.com>
12028 Date: Thu Nov 20 15:36:48 2008 -0600
12030 Removed unused CONFIG_L1_INIT_RAM symbol.
12032 Prevent further viral propogation of the unused
12033 symbol CONFIG_L1_INIT_RAM by just removing it.
12035 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12036 Acked-by: Andy Fleming <afleming@freescale.com>
12038 commit 7008d26a40a76f90cae5824c812cfed449fb97b8
12039 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
12040 Date: Wed Oct 29 09:21:44 2008 -0500
12042 fsl ddr skip interleaving if not supported.
12044 Removed while(1) hang if memctl_intlv_ctl is set wrong.
12045 Remove embedded tabs from strings.
12047 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
12048 Acked-by: Kumar Gala <galak@kernel.crashing.org>
12049 Acked-by: Andy Fleming <afleming@freescale.com>
12051 commit dd332e18d082de75eca3fc2c7c778f5d4571a096
12052 Author: Anatolij Gustschin <agust@denx.de>
12053 Date: Thu Nov 13 18:08:57 2008 +0100
12055 85xx: socrates: fix DDR SDRAM tlb entry configuration
12057 since commit be0bd8234b9777ecd63c4c686f72af070d886517
12058 tlb entry for socrates DDR SDRAM will be reconfigured
12059 by setup_ddr_tlbs() from initdram() causing an
12060 inconsistency with previously configured DDR SDRAM tlb
12061 entry from tlb_table:
12064 IDX PID EPN SIZE V TS RPN U0-U3 WIMGE UUUSSS
12065 7 : 00 00000000 256MB V 0 -> 0_00000000 0000 -I-G- ---RWX
12066 8 : 00 00000000 256MB V 0 -> 0_00000000 0000 ----- ---RWX
12067 9 : 00 10000000 256MB V 0 -> 0_10000000 0000 ----- ---RWX
12069 This patch makes the presence of the DDR SDRAM tlb entry in
12070 the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
12073 Signed-off-by: Anatolij Gustschin <agust@denx.de>
12074 Acked-by: Andy Fleming <afleming@freescale.com>
12076 commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
12077 Author: Peter Tyser <ptyser@xes-inc.com>
12078 Date: Tue Nov 11 10:17:10 2008 -0600
12080 85xx: Add CPU 2 errata workaround to all 8548 boards
12082 All mpc8548-based boards should implement the suggested workaround
12083 to CPU 2 errata. Without the workaround, its possible for the
12084 8548's core to hang while executing a msync or mbar 0 instruction
12085 and a snoopable transaction from an I/O master tagged to make
12086 quick forward progress is present.
12088 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
12089 Acked-by: Andy Fleming <afleming@freescale.com>
12091 commit e57f0fa1333cdf3ca36110aac2900712a5f82976
12092 Author: Dave Liu <daveliu@freescale.com>
12093 Date: Tue Oct 28 17:53:45 2008 +0800
12095 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case
12097 we need TLB entry for DDR at !SPD case.
12099 Signed-off-by: Dave Liu <daveliu@freescale.com>
12100 Acked-by: Andy Fleming <afleming@freescale.com>
12102 commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
12103 Author: Dave Liu <daveliu@freescale.com>
12104 Date: Tue Oct 28 17:53:38 2008 +0800
12106 85xx: remove the unused ddr_enable_ecc in the board file
12108 The DDR controller of 8548/8544/8568/8572/8536 processors
12109 have the ECC data init feature, and the new DDR code is
12110 using the feature, and we don't need the way with DMA to
12111 init memory any more.
12113 Signed-off-by: Dave Liu <daveliu@freescale.com>
12114 Acked-by: Andy Fleming <afleming@freescale.com>
12116 commit 4a129a57d923f7c15aa1f567028a80a32d66a100
12117 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12118 Date: Sun Nov 30 19:36:53 2008 +0100
12120 at91rm9200dk: Fix typo
12122 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12124 commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
12125 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12126 Date: Sun Nov 30 19:36:50 2008 +0100
12128 AT91: remove non supported board AT91RM9200DF macro
12130 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12132 commit bd876772ee04095e5dd943d97515a1f14bad4b1c
12133 Author: Ilko Iliev <iliev@ronetix.at>
12134 Date: Tue Dec 2 17:27:54 2008 +0100
12136 mtd/dataflash.c: fix a problem with the last partition
12138 This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
12139 partition can be defined to use the area to the end of dataflash size.
12140 Now it is possible to have only one dataflash partition from 0 to the end
12141 of of dataflash size.
12143 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
12145 commit 03f797793b124dccaae145b977d15d6cb9e74504
12146 Author: Ilko Iliev <iliev@ronetix.at>
12147 Date: Tue Dec 2 17:20:17 2008 +0100
12149 fix some coding style violations.
12151 This patch fix some coding style violations.
12153 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
12155 commit 5e46b1e54112f4b7fd5185665e571510132c12a7
12156 Author: Stefan Roese <sr@denx.de>
12157 Date: Thu Nov 27 14:11:37 2008 +0100
12159 OneNAND: Add missing mtd info struct before calling onenand_erase()
12161 Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
12162 for use in UBI) via CONFIG_MTD_PARTITIONS.
12164 Signed-off-by: Stefan Roese <sr@denx.de>
12165 Signed-off-by: Scott Wood <scottwood@freescale.com>
12167 commit 29382d4064fbaff5daacff4c3209370fa5713966
12168 Author: Becky Bruce <becky.bruce@freescale.com>
12169 Date: Thu Nov 20 16:43:52 2008 -0600
12171 mpc8641: Fix error in README
12173 I made some updates to the code that didn't make it into the
12176 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12178 commit 801a194616d95e6fc426a176d9615ccbf9876c7f
12179 Author: Jon Loeliger <jdl@freescale.com>
12180 Date: Thu Nov 20 12:01:02 2008 -0600
12182 Removed unused CONFIG_L1_INIT_RAM symbol.
12184 Prevent further viral propogation of the unused
12185 symbol CONFIG_L1_INIT_RAM by just removing it.
12187 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12189 commit f698738e46cb461e28c2d58228bb34a2fcf5a475
12190 Author: Jon Loeliger <jdl@freescale.com>
12191 Date: Thu Nov 20 14:02:56 2008 -0600
12193 86xx: Fix non-64-bit compilation problems.
12195 Introducing 64-bit (36-bit) support for the MPC8641HPCN
12196 failed to accomodate the other two 86xx boards.
12197 Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
12198 CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
12199 with nominal 32-bit values.
12201 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12202 Acked-by: Becky Bruce <becky.bruce@freescale.com>
12204 commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
12205 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
12206 Date: Wed Nov 26 17:40:37 2008 +0100
12208 Remove obsolete command (apply afte USB style patch, 80 chars strict)
12210 Remove USB obsolete commmand
12212 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
12213 Signed-off-by: Remy Böhmer <linux@bohmer.net>
12215 commit de39f8c19d7c12017248c49d432dcb81db68f724
12216 Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
12217 Date: Wed Nov 26 17:41:34 2008 +0100
12219 USB style patch, 80 chars strict
12221 USB Code style patch
12223 Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
12224 Signed-off-by: Remy Böhmer <linux@bohmer.net>
12226 commit d10c5a87cb8affbb4d35a311370316d4383d598e
12227 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12228 Date: Fri Nov 7 22:46:21 2008 +0100
12230 drivers/usb: Move conditional compilation to Makefile
12232 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12233 Signed-off-by: Remy Böhmer <linux@bohmer.net>
12235 commit 2077e348c2a84901022ad95311b47b70361e6daa
12236 Author: Scott Wood <scottwood@freescale.com>
12237 Date: Tue Nov 25 10:47:02 2008 -0600
12239 NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
12241 This caused the operation to be needlessly repeated if there were
12242 no bad blocks and no errors.
12244 Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
12245 Signed-off-by: Scott Wood <scottwood@freescale.com>
12247 commit 89295028e7d8f7a524f485328279d72fdb102385
12248 Author: Michal Simek <monstr@monstr.eu>
12249 Date: Mon Nov 24 12:09:50 2008 +0100
12251 ppc4xx: ml300 remove Xilinx BSP from ml300 folder
12253 This BSP should be outside u-boot source tree.
12254 The second reason is that xilinx ppc405 was moved to generic platform.
12256 Signed-off-by: Michal Simek <monstr@monstr.eu>
12257 Signed-off-by: Stefan Roese <sr@denx.de>
12259 commit 24eea623d4974a169026a975ba12fb23d48154b1
12260 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12261 Date: Mon Nov 24 15:11:10 2008 +0100
12263 ppc4xx: Remove unused features
12265 This patch disables some unused features from the PCI405 configuration
12266 to keep U-Boot image size below 192k.
12268 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12269 Signed-off-by: Stefan Roese <sr@denx.de>
12271 commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
12272 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12273 Date: Mon Nov 24 15:11:09 2008 +0100
12275 ppc4xx: Use correct io accessors for PCI405
12277 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12278 Signed-off-by: Stefan Roese <sr@denx.de>
12280 commit 348c849d86a6f0785752b9bc497a34658713d1d1
12281 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12282 Date: Mon Nov 24 15:11:08 2008 +0100
12284 ppc4xx: Remove unused code from PCI405 code
12286 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
12287 Signed-off-by: Stefan Roese <sr@denx.de>
12289 commit 633639587e3596f0dbf5e6247dd3faf80b1d9063
12290 Author: Heiko Schocher <hs@denx.de>
12291 Date: Thu Nov 20 09:59:09 2008 +0100
12293 powerpc, keymile boards: extract identical config options
12295 This patch extracts the identical config options for the
12296 keymile boards mgcoge, mgsuvd and kmeter1 in a new
12297 common config file keymile-common.h.
12299 Signed-off-by: Heiko Schocher <hs@denx.de>
12300 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12302 commit 9482a8e3d6ac766d90e5059dce777b1e4c868a30
12303 Author: Heiko Schocher <hs@denx.de>
12304 Date: Fri Nov 21 08:29:40 2008 +0100
12306 powerpc: keymile: Add a check for the PIGGY debug board
12308 Check the presence of the PIGGY on the keymile boards mgcoge,
12309 mgsuvd and kmeter1. If the PIGGY is not present, dont register
12310 this Ethernet device.
12312 Signed-off-by: Heiko Schocher <hs@denx.de>
12313 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12315 commit 58c696eed839af894e0265064669c402dc28b371
12316 Author: Wolfgang Denk <wd@xpert.denx.de>
12317 Date: Mon Nov 24 21:50:59 2008 +0100
12319 AT91RM9200DK: fix broken boot from NOR flash
12321 Signed-off-by: Wolfgang Denk <wd@denx.de>
12323 commit 8052352f20b33bef8f9872fc983eac73d4693c38
12324 Author: Jens Scharsig <esw@bus-elektronik.de>
12325 Date: Tue Nov 18 10:48:46 2008 +0100
12327 at91rm9200: fix broken boot from nor flash
12329 This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
12330 CONFIG_AT91RM9200 is defined and nor preloader is used.
12332 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
12334 commit 25ea652e907516a283b38237e83712a918f125d7
12335 Author: Piotr Ziecik <kosmo@semihalf.com>
12336 Date: Mon Nov 17 15:58:00 2008 +0100
12338 UBI: Add proof-of-concept CFI flash support
12340 With this patch UBI can be used on CFI flash chips.
12342 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
12343 Signed-off-by: Stefan Roese <sr@denx.de>
12345 commit e6a7edbc1778d27431ac663b40a71dafa5d20578
12346 Author: Piotr Ziecik <kosmo@semihalf.com>
12347 Date: Mon Nov 17 15:57:59 2008 +0100
12349 mtd: Remove a printf() from add_mtd_device().
12351 Remove a printf() from add_mtd_device(), which produces spurious output.
12353 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
12354 Signed-off-by: Stefan Roese <sr@denx.de>
12356 commit 91809ed51d8327a8dbbf29aa98a091154c282171
12357 Author: Piotr Ziecik <kosmo@semihalf.com>
12358 Date: Mon Nov 17 15:57:58 2008 +0100
12360 cfi-mtd: Add cfi-mtd driver.
12362 Add cfi-mtd driver, which exports CFI flash to MTD layer.
12363 This allows CFI flash devices to be used from MTD layer.
12365 Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
12366 option. Initialization is done by calling cfi_mtd_init() from
12369 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
12370 Signed-off-by: Stefan Roese <sr@denx.de>
12372 commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
12373 Author: Piotr Ziecik <kosmo@semihalf.com>
12374 Date: Mon Nov 17 15:49:32 2008 +0100
12376 cfi_flash: Add interface for flash verbosity control
12378 Add interface for flash verbosity control. It allows
12379 to disable output from low-level flash API. It is useful
12380 when calling these low-level functions from context other
12381 than flash commands (for example the MTD/CFI interface
12384 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
12385 Signed-off-by: Stefan Roese <sr@denx.de>
12387 commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
12388 Author: Piotr Ziecik <kosmo@semihalf.com>
12389 Date: Thu Nov 20 15:17:38 2008 +0100
12391 cfi_flash: Export flash_sector_size() function.
12393 Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
12394 so that it can be used in the upcoming cfi-mtd driver.
12396 Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
12397 Signed-off-by: Stefan Roese <sr@denx.de>
12399 commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
12400 Author: Stefan Roese <sr@denx.de>
12401 Date: Mon Nov 17 14:45:22 2008 +0100
12403 cfi_flash: Make all flash access functions weak
12405 This patch defines all flash access functions as weak so that
12406 they can be overridden by board specific versions.
12408 This will be used by the upcoming VCTH board support where the NOR
12409 FLASH unfortunately can't be accessed memory-mapped. Special
12410 accessor functions are needed here.
12412 To enable this weak functions you need to define
12413 CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
12414 Otherwise the "old" default functions will be used resulting
12417 Signed-off-by: Stefan Roese <sr@denx.de>
12418 Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
12420 commit a5c4067017631d903e1afa6ad615f0ce19fea517
12421 Author: Stefan Roese <sr@denx.de>
12422 Date: Mon Nov 24 08:31:16 2008 +0100
12424 UBI: Change parsing of size in commands to default to hex
12426 Currently the size parameters of the UBI commands (e.g. "ubi write") are
12427 decoded as decimal instead of hex as default. This patch now interprets
12428 all these values consistantly as hex, as all other standard U-Boot commands
12431 Signed-off-by: Stefan Roese <sr@denx.de>
12433 commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
12434 Author: Stefan Roese <sr@denx.de>
12435 Date: Fri Nov 21 13:06:06 2008 +0100
12437 ppc4xx: ML2 shouldn't include the 4xx EMAC driver
12439 Signed-off-by: Stefan Roese <sr@denx.de>
12441 commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
12442 Author: Yuri Tikhonov <yur@emcraft.com>
12443 Date: Fri Nov 14 16:19:19 2008 +0300
12445 ppc4xx: katmai: Change default config
12447 This patch enables support for EXT2, and increases the
12448 CONFIG_SYS_BOOTMAPSZ size for the default configuration
12449 of the katmai boards to use them as the RAID-reference
12452 EXT2 enabling allows one to boot kernels from the EXT2
12453 formatted Compact Flash cards.
12455 CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
12456 Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
12457 the memory area with DTB file (which is placed at the
12458 end of the bootmap area) will turn out to be overlapped
12459 with the BSS segment of the 256KB kernel, and zeroed
12460 in early_init() of Linux.
12462 Actually, increasing of the bootmap size could be done
12463 via setting of the bootm_size U-Boot variable, but it looks
12464 like the current U-Boot implementation have some bootm_size-
12465 related functionality lost. In many places through the U-Boot
12466 code the CONFIG_SYS_BOOTMAPSZ definition is used directly
12467 (instead of trying to read the corresponding value from the
12468 environment). The same is truth for the boot_jump_linux()
12469 function in lib_ppc/bootm.c, where U-Boot transfers control
12470 to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
12471 value to the booting kernel.
12473 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
12474 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12475 Signed-off-by: Stefan Roese <sr@denx.de>
12477 commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
12478 Author: Dave Mitchell <dmitch71@gmail.com>
12479 Date: Thu Nov 20 14:09:50 2008 -0600
12481 ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization
12483 Expanded OCM TLB to allow access to 64K OCM as well as 256K of
12486 Adjusted internal SRAM initialization to match updated user
12487 manual recommendation.
12489 OCM & ISRAM are now mapped as follows:
12490 physical virtual size
12491 ISRAM 0x4_0000_0000 0xE300_0000 256k
12492 OCM 0x4_0004_0000 0xE304_0000 64k
12494 A single TLB was used for this mapping.
12496 Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
12497 Signed-off-by: Stefan Roese <sr@denx.de>
12499 commit b14ca4b61a681f75f3125676e09d7ce6af66e927
12500 Author: Dave Mitchell <dmitch71@gmail.com>
12501 Date: Thu Nov 20 14:00:49 2008 -0600
12503 ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
12505 Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
12506 L2 cache DCRs from ppc440.h to this new header.
12508 Also converted these DCR defines from lowercase to uppercase and
12509 modified referencing modules to use them.
12511 Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
12512 Signed-off-by: Stefan Roese <sr@denx.de>
12514 commit 711e2b2af820d21d9931d4cf8057d3894600fd54
12515 Author: Steven A. Falco <sfalco@harris.com>
12516 Date: Thu Nov 20 14:37:57 2008 -0500
12518 ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h
12520 The definitions of bits in SDR_CFG are incorrect, and not used within
12521 U-Boot. Therefore, they can be removed.
12523 The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
12524 and are unused, so they can be removed too.
12526 A definition for SDR0_DDRCFG is added.
12528 Signed-off-by: Steven A. Falco <sfalco@harris.com>
12529 Signed-off-by: Stefan Roese <sr@denx.de>
12531 commit e23c7c95a96eb0f068efe5c532215a10a1512a95
12532 Author: Dirk Behme <dirk.behme@gmail.com>
12533 Date: Mon Nov 10 20:15:25 2008 +0100
12535 ARM: OMAP: Convert IO macros
12537 Convert IO macros to readx/writex.
12539 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
12541 commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
12542 Author: Ilko Iliev <iliev@ronetix.at>
12543 Date: Sun Nov 9 15:53:14 2008 +0100
12545 lib_arm: do_bootm_linux() - correct a small mistake
12547 This patch corrects a small bug in the "if" condition:
12548 the parameter "flag" is 0 and the "if" condition is always true.
12549 The result is - the boom command doesn't start the kernel.
12550 Affected targets: all arm based.
12552 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
12554 commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
12555 Author: Stelian Pop <stelian@popies.net>
12556 Date: Sun Nov 9 00:14:46 2008 +0100
12558 AT91: Enable PLLB for USB
12560 At least some (old ?) versions of the AT91Bootstrap do not set up the
12561 PLLB correctly to 48 MHz in order to make USB host function correctly.
12563 This patch sets up the PLLB to the same values Linux uses, and makes USB
12564 work ok on the following CPUs:
12569 This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
12570 the relevant AT91CAP9/AT91SAM9 atmel boards.
12572 Signed-off-by: Stelian Pop <stelian@popies.net>
12573 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12575 commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
12576 Author: Stelian Pop <stelian@popies.net>
12577 Date: Fri Nov 7 13:55:14 2008 +0100
12579 AT91: Use AT91_CPU_CLOCK in displays
12581 Introduce AT91_CPU_CLOCK and use it for displaying the CPU
12582 speed in the LCD driver.
12584 Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
12585 corresponding board clocks.
12587 Signed-off-by: Stelian Pop <stelian@popies.net>
12589 commit fed36ac5ae613773b6cd90e61e292c45440e10c8
12590 Author: Heiko Schocher <hs@denx.de>
12591 Date: Thu Nov 20 09:57:47 2008 +0100
12593 powerpc: 83xx: add support for the kmeter1 board
12595 This patch adds support for the kmeter1 board from Keymile,
12596 based on a Freescale MPC8360 CPU.
12598 - serial console on UART 1
12601 - Ethernet RMII Mode over UCC4
12604 Signed-off-by: Heiko Schocher <hs@denx.de>
12605 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12607 commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
12608 Author: Stefan Roese <sr@denx.de>
12609 Date: Thu Nov 20 11:46:20 2008 +0100
12611 ppc4xx: Clear all potentially pending exceptions in MCSR
12613 This is needed on Canyonlands which still has an exception pending
12614 while running relocate_code(). This leads to a failure after trap_init()
12615 is moved to the top of board_init_r().
12617 Signed-off-by: Stefan Roese <sr@denx.de>
12619 commit facdad5f2602e899a01746916beddbf9e856b5ee
12620 Author: Heiko Schocher <hs@denx.de>
12621 Date: Wed Nov 19 10:10:30 2008 +0100
12623 powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
12625 Signed-off-by: Heiko Schocher <hs@denx.de>
12626 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12628 commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
12629 Author: Howard Gregory <Greg.Howard@freescale.com>
12630 Date: Tue Nov 4 14:55:33 2008 +0800
12632 mpc83xx: Improve the performance of DDR memory
12634 modify the CAS timings. my understanding is that these
12635 settings decrease various wait times in the DDR interface.
12636 Because these wait times are in clock cycles, and the DDR
12637 clock on the 8315 RDB runs slower than on some other 83xx
12638 platforms, we can dial down these values without a problem,
12639 thereby decreasing the latency of memory a little.
12641 Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
12642 Signed-off-by: Dave Liu <daveliu@freescale.com>
12643 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12645 commit 8000b086b33a5a81f3f390f37e178db7956dc08b
12646 Author: Kyungmin Park <kyungmin.park@samsung.com>
12647 Date: Fri Oct 24 14:55:33 2008 +0200
12649 ARM: Add Apollon UBI support
12651 To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
12654 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12655 Signed-off-by: Stefan Roese <sr@denx.de>
12657 commit 694a0b3f1c0accd0de94b89555155d69f8022824
12658 Author: Kyungmin Park <kyungmin.park@samsung.com>
12659 Date: Wed Nov 19 11:47:05 2008 +0100
12661 UBI: Add UBI command support
12663 This patch adds these UBI commands:
12665 ubi part [nand|onenand] [part] - Show or set current partition
12666 ubi info [l[ayout]] -Display volume and UBI layout information
12667 ubi create[vol] volume [size] [type] - Create volume name with size
12668 ubi write[vol] address volume size - Write volume from address with size
12669 ubi read[vol] address volume [size] - Read volume to address with size
12670 ubi remove[vol] volume - Remove volume
12672 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12673 Signed-off-by: Stefan Roese <sr@denx.de>
12675 commit 58be3a1056d88c6d05f3e914389282807e69923a
12676 Author: Kyungmin Park <kyungmin.park@samsung.com>
12677 Date: Wed Nov 19 16:38:24 2008 +0100
12679 UBI: Add basic UBI support to U-Boot (Part 8/8)
12681 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
12682 It's based on the Linux UBI version and basically has a "OS"
12683 translation wrapper that defines most Linux specific calls
12684 (spin_lock() etc.) into no-ops. Some source code parts have been
12685 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
12686 this version with the Linux version and simplifies future UBI
12687 ports/bug-fixes from the Linux version.
12689 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12690 Signed-off-by: Stefan Roese <sr@denx.de>
12692 commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
12693 Author: Kyungmin Park <kyungmin.park@samsung.com>
12694 Date: Wed Nov 19 16:36:36 2008 +0100
12696 UBI: Add basic UBI support to U-Boot (Part 7/8)
12698 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
12699 It's based on the Linux UBI version and basically has a "OS"
12700 translation wrapper that defines most Linux specific calls
12701 (spin_lock() etc.) into no-ops. Some source code parts have been
12702 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
12703 this version with the Linux version and simplifies future UBI
12704 ports/bug-fixes from the Linux version.
12706 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12707 Signed-off-by: Stefan Roese <sr@denx.de>
12709 commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
12710 Author: Kyungmin Park <kyungmin.park@samsung.com>
12711 Date: Wed Nov 19 16:32:36 2008 +0100
12713 UBI: Add basic UBI support to U-Boot (Part 6/8)
12715 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
12716 It's based on the Linux UBI version and basically has a "OS"
12717 translation wrapper that defines most Linux specific calls
12718 (spin_lock() etc.) into no-ops. Some source code parts have been
12719 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
12720 this version with the Linux version and simplifies future UBI
12721 ports/bug-fixes from the Linux version.
12723 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12724 Signed-off-by: Stefan Roese <sr@denx.de>
12726 commit c91a719daa331b5856109313371e4ece5ec06d96
12727 Author: Kyungmin Park <kyungmin.park@samsung.com>
12728 Date: Wed Nov 19 16:28:06 2008 +0100
12730 UBI: Add basic UBI support to U-Boot (Part 5/8)
12732 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
12733 It's based on the Linux UBI version and basically has a "OS"
12734 translation wrapper that defines most Linux specific calls
12735 (spin_lock() etc.) into no-ops. Some source code parts have been
12736 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
12737 this version with the Linux version and simplifies future UBI
12738 ports/bug-fixes from the Linux version.
12740 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12741 Signed-off-by: Stefan Roese <sr@denx.de>
12743 commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
12744 Author: Kyungmin Park <kyungmin.park@samsung.com>
12745 Date: Wed Nov 19 16:27:23 2008 +0100
12747 UBI: Add basic UBI support to U-Boot (Part 4/8)
12749 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
12750 It's based on the Linux UBI version and basically has a "OS"
12751 translation wrapper that defines most Linux specific calls
12752 (spin_lock() etc.) into no-ops. Some source code parts have been
12753 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
12754 this version with the Linux version and simplifies future UBI
12755 ports/bug-fixes from the Linux version.
12757 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12758 Signed-off-by: Stefan Roese <sr@denx.de>
12760 commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
12761 Author: Kyungmin Park <kyungmin.park@samsung.com>
12762 Date: Wed Nov 19 16:26:54 2008 +0100
12764 UBI: Add basic UBI support to U-Boot (Part 3/8)
12766 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
12767 It's based on the Linux UBI version and basically has a "OS"
12768 translation wrapper that defines most Linux specific calls
12769 (spin_lock() etc.) into no-ops. Some source code parts have been
12770 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
12771 this version with the Linux version and simplifies future UBI
12772 ports/bug-fixes from the Linux version.
12774 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12775 Signed-off-by: Stefan Roese <sr@denx.de>
12777 commit 961df83361aff9a14f226214224eb8a06e05ba24
12778 Author: Kyungmin Park <kyungmin.park@samsung.com>
12779 Date: Wed Nov 19 16:25:44 2008 +0100
12781 UBI: Add basic UBI support to U-Boot (Part 2/8)
12783 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
12784 It's based on the Linux UBI version and basically has a "OS"
12785 translation wrapper that defines most Linux specific calls
12786 (spin_lock() etc.) into no-ops. Some source code parts have been
12787 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
12788 this version with the Linux version and simplifies future UBI
12789 ports/bug-fixes from the Linux version.
12791 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12792 Signed-off-by: Stefan Roese <sr@denx.de>
12794 commit f399d4a281713d5ef2d764f05d545fe61e3bd569
12795 Author: Kyungmin Park <kyungmin.park@samsung.com>
12796 Date: Wed Nov 19 16:23:06 2008 +0100
12798 UBI: Add basic UBI support to U-Boot (Part 1/8)
12800 This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
12801 It's based on the Linux UBI version and basically has a "OS"
12802 translation wrapper that defines most Linux specific calls
12803 (spin_lock() etc.) into no-ops. Some source code parts have been
12804 uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
12805 this version with the Linux version and simplifies future UBI
12806 ports/bug-fixes from the Linux version.
12808 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12809 Signed-off-by: Stefan Roese <sr@denx.de>
12811 commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
12812 Author: Kyungmin Park <kyungmin.park@samsung.com>
12813 Date: Wed Nov 19 16:20:36 2008 +0100
12815 MTD: Add MTD paritioning infrastructure
12817 This MTD part infrastructure will be used by the upcoming
12820 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
12821 Signed-off-by: Stefan Roese <sr@denx.de>
12823 commit 9b827cf1720acda2473afa516956eab6f7cca9a1
12824 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
12825 Date: Thu Oct 16 22:54:03 2008 +0530
12827 Align end of bss by 4 bytes
12829 Most of the bss initialization loop increments 4 bytes
12830 at a time. And the loop end is checked for an 'equal'
12831 condition. Make the bss end address aligned by 4, so
12832 that the loop will end as expected.
12834 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
12835 Signed-off-by: Wolfgang Denk <wd@denx.de>
12837 commit 3f510db522d160179dff3ddcce9b18f6241c2c24
12838 Author: Becky Bruce <becky.bruce@freescale.com>
12839 Date: Mon Nov 10 19:45:35 2008 -0600
12841 mpc8641: fix address-cells default in old .dts detection
12843 address-cells defaults to 2, not 1; so in the unlikely
12844 event that it isn't specified, this patch is required
12845 for correct operation.
12847 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12849 commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
12850 Author: Becky Bruce <becky.bruce@freescale.com>
12851 Date: Fri Oct 31 17:14:39 2008 -0500
12853 lib_ppc: Move trap_init to occur earlier
12855 Doing trap_init immediately once we're running from RAM
12856 means we're no longer dependent on the physical location of
12857 the flash on non-BookE platforms. Before trap_init, those
12858 platforms switch to real mode and go to 0xfff00100 on exception.
12859 After the switch, they go to 0x00000100 This makes it easier to
12860 move the flash location.
12862 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12864 commit d52082b12c6e545705a19433a2f4142526536189
12865 Author: Becky Bruce <becky.bruce@freescale.com>
12866 Date: Fri Nov 7 13:46:19 2008 -0600
12868 mpc8641: Try to detect old .dts files
12870 Since we've changed the memory map of the board, be nice and
12871 add some checking to try to catch out-of-date .dts files. We do
12872 this by checking the CCSRBAR location in the .dts and comparing
12873 it to the CCSRBAR location in u-boot. If they don't match, a
12874 warning msg is printed. This isn't foolproof, but it's simple and
12875 will catch most of the cases where an out-of-date .dts is present,
12876 including all of the cases where a new u-boot is used with an old
12877 standard MPC8641 .dts file as supplied with Linux.
12879 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12881 commit 8db0400a27839f91c047dcb83f4a0f09e054a180
12882 Author: Becky Bruce <becky.bruce@freescale.com>
12883 Date: Thu Nov 6 13:04:09 2008 -0600
12885 toplevel Makefile: Add MPC8641HPCN_36BIT target
12887 This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
12889 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12891 commit 3111d32c494e8251b90917447796a7206b757e1e
12892 Author: Becky Bruce <becky.bruce@freescale.com>
12893 Date: Thu Nov 6 17:37:35 2008 -0600
12895 mpc8641: Support 36-bit physical addressing
12897 This patch creates a memory map with all the devices
12898 in 36-bit physical space, in addition to the 32-bit map.
12899 The CCSR relocation is moved (again, sorry) to
12900 allow for the physical address to be 36 bits - this
12901 requires translation to be enabled. With 36-bit physical
12902 addressing enabled, we are no longer running with VA=PA
12903 translations. This means we have to distinguish between
12904 the two in the config file. The existing region name is
12905 used to indicate the virtual address, and a _PHYS variety
12906 is created to represent the physical address.
12908 Large physical addressing is not enabled by default.
12909 Set CONFIG_PHYS_64BIT in the config file to turn this on.
12911 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12913 commit c759a01a0022de9378a3a761f49786f87684c916
12914 Author: Becky Bruce <becky.bruce@freescale.com>
12915 Date: Thu Nov 6 17:36:04 2008 -0600
12917 mpc8641: Change 32-bit memory map
12919 The memory map on the 8641hpcn is modified to look more like
12920 the 85xx boards; this is a step towards a more standardized
12921 layout going forward. As part of this change, we now relocate
12924 The regions for some of the mappings were far larger than they
12925 needed to be. I have reduced the mappings to match the
12926 actual sizes supported by the hardware.
12928 In addition I have removed the comments at the head
12929 of the BAT blocks in the config file, rather than updating
12930 them. These get horribly out of date, and it's a simple
12931 matter to look at the defines to see what they are set to
12932 since everything is right here in the same file.
12934 Documentation has been changed to reflect the new map, as this
12935 change is user visible, and affects the OS which runs post-uboot.
12937 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12939 commit bf9a8c34309ed9276258295db9e9212aabb2531a
12940 Author: Becky Bruce <becky.bruce@freescale.com>
12941 Date: Wed Nov 5 14:55:35 2008 -0600
12943 mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
12945 We define CONFIG_MONITOR_BASE_EARLY to define the initial location
12946 of the bootpage in flash. Use this to create an early mapping
12947 definition for the FLASH, and change the early_bats code to use this.
12949 This change facilitates the relocation of the flash since the early
12950 mappings are no longer tied to the final location of the flash.
12952 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12954 commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
12955 Author: Becky Bruce <becky.bruce@freescale.com>
12956 Date: Wed Nov 5 14:55:34 2008 -0600
12958 mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
12960 Using a mtmsr/blr means that you have to be executing at the
12961 same virtual address once you enable translation. This is
12962 unnecessarily restrictive, and is not really how this is
12963 usually done. Change it to use the more common mtspr SRR0/SRR1
12966 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12968 commit 6bf98b1362f0cb237620355ed3e6762fff82388d
12969 Author: Becky Bruce <becky.bruce@freescale.com>
12970 Date: Wed Nov 5 14:55:33 2008 -0600
12972 mpc8641: make DIAG_ADDR == FLASH_BASE
12974 Currently, that's what it is, but it's hardcoded.
12976 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12978 commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
12979 Author: Becky Bruce <becky.bruce@freescale.com>
12980 Date: Wed Nov 5 14:55:32 2008 -0600
12982 mpc8641: Drop imaginary second flash bank, map 8MB
12984 There's a lot of setup and foo for the second flash
12985 bank. The problem is, this board doesn't actually have one.
12986 Clean this up. Also, the flash is 8M in size. Get rid
12987 of the confusing aliased overmapping, and just map 8M.
12989 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12991 commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
12992 Author: Becky Bruce <becky.bruce@freescale.com>
12993 Date: Wed Nov 5 14:55:31 2008 -0600
12995 mpc8641: only define CONFIG_ENV_SIZE once
12997 It's currently defined twice inside in an if/else block, but
12998 both halves set the same value. Move the define outside
13001 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13003 commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
13004 Author: Becky Bruce <becky.bruce@freescale.com>
13005 Date: Wed Nov 5 14:55:30 2008 -0600
13007 mpc86xx: Move setup_bats into cpu_init_f
13009 In order to later allow for a physical relocation of the
13010 flash, setup_bats, which sets up the final BAT mapping
13011 for the board, needs to happen *after* init_laws().
13012 Otherwise, there will be no window programmed for the flash
13013 at the new physical location at the point when we change
13014 the mmu translation.
13016 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13018 commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
13019 Author: Becky Bruce <becky.bruce@freescale.com>
13020 Date: Wed Nov 5 14:55:29 2008 -0600
13022 mpc8641: Remove extra "0" from BR2 define
13024 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13026 commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
13027 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
13028 Date: Thu Oct 23 09:08:18 2008 -0400
13030 drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.
13032 Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
13033 This adds support for PHY-less MAC connections to the UEC.
13035 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
13036 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13038 commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
13039 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13040 Date: Thu Oct 23 16:27:24 2008 +0000
13042 ColdFire: Add mii driver in drivers/net
13044 All CF platforms' mii.c are consolidated into one
13046 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13047 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13049 commit 25a859066b3af1070eb69f12022113c0a91bd813
13050 Author: Ben Warren <biggerbadderben@gmail.com>
13051 Date: Mon Oct 27 23:53:17 2008 -0700
13053 Moved initialization of PPC4xx EMAC to cpu_eth_init()
13055 Removed initialization of the driver from net/eth.c
13057 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13058 Acked-by: Stefan Roese <sr@denx.de>
13060 commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
13061 Author: Ben Warren <biggerbadderben@gmail.com>
13062 Date: Sun Nov 9 21:29:23 2008 -0800
13064 Moved PPC4xx EMAC driver to drivers/net
13066 Also changed path in all linker scripts that reference this driver
13068 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13069 Acked-by: Stefan Roese <sr@denx.de>
13071 commit 96e21f86e8266ed40759e5495ee461265d7f6d28
13072 Author: Ben Warren <biggerbadderben@gmail.com>
13073 Date: Mon Oct 27 23:50:15 2008 -0700
13075 Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
13077 All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
13079 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13080 Acked-by: Stefan Roese <sr@denx.de>
13082 commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
13083 Author: Ben Warren <biggerbadderben@gmail.com>
13084 Date: Thu Oct 23 22:02:49 2008 -0700
13086 Moved initialization of MPC8XX SCC to cpu_eth_init()
13088 Removed initialization of the driver from net/eth.c
13090 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13092 commit a9bec96d6359ac9f90a852962bf3040cad9e0256
13093 Author: Ben Warren <biggerbadderben@gmail.com>
13094 Date: Wed Oct 22 23:47:51 2008 -0700
13096 Moved initialization of MPC8220 FEC to cpu_eth_init()
13098 Removed initialization of the driver from net/eth.c
13100 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13102 commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
13103 Author: Ben Warren <biggerbadderben@gmail.com>
13104 Date: Wed Oct 22 23:32:48 2008 -0700
13106 Moved initialization of QE Ethernet controller to cpu_eth_init()
13108 Removed initialization of the driver from net/eth.c
13110 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13112 commit 3456a148276d5494b53ee40242efb6462d163504
13113 Author: Ben Warren <biggerbadderben@gmail.com>
13114 Date: Wed Oct 22 23:20:29 2008 -0700
13116 Moved initialization of FCC Ethernet controller to cpu_eth_init
13119 Several MPC8xx boards
13120 Several MPC8260/MPC8272 boards
13121 Several MPC85xx boards
13123 Removed initialization of the driver from net/eth.c
13125 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13127 commit 62e15b497f5c6334c059512678c8db7940ae4c61
13128 Author: Ben Warren <biggerbadderben@gmail.com>
13129 Date: Thu Oct 30 22:15:35 2008 -0700
13131 Fix typo in cpu/mpc85xx/cpu.c
13133 CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC
13135 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13137 commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
13138 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13139 Date: Sun Oct 19 12:08:50 2008 +0900
13141 net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
13143 This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
13144 as a part of ongoing eth_initialize cleanup work. The function ret value
13145 is also fixed as it should be negative on fail.
13147 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13148 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13150 commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
13151 Author: Ben Warren <biggerbadderben@gmail.com>
13152 Date: Fri Sep 5 01:55:22 2008 -0400
13154 Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
13156 Also, removed the driver initialization from net/eth.c
13158 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13160 commit f2a7806fc23e82d30c8548911369e0c530607354
13161 Author: Clive Stubbings <uboot@xentech.co.uk>
13162 Date: Mon Oct 27 15:05:00 2008 +0000
13164 xilinx_emaclite buffer overrun
13166 Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
13167 PKTSIZE_ALIGN bytes long.
13169 Acked-by: Michal Simek <monstr@monstr.eu>
13171 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13173 commit 0115b1953718a2969f6469d3d5da51ba11e12d42
13174 Author: richardretanubun <richardretanubun@ruggedcom.com>
13175 Date: Fri Sep 26 08:59:12 2008 -0400
13177 NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.
13179 The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
13180 This patch makes these function use the devname argument that is passed in to
13181 allow access to the phy registers of other devices in devlist[].
13183 Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
13185 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13187 commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
13188 Author: richardretanubun <richardretanubun@ruggedcom.com>
13189 Date: Mon Oct 6 15:31:43 2008 -0400
13191 Adds two more ethernet interface to 83xx
13193 Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
13194 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
13195 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
13197 commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
13198 Author: Stelian Pop <stelian@popies.net>
13199 Date: Fri Nov 7 13:54:31 2008 +0100
13201 AT91: Replace AT91_BASE_EMAC by the board specific values.
13203 AT91_BASE_EMAC is never used outside the board specific files,
13204 so replace its usage by the board specific AT91xxx_BASE_EMAC.
13206 Signed-off-by: Stelian Pop <stelian@popies.net>
13207 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13209 commit c91e17affa175ce06afa89b04752301eb4a61666
13210 Author: Stelian Pop <stelian@popies.net>
13211 Date: Fri Nov 7 12:09:21 2008 +0100
13213 AT91: Replace (undefined) AT91_ID_US* by the board specific values.
13215 AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
13216 Since they are never used outside the board specific files, they can
13217 be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
13220 Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.
13222 Signed-off-by: Stelian Pop <stelian@popies.net>
13223 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13225 commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
13226 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13227 Date: Sat Nov 1 10:47:59 2008 +0100
13229 Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
13231 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13233 commit 1079432e04ccf71aa3684181186182cd63512f19
13234 Author: Sergey Lapin <slapin@ossfans.org>
13235 Date: Fri Oct 31 12:28:43 2008 +0100
13237 Custom AFEB9260 board support
13239 This patch provides support for AFEB9260 board, a product of
13240 OpenSource hardware and software. Some commertial projects
13241 are made with this design. A board is basically AT91SAM9260-EK
13242 with some modifications and different peripherals and different
13243 parts used. Main purpose of this project is to gain experience in
13245 More info: http://groups.google.com/group/arm9fpga-evolution-board
13246 (In Russian only, sorry).
13247 Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
13249 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
13251 commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
13252 Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
13253 Date: Tue Oct 21 13:17:16 2008 +0900
13255 Change to use "do_div" macro
13257 Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
13259 commit e352495318d8056a00faa21b633b3e4374bfbf52
13260 Author: Roman Mashak <romez777@gmail.com>
13261 Date: Wed Oct 22 16:00:26 2008 -0400
13263 ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
13265 OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
13266 It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap
13268 Signed-off-by: Roman Mashak <romez777@gmail.com>
13270 commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
13271 Author: Roman Mashak <romez777@gmail.com>
13272 Date: Tue Oct 21 03:01:41 2008 -0700
13274 ARM/Versatile port: Removed unused functions
13276 Removal of never used functions.
13278 Signed-off-by: Roman Mashak <romez777@gmail.com>
13280 commit 1266df887781c779deaf6d05eea2ef90a470cb34
13281 Author: Becky Bruce <becky.bruce@freescale.com>
13282 Date: Mon Nov 3 15:44:01 2008 -0600
13284 powerpc: change 86xx SMP boot method
13286 We put the bootpg for the secondary cpus into memory and use
13287 BPTR to get to it. This is a step towards converting to the
13288 ePAPR boot methodology. Also, the code is written to
13289 deal properly with more than 4GB of RAM.
13291 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13293 commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
13294 Author: Becky Bruce <becky.bruce@freescale.com>
13295 Date: Fri Oct 31 17:13:49 2008 -0500
13297 8641HPCN: Config file cleanup
13299 There are several items in the config file that were hardcoded
13300 but that should really be based on other config options, since
13301 the regions are contiguous and depend on being so. This cleans
13302 that up a bit. Also, add BR_PHYS_ADDR() macro to convert
13303 addresses into the proper format for BR registers.
13305 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13307 commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
13308 Author: Becky Bruce <becky.bruce@freescale.com>
13309 Date: Fri Oct 31 17:13:32 2008 -0500
13311 86xx: Make dram_size a phys_size_t
13313 It's currently a long and should be phys_size_t.
13315 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13317 commit 104992fc541302a6bac74448e01e7fdad20abca0
13318 Author: Becky Bruce <becky.bruce@freescale.com>
13319 Date: Sun Nov 2 18:19:32 2008 -0600
13321 powerpc 86xx: Handle CCSR relocation earlier
13323 Currently, the CCSR gets relocated while translation is
13324 enabled, meaning we need 2 BAT translations to get to both the
13325 old location and the new location. Also, the DEFAULT
13326 CCSR location has a dependency on the BAT that maps the
13327 FLASH region. Moving the relocation removes this unnecessary
13328 dependency. This makes it easier and more intutive to
13329 modify the board's memory map.
13331 Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
13332 BAT for CCSR space.
13334 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13336 commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
13337 Author: Becky Bruce <becky.bruce@freescale.com>
13338 Date: Fri Oct 31 17:14:14 2008 -0500
13340 mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
13342 You can't actually have both, and with some coming changes to
13343 change the memory map for the board and support 36-bit physical,
13344 we need the extra BAT that is being consumed by having both.
13346 I also make non-PCI configs build cleanly, for the sake of sanity.
13348 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13350 commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
13351 Author: Becky Bruce <becky.bruce@freescale.com>
13352 Date: Fri Oct 31 17:14:00 2008 -0500
13354 mpc8641: Stop supporting non-PCI_PNP configs
13356 We don't actually ever do this, remove the code so we
13357 can stop maintaining it.
13359 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
13361 commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
13362 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13363 Date: Fri Oct 24 12:59:12 2008 +0000
13365 ColdFire: Fix M5329EVB and M5373EVB nand issue
13367 Fix compilation issue caused by a few mismatches.
13368 Provide proper nand chip select enable/disable in
13369 nand_hwcontrol() rather than in board_nand_init()
13370 just enable once. Remove redundant local nand driver
13371 functions - nand_read_byte(), nand_write_byte() and
13372 nand_dev_ready() to use common nand driver.
13374 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13376 commit 1b2708442224a551a0b865b52710306333888932
13377 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13378 Date: Wed Oct 22 11:55:30 2008 +0000
13380 ColdFire: Fix compilation error
13382 The error was caused by the change for strmhz() in cpu.c.
13383 A few of them were one extra close parenthesis.
13385 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13387 commit 536e7dac16769954915a484e682a2efb28699133
13388 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13389 Date: Wed Oct 22 11:38:21 2008 +0000
13391 ColdFire: Add MCF5301x CPU and M53017EVB support
13393 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13395 commit a21d0c2cc9add8894d971ab791f4032f077db817
13396 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13397 Date: Tue Oct 21 15:37:02 2008 +0000
13399 ColdFire: Add SBF support for M52277EVB
13401 Add serial boot support
13403 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13405 commit b202816c61042c183fe67d097a5893b0f2dafba0
13406 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13407 Date: Tue Oct 21 14:19:26 2008 +0000
13409 ColdFire: Use CFI driver for M5272C3
13411 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13413 commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
13414 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13415 Date: Tue Oct 21 13:47:54 2008 +0000
13417 ColdFire: Relocate FEC's GPIO and mii functions protocols
13419 Place FEC pin assignments in cpu_init.c from platform's
13422 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13424 commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
13425 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13426 Date: Tue Oct 21 12:15:44 2008 +0000
13428 ColdFire: Remove platforms mii.c file
13430 Will use mcfmii.c driver in drivers/net rather than
13431 keep creating new mii.c for each future platform.
13432 Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
13433 M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
13434 M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
13437 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13439 commit 012522fef3b382469125beb46a315ab4dee02fb0
13440 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13441 Date: Tue Oct 21 10:03:07 2008 +0000
13443 ColdFire: Modules header files cleanup
13445 Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
13446 MDHA, SKHA, INTC, and FlexBus structures and
13447 definitions in immap_5xxx.h to more unify modules
13448 header files. Append DSPI support for m547x_8x.
13449 SSI cleanup. Remove USB Host structure from immap_539.h.
13450 Apply changes to use FlexBus structures in mcf52x2's
13451 cpu_init.c and platform configuration files.
13453 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13455 commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
13456 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13457 Date: Tue Oct 21 08:52:36 2008 +0000
13459 ColdFire: Remove linker file
13461 Each different build for M54455EVB and M5235EVB will
13462 create a u-boot.lds linker file. It is redundant to
13463 keep the u-boot.lds
13465 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13467 commit 0829323073c505556ed5f5073f91adb504584d45
13468 Author: Peter Tyser <ptyser@xes-inc.com>
13469 Date: Fri Oct 31 11:26:44 2008 -0500
13471 ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
13473 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
13475 commit a80b21d5127583171d6e9bc7f722947641898012
13476 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13477 Date: Fri Oct 31 12:12:12 2008 +0100
13479 common/Makefile: create others group for non core, environment and command files
13481 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13483 commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
13484 Author: Wolfgang Denk <wd@denx.de>
13485 Date: Fri Oct 31 01:13:37 2008 +0100
13487 TQM8260: use CFI flash driver instead of custom driver.
13489 Signed-off-by: Wolfgang Denk <wd@denx.de>
13491 commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
13492 Author: Andy Fleming <afleming@freescale.com>
13493 Date: Thu Oct 30 17:35:30 2008 -0500
13495 Consolidate MAX/MIN definitions
13497 There were several, now there is one (two if you count the lower-case
13500 Signed-off-by: Andy Fleming <afleming@freescale.com>
13502 commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
13503 Author: Heiko Schocher <hs@denx.de>
13504 Date: Thu Oct 30 09:23:09 2008 +0100
13506 mgsuvd: remove unused defines in config file.
13508 Signed-off-by: Heiko Schocher <hs@denx.de>
13510 commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
13511 Author: Wolfgang Denk <wd@denx.de>
13512 Date: Sun Nov 2 16:14:22 2008 +0100
13514 Coding Style cleanup, update CHANGELOG
13516 Signed-off-by: Wolfgang Denk <wd@denx.de>
13518 commit a47f957ab523019992fdef857af01bd71c58a4da
13519 Author: Alessandro Rubini <rubini-list@gnudd.com>
13520 Date: Fri Oct 31 22:33:21 2008 +0100
13522 NAND: Allow NAND and OneNAND to coexist
13524 This removes in nand.h code that is verbatim duplicated from bbm.h,
13525 including directly bbm.h in nand.h. The previous state of affairs
13526 prevented compiling code for a board hosting both NAND and OneNAND chips.
13528 Reported-by: Scott Wood <scottwood@freescale.com>
13529 Signed-off-by: Alessandro Rubini <rubini@unipv.it>
13530 Signed-off-by: Scott Wood <scottwood@freescale.com>
13532 commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214
13533 Author: Scott Wood <scottwood@freescale.com>
13534 Date: Fri Oct 31 13:51:12 2008 -0500
13536 JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.
13538 Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
13539 Signed-off-by: Scott Wood <scottwood@freescale.com>
13541 commit c57fc28947e248fb03c49a28b467686299895055
13542 Author: Jason Jin <Jason.Jin@freescale.com>
13543 Date: Fri Oct 31 05:07:04 2008 -0500
13545 NAND: Add NAND support for MPC8536DS board
13547 This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000
13548 for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file.
13549 It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image.
13551 Singed-off-by: Jason Jin <Jason.Jin@freescale.com>
13552 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
13553 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13555 commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b
13556 Author: Haiying Wang <Haiying.Wang@freescale.com>
13557 Date: Fri Oct 31 05:06:14 2008 -0500
13559 NAND: Fix CONFIG_ENV_ADDR for MPC8572DS
13561 CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE).
13563 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
13564 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13566 commit 51b572a801be57790fe26adaa530210e7fba59cc
13567 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13568 Date: Fri Oct 24 10:49:48 2008 +0900
13570 sh: rsk7203: Moved rsk7203 board to board/renesas
13572 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13574 commit 58453b00b3ebb26aaa901210023f99504a90bb00
13575 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13576 Date: Fri Oct 24 10:48:31 2008 +0900
13578 sh: MigoR: Moved MigoR board to board/renesas
13580 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13582 commit c1da2a22817ba85b437afa2f4e715e658b219fd1
13583 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13584 Date: Fri Oct 24 10:39:44 2008 +0900
13586 sh: r2dplus: Moved r2dplus board to board/renesas
13588 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13590 commit 78385bf2359d828184d0b3649f7ae6b933420000
13591 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13592 Date: Fri Oct 24 10:36:13 2008 +0900
13594 sh: sh7763rdp: Moved sh7763rdp board to board/renesas
13596 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13598 commit c6525d459c350bfc246ea7826456af77e1e314eb
13599 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13600 Date: Fri Oct 24 10:35:19 2008 +0900
13602 sh: sh7785lcr: Moved sh7785lcr board to board/renesas
13604 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13606 commit acd3e30d09a73f876222f0d496c4f52ee9d0771d
13607 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13608 Date: Fri Oct 24 10:34:21 2008 +0900
13610 sh: r7780mp: Moved r7780mp board to board/renesas
13612 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13614 commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0
13615 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13616 Date: Fri Oct 24 10:32:14 2008 +0900
13618 sh: ap325rxa: Moved ap325rxa board to board/renesas
13620 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
13622 commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad
13623 Author: Wolfgang Denk <wd@xpert.denx.de>
13624 Date: Fri Oct 31 01:12:28 2008 +0100
13626 CFI Driver: Fix "flash not ready" problem
13628 This patch fixes a problem on systems where the NOR flash is attached
13629 to a 64 bit bus. The toggle bit detection in flash_toggle() is based
13630 on the assumption that the same flash address is read twice without
13631 any other interjacent flash accesses. However, on 32 bit systems the
13632 function flash_read64() [as currently implemented] does not perform
13633 an atomic 64 bit read - instead, this is broken down into two 32 bit
13634 read accesses on addresses "addr" and "addr + 4". So instead of
13635 reading a 64 bit value twice from "addr", we see a sequence of 4 32
13636 bit reads from "addr", "addr + 4", "addr", and "addr + 4". The
13637 consequence is that flash_toggle() fails to work.
13639 This patch implements a simple, but somewhat ugly solution, as it
13640 avoids the use of flash_read64() in this critical place (by breaking
13641 it down manually into 32 bit read operations) instead of rewriting
13642 flash_read64() such to perform atomic 64 bit reads as one could
13643 expect. However, such a rewrite would require the use of floating
13644 point load operations, which becomes pretty complex:
13647 set Floating Point Enable bit in MSR;
13648 use "lfd" instruction to perform atomic 64 bit read;
13649 use "stfd" to store value to temporary variable on stack;
13650 load u64 value from temporary variable;
13654 The benefit-cost ratio of such an implementation was considered too
13655 bad to actually attempt this, especially as we can expect that such
13656 an implementation would not only have a bigger memory footprint but
13657 also cause a performance degradation.
13659 Signed-off-by: Wolfgang Denk <wd@denx.de>
13660 Signed-off-by: Stefan Roese <sr@denx.de>
13662 commit cdd4fe63b094d4b767f12ff241d72566b461ee61
13663 Author: Stefan Roese <sr@denx.de>
13664 Date: Fri Oct 31 10:48:08 2008 +0100
13666 ppc4xx: Fix spelling error in MAINTAINERS file
13668 Signed-off-by: Stefan Roese <sr@denx.de>
13670 commit be270798900b75ad9c47c7b79c72f70441196c56
13671 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13672 Date: Tue Oct 28 13:37:00 2008 +0100
13674 ppc4xx: Update PMC440 board support
13676 This patch brings PMC440 board support up to date:
13678 - fix GPIO configuration
13679 - add misc_init_f()
13680 - use better values for usbact variable
13681 - fix USB 2.0 phy reset sequence
13682 - shrink BAR2 to save PCI address space
13685 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13686 Signed-off-by: Stefan Roese <sr@denx.de>
13688 commit 75183b1a7fc04206d9779d13f16e03853d7e965d
13689 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13690 Date: Tue Oct 28 13:36:59 2008 +0100
13692 ppc4xx: Fix PMC440 BSP commands
13694 This patch fixes the PMC440 BSP commands painit and selfreset
13696 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13697 Signed-off-by: Stefan Roese <sr@denx.de>
13699 commit 76b565b69f886d5ae748db65e44f464b0e70d41a
13700 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13701 Date: Tue Oct 28 13:36:58 2008 +0100
13703 ppc4xx: Update PMC440 board configuration
13705 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13706 Signed-off-by: Stefan Roese <sr@denx.de>
13708 commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4
13709 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13710 Date: Tue Oct 28 13:36:57 2008 +0100
13712 ppc4xx: Fix esd loadpci command
13714 This patch fixes esd's loadpci command when not all
13715 memory on adapter boards is accessable via PCI.
13717 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13718 Signed-off-by: Stefan Roese <sr@denx.de>
13720 commit 492aa9ea13791ca4591b5bde895a425e27ae2d10
13721 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13722 Date: Tue Oct 28 13:36:56 2008 +0100
13724 ppc4xx: Clean up PMC440 header
13726 -Codingstyle cleanup
13727 -Remove unused GPIO define
13729 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13730 Signed-off-by: Stefan Roese <sr@denx.de>
13732 commit 295133258a44f97a57fb2ec339aecfda11f4db95
13733 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13734 Date: Tue Oct 28 13:36:55 2008 +0100
13736 ppc4xx: Handle other board variant in PMC440 FPGA code
13738 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
13739 Signed-off-by: Stefan Roese <sr@denx.de>
13741 commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0
13742 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
13743 Date: Mon Oct 27 12:35:59 2008 +0100
13745 ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
13747 Xilinx ppc440 and ppc405 have many similarities. This patch merge the
13748 config files of both infrastuctures
13750 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
13751 Signed-off-by: Stefan Roese <sr@denx.de>
13753 commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2
13754 Author: Stefan Roese <sr@denx.de>
13755 Date: Sat Oct 25 06:45:31 2008 +0200
13757 ppc4xx: Correctly configure the GPIO pin muxing on Arches
13759 Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
13760 pin multiplexing correctly
13762 Signed-off-by: Stefan Roese <sr@denx.de>
13764 commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c
13765 Author: Bartlomiej Sieka <tur@semihalf.com>
13766 Date: Thu Oct 30 23:22:04 2008 +0100
13768 Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX)
13770 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
13772 commit 4bc7deee9095f21e243b724ca3d634251c1d5432
13773 Author: David Gibson <david@gibson.dropbear.id.au>
13774 Date: Wed Oct 29 23:27:45 2008 -0500
13776 libfdt: Fix bug in fdt_subnode_offset_namelen()
13778 There's currently an off-by-one bug in fdt_subnode_offset_namelen()
13779 which causes it to keep searching after it's finished the subnodes of
13780 the given parent, and into the subnodes of siblings of the original
13781 node which come after it in the tree.
13783 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
13784 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13786 commit f242a08871839eac081ba5b599af979f3a148a0d
13787 Author: Peter Korsgaard <jacmet@sunsite.dk>
13788 Date: Tue Oct 28 08:26:52 2008 +0100
13790 fdt_resize(): ensure minimum padding
13792 fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry
13793 (16 bytes), so make sure that fdt_resize at least adds that much
13794 padding, no matter what the location or size of the fdt is.
13796 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
13797 Acked-by: Andy Fleming <afleming@freescale.com>
13799 commit d685b74c64a38849f1a129b3ab846fbf67dd937e
13800 Author: Dave Liu <daveliu@freescale.com>
13801 Date: Thu Oct 23 21:59:35 2008 +0800
13803 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
13805 The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
13807 mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
13809 This is needed in unlock_ram_in_cache() because it is called from C and
13810 will corrupt the small data area anchor that is kept in R2.
13812 lock_ram_in_cache() is modified similarly as good coding practice, but
13813 is not called from C.
13815 Signed-off-by: Nick Spence <nick.spence@freescale.com>
13817 also, the r2 is used as global data pointer.
13819 Signed-off-by: Dave Liu <daveliu@freescale.com>
13821 commit e053ab1903ccae6048ef759025b9f675bba91450
13822 Author: Scott Wood <scottwood@freescale.com>
13823 Date: Tue Oct 28 11:45:04 2008 -0500
13825 mpc83xx pci: Round up memory size in inbound window.
13827 The current calculation will fail to cover all memory if
13828 its size is not a power of two.
13830 Signed-off-by: Scott Wood <scottwood@freescale.com>
13831 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13833 commit 1c671977dc81359628be27ac99c174e76e8069ba
13834 Author: Dave Liu <daveliu@freescale.com>
13835 Date: Thu Oct 23 21:19:13 2008 +0800
13837 86xx: remove the unused definition
13839 Signed-off-by: Dave Liu <daveliu@freescale.com>
13841 commit eaa44c5dc83756c3067b9e6c9db626facd0b0660
13842 Author: Dave Liu <daveliu@freescale.com>
13843 Date: Tue Oct 28 17:47:49 2008 +0800
13845 86xx: remove the redundant r2 global data pointer save
13847 The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add
13848 the another global data pointer save, but in fact the
13849 global data pointer will be initialized in the board_init_r,
13850 so remove it such as the 85xx/83xx family.
13852 Signed-off-by: Dave Liu <daveliu@freescale.com>
13853 Acked-by: Kumar Gala <kumar.gala@freescale.com>
13855 commit bd888e9544419665334a6f47f81f34011cea38f3
13856 Author: Dave Liu <daveliu@freescale.com>
13857 Date: Tue Oct 28 17:47:41 2008 +0800
13859 86xx: remove the unused code for 86xx family
13861 I believe these code was copied from 74xx family, but for
13862 86xx, it is unused.
13864 Signed-off-by: Dave Liu <daveliu@freescale.com>
13865 Acked-by: Kumar Gala <kumar.gala@freescale.com>
13867 commit 5ba1ef507402bc5e344dc374203792a40f222e8a
13868 Author: Dave Liu <daveliu@freescale.com>
13869 Date: Tue Oct 28 17:46:35 2008 +0800
13871 86xx: remove the second DDR LAW setting for mpc8641hpcn
13873 The DDR1 LAW will precedence the DDR2 LAW, so remove
13874 the second DDR LAW.
13876 Signed-off-by: Dave Liu <daveliu@freescale.com>
13877 Acked-by: Becky Bruce <becky.bruce@freescale.com>
13879 commit 137a2dfd11ac51ae3154f13f323609b33a4a072e
13880 Author: Dave Liu <daveliu@freescale.com>
13881 Date: Tue Oct 28 17:46:23 2008 +0800
13883 86xx: remove the unused ddr_enable_ecc in the board file
13885 The DDR controller of 86xx processors have the ECC data init
13886 feature, and the new DDR code is using the feature, we don't
13887 need the way with DMA to init memory again.
13889 Signed-off-by: Dave Liu <daveliu@freescale.com>
13890 Acked-by: Kumar Gala <kumar.gala@freescale.com>
13892 commit dc2adad85bf580d65916c940683f6e9671e8a5dd
13893 Author: Dave Liu <daveliu@freescale.com>
13894 Date: Tue Oct 28 17:46:12 2008 +0800
13896 86xx: Move the clear_tlbs before MMU turn on
13898 We must invalidate TLBs before MMU turn on, but
13899 currently the code is not, if there are some stale
13900 TLB entry valid in the TLBs, it will cause strange
13903 Signed-off-by: Dave Liu <daveliu@freescale.com>
13904 Acked-by: Becky Bruce <becky.bruce@freescale.com>
13906 commit 5cdade07b118d07154cb882650f9778cecc8a87c
13907 Author: Scott Wood <scottwood@freescale.com>
13908 Date: Mon Oct 27 15:57:08 2008 -0500
13910 mpc8313erdb: Document NAND boot.
13912 Previously, the documentation claimed that NAND boot is not supported.
13913 This is no longer true.
13915 Signed-off-by: Scott Wood <scottwood@freescale.com>
13917 commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd
13918 Author: Scott Wood <scottwood@freescale.com>
13919 Date: Wed Oct 29 14:20:26 2008 -0500
13921 NAND: Properly create JFFS2 cleanmarkers.
13923 As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean"
13924 command is currently broken, and among other things causes all blocks
13927 This implements it properly using MTD_OOB_AUTO, along with some
13930 Signed-off-by: Scott Wood <scottwood@freescale.com>
13932 commit f7fe57c09866b44692d18c8cf22828bd137ec58d
13933 Author: Scott Wood <scottwood@freescale.com>
13934 Date: Wed Oct 29 13:42:41 2008 -0500
13936 NAND fsl elbc: Set FMR[ECCM] based on page size.
13938 Hardware expects ECCM 0 for small page and ECCM 1 for large page
13939 when booting from NAND, so use those defaults.
13941 Signed-off-by: Scott Wood <scottwood@freescale.com>
13943 commit c013b74975dab0805ef6d369b013230c4e8a660d
13944 Author: Haiying Wang <Haiying.Wang@freescale.com>
13945 Date: Wed Oct 29 13:32:59 2008 -0400
13947 NAND: Add support for MPC8572DS board
13949 This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns
13950 0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in
13953 It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to
13954 make room for the increased code size with NAND enabled.
13956 Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
13957 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
13958 Signed-off-by: Scott Wood <scottwood@freescale.com>
13960 commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95
13961 Author: Haiying Wang <Haiying.Wang@freescale.com>
13962 Date: Wed Oct 29 11:05:55 2008 -0400
13964 Make Freescale local bus registers available for both 83xx and 85xx.
13966 - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
13967 can be shared by both 83xx and 85xx
13968 - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
13969 files which use lbus83xx_t.
13970 - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
13971 85xx can share them.
13973 Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
13974 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
13975 Signed-off-by: Scott Wood <scottwood@freescale.com>
13977 commit 695c130e4bf75b444720ddfd83aca88f41c046cf
13978 Author: Scott Wood <scottwood@freescale.com>
13979 Date: Mon Oct 27 15:38:30 2008 -0500
13981 NAND: Align right column of the shorthelp with other commands.
13983 I accidentally broke this in when making consistent the partial
13984 alignment of the longhelp.
13986 Signed-off-by: Scott Wood <scottwood@freescale.com>
13988 commit 33efde5ecac91ab118ff00b95a181fd6d75f8645
13989 Author: Karl Beldan <karl.beldan@gmail.com>
13990 Date: Mon Sep 15 16:08:03 2008 +0200
13992 NAND: Reset chip on power-up
13994 Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
13995 The first command sent is NAND_CMD_READID.
13996 Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
13997 Tested with an MT29F4G08AAC.
13999 Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
14000 Signed-off-by: Scott Wood <scottwood@freescale.com>
14002 commit c45912d8abc52de796b9059a58faf7c4166eab58
14003 Author: Scott Wood <scottwood@freescale.com>
14004 Date: Fri Oct 24 16:20:43 2008 -0500
14006 NAND: sync with 2.6.27
14008 This brings the core NAND code up to date with the Linux kernel.
14010 Since there were several drivers in Linux as of the last update that are
14011 not in u-boot, I'm not bringing over new drivers that have been added
14012 since in the absence of an interested party.
14014 I did not update OneNAND since it was recently synced by Kyungmin Park,
14015 and I'm not sure exactly what the common ancestor is.
14017 Signed-off-by: Scott Wood <scottwood@freescale.com>
14019 commit b1d0db1805c3395149777e507b6da53410abac4e
14020 Author: Kumar Gala <galak@kernel.crashing.org>
14021 Date: Tue Oct 21 17:25:47 2008 -0500
14023 bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}
14025 Added the ability to config out bootm support for Linux, NetBSD, RTEMS
14027 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14029 commit 5a98127d81a6eefc5a78a704df619bfe362eeb87
14030 Author: Kumar Gala <galak@kernel.crashing.org>
14031 Date: Tue Oct 21 17:25:46 2008 -0500
14033 bootm: support subcommands in linux ppc bootm
14035 Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.
14037 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14039 commit 49c3a861d11735838f1f1b11999ce433006dc919
14040 Author: Kumar Gala <galak@kernel.crashing.org>
14041 Date: Tue Oct 21 17:25:45 2008 -0500
14043 bootm: Add subcommands
14045 Add the ability to break the steps of the bootm command into several
14046 subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
14048 This allows us to do things like manipulate device trees before
14049 they are passed to a booting kernel or setup memory for a secondary
14050 core in multicore situations.
14052 Not all OS types support all subcommands (currently only start, loados,
14053 ramdisk, fdt, and go are supported).
14055 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14057 commit be08315933537f061bc1ce61f33a29c56458bbad
14058 Author: Kumar Gala <galak@kernel.crashing.org>
14059 Date: Tue Oct 21 17:25:44 2008 -0500
14061 bootm: Move to using a function pointer table for the boot os function
14063 This removes a bit of code and makes it easier for the upcoming sub bootm
14064 command support to call into the proper OS specific handler.
14066 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14067 Signed-off-by: Wolfgang Denk <wd@denx.de>
14069 commit a369f4a492fa2805d87775d27380f0eeaca35aa6
14070 Author: Graeme Russ <graeme.russ@gmail.com>
14071 Date: Mon Sep 29 23:03:14 2008 +1000
14073 i386: Renamed show_boot_progress in assembler code
14075 Renamed show_boot_progress in assembler init phase to
14076 show_boot_progress_asm to avoid link conflicts with C version
14078 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
14080 commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d
14081 Author: Peter Tyser <ptyser@xes-inc.com>
14082 Date: Mon Oct 27 16:42:00 2008 -0500
14084 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask
14086 The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx
14087 processors have a 3-bit wide IO_SEL field but have the most
14088 significant bit is wired to 0 so this change should not affect
14091 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
14093 commit cd4251624205cb97104f6e32679dc7754934f711
14094 Author: Becky Bruce <becky.bruce@freescale.com>
14095 Date: Mon Oct 27 16:09:42 2008 -0500
14097 powerpc: fix pci window initialization to work with > 4GB DRAM
14099 The existing code has a few errors that need to be fixed in
14100 order to support large RAM sizes. Fix those, and add a
14101 comment to make it clearer.
14103 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
14104 Acked-by: Kumar Gala <galak@kernel.crashing.org>
14106 commit 219542a1a66ca017b12860920714a9859b18a5d7
14107 Author: Kumar Gala <galak@kernel.crashing.org>
14108 Date: Mon Oct 27 13:16:20 2008 -0500
14110 pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.
14112 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14114 commit 6b59e03e0237a40a2305ea385defdfd92000978b
14115 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14116 Date: Mon Sep 1 16:21:22 2008 +0200
14118 lcd: Let the board code show board-specific info
14120 The information displayed when CONFIG_LCD_INFO is set is inherently
14121 board-specific, so it should be done by the board code. The current code
14122 dealing with this only handles two cases, and is already a horrible mess
14125 Yes, this duplicates some code, but it also allows boards to print more
14126 board-specific information; this used to be very difficult.
14128 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14129 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14131 commit 6f93d2b8fca504200a5758f7c6dd2d6852900765
14132 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14133 Date: Mon Sep 1 16:21:21 2008 +0200
14135 lcd: Set lcd_is_enabled before clearing the screen
14137 This allows the logo/info rendering routines to use the regular
14138 lcd_putc/lcd_puts/lcd_printf calls.
14140 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14141 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14143 commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2
14144 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14145 Date: Mon Sep 1 16:21:20 2008 +0200
14147 lcd: Implement lcd_printf()
14149 lcd_printf() has a prototype in include/lcd.h but no implementation. Fix
14150 this by borrowing the lcd_printf() implementation from the cogent board
14151 code (which appears to use its own LCD framework.)
14153 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14154 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14156 commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892
14157 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14158 Date: Mon Sep 1 16:21:19 2008 +0200
14160 atmel_lcdfb: Straighten out funky vl_sync logic
14162 If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED,
14163 otherwise we don't. WTF?
14165 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14166 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14168 commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55
14169 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14170 Date: Mon Sep 1 16:21:18 2008 +0200
14172 atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>
14174 atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It
14175 includes a file that does, asm/arch/gpio.h, but this file doesn't
14176 include <asm/arch/hardware.h> like it's supposed to.
14178 Add the missing include to asm/arch/gpio.h and remove the workaround
14179 from the atmel_lcdfb driver. This makes the driver compile on avr32.
14181 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
14182 Signed-off-by: Anatolij Gustschin <agust@denx.de>
14184 commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e
14185 Author: Kumar Gala <galak@kernel.crashing.org>
14186 Date: Wed Oct 22 14:38:55 2008 -0500
14188 86xx: Convert all fsl_pci_init users to new APIs
14190 Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
14191 fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().
14193 With these changes the board code is a bit smaller and we get dma-ranges
14194 set in the device tree for these boards.
14196 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14197 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14198 Acked-by: Jon Loeliger <jdl@freescale.com>
14200 commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98
14201 Author: Kumar Gala <galak@kernel.crashing.org>
14202 Date: Tue Oct 21 08:28:33 2008 -0500
14204 85xx: Convert all fsl_pci_init users to new APIs
14206 Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS,
14207 MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows()
14208 and ft_fsl_pci_setup().
14210 With these changes the board code is a bit smaller and we get dma-ranges
14211 set in the device tree for these boards.
14213 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14214 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14216 commit a2aab460727e5f674353a83a81000ef794bffcae
14217 Author: Kumar Gala <galak@kernel.crashing.org>
14218 Date: Thu Oct 23 00:01:06 2008 -0500
14220 pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges
14222 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14223 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14225 commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785
14226 Author: Kumar Gala <galak@kernel.crashing.org>
14227 Date: Wed Oct 22 14:06:24 2008 -0500
14229 pci/fsl_pci_init: Add a common PCI inbound setup function
14231 Add a common setup function that determines the pci_region(s) based
14232 on how much memory we have in the system.
14234 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14235 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14237 commit 612ea01018a459234d54ed57ec6a5a244ce75678
14238 Author: Kumar Gala <galak@kernel.crashing.org>
14239 Date: Tue Oct 21 10:13:14 2008 -0500
14241 pci/fsl_pci_init: Enable larger address and setting inbound windows properly
14243 * PCI Inbound window was setup incorrectly. The PCI address and system
14244 address were swapped. The PCI address should be setting piwar/piwbear
14245 and the system address should be setting pitar.
14247 * Removed masking of addresses to allow for system address to support
14248 system address & PCI address >32-bits
14250 * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses
14252 * Respect the PCI_REGION_PREFETCH for inbound windows
14254 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14255 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14257 commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228
14258 Author: Kumar Gala <galak@kernel.crashing.org>
14259 Date: Wed Oct 22 23:33:56 2008 -0500
14261 fdt: Added helper to set PCI dma-ranges property
14263 Added fdt_pci_dma_ranges() that parses the pci_region info from the
14264 struct pci_controller and populates the dma-ranges based on it.
14266 The max # of windws/dma-ranges we support is 3 since on embedded
14267 PowerPC based systems this is the max number of windows.
14269 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14270 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14272 commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f
14273 Author: Kumar Gala <galak@kernel.crashing.org>
14274 Date: Thu Oct 23 00:05:47 2008 -0500
14276 fdt: Add fdt_getprop_u32_default helpers
14278 Add helper functions to return find a node and return it's property
14279 or a default value.
14281 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14282 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14283 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
14285 commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f
14286 Author: Kumar Gala <galak@kernel.crashing.org>
14287 Date: Tue Oct 21 18:06:15 2008 -0500
14289 86xx: Enable 64-bit PCI resources on all Freescale boards
14291 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14292 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14294 commit 0151cbaccf4504821ecfde0217299bd740086bb6
14295 Author: Kumar Gala <galak@kernel.crashing.org>
14296 Date: Tue Oct 21 11:33:58 2008 -0500
14298 85xx: Enable 64-bit PCI resources on all Freescale boards
14300 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14301 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14303 commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8
14304 Author: Kumar Gala <galak@kernel.crashing.org>
14305 Date: Tue Oct 21 08:36:08 2008 -0500
14307 pci: Allow for PCI addresses to be 64-bit
14309 PCI bus is inherently 64-bit. While not all system require access to
14310 the full 64-bit PCI address range some do. This allows those systems
14311 to enable the full PCI address width via CONFIG_SYS_PCI_64BIT.
14313 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14314 Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
14315 Acked-by: Wolfgang Denk <wd@denx.de>
14317 commit ae5f943ba8ede448a4b1a145fd8911856701ecc5
14318 Author: Dave Liu <daveliu@freescale.com>
14319 Date: Thu Oct 23 21:18:53 2008 +0800
14321 85xx: Fix the incorrect register used for DDR erratum1
14323 The 8572 DDR erratum1:
14324 DDR controller may enter an illegal state when operating
14325 in 32-bit bus mode with 4-beat bursts.
14328 When operating with a 32-bit bus, it is recommended that
14329 DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used.
14330 This forces the DDR controller to use 4-beat bursts when
14331 communicating to the DRAMs. However, an issue exists that
14332 could lead to data corruption when the DDR controller is
14333 in 32-bit bus mode while using 4-beat bursts.
14336 If the DDR controller is operating in 32-bit bus mode with
14337 4-beat bursts, then the controller may enter into a bad state.
14338 All subsequent reads from memory is corrupted.
14339 Four-beat bursts with a 32-bit bus only is used with DDR2 memories.
14340 Therefore, this erratum does not affect DDR3 mode.
14343 To work around this issue, software must set DEBUG_1[31] in
14344 DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1
14345 and CCSRBAR offset + 0x6f00 for DDR_2).
14347 Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2
14348 as condition, but it should be DDR_SDRAM_CFG register.
14350 Signed-off-by: Dave Liu <daveliu@freescale.com>
14352 commit d5b693090ed08d24c18491df9d8fc7387b2906f3
14353 Author: Dave Liu <daveliu@freescale.com>
14354 Date: Thu Oct 23 21:17:19 2008 +0800
14356 85xx: remove unused config definition
14358 Signed-off-by: Dave Liu <daveliu@freescale.com>
14360 commit 0f060c3bf82832331a509f2e5d2442539e7aad09
14361 Author: Kumar Gala <galak@kernel.crashing.org>
14362 Date: Thu Oct 23 01:47:38 2008 -0500
14364 85xx: Add basic e500mc core support
14366 Introduce CONFIG_E500MC to deal with the minor differences between
14369 * Certain fields of HID0/1 don't exist anymore on e500mc
14370 * Cache line size is 64-bytes on e500mc
14371 * reset value of PIR is different
14373 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14375 commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677
14376 Author: Kumar Gala <galak@kernel.crashing.org>
14377 Date: Thu Oct 23 01:47:37 2008 -0500
14379 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number
14381 Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle
14382 e500mc's 64-byte cacheline properly when it gets added.
14384 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14386 commit 5deb8022c3749faac30e9ad9694691e2442b5c93
14387 Author: Georg Schardt <schardt@team-ctech.de>
14388 Date: Fri Oct 24 13:51:52 2008 +0200
14390 ppc4xx: New board avnet fx12 minimodul
14392 This patch adds support for the avnet fx12 minimodul.
14393 It needs the "ppc4xx: Generic architecture for xilinx ppc405"
14394 patch from Ricardo.
14396 Signed-off-by: Georg Schardt <schardt@team-ctech.de>
14397 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
14398 Signed-off-by: Stefan Roese <sr@denx.de>
14400 commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0
14401 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
14402 Date: Tue Oct 21 18:29:46 2008 +0200
14404 ppc4xx: Generic architecture for xilinx ppc405(v3)
14406 As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
14407 ppc440 boards, this patch presents a common architecture for all the
14408 xilinx ppc405 boards.
14410 Any custom xilinx ppc405 board can be added very easily with no code
14413 This patch also adds a simple generic board, that can be used on almost
14414 any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h
14416 This patch is prepared to work with the latest version of EDK (10.1)
14418 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
14419 Signed-off-by: Stefan Roese <sr@denx.de>
14421 commit 485c00a57fab86f72a3769480c66bf1ca22e1459
14422 Author: Stefan Roese <sr@denx.de>
14423 Date: Fri Oct 24 08:56:09 2008 +0200
14425 ppc4xx: Disable DDR2 autocalibration on Kilauea for now
14427 Since the new autocalibration still has some problems on some Kilauea
14428 boards with 200MHz DDR2 frequency we disable the autocalibration and
14429 use the hardcoded values as done before. This seems to work reliably
14430 on all known DDR2 frequencies.
14432 After the autocalibration issue is fixed we will enable it again.
14434 Signed-off-by: Stefan Roese <sr@denx.de>
14436 commit f177f4250c729727b1629fa8d8d6556c999e9b8c
14437 Author: Mike Frysinger <vapier@gentoo.org>
14438 Date: Wed Apr 9 02:02:07 2008 -0400
14440 Blackfin: fix up UART status bit handling
14442 Some Blackfin UARTs are read-to-clear while others are write-to-clear.
14443 This can cause problems when we poll the LSR and then later try and handle
14444 any errors detected.
14446 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14448 commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0
14449 Author: Mike Frysinger <vapier@gentoo.org>
14450 Date: Sat Oct 11 20:42:17 2008 -0400
14452 Blackfin: bf561-ezkit: drop redundant code
14454 Common Blackfin code already announces CPU information.
14456 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14458 commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e
14459 Author: Mike Frysinger <vapier@gentoo.org>
14460 Date: Sat Oct 11 20:43:10 2008 -0400
14462 Blackfin: bf561-ezkit: drop pointless USB code
14464 The USB/LAN register settings are not actually used/needed in order to
14465 drive things from U-Boot, so drop the code.
14467 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14469 commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab
14470 Author: Mike Frysinger <vapier@gentoo.org>
14471 Date: Sat Oct 11 20:47:58 2008 -0400
14473 Blackfin: linker scripts: force start.o and set initcode boundaries
14475 Make sure that the start.o object is always the first object in our linker
14476 script regardless of configuration settings, and add some linker symbols
14477 so the ldr utility can properly locate the initcode when generating a LDR.
14479 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14481 commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0
14482 Author: Mike Frysinger <vapier@gentoo.org>
14483 Date: Sat Oct 11 21:19:39 2008 -0400
14485 Blackfin: small cpu init optimization while setting interrupt mask
14487 Use the sti instruction to set the initial interrupt mask rather than
14488 banging on the core IMASK MMR to save both space and time.
14490 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14492 commit 960922291c9594acb575cec7e47d7bed9b58182c
14493 Author: Mike Frysinger <vapier@gentoo.org>
14494 Date: Sat Oct 11 21:18:10 2008 -0400
14496 Blackfin: set initial stack correctly according to Blackfin ABI
14498 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14500 commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b
14501 Author: Mike Frysinger <vapier@gentoo.org>
14502 Date: Sun Apr 20 03:11:53 2008 -0400
14504 Blackfin: make baud calculation more accurate
14506 We should use the algorithm in the Linux kernel so that the UART divisor
14507 calculation is more accurate. It also fixes problems on some picky UARTs
14508 that have sampling anomalies.
14510 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14512 commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06
14513 Author: Mike Frysinger <vapier@gentoo.org>
14514 Date: Mon Oct 6 04:21:41 2008 -0400
14516 Blackfin: decode hwerrcause/excause when crashing
14518 Having to decode hwerrcause/excause values is a pain, so automate it.
14520 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14522 commit 2de95bb20c488f20298df6881b700a5a757ee780
14523 Author: Mike Frysinger <vapier@gentoo.org>
14524 Date: Mon Oct 6 04:20:54 2008 -0400
14526 Blackfin: fix register dump messages
14528 Make sure we report RETI/IPEND correctly.
14530 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14532 commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b
14533 Author: Mike Frysinger <vapier@gentoo.org>
14534 Date: Mon Oct 6 04:19:34 2008 -0400
14536 Blackfin: don't bother displaying reboot msg when crashing
14538 The hang function already tells you to reboot, so no point in showing it
14541 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14543 commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95
14544 Author: Mike Frysinger <vapier@gentoo.org>
14545 Date: Sun Jun 1 01:23:48 2008 -0400
14547 Blackfin: enable support for nested interrupts
14549 During cpu init, make sure we initialize the CEC properly so that
14550 interrupts can fire and be handled while U-Boot is running.
14552 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14554 commit 39782727e185860faa4884c2b04e84cb33d1c6cf
14555 Author: Mike Frysinger <vapier@gentoo.org>
14556 Date: Mon Oct 6 03:55:25 2008 -0400
14558 Blackfin: init NAND before relocating env
14560 If booting out of NAND, we need to make sure we initialize it properly
14561 before attempting to relocate the environment.
14563 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14565 commit 0f9a8819416ba40a53de50af148847a0e508f84d
14566 Author: Mike Frysinger <vapier@gentoo.org>
14567 Date: Thu Aug 7 18:40:13 2008 -0400
14569 Blackfin: check cache bits, not cplb bits
14571 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14573 commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76
14574 Author: Mike Frysinger <vapier@gentoo.org>
14575 Date: Thu Aug 7 17:52:59 2008 -0400
14577 Blackfin: drop unused cache flush code
14579 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14581 commit 50f0d211912a648e31aa9123b4665a0444bb8ca9
14582 Author: Mike Frysinger <vapier@gentoo.org>
14583 Date: Thu Aug 7 15:21:47 2008 -0400
14585 Blackfin: unify cache handling code
14587 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14589 commit 3c8798983403cb68a827d7a0d09b1134524a1b7d
14590 Author: Mike Frysinger <vapier@gentoo.org>
14591 Date: Mon Oct 6 03:39:07 2008 -0400
14593 Blackfin: only initialize the RTC when actually used
14595 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14597 commit 621e579b812dd1a2e6777f7cbf6e55e736505823
14598 Author: Mike Frysinger <vapier@gentoo.org>
14599 Date: Mon Oct 6 03:44:33 2008 -0400
14601 Blackfin: fix SWRST register definition
14603 The SWRST register is a 16bit, not 32bit, register.
14605 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14607 commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b
14608 Author: Mike Frysinger <vapier@gentoo.org>
14609 Date: Thu Aug 7 18:54:57 2008 -0400
14611 Blackfin: build with -fomit-frame-pointer
14613 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14615 commit adbfeeb7b32f737a9738daa583350d2bb9ed017a
14616 Author: Mike Frysinger <vapier@gentoo.org>
14617 Date: Thu Aug 7 17:50:26 2008 -0400
14619 Blackfin: document some of the blackfin directories
14621 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14623 commit e4337968e43698a68ba608369f46d4a4114111ca
14624 Author: Mike Frysinger <vapier@gentoo.org>
14625 Date: Thu Aug 7 15:16:56 2008 -0400
14627 Blackfin: only enable hardware error irq by default
14629 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14631 commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4
14632 Author: Mike Frysinger <vapier@gentoo.org>
14633 Date: Thu Aug 7 13:36:43 2008 -0400
14635 Blackfin: punt old unused mem_init.h header
14637 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14639 commit bcc121a01608042066a19ab5bff5bcfb805bf406
14640 Author: Mike Frysinger <vapier@gentoo.org>
14641 Date: Thu Aug 7 13:18:55 2008 -0400
14643 Blackfin: delete unused page_descriptor_table_size define
14645 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14647 commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc
14648 Author: Mike Frysinger <vapier@gentoo.org>
14649 Date: Thu Aug 7 13:17:03 2008 -0400
14651 Blackfin: fix typo in boot mode comment and add NAND define
14653 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14655 commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c
14656 Author: Ben Maan <moo@cow>
14657 Date: Thu Aug 7 13:14:21 2008 -0400
14659 Blackfin: fix port mux defines for BF54x
14661 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14663 commit 0656ef2ba274910d31364fe022f6c7db0051660d
14664 Author: Mike Frysinger <vapier@gentoo.org>
14665 Date: Thu Aug 7 13:09:50 2008 -0400
14667 Blackfin: update anomaly lists
14669 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14671 commit 50ca95402876cf7bac4e2d4f7855f616a038763f
14672 Author: Mike Frysinger <vapier@gentoo.org>
14673 Date: Thu Aug 7 13:08:54 2008 -0400
14675 Blackfin: unify DSPID/DBGSTAT MMR definitions
14677 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14679 commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e
14680 Author: Wolfgang Denk <wd@denx.de>
14681 Date: Tue Oct 21 15:53:51 2008 +0200
14683 Fix strmhz(): avoid printing negative fractions
14685 Signed-off-by: Wolfgang Denk <wd@denx.de>
14687 commit 4a7f6b750d8de543fdf8e58acd86745010054571
14688 Author: Richard Retanubun <RichardRetanubun@ruggedcom.com>
14689 Date: Fri Oct 17 08:55:51 2008 -0400
14691 mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function
14693 This is done to allow other 83XX based platforms which also have UPM
14694 (e.g. 8360) to configure and use their UPM in u-boot.
14696 Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
14697 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14699 commit 3bf1be3c0cfb1129b68cc1474119e5f323536488
14700 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
14701 Date: Tue Oct 14 22:58:53 2008 +0400
14703 mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
14705 With this patch u-boot can fixup the dr_mode and phy_type properties
14706 for the Dual-Role USB controller.
14708 While at it, also remove #ifdefs around includes, they are not needed.
14710 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14711 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14713 commit b3379f3fd13969934c00097c05754e7a8990fd39
14714 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
14715 Date: Wed Oct 8 20:52:54 2008 +0400
14717 mpc83xx: add ELBC NAND support for the MPC837XEMDS boards
14719 Though NAND chip is replaceable on the MPC837XE-MDS boards, the
14720 current settings don't work with the default chip on the board.
14721 Nevertheless Freescale's U-Boot sets the option register correctly,
14722 so I just dumped the register from the working u-boot. My guess is
14723 that the old settings were applicable for some pilot boards, not
14724 found in the production.
14726 This patch also enables FSL ELBC driver so that we could access
14727 the NAND storage in the u-boot.
14729 The NAND support costs about 45KB, so the u-boot no longer fits
14730 into two 128KB NOR flash sectors, thus we also have to adjust
14731 environment location: add another 128KB to the monitor length.
14733 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14735 It is due to hardware design and logic defect, that is the
14736 I/O[0:7] of NAND chip is connected to LAD[7:0], so when
14737 the NAND chip connected to nLCS3, you have to set up the
14738 OR3[BCTLD] = '1' for normal operation, otherwise it will have
14739 bus contention due to the pin 48/25 of U60 is enabled.
14741 Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not
14742 asserted upon access to the NAND chip, keep the default state.
14744 Acked-by: Dave Liu <daveliu@freescale.com>
14745 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14747 commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7
14748 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
14749 Date: Thu Oct 2 19:17:33 2008 +0400
14751 mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
14753 The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
14754 standalone or acting as a PCI agent. User's Guide says:
14756 - When the CPLD recognizes its location on the PIB it automatically
14757 configures RCW to the PCI Host.
14758 - If the CPLD fails to recognize its location then it is automatically
14759 configured as an Agent and the PCI is configured to an external arbiter.
14761 This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
14762 flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
14763 PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
14764 any arbiter bad things will happen (here the board hangs during any config
14767 In this situation we must disable the PCI. And in case of anybody really
14768 want to use an external arbiter, we provide "pci_external_aribter"
14769 environment variable.
14771 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14772 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14774 commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3
14775 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
14776 Date: Thu Oct 2 18:32:25 2008 +0400
14778 mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
14780 This involves configuring the SerDes and fixing up the flags and
14781 PHY addresses for the TSECs.
14783 For Linux we also fix up the device tree.
14785 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14786 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14788 commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8
14789 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
14790 Date: Thu Oct 2 18:31:59 2008 +0400
14792 mpc83xx: add TSECs' HRCWH masks for MPC837x processors
14794 We'll use these masks to parse TSEC modes out of HRCWH.
14796 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14797 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14799 commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff
14800 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
14801 Date: Thu Oct 2 18:31:56 2008 +0400
14803 mpc83xx: serdes: add forgotten shifts for rfcks
14805 The rfcks should be shifted by 28 bits left. We didn't notice the bug
14806 because we were using only 100MHz clocks (for which rfcks == 0).
14808 Though, for SGMII we'll need 125MHz clocks.
14810 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14811 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14813 commit 55c531984dcf933e4cd13a187a7e08e873b7ced1
14814 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
14815 Date: Thu Oct 2 18:31:53 2008 +0400
14817 mpc83xx: fix serdes setup for the MPC8378E boards
14819 MPC837xE specs says that SerDes1 has:
14821 — Two lanes running x1 SGMII at 1.25 Gbps;
14822 — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
14826 — Two lanes running x1 PCI Express at 2.5 Gbps;
14827 — One lane running x2 PCI Express at 2.5 Gbps;
14828 — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
14830 The spec also explicitly states that PEX options are not valid for
14833 Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
14834 which is wrong to do.
14836 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14837 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14839 commit 5c2ff323a94e27e481f70c44838d43fcd844dd46
14840 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
14841 Date: Wed Sep 10 18:12:37 2008 +0400
14843 mpc83xx: mpc8360emds: rework LBC SDRAM setup
14845 Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes
14846 it difficult to use (b/c then the memory is discontinuous and
14847 there is quite big memory hole between the DDR/SDRAM regions).
14849 This patch reworks LBC SDRAM setup so that now we dynamically
14850 place the LBC SDRAM near the DDR (or at 0x0 if there isn't any
14853 With this patch we're able to:
14855 - Boot without external DDR memory;
14856 - Use most "DDR + SDRAM" setups without need to support for
14857 sparse/discontinuous memory model in the software.
14859 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
14860 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14862 commit def0819e920b05b34b56d8b42e1e43d9b89a52d6
14863 Author: Wolfgang Denk <wd@xpert.denx.de>
14864 Date: Tue Oct 21 11:23:56 2008 +0200
14866 FDT: don't use private kernel header files
14868 On some systems (for example Fedora Core 4) U-Boot builds with the
14869 following wanrings only:
14872 In file included from /home/wd/git/u-boot/include/libfdt_env.h:33,
14874 /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead!
14876 This patch fixes this problem.
14878 Signed-off-by: Wolfgang Denk <wd@denx.de>
14880 commit f4d14c55504ce40287321bd63ee269e3233ee4ae
14881 Author: Stefan Roese <sr@denx.de>
14882 Date: Mon Oct 13 15:15:31 2008 +0200
14884 ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup
14886 Signed-off-by: Stefan Roese <sr@denx.de>
14888 commit 43cbce69d48d052574d71f50724be546d90a46a4
14889 Author: Stefan Roese <sr@denx.de>
14890 Date: Mon Oct 13 10:45:14 2008 +0200
14892 ppc4xx: Correctly setup ranges property in ebc node
14894 Previously only the NOR flash mapping was written into the ranges
14895 property of the ebc node. This patch now writes all enabled chip
14896 select areas into the ranges property.
14898 Signed-off-by: Stefan Roese <sr@denx.de>
14900 commit d7b26d58328f137471ea97de382bfa63f7239931
14901 Author: Dirk Eibach <eibach@gdsys.de>
14902 Date: Wed Oct 8 15:37:50 2008 +0200
14904 ppc4xx: Add GDSys neo 405EP board support
14906 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
14907 Signed-off-by: Stefan Roese <sr@denx.de>
14909 commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c
14910 Author: Niklaus Giger <niklaus.giger@netstal.com>
14911 Date: Wed Oct 1 14:46:13 2008 +0200
14913 ppc4xx: Update configs for Netstal boards
14915 I reorganized my config files, putting the common stuff into netstal-common.h
14916 (got the idea by looking a amcc-common.h from Stefan).
14918 Added stuff to boot the new powerpc linux via NFS (only tested with HCU4).
14920 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
14921 Signed-off-by: Stefan Roese <sr@denx.de>
14923 commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15
14924 Author: Adam Graham <agraham@amcc.com>
14925 Date: Wed Oct 8 10:13:19 2008 -0700
14927 ppc4xx: Add routine to retrieve CPU number
14929 Provide a weak defined routine to retrieve the CPU number for
14930 reference boards that have multiple CPU's. Default behavior
14931 is the existing single CPU print output. Reference boards with
14932 multiple CPU's need to provide a board specific routine.
14933 See board/amcc/arches/arches.c for an example.
14935 Signed-off-by: Adam Graham <agraham@amcc.com>
14936 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
14937 Signed-off-by: Stefan Roese <sr@denx.de>
14939 commit 59217bae40e90982ab5400d849c08af683ace036
14940 Author: Adam Graham <agraham@amcc.com>
14941 Date: Wed Oct 8 10:13:14 2008 -0700
14943 ppc4xx: Add static support for 44x IBM SDRAM Controller
14945 This patch add the capability to configure a PPC440 based IBM SDRAM
14946 Controller with static, compiled-in, values. PPC440 memory subsystem
14947 includes a Memory Queue core.
14949 Signed-off-by: Adam Graham <agraham@amcc.com>
14950 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
14951 Signed-off-by: Stefan Roese <sr@denx.de>
14953 commit f09f09d3899017aaaa2b031bba63c271e9c48e4d
14954 Author: Adam Graham <agraham@amcc.com>
14955 Date: Wed Oct 8 10:12:53 2008 -0700
14957 ppc4xx: Add AMCC Arches board support (dual 460GT)
14959 The Arches Evaluation board is based on the AMCC 460GT SoC chip.
14960 This board is a dual processor board with each processor providing
14961 independent resources for Rapid IO, Gigabit Ethernet, and serial
14962 communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
14963 FLASH, UART, EEPROM and temperature sensor, along with a shared debug
14964 port. The two 460GT's will communicate with each other via shared
14965 memory, Gigabit Ethernet and x1 PCI-Express.
14967 Signed-off-by: Adam Graham <agraham@amcc.com>
14968 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
14969 Signed-off-by: Stefan Roese <sr@denx.de>
14971 commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3
14972 Author: Wolfgang Denk <wd@xpert.denx.de>
14973 Date: Sun Oct 19 21:54:30 2008 +0200
14975 TQM8260: environment in flash instead EEPROM, baudrate 115k
14977 Several customers have reported problems with the environment in
14978 EEPROM, including corrupted content after board reset. Probably the
14979 code to prevent I2C Enge Conditions is not working sufficiently.
14981 We move the environment to flash now, which allows to have a backup
14982 copy plus gives much faster boot times.
14984 Also, change the default console initialization to 115200 bps as used
14985 on most other boards.
14987 Signed-off-by: Wolfgang Denk <wd@denx.de>
14989 commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8
14990 Author: Kumar Gala <galak@kernel.crashing.org>
14991 Date: Sun Oct 19 12:49:19 2008 -0500
14993 85xx: Fix compile warning in mpc8536ds.c
14995 mpc8536ds.c: In function 'is_sata_supported':
14996 mpc8536ds.c:615: warning: unused variable 'devdisr'
14998 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15000 commit 8ed44d91c8122d00368523b0b746691c895d3b3c
15001 Author: Wolfgang Denk <wd@denx.de>
15002 Date: Sun Oct 19 02:35:50 2008 +0200
15004 Cleanup: fix "MHz" spelling
15006 Signed-off-by: Wolfgang Denk <wd@denx.de>
15008 commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b
15009 Author: Wolfgang Denk <wd@denx.de>
15010 Date: Sun Oct 19 02:35:49 2008 +0200
15012 Use strmhz() to format clock frequencies
15014 Signed-off-by: Wolfgang Denk <wd@denx.de>
15016 commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9
15017 Author: Wolfgang Denk <wd@denx.de>
15018 Date: Sun Oct 19 02:35:48 2008 +0200
15020 strmhz(): Round numbers when printing clock frequencies
15022 Round clock frequencies for printing.
15024 Many boards printed off clock frequencies like 399 MHz instead of the
15025 exact 400 MHz because numberes were not rounded. This is fixed now.
15027 Signed-off-by: Wolfgang Denk <wd@denx.de>
15029 commit 681c02d05b29c6d46093525052c74b9c4ddc8b08
15030 Author: Timur Tabi <timur@freescale.com>
15031 Date: Mon Oct 20 15:16:47 2008 -0500
15033 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
15035 Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
15036 to add a comment that the correct value disagrees with the 8544 reference
15037 manual. The changelog for that commit is also wrong, as it says "bit 28"
15038 when it should be "bit 24".
15040 Signed-off-by: Timur Tabi <timur@freescale.com>
15042 commit 360fe71e82b83e264c964c9447c537e9a1f643c8
15043 Author: Heiko Schocher <hs@denx.de>
15044 Date: Fri Oct 17 18:24:06 2008 +0200
15046 mgcoge: add redundant environment sector
15048 Signed-off-by: Heiko Schocher <hs@denx.de>
15050 commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a
15051 Author: Heiko Schocher <hs@denx.de>
15052 Date: Fri Oct 17 18:23:27 2008 +0200
15054 mgsuvd: update size of environment
15056 Signed-off-by: Heiko Schocher <hs@denx.de>
15058 commit 2e26d837f11460c0e6dede7d65424a31e0183d09
15059 Author: Jason Jin <Jason.jin@freescale.com>
15060 Date: Fri Oct 10 11:41:00 2008 +0800
15062 Enabled the Freescale SGMII riser card on 8536DS
15064 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15066 commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55
15067 Author: Liu Yu <yu.liu@freescale.com>
15068 Date: Fri Oct 10 11:40:59 2008 +0800
15070 Enabled the Freescale SGMII riser card on 8572DS
15072 This patch based on Andy's work.
15073 Including command 'pixis_set_sgmii' support.
15075 Signed-off-by: Liu Yu <yu.liu@freescale.com>
15077 commit bff188baf9427c35745356439435acf3864d4c65
15078 Author: Liu Yu <yu.liu@freescale.com>
15079 Date: Fri Oct 10 11:40:58 2008 +0800
15081 Make pixis_set_sgmii more general to support MPC85xx boards.
15083 The pixis sgmii command depend on the FPGA support on the board, some 85xx
15084 boards support SGMII riser card but did not support this command, define
15085 CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.
15087 Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
15088 are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
15089 PIXIS_VCFGEN1_MASK in header file for both boards.
15091 Signed-off-by: Liu Yu <yu.liu@freescale.com>
15093 commit 5e981d683d2363204c76773941c2e9c2044c808f
15094 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15095 Date: Wed Oct 8 23:38:02 2008 -0500
15097 Add cpu/8xxx to TAGS_SUBDIRS
15099 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15101 commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63
15102 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15103 Date: Thu Oct 9 01:25:55 2008 -0500
15105 fsl_law clear enable before changing.
15107 Debug sessions may have left enabled laws.
15108 Changing lawbar with an unkown enabled tgtid could cause problems.
15110 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15112 commit 86be510f7b5443e7e937f696bfbe037fdc740b15
15113 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15114 Date: Thu Oct 9 00:29:27 2008 -0500
15116 mpc8572 additional end-point mode
15118 mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0.
15119 Include host_agent == 0 decode for end-point determination.
15121 This is not needed for the ds reference board since pcie3 will be a host
15122 in order to connect to the uli chip. Include it here as a reference for
15123 other mpc8572 boards.
15125 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15127 commit 6856b3d0221a838580e6bb06f61425fd7529ba93
15128 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15129 Date: Wed Oct 8 23:37:59 2008 -0500
15131 85xx if NUM_CPUS>1, print cpu number
15133 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15135 commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0
15136 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
15137 Date: Wed Oct 8 23:38:01 2008 -0500
15139 pixis do not print long help if not configured
15141 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
15143 commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5
15144 Author: Andy Fleming <afleming@freescale.com>
15145 Date: Tue Oct 7 08:09:50 2008 -0500
15147 Have u-boot pass stashing parameters into device tree
15149 Some cores don't support ethernet stashing at all, and some
15150 instances have errata. Adds 3 properties to gianfar nodes
15151 which support stashing. For now, just add this support to
15154 Signed-off-by: Andy Fleming <afleming@freescale.com>
15156 commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7
15157 Author: Haiying Wang <Haiying.Wang@freescale.com>
15158 Date: Fri Oct 3 12:37:57 2008 -0400
15160 Add DDR options setting on MPC8641HPCN board
15162 * Add board specific parameter table to choose correct cpo, clk_adjust,
15163 write_data_delay based on board ddr frequency and n_ranks.
15165 * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
15167 Signed-off-by: James Yang <James.Yang@freescale.com>
15168 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15170 commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111
15171 Author: Haiying Wang <Haiying.Wang@freescale.com>
15172 Date: Fri Oct 3 12:37:41 2008 -0400
15174 Add ddr interleaving suppport for MPC8572DS board
15176 * Add board specific parameter table to choose correct cpo, clk_adjust,
15177 write_data_delay, 2T based on board ddr frequency and n_ranks.
15179 * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
15181 * Set memory controller interleaving mode to bank interleaving, and disable
15182 bank(chip select) interleaving mode by default, because the default on-board
15183 DDR DIMMs are 2x512MB single-rank.
15185 * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000.
15187 Signed-off-by: James Yang <James.Yang@freescale.com>
15188 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15190 commit 1f293b417ac6ab8e317ca2b770377ca93edf2370
15191 Author: Haiying Wang <Haiying.Wang@freescale.com>
15192 Date: Fri Oct 3 12:37:26 2008 -0400
15194 Add debug information for DDR controller registers
15196 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15198 commit c9ffd839b1ada502c86f88edaf1534426b6688ce
15199 Author: Haiying Wang <Haiying.Wang@freescale.com>
15200 Date: Fri Oct 3 12:37:10 2008 -0400
15202 Check DDR interleaving mode
15204 * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and
15206 * Print DDR interleaving mode information
15207 * Add doc/README.fsl-ddr to describe the interleaving setting
15209 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15211 commit dfb49108e4f86c2224e1f30124328b0de66ef72e
15212 Author: Haiying Wang <Haiying.Wang@freescale.com>
15213 Date: Fri Oct 3 12:36:55 2008 -0400
15215 Pass dimm parameters to populate populate controller options
15217 Because some dimm parameters like n_ranks needs to be used with the board
15218 frequency to choose the board parameters like clk_adjust etc. in the
15219 board_specific_paramesters table of the board ddr file, we need to pass
15220 the dimm parameters to the board file.
15222 * move ddr dimm parameters header file from /cpu to /include directory.
15223 * add ddr dimm parameters to populate board specific options.
15224 * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.
15226 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15228 commit dbbbb3abeff325855cae76e33d69d5665631443f
15229 Author: Haiying Wang <Haiying.Wang@freescale.com>
15230 Date: Fri Oct 3 12:36:39 2008 -0400
15232 Make DDR interleaving mode work correctly
15235 1. Correctly set intlv_ctl in cs_config.
15236 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
15237 3. Set base_address and total memory for each ddr controller in memory
15238 controller interleaving mode.
15240 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15242 commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6
15243 Author: Kumar Gala <galak@kernel.crashing.org>
15244 Date: Mon Sep 22 23:40:42 2008 -0500
15246 85xx: Enable interrupt and setexpr commands on Freescale 85xx boards
15248 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15250 commit 7c0d4a7508d252d2d7c137eeb376814132dda30f
15251 Author: Kumar Gala <galak@kernel.crashing.org>
15252 Date: Mon Sep 22 14:11:11 2008 -0500
15254 85xx: Improve flash remapping on MPC8572DS & MPC8536DS
15256 Changing the flash from cacheable to cache-inhibited was taking a significant
15257 amount of time due to the fact that we were iterating over the full 256M of
15258 flash. Instead we can just flush the L1 d-cache and invalidate the i-cache.
15260 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15262 commit 54e091d3b603a3332c619199ca83a07e95960da4
15263 Author: Kumar Gala <galak@kernel.crashing.org>
15264 Date: Mon Sep 22 14:11:10 2008 -0500
15266 85xx: Export invalidate_{i,d}cache and add flush_dcache
15268 Added the ability for C code to invalidate the i/d-cache's and
15269 to flush the d-cache. This allows us to more efficient change mappings
15270 from cache-able to cache-inhibited.
15272 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15274 commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da
15275 Author: Heiko Schocher <hs@denx.de>
15276 Date: Fri Oct 17 16:11:52 2008 +0200
15278 mgcoge, mgsuvd: extract more common code
15280 in ft_blob_update () for both boards was an unneccessary
15281 repetition of code, which this patch moves in a common
15282 function for this boards.
15284 Signed-off-by: Heiko Schocher <hs@denx.de>
15286 commit 9e299192ca9850cf725456388042a5aa5a6f3ec7
15287 Author: Heiko Schocher <hs@denx.de>
15288 Date: Fri Oct 17 12:15:55 2008 +0200
15290 mgcoge, mgsuvd: use in_*/out_* accesors
15292 Signed-off-by: Heiko Schocher <hs@denx.de>
15294 commit a21ca95f8b9dca22714952b348e4905ac157b5cd
15295 Author: Heiko Schocher <hs@denx.de>
15296 Date: Fri Oct 17 13:52:51 2008 +0200
15298 mgsuvd: fix compiler warning when using soft_i2c driver
15300 Signed-off-by: Heiko Schocher <hs@denx.de>
15302 commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b
15303 Author: Heiko Schocher <hs@denx.de>
15304 Date: Fri Oct 17 12:15:05 2008 +0200
15306 mgsuvd: fix coding style
15308 Signed-off-by: Heiko Schocher <hs@denx.de>
15310 commit 5f4c3137f4f051787707c548133823f1656eb508
15311 Author: Heiko Schocher <hs@denx.de>
15312 Date: Fri Oct 17 12:13:30 2008 +0200
15314 mgcoge: Second Flash on CS5 not on CS1
15316 Signed-off-by: Heiko Schocher <hs@denx.de>
15318 commit 76da19df5b8e186d269f29190696bd31fb6c836b
15319 Author: Kumar Gala <galak@kernel.crashing.org>
15320 Date: Thu Oct 16 21:52:08 2008 -0500
15322 Added arch_lmb_reserve to allow arch specific memory regions protection
15324 Each architecture has different ways of determine what regions of memory
15325 might not be valid to get overwritten when we boot. This provides a
15326 hook to allow them to reserve any regions they care about. Currently
15327 only ppc, m68k and sparc need/use this.
15329 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15331 commit e02d4a9904c8f36395994c0c81469d552b82f5ea
15332 Author: Heiko Schocher <hs@denx.de>
15333 Date: Thu Oct 16 16:32:35 2008 +0200
15335 mgcoge: added CONFIG_FIT to support the new u-boot image format
15337 Signed-off-by: Heiko Schocher <hs@denx.de>
15339 commit 6d0f6bcf337c5261c08fabe12982178c2c489d76
15340 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15341 Date: Thu Oct 16 15:01:15 2008 +0200
15343 rename CFG_ macros to CONFIG_SYS
15345 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15347 commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e
15348 Author: Kumar Gala <galak@kernel.crashing.org>
15349 Date: Mon Oct 13 14:12:55 2008 -0500
15351 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version
15353 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15355 commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3
15356 Author: Kumar Gala <galak@kernel.crashing.org>
15357 Date: Tue Sep 23 10:05:02 2008 -0500
15359 Expose command table search for sub-commands
15361 Sub-command can benefit from using the same table and search functions
15362 that top level commands have. Expose this functionality by refactoring
15363 find_cmd() and introducing find_cmd_tbl() that sub-command processing
15366 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15368 commit f7e51b27508446f8cae3927975817137979ad5e8
15369 Author: Heiko Schocher <hs@denx.de>
15370 Date: Wed Oct 15 09:41:33 2008 +0200
15372 mgsuvd, mgcoge: added BOOTCOUNT feature.
15374 Signed-off-by: Heiko Schocher <hs@denx.de>
15376 commit 8f64da7f83b553889bc08400c97047998382e9d2
15377 Author: Heiko Schocher <hs@denx.de>
15378 Date: Wed Oct 15 09:41:00 2008 +0200
15380 mgcoge, mgsuvd: added support for the IVM EEprom.
15382 The EEprom contains some Manufacturerinformation,
15383 which are read from u-boot at boot time, and saved
15384 in same hush shell variables.
15386 Signed-off-by: Heiko Schocher <hs@denx.de>
15388 commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983
15389 Author: Heiko Schocher <hs@denx.de>
15390 Date: Wed Oct 15 09:40:28 2008 +0200
15392 hush: add showvar command for hush shell.
15394 This new command shows the local variables defined in
15399 - print values of all hushshell variables
15401 - print value of hushshell variable 'name'
15403 Also make the set_local_var() and unset_local_var ()
15404 no longer static, so it is possible to define local
15405 hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR
15406 is defined, u-boot calls hush_init_var (), where
15407 boardspecific code can define local hush shell
15408 variables at boottime.
15410 Signed-off-by: Heiko Schocher <hs@denx.de>
15412 commit 67b23a322848d828a5e45c0567b72762bfde7abf
15413 Author: Heiko Schocher <hs@denx.de>
15414 Date: Wed Oct 15 09:39:47 2008 +0200
15416 I2C: adding new "i2c bus" Command to the I2C Subsystem.
15418 With this Command it is possible to add new I2C Busses,
15419 which are behind 1 .. n I2C Muxes. Details see README.
15421 Signed-off-by: Heiko Schocher <hs@denx.de>
15423 commit c24853644ddd2dd2e4246b5854a93e6254a14092
15424 Author: Heiko Schocher <hs@denx.de>
15425 Date: Wed Oct 15 09:39:08 2008 +0200
15427 mgcoge, mgsuvd: add board specific I2C deblocking mechanism.
15429 As documented in doc/I2C_Edge_Conditions, adding a
15430 board specific deblocking mechanism via CFG_I2C_INIT_BOARD
15431 for the mgcoge and mgsuvd board.
15433 This code was originally written by Keymile in association
15434 with Anatech and Atmel in 1998. The Code toggels the SCL
15435 until the SCA line goes to HIGH (max. 16 times).
15436 And after this, a start condition is sent.
15438 This is another approach to deblock the I2C Bus. The
15439 soft I2C driver actually sends 9 clocks with SDA High,
15440 and then a stop at the end, to deblock the I2C Bus.
15442 Maybe we should use the approach from Keymile as
15445 Signed-off-by: Heiko Schocher <hs@denx.de>
15447 commit 4ca107effebfbabac1057c39632105dacef95957
15448 Author: Heiko Schocher <hs@denx.de>
15449 Date: Wed Oct 15 09:38:38 2008 +0200
15451 soft_i2c: Add CFG_I2C_INIT_BOARD option
15453 This patch adds the option for a boardspecific
15454 I2C deblocking mechanism for the soft i2c driver.
15456 Signed-off-by: Heiko Schocher <hs@denx.de>
15458 commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1
15459 Author: Heiko Schocher <hs@denx.de>
15460 Date: Wed Oct 15 09:38:07 2008 +0200
15462 mgcoge, mgsuvd: add DTT (LM75) support.
15464 Signed-off-by: Heiko Schocher <hs@denx.de>
15466 commit 8e442df438ab677057571e3ac01846bff7719bce
15467 Author: Heiko Schocher <hs@denx.de>
15468 Date: Wed Oct 15 09:37:34 2008 +0200
15470 lm75: Make the LM75 MULTI_BUS compatible.
15472 Signed-off-by: Heiko Schocher <hs@denx.de>
15474 commit 12f1678127c1df2b2878ba93c88948bedc060775
15475 Author: Heiko Schocher <hs@denx.de>
15476 Date: Wed Oct 15 09:37:04 2008 +0200
15478 lm75: fix Codingstyle issues.
15480 Signed-off-by: Heiko Schocher <hs@denx.de>
15482 commit f2202450c75ba6934b356024101500ddcde6e2a6
15483 Author: Heiko Schocher <hs@denx.de>
15484 Date: Wed Oct 15 09:36:33 2008 +0200
15486 mgcoge, mgsuvd: added EEprom support.
15488 Signed-off-by: Heiko Schocher <hs@denx.de>
15490 commit 9661bf9d120f760238b2a073b84f2baf05010057
15491 Author: Heiko Schocher <hs@denx.de>
15492 Date: Wed Oct 15 09:36:03 2008 +0200
15494 mgcoge, mgsuvd: add I2C support.
15496 Signed-off-by: Heiko Schocher <hs@denx.de>
15498 commit 98aed379586a155292efbf3209356836584b601c
15499 Author: Heiko Schocher <hs@denx.de>
15500 Date: Wed Oct 15 09:35:26 2008 +0200
15502 soft_i2c: prevent compiler warnings if driver does not use CPU Pins.
15504 This patch fixes the following warnings, when using
15505 the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx
15508 soft_i2c.c: In function 'send_reset':
15509 soft_i2c.c:93: warning: unused variable 'immr'
15510 soft_i2c.c: In function 'send_start':
15511 soft_i2c.c:124: warning: unused variable 'immr'
15512 soft_i2c.c: In function 'send_stop':
15513 soft_i2c.c:146: warning: unused variable 'immr'
15514 soft_i2c.c: In function 'send_ack':
15515 soft_i2c.c:171: warning: unused variable 'immr'
15516 soft_i2c.c: In function 'write_byte':
15517 soft_i2c.c:196: warning: unused variable 'immr'
15518 soft_i2c.c: In function 'read_byte':
15519 soft_i2c.c:244: warning: unused variable 'immr'
15521 Signed-off-by: Heiko Schocher <hs@denx.de>
15523 commit 799b784aa00cb03a352847ab9f9acdde79b72d21
15524 Author: Heiko Schocher <hs@denx.de>
15525 Date: Wed Oct 15 09:34:45 2008 +0200
15527 i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.
15529 Signed-off-by: Heiko Schocher <hs@denx.de>
15531 commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd
15532 Author: Heiko Schocher <hs@denx.de>
15533 Date: Wed Oct 15 09:34:05 2008 +0200
15535 mgcoge: fix Coding Style issues.
15537 Signed-off-by: Heiko Schocher <hs@denx.de>
15539 commit e43a27c49712203fe8848a17714330623edfb2eb
15540 Author: Heiko Schocher <hs@denx.de>
15541 Date: Wed Oct 15 09:33:30 2008 +0200
15543 I2C: add new command i2c reset.
15545 If I2C Bus is blocked (see doc/I2C_Edge_Conditions),
15546 it is not possible to get out of this, until the
15547 complete Hardware gets a reset. This new commando
15548 calls again i2c_init (and that calls i2c_init_board
15549 if defined), which will deblock the I2C Bus.
15551 Signed-off-by: Heiko Schocher <hs@denx.de>
15552 Signed-off-by: Wolfgang Denk <wd@denx.de>
15554 commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686
15555 Author: Heiko Schocher <hs@denx.de>
15556 Date: Wed Oct 15 09:32:25 2008 +0200
15558 mgsuvd, mgcoge: move this 2 boards in one dir.
15560 There are some more extensions, which are for both boards
15561 and some more boards from this manufacturer will follow soon.
15563 Signed-off-by: Heiko Schocher <hs@denx.de>
15564 Signed-off-by: Wolfgang Denk <wd@denx.de>
15566 commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b
15567 Author: Dirk Eibach <eibach@gdsys.de>
15568 Date: Wed Oct 8 13:44:27 2008 +0200
15570 hwmon: Add LM63 support
15572 This patch adds support for the National LM63 temperature
15573 sensor with integrated fan control. It's used on the GDSys
15574 Neo board (405EP) which will be submitted later.
15576 Signed-off-by: Dirk Eibach <eibach@gdsys.de>
15577 Acked-by: Stefan Roese <sr@denx.de>
15579 commit 7ba890bf2f2b92831420243c058951aa831119fd
15580 Author: Kyungmin Park <kmpark@infradead.org>
15581 Date: Wed Oct 8 11:01:17 2008 +0900
15583 Add Red Black Tree support
15585 Now it's used at UBI module. Of course other modules can use it.
15586 If you want to use it, please define CONFIG_RBTREE
15588 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
15590 commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794
15591 Author: richardretanubun <richardretanubun@ruggedcom.com>
15592 Date: Mon Oct 6 16:10:53 2008 -0400
15594 CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c
15596 Added support for CONFIG_EFI_PARTITION to ext2 commands.
15597 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
15599 commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567
15600 Author: richardretanubun <richardretanubun@ruggedcom.com>
15601 Date: Fri Sep 26 11:13:22 2008 -0400
15603 Add support for CONFIG_EFI_PARTITION (GUID Partition Table)
15605 The GUID (Globally Unique Identifier) Partition Table (GPT) is a part
15606 of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table
15608 Based on linux/fs/partitions/efi.[ch]
15610 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
15612 commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374
15613 Author: Bartlomiej Sieka <tur@semihalf.com>
15614 Date: Wed Oct 1 15:26:32 2008 +0200
15616 FIT: output image load address for type 'firmware', fix message while there
15618 Now that the auto-update feature uses the 'firmware' type for updates, it is
15619 useful to inspect the load address of such images.
15621 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15623 commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275
15624 Author: Bartlomiej Sieka <tur@semihalf.com>
15625 Date: Wed Oct 1 15:26:31 2008 +0200
15627 Automatic software update from TFTP server
15629 The auto-update feature allows to automatically download software updates
15630 from a TFTP server and store them in Flash memory during boot. Updates are
15631 contained in a FIT file and protected with SHA-1 checksum.
15633 More detailed description can be found in doc/README.update.
15635 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
15636 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15638 commit 3f0cf51dabacc2724731c5079a60ea989103bb8f
15639 Author: Bartlomiej Sieka <tur@semihalf.com>
15640 Date: Wed Oct 1 15:26:27 2008 +0200
15642 flash: factor out adjusting of Flash address to the end of sector
15644 The upcoming automatic update feature needs the ability to adjust an
15645 address within Flash to the end of its respective sector. Factor out
15646 this functionality to a new function flash_sect_roundb().
15648 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
15649 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15650 Signed-off-by: Stefan Roese <sr@denx.de>
15652 commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5
15653 Author: Bartlomiej Sieka <tur@semihalf.com>
15654 Date: Wed Oct 1 15:26:29 2008 +0200
15656 net: Make TFTP server timeout configurable
15658 There are two aspects of a TFTP transfer involving timeouts:
15659 1. timeout waiting for initial server reply after sending RRQ
15660 2. timeouts while transferring actual data from the server
15662 Since the upcoming auto-update feature attempts a TFTP download during each
15663 boot, it is undesirable to have a long delay when the TFTP server is not
15664 available. Thus, this commit makes the server timeout (1.) configurable by two
15667 TftpRRQTimeoutMSecs
15668 TftpRRQTimeoutCountMax
15670 TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP
15671 server, TftpRRQTimeoutCountMax overrides default number of connection retries.
15672 The total delay when trying to download a file from a non-existing TFTP server
15673 is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds.
15675 Timeouts during file transfers (2.) are unaffected.
15677 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
15678 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15679 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15681 commit 49f3bdbba8071f56d950a9498b6cdb998b35340a
15682 Author: Bartlomiej Sieka <tur@semihalf.com>
15683 Date: Wed Oct 1 15:26:28 2008 +0200
15685 net: express the first argument to NetSetTimeout() in milliseconds
15687 Enforce millisecond semantics of the first argument to NetSetTimeout() --
15688 the change is transparent for well-behaving boards (CFG_HZ == 1000 and
15689 get_timer() countiing in milliseconds).
15691 Rationale for this patch is to enable millisecond granularity for
15692 network-related timeouts, which is needed for the upcoming automatic
15693 software update feature.
15695 Summary of changes:
15696 - do not scale the first argument to NetSetTimeout() by CFG_HZ
15697 - change timeout values used in the networking code to milliseconds
15699 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
15700 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15701 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15703 commit c68a05feeb88de9fcf158e67ff6423c4cc988f88
15704 Author: richardretanubun <richardretanubun@ruggedcom.com>
15705 Date: Mon Sep 29 18:28:23 2008 -0400
15707 Adds two more ethernet interface to 83xx
15709 Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
15710 Six eth interface is chosen because the platform I am using combines
15711 UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.
15713 Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
15714 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15716 commit 41410eee472b0f42e03a77f961bbc55ef58f3c01
15717 Author: Haiying Wang <Haiying.Wang@freescale.com>
15718 Date: Wed Sep 24 11:42:12 2008 -0500
15720 Change UEC PHY interface to RGMII on MPC8568MDS
15722 Change UEC phy interface from GMII to RGMII on MPC8568MDS board
15724 Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed,
15725 but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable.
15727 Now both UEC1 and UEC2 can work properly under u-boot.
15729 It is also in consistent with the kernel setting for 8568 UEC phy interface.
15731 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
15732 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15734 commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192
15735 Author: Wolfgang Denk <wd@denx.de>
15736 Date: Sat Oct 18 21:30:31 2008 +0200
15738 Prepare v2008.10 release: update CHANGELOG & Makefile
15740 Signed-off-by: Wolfgang Denk <wd@denx.de>
15742 commit f7a35a60cf45491871a5c28e9ad24db005487857
15743 Author: Heiko Schocher <hs@denx.de>
15744 Date: Fri Oct 17 18:24:06 2008 +0200
15746 mgcoge: add redundant environment sector
15748 Signed-off-by: Heiko Schocher <hs@denx.de>
15749 Signed-off-by: Wolfgang Denk <wd@denx.de>
15751 commit c2537ee85954af9d036b18b644f3e18d837bf4a5
15752 Author: Heiko Schocher <hs@denx.de>
15753 Date: Fri Oct 17 18:23:27 2008 +0200
15755 mgsuvd: update size of environment
15757 Signed-off-by: Heiko Schocher <hs@denx.de>
15759 commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
15760 Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
15761 Date: Thu Oct 16 13:38:00 2008 -0500
15763 83xx NAND boot: wait for LTESR[CC]
15765 At least some revisions of the 8313, and possibly other chips, do not
15766 wait for all pages of the initial 4K NAND region to be loaded before
15767 beginning execution; thus, we wait for it before branching out of the
15770 This fixes warm reset problems when booting from NAND on 8313erdb.
15772 Signed-off-by: Scott Wood <scottwood@freescale.com>
15773 Acked-by: Kim Phillips <kim.phillips@freescale.com>
15775 commit bf29e0ea0af03d593c64614136acc723a7a022a2
15776 Author: Yuri Tikhonov <yur@emcraft.com>
15777 Date: Fri Oct 17 12:54:18 2008 +0200
15779 ppc4xx: PPC44x MQ initialization
15781 Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
15782 values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
15783 dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
15785 Previously the appropriate initialization had been made in Linux, by the
15786 ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
15787 registers after normal operation has begun is not supported and could
15788 have unpredictable results.
15790 Comment from Stefan: This patch doesn't change the resulting value of the
15791 MQ registers. It explicitly sets/clears all bits to the desired state which
15792 better documents the resulting register value instead of relying on pre-set
15795 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
15796 Signed-off-by: Stefan Roese <sr@denx.de>
15798 commit ec081c2c190148b374e86a795fb6b1c49caeb549
15799 Author: Stefan Roese <sr@denx.de>
15800 Date: Fri Oct 17 12:51:46 2008 +0200
15802 ppc4xx: PPC44x MQ initialization
15804 Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
15805 values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
15806 dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
15808 Previously the appropriate initialization had been made in Linux, by the
15809 ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
15810 registers after normal operation has begun is not supported and could
15811 have unpredictable results.
15813 Comment from Stefan: This patch doesn't change the resulting value of the
15814 MQ registers. It explicitly sets/clears all bits to the desired state which
15815 better documents the resulting register value instead of relying on pre-set
15818 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
15819 Signed-off-by: Stefan Roese <sr@denx.de>
15821 commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
15822 Author: Kumar Gala <galak@kernel.crashing.org>
15823 Date: Thu Oct 16 21:58:50 2008 -0500
15825 85xx: Using proper I2C source clock divider for MPC8544
15827 The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
15828 bit 26, instead it should be bit 28. This caused in incorrect
15829 interpretation of the i2c_clk which is the same as the SEC clk on
15830 MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
15833 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15835 commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
15836 Author: Kumar Gala <galak@kernel.crashing.org>
15837 Date: Thu Oct 16 21:58:49 2008 -0500
15839 Revert "85xx: Using proper I2C source clock divider for MPC8544"
15841 This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
15843 The fix introduced by this patch is not correct. The problem is
15844 that the documentation is not correct for the MPC8544 with regards
15845 to which bit in PORDEVSR2 is for the SEC_CFG.
15847 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15849 commit 2179c4766bffeece98e5e92040629a96c97e230c
15850 Author: Kumar Gala <galak@kernel.crashing.org>
15851 Date: Wed Oct 15 10:19:41 2008 -0500
15853 85xx: Fix compile warning
15855 mpc8536ds.c: In function 'is_sata_supported':
15856 mpc8536ds.c:614: warning: unused variable 'devdisr'
15858 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15860 commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
15861 Author: Jason Jin <Jason.jin@freescale.com>
15862 Date: Wed Oct 15 10:40:24 2008 +0800
15864 Fix the function conflict in x86emu when DEBUG is on
15866 The function parse_line() in common/main.c was exposed globally by commit
15867 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
15868 name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
15869 This patch fix this by renaming the function in the debug.c file.
15871 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15873 commit b4dbacf69a669a17487054552fc2761149dd6767
15874 Author: Wolfgang Denk <wd@denx.de>
15875 Date: Wed Oct 15 15:50:45 2008 +0200
15877 Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
15879 Signed-off-by: Wolfgang Denk <wd@denx.de>
15881 commit 374b9038293d01d8744a46af9b7854a6fd99b228
15882 Author: Heiko Schocher <hs@denx.de>
15883 Date: Wed Oct 15 09:51:19 2008 +0200
15885 Fix compiler warning in lib_ppc/board.c
15887 Fix compiler warning introduced by commit 0f8cbc18
15889 Signed-off-by: Heiko Schocher <hs@denx.de>
15890 Signed-off-by: Wolfgang Denk <wd@denx.de>
15892 commit 9724555755a6f1066636481b41f7094e0ce93a69
15893 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
15894 Date: Thu Oct 9 10:29:14 2008 +0530
15896 mpc83xx: wait till UPM completes the write to array
15898 Reference manual states that MxMR[MAD] increment is the indication
15899 of write to UPM array is complete. Honour that. Also, make the dummy
15902 also fix the comment.
15904 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
15905 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15907 commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
15908 Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
15909 Date: Wed Oct 8 18:12:20 2008 -0500
15911 Remove unwanted ';' at end of define.
15913 Currently this is not creating any problem. But it will result
15914 in compilation error when used as below.
15916 printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
15918 Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
15920 continuation of the theme based on git grep "^#define CFG_.*;$" include/
15922 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15924 commit b2934a56650e9a6c54432f9ce6dc36757967385e
15925 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
15926 Date: Mon Oct 6 10:53:59 2008 -0400
15928 ARM DaVinci: Add maintainer information for SFFSDR board.
15930 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
15932 commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
15933 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15934 Date: Sat Oct 4 19:26:16 2008 +0200
15936 api: fix type mismatch
15938 This patch fixes a type mismatch and thus removes a compiler
15939 warning when compiling with CONFIG_API on powerpc.
15941 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
15943 commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
15944 Author: Peter Tyser <ptyser@xes-inc.com>
15945 Date: Wed Oct 1 12:25:04 2008 -0500
15947 cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
15949 Original code displayed:
15951 i2c i2c speed [speed] - show or set I2C bus speed
15952 i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
15955 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
15957 commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
15958 Author: Wolfgang Denk <wd@denx.de>
15959 Date: Tue Oct 14 22:13:41 2008 +0200
15963 Signed-off-by: Wolfgang Denk <wd@denx.de>
15965 commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
15966 Author: Jason Jin <Jason.jin@freescale.com>
15967 Date: Fri Oct 10 11:41:01 2008 +0800
15969 Do not init SATA when disabled on 8536DS.
15971 SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
15972 driver still try to access the SATA registers, the cpu will hangup.
15973 This patch try to fix this by reading the serdes status before the SATA
15976 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
15977 Acked-by: Andy Fleming <afleming@freescale.com>
15979 commit 9dbc366744960013965fce8851035b6141f3b3ae
15980 Author: Remy Bohmer <linux@bohmer.net>
15981 Date: Fri Oct 10 10:23:22 2008 +0200
15983 The PIPE_INTERRUPT flag is used wrong
15985 At a lot of places in the code the PIPE_INTERRUPT flags and friends
15986 are used wrong. The wrong bits are compared to this flag resulting
15987 in wrong conditions. Also there are macros that should be used for
15989 This patch tries to fix them all, however, I was not able to test the
15990 changes, because I do not have any of these boards.
15994 Signed-off-by: Remy Bohmer <linux@bohmer.net>
15995 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
15997 commit 48867208444cb2a82e2af9c3249e90b7ed4a1751
15998 Author: Remy Bohmer <linux@bohmer.net>
15999 Date: Fri Oct 10 10:23:21 2008 +0200
16001 fix USB initialisation procedure
16003 The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes.
16004 At some places directly 8,16,32,64 was used instead of the encoded
16005 value. Made a enum for the options to make this more clear and to help
16006 preventing similar errors in the future.
16008 After fixing this bug it became clear that another bug existed where
16009 the 'pipe' is and-ed with PIPE_* flags, where it should have been
16010 'usb_pipetype(pipe)', or even better usb_pipeint(pipe).
16012 Also removed the triple 'get_device_descriptor' sequence, it has no use,
16013 and Windows nor Linux behaves that way.
16014 There is also a poll going on with a timeout when usb_control_msg() fails.
16015 However, the poll is useless, because the flag will never be set on a error,
16016 because there is no code that runs in a parallel that can set this flag.
16017 Changed this to something more logical.
16019 Tested on AT91SAM9261ek and compared the flow on the USB bus to what
16020 Linux is doing. There is no difference anymore in the early initialisation
16023 Signed-off-by: Remy Bohmer <linux@bohmer.net>
16024 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16026 commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
16027 Author: Nikita V. Youshchenko <yoush@cs.msu.su>
16028 Date: Fri Oct 3 00:03:55 2008 +0400
16030 fsl_diu: fix alignment error that caused malloc corruption
16032 When aligning malloc()ed screen_base, invalid offset was added.
16033 This not only caused misaligned result (which did not cause hardware
16034 misbehaviour), but - worse - caused screen_base + smem_len to
16035 be out of malloc()ed space, which in turn caused breakage of
16036 futher malloc()/free() operation.
16038 This patch fixes screen_base alignment.
16040 Also this patch makes memset() that cleans framebuffer to be executed
16041 on first initialization of diu, not only on re-initialization. It looks
16042 correct to clean the framebuffer instead of displaying random garbage;
16043 I believe that was disabled only because that memset caused breakage
16044 of malloc/free described above - which no longer happens with the fix
16047 Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
16049 commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
16050 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16051 Date: Wed Sep 24 10:29:37 2008 +0200
16053 api: Fix building with CONFIG_API
16055 This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
16057 USB_MAX_STOR_DEV is defined in include/usb.h, but
16058 needed in api/api_storage.c.
16060 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16062 commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
16063 Author: Peter Tyser <ptyser@xes-inc.com>
16064 Date: Tue Sep 23 12:39:40 2008 -0500
16066 Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
16068 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
16070 commit 81e612014c40c922ec35488d17c504d4e9286f06
16071 Author: Peter Tyser <ptyser@xes-inc.com>
16072 Date: Tue Sep 23 12:38:42 2008 -0500
16074 Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
16076 The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
16077 CFG_EEPROM_PAGE_WRITE_BITS in various temperature
16078 sensor drivers are not necessary
16080 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
16082 commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
16083 Author: Mike Frysinger <vapier@gentoo.org>
16084 Date: Tue Oct 14 07:04:38 2008 -0400
16086 cmd_spi: remove broken signed casting for display
16088 Since we're working with unsigned data, you can't apply a signed pointer
16089 cast and then attempt to print the result. Otherwise you get wrong output
16090 when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
16092 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16094 commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
16095 Author: Mike Frysinger <vapier@gentoo.org>
16096 Date: Tue Oct 14 07:05:24 2008 -0400
16098 strings cmd: drop old CONFIG_CFG_STRINGS define
16100 We don't need CONFIG_CFG_STRINGS anymore now that we have the define
16101 CONFIG_CMD_STRINGS and Makefile control.
16103 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16105 commit fecb5ade3b37f62981f2b05b621005850173aaa9
16106 Author: Jason Jin <Jason.jin@freescale.com>
16107 Date: Fri Sep 19 17:32:49 2008 +0800
16109 Fix the NAND size overflow issue.
16111 When the total size of all NAND devices exceeds 4 GiB, the size will
16112 overflow. This patch tries to fix this.
16114 Note that we still have a problem when a single NAND device is bigger
16115 than 4 GiB: then the overflow would actually happen earlier, i. e.
16116 when storing the size in nand_info[].size, as nand_info[].size is an
16119 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
16120 Signed-off-by: Wolfgang Denk <wd@denx.de>
16122 commit 30f574717277238b9014b8136c90eea77196490f
16123 Author: Louis Su <louis@asix.com.tw>
16124 Date: Wed Jul 9 11:01:37 2008 +0800
16126 AX88180: new gigabit network driver
16128 Signed-off-by: Louis Su <louis@asix.com.tw>
16129 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16131 commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
16132 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
16133 Date: Tue Aug 19 16:07:03 2008 +0200
16135 enable 10/100M at VSC8601 at tsec driver
16137 Currently VSC8601 doesn't link with 10/100M partners if the
16138 EEPROM/Strapping is not set up.
16139 Setting the auto-neg register fixes this.
16141 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
16142 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16144 commit 702c85b0e876d587c11acdbb55738ee52acd54f4
16145 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16146 Date: Tue Sep 30 15:02:53 2008 +0900
16148 net: ne2000: Divided a function of NE2000 driver
16150 get_prom function was used __attriute__ , but it is not enable.
16151 ax88796.o does not do link besides ne2000.o. When ld is carried
16152 out, get_prom function of ax88796.c is ignored.
16153 This problem is a thing by specifications of ld.
16154 I checked and test this patch on SuperH and MIPS.
16156 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16157 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16159 commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
16160 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16161 Date: Tue Oct 14 11:10:59 2008 +0900
16163 sh: rsk7203: Add smc911x driver support to board config file
16165 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16166 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16168 commit cae6f909baf86357b3c0bd01acfc414348c4d175
16169 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16170 Date: Thu Oct 9 13:54:33 2008 +0900
16172 sh: Fix cannot execute a stand-alone application
16174 Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
16176 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16177 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16179 commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
16180 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16181 Date: Wed Oct 8 23:38:00 2008 -0500
16183 fsl_pci_init do not scan bus when configured as an end-point
16185 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16186 Acked-by: Andy Fleming <afleming@freescale.com>
16188 commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
16189 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
16190 Date: Tue Sep 16 17:07:53 2008 -0400
16192 ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
16194 This is no longer necessary now that the GD_FLG_RELOC flag is set for
16197 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
16199 commit d977a57356657ba241256231efca32828a5822f9
16200 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
16201 Date: Sat Sep 13 10:04:32 2008 +0200
16203 Fix lzma uncompress call (image_start wrongly used instead image_len)
16205 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
16207 commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
16208 Author: Nick Spence <nick.spence@freescale.com>
16209 Date: Thu Aug 28 14:09:15 2008 -0700
16211 mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
16213 This is needed in unlock_ram_in_cache() because it is called from C and
16214 will corrupt the small data area anchor that is kept in R2.
16216 lock_ram_in_cache() is modified similarly as good coding practice, but
16217 is not called from C.
16219 Signed-off-by: Nick Spence <nick.spence@freescale.com>
16221 commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
16222 Author: Kumar Gala <galak@kernel.crashing.org>
16223 Date: Tue Aug 19 15:05:34 2008 -0500
16225 86xx: remove redudant code with lib_ppc/interrupts.c
16227 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
16228 Not know how that happened, but there is no good reason for it.
16230 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
16233 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16235 commit 0d01f66d235118515b5086b88f82498bc0695d6a
16236 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
16237 Date: Thu Oct 9 01:26:36 2008 -0500
16239 CFI: cfi_flash write fix for AMD legacy
16241 The flash_unlock_seq requires a sector for AMD_LEGACY.
16242 Fix a retcode check typeo.
16244 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
16245 Signed-off-by: Stefan Roese <sr@denx.de>
16247 commit 542b385a620a1783454a00424930e51895f45073
16248 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16249 Date: Tue Oct 7 13:13:10 2008 +0200
16251 ppc4xx: Fix USB 2.0 phy reset sequence
16253 This patch fixes USB 2.0 communication issues on some DU440 boards.
16255 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16256 Signed-off-by: Stefan Roese <sr@denx.de>
16258 commit df8c1ce11114c2260dedb5547281945f7db8fa5c
16259 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16260 Date: Tue Oct 7 13:13:09 2008 +0200
16262 ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
16264 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16265 Signed-off-by: Stefan Roese <sr@denx.de>
16267 commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
16268 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16269 Date: Tue Oct 7 13:13:08 2008 +0200
16271 ppc4xx: Fix DU440 GPIO configuration
16273 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16274 Signed-off-by: Stefan Roese <sr@denx.de>
16276 commit 35dd025c70fcc4389317db2f2a9d14795172137d
16277 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16278 Date: Tue Oct 7 13:13:07 2008 +0200
16280 ppc4xx: Update DU440 config
16282 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16283 Signed-off-by: Stefan Roese <sr@denx.de>
16285 commit f3bf9273939ffe1a60a32a2eef909097f15df56b
16286 Author: Kumar Gala <galak@kernel.crashing.org>
16287 Date: Wed Oct 8 15:36:39 2008 -0500
16289 MPC8572DS: Fix compile warnings
16291 Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
16294 cmd_i2c.c:112: warning: missing braces around initializer
16295 cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
16297 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16299 commit dffd2446fb041f38ef034b0fcf41e51e5e489159
16300 Author: Wolfgang Grandegger <wg@grandegger.com>
16301 Date: Tue Sep 30 10:55:57 2008 +0200
16303 85xx: Using proper I2C source clock divider for MPC8544
16305 Measurements with our MPC8544 board showed that the I2C bus frequency
16306 is wrong by a factor of 1.5. Obviously, the interpretation of the
16307 MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
16308 correct. There seems to be an error in the 8544 RM.
16310 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
16312 commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
16313 Author: Rafal Czubak <rcz@semihalf.com>
16314 Date: Wed Oct 8 13:41:30 2008 +0200
16316 FSL: Fix get_cpu_board_revision() return value.
16318 get_cpu_board_revision() returned board revision based on information stored
16319 in global static struct eeprom. It should instead use one from local struct
16320 board_eeprom, to which the data is actually read from EEPROM. The bug led to
16321 system hang after printing L1 cache information on U-Boot startup. The problem
16322 was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
16323 boards using CFG_I2C_EEPROM_CCID.
16325 The change has been successfully tested on MPC8555CDS system.
16327 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
16329 commit 747f316cca484ed627a97dd3391febabce384186
16330 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16331 Date: Tue Sep 30 20:08:49 2008 +0200
16333 update uImage FIT multi documentation
16335 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16337 commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
16338 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16339 Date: Tue Sep 30 20:08:36 2008 +0200
16341 move README.imx31 to doc/ and merge with README.mx31
16343 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16345 commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
16346 Author: Guennadi Liakhovetski <lg@denx.de>
16347 Date: Thu Sep 25 20:54:37 2008 +0200
16349 i.MX31: switch to CFG_HZ=1000
16351 Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
16352 cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
16353 provides 2% or 0.4% precision depending on the
16354 CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
16357 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16359 commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
16360 Author: gnusercn <gnusercn@gmail.com>
16361 Date: Wed Oct 8 18:58:58 2008 +0200
16363 Fix bug: in arch-arm, env_get_char dose not work fine
16365 due to the arm implementation which supposed that U-Boot is in RAM
16366 when we jump to start_armboot
16368 Signed-off-by: gnusercn <gnusercn@gmail.com>
16369 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16371 commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
16372 Author: Adam Graham <agraham@amcc.com>
16373 Date: Mon Oct 6 10:16:13 2008 -0700
16375 ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
16377 After changing SDRAM_CLKTR phase value rerun the memory preload
16378 initialization sequence (INITPLR) to reset and relock the memory
16379 DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
16380 adjustment effects the phase relationship of the internal, to the
16381 PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
16383 Signed-off-by: Adam Graham <agraham@amcc.com>
16384 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
16385 Signed-off-by: Stefan Roese <sr@denx.de>
16387 commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
16388 Author: Haiying Wang <Haiying.Wang@freescale.com>
16389 Date: Fri Oct 3 11:48:03 2008 -0400
16391 Remove redundant #define for MPC8536DS
16393 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16395 commit 445a7b38308eb05b41de74165b20855db58c7ee5
16396 Author: Haiying Wang <Haiying.Wang@freescale.com>
16397 Date: Fri Oct 3 11:47:30 2008 -0400
16399 Add ID EEPROM support for MPC8572DS
16401 The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
16402 system information like mac addresses etc. This patch enables it.
16404 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16406 commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
16407 Author: Haiying Wang <Haiying.Wang@freescale.com>
16408 Date: Fri Oct 3 11:46:59 2008 -0400
16410 Minor fixes for I2C address on MPC8572DS
16412 MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
16413 according to the board spec, and adds the 2nd i2c bus offset.
16415 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
16417 commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
16418 Author: Jason Jin <Jason.jin@freescale.com>
16419 Date: Sat Sep 27 14:40:57 2008 +0800
16421 Fix the incorrect DDR clk freq reporting on 8536DS
16423 On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
16424 The display is still sync mode DDR freq. This patch try to fix
16425 this. The display DDR freq is now the actual freq in both
16426 sync and async mode.
16428 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
16430 commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
16431 Author: Kumar Gala <galak@kernel.crashing.org>
16432 Date: Tue Oct 7 10:28:46 2008 -0500
16434 85xx: Remove setting of *cache-line-size in device trees
16436 ePAPR says if the *cache-block-size is the same as *cache-line-size
16437 than we don't need the *cache-line-size property.
16439 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
16441 commit a69a42338dd25408f9fd5390a83bc501749c7e1b
16442 Author: Mark Jackson <mpfj@mimc.co.uk>
16443 Date: Fri Oct 3 11:48:57 2008 +0100
16445 MIMC200 board now uses CONFIG_DISABLE_CONSOLE
16447 Changed MIMC200 board setup and config to use CONFIG_DISABLE_CONSOLE.
16448 Also fixed default uImage location.
16450 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
16451 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
16453 commit cd3cb0d9269d155276b00207e3816a9347fd1c92
16454 Author: Gerald Van Baren <vanbaren@cideas.com>
16455 Date: Sat Oct 4 07:56:06 2008 -0400
16457 libfdt: Fix error in documentation for fdt_get_alias_namelen()
16459 Oops, screwed up the function name in the documenting comment for this
16460 function. Trivial correction in this patch.
16462 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16463 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
16465 commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
16466 Author: David Gibson <david@gibson.dropbear.id.au>
16467 Date: Wed Aug 20 16:55:14 2008 +1000
16469 libfdt: Add function to explicitly expand aliases
16471 Kumar has already added alias expansion to fdt_path_offset().
16472 However, in some circumstances it may be convenient for the user of
16473 libfdt to explicitly get the string expansion of an alias. This patch
16474 adds a function to do this, fdt_get_alias(), and uses it to implement
16477 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16479 commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
16480 Author: Mike Frysinger <vapier@gentoo.org>
16481 Date: Thu Oct 2 01:55:38 2008 -0400
16483 cfi_flash: do not reset flash when probe fails
16485 The CFI flash driver starts at flash_init() which calls down into
16486 flash_get_size(). This starts by calling flash_detect_cfi(). If said
16487 function fails, flash_get_size() finishes by attempting to reset the
16488 flash. Unfortunately, it does this with an info->portwidth set to 0x10
16489 which filters down into flash_make_cmd() and that happily smashes the
16490 stack by sticking info->portwidth bytes into a cfiword_t variable that
16491 lives on the stack. On a 64bit system you probably won't notice, but
16492 killing the last 8 bytes on a 32bit system usually leads to a corrupt
16493 return address. Which is what happens on a Blackfin system.
16495 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16496 Signed-off-by: Stefan Roese <sr@denx.de>
16498 commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
16499 Author: Stefan Roese <sr@denx.de>
16500 Date: Fri Sep 26 17:03:26 2008 +0200
16502 fdt: Overwrite /chosen node in bootm if it already exists in the dtb
16504 Set force parameter in fdt_chosen() call in do_bootm_linux() call.
16505 Without this, the chosen node is not overwritten if it already
16508 Signed-off-by: Stefan Roese <sr@denx.de>
16510 commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
16511 Author: Jon Loeliger <jdl@freescale.com>
16512 Date: Thu Sep 25 11:02:17 2008 -0500
16514 Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
16516 Using Gcc 4.3 detected this problem:
16518 ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
16519 ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
16520 occur when assuming that (X + c) < X is always false
16522 To fix the problem, treat the offset as an unsigned int.
16524 The problem report and proposed fix were provided
16525 by Steve Papacharalambous <stevep@freescale.com>.
16527 Signed-off-by: Jon Loeliger <jdl@freescale.com>
16529 commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
16530 Author: David Gibson <david@gibson.dropbear.id.au>
16531 Date: Fri Aug 29 14:19:13 2008 +1000
16533 libfdt: Fix bugs in fdt_get_path()
16535 The current implementation of fdt_get_path() has a couple of bugs,
16536 fixed by this patch.
16538 First, contrary to its documentation, on success it returns the length
16539 of the node's path, rather than 0. The testcase is correspondingly
16540 wrong, and the patch fixes this as well.
16542 Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
16543 instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
16544 Specifically this happens when there is insufficient space even to
16545 hold the path's second last component. This behaviour is corrected,
16546 and the testcase updated to check it.
16548 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
16550 commit 33af3e6656e84660d397b5dd95abab2dccc36f83
16551 Author: Wolfgang Denk <wd@denx.de>
16552 Date: Wed Oct 1 12:34:58 2008 +0200
16554 TQM5200: enable support for ATAPI devices
16556 Signed-off-by: Wolfgang Denk <wd@denx.de>
16558 commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
16559 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16560 Date: Mon Sep 15 05:48:25 2008 +0200
16562 Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
16564 we need this due to the arm implementation which supposed that U-Boot
16565 is in RAM when we jump to start_armboot
16567 This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
16568 in order to do it for all arm board
16570 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16572 commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
16573 Author: Kim Phillips <kim.phillips@freescale.com>
16574 Date: Wed Sep 24 08:46:25 2008 -0500
16576 mpc83xx: don't disable autoboot
16578 bootdelay set to -1 'permanently' disables autobooting, even if
16579 bootcmd is specified. Change to a positive value to allow
16580 autobooting when a bootcmd is set.
16582 Reported-by: Coray Tate <Coray.Tate@freescale.com>
16583 Cc: Scott Wood <scottwood@freescale.com>
16584 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16586 commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
16587 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16588 Date: Wed Sep 24 10:42:15 2008 +0900
16590 mpc83xx: Fix typo in include/mpc83xx.h
16592 Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
16594 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16595 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16597 commit 162c41c03179727a1d14262f703c9a8bc40231fa
16598 Author: Kim Phillips <kim.phillips@freescale.com>
16599 Date: Tue Sep 23 09:38:49 2008 -0500
16601 mpc83xx: add h/w flash protection to board configs
16603 the operating system may leave flash in a h/w locked state after writing.
16604 This allows u-boot to continue to write flash by enabling h/w unlocking
16607 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16609 commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
16610 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
16611 Date: Thu Sep 11 21:35:36 2008 +0400
16613 mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
16615 The spd_dram code shifts the base address, then masks 20 bits, but
16616 forgets to shift the base address back. Fix this by just masking the
16617 base address correctly.
16619 Found this bug while trying to relocate a DDR memory at the base != 0.
16621 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
16622 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16624 commit 8fd4166c467a46773f80208bda1ec3b4757747bc
16625 Author: Stefan Roese <sr@denx.de>
16626 Date: Mon Sep 22 16:10:43 2008 +0200
16628 ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
16630 Depending on the configuration jumper "SATA SELECT", U-Boot disabled
16631 either one PCIe node or the SATA node in the device tree blob. This
16632 patch removes the unnecessary and even confusing warning, when the node
16633 is not found at all.
16635 Signed-off-by: Stefan Roese <sr@denx.de>
16637 commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
16638 Author: Remy Bohmer <linux@bohmer.net>
16639 Date: Fri Sep 19 13:30:06 2008 +0200
16641 Add missing device types to dev_print() in part.c
16643 Signed-off-by: Remy Bohmer <linux@bohmer.net>
16645 commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
16646 Author: Wolfgang Denk <wd@denx.de>
16647 Date: Mon Sep 22 22:23:06 2008 +0200
16649 Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
16650 eventually leads to a machine check. This change assures that DPRAM
16651 is allocated only once in that case.
16653 Signed-off-by: Gary Jennejohn <garyj@denx.de>
16654 Signed-off-by: Wolfgang Denk <wd@denx.de>
16656 commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
16657 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
16658 Date: Wed Sep 17 17:57:34 2008 +0200
16660 Fix Spartan-3 definitions.
16662 A few Spartan-3 definitions erroneously use Spartan-3E size
16663 constants. This patch fixes them.
16665 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
16667 commit 28113e1f0da4146b823ffce37680d31d5685a60b
16668 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
16669 Date: Wed Sep 17 17:41:58 2008 +0200
16671 Remove duplicate Spartan-3E definition.
16673 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
16674 Signed-off-by: Wolfgang Denk <wd@denx.de>
16676 commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
16677 Author: Anatolij Gustschin <agust@denx.de>
16678 Date: Wed Sep 17 13:46:17 2008 +0200
16680 socrates: change default mtest address range
16682 Running mtest command on socrates without specifying
16683 an address range crashes the board. This patch changes
16684 default mtest address range to prevent this behavior.
16686 Signed-off-by: Anatolij Gustschin <agust@denx.de>
16688 commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
16689 Author: Anatolij Gustschin <agust@denx.de>
16690 Date: Wed Sep 17 12:34:45 2008 +0200
16692 socrates: fix crash after relocation
16694 Currently U-Boot crashes after relocation to RAM.
16695 Changing the CPO value of the DDR SDRAM TIMING_CFG_2
16696 register to READ_LAT + 1 (to the value it was before
16697 conversion of socrates to new DDR code) fixes the
16700 Signed-off-by: Anatolij Gustschin <agust@denx.de>
16702 commit 562788b0a303f3528b920d81f547f5ca77ba528e
16703 Author: Anatolij Gustschin <agust@denx.de>
16704 Date: Wed Sep 17 11:45:51 2008 +0200
16706 socrates: fix SPD EEPROM address
16708 Commit be0bd8234b9777ecd63c4c686f72af070d886517
16709 changed SPD EEPROM address to 0x51 and DDR SDRAM
16710 detection stopped working. Change this address
16713 Signed-off-by: Anatolij Gustschin <agust@denx.de>
16715 commit 023824549a370bd185d7129d9a6c86f9be7b86a8
16716 Author: Stefan Roese <sr@denx.de>
16717 Date: Mon Sep 22 11:06:50 2008 +0200
16719 Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
16721 This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
16723 Signed-off-by: Stefan Roese <sr@denx.de>
16725 commit e58c41e26cf3c8accd60311be579f452e368e97e
16726 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16727 Date: Thu Sep 18 20:13:08 2008 +0900
16729 usb: Fix compile warning of r8a66597-hcd
16731 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16732 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16734 commit b5d10a13525c07ec6374adf840d7c87553b5f189
16735 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16736 Date: Thu Sep 18 19:34:36 2008 +0900
16738 sh: Fix compile warning
16740 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16742 commit 4a065abf926f128beb36d93449defa0d690e7fef
16743 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16744 Date: Thu Sep 18 19:04:26 2008 +0900
16746 sh: Add support watchdog for SH4A core
16748 Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
16749 And fix some compile warning.
16751 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16753 commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
16754 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16755 Date: Wed Sep 17 11:45:26 2008 +0900
16757 sh: Fix typo in SH serial driver
16759 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16760 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16762 commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
16763 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16764 Date: Wed Sep 17 11:08:36 2008 +0900
16766 sh: Add support any page size and empty_zero_page to SH Linux uImage
16768 Old U-Boot supported 4KB page size only. If this version, Linux
16769 kernel can not get command line from U-Boot.
16770 SH Linux kernel can change page size and empty_zero_page.
16771 This patch support this function and fix promlem.
16773 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16774 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16776 commit ce9f99ddb59628f41dc534e892368a7d66dfc774
16777 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16778 Date: Thu Aug 28 13:40:52 2008 +0900
16780 sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
16782 Add function of smc911x, pkt_data_pull and pkt_data_push.
16784 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16785 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16787 commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
16788 Author: Wolfgang Denk <wd@denx.de>
16789 Date: Thu Sep 18 13:57:32 2008 +0200
16791 ADS5121: fix typo in "rootpath" default setting
16793 Signed-off-by: Wolfgang Denk <wd@denx.de>
16795 commit c9e8436b10cca53fca4904ecbadcd6231ad72c38
16796 Author: Remy Bohmer <linux@bohmer.net>
16797 Date: Tue Sep 16 14:55:44 2008 +0200
16799 USB layer of U-Boot causes USB protocol errors while using USB memory sticks
16801 There are several differences between Linux, Windows and U-boot for initialising the
16802 USB devices. While analysing the behaviour of U-boot it turned out that U-boot does
16803 things really different, and some are wrong (compared to the USB standard).
16805 This patch fixes some errors:
16806 * The NEW_init procedure that was already in the code is good, while the old procedure
16807 is wrong. See code comments for more info.
16808 * On a Control request the data returned by the device can be more than 8 bytes, while
16809 the host limits it to 8 bytes. This caused the host to generate a DataOverrun error.
16810 This results in a lot of USB sticks not being recognised, and the transmission ended
16811 frequently with a CTL:TIMEOUT Error.
16812 * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure.
16814 Signed-off-by: Remy Bohmer <linux@bohmer.net>
16815 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16817 commit 6f5794a6f78b313231256958fd73673c6aacc116
16818 Author: Remy Bohmer <linux@bohmer.net>
16819 Date: Tue Sep 16 14:55:43 2008 +0200
16821 Refactoring parts of the common USB OHCI code
16823 This patch refactors some large routines of the USB OHCI code by
16824 making some routines smaller and more readable which helps
16825 debugging and understanding the code. (Makes the code looks
16826 somewhat more like the Linux implementation.)
16828 Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant)
16830 Signed-off-by: Remy Bohmer <linux@bohmer.net>
16831 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16833 commit be19d324edc1a1d7f393d24e10d164cd94c91a00
16834 Author: Remy Bohmer <linux@bohmer.net>
16835 Date: Tue Sep 16 14:55:42 2008 +0200
16837 Fix for USB sticks not working on ARM while using GCC 4.x compilers
16839 The GCC-compiler makes an optimisation error while optimising the routine
16840 usb_set_maxpacket(). This should be fixed in the compiler in the first place,
16841 but there lots of compilers out there that makes this error, that it is
16842 probably wiser to workaround it in U-boot itself.
16844 What happens is that the register r3 is used as loop-counter 'i', but gets
16845 overwritten later on. From there it starts using register r3 for several other
16846 things and the assembler code is becoming a big mess. This is clearly a compiler bug.
16848 This error occurs on at least several versions of Code Sourcery Lite compilers
16849 for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other
16850 compilers, while compiling for armv4t, or armv5te with Os, O1 and O2.
16852 We work around it by splitting up this routine in 2 parts, and making sure that
16853 the split out part is NOT inlined any longer. This will make GCC spit out assembler
16854 that do not show this problem. Another possibility is to adapt the Makefile to stop
16855 optimisation for the complete file. I think this solution is nicer.
16857 Signed-off-by: Remy Bohmer <linux@bohmer.net>
16858 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
16860 commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
16861 Author: Wolfgang Denk <wd@denx.de>
16862 Date: Wed Sep 17 10:17:55 2008 +0200
16864 Coding style cleanup; update CHANEGLOG
16866 Signed-off-by: Wolfgang Denk <wd@denx.de>
16868 commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
16869 Author: Victor Gallardo <vgallardo@amcc.com>
16870 Date: Tue Sep 16 06:59:13 2008 -0700
16872 ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
16874 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
16875 Signed-off-by: Adam Graham <agraham@amcc.com>
16876 Signed-off-by: Stefan Roese <sr@denx.de>
16878 commit ce47eb402c5e29a025399dc282246414fc492940
16879 Author: Peter Tyser <ptyser@xes-inc.com>
16880 Date: Tue Sep 16 10:04:47 2008 -0500
16882 Support for multiple SGMII/TBI interfaces for TSEC ethernet
16884 Fix TBI PHY accesses to use the proper offset in CPU register space. The
16885 previous code would incorrectly access the TBI PHY by reading/writing to CPU
16886 register space at the same location as would be used to access external PHYs.
16888 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
16889 Acked-by: Andy Fleming <afleming@freescale.com>
16891 commit 7c803be2eb3cae245dedda438776e08fb122250f
16892 Author: Wolfgang Denk <wd@denx.de>
16893 Date: Tue Sep 16 18:02:19 2008 +0200
16895 TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
16897 After switching to using the CFI flash driver, the correct remapping
16898 of the flash banks was forgotten.
16900 Also, some boards were not adapted, and the old legacy flash driver
16901 was not removed yet.
16903 Signed-off-by: Wolfgang Denk <wd@denx.de>
16905 commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
16906 Author: Wolfgang Denk <wd@denx.de>
16907 Date: Sun Sep 14 00:59:35 2008 +0200
16909 Prepare v2008.10-rc2
16911 Signed-off-by: Wolfgang Denk <wd@denx.de>
16913 commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
16914 Author: Wolfgang Denk <wd@denx.de>
16915 Date: Sat Sep 13 02:23:05 2008 +0200
16917 Coding style cleanup, update CHANGELOG
16919 Signed-off-by: Wolfgang Denk <wd@denx.de>
16921 commit 0c32565f536609d78feef35c88bbc39d3ac53a73
16922 Author: Peter Tyser <ptyser@xes-inc.com>
16923 Date: Wed Sep 10 09:18:34 2008 -0500
16925 Update mailing list email and archive addresses
16927 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
16929 commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
16930 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
16931 Date: Thu Sep 11 15:40:01 2008 +0200
16933 85xx: socrates: autoprobe Lime chip
16935 This patch is an attempt to implement autoprobing for the Lime
16936 presence on the bus.
16937 Configure GPCM for Lime CS2 and try to access chip ID registers.
16938 Second read atempt delivers register values if the chip is present.
16940 Signed-off-by: Anatolij Gustschin <agust@denx.de>
16942 commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
16943 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
16944 Date: Thu Sep 11 15:40:01 2008 +0200
16946 85xx: socrates: Add support for new image format.
16948 Signed-off-by: Detlev Zundel <dzu@denx.de>
16950 commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
16951 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16952 Date: Thu Sep 11 17:28:18 2008 +0900
16954 sh: Fix compile error for r2dplus
16956 netdev.h was not include by r2dplus.
16958 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
16960 commit 56844a22b76c719e600047e23b80465a44d76abd
16961 Author: Heiko Schocher <hs@denx.de>
16962 Date: Thu Sep 11 08:11:23 2008 +0200
16964 powerpc: Fix bootm to boot up again with a Ramdisk
16966 Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
16967 and this stopped Linux from booting with a Ramdisk. This patch fixes
16968 this, by deleting the useless dummy mem reservation.
16970 When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
16971 added to of_size, so we dont need anymore a dummy mem reservation.
16973 I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
16974 system (=0x44 bytes) and rounded it up to 0x80).
16976 Signed-off-by: Heiko Schocher <hs@denx.de>
16977 Acked-by: Kumar Gala <galak@kernel.crashing.org>
16979 commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
16980 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
16981 Date: Mon Sep 8 02:46:13 2008 +0200
16983 Add support for LZMA uncompression algorithm.
16985 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
16986 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16988 commit 0008b6d968160abe2bfd936493f3a516a7c8da20
16989 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
16990 Date: Fri Jun 27 23:04:20 2008 +0400
16992 fsl_elbc_nand: ecclayout cleanups
16994 This patch deletes oobavail assignments, they're calculated by the nand
16995 core code in nand_scan_tail, plus current oobavail values are wrong for
16998 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
16999 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
17000 Signed-off-by: Scott Wood <scottwood@freescale.com>
17002 commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
17003 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17004 Date: Fri Jun 27 23:04:13 2008 +0400
17006 fsl_elbc_nand: implement support for flash-based BBT
17008 This patch implements support for flash-based BBT for chips working
17009 through ELBC NAND controller, so that NAND core will not have to re-scan
17010 for bad blocks on every boot.
17012 Because ELBC controller may provide HW-generated ECCs we should adjust
17013 bbt pattern and bbt version positions in the OOB free area.
17015 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17016 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
17017 Signed-off-by: Scott Wood <scottwood@freescale.com>
17019 commit 97ae023648e764f794ffb9c52da109d6caf09c47
17020 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17021 Date: Fri Jun 27 23:04:04 2008 +0400
17023 fsl_elbc_nand: fix OOB workability for large page NAND chips
17025 For large page chips, nand_bbt is looking into OOB area, and checking
17026 for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
17027 reserved for bbt means.
17029 But ELBC driver is specifying ecclayout so that oobfree area starts at
17030 offset 1, so only one byte left for the bbt purposes.
17032 This causes problems with any OOB users, namely JFFS2: after first mount
17033 JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
17035 OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
17036 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
17037 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
17038 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
17040 And on the next boot, NAND core will rescan for bad blocks, then will
17041 see "0xff 0x19" pattern, and will mark all blocks as bad ones.
17043 To fix the issue we should implement our own bad block pattern: just one
17044 byte at OOB start. Though, this will work only for x8 chips. For x16
17045 chips two bytes must be checked. Since ELBC driver does not support x16
17046 NANDs (yet), we're safe for now.
17048 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17049 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
17050 Signed-off-by: Scott Wood <scottwood@freescale.com>
17052 commit 7238ada313057a85409485b8ee21515dc10c07a5
17053 Author: Wolfgang Denk <wd@denx.de>
17054 Date: Fri Sep 12 13:52:21 2008 +0200
17056 MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
17058 Signed-off-by: Wolfgang Denk <wd@denx.de>
17060 commit b18410e508a12ba0a177dfc2a386857c806fa96d
17061 Author: Stefan Roese <sr@denx.de>
17062 Date: Thu Sep 11 13:05:56 2008 +0200
17064 ppc4xx: Enable device tree (FDT) support in zeus board port
17066 Signed-off-by: Stefan Roese <sr@denx.de>
17068 commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
17069 Author: Stefan Roese <sr@denx.de>
17070 Date: Wed Sep 10 16:53:47 2008 +0200
17072 ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
17074 This patch fixes a problem introdiced with patch
17075 bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
17078 The boards affected are:
17085 Signed-off-by: Stefan Roese <sr@denx.de>
17087 commit 61737c59a3285f6fadf96a5836879898c04ec28d
17088 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17089 Date: Thu Sep 11 19:41:26 2008 -0400
17091 ppc4xx: Add .gitignore file to xilinx-ppc440 boards
17093 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17094 Signed-off-by: Stefan Roese <sr@denx.de>
17096 commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
17097 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17098 Date: Thu Sep 11 19:41:25 2008 -0400
17100 ppc4xx: Fix compilation of v5fx30teval_flash
17102 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17103 Signed-off-by: Stefan Roese <sr@denx.de>
17105 commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
17106 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17107 Date: Wed Sep 10 17:44:30 2008 -0400
17109 ppc4xx: Fix in-tree build for ppc440-generic boards
17111 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17112 Signed-off-by: Stefan Roese <sr@denx.de>
17114 commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
17115 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17116 Date: Fri Sep 12 02:20:47 2008 +0200
17118 ARM: synchronize mach-types.h with linux 2.6.27-rc6
17120 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17122 commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
17123 Author: Jens Scharsig <esw@bus-elektronik.de>
17124 Date: Fri Sep 12 02:20:47 2008 +0200
17126 at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
17128 This patch prevents linker error on AT91RM9200 boards, if
17129 CONFIG_CMD_I2_TREE is set.
17130 It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
17132 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
17134 commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
17135 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
17136 Date: Fri Sep 12 02:20:47 2008 +0200
17138 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
17140 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
17142 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
17144 commit 03db53335c8eba656a7c44d1555b1a4514383e33
17145 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
17146 Date: Fri Sep 12 02:20:46 2008 +0200
17148 make: Remove redundant __ARM__ addition when cross-compiling on *BSD
17150 __ARM__ is given by arm_config.mk automatically.
17152 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
17154 commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
17155 Author: Claudio Scordino <claudio@evidence.eu.com>
17156 Date: Fri Sep 12 02:20:46 2008 +0200
17158 Fix MACH_TYPE for the AT91RM9200DK board.
17160 Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
17162 commit 274737e5eb25b2bcd3af3a96da923effd543284f
17163 Author: Andrew Dyer <adyer@righthandtech.com>
17164 Date: Fri Sep 12 02:20:46 2008 +0200
17166 i.mx change get_timer(base) to return time since base
17168 This patch changes get_timer() for i.MX to return the time since
17169 'base' instead of the time since the counter was at zero.
17171 Symptom seen is flash timeout errors when erasing or programming a
17172 sector using the common cfi flash code.
17174 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
17176 commit 48fed40575b3e8eae960eb0141509ddd9a73012a
17177 Author: Andrew Dyer <adyer@righthandtech.com>
17178 Date: Fri Sep 12 02:20:46 2008 +0200
17180 i.MX use u-boot baud rate and don't assume UART master clock
17182 1) Change the i.MX serial driver to use the baud rate set in the
17185 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
17187 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
17188 one to clear" like other status bits in the reg.)
17190 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
17192 commit 6e1551a870d360805b9d172dc56d935064abe71d
17193 Author: Andrew Dyer <adyer@righthandtech.com>
17194 Date: Fri Sep 12 02:20:46 2008 +0200
17196 arm920t fix constant error in start.S
17198 Code in cpu/arm920t/start.S will die with a compilation error if
17199 CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
17200 the ARM sub instruction. Change the code so that each is subtracted
17201 independently to avoid the error.
17203 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
17205 commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
17206 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
17207 Date: Fri Sep 12 02:20:40 2008 +0200
17209 ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
17211 - Correct Invalid #define of MPUTIM_PTV_MASK for
17212 omap1510 & omap730 register definition
17214 MPUTIM_PTV_MASK is defined as
17215 #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
17217 while it should have been
17218 #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
17220 - Below Patch corrects the same
17222 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
17224 commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
17225 Author: Adrian Filipi <adrian.filipi@eurotech.com>
17226 Date: Fri Jul 18 11:52:02 2008 -0400
17228 Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
17230 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
17232 commit eb16135df20535b0d19969f50fb5bd17f95e9c25
17233 Author: Guennadi Liakhovetski <lg@denx.de>
17234 Date: Thu Aug 28 12:25:11 2008 +0200
17236 i.MX31: document timer precision option
17238 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
17240 commit 1a6337b01351b82a45b0defa76f08744511c580b
17241 Author: Magnus Lilja <lilja.magnus@gmail.com>
17242 Date: Fri Aug 29 10:36:18 2008 +0200
17244 i.MX31: Make the SPI bus and chip select configurable for MC13783
17246 The i.MX31 has three SPI buses and each bus has several chip selects
17247 and the MC13783 chip can be connected to any of these. The current
17248 RTC driver for MC13783 is hardcoded for CSPI2/SS2.
17250 This patch makes make MC13783 SPI bus and chip select configurable
17251 via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
17253 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
17255 commit 8c4ebec25b21e355b8488698ec1594da9701fff4
17256 Author: Magnus Lilja <lilja.magnus@gmail.com>
17257 Date: Fri Aug 29 10:36:17 2008 +0200
17259 i.MX31: Add reset_timer() and modify get_timer_masked().
17261 This patch adds the reset_timer() function (needed by nand_base.c) and
17262 modifies the get_timer_masked() to work in the same way as the omap24xx
17265 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
17267 commit deeec4991a55de243787002ede24d2331d234fc8
17268 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17269 Date: Wed Sep 10 22:48:09 2008 +0200
17271 ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
17273 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17275 commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
17276 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17277 Date: Wed Sep 10 22:48:09 2008 +0200
17279 bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
17281 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17283 commit 0e8d158664a913392cb01fb11a948d83f72e105e
17284 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17285 Date: Wed Sep 10 22:48:06 2008 +0200
17287 rename CFG_ENV macros to CONFIG_ENV
17289 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17291 commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
17292 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17293 Date: Wed Sep 10 22:48:05 2008 +0200
17295 nvedit: rename error comment to CONFIG_ENV_IS_IN_
17297 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17299 commit b64b775e7546ed138df360ceb3a71ee358cb9a01
17300 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17301 Date: Wed Sep 10 22:48:05 2008 +0200
17303 cmd_mem: Move conditional compilation to Makefile
17305 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17307 commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
17308 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17309 Date: Wed Sep 10 22:48:05 2008 +0200
17311 move cmd_get_data_size to command.c
17313 add CMD_DATA_SIZE macro to enable it
17315 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17317 commit 507641d2491980531932b9f25dab37fe5e6c3a1a
17318 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17319 Date: Wed Sep 10 22:48:04 2008 +0200
17321 env_flash: Move conditional compilation to Makefile
17323 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17325 commit 5a1aceb0689e2f731491838970884a673ef7e7d3
17326 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17327 Date: Wed Sep 10 22:48:04 2008 +0200
17329 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
17331 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17333 commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
17334 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17335 Date: Wed Sep 10 22:48:03 2008 +0200
17337 cleanup use of CFG_ENV_IS_IN_FLASH
17339 - #if CFG_ENV_IS_IN_FLASH
17340 - #if (CFG_ENV_IS_IN_FLASH == 1)
17341 - #define CFG_ENV_IS_IN_FLASH 0
17343 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17345 commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
17346 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17347 Date: Wed Sep 10 22:48:01 2008 +0200
17349 rename environment.c in env_embedded.c to reflect is functionality
17351 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17353 commit c0878af6e32f0fd8e13a6ca315b9add64441115a
17354 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17355 Date: Wed Sep 10 22:48:01 2008 +0200
17357 env_nowhere: Move conditional compilation to Makefile
17359 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17361 commit 93f6d72544da4510a146bc4c93d609b0116cde37
17362 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17363 Date: Wed Sep 10 22:48:00 2008 +0200
17365 rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
17367 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17369 commit 2556ef78113b5f089dfcac5da90bf31dd568397b
17370 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17371 Date: Wed Sep 10 22:48:00 2008 +0200
17373 env_sf: Move conditional compilation to Makefile
17375 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17377 commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
17378 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17379 Date: Wed Sep 10 22:48:00 2008 +0200
17381 rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
17383 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17385 commit 55c5f49910ec8225347aa1d211352a84de6649b4
17386 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17387 Date: Wed Sep 10 22:48:00 2008 +0200
17389 env_onenand: Move conditional compilation to Makefile
17391 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17393 commit 9656138ff1a34d4c4768db6b490deffc40ee674b
17394 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17395 Date: Wed Sep 10 22:47:59 2008 +0200
17397 rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
17399 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17401 commit 957a0e69575683efd70ace147746bbb3d8e7c501
17402 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17403 Date: Wed Sep 10 22:47:59 2008 +0200
17405 env_nvram: Move conditional compilation to Makefile
17407 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17409 commit 9314cee6917444ab88bd4e758da7a30975120187
17410 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17411 Date: Wed Sep 10 22:47:59 2008 +0200
17413 rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
17415 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17417 commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
17418 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17419 Date: Wed Sep 10 22:47:59 2008 +0200
17421 env_nand: Move conditional compilation to Makefile
17423 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17425 commit 51bfee192099206a4397f15f3b93516e01f58ab0
17426 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17427 Date: Wed Sep 10 22:47:58 2008 +0200
17429 rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
17431 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17433 commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
17434 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17435 Date: Wed Sep 10 22:47:58 2008 +0200
17437 env_dataflash: Move conditional compilation to Makefile
17439 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17441 commit 057c849c45b9ee19df8ff3acdeee66be52819962
17442 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17443 Date: Wed Sep 10 22:47:58 2008 +0200
17445 rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
17447 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17449 commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
17450 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17451 Date: Wed Sep 10 22:47:52 2008 +0200
17453 cmd_eeprom: Move conditional compilation to Makefile
17455 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17457 commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
17458 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17459 Date: Fri Sep 5 09:19:54 2008 +0200
17461 env_eeprom: Move conditional compilation to Makefile
17463 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17465 commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
17466 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17467 Date: Fri Sep 5 09:19:30 2008 +0200
17469 rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
17471 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17473 commit 32628c5008105a732212003d83b75f05e5243bb2
17474 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17475 Date: Sat Aug 30 23:54:58 2008 +0200
17477 cmd_mac: Move conditional compilation to Makefile
17479 finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
17480 start in commit ad8f8687b78c3e917b173f038926695383c55555
17482 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17484 commit e5648acab153f0f429bfc714902c5aaa7879f71b
17485 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17486 Date: Sat Aug 30 23:47:41 2008 +0200
17488 cmd_fdc: Move conditional compilation to Makefile
17490 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17492 commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
17493 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17494 Date: Sat Aug 30 23:47:38 2008 +0200
17496 common/Makefile: add core command section
17498 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17500 commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
17501 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17502 Date: Sat Aug 30 23:29:57 2008 +0200
17504 cmd_vfd: Move conditional compilation to Makefile
17506 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17508 commit 6644641d072aee3087da129d8443187196a4d8a9
17509 Author: Scott Wood <scottwood@freescale.com>
17510 Date: Wed Sep 10 11:48:49 2008 -0500
17512 delta, zylonite: Update nand_oobinfo to nand_ecclayout.
17514 This is part of the switch to newer upstream MTD code.
17516 Signed-off-by: Scott Wood <scottwood@freescale.com>
17518 commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
17519 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
17520 Date: Sat Aug 30 17:06:55 2008 -0400
17522 ARM DaVinci: Fix broken HW ECC for large page NAND.
17524 Based on original patch by Bernard Blackham <bernard@largestprime.net>
17526 U-boot's HW ECC support for large page NAND on Davinci is completely
17527 broken. Some kernels, such as the 2.6.10 one supported by
17528 MontaVista for DaVinci, rely upon this broken behaviour as they
17529 share the same code for ECCs. In the existing scheme, error
17530 detection *might* work on large page, but error correction
17531 definitely does not. Small page ECC correction works, but the
17532 format is not compatible with the mainline git kernel.
17534 This patch adds ECC code that matches what is currently in the
17535 Davinci git repository (since NAND support was added in 2.6.24).
17536 This makes the ECC and OOB layout written by u-boot compatible with
17537 Linux for both small page and large page devices and fixes ECC
17538 correction for large page devices.
17540 The old behaviour can be restored by defining the macro
17541 CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
17543 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
17544 Acked-by: Sergey Kubushyn <ksi@koi8.net>
17545 Signed-off-by: Scott Wood <scottwood@freescale.com>
17547 commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
17548 Author: Heiko Schocher <hs@denx.de>
17549 Date: Wed Sep 10 11:15:28 2008 +0200
17551 muas3001: update BR4 settings
17553 Also set up the port pins for using I2C.
17555 Signed-off-by: Heiko Schocher <hs@denx.de>
17557 commit 3591293509e0c0bcf244b0f974775bff2e25697e
17558 Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
17559 Date: Wed Sep 10 09:43:49 2008 +0300
17561 autoscr: Fix one-character lines and non-newline terminated scripts
17563 When not using hush, the autoscr command now executes lines that are
17564 only one character long. It also runs the last line of scripts even if
17565 it does not end in a newline.
17567 Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
17569 commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
17570 Author: Victor Gallardo <vgallardo@amcc.com>
17571 Date: Tue Sep 9 15:13:29 2008 -0700
17573 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
17575 On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
17578 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
17580 commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
17581 Author: Heiko Schocher <hs@denx.de>
17582 Date: Mon Sep 8 10:21:11 2008 +0200
17584 muas3001: added support for the LM75 sensor.
17586 Signed-off-by: Heiko Schocher <hs@denx.de>
17588 commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
17589 Author: Heiko Schocher <hs@denx.de>
17590 Date: Mon Sep 8 10:20:19 2008 +0200
17592 muas3001: activate WDT for the muas3001 board.
17594 Signed-off-by: Heiko Schocher <hs@denx.de>
17596 commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
17597 Author: Heiko Schocher <hs@denx.de>
17598 Date: Mon Sep 8 10:19:36 2008 +0200
17600 muas3001: added 64MB SDRAM autodetection.
17602 Signed-off-by: Heiko Schocher <hs@denx.de>
17604 commit 5251469943895de4bb9a04d5053352cc22acb7d5
17605 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
17606 Date: Thu Aug 21 07:12:26 2008 -0700
17608 Fix printf errors under -DDEBUG
17610 Fix printf format-string/arg mismatches under -DDEBUG.
17612 These warnings occur with DEBUG defined for a platform using
17613 cpu/mpc85xx. Users of other architectures can unearth similar
17614 problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
17615 after "CFLAGS += $(call cc-option,-fno-stack-protector)".
17617 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
17618 Signed-off-by: Andy Fleming <afleming@freescale.com>
17620 commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
17621 Author: Wolfgang Denk <wd@denx.de>
17622 Date: Tue Sep 9 23:55:18 2008 +0200
17624 Update CHANGELOG, prepare 2008-10-rc1 release
17626 Signed-off-by: Wolfgang Denk <wd@denx.de>
17628 commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
17629 Author: Kumar Gala <galak@kernel.crashing.org>
17630 Date: Mon Sep 8 08:51:29 2008 -0500
17632 85xx: Ensure timebase is zero on secondary cores
17634 The e500um says the timebase is volatile out of reset. To ensure
17635 TB sync works we need to make sure its zero.
17637 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17639 commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
17640 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17641 Date: Tue Sep 9 22:18:24 2008 +0200
17643 bootm_load_os: fix load_end debug message
17645 print load_end value not pointer
17647 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17649 commit 1d9af0be764960e6cc1c093e97176c3542796820
17650 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17651 Date: Tue Sep 9 22:18:23 2008 +0200
17653 bootm: enable fdt support only on ppc, m68k and sparc
17655 ...as done in image.c
17657 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17659 commit 748b5274e76f81df85cfcffaffedc323678d0623
17660 Author: Markus Heidelberg <markus.heidelberg@web.de>
17661 Date: Tue Sep 9 18:51:05 2008 +0200
17663 common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
17665 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
17667 commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
17668 Author: Markus Heidelberg <markus.heidelberg@web.de>
17669 Date: Tue Sep 9 17:31:46 2008 +0200
17671 gitignore: add tags files and Vim swap file
17673 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
17675 commit 1d9b67b23fca6a25154333733204339802510720
17676 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
17677 Date: Tue Sep 9 17:52:47 2008 +0900
17679 add board_eth_init() for sh7785lcr board
17681 Fix the problem that cannot work RTL8169 on sh7785lcr board.
17683 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
17685 commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
17686 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17687 Date: Wed Aug 6 16:08:41 2008 -0500
17689 mtd: SPI Flash: Support the STMicro Flash
17691 Add MTD SPI Flash support for M25P16, M25P20, M25P32,
17692 M25P40, M25P64, M25P80, M25P128.
17694 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
17695 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
17697 commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
17698 Author: Wolfgang Denk <wd@denx.de>
17699 Date: Tue Sep 9 17:55:31 2008 +0200
17701 trab: fix build problem after change to use do_div()
17703 We must link with libgeneric now.
17705 Signed-off-by: Wolfgang Denk <wd@denx.de>
17707 commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
17708 Author: Ryan CHEN <ryan.chen@st.com>
17709 Date: Wed Aug 20 13:00:17 2008 -0400
17711 Correct drv_usb_kbd_init function
17713 The patch is that check if usb_get_dev_index() function return valid
17714 pointer. If valid, continue. Otherwise return -1.
17716 Signed-off-by: Ryan Chen <ryan.chen@st.com>
17717 Acked-by: Markus Klotzbuecher <mk@denx.de>
17719 commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
17720 Author: Remy Bohmer <linux@bohmer.net>
17721 Date: Wed Aug 20 11:22:02 2008 +0200
17723 Make usb-stop() safe to call multiple times in a row.
17725 A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
17726 enabled the usb_stop() command in common/cmd_bootm.c which was
17727 not enabled for some time, because no board did actually set the
17728 CFG_CMD_USB flag. So, now the usb_stop() is executed before
17729 loading the linux kernel.
17731 However, the usb_ohci driver hangs up (at least on AT91SAM) if the
17732 driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
17733 If some other piece of code calls usb_stop() before the bootm command,
17734 this command will hangup the system during boot.
17735 (usb start and stop is typically used while booting from usb memory stick)
17737 But, stopping the usb stack twice is useless anyway, and a flag already
17738 existed that kept track on the usb_init()/usb_stop() calls.
17739 So, we now check if the usb stack is really started before we stop it.
17741 This problem is now fixed in both the upper as low-level layer.
17743 Signed-off-by: Remy Bohmer <linux@bohmer.net>
17744 Acked-by: Markus Klotzbuecher <mk@denx.de>
17746 commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
17747 Author: Wolfgang Denk <wd@denx.de>
17748 Date: Tue Sep 9 16:55:47 2008 +0200
17750 Makefile: fix bug introduced by commit 47ffd6c2
17752 commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
17753 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17754 Date: Tue Sep 9 10:00:33 2008 -0400
17756 ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
17758 This patch solves the problems compiling ml507, v5fx30teval and
17759 ppc440-generic out of tree.
17761 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17763 commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
17764 Author: NÃcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
17765 Date: Thu Sep 4 15:35:46 2008 -0300
17767 Fix dev_print when called from usb_stor_info (usb storage command)
17769 Fix output of the usb storage command. It was printing "Device 0: not
17770 available" because IF_TYPE_USB was not included into the switch
17773 Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
17775 commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
17776 Author: Bartlomiej Sieka <tur@semihalf.com>
17777 Date: Tue Sep 9 12:58:16 2008 +0200
17779 FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
17781 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
17783 commit 919f550dc11a13abf01c6bc713c968de790b8d7c
17784 Author: Bartlomiej Sieka <tur@semihalf.com>
17785 Date: Tue Sep 9 12:58:15 2008 +0200
17787 FIT: add ability to check hashes of all images in FIT, improve output
17789 - add function fit_all_image_check_hashes() that verifies if all
17790 hashes of all images in the FIT are valid
17791 - improve output of fit_image_check_hashes() when the hash check fails
17793 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
17795 commit 1de1fa408967cef6804bb046b904114519bb36f0
17796 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17797 Date: Mon Sep 8 20:54:39 2008 +0200
17799 qemu_mips: Update linux bootm to support dynamic cmdline
17801 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17803 commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
17804 Author: Peter Tyser <ptyser@xes-inc.com>
17805 Date: Mon Sep 8 14:56:49 2008 -0500
17807 Add support for booting of INTEGRITY operating system uImages
17809 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
17811 commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
17812 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17813 Date: Mon Sep 8 21:01:29 2008 +0200
17815 mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
17817 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
17819 commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
17820 Author: Kumar Gala <galak@kernel.crashing.org>
17821 Date: Mon Sep 8 13:57:12 2008 -0500
17823 Remove support for booting ARTOS images
17825 Pantelis Antoniou stated:
17826 AFAIK, it is still used but the products using PPC are long gone.
17827 Nuke it plz (from orbit).
17829 So remove it since it cleans up a usage of env_get_char outside of
17830 the environment code.
17832 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17834 commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
17835 Author: Wolfgang Denk <wd@denx.de>
17836 Date: Tue Sep 9 15:45:18 2008 +0200
17838 Makefile: compile and link each module just once
17840 Several source files need to be compiled and linked when one or more
17841 config options are selected. To allow for easy selection in the
17842 Makefiles yet to avoild multiple compilation (which costs build time)
17843 and especially multiple linking (which causes errors), we use
17844 "COBJS = $(sort COBJS-y)" which eliminates duplicates.
17846 By courtesy of Detlev Zundel who suggested this approach.
17848 Signed-off-by: Wolfgang Denk <wd@denx.de>
17850 commit 48d0192fe869948fef14b460b5f0c85bca933693
17851 Author: Andreas Engel <andreas.engel@ericsson.com>
17852 Date: Mon Sep 8 14:30:53 2008 +0200
17854 Moved conditional compile into Makefile
17856 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
17858 commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
17859 Author: Andreas Engel <andreas.engel@ericsson.com>
17860 Date: Mon Sep 8 10:17:31 2008 +0200
17862 Merged serial_pl010.c and serial_pl011.c.
17864 They only differ in the init function.
17865 This also adds the missing watchdog support for the PL011.
17867 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
17869 commit 0817d688f307ee2c0598e79175c94a40ce90337b
17870 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17871 Date: Sun Sep 7 17:10:27 2008 -0400
17873 Remove gap fill in srec object v2
17875 SREC files do not need gap fill: The load address is specified in the
17876 file. On the other hand, it can't be avoided in a .bin object. It has
17877 no information about memory location.
17879 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
17881 commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
17882 Author: Markus Heidelberg <markus.heidelberg@web.de>
17883 Date: Sun Sep 7 20:18:27 2008 +0200
17885 README: fix missing subdirectory in the documentation
17887 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
17889 commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
17890 Author: Graeme Russ <graeme.russ@gmail.com>
17891 Date: Sun Sep 7 07:08:42 2008 +1000
17893 Update i386 code (sc520_cdp)
17895 Attempt to bring i386 / sc520 inline with master
17897 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
17899 commit 5608692104efa8d56df803dc79ea41ac3607eee5
17900 Author: Guennadi Liakhovetski <lg@denx.de>
17901 Date: Thu Sep 4 13:01:49 2008 +0200
17903 fw_env: add NAND support
17905 Add support for environment in NAND with automatic NOR / NAND recognition,
17906 including unaligned environment, bad-block skipping, redundant environment
17909 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
17911 commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
17912 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17913 Date: Tue Sep 9 09:50:24 2008 +0200
17915 ppc4xx: Fix out-of-tree building of CPCI405 variants
17917 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17918 Acked-by: Stefan Roese <sr@denx.de>
17920 commit 59f630588e3fdbd698a0a2798e52a8924e899563
17921 Author: Sergei Poselenov <sposelenov@emcraft.com>
17922 Date: Fri Aug 15 15:42:11 2008 +0200
17924 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
17926 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17928 commit e64987a892353f3d49eb242d997820ef8f538912
17929 Author: Anatolij Gustschin <agust@denx.de>
17930 Date: Fri Aug 15 15:42:13 2008 +0200
17932 85xx: socrates: Enable Lime support.
17934 This patch adds Lime GDC support together with support for the PWM
17935 backlight control through the w83782d chip. The reset pin of the
17936 latter is attached to GPIO, so we need to reset it in
17937 early_board_init_r.
17939 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17941 commit 3e79b588b5199f35016f178fc0d5d1266382097f
17942 Author: Detlev Zundel <dzu@denx.de>
17943 Date: Fri Aug 15 15:42:12 2008 +0200
17945 85xx: Socrates: Major code update.
17947 - Update the local bus ranges in the FDT for Linux for the various
17948 devices connected to the local bus via chip-select.
17950 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
17951 lower than 66 MHz and uses I/O accessor functions consequently.
17955 - Update of default environment and configuration. Use I2C multibus
17956 as we do have two I2C buses. Also enable sdram and ext2 commands.
17958 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
17959 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
17960 Signed-off-by: Detlev Zundel <dzu@denx.de>
17962 commit e8d18541c6ceab821f75faab031740b33fdbfa4b
17963 Author: Timur Tabi <timur@freescale.com>
17964 Date: Fri Jul 18 16:52:23 2008 +0200
17966 Update Freescale 85xx boards to sys_eeprom.c
17968 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
17969 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
17970 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
17971 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
17973 Signed-off-by: Timur Tabi <timur@freescale.com>
17975 commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
17976 Author: Wolfgang Denk <wd@denx.de>
17977 Date: Tue Sep 9 10:08:02 2008 +0200
17979 lib_ppc/interrupts.c: make board_show_activity() a weak function
17981 This allows to use show_activity() without having to
17982 define an empty board_show_activity() function.
17984 Signed-off-by: Wolfgang Denk <wd@denx.de>
17986 commit fe876787f8743883ce58fed61525eaa2f34da4c5
17987 Author: Wolfgang Denk <wd@denx.de>
17988 Date: Tue Sep 9 10:06:44 2008 +0200
17990 stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
17992 Signed-off-by: Wolfgang Denk <wd@denx.de>
17994 commit 965de106ba8900372c8b16dc60d5acab7f925e38
17995 Author: Wolfgang Denk <wd@denx.de>
17996 Date: Tue Sep 9 10:03:47 2008 +0200
17998 NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
18000 Signed-off-by: Wolfgang Denk <wd@denx.de>
18002 commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
18003 Author: Sergei Poselenov <sposelenov@emcraft.com>
18004 Date: Fri Aug 15 15:42:11 2008 +0200
18006 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
18008 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18010 commit 36241ca29d4804a1006fb3f26069effda5202581
18011 Author: Anatolij Gustschin <agust@denx.de>
18012 Date: Fri Aug 15 15:42:13 2008 +0200
18014 85xx: socrates: Enable Lime support.
18016 This patch adds Lime GDC support together with support for the PWM
18017 backlight control through the w83782d chip. The reset pin of the
18018 latter is attached to GPIO, so we need to reset it in
18019 early_board_init_r.
18021 Signed-off-by: Anatolij Gustschin <agust@denx.de>
18023 commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
18024 Author: Detlev Zundel <dzu@denx.de>
18025 Date: Fri Aug 15 15:42:12 2008 +0200
18027 85xx: Socrates: Major code update.
18029 - Update the local bus ranges in the FDT for Linux for the various
18030 devices connected to the local bus via chip-select.
18032 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
18033 lower than 66 MHz and uses I/O accessor functions consequently.
18037 - Update of default environment and configuration. Use I2C multibus
18038 as we do have two I2C buses. Also enable sdram and ext2 commands.
18040 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
18041 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18042 Signed-off-by: Detlev Zundel <dzu@denx.de>
18044 commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
18045 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18046 Date: Tue Sep 9 01:22:39 2008 +0200
18048 disk-on-chip: remove duplicate doc_probe declaration
18050 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18052 commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
18053 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18054 Date: Tue Sep 9 00:59:40 2008 +0200
18056 onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
18058 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18060 commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
18061 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18062 Date: Tue Sep 9 00:59:39 2008 +0200
18064 rs5c372: fix rtc_set prototype
18066 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18068 commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
18069 Author: Sergei Poselenov <sposelenov@emcraft.com>
18070 Date: Thu Aug 14 14:08:28 2008 +0200
18072 ARM: fix warning: target CPU does not support interworking
18074 This patch fixes warnings like this:
18076 start.S:0: warning: target CPU does not support interworking
18078 which come from some ARM cross compilers and are caused by hard-coded
18079 (with "--with-cpu=arm9" configuration option) ARM targets (which
18080 support ARM Thumb instructions), while the ARM target selected from
18081 the command line (with "-march=armv4") doesn't support Thumb
18084 This warning is issued by the compiler regardless of the real use of
18085 the Thumb instructions in code.
18087 To fix this problem, we use options according to compiler version
18090 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18091 Signed-off-by: Wolfgang Denk <wd@denx.de>
18093 commit 4265c35fbcb248e58179007621d61d32d0b3b82a
18094 Author: Sergei Poselenov <sposelenov@emcraft.com>
18095 Date: Thu Aug 14 14:08:28 2008 +0200
18097 ARM: Use do_div() instead of division for "long long".
18099 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
18100 Signed-off-by: Wolfgang Denk <wd@denx.de>
18102 commit 8febd13c69cb68652577d1a9fcbde954bf784155
18103 Author: Timur Tabi <timur@freescale.com>
18104 Date: Fri Jul 18 16:52:23 2008 +0200
18106 Update Freescale 85xx boards to sys_eeprom.c
18108 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
18109 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
18110 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
18111 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
18113 Signed-off-by: Timur Tabi <timur@freescale.com>
18115 commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
18116 Author: Wolfgang Denk <wd@denx.de>
18117 Date: Mon Sep 8 23:26:22 2008 +0200
18119 lib_arm/bootm.c: fix compile warnings
18121 bootm.c:128: warning: label 'error' defined but not used
18122 bootm.c:65: warning: unused variable 'ret'
18124 Signed-off-by: Wolfgang Denk <wd@denx.de>
18126 commit 2e3c867d0a63c563a51e65b776973b008f16cec5
18127 Author: Wolfgang Denk <wd@denx.de>
18128 Date: Mon Sep 8 22:46:42 2008 +0200
18130 ml507: fix out of tree build problem
18132 Signed-off-by: Wolfgang Denk <wd@denx.de>
18134 commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
18135 Author: Wolfgang Denk <wd@denx.de>
18136 Date: Mon Sep 8 22:10:28 2008 +0200
18138 common/cmd_bootm.c: fix printf() format warnings
18140 Signed-off-by: Wolfgang Denk <wd@denx.de>
18142 commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
18143 Author: Wolfgang Denk <wd@denx.de>
18144 Date: Mon Sep 8 22:37:45 2008 +0200
18146 BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
18148 missing doc_probe() prototype.
18150 Signed-off-by: Wolfgang Denk <wd@denx.de>
18152 commit 2c5e3cc4994897d364b148942ff23e47783198f6
18153 Author: Wolfgang Denk <wd@denx.de>
18154 Date: Mon Sep 8 21:28:14 2008 +0200
18156 mk48t59: fix compile problem introduced by commit d1e23194
18158 Signed-off-by: Wolfgang Denk <wd@denx.de>
18160 commit 5ff889349d2ace13f10c9335e09365fcec8247cc
18161 Author: Stefan Roese <sr@denx.de>
18162 Date: Mon Sep 8 14:11:12 2008 +0200
18164 ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
18166 This patch moves some 4xx specific prototypes out of include common.h
18167 to a ppc4xx specific header.
18169 Signed-off-by: Stefan Roese <sr@denx.de>
18171 commit ac53ee8318678190bf3c68da477a84a657d86fb0
18172 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18173 Date: Fri Sep 5 15:34:04 2008 +0200
18175 ppc4xx: Update CPCI405(AB) configuration
18177 This patch add FDT support and command line editing capabilities
18178 for CPCI405 and CPCI405AB boards.
18180 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18181 Signed-off-by: Stefan Roese <sr@denx.de>
18183 commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
18184 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18185 Date: Fri Sep 5 15:34:03 2008 +0200
18187 ppc4xx: Cleanup CPCI405 linker script
18189 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18190 Signed-off-by: Stefan Roese <sr@denx.de>
18192 commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
18193 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18194 Date: Fri Sep 5 15:34:02 2008 +0200
18196 ppc4xx: Update CPCI405 variants handling
18198 This patch replaces the BOARD_REVISION variable in include/config.mk
18199 by a using a temporary include file in the platform directory.
18201 The former way does not work anymore and the latter is also used by
18204 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18205 Signed-off-by: Stefan Roese <sr@denx.de>
18207 commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
18208 Author: Stefan Roese <sr@denx.de>
18209 Date: Mon Sep 8 10:01:48 2008 +0200
18211 ppc4xx: Remove CONFIG_CS8952_PHY define
18213 Since this define is only used on one board that was never really in
18214 production, removing this compile time option doesn't hurt and makes
18215 the code more readable.
18217 Signed-off-by: Stefan Roese <sr@denx.de>
18219 commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
18220 Author: Stefan Roese <sr@denx.de>
18221 Date: Fri Sep 5 14:11:40 2008 +0200
18223 ppc4xx: Fix compilation warning for PIP405
18225 This patch fixes a compilation warning for the PIP405 board. It moves the
18226 #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
18227 occur anymore. I am a little unsure if this #ifdef is at the correct
18228 place now or if it could be removed completely. This needs to get
18229 tested on the PIP405 board.
18231 Signed-off-by: Stefan Roese <sr@denx.de>
18233 commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
18234 Author: Stefan Roese <sr@denx.de>
18235 Date: Fri Sep 5 14:09:09 2008 +0200
18237 ppc4xx: Fix compilation warning for canyonlands & glacier
18239 Signed-off-by: Stefan Roese <sr@denx.de>
18241 commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
18242 Author: Kumar Gala <galak@kernel.crashing.org>
18243 Date: Fri Sep 5 14:40:29 2008 -0500
18245 Fix compiler warning in mpc8xxx ddr code
18247 ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
18248 ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
18249 ctrl_regs.c:523: note: 'caslat' was declared here
18251 Add a warning in DDR1 case if cas_latency isn't a value we know about.
18253 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18254 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18256 commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
18257 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18258 Date: Mon Sep 1 23:06:23 2008 +0200
18260 rtc: allow rtc_set to return an error and use it in cmd_date
18262 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18264 commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
18265 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18266 Date: Mon Sep 1 01:16:33 2008 +0200
18268 ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
18270 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18272 commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
18273 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18274 Date: Sun Aug 31 05:37:04 2008 +0900
18276 config.mk: Move arch-specific condition to $(ARCH)_config.mk
18278 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18280 commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
18281 Author: Kumar Gala <galak@kernel.crashing.org>
18282 Date: Fri Aug 29 19:08:29 2008 -0500
18284 Prevent crash if random/invalid ramdisks are passed to bootm
18286 Adds returning an error from the ramdisk detection code if
18287 its not a real ramdisk (invalid). There is no reason we can't
18288 just return back to the console if we detect an invalid
18289 ramdisk or CRC error.
18291 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18293 commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
18294 Author: Anatolij Gustschin <agust@denx.de>
18295 Date: Fri Aug 29 21:04:45 2008 +0200
18297 Prevent crash if random DTB address is passed to bootm
18299 This patch adds bootm_start() return value check. If
18300 error status is returned, we do not proceed further to
18301 prevent board reset or crash as we still can recover
18304 Signed-off-by: Anatolij Gustschin <agust@denx.de>
18306 commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
18307 Author: Andrew Dyer <adyer@righthandtech.com>
18308 Date: Fri Aug 29 12:30:39 2008 -0500
18310 clean up some #if !defined() in drivers/video/cfb_console.c
18312 rearrange some #if !defined() / #else / #endif statements to remove
18313 the negative logic.
18315 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
18317 commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
18318 Author: Kyungmin Park <kmpark@infradead.org>
18319 Date: Fri Aug 29 09:02:20 2008 +0900
18321 apollon: use the last memory area for u-boot
18323 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
18325 commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
18326 Author: Heiko Schocher <hs@denx.de>
18327 Date: Thu Aug 28 13:50:42 2008 +0200
18329 TQM8272: move NAND part in seperate File
18331 I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
18332 because I have no longer access to the hardware.
18334 Signed-off-by: Heiko Schocher <hs@denx.de>
18336 commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
18337 Author: Heiko Schocher <hs@denx.de>
18338 Date: Thu Aug 28 13:48:36 2008 +0200
18340 TQM8272: Fix compiling error for the TQM8272 board.
18342 Fix compile problems caused by
18343 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
18345 Signed-off-by: Heiko Schocher <hs@denx.de>
18347 commit 1a7f8ccec981648ccd38fca2535490582eee08e6
18348 Author: Kyungmin Park <kmpark@infradead.org>
18349 Date: Wed Aug 27 14:45:20 2008 +0900
18351 Add JFFS2 command support on OneNAND
18353 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
18355 commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
18356 Author: Mark Jackson <mpfj@mimc.co.uk>
18357 Date: Mon Aug 25 19:21:30 2008 +0100
18359 Allow console input to be disabled
18361 Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
18363 When CONFIG_DISABLE_CONSOLE is defined, setting
18364 GD_FLG_DISABLE_CONSOLE disables all console input and output.
18366 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
18368 commit 2b22d608f370565c87f55928b524207031419c11
18369 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18370 Date: Wed Jul 30 12:39:29 2008 +0200
18372 loads: allow negative offsets
18374 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18376 commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
18377 Author: Yuri Tikhonov <yur@emcraft.com>
18378 Date: Thu Sep 4 11:19:05 2008 +0200
18380 USB EHCI: reset root hub
18382 Some of multi-function USB controllers (e.g. ISP1562) allow root hub
18383 resetting only via EHCI registers. So, this patch adds the
18384 corresponding kind of reset to OHCI's hc_reset() if the newly
18385 introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
18388 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18389 Acked-by: Markus Klotzbuecher <mk@denx.de>
18391 commit 5875d358f025c1b042d8a0f08384b756de7256c9
18392 Author: Yuri Tikhonov <yur@emcraft.com>
18393 Date: Fri Aug 15 15:42:09 2008 +0200
18395 RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
18397 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18399 commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
18400 Author: Stefan Roese <sr@denx.de>
18401 Date: Fri Sep 5 10:47:46 2008 +0200
18403 devices: Use list_add_tail() instead of list_add() to register a device
18405 This patch fixes a problem spotted on Glacier/Canyonlands (and most
18406 likely lots of other board ports), that no serial output was seen
18407 after console initialization in console_init_r(). This is because the
18408 last added console device was used instead of the first added.
18410 This patch fixes this problem by using list_add_tail() instead of
18411 list_add() to register a device. This way the first added console
18414 Signed-off-by: Stefan Roese <sr@denx.de>
18416 commit 78d78236896d62bb8ca7302af38d8f1493eb2651
18417 Author: Victor Gallardo <vgallardo@amcc.com>
18418 Date: Thu Sep 4 23:49:36 2008 -0700
18420 ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
18422 This patch adds GPCS, SGMII and M88E1112 PHY support
18423 for the AMCC PPC460GT/EX processors.
18425 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
18426 Signed-off-by: Stefan Roese <sr@denx.de>
18428 commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
18429 Author: Adam Graham <agraham@amcc.com>
18430 Date: Wed Sep 3 12:26:59 2008 -0700
18432 ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
18434 Signed-off-by: Adam Graham <agraham@amcc.com>
18435 Signed-off-by: Stefan Roese <sr@denx.de>
18437 commit 075d0b81e896e8735ae26372cd384f87cbd24e41
18438 Author: Adam Graham <agraham@amcc.com>
18439 Date: Wed Sep 3 12:26:28 2008 -0700
18441 ppc4xx: IBM Memory Controller DDR autocalibration routines
18443 Alternate SDRAM DDR autocalibration routine that can be generically used
18444 for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
18445 support of more DIMM/memory chip vendors and gets the DDR autocalibration
18446 values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
18448 Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
18449 "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
18450 of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
18451 lot longer to run than Method_B. Method_B executes in the same amount of time
18452 as the currently existing DDR autocalibration routine, i.e. 1 second or so.
18453 Normally Method_B is used and it is set as the default method.
18455 The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
18456 Controller registers.[bit-field]:
18457 1) SDRAM0_RQDC.[RQFD]
18458 2) SDRAM0_RFDC.[RFFD]
18460 This alternate PPC4xx DDR autocalibration code calibrates the following
18461 IBM SDRAM Controller registers.[bit-field]:
18463 1) SDRAM0_WRDTR.[WDTR]
18464 2) SDRAM0_CLKTR.[CKTR]
18465 3) SDRAM0_RQDC.[RQFD]
18466 4) SDRAM0_RFDC.[RFFD]
18468 and will also use the calibrated settings of the above four registers that
18469 produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
18470 register.[bit-field].
18472 Signed-off-by: Adam Graham <agraham@amcc.com>
18473 Signed-off-by: Stefan Roese <sr@denx.de>
18475 commit e07f4a8033b6270b8103049adb6456f660ff4a89
18476 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18477 Date: Mon Sep 1 13:09:39 2008 -0400
18479 ppc44x: Unification of virtex5 pp440 boards
18481 This patch provides an unificated way of handling xilinx v5 ppc440 boards.
18483 It unificates 3 different things:
18486 A new board called ppc440-generic has been created. This board includes
18487 a generic tlb initialization (Maps the whole memory into virtual) and
18488 defines board_pre_init, checkboard, initdram and get_sys_info weakly,
18489 so, they can be replaced by specific functions.
18491 If a new board needs to redefine any of the previous functions
18492 (specific initialization) it can create a new directory with the
18493 specific initializations needed. (see the example ml507 board).
18495 2) Configuration file
18496 Common configurations are located under configs/xilinx-ppc440.h, this
18497 header file interpretes the xparameters file generated by EDK and
18498 configurates u-boot in correspondence. Example: if there is a Temac,
18499 allows CMD_CONFIG_NET
18500 Specific configuration are located under specific configuration file.
18501 (see the example ml507 board)
18504 Some work has been done in order to not duplicate work in the Main
18505 Makefile. Please see the attached code.
18507 In order to support new boards they can be implemented in the next way:
18509 a) Simple Generic Board (90% of the time)
18510 Using EDK generates a new xparameters.h file, replace
18511 ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
18514 b) Simple Boards with special u-boot parameters (9 % of the time)
18515 Create a new file under configs for it (use ml507.h as example) and
18516 change your paramaters. Create a new Makefile paragraph and compile
18518 c) Complex boards (1% of the time)
18519 Create a new folder for the board, like the ml507
18521 Finally, it adds support for the Avnet FX30T Evaluation board, following
18522 the new generic structure:
18524 Cheap board by Avnet for evaluating the Virtex5 FX technology.
18526 This patch adds support for:
18531 Prior using U-boot in this board, read carefully the ERRATA by Avnet
18532 to solve some memory initialization issues.
18534 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
18535 Signed-off-by: Stefan Roese <sr@denx.de>
18537 commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
18538 Author: Nick Spence <nick.spence@freescale.com>
18539 Date: Tue Sep 2 15:21:16 2008 -0500
18541 mpc83xx: fix mpc8313 in-tree building with NAND
18543 and add mpc8313 NAND build to MAKEALL
18545 Signed-off-by: Nick Spence <nick.spence@freescale.com>
18546 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18548 commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
18549 Author: Nick Spence <nick.spence@freescale.com>
18550 Date: Thu Aug 28 14:09:25 2008 -0700
18552 mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
18554 Cleans up some latent issues with the data cache control so that
18555 dcache_enable() and dcache_disable() will work reliably (after
18556 unlock_ram_in_cache() has been called)
18558 Signed-off-by: Nick Spence <nick.spence@freescale.com>
18559 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18561 commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
18562 Author: Nick Spence <nick.spence@freescale.com>
18563 Date: Thu Aug 28 14:09:19 2008 -0700
18565 mpc83xx: Store and display Arbiter Event Register values
18567 Record the Arbiter Event Register values and optionally display them.
18569 The Arbiter Event Register can record the type and effective address of
18570 an arbiter error, even through an HRESET. This patch stores the values in
18571 the global data structure.
18573 Display of the Arbiter Event registers immediately after the RSR value
18574 can be enabled with defines. The Arbiter values will only be displayed
18575 if an arbiter event has occured since the last Power On Reset, and either
18576 of the following defines exist:
18577 #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
18578 and type register values
18579 #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
18580 event register values
18582 Address Only transactions are one of the trapped events that can register
18583 as an arbiter event. They occur with some cache manipulation instructions
18584 if the HID0_ABE (Address Broadcast Enable) is set and the memory region
18585 has the MEMORY_COHERENCE WIMG bit set. Setting:
18586 #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
18587 only events, so that it can still capture
18588 other real problems.
18590 Signed-off-by: Nick Spence <nick.spence@freescale.com>
18591 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18593 commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
18594 Author: Nick Spence <nick.spence@freescale.com>
18595 Date: Thu Aug 28 14:09:11 2008 -0700
18597 mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
18599 This is needed in unlock_ram_in_cache() because it is called from C and
18600 will corrupt the small data area anchor that is kept in R2.
18602 lock_ram_in_cache() is modified similarly as good coding practice, but
18603 is not called from C.
18605 Signed-off-by: Nick Spence <nick.spence@freescale.com>
18606 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18608 commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
18609 Author: Nick Spence <nick.spence@freescale.com>
18610 Date: Fri Aug 22 23:52:50 2008 -0700
18612 MPC83XX: Fix GPIO configuration - set gpio level before direction
18614 Set DAT value before DIR values to avoid creating glitches on the
18617 Set gpio level register before direction register to inhibit
18618 glitches on high level output pins.
18620 Dir and data gets cleared at powerup, so high level output lines see
18621 a short low pulse between setting the direction and level registers.
18623 Issue was seen on a new board with the nReset line of the NOR flash
18624 connected to a GPIO. Setting the direction register puts the NOR flash
18625 in reset so the next instruction to set the level cannot get executed.
18627 Signed-off-by: Nick Spence <nick.spence@freescale.com>
18628 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
18629 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18631 commit 7007c5975ee900ad70983b0681d3251e221f8321
18632 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18633 Date: Tue Sep 2 02:58:32 2008 +0200
18635 doc/qemu_mips: add doc howto debug u-boot with gdb
18637 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
18639 commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
18640 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18641 Date: Wed Sep 3 17:15:45 2008 +0200
18643 ppx4xx: Fix broken DASA_SIM board
18645 This patch adds initdram() to DASA_SIM boards that has been
18646 removed accidentally by a previous commit.
18648 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18649 Signed-off-by: Stefan Roese <sr@denx.de>
18651 commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
18652 Author: Stefan Roese <sr@denx.de>
18653 Date: Mon Sep 1 08:35:37 2008 +0200
18655 ppc4xx: Remove reference to common/lists.o from some esd linker scripts
18657 This patch removes some direct references to common/lists.o from some
18658 esd linker scripts. This is necessary because the lists source was moved
18659 and is not in the "common" directory anymore.
18661 Signed-off-by: Stefan Roese <sr@denx.de>
18663 commit 97b0734d65f8a0b03df0a335a2addc759da56107
18664 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18665 Date: Tue Sep 2 16:33:05 2008 +0200
18667 ppc4xx: Remove obsolete or unused functions from some esd boards
18669 This patch removes initdram() and testdram() from most esd 405 platforms.
18670 Some boards also have an empty dummy implementation of
18671 misc_init_f(). This is also removed.
18673 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18674 Signed-off-by: Stefan Roese <sr@denx.de>
18676 commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
18677 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18678 Date: Tue Sep 2 15:07:54 2008 +0200
18680 ppc4xx: Update VOM405 board configuration
18683 - add command line editing
18686 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18687 Signed-off-by: Stefan Roese <sr@denx.de>
18689 commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
18690 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18691 Date: Tue Sep 2 15:07:53 2008 +0200
18693 ppc4xx: Remove obsolete initdram() function from VOM405 board
18695 This patch removed the obsolete initdram() function from
18696 VOM405 platform file.
18698 Some minor cleanup.
18700 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18701 Signed-off-by: Stefan Roese <sr@denx.de>
18703 commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
18704 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18705 Date: Tue Sep 2 15:07:52 2008 +0200
18707 ppc4xx: Cleanup VOM405 linker script
18709 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18710 Signed-off-by: Stefan Roese <sr@denx.de>
18712 commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
18713 Author: Matthias Fuchs <mf@esd.eu>
18714 Date: Tue Sep 2 15:07:51 2008 +0200
18716 ppc4xx: Add fdt support for VOM405 boards
18718 Signed-off-by: Matthias Fuchs <mf@esd.eu>
18719 Signed-off-by: Stefan Roese <sr@denx.de>
18721 commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
18722 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18723 Date: Tue Sep 2 11:36:14 2008 +0200
18725 ppc4xx: Coding style cleanup
18727 Wrap long lines etc.
18729 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18730 Signed-off-by: Stefan Roese <sr@denx.de>
18732 commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
18733 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18734 Date: Tue Sep 2 11:35:56 2008 +0200
18736 ppc4xx: Enable USB on PLU405 boards
18738 This patch enables the PCI-OHCI controller on PLU405 board.
18740 Also the default CPU frequency is updated to 266 MHz and
18741 command line editing is enabled.
18743 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18744 Signed-off-by: Stefan Roese <sr@denx.de>
18746 commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
18747 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18748 Date: Tue Sep 2 11:35:35 2008 +0200
18750 ppc4xx: Cleanup PLU405 platform file
18753 - wraps some long lines
18754 - removes unused/obsolete functions: misc_init_f() and initdram()
18756 Signed-off-by: Matthias Fuchs <mf@esd.eu>
18757 Signed-off-by: Stefan Roese <sr@denx.de>
18759 commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
18760 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18761 Date: Tue Sep 2 11:35:04 2008 +0200
18763 ppc4xx: Cleanup PLU405 linker script
18765 Signed-off-by: Matthias Fuchs <mf@esd.eu>
18766 Signed-off-by: Stefan Roese <sr@denx.de>
18768 commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
18769 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18770 Date: Tue Sep 2 11:34:36 2008 +0200
18772 ppc4xx: Add fdt support for PLU405 boards
18774 Signed-off-by: Matthias Fuchs <mf@esd.eu>
18775 Signed-off-by: Stefan Roese <sr@denx.de>
18777 commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
18778 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
18779 Date: Tue Sep 2 11:34:08 2008 +0200
18781 ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
18783 Signed-off-by: Matthias Fuchs <mf@esd.eu>
18784 Signed-off-by: Stefan Roese <sr@denx.de>
18786 commit be1b0d2777e179191a57b138b660547a17e55aad
18787 Author: Jochen Friedrich <jochen@scram.de>
18788 Date: Tue Sep 2 11:24:59 2008 +0200
18790 Don't tftp to unknown flash
18792 If a board has a variable number of flash banks, there are empty entries
18793 in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
18794 "Outside available Flash". This patch skips flash banks with unknown
18797 Signed-off-by: Jochen Friedrich <jochen@scram.de>
18798 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18800 commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
18801 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
18802 Date: Thu Aug 28 13:40:44 2008 +0900
18804 net: smc911x: Add pkt_data_pull and pkt_data_push function
18806 The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
18807 Byte-swapping is necessary, and so poor performance is inevitable.
18808 This problem cannot evade by the swap function of CHIP, this can
18809 evade by software Byte-swapping.
18810 And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
18811 functions necessary to solve this problem.
18813 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
18814 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18816 commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
18817 Author: Ben Warren <biggerbadderben@gmail.com>
18818 Date: Sun Aug 31 20:37:00 2008 -0700
18820 Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
18851 Removed initialization of the driver from net/eth.c
18852 Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
18854 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18856 commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
18857 Author: Ben Warren <biggerbadderben@gmail.com>
18858 Date: Sun Aug 31 10:45:44 2008 -0700
18860 Moved initialization of TULIP Ethernet controller to board_eth_init()
18875 Removed initialization of the driver from net/eth.c
18877 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18879 commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
18880 Author: Ben Warren <biggerbadderben@gmail.com>
18881 Date: Sun Aug 31 10:44:19 2008 -0700
18883 Moved initialization of E1000 Ethernet controller to board_eth_init()
18890 Removed initialization of the driver from net/eth.c
18892 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18894 commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
18895 Author: Ben Warren <biggerbadderben@gmail.com>
18896 Date: Sun Aug 31 10:40:51 2008 -0700
18898 Moved initialization of plb2800 Ethernet driver to board_eth_init
18903 Removed initialization of controller from net/eth.c
18905 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18907 commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
18908 Author: Ben Warren <biggerbadderben@gmail.com>
18909 Date: Sun Aug 31 10:39:12 2008 -0700
18911 Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
18913 Modified board_eth_init() functions of boards that have this FEC in addition
18914 to other Ethernet controllers.
18925 Removed initialization of controller from net/eth.c
18927 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18929 commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
18930 Author: Ben Warren <biggerbadderben@gmail.com>
18931 Date: Sun Aug 31 10:36:38 2008 -0700
18933 Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
18935 Added a cpu_eth_init() function to MPC512x CPU directory and
18936 removed code from net/eth.c
18938 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18940 commit 8218bd2aa68820b878a8413493ae17fd8d21f944
18941 Author: Ben Warren <biggerbadderben@gmail.com>
18942 Date: Sun Aug 31 10:16:59 2008 -0700
18944 Moved initialization of IncaIP Ethernet controller to board_eth_init
18949 Removed initialization of the driver from net/eth.c
18951 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18953 commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
18954 Author: Ben Warren <biggerbadderben@gmail.com>
18955 Date: Sun Aug 31 10:15:26 2008 -0700
18957 Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
18962 Removed initialization of the driver from net/eth.c
18964 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18966 commit 6aca145e067efe75398e9fac97822bd3700de0b2
18967 Author: Ben Warren <biggerbadderben@gmail.com>
18968 Date: Sun Aug 31 10:13:34 2008 -0700
18970 Moved initialization of GT6426x Ethernet controller to board_eth_init()
18977 Removed initialization of the driver from net/eth.c
18979 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18981 commit e3090534d62045dcb73f5392bacc64a4e8e443dc
18982 Author: Ben Warren <biggerbadderben@gmail.com>
18983 Date: Sun Aug 31 10:08:43 2008 -0700
18985 Moved initialization of PCNET Ethernet controller to board_eth_init()
18991 Removed initialization of the driver from net/eth.c
18993 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
18995 commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
18996 Author: Ben Warren <biggerbadderben@gmail.com>
18997 Date: Sun Aug 31 10:07:16 2008 -0700
18999 Moved initialization of NATSEMI Ethernet controller to board_eth_init()
19004 Removed initialization of the driver from net/eth.c
19006 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19008 commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
19009 Author: Ben Warren <biggerbadderben@gmail.com>
19010 Date: Sun Aug 31 10:03:22 2008 -0700
19012 Moved initialization of NS8382X Ethernet controller to board_eth_init()
19026 Removed initialization of the driver from net/eth.c
19028 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19030 commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
19031 Author: Ben Warren <biggerbadderben@gmail.com>
19032 Date: Sun Aug 31 09:59:33 2008 -0700
19034 Moved initialization of TSI108 Ethernet controller to board_eth_init()
19039 Removed initialization of the driver from net/eth.c
19041 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19043 commit 0b252f50ae218ae15bfb63af44227972686ebc56
19044 Author: Ben Warren <biggerbadderben@gmail.com>
19045 Date: Sun Aug 31 21:41:08 2008 -0700
19047 Moved initialization of RTL8139 Ethernet controller to board_eth_init()
19056 Removed initialization of the driver from net/eth.c
19058 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19060 commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
19061 Author: Ben Warren <biggerbadderben@gmail.com>
19062 Date: Sun Aug 31 09:49:42 2008 -0700
19064 Moved initialization of RTL8169 Ethernet controller to board_eth_init()
19070 Removed initialization of the driver from net/eth.c
19072 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19074 commit 3ae071e44256144d6c1e3febb65f6c56bd433769
19075 Author: Ben Warren <biggerbadderben@gmail.com>
19076 Date: Tue Aug 12 22:11:53 2008 -0700
19078 Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
19080 Removed at91sam9_eth_initialize() from net/eth.c
19082 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19084 commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
19085 Author: Ben Warren <biggerbadderben@gmail.com>
19086 Date: Sun Aug 31 22:22:04 2008 -0700
19088 Introduce netdev.h header file and remove externs
19090 This addresses all drivers whose initializers have already
19091 been moved to board_eth_init()/cpu_eth_init().
19093 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19095 commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
19096 Author: Andy Fleming <afleming@freescale.com>
19097 Date: Sun Aug 31 16:33:30 2008 -0500
19099 Add pixis_set_sgmii command
19101 The 8544DS and 8572DS platforms support an optional SGMII riser card to
19102 expose ethernet over an SGMII interface. Once the card is in, it is also
19103 necessary to configure the board such that it uses the card, rather than
19104 the on-board ethernet ports. This can either be done by flipping dip switches
19105 on the motherboard, or by modifying registers in the pixis. Either way
19108 This adds a command to allow users to choose which ports are routed through
19109 the SGMII card, and which through the onboard ports. It also allows users
19110 to revert to the current switch settings.
19112 This code does not work on the 8572, as the PIXIS is different.
19114 Signed-off-by: Andy Fleming <afleming@freescale.com>
19115 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19117 commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
19118 Author: Andy Fleming <afleming@freescale.com>
19119 Date: Sun Aug 31 16:33:29 2008 -0500
19121 Add SGMII support for the 8544 DS
19123 The 8544 DS has an optional SGMII Riser card, which uses different PHY
19124 addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
19127 Signed-off-by: Andy Fleming <afleming@freescale.com>
19128 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19130 commit 652f7c2eef76a1340928bd660845441e932d86a2
19131 Author: Andy Fleming <afleming@freescale.com>
19132 Date: Sun Aug 31 16:33:28 2008 -0500
19134 Add support for Freescale SGMII Riser Card
19136 The 8544DS and 8572DS systems have an optional SGMII riser card which
19137 exposes new ethernet ports which are connected to the eTSECs via an
19138 SGMII interface. The SGMII PHYs for this board are offset from the standard
19139 PHY addresses, so this code modifies the passed in tsec_info structure to
19140 use the SGMII PHYs on the card, instead.
19142 Signed-off-by: Andy Fleming <afleming@freescale.com>
19143 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19145 commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
19146 Author: Andy Fleming <afleming@freescale.com>
19147 Date: Sun Aug 31 16:33:27 2008 -0500
19149 Add SGMII support to the tsec
19151 Adds support for configuring the TBI to talk properly with the SerDes.
19153 Signed-off-by: Andy Fleming <afleming@freescale.com>
19154 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19156 commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
19157 Author: Andy Fleming <afleming@freescale.com>
19158 Date: Sun Aug 31 16:33:26 2008 -0500
19160 Pass in tsec_info struct through tsec_initialize
19162 The tsec driver contains a hard-coded array of configuration information
19163 for the tsec ethernet controllers. We create a default function that works
19164 for most tsecs, and allow that to be overridden by board code. It creates
19165 an array of tsec_info structures, which are then parsed by the corresponding
19166 driver instance to determine configuration. Also, add regs, miiregs, and
19167 devname fields to the tsec_info structure, so that we don't need the kludgy
19170 Signed-off-by: Andy Fleming <afleming@freescale.com>
19171 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19173 commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
19174 Author: Andy Fleming <afleming@freescale.com>
19175 Date: Sun Aug 31 16:33:25 2008 -0500
19177 tsec: Move tsec.h to include/
19179 This is to prepare the way for board code passing in the tsec_info structure
19181 Signed-off-by: Andy Fleming <afleming@freescale.com>
19182 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19184 commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
19185 Author: Sergei Poselenov <sposelenov@emcraft.com>
19186 Date: Fri Jun 6 15:52:44 2008 +0200
19188 PHY: Add support for the M88E1121R Marvell chip.
19190 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
19191 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
19192 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19194 commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
19195 Author: Wolfgang Denk <wd@denx.de>
19196 Date: Tue Sep 2 21:17:36 2008 +0200
19198 fw_env.c: fix build problems with MTD_VERSION=old
19200 (as needed to support old 2.4 Linux kernel based releases)
19202 Signed-off-by: Wolfgang Denk <wd@denx.de>
19204 commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
19205 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19206 Date: Mon Sep 1 17:11:26 2008 +0200
19208 device: make device_register() clone the device
19210 This is expected by the callers, but this fact was hidden well within
19211 the old list implementation.
19213 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19215 commit baf449fc5ff96f071bb0e3789fd3265f6d4fd9a0
19216 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19217 Date: Mon Sep 1 14:00:07 2008 +0200
19219 avr32: Add support for "GPIO" port mux
19221 The "GPIO" port mux is used on AVR32 UC3 parts as well as AT32AP7200 and
19222 all later AVR32 chips. This patch adds a driver for it, implementing the
19223 same API as the existing portmux-pio driver but with more functionality.
19225 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19227 commit d92852579546c46bdaac978e0b6767a6645b69e0
19228 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19229 Date: Fri Aug 15 15:02:29 2008 +0200
19231 atstk1000: Convert to new-style makefile
19233 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19235 commit 25e6854d42c11046a468576179b5494f850311b2
19236 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19237 Date: Sun Aug 31 18:46:35 2008 +0200
19239 avr32: use board_early_init_r instead of board_init_info
19241 Replace the avr32-specific board_init_info hook by the standard
19242 board_early_init_r hook and make it optional.
19244 board_early_init_r() runs somewhat earlier than board_init_info used to
19245 do, but this isn't a problem for any of the in-tree boards.
19247 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19249 commit 36d375faf5cff98e8dca32aabbbb1ec6036437dd
19250 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19251 Date: Sun Aug 31 18:24:24 2008 +0200
19253 avr32: Use board_postclk_init instead of gclk_init
19255 Replace the avr32-specific gclk_init() board hook with the standard
19256 board_postclk_init() hook which is supposed to run at the same point
19257 during initialization.
19259 Provide a dummy weak alias for boards not implementing this hook. The
19261 - 2 bytes for the dummy function (retal 0)
19262 - 2 bytes for each unnecessary function call (short rcall)
19264 which is a pretty small price to pay for avoiding lots of #ifdef
19265 clutter. In this particular case, all boards probably end up slightly
19266 smaller because we avoid the conditional checking if the gclk_init
19269 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19271 commit abdde2b1d570b1ee77606bf783444fcddf7f0965
19272 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19273 Date: Sun Aug 31 18:07:35 2008 +0200
19275 hammerhead: Use gclk helper functions
19277 Use the new gclk helper functions to set up the PHY clock instead of
19278 accessing the PM registers directly.
19280 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19282 commit 98090cd75cdb40b2ab94c806c338540a5716748b
19283 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19284 Date: Sun Aug 31 18:05:32 2008 +0200
19286 avr32: Add gclk helper functions
19288 Add two helper functions for configuring and enabling generic clocks:
19289 - gclk_enable_output: Enables output on a GCLKx pin
19290 - gclk_set_rate: Configures a gclk to run at a specific rate
19292 This should eliminate any reason to go mucking about with PM registers
19295 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19297 commit ab0df36fc7db9dda0b786b909f653e279dfeb9cf
19298 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19299 Date: Fri Aug 29 21:09:49 2008 +0200
19301 avr32: refactor the portmux/gpio code
19303 - Separate the portmux configuration functionality from the GPIO pin
19305 - Separate the controller-specific code from the chip-specific code.
19306 - Allow "ganged" port configuration (multiple pins at once).
19307 - Add more flexibility to the "canned" peripheral select functions:
19308 - Allow using more than 23 address bits, more chip selects, as
19309 well as NAND- and CF-specific pins.
19310 - Make the MACB SPEED pin optional, and choose between MII/RMII
19311 using a parameter instead of an #ifdef.
19312 - Make it possible to use other MMC slots than slot 0, and support
19313 different MMC/SDCard data bus widths.
19314 - Use more reasonable pull-up defaults; floating pins may consume a
19316 - Get rid of some custom portmux code from the mimc200 board code. The
19317 old gpio/portmux API couldn't really handle its requirements, but
19319 - Add documentation.
19321 The end result is slightly smaller code for all boards. Which isn't
19322 really the point, but at least it isn't any larger.
19324 This has been verified on ATSTK1002 and ATNGW100. I'd appreciate if
19325 the board maintainers could help me test this on their boards. In
19326 particular, the mimc200 port has lost a lot of code, so I'm hoping Mark
19329 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19330 Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
19331 Cc: Mark Jackson <mpfj@mimc.co.uk>
19332 Cc: Alex Raimondi <alex.raimondi@miromico.ch>
19333 Cc: Julien May <julien.may@miromico.ch>
19336 * Enable pullup on NWAIT
19337 * Add missing include to portmux-pio.h
19338 * Rename CONFIG_PIO2 -> CONFIG_PORTMUX_PIO to match docs
19340 commit 4c24e8288c601cb773ab02528b48a8577970e867
19341 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19342 Date: Sat Aug 30 17:28:36 2008 +0200
19344 avr32: data_bits should reflect the actual number of data bits
19346 Make the data_bits enum in struct sdram_config reflect the actual number
19347 of data bits on the bus, i.e. 16 or 32. Having 0 mean 16 bits and 1 mean
19348 32 bits is just too confusing.
19350 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19352 commit 66b7bc5175325809718d8d49ef073bc1036ad71b
19353 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19354 Date: Fri Aug 29 17:48:18 2008 +0200
19356 avr32: Update README
19358 Remove some outdated and/or unnecessary information, and add updated
19359 information about the toolchain and buildroot.
19361 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
19363 commit c75e772a2f061a508bba28ded1b5bea91f0442b0
19364 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19365 Date: Sun Aug 31 23:28:15 2008 +0900
19367 sh: Remove CC line from board's Makefile
19369 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19371 commit 468eae0660de6fdfd9999944c536ecc4797bd944
19372 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19373 Date: Sun Aug 31 23:25:57 2008 +0900
19375 sh: Replaced "@./mkconfig" for @$(MKCONFIG)
19377 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19379 commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
19380 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19381 Date: Thu Aug 28 14:50:52 2008 +0900
19383 sh: Add support sh2 to MAKEALL
19385 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19386 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19388 commit 6f3d8bb5faa12dbf3031382286784c978df038ee
19389 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19390 Date: Thu Aug 28 14:52:23 2008 +0900
19392 sh: Fix compile error rsk7203 board
19394 This boards used old type preprocessor.
19395 This patch fix compile error.
19397 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19398 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19400 commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
19401 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19402 Date: Thu Aug 28 14:53:31 2008 +0900
19404 sh: Fix compile error sh7785lcr board
19406 This boards used old type preprocessor.
19407 This patch fix compile error.
19409 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19410 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19412 commit 6f0da4972e48f99d37bc522814940a6022cd3084
19413 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19414 Date: Fri Aug 22 17:39:09 2008 +0900
19416 sh: Renesas Solutions AP325RXA board support
19418 AP325RXA is SH7723's reference board.
19419 This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
19420 In this patch, support SCIF, NOR Flash, and Ethernet.
19422 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19423 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19425 commit ab09f433b50bb83b5e440c335bc3839ee069e534
19426 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19427 Date: Fri Aug 22 17:48:51 2008 +0900
19429 sh: add support Renesas SH7723
19431 Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
19432 This patch supports CPU register's header file and SCIF serial driver.
19434 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19435 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19437 commit c655fad06ba3fb042dbc667724a40e1a9a091248
19438 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19439 Date: Sun Aug 31 23:02:04 2008 +0900
19441 sh: Renesas RSK+ 7203 board support
19443 This adds initial support for the RTE RSK+ SH7203 board.
19445 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19446 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19448 commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
19449 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19450 Date: Thu Jul 3 23:11:02 2008 +0900
19452 sh: Add support Renesas SH7203 processor
19454 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19455 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19457 commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
19458 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19459 Date: Sun Aug 31 22:48:33 2008 +0900
19461 sh: Add support SH2/SH2A which is CPU of Renesas Technology
19463 Add support SH2/SH2A basic function.
19465 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
19466 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19468 commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
19469 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19470 Date: Sun Aug 31 22:45:08 2008 +0900
19472 sh: Renesas R0P7785LC0011RL board support
19474 This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
19475 Graphic, Ethernet, USB, SD, RTC, and I2C controller.
19477 This patch supports the following functions:
19478 - 128MB DDR2-SDRAM (29-bit address mode only)
19483 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
19484 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19486 commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
19487 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
19488 Date: Thu Jul 10 19:32:53 2008 +0900
19490 sh: add support for SH7785
19492 Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
19493 This patch supports CPU register's header file.
19495 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
19496 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19498 commit d6e04258be8f2408845468d3cf722a4cf0433445
19499 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19500 Date: Sun Aug 31 04:45:42 2008 +0200
19502 davinci: fix remaining dm644x_eth
19504 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19506 commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
19507 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19508 Date: Sun Aug 31 04:24:56 2008 +0200
19510 fs: Move conditional compilation to Makefile
19512 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19514 commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
19515 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19516 Date: Sun Aug 31 04:24:55 2008 +0200
19518 devices: merge to list_head
19520 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19522 commit ef0255fc75f28655f9681422079287d68a14dbaa
19523 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19524 Date: Sun Aug 31 04:24:51 2008 +0200
19528 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19530 commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
19531 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19532 Date: Sun Aug 31 00:39:48 2008 +0200
19534 smdk6400: add gitignore
19536 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19538 commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
19539 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19540 Date: Sun Aug 31 00:39:48 2008 +0200
19542 smdk6400: Use CONFIG_FLASH_CFI_DRIVER
19544 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19546 commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
19547 Author: Guennadi Liakhovetski <lg@denx.de>
19548 Date: Sun Aug 31 00:39:47 2008 +0200
19550 smdk6400: remove redundant bootargs definition
19552 Double bootargs setting leads to a duplicated environmant entry.
19554 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19556 commit 11edcfe260f20dcea79284a3e95270989d433854
19557 Author: Guennadi Liakhovetski <lg@denx.de>
19558 Date: Sun Aug 31 00:39:47 2008 +0200
19560 ARM: Add support for S3C6400 based SMDK6400 board
19562 SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
19563 driver for it too. The board can also boot from the NOR flash, but due to
19564 hardware limitations it can only address 64KiB on it, which is not enough
19565 for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
19567 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19569 commit e0056b341069796eaea11eae0fc8eb93a3dceaac
19570 Author: Guennadi Liakhovetski <lg@denx.de>
19571 Date: Sun Aug 31 00:39:47 2008 +0200
19573 NAND: add NAND driver for S3C64XX
19575 Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
19577 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19579 commit 3fe7b589f9c7463df39056f8872006a67f56a91c
19580 Author: Guennadi Liakhovetski <lg@denx.de>
19581 Date: Sun Aug 31 00:39:47 2008 +0200
19583 S3C64XX: remove broken HWFLOW support from the serial driver
19585 As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
19586 broken and currently unused. Remove it.
19588 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19590 commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
19591 Author: Guennadi Liakhovetski <lg@denx.de>
19592 Date: Sun Aug 31 00:39:47 2008 +0200
19594 serial: add S3C64XX serial driver
19596 Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
19598 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19600 commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
19601 Author: Guennadi Liakhovetski <lg@denx.de>
19602 Date: Sun Aug 31 00:39:46 2008 +0200
19604 USB: Add support for OHCI controller on S3C6400
19606 Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
19607 try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
19608 it should work too and we could still profit from instruction cache.
19610 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19612 commit 9b07773f8883665b002500c190507e9fd99b7181
19613 Author: Guennadi Liakhovetski <lg@denx.de>
19614 Date: Sun Aug 31 00:39:46 2008 +0200
19616 ARM: Add arm1176 core with S3C6400 SoC
19618 Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
19620 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
19622 commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
19623 Author: Sandeep Paulraj <s-paulraj@ti.com>
19624 Date: Sun Aug 31 00:39:46 2008 +0200
19626 ARM DaVinci: Changing function names for EMAC driver
19628 DM644x is just one of a series of DaVinci chips that use the EMAC driver.
19629 By replacing all the function names that start with dm644x_* to davinci_*
19630 we make these function more portable. I have tested this change on my EVM.
19631 DM6467 is another DaVinci SOC which uses the EMAC driver and i will
19632 be sending patches that add DaVinci DM6467 support to the list soon.
19634 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
19636 commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
19637 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
19638 Date: Sat Aug 30 23:21:30 2008 +0200
19640 Integrator[AP/CP] - Remove unused file memsetup.S
19642 - memsetup.s is changed/merged to lowlevel_init.S
19643 memsetup.S has a global label memsetup that just returns back to caller
19644 - memsetup global label is changed/merged to lowlevel_init
19645 This label is not called from anywhere.
19647 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
19649 commit 89d51d022a63be1a851eda983c8cbce1a044f65f
19650 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19651 Date: Wed Aug 27 21:35:52 2008 +0200
19653 ARM DaVinci: Standardize names of directories/files
19655 ARM DaVinci: Standardize names of directories/files.
19657 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19658 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19660 commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
19661 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19662 Date: Fri Jul 11 15:10:13 2008 -0400
19664 ARM DaVinci: Move common functions to board/davinci/common
19666 ARM DaVinci: Move common functions to board/davinci/common.
19668 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
19670 commit c2b4b2e4814f4ace9015fdb64132894327400bf0
19671 Author: Stefan Roese <sr@denx.de>
19672 Date: Fri Aug 29 11:56:49 2008 +0200
19674 ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
19676 This function is needed for the new NAND infrastructure. We only need
19677 a dummy implementation though for the NDFC.
19679 Signed-off-by: Stefan Roese <sr@denx.de>
19681 commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
19682 Author: Stefan Roese <sr@denx.de>
19683 Date: Fri Aug 29 12:06:27 2008 +0200
19685 ppc4xx: Increase image size for NAND boot target
19687 This is needed since now with HUSH enabled (amcc-common.h) the image
19688 read from NAND exceeds the previous limit.
19690 Signed-off-by: Stefan Roese <sr@denx.de>
19692 commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
19693 Author: Ben Warren <biggerbadderben@gmail.com>
19694 Date: Thu Aug 28 23:58:30 2008 -0700
19696 Move MPC512x_FEC driver to drivers/net
19698 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19700 commit 80b00af01b3c9154774de2936f05a051e92f6a03
19701 Author: Ben Warren <biggerbadderben@gmail.com>
19702 Date: Thu Aug 28 23:58:29 2008 -0700
19704 Move MPC5xxx_FEC driver to drivers/net
19706 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
19708 commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
19709 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19710 Date: Fri Aug 29 21:53:57 2008 +0200
19712 cmd_terminal: remove no need ifdef
19714 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19716 commit 578118bdf122877ae769776be002255be447b4fa
19717 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19718 Date: Fri Aug 29 21:53:57 2008 +0200
19720 common/Makefile: order by functionality
19722 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19724 commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
19725 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19726 Date: Fri Aug 29 21:53:56 2008 +0200
19728 miiphyutil: Move conditional compilation to Makefile
19730 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19732 commit 81789c39db3f0f6b621df8c0ec66014d701f368e
19733 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19734 Date: Fri Aug 29 21:53:37 2008 +0200
19736 autoscript: Move conditional compilation to Makefile
19738 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19740 commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
19741 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19742 Date: Fri Aug 29 01:18:11 2008 +0200
19744 crc16: move to lib_generic
19746 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19748 commit 55195773eacefb22dd483a3c560ea30a14263ce1
19749 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19750 Date: Fri Aug 29 01:18:01 2008 +0200
19752 miiphybb: move to drivers/net/phy
19754 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19756 commit e8314035996a9118ac5948df2ff8a2f2161ed67a
19757 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19758 Date: Thu Aug 28 12:31:51 2008 +0200
19760 soft_spi: move to drivers/spi
19762 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19764 commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
19765 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19766 Date: Thu Aug 28 12:31:51 2008 +0200
19768 soft_i2c: move to drivers/i2c
19770 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19772 commit 717a222229fdb77703e9174d0eb08a4b41febf49
19773 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19774 Date: Thu Aug 28 12:31:48 2008 +0200
19776 gunzip: move to lib_generic
19778 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19780 commit 52aef8f9ba28b747973bf76741c23db658d5773c
19781 Author: Wolfgang Ocker <weo@reccoware.de>
19782 Date: Tue Aug 26 19:55:23 2008 +0200
19784 ppc4xx: NAND configuration
19786 Made NAND bank configuration setting a config variable.
19788 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
19789 Signed-off-by: Stefan Roese <sr@denx.de>
19791 commit 5bc542a593abc9e974fbd34704af85c37c366c60
19792 Author: Victor Gallardo <vgallardo@amcc.com>
19793 Date: Thu Aug 28 16:03:28 2008 -0700
19795 ppc4xx: fix UIC external_interrupt hang on UIC0
19797 This patch fixes a UIC external_interrupt hang if critical or non-critical
19798 interrupt is set at the same time as a normal interrupt is set on UIC0.
19800 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
19801 Signed-off-by: Stefan Roese <sr@denx.de>
19803 commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
19804 Author: Prodyut Hazarika <phazarika@amcc.com>
19805 Date: Wed Aug 27 16:39:00 2008 -0700
19807 ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
19809 Removed Magic numbers from Initialization preload registers
19810 Tested with Kilauea, Glacier, Canyonlands and Katmai boards
19811 About 5-7% improvement seen for LMBench memtests
19813 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
19814 Signed-off-by: Stefan Roese <sr@denx.de>
19816 commit 8a490422bed685c9491274ec997f62061d88620b
19817 Author: John Rigby <jrigby@freescale.com>
19818 Date: Thu Aug 28 13:17:07 2008 -0600
19820 ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
19822 MPC5121 rev 2 silicon has a new register for controlling how long
19823 CS is asserted after deassertion of ALE in multiplexed mode.
19825 The default is to assert CS together with ALE. The alternative
19826 is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
19828 The default is wrong for the NOR flash and CPLD on the ADS5121.
19830 This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
19831 it does so conditionally based on silicon rev 2.0 or greater.
19833 Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
19834 Signed-off-by: John Rigby <jrigby@freescale.com>
19836 commit 5d9a5efa4b332f442b54a755d49969123c3a8742
19837 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19838 Date: Tue Aug 19 00:56:46 2008 +0600
19840 Add I2C frequency dividers for ColdFire
19842 The existing I2C freqency dividers for FDR does not apply
19843 to ColdFire platforms; thus, a seperate table is added
19844 based on MCF5xxx Reference Manual
19846 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
19847 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19848 Acked-by: Tabi Timur <timur@freescale.com>
19850 commit eec567a67e00d1ed8d941e9098b7d421f4091abf
19851 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19852 Date: Tue Aug 19 03:01:19 2008 +0600
19854 ColdFire: I2C fix for multiple platforms
19856 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19858 commit d53cf6a9c7423cba668b867978648645f71c3090
19859 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19860 Date: Tue Aug 19 00:37:13 2008 +0600
19862 ColdFire: Add CONFIG_MII_INIT for M5272C3
19864 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19866 commit f78ced3028d4130b24a318943a70cf5584ab16f4
19867 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19868 Date: Tue Aug 19 00:26:25 2008 +0600
19870 ColdFire: Multiple fixes for MCF5445x platforms
19872 Add FEC pin set and mii reset in __mii_init(). Change
19873 legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
19874 change cfi_offset to 0, and change CFG_FLASH_CFI to
19875 CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
19876 M54455EVB env settings in configuration file.
19878 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19880 commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
19881 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19882 Date: Fri Aug 15 18:24:25 2008 +0000
19884 ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
19886 The user manuals recommend 7.
19888 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
19889 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19891 commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
19892 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19893 Date: Fri Aug 15 16:50:07 2008 +0000
19895 ColdFire: Raise uart baudrate to 115200 bps
19897 M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
19898 uart baudrate increase from 19200 to 115200 bps
19900 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19902 commit ab6ba842682552ccf071d0034da0a20633d1d1ac
19903 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19904 Date: Wed Aug 13 12:07:03 2008 +0000
19906 ColdFire: Fix board.c warning message
19908 Implicit declaration of nand_init() warning message
19910 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
19912 commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
19913 Author: Kumar Gala <galak@kernel.crashing.org>
19914 Date: Wed Aug 27 01:10:34 2008 -0500
19916 FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
19918 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19920 commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
19921 Author: Heiko Schocher <hs@denx.de>
19922 Date: Thu Aug 21 20:44:49 2008 +0200
19924 mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
19926 Signed-off-by: Heiko Schocher <hs@denx.de>
19928 commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
19929 Author: Kumar Gala <galak@kernel.crashing.org>
19930 Date: Tue Aug 19 14:46:36 2008 -0500
19932 mpc85xx: remove redudant code with lib_ppc/interrupts.c
19934 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
19935 not show how that happened, but there is no good reason for it.
19937 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
19940 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19942 commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
19943 Author: Kumar Gala <galak@kernel.crashing.org>
19944 Date: Fri Jul 25 13:31:05 2008 -0500
19946 mpc85xx: Add support for the MPC8536DS reference board
19948 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19949 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
19950 Signed-off-by: Dejan Minic <minic@freescale.com>
19951 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19952 Signed-off-by: Dave Liu <daveliu@freescale.com>
19953 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19955 commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
19956 Author: Kumar Gala <galak@kernel.crashing.org>
19957 Date: Tue Aug 12 11:14:19 2008 -0500
19959 mpc85xx: Add support for the MPC8536
19961 The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
19962 also have SERDES init code for the 8536.
19964 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19965 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
19966 Signed-off-by: Dejan Minic <minic@freescale.com>
19967 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
19968 Signed-off-by: Dave Liu <daveliu@freescale.com>
19970 commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
19971 Author: Kumar Gala <galak@kernel.crashing.org>
19972 Date: Tue Aug 12 11:13:08 2008 -0500
19974 mpc85xx: Add support for the MPC8572DS reference board
19976 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19978 commit 457caecdbca3df21a93abff19eab12dbc61b7897
19979 Author: Kumar Gala <galak@kernel.crashing.org>
19980 Date: Wed Aug 27 01:05:35 2008 -0500
19982 FSL DDR: Remove old SPD support from cpu/mpc85xx
19984 All 85xx boards have been converted to the new code so we can
19985 remove the old SPD DDR setup code.
19987 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19989 commit 0e7927db138976469e7257e29c1338050a50fcd9
19990 Author: Kumar Gala <galak@kernel.crashing.org>
19991 Date: Wed Aug 27 01:04:07 2008 -0500
19993 FSL DDR: Convert STXSSA to new DDR code.
19995 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19997 commit c360d9b970fbb9c13744c355879671165bbb9b9e
19998 Author: Kumar Gala <galak@kernel.crashing.org>
19999 Date: Wed Aug 27 01:03:42 2008 -0500
20001 FSL DDR: Convert STXGP3 to new DDR code.
20003 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20005 commit 8e55313b7ae12352a343f9b9962e662dbd897187
20006 Author: Kumar Gala <galak@kernel.crashing.org>
20007 Date: Tue Aug 26 23:52:58 2008 -0500
20009 FSL DDR: Convert SBC8560 to new DDR code.
20011 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20013 commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
20014 Author: Kumar Gala <galak@kernel.crashing.org>
20015 Date: Tue Aug 26 23:52:32 2008 -0500
20017 FSL DDR: Convert MPC8540EVAL to new DDR code.
20019 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20021 commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
20022 Author: Kumar Gala <galak@kernel.crashing.org>
20023 Date: Tue Aug 26 23:52:07 2008 -0500
20025 FSL DDR: Convert PM856 to new DDR code.
20027 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20029 commit d53bd3e17bd4f460257c19255569ea6dcfaae817
20030 Author: Kumar Gala <galak@kernel.crashing.org>
20031 Date: Tue Aug 26 23:51:49 2008 -0500
20033 FSL DDR: Convert PM854 to new DDR code.
20035 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20037 commit 33b9079ba20926f14238fff863b68a98e938948e
20038 Author: Kumar Gala <galak@kernel.crashing.org>
20039 Date: Tue Aug 26 23:15:28 2008 -0500
20041 FSL DDR: Convert sbc8548 to new DDR code.
20043 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20045 commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
20046 Author: Kumar Gala <galak@kernel.crashing.org>
20047 Date: Tue Aug 26 23:14:14 2008 -0500
20049 FSL DDR: Convert atum8548 to new DDR code.
20051 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20053 commit be0bd8234b9777ecd63c4c686f72af070d886517
20054 Author: Kumar Gala <galak@kernel.crashing.org>
20055 Date: Tue Aug 26 22:56:56 2008 -0500
20057 FSL DDR: Convert socrates to new DDR code.
20059 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20061 commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
20062 Author: Kumar Gala <galak@kernel.crashing.org>
20063 Date: Tue Aug 26 08:02:30 2008 -0500
20065 FSL DDR: Convert MPC8544DS to new DDR code.
20067 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20069 commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
20070 Author: Jon Loeliger <jdl@freescale.com>
20071 Date: Tue Mar 18 13:51:05 2008 -0500
20073 FSL DDR: Convert MPC8568MDS to new DDR code.
20075 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20076 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20078 commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
20079 Author: Jon Loeliger <jdl@freescale.com>
20080 Date: Tue Mar 18 13:51:06 2008 -0500
20082 FSL DDR: Convert MPC8548CDS to new DDR code.
20084 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20085 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20087 commit aa11d85cf318b961e029fe50d68ca47d004bce93
20088 Author: Jon Loeliger <jdl@freescale.com>
20089 Date: Mon Mar 17 15:48:18 2008 -0500
20091 FSL DDR: Convert MPC8541CDS to new DDR code.
20093 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20094 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20096 commit 2b40edb10d81da7bba724edbccd7f53777112579
20097 Author: Jon Loeliger <jdl@freescale.com>
20098 Date: Tue Mar 18 11:12:42 2008 -0500
20100 FSL DDR: Convert MPC8555ADS to new DDR code.
20102 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20103 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20105 commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
20106 Author: Jon Loeliger <jdl@freescale.com>
20107 Date: Tue Mar 18 11:12:44 2008 -0500
20109 FSL DDR: Convert MPC8560ADS to new DDR code.
20111 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20112 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20114 commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
20115 Author: Kumar Gala <galak@kernel.crashing.org>
20116 Date: Fri Jun 6 13:12:18 2008 -0500
20118 FSL DDR: Convert MPC8540ADS to new DDR code.
20120 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20122 commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
20123 Author: Kumar Gala <galak@kernel.crashing.org>
20124 Date: Tue Aug 26 21:34:55 2008 -0500
20126 FSL DDR: Add 85xx specific register setting
20128 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20130 commit 6fb1b7346849ccd0c20306143e334f5b76143070
20131 Author: Kumar Gala <galak@kernel.crashing.org>
20132 Date: Mon Jun 9 11:07:46 2008 -0500
20134 FSL DDR: Add e500 TLB helper for DDR code
20136 Provide a helper function that board code can call to map TLBs when
20139 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20141 commit d26b739afe5a6760bd345743188759cd9d0f3b47
20142 Author: Andrew Dyer <adyer@righthandtech.com>
20143 Date: Tue Aug 26 17:03:38 2008 -0500
20145 dm9000 remove dead external phy support, gpio fix
20147 dm9000 has code to detect and initialize external phy parts, but later
20148 on in the code the part is forced to use the internal phy
20149 unconditionally. Remove the unused/untested code.
20151 change the GPIO initialization so that only the GPIO used as an
20152 internal phy reset (hardwired in the chip) is set as an output. The
20153 remaining GPIO need to be handled by board specific code to prevent
20154 possible drive conflicts. Set as inputs for safety.
20156 replace a few magic numbers with defines
20158 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
20159 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20161 commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
20162 Author: Peter Tyser <ptyser@xes-inc.com>
20163 Date: Tue Aug 26 11:17:48 2008 -0500
20165 Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
20167 cmd_net.c command descriptions were updated to describe the optional
20168 hostIPaddr argument. The dhcp command help message was also updated
20169 to more closely reflect the other commands in cmd_net.c
20171 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
20172 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20174 commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
20175 Author: Remy Bohmer <linux@bohmer.net>
20176 Date: Wed Aug 20 11:30:28 2008 +0200
20178 Fix bogus error message in the DHCP handler
20180 The DHCP handler has 1 state that is not listed in this case, causing a
20181 failure message when there is actually no failure.
20183 Signed-off-by: Remy Bohmer <linux@bohmer.net>
20184 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20186 commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
20187 Author: Remy Bohmer <linux@bohmer.net>
20188 Date: Wed Aug 20 11:30:27 2008 +0200
20190 Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
20192 The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
20193 missing extern inside the net/bootp.h header
20195 Signed-off-by: Remy Bohmer <linux@bohmer.net>
20196 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20198 commit 1803f7f91ff35ca402259065df7557107dcf28a2
20199 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20200 Date: Tue Aug 19 21:26:32 2008 +0000
20202 ColdFire: Add FEC Buffer descriptors in SRAM
20204 Add FEC Buffer descriptors and data buffer in SRAM for
20205 faster execution and access.
20207 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20208 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20210 commit 429be27ce195210d4b9decf9e867b9ca6155a87d
20211 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20212 Date: Thu Aug 21 23:55:11 2008 +0000
20214 Fix ColdFire FEC warning messages
20216 Types mismatch and implicit declaration of icache_invalid()
20219 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
20220 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20222 commit 6a002171098e968bd5b362347d2831224fab6048
20223 Author: Ben Warren <biggerbadderben@gmail.com>
20224 Date: Sat Jul 12 00:17:50 2008 -0700
20226 Moved initialization of SKGE Ethernet driver to board code.
20228 The only board using this driver is the SL8245 board.
20229 Removed initialization for the driver from net/eth.c
20231 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20233 commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
20234 Author: Ben Warren <biggerbadderben@gmail.com>
20235 Date: Sat Jul 12 00:08:45 2008 -0700
20237 Moved conditional compilation to Makefile for SK98 Ethernet driver
20239 Brute-force removal of #ifdefs. Didn't touch the code.
20240 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20242 commit 65d3d99c28dc363d15eaee78225ff643df499b97
20243 Author: Ben Warren <biggerbadderben@gmail.com>
20244 Date: Fri Jul 11 23:42:19 2008 -0700
20246 Moved initialization of ULI526X Ethernet driver to board code.
20248 The only board using this driver is the Freescale MPC8610HPCD board.
20249 Removed initialization for the driver from net/eth.c
20251 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20253 commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
20254 Author: Ben Warren <biggerbadderben@gmail.com>
20255 Date: Fri Jul 11 23:15:28 2008 -0700
20257 Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
20259 Added board_eth_init() function to bf537-stamp board.
20260 Removed initialization for the Blackin EMAC driver from net/eth.c
20262 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20264 commit fc363ce35408f348cacced68505f3747a53e3d7c
20265 Author: Ben Warren <biggerbadderben@gmail.com>
20266 Date: Wed Jul 9 01:04:19 2008 -0700
20268 Moved initialization of GRETH Ethernet driver to CPU directory
20270 Added a cpu_eth_init() function to leon2/leon3 CPU directories and
20271 removed code from net/eth.c
20273 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20275 commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
20276 Author: Ben Warren <biggerbadderben@gmail.com>
20277 Date: Tue Aug 26 22:16:25 2008 -0700
20279 Moved initialization of MCFFEC Ethernet driver to CPU directory
20281 Added a cpu_eth_init() function to coldfire CPU directories and
20282 removed code from net/eth.c
20284 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20286 commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
20287 Author: Ben Warren <biggerbadderben@gmail.com>
20288 Date: Tue Aug 26 22:12:36 2008 -0700
20290 Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
20292 Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
20293 removed code from net/eth.c
20295 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
20297 commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
20298 Author: Kumar Gala <galak@kernel.crashing.org>
20299 Date: Tue Aug 26 15:01:38 2008 -0500
20301 FSL DDR: Remove old SPD support from cpu/mpc86xx
20303 All 86xx boards have been converted to the new code so we can
20304 remove the old SPD DDR setup code.
20306 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20308 commit 9bd4e5911b750837515466bc7449087698b88e0e
20309 Author: Kumar Gala <galak@kernel.crashing.org>
20310 Date: Tue Aug 26 15:01:37 2008 -0500
20312 FSL DDR: Convert SBC8641D to new DDR code.
20314 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20316 commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
20317 Author: Jon Loeliger <jdl@freescale.com>
20318 Date: Tue Aug 26 15:01:36 2008 -0500
20320 FSL DDR: Convert MPC8610HPCD to new DDR code.
20322 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20323 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20325 commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
20326 Author: Kumar Gala <galak@kernel.crashing.org>
20327 Date: Tue Aug 26 15:01:35 2008 -0500
20329 FSL DDR: Convert MPC8641HPCN to new DDR code.
20331 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20332 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20334 commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
20335 Author: Kumar Gala <galak@kernel.crashing.org>
20336 Date: Tue Aug 26 15:01:34 2008 -0500
20338 FSL DDR: Add 86xx specific register setting
20340 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20342 commit 233fdd502a6c227f476212b3097653ad48d7e254
20343 Author: Kumar Gala <galak@kernel.crashing.org>
20344 Date: Tue Aug 26 15:01:32 2008 -0500
20346 FSL DDR: Add DDR2 DIMM paramter support
20348 Compute DIMM parameters based upon the SPD information.
20350 Signed-off-by: James Yang <James.Yang@freescale.com>
20351 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20352 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20354 commit 05c05a2363a6ac11e0e405926034546ffad71fad
20355 Author: Kumar Gala <galak@kernel.crashing.org>
20356 Date: Tue Aug 26 15:01:30 2008 -0500
20358 FSL DDR: Add DDR1 DIMM paramter support
20360 Compute DIMM parameters based upon the SPD information in spd.
20362 Signed-off-by: James Yang <James.Yang@freescale.com>
20363 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20364 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20366 commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
20367 Author: Kumar Gala <galak@kernel.crashing.org>
20368 Date: Tue Aug 26 15:01:29 2008 -0500
20370 FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
20372 The main purpose of this rewrite it to be able to share the same
20373 initialization code on all FSL PowerPC products that have DDR
20374 controllers. (83xx, 85xx, 86xx).
20376 The code is broken up into the following steps:
20379 COMPUTE_COMMON_PARMS
20385 This allows us to share more code an easily allow for board specific code
20388 Additionally this code base adds support for >4G of DDR and provides a
20389 foundation for supporting interleaving on processors with more than one
20392 Signed-off-by: James Yang <James.Yang@freescale.com>
20393 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20394 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
20395 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
20396 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20398 commit f784e32b4bce0013983506b11af4b85b8ca3d36e
20399 Author: Kumar Gala <galak@kernel.crashing.org>
20400 Date: Tue Aug 26 15:01:28 2008 -0500
20402 FSL DDR: Provide a generic set_ddr_laws()
20404 Provide a helper function that will setup the last available
20405 LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
20407 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20409 commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
20410 Author: James Yang <James.Yang@freescale.com>
20411 Date: Tue Aug 26 15:01:27 2008 -0500
20413 Add proper SPD definitions for DDR1/2/3
20415 Also adds helper functions for DDR1/2 to verify the checksum.
20417 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20419 commit 285db74716c724ae8a0ff177878fd09a74428c7b
20420 Author: Wolfgang Denk <wd@denx.de>
20421 Date: Wed Aug 27 01:02:48 2008 +0200
20425 Signed-off-by: Wolfgang Denk <wd@denx.de>
20427 commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
20428 Author: Heiko Schocher <hs@denx.de>
20429 Date: Tue Aug 19 10:08:49 2008 +0200
20431 Add support for muas3001 board (MPC8270)
20433 Signed-off-by: Heiko Schocher <hs@denx.de>
20435 commit 322098bff32410d2a00031649b47c4ec90a66d9a
20436 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
20437 Date: Tue Aug 19 08:31:18 2008 +0530
20439 common/cmd_load.c cleanup - remove unused variables
20441 - Remove unused global variable os_data_count.
20442 - Remove unused variable z.
20444 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
20446 commit 306620b762a4f9fa6678568ad2e8772dec145208
20447 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
20448 Date: Mon Aug 18 13:35:27 2008 +0200
20452 MVS1 board has reached end-of-life and can be removed completely.
20454 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
20456 commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
20457 Author: Kumar Gala <galak@kernel.crashing.org>
20458 Date: Fri Aug 15 08:24:45 2008 -0500
20460 bootm: refactor do_reset and os boot function args
20462 There is no need for each OS specific function to call do_reset() we
20463 can just do it once in bootm. This means its feasible on an error for
20464 the OS boot function to return.
20466 Also, remove passing in cmd_tbl_t as its not needed by the OS boot
20467 functions. flag isn't currently used but might be in the future so
20470 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20472 commit 40afac22a9c602e55c501c800f1c064324711b56
20473 Author: Kumar Gala <galak@kernel.crashing.org>
20474 Date: Fri Aug 15 08:24:44 2008 -0500
20476 fdt: Added resize command
20478 Resize the fdt to size + padding to 4k boundary
20480 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20482 commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
20483 Author: Kumar Gala <galak@kernel.crashing.org>
20484 Date: Fri Aug 15 08:24:43 2008 -0500
20486 fdt: refactor initrd related code
20488 Created a new fdt_initrd() to deal with setting the initrd properties
20489 in the device tree and fixing up the mem reserve. We can use this
20490 both in the choosen node handling and lets us remove some duplicated
20491 code when we fixup the initrd info in bootm on PPC.
20493 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20495 commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
20496 Author: Kumar Gala <galak@kernel.crashing.org>
20497 Date: Fri Aug 15 08:24:42 2008 -0500
20499 fdt: refactor fdt resize code
20501 Move the fdt resizing code out of ppc specific boot code and into
20502 common fdt support code.
20504 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20506 commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
20507 Author: Kumar Gala <galak@kernel.crashing.org>
20508 Date: Fri Aug 15 08:24:41 2008 -0500
20510 bootm: refactor image detection and os load steps
20512 Created a bootm_start() that handles the parsing and detection of all
20513 the images that will be used by the bootm command (OS, ramdisk, fdt).
20514 As part of this we now tract all the relevant image offsets in the
20515 bootm_headers_t struct. This will allow us to have all the needed
20516 state for future sub-commands and lets us reduce a bit of arch
20517 specific code on SPARC.
20519 Created a bootm_load_os() that deals with decompression and loading
20522 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20524 commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
20525 Author: Kumar Gala <galak@kernel.crashing.org>
20526 Date: Fri Aug 15 08:24:40 2008 -0500
20528 bootm: move lmb into the bootm_headers_t structure
20530 To allow for persistent state between future bootm subcommands we
20531 need the lmb to exist in a global state.
20532 Moving it into the bootm_headers_t allows us to do that.
20534 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20536 commit 54f9c86691309b2f919f567f9255b8bcad2c7651
20537 Author: Kumar Gala <galak@kernel.crashing.org>
20538 Date: Fri Aug 15 08:24:39 2008 -0500
20540 bootm: Set working fdt address as part of the bootm flow
20542 Set the fdt working address so "fdt FOO" commands can be used as part
20543 of the bootm flow. Also set an the environment variable "fdtaddr"
20546 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20548 commit 06a09918f3903450313e2047a9cc258bf5872f46
20549 Author: Kumar Gala <galak@kernel.crashing.org>
20550 Date: Fri Aug 15 08:24:38 2008 -0500
20552 bootm: refactor fdt locating and relocation code
20554 Move the code that handles finding a device tree blob and relocating
20555 it (if needed) into common code so all arch's have access to it.
20557 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20559 commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
20560 Author: Kumar Gala <galak@kernel.crashing.org>
20561 Date: Fri Aug 15 08:24:37 2008 -0500
20563 bootm: refactor ramdisk locating code
20565 Move determing if we have a ramdisk and where its located into the
20566 common code. Keep track of the ramdisk start and end in the
20567 bootm_headers_t image struct.
20569 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20571 commit c160a9544743e80e8889edb2275538e7764ce334
20572 Author: Kumar Gala <galak@kernel.crashing.org>
20573 Date: Fri Aug 15 08:24:36 2008 -0500
20575 bootm: refactor entry point code
20577 Move entry point code out of each arch and into common code.
20578 Keep the entry point in the bootm_headers_t images struct.
20580 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20582 commit 20220d22b9f41446288588cd2e457e0077a18bed
20583 Author: Randy Vinson <rvinson@mvista.com>
20584 Date: Wed Aug 13 11:44:57 2008 -0700
20586 mpc7448hpc2: Fix PCI I/O space mapping.
20588 PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
20589 PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
20590 space such that 0xFA000000 in the processor's address space maps to 0
20591 on the PCI I/O bus.
20593 Signed-off-by Randy Vinson <rvinson@mvista.com>
20594 Acked-by: Roy Zang <tie-fei.zang@freescale.com>
20596 commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
20597 Author: Guennadi Liakhovetski <lg@denx.de>
20598 Date: Wed Aug 13 18:10:26 2008 +0200
20600 i.MX31: Specify maintainers for i.MX31-based boards
20602 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
20603 Signed-off-by: Wolfgang Denk <wd@denx.de>
20605 commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
20606 Author: Wolfgang Denk <wd@denx.de>
20607 Date: Tue Aug 26 15:01:28 2008 +0200
20609 ADS5121: adjust image addresses in RAM and flash
20611 Use the same mapping in flash as used by Linux
20613 Signed-off-by: Wolfgang Denk <wd@denx.de>
20615 commit 19f101412c16edee9fd55db4039e1d68a833b28b
20616 Author: Wolfgang Denk <wd@denx.de>
20617 Date: Tue Aug 26 13:14:34 2008 +0200
20619 cmd_mem.c: Fix help message alignment
20621 Bug was introced by "Big white-space cleanup" (53677ef1)
20623 Signed-off-by: Wolfgang Denk <wd@denx.de>
20625 commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
20626 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
20627 Date: Wed Aug 20 11:11:52 2008 +0200
20629 change mvBL-M7 default env and move to vendor subdir
20631 fix mvBL-M7 config and move to matrix_vision subdir
20633 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
20634 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20636 commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
20637 Author: Nick Spence <nick.spence@freescale.com>
20638 Date: Fri Aug 22 23:52:40 2008 -0700
20640 MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
20642 This patch adds elements to the 83xx sysconf structure and #define values that are used
20643 by mpc83xx family devices.
20645 Signed-off-by: Nick Spence <nick.spence@freescale.com>
20646 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20648 commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
20649 Author: Ira W. Snyder <iws@ovro.caltech.edu>
20650 Date: Fri Aug 22 11:00:15 2008 -0700
20652 MPC8349EMDS: Add PCI Agent (PCISLAVE) support
20654 Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
20655 PCI card rather than a host computer.
20657 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
20658 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20660 commit 4ff9aea9d6b5602683a920951ef896996438af62
20661 Author: Ira W. Snyder <iws@ovro.caltech.edu>
20662 Date: Fri Aug 22 11:00:14 2008 -0700
20664 mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
20666 This adds a helper function to unlock the PCI configuration bit, so that
20667 any extra PCI setup (such as outbound windows, etc.) can be done after
20668 using the 83XX_GENERIC_PCI code to set up the PCI bus.
20670 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
20671 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20673 commit 162338e1fcde231ca4d562e5ebd7859456731691
20674 Author: Ira W. Snyder <iws@ovro.caltech.edu>
20675 Date: Fri Aug 22 11:00:13 2008 -0700
20677 MPC8349EMDS: use 83XX_GENERIC_PCI setup code
20679 Change the MPC8349EMDS board to use the generic PCI initialization code
20680 for the mpc83xx cpu.
20682 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
20683 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20685 commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
20686 Author: Kim Phillips <kim.phillips@freescale.com>
20687 Date: Mon Aug 25 14:53:09 2008 -0500
20689 fix out of tree building
20691 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20693 commit a49d10cf027d059ee15c262010a05cdaec0961e1
20694 Author: Wolfgang Denk <wd@denx.de>
20695 Date: Mon Aug 25 23:45:41 2008 +0200
20697 Minor coding style cleanup, updte CHANGELOG
20699 Signed-off-by: Wolfgang Denk <wd@denx.de>
20701 commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
20702 Author: Stefan Roese <sr@denx.de>
20703 Date: Wed Aug 20 20:29:38 2008 +0200
20705 RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
20707 This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
20708 to combine both config options into one line. This even allows defining
20709 both options and not generating the target object twice.
20711 Signed-off-by: Stefan Roese <sr@denx.de>
20713 commit 079edb913dbae147b50a488cf02e03f473fc5f28
20714 Author: Jens Gehrlein <sew_s@tqs.de>
20715 Date: Fri Jul 4 16:50:05 2008 +0200
20717 MX31: fix bit masks in function mx31_decode_pll()
20719 Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
20721 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
20723 commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
20724 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
20725 Date: Mon Aug 25 11:11:34 2008 +0200
20727 Correct ARM Versatile Timer Initialization
20729 - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
20730 -- Timer Value Register @ TIMER Base + 4 is Read-only.
20731 -- Prescale Value (Bits 3-2 of TIMER Control register)
20732 can only be one of 00,01,10. 11 is undefined.
20733 -- CFG_HZ for Versatile board is set to
20734 #define CFG_HZ (1000000 / 256)
20735 So Prescale bits is set to indicate
20736 - 8 Stages of Prescale, Clock divided by 256
20737 - The Timer Control Register has one Undefined/Shouldn't Use Bit
20738 So we should do read/modify/write Operation
20740 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
20742 commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
20743 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
20744 Date: Mon Aug 25 11:30:29 2008 +0200
20746 Add ARM AMBA PL031 RTC Support
20748 Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
20750 commit e39411674669cc880e1ec4a8ca4794fb15c33a45
20751 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20752 Date: Tue Aug 19 16:21:03 2008 -0400
20754 ARM DaVinci: Removed redundant NAND initialization code.
20756 ARM DaVinci: Removed redundant NAND initialization code.
20758 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20760 commit b3fb663b20d995ca41327db877ddb168279b3f62
20761 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20762 Date: Tue Aug 19 16:21:00 2008 -0400
20764 ARM DaVinci: Fix compilation error with new MTD code.
20766 ARM DaVinci: Fix compilation error with new MTD code.
20768 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
20770 commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
20771 Author: Gerald Van Baren <vanbaren@cideas.com>
20772 Date: Fri Aug 22 14:37:05 2008 -0400
20774 Add note on dereferencing /aliases pointers
20776 Replace the "must quote special characters" note with a hint on
20777 how to dereference /aliases pointers by omitting the leading "/".
20778 This feature was introduced by Kumar Gala as a libfdt enhancement
20779 in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
20783 => fdt print /aliases
20785 ethernet0 = "/qe@e0100000/ucc@2000";
20786 ethernet1 = "/qe@e0100000/ucc@3000";
20787 serial0 = "/soc8360@e0000000/serial@4500";
20788 serial1 = "/soc8360@e0000000/serial@4600";
20789 pci0 = "/pci@e0008500";
20791 => fdt print ethernet0
20793 device_type = "network";
20794 compatible = "ucc_geth";
20795 cell-index = <0x1>;
20796 reg = <0x2000 0x200>;
20797 interrupts = <0x20>;
20798 interrupt-parent = <0x2>;
20799 local-mac-address = [00 00 00 00 00 00];
20800 rx-clock-name = "none";
20801 tx-clock-name = "clk9";
20802 phy-handle = <0x3>;
20803 phy-connection-type = "rgmii-id";
20804 pio-handle = <0x4>;
20807 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
20809 commit feeca3f578b7f53c032ba203698751c982f8bf5a
20810 Author: Kumar Gala <galak@kernel.crashing.org>
20811 Date: Thu Aug 14 08:28:19 2008 -0500
20813 libfdt: Add support for using aliases in fdt_path_offset()
20815 If the path doesn't start with '/' check to see if it matches some alias
20816 under "/aliases" and substitute the matching alias value in the path
20817 and retry the lookup.
20819 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20820 Acked-by: David Gibson <david@gibson.dropbear.id.au>
20821 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
20823 commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
20824 Author: David Gibson <david@gibson.dropbear.id.au>
20825 Date: Wed Aug 6 14:50:49 2008 +1000
20827 libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
20829 As well as fdt_subnode_offset(), libfdt includes an
20830 fdt_subnode_offset_namelen() function that takes the subnode name to
20831 look up not as a NUL-terminated string, but as a string with an
20832 explicit length. This can be useful when the caller has the name as
20833 part of a longer string, such as a full path.
20835 However, we don't have corresponding 'namelen' versions for
20836 fdt_get_property() and fdt_getprop(). There are less obvious use
20837 cases for these variants on property names, but there are
20838 circumstances where they can be useful e.g. looking up property names
20839 which need to be parsed from a longer string buffer such as user input
20840 or a configuration file, or looking up an alias in a path with
20841 IEEE1275 style aliases.
20843 So, since it's very easy to implement such variants, this patch does
20844 so. The original NUL-terminated variants are, of course, implemented
20845 in terms of the namelen versions.
20847 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
20849 commit f171746f701ea58bf6a53e835b53d2aaebee0d81
20850 Author: David Gibson <david@gibson.dropbear.id.au>
20851 Date: Tue Jul 29 14:51:22 2008 +1000
20853 libfdt: Forgot one function when cleaning the namespace
20855 In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
20856 libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
20857 chance of collisions with things from whatever package libfdt is
20858 embedded in, pulled into the libfdt build via that environment's
20861 Except... I missed one. This patch applies the same treatment to
20862 _stringlist_contains(). While we're at it, also make it static since
20863 it's only used in the same file.
20865 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
20867 commit 46390da15411351fc3b498bd8c1615f78fe80df0
20868 Author: Wolfram Sang <w.sang@pengutronix.de>
20869 Date: Wed Jul 9 11:22:44 2008 +0200
20871 libfdt: Improve documentation in libfdt.h
20873 Fix a few typos and mistakes.
20875 Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
20876 Acked-by: David Gibson <david@gibson.dropbear.id.au>
20878 commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
20879 Author: David Gibson <david@gibson.dropbear.id.au>
20880 Date: Wed Jul 9 14:10:24 2008 +1000
20882 libfdt: Increase namespace-pollution paranoia
20884 libfdt is supposed to easy to embed in projects all and sundry.
20885 Often, it won't be practical to separate the embedded libfdt's
20886 namespace from that of the surrounding project. Which means there can
20887 be namespace conflicts between even libfdt's internal/static functions
20888 and functions or macros coming from the surrounding project's headers
20891 This patch, therefore, renames a bunch of libfdt internal functions
20892 and macros and makes a few other chances to reduce the chances of
20893 namespace collisions with embedding projects. Specifically:
20894 - Internal functions (even static ones) are now named _fdt_*()
20896 - The type and (static) global for the error table in
20897 fdt_strerror() gain an fdt_ prefix
20899 - The unused macro PALIGN is removed
20901 - The memeq and streq macros are removed and open-coded in the
20902 users (they were only used once each)
20904 - Other macros gain an FDT_ prefix
20906 - To save some of the bulk from the previous change, an
20907 FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
20908 FDT_ALIGN(x, FDT_TAGSIZE)
20910 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
20912 commit c66830263af19831f2b7db307f79d1943febf7f9
20913 Author: David Gibson <david@gibson.dropbear.id.au>
20914 Date: Mon Jul 7 10:14:15 2008 +1000
20916 dtc: Enable and fix -Wcast-qual warnings
20918 Enabling -Wcast-qual warnings in dtc shows up a number of places where
20919 we are incorrectly discarding a const qualification. There are also
20920 some places where we are intentionally discarding the 'const', and we
20921 need an ugly cast through uintptr_t to suppress the warning. However,
20922 most of these are pretty well isolated with the *_w() functions. So
20923 in the interests of maximum safety with const qualifications, this
20924 patch enables the warnings and fixes the existing complaints.
20926 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
20927 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
20929 commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
20930 Author: David Gibson <david@gibson.dropbear.id.au>
20931 Date: Mon Jul 7 10:10:48 2008 +1000
20933 dtc: Enable and fix -Wpointer-arith warnings
20935 This patch turns on the -Wpointer-arith option in the dtc Makefile,
20936 and fixes the resulting warnings due to using (void *) in pointer
20937 arithmetic. While convenient, pointer arithmetic on void * is not
20938 portable, so it's better that we avoid it, particularly in libfdt.
20940 Also add necessary definition of uintptr_t needed by David Gibson's
20941 changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
20942 comes from stdint.h, which u-boot doesn't have). -- gvb
20944 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
20945 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
20947 commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
20948 Author: Tirumala R Marri <tmarri@amcc.com>
20949 Date: Thu Aug 21 21:54:53 2008 -0700
20951 ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
20953 During recent PCI-E tests it has been found that current
20954 driverl level and de-emphasis values are not set correctly.
20955 After sweeping throgh all de-ephasis values, it was found that
20956 0x130 is a right value. Where 0x13 is driver level and 0 is
20959 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
20960 Signed-off-by: Stefan Roese <sr@denx.de>
20962 commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
20963 Author: Remy Bohmer <linux@bohmer.net>
20964 Date: Wed Aug 20 20:46:56 2008 +0200
20966 Make the YAFFS filesystem work
20968 Recently the YAFFS filesystem support has been added to U-boot.
20969 However, just enabling CONFIG_YAFFS2 is not enough to get it working.
20971 ymount will generate an exception (when dereferencing mtd->readoob()), because
20972 the genericDevice is a null pointer. Further, a lot of logging is produced
20973 while using YAFFS fs, so logging should also be disabled.
20974 Both issues are solved by this patch.
20976 With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
20977 in U-boot, as well as in Linux.
20979 Tested on a Atmel AT91SAM9261EK board.
20981 Signed-off-by: Remy Bohmer <linux@bohmer.net>
20982 Acked-by: William Juul <william.juul@tandberg.com>
20983 Signed-off-by: Scott Wood <scottwood@freescale.com>
20985 commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
20986 Author: Kyungmin Park <kmpark@infradead.org>
20987 Date: Tue Aug 19 08:42:53 2008 +0900
20989 Fix OneNAND read_oob/write_oob functions compatability
20991 Also sync with kernel OneNAND codes
20993 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
20994 Signed-off-by: Scott Wood <scottwood@freescale.com>
20996 commit 8d765456c1d33f2010d2717ee58de7647fdc6346
20997 Author: Scott Wood <scottwood@freescale.com>
20998 Date: Mon Aug 18 17:11:20 2008 -0500
21000 NAND: Remove delay from nand_boot_fsl_elbc.c.
21002 It was for debugging purposes, and shouldn't have been left in.
21004 Signed-off-by: Scott Wood <scottwood@freescale.com>
21006 commit f556483734126793522fb7a8cf36af90da78f084
21007 Author: Stefan Roese <sr@denx.de>
21008 Date: Thu Aug 21 11:05:03 2008 +0200
21010 ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
21012 This patch fixes some minor issues introduced with the patch:
21013 ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
21015 - Rework memory-queue and PLB arbiter optimization code, that the
21016 local variable is not needed anymore. This removes one #ifdef.
21017 - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
21018 of XXX+ 0x01). This was not introduced by Prodyut, just a
21019 copy-paste problem.
21021 Signed-off-by: Stefan Roese <sr@denx.de>
21023 commit 079589bcfb24ba11068460276a3cc9549ab5346f
21024 Author: Prodyut Hazarika <phazarika@amcc.com>
21025 Date: Wed Aug 20 09:38:51 2008 -0700
21027 ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
21028 PPC405EX and PPC460EX/GT/SX
21030 - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
21032 - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
21033 across processors (405 and 440/460)
21034 - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
21036 - Add register bit definitions for Memory Queue Configuration registers
21038 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
21039 Signed-off-by: Stefan Roese <sr@denx.de>
21041 commit ba37aa03287c5483c61c0a3e320c8888bee0143a
21042 Author: Kumar Gala <galak@kernel.crashing.org>
21043 Date: Tue Aug 19 15:41:18 2008 -0500
21045 fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
21047 Move to using the environment variables 'ethaddr', 'eth1addr', etc..
21048 instead of bd->bi_enetaddr, bi_enet1addr, etc.
21050 This makes the code a bit more flexible to the number of ethernet
21053 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21055 commit 4cacf7c64609839f809e2f9c45873f1d65861703
21056 Author: Stefan Roese <sr@denx.de>
21057 Date: Tue Aug 19 14:57:55 2008 +0200
21059 hush: Fix printf debug macro in hush.c so that it usable in U-Boot
21061 This patch changes the debug_printf() marco for U-Boot in hush.c and
21062 moves the definition of DEBUG_SHELL to a place that is actually compiled
21065 Signed-off-by: Stefan Roese <sr@denx.de>
21067 commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
21068 Author: Heiko Schocher <hs@denx.de>
21069 Date: Tue Aug 19 09:57:41 2008 +0200
21071 cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
21073 Commit 00b1883a4cac59d97cd297b1a3a398db85982865
21074 missed a few boards:
21075 include/configs/M5253DEMO.h
21076 include/configs/ml507.h
21077 include/configs/redwood.h
21079 This patch fixes this.
21081 Signed-off-by: Heiko Schocher <hs@denx.de>
21083 commit 0768b7a872964085eece8d5e9fec9175e9deb161
21084 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21085 Date: Mon Aug 18 13:41:27 2008 +0200
21087 Consolidate strmhz() implementation
21089 ARM, i386, m68k and ppc all have identical implementations of strmhz().
21090 Other architectures don't provide this function at all.
21092 This patch moves strmhz() into lib_generic, reducing code duplication
21093 and providing a more unified API across architectures.
21095 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21097 commit a928d0df211f1d829308d335d19be3ca42558dfc
21098 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
21099 Date: Mon Aug 18 12:02:51 2008 +0200
21101 fix mvbc_p board build warnings
21103 fix build warnings @ mvBC-P board by using correct types, i.e. change
21104 out_be32 to out_be16 and out_8 accordingly.
21106 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
21108 commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
21109 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21110 Date: Sat Aug 16 18:54:27 2008 +0200
21112 Makefile: fix posix support on find
21114 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21116 commit bef92e215d945cc574399c1a1b00a3a76d35aa03
21117 Author: Axel Beierlein <belatronix@web.de>
21118 Date: Sat Aug 16 00:30:48 2008 +0200
21120 Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
21122 Tested with TQM5200S on STK52XX.200 Board
21124 Signed-off-by: Axel Beierlein <belatronix@web.de>
21126 commit 0800707b6d5041a840a65d556032c15c584b55f8
21127 Author: Peter Tyser <ptyser@xes-inc.com>
21128 Date: Fri Aug 15 14:36:32 2008 -0500
21130 mod_i2c_mem() bugfix
21132 The last used chip, address, and address length were not being
21133 stored for the imm and imn commands.
21135 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
21137 commit 4afbef967275b2f636abae86f91b81becee7ad03
21138 Author: Steven A. Falco <sfalco@harris.com>
21139 Date: Fri Aug 15 15:37:31 2008 -0400
21141 Fix typo in spelling of ATAPI.
21143 Correct a small spelling mistake.
21145 Signed-off-by: Steven A. Falco <sfalco@harris.com>
21147 commit 36c2d3062ecc6ab85f8e237180eb134464c48418
21148 Author: Steven A. Falco <sfalco@harris.com>
21149 Date: Fri Aug 15 15:34:10 2008 -0400
21151 Add a hook to allow board-specific PIO mode setting.
21153 This patch adds a hook whereby a board-specific routine can be called to
21154 configure hardware for a PIO mode. The prototype for the board-specific
21157 int inline ide_set_piomode(int pio_mode)
21159 ide_set_piomode should be prepared to configure hardware for a pio_mode
21160 between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
21162 Signed-off-by: Steven A. Falco <sfalco@harris.com>
21164 commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
21165 Author: Steven A. Falco <sfalco@harris.com>
21166 Date: Fri Aug 15 15:29:12 2008 -0400
21168 Replace enums in ata.h with an include of libata.h
21170 This patch removes some enums from ata.h and replaces them with an
21171 include of libata.h. This way, we eliminate duplicated code, and
21172 prevent errors whereby the different versions could be out of sync.
21174 Signed-off-by: Steven A. Falco <sfalco@harris.com>
21176 commit 0de0afbca865ecf482b4d2b635236746def8518f
21177 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21178 Date: Fri Aug 15 18:32:41 2008 +0200
21180 coldfire: fix CFI drivers activation with new macro
21182 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
21184 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21186 commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
21187 Author: Kumar Gala <galak@kernel.crashing.org>
21188 Date: Fri Aug 15 08:24:35 2008 -0500
21190 fdt: fdt addr w/o any args reports back the current working address
21192 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21194 commit f953d99fd528a496b400a706b511eaf8e3ea66af
21195 Author: Kumar Gala <galak@kernel.crashing.org>
21196 Date: Fri Aug 15 08:24:34 2008 -0500
21198 fdt: added the ability to set initrd start/end via chosen command
21200 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21202 commit ffa4bafacaef67058463b3d7d0099ced57569dd2
21203 Author: Kumar Gala <galak@kernel.crashing.org>
21204 Date: Fri Aug 15 08:24:33 2008 -0500
21206 Add command to enable/disable interrupts
21208 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21210 commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
21211 Author: Nick Spence <nick.spence@freescale.com>
21212 Date: Tue Aug 19 22:21:16 2008 -0700
21214 CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
21216 This patch fixes a missing vendor code in the flash_real_protect() function.
21218 Signed-off-by: Nick Spence <nick.spence@freescale.com>
21219 Signed-off-by: Stefan Roese <sr@denx.de>
21221 commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
21222 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21223 Date: Tue Aug 19 16:53:39 2008 +0000
21225 CFI: Fix AMD Legacy sector protect
21227 New implement sector lock and unlock or softlock commands
21228 do not exist in AMD legacy flash. Thus, causing issue
21229 when erasing AMD legacy flash (such as lv040)
21231 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21232 Signed-off-by: Stefan Roese <sr@denx.de>
21234 commit 492671404140f09d5b21b3d2ce4e362c0692c069
21235 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21236 Date: Wed Aug 20 09:40:16 2008 +0200
21238 hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
21240 CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
21242 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21244 commit 33eac2b3d946fc998a09245dfe54d017079b9056
21245 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21246 Date: Wed Aug 20 09:28:36 2008 +0200
21248 hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
21250 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21252 commit 25da0b84195fdda89a943b2d25757db5afeef5b8
21253 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21254 Date: Wed Aug 20 09:27:37 2008 +0200
21256 favr-32-ezkit: Fix printf format warnings
21258 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21260 commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
21261 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21262 Date: Fri Aug 15 12:04:25 2008 +0200
21264 MAINTAINERS: Sort avr32 section alphabetically
21266 The rest of the MAINTAINERS file appears to be sorted
21267 almost-alphabetically, but entries for the newly added AVR32 boards were
21268 added somewhat randomly. This patch sorts the list alphabetically again.
21270 Also update my e-mail address. The old one still works, but it may not
21273 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21275 commit 13b50fe3bc065c48911fa373231421280855a9d6
21276 Author: Mark Jackson <mpfj@mimc.co.uk>
21277 Date: Wed Jul 30 13:07:27 2008 +0100
21279 avr32: Add MIMC200 board
21281 The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
21282 8MByte FLASH and 128KByte FRAM.
21284 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
21285 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
21287 commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
21288 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
21289 Date: Wed Jul 9 21:07:34 2008 +0900
21291 rtl8169: add support for RTL8110SCL
21293 This patch fixes a problem that RTL8110SCL started transfer
21294 with an incorrect memory address.
21296 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
21297 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21299 commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
21300 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21301 Date: Wed Jun 25 15:48:52 2008 -0500
21303 Fix dm9000 receive status and len little endian issue
21305 The received status and len was in little endian
21306 format and caused the ethernet unable to proceed
21307 further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
21309 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21310 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
21312 commit fcd69a1a57fb2af4d26201422095a4be9f36963e
21313 Author: Kumar Gala <galak@kernel.crashing.org>
21314 Date: Fri Aug 15 08:24:32 2008 -0500
21316 Clean up usage of icache_disable/dcache_disable
21318 There is no point in disabling the icache on 7xx/74xx/86xx parts and not
21319 also flushing the icache. All callers of invalidate_l1_instruction_cache()
21320 call icache_disable() right after. Make it so icache_disable() calls
21321 invalidate_l1_instruction_cache() for us.
21323 Also, dcache_disable() already calls dcache_flush() so there is no point
21324 in the explicit calls of dcache_flush().
21326 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21328 commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
21329 Author: Kumar Gala <galak@kernel.crashing.org>
21330 Date: Fri Aug 15 08:24:31 2008 -0500
21332 Update linux bootm to support ePAPR client interface
21334 The ePAPR spec has some subtle differences from the current device
21335 tree based boot interface to the powerpc linux kernel. The powerpc
21336 linux kernel currently ignores the differences that ePAPR specifies.
21338 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21340 commit b734e5556a239b3be5f9693b2f4b4b739683ec16
21341 Author: Wolfgang Denk <wd@denx.de>
21342 Date: Mon Aug 18 23:50:20 2008 +0200
21344 Minor code cleanup: keep lists sorted.
21346 Signed-off-by: Wolfgang Denk <wd@denx.de>
21348 commit d0039d4ed275e6ca09fb417895024ad02be118c4
21349 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
21350 Date: Wed Jul 23 19:10:14 2008 +0200
21352 Add support for ADT7460 I2C monitor chip
21354 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
21356 commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
21357 Author: Michal Simek <monstr@monstr.eu>
21358 Date: Mon Jul 14 19:45:45 2008 +0200
21360 video: Clean drivers/video/Makefile
21362 Signed-off-by: Michal Simek <monstr@monstr.eu>
21364 commit 871c18dd301752270e1f74328c846c3104be1e2e
21365 Author: Michal Simek <monstr@monstr.eu>
21366 Date: Mon Jul 14 19:45:37 2008 +0200
21368 rtc: Clean drivers/rtc/Makefile
21370 Signed-off-by: Michal Simek <monstr@monstr.eu>
21372 commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
21373 Author: Michal Simek <monstr@monstr.eu>
21374 Date: Mon Jul 14 19:45:35 2008 +0200
21376 i2c: Clean drivers/i2c/ Makefile
21378 Signed-off-by: Michal Simek <monstr@monstr.eu>
21380 commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
21381 Author: Harald Welte <laforge@openmoko.org>
21382 Date: Wed Jul 9 22:30:30 2008 +0800
21384 Add 'license' command to U-Boot command line
21386 The 'license' command includes the U-Boot license (GPLv2) into the
21387 actual bootloader binary. The license text can be shown interactively
21388 at the U-Boot commandline.
21390 For products where the commandline can actually be accessed by the
21391 end user, this helps to prevent inadvertent GPL violations, since the
21392 GPLv2 license text can no longer be 'forgotten' to be included into
21395 The 'license' command can be enabled by CONFIG_CMD_LICENSE.
21397 Signed-off-by: Harald Welte <laforge@openmoko.org>
21399 commit fe2ce5500ebf43d79d227190bd2370232d5b113d
21400 Author: Harald Welte <laforge@gnumonks.org>
21401 Date: Sun Jul 6 15:56:38 2008 +0800
21403 add 'unzip' command to u-boot commandline
21405 [PATCH] add new 'unzip' command to u-boot commandline
21407 common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
21408 memory to memory, and option CONFIG_CMD_UNZIP to enable it
21410 Signed-off-by: Werner Almesberger <werner@openmoko.org>
21411 Signed-off-by: Harald Welte <laforge@openmoko.org>
21413 commit 07efc9e321619c3dec213310c32e011aa6f02783
21414 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21415 Date: Wed Aug 6 19:37:17 2008 -0500
21417 Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
21419 The CFG_ENV_SIZE is not suitable used for SPI flash erase
21420 sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
21421 Add condition check if CFG_ENV_SIZE is larger than
21422 CFG_ENV_SECT_SIZE, calculate the right number of sectors for
21425 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21427 commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
21428 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21429 Date: Mon Aug 11 15:54:25 2008 +0000
21431 ColdFire: Multiple fixes for M5282EVB
21433 Incorrect CFG_HZ value, change 1000000 to 1000.
21434 Rename #waring to #warning. RAMBAR1 uses twice
21435 in start.S, rename the later to FLASHBAR. Insert
21436 nop for DRAM setup. And, env_offset in linker file.
21438 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21440 commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
21441 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21442 Date: Mon Aug 11 15:26:43 2008 +0000
21444 ColdFire: Move m5282evb from board to board/freescale
21446 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21448 commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
21449 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21450 Date: Mon Aug 11 15:25:07 2008 +0000
21452 ColdFire: Move m5272c3 from board to board/freescale
21454 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21456 commit 659e9bad629a480f606b286d5703aef7159edf98
21457 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21458 Date: Mon Aug 11 15:23:16 2008 +0000
21460 ColdFire: Move m5271evb from board to board/freescale
21462 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21464 commit 05316f8ece8206339a208ec052f039cd0f7ca922
21465 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21466 Date: Mon Aug 11 13:41:49 2008 +0000
21468 ColdFire: Add M54451EVB platform support for MCF5445x
21470 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21472 commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
21473 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21474 Date: Wed Aug 6 19:14:08 2008 -0500
21476 ColdFire: Add Serial Flash support for M54455EVB
21478 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21480 commit 9f751551456828b2d0ff417f10959fb0c7110bd0
21481 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21482 Date: Wed Jul 23 20:38:53 2008 -0500
21484 ColdFire: Implement SBF feature for M5445EVB
21486 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21488 commit a7323bba229203aae2604afde131ab47bad4eadc
21489 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21490 Date: Wed Jul 23 17:53:36 2008 -0500
21492 ColdFire: Add SSPI feature for MCF5445x
21494 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21496 commit b2d022d1ac3f59bffa9cec249341e77aea168abc
21497 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21498 Date: Wed Jul 23 17:37:10 2008 -0500
21500 ColdFire: Use CFI Flash driver for M54455EVB
21502 Remove non-common flash driver in
21503 board/freescale/m54455evb/flash.c. The non-cfi flash will
21504 use CONFIG_FLASH_CFI_LEGACY to configure the flash
21507 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21509 commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
21510 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21511 Date: Wed Jul 23 17:11:47 2008 -0500
21513 ColdFire: Add M5253DEMO platform support for MCF5253
21515 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21517 commit 80ba61fd82569af40e04d4a089257b81881884f2
21518 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21519 Date: Wed Aug 6 14:17:09 2008 -0500
21521 ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
21523 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21525 commit d361307e73ce1f6fc68760123f37d4876f851f3e
21526 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21527 Date: Wed Aug 6 14:11:36 2008 -0500
21529 ColdFire: Fix M5253EVB dram bring up issue
21531 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21533 commit 4b0708093e15b412296328bf81325cf9b69fe512
21534 Author: Wolfgang Denk <wd@denx.de>
21535 Date: Thu Aug 14 14:41:06 2008 +0200
21537 Coding Style cleanup, update CHANGELOG
21539 Signed-off-by: Wolfgang Denk <wd@denx.de>
21541 commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
21542 Author: Scott Wood <scottwood@freescale.com>
21543 Date: Wed Aug 13 18:24:05 2008 -0500
21545 socrates: Update NAND driver to new API.
21547 Also, fix some minor formatting issues, and simplify the handling of
21548 "state" for writes.
21550 Signed-off-by: Scott Wood <scottwood@freescale.com>
21552 commit ba22d10f39eaeedd035e8265616e31ff88e314d5
21553 Author: Scott Wood <scottwood@freescale.com>
21554 Date: Wed Aug 13 18:03:40 2008 -0500
21556 quad100hd: Update NAND driver to new API.
21558 Signed-off-by: Scott Wood <scottwood@freescale.com>
21560 commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
21561 Author: Scott Wood <scottwood@freescale.com>
21562 Date: Wed Aug 13 17:53:48 2008 -0500
21564 m5373evb: Update NAND driver to new API.
21566 Signed-off-by: Scott Wood <scottwood@freescale.com>
21568 commit 1a23a197c8722b805f40895544bbdb1a648c1c82
21569 Author: Scott Wood <scottwood@freescale.com>
21570 Date: Wed Aug 13 17:04:30 2008 -0500
21572 s3c24x0: Update NAND driver to new API.
21574 Signed-off-by: Scott Wood <scottwood@freescale.com>
21576 commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
21577 Author: Scott Wood <scottwood@freescale.com>
21578 Date: Wed Aug 13 15:56:00 2008 -0500
21580 at91: Update board NAND drivers to current API.
21582 Signed-off-by: Scott Wood <scottwood@freescale.com>
21584 commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
21585 Author: Kyungmin Park <kmpark@infradead.org>
21586 Date: Wed Aug 13 09:11:02 2008 +0900
21588 Fix OneNAND build break
21590 Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
21591 - fix bufferram management at erase operation
21592 This patch includes the NAND/OneNAND state filed too.
21594 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21595 Signed-off-by: Scott Wood <scottwood@freescale.com>
21597 commit 9483df6408c25f16060432de3868901e352e23bc
21598 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21599 Date: Wed Aug 13 01:40:43 2008 +0200
21601 drivers/mtd/nand_legacy: Move conditional compilation to Makefile
21603 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21605 commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
21606 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21607 Date: Wed Aug 13 01:40:43 2008 +0200
21609 drivers/mtd/nand: Move conditional compilation to Makefile
21611 rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
21613 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21615 commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
21616 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21617 Date: Wed Aug 13 01:40:42 2008 +0200
21619 drivers/mtd/onenand: Move conditional compilation to Makefile
21621 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21623 commit 00b1883a4cac59d97cd297b1a3a398db85982865
21624 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21625 Date: Wed Aug 13 01:40:42 2008 +0200
21627 drivers/mtd: Move conditional compilation to Makefile
21629 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
21631 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21633 commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
21634 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21635 Date: Wed Aug 13 01:40:41 2008 +0200
21637 drivers/qe: Move conditional compilation to Makefile
21639 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21641 commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
21642 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21643 Date: Wed Aug 13 01:40:40 2008 +0200
21645 drivers/pci: Move conditional compilation to Makefile
21647 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21649 commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
21650 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21651 Date: Wed Aug 13 01:40:40 2008 +0200
21653 drivers/misc: Move conditional compilation to Makefile
21655 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21657 commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
21658 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21659 Date: Wed Aug 13 01:40:40 2008 +0200
21661 drivers/input: Move conditional compilation to Makefile
21663 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21665 commit 88f57e093114a44aa9a858d52b099bcc52034a8c
21666 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21667 Date: Wed Aug 13 01:40:39 2008 +0200
21669 drivers/dma: Move conditional compilation to Makefile
21671 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21673 commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
21674 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21675 Date: Wed Aug 13 01:40:39 2008 +0200
21677 drivers/block: Move conditional compilation to Makefile
21679 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21681 commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
21682 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21683 Date: Wed Aug 13 01:40:39 2008 +0200
21685 serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
21687 move also conditional compilation to Makefile
21689 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21691 commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
21692 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21693 Date: Wed Aug 13 01:40:38 2008 +0200
21695 serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
21697 move also conditional compilation to Makefile
21699 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21701 commit d6e9ee92e890f67594ab150689510df361133ead
21702 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21703 Date: Wed Aug 13 01:40:38 2008 +0200
21705 common: Move conditional compilation to Makefile
21707 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21709 commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
21710 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21711 Date: Wed Aug 13 01:40:09 2008 +0200
21713 mx31: move freescale's mx31 boards to vendor board dir
21715 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21717 commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
21718 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21719 Date: Sat Jul 5 23:11:11 2008 +0200
21721 at91: move arch-at91sam9 to arch-at91
21723 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21725 commit 195ccfc5991d48764b2519941e3507f693851d5d
21726 Author: Fathi BOUDRA <fabo@debian.org>
21727 Date: Wed Aug 6 10:06:20 2008 +0200
21729 OneNAND: Fill in MTD function pointers for OneNAND.
21731 onenand_print_device_info():
21732 - Now returns a string to be placed in mtd->name,
21733 rather than calling printf.
21734 - Remove verbose parameter as it becomes useless.
21736 Signed-off-by: Fathi Boudra <fabo@debian.org>
21737 Signed-off-by: Scott Wood <scottwood@freescale.com>
21739 commit aa646643b6bc250cb3a4966bf728876e0c10d329
21740 Author: Guennadi Liakhovetski <lg@denx.de>
21741 Date: Wed Aug 6 21:42:07 2008 +0200
21743 nand_spl: Support page-aligned read in nand_load, use chipselect
21745 Supporting page-aligned reads doesn't incure any sinificant overhead, just
21746 a small change in the algorithm. Also replace in_8 with readb, since there
21749 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21750 Signed-off-by: Scott Wood <scottwood@freescale.com>
21752 commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
21753 Author: Scott Wood <scottwood@freescale.com>
21754 Date: Tue Aug 5 11:15:59 2008 -0500
21756 NAND boot: Update large page support for current API.
21758 Also, remove the ctrl variable in favor of passing the constants
21759 directly, and remove redundant (u8) casts.
21761 Signed-off-by: Scott Wood <scottwood@freescale.com>
21763 commit e4c09508545d1c45617ba45391c03c03cbc360b9
21764 Author: Scott Wood <scottwood@freescale.com>
21765 Date: Mon Jun 30 14:13:28 2008 -0500
21767 NAND boot: MPC8313ERDB support
21769 Note that with older board revisions, NAND boot may only work after a
21770 power-on reset, and not after a warm reset. I don't have a newer board
21771 to test on; if you have a board with a 33MHz crystal, please let me know
21772 if it works after a warm reset.
21774 Signed-off-by: Scott Wood <scottwood@freescale.com>
21776 commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
21777 Author: Scott Wood <scottwood@freescale.com>
21778 Date: Thu Jun 26 14:06:52 2008 -0500
21780 mpc8313erdb: Enable NAND in config.
21782 Signed-off-by: Scott Wood <scottwood@freescale.com>
21784 commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
21785 Author: Guennadi Liakhovetski <lg@denx.de>
21786 Date: Thu Jul 31 12:38:26 2008 +0200
21788 NAND: Do not write or read a whole block if it is larger than the environment
21790 Environment can be smaller than NAND block size, do not need to read a whole
21791 block and minimum for writing is one page. Also remove an unused variable.
21793 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
21794 Signed-off-by: Scott Wood <scottwood@freescale.com>
21796 commit eafcabd15f00c142156235c519fcc55b10993241
21797 Author: Marcel Ziswiler <marcel@ziswiler.com>
21798 Date: Sun Jun 22 16:30:06 2008 +0200
21800 NAND: chip->state does not always get set.
21802 Fixes an issue with chip->state not always being set causing troubles.
21804 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
21805 Signed-off-by: Scott Wood <scottwood@freescale.com>
21807 commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
21808 Author: Ilya Yanok <yanok@emcraft.com>
21809 Date: Mon Jun 30 15:34:40 2008 +0200
21811 NAND: Scan bad blocks lazily.
21813 Rather than scanning on boot, scan upon the first attempt to check the
21814 badness of a block. This speeds up boot when not using NAND, and reduces
21815 the likelihood of needing to reflash via JTAG if NAND becomes
21818 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
21819 Signed-off-by: Scott Wood <scottwood@freescale.com>
21821 commit dfbf617ff055e4216f78d358b0867c548916d14b
21822 Author: Scott Wood <scottwood@freescale.com>
21823 Date: Thu Jun 12 13:20:16 2008 -0500
21825 NAND read/write fix
21827 Implement block-skipping read/write, based on a patch from
21828 Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
21830 Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
21831 Signed-off-by: Scott Wood <scottwood@freescale.com>
21833 commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
21834 Author: Scott Wood <scottwood@freescale.com>
21835 Date: Thu Jun 12 13:13:23 2008 -0500
21837 NAND: Always skip blocks on read/write/boot.
21839 Use of the non-skipping versions was almost always (if not always)
21840 an error, and no valid use case has been identified.
21842 Signed-off-by: Scott Wood <scottwood@freescale.com>
21844 commit e1c3dbada349992875934575c97b328ab2cb33ca
21845 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
21846 Date: Thu Jun 12 11:10:21 2008 -0500
21848 nand: fsl_upm: convert to updated MTD NAND infrastructure
21850 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
21851 Signed-off-by: Scott Wood <scottwood@freescale.com>
21853 commit 300253306acc72b1b2e9faf0987f86551151d7cf
21854 Author: Scott Wood <scottwood@freescale.com>
21855 Date: Thu May 22 15:02:46 2008 -0500
21857 fsl_elbc_nand: Hard-code the FBAR/FPAR split.
21859 The hardware has separate registers for block and page-within-block,
21860 but the division between the two has no apparent relation to the
21861 actual erase block size of the NAND chip.
21863 Signed-off-by: Scott Wood <scottwood@freescale.com>
21865 commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
21866 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
21867 Date: Fri Mar 28 22:10:54 2008 +0300
21869 fsl_elbc_nand: workaround for hangs during nand write
21871 Using current driver elbc sometimes hangs during nand write. Reading back
21872 last byte helps though (thanks to Scott Wood for the idea).
21874 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
21875 Signed-off-by: Scott Wood <scottwood@freescale.com>
21877 commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
21878 Author: Scott Wood <scottwood@freescale.com>
21879 Date: Fri Mar 21 16:12:51 2008 -0500
21881 Freescale eLBC FCM NAND driver
21883 This is a driver for the Flash Control Machine of the enhanched Local Bus
21884 Controller found on some Freescale chips (such as the mpc8313 and the
21887 Signed-off-by: Scott Wood <scottwood@freescale.com>
21889 commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
21890 Author: Scott Wood <scottwood@freescale.com>
21891 Date: Tue Mar 18 15:29:14 2008 -0500
21893 Don't panic if a controller driver does ecc its own way.
21895 Some hardware, such as the enhanced local bus controller used on some
21896 mpc83xx chips, does ecc transparently when reading and writing data, rather
21897 than providing a generic calculate/correct mechanism that can be exported to
21898 the nand subsystem.
21900 The subsystem should not BUG() when calculate, correct, or hwctl are
21901 missing, if the methods that call them have been overridden.
21903 Signed-off-by: Scott Wood <scottwood@freescale.com>
21905 commit e52b34d40a8a646e3d11638ea8797e96398dba13
21906 Author: Stefan Roese <sr@denx.de>
21907 Date: Thu Jan 10 18:47:33 2008 +0100
21909 NAND: Make NAND driver less verbose per default
21911 This patch turns off printing of bad blocks per default upon bootup.
21912 This can always be shown via the "nand bad" command later.
21914 Signed-off-by: Stefan Roese <sr@denx.de>
21916 commit fe56a2772e5c59577df906163d0d4b29b056140e
21917 Author: Sergey Kubushyn <ksi@koi8.net>
21918 Date: Wed Jan 9 15:36:20 2008 +0100
21920 NAND: Davinci driver updates
21922 Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
21923 don't have hardware handy so I can not test it at the moment but changes are
21924 rather trivial so it should work. It would be nice if somebody with a
21925 hardware checked it anyways.
21927 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
21929 commit deac913effd8d80535c9ff4687b6fcdff540c554
21930 Author: Stefan Roese <sr@denx.de>
21931 Date: Sat Jan 5 16:50:32 2008 +0100
21933 NAND: Fix compilation warning and small coding style issue
21935 Signed-off-by: Stefan Roese <sr@denx.de>
21937 commit c568f77acdf896fc3dd6413ce53205b17ba809a3
21938 Author: Stefan Roese <sr@denx.de>
21939 Date: Sat Jan 5 16:49:37 2008 +0100
21941 NAND: Update nand_spl driver to match updated nand subsystem
21943 This patch changes the NAND booting driver nand_spl/nand_boot.c to match
21944 the new infrastructure from the updated NAND subsystem. This NAND
21945 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
21948 Signed-off-by: Stefan Roese <sr@denx.de>
21950 commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
21951 Author: Stefan Roese <sr@denx.de>
21952 Date: Sat Jan 5 16:47:58 2008 +0100
21954 NAND: Update 4xx NDFC driver to match updated nand subsystem
21956 This patch changes the 4xx NAND driver ndfc.c to match the new
21957 infrastructure from the updated NAND subsystem. This NAND
21958 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
21961 Tested successfully on AMCC Sequoia and Bamboo.
21963 Signed-off-by: Stefan Roese <sr@denx.de>
21965 commit 12072264528eba33737bc9674e19f0e925ffda23
21966 Author: Stefan Roese <sr@denx.de>
21967 Date: Sat Jan 5 16:43:25 2008 +0100
21969 NAND: Change nand_wait_ready() to not call nand_wait()
21971 This patch changes nand_wait_ready() to not just call nand_wait(),
21972 since this will send a new command to the NAND chip. We just want to
21973 wait for the chip to become ready here.
21975 Signed-off-by: Stefan Roese <sr@denx.de>
21977 commit 9ad754fef5053144daed3b007adaf1c9bec654c9
21978 Author: William Juul <william.juul@datarespons.no>
21979 Date: Fri Dec 14 16:33:45 2007 +0100
21981 make nand dump and nand dump.oob work
21983 Signed-off-by: William Juul <william.juul@tandberg.com>
21984 Signed-off-by: Scott Wood <scottwood@freescale.com>
21986 commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
21987 Author: William Juul <william.juul@datarespons.no>
21988 Date: Mon Nov 19 14:46:00 2007 +0100
21990 moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
21992 Signed-off-by: William Juul <william.juul@tandberg.com>
21994 commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
21995 Author: William Juul <william.juul@tandberg.com>
21996 Date: Tue Jun 10 16:18:13 2008 -0500
21998 Clean out unneeded files
22000 Signed-off-by: William Juul <william.juul@tandberg.com>
22002 commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
22003 Author: William Juul <william.juul@datarespons.no>
22004 Date: Fri Nov 16 08:44:27 2007 +0100
22006 Create symlinks from yaffs2/direct to yaffs2
22008 Signed-off-by: William Juul <william.juul@tandberg.com>
22010 commit 90ef117b68387d66763291af0117677644166611
22011 Author: William Juul <william.juul@datarespons.no>
22012 Date: Thu Nov 15 12:23:57 2007 +0100
22014 Incorporate yaffs2 into U-boot
22016 To use YAFFS2 define CONFIG_YAFFS2
22018 Signed-off-by: William Juul <william.juul@tandberg.com>
22019 Signed-off-by: Scott Wood <scottwood@freescale.com>
22021 commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
22022 Author: William Juul <william.juul@datarespons.no>
22023 Date: Thu Nov 15 11:13:05 2007 +0100
22027 Direct import of yaffs as a tarball as of 20071113 from their public
22028 CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
22030 The code can also be imported on the command line with:
22031 export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
22032 (Hit return when asked for a password)
22033 cvs checkout yaffs2
22035 Signed-off-by: William Juul <william.juul@tandberg.com>
22036 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
22038 commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
22039 Author: William Juul <william.juul@datarespons.no>
22040 Date: Wed Nov 14 14:28:11 2007 +0100
22042 Whitespace cleanup and marking broken code.
22044 Changes requested by maintainer Stefan Roese after
22045 posting patch to U-boot mailing list.
22047 Signed-off-by: William Juul <william.juul@tandberg.com>
22048 Signed-off-by: Scott Wood <scottwood@freescale.com>
22050 commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
22051 Author: William Juul <william.juul@datarespons.no>
22052 Date: Fri Nov 9 13:32:30 2007 +0100
22054 Fixing coding style issues
22056 - Fixing leading white spaces
22057 - Fixing indentation where 4 spaces are used instead of tab
22058 - Removing C++ comments (//), wherever I introduced them
22060 Signed-off-by: William Juul <william.juul@tandberg.com>
22061 Signed-off-by: Scott Wood <scottwood@freescale.com>
22063 commit 4cbb651b29cb64d378a06729970e1e153bb605b1
22064 Author: William Juul <william.juul@datarespons.no>
22065 Date: Thu Nov 8 10:39:53 2007 +0100
22067 Remove white space at end.
22069 Signed-off-by: William Juul <william.juul@tandberg.com>
22070 Signed-off-by: Scott Wood <scottwood@freescale.com>
22072 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
22073 Author: William Juul <william.juul@datarespons.no>
22074 Date: Wed Oct 31 13:53:06 2007 +0100
22076 Update MTD to that of Linux 2.6.22.1
22078 A lot changed in the Linux MTD code, since it was last ported from
22079 Linux to U-Boot. This patch takes U-Boot NAND support to the level
22080 of Linux 2.6.22.1 and will enable support for very large NAND devices
22081 (4KB pages) and ease the compatibility between U-Boot and Linux
22084 This patch is tested on two custom boards with PPC and ARM
22085 processors running YAFFS in U-Boot and Linux using gcc-4.1.2
22088 MAKEALL ppc/arm has some issues:
22089 * DOC/OneNand/nand_spl is not building (I have not tried porting
22090 these parts, and since I do not have any HW and I am not familiar
22091 with this code/HW I think its best left to someone else.)
22093 Except for the issues mentioned above, I have ported all drivers
22094 necessary to run MAKEALL ppc/arm without errors and warnings. Many
22095 drivers were trivial to port, but some were not so trivial. The
22096 following drivers must be examined carefully and maybe rewritten to
22099 cpu/arm926ejs/davinci/nand.c
22101 board/zylonite/nand.c
22103 Signed-off-by: William Juul <william.juul@tandberg.com>
22104 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
22105 Signed-off-by: Scott Wood <scottwood@freescale.com>
22107 commit cd82919e6c8a73b363a26f34b734923844e52d1c
22108 Author: Wolfgang Denk <wd@denx.de>
22109 Date: Tue Aug 12 16:08:38 2008 +0200
22111 Coding style cleanup, update CHANGELOG, prepare release
22113 Signed-off-by: Wolfgang Denk <wd@denx.de>
22115 commit 17e900b8c0f38d922da47073246219dce2a847f2
22116 Author: Wolfgang Denk <wd@denx.de>
22117 Date: Tue Aug 12 14:54:04 2008 +0200
22119 MVBC_P: fix compile problem
22121 Signed-off-by: Wolfgang Denk <wd@denx.de>
22123 commit 52b047ae48219b59bebe37ba743ab103fd4f8316
22124 Author: Wolfgang Denk <wd@denx.de>
22125 Date: Tue Aug 12 12:10:11 2008 +0200
22127 MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
22129 Signed-off-by: Wolfgang Denk <wd@denx.de>
22131 commit c9c101c660b3d1995045c61c7c6041f52b6cf335
22132 Author: Wolfgang Denk <wd@denx.de>
22133 Date: Tue Aug 12 00:36:53 2008 +0200
22135 ads5121: fix compiler warnings (unused variables)
22137 Signed-off-by: Wolfgang Denk <wd@denx.de>
22139 commit 902ca09246039964d59bbcb519b1e1b5aed01308
22140 Author: Kumar Gala <galak@kernel.crashing.org>
22141 Date: Mon Aug 11 11:29:28 2008 -0500
22143 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
22145 Use CONFIG_NUM_CPUS to match existing define used by 86xx.
22147 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22148 Acked-by: Jon Loeliger <jdl@freescale.com>
22150 commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
22151 Author: Kumar Gala <galak@kernel.crashing.org>
22152 Date: Mon Aug 11 09:20:53 2008 -0500
22154 Fix fallout from autostart revert
22156 The autostart revert caused a bit of duplicated code as well as
22157 code that was using images->autostart that needs to get removed so
22158 we can build again.
22160 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22162 commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
22163 Author: Kumar Gala <galak@kernel.crashing.org>
22164 Date: Mon Aug 11 09:16:25 2008 -0500
22166 Fix compile error related to r8a66597-hcd & usb
22168 When building the 8544DS board we get this error:
22170 In file included from r8a66597-hcd.c:22:
22171 u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
22172 make[1]: *** [r8a66597-hcd.o] Error 1
22174 The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
22177 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22179 commit 2d0daa03612338a813e3c9d22680e54eabfea378
22180 Author: Becky Bruce <becky.bruce@freescale.com>
22181 Date: Mon Aug 4 14:02:26 2008 -0500
22183 POWERPC 86xx: Move BAT setup code to C
22185 This is needed because we will be possibly be locating
22186 devices at physical addresses above 32bits, and the asm
22187 preprocessing does not appear to deal with ULL constants
22188 properly. We now call write_bat in lib_ppc/bat_rw.c.
22190 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22191 Acked-by: Jon Loeliger <jdl@freescale.com>
22193 commit 9de67149db576c91b9c2a0a182652331e7e44211
22194 Author: Becky Bruce <becky.bruce@freescale.com>
22195 Date: Mon Aug 4 14:01:53 2008 -0500
22197 POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
22199 Perform sync/isync as required by the architecture.
22201 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22202 Acked-by: Jon Loeliger <jdl@freescale.com>
22204 commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
22205 Author: Becky Bruce <becky.bruce@freescale.com>
22206 Date: Mon Aug 4 14:01:16 2008 -0500
22208 POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
22210 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22211 Acked-by: Jon Loeliger <jdl@freescale.com>
22213 commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
22214 Author: Magnus Lilja <lilja.magnus@gmail.com>
22215 Date: Sun Aug 3 21:44:10 2008 +0200
22217 i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
22219 Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
22220 contacts instead of only the first 256 ones as is the case prior to
22223 Add missing MUX_* macros and update board files to use the new macros.
22225 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
22227 commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
22228 Author: Magnus Lilja <lilja.magnus@gmail.com>
22229 Date: Sun Aug 3 21:43:37 2008 +0200
22231 i.MX31: Fix IOMUX related typos
22233 Correct the names of some IOMUX macros.
22235 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
22237 commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
22238 Author: Steve Sakoman <steve@sakoman.com>
22239 Date: Mon Aug 11 20:26:16 2008 +0200
22241 OneNAND: Remove unused parameters to onenand_verify_page
22243 The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
22245 Signed-off-by: Steve Sakoman <steve@sakoman.com>
22246 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
22248 commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
22249 Author: Anatolij Gustschin <agust@denx.de>
22250 Date: Fri Aug 8 18:00:40 2008 +0200
22252 video: fix bug in cfb_console code
22254 FILL_15BIT_555RGB macro extension for pixel swapping
22255 by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
22256 introduced a bug in cfb_console:
22258 Bitmaps with odd-numbered width won't be rendered
22259 correctly and even U-Boot crashes are observed on
22260 some platforms while repeated rendering of such
22261 bitmaps with "bmp display". Also if a bitmap is
22262 rendered to an odd-numbered x starting position,
22263 the same problem occurs. This patch is an attempt
22266 Signed-off-by: Anatolij Gustschin <agust@denx.de>
22268 commit d9015f6a50d7258125349ef5c2af836458a0029a
22269 Author: Anatolij Gustschin <agust@denx.de>
22270 Date: Fri Aug 8 18:00:39 2008 +0200
22272 video: fix bug in logo_plot
22274 If logo_plot() should ever be called with x starting
22275 position other than zero and for pixel depths greater
22276 than 8bpp, logo colors distortion will be observed.
22277 This patch fixes the issue.
22279 Signed-off-by: Anatolij Gustschin <agust@denx.de>
22281 commit 406819ae94f79f5b59e01d163380ca7d83709251
22282 Author: Wolfgang Denk <wd@denx.de>
22283 Date: Mon Aug 11 00:17:52 2008 +0200
22285 MAINTAINERS: sort entries
22287 Signed-off-by: Wolfgang Denk <wd@denx.de>
22289 commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
22290 Author: Roy Zang <tie-fei.zang@freescale.com>
22291 Date: Thu Aug 7 18:19:28 2008 +0800
22293 Add mpc7448hpc2 maintainer information
22295 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
22297 commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
22298 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
22299 Date: Thu Aug 7 13:13:27 2008 +0530
22301 common/cmd_load.c - Minor code & Coding Style cleanup
22303 - os_data_header Variable is a carry over feature
22304 & unused. So removed all instance of this variable
22305 - Minor Code Style Update
22307 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
22308 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22310 commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
22311 Author: Magnus Lilja <lilja.magnus@gmail.com>
22312 Date: Wed Aug 6 19:32:33 2008 +0200
22314 Update the U-Boot wiki URL.
22316 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
22318 commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
22319 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
22320 Date: Sun Aug 10 17:56:36 2008 +0200
22322 OneNAND: Remove base address offset usage
22324 While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
22325 using OneNAND and some using NAND, we found some differences in OneNAND and
22326 NAND command address handling.
22328 As this might confuse users (it already confused us), we like to align OneNAND
22329 and NAND address handling.
22331 The issue is that cmd_onenand.c subtracts the onenand base address from the
22332 addresses you type into the u-boot command line so, unlike nand, you can't
22333 use addresses relative to the start of the onenand part e.g. this won't work:
22335 onenand read 82000000 280000 400000
22339 onenand read 82000000 20280000 400000
22341 Looking at recent git, the only board currently using OneNAND is Apollon, and
22342 for this the OneNAND base address is 0 (apollon.h)
22344 #define CFG_ONENAND_BASE 0x00000000
22346 so patch below won't break any existing boards and will align OneNAND and NAND
22347 handling on boards where OneNAND base address is != 0.
22349 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
22350 Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
22351 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
22353 commit c11528083ef6e55e76df742228c26e39d151813d
22354 Author: Kumar Gala <galak@kernel.crashing.org>
22355 Date: Thu Aug 7 09:28:20 2008 -0500
22357 mpc85xx: workaround old binutils bug
22359 The recent change to move the .bss outside of the image gives older
22360 binutils (ld from eldk4.1/binutils-2.16) some headache:
22362 ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
22363 ppc_85xx-ld: final link failed: Bad value
22365 We workaround it by being explicit about the program headers and not
22366 assigning the .bss to a program header.
22368 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22370 commit 0bf202ec586d4466c900e987720fa635c594d689
22371 Author: Wolfgang Denk <wd@denx.de>
22372 Date: Sun Aug 10 01:26:26 2008 +0200
22374 Revert "[new uImage] Add autostart flag to bootm_headers structure"
22376 This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
22378 The commit was based on a misunderstanding of the (documented)
22379 meaning of the 'autostart' environment variable. It might cause
22380 boards to hang if 'autostart' was used, with the potential to brick
22381 them. Go back to the documented behaviour.
22389 Signed-off-by: Wolfgang Denk <wd@denx.de>
22391 commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
22392 Author: Wolfgang Denk <wd@denx.de>
22393 Date: Sat Aug 9 23:17:32 2008 +0200
22395 TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
22397 - enable CFI driver where this was forgotten
22398 - enable mtdparts support
22399 - adjust default environment
22402 Signed-off-by: Wolfgang Denk <wd@denx.de>
22404 commit 41266c9b5a5f873df3ec891bb0907616958b5602
22405 Author: Peter Tyser <ptyser@xes-inc.com>
22406 Date: Tue Aug 5 10:51:57 2008 -0500
22408 FIT: Fix handling of images without ramdisks
22410 boot_get_ramdisk() should not treat the case when a FIT image does
22411 not contain a ramdisk as an error.
22413 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
22414 Acked-by: Michal Simek <monstr@monstr.eu>
22416 commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
22417 Author: Sergey Lapin <slapin@ossfans.org>
22418 Date: Sat Aug 9 01:39:09 2008 +0400
22420 DataFlash: AT45DB021 fix and AT45DB081 support
22422 Fix for page size of AT45DB021. Also adding bigger AT45DB081
22423 which comes with some newer boards.
22425 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
22427 commit ba9324451b662dd393afa53e5cc36fc5d3d10966
22428 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
22429 Date: Fri Aug 8 16:30:23 2008 +0900
22431 sh: Update sh7763rdp config
22433 Add sh_eth support to sh7763rdp.
22435 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
22437 commit 21f971ec265f6042ec21636d55d06a6bc0751077
22438 Author: Wolfgang Denk <wd@denx.de>
22439 Date: Mon Jul 7 01:22:29 2008 +0200
22441 TQM823L: re-enable logo support; update LCD_INFO text
22443 Signed-off-by: Wolfgang Denk <wd@denx.de>
22445 commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
22446 Author: Wolfgang Denk <wd@denx.de>
22447 Date: Fri Aug 8 16:41:56 2008 +0200
22449 TQM8xxL: fix support for second flash bank
22451 When switching the TQM8xxL modules to use the CFI flash driver,
22452 support for the second flash bank was broken because the CFI driver
22453 did not support dynamically sized banks. This gets fixed now.
22455 Signed-off-by: Wolfgang Denk <wd@denx.de>
22457 commit 2a112b234d879f6390503a5f4e38246acce9d0b0
22458 Author: Wolfgang Denk <wd@denx.de>
22459 Date: Fri Aug 8 16:39:54 2008 +0200
22461 CFI: allow for dynamically determined flash sizes and addresses
22463 The CFI driver allowed only for static initializers in the
22464 CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
22465 several flash banks contiguously if the bank sizes were not known in
22466 advance, which kind of violates U-Boot's design philosophy.
22468 (will be used for example by the TQM8xxL boards)
22470 Signed-off-by: Wolfgang Denk <wd@denx.de>
22472 commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
22473 Author: Ben Warren <biggerbadderben@gmail.com>
22474 Date: Thu Aug 7 23:26:35 2008 -0700
22476 QE UEC: Fix compiler warnings
22478 Moved static functions earlier in file so forward declarations are not needed.
22480 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22482 commit d5d28fe4aad5f4535400647a5617c11039506467
22483 Author: David Saada <David.Saada@ecitele.com>
22484 Date: Mon Mar 31 02:37:38 2008 -0700
22486 QE UEC: Add MII Commands
22488 Add MII commands to the UEC driver. Note that once a UEC device is selected,
22489 any device on its MDIO bus can be addressed.
22491 Signed-off-by: David Saada <david.saada@ecitele.com>
22492 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22494 commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
22495 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
22496 Date: Wed Jul 9 21:07:38 2008 +0900
22498 usb: add support for R8A66597 usb controller
22500 add support for Renesas R8A66597 usb controller.
22501 This patch supports USB Host mode.
22503 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
22504 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
22506 commit 1d10dcd041aaeae9fd7c821005692898a0303382
22507 Author: Hunter, Jon <jon-hunter@ti.com>
22508 Date: Sat Jul 26 18:59:16 2008 -0500
22510 Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
22512 Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
22514 Signed-off-by: Jon Hunter <jon-hunter@ti.com>
22515 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
22517 commit eab1007334b93a6209f1ec33615e26ef5311ede7
22518 Author: Steven A. Falco <sfalco@harris.com>
22519 Date: Wed Aug 6 15:42:52 2008 -0400
22521 ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
22523 The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
22524 configuration to match the schematic, and also sets the SDR0_PFC1 register to
22525 select the corresponding mode for the UARTs.
22527 Signed-off-by: Steven A. Falco <sfalco@harris.com>
22528 Signed-off-by: Stefan Roese <sr@denx.de>
22530 commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
22531 Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
22532 Date: Wed Aug 6 14:42:13 2008 +0200
22534 avr32: add support for EarthLCD Favr-32 board
22536 This patch adds support for the Favr-32 board made by EarthLCD.
22538 This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
22539 has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
22540 Ethernet, audio out, USB device, SD-card slot, USART and various other
22541 connectors for cennecting stuff to SPI, I2C, GPIO, etc.
22543 Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
22544 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
22546 commit bc9019e19758a19a388fb20ef18dc771cd39fdda
22547 Author: Rafael Campos <rafael.campos@hanscan.com>
22548 Date: Thu Jul 31 10:22:20 2008 +0200
22550 cfi-flash: Added support to flash_real_protect for Atmel flash devices
22552 Some of the flash memories produced by ATMEL start in read-only mode.
22553 We need to unprotect it. This patch allows the AT49BV6416 to work with
22554 cfi_flash memories. Tested in the at91rm9200ek board.
22556 Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
22557 Signed-off-by: Stefan Roese <sr@denx.de>
22559 commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
22560 Author: Guennadi Liakhovetski <lg@denx.de>
22561 Date: Tue Aug 5 15:36:39 2008 +0200
22563 cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
22565 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
22566 Signed-off-by: Stefan Roese <sr@denx.de>
22568 commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
22569 Author: Stefan Roese <sr@denx.de>
22570 Date: Wed Aug 6 14:06:03 2008 +0200
22574 Signed-off-by: Stefan Roese <sr@denx.de>
22576 commit f2302d4430e7f3f48308d6a585320fe96af8afbd
22577 Author: Stefan Roese <sr@denx.de>
22578 Date: Wed Aug 6 14:05:38 2008 +0200
22582 Signed-off-by: Stefan Roese <sr@denx.de>
22584 commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
22585 Author: Kenneth Johansson <kenneth@southpole.se>
22586 Date: Tue Jul 15 12:13:38 2008 +0200
22588 mpc5121: Move iopin features from board specific to common files.
22590 And in the process eliminate some duplicate register defines.
22592 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
22594 commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
22595 Author: John Rigby <jrigby@freescale.com>
22596 Date: Tue Aug 5 17:38:57 2008 -0600
22598 mpc5121: squash some fdt fixup errors
22600 On ADS5121 when booting linux the following errors are seen:
22601 Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
22602 Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
22603 Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
22605 This is caused by ft_cpu_setup trying to deal with
22606 both old and new soc node naming. This patch
22607 fixes this by being smarter about what to
22610 Also do soc node fixups by compatible instead of by path.
22611 A new board config called OF_SOC_COMPAT defined
22612 to be "fsl,mpc5121-immr" replaces the old
22613 OF_SOC node path that was defined to be "soc@80000000".
22615 Old device trees still work, but the compatiblity
22616 is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
22617 which is on by default in include/configs/ads5121.h.
22619 Signed-off-by: John Rigby <jrigby@freescale.com>
22621 commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
22622 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22623 Date: Sat Aug 2 23:48:30 2008 +0200
22625 drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
22627 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22629 commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
22630 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22631 Date: Sat Aug 2 23:48:32 2008 +0200
22633 nios2/sysid: fix printf warning
22635 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22637 commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
22638 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22639 Date: Sat Aug 2 23:48:33 2008 +0200
22641 Fix remaining build issues with MPC8xx FADS boards.
22643 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22645 commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
22646 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22647 Date: Sat Aug 2 23:48:31 2008 +0200
22649 nios2: fix phys_addr_t and phys_size_t support
22651 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22653 commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
22654 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22655 Date: Sat Aug 2 23:48:34 2008 +0200
22657 mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
22659 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22661 commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
22662 Author: Mark Jackson <mpfj@mimc.co.uk>
22663 Date: Fri Aug 1 09:48:29 2008 +0100
22665 Fix bitmap display for atmel lcd controller
22667 The current lcd_display_bitmap() function does not work properly
22668 for the Atmel LCD controller.
22670 2 fixes need to be done:-
22672 (a) when setting the colour map, use the lcd_setcolreg() function
22673 as provided by the Atmel driver
22674 (b) the data is never actually written to the lcd framebuffer !!
22676 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
22678 commit 2a433c66b1e2770349fe4911be23c375f053ebd8
22679 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22680 Date: Fri Aug 1 08:40:34 2008 +0200
22682 qemu_mips: update README to follow qemu update about default machine
22684 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22686 commit ac169d645f5f0e0b9a232563099209e92a355d8e
22687 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22688 Date: Thu Jul 31 19:53:21 2008 -0500
22690 ColdFire: Fix compilation issue caused by a missing function
22692 Implement usec2ticks() which is used by fsl_i2c.c in
22695 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22697 commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
22698 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22699 Date: Thu Jul 31 19:53:06 2008 -0500
22701 Fix compilation error for TASREG
22703 TASREG is ColdFire platform, the include ppc4xx.h in
22704 board/esd/common/flash.c causes conflict.
22706 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22708 commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
22709 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22710 Date: Thu Jul 31 19:52:36 2008 -0500
22712 Fix compilation error for MCF5275
22714 Rename OBJ to COBJ in board/platform/Makefile
22716 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22718 commit 5c40548f01218360a1f1395198c50ff45f3035b5
22719 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22720 Date: Thu Jul 31 19:52:28 2008 -0500
22722 Fix compile error caused by incorrect function return type
22724 Rename int mii_init(void) to void mii_init(void) for idmr
22727 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
22729 commit a58c78067c928976c082c758d3987e89ead5b191
22730 Author: Wolfgang Denk <wd@denx.de>
22731 Date: Fri Aug 1 12:06:22 2008 +0200
22733 Fix build issues with MPC8xx FADS boards.
22735 Signed-off-by: Wolfgang Denk <wd@denx.de>
22737 commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
22738 Author: Wolfgang Denk <wd@denx.de>
22739 Date: Thu Jul 31 17:54:03 2008 +0200
22741 Prepare v1.3.4-rc2: update CHANGELOG
22743 Signed-off-by: Wolfgang Denk <wd@denx.de>
22745 commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
22746 Author: Mark Jackson <mpfj@mimc.co.uk>
22747 Date: Thu Jul 31 16:09:00 2008 +0100
22749 Add gzipped logo support
22751 The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
22753 If this option is set, additionally to standard BMP
22754 images, gzipped BMP images can be displayed via the
22755 splashscreen support or the bmp command.
22757 However, the splashscreen function *only* supports standard BMP images.
22759 This patch adds the documented gzip support.
22761 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
22763 commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
22764 Author: Mark Jackson <mpfj@mimc.co.uk>
22765 Date: Thu Jul 31 15:56:48 2008 +0100
22767 Fix Atmel LCD controller endianess for AVR32 processors
22769 The Atmel lcd controller is used on Atmel's AT91 (little endian) and
22770 AVR32 (big endian) platforms.
22772 As such, the controller can handle both big and little endian memory.
22774 This patch fixes the driver for the AVR32 platform.
22776 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
22778 commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
22779 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22780 Date: Thu Jul 31 15:56:01 2008 +0200
22782 apollon: fix build out of tree
22784 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22786 commit 2e752be39d3e398d4ab89ffa6634c397df298297
22787 Author: Guennadi Liakhovetski <lg@denx.de>
22788 Date: Thu Jul 31 12:35:04 2008 +0200
22790 Uncompressed images loaded to their start address shall set load_end too
22792 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
22793 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
22795 commit c37207d7f51e19c17f859966f314e27cc1231801
22796 Author: Wolfgang Denk <wd@denx.de>
22797 Date: Wed Jul 16 16:38:59 2008 +0200
22799 Fix printf() format problems with configurable prompts
22801 U-Boot allows for configurable prompt strings using the
22802 CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
22803 the assumption was that any such user defined problts would contain
22804 exactly one "%d" format specifier. But some boards did not.
22806 To allow for flexible boot prompts without adding too complex code we
22807 now allow to specify the whole list of printf() arguments in the user
22808 definition. This is powerful, but requires a responsible user who
22809 really understands what he is doing, as he needs to know for exanple
22810 which variables are available in the respective context.
22812 Signed-off-by: Wolfgang Denk <wd@denx.de>
22814 commit 54754120637b6a7f4ff774fb199fc550bcfea1da
22815 Author: Wolfgang Denk <wd@denx.de>
22816 Date: Thu Jul 31 17:02:14 2008 +0200
22818 TQM85xx: fix typo introduce by commit ffbb5cb9
22820 Signed-off-by: Wolfgang Denk <wd@denx.de>
22822 commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
22823 Author: Wolfgang Denk <wd@denx.de>
22824 Date: Thu Jul 31 15:27:01 2008 +0200
22826 mvbc_p board: fix most build warnings.
22828 Signed-off-by: Wolfgang Denk <wd@denx.de>
22830 commit c4ec6db074051d2f6fc76a66411c60621b22bc02
22831 Author: Wolfgang Denk <wd@denx.de>
22832 Date: Thu Jul 31 13:57:20 2008 +0200
22834 E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
22836 Avoid "integer constant is too large for 'long' type" warnings.
22837 And simplify the code.
22839 Signed-off-by: Wolfgang Denk <wd@denx.de>
22841 commit 9196b44334c330cc13de2464c59181e4db71f549
22842 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
22843 Date: Wed Jul 30 23:21:19 2008 +0400
22845 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
22847 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
22849 commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
22850 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
22851 Date: Wed Jul 30 23:20:32 2008 +0400
22853 PPC: Add pci_clk in the global_data for CPM2 processors
22855 This patch adds pci_clk field to the global_data structure for the
22856 processors which have CPM2 module in case the CONFIG_PCI is defined.
22858 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
22860 commit f0ff885ca64655bee6540eb8a25eed90b1152686
22861 Author: Kumar Gala <galak@kernel.crashing.org>
22862 Date: Wed Jul 30 14:13:30 2008 -0500
22864 mpc85xx: Update linker scripts for Freescale boards
22866 * Move to using absolute addressing always. Makes the scripts a bit more
22867 portable and common
22868 * Moved .bss after the end of the image. These allows us to have more
22869 room in the resulting binary image for code and data.
22870 * Removed .text object files that aren't really needed
22871 * Make sure _end is 4-byte aligned as the .bss init code expects this.
22872 (Its possible that the end of .bss isn't 4-byte aligned)
22874 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22876 commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
22877 Author: Kumar Gala <galak@kernel.crashing.org>
22878 Date: Wed Jul 30 08:01:15 2008 -0500
22880 Fix compile warnings in dlmalloc
22882 The origional code was using on odd reference to get to the first
22883 real element in av_[]. The first two elements of the array are
22884 not used for actual bins, but for house keeping. If we are more
22885 explicit about how use the first few elements we can get rid of the
22888 dlmalloc.c: In function 'malloc_extend_top':
22889 dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
22890 dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
22891 dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
22894 The logic of how this code came to be is:
22895 bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
22897 SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
22898 bin_at(0) = &(av_[0])
22900 Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
22902 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22904 commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
22905 Author: Stefan Roese <sr@denx.de>
22906 Date: Wed Jul 30 10:21:01 2008 +0200
22908 ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
22910 Signed-off-by: Stefan Roese <sr@denx.de>
22912 commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
22913 Author: Stefan Roese <sr@denx.de>
22914 Date: Wed Jul 30 09:59:51 2008 +0200
22916 cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
22918 A recent patch used '#if (CONFIG_CMD_USB)' instead of
22919 '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
22920 common/bootm.c compile again.
22922 Signed-off-by: Stefan Roese <sr@denx.de>
22923 Acked-by: Markus Klotzbuecher <mk@denx.de>
22925 commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
22926 Author: Kyungmin Park <kmpark@infradead.org>
22927 Date: Tue Jul 22 08:01:43 2008 +0900
22929 Remove unused I2C at apollon board
22931 There are no I2C devices on this board.
22933 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
22935 commit 3c95960e526b3b026da20201db64526f46faf14b
22936 Author: Wolfgang Denk <wd@denx.de>
22937 Date: Thu Jul 31 10:12:09 2008 +0200
22939 at91rm9200dk, csb637: fix NAND related build problems
22941 Tried fixing NAND support for the at91rm9200dk board; untested.
22942 Disabled NAND support in the csb637 board config file.
22944 Signed-off-by: Wolfgang Denk <wd@denx.de>
22946 commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
22947 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
22948 Date: Wed Jul 30 12:39:28 2008 +0200
22950 ppc4xx: ML507: Environment in flash and MTD Support
22952 - Relocate the location of U-Boot in the flash
22953 - Save the environment in one sector of the flash memory
22956 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
22957 Signed-off-by: Stefan Roese <sr@denx.de>
22959 commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
22960 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
22961 Date: Tue Jul 29 17:16:10 2008 +0200
22963 ppc4xx: ML507: Use of get_ram_size in board ml507
22965 - Change suggested by WD
22967 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
22968 Signed-off-by: Stefan Roese <sr@denx.de>
22970 commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
22971 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
22972 Date: Mon Jul 21 20:30:07 2008 +0200
22974 ppc4xx: ML507: U-Boot in flash and System ACE
22976 This patch allows booting from FLASH the ML507 board by Xilinx.
22977 Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
22979 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
22980 Signed-off-by: Stefan Roese <sr@denx.de>
22982 commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
22983 Author: Julien May <mailinglist@miromico.ch>
22984 Date: Mon Jun 23 13:57:52 2008 +0200
22986 Add support for the hammerhead (AVR32) board
22988 The Hammerhead platform is built around a AVR32 32-bit microcontroller
22989 from Atmel. It offers versatile peripherals, such as ethernet, usb
22990 device, usb host etc.
22992 The board also incooperates a power supply and is a Power over Ethernet
22993 (PoE) Powered Device (PD).
22995 Additonally, a Cyclone III FPGA from Altera is integrated on the board.
22996 The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
22997 DDR2 SDRAM interfaces, which will cover even the most exceptional need
22998 of memory bandwidth. Together with the onboard video decoder the board
22999 is ready for video processing.
23001 For more information see: http:///www.miromico.com/hammerhead
23003 Signed-off-by: Julien May <mailinglist@miromico.ch>
23004 [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
23005 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23007 commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
23008 Author: Kumar Gala <galak@kernel.crashing.org>
23009 Date: Tue Jul 29 12:23:49 2008 -0500
23011 fsl_i2c: Use timebase timer functions instead of get_timer()
23013 The current implementation of get_timer() is only really useful after we
23014 have relocated u-boot to memory. The i2c code is used before that as part
23015 of the SPD DDR setup.
23017 We actually have a bug when using the get_timer() code before relocation
23018 because the .bss hasn't been setup and thus we could be reading/writing
23019 a random location (probably in flash).
23021 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23023 commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
23024 Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
23025 Date: Tue Jul 29 14:49:31 2008 +0200
23027 Adder8xx: Fix CFG_MONITOR_LEN
23029 Due to increased space usage, U-Boot can no longer be stored in three sectors.
23030 The current U-Boot use just over three flash sectors (197k), and U-Boot will
23031 become corrupt after saving environment variables. This patch adds another 64k
23032 to CFG_MONITOR_LEN.
23034 Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
23036 commit a4c59ad4a21140550ada6f97690d2527c4146ce5
23037 Author: Kyungmin Park <kmpark@infradead.org>
23038 Date: Tue Jul 29 08:47:57 2008 +0900
23040 Add OneNAND IPL related files to gitignore
23042 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
23044 commit 8d87589e8e874df7120a3d9667f051bc33bac250
23045 Author: Rafal Jaworowski <raj@semihalf.com>
23046 Date: Mon Jul 28 20:38:25 2008 +0200
23048 API: Teach the storage layer about SATA and MMC options.
23050 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
23051 Acked-by: Rafal Jaworowski <raj@semihalf.com>
23053 commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
23054 Author: Rafal Jaworowski <raj@semihalf.com>
23055 Date: Mon Jul 28 20:37:48 2008 +0200
23057 API: Dump contents of sector 0 in the demo application.
23059 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
23060 Acked-by: Rafal Jaworowski <raj@semihalf.com>
23062 commit 13ca6305f2eba49c175f6370c35286141059c789
23063 Author: Rafal Jaworowski <raj@semihalf.com>
23064 Date: Mon Jul 28 20:37:10 2008 +0200
23066 API: Correct storage enumeration routine, other minor fixes in API storage area.
23068 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
23069 Acked-by: Rafal Jaworowski <raj@semihalf.com>
23071 commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
23072 Author: Rafal Jaworowski <raj@semihalf.com>
23073 Date: Mon Jul 28 20:36:19 2008 +0200
23075 API: Fix compilation warnings in api_examples/demo.c.
23077 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
23079 commit c14eefcc48212af2f3314809605698dd8393a90a
23080 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23081 Date: Sun Jul 27 17:09:43 2008 +0200
23083 Fix more printf() format warnings
23085 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23087 commit 936897d4d1365452bbbdf8430db5e7769ef08d38
23088 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23089 Date: Fri Jul 25 15:18:16 2008 +0200
23091 Fix remaining CFG_CMD_ define, ifdef and comments
23093 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23095 commit 5d1d00fb36005482e1803a00ddc46efa11d719af
23096 Author: Stefano Babic <sbabic@denx.de>
23097 Date: Fri Jul 25 08:57:40 2008 +0200
23099 Add include for config.h in command.h.
23101 Because the cmd_tbl_s structure depends on the configuration file, it
23102 must be assured that config.h is included before the structure is
23103 evaluated by the compiler. If this is not certain, it could happen
23104 that the compiler generates structures of different size, depending
23105 on the fact if the source file includes <config.h> before or after
23108 The effect is that u-boot crashes when tries to relocate the command
23109 table (for ppc) or try to access to the command table for other
23112 The problem can happen on board-depending commands. All general
23113 commands under /common are unaffected, because they include already
23114 config.h before command.h.
23116 Signed-off-by: Stefano Babic <sbabic@denx.de>
23118 commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
23119 Author: Scott Wood <scottwood@freescale.com>
23120 Date: Wed Jul 23 13:16:06 2008 -0500
23122 NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
23124 This fixes building out-of-tree.
23126 Signed-off-by: Scott Wood <scottwood@freescale.com>
23128 commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
23129 Author: Heiko Schocher <hs@denx.de>
23130 Date: Wed Jul 23 07:30:46 2008 +0200
23132 Fix warnings if compiling with IDE support.
23134 cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
23135 cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
23137 Signed-off-by: Heiko Schocher <hs@denx.de>
23139 commit 7610db17fd4d59c51d825488526d85ede2f06767
23140 Author: Adrian Filipi <adrian.filipi@eurotech.com>
23141 Date: Tue Jul 22 14:28:11 2008 -0400
23143 Removed support for the adsvix board.
23145 Support for the adsvix was originally provided by Applied Data
23146 Systems (ADS), inc., now EuroTech, Inc.
23147 The board never shipped aside from some sample boards.
23149 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
23151 commit f96b44cef897bd372beb86dde1b33637c119d84d
23152 Author: Remy Bohmer <linux@bohmer.net>
23153 Date: Tue Jul 22 16:22:11 2008 +0200
23155 ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
23157 If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
23158 never set, because relocation to RAM is actually never done by U-boot
23159 itself. However, several pieces of code check if this flag is set at
23162 So, to make sure this flag is set on boards skipping relocation, this
23163 is added to the initialisation of U-boot at a moment where it is safe
23166 Signed-off-by: Remy Bohmer <linux@bohmer.net>
23168 commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
23169 Author: Timur Tabi <timur@freescale.com>
23170 Date: Mon Jul 21 14:26:23 2008 -0500
23172 fsl-i2c: fix writes to data segment before relocation
23174 Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
23175 relocation. Commit d8c82db4 added the ability for i2c_init() to program the
23176 I2C bus speed and save the value in i2c_bus_speed[], which is a global
23177 variable. It is an error to write to the data segment before relocation,
23178 which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
23180 Signed-off-by: Timur Tabi <timur@freescale.com>
23182 commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
23183 Author: Wolfgang Ocker <weo@reccoware.de>
23184 Date: Mon Jul 28 16:56:51 2008 +0200
23186 mips: Fix baudrate divisor computation on alchemy cpus
23188 Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
23191 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
23192 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
23194 commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
23195 Author: Ben Warren <biggerbadderben@gmail.com>
23196 Date: Sat Jul 5 00:08:48 2008 -0700
23198 Moved initialization of AVR32 Ethernet controllers to board_eth_init()
23200 Renamed initialization functions for atngw100 and atstk1000.
23201 Removed initializations for these boards from net/eth.c
23203 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23204 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23206 commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
23207 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23208 Date: Wed Jul 23 10:55:46 2008 +0200
23210 spi flash: Fix printf() format warnings
23212 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23214 commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
23215 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23216 Date: Wed Jul 23 10:55:31 2008 +0200
23218 atmel_mci: Fix printf() format warnings
23220 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23222 commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
23223 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23224 Date: Wed Jul 23 10:55:15 2008 +0200
23226 avr32: Fix printf() format warnings
23228 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23230 commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
23231 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23232 Date: Wed Jul 23 10:52:19 2008 +0200
23234 avr32: asm/io.h needs asm/types.h
23236 map_physmem() takes a phys_addr_t as parameter. This type is defined in
23237 asm/types.h, so we need to include that file.
23239 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
23241 commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
23242 Author: Michal Simek <monstr@monstr.eu>
23243 Date: Thu Jul 17 12:25:46 2008 +0200
23245 microblaze: Fix printf() format issues
23247 Signed-off-by: Michal Simek <monstr@monstr.eu>
23249 commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
23250 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
23251 Date: Thu Jul 17 07:27:51 2008 +0530
23253 Remove unused code from lib_arm/bootm.c
23255 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
23257 commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
23258 Author: Detlev Zundel <dzu@denx.de>
23259 Date: Wed Jul 16 18:56:45 2008 +0200
23261 tqm85xx: Demystify 'DK: !!!' comment
23263 Signed-off-by: Detlev Zundel <dzu@denx.de>
23265 commit b2f44ba570f3a01113bbb745daf46f3858d22f53
23266 Author: Detlev Zundel <dzu@denx.de>
23267 Date: Wed Jul 16 18:56:44 2008 +0200
23269 83xx/85xx/86xx: Add LTEDR local bus definitions
23271 Signed-off-by: Detlev Zundel <dzu@denx.de>
23273 commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
23274 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23275 Date: Wed Jul 16 16:22:32 2008 +0200
23277 serial_xuartlite.c: fix compiler warnings
23279 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23280 Acked-by: Grant Likely <grant.likely@secretlab.ca>
23282 commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
23283 Author: Stefan Roese <sr@denx.de>
23284 Date: Fri Jul 18 11:03:35 2008 +0200
23286 POST: Add disable interrupts in some of the missing CPU POST tests
23288 Some CPU POST tests did not disable the interrupts while running. This
23289 seems to be necessary to protect this self modifying code.
23291 Signed-off-by: Stefan Roese <sr@denx.de>
23293 commit 97a3bf268d096e0e97e54048448c35114edcf557
23294 Author: Stefan Roese <sr@denx.de>
23295 Date: Fri Jul 18 10:43:24 2008 +0200
23297 ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
23299 This is needed for boards that define CFG_64BIT_STRTOUL but don't define
23302 Signed-off-by: Stefan Roese <sr@denx.de>
23304 commit 0043ac55024963295fc79b39af85b6dc3b261e17
23305 Author: Niklaus Giger <niklaus.giger@netstal.com>
23306 Date: Fri Jul 18 11:22:23 2008 +0200
23308 POST PPC4xx/spr IVPR only if PPC440
23310 The SPR IVPR register is only present (as far as I know) for
23311 processors with a PPC440 core.
23313 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23314 Acked-by: Stefan Roese <sr@denx.de>
23316 commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
23317 Author: Stefan Roese <sr@denx.de>
23318 Date: Fri Jul 18 10:42:29 2008 +0200
23320 ppc4xx: Enable 64bit printf format on 440/460 platforms
23322 This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
23323 440/460 platforms. This may be needed since those platforms support
23324 36bit physical address space.
23326 Signed-off-by: Stefan Roese <sr@denx.de>
23328 commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
23329 Author: Stefan Roese <sr@denx.de>
23330 Date: Fri Jul 18 15:57:23 2008 +0200
23332 ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
23334 This patch fixes a problem with incorrect MODTx (On Die Termination)
23335 setup for a configuration with multiple DIMM's and multiple ranks.
23336 Without this change Katmai was unable to boot Linux with DDR2 frequency
23337 >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
23338 with DDR2 frequency = 640MHz and mem=4GB.
23340 Signed-off-by: Stefan Roese <sr@denx.de>
23342 commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
23343 Author: Stefan Roese <sr@denx.de>
23344 Date: Fri Jul 18 12:24:41 2008 +0200
23346 ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
23348 Signed-off-by: Stefan Roese <sr@denx.de>
23350 commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
23351 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23352 Date: Thu Jul 17 12:47:09 2008 +0200
23354 ppc4xx: ML507 Board Support
23356 The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
23358 -Virtex 5 FX FPGA (With a ppc440x5 in it)
23363 -Serial ATA connectors
23364 -RS232 Level Conversors
23365 -Ethernet Transceiver
23367 This patch gives support to a standard design produced by EDK for this
23368 board: ppc440, uartlite, xilinx_int and flash
23370 - Includes Changes propossed by Stefan Roese and Michal Simek
23372 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23373 Acked-by: Stefan Roese <sr@denx.de>
23375 commit d865fd09809a3a18669f35f970781820af40e4de
23376 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23377 Date: Thu Jul 17 11:44:12 2008 +0200
23379 ppc4xx: CPU PPC440x5 on Virtex5 FX
23381 -This patchs gives support for the embbedded ppc440
23382 on the Virtex5 FPGAs
23383 -interrupts.c divided in uic.c and interrupts.c
23384 -xilinx_irq.c for xilinx interrupt controller
23385 -Include modifications propossed by Stefan Roese
23387 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
23388 Acked-by: Stefan Roese <sr@denx.de>
23390 commit 340ccb260f21516be360745d5c5e3bd0657698df
23391 Author: Sebastian Siewior <bigeasy@linutronix.de>
23392 Date: Wed Jul 16 20:04:49 2008 +0200
23394 cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
23396 This got broken by commits 93c56f212c
23397 [cfi_flash: support of long cmd in U-boot.]
23399 That command needs to be in little endian format on BE machines
23400 with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
23401 gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
23402 the cmdbuf in case portwidth = chipwidth = 8bit.
23404 Cc: Alexey Korolev <akorolev@infradead.org>
23405 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
23406 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
23408 commit 11188d55bc16dd907451c00282e00a038f73dd62
23409 Author: Stefan Roese <sr@denx.de>
23410 Date: Thu Jul 17 10:40:51 2008 +0200
23412 ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
23414 Signed-off-by: Stefan Roese <sr@denx.de>
23416 commit 021f6df6e96af5b387810cf96d24848da1faa55c
23417 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23418 Date: Thu Jul 10 17:20:51 2008 +0400
23420 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
23422 The thinko was quite silly indeed, I messed with !ptr. Normally this
23423 would trigger some fault, but in U-Boot NULL pointer is equal to phys
23424 0, so the code was working still, just didn't actually test mpc8315erdb
23425 environment variable value. Heh.
23427 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23428 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23430 commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
23431 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23432 Date: Tue Jul 8 21:00:04 2008 +0400
23434 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
23436 Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
23437 support, or without TSEC1 but with USB ULPI PHY support in addition.
23438 With this patch user can specify desired USB PHY.
23440 Also, it seems that we can't distinguish the two boards in software, so
23441 user have to set `mpc8315erdb' environment variable to either 'tsec1'
23442 (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
23443 Linux will not probe for TSEC1.
23445 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23446 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23448 commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
23449 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23450 Date: Tue Jul 8 20:59:43 2008 +0400
23452 fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
23454 Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
23455 MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
23456 (connected to the four-ports hub, usb host only).
23458 This patch implements support for passing Dual-Role USB controller's
23459 device tree property phy_type through the usb_phy_type environment
23462 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23463 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
23464 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23466 commit 699f05125509249072a0b865c8d35520d97cd501
23467 Author: Wolfgang Denk <wd@denx.de>
23468 Date: Tue Jul 15 22:22:44 2008 +0200
23470 Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
23472 Signed-off-by: Wolfgang Denk <wd@denx.de>
23474 commit bcab74baa6b1b1c969038ab6f64a186239180405
23475 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
23476 Date: Tue Jul 15 11:23:02 2008 -0400
23478 Round the serial port clock divisor value returned by calc_divisor()
23480 Round the serial port clock divisor value returned by
23483 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
23484 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
23486 commit 0328ef0edfe950f0b7b8b368dae482531506b74a
23487 Author: Robin Getz <rgetz@blackfin.uclinux.org>
23488 Date: Tue Jul 15 21:44:46 2008 +0200
23490 Fix DHCP protocol so U-Boot does not respond too early
23491 on the network with it's offered IP number; it should not reply until
23492 after it has received a DHCP ACK message. Also ensures that U-Boot
23493 does it's DHCPREQUEST as broadcast (per RFC 2131).
23495 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
23496 Acked-by: Ben Warren <biggerbadderben@gmail.com>
23497 Signed-off-by: Wolfgang Denk <wd@denx.de>
23499 commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
23500 Author: Sebastian Siewior <bigeasy@linutronix.de>
23501 Date: Tue Jul 15 13:35:23 2008 +0200
23503 cfi_flash: make the command u32 only
23505 This got changed by commit 93c56f212c
23506 [cfi_flash: support of long cmd in U-boot.]
23508 Long is the wrong type because it will behave differently on 64bit
23509 machines in a way that is probably not expected. u32 should be
23512 Cc: Alexey Korolev <akorolev@infradead.org>
23513 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
23514 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
23516 commit 31cfe57491b183acae575d486729e158f016c27b
23517 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23518 Date: Mon Jul 14 23:48:41 2008 +0200
23520 tools/gitignore: update to all generated files
23522 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23524 commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
23525 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
23526 Date: Wed Jul 9 18:30:44 2008 +0200
23528 mpc5xxx: Add MVBC_P board support
23530 The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
23531 controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
23533 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
23534 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
23536 commit e2d31fb3450653115452144363d5bde4e5e3e693
23537 Author: Timur Tabi <timur@freescale.com>
23538 Date: Thu Jun 19 17:56:11 2008 -0500
23540 Update Freescale sys_eeprom.c to handle CCID formats
23542 Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
23543 NXID format replaces the older CCID format, but it's important to support both
23544 since most boards out there still use the CCID format. This change is in
23545 preparation for using one file to handle both formats. This will also unify
23546 EEPROM support for all Freescale 85xx and 86xx boards.
23548 Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
23549 instead of ID_EEPROM_ADDR.
23551 Signed-off-by: Timur Tabi <timur@freescale.com>
23553 commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
23554 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
23555 Date: Fri Jul 11 17:22:43 2008 +0900
23557 pci: sh: Add pci_skip_dev and pci_print_dev function
23559 Add function of new PCI, pci_skip_dev and pci_print_dev.
23561 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
23562 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23564 commit 1107014e835ec9d46c0333f4211d104f77442db0
23565 Author: Andy Fleming <afleming@freescale.com>
23566 Date: Mon Jul 14 20:29:07 2008 -0500
23568 Clean up INIT_RAM options
23570 The L2_INIT_RAM option was unused, and recent changes to the TLB code
23571 meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
23572 the amount of mapped space attached to nothing, we change things so the TLBs
23575 Signed-off-by: Andy Fleming <afleming@freescale.com>
23577 commit 4524561820a9327e89107854b3a7187800ccf719
23578 Author: Andy Fleming <afleming@freescale.com>
23579 Date: Mon Jul 14 20:26:57 2008 -0500
23581 Remove fake flash bank from 8544 DS
23583 The fake flash bank was generating errors for anyone who didn't have a
23584 PromJET hooked up to the board. As that constitutes the vast majority of
23585 users, we remove it.
23587 Signed-off-by: Andy Fleming <afleming@freescale.com>
23589 commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
23590 Author: Kumar Gala <galak@kernel.crashing.org>
23591 Date: Mon Jul 14 14:07:03 2008 -0500
23593 MPC8544DS: Add ATI Video card support
23595 Add support for using a PCIe ATI Video card on PCIe2.
23597 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23599 commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
23600 Author: Kumar Gala <galak@kernel.crashing.org>
23601 Date: Mon Jul 14 14:07:02 2008 -0500
23603 85xx: Add some L1/L2 SPR register definitions
23605 Add new L1/L2 SPRs related to e500mc cache config and control.
23607 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23609 commit e5852787f0c3c442a276262f13d91ca450605ac0
23610 Author: Kumar Gala <galak@kernel.crashing.org>
23611 Date: Mon Jul 14 14:07:01 2008 -0500
23613 MPC8544DS: Report board id, board version and fpga version.
23615 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23617 commit 73f15a060f67a2462551c334215bd20fac6b81d1
23618 Author: Kumar Gala <galak@kernel.crashing.org>
23619 Date: Mon Jul 14 14:07:00 2008 -0500
23621 85xx: Cleanup L2 cache size detection
23623 The L2 size detection code was a bit confusing and we kept having to add
23624 code to it to handle new processors. Change the sense of detection so we
23625 look for the older processors that aren't changing.
23627 Also added support for 1M cache size on 8572.
23629 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23631 commit c3ca7e5e00a24451f20df3bded9a61ba541921df
23632 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
23633 Date: Fri Jul 11 15:33:08 2008 -0400
23635 sbc8560: enable CONFIG_OF_LIBFDT by default
23637 Make the default build for the sbc8560 board be powerpc
23638 capable with libfdt support.
23640 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
23642 commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
23643 Author: Andy Fleming <afleming@freescale.com>
23644 Date: Mon Jul 14 20:04:40 2008 -0500
23646 Fix indentation for default boot environment variables
23648 This was proposed by Paul Gortmaker in response to Wolfgang's comments on
23649 similar #defines in sbc8560.h.
23651 Signed-off-by: Andy Fleming <afleming@freescale.com>
23653 commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
23654 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
23655 Date: Fri Jul 11 15:33:07 2008 -0400
23657 sbc8560: add default fdt values
23659 Add in the default fdt settings and the typical EXTRA_ENV
23660 settings as borrowed from the mpc8560ads. Fix a couple
23661 of stale references to the mpc8560ads dating back to the
23662 original clone/fork.
23664 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
23665 Signed-off-by: Andy Fleming <afleming@freescale.com>
23667 commit d04e76edf92f7f89696989e8702b97e020455af3
23668 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
23669 Date: Fri Jul 11 15:33:06 2008 -0400
23671 sbc8560: add in ft_board_setup()
23673 Add in for the sbc8560, the ft_board_setup() routine, based on what is
23674 in use for the Freescale MPC8560ADS board.
23676 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
23678 commit c158bcaca3b31cbe38c4143812e6170e38a57393
23679 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
23680 Date: Fri Jul 11 15:33:05 2008 -0400
23682 sbc8560: define eth0 and eth1 instead of eth1 and eth2
23684 The existing config doesn't define CONFIG_HAS_ETH0, and so the
23685 fdt support doesn't update the zeros in the dtb local-mac with
23686 real data from the u-boot env. Since the existing config is
23687 tailored to just two interfaces, get rid of the ETH2 definitions
23690 Also don't include any end user specific data into the environment
23691 by default -- things like MAC address, network parameters etc. need
23692 to come from the end user.
23694 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
23695 Signed-off-by: Andy Fleming <afleming@freescale.com>
23697 commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
23698 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
23699 Date: Fri Jul 11 15:33:04 2008 -0400
23701 sbc8560: properly set cs0_bnds for 512MB
23703 The sbc8560 board ships with 512MB of memory installed,
23704 but the current cs0_bnds is hard coded for 256MB. Set the
23705 value based on CFG_SDRAM_SIZE.
23707 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
23709 commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
23710 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
23711 Date: Fri Jul 11 15:33:03 2008 -0400
23713 sbc8560: proper definitions for TSEC.
23715 The definitions for the TSEC have become out of date. There is no
23716 longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
23717 Update to match those of other boards, like the MPC8560ADS.
23719 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
23720 Acked-by: Ben Warren <biggerbadderben@gmail.com>
23722 commit 71074abbe0c76429577aff58aeff0a24ad210b23
23723 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
23724 Date: Wed Jul 9 13:23:05 2008 -0400
23726 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
23728 Some boards that have external 16550 UARTs don't have a direct
23729 tie between bi_busfreq and the clock used for the UARTs. Boards
23730 that do have such a tie should set CFG_NS16550_CLK to be
23731 get_bus_freq(0) -- which most of them do already.
23733 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
23734 Acked-by: Kim Phillips <kim.phillips@freescale.com>
23736 commit 24ef76f320fbadf074105229826514db140f939f
23737 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
23738 Date: Wed Jul 2 07:03:53 2008 -0700
23740 Change the temp map to ROM to align addresses to page size.
23742 With a page size of BOOKE_PAGESZ_16M, both the real and effective
23743 addresses must be multiples of 16MB. The hardware silently truncates
23744 them so the code happens to work. This patch clarifies the situation
23745 by establishing addresses that the hardware doesn't need to truncate.
23747 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
23748 Signed-off-by: Andy Fleming <afleming@freescale.com>
23750 commit 06b4186c10204b6683edb047ac5f506fb0ce0937
23751 Author: Kim Phillips <kim.phillips@freescale.com>
23752 Date: Tue Jun 17 17:45:22 2008 -0500
23754 mpc85xx: use IS_E_PROCESSOR macro
23756 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23758 commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
23759 Author: Kim Phillips <kim.phillips@freescale.com>
23760 Date: Mon Jun 16 15:55:53 2008 -0500
23762 fdt: add crypto node handling for MPC8{3, 5}xxE processors
23764 Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
23765 check rev and up-rev crypto node (to SEC rev. 2.4 property values)
23766 if on an 'EA' processor, e.g. MPC8349EA.
23768 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23770 commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
23771 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
23772 Date: Fri Jul 11 15:10:11 2008 -0400
23774 ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
23776 ARM DaVinci: Remove extern phy_t declaration by moving
23777 code to proper place.
23779 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
23781 commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
23782 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
23783 Date: Fri Jul 11 15:10:10 2008 -0400
23785 ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
23787 ARM DaVinci: Remove duplicate definitions of MACH_TYPE
23788 and prototype of i2c_init().
23790 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
23792 commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
23793 Author: Kumar Gala <galak@kernel.crashing.org>
23794 Date: Mon Jul 14 14:03:02 2008 -0500
23796 Fix some more printf() format problems.
23798 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23800 commit 45b16d22c64674ccd8c4637456a987463609141c
23801 Author: Wolfgang Denk <wd@denx.de>
23802 Date: Mon Jul 14 22:38:42 2008 +0200
23804 Fix coding style; make code better parsable by external tools
23806 Signed-off-by: Wolfgang Denk <wd@denx.de>
23808 commit b880cbf207b1c109d3a661417a8feddcbd729a9d
23809 Author: Wolfgang Denk <wd@denx.de>
23810 Date: Mon Jul 14 21:19:08 2008 +0200
23812 cpu/i386/serial.c: Fix syntax errors
23814 Signed-off-by: Wolfgang Denk <wd@denx.de>
23816 commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
23817 Author: Wolfgang Denk <wd@denx.de>
23818 Date: Mon Jul 14 20:41:35 2008 +0200
23820 elppc board: Coding style cleanup.
23822 Signed-off-by: Wolfgang Denk <wd@denx.de>
23824 commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
23825 Author: Wolfgang Denk <wd@denx.de>
23826 Date: Mon Jul 14 20:40:22 2008 +0200
23828 elppc board: fix syntax error.
23830 Signed-off-by: Wolfgang Denk <wd@denx.de>
23832 commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
23833 Author: Wolfgang Denk <wd@denx.de>
23834 Date: Mon Jul 14 20:38:26 2008 +0200
23836 EB+MCF-EV123 board: fix coding style (alingment)
23838 Signed-off-by: Wolfgang Denk <wd@denx.de>
23840 commit 6841785a0bb0f38175456a923edd634fb7dd6947
23841 Author: Wolfgang Denk <wd@denx.de>
23842 Date: Mon Jul 14 20:36:44 2008 +0200
23844 EB+MCF-EV123 board: fix syntx error
23846 Signed-off-by: Wolfgang Denk <wd@denx.de>
23848 commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
23849 Author: Andy Fleming <afleming@freescale.com>
23850 Date: Mon Jul 7 18:02:08 2008 -0500
23852 Remove LBC_CACHE_BASE from 8544 DS
23854 The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
23855 space for some anyway, we were allowing speculative loads into unmapped space,
23856 which would cause an exception (annoying, even if ultimately harmless).
23857 Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
23860 Signed-off-by: Andy Fleming <afleming@freescale.com>
23862 commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
23863 Author: Wolfgang Denk <wd@denx.de>
23864 Date: Mon Jul 14 15:19:07 2008 +0200
23866 Code cleanup: fix old style assignment ambiguities like "=-" etc.
23868 Signed-off-by: Wolfgang Denk <wd@denx.de>
23870 commit d7854223c5c85b5849fbf422cc8ac0efef461c37
23871 Author: Wolfgang Denk <wd@denx.de>
23872 Date: Mon Jul 14 15:10:53 2008 +0200
23874 AmigaOneG3SE: remove dead and incomplete files
23876 Signed-off-by: Wolfgang Denk <wd@denx.de>
23878 commit b64f190b7a34224df09b559ca111eb1b733f00ad
23879 Author: Wolfgang Denk <wd@denx.de>
23880 Date: Mon Jul 14 15:06:35 2008 +0200
23882 Fix printf() format issues with sizeof_t types by using %zu
23884 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23885 Signed-off-by: Wolfgang Denk <wd@denx.de>
23887 commit f354b73e16a86f9e9085471a830605f74f84ea5d
23888 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23889 Date: Mon Jul 14 14:11:45 2008 +0200
23891 vsprintf: add z and t options
23893 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23895 commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
23896 Author: Wolfgang Denk <wd@denx.de>
23897 Date: Sun Jul 13 23:07:35 2008 +0200
23899 Fix some more printf() format issues.
23901 Signed-off-by: Wolfgang Denk <wd@denx.de>
23903 commit d5996dd555edf52721b7691a4c59de016251ed39
23904 Author: Wolfgang Denk <wd@denx.de>
23905 Date: Sun Jul 13 19:51:00 2008 +0200
23907 Fix some more printf() format problems.
23909 Signed-off-by: Wolfgang Denk <wd@denx.de>
23911 commit 0f9d5f6d6e814907794995c6a22af752040c35d9
23912 Author: Wolfgang Denk <wd@denx.de>
23913 Date: Sun Jul 13 19:48:26 2008 +0200
23915 ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
23917 Signed-off-by: Wolfgang Denk <wd@denx.de>
23919 commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
23920 Author: Anatolij Gustschin <agust@denx.de>
23921 Date: Sat Jul 12 17:31:36 2008 +0200
23923 Fix bug in Lime video driver
23925 We need to wait while drawing engine clears frame
23926 buffer before any further software accesses to frame
23927 buffer will be initiated. Otherwise software drawn
23928 parts could be partially destroyed by the drawing
23929 engine or even GDC chip freeze could occur (as
23930 observed on socrates board).
23932 Signed-off-by: Anatolij Gustschin <agust@denx.de>
23934 commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
23935 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23936 Date: Sat Jul 12 14:36:34 2008 +0200
23938 Fix some more printf() format issues.
23940 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23942 commit 18c8a28aad49803780bd8d52432ded528e37e701
23943 Author: Michal Simek <monstr@monstr.eu>
23944 Date: Fri Jul 11 15:11:57 2008 +0200
23946 hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
23948 Signed-off-by: Michal Simek <monstr@monstr.eu>
23949 Acked-by: Stefan Roese <sr@denx.de>
23951 commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
23952 Author: Michal Simek <monstr@monstr.eu>
23953 Date: Fri Jul 11 11:50:53 2008 +0200
23955 hwmon: Cleaning hwmon devices
23958 Move device specific values to driver for better reading
23960 Signed-off-by: Michal Simek <monstr@monstr.eu>
23961 Acked-by: Stefan Roese <sr@denx.de>
23963 commit c78fce699c7ff467ecd841da6a79f065180bf578
23964 Author: Michal Simek <monstr@monstr.eu>
23965 Date: Fri Jul 11 10:43:13 2008 +0200
23967 FIS: repare incorrect return value with ramdisk handling
23969 Microblaze and PowerPC use boot_get_ramdisk for loading
23970 ramdisk to memory with checking return value.
23971 Return 0 means success. Return 1 means failed.
23972 Here is correspond part of code from bootm.c which check
23975 ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
23976 &rd_data_start, &rd_data_end);
23980 Signed-off-by: Michal Simek <monstr@monstr.eu>
23982 commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
23983 Author: Michal Simek <monstr@monstr.eu>
23984 Date: Fri Jul 11 10:10:32 2008 +0200
23986 microblaze: Remove useless ancient headers
23988 Signed-off-by: Michal Simek <monstr@monstr.eu>
23990 commit 53ea981c3124b13c137c2d10e975b7c6672266e0
23991 Author: Michal Simek <monstr@monstr.eu>
23992 Date: Fri Jul 11 10:10:31 2008 +0200
23994 microblaze: Clean uartlite driver
23996 Redesign uartlite driver to in_be32 and out_be32 macros
23997 Fix missing header in io.h
23999 Signed-off-by: Michal Simek <monstr@monstr.eu>
24000 Acked-by: Grant Likely <grant.likely@secretlab.ca>
24002 commit dbf3dfb386a2d5d2381814e39985ab2e21894550
24003 Author: Marcel Ziswiler <marcel@ziswiler.com>
24004 Date: Fri Jul 11 02:39:14 2008 +0200
24006 Enable passing of ATAGs required by latest Linux kernel.
24008 commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
24009 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24010 Date: Fri Jul 11 10:24:15 2008 -0400
24012 Fix integer overflow warning in calc_divisor()
24014 which happened when rounding the serial port clock divisor
24016 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24018 commit 6b760189d77f001684e3160b355c185ca3804961
24019 Author: Marcel Ziswiler <marcel@ziswiler.com>
24020 Date: Fri Jul 11 01:09:59 2008 +0200
24022 Fix build time warnings in function mmc_decode_csd()
24024 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
24026 commit c15947d6ce0d59925c97fdfac692476af6e262d0
24027 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24028 Date: Thu Jul 10 10:46:33 2008 -0400
24030 ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
24032 caused by missing dcache status/enable/disable functions.
24034 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24036 commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
24037 Author: Stefan Roese <sr@denx.de>
24038 Date: Thu Jul 10 13:53:31 2008 +0200
24040 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
24042 This patch removes some ft_board_setup() functions from some 4xx boards.
24043 This can be done since we now have a default weak implementation for this
24044 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
24045 implementation like canyonlands need their own version.
24047 Signed-off-by: Stefan Roese <sr@denx.de>
24049 commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
24050 Author: Wolfgang Denk <wd@denx.de>
24051 Date: Sun Jul 13 14:58:16 2008 +0200
24053 Add last known maintainer for orphaned boards; reformat.
24055 Signed-off-by: Wolfgang Denk <wd@denx.de>
24057 commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
24058 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24059 Date: Thu Jul 10 13:16:04 2008 +0200
24061 Remove kharris@nexus-tech.net from MAINTAINERS
24063 Mail to kharris@nexus-tech.net bounces because the user doesn't exist
24064 anymore. You can't be a maintainer without a valid e-mail address, so
24065 move all boards that used to be maintained by Kyle Harris to the
24068 Currently, only PowerPC has a list of orphaned boards, so this patch
24069 creates one for ARM as well.
24071 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24073 commit 17bd17071463b0cde391ac4a0863d600474b4ea1
24074 Author: Anatolij Gustschin <agust@denx.de>
24075 Date: Thu Jul 10 01:15:10 2008 +0200
24077 at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
24079 On the at91sam9260ep development board there is an EEPROM
24080 connected to the TWI interface (PA23, PA24 Peripheral A
24081 multiplexing), so we cannot use these pins as ETX2, ETX3.
24082 This patch configures PA10, PA11 pins for ETX2, ETX3
24083 instead of PA23, PA24 pins.
24085 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24086 Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
24088 commit f889265753ddf4465d9d580827bb9289bfac55d6
24089 Author: Kenneth Johansson <kenneth@southpole.se>
24090 Date: Sat Jul 12 13:18:34 2008 -0600
24092 fix DIU for small screens
24094 The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
24095 so it was not possible to set a slow pixel clock and thus prevented
24096 display on small screens.
24098 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
24099 Acked-by: John Rigby <jrigby@freescale.com>
24101 commit b60b8573875e650e4c69be667bfc88d3ed474a7c
24102 Author: John Rigby <jrigby@freescale.com>
24103 Date: Fri Jul 11 14:44:09 2008 -0600
24105 ADS5121 cleanup compile warnings
24107 board/ads5121/iopin.c
24108 Replace bit fields in struct iopin_t with a single
24109 field and intialize it via plain old macros.
24110 This fixes the type pun warnings and makes the code
24113 board/ads5121/ads5121.c
24114 Add include iopin.h to ads5121.c for the iopin_initialize
24117 Add an extern void ads5121_diu_init(void)
24119 Signed-off-by: John Rigby <jrigby@freescale.com>
24121 commit bde63587622c4b830a27d1ddf7265843de9e994f
24122 Author: Wolfgang Denk <wd@denx.de>
24123 Date: Fri Jul 11 22:56:11 2008 +0200
24125 Fix some more printf() format issues.
24127 Signed-off-by: Wolfgang Denk <wd@denx.de>
24129 commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
24130 Author: Wolfgang Denk <wd@denx.de>
24131 Date: Fri Jul 11 22:55:31 2008 +0200
24133 Fixed some out-of-tree build issues
24135 Signed-off-by: Wolfgang Denk <wd@denx.de>
24137 commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
24138 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24139 Date: Wed Jul 9 16:20:23 2008 -0500
24141 ColdFire: Fix FB CS not setup properly for Mcf5282
24143 Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
24144 CFG_CSn_RO is defined as 0, the chipselect will not
24147 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24149 commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
24150 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24151 Date: Wed Jul 9 15:47:27 2008 -0500
24153 ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
24155 Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
24156 clock module in cpu/<cf arch>/cpu_init.c
24158 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24160 commit f94945b517f10e01927101679c62361e03d4e837
24161 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24162 Date: Wed Jul 9 15:25:01 2008 -0500
24164 ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
24166 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24168 commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
24169 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24170 Date: Wed Jul 9 15:21:44 2008 -0500
24172 Fix compile error caused by missing timer function
24174 Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
24176 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24178 commit c37ea031175b807c54e6bad9b270e9bede6c0078
24179 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24180 Date: Wed Jul 9 15:14:25 2008 -0500
24182 Fix compile error caused by incorrect function return type
24184 Rename int mii_init(void) to void mii_init(void)
24186 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24188 commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
24189 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24190 Date: Wed Jun 18 19:27:23 2008 -0500
24192 ColdFire: Fix power up issue for MCF5235
24194 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24196 commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
24197 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24198 Date: Wed Jun 18 19:19:07 2008 -0500
24200 ColdFire: Fix compiling error for MCF5275
24202 The compiling error was caused by missing a closed parentheses
24205 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24207 commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
24208 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24209 Date: Wed Jun 18 19:14:01 2008 -0500
24211 ColdFire: Fix timer issue for MCF5272
24213 The timer was assigned to wrong timer memory mapped which
24214 caused udelay() and timer() not working properly.
24216 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24218 commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
24219 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24220 Date: Wed Jun 18 19:12:13 2008 -0500
24222 ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
24224 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
24226 commit 8371dc2066136be21e10b7b9293e469297d77298
24227 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24228 Date: Wed Jun 18 19:05:23 2008 -0500
24230 ColdFire: Add -got=single param for new linux v4e toolchains
24232 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
24234 commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
24235 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24236 Date: Wed Jun 18 13:21:19 2008 -0500
24238 ColdFire: Fix code flash configuration for M547x/M548x boards
24240 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
24242 commit 6e37091afc07fdcc15590093fd066b0cb7399f85
24243 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24244 Date: Tue Jun 24 12:12:16 2008 -0500
24246 ColdFire: Fix warning messages by passing correct data type in board.c
24248 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24250 commit 81cc32322acb1b3225ee45606ced48e2a14824dc
24251 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24252 Date: Thu May 29 12:21:54 2008 -0500
24254 ColdFire: Fix UART baudrate formula
24256 The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
24257 can generate the wrong divisor due to integer division truncation.
24258 Round the calculated divisor value by adding 1/2 the baudrate
24259 before dividing by the baudrate.
24261 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24262 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
24264 commit b578fb471444cbd7db1285701ba51343baaf73fb
24265 Author: Stefan Roese <sr@denx.de>
24266 Date: Thu Jul 10 11:38:26 2008 +0200
24268 ppc4xx: Fix include sequence in 4xx_pcie.c
24270 This patch now moves common.h to the top of the inlcude list. This
24271 is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
24272 the phys_size_t/phys_addr_t are defined to the correct size in this
24275 Signed-off-by: Stefan Roese <sr@denx.de>
24277 commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
24278 Author: Stefan Roese <sr@denx.de>
24279 Date: Fri Jul 11 13:10:56 2008 +0200
24281 ppc4xx: Fix compile warning in 44x_spd_ddr2.c
24283 Signed-off-by: Stefan Roese <sr@denx.de>
24285 commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
24286 Author: Stefan Roese <sr@denx.de>
24287 Date: Fri Jul 11 11:40:13 2008 +0200
24289 ppc4xx: Fix small korat merge problem
24291 Signed-off-by: Stefan Roese <sr@denx.de>
24293 commit 1d0554736a0a1dd59718acda660871ce56b69e18
24294 Author: Stefan Roese <sr@denx.de>
24295 Date: Fri Jul 11 11:34:52 2008 +0200
24297 ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
24299 Signed-off-by: Stefan Roese <sr@denx.de>
24301 commit 3a82113ed5934d498f25080441a8261fc9454b15
24302 Author: Stefan Roese <sr@denx.de>
24303 Date: Thu Jul 10 16:37:09 2008 +0200
24305 ppc4xx: Add 460SX UIC defines
24307 Only the really needed ones are added (cascading and EMAC/MAL).
24309 Signed-off-by: Stefan Roese <sr@denx.de>
24311 commit 26173fc6f60521c2a8072f652f863617fc11ba9a
24312 Author: Stefan Roese <sr@denx.de>
24313 Date: Mon Jun 30 14:11:07 2008 +0200
24315 ppc4xx: Continue cleanup of ppc440.h
24317 This patch continues the ppc440.h cleanup by removing some of the unused
24320 Signed-off-by: Stefan Roese <sr@denx.de>
24322 commit d9056b7913ed6a228d2f33671d916efedee541dd
24323 Author: Stefan Roese <sr@denx.de>
24324 Date: Mon Jun 30 14:05:05 2008 +0200
24326 ppc4xx: Cleanup Katmai & Yucca PCIe register usage
24328 This patch cleans up the 440SPe PCIe register usage. Now only defines
24329 from the include/asm-ppc/4xx_pcie.h are used.
24331 Signed-off-by: Stefan Roese <sr@denx.de>
24333 commit 5de851403b01489b493fa83137ad990b8ce60d1c
24334 Author: Stefan Roese <sr@denx.de>
24335 Date: Thu Jun 26 17:36:39 2008 +0200
24337 ppc4xx: Rework 440GX UIC handling
24339 This patch reworks the 440GX interrupt handling so that the common 4xx
24340 code can be used. The 440GX is an exception to all other 4xx variants
24341 by having the cascading interrupt vectors not on UIC0 but on a special
24342 UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
24343 the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
24344 handling is simpler without any 440GX special cases.
24346 Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
24348 Signed-off-by: Stefan Roese <sr@denx.de>
24350 commit d1631fe1a05b063ccaf62ea892a8887b829847d1
24351 Author: Stefan Roese <sr@denx.de>
24352 Date: Thu Jun 26 13:40:57 2008 +0200
24354 ppc4xx: Consolidate PPC4xx UIC defines
24356 This 2nd patch now removes all UIC mask bit definition. They should be
24357 generated from the vectors by using the UIC_MASK() macro from now on.
24358 This way only the vectors need to get defined for new PPC's.
24360 Also only the really used interrupt vectors are now defined. This makes
24361 definitions for new PPC versions easier and less error prone.
24363 Another part of this patch is that the 4xx emac driver got a little
24364 cleanup, since now the usage of the interrupts is clearer.
24366 Signed-off-by: Stefan Roese <sr@denx.de>
24368 commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
24369 Author: Stefan Roese <sr@denx.de>
24370 Date: Wed Jun 25 10:59:22 2008 +0200
24372 ppc4xx: Consolidate PPC4xx UIC defines
24374 This patch is the first step to consolidate the UIC related defines in the
24375 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
24376 asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
24379 Signed-off-by: Stefan Roese <sr@denx.de>
24381 commit 7ee2619c20ccecd57966d74d844e6329e141261c
24382 Author: Stefan Roese <sr@denx.de>
24383 Date: Tue Jun 24 17:18:50 2008 +0200
24385 ppc4xx: Consolidate PPC4xx EBC defines
24387 This patch removes all EBC related defines from the PPC4xx headers
24388 ppc405.h and ppc440.h and introduces a new header
24390 include/asm-ppc/ppc4xx-ebc.h
24392 with all those defines.
24394 Signed-off-by: Stefan Roese <sr@denx.de>
24396 commit e321801bed5a6d896d298c00fd20046f039d5d66
24397 Author: Stefan Roese <sr@denx.de>
24398 Date: Thu Jul 10 13:52:44 2008 +0200
24400 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
24402 This patch removes some ft_board_setup() functions from some 4xx boards.
24403 This can be done since we now have a default weak implementation for this
24404 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
24405 implementation like canyonlands need their own version.
24407 Signed-off-by: Stefan Roese <sr@denx.de>
24409 commit 08250eb2edbd96514d049602d9e134110ac3185f
24410 Author: Stefan Roese <sr@denx.de>
24411 Date: Thu Jul 10 15:32:32 2008 +0200
24413 ppc4xx: Fix merge problems in 44x_spd_ddr2.c
24415 Signed-off-by: Stefan Roese <sr@denx.de>
24417 commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
24418 Author: Grant Erickson <gerickson@nuovations.com>
24419 Date: Tue Jul 8 08:35:00 2008 -0700
24421 ppc4xx: Add MII mode support to the EMAC RGMII Bridge
24423 This patch adds support for placing the RGMII bridge on the
24424 PPC405EX(r) into MII/GMII mode and allows a board-specific
24425 configuration to specify the bridge mode at compile-time.
24427 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
24428 Signed-off-by: Stefan Roese <sr@denx.de>
24430 commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
24431 Author: Grant Erickson <gerickson@nuovations.com>
24432 Date: Wed Jul 9 16:46:35 2008 -0700
24434 ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
24436 This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
24437 controller registers (MODT and INITPLR) used by the
24438 PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
24439 peer values used for the INITPLR MR and EMR registers,
24440 respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
24442 With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
24443 Kilauea are replaced by equivalent mnemonics to make it easier to
24444 compare and contrast other 405EX(r)-based boards (e.g. during board
24447 Finally, unified the SDRAM controller register dump routine such that
24448 it can be used across all processor variants that utilize the IBM DDR2
24449 SDRAM controller core. It produces output of the form:
24451 PPC4xx IBM DDR2 Register Dump:
24453 SDRAM_MB0CF[40] = 0x00006701
24456 which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
24457 since it is not uncommon that the DCR values in header files get mixed
24458 up and it helps to validate, at a glance, they match what is printed
24459 in the user manual.
24462 AMCC Kilauea/Haleakala:
24463 - NFS Linux Boot: PASSED
24464 - NAND Linux Boot: PASSED
24466 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
24467 Signed-off-by: Stefan Roese <sr@denx.de>
24469 commit ad7382d828982e9c1bafc4313ef1b666f6145f58
24470 Author: Grant Erickson <gerickson@nuovations.com>
24471 Date: Wed Jul 9 16:31:59 2008 -0700
24473 ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
24475 Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
24476 revision ID DCR based on 405EX, and add field mnemonics for bus error
24477 status and ECC error status registers.
24479 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
24480 Signed-off-by: Stefan Roese <sr@denx.de>
24482 commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
24483 Author: Grant Erickson <gerickson@nuovations.com>
24484 Date: Wed Jul 9 16:31:36 2008 -0700
24486 ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
24488 This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
24490 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
24491 Signed-off-by: Stefan Roese <sr@denx.de>
24493 commit 5b457d00730d4aa0c6450d21a9104723e606fb98
24494 Author: Grant Erickson <gerickson@nuovations.com>
24495 Date: Wed Jul 9 11:55:46 2008 -0700
24497 PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
24499 While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
24500 controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
24501 the 405EX(r), SDRAM_MCSTAT has a different DCR value.
24503 Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
24504 which causes SDRAM initialization to periodically fail since it can
24505 prematurely indicate SDRAM ready status.
24507 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
24508 Signed-off-by: Stefan Roese <sr@denx.de>
24510 commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
24511 Author: Feng Kan <fkan@amcc.com>
24512 Date: Tue Jul 8 22:48:42 2008 -0700
24514 ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
24516 Add AMCC Redwood reference board that uses the latest
24517 PPC 464 CPU processor combined with a rich mix of peripheral
24518 controllers. The board will support PCIe, mutiple Gig ethernet
24519 ports, advanced hardware RAID assistance and IEEE 1588.
24521 Signed-off-by: Feng Kan <fkan@amcc.com>
24522 Signed-off-by: Stefan Roese <sr@denx.de>
24524 commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
24525 Author: Feng Kan <fkan@amcc.com>
24526 Date: Tue Jul 8 22:48:07 2008 -0700
24528 ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
24530 Signed-off-by: Feng Kan <fkan@amcc.com>
24531 Signed-off-by: Stefan Roese <sr@denx.de>
24533 commit 7d30793685efcada183891c78fc892e6c9ba50c7
24534 Author: Feng Kan <fkan@amcc.com>
24535 Date: Tue Jul 8 22:47:31 2008 -0700
24537 ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
24539 Signed-off-by: Feng Kan <fkan@amcc.com>
24540 Signed-off-by: Stefan Roese <sr@denx.de>
24542 commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
24543 Author: Wolfgang Denk <wd@denx.de>
24544 Date: Fri Jul 11 01:16:00 2008 +0200
24546 Fix some more print() format errors.
24548 Signed-off-by: Wolfgang Denk <wd@denx.de>
24550 commit fdd70d1921b87287d9a99d1be99bc35226c2b412
24551 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24552 Date: Thu Jul 10 20:57:54 2008 +0200
24554 MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
24556 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24558 commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
24559 Author: Sergey Lapin <slapin@ossfans.org>
24560 Date: Thu Jun 5 11:06:29 2008 +0400
24562 DataFlash AT45DB021 support
24564 Some boards based on AT91SAM926X-EK use smaller DF chips to keep
24565 bootstrap, u-boot and its environment, using NAND or other external
24566 storage for kernel and rootfs. This patch adds support for
24567 small 1024x263 chip.
24569 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
24571 commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
24572 Author: Kim Phillips <kim.phillips@freescale.com>
24573 Date: Thu Jul 10 14:00:15 2008 -0500
24575 silence misc printf formatting compiler warnings
24577 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24579 commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
24580 Author: Markus Klotzbücher <mk@denx.de>
24581 Date: Thu Jul 10 14:47:09 2008 +0200
24583 USB: shutdown USB before booting
24585 This patch fixes a potentially serious issue related to USB which was
24586 discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
24587 ARM920T. Martin wrote:
24589 Turn off USB to prevent the host controller from writing to the
24590 SDRAM while Linux is booting. This could happen, because the HCCA
24591 (Host Controller Communication Area) lies within the SDRAM and the
24592 host controller writes continously to this area (as busmaster!), for
24593 example to increase the HccaFrameNumber variable, which happens
24596 This is a slightly modified version of the patch in order to shutdown
24597 USB when booting on all architectures.
24599 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
24601 commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
24602 Author: Martha Marx <mmarx@silicontkx.com>
24603 Date: Thu May 29 14:23:25 2008 -0400
24605 Configuration changes for ADS5121 Rev 3
24607 ADS5121 Rev 3 board is now the default config
24609 config targets are now
24614 M41T62 on board RTC
24617 ads5121_rev2_config
24622 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
24623 Acked-by: Grant Likely <grant.likely@secretlab.ca>
24624 Acked-by: John Rigby <jrigby@freescale.com>
24626 commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
24627 Author: Martha Marx <mmarx@silicontkx.com>
24628 Date: Thu May 29 15:37:21 2008 -0400
24630 Consolidate ADS5121 IO Pin configuration
24632 Consolidate ADS5121 IO Pin configuration to one file
24633 board/ads5121/iopin.c.
24635 Remove pin config from cpu/mpc512x/fec.c
24637 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
24638 Acked-by: Grant Likely <grant.likely@secretlab.ca>
24639 Acked-by: John Rigby <jrigby@freescale.com>
24641 commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
24642 Author: Christian Eggers <christian@p2400.wgnetz.xx>
24643 Date: Fri Jun 27 19:46:51 2008 +0200
24645 Fix "usb part" command
24647 Only print partition for selected device if user supplied the <dev>
24648 arg with the "usb part [dev]" command.
24650 Signed-off-by: Christian Eggers <ceggers@gmx.de>
24651 Acked-by: Markus Klotzbuecher <mk@denx.de>
24653 commit cc83b27217f7380041fea386ddb6d6d9b261617d
24654 Author: Harald Welte <laforge@gnumonks.org>
24655 Date: Mon Jul 7 00:58:05 2008 +0800
24657 fix USB devices with multiple configurations
24659 This patch fixes bugs in usbdcore*.c related to the use of devices
24660 with multiple configurations.
24662 The original code made mistakes about the meaning of configuration value and
24663 configuration index, and the resulting off-by-one errors resulted in:
24665 * SET_CONFIGURATION always selected the first configuration, no matter what
24666 wValue is being passed.
24667 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
24668 configuration (index 0).
24670 Signed-off-by: Harald Welte <laforge@openmoko.org>
24671 Acked-by: Markus Klotzbuecher <mk@denx.de>
24673 commit 06c53beae1a726e707971c555613f09b270a2461
24674 Author: Wolfgang Denk <wd@denx.de>
24675 Date: Thu Jul 10 13:16:09 2008 +0200
24677 Fix some more print() format errors.
24679 Signed-off-by: Wolfgang Denk <wd@denx.de>
24681 commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
24682 Author: Christian Eggers <christian@p2400.wgnetz.xx>
24683 Date: Fri Jun 27 19:46:51 2008 +0200
24685 Fix "usb part" command
24687 Only print partition for selected device if user supplied the <dev>
24688 arg with the "usb part [dev]" command.
24690 Signed-off-by: Christian Eggers <ceggers@gmx.de>
24691 Acked-by: Markus Klotzbuecher <mk@denx.de>
24693 commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
24694 Author: Harald Welte <laforge@gnumonks.org>
24695 Date: Mon Jul 7 00:58:05 2008 +0800
24697 fix USB devices with multiple configurations
24699 This patch fixes bugs in usbdcore*.c related to the use of devices
24700 with multiple configurations.
24702 The original code made mistakes about the meaning of configuration value and
24703 configuration index, and the resulting off-by-one errors resulted in:
24705 * SET_CONFIGURATION always selected the first configuration, no matter what
24706 wValue is being passed.
24707 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
24708 configuration (index 0).
24710 Signed-off-by: Harald Welte <laforge@openmoko.org>
24711 Acked-by: Markus Klotzbuecher <mk@denx.de>
24713 commit e870690bdca154943ecadd5212d2d59c1b9d391b
24714 Author: Stefan Roese <sr@denx.de>
24715 Date: Thu Jul 10 10:10:54 2008 +0200
24717 MTD/NAND: Fix printf format warning in nand code
24719 This patch fixes NAND related printf format warning. Those warnings are
24720 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
24721 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
24724 Signed-off-by: Stefan Roese <sr@denx.de>
24726 commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
24727 Author: Stefan Roese <sr@denx.de>
24728 Date: Thu Jul 10 10:00:45 2008 +0200
24730 rtc: Fix printf format warning in m41t60.c
24732 Signed-off-by: Stefan Roese <sr@denx.de>
24734 commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
24735 Author: Stefan Roese <sr@denx.de>
24736 Date: Tue Jul 8 12:01:47 2008 +0200
24738 pci: Move PCI device configuration check into a separate weak function
24740 This patch moves the check, if a device should be skipped in PCI PNP
24741 configuration into the function pci_skip_dev(). This function is defined
24742 as weak so that it can be overwritten by a platform specific one if
24743 needed. The check if the device should get printed in the PCI summary upon
24744 bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
24745 pci_print_dev() which is also defined as weak too.
24747 Signed-off-by: Stefan Roese <sr@denx.de>
24749 commit b002144e1dc21374b1ef5281fe6b5d014af96650
24750 Author: Stefan Roese <sr@denx.de>
24751 Date: Thu Jul 10 09:58:06 2008 +0200
24753 ppc4xx: Fix printf format warnings now visible with the updated format check
24755 This patch fixes ppc4xx related printf format warning. Those warnings are
24756 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
24757 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
24760 Signed-off-by: Stefan Roese <sr@denx.de>
24762 commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
24763 Author: Stefan Roese <sr@denx.de>
24764 Date: Wed Jul 9 17:33:57 2008 +0200
24766 ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
24768 Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
24769 To support such configurations, we "only" map the first 2GB via the TLB's. We
24770 need some free virtual address space for the remaining peripherals like, SoC
24771 devices, FLASH etc.
24773 Note that ECC is currently not supported on configurations with more than 2GB
24774 SDRAM. This is because we only map the first 2GB on such systems, and therefore
24775 the ECC parity byte of the remaining area can't be written.
24777 Signed-off-by: Stefan Roese <sr@denx.de>
24779 commit cf1c2ed91df26903b956948f37f82de9e1158a89
24780 Author: Larry Johnson <lrj@acm.org>
24781 Date: Sat Jun 14 17:02:49 2008 -0400
24783 ppc4xx: Remove implementation of testdram() from Korat board support
24785 Signed-off-by: Larry Johnson <lrj@acm.org>
24786 Signed-off-by: Stefan Roese <sr@denx.de>
24788 commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
24789 Author: Larry Johnson <lrj@acm.org>
24790 Date: Sat Jun 14 16:53:02 2008 -0400
24792 ppc4xx: Update and add FDT to Korat board support
24794 Signed-off-by: Larry Johnson <lrj@acm.org>
24795 Signed-off-by: Stefan Roese <sr@denx.de>
24797 commit 4188f0491886b3b486164e819c0a83fdb97efd7d
24798 Author: Wolfgang Denk <wd@denx.de>
24799 Date: Thu Jul 10 01:13:30 2008 +0200
24801 Minor coding style cleanup; update CHANGELOG
24803 Signed-off-by: Wolfgang Denk <wd@denx.de>
24805 commit 8915f1189c1d29d8be7f4de325702d90a8988219
24806 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
24807 Date: Wed Jul 9 17:50:45 2008 -0400
24809 e1000: add support for 82545GM 64bit PCI-X copper variant
24811 This PCI-X e1000 variant works by just adding in the correct
24812 PCI IDs in the appropriate places.
24814 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
24816 commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
24817 Author: Daniel Hellstrom <daniel@gaisler.com>
24818 Date: Wed Jul 9 12:34:11 2008 +0000
24820 SPARC: Build error fix
24822 (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
24824 This patch makes SPARC targets build again. It is caused by
24825 phys_addr_t and phys_size_t being defined in the wrong header
24826 file. include/lmb.h need those typedefs to build.
24828 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
24830 commit 11ccc33fa21acce108f6b4a6936e3271af904c64
24831 Author: Marcel Ziswiler <marcel@ziswiler.com>
24832 Date: Wed Jul 9 08:17:15 2008 +0200
24834 Many spelling fixes in README.
24836 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
24838 commit dbab0691d2533560f7e91b92ae844046a9ad1df3
24839 Author: Marcel Ziswiler <marcel@ziswiler.com>
24840 Date: Wed Jul 9 08:17:06 2008 +0200
24842 Minor spelling fix in comment.
24844 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
24846 commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
24847 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24848 Date: Tue Jul 8 14:54:58 2008 -0400
24850 Round the serial port clock divisor value returned by calc_divisor()
24852 Round the serial port clock divisor value returned by
24855 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24856 Signed-off-by: John Roberts <john.roberts@pwav.com>
24858 commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
24859 Author: Scott Wood <scottwood@freescale.com>
24860 Date: Wed Jul 9 17:47:52 2008 -0500
24862 NAND: ifdef-protect most of nand.h when using legacy NAND.
24864 Some macros such as NAND_CTL_SETALE conflict between current and legacy
24865 NAND, being defined by the subsystem in the former case and the board
24866 config file in the latter.
24868 Signed-off-by: Scott Wood <scottwood@freescale.com>
24870 commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
24871 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24872 Date: Tue Jul 8 11:02:05 2008 -0400
24874 ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
24876 ARM: Fix for incorrect version of patch applied when
24877 adding support for the Lyrtech SFF-SDR board.
24879 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
24880 Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
24882 commit 47042b363ee5022b8180c65d3f4558e7972c79cd
24883 Author: Kyungmin Park <kmpark@infradead.org>
24884 Date: Tue Jul 8 09:08:40 2008 +0900
24886 Remove useless print message at apollon
24888 Remove useless print message at apollon
24890 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
24892 commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
24893 Author: Andy Fleming <afleming@freescale.com>
24894 Date: Mon Jul 7 14:24:39 2008 -0500
24896 Fix LMB type issues
24898 The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple
24899 of casting problems in the bootm code that called the LMB functions.
24901 Signed-off-by: Andy Fleming <afleming@freescale.com>
24903 commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
24904 Author: Kumar Gala <galak@kernel.crashing.org>
24905 Date: Mon Jul 7 09:39:06 2008 -0500
24907 Fix compiler warnings
24909 gcc-4.3.x generates the following:
24911 bootm.c: In function 'do_bootm_linux':
24912 bootm.c:208: warning: cast from pointer to integer of different size
24913 bootm.c:215: warning: cast from pointer to integer of different size
24915 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24917 commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
24918 Author: Harald Welte <laforge@gnumonks.org>
24919 Date: Mon Jul 7 15:40:39 2008 +0800
24921 Remove code duplication for setting the default environment
24923 common/env_common.c (default_env): new function that resets the environment to
24925 common/env_common.c (env_relocate): use default_env instead of own copy
24926 common/env_nand.c (env_relocate_spec): use default_env instead of own copy
24927 include/environment.h: added default_env prototype
24929 Signed-off-by: Werner Almesberger <werner@openmoko.org>
24930 Signed-off-by: Harald Welte <laforge@openmoko.org>
24932 commit 99c2b434d37863df5dda5207a53760c6506fc2be
24933 Author: Marcel Ziswiler <marcel@ziswiler.com>
24934 Date: Sun Jun 22 16:13:46 2008 +0200
24936 NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
24938 The writeenv() and readenv() calls introduced by the recently added bad block
24939 management for environment variables were missing casts therefore producing
24940 compile time warnings.
24941 While at it fixing some typo in a comment and indentation.
24943 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
24944 Signed-off-by: Scott Wood <scottwood@freescale.com>
24946 commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
24947 Author: Scott Wood <scottwood@freescale.com>
24948 Date: Fri Jun 20 12:38:57 2008 -0500
24950 NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
24952 This is particularly problematic now that non-NAND-specific code is
24953 including <nand.h>, and thus all debugging code is being compiled
24954 regardless of whether it was requested, as reported by Scott McNutt
24955 <smcnutt@psyent.com>.
24957 Signed-off-by: Scott Wood <scottwood@freescale.com>
24959 commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
24960 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24961 Date: Thu Jun 12 19:27:58 2008 +0200
24963 mmc: Move atmel_mci driver into drivers/mmc
24965 This makes it easier to use the driver on other platforms.
24967 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24968 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24970 commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
24971 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24972 Date: Thu Jun 12 19:27:57 2008 +0200
24974 avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
24976 After we move the atmel_mci driver into drivers/mmc, we can't select
24977 it with CONFIG_MMC anymore. Introduce a new symbol specifically for
24978 this driver so that there's no ambiguity.
24980 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24981 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24983 commit 5ce13051a48c62bda9723df3b4778c492fb47f36
24984 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24985 Date: Thu Jun 12 19:27:56 2008 +0200
24987 Create drivers/mmc subdirectory
24989 In order to consolidate more of the various MMC drivers around the
24990 tree, we must first have a common place to put them.
24992 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
24993 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24995 commit b502611b51f02718c2d1117d4981dabceb5af6de
24996 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
24997 Date: Sun Jul 6 12:30:09 2008 +0200
24999 Change env_get_char from a global function ptr to a function
25001 This avoids an early global data reference.
25003 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
25005 commit 27269417ade432189b234d9fbac98b54e37b978c
25006 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
25007 Date: Sun Jul 6 13:57:58 2008 +0400
25009 Some copy-n-paste fixes in printf usage
25011 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
25013 commit 0e6989b9faf1588e8723535539e88a0df3c71356
25014 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
25015 Date: Sun Jul 6 13:57:00 2008 +0400
25017 FDT memory and pci node fixes for MPC8260ADS
25019 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
25021 commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
25022 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
25023 Date: Mon Jul 7 06:41:14 2008 -0700
25027 The compiler will help find mismatches between printf formats and
25028 arguments if you let it. This patch adds the necessary attributes to
25029 declarations in include/common.h, then begins to correct the resulting
25030 compiler warnings. Some of these were bugs, e.g., "$d" instead of
25031 "%d" and incorrect arguments. Others were just annoying, like
25032 int-long mismatches on a system where both are 32 bits. It's worth
25033 fixing the annoying errors to catch the real ones.
25035 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
25037 commit 417faf285b2527acb2de24c5cd3e2621d385408c
25038 Author: Becky Bruce <becky.bruce@freescale.com>
25039 Date: Wed Jul 9 11:09:41 2008 -0500
25041 Allow print_size to print in GB
25043 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
25045 commit e7c374529c87525c9aa463e0557c287887ae4e9e
25046 Author: Jason McMullan <mcmullan@netapp.com>
25047 Date: Sun Jun 8 23:56:00 2008 -0400
25049 mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
25051 Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
25052 they are set in the U-Boot environment.
25054 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
25055 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
25057 commit 0192d7d56e9320819dea262f49789ae18fdd2c72
25058 Author: Stefan Roese <sr@denx.de>
25059 Date: Tue Jul 8 12:57:14 2008 +0200
25061 jedec_flash: Fix AM29DL800BB device ID
25063 As pointed out by Jerry Hicks, this patch corrects the device ID of
25064 the Spansion AM29DL800BB NOR device. Verified against latest Spansion
25065 datasheet (rev C4 from Dezember 2006).
25067 Signed-off-by: Stefan Roese <sr@denx.de>
25069 commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
25070 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25071 Date: Mon Jul 7 11:22:37 2008 +0900
25073 sh: Fix compile error sh7763rdp board
25075 Disable SH ether driver.
25077 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25079 commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
25080 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25081 Date: Tue Jul 8 12:03:24 2008 +0900
25083 sh: Fix SH-boards compile error
25085 By Cleanup out-or-tree building for some boards (.depend)
25086 (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
25087 because filse ware changed, some SH-boards have compile error.
25088 I revised this problem.
25090 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25092 commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
25093 Author: Jason Jin <Jason.jin@freescale.com>
25094 Date: Tue May 13 11:50:36 2008 +0800
25096 Feed the watchdog in u-boot for 8610 board.
25098 The watchdog on 8610 board is enabled by setting sw[6]
25099 to on. Once enabled, the watchdog can not be disabled
25100 by software. So feed the dog in u-boot is necessary for
25103 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
25105 commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
25106 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25107 Date: Wed Jun 18 12:10:33 2008 -0400
25109 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
25111 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
25113 Remove duplicate code in a if/else block in
25114 cpu/arm926ejs/davinci/lxt972.c.
25115 Fixed style issues.
25117 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25118 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25120 commit fec61431a003f5778bafa2624073a571af8bec9f
25121 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25122 Date: Wed Jun 18 12:10:31 2008 -0400
25124 Remove duplicate definitions in include/lxt971a.h.
25126 Remove duplicate definitions in include/lxt971a.h.
25128 Remove duplicate registers and bits definitions in
25129 include/lxt971a.h for standard MII registers, and
25130 use values in include/miiphy.h instead.
25132 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25133 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25135 commit 9751ee0990f467941da0b095a4e995f863672d7a
25136 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25137 Date: Wed Jun 11 21:05:00 2008 +0900
25139 net: sh: Renesas SH7763 Ethernet device support
25141 Renesas SH7763 has 2 channel Ethernet device.
25142 This is 10/100/1000 Base support.
25143 But this patch check 10/100 Base only.
25145 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25146 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25148 commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
25149 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25150 Date: Tue Jun 17 16:28:05 2008 +0900
25152 sh: Update Renesas R2DPlus board
25154 New NOR Flash board support and remove old type flash board config.
25155 And Remove network setting from config file.
25157 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25158 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25160 commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
25161 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25162 Date: Tue Jun 17 16:28:01 2008 +0900
25164 sh: Update Renesas R7780MP board
25166 New NOR Flash board support and remove network setting from config file.
25168 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25169 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25171 commit c001cd604e9f133743effbddb1c215b48e761c5a
25172 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25173 Date: Tue Jun 17 16:27:56 2008 +0900
25175 sh: Update Renesas Migo-R board
25177 Remove network setting from config file.
25179 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25180 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25182 commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
25183 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25184 Date: Tue Jun 17 16:27:52 2008 +0900
25186 sh: Update Hitachi MS7722SE board
25188 Remove network setting from config file.
25190 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25191 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25193 commit 26209e48e8791670c93108029a5c31a30016c6df
25194 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25195 Date: Tue Jun 17 16:27:48 2008 +0900
25197 sh: Cleanup source code of SH7763RDP
25199 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25200 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25202 commit 5cd5b2c96ef0025762931349d350287aec03ab47
25203 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25204 Date: Tue Jun 17 16:27:44 2008 +0900
25206 sh: Cleanup source code of R2DPlus
25208 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25209 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25211 commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
25212 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25213 Date: Tue Jun 17 16:27:41 2008 +0900
25215 sh: Cleanup source code of R7780MP
25217 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25218 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25220 commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
25221 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25222 Date: Tue Jun 17 16:27:38 2008 +0900
25224 sh: Cleanup source code of MS7722SE
25226 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25227 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25229 commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
25230 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25231 Date: Tue Jun 17 16:27:34 2008 +0900
25233 sh: Cleanup source code of MS7720SE
25235 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25236 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25238 commit 3ab4827cbe409488ebea1a2ee5094783f2672214
25239 Author: Wolfgang Denk <wd@denx.de>
25240 Date: Mon Jul 7 00:45:03 2008 +0200
25242 SH: fix out of tree building
25244 Signed-off-by: Wolfgang Denk <wd@denx.de>
25246 commit 9047bfa1e737d787be460387dd6f45737eeceb10
25247 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25248 Date: Thu Jul 3 23:16:06 2008 +0900
25250 net: smc911x: Fix typo
25252 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
25254 commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
25255 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
25256 Date: Wed Jul 2 18:54:08 2008 +0200
25258 update mvBL-M7 board config
25260 update mvBL-M7 config file to use UBOOT_VERSION and define
25263 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
25265 commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
25266 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25267 Date: Mon Jun 30 17:45:01 2008 +0900
25269 net: fix compile problem in smc911x driver.
25271 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25272 Acked-by: Ben Warren <biggerbadderben@gmail.com>
25274 commit 9fea65a6c469b1b474b27446feb58738baba2d31
25275 Author: Michal Simek <monstr@monstr.eu>
25276 Date: Tue Jun 24 09:54:09 2008 +0200
25278 ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
25280 This change helps with better handling with others
25281 Xilinx based platform.
25283 Signed-off-by: Michal Simek <monstr@monstr.eu>
25284 Acked-by: Stefan Roese <sr@denx.de>
25286 commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
25287 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25288 Date: Tue Jun 17 13:07:11 2008 +0900
25290 net: ne2000: Move dev_addr variable from grobal to local.
25292 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25293 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25295 commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
25296 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25297 Date: Tue Jun 17 13:07:15 2008 +0900
25299 net: ne2000: Fix compile error of NE2000
25301 If enable DEBUG, can not compile ne2000 driver.
25303 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
25304 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25306 commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
25307 Author: Ben Warren <biggerbadderben@gmail.com>
25308 Date: Mon Jun 23 22:57:27 2008 -0700
25310 Add mechanisms for CPU and board-specific Ethernet initialization
25312 This patch is the first step in cleaning up net/eth.c, by moving Ethernet
25313 initialization to CPU or board-specific code. Initial implementation is
25314 only on the Freescale TSEC controller, but others will be added soon.
25316 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25318 commit 7754f2be5d1835d263aad21b5a629526f3e680b0
25319 Author: Wolfgang Denk <wd@denx.de>
25320 Date: Sun Jul 6 01:21:46 2008 +0200
25322 include/sha256.h: fix file permissions.
25324 Signed-off-by: Wolfgang Denk <wd@denx.de>
25326 commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
25327 Author: Patrice Vilchez <patrice.vilchez@atmel.com>
25328 Date: Tue May 27 11:15:29 2008 +0200
25330 [AT91SAM9] Fix NAND FLASH timings
25332 Fix NAND FLASH timings for at91sam9x evaluation kits.
25334 New timings are based on application note
25335 "NAND Flash Support on AT91SAM9 Microcontrollers" available at
25336 http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
25338 Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
25339 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25340 Acked-by: Stelian Pop <stelian@popies.net>
25342 commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
25343 Author: Stelian Pop <stelian@popies.net>
25344 Date: Thu May 22 00:15:40 2008 +0200
25346 Fix boot from NOR due to incorrect reset delay.
25348 AT91 RSTC registers are battery-backuped, so their values
25349 are not reset across power cycles. One of those registers,
25350 the AT91_RSTC_MR register, is being modified by U-Boot, in
25351 the ethernet initialisation routine, to generate a 500ms
25354 Unfortunately, this value is not being restored afterwards,
25355 causing subsequent resets to also last for 500ms.
25357 This long reset sequence causes problems (at least) in the
25358 boot sequence from NOR: by the time the CPU tries to load
25359 a program from the NOR flash, the latter is still in reset
25360 and not yet available.
25362 Additionaly, this patch fixes a bug in the original code which
25363 caused the reset delay to last for 2s instead of 500ms.
25365 Signed-off-by: Stelian Pop <stelian@popies.net>
25366 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25368 commit f492dd636fbbae529e17533995bc6e5813c007f6
25369 Author: Wolfgang Denk <wd@denx.de>
25370 Date: Fri Jul 4 20:11:49 2008 +0200
25374 Signed-off-by: Wolfgang Denk <wd@denx.de>
25376 commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
25377 Author: Wolfgang Denk <wd@denx.de>
25378 Date: Fri Jul 4 20:07:35 2008 +0200
25380 CCM/SCM boards: fix out of tree building
25382 Signed-off-by: Wolfgang Denk <wd@denx.de>
25384 commit ab4c3a490df9a964711556d2a05b0c787db45fde
25385 Author: Wolfgang Denk <wd@denx.de>
25386 Date: Thu Jul 3 23:22:27 2008 +0200
25388 SCM board: fix build errors.
25390 Signed-off-by: Wolfgang Denk <wd@denx.de>
25392 commit a566466f17ba0e2d2b6c250e77da678fb932470d
25393 Author: Wolfgang Denk <wd@denx.de>
25394 Date: Thu Jul 3 23:06:36 2008 +0200
25396 IAD210 board: fix ``"ALIGN" redefined'' warning.
25398 Signed-off-by: Wolfgang Denk <wd@denx.de>
25400 commit ad756314797c16fa5dca23e115aab881011f164f
25401 Author: Wolfgang Denk <wd@denx.de>
25402 Date: Thu Jul 3 23:00:24 2008 +0200
25404 CCM board: fix build errors.
25406 Signed-off-by: Wolfgang Denk <wd@denx.de>
25408 commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
25409 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
25410 Date: Wed Jul 2 18:54:08 2008 +0200
25412 update mvBL-M7 board config
25414 update mvBL-M7 config file to use UBOOT_VERSION.
25416 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
25417 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25419 commit ced209c50e80c25f13c083099b05044048d21f4f
25420 Author: Wolfgang Denk <wd@denx.de>
25421 Date: Thu Jul 3 22:39:21 2008 +0200
25423 sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
25425 Signed-off-by: Wolfgang Denk <wd@denx.de>
25427 commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
25428 Author: Wolfgang Denk <wd@denx.de>
25429 Date: Thu Jul 3 22:34:08 2008 +0200
25431 Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
25433 Signed-off-by: Wolfgang Denk <wd@denx.de>
25435 commit 730f298485984b011b6ee8f4acb511cb45a843dd
25436 Author: Wolfgang Denk <wd@denx.de>
25437 Date: Thu Jul 3 22:04:17 2008 +0200
25439 lmb: fix "implicit declaration of function 'lmb_free'" warning
25441 Signed-off-by: Wolfgang Denk <wd@denx.de>
25443 commit 322ef5e28d2dc62571afc699b00add22a8e006e4
25444 Author: Wolfgang Denk <wd@denx.de>
25445 Date: Wed Jul 2 23:53:23 2008 +0200
25447 Cleanup: remove redundant deleting on *~ files
25449 Signed-off-by: Wolfgang Denk <wd@denx.de>
25451 commit c8a3b109f07f02342d097b30908965f7261d9f15
25452 Author: Wolfgang Denk <wd@denx.de>
25453 Date: Wed Jul 2 23:49:18 2008 +0200
25455 Cleanup out-or-tree building for some boards (.depend)
25457 Signed-off-by: Wolfgang Denk <wd@denx.de>
25459 commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
25460 Author: Wolfgang Denk <wd@denx.de>
25461 Date: Wed Jul 2 23:38:50 2008 +0200
25463 Cleanup: fix out-of-tree building for some boards
25465 Signed-off-by: Wolfgang Denk <wd@denx.de>
25467 commit 461fa68d20861811487944d22291db5a13410e20
25468 Author: Wolfgang Denk <wd@denx.de>
25469 Date: Wed Jul 2 23:00:14 2008 +0200
25471 Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
25473 Signed-off-by: Wolfgang Denk <wd@denx.de>
25475 commit 5981ebd32017e062b08aa6747cf591276f2db779
25476 Author: Detlev Zundel <dzu@denx.de>
25477 Date: Fri Jun 20 22:26:24 2008 +0200
25479 fdt: Fix typo in variable name.
25481 Signed-off-by: Detlev Zundel <dzu@denx.de>
25483 commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
25484 Author: Gary Jennejohn <garyj@denx.de>
25485 Date: Thu Jun 19 11:11:19 2008 +0200
25487 Add logos for RRvision board
25489 Signed-off-by: Gary Jennejohn <garyj@denx.de>
25491 commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
25492 Author: Esben Haabendal <EsbenHaabendal@gmail.com>
25493 Date: Wed Jun 18 11:03:57 2008 +0200
25495 mpc8260: add fdt_fixup_ethernet support
25497 Add support for updating mac-address and local-mac-address in fdt for
25498 all MPC8260 targets.
25500 Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
25502 commit f6a69559d64498a04e1e0b087a9b920e5775f866
25503 Author: Steven A. Falco <sfalco@harris.com>
25504 Date: Thu Jun 12 13:24:42 2008 -0400
25506 cmd_nvedit.c: clean up syntax highlighting
25508 My text-editor (vim) has a bit of trouble syntax-highlighting the
25509 cmd_nvedit.c file, because it apparently does not parse C
25510 ifdef/else/endif. The following patch does not change the behavior of
25511 the code at all, but does allow the editor to properly
25512 syntax-highlight the file.
25514 Signed-off-by: Steve Falco <sfalco@harris.com>
25516 commit 75678c807a6272ecc5541eb32898c93887f08400
25517 Author: Steven A. Falco <sfalco@harris.com>
25518 Date: Thu Jun 12 13:22:12 2008 -0400
25520 Make setenv() return status
25522 Currently, the setenv function does not return an error code.
25523 This patch allows to test for errors.
25525 Signed-off-by: Steve Falco <sfalco@harris.com>
25527 commit 4928e97c8531283ca9b368b7c29a8a12e726562a
25528 Author: Kumar Gala <galak@kernel.crashing.org>
25529 Date: Wed Jun 11 10:14:06 2008 -0500
25531 PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
25533 fls64, __ilog2_u64, ffs64 are variants that work on an u64,
25534 and fls is used to implement them.
25536 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25538 commit 83002a77cbdf383015ca384eff5fa31722d8e571
25539 Author: Magnus Lilja <lilja.magnus@gmail.com>
25540 Date: Mon Jun 9 22:58:48 2008 +0200
25542 i.MX31: Cleanup comments in lowlevel_init.S.
25544 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
25546 commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
25547 Author: Ben Warren <biggerbadderben@gmail.com>
25548 Date: Sun Jun 8 23:28:33 2008 -0700
25550 Move conditional compilation of MPC8XXX SPI driver to Makefile
25552 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
25554 commit d92ea21bafb674ee2bf27447970b047845e7b0a2
25555 Author: Juergen Kilb <J.Kilb@gmx.de>
25556 Date: Sun Jun 8 17:59:53 2008 +0200
25558 i.MX31: fixed CTRL-C detection
25560 The Register URXD contains status information in bits [15..8].
25561 With status bit 15 set, CTRL-C was reported as 0x8003 instead
25562 of 0x03. Therefore CTRL-C was not detected.
25563 To solve this, bits [15..8] were masked out now.
25565 Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
25566 Acked-by: Felix Radensky <felix@embedded-sol.com>
25568 commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
25569 Author: Stefan Roese <sr@denx.de>
25570 Date: Tue Jul 1 17:03:19 2008 +0200
25572 ppc4xx: Fix 460EX/GT PCIe port initialization
25574 This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
25575 configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
25578 Signed-off-by: Stefan Roese <sr@denx.de>
25580 commit b571afde0295b007a45055ee49f8822c753a5651
25581 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25582 Date: Sat Jun 7 12:29:52 2008 +0200
25586 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25587 Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
25589 commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
25590 Author: Marian Balakowicz <m8@semihalf.com>
25591 Date: Fri Jun 6 23:07:40 2008 +0200
25593 Delay FIT format check on sector based devices
25595 Global FIT image operations like format check cannot be performed on
25596 a first sector data, defer them to the point when whole FIT image was
25597 uploaded to a system RAM.
25599 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
25600 Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
25601 NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
25603 commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
25604 Author: Dave Liu <r63238@freescale.com>
25605 Date: Tue Jun 3 17:38:19 2008 +0800
25607 sata: wait for device updating signature to host
25609 The driver need wait for the device updating signature to host.
25610 If we don't wait for it, the driver can not detect the device(disk)
25611 when the system powers up.
25613 Signed-off-by: Dave Liu <daveliu@freescale.com>
25615 commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
25616 Author: Stefan Roese <sr@denx.de>
25617 Date: Sat Jun 28 14:56:17 2008 +0200
25619 ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
25621 This patch implements a fix provided by AMCC so that the lockup upon
25622 simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
25625 Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
25626 (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
25627 USB 2.0 host and SATA.
25629 This errata is not officially available yet. I'll update the comment
25630 to add the errata number later.
25632 Signed-off-by: Stefan Roese <sr@denx.de>
25634 commit 8b616edb118e37d05f6401389eaee1c636b22828
25635 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
25636 Date: Mon Jun 2 16:42:19 2008 -0400
25638 serial_pl010.c: add watchdog support
25640 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
25642 commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
25643 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
25644 Date: Mon Jun 2 16:40:08 2008 -0400
25646 jffs2_1pass.c: add watchdog support
25648 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
25650 commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
25651 Author: Sascha Laue <sascha.laue@liebherr.com>
25652 Date: Fri May 30 09:48:14 2008 +0200
25654 Configure DSP POST; add watchdog reset to diag command
25656 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
25658 commit f13526517859bf6b573e23ff47199e107d1009b5
25659 Author: Tor Krill <tor@excito.com>
25660 Date: Thu May 29 10:40:17 2008 +0200
25662 Add sata sil3114 support
25664 Signed-off-by: Tor Krill <tor@excito.com>
25666 commit e093a247628228100f405b6d7f6b1bfc16141938
25667 Author: Wolfgang Denk <wd@denx.de>
25668 Date: Sat Jun 28 23:34:37 2008 +0200
25670 Coding Style Cleanup
25672 Signed-off-by: Wolfgang Denk <wd@denx.de>
25674 commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
25675 Author: Wolfgang Denk <wd@denx.de>
25676 Date: Sat Jun 28 23:16:01 2008 +0200
25680 Signed-off-by: Wolfgang Denk <wd@denx.de>
25682 commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
25683 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25684 Date: Wed May 21 13:58:41 2008 -0400
25686 ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
25688 This patch adds support for the Lyrtech SFF-SDR board,
25689 based on the TI DaVinci architecture (ARM926EJS).
25691 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
25692 Signed-off-by: Philip Balister <philip@balister.org>
25693 Signed-off-by: Wolfgang Denk <wd@denx.de>
25695 commit 341188b9ccaa8d4462d772cc067aca8d7618633a
25696 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25697 Date: Thu May 22 11:09:59 2008 +0200
25699 MMC: Consolidate MMC/SD command definitions
25701 This moves the MMC and SD Card command definitions from
25702 include/asm/arch/mmc.h into include/mmc.h. These definitions are
25703 given by the MMC and SD Card standards, not by any particular
25706 There's a lot more room for consolidation in the MMC drivers which
25707 I'm hoping to get done eventually, but this patch is a start.
25709 Compile-tested for all avr32 boards as well as lpc2292sodimm and
25710 lubbock. This should cover all three mmc drivers in the tree.
25712 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25714 commit fa60edfc4c952626e048c0e065f654b3c1822fa5
25715 Author: Kyungmin Park <kmpark@infradead.org>
25716 Date: Wed May 21 14:38:08 2008 +0900
25718 Use better Ethernet timings for apollon board
25720 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
25722 commit 41c5eaa7253ed82bbae1eda5667755872c615164
25723 Author: Andy Fleming <afleming@freescale.com>
25724 Date: Mon Jun 16 13:58:56 2008 -0500
25726 Resize device tree to allow space for board changes and the chosen node
25728 Current code requires that a compiled device tree have space added to the end to
25729 leave room for extra nodes added by board code (and the chosen node). This
25730 requires that device tree creators anticipate how much space U-Boot will add to
25731 the tree, which is absurd. Ideally, the code would resize and/or relocate the
25732 tree when it needed more space, but this would require a systemic change to the
25733 fdt code, which is non-trivial. Instead, we resize the tree inside
25734 boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
25735 where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
25737 Signed-off-by: Andy Fleming <afleming@freescale.com>
25739 commit 7570a9941fc565922078679a72d246fe208d696d
25740 Author: Andy Fleming <afleming@freescale.com>
25741 Date: Mon Jun 16 13:58:55 2008 -0500
25743 Fix an underflow bug in __lmb_alloc_base
25745 __lmb_alloc_base can underflow if it fails to find free space. This was fixed
25746 in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
25747 merely updates __lmb_alloc_base to resemble the current version in Linux.
25749 Signed-off-by: Andy Fleming <afleming@freescale.com>
25751 commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
25752 Author: Andy Fleming <afleming@freescale.com>
25753 Date: Mon Jun 16 13:58:54 2008 -0500
25757 lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
25758 lmb_reserve to temporarily reserve some memory.
25760 Signed-off-by: Andy Fleming <afleming@freescale.com>
25762 commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
25763 Author: Andy Fleming <afleming@freescale.com>
25764 Date: Mon Jun 16 13:58:53 2008 -0500
25768 ALIGN() returns the smallest aligned value greater than the passed
25769 in address or size. Taken from Linux.
25771 Signed-off-by: Andy Fleming <afleming@freescale.com>
25773 commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
25774 Author: Stefan Roese <sr@denx.de>
25775 Date: Tue Jun 24 17:15:22 2008 +0200
25777 ppc4xx: Fix compilation problems with phys_size_t
25779 This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
25780 board specific files where it has been missing.
25782 Signed-off-by: Stefan Roese <sr@denx.de>
25784 commit 28eab0d77352b84885f938759bf2612b7bf0bc44
25785 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
25786 Date: Mon May 19 12:26:38 2008 +0200
25788 Conditionally add -fno-stack-protector to CFLAGS
25790 When compile-testing on powerpc, I get errors like this:
25792 net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
25794 This seems to be because -fstack-protector is on by default, so
25795 let's explicitly disable it on all architectures that support the
25798 The Ubuntu toolchain is affected by this problem, and according to
25799 Mike Frysinger, Gentoo has been running with SSP enabled for years.
25800 More and more distros are turning SSP on by default, so this problem
25801 is likely to get worse in the future.
25803 Also, powerpc just happens to be one of the arches I do
25804 compile-testing on. There may be other arches affected by this too.
25806 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
25808 commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
25809 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25810 Date: Sun May 18 19:09:52 2008 +0200
25812 pcmcia/ti_pci1410a: Move compile condition to the Makefile
25814 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25816 commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
25817 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25818 Date: Sun May 18 19:09:51 2008 +0200
25820 pxa_pcmcia: Move compile condition to the Makefile
25822 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25824 commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
25825 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25826 Date: Sun May 18 19:09:50 2008 +0200
25828 marabun_pcmcia: Move compile condition to the Makefile
25830 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25832 commit 6a19c46cae43c16c528eddefae3db97134f1915d
25833 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
25834 Date: Mon Jun 23 13:25:34 2008 +0200
25836 fix non-working mvBL-M7
25838 Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
25840 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
25841 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25843 commit 846f1574ddddeda2bc227655e687308695f41cdc
25844 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
25845 Date: Mon Jun 23 11:40:56 2008 +0200
25847 fix system config overwrite @ MPC834x and MPC8313
25849 During 83xx setup the "System I/O configuration register high" gets
25850 overwritten with user defined value if CFG_SICRH is defined.
25852 Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
25853 must keep their reset value regardless of configuration.
25855 On my board (using RGMII) those bits are set after reset - yet it's
25856 unclear where they come from.
25858 The patch keeps both bits on MPC834x and MPC8313.
25860 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
25861 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25863 commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
25864 Author: Kim Phillips <kim.phillips@freescale.com>
25865 Date: Tue Jun 17 17:45:27 2008 -0500
25867 mpc83xx: move CPU_TYPE_ENTRY over to processor.h
25871 cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
25872 In file included from cpu.c:33:
25873 /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
25875 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25877 commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
25878 Author: Stefan Roese <sr@denx.de>
25879 Date: Mon Jun 23 11:15:09 2008 +0200
25881 ppc4xx: Fix problem in gpio_config()
25883 As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
25884 left by one. So the additional shift is bogus.
25886 Signed-off-by: Stefan Roese <sr@denx.de>
25888 commit 40777812316fc252c941665c0f60c148fd79d50f
25889 Author: Detlev Zundel <dzu@denx.de>
25890 Date: Fri Jun 20 22:24:05 2008 +0200
25892 fdt: Fix typo in variable name.
25894 Signed-off-by: Detlev Zundel <dzu@denx.de>
25896 commit 5f723a3b98c630bde33de74351f2121691fdef14
25897 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25898 Date: Fri Jun 20 10:41:05 2008 +0200
25900 avr32: Enable SPI flash support on ATNGW100
25902 The ATNGW100 has 8MB DataFlash on board. Give users access to it through
25903 the new SPI flash framework.
25905 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25907 commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
25908 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25909 Date: Fri Jun 20 12:44:28 2008 +0200
25911 avr32: Fix SPI portmux initialization
25913 Use the new GPIO manipulation functions to set up the chip select lines,
25914 and make sure both busses use GPIO for chip select control.
25916 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25918 commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
25919 Author: Peter Ma <pma@mediamatech.com>
25920 Date: Sun Jun 1 22:59:24 2008 -0700
25922 avr32: Add GPIO manipulation functions
25924 Adds GPIO manipulation functions for AVR32 AP7 platform.
25926 Signed-off-by: Peter Ma <pma@mediamatech.com>
25927 [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
25928 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
25930 commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
25931 Author: Wolfgang Grandegger <wg@grandegger.com>
25932 Date: Thu Jun 5 13:02:30 2008 +0200
25934 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
25936 This patch is based on the following patch sent a few minutes ago:
25937 "NAND FSL UPM: driver re-write using the hwcontrol callback"
25938 It is untested, of course. Anton, could you please give it a try.
25940 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
25941 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
25943 commit 96026d42fa4e646d28318c0a1438aac4b2017909
25944 Author: Anatolij Gustschin <agust@denx.de>
25945 Date: Thu Jun 12 12:40:11 2008 +0200
25947 Fix 4xx build issue
25949 Building for 4xx doesn't work since commit 4dbdb768:
25951 In file included from 4xx_pcie.c:28:
25952 include/asm/processor.h:971: error: expected ')' before 'ver'
25953 make[1]: *** [4xx_pcie.o] Error 1
25955 This patch fixes the problem.
25957 Signed-off-by: Anatolij Gustschin <agust@denx.de>
25958 Acked-by: Stefan Roese <sr@denx.de>
25959 Acked-by: Kumar Gala <galak@kernel.crashing.org>
25961 commit a036b0443657fe0f4773786de9092251869f08ac
25962 Author: Kumar Gala <galak@kernel.crashing.org>
25963 Date: Thu Jun 19 01:45:50 2008 -0500
25965 MPC8610HPCD: Report board id, board version and fpga version.
25967 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25969 commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
25970 Author: Kumar Gala <galak@kernel.crashing.org>
25971 Date: Thu Jun 19 01:45:27 2008 -0500
25973 MPC8641HPCN: Report board id, board version and fpga version.
25975 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25977 commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
25978 Author: Stefan Roese <sr@denx.de>
25979 Date: Mon Jun 16 10:40:02 2008 +0200
25981 cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
25983 This patch simplifies flash_toggle() (AMD commandset), which is used to
25984 detect if a FLASH device is still busy with erase/program operations. On
25985 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
25986 did not detect the busy state reliably, resulting in non erased sectors
25987 etc. This patch now simplifies this function by "just" comparing the
25988 complete data-word instead of ANDing it with the command-word (0x40)
25989 before the compatison. It is done the same way in the Linux implementation
25990 chip_ready() in cfi_cmdset_0002.c.
25992 Signed-off-by: Stefan Roese <sr@denx.de>
25994 commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
25995 Author: Philip Balister <philip@balister.org>
25996 Date: Mon Jun 16 08:58:07 2008 -0400
25998 NAND: Add missing declaration to non-redundant saveenv().
26000 Signed-off-by: Scott Wood <scottwood@freescale.com>
26002 commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
26003 Author: Wolfgang Grandegger <wg@grandegger.com>
26004 Date: Mon Jun 2 15:09:55 2008 +0200
26006 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
26008 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26009 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
26010 Signed-off-by: Scott Wood <scottwood@freescale.com>
26012 commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
26013 Author: Stefan Roese <sr@denx.de>
26014 Date: Tue Jun 10 15:34:11 2008 +0200
26016 ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
26018 This patch disables the square wave output of the M41T62 RTC used on
26019 Canyonlands & Glacier. Here the explanation:
26021 The serial real-time clock part used in the design is an
26022 STMicro M41T62. This part has a full-time 32KHz square wave
26023 output that is connected to the TmrClk input to the
26024 processor. The default state for this square wave output is
26025 enabled so the output runs continuously when the board is
26026 powered normally and also from the battery. The TmrClk input
26027 to the processor goes to ground when the power is removed
26028 from the board/processor, and therefore the running square
26029 wave output is driving ground which drains the battery quickly.
26031 Signed-off-by: Stefan Roese <sr@denx.de>
26033 commit a94f22f08f280905926219e568568964cb9eeb9d
26034 Author: Andy Fleming <afleming@freescale.com>
26035 Date: Wed Jun 11 18:10:20 2008 -0500
26037 Fix build issue with string.h and linux/string.h
26040 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
26041 Author: Wolfgang Denk <wd@denx.de>
26042 Date: Fri Jun 6 14:28:14 2008 +0200
26044 tools/mkimage: fix compiler warnings on some systems.
26046 Broke building on some systems, because the host's string.h was interfering
26047 with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
26048 we're building for the host, so now we only include when building inside
26051 Signed-off-by: Andy Fleming <afleming@freescale.com>
26053 commit 9973e3c614721bbf169882ffc3be266a6611cd60
26054 Author: Becky Bruce <becky.bruce@freescale.com>
26055 Date: Mon Jun 9 16:03:40 2008 -0500
26057 Change initdram() return type to phys_size_t
26059 This patch changes the return type of initdram() from long int to phys_size_t.
26060 This is required for a couple of reasons: long int limits the amount of dram
26061 to 2GB, and u-boot in general is moving over to phys_size_t to represent the
26062 size of physical memory. phys_size_t is defined as an unsigned long on almost
26063 all current platforms.
26065 This patch *only* changes the return type of the initdram function (in
26066 include/common.h, as well as in each board's implementation of initdram). It
26067 does not actually modify the code inside the function on any of the platforms;
26068 platforms which wish to support more than 2GB of DRAM will need to modify
26069 their initdram() function code.
26071 Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
26074 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26076 commit 391fd93ab23e15ab3dd58a54f5b609024009c378
26077 Author: Becky Bruce <becky.bruce@freescale.com>
26078 Date: Mon Jun 9 20:37:18 2008 -0500
26080 Change lmb to use phys_size_t/phys_addr_t
26082 This updates the lmb code to use phys_size_t
26083 and phys_addr_t instead of unsigned long. Other code
26084 which interacts with this code, like getenv_bootm_size()
26087 Booted on MPC8641HPCN, build-tested ppc, arm, mips.
26089 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26091 commit 61b09fc2952dc636017df4e7970e3de132276ba1
26092 Author: Becky Bruce <becky.bruce@freescale.com>
26093 Date: Mon Jun 9 20:37:17 2008 -0500
26095 Change print_size to take phys_size_t
26097 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26099 commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
26100 Author: Becky Bruce <becky.bruce@freescale.com>
26101 Date: Mon Jun 9 20:37:16 2008 -0500
26103 Change bd/gd memsize/ram_size to be phys_size_t.
26105 Currently, both are defined as an unsigned long, but
26106 should be phys_size_t. This should result in no real change,
26107 since phys_size_t is currently an unsigned long for all the
26108 default configs. Also add print_lnum to cmd_bdinfo to deal
26109 with the potentially wider memsize.
26111 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26113 commit ba04f7010958e88a8910f2a123fee53fdc72e013
26114 Author: Kumar Gala <galak@kernel.crashing.org>
26115 Date: Tue Jun 10 16:16:02 2008 -0500
26117 FSL LAW: Add new interface to use the last free LAW
26119 LAWs have the concept of priority so its useful to be able to allocate
26120 the lowest (highest number) priority. We will end up using this with the
26123 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26125 commit 859a86a25c569d3665ff413d1d923394b8a961f3
26126 Author: Kumar Gala <galak@kernel.crashing.org>
26127 Date: Wed Jun 11 00:51:45 2008 -0500
26129 85xx/86xx: Move to dynamic mgmt of LAWs
26131 With the new LAW interface (set_next_law) we can move to letting the
26132 system allocate which LAWs are used for what purpose. This makes life
26133 a bit easier going forward with the new DDR code.
26135 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26136 Signed-off-by: Andy Fleming <afleming@freescale.com>
26137 Acked-by: Jon Loeliger <jdl@freescale.com>
26138 Acked-by: Becky Bruce <becky.bruce@freescale.com>
26140 commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
26141 Author: Kumar Gala <galak@kernel.crashing.org>
26142 Date: Wed Jun 11 00:44:10 2008 -0500
26144 FSL LAW: Keep track of LAW allocations
26146 Make it so we keep track of which LAWs have allocated and provide
26147 a function (set_next_law) which can allocate a LAW for us if one is
26150 In the future we will move to doing more "dynamic" LAW allocation
26151 since the majority of users dont really care about what LAW number
26154 Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
26156 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26157 Signed-off-by: Andy Fleming <afleming@freescale.com>
26159 commit ddde74a159caa6e18b481fec01d40b885aebb566
26160 Author: Kumar Gala <galak@kernel.crashing.org>
26161 Date: Mon Jun 9 22:31:57 2008 -0500
26163 85xx: remove dummy board_early_init_f
26165 A number of board ports have empty version of board_early_init_f
26166 for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
26168 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26170 commit 81e56e9af0d43712db8efb843606a8d62eab454f
26171 Author: Kumar Gala <galak@kernel.crashing.org>
26172 Date: Mon Jun 9 18:55:38 2008 -0500
26174 MPC8544DS: Update config.h
26176 * Enable flash progress
26177 * remove CLEAR_LAW0 since we dont really use it
26179 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26181 commit 978e81604c1b28526ed580df0fbe64eb8384e94f
26182 Author: Kumar Gala <galak@kernel.crashing.org>
26183 Date: Mon Jun 9 13:37:24 2008 -0500
26185 85xx: Remove unused and unconfigured memory test code.
26187 Remove unused and unconfigured DDR test code from FSL 85xx boards.
26188 Besides, other common code exists.
26190 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26192 commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
26193 Author: Sergei Poselenov <sposelenov@emcraft.com>
26194 Date: Fri Jun 6 15:42:45 2008 +0200
26196 Socrates: Added FPGA base address update in FDT.
26198 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
26200 commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
26201 Author: Sergei Poselenov <sposelenov@emcraft.com>
26202 Date: Fri Jun 6 15:42:44 2008 +0200
26204 Socrates: NAND support added. Changed the U-Boot base address and
26206 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
26208 commit 248ae5cfc8bf69074d1da099dc495d8e06070547
26209 Author: Sergei Poselenov <sposelenov@emcraft.com>
26210 Date: Fri Jun 6 15:42:43 2008 +0200
26212 NAND: Added support for 128-bit OOB, adapted
26214 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
26216 commit 31ca0208612f2eb57690110d7c2815953650e47b
26217 Author: Sergei Poselenov <sposelenov@emcraft.com>
26218 Date: Fri Jun 6 15:42:42 2008 +0200
26220 Socrates: added missed file with UPMA configuration data.
26222 Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
26224 commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
26225 Author: Sergei Poselenov <sposelenov@emcraft.com>
26226 Date: Fri Jun 6 15:42:41 2008 +0200
26228 Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
26230 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
26232 commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
26233 Author: Sergei Poselenov <sposelenov@emcraft.com>
26234 Date: Fri Jun 6 15:42:40 2008 +0200
26236 Added the upmconfig() function for 85xx.
26238 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
26239 Signed-off-by: Andy Fleming <afleming@freescale.com>
26241 commit d39e68514ff943930ee692cff3fde03532eb7fec
26242 Author: Sergei Poselenov <sposelenov@emcraft.com>
26243 Date: Fri Jun 6 15:42:39 2008 +0200
26245 Socrates: config file cleanup.
26247 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
26249 commit e8cc3f04b124f757af4528206e60d8eb715ae083
26250 Author: Wolfgang Grandegger <wg@grandegger.com>
26251 Date: Thu Jun 5 13:12:10 2008 +0200
26253 TQM85xx: Change memory map to support Flash memory > 128 MiB
26255 Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
26256 memory. The current memory map only supports up to 128 MiB Flash.
26257 This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
26258 set, up to 1 GiB flash is supported. To achieve this, the memory
26259 map has to be adjusted in great parts (for example the CCSRBAR is
26260 moved from 0xE0000000 to 0xA0000000).
26262 If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
26263 memory map also has to be considered in the kernel (changed
26264 CCSRBAR address, changed PCI IO base address, ...). Please use
26265 an appropriate Flat Device Tree blob (tqm8548.dtb).
26267 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26268 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26270 commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
26271 Author: Wolfgang Grandegger <wg@grandegger.com>
26272 Date: Thu Jun 5 13:12:09 2008 +0200
26274 TQM85xx: NAND support via local bus UPMB
26276 This patch adds support for NAND FLASH on the TQM8548. It is disabled by
26277 default and can be enabled for the TQM8548 modules. It is now based on
26278 the re-written FSL NAND UPM driver. A patch has been posted earlier today
26281 "NAND FSL UPM: driver re-write using the hwcontrol callback"
26283 Note that the R/B pin is not supported by that module requiring to use
26284 the specified maximum delay time.
26286 Note: With NAND support enabled the size of the U-Boot image exceeds
26287 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
26288 doubling the image size :-(.
26290 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
26291 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26293 commit b9e8078bb3f3c48111a7081e27279938c3a445e1
26294 Author: Wolfgang Grandegger <wg@grandegger.com>
26295 Date: Thu Jun 5 13:12:08 2008 +0200
26297 TQM8548: PCI express support
26299 This patch adds support for PCI express cards. The board support
26300 now uses common FSL PCI init code, for both, PCI and PCIe on all
26303 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
26304 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26306 commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
26307 Author: Wolfgang Grandegger <wg@grandegger.com>
26308 Date: Thu Jun 5 13:12:07 2008 +0200
26310 TQM8548: Basic support for the TQM8548 modules
26312 This patch adds basic support for the TQM8548 module from TQ-Components
26313 (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
26316 Furthermore Flash buffer write has been enabled to speed up output to
26317 the Flash by approx. a factor of 10.
26319 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
26320 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26322 commit 25991353204c78b094c3c1fec90182dcd607ab8f
26323 Author: Wolfgang Grandegger <wg@grandegger.com>
26324 Date: Thu Jun 5 13:12:06 2008 +0200
26326 TQM85xx: Support for Flat Device Tree
26328 This patch adds support for Linux kernels using the Flat Device Tree.
26329 It also re-defines the default environment settings for booting Linux
26332 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26334 commit d9ee843d54c54776e1fdb86336ce554906a87331
26335 Author: Wolfgang Grandegger <wg@grandegger.com>
26336 Date: Thu Jun 5 13:12:05 2008 +0200
26338 TQM85xx: Support for Intel 82527 compatible CAN controller
26340 This patch adds initialization of the UPMC RAM to support up to two
26341 Intel 82527 compatible CAN controller on the TQM85xx modules.
26343 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
26344 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26346 commit 518d5cfe72916323c746af1647764459914f555f
26347 Author: Wolfgang Grandegger <wg@grandegger.com>
26348 Date: Thu Jun 5 13:12:04 2008 +0200
26350 TQM85xx: Bugfix in the SDRAM initialisation
26352 The CS0_BNDS register is now set according to the detected
26355 Signed-off-by Martin Krause <martin.krause@tqs.de>
26357 commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
26358 Author: Wolfgang Grandegger <wg@grandegger.com>
26359 Date: Thu Jun 5 13:12:03 2008 +0200
26361 TQM85xx: Fix chip select configuration for second FLASH bank
26363 This patch fixes the re-calculation of the automatic chip select
26364 configuration for boards with two populated FLASH banks.
26366 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26368 commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
26369 Author: Wolfgang Grandegger <wg@grandegger.com>
26370 Date: Thu Jun 5 13:12:02 2008 +0200
26372 TQM85xx: Support for Spansion 'N' type flashes added
26374 The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
26375 than the formerly used 'M' types (S29GLxxxM series), so the flash layout
26376 needs to be changed -> new start address of the environment. The macro
26377 definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
26378 defined for boards with 'N' type flashes.
26380 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26381 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26383 commit 5d5bd838f76eade22c0ea40a500389f924d0da36
26384 Author: Wolfgang Grandegger <wg@grandegger.com>
26385 Date: Thu Jun 5 13:12:01 2008 +0200
26387 TQM85xx: Fix CPM port pin configuration
26389 Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
26390 board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
26391 as serial interface anyway. Worse, on some board variants configuring the
26392 pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
26394 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26396 commit b99ba1679e8cd51b023e67098c89e606e47137d2
26397 Author: Wolfgang Grandegger <wg@grandegger.com>
26398 Date: Thu Jun 5 13:12:00 2008 +0200
26400 TQM85xx: Various coding style fixes
26402 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26404 commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
26405 Author: Gerald Van Baren <vanbaren@cideas.com>
26406 Date: Tue Jun 10 22:15:58 2008 -0400
26408 libfdt: Move the working_fdt pointer to cmd_fdt.c
26410 The working_fdt pointer was declared in common/fdt_support.c but was
26411 not used there. Move it to common/cmd_fdt.c where it is used (it is
26412 also used in lib_ppc/bootm.c).
26414 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
26416 commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
26417 Author: Kim Phillips <kim.phillips@freescale.com>
26418 Date: Tue Jun 10 11:06:17 2008 -0500
26420 fdt: unshadow global working fdt variable
26422 differentiate with local variables of the same name by renaming the
26423 global 'fdt' variable 'working_fdt'.
26425 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26427 commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
26428 Author: Andy Fleming <afleming@freescale.com>
26429 Date: Tue Jun 10 18:49:34 2008 -0500
26431 socrates: Fix PCI clk fix patch
26433 The submitted patch seems to have been more up-to-date, but an older patch was
26434 already in the repository. This patch encompasses the differences
26436 Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
26438 Signed-off-by: Andy Fleming <afleming@freescale.com>
26440 commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
26441 Author: Wolfgang Grandegger <wg@grandegger.com>
26442 Date: Thu Jun 5 13:02:29 2008 +0200
26444 NAND FSL UPM: driver re-write using the hwcontrol callback
26446 This is a re-write of the NAND FSL UPM driver using the more universal
26447 hwcontrol callback (instead of the cmdfunc callback). Here is a brief
26448 list of furher modifications:
26450 - For the time being, the UPM setup writing the UPM array has been
26451 removed from the driver and must now be done by the board specific
26454 - The bus width definition in "struct fsl_upm_nand" is now in bits to
26455 comply with the corresponding Linux driver and 8, 16 and 32 bit
26456 accesses are supported.
26458 - chip->dev_read is only set if fun->dev_ready != NULL, which is
26459 required for boards not connecting the R/B pin.
26461 - A few issue have been fixed with MxMR bit manipulation like in the
26462 corresponding Linux driver.
26464 Note: I think the "io_addr" field of "struct fsl_upm" could be removed
26465 as well, because the address is already determined by
26466 "nand->IO_ADDR_[RW]", but I'm not 100% sure.
26468 This patch has been tested on a TQM8548 modules with the NAND chip
26469 Micron MT29F8G08FABWP.
26471 This patch is based on the following patches posted to this list a few
26474 PPC: add accessor macros to clear and set bits in one shot
26475 83xx/85xx/86xx: add more MxMR local bus definitions
26477 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26478 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
26480 commit 6beecfbb542992eede5831240cd58678274683a9
26481 Author: Wolfgang Grandegger <wg@grandegger.com>
26482 Date: Thu Jun 5 13:11:59 2008 +0200
26484 MPC85xx: Beautify boot output of L2 cache configuration
26486 The boot output is now aligned poperly with other boot output
26492 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26494 commit 398415114f0a705163a14543e9fef03f734b1ffa
26495 Author: Wolfgang Grandegger <wg@grandegger.com>
26496 Date: Wed Jun 4 12:45:22 2008 +0200
26498 PPC: add accessor macros to clear and set bits in one shot
26500 PPC: add accessor macros to clear and set bits in one shot
26502 This patch adds macros from linux/include/asm-powerpc/io.h to clear and
26503 set bits in one shot using the in_be32, out_be32, etc. accessor functions.
26504 They are very handy to manipulate bits it I/O registers.
26506 This patch is required for my forthcoming FSL NAND UPM driver re-write and
26507 the support for the TQM8548 module.
26509 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26511 commit 4677988c7edc070c3786d3db7994abeca3ab82a0
26512 Author: Wolfgang Grandegger <wg@grandegger.com>
26513 Date: Wed Jun 4 13:52:17 2008 +0200
26515 TQM: move TQM boards to board/tqc
26517 Move all TQM board directories to the vendor specific directory "tqc"
26518 for modules from TQ-Components GmbH (http://www.tqc.de).
26520 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26522 commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
26523 Author: Wolfgang Grandegger <wg@grandegger.com>
26524 Date: Mon Jun 2 12:09:30 2008 +0200
26526 83xx/85xx/86xx: add more MxMR local bus definitions
26528 83xx/85xx/86xx: add more MxMR local bus definitions
26530 This patch adds more macro definitions for the UPM Machine Mode Registers
26531 They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
26532 common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
26533 required for my forthcoming FSL NAND UPM driver re-write and the support
26534 for the TQM8548 module.
26536 This patch is based on the following two patches from Anton Vorontsov:
26538 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
26539 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
26541 I leave coding style violation fixes, code beautification and name
26542 corrections to somebody else ;-(.
26544 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
26546 commit c8c5fc266e4499e283c293ccb972863156aa4134
26547 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
26548 Date: Thu May 29 18:14:56 2008 +0400
26550 83xx/85xx: further localbus cleanups
26552 Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
26553 from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
26555 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
26557 commit 42dbd667c88d496882d53e22656e89b654205492
26558 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
26559 Date: Wed May 28 18:20:15 2008 +0400
26561 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
26563 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
26564 use it on MPC85xx and MPC86xx processors.
26566 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
26568 commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
26569 Author: Kumar Gala <galak@kernel.crashing.org>
26570 Date: Thu May 29 11:22:06 2008 -0500
26572 85xx: Add setting of cache props in the device tree.
26574 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26576 commit 4dbdb7681e243431530df0725627192a0c4aefda
26577 Author: Kumar Gala <galak@kernel.crashing.org>
26578 Date: Tue Jun 10 16:53:46 2008 -0500
26580 85xx: expose cpu identification
26582 The current cpu identification code is used just to return the name
26583 of the processor at boot. There are some other locations that the name
26584 is useful (device tree setup). Expose the functionality to other bits
26587 Also, drop the 'E' suffix and add it on by looking at the SVR version
26588 when we print this out. This is mainly to allow the most flexible use
26589 of the name. The device tree code tends to not care about the 'E' suffix.
26591 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26593 commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
26594 Author: Kim Phillips <kim.phillips@freescale.com>
26595 Date: Tue Jun 10 13:25:24 2008 -0500
26597 mpc83xx: MVBLM7: minor build fixups
26599 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26601 commit a1293e549b56da135ef32ffca5b9d35a16aa6802
26602 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
26603 Date: Tue Jun 10 09:14:05 2008 +0200
26605 add MPC8343 based board mvBlueLYNX-M7 (board+make files)
26607 Add MPC8343 based board mvBlueLYNX-M7.
26608 It's a single board stereo camera system.
26609 Please read doc/README.mvblm7 for details.
26611 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
26612 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26614 commit c005b93925ba49f07da2aa748527996d927e172f
26615 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
26616 Date: Tue Jun 10 09:13:16 2008 +0200
26618 add MPC8343 based board mvBlueLYNX-M7 (doc+config)
26620 Add MPC8343 based board mvBlueLYNX-M7.
26621 It's a single board stereo camera system.
26622 Please read doc/README.mvblm7 for details.
26624 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
26625 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26627 commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
26628 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
26629 Date: Thu May 29 18:14:56 2008 +0400
26631 83xx/85xx: further localbus cleanups
26633 move the BRx_* and ORx_* left behind in mpc85xx.h
26635 The same is needed for mpc8xx.h and mpc8260.h (defines are almost
26636 the same, just few differences which needs some attention though).
26638 But the bad news for mpc8xx and mpc8260 is that there are a lot of users
26639 of these defines. So this cleanup I'll leave for the "better times".
26641 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
26642 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26644 commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
26645 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
26646 Date: Wed May 28 18:20:15 2008 +0400
26648 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
26650 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
26651 use it on MPC85xx and MPC86xx processors.
26653 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
26654 Acked-by: Andy Fleming <afleming@freescale.com>
26655 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26657 commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
26658 Author: Tor Krill <tor@excito.com>
26659 Date: Mon Jun 2 15:09:30 2008 +0200
26661 Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
26663 Signed-off-by: Tor Krill <tor@excito.com>
26664 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
26666 commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
26667 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26668 Date: Mon Jun 9 23:37:44 2008 +0900
26670 net: Conditional COBJS inclusion of network drivers
26672 Replace COBJS-y with appropriate driver config names.
26674 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26675 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26677 commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
26678 Author: Gerald Van Baren <vanbaren@cideas.com>
26679 Date: Mon Jun 9 21:02:17 2008 -0400
26681 Use strncmp() for the fdt command
26683 Cleaner than doing multiple conditionals on characters.
26685 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
26687 commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
26688 Author: Gerald Van Baren <vanbaren@cideas.com>
26689 Date: Sat Jun 7 12:25:05 2008 -0400
26691 The fdt boardsetup command criteria was not unique
26693 It was checking just for "b", which is not unique with respect to the
26694 "boot" command. Change to check for "boa"[rdsetup].
26696 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
26698 commit 2f08bfa9526bae4f461e043530cfb903fec0d273
26699 Author: David Gibson <david@gibson.dropbear.id.au>
26700 Date: Tue May 20 17:19:11 2008 +1000
26702 libfdt: Several cleanups to parameter checking
26704 This patch makes a couple of small cleanups to parameter checking of
26707 - In several functions which take a node offset, we use an
26708 idiom involving fdt_next_tag() first to check that we have indeed been
26709 given a node offset. This patch adds a helper function
26710 _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
26712 - In fdt_rw.c in several places we have the expanded version
26713 of the RW_CHECK_HEADER() macro for no particular reason. This patch
26714 replaces those instances with an invocation of the macro; that's what
26717 - In fdt_sw.c we rename the check_header_sw() function to
26718 sw_check_header() to match the analgous function in fdt_rw.c, and we
26719 provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
26720 functions in fdt_rw.c
26722 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
26724 commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
26725 Author: Gerald Van Baren <vanbaren@cideas.com>
26726 Date: Tue Jun 3 20:34:45 2008 -0400
26728 Remove the deprecated CONFIG_OF_FLAT_TREE
26730 Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
26731 cleaner, has better functionality, and is better supported.
26733 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
26735 commit 62bcdda293efa752f8281fbd9da03822b27ce82f
26736 Author: Gerald Van Baren <vanbaren@cideas.com>
26737 Date: Tue Jun 3 20:26:29 2008 -0400
26739 Change the stxxst to CONFIG_OF_LIBFDT
26741 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
26742 to CONFIG_OF_LIBFDT.
26744 WARNING: It appears that this board lost its ability to boot via a
26745 flattened device tree prior to this changeset.
26747 WARNING: This conversion was untested because I do not have a board to
26750 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
26752 commit 589c04271d129729a8b01391453851ab9cc4069c
26753 Author: Gerald Van Baren <vanbaren@cideas.com>
26754 Date: Tue Jun 3 20:24:58 2008 -0400
26756 Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
26758 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
26759 to CONFIG_OF_LIBFDT.
26761 WARNING: This conversion is untested because I do not have a board to
26764 NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
26765 /aliases/ethernet1 property for the ethernet to work.
26767 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
26769 commit ee1e35bede91debc8bff9b02f75574486033b652
26770 Author: Kumar Gala <galak@kernel.crashing.org>
26771 Date: Thu May 29 01:21:24 2008 -0500
26773 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
26775 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
26777 commit 3b9519fc50802436e417c839e69df7b2016cade5
26778 Author: Becky Bruce <becky.bruce@freescale.com>
26779 Date: Wed May 14 13:10:04 2008 -0500
26781 MPC85xx: Change traps.c to not reference non-addressable memory
26783 Currently, END_OF_RAM is used by the trap code to determine if
26784 we should attempt to access the stack pointer or not. However,
26785 on systems with a lot of RAM, only a subset of the RAM is
26786 guaranteed to be mapped in and accessible. Change END_OF_RAM
26787 to use get_effective_memsize() instead of using the raw ram
26788 size out of the bd.
26790 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26792 commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
26793 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26794 Date: Mon Jun 9 13:39:57 2008 +0900
26796 sh: Renesas Solutions SH7763RDP board support
26798 SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
26799 In this patch, support SCIF, NOR Flash, and Ethernet.
26801 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26802 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26804 commit 60179098a95eaa972007d7ec58e4c1588029720f
26805 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26806 Date: Fri Jun 6 16:24:13 2008 +0900
26808 sh: Add support Renesas SH7763
26810 Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
26811 This patch supprts CPU register's header file.
26813 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26814 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26816 commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
26817 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26818 Date: Fri Jun 6 16:16:08 2008 +0900
26820 sh: SH7763 SCIF support
26822 SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
26823 but only SCIF2 is different. This patch work all SCIF channel.
26825 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
26826 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
26828 commit 79b51ff8205f0354d5300570614c1d2db499679c
26829 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26830 Date: Sat Jun 7 20:51:59 2008 +0900
26832 [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
26834 Also get rid of some #ifdefs in *.c files.
26836 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26838 commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
26839 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26840 Date: Sat Jun 7 20:51:56 2008 +0900
26842 [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
26846 Common Alchemy Au1x00 stuff. All Alchemy processor based machines
26847 need to have this config as a system type specifier.
26849 CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
26850 CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
26852 Machine type specifiers. Each port should have one of aboves.
26854 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26856 commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
26857 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
26858 Date: Fri May 30 16:05:28 2008 -0400
26860 env_nand.c: Added bad block management for environment variables
26862 Modified to check for bad blocks and to skipping over them when
26863 CFG_ENV_RANGE has been defined.
26864 CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
26867 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
26868 Signed-off-by: Scott Wood <scottwood@freescale.com>
26870 commit 279726bd00558e80263d44581c44167625b7fb9a
26871 Author: Becky Bruce <becky.bruce@freescale.com>
26872 Date: Wed May 14 13:09:58 2008 -0500
26874 MPC86xx: Change traps.c to not reference non-addressable memory
26876 Currently, END_OF_RAM is used by the trap code to determine if
26877 we should attempt to access the stack pointer or not. However,
26878 on systems with a lot of RAM, only a subset of the RAM is
26879 guaranteed to be mapped in and accessible. Change END_OF_RAM
26880 to use get_effective_memsize() instead of using the raw ram
26881 size out of the bd to prevent us from trying to access
26884 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
26886 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
26887 Author: Wolfgang Denk <wd@denx.de>
26888 Date: Fri Jun 6 14:28:14 2008 +0200
26890 tools/mkimage: fix compiler warnings on some systems.
26892 Signed-off-by: Wolfgang Denk <wd@denx.de>
26894 commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
26895 Author: Stefan Roese <sr@denx.de>
26896 Date: Fri Jun 6 16:10:41 2008 +0200
26898 ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
26900 We use upper case letters for the AMCC processor defines (like
26901 CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
26902 not CONFIG_440SPe. This patch fixes the last misspelled config options.
26904 Signed-off-by: Stefan Roese <sr@denx.de>
26906 commit 72675dc6c06a48846d180106161d49dd714383cc
26907 Author: Stefan Roese <sr@denx.de>
26908 Date: Fri Jun 6 15:55:21 2008 +0200
26910 ppc4xx: Unify AMCC's board config files (part 3/3)
26912 This patch series unifies the AMCC eval board ports by introducing
26913 a common include header for all AMCC eval boards:
26915 include/configs/amcc-common.h
26917 This header now includes all common configuration options/defines which
26918 are removed from the board specific headers.
26920 The reason for this is ease of maintenance and unified look and feel
26921 of all AMCC boards.
26923 Signed-off-by: Stefan Roese <sr@denx.de>
26925 commit 490f204096d6e2c9940f67816f154a8125bab116
26926 Author: Stefan Roese <sr@denx.de>
26927 Date: Fri Jun 6 15:55:03 2008 +0200
26929 ppc4xx: Unify AMCC's board config files (part 2/3)
26931 This patch series unifies the AMCC eval board ports by introducing
26932 a common include header for all AMCC eval boards:
26934 include/configs/amcc-common.h
26936 This header now includes all common configuration options/defines which
26937 are removed from the board specific headers.
26939 The reason for this is ease of maintenance and unified look and feel
26940 of all AMCC boards.
26942 Signed-off-by: Stefan Roese <sr@denx.de>
26944 commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
26945 Author: Stefan Roese <sr@denx.de>
26946 Date: Fri Jun 6 15:54:31 2008 +0200
26948 ppc4xx: Unify AMCC's board config files (part 1/3)
26950 This patch series unifies the AMCC eval board ports by introducing
26951 a common include header for all AMCC eval boards:
26953 include/configs/amcc-common.h
26955 This header now includes all common configuration options/defines which
26956 are removed from the board specific headers.
26958 The reason for this is ease of maintenance and unified look and feel
26959 of all AMCC boards.
26961 Signed-off-by: Stefan Roese <sr@denx.de>
26963 commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
26964 Author: Remy Bohmer <linux@bohmer.net>
26965 Date: Thu Jun 5 13:03:36 2008 +0200
26967 DM9000 fix status check fail 0x6d error for trizeps board
26969 According to the Application Notes of the DM9000, only the 2 bits 0:1 of
26970 the status byte need to be checked to identify a valid packet in the fifo
26972 But, The several different Application Notes do not all speak the same
26973 language on these bits. They do not disagree, but only 1 Application Note
26974 noted explicitly that only these 2 bits need to be checked.
26975 Even the datasheets do not mention anything about these 2 bits.
26977 Because the old code, and the kernel check the whole byte, I left this piece
26980 However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
26983 Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
26984 in the fifo) is much shorter now, compared to the older U-boot driver code,
26985 so that we can maybe run into a hardware condition now that was never seen
26986 before, or maybe was seen very unfrequently.
26988 Additionaly added a cleanup of a stack variable.
26990 Signed-off-by: Remy Bohmer <linux@bohmer.net>
26991 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26993 commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
26994 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
26995 Date: Thu Jun 5 22:29:00 2008 +0900
26997 [MIPS] Update <asm/addrspace.h> header
26999 - Fix traditional KSEG names
27000 - Replace PHYSADDR with CPHYSADDR
27002 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27004 commit f0d5a6f060d00358b85c62a921a423ea8df71184
27005 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27006 Date: Thu Jun 5 22:29:00 2008 +0900
27008 [MIPS] mips_config.mk: Misc fixes
27010 - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
27013 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27015 commit 5f64d21c9a2998794f255b469165b91f092dfc2d
27016 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27017 Date: Thu Jun 5 22:29:00 2008 +0900
27019 [MIPS] Kill unused <version.h> inclusions
27021 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27023 commit a55d48174cfd1a5bc184159513f48dcbbe409c83
27024 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27025 Date: Thu Jun 5 22:29:00 2008 +0900
27027 [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
27029 MIPS port has two problems in timer routines. One is now we assume CFG_HZ
27030 equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
27031 in the U-Boot system.
27033 The other is we don't have a proper time management counter like timestamp
27034 other ARCHs have. We need the 32-bit millisecond clock counter.
27036 This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
27037 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
27038 of calculated CP0 counter cycles in a CFG_HZ.
27042 * Fix improper CFG_HZ value to have 1000
27044 * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
27046 * timer_init: initialize timestamp and set up the first timer expiration.
27047 Note that we don't need to initialize CP0 count/compare registers here
27048 as they have been already zeroed out on the system reset. Leave them as
27051 * get_timer: calculate how many timestamps have been passed, then return
27052 base-relative timestamp. Make sure we can easily count missed timestamps
27053 regardless of CP0 count/compare value.
27055 * get_ticks: return the current timestamp, that is get_timer(0).
27057 Most parts are from good old Linux v2.6.16 kernel.
27060 - Remove FIXME comments as they turned out to be trivial.
27061 - Use CP0 compare register as a global variable for expirelo.
27062 - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
27065 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27067 commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
27068 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27069 Date: Thu Jun 5 22:29:00 2008 +0900
27071 [MIPS] lib_mips/time.c: Fix udelay
27073 What we have to do is just to wait for given micro-seconds. No need to
27074 take into account current time, get_timer and CFG_HZ.
27076 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27078 commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
27079 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27080 Date: Thu Jun 5 22:28:59 2008 +0900
27082 [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
27084 We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
27085 This patch replaces mips_{compare,count}_set and mips_count_get with
27088 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27090 commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
27091 Author: Remy Bohmer <linux@bohmer.net>
27092 Date: Tue Jun 3 15:48:17 2008 +0200
27094 Get rid of annoying/superfluous bad-checksum warning message
27096 U-boot can complain a lot about 'checksum bad' when it is attached to the network.
27097 It is annoying for ordinary users who start to doubt the network connection
27098 in general when they see messages like this.
27100 This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
27101 than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
27102 now before checking the checksum.
27104 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27105 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27107 commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
27108 Author: Remy Bohmer <linux@bohmer.net>
27109 Date: Wed Jun 4 10:47:25 2008 +0200
27111 Fix order for reading rx-status registers in 32bit mode of DM9000
27113 A last minute cleanup before submitting the DM9000A patch series yesterday introduced
27114 a bug in reading the rx-status registers in 32bit mode only.
27115 This patch repairs this.
27117 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27118 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27120 commit 98291e2e689096420465074cce926b226d2e71b4
27121 Author: Remy Bohmer <linux@bohmer.net>
27122 Date: Tue Jun 3 15:26:26 2008 +0200
27124 DM9000: Some minor code cleanups
27126 Some lines of the U-boot DM9000x driver are longer than 80 characters, or
27127 need some other minor cleanup.
27129 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27130 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27132 commit 850ba7555dbd4ca8d14fc475b864d534797adab3
27133 Author: Remy Bohmer <linux@bohmer.net>
27134 Date: Tue Jun 3 15:26:25 2008 +0200
27136 DM9000: Make driver work properly for DM9000A
27138 The DM9000A network controller does not work with the U-boot DM9000x driver.
27139 Analysis showed that many incoming packets are lost.
27141 The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
27142 check for a valid rx packet be done on the interrupt status register, not
27143 directly by performing the dummy read and the rx status check as is currently
27144 the case in the u-boot driver.
27146 When the recommended poll is done as suggested the driver starts working
27147 correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
27148 can be more than 1 package in the fifo at the same time.
27150 The driver must perform the rx-status check in a loop and read and handle all
27151 packages until there is no more left _after_ the interrupt RX flag is set.
27153 This change has been tested with DM9000A, DM9000E, DM9000EP.
27155 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27156 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27158 commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
27159 Author: Remy Bohmer <linux@bohmer.net>
27160 Date: Tue Jun 3 15:26:24 2008 +0200
27162 DM9000: Improve eth_reset() routine
27164 According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
27165 reset procedure must be done twice to properly reset the DM9000 by means of software.
27166 This errata is not needed anymore for the DM9000A, but it does not bother it.
27168 This change has been tested with DM9000A, DM9000E, DM9000EP.
27170 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27171 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27173 commit acba31847fad9ae40708cc2c9f3a634ec35f3416
27174 Author: Remy Bohmer <linux@bohmer.net>
27175 Date: Tue Jun 3 15:26:23 2008 +0200
27177 DM9000: improve eth_send() routine
27179 The eth_send routine of the U-boot DM9000x driver does not match the
27180 DM9000 or DM9000A application notes/programming guides.
27182 This change improves the stability of the DM9000A network controller.
27184 This change has been tested with DM9000A, DM9000E, DM9000EP.
27186 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27187 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27189 commit 134e266253c02a7832560da59d394989c4f64453
27190 Author: Remy Bohmer <linux@bohmer.net>
27191 Date: Tue Jun 3 15:26:22 2008 +0200
27193 DM9000: repair debug logging
27195 It seems that the debugging code of the DM9000x driver in U-boot has not been
27196 compiled for a long time, because it cannot compile...
27198 Also rearranged some loglines to get more useful info while debugging.
27200 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27201 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27203 commit a101361bfe23c120321e45d114c0603b8e0763e9
27204 Author: Remy Bohmer <linux@bohmer.net>
27205 Date: Tue Jun 3 15:26:21 2008 +0200
27207 DM9000: Add data bus-width auto detection.
27209 The U-boot DM9000x driver contains a compile time bus-width definition for
27210 the databus connected to the network controller.
27212 This compile check makes the code unclear, inflexible and is unneccessary.
27213 It can be asked to the network controller what its bus-width is by reading bits
27214 6 and 7 of the interrupt status register.
27216 The linux kernel already uses a runtime mechanism to determine this bus-width,
27217 so the implementation below looks somewhat like that implementation.
27219 This change has been tested with DM9000A, DM9000E, DM9000EP.
27221 Signed-off-by: Remy Bohmer <linux@bohmer.net>
27222 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27224 commit 63a0afa0c32e5f4ea98a9439542870072437404d
27225 Author: Stefan Roese <sr@denx.de>
27226 Date: Wed Jun 4 19:19:20 2008 +0200
27228 ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
27230 This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
27231 introduced by the commit:
27233 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
27235 With this patch SDRAM will get initialized again and booting from NAND
27238 Signed-off-by: Stefan Roese <sr@denx.de>
27239 Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
27241 commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
27242 Author: Wolfgang Denk <wd@denx.de>
27243 Date: Tue May 27 14:19:30 2008 +0200
27245 Socrates: Fix PCI bus frequency report
27247 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
27249 commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
27250 Author: Tor Krill <tor@excito.com>
27251 Date: Thu May 29 11:10:30 2008 +0200
27253 Fix incorrect switch for IF_TYPE in part.c
27255 Use correct field in block_dev_desc_t when writing interface type in
27256 dev_print. Error introduced in 574b3195.
27258 Also added fix from Martin Krause
27260 Signed-off-by: Tor Krill <tor@excito.com>
27262 commit b64b8a0bd310935b70af69ac970952f2b364ae56
27263 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
27264 Date: Tue May 27 10:25:39 2008 +0200
27266 Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
27268 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
27270 commit 35ef877f0a8f6232cdef748f442fed5accb2b641
27271 Author: Peter Tyser <ptyser@xes-inc.com>
27272 Date: Thu May 22 18:56:52 2008 -0500
27274 Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
27276 Removed unneeded command line history initialization. Also, the original
27277 code would access the 'initted' variable before relocation to SDRAM
27278 which resulted in erratic behavior since the bss is not initialized when
27279 executing from flash.
27281 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
27283 commit 22f371b63038a4ecab04068877c1089e51a01ba1
27284 Author: Grant Erickson <gerickson@nuovations.com>
27285 Date: Wed May 21 13:28:30 2008 -0700
27287 PPC4xx: Simplified post_word_{load, store}
27289 This patch simplifies post_word_{load,store} by using the preprocessor
27290 to eliminate redundant, copy-and-pasted code.
27292 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
27294 commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
27295 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
27296 Date: Wed May 7 21:25:33 2008 +0400
27298 cfi_flash: enable M18 flash chips family support.
27300 Added new command set ID. Buffered write command processing is changed
27301 in order to support M18 flash chips family.
27303 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
27304 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
27306 commit 93c56f212ccdadc182018f0769cb284426b88f1d
27307 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
27308 Date: Wed May 7 21:24:44 2008 +0400
27310 cfi_flash: support of long cmd in U-boot.
27312 Some NOR flash chips needs support of commands with length grether than max
27313 value size of uchar. For example all M18 family chips use 0x1ff command in
27314 buffered write mode as value of program loops count.
27316 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
27317 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
27319 commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
27320 Author: Stefan Roese <sr@denx.de>
27321 Date: Fri May 16 11:06:06 2008 +0200
27323 DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
27325 On AD7414 the first value upon bootup is not read correctly.
27326 This is most likely because of the 800ms update time of the
27327 temp register in normal update mode. To get current values
27328 each time we issue the "dtt" command including upon powerup
27329 we switch into one-short mode.
27331 This patch fixes the problem on AD7414 equipped boards (Sequoia,
27332 Canyonlands etc), that temp value printed in the bootup log was
27335 Signed-off-by: Stefan Roese <sr@denx.de>
27337 commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
27338 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
27339 Date: Fri May 30 16:55:06 2008 +0200
27341 ppc4xx: Cleanup CPCI405 variant's config file
27343 This patch removes some dead code from CPCI405 board's
27344 config files. JFFS2 support is also removed. It's not used and
27345 CPCI4052 does not build anymore without some size reduction.
27347 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
27349 commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
27350 Author: Kenneth Johansson <kenneth@southpole.se>
27351 Date: Thu May 29 16:32:33 2008 +0200
27353 Remove shell variable UNDEF_SYM.
27355 UNDEF_SYM is a shell variable in the main Makefile used to force the
27356 linker to add all u-boot commands to the final image. It has no use here.
27358 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
27360 commit 8c66497e06bf803489c589df58ee591d71033274
27361 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27362 Date: Fri May 16 11:10:35 2008 +0200
27364 Add support for environment in SPI flash
27366 This is pretty incomplete...it doesn't handle reading the environment
27367 before relocation, it doesn't support redundant environment, and it
27368 doesn't support embedded environment. But apart from that, it does
27371 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27373 commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
27374 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27375 Date: Fri May 16 11:10:34 2008 +0200
27377 SPI Flash: Add "sf" command
27379 This adds a new command, "sf" which can be used to manipulate SPI
27380 flash. Currently, initialization, reading, writing and erasing is
27383 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27385 commit d25ce7d24cc0f93881559f4009175ea305af65e8
27386 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27387 Date: Fri May 16 11:10:33 2008 +0200
27389 SPI Flash subsystem
27391 This adds a new SPI flash subsystem.
27393 Currently, only AT45 DataFlash in non-power-of-two mode is supported,
27394 but some preliminary support for other flash types is in place as
27397 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27399 commit 60445cb5c3eb77ed1a07f2d908eef09174483698
27400 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
27401 Date: Fri May 16 11:10:32 2008 +0200
27403 atmel_spi: Driver for the Atmel SPI controller
27405 This adds a driver for the SPI controller found on most AT91 and AVR32
27406 chips, implementing the new SPI API.
27409 - Update to new API
27410 - Handle zero-length transfers appropriately. The user may send a
27411 zero-length SPI transfer with SPI_XFER_END set in order to
27412 deactivate the chip select after a series of transfers with chip
27413 select active. This is useful e.g. when polling the status
27414 register of DataFlash.
27416 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27418 commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
27419 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27420 Date: Fri May 16 11:10:31 2008 +0200
27422 SPI API improvements
27424 This patch gets rid of the spi_chipsel table and adds a handful of new
27425 functions that makes the SPI layer cleaner and more flexible.
27427 Instead of the spi_chipsel table, each board that wants to use SPI
27428 gets to implement three hooks:
27429 * spi_cs_activate(): Activates the chipselect for a given slave
27430 * spi_cs_deactivate(): Deactivates the chipselect for a given slave
27431 * spi_cs_is_valid(): Determines if the given bus/chipselect
27432 combination can be activated.
27434 Not all drivers may need those extra functions however. If that's the
27435 case, the board code may just leave them out (assuming they know what
27436 the driver needs) or rely on the linker to strip them out (assuming
27437 --gc-sections is being used.)
27439 To set up communication parameters for a given slave, the driver needs
27440 to call spi_setup_slave(). This returns a pointer to an opaque
27441 spi_slave struct which must be passed as a parameter to subsequent SPI
27442 calls. This struct can be freed by calling spi_free_slave(), but most
27443 driver probably don't want to do this.
27445 Before starting one or more SPI transfers, the driver must call
27446 spi_claim_bus() to gain exclusive access to the SPI bus and initialize
27447 the hardware. When all transfers are done, the driver must call
27448 spi_release_bus() to make the bus available to others, and possibly
27449 shut down the SPI controller hardware.
27451 spi_xfer() behaves mostly the same as before, but it now takes a
27452 spi_slave parameter instead of a spi_chipsel function pointer. It also
27453 got a new parameter, flags, which is used to specify chip select
27454 behaviour. This may be extended with other flags in the future.
27456 This patch has been build-tested on all powerpc and arm boards
27457 involved. I have not tested NIOS since I don't have a toolchain for it
27458 installed, so I expect some breakage there even though I've tried
27459 fixing up everything I could find by visual inspection.
27461 I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
27462 DataFlash drivers posted as a follow-up. I'd like some help testing
27463 other boards that use the existing SPI API.
27465 But most of all, I'd like some comments on the new API. Is this stuff
27466 usable for everyone? If not, why?
27469 - Build fixes for various boards, drivers and commands
27470 - Provide common struct spi_slave definition that can be extended by
27472 - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
27473 - Make default bus and mode build-time configurable
27474 - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
27477 - Add opaque struct spi_slave for controller-specific data associated
27479 - Add spi_claim_bus() and spi_release_bus()
27480 - Add spi_free_slave()
27481 - spi_setup() is now called spi_setup_slave() and returns a
27483 - soft_spi now supports four SPI modes (CPOL|CPHA)
27484 - Add bus parameter to spi_setup_slave()
27485 - Convert the new i.MX32 SPI driver
27486 - Convert the new MC13783 RTC driver
27489 - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
27492 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27493 Tested-by: Guennadi Liakhovetski <lg@denx.de>
27495 commit 289011207d999b2e4085150d2aa30d547ad9b800
27496 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27497 Date: Fri May 16 11:10:30 2008 +0200
27499 Move definition of container_of() to common.h
27501 AVR32 and AT91SAM9 both have their own identical definitions of
27502 container_of() taken from the Linux kernel. Move it to common.h so
27503 that all architectures can use it.
27505 container_of() is already used by some drivers, and will be used
27506 extensively by the new and improved SPI API.
27508 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27510 commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
27511 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27512 Date: Fri May 16 11:08:11 2008 +0200
27514 soft_i2c: Pull SDA high before reading
27516 Spotted by Dean Capindale.
27518 Systems that support open-drain GPIO properly are allowed provide an
27519 empty I2C_TRISTATE define. However, this means that we need to be
27520 careful not to drive SDA low when the slave is expected to respond.
27522 This patch adds a missing I2C_SDA(1) to read_byte() required to
27523 tristate the SDA line on systems that support open-drain GPIO.
27525 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
27527 commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
27528 Author: Stefan Roese <sr@denx.de>
27529 Date: Mon May 19 11:34:53 2008 +0200
27531 ppc4xx: Remove implementations of testdram()
27533 This patch removes the used testdram() implementations of the board
27534 that are maintained by myself.
27536 Signed-off-by: Stefan Roese <sr@denx.de>
27538 commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
27539 Author: Stefan Roese <sr@denx.de>
27540 Date: Mon Jun 2 17:37:28 2008 +0200
27542 ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
27544 Historically the 405 U-Boot port had a dram_init() call in early init
27545 stage. This function was still called from start.S and most of the time
27546 coded in assembler. This is not needed anymore (since a long time) and
27547 boards should implement the common initdram() function in C instead.
27549 This patch now removed the dram_init() call from start.S and removes the
27550 empty implementations that are scattered through most of the 405 board
27551 ports. Some older board ports really implement this dram_init() though.
27561 I changed those boards to call this assembler dram_init() function now
27562 from their board specific initdram() instead. This *should* work, but please
27563 test again on those platforms. And it is perhaps a good idea that those
27564 boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
27565 some time. So further patches welcome here.
27567 Signed-off-by: Stefan Roese <sr@denx.de>
27569 commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
27570 Author: Stefan Roese <sr@denx.de>
27571 Date: Mon Jun 2 17:22:11 2008 +0200
27573 ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
27575 Signed-off-by: Stefan Roese <sr@denx.de>
27577 commit 39b32be18cd33b53a84065edcd4e465165cc5564
27578 Author: Stefan Roese <sr@denx.de>
27579 Date: Mon Jun 2 17:20:03 2008 +0200
27581 ppc4xx: Fix common ECC generation code for 440GP style platforms
27583 This patch makes the common 4xx ECC code really usable on 440GP style
27586 Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
27587 compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
27588 we need to make some processor dependant defines used later on by the
27591 Signed-off-by: Stefan Roese <sr@denx.de>
27593 commit ec724f883ee3f3925e6c55027e8ffa70ada83303
27594 Author: Stefan Roese <sr@denx.de>
27595 Date: Mon Jun 2 17:13:55 2008 +0200
27597 ppc4xx: Change Kilauea to use the common DDR2 init function
27599 This patch changes the kilauea and kilauea_nand (for NAND booting)
27600 board port to not use a board specific DDR2 init routine anymore. Now
27601 the common code from cpu/ppc4xx is used.
27603 Thanks to Grant Erickson for all his basic work on this 405EX early
27606 Signed-off-by: Stefan Roese <sr@denx.de>
27608 commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
27609 Author: Stefan Roese <sr@denx.de>
27610 Date: Mon Jun 2 14:59:21 2008 +0200
27612 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
27614 This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
27615 ppc4xx related SDRAM/DDR/DDR2 controller defines.
27617 Signed-off-by: Stefan Roese <sr@denx.de>
27619 commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
27620 Author: Stefan Roese <sr@denx.de>
27621 Date: Mon Jun 2 14:57:41 2008 +0200
27623 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
27625 This patch removes all SDRAM related defines from the PPC4xx headers
27626 ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
27627 the same SDRAM controller as 440 systems do (like 405EX and 440SP).
27629 It also introduces new defines for the equipped SDRAM controller based on
27630 which PPC variant is used. There new defines are:
27632 used on 405GR/CR/EP and some Xilinx Virtex boards.
27634 used on 440GP/GX/EP/GR.
27636 used on 440EPx/GRx.
27638 used on 405EX/r/440SP/SPe/460EX/GT.
27640 Signed-off-by: Stefan Roese <sr@denx.de>
27642 commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
27643 Author: Stefan Roese <sr@denx.de>
27644 Date: Mon Jun 2 14:35:44 2008 +0200
27646 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
27648 This patch consolidates the 405 and 440 parts of the NAND booting code
27649 selected via CONFIG_NAND_SPL. Now common code is used to initialize the
27650 SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
27651 Only *after* running from this location, nand_boot() is called.
27653 Please note that the initsdram() call is now moved from nand_boot.c
27654 to start.S. I experienced problems with some boards like Kilauea
27655 (405EX), which don't have internal SRAM (OCM) and relocation needs to
27656 be done to SDRAM before the NAND controller can get accessed. When
27657 initdram() is called later on in nand_boot(), this can lead to problems
27658 with variables in the bss sections like nand_ecc_pos[].
27660 Signed-off-by: Stefan Roese <sr@denx.de>
27661 Acked-by: Scott Wood <scottwood@freescale.com>
27663 commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
27664 Author: Grant Erickson <gerickson@nuovations.com>
27665 Date: Thu May 22 14:44:24 2008 -0700
27667 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
27669 This patch (Part 2 of 2):
27671 * Rolls up a suite of changes to enable correct primordial stack and
27672 global data handling when the data cache is used for such a purpose
27673 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
27675 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
27676 eliminating redundant ECC initialization implementations and moving
27677 redundant SDRAM initialization out of board code into shared 4xx
27680 * Enables MCSR visibility on the 405EX(r).
27682 * Enables the use of the data cache for initial RAM on
27683 both AMCC's Kilauea and Makalu and removes a redundant
27684 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
27686 - Removed, per Stefan Roese's request, defunct memory.c file for
27687 Makalu and rolled sdram_init from it into makalu.c.
27689 With respect to the 4xx DDR initialization and ECC unification, there
27690 is certainly more work that can and should be done (file renaming,
27691 etc.). However, that can be handled at a later date on a second or
27692 third pass. As it stands, this patch moves things forward in an
27693 incremental yet positive way for those platforms that utilize this
27694 code and the features associated with it.
27696 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
27697 Signed-off-by: Stefan Roese <sr@denx.de>
27699 commit c821b5f120bedf73867513466412587c6912a8f8
27700 Author: Grant Erickson <gerickson@nuovations.com>
27701 Date: Thu May 22 14:44:14 2008 -0700
27703 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
27705 This patch (Part 1 of 2):
27707 * Rolls up a suite of changes to enable correct primordial stack and
27708 global data handling when the data cache is used for such a purpose
27709 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
27711 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
27712 eliminating redundant ECC initialization implementations and moving
27713 redundant SDRAM initialization out of board code into shared 4xx
27716 * Enables MCSR visibility on the 405EX(r).
27718 * Enables the use of the data cache for initial RAM on
27719 both AMCC's Kilauea and Makalu and removes a redundant
27720 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
27722 - Removed, per Stefan Roese's request, defunct memory.c file for
27723 Makalu and rolled sdram_init from it into makalu.c.
27725 With respect to the 4xx DDR initialization and ECC unification, there
27726 is certainly more work that can and should be done (file renaming,
27727 etc.). However, that can be handled at a later date on a second or
27728 third pass. As it stands, this patch moves things forward in an
27729 incremental yet positive way for those platforms that utilize this
27730 code and the features associated with it.
27732 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
27733 Signed-off-by: Stefan Roese <sr@denx.de>
27735 commit a439680019e06171d4a5694b7992accce87f590e
27736 Author: Grant Erickson <gerickson@nuovations.com>
27737 Date: Wed May 21 13:28:30 2008 -0700
27739 PPC4xx: Simplified post_word_{load, store}
27741 This patch simplifies post_word_{load,store} by using the preprocessor
27742 to eliminate redundant, copy-and-pasted code.
27744 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
27746 commit f979690ee337450b2030aba128f95b7a8d9881c0
27747 Author: Kumar Gala <galak@kernel.crashing.org>
27748 Date: Thu May 15 15:13:08 2008 -0500
27750 Fix warnings from gcc-4.3.0 build on a ppc host
27752 * The cfi_flash.c memset fix actual allows the board to boot so there is
27753 a bit more going on here than just resolving warnings associated with
27754 uninitialized variables.
27756 * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
27757 inline function 'ext2_find_next_zero_bit' which is not static
27759 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27761 commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
27762 Author: Becky Bruce <becky.bruce@freescale.com>
27763 Date: Wed May 14 13:09:51 2008 -0500
27765 MPC512x: Change traps.c to not reference non-addressable memory
27767 Currently, END_OF_RAM is used by the trap code to determine if
27768 we should attempt to access the stack pointer or not. However,
27769 on systems with a lot of RAM, only a subset of the RAM is
27770 guaranteed to be mapped in and accessible. Change END_OF_RAM
27771 to use get_effective_memsize() instead of using the raw ram
27772 size out of the bd.
27774 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27776 commit 81673e9ae14b771cd13faf19947192599cae3959
27777 Author: Kumar Gala <galak@kernel.crashing.org>
27778 Date: Tue May 13 19:01:54 2008 -0500
27780 Make sure common.h is the first include.
27782 If common.h isn't first we can get CONFIG_ options defined in the
27783 board config file ignored. This can cause an issue if any of those
27784 config options impact the size of types of data structures
27785 (eg CONFIG_PHYS_64BIT).
27787 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27789 commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
27790 Author: Marian Balakowicz <m8@semihalf.com>
27791 Date: Tue May 13 15:53:29 2008 +0200
27793 Avoid initrd and logbuffer area overlaps
27795 Add logbuffer to reserved LMB areas to prevent initrd allocation
27796 from overlaping with it.
27798 Make sure to use correct logbuffer base address.
27800 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
27802 commit 6956d53d9934862507f83f0e3255dfd4662e7482
27803 Author: Sascha Laue <sascha.laue@liebherr.com>
27804 Date: Tue May 13 13:29:54 2008 +0200
27806 lwmon5: add memory-pattern-test to FPGA POST.
27808 commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
27809 Author: Becky Bruce <becky.bruce@freescale.com>
27810 Date: Thu May 8 19:02:51 2008 -0500
27812 PPC: 86xx Add bat registers to reginfo command
27814 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27816 commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
27817 Author: Becky Bruce <becky.bruce@freescale.com>
27818 Date: Fri May 9 15:41:35 2008 -0500
27820 PPC: Add print_bats() to lib_ppc/bat_rw.c
27822 This function prints the values of all the BAT register
27823 pairs - I needed this for debug earlier this week; adding it to
27824 lib_ppc so others can use it (and add it to reginfo commands
27827 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27829 commit c148f24c15743a02e855636e6bed013bd121f7f2
27830 Author: Becky Bruce <becky.bruce@freescale.com>
27831 Date: Thu May 15 21:29:04 2008 -0500
27833 PPC: Change lib_ppc/bat_rw.c to use high bats
27835 Currently, this code only deals with BATs 0-3, which makes
27836 it useless on systems that support BATs 4-7. Add the
27837 support for these registers.
27839 Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
27841 commit 31d826722434931e1152a09d140187dcf72f8aac
27842 Author: Becky Bruce <becky.bruce@freescale.com>
27843 Date: Thu May 8 19:02:12 2008 -0500
27845 PPC: Create and use CONFIG_HIGH_BATS
27847 Change all code that conditionally operates on high bat
27848 registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
27849 instead of the myriad ways this is done now. Define the option
27850 for every config for which high bats are supported (and
27851 enabled by early boot, on parts where they're not always
27854 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
27856 commit aa3b8bf9c30065bb2ea852799d32db5020598495
27857 Author: Wolfgang Grandegger <wg@grandegger.com>
27858 Date: Wed May 28 19:55:19 2008 +0200
27860 E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
27862 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
27863 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27865 commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
27866 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
27867 Date: Wed May 28 13:06:25 2008 -0500
27869 ColdFire: Add 10 base ethernet support for mcf5445x
27871 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
27872 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
27874 commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
27875 Author: Jason McMullan <mcmullan@netapp.com>
27876 Date: Fri May 30 00:53:38 2008 +0900
27878 mips: Add an 'include/asm/errno.h', like all other architectures
27880 All other u-boot architectures have an include/asm/errno.h, so
27881 this change adds it to the mips include/asm-mips headers also.
27883 Stolen from Linux 2.6.25.
27885 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
27887 commit e2ad8426624bac457acc6925b6ff408e9bf20466
27888 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27889 Date: Fri May 30 00:53:38 2008 +0900
27891 [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
27893 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27895 commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
27896 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27897 Date: Fri May 30 00:53:38 2008 +0900
27899 [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
27901 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27903 commit bf462ae450a7f2eeeddc699ed345b391e3263540
27904 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27905 Date: Fri May 30 00:53:37 2008 +0900
27907 [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
27909 No functional changes.
27911 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27913 commit 89a1550ec6b74452274a7a23127936e2c7eec711
27914 Author: Jason McMullan <mcmullan@netapp.com>
27915 Date: Fri May 30 00:53:37 2008 +0900
27917 mips: If CONFIG_CMD_SPI is defined, call spi_init()
27919 The mips architecture currently does not call 'spi_init()' in the generic
27920 board initialization routine is CONFIG_CMD_SPI is defined.
27922 This patch rectifies that problem.
27924 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
27925 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27927 commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
27928 Author: Jason McMullan <mcmullan@netapp.com>
27929 Date: Fri May 30 00:53:37 2008 +0900
27931 [MIPS] lib_mips/board.c: Add nand_init
27933 This patch adds the standard 'nand_init()' call to the mips generic
27934 'board_init_r()' call, bringing MIPS in line with the other architectures.
27936 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
27937 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
27939 commit d6ac2ed893c2168738aee01579d6283af8d37045
27940 Author: Scott Wood <scottwood@freescale.com>
27941 Date: Thu May 22 10:49:46 2008 -0500
27943 Remove prototypes of nand_init() in favor of including nand.h.
27945 Likewise with onenand_init().
27947 Signed-off-by: Scott Wood <scottwood@freescale.com>
27949 commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
27950 Author: Scott Wood <scottwood@freescale.com>
27951 Date: Thu May 22 10:49:00 2008 -0500
27953 Make onenand_uboot.h self-sufficient.
27955 Don't assume types are provided by previously included headers.
27957 Signed-off-by: Scott Wood <scottwood@freescale.com>
27959 commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
27960 Author: Dirk Behme <dirk.behme@gmail.com>
27961 Date: Wed Jan 16 14:26:59 2008 +0100
27963 nand: Correct NAND erase percentage output
27965 For NAND erase sizes smaller than one NAND erase block, erase
27966 percentage output becomes grater than 100% e.g.
27970 Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
27971 > nand erase 0x100000 0x2000
27972 NAND erase: device 0 offset 0x100000, size 0x2000
27973 Erasing at 0x100000 -- 200% complete.
27978 Correct this and give user a warning that more is erased than specified:
27981 > nand erase 0x100000 0x2000
27982 NAND erase: device 0 offset 0x100000, size 0x2000
27983 Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
27984 Erasing 0x00004000 instead
27985 Erasing at 0x100000 -- 100% complete.
27990 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
27992 commit 5922db6c0948506be91e0de44e7a6863a18a417f
27993 Author: Stelian Pop <stelian@popies.net>
27994 Date: Tue May 13 17:31:24 2008 +0200
27996 Cleanup nand_info[] declaration.
27998 The nand_info array is declared as extern in several .c files.
27999 Those days, nand.h contains a reference to the array, so there is
28000 no need to declare it elsewhere.
28002 Signed-off-by: Stelian Pop <stelian@popies.net>
28003 Signed-off-by: Scott Wood <scottwood@freescale.com>
28005 commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
28006 Author: Scott Wood <scottwood@freescale.com>
28007 Date: Mon May 19 09:30:43 2008 -0500
28009 NAND: Provide a sane default for NAND_MAX_CHIPS.
28011 This allows the header to be included regardless of whether a board's
28012 config file provides NAND-related defininitions.
28014 Signed-off-by: Scott Wood <scottwood@freescale.com>
28016 commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
28017 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28018 Date: Mon May 26 12:19:10 2008 +0200
28020 avr32: Fix theoretical race in udelay()
28022 If the specified delay is very short, the cycle counter may go past the
28023 "end" time we are waiting for before we get around to reading it.
28025 Fix it by checking the different between the cycle count "now" and the
28026 cycle count at the beginning. This will work as long as the delay
28027 measured in number of cycles is below 2^31.
28029 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28031 commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
28032 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28033 Date: Wed May 21 13:01:09 2008 +0200
28035 avr32: Compile atmel_mci.o conditionally
28037 Remove #ifdef CONFIG_MMC from the source file and use conditional
28038 compilation in the Makefile instead.
28040 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28042 commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
28043 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28044 Date: Thu May 22 12:28:25 2008 +0200
28046 avr32: Fix wrong error flags in atmel_mci driver
28048 Make sure we check for CRC errors when sending commands that use CRC
28051 Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
28052 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28054 commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
28055 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28056 Date: Wed May 21 11:10:59 2008 +0200
28058 avr32: Fix two warnings in atmel_mci.c
28060 The warnings are harmless but annoying. Let's fix them.
28062 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28064 commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
28065 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28066 Date: Mon May 19 11:36:28 2008 +0200
28068 avr32: Rework SDRAM initialization code
28070 This cleans up the SDRAM initialization and related code a bit, and
28071 allows faster booting.
28073 * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
28074 * Remove memory test from sdram_init() and make caller responsible
28075 for verifying the SDRAM and determining its size.
28076 * Remove base_address member from struct sdram_config (was sdram_info)
28077 * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
28078 * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
28080 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28082 commit 95107b7c028806919630bf02c653aa8f4f867c94
28083 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28084 Date: Mon May 19 11:27:37 2008 +0200
28086 avr32: Do stricter stack checking in the exception handler
28088 Don't do a stack dump if the stack pointer is outside the memory area
28089 reserved for stack.
28091 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28093 commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
28094 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28095 Date: Fri May 2 15:32:57 2008 +0200
28097 avr32: Use the same entry point for reset and exception handling
28099 Since the reset vector is always aligned to a very large boundary, we
28100 can save a couple of KB worth of alignment padding by placing the
28101 exception vectors at the same address.
28103 Deciding which one it is is easy: If we're handling an exception, the
28104 CPU is in Exception mode. If we're starting up after reset, the CPU is
28105 in Supervisor mode. So this adds a very minimal overhead to the reset
28106 path (only executed once) and the exception handling path (normally
28107 never executed at all.)
28109 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28111 commit 0c16eed2189a190bd5655b33c029f809a9b31128
28112 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28113 Date: Fri May 2 15:24:22 2008 +0200
28115 avr32: Put memset in its own section
28117 All C code is compiled with -ffunction-sections -fdata-sections.
28118 Assembly functions should get their own sections as well so that
28119 everything looks consistent.
28121 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28123 commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
28124 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28125 Date: Fri May 2 15:21:40 2008 +0200
28127 avr32: Rename pm_init() as clk_init() and make SoC-specific
28129 pm_init() was always more about clock initialization than anything
28130 else. Dealing with PLLs, clock gating and such is also inherently
28131 SoC-specific, so move it into a SoC-specific directory.
28133 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28135 commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
28136 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28137 Date: Wed Apr 30 16:15:57 2008 +0200
28139 avr32: Use new-style Makefile for the at32ap platform
28141 This makes it easier to avoid compiling certain files later.
28143 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28145 commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
28146 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28147 Date: Wed Apr 30 14:36:47 2008 +0200
28149 avr32: Remove unused file cpu/at32ap/pm.c
28151 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28153 commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
28154 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28155 Date: Wed Apr 30 14:19:28 2008 +0200
28157 avr32: Clean up the HMATRIX code
28159 Rework the HMATRIX configuration interface so that it becomes easier
28160 to configure the HMATRIX for boards with special needs, and add new
28163 The HMATRIX header file has been split into a general,
28164 chip-independent part with register definitions, etc. and a
28165 chip-specific part with SFR bitfield definitions and master/slave
28168 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28170 commit 0a2e48792dd372c90b80059f3235e67a567e16fc
28171 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28172 Date: Thu Nov 22 12:14:11 2007 +0100
28174 avr32: Add support for the ATSTK1006 board
28176 This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
28177 board. It's currently in production and will be available soon.
28179 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28181 commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
28182 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28183 Date: Tue Apr 29 12:53:05 2008 +0200
28185 avr32: Get rid of the .flashprog section
28187 The .flashprog section was only needed back when we were running
28188 directly from flash, and it's even more useless on NGW100 since it
28189 uses the CFI flash driver which never used this workaround in the
28192 Remove it on STK1000 as well, and get rid of all the associated code and
28195 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28197 commit cdd42c0c7a5205fc380912d83229069a71ea3abf
28198 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28199 Date: Wed Apr 30 13:09:56 2008 +0200
28201 avr32: Use correct condition around macb clock accessors
28203 get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
28204 the chip has a MACB controller, not when it has a USART.
28206 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28208 commit f793a3581901ff39c2abb94012d9bbc8573ccf02
28209 Author: David Brownell <david-b@pacbell.net>
28210 Date: Wed Apr 16 22:57:58 2008 -0700
28212 avr32: Disable the AP7000 internal watchdog on startup
28214 This patch forces the watchdog off in all cases. That will at least
28215 get rid of the constant reboot cycle, though it won't let the watchdog
28216 actually run in the new kernels: its probe() comes up with a polite
28219 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28221 commit 55ac7a7490b55da56659f95d82a0c83b9756df27
28222 Author: David Brownell <david-b@pacbell.net>
28223 Date: Fri Feb 22 12:54:39 2008 -0800
28225 avr32: stk1002 and ngw100 convergence
28227 Make STK1002 and NGW100 boards act more alike:
28228 - STK boards can use as many arguments as NGW
28229 - STK boards don't need to manage FPGAs either
28230 - NGW commands should match STK ones
28232 Also spell U-Boot right in prompts for STK1002 and NGW100.
28234 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
28235 [haavard.skinnemoen@atmel.com: update STK100[34] as well]
28236 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
28238 commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
28239 Author: Sergei Poselenov <sposelenov@emcraft.com>
28240 Date: Tue May 27 13:47:00 2008 +0200
28242 Socrates: Fix PCI bus frequency report
28244 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28246 commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
28247 Author: Sergei Poselenov <sposelenov@emcraft.com>
28248 Date: Tue May 27 11:49:13 2008 +0200
28250 Socrates: Added USB support.
28252 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28254 commit 5a904e5637cff1d708dc67098004f83ba9e84c54
28255 Author: Sergei Poselenov <sposelenov@emcraft.com>
28256 Date: Tue May 27 11:35:02 2008 +0200
28258 USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
28260 In case of several PCI USB controllers on a board this variable
28261 specifys which controller to use.
28262 See doc/README.generic_usb_ohci for details.
28264 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28266 commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
28267 Author: Sergei Poselenov <sposelenov@emcraft.com>
28268 Date: Tue May 27 10:36:07 2008 +0200
28270 Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
28272 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28274 commit 83e9d7a2614d4006b92690afa3390c291734267e
28275 Author: Sergei Poselenov <sposelenov@emcraft.com>
28276 Date: Mon May 26 18:16:04 2008 +0200
28278 Socrates: Config file cleanup.
28280 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28282 commit 602cac1389b755b223272f2328a47e6f8c240848
28283 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28284 Date: Sat May 24 12:47:46 2008 +0200
28286 MAKEALL: add at91 list
28288 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28290 commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
28291 Author: Ron Madrid <ron_madrid@sbcglobal.net>
28292 Date: Fri May 23 15:37:05 2008 -0700
28294 Add Marvell 88E1118 support for TSEC
28296 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
28297 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28299 commit 557b377d8bfc8b833b6e749457bcdfa298331a24
28300 Author: Jens Gehrlein <sew_s@tqs.de>
28301 Date: Mon May 5 14:06:11 2008 +0200
28303 smc911x: add 16 bit support
28305 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
28306 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
28308 commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
28309 Author: Christian Eggers <ceggers@gmx.de>
28310 Date: Wed May 21 21:29:10 2008 +0200
28312 Fix endianess conversion in usb_ohci.c
28314 Sorry, I forgot this line:
28316 Signed-off-by: Christian Eggers <ceggers@gmx.de>
28318 I think this must be swapped (result may be equal).
28320 commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
28321 Author: Christian Eggers <ceggers@gmx.de>
28322 Date: Wed May 21 22:12:00 2008 +0200
28324 USB: replace old swap_ with proper endianess conversion macros
28326 Signed-off-by: Christian Eggers <ceggers@gmx.de>
28327 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
28329 commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
28330 Author: Christian Eggers <ceggers@gmx.de>
28331 Date: Wed May 21 21:29:10 2008 +0200
28333 Fix endianess conversion in usb_ohci.c
28335 Signed-off-by: Christian Eggers <ceggers@gmx.de>
28336 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
28338 commit 477434c63c2ea5baa5c6c4e43500786f436511ff
28339 Author: Sergei Poselenov <sposelenov@emcraft.com>
28340 Date: Thu May 22 01:15:53 2008 +0200
28342 USB: add support for multiple PCI OHCI controllers
28344 Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
28345 In case of several PCI USB controllers on a board this variable
28346 specifys which controller to use.
28348 Also add USB support for sokrates board.
28350 See doc/README.generic_usb_ohci for details.
28352 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28353 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
28355 commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
28356 Author: Wolfgang Denk <wd@denx.de>
28357 Date: Wed May 21 16:56:08 2008 +0200
28359 Fix some whitespace issues
28361 introduced by 53677ef18 "Big white-space cleanup."
28363 Signed-off-by: Wolfgang Denk <wd@denx.de>
28365 commit 4416603aeb06861b468b06a981e52c3ff805db7b
28366 Author: York Sun <yorksun@freescale.com>
28367 Date: Mon May 12 14:36:39 2008 -0500
28369 Make ads5121 out-of-tree compiling safe
28371 Reuse the existing DIU driver in board/freescale/common.
28373 Signed-off-by: York Sun <yorksun@freescale.com>
28375 commit 0e1bad47cd345c76c91a64caf41011e431b62599
28376 Author: York Sun <yorksun@freescale.com>
28377 Date: Mon May 5 10:20:01 2008 -0500
28379 Adding DIU support for Freescale 5121ADS
28381 Add DIU and cfb console support to FSL 5121ADS board.
28383 Use #define CONFIG_VIDEO in config file to enable fb console.
28385 Signed-off-by: York Sun <yorksun@freescale.com>
28387 commit a48ff68d235e671176f6b496c44246dbe5e0a93f
28388 Author: York Sun <yorksun@freescale.com>
28389 Date: Mon May 5 10:20:00 2008 -0500
28391 Replace DPRINTF with debug
28393 Remove DPRINTF macro and replace it with generic debug macro.
28395 Signed-off-by: York Sun <yorksun@freescale.com>
28397 commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
28398 Author: York Sun <yorksun@freescale.com>
28399 Date: Mon May 5 10:19:59 2008 -0500
28401 Move pixel clock setting to board file
28403 The clock divider has different format in 5121 and 8610. This patch moves it to
28404 board specific code.
28406 Signed-off-by: York Sun <yorksun@freescale.com>
28408 commit 53677ef18e25c97ac613349087c5cb33ae5a2741
28409 Author: Wolfgang Denk <wd@denx.de>
28410 Date: Tue May 20 16:00:29 2008 +0200
28412 Big white-space cleanup.
28414 This commit gets rid of a huge amount of silly white-space issues.
28415 Especially, all sequences of SPACEs followed by TAB characters get
28416 removed (unless they appear in print statements).
28418 Also remove all embedded "vim:" and "vi:" statements which hide
28419 indentation problems.
28421 Signed-off-by: Wolfgang Denk <wd@denx.de>
28423 commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
28424 Author: Sergei Poselenov <sposelenov@emcraft.com>
28425 Date: Thu May 8 17:46:23 2008 +0200
28427 socrates: fix second TSEC configuration (it is actually TSEC3)
28429 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28431 commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
28432 Author: Sergei Poselenov <sposelenov@emcraft.com>
28433 Date: Thu May 8 14:17:08 2008 +0200
28435 Fixed reset for socrates
28437 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28439 commit e18575d5f589a62e19c70d471d4b4e27cad3af56
28440 Author: Sergei Poselenov <sposelenov@emcraft.com>
28441 Date: Wed May 7 15:10:49 2008 +0200
28443 socrates: changes to support FDT
28445 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28446 Signed-off-by: Wolfgang Denk <wd@denx.de>
28448 commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
28449 Author: Sergei Poselenov <sposelenov@emcraft.com>
28450 Date: Wed Apr 30 11:42:50 2008 +0200
28452 Initial support for "Socrates" board
28454 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
28456 commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
28457 Author: Yuri Tikhonov <yur@emcraft.com>
28458 Date: Thu May 8 15:46:42 2008 +0200
28460 POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
28462 This way we become able to utilize the full post_log_word for POST
28463 activities (overwise, POST ECC, which has 0x8000 ID, could be
28464 erroneously treated as started in post_output_backlog() even if there
28465 was actually no POST ECC run (because of OCM POST failure, for
28468 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
28470 commit 7845d49094c81321021b50a4dbb8864d2f3777e4
28471 Author: Yuri Tikhonov <yur@emcraft.com>
28472 Date: Thu May 8 15:46:02 2008 +0200
28474 POST: mark OCM test as POST_STOP
28476 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
28478 commit 28a385065882d6cb6ac5f443311ff87887ed7c13
28479 Author: Yuri Tikhonov <yur@emcraft.com>
28480 Date: Thu May 8 15:45:26 2008 +0200
28482 POST: add POST_STOP flag
28484 Don't run futher tests in case of a test fails that is marked as
28487 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
28488 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
28490 commit a525145d8110d15b4389d23c3ea8a78f22509d3f
28491 Author: Yuri Tikhonov <yur@emcraft.com>
28492 Date: Thu May 8 15:44:16 2008 +0200
28494 POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
28496 Switch the OCM testid with the codec one. The reason is that current
28497 implementation requires the POST_ROM testid to fit into lower 16
28498 bits, and the codec test will never run with POST_ROM hopefully.
28500 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
28502 commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
28503 Author: Yuri Tikhonov <yur@emcraft.com>
28504 Date: Thu May 8 15:43:28 2008 +0200
28506 lwmon5: enable OCM post test on lwmon5 board
28508 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
28510 commit 6e8ec682268493b8d098f99e17b1ce71b4448977
28511 Author: Yuri Tikhonov <yur@emcraft.com>
28512 Date: Thu May 8 15:42:47 2008 +0200
28514 POST: OCM test added.
28516 Added OCM test to POST layer. This version runs before all other tests
28517 but doesn't yet interrupt post sequence on failure.
28519 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
28520 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
28522 commit 6891260bdd935a382c95d9fa333922b0dfded68a
28523 Author: Yuri Tikhonov <yur@emcraft.com>
28524 Date: Thu May 8 15:40:39 2008 +0200
28528 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
28530 commit 727f63334676e760877d43bfb8f0e9331ac8b101
28531 Author: Hebbar <gururajakr@sanyo.co.in>
28532 Date: Tue May 20 02:16:36 2008 -0700
28534 common/usb.c: fix incorrect escape sequence
28536 Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
28538 commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
28539 Author: York Sun <yorksun@freescale.com>
28540 Date: Thu May 15 15:26:27 2008 -0500
28542 Fix 8313ERDB board configuration
28544 Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
28545 Correct TSEC1 vs TSEC2 assignment.
28546 Define ETHADDR and ETH1ADDR always.
28548 Signed-off-by: York Sun <yorksun@freescale.com>
28549 Signed-off-by: Timur Tabi <timur@freescale.com>
28551 commit 2c289e320dcfb3760e99cf1d765cb067194a1202
28552 Author: Jon Loeliger <jdl@freescale.com>
28553 Date: Mon May 19 09:47:25 2008 -0500
28555 mpc86xx: Removed unused and unconfigured memory test code.
28557 Besides, other common code exists.
28559 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28561 commit 180a90abdae72587c0f679edf8991455e559440d
28562 Author: Wolfgang Denk <wd@denx.de>
28563 Date: Mon May 19 12:47:11 2008 +0200
28567 Update CHANGELOG for release.
28569 Signed-off-by: Wolfgang Denk <wd@denx.de>
28571 commit 16bedc661de0dae767b1377d8413373a3fbcfa79
28572 Author: Stefan Roese <sr@denx.de>
28573 Date: Mon May 19 07:14:38 2008 +0200
28575 ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
28577 When SATA is selected (via jumper J6) we need to disable the first PCIe
28578 node in the device tree, so that Linux doesn't initialize it. Otherwise
28579 the Linux SATA driver will fail to detect the devices.
28581 The same goes the other way around too. So if PCIe is selected we need
28582 to disable the SATA node in the device tree.
28584 This is because PCIe port 0 and SATA on 460EX share the same pins
28585 (multiplexed) and we have to configure in U-Boot which peripheral is
28588 Signed-off-by: Stefan Roese <sr@denx.de>
28590 commit 3cc27b426aeefe2930f911692e9df3143fb2565f
28591 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28592 Date: Sun May 18 19:09:58 2008 +0200
28594 i386: Fix multiple definitions of __show_boot_progress
28596 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28598 commit 311f3446930c1e64c12026c1cfd00500b05be52d
28599 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28600 Date: Sun May 18 19:09:57 2008 +0200
28602 sc530_spunk: add missing SOBJS entry
28604 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28606 commit a559317143b4f95927b08cd388707e6f077e95fa
28607 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28608 Date: Sun May 18 19:09:56 2008 +0200
28610 sc520_spunk: Fix flash
28612 flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
28613 flash.c:398: error: label at end of compound statement
28615 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28617 commit 91f221317af64191ee8caf303ea9305943158691
28618 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28619 Date: Sun May 18 19:09:49 2008 +0200
28621 drivers/pcmcia: add missing i82365
28623 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28625 commit dd223944132f97ffa52977ea95e5a52428f5cc2f
28626 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28627 Date: Sun May 18 19:09:47 2008 +0200
28629 i386/bootm: remove unused var
28631 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28633 commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
28634 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28635 Date: Sun May 18 19:09:45 2008 +0200
28637 example/gitignore: update with all generated examples
28639 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28641 commit a38dc3ea8614f8b0c41e432b445a9959b9711295
28642 Author: Wolfgang Denk <wd@denx.de>
28643 Date: Thu May 15 00:42:45 2008 +0200
28645 TQM8272: fix out-of-tree building
28647 ...and add to MAKEALL script
28649 Signed-off-by: Wolfgang Denk <wd@denx.de>
28651 commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
28652 Author: Wolfgang Denk <wd@denx.de>
28653 Date: Wed May 14 23:34:53 2008 +0200
28655 environment: fix bug introduced by commit a8409f4f1ac8
28657 env_get_char is not a function, but a pointer to one.
28659 Signed-off-by: Wolfgang Denk <wd@denx.de>
28661 commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
28662 Author: Gary Jennejohn <garyj@denx.de>
28663 Date: Wed May 14 13:39:22 2008 +0200
28665 ppc4xx: QUAD100HD: Allow the environment to be put into flash.
28667 After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
28668 use a redundant environment.
28670 Signed-off-by: Gary Jennejohn <garyj@denx.de>
28672 commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
28673 Author: Wolfgang Denk <wd@denx.de>
28674 Date: Wed May 14 13:55:30 2008 +0200
28676 Fix config files for out-of-tree building
28678 Several board/<...>/config.mk files include dynamically built (by
28679 the Makefile) config files but used the wrong file name of
28680 $(TOPDIR)/board/$(BOARDDIR)/config.tmp
28681 instead if the correct
28682 $(OBJTREE)/board/$(BOARDDIR)/config.tmp
28684 The bug is nasty because the build result is correct for the (normal)
28685 in-tree builds, and because 'sinclude' is used no errors get raised
28686 even for out-of-tree build tests. But out-of-tree builds use an
28687 incomplete and thus usually incorrect configuration...
28689 Signed-off-by: Wolfgang Denk <wd@denx.de>
28691 commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
28692 Author: Stefan Roese <sr@denx.de>
28693 Date: Wed May 14 13:40:03 2008 +0200
28695 ppc4xx: Fix bogus Canyonlands config.mk
28697 This patch fixes the canyonlands config.mk file to enable correct
28698 out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
28700 Signed-off-by: Stefan Roese <sr@denx.de>
28702 commit fdd1247a66d788a3446244f6fde9955a93c26322
28703 Author: Stefan Roese <sr@denx.de>
28704 Date: Wed May 14 10:32:32 2008 +0200
28706 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
28708 Canyonlands has a file ddr2_fixed.c which needs special treatment when
28709 building in separate directory. It has to be linked to build directory
28710 otherwise it is not seen.
28712 Signed-off-by: Stefan Roese <sr@denx.de>
28714 commit a8409f4f1ac84c36273c1a1e341189662521bcfb
28715 Author: Wolfgang Denk <wd@denx.de>
28716 Date: Wed May 14 12:22:49 2008 +0200
28718 environment: cleanup prototype declarations of env functions.
28720 Signed-off-by: Wolfgang Denk <wd@denx.de>
28722 commit cf39b07948015c480b72a6e732cf7d839aa93a9e
28723 Author: Wolfgang Denk <wd@denx.de>
28724 Date: Wed May 14 12:21:48 2008 +0200
28726 linkstation_HGLAN: Fix out of tree building.
28728 Signed-off-by: Wolfgang Denk <wd@denx.de>
28730 commit 085551c05ca09e6c491ea11a1c6727a36776a545
28731 Author: Stefan Roese <sr@denx.de>
28732 Date: Wed May 14 10:32:32 2008 +0200
28734 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
28736 Canyonlands has a file ddr2_fixed.c which needs special treatment when
28737 building in separate directory. It has to be linked to build directory
28738 otherwise it is not seen.
28740 Signed-off-by: Stefan Roese <sr@denx.de>
28742 commit 1510b82d50615f344e89d42533e8224cce067dc0
28743 Author: Wolfgang Denk <wd@denx.de>
28744 Date: Tue May 13 23:15:52 2008 +0200
28746 Makefile: fix "error: version_autogenerated.h: No such file or directory"
28748 Signed-off-by: Wolfgang Denk <wd@denx.de>
28750 commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
28751 Author: Stelian Pop <stelian@popies.net>
28752 Date: Tue May 13 17:31:24 2008 +0200
28754 Cleanup nand_info[] declaration.
28756 The nand_info array is declared as extern in several .c files.
28757 Those days, nand.h contains a reference to the array, so there is
28758 no need to declare it elsewhere.
28760 Signed-off-by: Stelian Pop <stelian@popies.net>
28761 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28763 commit 70fab1908fc1734a403711eaabbef546bc4b77dc
28764 Author: Stefan Roese <sr@denx.de>
28765 Date: Tue May 13 20:22:01 2008 +0200
28767 ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
28769 Signed-off-by: Stefan Roese <sr@denx.de>
28771 commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
28772 Author: Wolfgang Denk <wd@denx.de>
28773 Date: Mon May 12 01:11:21 2008 +0200
28775 Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
28777 This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
28778 which broke many PowerPC boards.
28780 commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
28781 Author: Wolfgang Denk <wd@denx.de>
28782 Date: Mon May 12 00:56:28 2008 +0200
28784 Revert "Avoid initrd and logbuffer area overlaps"
28786 This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
28787 which breaks building on all PPC boards that don't use a log buffer.
28789 commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
28790 Author: Nick Spence <nick.spence@freescale.com>
28791 Date: Sat May 10 14:02:04 2008 -0700
28793 Fix offset calculation for multi-type legacy images.
28795 Calculation of tail was incorrect when size % 4 == 0.
28797 New code removes the conditional and does the same thing but with arithmetic
28799 Signed-off-by: Nick Spence <nick.spence@freescale.com>
28801 commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
28802 Author: Wolfgang Denk <wd@denx.de>
28803 Date: Mon May 12 00:40:58 2008 +0200
28805 Revert "Change env_get_char from a global function ptr to a function."
28807 This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
28808 which is known to break booting from dataflash and NAND.
28810 commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
28811 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28812 Date: Sun May 11 23:13:57 2008 +0200
28814 API: remove duplicate syscall check
28816 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28818 commit 67e3beb52c320b0a31cf030716c99392cde2d532
28819 Author: Stelian Pop <stelian@popies.net>
28820 Date: Fri May 9 21:46:51 2008 +0200
28822 AT91: Cleanup unused config header file definitions.
28824 CONFIG_ENV_OVERWRITE is commented out in the config header files,
28825 so let's cleanup the files by removing the whole definition.
28827 Signed-off-by: Stelian Pop <stelian@popies.net>
28828 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28830 commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
28831 Author: Stelian Pop <stelian@popies.net>
28832 Date: Thu May 8 14:52:34 2008 +0200
28834 Support AT91CAP9 revC CPUs
28836 The AT91CAP9 revC CPU has a few differences over the previous,
28837 revB CPU which was distributed in small quantities only (revA was
28838 an internal Atmel product only).
28840 The revC silicon needs a special initialisation sequence to
28841 switch from the internal (imprecise) RC oscillator to the
28842 external 32k clock.
28844 Signed-off-by: Stelian Pop <stelian@popies.net>
28845 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28847 commit 098b7b4b441b12c2a64dd517930f43c793542759
28848 Author: Stelian Pop <stelian@popies.net>
28849 Date: Thu May 8 14:52:33 2008 +0200
28851 Use custom logo for Atmel boards
28853 This patch adds a custom vendor logo for the Atmel AT91 boards.
28855 Signed-off-by: Stelian Pop <stelian@popies.net>
28856 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28858 commit 761c70b80cdd3bead40146b96a8e713d6ae01632
28859 Author: Stelian Pop <stelian@popies.net>
28860 Date: Thu May 8 14:52:32 2008 +0200
28862 AT91SAM9RLEK: hook up the ATMEL LCD driver
28864 This patch makes the necessary adaptations (PIO configurations and
28865 defines in config header file) to hook up the Atmel LCD driver to the
28866 AT91SAM9RLEK board.
28868 Signed-off-by: Stelian Pop <stelian@popies.net>
28869 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28871 commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
28872 Author: Stelian Pop <stelian@popies.net>
28873 Date: Thu May 8 14:52:31 2008 +0200
28875 AT91SAM9263EK: hook up the ATMEL LCD driver
28877 This patch makes the necessary adaptations (PIO configurations and
28878 defines in config header file) to hook up the Atmel LCD driver to the
28879 AT91SAM9263EK board.
28881 Signed-off-by: Stelian Pop <stelian@popies.net>
28882 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28884 commit 820f2a958325061a446115f3035e48e4726b3390
28885 Author: Stelian Pop <stelian@popies.net>
28886 Date: Thu May 8 14:52:30 2008 +0200
28888 AT91SAM9261EK: hook up the ATMEL LCD driver
28890 This patch makes the necessary adaptations (PIO configurations and
28891 defines in config header file) to hook up the Atmel LCD driver to the
28892 AT91SAM9261EK board.
28894 Signed-off-by: Stelian Pop <stelian@popies.net>
28895 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28897 commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
28898 Author: Stelian Pop <stelian@popies.net>
28899 Date: Thu May 8 14:52:29 2008 +0200
28901 AT91CAP9ADK: hook up the ATMEL LCD driver
28903 This patch makes the necessary adaptations (PIO configurations and
28904 defines in config header file) to hook up the Atmel LCD driver to the
28907 Signed-off-by: Stelian Pop <stelian@popies.net>
28908 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28910 commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
28911 Author: Stelian Pop <stelian@popies.net>
28912 Date: Fri May 9 21:57:18 2008 +0200
28914 Add ATMEL LCD driver
28916 This patch adds support for the ATMEL LCDC driver which is used on some
28917 AT91 and AVR platforms.
28919 Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
28920 AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
28922 Signed-off-by: Stelian Pop <stelian@popies.net>
28923 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28925 commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
28926 Author: Stelian Pop <stelian@popies.net>
28927 Date: Thu May 8 18:52:25 2008 +0200
28929 AT91SAM9RLEK support
28931 This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
28934 Signed-off-by: Stelian Pop <stelian@popies.net>
28935 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28937 commit 8e429b3eee23927c1222679f6b6f53667b21595c
28938 Author: Stelian Pop <stelian@popies.net>
28939 Date: Thu May 8 18:52:23 2008 +0200
28941 AT91SAM9263EK support
28943 This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
28946 Signed-off-by: Stelian Pop <stelian@popies.net>
28947 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28949 commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
28950 Author: Stelian Pop <stelian@popies.net>
28951 Date: Thu May 8 20:52:22 2008 +0200
28953 AT91SAM9261EK support
28955 This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
28958 Signed-off-by: Stelian Pop <stelian@popies.net>
28959 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28961 commit 86c8c8a414988c50104a3b02c29f50af2be738c0
28962 Author: Stelian Pop <stelian@popies.net>
28963 Date: Thu May 8 20:52:21 2008 +0200
28965 AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
28967 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
28968 in order to cope with the changes in DataFlash partitionning scheme
28971 Signed-off-by: Stelian Pop <stelian@popies.net>
28972 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28974 commit 96996ac25d5222611a8888968db6e53a6d3726da
28975 Author: Stelian Pop <stelian@popies.net>
28976 Date: Thu May 8 20:52:20 2008 +0200
28978 AT91SAM9260EK: Normalize BOOTARGS
28980 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
28981 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
28984 Signed-off-by: Stelian Pop <stelian@popies.net>
28985 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28987 commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
28988 Author: Stelian Pop <stelian@popies.net>
28989 Date: Thu May 8 20:52:19 2008 +0200
28991 AT91SAM9260EK: Normalize SPI timings
28993 This patch changes the SPI timings to closely match the ones
28994 used by the Linux kernel and the Atmel's own bootstrap project.
28996 Signed-off-by: Stelian Pop <stelian@popies.net>
28997 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28999 commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
29000 Author: Stelian Pop <stelian@popies.net>
29001 Date: Thu May 8 20:52:18 2008 +0200
29003 AT91SAM9260EK: Handle 8 or 16 bit NAND
29005 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
29006 makes the support configurable in the board config header file
29007 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
29009 Signed-off-by: Stelian Pop <stelian@popies.net>
29010 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29012 commit ab52640fc01624e208424e527af0b7b3a5a65a12
29013 Author: Stelian Pop <stelian@popies.net>
29014 Date: Thu May 8 20:52:17 2008 +0200
29016 AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
29018 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
29019 in order to cope with the changes in DataFlash partitionning scheme
29022 Signed-off-by: Stelian Pop <stelian@popies.net>
29023 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29025 commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
29026 Author: Stelian Pop <stelian@popies.net>
29027 Date: Thu May 8 20:52:16 2008 +0200
29029 AT91CAP9ADK: Normalize BOOTARGS
29031 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
29032 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
29035 Signed-off-by: Stelian Pop <stelian@popies.net>
29036 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29038 commit 93da48b910511911ce110656e17ed733c8ac4c45
29039 Author: Stelian Pop <stelian@popies.net>
29040 Date: Thu May 8 20:52:15 2008 +0200
29042 AT91CAP9ADK: Normalize SPI timings
29044 This patch changes the SPI timings to closely match the ones
29045 used by the Linux kernel and the Atmel's own bootstrap project.
29047 Signed-off-by: Stelian Pop <stelian@popies.net>
29048 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29050 commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
29051 Author: Stelian Pop <stelian@popies.net>
29052 Date: Thu May 8 20:52:14 2008 +0200
29054 AT91CAP9ADK: Handle 8 or 16 bit NAND
29056 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
29057 makes the support configurable in the board config header file
29058 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
29060 Signed-off-by: Stelian Pop <stelian@popies.net>
29061 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29063 commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
29064 Author: Stelian Pop <stelian@popies.net>
29065 Date: Thu May 8 20:52:13 2008 +0200
29067 Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
29069 All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
29070 below avoids the duplication of u-boot.lds by putting the file in the
29071 cpu directory instead of the board one.
29073 Signed-off-by: Stelian Pop <stelian@popies.net>
29074 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29076 commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
29077 Author: Stelian Pop <stelian@popies.net>
29078 Date: Thu May 8 20:52:12 2008 +0200
29080 Add proper copyright notices in Atmel boards Makefiles
29082 The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
29083 copyright notice. This patch adds the missing pieces.
29085 Signed-off-by: Stelian Pop <stelian@popies.net>
29086 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29088 commit e817a042cef6164bf26fee86f90326f2ec9e6745
29089 Author: Stelian Pop <stelian@popies.net>
29090 Date: Thu May 8 20:52:11 2008 +0200
29092 Add copyright information in Atmel boards partition.c
29094 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
29095 the new created files. This patch fixes the problem.
29097 Signed-off-by: Stelian Pop <stelian@popies.net>
29098 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29100 commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
29101 Author: Stelian Pop <stelian@popies.net>
29102 Date: Thu May 8 20:52:10 2008 +0200
29104 Update origin and copyright information in arch-at91sam9 header files
29106 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
29107 copied from the Linux kernel sources. This patch explicitly specifies
29108 this origin for all the copied headers, and for those missing copyright
29109 information, adds it.
29111 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
29112 in the latest kernel sources by 'at91sam9_smc.h'.
29114 The copyright information has been confirmed by the AT91 Linux kernel
29115 maintainer, Andrew Victor <avictor.za@gmail.com>.
29117 Signed-off-by: Stelian Pop <stelian@popies.net>
29118 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29120 commit 79dd1712689d6a5031d7cbff54957049680751c7
29121 Author: Markus Klotzbücher <mk@denx.de>
29122 Date: Thu May 8 16:00:55 2008 +0200
29124 ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
29126 When using dhcp/bootp the "netmask" environment variable is not set
29127 because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
29128 desireable, so the following patch adds this this option to the board
29131 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29132 Signed-off-by: Stefan Roese <sr@denx.de>
29134 commit 869d14b4cc2e47de2ddcb117bad0407a44436684
29135 Author: Stefan Roese <sr@denx.de>
29136 Date: Sat May 10 10:30:36 2008 +0200
29138 ppc4xx: Update Makalu defconfig to use device-tree booting as default
29140 This patch reworks the default environment on Makalu. Now "net_nfs" for
29141 example uses the device-tree style booting formerly know as "net_nfs_fdt".
29142 Also the addresses in RAM were changed because of the new image booting
29143 support, which check for image overwriting. So the addresses needed to
29146 Signed-off-by: Stefan Roese <sr@denx.de>
29148 commit f3612a7b199cab3942f60d9c1392eb39d58cc699
29149 Author: Becky Bruce <bgill@freescale.com>
29150 Date: Wed May 7 13:28:16 2008 -0500
29152 PPC: fix map_physmem build warning
29154 map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
29155 enabled. This quiets the warning.
29157 Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
29159 commit 36f32675f40292002ee1fed252c180a43022d2d4
29160 Author: Becky Bruce <bgill@freescale.com>
29161 Date: Wed May 7 13:24:57 2008 -0500
29163 Update pci code to use phys_addr_t
29165 Physical addrs need to be represented by phys_addr_t, not
29166 unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
29167 are going to fail mightily.
29169 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
29171 commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
29172 Author: Nick Spence <nick.spence@freescale.com>
29173 Date: Thu May 8 22:32:22 2008 -0700
29175 Support legacy multi-type images without FDT section.
29177 This patch enables legacy multi-type images containing only a Linux kernel
29178 and root file system to be loaded, maintaining compatibility with previous
29179 versions of u-boot.
29181 This is required when using old image files such as a Linux 2.4 kernel /
29184 Signed-off-by: Nick Spence <nick.spence@freescale.com>
29185 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
29187 commit 881031d9732783b7aeae2198fc7eb480ae8974a6
29188 Author: Wolfgang Denk <wd@denx.de>
29189 Date: Sat May 10 00:38:02 2008 +0200
29193 Signed-off-by: Wolfgang Denk <wd@denx.de>
29195 commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
29196 Author: Wolfgang Denk <wd@denx.de>
29197 Date: Sat May 10 00:36:09 2008 +0200
29199 post/cpu/ppc4xx/Makefile: line length cleanup
29201 Signed-off-by: Wolfgang Denk <wd@denx.de>
29203 commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
29204 Author: Stelian Pop <stelian@popies.net>
29205 Date: Thu May 8 22:52:09 2008 +0200
29207 Fix @ -> <at> substitution
29209 When applying the AT91CAP9 patches upstream, something transformed
29210 the '@' character into the ' <at> ' sequence.
29212 The patch below restores the original form in all the places where
29213 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
29214 were copied from AT91CAP9, and a couple of other files where the
29215 ' <at> ' sequence was present).
29217 Signed-off-by: Stelian Pop <stelian@popies.net>
29219 commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
29220 Author: Stelian Pop <stelian@popies.net>
29221 Date: Thu May 8 22:52:10 2008 +0200
29223 Update origin and copyright information in arch-at91sam9 header files
29225 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
29226 copied from the Linux kernel sources. This patch explicitly specifies
29227 this origin for all the copied headers, and for those missing copyright
29228 information, adds it.
29230 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
29231 in the latest kernel sources by 'at91sam9_smc.h'.
29233 The copyright information has been confirmed by the AT91 Linux kernel
29234 maintainer, Andrew Victor <avictor.za@gmail.com>.
29236 Signed-off-by: Stelian Pop <stelian@popies.net>
29238 commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
29239 Author: Stelian Pop <stelian@popies.net>
29240 Date: Thu May 8 22:52:11 2008 +0200
29242 Add copyright information in Atmel boards partition.c
29244 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
29245 the new created files. This patch fixes the problem.
29247 Signed-off-by: Stelian Pop <stelian@popies.net>
29249 commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
29250 Author: Guennadi Liakhovetski <lg@denx.de>
29251 Date: Thu May 8 10:09:27 2008 +0200
29253 mx31ads: fix 32kHz clock handling
29255 According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
29256 oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
29257 Also fix a typo when verifying a jumper configuration. While at it, make
29258 two needlessly global functions static.
29260 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
29262 commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
29263 Author: Marian Balakowicz <m8@semihalf.com>
29264 Date: Wed May 7 13:10:04 2008 +0200
29266 Avoid initrd and logbuffer area overlaps
29268 Add logbuffer to reserved LMB areas to prevent initrd allocation
29269 from overlaping with it.
29271 Make sure to use correct logbuffer base address.
29273 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
29275 commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
29276 Author: Marian Balakowicz <m8@semihalf.com>
29277 Date: Wed May 7 13:08:54 2008 +0200
29279 ppc: Cleanup get_effective_memsize() use
29281 Removed duplicated effective memory size calculation code.
29283 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
29285 commit 273c37d843d5b581090378016cd12dd9c586907b
29286 Author: Marian Balakowicz <m8@semihalf.com>
29287 Date: Wed May 7 09:03:53 2008 +0200
29289 Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
29291 Recent modifcations to LOGBUFFER handling code were incorrecly
29292 introduced to fit_check_kernel() routine during
29293 "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
29294 commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
29296 This patch cleans up this merge issue.
29298 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
29300 commit bc11756daff89a3de09ca80adac962b88cf06e6e
29301 Author: Grant Erickson <gerickson@nuovations.com>
29302 Date: Tue May 6 20:16:15 2008 -0700
29304 Propagate Error Status to the Shell on fw_printenv Errors
29306 Changed implementation such that fw_printenv returns failure status
29307 when one or more specified variables do not exist or when incorrect
29308 command syntax is used.
29310 This aids scripting fw_printenv such that the script can key of the
29311 return status rather than relying on standard error "scraping".
29313 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
29314 Signed-off-by: Wolfgang Denk <wd@denx.de>
29316 commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
29317 Author: Grant Erickson <gerickson@nuovations.com>
29318 Date: Tue May 6 16:18:00 2008 -0700
29320 Fix Compilation Errors with 'tools/env/fw_printenv'
29322 In the current top-of-tree, 1.3.3.-rc2, the optional tool
29323 'tools/env/fw_printenv' fails to compile for two reasons:
29325 1) The header watchdog.h cannot be found.
29326 2) The header zlib.h is picked up from the tool chain rather than the
29327 project causing a prototype conflict for crc32.
29329 This patch addresses both of these issues.
29331 Platforms Tested On:
29334 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
29336 commit 597f6c26a18b389903a64692bacbf9a1ca69355b
29337 Author: James Yang <James.Yang@freescale.com>
29338 Date: Mon May 5 10:22:53 2008 -0500
29340 Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
29342 When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
29343 work before relocating to RAM because command history is written into
29344 a global array that is not writable before relocation. This patch
29345 defers to the no-editing and no-history code in readline_into_buffer()
29346 if it is called before relocation.
29348 Signed-off-by: James Yang <James.Yang@freescale.com>
29349 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29351 commit 726c0f1e5f108dccea052965123b95837d2bd402
29352 Author: Detlev Zundel <dzu@denx.de>
29353 Date: Mon May 5 16:11:22 2008 +0200
29355 cosmetic: Adjust coding style for switch statements to be consistent
29357 Signed-off-by: Detlev Zundel <dzu@denx.de>
29359 commit 574b319512b13e10800f0045e39b993f4ca25e42
29360 Author: Detlev Zundel <dzu@denx.de>
29361 Date: Mon May 5 16:11:21 2008 +0200
29363 Fix disk type output in disk/part.c
29365 Signed-off-by: Detlev Zundel <dzu@denx.de>
29367 commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
29368 Author: Vlad Lungu <vlad.lungu@windriver.com>
29369 Date: Mon May 5 14:20:03 2008 +0300
29371 Mail address change, documentation modified
29373 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
29375 commit 4d49b28038e2819088e8356a77212fc95a89ce5a
29376 Author: Michal Simek <monstr@monstr.eu>
29377 Date: Sun May 4 15:42:41 2008 +0200
29379 microblaze: Repare intc handling
29381 Signed-off-by: Michal Simek <monstr@monstr.eu>
29383 commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
29384 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29385 Date: Sun May 4 15:17:52 2008 +0200
29387 include/gitignore: update to all architectures
29389 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29391 commit 1df368aed3b8bc240fe1595d290b0e91b22961da
29392 Author: Marcel Ziswiler <marcel@ziswiler.com>
29393 Date: Mon May 5 02:12:06 2008 +0200
29395 ide: Remove spurious second include of io.h
29397 Removed the second include, with all the #ifdef around as suggested by Wolfgang.
29399 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
29401 commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
29402 Author: Adrian Filipi <adrian.filipi@eurotech.com>
29403 Date: Tue May 6 16:46:37 2008 -0400
29407 This patch fixes three typos.
29408 The first is a repetition of CONFIG_CMD_BSP.
29409 The second makes the #endif comment match its #if.
29410 The third is a spelling error.
29412 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
29414 commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
29415 Author: Grant Erickson <gerickson@nuovations.com>
29416 Date: Sun May 4 16:45:01 2008 -0700
29418 Recognize 'powerpc' As an Alias for IH_ARCH_PPC
29420 Add support for the recognition of 'powerpc' as an alias for the PowerPC
29421 architecture type since Linux is already trending in that direction,
29422 preferring 'powerpc' to 'ppc'.
29424 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
29426 commit f5a24259190c388c2527bdc49fee34577d862cc7
29427 Author: Wheatley Travis <Travis.Wheatley@freescale.com>
29428 Date: Fri May 2 13:35:15 2008 -0700
29430 7450 and 86xx L2 cache invalidate bug corrections
29432 The 7610 and related parts have an L2IP bit in the L2CR that is
29433 monitored to signal when the L2 cache invalidate is complete whereas the
29434 7450 and related parts utilize L2I for this purpose. However, the
29435 current code does not account for this difference. Additionally the 86xx
29436 L2 cache invalidate code used an "andi" instruction where an "andis"
29437 instruction should have been used.
29439 This patch addresses both of these bugs.
29441 Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
29442 Acked-By: Jon Loeliger <jdl@freescale.com>
29444 commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
29445 Author: Wolfgang Denk <wd@denx.de>
29446 Date: Fri May 9 10:16:13 2008 +0200
29448 Avoid infinite loop "Generating include/autoconf.mk"
29450 Fix a bogus circular dependency that caused an infinite loop of
29451 "Generating include/autoconf.mk" again and again.
29453 Signed-off-by: Wolfgang Denk <wd@denx.de>
29455 commit 567fb852178dbf59529d7301620a3f3732a4b02d
29456 Author: Stelian Pop <stelian@popies.net>
29457 Date: Thu May 8 22:52:09 2008 +0200
29459 Fix @ -> <at> substitution
29461 When applying the AT91CAP9 patches upstream, something transformed
29462 the '@' character into the ' <at> ' sequence.
29464 The patch below restores the original form in all the places where
29465 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
29466 were copied from AT91CAP9, and a couple of other files where the
29467 ' <at> ' sequence was present).
29469 Signed-off-by: Stelian Pop <stelian@popies.net>
29470 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29472 commit 73ccb3410a0785593cda7aee455dfc51f790e281
29473 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
29474 Date: Mon Apr 28 14:04:32 2008 +0200
29476 ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
29478 Signed-off-by: Gary Jennejohn <garyj@denx.de>
29479 Signed-off-by: Stefan Roese <sr@denx.de>
29481 commit ef2642625cbfb1c3695e3478d08ae515052a4950
29482 Author: Stefan Roese <sr@denx.de>
29483 Date: Thu May 8 11:10:46 2008 +0200
29485 ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
29487 Signed-off-by: Stefan Roese <sr@denx.de>
29489 commit a00eccfebc954ad9485161efeca7d9aaf626d530
29490 Author: Stefan Roese <sr@denx.de>
29491 Date: Thu May 8 11:05:15 2008 +0200
29493 ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
29495 This patch adds fdt (flattened device tree) support to all remaining AMCC
29496 eval boards. Most newer boards already support device tree. With this patch,
29497 all AMCC boards now enable device tree passing from U-Boot to Linux
29498 arch/powerpc kernels.
29500 Signed-off-by: Stefan Roese <sr@denx.de>
29502 commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
29503 Author: Stefan Roese <sr@denx.de>
29504 Date: Thu May 8 11:01:09 2008 +0200
29506 ppc4xx: Add weak default ft_board_setup() routine
29508 This patch adds a default ft_board_setup() routine to the 4xx fdt code.
29509 This routine is defined as weak and can be overwritten by a board specific
29512 Signed-off-by: Stefan Roese <sr@denx.de>
29514 commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
29515 Author: Stefan Roese <sr@denx.de>
29516 Date: Thu May 8 10:48:58 2008 +0200
29518 ppc4xx: acadia: Add fdt support and fix section overlap problem
29520 This patch adds fdt (flattened device tree) support to the AMCC
29521 Acadia eval board. This increases the image size and it doesn't
29522 fit anymore into 256kByte. Since we didn't want to remove features
29523 from the configuration, we decided to increase the U-Boot image size
29524 (add one flash sector).
29526 Also changed the default environment definition to make it
29527 independent of such changes.
29529 Signed-off-by: Stefan Roese <sr@denx.de>
29531 commit 4adb3023de75bc150f088c8935db340930ad38c8
29532 Author: Ira Snyder <iws@ovro.caltech.edu>
29533 Date: Tue Apr 29 11:18:54 2008 -0700
29535 ppc4xx: Add device tree support to AMCC Yosemite
29537 Add support for booting with a device tree blob. This is needed to boot
29538 ARCH=powerpc kernels. Also add support for setting the eth0 mac address
29539 via the ethaddr variable.
29541 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
29542 Signed-off-by: Stefan Roese <sr@denx.de>
29544 commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
29545 Author: Dave Mitchell <dmitchell@amcc.com>
29546 Date: Wed May 7 09:00:23 2008 -0700
29548 ppc4xx: Fix typos in 460GT/EX FBDV array
29550 Corrected two typos in the 460GT/EX FBDV array.
29552 Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
29553 Signed-off-by: Stefan Roese <sr@denx.de>
29555 commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
29556 Author: Andy Fleming <afleming@freescale.com>
29557 Date: Wed May 7 16:54:31 2008 -0500
29559 85xx: Limit CPU2 workaround to parts that have the errata
29561 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
29562 Signed-off-by: Andy Fleming <afleming@freescale.com>
29564 commit a5fe514e8ace564300d2c1d73846ddff49654243
29565 Author: Lee Nipper <lee.nipper@freescale.com>
29566 Date: Fri Apr 25 15:44:45 2008 -0500
29568 mpc83xx: system performance settings for MPC8349EMDS.
29570 These same settings are used on MPC8349ITX, and
29571 improve performance on MPC8349EMDS.
29573 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
29574 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
29576 commit 49387dba910e485640b575e920ee463b7e611dc3
29577 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
29578 Date: Tue May 6 13:22:52 2008 +0900
29580 [MIPS] cpu/mips/cache.S: Fix build warning
29582 Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
29583 warns illegal global symbol references by bal (and jal also) instruction.
29584 This does not happen with the latest binutils v2.18.
29586 Here's an example on gth2_config:
29588 mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
29589 stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
29590 c -EB -c -o cache.o cache.S
29591 cache.S: Assembler messages:
29592 cache.S:243: Warning: Pretending global symbol used as branch target is local.
29593 cache.S:250: Warning: Pretending global symbol used as branch target is local.
29595 In principle, gas might be sensitive to global symbol references in PIC
29596 code because they should be processed through GOT (global offset table).
29597 But if `bal' instruction is used, it results in PC-based offset jump.
29598 This is the cause of this warning.
29600 In practice, we know it doesn't matter whether PC-based reference or GOT-
29601 based. As for this case, both will work before/after relocation. But let's
29604 This patch explicitly sets up a target address, then jump there.
29605 Here's an example of disassembled code with/without this patch.
29607 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
29608 9000066c: ac80fffc sw zero,-4(a0)
29609 90000670: 01402821 move a1,t2
29610 -90000674: 0411ffba bal 90000560 <mips_init_icache>
29611 -90000678: 01803021 move a2,t4
29612 -9000067c: 01602821 move a1,t3
29613 -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
29614 -90000684: 01a03021 move a2,t5
29615 -90000688: 03000008 jr t8
29616 -9000068c: 00000000 nop
29617 +90000674: 01803021 move a2,t4
29618 +90000678: 8f8f83ec lw t7,-31764(gp)
29619 +9000067c: 01e0f809 jalr t7
29620 +90000680: 00000000 nop
29621 +90000684: 01602821 move a1,t3
29622 +90000688: 01a03021 move a2,t5
29623 +9000068c: 8f8f81e0 lw t7,-32288(gp)
29624 +90000690: 01e0f809 jalr t7
29625 +90000694: 00000000 nop
29626 +90000698: 03000008 jr t8
29627 +9000069c: 00000000 nop
29629 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
29631 commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
29632 Author: Vlad Lungu <vlad.lungu@windriver.com>
29633 Date: Mon May 5 14:04:00 2008 +0300
29635 Allow building mips versions with ELDK 3.1.1
29637 .gpword works only with local symbols on certain binutils versions
29639 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
29641 commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
29642 Author: Wolfgang Denk <wd@denx.de>
29643 Date: Mon May 5 12:52:36 2008 +0200
29645 MAKEALL: add inka4x0 board
29647 Signed-off-by: Wolfgang Denk <wd@denx.de>
29649 commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
29650 Author: Wolfgang Denk <wd@denx.de>
29651 Date: Sun May 4 21:34:23 2008 +0200
29653 kb9202 board: fix build problem.
29655 Signed-off-by: Wolfgang Denk <wd@denx.de>
29657 commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
29658 Author: Wolfgang Denk <wd@denx.de>
29659 Date: Sun May 4 12:10:33 2008 +0200
29661 Prepare for v1.3.3-rc3
29663 Update ChNAGELOG, minor white space cleanup.
29665 Signed-off-by: Wolfgang Denk <wd@denx.de>
29667 commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
29668 Author: Wolfgang Denk <wd@denx.de>
29669 Date: Sun May 4 00:35:15 2008 +0200
29671 drivers/net/tsec.c: Fix typo.
29673 Signed-off-by: Wolfgang Denk <wd@denx.de>
29675 commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
29676 Author: Mike Frysinger <vapier@gentoo.org>
29677 Date: Fri May 2 21:45:12 2008 -0400
29679 version_autogenerated.h: use printf rather than echo -n
29681 Some systems are dumb and do not implement the -n flag to echo (like OS X).
29682 Convert the Makefile to use printf as this should work everywhere.
29684 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
29685 Signed-off-by: Wolfgang Denk <wd@denx.de>
29687 commit 4acc2a108ad0a669165924704a6cb083f9138242
29688 Author: Mike Frysinger <vapier@gentoo.org>
29689 Date: Fri May 2 18:17:50 2008 -0400
29691 fix building when saveenv is disabled in some setups
29693 If you enable environment in the flash, but disable the embedded
29694 option, and you disable the saveenv command, then the #if nested
29695 logic will trigger a compile failure:
29696 env_flash.c: In function 'env_relocate_spec':
29697 env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
29698 The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
29700 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
29702 commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
29703 Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
29704 Date: Fri May 2 16:10:04 2008 -0400
29706 SBC8548: fix address mask to allow 64M flash
29708 Fix incorrect mask to enable all 64MB of onboard flash.
29709 Previously U-Boot incorrectly mapped only 8MB of flash, this
29710 patch correctly maps all the available flash.
29712 Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
29714 commit 3648085c464c8c22ef76fab006ca4344d3796124
29715 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29716 Date: Fri May 2 19:48:56 2008 +0200
29718 qemu_mips: add README
29720 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29722 commit 6fdd002689190a0022c7b3dbab37fcba724580ce
29723 Author: Marcel Ziswiler <marcel@ziswiler.com>
29724 Date: Fri May 2 02:35:59 2008 +0200
29726 Fix misspelled comment
29728 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
29730 commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
29731 Author: Mike Frysinger <vapier@gentoo.org>
29732 Date: Thu May 1 04:13:05 2008 -0400
29734 mkimage: make mmap() checks consistent
29736 The mmap() related code is full of inconsistent casts/constants when
29737 it comes to error checking, and may break when building on some
29738 systems (like ones that do not implicitly define the caddr_t type).
29739 Let's just avoid the whole mess by writing the code nice and clean in
29742 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
29744 commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
29745 Author: Marcel Ziswiler <marcel@ziswiler.com>
29746 Date: Thu May 1 09:05:34 2008 +0200
29748 Fix defined but not used build warning
29750 - warning: 'srom' defined but not used
29752 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
29754 commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
29755 Author: Marcel Ziswiler <marcel@ziswiler.com>
29756 Date: Thu May 1 09:05:26 2008 +0200
29758 Fix implicit declaration build warnings
29760 - warning: implicit declaration of function ‘serial_initialize’
29762 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
29764 commit 9acde129cc3f9c1b3bc11a821480dd446774d618
29765 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
29766 Date: Tue Apr 29 19:18:32 2008 +0200
29768 TSEC: add config options for VSC8601 RGMII PHY
29770 The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
29771 and Tx clock lines. They are configured using 2 bits in extended
29773 Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
29774 been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
29776 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
29777 Acked-by: Andy Fleming <afleming@freescale.com>
29778 Acked-by: Ben Warren <biggerbadderben@gmail.com>
29781 drivers/net/tsec.c | 6 ++++++
29782 drivers/net/tsec.h | 3 +++
29783 2 files changed, 9 insertions(+), 0 deletions(-)
29785 commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
29786 Author: Wolfgang Denk <wd@denx.de>
29787 Date: Sat May 3 23:07:15 2008 +0200
29789 Revert "ColdFire: Get information from the correct GCC"
29791 This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
29792 (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
29794 commit c4e5f52a58d278eebb87f476e353972c5dacea40
29795 Author: Wolfgang Denk <wd@denx.de>
29796 Date: Sat May 3 22:25:00 2008 +0200
29798 config.mk: use correct (cross) compiler
29800 Some config.mk files reference $(CC) to test for specific tool chain
29801 features, so make sure $(CC) gets set before including any such
29804 This patch replaces commit b7166e05a5 ("ColdFire: Get information from
29807 Signed-off-by: Wolfgang Denk <wd@denx.de>
29809 commit 27c38689d0cfde0e444239345f97b5eecc9f4067
29810 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29811 Date: Thu May 1 02:13:44 2008 +0200
29813 pxa: fix previous definition on cpu init
29815 start.S:183:1: warning: "ICMR" redefined
29816 In file included from start.S:33:
29817 include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
29818 start.S:187:1: warning: "RCSR" redefined
29821 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29823 commit 6d12e697de794d700767f22f950e3026ccf4daf6
29824 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29825 Date: Thu May 1 02:13:43 2008 +0200
29827 pxa: fix pcmcia operation on 'i' may be undefined
29829 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29830 Signed-off-by: Wolfgang Denk <wd@denx.de>
29832 commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
29833 Author: Kumar Gala <galak@kernel.crashing.org>
29834 Date: Wed Apr 30 16:24:35 2008 -0500
29836 MPC8610HPCD: Drop -O2 from the build flags
29838 Make the flags use -Os like all other boards
29840 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
29842 commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
29843 Author: Stefan Roese <sr@denx.de>
29844 Date: Wed Apr 30 15:50:39 2008 +0200
29846 RTC: Fix month offset by one problem in M41T62 RTC driver
29848 This patch fixes a problem with the month being read and written
29849 incorrectly (offset by one). This only gets visible by also using
29850 the Linux driver (rtc-m41t80).
29852 Tested on AMCC Canyonlands.
29854 Signed-off-by: Stefan Roese <sr@denx.de>
29856 commit 141ba1cad8e6598a2466e7e2976c6a12285df619
29857 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
29858 Date: Sat May 3 13:51:44 2008 +0900
29860 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
29862 Current trick to pick up GNU assembler minor version uses a dot(.) as a
29863 delimiter, and take the second field to obtain minor version number. But
29864 as can be expected, this doesn't work with a version string which has
29865 dots more than needs.
29869 $ mips-linux-gnu-as --version | grep 'GNU assembler'
29870 GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
29871 $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
29875 This patch restricts the version format to 2.XX.XX... This will work
29878 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
29880 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
29884 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
29886 commit ea638951acead7f1086c908c0b9f086beab82a22
29887 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
29888 Date: Sat May 3 13:51:28 2008 +0900
29890 [MIPS] cpu/mips/cache.S: Add dcache_enable
29892 Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
29893 "allow ports to override bootelf behavior") requires ports to have this
29896 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
29897 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29899 commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
29900 Author: Wolfgang Denk <wd@denx.de>
29901 Date: Thu May 1 21:30:16 2008 +0200
29903 onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
29905 Onenand needs a version of memcpy() which performs 16 bit accesses
29906 only; make sure the name does not conflict with the standard
29909 Signed-off-by: Wolfgang Denk <wd@denx.de>
29911 commit 12bc4e94251c369c529ffa505cf58b148c372f7f
29912 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29913 Date: Wed Apr 30 22:38:17 2008 +0200
29915 cmd_nand: fix warning: str2long ncompatible pointer type
29917 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29919 commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
29920 Author: Timur Tabi <timur@freescale.com>
29921 Date: Fri Apr 4 11:16:11 2008 -0500
29923 Fix calculation of I2C clock for some 86xx chips
29925 Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
29926 There is no pattern that can be used to determine which chips use which
29927 frequency, so the only way to determine is to look up the actual SOC
29928 designation and use the right value for that SOC.
29930 Signed-off-by: Timur Tabi <timur@freescale.com>
29932 commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
29933 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
29934 Date: Wed Apr 30 12:11:19 2008 -0500
29936 ColdFire: Fix ethernet hang issue for mcf547x_8x
29938 The ethernet hang is caused by receiving buffer in DRAM is not
29939 yet ready due to access cycles require longer time in DRAM.
29940 Relocate DMA buffer descriptors from DRAM to internal SRAM.
29942 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
29944 commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
29945 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
29946 Date: Wed Apr 30 12:10:47 2008 -0500
29948 ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
29950 Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
29951 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
29953 commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
29954 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
29955 Date: Wed Apr 30 12:10:23 2008 -0500
29957 ColdFire: Get information from the correct GCC
29959 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
29960 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
29962 commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
29963 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
29964 Date: Wed Apr 30 18:02:59 2008 +0200
29966 Fix warning in env_nand.c if compiled for DaVinci Schmoogie
29970 nv_nand.c: In function 'saveenv':
29971 env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
29972 env_nand.c: In function 'env_relocate_spec':
29973 env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
29975 if compiled for davinci_schmoogie_config.
29977 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
29978 Ack by: Sergey Kubushyn <ksi@koi8.net>
29980 commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
29981 Author: Anatolij Gustschin <agust@denx.de>
29982 Date: Wed Apr 30 13:34:40 2008 +0200
29984 Fix warnings while compiling net/net.c for MPC8610HPCD board
29986 MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
29987 causing overriding default -Os option. New gcc (ver. 4.2.2)
29988 produces warnings while compiling net/net.c file with -O2
29989 option. The patch is an attempt to fix this.
29991 Signed-off-by: Anatolij Gustschin <agust@denx.de>
29993 commit 58b575e575c25fdf8c88141e145db201f3092149
29994 Author: Sascha Laue <Sascha.Laue@gmx.biz>
29995 Date: Wed Apr 30 15:23:38 2008 +0200
29997 lwmon5: fix offset error in sysmon0 POST
29999 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
30000 Signed-off-by: Wolfgang Denk <wd@denx.de>
30002 commit e7419b243a373de4ee042f7d4f45f66de787240d
30003 Author: Sascha Laue <Sascha.Laue@gmx.biz>
30004 Date: Wed Apr 30 15:16:35 2008 +0200
30006 lwmon5: fix manual merge error in POST
30008 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
30010 commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
30011 Author: Wolfgang Denk <wd@denx.de>
30012 Date: Wed Apr 30 17:46:26 2008 +0200
30014 cmd_nand.c: fix another 'incompatible pointer type' warning.
30016 Signed-off-by: Wolfgang Denk <wd@denx.de>
30018 commit de109d909707e2dfe806be5efc3cdb103b47c8ad
30019 Author: Wolfgang Denk <wd@denx.de>
30020 Date: Wed Apr 30 17:25:07 2008 +0200
30022 Makefile: fix parallel builds
30024 This problem shows up with parallel builds only; it results in
30025 somewhat cryptic error messages like
30027 $ JOBS=-j6 MAKEALL netstar
30028 Configuring for netstar board...
30029 arm-linux-ld: cannot find -lgeneric
30030 make[1]: *** [eeprom.srec] Error 1
30032 A few boards (like netstar and voiceblue) need some libraries for
30033 building; however, the board Makefile does not contain any such
30034 dependencies which may cause problems with parallel builds. Adding
30035 such dependencies is difficult as we would also have to provide build
30036 rules, which already exist in the respective library Makefiles.
30038 To solve this, we make sure that all libraries get built before the
30041 Signed-off-by: Wolfgang Denk <wd@denx.de>
30043 commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
30044 Author: Stefan Roese <sr@denx.de>
30045 Date: Wed Apr 30 14:51:36 2008 +0200
30047 ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
30049 This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
30050 used for NAND booting to match the values needed for the new 512MB
30051 DIMM modules shipped with the productions boards:
30053 Crucial: CT6464AC667.8FB
30055 Signed-off-by: Stefan Roese <sr@denx.de>
30057 commit ea9202a659dc75996facf1475f1866a19a9d3129
30058 Author: Stefan Roese <sr@denx.de>
30059 Date: Wed Apr 30 10:49:43 2008 +0200
30061 ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
30063 This patch fixes a problem with DIMMs that have 8 banks. Now the
30064 MCIF0_MBxCF register will be setup correctly for this setup too.
30066 This was noticed with the 512MB DIMM on Canyonlands/Glacier.
30068 Signed-off-by: Stefan Roese <sr@denx.de>
30070 commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
30071 Author: Wolfgang Denk <wd@denx.de>
30072 Date: Tue Apr 29 23:41:06 2008 +0200
30074 Prepare v1.3.3-rc2, again.
30076 Signed-off-by: Wolfgang Denk <wd@denx.de>
30078 commit b7fcc4c13993782342cf5cd20d237a6281648a0b
30079 Author: Wolfgang Denk <wd@denx.de>
30080 Date: Tue Apr 29 23:35:24 2008 +0200
30084 Signed-off-by: Wolfgang Denk <wd@denx.de>
30086 commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
30087 Author: Wolfgang Denk <wd@denx.de>
30088 Date: Tue Apr 29 23:32:20 2008 +0200
30090 common/env_nand.c: fix one more incompatible pointer type issue
30092 Signed-off-by: Wolfgang Denk <wd@denx.de>
30094 commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
30095 Author: Wolfgang Denk <wd@denx.de>
30096 Date: Tue Apr 29 21:33:08 2008 +0200
30098 post/board/lwmon5/sysmon.c: fix manual merge error.
30100 Signed-off-by: Wolfgang Denk <wd@denx.de>
30102 commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
30103 Author: Kumar Gala <galak@kernel.crashing.org>
30104 Date: Tue Apr 29 12:54:59 2008 -0500
30106 85xx: Add -mno-spe to e500/85xx builds
30108 Newer gcc's might be configured to enable autovectorization by default.
30109 If we happen to build with one of those compilers we will get SPE
30110 instructions in random code.
30112 -mno-spe disables the compiler for automatically generating SPE
30113 instructions without our knowledge.
30115 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30117 commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
30118 Author: Kumar Gala <galak@kernel.crashing.org>
30119 Date: Tue Apr 29 10:18:34 2008 -0500
30121 Update .gitignore for zlib.h
30123 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30125 commit 45239cf4152109caa925145ccd433529902df887
30126 Author: Kumar Gala <galak@kernel.crashing.org>
30127 Date: Tue Apr 29 10:27:08 2008 -0500
30129 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
30131 All the 85xx and 86xx UM describe the register as timing_cfg_3
30134 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30136 commit ef7d30b14394e4c4a153118f5845760cadada02a
30137 Author: Kumar Gala <galak@kernel.crashing.org>
30138 Date: Tue Apr 29 10:28:34 2008 -0500
30140 85xx/86xx: Rename DDR init address and init extended address register
30142 Rename init_addr and init_ext_addr to match the docs between
30143 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
30145 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30147 commit cf6cc014270549684873a5972d2595052c468cb6
30148 Author: Kumar Gala <galak@kernel.crashing.org>
30149 Date: Mon Apr 28 02:24:04 2008 -0500
30151 85xx: Additional fixes and cleanup of MP code
30153 * adjust __spin_table alignment to match ePAPR v0.94 spec
30154 * loop over all cpus when determing who is up. This fixes an issue if
30155 the "boot cpu" isn't core0. The "boot cpu" will already be in the
30156 cpu_up_mask so there is no harm
30157 * Added some protection in the code to ensure proper behavior. These
30158 changes are explicitly needed but don't hurt:
30159 - Added eieio to ensure the "hot word" of the table is written after
30160 all other table updates have occurred.
30161 - Added isync to ensure we don't prefetch loading of table entries
30162 until we a released
30164 These issues we raised by Dave Liu.
30166 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30168 commit b2d527a8b9fb50afccbaf79b5540952585cdc760
30169 Author: Yuri Tikhonov <yur@emcraft.com>
30170 Date: Tue Apr 29 15:06:41 2008 +0200
30172 lwmon5: minor clean-up to include/configs/lwmon5.h
30174 LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
30175 the CFG_DSPIC_TEST_ADDR definition more readable.
30177 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30179 commit f4c4d21a885ccc222fd0acdf653b683249e85117
30180 Author: Stefan Roese <sr@denx.de>
30181 Date: Tue Apr 29 16:08:05 2008 +0200
30183 ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
30185 Signed-off-by: Stefan Roese <sr@denx.de>
30187 commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
30188 Author: Yuri Tikhonov <yur@emcraft.com>
30189 Date: Tue Apr 29 13:32:45 2008 +0200
30191 ppc flush_cache: add watch-dog triggering into the loops.
30193 Some boards (e.g. lwmon5) need rather a frequent watch-dog
30194 kicking. Since the time it takes for the flush_cache() function
30195 to complete its job depends on the size of data being flushed, one
30196 may encounter watch-dog resets on such boards when, for example,
30197 download big files over ethernet.
30199 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30201 commit cab99d6f3281ab6784feccf98b9b425daa58418a
30202 Author: Stefan Roese <sr@denx.de>
30203 Date: Tue Apr 29 14:44:54 2008 +0200
30205 ppc4xx: Fix compilation warning in denali_spd_ddr2.c
30207 Signed-off-by: Stefan Roese <sr@denx.de>
30209 commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
30210 Author: Stefan Roese <sr@denx.de>
30211 Date: Tue Apr 29 14:12:07 2008 +0200
30213 ppc4xx: Fix Katmai CFG_MONITOR_LEN
30215 Signed-off-by: Stefan Roese <sr@denx.de>
30217 commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
30218 Author: Stefan Roese <sr@denx.de>
30219 Date: Tue Apr 29 13:57:07 2008 +0200
30221 ppc4xx: Complete remove bogus dflush()
30223 Since the current dflush() implementation is know to have some problems
30224 (as seem on lwmon5 ECC init) this patch removes it completely and replaces
30225 it by using clean_dcache_range().
30227 Tested on Katmai with ECC DIMM.
30229 Signed-off-by: Stefan Roese <sr@denx.de>
30231 commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
30232 Author: Stefan Roese <sr@denx.de>
30233 Date: Tue Apr 29 13:36:51 2008 +0200
30235 ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
30237 As it seems the "old" ECC initialization routine by using dflush() didn't
30238 write all lines in the dcache back to memory on lwmon5. This could lead
30239 to ECC error upon Linux booting. This patch changes the program_ecc()
30240 routine to now use clean_dcache_range() instead of dflush().
30241 clean_dcache_range() uses dcbst which is exactly what we want in this
30244 Since dflush() is known is cause problems, this routine will be
30245 removed completely and replaced by clean_dcache_range() with an
30248 Signed-off-by: Stefan Roese <sr@denx.de>
30250 commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
30251 Author: Yuri Tikhonov <yur@emcraft.com>
30252 Date: Mon Apr 28 18:19:34 2008 +0200
30254 POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
30256 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30258 commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
30259 Author: Markus Brunner <super.firetwister@googlemail.com>
30260 Date: Mon Apr 28 08:47:47 2008 +0200
30262 ppc4xx: Fixup ebc clock in FDT for 405GP/EP
30264 On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
30265 and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
30268 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
30270 commit 2ef7503a593c77a80c2a054011970227c4b62774
30271 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30272 Date: Thu Apr 24 07:57:17 2008 +0200
30274 NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
30276 Move non-inlied functions into specific drivers file
30277 Set get_prom as weak
30279 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30280 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
30281 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
30283 commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
30284 Author: Guennadi Liakhovetski <lg@denx.de>
30285 Date: Thu Apr 3 17:04:19 2008 +0200
30287 net: make ARP timeout configurable
30289 Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
30290 On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
30291 to the boards get lost, which typically are ARP replies. By configuring
30292 the timeout to a lower value we significantly improve the first network
30293 transfer time on this board. The timeout is specified in milliseconds,
30294 later internally it is converted to deciseconds, because it has to be
30295 converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
30298 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
30299 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
30301 commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
30302 Author: Guennadi Liakhovetski <lg@denx.de>
30303 Date: Thu Apr 3 13:36:18 2008 +0200
30305 minor cs8900 driver clean up
30307 Remove a redundant register definition, clean up some coding style
30310 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
30311 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
30313 commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
30314 Author: Wolfgang Denk <wd@denx.de>
30315 Date: Mon Apr 28 22:01:04 2008 +0200
30317 jffs2_1pass.c: fix incompatible pointer type warning
30319 Signed-off-by: Wolfgang Denk <wd@denx.de>
30321 commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
30322 Author: Sascha Laue <Sascha.Laue@gmx.biz>
30323 Date: Tue Apr 1 10:10:18 2008 +0200
30325 lwmon5: update dsPIC POST spezification
30327 The specification for the lwmon5 board dsPIC POST got changed.
30328 Also add defines for the temperatures and voltages.
30330 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
30332 commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
30333 Author: Sascha Laue <Sascha.Laue@gmx.biz>
30334 Date: Tue Apr 1 15:13:03 2008 +0200
30336 Fix watchdog POST for lwmon5
30338 If the hardware watchdog detects a voltage error, the watchdog sets
30339 GPIO62 to low. The watchdog POST has to detect this low level.
30341 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
30342 Signed-off-by: Wolfgang Denk <wd@denx.de>
30344 commit dd5748bcd669f46aeb6686c1b341323843738ccc
30345 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
30346 Date: Mon Apr 28 14:37:14 2008 +0200
30348 rtl8169: fix compiler warnings
30350 Fix multiple compiler warnings related to argument type mismatch.
30352 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
30354 commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
30355 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
30356 Date: Mon Apr 28 14:36:06 2008 +0200
30358 IDE: fix compiler warnings
30360 The IDE driver can use 32-bit addresses in LBA mode, in which case it
30361 spits multiple warnings during compilation. Fix them.
30363 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
30365 commit db9084de28c46ac81c8f681722cb0d7411be4d7f
30366 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
30367 Date: Mon Apr 28 14:35:57 2008 +0200
30369 LinkStation: fix compiler warning, add a maintainer
30371 out_8 wants a pointer to an unsigned as the first argument. Add a
30372 maintainer for Linkstation boards.
30374 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
30376 commit c71abba3cb67b063f789f17abf6c7447727c0cd5
30377 Author: Wolfgang Denk <wd@denx.de>
30378 Date: Mon Apr 28 14:55:12 2008 +0200
30380 cmd_nand.c: fix "differ in signedness" problem
30382 Signed-off-by: Wolfgang Denk <wd@denx.de>
30384 commit f2c288a35341ad02ac03b1563d786763c9c8f159
30385 Author: Wolfgang Denk <wd@denx.de>
30386 Date: Mon Apr 28 12:48:47 2008 +0200
30388 pcnet.c: fix a merge issue
30390 Signed-off-by: Wolfgang Denk <wd@denx.de>
30392 commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
30393 Author: Wolfgang Denk <wd@denx.de>
30394 Date: Mon Apr 28 12:08:18 2008 +0200
30396 NAND: fix some strict-aliasing compiler warnings
30398 Signed-off-by: Wolfgang Denk <wd@denx.de>
30400 commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
30401 Author: Stefan Roese <sr@denx.de>
30402 Date: Mon Apr 28 11:37:14 2008 +0200
30404 ppc4xx: Fix compile warning of hcu4 board
30406 Signed-off-by: Stefan Roese <sr@denx.de>
30408 commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
30409 Author: Wolfgang Denk <wd@denx.de>
30410 Date: Mon Apr 28 11:31:23 2008 +0200
30412 MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
30414 Signed-off-by: Wolfgang Denk <wd@denx.de>
30416 commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
30417 Author: Guennadi Liakhovetski <lg@denx.de>
30418 Date: Mon Apr 28 00:25:32 2008 +0200
30420 mx31ads: fix loadaddr environment variable define
30422 Arithmetic expressions do not get evaluated under stringification. Remove
30423 default network configuration, add DHCP command support. Thanks to Felix
30424 Radensky for reporting.
30426 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
30428 commit 144eec777ac07bcb12bd38245a5a289f694a7f98
30429 Author: Wolfgang Denk <wd@denx.de>
30430 Date: Mon Apr 28 10:55:24 2008 +0200
30432 katmai: fix section overlap problem
30434 Since we didn't want to remove features from the configuration, we
30435 decided to increase the U-Boot image size (add one flash sector).
30437 Also changed the default environment definition to make it
30438 independent of such changes.
30440 Signed-off-by: Wolfgang Denk <wd@denx.de>
30441 Acked-by: Stefan Roese <sr@denx.de>
30443 commit 941d696d25624e3cc65ebf924199541acf52d74e
30444 Author: Wolfgang Denk <wd@denx.de>
30445 Date: Mon Apr 28 10:55:24 2008 +0200
30447 katmai: fix section overlap problem
30449 Since we didn't want to remove features from the configuration, we
30450 decided to increase the U-Boot image size (add one flash sector).
30452 Also changed the default environment definition to make it
30453 independent of such changes.
30455 Signed-off-by: Wolfgang Denk <wd@denx.de>
30456 Acked-by: Stefan Roese <sr@denx.de>
30458 commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
30459 Author: Kumar Gala <galak@kernel.crashing.org>
30460 Date: Sat Apr 26 11:44:44 2008 -0500
30462 post: Fix building with O=
30464 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30466 commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
30467 Author: Wolfgang Denk <wd@denx.de>
30468 Date: Sat Apr 26 01:55:00 2008 +0200
30472 Signed-off-by: Wolfgang Denk <wd@denx.de>
30474 commit 19cf2ec90d8ce52da60c1693693c4048cb810967
30475 Author: Wolfgang Denk <wd@denx.de>
30476 Date: Sat Apr 26 01:25:39 2008 +0200
30478 post/Makefile: make sure to use the correct flags
30480 ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
30481 messages to be printed.
30483 Signed-off-by: Wolfgang Denk <wd@denx.de>
30485 commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
30486 Author: Wolfgang Denk <wd@denx.de>
30487 Date: Sat Apr 26 00:34:42 2008 +0200
30489 Coding Style cleanup, update CHANGELOG
30491 Signed-off-by: Wolfgang Denk <wd@denx.de>
30493 commit f9204e15173834ff8d123e36279ce49c3c6c74fc
30494 Author: Magnus Lilja <lilja.magnus@gmail.com>
30495 Date: Sun Apr 20 10:38:12 2008 +0200
30497 i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
30499 This patch enables SPI and MC13783/RTC support for the Litekit board.
30501 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
30503 commit f97abbfb47d9e407354e157cae3f6369e460cd37
30504 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
30505 Date: Fri Apr 25 01:08:32 2008 -0500
30507 MPC8544DS: decode pcie3 end-point configuration correctly.
30509 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30510 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30512 commit 292188e15523c165c4269403fdcd33c26d89176e
30513 Author: Roy Zang <tie-fei.zang@freescale.com>
30514 Date: Fri Apr 25 00:55:09 2008 -0500
30516 MPC8544DS: Removes the unknown flash message information
30518 This patch removes the unknown flash message information:
30519 '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
30520 This unknown flash message is caused by PromJet.
30521 Some of the board user is unhappy with this information.
30523 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
30524 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30526 commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
30527 Author: Kim Phillips <kim.phillips@freescale.com>
30528 Date: Thu Apr 24 14:07:38 2008 -0500
30530 mpc83xx: bump loadaddr over fdtaddr to 0x500000
30532 this seems as a good compromise between human memory, typing,
30533 and last but not least, to accommodate for current and future kernel bloat.
30535 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30536 Acked-by: Dave Liu <daveliu@freescale.com>
30538 commit be5a7190265a34d968578ff266549c60f6f57654
30539 Author: Dave Liu <r63238@freescale.com>
30540 Date: Tue Apr 15 13:12:23 2008 +0800
30542 mpc83xx: clean up the readme for 83xx boards
30544 1. correct the typo
30545 2. correct the memory map for 837xerdb board
30547 Signed-off-by: Dave Liu <daveliu@freescale.com>
30549 commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
30550 Author: Dave Liu <r63238@freescale.com>
30551 Date: Tue Apr 15 13:11:11 2008 +0800
30553 mpc83xx: remove the unused CPM's stuff
30555 The MPC83xx family never have CPM block, so remove it from 83xx.
30557 Signed-off-by: Dave Liu <daveliu@freescale.com>
30559 commit c63ad6325a8ac0097a54b418a3288926b0484b18
30560 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30561 Date: Fri Apr 18 16:29:40 2008 +0200
30563 cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
30565 This patch adds a configurable flash auto protection list that can be used
30566 to make U-Boot protect flash regions in flash_init().
30568 The idea has been discussed on the u-boot mailing list starting
30571 Even this patch brings a new feature it is used as a bugfix for 4xx
30572 platforms where flash_init() does not completely protect the
30573 monitor's flash range in all situations.
30575 U-Boot protects the flash range from CFG_MONITOR_BASE to
30576 (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
30577 include the reset vector at 0xfffffffc.
30580 #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
30582 This config option will auto protect the last 512k of flash that
30583 contains the bootloader on board like APC405 and PMC405.
30585 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30587 commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
30588 Author: Stefan Roese <sr@denx.de>
30589 Date: Fri Apr 25 13:59:03 2008 +0200
30591 ppc4xx: Remove double defines in lwmon5.h
30593 introduced with latest lwmon5/POST merge
30595 Signed-off-by: Stefan Roese <sr@denx.de>
30597 commit 7590378fb9c686709492ceb142825cd058255956
30598 Author: Bartlomiej Sieka <tur@semihalf.com>
30599 Date: Fri Apr 25 13:54:02 2008 +0200
30601 Use watchdog-aware functions when calculating hashes of images - take two
30603 Some files didn't get updated properly with the "Use watchdog-aware
30604 functions when calculating hashes of images" commit, this commit
30607 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30608 Signed-off-by: Wolfgang Denk <wd@denx.de>
30610 commit 8e048c438e20ec89b49da5f085f8f756eba6e587
30611 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30612 Date: Fri Apr 25 12:01:39 2008 +0200
30614 ppc4xx: Add bootcount limit handling for APC405 boards
30616 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30618 commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
30619 Author: Bartlomiej Sieka <tur@semihalf.com>
30620 Date: Fri Apr 25 12:10:09 2008 +0200
30622 Use watchdog-aware functions when calculating hashes of images
30624 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30626 commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
30627 Author: Wolfgang Denk <wd@denx.de>
30628 Date: Fri Apr 25 12:44:08 2008 +0200
30630 USB: fix more GCC 4.2.x aliasing warnings
30632 Signed-off-by: Wolfgang Denk <wd@denx.de>
30633 Acked-by: Markus Klotzbuecher <mk@denx.de>
30635 commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
30636 Author: Wolfgang Denk <wd@denx.de>
30637 Date: Fri Apr 25 12:41:53 2008 +0200
30639 lib_generic/crc32.c: add missing #include <watchdog.h>
30641 Signed-off-by: Wolfgang Denk <wd@denx.de>
30643 commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
30644 Author: Wolfgang Denk <wd@denx.de>
30645 Date: Fri Apr 25 11:52:21 2008 +0200
30647 lib_generic/crc32.c: fix compile problem
30649 Signed-off-by: Wolfgang Denk <wd@denx.de>
30651 commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
30652 Author: Stefan Roese <sr@denx.de>
30653 Date: Tue Apr 22 12:20:32 2008 +0200
30655 ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
30657 The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
30658 environment variable will now get passed to the Linux kernel by setting
30659 the device_type property of the PCIe device tree node. For normal root-
30660 complex configuration it will keep its defaults value of "pci" and for
30661 endpoint configuration it will get changed to "pci-endpoint".
30663 Signed-off-by: Stefan Roese <sr@denx.de>
30665 commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
30666 Author: Yuri Tikhonov <yur@emcraft.com>
30667 Date: Thu Apr 24 10:30:53 2008 +0200
30669 lwmon5: watchdog POST fix
30671 Use the GPT0_MASKx registers as the temporary storage for watch-dog
30672 timer POST test instead of GPT0_COMPx. The latter
30673 (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
30675 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
30676 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30678 commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
30679 Author: Kim Phillips <kim.phillips@freescale.com>
30680 Date: Mon Apr 21 18:10:14 2008 -0500
30682 lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
30684 This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
30685 proven problematic getting right from the start at least on 83xx and
30688 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30690 commit a99715b8ebfc500f3f40e01b36b64d473938443d
30691 Author: Detlev Zundel <dzu@denx.de>
30692 Date: Fri Apr 18 14:50:01 2008 +0200
30694 Realining some header definitions.
30696 Signed-off-by: Detlev Zundel <dzu@denx.de>
30698 commit 4acbc6c7f993cae409c424615415a3e76820f13d
30699 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30700 Date: Thu Apr 24 07:57:16 2008 +0200
30702 NE2000: coding style cleanup
30704 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30706 commit b4aff1ffaf7120032c653357c007faa14f74d29d
30707 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30708 Date: Wed Apr 23 00:11:47 2008 +0900
30710 qemu-mips.h: Add CFI support
30712 CONFIG_ENV_OVERWRITE is also added.
30714 This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
30716 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30717 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30719 commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
30720 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30721 Date: Tue Apr 22 22:47:27 2008 +0900
30723 doc/README.mips: Add MIPS notes
30725 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30727 commit 215b01bba8bc662d35f72b084700b192d367dfb4
30728 Author: Bartlomiej Sieka <tur@semihalf.com>
30729 Date: Tue Apr 22 12:27:56 2008 +0200
30731 Add support for calculating hashes with watchdog triggering
30733 Implement watchodg-aware variants of hash calculation functions:
30737 The above functions calculate the hash of the input buffer in chunks,
30738 triggering the watchdog after processing each chunk. The chunk size
30739 is given as a function call parameter.
30741 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30743 commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
30744 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30745 Date: Wed Apr 23 11:02:12 2008 +0900
30747 qemu-mips: Cleanup whitespace, indentation, etc.
30749 No functional change.
30751 This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
30752 Then I re-created from scratch, and changed more lines than the original.
30754 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30755 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
30757 commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
30758 Author: Vlad Lungu <vlad@comsys.ro>
30759 Date: Wed Oct 10 23:02:09 2007 +0300
30761 Fixed pcnet io_base
30763 Bus and phys address are not always the same
30765 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
30767 commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
30768 Author: Wolfgang Denk <wd@denx.de>
30769 Date: Thu Apr 24 23:44:26 2008 +0200
30771 drivers/net/pcnet.c: Coding Style cleanup.
30773 Signed-off-by: Wolfgang Denk <wd@denx.de>
30775 commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
30776 Author: Vlad Lungu <vlad@comsys.ro>
30777 Date: Wed Oct 10 23:04:23 2007 +0300
30779 Added Am79C970A chip id to pcnet
30781 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
30783 commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
30784 Author: Magnus Lilja <lilja.magnus@gmail.com>
30785 Date: Sun Apr 20 10:35:03 2008 +0200
30787 i.MX31: Fix architecture numbers for ADS and Litekit boards
30789 Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
30791 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
30793 commit e7ae84d6c7288790e88639f57cb60daf89c11369
30794 Author: Magnus Lilja <lilja.magnus@gmail.com>
30795 Date: Sun Apr 20 10:36:36 2008 +0200
30797 i.MX31: Use symbolic names for Litekit membases.
30799 Use symbolic names instead of hard coded addresses for Litekit membases.
30801 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
30803 commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
30804 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30805 Date: Sat Apr 19 17:59:20 2008 +0200
30807 Fix show_boot_progress prototype
30809 in commit fad634071 "make show_boot_progress () weak."
30810 show_boot_progress is supposed to be declared as weak but declared as
30813 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30815 commit edbed247a14d70b94958010f736621212285de91
30816 Author: Bartlomiej Sieka <tur@semihalf.com>
30817 Date: Fri Apr 18 12:39:23 2008 +0200
30819 Memory footprint optimizations
30821 As suggested by Wolfgang Denk:
30822 - image printing functions:
30824 - remove indentation prefix from functions' signatures
30825 - merge getenv_verify and getenv_autostart into one parametrized function
30827 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30829 commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
30830 Author: Guennadi Liakhovetski <lg@denx.de>
30831 Date: Tue Apr 15 13:33:11 2008 +0200
30833 MX31ADS environment variable update, spi and rtc support
30835 Update MX31ADS default environment to better match the flash layout and
30836 the memory map, support SPI and RTC.
30838 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
30840 commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
30841 Author: Kumar Gala <galak@kernel.crashing.org>
30842 Date: Mon Apr 21 09:28:36 2008 -0500
30844 85xx: Round up frequency calculations to get reasonable output
30846 eg. because of rounding error we can get 799Mhz instead of 800Mhz.
30848 Introduced DIV_ROUND_UP and roundup taken from linux kernel.
30850 Signed-off-by: Dejan Minic <minic@freescale.com>
30851 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
30852 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30853 Acked-by: Andy Fleming <afleming@freescale.com>
30855 commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
30856 Author: Kumar Gala <galak@kernel.crashing.org>
30857 Date: Wed Apr 23 16:58:04 2008 -0500
30859 fsl_pci: Only modify registers if we have them
30861 pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
30863 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30865 commit 83fe32334337def160b302aa9d152d808bfcc68e
30866 Author: Markus Klotzbücher <mk@denx.de>
30867 Date: Wed Apr 23 10:57:33 2008 +0200
30869 USB: remove a cpu bug workaround for an unsupported architecture.
30871 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
30873 commit f957576cb53e6cfab412709cfc8db1afd39d21c3
30874 Author: Markus Klotzbücher <mk@denx.de>
30875 Date: Wed Apr 23 10:53:23 2008 +0200
30877 USB: fix those pesky aliasing warnings issued by gcc-4.2
30879 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
30880 Signed-off-by: Detlev Zundel <dzu@denx.de>
30882 commit 89cdab788f3716b335fefb60b836ebcf975aceab
30883 Author: Mike Frysinger <vapier@gentoo.org>
30884 Date: Mon Mar 31 11:02:01 2008 -0400
30886 crc32: use uint32_t rather than unsigned long
30888 The envcrc.c does sizeof(unsigned long) when calculating the crc, but
30889 this is done with the build toolchain instead of the target tool
30890 chain, so if the build is a 64bit system but the target is 32bits,
30891 the size will obviously be wrong. This converts all unsigned long
30892 stuff related to crc32 to uint32_t types. Compile tested only: output
30893 of ./tools/envcrc when run on a 32bit build system matches that of a
30894 64bit build system.
30896 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
30897 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30899 commit 80c40b765b3642ddb9f3392b7898715aab44a29c
30900 Author: Dirk Behme <dirk.behme@googlemail.com>
30901 Date: Wed Mar 26 09:53:29 2008 +0100
30903 ARM: Davinci: Fix DM644x timer overflow handling and cleanup
30905 Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
30909 - Remove *_masked() functions as noted by Wolfgang
30911 - Adapt register naming to recent TI spec (sprue26, March 2007)
30913 - Fix reset_timer() handling
30915 - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
30917 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
30919 - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
30921 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
30923 Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
30925 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
30926 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
30928 commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
30929 Author: Sergei Poselenov <sposelenov@emcraft.com>
30930 Date: Wed Apr 9 16:09:41 2008 +0200
30932 Added watchdog triggering calls in the "mtest" test function.
30934 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
30936 commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
30937 Author: Yuri Tikhonov <yur@emcraft.com>
30938 Date: Sun Apr 6 19:19:14 2008 +0200
30940 lwmon5 watchdog: limit trigger rate
30942 Limit the rate of h/w watch-dog triggering on the LWMON5 board by
30943 the CONFIG_WD_MAX_RATE value.
30945 Note that an earlier version of this patch which used microseconds
30946 instead of ticks dis not work. The problem was that we used
30947 usec2ticks() to convert microseconds into ticks. usec2ticks() uses
30948 get_tbclk(), which in turn calls get_sys_info(). It turns out that
30949 this function does a lot of prolonged operations (like divisions)
30950 which take too much time so we do not trigger the watchdog in time,
30951 and it resets the system.
30953 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30955 commit 2d2b994a30bb100774dc747ae9865b7f95285a88
30956 Author: Yuri Tikhonov <yur@emcraft.com>
30957 Date: Mon Mar 31 10:51:37 2008 +0200
30959 POST: move CONFIG_POST to Makefiles
30961 Introduce the new logical option CONFIG_HAS_POST which is set when the
30962 platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
30963 to determine should the POST libs be compiled for the selected target
30966 To avoid breaking u-boot linking process, the empty post/libpost.a file is
30967 created for platforms which do not have POSTs.
30969 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30970 Signed-off-by: Wolfgang Denk <wd@denx.de>
30972 commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
30973 Author: Yuri Tikhonov <yur@emcraft.com>
30974 Date: Mon Mar 31 10:49:34 2008 +0200
30976 POST: preparations for moving CONFIG_POST to Makefiles
30978 Remove CONFIG_POST ifdefs from the post/ source files.
30980 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
30981 Signed-off-by: Wolfgang Denk <wd@denx.de>
30983 commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
30984 Author: Stefan Roese <sr@denx.de>
30985 Date: Tue Apr 22 14:14:20 2008 +0200
30987 ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
30989 This patch fixes the Canyonlands and Glacier default environment to better
30990 fit to the arch/powerpc device-tree kernels. The variables dealing with
30991 arch/ppc booting are removed, since these boards are supported only in
30992 arch/powerpc. Glacier uses the same config file as Canyonlands.
30994 Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
30996 Signed-off-by: Stefan Roese <sr@denx.de>
30998 commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
30999 Author: Stefan Roese <sr@denx.de>
31000 Date: Tue Apr 22 14:06:42 2008 +0200
31002 ppc4xx: Small coding style cleanup for the latest esd patches
31004 Signed-off-by: Stefan Roese <sr@denx.de>
31006 commit 79941d63bc03aed8c48d7602f18217cc200ee931
31007 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31008 Date: Mon Apr 21 18:01:07 2008 +0200
31010 ppc4xx: Update CPU strapping for PMC440 boards
31012 This patch removes the temporary 'test' strapping option
31013 of the sbe command. The '667' strapping option now uses
31014 a PLB/PCI divider of 3.
31016 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31018 commit f00cf3193a6635355b121e90debb2f54e777e7da
31019 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31020 Date: Mon Apr 21 14:42:21 2008 +0200
31022 ppc4xx: Remove unused APC405 strataflash driver
31024 The APC405 board support has been migrated to use the common
31027 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31029 commit 1c686676a86473bbd92151f0544e109413f6ed06
31030 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31031 Date: Mon Apr 21 14:42:17 2008 +0200
31033 ppc4xx: Update APC405 configuration
31035 - enable esd's auto_update mechanism
31036 - support alternative flash layout on rev. 1.8 boards
31037 - update default environment
31038 - use common CFI flash driver
31039 - coding style cleanup
31041 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31043 commit 0b9872515a521bf7866dc24b85ddce708e60d702
31044 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31045 Date: Mon Apr 21 14:42:11 2008 +0200
31047 ppc4xx: Update APC405 board support
31049 - enable esd's auto_update mechanism
31050 - fix LCD support on latest hardware revision (uses other LCD controller)
31051 - support alternative flash layout on rev. 1.8 boards
31052 - coding style cleanup
31054 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31056 commit 83975d02e225e231960784972e7820a8b303756b
31057 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31058 Date: Mon Apr 21 14:42:06 2008 +0200
31060 ppc4xx: update esd's common auto_update code for 405 boards
31062 - Coding style cleanup (long lines)
31063 - improve handling of protected flash regions
31066 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31068 commit b9233fe5d59cb25d975071616bd1035d6f4c2285
31069 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31070 Date: Mon Apr 21 14:41:59 2008 +0200
31072 ppc4xx: Update esd's common LCD code for 405 boards
31074 - Coding style cleanup (long lines)
31075 - Add s1d13505 support
31076 - Make some functions return a result code instead of void
31078 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31080 commit dea68189424c3f1242427a8146a3861bf093173c
31081 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31082 Date: Mon Apr 21 11:36:55 2008 +0200
31084 ppc4xx: Update FPGA image for APC405 boards
31086 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31088 commit 2a05b152924acfcec3b037693329e517e6d3578f
31089 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31090 Date: Mon Apr 21 11:36:08 2008 +0200
31092 ppc4xx: Update bootlogo for APC405 boards
31094 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31096 commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
31097 Author: Stefan Roese <sr@denx.de>
31098 Date: Fri Apr 18 16:41:31 2008 +0200
31100 ppc4xx: Add dcache_enable() for 440
31102 dcache_enable() was missing for 440 and the patch
31103 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
31104 "] behavior uses this function.
31106 Note: Currently the cache handling functions like
31107 d/icache_disable/enable() are NOP's on 440. This may be changed in the
31110 Signed-off-by: Stefan Roese <sr@denx.de>
31112 commit a49e0d177a0749614b316ec847fb623f09c82c07
31113 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31114 Date: Mon Apr 21 11:19:04 2008 +0200
31116 video: Add missing free for logo memory
31118 This patch adds two missing free()s.
31120 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31122 commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
31123 Author: Troy Kisky <troy.kisky@boundarydevices.com>
31124 Date: Mon Sep 24 16:41:43 2007 -0700
31126 PATCH - Fix oob data copied into supplied buffer
31128 This patch correctly sets the oobavail variable
31129 and fixes a bug where the oob data was not valid when
31130 there where multiple groups in oobfree.
31132 First segment fixes a typo
31133 Second segment fixes a bug where oob data may be copied incorrectly.
31134 Third segment adds an error message when exiting due to write protect.
31135 Forth segment fixes a bug where oobavail may be set incorrectly.
31137 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
31139 commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
31140 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31141 Date: Fri Apr 18 17:24:32 2008 +0200
31143 ppc4xx: Fix sys_get_info() for 405GP(r)
31145 This patch assigns the correct EBC clock for 405GP(r) CPUs
31146 to PPC4xx_SYS_INFO structure. Without this patch U-Boot
31147 uses an uninitialized EBC clock in its startup message.
31149 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
31151 commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
31152 Author: Wolfgang Denk <wd@denx.de>
31153 Date: Sun Apr 20 15:39:38 2008 -0700
31155 Makefile: remove nand_spl/System.map when cleaning up.
31157 commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
31158 Author: Wolfgang Denk <wd@denx.de>
31159 Date: Sun Apr 20 15:35:52 2008 -0700
31161 MAKEALL: sort entries / lists.
31163 Signed-off-by: Wolfgang Denk <wd@denx.de>
31165 commit 0878af169b181868a105b5c33f3a6423e2c9fd60
31166 Author: Kumar Gala <galak@kernel.crashing.org>
31167 Date: Fri Apr 18 11:29:01 2008 -0500
31169 85xx: Fix size of cpu-release-addr property
31171 The cpu-release-addr is defined as always being a 64-bit quanity regardless
31172 if we are running on a 32-bit or 64-bit machine.
31174 commit 88353a985109562a639b2f8a0c90d77011bfe374
31175 Author: Timur Tabi <timur@freescale.com>
31176 Date: Fri Apr 4 11:15:58 2008 -0500
31178 Fix calculation of I2C clock for some 85xx chips
31180 Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
31181 some use CCB/3. There is no pattern that can be used to determine which
31182 chips use which frequency, so the only way to determine is to look up the
31183 actual SOC designation and use the right value for that SOC.
31185 Update immap_85xx.h to include the GUTS PORDEVSR2 register.
31187 Signed-off-by: Timur Tabi <timur@freescale.com>
31189 commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
31190 Author: Wolfgang Denk <wd@denx.de>
31191 Date: Fri Apr 18 11:44:27 2008 -0700
31193 Fix build breakage casued by commit c0559be371b2
31195 Change env_get_char from a global function ptr to a function.
31197 Signed-off-by: Wolfgang Denk <wd@denx.de>
31199 commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
31200 Author: Wolfgang Denk <wd@denx.de>
31201 Date: Fri Apr 18 10:53:41 2008 -0700
31203 Coding Style cleanup, update CHANGELOG.
31205 Signed-off-by: Wolfgang Denk <wd@denx.de>
31207 commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
31208 Author: Mike Frysinger <vapier@gentoo.org>
31209 Date: Tue Apr 8 14:00:57 2008 -0400
31211 Add support for u-boot in svn and localversion-* files
31213 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
31215 commit d23ff6827decf121461fbc5622612fd7effe207e
31216 Author: Guennadi Liakhovetski <lg@denx.de>
31217 Date: Thu Apr 3 17:04:22 2008 +0200
31219 MX31ADS network and flash updates
31221 This patch allows U-Boot to use buffered writes to the Spansion NOR
31222 flash installed on this board, and eliminates long delays in network
31223 transfers after the board startup.
31225 Also modify flash layout to embed main and redundant environment
31226 blocks in the U-Boot image.
31228 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31230 commit b5dc9b304d289831f291843ff88a45cbdf1a6290
31231 Author: Guennadi Liakhovetski <lg@denx.de>
31232 Date: Mon Apr 14 10:53:12 2008 +0200
31234 Support for the MX31ADS evaluation board from Freescale
31236 This patch adds support for the MX31ADS evaluation board from Freescale,
31237 initialization code is copied from RedBoot sources, also provided by
31240 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31242 commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
31243 Author: Stefan Roese <sr@denx.de>
31244 Date: Tue Apr 8 10:33:29 2008 +0200
31246 ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
31248 Signed-off-by: Stefan Roese <sr@denx.de>
31250 commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
31251 Author: Stefan Roese <sr@denx.de>
31252 Date: Tue Apr 8 10:33:28 2008 +0200
31254 ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
31256 Signed-off-by: Stefan Roese <sr@denx.de>
31258 commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
31259 Author: Stefan Roese <sr@denx.de>
31260 Date: Tue Apr 8 10:33:27 2008 +0200
31262 ppc4xx: Add Glacier NAND booting target
31264 Signed-off-by: Stefan Roese <sr@denx.de>
31266 commit 46f373838e384a4c23d13581b1dfa5acb66b5810
31267 Author: Stefan Roese <sr@denx.de>
31268 Date: Tue Apr 8 10:31:00 2008 +0200
31270 nand_spl: Update nand_spl to support 2k page size NAND devices
31272 This patch adds support for booting from 2k page sized NAND device
31273 (e.g. Micron 29F2G08AAC).
31275 Tested on AMCC Canyonlands.
31277 Signed-off-by: Stefan Roese <sr@denx.de>
31279 commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
31280 Author: Anatolij Gustschin <agust@denx.de>
31281 Date: Thu Apr 17 18:18:00 2008 +0200
31283 Fix crash on sequoia in ppc_4xx_eth_init
31285 Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
31286 with cache enabled (TLB Parity exeption). This patch
31289 Signed-off-by: Anatolij Gustschin <agust@denx.de>
31291 commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
31292 Author: Anatolij Gustschin <agust@denx.de>
31293 Date: Thu Apr 17 18:15:27 2008 +0200
31295 ppc4xx: Fix crash on sequoia with cache enabled
31297 Currently U-Boot crashes on sequoia board in CPU POST if
31298 cache is enabled (CONFIG_4xx_DCACHE defined). The cache
31299 won't be disabled by change_tlb before CPU POST because
31300 there is an insufficient adress range check since
31301 CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
31304 Signed-off-by: Anatolij Gustschin <agust@denx.de>
31306 commit 43c509254fab375c49936498da944658117ed07c
31307 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
31308 Date: Thu Apr 17 23:35:13 2008 +0900
31310 Use jr as register jump instruction
31312 Current assembler codes are inconsistent in the way of register jump
31313 instruction usage; some use jr, some use j. Of course GNU as allows both
31314 usages, but as can be expected from `Jump Register' the mnemonic `jr' is
31315 more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
31318 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
31320 commit 7ce63709828d37b08866e537339a169bd0db2bd3
31321 Author: Guennadi Liakhovetski <lg@denx.de>
31322 Date: Tue Apr 15 14:15:30 2008 +0200
31324 RTC driver for MC13783
31326 MC13783 is a multifunction IS with an SPI interface to the host. This
31327 driver handles the RTC controller in this chip.
31329 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31331 commit 38254f45b0b412332726c90d3184ad47479fcffb
31332 Author: Guennadi Liakhovetski <lg@denx.de>
31333 Date: Tue Apr 15 14:14:25 2008 +0200
31335 New i.MX31 SPI driver
31337 This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
31338 only implemented and tested on i.MX31, can with a modified register layout
31339 and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
31342 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31344 commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
31345 Author: Magnus Lilja <lilja.magnus@gmail.com>
31346 Date: Tue Apr 15 19:09:10 2008 +0200
31348 Fix name of i.MX31 boards in config file header
31350 Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
31352 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
31354 commit a49864593e083a5d0779fb9ca98e5a0f2053183d
31355 Author: Mike Frysinger <vapier@gentoo.org>
31356 Date: Sun Apr 13 19:42:19 2008 -0400
31358 allow ports to override go behavior
31360 Split the arch-specific logic out of the common go code and into a dedicated
31361 weak function called do_go_exec() that lives in cpu directories. This will
31362 need review from i386/nios people to make sure I didn't break them.
31364 commit 017e9b7925f74878d0e9475388cca9bda5ef9482
31365 Author: Mike Frysinger <vapier@gentoo.org>
31366 Date: Sun Apr 13 19:42:18 2008 -0400
31368 allow ports to override bootelf behavior
31370 Change the bootelf setup function into a dedicated weak function called
31371 do_bootelf_exec. This way ports can control the behavior however they
31372 like before/after calling the ELF entry point.
31374 commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
31375 Author: Ulf Samuelsson <ulf@atmel.com>
31376 Date: Sat Apr 12 20:56:03 2008 +0200
31378 Reorder ARM boards in Makefile
31380 Rearrange ARM boards in Makefile so that ARM926EJ-S boards
31381 are no longer under ARM92xT header.
31383 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
31384 Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31386 commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
31387 Author: Ulf Samuelsson <ulf@atmel.com>
31388 Date: Sat Apr 12 20:29:44 2008 +0200
31390 Clean up dataflash partitioning
31392 This patch removes the board dependent parts from
31393 "drivers/mtd/dataflash.c".
31394 Each board relying on this, will have the appropriate
31395 code in a new file, "partition.c" in the board directory.
31396 board Makefiles updated to use the file.
31398 The dataflash partitions are aligned on sector/page boundaries.
31400 The CONFIG_NEW_DF_PARTITION was used to create named partitions
31401 This is now the default operation, and the CONFIG variable is removed.
31403 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
31405 commit 51ecde946fec511a16346e498204ca10ad71080d
31406 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31407 Date: Sat Apr 12 14:08:45 2008 +0200
31409 gitignore: udpate stgit generated and .patch file
31411 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31413 commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
31414 Author: Wolfgang Denk <wd@denx.de>
31415 Date: Fri Apr 18 00:15:36 2008 -0700
31417 Get rid of redundant copy of renamed header file.
31419 Signed-off-by: Wolfgang Denk <wd@denx.de>
31421 commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
31422 Author: Vlad Lungu <vlad@comsys.ro>
31423 Date: Fri Apr 11 21:20:14 2008 +0300
31425 Fix dependency generation for older gcc versions
31427 With gcc 3.3.3 at least, compilation fails with
31429 Generating include/autoconf.mk
31430 gcc: compilation of header file requested
31431 make: *** [include/autoconf.mk] Error 1
31433 since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
31435 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
31437 commit cb1c4896905ab22fcd982e6a8a539f0031942e71
31438 Author: Marian Balakowicz <m8@semihalf.com>
31439 Date: Fri Apr 11 11:07:49 2008 +0200
31441 Restore the ability to continue booting after legacy image overwrite
31443 Before new uImage code was merged, bootm code allowed for the kernel image to
31444 get overwritten during decompresion. new uImage introduced a check for image
31445 overwrites and refused to boot the image that got overwritten. This patch
31446 restores the old behavior. It also adds a warning when the image overwriten is
31447 a multi-image file, because in such case accessing componentes other than the
31448 first one will fail.
31450 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31452 commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
31453 Author: Marian Balakowicz <m8@semihalf.com>
31454 Date: Fri Apr 11 11:07:43 2008 +0200
31456 ppc: Fix ftd_blob variable init when processing raw blob
31458 Set fdt_blob variable before its value is printed out.
31460 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
31462 commit 3d36be030043cd841a2551d00a395135e363a64b
31463 Author: Jason Wessel <jason.wessel@windriver.com>
31464 Date: Thu Apr 10 14:30:16 2008 -0500
31466 Remove all the search paths from the .lds files.
31468 The cross compiler is responsible for providing the correct libraries
31469 and the logic to find the linking libraries.
31471 Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
31473 commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
31474 Author: Bartlomiej Sieka <tur@semihalf.com>
31475 Date: Mon Apr 14 15:44:16 2008 +0200
31477 Boot-related documentation update
31479 - document 'bootm_low' and 'bootm_size' environment variables
31480 - update inaccurate CFG_BOOTMAPSZ entry
31482 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31484 commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
31485 Author: Guennadi Liakhovetski <lg@denx.de>
31486 Date: Wed Apr 9 17:34:08 2008 +0200
31488 Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
31490 Restore logic reverted by commit
31492 commit 80767a6cead9990d9e77e62be947843c2c72f469
31493 Author: Peter Pearse <peter.pearse@arm.com>
31494 Date: Wed Sep 5 16:04:41 2007 +0100
31496 Changed API name to coloured_led.h
31497 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
31498 Tidied other cpu/arm920t/start.S code
31500 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31502 commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
31503 Author: Mike Frysinger <vapier@gentoo.org>
31504 Date: Tue Apr 8 10:24:24 2008 -0400
31506 Remove conflicting NAND ID
31508 There are two NAND entries with ID 0xDC and this obviously causes problems.
31509 In the kernel, they punted the first entry, so we should do the same.
31511 See this upstream e-mail for more info:
31512 http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
31514 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
31515 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
31517 commit 188e94c370621708d13547d58dbc6ed3c5602aa8
31518 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31519 Date: Tue Apr 8 16:20:35 2008 +0900
31521 cpu/mips/cpu.c: Fix flush_cache bug
31523 Cache operations have to take line address (addr), not start_addr.
31524 I noticed this bug when debugging ping failure.
31526 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31528 commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
31529 Author: Martin Krause <martin.krause@tqs.de>
31530 Date: Thu Apr 3 14:29:01 2008 +0200
31532 TQM5200: fix default IDE reset level
31534 Before the first call of ide_reset(), the level of the IDE reset
31535 signal on the TQM5200 is low (reset asserted). This patch sets the
31536 default value to high (reset not asserted).
31538 Currently this patch fixes no real problem, but it is cleaner to
31539 assert the reset signal only on demand, and not permanently.
31541 Signed-off-by: Martin Krause <martin.krause@tqs.de>
31543 commit c61e033d6e8abb7b4060ee36060961e1399f6079
31544 Author: Detlev Zundel <dzu@denx.de>
31545 Date: Thu Apr 3 14:18:48 2008 +0200
31547 mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
31549 Signed-off-by: Detlev Zundel <dzu@denx.de>
31551 commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
31552 Author: Detlev Zundel <dzu@denx.de>
31553 Date: Thu Apr 3 14:18:47 2008 +0200
31555 mgcoge, mgsuv: rename 'addcon' to 'addcons'
31557 The latter name with 13 users is already established, so we will use
31560 Signed-off-by: Detlev Zundel <dzu@denx.de>
31562 commit e175eacc87c3a9e4dad0799fee0e95732520afc7
31563 Author: Martin Krause <martin.krause@tqs.de>
31564 Date: Thu Apr 3 13:37:56 2008 +0200
31566 IDE: fix bug in reset sequence
31568 According to the ata (ata5) specification the RESET- signal
31569 shall be asserted for at least 25 us. Without this patch,
31570 the RESET- signal is asserted on some boards for only < 1 us
31571 (e. g. on the TQM5200). This patch adds a general delay of
31572 25 us to the RESET- signal.
31574 Without this patch a Platinum 4 GiB CF card is not recognised
31575 properly on boards with a TQM5200 (STK52xx, TB5200).
31577 Signed-off-by: Martin Krause <martin.krause@tqs.de>
31579 commit 813bea96a960916c72b4a3a7df840151529c26ce
31580 Author: Sascha Laue <Sascha.Laue@gmx.biz>
31581 Date: Thu Apr 3 14:43:11 2008 +0200
31583 lwmon5: disable CONFIG_ZERO_BOOTDELAY
31585 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
31587 commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
31588 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31589 Date: Wed Apr 2 08:03:58 2008 +0200
31591 ds174x: Fix warning on return in rtc_get and rtc_set functions
31593 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31595 commit a253b38bf50c85227c33ca0febc870ee49d1588e
31596 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31597 Date: Wed Apr 2 08:03:57 2008 +0200
31599 cmd_log.c: Fix assignment differ in signedness
31601 In function 'logbuff_init_ptrs':
31602 cmd_log.c:79: warning: pointer targets in assignment differ in signedness
31604 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31606 commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
31607 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
31608 Date: Wed Apr 2 11:04:43 2008 +0530
31610 Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
31612 Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
31614 commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
31615 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31616 Date: Tue Apr 1 14:07:10 2008 +0200
31618 s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
31620 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
31622 commit c08fb3ea36d19b1640b7906264581e9105534399
31623 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
31624 Date: Tue Apr 15 10:24:14 2008 +0200
31626 Additional PCI IDs for IDE and network controllers
31628 These PCI IDs are required by the Linkstation platforms.
31630 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
31632 commit c0559be371b2a64b1a817088c3308688e2182f93
31633 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
31634 Date: Mon Apr 14 23:01:50 2008 +0200
31636 Change env_get_char from a global function ptr to a function.
31638 This avoids an early global data reference.
31640 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
31642 commit 3e0f331c05d72f140715c1e9fca991927e44d422
31643 Author: Guennadi Liakhovetski <lg@denx.de>
31644 Date: Tue Apr 29 12:35:08 2008 +0000
31646 Clean up smsc911x driver
31648 Replace direct register address derefencing with accessor functions.
31649 Restrict explicitly 32-bit bus-width, extend affected configurations
31652 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31653 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
31655 commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
31656 Author: Sascha Hauer <s.hauer@pengutronix.de>
31657 Date: Tue Apr 15 00:08:20 2008 -0400
31659 This patch adds a driver for the following smsc network controllers:
31667 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
31668 Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
31669 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
31671 commit 3dfd4aab929cccddb63d9ea509967861e1333b52
31672 Author: Sascha Laue <Sascha.Laue@gmx.biz>
31673 Date: Tue Apr 1 15:13:03 2008 +0200
31675 Fix watchdog POST for lwmon5
31677 If the hardware watchdog detects a voltage error, the watchdog sets
31678 GPIO62 to low. The watchdog POST has to detect this low level.
31680 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
31682 commit 24b448448a917e52806f82660a5c9d47608894fb
31683 Author: Dave Liu <r63238@freescale.com>
31684 Date: Tue Apr 1 15:22:11 2008 +0800
31686 ata: update the libata.h from ata.h of linux kernel
31688 Current libata.h of u-boot is out of sync from linux kernel,
31689 this patch make it be consistent with linux kernel.
31691 Signed-off-by: Dave Liu <daveliu@freescale.com>
31692 Signed-off-by: Tor Krill <tor@excito.com>
31694 commit f8f9dc98883f66f59eb0601da65808e6b139c87c
31695 Author: Kumar Gala <galak@kernel.crashing.org>
31696 Date: Mon Mar 31 11:59:27 2008 -0500
31698 Allow use of ARCH=powerpc when building
31700 The linux kernel is now mostly ARCH=powerpc, so to make life easier
31701 allow use to use ARCH=powerpc and convert it to ARCH=ppc.
31703 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31705 commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
31706 Author: Kyungmin Park <kmpark@infradead.org>
31707 Date: Mon Mar 31 10:40:54 2008 +0900
31709 Add apollon board MAINTAINERS entry
31711 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
31713 commit 77e475cc0ed1832160017d364be32a0be9ff02a9
31714 Author: Kyungmin Park <kmpark@infradead.org>
31715 Date: Mon Mar 31 10:40:36 2008 +0900
31719 It should access with 16-bit instead of 8-bit
31721 Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
31723 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
31725 commit a9da2b41079d230db3a5641625311983f85ce1fb
31726 Author: Kyungmin Park <kmpark@infradead.org>
31727 Date: Mon Mar 31 10:40:19 2008 +0900
31729 Fix OneNAND erase command
31731 It mis-calculates the block address.
31732 Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
31734 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
31736 commit 61525f2ffa156665a66908fda47dbf29d65ea579
31737 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
31738 Date: Mon Mar 31 01:32:15 2008 +0200
31740 Support for LinkStation / KuroBox HD and HG PPC models
31742 This patch is based on the port by Mihai Georgian (see linkstation.c for
31743 Copyright information) and implements support for LinkStation / KuroBox HD
31744 and HG PPC models from Buffalo Technology, whereby HD is deactivated at
31745 the moment, pending network driver fixing.
31747 Notice to users: this is pretty much a barebone port. Support for network
31748 on HG models is already in the U-Boot mainline, but you might also want
31749 patches to switch fan / phy modes depending on the negotiated ethernet
31750 parameters. This patch also doesn't support console switching, booting EM
31751 mode, Buffalo specific ext2 magic number. So, if you want to use any of
31752 those, you need additional patches. Otherwise this patche provides a fully
31753 functional u-boot with a network console on your system.
31755 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31757 commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
31758 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
31759 Date: Sun Mar 30 01:22:13 2008 -0500
31761 Add CONFIG_MII_INIT support to related boards
31763 Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
31764 cmd_init.c. Add CONFIG_MII_INIT to board configuration files
31765 that use mii_init() in cmd_init.c.
31767 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
31768 Acked-by: Ben Warren <biggerbadderben@gmail.com>
31770 commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
31771 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
31772 Date: Sun Mar 30 01:19:06 2008 -0500
31774 Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
31776 Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
31777 CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
31779 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
31781 commit e99ccb488181d012248c6be30b2093e950319fc5
31782 Author: Kumar Gala <galak@kernel.crashing.org>
31783 Date: Thu Mar 27 11:46:38 2008 -0500
31785 Introduce phys_size_t and move phys_addr_t into asm/types.h
31787 Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
31788 that have larger physical addresses like 44x, 85xx, and 86xx.
31790 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31792 commit 20a14a42a25f72e379f38460b8a8484667536795
31793 Author: Andy Fleming <afleming@freescale.com>
31794 Date: Wed Apr 2 16:19:07 2008 -0500
31796 Rename include/md5.h to include/u-boot/md5.h
31798 Some systems have md5.h installed in /usr/include/. This isn't the
31799 desired file (we want the one in include/md5.h). This will avoid the
31800 conflict. This fixes the host tools building problem by creating a new
31801 directory for U-Boot specific header files.
31803 [Patch by Andy Fleming, modified to use separate directory by Wolfgang
31806 Signed-off-by: Wolfgang Denk <wd@denx.de>
31807 Signed-off-by: Andy Fleming <afleming@freescale.com>
31808 Acked-by: Timur Tabi <timur@freescale.com>
31810 commit f297b7a1ec87433f66320d89d993e1bc738c66b8
31811 Author: Dave Liu <r63238@freescale.com>
31812 Date: Thu Mar 27 18:51:17 2008 +0800
31814 drivers: code clean up
31816 Signed-off-by: Dave Liu <daveliu@freescale.com>
31818 commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
31819 Author: Dave Liu <r63238@freescale.com>
31820 Date: Thu Mar 27 18:50:41 2008 +0800
31822 drivers: clean up the ata_piix.h
31824 Signed-off-by: Dave Liu <daveliu@freescale.com>
31826 commit e8f7ba404f1409606962815ecc955a06984b08b3
31827 Author: Dave Liu <r63238@freescale.com>
31828 Date: Thu Mar 27 18:49:56 2008 +0800
31830 doc: english polishing for README.sata
31832 according to gvb's suggestion, polishing for the doc.
31834 Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
31835 Signed-off-by: Dave Liu <daveliu@freescale.com>
31837 commit 3e3f766a5274d204780460e1879723b565296d34
31838 Author: Kumar Gala <galak@kernel.crashing.org>
31839 Date: Wed Mar 26 18:53:28 2008 -0500
31841 Fix warnings introduced by I2C bus speed setting patch
31843 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31845 commit 3c735e7437150e8615f26930c7819db85634276d
31846 Author: eran liberty <eran.liberty@gmail.com>
31847 Date: Thu Mar 27 00:50:49 2008 +0100
31849 Altera Stratix II support
31851 Adds Support for Altera's Stratix II.
31853 Within your board specific init file you will have to call
31855 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
31856 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
31858 Altera_desc* contines (for example):
31860 Altera_StratixII, /* part type */
31861 passive_serial, /* interface type */
31862 1, /* bytes of data part can accept */
31863 (void *)(&funcs), /* interface function table */
31864 0L, /* base interface address */
31865 0 /* implementation specific cookie */
31868 funcs is the interface. It is of type altera_board_specific_func.
31869 It looks like this:
31870 altera_board_specific_func func = {
31881 you will have to implement these functions, which is usually bit
31884 Signed-off-by: Eran Liberty <liberty@extricom.com>
31886 commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
31887 Author: Wolfgang Denk <wd@denx.de>
31888 Date: Sun Apr 13 14:32:54 2008 -0700
31892 Signed-off-by: Wolfgang Denk <wd@denx.de>
31894 commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
31895 Author: Sascha Hauer <s.hauer@pengutronix.de>
31896 Date: Wed Mar 26 20:41:17 2008 +0100
31898 Phytec Phycore-i.MX31 support
31900 This patch adds support for the Phytec Phycore-i.MX31 board
31902 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
31903 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31905 commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
31906 Author: Sascha Hauer <s.hauer@pengutronix.de>
31907 Date: Wed Mar 26 20:41:09 2008 +0100
31909 mx31 litekit support
31911 This patch adds support for the mx31 litekit board
31913 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
31914 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31916 commit cdace0661208754a53019ea0dc7b803a040e0939
31917 Author: Sascha Hauer <s.hauer@pengutronix.de>
31918 Date: Wed Mar 26 20:40:49 2008 +0100
31920 add an i2c driver for mx31
31922 This patch adds an i2c driver for Freescale i.MX processors
31924 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
31925 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31927 commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
31928 Author: Sascha Hauer <s.hauer@pengutronix.de>
31929 Date: Wed Mar 26 20:40:42 2008 +0100
31931 core support for Freescale mx31
31933 This patch adds the core support for Freescale mx31
31935 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
31936 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31938 commit 7ec68862a27c8f6f6d566228de8f6724d964a939
31939 Author: Wolfgang Denk <wd@denx.de>
31940 Date: Sun Apr 13 14:19:23 2008 -0700
31944 ...as suggested by Peter Pearse
31946 Signed-off-by: Wolfgang Denk <wd@denx.de>
31948 commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
31949 Author: Sascha Hauer <s.hauer@pengutronix.de>
31950 Date: Wed Mar 26 20:40:36 2008 +0100
31952 Separate omap24xx specific code from arm1136
31954 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
31955 to cpu/arm1136/omap24xx.
31957 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
31958 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
31960 commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
31961 Author: Mike Frysinger <vapier@gentoo.org>
31962 Date: Tue Jan 29 18:21:05 2008 -0500
31964 disable caches before booting an app for Blackfin apps
31966 It isn't generally save to execute applications outside of U-Boot with caches
31967 enabled due to the way the Blackfin processor handles caches (requires
31968 software assistance). This patch disables caches before booting an ELF or
31969 just booting raw code. The previous discussion on the patch was that we
31970 wanted to use weaks instead, but that proved to not be feasible when multiple
31971 symbols are involved, which puts us back at the ifdef solution. I've
31972 minimized the ugliness by moving the setup step outside of the main function.
31974 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
31976 commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
31977 Author: Wolfgang Denk <wd@denx.de>
31978 Date: Sun Apr 13 10:03:54 2008 -0700
31980 ppc: Get rid of unused machine type definitions
31982 Signed-off-by: Wolfgang Denk <wd@denx.de>
31984 commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
31985 Author: Wolfgang Denk <wd@denx.de>
31986 Date: Sun Apr 13 09:59:26 2008 -0700
31988 Coding Style cleanup; update CHANGELOG
31990 Signed-off-by: Wolfgang Denk <wd@denx.de>
31992 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
31993 Author: Larry Johnson <lrj@acm.org>
31994 Date: Thu Feb 21 13:58:11 2008 -0500
31996 LM73 bug fix for negative temperatures and cleanup
31998 When the LM73 temperature sensor measures a temperature below 0 C, the
31999 current driver does not perform sign extension, so the result returned is
32000 512 C too high. This patch fixes the problem, and does general cleanup
32003 Signed-off-by: Larry Johnson <lrj@acm.org>
32005 commit 96ef831f713289afba19da0c8f905e99da2b23e0
32006 Author: Guennadi Liakhovetski <lg@denx.de>
32007 Date: Thu Apr 3 13:36:02 2008 +0200
32009 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
32011 Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
32012 series require different addresses for buffered write commands. Define a
32013 configuration option to support buffered writes on those chips. A more
32014 elegant solution would be to automatically detect those chips by parsing
32015 their CFI records, but that would require introduction of a fixup table
32016 into the cfi_flash driver.
32018 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32020 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
32021 Author: Lee Nipper <lee.nipper@freescale.com>
32022 Date: Thu Apr 10 09:35:06 2008 -0500
32024 mpc83xx: Update DIMM data bus width test to support 40-bit width
32026 32-bit wide ECC memory modules report 40-bit width.
32027 Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
32029 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
32030 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32032 commit 5fb5a689d822ca61e814bd523fc930af335242fa
32033 Author: Dave Liu <r63238@freescale.com>
32034 Date: Mon Mar 31 17:05:12 2008 +0800
32036 mpc83xx: Fix the bug of serdes initialization
32038 Currently the serdes will not be initializated due to the
32041 Signed-off-by: Dave Liu <daveliu@freescale.com>
32042 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32044 commit 2000784818f043db7ca60e2846a72d097766b894
32045 Author: Dave Liu <r63238@freescale.com>
32046 Date: Thu Apr 3 16:28:29 2008 +0800
32048 mpc83xx: Fix the SATA clock setting of 837x targets
32050 Currently the SATA controller clock is configured as CSB clock,
32051 usually the CSB clock is 400/333/266MHz.
32053 However, The SATA IP block is only guaranteed to operate up to
32054 200 MHz as stated in the HW spec.
32056 The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
32058 This patch makes the SATA clock as half of CSB clock.
32060 Signed-off-by: Dave Liu <daveliu@freescale.com>
32061 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32063 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
32064 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32065 Date: Wed Apr 2 13:41:21 2008 +0200
32067 mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
32069 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32070 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32072 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
32073 Author: Kumar Gala <galak@kernel.crashing.org>
32074 Date: Wed Apr 9 04:20:57 2008 -0500
32076 85xx: Fix detection of MP cpu spin up
32078 We were looking at the wrong memory offset to determine of a secondary
32079 cpu had been spun up or not. Also added a warning message if the
32080 all the secondary cpus we expect don't spin up.
32082 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32084 commit f3e04bdc3f360c66801a9048956e61e41a16edba
32085 Author: Kumar Gala <galak@kernel.crashing.org>
32086 Date: Tue Apr 8 10:45:50 2008 -0500
32088 85xx: Use SVR_SOC_VER instead of SVR_VER
32090 The recent change introduced by 'Update SVR numbers to expand support'
32091 now requires that we use SVR_SOC_VER instead of SVR_VER if we want
32092 to compare against a particular processor id.
32094 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32096 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
32097 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
32098 Date: Fri Apr 11 10:00:35 2008 -0400
32100 ppc4xx: Fix power mgt definitions for PPC440
32102 Corrected DCR addresses of PPC440EP power management registers.
32104 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
32106 commit 950a392464e616b4590bc4501be46e2d7d162dea
32107 Author: Wolfgang Denk <wd@denx.de>
32108 Date: Fri Apr 11 15:11:26 2008 +0200
32110 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
32112 Reverting became necessary after it turned out that the patches in
32113 the u-boot-arm repo were modified, and in some cases corrupted.
32115 This reverts the following commits:
32117 066bebd6353e33af3adefc3404560871699e9961
32118 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
32119 c88ae20580b2b01487b4cdcc8b2a113f551aee36
32120 a147e56f03871bba4f05058d5e04ce7deb010b04
32121 d6674e0e2a6a1f033945f78838566210d3f28c95
32122 8c8463cce44d849e37744749b32d38e1dfb12e50
32123 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
32124 8bf69d81782619187933a605f1a95ee1d069478d
32125 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
32126 a574a73852a527779234e73e17e7597fd8128882
32127 1377b5583a48021d983e1fd565f7d40c89e84d63
32128 1704dc20917b4f71e373e2c888497ee666d40380
32130 Signed-off-by: Wolfgang Denk <wd@denx.de>
32132 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
32133 Author: Stefan Roese <sr@denx.de>
32134 Date: Fri Apr 11 07:02:29 2008 +0200
32136 ppc4xx: Update Kilauea defconfig to use device-tree booting as default
32138 This patch reworks the default environment on Kilauea/Haleakala. Now
32139 "net_nfs" for exmaple uses the device-tree style booting formerly know
32140 as "net_nfs_fdt". Also the addresses in RAM were changed because of the
32141 new image booting support, which check for image overwriting. So the
32142 addresses needed togeet adjusted.
32144 Signed-off-by: Stefan Roese <sr@denx.de>
32146 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
32147 Author: Stefan Roese <sr@denx.de>
32148 Date: Wed Apr 9 11:58:02 2008 +0200
32150 ppc4xx: Fix Canyonlands default environment to work with new image support
32152 Since the new image support checks for image overwriting, the default
32153 environment needs to get adjusted to use correct addresses.
32155 Signed-off-by: Stefan Roese <sr@denx.de>
32157 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
32158 Author: Stefan Roese <sr@denx.de>
32159 Date: Wed Apr 9 11:54:11 2008 +0200
32161 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
32163 The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
32164 closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
32165 on 4xx systems _start currently cannot be used for this calculation.
32166 So revert back to the original version for now.
32168 Signed-off-by: Stefan Roese <sr@denx.de>
32170 commit f91374f65eae8b42cac329e06ba1c54728278efb
32171 Author: Michal Simek <monstr@monstr.eu>
32172 Date: Fri Mar 28 12:49:52 2008 +0100
32174 microblaze: Sort microblaze boards in MAKEALL script
32176 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
32177 Author: Michal Simek <monstr@monstr.eu>
32178 Date: Fri Mar 28 11:58:45 2008 +0100
32180 microblaze: clean microblaze_config.mk
32182 FLAGS are generated by U-BOOT generator.
32183 Board specific FLAGS are in board directory
32185 Signed-off-by: Michal Simek <monstr@monstr.eu>
32187 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
32188 Author: Michal Simek <monstr@monstr.eu>
32189 Date: Fri Mar 28 12:47:19 2008 +0100
32191 microblaze: xupv2p fix config file for supporting FDT
32193 commit 188dc16b189143573b1ed90e584bf866d75cdd12
32194 Author: Michal Simek <monstr@monstr.eu>
32195 Date: Fri Mar 28 11:53:02 2008 +0100
32197 microblaze: ml401 fix config file for supporting FDT
32199 Signed-off-by: Michal Simek <monstr@monstr.eu>
32201 commit 4c6a6f02e239236261333759997eeaf86b30b54c
32202 Author: Michal Simek <monstr@monstr.eu>
32203 Date: Fri Mar 28 11:22:48 2008 +0100
32205 microblaze: ml401 - add ifdef for GPIO
32207 Signed-off-by: Michal Simek <monstr@monstr.eu>
32209 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
32210 Author: Michal Simek <monstr@monstr.eu>
32211 Date: Fri Mar 28 12:13:03 2008 +0100
32213 microblaze: clean uart16550 and uartlite handling
32215 Signed-off-by: Michal Simek <monstr@monstr.eu>
32217 commit 0b20f250877441460fb79d72192954abe8498834
32218 Author: Michal Simek <monstr@monstr.eu>
32219 Date: Fri Mar 28 11:08:31 2008 +0100
32221 microblaze: Add Emaclite driver to Makefile
32223 Signed-off-by: Michal Simek <monstr@monstr.eu>
32225 commit 868cde5310f88234b774878e4f06e79df10a88b3
32226 Author: Michal Simek <monstr@monstr.eu>
32227 Date: Fri Mar 28 11:08:01 2008 +0100
32229 microblaze: Add Emac driver to Makefile
32231 Signed-off-by: Michal Simek <monstr@monstr.eu>
32233 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
32234 Author: Michal Simek <monstr@monstr.eu>
32235 Date: Fri Mar 28 12:42:29 2008 +0100
32237 microblaze: add Emac ethernet driver
32239 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
32240 Author: Michal Simek <monstr@monstr.eu>
32241 Date: Fri Mar 28 12:41:56 2008 +0100
32243 microblaze: add Emaclite ethernet driver
32245 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
32246 Author: Michal Simek <monstr@monstr.eu>
32247 Date: Fri Mar 28 11:04:01 2008 +0100
32249 microblaze: ML401 and XUPV2P remove emac and emaclite reference
32251 Signed-off-by: Michal Simek <monstr@monstr.eu>
32253 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
32254 Author: Michal Simek <monstr@monstr.eu>
32255 Date: Fri Mar 28 10:59:32 2008 +0100
32257 microblaze: remove old setting for emac driver
32259 Signed-off-by: Michal Simek <monstr@monstr.eu>
32261 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
32262 Author: Michal Simek <monstr@monstr.eu>
32263 Date: Fri Mar 28 10:58:15 2008 +0100
32265 microblaze: Clean Makefile from ancient emac driver
32267 Signed-off-by: Michal Simek <monstr@monstr.eu>
32269 commit ab68f921d9c741830f721c3d879c13a0c5597183
32270 Author: Daniel Hellstrom <daniel@gaisler.com>
32271 Date: Fri Mar 28 10:20:43 2008 +0100
32273 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
32275 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32277 commit 6ed8a43a19bb0275501bc286007daafa923552cf
32278 Author: Daniel Hellstrom <daniel@gaisler.com>
32279 Date: Wed Mar 26 23:38:48 2008 +0100
32281 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
32283 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32285 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
32286 Author: Daniel Hellstrom <daniel@gaisler.com>
32287 Date: Wed Mar 26 23:34:47 2008 +0100
32289 SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
32291 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32293 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
32294 Author: Daniel Hellstrom <daniel@gaisler.com>
32295 Date: Fri Mar 28 10:06:52 2008 +0100
32297 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
32299 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32301 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
32302 Author: Daniel Hellstrom <daniel@gaisler.com>
32303 Date: Wed Mar 26 23:26:48 2008 +0100
32305 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
32307 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32309 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
32310 Author: Daniel Hellstrom <daniel@gaisler.com>
32311 Date: Fri Mar 28 10:00:33 2008 +0100
32313 SPARC: Added support for SPARC LEON2 SOC Processor.
32315 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32317 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
32318 Author: Daniel Hellstrom <daniel@gaisler.com>
32319 Date: Wed Mar 26 23:00:38 2008 +0100
32321 SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
32323 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32325 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
32326 Author: Daniel Hellstrom <daniel@gaisler.com>
32327 Date: Wed Mar 26 22:51:29 2008 +0100
32329 SPARC: Added support for SPARC LEON3 SOC processor.
32331 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32333 commit bf3d8b31169546fcddb4737391e1893fb12d033a
32334 Author: Daniel Hellstrom <daniel@gaisler.com>
32335 Date: Fri Mar 28 08:29:26 2008 +0100
32337 SPARC: added SPARC support for new uimage in common code.
32339 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32341 commit 00ab32c85405a4fe65fd4128243086210fc90a21
32342 Author: Daniel Hellstrom <daniel@gaisler.com>
32343 Date: Wed Mar 26 22:36:03 2008 +0100
32345 SPARC: added SPARC board information to the command bdinfo.
32347 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32349 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
32350 Author: Daniel Hellstrom <daniel@gaisler.com>
32351 Date: Fri Mar 28 09:47:00 2008 +0100
32353 SPARC: Added generic support for SPARC architecture.
32355 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32357 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
32358 Author: Stefan Roese <sr@denx.de>
32359 Date: Thu Apr 3 14:50:34 2008 +0200
32361 ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
32363 This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
32364 has 2 RGMII instances and we need to configure the 2nd RGMII instance
32365 for the EMAC2+3 channels.
32367 Signed-off-by: Stefan Roese <sr@denx.de>
32369 commit c2a545ce33b26d80337f80b533828839249fb1c9
32370 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32371 Date: Wed Apr 2 08:03:56 2008 +0200
32373 MPC8xx: Fix libfdt support introduced in commit 77ff7b74
32375 fdt.c: In function 'ft_cpu_setup':
32376 fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
32377 fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
32378 fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
32379 fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
32381 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32383 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
32384 Author: Andy Fleming <afleming@freescale.com>
32385 Date: Mon Mar 31 20:45:56 2008 -0500
32387 Fix fdt set command to conform to dts spec
32389 The fdt set command was treating properties specified as <00> and <0011>
32390 as byte streams, rather than as an array of cells. As we already have
32391 syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
32392 we should use the <> syntax to describe arrays of cells, which are always
32393 32-bits per element. If we imagine this likely (IMHO) scenario:
32395 > fdt set /ethernet-phy@1 reg <1>
32397 With the old code, this would create a bad fdt, since the reg cell would be
32398 made to be one byte in length. But the cell must be 4 bytes, so this would
32399 break mysteriously.
32401 Also, the dts spec calls for constants inside the angle brackets (<>)
32402 to conform to C constant standards as they pertain to base.
32403 Take this scenario:
32405 > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
32407 The old fdt command would complain that it couldn't parse that. Or, if you
32408 wanted to specify that a certain clock ran at 33 MHz, you'd be required to
32411 > fdt set /mydev clock <1f78a40>
32413 Whereas the new code will accept decimal numbers.
32415 While I was in there, I extended the fdt command parser to handle property
32416 strings which are split across multiple arguments:
32418 > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
32419 > fdt p /ethernet@f00
32421 interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
32424 Lastly, the fdt print code was rearranged slightly to print arrays of cells
32425 if the length of the property is a multiple of 4 bytes, and to not print
32428 Signed-off-by: Andy Fleming <afleming@freescale.com>
32430 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
32431 Author: Stefan Roese <sr@denx.de>
32432 Date: Wed Apr 2 08:39:33 2008 +0200
32434 ppc4xx: Canyonlands: Init SATA/PCIe port correctly
32436 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
32437 interface. This usage can be configured with the jumper J6. This patch
32438 correctly configures the SATA/PCIe PHY for SATA usage when this jumper
32441 Signed-off-by: Stefan Roese <sr@denx.de>
32443 commit 6fe2946f198481254a6ee9600d7456b8316a4083
32444 Author: Kim Phillips <kim.phillips@freescale.com>
32445 Date: Fri Mar 28 17:37:49 2008 -0500
32447 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
32449 finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
32450 "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
32453 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32455 commit b5873f1732b92a25690e1513b90dfb0d644f6697
32456 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32457 Date: Tue Apr 1 07:30:51 2008 +0200
32459 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
32461 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32463 commit 2d934ea51f276522b532f870a820e844ff480b5b
32464 Author: Tor Krill <tor@excito.com>
32465 Date: Fri Mar 28 15:29:45 2008 +0100
32467 Add Vitesse 8601 support to TSEC driver
32469 Add phy_info for Vitesse VSC8601.
32470 Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
32472 Signed-off-by: Tor Krill <tor@excito.com>
32473 Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
32474 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
32476 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
32477 Author: Daniel Hellstrom <daniel@gaisler.com>
32478 Date: Mon Mar 31 14:25:00 2008 +0000
32480 SPARC: added SMC91111 driver in and out macros for LEON processors.
32482 This patch makes SPARC/LEON processors able to read and write
32483 to the SMC91111 chip using the chip external I/O bus of the memory
32484 controller. This patchs defines the standard in and out macros
32485 expected by the SMC9111 driver.
32487 To access that I/O bus one must set up the memory controller
32488 (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
32489 up this correctly when the other MCTRL parameters are set up. It
32490 can be set up from the board configuration header file.
32492 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
32493 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
32495 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
32496 Author: Stelian Pop <stelian@popies.net>
32497 Date: Wed Mar 26 18:52:34 2008 +0100
32499 Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
32501 Signed-off-by: Stelian Pop <stelian@popies.net>
32503 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
32504 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32505 Date: Mon Mar 31 21:31:04 2008 +0200
32507 AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
32509 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32511 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
32512 Author: Stelian Pop <stelian@popies.net>
32513 Date: Wed Mar 26 18:52:33 2008 +0100
32515 Add support for AT91SAM9260EK
32517 Support for booting from internal DataFlash, external DataFlash card
32518 or NAND flash is available.
32520 Signed-off-by: Stelian Pop <stelian@popies.net>
32522 commit 1762f13b4aab88b685b1722f17dada247945624b
32523 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32524 Date: Mon Mar 31 21:20:49 2008 +0200
32526 AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
32528 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32530 commit 761712188b353494defb2b644491ff73d0daaa6f
32531 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32532 Date: Mon Mar 31 21:12:17 2008 +0200
32534 AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
32536 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32538 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
32539 Author: Stelian Pop <stelian@popies.net>
32540 Date: Wed Mar 26 20:52:32 2008 +0100
32542 Port AT91CAP9 to the new headers
32544 Adapt the existing AT91CAP9 code to the new headers and APIs.
32546 Signed-off-by: Stelian Pop <stelian@popies.net>
32548 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
32549 Author: Stelian Pop <stelian@popies.net>
32550 Date: Wed Mar 26 19:52:31 2008 +0100
32552 Finish header files reworking
32554 Replace AT91CAP9.h file with several splitted header files coming
32555 from the Linux kernel.
32557 This is part 2 of the replacement: more header imports and edits.
32559 Signed-off-by: Stelian Pop <stelian@popies.net>
32561 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
32562 Author: Stelian Pop <stelian@popies.net>
32563 Date: Wed Mar 26 19:52:30 2008 +0100
32565 Import several header files from Linux
32567 Replace AT91CAP9.h file with several splitted header files coming
32568 from the Linux kernel.
32570 This is part 1 of the replacement: pristine header files import.
32572 Signed-off-by: Stelian Pop <stelian@popies.net>
32574 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
32575 Author: Stelian Pop <stelian@popies.net>
32576 Date: Wed Mar 26 20:52:28 2008 +0100
32578 Move at91cap9 specific files to at91sam9 directory
32580 AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
32581 common infrastructure can be used. Let this infrastructure be
32582 named after the AT91SAM9 family, and move the existing AT91CAP9
32583 files to the new place.
32585 Signed-off-by: Stelian Pop <stelian@popies.net>
32587 commit 61106a565870ff503f92b251b94bd7afef889a04
32588 Author: Stelian Pop <stelian@popies.net>
32589 Date: Wed Mar 26 21:52:27 2008 +0100
32591 Use timer_init() instead of board supplied interrupt_init()
32593 The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
32594 the board, so use timer_init() instead of interrupt_init().
32596 Signed-off-by: Stelian Pop <stelian@popies.net>
32598 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
32599 Author: Stelian Pop <stelian@popies.net>
32600 Date: Wed Mar 26 21:52:36 2008 +0100
32602 Cleanup DataFlash partition handling
32604 DataFlash partition information has become a mess. This patch
32605 defines a single partition scheme for Atmel DataFlashes. This partition
32606 scheme will be used by all AT91CAP9 and AT91SAM9 boards.
32608 Signed-off-by: Stelian Pop <stelian@popies.net>
32610 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
32611 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32612 Date: Fri Mar 28 08:47:45 2008 -0500
32614 ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
32616 When the version_string function in start.S is not 4-byte align,
32617 it will cause the compiler generates "unaligned opcodes detected
32618 in executable segment". This issue affects all ColdFire CPUs.
32619 By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
32622 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32623 Acked-by: John Rigby <jrigby@freescale.com>
32625 commit bae61eefe15b4d454060a7140e49ae58322be803
32626 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32627 Date: Tue Mar 25 15:41:15 2008 -0500
32629 ColdFire: Add dspi and serial flash support for MCF5445x
32631 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32632 Acked-by: John Rigby <jrigby@freescale.com>
32634 commit 48ead7a7a922fceaf494e352abfab8216a41b417
32635 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32636 Date: Tue Mar 18 17:37:01 2008 -0500
32638 ColdFire: Remove R5200 board
32640 This board never went into production
32642 Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
32643 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32644 Acked-by: John Rigby <jrigby@freescale.com>
32646 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
32647 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
32648 Date: Thu Jan 24 14:02:32 2008 -0600
32650 ColdFire: Added M5275EVB support.
32652 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
32653 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32654 Acked-by: John Rigby <jrigby@freescale.com>
32656 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
32657 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
32658 Date: Mon Feb 4 15:38:20 2008 -0600
32660 ColdFire: Added MCF5275 cpu support.
32662 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
32663 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32664 Acked-by: John Rigby <jrigby@freescale.com>
32666 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
32667 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32668 Date: Mon Mar 17 12:14:11 2008 -0500
32670 ColdFire: Define bootdelay in configuration file for M52277EVB
32672 Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
32673 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32674 Acked-by: John Rigby <jrigby@freescale.com>
32676 commit 77878f16cedee17161ff2336990970fffc6cea35
32677 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32678 Date: Mon Mar 17 12:09:07 2008 -0500
32680 ColdFire: Fix second memory Chipselect for M5475EVB
32682 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32683 Acked-by: John Rigby <jrigby@freescale.com>
32685 commit 43d60642395a550956cb21d287c8cfa563913d28
32686 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32687 Date: Thu Mar 13 14:26:32 2008 -0500
32689 ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
32691 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
32692 Acked-by: John Rigby <jrigby@freescale.com>
32694 commit eb14ebe813a0cb5d47905228da446a5ad692473b
32695 Author: Larry Johnson <lrj@acm.org>
32696 Date: Sun Mar 30 20:33:04 2008 -0500
32698 ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
32700 Signed-off-by: Larry Johnson <lrj@acm.org>
32702 commit 02e3892021112f21067d9ed1d04ae4182725ba52
32703 Author: Stefan Roese <sr@denx.de>
32704 Date: Mon Mar 31 12:20:48 2008 +0200
32706 ppc4xx: Small whitespace fix of esd patches
32708 Signed-off-by: Stefan Roese <sr@denx.de>
32710 commit 034394abb524785047c815f00dde8cdbdc1593c5
32711 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
32712 Date: Sun Mar 30 18:52:44 2008 +0200
32714 ppc4xx: Cleanup PMC440 board support
32716 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
32718 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
32719 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
32720 Date: Sun Mar 30 18:52:06 2008 +0200
32722 ppc4xx: Add ptm configuration variables for PMC440
32724 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
32725 environment variables.
32727 Cleanup pci_target_init.
32729 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
32731 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
32732 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
32733 Date: Sun Mar 30 18:01:15 2008 +0200
32735 ppc4xx: Minor updates for DU440 boards
32737 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
32739 commit d5bffeb868d6b4d462f558dac43011027b6644b7
32740 Author: Mike Frysinger <vapier@gentoo.org>
32741 Date: Tue Feb 19 00:54:20 2008 -0500
32743 Blackfin: cleanup and overhaul common board init functions
32745 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32747 commit b86b3416f874358acaf07519e7620cdb2145f75b
32748 Author: Mike Frysinger <vapier@gentoo.org>
32749 Date: Tue Feb 19 00:50:58 2008 -0500
32751 Blackfin: cleanup lib_blackfin/cache.c
32753 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32755 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
32756 Author: Mike Frysinger <vapier@gentoo.org>
32757 Date: Sun Mar 30 15:46:13 2008 -0400
32759 Blackfin: unify cpu and boot modes
32761 All of the duplicated code for Blackfin processors and boot modes have been
32762 unified. After all, the core is the same for all processors, just the
32763 peripheral set differs (which gets handled in the drivers).
32765 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32767 commit 880cc4381ea8360248cddcdf87a64566745a5724
32768 Author: Stelian Pop <stelian@popies.net>
32769 Date: Wed Mar 26 22:52:35 2008 +0100
32771 Fix CFG_NO_FLASH compilation.
32773 Many Atmel boards have no "real" (NOR) flash on board, and rely only
32774 on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
32775 be present in a board configuration file, while still enabling flash
32776 commands like 'flinfo', 'protect', etc.
32778 Signed-off-by: Stelian Pop <stelian@popies.net>
32780 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
32781 Author: Mike Frysinger <vapier@gentoo.org>
32782 Date: Tue Feb 19 00:58:13 2008 -0500
32784 Blackfin: BF537-stamp: cleanup spi flash driver
32786 This punts the old spi flash driver for a new/generalized one until the
32787 common one can be integrated.
32789 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
32791 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
32792 Author: Ben Warren <biggerbadderben@gmail.com>
32793 Date: Sun Mar 30 11:34:34 2008 -0400
32795 Fix macro typo in common/cmd_mii.c
32797 This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
32798 actually applied the wrong patch.
32800 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
32802 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
32803 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32804 Date: Sun Mar 30 16:39:53 2008 +0200
32806 use correct at91rm9200 register name in m501sk board
32808 This fixes a naming bug for at91rm9200 lowlevel init code:
32809 NOR boot flash is on chipselect 0, not chipselect 2. This
32810 makes code use the register name from chip datasheets.
32812 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
32814 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
32815 Author: David Brownell <david-b@pacbell.net>
32816 Date: Fri Jan 18 12:55:00 2008 -0800
32818 use correct at91rm9200 register name
32820 This fixes a naming bug for at91rm9200 lowlevel init code:
32821 NOR boot flash is on chipselect 0, not chipselect 2. This
32822 makes code use the register name from chip datasheets.
32824 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
32826 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
32827 Author: David Brownell <david-b@pacbell.net>
32828 Date: Fri Jan 18 12:45:45 2008 -0800
32830 add missing ARM boards to MAKEALL
32832 Add some missing ARM boards to MAKEALL. These build correctly,
32833 unlike several of the boards already listed.
32835 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
32837 commit 066bebd6353e33af3adefc3404560871699e9961
32838 Author: Peter Pearse <peter.pearse@arm.com>
32839 Date: Sun Mar 30 11:34:09 2008 +0100
32841 Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
32842 to prevent compilation error.
32844 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
32846 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
32847 Author: Guennadi Liakhovetski <[lg@denx.de]>
32848 Date: Sun Mar 30 11:32:30 2008 +0100
32850 Support for the MX31ADS evaluation board from Freescale
32852 This patch adds support for the MX31ADS evaluation board from Freescale,
32853 initialization code is copied from RedBoot sources, also provided by Freescale.
32855 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32857 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
32858 Author: Sascha Hauer <s.hauer@pengutronix.de>
32859 Date: Sun Mar 30 11:32:27 2008 +0100
32861 Phytec Phycore-i.MX31 support
32863 This patch adds support for the Phytec Phycore-i.MX31 board
32865 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32866 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32868 commit a147e56f03871bba4f05058d5e04ce7deb010b04
32869 Author: Sascha Hauer <s.hauer@pengutronix.de>
32870 Date: Sun Mar 30 11:32:24 2008 +0100
32872 mx31 litekit support
32874 This patch adds support for the mx31 litekit board
32876 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32877 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32879 commit d6674e0e2a6a1f033945f78838566210d3f28c95
32880 Author: Sascha Hauer <s.hauer@pengutronix.de>
32881 Date: Sun Mar 30 11:32:21 2008 +0100
32883 add SMSC LAN9x1x Network driver
32885 This patch adds a driver for the following smsc network controllers:
32893 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32894 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32896 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
32897 Author: Sascha Hauer <s.hauer@pengutronix.de>
32898 Date: Sun Mar 30 11:32:16 2008 +0100
32900 add an i2c driver for mx31
32902 This patch adds an i2c driver for Freescale i.MX processors
32904 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32905 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32907 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
32908 Author: Sascha Hauer <s.hauer@pengutronix.de>
32909 Date: Sun Mar 30 11:30:43 2008 +0100
32911 core support for Freescale mx31
32913 This patch adds the core support for Freescale mx31
32915 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32916 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32918 commit 8bf69d81782619187933a605f1a95ee1d069478d
32919 Author: Sascha Hauer <s.hauer@pengutronix.de>
32920 Date: Sun Mar 30 11:28:46 2008 +0100
32922 Separate omap24xx specific code from arm1136
32924 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
32926 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
32927 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
32929 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
32930 Author: Peter Pearse <peter.pearse@arm.com>
32931 Date: Sun Mar 30 11:23:05 2008 +0100
32933 Add pmdra into MAKEALL
32935 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
32937 commit a574a73852a527779234e73e17e7597fd8128882
32938 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
32939 Date: Sun Mar 30 11:21:58 2008 +0100
32941 Adds support for the Prodrive PMDRA board, based on a DM6441
32943 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
32945 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
32946 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
32947 Date: Sun Mar 30 11:11:34 2008 +0100
32949 Removes all board specific code from the arch. part for DM644x (DaVinci) boards
32951 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
32953 commit 1704dc20917b4f71e373e2c888497ee666d40380
32954 Author: Dirk Behme <dirk.behme@gmail.com>
32955 Date: Sun Mar 30 11:09:01 2008 +0100
32957 - Remove *_masked() functions as noted by Wolfgang
32958 - Adapt register naming to recent TI spec (sprue26, March 2007)
32959 - Fix reset_timer() handling
32960 - As reported by Pieter [1] the overflow fix introduced a
32961 delay of factor 16 (e.g 2 seconds became 32). While the
32962 overflow fix is basically okay, it missed to divide udelay by
32964 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
32965 - Remove software division of timer count value (DIV(x)
32966 macro) and do it in hardware (TIM_CLK_DIV).
32967 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
32968 and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
32969 the hints & testing!
32971 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
32973 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
32975 commit ac3315c26e143c31680750c9c13f027efbcc887e
32976 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
32977 Date: Thu Mar 6 16:45:44 2008 +0100
32979 new PHY @ e1000 - 2nd try
32981 Add 82541ER device with latest integrated IGP2 PHY.
32982 Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
32984 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
32985 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
32987 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
32988 Author: Daniel Hellstrom <daniel@gaisler.com>
32989 Date: Fri Mar 28 20:22:53 2008 +0100
32991 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
32993 GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
32994 a debug link (EDCL). The GRETH core is documented in GRIP.pdf
32995 available at www.gaisler.com.
32997 If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
32998 offloading etc.) can be determined by a bit in the control register.
32999 The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
33001 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33002 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33004 commit 233a8bcd94997f3f345833a3b82e836222f2a206
33005 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
33006 Date: Mon Mar 17 17:08:22 2008 -0500
33008 Add CONFIG_MII_INIT in cmd_mii.c
33010 Provide common configuration in do_mii() to execute mii_init()
33011 for all cpu architectures
33013 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33014 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33016 commit f605479de2deb11e834f31dfdb0af107c86aced6
33017 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
33018 Date: Mon Mar 17 17:08:16 2008 -0500
33020 ColdFire: Fix FEC transmit issue for MCF5275
33022 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
33023 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33025 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
33026 Author: Aras Vaichas <arasv@magtech.com.au>
33027 Date: Wed Mar 26 09:43:57 2008 +1100
33029 DHCP request fix for Windows Server 2003
33031 Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
33032 delay before sending "DHCP Request" in net/bootp.c. Required to overcome
33033 interoperability problems with Windows Server 200x DHCP server when U-Boot
33034 client responds too fast for server to handle.
33036 Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
33037 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
33039 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
33040 Author: Daniel Hellstrom <daniel@gaisler.com>
33041 Date: Fri Mar 28 20:40:19 2008 +0100
33043 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
33045 SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
33046 SPARC CPUs implement flash_read64 which calls __raw_readq.
33048 For current SPARC architectures (LEON2 and LEON3) each read from the
33049 FLASH must lead to a cache miss. This is because FLASH can not be set
33050 non-cacheable since program code resides there, and alternatively disabling
33051 cache is poor from performance view, or doing a cache flush between each
33052 read is even poorer.
33054 Forcing a cache miss on a SPARC is done by a special instruction "lda" -
33055 load alternative space, the alternative space number (ASI) is processor
33056 implementation spcific and can be found by including <asm/processor.h>.
33058 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
33060 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
33061 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
33062 Date: Fri Mar 28 15:41:25 2008 +0100
33064 Make MPC83xx one step closer to full relocation.
33066 Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
33067 and use GOT relative reference.
33069 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
33070 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33072 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
33073 Author: Michael Barkowski <michael.barkowski@freescale.com>
33074 Date: Thu Mar 27 14:34:43 2008 -0400
33076 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
33078 This patch fixes eeprom page size so that you can now write more than
33079 64 bytes at a time.
33081 It also makes the board take MAC addresses, if found, from EEPROM.
33083 User should place up to 4 addresses at offset 0x7f00, for
33084 eth{,1,2,3}addr. Any unused addresses should be zero. This group of
33085 four six-byte values should have it's CRC at the end. crc32 and
33086 eeprom commands can be used to accomplish this.
33088 If CRC fails, MAC addresses come from the environment. If CRC
33089 succeeds, the environment is overwritten at startup.
33091 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
33092 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33094 commit 8f325cff31f6e745e6540014b131b9a97f61944c
33095 Author: Michael Barkowski <michael.barkowski@freescale.com>
33096 Date: Fri Mar 28 15:15:38 2008 -0400
33098 mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
33100 Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
33101 controller on the PCI bus in Linux on the MPC8323ERDB.
33103 This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
33106 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
33107 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33109 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
33110 Author: Kim Phillips <kim.phillips@freescale.com>
33111 Date: Fri Mar 28 10:19:07 2008 -0500
33113 mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
33115 in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
33116 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
33117 and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
33118 REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
33119 convenience macros.
33121 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33123 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
33124 Author: Kim Phillips <kim.phillips@freescale.com>
33125 Date: Fri Mar 28 10:18:53 2008 -0500
33127 mpc83xx: display ddr frequency in board_add_ram_info banner
33129 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33131 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
33132 Author: Kim Phillips <kim.phillips@freescale.com>
33133 Date: Fri Mar 28 10:18:40 2008 -0500
33135 mpc83xx: unreinvent mem_clk
33137 delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
33138 mem_*_clk for consistency's sake.
33140 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33142 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
33143 Author: Kim Phillips <kim.phillips@freescale.com>
33144 Date: Fri Mar 28 14:31:23 2008 -0500
33146 mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
33148 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33150 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
33151 Author: Dave Liu <r63238@freescale.com>
33152 Date: Wed Mar 26 22:57:19 2008 +0800
33154 mpc83xx: enable the SATA interface on mpc837xemds board
33156 Enable the first two SATA interfaces on MPC837xEMDS board,
33157 The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
33159 Signed-off-by: Dave Liu <daveliu@freescale.com>
33160 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33162 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
33163 Author: Dave Liu <r63238@freescale.com>
33164 Date: Wed Mar 26 22:56:36 2008 +0800
33166 mpc83xx: initialize serdes for MPC837xEMDS boards
33168 This patch is stolen from Anton Vorontsov's patch
33169 for mpc837xerdb boards.
33171 The reference clk and xcorevdd voltage of serdes1/2
33172 is same between mpc837xemds and mpc837xerdb.
33174 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
33175 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
33176 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
33178 Signed-off-by: Dave Liu <daveliu@freescale.com>
33179 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33181 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
33182 Author: Stefan Roese <sr@denx.de>
33183 Date: Fri Mar 28 14:09:04 2008 +0100
33185 ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
33187 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
33188 interface. This usage can be configured with the jumper J6. This patch
33189 displays the current configuration upon bootup and changes the PCIe
33190 init loop, to only initialize the availabel PCIe slots.
33192 Signed-off-by: Stefan Roese <sr@denx.de>
33194 commit 90447ecbbac8572457b6d8903073ac3f120995ba
33195 Author: Tor Krill <tor@excito.com>
33196 Date: Fri Mar 28 11:29:10 2008 +0100
33198 MTD/CFI: Add support for 16bit legacy AMD flash
33200 Add entry for 512Kx16 AMD flash to jedec_table.
33201 Read out 16bit device id if chipwidth is 16bit.
33202 Fixed coding style after Stefans feedback
33204 Signed-off-by: Tor Krill <tor@excito.com>
33206 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
33207 Author: Stefan Roese <sr@denx.de>
33208 Date: Fri Mar 28 11:02:53 2008 +0100
33210 ppc: Small change to CFG_MEM_TOP_HIDE description
33212 Signed-off-by: Stefan Roese <sr@denx.de>
33214 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
33215 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33216 Date: Thu Mar 27 15:44:12 2008 +0900
33218 sh: Add support stat structure and stat.h
33220 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33222 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
33223 Author: Mark Jonas <toertel@gmail.com>
33224 Date: Sat Mar 22 19:27:52 2008 +0100
33226 sh: Removed warning when compiling drivers/serial/serial_sh.c.
33228 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
33229 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33231 commit f309fa38929ffba71230c02330ffa42f4bba6333
33232 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33233 Date: Wed Mar 12 18:02:57 2008 +0900
33235 sh: Remove disable_ctrlc function from R7780MP
33237 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33239 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
33240 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33241 Date: Wed Mar 12 17:55:15 2008 +0900
33243 sh: Add maintainer of R7780MP to MAINTAINER file
33245 Update MAINTAINER entry for R7780MP. And fix maintainer's name.
33247 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33249 commit f5e2466f7baa887a7df0c536333eea8231333497
33250 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33251 Date: Tue Mar 25 17:11:24 2008 +0900
33253 sh: Add support Renesas Solutions R2D plus board
33255 R2D plus is SH reference board used with SH7751R.
33256 This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
33257 one PCI bus, VGA, and two Ethernet controller.
33259 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33261 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
33262 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33263 Date: Wed Mar 12 12:15:29 2008 +0900
33265 sh: Add support SH4 cache control
33267 Add support SH4 cache control and flash_cache function
33269 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33271 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
33272 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33273 Date: Mon Mar 24 01:53:01 2008 +0900
33275 sh: Add support PCI host driver for SH7751/SH7751R
33277 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33279 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
33280 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33281 Date: Mon Mar 24 02:11:26 2008 +0900
33283 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
33285 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33287 commit 566933278101c144d75361ea682678a326c1290d
33288 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33289 Date: Wed Mar 12 12:10:28 2008 +0900
33291 sh: Add support SuperH SH7751/SH7751R
33293 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33295 commit 3313e0e26224fc9a0c445124f3455058c696df84
33296 Author: Mark Jonas <toertel@gmail.com>
33297 Date: Mon Mar 10 11:37:10 2008 +0100
33299 sh: Added support for SH7720 based board MPR2.
33301 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
33302 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33304 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
33305 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33306 Date: Thu Mar 6 14:05:53 2008 +0900
33308 sh: Fix receive FIFO level register of SH4A
33310 Receive FIFO level register is different in SH4A.
33311 Because register is different, cannot occasionally receive data.
33313 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33315 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
33316 Author: Yusuke Goda <goda.yusuke@renesas.com>
33317 Date: Tue Mar 11 12:55:12 2008 +0900
33319 sh: Add support Renesas Solutions R7780MP
33321 Renesas Solutions R7780MP is a reference board on SH7780.
33322 This board has serial, 10/100 base Ethernet deivice, CF slot
33323 and VGA devices. This board can set extension board.
33324 Extension board has 10/100/1000 base Ethernet device, PCI slot,
33327 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
33328 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33330 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
33331 Author: Yusuke Goda <goda.yusuke@renesas.com>
33332 Date: Wed Mar 5 14:30:02 2008 +0900
33334 sh: Add support PCI of SuperH and SH7780
33336 This patch add support PCI of SuperH base code and SH7780 specific code.
33338 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
33339 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33341 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
33342 Author: Yusuke Goda <goda.yusuke@renesas.com>
33343 Date: Wed Mar 5 14:23:26 2008 +0900
33345 sh: Add support SH7780
33347 SH7780 is CPU of Renesas Technology.
33351 - DDR-SDRAM controller
33354 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
33355 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33357 commit c2042f5952a686c414031309b8f244513bf578f0
33358 Author: goda.yusuke <goda.yusuke@renesas.com>
33359 Date: Fri Jan 25 20:46:36 2008 +0900
33361 sh: Add support Renesas Solutions Migo-R board
33363 Migo-R is a board based on SH7722 and has may devices.
33364 In this patch, supported SCIF, NOR flash and Ethernet.
33366 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
33367 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
33369 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
33370 Author: Bartlomiej Sieka <tur@semihalf.com>
33371 Date: Thu Mar 27 15:06:40 2008 +0100
33373 Fix host tool build breakage, take two
33375 Revert commit 87c8431f and fix build breakage so that the build continues
33376 to work on FC systems.
33378 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
33380 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
33381 Author: Stefan Roese <sr@denx.de>
33382 Date: Wed Mar 19 09:36:47 2008 +0100
33384 ppc4xx: Enable ECC on LWMON5
33386 Since all ECC related problems seem to be resolved on LWMON5, this patch
33387 now enables ECC support.
33389 We have to write the ECC bytes by zeroing and flushing in smaller
33390 steps, since the whole 256MByte takes too long for the external
33393 Signed-off-by: Stefan Roese <sr@denx.de>
33395 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
33396 Author: Larry Johnson <lrj@acm.org>
33397 Date: Mon Mar 17 11:10:35 2008 -0500
33399 ppc4xx: Updates to Korat-specific code
33401 This patch contains updates for changes for the Korat PPC440EPx board.
33402 These changes include:
33404 (1) Support for "permanent" and "upgradable" copies of U-Boot, as
33405 described in the new "doc/README.korat" file;
33407 (2) a new memory map for the registers in the board's CPLD;
33409 (3) a revised format for manufacturer's data in serial EEPROM; and
33411 (4) changes to track updates to U-Boot for the Sequoia board.
33413 Signed-off-by: Larry Johnson <lrj@acm.org>
33415 commit f766cdf89b3a2a7634b8c5869f606150e332036c
33416 Author: Markus Brunner <super.firetwister@gmail.com>
33417 Date: Thu Mar 27 10:46:25 2008 +0100
33419 ppc4xx: PPC405EP Set EMAC noise filter bits
33421 This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
33422 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
33423 disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
33425 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
33426 Signed-off-by: Stefan Roese <sr@denx.de>
33428 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
33429 Author: Mike Nuss <mike@terascala.com>
33430 Date: Wed Feb 20 11:54:20 2008 -0500
33432 ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
33434 On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
33435 after startup to change the speed of the clocks. This patch adds the
33436 option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
33437 initialization code will reconfigure the PLL to run the system with a CPU
33438 frequency of 667MHz and PLB frequency of 166MHz, without the need for an
33441 Signed-off-by: Mike Nuss <mike@terascala.com>
33442 Acked-by: Stefan Roese <sr@denx.de>
33444 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
33445 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
33446 Date: Thu Mar 27 09:12:40 2008 +0100
33448 new-image: Fix host tool build breakage
33450 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
33452 commit 6fb4b640562a10daff0dbe537638d511b5b48650
33453 Author: Stefan Roese <sr@denx.de>
33454 Date: Thu Mar 27 10:24:03 2008 +0100
33456 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
33458 Signed-off-by: Stefan Roese <sr@denx.de>
33460 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
33461 Author: Stefan Roese <sr@denx.de>
33462 Date: Wed Mar 19 10:23:43 2008 +0100
33464 ppc4xx: Add fdt support to Prodrive alpr
33466 Since this board will probably be ported to arch/powerpc in the
33467 near future, we add device tree support now. This way we are
33468 "ready" for arch/powerpc from now on.
33470 Signed-off-by: Stefan Roese <sr@denx.de>
33472 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
33473 Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
33474 Date: Mon Mar 17 09:27:56 2008 +0100
33476 ppc4xx: Enable cache support on the ALPR board
33478 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
33480 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
33481 Author: Stefan Roese <sr@denx.de>
33482 Date: Wed Mar 26 10:14:11 2008 +0100
33484 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
33486 If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
33487 memory area will get subtracted from the top (end) of ram and won't get
33488 "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
33489 should gets passed the now "corrected" memory size and won't touch it
33490 either. This should work for arch/ppc and arch/powerpc. Only Linux board
33491 ports in arch/powerpc with bootwrapper support, which recalculate the
33492 memory size from the SDRAM controller setup, will have to get fixed
33493 in Linux additionally.
33495 This patch enables this config option on some PPC440EPx boards as a workaround
33496 for the CHIP 11 errata. Here the description from the AMCC documentation:
33498 CHIP_11: End of memory range area restricted access.
33502 The 440EPx DDR controller does not acknowledge any
33503 transaction which is determined to be crossing over the
33504 end-of-memory-range boundary, even if the starting address is
33505 within valid memory space. Any such transaction from any PLB4
33506 master will result in a PLB time-out on PLB4 bus.
33509 In case of such misaligned bursts, PLB4 masters will not
33510 retrieve any data at all, just the available data up to the
33511 end of memory, especially the 440 CPU. For example, if a CPU
33512 instruction required an operand located in memory within the
33513 last 7 words of memory, the DCU master would burst read 8
33514 words to update the data cache and cross over the
33515 end-of-memory-range boundary. Such a DCU read would not be
33516 answered by the DDR controller, resulting in a PLB4 time-out
33517 and ultimately in a Machine Check interrupt. The data would
33518 be inaccessible to the CPU.
33521 Forbid any application to access the last 256 bytes of DDR
33522 memory. For example, make your operating system believe that
33523 the last 256 bytes of DDR memory are absent. AMCC has a patch
33524 that does this, available for Linux.
33526 This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
33527 lwmon5, korat, sequoia
33529 The other remaining 440EPx board were intentionally not included
33530 since it is not clear to me, if they use the end of ram for some
33531 other purpose. This is unclear, since these boards have CONFIG_PRAM
33532 defined and even comments like this:
33535 /* esd expects pram at end of physical memory.
33536 * So no logbuffer at the moment.
33539 It is strongly recommended to not use the last 256 bytes on those
33540 boards too. Patches from the board maintainers are welcome.
33542 Signed-off-by: Stefan Roese <sr@denx.de>
33544 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
33545 Author: Stefan Roese <sr@denx.de>
33546 Date: Thu Mar 27 10:09:05 2008 +0100
33548 ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
33550 Signed-off-by: Stefan Roese <sr@denx.de>
33552 commit d56a3ce179688cde61073a3690e21703d68fafd7
33553 Author: Stefan Roese <sr@denx.de>
33554 Date: Tue Mar 25 17:51:13 2008 +0100
33556 ppc4xx: Correctly pass phyiscal FLASH base address into dtb
33558 The routine ft_board_setup() configures the EBC NOR mappings for the
33559 Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
33560 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
33561 problem, we need to pass the corrected address here too.
33563 Signed-off-by: Stefan Roese <sr@denx.de>
33565 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
33566 Author: Stefan Roese <sr@denx.de>
33567 Date: Wed Mar 19 16:35:12 2008 +0100
33569 ppc4xx: Fix compilation warning in 4xx_enet.c
33571 Signed-off-by: Stefan Roese <sr@denx.de>
33573 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
33574 Author: Stefan Roese <sr@denx.de>
33575 Date: Wed Mar 19 16:20:49 2008 +0100
33577 ppc4xx: Add AMCC Glacier 406GT eval board support
33579 This patch adds support for the AMCC Glacier 460GT eval board.
33580 The main difference to the Canyonlands board are listed here:
33582 - 4 ethernet ports instead of 2
33586 Currently EMAC2+3 are not working. This will be fixed in a later
33589 Signed-off-by: Stefan Roese <sr@denx.de>
33591 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
33592 Author: Stefan Roese <sr@denx.de>
33593 Date: Thu Mar 27 08:47:26 2008 +0100
33595 ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
33597 Signed-off-by: Stefan Roese <sr@denx.de>
33599 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
33600 Author: Anatolij Gustschin <agust@denx.de>
33601 Date: Wed Mar 26 21:05:43 2008 +0100
33603 Fix out of tree building issue
33605 Currently U-Boot building in some external directory
33606 doesn't work. This patch tries to fix the problem.
33608 Signed-off-by: Anatolij Gustschin <agust@denx.de>
33610 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
33611 Author: Anatolij Gustschin <agust@denx.de>
33612 Date: Wed Mar 26 18:13:33 2008 +0100
33614 README: update documentation (availability, links, etc.)
33618 Signed-off-by: Anatolij Gustschin <agust@denx.de>
33620 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
33621 Author: Anatolij Gustschin <agust@denx.de>
33622 Date: Wed Mar 26 17:47:44 2008 +0100
33624 Fix compilation error in cmd_usb.c
33626 This patch fixes compilation error
33627 cmd_usb.c: In function 'do_usb':
33628 cmd_usb.c:552: error: void value not ignored as it ought to be
33630 Signed-off-by: Anatolij Gustschin <agust@denx.de>
33632 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
33633 Author: Timur Tabi <timur@freescale.com>
33634 Date: Fri Mar 14 17:45:29 2008 -0500
33636 Add support for setting the I2C bus speed in fsl_i2c.c
33638 Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
33639 the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
33640 but fsl_i2c.c ignores it and uses conservative value when programming the
33643 Signed-off-by: Timur Tabi <timur@freescale.com>
33644 Acked-by: Andy Fleming <afleming@freescale.com>
33646 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
33647 Author: Wolfgang Denk <wd@denx.de>
33648 Date: Thu Mar 27 00:03:57 2008 +0100
33650 Coding style cleanup, update CHANGELOG
33652 Signed-off-by: Wolfgang Denk <wd@denx.de>
33654 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
33655 Author: Dave Liu <r63238@freescale.com>
33656 Date: Wed Mar 26 22:55:32 2008 +0800
33658 drivers: add the support for Freescale SATA controller
33660 Add the Freescale on-chip SATA controller driver to u-boot,
33661 The SATA controller is used on the 837x and 8315 targets,
33662 The driver can be used to load kernel, fs and dtb.
33665 - 1.5/3 Gbps link speed
33666 - LBA48, LBA28 support
33667 - DMA and FPDMA support
33668 - Two ports support
33670 Signed-off-by: Dave Liu <daveliu@freescale.com>
33672 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
33673 Author: Dave Liu <r63238@freescale.com>
33674 Date: Wed Mar 26 22:54:44 2008 +0800
33676 ata: add the readme for SATA command line
33678 Signed-off-by: Dave Liu <daveliu@freescale.com>
33680 commit cd54081cd479e542fc399b8a40651ff11a1ad849
33681 Author: Dave Liu <r63238@freescale.com>
33682 Date: Wed Mar 26 22:53:24 2008 +0800
33684 ata: enable the sata initialize on boot up
33686 Signed-off-by: Dave Liu <daveliu@freescale.com>
33688 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
33689 Author: Dave Liu <r63238@freescale.com>
33690 Date: Wed Mar 26 22:52:36 2008 +0800
33692 ata: add the fis struct for SATA
33694 Signed-off-by: Dave Liu <daveliu@freescale.com>
33696 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
33697 Author: Dave Liu <r63238@freescale.com>
33698 Date: Wed Mar 26 22:51:44 2008 +0800
33700 ata: add the libata support
33702 add simple libata support in u-boot
33704 Signed-off-by: Dave Liu <daveliu@freescale.com>
33706 commit 8e9bb43429e50df55fa41932cbe65841ff579220
33707 Author: Dave Liu <r63238@freescale.com>
33708 Date: Wed Mar 26 22:50:45 2008 +0800
33710 ata: make the ata_piix driver using new SATA framework
33712 original ata_piix driver is using IDE framework, not real
33713 SATA framework. For now, the ata_piix driver is only used
33714 by x86 sc520_cdp board. This patch makes the ata_piix driver
33715 use the new SATA framework, so
33717 - remove the duplicated command stuff
33718 - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
33719 - add the CONFIG_CMD_SATA define to sc520_cdp.h
33721 Signed-off-by: Dave Liu <daveliu@freescale.com>
33723 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
33724 Author: Dave Liu <r63238@freescale.com>
33725 Date: Wed Mar 26 22:49:44 2008 +0800
33727 ata: add the support for SATA framework
33729 - add the SATA framework
33730 - add the SATA command line
33732 Signed-off-by: Dave Liu <daveliu@freescale.com>
33734 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
33735 Author: Dave Liu <r63238@freescale.com>
33736 Date: Wed Mar 26 22:48:18 2008 +0800
33738 ata: merge the header of ata_piix driver
33740 move the sata.h from include/ to drivers/block/ata_piix.h
33742 Signed-off-by: Dave Liu <daveliu@freescale.com>
33744 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
33745 Author: Dave Liu <r63238@freescale.com>
33746 Date: Wed Mar 26 22:47:06 2008 +0800
33748 ata: merge the ata_piix driver
33750 move the cmd_sata.c from common/ to drivers/ata_piix.c,
33751 the cmd_sata.c have some part of ata_piix controller drivers.
33752 consolidate the driver to have better framework.
33754 Signed-off-by: Dave Liu <daveliu@freescale.com>
33756 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
33757 Author: Markus Klotzbuecher <mk@denx.de>
33758 Date: Wed Mar 26 18:26:43 2008 +0100
33760 USB, Storage: fix a bug introduced in commit
33761 f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
33762 to only print only information on one storage device, but not for
33765 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
33767 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
33768 Author: Anatolij Gustschin <agust@denx.de>
33769 Date: Wed Mar 26 17:47:44 2008 +0100
33771 Fix compilation error in cmd_usb.c
33773 This patch fixes compilation error
33774 cmd_usb.c: In function 'do_usb':
33775 cmd_usb.c:552: error: void value not ignored as it ought to be
33777 Signed-off-by: Anatolij Gustschin <agust@denx.de>
33778 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
33780 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
33781 Author: Kumar Gala <galak@kernel.crashing.org>
33782 Date: Wed Mar 26 08:53:53 2008 -0500
33784 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
33786 Provide a board_lmb_reserve helper function to ensure we reserve
33787 the page of memory we are using for the boot page translation code.
33789 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33791 commit 79679d80021ab095e639e250ca472fe526da02e2
33792 Author: Kumar Gala <galak@kernel.crashing.org>
33793 Date: Wed Mar 26 08:34:25 2008 -0500
33795 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
33797 The following changes are needed to be inline with ePAPR v0.81:
33799 * r4, r5 and now always set to 0 on boot release
33800 * r7 is used to pass the size of the initial map area (IMA)
33801 * EPAPR_MAGIC value changed for book-e processors
33802 * changes in the spin table layout
33803 * spin table supports a 64-bit physical release address
33805 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33807 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
33808 Author: Jon Loeliger <jdl@freescale.com>
33809 Date: Wed Mar 19 15:02:07 2008 -0500
33811 FSL: Clean up board/freescale/common/Makefile
33813 Each file that can be built here now follows some
33814 CONFIG_ option so that they are appropriately built
33815 or not, as needed. And CONFIG_ defines were added
33816 to various board config files to make sure that happens.
33818 The other board/freescale/*/Makefiles no longer need
33819 to reach up and over into ../common to build their
33820 individually needed files any more.
33822 Boards that are CDS specific were renamed with cds_ prefix.
33824 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33826 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
33827 Author: Kumar Gala <galak@kernel.crashing.org>
33828 Date: Wed Feb 27 22:00:27 2008 -0600
33830 85xx: Fix merge duplication
33832 ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
33834 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33836 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
33837 Author: James Yang <James.Yang@freescale.com>
33838 Date: Tue Feb 12 16:35:07 2008 -0600
33840 85xx: Expand CCSR space with more DDR controller registers.
33842 Signed-off-by: James Yang <James.Yang@freescale.com>
33843 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33844 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33846 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
33847 Author: James Yang <James.Yang@freescale.com>
33848 Date: Fri Feb 8 18:05:08 2008 -0600
33850 85xx: Speed up get_ddr_freq() and get_bus_freq()
33852 get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
33853 called. However, get_sys_info() recalculates extraneous information when
33854 called each time. Have get_ddr_freq() and get_bus_freq() return memoized
33855 values from global_data instead.
33857 Signed-off-by: James Yang <James.Yang@freescale.com>
33858 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33860 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
33861 Author: James Yang <James.Yang@freescale.com>
33862 Date: Fri Feb 8 16:46:27 2008 -0600
33864 85xx: Show DDR memory data rate in addition to the memory clock frequency.
33866 Show the DDR memory data rate in addition to the memory clock
33867 frequency. For DDR/DDR2 memories the memory data rate is 2x the
33870 Signed-off-by: James Yang <James.Yang@freescale.com>
33871 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33873 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
33874 Author: James Yang <James.Yang@freescale.com>
33875 Date: Fri Feb 8 16:44:53 2008 -0600
33877 85xx: get_tbclk() speed up and rounding fix
33879 Speed up get_tbclk() by referencing pre-computed bus clock
33880 frequency value from global data instead of sys_info_t. Fix
33881 rounding of result to nearest; previously it was rounding
33884 Signed-off-by: James Yang <James.Yang@freescale.com>
33885 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33887 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
33888 Author: Andy Fleming <afleming@freescale.com>
33889 Date: Wed Feb 6 01:19:40 2008 -0600
33891 Update SVR numbers to expand support
33893 FSL has taken to using SVR[16:23] as an SOC sub-version field. This
33894 is used to distinguish certain variants within an SOC family. To
33895 account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
33896 constants to reflect the larger value. We also add SVR numbers for all
33897 of the current variants. Finally, to make things neater, rather than
33898 use an enormous switch statement to print out the CPU type, we create
33899 and array of SVR/name pairs (using a macro), and print out the CPU name
33900 that matches the SVR SOC version.
33902 Signed-off-by: Andy Fleming <afleming@freescale.com>
33904 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
33905 Author: Andy Fleming <afleming@freescale.com>
33906 Date: Wed Feb 6 01:12:57 2008 -0600
33908 Add the Freescale PCI device IDs
33910 Signed-off-by: Andy Fleming <afleming@freescale.com>
33912 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
33913 Author: Kumar Gala <galak@kernel.crashing.org>
33914 Date: Thu Feb 14 11:04:23 2008 -0600
33916 85xx: Added support for multicore boot mechanism
33918 Added the cpu command that provides a generic mechanism to get status,
33919 reset, and release secondary cores in multicore processors.
33921 Added support for using the ePAPR defined spin-table mechanism on 85xx.
33923 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33924 Signed-off-by: Andy Fleming <afleming@freescale.com>
33926 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
33927 Author: Kumar Gala <galak@kernel.crashing.org>
33928 Date: Thu Jan 17 16:48:33 2008 -0600
33930 85xx: Added support for multicore boot mechanism
33932 Added the cpu command that provides a generic mechanism to get status,
33933 reset, and release secondary cores in multicore processors.
33935 Added support for using the ePAPR defined spin-table mechanism on 85xx.
33937 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33939 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
33940 Author: Kumar Gala <galak@kernel.crashing.org>
33941 Date: Wed Jan 30 14:55:14 2008 -0600
33943 85xx: Add the concept of CFG_CCSRBAR_PHYS
33945 When we go to 36-bit physical addresses we need to keep the concept of
33946 the physical CCSRBAR address seperate from the virtual one.
33948 For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
33950 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33952 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
33953 Author: Wolfgang Denk <wd@denx.de>
33954 Date: Wed Mar 26 15:38:47 2008 +0100
33956 Coding style cleanup.
33958 Signed-off-by: Wolfgang Denk <wd@denx.de>
33960 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
33961 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
33962 Date: Wed Mar 26 13:02:13 2008 +0100
33964 Add CFG_RTC_DS1337_NOOSC to turn off OSC output
33966 The default settings for RTC DS1337 keeps the OSC
33967 output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
33970 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
33972 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
33973 Author: Wolfgang Denk <wd@denx.de>
33974 Date: Wed Mar 26 11:48:46 2008 +0100
33976 Cleanup coding style, update CHANGELOG
33978 Signed-off-by: Wolfgang Denk <wd@denx.de>
33980 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
33981 Author: Wolfgang Denk <wd@denx.de>
33982 Date: Wed Mar 26 10:40:12 2008 +0100
33984 README: update documentation (availability, links, etc.)
33986 Signed-off-by: Wolfgang Denk <wd@denx.de>
33988 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
33989 Author: Aras Vaichas <arasv@magtech.com.au>
33990 Date: Tue Mar 25 12:09:07 2008 +1100
33992 USB Storage, add meaningful return value
33994 This patch changes the "usb storage" command to return success if it
33995 finds a USB storage device, otherwise it returns error.
33997 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
33999 commit 18e69a35efbb078403db0c0063986470dad7d082
34000 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34001 Date: Fri Mar 14 23:20:18 2008 +0300
34003 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
34005 Linux understands "host" (default), "peripheral" and "otg" (broken).
34006 Though, U-Boot doesn't restrict dr_mode variable to these values (think
34007 of renames in future).
34009 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34010 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34012 commit c7604783b236e368f225efb7b3efb418fe20b404
34013 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34014 Date: Fri Mar 14 23:20:30 2008 +0300
34016 tsec: fix link detection for the RTL8211B PHY
34018 RTL8211B sets link state register after autonegotiation complete,
34019 so with bootdelay=0 RTL8211B will report lack of the link.
34021 To fix this, we should wait for aneg to complete, even if the
34022 link is currently down.
34024 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34025 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34027 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
34028 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34029 Date: Mon Mar 24 20:47:09 2008 +0300
34031 mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
34033 device_type = "soc" is being deprecated, newer device trees will use
34034 "fsl,soc" and/or "fsl,immr" for the soc nodes.
34036 This patch also adds clock-frequency property for soc nodes (the same
34037 value as bus-frequency).
34039 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34041 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
34042 Author: Joe D'Abbraccio <ljd015@freescale.com>
34043 Date: Mon Mar 24 13:00:59 2008 -0400
34045 Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
34047 With the original value of 1/2 clock cycle delay, the system ran relatively
34048 stable except when we run benchmarks that are intensive users of memory.
34049 When I run samba connected disk with a HDBENCH test, the system locks-up
34050 or reboots sporadically.
34052 Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
34054 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
34055 Author: Scott Wood <scottwood@freescale.com>
34056 Date: Mon Mar 24 12:44:13 2008 -0500
34058 mpc83xx: Set PCI I/O bus-address base to zero.
34060 The device trees for these boards describe PCI I/O as starting from
34061 address zero from the device's perspective.
34063 Placing I/O elsewhere may cause problems with certain PCI boards, and may
34064 cause problems with Linux.
34066 Signed-off-by: Scott Wood <scottwood@freescale.com>
34068 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
34069 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34070 Date: Mon Mar 24 20:47:05 2008 +0300
34072 mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
34074 At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
34075 This patch fixes "system time drifting" problem.
34077 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34079 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
34080 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34081 Date: Mon Mar 24 20:47:02 2008 +0300
34083 mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
34085 This is needed to update /choosen/linux,stdout-path properly.
34087 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34089 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
34090 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34091 Date: Mon Mar 24 20:47:00 2008 +0300
34093 mpc83xx: MPC8360E-RDK: add dhcp command
34095 Plus modify environment to use it and remove bootfile env variable,
34096 it is internal and CONFIG_BOOTFILE is used for these purposes.
34098 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34100 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
34101 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34102 Date: Mon Mar 24 20:46:57 2008 +0300
34104 mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
34106 Current DDR setup easily causes memory corruption, this patch fixes it.
34108 Also fix TIMING_CFG0_MRS_CYC definition.
34110 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34112 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
34113 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34114 Date: Mon Mar 24 20:46:53 2008 +0300
34116 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
34118 This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
34119 controller and FHCI (QE USB).
34121 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34123 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
34124 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34125 Date: Mon Mar 24 20:46:51 2008 +0300
34127 mpc83xx: MPC8360E-RDK: add support for NAND
34129 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34131 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
34132 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34133 Date: Mon Mar 24 20:46:46 2008 +0300
34135 mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
34137 This is needed for BCM PHYs to work on this board.
34139 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34141 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
34142 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34143 Date: Mon Mar 24 20:46:34 2008 +0300
34145 uec: add support for Broadcom BCM5481 Gigabit PHY
34147 This patch adds basic support for Broadcom BCM5481 PHY.
34149 RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
34150 Peter Barada <peterb@logicpd.com>.
34152 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34154 commit 6a600c3a1876bc203445df4f0fd6b12648259666
34155 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34156 Date: Mon Mar 24 20:46:28 2008 +0300
34158 uec: add support for RGMII_RXID interface mode
34160 PHY drivers will use it to setup software delay between RXD and RXC
34163 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34165 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
34166 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34167 Date: Mon Mar 24 20:46:24 2008 +0300
34169 uec: add support for gbit mii status readings
34171 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34173 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
34174 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34175 Date: Mon Mar 24 17:40:47 2008 +0300
34177 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
34179 This is primarily for the early console support.
34181 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34183 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
34184 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34185 Date: Mon Mar 24 17:40:43 2008 +0300
34187 83xx: initialize serdes for MPC837XRDB boards
34189 On the MPC8377ERDB: 2 SATA and 2 PCI-E.
34190 On the MPC8378ERDB: 2 PCI-E
34191 On the MPC8379ERDB: 4 SATA
34193 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34195 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
34196 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34197 Date: Mon Mar 24 17:40:32 2008 +0300
34199 83xx: serdes setup routines
34201 This patch adds few routines to configure serdes on 837x targets.
34203 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34205 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
34206 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34207 Date: Mon Mar 24 17:40:27 2008 +0300
34209 83xx: split COBJS onto separate lines
34211 ..plus get rid of some #ifdefs in the .c files.
34213 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34215 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
34216 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
34217 Date: Mon Mar 24 17:40:23 2008 +0300
34219 83xx: nand support for MPC837XRDB boards
34221 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
34223 commit 82e45a204190593e8613145a928f998fb8c909c4
34224 Author: Jerry Van Baren <gvb.uboot@gmail.com>
34225 Date: Tue Mar 18 21:44:41 2008 -0400
34227 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
34229 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
34230 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34232 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
34233 Author: Michael Barkowski <michael.barkowski@freescale.com>
34234 Date: Thu Mar 20 13:15:39 2008 -0400
34236 mpc8323erdb: remove RTC and add EEPROM
34238 There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
34240 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
34241 Acked-by: Kim Phillips <kim.phillips@freescale.com>
34243 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
34244 Author: Michael Barkowski <michael.barkowski@freescale.com>
34245 Date: Thu Mar 20 13:15:34 2008 -0400
34247 mpc8323erdb: Improve the system performance
34249 The following changes are based on kernel UCC ethernet performance:
34251 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
34252 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
34253 switch to enable this setting.
34255 The following changes are based on the App Note AN3369 and
34256 verified to improve memory latency using LMbench:
34258 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
34259 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
34261 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
34262 Twr=15ns, and this was already the setting in DDR_MODE)
34263 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
34265 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
34267 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
34269 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
34271 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
34273 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
34276 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
34277 Acked-by: Kim Phillips <kim.phillips@freescale.com>
34279 commit fc549c871f43933396a5b3e21d897023d4b31b8d
34280 Author: Michael Barkowski <michael.barkowski@freescale.com>
34281 Date: Thu Mar 20 13:15:28 2008 -0400
34283 mpc8323erdb: use readable DDR config macros
34285 Use available shift/mask macros to define DDR configuration.
34287 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
34288 Acked-by: Kim Phillips <kim.phillips@freescale.com>
34290 commit 89c7784ed90ba50301eec521144f95111e472906
34291 Author: Timur Tabi <timur@freescale.com>
34292 Date: Fri Feb 8 13:15:55 2008 -0600
34294 83xx: Add Vitesse VSC7385 firmware uploading
34296 Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
34297 the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
34298 Cleaned up the board header files to make selecting the VSC7385 easier to
34301 Signed-off-by: Timur Tabi <timur@freescale.com>
34302 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
34304 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
34305 Author: Timur Tabi <timur@freescale.com>
34306 Date: Fri Feb 8 13:15:54 2008 -0600
34308 NET: Add Vitesse VSC7385 firmware uploading
34310 The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
34311 and other boards. A small firwmare must be uploaded to its on-board memory
34312 before it can be enabled. This patch adds the code which uploads firmware
34313 (but not the firmware itself).
34315 Previously, this feature was provided by a U-Boot application that was
34316 made available only on Freescale BSPs. The VSC7385 firmware must still
34317 be obtained separately, but at least there is no longer a need for a separate
34320 Signed-off-by: Timur Tabi <timur@freescale.com>
34321 Acked-by: Ben Warren <biggerbadderben@gmail.com>
34323 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
34324 Author: Wolfgang Denk <wd@denx.de>
34325 Date: Wed Mar 26 00:52:10 2008 +0100
34327 Coding Style cleanyp; update CHANGELOG
34329 Signed-off-by: Wolfgang Denk <wd@denx.de>
34331 commit 43ddd9c820fec44816188f53346b464e20b3142d
34332 Author: Jerry Van Baren <gvb.uboot@gmail.com>
34333 Date: Sat Mar 22 14:23:49 2008 -0400
34335 Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
34337 These defines embedded the u-boot env variables and/or the bd_t structure
34338 in the fdt blob. The conclusion of discussion on the u-boot email list
34339 was that embedding these in the fdt blob is not useful: there are better
34340 ways of passing the data (in fact, the fdt blob itself replaces the
34343 The only board that enables these is the stxxtc and they don't appear
34344 to be used by linux.
34346 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
34347 Acked-by: Kim Phillips <kim.phillips@freescale.com>
34349 commit 22ed2285743359fd1fe73e411dff914b2256e68f
34350 Author: Stefan Roese <sr@denx.de>
34351 Date: Mon Mar 17 10:49:25 2008 +0100
34353 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
34355 Signed-off-by: Stefan Roese <sr@denx.de>
34357 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
34358 Author: Kyungmin Park <kmpark@infradead.org>
34359 Date: Mon Mar 17 08:54:06 2008 +0900
34361 Add Flex-OneNAND booting support
34363 Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
34364 using a NOR Flash interface. This on-chip integration enables system designers
34365 to reduce external system logic and use high-density NAND Flash
34366 in applications that would otherwise have to use more NOR components.
34368 Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
34369 in more flexible way. While MLC area of Flex-OneNAND can be used to store data
34370 that require low reliability and high density, SLC area of Flex-OneNAND
34371 to store data that need high reliability and high performance. Flex-OneNAND
34372 can let users take advantage of storing these two different types of data
34373 into one chip, which is making Flex-OneNAND more cost- and space-effective.
34375 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
34377 commit c512389cc4a10253249271ff6c887c6dab1f0db2
34378 Author: André Schwarz <andre.schwarz@matrix-vision.de>
34379 Date: Thu Mar 13 13:50:52 2008 +0100
34381 MPC5200: support setup without FEC
34383 Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
34384 defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
34386 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
34387 Acked-by: Grant Likely <grant.likely@secretlab.ca>
34389 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
34390 Author: Jon Loeliger <jdl@freescale.com>
34391 Date: Wed Mar 5 18:05:46 2008 -0600
34393 FSL: Move board/mpc8266ads under board/freescale
34395 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34397 commit 7f1d846e5c5754449c286587d099d85246062772
34398 Author: Jon Loeliger <jdl@freescale.com>
34399 Date: Wed Mar 5 18:05:47 2008 -0600
34401 FSL: Move board/mpc7448hpc2 under board/freescale
34403 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34405 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
34406 Author: Jon Loeliger <jdl@freescale.com>
34407 Date: Wed Mar 5 18:05:45 2008 -0600
34409 FSL: Move board/mpc8260ads under board/freescale
34411 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34413 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
34414 Author: goda.yusuke <goda.yusuke@renesas.com>
34415 Date: Wed Mar 5 17:08:33 2008 +0900
34417 net: Add support AX88796L ethernet device
34419 AX88796L is device of NE2000 compatible.
34420 This patch support AX88796L ethernet device.
34422 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
34423 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34425 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
34426 Author: Wolfgang Denk <wd@denx.de>
34427 Date: Tue Mar 25 22:50:41 2008 +0100
34429 ne2000 driver: change #ifdef to Makefile conditional compilation
34431 Signed-off-by: Wolfgang Denk <wd@denx.de>
34433 commit e710185aae90c64d39c2d453e40e58ceefe4f250
34434 Author: goda.yusuke <goda.yusuke@renesas.com>
34435 Date: Wed Mar 5 17:08:20 2008 +0900
34437 net: Divided code of NE2000 ethernet driver
34439 There are more devices of the NE2000 base.
34440 A present code is difficult for us to support more devices.
34441 To support more NE2000 clone devices, separated the function.
34443 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
34444 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34446 commit 395bce4f59a507a60a475f7ee46bed47de9482df
34447 Author: Mike Frysinger <vapier@gentoo.org>
34448 Date: Sun Feb 24 23:58:13 2008 -0500
34450 net/Blackfin: move on-chip MAC driver into drivers/net/
34452 The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
34453 directory, but it is not board specific, so relocate it to the drivers dir
34454 so that other Blackfin ports can utilize it.
34456 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34458 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
34459 Author: Mike Frysinger <vapier@gentoo.org>
34460 Date: Sun Feb 24 23:52:35 2008 -0500
34462 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
34464 Since the "ssync" instruction may have hardware anomalies associated with
34465 it, have the smc91111 driver use the SSYNC macro rather than invoking it
34466 directly. We workaround all the anomalies via this macro.
34468 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
34470 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
34471 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
34472 Date: Sun Feb 17 22:57:47 2008 +0000
34474 8xx: Update OF support on 8xx
34476 This patch does some shifting around of OF support on 8xx.
34478 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
34480 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
34481 Author: Kumar Gala <galak@kernel.crashing.org>
34482 Date: Fri Feb 15 15:16:18 2008 -0600
34484 ppc: Allow boards to specify how much memory they can map
34486 For historical reasons we limited the stack to 256M because some boards
34487 could only map that much via BATS. However newer boards are capable of
34488 mapping more memory (for example 85xx is capble of doing up to 2G).
34490 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34492 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
34493 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
34494 Date: Fri Feb 15 01:05:58 2008 +0000
34496 8xx : Add OF support to Adder875 board port - resubmit
34498 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
34500 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
34501 Author: Kumar Gala <galak@kernel.crashing.org>
34502 Date: Thu Feb 14 20:44:42 2008 -0600
34504 Add setexpr command
34506 Add a simple expr style command that will set an env variable as the result
34507 of the command. This allows us to do simple math in shell. The following
34508 operations are supported: &, |, ^, +, -, *, /.
34510 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34512 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
34513 Author: Jon Loeliger <jdl@freescale.com>
34514 Date: Wed Mar 5 17:27:48 2008 -0600
34516 FSL: Move board/mpc7448hpc2 under board/freescale
34518 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34520 commit 449c703374a8868453425e15da7e2f76221b72e4
34521 Author: Jon Loeliger <jdl@freescale.com>
34522 Date: Wed Mar 5 17:21:43 2008 -0600
34524 FSL: Move board/mpc8266ads under board/freescale
34526 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34528 commit 5863577989ad689427bb750107e9a75f1c1645d2
34529 Author: Jon Loeliger <jdl@freescale.com>
34530 Date: Wed Mar 5 16:41:41 2008 -0600
34532 FSL: Move board/mpc8260ads under board/freescale
34534 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34536 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
34537 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34538 Date: Tue Mar 25 21:30:08 2008 +0900
34540 [MIPS] Move gth2_config from ARM section to MIPS
34542 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34544 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
34545 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34546 Date: Tue Mar 25 21:30:07 2008 +0900
34548 [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
34550 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34552 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
34553 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34554 Date: Tue Mar 25 21:30:07 2008 +0900
34556 [MIPS] Fix dcache_status()
34558 You can't judge UNCACHED by Config.K0 LSB.
34560 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34562 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
34563 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34564 Date: Tue Mar 25 21:30:07 2008 +0900
34566 [MIPS] Introduce _machine_restart
34568 Handles machine specific functions by using weak functions.
34570 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34572 commit decaba6f5cf386d569ac3997bebb871b966c6b18
34573 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34574 Date: Tue Mar 25 21:30:07 2008 +0900
34576 [MIPS] Cleanup CP0 Status initialization
34578 Add setup_c0_status from Linux. For the moment we disable interrupts, set
34579 CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
34580 reset-time configuration and will work well across most processors.
34582 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34584 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
34585 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34586 Date: Tue Mar 25 21:30:07 2008 +0900
34588 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
34590 Without this change, we'll be suffering from deffered WATCH exception
34591 once Status.EXL is cleared. Make sure Cause.WP is cleared.
34593 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34595 commit 26138623230ca2bad3c78e05a65527ea70c8b688
34596 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34597 Date: Tue Mar 25 21:30:07 2008 +0900
34599 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
34601 Move things to appropriate place.
34603 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34605 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
34606 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34607 Date: Tue Mar 25 21:30:06 2008 +0900
34609 [MIPS] Implement flush_cache()
34611 We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
34612 don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
34613 function is used not only in U-Boot specfic programs but also at loading
34616 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34618 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
34619 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34620 Date: Tue Mar 25 21:30:06 2008 +0900
34622 [MIPS] Fix I-/D-cache initialization loops
34624 Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
34625 again per a loop for I-cache initialization. But according to 'See MIPS
34626 Run', we're encouraged to use three separate loops rather than combining
34627 them *for both I- and D-cache*. This patch tries to fix this.
34629 In accordance with fixing above, mips_init_[id]cache are separated from
34630 mips_cache_reset(), and rewrite cache loops are completely rewritten with
34633 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34635 commit 1898840797c7f50799377bd5b285a8a93a82c419
34636 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34637 Date: Tue Mar 25 21:30:06 2008 +0900
34639 [MIPS] Replace memory clearance code with f_fill64
34641 This routine fills memory with zero by 64 bytes, and is 64-bit capable.
34643 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34645 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
34646 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34647 Date: Tue Mar 25 21:30:06 2008 +0900
34649 [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
34651 This patch replaces the current function definitions with NESTED, LEAF
34652 and END macro. They specify some more additional information about the
34653 function; an alignment of symbol, type of symbol, stack frame usage, etc.
34654 These information explicitly tells the assembler and the debugger about
34655 the types of code we want to generate.
34657 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34659 commit 282223a607c611425fa33f5428f8eae6636972bb
34660 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34661 Date: Tue Mar 25 11:43:17 2008 +0900
34663 [MIPS] asm headers' updates
34665 Make some asm headers adjusted to the latest Linux kernel.
34667 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34669 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
34670 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34671 Date: Tue Mar 25 11:39:29 2008 +0900
34673 [MIPS] Request for the 'mips_cache_lock()' removal
34675 The initial intension of having mips_cache_lock() was to use the cache
34676 as memory for temporary stack use so that a C environment can be set up
34677 as early as possible.
34679 But now mips_cache_lock() follow lowlevel_init(). We've already have the
34680 real memory initilaized at this point, therefore we could/should use it.
34681 No reason to lock at all.
34685 Cache locking is not consistent across MIPS implementaions. Some imple-
34686 mentations don't support locking at all. The style of locking varies -
34687 some support per line locking, others per way, etc. Some parts use bits
34688 in status registers instead of cache ops. Current mips_cache_lock() is
34689 not necessarily general-purpose.
34691 And this is worthy of special mention; once U-Boot/MIPS locks the lines,
34692 they are never get unlocked, so the code relies on whatever gets loaded
34693 after U-Boot to re-initialize the cache and clear the locks. We're sup-
34694 posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
34695 but leave the situation as it is for a long time.
34697 For these reasons, I proposed the removal of mips_cache_lock() from the
34698 global start-up code.
34700 This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
34701 *things have changed*. If he wants the same behavior as before, he needs
34702 to have CFG_INIT_RAM_LOCK_MIPS in his config file.
34704 If we don't have any regression report through several releases, then
34705 we'll remove codes entirely.
34707 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
34708 Acked-by: Andrew Dyer <amdyer@gmail.com>
34710 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
34711 Author: Yuri Tikhonov <yur@emcraft.com>
34712 Date: Mon Mar 24 11:30:54 2008 +0100
34714 lwmon5 SYSMON POST: fix backlight control
34716 If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
34717 run on the board, then the SYSMON POST controls the display backlight
34718 (doesn't switch backlight ON if POST FAILED, and does switch the
34719 backlight ON if PASSED).
34721 If not, then the video driver controls the display backlight (just
34722 switch ON the backlight upon initialization).
34724 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
34726 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
34727 Author: Yuri Tikhonov <yur@emcraft.com>
34728 Date: Mon Mar 24 11:29:14 2008 +0100
34730 lwmon5 SYSMON POST: fix handling of negative temperatures
34732 Fix errors in the LWMON5 Sysmon POST for negative temperatures.
34734 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
34736 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
34737 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34738 Date: Fri Mar 7 16:04:25 2008 +0900
34740 pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
34742 In current source code, when the device number of PCI is 0, process PCI
34743 bridge without fail. However, when the device number is 0, it is not PCI
34744 always bridge. There are times when device of PCI allocates.
34746 When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
34749 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
34750 Acked-by: Stefan Roese <sr@denx.de>
34752 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
34753 Author: Yuri Tikhonov <yur@emcraft.com>
34754 Date: Fri Mar 21 09:18:40 2008 +0100
34756 LWMON5: fix dsPIC POST
34758 Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
34760 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
34762 commit 388b82fddc7c05596f3f615f190da0448227dc82
34763 Author: Bartlomiej Sieka <tur@semihalf.com>
34764 Date: Thu Mar 20 23:23:13 2008 +0100
34766 [new uImage] Enable new uImage support for the pcs440ep board.
34768 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34770 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
34771 Author: Bartlomiej Sieka <tur@semihalf.com>
34772 Date: Thu Mar 20 23:23:13 2008 +0100
34774 [new uImage] Do not compile new uImage format support by default
34776 Disable default building of new uImage format support in preparation
34777 for merge with the master. Support for new format can be enabled on
34778 a per-board basis, by defining the following in the board's config file:
34780 #define CONFIG_FIT 1
34781 #define CONFIG_OF_LIBFDT 1
34783 This can be optionally defined to give more verbose output:
34785 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
34787 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34789 commit dafaede8a46c7159310239e036c93e31c6374487
34790 Author: Bartlomiej Sieka <tur@semihalf.com>
34791 Date: Thu Mar 20 23:20:31 2008 +0100
34793 [new uImage] Disable debuging output in preparation for merge with master
34795 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34797 commit fbe7a155027beacebaee9b32e1ada781fe924bca
34798 Author: Bartlomiej Sieka <tur@semihalf.com>
34799 Date: Thu Mar 20 19:38:45 2008 +0100
34801 [new uImage] Compilation and new uImage handling fixes for imxtract
34803 Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
34804 include/config_cmd_default.h. Fix few warnings and handling of new format
34807 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34809 commit 36cc8cbb3379d5166f882641123521735c469f92
34810 Author: Bartlomiej Sieka <tur@semihalf.com>
34811 Date: Thu Mar 20 23:10:19 2008 +0100
34813 [new uImage] Fix autoscr command used with new uImage format
34815 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34817 commit 43142e817f0597be412e7cbe19413f5532eafa5d
34818 Author: Bartlomiej Sieka <tur@semihalf.com>
34819 Date: Thu Mar 20 23:10:19 2008 +0100
34821 [new uImage] Fix *.its files location in documentation
34823 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34825 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
34826 Author: Wolfgang Denk <wd@denx.de>
34827 Date: Thu Mar 20 22:01:38 2008 +0100
34829 lwmon5 POST: remove unreachable code
34831 plus some coding style cleanup
34833 Signed-off-by: Wolfgang Denk <wd@denx.de>
34835 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
34836 Author: Yuri Tikhonov <yur@emcraft.com>
34837 Date: Thu Mar 20 17:56:04 2008 +0300
34839 LWMON5: POST RTC fix
34841 Modify the RTC API to provide one a status for the time reported by
34842 the rtc_get() function:
34843 0 - a reliable time is guaranteed,
34844 < 0 - a reliable time isn't guaranteed (power fault, clock issues,
34847 The RTC chip drivers are responsible for providing this info if the
34848 corresponding chip supports such functionality. If not - always
34849 report that the time is reliable.
34851 The POST RTC test was modified to detect the RTC faults utilizing
34852 this new rtc_get() feature.
34854 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
34856 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
34857 Author: Martin Krause <martin.krause@tqs.de>
34858 Date: Wed Mar 19 14:25:14 2008 +0100
34860 TQM5200B: update MTD partition layout
34862 - insert partition for dtb blob to TQM5200B MTD layout
34863 - set env variables dependent on the configured board
34864 (TQM5200 or TQM5200B)
34866 Signed-off-by: Martin Krause <martin.krause@tqs.de>
34868 commit f0105727d132f56a21fa3ed8b162309cca6cac44
34869 Author: Stefan Roese <sr@denx.de>
34870 Date: Wed Mar 19 07:09:26 2008 +0100
34872 CFI: Small cleanup for FLASH_SHOW_PROGRESS
34874 With this patch we don't need that many #ifdef's in the code. It moves
34875 the subtraction into the macro and defines a NOP-macro when
34876 CONFIG_FLASH_SHOW_PROGRESS is not defined.
34878 Signed-off-by: Stefan Roese <sr@denx.de>
34879 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
34881 commit 9a042e9ca512beaaa2cb450274313fc477141241
34882 Author: Jerry Van Baren <gvb.uboot@gmail.com>
34883 Date: Sat Mar 8 13:48:01 2008 -0500
34885 Flash programming progress countdown.
34887 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
34889 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
34890 Author: Bartlomiej Sieka <tur@semihalf.com>
34891 Date: Wed Mar 19 10:00:06 2008 +0100
34893 [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
34895 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34897 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
34898 Author: David Gibson <david@gibson.dropbear.id.au>
34899 Date: Mon Feb 18 18:09:04 2008 +1100
34901 libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
34903 Since fdt_node_offset_by_compatible() was converted to the new
34904 fdt_next_node() iterator, a chunk of initialization code became
34905 redundant, but was not removed by oversight. This patch cleans it up.
34907 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
34909 commit d0ccb9b140b472039732de102fc14597eedb14df
34910 Author: David Gibson <david@gibson.dropbear.id.au>
34911 Date: Mon Feb 18 18:06:31 2008 +1100
34913 libfdt: Trivial cleanup for CHECK_HEADER)
34915 Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
34916 However, there are a handful of functions (fdt_move, rw_check_header,
34917 fdt_open_into) from other files which could also use it (currently
34918 they open-code something more-or-less identical). Therefore, this
34919 patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
34922 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
34924 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
34925 Author: Kumar Gala <galak@kernel.crashing.org>
34926 Date: Wed Feb 20 14:32:36 2008 -0600
34928 Fix fdt boardsetup command parsing
34930 The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
34932 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34934 commit 804887e6001e2f00bea11431bf34d6d472512cda
34935 Author: Kumar Gala <galak@kernel.crashing.org>
34936 Date: Fri Feb 15 03:34:36 2008 -0600
34938 Add sub-commands to fdt
34940 fdt header - Display header info
34941 fdt bootcpu <id> - Set boot cpuid
34942 fdt memory <addr> <size> - Add/Update memory node
34943 fdt rsvmem print - Show current mem reserves
34944 fdt rsvmem add <addr> <size> - Add a mem reserve
34945 fdt rsvmem delete <index> - Delete a mem reserves
34947 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
34949 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
34950 Author: David Gibson <david@gibson.dropbear.id.au>
34951 Date: Thu Feb 14 16:50:34 2008 +1100
34953 libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
34955 fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
34956 node which has NOP tags interspersed with its properties. In this
34957 case fdt_add_subnode_namelen() will put the new subnode before the
34958 first NOP tag, even if there are properties after it, which will
34959 result in an invalid blob.
34961 This patch fixes the bug, and adds a testcase for it.
34963 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
34965 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
34966 Author: David Gibson <david@gibson.dropbear.id.au>
34967 Date: Tue Feb 12 11:58:31 2008 +1100
34969 libfdt: Add and use a node iteration helper function.
34971 This patch adds an fdt_next_node() function which can be used to
34972 iterate through nodes of the tree while keeping track of depth. This
34973 function is used to simplify the iteration code in a lot of other
34974 functions, and is also exported for use by library users.
34976 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
34978 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
34979 Author: David Gibson <david@gibson.dropbear.id.au>
34980 Date: Fri Jan 11 14:55:05 2008 +1100
34982 libfdt: Add fdt_set_name() function
34984 This patch adds an fdt_set_name() function to libfdt, mirroring
34985 fdt_get_name(). This is a r/w function which alters the name of a
34986 given device tree node.
34988 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
34990 commit 23e20aa6488e6c0622496549861bfdc74108debe
34991 Author: Yuri Tikhonov <yur@pollux.denx.de>
34992 Date: Tue Mar 18 13:33:30 2008 +0100
34994 lwmon5: Fix register test logic to match the specific GDC h/w.
34996 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
34997 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
34999 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
35000 Author: Yuri Tikhonov <yur@pollux.denx.de>
35001 Date: Tue Mar 18 13:27:57 2008 +0100
35003 Fix backlight in the lwmon5 POST.
35005 Backlight was switched on even when temperature was too low.
35007 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35008 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35010 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
35011 Author: Yuri Tikhonov <yur@pollux.denx.de>
35012 Date: Wed Feb 6 18:48:36 2008 +0100
35014 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
35016 To enable this, alternative, configuration the U-Boot board configuration
35017 file for lwmon5 includes the definitions of alternative addresses for header
35018 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
35020 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
35021 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
35022 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
35024 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35026 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
35027 Author: Yuri Tikhonov <yur@pollux.denx.de>
35028 Date: Mon Feb 4 17:11:53 2008 +0100
35030 Add support for the lwmon5 board reset via GPIO58.
35032 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35033 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35035 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
35036 Author: Yuri Tikhonov <yur@pollux.denx.de>
35037 Date: Mon Feb 4 17:09:55 2008 +0100
35039 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
35041 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35042 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35044 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
35045 Author: Yuri Tikhonov <yur@pollux.denx.de>
35046 Date: Mon Feb 4 14:11:03 2008 +0100
35048 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
35050 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35051 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35053 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
35054 Author: Yuri Tikhonov <yur@pollux.denx.de>
35055 Date: Mon Feb 4 14:10:42 2008 +0100
35057 The patch adds new POST tests for the Lwmon5 board. These are:
35059 * External Watchdog test;
35065 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35066 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35068 commit c2ed33efbfff5767bca236828e021c55fd547b6c
35069 Author: Yuri Tikhonov <yur@pollux.denx.de>
35070 Date: Mon Feb 4 14:10:01 2008 +0100
35072 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
35074 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35076 commit 3a5d1e7f1309998791702b2a559e3126781746b9
35077 Author: Yuri Tikhonov <yur@pollux.denx.de>
35078 Date: Tue Mar 18 13:33:30 2008 +0100
35080 lwmon5: Fix register test logic to match the specific GDC h/w.
35082 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35083 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35085 commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
35086 Author: Yuri Tikhonov <yur@pollux.denx.de>
35087 Date: Tue Mar 18 13:27:57 2008 +0100
35089 Fix backlight in the lwmon5 POST.
35091 Backlight was switcehd on even when temperature was too low.
35093 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35094 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35096 commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
35097 Author: Yuri Tikhonov <yur@pollux.denx.de>
35098 Date: Wed Feb 6 18:48:36 2008 +0100
35100 The patch introduces the alternative configuration of the log buffer for
35101 the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
35102 the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
35103 PPC440EPX_GPT0_COMP5).
35105 To enable this, alternative, configuration the U-Boot board configuration
35106 file for lwmon5 includes the definitions of alternative addresses for header
35107 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
35109 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
35110 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
35111 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
35113 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35115 commit ff818b21b069f4bc9cb73373cc5a16014be101b7
35116 Author: Yuri Tikhonov <yur@pollux.denx.de>
35117 Date: Mon Feb 4 17:11:53 2008 +0100
35119 Add support for the lwmon5 board reset via GPIO58.
35121 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35122 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35124 commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
35125 Author: Yuri Tikhonov <yur@pollux.denx.de>
35126 Date: Mon Feb 4 17:09:55 2008 +0100
35128 Some fixes to dspic, fpga, and gdc post tests for lwmon5.
35129 Disable external watch-dog for now.
35131 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35132 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35134 commit e262efe35742c1ad4b0966ff501efc26f34a0aec
35135 Author: Yuri Tikhonov <yur@pollux.denx.de>
35136 Date: Mon Feb 4 14:11:03 2008 +0100
35138 The patch introduces the CRITICAL feature of POST tests. If the test
35139 marked as POST_CRITICAL fails then the alternative, post_critical,
35140 boot-command is used. If this command is not defined then U-Boot
35141 enters into interactive mode.
35143 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35144 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35146 commit 65b20dcefc89618193fa51947968dada91e4c778
35147 Author: Yuri Tikhonov <yur@pollux.denx.de>
35148 Date: Mon Feb 4 14:10:42 2008 +0100
35150 The patch adds new POST tests for the Lwmon5 board.
35153 * External Watchdog test;
35159 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35160 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
35162 commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
35163 Author: Yuri Tikhonov <yur@pollux.denx.de>
35164 Date: Mon Feb 4 14:10:01 2008 +0100
35166 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
35168 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
35170 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
35171 Author: Wolfgang Denk <wd@denx.de>
35172 Date: Tue Mar 18 17:35:51 2008 +0100
35174 HMI1001: fix compile problem.
35176 Signed-off-by: Wolfgang Denk <wd@denx.de>
35178 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
35179 Author: Mike Frysinger <vapier@gentoo.org>
35180 Date: Mon Feb 18 05:32:30 2008 -0500
35182 Blackfin: BF537-stamp: drop board-specific flash driver for CFI
35184 The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
35185 for the board specific driver at all. Just use the common CFI driver.
35187 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
35189 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
35190 Author: Mike Frysinger <vapier@gentoo.org>
35191 Date: Tue Feb 19 00:36:14 2008 -0500
35193 Blackfin: add proper ELF markings to some assembly functions
35195 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
35197 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
35198 Author: Mike Frysinger <vapier@gentoo.org>
35199 Date: Tue Feb 19 00:35:17 2008 -0500
35201 Blackfin: new cplbinfo command for viewing cplb tables
35203 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
35205 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
35206 Author: Mike Frysinger <vapier@gentoo.org>
35207 Date: Mon Feb 18 05:37:51 2008 -0500
35209 Blackfin: update MAINTAINERS list
35211 Add maintainer information for the Blackfin boards.
35213 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
35215 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
35216 Author: Mike Frysinger <vapier@gentoo.org>
35217 Date: Mon Feb 18 05:26:48 2008 -0500
35219 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
35221 Stop tying things to the processor that should be tied to other defines and
35222 change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
35223 system to select the -mcpu option.
35225 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
35227 commit 86a20fb920bd198105acf7b1191117f566d637ed
35228 Author: Mike Frysinger <vapier@gentoo.org>
35229 Date: Sat Feb 16 07:40:36 2008 -0500
35231 Blackfin: move bootldr command to common code
35233 This moves the Blackfin-common bootldr command out of the BF537-STAMP
35234 specific board directory and into the common directory so that all Blackfin
35235 boards may utilize it.
35237 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
35239 commit decbe029b2a9d3333d02c433389b1c821eea96d7
35240 Author: Heiko Schocher <hs@denx.de>
35241 Date: Fri Mar 14 11:05:20 2008 +0100
35243 mgcoge: update configuration
35245 Fix configuration for mgcoge board
35247 Signed-off-by: Heiko Schocher <hs@denx.de>
35249 commit c136724cda0219c49f1d4b346f00da29b14fdf14
35250 Author: Wolfgang Denk <wd@denx.de>
35251 Date: Sun Mar 16 01:22:59 2008 +0100
35253 drivers/rtc/Makefile: keep list sorted
35255 Signed-off-by: Wolfgang Denk <wd@denx.de>
35257 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
35258 Author: Tor Krill <tor@excito.com>
35259 Date: Sat Mar 15 15:40:26 2008 +0100
35261 Add support for Intersil isl1208 RTC
35263 Signed-off-by: Tor Krill <tor@excito.com>
35265 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
35266 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35267 Date: Sat Mar 15 17:36:41 2008 +0100
35271 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35273 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
35274 Author: Wolfgang Denk <wd@denx.de>
35275 Date: Sun Mar 16 01:12:58 2008 +0100
35277 Conding style cleanup
35279 Signed-off-by: Wolfgang Denk <wd@denx.de>
35281 commit 41712b4e8c95dff23354bcd620e1f9477160c190
35282 Author: Stefan Roese <sr@denx.de>
35283 Date: Wed Mar 5 12:31:53 2008 +0100
35285 ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
35287 This patch adds USB OHCI support to the Canyonlands board port. It also
35288 enables EXT2 support.
35290 Signed-off-by: Stefan Roese <sr@denx.de>
35292 commit 2596f5b9d353ff3e4387a3325d05740f16958038
35293 Author: Stefan Roese <sr@denx.de>
35294 Date: Wed Mar 5 12:29:32 2008 +0100
35296 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
35298 This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
35299 way a board just needs to define this new option to enable the "force
35300 NoPowerSwitching mode" instead of adding new CPU/architecture defines
35301 to the USB source itself.
35303 This new option will be used first with the new AMCC 460EX Canyonlands
35304 board port, which will be posted in a few days.
35306 This patch also fixes a small compilation problem when DEBUG is enabled.
35308 Signed-off-by: Stefan Roese <sr@denx.de>
35310 commit 71665ebf88408ff2acb762af47989fd4365b321a
35311 Author: Stefan Roese <sr@denx.de>
35312 Date: Mon Mar 3 17:27:02 2008 +0100
35314 ppc4xx: Add Canyonlands NAND booting support
35316 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
35317 NAND devices. The only bootstrap option for NAND booting is option F for
35318 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
35319 EEPROM needs to be programmed accordingly.
35321 This patch adds basic NAND booting support for the AMCC Canyonlands aval
35322 board and also adds support to the "bootstrap" command, to enable NAND
35323 booting I2C setting.
35325 Tested with 512 byte page NAND device (32MByte) on Canyonlands.
35327 Signed-off-by: Stefan Roese <sr@denx.de>
35329 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
35330 Author: Stefan Roese <sr@denx.de>
35331 Date: Tue Mar 11 16:53:00 2008 +0100
35333 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
35335 This patch adds support for the AMCC Canyonlands 460EX evaluation
35338 Signed-off-by: Stefan Roese <sr@denx.de>
35340 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
35341 Author: Stefan Roese <sr@denx.de>
35342 Date: Tue Mar 11 16:52:24 2008 +0100
35344 ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
35346 This patch adds support for the AMCC Canyonlands 460EX evaluation
35349 Signed-off-by: Stefan Roese <sr@denx.de>
35351 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
35352 Author: Stefan Roese <sr@denx.de>
35353 Date: Tue Mar 11 16:51:17 2008 +0100
35355 ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
35357 This patch adds support for the AMCC Canyonlands 460EX evaluation
35360 Signed-off-by: Stefan Roese <sr@denx.de>
35362 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
35363 Author: Stefan Roese <sr@denx.de>
35364 Date: Tue Mar 11 15:11:43 2008 +0100
35366 ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
35368 This patch adds basic support for the AMCC 460EX/460GT PPC's.
35370 Signed-off-by: Stefan Roese <sr@denx.de>
35372 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
35373 Author: Stefan Roese <sr@denx.de>
35374 Date: Tue Mar 11 15:11:18 2008 +0100
35376 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
35378 This patch adds basic support for the AMCC 460EX/460GT PPC's.
35380 Signed-off-by: Stefan Roese <sr@denx.de>
35382 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
35383 Author: Stefan Roese <sr@denx.de>
35384 Date: Tue Mar 11 15:07:10 2008 +0100
35386 ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
35388 This patch adds basic support for the AMCC 460EX/460GT PPC's.
35390 Signed-off-by: Stefan Roese <sr@denx.de>
35392 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
35393 Author: Stefan Roese <sr@denx.de>
35394 Date: Tue Mar 11 15:05:50 2008 +0100
35396 ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
35398 This patch adds basic support for the AMCC 460EX/460GT PPC's.
35400 Signed-off-by: Stefan Roese <sr@denx.de>
35402 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
35403 Author: Stefan Roese <sr@denx.de>
35404 Date: Tue Mar 11 15:05:26 2008 +0100
35406 ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
35408 This patch adds basic support for the AMCC 460EX/460GT PPC's.
35410 Signed-off-by: Stefan Roese <sr@denx.de>
35412 commit 56e410178375d9f20be25fb24e180974f0ae120b
35413 Author: Stefan Roese <sr@denx.de>
35414 Date: Tue Feb 19 22:07:57 2008 +0100
35416 ppc4xx: interrupt.c reworked
35418 This patch is a rework of the 4xx interrupt handling done while
35419 adding the 460EX/GT support. Interrupts are needed on 4xx for the
35422 Signed-off-by: Stefan Roese <sr@denx.de>
35424 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
35425 Author: Stefan Roese <sr@denx.de>
35426 Date: Tue Feb 19 22:01:57 2008 +0100
35428 ppc4xx: program_tlb now uses 64bit physical addess
35430 This patch changes the physical addess parameter from 32bit to 64bit.
35431 This is needed for 36bit 4xx platforms to access areas located
35432 beyond the 4GB border, like SoC peripherals (EBC etc.).
35434 Signed-off-by: Stefan Roese <sr@denx.de>
35436 commit c3307fa186af85771924c434997089b8104c0a46
35437 Author: Stefan Roese <sr@denx.de>
35438 Date: Tue Feb 19 21:58:25 2008 +0100
35440 ppc4xx: miiphy.c reworked
35442 While adding the 460EX/GT support I reworked the 4xx miiphy code. It
35443 badly neede some cleanup.
35445 Signed-off-by: Stefan Roese <sr@denx.de>
35447 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
35448 Author: Stefan Roese <sr@denx.de>
35449 Date: Tue Feb 19 16:21:49 2008 +0100
35451 rtc: Add M41T62 support
35453 This patch add support for the STM M41T62 RTC. It is used and tested
35454 on the AMCC Canyonlands 406EX platform.
35456 Signed-off-by: Stefan Roese <sr@denx.de>
35458 commit 217d383e201adc7f2271145ae345ea5eae2b7170
35459 Author: Niklaus Giger <niklaus.giger@netstal.com>
35460 Date: Mon Feb 25 18:46:43 2008 +0100
35462 ppc4xx: Add 405GPr based MCU25 board specific files
35464 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35466 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
35467 Author: Niklaus Giger <niklaus.giger@netstal.com>
35468 Date: Mon Feb 25 18:46:42 2008 +0100
35470 ppc4xx: Add 405GPr based MCU25 board config file
35472 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35474 commit b05f35436b733a240559e77e46bed8439665ecc5
35475 Author: Niklaus Giger <niklaus.giger@netstal.com>
35476 Date: Mon Feb 25 18:46:41 2008 +0100
35478 ppc4xx: Add 405GPr based MCU25 board. Global files
35480 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35482 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
35483 Author: Niklaus Giger <niklaus.giger@netstal.com>
35484 Date: Mon Feb 25 18:37:02 2008 +0100
35486 ppc4xx: HCU4/5. remove obsolete hcu_flash.c
35488 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35490 commit a079494853cc2bfeddb26673219db0b4b2b31566
35491 Author: Niklaus Giger <niklaus.giger@netstal.com>
35492 Date: Mon Feb 25 18:37:01 2008 +0100
35494 ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
35496 Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
35497 the FLASH_CFI_LEGACY et al. config options.
35499 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
35501 commit e4170e5a50c8110f792bc37472833ae669d69951
35502 Author: Stefan Roese <sr@denx.de>
35503 Date: Tue Mar 11 13:52:25 2008 +0100
35505 ppc4xx: Fix comment in 405EX DDR2 init code
35507 Signed-off-by: Stefan Roese <sr@denx.de>
35509 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
35510 Author: Bartlomiej Sieka <tur@semihalf.com>
35511 Date: Fri Mar 14 16:22:34 2008 +0100
35513 Add MD5 support to the new uImage format
35515 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35517 commit 0ede0c383530a418cf98be9122371a86573cd0db
35518 Author: Bartlomiej Sieka <tur@semihalf.com>
35519 Date: Fri Mar 14 16:22:34 2008 +0100
35521 Add the MD5 algorithm
35523 MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
35524 calculated using the md5() function -- see include/md5.h for details.
35526 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35528 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
35529 Author: Wolfgang Denk <wd@denx.de>
35530 Date: Fri Mar 14 16:04:54 2008 +0100
35532 tools/setlocalversion: use a git-describe-ish format
35534 Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
35535 where 'nnnnn' is the number of commits since the last tag (i.e.,
35536 1.3.2-rc3). This makes it much easier to recognize "newer" versions
35537 and to see how much has been changed since the referenced tag.
35539 Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
35541 Signed-off-by: Wolfgang Denk <wd@denx.de>
35543 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
35544 Author: Wolfgang Denk <wd@denx.de>
35545 Date: Thu Mar 13 14:32:03 2008 +0100
35547 HMI1001: add support for MPC5200 Rev. B processors.
35549 Signed-off-by: Wolfgang Denk <wd@denx.de>
35551 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
35552 Author: Wolfgang Denk <wd@denx.de>
35553 Date: Thu Mar 13 14:29:49 2008 +0100
35555 TQM5200: remove dead code
35557 This board never used a MGT5100 processor.
35559 Signed-off-by: Wolfgang Denk <wd@denx.de>
35561 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
35562 Author: Marian Balakowicz <m8@semihalf.com>
35563 Date: Wed Mar 12 12:14:15 2008 +0100
35565 [new uImage] Fix build issue on ARM
35567 ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
35569 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
35571 commit 3310c549a73a949430bfda90876df7552a1dab0c
35572 Author: Marian Balakowicz <m8@semihalf.com>
35573 Date: Wed Mar 12 12:13:13 2008 +0100
35575 [new uImage] Add new uImage format documentation and examples
35577 Create doc/uImage.FIT documentation directory with the following files:
35578 - command_syntax_extensions.txt : extended command syntax description
35579 - howto.txt : short usage howto
35580 - source_file_format.txt : internal new uImage format description
35582 Add example image source files:
35587 Update README appropriately.
35589 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35590 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35592 commit 1ec73761d2e247078f4520a265d463e8b73391a2
35593 Author: Marian Balakowicz <m8@semihalf.com>
35594 Date: Wed Mar 12 10:35:52 2008 +0100
35596 [new uImage] Fix definition of common bootm_headers_t fields
35598 verify, autostart and lmb fields are used regardless of CONFIG_FIT
35599 setting, move their definitions to common section.
35601 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35603 commit 1d1cb4270edc6a99276834064069717f9782c491
35604 Author: Marian Balakowicz <m8@semihalf.com>
35605 Date: Wed Mar 12 10:35:51 2008 +0100
35607 [new uImage] Fix build problems on trab board
35609 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35611 commit f773bea8e11f4a11c388dcee956b2444203e6b65
35612 Author: Marian Balakowicz <m8@semihalf.com>
35613 Date: Wed Mar 12 10:35:46 2008 +0100
35615 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
35617 Save FIT configuration provied in the first bootm argument and use it
35618 when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
35619 arguments are not specified.
35621 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35623 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
35624 Author: Marian Balakowicz <m8@semihalf.com>
35625 Date: Wed Mar 12 10:33:01 2008 +0100
35627 [new uImage] More verbose kernel image uncompress error message
35629 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35631 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
35632 Author: Marian Balakowicz <m8@semihalf.com>
35633 Date: Wed Mar 12 10:33:01 2008 +0100
35635 [new uImage] Use show_boot_progress() for new uImage format
35637 This patch allocates a set of show_boot_progress() IDs for new uImage format
35638 and adds show_boot_progress() calls in new uImage format handling code.
35640 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35642 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
35643 Author: Marian Balakowicz <m8@semihalf.com>
35644 Date: Wed Mar 12 10:33:01 2008 +0100
35646 [new uImage] Add new uImage fromat support to fpga command
35648 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35650 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
35651 Author: Marian Balakowicz <m8@semihalf.com>
35652 Date: Wed Mar 12 10:33:01 2008 +0100
35654 [new uImage] Add new uImage format handling to other bootm related commands
35658 docboot - cmd_doc.c
35659 fdcboot - cmd_fdc.c
35660 diskboot - cmd_ide.c
35662 scsiboot - cmd_scsi.c
35663 usbboot - cmd_usb.c
35665 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35667 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
35668 Author: Marian Balakowicz <m8@semihalf.com>
35669 Date: Wed Mar 12 10:33:00 2008 +0100
35671 [new uImage] Add new uImage format support to imgextract command
35673 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35675 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
35676 Author: Marian Balakowicz <m8@semihalf.com>
35677 Date: Wed Mar 12 10:33:00 2008 +0100
35679 [new uImage] Add new uImage format support to autoscript routine
35681 autoscript() routine is updated to accept second argument, which
35682 is only used for FIT images and provides a FIT subimage unit name.
35684 autoscript() routine callers must now pass two arguments. For
35685 non-interactive use (like in cmd_load.c, cmd_net.c), new environment
35686 variable 'autoscript_uname' is introduced and used as a FIT
35687 subimage unit name source.
35689 autoscript command accepts extended syntax of the addr argument:
35690 addr:<subimg_uname>
35692 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35694 commit cd7c596e9f561dbbc17b717277438aee78cde14f
35695 Author: Marian Balakowicz <m8@semihalf.com>
35696 Date: Wed Mar 12 10:33:00 2008 +0100
35698 [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
35700 This patch updates architecture specific implementations of
35701 do_bootm_linux() adding new uImage format handling for
35702 operations like get kernel entry point address, get kernel
35703 image data start address.
35705 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35707 commit 3dfe110149311425919e6d6a14b561b4207498f1
35708 Author: Marian Balakowicz <m8@semihalf.com>
35709 Date: Wed Mar 12 10:32:59 2008 +0100
35711 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
35713 This patch adds new node offset fields to struct bootm_headers
35714 and updates bootm_headers processing code to make use of them.
35715 Saved node offsets allow to avoid repeating fit_image_get_node() calls.
35717 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35719 commit bc8ed486b125452ba3bd8344f052f437329150c5
35720 Author: Marian Balakowicz <m8@semihalf.com>
35721 Date: Wed Mar 12 10:32:53 2008 +0100
35723 [new uImage] ppc: Add new uImage format support to FDT handling routines
35725 Support for new (FIT) format uImages is added to powerpc specific
35726 boot_get_fdt() routine which now recognizes, sanity checks FIT image
35727 and is able to access data sections of the requested component image.
35729 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35731 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
35732 Author: Marian Balakowicz <m8@semihalf.com>
35733 Date: Wed Mar 12 10:14:57 2008 +0100
35735 [new uImage] Re-enable interrupts for non automatic booting
35737 Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
35738 environment variable is not set to 'yes'.
35740 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35742 commit d985c8498c4e47095820da97aa722381d39172c5
35743 Author: Marian Balakowicz <m8@semihalf.com>
35744 Date: Wed Mar 12 10:14:38 2008 +0100
35746 [new uImage] Remove unnecessary arguments passed to ramdisk routines
35748 boot_get_ramdisk() and image_get_ramdisk() do not need all
35749 cmdtp, flag, argc and argv arguments. Simplify routines definition.
35751 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35753 commit c87796483bc7c2900470dc747c367f602577608d
35754 Author: Marian Balakowicz <m8@semihalf.com>
35755 Date: Wed Mar 12 10:12:37 2008 +0100
35757 [new uImage] Add new uImage format support for ramdisk handling
35759 This patch updates boot_get_ramdisk() routine adding format
35760 verification and handling for new (FIT) uImages.
35762 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35764 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
35765 Author: Marian Balakowicz <m8@semihalf.com>
35766 Date: Wed Mar 12 10:01:05 2008 +0100
35768 [new uImage] Add new uImage format support for kernel booting
35770 New format uImages are recognized by the bootm command,
35771 validity of specified kernel component image is checked and
35772 its data section located and used for further processing
35773 (uncompress, load, etc.)
35775 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35777 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
35778 Author: Marian Balakowicz <m8@semihalf.com>
35779 Date: Tue Mar 11 12:35:20 2008 +0100
35781 [new uImage] Add new uImage format support for imls and iminfo commands
35783 imls and iminfo can now recognize nad print out contents of the new (FIT)
35786 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35788 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
35789 Author: Bartlomiej Sieka <tur@semihalf.com>
35790 Date: Tue Mar 11 12:34:47 2008 +0100
35792 [new uImage] Add support for new uImage format to mkimage tool
35794 Support for the new uImage format (FIT) is added to mkimage tool.
35795 Commandline syntax is appropriately extended:
35797 mkimage [-D dtc_options] -f fit-image.its fit-image
35799 mkimage (together with dtc) takes fit-image.its and referenced therein
35800 binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
35801 final image that can be transferred to the target (e.g., via tftp) and then
35802 booted using the bootm command in U-Boot.
35804 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35806 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
35807 Author: Marian Balakowicz <m8@semihalf.com>
35808 Date: Mon Mar 10 17:53:49 2008 +0100
35810 [new uImage] Make node unit names const in struct bootm_headers
35812 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35814 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
35815 Author: Marian Balakowicz <m8@semihalf.com>
35816 Date: Fri Feb 29 21:24:06 2008 +0100
35818 [new uImage] New uImage low-level API
35820 Add FDT-based functions for handling new format component images,
35821 configurations, node operations, property get/set, etc.
35823 fit_ - routines handling global new format uImage operations
35824 like get/set top level property, process all nodes, etc.
35825 fit_image_ - routines handling component images subnodes
35826 fit_conf_ - routines handling configurations node
35828 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
35829 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
35831 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
35832 Author: Wolfgang Denk <wd@denx.de>
35833 Date: Sun Mar 9 16:20:02 2008 +0100
35837 Update CHANGELOG for release.
35839 Signed-off-by: Wolfgang Denk <wd@denx.de>
35841 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
35842 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35843 Date: Sun Mar 9 14:52:11 2008 +0100
35845 SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
35847 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35848 Signed-off-by: Wolfgang Denk <wd@denx.de>
35850 commit db695b78515ddb88a2d4f3357c120345efbf59ec
35851 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35852 Date: Sun Mar 9 10:44:01 2008 +0100
35854 scb9328: Fix flash warning: type qualifiers ignored on function return type
35856 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35858 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
35859 Author: Wolfgang Denk <wd@denx.de>
35860 Date: Sun Mar 9 10:50:41 2008 +0100
35862 esd/common/fpga.c: fix indentation.
35864 Signed-off-by: Wolfgang Denk <wd@denx.de>
35866 commit cc3843e36453e2b8db65d7e56de938ba045016a0
35867 Author: Wolfgang Denk <wd@denx.de>
35868 Date: Sun Mar 9 10:33:31 2008 +0100
35870 common/kgdb.c: fix 'dereferencing type-punned pointer' warning
35872 and get rid of a couple of unneeded casts.
35874 Signed-off-by: Wolfgang Denk <wd@denx.de>
35876 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
35877 Author: Wolfgang Denk <wd@denx.de>
35878 Date: Sun Mar 9 10:09:53 2008 +0100
35880 esd/common/fpga.c: fix 'assignment of read-only location' error
35882 Signed-off-by: Wolfgang Denk <wd@denx.de>
35884 commit c6fe4dabac066e8758345d249032768496983a3e
35885 Author: Wolfgang Denk <wd@denx.de>
35886 Date: Sun Mar 9 02:13:19 2008 +0100
35888 Makefile: make build silently again.
35890 Signed-off-by: Wolfgang Denk <wd@denx.de>
35892 commit 76babc86576f092573599334c85ec543fdbc6015
35893 Author: Wolfgang Denk <wd@denx.de>
35894 Date: Sun Mar 9 02:07:49 2008 +0100
35896 m501sk: Fix out of tree building
35898 Signed-off-by: Wolfgang Denk <wd@denx.de>
35900 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
35901 Author: Wolfgang Denk <wd@denx.de>
35902 Date: Sun Mar 9 00:06:09 2008 +0100
35904 ADS5121: fix out of tree build
35906 and simplify Makefile a bit.
35908 Signed-off-by: Wolfgang Denk <wd@denx.de>
35910 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
35911 Author: Wolfgang Denk <wd@denx.de>
35912 Date: Sat Mar 8 22:35:31 2008 +0100
35916 Signed-off-by: Wolfgang Denk <wd@denx.de>
35918 commit 78a90f827df74520e939c794fc7413dace21c4db
35919 Author: Wolfgang Denk <wd@denx.de>
35920 Date: Sat Mar 8 22:35:04 2008 +0100
35924 Signed-off-by: Wolfgang Denk <wd@denx.de>
35926 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
35927 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35928 Date: Sat Mar 8 21:30:04 2008 +0100
35930 esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
35932 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
35934 commit d75469d48c05795144f4b8ba76addbb4920a7bba
35935 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35936 Date: Sat Mar 8 09:25:49 2008 +0900
35938 net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
35940 When rtl_recv() of rtl8169 is called, OWNbit of status register
35941 is not enable occasionally.
35942 rtl_recv() doesn't work normally when the driver doesn't do
35943 appropriate processing.
35944 This patch fix this problem.
35946 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
35948 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
35949 Author: Heiko Schocher <hs@denx.de>
35950 Date: Fri Mar 7 08:15:28 2008 +0100
35952 mgsuvd: update board configuration
35954 initialize the UPIOx controller.
35956 Signed-off-by: Heiko Schocher <hs@denx.de>
35958 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
35959 Author: Heiko Schocher <hs@denx.de>
35960 Date: Fri Mar 7 08:13:41 2008 +0100
35962 mgcoge: update board configuration
35964 add support for the config Flash.
35965 initialize the UPIOx controller.
35967 Signed-off-by: Heiko Schocher <hs@denx.de>
35969 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
35970 Author: Kim Phillips <kim.phillips@freescale.com>
35971 Date: Fri Mar 7 12:27:31 2008 -0600
35973 mpc83xx: make dtb basename file references equal those of linux
35975 the dts file basenames were updated in linux - this helps avoid
35976 inadvertently loading any old dtbs laying around.
35978 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35980 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
35981 Author: Kim Phillips <kim.phillips@freescale.com>
35982 Date: Wed Feb 27 16:08:22 2008 -0600
35984 net: uec_phy: actually increment the timeout counter
35986 allow u-boot to recover (and, e.g., switch to another interface) in the
35987 case where a PHY does not report autonegotiation is complete within its
35988 two second timeout value.
35990 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
35992 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
35993 Author: Markus Brunner <super.firetwister@googlemail.com>
35994 Date: Wed Mar 5 21:38:12 2008 +0100
35996 fix taihu soft spi_read
35998 The taihu board used gpio_read_out_bit which reads the output register and not
36001 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
36003 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
36004 Author: Stefan Roese <sr@denx.de>
36005 Date: Fri Mar 7 08:01:43 2008 +0100
36007 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
36009 Signed-off-by: Stefan Roese <sr@denx.de>
36011 commit bd4458cb47abecabd406b1210457be96c69fc49d
36012 Author: Dave Liu <r63238@freescale.com>
36013 Date: Tue Mar 4 16:59:22 2008 +0800
36015 837xEMDS: Improve the system performance
36017 1. Make the CSB bus pipeline depth as 4, and enable
36019 2. Raise the eTSEC emergency priority;
36020 3. Use the highest IP blocks clock.
36022 Signed-off-by: Dave Liu <daveliu@freescale.com>
36024 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
36025 Author: Detlev Zundel <dzu@denx.de>
36026 Date: Thu Mar 6 16:45:53 2008 +0100
36028 Replace "run load; run update" with conditionalized "run load update".
36030 The latter version stops when "run load" fails for whatever reasons
36031 rendering the combination *a lot* more secure.
36033 Signed-off-by: Detlev Zundel <dzu@denx.de>
36035 commit 6bc113886d7d316df1a4e459bec8baf027518551
36036 Author: Stefan Roese <sr@denx.de>
36037 Date: Tue Mar 4 17:40:41 2008 +0100
36039 net: Print error message upon net usage when no ethernet-interface is found
36041 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
36042 defined. Then no ethernet interface is available but a simple "tftp"
36043 command will return without any error message which is quite confusing.
36045 Signed-off-by: Stefan Roese <sr@denx.de>
36047 commit a30a549a3553032d809e0356306b62de0b125901
36048 Author: Jon Loeliger <jdl@freescale.com>
36049 Date: Tue Mar 4 10:03:03 2008 -0600
36051 Remove erroneous or extra spd.h #includers.
36053 Many of the spd.h #includers don't need it,
36054 and wanted to have spd_sdram() declared instead.
36055 Since they didn't get that, some also had open
36056 coded extern declarations of it instead or as well.
36057 Fix it all up by using spd_sdram.h where needed.
36059 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36061 commit a4475386cef14af3fd88f0518b688e755669486d
36062 Author: Wolfgang Denk <wd@denx.de>
36063 Date: Tue Mar 4 17:41:28 2008 +0100
36065 PCS440EP: fix build problems (redundant #define)
36067 Signed-off-by: Wolfgang Denk <wd@denx.de>
36069 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
36070 Author: Stefan Roese <sr@denx.de>
36071 Date: Tue Mar 4 17:39:25 2008 +0100
36073 net: Print error message upon net usage when no ethernet-interface is found
36075 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
36076 defined. Then no ethernet interface is available but a simple "tftp"
36077 command will return without any error message which is quite confusing.
36079 Signed-off-by: Stefan Roese <sr@denx.de>
36081 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
36082 Author: Wolfgang Denk <wd@denx.de>
36083 Date: Tue Mar 4 17:38:50 2008 +0100
36085 W7OLMC/W7OLMG: fix build problems (redundant #define)
36087 Signed-off-by: Wolfgang Denk <wd@denx.de>
36089 commit f9301e1cda296245ba052d7b08321199c3d0af9d
36090 Author: Wolfgang Denk <wd@denx.de>
36091 Date: Tue Mar 4 14:58:31 2008 +0100
36093 Makefile: fix problem with out-of-tree builds introduced by 5013c09f
36095 Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
36096 problem for out-of-tree builds which caused "make clean" to fail.
36098 Signed-off-by: Wolfgang Denk <wd@denx.de>
36100 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
36101 Author: Wolfgang Denk <wd@denx.de>
36102 Date: Tue Mar 4 11:58:26 2008 +0100
36104 examples/Makefile: build "hello_world" on 8xx, too.
36106 Signed-off-by: Wolfgang Denk <wd@denx.de>
36108 commit 74eb0222594fd23aafdf168e60e872814eea8b62
36109 Author: Mike Nuss <mike@terascala.com>
36110 Date: Mon Mar 3 15:27:05 2008 -0500
36112 PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
36114 Every now and then a Sequoia board (or equivalent hardware) had
36115 problems connecting to a Gigabit capable network interface.
36117 There were differences in the PHY setup between Linux and U-Boot.
36119 This patch fixes the problem. Apparently "remote fault" is being set,
36120 which signals to some devices (on the other end of the cable) that a
36121 fault has occurred, while other devices ignore it. I believe the RF bit
36122 was causing the issue, but I removed T4 also, to match up with Linux.
36124 Signed-off-by: Mike Nuss <mike@terascala.com>
36126 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
36127 Author: Timur Tabi <timur@freescale.com>
36128 Date: Mon Mar 3 09:58:52 2008 -0600
36130 fix QE firmware uploading limit
36132 Fix a typo in qe_upload_firmware() that prevented uploading firmware on
36133 systems with more than one RISC core.
36135 Signed-off-by: Timur Tabi <timur@freescale.com>
36137 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
36138 Author: Bernhard Nemec <bnemec@ganssloser.com>
36139 Date: Mon Mar 3 11:57:23 2008 +0000
36141 Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
36143 Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
36144 see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
36146 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
36148 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
36149 Author: Kim B. Heino <Kim.Heino@bluegiga.com>
36150 Date: Mon Mar 3 10:39:13 2008 +0200
36152 fix copy from ram to dataflash
36154 If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
36155 routines instead of dataflash. This is because it checks "if source
36156 address is not dataflash" instead of target address.
36158 Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
36160 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
36161 Author: Wolfgang Denk <wd@denx.de>
36162 Date: Mon Mar 3 12:16:44 2008 +0100
36164 Fix quoting problem (preboot setting) in many board config files.
36166 Signed-off-by: Wolfgang Denk <wd@denx.de>
36168 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
36169 Author: Wolfgang Denk <wd@denx.de>
36170 Date: Mon Mar 3 12:36:49 2008 +0100
36172 ADS5121: Fix default environment.
36174 Signed-off-by: Wolfgang Denk <wd@denx.de>
36176 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
36177 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36178 Date: Sun Mar 2 16:12:31 2008 +0100
36180 Makefile: Fix missing unconfig and mkconfig use
36182 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36184 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
36185 Author: michael <trimarchi@gandalf.sssup.it>
36186 Date: Sun Mar 2 23:33:46 2008 +0100
36188 Fix checking fat32 cluster size.
36190 This fixes the cluster size tests in the FAT32 file system.
36191 The current implementation of VFAT support doesn't work if the
36192 referred cluster has an offset > 16bit representation, causing
36193 "fatload" and "fatls" commands etc. to fail.
36195 Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
36197 commit 661bad63a076a96c39c64f136915f146725af92b
36198 Author: Wolfgang Denk <wd@denx.de>
36199 Date: Sun Mar 2 22:57:23 2008 +0100
36201 Prepare v1.3.2-rc2 release candidate
36203 Signed-off-by: Wolfgang Denk <wd@denx.de>
36205 commit 76957cb3d621bf664311908e5962e151c633c285
36206 Author: Stefan Roese <sr@denx.de>
36207 Date: Sat Mar 1 12:11:40 2008 +0100
36209 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
36211 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
36212 currently 4k/2k is configured. This patch fixes this issue.
36214 Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
36216 Signed-off-by: Stefan Roese <sr@denx.de>
36218 commit 118978c8eb43803e2794233922df4249fa278b83
36219 Author: Woodruff, Richard <r-woodruff2@ti.com>
36220 Date: Fri Feb 29 17:34:35 2008 -0600
36222 Fix alignment error on ARM for modules
36224 Fix alignment fault on ARM when running modules. With out an explicit
36225 linker file gcc4.2.1 will half word align __bss_start's value. The word
36226 dereference will crash hello_world.
36228 signed-off-by Richard Woodruff <r-woodruff2@ti.com>
36230 commit ce1120dd703e6f12c59e4eba9962356a0300b832
36231 Author: Dave Liu <r63238@freescale.com>
36232 Date: Fri Feb 29 17:45:31 2008 +0800
36234 fs: Fix ext2 read issue
36236 The ext2 aligned process will corrupt the key
36237 data struct, the patch fix this.
36239 Signed-off-by: Dave Liu <daveliu@freescale.com>
36241 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
36242 Author: Wolfgang Denk <wd@denx.de>
36243 Date: Sun Mar 2 22:45:33 2008 +0100
36245 Makefile: cleanup "clean" target
36247 Make sure CDPATH settings cannot interfere.
36250 Signed-off-by: Wolfgang Denk <wd@denx.de>
36252 commit ffda586fc1373243c9794babde69500f6293a8d8
36253 Author: Li Yang <leoli@freescale.com>
36254 Date: Fri Feb 29 11:46:05 2008 +0800
36256 add cscope build target
36258 Add cscope build target to generate cscope database for code browsing.
36260 Signed-off-by: Li Yang <leoli@freescale.com>
36262 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
36263 Author: Kim Phillips <kim.phillips@freescale.com>
36264 Date: Wed Feb 27 15:06:39 2008 -0600
36266 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
36268 erratum 5.6 states the autoneg completion bit is functional only if the
36269 autoneg bit is asserted.
36271 This fixes any secondarily-issued networking commands on non-gigabit
36272 links on the mpc8360 mds board.
36274 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36276 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
36277 Author: John Rigby <jrigby@freescale.com>
36278 Date: Tue Feb 26 09:38:14 2008 -0700
36280 MPC5121e ADS PCI support take 3
36282 Adds PCI support for MPC5121
36284 Tested with drivers/net/rtl8139.c
36286 Support is conditional since PCI on old silicon does not work.
36288 ads5121_PCI_config turns on PCI
36290 In this version, condition compilation of PCI code has been moved
36291 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
36292 suggested by Jean-Christophe PLAGNIOL-VILLARD
36294 Signed-off-by: John Rigby <jrigby@freescale.com>
36296 commit 44b4dbed4133f657705b7c5193209da9978243a7
36297 Author: Anatolij Gustschin <agust@denx.de>
36298 Date: Mon Feb 25 23:53:07 2008 +0100
36300 Fix warnings while compilation of post/drivers/memory.c
36302 Fix warnings while compilation with new gcc in eldk-4.2
36304 Signed-off-by: Anatolij Gustschin <agust@denx.de>
36306 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
36307 Author: Anatolij Gustschin <agust@denx.de>
36308 Date: Mon Feb 25 20:54:04 2008 +0100
36310 ppc4xx: Fix problem in 4xx_enet.c driver
36312 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
36313 enabled. To reproduce the problem ensure that 'ethrotate'
36314 environment variable isn't set to "no" and then run
36315 "tftp 200000 not_existent_file".
36316 This patch tries to fix the issue.
36318 Signed-off-by: Anatolij Gustschin <agust@denx.de>
36320 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
36321 Author: Anatolij Gustschin <agust@denx.de>
36322 Date: Mon Feb 25 20:04:20 2008 +0100
36324 POST: Disable cache while SPR POST
36326 Currently (since commit b2e2142c) u-boot crashes on
36327 sequoia board while SPR test if CONFIG_4xx_DCACHE is
36328 enabled. This patch disables the cache while SPR test.
36330 Signed-off-by: Anatolij Gustschin <agust@denx.de>
36332 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
36333 Author: Martin Krause <martin.krause@tqs.de>
36334 Date: Mon Feb 25 17:52:40 2008 +0100
36336 TQM5200: use automatic fdt memory fixup (part 2)
36338 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
36339 TB5200 and TB5200_B to fixup the /memory node with the memory values
36340 detected by U-Boot.
36342 Signed-off-by: Martin Krause <martin.krause@tqs.de>
36344 commit 44ceec253ea941b301abf4b079d52324def69d92
36345 Author: Martin Krause <martin.krause@tqs.de>
36346 Date: Mon Feb 25 15:17:05 2008 +0100
36348 TQM5200: use automatic fdt memory fixup
36350 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
36351 TB5200 and TB5200_B to fixup the /memory node with the memory values
36352 detected by U-Boot.
36354 Signed-off-by: Martin Krause <martin.krause@tqs.de>
36356 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
36357 Author: Martin Krause <martin.krause@tqs.de>
36358 Date: Mon Feb 25 13:27:52 2008 +0100
36360 TQM5200: fix bug in SDRAM initialization code
36362 This patch fixes a bug in the SDRAM initialization code for the
36363 TQM5200. The hi_addr bit is now set correctly. Without this patch
36364 the hi_addr bit is always set to 1, if the second SDRAM bank is
36367 For other MPC5200 boards a correspondig patch has already been applied
36368 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
36370 Signed-off-by: Martin Krause <martin.krause@tqs.de>
36372 Forget the first patch please. I confused flash with SDRAM in
36375 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
36376 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36377 Date: Mon Feb 25 00:03:12 2008 +0100
36379 mx1fs2/flash: Fix multiple compiler warnings
36381 "pointer targets in assignment differ in signedness"
36383 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36385 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
36386 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36387 Date: Mon Feb 25 00:03:11 2008 +0100
36389 arm-imx: Fix register definitions
36391 Sync register definitions with linux
36393 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36395 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
36396 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36397 Date: Mon Feb 25 00:03:10 2008 +0100
36399 actua1/actua2/actua3: Fix multiple unused variable warnings
36402 actux1.c: In function 'checkboard':
36403 actux1.c:92: warning: unused variable 'revision'
36406 actux2.c: In function 'checkboard':
36407 actux2.c:100: warning: unused variable 's'
36408 actux2.c:99: warning: unused variable 'revision'
36409 actux2.c: In function 'reset_phy':
36410 actux2.c:130: warning: unused variable 'i'
36413 actux3.c: In function 'checkboard':
36414 actux3.c:114: warning: unused variable 'revision'
36416 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36418 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
36419 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36420 Date: Sun Feb 24 11:44:29 2008 +0900
36422 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
36424 The previous patch was lacking of i386, microblaze, nios and nios2. This
36425 patch tries to fix them.
36427 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36429 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
36430 Author: Marian Balakowicz <m8@semihalf.com>
36431 Date: Fri Feb 29 22:22:46 2008 +0100
36433 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
36435 Do not use global fdt blob pointer, calculate blob size from routine
36436 argument blob pointer.
36438 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36440 commit d1cc52879c8966507dad9fb575481e6d3985e64e
36441 Author: David Gibson <david@gibson.dropbear.id.au>
36442 Date: Tue Feb 12 00:58:31 2008 +1100
36444 libfdt: Add and use a node iteration helper function.
36446 This patch adds an fdt_next_node() function which can be used to
36447 iterate through nodes of the tree while keeping track of depth. This
36448 function is used to simplify the iteration code in a lot of other
36449 functions, and is also exported for use by library users.
36451 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
36453 commit 8cf30809a82902a471866d2f07725ce3b8a22291
36454 Author: Bartlomiej Sieka <tur@semihalf.com>
36455 Date: Fri Feb 29 16:00:24 2008 +0100
36457 [new uImage] Add libfdt support to mkimage
36459 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
36461 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
36462 Author: Bartlomiej Sieka <tur@semihalf.com>
36463 Date: Fri Feb 29 16:00:23 2008 +0100
36465 [new uImage] Add sha1.o object to mkimage binary build
36467 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
36469 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
36470 Author: Marian Balakowicz <m8@semihalf.com>
36471 Date: Fri Feb 29 16:00:06 2008 +0100
36473 [new uImage] Fix component handling for legacy multi component images
36475 Use uint32_t when accessing size table in image_multi_count() and
36476 image_multi_getimg() for multi component images.
36478 Add missing uimage_to_cpu() endianness conversion.
36480 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36482 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
36483 Author: Marian Balakowicz <m8@semihalf.com>
36484 Date: Fri Feb 29 15:59:59 2008 +0100
36486 [new uImage] Share common uImage code between mkimage and U-boot
36488 This patch adds the following common routines:
36490 1) Dedicated mkimage print_header() is replaced with common
36491 image_print_contents()
36492 image_print_contents_noindent()
36494 2) Common os/arch/type/comp fields name <--> id translation routines
36495 genimg_get_os_name()
36496 genimg_get_arch_name()
36497 genimg_get_type_name()
36498 genimg_get_comp_name()
36500 genimg_get_arch_id()
36501 genimg_get_type_id()
36502 genimg_get_comp_id()
36504 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36506 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
36507 Author: Marian Balakowicz <m8@semihalf.com>
36508 Date: Fri Feb 29 14:58:34 2008 +0100
36510 [new uImage] Update naming convention for bootm/uImage related code
36512 This patch introduces the following prefix convention for the
36513 image format handling and bootm related code:
36515 genimg_ - dual format shared code
36516 image_ - legacy uImage format specific code
36517 fit_ - new uImage format specific code
36518 boot_ - booting process related code
36520 Related routines are renamed and a few pieces of code are moved around and
36523 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36525 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
36526 Author: Kumar Gala <galak@kernel.crashing.org>
36527 Date: Wed Feb 27 21:51:51 2008 -0600
36529 [new uImage] Respect autostart setting in linux bootm
36531 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36532 Acked-by: Marian Balakowicz <m8@semihalf.com>
36534 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
36535 Author: Kumar Gala <galak@kernel.crashing.org>
36536 Date: Wed Feb 27 21:51:50 2008 -0600
36538 [new uImage] Provide ability to restrict region used for boot images
36540 Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
36541 to restrict what memory range is used for bootm.
36543 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36544 Acked-by: Marian Balakowicz <m8@semihalf.com>
36546 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
36547 Author: Kumar Gala <galak@kernel.crashing.org>
36548 Date: Wed Feb 27 21:51:49 2008 -0600
36550 [new uImage] Use lmb for bootm allocations
36552 Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
36553 functions over to using lmb for allocation of the ramdisk, command line
36554 and kernel bd info.
36556 Convert PPC specific fdt_relocate() to use lmb for allocation of the device
36559 Provided a weak function that board code can call to do additional
36560 lmb reserves if needed.
36562 Also introduce the concept of bootmap_base to specify the offset in
36563 physical memory that the bootmap is located at. This is used for
36564 allocations of the cmdline, kernel bd, and device tree as they should
36565 be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
36567 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36569 commit f5614e7926863bf0225ec860d9b319741a9c4004
36570 Author: Kumar Gala <galak@kernel.crashing.org>
36571 Date: Wed Feb 27 21:51:48 2008 -0600
36573 [new uImage] Add autostart flag to bootm_headers structure
36575 The autostart env variable was dropped as part of the initial new uImage
36576 cleanup. Add it back here so the arch specific code can decide if it
36577 wants to really boot or not.
36579 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36580 Acked-by: Marian Balakowicz <m8@semihalf.com>
36582 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
36583 Author: Kumar Gala <galak@kernel.crashing.org>
36584 Date: Wed Feb 27 21:51:47 2008 -0600
36586 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
36588 Introduce the LMB lib used on PPC in the kernel as a clean way to manage
36589 the memory spaces used by various boot images and structures. This code
36590 will allow us to simplify the code in bootm and its support functions.
36592 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36594 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
36595 Author: Kumar Gala <galak@kernel.crashing.org>
36596 Date: Tue Feb 19 22:03:47 2008 -0600
36598 [new uImage] ppc: Allow boards to specify effective amount of memory
36600 For historical reasons we limited the stack to 256M because some boards
36601 could only map that much via BATS. However newer boards are capable of
36602 mapping more memory (for example 85xx is capable of doing up to 2G).
36604 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36605 Acked-by: Marian Balakowicz <m8@semihalf.com>
36607 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
36608 Author: Kumar Gala <galak@kernel.crashing.org>
36609 Date: Wed Feb 27 21:51:46 2008 -0600
36611 [new uImage] rework error handling so common functions don't reset
36613 Changed image_get_ramdisk() to just return NULL on error and have
36614 get_ramdisk() propogate that error to the caller. It's left to the
36615 caller to call do_reset() if it wants to.
36617 Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
36618 to a common location. In the future we will change get_fdt() and
36619 fdt_relocate() to return success/failure and not call do_reset() at all.
36621 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36622 Acked-by: Marian Balakowicz <m8@semihalf.com>
36624 commit d2bc095a639672def11d5d043b5688d0dbd692ec
36625 Author: Kumar Gala <galak@kernel.crashing.org>
36626 Date: Wed Feb 27 21:51:45 2008 -0600
36628 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
36630 Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
36631 however it does mean we have to go in and fixup the initrd info since
36632 we don't know where it will be.
36634 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36636 commit 27953493ef025fb698d68c5dee39b36f01f4d530
36637 Author: Kumar Gala <galak@kernel.crashing.org>
36638 Date: Wed Feb 27 21:51:44 2008 -0600
36640 [new uImage] ppc: Determine if we are booting an OF style
36642 If we are bootin OF style than we can skip setting up some things
36643 that are used for the old boot method.
36645 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36646 Acked-by: Marian Balakowicz <m8@semihalf.com>
36648 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
36649 Author: Kumar Gala <galak@kernel.crashing.org>
36650 Date: Wed Feb 27 21:51:43 2008 -0600
36652 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
36654 We don't actually need the kdb param as we are just using it to get
36655 bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
36656 boot via OF we might not actually fill out a kdb.
36658 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36659 Acked-by: Marian Balakowicz <m8@semihalf.com>
36661 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
36662 Author: Kumar Gala <galak@kernel.crashing.org>
36663 Date: Wed Feb 27 16:30:47 2008 -0600
36665 85xx: Don't icbi when unlocking the cache
36667 There is no reason to icbi when invalidating the temporary stack in
36668 the d-cache. Its impossible on e500 to have the i-cache contain
36669 any addresses in the temp stack and it can be problematic in generating
36670 transactions on the bus to non-valid addresses.
36672 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
36674 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
36675 Author: Andy Fleming <afleming@freescale.com>
36676 Date: Wed Feb 27 15:50:50 2008 -0600
36678 Fix source for ECM error IVPR
36680 The source vector for the ECM was being set to 2,
36681 but that's what the source vector for DDR was being
36682 set to. Change it to 1.
36684 Signed-off-by: Andy Fleming <afleming@freescale.com>
36686 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
36687 Author: Andy Fleming <afleming@freescale.com>
36688 Date: Wed Feb 27 14:29:58 2008 -0600
36690 Invalidate INIT_RAM TLB mappings
36692 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
36693 mappings to be unguarded. This collided with an existing "bug"
36694 where the mappings for the INIT_RAM were being kept around.
36695 This meant that speculative loads to those addresses were
36696 succeeding in the TLB, and going out to the bus, where they
36697 were causing an exception (there's nothing at that address). The
36698 Flash code was coincidentally causing such a speculative load.
36699 Rather than go back to mapping the INIT RAM as guarded, we fix
36700 it so that the entries for the INIT_RAM are invalidated. Thus
36701 the speculative loads will fail in the TLB, and have no effect.
36703 Signed-off-by: Andy Fleming <afleming@freescale.com>
36705 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
36706 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36707 Date: Sun Feb 17 22:56:17 2008 +0100
36709 sbc8548: Fix Revision reading and unused variable 'path'
36711 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36713 commit 495d162374c472f46454453553382ad0735dc725
36714 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36715 Date: Sun Feb 17 22:56:16 2008 +0100
36717 sbc8548: Fix cfi flash bank declaration
36719 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36721 commit 4efbe9dbb129f857f27856936112c8c02f016be6
36722 Author: Marian Balakowicz <m8@semihalf.com>
36723 Date: Wed Feb 27 11:02:26 2008 +0100
36725 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
36727 Dual format image code must properly handle all three FDT passing methods:
36728 - raw FDT blob passed
36729 - FDT blob embedded in the legacy uImage
36730 - FDT blob embedded in the new uImage
36732 This patch enables proper raw FDT handling when no FIT imaeg support
36733 is compiled in. This is a bit tricky as we must dected FIT format even
36734 when FIT uImage handling is not enabled as both FIT uImages and raw FDT
36735 blobs use tha same low level format (libfdt).
36737 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36739 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
36740 Author: Marian Balakowicz <m8@semihalf.com>
36741 Date: Wed Feb 27 11:02:26 2008 +0100
36743 [new uImage] POWERPC: Add image_get_fdt() routine
36745 FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
36746 (3) or embedded in the new uImage. For the (2) case embedding image must be
36747 verified before we get FDT from it. This patch factors out legacy image
36748 specific verification routine to the separate helper routine.
36750 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36751 Acked-by: Kumar Gala <galak@kernel.crashing.org>
36753 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
36754 Author: Marian Balakowicz <m8@semihalf.com>
36755 Date: Wed Feb 27 11:02:07 2008 +0100
36757 [new uImage] Add image_get_kernel() routine
36759 Legacy image specific verification is factored out to a separate helper
36760 routine to keep get_kernel() generic and simple.
36762 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36763 Acked-by: Kumar Gala <galak@kernel.crashing.org>
36765 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
36766 Author: Marian Balakowicz <m8@semihalf.com>
36767 Date: Wed Feb 27 11:01:04 2008 +0100
36769 [new uImage] Move image verify flag to bootm_headers structure
36771 Do not pass image verification flag directly to related routines.
36772 Simplify argument passing and move it to the bootm_header structure which
36773 contains curently processed image specific data and is already being passed
36774 on the argument list.
36776 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36777 Acked-by: Kumar Gala <galak@kernel.crashing.org>
36779 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
36780 Author: Marian Balakowicz <m8@semihalf.com>
36781 Date: Wed Feb 27 11:00:47 2008 +0100
36783 [Makefile] Sort COBJS in lib_<arch> Makefiles
36785 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36787 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
36788 Author: Marian Balakowicz <m8@semihalf.com>
36789 Date: Wed Feb 27 11:00:47 2008 +0100
36791 [new uImage] Optimize gen_get_image() flow control
36793 When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
36794 to do, update its control flow to better reflect that simple case.
36796 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36797 Acked-by: Kumar Gala <galak@kernel.crashing.org>
36799 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
36800 Author: Marian Balakowicz <m8@semihalf.com>
36801 Date: Mon Feb 4 08:28:17 2008 +0100
36803 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
36805 PPC specific FDT blob handling code is divided into two separate routines:
36807 get_fdt() - find and verify a FDT blob (either raw or image embedded)
36808 fdt_relocate() - move FDT blob to within BOOTMAP if needed
36810 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36811 Acked-by: Kumar Gala <galak@kernel.crashing.org>
36813 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
36814 Author: Jon Loeliger <jdl@freescale.com>
36815 Date: Mon Feb 25 13:13:37 2008 -0600
36817 86xx: Fix renamed GUR symbols in sbc8641d board.
36819 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
36820 (86xx: Fix GUR PCI config registers properly), we should have
36821 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
36822 symbols in the sbc8641d board as well. Fix this oversight.
36824 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36826 commit 64cd594e623c39f73964d18787763e4533f791f7
36827 Author: Stefan Roese <sr@denx.de>
36828 Date: Mon Feb 25 16:50:48 2008 +0100
36830 ppc4xx: Fix acadia_nand build problem
36832 Don't include testdram() on NAND-booting target acadia_nand. This saves
36833 a few bytes and makes the target build clean again.
36835 Signed-off-by: Stefan Roese <sr@denx.de>
36837 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
36838 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36839 Date: Sun Feb 24 23:03:12 2008 +0000
36841 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
36843 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36845 commit 724902c8464e610642b3a170278b99710325888e
36846 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36847 Date: Sun Feb 24 23:03:11 2008 +0000
36849 arm-imx: Fix registers definition
36851 Sync registers definition with linux
36853 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36855 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
36856 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36857 Date: Sun Feb 24 23:03:10 2008 +0000
36859 actua1/actua2/actua3: Fix multipleunused variable
36862 actux1.c: In function 'checkboard':
36863 actux1.c:92: warning: unused variable 'revision'
36866 actux2.c: In function 'checkboard':
36867 actux2.c:100: warning: unused variable 's'
36868 actux2.c:99: warning: unused variable 'revision'
36869 actux2.c: In function 'reset_phy':
36870 actux2.c:130: warning: unused variable 'i'
36873 actux3.c: In function 'checkboard':
36874 actux3.c:114: warning: unused variable 'revision'
36876 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36878 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
36879 Author: Marian Balakowicz <m8@semihalf.com>
36880 Date: Mon Feb 4 08:28:09 2008 +0100
36882 [new uImage] Add dual format uImage support framework
36884 This patch adds framework for dual format images. Format detection is added
36885 and the bootm controll flow is updated to include cases for new FIT format
36888 When the legacy (image_header based) format is detected appropriate
36889 legacy specific handling is invoked. For the new (FIT based) format uImages
36890 dual boot framework has a minial support, that will only print out a
36891 corresponding debug messages. Implementation of the FIT specific handling will
36892 be added in following patches.
36894 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
36896 commit b29661fc1151077776454288051bc9a488351ce8
36897 Author: Wolfgang Denk <wd@denx.de>
36898 Date: Sun Feb 24 15:21:36 2008 +0100
36900 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
36902 Signed-off-by: Wolfgang Denk <wd@denx.de>
36904 commit 00b48a48424894daa589d166d73277830b1c6ac4
36905 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36906 Date: Sat Feb 23 12:15:56 2008 +0100
36908 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
36910 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
36912 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
36913 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36914 Date: Sat Feb 23 17:24:16 2008 +0900
36916 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
36918 ----------------------------------------------------------------
36919 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
36921 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
36924 GCC can be made to warn about usage of long long types with ISO C90
36925 (-ansi), but only with -pedantic. You can write this in a way that even
36926 then it doesn't cause warnings, namely by:
36929 __extension__ typedef __signed__ long long __s64;
36930 __extension__ typedef unsigned long long __u64;
36933 The __extension__ keyword in front of this switches off any pedantic
36934 warnings for this expression.
36936 Signed-off-by: Olaf Hering <olh@suse.de>
36937 Cc: <linux-arch@vger.kernel.org>
36938 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
36939 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
36940 ----------------------------------------------------------------
36942 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36944 commit 208acd112e6517b21fc30c420396902b103563ac
36945 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36946 Date: Sat Feb 23 17:07:57 2008 +0900
36948 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
36950 This will reduce the build time.
36952 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36954 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
36955 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36956 Date: Sat Feb 23 17:05:00 2008 +0900
36958 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
36960 This will reduce the build time.
36962 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36964 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
36965 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36966 Date: Sat Feb 23 16:58:41 2008 +0900
36968 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
36970 This reduces the build time by ~10%. Here's the gth2_config example.
36973 real 0m31.441s 0m27.833s
36974 user 0m24.766s 0m23.045s
36975 sys 0m10.425s 0m7.468s
36977 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
36979 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
36980 Author: Marcel Moolenaar <marcelm@juniper.net>
36981 Date: Fri Feb 22 10:48:07 2008 -0800
36983 make define2mk.sed work on FreeBSD
36985 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
36986 the define2mk.sed script was identified as the source of the link
36987 failure on FreeBSD. The problem is that sed(1) does not always support
36988 the '+' operator. It isn't on FreeBSD. The attach patch implements the
36989 equivalent, using the '*' operator instead and should work everywhere.
36991 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
36993 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
36994 Author: Detlev Zundel <dzu@denx.de>
36995 Date: Fri Feb 22 17:21:32 2008 +0100
36997 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
36999 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
37000 final traces of long-deprecated "ramdisk" kernel parm") makes these
37001 changes neccessary.
37003 Signed-off-by: Detlev Zundel <dzu@denx.de>
37005 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
37006 Author: Larry Johnson <lrj@acm.org>
37007 Date: Thu Feb 21 13:58:16 2008 -0500
37009 LM75 bug fix for negative temperatures
37011 When the LM75 temperature sensor measures a temperature below 0 C, the
37012 current driver does not perform sign extension, so the result returned is
37013 256 C too high. This patch fixes the problem.
37015 Signed-off-by: Larry Johnson <lrj@acm.org>
37017 commit 5a910c224b13e413bda41922379add6d75c32da3
37018 Author: Heiko Schocher <hs@denx.de>
37019 Date: Thu Feb 21 18:33:45 2008 +0100
37021 IDS8247: update MAINTAINER entry.
37023 Signed-off-by: Heiko Schocher <hs@denx.de>
37025 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
37026 Author: Heiko Schocher <hs@denx.de>
37027 Date: Thu Feb 21 18:31:15 2008 +0100
37029 Fix device tree for mgsuvd board.
37031 Rename the "scc" node in "ethernet" for the mgsuvd board.
37033 Signed-off-by: Heiko Schocher <hs@denx.de>
37035 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
37036 Author: Yuri Tikhonov <yur@emcraft.com>
37037 Date: Thu Feb 21 14:23:42 2008 +0100
37039 lwmon5: enable hardware watchdog
37041 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
37042 causing it to reboot the board if U-Boot does a long busy-wait with
37043 udelay(). Thus, for these boards we have to restart WD more
37046 This patch splits the busy-wait udelay() into smaller, predefined,
37047 intervals, so that the watchdog timer may be resetted with the
37048 configurable (CONFIG_WD_PERIOD) interval.
37050 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
37052 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
37053 Author: Anatolij Gustschin <agust@denx.de>
37054 Date: Thu Feb 21 12:52:29 2008 +0100
37056 ppc4xx: Support for ATI Radeon 9200 card on sequoia
37058 Adds configuration option for ATI Radeon 9200 card
37059 support to sequoia config file. If CONFIG_VIDEO
37060 is enabled, TEXT_BASE should be changed to 0xFFF80000.
37062 Signed-off-by: Anatolij Gustschin <agust@denx.de>
37064 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
37065 Author: Kumar Gala <galak@kernel.crashing.org>
37066 Date: Mon Feb 18 08:18:07 2008 -0600
37068 Remove duplicate defines for ARRAY_SIZE
37070 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
37071 the define in common.h.
37073 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37075 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
37076 Author: Kumar Gala <galak@kernel.crashing.org>
37077 Date: Mon Feb 18 08:09:37 2008 -0600
37079 ppc: Allow boards to specify effective amount of memory
37081 For historical reasons we limited the stack to 256M because some boards
37082 could only map that much via BATS. However newer boards are capable of
37083 mapping more memory (for example 85xx is capable of doing up to 2G).
37085 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37087 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
37088 Author: Mike Frysinger <vapier@gentoo.org>
37089 Date: Mon Feb 18 05:24:13 2008 -0500
37091 include autoconf.mk before any other .mk files
37093 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
37094 those .mk files can have make if statements based on the current config.
37096 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37098 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
37099 Author: Mike Frysinger <vapier@gentoo.org>
37100 Date: Mon Feb 18 05:10:07 2008 -0500
37102 error check autoconf.mk generation
37104 If any of the steps for generating autoconf.mk fail currently, they go
37105 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
37106 This is simpler and more robust than placing '|| exit $$?' after every line.
37108 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37110 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
37111 Author: Stefano Babic <sbabic@denx.de>
37112 Date: Mon Feb 18 08:03:51 2008 +0100
37114 Fix bug in dependency checking
37116 By adding VERSION_FILE to the PHONY targets the script
37117 /tools/setlocalversion is always called and version_autogenerated.h
37118 is replaced only if the script find a modified source file.
37120 Signed-off-by: Stefano Babic <sbabic@denx.de>
37122 commit 98ba144ccc912eee90dd42699f023c497ce774c6
37123 Author: Kyungmin Park <kmpark@infradead.org>
37124 Date: Mon Feb 18 14:35:43 2008 +0900
37126 Fix GPMC CS2 memory setup at apollon
37128 It disables the current map first
37130 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
37132 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
37133 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37134 Date: Sun Feb 17 23:52:46 2008 +0100
37136 uli526x: Fix multiple differ in signedness and parentheses around comparison
37138 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37140 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
37141 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37142 Date: Sun Feb 17 16:58:04 2008 +0100
37144 MIPS: Fix CFG_NO_FLASH support
37146 - Fix flash_init call when CFG_NO_FLASH is used
37147 - Remove no more needed flash.c for qemu-mips
37149 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37151 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
37152 Author: Mike Frysinger <vapier@gentoo.org>
37153 Date: Sat Feb 16 02:40:18 2008 -0500
37155 easylogo: clean up some more and add -r (rgb) support
37157 Michael Hennerich added support for outputting an image in RGB format rather
37158 than forcing YUYV all the time. This makes obvious sense if the display you
37159 have takes RGB input rather than YUYV.
37161 Rather than hack in support for options, I've converted it to use getopt and
37162 cleaned up the argument parsing in the process.
37164 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
37165 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37167 commit f65c98129ccada3f7caf97d80395a95b84e911de
37168 Author: Mike Frysinger <vapier@gentoo.org>
37169 Date: Sat Feb 16 02:12:37 2008 -0500
37171 Makefile: add target for $(LDSCRIPT)
37173 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
37174 then change into the board directory and try and create it. This allows you
37175 to generate the linker script on the fly based upon board defines (like the
37176 Blackfin boards do).
37178 There should be no regressions due to this change as the normal case is to
37179 already have a u-boot.lds file. If that's the case, then there's nothing to
37180 generate, and so make will always exit. The fix here is that if the linker
37181 script does not exist, the implicit rules take over and attempt to guess how
37182 to generate the file.
37184 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37186 commit 5583cbf736474ef754e128a54fb78632f57b48fd
37187 Author: Marian Balakowicz <m8@semihalf.com>
37188 Date: Thu Feb 21 17:27:49 2008 +0100
37190 [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
37192 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37194 commit 2242f5369822bc7780db95c47985bb408ea9157b
37195 Author: Marian Balakowicz <m8@semihalf.com>
37196 Date: Thu Feb 21 17:27:41 2008 +0100
37198 [new uImage] Rename and move print_image_hdr() routine
37200 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37202 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
37203 Author: Marian Balakowicz <m8@semihalf.com>
37204 Date: Thu Feb 21 17:20:20 2008 +0100
37206 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
37208 Introducing routines for parsing new uImage format bootm arguments:
37209 [<addr>]#<conf> - configuration specification
37210 [<addr>]:<subimg> - subimage specification
37212 New format images can contain multiple subimages of the same type. For example
37213 a single new format image file can contain three kernels, two ramdisks and a
37214 couple of FDT blobs. Subimage and configuration specifications are extensions
37215 to bootm (and other image-related commands) arguments' syntax that allow to
37216 specify which particular subimage should be operated on.
37218 Subimage specification is used to denote a particular subimage. Configurations
37219 are a bit more complex -- they are used to define a particualr booting setup,
37220 for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
37223 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37225 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
37226 Author: Marian Balakowicz <m8@semihalf.com>
37227 Date: Thu Feb 21 17:20:19 2008 +0100
37229 [new uImage] Add gen_get_image() routine
37231 This routine assures that image (whether legacy or FIT) is not
37232 in a special dataflash storage.
37234 If image address is a dataflash address image is moved to system RAM.
37236 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37238 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
37239 Author: Marian Balakowicz <m8@semihalf.com>
37240 Date: Thu Feb 21 17:20:18 2008 +0100
37242 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
37244 New uImage format (Flattened Image Tree) requires libfdt
37245 functionality, print out error message if CONFIG_OF_LIBFDT
37248 New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
37249 This commit turns it on by default.
37251 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37253 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
37254 Author: Michael Schwingen <michael@schwingen.org>
37255 Date: Mon Feb 18 23:16:35 2008 +0100
37257 CFI: Do not use uninitialized cmd_reset
37259 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
37262 From a short test, it looks like AMD-style flash roms treat *any* unknown
37263 command write as a reset, at least when in CFI Query mode, so issuing the
37264 Intel reset command to AMD-style flashs seems safe (from the small sample I
37265 have), plus the 3-cycle magic sequence should kick the state machine into
37266 the right state even without a reset command. Since the AMD-style flashs
37267 require the unlock sequence for real operation, I chose to try the AMD reset
37268 command first, so that Intel flashs do no see an invalid command prior to
37271 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
37272 plus Intel StrataFlash.
37274 Signed-off-by: Michael Schwingen <michael@schwingen.org>
37275 Signed-off-by: Stefan Roese <sr@denx.de>
37277 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
37278 Author: Rafal Jaworowski <raj@semihalf.com>
37279 Date: Thu Feb 21 11:56:44 2008 +0100
37281 API: Add (c) and licensing notice to the public API header.
37283 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
37285 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
37286 Author: Yuri Tikhonov <yur@emcraft.com>
37287 Date: Thu Feb 21 11:06:07 2008 +0100
37289 Fix CPU POST test failure
37291 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
37292 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
37293 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
37294 This patch just saves the CR value before running the test code, so allowing
37295 it to do anything it wants with CR.
37297 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
37298 Acked-by: Yuri Tikhonov <yur@emcraft.com>
37301 commit d5908b093955415f3d340706378b991f911af671
37302 Author: Jon Loeliger <jdl@freescale.com>
37303 Date: Wed Feb 20 15:26:51 2008 -0600
37305 8610HPCD: Document the flashbank selection switches.
37307 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37309 commit a551cee99ad1d1da20fd23ad265de47448852f56
37310 Author: Jon Loeliger <jdl@freescale.com>
37311 Date: Wed Feb 20 14:22:26 2008 -0600
37313 86xx: Fix GUR PCI config registers properly.
37315 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
37316 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
37317 botched it due to not realizing that 8610 and 8641 had different
37318 Global Utility Register defintions, one of which was like 85xx,
37319 and the other wasn't. Correct this problem by introducing two
37320 symbols, one for each 86xx SoC, but neither of which is named
37321 anything like 85xx.
37323 My bad. Lovely Wednesday with git bisect. You know.
37325 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37327 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
37328 Author: Jon Loeliger <jdl@freescale.com>
37329 Date: Wed Feb 20 12:24:11 2008 -0600
37331 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
37333 Without an actual supported video card hooked up, enabling
37334 the CONFIG_VIDEO by default just makes it look broken by
37335 routing all console output to the video card. Don't.
37337 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37339 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
37340 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37341 Date: Wed Jan 30 15:08:15 2008 -0600
37343 ColdFire: Fix missing code flash size for M5485EVB
37345 Signed-off-by: James Mahan <kmahan@freescale.com>
37346 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
37348 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
37349 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
37350 Date: Wed Jan 30 15:04:42 2008 -0600
37352 ColdFire: Fix 5282 and 5271 interrupt mask bit
37354 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
37356 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
37357 Author: Jon Loeliger <jdl@freescale.com>
37358 Date: Tue Feb 19 12:31:08 2008 -0600
37360 8610HPCD: Fix typos in two PCI setup registers.
37362 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
37363 were erroneously present as 85xx names and values, leftover from
37364 the clone wars. Fix this by removing the 85xx cruft from the
37367 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37369 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
37370 Author: Jon Loeliger <jdl@freescale.com>
37371 Date: Mon Feb 18 14:01:56 2008 -0600
37373 86xx: Convert sbc8641d to use libfdt.
37375 This is the proper fix for a missing closing brace in the function
37376 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
37377 The ft_cpu_setup() function in mpc8641hpcn.c should have been
37378 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
37379 but was missed. Only, the sbc8641d was nominally still using it.
37380 It all got ripped out, and the funcality that was in ft_board_setup()
37381 was refactored to remove the CPU portions into the new file
37382 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
37384 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
37386 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37388 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
37389 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37390 Date: Sun Feb 17 23:35:31 2008 +0100
37392 mpc86xx: Fix unused variable 'config' and 'immap'
37394 and remove useless CONFIG_DDR_INTERLEAVE
37396 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37398 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
37399 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37400 Date: Sun Feb 17 23:03:36 2008 +0100
37402 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
37404 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37406 commit b6f29c84c208a091f95a10cbc9852d729659ba20
37407 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37408 Date: Sun Feb 17 14:15:31 2008 +0100
37410 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
37412 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37414 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
37415 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37416 Date: Sun Feb 17 14:15:32 2008 +0100
37418 pxa: fix assignment from incompatible pointer type
37420 fix mmc_bread function prototype
37422 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37424 commit 64d792063fff90b8118179b092feee09fe5cae13
37425 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37426 Date: Sun Feb 17 14:15:30 2008 +0100
37428 at91cap9adk: fix implicit declaration of function 'eth_init'
37430 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37432 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
37433 Author: Wolfgang Denk <wd@denx.de>
37434 Date: Sun Feb 17 15:43:44 2008 +0100
37436 Remove files added by mistake, update CHANGELOG.
37438 Signed-off-by: Wolfgang Denk <wd@denx.de>
37440 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
37441 Author: Mike Nuss <mike@terascala.com>
37442 Date: Wed Feb 6 11:10:11 2008 -0500
37444 PPC440EPx: Optionally enable second I2C bus
37446 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
37447 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
37448 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
37450 Signed-off-by: Mike Nuss <mike@terascala.com>
37451 Cc: Stefan Roese <sr@denx.de>
37453 commit ef5b4f221c22d05770878513951745f236b5b43f
37454 Author: Niklaus Giger <niklaus.giger@netstal.com>
37455 Date: Tue Feb 5 10:26:44 2008 +0100
37457 ppc4xx: HCU4/5. Cleanup configs
37459 - hcu4.h: Removed define of CONFIG_PPC405GPr
37460 - Corrected phy addresses
37461 - Fix boot variables
37462 - Respect line length of 80 chars
37464 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
37466 commit 74973126d1be63ac75bdc192f46234dca3a7c421
37467 Author: Niklaus Giger <niklaus.giger@netstal.com>
37468 Date: Tue Feb 5 11:31:28 2008 +0100
37470 ppc4xx: HCU4/5. Cleanups
37472 - Fix some coding style violations.
37473 - Use in/out_u16/32 where appropriate.
37474 - Use register names from ppc405.h.
37475 - Fix trace useage for Lauterbach.
37476 - Remove obsolete generation HCU2.
37477 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
37479 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
37481 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
37482 Author: Niklaus Giger <niklaus.giger@netstal.com>
37483 Date: Tue Feb 5 10:26:41 2008 +0100
37485 ppc4xx: PPC405GPr fix missing register definitions
37487 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
37489 commit 214398d9cb22268d9d4f7563359edca0f78297a2
37490 Author: Larry Johnson <lrj@acm.org>
37491 Date: Fri Jan 18 21:49:05 2008 -0500
37493 ppc4xx: Beautify configuration files for Sequoia and Korat boards
37495 Signed-off-by: Larry Johnson <lrj@acm.org>
37497 commit 30c6a241e88499f536e86d325759e29ba00ff67f
37498 Author: Anatolij Gustschin <agust@denx.de>
37499 Date: Fri Feb 15 20:09:01 2008 +0100
37501 Wipe out assembler warnings while compiling x86 biosemu
37503 This patch tries to get rid of some assembler warnings about
37504 changed .got2 section type while compiling x86 bios emulator
37507 Signed-off-by: Anatolij Gustschin <agust@denx.de>
37509 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
37510 Author: Wolfgang Denk <wd@denx.de>
37511 Date: Fri Feb 15 00:57:09 2008 +0100
37513 Prepare v1.3.2-rc1 release candidate
37515 commit f33e9653c9c09868995d788511d573771c209fe5
37516 Author: Anatolij Gustschin <agust@denx.de>
37517 Date: Fri Feb 15 00:13:20 2008 +0100
37519 Fix compile warning on lib_ppc/board.c
37521 Signed-off-by: Anatolij Gustschin <agust@denx.de>
37523 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
37524 Author: Anatolij Gustschin <agust@denx.de>
37525 Date: Thu Feb 14 18:22:04 2008 +0100
37527 Add Radeon Mobility 9200 pci device id to the radeon driver
37529 This patch extends PCI device id table of the
37530 radeon driver so that the driver will also support
37531 Radeon Mobility 9200 (M9+) based boards.
37533 Signed-off-by: Anatolij Gustschin <agust@denx.de>
37535 commit 1b8607e1f7143548c6062c28371449ec69588c00
37536 Author: Anatolij Gustschin <agust@denx.de>
37537 Date: Thu Feb 14 18:19:50 2008 +0100
37539 Extend ATI Radeon driver to support more video modes
37541 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
37542 800x600, 640x480 at 24, 16 and 8 bpp.
37544 Signed-off-by: Anatolij Gustschin <agust@denx.de>
37546 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
37547 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37548 Date: Sun Feb 10 17:05:20 2008 +0100
37550 xsengine: fix typo and few coding style
37552 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37554 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
37555 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
37556 Date: Fri Feb 8 21:25:58 2008 +0100
37558 Fix wrong memory limit calculation in memory-test
37560 If the length of the memory address range passed to the "mtest" command is
37561 not of the form 2^x - 1, not all address lines are tested. This bug is
37562 inherited from the original software at
37563 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
37566 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
37568 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
37569 Author: Wolfgang Denk <wd@denx.de>
37570 Date: Fri Feb 15 00:11:39 2008 +0100
37572 Coding STyle cleanup.
37574 Signed-off-by: Wolfgang Denk <wd@denx.de>
37576 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
37577 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
37578 Date: Tue Feb 5 13:30:43 2008 +0900
37580 sh: Fix register address of SH7722
37582 The address of SH7722 is wrong by old document.
37583 This patch fixes this problem.
37585 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
37587 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
37588 Author: Mike Frysinger <vapier@gentoo.org>
37589 Date: Mon Feb 4 17:44:23 2008 -0500
37591 only update version header as needed
37593 Constantly rebuilding the version header will force useless relinking, so we
37594 simply need to compare the new header with the existing one before updating
37597 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37599 commit 208447f8e953f347425eb92c8e28d59e6d911363
37600 Author: Mike Frysinger <vapier@gentoo.org>
37601 Date: Mon Jan 28 05:56:19 2008 -0500
37603 Do not specify a CROSS_COMPILE default when executing size
37605 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37607 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
37608 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
37609 Date: Wed Feb 13 11:19:19 2008 +0100
37611 Fix return value of mtest when CFG_ALT_MEMTEST set
37613 Fix a missing return statement from a non-void function.
37615 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
37617 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
37618 Author: Timur Tabi <timur@freescale.com>
37619 Date: Wed Jan 9 14:35:26 2008 -0600
37621 85xx, 86xx: Determine I2C clock frequencies and store in global_data
37623 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
37625 Update the get_clocks() function in 85xx and 86xx to determine the I2C
37626 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
37628 Signed-off-by: Timur Tabi <timur@freescale.com>
37630 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
37631 Author: Wolfgang Denk <wd@denx.de>
37632 Date: Thu Feb 14 23:18:01 2008 +0100
37634 TQM834x: clean up configuration
37636 Get board name consistent with Linux and elsewhere;
37637 get rid of local network definitions etc.
37639 Signed-off-by: Wolfgang Denk <wd@denx.de>
37641 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
37642 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37643 Date: Thu Feb 14 08:02:12 2008 +0100
37645 TFTP: fix search of ':' in BootFile
37647 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37649 commit 0bc9efada170096c6b273f19165e32936d330d80
37650 Author: Wolfgang Denk <wd@denx.de>
37651 Date: Thu Feb 14 22:46:55 2008 +0100
37653 Coding style cleanup; update CHANGELOG.
37655 Signed-off-by: Wolfgang Denk <wd@denx.de>
37657 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
37658 Author: Wolfgang Denk <wd@denx.de>
37659 Date: Thu Feb 14 22:43:22 2008 +0100
37661 PPC: Use r2 instead of r29 as global data pointer
37663 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
37664 will refuse to use load/store multiple insns; instead, it issues a
37665 list of simple load/store instructions upon function entry and exit,
37666 resulting in bigger code size, which in turn makes the build for a
37671 Signed-off-by: Wolfgang Denk <wd@denx.de>
37673 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
37674 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
37675 Date: Wed Jan 30 09:08:49 2008 +0100
37677 ARM: make the machid configurable via the environment
37679 If the variable "machid" exists, let do_bootm_linux use that instead
37680 of bd->bi_arch_number.
37682 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
37684 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
37685 Author: Vlad Lungu <vlad@comsys.ro>
37686 Date: Wed Jan 23 16:34:46 2008 +0200
37688 Use #ifdef CONFIG_FSLDMAFEC
37690 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
37693 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
37695 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
37696 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37697 Date: Sat Jan 19 10:25:59 2008 +0900
37699 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
37701 Current MII_DEBUG is confusing in two ways. One is useless define-then-
37702 undef at the top of the file. The other is there is only one debug() in
37703 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
37704 While there are many useful printf()/puts() debug codes, but they are for
37705 DEBUG, not for MII_DEBUG.
37707 This patch tries to put them all together into MII_DEBUG and debug().
37709 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
37711 commit 751b9b5189f3274b03c809172631316d6b002c82
37712 Author: Kyungmin Park <kmpark@infradead.org>
37713 Date: Thu Jan 17 16:43:25 2008 +0900
37715 OneNAND Initial Program Loader (IPL) support
37717 This patch enables the OneNAND boot within U-Boot.
37718 Before this work, we used another OneNAND IPL called X-Loader based
37719 on open source. With this work, we can build the oneboot.bin image
37720 without other program.
37722 The build sequence is simple.
37723 First, it compiles the u-boot.bin
37724 Second, it compiles OneNAND IPL
37725 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
37726 The mechanism is similar with NAND boot except it boots from itself.
37728 Another thing is that you can only use the OneNAND IPL only to work
37729 other bootloader such as RedBoot and so on.
37731 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
37733 commit 21f6f9636f0e978397548751347425fbf8d42bb3
37734 Author: Andy Fleming <afleming@freescale.com>
37735 Date: Wed Jan 16 13:06:59 2008 -0600
37737 Fix CONFIG_MMC usage in fat code
37739 A #if statement in fat.c depended on CONFIG_MMC, instead of
37740 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
37741 as "1" rather than just defined. Now it's better.
37743 Signed-off-by: Andy Fleming <afleming@freescale.com>
37745 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
37746 Author: Rafal Jaworowski <raj@semihalf.com>
37747 Date: Tue Jan 15 12:52:31 2008 +0100
37749 ppc: Refactor cache routines, so there is only one common set.
37751 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
37753 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
37754 Author: Jon Loeliger <jdl@jdl.com>
37755 Date: Wed Jan 23 15:55:02 2008 -0600
37757 86xx: Fix compilation warning in sys_eprom.c
37759 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
37761 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37763 commit 65230107025733e89e28fd5e5cfd916d4953c28a
37764 Author: Haavard Skinnemoen <hskinnemoen at>
37765 Date: Fri Feb 22 11:40:50 2008 +0000
37767 Move AT91RM9200DK board support under board/atmel
37769 We already have a vendor subdir for Atmel, so we should use it.
37771 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
37773 commit 6d0943a6be99977d6d853d51749e9963d68eb192
37774 Author: Andreas Engel <andreas.engel@ericsson.com>
37775 Date: Mon Jan 14 09:06:52 2008 +0000
37777 ARM: cleanup duplicated exception handlingcode
37779 Move duplicated exception handling code into lib_arm.
37781 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
37783 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
37784 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
37785 Date: Fri Feb 1 10:09:03 2008 +0000
37787 Support for Artila M-501 starter kit
37789 Kimmo Leppala / Sysart and
37790 Timo Tuunainen / Sysart
37792 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
37793 Author: Stelian Pop <stelian@popies.net>
37794 Date: Mon Feb 11 10:50:19 2008 +0000
37798 ---------------------------------
37800 read_dataflash() takes a signed char pointer as a parameter. Silence a
37801 few warnings dues to incorrect parameter types in env_dataflash.c.
37803 Signed-off-by: Stelian Pop <stelian@popies.net>
37805 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
37806 Author: Stelian Pop <stelian@popies.net>
37807 Date: Thu Feb 7 09:42:57 2008 +0000
37809 AT91CAP9 support : move board files to Atmel vendor directory.
37811 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
37813 Signed-off-by: Stelian Pop <stelian@popies.net>
37815 commit 7263ef191b87da94768f762c7093bedeb70db98f
37816 Author: Stelian Pop <stelian at>
37817 Date: Thu Jan 3 21:15:56 2008 +0000
37819 AT91CAP9 support : MACB changes
37821 Signed-off-by: Stelian Pop <stelian <at> popies.net>
37822 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
37824 commit 6afcabf11d7321850f4feaadfee841488ace54c5
37825 Author: Stelian Pop <stelian@popies.net>
37826 Date: Thu Feb 7 16:37:54 2008 +0000
37828 AT91CAP9 support : board/ files
37830 Signed-off-by: Stelian Pop <stelian@popies.net>
37832 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
37833 Author: Stelian Pop <stelian at>
37834 Date: Wed Jan 30 21:15:54 2008 +0000
37836 AT91CAP9 support : cpu/ files
37838 Signed-off-by: Stelian Pop <stelian <at> popies.net>
37840 commit fa506a926cec348805143576c941f8e61b333cc0
37841 Author: Stelian Pop <stelian@popies.net>
37842 Date: Thu Jan 31 21:15:53 2008 +0000
37844 AT91CAP9 support : include/ files
37846 Signed-off-by: Stelian Pop <stelian@popies.net>
37848 commit 20b197c6f2799af399a68f96a1aff543a75621b8
37849 Author: Stelian Pop <stelian@popies.net>
37850 Date: Sun Jan 20 19:49:21 2008 +0000
37852 AT91CAP9 support : build integration
37854 Signed-off-by: Stelian Pop <stelian@popies.net>
37856 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
37857 Author: Stelian Pop <stelian@popies.net>
37858 Date: Sun Jan 20 21:07:00 2008 +0000
37860 Improve DataFlash CS definition.
37862 Use a structure instead of the error prone unnamed array to
37863 define the possible dataflash banks.
37865 Signed-off-by: Stelian Pop <stelian@popies.net>
37867 commit a6cdd21b56014208706238712a853a9e9a0a2290
37868 Author: Stelian Pop <stelian@popies.net>
37869 Date: Sat Jan 19 21:09:35 2008 +0000
37871 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
37873 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
37875 cpu/arm926ejs/start.o: In function `cpu_init_crit':
37876 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
37878 Signed-off-by: Stelian Pop <stelian@popies.net>
37880 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
37881 Author: Peter Pearse <peter.pearse@arm.com>
37882 Date: Fri Feb 1 16:50:24 2008 +0000
37884 Fix timer overflow in DaVinci
37885 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
37887 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
37888 Author: Peter Pearse <peter.pearse@arm.com>
37889 Date: Fri Feb 1 16:49:08 2008 +0000
37891 Update board NetStar
37892 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
37894 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
37895 Author: Niklaus Giger <niklaus.giger@netstal.com>
37896 Date: Tue Feb 5 10:26:42 2008 +0100
37898 ppc4xx: HCU4/5. Fix make O=../xx
37900 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
37902 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
37903 Author: Larry Johnson <lrj@acm.org>
37904 Date: Tue Jan 22 08:51:59 2008 -0500
37906 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
37908 Signed-off-by: Larry Johnson <lrj@acm.org>
37910 commit fe891ecf4d187e9d11dde869ed4623af52b54451
37911 Author: Hiroshi Ito <ito@mlb.co.jp>
37912 Date: Thu Jan 31 18:35:04 2008 +0900
37914 NFS Timeout with large files.
37916 Retry to send NFS packet before reaching timeout.
37918 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
37920 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
37921 Author: Johannes Stezenbach <js@sig21.net>
37922 Date: Tue Jan 29 00:11:25 2008 +0100
37924 Add dependencies to avoid race conditions with parallel make.
37926 Signed-off-by: Johannes Stezenbach <js@sig21.net>
37928 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
37929 Author: Mike Frysinger <vapier@gentoo.org>
37930 Date: Mon Jan 28 05:46:01 2008 -0500
37932 Mark board_init_[fr] as noreturn
37934 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37936 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
37937 Author: Mike Frysinger <vapier@gentoo.org>
37938 Date: Mon Jan 28 05:28:50 2008 -0500
37940 Only use TEXT_BASE if defined by the board
37942 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37944 commit 1b769881750030f10743808b9d6013e11f559350
37945 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37946 Date: Fri Jan 25 07:54:47 2008 +0100
37948 Fix remaining CONFIG_COMMANDS
37953 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
37955 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
37956 Author: Niklaus Giger <niklaus.giger@netstal.com>
37957 Date: Mon Jan 21 16:46:00 2008 +0100
37959 Add *~ to .gitignore
37961 One should never add a backup file ending in with ~ to the git repository.
37963 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
37965 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
37966 Author: Kumar Gala <galak@kernel.crashing.org>
37967 Date: Thu Jan 17 00:02:10 2008 -0600
37969 Remove duplicate defines for ARRAY_SIZE
37971 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37973 commit c77ce474b1c57b13e9d36d9830f147966c143694
37974 Author: Stelian Pop <stelian@popies.net>
37975 Date: Mon Jan 14 22:08:14 2008 +0100
37977 Fix incorrect address test in AT91F_DataflashSelect().
37979 Signed-off-by: Stelian Pop <stelian@popies.net>
37981 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
37982 Author: Kumar Gala <galak@kernel.crashing.org>
37983 Date: Wed Feb 13 15:09:58 2008 -0600
37985 Fix building of fdt_support.c if DEBUG set
37987 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
37989 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
37990 Author: Jon Loeliger <jdl@freescale.com>
37991 Date: Tue Feb 12 14:53:28 2008 -0600
37993 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
37995 These replace direct structure references for IMMR sections.
37997 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37999 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
38000 Author: Wolfgang Denk <wd@denx.de>
38001 Date: Tue Feb 12 00:45:06 2008 +0100
38003 Get rid of "#undef DEBUG" from board config files.
38005 Signed-off-by: Wolfgang Denk <wd@denx.de>
38007 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
38008 Author: Timur Tabi <timur@freescale.com>
38009 Date: Tue Jan 15 17:09:41 2008 -0600
38011 Remove #undef DEBUG from MPC83xx board header files
38013 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
38014 The inclusion of this line makes it impossible to enable debug code in
38015 other source files, because "#define DEBUG" typically needs to be defined
38016 before any header files are included.
38018 Signed-off-by: Timur Tabi <timur@freescale.com>
38020 commit 69018ce2e086e9caf35b914d675b82bc4888f077
38021 Author: Kumar Gala <galak@kernel.crashing.org>
38022 Date: Thu Jan 17 08:25:45 2008 -0600
38024 QE: Move FDT support into a common file
38026 Move the flat device tree setup for QE related devices into
38027 a common file shared between 83xx & 85xx platforms that have QE's.
38029 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
38031 commit 5cf746c303710329f8040d9c62ee354313e3e91f
38032 Author: Marian Balakowicz <m8@semihalf.com>
38033 Date: Thu Jan 31 13:59:09 2008 +0100
38035 [new uImage] Move kernel data find code to get_kernel() routine
38037 Verification of the kernel image (in old format) and finding kernel
38038 data is moved to a dedicated routine. The routine will also hold
38039 support for, to be added, new image format.
38041 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38043 commit 7b325454fd231d4273de3fe373850f777fb086bf
38044 Author: Marian Balakowicz <m8@semihalf.com>
38045 Date: Thu Jan 31 13:58:20 2008 +0100
38047 [new uImage] Cleanup FDT handling in PPC do_boot_linux()
38049 Move FDT blob finding and relocation to a dedicated
38050 get_fdt() routine. It increases code readability and
38051 will make adding support for new uImage format easier.
38053 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38055 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
38056 Author: Marian Balakowicz <m8@semihalf.com>
38057 Date: Thu Jan 31 13:58:13 2008 +0100
38059 [new uImage] Cleanup do_botm_linux() boot allocations
38061 This patch moves common pre-boot allocation steps shared between PPC
38062 and M68K to a helper routines:
38065 - get_boot_sp_limit()
38066 - get_boot_cmline()
38070 - set_clocks_in_mhz()
38072 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38074 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
38075 Author: Marian Balakowicz <m8@semihalf.com>
38076 Date: Thu Jan 31 13:57:17 2008 +0100
38078 [new uImage] Move ramdisk loading to a common routine
38080 Ramdisk loading code, including initrd_high variable handling,
38081 was duplicated for PPC and M68K platforms. This patch creates
38082 common helper routine that is being called from both platform
38083 do_bootm_linux() routines.
38085 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38087 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
38088 Author: Marian Balakowicz <m8@semihalf.com>
38089 Date: Thu Jan 31 13:55:53 2008 +0100
38091 [new uImage] Removed dead ramdisk code on microblaze architectures
38093 Microblaze do_bootm_linux() includes ramdisk processing code but
38094 the ramdisk does not get used anywhere later on.
38096 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38098 commit 5ad03eb3854c162684222a718b44c0716ea0db03
38099 Author: Marian Balakowicz <m8@semihalf.com>
38100 Date: Thu Jan 31 13:55:39 2008 +0100
38102 [new uImage] Factor out common image_get_ramdisk() routine
38104 Architecture specific do_bootm_linux() routines share common
38105 ramdisk image processing code. Move this code to a common
38108 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38110 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
38111 Author: Marian Balakowicz <m8@semihalf.com>
38112 Date: Thu Jan 31 13:20:08 2008 +0100
38114 [new uImage] Move FDT error printing to common fdt_error() routine
38116 FDT error handling in PPC do_bootm_linux() shares the same message format.
38117 This patch moves error message printing to a helper fdt_error() routine.
38119 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38120 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
38122 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
38123 Author: Marian Balakowicz <m8@semihalf.com>
38124 Date: Thu Jan 31 13:20:07 2008 +0100
38126 [new uImage] Factor out common routines for getting os/arch/type/comp names
38128 Move numeric-id to name translation for image os/arch/type/comp header
38129 fields to a helper routines: image_get_os_name(), image_get_arch_name(),
38130 image_get_type_name(), image_get_comp_name().
38132 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38134 commit e99c26694a384221d336f6448c06a57479c0baa4
38135 Author: Marian Balakowicz <m8@semihalf.com>
38136 Date: Thu Jan 31 13:20:07 2008 +0100
38138 [new uImage] Remove standalone applications handling from boootm
38140 Standalone applications are supposed to be run using the "go" command.
38141 This patch removes standalone images handling from the do_bootm().
38143 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38145 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
38146 Author: Marian Balakowicz <m8@semihalf.com>
38147 Date: Thu Jan 31 13:20:07 2008 +0100
38149 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
38151 Support for OF_FLAT_TREE is to be obsoleted in the near future,
38152 remove related code from the bootm routines.
38154 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38156 commit 82850f3d32a2661868ec6876bed7a22c55cef718
38157 Author: Marian Balakowicz <m8@semihalf.com>
38158 Date: Thu Jan 31 13:20:06 2008 +0100
38160 [new uImage] Use image API in SH do_bootm_linux() routine
38162 Introduce image handling API for lately added Hitachi SH architecture.
38164 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38166 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
38167 Author: Marian Balakowicz <m8@semihalf.com>
38168 Date: Thu Jan 31 13:20:06 2008 +0100
38170 [new uImage] Rename architecture specific bootm code files
38172 Implementation of the do_bootm_linux() and other bootm helper routines is
38173 architecture specific code. As such it resides in lib_<arch> directories
38174 in files named <arch>_linux.c
38176 This patch renames those files to a more clear and accurate
38177 lib_<arch>/bootm.c form.
38179 List of the renamed files:
38180 lib_arm/armlinux.c -> lib_arm/bootm.c
38181 lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
38182 lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
38183 lib_i386/i386_linux.c -> lib_i386/bootm.c
38184 lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
38185 lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
38186 lib_mips/mips_linux.c -> lib_mips/bootm.c
38187 lib_nios/nios_linux.c -> lib_nios/bootm.c
38188 lib_nios2/nios_linux.c -> lib_nios2/bootm.c
38189 lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
38190 lib_sh/sh_linux.c -> lib_sh/bootm.c
38192 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38194 commit 7582438c285bf0cef82909d0f232de64ec567a8a
38195 Author: Marian Balakowicz <m8@semihalf.com>
38196 Date: Thu Jan 31 13:20:06 2008 +0100
38198 [new uImage] Return error on image move/uncompress overwrites
38200 Check for overwrites during image move/uncompress, return with error
38201 when the original image gets corrupted. Report clear message to the user
38202 and prevent further troubles when pointer to the corrupted images is passed
38203 to do_bootm_linux routine.
38205 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38207 commit f13e7b2e993c61fed1f607962501e051940d6e80
38208 Author: Marian Balakowicz <m8@semihalf.com>
38209 Date: Tue Jan 8 18:12:17 2008 +0100
38211 [new uImage] Cleanup image header pointer use in bootm code
38213 - use single image header pointer instead of a set of auxilliary variables.
38214 - add multi component image helper routines: get component size/data address
38216 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38218 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
38219 Author: Marian Balakowicz <m8@semihalf.com>
38220 Date: Tue Jan 8 18:17:10 2008 +0100
38222 [new uImage] Cleanup cmd_bootm.c
38224 - sort and cleanup headers, declarations, etc.
38225 - group related routines
38226 - cleanup indentation, white spaces
38228 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38230 commit af13cdbc01eaf88880978bfb4f603e012818ba24
38231 Author: Marian Balakowicz <m8@semihalf.com>
38232 Date: Tue Jan 8 18:11:45 2008 +0100
38234 [new uImage] Add memmove_wd() common routine
38236 Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
38238 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38240 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
38241 Author: Marian Balakowicz <m8@semihalf.com>
38242 Date: Tue Jan 8 18:11:44 2008 +0100
38244 [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
38246 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38248 commit 15158971f49255ccef54f0979a942cfd3de2ae52
38249 Author: Marian Balakowicz <m8@semihalf.com>
38250 Date: Tue Jan 8 18:11:44 2008 +0100
38252 [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
38254 Use image header copy instead of a (possibly corrupted) pointer to
38255 a initial image location.
38257 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38259 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
38260 Author: Marian Balakowicz <m8@semihalf.com>
38261 Date: Tue Jan 8 18:11:44 2008 +0100
38263 [new uImage] Remove I386 uImage fake_header() routine
38265 I386 targets are not using a uImage format, instead fake header
38266 is added to ram image before it is further processed by bootm.
38268 Remove this fixup and force proper uImage use for I386.
38270 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38272 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
38273 Author: Marian Balakowicz <m8@semihalf.com>
38274 Date: Tue Jan 8 18:11:44 2008 +0100
38276 [new uImage] Move CHUNKSZ definition to image.h
38278 CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
38279 move this definition to a common header.
38281 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38283 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
38284 Author: Marian Balakowicz <m8@semihalf.com>
38285 Date: Tue Jan 8 18:11:43 2008 +0100
38287 [new uImage] Move gunzip() common code to common/gunzip.c
38289 Move gunzip(), zalloc() and zfree() to a separate file.
38290 Share zalloc() and zfree() with cramfs uncompress routine.
38292 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38294 commit d45d5a18b6b36688f2365623f9d550566c664b5b
38295 Author: Marian Balakowicz <m8@semihalf.com>
38296 Date: Tue Jan 8 18:11:43 2008 +0100
38298 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
38300 Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
38301 readable in PPC variant of do_bootm_linux() routine.
38303 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38305 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
38306 Author: Marian Balakowicz <m8@semihalf.com>
38307 Date: Tue Jan 8 18:11:43 2008 +0100
38309 [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
38311 PPC implementation of do_bootm_linux() routine is moved to
38312 a dedicated file lib_ppc/ppc_linux.c
38314 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38316 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
38317 Author: Marian Balakowicz <m8@semihalf.com>
38318 Date: Tue Jan 8 18:14:09 2008 +0100
38320 [new uImage] Define a API for image handling operations
38322 - Add inline helper macros for basic header processing
38323 - Move common non inline code common/image.c
38324 - Replace direct header access with the API routines
38325 - Rename IH_CPU_* to IH_ARCH_*
38327 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38329 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
38330 Author: Marian Balakowicz <m8@semihalf.com>
38331 Date: Thu Jan 31 13:19:58 2008 +0100
38333 Add missing cmd_ximg.o to common/Makefile
38335 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
38337 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
38338 Author: Grzegorz Bernacki <gjb@semihalf.com>
38339 Date: Mon Jan 28 10:15:02 2008 +0100
38341 ADS5121e: DDR2 init/timing update.
38343 Signed-off-by: John Rigby <jrigby@freescale.com>
38344 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
38346 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
38347 Author: John Rigby <jrigby@freescale.com>
38348 Date: Wed Jan 30 13:36:57 2008 -0700
38350 Device tree updates
38352 Changes to match 5121 device tree going mainline in 2.6.25.
38354 Change OF_SOC from "soc5121" to plain "soc".
38355 Remove unneeded "ref-frequency" fixups.
38356 Remove "address" enetaddr fixup.
38358 Add bus-frequency fixup for old OF_SOC so old
38359 kernels with old device trees will work with new
38360 u-boot with 66MHz IPS clock
38362 Signed-off-by: John Rigby <jrigby@freescale.com>
38364 commit de55d18df3ff2ea614624e74793de7c43520e0e7
38365 Author: John Rigby <jrigby@freescale.com>
38366 Date: Wed Jan 30 13:36:56 2008 -0700
38368 Change IPS freq to 66MHz
38370 Recommended frequency is 66MHz
38371 Change divider from 4 to 3.
38373 Signed-off-by: John Rigby <jrigby@freescale.com>
38375 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
38376 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38377 Date: Mon Jan 14 22:38:55 2008 +0100
38379 xsengine: rename board_post_init to board_late_init
38381 missing migration from "Cleanup of some init functions"
38382 in c837dcb1a316745092567bfe4fb266d0941884ff
38384 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38386 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
38387 Author: Larry Johnson <lrj@acm.org>
38388 Date: Sat Jan 12 23:35:33 2008 -0500
38390 Add attribute POST_PREREL to ECC memory POST
38392 Signed-off-by: Larry Johnson <lrj@acm.org>
38394 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
38395 Author: Kumar Gala <galak@kernel.crashing.org>
38396 Date: Thu Jan 17 08:25:45 2008 -0600
38398 QE: Move FDT support into a common file
38400 Move the flat device tree setup for QE related devices into
38401 a common file shared between 83xx & 85xx platforms that have QE's.
38403 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
38405 commit d38da537943cd36356b9d3d9d9b60533554b81d8
38406 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38407 Date: Wed Jan 23 17:20:14 2008 +0100
38409 AVR32: Make SDRAM refresh rate configurable
38411 The existing code assumes the SDRAM row refresh period should always
38412 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
38413 refresh rate should really be 7.81 us.
38415 Add a refresh_period member to struct sdram_info and initialize it
38416 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
38417 panic() until the refresh_period member is updated properly.
38419 Big thanks to Gerhard Berghofer for pointing out this issue.
38421 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38423 commit 61151cccb660cdb06a07fb283de6089913d7bde0
38424 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38425 Date: Thu Apr 19 10:10:11 2007 +0200
38427 ATSTK1000: Fix potential flash programming bug
38429 The (now obsolete) atngw100 flash programming code was having problems
38430 programming the onboard at49bv642 chip. The atstk1000 flash
38431 programming code may have the same bug, so import fix for this problem
38432 from the AVR32 Linux BSP.
38434 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38436 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
38437 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38438 Date: Thu Nov 22 17:04:13 2007 +0100
38440 ATSTK1004: Fix comment about default load address
38442 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
38443 wouldn't have worked anyway since the board can only access 4MB of
38446 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38448 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
38449 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38450 Date: Thu Nov 22 17:01:24 2007 +0100
38452 ATSTK1002: Use SDRAM + 4MB as default load address
38454 Many people run into problems when they compile a big kernel and load
38455 the uImage at the default SDRAM + 2MB address as the kernel will
38456 overwrite the uImage as it is being unpacked. Increase the default
38457 load address so that we can load a 4MB kernel image without any
38460 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38462 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
38463 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38464 Date: Thu Nov 22 16:51:39 2007 +0100
38466 ATNGW100: Fix default mtest range
38468 Let mtest cover the whole SDRAM except the last megabyte, which is
38469 where u-boot lives.
38471 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38473 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
38474 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
38475 Date: Tue Jan 22 15:31:56 2008 +0900
38477 sh: Fix register address of SH7722.
38479 The address of SH7722 is wrong by old document.
38480 This patch fixes this problem.
38482 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
38484 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
38485 Author: Mike Frysinger <vapier@gentoo.org>
38486 Date: Mon Feb 4 19:26:57 2008 -0500
38488 new command for displaying strings at specified memory locations
38490 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38492 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
38493 Author: Mike Frysinger <vapier@gentoo.org>
38494 Date: Mon Feb 4 19:26:57 2008 -0500
38496 rewrite/cleanup Blackfin RTC driver
38498 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38500 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
38501 Author: Mike Frysinger <vapier@gentoo.org>
38502 Date: Mon Feb 4 19:26:57 2008 -0500
38504 generate u-boot.ldr for Blackfin targets
38506 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38508 commit b779f7a59530436040f157f7841db7ab796542df
38509 Author: Mike Frysinger <vapier@gentoo.org>
38510 Date: Mon Feb 4 19:26:57 2008 -0500
38512 scrub unused symbols
38514 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38516 commit cc2977acc3bbbb7850f16645dd1081f95335868d
38517 Author: Mike Frysinger <vapier@gentoo.org>
38518 Date: Mon Feb 4 19:26:57 2008 -0500
38520 move Blackfin cpu object list to respective cpu directories
38522 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38524 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
38525 Author: Mike Frysinger <vapier@gentoo.org>
38526 Date: Mon Feb 4 19:26:57 2008 -0500
38528 interface to Blackfin on-chip One-Time-Programmable memory
38530 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38532 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
38533 Author: Mike Frysinger <vapier@gentoo.org>
38534 Date: Mon Feb 4 19:26:56 2008 -0500
38536 add support for memory commands with Blackfin L1 instruction memory
38538 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38540 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
38541 Author: Mike Frysinger <vapier@gentoo.org>
38542 Date: Mon Feb 4 19:26:56 2008 -0500
38544 use C code rather than inline assembly
38546 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38548 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
38549 Author: Mike Frysinger <vapier@gentoo.org>
38550 Date: Mon Feb 4 19:26:56 2008 -0500
38552 add Blackfin-specific reginfo command
38554 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38556 commit 0858b835e7ea501ea084d34cef75932f098342bb
38557 Author: Mike Frysinger <vapier@gentoo.org>
38558 Date: Mon Feb 4 19:26:55 2008 -0500
38560 add support for Blackfin symbol prefixes to examples
38562 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38564 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
38565 Author: Mike Frysinger <vapier@gentoo.org>
38566 Date: Mon Feb 4 19:26:55 2008 -0500
38568 add Blackfin-specific bdinfo command
38570 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38572 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
38573 Author: Mike Frysinger <vapier@gentoo.org>
38574 Date: Mon Feb 4 19:26:55 2008 -0500
38576 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
38578 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38580 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
38581 Author: Mike Frysinger <vapier@gentoo.org>
38582 Date: Mon Feb 4 19:26:55 2008 -0500
38584 unify the Blackfin board targets
38586 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38588 commit d4d7730853e5d675f76ec666807da3028c91d592
38589 Author: Mike Frysinger <vapier@gentoo.org>
38590 Date: Mon Feb 4 19:26:55 2008 -0500
38592 punt Blackfin VDSP headers and import sanitized/auto-generated ones
38594 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38596 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
38597 Author: Mike Frysinger <vapier@gentoo.org>
38598 Date: Mon Feb 4 19:26:54 2008 -0500
38600 always pull in asm/blackfin.h for Blackfin ports
38602 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38604 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
38605 Author: Mike Frysinger <vapier@gentoo.org>
38606 Date: Mon Feb 4 19:26:54 2008 -0500
38608 add missing __raw versions of Blackfin read/write io functions
38610 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38612 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
38613 Author: Mike Frysinger <vapier@gentoo.org>
38614 Date: Mon Feb 4 19:26:54 2008 -0500
38616 add the default Blackfin logo used by Blackfin boards with splash screens
38618 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38620 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
38621 Author: Mike Frysinger <vapier@gentoo.org>
38622 Date: Mon Feb 4 19:26:54 2008 -0500
38624 add some more Blackfin docs
38626 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38628 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
38629 Author: Mike Frysinger <vapier@gentoo.org>
38630 Date: Mon Feb 4 19:26:54 2008 -0500
38632 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
38634 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38636 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
38637 Author: Mike Frysinger <vapier@gentoo.org>
38638 Date: Mon Feb 4 19:26:54 2008 -0500
38640 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
38642 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38644 commit b45264ee85cbd92020640a32e02fb434fd557108
38645 Author: Mike Frysinger <vapier@gentoo.org>
38646 Date: Mon Feb 4 19:26:53 2008 -0500
38648 add gitignores for Blackfin pieces
38650 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38652 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
38653 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38654 Date: Fri Jan 18 01:14:03 2008 +0100
38656 TFTP: add host ip addr support
38658 allow to use a different server as set in serverip
38659 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
38660 if not defined the max length will be at 128
38662 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
38664 commit e56b4b494cd92def577969f9678395aa22d34c9f
38665 Author: Timur Tabi <timur@freescale.com>
38666 Date: Wed Jan 9 14:35:26 2008 -0600
38668 85xx,86xx: Determine I2C clock frequencies and store in global_data
38670 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
38672 Update the get_clocks() function in 85xx and 86xx to determine the I2C
38673 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
38675 Signed-off-by: Timur Tabi <timur@freescale.com>
38677 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
38678 Author: Wolfgang Denk <wd@denx.de>
38679 Date: Thu Dec 27 10:56:54 2007 +0100
38681 OMAP5912: fix FIFO handling in UART driver
38683 According to the OMAP5912 Serial Interfaces Reference Guide (see
38684 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
38685 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
38686 changed when the baud clock is not running, i. e. when both DLL and
38689 Thus make sure that DLL and DLH are 0 when writing the FCR.
38691 Signed-off-by: Wolfgang Denk <wd@denx.de>
38693 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
38694 Author: Harald Welte <laforge@openmoko.org>
38695 Date: Wed Dec 19 15:10:52 2007 +0100
38697 ARM: S3C24x0 SoC NAND controller support
38699 This patch adds NAND support to the S3C24x0 SoC code in u-boot
38701 Signed-off-by: Harald Welte <laforge@openmoko.org>
38703 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
38704 Author: Harald Welte <laforge@openmoko.org>
38705 Date: Wed Dec 19 14:24:40 2007 +0100
38707 ARM: s3c24xx: Multiple serial port support
38709 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
38711 Signed-off-by: Harald Welte <laforge@openmoko.org>
38713 commit a25f72f1f73a11de68251fb88c89991e202e68fa
38714 Author: Harald Welte <laforge@openmoko.org>
38715 Date: Wed Dec 19 14:16:57 2007 +0100
38717 ARM: arm920t: Allow use of 'gd' pointer from IRQ
38719 This patch allows us to use the 'gd' pointer (and thus environment
38720 and everything else associated with it) from interrupt context on
38723 Signed-off-by: Harald Welte <laforge@openmoko.org>
38725 commit be19bd5cd0f454b63298844a0b5377e029b2caad
38726 Author: Harald Welte <laforge@openmoko.org>
38727 Date: Wed Dec 19 14:19:38 2007 +0100
38729 ARM: arm920/s3c24xx: IRQ demulitplexer callback
38731 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
38732 plus a stub implementation of it for the S3C2410.
38734 The purpose is to allow arm920t implementations such as the s3c24x0 to
38735 implement interrupt handlers in u-boot without having to touch core
38738 Signed-off-by: Harald Welte <laforge@openmoko.org>
38740 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
38741 Author: Hebbar <gururajakr@sanyo.co.in>
38742 Date: Tue Dec 18 16:03:07 2007 -0800
38744 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
38746 Add ifdef to bdinfo command to display ethernet information
38747 only if CONFIG_CMD_NET is defined for arm modules.
38749 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
38751 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
38752 Author: Hebbar <gururajakr@sanyo.co.in>
38753 Date: Tue Dec 18 16:00:54 2007 -0800
38755 ARM: add I2C init function call in lib_arm/board.c
38757 Adds I2C init func call to init sequence for ARM boards. This is
38758 present in ppc,blackfin and other processor init sequence.
38760 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
38762 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
38763 Author: Stefan Roese <sr@denx.de>
38764 Date: Fri Feb 1 09:38:29 2008 +0100
38766 ppc4xx: Fix ndfc HW ECC byte order
38768 The current ndfc HW ECC implementation swaps the first two ECC bytes.
38769 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
38770 so this swapping in the HW ECC driver is bogus. This patch fixes this
38771 problem and now really uses the SMC ECC byte order.
38773 Thanks to Sean MacLennan for pointing this out.
38775 Signed-off-by: Stefan Roese <sr@denx.de>
38777 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
38778 Author: Stefan Roese <sr@denx.de>
38779 Date: Wed Jan 30 15:35:50 2008 +0100
38781 ppc4xx: Fix GPIO configuration for pcs440ep
38783 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
38784 49-63 for GPIO. They have been configured as trace signals. This patch
38785 fixes this by clearing the corresponding bit.
38787 Signed-off-by: Stefan Roese <sr@denx.de>
38789 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
38790 Author: Stefan Roese <sr@denx.de>
38791 Date: Wed Jan 30 14:48:28 2008 +0100
38793 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
38795 Signed-off-by: Stefan Roese <sr@denx.de>
38797 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
38798 Author: Ladislav Michl <ladis@linux-mips.org>
38799 Date: Fri Dec 7 00:42:32 2007 +0100
38801 ARM: Board voiceblue update
38803 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
38805 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
38806 Author: Ladislav Michl <ladis@linux-mips.org>
38807 Date: Thu Dec 6 23:24:57 2007 +0100
38809 ARM: AT91RM9200 based boards config cleanup
38811 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
38813 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
38816 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
38817 Author: Ladislav Michl <ladis@linux-mips.org>
38818 Date: Thu Dec 6 22:59:16 2007 +0100
38820 ARM: Fix at91rm9200dk base address
38822 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
38823 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
38824 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
38825 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
38826 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
38827 I'm sending this patch 4th (!) time in hope it produces at least some
38830 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
38832 Fix at91rm9200dk base and environment address.
38834 commit c95219fae2a7add7daa2f91aedca65b1698465c7
38835 Author: stefano babic <sbabic@denx.de>
38836 Date: Tue Nov 20 10:40:24 2007 +0100
38838 MMC for PXA 27X (resubmit)
38840 MMC support for X_Scale PXA is broken and does not work.
38841 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
38842 There were already some patches around the world but none of them was
38843 merged into the official u-boot tree.
38845 This patch makes order fixing this issue. Resubmit after code cleanup.
38847 Applied and tested on PXA 270 (TrizepsIV module).
38849 Signed-off-by: Stefano Babic <sbabic@denx.de>
38851 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
38852 Author: stefano babic <sbabic@denx.de>
38853 Date: Tue Nov 20 10:37:04 2007 +0100
38855 Fix gcc issues in pxa-regs.h
38857 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
38858 issues generates wrong code.
38859 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
38860 This patch fixes the problem and solves the gcc-4 issues as the linux
38863 Signed-off-by: Stefano Babic <sbabic@denx.de>
38864 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
38866 commit 7047b388876e7b905b2ec4edb8010543e3641b85
38867 Author: Jens Gehrlein <sew_s@tqs.de>
38868 Date: Tue Jan 29 08:45:03 2008 +0100
38870 TQM834x: enable DHCP
38872 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
38873 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38875 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
38876 Author: Jens Gehrlein <sew_s@tqs.de>
38877 Date: Tue Jan 29 08:45:02 2008 +0100
38879 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
38881 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
38882 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38884 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
38885 Author: Ben Warren <biggerbadderben@gmail.com>
38886 Date: Sat Jan 26 23:41:19 2008 -0500
38888 Fix conditional compilation of mpx8xxx_spi driver
38890 This driver should only compile if CONFIG_MPC8XXX_SPI is set
38892 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
38893 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38895 commit 63f732d3d3880feb531f48af247c025bf01462b0
38896 Author: Rafal Jaworowski <raj@semihalf.com>
38897 Date: Tue Jan 29 17:00:34 2008 +0100
38899 API: Provide dummy halt() in the glue layer.
38901 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
38903 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
38905 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
38906 Author: Rafal Jaworowski <raj@semihalf.com>
38907 Date: Tue Jan 29 16:57:38 2008 +0100
38909 API: Convert conditional building to the new scheme.
38911 This fixes a build breakage with CONFIG_API enabled, which appeared after
38912 the recent changes in the U-Boot build system.
38914 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
38916 commit 98b742489c09780be6a832eeaa4e5eff824792bb
38917 Author: Wolfgang Denk <wd@denx.de>
38918 Date: Fri Jan 25 09:56:17 2008 +0100
38920 inka4x0: remove dead code
38922 Signed-off-by: Wolfgang Denk <wd@denx.de>
38924 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
38925 Author: Becky Bruce <becky.bruce@freescale.com>
38926 Date: Wed Jan 23 16:31:06 2008 -0600
38928 86xx: Add reginfo command
38930 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
38932 commit ddcebcb638715a6278da93b553d5016f99823816
38933 Author: Becky Bruce <becky.bruce@freescale.com>
38934 Date: Wed Jan 23 16:31:05 2008 -0600
38936 86xx: Add print_laws function to fsl_law.c
38938 This can be used for debug, and will be used by board code
38939 to help implement reginfo.
38941 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
38943 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
38944 Author: Becky Bruce <becky.bruce@freescale.com>
38945 Date: Wed Jan 23 16:31:04 2008 -0600
38947 86xx: Remove old-style law setup code
38949 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
38951 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
38953 commit 713d8186649dae874613d495b0cecaa039a98b30
38954 Author: Becky Bruce <becky.bruce@freescale.com>
38955 Date: Wed Jan 23 16:31:03 2008 -0600
38957 86xx: Convert sbc8641d to use new law setup code.
38959 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
38961 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
38962 Author: Becky Bruce <becky.bruce@freescale.com>
38963 Date: Wed Jan 23 16:31:02 2008 -0600
38965 86xx: Convert mpc8610hpcd to new law setup method.
38967 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
38969 commit 4933b91f8a49e436681f163df3173beb91cac44a
38970 Author: Becky Bruce <becky.bruce@freescale.com>
38971 Date: Wed Jan 23 16:31:01 2008 -0600
38973 86xx: Support new law setup method and convert mpc8641
38975 Adds the support code in cpu/mpc86xx for the new law setup code
38976 recently created fsl_law.c, and changes the MPC8641HPCN config
38979 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
38981 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
38982 Author: Becky Bruce <becky.bruce@freescale.com>
38983 Date: Wed Jan 23 16:31:00 2008 -0600
38985 86xx: Rearrange the sequence in start.S
38987 * split the BAT initialization so that only 2 BATs (for the boot page
38988 and stack) are programmed very early on. The rest are initialized later.
38989 * Move other BAT setup, ccsrbar setup, and law setup later in the code
38990 after translation has been enabled.
38992 These changes will facilitate the moving of law and BAT initialization
38993 to C code, and will aid with 36-bit physical addressing support.
38995 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
38997 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
38998 Author: Wolfgang Denk <wd@denx.de>
38999 Date: Wed Jan 23 14:41:37 2008 +0100
39001 Coding Style Cleanup; update CHANGELOG
39003 Signed-off-by: Wolfgang Denk <wd@denx.de>
39005 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
39006 Author: Wolfgang Denk <wd@denx.de>
39007 Date: Wed Jan 23 14:31:17 2008 +0100
39009 Coding Style Cleanup; update CHANGELOG
39011 Signed-off-by: Wolfgang Denk <wd@denx.de>
39013 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
39014 Author: Dave Liu <r63238@freescale.com>
39015 Date: Fri Jan 18 10:07:04 2008 +0800
39017 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
39019 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
39020 cause the 83xx immap broken, so the DMA and PCI will
39023 The patch fix the struct spi8xxx and rm struct spi83xx.
39025 Signed-off-by: Dave Liu <daveliu@freescale.com>
39026 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39028 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
39029 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
39030 Date: Sat Apr 14 17:11:49 2007 +0200
39032 AVR32: ATNGW100 board support
39034 Add support for the ATNGW100 Network Gateway reference design,
39035 including flash, ethernet and MMC support.
39037 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39039 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
39040 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
39041 Date: Sat Nov 24 18:15:31 2007 +0100
39043 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
39045 I don't know why the relevant layers can't do this by itself, but this
39048 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
39050 commit 799891ef7b1b3432032ec23466df6b665a797fa4
39051 Author: Michael Schwingen <michael@schwingen.org>
39052 Date: Fri Jan 18 00:04:28 2008 +0100
39054 Add AcTux board support
39058 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
39060 contain changes for multiple boards, the board-specific files follow as
39063 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39065 commit 66a4344a4d910a11125df7768899ad529719855e
39066 Author: Michael Schwingen <michael@schwingen.org>
39067 Date: Wed Jan 16 19:53:23 2008 +0100
39069 add AcTux-4 board support
39071 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39073 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
39074 Author: Michael Schwingen <michael@schwingen.org>
39075 Date: Wed Jan 16 19:51:55 2008 +0100
39077 add AcTux-3 board support
39079 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39081 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
39082 Author: Michael Schwingen <michael@schwingen.org>
39083 Date: Wed Jan 16 19:51:14 2008 +0100
39085 add AcTux-2 board support
39087 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39089 commit ea99e8f05b7240fd657739e286664664ae160abe
39090 Author: Michael Schwingen <michael@schwingen.org>
39091 Date: Wed Jan 16 19:50:37 2008 +0100
39093 add AcTux-1 board support
39095 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39097 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
39098 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39099 Date: Mon Jan 14 19:20:08 2008 +0100
39101 ARM: remove useless function board_post_init
39103 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39105 commit 96bd462942022e4569b582c072a0ed26de1cd19b
39106 Author: Michael Schwingen <michael@schwingen.org>
39107 Date: Thu Jan 10 14:59:46 2008 +0100
39111 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
39112 No handshaking is done, but the active RTS signal allows to
39113 connect to the target using a PC which is using RTS/CTS
39114 handshake, and does no harm if the PC is set to ignore RTS.
39116 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39118 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
39119 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39120 Date: Mon Jan 7 08:41:34 2008 +0100
39122 IXP: add dynamic microcode addr
39124 allow to load the microde from flash or ram by download it through
39125 the serial or other.
39127 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39128 Acked-by: Stefan Roese <sr@denx.de>
39130 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
39131 Author: Michael Schwingen <michael@schwingen.org>
39132 Date: Sat Nov 10 15:44:12 2007 +0100
39134 load ixp42x NPE firmware from separate flash block, remove dead code
39138 the following patch adds support to move the IXP42X NPE firmware to a
39139 separate flash block, whose start address is defined in
39140 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
39141 NPE-enabled u-boot without copyright problems due to the NPE firmware.
39143 I hope the patch applies, I get whitespace-related differences in the NPE
39144 files due to trailing whitespace in the original versions.
39146 Signed-off-by: Michael Schwingen <michael@schwingen.org>
39147 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39149 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
39150 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39151 Date: Tue Jan 15 14:15:46 2008 -0600
39153 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
39155 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39156 Signed-off by: John Rigby <jrigby@freescale.com>
39158 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
39159 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39160 Date: Tue Jan 15 14:02:49 2008 -0600
39162 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
39164 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39165 Signed-off by: John Rigby <jrigby@freescale.com>
39167 commit 777d1abd9796f1c2e148417cc10657e847d318ce
39168 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39169 Date: Tue Jan 15 14:00:25 2008 -0600
39171 ColdFire: Add MCF547x_8x FEC driver
39173 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39174 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39175 Signed-off by: John Rigby <jrigby@freescale.com>
39177 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
39178 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39179 Date: Tue Jan 15 13:54:09 2008 -0600
39181 ColdFire: Add MCF547x_8x dma code and header files
39183 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39184 Signed-off by: John Rigby <jrigby@freescale.com>
39186 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
39187 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39188 Date: Tue Jan 15 13:52:03 2008 -0600
39190 ColdFire: Add MCF547x_8x dma code - 2
39192 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39193 Signed-off by: John Rigby <jrigby@freescale.com>
39195 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
39196 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39197 Date: Tue Jan 15 13:48:52 2008 -0600
39199 ColdFire: Add MCF547x_8x dma code - 1
39201 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39202 Signed-off by: John Rigby <jrigby@freescale.com>
39204 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
39205 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39206 Date: Tue Jan 15 13:39:44 2008 -0600
39208 ColdFire: Add MCF547x_8x related header files
39210 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39211 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39212 Signed-off by: John Rigby <jrigby@freescale.com>
39214 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
39215 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39216 Date: Tue Jan 15 13:37:34 2008 -0600
39218 ColdFire: Add MCF547x_8x cpu arch
39220 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39221 Signed-off by: John Rigby <jrigby@freescale.com>
39223 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
39224 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39225 Date: Mon Jan 14 17:47:23 2008 -0600
39227 ColdFire: Add MCF5227x cpu and M52277EVB support-3
39229 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39230 Signed-off by: John Rigby <jrigby@freescale.com>
39232 commit c87581027994c148131b2f11aa75501f782ec19a
39233 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39234 Date: Mon Jan 14 17:46:19 2008 -0600
39236 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
39238 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39239 Signed-off by: John Rigby <jrigby@freescale.com>
39241 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
39242 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39243 Date: Mon Jan 14 17:43:33 2008 -0600
39245 ColdFire: Add MCF5227x cpu and M52277EVB support-1
39247 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39248 Signed-off by: John Rigby <jrigby@freescale.com>
39250 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
39251 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39252 Date: Mon Jan 14 17:35:44 2008 -0600
39254 ColdFire: Fix CFI Flash low level Read/Write macro
39256 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39257 Signed-off by: John Rigby <jrigby@freescale.com>
39259 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
39260 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39261 Date: Mon Jan 14 17:23:08 2008 -0600
39263 ColdFire: Add M5373EVB platform support - 2
39265 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39266 Signed-off by: John Rigby <jrigby@freescale.com>
39268 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
39269 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39270 Date: Mon Jan 14 17:19:54 2008 -0600
39272 ColdFire: Add M5373EVB platform support - 1
39274 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39275 Signed-off by: John Rigby <jrigby@freescale.com>
39277 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
39278 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39279 Date: Mon Jan 14 17:17:03 2008 -0600
39281 ColdFire: Update FlexBus CS for MCF532x
39283 Definition update and change from 16bit to 32bit
39285 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39286 Signed-off by: John Rigby <jrigby@freescale.com>
39288 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
39289 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39290 Date: Mon Jan 14 17:11:47 2008 -0600
39292 ColdFire: PCI and misc updates for MCF5445x
39294 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39295 Signed-off by: John Rigby <jrigby@freescale.com>
39297 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
39298 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39299 Date: Mon Jan 14 17:06:55 2008 -0600
39301 ColdFire: MCF5445x header files cleanup
39303 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39304 Signed-off by: John Rigby <jrigby@freescale.com>
39306 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
39307 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39308 Date: Mon Jan 14 16:59:42 2008 -0600
39310 ColdFire: MCF532x header files cleanup
39312 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39313 Signed-off by: John Rigby <jrigby@freescale.com>
39315 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
39316 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
39317 Date: Mon Jan 14 15:30:15 2008 -0600
39319 ColdFire: Add modules header files
39321 Add CF specific modules header files
39323 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
39324 Signed-off-by: John Rigby <jrigby@freescale.com>
39326 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
39327 Author: Kim Phillips <kim.phillips@freescale.com>
39328 Date: Thu Jan 17 12:48:00 2008 -0600
39330 codingstyle cleanup for spi driver
39332 ..and rm unused CONFIG_FSL_SPI define
39334 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39336 commit d59feffb42c9f174116db7a82a311df98983dfce
39337 Author: Haiying Wang <Haiying.Wang@freescale.com>
39338 Date: Wed Jan 16 17:12:12 2008 -0500
39340 FSL: Fix common EEPROM_data structure definition
39342 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
39343 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
39346 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
39348 commit 6bee764bd6da510a4aad614880300c968bc7318d
39349 Author: Timur Tabi <timur@freescale.com>
39350 Date: Wed Jan 16 15:48:12 2008 -0600
39352 86xx: enable command-line editing
39354 Enable command-line editing for all MPC86xx boards.
39356 Signed-off-by: Timur Tabi <timur@freescale.com>
39358 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
39359 Author: Ben Warren <biggerbadderben@gmail.com>
39360 Date: Wed Jan 16 22:37:42 2008 -0500
39362 Implement hard SPI driver on MPC8349EMDS
39364 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
39365 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
39367 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39368 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39370 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
39371 Author: Ben Warren <biggerbadderben@gmail.com>
39372 Date: Wed Jan 16 22:37:35 2008 -0500
39374 Add support for a Freescale non-CPM SPI controller
39376 This patch adds support for the SPI controller found on Freescale PowerPC
39377 processors such as the MCP834x family. Additionally, a new config option,
39378 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
39380 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39381 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39383 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
39384 Author: Dave Liu <r63238@freescale.com>
39385 Date: Thu Jan 17 18:23:19 2008 +0800
39387 mpc83xx: Fix the fatal conflict of merge
39389 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
39390 will cause the mpc8315erdb board can't boot up.
39392 The patch fix that bug, and remove the duplicated #ifdef
39393 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
39394 MPC8313E processor.
39396 Signed-off-by: Dave Liu <daveliu@freescale.com>
39397 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39399 commit 3259eeaa4148125a81417477f62c05bd67f60587
39400 Author: Larry Johnson <lrj@acm.org>
39401 Date: Thu Jan 17 08:50:09 2008 -0500
39403 Merge Sequoia beautification into Korat code
39405 Signed-off-by: Larry Johnson <lrj@acm.org>
39407 commit e16925773211291b562e77187061e9dd1d757217
39408 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39409 Date: Thu Jan 17 07:45:05 2008 +0100
39411 net: add 'ethrotate' environment variable
39413 [PATCH] net: add 'ethrotate' environment variable
39415 This patch replaces the buildtime configuration option
39416 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
39417 configuration veriable. See README.
39419 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39420 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39422 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
39423 Author: Stefan Roese <sr@denx.de>
39424 Date: Thu Jan 17 14:29:04 2008 +0100
39426 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
39428 Signed-off-by: Stefan Roese <sr@denx.de>
39430 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
39431 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39432 Date: Thu Jan 17 18:07:32 2008 +0900
39434 sh: Remove CONFIG_COMMANDS from MS7720SE config file
39436 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39438 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
39439 Author: Niklaus Giger <niklaus.giger@netstal.com>
39440 Date: Wed Jan 16 18:39:20 2008 +0100
39442 ppc4xx: Netstal HCU4 board: added various fixes and POST
39444 - Moved some common code to netstal/common/nm_bsp.c.
39445 - sdram initialisation goes go netstal/common/fixed_sdram.c.
39446 - Added support for POST.
39447 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
39449 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
39451 commit 69b0634a4ee98c9791815600d43b99f626a952f3
39452 Author: Niklaus Giger <niklaus.giger@netstal.com>
39453 Date: Thu Jan 17 12:53:56 2008 +0100
39455 ppc4xx: netstal/common define routines used by all boards
39457 Added some routines used by all Netstal boards:
39458 - nm_bsp.c: - nm_show_print and
39459 - common_misc_init_r
39460 - set_params_for_sw_install. Very specific code to handle our SW
39461 installation procedure
39462 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
39463 to handle sdram initialization.
39464 - nm.h: Common header
39466 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
39468 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
39469 Author: Niklaus Giger <niklaus.giger@netstal.com>
39470 Date: Wed Jan 16 18:39:18 2008 +0100
39472 ppc4xx: Netstal HCU5 board: added various fixes and POST
39474 - Moved some common code to nestal/common/nm_bsp.c.
39475 - Added support for the vxWorks EDR.
39476 - Enable trace for Lauterbach, if present.
39477 - Added support for POST.
39478 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
39480 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
39482 commit 4371090e5da77edc7bf9f296364db4801639d9c4
39483 Author: Niklaus Giger <niklaus.giger@netstal.com>
39484 Date: Wed Jan 16 18:39:08 2008 +0100
39486 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
39489 - Reduced rom_size from 384 to 320 kB
39490 - Environment is now in flash
39494 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
39496 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
39497 Author: Niklaus Giger <niklaus.giger@netstal.com>
39498 Date: Wed Jan 16 18:37:50 2008 +0100
39500 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
39503 - Reduced rom_size from 384 to 320 kB
39504 - Environment is now in flash
39508 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
39510 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
39511 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39512 Date: Thu Jan 17 10:53:08 2008 +0100
39514 ppc4xx: Complete DU440 board support
39516 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39518 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
39519 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39520 Date: Thu Jan 17 10:52:30 2008 +0100
39522 ppc4xx: Add DU440 board support
39524 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39526 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
39527 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39528 Date: Thu Jan 17 15:53:52 2008 +0900
39530 sh: Update SuperH SCIF driver
39532 This patch fixed wrong SH7720 CPU macro and changed macro that
39533 calculated value of SCBRR register.
39535 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
39537 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
39538 Author: Grzegorz Bernacki <gjb@semihalf.com>
39539 Date: Wed Jan 16 15:12:47 2008 +0100
39541 Set ips dividor to 1/4 of csb clock.
39543 Previous setting cause ips clock to be out of spec. This bug was found by John
39544 Rigby from Freescale.
39546 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
39548 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
39549 Author: Kumar Gala <galak@kernel.crashing.org>
39550 Date: Thu Jan 17 02:19:18 2008 -0600
39552 85xx: Get ride of old TLB setup code
39554 Now that all boards have been converted, remove old config code and the
39555 config option for the new style.
39557 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39559 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
39560 Author: Kumar Gala <galak@kernel.crashing.org>
39561 Date: Thu Jan 17 02:02:10 2008 -0600
39563 85xx: Convert TQM85xx to new TLB setup
39565 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39567 commit 74121b470c14f7eaf284ee838bffca6f9521069e
39568 Author: Kumar Gala <galak@kernel.crashing.org>
39569 Date: Thu Jan 17 01:56:32 2008 -0600
39571 85xx: Convert STXGP3 & STXSSA to new TLB setup
39573 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39575 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
39576 Author: Kumar Gala <galak@kernel.crashing.org>
39577 Date: Thu Jan 17 01:44:34 2008 -0600
39579 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
39581 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39583 commit 818218bac6a11591e2542c344d2330e0f4e1968b
39584 Author: Kumar Gala <galak@kernel.crashing.org>
39585 Date: Thu Jan 17 01:31:34 2008 -0600
39587 85xx: Convert PM854/PM856 to new TLB setup
39589 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39591 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
39592 Author: Kumar Gala <galak@kernel.crashing.org>
39593 Date: Thu Jan 17 01:25:33 2008 -0600
39595 85xx: Convert MPC8540EVAL to new TLB setup
39597 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39599 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
39600 Author: Kumar Gala <galak@kernel.crashing.org>
39601 Date: Thu Jan 17 01:12:22 2008 -0600
39603 85xx: Convert MPC8568 MDS to new TLB setup
39605 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39607 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
39608 Author: Kumar Gala <galak@kernel.crashing.org>
39609 Date: Thu Jan 17 01:01:09 2008 -0600
39611 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
39613 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39615 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
39616 Author: Kumar Gala <galak@kernel.crashing.org>
39617 Date: Thu Jan 17 00:52:29 2008 -0600
39619 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
39621 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39623 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
39624 Author: Kumar Gala <galak@kernel.crashing.org>
39625 Date: Thu Jan 17 00:32:17 2008 -0600
39627 85xx: Convert ATUM8548 to new TLB setup
39629 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39631 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
39632 Author: Kumar Gala <galak@kernel.crashing.org>
39633 Date: Wed Jan 16 23:11:57 2008 -0600
39635 85xx: Convert MPC8544 DS to new TLB setup
39637 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39639 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
39640 Author: Kumar Gala <galak@kernel.crashing.org>
39641 Date: Wed Jan 16 22:38:34 2008 -0600
39643 85xx: Reworked initial processor init
39645 Reworked the initial processor initialzation sequence:
39646 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
39647 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
39648 * Reworked initial asm code to do most of the core init before TLBs
39650 The main reasons for these changes are to allow handling of 36-bit phys
39651 addresses in the future and some of the issues that will exist when we
39654 There are a few caveats on what can be initialized via the LAW and TLB
39656 * TLB entry 14/15 can't be initialized via the TLB table
39657 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
39658 the code that is currently executing.
39660 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39662 commit 44a23cfd6360a68eaa41f945190618a55519eac3
39663 Author: Kumar Gala <galak@kernel.crashing.org>
39664 Date: Wed Jan 16 22:33:22 2008 -0600
39666 85xx: Introduce new tlb API
39668 Add a set of functions to manipulate TLB entries:
39669 * set_tlb() - write a tlb entry
39670 * invalidate_tlb() - invalidate a tlb array
39671 * disable_tlb() - disable a variable size tlb entry
39672 * init_tlbs() - setup initial tlbs based on static table
39674 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39676 commit be88b1699863c262818f3af7f60173b4d48df8fc
39677 Author: Stefan Roese <sr@denx.de>
39678 Date: Thu Jan 17 07:50:17 2008 +0100
39680 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
39682 Signed-off-by: Stefan Roese <sr@denx.de>
39684 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
39685 Author: Kumar Gala <galak@kernel.crashing.org>
39686 Date: Wed Jan 16 10:04:42 2008 -0600
39688 85xx: Use proper defines for PCI addresses
39690 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
39691 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
39692 be used for configuring the PCI ATMU.
39694 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39696 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
39697 Author: Kumar Gala <galak@kernel.crashing.org>
39698 Date: Wed Jan 16 09:22:29 2008 -0600
39700 85xx: Remove old style of LAW init
39702 All boards are now using the new fsl_law code so we can drop the old version.
39704 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39706 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
39707 Author: Kumar Gala <galak@kernel.crashing.org>
39708 Date: Wed Jan 16 09:15:29 2008 -0600
39710 85xx: convert remaining 85xx boards over to use new LAW init code
39712 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
39713 to use new LAW init code.
39715 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39717 commit 572b13afc42710f2957c382a710360429c0e099b
39718 Author: Kumar Gala <galak@kernel.crashing.org>
39719 Date: Wed Jan 16 09:11:53 2008 -0600
39721 85xx: convert STXGP3/STXSSA over to use new LAW init code
39723 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39725 commit 45f2166ac0233a9263058378f39612bd11f61196
39726 Author: Kumar Gala <galak@kernel.crashing.org>
39727 Date: Wed Jan 16 09:06:48 2008 -0600
39729 85xx: convert PM854/PM856 over to use new LAW init code
39731 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39733 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
39734 Author: Kumar Gala <galak@kernel.crashing.org>
39735 Date: Wed Jan 16 09:05:27 2008 -0600
39737 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
39739 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39741 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
39742 Author: Kumar Gala <galak@kernel.crashing.org>
39743 Date: Wed Jan 16 01:45:10 2008 -0600
39745 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
39747 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39749 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
39750 Author: Kumar Gala <galak@kernel.crashing.org>
39751 Date: Wed Jan 16 01:32:06 2008 -0600
39753 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
39755 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39757 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
39758 Author: Kumar Gala <galak@kernel.crashing.org>
39759 Date: Wed Jan 16 01:16:16 2008 -0600
39761 85xx: convert MPC8544 DS over to use new LAW init code
39763 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39765 commit 83d40dfd79fe868796275802f60116d84b9e4395
39766 Author: Kumar Gala <galak@kernel.crashing.org>
39767 Date: Wed Jan 16 01:13:58 2008 -0600
39769 85xx: Move LAW init code into C
39771 Move the initialization of the LAWs into C code and provide an API
39772 to allow modification of LAWs after init.
39774 Board code is responsible to provide a law_table and num_law_entries.
39776 We should be able to use the same code on 86xx as well.
39778 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39780 commit bed8ce838a609aaab136d43b25e6df2a520bc854
39781 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39782 Date: Sat Dec 22 15:03:12 2007 +0100
39784 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
39786 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39788 commit 0764c164fed6277d359cf132d55187ea34290114
39789 Author: Vlad Lungu <vlad@comsys.ro>
39790 Date: Wed Jan 16 19:27:51 2008 +0200
39792 MIPS:Target support for qemu -M mips
39794 With serial, NE2000, IDE support. Tested in big-endian mode.
39795 Memory size hard-coded to 128M for now, so don't play with
39798 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
39800 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
39801 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39802 Date: Fri Jan 11 00:01:37 2008 +0100
39804 Fix nfs command help to reflect that the serverip is optional
39806 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39807 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39809 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
39810 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39811 Date: Mon Dec 10 22:32:14 2007 +0100
39813 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
39815 and move is_valid_ether_addr board file
39817 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
39818 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39820 commit c2f896b8fc4722e36915903e1942e138e68ce804
39821 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
39822 Date: Wed Jan 16 16:13:31 2008 +0900
39824 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
39826 rx_status on the memory is basically in LE, but needs to be handled in CPU
39827 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
39830 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
39831 Cc: Masami Komiya <mkomiya@sonare.it>
39832 Cc: Lucas Jin <lucasjin@gmail.com>
39833 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39835 commit 96a236746fe6a7b84802afb4ed31536696d34812
39836 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
39837 Date: Wed Jan 16 16:12:26 2008 +0900
39839 drivers/net/rtl8139.c: Fix cache coherency issues
39841 Current driver is meant for cache coherent systems. This patch adds
39842 flush_cache() routines to support cache non-coherent systems.
39844 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
39845 Cc: Masami Komiya <mkomiya@sonare.it>
39846 Cc: Lucas Jin <lucasjin@gmail.com>
39847 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39849 commit d1276c76c1e2b5035296689280ba1acb2c425104
39850 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
39851 Date: Wed Jan 16 16:11:14 2008 +0900
39853 drivers/net/rtl8139.c: Fix tx timeout
39855 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
39856 does, the condition "(currticks() < to)" becomes invalid and immediately
39857 leads to tx timeout error. This patch introduces the fine-graded udely(10)
39858 loops to ease the impact of wrapping around.
39860 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
39861 Cc: Masami Komiya <mkomiya@sonare.it>
39862 Cc: Lucas Jin <lucasjin@gmail.com>
39863 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39865 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
39866 Author: Dave Liu <r63238@freescale.com>
39867 Date: Fri Jan 11 18:45:28 2008 +0800
39869 TSEC: Add the support for RealTek RTL8211B PHY
39871 Add the support of RealTek RTL8211B PHY, the RTL8211B
39872 PHY only supports RGMII and MII mode.
39874 Signed-off-by: Dave Liu <daveliu@freescale.com>
39875 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39877 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
39878 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
39879 Date: Wed Jan 16 09:40:41 2008 +0100
39881 Remove annoying debug printout for PHY less boards.
39883 PHY less board prints out lots of "read wrong ...":
39884 read wrong value : mii_id 3,mii_reg 2, base e0102320
39885 read wrong value : mii_id 3,mii_reg 3, base e0102320
39886 UEC: PHY is Generic MII (ffffffff)
39887 read wrong value : mii_id 3,mii_reg 4, base e0102320
39888 read wrong value : mii_id 3,mii_reg 0, base e0102320
39889 read wrong value : mii_id 3,mii_reg 1, base e0102320
39890 read wrong value : mii_id 3,mii_reg 1, base e0102320
39891 read wrong value : mii_id 3,mii_reg 5, base e0102320
39892 read wrong value : mii_id 3,mii_reg 1, base e0102320
39893 read wrong value : mii_id 3,mii_reg 1, base e0102320
39894 read wrong value : mii_id 3,mii_reg 5, base e0102320
39895 FSL UEC0: Full Duplex
39896 FSL UEC0: Speed 100BT
39897 FSL UEC0: Link is up
39898 Using FSL UEC0 device
39900 Make this printout depend on UEC_VERBOSE_DEBUG and
39901 remove its definition in uec_phy.c
39903 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
39904 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39906 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
39907 Author: Kim Phillips <kim.phillips@freescale.com>
39908 Date: Tue Jan 15 14:11:00 2008 -0600
39910 net: reduce boot latency on QE UEC based boards
39912 actually polling for PHY autonegotiation to finish enables us to remove the
39913 5 second boot prompt latency present on QE based boards.
39915 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
39916 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
39917 code shamelessly stolen from tsec driver.
39919 also rm unused CONFIG_RMII_MODE code.
39921 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39922 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
39923 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39925 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
39926 Author: michael.firth@bt.com <michael.firth@bt.com>
39927 Date: Wed Jan 16 11:40:51 2008 +0000
39929 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
39931 The current TSEC driver limits MDIO access to the devices that have been configured as attached
39932 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
39934 Signed-off-by: Michael Firth <michael.firth@bt.com>
39935 Acked-by: Andy Fleming <afleming@freescale.com>
39936 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
39938 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
39939 Author: Kim Phillips <kim.phillips@freescale.com>
39940 Date: Wed Jan 16 00:38:05 2008 -0600
39942 Add support for the MPC837xERDB
39944 MPC837xERDB board support includes:
39945 * DDR2 330MHz hardcoded (soldered on the board)
39946 * Local Bus NOR Flash
39947 * I2C, UART and RTC
39948 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
39949 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
39952 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
39953 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
39954 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39956 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
39957 Author: Kim Phillips <kim.phillips@freescale.com>
39958 Date: Wed Jan 16 12:06:16 2008 -0600
39960 mpc83xx: add support for more system clock performance controls
39962 System registers that are modified are the Arbiter Configuration
39963 Register (ACR), the System Priority Control Register (SPCR), and the
39964 System Clock Configuration Register (SCCR).
39966 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
39967 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
39968 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39970 commit 16c3cde050e2d243e62b37486f1558570787beb8
39971 Author: James Yang <james.yang@freescale.com>
39972 Date: Wed Jan 16 11:58:08 2008 -0600
39974 FSL: Generalize PIXIS reset command parsing.
39976 Before, the order of arguments to the pixis_reset
39977 command needed to be supplied in a hard-coded order.
39978 Generalize the command parsing to allow any order.
39980 Signed-off-by: James Yang <james.yang@freescale.com>
39981 Acked-by: Jon Loeliger <jdl@freescale.com>
39983 commit ad8f8687b78c3e917b173f038926695383c55555
39984 Author: Jon Loeliger <jdl@freescale.com>
39985 Date: Tue Jan 15 13:42:41 2008 -0600
39987 FSL: Convert board/freescale/common/Makefile to use CONFIG_
39989 Convert the board/freescale/common/Makefile to use
39990 CONFIG_* options to select which files to conditionally
39991 compile into the board/freescale/common library rather
39992 than conditionally compiling entire files.
39999 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
40001 Signed-off-by: Jon Loeliger <jdl@freescale.com>
40003 commit 7c2221eb230372a9e537c4f6636b147b0909325f
40004 Author: Roy Zang <tie-fei.zang@freescale.com>
40005 Date: Tue Jan 15 16:38:38 2008 +0800
40007 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
40009 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
40010 Remove unused ethernet CONFIG_ options.
40012 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
40013 Acked-by: Jon Loeliger <jdl@freescale.com>
40015 commit 711a7946277d2e29af481011e8635e9975c54e45
40016 Author: Kim Phillips <kim.phillips@freescale.com>
40017 Date: Tue Jan 15 14:05:14 2008 -0600
40019 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
40021 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
40023 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40025 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
40026 Author: Kim Phillips <kim.phillips@freescale.com>
40027 Date: Tue Jan 15 09:51:12 2008 -0600
40029 mpc83xx: clean up mpc8360emds.c warnings
40031 mpc8360emds.c: In function 'ft_board_setup':
40032 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
40033 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
40034 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
40035 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
40036 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
40037 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
40039 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40041 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
40042 Author: Kim Phillips <kim.phillips@freescale.com>
40043 Date: Mon Jan 14 16:14:46 2008 -0600
40045 mpc83xx: fix phy-connection-type fixup code
40047 use tree passed to us in local blob, not global fdt.
40049 Also use fdt_path_offset to convert to relative offset, since absolute
40050 reference is needed to check for rgmii-id mode string value.
40052 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40054 commit 2b4c952be7c4357a13e839d48df80853820c33eb
40055 Author: Kumar Gala <galak@kernel.crashing.org>
40056 Date: Mon Jan 14 09:01:40 2008 -0600
40058 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
40060 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40061 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40063 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
40064 Author: Poonam Aggrwal <b10812@freescale.com>
40065 Date: Mon Jan 14 09:41:14 2008 +0530
40067 Changes in uboot DDR configuration for MPC8313eRDB
40069 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
40070 DDR configuration in u-boot code. Some are related to performance, some
40071 affect stability and some correct few basic errors in the current
40074 The changes have been tested and found to give better memory latency
40075 figures on MPC8313eRDB.LMBench figures prove it.
40079 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
40080 (this may improve performance for application with many read
40081 or write to open pages).
40082 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
40083 001 (activating all the CS when only one is used may cause
40084 unwanted noise on the system)
40086 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
40088 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
40090 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
40091 comply with the 3 ODT clk requirements)
40092 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
40093 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
40095 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
40096 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
40098 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
40099 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
40101 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
40102 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
40104 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
40105 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
40106 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
40107 Cc: Josep P J <PJ.Joseph@freescale.com>
40108 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40110 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
40111 Author: Jerry Van Baren <gvb.uboot@gmail.com>
40112 Date: Sat Jan 12 13:24:14 2008 -0500
40114 Enable the isdram command on the MPC8360EMDS board
40116 The isdram command prints out decoded information the "serial presence
40117 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
40118 debugging memory configuration problems.
40120 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
40121 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40123 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
40124 Author: Dave Liu <r63238@freescale.com>
40125 Date: Fri Jan 11 18:48:24 2008 +0800
40127 mpc83xx: Add the support for MPC8315ERDB board
40130 - Boot from NOR Flash
40131 - DDR2 266MHz hardcoded configuration
40132 - Local bus NOR Flash R/W operation
40133 - I2C, UART, MII and RTC
40137 Signed-off-by: Dave Liu <daveliu@freescale.com>
40138 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40140 commit b05884efa614e4d8a9413158fc228e0dc02ab704
40141 Author: Dave Liu <r63238@freescale.com>
40142 Date: Fri Jan 11 18:46:50 2008 +0800
40144 mpc83xx: Add config of eTSEC emergency priority in SPCR
40146 The TSEC emergency priority definition of 831x/837x
40147 is different than the definition of 834x in SPCR register.
40149 Add the other config of TSEC emergency priority into
40152 Signed-off-by: Dave Liu <daveliu@freescale.com>
40153 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40155 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
40156 Author: Dave Liu <r63238@freescale.com>
40157 Date: Fri Jan 11 18:42:19 2008 +0800
40159 mpc83xx: Remove cache config from MPC8360ERDK.h
40161 The MPC8360ERDK board support patch is added before
40162 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
40163 so, miss clean up it.
40165 The patch clean up the miss cache config.
40167 Signed-off-by: Dave Liu <daveliu@freescale.com>
40168 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40170 commit cd9d23053d435c08fc8695017b5cb9003fcda786
40171 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
40172 Date: Mon Jan 14 23:09:32 2008 +0300
40174 nand: FSL UPM NAND driver
40176 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
40178 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
40179 Author: Kyungmin Park <kmpark@infradead.org>
40180 Date: Tue Jan 15 08:59:44 2008 +0900
40182 OneNAND: Separate U-Boot dependent code from OneNAND
40184 OneNAND: Separate U-Boot dependent code from OneNAND
40186 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
40188 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
40189 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40190 Date: Wed Jan 16 10:33:46 2008 +0100
40192 ppc4xx: Sequoia coding style cleanup and beautification
40194 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40196 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
40197 Author: Larry Johnson <lrj@acm.org>
40198 Date: Tue Jan 15 14:35:58 2008 -0500
40200 ppc4xx: Refactor ECC POST for AMCC Denali core
40202 The ECC POST reported intermittent failures running after power-up on
40203 the Korat PPC440EPx board. Even when the test passed, the debugging
40204 output occasionally reported additional unexpected ECC errors.
40206 This refactoring has three main objectives: (1) minimize the code
40207 executed with ECC enabled during the tests, (2) add more checking of the
40208 results so any unexpected ECC errors would cause the test to fail, and
40209 (3) use synchronization (only) where required by the processor.
40211 Signed-off-by: Larry Johnson <lrj@acm.org>
40213 commit 2465665b73ac2f688af945b1ed510752afa816a4
40214 Author: David Saada <David.Saada@ecitele.com>
40215 Date: Tue Jan 15 10:40:24 2008 +0200
40217 QE UEC: Extend number of supported UECs to 4
40219 This patch extends the number of supported UECs to 4. Note that the
40220 problem of QE thread resources exhaustion is resolved by setting the
40221 correct number of QE threads according to Ethernet type (GBE or FE).
40223 Signed-off-by: David Saada <david.saada@ecitele.com>
40224 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
40226 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
40227 Author: Wolfgang Denk <wd@denx.de>
40228 Date: Wed Jan 16 00:01:01 2008 +0100
40230 LWMON5: enable hush shell as command line parser
40232 Signed-off-by: Wolfgang Denk <wd@denx.de>
40234 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
40235 Author: Wolfgang Denk <wd@denx.de>
40236 Date: Tue Jan 15 17:22:28 2008 +0100
40238 ADS5121: disable watchdog; enable image timestamps
40240 Signed-off-by: Wolfgang Denk <wd@denx.de>
40242 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
40243 Author: Wolfgang Denk <wd@denx.de>
40244 Date: Tue Jan 15 17:21:28 2008 +0100
40246 TK885D: fixes for bigger flash sector sizes on new modules;
40247 adjust default environment;
40248 disable SCC ethernet (not used on this board).
40250 Signed-off-by: Wolfgang Denk <wd@denx.de>
40252 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
40253 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40254 Date: Tue Jan 15 17:48:13 2008 +0900
40256 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
40258 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40260 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
40261 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40262 Date: Tue Jan 15 23:25:25 2008 +0900
40264 sh: Add support SH7710/SH7712
40266 SH7710/SH7712 of SH3 CPU are supported.
40267 SH771X is called SH-Ether, and has the Ether controller in CPU.
40268 The driver of Ether is not included in this patch.
40270 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40272 commit 63a11be68306870e04d3851ed9fa41955cdf4894
40273 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40274 Date: Tue Jan 15 23:06:17 2008 +0900
40276 sh: Add support of map_physmem() and unmap_physmem() to SuperH
40278 This patch add the support of map_physmem() and unmap_physmem()
40279 used with Common Flash Interface(CFI) driver.
40281 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40283 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
40284 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40285 Date: Wed Jan 9 14:42:27 2008 +0900
40287 sh: Add maintainer of MS7720SE to the MAINTAINER file
40289 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40291 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
40292 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40293 Date: Wed Jan 9 14:39:58 2008 +0900
40295 sh: Fix board name in MS7720SE's config.mk
40297 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40299 commit c0a04d93734d768b39dbb72fb501b65614c8615d
40300 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40301 Date: Wed Jan 9 14:37:36 2008 +0900
40303 sh: Add MS7720SE to MAKEALL
40305 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40307 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
40308 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
40309 Date: Mon Dec 3 22:58:50 2007 +0900
40311 sh: Add support for MS7720RP02 board
40313 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
40314 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40315 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40317 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
40318 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
40319 Date: Wed Jan 9 14:30:02 2008 +0900
40321 sh: Add support for SH7720 in serial_sh driver.
40323 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
40324 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40325 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40327 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
40328 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
40329 Date: Mon Dec 3 22:58:45 2007 +0900
40331 sh: Add support SH3 and SH7720
40333 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
40334 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40335 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
40337 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
40338 Author: Stefan Roese <sr@denx.de>
40339 Date: Tue Jan 15 10:11:02 2008 +0100
40341 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
40343 Signed-off-by: Stefan Roese <sr@denx.de>
40345 commit 17bef68097ab3692500a36fb31115bff7910aa99
40346 Author: Niklaus Giger <niklausgiger@gmx.ch>
40347 Date: Mon Jan 14 14:04:42 2008 +0100
40349 ppc_4xx: Fix post spr.c for PPC405
40351 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
40352 for PPC440 and derivates processor.
40354 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
40356 commit 06c428bcd4413014b43236e77765022071424fa6
40357 Author: Dave Liu <r63238@freescale.com>
40358 Date: Mon Jan 14 11:12:01 2008 +0800
40360 QE: fix compile warning
40362 qe.c: In function 'qe_upload_firmware':
40363 qe.c:390: warning: pointer targets in passing argument 2
40364 uec.c: In function 'uec_initialize':
40365 uec.c:1236: warning: 'uec_info' may be used uninitialized
40367 Signed-off-by: Dave Liu <daveliu@freescale.com>
40369 commit a0dd99d51efa55fe023e19c97ead92683725eb11
40370 Author: Stefan Roese <sr@denx.de>
40371 Date: Mon Jan 14 10:05:05 2008 +0100
40373 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
40375 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
40376 to remove the USB PHY reset after powerup. The CPLD will keep the
40377 USB PHY in reset (active low) until the bit is set to 1 in
40378 board_early_init_f().
40380 Signed-off-by: Stefan Roese <sr@denx.de>
40382 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
40383 Author: Wolfgang Denk <wd@denx.de>
40384 Date: Sun Jan 13 23:26:45 2008 +0100
40386 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
40388 Signed-off-by: Wolfgang Denk <wd@denx.de>
40390 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
40391 Author: Wolfgang Denk <wd@denx.de>
40392 Date: Sun Jan 13 23:37:50 2008 +0100
40394 ADS5121: Fix typo in ads5121.c, adjust default environment
40396 Signed-off-by: Wolfgang Denk <wd@denx.de>
40398 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
40399 Author: John Rigby <jrigby@freescale.com>
40400 Date: Fri Aug 24 18:18:43 2007 -0600
40402 ADS5121: MAX slew rate for PATA pins
40404 Signed-off-by: John Rigby <jrigby@freescale.com>
40406 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
40407 Author: Wolfgang Denk <wd@denx.de>
40408 Date: Sun Jan 13 21:05:52 2008 +0100
40410 Fix Makefile dependency problem with parallel builds.
40412 Signed-off-by: Wolfgang Denk <wd@denx.de>
40414 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
40415 Author: Wolfgang Denk <wd@denx.de>
40416 Date: Sun Jan 13 19:51:39 2008 +0100
40418 MPC8544DS: fix board Makefile for silent build (with -s)
40420 Signed-off-by: Wolfgang Denk <wd@denx.de>
40422 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
40423 Author: Wolfgang Denk <wd@denx.de>
40424 Date: Sun Jan 13 16:44:08 2008 +0100
40426 PMC440 board: fix board Makefile for out-of-tree building
40428 Signed-off-by: Wolfgang Denk <wd@denx.de>
40430 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
40431 Author: Wolfgang Denk <wd@denx.de>
40432 Date: Sun Jan 13 16:07:44 2008 +0100
40434 Makalu: fix compile warning
40436 Signed-off-by: Wolfgang Denk <wd@denx.de>
40438 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
40439 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40440 Date: Sun Jan 13 12:36:12 2008 +0100
40442 cmd_nand : fix compiler warning.
40444 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40446 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
40447 Author: Michael Schwingen <rincewind@discworld.dascon.de>
40448 Date: Sat Jan 12 20:29:47 2008 +0100
40450 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
40452 Signed-off-by: Michael Schwingen <michael@schwingen.org>
40453 Acked-by: Stefan Roese <sr@denx.de>
40455 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
40456 Author: Wolfgang Denk <wd@denx.de>
40457 Date: Sun Jan 13 02:19:44 2008 +0100
40459 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
40461 Signed-off-by: Wolfgang Denk <wd@denx.de>
40463 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
40464 Author: Wolfgang Denk <wd@denx.de>
40465 Date: Sun Jan 13 02:19:13 2008 +0100
40467 MPC8xx FEC driver: fix compiler warning.
40469 Signed-off-by: Wolfgang Denk <wd@denx.de>
40471 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
40472 Author: Wolfgang Denk <wd@denx.de>
40473 Date: Sun Jan 13 00:59:21 2008 +0100
40475 Fix Makefile dependencies issues; allow silent build
40477 - get rid of "version" target whichdidn't really work
40478 - make autoconf.mk depend on version_autogenerated.h to make sure
40479 to rebuild files as needed
40480 - add XECHO macro to allow for silent build using "make -s"
40482 Signed-off-by: Wolfgang Denk <wd@denx.de>
40484 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
40485 Author: Wolfgang Denk <wd@denx.de>
40486 Date: Sun Jan 13 00:55:47 2008 +0100
40488 ADS5121e: fix compile warning
40490 Signed-off-by: Wolfgang Denk <wd@denx.de>
40492 commit f2b6f4610627fe3d607620e25082916a01538875
40493 Author: Wolfgang Denk <wd@denx.de>
40494 Date: Sun Jan 13 00:55:18 2008 +0100
40496 MUNICes: fix board Makefile for remote build directory
40498 Signed-off-by: Wolfgang Denk <wd@denx.de>
40500 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
40501 Author: Oliver Weber <almoeli@gmx.de>
40502 Date: Wed Jan 9 17:04:38 2008 +0100
40504 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
40506 Signed-off-by: Oliver Weber <almoeli@gmx.de>
40508 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
40509 Author: Andreas Engel <andreas.engel@ericsson.com>
40510 Date: Wed Jan 9 17:10:56 2008 +0100
40512 Make bootretry work when command line editing is enabled
40514 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
40515 This patch fixes the problem.
40517 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
40519 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
40520 Author: Larry Johnson <lrj@acm.org>
40521 Date: Fri Jan 11 23:26:18 2008 -0500
40523 Refactor code for "i2c sdram" command
40525 Signed-off-by: Larry Johnson <lrj@acm.org>
40527 commit 0df6b8446c4721b91ce311548114891130371083
40528 Author: Larry Johnson <lrj@acm.org>
40529 Date: Thu Jan 10 22:23:39 2008 -0500
40531 Fix "i2c sdram" command for DDR2 DIMMs
40533 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
40534 "i2c sdram" command. This patch provides correct alternative
40535 interpretations when DDR2 memory is detected.
40537 Signed-off-by: Larry Johnson <lrj@acm.org>
40539 commit 64134f011254123618798ff77c42ba196b2ec485
40540 Author: Wolfgang Denk <wd@denx.de>
40541 Date: Sat Jan 12 20:31:39 2008 +0100
40543 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
40545 With recent toolchain versions, some boards would not build because
40546 or errors like this one (here for ocotea board when building with
40548 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
40550 For many boards, the .bss section is big enough that it wraps around
40551 at the end of the address space (0xFFFFFFFF), so the problem will not
40552 be visible unless you use a 64 bit tool chain for development. On
40553 some boards however, changes to the code size (due to different
40554 optimizations) we bail out with section overlaps like above.
40556 The fix is to add the NOLOAD attribute to the .bss and .sbss
40557 sections, telling the linker that .bss does not consume any space in
40560 Signed-off-by: Wolfgang Denk <wd@denx.de>
40562 commit 3afac79ec27b91df185f090b31dad9620779f440
40563 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
40564 Date: Fri Jan 11 20:42:58 2008 -0600
40566 USB: Add Philips 1561 PCI-OHCI ids
40567 (needed for M5475EVB)
40569 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
40571 commit 5e8def6731cd7bec74bff42a16b139de04010353
40572 Author: Wolfgang Denk <wd@denx.de>
40573 Date: Sat Jan 12 15:51:34 2008 +0100
40575 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
40578 Signed-off-by: Heiko Schocher <hs@denx.de>
40579 Signed-off-by: Wolfgang Denk <wd@denx.de>
40581 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
40582 Author: Grzegorz Bernacki <gjb@semihalf.com>
40583 Date: Fri Jan 11 12:03:43 2008 +0100
40585 MPC512X: Cleanup bus clock names.
40587 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
40589 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
40590 Author: Grzegorz Bernacki <gjb@semihalf.com>
40591 Date: Tue Jan 8 17:16:59 2008 +0100
40593 MPC512X: Fixed typo in macro name.
40595 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
40597 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
40598 Author: Grzegorz Bernacki <gjb@semihalf.com>
40599 Date: Tue Jan 8 17:16:15 2008 +0100
40601 ads5121: Added support for FDT.
40603 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
40605 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
40606 Author: Wolfgang Denk <wd@denx.de>
40607 Date: Sat Jan 12 01:05:50 2008 +0100
40609 Coding Style cleanup; update CHANGELOG.
40611 Signed-off-by: Wolfgang Denk <wd@denx.de>
40613 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
40614 Author: Heiko Schocher <hs@denx.de>
40615 Date: Fri Jan 11 15:15:17 2008 +0100
40617 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
40619 Signed-off-by: Timur Tabi <timur@freescale.com>
40620 Signed-off-by: Heiko Schocher <hs@denx.de>
40622 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
40623 Author: Heiko Schocher <hs@denx.de>
40624 Date: Fri Jan 11 15:15:16 2008 +0100
40626 MUNICes: Set the right CFG_DEFAULT_MBAR value.
40628 Signed-off-by: Heiko Schocher <hs@denx.de>
40630 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
40631 Author: Heiko Schocher <hs@denx.de>
40632 Date: Fri Jan 11 15:15:15 2008 +0100
40634 added the config File for the MUNICes board.
40636 Signed-off-by: Heiko Schocher <hs@denx.de>
40638 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
40639 Author: Heiko Schocher <hs@denx.de>
40640 Date: Fri Jan 11 15:15:14 2008 +0100
40642 added basic support for the MUNICes board.
40644 Signed-off-by: Heiko Schocher <hs@denx.de>
40646 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
40647 Author: Wolfgang Denk <wd@denx.de>
40648 Date: Sat Jan 12 00:39:37 2008 +0100
40650 Update CHANGELOG and MAINTAINERS files.
40652 Signed-off-by: Wolfgang Denk <wd@denx.de>
40654 commit 5ba7390c3cb579172be66888a371707b47b5be4e
40655 Author: Anatolij Gustschin <agust@denx.de>
40656 Date: Fri Jan 11 02:15:02 2008 +0100
40658 Fix compilation problem in common/cmd_bmp.c
40660 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
40661 isn't defined. This patch fix this.
40663 Signed-off-by: Anatolij Gustschin <agust@denx.de>
40665 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
40666 Author: Heiko Schocher <hs@denx.de>
40667 Date: Fri Jan 11 01:12:09 2008 +0100
40669 Fix defaultconfig for the mgcoge board.
40671 Signed-off-by: Heiko Schocher <hs@denx.de>
40673 commit ac9db066b26935f31bff15c98168b19faeb603f3
40674 Author: Heiko Schocher <hs@denx.de>
40675 Date: Fri Jan 11 01:12:08 2008 +0100
40677 Added support for the mgcoge board from keymile.
40679 Signed-off-by: Heiko Schocher <hs@denx.de>
40681 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
40682 Author: Heiko Schocher <hs@denx.de>
40683 Date: Fri Jan 11 01:12:07 2008 +0100
40685 Enable SMC microcode relocation patch for SMC1.
40687 Signed-off-by: Heiko Schocher <hs@denx.de>
40689 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
40690 Author: Heiko Schocher <hs@denx.de>
40691 Date: Fri Jan 11 01:12:06 2008 +0100
40693 Added support for the mgsuvd board from keymile.
40695 Signed-off-by: Heiko Schocher <hs@denx.de>
40697 commit bf05293973b348f6946c9df92cd3c65ece42d0be
40698 Author: James Yang <james.yang@freescale.com>
40699 Date: Thu Jan 10 16:02:07 2008 -0600
40701 Fix 64-bit vsprintf.
40703 There were some size and unsigned problems.
40704 Also add support for "ll" size modifier in format string like glibc
40706 Signed-off-by: James Yang <James.Yang@freescale.com>
40707 Acked-by: Jon Loeliger <jdl@freescale.com>
40709 commit 92fa37eac530860643afa26ae347af3d23d67309
40710 Author: Larry Johnson <lrj@acm.org>
40711 Date: Wed Jan 9 12:42:35 2008 -0500
40713 Remove superfluous preprocessor conditionals from LM73 driver
40715 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
40717 (2) Use conditional Makefile.o.
40719 Signed-off-by: Larry Johnson <lrj@acm.org>
40721 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
40722 Author: Guennadi Liakhovetski <lg@denx.de>
40723 Date: Thu Jan 10 17:59:07 2008 +0100
40725 Add support for the TK885D baseboard from TELE-DATA
40727 The TK885D board uses a TQM885D module from TQ, this port adds an
40728 own configuration file and adds a last_stage_init() method to
40729 configure the two PHYs, depending on the phy_auto_nego environment
40732 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
40734 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
40735 Author: Kumar Gala <galak@kernel.crashing.org>
40736 Date: Thu Jan 10 02:22:05 2008 -0600
40738 Fix compiler warning
40740 main.c: In function 'readline_into_buffer':
40741 main.c:927: warning: unused variable 'p_buf'
40743 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
40745 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
40746 Author: Anatolij Gustschin <agust@denx.de>
40747 Date: Fri Jan 11 14:30:01 2008 +0100
40749 Add Fujitsu CoralP/Lime video driver
40751 Signed-off-by: Anatolij Gustschin <agust@denx.de>
40752 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
40754 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
40755 Author: Anatolij Gustschin <agust@denx.de>
40756 Date: Fri Jan 11 02:39:47 2008 +0100
40758 Fix video console newline and carriage return handling
40760 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
40761 are not displayed correctly. This is an attempt to fix
40762 this issue. Also add carriage return handling.
40764 Signed-off-by: Anatolij Gustschin <agust@denx.de>
40765 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
40767 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
40768 Author: Stefan Roese <sr@denx.de>
40769 Date: Fri Jan 11 15:53:58 2008 +0100
40771 ppc4xx: Fix sdram init on Sequoia boards
40773 Clear possible errors in MCSR resulting from data-eye-search.
40774 If not done, then we could get an interrupt later on when
40775 exceptions are enabled.
40777 Signed-off-by: Stefan Roese <sr@denx.de>
40779 commit d610a60730b7464f6f659db49d264d89a7c71061
40780 Author: Anatolij Gustschin <agust@denx.de>
40781 Date: Fri Jan 11 15:31:09 2008 +0100
40783 ppc4xx: Rework Lime support for lwmon5
40785 Rework Lime support for lwmon5 using new video driver
40787 Signed-off-by: Anatolij Gustschin <agust@denx.de>
40789 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
40790 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40791 Date: Fri Jan 11 14:55:16 2008 +0100
40793 ppc4xx: Update PMC440 config file
40795 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40797 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
40798 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40799 Date: Fri Jan 11 14:55:08 2008 +0100
40801 ppx4xx: Fix sdram init on PMC440 boards
40803 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40805 commit 061aad4d320dddce26247699dcf2875ee2ea1366
40806 Author: Dave Liu <r63238@freescale.com>
40807 Date: Thu Jan 10 23:09:33 2008 +0800
40809 mpc83xx: Fix the bug of 266MHz data rate DDR
40811 The DDR doesn't work on the 266MHz data rate,
40812 the patch fix the bug.
40814 Signed-off-by: Dave Liu <daveliu@freescale.com>
40815 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40817 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
40818 Author: Dave Liu <r63238@freescale.com>
40819 Date: Thu Jan 10 23:08:26 2008 +0800
40821 mpc83xx: Make the code more readable
40823 Format the code, make it more readable
40825 Signed-off-by: Dave Liu <daveliu@freescale.com>
40826 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40828 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
40829 Author: Dave Liu <r63238@freescale.com>
40830 Date: Thu Jan 10 23:07:23 2008 +0800
40832 mpc83xx: Reduce the latency of DDR
40834 Reduce the AL from 2 to 1 clock to improve the performance.
40836 Signed-off-by: Dave Liu <daveliu@freescale.com>
40837 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40839 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
40840 Author: Dave Liu <r63238@freescale.com>
40841 Date: Thu Jan 10 23:06:05 2008 +0800
40843 mpc83xx: Fix the wrong definition of MPC8315E
40845 According to the latest user manual of MPC8315E,
40846 1) The SVCOD of HRCWL is different than 837x
40847 2) The SCCR has changes
40849 Signed-off-by: Dave Liu <daveliu@freescale.com>
40850 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40852 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
40853 Author: Dave Liu <r63238@freescale.com>
40854 Date: Thu Jan 10 23:05:00 2008 +0800
40856 mpc83xx: Fix the typo in mpc83xx.h
40858 The SPCR about TSEC priority is wrong.
40860 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
40861 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
40862 Signed-off-by: Dave Liu <daveliu@freescale.com>
40863 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40865 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
40866 Author: Dave Liu <r63238@freescale.com>
40867 Date: Thu Jan 10 23:04:13 2008 +0800
40869 mpc83xx: Fix the typo in global data struct
40871 Fix the typo in global_data.h
40873 Signed-off-by: Dave Liu <daveliu@freescale.com>
40874 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40876 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
40877 Author: Dave Liu <r63238@freescale.com>
40878 Date: Thu Jan 10 23:03:03 2008 +0800
40880 mpc83xx: Remove cache config from config.h
40882 clean up the cache config from configs.h of board
40884 Signed-off-by: Dave Liu <daveliu@freescale.com>
40885 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40887 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
40888 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
40889 Date: Wed Jan 9 20:57:47 2008 +0300
40891 mpc83xx: add support for the MPC8360E-RDK
40893 This is MPC8360E based board with:
40894 - 256MB fixed SDRAM;
40895 - 8MB Intel Strata NOR flash;
40896 - StMICRO 64MiB NAND flash;
40897 - two 10/100/1000 ethernet ports connected via Broadcom
40899 - two 10/100 ethernet ports connected via National
40901 - one PCI and one miniPCI slots;
40902 - four serial ports (two NS16550-compatible, two UCCs);
40903 - four USB ports working through MPC8360E "FHCI" USB controller;
40904 - Fujitsu MB86277 graphics controller;
40905 - Analog to Digital Converter/Touchscreen controller, AD7843
40908 Features not supported in this patch are:
40909 - StMICRO 64MiB NAND flash (patch sent);
40910 - MINT framebuffer initialization (patch is pending);
40911 - Fetching production information from the EEPROM via I2C;
40913 - Two slow UCCs used as RS-485 UARTs.
40915 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
40916 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40918 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
40919 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
40920 Date: Wed Jan 9 20:57:40 2008 +0300
40922 mpc83xx: add "fsl, qe" compatible fixups
40924 New device trees will use "fsl,qe" compatible properties.
40926 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
40927 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40929 commit 977b57583a7c34010e566a09a679ec3c1836f996
40930 Author: Kim Phillips <kim.phillips@freescale.com>
40931 Date: Wed Jan 9 15:24:06 2008 -0600
40933 mpc83xx: add missing CONFIG_HAS_ETH0 defines
40935 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
40936 is defined; add the define to the missing board configs.
40938 Thanks to Emilian Medve for finding this.
40940 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
40942 commit b830b7f1635984ba607219fcbd78597c28eeb529
40943 Author: Becky Bruce <bgill@freescale.com>
40944 Date: Thu Jan 10 14:00:28 2008 -0600
40946 86xx: Support 2GB DIMMs
40948 Configure the number of bits used to address the banks inside the SDRAM
40949 device. The default register value of 0 means 2 bits to address 4 banks.
40950 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
40952 Signed-off-by: Becky Bruce <bgill@freescale.com>
40954 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
40955 Author: Niklaus Giger <niklausgiger@gmx.ch>
40956 Date: Thu Jan 10 18:50:33 2008 +0100
40958 ppc4xx: Make Sequoia boot vxWorks
40961 TLB 0 a entry for the Machine Check interrupt
40962 TLB 1 a entry for the RAM
40963 TLB 2 a entry for the EBC
40964 TLB 3 a entry for the boot flash
40966 After changing the baudrate to 9600 I had no problems to boot the
40967 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
40970 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
40972 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
40973 Author: Larry Johnson <lrj@arlinx.com>
40974 Date: Wed Jan 9 23:10:27 2008 -0500
40976 ppc4xx: Fix dflush() to restore DVLIM register
40978 Signed-off-by: Larry Johnson <lrj@acm.org>
40980 commit 252f60b068d1f94190b5bcfda169db582387e15e
40981 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40982 Date: Thu Jan 10 03:52:44 2008 -0500
40984 Nios2: remove common/cmd_bdinfo.c unused variable.
40986 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
40987 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
40989 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
40990 Author: Ben Warren <biggerbadderben@gmail.com>
40991 Date: Wed Jan 9 18:15:53 2008 -0500
40993 Fix Ethernet init() return codes
40995 Change return values of init() functions in all Ethernet drivers to conform
41001 All drivers going forward should return 0 on success. Current drivers that
41002 return 1 on success were left as-is to minimize changes.
41004 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
41005 Acked-by: Stefan Roese <sr@denx.de>
41006 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41007 Acked-by: Kim Phillips <kim.phillips@freescale.com>
41008 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
41009 Acked-By: Timur Tabi <timur@freescale.com>
41011 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
41012 Author: Wolfgang Denk <wd@denx.de>
41013 Date: Thu Jan 10 00:55:14 2008 +0100
41015 Coding Style cleanup; update CHANGELOG
41017 Signed-off-by: Wolfgang Denk <wd@denx.de>
41019 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
41020 Author: Kim Phillips <kim.phillips@freescale.com>
41021 Date: Wed Jan 9 16:56:54 2008 -0600
41023 Add QE brg freq and correct qe bus freq fdt update code
41025 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41026 Signed-off-by: Andy Fleming <afleming@freescale.com>
41028 commit 890dfef06c2d169a3356359596890754dfb8ee1c
41029 Author: Andy Fleming <afleming@freescale.com>
41030 Date: Wed Jan 9 16:34:51 2008 -0600
41032 Remove cache config from ATUM8548 and sbc8548 configs
41034 These boards weren't updated by Kumar's config patch because they
41035 weren't in the tree, yet.
41037 Signed-off-by: Andy Fleming <afleming@freescale.com>
41039 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
41040 Author: Timur Tabi <timur@freescale.com>
41041 Date: Mon Jan 7 13:31:19 2008 -0600
41043 85xx: add ability to upload QE firmware
41045 Define the layout of a binary blob that contains a QE firmware and instructions
41046 on how to upload it. Add function qe_upload_firmware() to parse the blob and
41047 perform the actual upload. Add command-line command "qe fw" to take a firmware
41048 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
41049 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
41050 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
41052 Signed-off-by: Timur Tabi <timur@freescale.com>
41054 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
41055 Author: Kumar Gala <galak@kernel.crashing.org>
41056 Date: Tue Jan 8 01:22:21 2008 -0600
41058 85xx: Remove cache config from configs.h
41060 Either use the standard defines in asm/cache.h or grab the information
41061 at runtime from the L1CFG SPR.
41063 Also, minor cleanup in cache.h to make the code a bit more readable.
41065 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
41067 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
41068 Author: robert lazarski <robertlazarski@gmail.com>
41069 Date: Fri Dec 21 10:39:27 2007 -0500
41071 mpc85xx: Add support for ATUM8548 (updated)
41073 Add support for Instituto Atlantico's ATUM8548 board
41075 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
41076 Signed-off-by: Andy Fleming <afleming@freescale.com>
41078 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
41079 Author: robert lazarski <robertlazarski@gmail.com>
41080 Date: Fri Dec 21 10:36:37 2007 -0500
41082 mpc85xx: Add support for ATUM8548 (updated)
41084 Add support for Instituto Atlantico's ATUM8548 board
41086 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
41088 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
41089 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
41090 Date: Thu Dec 13 06:45:14 2007 -0600
41092 mpc85xx: Add support for SBC8548 (updated)
41094 Add support for Wind River's SBC8548 reference board.
41096 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
41098 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
41099 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
41100 Date: Thu Dec 13 06:45:08 2007 -0600
41102 mpc85xx: Add support for SBC8548 (updated)
41104 Add support for Wind River's SBC8548 reference board.
41106 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
41107 Signed-off by: Andy Fleming <afleming@freescale.com>
41109 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
41110 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
41111 Date: Mon Oct 22 19:58:19 2007 +0400
41113 MPC8568E-MDS: set up QE pario for UART1
41115 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
41116 be set up appropriately.
41118 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
41120 commit ad162249cb371e9e38971676f09be791e5f3cf4a
41121 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
41122 Date: Mon Oct 22 18:12:46 2007 +0400
41124 MPC8568E-MDS: reset UCCs to use them reliably
41126 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
41129 p.s Similar code exists in the Linux kernel board file (for capability
41130 reasons with older U-Boots), but should be removed some day.
41132 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
41134 commit 2146cf56821c3364786ca94a7306008c5824b238
41135 Author: Kumar Gala <galak@kernel.crashing.org>
41136 Date: Wed Dec 19 01:18:15 2007 -0600
41138 Reworked FSL Book-E TLB macros to be more readable
41140 The old macros made it difficult to know what WIMGE and perm bits
41141 were set for a TLB entry. Actually use the bit masks for these items
41142 since they are only a single bit.
41144 Also moved the macros into mmu.h out of e500.h since they aren't specific
41147 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
41149 commit 1d47273d46925929f8f2c1913cd96d7257aade88
41150 Author: Kumar Gala <galak@kernel.crashing.org>
41151 Date: Tue Dec 18 23:21:51 2007 -0600
41153 Use FSL Book-E MMU macros from Linux Kernel
41155 Grab the FSL Book-E MAS register macros from Linux. Also added
41156 defines for page sizes up to 4TB and removed SHAREN since it doesnt
41159 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
41161 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
41162 Author: Andy Fleming <afleming@freescale.com>
41163 Date: Wed Jan 9 13:51:32 2008 -0600
41165 Fix my own merge stupidity
41167 Way back in August I merged Heiko's patch:
41168 566a494f592: [PCS440EP] upgrade the PCS440EP board
41170 with Jon's CONFIG_COMMANDS patches.
41172 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
41174 However, in the process, I left out some of Heiko's good changes.
41176 Now Heiko's and Jon's patches are properly merged in fat_register_device()
41178 Signed-off-by: Andy Fleming <afleming@freescale.com>
41180 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
41181 Author: James Yang <James.Yang@freescale.com>
41182 Date: Wed Jan 9 11:17:49 2008 -0600
41184 Expose parse_line() globally.
41186 Add new function readline_into_buffer() that allows the
41187 output of readline to be put into a pointer to char buffer.
41189 This refactoring allows other functions besides the
41190 main command loop to also use the same input mechanism.
41192 Signed-off-by: James Yang <James.Yang@freescale.com>
41193 Acked-by: Jon Loeliger <jdl@freescale.com>
41195 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
41196 Author: Guennadi Liakhovetski <lg@denx.de>
41197 Date: Wed Jan 9 01:15:25 2008 +0100
41199 trivial: fix consequences of a bad merge
41201 Fix what looks like a merge artifact.
41203 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
41205 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
41206 Author: Zhang Wei <wei.zhang@freescale.com>
41207 Date: Thu Jan 3 10:51:15 2008 +0800
41209 Add Ctrl combo key support to usb keyboard driver.
41211 Ctrl combo key support is added, which is very useful to input Ctrl-C
41212 for interrupt current job.
41213 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
41214 key input when tstc() is called.
41216 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
41218 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
41219 Author: Marcel Ziswiler <marcel@ziswiler.com>
41220 Date: Sun Dec 30 03:30:56 2007 +0100
41222 fix various comments
41224 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
41226 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
41227 Author: Marcel Ziswiler <marcel@ziswiler.com>
41228 Date: Sun Dec 30 03:30:46 2007 +0100
41230 fix comments with new drivers organization
41232 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
41234 commit a9b410dc7d2a4721c408b13abfc037988150f145
41235 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41236 Date: Fri Dec 28 12:50:59 2007 +0900
41238 Remove the obsolete terse version of do_mii()
41240 We now have more useful version of do_mii() and everybody use it.
41241 Gerald Van Baren says:
41243 > When I originally wrote the mii command 6(!) years ago, I wrote a
41244 > verbose version that printed human readable decomposition of the flags,
41245 > etc., and a terse one that didn't print as much stuff and thus had a
41246 > smaller memory footprint.
41248 > It sounds like the terse version has withered and died, apparently
41249 > people are only using the verbose version (which is very understandable,
41252 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41253 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
41255 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
41256 Author: Mike Frysinger <vapier@gentoo.org>
41257 Date: Thu Dec 27 13:42:56 2007 -0500
41259 Do not reference sha1.c when building mkimage.
41261 remove sha1.o from mkimage linking since it isn't actually used.
41263 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
41265 commit b9173af73e524d37c812f210173cf83385c5171a
41266 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41267 Date: Thu Dec 27 15:39:54 2007 +0900
41269 common/cmd_mii.c: Add sanity argc check
41271 If type mii command without arguments, we suffer from uninitialized argv[]
41272 entries; for example we MIPS get stuck by TLB error.
41274 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
41276 commit 500856eb1707ed17d9204baa61dd59948d3b2899
41277 Author: Rafal Jaworowski <raj@semihalf.com>
41278 Date: Wed Jan 9 19:39:36 2008 +0100
41280 API for external applications.
41282 This is an API for external (standalone) applications running on top of
41283 U-Boot, and is meant to be more extensible and robust than the existing
41284 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
41287 Included is the demo application using this new framework (api_examples).
41289 Please note this is still an experimental feature, and is turned off by
41292 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
41294 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
41295 Author: Jon Loeliger <jdl@freescale.com>
41296 Date: Wed Jan 9 12:14:55 2008 -0600
41298 86xx: Remove cache config from configs.h
41300 Just use the standard defines in asm/cache.h.
41302 Signed-off-by: Jon Loeliger <jdl@freescale.com>
41304 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
41305 Author: Rafal Jaworowski <raj@semihalf.com>
41306 Date: Wed Jan 9 18:05:27 2008 +0100
41308 Globalize envmatch()
41310 The newly introduced API (routines related to env vars) will need to call
41313 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
41315 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
41316 Author: Jon Loeliger <jdl@freescale.com>
41317 Date: Fri Jan 4 12:07:27 2008 -0600
41319 Convert MPC8610HPCD to use libfdt.
41321 Assumes the presence of the aliases node in the DTS to
41322 locate the pci and serial nodes for fixups.
41324 Use consistent fdtaddr and fdtfile in environment variables.
41326 Signed-off-by: Jon Loeliger <jdl@freescale.com>
41328 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
41329 Author: Jon Loeliger <jdl@freescale.com>
41330 Date: Fri Jan 4 11:58:23 2008 -0600
41332 8610: Fix lingering compile warnings.
41336 Signed-off-by: Jon Loeliger <jdl@freescale.com>
41338 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
41339 Author: Wolfgang Denk <wd@denx.de>
41340 Date: Wed Jan 9 15:14:46 2008 +0100
41342 Coding Style cleanup, update CHANGELOG
41344 Signed-off-by: Wolfgang Denk <wd@denx.de>
41346 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
41347 Author: Mike Frysinger <vapier@gentoo.org>
41348 Date: Tue Dec 18 04:29:55 2007 -0500
41350 fix easylogo on big endian dev systems
41352 didnt realize how out of shape easylogo actually was until i tried using it.
41353 this patch does byte swapping as need be on the input tga header since the tga
41354 is in little endian but the host could just as well be big endian. i didnt
41355 bother using bswap macros or such stuff from system headers as nothing in
41356 POSIX dictates byte swapping functionality.
41358 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
41360 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
41361 Author: Mike Frysinger <vapier@gentoo.org>
41362 Date: Tue Dec 18 03:23:25 2007 -0500
41366 - make the Makefile not suck
41367 - include proper headers for prototypes
41368 - fix obvious broken handling of strchr() when handling '.' in filenames
41370 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
41372 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
41373 Author: raptorbrino@aim.com <raptorbrino@aim.com>
41374 Date: Thu Dec 13 21:23:28 2007 -0500
41376 Fix build problems under Cygwin
41378 This patch allows u-boot to build without error in a cygwin
41379 environment. Cygwin does not define __u64 in it's
41380 include/asm/types.h file. The -idirafter flag in the u-boot
41381 build causes the inclusion of the cygwin types.h file as opposed
41382 to u-bot/include/asm/types.h file which does define __u64.
41383 Subsequently, sha1.c compile fails due to unknown symbol.
41385 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
41387 commit 43ef1c381f9195504a2488f5cb909227eb97d475
41388 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
41389 Date: Fri Nov 30 17:29:59 2007 +0100
41391 cmd_bmp: Add support for displaying gzip compressed bmps
41393 The existing code can show information about a gzip compressed BMP
41394 image, but can't actually display it.
41396 Therefore, move the decompression code out of bmp_info() and use it in
41397 bmp_display() as well in order to display a compressed BMP image.
41399 Also, clean things up a bit and fix a memory leak while we're at it.
41401 [hskinnemoen@atmel.com: a bit of refactoring]
41402 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
41404 commit d197ffd8172c6fdef38733424640a9a47295d6e9
41405 Author: Guennadi Liakhovetski <lg@denx.de>
41406 Date: Thu Nov 29 21:15:56 2007 +0100
41408 Fix and optimize MII operations on FEC (MPC8xx) controllers
41410 This patch fixes several issues at least on a MPC885 based system with two
41411 FEC interfaces used in MII mode.
41413 1. PHY discovery should first read PHY_PHYIDR2 register and only then
41414 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
41415 otherwise the values read are wrong. Also notice, that PHY discovery
41416 cannot work on MPC88x / MPC87x in setups with both FECs active at all
41417 in its present form, because for both interfaces the registers from FEC
41418 1 are used to communicate over MII.
41420 2. Remove code duplication for resetting the FEC by isolating it into a
41423 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
41425 4. Optimize mii_init() to only reset the FEC 1 controller once.
41427 5. Fix a typo in mii_init() using index i instead of j thus potentially
41428 leading to unpredictable results.
41430 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
41432 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
41433 Author: Guennadi Liakhovetski <lg@denx.de>
41434 Date: Tue Nov 20 13:14:20 2007 +0100
41436 Fix endianness conversions in rtl8169 driver
41438 It is unclear on what platforms this driver has been tested, since
41439 noone up to now defines CONFIG_RTL8169 in the board configuration
41440 header. Now it has been fixed for a big-endian mpc8241 based
41441 linkstation platform. This patch presents the necessary endianness
41444 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
41446 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
41447 Author: Zhang Wei <wei.zhang@freescale.com>
41448 Date: Thu Jan 3 10:51:15 2008 +0800
41450 Add Ctrl combo key support to usb keyboard driver.
41452 Ctrl combo key support is added, which is very useful to input Ctrl-C
41453 for interrupt current job.
41454 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
41455 key input when tstc() is called.
41457 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
41458 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
41460 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
41461 Author: Wolfgang Denk <wd@denx.de>
41462 Date: Wed Jan 9 13:43:38 2008 +0100
41464 Coding Style clenaup; update CHANGELOG
41466 Signed-off-by: Wolfgang Denk <wd@denx.de>
41468 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
41469 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41470 Date: Thu Dec 27 17:13:11 2007 +0100
41472 Remove bit swapping in Xilinx Spartan bitfile loading
41474 This patch removes the unnecessary bit swapping when
41475 booting .bit files with the 'fpga loadb' command.
41477 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41479 commit 437fc7327f0611f82937858f2d80e4cd61b40984
41480 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41481 Date: Thu Dec 27 17:13:05 2007 +0100
41483 Fix MSB check in Xilinx Spartan slave serial mode
41485 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41487 commit 3bff4ffa33729a42645e328a21e8d16488872958
41488 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41489 Date: Thu Dec 27 17:12:56 2007 +0100
41491 Add new Xilinx Spartan FPGA types
41493 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41495 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
41496 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41497 Date: Thu Dec 27 17:12:43 2007 +0100
41499 Add pre and post configuration callbacks for Spartan FPGAs
41501 This patch adds a post configuration callback for Spartan2/3 FPGAs.
41502 pre and post configuration callback are now optional and
41503 not called when the function pointer is set to NULL.
41505 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41507 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
41508 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41509 Date: Thu Dec 27 17:12:34 2007 +0100
41511 Improve configuration of FPGA subsystem
41513 This patch removes the FPGA subsystem configuration through
41514 the CONFIG_FPGA bitmask configuration option.
41516 See README for the new options:
41519 CONFIG_FPGA_<vendor>,
41520 CONFIG_FPGA_<family>
41522 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41524 commit 95c6bc7d4a3588b452baca610f8c795a83630477
41525 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41526 Date: Thu Dec 27 16:55:17 2007 +0100
41528 Add Epson RX8025 RTC support
41530 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41532 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
41533 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41534 Date: Thu Dec 27 16:57:23 2007 +0100
41536 serial: Make default_serial_console() a weak function
41538 With this patch it is possible to reimplement default_serial_console()
41539 in board specific code. This will be done in the upcomming PMC440
41540 U-Boot port. This also allows the lwmon board maintainer to
41541 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
41543 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41545 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
41546 Author: Harald Welte <laforge@openmoko.org>
41547 Date: Wed Dec 19 14:14:47 2007 +0100
41549 add 'terminal program' functionality
41551 This patch adds a 'cu' like serial terminal command to u-boot
41552 using which you can access other serial ports from the system console.
41554 OpenMoko uses this in their Neo1973 phones to get access to the GSM
41555 Modem and GPS chip from the bootloader.
41557 Signed-off-by: Harald Welte <laforge@openmoko.org>
41559 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
41560 Author: Harald Welte <laforge@openmoko.org>
41561 Date: Wed Dec 19 14:12:53 2007 +0100
41563 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
41564 that used to exist with the legacy NAND code
41566 Signed-off-by: Harald Welte <laforge@openmoko.org>
41568 commit f540c42d9564854b19ce9bbb70affe172529fe70
41569 Author: Harald Welte <laforge@openmoko.org>
41570 Date: Wed Dec 19 14:09:58 2007 +0100
41572 Fix building with CRAMFS but not JFFS2 support
41574 Signed-off-by: Harald Welte <laforge@openmoko.org>
41576 commit 23d0baf967fecdaf1804f045f6339337c5607eec
41577 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41578 Date: Sat Dec 22 15:52:58 2007 +0100
41580 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
41582 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
41583 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41585 commit 23776ff292966a85d811126933830bed48211826
41586 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41587 Date: Tue Dec 11 10:53:12 2007 +0100
41589 ARM: support board-specific ethernet PHY init
41591 Add until the new phylib will be arrived
41593 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41595 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
41596 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41597 Date: Sat Dec 8 16:34:08 2007 +0100
41599 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
41601 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41603 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
41604 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41605 Date: Sun Dec 9 11:01:10 2007 +0100
41607 Add missing file in gitignore and comments
41609 based on Linux source tree's .gitignore files
41611 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
41613 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
41614 Author: Wolfgang Denk <wd@denx.de>
41615 Date: Wed Jan 9 11:36:21 2008 +0100
41617 Coding Style cleanup, update CHANGELOG
41619 Signed-off-by: Wolfgang Denk <wd@denx.de>
41621 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
41622 Author: Stefan Roese <sr@denx.de>
41623 Date: Wed Jan 9 10:38:58 2008 +0100
41625 POST: Execute SPR test after relocation
41627 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
41628 self modifying code and this doesn't work with stack in d-cache, since
41629 I can't move the code from d-cache to i-cache. We move the SPR test to
41630 be executed a little later, after relocation. Then stack is located in
41631 SDRAM and this self-modifying code is no problem anymore.
41633 Signed-off-by: Stefan Roese <sr@denx.de>
41635 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
41636 Author: Stefan Roese <sr@denx.de>
41637 Date: Wed Jan 9 10:28:20 2008 +0100
41639 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
41641 This patch configures the LWMON5 port to use d-cache as init-ram and
41642 the unused GPT0_COMP6 as POST WORD storage.
41644 Signed-off-by: Stefan Roese <sr@denx.de>
41646 commit 1754f50b710194f886b6f2831803d8960171a14d
41647 Author: Stefan Roese <sr@denx.de>
41648 Date: Wed Jan 9 10:25:46 2008 +0100
41650 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
41652 The privious 4xx POST implementation only supported storing the POST
41653 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
41654 we need to store the POST WORD in some other non volatile location.
41655 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
41658 Signed-off-by: Stefan Roese <sr@denx.de>
41660 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
41661 Author: Stefan Roese <sr@denx.de>
41662 Date: Wed Jan 9 10:23:16 2008 +0100
41664 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
41666 This patch adds support for locking the init-ram/stack in d-cache,
41667 so that other regions may use d-cache as well
41669 Note, that this current implementation locks exactly 4k of d-cache,
41670 so please make sure that you don't define a bigger init-ram area. Take
41671 a look at the lwmon5 440EPx implementation as a reference.
41673 Signed-off-by: Stefan Roese <sr@denx.de>
41675 commit 0ddb89601a8d29e808db450366752ffdc6267c53
41676 Author: Wolfgang Denk <wd@denx.de>
41677 Date: Wed Jan 9 10:16:33 2008 +0100
41679 Fix memset bug in ext2fs_read_file()
41681 ext2fs_read_file() had the function arguments swapped.
41683 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
41685 Signed-off-by: Wolfgang Denk <wd@denx.de>
41687 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
41688 Author: Markus Klotzbücher <mk@denx.de>
41689 Date: Tue Jan 5 08:17:15 1988 +0100
41691 Fix problems with usb storage devices on MPC5200 /TQM5200
41693 The MPC5200 OHCI controller operates in big endian, so
41694 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
41696 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
41698 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
41699 Author: Wolfgang Denk <wd@denx.de>
41700 Date: Tue Jan 8 22:58:27 2008 +0100
41702 Fix compile problem with new env code.
41704 Signed-off-by: Wolfgang Denk <wd@denx.de>
41706 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
41707 Author: Markus Klotzbücher <mk@denx.de>
41708 Date: Tue Nov 27 10:23:20 2007 +0100
41710 tools: fix fw_printenv tool to compile again
41712 This patch updates the fw_printenv/fw_setenv userspace tool to include
41713 the correct MTD header in order to compile against current kernel
41714 headers. Backward compatibility is preserved by introducing an option
41715 MTD_VERSION which can be set to "old" for compilation using the old MTD
41716 headers. Along with this a number of warnings are fixed.
41718 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
41720 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
41721 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41722 Date: Tue Jan 8 15:40:09 2008 +0100
41724 ppc4xx: assign PCI interrupts on seuqoia boards
41726 Some operating systems rely on assigned PCI interrupts.
41728 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41730 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
41731 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41732 Date: Tue Jan 8 15:50:49 2008 +0100
41734 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
41736 This patch allows the use of 4xx interrupt vector number defines
41737 in board specific code outside cpu/ppc4xx.
41739 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41741 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
41742 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41743 Date: Tue Jan 8 15:39:01 2008 +0100
41745 ppc4xx: Fix UIC2 vector number base
41747 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41749 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
41750 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41751 Date: Tue Jan 8 12:49:58 2008 +0100
41753 ppc4xx: Update PLB/PCI divider for PMC440 board
41755 This patch updates the PLB/PCI divider when running at
41756 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
41758 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41760 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
41761 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41762 Date: Tue Jan 8 11:13:09 2008 +0100
41764 ppc4xx: Disable error message when no NAND chip is installed on PMC440
41766 Add CFG_NAND_QUIET_TEST option to disable error message when
41767 no NAND chip is installed on PMC440 boards.
41769 Disable a couple of config defines that are only used for NAND_U_BOOT.
41771 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41773 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
41774 Author: Wolfgang Denk <wd@denx.de>
41775 Date: Tue Jan 8 22:58:27 2008 +0100
41777 Fix compile problem with new env code.
41779 Signed-off-by: Wolfgang Denk <wd@denx.de>
41781 commit 6de66b35426312a21174a9bf0576a094e2904bea
41782 Author: Markus Klotzbücher <mk@denx.de>
41783 Date: Tue Nov 27 10:23:20 2007 +0100
41785 tools: fix fw_printenv tool to compile again
41787 This patch updates the fw_printenv/fw_setenv userspace tool to include
41788 the correct MTD header in order to compile against current kernel
41789 headers. Backward compatibility is preserved by introducing an option
41790 MTD_VERSION which can be set to "old" for compilation using the old MTD
41791 headers. Along with this a number of warnings are fixed.
41793 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
41795 commit ad3006fe7e84667021753b74247b0bafd97ba35f
41796 Author: Gerald Van Baren <vanbaren@cideas.com>
41797 Date: Mon Jan 7 23:47:32 2008 -0500
41799 LIBFDT: use memmove() instead of memcpy()
41801 This is partial patch from the DTC/libfdt
41802 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
41803 Author: David Gibson <david@gibson.dropbear.id.au>
41804 Date: Wed Nov 21 11:56:14 2007 +1100
41806 The patch also fixes one genuine bug caught by valgrind -
41807 _packblocks() in fdt_rw.c was using memcpy() where it should have been
41810 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
41812 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
41813 Author: David Gibson <david@gibson.dropbear.id.au>
41814 Date: Mon Dec 17 14:42:07 2007 +1100
41816 libfdt: Add more documentation (patch the seventh)
41818 This patch adds more documenting comments to libfdt.h. Specifically,
41819 these document the read/write functions (not including fdt_open_into()
41820 and fdt_pack(), for now).
41822 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
41824 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
41825 Author: David Gibson <david@gibson.dropbear.id.au>
41826 Date: Mon Dec 17 14:41:52 2007 +1100
41828 libfdt: Add more documentation (patch the sixth)
41830 This patch adds some more documenting comments to libfdt.h.
41831 Specifically this documents all the write-in-place functions.
41833 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
41835 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
41836 Author: Gerald Van Baren <vanbaren@cideas.com>
41837 Date: Sat Dec 29 22:45:27 2007 -0500
41839 Fine grained per property /chosen updating.
41841 Implement a suggestion by Scott Wood to make the /chosen handling fine
41842 grained. Don't overwrite pre-existing properties on a per-property basis,
41843 so if /chosen exists but a necessary /chosen/property doesn't, it gets
41844 created. If a /chosen property exists, it is NOT overwritten unless the
41845 "force" flag is true.
41847 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
41849 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
41850 Author: Gerald Van Baren <vanbaren@cideas.com>
41851 Date: Sat Jan 5 15:33:29 2008 -0500
41853 Improve the FDT help message.
41855 Add a note that "fdt copy" makes the new address active.
41856 Remove most of the extra hints at the end of the fdt help.
41858 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
41860 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
41861 Author: Gerald Van Baren <vanbaren@cideas.com>
41862 Date: Sat Jan 5 14:52:04 2008 -0500
41864 Support setting FDT properties with optional values.
41866 Fix a bug found and documented by Bartlomiej Sieka where the optional
41867 value on "fdt set <path> <prop> [<val>]" wasn't optional.
41869 => fdt mknode / testnode
41870 => fdt print /testnode
41873 => fdt set /testnode testprop
41874 => fdt print /testnode
41879 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
41881 commit 22fb2246df91bfc840d87f0c5910818bad55577a
41882 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41883 Date: Fri Dec 28 11:56:30 2007 +0100
41885 Add fdt_find_and_setprop() to fdt_support.h
41887 fdt_find_and_setprop() is used by several 4xx boards and it's
41888 missing in the appropriate header. This patch eliminates a
41889 warning when building U-Boot for such boards.
41891 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
41892 Acked-by: Stefan Roese <sr@denx.de>
41894 commit 802b769bac17b0560d3535a42c502469ee190cd1
41895 Author: Stefan Roese <sr@denx.de>
41896 Date: Tue Jan 8 18:39:30 2008 +0100
41898 ppc4xx: Return 0 on success in 4xx ethernet driver
41900 Signed-off-by: Stefan Roese <sr@denx.de>
41902 commit 6775c68683a53c7abc778774641aac6f833a2cbf
41903 Author: Kim Phillips <kim.phillips@freescale.com>
41904 Date: Tue Jan 8 09:59:49 2008 -0600
41906 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
41908 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41910 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
41911 Author: Kim Phillips <kim.phillips@freescale.com>
41912 Date: Thu Dec 20 16:28:34 2007 -0600
41914 mpc83xx: rm remaining FLAT_TREE code
41916 ..in board pci.c files
41918 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41920 commit b3458d2cd55d01732e30a76d898afd99e871cd67
41921 Author: Kim Phillips <kim.phillips@freescale.com>
41922 Date: Thu Dec 20 15:57:28 2007 -0600
41924 mpc83xx: remove FLAT_TREE code
41926 need to rm it from pci code, too!
41928 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41930 commit 5b8bc606c61456566af6912f818a153b6b06f242
41931 Author: Kim Phillips <kim.phillips@freescale.com>
41932 Date: Thu Dec 20 14:09:22 2007 -0600
41934 mpc83xx: convert to using do_fixup_*()
41936 convert to using simpler mpc85xx style fdt update code; streamline by
41937 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
41938 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
41939 converted over to using libfdt).
41941 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41943 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
41944 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
41945 Date: Thu Dec 20 12:58:51 2007 -0500
41947 sbc8349: enable libfdt by default on WRS SBC8349 board.
41949 Make libfdt the default for the WRS SBC8349 board.
41950 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
41951 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
41953 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
41955 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
41956 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
41957 Date: Thu Dec 20 12:58:16 2007 -0500
41959 sbc8349: migrate board to libfdt
41961 This adds libfdt support code for the Wind River sbc8349 board.
41963 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
41964 the other Freescale 83xx boards.
41966 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
41968 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
41969 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
41970 Date: Thu Dec 20 12:56:19 2007 -0500
41972 sbc8349: Remove board specific ECC code
41974 ECC code is now shared for all 83xx boards, so remove board specific one.
41975 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
41977 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
41979 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
41980 Author: Kim Phillips <kim.phillips@freescale.com>
41981 Date: Thu Dec 20 01:30:48 2007 -0600
41983 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
41985 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
41987 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
41989 commit ccf21c311e68d48399eff1e72936052885f6e3f7
41990 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
41991 Date: Thu Dec 6 16:43:40 2007 +0100
41993 Add support CONFIG_UEC_ETH3 in MPC83xx
41995 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
41997 commit e6af9932d31171e35db880e7b2f29f903b1b7660
41998 Author: Kumar Gala <galak@kernel.crashing.org>
41999 Date: Mon Nov 26 11:00:54 2007 -0600
42001 Remove CONFIG options related to OF that we dont use
42003 The MPC8360E MDS config defined:
42005 CONFIG_OF_HAS_UBOOT_ENV
42007 Which we don't use or ever needed. This seems like copy-paste feature creep.
42009 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
42011 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
42012 Author: Kim Phillips <kim.phillips@freescale.com>
42013 Date: Mon Dec 10 14:16:22 2007 -0600
42015 mpc83xx: supress compiler warning
42017 mpc8360emds.c: In function ‘ft_board_setup’:
42018 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
42019 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
42021 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42023 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
42024 Author: Kim Phillips <kim.phillips@freescale.com>
42025 Date: Tue Nov 27 14:17:29 2007 -0600
42027 mpc83xx: fix remaining fdt_find_node_by_path references
42029 rename to fdt_path_offset
42031 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42033 commit 921d4b19ad1be704df58725485d9292dc0414adf
42034 Author: Kim Phillips <kim.phillips@freescale.com>
42035 Date: Mon Nov 19 12:30:09 2007 -0600
42037 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
42039 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
42040 This change guarantees that the environment will be located on the
42041 first flash sector after the U-Boot image.
42043 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42045 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
42046 Author: Kim Phillips <kim.phillips@freescale.com>
42047 Date: Fri Nov 9 14:28:08 2007 -0600
42049 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
42051 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
42052 properties in the device tree so the PHY gets configured for internal delay on
42053 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
42055 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42057 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
42058 Author: Dave Liu <r63238@freescale.com>
42059 Date: Tue Sep 18 12:41:15 2007 +0800
42061 mpc83xx: update the CREDITS and MAINTAINERS
42063 update the CREDITS and MAINTAINERS.
42065 Signed-off-by: Dave Liu <daveliu@freescale.com>
42067 commit b21add4b42af7b767448251b599b91066a160e0d
42068 Author: Dave Liu <r63238@freescale.com>
42069 Date: Tue Sep 18 12:40:21 2007 +0800
42071 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
42073 Add the MAINTAINER and MAKEALL entries for mpc837xemds
42075 Signed-off-by: Dave Liu <daveliu@freescale.com>
42077 commit f8900ce9094c462355eb792eea264ff16ac8fd16
42078 Author: Dave Liu <r63238@freescale.com>
42079 Date: Tue Sep 18 12:38:53 2007 +0800
42081 mpc83xx: Add the MPC837xEMDS board readme
42083 Add the README.mpc837xemds to /doc
42085 Signed-off-by: Dave Liu <daveliu@freescale.com>
42087 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
42088 Author: Dave Liu <r63238@freescale.com>
42089 Date: Tue Sep 18 12:37:57 2007 +0800
42091 mpc83xx: Add the support of MPC837xEMDS board
42093 The MPC837xEMDS board support:
42094 * DDR2 400MHz hardcoded and SPD init
42095 * Local bus NOR Flash
42096 * I2C, UART, MII and RTC
42100 Signed-off-by: Dave Liu <daveliu@freescale.com>
42102 commit 555da61702771fe0f76f3de23b4e7590f3704161
42103 Author: Dave Liu <r63238@freescale.com>
42104 Date: Tue Sep 18 12:36:58 2007 +0800
42106 mpc83xx: Add the support of MPC8315E SoC
42108 The MPC8315E SoC including e300c3 core and new IP blocks,
42109 such as TDM, PCI Express and SATA controller.
42111 Signed-off-by: Dave Liu <daveliu@freescale.com>
42113 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
42114 Author: Dave Liu <r63238@freescale.com>
42115 Date: Tue Sep 18 12:36:11 2007 +0800
42117 mpc83xx: Add the support of MPC837x SoC
42119 The MPC837x SoC including e300c4 core and new IP blocks,
42120 such as SDHC, PCI Express and SATA controller.
42122 Signed-off-by: Dave Liu <daveliu@freescale.com>
42124 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
42125 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
42126 Date: Wed Nov 14 18:54:53 2007 +0300
42128 MPC8360E-MDS: configure and enable second UART
42130 Despite user manual, BCSR9.7 is negated (high) on HRST, so
42131 UART2 is disabled. Fix that and configure QE pins properly.
42133 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
42135 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
42136 Author: Timur Tabi <timur@freescale.com>
42137 Date: Mon Nov 5 09:34:06 2007 -0600
42139 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
42141 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
42142 currently-defined 83xx boards. This change guarantees that the environment
42143 will be located on the first flash sector after the U-Boot image.
42145 Signed-off-by: Timur Tabi <timur@freescale.com>
42146 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
42148 commit e05329516a13616b53240cd85b739217c2bf87f1
42149 Author: Larry Johnson <lrj@acm.org>
42150 Date: Fri Jan 4 13:27:02 2008 -0500
42152 ppc4xx: Remove weak binding from common Denali data-eye search code
42154 Now that there are no board-specific versions of
42155 "denali_core_search_data_eye()", the weak binding on the common version
42158 Signed-off-by: Larry Johnson <lrj@acm.org>
42160 commit 5ba576c01602fd328800a427964c36a0a05c5dce
42161 Author: Stefan Roese <sr@denx.de>
42162 Date: Sat Jan 5 09:13:46 2008 +0100
42164 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
42166 Signed-off-by: Stefan Roese <sr@denx.de>
42168 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
42169 Author: Stefan Roese <sr@denx.de>
42170 Date: Sat Jan 5 09:12:41 2008 +0100
42172 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
42174 On Katmai the complete auto-calibration somehow doesn't seem to
42175 produce the best results, meaning optimal values for RQFD/RFFD.
42176 This was discovered by GDA using a high bandwidth scope,
42177 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
42178 so now on Katmai "only" RFFD is auto-calibrated.
42180 This patch also adds RDCC calibration as mentioned on page 7 of
42181 the AMCC PowerPC440SP/SPe DDR2 application note:
42182 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
42184 Signed-off-by: Stefan Roese <sr@denx.de>
42186 commit 49db47b8ae6afff2b898be312948ff501357dc80
42187 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42188 Date: Wed Jan 2 16:48:42 2008 +0100
42190 ppc4xx: Remove sdram.h from PMC440 board
42192 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42194 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
42195 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42196 Date: Wed Jan 2 16:48:34 2008 +0100
42198 ppc4xx: use common denali core defines and data eye search code for PMC440
42200 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42202 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
42203 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42204 Date: Wed Jan 2 12:05:14 2008 +0100
42206 ppc4xx: More cleanup for esd's LCD code
42208 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42210 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
42211 Author: Stefan Roese <sr@denx.de>
42212 Date: Fri Jan 4 12:00:01 2008 +0100
42214 ppc4xx: Fix Sequoia NAND booting target
42216 The Sequoia NAND booting target now uses the recently extracted
42217 cpu/ppc4xx/denali_data_eye.c file too.
42219 Signed-off-by: Stefan Roese <sr@denx.de>
42221 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
42222 Author: Lawrence R. Johnson <lrj@acm.org>
42223 Date: Thu Jan 3 15:02:02 2008 -0500
42225 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
42227 Signed-off-by: Larry Johnson <lrj@acm.org>
42229 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
42230 Author: Lawrence R. Johnson <lrj@acm.org>
42231 Date: Fri Jan 4 02:11:56 2008 -0500
42233 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
42235 Note: this patch changes the configuration of some GPIO registers:
42237 Register Old Value New Value
42238 --------------- ---------- ----------
42239 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
42240 DCR GPIO0_TSRH 0x55005000 0x00000000
42241 DCR GPIO1_TCR 0xC2000000 0xE2000000
42242 DCR GPIO1_TSRL 0x0C000000 0x00200000
42243 DCR GPIO1_ISR2L 0x00050000 0x00110000
42245 Signed-off-by: Larry Johnson <lrj@acm.org>
42247 commit 5ab884b254ca2e707ab50545cd705f30108cf491
42248 Author: Lawrence R. Johnson <lrj@acm.org>
42249 Date: Thu Jan 3 18:54:00 2008 -0500
42251 ppc4xx: Add functionality to GPIO support
42253 This patch makes two additions to GPIO support:
42255 First, it adds function gpio_read_in_bit() to read the a bit from the
42256 GPIO Input Register (GPIOx_IR) in the same way that function
42257 gpio_read_out_bit() reads a bit from the GPIO Output Register
42260 Second, it modifies function gpio_set_chip_configuration() to provide
42261 an additional option for configuring the GPIO from the
42262 "CFG_4xx_GPIO_TABLE".
42264 According to the 440EPx User's Manual, when an alternate output is used,
42265 the three-state control is configured in one of two ways, depending on
42266 the particular output. The first option is to select the corresponding
42267 alternate three-state control in the GPIOx_TRSH/L registers. The second
42268 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
42269 the GPIOx_TRSH/L registers, and set the corresponding bit in the
42270 GPIOx_TCR register to enable the output. For example, the Manual
42271 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
42272 the alternate three-state control (first option), and specifies
42273 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
42274 enabled in the GPIOx_TCR register (second option).
42276 Currently, gpio_set_chip_configuration() configures all alternate signal
42277 outputs to use the first option. This patch allow the second option to
42278 be selected by setting the "out_val" element in the table entry to
42279 "GPIO_OUT_1". The first option is used when the "out_val" element is
42280 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
42281 alternate signal is selected, and because all current GPIO tables set
42282 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
42283 not change any existing configurations.
42285 Signed-off-by: Larry Johnson <lrj@acm.org>
42287 commit 196404cdc1de495d6182e84731c200fc5748df15
42288 Author: Larry Johnson <lrj@arlinx.com>
42289 Date: Sun Dec 30 01:01:54 2007 -0500
42291 PPC4xx: Remove sdram.h from board/lwmon5
42293 These definitions are now in "include/ppc440.h".
42295 Signed-off-by: Larry Johnson <lrj@acm.org>
42297 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
42298 Author: Larry Johnson <lrj@arlinx.com>
42299 Date: Sun Dec 30 01:01:32 2007 -0500
42301 PPC4xx: Use common code for LWMON5 board SDRAM support
42303 This patch also modifies the functionality of the code so that the data-eye
42304 search is now done with with the cache disabled.
42306 Signed-off-by: Larry Johnson <lrj@acm.org>
42308 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
42309 Author: Larry Johnson <lrj@arlinx.com>
42310 Date: Sun Dec 30 01:01:14 2007 -0500
42312 PPC4xx: Remove sdram.h from board/amcc/sequoia
42314 These definitions are now in "include/ppc440.h".
42316 Signed-off-by: Larry Johnson <lrj@acm.org>
42318 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
42319 Author: Larry Johnson <lrj@arlinx.com>
42320 Date: Sun Dec 30 01:00:50 2007 -0500
42322 PPC4xx: Use common code for Sequoia board SDRAM support
42324 Signed-off-by: Larry Johnson <lrj@acm.org>
42326 commit 8b0c5c127690335758100c25eaec2b84db97c101
42327 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42328 Date: Thu Dec 27 16:58:41 2007 +0100
42330 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
42332 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
42333 networking stack does not automatically switch to
42334 another interface. This patch does not touch the default
42337 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42338 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
42340 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
42341 Author: Upakul Barkakaty <upakul@gmail.com>
42342 Date: Thu Nov 29 12:16:13 2007 +0530
42344 NET: Proper return code handling in eth_init() function in file eth.c
42346 This patch modifies the return code handling in the eth_init()
42347 function, to be compatible with the handling of the return codes in
42348 the other network stack files. It now returns a 0 on Success and -1 on
42351 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
42352 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
42354 commit 5ca2d0953e4579a80810966cca2077e20d912c97
42355 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
42356 Date: Mon Nov 19 20:27:04 2007 +0900
42358 net/eth.c: Fix env_enetaddr signed overflow
42360 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
42363 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
42371 Warning: NEC-Candy MAC addresses don't match:
42372 Address in SROM is 00:00:4C:80:92:A2
42373 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
42375 This patch changes env_enetaddr type from `char' to `unsigned char'.
42377 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
42378 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
42379 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
42381 commit f85b60710571b37293d2233933b76e2aa3db5635
42382 Author: Rafal Jaworowski <raj@semihalf.com>
42383 Date: Thu Dec 27 18:19:02 2007 +0100
42385 Introduce new eth_receive routine
42387 The purpose of this routine is receiving a single network frame, outside of
42388 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
42389 U-Boot will let them utilise networking facilities. For sending a raw frame
42390 the already existing eth_send() can be used.
42392 The direct consumer of this routine is the newly introduced API layer for
42393 external applications (enabled with CONFIG_API).
42395 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
42396 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
42397 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
42399 commit 5c740711f0ea5b51414b341b71597c4a0751be74
42400 Author: Jon Loeliger <jdl@freescale.com>
42401 Date: Thu Jan 3 10:41:04 2008 -0600
42403 8610: Move include of config.h earlier.
42405 Include config.h earlier in the set of #includes
42406 so as to avoid a incidental and duplicate definition
42407 of CFG_CACHELINE_SIZE.
42409 Signed-off-by: Jon Loeliger
42411 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
42412 Author: Jon Loeliger <jdl@freescale.com>
42413 Date: Tue Dec 4 10:53:34 2007 -0600
42415 Don't slam #undef DEBUG in the 8641HPCN config file.
42417 Doing so prevents it from being individually set
42418 and useful in other files.
42420 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42422 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
42423 Author: Jon Loeliger <jdl@freescale.com>
42424 Date: Wed Nov 28 14:47:18 2007 -0600
42426 Convert MPC8641HPCN to use libfdt.
42428 Assumes the presence of the aliases node in the DTS to
42429 locate the ethernet, pci and serial nodes for fixups.
42431 Use consistent fdtaddr and fdtfile in environment variables.
42433 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42435 commit ce37422d0002e10490e268392e0c4e3028e52cec
42436 Author: Stefan Roese <sr@denx.de>
42437 Date: Wed Jan 2 14:06:26 2008 +0100
42439 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
42441 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
42442 flash chips connected to a 32bit wide port.
42444 Signed-off-by: Stefan Roese <sr@denx.de>
42446 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
42447 Author: Wolfgang Denk <wd@denx.de>
42448 Date: Wed Jan 2 15:58:44 2008 +0100
42450 Fix compile problem introduced by "cleanup" commit 3dfd708c
42452 Signed-off-by: Wolfgang Denk <wd@denx.de>
42454 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
42455 Author: Wolfgang Denk <wd@denx.de>
42456 Date: Wed Jan 2 15:54:45 2008 +0100
42458 Make scripts and Makefiles POSIX compliant
42460 The bash builtin versions of the "test" (resp. "[") command allow
42461 using "==" for string comparisons, but POSIX compatible implemen-
42462 tations (like /usr/bin/test) insist on using "=" only. On such systems
42465 $ /usr/bin/test a == a && echo OK
42466 /usr/bin/test: ==: binary operator expected
42468 This patch fixes Makefiles and scripts to use POSIX style.
42470 Signed-off-by: Wolfgang Denk <wd@denx.de>
42472 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
42473 Author: Stefan Roese <sr@denx.de>
42474 Date: Wed Jan 2 14:05:37 2008 +0100
42476 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
42478 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
42479 flash chips connected to a 32bit wide port.
42481 Signed-off-by: Stefan Roese <sr@denx.de>
42483 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
42484 Author: Wolfgang Denk <wd@denx.de>
42485 Date: Wed Jan 2 12:38:43 2008 +0100
42487 Minor coding style cleanup.
42489 Signed-off-by: Wolfgang Denk <wd@denx.de>
42491 commit e174ac34adf5d5653df12bc3cf19c52063a71269
42492 Author: Stefan Roese <sr@denx.de>
42493 Date: Fri Dec 28 17:29:56 2007 +0100
42495 ppc4xx: Coding style cleanup
42497 Signed-off-by: Stefan Roese <sr@denx.de>
42499 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
42500 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42501 Date: Fri Dec 28 17:07:24 2007 +0100
42503 ppc4xx: Complete PMC440 board support
42505 This patch brings the PMC440 board configuration file.
42506 Finally it enables the PMC440 board support.
42508 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42510 commit 407843a582560fc5231299561ab3c2b6b6cd3397
42511 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42512 Date: Fri Dec 28 17:07:18 2007 +0100
42514 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
42516 This patch adds some BSP commands and FPGA booting support
42517 for esd's PMC440 boards.
42519 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42521 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
42522 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42523 Date: Fri Dec 28 17:07:14 2007 +0100
42525 ppc4xx: Add initial esd PMC440 board files
42527 This patch adds the first files for the new esd PMC440 boards.
42528 The next two patches will complete the PMC440 board support.
42530 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42532 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
42533 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42534 Date: Fri Dec 28 17:10:36 2007 +0100
42536 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
42538 - add EEPROM write protection for esd PLU405 boards.
42539 - initialize NAND GPIOs
42540 - use correct io accessors
42543 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42545 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
42546 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42547 Date: Fri Dec 28 17:10:44 2007 +0100
42549 ppc4xx: use correct io accessors for esd's LCD code
42551 This patch fixes esd's LCD dectection code to work correctly with
42552 newer gcc versions.
42554 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42556 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
42557 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42558 Date: Fri Dec 28 17:10:42 2007 +0100
42560 ppc4xx: Maintenance patch for VOH405 boards
42562 - add EEPROM write protection
42563 - initialize NAND GPIOs
42564 - use correct io accessors
42565 - slow down I2C clock to 100kHz
42566 - enable ext. I2C bus
42569 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42571 commit c05569066dbcba3fdf36d4d1943df265dc316a86
42572 Author: Stefan Roese <sr@denx.de>
42573 Date: Fri Dec 28 16:08:08 2007 +0100
42575 ppc4xx: Enable 405EP PCI arbiter per default on all boards
42577 In an attmemt to clean up the 4xx start.S file, I removed the enabling
42578 of the internal 405EP PCI arbiter. This is needed for multiple other
42579 405EP platforms, like most of the esd 405EP. Now the internal PCI
42580 arbiter is enabled again per default as it has been before.
42582 Signed-off-by: Stefan Roese <sr@denx.de>
42583 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42585 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
42586 Author: Stefan Roese <sr@denx.de>
42587 Date: Fri Dec 28 15:53:46 2007 +0100
42589 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
42591 Signed-off-by: Stefan Roese <sr@denx.de>
42592 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42594 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
42595 Author: Stefan Roese <sr@denx.de>
42596 Date: Fri Dec 28 06:06:04 2007 +0100
42598 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
42600 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
42601 platforms mentioned above.
42603 Signed-off-by: Stefan Roese <sr@denx.de>
42605 commit b568fd25574181a3b12ae3d66b2913903442cb83
42606 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42607 Date: Thu Dec 27 17:03:46 2007 +0100
42609 Remove CPCI440 board
42611 This board never left prototyping state and it
42612 became a millstone round my neck. So remove it.
42614 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42616 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
42617 Author: Larry Johnson <lrj@arlinx.com>
42618 Date: Thu Dec 27 11:28:51 2007 -0500
42620 Add support for Korat PPC440EPx board
42622 These patches add support for the PPC440EPx-based "Korat" board to
42623 U-Boot. They are based primarily on support for the Sequoia board.
42625 Signed-off-by: Larry Johnson <lrj@acm.org>
42627 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
42628 Author: Larry Johnson <lrj@arlinx.com>
42629 Date: Sat Dec 22 15:16:25 2007 -0500
42631 Add configuration file for Korat board
42633 This patch supplies the configuration file for the Korat PPC440EPx-
42636 Signed-off-by: Larry Johnson <lrj@acm.org>
42638 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
42639 Author: Larry Johnson <lrj@arlinx.com>
42640 Date: Sat Dec 22 15:16:11 2007 -0500
42642 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
42644 Signed-off-by: Larry Johnson <lrj@acm.org>
42646 commit aba19604d848b2838cfb9ebe818909e6a216058e
42647 Author: Larry Johnson <lrj@arlinx.com>
42648 Date: Thu Dec 27 10:54:48 2007 -0500
42650 Add 440EPx DDR2 SPD DIMM support
42652 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
42653 controller. It should also work on the 440GRx. It is based on the DDR2
42654 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
42656 This code has been tested on prototype Korat boards with three Kingston
42657 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
42658 (two ranks). The Korat board has a single DIMM socket, but support has
42659 been provided (though not tested) for boards with two DIMM sockets.
42661 Signed-off-by: Larry Johnson <lrj@acm.org>
42663 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
42664 Author: Larry Johnson <lrj@arlinx.com>
42665 Date: Sat Dec 22 15:15:30 2007 -0500
42667 Copy 440EPx/GRx SDRAM data-eye search to common directory
42669 This patch creates a non-board-specific file for performing the SDRAM
42670 data-eye search. It also adds ECC error checking to the test of valid
42671 data on readback when ECC is enabled.
42673 Signed-off-by: Larry Johnson <lrj@acm.org>
42675 commit c46f53333b22b1f9098676bea8884fc7db820cf3
42676 Author: Larry Johnson <lrj@arlinx.com>
42677 Date: Sat Dec 22 15:15:13 2007 -0500
42679 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
42681 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
42682 It also fixes two typos in the definitions, so the board-specific
42683 "sdram.h" files containing these definitions are also fixed to avoid
42686 Signed-off-by: Larry Johnson <lrj@acm.org>
42688 commit c348578bf612d0c56d8d376d23cae16defbd86af
42689 Author: Larry Johnson <lrj@arlinx.com>
42690 Date: Thu Dec 27 10:50:55 2007 -0500
42692 Add Ethernet 1000BASE-X support for PPC4xx
42694 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
42695 is defined, the PHY will advertise it's capabilities for autonegotiation
42696 based on the capabilities shown in the PHY's status registers, including
42697 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
42698 advertise hard-coded capabilities, as before.
42700 Signed-off-by: Larry Johnson <lrj@acm.org>
42702 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
42703 Author: Larry Johnson <lrj@arlinx.com>
42704 Date: Thu Dec 27 09:52:17 2007 -0500
42706 Add driver for National Semiconductor LM73 temperature sensor
42708 This driver is based on the driver for the LM75.
42710 Signed-off-by: Larry Johnson <lrj@acm.org>
42712 commit 12618278688ea9b3d76536960a5ad2e3790fac40
42713 Author: Larry Johnson <lrj@arlinx.com>
42714 Date: Sat Dec 22 15:14:00 2007 -0500
42716 Add driver for STMicroelectronics M41T60 RTC
42718 This driver is based on the driver for the M41T11. In the intended
42719 application, the RTC will be powered by a large capacitor, rather than a
42720 battery. The driver therefore checks to see whether the RTC has lost
42721 power. The chip's OUT bit is normally reset from its power-up state. If
42722 the OUT bit is read as set, or if the date and time are not valid, then the
42723 RTC is assumed to have lost power, and its date and time are reset to
42724 1900-01-01 00:00:00.
42726 Support for adjusting the speed of the clock to improve accuracy is
42727 provided through an environment variable.
42729 Signed-off-by: Larry Johnson <lrj@acm.org>
42731 commit d3471173e14b7544bb60339eda8d3d3906694b0a
42732 Author: Larry Johnson <lrj@arlinx.com>
42733 Date: Sat Dec 22 15:34:39 2007 -0500
42735 Use out_be32() and friends to access memory-mapped registers in sequoia.c
42737 Signed-off-by: Larry Johnson <lrj@acm.org>
42739 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
42740 Author: Larry Johnson <lrj@arlinx.com>
42741 Date: Sat Dec 22 15:34:20 2007 -0500
42743 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
42745 Signed-off-by: Larry Johnson <lrj@acm.org>
42747 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
42748 Author: Larry Johnson <lrj@arlinx.com>
42749 Date: Sat Dec 22 15:23:50 2007 -0500
42751 Cosmetic changes to ECC POST for AMCC Denali core
42753 Signed-off-by: Larry Johnson <lrj@acm.org>
42755 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
42756 Author: Stefan Roese <sr@denx.de>
42757 Date: Wed Dec 26 20:20:19 2007 +0100
42759 ppc4xx: Fix compilation problem in 405 cache POST test
42761 Signed-off-by: Stefan Roese <sr@denx.de>
42763 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
42764 Author: Stefan Roese <sr@denx.de>
42765 Date: Sat Dec 22 12:20:09 2007 +0100
42767 ppc4xx: Move virtual address of POST cache test to bigger address
42769 On Sequoia & LWMON5 the virtual address of the POST cache test is now
42770 moved to a bigger address. This enables usage of more memory on those
42773 Signed-off-by: Stefan Roese <sr@denx.de>
42775 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
42776 Author: Stefan Roese <sr@denx.de>
42777 Date: Sat Dec 22 12:18:26 2007 +0100
42779 ppc4xx: Fix problem in 44x cache POST routine
42781 As repoted by Larry Johnson, running "diag run cache" caused a crash
42782 in U-Boot. This problem was introduced by a patch that removed the
42783 TLB entry for the cache test after the test has completed. Since this
42784 TLB was only setup once, a 2nd attempt to run this cache test
42785 failed with a crash. Now this TLB entry is created every time the
42788 Signed-off-by: Stefan Roese <sr@denx.de>
42790 commit b0265b576bb8fa9465f99e99c323768b562fadc2
42791 Author: Stefan Roese <sr@denx.de>
42792 Date: Fri Dec 21 07:51:29 2007 +0100
42794 ppc4xx: Update Makalu fdt support
42796 Signed-off-by: Stefan Roese <sr@denx.de>
42798 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
42799 Author: Stefan Roese <sr@denx.de>
42800 Date: Wed Dec 19 09:05:40 2007 +0100
42802 ppc4xx: Add fdt support to AMCC Katmai eval board
42804 Signed-off-by: Stefan Roese <sr@denx.de>
42806 commit 328a340392a5df9aaf00792be989df73e750859e
42807 Author: Stefan Roese <sr@denx.de>
42808 Date: Tue Dec 18 08:44:51 2007 +0100
42810 ppc4xx: fdt: Cleanup setup of cpu node setup
42812 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
42813 without using the absolute path to the cpu node. This makes it possible
42814 to use this U-Boot version with both versions of cpu-node naming
42815 "cpu@0" and the former "PowerPC,440EPx@0".
42817 Signed-off-by: Stefan Roese <sr@denx.de>
42819 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
42820 Author: Stefan Roese <sr@denx.de>
42821 Date: Mon Dec 17 17:26:21 2007 +0100
42823 ppc4xx: Fix lwmon5 compilation problem
42825 Now that the 440EPx ECC test is not board specific anymore
42826 remove this Makefile.
42828 Signed-off-by: Stefan Roese <sr@denx.de>
42830 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
42831 Author: Anatolij Gustschin <agustschin@t-online.de>
42832 Date: Wed Dec 5 17:43:20 2007 +0100
42834 Fix ppc4xx clear_bss() code
42836 ppc4xx clear_bss() fails if BSS segment size is not
42837 divisible by 4 without remainder. This patch provides
42838 fix for this problem.
42840 Signed-off-by: Anatolij Gustschin <agust@denx.de>
42842 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
42843 Author: Niklaus Giger <niklausgiger@gmx.ch>
42844 Date: Fri Nov 30 18:35:11 2007 +0100
42846 PPC4xx: Minimal changes to add vxWorks support
42848 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
42850 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
42851 Author: Markus Klotzbücher <mk@denx.de>
42852 Date: Fri Nov 23 13:09:18 2007 +0100
42854 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
42856 When using dhcp/bootp the "netmask" environment variable is not
42857 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
42858 desireable, so the following patch adds this this option to the board
42861 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
42862 Signed-off-by: Stefan Roese <sr@denx.de>
42864 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
42865 Author: Larry Johnson <lrj@arlinx.com>
42866 Date: Sat Oct 27 12:48:15 2007 -0400
42868 Fix/enhance ECC POST for 440EPx/GRx
42870 This patch allows the ECC POST to be used for different boards with the
42871 PPC440 Denali SDRAM controller. Modifications include skipping the test
42872 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
42873 to prevent timing errors.
42875 Signed-off-by: Larry Johnson <lrj@acm.org>
42877 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
42878 Author: Larry Johnson <lrj@arlinx.com>
42879 Date: Sat Oct 27 12:48:05 2007 -0400
42881 PPC4xx: Move/rename ECC POST for 440EPx/GRx
42883 Signed-off-by: Larry Johnson <lrj@acm.org>
42885 commit c29d2d3680046d430022c55e50fcb27f5866517e
42886 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42887 Date: Fri Dec 14 11:20:33 2007 +0100
42889 ppc4xx: use correct io accessors for 4xx ethernet POST
42891 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42893 commit ba79fde58a48c0a6ff8e2a96caba951594142203
42894 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42895 Date: Fri Dec 14 11:19:56 2007 +0100
42897 ppc4xx: fix flush + invalidate_dcache_range arguments
42899 flush + invalidate_dcache_range() expect the start and stop+1 address.
42900 So the stop address is the first address behind (!) the range.
42902 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
42904 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
42905 Author: Stefan Roese <sr@denx.de>
42906 Date: Fri Dec 14 08:41:29 2007 +0100
42908 ppc4xx: fdt: use fdt_fixup_ethernet()
42910 By using aliases in the dts file, the ethernet node fixup is
42911 much easier with the recently added functions.
42913 Please note that the dts file needs the aliases for this to work.
42915 Signed-off-by: Stefan Roese <sr@denx.de>
42917 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
42918 Author: Stefan Roese <sr@denx.de>
42919 Date: Thu Dec 13 14:52:53 2007 +0100
42921 ppc4xx: Bring 4xx fdt support up-to-date
42923 This patch update the 4xx fdt support. It enabled fdt booting
42924 on the AMCC Kilauea and Sequoia for now. More can follow later
42927 Signed-off-by: Stefan Roese <sr@denx.de>
42929 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
42930 Author: Stefan Roese <sr@denx.de>
42931 Date: Thu Dec 27 07:50:54 2007 +0100
42933 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
42935 The check for an sufficiently erased destination was missing in the
42936 buffered write function of the cfi flash driver (when
42937 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
42938 writing to such a region will fail with the currect error message.
42940 Signed-off-by: Stefan Roese <sr@denx.de>
42942 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
42943 Author: Martin Krause <martin.krause@tqs.de>
42944 Date: Mon Nov 12 10:56:17 2007 +0100
42946 Some configuration updates for the TQM5200 based TB5200 board:
42948 - enable command line history
42949 - increase malloc space (because of bigger flash sectors)
42951 Signed-off-by: Martin Krause <martin.krause@tqs.de>
42953 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
42954 Author: Martin Krause <martin.krause@tqs.de>
42955 Date: Thu Sep 27 11:10:08 2007 +0200
42957 TQM8xx: use the CFI flash driver on all TQM8xx boards
42959 Signed-off-by: Martin Krause <martin.krause@tqs.de>
42961 commit 11d9eec479b470eab9242ab937fca70a876d9376
42962 Author: Martin Krause <martin.krause@tqs.de>
42963 Date: Wed Sep 26 17:55:56 2007 +0200
42965 TQM885D: adjust for doubled flash sector size + some minor fixes
42967 Signed-off-by: Martin Krause <martin.krause@tqs.de>
42969 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
42970 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
42971 Date: Wed Sep 26 17:55:54 2007 +0200
42973 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
42975 CAS-Latency=2, Write Recovery Time tWR=2
42976 The max. supported bus frequency is 66 MHz. Therefore, changed
42977 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
42979 Signed-off-by: Martin Krause <martin.krause@tqs.de>
42981 commit b988b8cd443989be65161888eea0127ad03f846f
42982 Author: Martin Krause <martin.krause@tqs.de>
42983 Date: Wed Sep 26 17:55:56 2007 +0200
42985 TQM885D: use calculated cpuclk instead of measuring it
42987 On the TQM885D the measurement of cpuclk with the PIT reference
42988 timer ist not necessary. Since all module variants use the same
42989 external 10 MHz oscillator, the cpuclk only depends on the PLL
42990 configuration - which is readable by software.
42992 Signed-off-by: Martin Krause <martin.krause@tqs.de>
42994 commit 492c7049869348d31168de8dad89651315e468e0
42995 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
42996 Date: Thu Sep 27 14:54:46 2007 +0200
42998 TQM885D: fix SDRAM refresh
43000 At 133 MHz the current SDRAM refresh rate is too fast
43001 (measured 4 * 1.17 us).
43002 CFG_MAMR_PTA changes from 39 to 128. This result
43003 in a refresh rate of 4 * 7.8 us at the default clock
43004 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
43005 This is a compromise until a new method is found to
43006 adjust the refresh rate.
43008 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43010 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
43011 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
43012 Date: Thu Sep 27 14:54:46 2007 +0200
43014 TQM860M: Support for 10col SDRAMs, max. 128 MiB
43016 Signed-off-by: Martin Krause <martin.krause@tqs.de>
43018 commit 61fb15c516fef5631e305f1976d7b3a679725856
43019 Author: Wolfgang Denk <wd@denx.de>
43020 Date: Thu Dec 27 01:52:50 2007 +0100
43022 Fix coding style issues; update CHANGELOG.
43024 Signed-off-by: Wolfgang Denk <wd@denx.de>
43026 commit 467bcee11fe26ad422f2de971aa70866079870f2
43027 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43028 Date: Fri Dec 14 15:36:18 2007 +0100
43030 cfi_flash: Add manufacturer-specific fixups
43032 Run fixups based on the JEDEC manufacturer ID independent of the
43035 This changes current behaviour: Previously, geometry reversal for AMD
43036 chips were done based on the command set ID, while they are now done
43037 based on the JEDEC manufacturer and device ID.
43039 Also add fixup for top-boot Atmel chips. A fixup is needed for
43040 AT49BV6416(T) too, but since u-boot currently only reads the low byte
43041 of the device ID, there's no way to tell it apart from AT49BV642D,
43042 which should not have this fixup. Since AT49BV642D support is
43043 necessary to get ATNGW100 board support into mainline, I've commented
43044 out the fixup for now.
43046 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43048 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
43049 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43050 Date: Fri Dec 14 15:36:17 2007 +0100
43052 cfi_flash: Add cmdset-specific init functions
43054 Move things like reading JEDEC IDs and fixing up geometry reversal
43055 into separate functions. The geometry reversal fixup is now performed
43056 by altering the qry structure directly, which makes the sector init
43057 code slightly cleaner.
43059 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43061 commit e23741f4a6d8047520ef0d4971762749b3587d32
43062 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43063 Date: Fri Dec 14 15:36:16 2007 +0100
43065 cfi_flash: Read whole QRY structure in one go
43067 Read out the whole CFI Standard Query structure after successful cfi
43068 identification. This allows subsequent code to access this information
43069 directly without having to go through flash_read_uchar() and friends.
43071 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43073 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
43074 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43075 Date: Mon Dec 17 11:02:44 2007 +0100
43077 AVR32: Fix logic inversion in disable_interrupts()
43079 disable_interrupts() should return nonzero if interrupts were
43080 _enabled_ before, not disabled.
43082 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43084 commit acac475212cbedb17b321a363a1c878e2b47b37f
43085 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43086 Date: Fri Dec 14 16:51:22 2007 +0100
43088 AVR32: Enable interrupts at bootup
43090 The timer code depends on the timer interrupt to keep track of the
43091 upper 32 bits of the cycle counter. This obviously doesn't work when
43092 interrupts are disabled the whole time.
43094 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43096 commit 9570bcd87f4db255514f43b6701746c412f8fef0
43097 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43098 Date: Thu Nov 15 10:03:45 2007 +0100
43100 AVR32: Fix wrong pin setup for USART3
43102 As reported by Gerhard Berghofer:
43104 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
43105 instead of PB18 and PB19.
43107 which is obviously correct. There's currently no code that uses
43108 USART3, but custom boards may run into problems.
43110 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43112 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
43113 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43114 Date: Thu Nov 1 12:44:20 2007 +0100
43116 README: Remove ATSTK1000 daughterboard list
43118 As noted by Kim Phillips, these lists tend to become out of date.
43120 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43122 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
43123 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43124 Date: Tue Oct 30 14:56:36 2007 +0100
43126 Add ATSTK100[234] to MAINTAINERS
43128 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
43129 "mother". Also update the entry for ATSTK1000 to be not only about the
43130 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
43132 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43134 commit 64ff2357b1727213803591813dbc779c924bf772
43135 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43136 Date: Mon Oct 29 13:02:54 2007 +0100
43138 AVR32: Add support for the ATSTK1004 board
43140 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
43141 which is a derivative of AT32AP7000.
43143 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43145 commit 667568db157f374b85abd7e03596ddd1f0b25681
43146 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43147 Date: Mon Oct 29 13:02:54 2007 +0100
43149 AVR32: Add support for the ATSTK1003 board
43151 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
43152 which is a derivative of AT32AP7000.
43154 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43156 commit 5fee84a794a51ec830548cda485a770efb018b92
43157 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43158 Date: Mon Oct 29 13:23:33 2007 +0100
43160 AVR32: Make some AT32AP700x peripherals optional
43162 Add a chip-features file providing definitions of the form
43164 AT32AP700x_CHIP_HAS_<peripheral>
43166 to indicate the availability of the given peripheral on the currently
43169 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43171 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
43172 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43173 Date: Mon Oct 29 13:09:56 2007 +0100
43175 AVR32: Rename at32ap7000 -> at32ap700x
43177 The SoC-specific code for all the AT32AP700x CPUs is practically
43178 identical; the only difference is that some chips have less features
43179 than others. By doing this rename, we can add support for the AP7000
43180 derivatives simply by making some features conditional.
43182 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43184 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
43185 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43186 Date: Fri Jun 29 18:22:34 2007 +0200
43188 atmel_mci: Show SR when block read fails
43190 Show controller status as well as card status when an error occurs
43193 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43195 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
43196 Author: Stefan Roese <sr@denx.de>
43197 Date: Thu Dec 13 14:52:53 2007 +0100
43199 ppc4xx: Bring 4xx fdt support up-to-date
43201 This patch update the 4xx fdt support. It enabled fdt booting
43202 on the AMCC Kilauea and Sequoia for now. More can follow later
43205 Signed-off-by: Stefan Roese <sr@denx.de>
43207 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
43208 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43209 Date: Thu Dec 13 12:56:34 2007 +0100
43211 cfi_flash: Use map_physmem() and unmap_physmem()
43213 Use map_physmem() and unmap_physmem() to convert from physical to
43214 virtual addresses. This gives the arch a chance to provide an uncached
43215 mapping for flash accesses.
43217 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43219 commit 4d7d6936eb29af7cca330937808312aa5f61454d
43220 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43221 Date: Thu Dec 13 12:56:33 2007 +0100
43223 Introduce map_physmem() and unmap_physmem()
43225 map_physmem() returns a virtual address which can be used to access a
43226 given physical address without involving the cache. unmap_physmem()
43227 should be called when the virtual address returned by map_physmem() is
43230 This patch adds a stub implementation which simply returns the
43231 physical address cast to a uchar * for all architectures except AVR32,
43232 which converts the physical address to an uncached virtual mapping.
43233 unmap_physmem() is a no-op on all architectures, but if any
43234 architecture needs to do such mappings through the TLB, this is the
43235 hook where those TLB entries can be invalidated.
43237 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43239 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
43240 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43241 Date: Thu Dec 13 12:56:32 2007 +0100
43243 cfi_flash: Introduce read and write accessors
43245 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
43246 them to access the flash memory. This makes it clearer when the flash
43247 is actually being accessed; merely dereferencing a volatile pointer
43248 looks just like any other kind of access.
43250 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43252 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
43253 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43254 Date: Thu Dec 13 12:56:31 2007 +0100
43256 Implement __raw_{read,write}[bwl] on all architectures
43258 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
43259 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
43262 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43264 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
43265 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43266 Date: Sat Oct 6 18:55:36 2007 +0200
43268 cfi_flash: Reorder functions and eliminate extra prototypes
43270 Reorder the functions in cfi_flash.c so that each function only uses
43271 functions that have been defined before it. This allows the static
43272 prototype declarations near the top to be eliminated and might allow
43273 gcc to do a better job inlining functions.
43275 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43277 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
43278 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43279 Date: Thu Dec 13 12:56:29 2007 +0100
43281 cfi_flash: Make some needlessly global functions static
43283 Make functions not declared in any header file static.
43285 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43287 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
43288 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
43289 Date: Thu Dec 13 12:56:28 2007 +0100
43291 cfi_flash: Break long lines
43293 This patch tries to keep all lines in the cfi_flash driver below 80
43294 columns. There are a few lines left which don't fit this requirement
43295 because I couldn't find any trivial way to break them (i.e. it would
43296 take some restructuring, which I intend to do in a later patch.)
43298 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
43300 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
43301 Author: Bartlomiej Sieka <tur@semihalf.com>
43302 Date: Tue Dec 11 13:59:57 2007 +0100
43304 CFI: synchronize command offsets with Linux CFI driver
43306 Fixes non-working CFI Flash on the Inka4x0 board.
43308 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
43310 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
43311 Author: Kumar Gala <galak@kernel.crashing.org>
43312 Date: Fri Dec 7 12:17:34 2007 -0600
43314 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
43316 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
43317 (MPC8544DS, MPC8548CDS, MPC8568MDS).
43319 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43321 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
43322 Author: Kumar Gala <galak@kernel.crashing.org>
43323 Date: Fri Dec 7 12:04:30 2007 -0600
43325 Update Freescale MPC85xx ADS/CDS/MDS board config
43327 * Enabled CONFIG_CMD_ELF
43329 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43331 commit d435793229ce29a42797c1edc39f5b34f987f91a
43332 Author: Kumar Gala <galak@kernel.crashing.org>
43333 Date: Fri Dec 7 04:59:26 2007 -0600
43335 Handle Asynchronous DDR clock on 85xx
43337 The MPC8572 introduces the concept of an asynchronous DDR clock with
43338 regards to the platform clock.
43340 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
43343 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43345 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
43346 Author: Kumar Gala <galak@kernel.crashing.org>
43347 Date: Thu Nov 29 10:34:28 2007 -0600
43349 Update Freescale MPC85xx ADS/CDS/MDS board config
43351 * Removed some misc environment setup
43352 * Enabled CONFIG_CMDLINE_EDITING
43354 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43356 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
43357 Author: Kumar Gala <galak@kernel.crashing.org>
43358 Date: Thu Nov 29 10:47:44 2007 -0600
43360 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
43362 Minor path corrections needed to ensure buildability.
43364 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43366 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
43367 Author: Kumar Gala <galak@kernel.crashing.org>
43368 Date: Thu Nov 29 10:16:18 2007 -0600
43370 Move the MPC8540 ADS board under board/freescale.
43372 Minor path corrections needed to ensure buildability.
43374 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43376 commit 870ceac5b3a3486c109396e005af81ae762b5710
43377 Author: Kumar Gala <galak@kernel.crashing.org>
43378 Date: Thu Nov 29 10:14:50 2007 -0600
43380 Move the MPC8560 ADS board under board/freescale.
43382 Minor path corrections needed to ensure buildability.
43384 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43386 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
43387 Author: Kumar Gala <galak@kernel.crashing.org>
43388 Date: Thu Nov 29 10:13:47 2007 -0600
43390 Move the MPC8568 MDS board under board/freescale.
43392 Minor path corrections needed to ensure buildability.
43394 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43396 commit a853d56c59b33415304531443633808736acfc6e
43397 Author: Kumar Gala <galak@kernel.crashing.org>
43398 Date: Thu Nov 29 02:18:59 2007 -0600
43400 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
43402 We already had defines for LAWAR_TRGT_IF_* that we should use
43403 rather than creating new ones. Also, added some missing defines for
43406 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43408 commit 04db400892da37b76a585e332a0c137954ad2015
43409 Author: Kumar Gala <galak@kernel.crashing.org>
43410 Date: Thu Nov 29 02:10:09 2007 -0600
43412 Stop using immap_t on 85xx
43414 In the future the offsets to various blocks may not be in same location.
43415 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
43416 instead of getting it via &immap.
43418 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43420 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
43421 Author: Kumar Gala <galak@kernel.crashing.org>
43422 Date: Thu Nov 29 01:23:09 2007 -0600
43424 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
43426 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43428 commit c480861bf000156e6a3e932c258db59ff2212dd3
43429 Author: Kumar Gala <galak@kernel.crashing.org>
43430 Date: Thu Nov 29 01:06:19 2007 -0600
43432 Update MPC8568 MDS to use libfdt
43434 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
43435 ethernet, pci, and serial for the various fixups that are done.
43437 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43439 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
43440 Author: Haiying Wang <Haiying.Wang@freescale.com>
43441 Date: Wed Nov 14 15:52:06 2007 -0500
43443 Add PCI Express support on MPC8568MDS
43445 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
43446 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43448 commit b90d25497625b90ffa3f2911a0895ca237556ff5
43449 Author: Kumar Gala <galak@kernel.crashing.org>
43450 Date: Thu Nov 29 00:11:44 2007 -0600
43452 Update MPC85xx CDS to use libfdt
43454 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
43455 ethernet, pci, and serial for the various fixups that are done.
43457 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43459 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
43460 Author: Kumar Gala <galak@kernel.crashing.org>
43461 Date: Wed Nov 28 22:54:27 2007 -0600
43463 Update MPC8540 ADS to use libfdt
43465 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
43466 ethernet, pci, and serial for the various fixups that are done.
43468 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43470 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
43471 Author: Kumar Gala <galak@kernel.crashing.org>
43472 Date: Wed Nov 28 22:40:31 2007 -0600
43474 Update MPC8560 ADS to use libfdt
43476 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
43477 ethernet, pci, and serial for the various fixups that are done.
43479 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43481 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
43482 Author: Kumar Gala <galak@kernel.crashing.org>
43483 Date: Wed Nov 28 00:36:33 2007 -0600
43485 Stop using immap_t for cpm offset on 85xx
43487 In the future the offsets to various blocks may not be in same location.
43488 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
43489 instead of getting it via &immap->im_cpm.
43491 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43493 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
43494 Author: Kumar Gala <galak@kernel.crashing.org>
43495 Date: Tue Nov 27 23:25:02 2007 -0600
43497 Stop using immap_t for guts offset on 85xx
43499 In the future the offsets to various blocks may not be in same location.
43500 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
43501 instead of getting it via &immap->im_gur.
43503 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43505 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
43506 Author: Kumar Gala <galak@kernel.crashing.org>
43507 Date: Tue Nov 27 22:42:34 2007 -0600
43509 Update MPC8544 DS config
43511 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
43512 * Removed some misc environment setup
43513 * Moved to using fdtfile & fdtaddr as fdt env var names
43514 * Enabled CONFIG_CMDLINE_EDITING
43516 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43518 commit addce57e2e4c49e77ffb2020a84690713bb18b47
43519 Author: Kumar Gala <galak@kernel.crashing.org>
43520 Date: Mon Nov 26 17:12:24 2007 -0600
43522 Update MPC8544DS to use libfdt
43524 Updated the MPC8544DS config to use libfdt and assume use of aliases for
43525 ethernet, pci, and serial for the various fixups that are done.
43527 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43529 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
43530 Author: Kumar Gala <galak@kernel.crashing.org>
43531 Date: Thu Nov 29 00:15:30 2007 -0600
43533 Add libfdt based ft_cpu_setup for mpc85xx
43535 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43537 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
43538 Author: Stefan Roese <sr@denx.de>
43539 Date: Tue Dec 11 13:38:19 2007 +0100
43541 ppc4xx: Correct GPIO offset in gpio_config()
43543 Thanks to Gary Jennejohn for pointing this out.
43545 Signed-off-by: Stefan Roese <sr@denx.de>
43547 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
43548 Author: Stefan Roese <sr@denx.de>
43549 Date: Tue Dec 11 11:46:01 2007 +0100
43551 rtc: Fix merging problem
43553 Signed-off-by: Stefan Roese <sr@denx.de>
43555 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
43556 Author: Stefan Roese <sr@denx.de>
43557 Date: Sat Dec 8 14:47:34 2007 +0100
43559 ppc4xx: 405EX: Correctly enable USB pins
43561 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
43562 function control) registers. This is done for the AMCC Kilauea and
43563 Makalu eval boards.
43565 Signed-off-by: Stefan Roese <sr@denx.de>
43567 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
43568 Author: Stefan Roese <sr@denx.de>
43569 Date: Sat Dec 8 08:25:09 2007 +0100
43571 CFI: Coding style cleanup
43573 Signed-off-by: Stefan Roese <sr@denx.de>
43575 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
43576 Author: Michael Schwingen <michael@schwingen.org>
43577 Date: Fri Dec 7 23:35:02 2007 +0100
43579 CFI: support JEDEC flash roms in CFI-flash framework
43581 The following patch adds support for non-CFI flash ROMS, by hooking into the
43582 CFI flash code and using most of its code, as recently discussed here in the
43583 thread "Mixing CFI and non-CFI flashs".
43585 Signed-off-by: Michael Schwingen <michael@schwingen.org>
43586 Signed-off-by: Stefan Roese <sr@denx.de>
43588 commit c01b17dd856fa120b2970f50d9598546a4927ec3
43589 Author: Gerald Van Baren <vanbaren@cideas.com>
43590 Date: Wed Nov 28 21:24:50 2007 -0500
43592 Conditionally compile fdt_fixup_ethernet()
43594 Fix compiler warnings: On boards that don't have ethernets defined,
43595 don't compile fdt_fixup_ethernet().
43597 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
43598 Author: Kumar Gala <galak@kernel.crashing.org>
43599 Date: Tue Nov 27 21:59:46 2007 -0600
43601 Convert boards that set memory node to use fdt_fixup_memory()
43603 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43605 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
43606 Author: Kumar Gala <galak@kernel.crashing.org>
43607 Date: Mon Nov 26 17:06:15 2007 -0600
43609 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
43611 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
43612 determine which serial alias we should set linux,stdout-path to.
43614 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43616 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
43617 Author: Kumar Gala <galak@kernel.crashing.org>
43618 Date: Mon Nov 26 14:57:45 2007 -0600
43620 Add common memory fixup function
43622 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
43624 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43626 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
43627 Author: Kumar Gala <galak@kernel.crashing.org>
43628 Date: Mon Nov 26 11:19:12 2007 -0600
43630 Conditionally compile fdt_support.c
43632 Modify common/Makefile to conditionally compile fdt_support.c based
43633 on CONFIG_OF_LIBFDT.
43635 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43637 commit d88e7ba0980773479e1a64badb293116071b7ef0
43638 Author: Kumar Gala <galak@kernel.crashing.org>
43639 Date: Mon Nov 26 10:41:40 2007 -0600
43641 Fix build breakage due to libfdt import
43643 The IDS8247 got lost in the update and need an API update
43644 do to rename of functions in libfdt.
43646 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
43648 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
43649 Author: Gerald Van Baren <vanbaren@cideas.com>
43650 Date: Fri Nov 23 19:43:20 2007 -0500
43652 Add spaces around the = in the fdt print format.
43654 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
43656 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
43657 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43658 Date: Fri Dec 7 01:25:38 2007 +0900
43660 sh: Moved driver of the SuperH dependence
43662 The composition of the directory in the drivers/ changed.
43663 I moved SuperH serial driver and marubun PCMCIA driver.
43665 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43667 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
43668 Author: Wolfgang Denk <wd@denx.de>
43669 Date: Thu Dec 6 10:21:19 2007 +0100
43673 Signed-off-by: Wolfgang Denk <wd@denx.de>
43675 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
43676 Author: Wolfgang Denk <wd@denx.de>
43677 Date: Thu Dec 6 10:21:03 2007 +0100
43679 ADS5121 Board: fix compile problem.
43681 Signed-off-by: Wolfgang Denk <wd@denx.de>
43683 commit a27044b14a9e93678a82d7b35f202b93e7687abc
43684 Author: Stefan Roese <sr@denx.de>
43685 Date: Thu Dec 6 05:58:43 2007 +0100
43687 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
43689 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
43690 setting the FIXD bit in the SDR0_MFR register. Here a description of the
43693 Problem Description
43694 ------------------------------
43695 If a DMA is performed between memory and PCI with the DMA 1 Controller
43696 using prefetch, and as a result uses a special purpose buffer selected by
43697 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
43698 the first part of the transfer sequence is performed twice. The
43699 PPC440SPe PCI Controller requests more data than was needed such that in
43700 the case of enforce memory protection, a host CPU exception can occur.
43701 No data is corrupted, because data transfer is stopped in the PCI
43702 Controller. Prefetch enable is specified by setting DMA Configuration
43703 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
43705 Behavior that may be observed in a running system
43706 ---------------------------------------------------------------------------
43708 1. DMA performance is decreased because of the double access on the PCI bus
43710 2. If an illegal access to some address on the PCI bus is detected at the
43711 system level, a machine check or similar system error may occur.
43713 Workarounds Available
43714 ----------------------------------
43716 1. Do not program prefetch. Note that a prefetch command cannot be programmed
43717 without selecting a special purpose buffer.
43718 2. To avoid crossing a physical boundary of the PCI slave device, add 512
43719 bytes of address to the PCI address range.
43721 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
43722 from AMCC and slighly changed.
43724 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
43725 Signed-off-by: Stefan Roese <sr@denx.de>
43727 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
43728 Author: Stefan Roese <sr@denx.de>
43729 Date: Tue Dec 4 16:29:48 2007 +0100
43731 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
43733 Signed-off-by: Stefan Roese <sr@denx.de>
43735 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
43736 Author: Wolfgang Denk <wd@denx.de>
43737 Date: Mon Dec 3 00:15:28 2007 +0100
43739 Prepare for 1.3.1-rc1
43741 Signed-off-by: Wolfgang Denk <wd@denx.de>
43743 commit e15e33433e7c05111968dc9b434a52fd42cbd221
43744 Author: Stefan Roese <sr@denx.de>
43745 Date: Fri Nov 30 07:15:41 2007 +0100
43747 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
43749 This manual PCIe reset triggering solves the problem seen with the
43750 Intel EPRO/1000 card, which was not detected (link not established)
43751 upon power-up reset.
43753 Signed-off-by: Stefan Roese <sr@denx.de>
43755 commit 260eea5676ca46903a335686cc020b29c4ca46fe
43756 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43757 Date: Thu Nov 29 01:21:54 2007 +0900
43759 sh: Add SuperH boards maintainer to MAINTAINERS file
43761 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
43763 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43765 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
43766 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43767 Date: Thu Nov 29 00:13:04 2007 +0900
43769 sh: Add ms7750se support in MAKEALL
43771 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43773 commit c7144373427a178332bf9754131c8c34c52c200a
43774 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43775 Date: Tue Nov 27 09:44:53 2007 +0100
43777 sh: Add sh3 and sh4 support in MAKEALL
43779 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43780 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43782 commit 130080874a3d28450098481a262c5f7c855e908d
43783 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43784 Date: Sun Nov 25 02:51:17 2007 +0900
43786 sh: Add document for SuperH.
43788 This document is a summary of information concerning SuperH of U-Boot.
43790 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43792 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
43793 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43794 Date: Sun Nov 25 02:39:31 2007 +0900
43796 sh: Add marubun's pcmcia driver
43798 Marubun pcmcia is a chip for PCMCIA used with SuperH.
43799 Of course, this can be used even by other architectures.
43800 When use this driver, came to be able to use CompactFlash
43803 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43805 commit febd86b969b975289ed948f1ac0eb9722da41ced
43806 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43807 Date: Sun Nov 25 02:32:13 2007 +0900
43809 sh: Update SuperH SCIF driver
43811 - Changed volatile unsigned to vu_.
43812 - Changed Makefile for kconfig.
43814 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
43816 commit 8be760903645af09871be50ad0a6f9ebb62b311d
43817 Author: Stefan Roese <sr@denx.de>
43818 Date: Tue Nov 27 11:57:35 2007 +0100
43820 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
43822 After an error in the AMCC 405EX users manual now correctly configure
43823 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
43826 Signed-off-by: Stefan Roese <sr@denx.de>
43828 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
43829 Author: Wolfgang Denk <wd@denx.de>
43830 Date: Mon Nov 26 19:18:21 2007 +0100
43832 Cleanup coding style; update CHANGELOG
43834 Signed-off-by: Wolfgang Denk <wd@denx.de>
43836 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
43837 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43838 Date: Sun Nov 25 22:39:25 2007 +0100
43840 MAKEALL: add missing 512x boards in ppc
43842 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43844 commit a340c325e668ca7386c2276387681720be9c3757
43845 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43846 Date: Sun Nov 25 18:45:47 2007 +0100
43848 Makefile : fix tags ctags etags with new drivers organization
43850 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43852 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
43853 Author: Stefan Roese <sr@denx.de>
43854 Date: Mon Nov 26 15:06:14 2007 +0100
43856 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
43858 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
43861 Signed-off-by: Stefan Roese <sr@denx.de>
43863 commit ca1ce226287270bb01e25b8e3674c701f12edf19
43864 Author: Stefan Roese <sr@denx.de>
43865 Date: Mon Nov 26 15:01:45 2007 +0100
43867 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
43869 Signed-off-by: Stefan Roese <sr@denx.de>
43871 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
43872 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43873 Date: Sun Nov 25 18:45:47 2007 +0100
43875 Makefile : fix tags ctags etags with new drivers organization
43877 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43879 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
43880 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43881 Date: Sat Nov 24 21:26:56 2007 +0100
43883 drivers/mtd : move mtd drivers to drivers/mtd
43885 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43887 commit 318c0b90431f2648552e5ade78833f42652ce859
43888 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43889 Date: Sat Nov 24 21:17:55 2007 +0100
43891 drivers/misc : move misc drivers to drivers/misc
43893 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43895 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
43896 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43897 Date: Sat Nov 24 21:13:59 2007 +0100
43899 drivers/block : move block drivers to drivers/block
43901 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43903 commit 0c698dcaa70275eb8814f665b545547cee013892
43904 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43905 Date: Sat Nov 24 20:59:50 2007 +0100
43907 drivers/rtc : move rtc drivers to drivers/rtc
43909 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43911 commit f868cc5a50757d94f36c312395481cb0f187d9e6
43912 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43913 Date: Sat Nov 24 20:14:44 2007 +0100
43915 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
43917 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43919 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
43920 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43921 Date: Sat Nov 24 19:46:45 2007 +0100
43923 drivers/input : move input drivers to drivers/input
43925 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43927 commit e4558666293364fc3af1c1d9381ca933fa0f1275
43928 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43929 Date: Sat Nov 24 19:40:11 2007 +0100
43931 drivers/usb : move usb drivers to drivers/usb
43933 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43935 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
43936 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43937 Date: Sat Nov 24 19:33:38 2007 +0100
43939 drivers/serial : move serial drivers to drivers/serial
43941 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43943 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
43944 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43945 Date: Wed Nov 21 21:19:24 2007 +0100
43947 drivers/net : move net drivers to drivers/net
43949 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43951 commit 352d259130b349fe9593b8dada641bd78a9659e5
43952 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43953 Date: Tue Nov 20 20:41:48 2007 +0100
43955 drivers/video : move video drivers to drivers/video
43957 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43959 commit 73646217186aa17afc8e305c5f06f06dd335eaad
43960 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43961 Date: Tue Nov 20 20:33:09 2007 +0100
43963 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
43965 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43967 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
43968 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43969 Date: Tue Nov 20 20:28:09 2007 +0100
43971 drivers/pci : move pci drivers to drivers/pci
43973 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
43975 commit 9162352817579840d7802da6d85872b3ca003c97
43976 Author: Gerald Van Baren <vanbaren@cideas.com>
43977 Date: Thu Nov 22 17:23:23 2007 -0500
43979 Fix fdt printing for updated libfdt
43981 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
43983 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
43985 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
43986 Author: Kumar Gala <galak@kernel.crashing.org>
43987 Date: Wed Nov 21 13:30:15 2007 -0600
43989 Add additional fdt fixup helper functions
43991 Added the following fdt fixup helpers:
43992 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
43993 * do_fixup_by_compat{_u32} - Find matching nodes by compat
43995 The _u32 variants work the same only the property they are setting
43996 is know to be a 32-bit integer instead of a byte buffer.
43998 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44000 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
44001 Author: Kumar Gala <galak@kernel.crashing.org>
44002 Date: Wed Nov 21 11:11:03 2007 -0600
44004 Add fdt_fixup_ethernet helper to set mac addresses
44006 Added a fixup helper that uses aliases to set mac addresses
44007 in the device tree based on the bd_t
44009 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44011 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
44012 Author: Kumar Gala <galak@kernel.crashing.org>
44013 Date: Wed Nov 21 14:07:46 2007 -0600
44015 Fix warnings from import of libfdt
44017 cmd_fdt.c: In function fdt_print:
44018 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
44019 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
44020 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
44021 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
44023 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44025 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
44026 Author: Kumar Gala <galak@kernel.crashing.org>
44027 Date: Wed Oct 24 11:04:22 2007 -0500
44029 Update libfdt from device tree compiler (dtc)
44031 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
44032 the device tree compiler (dtc) project.
44034 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44036 commit e93becf80d732b64aef81b23e8b6ece02c40533d
44037 Author: Kumar Gala <galak@kernel.crashing.org>
44038 Date: Sat Nov 3 19:46:28 2007 -0500
44040 Move do_fixup* for libfdt into common code
44042 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
44043 into common/fdt_support.c and renamed:
44045 do_fixup() -> do_fixup_by_path()
44046 do_fixup_u32() -> do_fixup_by_path_u32()
44048 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44050 commit f738b4a75998f42a7408defadc9baac7a31c92db
44051 Author: Kumar Gala <galak@kernel.crashing.org>
44052 Date: Thu Oct 25 16:15:07 2007 -0500
44054 Make no options to fdt print default to '/'
44056 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44058 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
44059 Author: Kumar Gala <galak@kernel.crashing.org>
44060 Date: Wed Oct 24 10:21:57 2007 -0500
44062 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
44065 fdt_node_is_compatible
44066 fdt_find_node_by_type
44067 fdt_find_compatible_node
44069 To ease merge of newer libfdt as we aren't using them anywhere at this time.
44071 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
44074 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44076 commit 98e2867cc85409b919f862e6c16026461ec955df
44077 Author: Grant Likely <grant.likely@secretlab.ca>
44078 Date: Wed Nov 21 09:19:37 2007 -0700
44080 [BUILD] Remove libraries when updating autoconf.mk
44082 Fix library problems caused by conditional compilation. Using
44083 autoconf.mk to decide which files to compile has caused a problem when
44084 changing configuration from one board to another without clearing out
44085 the library (*.a) files.
44087 It used to be that the linker was always passed the same list of .o
44088 files when building the .a files. However, that is not longer true
44089 with conditional compilation. Now, a different board config will have
44090 a different file list passed to the linker. The problem occurs when
44091 a library has already been built and the board config is changed.
44093 Since the linker will update instead of replace a preexisting library,
44094 then if the file list changes to remove some object files the old
44095 objects will still exist in the library.
44097 The solution is to remove all old library files when autoconf.mk is
44100 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44102 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
44103 Author: Kumar Gala <galak@kernel.crashing.org>
44104 Date: Wed Nov 21 08:49:50 2007 -0600
44106 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
44108 Modify libfdt/Makefile to conditionally compile the *.c files based
44109 on the board config.
44111 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
44113 commit 4a43719a7738712811d822ca8125427b27a55cdc
44114 Author: Grant Likely <grant.likely@secretlab.ca>
44115 Date: Mon Sep 24 09:05:31 2007 -0600
44117 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
44119 Modify common/Makefile to conditionally compile the cmd_*.c files based
44120 on the board config.
44122 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44124 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
44125 Author: Grant Likely <grant.likely@secretlab.ca>
44126 Date: Mon Sep 24 09:05:31 2007 -0600
44128 [BUILD] Generate include/autoconf.mk from board config files
44130 Use cpp and sed to postprocess config.h and import the defined values
44131 into include/autoconf.mk. autoconf.mk is then included by config.mk to
44132 give 'make' access to the board configuration.
44134 Doing this enables conditional compilation at the Makefile level instead
44135 of by wrapping every .c file with #ifdef/#endif wrappers.
44137 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44139 commit 68b88999da87ab88e71e1306192905be3450198e
44140 Author: Jon Loeliger <jdl@freescale.com>
44141 Date: Tue Nov 20 15:02:26 2007 -0600
44143 8610HPCD: Enable the 8610 Display Interface Unit
44145 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44147 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
44148 Author: Jon Loeliger <jdl@freescale.com>
44149 Date: Tue Nov 20 15:00:53 2007 -0600
44151 Move 8610 DIU interface structure definitions to header file.
44153 These two structures are still needed during the
44154 initialization and setup of the DIU hardware.
44155 So move them to the fsl_diu_fb.h file for now.
44158 Noticed-by: York Sun <yorksun@freescale.com>
44159 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44161 commit 080c646dbf474a109c3f85718fb01ce042a38c45
44162 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44163 Date: Tue Nov 20 20:14:18 2007 +0100
44165 drivers/i2c : move i2c drivers to drivers/i2c
44167 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44169 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
44170 Author: Wolfgang Denk <wd@denx.de>
44171 Date: Mon Nov 19 22:20:24 2007 +0100
44173 Prepare for 1.3.0 release.
44175 Signed-off-by: Wolfgang Denk <wd@denx.de>
44177 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
44178 Author: Haiying Wang <Haiying.Wang@freescale.com>
44179 Date: Mon Nov 19 10:02:13 2007 -0500
44181 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
44183 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
44185 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
44187 commit f8c320609366176b31104d9bf5e295232e1c7f1d
44188 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
44189 Date: Mon Nov 19 11:14:16 2007 +0900
44191 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
44193 lowlevel_init.S: Assembler messages:
44194 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
44196 Looking at codes, the `memtest' and `clearmem' are intentional mixed
44197 use of `global symbols' and `label' for debugging purpose. To make it
44198 build, just disable global-symbols-use for now. As a result `memtest'
44199 still remains as unused, but leave it be...
44201 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
44203 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
44204 Author: Wolfgang Denk <wd@denx.de>
44205 Date: Mon Nov 19 12:59:14 2007 +0100
44207 Fix build problems with mp2usb board
44209 Signed-off-by: Wolfgang Denk <wd@denx.de>
44211 commit 6bf4c686afca1e86e1c384d59218f914605713bf
44212 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44213 Date: Sun Nov 18 18:36:11 2007 +0100
44215 s3c24x0: Fix usb_ohci.c missing in Makefile
44216 and usb_ohci.c warning differ in signedness
44218 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44220 commit 6073f61e078da5ddb521b56256bcc36508589883
44221 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44222 Date: Sun Nov 18 12:55:02 2007 +0100
44224 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
44226 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44228 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
44229 Author: Wolfgang Denk <wd@denx.de>
44230 Date: Sun Nov 18 17:11:09 2007 +0100
44232 Fix compiler warnings for ARM systems.
44234 Signed-off-by: Wolfgang Denk <wd@denx.de>
44236 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
44237 Author: Wolfgang Denk <wd@denx.de>
44238 Date: Sun Nov 18 16:36:27 2007 +0100
44240 Fix compiler warnings for PPC systems. Update CHANGELOG.
44242 Signed-off-by: Wolfgang Denk <wd@denx.de>
44244 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
44245 Author: Stefan Roese <sr@denx.de>
44246 Date: Sun Nov 18 14:44:44 2007 +0100
44248 ppc4xx: Correct 405EX PCIe UTL register mapping
44250 Map 4k mem space for UTL registers for each port.
44252 Signed-off-by: Stefan Roese <sr@denx.de>
44254 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
44255 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44256 Date: Sat Nov 17 11:31:10 2007 +0100
44258 Fix warning differ in signedness in net/net.c and net/nfs.c
44260 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
44261 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44262 Date: Sat Nov 17 20:42:45 2007 +0900
44264 gth2.c: Fix a warning on gth2 build.
44266 gth2.c: In function 'misc_init_r':
44267 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
44269 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44271 commit 2309c130aa4c84b91bd874a41269c923eb61b555
44272 Author: Stefan Roese <sr@denx.de>
44273 Date: Sat Nov 17 07:58:25 2007 +0100
44275 Fix warning differ in signedness in common/cmd_scsi.c
44277 Signed-off-by: Stefan Roese <sr@denx.de>
44279 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
44280 Author: Stefan Roese <sr@denx.de>
44281 Date: Sat Nov 17 14:52:29 2007 +0100
44283 ppc4xx: Update AMCC Kilauea config file
44285 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
44287 Signed-off-by: Stefan Roese <sr@denx.de>
44289 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
44290 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44291 Date: Sat Nov 17 20:05:26 2007 +0900
44293 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
44295 Current trick to pick up GNU assembler minor version does not work with the
44296 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
44299 $ sde-as --version |grep "GNU assembler"
44300 GNU assembler 2.15.94 mipssde-6.02.02-20050602
44301 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
44303 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
44307 $ mips-linux-as --version |grep "GNU assembler"
44308 GNU assembler (GNU Binutils) 2.18
44309 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
44311 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
44315 As a result of above, you'll see many noises with such binutils:
44318 /bin/sh: line 0: [: : integer expression expected
44319 /bin/sh: line 0: [: : integer expression expected
44320 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
44321 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
44322 /bin/sh: line 0: [: : integer expression expected
44323 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
44324 /bin/sh: line 0: [: : integer expression expected
44325 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
44326 /bin/sh: line 0: [: : integer expression expected
44328 This patch simplifies the trick and makes it work with both versions of gas.
44329 I also replace an expensive `awk (or gawk)' with `cut'.
44331 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44333 commit 16664f72850846e645616da1c0fa5afcd6d15f15
44334 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44335 Date: Sat Nov 17 20:05:26 2007 +0900
44337 [MIPS] Remove useless instructions for initializing $gp.
44339 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44341 commit 03c031d5660ea946c39af6e2e16267da857c609f
44342 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44343 Date: Sat Oct 27 15:27:06 2007 +0900
44345 [MIPS] MIPS 4K core: Coding style cleanups
44347 No logical changes.
44349 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44351 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
44352 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44353 Date: Sat Nov 17 20:05:20 2007 +0900
44355 [MIPS] gth2.c: Fix a warning on gth2 build.
44357 gth2.c: In function 'misc_init_r':
44358 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
44360 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44362 commit 4fbd0741b2b6441da10be93e10267122581b7079
44363 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44364 Date: Sat Oct 27 15:22:33 2007 +0900
44366 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
44368 au1x00_eth.c: In function 'au1x00_miiphy_write':
44369 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
44371 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44373 commit f01320459736f156707425cf8112f98606301aa4
44374 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44375 Date: Sat Oct 27 15:00:25 2007 +0900
44377 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
44379 au1x00_eth.c: In function 'au1x00_enet_initialize':
44380 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
44381 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
44382 au1x00_eth.c:246: error: for each function it appears in.)
44383 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
44384 au1x00_eth.c: In function 'au1x00_miiphy_write':
44385 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
44386 make[1]: *** [au1x00_eth.o] Error 1
44388 Fixed by moving these two functions forward.
44390 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44392 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
44393 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44394 Date: Sat Oct 27 15:00:25 2007 +0900
44396 MAKEALL: Added missing pb1000 board
44398 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44400 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
44401 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44402 Date: Sat Oct 27 15:00:24 2007 +0900
44404 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
44406 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44408 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
44409 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44410 Date: Sat Oct 27 15:00:24 2007 +0900
44412 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
44414 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44416 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
44417 Author: Wolfgang Denk <wd@denx.de>
44418 Date: Sat Nov 17 02:34:38 2007 +0100
44420 Update CHANGELOIG, prepare for -rc4
44422 Signed-off-by: Wolfgang Denk <wd@denx.de>
44424 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
44425 Author: Luotao Fu <l.fu@pengutronix.de>
44426 Date: Wed Nov 14 18:58:33 2007 +0100
44428 Fix the i2c frequency and default address in rsdproto board
44430 rsdproto board support has wrong I2C frequency and wrong return value
44433 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
44435 commit 429c180edad038f91c989cb14b478228092e7054
44436 Author: Wolfgang Denk <wd@denx.de>
44437 Date: Sat Nov 17 01:45:38 2007 +0100
44439 powerpc: Backout relocation changes for MPC5121, too.
44441 Apply Grant Likely's backout to MPC5121 code, too.
44443 Pointed out by Rafal Jaworowski <raj@semihalf.com>
44445 Signed-off-by: Wolfgang Denk <wd@denx.de>
44447 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
44448 Author: Grant Likely <grant.likely@secretlab.ca>
44449 Date: Tue Nov 13 22:18:33 2007 -0700
44451 powerpc: Backout relocation changes.
44453 Ugh. I *hate* to back this change out, but these compiler flags don't
44454 work for relocation on all versions of GCC. I've not been able to
44455 reproduce the environment in my setup (and hence, not been able to
44456 find a combination that *does* work), so I've got no choice but to go
44457 back to the old gcc flags and linker script.
44459 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44461 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
44462 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44463 Date: Tue Nov 13 09:11:05 2007 +0100
44465 Fixed mips_io_port_base build errors.
44467 This patch has been sent on:
44470 Although mips_io_port_base is currently a part of IDE command, it is quite
44471 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
44472 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
44474 This patch is triggered by multiple definition of `mips_io_port_base' build
44475 error on gth2 (and tb0229 also needs this fix.)
44477 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
44478 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
44479 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
44480 make: *** [u-boot] Error 1
44482 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
44483 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44485 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
44486 Author: Wolfgang Denk <wd@denx.de>
44487 Date: Sat Nov 17 01:30:40 2007 +0100
44489 Fix a bug in the slave serial programming mode for the Xilinx
44490 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
44491 the most significant bit was set, which did not work on any
44492 architecture where "char" defaulted to be an unsigned type.
44494 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
44496 Signed-off-by: Wolfgang Denk <wd@denx.de>
44498 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
44499 Author: Jon Loeliger <jdl@freescale.com>
44500 Date: Thu Nov 1 12:23:29 2007 -0500
44502 86xx: Fix broken variable reference when #def DEBUGing.
44504 Sometimes you can't reference the DDR2 controller variables.
44506 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44508 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
44509 Author: Jason Jin <Jason.jin@freescale.com>
44510 Date: Fri Oct 26 18:32:00 2007 +0800
44512 make 8610 board use pixis reset
44514 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
44516 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
44517 Author: Jason Jin <Jason.jin@freescale.com>
44518 Date: Mon Oct 29 19:26:21 2007 +0800
44520 Unify pixis_reset altbank across board families
44522 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
44523 into the separate board config files.
44525 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
44526 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44528 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
44529 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44530 Date: Wed Nov 7 08:19:21 2007 +0100
44532 Fix warning: pointer targets in assignment differ in signedness
44534 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44536 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
44537 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44538 Date: Wed Nov 7 08:19:19 2007 +0100
44540 Fix warning differ in signedness in common/cmd_ide.c
44542 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
44544 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
44545 Author: Stefan Roese <sr@denx.de>
44546 Date: Fri Nov 16 14:16:54 2007 +0100
44548 ppc4xx: Enable 405EX PCIe UTL register configuration
44550 Till now the UTL registers on 405EX were not initialized but left with
44551 their default values. This patch new initializes some of the UTL
44552 registers on 405EX.
44554 Signed-off-by: Stefan Roese <sr@denx.de>
44556 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
44557 Author: Stefan Roese <sr@denx.de>
44558 Date: Fri Nov 16 14:00:59 2007 +0100
44560 ppc4xx: Update AMCC Makalu for board rev 1.1
44562 This patch adds changes needed for Makalu rev 1.1:
44564 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
44565 - Enable 2nd ethernet port EMAC1
44566 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
44567 - Reset PCIe ports via GPIO upon bootup
44569 Signed-off-by: Stefan Roese <sr@denx.de>
44571 commit 4d4faae65e115e327425cd514c1a35146a85166b
44572 Author: Grant Likely <grant.likely@secretlab.ca>
44573 Date: Mon Sep 24 09:05:31 2007 -0600
44575 Group PCI and PCMCIA drivers in drivers/Makefile
44577 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44579 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
44580 Author: Grant Likely <grant.likely@secretlab.ca>
44581 Date: Mon Sep 24 09:05:31 2007 -0600
44583 Group block/flash drivers in drivers/Makefile
44585 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44587 commit df58c81551700f058b44cacf55a7997fa63bfe0a
44588 Author: Grant Likely <grant.likely@secretlab.ca>
44589 Date: Mon Sep 24 09:05:31 2007 -0600
44591 Group USB drivers in drivers/Makefile
44593 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44595 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
44596 Author: Grant Likely <grant.likely@secretlab.ca>
44597 Date: Mon Sep 24 09:05:30 2007 -0600
44599 Group i2c drivers in drivers/Makefile
44601 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44603 commit ec00c76de0e5971273905998d62d6bb119324218
44604 Author: Grant Likely <grant.likely@secretlab.ca>
44605 Date: Mon Sep 24 09:05:30 2007 -0600
44607 Group console drivers in drivers/Makefile
44609 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44611 commit 754f230aa01b8c789fc31f8013c2487954073300
44612 Author: Grant Likely <grant.likely@secretlab.ca>
44613 Date: Mon Sep 24 09:05:30 2007 -0600
44615 Group network drivers in drivers/Makefile
44617 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44619 commit f0037c56b0d12cd46215124667b9f83d60ef9391
44620 Author: Grant Likely <grant.likely@secretlab.ca>
44621 Date: Mon Sep 24 09:05:30 2007 -0600
44623 Build: split COBJS value into multiple lines
44625 This change is in preparation for condtitionial compile support in the
44626 build system. By spliting them all into seperate lines now, subsequent
44627 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
44628 be less invasive and easier to review
44630 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44632 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
44633 Author: Grant Likely <grant.likely@secretlab.ca>
44634 Date: Mon Sep 24 09:05:30 2007 -0600
44636 Add .gitignore files
44638 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44639 Acked-by: Kim Phillips <kim.phillips@freescale.com>
44641 commit 955413f35f054a82e40042f1dbcf501c6a05719b
44642 Author: Grant Likely <grant.likely@secretlab.ca>
44643 Date: Thu Nov 15 08:27:52 2007 -0700
44645 Revert "Correct relocation fixup for mpc5xx"
44647 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
44648 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44650 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
44651 Author: Grant Likely <grant.likely@secretlab.ca>
44652 Date: Thu Nov 15 08:24:32 2007 -0700
44654 Revert "Correct fixup relocation for MPC5xxx"
44656 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
44657 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44659 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
44660 Author: Grant Likely <grant.likely@secretlab.ca>
44661 Date: Thu Nov 15 08:21:04 2007 -0700
44663 Revert "Correct fixup relocation for mpc8220"
44665 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
44666 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44668 commit 70922342369e5e39b286fe21e768a239ca07a514
44669 Author: Grant Likely <grant.likely@secretlab.ca>
44670 Date: Thu Nov 15 08:20:57 2007 -0700
44672 Revert "Correct fixup relocation for mpc824x"
44674 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
44675 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44677 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
44678 Author: Grant Likely <grant.likely@secretlab.ca>
44679 Date: Thu Nov 15 08:20:50 2007 -0700
44681 Revert "Correct fixup relocation for mpc8260"
44683 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
44684 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44686 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
44687 Author: Grant Likely <grant.likely@secretlab.ca>
44688 Date: Thu Nov 15 08:20:43 2007 -0700
44690 Revert "Correct fixup relocation for mpc83xx"
44692 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
44693 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44695 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
44696 Author: Grant Likely <grant.likely@secretlab.ca>
44697 Date: Thu Nov 15 08:20:25 2007 -0700
44699 Revert "[MPC512x] Correct fixup relocation"
44701 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
44702 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
44704 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
44705 Author: Stefan Roese <sr@denx.de>
44706 Date: Thu Nov 15 14:25:09 2007 +0100
44708 ppc4xx: Small AMCC Kilauea cleanup
44710 Remove not needed pci_target_init() function.
44712 Signed-off-by: Stefan Roese <sr@denx.de>
44714 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
44715 Author: Stefan Roese <sr@denx.de>
44716 Date: Thu Nov 15 14:23:55 2007 +0100
44718 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
44720 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
44721 - Cleanup of the 4xx GPIO functions
44722 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
44724 Signed-off-by: Stefan Roese <sr@denx.de>
44726 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
44727 Author: Stefan Roese <sr@denx.de>
44728 Date: Thu Nov 15 14:20:08 2007 +0100
44730 ppc4xx: AMCC Taihu board config file cleanup
44732 This patch makes the AMCC Taihu a little more compatible to the other
44735 Signed-off-by: Stefan Roese <sr@denx.de>
44737 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
44738 Author: Marian Balakowicz <m8@semihalf.com>
44739 Date: Thu Nov 15 13:37:28 2007 +0100
44741 [INKA4x0] NG hardware: flash support
44743 Disabled and remove inka4x0 custom flash driver, use CFI flash
44746 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
44748 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
44749 Author: Marian Balakowicz <m8@semihalf.com>
44750 Date: Thu Nov 15 13:29:55 2007 +0100
44752 [INKA4x0] NG hardware: SDRAM support
44754 Add support for three new DDR chips that may be present on a NG
44755 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
44757 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
44759 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
44761 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
44762 Author: Marian Balakowicz <m8@semihalf.com>
44763 Date: Thu Nov 15 13:24:43 2007 +0100
44765 [INKA4x0] NG hardware: platform code update
44767 - Cleanup compile warnings.
44768 - Add missing '\0' in default environment.
44769 - Increase CFG_MONITOR_LEN to 256 KiB.
44770 - Add required CFG_USE_PPCENV.
44772 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
44774 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
44775 Author: Peter Pearse <peter.pearse@arm.com>
44776 Date: Thu Nov 15 08:58:00 2007 +0000
44778 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
44779 Remove warnings re onenand_read() & write()
44781 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
44782 Author: Peter Pearse <peter.pearse@arm.com>
44783 Date: Thu Nov 15 08:45:13 2007 +0000
44787 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
44788 Author: Roy Zang <tie-fei.zang@freescale.com>
44789 Date: Thu Sep 13 18:52:28 2007 +0800
44791 Enable ULi1575 Ethernet support in 8610HPCD config
44793 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
44794 Acked-by: Jon Loeliger <jdl@freescale.com>
44796 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
44797 Author: Stefan Roese <sr@denx.de>
44798 Date: Tue Nov 13 08:18:20 2007 +0100
44800 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
44802 Signed-off-by: Stefan Roese <sr@denx.de>
44804 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
44805 Author: Stefan Roese <sr@denx.de>
44806 Date: Tue Nov 13 08:06:11 2007 +0100
44808 ppc4xx: Fix 405EX PCIe UTLSET register setup
44810 Signed-off-by: Stefan Roese <sr@denx.de>
44812 commit 1ce55151c85d068f70317a8d65c61058b891afb4
44813 Author: Heiko Schocher <hs@denx.de>
44814 Date: Tue Nov 13 07:50:29 2007 +0100
44816 [UC101] SRAM now with 2 MB working.
44818 Signed-off-by: Heiko Schocher <hs@denx.de>
44820 commit 2d14684341109a69616e4d6016cd61402d55086f
44821 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44822 Date: Fri Nov 9 15:37:53 2007 +0100
44824 ppc4xx: Use generic usb-ohci driver for sequoia board
44826 This patch makes the sequoia board use the generic usb-ohci driver
44827 instead of cpu/ppc4xx/usb_ohci.c.
44829 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44830 Signed-off-by: Stefan Roese <sr@denx.de>
44832 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
44833 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44834 Date: Fri Nov 9 15:37:23 2007 +0100
44836 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
44838 This patch disables the 44x d-cache on 'usb start' and
44839 reenables it on 'usb stop'. This should be seen as a
44840 temporary fix until the generic usb-ohci driver can
44841 life with d-cache enabled.
44843 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44844 Signed-off-by: Stefan Roese <sr@denx.de>
44846 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
44847 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44848 Date: Fri Nov 9 15:36:44 2007 +0100
44850 ppc4xx: Remove redundant code from 4xx network driver
44852 This patch removes some redundant code and decrements the end
44853 address of cache flush and invalidate by 1.
44855 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
44856 Signed-off-by: Stefan Roese <sr@denx.de>
44858 commit 5ca9881aad8c413ac2a82868a5e3719178254502
44859 Author: Peter Pearse <peter.pearse@arm.com>
44860 Date: Fri Nov 9 15:24:26 2007 +0000
44862 Add apollon board support
44863 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
44865 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
44866 Author: Stefan Roese <sr@denx.de>
44867 Date: Fri Nov 9 12:19:58 2007 +0100
44869 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
44871 Signed-off-by: Stefan Roese <sr@denx.de>
44873 commit c7f69c340277935a6c19a956421852da944a365f
44874 Author: Stefan Roese <sr@denx.de>
44875 Date: Fri Nov 9 12:18:54 2007 +0100
44877 ppc4xx: Make output a little shorter on I2C bootrom detection
44879 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
44880 already print a line with the information which I2C bootrom is
44881 used for bootstrap configuration. So we don't need this extra line
44882 with "I2C boot EEPROM en-/dis-abled".
44884 This patch also has a little code cleanup integrated.
44886 Signed-off-by: Stefan Roese <sr@denx.de>
44888 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
44889 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44890 Date: Thu Nov 8 12:50:18 2007 -0600
44892 ColdFire: MCF5329 - Remove reset registers from CCM
44894 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44896 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
44897 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44898 Date: Thu Nov 8 12:31:11 2007 -0600
44900 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
44902 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44904 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
44905 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44906 Date: Thu Nov 8 12:19:01 2007 -0600
44908 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
44910 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44912 commit 225a24b5e062ad94627424508ae814f51dbe1a34
44913 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44914 Date: Wed Nov 7 18:00:54 2007 -0600
44916 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
44918 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44920 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
44921 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44922 Date: Wed Nov 7 17:56:15 2007 -0600
44924 ColdFire: MCF532x - Update do_reset() using core reset
44926 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44928 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
44929 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44930 Date: Wed Nov 7 17:51:00 2007 -0600
44932 ColdFire: Update cpu flag for 4.2-xx compiler
44934 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
44936 commit 070ba56115b4da63b46e974287fa4550d4023386
44937 Author: York Sun <yorksun@freescale.com>
44938 Date: Wed Oct 31 14:59:04 2007 -0500
44940 8610: Add console frame buffer support to FSL 8610 DIU driver.
44942 Add cfb console support to FSL 8610 DIU driver.
44943 Inspect board version from PIXIS to obtain correct pixel format.
44945 Use #define CONFIG_VIDEO in config file to enable fb console.
44947 To switch monitor, set monitor variable to
44948 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
44949 followed by "diufb init".
44951 Preserve logo bitmap at the top of the fb console.
44953 Signed-off-by: York Sun <yorksun@freescale.com>
44954 Signed-off-by: Jon Loeliger <jdl@freescale.com>
44956 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
44957 Author: York Sun <yorksun@freescale.com>
44958 Date: Mon Oct 29 13:58:39 2007 -0500
44960 8610: Add 8610 DIU display driver
44962 1280x1024 and 1024x768 @ 32 bpp are supported now.
44963 DVI, Single-link LVDS, Double-link LVDS are all supported.
44965 Environmental variable "monitor" is used to specify monitor port.
44967 A new command "diufb" is introduced to reinitialize monitor
44968 and display a BMP file in the memory. So far, 1-bit, 4-bit,
44969 8-bit and 24-bit BMP formats are supported.
44972 - initialize the diu driver
44973 Enable the port specified in the environmental variable "monitor"
44976 - display bmp file in memory.
44977 The bmp image should be no bigger than the resolution, 1280x1024
44978 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
44980 Note, this driver allocate memory but doesn't free it after use
44981 It is written on purpose -- to avoid a failure of reallocation
44982 due to memory fragement.
44984 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
44986 Signed-off-by: York Sun <yorksun@freescale.com>
44987 Signed-off-by: Jon loeliger <jdl@freescale.com>
44989 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
44990 Author: York Sun <yorksun@freescale.com>
44991 Date: Wed Oct 31 10:43:59 2007 -0500
44993 FSL: Add a freescale bitmap logo.
44995 This Freescale logo is a 340 x 128 x 4bpp BMP file
44996 that can be displayed by the DIU Framebuffer driver.
44998 Signed-off-by: York Sun <yorksun@freescale.com>
44999 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45001 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
45002 Author: York Sun <yorksun@freescale.com>
45003 Date: Mon Oct 29 13:57:53 2007 -0500
45005 8610: Make some extra debug environment variables conditional.
45007 One may #define ENV_DEBUG to get them back again.
45009 Signed-off-by: York Sun <yorksun@freescale.com>
45011 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
45012 Author: Jason Jin <Jason.jin@freescale.com>
45013 Date: Mon Oct 29 19:26:21 2007 +0800
45015 8610: Actually enable pixis_reset CONFIGs
45017 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45019 commit f3bceaab230b4748d0afc4109b6837308f018b40
45020 Author: Jason Jin <Jason.jin@freescale.com>
45021 Date: Fri Oct 26 18:31:59 2007 +0800
45023 Fix the BAT definition of PCI IO on 8610 board
45025 The address in the BAT register is aligned with the BAT size.
45026 The original definition actually did not define BAT for PCIE2 IO.
45027 This patch fix this.
45029 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45031 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
45032 Author: Jason Jin <Jason.jin@freescale.com>
45033 Date: Mon Oct 29 19:26:21 2007 +0800
45035 Unify pixis_reset altbank across board families
45037 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
45038 into the separate board config files.
45040 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45041 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45043 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
45044 Author: Jason Jin <Jason.jin@freescale.com>
45045 Date: Fri Oct 26 18:32:00 2007 +0800
45047 make 8610 board use pixis reset
45049 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
45051 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
45052 Author: Jon Loeliger <jdl@freescale.com>
45053 Date: Thu Nov 1 12:23:29 2007 -0500
45055 86xx: Fix broken variable reference when #def DEBUGing.
45057 Sometimes you can't reference the DDR2 controller variables.
45059 Signed-off-by: Jon Loeliger <jdl@freescale.com>
45061 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
45062 Author: Roy Zang <tie-fei.zang@freescale.com>
45063 Date: Mon Nov 5 17:39:24 2007 +0800
45065 Implement general ULi 526x Ethernet driver support in U-boot
45067 This patch implements general ULi 526x Ethernet driver.
45068 Until now, it is the only native Ethernet port on
45069 MPC8610HPCD board, but it could be used on other boards
45070 with ULi 526x Ethernet port as well.
45072 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
45073 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45074 Acked-by: Jon Loeliger <jdl@freescale.com>
45075 Signed-off-by: Ben Warren <bwarren@qstreams.com>
45077 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
45078 Author: Larry Johnson <lrj@arlinx.com>
45079 Date: Thu Nov 1 08:46:50 2007 -0500
45081 NET: Add Ethernet 1000BASE-X support for PPC4xx
45083 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
45084 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
45085 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
45086 "mii info" command is modified to distinguish between 1000BASE-T and -X.
45088 Signed-off-by: Larry Johnson <lrj@acm.org>
45089 Signed-off-by: Ben Warren <bwarren@qstreams.com>
45091 commit 298035df4948b113d29ac0e694717d34b95bc5dc
45092 Author: Larry Johnson <lrj@arlinx.com>
45093 Date: Wed Oct 31 11:21:29 2007 -0500
45095 NET: Cosmetic changes
45097 Signed-off-by: Larry Johnson <lrj@acm.org>
45098 Signed-off-by: Ben Warren <bwarren@qstreams.com>
45100 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
45101 Author: Stefan Roese <sr@denx.de>
45102 Date: Mon Nov 5 07:43:05 2007 +0100
45104 ppc4xx: Make output a little shorter on PCIe detection
45106 Now not max 3 lines but 2 lines are printed per PCIe port.
45108 Signed-off-by: Stefan Roese <sr@denx.de>
45110 commit 992742a5b09d9040adbd156fb90756af66ade310
45111 Author: Wolfgang Denk <wd@denx.de>
45112 Date: Sat Nov 3 23:09:27 2007 +0100
45114 Cleanup coding style; update CHANGELOG
45116 Signed-off-by: Wolfgang Denk <wd@denx.de>
45118 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
45119 Author: Bruce Adler <bruce.adler@ccpu.com>
45120 Date: Fri Nov 2 13:15:42 2007 -0700
45122 fix wording in README
45124 Changed the wording to properly describe the shadowing
45125 of the environment from ROM to RAM
45127 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
45129 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
45130 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45131 Date: Wed Oct 31 02:18:15 2007 +0900
45133 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
45135 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
45137 commit ec22755799466c8a103664bb3a5e647bf9c238f4
45138 Author: Vlad Lungu <vlad@comsys.ro>
45139 Date: Thu Oct 25 16:08:14 2007 +0300
45141 Trimmed some variables in ne2000.c
45143 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
45145 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
45146 Author: Zhang Wei <wei.zhang@freescale.com>
45147 Date: Thu Oct 25 17:51:27 2007 +0800
45149 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
45151 The scan code of the key 'z' is 0x1d, which should be handled.
45153 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
45156 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45158 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
45159 Author: Zhang Wei <wei.zhang@freescale.com>
45160 Date: Thu Oct 25 17:30:04 2007 +0800
45162 Fix USB support issue for MPC8641HPCN board.
45164 The configuration file has already enabled USB, but it
45165 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
45166 on MPC8641HPCN can not work because of the wrong USB
45169 And add the USB command to U-Boot commands list.
45171 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45173 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
45174 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45175 Date: Wed Oct 24 18:16:01 2007 +0200
45177 Use config_cmd_default.h instead of config_cmd_all.h
45179 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
45181 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
45182 Author: Marian Balakowicz <m8@semihalf.com>
45183 Date: Wed Oct 24 01:37:36 2007 +0200
45185 TQM5200: Call usb_cpu_init() during board init
45187 usb_cpu_init() configures GPS USB pins, clocks, etc. and
45188 is required for proper operation of kernel USB subsystem.
45189 This setup was previously done in the kernel by the fixup
45190 code which is being removed, thus low level init must be
45191 done by U-boot now.
45193 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
45195 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
45196 Author: Guennadi Liakhovetski <lg@denx.de>
45197 Date: Tue Oct 23 16:25:50 2007 +0200
45201 An obvious typo. Originally fixed in linkstation u-boot port.
45203 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
45205 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
45206 Author: Guennadi Liakhovetski <lg@denx.de>
45207 Date: Tue Oct 23 14:35:05 2007 +0200
45209 Fix a typo in cpu/mpc824x/interrupts.c
45211 Since December 2003 the timer_interrupt_cpu() function in
45212 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
45213 parameter. Remove it.
45215 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
45217 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
45218 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
45219 Date: Wed Oct 17 11:13:51 2007 +0200
45221 add ft_cpu_setup(..) on mpc8260
45223 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
45224 based on code from mpc5xxx
45226 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
45229 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
45230 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
45231 Date: Wed Oct 17 11:18:42 2007 +0200
45233 changes for IDS8247 board support
45235 To get the IDS8247 board working following are done:
45236 - FCC2 is deactivated
45237 - FCC1 is activated
45239 - CFI driver is activated
45240 - Adapted for use with LIBFDT
45242 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
45245 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
45246 Author: Stefan Roese <sr@denx.de>
45247 Date: Sat Nov 3 12:08:28 2007 +0100
45249 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
45251 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
45252 Again, only one image supports both targets.
45254 Signed-off-by: Stefan Roese <sr@denx.de>
45256 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
45257 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
45258 Date: Wed Oct 24 15:48:37 2007 +0200
45260 ATSTK1002: Remove default ethernet addresses
45262 Wolfgang is right: It's not a good idea to set up default initial
45263 ethernet addresses for a board, even though they belong to the local
45266 This will change the failure mode from "IT manager screams at you for
45267 using duplicate ethernet addresses" to a nice error message explaining
45268 that the ethernet address hasn't been set properly.
45270 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
45272 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
45273 Author: Justin Flammia <jflammia@savantav.com>
45274 Date: Mon Oct 29 17:40:35 2007 -0400
45278 This is a multi-part message in MIME format.
45280 commit e6e505eae94ed721e123e177489291fc4544b7b8
45281 Author: Justin Flammia <jflammia@savantav.com>
45282 Date: Mon Oct 29 17:19:03 2007 -0400
45284 Found a bug in the way the DHCP Request packet is built, where the IP address
45285 that is offered by the server is bound to prematurely. This patch is a fix of
45286 that bug where the IP address offered by the DHCP server is not used until
45287 after the DHCP ACK from the server is received.
45289 Signed-off-by: Justin Flammia <jflammia@savantav.com>
45290 Signed-off-by: Ben Warren <bwarren@qstreams.com>
45292 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
45293 Author: Stefan Roese <sr@denx.de>
45294 Date: Wed Oct 31 20:58:34 2007 +0100
45296 ppc4xx: Fix acadia_nand build problem
45298 Since the cache handling functions were moved from start.S into cache.S
45299 the acadia NAND booting Makfile needs to be adapted accordingly.
45301 Signed-off-by: Stefan Roese <sr@denx.de>
45303 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
45304 Author: Stefan Roese <sr@denx.de>
45305 Date: Wed Oct 31 20:57:11 2007 +0100
45307 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
45309 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
45310 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
45311 boards by defining CONFIG_4xx_DCACHE in the board config file. This
45312 option will disappear, when more boards use is successfully and no
45313 more known problems exist.
45315 This is tested successfully on Sequoia and Katmai. The only problem that
45316 needs to be fixed is, that USB is not working on Sequoia right now, since
45317 it will need some cache handling code too, similar to the 4xx EMAC driver.
45319 Signed-off-by: Stefan Roese <sr@denx.de>
45321 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
45322 Author: Stefan Roese <sr@denx.de>
45323 Date: Wed Oct 31 20:51:10 2007 +0100
45325 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
45327 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
45328 disable the cache for the CPU POST tests, since these tests consist
45329 of self modifying code. This is done via the new change_tlb() function.
45331 Signed-off-by: Stefan Roese <sr@denx.de>
45333 commit f71b2888b4b3c870909a0341427b2a914246f81f
45334 Author: Stefan Roese <sr@denx.de>
45335 Date: Wed Oct 31 20:47:26 2007 +0100
45337 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
45339 This patch enables the 4xx EMAC POST driver to work too, when dcache is
45342 Signed-off-by: Stefan Roese <sr@denx.de>
45344 commit a2685904061b35a17583d65fe47cdc2686a69eaa
45345 Author: Stefan Roese <sr@denx.de>
45346 Date: Wed Oct 31 20:45:53 2007 +0100
45348 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
45350 Signed-off-by: Stefan Roese <sr@denx.de>
45352 commit ff768cb168d8157c24a25016dbfbeb465e47f420
45353 Author: Stefan Roese <sr@denx.de>
45354 Date: Wed Oct 31 18:01:24 2007 +0100
45356 ppc4xx: Change 4xx ethernet driver to handle cached memory too
45358 This patch enables the 4xx EMAC driver to work too, when dcache is
45361 Signed-off-by: Stefan Roese <sr@denx.de>
45363 commit 483e09a223c666269ef81d3573a6591b1046b0ef
45364 Author: Stefan Roese <sr@denx.de>
45365 Date: Wed Oct 31 17:59:22 2007 +0100
45367 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
45369 This function is used to either turn cache on or off in a specific
45372 Signed-off-by: Stefan Roese <sr@denx.de>
45374 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
45375 Author: Stefan Roese <sr@denx.de>
45376 Date: Wed Oct 31 17:57:52 2007 +0100
45378 ppc4xx: Remove cache definition from 4xx board config files
45380 All 4xx board config files don't need the cache definitions anymore.
45381 These are now defined in common headers.
45383 Signed-off-by: Stefan Roese <sr@denx.de>
45385 commit 9b94ac61d2176185c30adf0793e079ec30e68687
45386 Author: Stefan Roese <sr@denx.de>
45387 Date: Wed Oct 31 17:55:58 2007 +0100
45389 ppc4xx: Rework 4xx cache support
45391 New cache handling functions added and all existing functions
45392 moved from start.S into seperate cache.S.
45394 Signed-off-by: Stefan Roese <sr@denx.de>
45396 commit 06713773da4ac3d390c63d82641eb553224b27c2
45397 Author: Stefan Roese <sr@denx.de>
45398 Date: Tue Oct 23 18:03:12 2007 +0200
45400 ppc4xx: Remove compiler warning from previous commit
45402 Signed-off-by: Stefan Roese <sr@denx.de>
45404 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
45405 Author: Stefan Roese <sr@denx.de>
45406 Date: Tue Oct 23 14:40:30 2007 +0200
45408 ppc4xx: Remove temporary TLB entry in POST cache test
45410 Signed-off-by: Stefan Roese <sr@denx.de>
45412 commit 1338e6a81834099ba19733b69aafd8ef5f098094
45413 Author: Stefan Roese <sr@denx.de>
45414 Date: Tue Oct 23 14:05:08 2007 +0200
45416 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
45418 I lately noticed, that newer 4xx board with GBit support sometimes don't
45419 finish link autonegotiation in 4 seconds. Changing this timeout to 5
45420 seconds seems fine here.
45422 Signed-off-by: Stefan Roese <sr@denx.de>
45424 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
45425 Author: Stefan Roese <sr@denx.de>
45426 Date: Tue Oct 23 14:03:17 2007 +0200
45428 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
45430 This patch changes all in32/out32 calls to use the recommended in_be32/
45431 out_be32 macros instead.
45433 Signed-off-by: Stefan Roese <sr@denx.de>
45435 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
45436 Author: Stefan Roese <sr@denx.de>
45437 Date: Thu Oct 25 12:24:59 2007 +0200
45439 ppc4xx: Fix POST ethernet test for Haleakala
45441 The POST ethernet test needed to be changed to dynamically determine
45442 the count of ethernet devices. This code is cloned from the 4xx
45445 Signed-off-by: Stefan Roese <sr@denx.de>
45447 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
45448 Author: Stefan Roese <sr@denx.de>
45449 Date: Tue Oct 23 11:31:05 2007 +0200
45451 ppc4xx: Correct UART input clock calculation and passing to fdt
45453 We now use a value in the gd (global data) structure for the UART input
45454 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
45457 Signed-off-by: Stefan Roese <sr@denx.de>
45459 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
45460 Author: Stefan Roese <sr@denx.de>
45461 Date: Tue Oct 23 10:10:08 2007 +0200
45463 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
45465 The Haleakala is nearly identical with the Kilauea eval board. The only
45466 difference is that the 405EXr only supports one EMAC and one PCIe
45467 interface. This patch adds support for the Haleakala board by using
45468 the identical image for Kilauea and Haleakala. The distinction is done
45469 by comparing the PVR.
45471 Signed-off-by: Stefan Roese <sr@denx.de>
45473 commit 9f798766aa85e62eb8fa8c721e148df609b78137
45474 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
45475 Date: Tue Oct 23 08:29:10 2007 +0200
45477 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
45479 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
45482 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
45483 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
45484 modules are still plugged in. So it is recommended to remove the DIMM
45485 modules while using the NAND booting code with the fixed SDRAM setup!
45487 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
45488 Signed-off-by: Stefan Roese <sr@denx.de>
45490 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
45491 Author: Stefan Roese <sr@denx.de>
45492 Date: Mon Oct 22 16:24:44 2007 +0200
45494 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
45496 Signed-off-by: Stefan Roese <sr@denx.de>
45498 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
45499 Author: Stefan Roese <sr@denx.de>
45500 Date: Mon Oct 22 16:22:40 2007 +0200
45502 ppc4xx: Rework of 4xx serial driver (4)
45506 - Use in_8/out_8 macros instead of in8/out8
45507 - No need for UART_BASE marco anymore, now really handled via function
45509 - serial_init_common() introduced
45510 - Further coding style cleanup
45512 Signed-off-by: Stefan Roese <sr@denx.de>
45514 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
45515 Author: Stefan Roese <sr@denx.de>
45516 Date: Mon Oct 22 15:45:49 2007 +0200
45518 ppc4xx: Rework of 4xx serial driver (3)
45520 Change all linker scripts to reference the changed driver name iop480_uart.o.
45522 Signed-off-by: Stefan Roese <sr@denx.de>
45524 commit 882ae41274921f9016131806bdeb27e19606f47a
45525 Author: Stefan Roese <sr@denx.de>
45526 Date: Mon Oct 22 15:44:39 2007 +0200
45528 ppc4xx: Rework of 4xx serial driver (2)
45530 Change all linker scripts to reference the changed driver name 4xx_uart.o.
45532 Note: In most cased all these explicit referencing of these object files
45533 in the linker scripts is not neccessary. Only for manually embedded
45534 environment into the U-Boot image, which is not done is most cases.
45536 Signed-off-by: Stefan Roese <sr@denx.de>
45538 commit ad31e40bed042cb670d0036fea96435007afb838
45539 Author: Stefan Roese <sr@denx.de>
45540 Date: Mon Oct 22 15:09:59 2007 +0200
45542 ppc4xx: Rework of 4xx serial driver (1)
45544 This patch starts the rework of the PPC4xx serial driver. First we split
45545 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
45546 handling code and the other one iop480_uart.c with the UART code for the
45547 PLX-Tech IOP480 PPC (PPC403 based).
45549 Signed-off-by: Stefan Roese <sr@denx.de>
45551 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
45552 Author: Stefan Roese <sr@denx.de>
45553 Date: Mon Oct 22 10:30:38 2007 +0200
45555 ppc4xx: Correct UART input clock calculation and passing to fdt
45557 Signed-off-by: Stefan Roese <sr@denx.de>
45559 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
45560 Author: Stefan Roese <sr@denx.de>
45561 Date: Mon Oct 22 07:34:34 2007 +0200
45563 ppc4xx: Add initial AMCC Makalu 405EX support
45565 Signed-off-by: Stefan Roese <sr@denx.de>
45567 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
45568 Author: Stefan Roese <sr@denx.de>
45569 Date: Mon Oct 22 07:33:52 2007 +0200
45571 ppc4xx: Add freqUART to CPU speed detection
45573 This value is needed later for the device tree configuration of
45576 Signed-off-by: Stefan Roese <sr@denx.de>
45578 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
45579 Author: Stefan Roese <sr@denx.de>
45580 Date: Sun Oct 21 14:26:29 2007 +0200
45582 ppc: Small Kilauea cleanup of config file
45584 Signed-off-by: Stefan Roese <sr@denx.de>
45586 commit 758c037aeead34b49631b8da3a90b1bba14c0410
45587 Author: Stefan Roese <sr@denx.de>
45588 Date: Sun Oct 21 08:16:12 2007 +0200
45590 rtc: Add Xicor/Intersil X1205 RTC support
45592 This patch adds support for the Xicor/Intersil X1205 RTC used on the
45593 AMCC Makalu eval board. This driver is basically cloned from the Linux
45594 driver version (2.6.23).
45596 This patch also introduces the Linux bcd.h header for the BCD2BIN/
45597 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
45598 should be converted to also use this header instead of implementing
45599 their own local copy of these functions/macros.
45601 Signed-off-by: Stefan Roese <sr@denx.de>
45603 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
45604 Author: Stefan Roese <sr@denx.de>
45605 Date: Sun Oct 21 08:12:41 2007 +0200
45607 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
45609 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
45610 PPC440_SYS_INFO structure into the common ppc4xx.h header.
45612 Lot's of other macros are good candidates to be consolidated this way
45615 Signed-off-by: Stefan Roese <sr@denx.de>
45617 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
45618 Author: Stefan Roese <sr@denx.de>
45619 Date: Sun Oct 21 08:05:18 2007 +0200
45621 ppc4xx: Fix size setup in Kilauea DDR2 init routine
45623 The size was initilized wrong. Instead of 256MB, the DDR2 controller
45624 was setup to 512MB. Now the correct values is used.
45626 This patch also does a little cleanup and adds a comment here.
45628 Signed-off-by: Stefan Roese <sr@denx.de>
45630 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
45631 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
45632 Date: Thu Oct 18 17:29:04 2007 +0200
45634 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
45636 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
45637 number is used to access system registers.
45639 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
45640 Signed-off-by: Stefan Roese <sr@denx.de>
45642 commit c36c68160333ac5fe41ec3db12a728b7075b3912
45643 Author: Stefan Roese <sr@denx.de>
45644 Date: Thu Oct 18 07:42:27 2007 +0200
45646 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
45648 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
45649 is the internal SRAM. Since I now ported and tested this endpoint mode
45650 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
45653 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
45656 Signed-off-by: Stefan Roese <sr@denx.de>
45658 commit 5cb4af4791f61843432155142b6cfac901f66c10
45659 Author: Stefan Roese <sr@denx.de>
45660 Date: Thu Oct 18 07:39:38 2007 +0200
45662 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
45664 This patch adds endpoint support for the AMCC Kilauea eval board. It can
45665 be tested by connecting a reworked PCIe cable (only 1x lane singles
45666 connected) to another root-complex.
45668 In this test setup, a 64MB inbound window is configured at BAR0 which maps
45669 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
45670 access the first 64MB of the SDRAM on the PPC side.
45672 Signed-off-by: Stefan Roese <sr@denx.de>
45674 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
45675 Author: Stefan Roese <sr@denx.de>
45676 Date: Sat Oct 13 16:43:23 2007 +0200
45678 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
45680 This patch adds support for dynamic configuration of PCIe ports for the
45681 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
45682 boards Yucca & Katmai and the 405EX board Kilauea.
45684 This dynamic configuration is done via the "pcie_mode" environement
45685 variable. This variable can be set to "EP" or "RP" for endpoint or
45686 rootpoint mode. Multiple values can be joined via the ":" delimiter.
45691 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
45694 Per default Yucca will be configured as:
45697 Per default Katmai will be configured as:
45698 pcie_mode=RP:RP:REP
45700 Per default Kilauea will be configured as:
45703 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
45704 Signed-off-by: Stefan Roese <sr@denx.de>
45706 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
45707 Author: Stefan Roese <sr@denx.de>
45708 Date: Thu Oct 11 11:15:59 2007 +0200
45710 ppc4xx: Enable device tree support (fdt) on Kilauea per default
45712 This patch enables the fdt support on the AMCC Kilauea eval board.
45713 Additionally now EBC ranges fdt fixup is included to support NOR
45714 FLASH mapping via the Linux physmap_of driver.
45716 This Kilauea port now support booting arch/ppc and arch/powerpc
45717 Linux kernels. The default environment "net_nfs" is for arch/ppc
45718 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
45719 support will be removed.
45721 Signed-off-by: Stefan Roese <sr@denx.de>
45723 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
45724 Author: Stefan Roese <sr@denx.de>
45725 Date: Thu Oct 11 11:11:45 2007 +0200
45727 ppc4xx: Add additional debug info to 4xx fdt support
45729 Signed-off-by: Stefan Roese <sr@denx.de>
45731 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
45732 Author: Stefan Roese <sr@denx.de>
45733 Date: Fri Oct 5 21:28:58 2007 +0200
45735 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
45737 Signed-off-by: Stefan Roese <sr@denx.de>
45739 commit 1941cce71b1ae975602854045061e82f94ecd012
45740 Author: Stefan Roese <sr@denx.de>
45741 Date: Fri Oct 5 17:35:10 2007 +0200
45743 ppc4xx: Fix small merge problem in 4xx_enet.c
45745 Signed-off-by: Stefan Roese <sr@denx.de>
45747 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
45748 Author: Stefan Roese <sr@denx.de>
45749 Date: Fri Oct 5 17:11:30 2007 +0200
45751 ppc4xx: Add initial AMCC Kilauea 405EX support
45753 Signed-off-by: Stefan Roese <sr@denx.de>
45755 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
45756 Author: Stefan Roese <sr@denx.de>
45757 Date: Fri Oct 5 17:10:59 2007 +0200
45759 ppc4xx: Add PPC405EX support
45761 Signed-off-by: Stefan Roese <sr@denx.de>
45763 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
45764 Author: Stefan Roese <sr@denx.de>
45765 Date: Fri Oct 5 17:09:36 2007 +0200
45767 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
45769 Signed-off-by: Stefan Roese <sr@denx.de>
45771 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
45772 Author: Stefan Roese <sr@denx.de>
45773 Date: Fri Oct 5 17:07:50 2007 +0200
45775 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
45777 Signed-off-by: Stefan Roese <sr@denx.de>
45779 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
45780 Author: Stefan Roese <sr@denx.de>
45781 Date: Fri Oct 5 17:04:57 2007 +0200
45783 POST: Add 405EX support to 4xx UART POST test
45785 Signed-off-by: Stefan Roese <sr@denx.de>
45787 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
45788 Author: Stefan Roese <sr@denx.de>
45789 Date: Fri Oct 5 15:10:02 2007 +0200
45791 DTT: Prepare DS1775 driver for use of different I2C addresses
45793 Signed-off-by: Stefan Roese <sr@denx.de>
45795 commit 19e93b1e16d267220440d827b920fbad8abfa70f
45796 Author: Stefan Roese <sr@denx.de>
45797 Date: Fri Oct 5 14:23:43 2007 +0200
45799 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
45801 Signed-off-by: Stefan Roese <sr@denx.de>
45803 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
45804 Author: Stefan Roese <sr@denx.de>
45805 Date: Fri Oct 5 09:22:33 2007 +0200
45807 ppc4xx: 4xx_pcie: Disable debug output as default
45809 Signed-off-by: Stefan Roese <sr@denx.de>
45811 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
45812 Author: Stefan Roese <sr@denx.de>
45813 Date: Fri Oct 5 09:18:23 2007 +0200
45815 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
45817 Signed-off-by: Stefan Roese <sr@denx.de>
45819 commit 4dbee8a90df613eb517aadbecebd70f168913d30
45820 Author: Stefan Roese <sr@denx.de>
45821 Date: Fri Oct 5 07:57:20 2007 +0200
45823 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
45825 128MB seems to be the smallest possible value for the memory size
45826 for on PCIe port. With this change now the BAR's of the PCIe cards
45827 are accessible under U-Boot.
45829 One big note: This only works for PCIe port 0 & 1. For port 2 this
45830 currently doesn't work, since the base address is now 0xc0000000
45831 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
45832 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
45833 to change the base addresses completely and this change would have
45834 too much impact right now.
45836 This patch adds debug output to the 4xx pcie driver too.
45838 Signed-off-by: Stefan Roese <sr@denx.de>
45840 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
45841 Author: Stefan Roese <sr@denx.de>
45842 Date: Wed Oct 3 21:16:32 2007 +0200
45844 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
45846 Signed-off-by: Stefan Roese <sr@denx.de>
45848 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
45849 Author: Stefan Roese <sr@denx.de>
45850 Date: Wed Oct 3 15:01:02 2007 +0200
45852 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
45854 These files were introduced with the IBM 405GP but are currently used on all
45855 4xx PPC platforms. So the name doesn't match the content anymore. This patch
45856 renames the files to 4xx_pci.c/h.
45858 Signed-off-by: Stefan Roese <sr@denx.de>
45860 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
45861 Author: Stefan Roese <sr@denx.de>
45862 Date: Wed Oct 3 14:14:58 2007 +0200
45864 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
45866 Signed-off-by: Stefan Roese <sr@denx.de>
45868 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
45869 Author: Stefan Roese <sr@denx.de>
45870 Date: Wed Oct 3 10:38:09 2007 +0200
45872 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
45874 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
45875 the SDR registers of the PCIe ports. This makes the overall design
45876 clearer, since it removed a lot of switch statements which are not
45879 Also, the functions ppc4xx_init_pcie_rootport() and
45880 ppc4xx_init_pcie_entport() are merged into a single function
45881 ppc4xx_init_pcie_port(), since most of the code was duplicated.
45882 This makes maintainance and porting to other 4xx platforms
45885 Signed-off-by: Stefan Roese <sr@denx.de>
45887 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
45888 Author: Stefan Roese <sr@denx.de>
45889 Date: Wed Oct 3 07:48:09 2007 +0200
45891 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
45893 This patch is the first patch of a series to make the 440SPe PCIe code
45894 usable on different 4xx PPC platforms. In preperation for the new 405EX
45895 which is also equipped with PCIe interfaces.
45897 (2) This patch renames the functions from 440spe_ to 4xx_ with a
45898 little additional cleanup
45900 Signed-off-by: Stefan Roese <sr@denx.de>
45902 commit c7c6da23028f146d912514b95aefa3da7cf37699
45903 Author: Stefan Roese <sr@denx.de>
45904 Date: Wed Oct 3 07:34:10 2007 +0200
45906 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
45908 This patch is the first patch of a series to make the 440SPe PCIe code
45909 usable on different 4xx PPC platforms. In preperation for the new 405EX
45910 which is also equipped with PCIe interfaces.
45912 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
45914 Signed-off-by: Stefan Roese <sr@denx.de>
45916 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
45917 Author: Marian Balakowicz <m8@semihalf.com>
45918 Date: Wed Oct 24 01:37:36 2007 +0200
45920 TQM5200: Call usb_cpu_init() during board init
45922 usb_cpu_init() configures GPS USB pins, clocks, etc. and
45923 is required for proper operation of kernel USB subsystem.
45924 This setup was previously done in the kernel by the fixup
45925 code which is being removed, thus low level init must be
45926 done by U-boot now.
45928 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
45929 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
45931 commit b5af773f8d92677e06f3295b45557c9d0a487c24
45932 Author: Zhang Wei <wei.zhang@freescale.com>
45933 Date: Thu Oct 25 17:51:27 2007 +0800
45935 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
45937 The scan code of the key 'z' is 0x1d, which should be handled.
45939 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
45942 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
45943 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
45945 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
45946 Author: Rodolfo Giometti <giometti@enneenne.com>
45947 Date: Mon Oct 15 11:59:17 2007 +0200
45949 PXA USB OHCI: "usb stop" implementation.
45951 Some USB keys need to be switched off before loading the kernel
45952 otherwise they can remain in an undefined status which prevents them
45953 to be correctly recognized by the kernel.
45955 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
45956 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
45958 commit 31548249decf18a6b877a18436b6139dd483fe4a
45959 Author: Justin Flammia <jflammia@savantav.com>
45960 Date: Mon Oct 29 17:40:35 2007 -0400
45964 This is a multi-part message in MIME format.
45966 commit e6e505eae94ed721e123e177489291fc4544b7b8
45967 Author: Justin Flammia <jflammia@savantav.com>
45968 Date: Mon Oct 29 17:19:03 2007 -0400
45970 Found a bug in the way the DHCP Request packet is built, where the IP address
45971 that is offered by the server is bound to prematurely. This patch is a fix of
45972 that bug where the IP address offered by the DHCP server is not used until
45973 after the DHCP ACK from the server is received.
45975 Signed-off-by: Justin Flammia <jflammia@savantav.com>
45976 Signed-off-by: Ben Warren <bwarren@qstreams.com>
45978 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
45979 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45980 Date: Thu Oct 25 17:16:22 2007 -0500
45982 ColdFire 54455: Fix correct boot location for atmel and intel
45984 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45986 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
45987 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45988 Date: Thu Oct 25 17:14:00 2007 -0500
45990 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
45992 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45994 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
45995 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
45996 Date: Thu Oct 25 17:12:36 2007 -0500
45998 ColdFire 5329: Assign correct SDRAM size and fix cache
46000 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46002 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
46003 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46004 Date: Thu Oct 25 17:10:23 2007 -0500
46006 ColdFire 5253: Assign correct SDRAM size
46008 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46010 commit 2acefa72ee0026f862ab65597ca687428f63a973
46011 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46012 Date: Thu Oct 25 17:09:17 2007 -0500
46014 ColdFire 5282: Fix external flash boot and return dramsize
46016 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
46018 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
46019 Author: Bartlomiej Sieka <tur@semihalf.com>
46020 Date: Thu Oct 25 17:20:01 2007 +0200
46022 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
46024 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
46026 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
46027 Author: Martin Krause <martin.krause@tqs.de>
46028 Date: Wed Oct 24 08:42:25 2007 +0200
46030 TQM5200: fix spurious characters on second serial interface
46032 With this patch PSC3 is configured as UART. This is done, because if
46033 the pins of PSC3 are not configured at all (-> all pins are GPI),
46034 due to crosstalk, spurious characters may be send over the RX232_2_TXD
46037 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46038 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
46040 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
46041 Author: Martin Krause <martin.krause@tqs.de>
46042 Date: Wed Oct 24 08:41:27 2007 +0200
46044 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
46046 Some commands for the STK52xx base board try to access the SM501 grafic
46047 controller. But the TQM5200S has no grafic controller (only the TQM5200
46048 and the TQM5200B have). This patch deactivates the commands accessing
46049 the SM501 for the TQM5200S.
46051 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46052 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
46054 commit b31f64343ead9482cd439b1adbe4c34026a641b1
46055 Author: Martin Krause <martin.krause@tqs.de>
46056 Date: Mon Oct 22 16:45:53 2007 +0200
46058 TQM5200: fix spurious characters on second serial interface
46060 With this patch PSC3 is configured as UART. This is done, because if
46061 the pins of PSC3 are not configured at all (-> all pins are GPI),
46062 due to crosstalk, spurious characters may be send over the RX232_2_TXD
46065 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46067 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
46068 Author: Martin Krause <martin.krause@tqs.de>
46069 Date: Mon Oct 22 16:40:06 2007 +0200
46071 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
46073 Some commands for the STK52xx base board try to access the SM501 grafic
46074 controller. But the TQM5200S has no grafic controller (only the TQM5200
46075 and the TQM5200B have). This patch deactivates the commands accessing
46076 the SM501 for the TQM5200S.
46078 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46080 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
46081 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46082 Date: Sun Oct 21 09:14:28 2007 +0200
46084 Mips: Fix string functions differ prototype declaration
46086 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46088 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
46089 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
46090 Date: Fri Oct 19 17:51:40 2007 -0500
46092 fsl_pci_init enable COMMAND_MEMORY if inbound window
46094 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
46095 to pciauto_setup_device has the side effect of not getting
46096 COMMAND_MEMORY set.
46098 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46100 commit e9d0d527992566ebef9826962ff1745b2f082b92
46101 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46102 Date: Fri Oct 19 10:55:24 2007 +0200
46104 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
46106 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46108 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
46109 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46110 Date: Fri Oct 19 08:10:15 2007 +0200
46112 fix warning: no return statement in function returning non-void
46114 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46116 commit e78220f6e514206757acfe247297fc9a328a881f
46117 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46118 Date: Fri Oct 19 06:33:45 2007 +0200
46120 xsengine: Fix no partition type specified, use DOS as default
46122 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46124 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
46125 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46126 Date: Fri Oct 19 00:24:59 2007 +0200
46128 lubbock: Fix no partition type specified, use DOS as default
46130 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46132 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
46133 Author: Wolfgang Denk <wd@denx.de>
46134 Date: Tue Oct 23 16:50:03 2007 +0200
46136 Coding style: keep lists sorted; update CHANGELOG
46138 Signed-off-by: Wolfgang Denk <wd@denx.de>
46140 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
46141 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46142 Date: Fri Oct 19 00:09:05 2007 +0200
46144 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
46146 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46148 commit 96455bfebc9887837095c9051d216f53c61b5f10
46149 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46150 Date: Fri Oct 19 00:07:39 2007 +0200
46152 Fix warning differ in signedness in board/innokom/innokom.c
46154 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46156 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
46157 Author: Marcel Ziswiler <marcel@ziswiler.com>
46158 Date: Fri Oct 19 00:25:33 2007 +0200
46160 fix pxa255_idp board
46162 The pxa255_idp being an old unmaintained board showed several issues:
46163 1. CONFIG_INIT_CRITICAL was still defined.
46164 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
46165 3. Symbol flash_addr was undeclared.
46166 4. The boards lowlevel_init function was still called memsetup.
46167 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
46168 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
46169 'target CPU does not support interworking' warnings on recent compilers.
46170 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
46171 indexes rather than the register definitions from the pxa-regs header
46172 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
46173 avoid any ambiguities.
46174 8. There were several redefinition warnings concerning ICMR, OSMR3,
46175 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
46176 9. The board configuration file was rather outdated.
46177 10. The part header file defined the vendor, product and revision arrays
46178 as unsigned chars instead of just chars in the block_dev_desc_t
46181 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
46183 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
46184 Author: Rune Torgersen <runet@innovsys.com>
46185 Date: Wed Oct 17 11:56:31 2007 -0500
46187 Make MPC8266ADS command selection more robust
46189 Fix MPC8266 command line definition so it won't break when new commands
46190 are added to u-boot.
46191 Signed-off-by Rune Torgersen <runet@innovsys.com>
46193 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
46194 Author: Bartlomiej Sieka <tur@semihalf.com>
46195 Date: Tue Oct 23 13:14:10 2007 +0200
46197 Motion-PRO: Update configuration to accomodate next generation board.
46199 New board has faster oscillator and a different Flash chip. This affects:
46200 - CFG_MPC5XXX_CLKIN
46202 - Flash CS configuration (timings)
46203 - Flash sector size, and thus MTD partition layout
46204 - malloc() arena size (due to bigger Flash sectors)
46205 - smaller memory test range (due to bigger malloc() arena)
46207 This patch also enables more extensive memory testing via "mtest".
46209 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
46211 commit eff501904df2bf1724a750062628ba2c51dbb1f8
46212 Author: Bartlomiej Sieka <tur@semihalf.com>
46213 Date: Tue Oct 23 11:36:07 2007 +0200
46215 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
46217 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
46218 register must be written a value of 0x00000004 as the first step of the
46219 SDRAM contorller configuration.
46221 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
46223 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
46224 Author: Peter Pearse <peter.pearse@arm.com>
46225 Date: Tue Oct 23 10:22:16 2007 +0100
46227 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
46229 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
46230 Author: Stefan Roese <sr@denx.de>
46231 Date: Tue Oct 23 10:17:42 2007 +0200
46233 ppc4xx: lwmon5: Some further GPIO config changes
46235 Signed-off-by: Stefan Roese <sr@denx.de>
46237 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
46238 Author: Vlad Lungu <vlad@comsys.ro>
46239 Date: Sun Oct 21 22:10:10 2007 +0900
46241 [MIPS] Fix UNCACHED_SDRAM
46243 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
46245 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
46246 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46248 commit 00101dd7a32d12f698150123e47e4b3420279f86
46249 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46250 Date: Sun Oct 21 21:30:42 2007 +0900
46252 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
46254 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46256 commit eb700636db017d310edaeb559b13d82588560674
46257 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46258 Date: Sun Oct 21 10:55:37 2007 +0900
46260 [MIPS] u-boot.lds: Define _gp in a standard manner
46262 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46264 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
46265 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46266 Date: Sun Oct 21 10:55:36 2007 +0900
46268 [MIPS] Fix $gp usage
46270 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
46271 As a general principle, we should use _gp for $gp.
46273 Thanks to linker script's help we fortunately have _gp which equals to
46274 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
46275 be able to access to GOT entires, global variables and procedure entry
46276 points. The right thing to do is to use _gp.
46278 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
46279 which holds the offset from _gp. When updating GOT entries, we use this
46280 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
46282 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
46283 I made some change to leave over num_got_entries.
46285 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46286 Cc: Vlad Lungu <vlad@comsys.ro>
46288 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
46289 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46290 Date: Sun Oct 21 10:55:36 2007 +0900
46292 [MIPS] u-boot.lds: Fix __got_start and __got_end
46294 Ensure that __got_start points to top of the `.got', and __got_end points
46295 to bottom as well, so that we never fail to count num_got_entries.
46297 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46299 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
46300 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46301 Date: Sun Oct 21 10:55:36 2007 +0900
46303 [MIPS] u-boot.lds: Remove duplicated .sdata section
46305 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
46307 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
46308 Author: Wolfgang Denk <wd@denx.de>
46309 Date: Sun Oct 21 01:01:17 2007 +0200
46311 Minor coding style cleanup; update CHANGELOG
46313 Signed-off-by: Wolfgang Denk <wd@denx.de>
46315 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
46316 Author: Vlad Lungu <vlad@comsys.ro>
46317 Date: Thu Oct 4 20:47:10 2007 +0300
46321 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
46322 to do anything in eth_stop() if eth_init() was not called.
46323 Simplified RX path in order to avoid timeouts on really really
46324 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
46325 clever enough to cope with 1 packet per eth_rx().
46327 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
46329 commit df90968b48fb34fa9072fab150db2ac89678f537
46330 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
46331 Date: Mon Sep 24 13:32:13 2007 -0400
46333 Setting MSR[DE] in do_reset
46336 This patch ensures the soft reset of the board for the 85xx boards
46337 by setting the MSR[DE] in the do_reset function.
46339 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
46341 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
46342 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
46343 Date: Mon Sep 24 13:36:01 2007 -0400
46348 This patch fixes the MSR overwrite in the start.S when moving out of
46351 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
46353 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
46354 Author: Dan Wilson <dwilson@fulcrummicro.com>
46355 Date: Fri Oct 19 11:33:48 2007 -0500
46357 tsec driver should clear RHALT on startup
46359 This was causing problems for some people.
46361 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
46362 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
46363 Signed-off-by: Andy Fleming <afleming@freescale.com>
46365 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
46366 Author: Kumar Gala <galak@kernel.crashing.org>
46367 Date: Thu Oct 11 00:29:18 2007 -0500
46369 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
46371 On the MPC85xx CDS we have two issues:
46373 1. The device tree fixup code did not check to see if the property we are
46374 trying to update is actually found. Its possible that it would update
46375 random memory starting at 0.
46377 2. Newer Linux kernel's have moved the location of the PCI nodes to be
46378 sibilings of the soc node and not children. The explicit PATH to the PCI
46379 node would not be found for these device trees. Add the ability to handle
46380 both paths. In the future we shouldn't handle such fixups by explicit path.
46382 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
46384 commit a3063eec775719b7e91023bbec3f64b3118791df
46385 Author: Kumar Gala <galak@kernel.crashing.org>
46386 Date: Thu Oct 11 00:18:48 2007 -0500
46388 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
46390 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
46391 console. Make it so we match that config what we tell Linux as the early
46394 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
46396 commit e1ce3cb617bb06f91f82f98915391175addf3e82
46397 Author: Kumar Gala <galak@kernel.crashing.org>
46398 Date: Tue Oct 2 11:12:27 2007 -0500
46400 Remove magic numbers from cache related operations for mpc85xx
46402 The mpc85xx start code uses some magic numbers that we actually
46403 have #defines for in <config.h> so use those instead.
46405 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
46407 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
46408 Author: Detlev Zundel <dzu@denx.de>
46409 Date: Fri Oct 19 16:47:26 2007 +0200
46413 Signed-off-by: Detlev Zundel <dzu@denx.de>
46415 commit 281df457c1aa50d2752165d0c5c3282d4027b974
46416 Author: Tony Li <tony.li@freescale.com>
46417 Date: Thu Oct 18 17:47:19 2007 +0800
46419 mpc83xx: Add configure entry for MPC83xx ATM support
46421 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
46422 Makfile and MAKEALL
46424 Signed-off-by: Tony Li <tony.li@freescale.com>
46425 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
46427 commit d2646554f529a9577515eceb0ec5eceee18244ba
46428 Author: Tony Li <tony.li@freescale.com>
46429 Date: Thu Oct 18 17:44:38 2007 +0800
46431 mpc83xx: pq-mds-pib.c typo error
46433 Correct to val8 from val.
46435 Signed-off-by: Tony Li <tony.li@freescale.com>
46436 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
46438 commit 3e11ae80fec1ee12194940955431186abf6009c2
46439 Author: Stefan Roese <sr@denx.de>
46440 Date: Wed Oct 17 15:40:19 2007 +0200
46442 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
46444 Signed-off-by: Stefan Roese <sr@denx.de>
46446 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
46447 Author: Jon Loeliger <jdl@freescale.com>
46448 Date: Tue Oct 16 15:27:43 2007 -0500
46450 Initial mpc8610hpcd Makefile files.
46452 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46453 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
46454 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
46455 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46457 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
46458 Author: Jon Loeliger <jdl@freescale.com>
46459 Date: Tue Oct 16 15:26:51 2007 -0500
46461 Initial mpc8610hpcd cpu/, README and include/ files.
46463 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46464 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
46465 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
46466 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46468 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
46469 Author: Jon Loeliger <jdl@freescale.com>
46470 Date: Tue Oct 16 13:54:01 2007 -0500
46472 Initial mpc8610hpcd board files.
46474 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46475 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
46476 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
46477 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46479 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
46480 Author: runet@innovsys.com <runet@innovsys.com>
46481 Date: Tue Oct 16 14:50:40 2007 -0500
46483 Make MPC8266ADS board compile again.
46485 Signed-off-by: Runet Torgersen <runet@innovsys.com>
46487 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
46488 Author: Jon Loeliger <jdl@freescale.com>
46489 Date: Mon Aug 27 12:41:03 2007 -0500
46491 86xx: Allow for fewer DDR slots per memory controller.
46493 As a direct correlation exists between DDR DIMM slots
46494 and SPD EEPROM addresses used to configure them, use
46495 the individually defined SPD_EEPROM_ADDRESS* values to
46496 determine if a DDR DIMM slot should have its SPD
46497 configuration read or not.
46499 Effectively, this now allows for 1 or 2 DIMM slots
46500 per memory controller.
46502 Signed-off-by: Jon Loeliger <jdl@freescale.com>
46504 commit 4d4a945e189a2f384c66432316da2788a0ac1607
46505 Author: Rodolfo Giometti <giometti@enneenne.com>
46506 Date: Mon Oct 15 11:59:17 2007 +0200
46508 PXA USB OHCI: "usb stop" implementation.
46510 Some USB keys need to be switched off before loading the kernel
46511 otherwise they can remain in an undefined status which prevents them
46512 to be correctly recognized by the kernel.
46514 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
46516 commit e2e93442e558cf1500e92861f99713b2f045ea22
46517 Author: Stefan Roese <sr@denx.de>
46518 Date: Mon Oct 15 11:39:00 2007 +0200
46520 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
46522 The I2C bootstrap values that can be setup via the "bootstrap" command,
46523 were setup incorrect regarding the generation of the internal sync PCI
46524 clock. The values for PLB clock == 133MHz were slighly incorrect and the
46525 values for PLB clock == 166MHz were totally incorrect. This could
46526 lead to a hangup upon booting while PCI configuration scan.
46528 This patch fixes this issue and configures valid PCI divisor values
46529 for the sync PCI clock, with respect to the provided external async
46532 Here the values of the formula in the chapter 14.2 "PCI clocking"
46533 from the 440EPx users manual:
46535 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
46537 33MHz async PCI frequency:
46539 => 32 <= 44.3 <= 65 (div = 3)
46542 => 32 <= 55.3 <= 65 (div = 3)
46544 66MHz async PCI frequency:
46546 => 65 <= 66.5 <= 132 (div = 2)
46549 => 65 <= 83 <= 132 (div = 2)
46551 Signed-off-by: Stefan Roese <sr@denx.de>
46553 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
46554 Author: Stefan Roese <sr@denx.de>
46555 Date: Mon Oct 15 11:29:33 2007 +0200
46557 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
46559 The BCSR status bit for the 66MHz PCI operation was correctly
46560 addressed (MSB/LSB problem). Now the correct currently setup
46561 PCI frequency is displayed upon bootup.
46563 This patch also fixes this problem on Rainier & Yellowstone, since these
46564 boards use the same souce code as Sequoia & Yosemite do.
46566 Signed-off-by: Stefan Roese <sr@denx.de>
46568 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
46569 Author: Martin Krause <martin.krause@tqs.de>
46570 Date: Wed Sep 26 17:55:56 2007 +0200
46572 TQM860M: adjust for doubled flash sector size.
46574 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
46575 doubled sector size.
46577 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46579 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
46580 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
46581 Date: Wed Sep 26 17:55:54 2007 +0200
46583 TQM8xx: Fix CAN timing.
46585 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46587 commit d43e489baf02afae49077791fb22332d240d8656
46588 Author: Martin Krause <martin.krause@tqs.de>
46589 Date: Thu Sep 27 14:54:36 2007 +0200
46591 TQM866M: fix SDRAM refresh
46593 At 133 MHz the current SDRAM refresh rate is too fast
46594 (measured 4 * 1.17 us).
46595 CFG_MAMR_PTA changes from 39 to 97. This result
46596 in a refresh rate of 4 * 7.8 us at the default clock
46597 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
46598 This is a compromise until a new method is found to
46599 adjust the refresh rate.
46601 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46603 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
46604 Author: Martin Krause <martin.krause@tqs.de>
46605 Date: Wed Sep 26 17:55:55 2007 +0200
46607 TQM866M: adjust for doubled flash sector size.
46609 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
46610 doubled sector size.
46612 Signed-off-by: Martin Krause <martin.krause@tqs.de>
46614 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
46615 Author: Michal Simek <monstr@monstr.eu>
46616 Date: Sun Oct 14 16:12:29 2007 +0200
46618 [FIX] XUPV2P change command handling
46619 and remove code violation
46621 commit 636400198228d96983c06657b17f760f5989958e
46622 Author: Wolfgang Denk <wd@denx.de>
46623 Date: Sun Oct 14 00:13:19 2007 +0200
46625 Prepare for 1.3.0-rc3 release
46627 Signed-off-by: Wolfgang Denk <wd@denx.de>
46629 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
46630 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46631 Date: Sat Sep 29 13:41:37 2007 +0200
46633 Fix warning differ in signedness in cpu/pxa/mmc.c
46635 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46637 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
46638 Author: Wolfgang Denk <wd@denx.de>
46639 Date: Sat Oct 13 23:51:14 2007 +0200
46641 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
46643 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46644 Signed-off-by: Wolfgang Denk <wd@denx.de>
46646 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
46647 Author: Wolfgang Denk <wd@denx.de>
46648 Date: Sat Oct 13 21:15:39 2007 +0200
46650 Coding Style cleanup.
46652 Signed-off-by: Wolfgang Denk <wd@denx.de>
46654 commit e1893815b0999410d7a327589611c7b38e95299e
46655 Author: Wolfgang Denk <wd@denx.de>
46656 Date: Fri Oct 12 15:49:39 2007 +0200
46658 GP3 SSA: enable RTC
46660 Signed-off-by: Wolfgang Denk <wd@denx.de>
46662 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
46663 Author: Grzegorz Bernacki <gjb@semihalf.com>
46664 Date: Tue Oct 9 13:58:24 2007 +0200
46666 [ads5121] EEPROM support added.
46668 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
46670 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
46671 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
46672 Date: Sat Oct 6 18:55:35 2007 +0200
46674 AVR32: Initialize bi_flash* in board_init_r
46676 The ATSTK1000-specific flash driver intializes bi_flashstart,
46677 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
46680 Initialize these in board_init_r instead so that things will still be
46681 set up correctly when we switch to the CFI driver.
46683 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
46685 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
46686 Author: Marian Balakowicz <m8@semihalf.com>
46687 Date: Fri Oct 5 10:40:54 2007 +0200
46689 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
46691 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
46693 commit 92869195ef8210758d2176230c0a36897afd50ed
46694 Author: Bartlomiej Sieka <tur@semihalf.com>
46695 Date: Fri Oct 5 09:46:06 2007 +0200
46697 CM5200: Fix missing null-termination in hostname manipulation code
46699 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
46701 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
46702 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
46703 Date: Tue Oct 2 19:09:01 2007 +0200
46705 Fix memtest breakage
46707 CFG_MEMTEST_START uses weird magic involving gd, which fails to
46708 compile. Use hardcoded values instead (we actually know how much RAM
46711 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
46713 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
46714 Author: Stefan Roese <sr@denx.de>
46715 Date: Tue Oct 2 11:44:46 2007 +0200
46717 ppc4xx: Coding style cleanup
46719 Signed-off-by: Stefan Roese <sr@denx.de>
46721 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
46722 Author: Stefan Roese <sr@denx.de>
46723 Date: Tue Oct 2 11:44:19 2007 +0200
46725 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
46727 Signed-off-by: Stefan Roese <sr@denx.de>
46729 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
46730 Author: Grzegorz Bernacki <gjb@semihalf.com>
46731 Date: Mon Oct 1 09:51:50 2007 +0200
46733 Program EPLD to force full duplex mode for PHY.
46735 EPLD forces modes of PHY operation. By default full duplex is turned off.
46736 This fix turns it on.
46738 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
46740 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
46741 Author: Timo Ketola <timo.ketola@exertus.fi>
46742 Date: Mon Sep 24 14:50:32 2007 +0300
46744 Bugfix: Use only one PTD for one endpoint
46746 Original isp116x-hcd code prepared multiple PTDs for longer than 16
46747 byte transfers for one endpoint. That is unnecessary because the
46748 ISP116x is able to split long data from one PTD into multiple
46749 transactions based on the buffer size of the endpoint. It also caused
46750 serious problems if the endpoint NAKed some of the transactions. In
46751 that case ISP116x wouldn't notice that the other PTDs were for the same
46752 endpoint and would try the other PTDs possibly out of order. That would
46753 break the whole transfer.
46755 This patch makes isp116x_submit_job to use one PTD for one transfer.
46757 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
46758 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
46760 commit 86ec86c04326c3913178a7679aa910de071da75d
46761 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46762 Date: Thu Sep 27 23:27:47 2007 +0200
46764 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
46766 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
46768 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
46769 Author: Stefan Roese <sr@denx.de>
46770 Date: Tue Sep 11 14:12:55 2007 +0200
46772 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
46774 Signed-off-by: Stefan Roese <sr@denx.de>
46776 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
46777 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
46778 Date: Wed Sep 26 16:35:54 2007 -0500
46780 85xx io out functions need sync after write.
46782 This fixes the mc146818 rtc_read/write functions for 85xx.
46784 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
46786 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
46787 Author: Grant Likely <grant.likely@secretlab.ca>
46788 Date: Tue Sep 25 15:48:05 2007 -0600
46790 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
46792 CFG_FPGA_XILINX is a bit value used to test against the value in
46793 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
46794 think that is the intention in this code.
46796 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
46798 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
46799 Author: Michal Simek <monstr@monstr.eu>
46800 Date: Mon Sep 24 00:41:30 2007 +0200
46802 [FIX] change command handling and removing code violation
46804 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
46805 Author: Michal Simek <monstr@monstr.eu>
46806 Date: Mon Sep 24 00:36:06 2007 +0200
46808 [FIX] change sets of commands
46809 because changing of command handling brings
46810 compilation problems
46812 commit cb1bc63b75a232571eb69aa2c8aa919321655845
46813 Author: Michal Simek <monstr@monstr.eu>
46814 Date: Mon Sep 24 00:30:42 2007 +0200
46816 [FIX] Email reparation & Copyright
46817 Both codes are written by myself without any
46820 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
46821 Author: Michal Simek <monstr@monstr.eu>
46822 Date: Mon Sep 24 00:25:11 2007 +0200
46824 [PATCH] Change macro name for UartLite
46825 because PowerPC 405 can use UartLite as console
46827 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
46828 Author: Michal Simek <monstr@monstr.eu>
46829 Date: Mon Sep 24 00:21:19 2007 +0200
46831 [PATCH] Add support for design without interrupt controller
46834 commit 0731933ec8ec45d02ba89b52df673d526873cdde
46835 Author: Michal Simek <monstr@monstr.eu>
46836 Date: Mon Sep 24 00:19:48 2007 +0200
46838 [FIX] resolve problem with cpu without barrel shifter
46840 commit db14d77995ce515b728b178b63f82babe60e3d56
46841 Author: Michal Simek <monstr@monstr.eu>
46842 Date: Mon Sep 24 00:18:46 2007 +0200
46844 [FIX] repair email address
46846 commit 481d4328618804add1f818a6c96296121cd0528e
46847 Author: Michal Simek <monstr@monstr.eu>
46848 Date: Mon Sep 24 00:17:42 2007 +0200
46850 [FIX] repair MFSL commands
46852 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
46853 Author: Michal Simek <monstr@monstr.eu>
46854 Date: Mon Sep 24 00:08:37 2007 +0200
46856 synchronizition with mainline
46858 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
46859 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46860 Date: Sun Sep 23 02:42:38 2007 +0900
46862 sh: Add support command of ide with sh
46864 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46866 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
46867 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46868 Date: Sun Sep 23 02:38:42 2007 +0900
46870 sh: Update Makefile
46872 Add support MS7722SE01 to Makefile.
46874 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46876 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
46877 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46878 Date: Sun Sep 23 02:31:13 2007 +0900
46880 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
46882 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46884 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
46885 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46886 Date: Sun Sep 23 02:19:24 2007 +0900
46888 sh: Update MS7750SE01 platform
46890 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46892 commit 516ad760db3553766267ada01b7d5d727faa4bbd
46893 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46894 Date: Sun Sep 23 02:17:08 2007 +0900
46896 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
46898 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46900 commit b02bad128669e567fce87d8df823b06a0144b8db
46901 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46902 Date: Sun Sep 23 02:12:30 2007 +0900
46904 sh: Update core code of SuperH.
46906 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
46908 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
46909 Author: Wolfgang Denk <wd@denx.de>
46910 Date: Thu Sep 20 00:04:14 2007 +0200
46914 Signed-off-by: Wolfgang Denk <wd@denx.de>
46916 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
46917 Author: Wolfgang Denk <wd@denx.de>
46918 Date: Tue Sep 18 21:36:35 2007 +0200
46920 Avoid compiler warning.
46922 Signed-off-by: Wolfgang Denk <wd@denx.de>
46924 commit 8a783a65851bc7421ab69f442261215e21b8891a
46925 Author: Grant Likely <grant.likely@secretlab.ca>
46926 Date: Tue Sep 18 12:24:57 2007 -0600
46928 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
46930 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
46931 nulls in a string differently. For example, the following statement:
46932 echo "this is a string\0" > afile
46933 Will produce the following with /bin/bash:
46934 "this is a string\0"
46935 But with /bin/dash, will produce:
46938 Bug fixed by moving the embedded null out of the makefile and into the
46939 config header. Also renamed the macro to avoid usage colision with the same
46940 macro used by other board ports.
46942 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
46944 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
46945 Author: Wolfgang Denk <wd@denx.de>
46946 Date: Tue Sep 18 17:40:27 2007 +0200
46948 MCC200: fix build warning
46950 The MCC200 board config file includes version.h for some customer-
46951 specific setting, which causes warnings with "make depend"; build
46952 version.h before depend.
46954 Signed-off-by: Wolfgang Denk <wd@denx.de>
46956 commit bd86220f58b99d6896198c385fda132f0c980915
46957 Author: Peter Pearse <peter.pearse@arm.com>
46958 Date: Tue Sep 18 13:07:54 2007 +0100
46960 Move coloured led API to status_led.h
46961 Improve indentation in drivers/at45.c
46963 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
46964 Author: Eirik Aanonsen <eaa@wprmedical.com>
46965 Date: Tue Sep 18 08:47:20 2007 +0200
46967 Update atstk1002 bootargs.
46969 Updates to atstk1002 U-Boot header file:
46970 - Changed bootargs:
46971 * Set the bootargs for at1002 to point to the SD-card partition instead
46972 * ... of the boot flash.
46973 * Removing the rootfstype since that argument are not needed.
46975 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
46976 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
46978 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
46979 Author: Eirik Aanonsen <eaa@wprmedical.com>
46980 Date: Wed Sep 12 13:32:37 2007 +0200
46982 Add some comments to clocks in atstk1002.h
46984 This patch applies some clarifying comments to how the different
46985 clocks are setup according to atstk1002.h Some of the previous
46986 comments where stating wrongful information.
46988 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
46990 commit 97213f32416ead885deafea86774e912ffd60ad0
46991 Author: David Saada <David.Saada@ecitele.com>
46992 Date: Mon Sep 17 17:04:47 2007 +0200
46994 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
46996 Signed-off-by: David Saada <david.saada@ecitele.com>
46998 commit 30363e98fa470fbecea5e8bc0f1443352754f303
46999 Author: Stefan Roese <sr@denx.de>
47000 Date: Mon Sep 17 08:20:47 2007 +0200
47002 Small whitespace cleanup of OneNAND patch
47004 Signed-off-by: Stefan Roese <sr@denx.de>
47006 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
47007 Author: Kyungmin Park <kmpark@infradead.org>
47008 Date: Mon Sep 10 17:15:14 2007 +0900
47010 OneNAND support (take #2)
47012 [PATCH 3/3] OneNAND support (take #2)
47014 OneNAND support at U-Boot
47016 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
47018 commit 17aa2800457df0c06b41516f46f126712c196219
47019 Author: Kyungmin Park <kmpark@infradead.org>
47020 Date: Mon Sep 10 17:14:34 2007 +0900
47022 OneNAND support (take #2)
47024 [PATCH 2/3] OneNAND support (take #2)
47026 OneNAND support at U-Boot
47028 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
47030 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
47031 Author: Kyungmin Park <kmpark@infradead.org>
47032 Date: Mon Sep 10 17:13:49 2007 +0900
47034 OneNAND support (take #2)
47036 [PATCH 1/3] OneNAND support (take #2)
47038 OneNAND support at U-Boot
47040 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
47042 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
47043 Author: Michal Simek <monstr@monstr.eu>
47044 Date: Sun Sep 16 20:51:57 2007 +0200
47046 [FIX] remove files form repository
47048 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
47049 Author: Wolfgang Denk <wd@denx.de>
47050 Date: Sun Sep 16 17:10:04 2007 +0200
47052 TQM8xx[LM]: Fix broken environment alignment.
47054 With recent toolchains, the environment sectors were no longer aligned to
47055 sector boundaries. The reason was a combination of two bugs:
47057 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
47058 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
47059 this gets defined, is not included here (and cannot be included
47060 without causing lots of problems).
47062 Added a new #define CFG_USE_PPCENV for all boards which really
47063 want to put the environment is a ".ppcenv" section.
47065 2) The linker scripts just include environment.o, silently assuming
47066 that the objects in that file are really in the order in which
47067 they are coded in the C file, i. e. "environment" first, then
47068 "redundand_environment", and "env_size" last. However, current
47069 toolchains (GCC-4.x) reorder the objects, causing the environment
47070 data not to start on a flash sector boundary:
47072 Instead of: we got:
47074 40008000 T environment 40008000 T env_size
47075 4000c000 T redundand_environment 40008004 T redundand_environment
47076 40010000 T env_size 4000c004 T environment
47078 Note: this patch fixes just the first part, and cures the alignment
47079 problem by making sure that "env_size" gets placed correctly. However,
47080 we still have a potential issue because primary and redundant
47081 environment sectors are actually swapped, i. e. we have now:
47083 40008000 T redundand_environment
47084 4000c000 T environment
47085 40010000 T env_size
47087 This shall be fixed in the next version.
47089 Signed-off-by: Wolfgang Denk <wd@denx.de>
47091 commit eb6da8050797c204c9d010548424186c7ce32fc1
47092 Author: Wolfgang Denk <wd@denx.de>
47093 Date: Sun Sep 16 02:39:35 2007 +0200
47095 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
47097 Signed-off-by: Wolfgang Denk <wd@denx.de>
47099 commit cd2d1602c54cc6957bdef3872272a4b264893960
47100 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
47101 Date: Mon Sep 10 14:54:56 2007 -0400
47105 Fixup for the break statement in wrong place.
47107 [Patch by urwithsughosh@gmail.com]
47108 Acked-by: Andy Fleming <afleming@freescale.com>
47109 Signed-off-by: Wolfgang Denk <wd@denx.de>
47111 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
47112 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47113 Date: Tue Sep 11 17:04:00 2007 +0200
47115 Fix do_div() usage in nand process output
47117 Fix usage of do_div() in nand erase|read|write process output.
47119 The last patch to nand_util.c introduced do_div() instead of libgcc's
47120 implementation. But do_div() returns the quotient in its first
47121 macro parameter and not as result.
47123 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47125 commit c750d2e6692a000a82f29de7bf24e3dc21239161
47126 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47127 Date: Wed Sep 12 12:36:53 2007 +0200
47129 NAND: Add CFG_NAND_QUIET option
47131 This config option sets the default for the progress information
47132 output behavior that can also be configured through the 'quiet'
47133 environment variable.
47135 The legacy NAND code does not print the current progress info
47136 on the console. So this option is for backward compatibility for
47137 units that are in the field and where setting the quiet variable
47138 is not an option. With CFG_NAND_QUIET set to '1' the console
47139 progress info is turned off. This can still be overwritten
47140 through the environment variable.
47142 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
47144 commit dcb88630290d2bcd803386dd4c2be73142994c4f
47145 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
47146 Date: Thu Sep 13 16:06:05 2007 -0700
47148 ColdFire: fix build error becasue of bad type of mii_init()
47150 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
47152 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
47153 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
47154 Date: Thu Sep 13 16:04:05 2007 -0700
47156 ColdFire: Fix build error caused by pixis.c
47158 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
47160 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
47162 commit e21659e30660a1377c42af135a6114efe39801d9
47163 Author: Sam Sparks <SSparks@twacs.com>
47164 Date: Fri Sep 14 11:14:42 2007 -0600
47166 Update MPC8349ITX*_config to place config.tmp in right place.
47168 MPC834ITX*_config does not store config.tmp at the correct locatation,
47169 causing MPC8349ITXGP to have the wrong TEXT_BASE.
47171 Signed-off-by: Sam Sparks <SSparks@twacs.com>
47172 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47174 commit 1218abf1b5817a39a82399b4b928b00750575bda
47175 Author: Wolfgang Denk <wd@denx.de>
47176 Date: Sat Sep 15 20:48:41 2007 +0200
47178 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
47180 Signed-off-by: Wolfgang Denk <wd@denx.de>
47182 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
47183 Author: Dirk Behme <dirk.behme@googlemail.com>
47184 Date: Sat Sep 15 11:55:42 2007 +0200
47186 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
47188 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
47191 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
47193 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
47195 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
47196 Author: Michal Simek <monstr@monstr.eu>
47197 Date: Sat Sep 15 00:03:35 2007 +0200
47199 Synchronize with U-BOOT mainline
47201 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
47202 Author: Sam Sparks <SSparks@twacs.com>
47203 Date: Fri Sep 14 11:14:42 2007 -0600
47205 Update MPC8349ITX*_config to place config.tmp in right place.
47207 MPC834ITX*_config does not store config.tmp at the correct locatation,
47208 causing MPC8349ITXGP to have the wrong TEXT_BASE.
47210 Signed-off-by: Sam Sparks <SSparks@twacs.com>
47211 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47212 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
47214 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
47215 Author: Bartlomiej Sieka <tur@semihalf.com>
47216 Date: Thu Sep 13 18:21:48 2007 +0200
47218 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
47220 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
47222 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
47223 Author: Bartlomiej Sieka <tur@semihalf.com>
47224 Date: Thu Sep 13 16:33:59 2007 +0200
47226 tqm5200: Restore customary env. variable boot commands for powerpc kernels
47228 - update default definitions of kernel_addr and fdt_addr env. variables
47229 - make arch/powerpc booting the default scenario
47230 - update MTD partition layout to match the above
47232 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
47234 commit f34024d4a328e6edd906456da98d2c537155c4f7
47235 Author: Wolfgang Denk <wd@denx.de>
47236 Date: Wed Sep 12 00:48:57 2007 +0200
47238 Fix memory corruption problem on STX GP3 SSA Board.
47240 Signed-off-by: Wolfgang Denk <wd@denx.de>
47242 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
47243 Author: Peter Pearse <peter.pearse@arm.com>
47244 Date: Tue Sep 11 15:35:01 2007 +0100
47248 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
47249 Author: Grzegorz Bernacki <gjb@semihalf.com>
47250 Date: Tue Sep 11 15:42:11 2007 +0200
47252 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
47253 scan on second pci bus.
47255 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
47257 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
47258 Author: Grzegorz Bernacki <gjb@semihalf.com>
47259 Date: Tue Sep 11 12:57:52 2007 +0200
47261 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
47263 Bamboo has a file sdram.c which needs special treatment when building in
47264 separate directory. It has to be linked to build directory otherwise it is
47267 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
47269 commit d45963854eff39d575124d859419bb4953ce2c87
47270 Author: Michal Simek <monstr@monstr.eu>
47271 Date: Tue Sep 11 00:37:04 2007 +0200
47273 [FIX] Microblaze ML401 - repare FLASH handling
47275 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
47276 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
47277 Date: Mon Sep 10 16:55:59 2007 +0100
47279 Allocate CPU Architecture Code for STMicroelectronics' ST200.
47281 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
47282 ---------------------------------------------------
47284 commit 754bac48156f8958d8f6a53a51eda88ab5758929
47285 Author: Wolfgang Denk <wd@denx.de>
47286 Date: Mon Sep 10 20:42:31 2007 +0200
47288 Update version to match current state.
47290 Signed-off-by: Wolfgang Denk <wd@denx.de>
47292 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
47293 Author: Grzegorz Bernacki <gjb@semihalf.com>
47294 Date: Mon Sep 10 17:39:08 2007 +0200
47296 [MPC512x] Streamline frame handling in the FEC driver
47298 - convert frame size settings to be derived from a single base
47299 - set frame size to the recommended default value
47301 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
47303 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
47304 Author: Kyungmin Park <kmpark@infradead.org>
47305 Date: Mon Sep 10 11:34:00 2007 +0900
47307 Remove compiler warning: target CPU does not support interworking
47309 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
47311 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
47312 Author: Wolfgang Denk <wd@denx.de>
47313 Date: Sun Sep 9 21:21:33 2007 +0200
47315 Fix compile error in spc1920 config.
47317 Signed-off-by: Markus Klotzbücher <mk@denx.de>
47318 Signed-off-by: Wolfgang Denk <wd@denx.de>
47320 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
47321 Author: Grant Likely <grant.likely@secretlab.ca>
47322 Date: Fri Sep 7 09:25:07 2007 -0600
47324 Bugfix: make bootm+libfdt compile on boards with no flash
47326 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47328 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
47329 Author: Grzegorz Bernacki <gjb@semihalf.com>
47330 Date: Fri Sep 7 18:35:37 2007 +0200
47332 [PPC440SPe] PCIe environment settings for Katmai and Yucca
47334 - 'pciconfighost' is set by default in order to be able to scan bridges
47335 behind the primary host/PCIe
47337 - 'pciscandelay' env variable is recognized to allow for user-controlled
47338 delay before the PCIe bus enumeration; some peripheral devices require a
47339 significant delay before they can be scanned (e.g. LSI8408E); without the
47340 delay they are not detected
47342 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
47344 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
47345 Author: Grzegorz Bernacki <gjb@semihalf.com>
47346 Date: Fri Sep 7 18:20:23 2007 +0200
47348 [PPC440SPe] Improve PCIe configuration space access
47350 - correct configuration space mapping
47351 - correct bus numbering
47352 - better access to config space
47354 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
47355 first device on the first bus. We now allow to configure up to 16 buses;
47356 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
47357 peripheral devices farther in hierarchy can be identified.
47359 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
47361 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
47362 Author: Grzegorz Bernacki <gjb@semihalf.com>
47363 Date: Fri Sep 7 17:46:18 2007 +0200
47365 [PPC440SPe] Convert machine check exceptions handling
47367 Convert using fixup mechanism to suppressing MCK for the duration of config
47368 read/write transaction: while fixups work fine with the case of a precise
47369 exception, we identified a major drawback with this approach when there's
47370 an imprecise case. In this scenario there is the following race condition:
47371 the fixup is (by design) set to catch the instruction following the one
47372 actually causing the exception; if an interrupt (e.g. decrementer) happens
47373 between those two instructions, the ISR code is executed before the fixup
47374 handler the machine check is no longer protected by the fixup handler as it
47375 appears as within the ISR code. In consequence the fixup approach is being
47376 phased out and replaced with explicit suppressing of MCK during a PCIe
47377 config read/write cycle.
47379 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
47381 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
47382 Author: Wolfgang Denk <wd@denx.de>
47383 Date: Fri Sep 7 17:43:36 2007 +0200
47385 Fix typo in MAKEALL script.
47387 Signed-off-by: Wolfgang Denk <wd@denx.de>
47389 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
47390 Author: Grzegorz Bernacki <gjb@semihalf.com>
47391 Date: Fri Sep 7 17:09:21 2007 +0200
47393 [MPC512x] Proper handling of larger frames in the FEC driver
47395 When frame larger than local RX buffer is received, it is split and handled
47396 by two buffer descriptors. Prior to this patch the FEC driver discarded
47397 contents of a buffer descriptor without the 'LAST' bit set, so the first
47398 part of the frame was lost in case of larger frames. This fix allows to
47399 safely combine the two pieces into the whole frame.
47401 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
47403 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
47404 Author: Rafal Jaworowski <raj@semihalf.com>
47405 Date: Fri Sep 7 17:05:36 2007 +0200
47407 [MPC512x] Correct fixup relocation
47409 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
47411 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
47412 Author: Wolfgang Denk <wd@denx.de>
47413 Date: Fri Sep 7 01:21:25 2007 +0200
47415 Update CHANGELOG, minor coding style cleanup.
47417 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
47418 Author: stefano babic <sbabic@denx.de>
47419 Date: Thu Aug 30 23:01:49 2007 +0200
47421 PXA270: Added support for TrizepsIV board.
47423 This patch add support for the Trizeps IV module (520Mhz).
47425 Signed-off-by: Stefano Babic <sbabic@denx.de>
47427 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
47428 Author: stefano babic <sbabic@denx.de>
47429 Date: Thu Aug 30 22:57:04 2007 +0200
47431 PXA270: Add support for multiple serial ports.
47433 This patch adds support for multiple serial ports to the PXA target.
47434 FFUART, BTUART and STUART are supported.
47436 Signed-off-by: Stefano Babic <sbabic@denx.de>
47438 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
47439 Author: stefano babic <sbabic@denx.de>
47440 Date: Thu Aug 30 22:48:47 2007 +0200
47442 PXA270: fix compile issue (invalid lvalue)
47444 Code is broken for PXA270 due to "invalid lvalue in assignment".
47446 This patch fix it in pxa-regs.h
47448 Signed-off-by: Stefano Babic <sbabic@denx.de>
47450 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
47451 Author: Jason Jin <Jason.jin@freescale.com>
47452 Date: Thu Aug 30 18:19:05 2007 +0800
47454 Add BUILD_DIR support for bios emulator.
47456 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
47458 commit b4d8a55145442f136982634862341a3e02002bda
47459 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47460 Date: Fri Aug 31 14:41:51 2007 +0900
47462 [MIPS] Remove inline asm string functions
47464 Stop using inline string functions on MIPS as other ARCHs do so,
47465 since the optimized inline asm versions are not small.
47467 This change is triggered by a following MIPS build error:
47468 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
47469 common/exports.c:32: undefined reference to `strcmp'
47470 make: *** [u-boot] Error 1
47472 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47474 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
47475 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47476 Date: Fri Aug 31 14:41:45 2007 +0900
47478 [MIPS] Update asm string header
47480 This patches contains several bugfixes and cleanups in the latest upstream:
47482 - Don't include linux/config.h
47483 - Remove buggy inline version of memscan.
47484 - Merge with Linux 2.6.11-rc3.
47485 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
47486 - Goodbye mips64. 31704 lines of code bite the dust.
47487 - Replace extern inline with static inline.
47488 - Fix return value of strncpy.
47489 - Remove a bunch more "$1" clobbers.
47491 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
47493 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
47494 Author: Bartlomiej Sieka <tur@semihalf.com>
47495 Date: Tue Sep 4 17:31:22 2007 +0200
47497 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
47499 Fix incorrect blob address calculation in do_bootm_linux() that prevents
47500 booting the kernel from a multi-file image (kernel + initrd + blob).
47502 Also, make minor updates to the U-Boot's output and to the coding style.
47504 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
47506 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
47507 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
47508 Date: Fri Aug 31 14:29:04 2007 +0200
47510 Add support for Sil680 IDE controller.
47512 o add drivers/sil680.c to support the Sil680 IDE-controller.
47513 o drivers/Makefile: add sil680.o.
47515 Signed-off-by: Gary Jennejohn <garyj@denx.de>
47517 commit e79021223bc339df655e360645a52c457a74b067
47518 Author: Grant Likely <grant.likely@secretlab.ca>
47519 Date: Thu Sep 6 09:47:40 2007 -0600
47521 bootm/fdt: Only process the fdt if an fdt address was provided
47523 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
47524 kernels using the board info structure (instead of passing a device tree)
47525 This change allows the old style booting to be used if the fdt argument
47526 was not passed to 'bootm'.
47528 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47529 Acked-by: Kim Phillips <kim.phillips@freescale.com>
47531 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
47532 Author: Grant Likely <grant.likely@secretlab.ca>
47533 Date: Thu Sep 6 09:46:23 2007 -0600
47535 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
47537 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
47539 Tested on: lite5200b
47541 Note: the fixup functions have not been moved to a common place. This
47542 patch is targeted for immediate merging as in solves a build issue, but
47543 the final name/location of the fixups is still subject to debate. I
47544 propose to merge this now, and move the fixups in the next merge window
47545 to be usable by all targets.
47547 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47549 commit 41bb76e941929f54a73206fb132f7a4c275543a3
47550 Author: Grant Likely <grant.likely@secretlab.ca>
47551 Date: Thu Sep 6 09:46:17 2007 -0600
47553 libfdt: add convenience function fdt_find_and_setprop()
47555 Given the path to a node, fdt_find_and_setprop() allows a property value
47556 to be set directly.
47558 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47560 commit 80767a6cead9990d9e77e62be947843c2c72f469
47561 Author: Peter Pearse <peter.pearse@arm.com>
47562 Date: Wed Sep 5 16:04:41 2007 +0100
47564 Changed API name to coloured_led.h
47565 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
47566 Tidied other cpu/arm920t/start.S code
47568 commit 56a9270521baaa00e12639a978302a67f61ef060
47569 Author: Kumar Gala <galak@kernel.crashing.org>
47570 Date: Thu Aug 30 16:18:18 2007 -0500
47572 Fix ULI RTC support on MPC8544 DS
47574 The RTC on the M1575 ULI chipset requires a dummy read before
47575 we are able to talk to the RTC. We accomplish this by adding a
47576 second memory region to the PHB the ULI is on and read from it.
47578 The second region is added to maintain compatiabilty with Linux's
47579 view of the PCI memory map.
47581 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
47583 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
47584 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
47585 Date: Thu Aug 30 01:58:48 2007 -0500
47587 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
47589 pcie is now differentiated from pci. Add 8641 bus-range updates.
47591 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
47593 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
47594 Author: Peter Pearse <peter.pearse@arm.com>
47595 Date: Tue Sep 4 16:18:38 2007 +0100
47597 Add coloured led interface for ARM boards.
47598 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
47600 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
47601 Author: Peter Pearse <peter.pearse@arm.com>
47602 Date: Tue Sep 4 14:49:28 2007 +0100
47604 Move include/led.h to board/at91rm9200dk
47606 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
47607 Author: Peter Pearse <peter.pearse@arm.com>
47608 Date: Tue Sep 4 14:25:51 2007 +0100
47610 Ran Lindent on drivers/at45.c
47612 commit 557ab89d294f08dd532f21d19861b40093200a33
47613 Author: Peter Pearse <peter.pearse@arm.com>
47614 Date: Tue Sep 4 14:23:50 2007 +0100
47616 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
47618 commit 81b73dec16fd1227369a191e725e10044a9d56b8
47619 Author: Gary Jennejohn <garyj@denx.de>
47620 Date: Fri Aug 31 15:21:46 2007 +0200
47622 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
47624 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
47625 set to non-zero, because it doesn't support MRM (memory-read-
47626 multiple) correctly. We now added the possibility to configure
47627 this register in the board config file, so that the default value
47628 of 8 can be overridden.
47630 Here the details of this patch:
47632 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
47633 board-specific settings. As an example the sequoia board requires 0.
47634 Idea from Stefan Roese <sr@denx.de>.
47635 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
47636 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
47637 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
47638 CFG_PCI_CACHE_LINE_SIZE to 0.
47640 Signed-off-by: Gary Jennejohn <garyj@denx.de>
47641 Signed-off-by: Stefan Roese <sr@denx.de>
47643 commit 60174746c668b309378a91488dded898e9553eae
47644 Author: Wolfgang Denk <wd@denx.de>
47645 Date: Fri Aug 31 10:01:51 2007 +0200
47647 Fix TFTP OACK code for short packets.
47649 The old code had a loop limit overflow bug which caused a semi-
47650 infinite loop for small packets, because in "i<len-8", "i" was signed,
47651 but "len" was unsigned, and "len-8" became a huge number for small
47654 This is a workaround which replaces broken commit 8f1bc284.
47656 Signed-off-by: Wolfgang Denk <wd@denx.de>
47658 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
47659 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
47660 Date: Thu Aug 30 15:03:05 2007 +0200
47662 Reduce BOOTDELAY variable to 1 second by default for STK1002
47664 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
47665 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47667 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
47668 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
47669 Date: Thu Aug 30 15:03:04 2007 +0200
47671 Remove double quotation marks around MAC address for STK1002
47673 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
47674 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47676 commit ff13ac8c7bbebb238e339592de765c546dba1073
47677 Author: Wolfgang Denk <wd@denx.de>
47678 Date: Thu Aug 30 14:42:15 2007 +0200
47680 Backout commit 8f1bc284 as it causes TFTP to fail.
47682 Signed-off-by: Wolfgang Denk <wd@denx.de>
47684 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
47685 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
47686 Date: Thu Aug 30 02:26:17 2007 -0500
47688 Revert "Fix MPC8544DS PCIe3 scsi."
47690 This reverts commit 9468e680.
47691 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
47693 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
47695 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
47696 Author: Grant Likely <grant.likely@secretlab.ca>
47697 Date: Wed Aug 29 18:26:24 2007 -0600
47699 tftp: don't implicity trust the format of recevied packets
47701 The TFTP OACK code trusts that the incoming packet is formated as
47702 ASCII text and can be processed by string functions. It also has a
47703 loop limit overflow bug where if the packet length is less than 8, it
47704 ends up looping over *all* of memory to find the 'blksize' string.
47706 This patch solves the problem by forcing the packet to be null
47707 terminated and using strstr() to search for the sub string.
47709 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
47711 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
47712 Author: Stefan Roese <sr@denx.de>
47713 Date: Wed Aug 29 16:31:18 2007 +0200
47715 ppc4xx: Change lwmon5 default environment to support Linux RTC
47717 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
47718 to supply the RTC I2C address as bootline parameter. This patch
47719 adds support for this rtc probing parameter to the bootargs:
47721 "rtc-pcf8563.probe=0,0x51"
47723 Signed-off-by: Stefan Roese <sr@denx.de>
47725 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
47726 Author: Kim Phillips <kim.phillips@freescale.com>
47727 Date: Wed Aug 29 09:06:05 2007 -0500
47729 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
47731 this had slipped through the cracks, since the sbc board was added
47732 after I wrote the original patch to remove all these symbols, and
47733 before it was merged.
47735 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
47737 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
47738 Author: Wolfgang Denk <wd@denx.de>
47739 Date: Wed Aug 29 14:05:30 2007 +0200
47741 Add mii_init() prototype
47743 to get rid of a *lot* of compiler warnings.
47745 Signed-off-by: Wolfgang Denk <wd@denx.de>
47747 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
47748 Author: Wolfgang Denk <wd@denx.de>
47749 Date: Wed Aug 29 13:35:03 2007 +0200
47751 Disable network support on cmi_mpc5xx board
47753 ..because it caused compiler errors and there seems to be no
47754 board maintainer to take care of this.
47756 Signed-off-by: Wolfgang Denk <wd@denx.de>
47758 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
47759 Author: Kumar Gala <galak@kernel.crashing.org>
47760 Date: Mon Aug 20 09:44:00 2007 -0500
47762 Fix MPC8544DS PCIe3 scsi.
47764 <ed.swarthout@freescale.com>
47766 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
47767 is allocating memory space it doesn't need.
47769 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
47770 Signed-off-by: Andy Fleming <afleming@freescale.com>
47772 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
47773 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
47774 Date: Tue Aug 21 09:38:59 2007 -0500
47778 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
47779 correct consoledev needed for linux boot.
47780 Standardize on fdt{file,addr} var to hold dtb file name.
47782 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
47784 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
47786 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
47787 Author: Haiying Wang <Haiying.Wang@freescale.com>
47788 Date: Thu Aug 23 15:20:54 2007 -0400
47790 Enable L2 cache for MPC8568MDS board
47792 The L2 cache size is 512KB for 8568, print out the correct informaiton.
47794 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
47796 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
47797 Author: Jason Jin <Jason.jin@freescale.com>
47798 Date: Wed Aug 22 17:54:49 2007 +0800
47800 Remove the bios emulator binary files from MAI board
47802 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
47804 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
47805 Author: Kim Phillips <kim.phillips@freescale.com>
47806 Date: Tue Aug 21 17:00:17 2007 -0500
47808 support board vendor-common makefiles
47810 if a board/$(VENDOR)/common/Makefile exists, build it.
47812 also add the first such case, board/freescale/common/Makefile, to
47813 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
47814 dictated by board configuration.
47816 thusly get rid of alternate build dir errors such as:
47818 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
47820 by putting the common/ mkdir command in its proper place (the common
47821 Makefile). Common bits from existing individual board Makefiles have
47824 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
47826 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
47827 Author: stefano babic <sbabic@denx.de>
47828 Date: Tue Aug 21 15:52:33 2007 +0200
47830 Fix: TFTP is not working on little endian systems
47832 TFTP does not work anymore after multicast tftp
47833 patch was applied on little endian systems.
47836 Signed-off-by: Stefano Babic <sbabic@denx.de>
47838 commit 5f470948570526e9186f053a3003da7719604e90
47839 Author: stefano babic <sbabic@denx.de>
47840 Date: Tue Aug 21 15:50:33 2007 +0200
47842 Fix MAC address setting in DM9000 driver.
47844 The logic to check if there is a correct MAC address in the DM9000
47845 EEPROM, added in the last patch, is wrong. Now the MAC address is
47846 always taken from the environment, even if a suitable MAC is present
47849 Signed-off-by: Stefano Babic <sbabic@denx.de>
47851 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
47852 Author: Martin Krause <martin.krause@tqs.de>
47853 Date: Tue Aug 21 12:40:34 2007 +0200
47855 MPC5xxx: fix some compiler warnings in USB code
47857 Fix the following warnings:
47858 - usb.c:xx: warning: function declaration isn't a prototype
47859 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
47860 from pointer wihtout a cast
47862 Signed-off-by: Martin Krause <martin.krase@tqs.de>
47864 commit 16e23c3f5dab6937f5109365416808c7f15c122b
47865 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
47866 Date: Mon Aug 20 23:55:33 2007 -0500
47868 fsl_pci_init - Remove self PCSRBAR allocation
47870 CPU physical address space was being wasted by allocating a
47871 PCSRBAR PCI inbound region to it's memory space.
47873 As a rule, PCSRBAR should be left alone since it does not affect
47874 transactions from self and other masters may have changed it.
47876 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
47878 commit 0e700ce03a23bb1921149bc77008ace7103d5289
47879 Author: Martin Krause <martin.krause@tqs.de>
47880 Date: Mon Aug 20 13:56:47 2007 +0200
47882 Fix compiler warning in include/s3c2410.h
47884 This patch fixes the "type qualifiers ignored on fuction return tpye"
47885 warning for include/s3c2410.h
47887 Signed-off-by: Martin Krause <martin.krause@tqs.de>
47889 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
47890 Author: Dirk Behme <dirk.behme@googlemail.com>
47891 Date: Mon Aug 20 07:09:05 2007 +0200
47893 Fix compilation error for omap2420h4_config.
47895 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
47896 and flash_probe() calls in env_flash.c.
47898 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
47900 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
47901 Author: Kim Phillips <kim.phillips@freescale.com>
47902 Date: Fri Aug 10 14:34:14 2007 -0500
47904 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
47906 and make some minor corrections to the FDT part of the README.
47908 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
47910 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
47911 Author: Wolfgang Denk <wd@denx.de>
47912 Date: Wed Aug 29 01:32:05 2007 +0200
47914 Minor coding style cleanup.
47916 Signed-off-by: Wolfgang Denk <wd@denx.de>
47918 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
47919 Author: Heiko Schocher <hs@pollux.denx.de>
47920 Date: Tue Aug 28 17:40:33 2007 +0200
47922 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
47924 Signed-off-by: Heiko Schocher <hs@denx.de>
47926 commit f98984cb194bb34dbe1db9429d3b51133af30d07
47927 Author: Heiko Schocher <hs@pollux.denx.de>
47928 Date: Tue Aug 28 17:39:14 2007 +0200
47930 IDE: - make ide_inb () and ide_outb () "weak", so boards can
47931 define there own I/O functions.
47932 (Needed for the pcs440ep board).
47933 - The default I/O Functions are again 8 Bit accesses.
47934 - Added CONFIG_CMD_IDE for the pcs440ep Board.
47936 Signed-off-by: Heiko Schocher <hs@denx.de>
47938 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
47939 Author: Semih Hazar <semih.hazar@indefia.com>
47940 Date: Mon Aug 20 19:00:01 2007 +0300
47942 AVR32: Change prototype of memset
47944 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
47945 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
47947 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
47948 Author: Yuri Tikhonov <yur@emcraft.com>
47949 Date: Sat Aug 25 05:07:16 2007 +0200
47951 POST: limit memory test area to not touch global data anymore
47953 As experienced on lwmon5, on some boards the POST memory test can
47954 corrupt the global data buffer (bd). This patch fixes this issue
47955 by checking and limiting this area.
47957 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
47958 Signed-off-by: Stefan Roese <sr@denx.de>
47960 commit 75e1a84d483e36be10e206e539b028c4889e1158
47961 Author: Stefan Roese <sr@denx.de>
47962 Date: Fri Aug 24 15:41:42 2007 +0200
47964 ppc4xx: Add RTC POST test to lwmon5 board configuration
47966 Since this RTC POST test is taking quite a while to complete
47967 it's only initiated upon special keypress same as the complete
47970 Signed-off-by: Stefan Roese <sr@denx.de>
47972 commit d7bfa620037a6d2210159387571bdf93aa32c162
47973 Author: Stefan Roese <sr@denx.de>
47974 Date: Fri Aug 24 15:19:10 2007 +0200
47976 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
47978 Signed-off-by: Stefan Roese <sr@denx.de>
47980 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
47981 Author: Stefan Roese <sr@denx.de>
47982 Date: Thu Aug 23 11:02:37 2007 +0200
47984 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
47986 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
47987 board. Now the "eeprom" command can be used to read/write from/to this
47988 device. Additionally a new command was added "eepromwp" to en-/disable
47989 the write-protect of this 2nd EEPROM.
47991 The 1st EEPROM is not affected by this write-protect command.
47993 Signed-off-by: Stefan Roese <sr@denx.de>
47995 commit c64fb30e4c5976007d56fc1789c7a0666082b536
47996 Author: Stefan Roese <sr@denx.de>
47997 Date: Wed Aug 22 08:56:09 2007 +0200
47999 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
48001 Signed-off-by: Stefan Roese <sr@denx.de>
48003 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
48004 Author: Stefan Roese <sr@denx.de>
48005 Date: Tue Aug 21 16:27:57 2007 +0200
48007 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
48009 This patch adds support for the matrix keyboard on the lwmon5 board.
48010 Since the implementation in the dsPCI is kind of compatible with the
48011 "old" lwmon board, most of the code is copied from the lwmon
48014 Signed-off-by: Stefan Roese <sr@denx.de>
48016 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
48017 Author: Wolfgang Denk <wd@denx.de>
48018 Date: Sun Aug 19 10:27:34 2007 +0200
48020 Fix some build errors.
48022 Signed-off-by: Wolfgang Denk <wd@denx.de>
48024 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
48025 Author: Wolfgang Denk <wd@denx.de>
48026 Date: Sat Aug 18 22:00:38 2007 +0200
48030 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
48031 Author: Kim Phillips <kim.phillips@freescale.com>
48032 Date: Thu Aug 16 22:52:39 2007 -0500
48034 lib_ppc: make board_add_ram_info weak
48036 platforms wishing to display RAM diagnostics in addition to size,
48037 can do so, on one line, in their own board_add_ram_info()
48040 this consequently eliminates CONFIG_ADD_RAM_INFO.
48042 Thanks to Stefan for the hint.
48044 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48046 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
48047 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
48048 Date: Fri Aug 17 12:43:44 2007 +0900
48050 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
48052 This patch has been sent on:
48055 Many users of PCI config read routines tend to ignore the function
48056 ret value, and are only concerned about the contents of *val. Based
48057 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
48058 the *val on dword read error.
48060 Without this fix, for example, we'll go on scanning bus with vendor or
48061 header_type uninitialized. This brings many unnecessary config trials.
48063 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
48065 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
48066 Author: Stefan Roese <sr@denx.de>
48067 Date: Sat Aug 18 14:37:52 2007 +0200
48069 ColdFire: Fix some remaining problems with CFG_CMD_
48071 Signed-off-by: Stefan Roese <sr@denx.de>
48073 commit 8280f6a1c43247616b68224675188e5ccd124650
48074 Author: Stefan Roese <sr@denx.de>
48075 Date: Sat Aug 18 14:33:02 2007 +0200
48077 Coding style cleanup
48079 Signed-off-by: Stefan Roese <sr@denx.de>
48081 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
48082 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48083 Date: Thu Aug 16 19:23:50 2007 -0500
48085 ColdFire: Add M5235EVB Platform for MCF523x
48087 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48089 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
48090 Author: Kim Phillips <kim.phillips@freescale.com>
48091 Date: Fri Aug 17 09:30:00 2007 -0500
48093 mpc83xx: fix typo in DDR2 programming
48095 introduced in the implement board_add_ram_info patch as I was cleaning out the
48096 magic numbers. sorry.
48098 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48100 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
48101 Author: Kim Phillips <kim.phillips@freescale.com>
48102 Date: Thu Aug 16 22:53:09 2007 -0500
48104 mpc83xx: move freescale boards to boards/freescale
48106 includes build fixes.
48108 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48110 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
48111 Author: Kim Phillips <kim.phillips@freescale.com>
48112 Date: Thu Aug 16 22:52:59 2007 -0500
48114 mpc83xx: suppress unused variable 'val8' warning
48116 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48118 commit bbea46f76f767b919070b4829bf34c86bd223248
48119 Author: Kim Phillips <kim.phillips@freescale.com>
48120 Date: Thu Aug 16 22:52:48 2007 -0500
48122 mpc83xx: implement board_add_ram_info
48124 add board_add_ram_info, to make memory diagnostic output more
48125 consistent. u-boot banner output now looks like:
48127 DRAM: 256 MB (DDR1, 64-bit, ECC on)
48129 and for boards with SDRAM on the local bus, a line such as this is
48132 SDRAM: 64 MB (local bus)
48134 also replaced some magic numbers with their equivalent define names.
48136 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48138 commit 14778585d1389d86d5846efec29e5fce892680ce
48139 Author: Tony Li <tony.li@freescale.com>
48140 Date: Fri Aug 17 10:35:59 2007 +0800
48142 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
48144 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
48145 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
48147 Signed-off-by Tony Li <tony.li@freescale.com>
48149 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
48150 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48151 Date: Thu Aug 16 15:05:11 2007 -0500
48153 ColdFire: Add M54455EVB for MCF5445x
48155 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48157 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
48158 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48159 Date: Thu Aug 16 13:20:50 2007 -0500
48161 ColdFire: Add M5253EVBE platform for MCF52x2
48163 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48165 commit a605aacd8324094199402816cc6d9124aba57b8d
48166 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48167 Date: Thu Aug 16 05:04:31 2007 -0500
48169 ColdFire: Add M5249EVB platform for MCF52x2
48171 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48173 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
48174 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48175 Date: Wed Aug 15 20:32:06 2007 -0500
48177 ColdFire: Update Freescale MCF52x2 platforms
48179 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48181 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
48182 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48183 Date: Wed Aug 15 19:55:10 2007 -0500
48185 ColdFire: Update EB+MCF-EV123 platform
48187 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48189 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
48190 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48191 Date: Wed Aug 15 19:46:38 2007 -0500
48193 ColdFire: update TASREG platform for MCF52x2
48195 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48197 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
48198 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48199 Date: Wed Aug 15 19:45:51 2007 -0500
48201 ColdFire: update r5200 platform for MCF52x2
48203 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48205 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
48206 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48207 Date: Wed Aug 15 19:43:20 2007 -0500
48209 ColdFire: idmr platform MCF52x2 update
48211 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48213 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
48214 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48215 Date: Wed Aug 15 19:41:06 2007 -0500
48217 ColdFire: cobra5272 platform for MCF52x2 update
48219 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48221 commit 56115665b4a64c10c01440c57749b265e0908fa4
48222 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48223 Date: Wed Aug 15 19:38:15 2007 -0500
48225 ColdFire: MCF52x2 Header files update
48227 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48229 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
48230 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48231 Date: Wed Aug 15 19:21:21 2007 -0500
48233 ColdFire: MCF52x2 update
48235 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48237 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
48238 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48239 Date: Wed Aug 15 18:46:11 2007 -0500
48241 ColdFire: MCF5329 update cache
48243 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48245 commit 7171977fb8fd77cfb6676953fa9a05789c450513
48246 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48247 Date: Wed Aug 15 15:40:20 2007 -0500
48249 ColdFire: MCF5329 header file clean up
48251 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48253 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
48254 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48255 Date: Wed Aug 15 15:39:17 2007 -0500
48257 ColdFire: MCF5329 Update and cleanup
48259 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
48261 commit 10327dc5541f947c0cf7e31fef86c4706169607a
48262 Author: Andy Fleming <afleming@freescale.com>
48263 Date: Thu Aug 16 16:35:02 2007 -0500
48265 Add CONFIG_HAS_ETH0 to all boards with TSEC
48267 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
48268 to update TSEC1's device-tree node, so we need to add it
48269 to all the boards with TSECs. Do this for 83xx and 86xx, too,
48270 since they will eventually do something similar.
48272 Signed-off-by: Andy Fleming <afleming@freescale.com>
48274 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
48275 Author: Kumar Gala <galak@kernel.crashing.org>
48276 Date: Thu Aug 16 15:05:04 2007 -0500
48278 Update MPC8544 DS PCI memory map
48280 The PCIe bus that the ULI M1575 is connected to has no possible way of
48281 needing more than the fixed amount of IO & Memory space needed by the ULI.
48283 So make it use far less IO & memory space and have it use the shared LAW. This
48284 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
48287 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
48289 commit ea5877e31ed63ade948fd1293895ec23fe01472e
48290 Author: Kumar Gala <galak@kernel.crashing.org>
48291 Date: Thu Aug 16 11:01:21 2007 -0500
48293 Fix up some fdt issues on 8544DS
48295 It looks like we had a merge issue that duplicated a bit of code
48296 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
48297 the MAC address properly set in the device tree on boot for TSEC1
48299 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
48301 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
48302 Author: Niklaus Giger <niklaus.giger@netstal.com>
48303 Date: Thu Aug 16 15:16:03 2007 +0200
48305 PPC4xx:HCU4/5 cleanup
48307 Minor cleanups to confirm to the u-boot coding style.
48308 Some german expressions -> english.
48309 HCU5 enforces a unique IP adress for a given slot in the rack.
48311 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
48313 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
48314 Author: Niklaus Giger <niklaus.giger@netstal.com>
48315 Date: Thu Aug 16 15:16:02 2007 +0200
48317 PPC4xx:HCU4/5 cleanup ecc/sdram init
48319 Make ecc initialisation robust, as DDR2-ECC errors may be generated
48320 while zeroing the RAM.
48322 Return 16 bytes (a cacheline) less than the available memory, as the
48323 board and/or PPC440EPx might have problems accessing the last bytes.
48325 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
48327 commit d35b508a55508535b6e8445b718585d27df733d3
48328 Author: Kim Phillips <kim.phillips@freescale.com>
48329 Date: Wed Aug 15 22:29:56 2007 -0500
48331 fdt: suppress unused variable 'bd' warning
48333 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48335 commit 82bd9ee77490588d4da785d75829ca63d0176baf
48336 Author: Andy Fleming <afleming@freescale.com>
48337 Date: Wed Aug 15 20:06:50 2007 -0500
48339 Fix warnings from of_data copy fix
48341 Forgot to cast of_flat_tree to ulong.
48343 Signed-off-by: Andy Fleming <afleming@freescale.com>
48345 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
48346 Author: Andy Fleming <afleming@freescale.com>
48347 Date: Wed Aug 15 20:03:44 2007 -0500
48349 Don't wait for disconnected TSECs
48351 The TSEC driver's PHY code waits a long time for autonegotiation to
48352 complete, even if the link is down. The PHY knows the link is
48353 down or up before autonegotiation completes, so we can short-circuit
48354 the process if the link is down.
48356 Signed-off-by: Andy Fleming <afleming@freescale.com>
48358 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
48359 Author: Andy Fleming <afleming@freescale.com>
48360 Date: Wed Aug 15 20:03:34 2007 -0500
48362 Fix numerous bugs in the 8568 UEC support
48364 Actually, fixed a large bug in the UEC for *all* platforms.
48365 How did this ever work?
48367 uec_init() did not follow the spec for eth_init(), and returned
48368 0 on success. Switch it to return the link like tsec_init()
48371 The immap for the 8568 was defined based on MPC8568, rather than
48376 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
48378 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
48381 Signed-off-by: Andy Fleming <afleming@freescale.com>
48383 commit 3a79013e2adda53332dfd0b511066a805e929a9d
48384 Author: Andy Fleming <afleming@freescale.com>
48385 Date: Wed Aug 15 20:03:25 2007 -0500
48387 Define tsec flag values in config files
48389 The tsec_info structure and array has a "flags" field for each
48390 ethernet controller. This field is the only reason there are
48391 settings. Switch to defining TSECn_FLAGS for each controller
48392 in the config header, and we can greatly simplify the array, and
48393 also simplify the addition of future boards.
48395 Signed-off-by: Andy Fleming <afleming@freescale.com>
48397 commit ec7238229507e7f47533a611ea8c53319d234cf3
48398 Author: Andy Fleming <afleming@freescale.com>
48399 Date: Wed Aug 15 20:03:13 2007 -0500
48401 Add support for building all boards with a TSEC
48403 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
48404 Now we can do a MAKEALL test on all of them!
48406 Signed-off-by: Andy Fleming <afleming@freescale.com>
48408 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
48409 Author: Andy Fleming <afleming@freescale.com>
48410 Date: Wed Aug 15 17:30:56 2007 -0500
48412 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
48414 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
48415 neglected to *also* put the code inside the similar #ifdef
48416 for CONFIG_OF_FLAT_TREE.
48418 Signed-off-by: Andy Fleming <afleming@freescale.com>
48420 commit 78f9fef7f406078c8bf7191e665a73f795157746
48421 Author: Scott Wood <scottwood@freescale.com>
48422 Date: Wed Aug 15 15:46:46 2007 -0500
48424 mpc885ads: Don't define CONFIG_BZIP2.
48426 bzip2 requires a significant chunk of malloc space, and there isn't
48427 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
48428 and a downloaded image at 0x400000.
48430 Signed-off-by: Scott Wood <scottwood@freescale.com>
48432 commit 002275a3ed8b114885f6702d6d544d0780dfe689
48433 Author: Michal Simek <Monstr@seznam.cz>
48434 Date: Thu Aug 16 08:54:10 2007 +0200
48436 Bios emulator - fix microblaze toolchain problem
48438 microblaze CPU have problem with bios_emulator code.
48439 Microblaze toolchain doesn't support PRAGMA PACK.
48441 Signed-off-by: Michal Simek <monstr@monstr.eu>
48443 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
48444 Author: Wolfgang Denk <wd@denx.de>
48445 Date: Thu Aug 16 11:51:04 2007 +0200
48447 Minor Coding Style fix; Update CHANGELOG file.
48449 Signed-off-by: Wolfgang Denk <wd@denx.de>
48451 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
48452 Author: Stefan Roese <sr@denx.de>
48453 Date: Thu Aug 16 11:21:49 2007 +0200
48455 ppc4xx: Remove #warning in esd auto_update.c
48457 Signed-off-by: Stefan Roese <sr@denx.de>
48459 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
48460 Author: Stefan Roese <sr@denx.de>
48461 Date: Fri Jun 22 17:32:28 2007 +0200
48463 ppc7xx: Update CPCI750 board
48465 This small CPCI750 update extends the board specific command
48466 "show_config" to display the Marvell strapping registers and
48467 extends the PCI IDE controller.
48469 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
48470 Signed-off-by: Stefan Roese <sr@denx.de>
48472 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
48473 Author: Michal Simek <monstr@monstr.eu>
48474 Date: Thu Aug 16 10:46:28 2007 +0200
48476 [FIX] Changes for bios_emulator code for others architecture
48478 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
48479 Author: Michal Simek <monstr@monstr.eu>
48480 Date: Thu Aug 16 10:45:09 2007 +0200
48482 [FIX] Remove unused include file
48484 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
48485 Author: Stefan Roese <sr@denx.de>
48486 Date: Thu Aug 16 10:18:33 2007 +0200
48488 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
48490 Signed-off-by: Stefan Roese <sr@denx.de>
48492 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
48493 Author: Stefan Roese <sr@denx.de>
48494 Date: Thu Aug 16 09:54:51 2007 +0200
48496 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
48498 Signed-off-by: Stefan Roese <sr@denx.de>
48500 commit 02ba7022f62bb75908296c58c63866e1d294b69a
48501 Author: Stefan Roese <sr@denx.de>
48502 Date: Thu Aug 16 09:52:29 2007 +0200
48504 ppc4xx: Update Sequoia/Rainier bootstrap command
48506 As suggested by David Mitchell, here an update for the Sequoia/Rainier
48509 Signed-off-by: Stefan Roese <sr@denx.de>
48511 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
48512 Author: Kim Phillips <kim.phillips@freescale.com>
48513 Date: Wed Aug 15 22:30:39 2007 -0500
48515 mpc83xx: enable libfdt by default on freescale boards
48517 this enables libfdt code by default for the
48518 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
48519 mpc8349itx and gp boards.
48521 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48523 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
48524 Author: Kim Phillips <kim.phillips@freescale.com>
48525 Date: Wed Aug 15 22:30:33 2007 -0500
48527 mpc83xx: migrate remaining freescale boards to libfdt
48529 this adds libfdt support code for the freescale
48530 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
48533 Boards remain compatible with OF_FLAT_TREE.
48535 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48537 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
48538 Author: Kim Phillips <kim.phillips@freescale.com>
48539 Date: Wed Aug 15 22:30:26 2007 -0500
48541 mpc83xx: move common /memory node update mechanism to cpu.c
48543 also adds common prototypes to include/common.h.
48545 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48547 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
48548 Author: Kim Phillips <kim.phillips@freescale.com>
48549 Date: Wed Aug 15 22:30:19 2007 -0500
48551 mpc83xx: remaining 8360 libfdt fixes
48553 PCI clocks and QE frequencies weren't being updated, and the core clock
48554 was being updated incorrectly. This patch also adds a /memory node if
48555 it doesn't already exist prior to update.
48557 plus some cosmetic trimming to single line comments.
48559 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48561 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
48562 Author: Kim Phillips <kim.phillips@freescale.com>
48563 Date: Wed Aug 15 22:30:12 2007 -0500
48565 mpc83xx: fix UEC2->1 typo in libfdt setup code
48567 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48569 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
48570 Author: Kim Phillips <kim.phillips@freescale.com>
48571 Date: Wed Aug 15 22:30:05 2007 -0500
48573 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
48575 and reorder the existing 83xx maintainers alpha.
48577 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
48579 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
48580 Author: Michal Simek <monstr@monstr.eu>
48581 Date: Wed Aug 15 21:15:05 2007 +0200
48583 [FIX] Resolve problem with warnings
48584 microblaze toolchain don't support PRAGMA PACK.
48586 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
48587 Author: Michal Simek <monstr@monstr.eu>
48588 Date: Wed Aug 15 21:05:07 2007 +0200
48590 [FIX] Correction command setting for Microblaze boards
48592 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
48593 Author: Michal Simek <monstr@monstr.eu>
48594 Date: Wed Aug 15 21:03:41 2007 +0200
48596 [FIX] Correction command definition
48598 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
48599 Author: Jon Loeliger <jdl@freescale.com>
48600 Date: Wed Aug 15 11:55:35 2007 -0500
48602 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
48604 Remove a leftover in net/tftp.c while we're at it.
48606 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48608 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
48609 Author: Jon Loeliger <jdl@freescale.com>
48610 Date: Wed Aug 15 12:20:40 2007 -0500
48612 Move the MPC8641HPCN board under board/freescale.
48614 Minor path corrections needed to ensure buildability.
48616 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48618 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
48619 Author: Jon Loeliger <jdl@freescale.com>
48620 Date: Wed Aug 15 11:46:22 2007 -0500
48622 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
48624 Remove a leftover in net/tftp.c while we're at it.
48626 Signed-off-by: Jon Loeliger <jdl@freescale.com>
48628 commit 210f463c71917b7a4495c2103c228b9c179ae64d
48629 Author: Jerry Van Baren <gvb.uboot@gmail.com>
48630 Date: Wed Aug 15 11:13:15 2007 -0400
48632 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
48634 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
48635 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
48636 when it should have gone inside of the conditional. As a result, it
48637 broke non-LIBFDT board builds.
48639 Also added a missing "not." to the comment.
48641 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
48643 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
48644 Author: Niklaus Giger <niklaus.giger@netstal.com>
48645 Date: Wed Aug 15 12:14:23 2007 +0200
48647 PPC4xx:HCU4/5-Board fix compile warning
48649 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
48651 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
48652 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
48653 Date: Tue Aug 14 14:06:45 2007 -0500
48655 Fix malloc size error in ahci_init_one.
48657 Typically this causes scsi init to corrupt the
48658 devlist and break the coninfo command.
48659 Fix a compiler size warning.
48661 Signed-off-by: Jason Jin <jason.jin@freescale.com>
48662 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
48663 Acked-by: Andy Fleming <afleming@freescale.com>
48665 commit b361acd64fd2525c081b9b288b0804efe209c0e9
48666 Author: ksi@koi8.net <ksi@koi8.net>
48667 Date: Tue Aug 14 10:02:16 2007 -0700
48669 TI DaVinci - fix unsupported %hhx format
48671 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
48673 commit f01dbb5424a81453c81190dd30e945891466f621
48674 Author: Wolfgang Denk <wd@denx.de>
48675 Date: Tue Aug 14 18:42:36 2007 +0200
48677 Coding style cleanup. Update CHANGELOG.
48679 Signed-off-by: Wolfgang Denk <wd@denx.de>
48681 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
48682 Author: Andy Fleming <afleming@freescale.com>
48683 Date: Tue Aug 14 10:32:59 2007 -0500
48685 Fix initrd/dtb interaction
48687 The original code would wrongly relocate the blob to be right before
48688 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
48689 if it is defined. So we make two changes:
48691 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
48693 2) If the blob is being relocated, relocate it before kbd, not initrd
48695 Signed-off-by: Andy Fleming <afleming@freescale.com>
48697 commit e54b970173769307a116bd34028b6d0c2eea2a4e
48698 Author: Peter Pearse <peter.pearse@arm.com>
48699 Date: Tue Aug 14 15:40:00 2007 +0100
48701 Supply spi interface in at45.c
48703 commit 4ce846ec59f36b85d6644a769690ad3feb667575
48704 Author: Stefan Roese <sr@denx.de>
48705 Date: Tue Aug 14 15:12:01 2007 +0200
48707 POST: Fix merge problem
48709 Signed-off-by: Stefan Roese <sr@denx.de>
48711 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
48712 Author: Stefan Roese <sr@denx.de>
48713 Date: Tue Aug 14 15:03:17 2007 +0200
48715 Coding style cleanup
48717 Signed-off-by: Stefan Roese <sr@denx.de>
48719 commit 779e975117a75e91fcebe226a63104dbfb924ab1
48720 Author: Stefan Roese <sr@denx.de>
48721 Date: Tue Aug 14 14:44:41 2007 +0200
48723 ppc4xx: Add initial Zeus (PPC405EP) board support
48725 Signed-off-by: Stefan Roese <sr@denx.de>
48727 commit c5a172a5fd636c12467429e3f7910e53773979c6
48728 Author: Stefan Roese <sr@denx.de>
48729 Date: Tue Aug 14 14:41:55 2007 +0200
48731 POST: Add option for external ethernet loopback test
48733 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
48734 is not done using an internal loopback connection, but by assuming
48735 that an external loopback connector is plugged into the board.
48737 Signed-off-by: Stefan Roese <sr@denx.de>
48739 commit eb2b4010ae426245172988804ee8d9193fb41038
48740 Author: Stefan Roese <sr@denx.de>
48741 Date: Tue Aug 14 14:39:44 2007 +0200
48743 POST: Add ppc405 support to cache and UART POST
48745 Signed-off-by: Stefan Roese <sr@denx.de>
48747 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
48748 Author: Peter Pearse <peter.pearse@arm.com>
48749 Date: Tue Aug 14 10:46:32 2007 +0100
48751 Replace lost end of at45.c.
48753 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
48754 Author: Peter Pearse <peter.pearse@arm.com>
48755 Date: Tue Aug 14 10:30:06 2007 +0100
48757 Update Makefiles for merged and split at45.c.
48759 commit 3454cece2db57cb9eb7087995f7e73066a163f71
48760 Author: Peter Pearse <peter.pearse@arm.com>
48761 Date: Tue Aug 14 10:21:06 2007 +0100
48763 Delete the merged files.
48765 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
48766 Author: Peter Pearse <peter.pearse@arm.com>
48767 Date: Tue Aug 14 10:14:05 2007 +0100
48771 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
48772 Author: Peter Pearse <peter.pearse@arm.com>
48773 Date: Tue Aug 14 10:10:52 2007 +0100
48775 Add MACH_TYPE records for several AT91 boards.
48776 Merge to two at45.c files into a common file, split to at45.c and spi.c
48777 Fix spelling error in DM9161 PHY Support.
48778 Initialize at91rm9200 board (and set LED).
48779 Add PIO control for at91rm9200dk LEDs and Mux.
48780 Change dataflash partition boundaries to be compatible with Linux 2.6.
48782 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
48783 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
48785 commit 4ef35e53c693556c54b0c22d6f873de87bade253
48786 Author: Wolfgang Denk <wd@denx.de>
48787 Date: Tue Aug 14 09:54:46 2007 +0200
48789 Coding style cleanup, update CHANGELOG
48791 Signed-off-by: Wolfgang Denk <wd@denx.de>
48793 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
48794 Author: Wolfgang Denk <wd@denx.de>
48795 Date: Tue Aug 14 09:47:27 2007 +0200
48797 Coding style cleanup; rebuild CHANGELOG
48799 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
48800 Author: Randy Vinson <rvinson@linuxbox.(none)>
48801 Date: Tue Feb 27 19:42:22 2007 -0700
48803 85xxCDS: Add make targets for legacy systems.
48805 The PCI ID select values on the Arcadia main board differ depending
48806 on the version of the hardware. The standard configuration supports
48807 Rev 3.1. The legacy target supports Rev 2.x.
48809 Signed-off-by Randy Vinson <rvinson@mvista.com>
48811 commit e41094c7e38177c755fbd9b182018069614f080d
48812 Author: Andy Fleming <afleming@freescale.com>
48813 Date: Tue Aug 14 01:50:09 2007 -0500
48815 85xxCDS: Enable the VIA PCI-to-ISA bridge.
48817 Author: Randy Vinson <rvinson@linuxbox.(none)>
48819 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
48820 Arcadia main board.
48822 Signed-off-by: Randy Vinson <rvinson@mvista.com>
48823 Signed-off-by: York Sun <yorksun@freescale.com>
48825 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
48826 Author: Andy Fleming <afleming@freescale.com>
48827 Date: Tue Aug 14 00:14:25 2007 -0500
48829 Add support for UEC to 8568
48831 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
48832 Signed-off-by: Andy Fleming <afleming@freescale.com>
48834 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
48835 Author: Haiying Wang <Haiying.Wang@freescale.com>
48836 Date: Tue Jun 19 14:18:34 2007 -0400
48838 Add PCI support for MPC8568MDS board
48840 This patch is against u-boot-mpc85xx.git of www.denx.com
48842 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
48843 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
48845 commit d111d6382c99fdea08c2312eeeae8786945e189a
48846 Author: Haiying Wang <Haiying.Wang@freescale.com>
48847 Date: Tue Jun 19 14:18:32 2007 -0400
48849 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
48851 This patch is against u-boot-mpc85xx.git of www.denx.com
48853 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
48854 both MPC8548CDS board and MPC8568MDS board, especially for supporting
48857 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
48858 DDR2 on all current board versions especially ver 1.92 or later to bring
48861 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
48863 commit 3db0bef59eab1155801618cef5c481e97553b597
48864 Author: Kumar Gala <galak@kernel.crashing.org>
48865 Date: Tue Aug 7 18:07:27 2007 -0500
48867 Use an absolute address when jumping out of 4k boot page
48869 On e500 when we leave the 4k boot page we should use an absolute address since
48870 we don't know where the board code may want us to be really running at.
48872 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
48874 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
48875 Author: Andy Fleming <afleming@freescale.com>
48876 Date: Mon Aug 13 14:49:59 2007 -0500
48878 MPC85xx BA bits not set for 3-bit bank address DIMM
48880 The current implementation does not set the number of bank address bits
48881 (BA) in the processor. The default assumes 2 logical bank bits. This
48882 works fine for a DIMM that uses devices with 4 internal banks (SPD
48883 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
48884 devices with 8 internal banks (SPD byte17 = 0x8).
48886 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
48888 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
48889 Author: Andy Fleming <afleming@freescale.com>
48890 Date: Mon Aug 13 14:38:06 2007 -0500
48892 Fix minor 85xx warnings
48894 Some patches had inserted warnings into the build:
48895 * mpc8560ads declared data without using it
48896 * cpu_init declared ecm and immap without using it in all CONFIGs
48897 * MPC8548CDS.h had its default filenames changed so that they contained
48898 "\m" in the paths. Made the defaults not Windows-specific (or
48901 Signed-off-by: Andy Fleming <afleming@freescale.com>
48903 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
48904 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
48905 Date: Fri Jul 27 01:50:52 2007 -0500
48907 8548cds PCIE support.
48909 Make the early L1 cache stack region guarded to prevent speculative
48910 fetches outside the locked range.
48912 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
48913 init.S whitespace cleanup.
48915 Allow TEXT_BASE value to be specified on command line. This allows it
48916 to be set to 0xfffc0000 which cuts the uboot binary in half.
48918 Clear and enable lbc and ecm errors.
48920 Update last_busno in device-tree for pci and pcie.
48922 Remove load of obsolete cpu/mpc85xx/pci.0
48924 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
48925 Acked-by: Andy Fleming <afleming@freescale.com>
48927 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
48928 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
48929 Date: Fri Jul 27 01:50:51 2007 -0500
48931 8544ds PCIE support
48933 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
48935 Enable LBC and ECM errors and clear error registers.
48937 Add tftpflash env var to get uboot from tftp server and flash it.
48939 Add pci/pcie convenience env vars to display register space:
48940 "run pcie3regs" to see all pcie3 ccsr registers
48941 "run pcie3cfg" to see all cfg registers
48942 Whitespace cleanup and MPC8544DS.h
48944 Enable CONFIG_INTERRUPTS.
48946 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
48947 Acked-by: Andy Fleming <afleming@freescale.com>
48949 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
48950 Author: Andy Fleming <afleming@freescale.com>
48951 Date: Tue Aug 14 01:34:21 2007 -0500
48953 85xx start.S cleanup and exception support
48955 From: Ed Swarthout <Ed.Swarthout@freescale.com>
48957 Support external interrupts from platform to eliminate system hangs.
48958 Define CONFIG_INTERRUPTS board configure option to enable.
48959 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
48961 Remove extra cpu initialization redundant with hardware initialization.
48962 Whitespace cleanup.
48964 Define and use _START_OFFSET consistent with other processors using
48967 Move additional code from .text to boot page to make room for
48968 exception vectors at start of image.
48970 Handle Machine Check, External and Critical exceptions.
48972 Fix e500 machine check error determination in traps.c
48974 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
48976 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
48977 Acked-by: Andy Fleming <afleming@freescale.com>
48979 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
48980 Author: Andy Fleming <afleming@freescale.com>
48981 Date: Tue Aug 14 01:33:18 2007 -0500
48983 Add MPC8544DS README
48985 Signed-off-by: Andy Fleming <afleming@freescale.com>
48987 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
48988 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
48989 Date: Fri Jul 27 01:50:48 2007 -0500
48991 85xx allow debugger to configure ddr.
48993 Only check for mpc8548 rev 1 when compiled for 8548.
48995 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
48996 Acked-by: Andy Fleming <afleming@freescale.com>
48998 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
48999 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49000 Date: Fri Jul 27 01:50:47 2007 -0500
49002 mpc85xx L2 cache reporting and SRAM relocation option.
49004 Allow debugger to override flash cs0/cs1 settings to enable alternate
49007 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49008 Acked-by: Andy Fleming <afleming@freescale.com>
49010 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
49011 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49012 Date: Fri Jul 27 01:50:46 2007 -0500
49014 e500 needs ppc_asm.tmp MCK_EXCEPTION
49016 Always define MCK_EXCEPTION macro - so e500 can use it too.
49018 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49019 Acked-by: Andy Fleming <afleming@freescale.com>
49021 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
49022 Author: David Updegraff <dave@cray.com>
49023 Date: Mon Jun 11 10:41:07 2007 -0500
49025 multicast tftp: RFC2090
49027 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
49028 on Realtek RTL8139 and Freescale TSEC.
49030 Signed-off-by: David Updegraff <dave@cray.com>
49031 Signed-off-by: Ben Warren <bwarren@qstreams.com>
49033 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
49034 Author: Wilson Callan <wcallan@savantav.com>
49035 Date: Sat Jul 28 10:56:13 2007 -0400
49037 New CONFIG_BOOTP_SERVERIP option
49039 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
49040 from the bootp server
49042 Signed-off-by: Wilson Callan <wcallan@savantav.com>
49043 Signed-off-by: Ben Warren <bwarren@qstreams.com>
49045 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
49046 Author: Mike Rapoport <mike@compulab.co.il>
49047 Date: Sun Aug 12 08:48:27 2007 +0300
49049 Add ability to take MAC address from the environment to DM9000 driver
49051 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
49052 Signed-off-by: Ben Warren <bwarren@qstreams.com>
49054 commit be5d72d10d47609326226225181e301fb9a33b58
49055 Author: Wolfgang Denk <wd@denx.de>
49056 Date: Mon Aug 13 21:57:53 2007 +0200
49058 Minor coding style cleanup. Update CHANGELOG.
49060 Signed-off-by: Wolfgang Denk <wd@denx.de>
49062 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
49063 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
49064 Date: Sat Aug 11 06:54:58 2007 -0500
49066 Modify SBC8641D to use new Freescale PCI routines
49068 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
49071 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
49072 Signde-off-by: Jon Loeliger <jdl@freescale.com>
49074 commit a08458303e7f9db67f296980036d3292c35cb45c
49075 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
49076 Date: Fri Jun 29 18:38:51 2007 +0200
49078 atmel_mci: Fix data timeout value
49080 Calculate the data timeout based on values from the CSD instead of
49081 just using a hardcoded DTOR value. This is a backport of a similar fix
49082 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
49085 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
49087 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
49088 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
49089 Date: Mon Aug 13 17:22:31 2007 +0200
49091 AVR32: Include <div64.h> instead of <asm/div64.h>
49093 include/asm-avr32/div64.h was recently moved to include/div64.h, but
49094 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
49095 the patch was merged perhaps?)
49097 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
49100 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
49102 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
49103 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
49104 Date: Wed Jun 27 13:34:26 2007 +0200
49106 atmel_mci: Use 512 byte blocksize if possible
49108 Instead of always using the largest blocksize the card supports, check
49109 if it can support smaller block sizes and use 512 bytes if possible.
49110 Most cards do support this, and other parts of u-boot seem to have
49111 trouble with block sizes different from 512 bytes.
49113 Also enable underrun/overrun protection.
49115 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
49116 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
49118 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
49119 Author: Stefan Roese <sr@denx.de>
49120 Date: Mon Aug 13 09:05:33 2007 +0200
49122 ppc4xx: Fix problem in PLL clock calculation
49124 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
49125 and fixes a bug in the PLL clock calculation.
49127 Signed-off-by: Stefan Roese <sr@denx.de>
49129 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
49130 Author: Wolfgang Denk <wd@denx.de>
49131 Date: Sun Aug 12 21:34:50 2007 +0200
49135 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
49136 Author: Wolfgang Denk <wd@denx.de>
49137 Date: Sun Aug 12 21:34:34 2007 +0200
49139 Minor alignment of output, 2nd try.
49140 Also update CHANGELOG
49142 Signed-off-by: Wolfgang Denk <wd@denx.de>
49144 commit 6b309f22a724fad8418e811751a0741b893419cf
49145 Author: Wolfgang Denk <wd@denx.de>
49146 Date: Sun Aug 12 20:35:49 2007 +0200
49148 Minor alignment of output
49150 Signed-off-by: Wolfgang Denk <wd@denx.de>
49152 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
49153 Author: Wolfgang Denk <wd@denx.de>
49154 Date: Sun Aug 12 18:28:18 2007 +0200
49156 Cleanup output on ADS5121 board
49158 Signed-off-by: Wolfgang Denk
49160 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
49161 Author: Wolfgang Denk <wd@denx.de>
49162 Date: Sun Aug 12 15:11:38 2007 +0200
49164 Adapt board configuration and fix kernel crash on MCC200 board.
49166 The update procedure was modified to turn off the USB subsystem
49167 before exit for MCC200 and TRAB. This is necessary as otherwise the
49168 USB controller continues to write periodically to system memory!
49170 MCC200-specific notes:
49171 - the patch disables the magic key check for MCC200
49172 - the patch contains the configuration changes made
49173 for the new revision of the board.
49175 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
49176 Signed-off-by: Wolfgang Denk <wd@denx.de>
49178 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
49179 Author: Wolfgang Denk <wd@denx.de>
49180 Date: Sun Aug 12 14:47:54 2007 +0200
49182 Adjust default configuration of ADS5121 board.
49184 Signed-off-by: Wolfgang Denk <wd@denx.de>
49186 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
49187 Author: Wolfgang Denk <wd@denx.de>
49188 Date: Sun Aug 12 14:27:39 2007 +0200
49190 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
49192 Signed-off-by: Wolfgang Denk <wd@denx.de>
49194 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
49195 Author: Gerald Van Baren <vanbaren@cideas.com>
49196 Date: Tue Aug 7 21:14:22 2007 -0400
49198 Improve error print messages.
49200 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49202 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
49203 Author: Kim Phillips <kim.phillips@freescale.com>
49204 Date: Tue Jul 17 13:57:04 2007 -0500
49206 fdt: allow for builds that don't want env and bd_t nodes
49208 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
49211 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49213 commit 91148bf7aeba142d6f348805db7625db7da64d6f
49214 Author: Kim Phillips <kim.phillips@freescale.com>
49215 Date: Tue Jul 17 13:56:53 2007 -0500
49217 fdt: do board setup based on fdt address specified on bootm line
49219 The last fdt patch to bootm did board setup based on the address
49220 specified by a prior fdt address command invocation. The bootm
49221 code, as its call to fdt_chosen does, should use the fdt specified
49222 by the user on the bootm command. Note this restores full
49223 functionality for the 8360's existing default boot environment
49224 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
49225 before booting a kernel).
49227 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49229 commit e125a2ffc209dd34794e326c7175658253beadf3
49230 Author: Gerald Van Baren <vanbaren@cideas.com>
49231 Date: Tue Jul 10 20:40:39 2007 -0400
49233 Call ft_board_setup() from the bootm command.
49235 In the patch titled "Create new fdt boardsetup command..." I removed the
49236 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
49237 to add a direct call back into cmd_bootm.c
49239 This fixes the oversight by adding the direct call to the bootm command.
49241 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49243 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
49244 Author: Gerald Van Baren <vanbaren@cideas.com>
49245 Date: Mon Jun 25 23:25:28 2007 -0400
49247 Create new fdt boardsetup command, fix bug parsing [] form of set values.
49249 Previously ft_board_setup() was called by fdt_chosen() which was not
49250 really correctly structured. This splits ft_board_setup() out by creating
49251 a new fdt boardsetup command.
49253 Fix a bug when parsing fdt set command values which have the square
49254 bracket form [00 11 22 33] - the length was updated incorrectly in when
49257 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49259 commit 6f35ded9e85493595e0eb66a82b502a95326d049
49260 Author: Gerald Van Baren <vanbaren@cideas.com>
49261 Date: Mon Jun 25 20:55:58 2007 -0400
49263 Tighten up the error messages.
49265 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49267 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
49268 Author: Gerald Van Baren <vanbaren@cideas.com>
49269 Date: Mon Jun 25 19:52:23 2007 -0400
49271 Asthetic improvements: error messages and line lengths.
49273 Tighten up the error messages, split overlength lines.
49275 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49277 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
49278 Author: Gerald Van Baren <vanbaren@cideas.com>
49279 Date: Fri May 25 22:08:57 2007 -0400
49281 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
49283 The fdt_chosen() function was adding/seting some properties ad-hoc
49284 improperly and duplicated (poorly) what was done in ft_board_setup()
49286 Clean up long lines (setting properties, printing errors).
49288 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49290 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
49291 Author: Gerald Van Baren <vanbaren@cideas.com>
49292 Date: Mon May 21 23:27:16 2007 -0400
49294 For fdt_find_node_by_path(), handle the root path properly.
49296 Also removes the special case root path detection in cmd_fdt.c since it
49297 is no longer necessary.
49299 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49301 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
49302 Author: Gerald Van Baren <vanbaren@cideas.com>
49303 Date: Thu May 17 23:54:36 2007 -0400
49305 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
49307 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
49308 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
49310 commit 1a861169bc3758f9de3aead62b058736c6891246
49311 Author: Gerald Van Baren <vanbaren@cideas.com>
49312 Date: Wed Jun 6 22:47:58 2007 -0400
49314 Replace fdt_node_offset() with fdt_find_node_by_path().
49316 The new name matches more closely the kernel's name, which is also
49317 a much better description.
49319 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
49320 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
49322 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
49323 Author: Gerald Van Baren <vanbaren@cideas.com>
49324 Date: Wed May 16 22:39:59 2007 -0400
49326 Fix cmd_fdt line lengths, refactor code.
49328 Break lines that were greater than 80 characters in length.
49329 Move the fdt print and property parsing code to separate static functions
49330 to reduce coding clutter in the fdt_cmd handling body.
49332 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49334 commit 25114033ab21788810c48ba4df103b649da1223b
49335 Author: Gerald Van Baren <vanbaren@cideas.com>
49336 Date: Sat May 12 09:47:25 2007 -0400
49338 FDT command improvements.
49340 Fix "fdt set" so that it will create a non-existing property.
49341 Add "fdt mknode" to create nodes.
49343 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49345 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
49346 Author: Gerald Van Baren <vanbaren@cideas.com>
49347 Date: Sat May 12 09:45:46 2007 -0400
49349 Reorganize and fix problems (returns) in the bootm command.
49351 Do *NOT* return after the "point of no return" has been passed.
49352 If something goes wrong, the board must be reset after that point.
49353 Move the "Transferring control to Linux" debug message back to where it
49354 belongs: just before transferring control to linux.
49356 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49358 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
49359 Author: Gerald Van Baren <vanbaren@cideas.com>
49360 Date: Tue May 8 21:27:35 2007 -0400
49362 Fix bugs in the CONFIG_OF_LIBFDT
49364 Stupid coding mistakes (identified by Timur Tabi, thanks).
49366 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49368 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
49369 Author: Gerald Van Baren <vanbaren@cideas.com>
49370 Date: Wed Apr 25 22:47:15 2007 -0400
49372 Improve fdt move length handling.
49374 Make the length parameter optional: if not specified, do the move using
49375 the current size unchanged.
49377 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49379 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
49380 Author: Gerald Van Baren <vanbaren@cideas.com>
49381 Date: Wed Apr 25 22:23:36 2007 -0400
49383 Minor code clean up.
49385 Declare the variable fdt properly as extern.
49386 Call the "set_fn" function pointer the "short way" without the full
49387 dereferencing syntax.
49389 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49391 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
49392 Author: Gerald Van Baren <vanbaren@cideas.com>
49393 Date: Wed Apr 25 21:24:27 2007 -0400
49395 Improve error messages, more informative.
49397 Print more than the raw libfdt error message strings. This is especially
49398 useful for cluing in the user when the bootm command aborts due to
49401 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49403 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
49404 Author: Gerald Van Baren <vanbaren@cideas.com>
49405 Date: Fri Apr 20 22:46:53 2007 -0400
49407 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
49409 This is the way u-boot reduces configured-out code. At Wolfgang
49410 Grandegger and Wolfgang Denk's request, make libfdt conform.
49412 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49414 commit 923efd286411ed052d9e074f59f8986d6081061c
49415 Author: Bruce Adler <bruce.adler@ccpu.com>
49416 Date: Fri Aug 10 14:54:47 2007 -0700
49418 add image size and descriptors for Spartan 3E FPGA chips
49420 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
49422 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
49424 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
49425 Author: Kim Phillips <kim.phillips@freescale.com>
49426 Date: Fri Aug 10 15:34:48 2007 -0500
49428 make MAKEALL more immune to merge conflicts
49430 ..by placing board entries one per line, as suggested by jdl.
49432 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49434 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
49435 Author: Kim Phillips <kim.phillips@freescale.com>
49436 Date: Fri Aug 10 13:28:25 2007 -0500
49438 README: Remove outdated cpu type, board type, and NAME_config lists
49440 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49442 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
49443 Author: Dave Liu <r63238@freescale.com>
49444 Date: Fri Aug 10 15:48:59 2007 +0800
49446 mpc83xx: Suppress the warning 'burstlen'
49448 suppress the warning 'burstlen' of spd_sdram.
49450 Signed-off-by: Dave Liu <daveliu@freescale.com>
49452 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
49453 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
49454 Date: Thu Aug 9 15:11:03 2007 -0500
49456 Add support for SBC8641D. Config files.
49458 Add support for Wind River's SBC8641D reference board.
49460 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
49461 Acked-by: Wolfgang Denk <wd@denx.de>
49462 Acked-by: Jon Loeliger <jdl@freescale.com>
49464 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
49465 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
49466 Date: Thu Aug 9 15:10:53 2007 -0500
49468 Add support for SBC8641D. Board files.
49470 Add support for Wind River's SBC8641D reference board.
49472 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
49473 Acked-by: Wolfgang Denk <wd@denx.de>
49474 Acked-by: Jon Loeliger <jdl@freescale.com>
49476 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
49477 Author: Stefan Roese <sr@denx.de>
49478 Date: Fri Aug 10 20:34:58 2007 +0200
49480 Conding style cleanup
49482 Signed-off-by: Stefan Roese <sr@denx.de>
49484 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
49485 Author: Sergey Kubushyn <ksi@koi8.net>
49486 Date: Fri Aug 10 20:26:18 2007 +0200
49488 [ARM] TI DaVinci support, hopefully final
49490 Add support for the following DaVinci boards:
49497 - Split into separate board directories
49498 - Removed changes to MTD_DEBUG (or whatever it's called)
49499 - New CONFIG_CMD party line followed
49500 - Some cosmetic fixes, cleanup etc.
49501 - Patches against the latest U-Boot tree as of now.
49502 - Fixed CONFIG_CMD_NET in net files.
49503 - Fixed CONFIG_CMD_EEPROM for schmoogie.
49504 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
49505 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
49506 but it at least compiles.
49508 Here is an excerpt from session log on SCHMOOGIE...
49510 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
49519 ETH PHY : DP83848 @ 0x01
49521 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
49522 U-Boot > ping 192.168.253.10
49523 host 192.168.253.10 is alive
49526 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
49527 Acked-by: Dirk Behme <dirk.behme@gmail.com>
49528 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
49529 Acked-by: Stefan Roese <sr@denx.de>
49531 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
49532 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49533 Date: Fri Jul 27 01:50:45 2007 -0500
49535 fsl_pci_init cleanup.
49537 Do not enable normal errors created during probe (master abort, perr,
49538 and pcie Invalid Configuration access).
49540 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
49542 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49543 Acked-by: Andy Fleming <afleming@freescale.com>
49545 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
49546 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
49547 Date: Fri Jul 27 01:50:44 2007 -0500
49549 pciauto_setup_device bars_num fix
49551 Passing bars_num=0 to pciauto_setup_device should assign no bars.
49553 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49554 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
49555 Acked-by: Andy Fleming <afleming@freescale.com>
49557 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
49558 Author: Jon Loeliger <jdl@freescale.com>
49559 Date: Mon Aug 6 17:39:44 2007 -0500
49561 8641hpcn: Do correct sized pointer math.
49563 When I rebased Ed's patch and cleaned up a few compilation
49564 problems, I apparently rebased my brain on crack first.
49565 Fix that by doing (char *) sized pointer math as needed.
49567 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49569 commit cfc7a7f5bb3273c9951173c788001d45118f141f
49570 Author: Jon Loeliger <jdl@freescale.com>
49571 Date: Thu Aug 2 14:42:20 2007 -0500
49575 Remove rev 1 fixes.
49576 Always set PICGCR_MODE.
49577 Enable machine check and provide board config option
49578 to set and handle SoC error interrupts.
49580 Include MSSSR0 in error message.
49582 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
49584 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
49585 Signed-off-by: Jon Loeliger <jdl@freescale.com>
49587 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
49588 Author: Stefan Roese <sr@denx.de>
49589 Date: Fri Aug 10 10:42:25 2007 +0200
49591 Coding style cleanup
49593 Signed-off-by: Stefan Roese <sr@denx.de>
49595 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
49596 Author: Dirk Behme <dirk.behme@googlemail.com>
49597 Date: Thu Aug 2 17:42:08 2007 +0200
49599 Make use of generic 64bit division in nand_util.c
49601 Use generic 64bit division in nand_util.c. This makes nand_util.c
49602 independent of any toolchain 64bit division.
49604 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
49606 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
49607 Author: Dirk Behme <dirk.behme@googlemail.com>
49608 Date: Thu Aug 2 17:41:14 2007 +0200
49610 Move 64bit division from avr32 to generic lib
49612 Move the 64bit division from lib_avr32 to lib_generic. With this, all
49613 boards can do_div/__div64_32 if needed, not only avr one. Code is put
49614 to lib_generic, so no larger memory footprint if not used. No code
49615 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
49617 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
49619 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
49620 Author: Niklaus Giger <niklausgiger@gmx.ch>
49621 Date: Fri Jul 27 11:31:22 2007 +0200
49623 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
49625 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49627 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
49628 Author: Niklaus Giger <niklausgiger@gmx.ch>
49629 Date: Fri Jul 27 11:30:33 2007 +0200
49631 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
49633 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49635 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
49636 Author: Niklaus Giger <niklausgiger@gmx.ch>
49637 Date: Fri Jul 27 11:38:26 2007 +0200
49639 Add PPC4xx-HCU4 and HCU5 boards: common files
49641 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49643 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
49644 Author: Niklaus Giger <niklausgiger@gmx.ch>
49645 Date: Fri Jul 27 11:28:44 2007 +0200
49647 Add PPC4xx-HCU4 and HCU5 boards: make related
49649 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49651 commit 137fdd9f474ecb853efdace5200576308c67f18d
49652 Author: Niklaus Giger <niklausgiger@gmx.ch>
49653 Date: Fri Jul 27 11:28:03 2007 +0200
49655 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
49657 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49659 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
49660 Author: Niklaus Giger <niklausgiger@gmx.ch>
49661 Date: Fri Jul 27 11:27:15 2007 +0200
49663 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
49665 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49667 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
49668 Author: Niklaus Giger <niklausgiger@gmx.ch>
49669 Date: Fri Jul 27 11:25:31 2007 +0200
49671 Add PPC4xx-HCU4 and HCU5 boards: READMEs
49673 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49675 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
49676 Author: Niklaus Giger <niklausgiger@gmx.ch>
49677 Date: Fri Jul 27 11:37:40 2007 +0200
49679 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
49681 This series of patches adds support for 2 boards from Netstal Maschinen.
49683 The HCU4 has a PPC405Gpr and
49684 the HCU5 has a PPC440EPX.
49686 The HCU4 has a somehow complicated flash setup, as the booteprom is
49687 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
49690 The HCU5 has only a booteprom as the whole code will be downloaded from a
49691 different board which has HD, CD-ROM, etc and where all code is stored.
49693 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
49696 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
49698 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
49699 Author: Stefan Roese <sr@denx.de>
49700 Date: Fri Aug 10 08:42:55 2007 +0200
49702 ppc4xx: Update lwmon5 POST configuration
49704 Signed-off-by: Stefan Roese <sr@denx.de>
49706 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
49707 Author: Yuri Tikhonov <yur@emcraft.com>
49708 Date: Fri Aug 10 08:25:22 2007 +0200
49710 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
49712 The patch adds support for UART POST on ppc44x-based boards with no
49713 external serial clocks installed.
49715 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
49716 Acked-by: Stefan Roese <sr@denx.de>
49718 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
49719 Author: Kim Phillips <kim.phillips@freescale.com>
49720 Date: Mon Aug 6 18:18:34 2007 -0500
49722 mpc83xx: fix ITX[GP] O=builddir builds
49724 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
49726 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
49727 "BUILD_DIR=<some dir> ./MAKEALL ..."
49729 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49731 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
49732 Author: Dave Liu <r63238@freescale.com>
49733 Date: Wed Aug 1 15:00:59 2007 +0800
49735 mpc83xx: Correct the README for DDR ECC
49737 Update the README for DDR ECC, change the name
49738 to README.mpc83xx.ddrecc.
49740 Signed-off-by: Dave Liu <daveliu@freescale.com>
49741 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49743 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
49744 Author: Dave Liu <r63238@freescale.com>
49745 Date: Wed Aug 1 15:00:15 2007 +0800
49747 mpc83xx: Consolidate the ECC support of 83xx
49749 Remove the duplicated source code of ecc command on the <board>.c,
49750 for reused, move these code to cpu/mpc83xx directory.
49752 Signed-off-by: Dave Liu <daveliu@freescale.com>
49753 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49755 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
49756 Author: Dave Liu <r63238@freescale.com>
49757 Date: Sat Aug 4 13:37:39 2007 +0800
49759 mpc83xx: Correct the burst length for DDR2 with 32 bits
49761 The burst length should be 4 for DDR2 with 32 bits bus
49763 Signed-off-by: Dave Liu <daveliu@freescale.com>
49765 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
49766 Author: Kim Phillips <kim.phillips@freescale.com>
49767 Date: Wed Jul 25 19:25:33 2007 -0500
49769 mpc83xx: add support for the MPC8323E RDB
49771 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
49772 five 10/100 ethernet ports connected via an ICPlus IP175C
49773 switch, one PCI slot, and serial. Features not supported
49774 in this patch are SD card interface, 2 USB ports, and the
49777 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
49778 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49780 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
49781 Author: Kim Phillips <kim.phillips@freescale.com>
49782 Date: Wed Jul 25 19:25:28 2007 -0500
49784 mpc83xx: fixup generic pci for libfdt
49786 add libfdt support to the generic 83xx pci code
49788 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49790 commit f57ac7a7b37109245b69db80839ebee26179966a
49791 Author: Kim Phillips <kim.phillips@freescale.com>
49792 Date: Wed Jul 25 19:25:22 2007 -0500
49794 mpc83xx: fix 8360 and cpu functions to update fdt being passed
49796 ..and not the global fdt. Rename local fdt vars to blob so as not to
49797 be confused with the global var with the same three-letter name.
49799 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49801 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
49802 Author: Jerry Van Baren <gvb.uboot@gmail.com>
49803 Date: Wed Jul 4 21:34:24 2007 -0400
49805 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
49807 Several node strings were not correct (trailing slashes and properties
49809 Added setting of the timebase-frequency.
49810 Improved error messages and use debug() instead of printf().
49812 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
49813 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49815 commit 26d02c9bbac1751c5e19294f000100b48d43a920
49816 Author: Jerry Van Baren <gvb.uboot@gmail.com>
49817 Date: Wed Jul 4 21:27:30 2007 -0400
49819 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
49821 The new name matches more closely the kernel's name, which is also
49822 a much better description.
49824 These are the mpc83xx changes made necessary by the function name change.
49826 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
49827 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
49828 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49830 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
49831 Author: Dave Liu <daveliu@freescale.com>
49832 Date: Mon Jun 25 10:41:56 2007 +0800
49834 mpc83xx: Add support for the display of reset status
49836 83xx processor family has many reset sources, such as
49837 power on reset, software hard reset, software soft reset,
49838 JTAG, bus monitor, software watchdog, check stop reset,
49839 external hard reset, external software reset.
49840 sometimes, to figure out the fault of system, we need to
49841 know the cause of reset early before the prompt of
49844 Signed-off-by: Dave Liu <daveliu@freescale.com>
49845 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49847 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
49848 Author: Dave Liu <daveliu@freescale.com>
49849 Date: Mon Jun 25 10:41:04 2007 +0800
49851 mpc83xx: Fix the align bug of SDMA buffer
49853 According to the latest user manual, the SDMA temporary
49854 buffer base address must be 4KB aligned.
49856 Signed-off-by: Dave Liu <daveliu@freescale.com>
49857 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49859 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
49860 Author: Dave Liu <daveliu@freescale.com>
49861 Date: Mon Jun 25 13:21:12 2007 +0800
49863 mpc83xx: Revise the MPC8360EMDS readme doc
49865 When the rev2.x silicon mount on the MPC8360EMDS baord,
49866 and if you are using the u-boot version after the commit
49867 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
49868 to make the ethernet interface usable, we have to setup
49869 the jumpers correctly.
49871 Signed-off-by: Dave Liu <daveliu@freescale.com>
49872 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49874 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
49875 Author: Timur Tabi <timur@freescale.com>
49876 Date: Tue Jul 3 13:46:32 2007 -0500
49878 FSL I2C driver programs the two I2C busses differently
49880 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
49881 The second I2C bus has its slave address programmed incorrectly and is
49882 missing a 5-us delay.
49884 Signed-off-by: Timur Tabi <timur@freescale.com>
49885 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49887 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
49888 Author: Timur Tabi <timur@freescale.com>
49889 Date: Tue Jul 3 13:04:34 2007 -0500
49891 Update SCCR programming in cpu_init_f() to support all 83xx processors
49893 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
49894 bitfields for all 83xx processors. The code to update some bitfields was
49895 compiled only on some processors. Now, the bitfields are programmed as long
49896 as the corresponding CFG_SCCR option is defined in the board header file.
49897 This means that the board header file should not define any CFG_SCCR macros
49898 for bitfields that don't exist on that processor, otherwise the SCCR will be
49899 programmed incorrectly.
49901 Signed-off-by: Timur Tabi <timur@freescale.com>
49902 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49904 commit 9546266999f0b9b51372636614211b88d90f0f25
49905 Author: Martin Krause <martin.krause@tqs.de>
49906 Date: Fri Jun 22 13:04:22 2007 +0200
49908 TQM834x: cleanup configuraton
49910 Remove irritating #undef DEBUG
49912 Signed-off-by: Martin Krause <martin.krause@tqs.de>
49913 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49915 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
49916 Author: david.saada <David.Saada@ecitele.com>
49917 Date: Mon Jun 18 09:09:53 2007 -0700
49919 MPC83xx: Fix makefile to generate config.h file in the build directory
49921 MPC83xx: Fix the Makefile config sections to generate the include/config.h
49922 file in the build directory instead of the source directory.
49924 Signed-off-by: David Saada <david.saada@ecitele.com>
49925 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49927 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
49928 Author: Lee Nipper <Lee.Nipper@freescale.com>
49929 Date: Thu Jun 14 20:07:33 2007 -0500
49931 mpc83xx: Add support for 8360 silicon revision 2.1
49933 This change adds 8360 silicon revision 2.1 support to u-boot.
49935 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
49936 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49938 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
49939 Author: Kumar Gala <galak@kernel.crashing.org>
49940 Date: Wed Aug 8 04:14:28 2007 -0500
49942 Treat ppc64 host as ppc
49944 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
49946 commit 0dc4279b08ff82472bec2e2c90858602459febe8
49947 Author: Jason Jin <Jason.jin@freescale.com>
49948 Date: Wed Aug 8 09:01:46 2007 +0800
49950 Minor fix for bios emulator makefile
49952 Add $(obj) to LIB avoiding objects be built in the source dir
49954 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
49956 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
49957 Author: Jason Jin <Jason.jin@freescale.com>
49958 Date: Wed Aug 8 08:33:11 2007 +0800
49960 Add CONFIG_BIOSEMU define to guard all the bios emulator code
49962 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
49964 This patch fix the compile issue on the board that did not enable the bios emulator
49966 commit ed8106433522f2ea8933e9808346860d061d7731
49967 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
49968 Date: Tue Jul 31 12:27:25 2007 -0500
49970 tsec: fix multiple PHY support
49972 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
49973 broke multiple PHY support in tsec.c. This fixes it.
49975 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
49976 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
49978 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
49979 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
49980 Date: Thu Aug 9 09:08:18 2007 -0500
49982 tsec: Allow Ten Bit Interface address to be configurable
49984 Allow the address of the Ten Bit Interface (TBI) to be changed in the
49985 event of a conflict with another device.
49987 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
49989 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
49990 Author: Stefan Roese <sr@denx.de>
49991 Date: Wed Aug 8 09:54:26 2007 +0200
49993 Coding style cleanup
49995 Signed-off-by: Stefan Roese <sr@denx.de>
49997 commit a41de1f0d373e09c782dea558385a06247111ba5
49998 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
49999 Date: Sun Aug 5 05:15:18 2007 -0500
50001 Port enabled for I2C signals and chipselects port configuration.
50003 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50005 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
50006 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50007 Date: Sun Aug 5 04:31:18 2007 -0500
50011 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50013 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
50014 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50015 Date: Sun Aug 5 04:11:20 2007 -0500
50019 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50021 commit 99c03c175d2689093176facf17c58ce2cb320001
50022 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50023 Date: Sun Aug 5 03:58:52 2007 -0500
50025 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
50027 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50029 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
50030 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50031 Date: Sun Aug 5 03:55:21 2007 -0500
50033 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
50035 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50037 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
50038 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50039 Date: Sun Aug 5 03:43:30 2007 -0500
50041 Moved sync() from board file to include/asm-m68k/io.h
50043 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50045 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
50046 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50047 Date: Sun Aug 5 03:30:44 2007 -0500
50049 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
50051 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50053 commit 9998bd37ead85e93953559720710d3b0685c81e6
50054 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50055 Date: Sun Aug 5 03:19:10 2007 -0500
50057 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
50059 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50061 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
50062 Author: Jason Jin <Jason.jin@freescale.com>
50063 Date: Tue Aug 7 16:17:06 2007 +0800
50065 Add CONFIG_BIOSEMU define to guard all the bios emulator code
50067 This patch fix the compile issue on the board that did not enable the bios emulator
50069 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
50070 Author: Wolfgang Denk <wd@denx.de>
50071 Date: Tue Aug 7 16:02:13 2007 +0200
50073 Fix missing brace error in fs/fat/fat.c
50074 [pointed out by Roderik Wildenburg]
50076 Signed-off-by: Wolfgang Denk <wd@denx.de>
50078 commit 706714d97a0d08d59eda4de2268c39f504688329
50079 Author: Michal Simek <monstr@monstr.eu>
50080 Date: Mon Aug 6 23:41:53 2007 +0200
50082 [FIX] remove cute code
50084 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
50085 Author: Michal Simek <monstr@monstr.eu>
50086 Date: Mon Aug 6 23:35:26 2007 +0200
50088 [FIX] Fix romfs code
50090 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
50091 Author: Michal Simek <monstr@monstr.eu>
50092 Date: Mon Aug 6 23:31:49 2007 +0200
50094 [FIX] Coding style cleanup - Wolfgang's suggestions
50096 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
50097 Author: Wolfgang Denk <wd@denx.de>
50098 Date: Mon Aug 6 23:21:05 2007 +0200
50100 Fixed typo in README (pointed out by Martin Jost).
50102 Signed-off-by: Wolfgang Denk <wd@denx.de>
50104 commit 537223afa61f64480df31ce440a9cb386df4a814
50105 Author: Stefan Roese <sr@denx.de>
50106 Date: Mon Aug 6 21:10:17 2007 +0200
50108 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
50110 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
50111 here an updated Bamboo README.
50113 Signed-off-by: Stefan Roese <sr@denx.de>
50115 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
50116 Author: Wolfgang Denk <wd@denx.de>
50117 Date: Mon Aug 6 02:17:36 2007 +0200
50119 Coding style cleanup. Update CHANGELOG.
50121 Signed-off-by: Wolfgang Denk <wd@denx.de>
50123 commit 221838cc7eb178370ff62aa05920a582e12ac322
50124 Author: Jason Jin <Jason.jin@freescale.com>
50125 Date: Tue Jul 10 09:03:22 2007 +0800
50127 Remove the bios emulator from MAI board.
50129 The bios emulator in the MAI board can not pass compile
50130 and have a lot of crap in it. remove it and will have a
50131 clean and small bios emulator in the drivers directory
50132 which can be uesed for every board.
50134 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50136 commit 5618332409bb96f4448d1712899369fc80c0b489
50137 Author: Jason Jin <Jason.jin@freescale.com>
50138 Date: Fri Jul 13 12:14:59 2007 +0800
50140 Fix some compile issues for MAI board.
50142 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50144 commit 0f460a1ee148b648ee242c3157650287d4296260
50145 Author: Jason Jin <Jason.jin@freescale.com>
50146 Date: Fri Jul 13 12:14:58 2007 +0800
50148 Configurations for ATI video card BIOS emulator
50150 This patch add definition of the BIOS emulator and the ATI framebuffer
50151 driver for MPC8641HPCN board.
50153 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50154 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
50156 commit ece92f85053b8df613edcf05b26a416cbc3d629c
50157 Author: Jason Jin <Jason.jin@freescale.com>
50158 Date: Fri Jul 6 08:34:56 2007 +0800
50160 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
50161 ATI video card BIOS. and can be used for x86 code emulation by some
50164 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50166 commit 5072188acabde3178fac7f5a597150e6e74fd40c
50167 Author: Jason Jin <Jason.jin@freescale.com>
50168 Date: Fri Jul 6 08:33:33 2007 +0800
50170 This is a framebuffer driver for ATI video card, can work for PCI9200,
50171 X300, X700, X800 ATI video cards.
50173 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
50174 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
50176 commit 5728be389e65fd47f34b33c2596271eb4db751ae
50177 Author: Wolfgang Denk <wd@denx.de>
50178 Date: Mon Aug 6 01:01:49 2007 +0200
50180 Coding style cleanup. Update CHANGELOG.
50182 Signed-off-by: Wolfgang Denk <wd@denx.de>
50184 commit 8092fef4c29b395958bb649647da7e3775731517
50185 Author: Martin Krause <Martin.Krause@tqs.de>
50186 Date: Tue Dec 12 14:26:01 2006 +0100
50188 Add functions to list of exported functions
50190 Additionally export the following fuctions (to make trab_config build again):
50194 Also bump the ABI version to reflect this change
50196 Signed-off-by: Martin Krause <martin.krause@tqs.de>
50198 commit 63cec5814fab5d2b1c86982327433807a5ac0249
50199 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50200 Date: Thu Aug 2 14:09:49 2007 -0500
50202 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
50204 All of the PCI/PCI-Express driver and initialization code that
50205 was in the MPC8641HPCN port has now been moved into the common
50206 drivers/fsl_pci_init.c. In a subsequent patch, this will be
50207 utilized by the 85xx ports as well.
50209 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
50211 Also enable the second PCI-Express controller on 8641
50212 by getting its BATS and CFG_ setup right.
50214 Fixed a u16 vendor compiler warning in AHCI driver too.
50216 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50217 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
50218 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50220 commit a274ca4f6d68830e7c916f897561cff8c4101c38
50221 Author: Michal Simek <monstr@monstr.eu>
50222 Date: Sun Aug 5 22:33:05 2007 +0200
50224 [FIX] Coding style cleanup
50226 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
50227 Author: Michal Simek <monstr@monstr.eu>
50228 Date: Sun Aug 5 16:13:31 2007 +0200
50230 [FIX] Xilinx Uartlite driver
50231 Because PPC405 can use UARTLITE serial interface and
50232 Microblaze can use Uart16550 serial interface not only Uartlite.
50234 commit 98889edd50aadf862071eb5664747ad0d568a20e
50235 Author: Michal Simek <monstr@monstr.eu>
50236 Date: Sun Aug 5 15:54:53 2007 +0200
50238 [FIX] Change configuration for XUPV2P Microblaze board
50240 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
50241 Author: Michal Simek <monstr@monstr.eu>
50242 Date: Sun Aug 5 15:53:50 2007 +0200
50244 [PATCH] Added support for Xilinx Emac community driver
50246 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
50247 Author: Bartlomiej Sieka <tur@semihalf.com>
50248 Date: Fri Aug 3 12:08:16 2007 +0200
50250 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
50252 Add the ability for modules from the Schindler cm5200 family to use a
50253 single U-Boot image:
50254 - rename cm1_qp1 to cm5200
50255 - add run-time module detection
50256 - parametrize SDRAM configuration according to the module we are running on
50258 Few minor, board-specific fixes included in this patch:
50259 - better MAC address handling
50260 - updated default environment ('update' command uses +{filesize} now)
50261 - improved error messages in the auto-update code
50262 - allow booting U-Boot from RAM (CFG_RAMBOOT)
50264 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
50265 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
50266 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
50268 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
50269 Author: Andy Fleming <afleming@freescale.com>
50270 Date: Fri Aug 3 04:05:25 2007 -0500
50272 Add Marvell 1149 PHY support to the TSEC
50274 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
50275 Author: Wolfgang Denk <wd@denx.de>
50276 Date: Thu Aug 2 21:27:46 2007 +0200
50278 Coding style cleanup, update CHANGELOG
50280 Signed-off-by: Wolfgang Denk <wd@denx.de>
50282 commit 63e22764d2f8653f68888c667eb65b3996b52680
50283 Author: Wolfgang Denk <wd@denx.de>
50284 Date: Thu Aug 2 10:11:18 2007 +0200
50286 Minor cleanup of <board>_nand build rules.
50288 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
50289 Author: Stefan Roese <sr@denx.de>
50290 Date: Thu Aug 2 08:33:56 2007 +0200
50292 ppc4xx: Code cleanup
50294 Signed-off-by: Stefan Roese <sr@denx.de>
50296 commit c92409812206ac67a7fa7aae298539a9c3804a46
50297 Author: Grzegorz Bernacki <gjb@semihalf.com>
50298 Date: Tue Jul 31 18:51:48 2007 +0200
50300 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
50302 During config transactions on the PCIe bus an attempt to scan for a
50303 non-existent device can lead to a machine check exception with certain
50304 peripheral devices. In order to avoid crashing in such scenarios the
50305 instrumented versions of the config cycle read routines are introduced, so
50306 the exceptions fixups framework can gracefully recover.
50308 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
50309 Acked-by: Rafal Jaworowski <raj@semihalf.com>
50311 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
50312 Author: Rafal Jaworowski <raj@semihalf.com>
50313 Date: Tue Jul 31 18:19:54 2007 +0200
50315 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
50317 This brings back separate settings for PCIe bus numbers depending on chip
50318 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
50319 commit. 440SPe rev. A does NOT work properly with the same settings as for
50320 the rev. B (no devices are seen on the bus during enumeration).
50322 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
50324 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
50325 Author: Wolfgang Denk <wd@denx.de>
50326 Date: Thu Aug 2 00:48:45 2007 +0200
50328 Fix build errors and warnings / code cleanup.
50330 Signed-off-by: Wolfgang Denk <wd@denx.de>
50332 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
50333 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
50334 Date: Tue Jul 31 10:24:56 2007 +0200
50336 ppc4xx: Update AMCC Bamboo 440EP support
50338 Changed storage type of cfg_simulate_spd_eeprom to const
50339 Changed storage type of gpio_tab to stack storage
50340 (Cannot access global data declarations in .bss until afer code relocation)
50342 Improved SDRAM tests to catch problems where data is not uniquely addressable
50343 (e.g. incorrectly programmed SDRAM row or columns)
50345 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
50346 Fixed AM29LV320DT (OpCode Flash) sector map
50348 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
50349 Signed-off-by: Stefan Roese <sr@denx.de>
50351 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
50352 Author: Stefan Roese <sr@denx.de>
50353 Date: Tue Jul 31 08:37:01 2007 +0200
50355 ppc4xx: Update 440EPx lwmon5 board support
50357 - Clear ECC status regs after ECC POST test
50358 - Set dcbz for ECC generation with caches enabled as default
50361 Signed-off-by: Stefan Roese <sr@denx.de>
50363 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
50364 Author: Stefan Roese <sr@denx.de>
50365 Date: Mon Jul 30 11:04:57 2007 +0200
50367 ppc4xx: Only print ECC related info when the error bis are set
50369 Signed-off-by: Stefan Roese <sr@denx.de>
50371 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
50372 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
50373 Date: Fri Jul 27 16:44:31 2007 +0200
50375 new FPGA image for PLU405 board
50377 new FPGA image for PLU405 board with improved CompactFlash timing
50379 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
50381 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
50382 Author: Rafal Jaworowski <raj@semihalf.com>
50383 Date: Fri Jul 27 14:43:59 2007 +0200
50385 [ADS5121] Support for the ADS5121 board
50387 The following MPC5121e subsystems are supported:
50389 - low-level CPU init
50390 - NOR Boot Flash (common CFI driver)
50396 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
50397 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
50398 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
50400 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
50401 Author: Rafal Jaworowski <raj@semihalf.com>
50402 Date: Fri Jul 27 14:22:04 2007 +0200
50404 [PPC] Remove unused MSR_USER definition
50406 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
50408 commit d4024bb72dd81695ec099b2199eda0d27c623e62
50409 Author: John Otken <john@softadvances.com>
50410 Date: Thu Jul 26 17:49:11 2007 +0200
50412 ppc4xx: Add support for AMCC 405EP Taihu board
50414 Signed-off-by: John Otken <john@softadvances.com>
50416 commit b66091de6c7390620312c2501db23d8391e7cabb
50417 Author: Anatolij Gustschin <agust@denx.de>
50418 Date: Thu Jul 26 15:08:01 2007 +0200
50420 ppc4xx: lwmon5: Update Lime initialization
50422 Change Lime SDRAM initialization to now support 100MHz and
50423 133MHz (if enabled). Also the framebuffer is initialized to
50424 display a blue rectangle with a white border.
50426 Signed-off-by: Anatolij Gustschin <agust@denx.de>
50427 Signed-off-by: Stefan Roese <sr@denx.de>
50429 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
50430 Author: Stefan Roese <sr@denx.de>
50431 Date: Tue Jul 24 09:52:52 2007 +0200
50433 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
50435 The used Intel NOR FLASH chips have internally two dies, and are now
50436 treated as two seperate chips.
50438 Signed-off-by: Stefan Roese <sr@denx.de>
50440 commit aedf5bde179ecfbd0a96130d18996a96518b785f
50441 Author: Stefan Roese <sr@denx.de>
50442 Date: Tue Jul 24 07:20:09 2007 +0200
50444 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
50446 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
50447 interrupt controller.
50449 Signed-off-by: Stefan Roese <sr@denx.de>
50451 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
50452 Author: Stefan Roese <sr@denx.de>
50453 Date: Fri Jul 20 15:03:44 2007 +0200
50455 ppc4xx: Fix bug with default GPIO output value
50457 As spotted by Matthias Fuchs, the default output values for all GPIO1
50458 outputs were not setup correctly. This patch fixes this issue.
50460 Signed-off-by: Stefan Roese <sr@denx.de>
50462 commit 531e3e8b831f357056448fa573137d5fb37000fd
50463 Author: Pavel Kolesnikov <concord@emcraft.com>
50464 Date: Fri Jul 20 15:03:03 2007 +0200
50466 POST: Add ECC POST for the lwmon5 board
50468 This patch adds ECC Post test for the Lwmon5 board based
50469 on PPC440EPx to U-Boot.
50471 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
50472 Acked-by: Yuri Tikhonov <yur@emcraft.com>
50473 Acked-by: Stefan Roese <sr@denx.de>
50475 commit cc3023b9f95d7ac959a764471a65001062aecf41
50476 Author: Rafal Jaworowski <raj@semihalf.com>
50477 Date: Thu Jul 19 17:12:28 2007 +0200
50479 Fix breakage of 8xx boards from recent commit.
50481 This patch fixes the negative consequences for 8xx of the recent
50482 "ppc4xx: Clean up 440 exceptions handling" commit.
50484 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
50486 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
50487 Author: Stefan Roese <sr@denx.de>
50488 Date: Mon Jul 16 13:11:12 2007 +0200
50490 Coding style cleanup
50492 Signed-off-by: Stefan Roese <sr@denx.de>
50494 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
50495 Author: Stefan Roese <sr@denx.de>
50496 Date: Mon Jul 16 10:02:12 2007 +0200
50498 ppc4xx: Code cleanup
50500 Signed-off-by: Stefan Roese <sr@denx.de>
50502 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
50503 Author: Stefan Roese <sr@denx.de>
50504 Date: Mon Jul 16 10:01:38 2007 +0200
50506 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
50508 Signed-off-by: Stefan Roese <sr@denx.de>
50510 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
50511 Author: Stefan Roese <sr@denx.de>
50512 Date: Mon Jul 16 10:00:43 2007 +0200
50514 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
50516 The new boardspecific DDR2 controller configuration is used for the Yucca
50517 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
50519 Signed-off-by: Stefan Roese <sr@denx.de>
50521 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
50522 Author: Stefan Roese <sr@denx.de>
50523 Date: Mon Jul 16 09:57:00 2007 +0200
50525 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
50527 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
50528 support non default, boardspecific DDR(2) controller configuration.
50530 Signed-off-by: Stefan Roese <sr@denx.de>
50532 commit 5743a9207a370b90f09b20ebd61167c806b937f3
50533 Author: Stefan Roese <sr@denx.de>
50534 Date: Mon Jul 16 08:53:51 2007 +0200
50536 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
50538 The new function remove_tlb() can be used to remove the TLB's used to
50539 map a specific memory region. This is especially useful for the DDR(2)
50540 setup routines which configure the SDRAM area temporarily as a cached
50541 area (for speedup on auto-calibration and ECC generation) and later
50542 need this area uncached for normal usage.
50544 Signed-off-by: Stefan Roese <sr@denx.de>
50546 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
50547 Author: Michal Simek <monstr@monstr.eu>
50548 Date: Mon Jul 16 00:31:07 2007 +0200
50550 [PATCH] Support for Xilinx EmacLite controller
50552 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
50553 Author: Wolfgang Denk <wd@denx.de>
50554 Date: Sat Jul 14 22:51:02 2007 +0200
50558 Signed-off-by: Wolfgang Denk <wd@denx.de>
50560 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
50561 Author: Michal Simek <monstr@monstr.eu>
50562 Date: Sat Jul 14 13:11:28 2007 +0200
50564 [FIX] support for simply measuring time
50566 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
50567 Author: Michal Simek <monstr@monstr.eu>
50568 Date: Sat Jul 14 12:41:23 2007 +0200
50570 [FS] Added support for ROMFS
50572 commit 011595307731a7a67a7445d107c279d031e8ab97
50573 Author: Heiko Schocher <hs@pollux.denx.de>
50574 Date: Sat Jul 14 01:06:58 2007 +0200
50576 [PCS440EP] - fix compile error, if BUILD_DIR is used
50578 commit 5a2f1098d81ad58b309e5e558d0492643166a799
50579 Author: Michal Simek <monstr@monstr.eu>
50580 Date: Sat Jul 14 00:18:48 2007 +0200
50582 [PATCH] Support time without timer
50584 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
50585 Author: Michal Simek <monstr@monstr.eu>
50586 Date: Fri Jul 13 21:43:55 2007 +0200
50588 [PATCH] Remove problem with disabled BARREL SHIFTER
50590 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
50591 Author: Michal Simek <monstr@monstr.eu>
50592 Date: Fri Jul 13 21:41:44 2007 +0200
50594 [FIX] correct help for rspr
50596 commit fad63407154f46246ce80d53a9c669a44362ac67
50597 Author: Heiko Schocher <hs@pollux.denx.de>
50598 Date: Fri Jul 13 09:54:17 2007 +0200
50600 make show_boot_progress () weak.
50602 Signed-off-by: Heiko Schocher <hs@denx.de>
50604 commit 907902472391b6ca1876ec300687562ecaf459b1
50605 Author: Heiko Schocher <hs@pollux.denx.de>
50606 Date: Fri Jul 13 08:26:05 2007 +0200
50608 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
50609 - fix compile error, if BUILD_DIR is used
50611 Signed-off-by: Heiko Schocher <hs@denx.de>
50613 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
50614 Author: Stefan Roese <sr@denx.de>
50615 Date: Thu Jul 12 16:32:08 2007 +0200
50617 ppc4xx: Change receive buffer handling in the 4xx emac driver
50619 This change fixes a bug in the receive buffer handling, that
50620 could lead to problems upon high network traffic (broadcasts...).
50622 Signed-off-by: Stefan Roese <sr@denx.de>
50624 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
50625 Author: Wolfgang Denk <wd@denx.de>
50626 Date: Thu Jul 12 01:45:34 2007 +0200
50628 Update CHANGELOG, minor coding style cleanup.
50630 Signed-off-by: Wolfgang Denk <wd@denx.de>
50632 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
50633 Author: Andy Fleming <afleming@freescale.com>
50634 Date: Fri Jun 8 16:41:18 2007 -0500
50636 Remove erroneous errata code from Marvel 88E1111S driver
50638 The Marvel 88E1111S driver for the TSEC was copied from the
50639 88E1101 driver, and included a fix for an erratum which does not
50640 exist on that part. Now it is removed
50642 Signed-off-by: Andy Fleming <afleming@freescale.com>
50644 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
50645 Author: Andy Fleming <afleming@freescale.com>
50646 Date: Tue Jun 5 16:38:44 2007 -0500
50648 From: eran liberty <eran.liberty@gmail.com>
50650 adds the reset register to 85xx immap
50652 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
50653 Signed-off-by: Andy Fleming <afleming@freescale.com>
50655 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
50656 Author: Andy Fleming <afleming@freescale.com>
50657 Date: Thu May 10 17:50:01 2007 -0500
50659 Polished the 85xx ADS config files
50661 Made the boot commands use device trees by default.
50662 Also moved the ramdisk to 1000000 (I think the previous address
50663 was getting overridden during boot).
50665 Signed-off-by: Andy Fleming <afleming@freescale.com>
50667 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
50668 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50669 Date: Wed May 9 11:03:32 2007 -0500
50671 8544ds: Fix Makefile after moving pixis to board/freescale.
50673 The OBJTREE != SRCTREE build scenario was broken.
50676 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50677 Signed-off-by: Jon Loeliger <jdl@freescale.com>
50679 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
50680 Author: Andy Fleming <afleming@freescale.com>
50681 Date: Wed May 9 00:54:20 2007 -0500
50683 tsec: Fix PHY code to match first driver
50685 Jarrold Wen noticed that the generic PHY code always matches
50686 under the current implementation. Change it so the first match
50687 wins, and *only* unknown PHYs trigger the generic driver
50689 Signed-off-by: Andy Fleming <afleming@freescale.com>
50691 commit ccc091aac61a38cd998d575d92f7232e256d6312
50692 Author: Andy Fleming <afleming@freescale.com>
50693 Date: Tue May 8 17:27:43 2007 -0500
50695 Add support for CPM device tree configuration to 8560 ADS
50697 * Adds code to modify CPM frequencies
50698 * Cleans up the config file to #define TSEC and (for now) #undef FCC
50699 * Adds the MII command for all 8560 ADS configurations
50700 * Updates config file to provide convenience commands for booting
50703 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
50704 Signed-off-by: Andy Fleming <afleming@freescale.com>
50706 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
50707 Author: Andy Fleming <afleming@freescale.com>
50708 Date: Tue May 8 17:23:02 2007 -0500
50710 Fix Marvell 88e1145 PHY init code
50712 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
50713 where the reset was being done after the errata code instead of
50716 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
50717 Signed-off-by: Andy Fleming <afleming@freescale.com>
50719 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
50720 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50721 Date: Wed Jul 11 14:52:16 2007 -0500
50723 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
50725 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50727 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
50728 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50729 Date: Wed Jul 11 14:52:08 2007 -0500
50731 pciauto setup bridge
50733 The P2P bridge bus numbers programmed into the device are relative to
50736 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50738 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
50739 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50740 Date: Wed Jul 11 14:52:01 2007 -0500
50742 Support PCIe extended config registers
50744 FSL PCIe block has extended cfg registers in the 100 and 400 range.
50745 For example, to read the LTSSM register: pci display <busn>.0 404 1
50747 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50749 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
50750 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50751 Date: Wed Jul 11 14:51:48 2007 -0500
50753 Minor improvements to drivers/pci_auto.c
50755 - Make pciauto_{pre,post}scan_setup_bridge non-static
50756 - Added physical address display in debug messages.
50758 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50760 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
50761 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
50762 Date: Wed Jul 11 14:51:35 2007 -0500
50764 Start pci hose scan from hose->current_busno.
50766 Ensure hose->current_busno is not less than first_busno. This fixes
50767 broken board code which leaves current_busno=0 when first_busno is
50768 greater than 0 for the cases with multiple controllers.
50770 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
50772 commit 3865b1fb7843a08ad49a6319a36415752276ff48
50773 Author: Stefan Roese <sr@denx.de>
50774 Date: Wed Jul 11 12:13:53 2007 +0200
50776 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
50778 Signed-off-by: Stefan Roese <sr@denx.de>
50780 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
50781 Author: Bartlomiej Sieka <tur@semihalf.com>
50782 Date: Wed Jul 11 20:11:07 2007 +0200
50784 CM1.QP1: Support for the Schindler CM1.QP1 board.
50786 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
50787 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
50789 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
50790 Author: Heiko Schocher <hs@pollux.denx.de>
50791 Date: Wed Jul 11 18:39:11 2007 +0200
50793 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
50794 - now the Flash ST M29W040B is supported (not tested)
50795 - fix the "led" command
50796 - fix compile error, if BUILD_DIR is used
50798 Signed-off-by: Heiko Schocher <hs@denx.de>
50800 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
50801 Author: Stefan Roese <sr@denx.de>
50802 Date: Sun Jul 8 13:44:27 2007 +0200
50804 Fix malloc problem introduced with the relocation fixup for the PPC platform
50806 The relocation fixup didn't handle the malloc pointer initialization
50807 correctly. This patch fixes this problem. Tested successfully on 4xx.
50808 The relocation fixup patches for 4xx will follow soon.
50810 Signed-off-by: Stefan Roese <sr@denx.de>
50812 commit 0dca874db62718e41253659e60f3a1de7eb418ce
50813 Author: TsiChung <tcliew@Goku.(none)>
50814 Date: Tue Jul 10 15:45:43 2007 -0500
50816 Cache update and added CFG_UNIFY_CACHE
50818 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
50820 Signed-off-by: TsiChung <tcliew@Goku.(none)>
50822 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
50823 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50824 Date: Thu Jul 5 23:36:16 2007 -0500
50826 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
50828 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
50830 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50832 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
50833 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50834 Date: Thu Jul 5 23:31:25 2007 -0500
50836 Update header files
50838 Include immap.h and renamed mcfrtc.h to rtc.h
50840 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50842 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
50843 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50844 Date: Thu Jul 5 23:29:21 2007 -0500
50846 Add mcffec_initialize()
50848 Added mcffec_initialize() in eth_initialize()
50850 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50852 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
50853 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50854 Date: Thu Jul 5 23:27:40 2007 -0500
50856 Update header file and clean up
50860 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50862 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
50863 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50864 Date: Thu Jul 5 23:23:15 2007 -0500
50866 New uart structure and defines
50868 Seperated from mcfuart.h
50870 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50872 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
50873 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50874 Date: Thu Jul 5 23:22:31 2007 -0500
50876 New timer structure and defines
50878 Seperated from mcftimer.h
50880 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50882 commit e04acb2eba4782489417240eff76e20e176aec10
50883 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50884 Date: Thu Jul 5 23:21:09 2007 -0500
50886 Rename mcfrtc to rtc
50888 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
50890 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50892 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
50893 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50894 Date: Thu Jul 5 23:17:36 2007 -0500
50896 Rename mcfserial.c. Update include header
50898 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
50900 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50902 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
50903 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50904 Date: Thu Jul 5 23:13:58 2007 -0500
50906 Header file update, clean up and cache handling
50908 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
50910 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50912 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
50913 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50914 Date: Thu Jul 5 23:10:40 2007 -0500
50916 Create interrupts.c and modify Makefile
50918 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
50920 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50922 commit ddd104f1ed655eda50c06ba636237a83ed943f34
50923 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50924 Date: Thu Jul 5 23:06:55 2007 -0500
50928 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50930 commit b9bf3de377b2bae70c983c9b97feae914999e735
50931 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50932 Date: Thu Jul 5 23:05:31 2007 -0500
50934 Update header file and some clean up
50936 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
50938 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50940 commit 84a015b52ec820a5ae173717d78516de731c89c2
50941 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50942 Date: Thu Jul 5 23:03:28 2007 -0500
50944 Update header file and enable icache
50946 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
50948 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50950 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
50951 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50952 Date: Thu Jul 5 23:01:22 2007 -0500
50954 Update header file and removed interrupt_init()
50956 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
50958 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50960 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
50961 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50962 Date: Thu Jul 5 22:57:46 2007 -0500
50964 Update for flash.o and mii.o
50966 Removed flash.o and added mii.o
50968 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50970 commit c5ded275d839e4ff79f41718d50a835d989f57bc
50971 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50972 Date: Thu Jul 5 22:56:19 2007 -0500
50974 MII functions calls.
50976 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50978 commit 427c814104560e29bda14955c67703245aaaa5b4
50979 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50980 Date: Thu Jul 5 22:54:42 2007 -0500
50982 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
50984 The removed MII routines will be placed in mii.c.
50986 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50988 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
50989 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50990 Date: Thu Jul 5 22:51:05 2007 -0500
50994 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
50996 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
50998 commit 2744354a8437b8f78db178e30660215688bff570
50999 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51000 Date: Thu Jul 5 22:46:38 2007 -0500
51002 Seperate old structure defines and new structure defines
51004 Removed new uart structure and defines to uart.h
51006 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51008 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
51009 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51010 Date: Thu Jul 5 22:45:01 2007 -0500
51012 Seperate old structure defines and new structure defines
51014 New timer structure and defines will move to new timer.h
51016 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51018 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
51019 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51020 Date: Thu Jul 5 22:42:23 2007 -0500
51026 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51028 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
51029 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51030 Date: Thu Jul 5 22:41:24 2007 -0500
51034 Replaced whitespace with tabs
51036 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51038 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
51039 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51040 Date: Thu Jul 5 22:39:07 2007 -0500
51042 Create new header file and move peripherals base address from configs file to new header file.
51044 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
51046 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51048 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
51049 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51050 Date: Thu Jul 5 22:24:58 2007 -0500
51054 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
51056 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
51058 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
51059 Author: Jon Loeliger <jdl@freescale.com>
51060 Date: Tue Jul 10 11:19:50 2007 -0500
51062 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
51064 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51065 Those always evaluated TRUE, and thus were always compiled
51066 even when IDE really wasn't defined/wanted.
51068 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51070 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
51071 Author: Jon Loeliger <jdl@freescale.com>
51072 Date: Tue Jul 10 11:13:21 2007 -0500
51074 drivers/: Remove lingering references to CFG_CMD_* symbols.
51076 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51077 Those always evaluated TRUE, and thus were always compiled
51078 even when IDE really wasn't defined/wanted.
51080 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51082 commit f40a7f3e3888b42a43674b099e5470022c8c544c
51083 Author: Jon Loeliger <jdl@freescale.com>
51084 Date: Tue Jul 10 11:07:56 2007 -0500
51086 fs/: Remove lingering references to CFG_CMD_* symbols.
51088 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51089 Those always evaluated TRUE, and thus were always compiled
51090 even when IDE really wasn't defined/wanted.
51092 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51094 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
51095 Author: Jon Loeliger <jdl@freescale.com>
51096 Date: Tue Jul 10 11:05:02 2007 -0500
51098 net/: Remove lingering references to CFG_CMD_* symbols.
51100 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51101 Those always evaluated TRUE, and thus were always compiled
51102 even when IDE really wasn't defined/wanted.
51104 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51106 commit 902531788376046da212afd1661cffb62f3daa1c
51107 Author: Jon Loeliger <jdl@freescale.com>
51108 Date: Tue Jul 10 11:02:44 2007 -0500
51110 common/: Remove lingering references to CFG_CMD_* symbols.
51112 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51113 Those always evaluated TRUE, and thus were always compiled
51114 even when IDE really wasn't defined/wanted.
51116 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51118 commit d39b57415838c73fb0a37eca84de3c68ba990586
51119 Author: Jon Loeliger <jdl@freescale.com>
51120 Date: Tue Jul 10 10:48:22 2007 -0500
51122 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
51124 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51125 Those always evaluated TRUE, and thus were always compiled
51126 even when IDE really wasn't defined/wanted.
51128 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51130 commit 77a318545d57aefa844752465b94c7e09a3f26d0
51131 Author: Jon Loeliger <jdl@freescale.com>
51132 Date: Tue Jul 10 10:39:10 2007 -0500
51134 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
51136 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
51137 Those always evaluated TRUE, and thus were always compiled
51138 even when IDE really wasn't defined/wanted.
51140 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51142 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
51143 Author: Jon Loeliger <jdl@freescale.com>
51144 Date: Tue Jul 10 10:27:39 2007 -0500
51146 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
51148 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51150 commit 079a136c3588814784561d6e4856970ee82d6e2a
51151 Author: Jon Loeliger <jdl@freescale.com>
51152 Date: Tue Jul 10 10:12:10 2007 -0500
51154 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
51156 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
51157 used to be included but CONFIG_BOOTP_MASK was not defined.
51159 Remove lingering references to CFG_CMD_* symbols.
51161 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51163 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
51164 Author: Jon Loeliger <jdl@freescale.com>
51165 Date: Tue Jul 10 09:38:02 2007 -0500
51167 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
51169 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
51170 used to be included but CONFIG_BOOTP_MASK was not defined.
51172 Remove lingering references to CFG_CMD_* symbols.
51174 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51176 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
51177 Author: Jon Loeliger <jdl@freescale.com>
51178 Date: Tue Jul 10 09:29:01 2007 -0500
51180 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
51182 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
51183 used to be included but CONFIG_BOOTP_MASK was not defined.
51185 Remove lingering references to CFG_CMD_* symbols.
51187 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51189 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
51190 Author: Jon Loeliger <jdl@freescale.com>
51191 Date: Tue Jul 10 09:22:23 2007 -0500
51193 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
51195 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
51196 used to be included but CONFIG_BOOTP_MASK was not defined.
51198 Remove lingering references to CFG_CMD_* symbols.
51200 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51202 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
51203 Author: Jon Loeliger <jdl@freescale.com>
51204 Date: Tue Jul 10 09:10:49 2007 -0500
51206 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
51208 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
51209 used to be included but CONFIG_BOOTP_MASK was not defined.
51211 Remove lingering references to CFG_CMD_* symbols.
51213 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51215 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
51216 Author: Jon Loeliger <jdl@freescale.com>
51217 Date: Tue Jul 10 09:02:57 2007 -0500
51219 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
51221 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
51222 used to be included but CONFIG_BOOTP_MASK was not defined.
51224 Remove lingering references to CFG_CMD_* symbols.
51226 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51228 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
51229 Author: Jon Loeliger <jdl@freescale.com>
51230 Date: Mon Jul 9 22:08:34 2007 -0500
51232 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
51234 All of the choices for CONFIG_BOOTP_ are now documented in
51235 the README file. You must now individually select exactly
51236 the set that you want using a series of
51237 #define CONFIG_BOOTP_<x>
51238 statements in the board port config files now.
51240 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51242 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
51243 Author: Jon Loeliger <jdl@freescale.com>
51244 Date: Mon Jul 9 21:57:31 2007 -0500
51246 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
51248 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51250 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
51251 Author: Jon Loeliger <jdl@freescale.com>
51252 Date: Mon Jul 9 21:48:26 2007 -0500
51254 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
51256 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51258 commit 37d4bb70586659dedef1658ce1bed071be098aec
51259 Author: Jon Loeliger <jdl@freescale.com>
51260 Date: Mon Jul 9 21:38:02 2007 -0500
51262 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
51264 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51266 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
51267 Author: Jon Loeliger <jdl@freescale.com>
51268 Date: Mon Jul 9 21:31:24 2007 -0500
51270 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
51272 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51274 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
51275 Author: Jon Loeliger <jdl@freescale.com>
51276 Date: Mon Jul 9 21:24:19 2007 -0500
51278 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
51280 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51282 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
51283 Author: Jon Loeliger <jdl@freescale.com>
51284 Date: Mon Jul 9 21:16:53 2007 -0500
51286 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
51288 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51290 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
51291 Author: Jon Loeliger <jdl@freescale.com>
51292 Date: Mon Jul 9 19:12:30 2007 -0500
51294 Retire CONFIG_COMMANDS finally.
51295 Strip old CFG_CMD_* symbols out.
51297 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51299 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
51300 Author: Jon Loeliger <jdl@freescale.com>
51301 Date: Mon Jul 9 19:10:03 2007 -0500
51303 Update README.* to reference new CONFIG_CMD_* names now.
51305 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51307 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
51308 Author: Jon Loeliger <jdl@freescale.com>
51309 Date: Mon Jul 9 19:06:00 2007 -0500
51311 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
51313 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51315 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
51316 Author: Jon Loeliger <jdl@freescale.com>
51317 Date: Mon Jul 9 18:57:22 2007 -0500
51319 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
51321 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51323 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
51324 Author: Jon Loeliger <jdl@freescale.com>
51325 Date: Mon Jul 9 18:45:16 2007 -0500
51327 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
51329 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51331 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
51332 Author: Jon Loeliger <jdl@freescale.com>
51333 Date: Mon Jul 9 18:38:39 2007 -0500
51335 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
51337 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51339 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
51340 Author: Jon Loeliger <jdl@freescale.com>
51341 Date: Mon Jul 9 18:31:28 2007 -0500
51343 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
51345 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51347 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
51348 Author: Jon Loeliger <jdl@freescale.com>
51349 Date: Mon Jul 9 18:24:55 2007 -0500
51351 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
51353 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51355 commit fcec2eb93e126400009729328e797f12bc94f1fd
51356 Author: Jon Loeliger <jdl@freescale.com>
51357 Date: Mon Jul 9 18:19:09 2007 -0500
51359 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
51361 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51363 commit a593814f2be0c9cdc3133cd550b167b8a988328f
51364 Author: Jon Loeliger <jdl@freescale.com>
51365 Date: Mon Jul 9 18:10:50 2007 -0500
51367 rtc/: Remove obsolete references to CONFIG_COMMANDS
51369 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51371 commit 67350568f9d46e66c21829f3513b3db0caeb948b
51372 Author: Jon Loeliger <jdl@freescale.com>
51373 Date: Mon Jul 9 18:05:38 2007 -0500
51375 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
51377 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51379 commit 7def6b34f910f08d7ef0a14646da067719237ca2
51380 Author: Jon Loeliger <jdl@freescale.com>
51381 Date: Mon Jul 9 18:02:11 2007 -0500
51383 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
51385 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51387 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
51388 Author: Jon Loeliger <jdl@freescale.com>
51389 Date: Mon Jul 9 17:56:50 2007 -0500
51391 fs/: Remove obsolete references to CONFIG_COMMANDS
51393 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51395 commit c91898bbc505aff3e12a807af88e76da18efb7ee
51396 Author: Jon Loeliger <jdl@freescale.com>
51397 Date: Mon Jul 9 17:46:09 2007 -0500
51399 tools/: Remove obsolete references to CONFIG_COMMANDS
51401 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51403 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
51404 Author: Jon Loeliger <jdl@freescale.com>
51405 Date: Mon Jul 9 17:45:14 2007 -0500
51407 net/: Remove obsolete references to CONFIG_COMMANDS
51409 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51411 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
51412 Author: Jon Loeliger <jdl@freescale.com>
51413 Date: Mon Jul 9 17:39:42 2007 -0500
51415 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
51417 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51419 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
51420 Author: Jon Loeliger <jdl@freescale.com>
51421 Date: Mon Jul 9 17:30:01 2007 -0500
51423 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
51425 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51427 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
51428 Author: Jon Loeliger <jdl@freescale.com>
51429 Date: Mon Jul 9 17:22:37 2007 -0500
51431 disk/: Remove obsolete references to CONFIG_COMMANDS
51433 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51435 commit 639221c76c88215bd55af83ad174fc30d1940f8f
51436 Author: Jon Loeliger <jdl@freescale.com>
51437 Date: Mon Jul 9 17:15:49 2007 -0500
51439 include/: Remove obsolete references to CONFIG_COMMANDS
51440 Mostly removed from comments here.
51442 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51444 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
51445 Author: Wolfgang Denk <wd@denx.de>
51446 Date: Tue Jul 10 00:01:28 2007 +0200
51448 Coding style cleanup; update CHANGELOG.
51450 Signed-off-by: Wolfgang Denk <wd@denx.de>
51452 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
51453 Author: Stefan Roese <sr@denx.de>
51454 Date: Mon Jul 9 11:00:24 2007 +0200
51456 Small coding style cleanup
51458 Signed-off-by: Stefan Roese <sr@denx.de>
51460 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
51461 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51462 Date: Mon Jul 9 10:10:08 2007 +0200
51464 Migrate esd 405EP boards to new NAND subsystem
51466 Remove unused CFG_NAND_LEGACY define
51468 These boards to not have NAND.
51470 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51472 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
51473 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51474 Date: Mon Jul 9 10:10:06 2007 +0200
51476 Migrate esd 405EP boards to new NAND subsystem
51478 Migrate esd 405EP boards to new NAND subsystem
51481 -use correct io accessors (in/out_be32())
51483 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51485 commit e09f7ab5749c345f924da272bea0521a73af5b11
51486 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51487 Date: Mon Jul 9 10:10:04 2007 +0200
51489 Migrate esd 405EP boards to new NAND subsystem
51491 This patch prepares the migration from the legacy NAND driver
51492 to U-Boot's new NAND subsystem for esd boards.
51494 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51496 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
51497 Author: Jon Loeliger <jdl@freescale.com>
51498 Date: Sun Jul 8 18:10:08 2007 -0500
51500 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
51502 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51504 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
51505 Author: Jon Loeliger <jdl@freescale.com>
51506 Date: Sun Jul 8 18:05:39 2007 -0500
51508 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
51510 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51512 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
51513 Author: Jon Loeliger <jdl@freescale.com>
51514 Date: Sun Jul 8 18:02:23 2007 -0500
51516 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
51518 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51520 commit baa26db4113679b80970ff447d91cc10217742a6
51521 Author: Jon Loeliger <jdl@freescale.com>
51522 Date: Sun Jul 8 17:51:39 2007 -0500
51524 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
51526 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51528 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
51529 Author: Jon Loeliger <jdl@freescale.com>
51530 Date: Sun Jul 8 17:02:01 2007 -0500
51532 Clear up confusion over the CMD_POST and POST_DIAG mess.
51534 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
51535 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
51536 Clear this mess up some.
51538 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51540 commit b3631487105a57ab7cbadfc26efbaf9676275018
51541 Author: Jon Loeliger <jdl@freescale.com>
51542 Date: Sun Jul 8 15:45:08 2007 -0500
51544 Remove references to the old cmd_confdefs.h include file.
51546 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51548 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
51549 Author: Jon Loeliger <jdl@freescale.com>
51550 Date: Sun Jul 8 15:42:59 2007 -0500
51552 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
51554 Use new CONFIG_CMD_* in lwmon5.h board config file.
51555 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
51557 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51559 commit a5562901661bd428f7e5feb333f796372cb81019
51560 Author: Jon Loeliger <jdl@freescale.com>
51561 Date: Sun Jul 8 15:31:57 2007 -0500
51563 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
51565 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51567 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
51568 Author: Jon Loeliger <jdl@freescale.com>
51569 Date: Sun Jul 8 15:02:44 2007 -0500
51571 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
51573 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51575 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
51576 Author: Jon Loeliger <jdl@freescale.com>
51577 Date: Sun Jul 8 15:12:40 2007 -0500
51579 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
51581 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51583 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
51584 Author: Jon Loeliger <jdl@freescale.com>
51585 Date: Sun Jul 8 14:55:07 2007 -0500
51587 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
51589 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51591 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
51592 Author: Jon Loeliger <jdl@freescale.com>
51593 Date: Sun Jul 8 14:49:44 2007 -0500
51595 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
51597 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51599 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
51600 Author: Jon Loeliger <jdl@freescale.com>
51601 Date: Sun Jul 8 14:21:43 2007 -0500
51603 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
51605 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51607 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
51608 Author: Jon Loeliger <jdl@freescale.com>
51609 Date: Sun Jul 8 14:14:17 2007 -0500
51611 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
51613 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51615 commit 348f258f24253433e4a2302a0bbceb6740a67246
51616 Author: Jon Loeliger <jdl@freescale.com>
51617 Date: Sun Jul 8 13:46:18 2007 -0500
51619 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
51621 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51623 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
51624 Author: Jon Loeliger <jdl@freescale.com>
51625 Date: Sun Jul 8 10:09:35 2007 -0500
51627 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
51629 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51631 commit 60a0876b5106b34220e459c208bbf648073306c0
51632 Author: Jon Loeliger <jdl@freescale.com>
51633 Date: Sat Jul 7 21:04:26 2007 -0500
51635 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
51637 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51639 commit dcaa71562826a2466e894c868d132509dcda8444
51640 Author: Jon Loeliger <jdl@freescale.com>
51641 Date: Sat Jul 7 20:56:05 2007 -0500
51643 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
51645 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51647 commit 3c3227f3c737502311b25b72084573901cbbf17d
51648 Author: Jon Loeliger <jdl@freescale.com>
51649 Date: Sat Jul 7 20:40:43 2007 -0500
51651 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
51653 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51655 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
51656 Author: Jon Loeliger <jdl@freescale.com>
51657 Date: Thu Jul 5 19:52:35 2007 -0500
51659 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
51661 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51663 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
51664 Author: Jon Loeliger <jdl@freescale.com>
51665 Date: Thu Jul 5 19:32:07 2007 -0500
51667 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
51669 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51671 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
51672 Author: Jon Loeliger <jdl@freescale.com>
51673 Date: Thu Jul 5 19:13:52 2007 -0500
51675 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
51677 Since ADS860.h includes "board/fads/fads.h" with ramifications
51678 on the CONFIG_COMMAND treatment, it too has to be adjusted to
51679 exclude already configured commands in this same commit.
51681 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51683 commit 10e038932f22ee80ebd53de312531e70e6590a2f
51684 Author: Thomas Knobloch <knobloch@siemens.com>
51685 Date: Fri Jul 6 14:58:39 2007 +0200
51687 [NAND] Bad block skipping for command nboot
51689 The old implementation of command nboot does not support reading the image from
51690 NAND flash with skipping of bad blocks. The patch implements a new version of
51691 the nboot command: by calling nboot.jffs2 from the u-boot command line the
51692 command will load the image from NAND flash with respect to bad blocks (by using
51693 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
51696 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
51697 Signed-off-by: Stefan Roese <sr@denx.de>
51699 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
51700 Author: Stefan Roese <sr@denx.de>
51701 Date: Fri Jul 6 12:26:51 2007 +0200
51703 ppc4xx: Update lwmon5 default environment
51705 Signed-off-by: Stefan Roese <sr@denx.de>
51707 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
51708 Author: Stefan Roese <sr@denx.de>
51709 Date: Fri Jul 6 11:48:24 2007 +0200
51711 ppc4xx: Update lwmon5 board
51713 Add unlock=yes environment variable to default variables to unlock
51714 the CFI flash by default.
51716 Signed-off-by: Stefan Roese <sr@denx.de>
51718 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
51719 Author: Stefan Roese <sr@denx.de>
51720 Date: Fri Jul 6 09:45:47 2007 +0200
51722 Fix problem with get/setdcr commands introduced by cfg patches
51724 Signed-off-by: Stefan Roese <sr@denx.de>
51726 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
51727 Author: Wolfgang Denk <wd@denx.de>
51728 Date: Fri Jul 6 02:50:19 2007 +0200
51730 Code cleanup and default config update for STC GP3 SSA board.
51732 Signed-off-by: Wolfgang Denk <wd@denx.de>
51734 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
51735 Author: Wolfgang Denk <wd@denx.de>
51736 Date: Thu Jul 5 17:56:27 2007 +0200
51738 Fixing some typos etc. introduced mainly by cfg patches.
51740 Signed-off-by: Wolfgang Denk <wd@denx.de>
51742 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
51743 Author: Wolfgang Denk <wd@denx.de>
51744 Date: Thu Jul 5 11:12:16 2007 +0200
51746 Minor coding style cleanup. Update CHANGELOG.
51748 commit dca3b3d6d6396b67e5e84af53452164923c73443
51749 Author: Jon Loeliger <jdl@jdl.com>
51750 Date: Wed Jul 4 22:33:46 2007 -0500
51752 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
51754 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51756 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
51757 Author: Jon Loeliger <jdl@jdl.com>
51758 Date: Wed Jul 4 22:33:38 2007 -0500
51760 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
51762 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51764 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
51765 Author: Jon Loeliger <jdl@jdl.com>
51766 Date: Wed Jul 4 22:33:30 2007 -0500
51768 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
51770 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51772 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
51773 Author: Jon Loeliger <jdl@jdl.com>
51774 Date: Wed Jul 4 22:33:23 2007 -0500
51776 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
51778 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51780 commit 26a34560d56a9df5bc2ae23525d9229736134757
51781 Author: Jon Loeliger <jdl@jdl.com>
51782 Date: Wed Jul 4 22:33:17 2007 -0500
51784 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
51786 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51788 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
51789 Author: Jon Loeliger <jdl@jdl.com>
51790 Date: Wed Jul 4 22:33:13 2007 -0500
51792 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
51794 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51796 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
51797 Author: Jon Loeliger <jdl@jdl.com>
51798 Date: Wed Jul 4 22:33:07 2007 -0500
51800 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
51802 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51804 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
51805 Author: Jon Loeliger <jdl@jdl.com>
51806 Date: Wed Jul 4 22:33:01 2007 -0500
51808 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
51810 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51812 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
51813 Author: Jon Loeliger <jdl@jdl.com>
51814 Date: Wed Jul 4 22:32:57 2007 -0500
51816 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
51818 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51820 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
51821 Author: Jon Loeliger <jdl@jdl.com>
51822 Date: Wed Jul 4 22:32:51 2007 -0500
51824 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
51826 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51828 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
51829 Author: Jon Loeliger <jdl@jdl.com>
51830 Date: Wed Jul 4 22:32:32 2007 -0500
51832 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
51834 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51836 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
51837 Author: Jon Loeliger <jdl@jdl.com>
51838 Date: Wed Jul 4 22:32:25 2007 -0500
51840 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
51842 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51844 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
51845 Author: Jon Loeliger <jdl@jdl.com>
51846 Date: Wed Jul 4 22:32:19 2007 -0500
51848 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
51850 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51852 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
51853 Author: Jon Loeliger <jdl@jdl.com>
51854 Date: Wed Jul 4 22:32:10 2007 -0500
51856 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
51858 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51860 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
51861 Author: Jon Loeliger <jdl@jdl.com>
51862 Date: Wed Jul 4 22:32:03 2007 -0500
51864 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
51866 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51868 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
51869 Author: Jon Loeliger <jdl@jdl.com>
51870 Date: Wed Jul 4 22:31:56 2007 -0500
51872 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
51874 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51876 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
51877 Author: Jon Loeliger <jdl@jdl.com>
51878 Date: Wed Jul 4 22:31:49 2007 -0500
51880 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
51882 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51884 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
51885 Author: Jon Loeliger <jdl@jdl.com>
51886 Date: Wed Jul 4 22:31:42 2007 -0500
51888 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
51890 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51892 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
51893 Author: Jon Loeliger <jdl@jdl.com>
51894 Date: Wed Jul 4 22:31:35 2007 -0500
51896 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
51898 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51900 commit d794cfefead5fc177cf4f41164e80382e9c9484a
51901 Author: Jon Loeliger <jdl@jdl.com>
51902 Date: Wed Jul 4 22:31:15 2007 -0500
51904 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
51906 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51908 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
51909 Author: Jon Loeliger <jdl@jdl.com>
51910 Date: Wed Jul 4 22:31:07 2007 -0500
51912 include/configs: Use new CONFIG_CMD_* in STx board config files.
51914 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51916 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
51917 Author: Jon Loeliger <jdl@jdl.com>
51918 Date: Wed Jul 4 22:30:58 2007 -0500
51920 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
51922 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51924 commit 2694690e285acaa34922f55f4b5ae030da60c55a
51925 Author: Jon Loeliger <jdl@jdl.com>
51926 Date: Wed Jul 4 22:30:50 2007 -0500
51928 include/configs: Use new CONFIG_CMD_* in TQM board config files.
51930 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51932 commit 1cc4c458329765b58e584a19821e796b3c10e976
51933 Author: Jon Loeliger <jdl@jdl.com>
51934 Date: Wed Jul 4 22:30:28 2007 -0500
51936 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
51938 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51940 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
51941 Author: Jon Loeliger <jdl@jdl.com>
51942 Date: Wed Jul 4 22:30:06 2007 -0500
51944 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
51946 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51948 commit b44896215a09c60fa40cae906f7ed207bbc2c492
51949 Author: Sergei Poselenov <sposelenov@emcraft.com>
51950 Date: Thu Jul 5 08:17:37 2007 +0200
51952 Merged POST framework with the current TOT.
51954 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
51956 commit b24629fa377214d63bb40d1360e354b6d3e4af56
51957 Author: Jon Loeliger <jdl@jdl.com>
51958 Date: Wed Jun 13 13:23:15 2007 -0500
51960 mpc86xx: Remove old CFG_CMD_* references.
51962 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51964 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
51965 Author: Jon Loeliger <jdl@jdl.com>
51966 Date: Wed Jun 13 13:22:54 2007 -0500
51968 Add MPC8568MDS to MAKEALL 85xx target.
51970 It was missing from the original port submission.
51972 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51974 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
51975 Author: Jon Loeliger <jdl@jdl.com>
51976 Date: Wed Jun 13 13:22:08 2007 -0500
51978 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
51980 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51982 commit 56b304ac2091689506088a9ae67f63fd6300cf16
51983 Author: Jon Loeliger <jdl@jdl.com>
51984 Date: Wed Jun 13 13:21:37 2007 -0500
51986 Fix #if typo in CONFIG_CMD_* changes.
51988 Signed-off-by: Jon Loeliger <jdl@freescale.com>
51990 commit f780b83316d9af1f61d71cc88b1917b387b9b995
51991 Author: Niklaus Giger <niklausgiger@gmx.ch>
51992 Date: Wed Jun 27 18:11:38 2007 +0200
51994 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
51996 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
51998 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
51999 Author: Stefan Roese <sr@denx.de>
52000 Date: Wed Jul 4 10:06:30 2007 +0200
52002 ppc4xx: Update lwmon5 board
52004 - Add optional ECC generation routine to preserve existing
52005 RAM values. This is needed for the Linux log-buffer support
52006 - Add optional DDR2 setup with CL=4
52007 - GPIO50 not used anymore
52008 - Lime register setup added
52010 Signed-off-by: Stefan Roese <sr@denx.de>
52012 commit 6810a34677dbc446334f5e451f1682426dd33b49
52013 Author: Grant Likely <grant.likely@secretlab.ca>
52014 Date: Tue Jul 3 00:17:28 2007 -0600
52016 Fix Makefile to use $(MKCONFIG) macro for all board ports
52018 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52020 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
52021 Author: Grant Likely <grant.likely@secretlab.ca>
52022 Date: Tue Jul 3 00:17:28 2007 -0600
52024 Fix Makefile to use $(MKCONFIG) macro for all board ports
52026 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52028 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
52029 Author: Grant Likely <grant.likely@secretlab.ca>
52030 Date: Tue Jul 3 00:34:49 2007 -0600
52032 Correct fixup relocation for mpc83xx
52034 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52036 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
52037 Author: Grant Likely <grant.likely@secretlab.ca>
52038 Date: Tue Jul 3 00:34:44 2007 -0600
52040 Correct fixup relocation for mpc8260
52042 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52044 commit f3a52fe05923935db86985daf9438e2f70ac39aa
52045 Author: Grant Likely <grant.likely@secretlab.ca>
52046 Date: Tue Jul 3 00:34:39 2007 -0600
52048 Correct fixup relocation for mpc824x
52050 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52052 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
52053 Author: Grant Likely <grant.likely@secretlab.ca>
52054 Date: Tue Jul 3 00:34:34 2007 -0600
52056 Correct fixup relocation for mpc8220
52058 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52060 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
52061 Author: Grant Likely <grant.likely@secretlab.ca>
52062 Date: Tue Jul 3 00:34:29 2007 -0600
52064 Correct fixup relocation for MPC5xxx
52066 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52068 commit 3649cd99ba815b6601868735765602f00ef3692b
52069 Author: Grant Likely <grant.likely@secretlab.ca>
52070 Date: Tue Jul 3 00:34:24 2007 -0600
52072 Correct relocation fixup for mpc5xx
52074 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52076 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
52077 Author: Grant Likely <grant.likely@secretlab.ca>
52078 Date: Tue Jul 3 00:34:19 2007 -0600
52080 Don't set gd->reloc_off if relocation of .fixup works correctly
52082 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52084 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
52085 Author: Grant Likely <grant.likely@secretlab.ca>
52086 Date: Tue Jul 3 00:34:14 2007 -0600
52088 Remove obsolete mpc83xx linker scripts
52090 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52092 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
52093 Author: Grant Likely <grant.likely@secretlab.ca>
52094 Date: Tue Jul 3 00:34:09 2007 -0600
52096 Consolidate mpc8260 linker scripts
52098 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52100 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
52101 Author: Grant Likely <grant.likely@secretlab.ca>
52102 Date: Tue Jul 3 00:34:04 2007 -0600
52104 Remove obsolete mpc824x linker scripts
52106 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52108 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
52109 Author: Grant Likely <grant.likely@secretlab.ca>
52110 Date: Tue Jul 3 00:33:59 2007 -0600
52112 Remove obsolete mpc824x linker scripts (3 of 4)
52114 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52116 commit a71c084f3ac7fedf144537db2b2da47323068833
52117 Author: Grant Likely <grant.likely@secretlab.ca>
52118 Date: Tue Jul 3 00:33:53 2007 -0600
52120 Remove obsolete mpc824x linker scripts (2 of 4)
52122 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52124 commit f670a15468d1365241d40022b9408e1004181f5e
52125 Author: Grant Likely <grant.likely@secretlab.ca>
52126 Date: Tue Jul 3 00:33:48 2007 -0600
52128 Remove obsolete mpc824x linker scripts (1 of 4)
52130 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52132 commit 09555bd45a04c0e54f172528d21bc18896550d28
52133 Author: Grant Likely <grant.likely@secretlab.ca>
52134 Date: Tue Jul 3 00:33:43 2007 -0600
52136 Remove obsolete mpc8220 linker scripts
52138 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52140 commit 5efb992f046e51225c93d52f80fecbe433abd789
52141 Author: Grant Likely <grant.likely@secretlab.ca>
52142 Date: Tue Jul 3 00:33:38 2007 -0600
52144 Remove obsolete mpc5xxx linker scripts (3 of 3)
52146 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52148 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
52149 Author: Grant Likely <grant.likely@secretlab.ca>
52150 Date: Tue Jul 3 00:33:33 2007 -0600
52152 Remove obsolete mpc5xxx linker scripts (2 of 3)
52154 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52156 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
52157 Author: Grant Likely <grant.likely@secretlab.ca>
52158 Date: Tue Jul 3 00:33:28 2007 -0600
52160 Remove obsolete mpc5xxx linker scripts (1 of 3)
52162 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52164 commit b7d8e05f8675249b5f208aa73babeed384a4519d
52165 Author: Grant Likely <grant.likely@secretlab.ca>
52166 Date: Tue Jul 3 00:33:23 2007 -0600
52168 Remove obsolete mpc5xx linker scripts
52170 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52172 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
52173 Author: Grant Likely <grant.likely@secretlab.ca>
52174 Date: Tue Jul 3 00:33:18 2007 -0600
52176 Consolidate mpc83xx linker scripts
52178 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52180 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
52181 Author: Grant Likely <grant.likely@secretlab.ca>
52182 Date: Tue Jul 3 00:33:13 2007 -0600
52184 Consolidate mpc8260 linker scripts
52186 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52188 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
52189 Author: Grant Likely <grant.likely@secretlab.ca>
52190 Date: Tue Jul 3 00:33:08 2007 -0600
52192 Consolidate mpc824x linker scripts
52194 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52196 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
52197 Author: Grant Likely <grant.likely@secretlab.ca>
52198 Date: Tue Jul 3 00:33:03 2007 -0600
52200 Consolidate mpc8220 linker scripts
52202 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52204 commit d181c9a15cd41863fe24840d17848429f27d3c8c
52205 Author: Grant Likely <grant.likely@secretlab.ca>
52206 Date: Tue Jul 3 00:32:58 2007 -0600
52208 Consolidate mpc5xxx linker scripts
52210 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52212 commit 287ac924adb7291bebe5086652a362a30ab28b13
52213 Author: Grant Likely <grant.likely@secretlab.ca>
52214 Date: Tue Jul 3 00:32:53 2007 -0600
52216 Consolidate mpc5xx linker scripts
52218 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
52220 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
52221 Author: Wolfgang Denk <wd@denx.de>
52222 Date: Wed Jul 4 00:43:53 2007 +0200
52224 Fix a few file permission problems.
52226 Signed-off-by: Wolfgang Denk <wd@denx.de>
52228 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
52229 Author: Wolfgang Denk <wd@denx.de>
52230 Date: Wed Jul 4 00:38:38 2007 +0200
52232 Minor coding style cleanup. Rebuild CHANGELOG file.
52234 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
52235 Author: Jon Loeliger <jdl@jdl.com>
52236 Date: Mon Jun 11 19:03:44 2007 -0500
52238 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
52240 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52242 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
52243 Author: Jon Loeliger <jdl@jdl.com>
52244 Date: Mon Jun 11 19:03:39 2007 -0500
52246 README: Rewrite command line config to use CONFIG_CMD_* names.
52248 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52250 commit 72a074cec68e5bad60d63206c050974e08afd804
52251 Author: Jon Loeliger <jdl@jdl.com>
52252 Date: Mon Jun 11 19:03:34 2007 -0500
52254 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52256 This is a compatibility step that allows both the older form
52257 and the new form to co-exist for a while until the older can
52258 be removed entirely.
52260 All transformations are of the form:
52262 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52264 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52266 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52268 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
52269 Author: Jon Loeliger <jdl@jdl.com>
52270 Date: Mon Jun 11 19:03:28 2007 -0500
52272 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52274 This is a compatibility step that allows both the older form
52275 and the new form to co-exist for a while until the older can
52276 be removed entirely.
52278 All transformations are of the form:
52280 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52282 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52284 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52286 commit 9107ebe0d352420895ab69b715697bdebc8caf50
52287 Author: Jon Loeliger <jdl@jdl.com>
52288 Date: Mon Jun 11 19:03:23 2007 -0500
52290 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52292 This is a compatibility step that allows both the older form
52293 and the new form to co-exist for a while until the older can
52294 be removed entirely.
52296 All transformations are of the form:
52298 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52300 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52302 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52304 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
52305 Author: Jon Loeliger <jdl@jdl.com>
52306 Date: Mon Jun 11 19:03:19 2007 -0500
52308 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52310 This is a compatibility step that allows both the older form
52311 and the new form to co-exist for a while until the older can
52312 be removed entirely.
52314 All transformations are of the form:
52316 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52318 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52320 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52322 commit 737184114ec9c9e0ab94d6713536126073bd2472
52323 Author: Jon Loeliger <jdl@jdl.com>
52324 Date: Mon Jun 11 19:03:15 2007 -0500
52326 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52328 This is a compatibility step that allows both the older form
52329 and the new form to co-exist for a while until the older can
52330 be removed entirely.
52332 All transformations are of the form:
52334 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52336 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52338 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52340 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
52341 Author: Jon Loeliger <jdl@jdl.com>
52342 Date: Mon Jun 11 19:03:08 2007 -0500
52344 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52346 This is a compatibility step that allows both the older form
52347 and the new form to co-exist for a while until the older can
52348 be removed entirely.
52350 All transformations are of the form:
52352 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52354 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52356 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52358 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
52359 Author: Jon Loeliger <jdl@jdl.com>
52360 Date: Mon Jun 11 19:03:03 2007 -0500
52362 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52364 This is a compatibility step that allows both the older form
52365 and the new form to co-exist for a while until the older can
52366 be removed entirely.
52368 All transformations are of the form:
52370 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52372 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52374 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52376 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
52377 Author: Jon Loeliger <jdl@jdl.com>
52378 Date: Mon Jun 11 19:02:58 2007 -0500
52380 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52382 This is a compatibility step that allows both the older form
52383 and the new form to co-exist for a while until the older can
52384 be removed entirely.
52386 All transformations are of the form:
52388 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52390 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52392 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52394 commit 98b79003c21c2578206003256de4e781d6b36ca8
52395 Author: Jon Loeliger <jdl@jdl.com>
52396 Date: Mon Jun 11 19:02:53 2007 -0500
52398 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52400 This is a compatibility step that allows both the older form
52401 and the new form to co-exist for a while until the older can
52402 be removed entirely.
52404 All transformations are of the form:
52406 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52408 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52410 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52412 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
52413 Author: Jon Loeliger <jdl@jdl.com>
52414 Date: Mon Jun 11 19:02:49 2007 -0500
52416 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52418 This is a compatibility step that allows both the older form
52419 and the new form to co-exist for a while until the older can
52420 be removed entirely.
52422 All transformations are of the form:
52424 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52426 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52428 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52430 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
52431 Author: Jon Loeliger <jdl@jdl.com>
52432 Date: Mon Jun 11 19:02:34 2007 -0500
52434 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52436 This is a compatibility step that allows both the older form
52437 and the new form to co-exist for a while until the older can
52438 be removed entirely.
52440 All transformations are of the form:
52442 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52444 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52446 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52448 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
52449 Author: Jon Loeliger <jdl@jdl.com>
52450 Date: Mon Jun 11 19:02:20 2007 -0500
52452 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52454 This is a compatibility step that allows both the older form
52455 and the new form to co-exist for a while until the older can
52456 be removed entirely.
52458 All transformations are of the form:
52460 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52462 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52464 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52466 commit d5be43de93ff905c465e509d45a3164ef48d26e7
52467 Author: Jon Loeliger <jdl@jdl.com>
52468 Date: Mon Jun 11 19:02:10 2007 -0500
52470 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52472 This is a compatibility step that allows both the older form
52473 and the new form to co-exist for a while until the older can
52474 be removed entirely.
52476 All transformations are of the form:
52478 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52480 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52482 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52484 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
52485 Author: Jon Loeliger <jdl@jdl.com>
52486 Date: Mon Jun 11 19:02:05 2007 -0500
52488 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52490 This is a compatibility step that allows both the older form
52491 and the new form to co-exist for a while until the older can
52492 be removed entirely.
52494 All transformations are of the form:
52496 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52498 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52500 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52502 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
52503 Author: Jon Loeliger <jdl@jdl.com>
52504 Date: Mon Jun 11 19:01:54 2007 -0500
52506 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52508 This is a compatibility step that allows both the older form
52509 and the new form to co-exist for a while until the older can
52510 be removed entirely.
52512 All transformations are of the form:
52514 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52516 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52518 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52520 commit a76adc8142c1d956385a109e0b70f9319ede4d66
52521 Author: Jon Loeliger <jdl@jdl.com>
52522 Date: Mon Jun 11 19:01:43 2007 -0500
52524 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
52526 This is a compatibility step that allows both the older form
52527 and the new form to co-exist for a while until the older can
52528 be removed entirely.
52530 All transformations are of the form:
52532 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
52534 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
52536 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52538 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
52539 Author: Jon Loeliger <jdl@jdl.com>
52540 Date: Mon Jun 11 19:01:34 2007 -0500
52542 Introduce initial versions of new Command Config files.
52544 Derive three new files from cmd_confdefs.h:
52545 config_bootp.h - Has BOOTP related config options, not commands
52546 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
52547 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
52549 For now, include "config_bootp.h" for compatability until all
52550 users of it directly include it properly.
52552 Signed-off-by: Jon Loeliger <jdl@freescale.com>
52554 commit 1f2a05898658900dc5717761e27abf2052e67e13
52555 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
52556 Date: Sat Jun 30 18:50:48 2007 +0200
52560 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
52562 commit a5d71e290f3673269be8eefb4ec44f53412f9461
52563 Author: Heiko Schocher <hs@pollux.denx.de>
52564 Date: Mon Jun 25 19:11:37 2007 +0200
52566 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
52568 Signed-off-by: Heiko Schocher <hs@denx.de>
52570 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
52571 Author: Niklaus Giger <niklaus.giger@nestal.com>
52572 Date: Mon Jun 25 17:03:13 2007 +0200
52574 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
52576 This patch prints the DDR status registers upon machine check
52577 interrupt on the 440EPx/GRx. This can be useful especially when
52578 ECC support is enabled.
52580 I added some small changes to the original patch from Niklaus to
52581 make it compile clean.
52583 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
52584 Signed-off-by: Stefan Roese <sr@denx.de>
52586 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
52587 Author: Niklaus Giger <niklaus.giger@nestal.com>
52588 Date: Mon Jun 25 16:50:55 2007 +0200
52590 ppc4xx: Fix O=buildir builds
52592 This patch fixes the problem to assemble cpu/ppc4xx/start.S
52593 experienced last week where building failed having specified
52594 O=../build.sequoia.
52596 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
52598 commit 466fff1a7bb5fe764a06450626f6098219f446b8
52599 Author: Stefan Roese <sr@denx.de>
52600 Date: Mon Jun 25 15:57:39 2007 +0200
52602 ppc4xx: Add pci_pre_init() for 405 boards
52604 This patch removes the CFG_PCI_PRE_INIT option completely, since
52605 it's not needed anymore with the patch from Matthias Fuchs with
52606 the "weak" pci_pre_init() implementation.
52608 Signed-off-by: Stefan Roese <sr@denx.de>
52610 commit 6f35c53166213c24a5a0e2390ed861136ff73870
52611 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52612 Date: Sun Jun 24 17:41:21 2007 +0200
52614 ppc4xx: Maintenance patch for esd's CPCI405 derivats
52616 -add pci_pre_init() for pci interrupt fixup code
52617 -disable phy sleep mode via reset_phy() function
52618 -use correct io accessors
52621 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52623 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
52624 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52625 Date: Sun Jun 24 17:23:41 2007 +0200
52627 ppc4xx: Add pci_pre_init() for 405 boards
52629 This patch adds support for calling a plattform dependant
52630 pci_pre_init() function for 405 boards. This can be used to
52631 move the current pci_405gp_fixup_irq() function into the
52634 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
52635 A default function with 'weak' attribute is used when
52636 a board specific pci_pre_init() is not implemented.
52638 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
52640 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
52641 Author: Wolfgang Denk <wd@denx.de>
52642 Date: Fri Jun 22 23:59:00 2007 +0200
52644 Coding stylke cleanup; rebuild CHANGELOG
52646 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
52647 Author: Igor Lisitsin <igor@emcraft.com>
52648 Date: Wed Apr 18 14:55:19 2007 +0400
52650 Adapt log buffer code to support Linux 2.6
52652 A new environment variable, "logversion", selects the log buffer
52653 behaviour. If it is not set or set to a value other than 2, then the
52654 old, Linux 2.4.4, behaviour is selected.
52656 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
52659 commit a11e06965ec91270c51853407ff1261d3c740386
52660 Author: Igor Lisitsin <igor@emcraft.com>
52661 Date: Wed Mar 28 19:06:19 2007 +0400
52663 Extend POST support for PPC440
52665 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
52667 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
52670 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
52671 Author: Heiko Schocher <hs@pollux.denx.de>
52672 Date: Fri Jun 22 19:11:54 2007 +0200
52674 [PCS440EP] upgrade the PCS440EP board:
52675 - Show on the Status LEDs, some States of the board.
52676 - Get the MAC addresses from the EEProm
52678 - use the CF on the board.
52679 - check the U-Boot image in the Flash with a SHA1
52681 - use dynamic TLB entries generation for the SDRAM
52683 Signed-off-by: Heiko Schocher <hs@denx.de>
52685 commit 3a1f5c81b0b9557817a789bece839905581c2205
52686 Author: Stefan Roese <sr@denx.de>
52687 Date: Fri Jun 22 16:58:40 2007 +0200
52689 ppc4xx: Fix problem with extended program_tlb() funtion
52691 The recently extended program_tlb() function had a problem when
52692 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
52693 virtual address was not incremented. This patch fixes this issue
52694 and is tested on Katmai with 512MB SDRAM.
52696 Signed-off-by: Stefan Roese <sr@denx.de>
52698 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
52699 Author: Rafal Jaworowski <raj@semihalf.com>
52700 Date: Fri Jun 22 14:58:04 2007 +0200
52702 [ppc] Fix build breakage for all non-4xx PowerPC variants.
52704 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
52705 - minor 4xx cleanup
52707 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
52708 Author: Mike Frysinger <vapier@gentoo.org>
52709 Date: Fri Jun 22 10:34:12 2007 +0200
52711 [patch] add nand_init() prototype to nand.h
52713 since nand_init() is expected to be called by other parts of u-boot, there
52714 should be a prototype for it in nand.h
52716 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
52717 Signed-off-by: Stefan Roese <sr@denx.de>
52719 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
52720 Author: Wolfgang Denk <wd@denx.de>
52721 Date: Wed Jun 20 18:14:24 2007 +0200
52723 Coding style cleanup. Refresh CHANGELOG.
52725 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
52726 Author: Stefan Roese <sr@denx.de>
52727 Date: Tue Jun 19 17:22:44 2007 +0200
52729 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
52731 This patch adds a board command to configure the I2C bootstrap EEPROM
52732 values. Right now 533 and 667MHz are supported for booting either via NOR
52733 or NAND FLASH. Here the usage:
52735 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
52736 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
52738 Signed-off-by: Stefan Roese <sr@denx.de>
52740 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
52741 Author: Stefan Roese <sr@denx.de>
52742 Date: Tue Jun 19 16:42:31 2007 +0200
52744 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
52746 The latest changes showed a problem with the location of the NAND-SPL
52747 image in the OCM and the init-data area (incl. cache). This patch
52748 fixes this problem.
52750 Signed-off-by: Stefan Roese <sr@denx.de>
52752 commit 86ba99e34194394052d24c04dc40d1263d29a26f
52753 Author: Stefan Roese <sr@denx.de>
52754 Date: Tue Jun 19 16:40:58 2007 +0200
52756 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
52758 Signed-off-by: Stefan Roese <sr@denx.de>
52760 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
52761 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
52762 Date: Mon Jun 18 13:50:13 2007 -0500
52764 Added M5329AFEE and M5329BFEE Platforms
52766 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
52767 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
52768 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
52771 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
52772 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
52773 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
52774 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
52775 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
52776 lib_m68k/time.c, net/eth.c and rtc/Makefile
52778 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
52780 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
52781 Author: Michal Simek <monstr@monstr.eu>
52782 Date: Sun Jun 17 19:04:11 2007 +0200
52784 [fix] email reparation
52786 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
52787 Author: Michal Simek <monstr@monstr.eu>
52788 Date: Sun Jun 17 19:03:21 2007 +0200
52790 [FIX] fix microblaze file permitission
52792 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
52793 Author: Stefan Roese <sr@denx.de>
52794 Date: Fri Jun 15 11:33:41 2007 +0200
52796 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
52798 Now CONFIG_440 has to be defined in all PPC440 board config files.
52800 Signed-off-by: Stefan Roese <sr@denx.de>
52802 commit efa35cf12d914d4caba942acd5a6c45f217de302
52803 Author: Grzegorz Bernacki <gjb@semihalf.com>
52804 Date: Fri Jun 15 11:19:28 2007 +0200
52806 ppc4xx: Clean up 440 exceptions handling
52808 - Introduced dedicated switches for building 440 and 405 images required
52809 for 440-specific machine instructions like 'rfmci' etc.
52811 - Exception vectors moved to the proper location (_start moved away from
52812 the critical exception handler space, which it occupied)
52814 - CriticalInput now serviced (with default handler)
52816 - MachineCheck properly serviced (added a dedicated handler and return
52819 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
52820 unhandled and those not relevant for 4xx were eliminated)
52822 - Eliminated Linux leftovers, removed dead code
52824 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
52825 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
52826 Signed-off-by: Stefan Roese <sr@denx.de>
52828 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
52829 Author: Stefan Roese <sr@denx.de>
52830 Date: Fri Jun 15 08:18:01 2007 +0200
52832 [ppc4xx] Add initial lwmon5 board support
52834 This patch adds initial support for the Liebherr lwmon5 board euqipped
52835 with an AMCC 440EPx PowerPC.
52837 Signed-off-by: Stefan Roese <sr@denx.de>
52839 commit 85f737376d5ff3d5f0d45a8b657686326d175307
52840 Author: Stefan Roese <sr@denx.de>
52841 Date: Fri Jun 15 07:39:43 2007 +0200
52843 [ppc4xx] Extend 44x GPIO setup with default output state
52845 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
52846 is extended with the default GPIO output state (level).
52848 Signed-off-by: Stefan Roese <sr@denx.de>
52850 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
52851 Author: Stefan Roese <sr@denx.de>
52852 Date: Thu Jun 14 11:14:32 2007 +0200
52854 [ppc4xx] Extend program_tlb() with virtual & physical addresses
52856 Now program_tlb() allows to program a TLB (or multiple) with
52857 different virtual and physical addresses. With this change, now one
52858 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
52859 diabled and once with caches enabled.
52861 Signed-off-by: Stefan Roese <sr@denx.de>
52863 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
52864 Author: Detlev Zundel <dzu@denx.de>
52865 Date: Wed May 23 19:02:41 2007 +0200
52867 Change 'repeatable' attribute of some commands to sensible values.
52869 Most prominently this changes 'erase' to be non-repeatable.
52871 Signed-off-by: Detlev Zundel <dzu@denx.de>
52873 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
52874 Author: Detlev Zundel <dzu@denx.de>
52875 Date: Wed May 23 18:47:48 2007 +0200
52877 Fix 'run' not to continue after interrupted command
52879 Signed-off-by: Detlev Zundel <dzu@denx.de>
52881 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
52882 Author: Jason Jin <Jason.jin@freescale.com>
52883 Date: Mon Jun 11 15:14:24 2007 +0200
52885 USB: This patch fix readl in ohci swap reg access.
52887 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
52889 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
52890 Author: Bartlomiej Sieka <tur@semihalf.com>
52891 Date: Fri Jun 8 14:52:22 2007 +0200
52893 TQM5200: Add Flat Device Tree support, update default env. accordingly.
52895 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
52896 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
52898 commit 9045f33c023f698660a2e45d1b2194c0711abebc
52899 Author: Wolfgang Denk <wd@denx.de>
52900 Date: Fri Jun 8 10:24:58 2007 +0200
52902 Fix config problems on SC3 board; make ide_reset_timeout work.
52904 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
52905 Author: Benoît Monin <bmonin@adeneo.eu>
52906 Date: Fri Jun 8 09:55:24 2007 +0200
52908 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
52910 Set the correct value in GPIOx_TCR when configuring the gpio
52911 with CFG_440_GPIO_TABLE.
52913 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
52914 Signed-off-by: Stefan Roese <sr@denx.de>
52916 commit f539edc076cfe52bff919dd512ba8d7af0e22092
52917 Author: Vadim Bendebury <vbendeb@google.com>
52918 Date: Thu May 24 15:52:25 2007 -0700
52920 cosmetic changes to bcm570x driver
52922 This is a cosmetic only changes submission.
52923 It affects files relevant to bcm570x driver.
52924 the commands used to generate this change was
52927 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
52929 The BMW target (the only one using this chip so far) builds cleanly, the
52930 `before and after' generated object files for drivers/bcm570x.c and
52931 drivers/tigon3.o are identical as reported by objdump -d
52933 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
52934 Signed-off-by: Ben Warren <bwarren@qstreams.com>
52936 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
52937 Author: Wolfgang Denk <wd@denx.de>
52938 Date: Wed Jun 6 16:26:56 2007 +0200
52940 Coding Style cleanup; generate new CHANGELOG file.
52942 Signed-off-by: Wolfgang Denk <wd@denx.de>
52944 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
52945 Author: Markus Klotzbuecher <mk@denx.de>
52946 Date: Wed Jun 6 11:49:44 2007 +0200
52948 TRAB, USB: update trab board configuration for use of generic ohci driver
52950 commit dace45acd1c1357daa9322099d07c9a9e08b0024
52951 Author: Markus Klotzbuecher <mk@denx.de>
52952 Date: Wed Jun 6 11:49:43 2007 +0200
52954 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
52956 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
52957 Author: Markus Klotzbuecher <mk@denx.de>
52958 Date: Wed Jun 6 11:49:43 2007 +0200
52960 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
52962 commit fc43be478f2aa37ce38acd85355038866e4162af
52963 Author: Markus Klotzbuecher <mk@denx.de>
52964 Date: Wed Jun 6 11:49:35 2007 +0200
52966 USB/OHCI: endianness cleanup in the generic ohci driver
52968 commit c440bfe6d6d92d66478a7e84402b31f48413617b
52969 Author: Stefan Roese <sr@denx.de>
52970 Date: Wed Jun 6 11:42:13 2007 +0200
52972 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
52974 This patch adds NAND booting support for the AMCC Acadia eval board.
52976 Please make sure to configure jumper J7 to position 2-3 when booting
52977 from NOR, and to position 1-2 when booting for NAND.
52979 I also added a board command to configure the I2C bootstrap EEPROM
52980 values. Right now only 267MHz is support for booting either via NOR
52981 or NAND FLASH. Here the usage:
52983 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
52984 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
52986 Signed-off-by: Stefan Roese <sr@denx.de>
52988 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
52989 Author: Rodolfo Giometti <giometti@linux.it>
52990 Date: Wed Jun 6 10:08:14 2007 +0200
52992 Files include/linux/byteorder/{big,little}_endian.h define
52993 __BIG_ENDIAN and __LITTLE_ENDIAN.
52995 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
52997 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
52998 Author: Zhang Wei <wei.zhang@freescale.com>
52999 Date: Wed Jun 6 10:08:14 2007 +0200
53001 Add USB PCI-OHCI, USB keyboard and event poll support to the
53002 MPC8641HPCN board config file.
53004 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
53006 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
53007 Author: Zhang Wei <wei.zhang@freescale.com>
53008 Date: Wed Jun 6 10:08:14 2007 +0200
53010 USB PCI-OHCI, interrupt pipe and usb event poll support
53012 This patch added USB PCI-OHCI chips support, interrupt pipe support
53013 and usb event poll support. For supporting the USB interrupt pipe, the
53014 globe urb_priv is moved to purb in ed struct. Now, we can process
53015 several urbs at one time. The interrupt pipe support codes are ported
53016 from Linux kernel 2.4.
53018 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
53020 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
53021 Author: Zhang Wei <wei.zhang@freescale.com>
53022 Date: Wed Jun 6 10:08:13 2007 +0200
53024 USB event poll support
53026 This patch adds USB event poll support, which could be used in usbkbd
53027 and other usb devices driver when the asynchronous interrupt
53028 processing is supported.
53030 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
53032 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
53033 Author: Rodolfo Giometti <giometti@linux.it>
53034 Date: Wed Jun 6 10:08:12 2007 +0200
53036 ISP116x: delay for crappy USB keys
53038 Using some (very) slow USB keys cause the USB host controller buffers
53039 are not ready to be read by the CPU so we need an extra delay before
53040 reading the USB storage data.
53042 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
53044 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
53045 Author: Markus Klotzbuecher <mk@denx.de>
53046 Date: Wed Jun 6 10:08:12 2007 +0200
53048 Change duplicate usb_cpu_init_fail to usb_board_init_fail
53050 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
53053 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
53055 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
53056 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
53057 Date: Tue Jun 5 12:30:52 2007 -0500
53059 mpc8641 image size cleanup
53061 e600 does not have a bootpg restriction.
53062 Move the version string to beginning of image at fff00000.
53063 Resetvec.S is not needed.
53064 Update flash copy instructions.
53065 Add tftpflash env variable
53067 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
53068 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53070 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
53071 Author: Benoît Monin <bmonin@adeneo.eu>
53072 Date: Mon Jun 4 08:36:05 2007 +0200
53074 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
53076 The attached patch is mainly cosmetic, allowing u-boot to
53077 display the correct bootstrap option letter according to the
53080 The original patch was extended with 405EZ support by Stefan
53083 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
53084 Signed-off-by: Stefan Roese <sr@denx.de>
53086 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
53087 Author: Nikita V. Youshchenko <yoush@debian.org>
53088 Date: Wed May 23 12:45:19 2007 +0400
53090 fix compilation problem for mpc8349itx CFG_RAMBOOT
53092 Current include/configs/MPC8349ITX.h does contain some support for building
53093 image that will be started from memory (without putting in into flash).
53094 It could be triggered by building with TEXT_BASE set to a low value.
53096 However, this support is incomplete: using of low TEXT_BASE causes
53097 defining configuration macros in inconsistent way, which later leads
53098 to compilation errors. In particular. flash support is being disabled,
53099 but then flash structures get referenced.
53101 This patch fixes this, making it possible to build with low TEXT_BASE.
53103 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
53105 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
53107 commit 8a364f0970de49949d635e60accf463c6443ef8c
53108 Author: Nikita V. Youshchenko <yoush@debian.org>
53109 Date: Wed May 23 12:45:25 2007 +0400
53111 add missing 'console' var to default mpc8349itx config
53113 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
53115 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
53116 Author: Stefan Roese <sr@denx.de>
53117 Date: Fri Jun 1 16:18:17 2007 +0200
53119 ppc4xx: Add missing file for Bamboo NAND booting support
53121 Signed-off-by: Stefan Roese <sr@denx.de>
53123 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
53124 Author: Stefan Roese <sr@denx.de>
53125 Date: Fri Jun 1 15:58:19 2007 +0200
53127 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
53129 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
53130 suggested by AMCC it is not recommended to dynamically change the EBC
53131 speed after bootup. So we undo this change to be on the safe side.
53133 Signed-off-by: Stefan Roese <sr@denx.de>
53135 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
53136 Author: Stefan Roese <sr@denx.de>
53137 Date: Fri Jun 1 15:29:04 2007 +0200
53139 ppc4xx: Update Sequoia NAND booting support with ECC
53141 Signed-off-by: Stefan Roese <sr@denx.de>
53143 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
53144 Author: Stefan Roese <sr@denx.de>
53145 Date: Fri Jun 1 15:27:11 2007 +0200
53147 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
53149 This patch adds NAND booting support for the AMCC Bamboo eval board.
53150 Since the NAND-SPL boot image is limited to 4kbytes, this version
53151 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
53152 supported, since the setup code for I2C DIMM autodetection and
53153 configuration is too big for this NAND bootloader.
53155 Signed-off-by: Stefan Roese <sr@denx.de>
53157 commit 42be56f53c8b107868e6125c8524ae84293e95a7
53158 Author: Stefan Roese <sr@denx.de>
53159 Date: Fri Jun 1 15:23:04 2007 +0200
53161 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
53163 The U-Boot NAND booting support is now extended to support ECC
53164 upon loading of the NAND U-Boot image.
53166 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
53168 Signed-off-by: Stefan Roese <sr@denx.de>
53170 commit a471db07fbb65a841ffc9f4f112562b945230f98
53171 Author: Stefan Roese <sr@denx.de>
53172 Date: Fri Jun 1 15:19:29 2007 +0200
53174 ppc4xx: Prepare Bamboo port for NAND booting support
53176 This patch updates the "normal" Bamboo NOR booting port, so
53177 that it is compatible with the coming soon NAND booting
53180 It also enables the 2nd NAND flash on the Bamboo.
53182 Signed-off-by: Stefan Roese <sr@denx.de>
53184 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
53185 Author: Stefan Roese <sr@denx.de>
53186 Date: Fri Jun 1 15:16:58 2007 +0200
53188 ppc4xx: Update in_be32() functions and friends to latest Linux version
53190 Signed-off-by: Stefan Roese <sr@denx.de>
53192 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
53193 Author: Stefan Roese <sr@denx.de>
53194 Date: Fri Jun 1 15:15:12 2007 +0200
53196 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
53198 This patch adds hardware ECC support to the NDFC driver. It also
53199 changes the register access from using the "simple" in32/out32
53200 functions to the in_be32/out_be32 functions, which make sure
53201 that the access is correctly synced. This is the only recommended
53202 access to SoC registers in the current Linux kernel.
53204 Signed-off-by: Stefan Roese <sr@denx.de>
53206 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
53207 Author: Stefan Roese <sr@denx.de>
53208 Date: Fri Jun 1 15:12:15 2007 +0200
53210 NAND: Update nand_ecc.c to latest Linux version
53212 This patch updates the nand_ecc code to the latest Linux version.
53213 The main reason for this is the more compact code. This makes
53214 it possible to include the ECC code into the NAND bootloader
53215 image (NAND_SPL) for PPC4xx.
53217 Signed-off-by: Stefan Roese <sr@denx.de>
53219 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
53220 Author: Stefan Roese <sr@denx.de>
53221 Date: Fri Jun 1 15:09:50 2007 +0200
53223 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
53225 Signed-off-by: Stefan Roese <sr@denx.de>
53227 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
53228 Author: Stefan Roese <sr@denx.de>
53229 Date: Fri Jun 1 13:45:24 2007 +0200
53231 ppc4xx: Change Luan config file to support ECC
53233 With the updated 44x DDR2 driver the Luan board now supports
53234 ECC generation and checking.
53236 Signed-off-by: Stefan Roese <sr@denx.de>
53238 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
53239 Author: Stefan Roese <sr@denx.de>
53240 Date: Fri Jun 1 13:45:00 2007 +0200
53242 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
53244 Add config option for 180 degree advance clock control as needed
53245 for the AMCC Luan eval board.
53247 Signed-off-by: Stefan Roese <sr@denx.de>
53249 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
53250 Author: Wolfgang Denk <wd@denx.de>
53251 Date: Thu May 31 17:20:09 2007 +0200
53253 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
53255 Signed-off-by: Wolfgang Denk <wd@denx.de>
53257 commit 7049288fb1f16f1b317140226cdebd07bd416395
53258 Author: Bartlomiej Sieka <tur@semihalf.com>
53259 Date: Sun May 27 17:26:46 2007 +0200
53261 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
53263 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
53265 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
53266 Author: Bartlomiej Sieka <tur@semihalf.com>
53267 Date: Sun May 27 17:06:36 2007 +0200
53269 Motion-PRO: Add support for redundant environment.
53271 Enable redundant environment, add a MTD partition for it; also add env.
53272 variable command for passing MTD partitions to the kernel command line.
53274 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
53275 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53277 commit a26eabeec31746f06d309103690892805696e344
53278 Author: Bartlomiej Sieka <tur@semihalf.com>
53279 Date: Sun May 27 17:05:11 2007 +0200
53281 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
53283 Allow passing longer command line to the kernel - useful especially
53284 for passing MTD partition layout.
53286 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
53287 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53289 commit 9160b96f71483a116de81c68985e8ee306d36764
53290 Author: Bartlomiej Sieka <tur@semihalf.com>
53291 Date: Sun May 27 17:04:18 2007 +0200
53293 Fix: Add missing NULL termination in strings expanded by macros parser.
53295 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
53296 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53298 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
53299 Author: Bartlomiej Sieka <tur@semihalf.com>
53300 Date: Sun May 27 17:03:37 2007 +0200
53302 Motion-PRO: Update EEPROM's page write bits and write delay.
53304 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
53305 have a page write capability of two bytes", and "This device offers fast (1ms)
53306 byte write". Add 3ms of extra delay.
53308 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
53309 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53311 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
53312 Author: Bartlomiej Sieka <tur@semihalf.com>
53313 Date: Sun May 27 16:58:45 2007 +0200
53315 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
53317 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
53318 networking does not function. This commit switches PHY to TX mode by clearing
53319 the FX_SEL bit of Mode Control Register. It also reverses commit
53320 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
53322 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
53323 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53325 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
53326 Author: Bartlomiej Sieka <tur@semihalf.com>
53327 Date: Sun May 27 16:57:15 2007 +0200
53329 Motion-PRO: Add support for the temperature sensor.
53331 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
53332 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53334 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
53335 Author: Bartlomiej Sieka <tur@semihalf.com>
53336 Date: Sun May 27 16:55:23 2007 +0200
53338 Motion-PRO: Add displaying of CPLD revision information during boot.
53340 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
53341 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53343 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
53344 Author: Bartlomiej Sieka <tur@semihalf.com>
53345 Date: Sun May 27 16:53:43 2007 +0200
53347 MPC5xxx: Change names of defines related to IPB and PCI clocks.
53349 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
53350 them does not cause PCI or IPB clocks to run at the specified speed.
53351 Instead, they configure divisors used to calculate said clocks. This
53352 patch renames the defines according to their real function.
53354 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
53355 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53357 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
53358 Author: Bartlomiej Sieka <tur@semihalf.com>
53359 Date: Sun May 27 16:51:48 2007 +0200
53361 Motion-PRO: Add LED support.
53363 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
53364 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
53365 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
53367 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
53368 Author: Ulf Samuelsson <ulf@atmel.com>
53369 Date: Thu May 24 12:12:47 2007 +0200
53371 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
53373 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
53374 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
53375 Signed-off-by: Stefan Roese <sr@denx.de>
53377 commit d756894722c888d09a9fa1df8323753772d3dcce
53378 Author: Stefan Roese <sr@denx.de>
53379 Date: Thu May 24 09:49:00 2007 +0200
53381 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
53383 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
53384 fixes a small bug in the 405EZ OCM initialization. Thanks for
53387 Signed-off-by: Stefan Roese <sr@denx.de>
53389 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
53390 Author: Stefan Roese <sr@denx.de>
53391 Date: Thu May 24 08:22:09 2007 +0200
53393 ppc4xx: Update AMCC Acadia support for board revision 1.1
53395 This patch updates the Acadia (405EZ) support for the new 1.1 board
53396 revision. It also adds support for NAND FLASH via the 4xx NDFC.
53398 Please note that the jumper J7 must be in position 2-3 for this
53399 NAND support. Position 1-2 is for NAND booting only. NAND booting
53400 support will follow later.
53402 Signed-off-by: Stefan Roese <sr@denx.de>
53404 commit 822d55365bb557e084d0e33625a6dedcc866110b
53405 Author: Jon Loeliger <jdl@freescale.com>
53406 Date: Wed May 23 14:09:46 2007 -0500
53408 Add LIST_86xx MAKEALL target for PowerPC builds.
53410 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53412 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
53413 Author: Stefan Roese <sr@denx.de>
53414 Date: Tue May 22 12:48:09 2007 +0200
53416 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
53418 Signed-off-by: Stefan Roese <sr@denx.de>
53420 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
53421 Author: Stefan Roese <sr@denx.de>
53422 Date: Tue May 22 12:46:10 2007 +0200
53424 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
53426 This patch adds support for 405 PPC's to the 4xx NAND driver
53427 ndfc.c. This is in preparation for the new AMCC 405EZ.
53429 Signed-off-by: Stefan Roese <sr@denx.de>
53431 commit 10603d76767426be803dadd4fb688b97eb69481c
53432 Author: Stefan Roese <sr@denx.de>
53433 Date: Mon May 21 07:41:22 2007 +0200
53435 ppc4xx: Fix problem in 405EZ OCM initialization
53437 As spotted by Bruce Adler this patch fixes an initialization problem
53440 Signed-off-by: Stefan Roese <sr@denx.de>
53442 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
53443 Author: Peter Pearse <peter.pearse@arm.com>
53444 Date: Fri May 18 16:47:03 2007 +0100
53446 Reduce line lengths to 80 characters max.
53448 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
53449 Author: Peter Pearse <peter.pearse@arm.com>
53450 Date: Fri May 18 14:34:07 2007 +0100
53452 Makefile permissions
53454 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
53455 Author: Peter Pearse <peter.pearse@arm.com>
53456 Date: Fri May 18 14:33:11 2007 +0100
53458 Makefile permissions
53460 commit 255a3577c848706441daee0174543efe205a77f8
53461 Author: Kim Phillips <kim.phillips@freescale.com>
53462 Date: Wed May 16 16:52:19 2007 -0500
53464 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
53466 For all practical u-boot purposes, TSECs don't differ throughout the
53467 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
53469 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
53471 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
53472 Author: Stefano Babic <sbabic@denx.de>
53473 Date: Wed May 16 14:49:12 2007 +0200
53475 Fix compile problem cause my Microblaze merge
53477 Signed-off-by: Stefano Babic <sbabic@denx.de>
53479 commit ada4697d0230d6da552867777f98a67ec3ba2579
53480 Author: Jeffrey Mann <mannj@embeddedplanet.com>
53481 Date: Wed May 16 13:23:10 2007 +0200
53483 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
53485 Because the Sequoia board does not boot with an EBC faster than 66MHz,
53486 the clock divider are changed after the initial boot process.
53488 This allows for maximum clocking speeds to be achieved on newer boards.
53489 Sequoia boards with 666.66 MHz processors require that the EBC divider
53490 be set to 3 in order to start the initial boot process at a slower EBC
53491 speed. After the initial boot process, the divider can be set back to 2,
53492 which will cause the boards to run at 83.333MHz. This is backward
53493 compatible with boards with 533.33 MHz processors, as these boards will
53494 already be set with an EBC divider of 2.
53496 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
53498 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
53499 Author: Wolfgang Denk <wd@denx.de>
53500 Date: Wed May 16 01:16:53 2007 +0200
53502 Minor Coding Style cleanup, update CHANGELOG.
53504 Signed-off-by: Wolfgang Denk <wd@denx.de>
53506 commit d62f64cc23a940eafe712c776b3249e4160753d1
53507 Author: Wolfgang Denk <wd@denx.de>
53508 Date: Wed May 16 00:13:33 2007 +0200
53510 Coding Style Cleanup, new CHANGELOG
53512 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
53513 Author: Wolfgang Denk <wd@denx.de>
53514 Date: Tue May 15 23:38:05 2007 +0200
53516 Minor coding style cleanup.
53518 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
53519 Author: mushtaq khan <mushtaq_k@procsys.com>
53520 Date: Fri Apr 20 14:23:02 2007 +0530
53522 Add driver for S-ATA-controller on Intel processors with South
53523 Bridge, ICH-5, ICH-6 and ICH-7.
53527 1. Code is divided in to two files. All functions, which are
53528 controller specific are kept in "drivers/ata_piix.c" file and
53529 functions, which are not controller specific, are kept in
53530 "common/cmd_sata.c" file.
53532 2. Reading and Writing from the S-ATA drive is done using PIO method.
53534 3. Driver can be configured for 48-bit addressing by defining macro
53535 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
53538 4. S-ATA read function is hooked to the File system, commands like
53539 ext2ls and ext2load file can be used. This has been tested.
53541 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
53542 controller and identifies the S-ATA drives connected to it.
53544 6. U-Boot command "sata" is added, which is used to read/write, print
53545 partition table and get info about the drives present. This I have
53546 implemented in same way as "ide" command is implemented in U-Boot.
53548 7. This driver is for S-ATA in native mode.
53550 8. This driver does not support the Native command queuing and
53553 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
53555 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
53556 Author: mushtaq khan <mushtaq_k@procsys.com>
53557 Date: Mon Apr 30 15:57:22 2007 +0530
53559 Fixes bug clearing the bss section for i386
53562 There is a bug in the code of clearing the bss section for processor
53563 i386.(File: cpu/i386/start.S)
53564 In the code, bss_start addr (starting addr of bss section) is put into
53565 the register %eax, but the code which clears the bss section refers to
53566 the addr pointed by %edi.
53568 This patch fixes this bug by putting bss_start into %edi register.
53570 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
53572 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
53573 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
53574 Date: Mon Apr 30 16:47:28 2007 -0500
53576 Add support for BCM5464 Quad Phy
53578 Added support for Broadcom's BCM5464 Quad Phy
53580 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
53582 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
53583 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
53584 Date: Wed May 9 08:10:57 2007 +0800
53586 Search the exception table with linear algorithm
53588 Search the exception table with linear algorithm instead of
53589 bisecting algorithm.
53590 Because the exception table might be unsorted.
53592 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
53594 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
53595 Author: Aubrey.Li <aubrey.adi@gmail.com>
53596 Date: Mon May 14 11:47:35 2007 +0800
53598 Fix compilation issues on MACOSX
53600 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
53601 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
53603 commit 56fd7162985c412317bbf763a225fba23c64fd31
53604 Author: Stephen Williams <steve@icarus.com>
53605 Date: Tue May 15 07:55:42 2007 -0700
53607 Fix for compile of JSE target
53609 The attached patch fixes the compile of the JSE board in the
53610 denx git as of 14 may 2007. It is an extremely simple patch,
53611 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
53613 Fix to compile JSE against 20070514 git of u-boot
53615 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
53616 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
53617 Date: Sun May 13 21:01:03 2007 +0900
53619 sh: MS7750SE support.
53621 This adds support for the Hitachi MS7750SE.
53623 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
53625 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
53626 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
53627 Date: Sun May 13 20:58:00 2007 +0900
53629 sh: First support code of SuperH.
53631 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
53633 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
53634 Author: Stefan Roese <sr@denx.de>
53635 Date: Fri May 11 12:01:49 2007 +0200
53637 ppc4xx: Add mtcpr/mfcpr access macros
53639 Signed-off-by: Stefan Roese <sr@denx.de>
53641 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
53642 Author: Stefan Roese <sr@denx.de>
53643 Date: Fri May 11 12:01:06 2007 +0200
53645 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
53647 Signed-off-by: Stefan Roese <sr@denx.de>
53649 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
53650 Author: Piotr Kruszynski <ppk@semihalf.com>
53651 Date: Thu May 10 16:55:52 2007 +0200
53653 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
53656 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
53657 Author: Peter Pearse <peter.pearse@arm.com>
53658 Date: Wed May 9 11:42:44 2007 +0100
53660 Add the board directory for SMN42
53662 commit 160131bf965785419626df6c388729fe0b597992
53663 Author: Peter Pearse <peter.pearse@arm.com>
53664 Date: Wed May 9 11:41:58 2007 +0100
53666 Add the files for the SMN42 board
53668 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
53669 Author: Peter Pearse <peter.pearse@arm.com>
53670 Date: Wed May 9 11:40:34 2007 +0100
53672 Remove the deleted files for the SMN42 patch
53674 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
53675 Author: Peter Pearse <peter.pearse@arm.com>
53676 Date: Wed May 9 11:37:56 2007 +0100
53678 New board SMN42 branch
53680 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
53681 Author: Peter Pearse <peter.pearse@arm.com>
53682 Date: Wed May 9 10:24:38 2007 +0100
53684 Makefile permissions
53686 commit b84289b595731e8851df46e893845cc1322c9b9b
53687 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
53688 Date: Tue May 8 14:17:07 2007 -0500
53690 8641hpcn: Fix Makefile after moving pixis to board/freescale.
53692 The OBJTREE != SRCTREE build scenario was broken.
53695 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
53696 Signed-off-by: Jon Loeliger <jdl@freescale.com>
53698 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
53699 Author: Michal Simek <monstr@monstr.eu>
53700 Date: Tue May 8 15:57:43 2007 +0200
53702 add: reading special purpose registers
53704 commit 1a50f164beb065f360fbddb76029607d6b099698
53705 Author: Michal Simek <monstr@monstr.eu>
53706 Date: Tue May 8 14:52:52 2007 +0200
53708 add: Microblaze V5 exception handling
53710 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
53711 Author: Michal Simek <monstr@monstr.eu>
53712 Date: Tue May 8 14:39:11 2007 +0200
53714 add: FSL control read and write
53716 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
53717 Author: Piotr Kruszynski <ppk@semihalf.com>
53718 Date: Tue May 8 13:05:44 2007 +0200
53720 [Motion-PRO] Add support for I2C, EEPROM and RTC.
53722 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
53723 Author: Bartlomiej Sieka <tur@semihalf.com>
53724 Date: Tue May 8 10:23:56 2007 +0200
53726 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
53729 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
53730 Author: Bartlomiej Sieka <tur@semihalf.com>
53731 Date: Tue May 8 09:39:12 2007 +0200
53733 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
53734 eliminates networking problems in Linux (timeouts).
53736 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
53737 Author: Bartlomiej Sieka <tur@semihalf.com>
53738 Date: Tue May 8 09:21:57 2007 +0200
53740 [Motion-PRO] Enable Flat Device Tree support and modify default environment
53741 to allow booting of FDT-expecting kernels.
53743 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
53744 Author: Michal Simek <monstr@monstr.eu>
53745 Date: Mon May 7 23:58:31 2007 +0200
53747 new: USE_MSR_INTR support
53749 commit 008861a2f3ef2c062744d733787c7e530a1b8761
53750 Author: Bartlomiej Sieka <tur@semihalf.com>
53751 Date: Mon May 7 22:36:15 2007 +0200
53753 [MPC5xxx] There are networking problems on the Motion-PRO board with
53754 current PHY initalization code (tftp timeouts all the time). This commit
53755 temporarily disables PHY initalization sequence to make the networking
53756 operational, until a fix is found.
53758 commit abca901869c3760b6c5fecb825db6c1d91a78a93
53759 Author: Wolfgang Denk <wd@denx.de>
53760 Date: Mon May 7 22:10:36 2007 +0200
53762 Get rid of duplicated file (see include/configs/sbc8560.h instead)
53764 Signed-off-by: Wolfgang Denk <wd@denx.de>
53766 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
53767 Author: Wolfgang Denk <wd@denx.de>
53768 Date: Mon May 7 22:07:08 2007 +0200
53770 Get rid of duplicated file (see doc/README.SBC8560 instead)
53772 Signed-off-by: Wolfgang Denk <wd@denx.de>
53774 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
53775 Author: Michal Simek <monstr@monstr.eu>
53776 Date: Mon May 7 19:43:10 2007 +0200
53778 fix: read and write MSR - repair number of parameters
53780 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
53781 Author: Jeffrey Mann <mannj@embeddedplanet.com>
53782 Date: Mon May 7 19:42:49 2007 +0200
53784 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
53786 A '3' got cut off in the formatting of the last patch to automatically
53787 change the clock speed of the system clock on sequoia board.
53789 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
53790 Signed-off-by: Stefan Roese <sr@denx.de>
53792 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
53793 Author: Michal Simek <monstr@monstr.eu>
53794 Date: Mon May 7 19:33:51 2007 +0200
53796 new: fsl interrupt support
53797 FSL_Has_data is connected to INTC.
53799 commit 792032baa7d625e34c981ab6df521911bd8dc861
53800 Author: Michal Simek <monstr@monstr.eu>
53801 Date: Mon May 7 19:30:12 2007 +0200
53803 fix: interrupt handler
53806 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
53807 Author: Michal Simek <monstr@monstr.eu>
53808 Date: Mon May 7 19:25:08 2007 +0200
53810 fix: remove asm code
53812 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
53813 Author: Michal Simek <monstr@monstr.eu>
53814 Date: Mon May 7 19:12:43 2007 +0200
53816 fix: clean interrupt
53818 commit 42efed6130c8fcf7da881385b5427065d2801757
53819 Author: Michal Simek <monstr@monstr.eu>
53820 Date: Mon May 7 17:22:25 2007 +0200
53822 fix: interrupt handler for multiple sources
53824 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
53825 Author: Michal Simek <monstr@monstr.eu>
53826 Date: Mon May 7 17:11:09 2007 +0200
53828 new: add writing to msr register
53830 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
53831 Author: Markus Klotzbuecher <mk@denx.de>
53832 Date: Mon May 7 16:43:56 2007 +0200
53834 Fix an ancient CHANGELOG conflict
53836 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
53837 Author: Timur Tabi <timur@freescale.com>
53838 Date: Sat May 5 08:12:30 2007 +0200
53840 5xxx: write MAC address to mac-address and local-mac-address
53842 Some device trees have a mac-address property, some have local-mac-address,
53843 and some have both. To support all of these device trees, ftp_cpu_setup()
53844 should write the MAC address to mac-address and local-mac-address, if they
53847 Signed-off-by: Timur Tabi <timur@freescale.com>
53848 Acked-by: Grant Likely <grant.likely@secretlab.ca>
53850 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
53851 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
53852 Date: Sun Apr 29 14:01:54 2007 +0200
53854 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
53856 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
53857 message. Use PVR to distinguish between the two variants, and print proper CPU
53860 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
53861 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
53862 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
53864 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
53865 Author: Ladislav Michl <ladis@linux-mips.org>
53866 Date: Wed Apr 25 16:01:26 2007 +0200
53868 [PATCH] simplify silent console
53870 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
53871 Acked-by: Stefan Roese <sr@denx.de>
53873 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
53874 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
53875 Date: Mon Apr 23 15:30:39 2007 +0200
53877 [PATCH] Avoid assigning PCI resources from zero address
53879 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
53880 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
53881 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
53882 sentence about "0" being considered an invalid address) -- so, use a reasonable
53883 starting value of 0x1000 (that's what the most Linux archs are using).
53885 Alternatively, one might have fixed the calls to pci_set_region() individually
53886 (some code even seems to have taken care of this issue) but that would have
53887 been a lot more work. :-)
53889 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
53890 Acked-by: Stefan Roese <sr@denx.de>
53892 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
53893 Author: Jeffrey Mann <mannj@embeddedplanet.com>
53894 Date: Mon Apr 23 14:00:11 2007 +0200
53896 [patch] setenv(...) can delete environmentalvariables
53898 update setenv() function so that entering a NULL value for the
53899 variable's value will delete the environmental variable
53901 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
53902 Acked-by: Stefan Roese <sr@denx.de>
53904 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
53905 Author: Mike Frysinger <vapier@gentoo.org>
53906 Date: Mon Apr 23 13:54:24 2007 +0200
53908 [patch] use unsigned char in smc91111 driver for mac
53910 the v_mac variable in the smc91111 driver is declared as a signed char ...
53911 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
53912 because when it gets printed out, you get a display like:
53913 0xFFFFFFE0 and that's no good
53915 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
53917 commit ffc50f9bb194343c6303517a517708457a5eb6b8
53918 Author: Michal Simek <monstr@monstr.eu>
53919 Date: Sat May 5 18:54:42 2007 +0200
53921 new: FSL and MSR support #2
53923 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
53924 Author: Michal Simek <monstr@monstr.eu>
53925 Date: Sat May 5 18:27:16 2007 +0200
53927 new: FSL and MSR support
53929 commit 2f15278c2eb911c668b4fe562130b78cf554d139
53930 Author: Wolfgang Denk <wd@denx.de>
53931 Date: Sat May 5 18:23:11 2007 +0200
53933 Coding stylke cleanup; update CHANGELOG.
53935 Signed-off-by: Wolfgang Denk <wd@denx.de>
53937 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
53938 Author: Wolfgang Denk <wd@denx.de>
53939 Date: Sat May 5 18:05:02 2007 +0200
53941 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
53943 Signed-off-by: Wolfgang Denk <wd@denx.de>
53945 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
53946 Author: Wolfgang Denk <wd@denx.de>
53947 Date: Sat May 5 17:15:50 2007 +0200
53949 Make "file" command happy with some config.mk files; update CHANGELOG
53951 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
53952 Author: Jeffrey Mann <mannj@embeddedplanet.com>
53953 Date: Sat May 5 08:32:14 2007 +0200
53955 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
53957 The AMCC Secquoia board has been changed in a new revision from using a
53958 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
53959 indicates the difference. This patch reads that bit and uses the correct
53960 clock speed for the board. This code is backward compatable will all
53961 prior boards. All prior boards will be read as 33.000.
53963 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
53964 Signed-off-by: Stefan Roese <sr@denx.de>
53966 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
53967 Author: Stefan Roese <sr@denx.de>
53968 Date: Sat May 5 08:29:01 2007 +0200
53970 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
53972 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
53973 for the 4k NAND boot image so define bus_frequency to 133MHz here
53974 which is save for the refresh counter setup.
53976 Signed-off-by: Stefan Roese <sr@denx.de>
53978 commit 2f550ab976405300f5b07bf2890800840d0aa05f
53979 Author: Timur Tabi <timur@freescale.com>
53980 Date: Sat May 5 08:12:30 2007 +0200
53982 5xxx: write MAC address to mac-address and local-mac-address
53984 Some device trees have a mac-address property, some have local-mac-address,
53985 and some have both. To support all of these device trees, ftp_cpu_setup()
53986 should write the MAC address to mac-address and local-mac-address, if they
53989 Signed-off-by: Timur Tabi <timur@freescale.com>
53990 Acked-by: Grant Likely <grant.likely@secretlab.ca>
53992 commit a79886590593ba1d667c840caa4940c61639f18f
53993 Author: Thomas Knobloch <knobloch@siemens.com>
53994 Date: Sat May 5 07:04:42 2007 +0200
53996 NAND: Wrong calculation of page number in nand_block_bad()
53998 In case that there is no memory based bad block table available the
53999 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
54000 nand_block_bad() directly. When parameter 'getchip' is set to zero,
54001 nand_block_bad() will not right shift the offset to calculate the
54002 correct page number.
54004 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
54005 Signed-off-by: Stefan Roese <sr@denx.de>
54007 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
54008 Author: Wolfgang Denk <wd@denx.de>
54009 Date: Fri May 4 10:02:33 2007 +0200
54011 Fix initrd length corruption in bootm command.
54013 When using FDT Images, the length of an inital ramdisk was
54014 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
54016 Patches by Timur Tabi & Johns Daniel.
54018 Signed-off-by: Wolfgang Denk <wd@denx.de>
54020 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
54021 Author: Kim Phillips <kim.phillips@freescale.com>
54022 Date: Thu May 3 19:43:52 2007 -0500
54024 mpc83xx: fix trivial error in MAKEALL
54026 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
54028 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
54029 Author: Wolfgang Denk <wd@denx.de>
54030 Date: Thu May 3 16:34:41 2007 +0200
54032 Update board configuration for STX GP3SSA board:
54034 Enable hush shell, environment in flash rather in EEPROM,
54035 more user-friendly default environment, etc.
54036 The simple EEPROM environment can be selected easily in the board
54039 Signed-off-by: Wolfgang Denk <wd@denx.de>
54041 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
54042 Author: Wolfgang Denk <wd@denx.de>
54043 Date: Tue Apr 24 14:37:49 2007 +0200
54045 Cleanup STX GP3SSA code; fix build and compile problems.
54047 commit 35171dc04e028ecacc23ad916a66295472555dbf
54048 Author: Dan Malek <dan@embeddedalley.com>
54049 Date: Fri Jan 5 09:15:34 2007 +0100
54051 Add support for STX GP3SSA (stxssa) Board
54053 Signed-off-by Dan Malek, <dan@embeddedalley.com>
54055 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
54056 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54057 Date: Wed May 2 13:31:53 2007 +0200
54059 macb: Don't restart autonegotiation if we already have link
54061 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
54062 link is already up.
54064 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54066 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
54067 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54068 Date: Wed May 2 13:22:38 2007 +0200
54070 macb: Introduce a few barriers when dealing with DMA descriptors
54072 There were a few theoretical possibilities that the compiler might
54073 optimize away DMA descriptor reads and/or writes and thus cause
54074 synchronization problems with the hardware. Insert barriers where
54075 we depend on reads/writes actually hitting memory.
54077 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54079 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
54080 Author: Andy Fleming <afleming@freescale.com>
54081 Date: Sat Feb 24 01:08:13 2007 -0600
54083 Cleaned up some 85xx PCI bugs
54085 * Cleaned up the CDS PCI Config Tables and added NULL entries to
54087 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
54088 * Fixed 85xx PCI code to assign powar region sizes based on the
54089 config values (rather than hard-coding them)
54090 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
54092 Signed-off-by: Andy Fleming <afleming@freescale.com>
54094 commit 6743105988fc44d5b0d30388c790607835aae7a6
54095 Author: Andy Fleming <afleming@freescale.com>
54096 Date: Mon Apr 23 02:54:25 2007 -0500
54098 Add support for the 8568 MDS board
54100 This included some changes to common files:
54101 * Add 8568 processor SVR to various places
54102 * Add support for setting the qe bus-frequency value in the dts
54103 * Add the 8568MDS target to the Makefile
54105 Signed-off-by: Andy Fleming <afleming@freescale.com>
54107 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
54108 Author: David Updegraff <dave@cray.com>
54109 Date: Fri Apr 20 14:34:48 2007 -0500
54111 Add support for treating unknown PHYs as generic PHYs.
54113 When bringing up u-boot on new boards, PHY support sometimes gets
54114 neglected. Most PHYs don't really need any special support,
54115 though. By adding a generic entry that always matches if nothing
54116 else does, we can provide support for "unsupported" PHYs for the
54119 The generic PHY driver supports most PHYs, including gigabit.
54121 Signed-off-by: David Updegraff <dave@cray.com>
54122 Signed-off-by: Andy Fleming <afleming@freescale.com>
54124 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
54125 Author: James Yang <James.Yang@freescale.com>
54126 Date: Wed Feb 7 15:28:04 2007 -0600
54128 Conditionalize 8641 Rev1.0 MCM workarounds
54130 Signed-off-by: James Yang <James.Yang@freescale.com>
54131 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54133 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
54134 Author: Timur Tabi <timur@freescale.com>
54135 Date: Mon Apr 30 13:59:50 2007 -0500
54137 Fix memory initialization on MPC8349E-mITX
54139 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
54140 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
54141 on some ITX boards, notably those with a revision 3.1 CPU.
54143 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
54144 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
54146 Signed-off-by: Timur Tabi <timur@freescale.com>
54147 Acked-by: Michael Benedict <MBenedict@twacs.com>
54148 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
54150 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
54151 Author: Kim Phillips <kim.phillips@freescale.com>
54152 Date: Mon Apr 30 15:26:21 2007 -0500
54154 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
54156 and fix CPU: to align with Board: display text.
54158 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
54160 commit c1ab82669d9525998c34e802a12cad662723f22a
54161 Author: James Yang <James.Yang@freescale.com>
54162 Date: Fri Mar 16 13:02:53 2007 -0500
54164 Rewrote picos_to_clk() to avoid rounding errors.
54165 Clarified that conversion is to DRAM clocks rather than platform clocks.
54166 Made function static to spd_sdram.c.
54168 Signed-off-by: James Yang <James.Yang@freescale.com>
54169 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54171 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
54172 Author: Stefan Roese <sr@denx.de>
54173 Date: Sun Apr 29 14:13:01 2007 +0200
54175 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
54177 Signed-off-by: Stefan Roese <sr@denx.de>
54179 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
54180 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
54181 Date: Sun Apr 29 14:01:54 2007 +0200
54183 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
54185 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
54186 message. Use PVR to distinguish between the two variants, and print proper CPU
54189 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
54190 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
54191 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
54193 commit 5c5d3242935cf3543af01142627494434834cf98
54194 Author: Kim Phillips <kim.phillips@freescale.com>
54195 Date: Wed Apr 25 12:34:38 2007 -0500
54197 mpc83xx: minor fixups for 8313rdb introduction
54199 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
54200 Author: Ladislav Michl <ladis@linux-mips.org>
54201 Date: Wed Apr 25 16:01:26 2007 +0200
54203 [PATCH] simplify silent console
54205 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
54206 Acked-by: Stefan Roese <sr@denx.de>
54208 commit 144876a380f5756f57412caf74c1d6dc201dd796
54209 Author: Michal Simek <monstr@monstr.eu>
54210 Date: Tue Apr 24 23:01:02 2007 +0200
54212 [PATCH] MTD partition support, JFFS2 support
54214 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
54215 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
54216 Date: Tue Apr 24 14:03:45 2007 +0200
54218 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
54220 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
54222 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
54223 Author: Andy Fleming <afleming@freescale.com>
54224 Date: Mon Apr 23 02:37:47 2007 -0500
54226 Reworked 85xx speed detection code
54228 Changed the code to read the registers and calculate the clock
54229 rates, rather than using a "switch" statement.
54231 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
54233 Signed-off-by: Andy Fleming <afleming@freescale.com>
54235 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
54236 Author: Andy Fleming <afleming@freescale.com>
54237 Date: Mon Apr 23 02:24:28 2007 -0500
54239 Enable 8544 support
54241 * Add support to the Makefile
54242 * Add 8544 configuration support to the tsec driver
54243 * Add 8544 SVR numbers to processor.h
54245 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54246 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54248 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
54249 Author: Andy Fleming <afleming@freescale.com>
54250 Date: Fri Feb 23 17:12:25 2007 -0600
54252 Support 1G size on 8548
54254 e500v2 and newer cores support 1G page sizes.
54256 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54257 Signed-off-by: Andy Fleming <afleming@freescale.com>
54259 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
54260 Author: Andy Fleming <afleming@freescale.com>
54261 Date: Fri Feb 23 17:11:16 2007 -0600
54263 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
54265 The other pagesz constants use one letter to specify order of
54266 magnitude. Also change the one reference to it in mpc8548cds/init.S
54268 Signed-off-by: Andy Fleming <afleming@freescale.com>
54270 commit 1f9a318cea14272edd10d63739e2d326c90f430e
54271 Author: Andy Fleming <afleming@freescale.com>
54272 Date: Fri Feb 23 16:28:46 2007 -0600
54274 Only set ddrioovcr for 8548 rev1.
54276 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54277 Signed-off-by: Andy Fleming <afleming@freescale.com>
54279 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
54280 Author: Andy Fleming <afleming@freescale.com>
54281 Date: Sat Feb 24 01:16:45 2007 -0600
54283 Tweak DDR ECC error counter
54285 Enable single-bit error counter when memory was cleared by ddr controller.
54287 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54288 Signed-off-by: Andy Fleming <afleming@freescale.com>
54290 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
54291 Author: Timur Tabi <timur@freescale.com>
54292 Date: Mon Feb 12 13:34:55 2007 -0600
54294 85xx: write MAC address to mac-address and local-mac-address
54296 Some device trees have a mac-address property, some have local-mac-address,
54297 and some have both. To support all of these device trees, ftp_cpu_setup()
54298 should write the MAC address to mac-address and local-mac-address, if they
54301 Signed-off-by: Timur Tabi <timur@freescale.com>
54303 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
54304 Author: Andy Fleming <afleming@freescale.com>
54305 Date: Mon Apr 23 01:44:44 2007 -0500
54307 Some 85xx cpu cleanups
54309 * Cleaned up the TSR[WIS] clearing
54310 * Cleaned up DMA initialization
54312 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54313 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54314 Acked-by: Andy Fleming <afleming@freescale.com>
54316 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
54317 Author: Andy Fleming <afleming@freescale.com>
54318 Date: Mon Apr 23 01:32:22 2007 -0500
54320 Add cpu support for the 8544
54322 Recognize new SVR values, and add a few register definitions
54324 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54325 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54326 Acked-by: Andy Fleming <afleming@freescale.com>
54328 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
54329 Author: Jon Loeliger <jdl@freescale.com>
54330 Date: Wed Apr 11 16:51:02 2007 -0500
54332 Add MPC8544DS basic port board files.
54334 Add board port under new board/freescale directory
54335 structure and reuse existing PIXIS FPGA support there.
54337 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54338 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54340 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
54341 Author: Jon Loeliger <jdl@freescale.com>
54342 Date: Wed Apr 11 16:50:57 2007 -0500
54344 Add MPC8544DS main configuration file.
54346 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54347 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54349 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
54350 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
54351 Date: Wed Dec 27 22:07:15 2006 +0300
54353 Fix PCI I/O space mapping on Freescale MPC85x0ADS
54355 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
54356 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
54357 describing the local address window used for the PCI I/O space accesses -- fix
54358 this and carry over the necessary changes into the MPC8560ADS code since the
54359 PCI I/O space mapping was also broken for this board (by the earlier commit
54360 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
54361 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
54363 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
54365 board/mpc8540ads/init.S | 4 ++--
54366 board/mpc8560ads/init.S | 4 ++--
54367 include/configs/MPC8540ADS.h | 5 ++---
54368 include/configs/MPC8541CDS.h | 2 +-
54369 include/configs/MPC8548CDS.h | 2 +-
54370 include/configs/MPC8560ADS.h | 8 ++++----
54371 6 files changed, 12 insertions(+), 13 deletions(-)
54373 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
54374 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
54375 Date: Tue Dec 5 16:42:30 2006 +0800
54377 u-boot: Fix e500 v2 core reset bug
54379 The following patch fixes the e500 v2 core reset bug.
54380 For e500 v2 core, a new reset control register is added to reset the
54383 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
54385 commit 63247a5acd58032e6cf33f525bc3923b467bac88
54386 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
54387 Date: Wed Dec 20 11:01:00 2006 +0800
54389 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
54391 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
54392 entry number to control the loop. This can reduce the potential risk
54393 for the 85xx processor increasing its TLB adn LAW entry number.
54395 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
54396 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
54398 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
54399 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
54400 Date: Mon Dec 18 17:01:04 2006 +0800
54402 u-boot: Fix the 85xxcds tsec bug
54404 Fix the 85xxcds tsec bug.
54405 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
54407 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
54409 commit 7337b237ffc4aaf1b9467024fe472a880d852598
54410 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
54411 Date: Fri Dec 15 14:43:31 2006 +0800
54413 u-boot: Fix CPU2 errata on MPC8548CDS board
54415 This patch apply workaround of CPU2 errata on MPC8548CDS board.
54417 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
54419 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
54420 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
54421 Date: Mon Dec 18 16:25:15 2006 +0800
54423 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
54425 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
54427 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
54429 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
54430 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
54431 Date: Thu Dec 14 14:14:55 2006 +0800
54433 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
54435 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
54437 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
54439 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
54440 Author: Scott Wood <scottwood@freescale.com>
54441 Date: Mon Apr 16 14:54:15 2007 -0500
54443 mpc83xx: Add MPC8313ERDB support.
54445 Signed-off-by: Scott Wood <scottwood@freescale.com>
54447 commit 49ea3b6eafe606285ae4d5c378026153dde53200
54448 Author: Scott Wood <scottwood@freescale.com>
54449 Date: Mon Apr 16 14:34:21 2007 -0500
54451 mpc83xx: Add generic PCI setup code.
54453 Board code can now request the generic setup code rather than having to
54454 copy-and-paste it for themselves. Boards should be converted to use this
54455 once they're tested with it.
54457 Signed-off-by: Scott Wood <scottwood@freescale.com>
54459 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
54460 Author: Scott Wood <scottwood@freescale.com>
54461 Date: Mon Apr 16 14:34:19 2007 -0500
54463 mpc83xx: Add 831x support to speed.c.
54465 Signed-off-by: Scott Wood <scottwood@freescale.com>
54467 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
54468 Author: Scott Wood <scottwood@freescale.com>
54469 Date: Mon Apr 16 14:34:18 2007 -0500
54471 mpc83xx: Add 831x support to global_data.h
54473 Signed-off-by: Scott Wood <scottwood@freescale.com>
54475 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
54476 Author: Scott Wood <scottwood@freescale.com>
54477 Date: Mon Apr 16 14:34:16 2007 -0500
54479 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
54481 Rather than misleadingly define PVR_83xx as the specific type of 83xx
54482 being built for, the PVR of each core revision is defined. checkcpu() now
54483 prints the core that it detects, rather than aborting if it doesn't find
54484 what it thinks it wants.
54486 Signed-off-by: Scott Wood <scottwood@freescale.com>
54488 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
54489 Author: Scott Wood <scottwood@freescale.com>
54490 Date: Mon Apr 16 14:34:15 2007 -0500
54492 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
54494 Signed-off-by: Scott Wood <scottwood@freescale.com>
54496 commit d87c57b201b4572d16f1b642998faa00c9912b16
54497 Author: Scott Wood <scottwood@freescale.com>
54498 Date: Mon Apr 16 14:31:55 2007 -0500
54500 mpc83xx: Add register definitions for MPC831x.
54502 Signed-off-by: Scott Wood <scottwood@freescale.com>
54504 commit 7fc4c71a143be8666d70803fb25ae60379c95622
54505 Author: Stefan Roese <sr@denx.de>
54506 Date: Mon Apr 23 15:39:59 2007 +0200
54510 Signed-off-by: Stefan Roese <sr@denx.de>
54512 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
54513 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
54514 Date: Mon Apr 23 15:30:39 2007 +0200
54516 [PATCH] Avoid assigning PCI resources from zero address
54518 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
54519 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
54520 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
54521 sentence about "0" being considered an invalid address) -- so, use a reasonable
54522 starting value of 0x1000 (that's what the most Linux archs are using).
54524 Alternatively, one might have fixed the calls to pci_set_region() individually
54525 (some code even seems to have taken care of this issue) but that would have
54526 been a lot more work. :-)
54528 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
54529 Acked-by: Stefan Roese <sr@denx.de>
54531 commit afb903a2eb9436baa9270ccc0c27082d86497d89
54532 Author: Jeffrey Mann <mannj@embeddedplanet.com>
54533 Date: Mon Apr 23 14:00:11 2007 +0200
54535 [patch] setenv(...) can delete environmentalvariables
54537 update setenv() function so that entering a NULL value for the
54538 variable's value will delete the environmental variable
54540 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
54541 Acked-by: Stefan Roese <sr@denx.de>
54543 commit 36f104e5caa747d568eff26b369565af57c2ffa6
54544 Author: Mike Frysinger <vapier@gentoo.org>
54545 Date: Mon Apr 23 13:54:24 2007 +0200
54547 [patch] use unsigned char in smc91111 driver for mac
54549 the v_mac variable in the smc91111 driver is declared as a signed char ...
54550 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
54551 because when it gets printed out, you get a display like:
54552 0xFFFFFFE0 and that's no good
54554 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
54556 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
54557 Author: Rodolfo Giometti <giometti@enneenne.com>
54558 Date: Mon Apr 23 13:10:52 2007 +0200
54560 USB: (Another) delay for crappy USB keys.
54562 Some USB keys are slow in giving back an answer when the Root HUB
54563 enables power lines.
54565 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
54567 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
54568 Author: Stefan Roese <sr@denx.de>
54569 Date: Mon Apr 23 12:00:22 2007 +0200
54571 Remove BOARDLIBS usage completely
54573 Signed-off-by: Stefan Roese <sr@denx.de>
54575 commit 32556443840f127170e4baa8bdd5b567039f6c36
54576 Author: Michal Simek <monstr@monstr.eu>
54577 Date: Sat Apr 21 21:07:22 2007 +0200
54579 [PATCH] SystemACE support for Microblaze
54581 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
54582 Author: Michal Simek <monstr@monstr.eu>
54583 Date: Sat Apr 21 21:02:40 2007 +0200
54585 16bit read/write little endian
54587 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
54588 Author: Michal Simek <monstr@monstr.eu>
54589 Date: Sat Apr 21 20:53:31 2007 +0200
54591 Change ML401 parameters - Xilinx BSP
54593 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
54594 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
54595 Date: Wed Feb 28 05:37:29 2007 -0600
54597 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
54599 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
54601 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
54602 Author: Zhang Wei <wei.zhang@freescale.com>
54603 Date: Fri Jan 19 10:42:37 2007 +0800
54605 Enable LAWs for MPC8641 PCI-Ex2.
54607 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
54608 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54610 commit bd7851ce1e1f140665b520026abf1042968b1102
54611 Author: Jon Loeliger <jdl@freescale.com>
54612 Date: Fri Apr 20 14:12:26 2007 -0500
54614 mpc86xx; Write MAC address to mac-address and local-mac-address
54616 Some device trees have a mac-address property, some have local-mac-address,
54617 and some have both. To support all of these device trees, ftp_cpu_setup()
54618 should write the MAC address to mac-address and local-mac-address, if they
54621 Signed-off-by: Timur Tabi <timur@freescale.com>
54622 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54624 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
54625 Author: Jon Loeliger <jdl@freescale.com>
54626 Date: Fri Apr 20 14:11:38 2007 -0500
54628 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
54630 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
54631 Signed-off-by: Jon Loeliger <jdl@freescale.com>
54633 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
54634 Author: Wolfgang Denk <wd@denx.de>
54635 Date: Fri Apr 20 17:43:28 2007 +0200
54637 Cleanup compiler warnings, update CHANGELOG
54639 Signed-off-by: Wolfgang Denk <wd@denx.de>
54641 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
54642 Author: Detlev Zundel <dzu@denx.de>
54643 Date: Fri Apr 20 12:01:47 2007 +0200
54645 Fix breakage of NC650 board with respect to nand support.
54647 Signed-off-by: Detlev Zundel <dzu@denx.de>
54649 commit 39f23cd90947639ac278a18ff277ec786b5ac167
54650 Author: Domen Puncer <domen.puncer@telargo.com>
54651 Date: Fri Apr 20 11:13:16 2007 +0200
54653 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
54655 G2 core reference manual says decrementer and time base
54656 are decreasing/increasing once every 4 bus clock cycles.
54657 Lets fix it, so time in Linux won't run twice as fast
54659 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
54660 Acked-by: Grant Likely <grant.likely@secretlab.ca>
54662 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
54663 Author: Gerald Van Baren <vanbaren@cideas.com>
54664 Date: Thu Apr 19 23:14:39 2007 -0400
54666 Fix serious pointer bug with bootm and reserve map.
54668 What was suppose to be a stack variable was declared as a pointer,
54669 overwriting random memory.
54670 Also moved the libfdt.a requirement into the main Makefile. That is
54673 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
54674 Author: Stefan Roese <sr@denx.de>
54675 Date: Thu Apr 19 09:53:52 2007 +0200
54677 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
54679 Previous versions used full wait states for the chip select #1 which
54680 is connected to the Xilinix SystemACE controller on the AMCC Katmai
54681 evaluation board. This leads to really slow access and therefore low
54682 performance. This patch now sets up the chip select a lot faster
54683 resulting in much better read/write performance of the Linux driver.
54685 Signed-off-by: Stefan Roese <sr@denx.de>
54687 commit 37837828d89084879bee2f2b8c7c68d4695940df
54688 Author: Wolfgang Denk <wd@denx.de>
54689 Date: Wed Apr 18 17:49:29 2007 +0200
54691 Clenaup, update CHANGELOG
54693 Signed-off-by: Wolfgang Denk <wd@denx.de>
54695 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
54696 Author: Wolfgang Denk <wd@denx.de>
54697 Date: Wed Apr 18 17:20:58 2007 +0200
54701 Signed-off-by: Wolfgang Denk <wd@denx.de>
54703 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
54704 Author: Wolfgang Denk <wd@denx.de>
54705 Date: Wed Apr 18 17:07:26 2007 +0200
54707 Cleanup, update CHANGELOG
54709 Sigend-off-by: Wolfgang Denk <wd@denx.de>
54711 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
54712 Author: Wolfgang Denk <wd@denx.de>
54713 Date: Wed Apr 18 16:17:46 2007 +0200
54717 commit ad4eb555671d97f96dc56eab55103b1f86874b01
54718 Author: Wolfgang Denk <wd@denx.de>
54719 Date: Wed Apr 18 14:30:39 2007 +0200
54721 MCC200 board: remove warning which is obsolete after PSoC firmware changes
54723 Signed-off-by: Wolfgang Denk <wd@denx.de>
54725 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
54726 Author: Domen Puncer <domen.puncer@telargo.com>
54727 Date: Wed Apr 18 12:11:05 2007 +0200
54729 [PATCH] icecube/lite5200b: document wakeup from low-power support
54731 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
54733 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
54734 Author: Stefan Roese <sr@denx.de>
54735 Date: Wed Apr 18 12:07:47 2007 +0200
54737 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
54739 Signed-off-by: Stefan Roese <sr@denx.de>
54741 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
54742 Author: Stefan Roese <sr@denx.de>
54743 Date: Wed Apr 18 12:05:59 2007 +0200
54745 ppc4xx: Add output for bootrom location to 405EZ ports
54747 Now 405EZ ports also show upon bootup from which boot device
54748 they are configured to boot:
54750 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
54752 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
54753 Bootstrap Option E - Boot ROM Location EBC (32 bits)
54754 16 kB I-Cache 16 kB D-Cache
54755 Board: Acadia - AMCC PPC405EZ Evaluation Board
54757 Signed-off-by: Stefan Roese <sr@denx.de>
54759 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
54760 Author: Peter Pearse <peter.pearse@arm.com>
54761 Date: Tue Apr 17 13:30:33 2007 +0100
54763 Move ppearse to ARM board list
54764 Add Konstantin Kletschke for scb9328.
54765 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
54767 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
54768 Author: Domen Puncer <domen.puncer@telargo.com>
54769 Date: Mon Apr 16 14:00:13 2007 +0200
54771 [PATCH] icecube/lite5200b: wakeup from low-power support
54773 U-Boot part of Lite5200b low power mode support.
54774 Puts SDRAM out of self-refresh and transfers control to
54775 address saved at physical 0x0.
54777 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
54778 Acked-by: Grant Likely <grant.likely@secretlab.ca>
54780 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
54781 Author: Gerald Van Baren <vanbaren@cideas.com>
54782 Date: Sun Apr 15 13:54:26 2007 -0400
54784 Fix the ft_cpu_setup() property settings.
54786 Use "setter" functions instead of flags, cleaner and more flexible.
54787 It also fixes the problem noted by Timur Tabi that the ethernet MAC
54788 addresses were all being set incorrectly to the same MAC address.
54790 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
54791 Author: Gerald Van Baren <vanbaren@cideas.com>
54792 Date: Sat Apr 14 22:51:24 2007 -0400
54794 Improve the bootm command for CONFIG_OF_LIBFDT
54796 In bootm, create the "/chosen" node only if it doesn't already exist
54797 (better matches the previous behavior).
54798 Update for proper reserved memory map handling for initrd.
54800 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
54801 Author: Gerald Van Baren <vanbaren@cideas.com>
54802 Date: Sat Apr 14 22:46:41 2007 -0400
54804 Add some utilities to manipulate the reserved memory map.
54806 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
54807 Author: Wolfgang Denk <wd@denx.de>
54808 Date: Sat Apr 14 21:16:54 2007 +0200
54812 commit 8e6875183cdca91c134408d119d4abcd48ef6856
54813 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54814 Date: Sun Dec 17 18:56:46 2006 +0100
54816 AVR32: Enable MMC support
54818 Set up the portmux for the MMC interface and enable the MMC driver
54819 along with support for DOS partitions, ext2 and FAT filesystems.
54821 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54823 commit fc26c97bb6df41b4a95662c34054fe912387bf38
54824 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54825 Date: Fri Jan 20 10:03:53 2006 +0100
54829 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
54831 The AT91 ARM-based CPUs use basically the same hardware, so it should
54832 be possible to share this driver, but no effort has been made so far.
54834 Hardware documentation can be found in the AT32AP7000 data sheet,
54835 which can be downloaded from
54837 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
54839 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54841 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
54842 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54843 Date: Sun Dec 17 18:55:37 2006 +0100
54845 AVR32: Add clk and gpio infrastructure for mmci
54847 Implement functions for configuring the mmci pins, as well as
54848 functions for getting the clock rate of the mmci controller.
54850 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54852 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
54853 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54854 Date: Sun Dec 17 18:53:56 2006 +0100
54856 Enable partition support with MMC
54858 Include implementations of init_part() and get_partition_info() when
54861 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54863 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
54864 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54865 Date: Sun Dec 17 17:14:30 2006 +0100
54867 AVR32: Enable networking
54869 Implement MACB initialization for AVR32 and ATSTK1000, and turn
54870 everything on, including the MACB driver.
54872 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54874 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
54875 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54876 Date: Fri Jan 20 10:03:34 2006 +0100
54878 Atmel MACB ethernet driver
54880 Driver for the Atmel MACB on-chip ethernet controller.
54882 This driver has been tested on the ATSTK1000 board with a AT32AP7000
54883 CPU. It should probably work on AT91SAM926x as well with some minor
54886 Hardware documentation can be found in the AT32AP7000 data sheet,
54887 which can be downloaded from
54889 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
54891 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54893 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
54894 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54895 Date: Sun Dec 17 16:56:14 2006 +0100
54897 AVR32: Add clk and gpio infrastructure for macb0 and macb1
54899 Implement functions for configuring the macb0 and macb1 pins, as
54900 well as functions for getting the clock rate of the various
54901 busses the macb ethernet controllers are connected to.
54903 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54905 commit d5acb95b16a0a74c643524342c3437e765426d05
54906 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54907 Date: Sun Dec 17 15:39:15 2006 +0100
54909 AVR32: Implement simple DMA memory allocator
54911 Implement dma_alloc_coherent() which returns cache-aligned
54912 uncacheable memory.
54914 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54916 commit 91975b0fea773c9e681fea8cf3349669f27685ee
54917 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54918 Date: Sun Dec 17 15:46:02 2006 +0100
54920 Import <linux/mii.h> from the Linux kernel
54922 Instead of creating yet another set of MII register definitions
54923 in the macb driver, here's a complete set of definitions for everyone
54926 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54928 commit 1b804b229556a4d862da93c0ec94e79419364b2c
54929 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54930 Date: Wed Mar 21 19:47:36 2007 +0100
54932 AVR32: Include more commands for ATSTK1000
54934 Include the imi, imls and jffs commands sets by default on ATSTK1000.
54935 Also define CONFIG_BOOTARGS to something more useful, define
54936 CONFIG_BOOTCOMMAND and enable autoboot by default.
54938 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54940 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
54941 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54942 Date: Wed Mar 21 19:44:48 2007 +0100
54944 AVR32: Provide a definition of struct stat
54946 Copy the definition of struct stat from the Linux kernel.
54948 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54950 commit 12f099c08167a7a51aeee623bc16dafd0841271c
54951 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54952 Date: Sun Dec 17 14:46:06 2006 +0100
54954 AVR32: Use initdram() instead of board_init_memories()
54956 Conform to the "standard" interface and use initdram() instead of
54957 board_init_memories() on AVR32. This enables us to get rid of the
54958 sdram_size member of the global_data struct as well.
54960 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54962 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
54963 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54964 Date: Mon Nov 20 15:53:10 2006 +0100
54966 AVR32: Relocate u-boot to SDRAM
54968 Relocate the u-boot image into SDRAM like everyone else does. This
54969 means that we can handle much larger .data and .bss than we used to.
54971 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54973 commit df548d3c3e2bbc40258713167859ffc2ce99a900
54974 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54975 Date: Sun Nov 19 18:06:53 2006 +0100
54977 AVR32: Resource management rewrite
54979 Rewrite the resource management code (i.e. I/O memory, clock gating,
54980 gpio) so it doesn't depend on any global state. This is necessary
54981 because this code is heavily used before relocation to RAM, so we
54982 can't write to any global variables.
54984 As an added bonus, this makes u-boot's memory footprint a bit smaller,
54985 although some functionality has been left out; all clocks are enabled
54986 all the time, and there's no checking for gpio line conflicts.
54988 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
54990 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
54991 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
54992 Date: Sat Nov 18 18:01:13 2006 +0100
54994 AVR32: Clean up memory-map.h for at32ap7000
54996 Convert spaces to tabs (must have missed this one last time around),
54997 sort the entries by address and group them together by bus
55000 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55002 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
55003 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55004 Date: Sat Nov 18 17:32:31 2006 +0100
55006 AVR32: Build position-independent u-boot
55008 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
55009 position independent. This will make relocation a lot easier.
55011 -mno-init-got means that gcc shouldn't emit code to load the GOT
55012 address into r6 in every function prologue. We do it once and for
55013 all in the early startup assembly code, so enabling this option
55014 makes u-boot a bit faster and smaller.
55016 The assembly parts have always been position-independent, so no code
55017 changes should be necessary.
55019 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55021 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
55022 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55023 Date: Sat Nov 18 17:24:31 2006 +0100
55025 AVR32: Use avr32-linux- cross-compilation prefix by default
55027 It doesn't really matter which toolchain you use to compile u-boot,
55028 but the avr32-linux one is probably what most people have installed.
55030 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55032 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
55033 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
55034 Date: Sat Nov 18 17:15:30 2006 +0100
55036 AVR32: Split start_u_boot into board_init_f and board_init_r
55038 Split the avr32 initialization code into a function to run before
55039 relocation, board_init_f and a function to run after relocation,
55040 board_init_r. For now, board_init_f simply calls board_init_r
55043 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
55045 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
55046 Author: Heiko Schocher <hs@pollux.denx.de>
55047 Date: Sat Apr 14 05:26:48 2007 +0200
55049 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
55050 clear the Display after reset.
55052 Signed-off-by: Heiko Schocher <hs@denx.de>
55054 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
55055 Author: Denis Peter <d.peter@mpl.ch>
55056 Date: Fri Apr 13 09:13:33 2007 +0200
55058 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
55060 Fix bug introduced by "Fix get_partition_info() parameter error in all
55061 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
55062 to use diskboot or scsiboot form another device than 0.
55064 Signed-off-by: Denis Peter <d.peter@mpl.ch>
55066 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
55067 Author: Greg Lopp <lopp@pobox.com>
55068 Date: Fri Apr 13 08:02:24 2007 +0200
55070 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
55072 Signed-of-by: Greg Lopp <lopp@pobox.com>
55073 Acked-by: Grant Likely <grant.likely@secretlab.ca>
55075 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
55076 Author: Xie Xiaobo <r63061@freescale.com>
55077 Date: Fri Mar 9 19:08:25 2007 +0800
55079 Fix two bugs for MPC83xx DDR2 controller SPD Init
55081 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
55082 the first bug is that the picos_to_clk routine introduces a huge
55083 rounding error in 83xx.
55084 the second bug is that the mode register write recovery field is
55085 tWR-1, not tWR >> 1.
55087 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
55088 Author: Jeffrey Mann <mannj@embeddedplanet.com>
55089 Date: Thu Apr 12 14:15:59 2007 +0200
55091 ppc4xx: Fix i2c divisor calcularion for PPC4xx
55093 This patch fixes changes the i2c_init(...) function to use the function
55094 get_OPB_freq() rather than calculating the OPB speed by
55095 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
55096 specific per processor. The prior method was not and so was calculating
55097 the wrong speed for some PPC4xx processors.
55099 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
55100 Signed-off-by: Stefan Roese <sr@denx.de>
55102 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
55103 Author: Wolfgang Denk <wd@denx.de>
55104 Date: Wed Apr 11 17:25:01 2007 +0200
55108 Signed-off-by: Wolfgang Denk <wd@denx.de>
55110 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
55111 Author: Wolfgang Denk <wd@denx.de>
55112 Date: Wed Apr 11 17:22:55 2007 +0200
55114 Update for SC3 board
55116 * Make IDE timeout configurable through ide_reset_timeout variable.
55117 * Use Newline as "password" string
55118 * Use just a single partition in NAND flash
55120 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
55121 Author: Haiying Wang <haiying.wang@freescale.com>
55122 Date: Mon Jan 22 12:37:30 2007 -0600
55124 Add PIXIS FPGA support for MPC8641HPCN board.
55126 Move the 8641HPCN's PIXIS code to the new directory
55127 board/freescale/common/ as it will be shared by
55128 future boards not in the same processor family.
55130 Write a "pixis_reset" command that utilizes the FPGA
55131 reset sequencer to support alternate soft-reset options
55132 such as using the "alternate" flash bank, enabling
55133 the watch dog, or choosing different CPU frequencies.
55135 Add documentation for the pixis_reset to README.mpc8641hpcn.
55137 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
55138 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55140 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
55141 Author: Gerald Van Baren <vanbaren@cideas.com>
55142 Date: Fri Apr 6 14:19:43 2007 -0400
55144 Moved fdt command support code to fdt_support.c
55146 ...in preparation for improving the bootm command's handling of fdt blobs.
55147 Also cleaned up some coding sloppiness.
55149 commit 6679f9299534e488a171a9bb8f9bb891de247aab
55150 Author: Gerald Van Baren <vanbaren@cideas.com>
55151 Date: Fri Apr 6 14:17:14 2007 -0400
55153 libfdt: Make fdt_check_header() public
55155 Changed _fdt_check_header() to fdt_check_header() and made it part of
55156 the interface - it is a useful routine.
55158 Also did some asthetics cleanup to the include files (headers).
55160 commit c0707ce65677650b5ceab0500ee50ae5168afef2
55161 Author: Aubrey Li <aubrey.adi@gmail.com>
55162 Date: Thu Apr 5 18:34:06 2007 +0800
55164 [Blackfin][PATCH] Kill off a bunch of common local prototypes
55166 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
55167 Author: Aubrey Li <aubrey.adi@gmail.com>
55168 Date: Thu Apr 5 18:33:04 2007 +0800
55170 [Blackfin][PATCH] Fix dynamic CPLB generation issue
55172 commit 0445e3a264251d75b1be45ef713c70726a2952f0
55173 Author: Aubrey Li <aubrey.adi@gmail.com>
55174 Date: Thu Apr 5 18:31:47 2007 +0800
55176 [Blackfin][PATCH] minior cleanup
55178 commit 155fd766573981090e638b493d5857562151862e
55179 Author: Aubrey Li <aubrey.adi@gmail.com>
55180 Date: Thu Apr 5 18:31:18 2007 +0800
55182 [Blackfin][PATCH] Fix copyright and update license
55184 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
55185 Author: Aubrey Li <aubrey.adi@gmail.com>
55186 Date: Thu Apr 5 18:30:25 2007 +0800
55188 [Blackfin][PATCH] Add BF537 EMAC driver initialization
55190 commit 889256e8604e0c68db1d866d720894dffede9df6
55191 Author: Aubrey Li <aubrey.adi@gmail.com>
55192 Date: Thu Apr 5 18:29:55 2007 +0800
55194 [Blackfin][PATCH] call real the system synchronize instruction
55196 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
55197 Author: Aubrey Li <aubrey.adi@gmail.com>
55198 Date: Thu Apr 5 18:29:17 2007 +0800
55200 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
55202 commit dfeeab2cd680df047e68e723b246adf6f33bb556
55203 Author: Aubrey Li <aubrey.adi@gmail.com>
55204 Date: Thu Apr 5 18:28:34 2007 +0800
55206 [Blackfin][PATCH]: fix flash unaligned copy issue
55208 commit 443feb740584e406efa203af909fe2926608e8d5
55209 Author: Igor Marnat <marny@rambler.ru>
55210 Date: Wed Mar 21 09:55:01 2007 +0300
55212 Update usage of 'nc' in README.NetConsole
55214 Added information about usage of NetConsole on systems where the -l and -p
55215 switches are mutually exclusive.
55217 Signed-off-by: Igor Marnat <marny@rambler.ru>
55218 Signed-off-by: Ben Warren <bwarren@qstreams.com>
55220 commit 31c98a88228021b314c89ebb8104fb6473da4471
55221 Author: Wolfgang Denk <wd@denx.de>
55222 Date: Wed Apr 4 02:09:30 2007 +0200
55224 Minor coding style cleanup.
55226 commit 94abd7c0583ebe01e799b25f451201deeaab550d
55227 Author: Wolfgang Denk <wd@denx.de>
55228 Date: Wed Apr 4 01:49:15 2007 +0200
55232 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
55233 Author: Rodolfo Giometti <giometti@enneenne.com>
55234 Date: Tue Apr 3 14:27:18 2007 +0200
55236 Support for the Philips ISP116x HCD (Host Controller Driver)
55238 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
55240 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
55241 Author: Markus Klotzbuecher <mk@denx.de>
55242 Date: Tue Apr 3 14:27:08 2007 +0200
55244 USB: cleanup monahans usb support. Remove dead code.
55246 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
55248 commit a65c5768e5537530bd1780af3d3fddc3113a163c
55249 Author: Stefan Roese <sr@denx.de>
55250 Date: Mon Apr 2 10:09:30 2007 +0200
55252 ppc4xx: Change SysACE address on Katmai
55254 With this new base address of the Xilinx SystemACE controller
55255 the Linux driver will be easier to adapt, since it can now be
55256 mapped via the "normal" ioremap() call.
55258 Signed-off-by: Stefan Roese <sr@denx.de>
55260 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
55261 Author: Gerald Van Baren <vanbaren@cideas.com>
55262 Date: Sat Mar 31 14:30:53 2007 -0400
55264 Fix some minor whitespace violations.
55266 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
55267 Author: Gerald Van Baren <vanbaren@cideas.com>
55268 Date: Sat Mar 31 12:23:51 2007 -0400
55270 Add a flattened device tree (fdt) command (2 of 2)
55272 Modifications to the existing code to support the new fdt command.
55274 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
55275 Author: Gerald Van Baren <vanbaren@cideas.com>
55276 Date: Sat Mar 31 12:22:10 2007 -0400
55278 Add a flattened device tree (fdt) command (1 of 2)
55280 The fdt command uses David Gibson's libfdt library to manipulate as well
55281 as print the flattened device tree. This patch is the new command,
55282 the second part is the modifications to the existing code.
55284 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
55285 Author: Gerald Van Baren <vanbaren@cideas.com>
55286 Date: Sat Mar 31 12:13:43 2007 -0400
55288 libfdt: Enhanced and published fdt_next_tag()
55290 Enhanced the formerly private function _fdt_next_tag() to allow stepping
55291 through the tree, used to produce a human-readable dump, and made
55292 it part of the published interface.
55293 Also added some comments.
55295 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
55296 Author: Gerald Van Baren <vanbaren@cideas.com>
55297 Date: Sat Mar 31 12:05:39 2007 -0400
55299 libfdt: Customizations for use by u-boot.
55301 Changes to David Gibson's original source to fit into u-boot's
55302 environment. No functionality changes.
55304 commit 35748177c64a4a83a00057e93bb33e40278a2a96
55305 Author: Gerald Van Baren <vanbaren@cideas.com>
55306 Date: Sat Mar 31 12:00:56 2007 -0400
55308 libfdt: Import libfdt source (2 of 2)
55310 This adds the applicable libfdt source files (unmodified) and a README
55311 to explain where the source came from.
55313 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
55314 Author: Gerald Van Baren <vanbaren@cideas.com>
55315 Date: Sat Mar 31 11:59:59 2007 -0400
55317 libfdt: Import libfdt source (1 of 2)
55319 This adds the applicable libfdt source files (unmodified) and a README
55320 to explain where the source came from.
55322 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
55323 Author: Stefan Roese <sr@denx.de>
55324 Date: Sat Mar 31 13:16:23 2007 +0200
55326 ppc4xx: Update Katmai bootstrap command
55328 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
55331 Signed-off-by: Stefan Roese <sr@denx.de>
55333 commit cabee756a6532986729477c3cc1ea16ef8517ad2
55334 Author: Stefan Roese <sr@denx.de>
55335 Date: Sat Mar 31 13:15:06 2007 +0200
55337 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
55339 Additional RAM information is now printed upon powerup, like
55340 DDR2 frequency and CAS latency.
55342 Signed-off-by: Stefan Roese <sr@denx.de>
55344 commit 60723803431ac75cad085690789e433d5ab9174e
55345 Author: Stefan Roese <sr@denx.de>
55346 Date: Sat Mar 31 08:48:36 2007 +0200
55348 ppc4xx: Change Yucca config file to support ECC
55350 With the updated 44x DDR2 driver the Yucca board now supports
55351 ECC generation and checking.
55353 Signed-off-by: Stefan Roese <sr@denx.de>
55355 commit 490e5730c674b20d708b783a2c5ffd7208f83873
55356 Author: Stefan Roese <sr@denx.de>
55357 Date: Sat Mar 31 08:47:34 2007 +0200
55359 ppc4xx: Fix "bootstrap" command for Katmai board
55361 The board specific "bootstrap" command is now fixed and can
55362 be used for the AMCC Katmai board to configure different
55363 CPU/PLB/OPB frequencies.
55365 Signed-off-by: Stefan Roese <sr@denx.de>
55367 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
55368 Author: Stefan Roese <sr@denx.de>
55369 Date: Sat Mar 31 08:46:08 2007 +0200
55371 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
55373 Fix a bug in the auto calibration routine. This driver now runs
55374 more reliable with the tested modules. It's also tested with
55375 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
55377 Signed-off-by: Stefan Roese <sr@denx.de>
55379 commit 342cd097be1e7affe82f42ab3da220959a699e64
55380 Author: Michal Simek <monstr@monstr.eu>
55381 Date: Fri Mar 30 22:52:09 2007 +0200
55383 [PATCH] Clean include dependence
55385 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
55386 Author: Michal Simek <monstr@monstr.eu>
55387 Date: Fri Mar 30 22:42:45 2007 +0200
55389 [CLEAN] Remove inefficient Suzaku code
55391 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
55392 Author: Stefan Roese <sr@denx.de>
55393 Date: Wed Mar 28 15:03:16 2007 +0200
55395 Merge some AMCC make targets to keep the top-level Makefile smaller
55397 Signed-off-by: Stefan Roese <sr@denx.de>
55399 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
55400 Author: Stefan Roese <sr@denx.de>
55401 Date: Wed Mar 28 14:52:12 2007 +0200
55403 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
55405 The "old" i2c commands (iprobe, imd...) are now compiled in again,
55406 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
55409 Signed-off-by: Stefan Roese <sr@denx.de>
55411 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
55412 Author: Michal Simek <monstr@monstr.eu>
55413 Date: Tue Mar 27 00:32:16 2007 +0200
55415 PATCH: Resolve GPL license problem
55417 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
55418 Author: Rodolfo Giometti <giometti@enneenne.com>
55419 Date: Mon Mar 26 12:03:36 2007 +0200
55421 PXA: pxa27x USB OHCI support
55423 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
55425 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
55426 Author: Markus Klotzbuecher <mk@denx.de>
55427 Date: Mon Mar 26 11:21:05 2007 +0200
55429 USB: remove the S3C24X0_merge #define, which was introduced while
55430 merging OHCI drivers.
55432 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
55434 commit 1798049522f594013aea29457d46794298c6ae15
55435 Author: Michal Simek <root@monstr.eu>
55436 Date: Mon Mar 26 01:39:07 2007 +0200
55438 Support for XUPV2P board
55440 BSP autoconfig support
55442 commit 0d974d5297349504a2ddfa09314be573b5df320a
55443 Author: Stefan Roese <sr@denx.de>
55444 Date: Sat Mar 24 15:57:09 2007 +0100
55446 [PATCH] Add 4xx GPIO functions
55448 This patch adds some 4xx GPIO functions. It also moves some of the
55449 common code and defines into a common 4xx GPIO header file.
55451 Signed-off-by: Stefan Roese <sr@denx.de>
55453 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
55454 Author: Stefan Roese <sr@denx.de>
55455 Date: Sat Mar 24 15:55:58 2007 +0100
55457 [PATCH] Small Sequoia cleanup
55459 Signed-off-by: Stefan Roese <sr@denx.de>
55461 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
55462 Author: Stefan Roese <sr@denx.de>
55463 Date: Sat Mar 24 15:45:34 2007 +0100
55465 [PATCH] Clean up 40EZ/Acadia support
55467 This patch cleans up all the open issue of the preliminary
55470 Signed-off-by: Stefan Roese <sr@denx.de>
55472 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
55473 Author: Jon Loeliger <jdl@freescale.com>
55474 Date: Tue Dec 12 11:02:20 2006 -0600
55476 Fix 8641HPCN problem with ld version 2.16
55478 (Dot outside sections problem).
55480 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
55482 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55484 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
55485 Author: Haiying Wang <haiying.wang@freescale.com>
55486 Date: Thu Dec 7 10:35:55 2006 -0600
55488 Set Rev 2.x 86xx PIC in mixed mode.
55490 Prevent false interrupt from hanging Linux as MSR[EE] is set
55491 to enable interrupts by changing the PIC out of the default
55492 pass through mode into mixed mode.
55494 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
55495 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55497 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
55498 Author: Jason Jin <jason.jin@freescale.com>
55499 Date: Thu Dec 7 10:32:35 2006 -0600
55501 Add flash cmd function to 8641HPCN ramboot
55503 Also fixes some commmand for 8641 HPCN ramboot case.
55505 Signed-off-by: Jason Jin <jason.jin@freescale.com>
55506 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55508 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
55509 Author: Ed Swarthout <ed.swarthout@freescale.com>
55510 Date: Thu Dec 7 10:34:14 2006 -0600
55512 Add support for 8641 Rev 2 silicon.
55514 Without this patch, I am unable to get to the prompt on rev 2 silicon.
55515 Only set ddrioovcr for rev1.
55517 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
55518 Signed-off-by: Jon Loeliger <jdl@freescale.com>
55520 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
55521 Author: Wolfgang Denk <wd@denx.de>
55522 Date: Thu Mar 22 00:13:12 2007 +0100
55524 Code cleanup / re-insert previous Copyright entries.
55526 Signed-off-by: Wolfgang Denk <wd@denx.de>
55528 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
55529 Author: Wolfgang Denk <wd@denx.de>
55530 Date: Wed Mar 21 23:26:15 2007 +0100
55532 Code cleanup. Update CHANGELOG
55534 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
55535 Author: Stefan Roese <sr@denx.de>
55536 Date: Wed Mar 21 14:54:29 2007 +0100
55538 ppc4xx: Fix file mode of include/configs/acadia.h
55540 Signed-off-by: Stefan Roese <sr@denx.de>
55542 commit d5f4614c9350d9333e575100fb250aab774d0258
55543 Author: Markus Klotzbuecher <mk@denx.de>
55544 Date: Wed Mar 21 14:41:46 2007 +0100
55546 SPC1920: fix small clock routing bug
55548 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
55550 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
55551 Author: Stefan Roese <sr@denx.de>
55552 Date: Wed Mar 21 13:39:57 2007 +0100
55554 [PATCH] Add AMCC Acadia (405EZ) eval board support
55556 This patch adds support for the new AMCC Acadia eval board.
55558 Please note that this Acadia/405EZ support is still in a beta stage.
55559 Still lot's of cleanup needed but we need a preliminary release now.
55561 Signed-off-by: Stefan Roese <sr@denx.de>
55563 commit e01bd218b00af73499331a1a701625a852cd286f
55564 Author: Stefan Roese <sr@denx.de>
55565 Date: Wed Mar 21 13:38:59 2007 +0100
55567 [PATCH] Add AMCC PPC405EZ support
55569 This patch adds support for the new AMCC 405EZ PPC. It is in
55570 preparation for the AMCC Acadia board support.
55572 Please note that this Acadia/405EZ support is still in a beta stage.
55573 Still lot's of cleanup needed but we need a preliminary release now.
55575 Signed-off-by: Stefan Roese <sr@denx.de>
55577 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
55578 Author: Heiko Schocher <hs@pollux.denx.de>
55579 Date: Wed Mar 21 08:45:17 2007 +0100
55581 [PATCH] TQM8272: dont change the bits given from the HRCW
55582 for the SIUMCR and BCR Register.
55583 Fix the calculation for the EEprom Size
55585 Signed-off-by: Heiko Schocher <hs@denx.de>
55587 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
55588 Author: Aubrey Li <aubrey.adi@gmail.com>
55589 Date: Tue Mar 20 18:16:24 2007 +0800
55591 [Blackfin][PATCH] Add BF561 EZKIT board support
55593 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
55594 Author: Aubrey Li <aubrey.adi@gmail.com>
55595 Date: Mon Mar 19 22:55:58 2007 +0800
55597 [Blackfin][PATCH] minor cleanup
55599 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
55600 Author: Wolfgang Denk <wd@denx.de>
55601 Date: Mon Mar 19 13:10:08 2007 +0100
55603 Remove obsoleted POST files.
55605 Signed-off-by: Wolfgang Denk <wd@denx.de>
55607 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
55608 Author: Aubrey Li <aubrey.adi@gmail.com>
55609 Date: Mon Mar 19 01:26:11 2007 +0800
55611 [PATCH] Add flash chip M29W320ET/B support
55613 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
55614 Author: Aubrey Li <aubrey.adi@gmail.com>
55615 Date: Mon Mar 19 01:24:52 2007 +0800
55617 [Blackfin][PATCH] Add BF537 stamp board support
55619 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
55620 Author: Stefan Roese <sr@denx.de>
55621 Date: Fri Mar 16 21:11:42 2007 +0100
55623 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
55625 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
55626 DDR memory are dynamically programmed matching the total size
55627 of the equipped memory (DIMM modules).
55629 Signed-off-by: Stefan Roese <sr@denx.de>
55631 commit 76d1466f918b881cda2d259254761e73885093c2
55632 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55633 Date: Tue Mar 13 13:38:05 2007 +0100
55635 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
55636 boards in terms of unification.
55638 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55640 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
55641 Author: Wolfgang Denk <wd@denx.de>
55642 Date: Tue Mar 13 16:05:55 2007 +0100
55644 Make SC3 board build with 'make O='; use 'addcons' consistently
55645 (SC3 and Jupiter used to use 'addcon' instead).
55647 Signed-off-by: Wolfgang Denk wd@denx.de
55649 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
55650 Author: Heiko Schocher <hs@pollux.denx.de>
55651 Date: Tue Mar 13 09:40:59 2007 +0100
55653 [PATCH] update board config for jupiter Board:
55655 CONFIG_CMDLINE_EDITING,
55656 CFG_ENV_ADDR_REDUND activated
55658 Signed-off-by: Heiko Schocher <hs@denx.de>
55660 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
55661 Author: Aubrey Li <aubrey.adi@gmail.com>
55662 Date: Mon Mar 12 12:11:55 2007 +0800
55664 [Blackfin][PATCH] minor cleanup
55666 commit bfa5754a58477ac917d21527cd0f079d87cf188e
55667 Author: Aubrey Li <aubrey.adi@gmail.com>
55668 Date: Mon Mar 12 01:42:06 2007 +0800
55670 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
55672 commit 8440bb14581a294375c34b91b42512f9753d1130
55673 Author: Aubrey Li <aubrey.adi@gmail.com>
55674 Date: Mon Mar 12 00:25:14 2007 +0800
55676 [Blackfin][PATCH] code cleanup
55678 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
55679 Author: Michal Simek <monstr@monstr.eu>
55680 Date: Sun Mar 11 13:48:24 2007 +0100
55682 [Microblaze][PATCH] part 2
55684 interrupt controller support
55688 board information support
55690 booting image support
55692 adding support for Xilinx ML401
55694 commit 76316a318de91f6184e7c22a10e02d275ade2441
55695 Author: Michal Simek <monstr@monstr.eu>
55696 Date: Sun Mar 11 13:42:58 2007 +0100
55698 [Microblaze][PATCH]
55700 interrupt controller support
55704 board information support
55706 booting image support
55708 adding support for Xilinx ML401
55710 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
55711 Author: Aubrey Li <aubrey.adi@gmail.com>
55712 Date: Sat Mar 10 23:49:29 2007 +0800
55714 [Blackfin][PATCH] code cleanup
55716 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
55717 Author: Aubrey.Li <aubrey.adi@gmail.com>
55718 Date: Fri Mar 9 13:40:56 2007 +0800
55720 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
55722 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
55723 Author: Aubrey.Li <aubrey.adi@gmail.com>
55724 Date: Fri Mar 9 13:38:44 2007 +0800
55726 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
55728 commit 992423ab43c2bcf6b704853bd00af77450915e20
55729 Author: Stefan Roese <sr@denx.de>
55730 Date: Thu Mar 8 23:00:08 2007 +0100
55732 ppc4xx: Fix file mode of sequoia.c
55734 Signed-off-by: Stefan Roese <sr@denx.de>
55736 commit eb92f613556800f7483666db09d9a237ad911d4a
55737 Author: Wolfgang Denk <wd@pollux.denx.de>
55738 Date: Thu Mar 8 22:52:51 2007 +0100
55742 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
55743 Author: John Otken john@softadvances.com <john@softadvances.com>
55744 Date: Thu Mar 8 09:39:48 2007 -0600
55746 ppc4xx: Clear Sequoia/Rainier security engine reset bits
55748 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
55750 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
55751 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55752 Date: Thu Mar 8 16:26:52 2007 +0100
55754 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
55756 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55758 commit d9fc703246840c4b268debf48c334ba55c597dc0
55759 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55760 Date: Thu Mar 8 16:25:47 2007 +0100
55762 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
55764 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55766 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
55767 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55768 Date: Thu Mar 8 16:23:11 2007 +0100
55770 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
55772 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55774 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
55775 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55776 Date: Thu Mar 8 16:20:32 2007 +0100
55778 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
55780 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55782 commit f9fc6a5852a6335840882fa2111925010eea1abe
55783 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55784 Date: Wed Mar 7 15:32:01 2007 +0100
55786 fixed ethernet phy configuration for plu405 board
55788 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
55790 commit 769104c9356594deb2092e204a39c05b33202d6c
55791 Author: Wolfgang Denk <wd@pollux.denx.de>
55792 Date: Thu Mar 8 21:49:27 2007 +0100
55796 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
55797 Author: Stefan Roese <sr@denx.de>
55798 Date: Thu Mar 8 10:13:16 2007 +0100
55800 [PATCH] Update AMCC Luan 440SP eval board support
55802 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
55803 inititializition. This includes DDR auto calibration and support
55804 for different DIMM modules, instead of the fixed setup used in
55805 the earlier version.
55807 This patch also enables the cache in FLASH for the startup
55808 phase of U-Boot (while running from FLASH). After relocating to
55809 SDRAM the cache is disabled again. This will speed up the boot
55810 process, especially the SDRAM setup, since there are some loops
55811 for memory testing (auto calibration).
55813 Signed-off-by: Stefan Roese <sr@denx.de>
55815 commit 2f5df47351910a2936c7741cf111855829200943
55816 Author: Stefan Roese <sr@denx.de>
55817 Date: Thu Mar 8 10:10:18 2007 +0100
55819 [PATCH] Update AMCC Yucca 440SPe eval board support
55821 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
55822 inititializition. This includes DDR auto calibration and support
55823 for different DIMM modules, instead of the fixed setup used in
55824 the earlier version.
55826 Signed-off-by: Stefan Roese <sr@denx.de>
55828 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
55829 Author: Stefan Roese <sr@denx.de>
55830 Date: Thu Mar 8 10:07:18 2007 +0100
55832 ppc4xx: Small AMCC Katmai 440SPe update
55834 Signed-off-by: Stefan Roese <sr@denx.de>
55836 commit df294497479b1dca6dd86318b2a912f72fede0df
55837 Author: Stefan Roese <sr@denx.de>
55838 Date: Thu Mar 8 10:06:09 2007 +0100
55840 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
55842 Signed-off-by: Stefan Roese <sr@denx.de>
55844 commit 83853178bd36bca6f0f8f1331476620c84a587fc
55845 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
55846 Date: Wed Mar 7 12:14:50 2007 -0600
55848 net - Support ping reply when processing net-loop
55850 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
55852 This permits the ping command to test the phy interface when the phy
55853 is put in loopback mode (typically by setting register 0 bit 14).
55855 It also allows the port to respond to an external ping when u-boot is
55856 processing some other net command (such as tftp). This is useful when
55857 tftp appears to hang.
55859 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
55860 Signed-off-by: Ben Warren <bwarren@qstreams.com>
55862 commit fa1aef15bcd47736687be1af544506e90fba545d
55863 Author: Stefan Roese <sr@denx.de>
55864 Date: Wed Mar 7 16:43:00 2007 +0100
55866 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
55868 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
55869 DDR memory are dynamically programmed matching the total size
55870 of the equipped memory (DIMM modules).
55872 Signed-off-by: Stefan Roese <sr@denx.de>
55874 commit e2ebe696818939e2b974628be9c921ea3fe9de13
55875 Author: Stefan Roese <sr@denx.de>
55876 Date: Wed Mar 7 16:39:36 2007 +0100
55878 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
55880 This patch fixes a problem that occurs when 2 DIMM's are
55881 used. This problem was first spotted and fixed by Gerald Jackson
55882 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
55883 problem in a little more clever way.
55885 This patch also adds the nice functionality to dynamically
55886 create the TLB entries for the SDRAM (tlb.c). So we should
55887 never run into such problems with wrong (too short) TLB
55888 initialization again on these platforms.
55890 As this feature is new to the "old" 44x SPD DDR driver, it
55891 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
55893 Signed-off-by: Stefan Roese <sr@denx.de>
55895 commit 39218433983417b9df087976a79e3f80dd5e83d6
55896 Author: Wolfgang Denk <wd@denx.de>
55897 Date: Wed Mar 7 16:33:44 2007 +0100
55899 UC101: fix compiler warnings
55901 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
55902 Author: Wolfgang Denk <wd@pollux.denx.de>
55903 Date: Wed Mar 7 16:19:46 2007 +0100
55905 HMI1001: fix build error, cleanup compiler warnings.
55907 commit ad5bb451ade552c44bef9119d907929ebc2c126f
55908 Author: Wolfgang Denk <wd@pollux.denx.de>
55909 Date: Tue Mar 6 18:08:43 2007 +0100
55911 Restructure POST directory to support of other CPUs, boards, etc.
55913 commit a5284efd125967675b2e9c6ef7b95832268ad360
55914 Author: Wolfgang Denk <wd@pollux.denx.de>
55915 Date: Tue Mar 6 18:01:47 2007 +0100
55917 Fix HOSTARCH handling.
55918 Patch by Mike Frysinger, Mar 05 2007
55920 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
55921 Author: Stefan Roese <sr@denx.de>
55922 Date: Tue Mar 6 07:47:04 2007 +0100
55924 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
55926 As provided by the AMCC applications team, this patch optimizes the
55927 DDR2 setup for 166MHz bus speed. The values provided are also save
55928 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
55929 setup has to be adjusted as done in this patch.
55931 For this the NAND booting version had to include the "speed.c" file
55932 from the cpu/ppc4xx directory. With this addition the NAND SPL image
55933 will just fit into the 4kbytes of program space. gcc version 4.x as
55934 provided with ELDK 4.x is needed to generate this optimized code.
55936 Signed-off-by: Stefan Roese <sr@denx.de>
55938 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
55939 Author: Wolfgang Denk <wd@pollux.denx.de>
55940 Date: Sun Mar 4 01:36:05 2007 +0100
55944 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
55945 Author: Kim Phillips <kim.phillips@freescale.com>
55946 Date: Wed Feb 28 00:02:04 2007 -0600
55948 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
55950 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
55952 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
55953 Author: Kumar Gala <galak@kernel.crashing.org>
55954 Date: Tue Feb 27 23:51:42 2007 -0600
55956 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
55958 The config value for:
55966 Were not being used when setting the appropriate register
55969 * CFG_SCCR_USBMPHCM
55974 To allow full config of the SCCR.
55976 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
55977 that were just bogus.
55979 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
55981 commit d51b3cf371cd441030460ef19d36b2924c361b1a
55982 Author: Kim Phillips <kim.phillips@freescale.com>
55983 Date: Thu Feb 22 20:06:57 2007 -0600
55985 mpc83xx: update [local-]mac-address properties on UEC based devices
55987 8360 and 832x weren't updating their [local-]mac-address
55988 properties. This patch fixes that.
55990 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
55992 commit 61f4f912acbe60776c5e00df1ec94094ce672957
55993 Author: Timur Tabi <timur@freescale.com>
55994 Date: Tue Feb 13 10:41:42 2007 -0600
55996 mpc83xx: write MAC address to mac-address and local-mac-address
55998 Some device trees have a mac-address property, some have local-mac-address,
55999 and some have both. To support all of these device trees, this patch
56000 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
56001 This function already updates local-mac-address.
56003 Signed-off-by: Timur Tabi <timur@freescale.com>
56005 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
56006 Author: Kim Phillips <kim.phillips@freescale.com>
56007 Date: Tue Feb 27 18:41:08 2007 -0600
56009 mpc83xx: add command line editing by default
56011 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
56012 Author: Kim Phillips <kim.phillips@freescale.com>
56013 Date: Wed Feb 14 19:50:53 2007 -0600
56015 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
56017 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
56018 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
56020 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
56022 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
56023 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
56025 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
56026 Author: Xie Xiaobo <r63061@freescale.com>
56027 Date: Wed Feb 14 18:27:17 2007 +0800
56029 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
56031 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
56032 it pass DDR/DDR2 compliance tests.
56034 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
56036 commit b110f40bd180c6b560276589beedf753e97c46ce
56037 Author: Xie Xiaobo <r63061@freescale.com>
56038 Date: Wed Feb 14 18:27:06 2007 +0800
56040 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
56042 MPC8360E rev2.0 have new spridr,and PVR value,
56043 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
56045 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
56047 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
56048 Author: Xie Xiaobo <r63061@freescale.com>
56049 Date: Wed Feb 14 18:26:44 2007 +0800
56051 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
56053 MPC8349E rev3.1 have new spridr,and PVR value,
56054 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
56056 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
56058 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
56059 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
56060 Date: Wed Jan 31 11:04:19 2007 +0100
56062 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
56064 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
56065 which is used to se if an slave will ACK after receiving its address.
56067 Correct i2c probing to use this method as the old method could upset
56068 a slave as it wrote a data byte to it.
56070 Add a small delay in i2c_init() to let the controller
56071 shutdown any ongoing I2C activity.
56073 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
56075 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
56076 Author: Timur Tabi <timur@freescale.com>
56077 Date: Wed Jan 31 15:54:29 2007 -0600
56079 mpc83xx: Add support for the MPC8349E-mITX-GP
56081 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
56082 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
56083 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
56085 Signed-off-by: Timur Tabi <timur@freescale.com>
56087 commit fab16807adad350f618024350c6950165c247c72
56088 Author: Timur Tabi <timur@freescale.com>
56089 Date: Wed Jan 31 15:54:20 2007 -0600
56091 mpc83xx: Delete sdram_init() for MPC8349E-mITX
56093 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
56094 never does anything. This patch deletes it.
56096 Signed-off-by: Timur Tabi <timur@freescale.com>
56098 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
56099 Author: Dave Liu <daveliu@freescale.com>
56100 Date: Fri Jan 19 10:43:26 2007 +0800
56102 mpc83xx: Fix the LAW1/3 bug
56104 The patch solves the alignment problem of the local bus access windows to
56105 render accessible the memory bank and PHY registers of UPC 1 (starting at
56106 0xf801 0000). What we actually did was to adjust the sizes of the bus
56107 access windows so that the base address alignment requirement would be met.
56109 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
56110 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
56111 Signed-off-by: Dave Liu <daveliu@freescale.com>
56113 commit 97c4b397dce236a7318b304667bf89e59d08b17c
56114 Author: Kim Phillips <kim.phillips@freescale.com>
56115 Date: Tue Jan 30 16:15:31 2007 -0600
56117 mpc83xx: don't hang if watchdog configured on 8360, 832x
56119 don't hang if watchdog configured on 8360, 832x
56121 The watchdog programming model is the same across all 83xx devices;
56122 make the code reflect that.
56124 commit b70047478570e371ce7223be342ce98afea0f7d6
56125 Author: Kim Phillips <kim.phillips@freescale.com>
56126 Date: Tue Jan 30 16:15:21 2007 -0600
56128 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
56130 protect memcpy to bad address if a local-mac-address is missing from dt
56132 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
56133 Author: Kim Phillips <kim.phillips@freescale.com>
56134 Date: Tue Jan 30 16:15:04 2007 -0600
56136 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
56138 make 8360 default environment fdt be 8360 (not 8349)
56140 commit a28899c910024a0226331df07207b1038c300c93
56141 Author: Emilian Medve <Emilian.Medve@freescale.com>
56142 Date: Tue Jan 30 16:14:50 2007 -0600
56144 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
56146 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
56147 be used for busy-waiting since it strips the 'volatile' property from
56148 the bd variable. gcc3 was working by pure luck.
56150 This is a follow on patch to "Fix the UEC driver bug of QE"
56152 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
56153 Author: Kumar Gala <galak@kernel.crashing.org>
56154 Date: Tue Jan 30 14:08:30 2007 -0600
56156 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
56158 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
56159 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
56160 CONFIG_MPC834X so they are more generic.
56162 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
56164 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
56165 Author: Kim Phillips <kim.phillips@freescale.com>
56166 Date: Thu Jan 25 13:40:55 2007 -0600
56168 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
56170 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
56171 Author: Kim Phillips <kim.phillips@freescale.com>
56172 Date: Wed Jan 24 17:18:37 2007 -0600
56174 mpc83xx: sort Makefile targets
56176 reordered targets alphabetically
56178 commit 91e25769771c1164ed63ffca0add49f934ae3343
56179 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
56180 Date: Tue Jan 16 11:38:14 2007 -0500
56182 mpc83xx: U-Boot support for Wind River SBC8349
56184 I've redone the SBC8349 support to match git-current, which
56185 incorporates all the MPC834x updates from Freescale since the 1.1.6
56186 release, including the DDR changes.
56188 I've kept all the SBC8349 files as parallel as possible to the
56189 MPC8349EMDS ones for ease of maintenance and to allow for easy
56190 inspection of what was changed to support this board. Hence the SBC8349
56191 U-Boot has FDT support and everything else that the MPC8349EMDS has.
56193 Fortunately the Freescale updates added support for boards using CS0,
56194 but I had to change spd_sdram.c to allow for board specific settings for
56195 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
56196 default if the board doesn't specify a value.)
56198 Hopefully this should be mergeable as-is and require no whitespace
56199 cleanups or similar, but if something doesn't measure up then let me
56200 know and I'll fix it.
56205 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
56206 Author: Sam Song <samsongshu@yahoo.com.cn>
56207 Date: Thu Dec 14 19:03:21 2006 +0800
56209 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
56211 A redundant semicolon existed in mpc8349itx.c
56214 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
56216 commit f35f358241c549be3f75cfe2eaa642914275b7ba
56217 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
56218 Date: Wed Dec 6 21:23:55 2006 -0500
56220 mpc83xx: Put the version (and magic) after the HRCW.
56222 Put the version (and magic) after the HRCW. This puts it in a fixed
56223 location in flash, not at the start of flash but as close as we can get.
56225 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
56227 commit 48aecd969171a6e99a55fae04933857787f9a5bd
56228 Author: Dave Liu <r63238@freescale.com>
56229 Date: Thu Dec 7 21:14:51 2006 +0800
56231 mpc83xx: Add the MPC832XEMDS board readme
56233 Add the MPC832XEMDS board readme
56235 Signed-off-by: Dave Liu <daveliu@freescale.com>
56237 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
56238 Author: Dave Liu <r63238@freescale.com>
56239 Date: Thu Dec 7 21:13:15 2006 +0800
56241 mpc83xx: Add support for the MPC832XEMDS board
56243 This patch supports DUART, ETH3/4 and PCI etc.
56245 Signed-off-by: Dave Liu <daveliu@freescale.com>
56247 commit e080313c32322e15ab5a18eb896a252858c57284
56248 Author: Dave Liu <r63238@freescale.com>
56249 Date: Thu Dec 7 21:11:58 2006 +0800
56251 mpc83xx: streamline the 83xx immr head file
56253 For better format and style, I streamlined the 83xx head files,
56254 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
56255 duplicated macro definition appear in the both files; 2) the structure
56256 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
56257 macro definition put inside the each structure. So, I cleaned up the
56258 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
56259 moved the macro definition to mpc83xx.h, Just like MPC8260.
56263 *streamline the 83xx immr head file
56265 Signed-off-by: Dave Liu <daveliu@freescale.com>
56267 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
56268 Author: Dave Liu <r63238@freescale.com>
56269 Date: Wed Dec 6 11:38:17 2006 +0800
56271 mpc83xx: Fix the UEC driver bug of QE
56273 The patch prevents the GCC tool chain from striping useful code for
56274 optimization. It will make UEC ethernet driver workable, Otherwise the
56275 UEC will fail in tx when you are using gcc4.x. but the driver can work
56276 when using gcc3.4.3.
56280 *Prevent the GCC from striping code for optimization, Otherwise the UEC
56281 will tx failed when you are using gcc4.x.
56283 Signed-off-by: Dave Liu <daveliu@freescale.com>
56285 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
56286 Author: Stefan Roese <sr@denx.de>
56287 Date: Thu Mar 1 21:11:36 2007 +0100
56289 [PATCH] Update AMCC Katmai 440SPe eval board support
56291 This patch updates the recently added Katmai board support. The biggest
56292 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
56295 Please note, that still some problems are left with some memory
56296 configurations. See the driver for more details.
56298 Signed-off-by: Stefan Roese <sr@denx.de>
56300 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
56301 Author: Stefan Roese <sr@denx.de>
56302 Date: Thu Mar 1 07:03:25 2007 +0100
56304 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
56306 Signed-off-by: Stefan Roese <sr@denx.de>
56308 commit ccbc7036648e465697ca298ba51e0e76dda352a0
56309 Author: Wolfgang Denk <wd@pollux.denx.de>
56310 Date: Wed Feb 28 01:28:53 2007 +0100
56312 SC3: fix typo in default environment
56314 commit e344568b1b46af85ec32d815586f91bc115d6223
56315 Author: Sergei Poselenov <sposelenov@emcraft.com>
56316 Date: Tue Feb 27 20:15:30 2007 +0300
56318 MCC200: Fixes for update procedure
56320 - fix logic error in image type handling
56321 - make sure file system images (cramfs etc.) get stored in flash
56322 with image header stripped so they can be mounted through MTD
56324 commit 743571145b37182757d4e688a77860b36ee77573
56325 Author: Wolfgang Denk <wd@pollux.denx.de>
56326 Date: Tue Feb 27 14:26:04 2007 +0100
56328 Minor code cleanup.
56330 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
56331 Author: Sergei Poselenov <sposelenov@emcraft.com>
56332 Date: Tue Feb 27 12:40:16 2007 +0300
56334 MCC200 update - add LCD Progress Indicator
56336 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
56337 Author: Stefan Roese <sr@denx.de>
56338 Date: Thu Feb 22 07:43:34 2007 +0100
56340 [PATCH] get_dev() now unconditionally uses manual relocation
56342 Since the relocation fix is not included yet and we're not sure how
56343 it will be added, this patch removes code that required relocation
56344 to be fixed for now.
56346 Signed-off-by: Stefan Roese <sr@denx.de>
56348 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
56349 Author: Stefan Roese <sr@denx.de>
56350 Date: Thu Feb 22 07:40:23 2007 +0100
56352 [PATCH] Change systemace driver to select 8 & 16bit mode
56354 As suggested by Grant Likely this patch enables the Xilinx SystemACE
56355 driver to select 8 or 16bit mode upon startup.
56357 Signed-off-by: Stefan Roese <sr@denx.de>
56359 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
56360 Author: Haiying Wang <Haiying.Wang@freescale.com>
56361 Date: Wed Feb 21 16:52:31 2007 +0100
56363 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
56365 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
56366 is fully finished. The sync() is defined in each CPU's io.h file. For
56367 those CPUs which do not need sync for now, a dummy sync() is defined in
56368 their io.h as well.
56370 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
56372 commit da04995c7dc6772013a9a0dc5c767f190c402478
56373 Author: Stefan Roese <sr@denx.de>
56374 Date: Wed Feb 21 13:44:34 2007 +0100
56376 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
56378 Signed-off-by: Stefan Roese <sr@denx.de>
56380 commit 751bb57107d78978ae08e697c3deba816f5be091
56381 Author: Stefan Roese <sr@denx.de>
56382 Date: Tue Feb 20 13:21:57 2007 +0100
56384 [PATCH] Fix relocation problem with "new" get_dev() function
56386 This patch enables the "new" get_dev() function for block devices
56387 introduced by Grant Likely to be used on systems that still suffer
56388 from the relocation problems (manual relocation neede because of
56389 problems with linker script).
56391 Hopefully we can resolve this relocation issue soon for all platform
56392 so we don't need this additional code anymore.
56394 Signed-off-by: Stefan Roese <sr@denx.de>
56396 commit d93e2212f962668b3dce091ff5edc33f2347fe37
56397 Author: Stefan Roese <sr@denx.de>
56398 Date: Tue Feb 20 13:17:42 2007 +0100
56400 [PATCH] Update SystemACE driver for 16bit access
56402 This patch removes some problems when the Xilinx SystemACE driver
56403 is used with 16bit access on an big endian platform (like the
56406 Signed-off-by: Stefan Roese <sr@denx.de>
56408 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
56409 Author: Stefan Roese <sr@denx.de>
56410 Date: Tue Feb 20 13:15:40 2007 +0100
56412 [PATCH] Clean up Katmai (440SPe) linker script
56414 Signed-off-by: Stefan Roese <sr@denx.de>
56416 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
56417 Author: Stefan Roese <sr@denx.de>
56418 Date: Tue Feb 20 10:57:08 2007 +0100
56420 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
56422 Signed-off-by: Stefan Roese <sr@denx.de>
56424 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
56425 Author: Stefan Roese <sr@denx.de>
56426 Date: Tue Feb 20 10:51:26 2007 +0100
56428 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
56430 This patch switches to the desired I2C bus when the date/dtt
56431 commands are called. This can be configured using the
56432 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
56434 Signed-off-by: Stefan Roese <sr@denx.de>
56436 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
56437 Author: Stefan Roese <sr@denx.de>
56438 Date: Tue Feb 20 10:43:34 2007 +0100
56440 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
56442 This patch adds support for the DDR2 controller used on the
56443 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
56444 board and works fine with the following DIMM modules:
56446 - Corsair CM2X512-5400C4 (512MByte per DIMM)
56447 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
56448 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
56450 This patch also adds the nice functionality to dynamically
56451 create the TLB entries for the SDRAM (tlb.c). So we should
56452 never run into such problems with wrong (too short) TLB
56453 initialization again on these platforms.
56455 Signed-off-by: Stefan Roese <sr@denx.de>
56457 commit 36d830c9830379045f5daa9f542ac1c990c70068
56458 Author: Stefan Roese <sr@denx.de>
56459 Date: Tue Feb 20 10:35:42 2007 +0100
56461 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
56463 Since the existing 4xx SPD SDRAM initialization routines for the
56464 405 SDRAM controller and the 440 DDR controller don't have much in
56465 common this patch splits both drivers into different files.
56467 This is in preparation for the 440 DDR2 controller support (440SP/e).
56469 Signed-off-by: Stefan Roese <sr@denx.de>
56471 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
56472 Author: Stefan Roese <sr@denx.de>
56473 Date: Tue Feb 20 10:27:08 2007 +0100
56475 [PATCH] PPC4xx: Add support for multiple I2C busses
56477 This patch adds support for multiple I2C busses on the PPC4xx
56478 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
56479 to make use of this feature.
56481 It also merges the 405 and 440 i2c header files into one common
56484 Also the 4xx i2c reset procedure is reworked since I experienced
56485 some problems with the first access on the 440SPe Katmai board.
56487 Signed-off-by: Stefan Roese <sr@denx.de>
56489 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
56490 Author: Grant Likely <grant.likely@secretlab.ca>
56491 Date: Tue Feb 20 09:05:45 2007 +0100
56493 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
56495 Block device read/write is anonymous data; there is no need to use a
56496 typed pointer. void * is fine. Also add a hook for block_read functions
56498 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
56500 commit 53758fa20e935cc87eeb0519ed365df753a6f289
56501 Author: Grant Likely <grant.likely@secretlab.ca>
56502 Date: Tue Feb 20 09:05:38 2007 +0100
56504 [PATCH 8_9] Add block_write hook to block_dev_desc_t
56506 Preparation for future patches which support block device writing
56508 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
56510 commit f4852ebe6ca946a509667eb68be42026f837be76
56511 Author: Grant Likely <grant.likely@secretlab.ca>
56512 Date: Tue Feb 20 09:05:31 2007 +0100
56514 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
56516 Register read/write does not need to be wrapped in a full function. The
56517 patch replaces them with macros.
56519 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
56521 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
56522 Author: Grant Likely <grant.likely@secretlab.ca>
56523 Date: Tue Feb 20 09:05:23 2007 +0100
56525 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
56527 The code in this file is not a command; it is a device driver. Put it in
56528 the correct place. There are zero functional changes in this patch, it
56529 only moves the file.
56531 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
56533 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
56534 Author: Grant Likely <grant.likely@secretlab.ca>
56535 Date: Tue Feb 20 09:05:16 2007 +0100
56537 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
56539 This patch is in preparation of additional changes to the sysace driver.
56540 May as well take this opportunity to fixup the inconsistent whitespace since
56541 this file is about to undergo major changes anyway.
56543 There are zero functional changes in this patch. It only cleans up the
56546 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
56548 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
56549 Author: Grant Likely <grant.likely@secretlab.ca>
56550 Date: Tue Feb 20 09:05:07 2007 +0100
56552 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
56554 isprint is already defined in ctype.c
56556 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
56558 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
56559 Author: Grant Likely <grant.likely@secretlab.ca>
56560 Date: Tue Feb 20 09:05:00 2007 +0100
56562 [PATCH 3_9] Move buffer print code from md command to common function
56564 Printing a buffer is a darn useful thing. Move the buffer print code
56565 into print_buffer() in lib_generic/
56567 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
56569 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
56570 Author: Grant Likely <grant.likely@secretlab.ca>
56571 Date: Tue Feb 20 09:04:52 2007 +0100
56573 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
56575 Change the xilinx device drivers and board code to include config.h
56576 instead of xparameters.h directly. config.h always includes the
56577 correct xparameters file. This change reduces the posibility of
56578 including the wrong file when adding a new xilinx board port
56580 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
56582 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
56583 Author: Grant Likely <grant.likely@secretlab.ca>
56584 Date: Tue Feb 20 09:04:34 2007 +0100
56586 [PATCH 1_4] Merge common get_dev() routines for block devices
56588 Each of the filesystem drivers duplicate the get_dev routine. This change
56589 merges them into a single function in part.c
56591 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
56593 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
56594 Author: Wolfgang Denk <wd@pollux.denx.de>
56595 Date: Mon Feb 19 23:09:51 2007 +0100
56597 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
56598 as root file system images.
56600 commit 489c696ae7211218961d159e43e722d74c36fcbc
56601 Author: Sergei Poselenov <sposelenov@emcraft.com>
56602 Date: Wed Feb 14 14:30:28 2007 +0300
56604 MCC200: Extensions to Software Update Mechanism
56606 Update / extend Software Update Mechanism for MCC200 board:
56608 - Add support for rootfs image added. The environment variables
56609 "rootfs_st" and "rootfs_nd" can be used to override the default
56610 values of the image start and end.
56611 - Remove excessive key check code.
56614 commit 4be23a12f23f1372634edc3215137b09768b7949
56615 Author: Stefan Roese <sr@denx.de>
56616 Date: Mon Feb 19 08:23:15 2007 +0100
56618 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
56620 As spotted by Matthias Fuchs, the READY input should not be
56621 enabled for the NOR FLASH on the Sequoia board.
56623 Signed-off-by: Stefan Roese <sr@denx.de>
56625 commit 2605e90bf676d48123afe5719a846d2b52b24aac
56626 Author: Heiko Schocher <hs@pollux.denx.de>
56627 Date: Fri Feb 16 07:57:42 2007 +0100
56629 [PATCH] Added support for the jupiter board.
56631 Signed-off-by: Heiko Schocher <hs@denx.de>
56633 commit 497d012e5be0194e1084073d0081eb1a844796b2
56634 Author: Gary Jennejohn <garyj@pollux.denx.de>
56635 Date: Mon Feb 12 13:11:50 2007 +0100
56637 LPC2292: patch from Siemens.
56639 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
56640 Author: Stefan Roese <sr@denx.de>
56641 Date: Sat Feb 10 08:49:31 2007 +0100
56643 [PATCH] Add missing p3mx.h file to repository (ups)
56645 Signed-off-by: Stefan Roese <sr@denx.de>
56647 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
56648 Author: Bartlomiej Sieka <tur@semihalf.com>
56649 Date: Fri Feb 9 10:45:42 2007 +0100
56651 [Motion-PRO] Preliminary support for the Motion-PRO board.
56653 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
56654 Author: Stefan Roese <sr@denx.de>
56655 Date: Wed Feb 7 16:51:08 2007 +0100
56657 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
56659 Some boards that can have more than 768MBytes of SDRAM need to
56660 set "initrd_high", so that the initrd can be accessed by the
56663 Signed-off-by: Stefan Roese <sr@denx.de>
56665 commit 7372ca68227930d03cffa548310524cad5b96733
56666 Author: Stefan Roese <sr@denx.de>
56667 Date: Fri Feb 2 12:44:22 2007 +0100
56669 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
56671 Previously the strapping DCR/SDR was read to determine if the internal PCI
56672 arbiter is enabled or not. This strapping bit can be overridden, so now
56673 the current status is read from the correct DCR/SDR register.
56675 Signed-off-by: Stefan Roese <sr@denx.de>
56677 commit 2aa54f651a42d198673318f07a20c89a43e4d197
56678 Author: Stefan Roese <sr@denx.de>
56679 Date: Fri Feb 2 12:42:08 2007 +0100
56681 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
56683 Signed-off-by: Stefan Roese <sr@denx.de>
56685 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
56686 Author: Stefan Roese <sr@denx.de>
56687 Date: Thu Feb 1 13:22:41 2007 +0100
56689 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
56691 When PCI PNP is enabled the pci pnp configuration routine is called
56692 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
56693 problems with some PCI cards. For now disable the PCI PNP configuration.
56695 Signed-off-by: Stefan Roese <sr@denx.de>
56697 commit 2902fadade3be7659467e8d074048c6b7068f5c0
56698 Author: Stefan Roese <sr@denx.de>
56699 Date: Wed Jan 31 16:56:10 2007 +0100
56701 [PATCH] Update 440EPx/440GRx cpu detection
56703 Signed-off-by: Stefan Roese <sr@denx.de>
56705 commit d5ea287b02a6945c3977410e364a879dd1a555c8
56706 Author: Stefan Roese <sr@denx.de>
56707 Date: Wed Jan 31 16:38:04 2007 +0100
56709 [PATCH] Update esd cpci5200 files
56711 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
56713 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
56714 Author: Stefan Roese <sr@denx.de>
56715 Date: Wed Jan 31 16:37:34 2007 +0100
56717 [PATCH] Add support for esd mecp5200 board
56719 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
56721 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
56722 Author: Stefan Roese <sr@denx.de>
56723 Date: Wed Jan 31 12:38:50 2007 +0100
56725 [PATCH] Remove unneccessary yellowstone board config file
56727 Signed-off-by: Stefan Roese <sr@denx.de>
56729 commit e802594b6fa1b166308820c276b96dc0d7cc731c
56730 Author: Stefan Roese <sr@denx.de>
56731 Date: Tue Jan 30 17:06:10 2007 +0100
56733 [PATCH] Update Sequoia (440EPx) config file
56735 The config file now handles the 2nd target, the Rainier (440GRx)
56736 evaluation board better. Additionally the PPC input clock was
56737 adjusted to match the correct value of 33.0 MHz.
56739 Signed-off-by: Stefan Roese <sr@denx.de>
56741 commit 700200c67e73b83751418abe7815840dca8fd6cb
56742 Author: Stefan Roese <sr@denx.de>
56743 Date: Tue Jan 30 17:04:19 2007 +0100
56745 [PATCH] Merge Yosemite & Yellowstone board ports
56747 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
56748 share one config file and all board specific files. This way we
56749 don't have to maintain two different sets of files for nearly
56752 Signed-off-by: Stefan Roese <sr@denx.de>
56754 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
56755 Author: Stefan Roese <sr@denx.de>
56756 Date: Tue Jan 30 15:01:49 2007 +0100
56758 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
56760 SCPU doesn't use redundant environment in flash.
56762 Signed-off-by: Stefan Roese <sr@denx.de>
56764 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
56765 Author: Stefan Roese <sr@denx.de>
56766 Date: Tue Jan 30 12:51:07 2007 +0100
56768 [PATCH] alpr: Update alpr board config file
56770 Signed-off-by: Stefan Roese <sr@denx.de>
56772 commit f8db84f132b1e335f20f96138a1f09ed97b08664
56773 Author: Wolfgang Denk <wd@pollux.denx.de>
56774 Date: Tue Jan 30 00:50:40 2007 +0100
56776 LPC2292 SODIMM port coding style cleanup.
56778 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
56779 Author: Gary Jennejohn <garyj@pollux.denx.de>
56780 Date: Wed Jan 24 12:16:56 2007 +0100
56782 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
56784 commit 2daf046ba627f85f44195815778140039636244e
56785 Author: Bartlomiej Sieka <tur@semihalf.com>
56786 Date: Tue Jan 23 17:22:06 2007 +0100
56788 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
56790 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
56791 Author: Bartlomiej Sieka <tur@semihalf.com>
56792 Date: Tue Jan 23 14:21:14 2007 +0100
56794 [iDMR] Flash driver on initialisation write-protects some sectors,
56795 currently sectors 0-3. Sector 3 does not need to be protected, though
56796 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
56797 fixes this, i.e., only sectors 0-2 are protected.
56799 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
56800 Author: Bartlomiej Sieka <tur@semihalf.com>
56801 Date: Tue Jan 23 14:11:22 2007 +0100
56803 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
56804 "mii device" results in "Unexpected exception"). Fixing this properly
56805 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
56806 this commit disables MII commads for now.
56808 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
56809 Author: Bartlomiej Sieka <tur@semihalf.com>
56810 Date: Tue Jan 23 13:25:22 2007 +0100
56812 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
56813 Identification Register (CIR).
56815 commit fdef388758506765d4d6a7155c8f1584c63ff581
56816 Author: roy zang <tie-fei.zang@freescale.com>
56817 Date: Mon Jan 22 13:19:21 2007 +0800
56819 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
56820 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
56821 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
56824 commit a4012396645533aef218354eeba754dff0deace8
56825 Author: Wolfgang Denk <wd@pollux.denx.de>
56826 Date: Fri Jan 19 23:08:39 2007 +0100
56828 Minor code cleanup.
56830 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
56831 Author: Heiko Schocher <hs@pollux.denx.de>
56832 Date: Fri Jan 19 19:57:10 2007 +0100
56834 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
56836 Signed-off-by: Heiko Schocher <hs@denx.de>
56838 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
56839 Author: Heiko Schocher <hs@pollux.denx.de>
56840 Date: Fri Jan 19 18:05:26 2007 +0100
56842 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
56843 if you must swap the bytes between reading/writing.
56844 (Needed for the SC3 board)
56846 Signed-off-by: Heiko Schocher <hs@denx.de>
56848 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
56849 Author: Stefan Roese <sr@denx.de>
56850 Date: Thu Jan 18 16:05:47 2007 +0100
56852 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
56854 Signed-off-by: Stefan Roese <sr@denx.de>
56856 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
56857 Author: Stefan Roese <sr@denx.de>
56858 Date: Thu Jan 18 11:54:52 2007 +0100
56860 [PATCH] Update Prodrive P3Mx support
56862 Signed-off-by: Stefan Roese <sr@denx.de>
56864 commit 34167a36c29ee946b727465db5c014746a08e978
56865 Author: Stefan Roese <sr@denx.de>
56866 Date: Thu Jan 18 11:48:10 2007 +0100
56868 [PATCH] Add missing Taishan config file
56870 Signed-off-by: Stefan Roese <sr@denx.de>
56872 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
56873 Author: Heiko Schocher <hs@pollux.denx.de>
56874 Date: Thu Jan 18 11:28:51 2007 +0100
56876 [PATCH] Fix: Compilerwarnings for SC3 board.
56877 The EBC Configuration Register is now by CFG_EBC_CFG definable
56878 Added JFFS2 support for the SC3 board.
56880 Signed-off-by: Heiko Schocher <hs@denx.de>
56882 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
56883 Author: Stefan Roese <sr@denx.de>
56884 Date: Thu Jan 18 10:25:34 2007 +0100
56886 [PATCH] Add support for AMCC Taishan PPC440GX eval board
56888 Signed-off-by: Stefan Roese <sr@denx.de>
56890 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
56891 Author: Wolfgang Denk <wd@pollux.denx.de>
56892 Date: Tue Jan 16 18:30:50 2007 +0100
56894 Raname solidcard3 into sc3; add redundant env for sc3
56896 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
56897 Author: Wolfgang Denk <wd@pollux.denx.de>
56898 Date: Tue Jan 16 12:46:35 2007 +0100
56900 Update default environment for Solidcard3
56902 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
56903 Author: Stefan Roese <sr@denx.de>
56904 Date: Mon Jan 15 09:46:29 2007 +0100
56906 [PATCH] Fix 440SPe rev B detection from previous patch
56908 Signed-off-by: Stefan Roese <sr@denx.de>
56910 commit a443d31410c571ee8f970da819a44d698fdd6b1f
56911 Author: Heiko Schocher <hs@pollux.denx.de>
56912 Date: Sun Jan 14 13:35:31 2007 +0100
56914 [FIX] correct I2C Writes for the LM81 Sensor.
56916 Signed-off-by: Heiko Schocher <hs@denx.de>
56918 commit 0bba5452835f19a61204edcda3a58112fd8e2208
56919 Author: Wolfgang Denk <wd@pollux.denx.de>
56920 Date: Sat Jan 13 11:17:10 2007 +0100
56922 Undo commit 3033ebb2: reset command does not take any arguments
56924 Haiying Wang's modification to the reset command was broken, undo it.
56926 Signed-off-by: Wolfgang Denk <wd@denx.de>
56928 commit 95981778cff0038fd9941044d6a3eda810e33258
56929 Author: Stefan Roese <sr@denx.de>
56930 Date: Sat Jan 13 08:01:03 2007 +0100
56932 [PATCH] Update 440SP(e) cpu revisions
56934 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
56936 Signed-off-by: Stefan Roese <sr@denx.de>
56938 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
56939 Author: Stefan Roese <sr@denx.de>
56940 Date: Sat Jan 13 07:59:56 2007 +0100
56942 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
56944 Now the board revision and the current PCI bus speed are printed after
56947 Also the EBC initialising is now done via defines in the board config
56950 Signed-off-by: Stefan Roese <sr@denx.de>
56952 commit 36adff362c2c0141ff8a810d42a7e478f779130f
56953 Author: Stefan Roese <sr@denx.de>
56954 Date: Sat Jan 13 07:59:19 2007 +0100
56956 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
56958 Now the board revision and the current PCI bus speed are printed after
56961 Also the EBC initialising is now done via defines in the board config
56964 Signed-off-by: Stefan Roese <sr@denx.de>
56966 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
56967 Author: Stefan Roese <sr@denx.de>
56968 Date: Sat Jan 13 07:57:51 2007 +0100
56970 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
56972 Now the board revision and the current PCI bus speed are printed after
56975 Signed-off-by: Stefan Roese <sr@denx.de>
56977 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
56978 Author: Heiko Schocher <hs@pollux.denx.de>
56979 Date: Thu Jan 11 15:44:44 2007 +0100
56981 Added support for the SOLIDCARD III board from Eurodesign
56983 Signed-off-by: Heiko Schocher <hs@denx.de>
56985 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
56986 Author: Reinhard Thies <Reinhard.Thies@web.de>
56987 Date: Wed Jan 10 14:41:14 2007 +0100
56989 Adjusted default environment for cam5200 board.
56991 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
56992 Author: Wolfgang Denk <wd@pollux.denx.de>
56993 Date: Wed Jan 10 15:35:52 2007 +0100
56997 commit 787fa15860a57833e50bd30555079a9cd4e519b8
56998 Author: Wolfgang Denk <wd@pollux.denx.de>
56999 Date: Wed Jan 10 01:28:39 2007 +0100
57001 Fix auto_update for MCC200 board.
57003 The invocation of do_auto_update() is moved to the end of the
57004 misc_init_r() function, after the flash mappings have been
57005 initialized. Please find attached a patch that implements that
57008 Also correct the decoding of the keypad status. With this update, the
57009 key that will trigger the update is Column 2, Row 2.
57011 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
57012 Author: Marian Balakowicz <m8@semihalf.com>
57013 Date: Wed Jan 10 00:26:15 2007 +0100
57015 CAM5200 flash driver modifications:
57016 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
57017 - add second build target 'cam5200_niosflash' which still uses custom driver
57019 commit 67fea022fa957f59653b5238c7496f80a6b70432
57020 Author: Markus Klotzbuecher <mk@denx.de>
57021 Date: Tue Jan 9 16:02:48 2007 +0100
57023 SPC1920: cleanup memory contoller setup
57025 commit 8fc2102faa23593c80381437c09f7745a14deb40
57026 Author: Markus Klotzbuecher <mk@denx.de>
57027 Date: Tue Jan 9 14:57:14 2007 +0100
57029 Fix the cpu speed setup to work with all boards.
57031 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
57032 Author: Markus Klotzbuecher <mk@denx.de>
57033 Date: Tue Jan 9 14:57:13 2007 +0100
57035 SPC1920: add support for the FM18L08 Ramtron FRAM
57037 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
57038 Author: Markus Klotzbuecher <mk@denx.de>
57039 Date: Tue Jan 9 14:57:13 2007 +0100
57041 SPC1920: update the HPI register addresses to work with the second
57042 generation of hardware
57044 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
57045 Author: Markus Klotzbuecher <mk@creamnet.de>
57046 Date: Tue Jan 9 14:57:13 2007 +0100
57048 Miscellanious spc1920 related cleanups
57050 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
57051 Author: Markus Klotzbuecher <mk@denx.de>
57052 Date: Tue Jan 9 14:57:12 2007 +0100
57054 SPC1920 GO/NOGO led should be set to color red in U-Boot
57056 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
57057 Author: Markus Klotzbuecher <mk@creamnet.de>
57058 Date: Tue Jan 9 14:57:12 2007 +0100
57060 Add support for the DS3231 RTC
57062 commit 8139567b60d678584b05f0718a681f2047c5e14f
57063 Author: Markus Klotzbuecher <mk@creamnet.de>
57064 Date: Tue Jan 9 14:57:11 2007 +0100
57066 SMC1 uses external CLK4 instead of BRG on spc1920
57068 commit d8d9de1a02fbd880b613d607143d1f57342affc7
57069 Author: Markus Klotzbuecher <mk@creamnet.de>
57070 Date: Tue Jan 9 14:57:10 2007 +0100
57072 Update the SPC1920 CMB PLD driver
57074 commit 3f34f869162750e5e999fd140f884f5de952bcfe
57075 Author: Markus Klotzbuecher <mk@creamnet.de>
57076 Date: Tue Jan 9 14:57:10 2007 +0100
57078 Add / enable I2C support on the spc1920 board
57080 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
57081 Author: Markus Klotzbuecher <mk@creamnet.de>
57082 Date: Tue Jan 9 14:57:10 2007 +0100
57084 Add support for the tms320671x host port interface (HPI)
57086 commit f4eb54529bb3664c3a562e488b460fe075f79d67
57087 Author: Wolfgang Denk <wd@pollux.denx.de>
57088 Date: Sun Jan 7 00:13:11 2007 +0100
57090 Prepare for release 1.2.0
57092 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
57093 Author: Stefan Roese <sr@denx.de>
57094 Date: Sat Jan 6 15:58:09 2007 +0100
57096 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
57098 This patch fixes a problem with an incorrect setup for the refresh
57099 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
57101 Signed-off-by: Stefan Roese <sr@denx.de>
57103 commit f16c1da9577f06c5fc08651a4065537407de4635
57104 Author: Stefan Roese <sr@denx.de>
57105 Date: Sat Jan 6 15:56:13 2007 +0100
57107 [PATCH] Update ALPR board files
57109 This update brings the ALPR board support to the newest version.
57110 It also fixes a problem with the NAND driver.
57112 Signed-off-by: Stefan Roese <sr@denx.de>
57114 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
57115 Author: Stefan Roese <sr@denx.de>
57116 Date: Fri Jan 5 11:46:05 2007 +0100
57118 [PATCH] nand: Fix problem with oobsize calculation
57120 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
57122 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
57123 returns a 0x15. In the code fragment below bits [1:0] determine the
57124 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
57125 next field is also ANDed with 0x3. However this is a one bit field
57126 as defined in the Hynix and Samsung parts in the 4th ID byte that
57127 determins the oobsize, not a two bit field. It works on Samsung as
57128 bits[3:2] are 01. However for the Hynix there is a 11 in these two
57129 bits, so the oob size gets messed up.
57131 I checked the correct linux code and the suggested fix from Brian is
57132 also available in the linux nand mtd driver.
57134 Signed-off-by: Stefan Roese <sr@denx.de>
57136 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
57137 Author: Stefan Roese <sr@denx.de>
57138 Date: Fri Jan 5 10:40:36 2007 +0100
57140 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
57142 This fix will make the MAL burst disabling patch for the Linux
57143 EMAC driver obsolete.
57145 Signed-off-by: Stefan Roese <sr@denx.de>
57147 commit 023889838282b6237b401664f22dd22dfba2c066
57148 Author: Stefan Roese <sr@denx.de>
57149 Date: Fri Jan 5 10:38:05 2007 +0100
57151 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
57153 This code will optimize the DDR2 controller setup on a board specific
57156 Note: This code doesn't work right now on the NAND booting image for the
57157 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
57159 Signed-off-by: Stefan Roese <sr@denx.de>
57161 commit cce4acbb68398634b8d011ed7bb0d12269c84230
57162 Author: Bartlomiej Sieka <tur@semihalf.com>
57163 Date: Thu Dec 28 19:08:21 2006 +0100
57166 - fix a typo in V38B config file
57167 - move watchdog initialisation earlier in the boot process
57168 - add "wdt=off" to default kernel command line (disables kernel watchdog)
57170 commit 92eb729bad876725aeea908d2addba0800620840
57171 Author: Wolfgang Denk <wd@pollux.denx.de>
57172 Date: Wed Dec 27 01:26:13 2006 +0100
57174 Fix bug in adaption of Stefano Babic's CFI driver patch.
57176 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
57177 Author: Wolfgang Denk <wd@pollux.denx.de>
57178 Date: Sun Dec 24 01:42:57 2006 +0100
57180 Minor code cleanup.
57182 commit d784fdb05900ada3686d5778783e1fb328e9fb66
57183 Author: Stefano Babic <sbabic@denx.de>
57184 Date: Tue Dec 12 00:22:42 2006 +0100
57186 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
57188 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
57189 Author: Stefan Roese <sr@denx.de>
57190 Date: Fri Dec 22 14:29:40 2006 +0100
57192 [PATCH] Fix sequoia flash autodetection (finally correct)
57194 Now 32MByte and 64MByte FLASH is know to work and other
57195 configurations should work too.
57197 Signed-off-by: Stefan Roese <sr@denx.de>
57199 commit 82e5236a8b719543643fd26d5827938ab2b94818
57200 Author: Wolfgang Denk <wd@pollux.denx.de>
57201 Date: Fri Dec 22 10:30:26 2006 +0100
57203 Minor code cleanup; update CHANGELOG.
57205 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
57206 Author: Heiko Schocher <hs@pollux.denx.de>
57207 Date: Thu Dec 21 17:17:02 2006 +0100
57209 Added support for the TQM8272 board from TQ
57211 Signed-off-by: Heiko Schocher <hs@denx.de>
57213 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
57214 Author: Heiko Schocher <hs@pollux.denx.de>
57215 Date: Thu Dec 21 16:14:48 2006 +0100
57217 [PATCH] Add support for the UC101 board from MAN.
57219 Signed-off-by: Heiko Schocher <hs@denx.de>
57221 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
57222 Author: Bartlomiej Sieka <tur@semihalf.com>
57223 Date: Wed Dec 20 00:29:43 2006 +0100
57225 Fix to make the baudrate changes immediate for the MCF52x2 family.
57227 commit daa6e418bcc0c717752e8de939c213c790286096
57228 Author: Bartlomiej Sieka <tur@semihalf.com>
57229 Date: Wed Dec 20 00:27:32 2006 +0100
57231 Preliminary support for the iDMR board (ColdFire).
57233 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
57234 Author: Andrei Safronov <safronov@pollux.denx.de>
57235 Date: Fri Dec 8 16:23:08 2006 +0100
57237 automatic update mechanism
57239 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
57240 Author: roy zang <tie-fei.zang@freescale.com>
57241 Date: Mon Dec 4 17:56:59 2006 +0800
57243 Slight code clean up.
57244 Add comments, delete duplicate define and remove spaces.
57245 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
57247 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
57248 Author: roy zang <tie-fei.zang@freescale.com>
57249 Date: Mon Dec 4 17:54:21 2006 +0800
57251 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
57252 multiplier table can not refect the real PLL clock behavior of these
57253 processors. Please refer to the hardware specification for detailed
57254 information of the corresponding processors.
57255 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
57257 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
57258 Author: roy zang <tie-fei.zang@freescale.com>
57259 Date: Mon Dec 4 14:46:23 2006 +0800
57261 Remove the static MAC address, ip address, server ip, netmask and
57262 gateway ip for network setting.
57263 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
57265 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
57266 Author: roy zang <tie-fei.zang@freescale.com>
57267 Date: Mon Dec 4 14:33:08 2006 +0800
57269 Remove the duplicate memory test code for mpc744ihpc2 board.
57270 If a memory test is needed, please use the functions in
57271 post/memory.c or memtest command.
57272 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
57274 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
57275 Author: roy zang <tie-fei.zang@freescale.com>
57276 Date: Fri Dec 1 19:01:25 2006 +0800
57278 Fix the exception occuring in RAM table search issue.
57279 The original search_one_table() function code can only processes the search
57280 for the exception occurring in FLASH/ROM, because the exception and fixup
57281 table usually locate in FLASH. If the exception address is also in
57282 FLASH, it will be OK.
57283 If the exception occurs in RAM, after the u-boot relocation, a
57284 relocation offset should be added.
57286 clean up the code in cpu/74xx_7xx/cpu.c
57288 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
57290 commit ee311214e0d216f904feea269599d0934bf71f23
57291 Author: roy zang <tie-fei.zang@freescale.com>
57292 Date: Fri Dec 1 11:47:36 2006 +0800
57294 Clean up the code according to codestyle:
57295 (1) remove some C++ comments.
57296 (2) remove trailing white space.
57297 (3) remove trailing empty line.
57298 (4) Indentation by table.
57299 (5) remove {} in one line condition.
57300 (6) add space before '(' in function call.
57301 Remove some weird printf () output.
57302 Add necessary comments.
57303 Modified Makefile to support building in a separate directory.
57305 commit dd520bf314c7add4183c5191692180f576f96b60
57306 Author: Wolfgang Denk <wd@pollux.denx.de>
57307 Date: Thu Nov 30 18:02:20 2006 +0100
57311 commit 8d9a8610b8256331132227e9e6585c6bd5742787
57312 Author: Wolfgang Denk <wd@pollux.denx.de>
57313 Date: Thu Nov 30 01:54:07 2006 +0100
57315 Code cleanup. Update CHANGELOG.
57317 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
57318 Author: Grant Likely <grant.likely@secretlab.ca>
57319 Date: Wed Nov 29 16:23:42 2006 +0100
57321 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
57323 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
57324 not the XLB frequency.
57326 This patch depends on the previous patches for MPC52xx device tree support
57328 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57329 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
57331 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
57332 Author: Stefan Roese <sr@denx.de>
57333 Date: Wed Nov 29 15:42:37 2006 +0100
57335 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
57337 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
57338 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
57339 quite similar and share the same board directory "prodrive/p3mx"
57340 and the same config file "p3mx.h".
57342 Signed-off-by: Stefan Roese <sr@denx.de>
57344 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
57345 Author: Stefan Roese <sr@denx.de>
57346 Date: Wed Nov 29 12:53:15 2006 +0100
57348 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
57350 In the bootvx command the load address was only read from the env
57351 variable "loadaddr" and not optionally passed as paramter as described
57352 in the help. This is fixed with this patch. The behaviour is now the
57353 same as in the bootelf command.
57355 Signed-off-by: Stefan Roese <sr@denx.de>
57357 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
57358 Author: Stefan Roese <sr@denx.de>
57359 Date: Wed Nov 29 12:03:57 2006 +0100
57361 [PATCH] include/ppc440.h minor error affecting interrupts
57363 Fixed include/ppc440.c for UIC address Bug
57365 Corrects bug affecting the addresses for the universal interrupt
57366 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
57368 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
57369 Signed-off-by: Stefan Roese <sr@denx.de>
57371 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
57372 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
57373 Date: Tue Nov 28 16:17:27 2006 -0600
57375 Make fsl-i2c not conflict with SOFT I2C
57377 Signed-off-by: Timur Tabi <timur@freescale.com>
57379 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
57380 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
57381 Date: Tue Nov 28 16:17:18 2006 -0600
57383 Fix I2C master address initialization.
57385 Signed-off-by: Timur Tabi <timur@freescale.com>
57387 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
57388 Author: Kim Phillips <kim.phillips@freescale.com>
57389 Date: Tue Nov 28 23:31:19 2006 -0600
57391 Assign maintainers for mpc8349emds and mpc8360emds
57393 Dave for mpc8360emds, and me for mpc8349emds.
57395 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
57396 Author: Kim Phillips <kim.phillips@freescale.com>
57397 Date: Tue Nov 28 23:28:33 2006 -0600
57399 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
57401 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
57402 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
57404 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
57405 Author: Timur Tabi <timur@freescale.com>
57406 Date: Tue Nov 28 12:09:35 2006 -0600
57408 mpc83xx: Miscellaneous code style fixes
57410 Implement various code style fixes and similar changes.
57412 Signed-off-by: Timur Tabi <timur@freescale.com>
57414 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
57415 Author: Stefan Roese <sr@denx.de>
57416 Date: Tue Nov 28 17:55:49 2006 +0100
57418 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
57420 This patch adds the code and configuration necessary to boot with an
57421 arch/powerpc Linux kernel.
57423 Signed-off-by: Grant Likely <grant.likely@gmail.com>
57424 Acked-by: Jon Loeliger <jdl@freescale.com>
57426 commit e732faec95a83cb468b4850ae807c8301dde8f6a
57427 Author: Stefan Roese <sr@denx.de>
57428 Date: Tue Nov 28 16:09:24 2006 +0100
57430 [PATCH] PPC4xx: 440SP Rev. C detection added
57432 Signed-off-by: Stefan Roese <sr@denx.de>
57434 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
57435 Author: Stefan Roese <sr@denx.de>
57436 Date: Tue Nov 28 11:04:45 2006 +0100
57438 [PATCH] nand: Fix patch merge problem
57440 Signed-off-by: Stefan Roese <sr@denx.de>
57442 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
57443 Author: Stefan Roese <sr@denx.de>
57444 Date: Tue Nov 28 11:04:45 2006 +0100
57446 [PATCH] nand: Fix patch merge problem
57448 Signed-off-by: Stefan Roese <sr@denx.de>
57450 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
57451 Author: Wolfgang Denk <wd@pollux.denx.de>
57452 Date: Mon Nov 27 22:53:53 2006 +0100
57456 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
57457 Author: Stefan Roese <sr@denx.de>
57458 Date: Mon Nov 27 17:43:25 2006 +0100
57460 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
57462 Patch below corrects the setting of the zmiifer register, it was
57463 overwritting the register rather than ORing the settings.
57465 Signed-off-by: Neil Wilson <NWilson@airspan.com>
57466 Signed-off-by: Stefan Roese <sr@denx.de>
57468 commit d1a72545296800b7e219f93104ad5836f0003d66
57469 Author: Stefan Roese <sr@denx.de>
57470 Date: Mon Nov 27 17:34:10 2006 +0100
57472 [PATCH] Select NAND embedded environment from board configuration
57474 The current NAND Bootloader setup forces the environment
57475 variables to be in line with the bootloader. This change
57476 enables the configuration to be made in the board include
57477 file instead so that it can be individually enabled.
57479 Signed-off-by: Nick Spence <nick.spence@freescale.com>
57480 Signed-off-by: Stefan Roese <sr@denx.de>
57482 commit 15784862857c3c2214498defcfed84ff137fb81e
57483 Author: Stefan Roese <sr@denx.de>
57484 Date: Mon Nov 27 17:22:19 2006 +0100
57486 [PATCH] nand_wait() timeout fixes
57488 Two fixes for the nand_wait() function in
57489 drivers/nand/nand_base.c:
57491 1. Use correct timeouts. The original timeouts in Linux
57492 source are 400ms and 20ms not 40s and 20s
57494 2. Return correct error value in case of timeout. 0 is
57497 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
57498 Signed-off-by: Stefan Roese <sr@denx.de>
57500 commit da5553b095bf04f4f109ad7e565dae3aba47b230
57501 Author: Stefan Roese <sr@denx.de>
57502 Date: Mon Nov 27 17:04:06 2006 +0100
57504 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
57506 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
57507 arguments to bootm. It removes the getenv("disable_of") test that used
57508 to be used for this purpose.
57510 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
57511 Acked-by: Jon Loeliger <jdl@freescale.com>
57513 commit a9398e018593782c5fa7d0741955fc1256b34c1e
57514 Author: Wolfgang Denk <wd@pollux.denx.de>
57515 Date: Mon Nov 27 15:32:42 2006 +0100
57517 Minor code cleanup. Update CHANGELOG.
57519 commit 1729b92cde575476684bffe819d0b7791b57bff2
57520 Author: Stefan Roese <sr@denx.de>
57521 Date: Mon Nov 27 14:52:04 2006 +0100
57523 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
57525 Signed-off-by: Stefan Roese <sr@denx.de>
57527 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
57528 Author: Stefan Roese <sr@denx.de>
57529 Date: Mon Nov 27 14:49:51 2006 +0100
57531 [PATCH] alpr: remove unused board specific flash driver
57533 Signed-off-by: Stefan Roese <sr@denx.de>
57535 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
57536 Author: Stefan Roese <sr@denx.de>
57537 Date: Mon Nov 27 14:48:41 2006 +0100
57539 [PATCH] 4xx: Fix problem with board specific reset code
57541 Signed-off-by: Stefan Roese <sr@denx.de>
57543 commit ec0c2ec725aec9524a177a77ce75559e644a931a
57544 Author: Stefan Roese <sr@denx.de>
57545 Date: Mon Nov 27 14:46:06 2006 +0100
57547 [PATCH] Remove testing 4xx enet PHY setup
57549 Signed-off-by: Stefan Roese <sr@denx.de>
57551 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
57552 Author: Stefan Roese <sr@denx.de>
57553 Date: Mon Nov 27 14:12:17 2006 +0100
57555 [PATCH] Update Prodrive ALPR board support (440GX)
57557 Signed-off-by: Stefan Roese <sr@denx.de>
57559 commit 58b485776698c3d71ec5a215e392123b4c15afa3
57560 Author: Markus Klotzbuecher <mk@denx.de>
57561 Date: Mon Nov 27 11:51:21 2006 +0100
57563 Add a small README with information on the generic ohci driver.
57565 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
57566 Author: Markus Klotzbuecher <mk@denx.de>
57567 Date: Mon Nov 27 11:46:46 2006 +0100
57569 Fix some endianness issues related to the generic ohci driver
57571 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
57572 Author: Markus Klotzbuecher <mk@denx.de>
57573 Date: Mon Nov 27 11:44:58 2006 +0100
57575 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
57576 to choose between the old and the generic OHCI drivers.
57578 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
57579 Author: Markus Klotzbuecher <mk@denx.de>
57580 Date: Mon Nov 27 11:43:09 2006 +0100
57582 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
57583 and adapted board configs TQM5200 and yosemite accordingly. This commit
57584 also makes the maximum number of root hub ports configurable
57585 (CFG_USB_OHCI_MAX_ROOT_PORTS).
57587 commit 78d620ebb5871d252270dedfad60c6568993b780
57588 Author: Wolfgang Denk <wd@atlas.denx.de>
57589 Date: Thu Nov 23 22:58:58 2006 +0100
57591 Updates for TQM5200 modules:
57592 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
57593 - simplify "udate" definitions
57595 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
57596 Author: Stefan Roese <sr@denx.de>
57597 Date: Wed Nov 22 13:20:50 2006 +0100
57599 [PATCH] PPC4xx start.S: Fix for processor errata
57601 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
57602 errata 1.12: 440_33 by moving patch up in code.
57604 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
57605 Signed-off-by: Stefan Roese <sr@denx.de>
57607 commit 4ef6251403f637841000e0fef9e832aa01339822
57608 Author: Stefan Roese <sr@denx.de>
57609 Date: Mon Nov 20 20:39:52 2006 +0100
57611 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
57613 Signed-off-by: Stefan Roese <sr@denx.de>
57615 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
57616 Author: Wolfgang Denk <wd@pollux.denx.de>
57617 Date: Mon Nov 20 10:28:30 2006 +0100
57621 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
57622 Author: Stefan Roese <sr@denx.de>
57623 Date: Mon Nov 13 13:55:24 2006 +0100
57625 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
57627 * Adds support for AMD command set Top Boot flash geometry reversal
57628 * Adds support for reading JEDEC Manufacturer ID and Device ID
57629 * Adds support for displaying command set, manufacturer id and
57630 device ids (flinfo)
57631 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
57632 * Removes outdated change history (refer to git log instead)
57634 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
57635 Signed-off-by: Stefan Roese <sr@denx.de>
57637 commit b21b511d4c50408f4853f46f06b601272196223f
57638 Author: Wolfgang Denk <wd@pollux.denx.de>
57639 Date: Sun Nov 12 21:13:23 2006 +0100
57643 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
57644 Author: Bartlomiej Sieka <tur@semihalf.com>
57645 Date: Sat Nov 11 22:48:22 2006 +0100
57647 Disable the watchdog in the default config for the V38B board.
57649 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
57650 Author: Bartlomiej Sieka <tur@semihalf.com>
57651 Date: Sat Nov 11 22:43:00 2006 +0100
57653 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
57654 group is enabled for USB earlier (in cpu_init_f() instead of
57655 usb_lowlevel_init()).
57657 commit 91650b3e4de688038d4f71279c44858e3e2c6870
57658 Author: Wolfgang Denk <wd@pollux.denx.de>
57659 Date: Mon Nov 6 17:06:36 2006 +0100
57661 Sequential accesses to non-existent memory must be synchronized,
57662 at least on G2 cores.
57664 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
57666 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
57667 Author: Timur Tabi <timur@freescale.com>
57668 Date: Fri Nov 3 19:15:00 2006 -0600
57670 mpc83xx: Update 83xx to use fsl_i2c.c
57672 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
57673 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
57674 Added multiple I2C bus support to fsl_i2c.c.
57676 Signed-off-by: Timur Tabi <timur@freescale.com>
57678 commit d239d74b1c937984bc519083a8e7de373a390f06
57679 Author: Timur Tabi <timur@freescale.com>
57680 Date: Fri Nov 3 12:00:28 2006 -0600
57682 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
57684 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
57685 tree matches the other 8xxx trees.
57687 Signed-off-by: Timur Tabi <timur@freescale.com>
57689 commit f7fb2e703ec9688541416962724adff70a7322cb
57690 Author: Kim Phillips <kim.phillips@freescale.com>
57691 Date: Thu Nov 2 19:47:11 2006 -0600
57693 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
57695 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
57696 Author: Dave Liu <daveliu@freescale.com>
57697 Date: Thu Nov 2 18:05:50 2006 -0600
57699 mpc83xx: Fix the incorrect dcbz operation
57701 The 834x rev1.x silicon has one CPU5 errata.
57703 The issue is when the data cache locked with
57704 HID0[DLOCK], the dcbz instruction looks like no-op inst.
57706 The right behavior of the data cache is when the data cache
57707 Locked with HID0[DLOCK], the dcbz instruction allocates
57710 The 834x rev3.0 and later and 8360 have not this bug inside.
57712 So, when 834x rev3.0/8360 are working with ECC, the dcbz
57713 instruction will corrupt the stack in cache, the processor will
57716 However, the 834x rev1.x can work with ECC with these code,
57717 because the sillicon has this cache bug. The dcbz will not
57718 corrupt the stack in cache.
57719 Really, it is the fault code running on fault sillicon.
57721 This patch fix the incorrect dcbz operation. Instead of
57722 CPU FP writing to initialise the ECC.
57725 * Fix the incorrect dcbz operation instead of CPU FP
57726 writing to initialise the ECC memory. Otherwise, it
57727 will corrupt the stack in cache, The processor will checkstop
57730 Signed-off-by: Dave Liu <daveliu@freescale.com>
57732 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
57733 Author: Kim Phillips <kim.phillips@freescale.com>
57734 Date: Wed Nov 1 00:10:40 2006 -0600
57736 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
57738 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
57739 STDOUT_PATH configuration bits to mpc8349emds,
57740 mpc8349itx, and mpc8360emds board code.
57742 redo environment to use bootm with the fdtaddr
57743 for booting ARCH=powerpc kernels by default,
57744 and provide default fdtaddr values.
57746 commit 48041365b3420589ad464ebc7752e0053538b729
57747 Author: Kim Phillips <kim.phillips@freescale.com>
57748 Date: Wed Nov 1 00:07:25 2006 -0600
57750 mpc83xx: change ft code to modify local-mac-address property
57752 Update 83xx OF code to update local-mac-address properties
57753 for ethernet instead of the obsolete 'address' property.
57755 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
57756 Author: Timur Tabi <timur@freescale.com>
57757 Date: Tue Oct 31 21:23:16 2006 -0600
57759 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
57761 This patch also adds an improved I2C set_speed(), which handles all clock
57764 Signed-off-by: Timur Tabi <timur@freescale.com>
57766 commit ac4b5622ce050b5ee1e154b98df630d778661632
57767 Author: Dave Liu <daveliu@freescale.com>
57768 Date: Tue Oct 31 19:54:59 2006 -0600
57770 mpc83xx: add the README.mpc8360emds
57772 add doc/README.mpc8360emds to accompany the new board support
57774 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
57775 Author: Dave Liu <daveliu@freescale.com>
57776 Date: Fri Nov 3 12:11:15 2006 -0600
57778 mpc83xx: add QE ethernet support
57780 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
57782 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
57783 Author: Dave Liu <daveliu@freescale.com>
57784 Date: Fri Nov 3 19:33:44 2006 -0600
57786 mpc83xx: Add MPC8360EMDS basic board support
57788 Add support for the Freescale MPC8360EMDS board.
57789 Includes DDR, DUART, Local Bus, PCI.
57791 commit 23892e49352de74f7fac36ff90bb1be143d195e3
57792 Author: Dave Liu <daveliu@freescale.com>
57793 Date: Tue Oct 31 19:30:40 2006 -0600
57795 mpc83xx: add the QUICC Engine (QE) immap file
57797 common QE immap file. Also required for 8360.
57799 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
57800 Author: Dave Liu <daveliu@freescale.com>
57801 Date: Tue Oct 31 19:25:38 2006 -0600
57803 mpc83xx: Add 8360 specifics to 83xx immap
57805 Mainly add QE device dependencies, with appropriate 8360 protection.
57808 commit 988833324a7fda482c8ac3ca23eb539f8232e404
57809 Author: Timur Tabi <timur@freescale.com>
57810 Date: Tue Oct 31 19:14:41 2006 -0600
57812 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
57814 PREREQUISITE PATCHES:
57816 * This patch can only be applied after the following patches have been applied:
57818 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
57819 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
57823 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
57824 the clock for the 2nd USB board (Linux kernel will hang otherwise),
57825 and fix the CONFIG_BOOTARGS macro.
57827 Signed-off-by: Timur Tabi <timur@freescale.com>
57829 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
57830 Author: Timur Tabi <timur@freescale.com>
57831 Date: Tue Oct 31 18:44:42 2006 -0600
57833 mpc83xx: Add support for the MPC8349E-mITX
57835 PREREQUISITE PATCHES:
57837 * This patch can only be applied after the following patches have been applied:
57839 1) DNX#2006090742000024 "Add support for multiple I2C buses"
57840 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
57841 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
57842 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
57843 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
57847 * Add support for the Freescale MPC8349E-mITX reference design platform.
57848 The second TSEC (Vitesse 7385 switch) is not supported at this time.
57850 Signed-off-by: Timur Tabi <timur@freescale.com>
57852 commit 183da6d9b446cc12123455844ad1187e2375626f
57853 Author: Ben Warren <bwarren@qstreams.com>
57854 Date: Tue Sep 12 10:15:53 2006 -0400
57856 Additional MPC8349 support for multibus i2c
57860 Here is a patch for a file that was accidentally left out of a previous
57863 It accompanies the patch with ticket DNX#2006090742000024
57866 Change PCI initialization to use new multi-bus I2C API.
57871 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
57872 Author: Ben Warren <bwarren@qstreams.com>
57873 Date: Thu Sep 7 16:51:04 2006 -0400
57875 Multi-bus I2C implementation of MPC834x
57879 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
57880 family and the MPC8349EMDS board in particular.
57881 This patch requires Patch 1 (Add support for multiple I2C buses).
57882 Testing was performed on a 533MHz board.
57884 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
57886 Signed-off-by: Ben Warren <bwarren@qstreams.com>
57889 Implemented driver-level code to support two I2C buses on the
57890 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
57891 are 50kHz, 100kHz and 400kHz on each bus.
57896 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
57897 Author: Ben Warren <bwarren@qstreams.com>
57898 Date: Thu Sep 7 16:50:54 2006 -0400
57900 Add support for multiple I2C buses
57904 Attached is a patch providing support for multiple I2C buses at the
57905 command level. The second part of the patch includes an implementation
57906 for the MPC834x CPU and MPC8349EMDS board.
57908 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
57910 Signed-off-by: Ben Warren <bwarren@qstreams.com>
57914 1. Include new 'i2c' command (based on USB implementation) using
57915 CONFIG_I2C_CMD_TREE.
57917 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
57918 the commands to change bus number and speed are only available under the
57919 new 'i2c' command mentioned in the first bullet.
57921 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
57922 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
57923 of an array of bus-device pairs. Otherwise, it is an array of uchar.
57926 Added new 'i2c' master command for all I2C interaction. This is
57927 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
57928 setting I2C bus speed as well as changing the active bus if the board
57929 has more than one (conditionally compiled with
57930 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
57936 commit bed85caf872714ebf53013967a695c9d63acfc68
57937 Author: Timur Tabi <timur@freescale.com>
57938 Date: Tue Oct 31 18:13:36 2006 -0600
57940 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
57944 * Errata DDR6, which affects all current MPC 834x processors, lists changes
57945 required to maintain compatibility with various types of DDR memory. This
57946 patch implements those changes.
57948 Signed-off-by: Timur Tabi <timur@freescale.com>
57950 commit afd6e470f639883002c7c59d562690a5cb0f4865
57951 Author: Timur Tabi <timur@freescale.com>
57952 Date: Wed Oct 25 18:45:23 2006 -0500
57954 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
57956 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
57957 Author: Timur Tabi <timur@freescale.com>
57958 Date: Tue Aug 22 17:07:00 2006 -0500
57960 mpc83xx: Add support for variable flash memory sizes on 83xx systems
57964 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
57965 window registers, instead of using a hard-coded value of 8MB.
57967 Signed-off-by: Timur Tabi <timur@freescale.com>
57969 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
57970 Author: Tanya Jiang <tanya.jiang@freescale.com>
57971 Date: Thu Aug 3 18:38:13 2006 +0800
57973 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
57975 Unified TQM834x variable names with 83xx and consolidated macro
57976 in preparation for the 8360 and other upcoming 83xx devices.
57978 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
57980 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
57981 Author: Dave Liu <daveliu@freescale.com>
57982 Date: Wed Oct 25 14:41:21 2006 -0500
57984 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
57986 Incorporated the common unified variable names and the changes in preparation
57987 for releasing mpc8360 patches.
57989 Signed-off-by: Dave Liu <daveliu@freescale.com>
57991 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
57992 Author: Tanya Jiang <tanya.jiang@freescale.com>
57993 Date: Thu Aug 3 18:36:02 2006 +0800
57995 mpc83xx: Fix missing build for mpc8349emds pci.c
57997 Make pci build for mpc8349emds
57999 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
58001 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
58002 Author: Tanya Jiang <tanya.jiang@freescale.com>
58003 Date: Thu Aug 3 18:39:49 2006 +0800
58005 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
58007 Removed unused file resetvec.S for mpc83xx cpu
58009 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
58011 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
58012 Author: Nick Spence <Nick.Spence@freescale.com>
58013 Date: Sat Sep 30 00:32:59 2006 -0700
58015 NAND Flash verify across block boundaries
58017 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
58019 and the write crosses a block boundary. The pointer to the verification
58020 buffer (bufstart) is not being updated to reflect the starting of the
58022 block so the verification of the second block fails.
58026 * Fix NAND FLASH page verification across block boundaries
58028 commit f484dc791a3932537213c43c654cc1295c64b84c
58029 Author: Nick Spence <nick.spence@freescale.com>
58030 Date: Thu Sep 7 07:39:46 2006 -0700
58032 Added RGMII support to the TSECs and Marvell 881111 Phy
58034 Added a phy initialization to adjust the RGMII RX and TX timing
58035 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
58037 Signed-off-by: Nick Spence <nick.spence@freescale.com>
58039 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
58040 Author: roy zang <tie-fei.zang@freescale.com>
58041 Date: Fri Nov 3 13:10:00 2006 +0800
58043 Remove some unused CFG define.
58044 undef CFG_DRAM_TEST
58046 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
58047 Author: roy zang <tie-fei.zang@freescale.com>
58048 Date: Fri Nov 3 13:07:36 2006 +0800
58050 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
58051 Both work. 0xFF000000 seems more reasonable.
58053 commit c59200443072353044aa4bf737a5a60f9a9af231
58054 Author: Wolfgang Denk <wd@pollux.denx.de>
58055 Date: Thu Nov 2 15:15:01 2006 +0100
58057 Release U-Boot 1.1.6
58059 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
58060 Author: roy zang <tie-fei.zang@freescale.com>
58061 Date: Thu Nov 2 19:14:48 2006 +0800
58063 This patch comes from Yuli's posted patch on 8/8/2006
58064 titled "CFI Driver Little-Endian write Issue".
58066 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
58068 If that patch applied, please discard this one.
58069 Until now , I do not see his patch is applied. So please apply this one.
58071 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
58072 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58074 commit b825f158e449e1e9cf74c08e572955e122394c96
58075 Author: roy zang <tie-fei.zang@freescale.com>
58076 Date: Thu Nov 2 19:12:31 2006 +0800
58078 Tsi108 on chip i2c support.
58080 The i2c Interface provides a master-only, serial interface that can be
58081 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
58084 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58085 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58087 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
58088 Author: roy zang <tie-fei.zang@freescale.com>
58089 Date: Thu Nov 2 19:11:06 2006 +0800
58091 Tsi108 on chip pci controller support.
58093 If there is no pci card, the tsi108/109 pci configure read will
58094 cause a machine check exception to the processor. PCI error should
58095 also be cleared after the read.
58097 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58098 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58100 commit d1927cee977126e547ceeba23e4f978f377cfb8f
58101 Author: roy zang <tie-fei.zang@freescale.com>
58102 Date: Thu Nov 2 19:08:55 2006 +0800
58104 Tundra tsi108 on chip Ethernet controller support.
58106 The following is a brief description of the Ethernet controller:
58107 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
58108 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
58109 to manage the two physical connection devices (PHYs). Each Ethernet port
58110 has its own statistics monitor that tracks and reports key interface
58111 statistics. Each port supports a 256-entry hash table for address
58112 filtering. In addition, each port is bridged to the Switch Fabric
58113 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
58115 Each Ethernet port also has a pair of internal Ethernet DMA channels to
58116 support the transmit and receive data flows. The Ethernet DMA channels
58117 use descriptors set up in memory, the memory map of the device, and
58118 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
58119 handles arbitration for the Switch Fabric. The Controller also
58120 has a register businterface for register accesses and status monitor
58123 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
58124 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
58125 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
58126 data flows to and from the Ethernet Controller through the Switch Fabric.
58128 Each Ethernet port uses its transmit and receive DMA channels to manage
58129 data flows through buffer descriptors that are predefined by the
58130 system (the descriptors can exist anywhere in the system memory map).
58131 These descriptors are data structures that point to buffers filled
58132 with data ready to transmit over Ethernet, or they point to empty
58133 buffers ready to receive data from Ethernet.
58135 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58136 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58138 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
58139 Author: roy zang <tie-fei.zang@freescale.com>
58140 Date: Thu Nov 2 19:01:33 2006 +0800
58142 Tundra tsi108 header file.
58144 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
58145 PowerPC processors that offers numerous system interconnect options for
58146 embedded application designers. The Tsi108 can interconnect 60x or
58147 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
58148 and Flash. Provided the macro define for tsi108 chip.
58150 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58151 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58153 commit 87c4db09699c6b89176b31004afcb83eb1585d47
58154 Author: roy zang <tie-fei.zang@freescale.com>
58155 Date: Thu Nov 2 18:59:15 2006 +0800
58157 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
58158 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
58160 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58161 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58163 commit 27801b8ab11c61b577e45742a515bb3b23b80241
58164 Author: roy zang <tie-fei.zang@freescale.com>
58165 Date: Thu Nov 2 18:57:21 2006 +0800
58167 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
58168 Make ,config.mk and link file for the mpc7448hpc2 board.
58170 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58171 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58173 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
58174 Author: roy zang <tie-fei.zang@freescale.com>
58175 Date: Thu Nov 2 18:55:04 2006 +0800
58177 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
58178 The mpc7448hpc2 board support header file.
58180 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58181 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58183 commit 625bb5ddb50b243f931262ca8c46956409471917
58184 Author: roy zang <tie-fei.zang@freescale.com>
58185 Date: Thu Nov 2 18:52:21 2006 +0800
58187 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
58188 The mpc7448hpc2 board support low level assemble language init code.
58190 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58191 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58193 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
58194 Author: roy zang <tie-fei.zang@freescale.com>
58195 Date: Thu Nov 2 18:49:51 2006 +0800
58197 General code modification for mpc7448hpc2 board support.
58198 1. Add 7447A and 7448 processor support.
58199 2. Add the following flags.
58201 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
58202 (such as by switch on board), this flag should be set.
58204 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
58205 relocates to RAM, this flag should be set.
58207 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
58208 system hang in exception, this flag should be set.
58210 There is a design issue for tsi108/109 pci configure read. When pci scan
58211 the slots, if there is no pci card, the tsi108/9 will cause a machine
58212 check exception for mpc7448 processor.
58214 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
58215 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58217 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
58218 Author: roy zang <tie-fei.zang@freescale.com>
58219 Date: Thu Nov 2 18:34:47 2006 +0800
58221 Add README file for mpc7448hpc2 board.
58222 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
58224 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
58225 Author: Bartlomiej Sieka <tur@semihalf.com>
58226 Date: Wed Nov 1 02:04:38 2006 +0100
58228 Finish up support for MarelV38B board
58229 - add watchdog support
58230 - enable GPIO_WKUP_7 pin for input
58233 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
58234 Author: Bartlomiej Sieka <tur@semihalf.com>
58235 Date: Wed Nov 1 01:45:46 2006 +0100
58237 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
58238 * remove warnings when compiling ethaddr.c
58239 * adjust linker script (fixes a crash resulting from incorrect
58240 definition of __u_boot_cmd_start)
58241 - Some MarelV38B code cleanup.
58243 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
58244 Author: Bartlomiej Sieka <tur@semihalf.com>
58245 Date: Wed Nov 1 01:38:16 2006 +0100
58247 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
58248 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
58249 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
58250 MPC5XXX_WU_GPIO_DATA_O for affected boards.
58252 - Add defintions for some MPC5XXX GPIO pins.
58254 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
58255 Author: Bartlomiej Sieka <tur@semihalf.com>
58256 Date: Wed Nov 1 01:34:29 2006 +0100
58258 Changed MarelV38B board make target to lowercase. Config file cleanup.
58260 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
58261 Author: Wolfgang Denk <wd@pollux.denx.de>
58262 Date: Sun Oct 29 01:03:51 2006 +0200
58264 Automatically adjust ARFLAGS so "make -s" is really silent.
58266 commit fae684e89844856383bdf101440889557df3e6b1
58267 Author: Stefan Roese <sr@denx.de>
58268 Date: Sat Oct 28 16:45:00 2006 +0200
58270 [PATCH] omap925.c: Remove unused functions
58272 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
58273 Signed-off-by: Stefan Roese <sr@denx.de>
58275 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
58276 Author: Stefan Roese <sr@denx.de>
58277 Date: Sat Oct 28 17:12:58 2006 +0200
58279 [PATCH] Add some missing machtypes for netstar & voiceblue boards
58281 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
58284 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
58285 Signed-off-by: Stefan Roese <sr@denx.de>
58287 commit 856f054410cef52d868feb330168b2a4c4091328
58288 Author: Stefan Roese <sr@denx.de>
58289 Date: Sat Oct 28 15:55:52 2006 +0200
58291 [PATCH] NAND: Partition name support added to NAND subsystem
58293 chpart, nboot and NAND subsystem related commands now accept also partition
58294 name to specify offset.
58296 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
58297 Signed-off-by: Stefan Roese <sr@denx.de>
58299 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
58300 Author: Wolfgang Denk <wd@pollux.denx.de>
58301 Date: Sat Oct 28 02:29:44 2006 +0200
58305 commit 2751a95abd1b96911081c357e96a12fa97b40dee
58306 Author: Wolfgang Denk <wd@pollux.denx.de>
58307 Date: Sat Oct 28 02:29:14 2006 +0200
58309 Enable commandline editing and hush shell on all TQM boards.
58311 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
58312 Author: Wolfgang Denk <wd@pollux.denx.de>
58313 Date: Sat Oct 28 02:28:02 2006 +0200
58315 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
58317 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
58318 Author: Wolfgang Denk <wd@denx.de>
58319 Date: Sat Oct 28 01:14:32 2006 +0200
58321 Check for illegal character '=' in environment variable names.
58323 Make sure the string passed as variable name does not contain a '='
58324 character. This not only prevents the common error or typing
58325 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
58326 also closes a backdoor which allowed to delete write-protected
58327 environment variables, for example by using "setenv ethaddr=".
58329 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
58330 Author: Wolfgang Denk <wd@pollux.denx.de>
58331 Date: Sat Oct 28 00:38:39 2006 +0200
58333 Minor code cleanup.
58335 commit e11887a77d81077416a2d1c5e0354916fee8c034
58336 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
58337 Date: Thu Oct 26 17:55:31 2006 +0200
58339 Don't pass any debug options directly to the assembler
58341 When passing the -g option to gcc, gcc automatically selects a
58342 suitable --g<format> option to pass on to the assembler.
58343 Thus, there's no point in forcing a specific debug option on the
58344 assembler using the -Wa mechanism.
58346 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
58348 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
58349 Author: Jon Loeliger <jdl@freescale.com>
58350 Date: Fri Oct 27 07:47:22 2006 -0500
58352 MPC86xx: Cleaned up unused and conditionally used local variables.
58354 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58356 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
58357 Author: Wolfgang Denk <wd@pollux.denx.de>
58358 Date: Fri Oct 27 11:55:21 2006 +0200
58360 Fix "ar" flags in some Makefiles to allow for silent "make -s"
58362 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
58363 Author: Ben Warren <bwarren@qstreams.com>
58364 Date: Thu Oct 26 14:38:25 2006 -0400
58366 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
58367 to a TSEC (e.g. a switch is connected via RMII) or
58368 if the PHY is defective/incorrectly configured.
58370 Signed-off-by: Ben Warren <bwarren@qstreams.com>
58372 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
58373 Author: Ben Warren <bwarren@qstreams.com>
58374 Date: Thu Oct 26 14:38:25 2006 -0400
58376 Fix TSEC driver: avoid crashes if PHY is not attached
58377 to a TSEC (e.g. a switch is connected via RMII) or
58378 if the PHY is defective/incorrectly configured.
58380 Signed-off-by: Ben Warren <bwarren@qstreams.com>
58382 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
58383 Author: Wolfgang Denk <wd@pollux.denx.de>
58384 Date: Thu Oct 26 16:24:31 2006 +0200
58388 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
58389 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
58390 Date: Wed Oct 25 15:48:59 2006 +0200
58392 Finish up support for the ATSTK1000/ATSTK1002 boards
58394 Add atstk1002_config target to Makefile and move the AVR32 section
58395 down below Blackfin so that it doesn't end up in the middle of
58398 Drop the autogenerated linker script thing for now. Will have to
58399 revisit how to handle chips with different flash and RAM layout
58402 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
58404 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
58405 Author: Kumar Gala <galak@kernel.crashing.org>
58406 Date: Tue Oct 24 23:47:37 2006 -0500
58408 Added support for Multi-Image files that contain a device tree
58410 If a Multi-Image file contains a third image we try to use it as a
58411 device tree. The device tree image is assumed to be uncompressed in the
58412 image file. We automatically allocate space for the device tree in memory
58413 and provide an 8k pad to allow more than a reasonable amount of growth.
58415 Additionally, a device tree that was contained in flash will now automatically
58416 get copied to system memory as part of boot. Previously an error was
58417 reported if one tried to boot a device tree that was in flash.
58419 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
58421 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
58422 Author: Wolfgang Denk <wd@denx.de>
58423 Date: Tue Oct 24 21:35:55 2006 +0200
58425 Switch to automatically generated CHANGELOG file.
58426 (use "make CHANGELOG" to update it from time to time)
58428 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
58429 Author: Stefan Roese <sr@denx.de>
58430 Date: Tue Oct 24 18:06:48 2006 +0200
58432 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
58433 Patch by Stefan Roese, 24 Oct 2006
58435 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
58436 Author: Wolfgang Denk <wd@pollux.denx.de>
58437 Date: Tue Oct 24 17:24:55 2006 +0200
58439 Merge with /home/wd/git/u-boot/master
58441 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
58442 Author: Wolfgang Denk <wd@pollux.denx.de>
58443 Date: Tue Oct 24 15:32:57 2006 +0200
58447 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
58448 Author: Wolfgang Denk <wd@pollux.denx.de>
58449 Date: Tue Oct 24 14:51:36 2006 +0200
58451 Move atstk1000 files into vendor specific directory.
58452 Patch by Haavard Skinnemoen, 12 Sep 2006
58454 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
58455 Author: Wolfgang Denk <wd@pollux.denx.de>
58456 Date: Tue Oct 24 14:42:37 2006 +0200
58458 Add ATSTK1000 and ATSTK1002 board support
58459 Patch by Haavard Skinnemoen, 06 Sep 2006
58461 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
58464 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
58465 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
58466 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
58467 CompactFlash cards. For more information, please see this page:
58469 http://www.atmel.com/dyn/products/tools.asp?family_id=682
58471 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
58474 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
58476 commit f93ae788c3640fcde5db383471d45548ff4060d0
58477 Author: Wolfgang Denk <wd@pollux.denx.de>
58478 Date: Tue Oct 24 14:31:24 2006 +0200
58480 Add common serial driver for Atmel AT32 and AT91 chips
58481 Patch by Haavard Skinnemoen, 06 Sep 2006
58483 This is a first attempt at creating a common serial driver for Atmel
58484 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
58485 be possible to support AT91RM9200 and other ARM-based chips with some
58486 minor modifications.
58488 There's nothing fundamentally AVR32-specific in this driver, but it
58489 does use some features which are currently only defined for the
58491 * pm_get_clock_freq: Obtain the clock frequency of a given domain
58492 * gd->console_uart: A "struct device" containing information about
58493 register mappings, gpio resources and clocks associated with the
58496 For more information about these features, please see the "AT32AP
58499 commit 72a087e04705c26cad982879ebd06b5281bf825a
58500 Author: Wolfgang Denk <wd@pollux.denx.de>
58501 Date: Tue Oct 24 14:27:35 2006 +0200
58503 Add AT32AP CPU and AT32AP7000 SoC support
58504 Patch by Haavard Skinnemoen, 06 Sep 2006
58506 This patch adds support for the AT32AP CPU family and the AT32AP7000
58507 chip, which is the first chip implementing the AVR32 architecture.
58509 The AT32AP CPU core is a high-performance implementation featuring a
58510 7-stage pipeline, separate instruction- and data caches, and a MMU.
58511 For more information, please see the "AVR32 AP Technical Reference":
58513 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
58515 In addition to this, the AT32AP7000 chip comes with a large set of
58516 integrated peripherals, many of which are shared with the AT91 series
58517 of ARM-based microcontrollers from Atmel. Full data sheet is
58520 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
58522 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
58524 commit 7b64fef33c66be648826c0ff9758298ef13d0604
58525 Author: Wolfgang Denk <wd@pollux.denx.de>
58526 Date: Tue Oct 24 14:21:16 2006 +0200
58528 Add AVR32 architecture support
58529 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
58531 This patch adds common infrastructure code for the Atmel AVR32
58532 architecture. See doc/README.AVR32 for details.
58534 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
58536 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
58537 Author: Wolfgang Denk <wd@pollux.denx.de>
58538 Date: Tue Oct 24 13:57:33 2006 +0200
58540 Use -g instead of -gstabs in AFLAGS_DEBUG
58541 Patch by Haavard Skinnemoen, 30 Aug 2006
58543 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
58544 matter what the target's preferred debugging format is. This patch
58545 simply replaces -gstabs with -g, so that the default debugging format
58546 for the architecture is used.
58548 commit 965829872169c2996023840d98e1d85ad148d629
58549 Author: Wolfgang Denk <wd@pollux.denx.de>
58550 Date: Tue Oct 24 13:55:18 2006 +0200
58552 Fix/workaround broken dependency handling with make 3.81
58553 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
58555 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
58556 Author: Marian Balakowicz <m8@semihalf.com>
58557 Date: Mon Oct 23 22:17:05 2006 +0200
58559 Fix sequoia separate object direcory building problems.
58561 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
58562 Author: Jon Loeliger <jdl@freescale.com>
58563 Date: Fri Oct 20 17:16:35 2006 -0500
58565 Use generic I2C register block on 85xx and 86xx.
58567 Replace private IMMAP I2C structures with generic reg block
58568 and allow 86xx to have multiple I2C device busses.
58570 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58572 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
58573 Author: Jon Loeliger <jdl@freescale.com>
58574 Date: Fri Oct 20 15:54:34 2006 -0500
58576 Fix compilation warnings on a few 85xx boards.
58578 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58580 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
58581 Author: Jon Loeliger <jdl@freescale.com>
58582 Date: Fri Oct 20 15:50:15 2006 -0500
58584 Converted all 85xx boards to use a common FSL I2C driver.
58585 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
58586 And removed hard i2c path from a few u-boot.lds scipts too.
58587 Minor whitespace cleanups along the way.
58589 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58591 commit 4d45f69e362b05892c9e92a7907e5820995612aa
58592 Author: Jon Loeliger <jdl@freescale.com>
58593 Date: Thu Oct 19 12:02:24 2006 -0500
58595 Rewrite a series of goto statements as a sequences of
58596 conditional expressions instead.
58598 Use consistent return code 0/-1 for good/bad indicators.
58600 Include one fewer file if the driver isn't used at all.
58602 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58604 commit 7237c033b02fe295880435f1eb80819a0c987532
58605 Author: Jon Loeliger <jdl@freescale.com>
58606 Date: Thu Oct 19 11:02:16 2006 -0500
58608 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
58610 in an effort to begin to unify the umpteen FSL I2C drivers that
58611 are all otherwise very similar.
58613 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58615 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
58616 Author: Jon Loeliger <jdl@freescale.com>
58617 Date: Thu Oct 19 11:33:52 2006 -0500
58619 * Fix a bunch of compiler warnings for gcc 4.0
58621 Signed-off-by: Matthew McClintock <msm@freescale.com>
58623 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
58624 Author: Stefan Roese <sr@denx.de>
58625 Date: Tue Oct 17 06:14:31 2006 +0200
58627 Add monitor functions for indirect access to PPC440 DCR's
58628 Patch by Leonid Baryudin, 12 Oct 2006
58630 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
58631 Author: Jon Loeliger <jdl@freescale.com>
58632 Date: Fri Oct 13 16:47:53 2006 -0500
58634 Fixed leading whitespace issues.
58635 Removed spurious LAWAR thing.
58637 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58639 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
58640 Author: Jon Loeliger <jdl@freescale.com>
58641 Date: Thu Oct 12 10:42:36 2006 -0500
58643 Remove unneeded include files and local variable.
58645 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58647 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
58648 Author: Grant Likely <grant.likely@secretlab.ca>
58649 Date: Tue Oct 10 00:23:32 2006 -0600
58651 Fix possible uninitialized variable compiler warning.
58653 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
58654 do_bootm_linux() may be uninitialized. There is no possibility in the
58655 current code that len will get used uninitialized, but this fix follows
58656 the existing convention of setting both len and data to zero at the same
58659 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
58661 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
58662 Author: Matthew McClintock <msm@freescale.com>
58663 Date: Wed Oct 11 15:13:01 2006 -0500
58665 * Fix a bunch of compiler warnings for gcc 4.0
58667 Signed-off-by: Matthew McClintock <msm@freescale.com>
58669 commit bf651baa365e5447246aad6a633ccd667cf24a39
58670 Author: Jon Loeliger <jdl@freescale.com>
58671 Date: Wed Oct 11 10:10:43 2006 -0500
58673 Move "ar" flags to config.mk to allow for silent "make -s"
58675 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
58676 Author: Jon Loeliger <jdl@freescale.com>
58677 Date: Tue Oct 10 17:19:03 2006 -0500
58679 Coding style changes to remove local varible blocks
58680 and reformat a bit nicer.
58682 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
58683 Author: Jon Loeliger <jdl@freescale.com>
58684 Date: Tue Oct 10 17:16:04 2006 -0500
58686 Fix whitespace issues.
58688 commit 7b382b7125f2397cce63253df62f183e3dfa2770
58689 Author: Jon Loeliger <jdl@freescale.com>
58690 Date: Tue Oct 10 17:14:45 2006 -0500
58692 Fix whitespace issues.
58694 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
58695 Author: Jon Loeliger <jdl@freescale.com>
58696 Date: Tue Oct 10 17:06:53 2006 -0500
58698 Fix whitespace issues.
58700 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
58701 Author: Jon Loeliger <jdl@freescale.com>
58702 Date: Tue Oct 10 17:03:43 2006 -0500
58704 Ran lindent and cleaned up whitespace issues.
58705 Format for 80-columns too.
58707 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
58708 Author: Jon Loeliger <jdl@freescale.com>
58709 Date: Tue Oct 10 17:02:22 2006 -0500
58711 Fix whitespace and 80-col issues.
58713 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
58714 Author: Stefan Roese <sr@denx.de>
58715 Date: Sat Oct 7 11:36:51 2006 +0200
58717 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
58718 Patch by Stefan Roese, 07 Oct 2006
58720 commit 5bc528fa4da751d472397b308137238a6465afd2
58721 Author: Stefan Roese <sr@denx.de>
58722 Date: Sat Oct 7 11:35:25 2006 +0200
58724 Update ALPR code (NAND support working now)
58725 Patch by Stefan Roese, 07 Oct 2006
58727 commit 77d5034847d328753b80c46b83f960a14a26f40e
58728 Author: Stefan Roese <sr@denx.de>
58729 Date: Sat Oct 7 11:33:03 2006 +0200
58731 Remove compile warnings in fpga code
58732 Patch by Stefan Roese, 07 Oct 2006
58734 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
58735 Author: Stefan Roese <sr@denx.de>
58736 Date: Sat Oct 7 11:30:52 2006 +0200
58738 Add CONFIG_BOARD_RESET to configure board specific reset function
58739 Patch by Stefan Roese, 07 Oct 2006
58741 commit f55df18187e7a45cb73fec4370d12135e6691ae1
58742 Author: John Traill <john.traill@freescale.com>
58743 Date: Fri Sep 29 08:23:12 2006 +0100
58745 Fix missing tCycle/modfreq calculation.
58747 Signed-off-by: John Traill <john.traill@freescale.com>
58749 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
58750 Author: Andy Fleming <afleming@freescale.com>
58751 Date: Wed Sep 13 10:33:35 2006 -0500
58753 Updated config headers to add default FDT-based booting
58755 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
58756 Author: Andy Fleming <afleming@freescale.com>
58757 Date: Wed Sep 13 10:34:18 2006 -0500
58759 Add support for eTSEC 3 & 4 on 8548 CDS
58761 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
58762 This will only work on rev 1.3 boards (but doesn't break older boards)
58763 * Cleaned up some comments to reflect the expanded role of tsec
58766 commit 084d648b109c8984f83674043c1a7fa3885ef801
58767 Author: Andy Fleming <afleming@freescale.com>
58768 Date: Wed Sep 13 10:33:56 2006 -0500
58770 Added code to support 2.6.18 PCI changes in u-boot
58772 * Added code to swizzle the IRQ map for the PCI
58774 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
58775 Author: Jon Loeliger <jdl@freescale.com>
58776 Date: Tue Sep 19 09:34:10 2006 -0500
58778 Modified makefile for new build mechanism.
58780 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58782 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
58783 Author: Jon Loeliger <jdl@freescale.com>
58784 Date: Thu Sep 14 08:40:36 2006 -0500
58786 Handle 86xx SVR values according to the new Reference Manual.
58787 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
58788 by the byte in bits 16-23 instead.
58789 Thanks to Jason Jin for noticing.
58791 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58793 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
58794 Author: Zhang Wei <wei.zhang@freescale.com>
58795 Date: Mon Aug 28 14:25:31 2006 +0800
58797 Fixed an OF-tree off-by-one bug when adding a new property name.
58798 This bug will cause the kernel booting to pause a long time.
58800 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
58801 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
58803 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
58804 Author: Jon Loeliger <jdl@freescale.com>
58805 Date: Tue Aug 29 11:05:09 2006 -0500
58807 Remove trailing empty lines.
58809 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
58810 Author: Jon Loeliger <jdl@freescale.com>
58811 Date: Tue Aug 29 09:48:49 2006 -0500
58813 Remove bogus msync and use volatile asm.
58815 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
58816 Author: Jon Loeliger <jdl@freescale.com>
58817 Date: Tue Aug 29 08:17:14 2006 -0500
58819 Add myself as maintainer for MPC8641HPCN.
58821 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
58822 Author: Zhang Wei <wei.zhang@freescale.com>
58823 Date: Mon Aug 28 14:25:31 2006 +0800
58825 Fixed an OF-tree off-by-one bug when adding a new property name.
58826 This bug will cause the kernel booting to pause a long time.
58828 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
58830 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
58831 Author: Haiying Wang <haiying.wang@freescale.com>
58832 Date: Fri Aug 25 14:38:34 2006 -0400
58834 Change ramdiskaddr and dtbaddr
58835 Remove PEX fluff commands.
58837 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
58838 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58840 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
58841 Author: Matthew McClintock <msm@freescale.com>
58842 Date: Wed Aug 23 13:32:45 2006 -0500
58844 * Another small fix for booting with disable_of
58846 Signed-off-by: Matthew McClintock <msm@freescale.com>
58848 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
58849 Author: Jon Loeliger <jdl@freescale.com>
58850 Date: Wed Aug 23 11:04:43 2006 -0500
58852 Cleanup and lindent new AHCI driver.
58854 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
58855 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
58856 Date: Wed Aug 23 19:15:12 2006 +0800
58858 Add AHCI define and sata support for MPC8641HPCN board.
58860 Signed-off-by:Jason Jin<jason.jin@freescale.com>
58862 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
58863 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
58864 Date: Wed Aug 23 19:10:44 2006 +0800
58866 Add AHCI support to u-boot
58868 Add AHCI support in u-boot, enable the sata disk controllers which
58869 following the AHCI protocol.
58871 Signed-off-by:Jason Jin<jason.jin@freescale.com>
58873 commit d8ea2acf5f137cae99417df4f573d036ee384668
58874 Author: Zhang Wei <wei.zhang@freescale.com>
58875 Date: Wed Aug 23 17:54:32 2006 +0800
58877 Add dtb boot-up parameter to default boot commands.
58879 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
58881 commit b93775c2036b99baa390ea425c4771895bbc63c4
58882 Author: Jon Loeliger <jdl@freescale.com>
58883 Date: Tue Aug 22 18:26:08 2006 -0500
58885 Cleanup even more poorly introduced whitespace.
58887 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
58888 Author: Jon Loeliger <jdl@freescale.com>
58889 Date: Tue Aug 22 18:07:00 2006 -0500
58891 Cleanup more poorly introduced whitespace.
58893 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
58894 Author: Jon Loeliger <jdl@freescale.com>
58895 Date: Tue Aug 22 17:54:05 2006 -0500
58897 Cleanup poorly introduced whitespace.
58899 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
58900 Author: Jon Loeliger <jdl@freescale.com>
58901 Date: Tue Aug 22 12:25:27 2006 -0500
58903 General indent and whitespace cleanups.
58905 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
58906 Author: Jon Loeliger <jdl@freescale.com>
58907 Date: Tue Aug 22 12:06:18 2006 -0500
58909 General indent and whitespace cleanups.
58911 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
58912 Author: Jon Loeliger <jdl@freescale.com>
58913 Date: Tue Aug 22 10:42:21 2006 -0500
58915 Cleanup compiler warnings.
58917 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
58918 Author: Matthew McClintock <msm@freescale.com>
58919 Date: Tue Aug 22 09:31:59 2006 -0500
58921 Fix disable_of booting
58923 Signed-off-by: Matthew McClintock <msm@freescale.com>
58925 commit 87a449c8ac396420cb24260f717ea9e6faa82047
58926 Author: Matthew McClintock <msm@freescale.com>
58927 Date: Tue Aug 22 09:23:55 2006 -0500
58929 Support for FDT in uImage format, error when using FDT from flash
58931 Signed-off-by: Matthew McClintock <msm@freescale.com>
58933 commit 75c299c38369d01addd5e054b8a16217b70f4a86
58934 Author: Haiying Wang <haiying.wang@freescale.com>
58935 Date: Tue Aug 15 15:12:55 2006 -0400
58937 Unlock cache before kernel starts up for MPC86xx
58939 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
58940 Author: Haiying Wang <haiying.wang@freescale.com>
58941 Date: Tue Aug 15 15:13:15 2006 -0400
58943 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
58945 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
58946 Author: Haiying Wang <haiying.wang@freescale.com>
58947 Date: Tue Aug 15 15:12:55 2006 -0400
58949 Unlock cache before kernel starts up for MPC86xx
58951 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
58952 Author: Haiying Wang <haiying.wang@freescale.com>
58953 Date: Tue Aug 15 15:13:15 2006 -0400
58955 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
58957 commit 86c8e17f25e972a7e272950a0735fad84e082b88
58958 Author: Matthew McClintock <msm@freescale.com>
58959 Date: Wed Aug 16 13:59:47 2006 -0500
58961 * Fix disable_of booting
58963 Signed-off-by: Matthew McClintock <msm@freescale.com>
58965 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
58966 Author: Matthew McClintock <msm@freescale.com>
58967 Date: Wed Aug 16 10:54:09 2006 -0500
58969 * Support for FDT in uImage format, error when using FDT from flash
58971 Signed-off-by: Matthew McClintock <msm@freescale.com>
58973 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
58974 Author: Stefan Roese <sr@denx.de>
58975 Date: Tue Aug 15 14:22:35 2006 +0200
58977 Add initial support for the ALPR board from Prodrive
58978 NAND needs some additional testing
58979 Patch by Heiko Schocher, 15 Aug 2006
58981 commit f0ff4692ff3372dec55074a8eb444943ab095abb
58982 Author: Stefan Roese <sr@denx.de>
58983 Date: Tue Aug 15 14:15:51 2006 +0200
58985 Add FPGA Altera Cyclone 2 support
58986 Patch by Heiko Schocher, 15 Aug 2006
58988 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
58989 Author: Jon Loeliger <jdl@freescale.com>
58990 Date: Mon Aug 14 15:33:38 2006 -0500
58992 Fix BAT0 to actually be cacheable, non-guarded as documented.
58994 Signed-off-by: Jon Loeliger <jdl@freescale.com>
58996 commit 40bc83559db5745681909fd7382ae509567e116d
58997 Author: Jon Loeliger <jdl@freescale.com>
58998 Date: Wed Aug 9 15:32:16 2006 -0500
59000 Removed MPC8641HPCN DTS source file from build.
59001 It is no longer linked into U-Boot; its sources are
59002 now located in the kernel tree.
59004 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59006 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
59007 Author: Matthew McClintock <msm@freescale.com>
59008 Date: Wed Jun 28 10:47:03 2006 -0500
59010 * Switched default PCI speed for 8540 ADS back to 33MHz
59012 * Added comments and a printf to warn that PCI-X won't
59014 Patch by Andy Fleming 17-Mar-2006
59016 Signed-off-by: Andy Fleming <afleming@freescale.com>
59018 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
59019 Author: Matthew McClintock <msm@freescale.com>
59020 Date: Wed Jun 28 10:46:35 2006 -0500
59022 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
59024 Signed-off-by: Andy Fleming <afleming@freescale.com>
59026 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
59027 Author: Matthew McClintock <msm@freescale.com>
59028 Date: Wed Jun 28 10:46:13 2006 -0500
59030 * Added VIA configuration table
59032 * Added support for PCI2 on CDS
59033 Patch by Andy Fleming 17-Mar-2006
59035 Signed-off-by: Andy Fleming <afleming@freescale.com>
59037 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
59038 Author: Matthew McClintock <msm@freescale.com>
59039 Date: Wed Jun 28 10:45:41 2006 -0500
59041 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
59043 Signed-off-by: Andy Fleming <afleming@freescale.com>
59045 commit 97074ed9655309b64231bc2cee69fe85399f8055
59046 Author: Matthew McClintock <msm@freescale.com>
59047 Date: Wed Jun 28 10:45:17 2006 -0500
59049 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
59051 Signed-off-by: Andy Fleming <afleming@freescale.com>
59053 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
59054 Author: Matthew McClintock <msm@freescale.com>
59055 Date: Wed Jun 28 10:44:49 2006 -0500
59057 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
59059 Signed-off-by: Andy Fleming <afleming@freescale.com>
59061 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
59062 Author: Matthew McClintock <msm@freescale.com>
59063 Date: Wed Jun 28 10:44:23 2006 -0500
59065 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
59067 Signed-off-by: Andy Fleming <afleming@freescale.com>
59069 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
59070 Author: Matthew McClintock <msm@freescale.com>
59071 Date: Wed Jun 28 10:43:36 2006 -0500
59073 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
59075 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59077 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
59078 Author: Matthew McClintock <msm@freescale.com>
59079 Date: Wed Jun 28 10:43:00 2006 -0500
59081 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
59083 commit 5498d90312aad9f6bdbf047986027c35b03cd163
59084 Author: Matthew McClintock <msm@freescale.com>
59085 Date: Wed Jun 28 10:42:24 2006 -0500
59087 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
59089 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
59090 Author: Matthew McClintock <msm@freescale.com>
59091 Date: Wed Jun 28 10:41:37 2006 -0500
59093 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
59095 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
59096 Author: John Traill <john.traill@freescale.com>
59097 Date: Wed Aug 9 14:33:50 2006 +0100
59099 Add Rapidio support for the MPC8641HPCN
59101 Signed-off-by: John Traill <john.traill@freescale.com>
59103 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
59104 Author: John Traill <john.traill@freescale.com>
59105 Date: Tue Aug 8 11:32:43 2006 +0100
59107 Fix caslat calculation
59109 Signed-off-by: John Traill <john.traill@freescale.com>
59111 commit 709d3073e74153278e7904a70819bbef7df50e1a
59112 Author: Jon Loeliger <jdl@freescale.com>
59113 Date: Thu Aug 3 16:17:56 2006 -0500
59115 Convert to mac-address in ethernet nodes.
59117 commit 71748af833ca1017edf1415be376366ff2937d17
59118 Author: Haiying Wang <haiying.wang@freescale.com>
59119 Date: Fri Jul 28 12:41:35 2006 -0400
59121 Correct the irq value of DUART2
59123 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
59124 Author: Haiying Wang <haiying.wang@freescale.com>
59125 Date: Fri Jul 28 12:41:41 2006 -0400
59127 Change the space size of PEX IO in README
59129 commit 239db37c94f7a92941c4465feceb867c609241c5
59130 Author: Haiying Wang <haiying.wang@freescale.com>
59131 Date: Fri Jul 28 12:41:18 2006 -0400
59133 Move get_board_sys_clk to board directory
59135 commit 492900b985439fbce1a118afde1e35def870db03
59136 Author: John Traill <john.traill@freescale.com>
59137 Date: Fri Jul 28 09:03:54 2006 +0100
59139 Fix 8641HPCN pollution
59141 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
59142 Author: John Traill <john.traill@freescale.com>
59143 Date: Fri Jul 28 08:16:06 2006 +0100
59145 Fix 8641HPCN timebase
59147 commit c86360b830f1eecd7a72208575dde4f57879faea
59148 Author: Zhang Wei <wei.zhang@freescale.com>
59149 Date: Fri Jul 28 00:01:34 2006 +0800
59151 Fixed OF device tree of mpc86xxhpcn board.
59153 The changes works in with kernel irq mapping rework.
59155 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
59157 commit bea3f28d285942bf3f7ab339ce85178ded544225
59158 Author: Haiying Wang <haiying.wang@freescale.com>
59159 Date: Wed Jul 12 10:48:05 2006 -0400
59161 Add support for reading and writing mac addresses to or from ID EEPROM.
59163 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
59164 With attached patch, we can use command "mac/mac read/mac save/"
59165 to read and write EEPROM under u-boot prompt.
59167 U-boot will calculate the checksum of EEPROM while bootup,
59168 if it is right, then u-boot will check whether the mac address
59169 of eTSEC0/1/2/3 is availalbe (non-zero).
59171 If there is mac address availabe in EEPROM, u-boot will use it,
59172 otherewise, u-boot will use the mac address defined in
59173 MPC8641HPCN.h. This matches the requirement to set unique mac address
59174 for each TSEC port.
59176 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
59177 Signed-off-by: York Sun <yorksun@freescale.com>
59179 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
59180 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
59181 Date: Thu Jul 13 10:35:10 2006 -0500
59183 Fixed initrd issue by define big RAM
59185 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
59187 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
59188 Author: Jason Jin <Jason.jin@freescale.com>
59189 Date: Fri Jul 7 10:01:45 2006 -0500
59191 We made a u-boot patch to fix the hang up issue
59192 when booting filesystem from ramdisk.
59194 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
59196 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
59197 Author: Matthew McClintock <msm@freescale.com>
59198 Date: Wed Jun 28 10:47:03 2006 -0500
59200 * Switched default PCI speed for 8540 ADS back to 33MHz
59201 * Added comments and a printf to warn that PCI-X won't
59203 Patch by Andy Fleming 17-Mar-2006
59205 Signed-off-by: Andy Fleming <afleming@freescale.com>
59207 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
59208 Author: Matthew McClintock <msm@freescale.com>
59209 Date: Wed Jun 28 10:46:35 2006 -0500
59211 * Fixed a bug where 8555 PCI code used the old variable and
59213 Patch by Andy Fleming 17-Mar-2006
59215 Signed-off-by: Andy Fleming <afleming@freescale.com>
59217 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
59218 Author: Matthew McClintock <msm@freescale.com>
59219 Date: Wed Jun 28 10:46:13 2006 -0500
59221 * Added VIA configuration table
59222 * Added support for PCI2 on CDS
59223 Patch by Andy Fleming 17-Mar-2006
59225 Signed-off-by: Andy Fleming <afleming@freescale.com>
59227 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
59228 Author: Matthew McClintock <msm@freescale.com>
59229 Date: Wed Jun 28 10:45:41 2006 -0500
59231 * Fixed PCI memory definitions
59232 Patch by Andy Fleming 17-Mar-2006
59234 Signed-off-by: Andy Fleming <afleming@freescale.com>
59236 commit 087454609e47295443af793a282cddcd91a5f49c
59237 Author: Matthew McClintock <msm@freescale.com>
59238 Date: Wed Jun 28 10:45:17 2006 -0500
59240 * Added support for initializing second PCI bus on 85xx
59241 Patch by Andy Fleming 17-Mar-2006
59243 Signed-off-by: Andy Fleming <afleming@freescale.com>
59245 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
59246 Author: Matthew McClintock <msm@freescale.com>
59247 Date: Wed Jun 28 10:44:49 2006 -0500
59249 * Added PCI-X #defines for PCI-X initialization
59250 Patch by Andy Fleming on 17-Mar-2006
59252 Signed-off-by: Andy Fleming <afleming@freescale.com>
59254 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
59255 Author: Matthew McClintock <msm@freescale.com>
59256 Date: Wed Jun 28 10:44:23 2006 -0500
59258 * Made sure the code which disables prefetch for PCI devices
59259 sets the size of the prefetch region to 0
59260 Patch by Andy Fleming on 17-Mar-2006
59262 Signed-off-by: Andy Fleming <afleming@freescale.com>
59264 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
59265 Author: Matthew McClintock <msm@freescale.com>
59266 Date: Wed Jun 28 10:43:36 2006 -0500
59268 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
59269 Patch by Jon Loeliger 17-Jan-2006
59271 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59273 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
59274 Author: Matthew McClintock <msm@freescale.com>
59275 Date: Wed Jun 28 10:43:00 2006 -0500
59277 * Removed the oftree.dts for stxxtx in light of the changes
59278 to the flat device tree handling code
59279 Patch by Matthew McClintock 26-June-2006
59281 commit 1b380ec225665e73959677f3893dc658c5925e05
59282 Author: Matthew McClintock <msm@freescale.com>
59283 Date: Wed Jun 28 10:42:24 2006 -0500
59285 * Patch to modify ft_build.c to update flat device trees in place
59286 Patch by Matthew McClintock 26-June-2006
59288 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
59289 Author: Matthew McClintock <msm@freescale.com>
59290 Date: Wed Jun 28 10:41:37 2006 -0500
59292 * Modify bootm command to support booting with flat device trees
59293 Patch by Matthew McClintock 26-June-2006
59295 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
59296 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
59297 Date: Wed Jun 28 08:43:56 2006 -0500
59299 Change Id to symbolic name for RTL8139
59301 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
59303 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
59304 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
59305 Date: Tue Jun 27 18:12:10 2006 +0800
59307 Fix RTL8139 in big endian
59309 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
59310 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
59312 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
59313 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
59314 Date: Tue Jun 27 18:12:23 2006 +0800
59316 Fix Tsec bug when no link
59318 When tftp a non-exist file from the tftp server, u-boot will check
59319 the link of all eth port. The original file will return wrong link
59320 state on the no link ports.
59322 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
59324 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
59325 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
59326 Date: Tue Jun 27 18:12:02 2006 +0800
59328 Fix bug for io_bar size during pci scan
59330 During the pci scan process, Some devices return bar_reponse with the
59331 highest bytes 0, such as the pci bridge in uli1575 return bar_response
59332 with 0xffffff, So the bar_size should be manually set under 64K.
59334 Signed-off-by: Jason Jin <jason.jin@freescale.com>
59336 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
59337 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
59338 Date: Tue Jun 27 18:11:54 2006 +0800
59340 Enable PCIE1 for MPC8641HPCN board
59342 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
59344 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
59345 Author: Wolfgang Denk <wd@pollux.denx.de>
59346 Date: Mon Jun 26 11:06:00 2006 +0200
59350 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
59351 Author: Jon Loeliger <jdl@freescale.com>
59352 Date: Thu Jun 22 08:51:46 2006 -0500
59354 Fix bug in 8641hpcn reset command with no args.
59356 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
59357 Acked-by: Jon Loeliger <jdl@freescale.com>
59359 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
59360 Author: Zhang Wei <wei.zhang@freescale.com>
59361 Date: Tue Jun 20 17:47:15 2006 +0800
59363 Reworked IRQ mapping in OF-tree.
59365 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
59366 Author: Jon Loeliger <jdl@freescale.com>
59367 Date: Thu Jun 15 21:33:37 2006 -0500
59369 Do not enable address translation on secondary CPUs.
59370 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
59372 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59374 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
59375 Author: Wolfgang Denk <wd@pollux.denx.de>
59376 Date: Wed Jun 14 18:14:56 2006 +0200
59380 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
59381 Author: Wolfgang Denk <wd@pollux.denx.de>
59382 Date: Wed Jun 14 17:45:53 2006 +0200
59384 Various USB related patches
59385 - Add support for mpc8xx USB device.
59386 - Add support for Common Device Class - Abstract Control Model USB console.
59387 - Add support for flow control in USB slave devices.
59388 - Add support for switching between gserial and cdc_acm using environment.
59389 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
59390 - Update usbcore slightly to ease host enumeration.
59391 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
59392 - Add AdderUSB_config as a defconfig to enable usage of the USB console
59393 by default with the Adder87x U-Boot port.
59394 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
59396 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
59397 Author: Jon Loeliger <jdl@jdl.com>
59398 Date: Wed Jun 7 10:53:55 2006 -0500
59400 Fix a get_board_sys_clk() use-before-def warning.
59402 Signed-off-by: Jon Loeliger <jdl@jdl.com>
59404 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
59405 Author: Jon Loeliger <jdl@jdl.com>
59406 Date: Wed Jun 7 10:52:49 2006 -0500
59408 Allow DTC path to be passed in.
59410 Signed-off-by: Jon Loeliger <jdl@jdl.com>
59412 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
59413 Author: Haiying Wang <haiying.wang@freescale.com>
59414 Date: Tue Jun 6 16:54:29 2006 -0400
59416 Modify the IRQ of DUART2
59418 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
59419 Author: Jon Loeliger <jdl@jdl.com>
59420 Date: Wed May 31 13:55:35 2006 -0500
59424 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59426 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
59427 Author: Jon Loeliger <jdl@jdl.com>
59428 Date: Wed May 31 12:44:44 2006 -0500
59430 White space cleanup.
59431 Some 80-column cleanups.
59432 Convert printf() to puts() where possible.
59433 Use #include "spd_sdram.h" as needed.
59434 Enhanced reset command usage message a bit.
59436 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59438 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
59439 Author: Jon Loeliger <jdl@jdl.com>
59440 Date: Wed May 31 11:39:34 2006 -0500
59442 Removed unneeded local_bus_init() from 8641HPCN board.
59444 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59446 commit 4d3d729c16c392d2982d3266b659d333c927697d
59447 Author: Jon Loeliger <jdl@jdl.com>
59448 Date: Wed May 31 11:24:28 2006 -0500
59450 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
59452 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59454 commit b2a941de060350ad15878d8219825f4950e9bb8e
59455 Author: Jon Loeliger <jdl@jdl.com>
59456 Date: Wed May 31 10:07:28 2006 -0500
59458 Remove dead debug code.
59460 Signed-off-by: Jon Loeliger <jdl@jdl.com>
59462 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
59463 Author: Jon Loeliger <jdl@freescale.com>
59464 Date: Tue May 30 17:47:00 2006 -0500
59466 Move mpc86xx PIXIS code to board directory
59468 First cut at moving the PIXIS platform code out of
59469 the 86xx cpu directory and into board/mpc8641hpcn
59472 Signed-off-by: Jon Loeliger <jdl@freescale.com>
59474 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
59475 Author: Markus Klotzbuecher <mk@denx.de>
59476 Date: Tue May 30 16:56:14 2006 +0200
59478 Support generic OHCI support for the s3c24x0 cpu.
59480 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
59481 Author: Haiying Wang <Haiying.Wang@freescale.com>
59482 Date: Tue May 30 09:10:32 2006 -0500
59484 Improve "reset" command's interaction with watchdog.
59486 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
59487 "reset altbank wd" will reset another bank WITH watch dog enabled
59488 "diswd" will disable watch dog after u-boot boots up successfully
59490 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
59492 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
59493 Author: Haiying Wang <Haiying.Wang@freescale.com>
59494 Date: Tue May 30 08:51:19 2006 -0500
59496 Fix two SDRAM setup bugs.
59499 Enable 1T/2T based on number of DIMMs present.
59501 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
59503 commit d11fec5015334deb2010e36ce00bb118cc5429a5
59504 Author: Haiying Wang <Haiying.Wang@freescale.com>
59505 Date: Fri May 26 10:24:48 2006 -0500
59507 Add first draft of the MPC8641HPCN doc/README.
59509 Signed-off-by: Jon Loeliger <jdl@jdl.com>
59511 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
59512 Author: Haiying Wang <Haiying.Wang@freescale.com>
59513 Date: Fri May 26 10:13:04 2006 -0500
59515 Added pci@8000 block.
59516 Updated ethernet interrupt mappings (moved up 48).
59517 Cleaned up a few comments.
59519 Signed-off-by: Jon Loeliger <jdl@jdl.com>
59521 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
59522 Author: Haiying Wang <Haiying.Wang@freescale.com>
59523 Date: Fri May 26 10:01:16 2006 -0500
59525 Allow args on reset command.
59527 Signed-off-by: Jon Loeliger <jdl@jdl.com>
59529 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
59530 Author: Markus Klotzbuecher <mk@denx.de>
59531 Date: Tue May 23 13:38:35 2006 +0200
59533 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
59534 fixes to the latter.
59536 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
59537 Author: Markus Klotzbuecher <mk@denx.de>
59538 Date: Tue May 23 10:33:11 2006 +0200
59540 More cleanup for the delta board and the generic usb_ohci driver. Added
59541 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
59542 initialization and cleanup hooks respectively.
59544 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
59545 Author: Markus Klotzbuecher <mk@denx.de>
59546 Date: Mon May 22 16:33:54 2006 +0200
59548 This patch adds USB storage support for the delta board. This is the first
59549 board to make use of a generic OHCI driver, that calls hooks for board
59550 dependant initialization.
59552 commit 14e37081ff3cac7ebe6e93836523429853b6b292
59553 Author: Jon Loeliger <jdl@jdl.com>
59554 Date: Fri May 19 13:28:39 2006 -0500
59556 Change arbitration to round-robin for SMP linux.
59558 commit 9a655876e5995be80f49054e2509500e871e4d3a
59559 Author: Jon Loeliger <jdl@jdl.com>
59560 Date: Fri May 19 13:26:34 2006 -0500
59562 Enable dual DDR controllers and interleaving.
59564 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
59565 Author: Jon Loeliger <jdl@jdl.com>
59566 Date: Fri May 19 13:22:44 2006 -0500
59568 Update 86xx address map and LAWBARs.
59570 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
59571 Author: Jon Loeliger <jdl@jdl.com>
59572 Date: Fri May 19 13:14:15 2006 -0500
59574 Remove L2 Cache invalidate polling.
59576 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
59577 Author: Jon Loeliger <jdl@jdl.com>
59578 Date: Fri May 19 12:33:09 2006 -0500
59580 Enable 2nd CPU and I2C.
59582 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
59583 Author: Jon Loeliger <jdl@freescale.com>
59584 Date: Mon May 15 07:26:56 2006 -0500
59586 Update interrupt mapping.
59588 commit 6cfea33477b04b63ed47386ed1629529484c33ba
59589 Author: Haiying Wang <Haiying.Wang@freescale.com>
59590 Date: Wed May 10 09:38:06 2006 -0500
59592 Remove unneeded INIT_RAM_LOCK cache twiddling.
59593 Correctly tracks r29 as global data pointer now.
59595 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
59597 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
59598 Author: Jon Loeliger <jdl@freescale.com>
59599 Date: Wed May 10 09:33:07 2006 -0500
59601 Remove unnecessary flash.c file.
59603 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
59604 Author: Jon Loeliger <jdl@freescale.com>
59605 Date: Tue May 9 08:23:49 2006 -0500
59607 Get MPC8641HPCN flash images working.
59609 Enable the CFI driver.
59610 Remove bogus LAWBAR7 cruft.
59611 Use correct TEXT_BASE, Fixup load script.
59612 Enable SPD EEPROM during DDR setup.
59613 Use generic RFC 1918 IP addresses by default.
59615 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
59616 Author: Jon Loeliger <jdl@freescale.com>
59617 Date: Thu Apr 27 10:15:16 2006 -0500
59619 Cleanup whitespaces and style issues.
59620 Removed //-style comments.
59621 Use 80-column lines.
59622 Remove trailing whitespace.
59623 Remove dead code and debug cruft.
59625 commit a2320a6bf8113a09544c42d160d10ac69d049a03
59626 Author: Jon Loeliger <jdl@freescale.com>
59627 Date: Thu Apr 27 08:22:39 2006 -0500
59629 Revert bad PCI prefetch limit change.
59631 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
59632 Author: Jon Loeliger <jdl@freescale.com>
59633 Date: Wed Apr 26 17:58:56 2006 -0500
59635 Initial support for MPC8641 HPCN board.